Database of Physiological Parameters for Early Life Rats and Mice

Data.gov (United States)

U.S. Environmental Protection Agency — The Database of Physiological Parameters for Early Life Rats and Mice provides information based on scientific literature about physiological parameters. Modelers...

Application Of Database Program in selecting Sorghum (Sorghum bicolor L) Mutant Lines

International Nuclear Information System (INIS)

H, Soeranto

2000-01-01

Computer database software namely MSTAT and paradox have been exercised in the field of mutation breeding especially in the process of selecting plant mutant lines of sorghum. In MSTAT, selecting mutant lines can be done by activating the SELECTION function and then followed by entering mathematical formulas for the selection criterion. Another alternative is by defining the desired selection intensity to the analysis results of subprogram SORT. Including the selected plant mutant lines in BRSERIES program, it will make their progenies be easier to be traced in subsequent generations. In paradox, an application program for selecting mutant lines can be made by combining facilities of Table, form and report. Selecting mutant lines with defined selection criterion can easily be done through filtering data. As a relation database, paradox ensures that the application program for selecting mutant lines and progeny trachings, can be made easier, efficient and interactive

Fourier transform measurements of water vapor line parameters in the 4200-6600 cm{sup -1} region

Energy Technology Data Exchange (ETDEWEB)

Jenouvrier, Alain [Groupe de Spectrometrie Moleculaire et Atmospherique, UMR CNRS 6089, UFR Sciences, Moulin de la Housse, B.P. 1039, 51067 Reims Cedex 2 (France)]. E-mail: alain.jenouvrier@univ-reims.fr; Daumont, Ludovic [Groupe de Spectrometrie Moleculaire et Atmospherique, UMR CNRS 6089, UFR Sciences, Moulin de la Housse, B.P. 1039, 51067 Reims Cedex 2 (France); Regalia-Jarlot, Laurence [Groupe de Spectrometrie Moleculaire et Atmospherique, UMR CNRS 6089, UFR Sciences, Moulin de la Housse, B.P. 1039, 51067 Reims Cedex 2 (France); Tyuterev, Vladimir G. [Groupe de Spectrometrie Moleculaire et Atmospherique, UMR CNRS 6089, UFR Sciences, Moulin de la Housse, B.P. 1039, 51067 Reims Cedex 2 (France); Carleer, Michel [Service de Chimie Quantique et de Photophysique, CP 160/09, Universite Libre de Bruxelles, 50 Av. F.D. Roosevelt, B-1050 Brussels (Belgium); Vandaele, Ann Carine [Institut d' Aeronomie Spatiale de Belgique, Av. Circulaire 3, B-1180 Brussels (Belgium); Mikhailenko, Semen [Laboratory of Theoretical Spectroscopy, Institute of Atmospheric Optics, Russian Academy of Sciences, 1, Av. Akademichesskii, 634055 Tomsk (Russian Federation); Fally, Sophie [Service de Chimie Quantique et de Photophysique, CP 160/09, Universite Libre de Bruxelles, 50 Av. F.D. Roosevelt, B-1050 Brussels (Belgium)

2007-06-15

New high-resolution water vapor absorption spectra were obtained at room temperature in the 4200-6600 cm{sup -1} spectral region by combining Fourier transform spectrometers (FTS) with single and multiple reflection cells. With absorption paths from 0.3 to 1800 m in pure and air diluted water vapor, accurate measurements of about 10400 lines in an intensity range from 10{sup -29} to 10{sup -19} cm/molecule have been performed. Positions, intensities, self- and air-broadening coefficients and air-induced shifts were determined for the H{sub 2} {sup 16}O, H{sub 2} {sup 17}O, H{sub 2} {sup 18}O and HDO isotopologues. The rovibrational assignment of the observed lines was performed with the use of global variational predictions and allowed the identification of several new energy levels. One major contribution of this work consists of the identification of 3280 new weak lines. A very close agreement between the new measured parameters and those listed in the database is reported as well as between the observations and the most recent variational calculations for the positions and the intensities. The present parameters provide an extended and homogeneous data set for water vapor, which is shown to significantly improve the databases for atmospheric applications, especially in the transmission windows on both sides of the band centered at 5400 cm{sup -1}.

The ING Seismic Network Databank (ISND : a friendly parameters and waveform database

Directory of Open Access Journals (Sweden)

G. Smriglio

1995-06-01

Full Text Available he Istituto Nazionale di Geofisica (ING Seismic Network Database (ISND includes over 300000 arrivaI times of Italian, Mediterranean and teleseismic earthquakes from 1983 to date. This database is a useful tool for Italian and foreign seismologists ( over 1000 data requests in the first 6 months of this year. Recently (1994 the ING began storing in the ISND, the digital waveforms associated with arri,Tal times and experimen- tally allowed users to retrieve waveforms recorded by the ING acquisition system. In this paper we describe the types of data stored and the interactive and batch procedures available to obtain arrivaI times and/or asso- ciated waveforms. The ISND is reachable via telephone line, P.S.I., Internet and DecNet. Users can read and send to their E-mail address alI selected earthquakes locations, parameters, arrivaI times and associated digital waveforms (in SAC, SUDS or ASCII format. For r;aedium or large amounts of data users can ask to receive data by means of magnetic media (DAT, Video 8, floppy disk.

Measurement-Based Transmission Line Parameter Estimation with Adaptive Data Selection Scheme

DEFF Research Database (Denmark)

Li, Changgang; Zhang, Yaping; Zhang, Hengxu

2017-01-01

Accurate parameters of transmission lines are critical for power system operation and control decision making. Transmission line parameter estimation based on measured data is an effective way to enhance the validity of the parameters. This paper proposes a multi-point transmission line parameter...

Updated database plus software for line-mixing in CO2 infrared spectra and their test using laboratory spectra in the 1.5-2.3 μm region

International Nuclear Information System (INIS)

Lamouroux, J.; Tran, H.; Laraia, A.L.; Gamache, R.R.; Rothman, L.S.; Gordon, I.E.; Hartmann, J.-M.

2010-01-01

In a previous series of papers, a model for the calculation of CO 2 -air absorption coefficients taking line-mixing into account and the corresponding database/software package were described and widely tested. In this study, we present an update of this package, based on the 2008 version of HITRAN, the latest currently available. The spectroscopic data for the seven most-abundant isotopologues are taken from HITRAN. When the HITRAN data are not complete up to J''=70, the data files are augmented with spectroscopic parameters from the CDSD-296 database and the high-temperature CDSD-1000 if necessary. Previously missing spectroscopic parameters, the air-induced pressure shifts and CO 2 line broadening coefficients with H 2 O, have been added. The quality of this new database is demonstrated by comparisons of calculated absorptions and measurements using CO 2 high-pressure laboratory spectra in the 1.5-2.3 μm region. The influence of the imperfections and inaccuracies of the spectroscopic parameters from the 2000 version of HITRAN is clearly shown as a big improvement of the residuals is observed by using the new database. The very good agreements between calculated and measured absorption coefficients confirm the necessity of the update presented here and further demonstrate the importance of line-mixing effects, especially for the high pressures investigated here. The application of the updated database/software package to atmospheric spectra should result in an increased accuracy in the retrieval of CO 2 atmospheric amounts. This opens improved perspectives for the space-borne detection of carbon dioxide sources and sinks.

Good control practices underlined by an on-line fuzzy control database

Directory of Open Access Journals (Sweden)

Alonso, M. V.

1994-04-01

Full Text Available In the olive oil trade, control systems that automate extraction processes, cutting production costs and increasing processing capacity without losing quality, are always desirable. The database structure of an on-line fuzzy control of centrifugation systems and the algorithms used to attain the best control conditions are analysed. Good control practices are suggested to obtain virgin olive oil of prime quality.

In the olive oil trade, control systems that automate extraction processes, cutting production costs and increasing processing capacity without losing quality, are always desirable. The database structure of an on-line fuzzy control of centrifugation systems and the algorithms used to attain the best control conditions are analysed. Good control practices are suggested to obtain virgin olive oil of prime quality.

DianaHealth.com, an On-Line Database Containing Appraisals of the Clinical Value and Appropriateness of Healthcare Interventions: Database Development and Retrospective Analysis.

Science.gov (United States)

Bonfill, Xavier; Osorio, Dimelza; Solà, Ivan; Pijoan, Jose Ignacio; Balasso, Valentina; Quintana, Maria Jesús; Puig, Teresa; Bolibar, Ignasi; Urrútia, Gerard; Zamora, Javier; Emparanza, José Ignacio; Gómez de la Cámara, Agustín; Ferreira-González, Ignacio

2016-01-01

To describe the development of a novel on-line database aimed to serve as a source of information concerning healthcare interventions appraised for their clinical value and appropriateness by several initiatives worldwide, and to present a retrospective analysis of the appraisals already included in the database. Database development and a retrospective analysis. The database DianaHealth.com is already on-line and it is regularly updated, independent, open access and available in English and Spanish. Initiatives are identified in medical news, in article references, and by contacting experts in the field. We include appraisals in the form of clinical recommendations, expert analyses, conclusions from systematic reviews, and original research that label any health care intervention as low-value or inappropriate. We obtain the information necessary to classify the appraisals according to type of intervention, specialties involved, publication year, authoring initiative, and key words. The database is accessible through a search engine which retrieves a list of appraisals and a link to the website where they were published. DianaHealth.com also provides a brief description of the initiatives and a section where users can report new appraisals or suggest new initiatives. From January 2014 to July 2015, the on-line database included 2940 appraisals from 22 initiatives: eleven campaigns gathering clinical recommendations from scientific societies, five sets of conclusions from literature review, three sets of recommendations from guidelines, two collections of articles on low clinical value in medical journals, and an initiative of our own. We have developed an open access on-line database of appraisals about healthcare interventions considered of low clinical value or inappropriate. DianaHealth.com could help physicians and other stakeholders make better decisions concerning patient care and healthcare systems sustainability. Future efforts should be focused on

DianaHealth.com, an On-Line Database Containing Appraisals of the Clinical Value and Appropriateness of Healthcare Interventions: Database Development and Retrospective Analysis.

Directory of Open Access Journals (Sweden)

Xavier Bonfill

Full Text Available To describe the development of a novel on-line database aimed to serve as a source of information concerning healthcare interventions appraised for their clinical value and appropriateness by several initiatives worldwide, and to present a retrospective analysis of the appraisals already included in the database.Database development and a retrospective analysis. The database DianaHealth.com is already on-line and it is regularly updated, independent, open access and available in English and Spanish. Initiatives are identified in medical news, in article references, and by contacting experts in the field. We include appraisals in the form of clinical recommendations, expert analyses, conclusions from systematic reviews, and original research that label any health care intervention as low-value or inappropriate. We obtain the information necessary to classify the appraisals according to type of intervention, specialties involved, publication year, authoring initiative, and key words. The database is accessible through a search engine which retrieves a list of appraisals and a link to the website where they were published. DianaHealth.com also provides a brief description of the initiatives and a section where users can report new appraisals or suggest new initiatives. From January 2014 to July 2015, the on-line database included 2940 appraisals from 22 initiatives: eleven campaigns gathering clinical recommendations from scientific societies, five sets of conclusions from literature review, three sets of recommendations from guidelines, two collections of articles on low clinical value in medical journals, and an initiative of our own.We have developed an open access on-line database of appraisals about healthcare interventions considered of low clinical value or inappropriate. DianaHealth.com could help physicians and other stakeholders make better decisions concerning patient care and healthcare systems sustainability. Future efforts should be

Parameters for Organism Grouping - Gclust Server | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Gclust Server Parameters for Organism Grouping Data detail Data name Parameters for Organism...his Database Site Policy | Contact Us Parameters for Organism Grouping - Gclust Server | LSDB Archive ...

A database for the storage of quality control parameters

International Nuclear Information System (INIS)

Alves, J.G.; Abrantes, J.N.; Rangel, S.; Santos, L.

2005-01-01

Full text: The Individual Monitoring Service at ITN-DPRSN is based on a TLD dosimetry system, that consists of two 6600 Harshaw TLD readers and an the Harshaw 8814 TL card and holder containing two LiF:Mg,Ti (TLD-100) detectors for the evaluation of H p (10) and H p (0.07). A database for the storage of quality control parameters was created using MS Access and is presented in this work. At the moment, the database has a passive role and is used for storage of data and for the retrospective statistical evaluation of important parameters and their evolution with time. lt is regularly fed with the files generated by the NETREMS and/or WINREMS software from Harshaw (presently Thermo Electron Corporation), and allows a quick and user friendly visualization of the data. At present, the information stored therein is: The individual efficiency correction coefficients (ecc) for the card population determined for every TLD card prior to a first use, and their identification as quality control, zero, field and bad cards; The results of the start up daily tests, automatically performed before readouts, e.g. average and relative standard deviation of ten measurements of the temperature, high voltage, ±15 V, D/A reference, ground, internal reference light (RL) source intensity and the photomultiplier tube (PMT) noise; The daily list of readings of the pre-irradiated and unirradiated cards, inter-spaced with field cards at regular intervals, as well as the readings of the PMT noise and the RL intensity, performed at regular intervals during readouts. The average daily readings and their respective standard deviation are also stored; the reader calibration factors (RCF) determined every month at the beginning of a monitoring period; the calibration factor for the 90 Sr-- 90 Y internal irradiator, determined on a monthly basis; the linearity parameters derived from the linear regression curves, performed every month. The insertion of data is determined by each parameter

Infrared spectral line parameters of HBr and DBr at elevated temperatures

International Nuclear Information System (INIS)

Stocker, R.N.; Goldman, A.

1976-01-01

The electric dipole matrix elements for pure rotation and vibration-rotation transitions, with /m/<=40 and v<=v'<=6, having derived for HBr and DBr by using the Rydberg-Klein-Rees (RKR) potentials and numerical solutions of the Schroedinger equation. An improved dipole-moment expansion was determined by fitting these matrix elements to the available experimental data on line intensities. A least squares analysis of the available line position constants gave an improved set of Dunham coefficients good for spectral lines with both large and small quantum numbers v and J. The results were then used to generate a compilation of individual line parameters for the Δv = 1 bands of HBr and DBr at temperatures up to 3000 K. These parameters, together with previously compiled line parameters for HCl, HF, CO and NO, are being used for line-by-line calculations of radiance from a hot source as seen through an atmospheric path. (author)

EXPANDING ACADEMIC VOCABULARY WITH AN INTERACTIVE ON-LINE DATABASE

Directory of Open Access Journals (Sweden)

Marlise Horst

2005-05-01

Full Text Available University students used a set of existing and purpose-built on-line tools for vocabulary learning in an experimental ESL course. The resources included concordance, dictionary, cloze-builder, hypertext, and a database with interactive self-quizzing feature (all freely available at www.lextutor.ca. The vocabulary targeted for learning consisted of (a Coxhead's (2000 Academic Word List, a list of items that occur frequently in university textbooks, and (b unfamiliar words students had met in academic texts and selected for entry into the class database. The suite of tools were designed to foster retention by engaging learners in deep processing, an aspect that is often described as missing in computer exercises for vocabulary learning. Database entries were examined to determine whether context sentences supported word meanings adequately and whether entered words reflected the unavailability of cognates in the various first languages of the participants. Pre- and post-treatment performance on tests of knowledge of words targeted for learning in the course were compared to establish learning gains. Regression analyses investigated connections between use of specific computer tools and gains.

Project Parameter Estimation on the Basis of an Erp Database

Directory of Open Access Journals (Sweden)

Relich Marcin

2013-12-01

Full Text Available Nowadays, more and more enterprises are using Enterprise Resource Planning (EPR systems that can also be used to plan and control the development of new products. In order to obtain a project schedule, certain parameters (e.g. duration have to be specified in an ERP system. These parameters can be defined by the employees according to their knowledge, or can be estimated on the basis of data from previously completed projects. This paper investigates using an ERP database to identify those variables that have a significant influence on the duration of a project phase. In the paper, a model of knowledge discovery from an ERP database is proposed. The presented method contains four stages of the knowledge discovery process such as data selection, data transformation, data mining and interpretation of patterns in the context of new product development. Among data mining techniques, a fuzzy neural system is chosen to seek relationships on the basis of data from completed projects stored in an ERP system.

The Fluka Linebuilder and Element Database: Tools for Building Complex Models of Accelerators Beam Lines

CERN Document Server

Mereghetti, A; Cerutti, F; Versaci, R; Vlachoudis, V

2012-01-01

Extended FLUKA models of accelerator beam lines can be extremely complex: heavy to manipulate, poorly versatile and prone to mismatched positioning. We developed a framework capable of creating the FLUKA model of an arbitrary portion of a given accelerator, starting from the optics configuration and a few other information provided by the user. The framework includes a builder (LineBuilder), an element database and a series of configuration and analysis scripts. The LineBuilder is a Python program aimed at dynamically assembling complex FLUKA models of accelerator beam lines: positions, magnetic fields and scorings are automatically set up, and geometry details such as apertures of collimators, tilting and misalignment of elements, beam pipes and tunnel geometries can be entered at user’s will. The element database (FEDB) is a collection of detailed FLUKA geometry models of machine elements. This framework has been widely used for recent LHC and SPS beam-machine interaction studies at CERN, and led to a dra...

Highlights of the HITRAN2016 database

Science.gov (United States)

Gordon, I.; Rothman, L. S.; Hill, C.; Kochanov, R. V.; Tan, Y.

2016-12-01

The HITRAN2016 database will be released just before the AGU meeting. It is a titanic effort of world-wide collaboration between experimentalists, theoreticians and atmospheric scientists, who measure, calculate and validate the HITRAN data. The line-by-line lists for almost all of the HITRAN molecules were updated in comparison with the previous compilation HITRAN2012 [1] that has been in use, along with some intermediate updates, since 2012. The extent of the updates ranges from updating a few lines of certain molecules to complete replacements of the lists and introduction of additional isotopologues. Many more vibrational bands were added to the database, extending the spectral coverage and completeness of the datasets. For several molecules, including H2O, CO2 and CH4, the extent of the updates is so complex that separate task groups were assembled to make strategic decisions about the choices of sources for various parameters in different spectral regions. The amount of parameters has also been significantly increased, now incorporating, for instance, non-Voigt line profiles [2]; broadening by gases other than air and "self" [3]; and other phenomena, including line mixing. In addition, the amount of cross-sectional sets in the database has increased dramatically and includes many recent experiments as well as adaptation of the existing databases that were not in HITRAN previously (for instance the PNNL database [4]). The HITRAN2016 edition takes full advantage of the new structure and interface available at www.hitran.org [5] and the HITRAN Application Programming Interface [6]. This poster will provide a summary of the updates, emphasizing details of some of the most important or dramatic improvements. The users of the database will have an opportunity to discuss the updates relevant to their research and request a demonstration on how to work with the database. This work is supported by the NASA PATM (NNX13AI59G), PDART (NNX16AG51G) and AURA (NNX14AI55G

Kalman filter estimation of RLC parameters for UMP transmission line

Directory of Open Access Journals (Sweden)

Mohd Amin Siti Nur Aishah

2018-01-01

Full Text Available This paper present the development of Kalman filter that allows evaluation in the estimation of resistance (R, inductance (L, and capacitance (C values for Universiti Malaysia Pahang (UMP short transmission line. To overcome the weaknesses of existing system such as power losses in the transmission line, Kalman Filter can be a better solution to estimate the parameters. The aim of this paper is to estimate RLC values by using Kalman filter that in the end can increase the system efficiency in UMP. In this research, matlab simulink model is developed to analyse the UMP short transmission line by considering different noise conditions to reprint certain unknown parameters which are difficult to predict. The data is then used for comparison purposes between calculated and estimated values. The results have illustrated that the Kalman Filter estimate accurately the RLC parameters with less error. The comparison of accuracy between Kalman Filter and Least Square method is also presented to evaluate their performances.

Establishing a database of radionuclide transfer parameters for freshwater wildlife

International Nuclear Information System (INIS)

Yankovich, T.; Beresford, N.A.; Fesenko, S.; Fesenko, J.; Phaneuf, M.; Dagher, E.; Outola, I.; Andersson, P.; Thiessen, K.; Ryan, J.; Wood, M.D.; Bollhöfer, A.

2013-01-01

Environmental assessments to evaluate potentials risks to humans and wildlife often involve modelling to predict contaminant exposure through key pathways. Such models require input of parameter values, including concentration ratios, to estimate contaminant concentrations in biota based on measurements or estimates of concentrations in environmental media, such as water. Due to the diversity of species and the range in physicochemical conditions in natural ecosystems, concentration ratios can vary by orders of magnitude, even within similar species. Therefore, to improve model input parameter values for application in aquatic systems, freshwater concentration ratios were collated or calculated from national grey literature, Russian language publications, and refereed papers. Collated data were then input into an international database that is being established by the International Atomic Energy Agency. The freshwater database enables entry of information for all radionuclides listed in ICRP (1983), in addition to the corresponding stable elements, and comprises a total of more than 16,500 concentration ratio (CR wo-water ) values. Although data were available for all broad wildlife groups (with the exception of birds), data were sparse for many organism types. For example, zooplankton, crustaceans, insects and insect larvae, amphibians, and mammals, for which there were CR wo-water values for less than eight elements. Coverage was most comprehensive for fish, vascular plants, and molluscs. To our knowledge, the freshwater database that has now been established represents the most comprehensive set of CR wo-water values for freshwater species currently available for use in radiological environmental assessments

Use of an INGRES database to implement the beam parameter management at GANIL

International Nuclear Information System (INIS)

Gillette, P.; Lecorche, E.; Lermine, P.; Maugeais, C.; Leboucher, Ch.; Moscatello, M.H.; Pain, P.

1995-01-01

Since the beginning of the operation driven by the new Ganil control system in February 1993, the relational database management system (RDBMS) Ingres has been more and more widely used. The most significant application relying on the RDBMS is the new beam parameter management which has been entirely redesigned. It has been operational since the end of the machine shutdown in July this year. After a short recall of the use of Ingres inside the control system, the organization of the parameter management is presented. Then the database implementation is shown, including the way how the physical aspects of the Ganil tuning have been integrated in such an environment. (author)

Quantum Walks on the Line with Phase Parameters

Science.gov (United States)

Villagra, Marcos; Nakanishi, Masaki; Yamashita, Shigeru; Nakashima, Yasuhiko

In this paper, a study on discrete-time coined quantum walks on the line is presented. Clear mathematical foundations are still lacking for this quantum walk model. As a step toward this objective, the following question is being addressed: Given a graph, what is the probability that a quantum walk arrives at a given vertex after some number of steps? This is a very natural question, and for random walks it can be answered by several different combinatorial arguments. For quantum walks this is a highly non-trivial task. Furthermore, this was only achieved before for one specific coin operator (Hadamard operator) for walks on the line. Even considering only walks on lines, generalizing these computations to a general SU(2) coin operator is a complex task. The main contribution is a closed-form formula for the amplitudes of the state of the walk (which includes the question above) for a general symmetric SU(2) operator for walks on the line. To this end, a coin operator with parameters that alters the phase of the state of the walk is defined. Then, closed-form solutions are computed by means of Fourier analysis and asymptotic approximation methods. We also present some basic properties of the walk which can be deducted using weak convergence theorems for quantum walks. In particular, the support of the induced probability distribution of the walk is calculated. Then, it is shown how changing the parameters in the coin operator affects the resulting probability distribution.

Recording Delphi off-line production activity in a meta-database

International Nuclear Information System (INIS)

Palermo, L.I.; Souza, M.J. de

1990-01-01

The Delphi experiment is expected to produce event data at a maximum rate of 50 cartridges per day of 200 Mbytes each. The resulting 'raw' data pass by several off-line processing steps, generating additional volume of data of different kinds. Moreover, movement and copies of data volumes manipulated by the researchers working in their home laboratories must be controlled. The (meta) data describing those real events as well as the large volume of simulated Monte Carlo data, constitute a meta-database, object of our work

Use of an INGRES database to implement the beam parameter management at GANIL

Energy Technology Data Exchange (ETDEWEB)

Gillette, P.; Lecorche, E.; Lermine, P.; Maugeais, C.; Leboucher, Ch.; Moscatello, M.H.; Pain, P.

1995-12-31

Since the beginning of the operation driven by the new Ganil control system in February 1993, the relational database management system (RDBMS) Ingres has been more and more widely used. The most significant application relying on the RDBMS is the new beam parameter management which has been entirely redesigned. It has been operational since the end of the machine shutdown in July this year. After a short recall of the use of Ingres inside the control system, the organization of the parameter management is presented. Then the database implementation is shown, including the way how the physical aspects of the Ganil tuning have been integrated in such an environment. (author). 2 refs.

Use of an INGRES database to implement the beam parameter management at GANIL

Energy Technology Data Exchange (ETDEWEB)

Gillette, P; Lecorche, E; Lermine, P; Maugeais, C; Leboucher, Ch; Moscatello, M H; Pain, P

1996-12-31

Since the beginning of the operation driven by the new Ganil control system in February 1993, the relational database management system (RDBMS) Ingres has been more and more widely used. The most significant application relying on the RDBMS is the new beam parameter management which has been entirely redesigned. It has been operational since the end of the machine shutdown in July this year. After a short recall of the use of Ingres inside the control system, the organization of the parameter management is presented. Then the database implementation is shown, including the way how the physical aspects of the Ganil tuning have been integrated in such an environment. (author). 2 refs.

Stark parameters of some asymmetrical Si II lines

International Nuclear Information System (INIS)

Ferhat, B; Azzouz, Y; Redon, R; Ripert, M; Lesage, A

2012-01-01

Six lines of SiII are experimentally studied in pulsed plasma generated by Nd :Yag laser breakdown on pure solid silicon target. A set of experimental Stark parameters of asymmetrical lines are measured in temperature range from 14 000 K to 18 000 K (using Boltzmann plot). Calculated values of the electron density (using Griem's formula) vary from 1.7 to 6.1 × 10 23 m −3 . Processed spectral lines are 333.982 nm (3s 2 4p -3s 2 6s) and 397.746 nm, 399.177 nm, 399.801 nm, 401.622 nm (3d' 2 F 0 -4f' 4 G) and (3d' 2 F 0 - 4f' 2 G) of astrophysical interest. Asymmetrical line shapes are synthesized by a sum of two semi-Lorentzian distributions. The obtained fit is in good agreement with the measured spectra.

Einstein A-coefficients and statistical weights for molecular absorption transitions in the HITRAN database

International Nuclear Information System (INIS)

Simeckova, Marie; Jacquemart, David; Rothman, Laurence S.; Gamache, Robert R.; Goldman, Aaron

2006-01-01

This paper describes the calculation of the statistical weights and the Einstein A-coefficients for the 39 molecules and their associated isotopologues/isotopomers currently present in the line-by-line portion of the HITRAN database. Calculation of the Einstein A-coefficients was carried out using the HITRAN line intensities and the necessary statistical weights. The Einstein A-coefficient and the statistical weights of the upper and lower levels of the transition were added in the new format of the line parameters for the most recent edition of the HITRAN database

Updating parameters of the chicken processing line model

DEFF Research Database (Denmark)

Kurowicka, Dorota; Nauta, Maarten; Jozwiak, Katarzyna

2010-01-01

A mathematical model of chicken processing that quantitatively describes the transmission of Campylobacter on chicken carcasses from slaughter to chicken meat product has been developed in Nauta et al. (2005). This model was quantified with expert judgment. Recent availability of data allows...... updating parameters of the model to better describe processes observed in slaughterhouses. We propose Bayesian updating as a suitable technique to update expert judgment with microbiological data. Berrang and Dickens’s data are used to demonstrate performance of this method in updating parameters...... of the chicken processing line model....

Definition of a matrix of the generalized parameters asymmetrical multiphase transmission lines

Directory of Open Access Journals (Sweden)

Suslov V.M.

2005-12-01

Full Text Available Idle time, without introduction of wave characteristics, algorithm of definition of a matrix of the generalized parameters asymmetrical multiphase transmission lines is offered. Definition of a matrix of parameters is based on a matrix primary specific of parameters of line and simple iterative procedure. The amount of iterations of iterative procedure is determined by a set error of performance of the resulted matrix ratio between separate blocks of a determined matrix. The given error is connected by close image of with a margin error determined matrix.

The RHIC transfer line cable database

International Nuclear Information System (INIS)

Scholl, E.H.; Satogata, T.

1995-01-01

A cable database was created to facilitate and document installation of cables and wiring in the RHIC project, as well as to provide a data source to track possible wiring and signal problems. The eight tables of this relational database, currently implemented in Sybase, contain information ranging from cable routing to attenuation of individual wires. This database was created in a hierarchical scheme under the assumption that cables contain wires -- each instance of a cable has one to many wires associated with it. This scheme allows entry of information pertinent to individual wires while only requiring single entries for each cable. Relationships to other RHIC databases are also discussed

Database of emission lines

Science.gov (United States)

Binette, L.; Ortiz, P.; Joguet, B.; Rola, C.

1998-11-01

A widely accessible data bank (available through Netscape) and consiting of all (or most) of the emission lines reported in the litterature is being built. It will comprise objects as diverse as HII regions, PN, AGN, HHO. One of its use will be to define/refine existing diagnostic emission line diagrams.

A distributed parameter model of transmission line transformer for high voltage nanosecond pulse generation.

Science.gov (United States)

Li, Jiangtao; Zhao, Zheng; Li, Longjie; He, Jiaxin; Li, Chenjie; Wang, Yifeng; Su, Can

2017-09-01

A transmission line transformer has potential advantages for nanosecond pulse generation including excellent frequency response and no leakage inductance. The wave propagation process in a secondary mode line is indispensable due to an obvious inside transient electromagnetic transition in this scenario. The equivalent model of the transmission line transformer is crucial for predicting the output waveform and evaluating the effects of magnetic cores on output performance. However, traditional lumped parameter models are not sufficient for nanosecond pulse generation due to the natural neglect of wave propagations in secondary mode lines based on a lumped parameter assumption. In this paper, a distributed parameter model of transmission line transformer was established to investigate wave propagation in the secondary mode line and its influential factors through theoretical analysis and experimental verification. The wave propagation discontinuity in the secondary mode line induced by magnetic cores is emphasized. Characteristics of the magnetic core under a nanosecond pulse were obtained by experiments. Distribution and formation of the secondary mode current were determined for revealing essential wave propagation processes in secondary mode lines. The output waveform and efficiency were found to be affected dramatically by wave propagation discontinuity in secondary mode lines induced by magnetic cores. The proposed distributed parameter model was proved more suitable for nanosecond pulse generation in aspects of secondary mode current, output efficiency, and output waveform. In depth, comprehension of underlying mechanisms and a broader view of the working principle of the transmission line transformer for nanosecond pulse generation can be obtained through this research.

A phenome database (NEAUHLFPD) designed and constructed for broiler lines divergently selected for abdominal fat content.

Science.gov (United States)

Li, Min; Dong, Xiang-yu; Liang, Hao; Leng, Li; Zhang, Hui; Wang, Shou-zhi; Li, Hui; Du, Zhi-Qiang

2017-05-20

Effective management and analysis of precisely recorded phenotypic traits are important components of the selection and breeding of superior livestocks. Over two decades, we divergently selected chicken lines for abdominal fat content at Northeast Agricultural University (Northeast Agricultural University High and Low Fat, NEAUHLF), and collected large volume of phenotypic data related to the investigation on molecular genetic basis of adipose tissue deposition in broilers. To effectively and systematically store, manage and analyze phenotypic data, we built the NEAUHLF Phenome Database (NEAUHLFPD). NEAUHLFPD included the following phenotypic records: pedigree (generations 1-19) and 29 phenotypes, such as body sizes and weights, carcass traits and their corresponding rates. The design and construction strategy of NEAUHLFPD were executed as follows: (1) Framework design. We used Apache as our web server, MySQL and Navicat as database management tools, and PHP as the HTML-embedded language to create dynamic interactive website. (2) Structural components. On the main interface, detailed introduction on the composition, function, and the index buttons of the basic structure of the database could be found. The functional modules of NEAUHLFPD had two main components: the first module referred to the physical storage space for phenotypic data, in which functional manipulation on data can be realized, such as data indexing, filtering, range-setting, searching, etc.; the second module related to the calculation of basic descriptive statistics, where data filtered from the database can be used for the computation of basic statistical parameters and the simultaneous conditional sorting. NEAUHLFPD could be used to effectively store and manage not only phenotypic, but also genotypic and genomics data, which can facilitate further investigation on the molecular genetic basis of chicken adipose tissue growth and development, and expedite the selection and breeding of broilers

Catalogue of HI PArameters (CHIPA)

Science.gov (United States)

Saponara, J.; Benaglia, P.; Koribalski, B.; Andruchow, I.

2015-08-01

The catalogue of HI parameters of galaxies HI (CHIPA) is the natural continuation of the compilation by M.C. Martin in 1998. CHIPA provides the most important parameters of nearby galaxies derived from observations of the neutral Hydrogen line. The catalogue contains information of 1400 galaxies across the sky and different morphological types. Parameters like the optical diameter of the galaxy, the blue magnitude, the distance, morphological type, HI extension are listed among others. Maps of the HI distribution, velocity and velocity dispersion can also be display for some cases. The main objective of this catalogue is to facilitate the bibliographic queries, through searching in a database accessible from the internet that will be available in 2015 (the website is under construction). The database was built using the open source `` mysql (SQL, Structured Query Language, management system relational database) '', while the website was built with ''HTML (Hypertext Markup Language)'' and ''PHP (Hypertext Preprocessor)''.

Time-Varying FOPDT Modeling and On-line Parameter Identification

DEFF Research Database (Denmark)

Yang, Zhenyu; Sun, Zhen

2013-01-01

on the Mixed-Integer-Nonlinear Programming, Least-Mean-Square and sliding window techniques. The proposed approaches can simultaneously estimate the time-dependent system parameters, as well as the unknown disturbance input if it is the case, in an on-line manner. The proposed concepts and algorithms...

Speed dependence of CH335Cl–O2 line-broadening parameters probed on rotational transitions: Measurements and semi-classical calculations

International Nuclear Information System (INIS)

Buldyreva, J.; Margulès, L.; Motiyenko, R.A.; Rohart, F.

2013-01-01

Relaxation parameters for K-components (K≤6) of six J→J+1 rotational transitions (J=6, 10, 17, 22, 31 and 33) of CH 3 35 Cl perturbed by O 2 are measured at room temperature with Voigt, speed-dependent Voigt and Galatry profiles in order to probe the speed-dependence effects. With respect to the previous study of CH 3 35 Cl–N 2 system [Guinet et al., J Quant Spectrosc Radiat Transfer 2012;113:1113], higher active-gas pressures are reached, providing better signal-to-noise ratios, and the exact expression of the Beer–Lambert law is introduced in the fitting procedure, leading, among other advantages, to much more realistic low-pressure results. The broadening parameters of the considered lines are also computed by a semi-classical method for various relative velocities of colliders and the powers characterizing the dependence of the collisional cross-sections on relative speeds are deduced as functions of the rotational numbers J and K. Additional calculations performed with the Maxwell–Boltzmann distribution of velocities show no significant difference with the earlier results [Buldyreva et al., Phys Chem Chem Phys 2011;13:20326] obtained within the mean thermal velocity approximation. Weighted sums of the presently measured Voigt-profile O 2 -broadening parameters and of the previously published N 2 -broadening ones are calculated to yield experimental air-broadening coefficients for spectroscopic databases. -- Highlights: • Analysis of the speed dependence of relaxation rates of CH 3 Cl lines. • Introduction of the Beer–Lambert law in analysis of line-shapes recorded by FM technique. • Comparison of Maxwell–Boltzmann averaging and mean thermal velocity calculations. • Estimation of air-induced broadening for CH 3 Cl rotational lines

Database automation of accelerator operation

International Nuclear Information System (INIS)

Casstevens, B.J.; Ludemann, C.A.

1982-01-01

The Oak Ridge Isochronous Cyclotron (ORIC) is a variable energy, multiparticle accelerator that produces beams of energetic heavy ions which are used as probes to study the structure of the atomic nucleus. To accelerate and transmit a particular ion at a specified energy to an experimenter's apparatus, the electrical currents in up to 82 magnetic field producing coils must be established to accuracies of from 0.1 to 0.001 percent. Mechanical elements must also be positioned by means of motors or pneumatic drives. A mathematical model of this complex system provides a good approximation of operating parameters required to produce an ion beam. However, manual tuning of the system must be performed to optimize the beam quality. The database system was implemented as an on-line query and retrieval system running at a priority lower than the cyclotron real-time software. It was designed for matching beams recorded in the database with beams specified for experiments. The database is relational and permits searching on ranges of any subset of the eleven beam categorizing attributes. A beam file selected from the database is transmitted to the cyclotron general control software which handles the automatic slewing of power supply currents and motor positions to the file values, thereby replicating the desired parameters

Stark broadening parameters and transition probabilities of persistent lines of Tl II

Science.gov (United States)

de Andrés-García, I.; Colón, C.; Fernández-Martínez, F.

2018-05-01

The presence of singly ionized thallium in the stellar atmosphere of the chemically peculiar star χ Lupi was reported by Leckrone et al. in 1999 by analysis of its stellar spectrum obtained with the Goddard High Resolution Spectrograph (GHRS) on board the Hubble Space Telescope. Atomic data about the spectral line of 1307.50 Å and about the hyperfine components of the spectral lines of 1321.71 Å and 1908.64 Å were taken from different sources and used to analyse the isotopic abundance of thallium II in the star χ Lupi. From their results the authors concluded that the photosphere of the star presents an anomalous isotopic composition of Tl II. A study of the atomic parameters of Tl II and of the broadening by the Stark effect of its spectral lines (and therefore of the possible overlaps of these lines) can help to clarify the conclusions about the spectral abundance of Tl II in different stars. In this paper we present calculated values of the atomic transition probabilities and Stark broadening parameters for 49 spectral lines of Tl II obtained by using the Cowan code including core polarization effects and the Griem semiempirical approach. Theoretical values of radiative lifetimes for 11 levels (eight with experimental values in the bibliography) are calculated and compared with the experimental values in order to test the quality of our results. Theoretical trends of the Stark width and shift parameters versus the temperature for spectral lines of astrophysical interest are displayed. Trends of our calculated Stark width for the isoelectronic sequence Tl II-Pb III-Bi IV are also displayed.

Study of parameters of simultaneous lasing on two lines sharing an upper level

International Nuclear Information System (INIS)

Pikulev, A A

2002-01-01

Stationary lasing at two competing lines sharing an upper level is studied. Based on the expressions for the gain obtained earlier, the possible lasing regimes are considered (at one or two lines) and approximate formulas are derived for determining the output power in each line. These formulas are shown to be the generalisation of the Rigrod formula to the case of simultaneous lasing at several lines. (control of laser radiation parameters)

Expression of a LINE-1 endonuclease variant in gastric cancer: its association with clinicopathological parameters

International Nuclear Information System (INIS)

Wang, Gangshi; Wu, Benyan; Wang, Mengwei; Gao, Jie; Huang, Haili; Tian, Yu; Xue, Liyan; Wang, Weihua; You, Weidi; Lian, Hongwei; Duan, Xiaojian

2013-01-01

Long interspersed nuclear element-1 (LINE-1 or L1), the most abundant and only autonomously active family of non-LTR retrotransposons in the human genome, expressed not only in the germ lines but also in somatic tissues. It contributes to genetic instability, aging, and age-related diseases, such as cancer. Our previous study identified in human gastric adenocarcinoma an upregulated transcript GCRG213, which shared 88% homology with human L1 sequence and contained a putative conserved apurinic/apyrimidinic endonucleas1 domain. Immunohistochemistry was carried out by using a monoclonal mouse anti-human GCRG213 protein (GCRG213p) antibody produced in our laboratory, on tissue microarray constructed with specimens from 175 gastric adenocarcinoma patients. The correlation between GCRG213p expression and patient clinicopathological parameters was evaluated. GCRG213p expression in gastric cancer cell lines were studied using Western blotting analysis. L1 promoter methylation status of gastric cancer cells was tested using methylation-specific PCR. BLASTP was used at the NCBI Blast server to identify GCRG213p sequence to any alignments in the Protein Data Bank databases. Most primary gastric cancer, lymph node metastases and gastric intestinal metaplasia glands showed positive GCRG213p immunoreactivity. High GCRG213p immunostaining score in the primary gastric cancer was positively correlated with tumor differentiation (well differentiated, p = 0.001), Lauren’s classification (intestinal type, p < 0.05) and a late age onset of gastric adenocarcinoma (≥65 yrs; p < 0.05). GCRG213p expression has no association with other clinicopathological parameters, including survival. Western blotting analysis of GCRG213p expression in gastric cancer cells indicated that GCRG213p level was higher in gastric cancer cell lines than in human normal gastric epithelium immortalized cell line GES-1. Partial methylation of L1 in gastric cancer cells was confirmed by methylation

Energy Consumption Database

Science.gov (United States)

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

Expression image data of Drosophila GAL4 enhancer trap lines - GETDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us GETDB Expression image data of Drosophila GAL4 enhancer trap lines Data detail Data name Exp...ta contents 3,075 expression image data by developmental stages of Drosophila Images are classified into the...escription Download License Update History of This Database Site Policy | Contact Us Expression image data of Drosophila GAL4 enhancer trap lines - GETDB | LSDB Archive ... ...ression image data of Drosophila GAL4 enhancer trap lines DOI 10.18908/lsdba.nbdc00236-004 Description of da

Comparing UV/EUV line parameters and magnetic field in a quiescent prominence with tornadoes

Science.gov (United States)

Levens, P. J.; Labrosse, N.; Schmieder, B.; López Ariste, A.; Fletcher, L.

2017-10-01

Context. Understanding the relationship between plasma and the magnetic field is important for describing and explaining the observed dynamics of solar prominences. Aims: We determine if a close relationship can be found between plasma and magnetic field parameters, measured at high resolution in a well-observed prominence. Methods: A prominence observed on 15 July 2014 by the Interface Region Imaging Spectrograph (IRIS), Hinode, the Solar Dynamics Observatory (SDO), and the Télescope Héliographique pour l'Étude du Magnétisme et des Instabilités Solaires (THEMIS) is selected. We perform a robust co-alignment of data sets using a 2D cross-correlation technique. Magnetic field parameters are derived from spectropolarimetric measurements of the He I D3 line from THEMIS. Line ratios and line-of-sight velocities from the Mg II h and k lines observed by IRIS are compared with magnetic field strength, inclination, and azimuth. Electron densities are calculated using Fe xii line ratios from the Hinode Extreme-ultraviolet Imaging Spectrometer, which are compared to THEMIS and IRIS data. Results: We find Mg II k/h ratios of around 1.4 everywhere, similar to values found previously in prominences. Also, the magnetic field is strongest ( 30 G) and predominantly horizontal in the tornado-like legs of the prominence. The k3 Doppler shift is found to be between ±10 km s-1 everywhere. Electron densities at a temperature of 1.5 × 106 K are found to be around 109 cm-3. No significant correlations are found between the magnetic field parameters and any of the other plasma parameters inferred from spectroscopy, which may be explained by the large differences in the temperatures of the lines used in this study. Conclusions: This is the first time that a detailed statistical study of plasma and magnetic field parameters has been performed at high spatial resolution in a prominence. Our results provide important constraints on future models of the plasma and magnetic field in

Reducing process delays for real-time earthquake parameter estimation - An application of KD tree to large databases for Earthquake Early Warning

Science.gov (United States)

Yin, Lucy; Andrews, Jennifer; Heaton, Thomas

2018-05-01

Earthquake parameter estimations using nearest neighbor searching among a large database of observations can lead to reliable prediction results. However, in the real-time application of Earthquake Early Warning (EEW) systems, the accurate prediction using a large database is penalized by a significant delay in the processing time. We propose to use a multidimensional binary search tree (KD tree) data structure to organize large seismic databases to reduce the processing time in nearest neighbor search for predictions. We evaluated the performance of KD tree on the Gutenberg Algorithm, a database-searching algorithm for EEW. We constructed an offline test to predict peak ground motions using a database with feature sets of waveform filter-bank characteristics, and compare the results with the observed seismic parameters. We concluded that large database provides more accurate predictions of the ground motion information, such as peak ground acceleration, velocity, and displacement (PGA, PGV, PGD), than source parameters, such as hypocenter distance. Application of the KD tree search to organize the database reduced the average searching process by 85% time cost of the exhaustive method, allowing the method to be feasible for real-time implementation. The algorithm is straightforward and the results will reduce the overall time of warning delivery for EEW.

The HITRAN2016 molecular spectroscopic database

Energy Technology Data Exchange (ETDEWEB)

Gordon, I. E.; Rothman, L. S.; Hill, C.; Kochanov, R. V.; Tan, Y.; Bernath, P. F.; Birk, M.; Boudon, V.; Campargue, A.; Chance, K. V.; Drouin, B. J.; Flaud, J. -M.; Gamache, R. R.; Hodges, J. T.; Jacquemart, D.; Perevalov, V. I.; Perrin, A.; Shine, K. P.; Smith, M. -A. H.; Tennyson, J.; Toon, G. C.; Tran, H.; Tyuterev, V. G.; Barbe, A.; Császár, A. G.; Devi, V. M.; Furtenbacher, T.; Harrison, J. J.; Hartmann, J. -M.; Jolly, A.; Johnson, T. J.; Karman, T.; Kleiner, I.; Kyuberis, A. A.; Loos, J.; Lyulin, O. M.; Massie, S. T.; Mikhailenko, S. N.; Moazzen-Ahmadi, N.; Müller, H. S. P.; Naumenko, O. V.; Nikitin, A. V.; Polyansky, O. L.; Rey, M.; Rotger, M.; Sharpe, S. W.; Sung, K.; Starikova, E.; Tashkun, S. A.; Auwera, J. Vander; Wagner, G.; Wilzewski, J.; Wcisło, P.; Yu, S.; Zak, E. J.

2017-12-01

This paper describes the contents of the 2016 edition of the HITRAN molecular spectroscopic compilation. The new edition replaces the previous HITRAN edition of 2012 and its updates during the intervening years. The HITRAN molecular absorption compilation is comprised of five major components: the traditional line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, infrared absorption cross-sections for molecules not yet amenable to representation in a line-by-line form, collision-induced absorption data, aerosol indices of refraction, and general tables such as partition sums that apply globally to the data. The new HITRAN is greatly extended in terms of accuracy, spectral coverage, additional absorption phenomena, added line-shape formalisms, and validity. Moreover, molecules, isotopologues, and perturbing gases have been added that address the issues of atmospheres beyond the Earth. Of considerable note, experimental IR cross-sections for almost 200 additional significant molecules have been added to the database.

Scaling study of edge plasma parameters using a multi-device database

International Nuclear Information System (INIS)

Tsui, H.Y.W.; Miner, W.H.; Wootton, A.J.

1995-01-01

A database consisting of edge equilibrium, turbulence and transport related plasma parameters has been compiled. Scaling laws for edge density, electron temperature, and radial particle flux are derived in an initial study using a subset of data obtained from tokamaks Phaedrus-T, Tokamak de Varennes, TEXT and TEXT-U. A comparison of edge particle transport in divertor and limiter plasmas shows that the magnetic topology of a separatrix or a divertor improves particle confinement. The particle diffusion coefficient varies radially in a manner opposite to that of Bohm diffusion. ((orig.))

Parameters Investigation of Mathematical Model of Productivity for Automated Line with Availability by DMAIC Methodology

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2014-01-01

Full Text Available Automated line is widely applied in industry especially for mass production with less variety product. Productivity is one of the important criteria in automated line as well as industry which directly present the outputs and profits. Forecast of productivity in industry accurately in order to achieve the customer demand and the forecast result is calculated by using mathematical model. Mathematical model of productivity with availability for automated line has been introduced to express the productivity in terms of single level of reliability for stations and mechanisms. Since this mathematical model of productivity with availability cannot achieve close enough productivity compared to actual one due to lack of parameters consideration, the enhancement of mathematical model is required to consider and add the loss parameters that is not considered in current model. This paper presents the investigation parameters of productivity losses investigated by using DMAIC (Define, Measure, Analyze, Improve, and Control concept and PACE Prioritization Matrix (Priority, Action, Consider, and Eliminate. The investigated parameters are important for further improvement of mathematical model of productivity with availability to develop robust mathematical model of productivity in automated line.

Prediction of the Voltage Quality in an Overhead Transmission Line with Distributed Parameters

OpenAIRE

Bulyga Leonid L.; Tarasov Evgeniy V.; Ushakov Vasily Ya.; Kharlov Nikolay N.

2015-01-01

The present work is devoted to investigation of an electrical transmission line with allowance for distributed parameters. From the results of voltage measurements at terminals of an actual transmission line, effective values of the voltage are calculated for every line section. Special attention is given to higher harmonics and asymmetry. Spectral composition of the voltage is presented and changes in values of harmonic components are analyzed. The effect of higher harmonics on the equipment...

The LXCat project: Electron scattering cross sections and swarm parameters for low temperature plasma modeling

International Nuclear Information System (INIS)

Pancheshnyi, S.; Biagi, S.; Bordage, M.C.; Hagelaar, G.J.M.; Morgan, W.L.; Phelps, A.V.; Pitchford, L.C.

2012-01-01

Graphical abstract: LXCat is an open-access website containing data needed for low temperature plasma modeling as well as on-line tools useful for their manipulation. Highlights: ► LXCat: an open-access website with data for low temperature plasma modeling. ► Contains compilations of electron scattering cross sections and transport data. ► Data from different contributors for many neutral, ground-state species. ► On-line tools for browsing, plotting, up/downloading data. ► On-line Boltzmann solver for calculating electron swarm parameters. - Abstract: LXCat is a dynamic, open-access, website for collecting, displaying, and downloading ELECtron SCATtering cross sections and swarm parameters (mobility, diffusion coefficient, reaction rates, etc.) required for modeling low temperature, non-equilibrium plasmas. Contributors set up individual databases, and the available databases, indicated by the contributor’s chosen title, include mainly complete sets of electron-neutral scattering cross sections, although the option for introducing partial sets of cross sections exists. A database for measured swarm parameters is also part of LXCat, and this is a growing activity. On-line tools include options for browsing, plotting, and downloading cross section data. The electron energy distribution functions (edfs) in low temperature plasmas are in general non-Maxwellian, and LXCat provides an option for execution of an on-line Boltzmann equation solver to calculate the edf in homogeneous electric fields. Thus, the user can obtain electron transport and rate coefficients (averages over the edfs) in pure gases or gas mixtures over a range of values of the reduced electric fields strength, E/N, the ratio of the electric field strength to the neutral density, using cross sections from the available databases. New contributors are welcome and anyone wishing to create a database and upload data can request a username and password. LXCat is part of a larger, community

The Correlation of Smile Line with the Vertical Cephalometric Parameters of Anterior Facial Height

Directory of Open Access Journals (Sweden)

T. Hosseinzadeh–Nik

2005-03-01

Full Text Available Statement of the problem: In the evolution of orthodontics, the changes in soft tissue,especially smile line attracts considerable attention.Purpose: The present study was carried out to evaluate the correlation of the smile line with the vertical parameters of anterior part of face.Materials and Methods: Forty-six Iranian adults, aged between 18-25 years were selected. Five quantitative and three qualitative variables of smile analysis were recorded for each subject. Cephalometric analysis was carried out using angular and linear parameters. The correlations between smile line variables and cephalometric parameters were calculated using Spearman and Pearson’s correlation analyses.Results: The result of this study showed that the cephalometric parameters of N-Me,Pn-Line, N-B, N-Pg had significant correlations with quantitative variable of toothlower lip position. The P-values were P=0.003, P=0.027, P=0.006, P=0.002 respectively. N-Me, N-B, N-Pg represented significant correlations with interlabial gapon smile (P= 0.006, P=0.036, P=0.002 respectively. There was a significant correlation between N-Pg and quantitative factor of tooth-upper lip position (P=0.034. Upper incisor to palatal plane showed a significant correlation with qualitative variable oftooth-upper lip position (P=0.019, interlabial gap on smile (P=0.004, and tooth-upper lip position (P=0.006. Upper incisor to FH represented a reverse relation with incisal edge to lower lip (P=0.028.This parameter also showed significant correlations withquantitative factors of tooth-lower lip position (P=0.040 and crown height (P=0.002.Conclusions: According to the results of this study, it can be concluded that, linear skeletal and dental vertical factors affect the vertical features of smile. Angular vertical parameters, except gonial angle, influence the vertical position of smile.

Opinions on Drug Interaction Sources in Anticancer Treatments and Parameters for an Oncology-Specific Database by Pharmacy Practitioners in Asia

Directory of Open Access Journals (Sweden)

2010-01-01

Full Text Available Cancer patients undergoing chemotherapy are particularly susceptible to drug-drug interactions (DDIs. Practitioners should keep themselves updated with the most current DDI information, particularly involving new anticancer drugs (ACDs. Databases can be useful to obtain up-to-date DDI information in a timely and efficient manner. Our objective was to investigate the DDI information sources of pharmacy practitioners in Asia and their views on the usefulness of an oncology-specific database for ACD interactions. A qualitative, cross-sectional survey was done to collect information on the respondents' practice characteristics, sources of DDI information and parameters useful in an ACD interaction database. Response rate was 49%. Electronic databases (70%, drug interaction textbooks (69% and drug compendia (64% were most commonly used. Majority (93% indicated that a database catering towards ACD interactions was useful. Essential parameters that should be included in the database were the mechanism and severity of the detected interaction, and the presence of a management plan (98% each. This study has improved our understanding on the usefulness of various DDI information sources for ACD interactions among pharmacy practitioners in Asia. An oncology-specific DDI database targeting ACD interactions is definitely attractive for clinical practice.

Prediction of the Voltage Quality in an Overhead Transmission Line with Distributed Parameters

Directory of Open Access Journals (Sweden)

Bulyga Leonid L.

2015-01-01

Full Text Available The present work is devoted to investigation of an electrical transmission line with allowance for distributed parameters. From the results of voltage measurements at terminals of an actual transmission line, effective values of the voltage are calculated for every line section. Special attention is given to higher harmonics and asymmetry. Spectral composition of the voltage is presented and changes in values of harmonic components are analyzed. The effect of higher harmonics on the equipment operation is analyzed.

Line-feature-based calibration method of structured light plane parameters for robot hand-eye system

Science.gov (United States)

Qi, Yuhan; Jing, Fengshui; Tan, Min

2013-03-01

For monocular-structured light vision measurement, it is essential to calibrate the structured light plane parameters in addition to the camera intrinsic parameters. A line-feature-based calibration method of structured light plane parameters for a robot hand-eye system is proposed. Structured light stripes are selected as calibrating primitive elements, and the robot moves from one calibrating position to another with constraint in order that two misaligned stripe lines are generated. The images of stripe lines could then be captured by the camera fixed at the robot's end link. During calibration, the equations of two stripe lines in the camera coordinate system are calculated, and then the structured light plane could be determined. As the robot's motion may affect the effectiveness of calibration, so the robot's motion constraints are analyzed. A calibration experiment and two vision measurement experiments are implemented, and the results reveal that the calibration accuracy can meet the precision requirement of robot thick plate welding. Finally, analysis and discussion are provided to illustrate that the method has a high efficiency fit for industrial in-situ calibration.

Personal Publications Lists Serve as a Reliable Calibration Parameter to Compare Coverage in Academic Citation Databases with Scientific Social Media

Directory of Open Access Journals (Sweden)

Emma Hughes

2017-03-01

Full Text Available A Review of: Hilbert, F., Barth, J., Gremm, J., Gros, D., Haiter, J., Henkel, M., Reinhardt, W., & Stock, W.G. (2015. Coverage of academic citation databases compared with coverage of scientific social media: personal publication lists as calibration parameters. Online Information Review 39(2: 255-264. http://dx.doi.org/10.1108/OIR-07-2014-0159 Objective – The purpose of this study was to explore coverage rates of information science publications in academic citation databases and scientific social media using a new method of personal publication lists as a calibration parameter. The research questions were: How many publications are covered in different databases, which has the best coverage, and what institutions are represented and how does the language of the publication play a role? Design – Bibliometric analysis. Setting – Academic citation databases (Web of Science, Scopus, Google Scholar and scientific social media (Mendeley, CiteULike, Bibsonomy. Subjects – 1,017 library and information science publications produced by 76 information scientists at 5 German-speaking universities in Germany and Austria. Methods – Only documents which were published between 1 January 2003 and 31 December 2012 were included. In that time the 76 information scientists had produced 1,017 documents. The information scientists confirmed that their publication lists were complete and these served as the calibration parameter for the study. The citations from the publication lists were searched in three academic databases: Google Scholar, Web of Science (WoS, and Scopus; as well as three social media citation sites: Mendeley, CiteULike, and BibSonomy and the results were compared. The publications were searched for by author name and words from the title. Main results – None of the databases investigated had 100% coverage. In the academic databases, Google Scholar had the highest amount of coverage with an average of 63%, Scopus an average of 31%, and

Characterization of appendage weld quality by on line monitoring of electrical parameters

Energy Technology Data Exchange (ETDEWEB)

Setty, D.S.; Somani, A.K.; Ram, A.M.; Rao, A.R.; Jayaraj, R.N.; Kalidas, R. [Nuclear Fuel Complex, Dept. of Atomic Energy, Hyderabad (India)

2005-07-01

Resistance projection welding of zirconium alloy appendages is one of the most critical processes in the PHWR fuel fabrication. Appendages like Spacers and Bearing pads having multi projections are joined to the fuel sheath using capacitor discharge power source. Variations in the projection sizes, weld parameters and cleanliness of the work pieces have significant effect on the weld quality, in addition to material properties like hardness, tensile strength and surface finish. Defects like metal expulsion and weak welds are occasionally observed in appendage welding process, which need to be identified and segregated. Though numerous off-line inspection methods are available for the weld quality evaluation, on-line monitoring of weld quality is essential for identifying defective welds. For this purpose, various monitoring techniques like acoustic emission, analyzing derived electrical parameters and weld upset/deformation measurements are employed. The derived electrical parameters like A{sup 2}-Sec and Ohm-Sec can also be monitored. The present paper highlights development of suitable acceptance criteria for the monitoring technique by employing derived electrical parameters covering a wide range of weld variables like watt-sec and squeeze force. Excellent correlation could be achieved in identifying the weak welds and weld expulsion defects in mass production. (author)

Technical-parameter calculation model for underground low-power electrical lines and indoor installations used in telecommunications

Directory of Open Access Journals (Sweden)

Henry Bastidas Mora

2011-09-01

Full Text Available This article presents an analysis of electrical distribution theory for 60Hz-lines operating at low voltage, particularly underground lines and residential indoor installations. Such distribution lines’ behaviour is observed as a function of frequency to consider any advantages regarding the potential use of power transmission lines (PTL for transmitting telecommunication signals. A method for computing the secondary parameters is proposed which has been based on the primary parameters, namely inductance, capacitance, conductance and resistance. The secondary parameters so obtained were characteristic impedance, propagation constant (together with its real value and the attenuation constant. Conductor configurations, insulation materials and gauges commonly used in Colombia were verified for such low-voltage lines. A mathematical model is proposed as a theoretical tool for analysing and predicting characteristic impedance pattern and the attenuations which occur at high frequencies, thereby complementing our group’s previous work. Conclusions are drawn, together with a perspective regarding future work and applications.

Database for radiation therapy images

International Nuclear Information System (INIS)

Shalev, S.; Cosby, S.; Leszczynski, K.; Chu, T.

1989-01-01

The authors have developed a database for images acquired during simulation and verification of radiation treatments. Simulation images originate as planning films that are digitized with a video camera, or through direct digitization of fluoroscopic images. Verification images may also be digitized from portal films or acquired with an on-line portal imaging system. Images are classified by the patient, the fraction, the field direction, static or dynamic (movie) sequences, and the type of processing applied. Additional parameters indicate whether the source is a simulation or treatment, whether images are digitized film or real-time acquisitions, and whether treatment is portal or double exposure for beam localization. Examples are presented for images acquired, processed, stored, and displayed with on-line portal imaging system (OPIUM) and digital simulation system (FLIP)

Influence of process parameters on the weld lines of a micro injection molded component

DEFF Research Database (Denmark)

Tosello, Guido; Gava, Alberto; Hansen, Hans Nørgaard

2007-01-01

The insufficient entanglement of the molecular chains and the stress amplification at the v-notch of a weld line compromise the mechanical strength of a plastic product, also in the micro scale. To investigate the influence of process parameters on the weld lines formation, a special micro cavity...... was designed and manufactured by µEDM (Electro Discharge Machining). Weld lines were quantitatively characterized both in the two-dimensional (direction and position) and three-dimensional range (surface topography characterization). Results showed that shape and position of weld lines are mainly influenced...

An Empirical Spectroscopic Database for Acetylene in the Regions of 5850-9415 CM^{-1}

Science.gov (United States)

Campargue, Alain; Lyulin, Oleg

2017-06-01

Six studies have been recently devoted to a systematic analysis of the high-resolution near infrared absorption spectrum of acetylene recorded by Cavity Ring Down spectroscopy (CRDS) in Grenoble and by Fourier-transform spectroscopy (FTS) in Brussels and Hefei. On the basis of these works, in the present contribution, we construct an empirical database for acetylene in the 5850 - 9415 \\wn region excluding the 6341-7000 \\wn interval corresponding to the very strong νb{1}+ νb{3} manifold. The database gathers and extends information included in our CRDS and FTS studies. In particular, the intensities of about 1700 lines measured by CRDS in the 7244-7920 \\wn are reported for the first time together with those of several bands of ^{12}C^{13}CH_{2} present in natural isotopic abundance in the acetylene sample. The Herman-Wallis coefficients of most of the bands are derived from a fit of the measured intensity values. A recommended line list is provided with positions calculated using empirical spectroscopic parameters of the lower and upper energy vibrational levels and intensities calculated using the derived Herman-Wallis coefficients. This approach allows completing the experimental list by adding missing lines and improving poorly determined positions and intensities. As a result the constructed line list includes a total of 10973 lines belonging to 146 bands of ^{12}C_{2}H_{2} and 29 bands of ^{12}C^{13}CH_{2}. For comparison the HITRAN2012 database in the same region includes 869 lines of 14 bands, all belonging to ^{12}C_{2}H_{2}. Our weakest lines have an intensity on the order of 10^{-29} cm/molecule,about three orders of magnitude smaller than the HITRAN intensity cut off. Line profile parameters are added to the line list which is provided in HITRAN format. The comparison to the HITRAN2012 line list or to results obtained using the global effective operator approach is discussed in terms of completeness and accuracy.

Common hyperspectral image database design

Science.gov (United States)

Tian, Lixun; Liao, Ningfang; Chai, Ali

2009-11-01

This paper is to introduce Common hyperspectral image database with a demand-oriented Database design method (CHIDB), which comprehensively set ground-based spectra, standardized hyperspectral cube, spectral analysis together to meet some applications. The paper presents an integrated approach to retrieving spectral and spatial patterns from remotely sensed imagery using state-of-the-art data mining and advanced database technologies, some data mining ideas and functions were associated into CHIDB to make it more suitable to serve in agriculture, geological and environmental areas. A broad range of data from multiple regions of the electromagnetic spectrum is supported, including ultraviolet, visible, near-infrared, thermal infrared, and fluorescence. CHIDB is based on dotnet framework and designed by MVC architecture including five main functional modules: Data importer/exporter, Image/spectrum Viewer, Data Processor, Parameter Extractor, and On-line Analyzer. The original data were all stored in SQL server2008 for efficient search, query and update, and some advance Spectral image data Processing technology are used such as Parallel processing in C#; Finally an application case is presented in agricultural disease detecting area.

Photogrammetric Resection Approach Using Straight Line Features for Estimation of Cartosat-1 Platform Parameters

Directory of Open Access Journals (Sweden)

Nita H. Shah

2008-08-01

Full Text Available The classical calibration or space resection is the fundamental task in photogrammetry. The lack of sufficient knowledge of interior and exterior orientation parameters lead to unreliable results in the photogrammetric process. There are several other available methods using lines, which consider the determination of exterior orientation parameters, with no mention to the simultaneous determination of inner orientation parameters. Normal space resection methods solve the problem using control points, whose coordinates are known both in image and object reference systems. The non-linearity of the model and the problems, in point location in digital images are the main drawbacks of the classical approaches. The line based approach to overcome these problems includes usage of lines in the number of observations that can be provided, which improve significantly the overall system redundancy. This paper addresses mathematical model relating to both image and object reference system for solving the space resection problem which is generally used for upgrading the exterior orientation parameters. In order to solve the dynamic camera calibration parameters, a sequential estimator (Kalman Filtering is applied; in an iterative process to the image. For dynamic case, e.g. an image sequence of moving objects, a state prediction and a covariance matrix for the next instant is obtained using the available estimates and the system model. Filtered state estimates can be computed from these predicted estimates using the Kalman Filtering approach and basic physical sensor model for each instant of time. The proposed approach is tested with three real data sets and the result suggests that highly accurate space resection parameters can be obtained with or without using the control points and progressive processing time reduction.

X-ray Photoelectron Spectroscopy Database (Version 4.1)

Science.gov (United States)

SRD 20 X-ray Photoelectron Spectroscopy Database (Version 4.1) (Web, free access)   The NIST XPS Database gives access to energies of many photoelectron and Auger-electron spectral lines. The database contains over 22,000 line positions, chemical shifts, doublet splittings, and energy separations of photoelectron and Auger-electron lines.

Architecture of Automated Database Tuning Using SGA Parameters

Directory of Open Access Journals (Sweden)

Hitesh KUMAR SHARMA

2012-05-01

Full Text Available Business Data always growth from kilo byte, mega byte, giga byte, tera byte, peta byte, and so far. There is no way to avoid this increasing rate of data till business still running. Because of this issue, database tuning be critical part of a information system. Tuning a database in a cost-effective manner is a growing challenge. The total cost of ownership (TCO of information technology needs to be significantly reduced by minimizing people costs. In fact, mistakes in operations and administration of information systems are the single most reasons for system outage and unacceptable performance [3]. One way of addressing the challenge of total cost of ownership is by making information systems more self-managing. A particularly difficult piece of the ambitious vision of making database systems self-managing is the automation of database performance tuning. In this paper, we will explain the progress made thus far on this important problem. Specifically, we will propose the architecture and Algorithm for this problem.

Multi-parameter vital sign database to assist in alarm optimization for general care units.

Science.gov (United States)

Welch, James; Kanter, Benjamin; Skora, Brooke; McCombie, Scott; Henry, Isaac; McCombie, Devin; Kennedy, Rosemary; Soller, Babs

2016-12-01

Continual vital sign assessment on the general care, medical-surgical floor is expected to provide early indication of patient deterioration and increase the effectiveness of rapid response teams. However, there is concern that continual, multi-parameter vital sign monitoring will produce alarm fatigue. The objective of this study was the development of a methodology to help care teams optimize alarm settings. An on-body wireless monitoring system was used to continually assess heart rate, respiratory rate, SpO 2 and noninvasive blood pressure in the general ward of ten hospitals between April 1, 2014 and January 19, 2015. These data, 94,575 h for 3430 patients are contained in a large database, accessible with cloud computing tools. Simulation scenarios assessed the total alarm rate as a function of threshold and annunciation delay (s). The total alarm rate of ten alarms/patient/day predicted from the cloud-hosted database was the same as the total alarm rate for a 10 day evaluation (1550 h for 36 patients) in an independent hospital. Plots of vital sign distributions in the cloud-hosted database were similar to other large databases published by different authors. The cloud-hosted database can be used to run simulations for various alarm thresholds and annunciation delays to predict the total alarm burden experienced by nursing staff. This methodology might, in the future, be used to help reduce alarm fatigue without sacrificing the ability to continually monitor all vital signs.

Effects of Velocity Parameters of the Wind on the Line Formation for 32 CYG

Directory of Open Access Journals (Sweden)

Kyung-Mee Kim

1999-12-01

Full Text Available We calculate the theoretical line profiles in order to investigate the influence of various velocity parameters. Line profiles are calculated by using the exponential velocoty law with two acceleration regions for orbital phases 0.70 and 0.06. From this compttation we find that the influence of the wind velocity gradient on a giant star is more important in the region near the star than in the region away from the star. The observed lines show stronger emission than the calculated line profiles and we interpret the difference is caused by the inhomogeniety in the atmosphere of 32 Cyg.

Open Geoscience Database

Science.gov (United States)

Bashev, A.

2012-04-01

Currently there is an enormous amount of various geoscience databases. Unfortunately the only users of the majority of the databases are their elaborators. There are several reasons for that: incompaitability, specificity of tasks and objects and so on. However the main obstacles for wide usage of geoscience databases are complexity for elaborators and complication for users. The complexity of architecture leads to high costs that block the public access. The complication prevents users from understanding when and how to use the database. Only databases, associated with GoogleMaps don't have these drawbacks, but they could be hardly named "geoscience" Nevertheless, open and simple geoscience database is necessary at least for educational purposes (see our abstract for ESSI20/EOS12). We developed a database and web interface to work with them and now it is accessible at maps.sch192.ru. In this database a result is a value of a parameter (no matter which) in a station with a certain position, associated with metadata: the date when the result was obtained; the type of a station (lake, soil etc); the contributor that sent the result. Each contributor has its own profile, that allows to estimate the reliability of the data. The results can be represented on GoogleMaps space image as a point in a certain position, coloured according to the value of the parameter. There are default colour scales and each registered user can create the own scale. The results can be also extracted in *.csv file. For both types of representation one could select the data by date, object type, parameter type, area and contributor. The data are uploaded in *.csv format: Name of the station; Lattitude(dd.dddddd); Longitude(ddd.dddddd); Station type; Parameter type; Parameter value; Date(yyyy-mm-dd). The contributor is recognised while entering. This is the minimal set of features that is required to connect a value of a parameter with a position and see the results. All the complicated data

Epigenomic diversity of colorectal cancer indicated by LINE-1 methylation in a database of 869 tumors

Directory of Open Access Journals (Sweden)

Schernhammer Eva S

2010-05-01

Full Text Available Abstract Background Genome-wide DNA hypomethylation plays a role in genomic instability and carcinogenesis. LINE-1 (L1 retrotransposon constitutes a substantial portion of the human genome, and LINE-1 methylation correlates with global DNA methylation status. LINE-1 hypomethylation in colon cancer has been strongly associated with poor prognosis. However, whether LINE-1 hypomethylators constitute a distinct cancer subtype remains uncertain. Recent evidence for concordant LINE-1 hypomethylation within synchronous colorectal cancer pairs suggests the presence of a non-stochastic mechanism influencing tumor LINE-1 methylation level. Thus, it is of particular interest to examine whether its wide variation can be attributed to clinical, pathologic or molecular features. Design Utilizing a database of 869 colorectal cancers in two prospective cohort studies, we constructed multivariate linear and logistic regression models for LINE-1 methylation (quantified by Pyrosequencing. Variables included age, sex, body mass index, family history of colorectal cancer, smoking status, tumor location, stage, grade, mucinous component, signet ring cells, tumor infiltrating lymphocytes, CpG island methylator phenotype (CIMP, microsatellite instability, expression of TP53 (p53, CDKN1A (p21, CTNNB1 (β-catenin, PTGS2 (cyclooxygenase-2, and FASN, and mutations in KRAS, BRAF, and PIK3CA. Results Tumoral LINE-1 methylation ranged from 23.1 to 90.3 of 0-100 scale (mean 61.4; median 62.3; standard deviation 9.6, and distributed approximately normally except for extreme hypomethylators [LINE-1 methylation Conclusions LINE-1 extreme hypomethylators appear to constitute a previously-unrecognized, distinct subtype of colorectal cancers, which needs to be confirmed by additional studies. Our tumor LINE-1 methylation data indicate enormous epigenomic diversity of individual colorectal cancers.

First line shape analysis and spectroscopic parameters for the ν11 band of 12C2H4

KAUST Repository

Es-sebbar, Et-touhami

2016-08-11

An accurate knowledge of line intensities, collisional broadening coefficients and narrowing parameters is necessary for the interpretation of high-resolution infrared spectra of the Earth and other planetary atmospheres. One of the most promising spectral domains for (C2H4)-C-12 monitoring in such environments is located near the 336 gm window, through its v(11) C-H stretching mode. In this paper, we report an extensive study in which we precisely determine spectroscopic parameters of (C2H4)-C-12 v(11) band at 297 +/- 1 K, using a narrow Difference-Frequency-Generation (DFG) laser with 10(-4) cm(-1) resolution. Absorption measurements were performed in the 2975-2980 cm(-1) spectral window to investigate 32 lines corresponding to where, J\\'ka\\',kc\\'<- Jka,kc, 5 <= J <= 7; 0.5 <= K-a <= 6 and 1 <= K-c <= 14. Spectroscopic parameters are retrieved using either Voigt or appropriate Galatry profile to simulate the measured (C2H4)-C-12 line shape. Line intensities along with self-broadening coefficients are reported for all lines. Narrowing coefficients for each isolated line are also derived. To our knowledge, the current study reports the first extensive spectroscopic parameter measurements of the (C2H4)-C-12 v(11) band in the 2975-2980 cm(-1) range. (C) 2016 Elsevier Ltd. All rights reserved.

First line shape analysis and spectroscopic parameters for the ν11 band of 12C2H4

KAUST Repository

Es-sebbar, Et-touhami; Mantzaras, John; Benilan, Yves; Farooq, Aamir

2016-01-01

An accurate knowledge of line intensities, collisional broadening coefficients and narrowing parameters is necessary for the interpretation of high-resolution infrared spectra of the Earth and other planetary atmospheres. One of the most promising spectral domains for (C2H4)-C-12 monitoring in such environments is located near the 336 gm window, through its v(11) C-H stretching mode. In this paper, we report an extensive study in which we precisely determine spectroscopic parameters of (C2H4)-C-12 v(11) band at 297 +/- 1 K, using a narrow Difference-Frequency-Generation (DFG) laser with 10(-4) cm(-1) resolution. Absorption measurements were performed in the 2975-2980 cm(-1) spectral window to investigate 32 lines corresponding to where, J'ka',kc'<- Jka,kc, 5 <= J <= 7; 0.5 <= K-a <= 6 and 1 <= K-c <= 14. Spectroscopic parameters are retrieved using either Voigt or appropriate Galatry profile to simulate the measured (C2H4)-C-12 line shape. Line intensities along with self-broadening coefficients are reported for all lines. Narrowing coefficients for each isolated line are also derived. To our knowledge, the current study reports the first extensive spectroscopic parameter measurements of the (C2H4)-C-12 v(11) band in the 2975-2980 cm(-1) range. (C) 2016 Elsevier Ltd. All rights reserved.

Note: Characteristic beam parameter for the line electron gun

Science.gov (United States)

Iqbal, M.; Islam, G. U.; Zhou, Z.; Chi, Y.

2013-11-01

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm2 at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm2), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

Note: Characteristic beam parameter for the line electron gun

International Nuclear Information System (INIS)

Iqbal, M.; Islam, G. U.; Zhou, Z.; Chi, Y.

2013-01-01

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm 2 at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm 2 ), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful

Note: Characteristic beam parameter for the line electron gun.

Science.gov (United States)

Iqbal, M; Islam, G U; Zhou, Z; Chi, Y

2013-11-01

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm(2) at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm(2)), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

Trading Time with Space - Development of subduction zone parameter database for a maximum magnitude correlation assessment

Science.gov (United States)

Schaefer, Andreas; Wenzel, Friedemann

2017-04-01

Subduction zones are generally the sources of the earthquakes with the highest magnitudes. Not only in Japan or Chile, but also in Pakistan, the Solomon Islands or for the Lesser Antilles, subduction zones pose a significant hazard for the people. To understand the behavior of subduction zones, especially to identify their capabilities to produce maximum magnitude earthquakes, various physical models have been developed leading to a large number of various datasets, e.g. from geodesy, geomagnetics, structural geology, etc. There have been various studies to utilize this data for the compilation of a subduction zone parameters database, but mostly concentrating on only the major zones. Here, we compile the largest dataset of subduction zone parameters both in parameter diversity but also in the number of considered subduction zones. In total, more than 70 individual sources have been assessed and the aforementioned parametric data have been combined with seismological data and many more sources have been compiled leading to more than 60 individual parameters. Not all parameters have been resolved for each zone, since the data completeness depends on the data availability and quality for each source. In addition, the 3D down-dip geometry of a majority of the subduction zones has been resolved using historical earthquake hypocenter data and centroid moment tensors where available and additionally compared and verified with results from previous studies. With such a database, a statistical study has been undertaken to identify not only correlations between those parameters to estimate a parametric driven way to identify potentials for maximum possible magnitudes, but also to identify similarities between the sources themselves. This identification of similarities leads to a classification system for subduction zones. Here, it could be expected if two sources share enough common characteristics, other characteristics of interest may be similar as well. This concept

Chicken lines divergently selected for antibody responses to sheep red blood cells show line-specific differences in sensitivity to immunomodulation by diet. Part I: Humoral parameters.

Science.gov (United States)

Adriaansen-Tennekes, R; de Vries Reilingh, G; Nieuwland, M G B; Parmentier, H K; Savelkoul, H F J

2009-09-01

Individual differences in nutrient sensitivity have been suggested to be related with differences in stress sensitivity. Here we used layer hens divergently selected for high and low specific antibody responses to SRBC (i.e., low line hens and high line hens), reflecting a genetically based differential immune competence. The parental line of these hens was randomly bred as the control line and was used as well. Recently, we showed that these selection lines differ in their stress reactivity; the low line birds show a higher hypothalamic-pituitary-adrenal (HPA) axis reactivity. To examine maternal effects and neonatal nutritional exposure on nutrient sensitivity, we studied 2 subsequent generations. This also created the opportunity to examine egg production in these birds. The 3 lines were fed 2 different nutritionally complete layer feeds for a period of 22 wk in the first generation. The second generation was fed from hatch with the experimental diets. At several time intervals, parameters reflecting humoral immunity were determined such as specific antibody to Newcastle disease and infectious bursal disease vaccines; levels of natural antibodies binding lipopolysaccharide, lipoteichoic acid, and keyhole limpet hemocyanin; and classical and alternative complement activity. The most pronounced dietary-induced effects were found in the low line birds of the first generation: specific antibody titers to Newcastle disease vaccine were significantly elevated by 1 of the 2 diets. In the second generation, significant differences were found in lipoteichoic acid natural antibodies of the control and low line hens. At the end of the observation period of egg parameters, a significant difference in egg weight was found in birds of the high line. Our results suggest that nutritional differences have immunomodulatory effects on innate and adaptive humoral immune parameters in birds with high HPA axis reactivity and affect egg production in birds with low HPA axis reactivity.

[1012.5676] The Exoplanet Orbit Database

Science.gov (United States)

: The Exoplanet Orbit Database Authors: Jason T Wright, Onsi Fakhouri, Geoffrey W. Marcy, Eunkyu Han present a database of well determined orbital parameters of exoplanets. This database comprises parameters, and the method used for the planets discovery. This Exoplanet Orbit Database includes all planets

Study of Parameters that Determine Railway Line Capacity

Directory of Open Access Journals (Sweden)

Josip Kukec

2005-07-01

Full Text Available In this work the study focuses on:- determining the elements required to determine the locationfor the installation of the main signals,- calculated block lengths, and- calculations of optimal head ways, that have not been studiedin detail although they deserve special attention due totheir impact.Generally speaking, the signals are installed in compliancewith the local circumstances, i. e. according to the technicaland technological characteristics and conditions determinedby the traffic places of work they protect.The distribution and length of the blocks depend on: therailway line and its exploitation characteristics, structure andtype of trains that run on the railway line, traffic organisationand signalisation system, as well as technical and exploitationcharacte1istics of the traction vehicles and the rolling stock.What has to be considered is that the minimum section lengthcannot be shorter than the length of the braking distance, i. e.the length of the longest train which runs on the respective railwayline.The study of these parameters is supplemented by the calculationof the reduction in throughput capacity depending on thelack of uniformity in the operation of trains, which, in order tomaintain the design quality of the transportation se1vice, and inthe activities of establishing and implementing the business policyshouldn't be left out nor bypassed.

Adaptive control based on an on-line parameter estimation of an upper limb exoskeleton.

Science.gov (United States)

Riani, Akram; Madani, Tarek; Hadri, Abdelhafid El; Benallegue, Abdelaziz

2017-07-01

This paper presents an adaptive control strategy for an upper-limb exoskeleton based on an on-line dynamic parameter estimator. The objective is to improve the control performance of this system that plays a critical role in assisting patients for shoulder, elbow and wrist joint movements. In general, the dynamic parameters of the human limb are unknown and differ from a person to another, which degrade the performances of the exoskeleton-human control system. For this reason, the proposed control scheme contains a supplementary loop based on a new efficient on-line estimator of the dynamic parameters. Indeed, the latter is acting upon the parameter adaptation of the controller to ensure the performances of the system in the presence of parameter uncertainties and perturbations. The exoskeleton used in this work is presented and a physical model of the exoskeleton interacting with a 7 Degree of Freedom (DoF) upper limb model is generated using the SimMechanics library of MatLab/Simulink. To illustrate the effectiveness of the proposed approach, an example of passive rehabilitation movements is performed using multi-body dynamic simulation. The aims is to maneuver the exoskeleton that drive the upper limb to track desired trajectories in the case of the passive arm movements.

Automated Oracle database testing

CERN Multimedia

CERN. Geneva

2014-01-01

Ensuring database stability and steady performance in the modern world of agile computing is a major challenge. Various changes happening at any level of the computing infrastructure: OS parameters & packages, kernel versions, database parameters & patches, or even schema changes, all can potentially harm production services. This presentation shows how an automatic and regular testing of Oracle databases can be achieved in such agile environment.

Correlation between the parameters of radiosensitivity in human cancer cell lines

International Nuclear Information System (INIS)

Park, Woo Yoon; Kim, Won Dong; Min, Kyung Soo

1998-01-01

We conducted clonogenic assay using human cancer cell lines (MKN-45, PC-14, Y-79, HeLa) to investigate a correlation between the parameters of radiosensitivity. Human cancer cell lines were irradiated with single doses of 1, 2, 3, 5, 7 and 10Gy for the study of radiosensitivity and sublethal damage repair capacity was assessed with two fractions of 5Gy separated with a time interval of 0, 1, 2, 3, 4, 6 and 24 hours. Surviving fraction was assessed with clonogenic assay using Sperman-Karber method and mathematical analysis of survival curves was done with linear-quadratic (LQ), multitarget-single hit(MS) model and mean inactivation dose(D). Surviving fractions at 2Gy(SF2) were variable among the cell lines, ranged from 0.174 to 0.85. The SF2 of Y-79 was lowest and that of PC-14 was highest(p<0.05, t-test). LQ model analysis showed that the values of α for Y-79, MKN-45, HeLa and PC-14 were 0.603, 0.356, 0.275 and 0.102 respectively, and those of β were 0.005, 0.016, 0.025 and 0.027 respectively. Fitting to MS model showed that the values of Do for Y-79, MKN-45, HeLa and PC-14 were 1.59, 1.84, 1.88 and 2.52 respectively, and those of n were 0.97, 1.46, 1.52 and 1.69 respectively. The Ds calculated by Gauss-Laguerre method were 1.62, 2.37, 2.61 and 3.95 respectively. So the SF2 was significantly correlated with α, Do and D. Their Pearson correlation coefficiencics were -0.953 and 0.993, 0.999 respectively(p<0.05). Sublethal damage repair was saturated around 4 hours and recovery ratios (RR) at plateau phase ranged from 2 to 3.79. But RR was not correlated with SF2, α, β, Do, D. The intrinsic radiosensitivity was very different among the tested human cell lines. Y-79 was the most sensitive and PC-14 was the least sensitive. SF2 was well correlated with α, Do, and D. RR was high for MKN-45 and HeLa but had nothing to do with radiosensitivity parameters. These basic parameters can be used as baseline data for various in vitro radiobiological experiments

Errors in Length-weight Parameters at FishBase.org

OpenAIRE

Michael Courtney; Simeon Cole-Fletcher; Lucas Marin-Salcedo; Ajaya Rana

2011-01-01

Background: FishBase.org is an on-line database of fish related data that has been cited over 1500 times in the fisheries literature. Length-weight relationships in fish traditionally employ the model, W(L) = aL^b^, where L is length and W is weight. Parameters a and b are catalogued by FishBase for a large number of sources and species. FishBase.org detects outliers in a plot of log(a) vs. b to identify dubious length-weight parameters.

Parameter investigation with line-implicit lower-upper symmetric Gauss-Seidel on 3D stretched grids

Science.gov (United States)

Otero, Evelyn; Eliasson, Peter

2015-03-01

An implicit lower-upper symmetric Gauss-Seidel (LU-SGS) solver has been implemented as a multigrid smoother combined with a line-implicit method as an acceleration technique for Reynolds-averaged Navier-Stokes (RANS) simulation on stretched meshes. The computational fluid dynamics code concerned is Edge, an edge-based finite volume Navier-Stokes flow solver for structured and unstructured grids. The paper focuses on the investigation of the parameters related to our novel line-implicit LU-SGS solver for convergence acceleration on 3D RANS meshes. The LU-SGS parameters are defined as the Courant-Friedrichs-Lewy number, the left-hand side dissipation, and the convergence of iterative solution of the linear problem arising from the linearisation of the implicit scheme. The influence of these parameters on the overall convergence is presented and default values are defined for maximum convergence acceleration. The optimised settings are applied to 3D RANS computations for comparison with explicit and line-implicit Runge-Kutta smoothing. For most of the cases, a computing time acceleration of the order of 2 is found depending on the mesh type, namely the boundary layer and the magnitude of residual reduction.

Experimental Line List of Water Vapor Absorption Lines in the Spectral Ranges 1850 - 2280 CM-1 and 2390-4000 CM-1

Science.gov (United States)

Loos, Joep; Birk, Manfred; Wagner, Georg

2017-06-01

A new experimental line parameter list of water vapor absorption lines in the spectral ranges 1850 - 2280 cm-1 and 2390 - 4000 cm-1 is presented. The line list is based on the analysis of several transmittance spectra measured using a Bruker IFS 125 HR high resolution Fourier transform spectrometer. A total of 54 measurements of pure water and water/air-mixtures at 296 K as well as water/air-mixtures at high and low temperatures were performed. A multispectrum fitting approach was used applying a quadratic speed-dependent hard collision line shape model in the Hartmann-Tran implementation extended to account for line mixing in the Rosenkranz approximation in order to retrieve line positions, intensities, self- and air-broadening parameters, their speed-dependence, self- and air-shifts as well as line mixing and in some cases collisional narrowing parameters. Additionally, temperature dependence parameters for widths, shifts and in a few cases line mixing were retrieved. For every parameter an extensive error estimation calculation was performed identifying and specifying systematic error sources. The resulting parameters are compared to the databases HITRAN12 as well as experimental values. For intensities, a detailed comparison to results of recent ab initio calculations performed at University College London was done showing an agreement within 2 % for a majority of the data. However, for some bands there are systematic deviations attributed to ab initio calculation errors. .H. Ngo et al. JQSRT 129, 89-100 (2013) doi:10.1016/j.jqsrt.2013.05.034; JQSRT 134, 105 (2014) doi:10.1016/j.jqsrt.2013.10.016. H. Tran et al. JQSRT 129, 199-203 (2013) doi:10.1016/j.jqsrt.2013.06.015; JQSRT 134, 104 (2014) doi:10.1016/j.jqsrt.2013.10.015. L.S. Rothman et al. JQSRT 130, 4-50 (2013) doi:10.1016/j.jqsrt.2013.07.002. N. Jacquinet-Husson et al. JMS 112, 2395-2445 (2016) doi:10.1016/j.jms.2016.06.007.

An empirical spectroscopic database for acetylene in the regions of 5850-6341 cm-1 and 7000-9415 cm-1

Science.gov (United States)

Lyulin, O. M.; Campargue, A.

2017-12-01

Six studies have been recently devoted to a systematic analysis of the high-resolution near infrared absorption spectrum of acetylene recorded by Cavity Ring Down spectroscopy (CRDS) in Grenoble and by Fourier-transform spectroscopy (FTS) in Brussels and Hefei. On the basis of these works, in the present contribution, we construct an empirical database for acetylene in the 5850-9415 cm-1 region excluding the 6341-7000 cm-1 interval corresponding to the very strong ν1+ν3 manifold. Our database gathers and extends information included in our CRDS and FTS studies. In particular, the intensities of about 1700 lines measured by CRDS in the 7244-7920 cm-1 region are reported for the first time together with those of several bands of 12C13CH2 present in natural isotopic abundance in the acetylene sample. The Herman-Wallis coefficients of most of the bands are derived from a fit of the measured intensity values. A recommended line list is provided with positions calculated using empirical spectroscopic parameters of the lower and upper energy vibrational levels and intensities calculated using the derived Herman-Wallis coefficients. This approach allows completing the experimental list by adding missing lines and improving poorly determined positions and intensities. As a result the constructed line list includes a total of 11113 transitions belonging to 150 bands of 12C2H2 and 29 bands of 12C13CH2. For comparison the HITRAN database in the same region includes 869 transitions of 14 bands, all belonging to 12C2H2. Our weakest lines have an intensity on the order of 10-29 cm/molecule, about three orders of magnitude smaller than the HITRAN intensity cut off. Line profile parameters are added to the line list which is provided in HITRAN format. The comparison of the acetylene database to the HITRAN2012 line list or to results obtained using the global effective operator approach is discussed in terms of completeness and accuracy.

Note: Characteristic beam parameter for the line electron gun

Energy Technology Data Exchange (ETDEWEB)

Iqbal, M. [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Islam, G. U. [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Zhou, Z.; Chi, Y. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

2013-11-15

We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm{sup 2} at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm{sup 2}), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

On-line parameter, state-of-charge and aging estimation of Li-ion batteries

NARCIS (Netherlands)

Rosca, B.; Kessels, J.T.B.A.; Bergveld, H.J.; Bosch, P.P.J. van den

2012-01-01

This paper presents an on-line model identification method for Li-ion battery parameters that combines high accuracy and low computational complexity. Experimental results show that modeling errors are smaller than 1% throughout the feasible operating range. The identified model is used in a state

A new relational database structure and online interface for the HITRAN database

International Nuclear Information System (INIS)

Hill, Christian; Gordon, Iouli E.; Rothman, Laurence S.; Tennyson, Jonathan

2013-01-01

A new format for the HITRAN database is proposed. By storing the line-transition data in a number of linked tables described by a relational database schema, it is possible to overcome the limitations of the existing format, which have become increasingly apparent over the last few years as new and more varied data are being used by radiative-transfer models. Although the database in the new format can be searched using the well-established Structured Query Language (SQL), a web service, HITRANonline, has been deployed to allow users to make most common queries of the database using a graphical user interface in a web page. The advantages of the relational form of the database to ensuring data integrity and consistency are explored, and the compatibility of the online interface with the emerging standards of the Virtual Atomic and Molecular Data Centre (VAMDC) project is discussed. In particular, the ability to access HITRAN data using a standard query language from other websites, command line tools and from within computer programs is described. -- Highlights: • A new, interactive version of the HITRAN database is presented. • The data is stored in a structured fashion in a relational database. • The new HITRANonline interface offers increased functionality and easier error correction

A new relational database structure and online interface for the HITRAN database

Science.gov (United States)

Hill, Christian; Gordon, Iouli E.; Rothman, Laurence S.; Tennyson, Jonathan

2013-11-01

A new format for the HITRAN database is proposed. By storing the line-transition data in a number of linked tables described by a relational database schema, it is possible to overcome the limitations of the existing format, which have become increasingly apparent over the last few years as new and more varied data are being used by radiative-transfer models. Although the database in the new format can be searched using the well-established Structured Query Language (SQL), a web service, HITRANonline, has been deployed to allow users to make most common queries of the database using a graphical user interface in a web page. The advantages of the relational form of the database to ensuring data integrity and consistency are explored, and the compatibility of the online interface with the emerging standards of the Virtual Atomic and Molecular Data Centre (VAMDC) project is discussed. In particular, the ability to access HITRAN data using a standard query language from other websites, command line tools and from within computer programs is described.

Transmission line capital costs

International Nuclear Information System (INIS)

Hughes, K.R.; Brown, D.R.

1995-05-01

The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy's Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs

Dynamic Characteristics of Communication Lines with Distributed Parameters to Control the Throttle-controlled Hydraulic Actuators

Directory of Open Access Journals (Sweden)

D. N. Popov

2015-01-01

Full Text Available The article considers a mathematical model of the hydraulic line for remote control of electro-hydraulic servo drive (EHSD with throttle control. This type of hydraulic lines is designed as a backup to replace the electrical connections, which are used to control EHSD being remote from the site with devices located to form the control signals of any object. A disadvantage of electric connections is that they are sensitive to magnetic fields and thereby do not provide the required reliability of the remote control. Hydraulic lines have no this disadvantage and therefore are used in aircraft and other industrial systems. However, dynamic characteristics of hydraulic systems still have been investigated insufficiently in the case of transmitting control signals at a distance at which the signal may be distorted when emerging the wave processes.The article results of mathematical simulation, which are verified through physical experimentation, largely eliminate the shortcomings of said information.The mathematical model described in the paper is based on the theory of unsteady pressure compressible fluids. In the model there are formulas that provide calculation of frequency characteristics of the hydraulic lines under hydraulic oscillations of the laminar flow parameters of viscous fluid.A real mock-up of the system under consideration and an experimental ad hoc unit are used to verify the results of mathematically simulated hydraulic systems.Calculated logarithmic amplitude and phase frequency characteristics compared with those obtained experimentally prove, under certain conditions, the proposed theoretical method of calculation. These conditions have to ensure compliance with initial parameters of fluid defined under stationary conditions. The applied theory takes into consideration a non-stationary hydraulic resistance of the line when calculating frequency characteristics.The scientific novelty in the article material is presented in

Sex effect on productive parameters, carcass and body fat composition of two commercial broilers lines

Directory of Open Access Journals (Sweden)

S Rondelli

2003-12-01

Full Text Available The aim of this work was to evaluate sex effect on behavior of two commercial broilers lines. Productive parameters, carcass composition and yield, amount and quality of fat deposited in the meat and skin and total body fat were studied. A completely randomized design with four treatments (MR-Male Ross, HR-Female Ross, MAF-Male Avian Farm and HAF-Female Avian Farm and eight repetitions of 40 chickens was used. Animals received water and food ad libitum. After 50 days, two birds (a male and a female per repetition were chosen at random and slaughtered for carcass evaluation. Samples of breast, leg, skin and abdominal fats were analyzed to determine the percentage of intramuscular fat, total cholesterol and fatty acid composition. The Ross line showed higher final weight and weight gain, better intake and feed conversion rate. Also, it was observed that females of both lines had similar results in relation to these parameters. Better yield of breast with bone was found in Ross males and females. In relation to legs and thigh, Ross males showed better results and no differences were observed among females of both lines. Males deposited less fat than females. Finally, differences in percentage of intramuscular fat, content of cholesterol in breast with skin, leg with skin and skin, percentage of saturated, mono and polyunsaturated fatty acids were observed between sex and lines.

Mission critical database for SPS accelerator measurements

CERN Document Server

Billen, R; Laugier, I; Reguero, I; Segura, N

1995-01-01

In order to maintain efficient control over the hadron and lepton beams in CERN¹s SPS accelerator, measurements are of vital importance. Beam parameters such as intensities, positions and losses need to be rapidly available in the SPS control room to allow the operators to monitor, judge and act on beam physics conditions. For the 1994 SPS startup, a completely new and redesigned measurement system based on client and server C-programs running on UNIX-workstations was introduced. The kernel of this new measurement system is an on-line ORACLE database.The NIAM method was used for the database design as well as a technique to tag synchronized data with timeslots instead of timestamps. A great attention was paid to proper storage allocation for tables and indices since this has a major impact on the efficiency of the database, due to its time-critical nature. Many new features of Oracle7 were exploited to reduce the surrounding software.During the 1994 SPS physics run, this new measurement system was commission...

Study of NH3 Line Intensities in the THz and Far-IR Region

Science.gov (United States)

Yu, Shanshan

Ammonia (NH3) exists in the interstellar medium, late-type stars and giant planets of our solar system. Its temperature and abundance profiles in these environments, which are derived with its line parameters as fixed input , are commonly used to provide constraints on retrieving minor species. Therefore NH3 line parameters are essential for interpreting astrophysical and planetary spectra from Herschel, SOFIA, ALMA and JWST. However, our work under a predecessor grant with the APRA program revealed significant deficiencies in NH3 intensities in the terahertz and FIR region, including some weak Delta(K)=3 forbidden transitions predicted to be 100 times stronger. The Delta(K)=3 transitions are the ones connecting levels with different K values and therefore the only way other than collisions and l-doubled states to excite NH3 to K>0 levels. Their intensities have to be corrected to explain the observed high K excitation, such as the detection of NH3 (J,K) = (1,1), (2,2)&(14,14) and (18,18) transitions toward the galactic center star forming region Sgr B2, and to provide insights into the radiative- transfer vs. collision excitation mechanics of interstellar NH3. This proposal will remedy the serious deficiencies in the current databases involving NH3 line parameters in the terahertz and FIR region. We will target transitions with intensities greater than 10^{-23} cm-1/ (molecule/cm2) at 296 K, which will be among new astrophysical detections made by SOFIA, ALMA and JWST, and are 1000 times weaker than the strongest ground state transitions. We will retrieve new positions and intensities from existing laboratory spectra, use them to evaluate the current databases and ab initio calculations, and repair the line positions and intensities by replacing poorly calculated values with our new measurements. The proposed research will result in (1) a validated linelist containing the positions, intensities and lower state energies for the very important Delta(K)=3 NH3 FIR

The STARK-B database VAMDC node: a repository for spectral line broadening and shifts due to collisions with charged particles

Science.gov (United States)

Sahal-Bréchot, S.; Dimitrijević, M. S.; Moreau, N.; Ben Nessib, N.

2015-05-01

Accurate spectroscopic diagnostics and modeling require the knowledge of numerous collisional line profiles. Access to such data via an online database has become indispensable. The STARK-B database is aimed at meeting these needs for widths and shifts of isolated lines of neutral and ionized elements due to electron and ion impacts. This database of the Paris Observatory is a result of scientific cooperation between S Sahal-Bréchot (LERMA) and M S Dimitrijević (AOB). Access to it is free, and it was opened online at the end of 2008. STARK-B is a node of the Virtual Atomic and Molecular Data Centre (VAMDC) and thus complies with VAMDC and Virtual Observatory standards. VAMDC is a European Union-funded collaboration among groups involved in the generation and use of interoperable atomic and molecular data. STARK-B now contains all our semiclassical-perturbation (SCP) calculated data for more than 123 neutral or ionized elements as published in international refereed journals. It is devoted to modeling and spectroscopic diagnostics of stellar atmospheres and envelopes, laboratory plasmas, laser equipment, and technological plasmas. Hence, the range of temperatures and densities covered by the tables is broad and depends on the ionization degree of the radiating atom. The modified semiempirical (MSE) results of calculations have begun to be implemented. In this paper, we highlight the key points of the method and the assumptions used in the calculations, which have lately been revisited. Then we present the database and its recent developments, as well as our ongoing work and our plans for the future.

The STARK-B database VAMDC node: a repository for spectral line broadening and shifts due to collisions with charged particles

International Nuclear Information System (INIS)

Sahal-Bréchot, S; Moreau, N; Dimitrijević, M S; Nessib, N Ben

2015-01-01

Accurate spectroscopic diagnostics and modeling require the knowledge of numerous collisional line profiles. Access to such data via an online database has become indispensable. The STARK-B database is aimed at meeting these needs for widths and shifts of isolated lines of neutral and ionized elements due to electron and ion impacts. This database of the Paris Observatory is a result of scientific cooperation between S Sahal-Bréchot (LERMA) and M S Dimitrijević (AOB). Access to it is free, and it was opened online at the end of 2008. STARK-B is a node of the Virtual Atomic and Molecular Data Centre (VAMDC) and thus complies with VAMDC and Virtual Observatory standards. VAMDC is a European Union-funded collaboration among groups involved in the generation and use of interoperable atomic and molecular data. STARK-B now contains all our semiclassical-perturbation (SCP) calculated data for more than 123 neutral or ionized elements as published in international refereed journals. It is devoted to modeling and spectroscopic diagnostics of stellar atmospheres and envelopes, laboratory plasmas, laser equipment, and technological plasmas. Hence, the range of temperatures and densities covered by the tables is broad and depends on the ionization degree of the radiating atom. The modified semiempirical (MSE) results of calculations have begun to be implemented. In this paper, we highlight the key points of the method and the assumptions used in the calculations, which have lately been revisited. Then we present the database and its recent developments, as well as our ongoing work and our plans for the future. (paper)

New spectroscopy in the HITRAN2016 database and its impact on atmospheric retrievals

Science.gov (United States)

Gordon, I.; Rothman, L. S.; Kochanov, R. V.; Tan, Y.; Toon, G. C.

2017-12-01

The HITRAN spectroscopic database is a backbone of the interpretation of spectral atmospheric retrievals and is an important input to the radiative transfer codes. The database is serving the atmospheric community for nearly half-a-century with every new edition being released every four years. The most recent release of the database is HITRAN2016 [1]. It consists of line-by-line lists, experimental absorption cross-sections, collision-induced absorption data and aerosol indices of refraction. In this presentation it will be stressed the importance of using the most recent edition of the database in the radiative transfer codes. The line-by-line lists for most of the HITRAN molecules were updated (and two new molecules added) in comparison with the previous compilation HITRAN2012 [2] that has been in use, along with some intermediate updates, since 2012. The extent of the updates ranges from updating a few lines of certain molecules to complete replacements of the lists and introduction of additional isotopologues. In addition, the amount of molecules in cross-sectional part of the database has increased dramatically from nearly 50 to over 300. The molecules covered by the HITRAN database are important in planetary remote sensing, environment monitoring (in particular, biomass burning detection), climate applications, industrial pollution tracking, atrophysics, and more. Taking advantage of the new structure and interface available at www.hitran.org [3] and the HITRAN Application Programming Interface [4] the amount of parameters has also been significantly increased, now incorporating, for instance, non-Voigt line profiles [5]; broadening by gases other than air and "self" [6]; and other phenomena, including line mixing. This is a very important novelty that needs to be properly introduced in the radiative transfer codes in order to advance accurate interpretation of the remote sensing retrievals. This work is supported by the NASA PDART (NNX16AG51G) and AURA (NNX

On-line use of personal computers to monitor and evaluate important parameters in the research reactor DHRUVA

International Nuclear Information System (INIS)

Sharma, S.K.; Sengupta, S.N.; Darbhe, M.D.; Agarwal, S.K.

1998-01-01

The on-line use of Personal Computers in research reactors, with custom made applications for aiding the operators in analysing plant conditions under normal and abnormal situations, has become extremely popular. A system has been developed to monitor and evaluate important parameters for the research reactor DHRUVA, a 100 MW research reactor located at the Bhabha Atomic Research Centre, Trombay. The system was essentially designed for on-line computation of the following parameters: reactor thermal power, reactivity load due to Xenon, core reactivity balance and performance monitoring of shut-down devices. Apart from the on-line applications, the system has also been developed to cater some off-line applications with Local Area Network in the Dhruva complex. The microprocessor based system is designed to function as an independent unit, parallel dumping the acquired data to a PC for application programmes. The user interface on the personal computer is menu driven application software written in 'C' language. The main input parameters required for carrying out the options given in the above menu are: Reactor power, Moderator level, Coolant inlet temperature to the core, Secondary coolant flow rate, temperature rise of secondary coolant across the heat exchangers, heavy water level in the Dump tank and Drop time of individual shut off rods. (author)

Joint Data Assimilation and Parameter Calibration in on-line groundwater modelling using Sequential Monte Carlo techniques

Science.gov (United States)

Ramgraber, M.; Schirmer, M.

2017-12-01

As computational power grows and wireless sensor networks find their way into common practice, it becomes increasingly feasible to pursue on-line numerical groundwater modelling. The reconciliation of model predictions with sensor measurements often necessitates the application of Sequential Monte Carlo (SMC) techniques, most prominently represented by the Ensemble Kalman Filter. In the pursuit of on-line predictions it seems advantageous to transcend the scope of pure data assimilation and incorporate on-line parameter calibration as well. Unfortunately, the interplay between shifting model parameters and transient states is non-trivial. Several recent publications (e.g. Chopin et al., 2013, Kantas et al., 2015) in the field of statistics discuss potential algorithms addressing this issue. However, most of these are computationally intractable for on-line application. In this study, we investigate to what extent compromises between mathematical rigour and computational restrictions can be made within the framework of on-line numerical modelling of groundwater. Preliminary studies are conducted in a synthetic setting, with the goal of transferring the conclusions drawn into application in a real-world setting. To this end, a wireless sensor network has been established in the valley aquifer around Fehraltorf, characterized by a highly dynamic groundwater system and located about 20 km to the East of Zürich, Switzerland. By providing continuous probabilistic estimates of the state and parameter distribution, a steady base for branched-off predictive scenario modelling could be established, providing water authorities with advanced tools for assessing the impact of groundwater management practices. Chopin, N., Jacob, P.E. and Papaspiliopoulos, O. (2013): SMC2: an efficient algorithm for sequential analysis of state space models. Journal of the Royal Statistical Society: Series B (Statistical Methodology), 75 (3), p. 397-426. Kantas, N., Doucet, A., Singh, S

CHIANTI—AN ATOMIC DATABASE FOR EMISSION LINES. XII. VERSION 7 OF THE DATABASE

International Nuclear Information System (INIS)

Landi, E.; Del Zanna, G.; Mason, H. E.; Young, P. R.; Dere, K. P.

2012-01-01

The CHIANTI spectral code consists of an atomic database and a suite of computer programs to calculate the optically thin spectrum of astrophysical objects and carry out spectroscopic plasma diagnostics. The database includes atomic energy levels, wavelengths, radiative transition probabilities, collision excitation rate coefficients, and ionization and recombination rate coefficients, as well as data to calculate free-free, free-bound, and two-photon continuum emission. Version 7 has been released, which includes several new ions, significant updates to existing ions, as well as Chianti-Py, the implementation of CHIANTI software in the Python programming language. All data and programs are freely available at http://www.chiantidatabase.org, while the Python interface to CHIANTI can be found at http://chiantipy.sourceforge.net.

CHIANTI-AN ATOMIC DATABASE FOR EMISSION LINES. XII. VERSION 7 OF THE DATABASE

Energy Technology Data Exchange (ETDEWEB)

Landi, E. [Department of Atmospheric, Oceanic and Space Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Del Zanna, G.; Mason, H. E. [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom); Young, P. R. [College of Science, George Mason University, 4400 University Drive, Fairfax, VA, 22030 (United States); Dere, K. P. [School of Physics, Astronomy and Computational Sciences, MS 6A2, George Mason University, 4400 University Drive, Fairfax, VA 22030 (United States)

2012-01-10

The CHIANTI spectral code consists of an atomic database and a suite of computer programs to calculate the optically thin spectrum of astrophysical objects and carry out spectroscopic plasma diagnostics. The database includes atomic energy levels, wavelengths, radiative transition probabilities, collision excitation rate coefficients, and ionization and recombination rate coefficients, as well as data to calculate free-free, free-bound, and two-photon continuum emission. Version 7 has been released, which includes several new ions, significant updates to existing ions, as well as Chianti-Py, the implementation of CHIANTI software in the Python programming language. All data and programs are freely available at http://www.chiantidatabase.org, while the Python interface to CHIANTI can be found at http://chiantipy.sourceforge.net.

Establishment of database for Japan Sea parameters on marine environment and radioactivity (JASPER). Volume 2. Radiocarbon and oceanographic properties

International Nuclear Information System (INIS)

Otosaka, Shigeyoshi; Suzuki, Takashi; Ito, Toshimichi; Kobayashi, Takuya; Kawamura, Hideyuki; Togawa, Orihiko; Tanaka, Takayuki; Minakawa, Masayuki; Aramaki, Takafumi; Senjyu, Tomoharu

2010-02-01

The database for the Japan Sea Parameters on Marine Environment and Radionuclides (JASPER) has been established by the Japan Atomic Energy Agency as a product of the Japan Sea Expeditions. By the previous volume of the database, data for representative anthropogenic radionuclides (strontium-90, cesium-137, and plutonium-239, 240) were opened to public. And now, data for radiocarbon and fundamental oceanographic properties (salinity, temperature, dissolved oxygen) including nutrients (silicate, phosphate, nitrate and nitrite) are released as the second volume of the database. At the beginning of this report (chapter 1), backgrounds, objectives and brief overview of this report are given as an introduction. Then, specifications of this database and methodology in obtaining the concentration data are described in chapter 2. The data stored in the database are presented in tabular and figure forms in chapter 3. Finally, chapter 4 is assigned concluding remarks. In the second version of database, 20,292 data records are stored in the database including 2,695 data for temperature, 2,883 data for salinity, 2,109 data for dissolved oxygen, 11,051 data for the nutrients, and 1,660 data for radiocarbon. The database will be a strong tool for the continuous monitoring for contamination by anthropogenic radionuclides, studies on biogeochemical cycle, and development/validation of models for numerical simulations in the sea. (author)

Estimating genetic parameters for fertility in dairy cows from in-line milk progesterone profiles

NARCIS (Netherlands)

Tenghe, A.M.M.; Bouwman, A.C.; Berglund, B.; Strandberg, E.; Blom, J.; Veerkamp, R.F.

2015-01-01

The aim of this study was to define endocrine fertility traits from in-line milk progesterone (P4) records and to estimate genetic parameters for these traits. Correlations of classical fertility (calving interval and calving to first service) and milk production traits with endocrine fertility

Temporal evolution of the spectral lines emission and temperatures in laser induced plasmas through characteristic parameters

International Nuclear Information System (INIS)

Bredice, F.; Pacheco Martinez, P.; Sánchez-Aké, C.; Villagrán-Muniz, M.

2015-01-01

In this work, we propose an extended Boltzmann plot method to determine the usefulness of spectral lines for plasma parameter calculations. Based on the assumption that transient plasmas are under ideal conditions during an specific interval of time Δt, (i.e. thin, homogeneous and in local thermodynamic equilibrium (LTE)), the associated Boltzmann plots describe a surface in the space defined by the coordinates X = Energy, Y = Time and Z = ln (λ jl I j /g j A jl ), where I j is the integrated intensity of the spectral line, g j is the statistical weight of the level j, λ jl is the wavelength of the considered line and A jl is its transition rate. In order to express the Boltzmann plot surface in terms of a reduced set of constants B i , and δ i , we developed as a power series of time, the logarithm of I n (t)/I n (t 0 ), where I n (t) is the integrated intensity of any spectral line at time t, and I n (t 0 ) at initial time. Moreover, the temporal evolution of the intensity of any spectral line and consequently the temperature of the plasma can be also expressed with these constants. The comparison of the temporal evolution of the line intensity calculated using these constants with their experimental values, can be used as a criterion for selecting useful lines in plasma analysis. Furthermore, this method can also be applied to determine self-absorption or enhancement of the spectral lines, to evaluate a possible departure of LTE, and to check or estimate the upper level energy value of any spectral line. An advantage of this method is that the value of these constants does not depend on the spectral response of the detection system, the uncertainty of the transition rates belonging to the analyzed spectral lines or any other time-independent parameters. In order to prove our method, we determined the constants B i and δ i and therefore the Boltzmann plot surface from the temporal evolution of carbon lines obtained from a plasma generated by a Nd:YAG laser

The Genomes OnLine Database (GOLD) v.5: a metadata management system based on a four level (meta)genome project classification

Science.gov (United States)

Reddy, T.B.K.; Thomas, Alex D.; Stamatis, Dimitri; Bertsch, Jon; Isbandi, Michelle; Jansson, Jakob; Mallajosyula, Jyothi; Pagani, Ioanna; Lobos, Elizabeth A.; Kyrpides, Nikos C.

2015-01-01

The Genomes OnLine Database (GOLD; http://www.genomesonline.org) is a comprehensive online resource to catalog and monitor genetic studies worldwide. GOLD provides up-to-date status on complete and ongoing sequencing projects along with a broad array of curated metadata. Here we report version 5 (v.5) of the database. The newly designed database schema and web user interface supports several new features including the implementation of a four level (meta)genome project classification system and a simplified intuitive web interface to access reports and launch search tools. The database currently hosts information for about 19 200 studies, 56 000 Biosamples, 56 000 sequencing projects and 39 400 analysis projects. More than just a catalog of worldwide genome projects, GOLD is a manually curated, quality-controlled metadata warehouse. The problems encountered in integrating disparate and varying quality data into GOLD are briefly highlighted. GOLD fully supports and follows the Genomic Standards Consortium (GSC) Minimum Information standards. PMID:25348402

The Genomes OnLine Database (GOLD) v.5: a metadata management system based on a four level (meta)genome project classification

Energy Technology Data Exchange (ETDEWEB)

Reddy, Tatiparthi B. K. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Thomas, Alex D. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Stamatis, Dimitri [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Bertsch, Jon [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Isbandi, Michelle [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Jansson, Jakob [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Mallajosyula, Jyothi [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Pagani, Ioanna [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lobos, Elizabeth A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Kyrpides, Nikos C. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); King Abdulaziz Univ., Jeddah (Saudi Arabia)

2014-10-27

The Genomes OnLine Database (GOLD; http://www.genomesonline.org) is a comprehensive online resource to catalog and monitor genetic studies worldwide. GOLD provides up-to-date status on complete and ongoing sequencing projects along with a broad array of curated metadata. Within this paper, we report version 5 (v.5) of the database. The newly designed database schema and web user interface supports several new features including the implementation of a four level (meta)genome project classification system and a simplified intuitive web interface to access reports and launch search tools. The database currently hosts information for about 19 200 studies, 56 000 Biosamples, 56 000 sequencing projects and 39 400 analysis projects. More than just a catalog of worldwide genome projects, GOLD is a manually curated, quality-controlled metadata warehouse. The problems encountered in integrating disparate and varying quality data into GOLD are briefly highlighted. Lastly, GOLD fully supports and follows the Genomic Standards Consortium (GSC) Minimum Information standards.

Off-line tracking of series parameters in distribution systems using AMI data

Energy Technology Data Exchange (ETDEWEB)

Williams, Tess L.; Sun, Yannan; Schneider, Kevin

2016-05-01

Electric distribution systems have historically lacked measurement points, and equipment is often operated to its failure point, resulting in customer outages. The widespread deployment of sensors at the distribution level is enabling observability. This paper presents an off-line parameter value tracking procedure that takes advantage of the increasing number of measurement devices being deployed at the distribution level to estimate changes in series impedance parameter values over time. The tracking of parameter values enables non-diurnal and non-seasonal change to be flagged for investigation. The presented method uses an unbalanced Distribution System State Estimation (DSSE) and a measurement residual-based parameter estimation procedure. Measurement residuals from multiple measurement snapshots are combined in order to increase the effective local redundancy and improve the robustness of the calculations in the presence of measurement noise. Data from devices on the primary distribution system and from customer meters, via an AMI system, form the input data set. Results of simulations on the IEEE 13-Node Test Feeder are presented to illustrate the proposed approach applied to changes in series impedance parameters. A 5% change in series resistance elements can be detected in the presence of 2% measurement error when combining less than 1 day of measurement snapshots into a single estimate.

Archives of Astronomical Spectral Observations and Atomic/Molecular Databases for their Analysis

Directory of Open Access Journals (Sweden)

Ryabchikova T.

2015-12-01

Full Text Available We present a review of open-source data for stellar spectroscopy investigations. It includes lists of the main archives of medium-to-high resolution spectroscopic observations, with brief characteristics of the archive data (spectral range, resolving power, flux units. We also review atomic and molecular databases that contain parameters of spectral lines, cross-sections and reaction rates needed for a detailed analysis of high resolution, high signal-to-noise ratio stellar spectra.

Resist Parameter Extraction from Line-and-Space Patterns of Chemically Amplified Resist for Extreme Ultraviolet Lithography

Science.gov (United States)

Kozawa, Takahiro; Oizumi, Hiroaki; Itani, Toshiro; Tagawa, Seiichi

2010-11-01

The development of extreme ultraviolet (EUV) lithography has progressed owing to worldwide effort. As the development status of EUV lithography approaches the requirements for the high-volume production of semiconductor devices with a minimum line width of 22 nm, the extraction of resist parameters becomes increasingly important from the viewpoints of the accurate evaluation of resist materials for resist screening and the accurate process simulation for process and mask designs. In this study, we demonstrated that resist parameters (namely, quencher concentration, acid diffusion constant, proportionality constant of line edge roughness, and dissolution point) can be extracted from the scanning electron microscopy (SEM) images of patterned resists without the knowledge on the details of resist contents using two types of latest EUV resist.

Q-bank phytoplasma database

DEFF Research Database (Denmark)

Contaldo, Nicoletta; Bertaccini, Assunta; Nicolaisen, Mogens

2014-01-01

The setting of the Q-Bank database free available on line for quarantine phytoplasma and also for general phytoplasma identification is described. The tool was developed in the frame of the EU-FP7 project Qbol and is linked with a new project Q-collect in order to made widely available the identi......The setting of the Q-Bank database free available on line for quarantine phytoplasma and also for general phytoplasma identification is described. The tool was developed in the frame of the EU-FP7 project Qbol and is linked with a new project Q-collect in order to made widely available...

THE EXTRAGALACTIC DISTANCE DATABASE: ALL DIGITAL H I PROFILE CATALOG

International Nuclear Information System (INIS)

Courtois, Helene M.; Bonhomme, Nicolas; Tully, R. Brent; Zavodny, Maximilian; Barnes, Austin; Fisher, J. Richard

2009-01-01

An important component of the Extragalactic Distance Database is a group of catalogs related to the measurement of H I line profile parameters. One of these is the All Digital H I catalog which contains an amalgam of information from new data and old. The new data result from observations with Arecibo and Parkes Telescopes and with the Green Bank Telescope, including continuing input since the award of the NRAO Cosmic Flows Large Program. The old data have been collected from archives, wherever available, particularly the Cornell University Digital H I Archive, the Nancay Telescope extragalactic H I archive, and the Australia Telescope H I archive. The catalog currently contains information on ∼15, 000 profiles relating to ∼13, 000 galaxies. The channel-flux per channel files, from whatever source, is carried through a common pipeline. The derived parameter of greatest interest is W m50 , the profile width at 50% of the mean flux. After appropriate adjustment, the parameter W mx is derived, the line width that statistically approximates the peak-to-peak maximum rotation velocity before correction for inclination, 2V max sini.

Temporal evolution of the spectral lines emission and temperatures in laser induced plasmas through characteristic parameters

Energy Technology Data Exchange (ETDEWEB)

Bredice, F., E-mail: faustob@ciop.unlp.edu.ar [Centro de Investigaciones Ópticas, P.O. Box 3 C. P.1897 Gonnet, La Plata (Argentina); Pacheco Martinez, P. [Grupo de Espectroscopía Óptica de Emisión y Láser, Universidad del Atlántico, Barranquilla (Colombia); Sánchez-Aké, C.; Villagrán-Muniz, M. [Laboratorio de Fotofísica, Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Apartado Postal 70-186, México D.F. 04510 (Mexico)

2015-05-01

In this work, we propose an extended Boltzmann plot method to determine the usefulness of spectral lines for plasma parameter calculations. Based on the assumption that transient plasmas are under ideal conditions during an specific interval of time Δt, (i.e. thin, homogeneous and in local thermodynamic equilibrium (LTE)), the associated Boltzmann plots describe a surface in the space defined by the coordinates X = Energy, Y = Time and Z = ln (λ{sub jl}I{sub j}/g{sub j}A{sub jl}), where I{sub j} is the integrated intensity of the spectral line, g{sub j} is the statistical weight of the level j, λ{sub jl} is the wavelength of the considered line and A{sub jl} is its transition rate. In order to express the Boltzmann plot surface in terms of a reduced set of constants B{sub i}, and δ{sub i}, we developed as a power series of time, the logarithm of I{sub n}(t)/I{sub n}(t{sub 0}), where I{sub n}(t) is the integrated intensity of any spectral line at time t, and I{sub n}(t{sub 0}) at initial time. Moreover, the temporal evolution of the intensity of any spectral line and consequently the temperature of the plasma can be also expressed with these constants. The comparison of the temporal evolution of the line intensity calculated using these constants with their experimental values, can be used as a criterion for selecting useful lines in plasma analysis. Furthermore, this method can also be applied to determine self-absorption or enhancement of the spectral lines, to evaluate a possible departure of LTE, and to check or estimate the upper level energy value of any spectral line. An advantage of this method is that the value of these constants does not depend on the spectral response of the detection system, the uncertainty of the transition rates belonging to the analyzed spectral lines or any other time-independent parameters. In order to prove our method, we determined the constants B{sub i} and δ{sub i} and therefore the Boltzmann plot surface from the temporal

A virtual observatory for photoionized nebulae: the Mexican Million Models database (3MdB).

Science.gov (United States)

Morisset, C.; Delgado-Inglada, G.; Flores-Fajardo, N.

2015-04-01

Photoionization models obtained with numerical codes are widely used to study the physics of the interstellar medium (planetary nebulae, HII regions, etc). Grids of models are performed to understand the effects of the different parameters used to describe the regions on the observables (mainly emission line intensities). Most of the time, only a small part of the computed results of such grids are published, and they are sometimes hard to obtain in a user-friendly format. We present here the Mexican Million Models dataBase (3MdB), an effort to resolve both of these issues in the form of a database of photoionization models, easily accessible through the MySQL protocol, and containing a lot of useful outputs from the models, such as the intensities of 178 emission lines, the ionic fractions of all the ions, etc. Some examples of the use of the 3MdB are also presented.

Recursive Estimation of π-Line Parameters for Electric Power Distribution Grids

DEFF Research Database (Denmark)

Prostejovsky, Alexander; Gehrke, Oliver; Kosek, Anna Magdalena

2016-01-01

an Extended Kalman Filter (EKF) whose measurement noise covariance matrix is modified in order to account for all noisy variables in the overdetermined system. Simulations confirm the advantages of the EKF over the previously used Least-Squares (LSQ) estimator. In the low random noise cases considered...... in this paper, the EKF yields a four-fold improvement over the LSQ for the parallel susceptance across all quantization ranges. For the highest levels of random and quantization noise, the EKF performs about 1.5 to 3 times better than the LSQ for all line parameters. Furthermore, the EKF shows more consistent...

The Belgian repository of fundamental atomic data and stellar spectra (BRASS). I. Cross-matching atomic databases of astrophysical interest

Science.gov (United States)

Laverick, M.; Lobel, A.; Merle, T.; Royer, P.; Martayan, C.; David, M.; Hensberge, H.; Thienpont, E.

2018-04-01

Context. Fundamental atomic parameters, such as oscillator strengths, play a key role in modelling and understanding the chemical composition of stars in the Universe. Despite the significant work underway to produce these parameters for many astrophysically important ions, uncertainties in these parameters remain large and can propagate throughout the entire field of astronomy. Aims: The Belgian repository of fundamental atomic data and stellar spectra (BRASS) aims to provide the largest systematic and homogeneous quality assessment of atomic data to date in terms of wavelength, atomic and stellar parameter coverage. To prepare for it, we first compiled multiple literature occurrences of many individual atomic transitions, from several atomic databases of astrophysical interest, and assessed their agreement. In a second step synthetic spectra will be compared against extremely high-quality observed spectra, for a large number of BAFGK spectral type stars, in order to critically evaluate the atomic data of a large number of important stellar lines. Methods: Several atomic repositories were searched and their data retrieved and formatted in a consistent manner. Data entries from all repositories were cross-matched against our initial BRASS atomic line list to find multiple occurrences of the same transition. Where possible we used a new non-parametric cross-match depending only on electronic configurations and total angular momentum values. We also checked for duplicate entries of the same physical transition, within each retrieved repository, using the non-parametric cross-match. Results: We report on the number of cross-matched transitions for each repository and compare their fundamental atomic parameters. We find differences in log(gf) values of up to 2 dex or more. We also find and report that 2% of our line list and Vienna atomic line database retrievals are composed of duplicate transitions. Finally we provide a number of examples of atomic spectral lines

JT-60 database system, 2

International Nuclear Information System (INIS)

Itoh, Yasuhiro; Kurihara, Kenichi; Kimura, Toyoaki.

1987-07-01

The JT-60 central control system, ''ZENKEI'' collects the control and instrumentation data relevant to discharge and device status data for plant monitoring. The former of the engineering data amounts to about 3 Mbytes per shot of discharge. The ''ZENKEI'' control system which consists of seven minicomputers for on-line real-time control has little performance of handling such a large amount of data for physical and engineering analysis. In order to solve this problem, it was planned to establish the experimental database on the Front-end Processor (FEP) of general purpose large computer in JAERI Computer Center. The database management system (DBMS), therefore, has been developed for creating the database during the shot interval. The engineering data are shipped up from ''ZENKEI'' to FEP through the dedicated communication line after the shot. The hierarchical data model has been adopted in this database, which consists of the data files with tree structure of three keys of system, discharge type and shot number. The JT-60 DBMS provides the data handling packages of subroutines for interfacing the database with user's application programs. The subroutine packages for supporting graphic processing and the function of access control for security of the database are also prepared in this DBMS. (author)

Numerical Evaluation of Parameter Correlation in the Hartmann-Tran Line Profile

Science.gov (United States)

Adkins, Erin M.; Reed, Zachary; Hodges, Joseph T.

2017-06-01

The partially correlated quadratic, speed-dependent hard-collision profile (pCqSDHCP), for simplicity referred to as the Hartmann-Tran profile (HTP), has been recommended as a generalized lineshape for high resolution spectroscopy. The HTP parameterizes complex collisional effects such as Dicke narrowing, speed dependent narrowing, and correlations between velocity-changing and dephasing collisions, while also simplifying to simpler profiles that are widely used, such as the Voigt profile. As advanced lineshape profiles are adopted by more researchers, it is important to understand the limitations that data quality has on the ability to retrieve physically meaningful parameters using sophisticated lineshapes that are fit to spectra of finite signal-to-noise ratio. In this work, spectra were simulated using the HITRAN Application Programming Interface (HAPI) across a full range of line parameters. Simulated spectra were evaluated to quantify the precision with which fitted lineshape parameters can be determined at a given signal-to-noise ratio, focusing on the numerical correlation between the retrieved Dicke narrowing frequency and the velocity-changing and dephasing collisions correlation parameter. Tran, H., N. Ngo, and J.-M. Hartmann, Journal of Quantitative Spectroscopy and Radiative Transfer 2013. 129: p. 89-100. Tennyson, et al., Pure Appl. Chem. 2014, 86: p. 1931-1943. Kochanov, R.V., et al., Journal of Quantitative Spectroscopy and Radiative Transfer 2016. 177: p. 15-30. Tran, H., N. Ngo, and J.-M. Hartmann, Journal of Quantitative Spectroscopy and Radiative Transfer 2013. 129: p. 199-203.

RiceFOX: a database of Arabidopsis mutant lines overexpressing rice full-length cDNA that contains a wide range of trait information to facilitate analysis of gene function.

Science.gov (United States)

Sakurai, Tetsuya; Kondou, Youichi; Akiyama, Kenji; Kurotani, Atsushi; Higuchi, Mieko; Ichikawa, Takanari; Kuroda, Hirofumi; Kusano, Miyako; Mori, Masaki; Saitou, Tsutomu; Sakakibara, Hitoshi; Sugano, Shoji; Suzuki, Makoto; Takahashi, Hideki; Takahashi, Shinya; Takatsuji, Hiroshi; Yokotani, Naoki; Yoshizumi, Takeshi; Saito, Kazuki; Shinozaki, Kazuo; Oda, Kenji; Hirochika, Hirohiko; Matsui, Minami

2011-02-01

Identification of gene function is important not only for basic research but also for applied science, especially with regard to improvements in crop production. For rapid and efficient elucidation of useful traits, we developed a system named FOX hunting (Full-length cDNA Over-eXpressor gene hunting) using full-length cDNAs (fl-cDNAs). A heterologous expression approach provides a solution for the high-throughput characterization of gene functions in agricultural plant species. Since fl-cDNAs contain all the information of functional mRNAs and proteins, we introduced rice fl-cDNAs into Arabidopsis plants for systematic gain-of-function mutation. We generated >30,000 independent Arabidopsis transgenic lines expressing rice fl-cDNAs (rice FOX Arabidopsis mutant lines). These rice FOX Arabidopsis lines were screened systematically for various criteria such as morphology, photosynthesis, UV resistance, element composition, plant hormone profile, metabolite profile/fingerprinting, bacterial resistance, and heat and salt tolerance. The information obtained from these screenings was compiled into a database named 'RiceFOX'. This database contains around 18,000 records of rice FOX Arabidopsis lines and allows users to search against all the observed results, ranging from morphological to invisible traits. The number of searchable items is approximately 100; moreover, the rice FOX Arabidopsis lines can be searched by rice and Arabidopsis gene/protein identifiers, sequence similarity to the introduced rice fl-cDNA and traits. The RiceFOX database is available at http://ricefox.psc.riken.jp/.

The 2003 edition of geisa: a spectroscopic database system for the second generation vertical sounders radiance simulation

Science.gov (United States)

Jacquinet-Husson, N.; Lmd Team

The GEISA (Gestion et Etude des Informations Spectroscopiques Atmosphériques: Management and Study of Atmospheric Spectroscopic Information) computer accessible database system, in its former 1997 and 2001 versions, has been updated in 2003 (GEISA-03). It is developed by the ARA (Atmospheric Radiation Analysis) group at LMD (Laboratoire de Météorologie Dynamique, France) since 1974. This early effort implemented the so-called `` line-by-line and layer-by-layer '' approach for forward radiative transfer modelling action. The GEISA 2003 system comprises three databases with their associated management softwares: a database of spectroscopic parameters required to describe adequately the individual spectral lines belonging to 42 molecules (96 isotopic species) and located in a spectral range from the microwave to the limit of the visible. The featured molecules are of interest in studies of the terrestrial as well as the other planetary atmospheres, especially those of the Giant Planets. a database of absorption cross-sections of molecules such as chlorofluorocarbons which exhibit unresolvable spectra. a database of refractive indices of basic atmospheric aerosol components. Illustrations will be given of GEISA-03, data archiving method, contents, management softwares and Web access facilities at: http://ara.lmd.polytechnique.fr The performance of instruments like AIRS (Atmospheric Infrared Sounder; http://www-airs.jpl.nasa.gov) in the USA, and IASI (Infrared Atmospheric Sounding Interferometer; http://smsc.cnes.fr/IASI/index.htm) in Europe, which have a better vertical resolution and accuracy, compared to the presently existing satellite infrared vertical sounders, is directly related to the quality of the spectroscopic parameters of the optically active gases, since these are essential input in the forward models used to simulate recorded radiance spectra. For these upcoming atmospheric sounders, the so-called GEISA/IASI sub-database system has been elaborated

DASTCOM5: A Portable and Current Database of Asteroid and Comet Orbit Solutions

Science.gov (United States)

Giorgini, Jon D.; Chamberlin, Alan B.

2014-11-01

A portable direct-access database containing all NASA/JPL asteroid and comet orbit solutions, with the software to access it, is available for download (ftp://ssd.jpl.nasa.gov/pub/xfr/dastcom5.zip; unzip -ao dastcom5.zip). DASTCOM5 contains the latest heliocentric IAU76/J2000 ecliptic osculating orbital elements for all known asteroids and comets as determined by a least-squares best-fit to ground-based optical, spacecraft, and radar astrometric measurements. Other physical, dynamical, and covariance parameters are included when known. A total of 142 parameters per object are supported within DASTCOM5. This information is suitable for initializing high-precision numerical integrations, assessing orbit geometry, computing trajectory uncertainties, visual magnitude, and summarizing physical characteristics of the body. The DASTCOM5 distribution is updated as often as hourly to include newly discovered objects or orbit solution updates. It includes an ASCII index of objects that supports look-ups based on name, current or past designation, SPK ID, MPC packed-designations, or record number. DASTCOM5 is the database used by the NASA/JPL Horizons ephemeris system. It is a subset exported from a larger MySQL-based relational Small-Body Database ("SBDB") maintained at JPL. The DASTCOM5 distribution is intended for programmers comfortable with UNIX/LINUX/MacOSX command-line usage who need to develop stand-alone applications. The goal of the implementation is to provide small, fast, portable, and flexibly programmatic access to JPL comet and asteroid orbit solutions. The supplied software library, examples, and application programs have been verified under gfortran, Lahey, Intel, and Sun 32/64-bit Linux/UNIX FORTRAN compilers. A command-line tool ("dxlook") is provided to enable database access from shell or script environments.

Measurement and computations of line shape parameters for the 12201 ← 03301, 11101 ← 10002 and 12201 ← 11102 self-broadened CO2 Q-branches

Science.gov (United States)

Al Mashwood, Abdullah; Predoi-Cross, Adriana; Devi, V. Malathy; Rozario, Hoimonti; Billinghurst, Brant

2018-06-01

Pure CO2 spectra recorded at room temperature and different pressures (0.2-140 Torr) have been analyzed with the help of a fitting routine that takes into account asymmetries arising in the spectral lines due to pressure induced effects such as line mixing. The fitting procedure used in this study allows one to adjust the ro-vibrational constants for the band rather than fitting for individual line parameters. These constrained parameters greatly reduce the measurement uncertainties and allow us to observe the behavior of the weak lines corresponding to high J quantum numbers. We have also calculated line mixing parameters using approximations based on exponential nature of the energy difference between ground and upper vibrational states involved in the ro-vibrational band transitions. The calculated results show good agreement when compared with the experimentally determined parameters.

Time variations of oxygen emission lines and solar wind dynamic parameters in low latitude region

Science.gov (United States)

Jamlongkul, P.; Wannawichian, S.; Mkrtichian, D.; Sawangwit, U.; A-thano, N.

2017-09-01

Aurora phenomenon is an effect of collision between precipitating particles with gyromotion along Earth’s magnetic field and Earth’s ionospheric atoms or molecules. The particles’ precipitation occurs normally around polar regions. However, some auroral particles can reach lower latitude regions when they are highly energetic. A clear emission from Earth’s aurora is mostly from atomic oxygen. Moreover, the sun’s activities can influence the occurrence of the aurora as well. This work studies time variations of oxygen emission lines and solar wind parameters, simultaneously. The emission’s spectral lines were observed by Medium Resolution Echelle Spectrograph (MRES) along with 2.4 meters diameter telescope at Thai National Observatory, Intanon Mountain, Chiang Mai, Thailand. Oxygen (OI) emission lines were calibrated by Dech-Fits spectra processing program and Dech95 2D image processing program. The correlations between oxygen emission lines and solar wind dynamics will be analyzed. This result could be an evidence of the aurora in low latitude region.

On-Line Flutter Prediction Tool for Wind Tunnel Flutter Testing using Parameter Varying Estimation Methodology, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — ZONA Technology, Inc. (ZONA) proposes to develop an on-line flutter prediction tool for wind tunnel model using the parameter varying estimation (PVE) technique to...

Black Hole Mass Estimation in Type 1 AGN: Hβ vs. Mg II Lines and the Role of Balmer Continuum

Energy Technology Data Exchange (ETDEWEB)

Kovačević-Dojčinović, Jelena [Astronomical Observatory, Belgrade (Serbia); Marčeta-Mandić, Sladjana; Popović, Luka Č., E-mail: sladjana@aob.rs [Astronomical Observatory, Belgrade (Serbia); Department of Astronomy, Faculty of Mathematics, University of Belgrade, Belgrade (Serbia)

2017-07-24

Here we investigate the Hβ and Mg II spectral line parameters used for the black hole mass (M{sub BH}) estimation for a sample of Type 1 Active Galactic Nuclei (AGN) spectra selected from the Sloan Digital Sky Survey (SDSS) database. We have analyzed and compared the virialization of the Hβ and Mg II emission lines, and found that the Hβ line is more confident virial estimator than Mg II. We have investigated the influence of the Balmer continuum emission to the M{sub BH} estimation from the UV parameters, and found that the Balmer continuum emission can contribute to the overestimation of the M{sub BH} on average for ~5% (up to 10%).

RODOS database adapter

International Nuclear Information System (INIS)

Xie Gang

1995-11-01

Integrated data management is an essential aspect of many automatical information systems such as RODOS, a real-time on-line decision support system for nuclear emergency management. In particular, the application software must provide access management to different commercial database systems. This report presents the tools necessary for adapting embedded SQL-applications to both HP-ALLBASE/SQL and CA-Ingres/SQL databases. The design of the database adapter and the concept of RODOS embedded SQL syntax are discussed by considering some of the most important features of SQL-functions and the identification of significant differences between SQL-implementations. Finally fully part of the software developed and the administrator's and installation guides are described. (orig.) [de

Influencia de los parámetros de proceso, en el comportamiento del parámetro vibración absoluta en turbinas de vapor. // Influence of process parameters of the behaviour of absolute vibration parameters in steam turbine.

Directory of Open Access Journals (Sweden)

F. de la Torre Silva

2008-01-01

Full Text Available Este trabajo muestra el estudio realizado en turbinas de vapor de pequeña capacidad de generación de las centralestermoeléctricas cubanas, relacionadas con la influencia estadística entre parámetros de proceso de la turbina, respecto alparámetro vibración absoluta, medidos en las chumaceras de la turbina. Se utilizan las bases de datos de los sistemas demonitoreado on-line de la turbina. Se exponen las relaciones existentes entre los principales parámetros seleccionados paraeste estudio.Palabras claves: Monitorado on-line, Monitorado de la condición, Parámetros de proceso, Vibraciónabsoluta, Turbinas de vapor.______________________________________________________________________________AbstractThis work show the estudy in small steam turbine capacity of generation in cubans thermoelectric power station to relative withstatistical influence between steam process parameters regarding absolute vibration parameter, in the steam housing measurements.Themselves use database as steam on-line monitoring systems. Expose the existing relation between the principal selection parametersfor this study.Key Words: On.line monitoring, Condition monitoring, Process parameters, Absolute vibration, SteamTurbine.

Expanded beam spectro-ellipsometry for big area on-line monitoring

Science.gov (United States)

Fried, M.; Major, C.; Juhasz, G.; Petrik, P.; Horvath, Z.

2015-05-01

Non-destructive analysing tools are needed at all stages of thin film process-development, especially photovoltaic (PV) development, and on production lines. In the case of thin films, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity are important parameters. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels or big area (even 450 mm diameter) Si-wafers in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. Last years [M. Fried et al, Thin Solid Films 519, 2730 (2011)], a new instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl=350- 1000 nm) data. Earlier a single 30 point line image could be collected in 10 s over a 15 cm width of PV material. Recent years we have built a 30, a 45 and a 60 cm width expanded beam ellipsometer which speed is increased by 10x. Now, 1800 points can be mapped in a 1 min traverse of a 60*120 cm PV panel or flexible roll-to-roll substrate.

Chemical databases evaluated by order theoretical tools.

Science.gov (United States)

Voigt, Kristina; Brüggemann, Rainer; Pudenz, Stefan

2004-10-01

Data on environmental chemicals are urgently needed to comply with the future chemicals policy in the European Union. The availability of data on parameters and chemicals can be evaluated by chemometrical and environmetrical methods. Different mathematical and statistical methods are taken into account in this paper. The emphasis is set on a new, discrete mathematical method called METEOR (method of evaluation by order theory). Application of the Hasse diagram technique (HDT) of the complete data-matrix comprising 12 objects (databases) x 27 attributes (parameters + chemicals) reveals that ECOTOX (ECO), environmental fate database (EFD) and extoxnet (EXT)--also called multi-database databases--are best. Most single databases which are specialised are found in a minimal position in the Hasse diagram; these are biocatalysis/biodegradation database (BID), pesticide database (PES) and UmweltInfo (UMW). The aggregation of environmental parameters and chemicals (equal weight) leads to a slimmer data-matrix on the attribute side. However, no significant differences are found in the "best" and "worst" objects. The whole approach indicates a rather bad situation in terms of the availability of data on existing chemicals and hence an alarming signal concerning the new and existing chemicals policies of the EEC.

The AMMA database

Science.gov (United States)

Boichard, Jean-Luc; Brissebrat, Guillaume; Cloche, Sophie; Eymard, Laurence; Fleury, Laurence; Mastrorillo, Laurence; Moulaye, Oumarou; Ramage, Karim

2010-05-01

The AMMA project includes aircraft, ground-based and ocean measurements, an intensive use of satellite data and diverse modelling studies. Therefore, the AMMA database aims at storing a great amount and a large variety of data, and at providing the data as rapidly and safely as possible to the AMMA research community. In order to stimulate the exchange of information and collaboration between researchers from different disciplines or using different tools, the database provides a detailed description of the products and uses standardized formats. The AMMA database contains: - AMMA field campaigns datasets; - historical data in West Africa from 1850 (operational networks and previous scientific programs); - satellite products from past and future satellites, (re-)mapped on a regular latitude/longitude grid and stored in NetCDF format (CF Convention); - model outputs from atmosphere or ocean operational (re-)analysis and forecasts, and from research simulations. The outputs are processed as the satellite products are. Before accessing the data, any user has to sign the AMMA data and publication policy. This chart only covers the use of data in the framework of scientific objectives and categorically excludes the redistribution of data to third parties and the usage for commercial applications. Some collaboration between data producers and users, and the mention of the AMMA project in any publication is also required. The AMMA database and the associated on-line tools have been fully developed and are managed by two teams in France (IPSL Database Centre, Paris and OMP, Toulouse). Users can access data of both data centres using an unique web portal. This website is composed of different modules : - Registration: forms to register, read and sign the data use chart when an user visits for the first time - Data access interface: friendly tool allowing to build a data extraction request by selecting various criteria like location, time, parameters... The request can

Sensors for on-line monitoring of water chemistry parameters for NPP's

International Nuclear Information System (INIS)

Alltonen, P.; Maekelae, K.

1997-01-01

The on-line monitoring of the water chemistry parameters of aqueous solutions in nuclear power plants is considered essential to control corrosion phenomena. New sensors and electrodes that can be used under plant operating conditions are key components to the application of this technology. The research and development programs are running to develop practical instruments. The experimental capabilities available to research high temperature and pressure phenomena is growing rapidly. It is now possible to experimentally measure all information needed to make estimations and predictions concerning reactions taking place in the coolant of an operating reactor. However, further development of devices and practical experiences are needed to meet the requirement of power stations. (author). 8 refs, 8 figs

Mycobacteriophage genome database.

Science.gov (United States)

Joseph, Jerrine; Rajendran, Vasanthi; Hassan, Sameer; Kumar, Vanaja

2011-01-01

Mycobacteriophage genome database (MGDB) is an exclusive repository of the 64 completely sequenced mycobacteriophages with annotated information. It is a comprehensive compilation of the various gene parameters captured from several databases pooled together to empower mycobacteriophage researchers. The MGDB (Version No.1.0) comprises of 6086 genes from 64 mycobacteriophages classified into 72 families based on ACLAME database. Manual curation was aided by information available from public databases which was enriched further by analysis. Its web interface allows browsing as well as querying the classification. The main objective is to collect and organize the complexity inherent to mycobacteriophage protein classification in a rational way. The other objective is to browse the existing and new genomes and describe their functional annotation. The database is available for free at http://mpgdb.ibioinformatics.org/mpgdb.php.

Pair Identity and Smooth Variation Rules Applicable for the Spectroscopic Parameters of H2O Transitions Involving High-J States

Science.gov (United States)

Ma, Q.; Tipping, R. H.; Lavrentieva, N. N.

2010-01-01

Two basic rules (i.e. the pair identity and the smooth variation) applicable for H2O transitions involving high-J states have been discovered. The origins of these rules are the properties of the energy levels and wavefunctions of H2O states with the quantum number J above certain boundaries. As a result, for lines involving high-J states in individually defined groups, all their spectroscopic parameters (i.e. the transition wavenumber, intensity, pressure-broadened half-width, pressure-induced shift, and temperature exponent) must follow these rules. One can use these rules to screen spectroscopic data provided by databases and to identify possible errors. In addition, by using extrapolation methods within the individual groups, one is able to predict the spectroscopic parameters for lines in this group involving very high-J states. The latter are required in developing high-temperature molecular spectroscopic databases such as HITEMP.

Description of geological data in SKBs database GEOTAB

International Nuclear Information System (INIS)

Stark, T.

1988-01-01

Measurements for the characterization of geological, geophysical, hydrogeological and hydrochemical condition have been performed since 1977 in specific site investigation as well as for geoscientific projects. The database comprises four main groups of data volumes. These are: geological data, geophysical data, hydrogeological data, and hydrochemical data. In the database, background information from the investigations and results are stored on-line on the VAX 750, while raw data are either stored on-line or on magnetic tapes. This report deals with geological data and describes the dataflow from the measurements at the sites to the result tables in the database. All of the geological investigations were carried out by the Swedish Geological Survey, and since July 1982 by Swedish Geological Co, SGAB. The geological investigations have been divided into three categories, and each category is stored separately in the database. The are: surface factures, core mapping, and chemical analyses. At SGU/SGAB the geological data were stored on-line on-line on a PRIME 750 mini computer, on microcomputer floppy disks or in filed paper protocols. During 1987 the data files were transferred from SGAB to datafiles on the VAX computer. In the report the data flow of each of the three geological information categories are described separately. (L.E.)

COMPARISON OF PRODUCTION PARAMETERS BETWEEN THE FIRST GENERATION OF A-LINE IMPORTED AND BRED GILTS ON THE NUCLEUS FARM VELIKA BRANJEVINA

Directory of Open Access Journals (Sweden)

Dragica Dubravac

2013-06-01

Full Text Available Comparison of productive parameters of two analyzed groups (the first generation of imported gilts and the gilts born on the domestic farm was conducted on a nucleus farm that imported the gilt lines from the TOPIGS breeding program. For the purposes of the nucleus pig farm, TOPIGS gilts were imported from Netherlands. The nucleus farm where the analysis of the two groups’ productive parameters was conducted imported the ancestral and grandfather lines to produce the parenting generation TOPIGS 40 sows which are bred with a Pietrain line of boars. The TOPIGS 40 sow is an animal based on A-line and B-line characterized by high fertility rate, excellent maternal characteristics, good capacity for growth, and quality meaty body. The analysis of productive parameters of the two observed groups of gilts (the first generation of 105 imported gilts and 88 gilts born on the domestic farm resulted in significantly higher number of total born, born alive and weaned piglets after the first farrowing (P<0.001 as well as significantly higher number of total born and born alive piglets at third farrowing (P<0.05. The results of the observed qualities confirm the fact that, apart from the unquestionable genetic potential, other factors such as adaptation, accommodation conditions, microclimate, nutrition, and management have a significant effect on the increase of production results.

The GTN-P Data Management System: A central database for permafrost monitoring parameters of the Global Terrestrial Network for Permafrost (GTN-P) and beyond

Science.gov (United States)

Lanckman, Jean-Pierre; Elger, Kirsten; Karlsson, Ævar Karl; Johannsson, Halldór; Lantuit, Hugues

2013-04-01

Permafrost is a direct indicator of climate change and has been identified as Essential Climate Variable (ECV) by the global observing community. The monitoring of permafrost temperatures, active-layer thicknesses and other parameters has been performed for several decades already, but it was brought together within the Global Terrestrial Network for Permafrost (GTN-P) in the 1990's only, including the development of measurement protocols to provide standardized data. GTN-P is the primary international observing network for permafrost sponsored by the Global Climate Observing System (GCOS) and the Global Terrestrial Observing System (GTOS), and managed by the International Permafrost Association (IPA). All GTN-P data was outfitted with an "open data policy" with free data access via the World Wide Web. The existing data, however, is far from being homogeneous: it is not yet optimized for databases, there is no framework for data reporting or archival and data documentation is incomplete. As a result, and despite the utmost relevance of permafrost in the Earth's climate system, the data has not been used by as many researchers as intended by the initiators of the programs. While the monitoring of many other ECVs has been tackled by organized international networks (e.g. FLUXNET), there is still no central database for all permafrost-related parameters. The European Union project PAGE21 created opportunities to develop this central database for permafrost monitoring parameters of GTN-P during the duration of the project and beyond. The database aims to be the one location where the researcher can find data, metadata, and information of all relevant parameters for a specific site. Each component of the Data Management System (DMS), including parameters, data levels and metadata formats were developed in cooperation with the GTN-P and the IPA. The general framework of the GTN-P DMS is based on an object oriented model (OOM), open for as many parameters as possible, and

Fast determination of plasma parameters

International Nuclear Information System (INIS)

Wijnands, T.J.; Parlange, F.; Joffrin, E.

1995-01-01

Fast analysis of diagnostic signals of a tokamak discharge is demonstrated by using 4 fundamentally different techniques. A comparison between Function Parametrization (FP), Canonical Correlation Analysis (CCA) and a particular Neural Network (NN) configuration known as the Multi Layer Perceptron (MLP) is carried out, thereby taking a unique linear model based on a Singular Value Decomposition (SVD) as a reference. The various techniques provide all functional representations of characteristic plasma parameters in terms of the values of the measurements and are based on an analysis of a large, experimentally achieved database. A brief mathematical description of the various techniques is given, followed by two particular applications to Tore Supra diagnostic data. The first problem is concerned with the identification of the plasma boundary parameters using the poloidal field and differential poloidal flux measurements. A second application involves the interpretation of line integrated data from the multichannel interfero-polarimeter to obtain the central value of the safety factor. (author) 4 refs.; 3 figs

Development of database on the distribution coefficient. 2. Preparation of database

Energy Technology Data Exchange (ETDEWEB)

Takebe, Shinichi; Abe, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

The distribution coefficient is very important parameter for environmental impact assessment on the disposal of radioactive waste arising from research institutes. 'Database on the Distribution Coefficient' was built up from the informations which were obtained by the literature survey in the country for these various items such as value , measuring method and measurement condition of distribution coefficient, in order to select the reasonable distribution coefficient value on the utilization of this value in the safety evaluation. This report was explained about the outline on preparation of this database and was summarized as a use guide book of database. (author)

Development of database on the distribution coefficient. 2. Preparation of database

Energy Technology Data Exchange (ETDEWEB)

Takebe, Shinichi; Abe, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

The distribution coefficient is very important parameter for environmental impact assessment on the disposal of radioactive waste arising from research institutes. 'Database on the Distribution Coefficient' was built up from the informations which were obtained by the literature survey in the country for these various items such as value , measuring method and measurement condition of distribution coefficient, in order to select the reasonable distribution coefficient value on the utilization of this value in the safety evaluation. This report was explained about the outline on preparation of this database and was summarized as a use guide book of database. (author)

Development of a Laboratory Synchrophasor Network and an Application to Estimate Transmission Line Parameters in Real Time

Science.gov (United States)

Almiron Bonnin, Rubens Eduardo

The development of an experimental synchrophasors network and application of synchrophasors for real-time transmission line parameter monitoring are presented in this thesis. In the laboratory setup, a power system is simulated in a RTDS real-time digital simulator, and the simulated voltages and currents are input to hardware phasor measurement units (PMUs) through the analog outputs of the simulator. Time synchronizing signals for the PMU devices are supplied from a common GPS clock. The real time data collected from PMUs are sent to a phasor data concentrator (PDC) through Ethernet using the TCP/IP protocol. A real-time transmission line parameter monitoring application program that uses the synchrophasor data provided by the PDC is implemented and validated. The experimental synchrophasor network developed in this thesis is expected to be used in research on synchrophasor applications as well as in graduate and undergraduate teaching.

Canadian database for radionuclide transfer in the environment

Energy Technology Data Exchange (ETDEWEB)

Sheppard, S C; Corbett, B J [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.

1995-04-01

The transfer of radionuclides throughout the biosphere is described in models that rely on a series of transfer parameters. These parameters are typically based on experimental or monitoring observations, and describe processes such as soil-to-plant transfer, soil-to-atmosphere transfer, and water-to-fish transfer. The parameters values used in many applications to date have come from around the world. However, data from Canadian settings are generally preferable for Canadian safety assessment applications. This is particularly true for geographically unique parameters relating to specific soils and environments. This database was constructed to record future radionuclide transfer parameter data systematically and completely, and to record particularly valuable existing data. The database supports element-specific parameters. Because the emphasis is on Canadian data, the data are indexed by geographic and physiographic region. In addition to the specific transfer parameter values, there is provision for a substantial amount of ancillary data. The database now operates with dBase software. (author). 1 tab.

Canadian database for radionuclide transfer in the environment

International Nuclear Information System (INIS)

Sheppard, S.C.; Corbett, B.J.

1995-04-01

The transfer of radionuclides throughout the biosphere is described in models that rely on a series of transfer parameters. These parameters are typically based on experimental or monitoring observations, and describe processes such as soil-to-plant transfer, soil-to-atmosphere transfer, and water-to-fish transfer. The parameters values used in many applications to date have come from around the world. However, data from Canadian settings are generally preferable for Canadian safety assessment applications. This is particularly true for geographically unique parameters relating to specific soils and environments. This database was constructed to record future radionuclide transfer parameter data systematically and completely, and to record particularly valuable existing data. The database supports element-specific parameters. Because the emphasis is on Canadian data, the data are indexed by geographic and physiographic region. In addition to the specific transfer parameter values, there is provision for a substantial amount of ancillary data. The database now operates with dBase software. (author). 1 tab

Vehicle Dynamic Prediction Systems with On-Line Identification of Vehicle Parameters and Road Conditions

Science.gov (United States)

Hsu, Ling-Yuan; Chen, Tsung-Lin

2012-01-01

This paper presents a vehicle dynamics prediction system, which consists of a sensor fusion system and a vehicle parameter identification system. This sensor fusion system can obtain the six degree-of-freedom vehicle dynamics and two road angles without using a vehicle model. The vehicle parameter identification system uses the vehicle dynamics from the sensor fusion system to identify ten vehicle parameters in real time, including vehicle mass, moment of inertial, and road friction coefficients. With above two systems, the future vehicle dynamics is predicted by using a vehicle dynamics model, obtained from the parameter identification system, to propagate with time the current vehicle state values, obtained from the sensor fusion system. Comparing with most existing literatures in this field, the proposed approach improves the prediction accuracy both by incorporating more vehicle dynamics to the prediction system and by on-line identification to minimize the vehicle modeling errors. Simulation results show that the proposed method successfully predicts the vehicle dynamics in a left-hand turn event and a rollover event. The prediction inaccuracy is 0.51% in a left-hand turn event and 27.3% in a rollover event. PMID:23202231

Critical parameters affecting the design of high frequency transmission lines in standard CMOS technology

KAUST Repository

Al Attar, Talal; Alshehri, Abdullah; Almansouri, Abdullah Saud Mohammed; Al-Turki, Abdullah Turki

2017-01-01

Different structures of transmission lines were designed and fabricated in standard CMOS technology to estimate some critical parameters including the RMS value of the surface roughness and the loss tangent. The input impedances for frequencies up to 50 GHz were modeled and compared with measurements. The results demonstrated a strong correlation between the used model with the proposed coefficients and the measured results, attesting the robustness of the model and the reliability of the incorporated coefficients values.

Critical parameters affecting the design of high frequency transmission lines in standard CMOS technology

KAUST Repository

Al Attar, Talal

2017-05-13

Different structures of transmission lines were designed and fabricated in standard CMOS technology to estimate some critical parameters including the RMS value of the surface roughness and the loss tangent. The input impedances for frequencies up to 50 GHz were modeled and compared with measurements. The results demonstrated a strong correlation between the used model with the proposed coefficients and the measured results, attesting the robustness of the model and the reliability of the incorporated coefficients values.

Variations of immune parameters in the lined seahorse Hippocampus erectus after infection with enteritis pathogen of Vibrio parahaemolyticus.

Science.gov (United States)

Lin, Tingting; Zhang, Dong; Liu, Xin; Xiao, Dongxue

2016-03-01

Enteritis has been increasingly recognized as one of the major obstacles for the lined seahorse Hippocampus erectus mass culture success. In the present study, the intestinal bacteria strains of the lined seahorses H. erectus suffered from enteritis were isolated, then their pathogenicities were confirmed by artificial infection, and one pathogenic bacteria strain named DS3 was obtained. The median lethal dose (LD50) of strain DS3 for 10 days was determined. The seahorses with different infection levels of uninfected (control), early stage of infection (ESI) and late stage of infection (LSI) were respectively sampled at 0, 3, 6 and 9 days post infection, and 12 immune parameters in the plasma were analyzed. The strain DS3 identified with a biochemical test combined with a molecular method was Vibrio parahaemolyticus, and its LD50 for 10 days was 1.3 × 10(3) cfu/fish. Six parameters including monocytes/leucocytes, leucocytes phagocytic rate, interleukin-2, interferon-α, lysozyme and immunoglobulin M exhibited a generally similar variation trend: highest in the control, second in the ESI and lowest in the LSI throughout the entire experiment. In view of the infection level of V. parahaemolyticus to H. erectus is largely decided by the seahorse's own immune capacity, therefore, these immune parameters were high in the non- or slightly infected seahorses, and low in the severely infected individuals may be an indicator for immune level. These immune parameters may be reliable indicators for the juvenile and broodstock quality assessment. Moreover, clarification of the enteritis pathogen also provides guidances for targeted medicine choice for the lined seahorse. Copyright © 2016 Elsevier Ltd. All rights reserved.

Efficacy of Second-line Targeted Therapy for Renal Cell Carcinoma According to Change from Baseline in International Metastatic Renal Cell Carcinoma Database Consortium Prognostic Category

DEFF Research Database (Denmark)

Davis, Ian D; Xie, Wanling; Pezaro, Carmel

2017-01-01

BACKGROUND: We hypothesized that changes in International Metastatic Renal Cell Carcinoma Database Consortium (IMDC) prognostic category at start of second-line therapy (2L) for metastatic renal cell carcinoma (mRCC) might predict response. OBJECTIVE: To assess outcomes of 2L according to type...... of therapy and change in IMDC prognostic category. DESIGN, SETTING, AND PARTICIPANTS: We performed a retrospective review of the IMDC database for mRCC patients who received first-line (1L) VEGF inhibitors (VEGFi) and then 2L with VEGFi or mTOR inhibitors (mTORi). IMDC prognostic categories were defined......% confidence interval [CI] 12.0-19.0 for VEGFi; 20.2 mo, 95% CI 14.3-26.1 for mTORi; AHR 1.53, 95% CI 1.04-2.24; adjusted p=0.03). CONCLUSIONS: Changes in IMDC prognostic category predict the subsequent clinical course for patients with mRCC and provide a rational basis for selection of subsequent therapy...

Radiobiological parameters of a human tumor parent line and four tumor clones of a human epidermoid carcinoma

International Nuclear Information System (INIS)

Weichselbaum, R.R.; Beckett, M.; Dahlberg, W.

1987-01-01

The authors examined the radiobiological parameters of a parent tumor line and four tumor clones of a human squamous cell carcinoma of the skin. The parent line and clones have a tumor morphology, aneuploid karyotype, and the ability to passage continuously in vitro. With the exception of clone F2A, all cell lines form tumors in nude mice. The parent line, SCC-12 has a D/sub o/ of 154 and an n 7.5 In four tumor clones, D/sub o/ ranges from 131 (clone V) to 266 (clone B2); n ranges from 22.8 in clone V to 2.1 in clone B2. PLDR following 1100 rad ranges from 1.7 in clone B2 to 13.1 in clone V. However, PLDR following equitoxic doses of radiation is similar in the parent and all sub-clones. Radiobiological heterogeneity may complicate predictive assays for clinical radiotherapy

DIII-D edge physics database

International Nuclear Information System (INIS)

Jong, R.A.; Porter, G.D.; Hill, D.N.; Buchenauer, D.A.; Bramson, G.

1992-03-01

We have developed an edge-physics database containing data for the plasma in the divertor region and the scrape-off layer (SOL) for the DIII-D tokamak. The database provides many of the parameters necessary to model the power flow to the divertor and other plasma processes in the plasma edge. It will also facilitate the analysis of DIII-D data for comparison with other divertor tokamaks. In addition to the core plasma parameters, edge-specific data are included in this database. Initial results using the database show good agreement between the pressure profiles measured by the Langmuir probes and those determined from the Thomson data for the inner strike point, but not for the outer strike point region. We also find that the ratio of separatrix density to average core density, as well as the in/out asymmetry in the SOL power at the divertor in DIII-D do not agree with values currently assumed in modeling the International Thermonuclear Experimental Reactor (ITER)

Line shape parameters for the H2O-H2 collision system for application to exoplanet and planetary atmospheres

Science.gov (United States)

Renaud, Candice L.; Cleghorn, Kara; Hartmann, Léna; Vispoel, Bastien; Gamache, Robert R.

2018-05-01

Water can be detected throughout the universe: in comets, asteroids, dwarf planets, the inner and outer planets in our solar system, cool stars, brown dwarfs, and on many exoplanets. Here the focus is on locations rich in hydrogen gas. To properly study these environments, there is a need for the line shape parameters for H2O transitions in collision with hydrogen. This work presents calculations of the half-width and line shift, made using the Modified Complex Robert-Bonamy (MCRB) formalism, at a number of temperatures. It is shown that this collision system is strongly off-resonance. For such conditions, the atom-atom part of the intermolecular potential dominates the interaction of the radiating and perturbing molecules. The atom-atom parameters were adjusted by fitting the H2O-H2 measurements of Brown and Plymate (1996). Several techniques were used to extract lines for which there is more confidence in the quality of the data. The final potential yields results that agree with the measurements with ∼0.3% difference and a 5.9% standard deviation. Using this potential, MCRB calculations were made for all transitions in the pure rotation, ν2, ν1, and ν3 bands. The structure of the line shape parameters and the temperature dependence of the half-width, as a function of the rotational and vibrational quantum numbers, are discussed. It is shown that the power law model of the T-dependence of the half-width is inadequate over large temperature ranges.

Sting_RDB: a relational database of structural parameters for protein analysis with support for data warehousing and data mining.

Science.gov (United States)

Oliveira, S R M; Almeida, G V; Souza, K R R; Rodrigues, D N; Kuser-Falcão, P R; Yamagishi, M E B; Santos, E H; Vieira, F D; Jardine, J G; Neshich, G

2007-10-05

An effective strategy for managing protein databases is to provide mechanisms to transform raw data into consistent, accurate and reliable information. Such mechanisms will greatly reduce operational inefficiencies and improve one's ability to better handle scientific objectives and interpret the research results. To achieve this challenging goal for the STING project, we introduce Sting_RDB, a relational database of structural parameters for protein analysis with support for data warehousing and data mining. In this article, we highlight the main features of Sting_RDB and show how a user can explore it for efficient and biologically relevant queries. Considering its importance for molecular biologists, effort has been made to advance Sting_RDB toward data quality assessment. To the best of our knowledge, Sting_RDB is one of the most comprehensive data repositories for protein analysis, now also capable of providing its users with a data quality indicator. This paper differs from our previous study in many aspects. First, we introduce Sting_RDB, a relational database with mechanisms for efficient and relevant queries using SQL. Sting_rdb evolved from the earlier, text (flat file)-based database, in which data consistency and integrity was not guaranteed. Second, we provide support for data warehousing and mining. Third, the data quality indicator was introduced. Finally and probably most importantly, complex queries that could not be posed on a text-based database, are now easily implemented. Further details are accessible at the Sting_RDB demo web page: http://www.cbi.cnptia.embrapa.br/StingRDB.

Control of operating parameters of laser ceilometers with the application of fiber optic delay line imitation

Science.gov (United States)

Kim, A. A.; Klochkov, D. V.; Konyaev, M. A.; Mihaylenko, A. S.

2017-11-01

The article considers the problem of control and verification of the laser ceilometers basic performance parameters and describes an alternative method based on the use of multi-length fiber optic delay line, simulating atmospheric track. The results of the described experiment demonstrate the great potential of this method for inspection and verification procedures of laser ceilometers.

ECOS - analysis of sensitivity to database and input parameters

International Nuclear Information System (INIS)

Sumerling, T.J.; Jones, C.H.

1986-06-01

The sensitivity of doses calculated by the generic biosphere code ECOS to parameter changes has been investigated by the authors for the Department of the Environment as part of its radioactive waste management research programme. The sensitivity of results to radionuclide dependent parameters has been tested by specifying reasonable parameter ranges and performing code runs for best estimate, upper-bound and lower-bound parameter values. The work indicates that doses are most sensitive to scenario parameters: geosphere input fractions, area of contaminated land, land use and diet, flux of contaminated waters and water use. Recommendations are made based on the results of sensitivity. (author)

A database for on-line event analysis on a distributed memory machine

CERN Document Server

Argante, E; Van der Stok, P D V; Willers, Ian Malcolm

1995-01-01

Parallel in-memory databases can enhance the structuring and parallelization of programs used in High Energy Physics (HEP). Efficient database access routines are used as communication primitives which hide the communication topology in contrast to the more explicit communications like PVM or MPI. A parallel in-memory database, called SPIDER, has been implemented on a 32 node Meiko CS-2 distributed memory machine. The spider primitives generate a lower overhead than the one generated by PVM or PMI. The event reconstruction program, CPREAD of the CPLEAR experiment, has been used as a test case. Performance measurerate generated by CPLEAR.

Sensors for on-line monitoring of water chemistry parameters for NPP`s

Energy Technology Data Exchange (ETDEWEB)

Alltonen, P; Maekelae, K [Technical Research Centre of Finland, Espoo (Finland)

1997-02-01

The on-line monitoring of the water chemistry parameters of aqueous solutions in nuclear power plants is considered essential to control corrosion phenomena. New sensors and electrodes that can be used under plant operating conditions are key components to the application of this technology. The research and development programs are running to develop practical instruments. The experimental capabilities available to research high temperature and pressure phenomena is growing rapidly. It is now possible to experimentally measure all information needed to make estimations and predictions concerning reactions taking place in the coolant of an operating reactor. However, further development of devices and practical experiences are needed to meet the requirement of power stations. (author). 8 refs, 8 figs.

The LHCb configuration database

CERN Document Server

Abadie, Lana; Gaspar, Clara; Jacobsson, Richard; Jost, Beat; Neufeld, Niko

2005-01-01

The Experiment Control System (ECS) will handle the monitoring, configuration and operation of all the LHCb experimental equipment. All parameters required to configure electronics equipment under the control of the ECS will reside in a configuration database. The database will contain two kinds of information: 1.\tConfiguration properties about devices such as hardware addresses, geographical location, and operational parameters associated with particular running modes (dynamic properties). 2.\tConnectivity between devices : this consists of describing the output and input connections of a device (static properties). The representation of these data using tables must be complete so that it can provide all the required information to the ECS and must cater for all the subsystems. The design should also guarantee a fast response time, even if a query results in a large volume of data being loaded from the database into the ECS. To fulfil these constraints, we apply the following methodology: Determine from the d...

Evolution of the Configuration Database Design

International Nuclear Information System (INIS)

Salnikov, A.

2006-01-01

The BABAR experiment at SLAC successfully collects physics data since 1999. One of the major parts of its on-line system is the configuration database which provides other parts of the system with the configuration data necessary for data taking. Originally the configuration database was implemented in the Objectivity/DB ODBMS. Recently BABAR performed a successful migration of its event store from Objectivity/DB to ROOT and this prompted a complete phase-out of the Objectivity/DB in all other BABAR databases. It required the complete redesign of the configuration database to hide any implementation details and to support multiple storage technologies. In this paper we describe the process of the migration of the configuration database, its new design, implementation strategy and details

Development of a Probabilistic Technique for On-line Parameter and State Estimation in Non-linear Dynamic Systems

International Nuclear Information System (INIS)

Tunc Aldemir; Miller, Don W.; Hajek, Brian K.; Peng Wang

2002-01-01

The DSD (Dynamic System Doctor) is a system-independent, interactive software under development for on-line state/parameter estimation in dynamic systems (1), partially supported through a Nuclear Engineering Education (NEER) grant during 1998-2001. This paper summarizes the recent accomplishments in improving the user-friendliness and computational capability of DSD

Zebrafish Database: Customizable, Free, and Open-Source Solution for Facility Management.

Science.gov (United States)

Yakulov, Toma Antonov; Walz, Gerd

2015-12-01

Zebrafish Database is a web-based customizable database solution, which can be easily adapted to serve both single laboratories and facilities housing thousands of zebrafish lines. The database allows the users to keep track of details regarding the various genomic features, zebrafish lines, zebrafish batches, and their respective locations. Advanced search and reporting options are available. Unique features are the ability to upload files and images that are associated with the respective records and an integrated calendar component that supports multiple calendars and categories. Built on the basis of the Joomla content management system, the Zebrafish Database is easily extendable without the need for advanced programming skills.

Presentation layer finding database of cyanobacteria and algae

OpenAIRE

SEMECKÝ, Jiří

2012-01-01

Phycological Laboratory University of South Bohemia in Czech Budejovice uses occurrence database samples. This work deals with the analysis and optimization of the existing database, designing and programming extension that allows processing points based on GPS coordinates and display them in on-line maps and georeferenced image.

Detecting differences in some elite wheat lines for salt tolerance through multi parameters evaluation i. morphological and yield parameters

International Nuclear Information System (INIS)

Akram, M.; Afzal, M.; Ashraf, M.

2011-01-01

Salt tolerance potential of a newly developed wheat genotype (N-9760: V3) was assessed by comparing it with a known salt tolerant line (N-1073:V2) and a commercial cultivar (Inqlab: V1) using various growth parameters measured at the vegetative and maturity stages, The objectives were to know qualitative and quantitative tolerance status and possible utilization of the new genotype as well as to examine as to whether the parameters used to assess the tolerance at vegetative and maturity stages are affected differentially by various salinity levels. The experiment was conducted in pots using four salinity levels (EC 1.5, 5, 10 and 15 dS m/sup -1/). Root and shoot length, root and shoot fresh and dry weight, number of leaves and leaf area were recorded at the vegetative stage, while plant height, number of tillers, spike length and grain yield plant/sup -1/ were recorded at the maturity stage. Fresh weight of shoots, fresh and dry weights of roots, plant height, number of productive tillers and grain yield were least affected in V3 while shoot length, shoot fresh weight, number of leaves, leaf area and spike length were least affected in V2 by EC 15 dS m/sup -1/. Both genotypes appeared tolerant but all the parameters studied at both stages were affected differentially by salinity levels and genotypes hence, testing of every new genotype appeared essential. (author)

Modification of the U-line of the RHIC injection line

International Nuclear Information System (INIS)

Xu, Jianming.

1991-09-01

The parameters of the U-line of the RHIC injection line with low β waist are described. In that lattice, the location of SA is not dispersion free and 14 quadrupoles are needed. This line has been modified to move SA to a dispersion free region (after the 8-degree bend), the length and maximum gradient of quadrupoles have been adjusted to fit the existing quadrupole parameters and the number of quadrupoles is reduced to 12. 2 refs., 3 tabs

'PSA-SPN' - A Parameter Sensitivity Analysis Method Using Stochastic Petri Nets: Application to a Production Line System

International Nuclear Information System (INIS)

Labadi, Karim; Saggadi, Samira; Amodeo, Lionel

2009-01-01

The dynamic behavior of a discrete event dynamic system can be significantly affected for some uncertain changes in its decision parameters. So, parameter sensitivity analysis would be a useful way in studying the effects of these changes on the system performance. In the past, the sensitivity analysis approaches are frequently based on simulation models. In recent years, formal methods based on stochastic process including Markov process are proposed in the literature. In this paper, we are interested in the parameter sensitivity analysis of discrete event dynamic systems by using stochastic Petri nets models as a tool for modelling and performance evaluation. A sensitivity analysis approach based on stochastic Petri nets, called PSA-SPN method, will be proposed with an application to a production line system.

Cell Line Data Base: structure and recent improvements towards molecular authentication of human cell lines.

Science.gov (United States)

Romano, Paolo; Manniello, Assunta; Aresu, Ottavia; Armento, Massimiliano; Cesaro, Michela; Parodi, Barbara

2009-01-01

The Cell Line Data Base (CLDB) is a well-known reference information source on human and animal cell lines including information on more than 6000 cell lines. Main biological features are coded according to controlled vocabularies derived from international lists and taxonomies. HyperCLDB (http://bioinformatics.istge.it/hypercldb/) is a hypertext version of CLDB that improves data accessibility by also allowing information retrieval through web spiders. Access to HyperCLDB is provided through indexes of biological characteristics and navigation in the hypertext is granted by many internal links. HyperCLDB also includes links to external resources. Recently, an interest was raised for a reference nomenclature for cell lines and CLDB was seen as an authoritative system. Furthermore, to overcome the cell line misidentification problem, molecular authentication methods, such as fingerprinting, single-locus short tandem repeat (STR) profile and single nucleotide polymorphisms validation, were proposed. Since this data is distributed, a reference portal on authentication of human cell lines is needed. We present here the architecture and contents of CLDB, its recent enhancements and perspectives. We also present a new related database, the Cell Line Integrated Molecular Authentication (CLIMA) database (http://bioinformatics.istge.it/clima/), that allows to link authentication data to actual cell lines.

Stark Broadening Parameters for Neutral Oxygen Spectral Lines

Indian Academy of Sciences (India)

fundamental state; its fundamental configuration is 2s22p4 and is subdivided into 3 even terms: 3P ... μ the reduced mass of the system atom-perturber). Recently ... where We(VALD) are the widths taken from the VALD database for T = 10000.

DOE Order 5480.28 Hanford facilities database

Energy Technology Data Exchange (ETDEWEB)

Hayenga, J.L., Westinghouse Hanford

1996-09-01

This document describes the development of a database of DOE and/or leased Hanford Site Facilities. The completed database will consist of structure/facility parameters essential to the prioritization of these structures for natural phenomena hazard vulnerability in compliance with DOE Order 5480.28, `Natural Phenomena Hazards Mitigation`. The prioritization process will be based upon the structure/facility vulnerability to natural phenomena hazards. The ACCESS based database, `Hanford Facilities Site Database`, is generated from current Hanford Site information and databases.

At-line monitoring of key parameters of nisin fermentation by near infrared spectroscopy, chemometric modeling and model improvement.

Science.gov (United States)

Guo, Wei-Liang; Du, Yi-Ping; Zhou, Yong-Can; Yang, Shuang; Lu, Jia-Hui; Zhao, Hong-Yu; Wang, Yao; Teng, Li-Rong

2012-03-01

An analytical procedure has been developed for at-line (fast off-line) monitoring of 4 key parameters including nisin titer (NT), the concentration of reducing sugars, cell concentration and pH during a nisin fermentation process. This procedure is based on near infrared (NIR) spectroscopy and Partial Least Squares (PLS). Samples without any preprocessing were collected at intervals of 1 h during fifteen batch of fermentations. These fermentation processes were implemented in 3 different 5 l fermentors at various conditions. NIR spectra of the samples were collected in 10 min. And then, PLS was used for modeling the relationship between NIR spectra and the key parameters which were determined by reference methods. Monte Carlo Partial Least Squares (MCPLS) was applied to identify the outliers and select the most efficacious methods for preprocessing spectra, wavelengths and the suitable number of latent variables (n (LV)). Then, the optimum models for determining NT, concentration of reducing sugars, cell concentration and pH were established. The correlation coefficients of calibration set (R (c)) were 0.8255, 0.9000, 0.9883 and 0.9581, respectively. These results demonstrated that this method can be successfully applied to at-line monitor of NT, concentration of reducing sugars, cell concentration and pH during nisin fermentation processes.

SELECTED PARAMETERS OF THE WORK OF SPEED LIMITER IN LINE STRAINING SYSTEM IN A FRICTIONAL LIFT

Directory of Open Access Journals (Sweden)

Paweł Lonkwic

2014-03-01

Full Text Available The article presents the analysis of selected work parameters of speed limiter in line straining system. We analyzed the effect of changing the geometrical conditions of the new solution for the speed limiter in line straining system upon the working conditions in frictional lift braking system. Within the conducted simulations of the work of the system, which is responsible for lift braking with a tension with spring, a test bed was prepared, which simulated the work of tension-rope-limiter system. The tests were performed in the conditions reflecting the work of a lifting appliance. Analyzing the results obtained through empirical calculations, we can conclude that there is a possibility of applying the spring to eliminate the weight.

The FTS atomic spectrum tool (FAST) for rapid analysis of line spectra

Science.gov (United States)

Ruffoni, M. P.

2013-07-01

them to calculated data (such as from the Kurucz database [1]), predicted line parameters, and/or previously known experimental results. With additional information on the spectral response of the spectrometer, obtained from a calibrated standard light source, FT spectra may be intensity calibrated. In turn, this permits the user to calculate atomic branching fractions and oscillator strengths, and their respective uncertainties. Running time: Open ended. Defined by the user. References: [1] R.L. Kurucz (2007). URL http://kurucz.harvard.edu/atoms/.

[Study on the Effects and Compensation Effect of Recording Parameters Error on Imaging Performance of Holographic Grating in On-Line Spectral Diagnose].

Science.gov (United States)

Jiang, Yan-xiu; Bayanheshig; Yang, Shuo; Zhao, Xu-long; Wu, Na; Li, Wen-hao

2016-03-01

To making the high resolution grating, a numerical calculation was used to analyze the effect of recording parameters on groove density, focal curve and imaging performance of the grating and their compensation. Based on Fermat' s principle, light path function and aberration, the effect on imaging performance of the grating was analyzed. In the case of fixed using parameters, the error of the recording angle has a greater influence on imaging performance, therefore the gain of the weight of recording angle can improve the accuracy of the recording angle values in the optimization; recording distance has little influence on imaging performance; the relative errors of recording parameters cause the change of imaging performance of the grating; the results indicate that recording parameter errors can be compensated by adjusting its corresponding parameter. The study can give theoretical guidance to the fabrication for high resolution varied-line-space plane holographic grating in on-line spectral diagnostic and reduce the alignment difficulty by analyze the main error effect the imaging performance and propose the compensation method.

Liquid metals. Coexistence line, critical parameters, compressibility

International Nuclear Information System (INIS)

Filippov, L.P.

1986-01-01

Formulae to calculate four characteristic parameters of liquid metals (density, compressibility, critical temperature and individual parameter) according to four initial data are obtained: two values of vapor density and two values of vapor pressure. Comparison between experimental and calculation results are presented for liquid Cs, Na, Li, K, Rb

Development of the sorption and diffusion database system for safety assessment of geological disposal

International Nuclear Information System (INIS)

Tachi, Yukio; Tochigi, Yoshikatsu; Suyama, Tadahiro; Saito, Yoshihiko; Yui, Mikazu; Ochs, Michael

2009-02-01

Japan Atomic Energy Agency (JAEA) has been developing databases of sorption and diffusion parameters in buffer material (bentonite) and rock, which are key parameters for safety assessment of the geological disposal. These sorption and diffusion databases (SDB/DDB) have been firstly developed as an important basis for the H12 performance assessment (PA) of high-level radioactive waste disposal in Japan, and have been provided through the Web. JAEA has been and is continuing to improve and update the SDB/DDB in view of potential future data needs, focusing on assuring the desired quality level and testing the usefulness of the existing databases for possible applications to parameter-setting for the deep geological environment. The new web-based sorption and diffusion database system (JAEA-SDB/DDB) has been developed to utilize quality assuring procedure and to allow effective application for parameter setting, by adding the following functions to the existing database; - consistency and linkage between sorption and diffusion database - effective utilization of quality assuring (QA) guideline and categolized QA data - additional function for estimating of parameters and graphing of relation between parameters - counting and summarizing function for effective access to respective data for parameter setting. In the present report, practical examples were illustrated regarding the applicability of the database system to the parameter setting by using additional functions such as QA information and data estimation. This database system is expected to make it possible to obtain quick overview of the available data from the database, and to have suitable access to the respective data for parameter-setting for performance assessment and parameter-deriving for mechanistic modeling in traceable and transparent manner. (author)

GenoMycDB: a database for comparative analysis of mycobacterial genes and genomes.

Science.gov (United States)

Catanho, Marcos; Mascarenhas, Daniel; Degrave, Wim; Miranda, Antonio Basílio de

2006-03-31

Several databases and computational tools have been created with the aim of organizing, integrating and analyzing the wealth of information generated by large-scale sequencing projects of mycobacterial genomes and those of other organisms. However, with very few exceptions, these databases and tools do not allow for massive and/or dynamic comparison of these data. GenoMycDB (http://www.dbbm.fiocruz.br/GenoMycDB) is a relational database built for large-scale comparative analyses of completely sequenced mycobacterial genomes, based on their predicted protein content. Its central structure is composed of the results obtained after pair-wise sequence alignments among all the predicted proteins coded by the genomes of six mycobacteria: Mycobacterium tuberculosis (strains H37Rv and CDC1551), M. bovis AF2122/97, M. avium subsp. paratuberculosis K10, M. leprae TN, and M. smegmatis MC2 155. The database stores the computed similarity parameters of every aligned pair, providing for each protein sequence the predicted subcellular localization, the assigned cluster of orthologous groups, the features of the corresponding gene, and links to several important databases. Tables containing pairs or groups of potential homologs between selected species/strains can be produced dynamically by user-defined criteria, based on one or multiple sequence similarity parameters. In addition, searches can be restricted according to the predicted subcellular localization of the protein, the DNA strand of the corresponding gene and/or the description of the protein. Massive data search and/or retrieval are available, and different ways of exporting the result are offered. GenoMycDB provides an on-line resource for the functional classification of mycobacterial proteins as well as for the analysis of genome structure, organization, and evolution.

Determination of foreign broadening coefficients for Methane Lines Targeted by the Tunable Laser Spectrometer (TLS) on the Mars Curiosity Rover

International Nuclear Information System (INIS)

Manne, Jagadeeshwari; Bui, Thinh Q.; Webster, Christopher R.

2017-01-01

Molecular line parameters of foreign- broadening by air, carbon dioxide, and helium gas have been experimentally determined for infrared ro-vibrational spectral lines of methane isotopologues ("1"2CH_4 and "1"3CH_4) at 3057 cm"−"1 targeted by the Tunable Laser Spectrometer (TLS) in the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) Curiosity rover. From multi-spectrum analyses with the speed-dependent Voigt line profile with Rosenkrantz line-mixing, speed-dependence and line-mixing effects were quantified for methane spectra at total pressures up to 200 mbar. The fitted air-broadening coefficients deviated from 8–25% to those reported in the HITRAN-2012 database. - Highlights: • Measurements of foreign broadening coefficients for Mars-TLS specific methane lines. • Spectral parameters were deduced from Speed-dependent Voigt profile with line mixing effects taken into account. • A thorough comparison of different line profile fits for the Mars-TLS methane lines. The fitted broadening coefficients and areas deviated up to 30% and 4%, respectively, when comparing the speed-dependent Voigt profile (with Rosenkrantz line-mixing) with the simplest Voigt profile. • Foreign broadening coefficients were measured within a precision of 2.2%.

Comparison of growth performance and immune parameters of three commercial chicken lines used in organic production.

Science.gov (United States)

Kjærup, R B; Juul-Madsen, H R; Norup, L R; Sørensen, P; Dalgaard, T S

2017-05-01

Owing to the higher demands for avoiding medication and antibiotics, health status of the production animals plays an important role in the poultry industry, especially in organic poultry systems. Immunity plays a major role in keeping the host free from disease, and it is evident that the host's genetic make-up influences immunity and disease resistance/susceptibility in chickens. Previously, breeding strategies aimed at selection for resistance against specific diseases with the risk of creating less disease resistance against other pathogens. Changing breeding strategies towards selection of chickens with a more general and broad disease resistance or robustness may therefore improve the overall health status, animal welfare, and food security in the poultry production. The aim of this study was therefore to compare the immunocompetence of the presumed "robust" Hellevad chickens with two chicken lines widely used in organic production, Bovans Brown (Bovans) and Hisex White (Hisex). The chickens were subjected to a routine vaccination program comprising one parasite and four viral vaccines. The current study indicates that considerable differences in immunocompetence may exist between commercial layer lines used in organic production. The Hellevad chickens were found to have higher body weight at the end of the experiment (17 weeks of age) than the other two lines. Furthermore, Hellevad and Hisex chickens were found to have higher levels of humoral innate immunity with regard to sample to positive ratio of natural antibodies in serum and concentration of mannose-binding lectin in serum as compared to Bovans. Moreover, indications of an inflammatory response were observed in the Bovans at week 5, corresponding to 1 week after vaccination with live infectious bursal disease virus. With regard to adaptive immune parameters such as IgY concentration in blood and infectious bursal disease virus (IBDV)-specific antibody titres, the Hellevad and Hisex chickens had lower

Database Constraints Applied to Metabolic Pathway Reconstruction Tools

Directory of Open Access Journals (Sweden)

Jordi Vilaplana

2014-01-01

Full Text Available Our group developed two biological applications, Biblio-MetReS and Homol-MetReS, accessing the same database of organisms with annotated genes. Biblio-MetReS is a data-mining application that facilitates the reconstruction of molecular networks based on automated text-mining analysis of published scientific literature. Homol-MetReS allows functional (reannotation of proteomes, to properly identify both the individual proteins involved in the process(es of interest and their function. It also enables the sets of proteins involved in the process(es in different organisms to be compared directly. The efficiency of these biological applications is directly related to the design of the shared database. We classified and analyzed the different kinds of access to the database. Based on this study, we tried to adjust and tune the configurable parameters of the database server to reach the best performance of the communication data link to/from the database system. Different database technologies were analyzed. We started the study with a public relational SQL database, MySQL. Then, the same database was implemented by a MapReduce-based database named HBase. The results indicated that the standard configuration of MySQL gives an acceptable performance for low or medium size databases. Nevertheless, tuning database parameters can greatly improve the performance and lead to very competitive runtimes.

Database constraints applied to metabolic pathway reconstruction tools.

Science.gov (United States)

Vilaplana, Jordi; Solsona, Francesc; Teixido, Ivan; Usié, Anabel; Karathia, Hiren; Alves, Rui; Mateo, Jordi

2014-01-01

Our group developed two biological applications, Biblio-MetReS and Homol-MetReS, accessing the same database of organisms with annotated genes. Biblio-MetReS is a data-mining application that facilitates the reconstruction of molecular networks based on automated text-mining analysis of published scientific literature. Homol-MetReS allows functional (re)annotation of proteomes, to properly identify both the individual proteins involved in the process(es) of interest and their function. It also enables the sets of proteins involved in the process(es) in different organisms to be compared directly. The efficiency of these biological applications is directly related to the design of the shared database. We classified and analyzed the different kinds of access to the database. Based on this study, we tried to adjust and tune the configurable parameters of the database server to reach the best performance of the communication data link to/from the database system. Different database technologies were analyzed. We started the study with a public relational SQL database, MySQL. Then, the same database was implemented by a MapReduce-based database named HBase. The results indicated that the standard configuration of MySQL gives an acceptable performance for low or medium size databases. Nevertheless, tuning database parameters can greatly improve the performance and lead to very competitive runtimes.

In-core program for on line measurements of neutron, photon and nuclear heating parameters inside Jules Horowitz MTR reactor

International Nuclear Information System (INIS)

Lyoussi, A.; Reynard-Carette, C.

2014-01-01

Accurate on-line measurements of key parameters inside experimental channels of Material Testing Reactor are necessary to dimension the irradiation devices and consequently to conduct smart experiments on fuels and materials under suitable conditions. In particular the quantification of nuclear heating, a relevant parameter to reach adapted thermal conditions, has to be improved. These works focus on an important collaborative program between CEA and Aix-Marseille University called INCORE (Instrumentation for Nuclear radiations and Calorimetry On-line in Reactor) dedicated to the development of a new measurement methodology to quantify both nuclear heating and accurate radiation flux levels (neutrons and photons). The methodology, which is based on experiments carried out under irradiation conditions with a multi-sensor device (ionization chamber, fission chamber, gamma thermometer, calorimeter, SPND, SPGD) as well as works performed out-of nuclear/radiative environment on a reference sensor used to measure nuclear heating (calorimeter), is presented (authors)

On-line database of voltammetric data of immobilized particles for identifying pigments and minerals in archaeometry, conservation and restoration (ELCHER database)

Energy Technology Data Exchange (ETDEWEB)

Doménech-Carbó, Antonio, E-mail: antonio.domenech@uv.es [Departament de Química Analítica, Universitat de València, Dr. Moliner, 50, 46100, Burjassot, València (Spain); Doménech-Carbó, María Teresa, E-mail: tdomenec@crbc.upv.es [Institut de Restauració del Patrimoni, Universitat Politècnica de València, Camí de Vera 14, 46022, València (Spain); Valle-Algarra, Francisco Manuel; Gimeno-Adelantado, José Vicente [Departament de Química Analítica, Universitat de València, Dr. Moliner, 50, 46100, Burjassot, València (Spain); Osete-Cortina, Laura [Institut de Restauració del Patrimoni, Universitat Politècnica de València, Camí de Vera 14, 46022, València (Spain); Bosch-Reig, Francisco [Departament de Química Analítica, Universitat de València, Dr. Moliner, 50, 46100, Burjassot, València (Spain)

2016-07-13

A web-based database of voltammograms is presented for characterizing artists' pigments and corrosion products of ceramic, stone and metal objects by means of the voltammetry of immobilized particles methodology. Description of the website and the database is provided. Voltammograms are, in most cases, accompanied by scanning electron microphotographs, X-ray spectra, infrared spectra acquired in attenuated total reflectance Fourier transform infrared spectroscopy mode (ATR-FTIR) and diffuse reflectance spectra in the UV–Vis-region. For illustrating the usefulness of the database two case studies involving identification of pigments and a case study describing deterioration of an archaeological metallic object are presented. - Highlights: • A web-based database of voltammograms is presented. • The voltammetry of immobilized particles is used. • Artist's pigments and corrosion products of ceramic, stone and metal objects are included. • Examples of application on works of art are discussed.

On-line database of voltammetric data of immobilized particles for identifying pigments and minerals in archaeometry, conservation and restoration (ELCHER database)

International Nuclear Information System (INIS)

Doménech-Carbó, Antonio; Doménech-Carbó, María Teresa; Valle-Algarra, Francisco Manuel; Gimeno-Adelantado, José Vicente; Osete-Cortina, Laura; Bosch-Reig, Francisco

2016-01-01

A web-based database of voltammograms is presented for characterizing artists' pigments and corrosion products of ceramic, stone and metal objects by means of the voltammetry of immobilized particles methodology. Description of the website and the database is provided. Voltammograms are, in most cases, accompanied by scanning electron microphotographs, X-ray spectra, infrared spectra acquired in attenuated total reflectance Fourier transform infrared spectroscopy mode (ATR-FTIR) and diffuse reflectance spectra in the UV–Vis-region. For illustrating the usefulness of the database two case studies involving identification of pigments and a case study describing deterioration of an archaeological metallic object are presented. - Highlights: • A web-based database of voltammograms is presented. • The voltammetry of immobilized particles is used. • Artist's pigments and corrosion products of ceramic, stone and metal objects are included. • Examples of application on works of art are discussed.

Seasonal evolution of soil and plant parameters on the agricultural Gebesee test site: a database for the set-up and validation of EO-LDAS and satellite-aided retrieval models

Science.gov (United States)

Truckenbrodt, Sina C.; Schmullius, Christiane C.

2018-03-01

Ground reference data are a prerequisite for the calibration, update, and validation of retrieval models facilitating the monitoring of land parameters based on Earth Observation data. Here, we describe the acquisition of a comprehensive ground reference database which was created to test and validate the recently developed Earth Observation Land Data Assimilation System (EO-LDAS) and products derived from remote sensing observations in the visible and infrared range. In situ data were collected for seven crop types (winter barley, winter wheat, spring wheat, durum, winter rape, potato, and sugar beet) cultivated on the agricultural Gebesee test site, central Germany, in 2013 and 2014. The database contains information on hyperspectral surface reflectance factors, the evolution of biophysical and biochemical plant parameters, phenology, surface conditions, atmospheric states, and a set of ground control points. Ground reference data were gathered at an approximately weekly resolution and on different spatial scales to investigate variations within and between acreages. In situ data collected less than 1 day apart from satellite acquisitions (RapidEye, SPOT 5, Landsat-7 and -8) with a cloud coverage ≤ 25 % are available for 10 and 15 days in 2013 and 2014, respectively. The measurements show that the investigated growing seasons were characterized by distinct meteorological conditions causing interannual variations in the parameter evolution. Here, the experimental design of the field campaigns, and methods employed in the determination of all parameters, are described in detail. Insights into the database are provided and potential fields of application are discussed. The data will contribute to a further development of crop monitoring methods based on remote sensing techniques. The database is freely available at PANGAEA (https://doi.org/10.1594/PANGAEA.874251).

THE INTERNET PRESENTATION OF DATABASES OF GLACIERS OF THE SOUTH OF EASTERN SIBERIA

Directory of Open Access Journals (Sweden)

A. D. Kitov

2017-01-01

Full Text Available The authors consider the technology for creating databases of glaciers in Southern Siberia and the presentation of these databases on the Internet. The technology consists in the recognition and vectorization of spatial, multi-temporal data using GIS techniques, followed by the formation of databases that reflect the spatial and temporal variation of nival-glacial formations. The results of GIS design are presented on the website IG SB RAS and with the help of Internet service ArcGISonline on the public map. The mapping of databases shows the dynamic of nival-glacial formations for three time phases: the beginning of the 20th century (if you have data, its middle (the catalogs of glaciers and topographic maps and the beginning of the 21st century (according to satellite images and field research. Graphic objects are represented as point, line, and polygonal GIS-themes. Point-themes indicate parameters such as the center, lower and upper boundaries of the glacier. Line-themes determine the length and perimeter of the glacier. Polygonal-themes define the contour of the glacier and its area. The attributive table corresponds to the international standard World Glacier Inventory (WGI. The contours of the glaciers of northern Asia are represented conditionally (ellipses at international portals, and attribute characteristics correspond to the state that was displayed in catalogs of glaciers of the USSR, and they are inaccurate. Considered databases are devoid of these shortcomings. Coordinates of the center of glaciers have been refined. Glaciers contours have boundaries, appropriate to space images or topographic maps, in shp-file format. New glaciers of Baikalskiy and Barguzinskiy ridges are also presented. Existing catalogs and databases still do not include these glaciers. Features of the glaciers are examined in the context of the latitudinal transect of southern Siberia, from the Kodar ridge to the Eastern Sayan. GIS-analysis of the Databases

AFSC/ABL:Coded-wire tag (CWT) database for NOAA Fisheries, Alaska

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Information on CWT salmonids throughout the Pacific region is available in an on-line coastwide database, the Regional Mark Information System (RMIS). This database...

On-line adaptive battery impedance parameter and state estimation considering physical principles in reduced order equivalent circuit battery models part 2. Parameter and state estimation

Science.gov (United States)

Fleischer, Christian; Waag, Wladislaw; Heyn, Hans-Martin; Sauer, Dirk Uwe

2014-09-01

Lithium-ion battery systems employed in high power demanding systems such as electric vehicles require a sophisticated monitoring system to ensure safe and reliable operation. Three major states of the battery are of special interest and need to be constantly monitored. These include: battery state of charge (SoC), battery state of health (capacity fade determination, SoH), and state of function (power fade determination, SoF). The second paper concludes the series by presenting a multi-stage online parameter identification technique based on a weighted recursive least quadratic squares parameter estimator to determine the parameters of the proposed battery model from the first paper during operation. A novel mutation based algorithm is developed to determine the nonlinear current dependency of the charge-transfer resistance. The influence of diffusion is determined by an on-line identification technique and verified on several batteries at different operation conditions. This method guarantees a short response time and, together with its fully recursive structure, assures a long-term stable monitoring of the battery parameters. The relative dynamic voltage prediction error of the algorithm is reduced to 2%. The changes of parameters are used to determine the states of the battery. The algorithm is real-time capable and can be implemented on embedded systems.

A trending database for human performance events

International Nuclear Information System (INIS)

Harrison, D.

1993-01-01

An effective Operations Experience program includes a standardized methodology for the investigation of unplanned events and a tool capable of retaining investigation data for the purpose of trending analysis. A database used in conjunction with a formalized investigation procedure for the purpose of trending unplanning event data is described. The database follows the structure of INPO's Human Performance Enhancement System for investigations. The database screens duplicate on-line the HPES evaluation Forms. All information pertaining to investigations is collected, retained and entered into the database using these forms. The database will be used for trending analysis to determine if any significant patterns exist, for tracking progress over time both within AECL and against industry standards, and for evaluating the success of corrective actions. Trending information will be used to help prevent similar occurrences

Analysis of some coplanar transmission lines: coplanar coupled lines, coplanar coupled striplines, and coplanar coupled lines with rectangular microshield

Science.gov (United States)

Yuan, Naichang; He, Jianguo; Yao, Demiao; Dai, Qin; Lin, Weigan

1995-06-01

Two types of coplanar transmission lines, rectangular microshield coplanar coupled lines (RMCCL) and coplanar coupled rectangular microshield lines (CCRML), are proposed for MMIC applications. These are developed from coplanar coupled lines (CCL) and coplanar coupled strip lines (CCS). Analytic formulas are presented for calculating the quasistatic TEM parameters of these coupled lines by means of exact conformal mapping techniques. Numerical results are also presented to illustrate the properties of these coplanar transmission lines.

Estimation of failure probability of the end induced current depending on uncertain parameters of a transmission line

International Nuclear Information System (INIS)

Larbi, M.; Besnier, P.; Pecqueux, B.

2014-01-01

This paper treats about the risk analysis of an EMC default using a statistical approach based on reliability methods. A probability of failure (i.e. probability of exceeding a threshold) of an induced current by crosstalk is computed by taking into account uncertainties on input parameters influencing extreme levels of interference in the context of transmission lines. Results are compared to Monte Carlo simulation (MCS). (authors)

On-line database of voltammetric data of immobilized particles for identifying pigments and minerals in archaeometry, conservation and restoration (ELCHER database).

Science.gov (United States)

Doménech-Carbó, Antonio; Doménech-Carbó, María Teresa; Valle-Algarra, Francisco Manuel; Gimeno-Adelantado, José Vicente; Osete-Cortina, Laura; Bosch-Reig, Francisco

2016-07-13

A web-based database of voltammograms is presented for characterizing artists' pigments and corrosion products of ceramic, stone and metal objects by means of the voltammetry of immobilized particles methodology. Description of the website and the database is provided. Voltammograms are, in most cases, accompanied by scanning electron microphotographs, X-ray spectra, infrared spectra acquired in attenuated total reflectance Fourier transform infrared spectroscopy mode (ATR-FTIR) and diffuse reflectance spectra in the UV-Vis-region. For illustrating the usefulness of the database two case studies involving identification of pigments and a case study describing deterioration of an archaeological metallic object are presented. Copyright © 2016 Elsevier B.V. All rights reserved.

Identification of Alternative Splice Variants Using Unique Tryptic Peptide Sequences for Database Searches.

Science.gov (United States)

Tran, Trung T; Bollineni, Ravi C; Strozynski, Margarita; Koehler, Christian J; Thiede, Bernd

2017-07-07

Alternative splicing is a mechanism in eukaryotes by which different forms of mRNAs are generated from the same gene. Identification of alternative splice variants requires the identification of peptides specific for alternative splice forms. For this purpose, we generated a human database that contains only unique tryptic peptides specific for alternative splice forms from Swiss-Prot entries. Using this database allows an easy access to splice variant-specific peptide sequences that match to MS data. Furthermore, we combined this database without alternative splice variant-1-specific peptides with human Swiss-Prot. This combined database can be used as a general database for searching of LC-MS data. LC-MS data derived from in-solution digests of two different cell lines (LNCaP, HeLa) and phosphoproteomics studies were analyzed using these two databases. Several nonalternative splice variant-1-specific peptides were found in both cell lines, and some of them seemed to be cell-line-specific. Control and apoptotic phosphoproteomes from Jurkat T cells revealed several nonalternative splice variant-1-specific peptides, and some of them showed clear quantitative differences between the two states.

Olap Cube Representation For Objectoriented Database

OpenAIRE

Vipin Saxena; Ajay Pratap

2012-01-01

In the current scenario, the size of database related to any organization is rapidly increasing and due to evolution of the object-oriented approach, many of the Software Industries are converting the old structured approach based softwares into the object-oriented based softwares. Therefore, for the largeamount of database, it is necessary to study the faster retrieval system as On-Line Analytical Processing (OLAP) which was introduced by E.Codd in 1993. The present paper is an attempt in t...

TIGER/Line Shapefile, 2013, Series Information File for the Current All Lines Shapefiles

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

An OCD perspective of line edge and line width roughness metrology

Science.gov (United States)

Bonam, Ravi; Muthinti, Raja; Breton, Mary; Liu, Chi-Chun; Sieg, Stuart; Seshadri, Indira; Saulnier, Nicole; Shearer, Jeffrey; Patlolla, Raghuveer; Huang, Huai

2017-03-01

Metrology of nanoscale patterns poses multiple challenges that range from measurement noise, metrology errors, probe size etc. Optical Metrology has gained a lot of significance in the semiconductor industry due to its fast turn around and reliable accuracy, particularly to monitor in-line process variations. Apart from monitoring critical dimension, thickness of films, there are multiple parameters that can be extracted from Optical Metrology models3. Sidewall angles, material compositions etc., can also be modeled to acceptable accuracy. Line edge and Line Width roughness are much sought of metrology following critical dimension and its uniformity, although there has not been much development in them with optical metrology. Scanning Electron Microscopy is still used as a standard metrology technique for assessment of Line Edge and Line Width roughness. In this work we present an assessment of Optical Metrology and its ability to model roughness from a set of structures with intentional jogs to simulate both Line edge and Line width roughness at multiple amplitudes and frequencies. We also present multiple models to represent roughness and extract relevant parameters from Optical metrology. Another critical aspect of optical metrology setup is correlation of measurement to a complementary technique to calibrate models. In this work, we also present comparison of roughness parameters extracted and measured with variation of image processing conditions on a commercially available CD-SEM tool.

Database tools for enhanced analysis of TMX-U data

International Nuclear Information System (INIS)

Stewart, M.E.; Carter, M.R.; Casper, T.A.; Meyer, W.H.; Perkins, D.E.; Whitney, D.M.

1986-01-01

A commercial database software package has been used to create several databases and tools that assist and enhance the ability of experimental physicists to analyze data from the Tandem Mirror Experiment-Upgrade (TMX-U) experiment. This software runs on a DEC-20 computer in M-Divisions's User Service Center at Lawrence Livermore National Laboratory (LLNL), where data can be analyzed off line from the main TMX-U acquisition computers. When combined with interactive data analysis programs, these tools provide the capability to do batch-style processing or interactive data analysis on the computers in the USC or the supercomputers of the National Magnetic Fusion Energy Computer Center (NMFECC) in addition to the normal processing done by the TMX-U acquisition system. One database tool provides highly reduced data for searching and correlation analysis of several diagnostic signals within a single shot or over many shots. A second database tool provides retrieval and storage of unreduced data for use in detailed analysis of one or more diagnostic signals. We will show how these database tools form the core of an evolving off-line data analysis environment on the USC computers

A Unit-Test Framework for Database Applications

DEFF Research Database (Denmark)

Christensen, Claus Abildgaard; Gundersborg, Steen; de Linde, Kristian

The outcome of a test of an application that stores data in a database naturally depends on the state of the database. It is therefore important that test developers are able to set up and tear down database states in a simple and efficient manner. In existing unit-test frameworks, setting up...... test can be minimized. In addition, the reuse between unit tests can speed up the execution of test suites. A performance test on a medium-size project shows a 40% speed up and an estimated 25% reduction in the number of lines of test code....

Some Considerations about Modern Database Machines

Directory of Open Access Journals (Sweden)

Manole VELICANU

2010-01-01

Full Text Available Optimizing the two computing resources of any computing system - time and space - has al-ways been one of the priority objectives of any database. A current and effective solution in this respect is the computer database. Optimizing computer applications by means of database machines has been a steady preoccupation of researchers since the late seventies. Several information technologies have revolutionized the present information framework. Out of these, those which have brought a major contribution to the optimization of the databases are: efficient handling of large volumes of data (Data Warehouse, Data Mining, OLAP – On Line Analytical Processing, the improvement of DBMS – Database Management Systems facilities through the integration of the new technologies, the dramatic increase in computing power and the efficient use of it (computer networks, massive parallel computing, Grid Computing and so on. All these information technologies, and others, have favored the resumption of the research on database machines and the obtaining in the last few years of some very good practical results, as far as the optimization of the computing resources is concerned.

Seasonal evolution of soil and plant parameters on the agricultural Gebesee test site: a database for the set-up and validation of EO-LDAS and satellite-aided retrieval models

Directory of Open Access Journals (Sweden)

S. C. Truckenbrodt

2018-03-01

Full Text Available Ground reference data are a prerequisite for the calibration, update, and validation of retrieval models facilitating the monitoring of land parameters based on Earth Observation data. Here, we describe the acquisition of a comprehensive ground reference database which was created to test and validate the recently developed Earth Observation Land Data Assimilation System (EO-LDAS and products derived from remote sensing observations in the visible and infrared range. In situ data were collected for seven crop types (winter barley, winter wheat, spring wheat, durum, winter rape, potato, and sugar beet cultivated on the agricultural Gebesee test site, central Germany, in 2013 and 2014. The database contains information on hyperspectral surface reflectance factors, the evolution of biophysical and biochemical plant parameters, phenology, surface conditions, atmospheric states, and a set of ground control points. Ground reference data were gathered at an approximately weekly resolution and on different spatial scales to investigate variations within and between acreages. In situ data collected less than 1 day apart from satellite acquisitions (RapidEye, SPOT 5, Landsat-7 and -8 with a cloud coverage  ≤  25 % are available for 10 and 15 days in 2013 and 2014, respectively. The measurements show that the investigated growing seasons were characterized by distinct meteorological conditions causing interannual variations in the parameter evolution. Here, the experimental design of the field campaigns, and methods employed in the determination of all parameters, are described in detail. Insights into the database are provided and potential fields of application are discussed. The data will contribute to a further development of crop monitoring methods based on remote sensing techniques. The database is freely available at PANGAEA (https://doi.org/10.1594/PANGAEA.874251.

Editorial and scientific quality in the parameters for inclusion of journals commercial and open access databases

Directory of Open Access Journals (Sweden)

Cecilia Rozemblum

2015-04-01

Full Text Available In this article, the parameters used by RedALyC, Catalogo Latindex, SciELO, Scopus and Web of Science for the incorporation of scientific journals in their collections are analyzed with the goal of proving their relation with the objectives of each database in addition of debating the valuation that the scientific society is giving to those systems as decisive of "scientific quality". The used indicators are classified in: 1 Editorial quality (formal aspects or editorial management. 2 Content quality (peer review or originality and 3 Visibility (prestige of editors and editorial use and impact, accessibility and indexing It is revealed that: a between 9 and 16% of the indicators are related to the quality of content; b Lack specificity in their definition and determination of measure systems, and c match the goals of each base, although a marked trend towards formal aspects related and visibility is observed. Thus makes it clear that these systems pursuing their own objectives, making a core of journals of “quality” for its readership. We conclude, therefore, that the presence or absence of a journal in these collections is not sufficient to determine the quality of scientific magazine and its contents parameter.

CellMiner: a relational database and query tool for the NCI-60 cancer cell lines

Directory of Open Access Journals (Sweden)

Reinhold William C

2009-06-01

Full Text Available Abstract Background Advances in the high-throughput omic technologies have made it possible to profile cells in a large number of ways at the DNA, RNA, protein, chromosomal, functional, and pharmacological levels. A persistent problem is that some classes of molecular data are labeled with gene identifiers, others with transcript or protein identifiers, and still others with chromosomal locations. What has lagged behind is the ability to integrate the resulting data to uncover complex relationships and patterns. Those issues are reflected in full form by molecular profile data on the panel of 60 diverse human cancer cell lines (the NCI-60 used since 1990 by the U.S. National Cancer Institute to screen compounds for anticancer activity. To our knowledge, CellMiner is the first online database resource for integration of the diverse molecular types of NCI-60 and related meta data. Description CellMiner enables scientists to perform advanced querying of molecular information on NCI-60 (and additional types through a single web interface. CellMiner is a freely available tool that organizes and stores raw and normalized data that represent multiple types of molecular characterizations at the DNA, RNA, protein, and pharmacological levels. Annotations for each project, along with associated metadata on the samples and datasets, are stored in a MySQL database and linked to the molecular profile data. Data can be queried and downloaded along with comprehensive information on experimental and analytic methods for each data set. A Data Intersection tool allows selection of a list of genes (proteins in common between two or more data sets and outputs the data for those genes (proteins in the respective sets. In addition to its role as an integrative resource for the NCI-60, the CellMiner package also serves as a shell for incorporation of molecular profile data on other cell or tissue sample types. Conclusion CellMiner is a relational database tool for

Third-line Targeted Therapy in Metastatic Renal Cell Carcinoma: Results from the International Metastatic Renal Cell Carcinoma Database Consortium.

Science.gov (United States)

Wells, J Connor; Stukalin, Igor; Norton, Craig; Srinivas, Sandy; Lee, Jae Lyun; Donskov, Frede; Bjarnason, Georg A; Yamamoto, Haru; Beuselinck, Benoit; Rini, Brian I; Knox, Jennifer J; Agarwal, Neeraj; Ernst, D Scott; Pal, Sumanta K; Wood, Lori A; Bamias, Aristotelis; Alva, Ajjai S; Kanesvaran, Ravindran; Choueiri, Toni K; Heng, Daniel Y C

2017-02-01

The use of third-line targeted therapy (TTT) in metastatic renal cell carcinoma (mRCC) is not well characterized and varies due to the lack of robust data to guide treatment decisions. This study examined the use of third-line therapy in a large international population. To evaluate the use and efficacy of targeted therapy in a third-line setting. Twenty-five international cancer centers provided consecutive data on 4824 mRCC patients who were treated with an approved targeted therapy. One thousand and twelve patients (21%) received TTT and were included in the analysis. Patients were analyzed for overall survival (OS) and progression-free survival using Kaplan-Meier curves, and were evaluated for overall response. Cox regression analyses were used to determine the statistical association between OS and the six factors included in the International Metastatic Renal Cell Carcinoma Database Consortium (IMDC) prognostic model. Subgroup analysis was performed on patients stratified by their IMDC prognostic risk status. Everolimus was the most prevalent third-line therapy (27.5%), but sunitinib, sorafenib, pazopanib, temsirolimus, and axitinib were all utilized in over ≥9% of patients. Patients receiving any TTT had an OS of 12.4 mo, a progression-free survival of 3.9 mo, and 61.1% of patients experienced an overall response of stable disease or better. Patients not receiving TTT had an OS of 2.1 mo. Patients with favorable- (7.2%) or intermediate-risk (65.3%) disease had the highest OS with TTT, 29.9 mo and 15.5 mo, respectively, while poor-risk (27.5%) patients survived 5.5 mo. Results are limited by the retrospective nature of the study. TTT remains highly heterogeneous. The IMDC prognostic criteria can be used to stratify third-line patients. TTT use in favorable- and intermediate-risk patients was associated with the greatest OS. Patients with favorable- and intermediate-prognostic criteria disease treated with third-line targeted therapy have an associated

Regridded Harmonized World Soil Database v1.2

Data.gov (United States)

National Aeronautics and Space Administration — This data set describes select global soil parameters from the Harmonized World Soil Database (HWSD) v1.2, including additional calculated parameters such as area...

The Genomes On Line Database (GOLD) in 2009: status of genomic and metagenomic projects and their associated metadata

Science.gov (United States)

Liolios, Konstantinos; Chen, I-Min A.; Mavromatis, Konstantinos; Tavernarakis, Nektarios; Hugenholtz, Philip; Markowitz, Victor M.; Kyrpides, Nikos C.

2010-01-01

The Genomes On Line Database (GOLD) is a comprehensive resource for centralized monitoring of genome and metagenome projects worldwide. Both complete and ongoing projects, along with their associated metadata, can be accessed in GOLD through precomputed tables and a search page. As of September 2009, GOLD contains information for more than 5800 sequencing projects, of which 1100 have been completed and their sequence data deposited in a public repository. GOLD continues to expand, moving toward the goal of providing the most comprehensive repository of metadata information related to the projects and their organisms/environments in accordance with the Minimum Information about a (Meta)Genome Sequence (MIGS/MIMS) specification. GOLD is available at: http://www.genomesonline.org and has a mirror site at the Institute of Molecular Biology and Biotechnology, Crete, Greece, at: http://gold.imbb.forth.gr/ PMID:19914934

The PEP-II project-wide database

International Nuclear Information System (INIS)

Chan, A.; Calish, S.; Crane, G.; MacGregor, I.; Meyer, S.; Wong, J.

1995-05-01

The PEP-II Project Database is a tool for monitoring the technical and documentation aspects of this accelerator construction. It holds the PEP-II design specifications, fabrication and installation data in one integrated system. Key pieces of the database include the machine parameter list, magnet and vacuum fabrication data. CAD drawings, publications and documentation, survey and alignment data and property control. The database can be extended to contain information required for the operations phase of the accelerator and detector. Features such as viewing CAD drawing graphics from the database will be implemented in the future. This central Oracle database on a UNIX server is built using ORACLE Case tools. Users at the three collaborating laboratories (SLAC, LBL, LLNL) can access the data remotely, using various desktop computer platforms and graphical interfaces

Materials data through a bibliographic database INIS

International Nuclear Information System (INIS)

Yamamoto, Akira; Itabashi, Keizo; Nakajima, Hidemitsu

1992-01-01

INIS (International Nuclear Information System) is a bibliographic database produced by collaboration of IAEA and its member countries, holding 1,500,000 records as of 1991. Although a bibliographic database does not provide numerical data itself, specific materials information can be obtained through retrieval specifying materials, properties conditions, measuring methods, etc. Also, 'data flagging' facilitates searching a record containing data. INIS has also a function of clearing house that provides original documents of scarce distribution. Hard copies of the technical reports or other non-conventional literatures are available. An efficient use of INIS database for the materials data is presented using an on-line terminal. (author)

On-line monitoring of solar cell module production by ellipsometry technique

International Nuclear Information System (INIS)

Fried, M.

2014-01-01

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe 2 , thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

On-line monitoring of solar cell module production by ellipsometry technique

Energy Technology Data Exchange (ETDEWEB)

Fried, M., E-mail: fried@mfa.kfki.hu

2014-11-28

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe{sub 2}, thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

On-line biomedical databases-the best source for quick search of the scientific information in the biomedicine.

Science.gov (United States)

Masic, Izet; Milinovic, Katarina

2012-06-01

Most of medical journals now has it's electronic version, available over public networks. Although there are parallel printed and electronic versions, and one other form need not to be simultaneously published. Electronic version of a journal can be published a few weeks before the printed form and must not has identical content. Electronic form of a journals may have an extension that does not contain a printed form, such as animation, 3D display, etc., or may have available fulltext, mostly in PDF or XML format, or just the contents or a summary. Access to a full text is usually not free and can be achieved only if the institution (library or host) enters into an agreement on access. Many medical journals, however, provide free access for some articles, or after a certain time (after 6 months or a year) to complete content. The search for such journals provide the network archive as High Wire Press, Free Medical Journals.com. It is necessary to allocate PubMed and PubMed Central, the first public digital archives unlimited collect journals of available medical literature, which operates in the system of the National Library of Medicine in Bethesda (USA). There are so called on- line medical journals published only in electronic form. It could be searched over on-line databases. In this paper authors shortly described about 30 data bases and short instructions how to make access and search the published papers in indexed medical journals.

HIPdb: a database of experimentally validated HIV inhibiting peptides.

Science.gov (United States)

Qureshi, Abid; Thakur, Nishant; Kumar, Manoj

2013-01-01

Besides antiretroviral drugs, peptides have also demonstrated potential to inhibit the Human immunodeficiency virus (HIV). For example, T20 has been discovered to effectively block the HIV entry and was approved by the FDA as a novel anti-HIV peptide (AHP). We have collated all experimental information on AHPs at a single platform. HIPdb is a manually curated database of experimentally verified HIV inhibiting peptides targeting various steps or proteins involved in the life cycle of HIV e.g. fusion, integration, reverse transcription etc. This database provides experimental information of 981 peptides. These are of varying length obtained from natural as well as synthetic sources and tested on different cell lines. Important fields included are peptide sequence, length, source, target, cell line, inhibition/IC(50), assay and reference. The database provides user friendly browse, search, sort and filter options. It also contains useful services like BLAST and 'Map' for alignment with user provided sequences. In addition, predicted structure and physicochemical properties of the peptides are also included. HIPdb database is freely available at http://crdd.osdd.net/servers/hipdb. Comprehensive information of this database will be helpful in selecting/designing effective anti-HIV peptides. Thus it may prove a useful resource to researchers for peptide based therapeutics development.

Drug interaction databases in medical literature

DEFF Research Database (Denmark)

Kongsholm, Gertrud Gansmo; Nielsen, Anna Katrine Toft; Damkier, Per

2015-01-01

PURPOSE: It is well documented that drug-drug interaction databases (DIDs) differ substantially with respect to classification of drug-drug interactions (DDIs). The aim of this study was to study online available transparency of ownership, funding, information, classifications, staff training...... available transparency of ownership, funding, information, classifications, staff training, and underlying documentation varies substantially among various DIDs. Open access DIDs had a statistically lower score on parameters assessed....... and the three most commonly used subscription DIDs in the medical literature. The following parameters were assessed for each of the databases: Ownership, classification of interactions, primary information sources, and staff qualification. We compared the overall proportion of yes/no answers from open access...

DOE technology information management system database study report

Energy Technology Data Exchange (ETDEWEB)

Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

1994-11-01

To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

Renal Gene Expression Database (RGED): a relational database of gene expression profiles in kidney disease

Science.gov (United States)

Zhang, Qingzhou; Yang, Bo; Chen, Xujiao; Xu, Jing; Mei, Changlin; Mao, Zhiguo

2014-01-01

We present a bioinformatics database named Renal Gene Expression Database (RGED), which contains comprehensive gene expression data sets from renal disease research. The web-based interface of RGED allows users to query the gene expression profiles in various kidney-related samples, including renal cell lines, human kidney tissues and murine model kidneys. Researchers can explore certain gene profiles, the relationships between genes of interests and identify biomarkers or even drug targets in kidney diseases. The aim of this work is to provide a user-friendly utility for the renal disease research community to query expression profiles of genes of their own interest without the requirement of advanced computational skills. Availability and implementation: Website is implemented in PHP, R, MySQL and Nginx and freely available from http://rged.wall-eva.net. Database URL: http://rged.wall-eva.net PMID:25252782

Precise predictions of H2O line shapes over a wide pressure range using simulations corrected by a single measurement

Science.gov (United States)

Ngo, N. H.; Nguyen, H. T.; Tran, H.

2018-03-01

In this work, we show that precise predictions of the shapes of H2O rovibrational lines broadened by N2, over a wide pressure range, can be made using simulations corrected by a single measurement. For that, we use the partially-correlated speed-dependent Keilson-Storer (pcsdKS) model whose parameters are deduced from molecular dynamics simulations and semi-classical calculations. This model takes into account the collision-induced velocity-changes effects, the speed dependences of the collisional line width and shift as well as the correlation between velocity and internal-state changes. For each considered transition, the model is corrected by using a parameter deduced from its broadening coefficient measured for a single pressure. The corrected-pcsdKS model is then used to simulate spectra for a wide pressure range. Direct comparisons of the corrected-pcsdKS calculated and measured spectra of 5 rovibrational lines of H2O for various pressures, from 0.1 to 1.2 atm, show very good agreements. Their maximum differences are in most cases well below 1%, much smaller than residuals obtained when fitting the measurements with the Voigt line shape. This shows that the present procedure can be used to predict H2O line shapes for various pressure conditions and thus the simulated spectra can be used to deduce the refined line-shape parameters to complete spectroscopic databases, in the absence of relevant experimental values.

A high-energy nuclear database proposal

International Nuclear Information System (INIS)

Brown, D.A.; Vogt, R.; UC Davis, CA

2006-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from the Bevalac, AGS and SPS to RHIC and LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews. (author)

Similarity law for Widom lines and coexistence lines.

Science.gov (United States)

Banuti, D T; Raju, M; Ihme, M

2017-05-01

The coexistence line of a fluid separates liquid and gaseous states at subcritical pressures, ending at the critical point. Only recently, it became clear that the supercritical state space can likewise be divided into regions with liquidlike and gaslike properties, separated by an extension to the coexistence line. This crossover line is commonly referred to as the Widom line, and is characterized by large changes in density or enthalpy, manifesting as maxima in the thermodynamic response functions. Thus, a reliable representation of the coexistence line and the Widom line is important for sub- and supercritical applications that depend on an accurate prediction of fluid properties. While it is known for subcritical pressures that nondimensionalization with the respective species critical pressures p_{cr} and temperatures T_{cr} only collapses coexistence line data for simple fluids, this approach is used for Widom lines of all fluids. However, we show here that the Widom line does not adhere to the corresponding states principle, but instead to the extended corresponding states principle. We resolve this problem in two steps. First, we propose a Widom line functional based on the Clapeyron equation and derive an analytical, species specific expression for the only parameter from the Soave-Redlich-Kwong equation of state. This parameter is a function of the acentric factor ω and compares well with experimental data. Second, we introduce the scaled reduced pressure p_{r}^{*} to replace the previously used reduced pressure p_{r}=p/p_{cr}. We show that p_{r}^{*} is a function of the acentric factor only and can thus be readily determined from fluid property tables. It collapses both subcritical coexistence line and supercritical Widom line data over a wide range of species with acentric factors ranging from -0.38 (helium) to 0.34 (water), including alkanes up to n-hexane. By using p_{r}^{*}, the extended corresponding states principle can be applied within

Atomic Data for the CHIANTI Database

Science.gov (United States)

Bhatia, Anand K.; Landi, E.

2012-01-01

The CHIANTI spectral code consists of an atomic database and a suite of computer programs to calculate the optically thin spectrum of astrophysical objects and to carry out spectroscopic plasma diagnostics. The database includes atomic energy levels, wavelengths, radiative transition rates, collisional excitation, ionization and recombination rate coefficients, as well as data to calculate free-free, free-bound and two-photon continuum emission. In recent years, we have been pursuing a program to calculate atomic data for ions whose lines have been observed in astrophysical spectra but have been neglected in the literature, and to provide CHIANTI with all the data necessary to predict line intensities. There are two types of such ions: those for which calculations are available for low-energy configurations but not for high-energy configurations (i.e., C-like, N-like, O-like systems), and ions that have never or only seldom been studied. This poster will summarize the current status of this project and indicate the future activities .

SSC lattice database and graphical interface

International Nuclear Information System (INIS)

Trahern, C.G.; Zhou, J.

1991-11-01

When completed the Superconducting Super Collider will be the world's largest accelerator complex. In order to build this system on schedule, the use of database technologies will be essential. In this paper we discuss one of the database efforts underway at the SSC, the lattice database. The SSC lattice database provides a centralized source for the design of each major component of the accelerator complex. This includes the two collider rings, the High Energy Booster, Medium Energy Booster, Low Energy Booster, and the LINAC as well as transfer and test beam lines. These designs have been created using a menagerie of programs such as SYNCH, DIMAD, MAD, TRANSPORT, MAGIC, TRACE3D AND TEAPOT. However, once a design has been completed, it is entered into a uniform database schema in the database system. In this paper we discuss the reasons for creating the lattice database and its implementation via the commercial database system SYBASE. Each lattice in the lattice database is composed of a set of tables whose data structure can describe any of the SSC accelerator lattices. In order to allow the user community access to the databases, a programmatic interface known as dbsf (for database to several formats) has been written. Dbsf creates ascii input files appropriate to the above mentioned accelerator design programs. In addition it has a binary dataset output using the Self Describing Standard data discipline provided with the Integrated Scientific Tool Kit software tools. Finally we discuss the graphical interfaces to the lattice database. The primary interface, known as OZ, is a simulation environment as well as a database browser

A Study of Memory Effects in a Chess Database.

Science.gov (United States)

Schaigorodsky, Ana L; Perotti, Juan I; Billoni, Orlando V

2016-01-01

A series of recent works studying a database of chronologically sorted chess games-containing 1.4 million games played by humans between 1998 and 2007- have shown that the popularity distribution of chess game-lines follows a Zipf's law, and that time series inferred from the sequences of those game-lines exhibit long-range memory effects. The presence of Zipf's law together with long-range memory effects was observed in several systems, however, the simultaneous emergence of these two phenomena were always studied separately up to now. In this work, by making use of a variant of the Yule-Simon preferential growth model, introduced by Cattuto et al., we provide an explanation for the simultaneous emergence of Zipf's law and long-range correlations memory effects in a chess database. We find that Cattuto's Model (CM) is able to reproduce both, Zipf's law and the long-range correlations, including size-dependent scaling of the Hurst exponent for the corresponding time series. CM allows an explanation for the simultaneous emergence of these two phenomena via a preferential growth dynamics, including a memory kernel, in the popularity distribution of chess game-lines. This mechanism results in an aging process in the chess game-line choice as the database grows. Moreover, we find burstiness in the activity of subsets of the most active players, although the aggregated activity of the pool of players displays inter-event times without burstiness. We show that CM is not able to produce time series with bursty behavior providing evidence that burstiness is not required for the explanation of the long-range correlation effects in the chess database. Our results provide further evidence favoring the hypothesis that long-range correlations effects are a consequence of the aging of game-lines and not burstiness, and shed light on the mechanism that operates in the simultaneous emergence of Zipf's law and long-range correlations in a community of chess players.

A Study of Memory Effects in a Chess Database.

Directory of Open Access Journals (Sweden)

Ana L Schaigorodsky

Full Text Available A series of recent works studying a database of chronologically sorted chess games-containing 1.4 million games played by humans between 1998 and 2007- have shown that the popularity distribution of chess game-lines follows a Zipf's law, and that time series inferred from the sequences of those game-lines exhibit long-range memory effects. The presence of Zipf's law together with long-range memory effects was observed in several systems, however, the simultaneous emergence of these two phenomena were always studied separately up to now. In this work, by making use of a variant of the Yule-Simon preferential growth model, introduced by Cattuto et al., we provide an explanation for the simultaneous emergence of Zipf's law and long-range correlations memory effects in a chess database. We find that Cattuto's Model (CM is able to reproduce both, Zipf's law and the long-range correlations, including size-dependent scaling of the Hurst exponent for the corresponding time series. CM allows an explanation for the simultaneous emergence of these two phenomena via a preferential growth dynamics, including a memory kernel, in the popularity distribution of chess game-lines. This mechanism results in an aging process in the chess game-line choice as the database grows. Moreover, we find burstiness in the activity of subsets of the most active players, although the aggregated activity of the pool of players displays inter-event times without burstiness. We show that CM is not able to produce time series with bursty behavior providing evidence that burstiness is not required for the explanation of the long-range correlation effects in the chess database. Our results provide further evidence favoring the hypothesis that long-range correlations effects are a consequence of the aging of game-lines and not burstiness, and shed light on the mechanism that operates in the simultaneous emergence of Zipf's law and long-range correlations in a community of chess

A guide to Internet atomic databases for hot plasmas

International Nuclear Information System (INIS)

Ralchenko, Yuri

2006-01-01

Internet atomic databases are nowadays considered to be the primary tool for dissemination of atomic data. We present here a review of numerical and bibliographic databases of importance for diagnostics of hot plasmas. Special attention is given to new and emerging trends, such as online calculation of various atomic parameters. The recently updated NIST databases are presented in detail

A guide to Internet atomic databases for hot plasmas

Energy Technology Data Exchange (ETDEWEB)

Ralchenko, Yuri [National Institute of Standards and Technology, Gaithersburg, MD 20899-8422 (United States)]. E-mail: yuri.ralchenko@nist.gov

2006-05-15

Internet atomic databases are nowadays considered to be the primary tool for dissemination of atomic data. We present here a review of numerical and bibliographic databases of importance for diagnostics of hot plasmas. Special attention is given to new and emerging trends, such as online calculation of various atomic parameters. The recently updated NIST databases are presented in detail.

Database automation of accelerator operation

International Nuclear Information System (INIS)

Casstevens, B.J.; Ludemann, C.A.

1983-01-01

Database management techniques are applied to automating the setup of operating parameters of a heavy-ion accelerator used in nuclear physics experiments. Data files consist of ion-beam attributes, the interconnection assignments of the numerous power supplies and magnetic elements that steer the ions' path through the system, the data values that represent the electrical currents supplied by the power supplies, as well as the positions of motors and status of mechanical actuators. The database is relational and permits searching on ranges of any subset of the ion-beam attributes. A file selected from the database is used by the control software to replicate the ion beam conditions by adjusting the physical elements in a continuous manner

Probability of extreme interference levels computed from reliability approaches: application to transmission lines with uncertain parameters

International Nuclear Information System (INIS)

Larbi, M.; Besnier, P.; Pecqueux, B.

2014-01-01

This paper deals with the risk analysis of an EMC default using a statistical approach. It is based on reliability methods from probabilistic engineering mechanics. A computation of probability of failure (i.e. probability of exceeding a threshold) of an induced current by crosstalk is established by taking into account uncertainties on input parameters influencing levels of interference in the context of transmission lines. The study has allowed us to evaluate the probability of failure of the induced current by using reliability methods having a relative low computational cost compared to Monte Carlo simulation. (authors)

On-line scheme for parameter estimation of nonlinear lithium ion battery equivalent circuit models using the simplified refined instrumental variable method for a modified Wiener continuous-time model

International Nuclear Information System (INIS)

Allafi, Walid; Uddin, Kotub; Zhang, Cheng; Mazuir Raja Ahsan Sha, Raja; Marco, James

2017-01-01

Highlights: •Off-line estimation approach for continuous-time domain for non-invertible function. •Model reformulated to multi-input-single-output; nonlinearity described by sigmoid. •Method directly estimates parameters of nonlinear ECM from the measured-data. •Iterative on-line technique leads to smoother convergence. •The model is validated off-line and on-line using NCA battery. -- Abstract: The accuracy of identifying the parameters of models describing lithium ion batteries (LIBs) in typical battery management system (BMS) applications is critical to the estimation of key states such as the state of charge (SoC) and state of health (SoH). In applications such as electric vehicles (EVs) where LIBs are subjected to highly demanding cycles of operation and varying environmental conditions leading to non-trivial interactions of ageing stress factors, this identification is more challenging. This paper proposes an algorithm that directly estimates the parameters of a nonlinear battery model from measured input and output data in the continuous time-domain. The simplified refined instrumental variable method is extended to estimate the parameters of a Wiener model where there is no requirement for the nonlinear function to be invertible. To account for nonlinear battery dynamics, in this paper, the typical linear equivalent circuit model (ECM) is enhanced by a block-oriented Wiener configuration where the nonlinear memoryless block following the typical ECM is defined to be a sigmoid static nonlinearity. The nonlinear Weiner model is reformulated in the form of a multi-input, single-output linear model. This linear form allows the parameters of the nonlinear model to be estimated using any linear estimator such as the well-established least squares (LS) algorithm. In this paper, the recursive least square (RLS) method is adopted for online parameter estimation. The approach was validated on experimental data measured from an 18650-type Graphite

Proposal for a High Energy Nuclear Database

International Nuclear Information System (INIS)

Brown, David A.; Vogt, Ramona

2005-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac and AGS to RHIC to CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews

The Genomes OnLine Database (GOLD) v.4: status of genomic and metagenomic projects and their associated metadata

Science.gov (United States)

Pagani, Ioanna; Liolios, Konstantinos; Jansson, Jakob; Chen, I-Min A.; Smirnova, Tatyana; Nosrat, Bahador; Markowitz, Victor M.; Kyrpides, Nikos C.

2012-01-01

The Genomes OnLine Database (GOLD, http://www.genomesonline.org/) is a comprehensive resource for centralized monitoring of genome and metagenome projects worldwide. Both complete and ongoing projects, along with their associated metadata, can be accessed in GOLD through precomputed tables and a search page. As of September 2011, GOLD, now on version 4.0, contains information for 11 472 sequencing projects, of which 2907 have been completed and their sequence data has been deposited in a public repository. Out of these complete projects, 1918 are finished and 989 are permanent drafts. Moreover, GOLD contains information for 340 metagenome studies associated with 1927 metagenome samples. GOLD continues to expand, moving toward the goal of providing the most comprehensive repository of metadata information related to the projects and their organisms/environments in accordance with the Minimum Information about any (x) Sequence specification and beyond. PMID:22135293

Experimental determination of the x-ray atomic fundamental parameters of nickel

Science.gov (United States)

Ménesguen, Y.; Lépy, M.-C.; Hönicke, P.; Müller, M.; Unterumsberger, R.; Beckhoff, B.; Hoszowska, J.; Dousse, J.-Cl; Błachucki, W.; Ito, Y.; Yamashita, M.; Fukushima, S.

2018-02-01

The x-ray atomic properties of nickel (Ni) were investigated in a unique approach combining different experimental techniques to obtain new, useful and reliable values of atomic fundamental parameters for x-ray spectrometric purposes and for comparison with theoretical predictions. We determined the mass attenuation coefficients in an energy range covering the L- and K-absorption edges, the K-shell fluorescence yield and the Kβ/Kα and Kβ1, 3/Kα1, 2 transition probability ratios. The obtained line profiles and linewidths of the Kα and Kβ transitions in Ni can be considered as the contribution of the satellite lines arising from the [KM] shake processes suggested by Deutsch et al (1995 Phys. Rev. A 51 283) and Ito et al (2016 Phys. Rev. A 94 042506). Comparison of the new data with several databases showed good agreement, but also discrepancies were found with existing tabulated values.

Database structures and interfaces for W7-X

International Nuclear Information System (INIS)

Heimann, P.; Bluhm, T.; Hennig, Ch.; Kroiss, H.; Kuehner, G.; Maier, J.; Riemann, H.; Zilker, M.

2008-01-01

The W7-X experiment of the IPP, under construction in Greifswald Germany, is designed to operate in a quasi-steady-state scenario. The database structures and interfaces used for discharge description and execution have to reflect this continuous mode of operation. In close collaboration between the control group of W7-X and the data acquisition group a combined design of the data structures used for describing the configuration and the operation of the experiment was developed. To guarantee access to this information from all participating stations a TCP/IP portal and a proxy server were developed. This portal enables especially the VxWorks real-time operating systems of the control stations to access the information in the object-oriented database. The database schema includes now a more functional description of the experiment and gives the physicists a more simplified view of the necessary definitions of operational parameters. The scheduling of the long discharges of W7-X will be done by predefining operational parameters in segments and scenarios, where a scenario is a fixed sequence of segments with a common physical background. To hide the specialized information contained in the basic parameters from the experiment leader or physicist an abstraction layer was introduced that only shows physically interesting information. An executable segment will be generated after verifying the consistency of the high-level parameters by using a transformation function for every basic parameter needed. Since the database contains all configurations and discharge definitions necessary to operate the experiment, it is very important to give the user a tool to manipulate this information in an intuitive way. A special editor (ConfiX) was designed and implemented for this task. At the moment the basic functionality for dealing with all kind of objects in the database is available. Future releases will extend the functionality to defining and editing configurations, segments

On-line analysis of hydrogen and other parameters in the mineral and energy industries

International Nuclear Information System (INIS)

Sowerby, B.D.

1998-01-01

The objective of the project is the development and industrial application of nuclear and microwave techniques for the on-line determination of hydrogen, moisture and other parameters. This document presents progress with respect to the stated objectives. A laboratory feasibility study has been carried out on new and advanced neutron and gamma ray analysis systems for the direct on-conveyor belt analysis of ash in coal. Neutron inelastic scattering and thermal neutron capture gamma ray technique were used in development of an on-belt elemental analyser for cement industry. Microwave based technology has been developed for on-conveyor belt determination of moisture in coal. A fast neutron and gamma-ray transmission technique has been applied for on-belt determination of moisture in lump coke

An international database of radionuclide concentration ratios for wildlife: development and uses

International Nuclear Information System (INIS)

Copplestone, D.; Beresford, N.A.; Brown, J.E.; Yankovich, T.

2013-01-01

A key element of most systems for assessing the impact of radionuclides on the environment is a means to estimate the transfer of radionuclides to organisms. To facilitate this, an international wildlife transfer database has been developed to provide an online, searchable compilation of transfer parameters in the form of equilibrium-based whole-organism to media concentration ratios. This paper describes the derivation of the wildlife transfer database, the key data sources it contains and highlights the applications for the data. -- Highlights: • An online database containing wildlife radionuclide transfer parameters is described. • Database underpins recent ICRP and IAEA data wildlife transfer compilations. • Database contains equilibrium based whole organism to media concentration ratios

Spectral Line Shapes. Proceedings

International Nuclear Information System (INIS)

Zoppi, M.; Ulivi, L.

1997-01-01

These proceedings represent papers presented at the 13th International Conference on Spectral Line Shapes which was held in Firenze,Italy from June 16-21, 1996. The topics covered a wide range of subjects emphasizing the physical processes associated with the formation of line profiles: high and low density plasma; atoms and molecules in strong laser fields, Dopple-free and ultra-fine spectroscopy; the line shapes generated by the interaction of neutrals, atoms and molecules, where the relavant quantities are single particle properties, and the interaction-induced spectroscopy. There were 131 papers presented at the conference, out of these, 6 have been abstracted for the Energy Science and Technology database

ESTIMATION OF DISTANCES TO STARS WITH STELLAR PARAMETERS FROM LAMOST

Energy Technology Data Exchange (ETDEWEB)

Carlin, Jeffrey L.; Newberg, Heidi Jo [Department of Physics, Applied Physics and Astronomy, Rensselaer Polytechnic Institute, Troy, NY 12180 (United States); Liu, Chao; Deng, Licai; Li, Guangwei; Luo, A-Li; Wu, Yue; Yang, Ming; Zhang, Haotong [Key Lab of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Beers, Timothy C. [Department of Physics and JINA: Joint Institute for Nuclear Astrophysics, University of Notre Dame, 225 Nieuwland Science Hall, Notre Dame, IN 46556 (United States); Chen, Li; Hou, Jinliang; Smith, Martin C. [Shanghai Astronomical Observatory, 80 Nandan Road, Shanghai 200030 (China); Guhathakurta, Puragra [UCO/Lick Observatory, Department of Astronomy and Astrophysics, University of California, Santa Cruz, CA 95064 (United States); Hou, Yonghui [Nanjing Institute of Astronomical Optics and Technology, National Astronomical Observatories, Chinese Academy of Sciences, Nanjing 210042 (China); Lépine, Sébastien [Department of Physics and Astronomy, Georgia State University, 25 Park Place, Suite 605, Atlanta, GA 30303 (United States); Yanny, Brian [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States); Zheng, Zheng, E-mail: jeffreylcarlin@gmail.com [Department of Physics and Astronomy, University of Utah, UT 84112 (United States)

2015-07-15

We present a method to estimate distances to stars with spectroscopically derived stellar parameters. The technique is a Bayesian approach with likelihood estimated via comparison of measured parameters to a grid of stellar isochrones, and returns a posterior probability density function for each star’s absolute magnitude. This technique is tailored specifically to data from the Large Sky Area Multi-object Fiber Spectroscopic Telescope (LAMOST) survey. Because LAMOST obtains roughly 3000 stellar spectra simultaneously within each ∼5° diameter “plate” that is observed, we can use the stellar parameters of the observed stars to account for the stellar luminosity function and target selection effects. This removes biasing assumptions about the underlying populations, both due to predictions of the luminosity function from stellar evolution modeling, and from Galactic models of stellar populations along each line of sight. Using calibration data of stars with known distances and stellar parameters, we show that our method recovers distances for most stars within ∼20%, but with some systematic overestimation of distances to halo giants. We apply our code to the LAMOST database, and show that the current precision of LAMOST stellar parameters permits measurements of distances with ∼40% error bars. This precision should improve as the LAMOST data pipelines continue to be refined.

Speed-dependent Voigt lineshape parameter database from dual frequency comb measurements up to 1305 K. Part I: Pure H2O absorption, 6801-7188 cm-1

Science.gov (United States)

Schroeder, Paul J.; Cich, Matthew J.; Yang, Jinyu; Giorgetta, Fabrizio R.; Swann, William C.; Coddington, Ian; Newbury, Nathan R.; Drouin, Brian J.; Rieker, Gregory B.

2018-05-01

We measure speed-dependent Voigt lineshape parameters with temperature-dependence exponents for several hundred spectroscopic features of pure water spanning 6801-7188 cm-1. The parameters are extracted from broad bandwidth, high-resolution dual frequency comb absorption spectra with multispectrum fitting techniques. The data encompass 25 spectra ranging from 296 K to 1305 K and 1 to 17 Torr of pure water vapor. We present the extracted parameters, compare them to published data, and present speed-dependence, self-shift, and self-broadening temperature-dependent parameters for the first time. Lineshape data is extracted using a quadratic speed-dependent Voigt profile and a single self-broadening power law temperature-dependence exponent over the entire temperature range. The results represent an important step toward a new high-temperature database using advanced lineshape profiles.

DEIMOS – an Open Source Image Database

Directory of Open Access Journals (Sweden)

M. Blazek

2011-12-01

Full Text Available The DEIMOS (DatabasE of Images: Open Source is created as an open-source database of images and videos for testing, verification and comparing of various image and/or video processing techniques such as enhancing, compression and reconstruction. The main advantage of DEIMOS is its orientation to various application fields – multimedia, television, security, assistive technology, biomedicine, astronomy etc. The DEIMOS is/will be created gradually step-by-step based upon the contributions of team members. The paper is describing basic parameters of DEIMOS database including application examples.

Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

A web-based database for EPR centers in semiconductors

International Nuclear Information System (INIS)

Umeda, T.; Hagiwara, S.; Katagiri, M.; Mizuochi, N.; Isoya, J.

2006-01-01

We develop a web-based database system for electron paramagnetic resonance (EPR) centers in semiconductors. This database is available to anyone at http://www.kc.tsukuba.ac.jp/div-media/epr/. It currently has more than 300 records of the spin-Hamiltonian parameters for major known EPR centers. One can upload own new records to the database or can use simulation tools powered by EPR-NMR(C). Here, we describe the features and objectives of this database, and mention some future plans

Developments in diffraction databases

International Nuclear Information System (INIS)

Jenkins, R.

1999-01-01

Full text: There are a number of databases available to the diffraction community. Two of the more important of these are the Powder Diffraction File (PDF) maintained by the International Centre for Diffraction Data (ICDD), and the Inorganic Crystal Structure Database (ICSD) maintained by Fachsinformationzentrum (FIZ, Karlsruhe). In application, the PDF has been used as an indispensable tool in phase identification and identification of unknowns. The ICSD database has extensive and explicit reference to the structures of compounds: atomic coordinates, space group and even thermal vibration parameters. A similar database, but for organic compounds, is maintained by the Cambridge Crystallographic Data Centre. These databases are often used as independent sources of information. However, little thought has been given on how to exploit the combined properties of structural database tools. A recently completed agreement between ICDD and FIZ, plus ICDD and Cambridge, provides a first step in complementary use of the PDF and the ICSD databases. The focus of this paper (as indicated below) is to examine ways of exploiting the combined properties of both databases. In 1996, there were approximately 76,000 entries in the PDF and approximately 43,000 entries in the ICSD database. The ICSD database has now been used to calculate entries in the PDF. Thus, to derive d-spacing and peak intensity data requires the synthesis of full diffraction patterns, i.e., we use the structural data in the ICSD database and then add instrumental resolution information. The combined data from PDF and ICSD can be effectively used in many ways. For example, we can calculate PDF data for an ideally random crystal distribution and also in the absence of preferred orientation. Again, we can use systematic studies of intermediate members in solid solutions series to help produce reliable quantitative phase analyses. In some cases, we can study how solid solution properties vary with composition and

Spectral lines of methane measured up to 2.6 THz at sub-MHz accuracy with a CW-THz photomixing spectrometer: Line positions of rotational transitions induced by centrifugal distortion

Science.gov (United States)

Bray, C.; Cuisset, A.; Hindle, F.; Mouret, G.; Bocquet, R.; Boudon, V.

2017-12-01

Several Doppler-limited rotational transitions of methane induced by centrifugal distortion have been measured with an unprecedented frequency accuracy using a THz photomixing synthesizer based on a frequency comb. Compared to previous synchrotron based FT-Far-IR measurements of Boudon et al. (Ref. [1]), the accuracy of the line frequency measurements is improved by one order of magnitude; this yields a corresponding increase of two orders of magnitude to the weighting of these transitions in the global fit. The rotational transitions in the ν4 ←ν4 hot band are measured for the first time by the broad spectral coverage of the photomixing CW-THz spectrometer providing access up to R(5) transitions at 2.6 THz. The new global fit including the present lines has been used to update the methane line list of the HITRAN database. Some small, but significant variations of the parameter values are observed and are accompanied by a reduction of the 1-σ uncertainties on the rotational (B0) and centrifugal distortion (D0) constants.

Access to DNA and protein databases on the Internet.

Science.gov (United States)

Harper, R

1994-02-01

During the past year, the number of biological databases that can be queried via Internet has dramatically increased. This increase has resulted from the introduction of networking tools, such as Gopher and WAIS, that make it easy for research workers to index databases and make them available for on-line browsing. Biocomputing in the nineties will see the advent of more client/server options for the solution of problems in bioinformatics.

Proposal for a high-energy nuclear database

International Nuclear Information System (INIS)

Brown, D.A.; Vogt, R.

2006-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews. (author)

Proposal for a High Energy Nuclear Database

International Nuclear Information System (INIS)

Brown, D A; Vogt, R

2005-01-01

The authors propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, they propose periodically performing evaluations of the data and summarizing the results in topical reviews

A Serial Analysis of Gene Expression (SAGE) database analysis of chemosensitivity

DEFF Research Database (Denmark)

Stein, Wilfred D; Litman, Thomas; Fojo, Tito

2004-01-01

are their corresponding solid tumors. We used the Serial Analysis of Gene Expression (SAGE) database to identify differences between solid tumors and cell lines, hoping to detect genes that could potentially explain differences in drug sensitivity. SAGE libraries were available for both solid tumors and cell lines from...

Estimation of the Alpha Factor Parameters Using the ICDE Database

Energy Technology Data Exchange (ETDEWEB)

Kang, Dae Il; Hwang, M. J.; Han, S. H

2007-04-15

Detailed common cause failure (CCF) analysis generally need for the data for CCF events of other nuclear power plants because the CCF events rarely occur. KAERI has been participated at the international common cause failure data exchange (ICDE) project to get the data for the CCF events. The operation office of the ICDE project sent the CCF event data for EDG to the KAERI at December 2006. As a pilot study, we performed the detailed CCF analysis of EDGs for Yonggwang Units 3 and 4 and Ulchin Units 3 and 4 using the ICDE database. There are two onsite EDGs for each NPP. When an offsite power and the two onsite EDGs are not available, one alternate AC (AAC) diesel generator (hereafter AAC) is provided. Two onsite EDGs and the AAC are manufactured by the same company, but they are designed differently. We estimated the Alpha Factor and the CCF probability for the cases where three EDGs were assumed to be identically designed, and for those were assumed to be not identically designed. For the cases where three EDGs were assumed to be identically designed, double CCF probabilities of Yonggwang Units 3/4 and Ulchin Units 3/4 for 'fails to start' were estimated as 2.20E-4 and 2.10E-4, respectively. Triple CCF probabilities of those were estimated as 2.39E-4 and 2.42E-4, respectively. As each NPP has no experience for 'fails to run', Yonggwang Units 3/4 and Ulchin Units 3/4 have the same CCF probability. The estimated double and triple CCF probabilities for 'fails to run' are 4.21E-4 and 4.61E-4, respectively. Quantification results show that the system unavailability for the cases where the three EDGs are identical is higher than that where the three EDGs are different. The estimated system unavailability of the former case was increased by 3.4% comparing with that of the latter. As a future study, a computerization work for the estimations of the CCF parameters will be performed.

Practice databases and their uses in clinical research.

Science.gov (United States)

Tierney, W M; McDonald, C J

1991-04-01

A few large clinical information databases have been established within larger medical information systems. Although they are smaller than claims databases, these clinical databases offer several advantages: accurate and timely data, rich clinical detail, and continuous parameters (for example, vital signs and laboratory results). However, the nature of the data vary considerably, which affects the kinds of secondary analyses that can be performed. These databases have been used to investigate clinical epidemiology, risk assessment, post-marketing surveillance of drugs, practice variation, resource use, quality assurance, and decision analysis. In addition, practice databases can be used to identify subjects for prospective studies. Further methodologic developments are necessary to deal with the prevalent problems of missing data and various forms of bias if such databases are to grow and contribute valuable clinical information.

Software for creating quality control database in diagnostic radiology

International Nuclear Information System (INIS)

Stoeva, M.; Spassov, G.; Tabakov, S.

2000-01-01

The paper describes a PC based program with database for quality control (QC). It keeps information about all surveyed equipment and measured parameters. The first function of the program is to extract information from old (existing) MS Excel spreadsheets with QC surveys. The second function is used for input of measurements which are automatically organized in MS Excel spreadsheets and built into the database. The spreadsheets are based on the protocols described in the EMERALD Training Scheme. In addition, the program can make statistics of all measured parameters, both in absolute term and in time

SM-ROM-GL (Strong Motion Romania Ground Level Database

Directory of Open Access Journals (Sweden)

Ioan Sorin BORCIA

2015-07-01

Full Text Available The SM-ROM-GL database includes data obtained by the processing of records performed at ground level by the Romanian seismic networks, namely INCERC, NIEP, NCSRR and ISPH-GEOTEC, during recent seismic events with moment magnitude Mw ≥ 5 and epicenters located in Romania. All the available seismic records were re-processed using the same basic software and the same procedures and options (filtering and baseline correction, in order to obtain a consistent dataset. The database stores computed parameters of seismic motions, i.e. peak values: PGA, PGV, PGD, effective peak values: EPA, EPV, EPD, control periods, spectral values of absolute acceleration, relative velocity and relative displacement, as well as of instrumental intensity (as defined bz Sandi and Borcia in 2011. The fields in the database include: coding of seismic events, stations and records, a number of associated fields (seismic event source parameters, geographical coordinates of seismic stations, links to the corresponding ground motion records, charts of the response spectra of absolute acceleration, relative velocity, relative displacement and instrumental intensity, as well as some other representative parameters of seismic motions. The conception of the SM-ROM-GL database allows for an easy maintenance; such that elementary knowledge of Microsoft Access 2000 is sufficient for its operation.

Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

Informatics derived materials databases for multifunctional properties

International Nuclear Information System (INIS)

Broderick, Scott; Rajan, Krishna

2015-01-01

In this review, we provide an overview of the development of quantitative structure–property relationships incorporating the impact of data uncertainty from small, limited knowledge data sets from which we rapidly develop new and larger databases. Unlike traditional database development, this informatics based approach is concurrent with the identification and discovery of the key metrics controlling structure–property relationships; and even more importantly we are now in a position to build materials databases based on design ‘intent’ and not just design parameters. This permits for example to establish materials databases that can be used for targeted multifunctional properties and not just one characteristic at a time as is presently done. This review provides a summary of the computational logic of building such virtual databases and gives some examples in the field of complex inorganic solids for scintillator applications. (review)

The Flux Database Concerted Action (invited paper)

International Nuclear Information System (INIS)

Mitchell, N.G.; Donnelly, C.E.

2000-01-01

The background to the IUR action on the development of a flux database for radionuclide transfer in soil-plant systems is summarised. The action is discussed in terms of the objectives, the deliverables and the progress achieved by the flux database working group. The paper describes the background to the current initiative, outlines specific features of the database and supporting documentation, and presents findings from the working group's activities. The aim of the IUR flux database working group is to bring together researchers to collate data from current experimental studies investigating aspects of radionuclide transfer in soil-plant systems. The database will incorporate parameters describing the time-dependent transfer of radionuclides between soil, plant and animal compartments. Work under the EC Concerted Action considers soil-plant interactions. This initiative has become known as the radionuclide flux database. It is emphasised that the word flux is used in this case simply to indicate the flow of radionuclides between compartments in time. (author)

Experience using a distributed object oriented database for a DAQ system

International Nuclear Information System (INIS)

Bee, C.P.; Eshghi, S.; Jones, R.

1996-01-01

To configure the RD13 data acquisition system, we need many parameters which describe the various hardware and software components. Such information has been defined using an entity-relation model and stored in a commercial memory-resident database. during the last year, Itasca, an object oriented database management system (OODB), was chosen as a replacement database system. We have ported the existing databases (hs and sw configurations, run parameters etc.) to Itasca and integrated it with the run control system. We believe that it is possible to use an OODB in real-time environments such as DAQ systems. In this paper, we present our experience and impression: why we wanted to change from an entity-relational approach, some useful features of Itasca, the issues we meet during this project including integration of the database into an existing distributed environment and factors which influence performance. (author)

The On Line Management of the Degraded Locations within Built Up Areas

Directory of Open Access Journals (Sweden)

Eugenia Iancu

2008-01-01

Full Text Available The present work presents the accomplishmentswithin the research project CEEX „Telematic system for theon line management of the degraded within built up areas –ZoneMAP” in the program INFOSOC between 15.09.2006-31.10.2007. The authors of the present article are part of thecommittee of accomplishment of the project. The generalobjective of the project ZoneMAP consists of the system forthe management and the on line monitoring of the degradedwithin the built up areas due to the uncontrolled wastestoring, by elaborating an electronic system of geographicalpositioning GPS/GIS.The general objective of the ZoneMAP project consists indrawing up a telematic system regarding the monitoring ofthe areas affected by the uncontrollable waste storing byusing the newest informational and communicationaltechnologies through the elaboration of a GPS/GIS electronicgeographical positioning system.The system for on-line management of the affectedlocations within the built up areas are defined the followingdata categories: data regarding the waste management(monitored locations within the built up areas, waste,pollution sources, waste stores, waste processing stations,data regarding the environment protection (environmentalquality parameters: water, air, soil, spatial data (thematicmaps.Through the automatic collection of the data regarding theenvironment, the meteorology and the ecology it is aiming atthe realization of a monitoring system, equipped with sensorsand/or translators capable of measuring and translating (intoelectrical signals measures with meteorological character(such as: the intensity of the solar radiation, temperature,humidity but also state measures of the ecological system(such as: the concentration of nutrients in water and soil, thepollution in water, air and soil, biomasses. The collectedmeasures will have to be converted into numerical valuesthat will be stored in the database of the system.The system’s database is distributed on

Upgrade of laser and electron beam welding database

CERN Document Server

Furman, Magdalena

2014-01-01

The main purpose of this project was to fix existing issues and update the existing database holding parameters of laser-beam and electron-beam welding machines. Moreover, the database had to be extended to hold the data for the new machines that arrived recently at the workshop. As a solution - the database had to be migrated to Oracle framework, the new user interface (using APEX) had to be designed and implemented with the integration with the CERN web services (EDMS, Phonebook, JMT, CDD and EDH).

The sensitivity of radiative transfer calculations to the changes in the HITRAN database from 1982 to 2004

International Nuclear Information System (INIS)

Kratz, David P.

2008-01-01

Over the last quarter century, improvements in the determination of the spectroscopic characteristics of the infrared-active trace species have enhanced our ability to retrieve quantitative distributions of temperatures, clouds, and abundances for various trace species within the Earth's atmosphere. These improvements have also allowed for refinements in the estimates of climatic effects attributed to changes in the Earth's atmospheric composition. Modeling efforts, however, have frequently experienced significant delays in assimilating improved spectroscopic information. Such is the case for highly parameterized models, where considerable effort is typically required to incorporate any revisions. Thus, a line-by-line radiative transfer model has been used to investigate the magnitude of the effects resulting from modifications to the spectroscopic information. Calculations from this line-by-line model have demonstrated that recent modifications to the HITRAN (High Resolution Transmission) line parameters, the continuum formulation, and the CO 2 line-mixing formulation can significantly affect the interpretation of the high spectral resolution radiance and brightness temperature retrievals. For certain moderate-resolution satellite remote sensing channels, modifications to these spectroscopic parameters and formulations have shown the capacity to induce changes in the calculated radiances equivalent to brightness temperature differences of 1-2 K. Model calculations have further shown that modifications of the spectroscopic characteristics tend to have a modest effect on the determination of spectrally integrated radiances, fluxes, and radiative forcing estimates, with the largest differences being of order 1 W m -2 for the total thermal infrared fluxes, and of order 2-3% of the calculated radiative forcing at the tropopause attributed to the combined doubling of CO 2 , N 2 O, and CH 4 . The results from this investigation are intended to function as a guide to

Study of electroweak parameters at LEP

International Nuclear Information System (INIS)

Blum, W.

1991-10-01

The measurement of the line shape and asymmetry parameters of the Z 0 in its leptonic and hadronic decays are reviewed. Progress is reported about a considerable increase in measurement accuracy. Several tests of the Standard Model confirm it to better than one per cent. New values for the effective mixing parameter are derived from the line shape parameters averaged over the four LEP experiments. The corresponding limits on the top mass are presented. (orig.)

Conceptual design of nuclear power plants database system

International Nuclear Information System (INIS)

Ishikawa, Masaaki; Izumi, Fumio; Sudoh, Takashi.

1984-03-01

This report is the result of the joint study on the developments of the nuclear power plants database system. The present conceptual design of the database system, which includes Japanese character processing and image processing, has been made on the data of safety design parameters mainly found in the application documents for reactor construction permit made available to the public. (author)

Database Description - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Trypanosomes Database Database Description General information of database Database name Trypanosomes Database...stitute of Genetics Research Organization of Information and Systems Yata 1111, Mishima, Shizuoka 411-8540, JAPAN E mail: Database...y Name: Trypanosoma Taxonomy ID: 5690 Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database description The... Article title: Author name(s): Journal: External Links: Original website information Database maintenance s...DB (Protein Data Bank) KEGG PATHWAY Database DrugPort Entry list Available Query search Available Web servic

A dedicated on-line system for the preparation and validation of standard beads in XRF analysis

International Nuclear Information System (INIS)

Yamamoto, Yasuyuki; Ogasawara, Noriko; Nakata, Akio; Shoji, Shizuko.

1995-01-01

A dedicated on-line system in X-ray Fluorescence (XRF) analysis with glass-bead method was developed in which preparation of standard beads was automated including proper choice of reagents, assignment of bead compositions and validation of the prepared beads. This system features: a. Fundamental Parameter (FP) Method for validation of standard beads. b. An original database of high purity reagents for standards. c. Automatic calculation of suitable composition for each standard bead, by giving a range for each element and the number of standard beads. 1) The calculation is based on random numbers, and makes a random assignment of composition for each bead. 2) The calculation results are automatically stored in a computer as a condition file for quantitative analysis. 3) An amount of a material for a standard mixture is corrected if a valence or a chemical compound for an analysis element is different from that of the standard material in the database. In order to realize these features, many high purity reagents were examined for their purities and other characteristics to test a suitability to use for a standard material, and a software for on-line processings was originally developed. (author)

On-line atomic data access

Energy Technology Data Exchange (ETDEWEB)

Schultz, D.R. [Oak Ridge National Lab., TN (United States); Nash, J.K. [Lawrence Livermore National Lab., CA (United States)

1996-04-01

The need for atomic data is one which continues to expand in a wide variety of applications including fusion energy, astrophysics, laser- produced plasma research, and plasma processing. Modern computer database and communications technology nables this data to be placed on-line and obtained by users of the Internet. Presented here is a summary of the observations and conclusions regarding such on-line atomic data access derived from a forum held at the Tenth APS Topical Conference on Atomic Processes in Plasmas.

Design and implementation of the ITPA confinement profile database

Energy Technology Data Exchange (ETDEWEB)

Walters, Malcolm E-mail: malcolm.walters@ukaea.org.uk; Roach, Colin

2004-06-01

One key goal of the fusion program is to improve the accuracy of physics models in describing existing experiments, so as to make better predictions of the performance of future fusion devices. To support this goal, databases of experimental results from multiple machines have been assembled to facilitate the testing of physics models over a wide range of operating conditions and plasma parameters. One such database was the International Multi-Tokamak Profile Database. This database has more recently been substantially revamped to exploit newer technologies, and is now known as the ITPA confinement profile database http://www.tokamak-profiledb.ukaea.org.uk. The overall design of the updated system will be outlined and the implementation of the relational database part will be described in detail.

Selected topics on data and databases

International Nuclear Information System (INIS)

Ralchenko, Y.

2001-01-01

Dr. Ralchenko reviewed atomic data activities at the WIS Plasma Laboratory. Physical sputtering yields over the broad energy range for fusion is presented. Collisional database including electron and heavy particle projectiles was completed. Quantum-mechanical calculations for the process of Stark broadening of atomic spectral lines are continued. Systems considered include data for Be-like ions and lithium-like ions

Selected topics on data and databases

Energy Technology Data Exchange (ETDEWEB)

Ralchenko, Y [Weizmann Institute of Science, Rehovot (Israel)

2001-12-01

Dr. Ralchenko reviewed atomic data activities at the WIS Plasma Laboratory. Physical sputtering yields over the broad energy range for fusion is presented. Collisional database including electron and heavy particle projectiles was completed. Quantum-mechanical calculations for the process of Stark broadening of atomic spectral lines are continued. Systems considered include data for Be-like ions and lithium-like ions.

Perbandingan Post Stack TIME Migration Metode Finite Difference dan Metode Kirchoff dengan Parameter Gap Dekonvolusi Data Seismik Darat 2d Line “Srda”

OpenAIRE

Dynza Anggary, Sheyza Rery; Danusaputro, Hernowo; Harmoko, Udi

2015-01-01

Analysis on Post Stack Time Migration (Post-STM) with finite difference method and Kirchoff method with determine gap parameter on deconvolution after stack had been applied to 2D land seismic at line “SRDA”. This research had purpose to applied seismic data processing to get subsurface imaging with high signal-to-noise ratio and analyze how the gap parameter corresponding on deconvolution after stack, and to determine which the appropriate method of migration between migration finite differe...

Database Description - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us SKIP Stemcell Database Database Description General information of database Database name SKIP Stemcell Database...rsity Journal Search: Contact address http://www.skip.med.keio.ac.jp/en/contact/ Database classification Human Genes and Diseases Dat...abase classification Stemcell Article Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database...ks: Original website information Database maintenance site Center for Medical Genetics, School of medicine, ...lable Web services Not available URL of Web services - Need for user registration Not available About This Database Database

Database Description - Arabidopsis Phenome Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Arabidopsis Phenome Database Database Description General information of database Database n... BioResource Center Hiroshi Masuya Database classification Plant databases - Arabidopsis thaliana Organism T...axonomy Name: Arabidopsis thaliana Taxonomy ID: 3702 Database description The Arabidopsis thaliana phenome i...heir effective application. We developed the new Arabidopsis Phenome Database integrating two novel database...seful materials for their experimental research. The other, the “Database of Curated Plant Phenome” focusing

Self-tuning wireless power transmission scheme based on on-line scattering parameters measurement and two-side power matching.

Science.gov (United States)

Luo, Yanting; Yang, Yongmin; Chen, Zhongsheng

2014-04-10

Sub-resonances often happen in wireless power transmission (WPT) systems using coupled magnetic resonances (CMR) due to environmental changes, coil movements or component degradations, which is a serious challenge for high efficiency power transmission. Thus self-tuning is very significant to keep WPT systems following strongly magnetic resonant conditions in practice. Traditional coupled-mode ways is difficult to solve this problem. In this paper a two-port power wave model is presented, where power matching and the overall systemic power transmission efficiency are firstly defined by scattering (S) parameters. Then we propose a novel self-tuning scheme based on on-line S parameters measurements and two-side power matching. Experimental results testify the feasibility of the proposed method. These findings suggest that the proposed method is much potential to develop strongly self-adaptive WPT systems with CMR.

Line parameters of methanol (CH3OH) at 10 microns

Science.gov (United States)

Lees, R. M.; Xu, L.-H.; Wang, P.; Brown, L. R.; Kleiner, I.; Johns, J. W. C.

2003-05-01

Laboratory spectra of methanol have been measured at high resolution and analyzed to provide spectroscopic information required for astrophysics and solar system studies. Line positions and quantum assignments have been obtained using spectra recorded at 0.002 cm-1 resolution using a modified Bomem DA3,002 spectrometer. Line intensities have been retrieved using laboratory scans from the McMath-Pierce Fourier-transform spectrometer located at the National Solar Observatory. The 10 micron region methanol absorption arises mainly from the fundamental CO-stretch mode (nu8) at 1033 cm-1, along with occasional transitions perturbed in the region by several nearby interacting states of the methyl rock (nu7), methyl bends (nu5, nu10, nu4) and the OH-bending (nu6) in combination with the torsion (nu12). Overall, the nu8 CO-stretch mode follows the traditional torsion-rotational pattern. We modeled the line positions and intensities for the CO-stretch mode with the one-dimensional torsional Hamiltonian and produced a HITRAN line list for cometary studies. The research described in this paper was carried out by the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration. RML and LHXu wish to acknowledge financial support from the Natural Sciences and Engineering Research Council of Canada. IK would like to thank the French Programme National de Planétologie (PNP) for funding this research.

On-line measurement of mechanical, optical properties and roughness parameters

Directory of Open Access Journals (Sweden)

Hartman, H.

2005-12-01

Full Text Available On-line measurements become a central importance for the control of production line output. The target is to replace traditional single local destructive quality checks by a continuous survey of the product properties. Other traditional like pyrometric temperature measurements suffer of well-known but non-soluble weakness points. New methods need the unambiguous correlation with the results of traditional testing to be representative for valid proof standards.EKO Stahl GmbH introduces several methods of on-line measurements focused actually on temperature measurement means of FTIR-Spectrometer, prediction of the mechanical properties of steel strips using the information of residual magnetization after a magnetization pulse and optical roughness measurements. The correlation between the results of the new methods and the classical proof processes has been established in a satisfactory manner.

Las medidas on line van tomando una importancia central para el control de la calidad de la producción . El objetivo es reemplazar las pruebas destructivas puntuales tradicionales por un control continuo de las características del producto. Otros métodos tradicionales, como la medida de la temperatura con pirómetros, adolecen de conocidos pero insolubles puntos débiles. Los nuevos métodos necesitan la correlación inequívoca con los resultados de los métodos corrientes clásicos para obtener la autoridad de un estándar de prueba. La EKO Stahl GmbH ha introducido varios métodos de medidas on line y actualmente concentrados en la medida de la temperatura con espectrómetro FTIR, predicción de las características mecánicas usando la información del magnetismo residual, a partir de un impulso magnético inicial así como la medida óptica de la rugosidad. La correlación entre los resultados de los nuevos métodos y los métodos clásicos ha quedado establecida de manera satisfactoria.

A Bayesian Network Schema for Lessening Database Inference

National Research Council Canada - National Science Library

Chang, LiWu; Moskowitz, Ira S

2001-01-01

.... The authors introduce a formal schema for database inference analysis, based upon a Bayesian network structure, which identifies critical parameters involved in the inference problem and represents...

Creating Large Scale Database Servers

International Nuclear Information System (INIS)

Becla, Jacek

2001-01-01

The BaBar experiment at the Stanford Linear Accelerator Center (SLAC) is designed to perform a high precision investigation of the decays of the B-meson produced from electron-positron interactions. The experiment, started in May 1999, will generate approximately 300TB/year of data for 10 years. All of the data will reside in Objectivity databases accessible via the Advanced Multi-threaded Server (AMS). To date, over 70TB of data have been placed in Objectivity/DB, making it one of the largest databases in the world. Providing access to such a large quantity of data through a database server is a daunting task. A full-scale testbed environment had to be developed to tune various software parameters and a fundamental change had to occur in the AMS architecture to allow it to scale past several hundred terabytes of data. Additionally, several protocol extensions had to be implemented to provide practical access to large quantities of data. This paper will describe the design of the database and the changes that we needed to make in the AMS for scalability reasons and how the lessons we learned would be applicable to virtually any kind of database server seeking to operate in the Petabyte region

Creating Large Scale Database Servers

Energy Technology Data Exchange (ETDEWEB)

Becla, Jacek

2001-12-14

The BaBar experiment at the Stanford Linear Accelerator Center (SLAC) is designed to perform a high precision investigation of the decays of the B-meson produced from electron-positron interactions. The experiment, started in May 1999, will generate approximately 300TB/year of data for 10 years. All of the data will reside in Objectivity databases accessible via the Advanced Multi-threaded Server (AMS). To date, over 70TB of data have been placed in Objectivity/DB, making it one of the largest databases in the world. Providing access to such a large quantity of data through a database server is a daunting task. A full-scale testbed environment had to be developed to tune various software parameters and a fundamental change had to occur in the AMS architecture to allow it to scale past several hundred terabytes of data. Additionally, several protocol extensions had to be implemented to provide practical access to large quantities of data. This paper will describe the design of the database and the changes that we needed to make in the AMS for scalability reasons and how the lessons we learned would be applicable to virtually any kind of database server seeking to operate in the Petabyte region.

Recent Developments in the NIST Atomic Databases

Science.gov (United States)

Kramida, Alexander

2011-05-01

New versions of the NIST Atomic Spectra Database (ASD, v. 4.0) and three bibliographic databases (Atomic Energy Levels and Spectra, v. 2.0, Atomic Transition Probabilities, v. 9.0, and Atomic Line Broadening and Shapes, v. 3.0) have recently been released. In this contribution I will describe the main changes in the way users get the data through the Web. The contents of ASD have been significantly extended. In particular, the data on highly ionized tungsten (W III-LXXIV) have been added from a recently published NIST compilation. The tables for Fe I and Fe II have been replaced with newer, much more extensive lists (10000 lines for Fe I). The other updated or new spectra include H, D, T, He I-II, Li I-III, Be I-IV, B I-V, C I-II, N I-II, O I-II, Na I-X, K I-XIX, and Hg I. The new version of ASD now incorporates data on isotopes of several elements. I will describe some of the issues the NIST ASD Team faces when updating the data.

Recent Developments in the NIST Atomic Databases

International Nuclear Information System (INIS)

Kramida, Alexander

2011-01-01

New versions of the NIST Atomic Spectra Database (ASD, v. 4.0) and three bibliographic databases (Atomic Energy Levels and Spectra, v. 2.0, Atomic Transition Probabilities, v. 9.0, and Atomic Line Broadening and Shapes, v. 3.0) have recently been released. In this contribution I will describe the main changes in the way users get the data through the Web. The contents of ASD have been significantly extended. In particular, the data on highly ionized tungsten (W III-LXXIV) have been added from a recently published NIST compilation. The tables for Fe I and Fe II have been replaced with newer, much more extensive lists (10000 lines for Fe I). The other updated or new spectra include H, D, T, He I-II, Li I-III, Be I-IV, B I-V, C I-II, N I-II, O I-II, Na I-X, K I-XIX, and Hg I. The new version of ASD now incorporates data on isotopes of several elements. I will describe some of the issues the NIST ASD Team faces when updating the data.

CMS experience with online and offline Databases

CERN Multimedia

CERN. Geneva

2012-01-01

The CMS experiment is made of many detectors which in total sum up to more than 75 million channels. The online database stores the configuration data used to configure the various parts of the detector and bring it in all possible running states. The database also stores the conditions data, detector monitoring parameters of all channels (temperatures, voltages), detector quality information, beam conditions, etc. These quantities are used by the experts to monitor the detector performance in detail, as they occupy a very large space in the online database they cannot be used as-is for offline data reconstruction. For this, a "condensed" set of the full information, the "conditions data", is created and copied to a separate database used in the offline reconstruction. The offline conditions database contains the alignment and calibrations data for the various detectors. Conditions data sets are accessed by a tag and an interval of validity through the offline reconstruction program CMSSW, written in C++. Pe...

eXtended CASA Line Analysis Software Suite (XCLASS)

Science.gov (United States)

Möller, T.; Endres, C.; Schilke, P.

2017-02-01

The eXtended CASA Line Analysis Software Suite (XCLASS) is a toolbox for the Common Astronomy Software Applications package (CASA) containing new functions for modeling interferometric and single dish data. Among the tools is the myXCLASS program which calculates synthetic spectra by solving the radiative transfer equation for an isothermal object in one dimension, whereas the finite source size and dust attenuation are considered as well. Molecular data required by the myXCLASS program are taken from an embedded SQLite3 database containing entries from the Cologne Database for Molecular Spectroscopy (CDMS) and JPL using the Virtual Atomic and Molecular Data Center (VAMDC) portal. Additionally, the toolbox provides an interface for the model optimizer package Modeling and Analysis Generic Interface for eXternal numerical codes (MAGIX), which helps to find the best description of observational data using myXCLASS (or another external model program), that is, finding the parameter set that most closely reproduces the data. http://www.astro.uni-koeln.de/projects/schilke/myXCLASSInterface A copy of the code is available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/598/A7

Genetic parameters and genetic trends in the Chinese × European Tiameslan composite pig line. I. Genetic parameters

Directory of Open Access Journals (Sweden)

Legault Christian

2000-01-01

Full Text Available Abstract Genetic parameters of body weight at 4 (W4 w, 8 (W8 w and 22 (W22 w weeks of age, days from 20 to 100 kg (DT, average backfat thickness at 100 kg (ABT, teat number (TEAT, number of good teats (GTEAT, total number of piglets born (TNB, born alive (NBA and weaned (NW per litter, and birth to weaning survival rate (SURV were estimated in the Chinese × European Tiameslan composite line using restricted maximum likelihood methodology applied to a multiple trait animal model. Performance data from a total of 4 881 males and 4 799 females from 1 341 litters were analysed. Different models were fitted to the data in order to estimate the importance of maternal effects on production traits, as well as genetic correlations between male and female performance. The results showed the existence of significant maternal effects on W4w, W8w and ABT and of variance heterogeneity between sexes for W22w, DT, ABT and GTEAT. Genetic correlations between sexes were 0.79, 0.71 and 0.82, respectively, for W22w, DT and ABT and above 0.90 for the other traits. Heritability estimates were larger than (ABT and TEAT or similar to (other traits average literature values. Some genetic antagonism was evidenced between production traits, particularly W4w, W8w and ABT, and reproductive traits.

The JANA calibrations and conditions database API

International Nuclear Information System (INIS)

Lawrence, David

2010-01-01

Calibrations and conditions databases can be accessed from within the JANA Event Processing framework through the API defined in its JCalibration base class. The API is designed to support everything from databases, to web services to flat files for the backend. A Web Service backend using the gSOAP toolkit has been implemented which is particularly interesting since it addresses many modern cybersecurity issues including support for SSL. The API allows constants to be retrieved through a single line of C++ code with most of the context, including the transport mechanism, being implied by the run currently being analyzed and the environment relieving developers from implementing such details.

The JANA calibrations and conditions database API

Energy Technology Data Exchange (ETDEWEB)

Lawrence, David, E-mail: davidl@jlab.or [12000 Jefferson Ave., Suite 8, Newport News, VA 23601 (United States)

2010-04-01

Calibrations and conditions databases can be accessed from within the JANA Event Processing framework through the API defined in its JCalibration base class. The API is designed to support everything from databases, to web services to flat files for the backend. A Web Service backend using the gSOAP toolkit has been implemented which is particularly interesting since it addresses many modern cybersecurity issues including support for SSL. The API allows constants to be retrieved through a single line of C++ code with most of the context, including the transport mechanism, being implied by the run currently being analyzed and the environment relieving developers from implementing such details.

New model for distributed multimedia databases and its application to networking of museums

Science.gov (United States)

Kuroda, Kazuhide; Komatsu, Naohisa; Komiya, Kazumi; Ikeda, Hiroaki

1998-02-01

This paper proposes a new distributed multimedia data base system where the databases storing MPEG-2 videos and/or super high definition images are connected together through the B-ISDN's, and also refers to an example of the networking of museums on the basis of the proposed database system. The proposed database system introduces a new concept of the 'retrieval manager' which functions an intelligent controller so that the user can recognize a set of image databases as one logical database. A user terminal issues a request to retrieve contents to the retrieval manager which is located in the nearest place to the user terminal on the network. Then, the retrieved contents are directly sent through the B-ISDN's to the user terminal from the server which stores the designated contents. In this case, the designated logical data base dynamically generates the best combination of such a retrieving parameter as a data transfer path referring to directly or data on the basis of the environment of the system. The generated retrieving parameter is then executed to select the most suitable data transfer path on the network. Therefore, the best combination of these parameters fits to the distributed multimedia database system.

Design and implementation of a biomedical image database (BDIM).

Science.gov (United States)

Aubry, F; Badaoui, S; Kaplan, H; Di Paola, R

1988-01-01

We developed a biomedical image database (BDIM) which proposes a standardized representation of value arrays such as images and curves, and of their associated parameters, independently of their acquisition mode to make their transmission and processing easier. It includes three kinds of interactions, oriented to the users. The network concept was kept as a constraint to incorporate the BDIM in a distributed structure and we maintained compatibility with the ACR/NEMA communication protocol. The management of arrays and their associated parameters includes two distinct bases of objects, linked together via a gateway. The first one manages arrays according to their storage mode: long term storage on optionally on-line mass storage devices, and, for consultations, partial copies of long term stored arrays on hard disk. The second one manages the associated parameters and the gateway by means of the relational DBMS ORACLE. Parameters are grouped into relations. Some of them are in agreement with groups defined by the ACR/NEMA. The other relations describe objects resulting from processed initial objects. These new objects are not described by the ACR/NEMA but they can be inserted as shadow groups of ACR/NEMA description. The relations describing the storage and their pathname constitute the gateway. ORACLE distributed tools and the two-level storage technique will allow the integration of the BDIM into a distributed structure, Queries and array (alone or in sequences) retrieval module has access to the relations via a level in which a dictionary managed by ORACLE is included. This dictionary translates ACR/NEMA objects into objects that can be handled by the DBMS.(ABSTRACT TRUNCATED AT 250 WORDS)

The relational clinical database: a possible solution to the star wars in registry systems.

Science.gov (United States)

Michels, D K; Zamieroski, M

1990-12-01

In summary, having data from other service areas available in a relational clinical database could resolve many of the problems existing in today's registry systems. Uniting sophisticated information systems into a centralized database system could definitely be a corporate asset in managing the bottom line.

Designing a database for performance assessment: Lessons learned from WIPP

International Nuclear Information System (INIS)

Martell, M.A.; Schenker, A.

1997-01-01

The Waste Isolation Pilot Plant (WIPP) Compliance Certification Application (CCA) Performance Assessment (PA) used a relational database that was originally designed only to supply the input parameters required for implementation of the PA codes. Reviewers used the database as a point of entry to audit quality assurance measures for control, traceability, and retrievability of input information used for analysis, and output/work products. During these audits it became apparent that modifications to the architecture and scope of the database would benefit the EPA regulator and other stakeholders when reviewing the recertification application. This paper contains a discussion of the WPP PA CCA database and lessons learned for designing a database

Árvore de decisão aplicada em dados de incubação de matrizes de postura Hy-Line W36 Decision tree applied to hatchery databases of Hy-Line W-36

Directory of Open Access Journals (Sweden)

Marcelo Gomes Ferreira Lima

2010-12-01

Full Text Available Incubatório de ovos é um setor de grande importância na Avicultura de postura. Com a redução dos custos dos equipamentos de informática cresce o armazenamento de dados para gerenciamento do processo produtivo. A Mineração de Dados surge como uma técnica para identificar conhecimentos novos e úteis nos bancos de dados. Objetivou-se, neste trabalho, explorar a técnica Arvore de Decisão em banco de dados de incubatórios de matrizes de postura, visando a elaboração de padrões de incubação. Foram disponibilizados, pela empresa Hy-Line do Brasil Ltda, dados de incubação entre os anos de 2002 e 2006 da linhagem Hy-Line W-36. Dois experimentos foram realizados. Em um deles, valores acima dos estabelecidos pela empresa como desejado para o índice "fêmeas nascidas vendáveis" foram identificados como relevantes para a geração das regras. No outro, valores abaixo dos estabelecidos pela empresa foram identificados como relevantes para a geração das regras. Foi utilizado o algoritmo Entropia C 4.5 e o software SAS-Enterprise Miner como ferramenta de análise . Como conclusão deste estudo, foi possível observar que com a técnica estudada, os dados utilizados no gerenciamento de produção são suficientes para identificar conhecimentos novos, úteis e aplicáveis a fim de melhorar a produtividade das empresas incubadoras, atendendo à demanda com diminuição do desperdício.Hatchery is a very important sector in egg production. As computers become cheaper, there is an increase in data storage for the production management process. Data Mining has appeared as a technique to identify new and useful knowledge in databases. The objective of this work was to explore the Decision Tree technique in hatchery databases to identify the best standards of the incubation process. The data set used in this research was supplied by Hy-Line do Brasil Ltda., corresponding to the incubation period of 2002-2006, from the strain Hy-line W-36. Two

The Danish Head and Neck Cancer database

DEFF Research Database (Denmark)

Overgaard, Jens; Jovanovic, Aleksandar; Godballe, Christian

2016-01-01

of continuous clinical trials and subsequent implementation in national guidelines. The database has furthermore been used to describe the effect of reduced waiting time, changed epidemiology, and influence of comorbidity and socioeconomic parameters. CONCLUSION: Half a century of registration of head and neck......AIM OF THE DATABASE: The Danish Head and Neck Cancer database is a nationwide clinical quality database that contains prospective data collected since the early 1960s. The overall aim of this study was to describe the outcome of the national strategy for multidisciplinary treatment of head and neck......) of cancer in the nasal sinuses, salivary glands, or thyroid gland (corresponding to the International Classification of Diseases, tenth revision, classifications C.01-C.11, C.30-C.32, C.73, and C.80). MAIN VARIABLES: The main variables used in the study were symptoms and the duration of the symptoms...

HOPE: An On-Line Piloted Handling Qualities Experiment Data Book

Science.gov (United States)

Jackson, E. B.; Proffitt, Melissa S.

2010-01-01

A novel on-line database for capturing most of the information obtained during piloted handling qualities experiments (either flight or simulated) is described. The Hyperlinked Overview of Piloted Evaluations (HOPE) web application is based on an open-source object-oriented Web-based front end (Ruby-on-Rails) that can be used with a variety of back-end relational database engines. The hyperlinked, on-line data book approach allows an easily-traversed way of looking at a variety of collected data, including pilot ratings, pilot information, vehicle and configuration characteristics, test maneuvers, and individual flight test cards and repeat runs. It allows for on-line retrieval of pilot comments, both audio and transcribed, as well as time history data retrieval and video playback. Pilot questionnaires are recorded as are pilot biographies. Simple statistics are calculated for each selected group of pilot ratings, allowing multiple ways to aggregate the data set (by pilot, by task, or by vehicle configuration, for example). Any number of per-run or per-task metrics can be captured in the database. The entire run metrics dataset can be downloaded in comma-separated text for further analysis off-line. It is expected that this tool will be made available upon request

DABAM: an open-source database of X-ray mirrors metrology

Energy Technology Data Exchange (ETDEWEB)

Sanchez del Rio, Manuel, E-mail: srio@esrf.eu [ESRF - The European Synchrotron, 71 Avenue des Martyrs, 38000 Grenoble (France); Bianchi, Davide [AC2T Research GmbH, Viktro-Kaplan-Strasse 2-C, 2700 Wiener Neustadt (Austria); Cocco, Daniele [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Glass, Mark [ESRF - The European Synchrotron, 71 Avenue des Martyrs, 38000 Grenoble (France); Idir, Mourad [NSLS II, Brookhaven National Laboratory, Upton, NY 11973-5000 (United States); Metz, Jim [InSync Inc., 2511C Broadbent Parkway, Albuquerque, NM 87107 (United States); Raimondi, Lorenzo; Rebuffi, Luca [Elettra-Sincrotrone Trieste SCpA, Basovizza (TS) (Italy); Reininger, Ruben; Shi, Xianbo [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Siewert, Frank [BESSY II, Helmholtz Zentrum Berlin, Institute for Nanometre Optics and Technology, Albert-Einstein-Strasse 15, 12489 Berlin (Germany); Spielmann-Jaeggi, Sibylle [Swiss Light Source at Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Takacs, Peter [Instrumentation Division, Brookhaven National Laboratory, Upton, NY 11973-5000 (United States); Tomasset, Muriel [Synchrotron Soleil (France); Tonnessen, Tom [InSync Inc., 2511C Broadbent Parkway, Albuquerque, NM 87107 (United States); Vivo, Amparo [ESRF - The European Synchrotron, 71 Avenue des Martyrs, 38000 Grenoble (France); Yashchuk, Valeriy [Advanced Light Source, Lawrence Berkeley National Laboratory, MS 15-R0317, 1 Cyclotron Road, Berkeley, CA 94720-8199 (United States)

2016-04-20

DABAM, an open-source database of X-ray mirrors metrology to be used with ray-tracing and wave-propagation codes for simulating the effect of the surface errors on the performance of a synchrotron radiation beamline. An open-source database containing metrology data for X-ray mirrors is presented. It makes available metrology data (mirror heights and slopes profiles) that can be used with simulation tools for calculating the effects of optical surface errors in the performances of an optical instrument, such as a synchrotron beamline. A typical case is the degradation of the intensity profile at the focal position in a beamline due to mirror surface errors. This database for metrology (DABAM) aims to provide to the users of simulation tools the data of real mirrors. The data included in the database are described in this paper, with details of how the mirror parameters are stored. An accompanying software is provided to allow simple access and processing of these data, calculate the most usual statistical parameters, and also include the option of creating input files for most used simulation codes. Some optics simulations are presented and discussed to illustrate the real use of the profiles from the database.

METRICS FOR DYNAMIC SCALING OF DATABASE IN CLOUDS

Directory of Open Access Journals (Sweden)

Alexander V. Boichenko

2013-01-01

Full Text Available This article analyzes the main methods of scaling databases (replication, sharding and their support at the popular relational databases and NoSQL solutions with different data models: a document-oriented, key-value, column-oriented, graph. The article provides an assessment of the capabilities of modern cloud-based solution and gives a model for the organization of dynamic scaling in the cloud infrastructure. In the article are analyzed different types of metrics and are included the basic metrics that characterize the functioning parameters and database technology, as well as sets the goals of the integral metrics, necessary for the implementation of adaptive algorithms for dynamic scaling databases in the cloud infrastructure. This article was prepared with the support of RFBR grant № 13-07-00749.

An improved rank based disease prediction using web navigation patterns on bio-medical databases

Directory of Open Access Journals (Sweden)

P. Dhanalakshmi

2017-12-01

Full Text Available Applying machine learning techniques to on-line biomedical databases is a challenging task, as this data is collected from large number of sources and it is multi-dimensional. Also retrieval of relevant document from large repository such as gene document takes more processing time and an increased false positive rate. Generally, the extraction of biomedical document is based on the stream of prior observations of gene parameters taken at different time periods. Traditional web usage models such as Markov, Bayesian and Clustering models are sensitive to analyze the user navigation patterns and session identification in online biomedical database. Moreover, most of the document ranking models on biomedical database are sensitive to sparsity and outliers. In this paper, a novel user recommendation system was implemented to predict the top ranked biomedical documents using the disease type, gene entities and user navigation patterns. In this recommendation system, dynamic session identification, dynamic user identification and document ranking techniques were used to extract the highly relevant disease documents on the online PubMed repository. To verify the performance of the proposed model, the true positive rate and runtime of the model was compared with that of traditional static models such as Bayesian and Fuzzy rank. Experimental results show that the performance of the proposed ranking model is better than the traditional models.

High value of the radiobiological parameter Dq correlates to expression of the transforming growth factor beta type II receptor in a panel of small cell lung cancer cell lines

DEFF Research Database (Denmark)

Hougaard, S; Krarup, M; Nørgaard, P

1998-01-01

Our panel of SCLC cell lines have previously been examined for their radiobiological characteristics and sensitivity to treatment with TGF beta 1. In this study we examined the possible correlations between radiobiological parameters and the expression of the TGF beta type II receptor (TGF beta......-rII). We have, in other studies, shown that the presence of TGF beta-rII was mandatory for transmitting the growth inhibitory effect of TGF beta. The results showed a statistically significant difference in Dq, i.e. the shoulder width of the survival curve, between cell lines expressing TGF beta......-rII and cell lines which did not express the receptor (P = 0.01). Cell lines expressing TGF beta-rII had a high Dq-value. TGF beta-rII expression did not correlate with any other radiobiological parameters. We suggest that an intact growth inhibitory pathway mediated by the TGF beta-rII may have a significant...

DENdb: database of integrated human enhancers

KAUST Repository

Ashoor, Haitham

2015-09-05

Enhancers are cis-acting DNA regulatory regions that play a key role in distal control of transcriptional activities. Identification of enhancers, coupled with a comprehensive functional analysis of their properties, could improve our understanding of complex gene transcription mechanisms and gene regulation processes in general. We developed DENdb, a centralized on-line repository of predicted enhancers derived from multiple human cell-lines. DENdb integrates enhancers predicted by five different methods generating an enriched catalogue of putative enhancers for each of the analysed cell-lines. DENdb provides information about the overlap of enhancers with DNase I hypersensitive regions, ChIP-seq regions of a number of transcription factors and transcription factor binding motifs, means to explore enhancer interactions with DNA using several chromatin interaction assays and enhancer neighbouring genes. DENdb is designed as a relational database that facilitates fast and efficient searching, browsing and visualization of information.

DENdb: database of integrated human enhancers

KAUST Repository

Ashoor, Haitham; Kleftogiannis, Dimitrios A.; Radovanovic, Aleksandar; Bajic, Vladimir B.

2015-01-01

Enhancers are cis-acting DNA regulatory regions that play a key role in distal control of transcriptional activities. Identification of enhancers, coupled with a comprehensive functional analysis of their properties, could improve our understanding of complex gene transcription mechanisms and gene regulation processes in general. We developed DENdb, a centralized on-line repository of predicted enhancers derived from multiple human cell-lines. DENdb integrates enhancers predicted by five different methods generating an enriched catalogue of putative enhancers for each of the analysed cell-lines. DENdb provides information about the overlap of enhancers with DNase I hypersensitive regions, ChIP-seq regions of a number of transcription factors and transcription factor binding motifs, means to explore enhancer interactions with DNA using several chromatin interaction assays and enhancer neighbouring genes. DENdb is designed as a relational database that facilitates fast and efficient searching, browsing and visualization of information.

THE EXTRAGALACTIC DISTANCE DATABASE

International Nuclear Information System (INIS)

Tully, R. Brent; Courtois, Helene M.; Jacobs, Bradley A.; Rizzi, Luca; Shaya, Edward J.; Makarov, Dmitry I.

2009-01-01

A database can be accessed on the Web at http://edd.ifa.hawaii.edu that was developed to promote access to information related to galaxy distances. The database has three functional components. First, tables from many literature sources have been gathered and enhanced with links through a distinct galaxy naming convention. Second, comparisons of results both at the levels of parameters and of techniques have begun and are continuing, leading to increasing homogeneity and consistency of distance measurements. Third, new material is presented arising from ongoing observational programs at the University of Hawaii 2.2 m telescope, radio telescopes at Green Bank, Arecibo, and Parkes and with the Hubble Space Telescope. This new observational material is made available in tandem with related material drawn from archives and passed through common analysis pipelines.

Predicting Minimum Control Speed on the Ground (VMCG) and Minimum Control Airspeed (VMCA) of Engine Inoperative Flight Using Aerodynamic Database and Propulsion Database Generators

Science.gov (United States)

Hadder, Eric Michael

There are many computer aided engineering tools and software used by aerospace engineers to design and predict specific parameters of an airplane. These tools help a design engineer predict and calculate such parameters such as lift, drag, pitching moment, takeoff range, maximum takeoff weight, maximum flight range and much more. However, there are very limited ways to predict and calculate the minimum control speeds of an airplane in engine inoperative flight. There are simple solutions, as well as complicated solutions, yet there is neither standard technique nor consistency throughout the aerospace industry. To further complicate this subject, airplane designers have the option of using an Automatic Thrust Control System (ATCS), which directly alters the minimum control speeds of an airplane. This work addresses this issue with a tool used to predict and calculate the Minimum Control Speed on the Ground (VMCG) as well as the Minimum Control Airspeed (VMCA) of any existing or design-stage airplane. With simple line art of an airplane, a program called VORLAX is used to generate an aerodynamic database used to calculate the stability derivatives of an airplane. Using another program called Numerical Propulsion System Simulation (NPSS), a propulsion database is generated to use with the aerodynamic database to calculate both VMCG and VMCA. This tool was tested using two airplanes, the Airbus A320 and the Lockheed Martin C130J-30 Super Hercules. The A320 does not use an Automatic Thrust Control System (ATCS), whereas the C130J-30 does use an ATCS. The tool was able to properly calculate and match known values of VMCG and VMCA for both of the airplanes. The fact that this tool was able to calculate the known values of VMCG and VMCA for both airplanes means that this tool would be able to predict the VMCG and VMCA of an airplane in the preliminary stages of design. This would allow design engineers the ability to use an Automatic Thrust Control System (ATCS) as part

Specification of parameters for development of a spatial database for drought monitoring and famine early warning in the African Sahel

Science.gov (United States)

Rochon, Gilbert L.

1989-01-01

Parameters were described for spatial database to facilitate drought monitoring and famine early warning in the African Sahel. The proposed system, referred to as the African Drought and Famine Information System (ADFIS) is ultimately recommended for implementation with the NASA/FEMA Spatial Analysis and Modeling System (SAMS), a GIS/Dymanic Modeling software package, currently under development. SAMS is derived from FEMA'S Integration Emergency Management Information System (IEMIS) and the Pacific Northwest Laborotory's/Engineering Topographic Laboratory's Airland Battlefield Environment (ALBE) GIS. SAMS is primarily intended for disaster planning and resource management applications with the developing countries. Sources of data for the system would include the Developing Economics Branch of the U.S. Dept. of Agriculture, the World Bank, Tulane University School of Public Health and Tropical Medicine's Famine Early Warning Systems (FEWS) Project, the USAID's Foreign Disaster Assistance Section, the World Resources Institute, the World Meterological Institute, the USGS, the UNFAO, UNICEF, and the United Nations Disaster Relief Organization (UNDRO). Satellite imagery would include decadal AVHRR imagery and Normalized Difference Vegetation Index (NDVI) values from 1981 to the present for the African continent and selected Landsat scenes for the Sudan pilot study. The system is initially conceived for the MicroVAX 2/GPX, running VMS. To facilitate comparative analysis, a global time-series database (1950 to 1987) is included for a basic set of 125 socio-economic variables per country per year. A more detailed database for the Sahelian countries includes soil type, water resources, agricultural production, agricultural import and export, food aid, and consumption. A pilot dataset for the Sudan with over 2,500 variables from the World Bank's ANDREX system, also includes epidemiological data on incidence of kwashiorkor, marasmus, other nutritional deficiencies, and

Renal Gene Expression Database (RGED): a relational database of gene expression profiles in kidney disease.

Science.gov (United States)

Zhang, Qingzhou; Yang, Bo; Chen, Xujiao; Xu, Jing; Mei, Changlin; Mao, Zhiguo

2014-01-01

We present a bioinformatics database named Renal Gene Expression Database (RGED), which contains comprehensive gene expression data sets from renal disease research. The web-based interface of RGED allows users to query the gene expression profiles in various kidney-related samples, including renal cell lines, human kidney tissues and murine model kidneys. Researchers can explore certain gene profiles, the relationships between genes of interests and identify biomarkers or even drug targets in kidney diseases. The aim of this work is to provide a user-friendly utility for the renal disease research community to query expression profiles of genes of their own interest without the requirement of advanced computational skills. Website is implemented in PHP, R, MySQL and Nginx and freely available from http://rged.wall-eva.net. http://rged.wall-eva.net. © The Author(s) 2014. Published by Oxford University Press.

Assessing the quality of life history information in publicly available databases.

Science.gov (United States)

Thorson, James T; Cope, Jason M; Patrick, Wesley S

2014-01-01

Single-species life history parameters are central to ecological research and management, including the fields of macro-ecology, fisheries science, and ecosystem modeling. However, there has been little independent evaluation of the precision and accuracy of the life history values in global and publicly available databases. We therefore develop a novel method based on a Bayesian errors-in-variables model that compares database entries with estimates from local experts, and we illustrate this process by assessing the accuracy and precision of entries in FishBase, one of the largest and oldest life history databases. This model distinguishes biases among seven life history parameters, two types of information available in FishBase (i.e., published values and those estimated from other parameters), and two taxa (i.e., bony and cartilaginous fishes) relative to values from regional experts in the United States, while accounting for additional variance caused by sex- and region-specific life history traits. For published values in FishBase, the model identifies a small positive bias in natural mortality and negative bias in maximum age, perhaps caused by unacknowledged mortality caused by fishing. For life history values calculated by FishBase, the model identified large and inconsistent biases. The model also demonstrates greatest precision for body size parameters, decreased precision for values derived from geographically distant populations, and greatest between-sex differences in age at maturity. We recommend that our bias and precision estimates be used in future errors-in-variables models as a prior on measurement errors. This approach is broadly applicable to global databases of life history traits and, if used, will encourage further development and improvements in these databases.

DBCG hypo trial validation of radiotherapy parameters from a national data bank versus manual reporting.

Science.gov (United States)

Brink, Carsten; Lorenzen, Ebbe L; Krogh, Simon Long; Westberg, Jonas; Berg, Martin; Jensen, Ingelise; Thomsen, Mette Skovhus; Yates, Esben Svitzer; Offersen, Birgitte Vrou

2018-01-01

The current study evaluates the data quality achievable using a national data bank for reporting radiotherapy parameters relative to the classical manual reporting method of selected parameters. The data comparison is based on 1522 Danish patients of the DBCG hypo trial with data stored in the Danish national radiotherapy data bank. In line with standard DBCG trial practice selected parameters were also reported manually to the DBCG database. Categorical variables are compared using contingency tables, and comparison of continuous parameters is presented in scatter plots. For categorical variables 25 differences between the data bank and manual values were located. Of these 23 were related to mistakes in the manual reported value whilst the remaining two were a wrong classification in the data bank. The wrong classification in the data bank was related to lack of dose information, since the two patients had been treated with an electron boost based on a manual calculation, thus data was not exported to the data bank, and this was not detected prior to comparison with the manual data. For a few database fields in the manual data an ambiguity of the parameter definition of the specific field is seen in the data. This was not the case for the data bank, which extract all data consistently. In terms of data quality the data bank is superior to manually reported values. However, there is a need to allocate resources for checking the validity of the available data as well as ensuring that all relevant data is present. The data bank contains more detailed information, and thus facilitates research related to the actual dose distribution in the patients.

A Generic Approach to Parameter Control

NARCIS (Netherlands)

Karafotias, G.; Smit, S.K.; Eiben, A.E.

2012-01-01

On-line control of EA parameters is an approach to parameter setting that offers the advantage of values changing during the run. In this paper, we investigate parameter control from a generic and parameter-independent perspective. We propose a generic control mechanism that is targeted to

Technical Work Plan for: Thermodynamic Databases for Chemical Modeling

International Nuclear Information System (INIS)

C.F. Jovecolon

2006-01-01

The objective of the work scope covered by this Technical Work Plan (TWP) is to correct and improve the Yucca Mountain Project (YMP) thermodynamic databases, to update their documentation, and to ensure reasonable consistency among them. In addition, the work scope will continue to generate database revisions, which are organized and named so as to be transparent to internal and external users and reviewers. Regarding consistency among databases, it is noted that aqueous speciation and mineral solubility data for a given system may differ according to how solubility was determined, and the method used for subsequent retrieval of thermodynamic parameter values from measured data. Of particular concern are the details of the determination of ''infinite dilution'' constants, which involve the use of specific methods for activity coefficient corrections. That is, equilibrium constants developed for a given system for one set of conditions may not be consistent with constants developed for other conditions, depending on the species considered in the chemical reactions and the methods used in the reported studies. Hence, there will be some differences (for example in log K values) between the Pitzer and ''B-dot'' database parameters for the same reactions or species

Analysis of a Kalman filter based method for on-line estimation of atmospheric dispersion parameters using radiation monitoring data

DEFF Research Database (Denmark)

Drews, Martin; Lauritzen, Bent; Madsen, Henrik

2005-01-01

A Kalman filter method is discussed for on-line estimation of radioactive release and atmospheric dispersion from a time series of off-site radiation monitoring data. The method is based on a state space approach, where a stochastic system equation describes the dynamics of the plume model...... parameters, and the observables are linked to the state variables through a static measurement equation. The method is analysed for three simple state space models using experimental data obtained at a nuclear research reactor. Compared to direct measurements of the atmospheric dispersion, the Kalman filter...... estimates are found to agree well with the measured parameters, provided that the radiation measurements are spread out in the cross-wind direction. For less optimal detector placement it proves difficult to distinguish variations in the source term and plume height; yet the Kalman filter yields consistent...

A plant resource and experiment management system based on the Golm Plant Database as a basic tool for omics research

Directory of Open Access Journals (Sweden)

Selbig Joachim

2008-05-01

Full Text Available Abstract Background For omics experiments, detailed characterisation of experimental material with respect to its genetic features, its cultivation history and its treatment history is a requirement for analyses by bioinformatics tools and for publication needs. Furthermore, meta-analysis of several experiments in systems biology based approaches make it necessary to store this information in a standardised manner, preferentially in relational databases. In the Golm Plant Database System, we devised a data management system based on a classical Laboratory Information Management System combined with web-based user interfaces for data entry and retrieval to collect this information in an academic environment. Results The database system contains modules representing the genetic features of the germplasm, the experimental conditions and the sampling details. In the germplasm module, genetically identical lines of biological material are generated by defined workflows, starting with the import workflow, followed by further workflows like genetic modification (transformation, vegetative or sexual reproduction. The latter workflows link lines and thus create pedigrees. For experiments, plant objects are generated from plant lines and united in so-called cultures, to which the cultivation conditions are linked. Materials and methods for each cultivation step are stored in a separate ACCESS database of the plant cultivation unit. For all cultures and thus every plant object, each cultivation site and the culture's arrival time at a site are logged by a barcode-scanner based system. Thus, for each plant object, all site-related parameters, e.g. automatically logged climate data, are available. These life history data and genetic information for the plant objects are linked to analytical results by the sampling module, which links sample components to plant object identifiers. This workflow uses controlled vocabulary for organs and treatments. Unique

A Components Database Design and Implementation for Accelerators and Detectors

International Nuclear Information System (INIS)

Chan, A.; Meyer, S.

2011-01-01

Many accelerator and detector systems being fabricated for the PEP-II Accelerator and BABAR Detector needed configuration control and calibration measurements tracked for their components. Instead of building a database for each distinct system, a Components Database was designed and implemented that can encompass any type of component and any type of measurement. In this paper we describe this database design that is especially suited for the engineering and fabrication processes of the accelerator and detector environments where there are thousands of unique component types. We give examples of information stored in the Components Database, which includes accelerator configuration, calibration measurements, fabrication history, design specifications, inventory, etc. The World Wide Web interface is used to access the data, and templates are available for international collaborations to collect data off-line.

Distribution Line Parameter Estimation Under Consideration of Measurement Tolerances

DEFF Research Database (Denmark)

Prostejovsky, Alexander; Gehrke, Oliver; Kosek, Anna Magdalena

2016-01-01

conductance that the absolute compensated error is −1.05% and −1.07% for both representations, as opposed to the expected uncompensated error of −79.68%. Identification of a laboratory distribution line using real measurement data grid yields a deviation of 6.75% and 4.00%, respectively, from a calculation...

Sleep parameters, functional status and time post-stroke are associated with off-line motor skill learning in people with chronic stroke

Directory of Open Access Journals (Sweden)

Catherine eSiengsukon

2015-10-01

Full Text Available Background: Mounting evidence demonstrates that individuals with stroke benefit from sleep to enhance learning of a motor task. While stage NREM2 sleep and REM sleep have been associated with off-line motor skill learning in neurologically-intact individuals, it remains unknown which sleep parameters or specific sleep stages are associated with off-line motor skill learning in individuals with stroke. Methods: Twenty individuals with chronic stroke (> 6 months following stroke and 10 neurologically slept for three consecutive nights in a sleep laboratory with polysomnography. Participants practiced a tracking task the morning before the third night and underwent a retention test the morning following the third night. Off-line learning on the tracking task was assessed. Pearson’s correlations assessed for associations between the magnitude of off-line learning and sleep variables, age, upper extremity motor function, stroke severity, depression and time since stroke occurrence.Results: Individuals with stroke performed with significantly less error on the tracking task following a night of sleep (p=.006 while the control participants did not (p=.816. Increased sleep efficiency (r= -.285, less time spent in stage NREM3 sleep (r=.260, and more time spent in stage REM sleep (r= -.266 was weakly-to-moderately associated with increased magnitude of off-line motor learning. Furthermore, higher upper-extremity motor function (r = -.400, lower stroke severity (r = .360, and less time since stroke occurrence (r=.311 were moderately associated with increased magnitude of off-line motor learning. Conclusion: This study is the first study to provide insight into which sleep stages and individual characteristics may be associated with off-line learning in people with stroke. Future work should continue to understand which factors or combination of factors promote off-line motor learning in people with neurologic injury to best promote motor recovery in

Wind-Wildlife Impacts Literature Database (WILD)(Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2015-01-01

The Wind-Wildlife Impacts Literature Database (WILD), developed and maintained by the National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory (NREL), is comprised of over 1,000 citations pertaining to the effects of land-based wind, offshore wind, marine and hydrokinetic, power lines, and communication and television towers on wildlife.

Energy confinement scaling from the international stellarator database

Energy Technology Data Exchange (ETDEWEB)

Stroth, U [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Murakami, M; Dory, R A; Yamada, H; Okamura, S; Sano, F; Obiki, T

1995-09-01

An international stellarator database on global energy confinement is presented comprising data from the ATF, CHS and Heliotron E heliotron/torsatrons and the W7-A and W7-AS shearless stellarators. Regression expressions for the energy confinement time are given for the individual devices and the combined dataset. A comparison with tokamak L mode confinement is discussed on the basis of various scaling expressions. In order to make this database available to interested colleagues, the structure of the database and the parameter list are explained in detail. More recent confinement results incorporating data from enhanced confinement regimes such as H mode are reported elsewhere. (author).

SODA: The reduced database for the TdeV tokamak

International Nuclear Information System (INIS)

Cote, A.; Michaud, D.; Caumartin, J.; de Villers, P.; Gauthier, Y.; Gauvreau, J.; Larsen, J.

1997-01-01

SODA which stands for Systgrave eme d close-quote Organisation des Donnacute ees et d close-quote Analyse, is a general database for TdeV. SODA has the following goals: to produce a database of a reduced set of physical data; to ensure that these data are validated; to record all the parameters relevant to tokamak operation and experiments; to facilitate the retrieval of data using given selection criteria; and to improve data accessibility and analysis. The relational database ORACLE trademark has been chosen to provide flexibility and to accommodate the increasing expectations of the TdeV researchers. In-house expertise allows custom-made tables and centralized data management. In the process of creating SODA several new interfaces for the scientific coordinator, machine operator, and diagnosticians have been added to provide a better definition of the experiment for the archiving system. The database includes the more relevant machine and diagnostic parameters, plasma perturbations (rf, biasing, gas hor-ellipsis), mean and standard deviation of physical signals, plasma profiles, and code results (equilibrium hor-ellipsis) for selected time windows in a discharge. Users of the X-window interface of SODA are not required to know the database structure or the SQL language. SODA has been operating successfully for over a year and its capabilities are continuously expanding. copyright 1997 American Institute of Physics

R2 Metropolitan Division, 2013; TIGER/Line Shapefile

Data.gov (United States)

U.S. Environmental Protection Agency — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

Toxicity of ionic liquids: Database and prediction via quantitative structure–activity relationship method

International Nuclear Information System (INIS)

Zhao, Yongsheng; Zhao, Jihong; Huang, Ying; Zhou, Qing; Zhang, Xiangping; Zhang, Suojiang

2014-01-01

Highlights: • A comprehensive database on toxicity of ionic liquids (ILs) was established. • Relationship between structure and toxicity of IL has been analyzed qualitatively. • Two new QSAR models were developed for predicting toxicity of ILs to IPC-81. • Accuracy of proposed nonlinear SVM model is much higher than the linear MLR model. • The established models can be explored in designing novel green agents. - Abstract: A comprehensive database on toxicity of ionic liquids (ILs) is established. The database includes over 4000 pieces of data. Based on the database, the relationship between IL's structure and its toxicity has been analyzed qualitatively. Furthermore, Quantitative Structure–Activity relationships (QSAR) model is conducted to predict the toxicities (EC 50 values) of various ILs toward the Leukemia rat cell line IPC-81. Four parameters selected by the heuristic method (HM) are used to perform the studies of multiple linear regression (MLR) and support vector machine (SVM). The squared correlation coefficient (R 2 ) and the root mean square error (RMSE) of training sets by two QSAR models are 0.918 and 0.959, 0.258 and 0.179, respectively. The prediction R 2 and RMSE of QSAR test sets by MLR model are 0.892 and 0.329, by SVM model are 0.958 and 0.234, respectively. The nonlinear model developed by SVM algorithm is much outperformed MLR, which indicates that SVM model is more reliable in the prediction of toxicity of ILs. This study shows that increasing the relative number of O atoms of molecules leads to decrease in the toxicity of ILs

Geometric database maintenance using CCTV cameras and overlay graphics

Science.gov (United States)

Oxenberg, Sheldon C.; Landell, B. Patrick; Kan, Edwin

1988-01-01

An interactive graphics system using closed circuit television (CCTV) cameras for remote verification and maintenance of a geometric world model database has been demonstrated in GE's telerobotics testbed. The database provides geometric models and locations of objects viewed by CCTV cameras and manipulated by telerobots. To update the database, an operator uses the interactive graphics system to superimpose a wireframe line drawing of an object with known dimensions on a live video scene containing that object. The methodology used is multipoint positioning to easily superimpose a wireframe graphic on the CCTV image of an object in the work scene. An enhanced version of GE's interactive graphics system will provide the object designation function for the operator control station of the Jet Propulsion Laboratory's telerobot demonstration system.

A New Global Coastal Database for Impact and Vulnerability Analysis to Sea-Level Rise

NARCIS (Netherlands)

Vafeidis, A.T.; Nicholls, R.J.; McFadden, L.; Tol, R.S.J.; Hinkel, J.; Spencer, T.; Grashoff, P.S.; Boot, G.; Klein, R.J.T.

2008-01-01

A new global coastal database has been developed within the context of the DINAS-COAST project. The database covers the world's coasts, excluding Antarctica, and includes information on more than 80 physical, ecological, and socioeconomic parameters of the coastal zone. The database provides the

The HyMeX database

Science.gov (United States)

Brissebrat, Guillaume; Mastrorillo, Laurence; Ramage, Karim; Boichard, Jean-Luc; Cloché, Sophie; Fleury, Laurence; Klenov, Ludmila; Labatut, Laurent; Mière, Arnaud

2013-04-01

The international HyMeX (HYdrological cycle in the Mediterranean EXperiment) project aims at a better understanding and quantification of the hydrological cycle and related processes in the Mediterranean, with emphasis on high-impact weather events, inter-annual to decadal variability of the Mediterranean coupled system, and associated trends in the context of global change. The project includes long term monitoring of environmental parameters, intensive field campaigns, use of satellite data, modelling studies, as well as post event field surveys and value-added products processing. Therefore HyMeX database incorporates various dataset types from different disciplines, either operational or research. The database relies on a strong collaboration between OMP and IPSL data centres. Field data, which are 1D time series, maps or pictures, are managed by OMP team while gridded data (satellite products, model outputs, radar data...) are managed by IPSL team. At present, the HyMeX database contains about 150 datasets, including 80 hydrological, meteorological, ocean and soil in situ datasets, 30 radar datasets, 15 satellite products, 15 atmosphere, ocean and land surface model outputs from operational (re-)analysis or forecasts and from research simulations, and 5 post event survey datasets. The data catalogue complies with international standards (ISO 19115; INSPIRE; Directory Interchange Format; Global Change Master Directory Thesaurus). It includes all the datasets stored in the HyMeX database, as well as external datasets relevant for the project. All the data, whatever the type is, are accessible through a single gateway. The database website http://mistrals.sedoo.fr/HyMeX offers different tools: - A registration procedure which enables any scientist to accept the data policy and apply for a user database account. - A search tool to browse the catalogue using thematic, geographic and/or temporal criteria. - Sorted lists of the datasets by thematic keywords, by

The ChArMEx database

Science.gov (United States)

Ferré, Hélène; Descloitres, Jacques; Fleury, Laurence; Boichard, Jean-Luc; Brissebrat, Guillaume; Focsa, Loredana; Henriot, Nicolas; Mastrorillo, Laurence; Mière, Arnaud; Vermeulen, Anne

2013-04-01

The Chemistry-Aerosol Mediterranean Experiment (ChArMEx, http://charmex.lsce.ipsl.fr/) aims at a scientific assessment of the present and future state of the atmospheric environment in the Mediterranean Basin, and of its impacts on the regional climate, air quality, and marine biogeochemistry. The project includes long term monitoring of environmental parameters, intensive field campaigns, use of satellite data and modelling studies. Therefore ChARMEx scientists produce and need to access a wide diversity of data. In this context, the objective of the database task is to organize data management, distribution system and services such as facilitating the exchange of information and stimulating the collaboration between researchers within the ChArMEx community, and beyond. The database relies on a strong collaboration between OMP and ICARE data centres and falls within the scope of the Mediterranean Integrated Studies at Regional And Locals Scales (MISTRALS) program data portal. All the data produced by or of interest for the ChArMEx community will be documented in the data catalogue and accessible through the database website: http://mistrals.sedoo.fr/ChArMEx. The database website offers different tools: - A registration procedure which enables any scientist to accept the data policy and apply for a user database account. - Forms to document observations or products that will be provided to the database in compliance with metadata international standards (ISO 19115-19139; INSPIRE; Global Change Master Directory Thesaurus). - A search tool to browse the catalogue using thematic, geographic and/or temporal criteria. - Sorted lists of the datasets by thematic keywords, by measured parameters, by instruments or by platform type. - A shopping-cart web interface to order in situ data files. At present datasets from the background monitoring station of Ersa, Cape Corsica and from the 2012 ChArMEx pre-campaign are available. - A user-friendly access to satellite products

HEND: A Database for High Energy Nuclear Data

International Nuclear Information System (INIS)

Brown, D; Vogt, R

2007-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. The database will be searchable and cross-indexed with relevant publications, including published detector descriptions. It should eventually contain all published data from older heavy-ion programs such as the Bevalac, AGS, SPS and FNAL fixed-target programs, as well as published data from current programs at RHIC and new facilities at GSI (FAIR), KEK/Tsukuba and the LHC collider. This data includes all proton-proton, proton-nucleus to nucleus-nucleus collisions as well as other relevant systems and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of experiments. To enhance the utility of the database, we propose periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support

Stackfile Database

Science.gov (United States)

deVarvalho, Robert; Desai, Shailen D.; Haines, Bruce J.; Kruizinga, Gerhard L.; Gilmer, Christopher

2013-01-01

This software provides storage retrieval and analysis functionality for managing satellite altimetry data. It improves the efficiency and analysis capabilities of existing database software with improved flexibility and documentation. It offers flexibility in the type of data that can be stored. There is efficient retrieval either across the spatial domain or the time domain. Built-in analysis tools are provided for frequently performed altimetry tasks. This software package is used for storing and manipulating satellite measurement data. It was developed with a focus on handling the requirements of repeat-track altimetry missions such as Topex and Jason. It was, however, designed to work with a wide variety of satellite measurement data [e.g., Gravity Recovery And Climate Experiment -- GRACE). The software consists of several command-line tools for importing, retrieving, and analyzing satellite measurement data.

High-resolution Laboratory Measurements of Coronal Lines near the Fe IX Line at 171 Å

Science.gov (United States)

Beiersdorfer, Peter; Träbert, Elmar

2018-02-01

We present high-resolution laboratory measurements in the spectral region between 165 and 175 Å that focus on the emission from various ions of C, O, F, Ne, S, Ar, Fe, and Ni. This wavelength region is centered on the λ171 Fe IX channel of the Atmospheric Imaging Assembly on the Solar Dynamics Observatory, and we place special emphasis on the weaker emission lines of Fe IX predicted in this region. In general, our measurements show a multitude of weak lines missing in the current databases, where the emission lines of Ni are probably most in need of further identification and reclassification. We also find that the wavelengths of some of the known lines need updating. Using the multi-reference Møller–Plesset method for wavelength predictions and collisional-radiative modeling of the line intensities, we have made tentative assignments of more than a dozen lines to the spectrum of Fe IX, some of which have formerly been identified as Fe VII, Fe XIV, or Fe XVI lines. Several Fe features remain unassigned, although they appear to be either Fe VII or Fe X lines. Further work will be needed to complete and correct the spectral line lists in this wavelength region.

Database Description - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Database Description General information of database Database... name Yeast Interacting Proteins Database Alternative name - DOI 10.18908/lsdba.nbdc00742-000 Creator C...-ken 277-8561 Tel: +81-4-7136-3989 FAX: +81-4-7136-3979 E-mail : Database classif...s cerevisiae Taxonomy ID: 4932 Database description Information on interactions and related information obta...l Acad Sci U S A. 2001 Apr 10;98(8):4569-74. Epub 2001 Mar 13. External Links: Original website information Database

A59 waste repackaging database (AWARD)

International Nuclear Information System (INIS)

Keel, A.

1993-06-01

This paper sets out the requirements for AWARD (the A59 Waste Repackaging Database); a computer-based system to record LLW sorting and repacking information from the North Cave Line in A59. A solution will be developed on the basis of this document. AWARD will record and store details entered from waste sorting and LLW repackaging operations. This document will be used as the basis of the development of the host computer system. (Author)

Update History of This Database - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Trypanosomes Database Update History of This Database Date Update contents 2014/05/07 The co...ntact information is corrected. The features and manner of utilization of the database are corrected. 2014/02/04 Trypanosomes Databas...e English archive site is opened. 2011/04/04 Trypanosomes Database ( http://www.tan...paku.org/tdb/ ) is opened. About This Database Database Description Download Lice...nse Update History of This Database Site Policy | Contact Us Update History of This Database - Trypanosomes Database | LSDB Archive ...

Pathbase: A new reference resource and database for laboratory mouse pathology

International Nuclear Information System (INIS)

Schofield, P. N.; Bard, J. B. L.; Boniver, J.; Covelli, V.; Delvenne, P.; Ellender, M.; Engstrom, W.; Goessner, W.; Gruenberger, M.; Hoefler, H.; Hopewell, J. W.; Mancuso, M.; Mothersill, C.; Quintanilla-Martinez, L.; Rozell, B.; Sariola, H.; Sundberg, J. P.; Ward, A.

2004-01-01

Pathbase (http:/www.pathbase.net) is a web accessible database of histopathological images of laboratory mice, developed as a resource for the coding and archiving of data derived from the analysis of mutant or genetically engineered mice and their background strains. The metadata for the images, which allows retrieval and inter-operability with other databases, is derived from a series of orthogonal ontologies, and controlled vocabularies. One of these controlled vocabularies, MPATH, was developed by the Pathbase Consortium as a formal description of the content of mouse histopathological images. The database currently has over 1000 images on-line with 2000 more under curation and presents a paradigm for the development of future databases dedicated to aspects of experimental biology. (authors)

Data-base tools for enhanced analysis of TMX-U data

International Nuclear Information System (INIS)

Stewart, M.E.; Carter, M.R.; Casper, T.A.; Meyer, W.H.; Perkins, D.E.; Whitney, D.M.

1986-01-01

The authors use a commercial data-base software package to create several data-base products that enhance the ability of experimental physicists to analyze data from the TMX-U experiment. This software resides on a Dec-20 computer in M-Divisions's user service center (USC), where data can be analyzed separately from the main acquisition computers. When these data-base tools are combined with interactive data analysis programs, physicists can perform automated (batch-style) processing or interactive data analysis on the computers in the USC or on the supercomputers of the NMFECC, in addition to the normal processing done on the acquisition system. One data-base tool provides highly reduced data for searching and correlation analysis of several diagnostic signals for a single shot or many shots. A second data-base tool provides retrieval and storage of unreduced data for detailed analysis of one or more diagnostic signals. The authors report how these data-base tools form the core of an evolving off-line data-analysis environment on the USC computers

LINE-BASED REGISTRATION OF DSM AND HYPERSPECTRAL IMAGES

Directory of Open Access Journals (Sweden)

J. Avbelj

2013-04-01

Full Text Available Data fusion techniques require a good registration of all the used datasets. In remote sensing, images are usually geo-referenced using the GPS and IMU data. However, if more precise registration is required, image processing techniques can be employed. We propose a method for multi-modal image coregistration between hyperspectral images (HSI and digital surface models (DSM. The method is divided in three parts: object and line detection of the same object in HSI and DSM, line matching and determination of transformation parameters. Homogeneous coordinates are used to implement matching and adjustment of transformation parameters. The common object in HSI and DSM are building boundaries. They have apparent change in height and material, that can be detected in DSM and HSI, respectively. Thus, before the matching and transformation parameter computation, building outlines are detected and adjusted in HSI and DSM. We test the method on a HSI and two DSM, using extracted building outbounds and for comparison also extracted lines with a line detector. The results show that estimated building boundaries provide more line assignments, than using line detector.

Retrievals of ethane from ground-based high-resolution FTIR solar observations with updated line parameters: determination of the optimum strategy for the Jungfraujoch station.

Science.gov (United States)

Bader, W.; Perrin, A.; Jacquemart, D.; Sudo, K.; Yashiro, H.; Gauss, M.; Demoulin, P.; Servais, C.; Mahieu, E.

2012-04-01

Ethane (C2H6) is the most abundant Non-Methane HydroCarbon (NMHC) in the Earth's atmosphere, with a lifetime of approximately 2 months. C2H6 has both anthropogenic and natural emission sources such as biomass burning, natural gas loss and biofuel consumption. Oxidation by the hydroxyl radical is by far the major C2H6 sink as the seasonally changing OH concentration controls the strong modulation of the ethane abundance throughout the year. Ethane lowers Cl atom concentrations in the lower stratosphere and is a major source of peroxyacetyl nitrate (PAN) and carbon monoxide (by reaction with OH). Involved in the formation of tropospheric ozone and in the destruction of atmospheric methane through changes in OH, C2H6 is a non-direct greenhouse gas with a net-global warming potential (100-yr horizon) of 5.5. The retrieval of ethane from ground-based infrared (IR) spectra is challenging. Indeed, the fitting of the ethane features is complicated by numerous interferences by strong water vapor, ozone and methane absorptions. Moreover, ethane has a complicated spectrum with many interacting vibrational modes and the current state of ethane parameters in HITRAN (e.g. : Rothman et al., 2009, see http://www.hitran.com) was rather unsatisfactory in the 3 μm region. In fact, PQ branches outside the 2973-3001 cm-1 range are not included in HITRAN, and most P and R structures are missing. New ethane absorption cross sections recorded at the Molecular Spectroscopy Facility of the Rutherford Appleton Laboratory (Harrison et al., 2010) are used in our retrievals. They were calibrated in intensity by using reference low-resolution spectra from the Pacific Northwest National Laboratory (PNNL) IR database. Pseudoline parameters fitted to these ethane spectra have been combined with HITRAN 2004 line parameters (including all the 2006 updates) for all other species encompassed in the selected microwindows. Also, the improvement brought by the update of the line positions and intensities

Study of process parameters effect on the filling phase of micro injection moulding using weld lines as flow markers

DEFF Research Database (Denmark)

Tosello, Guido; Gava, Alberto; Hansen, Hans Nørgaard

2010-01-01

, the relationships between the filling pattern and the different process parameter settings have to be established. In this paper, a novel approach based on the use of weld lines as flow markers to trace the development of the flow front during the filling is proposed. The effects on the filling stage of process......Micro-injection moulding (micro-moulding) is a process which enables the mass production of polymer microproducts. In order to produce high-quality injection moulded micro-parts, a crucial aspect to be fully understood and optimised is the filling of the cavity by the molten polymer. As a result...... manufactured by micro-electrodischarge machining. A commercially available polystyrene grade polymer has been moulded using a high-speed injection moulding machine. The design of experiment technique was employed to determine the effect of the process parameters on the filling phase of the micro...

[Establishment of database with standard 3D tooth crowns based on 3DS MAX].

Science.gov (United States)

Cheng, Xiaosheng; An, Tao; Liao, Wenhe; Dai, Ning; Yu, Qing; Lu, Peijun

2009-08-01

The database with standard 3D tooth crowns has laid the groundwork for dental CAD/CAM system. In this paper, we design the standard tooth crowns in 3DS MAX 9.0 and create a database with these models successfully. Firstly, some key lines are collected from standard tooth pictures. Then we use 3DS MAX 9.0 to design the digital tooth model based on these lines. During the design process, it is important to refer to the standard plaster tooth model. After some tests, the standard tooth models designed with this method are accurate and adaptable; furthermore, it is very easy to perform some operations on the models such as deforming and translating. This method provides a new idea to build the database with standard 3D tooth crowns and a basis for dental CAD/CAM system.

On-line monitoring and control of animal-cell cultures

NARCIS (Netherlands)

Pol, van der J.J.

1996-01-01

On-line analysis and control of biotechnological processes is still the stepchild in industry. In general, only parameters as dissolved-oxygen concentration, pH and temperature are controlled on-line. Important parameters as substrate and inhibitor concentrations are only measured

The IFUSP microtron accelerator beam transport line

International Nuclear Information System (INIS)

Rios, Paulo Beolchi

2002-01-01

In this work, the electron optical project of the IFUSP microtron beam transport line is presented, including the operational values for the parameters of the dipolar and quadrupolar electromagnets, as well as their location along the beam line. Analytical calculations and computer simulations were performed to obtain these results, and a programming tool was developed in order to analyze the beam parameters and to help studying racetrack microtrons. The electron optical simulations were split into two different study cases: the microtron booster, and the transfer line. In the first case, it was determined the main operational parameters of a microtron working far from its usual stability conditions. In the latter, it was done the basic design of the linking line between the booster and main (not yet built) microtrons, and between them and the experimental hall, with a total path length of approximately 32 m including large horizontal and vertical deflections with variable beam energy. (author)

CDKD: a clinical database of kidney diseases

Directory of Open Access Journals (Sweden)

Singh Sanjay

2012-04-01

Full Text Available Abstract Background The main function of the kidneys is to remove waste products and excess water from the blood. Loss of kidney function leads to various health issues, such as anemia, high blood pressure, bone disease, disorders of cholesterol. The main objective of this database system is to store the personal and laboratory investigatory details of patients with kidney disease. The emphasis is on experimental results relevant to quantitative renal physiology, with a particular focus on data relevant for evaluation of parameters in statistical models of renal function. Description Clinical database of kidney diseases (CDKD has been developed with patient confidentiality and data security as a top priority. It can make comparative analysis of one or more parameters of patient’s record and includes the information of about whole range of data including demographics, medical history, laboratory test results, vital signs, personal statistics like age and weight. Conclusions The goal of this database is to make kidney-related physiological data easily available to the scientific community and to maintain & retain patient’s record. As a Web based application it permits physician to see, edit and annotate a patient record from anywhere and anytime while maintaining the confidentiality of the personal record. It also allows statistical analysis of all data.

EMISSION SIGNATURES FROM SUB-PARSEC BINARY SUPERMASSIVE BLACK HOLES. I. DIAGNOSTIC POWER OF BROAD EMISSION LINES

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Khai; Bogdanović, Tamara [Center for Relativistic Astrophysics, School of Physics, Georgia Institute of Technology, Atlanta GA 30332 (United States)

2016-09-10

Motivated by advances in observational searches for sub-parsec supermassive black hole binaries (SBHBs) made in the past few years, we develop a semi-analytic model to describe spectral emission-line signatures of these systems. The goal of this study is to aid the interpretation of spectroscopic searches for binaries and to help test one of the leading models of binary accretion flows in the literature: SBHB in a circumbinary disk. In this work, we present the methodology and a comparison of the preliminary model with the data. We model SBHB accretion flows as a set of three accretion disks: two mini-disks that are gravitationally bound to the individual black holes and a circumbinary disk. Given a physically motivated parameter space occupied by sub-parsec SBHBs, we calculate a synthetic database of nearly 15 million broad optical emission-line profiles and explore the dependence of the profile shapes on characteristic properties of SBHBs. We find that the modeled profiles show distinct statistical properties as a function of the semimajor axis, mass ratio, eccentricity of the binary, and the degree of alignment of the triple disk system. This suggests that the broad emission-line profiles from SBHB systems can in principle be used to infer the distribution of these parameters and as such merit further investigation. Calculated profiles are more morphologically heterogeneous than the broad emission lines in observed SBHB candidates and we discuss improved treatment of radiative transfer effects, which will allow a direct statistical comparison of the two groups.

EMISSION SIGNATURES FROM SUB-PARSEC BINARY SUPERMASSIVE BLACK HOLES. I. DIAGNOSTIC POWER OF BROAD EMISSION LINES

International Nuclear Information System (INIS)

Nguyen, Khai; Bogdanović, Tamara

2016-01-01

Motivated by advances in observational searches for sub-parsec supermassive black hole binaries (SBHBs) made in the past few years, we develop a semi-analytic model to describe spectral emission-line signatures of these systems. The goal of this study is to aid the interpretation of spectroscopic searches for binaries and to help test one of the leading models of binary accretion flows in the literature: SBHB in a circumbinary disk. In this work, we present the methodology and a comparison of the preliminary model with the data. We model SBHB accretion flows as a set of three accretion disks: two mini-disks that are gravitationally bound to the individual black holes and a circumbinary disk. Given a physically motivated parameter space occupied by sub-parsec SBHBs, we calculate a synthetic database of nearly 15 million broad optical emission-line profiles and explore the dependence of the profile shapes on characteristic properties of SBHBs. We find that the modeled profiles show distinct statistical properties as a function of the semimajor axis, mass ratio, eccentricity of the binary, and the degree of alignment of the triple disk system. This suggests that the broad emission-line profiles from SBHB systems can in principle be used to infer the distribution of these parameters and as such merit further investigation. Calculated profiles are more morphologically heterogeneous than the broad emission lines in observed SBHB candidates and we discuss improved treatment of radiative transfer effects, which will allow a direct statistical comparison of the two groups.

Spectro web: oscillator strength measurements of atomic absorption lines in the sun and procyon

International Nuclear Information System (INIS)

Lobel, A

2008-01-01

We update the online SpectroWeb database of spectral standard reference stars with 1178 oscillator strength values of atomic absorption lines observed in the optical spectrum of the Sun and Procyon (α CMi A). The updated line oscillator strengths are measured with best fits to the disk-integrated KPNO-FTS spectrum of the Sun observed between 4000 A and 6800 A using state-of-the-art detailed spectral synthesis calculations. A subset of 660 line oscillator strengths is validated with synthetic spectrum calculations of Procyon observed with ESO-UVES between 4700 A and 6800 A. The new log(gf)-values in SpectroWeb are improvements upon the values offered in the online Vienna Atomic Line Database (VALD). We find for neutral iron-group elements, such as Fe I, Ni I, Cr I, and Ti I, a statistically significant over-estimation of the VALD log((gf)-values for weak absorption lines with normalized central line depths below 15 %. For abundant lighter elements (e.g. Mg I and Ca I) this trend is statistically not significantly detectable, with the exception of Si I for which the log(gf)-values of 60 weak and medium-strong lines are substantially decreased to best fit the observed spectra. The newly measured log(gf)-values are available in the SpectroWeb database at http://spectra.freeshell.org, which interactively displays the observed and computed stellar spectra, together with corresponding atomic line data.

Sagace: A web-based search engine for biomedical databases in Japan

Directory of Open Access Journals (Sweden)

Morita Mizuki

2012-10-01

Full Text Available Abstract Background In the big data era, biomedical research continues to generate a large amount of data, and the generated information is often stored in a database and made publicly available. Although combining data from multiple databases should accelerate further studies, the current number of life sciences databases is too large to grasp features and contents of each database. Findings We have developed Sagace, a web-based search engine that enables users to retrieve information from a range of biological databases (such as gene expression profiles and proteomics data and biological resource banks (such as mouse models of disease and cell lines. With Sagace, users can search more than 300 databases in Japan. Sagace offers features tailored to biomedical research, including manually tuned ranking, a faceted navigation to refine search results, and rich snippets constructed with retrieved metadata for each database entry. Conclusions Sagace will be valuable for experts who are involved in biomedical research and drug development in both academia and industry. Sagace is freely available at http://sagace.nibio.go.jp/en/.

Database management in the new GANIL control system

International Nuclear Information System (INIS)

Lecorche, E.; Lermine, P.

1993-01-01

At the start of the new control system design, decision was made to manage the huge amount of data by means of a database management system. The first implementations built on the INGRES relational database are described. Real time and data management domains are shown, and problems induced by Ada/SQL interfacing are briefly discussed. Database management concerns the whole hardware and software configuration for the GANIL pieces of equipment and the alarm system either for the alarm configuration or for the alarm logs. An other field of application encompasses the beam parameter archiving as a function of the various kinds of beams accelerated at GANIL (ion species, energies, charge states). (author) 3 refs., 4 figs

Translation from the collaborative OSM database to cartography

Science.gov (United States)

Hayat, Flora

2018-05-01

The OpenStreetMap (OSM) database includes original items very useful for geographical analysis and for creating thematic maps. Contributors record in the open database various themes regarding amenities, leisure, transports, buildings and boundaries. The Michelin mapping department develops map prototypes to test the feasibility of mapping based on OSM. To translate the OSM database structure into a database structure fitted with Michelin graphic guidelines a research project is in development. It aims at defining the right structure for the Michelin uses. The research project relies on the analysis of semantic and geometric heterogeneities in OSM data. In that order, Michelin implements methods to transform the input geographical database into a cartographic image dedicated for specific uses (routing and tourist maps). The paper focuses on the mapping tools available to produce a personalised spatial database. Based on processed data, paper and Web maps can be displayed. Two prototypes are described in this article: a vector tile web map and a mapping method to produce paper maps on a regional scale. The vector tile mapping method offers an easy navigation within the map and within graphic and thematic guide- lines. Paper maps can be partly automatically drawn. The drawing automation and data management are part of the mapping creation as well as the final hand-drawing phase. Both prototypes have been set up using the OSM technical ecosystem.

Update History of This Database - Arabidopsis Phenome Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Arabidopsis Phenome Database Update History of This Database Date Update contents 2017/02/27 Arabidopsis Phenome Data...base English archive site is opened. - Arabidopsis Phenome Database (http://jphenom...e.info/?page_id=95) is opened. About This Database Database Description Download License Update History of This Database... Site Policy | Contact Us Update History of This Database - Arabidopsis Phenome Database | LSDB Archive ...

Study of event sequence database for a nuclear power domain

International Nuclear Information System (INIS)

Kusumi, Yoshiaki

1998-01-01

A retrieval engine developed to extract event sequences from an accident information database using a time series retrieval formula expressed with ordered retrieval terms is explored. This engine outputs not only a sequence which completely matches with a time series retrieval formula, but also sequence which approximately matches the formula (fuzzy retrieval). An event sequence database in which records consist of three ordered parameters, namely the causal event, the process and result. Then the database is used to assess the feasibility of this engine and favorable results were obtained. (author)

GOSAT-2014 methane spectral line list

International Nuclear Information System (INIS)

Nikitin, A.V.; Lyulin, O.M.; Mikhailenko, S.N.; Perevalov, V.I.; Filippov, N.N.; Grigoriev, I.M.; Morino, I.; Yoshida, Y.; Matsunaga, T.

2015-01-01

The updated methane spectral line list GOSAT-2014 for the 5550–6240 cm −1 region with the intensity cutoff of 5×10 –25 cm/molecule at 296 K is presented. The line list is based on the extensive measurements of the methane spectral line parameters performed at different temperatures and pressures of methane without and with buffer gases N 2 , O 2 and air. It contains the following spectral line parameters of about 12150 transitions: line position, line intensity, energy of lower state, air-induced and self-pressure-induced broadening and shift coefficients and temperature exponent of air-broadening coefficient. The accuracy of the line positions and intensities are considerably improved in comparison with the previous version GOSAT-2009. The improvement of the line list is done mainly due to the involving to the line position and intensity retrieval of six new spectra recorded with short path way (8.75 cm). The air-broadening and air-shift coefficients for the J-manifolds of the 2ν 3 (F 2 ) band are refitted using the new more precise values of the line positions and intensities. The line assignment is considerably extended. The lower state J-value was assigned to 6397 lines representing 94.4% of integrated intensity of the considering wavenumber region. The complete assignment was done for 2750 lines. - Highlights: • The upgrade of the GOSAT methane line list in the 5550–6240 cm −1 region is done. • 12,146 experimental methane line positions and intensities are retrieved. • 6376 lower energy levels for methane lines are determined

East-China Geochemistry Database (ECGD):A New Networking Database for North China Craton

Science.gov (United States)

Wang, X.; Ma, W.

2010-12-01

generate classification thematic maps using query results, according different parameters. 3.Data analysis on-line. Here we designed lots of geochemical online analysis tools, including geochemical diagrams, CIPW computing, and so on, which allows researchers to analyze query data without download query results. Operation of all these analysis tools is very easy; users just do it by click mouse one or two time. In summary, ECGD provide a geochemical platform for researchers, whom to know where various data are, to view various data in a synthetic and dynamic way, and analyze interested data online. REFERENCES [1] S. Gao, R.L. Rudnick, and W.L. Xu, “Recycling deep cratonic lithosphere and generation of intraplate magmatism in the North China Craton,” Earth and Planetary Science Letters,270,41-53,2008. [2] K.A. Lehnert, U. Harms, and E. Ito, “Promises, Achievements, and Challenges of Networking Global Geoinformatics Resources - Experiences of GeosciNET and EarthChem,” Geophysical Research Abstracts, Vol.10, EGU2008-A-05242,2008.

Development of Row of Vibration Insulators and its Mathematical Models on a Base of Common Multi-parameter Scheme of Element Axial Line

Science.gov (United States)

Ponomarev, Yury K.

2018-01-01

The mathematical model of deformation of a cable (rope) vibration insulator consisting of two identical clips connected by means of elastic elements of a complex axial line is developed in detail. The axial line of the element is symmetric relatively to the horizontal axis of the shape and is made up of five rectilinear sections of arbitrary length a, b, c, conjugated to four radius sections with parameters R1 and R2 with angular extent 90°. On the basis of linear representations of the theory of bending and torsion of mechanics of materials, applied mechanics and linear algebra, a mathematical model of loading of an element and a vibration insulator as a whole in the direction of the vertical Y axis has been developed. Generalized characteristics of the friction and elastic forces for an elastic element with a complete set of the listed sections are obtained. Further, with the help of nullification in the generalized model of the characteristics of certain parameters, special cases of friction and elastic forces are obtained without taking into account the nullified parameters. Simultaneously, on the basis of the 3D computer-aided design system, volumetric models of simplified structures were created, given in the work. It is shown that, with the help of a variation of the five parameters of the axial scheme of the element, in combination with the variation of the moment of inertia of the rope section and the number of elements entering the ensemble, the load characteristics and stiffness of the vibration insulators can be changed tens and hundreds of times. This opens up unlimited possibilities for the optimal design of vibration protection systems in terms of weight characteristics, in cost, in terms of vibration intensity, in overall dimensions in different directions, which is very important for aerospace and transport engineering.

Refactoring databases evolutionary database design

CERN Document Server

Ambler, Scott W

2006-01-01

Refactoring has proven its value in a wide range of development projects–helping software professionals improve system designs, maintainability, extensibility, and performance. Now, for the first time, leading agile methodologist Scott Ambler and renowned consultant Pramodkumar Sadalage introduce powerful refactoring techniques specifically designed for database systems. Ambler and Sadalage demonstrate how small changes to table structures, data, stored procedures, and triggers can significantly enhance virtually any database design–without changing semantics. You’ll learn how to evolve database schemas in step with source code–and become far more effective in projects relying on iterative, agile methodologies. This comprehensive guide and reference helps you overcome the practical obstacles to refactoring real-world databases by covering every fundamental concept underlying database refactoring. Using start-to-finish examples, the authors walk you through refactoring simple standalone databas...

Update History of This Database - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us SKIP Stemcell Database Update History of This Database Date Update contents 2017/03/13 SKIP Stemcell Database... English archive site is opened. 2013/03/29 SKIP Stemcell Database ( https://www.skip.med.k...eio.ac.jp/SKIPSearch/top?lang=en ) is opened. About This Database Database Description Download License Update History of This Databa...se Site Policy | Contact Us Update History of This Database - SKIP Stemcell Database | LSDB Archive ...

A kinetics database and scripts for PHREEQC

Science.gov (United States)

Hu, B.; Zhang, Y.; Teng, Y.; Zhu, C.

2017-12-01

Kinetics of geochemical reactions has been increasingly used in numerical models to simulate coupled flow, mass transport, and chemical reactions. However, the kinetic data are scattered in the literature. To assemble a kinetic dataset for a modeling project is an intimidating task for most. In order to facilitate the application of kinetics in geochemical modeling, we assembled kinetics parameters into a database for the geochemical simulation program, PHREEQC (version 3.0). Kinetics data were collected from the literature. Our database includes kinetic data for over 70 minerals. The rate equations are also programmed into scripts with the Basic language. Using the new kinetic database, we simulated reaction path during the albite dissolution process using various rate equations in the literature. The simulation results with three different rate equations gave difference reaction paths at different time scale. Another application involves a coupled reactive transport model simulating the advancement of an acid plume in an acid mine drainage site associated with Bear Creek Uranium tailings pond. Geochemical reactions including calcite, gypsum, and illite were simulated with PHREEQC using the new kinetic database. The simulation results successfully demonstrated the utility of new kinetic database.

Evaluation of design parameters in soil-structure systems through artificial intelligence

International Nuclear Information System (INIS)

Cremonini, M.G.; Vardanega, C.; Parvis, E.

1989-01-01

This study refers to development of an artificial intelligence tool to evaluate design parameters for a soil-structure system as the foundations of Class 1 buildings of a nuclear power plant (NPP). This is based on an expert analysis of a large amount of information, collected during a comprehensive program of site investigations and laboratory tests and stored on a computer data-bank. The methodology comprises the following steps: organization of the available information on the site characteristics in a data-base; implementation and extensive use of a specific knowledge based expert system (KBES) devoted to both the analysis, interpretation and check of the information in the data-base, and to the evaluation of the design parameters; determination of effective access criteria to the data-base, for purposes of reordering the information and extracting design properties from a large number of experimental data; development of design profiles for both index properties and strength/strain parameters; and final evaluation of the design parameters. Results are obtained in the form of: local and general site stratigraphy; summarized soil index properties, detailing the site setting; static and dynamic stress-strain parameters, G/G max behavior and damping factors; condolidation parameters and OCR ratio; spatial distribution of parameters on site area; identification of specific local conditions; and cross correlation of parameters, thus covering the whole range of design parameters for NPP soil-structure systems

Effects of dispersion on electromagnetic parameters of tape-helix Blumlein pulse forming line of accelerator

International Nuclear Information System (INIS)

Zhang, Y.; Liu, J.L.; Feng, J.H.

2012-01-01

In this paper, the tape-helix model is introduced in the field of intense electron beam accelerator to analyze the dispersion effects on the electromagnetic parameters of helical Blumlein pulse forming line (PFL). Work band and dispersion relation of the PFL are analyzed, and the normalized coefficients of spatial harmonics are calculated. Dispersion effects on the important electromagnetic parameters of PFL, such as phase velocity, slow-wave coefficient, electric length and pulse duration, are analyzed as the central topic. In the PFL, electromagnetic waves with different frequencies in the work band of PFL have almost the same phase velocity. When de-ionized water, transformer oil and air are used as the PFL filling dielectric, respectively, the pulse duration of the helical Blumlein PFL is calculated as 479.6 ns, 81.1 ns and 53.1 ns in order. Electromagnetic wave simulation and experiments are carried out to demonstrate the theoretical calculations of the electric length and pulse duration which directly describe the phase velocity and dispersion of the PFL. Simulation results prove the theoretical analysis and calculation on pulse duration. Experiment is carried out based on the tape-helix Blumlein PFL and magnetic switch system. Experimental results show that the pulse durations are tested as 460 ns, 79 ns and 49 ns in order when de-ionized water, transformer oil and air are used respectively. Experimental results basically demonstrate the theoretical calculations and the analyses of dispersion. (authors)

Cyclotron Lines in Accreting Neutron Star Spectra

Science.gov (United States)

Wilms, Jörn; Schönherr, Gabriele; Schmid, Julia; Dauser, Thomas; Kreykenbohm, Ingo

2009-05-01

Cyclotron lines are formed through transitions of electrons between discrete Landau levels in the accretion columns of accreting neutron stars with strong (1012 G) magnetic fields. We summarize recent results on the formation of the spectral continuum of such systems, describe recent advances in the modeling of the lines based on a modification of the commonly used Monte Carlo approach, and discuss new results on the dependence of the measured cyclotron line energy from the luminosity of transient neutron star systems. Finally, we show that Simbol-X will be ideally suited to build and improve the observational database of accreting and strongly magnetized neutron stars.

Basic Test Framework for the Evaluation of Text Line Segmentation and Text Parameter Extraction

Directory of Open Access Journals (Sweden)

Darko Brodić

2010-05-01

Full Text Available Text line segmentation is an essential stage in off-line optical character recognition (OCR systems. It is a key because inaccurately segmented text lines will lead to OCR failure. Text line segmentation of handwritten documents is a complex and diverse problem, complicated by the nature of handwriting. Hence, text line segmentation is a leading challenge in handwritten document image processing. Due to inconsistencies in measurement and evaluation of text segmentation algorithm quality, some basic set of measurement methods is required. Currently, there is no commonly accepted one and all algorithm evaluation is custom oriented. In this paper, a basic test framework for the evaluation of text feature extraction algorithms is proposed. This test framework consists of a few experiments primarily linked to text line segmentation, skew rate and reference text line evaluation. Although they are mutually independent, the results obtained are strongly cross linked. In the end, its suitability for different types of letters and languages as well as its adaptability are its main advantages. Thus, the paper presents an efficient evaluation method for text analysis algorithms.

Diffusivity database (DDB) for major rocks. Database for the second progress report

Energy Technology Data Exchange (ETDEWEB)

Sato, Haruo

1999-10-01

A database for diffusivity for a data setting of effective diffusion coefficients in rock matrices in the second progress report, was developed. In this database, 3 kinds of diffusion coefficients: effective diffusion coefficient (De), apparent diffusion coefficient (Da) and free water diffusion coefficient (Do) were treated. The database, based on literatures published between 1980 and 1998, was developed considering the following points. (1) Since Japanese geological environment is focused in the second progress report, data for diffusion are collected focused on Japanese major rocks. (2) Although 22 elements are considered to be important in performance assessment for geological disposal, all elements and aquatic tracers are treated in this database development considering general purpose. (3) Since limestone, which belongs to sedimentary rock, can become one of the natural resources and is inappropriate as a host rock, it is omitted in this database development. Rock was categorized into 4 kinds of rocks; acid crystalline rock, alkaline crystalline rock, sedimentary rock (argillaceous/tuffaceous rock) and sedimentary rock (psammitic rock/sandy stone) from the viewpoint of geology and mass transport. In addition, rocks around neutrality among crystalline rock were categorized into the alkaline crystalline rock in this database. The database is composed of sub-databases for 4 kinds of rocks. Furthermore, the sub-databases for 4 kinds of the rocks are composed of databases to individual elements, in which totally, 24 items such as species, rock name, diffusion coefficients (De, Da, Do), obtained conditions (method, porewater, pH, Eh, temperature, atmosphere, etc.), etc. are input. As a result of literature survey, for De values for acid crystalline rock, totally, 207 data for 18 elements and one tracer (hydrocarbon) have been reported and all data were for granitic rocks such as granite, granodiorite and biotitic granite. For alkaline crystalline rock, totally, 32

Parameter calibration for synthesizing realistic-looking variability in offline handwriting

Science.gov (United States)

Cheng, Wen; Lopresti, Dan

2011-01-01

Motivated by the widely accepted principle that the more training data, the better a recognition system performs, we conducted experiments asking human subjects to do evaluate a mixture of real English handwritten text lines and text lines altered from existing handwriting with various distortion degrees. The idea of generating synthetic handwriting is based on a perturbation method by T. Varga and H. Bunke that distorts an entire text line. There are two purposes of our experiments. First, we want to calibrate distortion parameter settings for Varga and Bunke's perturbation model. Second, we intend to compare the effects of parameter settings on different writing styles: block, cursive and mixed. From the preliminary experimental results, we determined appropriate ranges for parameter amplitude, and found that parameter settings should be altered for different handwriting styles. With the proper parameter settings, it should be possible to generate large amount of training and testing data for building better off-line handwriting recognition systems.

Database design and database administration for a kindergarten

OpenAIRE

Vítek, Daniel

2009-01-01

The bachelor thesis deals with creation of database design for a standard kindergarten, installation of the designed database into the database system Oracle Database 10g Express Edition and demonstration of the administration tasks in this database system. The verification of the database was proved by a developed access application.

Disruption Warning Database Development and Exploratory Machine Learning Studies on Alcator C-Mod

Science.gov (United States)

Montes, Kevin; Rea, Cristina; Granetz, Robert

2017-10-01

A database of about 1800 shots from the 2015 campaign on the Alcator C-Mod tokamak is assembled, including disruptive and non-disruptive discharges. The database consists of 40 relevant plasma parameters with data taken from 160k time slices. In order to investigate the possibility of developing a robust disruption prediction algorithm that is tokamak-independent, we focused machine learning studies on a subset of dimensionless parameters such as βp, n /nG , etc. The Random Forests machine learning algorithm provides insight on the available data set by ranking the relative importance of the input features. Its application on the C-Mod database, however, reveals that virtually no one parameter has more importance than any other, and that its classification algorithm has a low rate of successfully predicted samples, as well as poor false positive and false negative rates. Comparing the analysis of this algorithm on the C-Mod database with its application to a similar database on DIII-D, we conclude that disruption prediction may not be feasible on C-Mod. This conclusion is supported by empirical observations that most C-Mod disruptions are caused by radiative collapse due to molybdenum from the first wall, which happens on just a 1-2ms timescale. Supported by the US Dept. of Energy under DE-FC02-99ER54512 and DE-FC02-04ER54698.

Greedy Sampling and Incremental Surrogate Model-Based Tailoring of Aeroservoelastic Model Database for Flexible Aircraft

Science.gov (United States)

Wang, Yi; Pant, Kapil; Brenner, Martin J.; Ouellette, Jeffrey A.

2018-01-01

This paper presents a data analysis and modeling framework to tailor and develop linear parameter-varying (LPV) aeroservoelastic (ASE) model database for flexible aircrafts in broad 2D flight parameter space. The Kriging surrogate model is constructed using ASE models at a fraction of grid points within the original model database, and then the ASE model at any flight condition can be obtained simply through surrogate model interpolation. The greedy sampling algorithm is developed to select the next sample point that carries the worst relative error between the surrogate model prediction and the benchmark model in the frequency domain among all input-output channels. The process is iterated to incrementally improve surrogate model accuracy till a pre-determined tolerance or iteration budget is met. The methodology is applied to the ASE model database of a flexible aircraft currently being tested at NASA/AFRC for flutter suppression and gust load alleviation. Our studies indicate that the proposed method can reduce the number of models in the original database by 67%. Even so the ASE models obtained through Kriging interpolation match the model in the original database constructed directly from the physics-based tool with the worst relative error far below 1%. The interpolated ASE model exhibits continuously-varying gains along a set of prescribed flight conditions. More importantly, the selected grid points are distributed non-uniformly in the parameter space, a) capturing the distinctly different dynamic behavior and its dependence on flight parameters, and b) reiterating the need and utility for adaptive space sampling techniques for ASE model database compaction. The present framework is directly extendible to high-dimensional flight parameter space, and can be used to guide the ASE model development, model order reduction, robust control synthesis and novel vehicle design of flexible aircraft.

Broadening of spectral lines of CO2, N2O , H2CO, HCN, and H2S by pressure of gases dominant in planetary atmospheres (H2, He and CO2)

Science.gov (United States)

Samuels, Shanelle; Gordon, Iouli; Tan, Yan

2018-01-01

HITRAN1,2 is a compilation of spectroscopic parameters that a variety of computer codes use to predict and simulate the transmission and emission of light in planetary atmospheres. The goal of this project is to add to the potential of the HITRAN database towards the exploration of the planetary atmospheres by including parameters describing broadening of spectral lines by H2, CO2, and He. These spectroscopic data are very important for the study of the hydrogen and helium-rich atmospheres of gas giants as well as rocky planets with volcanic activities, including Venus and Mars, since their atmospheres are dominated by CO2. First step in this direction was accomplished by Wilzewski et al.3 where this was done for SO2, NH3, HF, HCl, OCS and C2H2. The molecules investigated in this work were CO2, N2O, H2CO, HCN and H2S. Line-broadening coefficients, line shifts and temperature-dependence exponents for transitions of these molecules perturbed by H2, CO2 and He have been assembled from available peer-reviewed experimental and theoretical sources. The data was evaluated and the database was populated with these data and their extrapolations/interpolations using semi-empirical models that were developed to this end.Acknowledgements: Financial support from NASA PDART grant NNX16AG51G and the Smithsonian Astrophysical Observatory Latino Initiative Program from the Latino Initiatives Pool, administered by the Smithsonian Latino Center is gratefully acknowledged.References: 1. HITRAN online http://hitran.org/2. Gordon, I.E., Rothman, L.S., Hill, C., Kochanov, R.V., Tan, Y., et al., 2017. The HITRAN2016 Molecular Spectroscopic Database. J. Quant. Spectrosc. Radiat. Transf. doi:10.1016/j.jqsrt.2017.06.0383. Wilzewski, J.S., Gordon, I.E., Kochanov, R. V., Hill, C., Rothman, L.S., 2016. H2, He, and CO2 line-broadening coefficients, pressure shifts and temperature-dependence exponents for the HITRAN database. Part 1: SO2, NH3, HF, HCl, OCS and C2H2. J. Quant. Spectrosc. Radiat

TIGER/Line Shapefile, 2010, 2010 Census Block State-based

Data.gov (United States)

U.S. Environmental Protection Agency — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

Correlation between the line width and the line flux of the double-peaked broad Hα of 3C390.3

Science.gov (United States)

Zhang, Xue-Guang

2013-03-01

In this paper, we carefully check the correlation between the line width (second moment) and the line flux of the double-peaked broad Hα of the well-known mapped active galactic nucleus (AGN) 3C390.3 in order to show some further distinctions between double-peaked emitters and normal broad-line AGN. Based on the virialization assumption MBH ∝ RBLR × V2(BLR) and the empirical relation RBLR ∝ L˜0.5, one strong negative correlation between the line width and the line flux of the double-peaked broad lines should be expected for 3C390.3, such as the negative correlation confirmed for the mapped broad-line object NGC 5548, RBLR × V2(BLR) ∝ L˜0.5 × σ2 = constant. Moreover, based on the public spectra around 1995 from the AGN WATCH project for 3C390.3, one reliable positive correlation is found between the line width and the line flux of the double-peaked broad Hα. In the context of the proposed theoretical accretion disc model for double-peaked emitters, the unexpected positive correlation can be naturally explained, due to different time delays for the inner and outer parts of the disc-like broad-line region (BLR) of 3C390.3. Moreover, the virialization assumption is checked and found to be still available for 3C390.3. However, the time-varying size of the BLR of 3C390.3 cannot be expected by the empirical relation RBLR ∝ L˜0.5. In other words, the mean size of the BLR of 3C390.3 can be estimated by the continuum luminosity (line luminosity), while the continuum emission strengthening leads to the size of BLR decreasing (not increasing) in different moments for 3C390.3. Then, we compared our results of 3C390.3 with the previous results reported in the literature for the other double-peaked emitters, and found that before to clearly correct the effects from disc physical parameters varying (such as the effects of disc precession) for long-term observed line spectra, it is not so meaningful to discuss the correlation of the line parameters of double

Analysis of containment parameters during the main steam line break with the failure of the feedwater control valves

International Nuclear Information System (INIS)

Fabjan, L.; Petelin, S.; Mavko, B.; Gortnar, O.; Tiselj, I.

1992-01-01

U.S. Nuclear Regulatory Commission (NRC) information notice 91-69: 'Errors in Main Steam Line Break Analyses for Determining Containment Parameters' shows the possibility of an accident which could lead to beyond design containment pressure and temperature. Such accident would be caused by the continuation of feedwater flow following a main stream line break (MSLB) inside the containment. Krsko power plant already experienced problems with main feedwater control valves. For that reason, analysis of MSLB has been performed taking into account continuous feedwater addition scenario and different containment safety systems capabilities availability. Steam and water released into the containment during MSLB was calculated using RELAP5/MOD2 computer code. The containment response to MSLB was calculated using CONTEMPT-LT/028 computer code. The results indicated that the continuous feedwater flow following a MSLB could lead to beyond design containment pressure. The peak pressure and temperature depend on isolation time for main- and auxiliary-feedwater supply. In the case of low boron concentration injection, the core recriticality is characteristic for this type of accidents. It was concluded that the presented analysis of MSLB with continuous feedwater addition scenario is the worst case for containment design

Database Description - Open TG-GATEs Pathological Image Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Open TG-GATEs Pathological Image Database Database Description General information of database Database... name Open TG-GATEs Pathological Image Database Alternative name - DOI 10.18908/lsdba.nbdc00954-0...iomedical Innovation 7-6-8, Saito-asagi, Ibaraki-city, Osaka 567-0085, Japan TEL:81-72-641-9826 Email: Database... classification Toxicogenomics Database Organism Taxonomy Name: Rattus norvegi... Article title: Author name(s): Journal: External Links: Original website information Database

Data-based modelling of the Earth's dynamic magnetosphere: a review

Directory of Open Access Journals (Sweden)

N. A. Tsyganenko

2013-10-01

Full Text Available This paper reviews the main advances in the area of data-based modelling of the Earth's distant magnetic field achieved during the last two decades. The essence and the principal goal of the approach is to extract maximum information from available data, using physically realistic and flexible mathematical structures, parameterized by the most relevant and routinely accessible observables. Accordingly, the paper concentrates on three aspects of the modelling: (i mathematical methods to develop a computational "skeleton" of a model, (ii spacecraft databases, and (iii parameterization of the magnetospheric models by the solar wind drivers and/or ground-based indices. The review is followed by a discussion of the main issues concerning further progress in the area, in particular, methods to assess the models' performance and the accuracy of the field line mapping. The material presented in the paper is organized along the lines of the author Julius-Bartels' Medal Lecture during the General Assembly 2013 of the European Geosciences Union.

SOME ASPECTS REGARDING THE INTERNATIONAL DATABASES NOWADAYS

Directory of Open Access Journals (Sweden)

Emilian M. DOBRESCU

2015-01-01

Full Text Available A national database (NDB or an international one (abbreviated IDB, also named often as “data bank”, represents a method of storing some information and data on an external device (a storage device, with the possibility of an easy extension or an easy way to quickly find these information. Therefore, through IDB we don`t only understand a bibliometric or bibliographic index, which is a collection of references, that normally represents the “soft”, but also the respective IDB “hard”, which is the support and the storage technology. Usually, a database – a very comprehensive notion in the computer’s science – is a bibliographic index, compiled with specific purpose, objectives and means. In reality, the national and international databases are operated through management systems, usually electronic and informational, based on advanced manipulation technologies in the virtual space. On line encyclopedias can also be considered and are important international database (IDB. WorldCat, for example, is a world catalogue, that included the identification data for the books within circa 71.000 libraries in 112 countries, data classified through Online Computer Library Center (OCLC, with the participation of the libraries in the respective countries, especially of those that are national library.

Asymmetric Bimodal Exponential Power Distribution on the Real Line

Directory of Open Access Journals (Sweden)

Mehmet Niyazi Çankaya

2018-01-01

Full Text Available The asymmetric bimodal exponential power (ABEP distribution is an extension of the generalized gamma distribution to the real line via adding two parameters that fit the shape of peakedness in bimodality on the real line. The special values of peakedness parameters of the distribution are a combination of half Laplace and half normal distributions on the real line. The distribution has two parameters fitting the height of bimodality, so capacity of bimodality is enhanced by using these parameters. Adding a skewness parameter is considered to model asymmetry in data. The location-scale form of this distribution is proposed. The Fisher information matrix of these parameters in ABEP is obtained explicitly. Properties of ABEP are examined. Real data examples are given to illustrate the modelling capacity of ABEP. The replicated artificial data from maximum likelihood estimates of parameters of ABEP and other distributions having an algorithm for artificial data generation procedure are provided to test the similarity with real data. A brief simulation study is presented.

Database implementation to fluidized cracking catalytic-FCC process

International Nuclear Information System (INIS)

Santana, Antonio Otavio de; Dantas, Carlos Costa; Santos, Valdemir A. dos

2009-01-01

A process of Fluidized Cracking Catalytic (FCC) was developed by our research group. A cold model FCC unit, in laboratory scale, was used for obtaining of the data relative to the following parameters: air flow, system pressure, riser inlet pressure, rise outlet pressure, pressure drop in the riser, motor speed of catalyst injection and density. The measured of the density is made by gamma ray transmission. For the fact of the process of FCC not to have a database until then, the present work supplied this deficiency with the implementation of a database in connection with the Matlab software. The data from the FCC unit (laboratory model) are obtained as spreadsheet of the MS-Excel software. These spreadsheets were treated before importing them as database tables. The application of the process of normalization of database and the analysis done with the MS-Access in these spreadsheets treated revealed the need of an only relation (table) for to represent the database. The Database Manager System (DBMS) chosen has been the MS-Access by to satisfy our flow of data. The next step was the creation of the database, being built the table of data, the action query, selection query and the macro for to import data from the unit FCC in study. Also an interface between the application 'Database Toolbox' (Matlab2008a) and the database was created. This was obtained through the drivers ODBC (Open Data Base Connectivity). This interface allows the manipulation of the database by the users operating in the Matlab. (author)

Database implementation to fluidized cracking catalytic-FCC process

Energy Technology Data Exchange (ETDEWEB)

Santana, Antonio Otavio de; Dantas, Carlos Costa, E-mail: aos@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Santos, Valdemir A. dos, E-mail: valdemir.alexandre@pq.cnpq.b [Universidade Catolica de Pernambuco, Recife, PE (Brazil). Centro de Ciencia e Tecnologia

2009-07-01

A process of Fluidized Cracking Catalytic (FCC) was developed by our research group. A cold model FCC unit, in laboratory scale, was used for obtaining of the data relative to the following parameters: air flow, system pressure, riser inlet pressure, rise outlet pressure, pressure drop in the riser, motor speed of catalyst injection and density. The measured of the density is made by gamma ray transmission. For the fact of the process of FCC not to have a database until then, the present work supplied this deficiency with the implementation of a database in connection with the Matlab software. The data from the FCC unit (laboratory model) are obtained as spreadsheet of the MS-Excel software. These spreadsheets were treated before importing them as database tables. The application of the process of normalization of database and the analysis done with the MS-Access in these spreadsheets treated revealed the need of an only relation (table) for to represent the database. The Database Manager System (DBMS) chosen has been the MS-Access by to satisfy our flow of data. The next step was the creation of the database, being built the table of data, the action query, selection query and the macro for to import data from the unit FCC in study. Also an interface between the application 'Database Toolbox' (Matlab2008a) and the database was created. This was obtained through the drivers ODBC (Open Data Base Connectivity). This interface allows the manipulation of the database by the users operating in the Matlab. (author)

Development of the LEP high level control system using ORACLE as an online database

International Nuclear Information System (INIS)

Bailey, R.; Belk, A.; Collier, P.; Lamont, M.; De Rijk, G.; Tarrant, M.

1994-01-01

A complete rewrite of the high level application software for the control of LEP has been carried out. ORACLE was evaluated and subsequently used as the on-line database in the implementation of the system. All control information and settings are stored on this database. This paper describes the project development cycle, the method used, the use of CASE and the project management used by the team. The performance of the system and the database and their impact on the LEP performance is discussed. ((orig.))

HATCHES - a thermodynamic database and management system

International Nuclear Information System (INIS)

Cross, J.E.; Ewart, F.T.

1990-03-01

The Nirex Safety Assessment Research Programme has been compiling the thermodynamic data necessary to allow simulations of the aqueous behaviour of the elements important to radioactive waste disposal to be made. These data have been obtained from the literature, when available, and validated for the conditions of interest by experiment. In order to maintain these data in an accessible form and to satisfy quality assurance on all data used for assessments, a database has been constructed which resides on a personal computer operating under MS-DOS using the Ashton-Tate dBase III program. This database contains all the input data fields required by the PHREEQE program and, in addition, a body of text which describes the source of the data and the derivation of the PHREEQE input parameters from the source data. The HATCHES system consists of this database, a suite of programs to facilitate the searching and listing of data and a further suite of programs to convert the dBase III files to PHREEQE database format. (Author)

THE Be STAR SPECTRA (BeSS) DATABASE

International Nuclear Information System (INIS)

Neiner, C.; De Batz, B.; Cochard, F.; Floquet, M.; Mekkas, A.; Desnoux, V.

2011-01-01

Be stars vary on many timescales, from hours to decades. A long time base of observations to analyze certain phenomena in these stars is therefore necessary. Collecting all existing and future Be star spectra into one database has thus emerged as an important tool for the Be star community. Moreover, for statistical studies, it is useful to have centralized information on all known Be stars via an up-to-date catalog. These two goals are what the Be Star Spectra (BeSS, http://basebe.obspm.fr) database proposes to achieve. The database contains an as-complete-as-possible catalog of known Be stars with stellar parameters, as well as spectra of Be stars from all origins (any wavelength, any epoch, any resolution, etc.). It currently contains over 54,000 spectra of more than 600 different Be stars among the ∼2000 Be stars in the catalog. A user can access and query this database to retrieve information on Be stars or spectra. Registered members can also upload spectra to enrich the database. Spectra obtained by professional as well as amateur astronomers are individually validated in terms of format and science before being included in BeSS. In this paper, we present the database itself as well as examples of the use of BeSS data in terms of statistics and the study of individual stars.

ODG: Omics database generator - a tool for generating, querying, and analyzing multi-omics comparative databases to facilitate biological understanding.

Science.gov (United States)

Guhlin, Joseph; Silverstein, Kevin A T; Zhou, Peng; Tiffin, Peter; Young, Nevin D

2017-08-10

Rapid generation of omics data in recent years have resulted in vast amounts of disconnected datasets without systemic integration and knowledge building, while individual groups have made customized, annotated datasets available on the web with few ways to link them to in-lab datasets. With so many research groups generating their own data, the ability to relate it to the larger genomic and comparative genomic context is becoming increasingly crucial to make full use of the data. The Omics Database Generator (ODG) allows users to create customized databases that utilize published genomics data integrated with experimental data which can be queried using a flexible graph database. When provided with omics and experimental data, ODG will create a comparative, multi-dimensional graph database. ODG can import definitions and annotations from other sources such as InterProScan, the Gene Ontology, ENZYME, UniPathway, and others. This annotation data can be especially useful for studying new or understudied species for which transcripts have only been predicted, and rapidly give additional layers of annotation to predicted genes. In better studied species, ODG can perform syntenic annotation translations or rapidly identify characteristics of a set of genes or nucleotide locations, such as hits from an association study. ODG provides a web-based user-interface for configuring the data import and for querying the database. Queries can also be run from the command-line and the database can be queried directly through programming language hooks available for most languages. ODG supports most common genomic formats as well as generic, easy to use tab-separated value format for user-provided annotations. ODG is a user-friendly database generation and query tool that adapts to the supplied data to produce a comparative genomic database or multi-layered annotation database. ODG provides rapid comparative genomic annotation and is therefore particularly useful for non-model or

Aspects of quality assurance in a thermodynamic Mg alloy database

Energy Technology Data Exchange (ETDEWEB)

Schmid-Fetzer, R.; Janz, A.; Groebner, J.; Ohno, M. [Clausthal University of Technology, Institute of Metallurgy, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany)

2005-12-01

Quality assurance is a major concern for large thermodynamic databases. Examples for standard tests on phase diagrams, thermodynamic functions or parameters will be shown that are of practical use in checking consistency and plausibility. The typical end user, applying the database to a real multicomponent material or process, will generally not have sufficient time, resources, and experience to perform the quality check himself. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

Analysis of high accuracy, quantitative proteomics data in the MaxQB database.

Science.gov (United States)

Schaab, Christoph; Geiger, Tamar; Stoehr, Gabriele; Cox, Juergen; Mann, Matthias

2012-03-01

MS-based proteomics generates rapidly increasing amounts of precise and quantitative information. Analysis of individual proteomic experiments has made great strides, but the crucial ability to compare and store information across different proteome measurements still presents many challenges. For example, it has been difficult to avoid contamination of databases with low quality peptide identifications, to control for the inflation in false positive identifications when combining data sets, and to integrate quantitative data. Although, for example, the contamination with low quality identifications has been addressed by joint analysis of deposited raw data in some public repositories, we reasoned that there should be a role for a database specifically designed for high resolution and quantitative data. Here we describe a novel database termed MaxQB that stores and displays collections of large proteomics projects and allows joint analysis and comparison. We demonstrate the analysis tools of MaxQB using proteome data of 11 different human cell lines and 28 mouse tissues. The database-wide false discovery rate is controlled by adjusting the project specific cutoff scores for the combined data sets. The 11 cell line proteomes together identify proteins expressed from more than half of all human genes. For each protein of interest, expression levels estimated by label-free quantification can be visualized across the cell lines. Similarly, the expression rank order and estimated amount of each protein within each proteome are plotted. We used MaxQB to calculate the signal reproducibility of the detected peptides for the same proteins across different proteomes. Spearman rank correlation between peptide intensity and detection probability of identified proteins was greater than 0.8 for 64% of the proteome, whereas a minority of proteins have negative correlation. This information can be used to pinpoint false protein identifications, independently of peptide database

An Iterative Optimization Algorithm for Lens Distortion Correction Using Two-Parameter Models

Directory of Open Access Journals (Sweden)

Daniel Santana-Cedrés

2016-12-01

Full Text Available We present a method for the automatic estimation of two-parameter radial distortion models, considering polynomial as well as division models. The method first detects the longest distorted lines within the image by applying the Hough transform enriched with a radial distortion parameter. From these lines, the first distortion parameter is estimated, then we initialize the second distortion parameter to zero and the two-parameter model is embedded into an iterative nonlinear optimization process to improve the estimation. This optimization aims at reducing the distance from the edge points to the lines, adjusting two distortion parameters as well as the coordinates of the center of distortion. Furthermore, this allows detecting more points belonging to the distorted lines, so that the Hough transform is iteratively repeated to extract a better set of lines until no improvement is achieved. We present some experiments on real images with significant distortion to show the ability of the proposed approach to automatically correct this type of distortion as well as a comparison between the polynomial and division models.

Analysis of glottal source parameters in Parkinsonian speech.

Science.gov (United States)

Hanratty, Jane; Deegan, Catherine; Walsh, Mary; Kirkpatrick, Barry

2016-08-01

Diagnosis and monitoring of Parkinson's disease has a number of challenges as there is no definitive biomarker despite the broad range of symptoms. Research is ongoing to produce objective measures that can either diagnose Parkinson's or act as an objective decision support tool. Recent research on speech based measures have demonstrated promising results. This study aims to investigate the characteristics of the glottal source signal in Parkinsonian speech. An experiment is conducted in which a selection of glottal parameters are tested for their ability to discriminate between healthy and Parkinsonian speech. Results for each glottal parameter are presented for a database of 50 healthy speakers and a database of 16 speakers with Parkinsonian speech symptoms. Receiver operating characteristic (ROC) curves were employed to analyse the results and the area under the ROC curve (AUC) values were used to quantify the performance of each glottal parameter. The results indicate that glottal parameters can be used to discriminate between healthy and Parkinsonian speech, although results varied for each parameter tested. For the task of separating healthy and Parkinsonian speech, 2 out of the 7 glottal parameters tested produced AUC values of over 0.9.

Proven GIS adaptions by other industries benefit pipe lines

International Nuclear Information System (INIS)

Sanders, M.D.

1994-01-01

Automated mapping (AM) and facilities management (FM) projects in the pipe line industry are becoming increasingly desirable applications of geographic information system (GIS) technology. In the vernacular of GIS technology, application for the pipe line industry are commonly referred to as automated mapping and facilities management (AM/FM). Computer software allows the use of computer aided drafting (CAD) and database packages for information storage/retrieval to provide displays and reports of data set relationships in a given location and area. Geographic information management technology has grown to meet the expanding database resource capabilities. This technological growth also has combined with increasingly powerful and efficient computer systems and networks with plummeting hardware, software, and network enhancement costs. This paper discusses Regulatory compliance, planning, implementation, and data sharing process of the GIS

SINGLE-LINED SPECTROSCOPIC BINARY STAR CANDIDATES IN THE RAVE SURVEY

International Nuclear Information System (INIS)

Matijevic, G.; Zwitter, T.; Bienayme, O.; Siebert, A.; Watson, F. G.; Bland-Hawthorn, J.; Parker, Q. A.; Freeman, K. C.; Gilmore, G.; Grebel, E. K.; Helmi, A.; Munari, U.; Siviero, A.; Navarro, J. F.; Reid, W.; Seabroke, G. M.; Steinmetz, M.; Williams, M.; Wyse, R. F. G.

2011-01-01

Repeated spectroscopic observations of stars in the RAdial Velocity Experiment (RAVE) database are used to identify and examine single-lined binary (SB1) candidates. The RAVE latest internal database (VDR3) includes radial velocities, atmospheric parameters, and other parameters for approximately a quarter of a million different stars with slightly less than 300,000 observations. In the sample of ∼20,000 stars observed more than once, 1333 stars with variable radial velocities were identified. Most of them are believed to be SB1 candidates. The fraction of SB1 candidates among stars with several observations is between 10% and 15% which is the lower limit for binarity among RAVE stars. Due to the distribution of time spans between the re-observation that is biased toward relatively short timescales (days to weeks), the periods of the identified SB1 candidates are most likely in the same range. Because of the RAVE's narrow magnitude range most of the dwarf candidates belong to the thin Galactic disk while the giants are part of the thick disk with distances extending to up to a few kpc. The comparison of the list of SB1 candidates to the VSX catalog of variable stars yielded several pulsating variables among the giant population with radial velocity variations of up to few tens of km s -1 . There are 26 matches between the catalog of spectroscopic binary orbits (S B 9 ) and the whole RAVE sample for which the given periastron time and the time of RAVE observation were close enough to yield a reliable comparison. RAVE measurements of radial velocities of known spectroscopic binaries are consistent with their published radial velocity curves.

Update History of This Database - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Update History of This Database Date Update contents 201...0/03/29 Yeast Interacting Proteins Database English archive site is opened. 2000/12/4 Yeast Interacting Proteins Database...( http://itolab.cb.k.u-tokyo.ac.jp/Y2H/ ) is released. About This Database Database Description... Download License Update History of This Database Site Policy | Contact Us Update History of This Database... - Yeast Interacting Proteins Database | LSDB Archive ...

Database Description - RMOS | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name RMOS Alternative nam...arch Unit Shoshi Kikuchi E-mail : Database classification Plant databases - Rice Microarray Data and other Gene Expression Database...s Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description The Ric...19&lang=en Whole data download - Referenced database Rice Expression Database (RED) Rice full-length cDNA Database... (KOME) Rice Genome Integrated Map Database (INE) Rice Mutant Panel Database (Tos17) Rice Genome Annotation Database

Biogas composition and engine performance, including database and biogas property model

NARCIS (Netherlands)

Bruijstens, A.J.; Beuman, W.P.H.; Molen, M. van der; Rijke, J. de; Cloudt, R.P.M.; Kadijk, G.; Camp, O.M.G.C. op den; Bleuanus, W.A.J.

2008-01-01

In order to enable this evaluation of the current biogas quality situation in the EU; results are presented in a biogas database. Furthermore the key gas parameter Sonic Bievo Index (influence on open loop A/F-ratio) is defined and other key gas parameters like the Methane Number (knock resistance)

TabSQL: a MySQL tool to facilitate mapping user data to public databases.

Science.gov (United States)

Xia, Xiao-Qin; McClelland, Michael; Wang, Yipeng

2010-06-23

With advances in high-throughput genomics and proteomics, it is challenging for biologists to deal with large data files and to map their data to annotations in public databases. We developed TabSQL, a MySQL-based application tool, for viewing, filtering and querying data files with large numbers of rows. TabSQL provides functions for downloading and installing table files from public databases including the Gene Ontology database (GO), the Ensembl databases, and genome databases from the UCSC genome bioinformatics site. Any other database that provides tab-delimited flat files can also be imported. The downloaded gene annotation tables can be queried together with users' data in TabSQL using either a graphic interface or command line. TabSQL allows queries across the user's data and public databases without programming. It is a convenient tool for biologists to annotate and enrich their data.

Reliability parameters of distribution networks components

Energy Technology Data Exchange (ETDEWEB)

Gono, R.; Kratky, M.; Rusek, S.; Kral, V. [Technical Univ. of Ostrava (Czech Republic)

2009-03-11

This paper presented a framework for the retrieval of parameters from various heterogenous power system databases. The framework was designed to transform the heterogenous outage data in a common relational scheme. The framework was used to retrieve outage data parameters from the Czech and Slovak republics in order to demonstrate the scalability of the framework. A reliability computation of the system was computed in 2 phases representing the retrieval of component reliability parameters and the reliability computation. Reliability rates were determined using component reliability and global reliability indices. Input data for the reliability was retrieved from data on equipment operating under similar conditions, while the probability of failure-free operations was evaluated by determining component status. Anomalies in distribution outage data were described as scheme, attribute, and term differences. Input types consisted of input relations; transformation programs; codebooks; and translation tables. The system was used to successfully retrieve data from 7 distributors in the Czech Republic and Slovak Republic between 2000-2007. The database included 301,555 records. Data were queried using SQL language. 29 refs., 2 tabs., 2 figs.

The construction and application of the AMSR-E global microwave emissivity database

International Nuclear Information System (INIS)

Lijuan, Shi; Wenbo, Wu; Yubao, Qiu; Jingjing, Niu

2014-01-01

Land surface microwave emissivity is an important parameter to describe the characteristics of terrestrial microwave radiation, and is the necessary input amount for inversion various geophysical parameters. We use brightness temperature of the Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E) and synchronous land surface temperature and atmospheric temperature-humidity profile data obtained from the MODIS which aboard on satellite AQUA the same as AMSR-E, to retrieved microwave emissivity under clear sky conditions. After quality control, evaluation and design, the global microwave emissivity database of AMSR-E under clear sky conditions is established. This database include 2002–2011 years, different regions, different surface coverage, dual-polarized, 6.9,10.65, 18.7, 23.8, 36.5 and 89GHz, ascending and descending orbit, spatial resolution 25km, global 0.05 degrees, instantaneous and half-month averaged emissivity data. The database can provide the underlying surface information for precipitation algorithm, water-vapor algorithm, and long-resolution mode model (General Circulation Model (GCM) etc.). It also provides underlying surface information for the satellite simulator, and provides basic prior knowledge of land surface radiation for future satellite sensors design. The emissivity database or the fast emissivity obtained can get ready for climate model, energy balance, data assimilation, geophysical model simulation, inversion and estimates of the physical parameters under the cloud cover conditions

Lessons Learned from resolving massive IPS database change for SPADES+

International Nuclear Information System (INIS)

Kim, Jin-Soo

2016-01-01

Safety Parameter Display and Evaluation System+ (SPADES+) was implemented to meet the requirements for Safety Parameter Display System (SPDS) which are related to TMI Action Plan requirements. SPADES+ monitors continuously the critical safety function during normal, abnormal, and emergency operation mode and generates the alarm output to the alarm server when the tolerance related to safety functions are not satisfied. The alarm algorithm for critical safety function is performed in the NSSS Application Software (NAPS) server of the Information Process System (IPS) and the calculation result will be displayed on the flat panel display (FPD) of the IPS. SPADES+ provides the critical variable to the control room operators to aid them in rapidly and reliable determining the safety status of the plant. Many database point ID names (518 points) were changed. POINT_ID is used in the programming source code, the related documents such as SDS and SRS, and Graphic database. To reduce human errors, computer program and office program’s Macro are used. Though the automatic methods are used for changing POINT_IDs, it takes lots of time to resolve for editing the change list except for making computerized solutions. In IPS, there are many more programs than SPADES+ and over 30,000 POINT_IDs are in IPS database. Changing POINT_IDs could be a burden to software engineers. In case of Ovation system database, there is the Alias field to prevent this kind of problem. The Alias is a kind of secondary key in database

KALIMER database development (database configuration and design methodology)

International Nuclear Information System (INIS)

Jeong, Kwan Seong; Kwon, Young Min; Lee, Young Bum; Chang, Won Pyo; Hahn, Do Hee

2001-10-01

KALIMER Database is an advanced database to utilize the integration management for Liquid Metal Reactor Design Technology Development using Web Applicatins. KALIMER Design database consists of Results Database, Inter-Office Communication (IOC), and 3D CAD database, Team Cooperation system, and Reserved Documents, Results Database is a research results database during phase II for Liquid Metal Reactor Design Technology Develpment of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD Database is s schematic design overview for KALIMER. Team Cooperation System is to inform team member of research cooperation and meetings. Finally, KALIMER Reserved Documents is developed to manage collected data and several documents since project accomplishment. This report describes the features of Hardware and Software and the Database Design Methodology for KALIMER

A computed room temperature line list for phosphine

Science.gov (United States)

Sousa-Silva, Clara; Yurchenko, Sergei N.; Tennyson, Jonathan

2013-06-01

An accurate and comprehensive room temperature rotation-vibration transition line list for phosphine (31PH3) is computed using a newly refined potential energy surface and a previously constructed ab initio electric dipole moment surface. Energy levels, Einstein A coefficients and transition intensities are computed using these surfaces and a variational approach to the nuclear motion problem as implemented in the program TROVE. A ro-vibrational spectrum is computed, covering the wavenumber range 0-8000 cm-1. The resulting line list, which is appropriate for temperatures up to 300 K, consists of a total of 137 million transitions between 5.6 million energy levels. Several of the band centres are shifted to better match experimental transition frequencies. The line list is compared to the most recent HITRAN database and other laboratorial sources. Transition wavelengths and intensities are generally found to be in good agreement with the existing experimental data, with particularly close agreement for the rotational spectrum. An analysis of the comparison between the theoretical data created and the existing experimental data is performed, and suggestions for future improvements and assignments to the HITRAN database are made.

Mooring Line Damping Estimation for a Floating Wind Turbine

Directory of Open Access Journals (Sweden)

Dongsheng Qiao

2014-01-01

Full Text Available The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT. Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

Mooring line damping estimation for a floating wind turbine.

Science.gov (United States)

Qiao, Dongsheng; Ou, Jinping

2014-01-01

The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

Measurements of gas parameters in plasma-assisted supersonic combustion processes using diode laser spectroscopy

International Nuclear Information System (INIS)

Bolshov, Mikhail A; Kuritsyn, Yu A; Liger, V V; Mironenko, V R; Leonov, S B; Yarantsev, D A

2009-01-01

We report a procedure for temperature and water vapour concentration measurements in an unsteady-state combustion zone using diode laser absorption spectroscopy. The procedure involves measurements of the absorption spectrum of water molecules around 1.39 μm. It has been used to determine hydrogen combustion parameters in M = 2 gas flows in the test section of a supersonic wind tunnel. The relatively high intensities of the absorption lines used have enabled direct absorption measurements. We describe a differential technique for measurements of transient absorption spectra, the procedure we used for primary data processing and approaches for determining the gas temperature and H 2 O concentration in the probed zone. The measured absorption spectra are fitted with spectra simulated using parameters from spectroscopic databases. The combustion-time-averaged (∼50 ms) gas temperature and water vapour partial pressure in the hot wake region are determined to be 1050 K and 21 Torr, respectively. The large signal-to-noise ratio in our measurements allowed us to assess the temporal behaviour of these parameters. The accuracy in our temperature measurements in the probed zone is ∼40 K. (laser applications and other topics in quantum electronics)

MICROARRAY IMAGE GRIDDING USING GRID LINE REFINEMENT TECHNIQUE

Directory of Open Access Journals (Sweden)

V.G. Biju

2015-05-01

Full Text Available An important stage in microarray image analysis is gridding. Microarray image gridding is done to locate sub arrays in a microarray image and find co-ordinates of spots within each sub array. For accurate identification of spots, most of the proposed gridding methods require human intervention. In this paper a fully automatic gridding method which enhances spot intensity in the preprocessing step as per a histogram based threshold method is used. The gridding step finds co-ordinates of spots from horizontal and vertical profile of the image. To correct errors due to the grid line placement, a grid line refinement technique is proposed. The algorithm is applied on different image databases and results are compared based on spot detection accuracy and time. An average spot detection accuracy of 95.06% depicts the proposed method’s flexibility and accuracy in finding the spot co-ordinates for different database images.

Statistical mechanics of flux lines in high-temperature superconductors

International Nuclear Information System (INIS)

Dasgupta, C.

1992-01-01

The shortness of the low temperature coherence lengths of high T c materials leads to new mechanisms of pinning of flux lines. Lattice periodic modulations of the order parameters itself acts to pin vortex lines in regions of the unit cell were the order parameter is small. A presentation of flux creep and flux noise at low temperature and magnetic fields in terms of motion of simple metastable defects on flux lines is made, with a calculation of flux lattice melting. 12 refs

View discovery in OLAP databases through statistical combinatorial optimization

Energy Technology Data Exchange (ETDEWEB)

Hengartner, Nick W [Los Alamos National Laboratory; Burke, John [PNNL; Critchlow, Terence [PNNL; Joslyn, Cliff [PNNL; Hogan, Emilie [PNNL

2009-01-01

OnLine Analytical Processing (OLAP) is a relational database technology providing users with rapid access to summary, aggregated views of a single large database, and is widely recognized for knowledge representation and discovery in high-dimensional relational databases. OLAP technologies provide intuitive and graphical access to the massively complex set of possible summary views available in large relational (SQL) structured data repositories. The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of 'views' of an OLAP database as a combinatorial object of all projections and subsets, and 'view discovery' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline 'hop-chaining' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a 'spiraling' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

NIST Photoionization of CO2 (ARPES) Database

Science.gov (United States)

SRD 119 NIST Photoionization of CO2 (ARPES) Database (Web, free access)   CO2 is studied using dispersed synchrotron radiation in the 650 Å to 850 Å spectral region. The vibrationally resolved photoelectron spectra are analyzed to generate relative vibrational transition amplitudes and the angular asymmetry parameters describing the various transitions observed.

An Integrated Enterprise Accelerator Database for the SLC Control System

International Nuclear Information System (INIS)

2002-01-01

Since its inception in the early 1980's, the SLC Control System has been driven by a highly structured memory-resident real-time database. While efficient, its rigid structure and file-based sources makes it difficult to maintain and extract relevant information. The goal of transforming the sources for this database into a relational form is to enable it to be part of a Control System Enterprise Database that is an integrated central repository for SLC accelerator device and Control System data with links to other associated databases. We have taken the concepts developed for the NLC Enterprise Database and used them to create and load a relational model of the online SLC Control System database. This database contains data and structure to allow querying and reporting on beamline devices, their associations and parameters. In the future this will be extended to allow generation of EPICS and SLC database files, setup of applications and links to other databases such as accelerator maintenance, archive data, financial and personnel records, cabling information, documentation etc. The database is implemented using Oracle 8i. In the short term it will be updated daily in batch from the online SLC database. In the longer term, it will serve as the primary source for Control System static data, an R and D platform for the NLC, and contribute to SLC Control System operations

R2 Combined Statistical Area (CSA), 2013; TIGER/Line Shapefile

Data.gov (United States)

U.S. Environmental Protection Agency — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

Study of neoclassical transport in LHD plasmas by applying the DCOM/NNW neoclassical transport database

International Nuclear Information System (INIS)

Wakasa, Arimitsu; Oikawa, Shun-ichi; Murakami, Sadayoshi

2008-01-01

In helical systems, neoclassical transport is one of the important issues in addition to anomalous transport, because of a strong temperature dependency of heat conductivity and an important role in the radial electric field determination. Therefore, the development of a reliable tool for the neoclassical transport analysis is necessary for the transport analysis in Large Helical Device (LHD). We have developed a neoclassical transport database for LHD plasmas, DCOM/NNW, where mono-energetic diffusion coefficients are evaluated by the Monte Carlo method, and the diffusion coefficient database is constructed by a neural network technique. The input parameters of the database are the collision frequency, radial electric field, minor radius, and configuration parameters (R axis , beta value, etc). In this paper, database construction including the plasma beta is investigated. A relatively large Shafranov shift occurs in the finite beta LHD plasma, and the magnetic field configuration becomes complex leading to rapid increase in the number of the Fourier modes in Boozer coordinates. DCOM/NNW can evaluate neoclassical transport accurately even in such a configuration with a large number of Fourier modes. The developed DCOM/NNW database is applied to a finite-beta LHD plasma, and the plasma parameter dependences of neoclassical transport coefficients and the ambipolar radial electric field are investigated. (author)

The European Fusion Material properties database

Energy Technology Data Exchange (ETDEWEB)

Karditsas, P.J. [UKAEA Fusion, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)]. E-mail: panos.karditsas@ukaea.org.uk; Lloyd, G. [Tessella Support Services plc, 3 Vineyard Chambers, Abingdon OX14 3PX (United Kingdom); Walters, M. [Tessella Support Services plc, 3 Vineyard Chambers, Abingdon OX14 3PX (United Kingdom); Peacock, A. [EFDA Close Support Unit, Garching D-85748 (Germany)

2006-02-15

Materials research represents a significant part of the European and world effort on fusion research. A European Fusion Materials web-based relational database is being developed to collect, expand and preserve for the future the data produced in support of the NET, DEMO and ITER. The database allows understanding of material properties and their critical parameters for fusion environments. The system uses J2EE technologies and the PostgreSQL relational database, and flexibility ensures that new methods to automate material design for specific applications can be easily implemented. It runs on a web server and allows users access via the Internet using their preferred web browser. The database allows users to store, browse and search raw tests, material properties and qualified data, and electronic reports. For data security, users are issued with individual accounts, and the origin of all requests is checked against a list of trusted sites. Different user accounts have access to different datasets to ensure the data is not shared unintentionally. The system allows several levels of data checking/cleaning and validation. Data insertion is either online or through downloaded templates, and validation is through different expert groups, which can apply different criteria to the data.

Database Description - SAHG | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name SAHG Alternative nam...h: Contact address Chie Motono Tel : +81-3-3599-8067 E-mail : Database classification Structure Databases - ...e databases - Protein properties Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database description... Links: Original website information Database maintenance site The Molecular Profiling Research Center for D...stration Not available About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Database Description - SAHG | LSDB Archive ...

Use of a German longitudinal prescription database (LRx) in pharmacoepidemiology.

Science.gov (United States)

Richter, Hartmut; Dombrowski, Silvia; Hamer, Hajo; Hadji, Peyman; Kostev, Karel

2015-01-01

Large epidemiological databases are often used to examine matters pertaining to drug utilization, health services, and drug safety. The major strength of such databases is that they include large sample sizes, which allow precise estimates to be made. The IMS® LRx database has in recent years been used as a data source for epidemiological research. The aim of this paper is to review a number of recent studies published with the aid of this database and compare these with the results of similar studies using independent data published in the literature. In spite of being somewhat limited to studies for which comparative independent results were available, it was possible to include a wide range of possible uses of the LRx database in a variety of therapeutic fields: prevalence/incidence rate determination (diabetes, epilepsy), persistence analyses (diabetes, osteoporosis), use of comedication (diabetes), drug utilization (G-CSF market) and treatment costs (diabetes, G-CSF market). In general, the results of the LRx studies were found to be clearly in line with previously published reports. In some cases, noticeable discrepancies between the LRx results and the literature data were found (e.g. prevalence in epilepsy, persistence in osteoporosis) and these were discussed and possible reasons presented. Overall, it was concluded that the IMS® LRx database forms a suitable database for pharmacoepidemiological studies.

TIGER/Line Shapefile, 2015, nation, U.S., Rails National Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

TIGER/Line Shapefile, 2017, nation, U.S., Coastline National Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

TIGER/Line Shapefile, 2016, nation, U.S., Rails National Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

TIGER/Line Shapefile, 2016, nation, U.S., Coastline National Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

TIGER/Line Shapefile, 2015, nation, U.S., Coastline National Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master...

Determination of edge plasma parameters by a genetic algorithm analysis of spectral line shapes

Energy Technology Data Exchange (ETDEWEB)

Marandet, Y.; Genesio, P.; Godbert-Mouret, L.; Koubiti, M.; Stamm, R. [Universite de Provence (PIIM), Centre de Saint-Jerome, 13 - Marseille (France); Capes, H.; Guirlet, R. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

2003-07-01

Comparing an experimental and a theoretical line shape can be achieved by a genetic algorithm (GA) based on an analogy to the mechanisms of natural selection. Such an algorithm is able to deal with complex non-linear models, and can avoid local minima. We have used this optimization tool in the context of edge plasma spectroscopy, for a determination of the temperatures and fractions of the various populations of neutral deuterium emitting the D{sub {alpha}} line in 2 configurations of Tore-Supra: ergodic divertor and toroidal pumped limiter. Using the GA fit, the neutral emitters are separated into up to 4 populations which can be identified as resulting from molecular dissociation reactions, charge exchange, or reflection. In all the edge plasmas studied, a significant fraction of neutrals emit in the line wings, leading to neutrals with a temperature up to a few hundreds eV if a Gaussian line shape is assumed. This conclusion could be modified if the line wing exhibits a non Gaussian behavior.

Determination of edge plasma parameters by a genetic algorithm analysis of spectral line shapes

International Nuclear Information System (INIS)

Marandet, Y.; Genesio, P.; Godbert-Mouret, L.; Koubiti, M.; Stamm, R.; Capes, H.; Guirlet, R.

2003-01-01

Comparing an experimental and a theoretical line shape can be achieved by a genetic algorithm (GA) based on an analogy to the mechanisms of natural selection. Such an algorithm is able to deal with complex non-linear models, and can avoid local minima. We have used this optimization tool in the context of edge plasma spectroscopy, for a determination of the temperatures and fractions of the various populations of neutral deuterium emitting the D α line in 2 configurations of Tore-Supra: ergodic divertor and toroidal pumped limiter. Using the GA fit, the neutral emitters are separated into up to 4 populations which can be identified as resulting from molecular dissociation reactions, charge exchange, or reflection. In all the edge plasmas studied, a significant fraction of neutrals emit in the line wings, leading to neutrals with a temperature up to a few hundreds eV if a Gaussian line shape is assumed. This conclusion could be modified if the line wing exhibits a non Gaussian behavior

Oracle Enterprise Manager 12c command-line interface

CERN Document Server

Pot'Vin, Kellyn; Smith, Ray

2014-01-01

Oracle Enterprise Manager 12c Command-Line Interface shows how to use Enterprise Manager's powerful scripting language to automate your database administration work and save time by scripting routine tasks, and then executing those scripts across collections of databases and instances in your environment. This book is chock full of ready-made scripting examples contributed by the authors and leading members of the community. For example, you'll find scripts and examples of commands to: Remove an Enterprise Manager agent and its related targetsQuickly create administrator accounts that are ful

Database Description - PSCDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name PSCDB Alternative n...rial Science and Technology (AIST) Takayuki Amemiya E-mail: Database classification Structure Databases - Protein structure Database...554-D558. External Links: Original website information Database maintenance site Graduate School of Informat...available URL of Web services - Need for user registration Not available About This Database Database Descri...ption Download License Update History of This Database Site Policy | Contact Us Database Description - PSCDB | LSDB Archive ...

Doors for memory: A searchable database.

Science.gov (United States)

Baddeley, Alan D; Hitch, Graham J; Quinlan, Philip T; Bowes, Lindsey; Stone, Rob

2016-11-01

The study of human long-term memory has for over 50 years been dominated by research on words. This is partly due to lack of suitable nonverbal materials. Experience in developing a clinical test suggested that door scenes can provide an ecologically relevant and sensitive alternative to the faces and geometrical figures traditionally used to study visual memory. In pursuing this line of research, we have accumulated over 2000 door scenes providing a database that is categorized on a range of variables including building type, colour, age, condition, glazing, and a range of other physical characteristics. We describe an illustrative study of recognition memory for 100 doors tested by yes/no, two-alternative, or four-alternative forced-choice paradigms. These stimuli, together with the full categorized database, are available through a dedicated website. We suggest that door scenes provide an ecologically relevant and participant-friendly source of material for studying the comparatively neglected field of visual long-term memory.

Database Description - ASTRA | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name ASTRA Alternative n...tics Journal Search: Contact address Database classification Nucleotide Sequence Databases - Gene structure,...3702 Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description The database represents classified p...(10):1211-6. External Links: Original website information Database maintenance site National Institute of Ad... for user registration Not available About This Database Database Description Dow

Modern Hardware Technologies and Software Techniques for On-Line Database Storage and Access.

Science.gov (United States)

1985-12-01

of the information in a message narrative. This method employs artificial intelligence techniques to extract information, In simalest terms, an...disf ribif ion (tape replacemenf) systemns Database distribution On-fine mass storage Videogame ROM (luke-box I Media Cost Mt $2-10/438 $10-SO/G38...trajninq ot tne great intelligence for the analyst would be required. If, on’ the other hand, a sentence analysis scneme siTole enouq,. for the low-level

The Unified Database for BM@N experiment data handling

Science.gov (United States)

Gertsenberger, Konstantin; Rogachevsky, Oleg

2018-04-01

The article describes the developed Unified Database designed as a comprehensive relational data storage for the BM@N experiment at the Joint Institute for Nuclear Research in Dubna. The BM@N experiment, which is one of the main elements of the first stage of the NICA project, is a fixed target experiment at extracted Nuclotron beams of the Laboratory of High Energy Physics (LHEP JINR). The structure and purposes of the BM@N setup are briefly presented. The article considers the scheme of the Unified Database, its attributes and implemented features in detail. The use of the developed BM@N database provides correct multi-user access to actual information of the experiment for data processing. It stores information on the experiment runs, detectors and their geometries, different configuration, calibration and algorithm parameters used in offline data processing. An important part of any database - user interfaces are presented.

Operational experiences on the Borssele nuclear power plant using computer based surveillance and diagnostic system on-line

International Nuclear Information System (INIS)

Turkcan, E.; Quaadvliet, W.H.J.; Peeters, T.T.J.M.; Verhoef, J.P

1991-06-01

The on-line monitoring and diagnostics system of Borssele nuclear power plant (NPP), designed and established by the ECN Energy Research Foundation, has been operating continuously since 1983. The system is extended in form of multiprocessing, multi-tasking structure performing real-time monitoring, on-line reactor parameters' calculation, data-base preparation for expert systems and providing early information on possible malfunctions even in the incipient stage making alert by passive alarms. The system realized has already been operating in the course of 7 fuel cycles of the reactor starting from start-up through normal power operation. An expert system operating on the VAX work station is added to the surveillance and diagnostics system for data base management of the observed physical parameters relevant to the NPP under supervision. The paper highlights the surveillance and diagnostic modules involved, in their actual hierarchical form in use, presents theoretical considerations applied to the design of the surveillance system together with the results obtained through the 12th to 17th fuel cycles of the NPP including start-ups and shut-downs and reveals the experience thus gained by both utility and ECN through the application of the system described. (author). 19 refs.; 4 figs

Status of the solid breeder materials database

International Nuclear Information System (INIS)

Billone, M.C.; Dienst, W.; Lorenzetto, P.; Noda, K.; Roux, N.

1995-01-01

The databases for solid breeder ceramics (Li 2 O, Li 4 SiO 4 , Li 2 ZrO 3 , and LiAlO 2 ) and beryllium multiplier material were critically reviewed and evaluated as part of the ITER/CDA design effort (1988-1990). The results have been documented in a detailed technical report. Emphasis was placed on the physical, thermal, mechanical, chemical stability/compatibility, tritium retention/release, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Materials properties correlations were selected for use in design analysis, and ranges for input parameters (e.g., temperature, porosity, etc.) were established. Also, areas for future research and development in blanket materials technology were highlighted and prioritized. For Li 2 O, the most significant increase in the database has come in the area of tritium retention as a function of operating temperature and purge flow composition. The database for postirradiation inventory from purged in-reactor samples has increased from four points to 20 points. These new data have allowed an improvement in understanding and modeling, as well as better interpretation of the results of laboratory annealing studies on unirradiated and irradiated material. In the case of Li 2 ZrO 3 , relatively little data were available on the sensitivity of the mechanical properties of this ternary ceramic to microstructure and moisture content. The increase in the database for this material has allowed not only better characterization of its properties, but also optimization of fabrication parameters to improve its performance. Some additional data are also available for the other two ternary ceramics to aid in the characterization of their performance. In particular, the thermal performance of these materials, as well as beryllium, in packed-bed form has been measured and characterized

Resolution in in-line digital holography

International Nuclear Information System (INIS)

Fournier, C; Denis, L; Fournel, T

2010-01-01

Digital in-line holography is a 3D imaging technique which has been widely developed during the last two decades. This technique achieves the 3D reconstruction of volume objects from a 2D image-hologram. It is a metrological tool and therefore the improvement of resolution is one of the current challenges. However the resolution depends on several experimental parameters and the experimenters have to choose the parameters which will lead to the best resolution. This paper presents the study of resolution in in-line digital holography from the asymptotical bounds of the covariance of estimators used in hologram reconstruction.

Database Description - RPD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available ase Description General information of database Database name RPD Alternative name Rice Proteome Database...titute of Crop Science, National Agriculture and Food Research Organization Setsuko Komatsu E-mail: Database... classification Proteomics Resources Plant databases - Rice Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database... description Rice Proteome Database contains information on protei...and entered in the Rice Proteome Database. The database is searchable by keyword,

Database Description - PLACE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name PLACE Alternative name A Database...Kannondai, Tsukuba, Ibaraki 305-8602, Japan National Institute of Agrobiological Sciences E-mail : Databas...e classification Plant databases Organism Taxonomy Name: Tracheophyta Taxonomy ID: 58023 Database...99, Vol.27, No.1 :297-300 External Links: Original website information Database maintenance site National In...- Need for user registration Not available About This Database Database Descripti

Line positions, intensities and self-broadening coefficients for the ν5 band of methyl chloride

International Nuclear Information System (INIS)

Barbouchi Ramchani, A.; Jacquemart, D.; Dhib, M.; Aroui, H.

2013-01-01

High resolution Fourier transform spectra have been recorded around 6.9 μm at room temperature using a rapid scan Bruker IFS 120 HR interferometer (unapodized Bruker resolution=0.005 cm −1 ). Transitions of both 12 CH 3 35 Cl and 12 CH 3 37 Cl isotopologues belonging to the ν 5 perpendicular band have been studied. Line positions, intensities, and self-broadening coefficients have been retrieved using a multispectrum fitting procedure that allowed to fit simultaneously the whole set of experimental spectra recorded at various pressures of CH 3 Cl. The wavenumber calibration has been performed using the frequencies of CO 2 transitions. The transition dipole moments squared have been determined for each measured line and the whole set of measurements has been compared with previous measurements and with values from HITRAN and GEISA databases. The rotational J and K dependencies of the self-broadening coefficients have been clearly observed and modeled using empirical polynomial expansions. The average accuracy of the line parameters obtained in this work has been estimated to be between 0.1×10 −3 and 1×10 −3 cm −1 for line positions, between 2% and 5% for line intensities and between 5% and 10% for self-broadening coefficients depending on the transitions. -- Highlights: ► Fourier-transform spectra of the ν 5 band of CH 3 Cl at room temperature. ► Measurements of line positions, intensities and self-broadening coefficients. ► Analysis of the J- and K-rotational dependences of self-widths. ► Comparisons with literature