WorldWideScience

Sample records for line move antiparallel

  1. Moving contact lines on vibrating surfaces

    Solomenko, Zlatko; Spelt, Peter; Scott, Julian

    2017-11-01

    Large-scale simulations of flows with moving contact lines for realistic conditions generally requires a subgrid scale model (analyses based on matched asymptotics) to account for the unresolved part of the flow, given the large range of length scales involved near contact lines. Existing models for the interface shape in the contact-line region are primarily for steady flows on homogeneous substrates, with encouraging results in 3D simulations. Introduction of complexities would require further investigation of the contact-line region, however. Here we study flows with moving contact lines on planar substrates subject to vibrations, with applications in controlling wetting/dewetting. The challenge here is to determine the change in interface shape near contact lines due to vibrations. To develop further insight, 2D direct numerical simulations (wherein the flow is resolved down to an imposed slip length) have been performed to enable comparison with asymptotic theory, which is also developed further. Perspectives will also be presented on the final objective of the work, which is to develop a subgrid scale model that can be utilized in large-scale simulations. The authors gratefully acknowledge the ANR for financial support (ANR-15-CE08-0031) and the meso-centre FLMSN for use of computational resources. This work was Granted access to the HPC resources of CINES under the allocation A0012B06893 made by GENCI.

  2. On multiscale moving contact line theory.

    Li, Shaofan; Fan, Houfu

    2015-07-08

    In this paper, a multiscale moving contact line (MMCL) theory is presented and employed to simulate liquid droplet spreading and capillary motion. The proposed MMCL theory combines a coarse-grained adhesive contact model with a fluid interface membrane theory, so that it can couple molecular scale adhesive interaction and surface tension with hydrodynamics of microscale flow. By doing so, the intermolecular force, the van der Waals or double layer force, separates and levitates the liquid droplet from the supporting solid substrate, which avoids the shear stress singularity caused by the no-slip condition in conventional hydrodynamics theory of moving contact line. Thus, the MMCL allows the difference of the surface energies and surface stresses to drive droplet spreading naturally. To validate the proposed MMCL theory, we have employed it to simulate droplet spreading over various elastic substrates. The numerical simulation results obtained by using MMCL are in good agreement with the molecular dynamics results reported in the literature.

  3. Antiparallel Dynamic Covalent Chemistries.

    Matysiak, Bartosz M; Nowak, Piotr; Cvrtila, Ivica; Pappas, Charalampos G; Liu, Bin; Komáromy, Dávid; Otto, Sijbren

    2017-05-17

    The ability to design reaction networks with high, but addressable complexity is a necessary prerequisite to make advanced functional chemical systems. Dynamic combinatorial chemistry has proven to be a useful tool in achieving complexity, however with some limitations in controlling it. Herein we introduce the concept of antiparallel chemistries, in which the same functional group can be channeled into one of two reversible chemistries depending on a controllable parameter. Such systems allow both for achieving complexity, by combinatorial chemistry, and addressing it, by switching from one chemistry to another by controlling an external parameter. In our design the two antiparallel chemistries are thiol-disulfide exchange and thio-Michael addition, sharing the thiol as the common building block. By means of oxidation and reduction the system can be reversibly switched from predominantly thio-Michael chemistry to predominantly disulfide chemistry, as well as to any intermediate state. Both chemistries operate in water, at room temperature, and at mildly basic pH, which makes them a suitable platform for further development of systems chemistry.

  4. Moving droplets : The measurement of contact lines

    Poelma, C.; Franken, M.J.Z.; Kim, H.; Westerweel, J.

    2014-01-01

    Contact lines are the locations where a gas, liquid and a solid meet. From everyday experience we know that such contact lines can be mobile, for example in the case of a water droplet sliding over a glass surface. However, the continuum description of the flow towards or away from a contact line

  5. Anti-parallel triplexes

    Kosbar, Tamer R.; Sofan, Mamdouh A.; Waly, Mohamed A.

    2015-01-01

    about 6.1 °C when the TFO strand was modified with Z and the Watson-Crick strand with adenine-LNA (AL). The molecular modeling results showed that, in case of nucleobases Y and Z a hydrogen bond (1.69 and 1.72 Å, respectively) was formed between the protonated 3-aminopropyn-1-yl chain and one...... of the phosphate groups in Watson-Crick strand. Also, it was shown that the nucleobase Y made a good stacking and binding with the other nucleobases in the TFO and Watson-Crick duplex, respectively. In contrast, the nucleobase Z with LNA moiety was forced to twist out of plane of Watson-Crick base pair which......The phosphoramidites of DNA monomers of 7-(3-aminopropyn-1-yl)-8-aza-7-deazaadenine (Y) and 7-(3-aminopropyn-1-yl)-8-aza-7-deazaadenine LNA (Z) are synthesized, and the thermal stability at pH 7.2 and 8.2 of anti-parallel triplexes modified with these two monomers is determined. When, the anti...

  6. Response function of a moving contact line

    Perrin, H.; Belardinelli, D.; Sbragaglia, M.; Andreotti, B.

    2018-04-01

    The hydrodynamics of a liquid-vapor interface in contact with a heterogeneous surface is largely impacted by the presence of defects at the smaller scales. Such defects introduce morphological disturbances on the contact line and ultimately determine the force exerted on the wedge of liquid in contact with the surface. From the mathematical point of view, defects introduce perturbation modes, whose space-time evolution is governed by the interfacial hydrodynamic equations of the contact line. In this paper we derive the response function of the contact line to such generic perturbations. The contact line response may be used to design simplified one-dimensional time-dependent models accounting for the complexity of interfacial flows coupled to nanoscale defects, yet offering a more tractable mathematical framework to explore contact line motion through a disordered energy landscape.

  7. The microscopic investigation of structures of moving flux lines by ...

    Abstract. We have used a variety of microscopic techniques to reveal the structure and motion of flux line arrangements, when the flux lines in low Tc type II superconductors are caused to move by a transport current. Using small-angle neutron scattering by the flux line lattice (FLL), we are able to demonstrate directly the ...

  8. Multi-scale strategies for dealing with moving contact lines

    Smith, Edward R.; Theodorakis, Panagiotis; Craster, Richard V.; Matar, Omar K.

    2017-11-01

    Molecular dynamics (MD) has great potential to elucidate the dynamics of the moving contact line. As a more fundamental model, it can provide a priori results for fluid-liquid interfaces, surface tension, viscosity, phase change, and near wall stick-slip behaviour which typically show very good agreement to experimental results. However, modelling contact line motion combines all this complexity in a single problem. In this talk, MD simulations of the contact line are compared to the experimental results obtained from studying the dynamics of a sheared liquid bridge. The static contact angles are correctly matched to the experimental data for a range of different electro-wetting results. The moving contact line results are then compared for each of these electro-wetting values. Despite qualitative agreement, there are notable differences between the simulation and experiments. Many MD simulation have studied contact lines, and the sheared liquid bridge, so it is of interest to review the limitations of this setup in light of this discrepancy. A number of factors are discussed, including the inter-molecular interaction model, molecular-scale surface roughness, model of electro-wetting and, perhaps most importantly, the limited system sizes possible using MD simulation. EPSRC, UK, MEMPHIS program Grant (EP/K003976/1), RAEng Research Chair (OKM).

  9. Non-LTE hydrogen-line formation in moving prominences

    Heinzel, P.; Rompolt, B.

    1986-01-01

    The behavior of hydrogen-line brightness variations, depending on the prominence-velocity changes were investigated. By solving the NON-Local thermodynamic equilibrium (LTE) problem for hydrogen researchers determine quantitatively the effect of Doppler brightening and/or Doppler dimming (DBE, DDE) in the lines of Lyman and Balmer series. It is demonstrated that in low-density prominence plasmas, DBE in H alpha and H beta lines can reach a factor of three for velocities around 160 km/sec, while the L alpha line exhibits typical DDE. L beta brightness variations follow from a combined DBE in the H alpha and DDE in L alpha and L beta itself, providing that all relevant multilevel interlocking processes are taken into account.

  10. Analysis of on-line learning when a moving teacher goes around a true teacher

    Miyoshi, Seiji; Okada, Masato

    2005-01-01

    In the framework of on-line learning, a learning machine might move around a teacher due to the differences in structures or output functions between the teacher and the learning machine or due to noises. The generalization performance of a new student supervised by a moving machine has been analyzed. A model composed of a true teacher, a moving teacher and a student that are all linear perceptrons with noises has been treated analytically using statistical mechanics. It has been proven that ...

  11. Flow topology adjacent to a fast moving contact line

    Royon, A.; Ehrhard, P.

    2001-10-01

    Coating processes are commonly used in industry. In the present report the physical mechanisms involved in such wetting phenomena are investigated (a) by a numerical and (b) by an experimental approach in a plane section perpendicular to the contact line. The problem relates to a tape plunging vertically into a pool of two immiscible fluids. The equations and boundary conditions describing the problem are treated in non-dimensional form. Several simplifications are introduced to obtain a first approximative solution to the problem. The relevant parameters are the viscosity ratio V V , the density ratio D V and the Reynolds number of the heavy fluid, Re 1 . By a variation of the viscosity ratio or of the Reynolds number we demonstrate the existence of three typical flow structures: (1) stagnation point streamline in the light fluid, (2) stagnation point streamline in the heavy fluid or (3) transition flow with stagnation point streamlines in both fluids. The structure changes continuously from a complex flow in the light fluid to a complex flow in the heavy fluid by an increase of the viscosity ratio or by an increase of the Reynolds number in the heavy fluid. The mechanisms of the transitions, involving a thickening of the viscous boundary layer and inertial effects, are discussed in detail. The solution only weakly depends on the density ratio. In the experiment a PE-tape plunges into a pool of (a) silicone oil M1000 and air, (b) water and silicone oil M50 or (c) water and silicone oil M10. The experimental investigations confirm the existence of the two limit structures, namely a stagnation point streamline in air for the combination (a) or a stagnation point streamline in water for the combination (b). Even the transition from one flow structure to the other is observed with an increase of the Reynolds number for the combination (c). (orig.)

  12. Counting on the mental number line to make a move: Sensorimotor ('pen') control and numerical processing

    Sheridan, R.; Rooijen, M. van; Giles, O.; Mushtaq, F.; Steenbergen, B.; Mon-Williams, M.; Waterman, A.H.

    2017-01-01

    Mathematics is often conducted with a writing implement. But is there a relationship between numerical processing and sensorimotor 'pen' control? We asked participants to move a stylus so it crossed an unmarked line at a location specified by a symbolic number (1-9), where number colour indicated

  13. A finite-element model for moving contact line problems in immiscible two-phase flow

    Kucala, Alec

    2017-11-01

    Accurate modeling of moving contact line (MCL) problems is imperative in predicting capillary pressure vs. saturation curves, permeability, and preferential flow paths for a variety of applications, including geological carbon storage (GCS) and enhanced oil recovery (EOR). The macroscale movement of the contact line is dependent on the molecular interactions occurring at the three-phase interface, however most MCL problems require resolution at the meso- and macro-scale. A phenomenological model must be developed to account for the microscale interactions, as resolving both the macro- and micro-scale would render most problems computationally intractable. Here, a model for the moving contact line is presented as a weak forcing term in the Navier-Stokes equation and applied directly at the location of the three-phase interface point. The moving interface is tracked with the level set method and discretized using the conformal decomposition finite element method (CDFEM), allowing for the surface tension and the wetting model to be computed at the exact interface location. A variety of verification test cases for simple two- and three-dimensional geometries are presented to validate the current MCL model, which can exhibit grid independence when a proper scaling for the slip length is chosen. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525.

  14. Moving contact lines: linking molecular dynamics and continuum-scale modelling.

    Smith, Edward R; Theodorakis, Panagiotis E; Craster, Richard V; Matar, Omar K

    2018-05-04

    Despite decades of research, the modelling of moving contact lines has remained a formidable challenge in fluid dynamics whose resolution will impact numerous industrial, biological, and daily-life applications. On the one hand, molecular dynamics (MD) simulation has the ability to provide unique insight into the microscopic details that determine the dynamic behavior of the contact line, which is not possible with either continuum-scale simulations or experiments. On the other hand, continuum-based models provide the link to the macroscopic description of the system. In this Feature Article, we explore the complex range of physical factors, including the presence of surfactants, which govern the contact line motion through MD simulations. We also discuss links between continuum- and molecular-scale modelling, and highlight the opportunities for future developments in this area.

  15. Counting on the mental number line to make a move: sensorimotor ('pen') control and numerical processing.

    Sheridan, Rebecca; van Rooijen, Maaike; Giles, Oscar; Mushtaq, Faisal; Steenbergen, Bert; Mon-Williams, Mark; Waterman, Amanda

    2017-10-01

    Mathematics is often conducted with a writing implement. But is there a relationship between numerical processing and sensorimotor 'pen' control? We asked participants to move a stylus so it crossed an unmarked line at a location specified by a symbolic number (1-9), where number colour indicated whether the line ran left-right ('normal') or vice versa ('reversed'). The task could be simplified through the use of a 'mental number line' (MNL). Many modern societies use number lines in mathematical education and the brain's representation of number appears to follow a culturally determined spatial organisation (so better task performance is associated with this culturally normal orientation-the MNL effect). Participants (counter-balanced) completed two consistent blocks of trials, 'normal' and 'reversed', followed by a mixed block where line direction varied randomly. Experiment 1 established that the MNL effect was robust, and showed that the cognitive load associated with reversing the MNL not only affected response selection but also the actual movement execution (indexed by duration) within the mixed trials. Experiment 2 showed that an individual's motor abilities predicted performance in the difficult (mixed) condition but not the easier blocks. These results suggest that numerical processing is not isolated from motor capabilities-a finding with applied consequences.

  16. Modeling and simulations for molecular scale hydrodynamics of the moving contact line in immiscible two-phase flows

    Qian, Tiezheng; Wu, Congmin; Lei, Siu Long; Wang, Xiao Ping; Sheng, Ping

    2009-01-01

    This paper starts with an introduction to the Onsager principle of minimum energy dissipation which governs the optimal paths of deviation and restoration to equilibrium. Then there is a review of the variational approach to moving contact line

  17. Stick-Slip Motion of Moving Contact Line on Chemically Patterned Surfaces

    Wu, Congmin; Lei, Siulong; Qian, Tiezheng; Wang, Xiaoping

    2009-01-01

    Based on our continuum hydrodynamic model for immiscible two-phase flows at solid surfaces, the stick-slip motion has been predicted for moving contact line at chemically patterned surfaces [Wang et al., J. Fluid Mech., 605 (2008), pp. 59-78]. In this paper we show that the continuum predictions can be quantitatively verified by molecular dynamics (MD) simulations. Our MD simulations are carried out for two immiscible Lennard-Jones fluids confined by two planar solid walls in Poiseuille flow geometry. In particular, one solid surface is chemically patterned with alternating stripes. For comparison, the continuum model is numerically solved using material parameters directly measured in MD simulations. From oscillatory fluid-fluid interface to intermittent stick-slip motion of moving contact line, we have quantitative agreement between the continuum and MD results. This agreement is attributed to the accurate description down to molecular scale by the generalized Navier boundary condition in our continuum model. Numerical results are also presented for the relaxational dynamics of fluid-fluid interface, in agreement with a theoretical analysis based on the Onsager principle of minimum energy dissipation. © 2010 Global-Science Press.

  18. Vorticity dipoles and a theoretical model of a finite force at the moving contact line singularity

    Zhang, Peter; Devoria, Adam; Mohseni, Kamran

    2017-11-01

    In the well known works of Moffatt (1964) and Huh & Scriven (1971), an infinite force was reported at the moving contact line (MCL) and attributed to a non-integrable stress along the fluid-solid boundary. In our recent investigation of the boundary driven wedge, a model of the MCL, we find that the classical solution theoretically predicts a finite force at the contact line if the forces applied by the two boundaries that make up the corner are taken into consideration. Mathematically, this force can be obtained by the complex contour integral of the holomorphic vorticity-pressure function given by G = μω + ip . Alternatively, this force can also be found using a carefully defined real integral that incorporates the two boundaries. Motivated by this discovery, we have found that the rate of change in circulation, viscous energy dissipation, and viscous energy flux is also finite per unit contact line length. The analysis presented demonstrates that despite a singular stress and a relatively simple geometry, the no-slip semi-infinite wedge is capable of capturing some physical quantities of interest. Furthermore, this result provides a foundation for other challenging topics such as dynamic contact angle.

  19. Resonance-line transfer with partial redistribution. VIII. Solution in the comoving frame for moving atmospheres

    Mihalas, D.; Shine, R.A.; Kunasz, P.B.; Hummer, D.G.

    1976-01-01

    An analysis of the effects of partial frequency redistribution in the scattering process for lines formed in moving atmospheres has been performed using a flexible and general method which allows solutions of the transfer equation in the comoving frame of the gas. As a specific example, we consider the same chromospheric and atomic model, with the same velocity field, that was studied by Cannon and Vardavas. We find that the large changes in the profiles obtained by those authors, between the cases of complete and partial redistribution are spurious effects of angle averaging in the observer's frame instead of the comoving frame. Our results support fully the conclusion by Magnan that these changes are, in fact, unreal, at least for this particular model and redistribution function. Future work with other redistribution functions and with nonmonotone velocity fields will be possible using the techniques developed in this paper

  20. Statistical Mechanics of On-line Learning When a Moving Teacher Goes around an Unlearnable True Teacher

    Urakami, Masahiro; Miyoshi, Seiji; Okada, Masato

    2007-04-01

    In the framework of on-line learning, a learning machine might move around a teacher due to the differences in structures or output functions between the teacher and the learning machine. In this paper we analyze the generalization performance of a new student supervised by a moving machine. A model composed of a fixed true teacher, a moving teacher, and a student is treated theoretically using statistical mechanics, where the true teacher is a nonmonotonic perceptron and the others are simple perceptrons. Calculating the generalization errors numerically, we show that the generalization errors of a student can temporarily become smaller than that of a moving teacher and can reach the lowest value, even if the student only uses examples from the moving teacher. However, the generalization error of the student eventually becomes the same value with that of the moving teacher. This behavior is qualitatively different from that of a linear model.

  1. Numerical study on the stick-slip motion of contact line moving on heterogeneous surfaces

    Liu, Ming; Chen, Xiao-Peng

    2017-08-01

    We present a numerical study of a moving contact line (CL) crossing the intersecting region of hydrophilic and hydrophobic patterns on a solid wall using lattice Boltzmann methods (LBMs). To capture the interface between the two phases properly, we applied a phase field model coupled with the LBM. The evolutions of the CL velocity, dynamic contact angle, and apparent contact angle are analyzed for the so-called "stick" and "slip" processes. In the two processes, the evolution of the quantities follows different rules shortly after the initial quick transition, which is probably caused by finite interfacial thickness or non-equilibrium effects. For the stick process, the CL is almost fixed and energy is extracted from the main flow to rebuild the meniscus' profile. The evolution of the meniscus is mainly governed by mass conservation. The CL is depinned after the apparent contact angle surpasses the dynamic one, which implies that the interfacial segment in the vicinity of contact line is bended. For the slip process, the quantities evolve with features of relaxation. In the microscopic scale, the velocity of the CL depends on the balance between unbalanced Young's capillary force and viscous drag. To predict the apparent contact angle evolution, a model following the dynamics of an overdamped spring-mass system is proposed. Our results also show that the capillary flows in a channel with heterogeneous wall can be described generally with the Poiseuille flow superimposed by the above transient one.

  2. Moving contact lines in partial wetting: bridging the gap across the scales

    Pahlavan, Amir; Cueto-Felgueroso, Luis; McKinley, Gareth; Juanes, Ruben

    2017-11-01

    The spreading and dewetting of liquid films on solid substrates is a common phenomenon in nature and industry from a snail secreting a mucosal film to printing and coating processes. A quantitative description of these phenomena, however, requires a detailed understanding of the flow physics at the nanoscale as the intermolecular interactions become important close to the contact line. Classical hydrodynamic theory describes wetting as an interplay between viscous and interfacial forces, neglecting the intermolecular interactions, leading to a paradox known as the moving contact line singularity. By contrast, molecular kinetic theory describes wetting as an activated process, neglecting the bulk hydrodynamics in the spreading viscous fluid film altogether. Here, we show that our recently developed model for thin liquid films in partial wetting, which properly incorporates the role of van der Waals interactions in a thin spreading fluid layer into a height-dependent surface tension, bridges the gap between these two approaches and leads to a unified framework for the description of wetting phenomena. We further use our model to investigate the instability and dewetting of nanometric liquid films, and show that it brings theoretical predictions closer to experimental observations.

  3. A gradient stable scheme for a phase field model for the moving contact line problem

    Gao, Min

    2012-02-01

    In this paper, an efficient numerical scheme is designed for a phase field model for the moving contact line problem, which consists of a coupled system of the Cahn-Hilliard and Navier-Stokes equations with the generalized Navier boundary condition [1,2,4]. The nonlinear version of the scheme is semi-implicit in time and is based on a convex splitting of the Cahn-Hilliard free energy (including the boundary energy) together with a projection method for the Navier-Stokes equations. We show, under certain conditions, the scheme has the total energy decaying property and is unconditionally stable. The linearized scheme is easy to implement and introduces only mild CFL time constraint. Numerical tests are carried out to verify the accuracy and stability of the scheme. The behavior of the solution near the contact line is examined. It is verified that, when the interface intersects with the boundary, the consistent splitting scheme [21,22] for the Navier Stokes equations has the better accuracy for pressure. © 2011 Elsevier Inc.

  4. Bacterial actin MreB forms antiparallel double filaments.

    van den Ent, Fusinita; Izoré, Thierry; Bharat, Tanmay Am; Johnson, Christopher M; Löwe, Jan

    2014-05-02

    Filaments of all actin-like proteins known to date are assembled from pairs of protofilaments that are arranged in a parallel fashion, generating polarity. In this study, we show that the prokaryotic actin homologue MreB forms pairs of protofilaments that adopt an antiparallel arrangement in vitro and in vivo. We provide an atomic view of antiparallel protofilaments of Caulobacter MreB as apparent from crystal structures. We show that a protofilament doublet is essential for MreB's function in cell shape maintenance and demonstrate by in vivo site-specific cross-linking the antiparallel orientation of MreB protofilaments in E. coli. 3D cryo-EM shows that pairs of protofilaments of Caulobacter MreB tightly bind to membranes. Crystal structures of different nucleotide and polymerisation states of Caulobacter MreB reveal conserved conformational changes accompanying antiparallel filament formation. Finally, the antimicrobial agents A22/MP265 are shown to bind close to the bound nucleotide of MreB, presumably preventing nucleotide hydrolysis and destabilising double protofilaments.DOI: http://dx.doi.org/10.7554/eLife.02634.001. Copyright © 2014, van den Ent et al.

  5. Point-point and point-line moving-window correlation spectroscopy and its applications

    Zhou, Qun; Sun, Suqin; Zhan, Daqi; Yu, Zhiwu

    2008-07-01

    In this paper, we present a new extension of generalized two-dimensional (2D) correlation spectroscopy. Two new algorithms, namely point-point (P-P) correlation and point-line (P-L) correlation, have been introduced to do the moving-window 2D correlation (MW2D) analysis. The new method has been applied to a spectral model consisting of two different processes. The results indicate that P-P correlation spectroscopy can unveil the details and re-constitute the entire process, whilst the P-L can provide general feature of the concerned processes. Phase transition behavior of dimyristoylphosphotidylethanolamine (DMPE) has been studied using MW2D correlation spectroscopy. The newly proposed method verifies that the phase transition temperature is 56 °C, same as the result got from a differential scanning calorimeter. To illustrate the new method further, a lysine and lactose mixture has been studied under thermo perturbation. Using the P-P MW2D, the Maillard reaction of the mixture was clearly monitored, which has been very difficult using conventional display of FTIR spectra.

  6. Modeling and simulations for molecular scale hydrodynamics of the moving contact line in immiscible two-phase flows

    Qian, Tiezheng

    2009-10-29

    This paper starts with an introduction to the Onsager principle of minimum energy dissipation which governs the optimal paths of deviation and restoration to equilibrium. Then there is a review of the variational approach to moving contact line hydrodynamics. To demonstrate the validity of our continuum hydrodynamic model, numerical results from model calculations and molecular dynamics simulations are presented for immiscible Couette and Poiseuille flows past homogeneous solid surfaces, with remarkable overall agreement. Our continuum model is also used to study the contact line motion on surfaces patterned with stripes of different contact angles (i.e. surfaces of varying wettability). Continuum calculations predict the stick-slip motion for contact lines moving along these patterned surfaces, in quantitative agreement with molecular dynamics simulation results. This periodic motion is tunable through pattern period (geometry) and contrast in wetting property (chemistry). The consequence of stick-slip contact line motion on energy dissipation is discussed. © 2009 IOP Publishing Ltd.

  7. Conjunction of anti-parallel and component reconnection at the dayside MP: Cluster and Double Star coordinated observation on 6 April 2004

    Wang, J.; Pu, Z. Y.; Fu, S. Y.; Wang, X. G.; Xiao, C. J.; Dunlop, M. W.; Wei, Y.; Bogdanova, Y. V.; Zong, Q. G.; Xie, L.

    2011-05-01

    Previous theoretical and simulation studies have suggested that the anti-parallel and component reconnection can occur simultaneously on the dayside magnetopause. Certain observations have also been reported to support global conjunct pattern of magnetic reconnection. Here, we show direct evidence for the conjunction of anti-parallel and component MR using coordinated observations of Double Star TC-1 and Cluster under the same IMF condition on 6 April, 2004. The global MR X-line configuration constructed is in good agreement with the “S-shape” model.

  8. Anti-parallel dimer and tetramer formation of propylene carbonate

    Ayana Tagawa

    2017-09-01

    Full Text Available Raman scattering and infrared (IR absorption spectra of enantiopure (R-propylene carbonate ((RPC and racemic propylene carbonate (PC were recorded at room temperature, 25 °C, in benzene (Bz solution and in the pure liquid state to investigate the presence of dimers and other higher order intermolecular associations. (RPC and PC both demonstrated a strong C=O stretching vibrational band. The band exhibited changes in its shape and resonance wavenumber highly dependent on the concentrations of PCs, whereas a difference between the chirality of (RPC and PC had little influence. In an extremely dilute condition, doubly split bands were observed at 1807 and 1820 cm-1 in both Raman and IR spectra, which are assigned to the characteristic bands of isolated monomeric PCs. An additional band appeared at 1795 cm-1 in a dilute to concentrated regime, and its magnitude strengthened with increasing concentrations accompanied with slight increasing in the magnitude of 1807 cm-1 band in Raman spectra, while an increase in the magnitude of 1807 cm-1 band was clearly greater than that of 1795 cm-1 band in IR spectra. The spectrum changes at 1795 and 1807 cm-1 were attributed to characteristics of anti-parallel dimer formation of PCs caused by strong dipole-dipole interactions between C=O groups. Moreover, another additional signal was clearly observed at 1780-1790 cm-1 in a concentrated regime, and became the primary signal in the pure liquid state with slight increasing in the intensity of 1795 cm-1 band in Raman spectra. On the other hand, in IR spectra the observed increasing of 1780-1790 cm-1 band was much less than that of 1795 cm-1 band. These newly found spectrum changes in the concentrated regime are attributed to the formation of anti-parallel tetramers of PCs based on the characteristics of band selection rule found in Raman and IR spectra. Equilibrium constants for the anti-parallel dimer (KD and tetramer formation (KT of PCs in Bz solution and in

  9. Towards a more accurate microscopic description of the moving contact line problem - incorporating nonlocal effects through a statistical mechanics framework

    Nold, Andreas; Goddard, Ben; Sibley, David; Kalliadasis, Serafim

    2014-03-01

    Multiscale effects play a predominant role in wetting phenomena such as the moving contact line. An accurate description is of paramount interest for a wide range of industrial applications, yet it is a matter of ongoing research, due to the difficulty of incorporating different physical effects in one model. Important small-scale phenomena are corrections to the attractive fluid-fluid and wall-fluid forces in inhomogeneous density distributions, which often previously have been accounted for by the disjoining pressure in an ad-hoc manner. We systematically derive a novel model for the description of a single-component liquid-vapor multiphase system which inherently incorporates these nonlocal effects. This derivation, which is inspired by statistical mechanics in the framework of colloidal density functional theory, is critically discussed with respect to its assumptions and restrictions. The model is then employed numerically to study a moving contact line of a liquid fluid displacing its vapor phase. We show how nonlocal physical effects are inherently incorporated by the model and describe how classical macroscopic results for the contact line motion are retrieved. We acknowledge financial support from ERC Advanced Grant No. 247031 and Imperial College through a DTG International Studentship.

  10. Dispersion of traffic exhausts emitted from a stationary line source versus individual moving cars – a numerical comparison

    Günter Gross

    2016-09-01

    Full Text Available A three-dimensional microscale model was used to study the effects of moving vehicles on air pollution in the close vicinity of a road. The numerical results are compared to general findings from wind tunnel experiments and field observations. It was found that the model is suitable to capture the main flow characteristics within an urban street canyon, in particular the modifications relating to running traffic. A comparison of the results for a stationary line source approach and for multiple single moving sources demonstrates significant differences. For a street in a flat terrain, the near-road concentrations are underestimated by up to a factor of two if the emissions are approximated by a stationary line source. This underestimation decreases with increasing distance, and becomes negligible 30–50 m away from the road. For an urban canyon situation, the line source assumption is a conservative approximation for the concentrations at the leeside of the street, while on the opposite pavement and wall, a systematic underestimation was found. Also, the effects of different traffic situations have been studied and discussed.

  11. Moving along the Mental Number Line: Interactions between Whole-Body Motion and Numerical Cognition

    Hartmann, Matthias; Grabherr, Luzia; Mast, Fred W.

    2012-01-01

    Active head turns to the left and right have recently been shown to influence numerical cognition by shifting attention along the mental number line. In the present study, we found that passive whole-body motion influences numerical cognition. In a random-number generation task (Experiment 1), leftward and downward displacement of participants…

  12. Theoretical Analysis of Moving Reference Planes Associated with Unit Cells of Nonreciprocal Lossy Periodic Transmission-Line Structures

    S. Lamultree

    2017-04-01

    Full Text Available This paper presents a theoretical analysis of moving reference planes associated with unit cells of nonreciprocal lossy periodic transmission-line structures (NRLSPTLSs by the equivalent bi-characteristic-impedance transmission line (BCITL model. Applying the BCITL theory, only the equivalent BCITL parameters (characteristic impedances for waves propagating in forward and reverse directions and associated complex propagation constants are of interest. An infinite NRLSPTLS is considered first by shifting a reference position of unit cells along TLs of interest. Then, a semi-infinite terminated NRLSPTLS is investigated in terms of associated load reflection coefficients. It is found that the equivalent BCITL characteristic impedances of the original and shifted unit cells are mathematically related by the bilinear transformation. In addition, the associated load reflection coefficients of both unit cells are mathematically related by the bilinear transformation. However, the equivalent BCITL complex propagation constants remain unchanged. Numerical results are provided to show the validity of the proposed theoretical analysis.

  13. Second-line treatments: moving towards an opportunity to improve survival in advanced gastric cancer?

    Salati, Massimiliano; Di Emidio, Katia; Tarantino, Vittoria; Cascinu, Stefano

    2017-01-01

    Gastric cancer is the third leading cause of cancer-related death globally with approximately 723 000 deaths every year. Most patients present with advanced unresectable or metastatic disease, only amenable to palliative systemic treatment and a median survival uncommonly exceeding 12 months. Over the last years, the efficacy of chemotherapy combination has plateaued and the introduction of the anti-human epidermal growth factor receptor 2 trastuzumab has resulted in a limited survival gain in the upfront setting. After this positive experience, first-line treatment with new targeted therapies failed to improve the outcome of advanced gastric cancer. On the contrary, second-line options, including monochemotherapy with taxanes or irinotecan and the anti-vascular endothelial growth factor receptor 2 ramucirumab, either alone or combined with paclitaxel, opened new therapeutic rooms for an ever-increasing number of patients who maintain an acceptable performance status across multiple lines. This article provides an updated overview on the current management of advanced gastric cancer and discusses how the different treatment options available may be best combined to favourably impact the outcome of patients following the logic of a treatment strategy.

  14. Effects of a moving X-line in a time-dependent reconnection model

    S. A. Kiehas

    2007-02-01

    Full Text Available In the frame of magnetized plasmas, reconnection appears as an essential process for the description of plasma acceleration and changing magnetic field topology. Under the variety of reconnection regions in our solar system, we focus our research onto the Earth's magnetotail. Under certain conditions a Near Earth Neutral Line (NENL is free to evolve in the current sheet of the magnetotail. Reconnection in this region leads to the formation of Earth- and tailward propagating plasma bulges, which can be detected by the Cluster or Geotail spacecraft. Observations give rise to the assumption that the evolved reconnection line does not provide a steady state behavior, but is propagating towards the tail (e.g., Baker et al., 2002. Based on a time-dependent variant of the Petschek model of magnetic reconnection, we present a method that includes an X-line motion and discuss the effects of such a motion. We focus our main interest on the shock structure and the magnetic field behavior, both for the switch-on and the switch-off phase.

  15. Factorization of differential expansion for antiparallel double-braid knots

    Morozov, A.

    2016-09-01

    Continuing the quest for exclusive Racah matrices, which are needed for evaluation of colored arborescent-knot polynomials in Chern-Simons theory, we suggest to extract them from a new kind of a double-evolution — that of the antiparallel double-braids, which is a simple two-parametric family of two-bridge knots, generalizing the one-parametric family of twist knots. In the case of rectangular representations R = [ r s ] we found an evidence that the corresponding differential expansion miraculously factorizes and can be obtained from that for the twist knots. This reduces the problem of rectangular exclusive Racah to constructing the answers for just a few twist knots. We develop a recent conjecture on the structure of differential expansion for the simplest members of this family (the trefoil and the figure-eight knot) and provide the exhaustive answer for the first unknown case of R = [33]. The answer includes HOMFLY of arbitrary twist and double-braid knots and Racah matrices overline{S} and S — what allows to calculate [33]-colored polynomials for arbitrary arborescent (double-fat) knots. For generic rectangular representations fully described are only the contributions of the single-floor pyramids. One step still remains to be done.

  16. 3D adaptive finite element method for a phase field model for the moving contact line problems

    Shi, Yi

    2013-08-01

    In this paper, we propose an adaptive finite element method for simulating the moving contact line problems in three dimensions. The model that we used is the coupled Cahn-Hilliard Navier-Stokes equations with the generalized Navier boundary condition(GNBC) proposed in [18]. In our algorithm, to improve the efficiency of the simulation, we use the residual type adaptive finite element algorithm. It is well known that the phase variable decays much faster away from the interface than the velocity variables. There- fore we use an adaptive strategy that will take into account of such difference. Numerical experiments show that our algorithm is both efficient and reliable. © 2013 American Institute of Mathematical Sciences.

  17. Real time radial and tangential tomosynthesis system dedicated to on line x-ray examination of moving objects

    Antonakios, M.; Rizo, Ph.; Lamarque, P.

    2000-01-01

    This presentation describes a system able to compute and display in real time a reconstructed image of a moving object using tomosynthesis methods. The object being moved on a known trajectory between the x-ray source and a detector, the tomosynthesis is focused on a given surface of the object and allows to reconstruct a sharp image of the structure on the surface superimposed to a blurred image of the surrounding plane. The developed tomosynthesis algorithm is based on a set of look up tables which provide for each position of the object on the trajectory, the projection of a given point of the imaged surface of the object on the detector. Several hundreds of frames can be combined to compute the tomosynthesis image. The signal-to-noise ratio obtained on processed images is equivalent to the one obtained by averaging images with a static object. In order to speed up the tomosynthesis reconstruction and to reach the video frame rate, we integrated a DSP based hardware in a PC host. The geometric calibration parameters and the look up tables are pre-computed on the PC. The on-line tomosynthesis calculation is carried out by the multi DSP architecture which manages in real time, frame acquisition, parallel tomosynthesis calculation and output image display. On this particular implementation of tomosynthesis, up to hundred video frames can be combined. We illustrate the potential of this system on an application of the tomosynthesis to solid rocket motor examination

  18. A new bipolar RRAM selector based on anti-parallel connected diodes for crossbar applications

    Li, Yingtao; Gong, Qingchun; Li, Rongrong; Jiang, Xinyu

    2014-01-01

    Crossbar arrays are the most promising application of a resistive random access memory (RRAM) device for achieving high density memory. However, cross-talk interference in the crossbar array limits the increase in the integration density. In this paper, the combination of two anti-parallel connected diodes and a bipolar RRAM cell is proposed to suppress the sneak current in a crossbar array with anti-parallel connected diodes as the selector for the bipolar RRAM. By using the anti-parallel connected diodes as a selector, the sneak current can be effectively suppressed and the high density crossbar array of more than 1 Mb can be realized as estimated by the 1/2V read voltage scheme. These results indicate that anti-parallel connected diodes can be used as a bipolar selector and have great potential for high density bipolar RRAM crossbar array applications. (papers)

  19. A possibility of parallel and anti-parallel diffraction measurements on ...

    resolution property of the other one, anti-parallel position, is very poor. .... in a wide angular region using BPC mochromator at the MF condition by showing ... and N Nimura, Proceedings of the 7th World Conference on Neutron Radiography,.

  20. Moving the implementation line

    Carugati, Andrea; Giangreco, A.; Sebastiano, A.

    2011-01-01

    of a typical Western nursing home that, in the past 12 years, has aimed to internally develop a healthcare provision and management system to support its evolving needs. Our analysis shows that four factors enable this concurrent change: (1) the internal appreciation of change, (2) the external appreciation...

  1. Anti-parallel polarization switching in a triglycine sulfate organic ferroelectric insulator: The role of surface charges

    Ma, He; Wu, Zhuangchun; Peng, Dongwen; Wang, Yaojin; Wang, Yiping; Yang, Ying; Yuan, Guoliang

    2018-04-01

    Four consecutive ferroelectric polarization switchings and an abnormal ring-like domain pattern can be introduced by a single tip bias of a piezoresponse force microscope in the (010) triglycine sulfate (TGS) crystal. The external electric field anti-parallel to the original polarization induces the first polarization switching; however, the surface charges of TGS can move toward the tip location and induce the second polarization switching once the tip bias is removed. The two switchings allow a ring-like pattern composed of the central domain with downward polarization and the outer domain with upward polarization. Once the two domains disappear gradually as a result of depolarization, the other two polarization switchings occur one by one at the TGS where the tip contacts. However, the backswitching phenomenon does not occur when the external electric field is parallel to the original polarization. These results can be explained according to the surface charges instead of the charges injected inside.

  2. An efficient scheme for a phase field model for the moving contact line problem with variable density and viscosity

    Gao, Min

    2014-09-01

    In this paper, we develop an efficient numerical method for the two phase moving contact line problem with variable density, viscosity, and slip length. The physical model is based on a phase field approach, which consists of a coupled system of the Cahn-Hilliard and Navier-Stokes equations with the generalized Navier boundary condition [1,2,5]. To overcome the difficulties due to large density and viscosity ratio, the Navier-Stokes equations are solved by a splitting method based on a pressure Poisson equation [11], while the Cahn-Hilliard equation is solved by a convex splitting method. We show that the method is stable under certain conditions. The linearized schemes are easy to implement and introduce only mild CFL time constraint. Numerical tests are carried out to verify the accuracy, stability and efficiency of the schemes. The method allows us to simulate the interface problems with extremely small interface thickness. Three dimensional simulations are included to validate the efficiency of the method. © 2014 Elsevier Inc.

  3. An efficient scheme for a phase field model for the moving contact line problem with variable density and viscosity

    Gao, Min; Wang, Xiao-Ping

    2014-01-01

    In this paper, we develop an efficient numerical method for the two phase moving contact line problem with variable density, viscosity, and slip length. The physical model is based on a phase field approach, which consists of a coupled system of the Cahn-Hilliard and Navier-Stokes equations with the generalized Navier boundary condition [1,2,5]. To overcome the difficulties due to large density and viscosity ratio, the Navier-Stokes equations are solved by a splitting method based on a pressure Poisson equation [11], while the Cahn-Hilliard equation is solved by a convex splitting method. We show that the method is stable under certain conditions. The linearized schemes are easy to implement and introduce only mild CFL time constraint. Numerical tests are carried out to verify the accuracy, stability and efficiency of the schemes. The method allows us to simulate the interface problems with extremely small interface thickness. Three dimensional simulations are included to validate the efficiency of the method. © 2014 Elsevier Inc.

  4. A Bipolar Spindle of Antiparallel ParM Filaments Drives Bacterial Plasmid Segregation

    Gayathri, P; Fujii, T; Møller-Jensen, Jakob

    2012-01-01

    the spindle between ParRC complexes on sister plasmids. Using a combination of structural work and total internal reflection fluorescence microscopy, we show that ParRC bound and could accelerate growth at only one end of polar ParM filaments, mechanistically resembling eukaryotic formins. The architecture...... of ParM filaments enabled two ParRC-bound filaments to associate in an antiparallel orientation, forming a bipolar spindle. The spindle elongated as a bundle of at least two antiparallel filaments, thereby pushing two plasmid clusters toward the poles....

  5. A finite element method for the numerical solution of the coupled Cahn-Hilliard and Navier-Stokes system for moving contact line problems

    Bao, Kai

    2012-10-01

    In this paper, a semi-implicit finite element method is presented for the coupled Cahn-Hilliard and Navier-Stokes equations with the generalized Navier boundary condition for the moving contact line problems. In our method, the system is solved in a decoupled way. For the Cahn-Hilliard equations, a convex splitting scheme is used along with a P1-P1 finite element discretization. The scheme is unconditionally stable. A linearized semi-implicit P2-P0 mixed finite element method is employed to solve the Navier-Stokes equations. With our method, the generalized Navier boundary condition is extended to handle the moving contact line problems with complex boundary in a very natural way. The efficiency and capacity of the present method are well demonstrated with several numerical examples. © 2012 Elsevier Inc..

  6. A finite element method for the numerical solution of the coupled Cahn-Hilliard and Navier-Stokes system for moving contact line problems

    Bao, Kai; Shi, Yi; Sun, Shuyu; Wang, Xiaoping

    2012-01-01

    In this paper, a semi-implicit finite element method is presented for the coupled Cahn-Hilliard and Navier-Stokes equations with the generalized Navier boundary condition for the moving contact line problems. In our method, the system is solved in a decoupled way. For the Cahn-Hilliard equations, a convex splitting scheme is used along with a P1-P1 finite element discretization. The scheme is unconditionally stable. A linearized semi-implicit P2-P0 mixed finite element method is employed to solve the Navier-Stokes equations. With our method, the generalized Navier boundary condition is extended to handle the moving contact line problems with complex boundary in a very natural way. The efficiency and capacity of the present method are well demonstrated with several numerical examples. © 2012 Elsevier Inc..

  7. Underwater tracking of a moving dipole source using an artificial lateral line: algorithm and experimental validation with ionic polymer–metal composite flow sensors

    Abdulsadda, Ahmad T; Tan, Xiaobo

    2013-01-01

    Motivated by the lateral line system of fish, arrays of flow sensors have been proposed as a new sensing modality for underwater robots. Existing studies on such artificial lateral lines (ALLs) have been mostly focused on the localization of a fixed underwater vibrating sphere (dipole source). In this paper we examine the problem of tracking a moving dipole source using an ALL system. Based on an analytical model for the moving dipole-generated flow field, we formulate a nonlinear estimation problem that aims to minimize the error between the measured and model-predicted magnitudes of flow velocities at the sensor sites, which is subsequently solved with the Gauss–Newton scheme. A sliding discrete Fourier transform (SDFT) algorithm is proposed to efficiently compute the evolving signal magnitudes based on the flow velocity measurements. Simulation indicates that it is adequate and more computationally efficient to use only the signal magnitudes corresponding to the dipole vibration frequency. Finally, experiments conducted with an artificial lateral line consisting of six ionic polymer–metal composite (IPMC) flow sensors demonstrate that the proposed scheme is able to simultaneously locate the moving dipole and estimate its vibration amplitude and traveling speed with small errors. (paper)

  8. A possibility of parallel and anti-parallel diffraction measurements on ...

    However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the / measured ...

  9. Coalescence of two polarized photons with antiparallel momenta into one on an electron

    Galynskii, M.V.

    1989-01-01

    The matrix elements have been calculated for the coalescence of two photons with antiparallel momenta and equal frequencies into one on an electron. An explicit expression for the differential probability for the process, with allowance for the polarization of all the particles, has been obtained in the nonrelativistic approximation

  10. A fully discrete energy stable scheme for a phase filed moving contact line model with variable densities and viscosities

    Zhu, Guangpu; Chen, Huangxin; Sun, Shuyu; Yao, Jun

    2018-01-01

    In this paper, a fully discrete scheme which considers temporal and spatial discretizations is presented for the coupled Cahn-Hilliard equation in conserved form with the dynamic contact line condition and the Navier-Stokes equation

  11. The half-wave rectifier response of the magnetosphere and antiparallel merging

    Crooker, N. U.

    1980-01-01

    In some ways the magnetosphere behaves as if merging occurs only when the interplanetary magnetic field (IMF) is southward, and in other ways it behaves as if merging occurs for all IMF orientations. An explanation of this duality is offered in terms of a geometrical antiparallel merging model which predicts merging for all IMF orientations but magnetic flux transfer to the tail only for southward IMF. This is in contrast to previous models of component merging, where merging and flux transfer occur together for nearly all IMF orientations. That the problematic duality can be explained by the model is compelling evidence that antiparallel merging should be seriously considered in constructing theories of the merging process.

  12. Nitrobenzene anti-parallel dimer formation in non-polar solvents

    Toshiyuki Shikata

    2014-06-01

    Full Text Available We investigated the dielectric and depolarized Rayleigh scattering behaviors of nitrobenzene (NO2-Bz, which is a benzene mono-substituted with a planar molecular frame bearing the large electric dipole moment 4.0 D, in non-polar solvents solutions, such as tetrachloromethane and benzene, at up to 3 THz for the dielectric measurements and 8 THz for the scattering experiments at 20 °C. The dielectric relaxation strength of the system was substantially smaller than the proportionality to the concentration in a concentrated regime and showed a Kirkwood correlation factor markedly lower than unity; gK ∼ 0.65. This observation revealed that NO2-Bz has a tendency to form dimers, (NO2-Bz2, in anti-parallel configurations for the dipole moment with increasing concentration of the two solvents. Both the dielectric and scattering data exhibited fast and slow Debye-type relaxation modes with the characteristic time constants ∼7 and ∼50 ps in a concentrated regime (∼15 and ∼30 ps in a dilute regime, respectively. The fast mode was simply attributed to the rotational motion of the (monomeric NO2-Bz. However, the magnitude of the slow mode was proportional to the square of the concentration in the dilute regime; thus, the mode was assigned to the anti-parallel dimer, (NO2-Bz2, dissociation process, and the slow relaxation time was attributed to the anti-parallel dimer lifetime. The concentration dependencies of both the dielectric and scattering data show that the NO2-Bz molecular processes are controlled through a chemical equilibrium between monomers and anti-parallel dimers, 2NO2-Bz ↔ (NO2-Bz2, due to a strong dipole-dipole interaction between nitro groups.

  13. Illusory bending of a rigidly moving line segment: effects of image motion and smooth pursuit eye movements.

    Thaler, Lore; Todd, James T; Spering, Miriam; Gegenfurtner, Karl R

    2007-04-20

    Four experiments in which observers judged the apparent "rubberiness" of a line segment undergoing different types of rigid motion are reported. The results reveal that observers perceive illusory bending when the motion involves certain combinations of translational and rotational components and that the illusion is maximized when these components are presented at a frequency of approximately 3 Hz with a relative phase angle of approximately 120 degrees . Smooth pursuit eye movements can amplify or attenuate the illusion, which is consistent with other results reported in the literature that show effects of eye movements on perceived image motion. The illusion is unaffected by background motion that is in counterphase with the motion of the line segment but is significantly attenuated by background motion that is in-phase. This is consistent with the idea that human observers integrate motion signals within a local frame of reference, and it provides strong evidence that visual persistency cannot be the sole cause of the illusion as was suggested by J. R. Pomerantz (1983). An analysis of the motion patterns suggests that the illusory bending motion may be due to an inability of observers to accurately track the motions of features whose image displacements undergo rapid simultaneous changes in both space and time. A measure of these changes is presented, which is highly correlated with observers' numerical ratings of rubberiness.

  14. A fully discrete energy stable scheme for a phase filed moving contact line model with variable densities and viscosities

    Zhu, Guangpu

    2018-01-26

    In this paper, a fully discrete scheme which considers temporal and spatial discretizations is presented for the coupled Cahn-Hilliard equation in conserved form with the dynamic contact line condition and the Navier-Stokes equation with the generalized Navier boundary condition. Variable densities and viscosities are incorporated in this model. A rigorous proof of energy stability is provided for the fully discrete scheme based on a semi-implicit temporal discretization and a finite difference method on the staggered grids for the spatial discretization. A splitting method based on the pressure stabilization is implemented to solve the Navier-Stokes equation, while the stabilization approach is also used for the Cahn-Hilliard equation. Numerical results in both 2-D and 3-D demonstrate the accuracy, efficiency and decaying property of discrete energy of the proposed scheme.

  15. On a free-surface problem with moving contact line: From variational principles to stable numerical approximations

    Fumagalli, Ivan; Parolini, Nicola; Verani, Marco

    2018-02-01

    We analyze a free-surface problem described by time-dependent Navier-Stokes equations. Surface tension, capillary effects and wall friction are taken into account in the evolution of the system, influencing the motion of the contact line - where the free surface hits the wall - and of the dynamics of the contact angle. The differential equations governing the phenomenon are first derived from the variational principle of minimum reduced dissipation, and then discretized by means of the ALE approach. The numerical properties of the resulting scheme are investigated, drawing a parallel with the physical properties holding at the continuous level. Some instability issues are addressed in detail, in the case of an explicit treatment of the geometry, and novel additional terms are introduced in the discrete formulation in order to damp the instabilities. Numerical tests assess the suitability of the approach, the influence of the parameters, and the effectiveness of the new stabilizing terms.

  16. Structure and Sequence Analyses of Clustered Protocadherins Reveal Antiparallel Interactions that Mediate Homophilic Specificity.

    Nicoludis, John M; Lau, Sze-Yi; Schärfe, Charlotta P I; Marks, Debora S; Weihofen, Wilhelm A; Gaudet, Rachelle

    2015-11-03

    Clustered protocadherin (Pcdh) proteins mediate dendritic self-avoidance in neurons via specific homophilic interactions in their extracellular cadherin (EC) domains. We determined crystal structures of EC1-EC3, containing the homophilic specificity-determining region, of two mouse clustered Pcdh isoforms (PcdhγA1 and PcdhγC3) to investigate the nature of the homophilic interaction. Within the crystal lattices, we observe antiparallel interfaces consistent with a role in trans cell-cell contact. Antiparallel dimerization is supported by evolutionary correlations. Two interfaces, located primarily on EC2-EC3, involve distinctive clustered Pcdh structure and sequence motifs, lack predicted glycosylation sites, and contain residues highly conserved in orthologs but not paralogs, pointing toward their biological significance as homophilic interaction interfaces. These two interfaces are similar yet distinct, reflecting a possible difference in interaction architecture between clustered Pcdh subfamilies. These structures initiate a molecular understanding of clustered Pcdh assemblies that are required to produce functional neuronal networks. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Hydration of non-polar anti-parallel β-sheets

    Urbic, Tomaz; Dias, Cristiano L.

    2014-01-01

    In this work we focus on anti-parallel β-sheets to study hydration of side chains and polar groups of the backbone using all-atom molecular dynamics simulations. We show that: (i) water distribution around the backbone does not depend significantly on amino acid sequence, (ii) more water molecules are found around oxygen than nitrogen atoms of the backbone, and (iii) water molecules around nitrogen are highly localized in the planed formed by peptide backbones. To study hydration around side chains we note that anti-parallel β-sheets exhibit two types of cross-strand pairing: Hydrogen-Bond (HB) and Non-Hydrogen-Bond (NHB) pairing. We show that distributions of water around alanine, leucine, and valine side chains are very different at HB compared to NHB faces. For alanine pairs, the space between side chains has a higher concentration of water if residues are located in the NHB face of the β-sheet as opposed to the HB face. For leucine residues, the HB face is found to be dry while the space between side chains at the NHB face alternates between being occupied and non-occupied by water. Surprisingly, for valine residues the NHB face is dry, whereas the HB face is occupied by water. We postulate that these differences in water distribution are related to context dependent propensities observed for β-sheets

  18. LINES

    Minas Bakalchev

    2015-10-01

    Full Text Available The perception of elements in a system often creates their interdependence, interconditionality, and suppression. The lines from a basic geometrical element have become the model of a reductive world based on isolation according to certain criteria such as function, structure, and social organization. Their traces are experienced in the contemporary world as fragments or ruins of a system of domination of an assumed hierarchical unity. How can one release oneself from such dependence or determinism? How can the lines become less “systematic” and forms more autonomous, and less reductive? How is a form released from modernistic determinism on the new controversial ground? How can these elements or forms of representation become forms of action in the present complex world? In this paper, the meaning of lines through the ideas of Le Corbusier, Leonidov, Picasso, and Hitchcock is presented. Spatial research was made through a series of examples arising from the projects of the architectural studio “Residential Transformations”, which was a backbone for mapping the possibilities ranging from playfulness to exactness, as tactics of transformation in the different contexts of the contemporary world.

  19. The ionospheric footprint of antiparallel merging regions on the dayside magnetopause

    I. J. Coleman

    2000-05-01

    Full Text Available The antiparallel merging hypothesis states that reconnection takes place on the dayside magnetopause where the solar and geomagnetic fields are oppositely directed. With this criterion, we have mapped the predicted merging regions to the ionosphere using the Tsyganenko 96 magnetic field model, distinguishing between regions of sub-Alfvénic and super-Alfvénic magnetosheath flow, and identifying the day-night terminator. We present the resulting shape, width and latitude of the ionospheric dayside merging regions in both hemispheres, showing their dependence on the Earth's dipole tilt. The resulting seasonal variation of the longitudinal width is consistent with the conjugate electric fields in the northern and southern cusps, as measured by the SuperDARN HF radars, for example. We also find a seasonal shift in latitude similar to that observed in satellite cusp data.Key words: Ionosphere (ionosphere-magnetosphere interactions · Magnetospheric physics (magnetopause · cusp and boundary layers; magnetosphere-ionosphere interactions

  20. Antiparallel Self-Association of a γ,α-Hybrid Peptide: More Relevance of Weak Interactions.

    Venugopalan, Paloth; Kishore, Raghuvansh

    2015-08-01

    To learn how a preorganized peptide-based molecular template, together with diverse weak non-covalent interactions, leads to an effective self-association, we investigated the conformational characteristics of a simple γ,α-hybrid model peptide, Boc-γ-Abz-Gly-OMe. The single-crystal X-ray diffraction analysis revealed the existence of a fully extended β-strand-like structure stabilized by two non-conventional C-H⋅⋅⋅O=C intramolecular H-bonds. The 2D (1) H NMR ROESY experiment led us to propose that the flat topology of the urethane-γ-Abz-amide moiety is predominantly preserved in a non-polar environment. The self-association of the energetically more favorable antiparallel β-strand-mimic in solid-state engenders an unusual 'flight of stairs' fabricated through face-to-face and edge-to-edge Ar⋅⋅⋅Ar interactions. In conjunction with FT-IR spectroscopic analysis in chloroform, we highlight that conformationally semi-rigid γ-Abz foldamer in appositely designed peptides may encourage unusual β-strand or β-sheet-like self-association and supramolecular organization stabilized via weak attractive forces. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Toxic prefibrillar α-synuclein amyloid oligomers adopt a distinctive antiparallel β-sheet structure.

    Celej, María Soledad; Sarroukh, Rabia; Goormaghtigh, Erik; Fidelio, Gerardo D; Ruysschaert, Jean-Marie; Raussens, Vincent

    2012-05-01

    Parkinson's disease is an age-related movement disorder characterized by the presence in the mid-brain of amyloid deposits of the 140-amino-acid protein AS (α-synuclein). AS fibrillation follows a nucleation polymerization pathway involving diverse transient prefibrillar species varying in size and morphology. Similar to other neurodegenerative diseases, cytotoxicity is currently attributed to these prefibrillar species rather than to the insoluble aggregates. Nevertheless, the underlying molecular mechanisms responsible for cytotoxicity remain elusive and structural studies may contribute to the understanding of both the amyloid aggregation mechanism and oligomer-induced toxicity. It is already recognized that soluble oligomeric AS species adopt β-sheet structures that differ from those characterizing the fibrillar structure. In the present study we used ATR (attenuated total reflection)-FTIR (Fourier-transform infrared) spectroscopy, a technique especially sensitive to β-sheet structure, to get a deeper insight into the β-sheet organization within oligomers and fibrils. Careful spectral analysis revealed that AS oligomers adopt an antiparallel β-sheet structure, whereas fibrils adopt a parallel arrangement. The results are discussed in terms of regions of the protein involved in the early β-sheet interactions and the implications of such conformational arrangement for the pathogenicity associated with AS oligomers.

  2. New tetrameric forms of the rotavirus NSP4 with antiparallel helices.

    Kumar, Sushant; Ramappa, Raghavendra; Pamidimukkala, Kiranmayee; Rao, C D; Suguna, K

    2018-06-01

    Rotavirus nonstructural protein 4, the first viral enterotoxin to be identified, is a multidomain, multifunctional glycoprotein. Earlier, we reported a Ca 2+ -bound coiled-coil tetrameric structure of the diarrhea-inducing region of NSP4 from the rotavirus strains SA11 and I321 and a Ca 2+ -free pentameric structure from the rotavirus strain ST3, all with a parallel arrangement of α-helices. pH was found to determine the oligomeric state: a basic pH favoured a tetramer, whereas an acidic pH favoured a pentamer. Here, we report two novel forms of the coiled-coil region of NSP4 from the bovine rotavirus strains MF66 and NCDV. These crystallized at acidic pH, forming antiparallel coiled-coil tetrameric structures without any bound Ca 2+ ion. Structural and mutational studies of the coiled-coil regions of NSP4 revealed that the nature of the residue at position 131 (Tyr/His) plays an important role in the observed structural diversity.

  3. IMF control of cusp proton emission intensity and dayside convection: implications for component and anti-parallel reconnection

    M. Lockwood

    2003-04-01

    Full Text Available We study a brightening of the Lyman-a emission in the cusp which occurred in response to a short-lived south-ward turning of the interplanetary magnetic field (IMF during a period of strongly enhanced solar wind plasma concentration. The cusp proton emission is detected using the SI-12 channel of the FUV imager on the IMAGE spacecraft. Analysis of the IMF observations recorded by the ACE and Wind spacecraft reveals that the assumption of a constant propagation lag from the upstream spacecraft to the Earth is not adequate for these high time-resolution studies. The variations of the southward IMF component observed by ACE and Wind allow for the calculation of the ACE-to-Earth lag as a function of time. Application of the derived propagation delays reveals that the intensity of the cusp emission varied systematically with the IMF clock angle, the relationship being particularly striking when the intensity is normalised to allow for the variation in the upstream solar wind proton concentration. The latitude of the cusp migrated equatorward while the lagged IMF pointed southward, confirming the lag calculation and indicating ongoing magnetopause reconnection. Dayside convection, as monitored by the SuperDARN network of radars, responded rapidly to the IMF changes but lagged behind the cusp proton emission response: this is shown to be as predicted by the model of flow excitation by Cowley and Lockwood (1992. We use the numerical cusp ion precipitation model of Lockwood and Davis (1996, along with modelled Lyman-a emission efficiency and the SI-12 instrument response, to investigate the effect of the sheath field clock angle on the acceleration of ions on crossing the dayside magnetopause. This modelling reveals that the emission commences on each reconnected field line 2–2.5 min after it is opened and peaks 3–5 min after it is opened. We discuss how comparison of the Lyman-a intensities with oxygen emissions observed simultaneously by the SI-13

  4. IMF control of cusp proton emission intensity and dayside convection: implications for component and anti-parallel reconnection

    M. Lockwood

    Full Text Available We study a brightening of the Lyman-a emission in the cusp which occurred in response to a short-lived south-ward turning of the interplanetary magnetic field (IMF during a period of strongly enhanced solar wind plasma concentration. The cusp proton emission is detected using the SI-12 channel of the FUV imager on the IMAGE spacecraft. Analysis of the IMF observations recorded by the ACE and Wind spacecraft reveals that the assumption of a constant propagation lag from the upstream spacecraft to the Earth is not adequate for these high time-resolution studies. The variations of the southward IMF component observed by ACE and Wind allow for the calculation of the ACE-to-Earth lag as a function of time. Application of the derived propagation delays reveals that the intensity of the cusp emission varied systematically with the IMF clock angle, the relationship being particularly striking when the intensity is normalised to allow for the variation in the upstream solar wind proton concentration. The latitude of the cusp migrated equatorward while the lagged IMF pointed southward, confirming the lag calculation and indicating ongoing magnetopause reconnection. Dayside convection, as monitored by the SuperDARN network of radars, responded rapidly to the IMF changes but lagged behind the cusp proton emission response: this is shown to be as predicted by the model of flow excitation by Cowley and Lockwood (1992. We use the numerical cusp ion precipitation model of Lockwood and Davis (1996, along with modelled Lyman-a emission efficiency and the SI-12 instrument response, to investigate the effect of the sheath field clock angle on the acceleration of ions on crossing the dayside magnetopause. This modelling reveals that the emission commences on each reconnected field line 2–2.5 min after it is opened and peaks 3–5 min after it is opened. We discuss how comparison of the Lyman-

  5. Conformational analysis and design of cross-strand disulfides in antiparallel β-sheets.

    Indu, S; Kochat, V; Thakurela, S; Ramakrishnan, C; Varadarajan, Raghavan

    2011-01-01

    Cross-strand disulfides bridge two cysteines in a registered pair of antiparallel β-strands. A nonredundant data set comprising 5025 polypeptides containing 2311 disulfides was used to study cross-strand disulfides. Seventy-six cross-strand disulfides were found of which 75 and 1 occurred at non-hydrogen-bonded (NHB) and hydrogen-bonded (HB) registered pairs, respectively. Conformational analysis and modeling studies demonstrated that disulfide formation at HB pairs necessarily requires an extremely rare and positive χ¹ value for at least one of the cysteine residues. Disulfides at HB positions also have more unfavorable steric repulsion with the main chain. Thirteen pairs of disulfides were introduced in NHB and HB pairs in four model proteins: leucine binding protein (LBP), leucine, isoleucine, valine binding protein (LIVBP), maltose binding protein (MBP), and Top7. All mutants LIVBP T247C V331C showed disulfide formation either on purification, or on treatment with oxidants. Protein stability in both oxidized and reduced states of all mutants was measured. Relative to wild type, LBP and MBP mutants were destabilized with respect to chemical denaturation, although the sole exposed NHB LBP mutant showed an increase of 3.1°C in T(m). All Top7 mutants were characterized for stability through guanidinium thiocyanate chemical denaturation. Both exposed and two of the three buried NHB mutants were appreciably stabilized. All four HB Top7 mutants were destabilized (ΔΔG⁰ = -3.3 to -6.7 kcal/mol). The data demonstrate that introduction of cross-strand disulfides at exposed NHB pairs is a robust method of improving protein stability. All four exposed Top7 disulfide mutants showed mild redox activity. © 2010 Wiley-Liss, Inc.

  6. Move up,Move out

    Guo Yan

    2007-01-01

    @@ China has already become the world's largest manufacturer of cement,copper and steel.Chinese producers have moved onto the world stage and dominated the global consumer market from textiles to electronics with amazing speed and efficiency.

  7. Experimental evidence for an original two-dimensional phase structure: An antiparallel semifluorinated monolayer at the air-water interface

    El Abed, A.; Faure, M-C.; Pouzet, E.; Abillon, O.

    2002-01-01

    We show the spontaneous formation of an antiparallel monolayer of diblock semifluorinated n-alkane molecules spread at the air-water interface. We used simultaneous measurements of surface pressure and surface potential versus molecular area and performed grazing x-ray reflectivity experiments to characterize the studied monolayer, which is obtained at almost zero surface pressure and precedes the formation of a bilayer at higher surface pressure. Its thickness, equal to 2.7 nm, was found to be independent of the molecular area. This behavior may be explained by van der Waals and electrostatic interactions

  8. Antimicrobial peptide protegrin-3 adopt an antiparallel dimer in the presence of DPC micelles: a high-resolution NMR study

    Usachev, K. S., E-mail: k.usachev@kpfu.ru; Efimov, S. V.; Kolosova, O. A.; Klochkova, E. A.; Aganov, A. V.; Klochkov, V. V. [Kazan Federal University, NMR Laboratory, Institute of Physics (Russian Federation)

    2015-05-15

    A tendency to dimerize in the presence of lipids was found for the protegrin. The dimer formation by the protegrin-1 (PG-1) is the first step for further oligomeric membrane pore formation. Generally there are two distinct model of PG-1 dimerization in either a parallel or antiparallel β-sheet. But despite the wealth of data available today, protegrin dimer structure and pore formation is still not completely understood. In order to investigate a more detailed dimerization process of PG-1 and if it will be the same for another type of protegrins, in this work we used a high-resolution NMR spectroscopy for structure determination of protegrin-3 (RGGGL-CYCRR-RFCVC-VGR) in the presence of perdeuterated DPC micelles and demonstrate that PG-3 forms an antiparallel NCCN dimer with a possible association of these dimers. This structural study complements previously published solution, solid state and computational studies of PG-1 in various environments and validate the potential of mean force simulations of PG-1 dimers and association of dimers to form octameric or decameric β-barrels.

  9. Observation of X-ray lines from a gamma-ray burst (GRB991216): evidence of moving ejecta from the progenitor.

    Piro, L; Garmire, G; Garcia, M; Stratta, G; Costa, E; Feroci, M; Mészáros, P; Vietri, M; Bradt, H; Frail, D; Frontera, F; Halpern, J; Heise, J; Hurley, K; Kawai, N; Kippen, R M; Marshall, F; Murakami, T; Sokolov, V V; Takeshima, T; Yoshida, A

    2000-11-03

    We report on the discovery of two emission features observed in the x-ray spectrum of the afterglow of the gamma-ray burst (GRB) of 16 December 1999 by the Chandra X-ray Observatory. These features are identified with the Ly(alpha) line and the narrow recombination continuum by hydrogenic ions of iron at a redshift z = 1.00 +/- 0.02, providing an unambiguous measurement of the distance of a GRB. Line width and intensity imply that the progenitor of the GRB was a massive star system that ejected, before the GRB event, a quantity of iron approximately 0.01 of the mass of the sun at a velocity approximately 0.1 of the speed of light, probably by a supernova explosion.

  10. A possibility of parallel and anti-parallel diffraction measurements on neu- tron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

    Choi, Yong Nam; Kim, Shin Ae; Kim, Sung Kyu; Kim, Sung Baek; Lee, Chang-Hee; Mikula, Pavel

    2004-07-01

    In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Delta d/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.

  11. Thermal stability of G-rich anti-parallel DNA triplexes upon insertion of LNA and α-l-LNA

    Kosbar, Tamer R.; Sofan, Mamdouh A.; Abou-Zeid, Laila

    2015-01-01

    G-rich anti-parallel DNA triplexes were modified with LNA or α-l-LNA in their Watson-Crick and TFO strands. The triplexes were formed by targeting a pyrimidine strand to a putative hairpin formed by Hoogsteen base pairing in order to use the UV melting method to evaluate the stability...... of the triplexes. Their thermal stability was reduced when the TFO strand was modified with LNA or α-l-LNA. The same trend was observed when the TFO strand and the purine Watson-Crick strand both were modified with LNA. When all triad components were modified with α-l-LNA and LNA in the middle of the triplex...

  12. Moving vertices to make drawings plane

    Goaoc, X.; Kratochvil, J.; Okamoto, Y.; Shin, C.S.; Wolff, A.; Hong, S.K.; Nishizeki, T.; Quan, W.

    2008-01-01

    In John Tantalo’s on-line game Planarity the player is given a non-plane straight-line drawing of a planar graph. The aim is to make the drawing plane as quickly as possible by moving vertices. In this paper we investigate the related problem MinMovedVertices which asks for the minimum number of

  13. The U-line line balancing problem

    Miltenburg, G.J.; Wijngaard, J.

    1994-01-01

    The traditional line balancing (LB) problem considers a production line in which stations are arranged consecutively in a line. A balance is determined by grouping tasks into stations while moving forward (or backward) through a precedence network. Recently many production lines are being arranged

  14. Moving mountains.

    2003-01-01

    What could be more fundamental to management, or more difficult, than motivating people? After all, a manager, by definition, is someone who gets work done through others. But how? A typical recipe for motivation calls for a mixture of persuasion, encouragement, and compulsion. Yet the best leaders, we suspect, need no recipe: They get people to produce great results by appealing to their deepest drives, needs, and desires. And so we discovered when we asked a dozen of the world's top leaders to describe how they each met a daunting challenge in motivating an individual, a team, or an organization. Their answers are as varied as human nature. Some of the leaders appeal to people's need for the rational and the orderly: Mattel's Robert Eckert emphasizes the reassuring power of delivering a consistent message, and HP's Carly Fiorina focuses on facing hard truths on setting step-by-step goals. Some, like celebrated oceanographer Robert Ballard, Pfizer CEO Hank McKinnell, and BP America president Ross Pillari, see the powerful motivating effects of asking people to rise to difficult challenges. Others focus more on the human spirit, appealing to the desire to do something, as BMW's Chris Bangle puts it, "rare, marvelous, and lasting." And quite a few inspire through example, as Dial chairman Herb Baum did when he donated $1,000 from his bonus to each of the company's 155 lowest-paid people. "If you draw the line on your own greed, and your employees see it," he says, "they will be incredibly loyal and perform much better for you." And he has the numbers to prove it. "Right now," he adds, "we're experiencing our lowest level of attrition in 11 years, and we're tracking toward another banner year because people are happy."

  15. A moving experience !

    2005-01-01

    The Transport Service pulled out all the stops and, more specifically, its fleet of moving and lifting equipment for the Discovery Monday on 6 June - a truly moving experience for all the visitors who took part ! Visitors could play at being machine operator, twiddling the controls of a lift truck fitted with a jib to lift a dummy magnet into a wooden mock-up of a beam-line.They had to show even greater dexterity for this game of lucky dip...CERN-style.Those with a head for heights took to the skies 20 m above ground in a telescopic boom lift.Children were allowed to climb up into the operator's cabin - this is one of the cranes used to move the LHC magnets around. Warm thanks to all members of the Transport Service for their participation, especially B. Goicoechea, T. Ilkei, R. Bihery, S. Prodon, S. Pelletier, Y. Bernard, A.  Sallot, B. Pigeard, S. Guinchard, B. Bulot, J. Berrez, Y. Grandjean, A. Bouakkaz, M. Bois, F. Stach, T. Mazzarino and S. Fumey.

  16. Effect of acute and chronic MK-801 administration on extracellular glutamate and ascorbic acid release in the prefrontal cortex of freely moving mice on line with open-field behavior.

    Zuo, Dai-Ying; Zhang, Ya-Hong; Cao, Yue; Wu, Chun-Fu; Tanaka, Masatoshi; Wu, Ying-Liang

    2006-04-04

    The present study was designed to investigate the effects of acute and chronic administration of MK-801 (0.6 mg/kg), a noncompetitive NMDA-receptor antagonist on extracellular glutamate (Glu) and ascorbic acid (AA) release in the prefrontal cortex (PFC) of freely moving mice using in vivo microdialysis with open-field behavior. In line with earlier studies, acute administration of MK-801 induced an increase of Glu in the PFC. We also observed single MK-801 treatment increased AA release in the PFC. In addition, our results indicated that the basal AA levels in the PFC after MK-801 administration for 7 consecutive days were significantly decreased, and basal Glu levels also had a decreased tendency. After chronic administration (0.6 mg/kg, 7 days), MK-801 (0.6 mg/kg) challenge significantly decreased dialysate levels of AA and Glu. Our study also found that both acute and chronic administration of MK-801 induced hyperactivity in mice, but the intensity of acute administration was more than that of chronic administration. Furthermore, in all acute treatment mice, individual changes in Glu dialysate concentrations and the numbers of locomotion were positively correlated. In conclusion, this study may provide new evidence that a single MK-801 administration induces increases of dialysate AA and Glu concentrations in the PFC of freely moving mice, which are opposite to those induced by repeated MK-801 administration, with an unknown mechanism. Our results suggested that redox-response might play an important role in the model of schizophrenic symptoms induced by MK-801.

  17. T.C.G triplet in an antiparallel purine.purine.pyrimidine DNA triplex. Conformational studies by NMR.

    Dittrich, K; Gu, J; Tinder, R; Hogan, M; Gao, X

    1994-04-12

    The antiparallel purine.purine.pyrimidine DNA triplex, RRY6, which contains a T.C.G inverted triplet in the center of the sequence, was examined by proton and phosphorous two-dimensional NMR spectroscopy. The local conformation of the T.C.G triplet (T4.C11.G18) and the effect of this triplet on the global helical structure were analyzed in detail. The formation of the T.C.G triplet is confirmed by a set of cross-strand NOEs, including unusual cross-strand NOEs between the third strand and the pyrimidine strand as opposed to the purine strand of the duplex. NMR data suggest that the T.C.G triplet may be present in an equilibrium between a non-hydrogen-bonded form and a T(O4)-C(NH2) hydrogen-bonded form and that there is a distortion of the in-plane alignment of the three bases. The flanking G.G.C base triplets are well-defined on the 5'-side of T4, but somewhat interrupted on the 3'-side of T4. The effect of the third strand binding on the Watson-Crick duplex was probed by an NMR study of the free duplex RY6. NMR parameters are affected mostly around the T.C.G inversion site. The perturbations extend to at least two adjacent base triplets on either side. The binding of the third purine strand and the accommodation of a central T.C.G inversion in RRY6 does not require a readjustment in sugar pucker, which remains in the range of C2'-endo. 31P resonances of RRY6 distribute over a range of 2.2 ppm. The H-P coupling patterns of the third strand differ from those of the duplex. General spectral patterns defined by the marker protons of the RRY and YRY triplexes are compared.

  18. Antiparallel Dynamic Covalent Chemistries

    Matysiak, Bartosz M.; Nowak, Piotr; Cvrtila, Ivica; Pappas, Charalampos G.; Liu, Bin; Komaromy, David; Otto, Sijbren

    2017-01-01

    The ability to design reaction networks with high, but addressable complexity is a necessary prerequisite to make advanced functional chemical systems. Dynamic combinatorial chemistry has, proven to be a useful tool in achieving complexity, however with some limitations in controlling it. Herein we

  19. Collisionless reconnection: magnetic field line interaction

    R. A. Treumann

    2012-10-01

    Full Text Available Magnetic field lines are quantum objects carrying one quantum Φ0 = 2πh/e of magnetic flux and have finite radius λm. Here we argue that they possess a very specific dynamical interaction. Parallel field lines reject each other. When confined to a certain area they form two-dimensional lattices of hexagonal structure. We estimate the filling factor of such an area. Anti-parallel field lines, on the other hand, attract each other. We identify the physical mechanism as being due to the action of the gauge potential field, which we determine quantum mechanically for two parallel and two anti-parallel field lines. The distortion of the quantum electrodynamic vacuum causes a cloud of virtual pairs. We calculate the virtual pair production rate from quantum electrodynamics and estimate the virtual pair cloud density, pair current and Lorentz force density acting on the field lines via the pair cloud. These properties of field line dynamics become important in collisionless reconnection, consistently explaining why and how reconnection can spontaneously set on in the field-free centre of a current sheet below the electron-inertial scale.

  20. A-Track: Detecting Moving Objects in FITS images

    Atay, T.; Kaplan, M.; Kilic, Y.; Karapinar, N.

    2017-04-01

    A-Track is a fast, open-source, cross-platform pipeline for detecting moving objects (asteroids and comets) in sequential telescope images in FITS format. The moving objects are detected using a modified line detection algorithm.

  1. Job Surfing: Move On to Move Up.

    Martin, Justin

    1997-01-01

    Looks at the process of switching jobs and changing careers. Discusses when to consider options and make the move as well as the need to be flexible and open minded. Provides a test for determining the chances of promotion and when to move on. (JOW)

  2. Structure of Rhodococcus equi virulence-associated protein B (VapB) reveals an eight-stranded antiparallel β-barrel consisting of two Greek-key motifs

    Geerds, Christina; Wohlmann, Jens; Haas, Albert; Niemann, Hartmut H.

    2014-01-01

    The structure of VapB, a member of the Vap protein family that is involved in virulence of the bacterial pathogen R. equi, was determined by SAD phasing and reveals an eight-stranded antiparallel β-barrel similar to avidin, suggestive of a binding function. Made up of two Greek-key motifs, the topology of VapB is unusual or even unique. Members of the virulence-associated protein (Vap) family from the pathogen Rhodococcus equi regulate virulence in an unknown manner. They do not share recognizable sequence homology with any protein of known structure. VapB and VapA are normally associated with isolates from pigs and horses, respectively. To contribute to a molecular understanding of Vap function, the crystal structure of a protease-resistant VapB fragment was determined at 1.4 Å resolution. The structure was solved by SAD phasing employing the anomalous signal of one endogenous S atom and two bound Co ions with low occupancy. VapB is an eight-stranded antiparallel β-barrel with a single helix. Structural similarity to avidins suggests a potential binding function. Unlike other eight- or ten-stranded β-barrels found in avidins, bacterial outer membrane proteins, fatty-acid-binding proteins and lysozyme inhibitors, Vaps do not have a next-neighbour arrangement but consist of two Greek-key motifs with strand order 41238567, suggesting an unusual or even unique topology

  3. Structure of Rhodococcus equi virulence-associated protein B (VapB) reveals an eight-stranded antiparallel β-barrel consisting of two Greek-key motifs

    Geerds, Christina [Bielefeld University, Universitaetsstrasse 25, 33615 Bielefeld (Germany); Wohlmann, Jens; Haas, Albert [University of Bonn, Ulrich-Haberland Strasse 61a, 53121 Bonn (Germany); Niemann, Hartmut H., E-mail: hartmut.niemann@uni-bielefeld.de [Bielefeld University, Universitaetsstrasse 25, 33615 Bielefeld (Germany)

    2014-06-18

    The structure of VapB, a member of the Vap protein family that is involved in virulence of the bacterial pathogen R. equi, was determined by SAD phasing and reveals an eight-stranded antiparallel β-barrel similar to avidin, suggestive of a binding function. Made up of two Greek-key motifs, the topology of VapB is unusual or even unique. Members of the virulence-associated protein (Vap) family from the pathogen Rhodococcus equi regulate virulence in an unknown manner. They do not share recognizable sequence homology with any protein of known structure. VapB and VapA are normally associated with isolates from pigs and horses, respectively. To contribute to a molecular understanding of Vap function, the crystal structure of a protease-resistant VapB fragment was determined at 1.4 Å resolution. The structure was solved by SAD phasing employing the anomalous signal of one endogenous S atom and two bound Co ions with low occupancy. VapB is an eight-stranded antiparallel β-barrel with a single helix. Structural similarity to avidins suggests a potential binding function. Unlike other eight- or ten-stranded β-barrels found in avidins, bacterial outer membrane proteins, fatty-acid-binding proteins and lysozyme inhibitors, Vaps do not have a next-neighbour arrangement but consist of two Greek-key motifs with strand order 41238567, suggesting an unusual or even unique topology.

  4. Distinct solvent- and temperature-dependent packing arrangements of anti-parallel β-sheet polyalanines studied with solid-state 13C NMR and MD simulation.

    Kametani, Shunsuke; Tasei, Yugo; Nishimura, Akio; Asakura, Tetsuo

    2017-08-09

    Polyalanine (polyA) sequences are well known as the simplest sequence that naturally forms anti-parallel β-sheets and constitute a key element in the structure of spider and wild silkworm silk fibers. We have carried out a systematic analysis of the packing of anti-parallel β-sheets for (Ala) n , n = 5, 6, 7 and 12, using primarily 13 C solid-state NMR and MD simulation. HFIP and TFA are frequently used as the dope solvents for recombinant silks, and polyA was solidified from both HFIP and TFA solutions by drying. An analysis of Ala Cβ peaks in the 13 C CP/MAS NMR spectra indicated that polyA from HFIP was mainly rectangular but polyA from TFA was mainly staggered. The transition from the rectangular to the staggered arrangement in (Ala) 6 was observed for the first time from the change in the Ala Cβ peak through heat treatment at 200 °C for 4 h. The removal of the bound water was confirmed by thermal analysis. This transition could be reproduced by MD simulation of (Ala) 6 molecules at 200 °C after removal of the bound water molecules. In this way, the origin of the stability of the different packing arrangements of polyA was clarified.

  5. Moving ring reactor 'Karin-1'

    1983-12-01

    The conceptual design of a moving ring reactor ''Karin-1'' has been carried out to advance fusion system design, to clarify the research and development problems, and to decide their priority. In order to attain these objectives, a D-T reactor with tritium breeding blanket is designed, a commercial reactor with net power output of 500 MWe is designed, the compatibility of plasma physics with fusion engineering is demonstrated, and some other guideline is indicated. A moving ring reactor is composed mainly of three parts. In the first formation section, a plasma ring is formed and heated up to ignition temperature. The plasma ring of compact torus is transported from the formation section through the next burning section to generate fusion power. Then the plasma ring moves into the last recovery section, and the energy and particles of the plasma ring are recovered. The outline of a moving ring reactor ''Karin-1'' is described. As a candidate material for the first wall, SiC was adopted to reduce the MHD effect and to minimize the interaction with neutrons and charged particles. The thin metal lining was applied to the SiC surface to solve the problem of the compatibility with lithium blanket. Plasma physics, the engineering aspect and the items of research and development are described. (Kako, I.)

  6. Moving and Being Moved: Implications for Practice.

    Kretchmar, R. Scott

    2000-01-01

    Uses philosophical writings, a novel about baseball, and a nonfiction work on rowing to analyze levels of meaning in physical activity, showing why three popular methods for enhancing meaning have not succeeded and may have moved some students away from deeper levels of meaning. The paper suggests that using hints taken from the three books could…

  7. Radiation by moving charges

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2017-04-01

    It is generally accepted that in order to describe the dynamics of relativistic particles in the laboratory (lab) frame it is sufficient to take into account the relativistic dependence of the particle momenta on the velocity. This solution of the dynamics problem in the lab frame makes no reference to Lorentz transformations. For this reason they are not discussed in particle tracking calculations in accelerator and plasma physics. It is generally believed that the electrodynamics problem can be treated within the same ''single inertial frame'' description without reference to Lorentz transformations. In particular, in order to evaluate radiation fields arising from charged particles in motion we need to know their velocities and positions as a function of the lab frame time t. The relativistic motion of a particle in the lab frame is described by Newton's second law ''corrected'' for the relativistic dependence of momentum on velocity. It is assumed in all standard derivations that one can perform identification of the trajectories in the source part of the usual Maxwell's equations with the trajectories vector x(t) measured (or calculated by using the corrected Newton's second law) in the lab frame. This way of coupling fields and particles is considered since more than a century as the relativistically correct procedure.We argue that this procedure needs to be changed, and we demonstrate the following, completely counterintuitive statement: the results of conventional theory of radiation by relativistically moving charges are not consistent with the principle of relativity. In order to find the trajectory of a particle in the lab frame consistent with the usual Maxwell's equations, one needs to solve the dynamic equation inmanifestly covariant form by using the coordinate-independent proper time τ to parameterize the particle world-line in space-time. We show that there is a difference between ''true'' particle trajectory vector x(t) calculated or measured in

  8. Moving Field Guides

    Cassie Meador; Mark Twery; Meagan. Leatherbury

    2011-01-01

    The Moving Field Guides (MFG) project is a creative take on site interpretation. Moving Field Guides provide an example of how scientific and artistic endeavors work in parallel. Both begin with keen observations that produce information that must be analyzed, understood, and interpreted. That interpretation then needs to be communicated to others to complete the...

  9. People on the Move

    Mohan, Audrey

    2018-01-01

    The purpose of this 2-3 day lesson is to introduce students in Grades 2-4 to the idea that people move around the world for a variety of reasons. In this activity, students explore why people move through class discussion, a guided reading, and interviews. The teacher elicits student ideas using the compelling question (Dimension 1 of the C3…

  10. Evidence for Intramolecular Antiparallel Beta-Sheet Structure in Alpha-Synuclein Fibrils from a Combination of Two-Dimensional Infrared Spectroscopy and Atomic Force Microscopy

    Roeters, Steven J.; Iyer, Aditya; Pletikapić, Galja; Kogan, Vladimir; Subramaniam, Vinod; Woutersen, Sander

    2017-01-01

    The aggregation of the intrinsically disordered protein alpha-synuclein (αS) into amyloid fibrils is thought to play a central role in the pathology of Parkinson’s disease. Using a combination of techniques (AFM, UV-CD, XRD, and amide-I 1D- and 2D-IR spectroscopy) we show that the structure of αS fibrils varies as a function of ionic strength: fibrils aggregated in low ionic-strength buffers ([NaCl] ≤ 25 mM) have a significantly different structure than fibrils grown in higher ionic-strength buffers. The observations for fibrils aggregated in low-salt buffers are consistent with an extended conformation of αS molecules, forming hydrogen-bonded intermolecular β-sheets that are loosely packed in a parallel fashion. For fibrils aggregated in high-salt buffers (including those prepared in buffers with a physiological salt concentration) the measurements are consistent with αS molecules in a more tightly-packed, antiparallel intramolecular conformation, and suggest a structure characterized by two twisting stacks of approximately five hydrogen-bonded intermolecular β-sheets each. We find evidence that the high-frequency peak in the amide-I spectrum of αS fibrils involves a normal mode that differs fundamentally from the canonical high-frequency antiparallel β-sheet mode. The high sensitivity of the fibril structure to the ionic strength might form the basis of differences in αS-related pathologies.

  11. Embodied affectivity: On moving and being moved

    Thomas eFuchs

    2014-06-01

    Full Text Available There is a growing body of research indicating that bodily sensation and behaviour strongly influences one’s emotional reaction towards certain situations or objects. On this background, a framework model of embodied affectivity is suggested: we regard emotions as resulting from the circular interaction between affective qualities or affordances in the environment and the subject’s bodily resonance, be it in the form of sensations, postures, expressive movements or movement tendencies. Motion and emotion are thus intrinsically connected: one is moved by movement (perception; impression; affection and moved to move (action; expression; e-motion. Through its resonance, the body functions as a medium of emotional perception: it colours or charges self-experience and the environment with affective valences while it remains itself in the background of one’s own awareness. This model is then applied to emotional social understanding or interaffectivity which is regarded as an intertwinement of two cycles of embodied affectivity, thus continuously modifying each partner’s affective affordances and bodily resonance. We conclude with considerations of how embodied affectivity is altered in psychopathology and can be addressed in psychotherapy of the embodied self.

  12. Teaching Braille Line Tracking Using Stimulus Fading

    Scheithauer, Mindy C.; Tiger, Jeffrey H.

    2014-01-01

    Line tracking is a prerequisite skill for braille literacy that involves moving one's finger horizontally across a line of braille text and identifying when a line ends so the reader may reset his or her finger on the subsequent line. Current procedures for teaching line tracking are incomplete, because they focus on tracking lines with only…

  13. Determination of accurate 1H positions of an alanine tripeptide with anti-parallel and parallel β-sheet structures by high resolution 1H solid state NMR and GIPAW chemical shift calculation.

    Yazawa, Koji; Suzuki, Furitsu; Nishiyama, Yusuke; Ohata, Takuya; Aoki, Akihiro; Nishimura, Katsuyuki; Kaji, Hironori; Shimizu, Tadashi; Asakura, Tetsuo

    2012-11-25

    The accurate (1)H positions of alanine tripeptide, A(3), with anti-parallel and parallel β-sheet structures could be determined by highly resolved (1)H DQMAS solid-state NMR spectra and (1)H chemical shift calculation with gauge-including projector augmented wave calculations.

  14. PARALLEL MOVING MECHANICAL SYSTEMS

    Florian Ion Tiberius Petrescu

    2014-09-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Moving mechanical systems parallel structures are solid, fast, and accurate. Between parallel systems it is to be noticed Stewart platforms, as the oldest systems, fast, solid and precise. The work outlines a few main elements of Stewart platforms. Begin with the geometry platform, kinematic elements of it, and presented then and a few items of dynamics. Dynamic primary element on it means the determination mechanism kinetic energy of the entire Stewart platforms. It is then in a record tail cinematic mobile by a method dot matrix of rotation. If a structural mottoelement consists of two moving elements which translates relative, drive train and especially dynamic it is more convenient to represent the mottoelement as a single moving components. We have thus seven moving parts (the six motoelements or feet to which is added mobile platform 7 and one fixed.

  15. The Moving image

    Hansen, Lennard Højbjerg

    2014-01-01

    Every day we are presented with bodily expressions in audiovisual media – by anchors, journalists and characters in films for instance. This article explores how body language in the moving image has been and can be approached in a scholarly manner.......Every day we are presented with bodily expressions in audiovisual media – by anchors, journalists and characters in films for instance. This article explores how body language in the moving image has been and can be approached in a scholarly manner....

  16. Radiation by moving charges

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2017-04-15

    It is generally accepted that in order to describe the dynamics of relativistic particles in the laboratory (lab) frame it is sufficient to take into account the relativistic dependence of the particle momenta on the velocity. This solution of the dynamics problem in the lab frame makes no reference to Lorentz transformations. For this reason they are not discussed in particle tracking calculations in accelerator and plasma physics. It is generally believed that the electrodynamics problem can be treated within the same ''single inertial frame'' description without reference to Lorentz transformations. In particular, in order to evaluate radiation fields arising from charged particles in motion we need to know their velocities and positions as a function of the lab frame time t. The relativistic motion of a particle in the lab frame is described by Newton's second law ''corrected'' for the relativistic dependence of momentum on velocity. It is assumed in all standard derivations that one can perform identification of the trajectories in the source part of the usual Maxwell's equations with the trajectories vector x(t) measured (or calculated by using the corrected Newton's second law) in the lab frame. This way of coupling fields and particles is considered since more than a century as the relativistically correct procedure.We argue that this procedure needs to be changed, and we demonstrate the following, completely counterintuitive statement: the results of conventional theory of radiation by relativistically moving charges are not consistent with the principle of relativity. In order to find the trajectory of a particle in the lab frame consistent with the usual Maxwell's equations, one needs to solve the dynamic equation inmanifestly covariant form by using the coordinate-independent proper time τ to parameterize the particle world-line in space-time. We show that there is a difference between &apos

  17. Structural analysis of alanine tripeptide with antiparallel and parallel beta-sheet structures in relation to the analysis of mixed beta-sheet structures in Samia cynthia ricini silk protein fiber using solid-state NMR spectroscopy.

    Asakura, Tetsuo; Okonogi, Michi; Nakazawa, Yasumoto; Yamauchi, Kazuo

    2006-05-10

    The structural analysis of natural protein fibers with mixed parallel and antiparallel beta-sheet structures by solid-state NMR is reported. To obtain NMR parameters that can characterize these beta-sheet structures, (13)C solid-state NMR experiments were performed on two alanine tripeptide samples: one with 100% parallel beta-sheet structure and the other with 100% antiparallel beta-sheet structure. All (13)C resonances of the tripeptides could be assigned by a comparison of the methyl (13)C resonances of Ala(3) with different [3-(13)C]Ala labeling schemes and also by a series of RFDR (radio frequency driven recoupling) spectra observed by changing mixing times. Two (13)C resonances observed for each Ala residue could be assigned to two nonequivalent molecules per unit cell. Differences in the (13)C chemical shifts and (13)C spin-lattice relaxation times (T(1)) were observed between the two beta-sheet structures. Especially, about 3 times longer T(1) values were obtained for parallel beta-sheet structure as compared to those of antiparallel beta-sheet structure, which could be explicable by the difference in the hydrogen-bond networks of both structures. This very large difference in T(1) becomes a good measure to differentiate between parallel or antiparallel beta-sheet structures. These differences in the NMR parameters found for the tripeptides may be applied to assign the parallel and antiparallel beta-sheet (13)C resonances in the asymmetric and broad methyl spectra of [3-(13)C]Ala silk protein fiber of a wild silkworm, Samia cynthia ricini.

  18. Moving a House by Moved Participants

    Axel, Erik

    himself in controlling every detail of the shape of the concrete slaps. He pushed all the other participants of the meetings, asking for details, information, the change of drawings etc. He explained the technical issues he was pursuing, was prepared for problems at the meetings, was well informed, always......? The participant observer believed it was a matter of changing coordinates, but the engineers immediately saw it was an issue of pipes in the ground, could they be moved and still function as planned? To decide the possibility of this suggestion the engineer was given the task of investigating the consequences...... they saw him as a bit pushy. On the other hand they understood why he was so since his firm would be fined if the concrete slabs did not meet specifications. The case will be the basis for a discussion of double motivation of the engineer, his evident interest in his professional work, and the wish...

  19. MOVES regional level sensitivity analysis

    2012-01-01

    The MOVES Regional Level Sensitivity Analysis was conducted to increase understanding of the operations of the MOVES Model in regional emissions analysis and to highlight the following: : the relative sensitivity of selected MOVES Model input paramet...

  20. Move of ground water

    Kimura, Shigehiko

    1983-01-01

    As a ground water flow which is difficult to explain by Darcy's theory, there is stagnant water in strata, which moves by pumping and leads to land subsidence. This is now a major problem in Japan. Such move on an extensive scale has been investigated in detail by means of 3 H such as from rainfall in addition to ordinary measurement. The move of ground water is divided broadly into that in an unsaturated stratum from ground surface to water-table and that in a saturated stratum below the water-table. The course of the analyses made so far by 3 H contained in water, and the future trend of its usage are described. A flow model of regarding water as plastic fluid and its flow as channel assembly may be available for some flow mechanism which is not possible to explain with Darcy's theory. (Mori, K.)

  1. Moving toroidal limiter

    Ikuta, Kazunari; Miyahara, Akira.

    1983-06-01

    The concept of the limiter-divertor proposed by Mirnov is extended to a toroidal limiter-divertor (which we call moving toroidal limiter) using the stream of ferromagnetic balls coated with a low Z materials such as plastics, graphite and ceramics. An important advantage of the use of the ferromagnetic materials would be possible soft landing of the balls on a catcher, provided that the temperature of the balls is below Curie point. Moreover, moving toroidal limiter would work as a protector of the first wall not only against the vertical movement of plasma ring but also against the violent inward motion driven by major disruption because the orbit of the ball in the case of moving toroidal limiter distributes over the small major radius side of the toroidal plasma. (author)

  2. Moving to Jobs?

    Dave Maré; Jason Timmins

    2003-01-01

    This paper examines whether New Zealand residents move from low-growth to high-growth regions, using New Zealand census data from the past three inter-censal periods (covering 1986-2001). We focus on the relationship between employment growth and migration flows to gauge the strength of the relationship and the stability of the relationship over the business cycle. We find that people move to areas of high employment growth, but that the probability of leaving a region is less strongly relate...

  3. Density functional theory study of β-hairpins in antiparallel β-sheets, a new classification based upon H-bond topology.

    Roy, Dipankar; Pohl, Gabor; Ali-Torres, Jorge; Marianski, Mateusz; Dannenberg, J J

    2012-07-10

    We present a new classification of β-turns specific to antiparallel β-sheets based upon the topology of H-bond formation. This classification results from ONIOM calculations using B3LYP/D95** density functional theory and AM1 semiempirical calculations as the high and low levels, respectively. We chose acetyl(Ala)(6)NH(2) as a model system as it is the simplest all-alanine system that can form all the H-bonds required for a β-turn in a sheet. Of the 10 different conformations we have found, the most stable structures have C(7) cyclic H-bonds in place of the C(10) interactions specified in the classic definition. Also, the chiralities specified for residues i + 1 and i + 2 in the classic definition disappear when the structures are optimized using our techniques, as the energetic differences among the four diastereomers of each structure are not substantial for 8 of the 10 conformations.

  4. Modeling of arylamide helix mimetics in the p53 peptide binding site of hDM2 suggests parallel and anti-parallel conformations are both stable.

    Jonathan C Fuller

    Full Text Available The design of novel α-helix mimetic inhibitors of protein-protein interactions is of interest to pharmaceuticals and chemical genetics researchers as these inhibitors provide a chemical scaffold presenting side chains in the same geometry as an α-helix. This conformational arrangement allows the design of high affinity inhibitors mimicking known peptide sequences binding specific protein substrates. We show that GAFF and AutoDock potentials do not properly capture the conformational preferences of α-helix mimetics based on arylamide oligomers and identify alternate parameters matching solution NMR data and suitable for molecular dynamics simulation of arylamide compounds. Results from both docking and molecular dynamics simulations are consistent with the arylamides binding in the p53 peptide binding pocket. Simulations of arylamides in the p53 binding pocket of hDM2 are consistent with binding, exhibiting similar structural dynamics in the pocket as simulations of known hDM2 binders Nutlin-2 and a benzodiazepinedione compound. Arylamide conformations converge towards the same region of the binding pocket on the 20 ns time scale, and most, though not all dihedrals in the binding pocket are well sampled on this timescale. We show that there are two putative classes of binding modes for arylamide compounds supported equally by the modeling evidence. In the first, the arylamide compound lies parallel to the observed p53 helix. In the second class, not previously identified or proposed, the arylamide compound lies anti-parallel to the p53 helix.

  5. Combined Usage of TanDEM-X and CryoSat-2 for Generating a High Resolution Digital Elevation Model of Fast Moving Ice Stream and Its Application in Grounding Line Estimation

    Seung Hee Kim

    2017-02-01

    Full Text Available Definite surface topography of ice provides fundamental information for most glaciologists to study climate change. However, the topography at the marginal region of ice sheets exhibits noticeable dynamical changes from fast flow velocity and large thinning rates; thus, it is difficult to determine instantaneous topography. In this study, the surface topography of the marginal region of Thwaites Glacier in the Amundsen Sector of West Antarctica, where ice melting and thinning are prevailing, is extracted using TanDEM-X interferometry in combination with data from the near-coincident CryoSat-2 radar altimeter. The absolute height offset, which has been a persistent problem in applying the interferometry technique for generating DEMs, is determined by linear least-squares fitting between the uncorrected TanDEM-X heights and reliable reference heights from CryoSat-2. The reliable heights are rigorously selected at locations of high normalized cross-correlation and low RMS heights between segments of data points. The generated digital elevation model with the resolved absolute height offset is assessed with airborne laser altimeter data from the Operation IceBridge that were acquired five months after TanDEM-X and show high correlation with biases of 3.19 m and −4.31 m at the grounding zone and over the ice sheet surface, respectively. For practical application of the generated DEM, grounding line estimation assuming hydrostatic equilibrium was carried out, and the feasibility was seen through comparison with the previous grounding line. Finally, it is expected that the combination of interferometry and altimetery with similar datasets can be applied at regions even with a lack of ground control points.

  6. Libraries on the MOVE.

    Edgar, Jim; And Others

    1986-01-01

    Presents papers from Illinois State Library and Shawnee Library System's "Libraries on the MOVE" conference focusing on how libraries can impact economic/cultural climate of an area. Topics addressed included information services of rural libraries; marketing; rural library development; library law; information access; interagency…

  7. Sense of moving

    Christensen, Mark Schram; Grünbaum, Thor

    2017-01-01

    In this chapter, we assume the existence of a sense of “movement activity” that arises when a person actively moves a body part. This sense is usually supposed to be part of sense of agency (SoA). The purpose of the chapter is to determine whether the already existing experimental paradigms can...

  8. Indexing Moving Points

    Agarwal, Pankaj K.; Arge, Lars Allan; Erickson, Jeff

    2003-01-01

    We propose three indexing schemes for storing a set S of N points in the plane, each moving along a linear trajectory, so that any query of the following form can be answered quickly: Given a rectangle R and a real value t, report all K points of S that lie inside R at time t. We first present an...

  9. Moving up in industry.

    Covell, Charlotte

    2016-01-23

    Charlotte Covell is commercial business manager at Virbac UK, a role that gives her responsibility for the company's sales to corporate practices, some buying groups and internet pharmacies. She began her career as a veterinary nurse, but moved into industry and now has a role in senior business management. British Veterinary Association.

  10. Optics of moving media

    Piwnicki, P.; Leonhardt, U.

    2001-01-01

    Light experiences a moving medium as an effective gravitational field. In the limit of low medium velocities the medium flow plays the role of a magnetic vector potential. We review the background of our theory [U. Leonhardt and P. Piwnicki, Phys. Rev. A 60, 4301 (1999); Phys. Rev. Lett. 84, 822 (2000)], including our proposal of making optical black holes.

  11. Moving Another Big Desk.

    Fawcett, Gay

    1996-01-01

    New ways of thinking about leadership require that leaders move their big desks and establish environments that encourage trust and open communication. Educational leaders must trust their colleagues to make wise choices. When teachers are treated democratically as leaders, classrooms will also become democratic learning organizations. (SM)

  12. Making Images That Move

    Rennie, Richard

    2015-01-01

    The history of the moving image (the cinema) is well documented in books and on the Internet. This article offers a number of activities that can easily be carried out in a science class. They make use of the phenomenon of "Persistence of Vision." The activities presented herein demonstrate the functionality of the phenakistoscope, the…

  13. Aboard the "Moving School."

    Ainscow, Mel; Hopkins, David

    1992-01-01

    In many countries, education legislation embodies contradictory pressures for centralization and decentralization. In the United Kingdom, there is growing government control over policy and direction of schools; schools are also being given more responsibility for resource management. "Moving" schools within Improving the Quality of…

  14. CONSUMER PROTECTION: Federal Actions Are Needed to Improve Oversight of the Household Goods Moving Industry

    2001-01-01

    The ICC Termination Act of 1995 transferred federal responsibilities for protecting consumers who move their household goods across state lines using commercial moving companies to the Department of Transportation...

  15. Moving in Circles

    Simonsen, Gunvor

    2008-01-01

    The article examines the development of African diaspora history during the last fifty years. It outlines the move from a focus on African survivals to a focus on deep rooted cultural principles and back again to a revived interest in concrete cultural transfers from Africa to the Americas....... This circular movement can be explained by a combination of elements characterizing African Atlantic and black Atlantic history. Among them is a lack of attention to questions of periodisation and change. Likewise, it has proven difficult to conceptualize Africa and America at one and the same time...... as characterized by cultural diversity and variation. Moreover, the field has been haunted by a tendency of moving to easily from descriptive evidence to conclusions about African identity in the Americas. A promising way to overcome these problems, it is suggested, is to develop research that focuses on single...

  16. Electric moving shadow garden

    Bracey, Andrew

    2010-01-01

    Electric Moving Shadow Garden is a multi-directional exploration of the links between artists and cinema, with multiple reference and contextual points. it accompanied the exhibition, UnSpooling: Artists & Cinema, curated by Bracey and Dave Griffiths at Corernhouse, Manchester, who also edited the publication. Published to accompany the Cornerhouse exhibition, UnSpooling: Artists & Cinema, curated by artists Andrew Bracey and Dave Griffiths. This illustrated catalogue explores how internat...

  17. TCR moves to MCR

    Peter Sollander, AB/OP/TI

    2005-01-01

    The monitoring of CERN's technical infrastructure has moved from the Technical Control Room in building 212 to the Meyrin Control Room (MCR) in building 354 (see map) and from the TS/CSE group to AB/OP. The operation's team as well as the services provided remain the same as before and you can still reach the operator on shift by calling 72201. Peter Sollander, AB/OP/TI

  18. CERN Pension Fund move

    HR Department

    2007-01-01

    The CERN Pension Fund has moved to new offices on the 5th floor of Building 5. The Benefits Service of the Fund is now located in Offices 5-5-017 - 5-5-021 - 5-5-023. We remind you that the office hours are: Tuesday/Wednesday/Thursday from 10 am to 12 am and from 3 pm to 5 pm. The Fund would like to take this opportunity to warmly thank all the persons involved in the relocation.

  19. Lecture - "Move! Eat better"

    2012-01-01

    As part of the "Move! Eat better" campaign, Novae’s nutrition adviser, Irène Rolfo, will give a talk on the subject of everyday good nutrition. This will be held in the main building auditorium at 12:30 on Thursday, 20 September 2012. Don’t miss this informative event. For more information, go to http://cern.ch/bpmm            

  20. Mixed Lubricated Line Contacts

    Faraon, I.C.

    2005-01-01

    The present work deals with friction in mixed lubricated line contacts. Components in systems are becoming smaller and due to, for instance power transmitted, partial contact may occur. In industrial applications, friction between the moving contacting surfaces cannot be avoided, therefore it is

  1. The Crystal Structures of the N-terminal Photosensory Core Module of Agrobacterium Phytochrome Agp1 as Parallel and Anti-parallel Dimers.

    Nagano, Soshichiro; Scheerer, Patrick; Zubow, Kristina; Michael, Norbert; Inomata, Katsuhiko; Lamparter, Tilman; Krauß, Norbert

    2016-09-23

    Agp1 is a canonical biliverdin-binding bacteriophytochrome from the soil bacterium Agrobacterium fabrum that acts as a light-regulated histidine kinase. Crystal structures of the photosensory core modules (PCMs) of homologous phytochromes have provided a consistent picture of the structural changes that these proteins undergo during photoconversion between the parent red light-absorbing state (Pr) and the far-red light-absorbing state (Pfr). These changes include secondary structure rearrangements in the so-called tongue of the phytochrome-specific (PHY) domain and structural rearrangements within the long α-helix that connects the cGMP-specific phosphodiesterase, adenylyl cyclase, and FhlA (GAF) and the PHY domains. We present the crystal structures of the PCM of Agp1 at 2.70 Å resolution and of a surface-engineered mutant of this PCM at 1.85 Å resolution in the dark-adapted Pr states. Whereas in the mutant structure the dimer subunits are in anti-parallel orientation, the wild-type structure contains parallel subunits. The relative orientations between the PAS-GAF bidomain and the PHY domain are different in the two structures, due to movement involving two hinge regions in the GAF-PHY connecting α-helix and the tongue, indicating pronounced structural flexibility that may give rise to a dynamic Pr state. The resolution of the mutant structure enabled us to detect a sterically strained conformation of the chromophore at ring A that we attribute to the tight interaction with Pro-461 of the conserved PRXSF motif in the tongue. Based on this observation and on data from mutants where residues in the tongue region were replaced by alanine, we discuss the crucial roles of those residues in Pr-to-Pfr photoconversion. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  2. The Crystal Structures of the N-terminal Photosensory Core Module of Agrobacterium Phytochrome Agp1 as Parallel and Anti-parallel Dimers*

    Nagano, Soshichiro; Scheerer, Patrick; Zubow, Kristina; Michael, Norbert; Inomata, Katsuhiko; Lamparter, Tilman; Krauß, Norbert

    2016-01-01

    Agp1 is a canonical biliverdin-binding bacteriophytochrome from the soil bacterium Agrobacterium fabrum that acts as a light-regulated histidine kinase. Crystal structures of the photosensory core modules (PCMs) of homologous phytochromes have provided a consistent picture of the structural changes that these proteins undergo during photoconversion between the parent red light-absorbing state (Pr) and the far-red light-absorbing state (Pfr). These changes include secondary structure rearrangements in the so-called tongue of the phytochrome-specific (PHY) domain and structural rearrangements within the long α-helix that connects the cGMP-specific phosphodiesterase, adenylyl cyclase, and FhlA (GAF) and the PHY domains. We present the crystal structures of the PCM of Agp1 at 2.70 Å resolution and of a surface-engineered mutant of this PCM at 1.85 Å resolution in the dark-adapted Pr states. Whereas in the mutant structure the dimer subunits are in anti-parallel orientation, the wild-type structure contains parallel subunits. The relative orientations between the PAS-GAF bidomain and the PHY domain are different in the two structures, due to movement involving two hinge regions in the GAF-PHY connecting α-helix and the tongue, indicating pronounced structural flexibility that may give rise to a dynamic Pr state. The resolution of the mutant structure enabled us to detect a sterically strained conformation of the chromophore at ring A that we attribute to the tight interaction with Pro-461 of the conserved PRXSF motif in the tongue. Based on this observation and on data from mutants where residues in the tongue region were replaced by alanine, we discuss the crucial roles of those residues in Pr-to-Pfr photoconversion. PMID:27466363

  3. Camouflage, detection and identification of moving targets.

    Hall, Joanna R; Cuthill, Innes C; Baddeley, Roland; Shohet, Adam J; Scott-Samuel, Nicholas E

    2013-05-07

    Nearly all research on camouflage has investigated its effectiveness for concealing stationary objects. However, animals have to move, and patterns that only work when the subject is static will heavily constrain behaviour. We investigated the effects of different camouflages on the three stages of predation-detection, identification and capture-in a computer-based task with humans. An initial experiment tested seven camouflage strategies on static stimuli. In line with previous literature, background-matching and disruptive patterns were found to be most successful. Experiment 2 showed that if stimuli move, an isolated moving object on a stationary background cannot avoid detection or capture regardless of the type of camouflage. Experiment 3 used an identification task and showed that while camouflage is unable to slow detection or capture, camouflaged targets are harder to identify than uncamouflaged targets when similar background objects are present. The specific details of the camouflage patterns have little impact on this effect. If one has to move, camouflage cannot impede detection; but if one is surrounded by similar targets (e.g. other animals in a herd, or moving background distractors), then camouflage can slow identification. Despite previous assumptions, motion does not entirely 'break' camouflage.

  4. CERN Pension Fund move

    HR Department

    2007-01-01

    The CERN Pension Fund has moved to new offices at the 5th floor of Building 5. The Benefits Service of the Fund will henceforth receive you in the offices: 5-5-017 - 5-5-021 - 5-5-023. We remind you that the office hours are: Tuesday/Wednesday/Thursday from 10 am to 12 am and from 3 pm to 5 pm. The Fund would like to take this opportunity to warmly thank all the persons involved in the Removal.

  5. Moving related to separation : who moves and to what distance

    Mulder, Clara H.; Malmberg, Gunnar

    We address the issue of moving from the joint home on the occasion of separation. Our research question is: To what extent can the occurrence of moves related to separation, and the distance moved, be explained by ties to the location, resources, and other factors influencing the likelihood of

  6. Ready, set, move!

    Anaïs Schaeffer

    2012-01-01

    This year, the CERN Medical Service is launching a new public health campaign. Advertised by the catchphrase “Move! & Eat Better”, the particular aim of the campaign is to encourage people at CERN to take more regular exercise, of whatever kind.   The CERN annual relay race is scheduled on 24 May this year. The CERN Medical Service will officially launch its “Move! & Eat Better” campaign at this popular sporting event. “We shall be on hand on the day of the race to strongly advocate regular physical activity,” explains Rachid Belkheir, one of the Medical Service doctors. "We really want to pitch our campaign and answer any questions people may have. Above all we want to set an example. So we are going to walk the same circuit as the runners to underline to people that they can easily incorporate movement into their daily routine.” An underlying concern has prompted this campaign: during their first few year...

  7. Slow light in moving media

    Leonhardt, U.; Piwnicki, P.

    2001-06-01

    We review the theory of light propagation in moving media with extremely low group velocity. We intend to clarify the most elementary features of monochromatic slow light in a moving medium and, whenever possible, to give an instructive simplified picture.

  8. "Our federalism" moves indoors.

    Ruger, Theodore W

    2013-04-01

    A great deal of the US Supreme Court's federalism jurisprudence over the past two decades has focused on the outer limits of federal power, suggesting a mutually exclusive division of jurisdiction between the states and the federal government, where subjects are regulated by one sovereign or the other but not both. This is not an accurate picture of American governance as it has operated over the past half century - most important areas of American life are regulated concurrently by both the federal government and the states. The Supreme Court's June 2012 decision clearing the way for the Patient Protection and Affordable Care Act (PPACA) to move forward thus should not be regarded as an affront to state sovereignty but as a realistic embrace of state power in its active, modern form. The PPACA is infused with multiple major roles for the states, and as the statute goes into operation over the next few years, states retain, and are already exercising, substantial policy discretion.

  9. Moving Spatial Keyword Queries

    Wu, Dingming; Yiu, Man Lung; Jensen, Christian S.

    2013-01-01

    propose two algorithms for computing safe zones that guarantee correct results at any time and that aim to optimize the server-side computation as well as the communication between the server and the client. We exploit tight and conservative approximations of safe zones and aggressive computational space...... text data. State-of-the-art solutions for moving queries employ safe zones that guarantee the validity of reported results as long as the user remains within the safe zone associated with a result. However, existing safe-zone methods focus solely on spatial locations and ignore text relevancy. We...... pruning. We present techniques that aim to compute the next safe zone efficiently, and we present two types of conservative safe zones that aim to reduce the communication cost. Empirical studies with real data suggest that the proposals are efficient. To understand the effectiveness of the proposed safe...

  10. Move! Eat better: news

    2013-01-01

    Are you curious to know whether you’re doing enough daily exercise…? Test yourself with a pedometer!   Through the Move! Eat better campaign, launched in May 2012, the CERN medical service is aiming to improve the health of members of the personnel by encouraging them to prioritise physical activity in conjunction with a balanced diet. Various successful activities have already taken place: relay race/Nordic walk, Bike2work, Zumba and fitness workshops, two conferences (“Physical activity for health” and “Good nutrition every day”), events in the restaurants, as well as posters and a website. Although everyone has got the message from our various communications that physical activity is good for your health, there is still a relevant question being asked: “What is the minimum amount of exercise recommended?” 10,000 steps per day is the ideal figure, which has been demonstrated as beneficial by scientific studies ...

  11. What moves us?

    2015-01-01

    Katalog til udstillingen på Museum Jorn - What moves us? Le Corbusier & Asger Jorn - 12. sept. - 13. dec. 2015. Kataloget undersøger Le Corbusiers skifte fra en rationelt funderet tilgang til arkitekturen til en poetisk, materialistisk tilgang i efterkrigstiden. Den viser hans indflydelse på den...... yngre Asger Jorn og beskriver danskerens første beundring, som sidenhen forvandledes til skarp kritik. Kataloget, som er rigt illustreret med billeder af Le Corbusiers og Asger Jorns kunst og arkitektur, indeholder også genoptryk af originale tekster, samt bidrag i ord og billeder fra fremtrædende...... eksperter. Kataloget indeholder en række artikler af internationale skribenter under flg. overskrifter: Le Corbusier - kunstnerarkitekten i efterkrigstidens Europa Le Corbusier og Asger Jorn - David mod Goliat Gensyn med Le Corbusier - spor i dansk arkitektur og byrum...

  12. Mechanics of moving materials

    Banichuk, Nikolay; Neittaanmäki, Pekka; Saksa, Tytti; Tuovinen, Tero

    2014-01-01

    This book deals with theoretical aspects of modelling the mechanical behaviour of manufacturing, processing, transportation or other systems in which the processed or supporting material is travelling through the system. Examples of such applications include paper making, transmission cables, band saws, printing presses, manufacturing of plastic films and sheets, and extrusion of aluminium foil, textiles and other materials.   The work focuses on out-of-plane dynamics and stability analysis for isotropic and orthotropic travelling elastic and viscoelastic materials, with and without fluid-structure interaction, using analytical and semi-analytical approaches.  Also topics such as fracturing and fatigue are discussed in the context of moving materials. The last part of the book deals with optimization problems involving physical constraints arising from the stability and fatigue analyses, including uncertainties in the parameters.   The book is intended for researchers and specialists in the field, providin...

  13. Moving In, Moving Through, and Moving Out: The Transitional Experiences of Foster Youth College Students

    Gamez, Sara I.

    2017-01-01

    The purpose of this qualitative study was to explore the transitional experiences of foster youth college students. The study explored how foster youth experienced moving into, moving through, and moving out of the college environment and what resources and strategies they used to thrive during their college transitions. In addition, this study…

  14. Role of moving planes and moving spheres following Dupin cyclides

    Jia, Xiaohong

    2014-03-01

    We provide explicit representations of three moving planes that form a μ-basis for a standard Dupin cyclide. We also show how to compute μ-bases for Dupin cyclides in general position and orientation from their implicit equations. In addition, we describe the role of moving planes and moving spheres in bridging between the implicit and rational parametric representations of these cyclides. © 2014 Elsevier B.V.

  15. Role of moving planes and moving spheres following Dupin cyclides

    Jia, Xiaohong

    2014-01-01

    We provide explicit representations of three moving planes that form a μ-basis for a standard Dupin cyclide. We also show how to compute μ-bases for Dupin cyclides in general position and orientation from their implicit equations. In addition, we describe the role of moving planes and moving spheres in bridging between the implicit and rational parametric representations of these cyclides. © 2014 Elsevier B.V.

  16. Arabidopsis Microtubule-Associated Protein MAP65-3 Cross-Links Antiparallel Microtubules toward Their Plus Ends in the Phragmoplast via Its Distinct C-Terminal Microtubule Binding Domain[W

    Ho, Chin-Min Kimmy; Lee, Yuh-Ru Julie; Kiyama, Lindsay D.; Dinesh-Kumar, Savithramma P.; Liu, Bo

    2012-01-01

    Plant cytokinesis is brought about by the phragmoplast, which contains an antiparallel microtubule (MT) array. The MT-associated protein MAP65-3 acts as an MT-bundling factor that specifically cross-links antiparallel MTs near their plus ends. MAP65 family proteins contain an N-terminal dimerization domain and C-terminal MT interaction domain. Compared with other MAP65 isoforms, MAP65-3 contains an extended C terminus. A MT binding site was discovered in the region between amino acids 496 and 588 and found to be essential for the organization of phragmoplast MTs. The frequent cytokinetic failure caused by loss of MAP65-3 was not rescued by ectopic expression of MAP65-1 under the control of the MAP65-3 promoter, indicating nonoverlapping functions between the two isoforms. In the presence of MAP65-3, however, ectopic MAP65-1 appeared in the phragmoplast midline. We show that MAP65-1 could acquire the function of MAP65-3 when the C terminus of MAP65-3, which contains the MT binding site, was grafted to it. Our results also show that MAP65-1 and MAP65-3 may share redundant functions in MT stabilization. Such a stabilization effect was likely brought about by MT binding and bundling. We conclude that MAP65-3 contains a distinct C-terminal MT binding site with a specific role in cross-linking antiparallel MTs toward their plus ends in the phragmoplast. PMID:22570443

  17. Move and eat better

    2012-01-01

    CERN has many traditions, but in a week that’s seen the launch of the Medical Service’s  ‘Move & eat better’ campaign, it’s refreshing to note that among the oldest is a sporting one.  The CERN relay race dates back to 15 October 1971 when 21 pioneering teams set off to pound the pavements of CERN. Back then, the Focus users group came in first with a time of 12 minutes and 42 seconds. Today’s route is slightly different, and the number of teams has risen to over 100, with a new category of Nordic Walking introduced, as part of the campaign, for the first time.   The relay has provided some memorable events, and perhaps one of the longest-standing records in the history of sport, with the UA1 strollers’ 10 minutes and 13 seconds unbeaten for thirty years. In the women’s category, the UN Gazelles set the fastest time of 13 minutes and 16 seconds in 1996, while in the veterans category, you wi...

  18. ATLAS starts moving in

    Della Mussia, S

    2004-01-01

    The first large active detector component was lowered into the ATLAS cavern on 1st March. It consisted of the 8 modules forming the lower part of the central barrel of the tile hadronic calorimeter. The work of assembling the barrel, which comprises 64 modules, started the following day. Two road trailers each with 64 wheels, positioned side by side. This was the solution chosen to transport the lower part of the central barrel of ATLAS' tile hadronic calorimeter from Building 185 to the PX16 shaft at Point 1 (see Figure 1). The transportation, and then the installation of the component in the experimental cavern, which took place over three days were, to say the least, rather spectacular. On 25 February, the component, consisting of eight 6-metre modules, was loaded on to the trailers. The segment of the barrel was transported on a steel support so that it wouldn't move an inch during the journey. On 26 February, once all the necessary safety checks had been carried out, the convoy was able to leave Buildi...

  19. Adaptive method of lines

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  20. Consumer protection : Federal actions are needed to improve oversight of the household goods moving industry : report to congressional committees

    2001-03-01

    The ICC Termination Act of 1995 transferred federal responsibilities for protecting consumers who move their household goods across state lines using commercial moving companies to the Department of Transportation. A 1998 congressional hearing brough...

  1. 29 CFR 779.242 - Goods that “have been moved in” commerce.

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Goods that âhave been moved inâ commerce. 779.242 Section... Commerce by Any Person § 779.242 Goods that “have been moved in” commerce. For the purpose of section 3(s), goods will be considered to “have been moved * * * in commerce” when they have moved across State lines...

  2. Indexing of Network-Constrained Moving Objects

    Pfoser, Dieter; Jensen, Christian Søndergaard

    2003-01-01

    With the proliferation of mobile computing, the ability to index efficiently the movements of mobile objects becomes important. Objects are typically seen as moving in two-dimensional (x,y) space, which means that their movements across time may be embedded in the three-dimensional (x,y,t) space....... Further, the movements are typically represented as trajectories, sequences of connected line segments. In certain cases, movement is restricted, and specifically in this paper, we aim at exploiting that movements occur in transportation networks to reduce the dimensionality of the data. Briefly, the idea...

  3. Superfluid compressibility and the inertial mass of a moving singularity

    Duan, J.

    1993-01-01

    The concept of finite compressibility of a Fermi superfluid is used to reconsider the problem of inertial mass of vortex lines in both neutral and charged superfluids at T=0. For the charged case, in contrast to previous works where perfect screening was assumed, we take proper account of electromagnetic screening and solve the bulk charge distribution caused by a moving vortex line. A similar problem for a superconducting thin film is also considered

  4. SAF line analytical chemistry system

    Gerber, E.W.; Sherrell, D.L.

    1983-10-01

    An analytical chemistry system dedicated to supporting the Secure Automated Fabrication (SAF) line is discussed. Several analyses are required prior to the fuel pellets being loaded into cladding tubes to assure certification requirements will be met. These analyses, which will take less than 15 minutes, are described. The automated sample transport system which will be used to move pellets from the fabriction line to the chemistry area is also described

  5. Minimum Delay Moving Object Detection

    Lao, Dong

    2017-11-09

    We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

  6. Imaging of Moving Ground Vehicles

    Rihaczek, A

    1996-01-01

    ... requires that use be made of the complex image. The yaw/pitch/roll/bounce/flex motion of a moving ground vehicle demands that different motion compensations be applied to different parts of the vehicle...

  7. Nordic Seniors on the Move

    ”I believe that all people need to move about. Actually, some have difficulties in doing so. They stay in their home neighbourhoods where they’ve grown up and feel safe. I can understand that, but my wife and I, we didn’t want that. We are more open to new ideas.” This anthology is about seniors...... on the move. In seven chapters, Nordic researchers from various disciplines, by means of ethnographic methods, attempt to comprehend the phenomenon of Nordic seniors who move to leisure areas in their own or in other countries. The number of people involved in this kind of migratory movement has grown...... above gives voice to one of these seniors, stressing the necessity of moving. The anthology contributes to the international body of literature about later life migration, specifically representing experiences made by Nordic seniors. As shown here, mobility and migration in later life have implications...

  8. Minimum Delay Moving Object Detection

    Lao, Dong

    2017-01-08

    We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

  9. Minimum Delay Moving Object Detection

    Lao, Dong; Sundaramoorthi, Ganesh

    2017-01-01

    We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

  10. Autowaves in moving excitable media

    V.A.Davydov

    2004-01-01

    Full Text Available Within the framework of kinematic theory of autowaves we suggest a method for analytic description of stationary autowave structures appearing at the boundary between the moving and fixed excitable media. The front breakdown phenomenon is predicted for such structures. Autowave refraction and, particulary, one-side "total reflection" at the boundary is considered. The obtained analytical results are confirmed by computer simulations. Prospects of the proposed method for further studies of autowave dynamics in the moving excitable media are discussed.

  11. Infinite games with uncertain moves

    Nicholas Asher

    2013-03-01

    Full Text Available We study infinite two-player games where one of the players is unsure about the set of moves available to the other player. In particular, the set of moves of the other player is a strict superset of what she assumes it to be. We explore what happens to sets in various levels of the Borel hierarchy under such a situation. We show that the sets at every alternate level of the hierarchy jump to the next higher level.

  12. Droplets move over viscoelastic substrates by surfing a ridge

    Karpitschka, S.; Das, S.; van Gorcum, M.; Perrin, H.; Andreotti, B.; Snoeijer, J.H.

    2015-01-01

    Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a

  13. Moving event and moving participant in aspectual conceptions

    Izutsu Katsunobu

    2016-06-01

    Full Text Available This study advances an analysis of the event conception of aspectual forms in four East Asian languages: Ainu, Japanese, Korean, and Ryukyuan. As earlier studies point out, event conceptions can be divided into two major types: the moving-event type and the moving-participant type, respectively. All aspectual forms in Ainu and Korean, and most forms in Japanese and Ryukyuan are based on that type of event conception. Moving-participant oriented Ainu and movingevent oriented Japanese occupy two extremes, between which Korean and Ryukyuan stand. Notwithstanding the geographical relationships among the four languages, Ryukyuan is closer to Ainu than to Korean, whereas Korean is closer to Ainu than to Japanese.

  14. Folding control in cyclic peptides through N-methylation pattern selection: formation of antiparallel beta-sheet dimers, double reverse turns and supramolecular helices by 3alpha,gamma cyclic peptides.

    Amorín, Manuel; Castedo, Luis; Granja, Juan R

    2008-01-01

    Peptide foldamers constitute a growing class of nanomaterials with potential applications in a wide variety of chemical, medical and technological fields. Here we describe the preparation and structural characteristics of a new class of cyclic peptide foldamers (3alpha,gamma-CPs) that, depending on their backbone N-methylation patterns and the medium, can either remain as flat rings that dimerize through arrays of hydrogen bonds of antiparallel beta-sheet type, or can fold into twisted double reverse turns that, in the case of double gamma-turns, associate in nonpolar solvents to form helical supramolecular structures. A 3alpha,gamma-CP consists of a number of multiples of a repeat unit made up of four amino acid residues of alternating chirality: three corresponding to alpha-amino acids and one to a gamma-amino acid (a cis-3-aminocycloalkanecarboxylic acid).

  15. Solid-State-NMR-Structure-Based Inhibitor Design to Achieve Selective Inhibition of the Parallel-in-Register β-Sheet versus Antiparallel Iowa Mutant β-Amyloid Fibrils.

    Cheng, Qinghui; Qiang, Wei

    2017-06-08

    Solid-state nuclear magnetic resonance (ssNMR) spectroscopy has been widely applied to characterize the high-resolution structures of β-amyloid (Aβ) fibrils. While these structures provide crucial molecular insights on the deposition of amyloid plaques in Alzheimer's diseases (AD), ssNMR structures have been rarely used so far as the basis for designing inhibitors. It remains a challenge because the ssNMR-based Aβ fibril structures were usually obtained with sparsely isotope-labeled peptides with limited experimental constraints, where the structural models, especially the side-chain coordinates, showed restricted precision. However, these structural models often possess a higher accuracy within the hydrophobic core regions with more well-defined experimental data, which provide potential targets for the molecular design. This work presents an ssNMR-based molecular design to achieve selective inhibition of a particular type of Aβ fibrillar structure, which was formed with the Iowa mutant of Aβ with parallel-in-register β-sheet hydrophobic core. The results show that short peptides that mimic the C-terminal β-strands of the fibril may have a preference in binding to the parallel Aβ fibrils rather than the antiparallel fibrils, mainly due to the differences in the high-resolution structures in the fibril elongation interfaces. The Iowa mutant Aβ fibrils are utilized in this work mainly as a model to demonstrate the feasibility of the strategy because it is relatively straightforward to distinguish the parallel and antiparallel fibril structures using ssNMR. Our results suggest that it is potentially feasible to design structure-selective inhibitors and/or diagnostic agents to Aβ fibrils using ssNMR-based structural models.

  16. Minimum Delay Moving Object Detection

    Lao, Dong

    2017-05-14

    This thesis presents a general framework and method for detection of an object in a video based on apparent motion. The object moves, at some unknown time, differently than the “background” motion, which can be induced from camera motion. The goal of proposed method is to detect and segment the object as soon it moves in an online manner. Since motion estimation can be unreliable between frames, more than two frames are needed to reliably detect the object. Observing more frames before declaring a detection may lead to a more accurate detection and segmentation, since more motion may be observed leading to a stronger motion cue. However, this leads to greater delay. The proposed method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms, defined as declarations of detection before the object moves or incorrect or inaccurate segmentation at the detection time. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

  17. Moving Horizon Estimation and Control

    Jørgensen, John Bagterp

    successful and applied methodology beyond PID-control for control of industrial processes. The main contribution of this thesis is introduction and definition of the extended linear quadratic optimal control problem for solution of numerical problems arising in moving horizon estimation and control...... problems. Chapter 1 motivates moving horizon estimation and control as a paradigm for control of industrial processes. It introduces the extended linear quadratic control problem and discusses its central role in moving horizon estimation and control. Introduction, application and efficient solution....... It provides an algorithm for computation of the maximal output admissible set for linear model predictive control. Appendix D provides results concerning linear regression. Appendix E discuss prediction error methods for identification of linear models tailored for model predictive control....

  18. Automatic Moving Object Segmentation for Freely Moving Cameras

    Yanli Wan

    2014-01-01

    Full Text Available This paper proposes a new moving object segmentation algorithm for freely moving cameras which is very common for the outdoor surveillance system, the car build-in surveillance system, and the robot navigation system. A two-layer based affine transformation model optimization method is proposed for camera compensation purpose, where the outer layer iteration is used to filter the non-background feature points, and the inner layer iteration is used to estimate a refined affine model based on the RANSAC method. Then the feature points are classified into foreground and background according to the detected motion information. A geodesic based graph cut algorithm is then employed to extract the moving foreground based on the classified features. Unlike the existing global optimization or the long term feature point tracking based method, our algorithm only performs on two successive frames to segment the moving foreground, which makes it suitable for the online video processing applications. The experiment results demonstrate the effectiveness of our algorithm in both of the high accuracy and the fast speed.

  19. Lithium in the Hyades, the Hyades moving group, and Praesepe

    Boesgaard, A.M.; Budge, K.G.

    1988-01-01

    High-resolution spectra of 35 F main-sequence stars have been obtained at high SNRs in the region of the Li I resonance line at 6708 A. Fourteen of the stars are members of the Hyades, six are members of Praesepe, and the remaining 15 stars are members of the Hyades Moving Group. Equivalent widths of the Li resonance line and of Fe lines in the same spectral region were measured and Li and Fe abundances were calculated from spectral synthesis using Kurucz model atmospheres. A mean metallicity of (Fe/H) = + 0.17 + or - 0.06 for the Hyades, + 0.13 + or - 0.07 for Praesepe, and + 0.11 + or - 0.09 for the Hyades Moving Group is obtained. The Li abundance patterns are consistent with those found previously for the Hyades stars and for the Praesepe stars, but some of the Hyades Moving Group members do not fit this Li-temperature profile well. The possibility exists that the Hyades Moving Group is not coeval and that its members have little in common other than kinematics. 29 references

  20. Contact Line Dynamics

    Kreiss, Gunilla; Holmgren, Hanna; Kronbichler, Martin; Ge, Anthony; Brant, Luca

    2017-11-01

    The conventional no-slip boundary condition leads to a non-integrable stress singularity at a moving contact line. This makes numerical simulations of two-phase flow challenging, especially when capillarity of the contact point is essential for the dynamics of the flow. We will describe a modeling methodology, which is suitable for numerical simulations, and present results from numerical computations. The methodology is based on combining a relation between the apparent contact angle and the contact line velocity, with the similarity solution for Stokes flow at a planar interface. The relation between angle and velocity can be determined by theoretical arguments, or from simulations using a more detailed model. In our approach we have used results from phase field simulations in a small domain, but using a molecular dynamics model should also be possible. In both cases more physics is included and the stress singularity is removed.

  1. A Cryptographic Moving-Knife Cake-Cutting Protocol

    Yoshifumi Manabe

    2012-02-01

    Full Text Available This paper proposes a cake-cutting protocol using cryptography when the cake is a heterogeneous good that is represented by an interval on a real line. Although the Dubins-Spanier moving-knife protocol with one knife achieves simple fairness, all players must execute the protocol synchronously. Thus, the protocol cannot be executed on asynchronous networks such as the Internet. We show that the moving-knife protocol can be executed asynchronously by a discrete protocol using a secure auction protocol. The number of cuts is n-1 where n is the number of players, which is the minimum.

  2. Carlson Wagonlit Travel is moving

    2013-01-01

    The renovation of the Main Building continues!   Because of this, Carlson Wagonlit Travel will move from building 62 to building 510 on 4 October and the agency will be closed in the afternoon. An emergency service will be organised for official travels only. Phone: 022 799 75 73 & 022 799 75 78 / e-mail: cern@carlsonwagonlit.ch

  3. Minimum Delay Moving Object Detection

    Lao, Dong

    2017-01-01

    This thesis presents a general framework and method for detection of an object in a video based on apparent motion. The object moves, at some unknown time, differently than the “background” motion, which can be induced from camera motion. The goal

  4. Congestion and residential moving behaviour

    Larsen, Morten Marott; Pilegaard, Ninette; Van Ommeren, Jos

    2008-01-01

    to congestion. We focus on the equilibrium in which some workers currently living in one region accept jobs in the other, with a fraction of them choosing to commute from their current residence to the new job in the other region and the remainder choosing to move to the region in which the new job is located...

  5. Minimum Delay Moving Object Detection

    Lao, Dong; Sundaramoorthi, Ganesh

    2017-01-01

    We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon

  6. High Line

    Kiib, Hans

    2015-01-01

    At just over 10 meters above street level, the High Line extends three kilometers through three districts of Southwestern Manhattan in New York. It consists of simple steel construction, and previously served as an elevated rail line connection between Penn Station on 34th Street and the many....... The High Line project has been carried out as part of an open conversion strategy. The result is a remarkable urban architectural project, which works as a catalyst for the urban development of Western Manhattan. The greater project includes the restoration and reuse of many old industrial buildings...

  7. World lines.

    Waser Jürgen; Fuchs Raphael; Ribicic Hrvoje; Schindler Benjamin; Blöschl Günther; Gröller Eduard

    2010-01-01

    In this paper we present World Lines as a novel interactive visualization that provides complete control over multiple heterogeneous simulation runs. In many application areas decisions can only be made by exploring alternative scenarios. The goal of the suggested approach is to support users in this decision making process. In this setting the data domain is extended to a set of alternative worlds where only one outcome will actually happen. World Lines integrate simulation visualization and...

  8. Moving Manifolds in Electromagnetic Fields

    David V. Svintradze

    2017-08-01

    Full Text Available We propose dynamic non-linear equations for moving surfaces in an electromagnetic field. The field is induced by a material body with a boundary of the surface. Correspondingly the potential energy, set by the field at the boundary can be written as an addition of four-potential times four-current to a contraction of the electromagnetic tensor. Proper application of the minimal action principle to the system Lagrangian yields dynamic non-linear equations for moving three dimensional manifolds in electromagnetic fields. The equations in different conditions simplify to Maxwell equations for massless three surfaces, to Euler equations for a dynamic fluid, to magneto-hydrodynamic equations and to the Poisson-Boltzmann equation.

  9. Stand up and move forward

    de Jong, Johan; Shokoohi, Roya

    2017-01-01

    Insufficient physical activity or being inactive is one of the leading risk factors for non-communicable diseases worldwide. Globally between 6-10% of premature mortality, caused by non-communicable diseases, could be avoided if people adhered to general physical activity guidelines. Besides that, studies link sitting for prolonged periods of time with many serious health concerns. The solution seems simple: Stand up and move forward. However, human behavior is difficult to change – due to th...

  10. Autoregressive Moving Average Graph Filtering

    Isufi, Elvin; Loukas, Andreas; Simonetto, Andrea; Leus, Geert

    2016-01-01

    One of the cornerstones of the field of signal processing on graphs are graph filters, direct analogues of classical filters, but intended for signals defined on graphs. This work brings forth new insights on the distributed graph filtering problem. We design a family of autoregressive moving average (ARMA) recursions, which (i) are able to approximate any desired graph frequency response, and (ii) give exact solutions for tasks such as graph signal denoising and interpolation. The design phi...

  11. Silver linings.

    Bultas, Margaret W; Pohlman, Shawn

    2014-01-01

    The purpose of this interpretive phenomenological study was to gain a better understanding of the experiences of 11 mothers of preschool children with autism spectrum disorder (ASD). Mothers were interviewed three times over a 6 week period. Interviews were analyzed using interpretive methods. This manuscript highlights one particular theme-a positive perspective mothers described as the "silver lining." This "silver lining" represents optimism despite the adversities associated with parenting a child with ASD. A deeper understanding of this side of mothering children with ASD may help health care providers improve rapport, communication, and result in more authentic family centered care. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Detection of Moving Targets Using Soliton Resonance Effect

    Kulikov, Igor K.; Zak, Michail

    2013-01-01

    The objective of this research was to develop a fundamentally new method for detecting hidden moving targets within noisy and cluttered data-streams using a novel "soliton resonance" effect in nonlinear dynamical systems. The technique uses an inhomogeneous Korteweg de Vries (KdV) equation containing moving-target information. Solution of the KdV equation will describe a soliton propagating with the same kinematic characteristics as the target. The approach uses the time-dependent data stream obtained with a sensor in form of the "forcing function," which is incorporated in an inhomogeneous KdV equation. When a hidden moving target (which in many ways resembles a soliton) encounters the natural "probe" soliton solution of the KdV equation, a strong resonance phenomenon results that makes the location and motion of the target apparent. Soliton resonance method will amplify the moving target signal, suppressing the noise. The method will be a very effective tool for locating and identifying diverse, highly dynamic targets with ill-defined characteristics in a noisy environment. The soliton resonance method for the detection of moving targets was developed in one and two dimensions. Computer simulations proved that the method could be used for detection of singe point-like targets moving with constant velocities and accelerations in 1D and along straight lines or curved trajectories in 2D. The method also allows estimation of the kinematic characteristics of moving targets, and reconstruction of target trajectories in 2D. The method could be very effective for target detection in the presence of clutter and for the case of target obscurations.

  13. Difference in the structures of alanine tri- and tetra-peptides with antiparallel β-sheet assessed by X-ray diffraction, solid-state NMR and chemical shift calculations by GIPAW.

    Asakura, Tetsuo; Yazawa, Koji; Horiguchi, Kumiko; Suzuki, Furitsu; Nishiyama, Yusuke; Nishimura, Katsuyuki; Kaji, Hironori

    2014-01-01

    Alanine oligomers provide a key structure for silk fibers from spider and wild silkworms.We report on structural analysis of L-alanyl-L-alanyl-L-alanyl-L-alanine (Ala)4 with anti-parallel (AP) β-structures using X-ray and solid-state NMR. All of the Ala residues in the (Ala)4 are in equivalent positions, whereas for alanine trimer (Ala)3 there are two alternative locations in a unit cell as reported previously (Fawcett and Camerman, Acta Cryst., 1975, 31, 658-665). (Ala)4 with AP β-structure is more stable than AP-(Ala)3 due to formation of the stronger hydrogen bonds. The intermolecular structure of (Ala)4 is also different from polyalanine fiber structure, indicating that the interchain arrangement of AP β-structure changes with increasing alanine sequencelength. Furthermore the precise (1)H positions, which are usually inaccesible by X-ray diffraction method, are determined by high resolution (1)H solid state NMR combined with the chemical shift calculations by the gauge-including projector augmented wave method. Copyright © 2013 Wiley Periodicals, Inc.

  14. Moving walls and geometric phases

    Facchi, Paolo, E-mail: paolo.facchi@ba.infn.it [Dipartimento di Fisica and MECENAS, Università di Bari, I-70126 Bari (Italy); INFN, Sezione di Bari, I-70126 Bari (Italy); Garnero, Giancarlo, E-mail: giancarlo.garnero@uniba.it [Dipartimento di Fisica and MECENAS, Università di Bari, I-70126 Bari (Italy); INFN, Sezione di Bari, I-70126 Bari (Italy); Marmo, Giuseppe [Dipartimento di Scienze Fisiche and MECENAS, Università di Napoli “Federico II”, I-80126 Napoli (Italy); INFN, Sezione di Napoli, I-80126 Napoli (Italy); Samuel, Joseph [Raman Research Institute, 560080 Bangalore (India)

    2016-09-15

    We unveil the existence of a non-trivial Berry phase associated to the dynamics of a quantum particle in a one dimensional box with moving walls. It is shown that a suitable choice of boundary conditions has to be made in order to preserve unitarity. For these boundary conditions we compute explicitly the geometric phase two-form on the parameter space. The unboundedness of the Hamiltonian describing the system leads to a natural prescription of renormalization for divergent contributions arising from the boundary.

  15. Moving Tourism Social Entrepreneurship Forward

    Sheldon, Pauline; Dredge, Dianne; Daniele, Roberto

    2017-01-01

    This chapter concludes the book by considering the role that research and education can play to move the TSE agenda forward. In addition to consolidating the chapter authors’ thoughts about the future of SE and tourism, it also lays out some directions for research tracks in the future....... It considers the changes needed in research approaches, in our universities, our curricula, our learners, and ourselves as academics. These changes we hope will stimulate the dialog on how TSE can mobilize the energy, vision and social spirit of those who seek to change the world for the better through tourism....

  16. Dark matter. A light move

    Redondo, Javier [Muenchen Univ. (Germany). Arnold Sommerfeld Center; Max-Planck-Institut fuer Physik, Muenchen (Germany); Doebrich, Babette [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2013-11-15

    This proceedings contribution reports from the workshop Dark Matter - a light move, held at DESY in Hamburg in June 2013. Dark Matter particle candidates span a huge parameter range. In particular, well motivated candidates exist also in the sub-eV mass region, for example the axion. Whilst a plethora of searches for rather heavy Dark Matter particles exists, there are only very few experiments aimed at direct detection of sub-eV Dark Matter to this date. The aim of our workshop was to discuss if and how this could be changed in the near future.

  17. Live histograms in moving windows

    Zhil'tsov, V.E.

    1989-01-01

    Application of computer graphics for specific hardware testing is discussed. The hardware is position sensitive detector (multiwire proportional chamber) which is used in high energy physics experiments, and real-out electronics for it. Testing program is described (XPERT), which utilises multi-window user interface. Data are represented as histograms in windows. The windows on the screen may be moved, reordered, their sizes may be changed. Histograms may be put to any window, and hardcopy may be made. Some program internals are discussed. The computer environment is quite simple: MS-DOS IBM PC/XT, 256 KB RAM, CGA, 5.25'' FD, Epson MX. 4 refs.; 7 figs

  18. Dark matter. A light move

    Redondo, Javier; Doebrich, Babette

    2013-11-01

    This proceedings contribution reports from the workshop Dark Matter - a light move, held at DESY in Hamburg in June 2013. Dark Matter particle candidates span a huge parameter range. In particular, well motivated candidates exist also in the sub-eV mass region, for example the axion. Whilst a plethora of searches for rather heavy Dark Matter particles exists, there are only very few experiments aimed at direct detection of sub-eV Dark Matter to this date. The aim of our workshop was to discuss if and how this could be changed in the near future.

  19. Autonomous Landing on Moving Platforms

    Mendoza Chavez, Gilberto

    2016-08-01

    This thesis investigates autonomous landing of a micro air vehicle (MAV) on a nonstationary ground platform. Unmanned aerial vehicles (UAVs) and micro air vehicles (MAVs) are becoming every day more ubiquitous. Nonetheless, many applications still require specialized human pilots or supervisors. Current research is focusing on augmenting the scope of tasks that these vehicles are able to accomplish autonomously. Precise autonomous landing on moving platforms is essential for self-deployment and recovery of MAVs, but it remains a challenging task for both autonomous and piloted vehicles. Model Predictive Control (MPC) is a widely used and effective scheme to control constrained systems. One of its variants, output-feedback tube-based MPC, ensures robust stability for systems with bounded disturbances under system state reconstruction. This thesis proposes a MAV control strategy based on this variant of MPC to perform rapid and precise autonomous landing on moving targets whose nominal (uncommitted) trajectory and velocity are slowly varying. The proposed approach is demonstrated on an experimental setup.

  20. Moving as an interspecies unit

    Mondeme, Chloé

    In urban spaces, people are normatively expected to move, to be mobile. In such “evolving ecologies” (Haddington, Nevile and Mondada, 2013), pedestrians, cyclists, and car-drivers are constantly adjusting to one another's mobility. Stillness, conversely, is noticed and somehow disruptive (Hadding......In urban spaces, people are normatively expected to move, to be mobile. In such “evolving ecologies” (Haddington, Nevile and Mondada, 2013), pedestrians, cyclists, and car-drivers are constantly adjusting to one another's mobility. Stillness, conversely, is noticed and somehow disruptive...... (Haddington, 2012 ; Lan Hing Ting & al., 2013). Staying immobile, for instance just before crossing a street, is in that respect a non-dynamic action yet to account for. Will the projected next action of the still participant be to wait and stay for a while, or to cross the street? To put is in other words......, how can immobility be unproblematically bound to a waiting status? What are the embodied resources used to be ‘doing wainting’ (Ayass, 2015)? In this presentation we will look at a collection of street crossings accomplished by blind persons with their guide-dogs. In the absence of visual access...

  1. Reasons for Moving in Nonmetro Iowa

    Burke, Sandra Charvat; Edelman, Mark

    2007-01-01

    This study highlights the experiences of people who have recently moved to or from 19 selected nonmetropolitan counties of Iowa. This report highlights work, family, community, and housing reasons for moving. The purpose is to increase understanding about why people move so community leaders and citizens can develop actionable strategies for attracting and retaining population.

  2. Modification of the U-line of the RHIC injection line

    Xu, Jianming.

    1991-09-01

    The parameters of the U-line of the RHIC injection line with low β waist are described. In that lattice, the location of SA is not dispersion free and 14 quadrupoles are needed. This line has been modified to move SA to a dispersion free region (after the 8-degree bend), the length and maximum gradient of quadrupoles have been adjusted to fit the existing quadrupole parameters and the number of quadrupoles is reduced to 12. 2 refs., 3 tabs

  3. Prototype moving-ring reactor

    Smith, A.C. Jr.; Ashworth, C.P.; Abreu, K.E.

    1982-01-01

    We have completed a design of the Prototype Moving-Ring Reactor. The fusion fuel is confined in current-carrying rings of magnetically-field-reversed plasma (Compact Toroids). The plasma rings, formed by a coaxial plasma gun, undergo adiabatic magnetic compression to ignition temperature while they are being injected into the reactor's burner section. The cylindrical burner chamber is divided into three burn stations. Separator coils and a slight axial guide field gradient are used to shuttle the ignited toroids rapidly from one burn station to the next, pausing for 1/3 of the total burn time at each station. D-T- 3 He ice pellets refuel the rings at a rate which maintains constant radiated power

  4. AHP 21: Review: Moving Mountains

    William B. Noseworthy

    2012-12-01

    Full Text Available Moving Mountains stands out among recent discussions of the Southeast Asian Highlands, drawing from twelve contributors with extensive field experience living and working in locales closed to nonCommunist academics between 1945 and 1990 (3. The authors' methodologies focus on the anthropological approach of participant observation combined with oral history. Previously, substantial research had been confined to the experience of "hill tribes" in Northern Thailand (11, unless one gained access to the massive collections of French language research under the École Française d'Extrême Orient (EFEO or the Société Asiatique (SA, both in Paris. As such, this volume's contributors are able to ring out the voices of Southeast Asian Massif populations in a way that demonstrates a mindful assembly of research, while carefully narrating a more complex view of the region than that presented by Scott's (2009:22 "zones of refuge." ...

  5. Why Make the World Move?

    Keith Evan Green

    2017-12-01

    Full Text Available The next horizons of human-computer interaction promise a whirling world of digital bytes, physical bits, and their hybrids. Are human beings prepared to inhabit such cyber-physical, adaptive environments? Assuming an optimistic view, this chapter offers a reply, drawing from art and art history, environmental design, literature, psychology, and evolutionary anthropology, to identify wide-ranging motivations for the design of such “new places” of human-computer interaction. Moreover, the author makes a plea to researchers focused in the domain of adaptive environments to pause and take a longer, more comprehensive, more self-reflective view to see what we’re doing, to recognize where we are, and to possibly find ourselves and others within our designed artifacts and systems that make the world move.

  6. Moving Forest di Expo 2015

    Michela Moretti

    2015-12-01

    Full Text Available The paper proposes a reading of the Expo 2015 landscape project through the essay "Moving Forest "by Franco Zagari and Benedetto Selleri; in which the authors trace the design process of the exposition site. It describes the design features of the green spaces that surround and mark the Exposition City. The green project is the connection between innovation, technology and rural landscape, like that surrounds the site. The Expo map represents one of the largest landscape projects in the last years in Europe, with its 300,000 square meters, organized in a sequence of different landscape that improve a gradual transition from the rural and natural landscape outside, to the urban landscape inside the exposition city.

  7. Mobility narratives that move me

    Lysgaard, Jonas Andreasen; Kronlid, David

    and fiction. By opposing the classic anthropocentric ontological split between human (discourse) and object, fiction and Reality, OOO opens up for a new understanding of the role of narratives as independent objects on the same scale as grains of sand, universities, axolotls and planets. In short...... of speed, acceleration, the rhythm of technogenic moving and mooring, which can be translated into an understanding of our own movements and moorings through life and how we engage with new things, such as mediating new information through a certain pace, rhythm, movement, acceleration, slowing down....... This fictive/Real example of a narrative object illustrates that regardless of the metaphysical status of what/who we encounter in education and throughout life, if this experience becomes meaningful to us, we are navigating around them, towards them, and enmesh with them in the same principle ways...

  8. Alpha detection on moving surfaces

    MacArthur, D.; Orr, C.; Luff, C.

    1998-01-01

    Both environmental restoration (ER) and decontamination and decommissioning (D and D) require characterization of large surface areas (walls, floors, in situ soil, soil and rubble on a conveyor belt, etc.) for radioactive contamination. Many facilities which have processed alpha active material such as plutonium or uranium require effective and efficient characterization for alpha contamination. Traditional methods for alpha surface characterization are limited by the short range and poor penetration of alpha particles. These probes are only sensitive to contamination located directly under the probe. Furthermore, the probe must be held close to the surface to be monitored in order to avoid excessive losses in the ambient air. The combination of proximity and thin detector windows can easily cause instrument damage unless extreme care is taken. The long-range alpha detection (LRAD) system addresses these problems by detecting the ions generated by alpha particles interacting with ambient air rather than the alpha particle directly. Thus, detectors based on LRAD overcome the limitations due to alpha particle range (the ions can travel many meters as opposed to the several-centimeter alpha particle range) and penetrating ability (an LRAD-based detector has no window). Unfortunately, all LRAD-based detectors described previously are static devices, i.e., these detectors cannot be used over surfaces which are continuously moving. In this paper, the authors report on the first tests of two techniques (the electrostatic ion seal and the gridded electrostatic LRAD detector) which extend the capabilities of LRAD surface monitors to use over moving surfaces. This dynamic surface monitoring system was developed jointly by Los Alamos National Laboratory and at BNFL Instruments. All testing was performed at the BNFL Instruments facility in the UK

  9. Latent heat of traffic moving from rest

    Farzad Ahmadi, S.; Berrier, Austin S.; Doty, William M.; Greer, Pat G.; Habibi, Mohammad; Morgan, Hunter A.; Waterman, Josam H. C.; Abaid, Nicole; Boreyko, Jonathan B.

    2017-11-01

    Contrary to traditional thinking and driver intuition, here we show that there is no benefit to ground vehicles increasing their packing density at stoppages. By systematically controlling the packing density of vehicles queued at a traffic light on a Smart Road, drone footage revealed that the benefit of an initial increase in displacement for close-packed vehicles is completely offset by the lag time inherent to changing back into a ‘liquid phase’ when flow resumes. This lag is analogous to the thermodynamic concept of the latent heat of fusion, as the ‘temperature’ (kinetic energy) of the vehicles cannot increase until the traffic ‘melts’ into the liquid phase. These findings suggest that in situations where gridlock is not an issue, drivers should not decrease their spacing during stoppages in order to lessen the likelihood of collisions with no loss in flow efficiency. In contrast, motion capture experiments of a line of people walking from rest showed higher flow efficiency with increased packing densities, indicating that the importance of latent heat becomes trivial for slower moving systems.

  10. production lines

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  11. Line facilities outline

    1998-08-01

    This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

  12. 3D 14N/1H Double Quantum/1H Single Quantum Correlation Solid-State NMR for Probing Parallel and Anti-Parallel Beta-Sheet Arrangement of Oligo-Peptides at Natural Abundance.

    Hong, You-Lee; Asakura, Tetsuo; Nishiyama, Yusuke

    2018-05-08

    β-sheet structure of oligo- and poly-peptides can be formed in anti-parallel (AP)- and parallel (P)-structure, which is the important feature to understand the structures. In principle, P- and AP-β-sheet structures can be identified by the presence (AP) and absence (P) of the interstrand 1HNH/1HNH correlations on a diagonal in 2D 1H double quantum (DQ)/1H single quantum (SQ) spectrum due to the different interstrand 1HNH/1HNH distances between these two arrangements. However, the 1HNH/1HNH peaks overlap to the 1HNH3+/1HNH3+ peaks, which always give cross peaks regardless of the β-sheet arrangement. The 1HNH3+/1HNH3+ peaks disturb the observation of the presence/absence of 1HNH/1HNH correlations and the assignment of 1HNH and 1HNH3+ is not always available. Here, 3D 14N/1H DQ/1H SQ correlation solid-state NMR experiments at fast magic angle spinning (70 kHz) are introduced to distinguish AP and P β-sheet structure. The 14N dimension allows the separate observation of 1HNH/1HNH peaks from 1HNH3+/1HNH3+ peaks with clear assignment of 1HNH and 1HNH3+. In addition, the high natural abundance of 1H and 14N enables 3D 14N/1H DQ/1H SQ experiments of oligo-alanines (Ala3-6) in four hours without any isotope labelling. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Method and apparatus for a combination moving bed thermal treatment reactor and moving bed filter

    Badger, Phillip C.; Dunn, Jr., Kenneth J.

    2015-09-01

    A moving bed gasification/thermal treatment reactor includes a geometry in which moving bed reactor particles serve as both a moving bed filter and a heat carrier to provide thermal energy for thermal treatment reactions, such that the moving bed filter and the heat carrier are one and the same to remove solid particulates or droplets generated by thermal treatment processes or injected into the moving bed filter from other sources.

  14. Parallel Lines

    James G. Worner

    2017-05-01

    Full Text Available James Worner is an Australian-based writer and scholar currently pursuing a PhD at the University of Technology Sydney. His research seeks to expose masculinities lost in the shadow of Australia’s Anzac hegemony while exploring new opportunities for contemporary historiography. He is the recipient of the Doctoral Scholarship in Historical Consciousness at the university’s Australian Centre of Public History and will be hosted by the University of Bologna during 2017 on a doctoral research writing scholarship.   ‘Parallel Lines’ is one of a collection of stories, The Shapes of Us, exploring liminal spaces of modern life: class, gender, sexuality, race, religion and education. It looks at lives, like lines, that do not meet but which travel in proximity, simultaneously attracted and repelled. James’ short stories have been published in various journals and anthologies.

  15. Cosmology with moving bimetric fluids

    García-García, Carlos; Maroto, Antonio L.; Martín-Moruno, Prado, E-mail: cargar08@ucm.es, E-mail: maroto@ucm.es, E-mail: pradomm@ucm.es [Departamento de Física Teórica I, Universidad Complutense de Madrid, E-28040 Madrid (Spain)

    2016-12-01

    We study cosmological implications of bigravity and massive gravity solutions with non-simultaneously diagonal metrics by considering the generalized Gordon and Kerr-Schild ansatzes. The scenario that we obtain is equivalent to that of General Relativity with additional non-comoving perfect fluids. We show that the most general ghost-free bimetric theory generates three kinds of effective fluids whose equations of state are fixed by a function of the ansatz. Different choices of such function allow to reproduce the behaviour of different dark fluids. In particular, the Gordon ansatz is suitable for the description of various kinds of slowly-moving fluids, whereas the Kerr-Schild one is shown to describe a null dark energy component. The motion of those dark fluids with respect to the CMB is shown to generate, in turn, a relative motion of baryonic matter with respect to radition which contributes to the CMB anisotropies. CMB dipole observations are able to set stringent limits on the dark sector described by the effective bimetric fluid.

  16. Computations of slowly moving shocks

    Karni, S.; Canic, S.

    1997-01-01

    Computations of slowly moving shocks by shock capturing schemes may generate oscillations are generated already by first-order schemes, but become more pronounced in higher-order schemes which seem to exhibit different behaviors: (i) the first-order upwind (UW) scheme which generates strong oscillations and (ii) the Lax-Friedrichs scheme which appears not to generate any disturbances at all. A key observation is that in the UW case, the numerical viscosity in the shock family vanishes inside the slow shock layer. Simple scaling arguments show the third-order effects on the solution may no longer be neglected. We derive the third-order modified equation for the UW scheme and regard the oscillatory solution as a traveling wave solution of the parabolic modified equation for the perturbation. We then look at the governing equation for the perturbation, which points to a plausible mechanism by which postshock oscillations are generated. It contains a third-order source term that becomes significant inside the shock layer, and a nonlinear coupling term which projects the perturbation on all characteristic fields, including those not associated with the shock family. 5 refs., 8 figs

  17. Pipelines : moving biomass and energy

    Kumar, A. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mechanical Engineering

    2006-07-01

    Moving biomass and energy through pipelines was presented. Field sourced biomass utilization for fuel was discussed in terms of competing cost factors; economies of scale; and differing fuel plant sizes. The cost versus scale in a bioenergy facility was illustrated in chart format. The transportation cost of biomass was presented as it is a major component of total biomass processing cost and is in the typical range of 25-45 per cent of total processing costs for truck transport of biomass. Issues in large scale biomass utilization, scale effects in transportation, and components of transport cost were identified. Other topics related to transportation issues included approaches to pipeline transport; cost of wood chips in pipeline transport; and distance variable cost of transporting wood chips by pipeline. Practical applications were also offered. In addition, the presentation provided and illustrated a model for an ethanol plant supplied by truck transport as well as a sample configuration for 19 truck based ethanol plants versus one large facility supplied by truck plus 18 pipelines. Last, pipeline transport of bio-oil and pipeline transport of syngas was discussed. It was concluded that pipeline transport can help in reducing congestion issues in large scale biomass utilization and that it can offer a means to achieve large plant size. Some current research at the University of Alberta on pipeline transport of raw biomass, bio-oil and hydrogen production from biomass for oil sands and pipeline transport was also presented. tabs., figs.

  18. Leadership in moving human groups.

    Margarete Boos

    2014-04-01

    Full Text Available How is movement of individuals coordinated as a group? This is a fundamental question of social behaviour, encompassing phenomena such as bird flocking, fish schooling, and the innumerable activities in human groups that require people to synchronise their actions. We have developed an experimental paradigm, the HoneyComb computer-based multi-client game, to empirically investigate human movement coordination and leadership. Using economic games as a model, we set monetary incentives to motivate players on a virtual playfield to reach goals via players' movements. We asked whether (I humans coordinate their movements when information is limited to an individual group member's observation of adjacent group member motion, (II whether an informed group minority can lead an uninformed group majority to the minority's goal, and if so, (III how this minority exerts its influence. We showed that in a human group--on the basis of movement alone--a minority can successfully lead a majority. Minorities lead successfully when (a their members choose similar initial steps towards their goal field and (b they are among the first in the whole group to make a move. Using our approach, we empirically demonstrate that the rules of swarming behaviour apply to humans. Even complex human behaviour, such as leadership and directed group movement, follow simple rules that are based on visual perception of local movement.

  19. The Telecom Lab is moving

    IT Department

    2009-01-01

    As of 2nd March 2009, the Telecom Lab will move to Building 58 R-017. The Telecom Lab is the central point for all support questions regarding CERN mobile phone services (provision of SIM cards, requests for modifications of subscriptions, diagnostics for mobile phone problems, etc.). The opening hours as well as the contact details for the Telecom Lab remain unchanged: New location: Building 58 R-017 Opening hours: Every week day, from 11 a.m. to 12 a.m. Phone number: 72480 Email address: labo.telecom@cern.ch This change has no impact on support requests for mobile services. Users can still submit their requests concerning mobile phone subscriptions using the usual EDH form (https://edh.cern.ch/Document/GSM). The automatic message sent to inform users of their SIM card availability will be updated to indicate the new Telecom Lab location. You can find all information related to CERN mobile phone services at the following link: http://cern.ch/gsm CS Section - IT/CS group

  20. Numerical Simulation of A Right-moving Storm Over France

    Chancibault, K.; Ducrocq, V.; Lafore, J.-Ph.

    A three-dimensional non-hydrostatic mesoscale model is used to simulate the right- moving storm produced through storm splitting, on 30 may 1999, over northern France. The initial state is provided by the French 3D-var ARPEGE analysis and the simuation is performed with two interactive nested domains. The aim of this study is to improve our understanding of such storm dynamics. A vor- ticity analysis has been carried out, with emphasis on stretching and tilting terms of the vertical vorticity equation, thanks to the backward trajectories. The baroclinic produc- tion and stretching terms of the horizontal vorticity equation have also been studied to understand the interaction between the horizontal vorticity and a mesoscale thermal line. Finally, the spatial and temporal variation of the Storm Relative Environmental Helicity has been examined. Most of the results compare well with previous results on right-moving storms ob- tained from theoritical or numerical studies from idealized homogeneous base state.

  1. Adaptive Moving Object Tracking Integrating Neural Networks And Intelligent Processing

    Lee, James S. J.; Nguyen, Dziem D.; Lin, C.

    1989-03-01

    A real-time adaptive scheme is introduced to detect and track moving objects under noisy, dynamic conditions including moving sensors. This approach integrates the adaptiveness and incremental learning characteristics of neural networks with intelligent reasoning and process control. Spatiotemporal filtering is used to detect and analyze motion, exploiting the speed and accuracy of multiresolution processing. A neural network algorithm constitutes the basic computational structure for classification. A recognition and learning controller guides the on-line training of the network, and invokes pattern recognition to determine processing parameters dynamically and to verify detection results. A tracking controller acts as the central control unit, so that tracking goals direct the over-all system. Performance is benchmarked against the Widrow-Hoff algorithm, for target detection scenarios presented in diverse FLIR image sequences. Efficient algorithm design ensures that this recognition and control scheme, implemented in software and commercially available image processing hardware, meets the real-time requirements of tracking applications.

  2. Vibration analysis of continuous maglev guideways with a moving distributed load model

    Teng, N G; Qiao, B P

    2008-01-01

    A model of moving distributed load with a constant speed is established for vertical vibration analysis of a continuous guideway in maglev transportation system. The guideway is considered as a continuous structural system and the action of maglev vehicles on guideways is considered as a moving distributed load. Vibration of the continuous guideways used in Shanghai maglev line is analyzed with this model. The factors that affect the vibration of the guideways, such as speeds, guideway's spans, frequency and damping, are discussed

  3. Inspecting rapidly moving surfaces for small defects using CNN cameras

    Blug, Andreas; Carl, Daniel; Höfler, Heinrich

    2013-04-01

    A continuous increase in production speed and manufacturing precision raises a demand for the automated detection of small image features on rapidly moving surfaces. An example are wire drawing processes where kilometers of cylindrical metal surfaces moving with 10 m/s have to be inspected for defects such as scratches, dents, grooves, or chatter marks with a lateral size of 100 μm in real time. Up to now, complex eddy current systems are used for quality control instead of line cameras, because the ratio between lateral feature size and surface speed is limited by the data transport between camera and computer. This bottleneck is avoided by "cellular neural network" (CNN) cameras which enable image processing directly on the camera chip. This article reports results achieved with a demonstrator based on this novel analogue camera - computer system. The results show that computational speed and accuracy of the analogue computer system are sufficient to detect and discriminate the different types of defects. Area images with 176 x 144 pixels are acquired and evaluated in real time with frame rates of 4 to 10 kHz - depending on the number of defects to be detected. These frame rates correspond to equivalent line rates on line cameras between 360 and 880 kHz, a number far beyond the available features. Using the relation between lateral feature size and surface speed as a figure of merit, the CNN based system outperforms conventional image processing systems by an order of magnitude.

  4. Can math beat gamers in Quantum Moves?

    Sels, Dries

    2017-01-01

    Abstract: In a recent work on quantum state preparation, Sørensen and co-workers [Nature (London) 532, 210 (2016)] explore the possibility of using video games to help design quantum control protocols. The authors present a game called Quantum Moves (https://www.scienceathome.org/games/quantum-moves/) in which gamers have to move an atom from A to B by means of optical tweezers. They report that, players succeed where purely numerical optimization fails. Moreover, by harnessing the player str...

  5. Trading Fees and Slow-Moving Capital

    Buss, Adrian; Dumas, Bernard J

    2015-01-01

    In some situations, investment capital seems to move slowly towards profitable trades. We develop a model of a financial market in which capital moves slowly simply because there is a proportional cost to moving capital. We incorporate trading fees in an infinite-horizon dynamic general-equilibrium model in which investors optimally and endogenously decide when and how much to trade. We determine the steady-state equilibrium no-trade zone, study the dynamics of equilibrium trades and prices a...

  6. Lattice Boltzmann methods for moving boundary flows

    Inamuro, Takaji

    2012-01-01

    The lattice Boltzmann methods (LBMs) for moving boundary flows are presented. The LBM for two-phase fluid flows with the same density and the LBM combined with the immersed boundary method are described. In addition, the LBM on a moving multi-block grid is explained. Three numerical examples (a droplet moving in a constricted tube, the lift generation of a flapping wing and the sedimentation of an elliptical cylinder) are shown in order to demonstrate the applicability of the LBMs to moving boundary problems. (invited review)

  7. Lattice Boltzmann methods for moving boundary flows

    Inamuro, Takaji, E-mail: inamuro@kuaero.kyoto-u.ac.jp [Department of Aeronautics and Astronautics, and Advanced Research Institute of Fluid Science and Engineering, Graduate School of Engineering, Kyoto University, Kyoto 606-8501 (Japan)

    2012-04-01

    The lattice Boltzmann methods (LBMs) for moving boundary flows are presented. The LBM for two-phase fluid flows with the same density and the LBM combined with the immersed boundary method are described. In addition, the LBM on a moving multi-block grid is explained. Three numerical examples (a droplet moving in a constricted tube, the lift generation of a flapping wing and the sedimentation of an elliptical cylinder) are shown in order to demonstrate the applicability of the LBMs to moving boundary problems. (invited review)

  8. SPIRES I: on-line search guide

    Addis, L.

    1975-06-01

    SPIRES I is the first generation of the on-line Stanford Public Information Retrieval System. Designed as a prototype system, SPIRES I was later moved to the SLAC computing facility where it has been routinely available to SLAC users in the field of high-energy physics. The scope and use of the SPIRES I system are described in this manual

  9. VT Digital Line Graph Miscellaneous Transmission Lines

    Vermont Center for Geographic Information — (Link to Metadata) This datalayer is comprised of Miscellaineous Transmission Lines. Digital line graph (DLG) data are digital representations of cartographic...

  10. Moving into the third dimension

    Alizée Dauvergne

    2010-01-01

    One detail at a time, digital 3-D models of CERN’s various machines are being created by the Integration Section in the Machines & Experimental Facilities Group (EN/MEF) . The work, which requires painstaking attention to detail on a colossal scale, facilitates improvements to existing accelerators and the design of new machines in the future.   Virtual representation of the LHC A complete digital mockup of the LHC in three dimensions already exists, including of course the tunnel, the machine systems including magnets and vacuum chambers, but also all of the various services such as cable ladders, piping systems and access control and so on. Only the colour and the texture of the surfaces betray that it is a mockup and not the real thing! The mockup of LINAC4 is finished too. The mockups for the SPS, ISOLDE and the entire PS complex, including transfer lines, are still being created. “Creating these 3-D mockups will allow us to work on forthcoming machine improvements, esp...

  11. Moving core beam energy absorber and converter

    Degtiarenko, Pavel V.

    2012-12-18

    A method and apparatus for the prevention of overheating of laser or particle beam impact zones through the use of a moving-in-the-coolant-flow arrangement for the energy absorbing core of the device. Moving of the core spreads the energy deposition in it in 1, 2, or 3 dimensions, thus increasing the effective cooling area of the device.

  12. Theses "Discussion" Sections: A Structural Move Analysis

    Nodoushan, Mohammad Ali Salmani; Khakbaz, Nafiseh

    2011-01-01

    The current study aimed at finding the probable differences between the move structure of Iranian MA graduates' thesis discussion subgenres and those of their non-Iranian counterparts, on the one hand, and those of journal paper authors, on the other. It also aimed at identifying the moves that are considered obligatory, conventional, or optional…

  13. How to Move in a Jostling Crowd

    For people living in big cities it is an ordeal to walk in a bus stand or a railway station. They get stuck helplessly in a crowd. They are simply pushed around and all their efforts to move forward appear futile. Only the most energetic can wade through the constantly moving sea of people. How about the weaker ones?

  14. Online Risk Prediction for Indoor Moving Objects

    Ahmed, Tanvir; Pedersen, Torben Bach; Calders, Toon

    2016-01-01

    Technologies such as RFID and Bluetooth have received considerable attention for tracking indoor moving objects. In a time-critical indoor tracking scenario such as airport baggage handling, a bag has to move through a sequence of locations until it is loaded into the aircraft. Inefficiency or in...... reduce the operation cost....

  15. Student-Centered Coaching: The Moves

    Sweeney, Diane; Harris, Leanna S.

    2017-01-01

    Student-centered coaching is a highly-effective, evidence-based coaching model that shifts the focus from "fixing" teachers to collaborating with them to design instruction that targets student outcomes. But what does this look like in practice? "Student-Centered Coaching: The Moves" shows you the day-to-day coaching moves that…

  16. Moving forward: response to "Studying eyewitness investigations in the field".

    Ross, Stephen J; Malpass, Roy S

    2008-02-01

    Field studies of eyewitness identification are richly confounded. Determining which confounds undermine interpretation is important. The blind administration confound in the Illinois study is said to undermine it's value for understanding the relative utility of simultaneous and sequential lineups. Most criticisms of the Illinois study focus on filler identifications, and related inferences about the importance of the blind confound. We find no convincing evidence supporting this line of attack and wonder at filler identifications as the major line of criticism. More debilitating problems impede using the Illinois study to address the simultaneous versus sequential lineup controversy: inability to estimate guilt independent of identification evidence, lack of protocol compliance monitoring, and assessment of lineups quality. Moving forward requires removing these limitations.

  17. Moving Target Photometry Using WISE and NEOWISE

    Wright, Edward L.

    2015-01-01

    WISE band 1 observations have a significant noise contribution from confusion. The image subtraction done on W0855-0714 by Wright et al. (2014) shows that this noise source can be eliminated for sources that move by much more than the beamsize. This paper describes an analysis that includes a pattern of celestially fixed flux plus a source moving with a known trajectory. This technique allows the confusion noise to be modeled with nuisance parameters and removed even for sources that have not moved by many beamwidths. However, the detector noise is magnified if the motion is too small. Examples of the method applied to fast moving Y dwarfs and slow moving planets will be shown.

  18. Moving Matters: The Causal Effect of Moving Schools on Student Performance. Working Paper #01-15

    Schwartz, Amy Ellen; Stiefel, Leanna; Cordes, Sarah A.

    2015-01-01

    The majority of existing research on mobility indicates that students do worse in the year of a school move. This research, however, has been unsuccessful in isolating the causal effects of mobility and often fails to distinguish the heterogeneous impacts of moves, conflating structural moves (mandated by a school's terminal grade) and…

  19. Meteorological Research Institute multivariate ocean variational estimation (MOVE) system: Some early results

    Usui, Norihisa; Ishizaki, Shiro; Fujii, Yosuke; Tsujino, Hiroyuki; Yasuda, Tamaki; Kamachi, Masafumi

    The Meteorological Research Institute multivariate ocean variational estimation (MOVE) System has been developed as the next-generation ocean data assimilation system in Japan Meteorological Agency. A multivariate three-dimensional variational (3DVAR) analysis scheme with vertical coupled temperature salinity empirical orthogonal function modes is adopted. The MOVE system has two varieties, the global (MOVE-G) and North Pacific (MOVE-NP) systems. The equatorial Pacific and western North Pacific are analyzed with assimilation experiments using MOVE-G and -NP, respectively. In each system, the salinity and velocity fields are well reproduced, even in cases without salinity data. Changes in surface and subsurface zonal currents during the 1997/98 El Niño event are captured well, and their transports are reasonably consistent with in situ observations. For example, the eastward transport in the upper layer around the equator has 70 Sv in spring 1997 and weakens in spring 1998. With MOVE-NP, the Kuroshio transport has 25 Sv in the East China Sea, and 40 Sv crossing the ASUKA (Affiliated Surveys of the Kuroshio off Cape Ashizuri) line south of Japan. The variations in the Kuroshio transports crossing the ASUKA line agree well with observations. The Ryukyu Current System has a transport ranging from 6 Sv east of Taiwan to 17 Sv east of Amami. The Oyashio transport crossing the OICE (Oyashio Intensive observation line off Cape Erimo) line south of Hokkaido has 14 Sv southwestward (near shore) and 11 Sv northeastward (offshore). In the Kuroshio Oyashio transition area east of Japan, the eastward transport has 41 Sv (32 36°N) and 12 Sv (36 39°N) crossing the 145°E line.

  20. Rearrangement moves on rooted phylogenetic networks.

    Gambette, Philippe; van Iersel, Leo; Jones, Mark; Lafond, Manuel; Pardi, Fabio; Scornavacca, Celine

    2017-08-01

    Phylogenetic tree reconstruction is usually done by local search heuristics that explore the space of the possible tree topologies via simple rearrangements of their structure. Tree rearrangement heuristics have been used in combination with practically all optimization criteria in use, from maximum likelihood and parsimony to distance-based principles, and in a Bayesian context. Their basic components are rearrangement moves that specify all possible ways of generating alternative phylogenies from a given one, and whose fundamental property is to be able to transform, by repeated application, any phylogeny into any other phylogeny. Despite their long tradition in tree-based phylogenetics, very little research has gone into studying similar rearrangement operations for phylogenetic network-that is, phylogenies explicitly representing scenarios that include reticulate events such as hybridization, horizontal gene transfer, population admixture, and recombination. To fill this gap, we propose "horizontal" moves that ensure that every network of a certain complexity can be reached from any other network of the same complexity, and "vertical" moves that ensure reachability between networks of different complexities. When applied to phylogenetic trees, our horizontal moves-named rNNI and rSPR-reduce to the best-known moves on rooted phylogenetic trees, nearest-neighbor interchange and rooted subtree pruning and regrafting. Besides a number of reachability results-separating the contributions of horizontal and vertical moves-we prove that rNNI moves are local versions of rSPR moves, and provide bounds on the sizes of the rNNI neighborhoods. The paper focuses on the most biologically meaningful versions of phylogenetic networks, where edges are oriented and reticulation events clearly identified. Moreover, our rearrangement moves are robust to the fact that networks with higher complexity usually allow a better fit with the data. Our goal is to provide a solid basis for

  1. Rearrangement moves on rooted phylogenetic networks.

    Philippe Gambette

    2017-08-01

    Full Text Available Phylogenetic tree reconstruction is usually done by local search heuristics that explore the space of the possible tree topologies via simple rearrangements of their structure. Tree rearrangement heuristics have been used in combination with practically all optimization criteria in use, from maximum likelihood and parsimony to distance-based principles, and in a Bayesian context. Their basic components are rearrangement moves that specify all possible ways of generating alternative phylogenies from a given one, and whose fundamental property is to be able to transform, by repeated application, any phylogeny into any other phylogeny. Despite their long tradition in tree-based phylogenetics, very little research has gone into studying similar rearrangement operations for phylogenetic network-that is, phylogenies explicitly representing scenarios that include reticulate events such as hybridization, horizontal gene transfer, population admixture, and recombination. To fill this gap, we propose "horizontal" moves that ensure that every network of a certain complexity can be reached from any other network of the same complexity, and "vertical" moves that ensure reachability between networks of different complexities. When applied to phylogenetic trees, our horizontal moves-named rNNI and rSPR-reduce to the best-known moves on rooted phylogenetic trees, nearest-neighbor interchange and rooted subtree pruning and regrafting. Besides a number of reachability results-separating the contributions of horizontal and vertical moves-we prove that rNNI moves are local versions of rSPR moves, and provide bounds on the sizes of the rNNI neighborhoods. The paper focuses on the most biologically meaningful versions of phylogenetic networks, where edges are oriented and reticulation events clearly identified. Moreover, our rearrangement moves are robust to the fact that networks with higher complexity usually allow a better fit with the data. Our goal is to provide

  2. Energy flux correlations and moving mirrors

    Ford, L.H.; Roman, Thomas A.

    2004-01-01

    We study the quantum stress tensor correlation function for a massless scalar field in a flat two-dimensional spacetime containing a moving mirror. We construct the correlation functions for right-moving and left-moving fluxes for an arbitrary trajectory, and then specialize them to the case of a mirror trajectory for which the expectation value of the stress tensor describes a pair of delta-function pulses, one of negative energy and one of positive energy. The flux correlation function describes the fluctuations around this mean stress tensor, and reveals subtle changes in the correlations between regions where the mean flux vanishes

  3. Distributed Measurement Data Gathering about Moving Objects

    Ivan Kholod

    2017-01-01

    Full Text Available This paper describes approaches to gathering measurement data about moving objects in networks with low bandwidth. The first approach uses Fog computing conception and suggests moving assessing the quality of the measurement data into measuring points. The second approach uses prediction of telemetry quality by mining models. In addition, the paper presents implementation of these approaches based on actor model. As a result, it became possible not only to load balancing among edge and cloud nodes, but also to significantly reduce the network traffic, which in turn brings the possibility of decreasing the requirements for communication channels bandwidth and of using wireless networks for gathering measurement data about moving objects.

  4. The Pulse Line Ion Accelerator Concept

    Briggs, Richard J.

    2006-02-15

    The Pulse Line Ion Accelerator concept was motivated by the desire for an inexpensive way to accelerate intense short pulse heavy ion beams to regimes of interest for studies of High Energy Density Physics and Warm Dense Matter. A pulse power driver applied at one end of a helical pulse line creates a traveling wave pulse that accelerates and axially confines the heavy ion beam pulse. Acceleration scenarios with constant parameter helical lines are described which result in output energies of a single stage much larger than the several hundred kilovolt peak voltages on the line, with a goal of 3-5 MeV/meter acceleration gradients. The concept might be described crudely as an ''air core'' induction linac where the PFN is integrated into the beam line so the accelerating voltage pulse can move along with the ions to get voltage multiplication.

  5. Exoplanet Caught on the Move

    2010-06-01

    For the first time, astronomers have been able to directly follow the motion of an exoplanet as it moves from one side of its host star to the other. The planet has the smallest orbit so far of all directly imaged exoplanets, lying almost as close to its parent star as Saturn is to the Sun. Scientists believe that it may have formed in a similar way to the giant planets in the Solar System. Because the star is so young, this discovery proves that gas giant planets can form within discs in only a few million years, a short time in cosmic terms. Only 12 million years old, or less than three-thousandths of the age of the Sun, Beta Pictoris is 75% more massive than our parent star. It is located about 60 light-years away towards the constellation of Pictor (the Painter) and is one of the best-known examples of a star surrounded by a dusty debris disc [1]. Earlier observations showed a warp of the disc, a secondary inclined disc and comets falling onto the star. "Those were indirect, but tell-tale signs that strongly suggested the presence of a massive planet, and our new observations now definitively prove this," says team leader Anne-Marie Lagrange. "Because the star is so young, our results prove that giant planets can form in discs in time-spans as short as a few million years." Recent observations have shown that discs around young stars disperse within a few million years, and that giant planet formation must occur faster than previously thought. Beta Pictoris is now clear proof that this is indeed possible. The team used the NAOS-CONICA instrument (or NACO [2]), mounted on one of the 8.2-metre Unit Telescopes of ESO's Very Large Telescope (VLT), to study the immediate surroundings of Beta Pictoris in 2003, 2008 and 2009. In 2003 a faint source inside the disc was seen (eso0842), but it was not possible to exclude the remote possibility that it was a background star. In new images taken in 2008 and spring 2009 the source had disappeared! The most recent

  6. Quantifying drag on wellbore casings in moving salt sheets

    Weijermars, R.; Jackson, M. P. A.; Dooley, T. P.

    2014-08-01

    Frontier hydrocarbon development projects in the deepwater slopes of the Gulf of Mexico Basin, Santos Basin and Lower Congo Basin all require wells to cross ductile layers of autochthonous or allochthonous salt moving at peak rates of 100 mm yr-1. The Couette-Poiseuille number is introduced here to help pinpoint the depth of shear stress reversal in such salt layers. For any well-planned through salt, the probable range of creep forces of moving salt needs to be taken into account when designing safety margins and load-factor tolerance of the well casing. Drag forces increase with wellbore diameter, but more significantly with effective viscosity and speed of the creeping salt layer. The potential drag forces on cased wellbores in moving salt sheets are estimated analytically using a range of salt viscosities (1015-1019 Pa s) and creep rates (0-10 mm yr-1). Drag on perfectly rigid casing of infinite strength may reach up to 13 Giga Newton per meter wellbore length in salt having a viscosity of 1019 Pa s. Well designers may delay stress accumulations due to salt drag when flexible casing accommodates some of the early displacement and strain. However, all creeping salt could displace, fracture and disconnect well casing, eventually. The shear strength of typical heavy duty well casing (about 1000 MPa) can be reached due to drag by moving salt. Internal flow of salt will then fracture the casing near salt entry and exit points, but the structural damage is likely to remain unnoticed early in the well-life when the horizontal shift of the wellbore is still negligibly small (at less than 1 cm yr-1). Disruption of casing and production flow lines within the anticipated service lifetime of a well remains a significant risk factor within distinct zones of low-viscosity salt which may reach ultrafast creep rates of 100 mm yr-1.

  7. Inserting Phase Change Lines into Microsoft Excel® Graphs.

    Dubuque, Erick M

    2015-10-01

    Microsoft Excel® is a popular graphing tool used by behavior analysts to visually display data. However, this program is not always friendly to the graphing conventions used by behavior analysts. For example, adding phase change lines has typically been a cumbersome process involving the insertion of line objects that do not move when new data is added to a graph. The purpose of this article is to describe a novel way to add phase change lines that move when new data is added and when graphs are resized.

  8. Quantum correlation with moving beamsplitters in relativistic ...

    In multisimultaneity, as in the pilot-wave model, each particle emerging ... reference frames, each defining a time ordering, hence the name of multisimultaneity. In ... The setup we used to test entanglement of the photon pairs with moving ...

  9. MOVES2010a regional level sensitivity analysis

    2012-12-10

    This document discusses the sensitivity of various input parameter effects on emission rates using the US Environmental Protection Agencys (EPAs) MOVES2010a model at the regional level. Pollutants included in the study are carbon monoxide (CO),...

  10. Preparing Your Child for a Move

    ... it. Kids can need some time and special attention during the transition. Try these tips to make the process less stressful for everyone. Making the Decision to Move Many kids thrive on familiarity and ...

  11. Being Moved: Linguistic Representation and Conceptual Structure

    Milena eKuehnast

    2014-11-01

    Full Text Available This study explored the organisation of the semantic field and the conceptual structure of moving experiences by investigating German-language expressions referring to the emotional state of being moved. We used present and past participles of eight psychological verbs as primes in a free word-association task, as these grammatical forms place their conceptual focus on the eliciting situation and on the felt emotional state, respectively. By applying a taxonomy of basic knowledge types and computing the Cognitive Salience Index, we identified joy and sadness as key emotional ingredients of being moved, and significant life events and art experiences as main elicitors of this emotional state. Metric multidimensional scaling analyses of the semantic field revealed that the core terms designate a cluster of emotional states characterised by low degrees of arousal and slightly positive valence, the latter due to a nearly balanced representation of positive and negative elements in the conceptual structure of being moved.

  12. FDTD Seismic Simulation of Moving Tracked Vehicle

    Ketcham, Stephen

    2000-01-01

    This paper describes the utility of a large finite-difference time domain (FDTD) simulation of seismic wave propagation from a spatially and time varying source that generically represents a moving tracked vehicle...

  13. Moving objects management models, techniques and applications

    Meng, Xiaofeng; Xu, Jiajie

    2014-01-01

    This book describes the topics of moving objects modeling and location tracking, indexing and querying, clustering, location uncertainty, traffic aware navigation and privacy issues as well as the application to intelligent transportation systems.

  14. Operational overhead of moving to higher energies

    Lamont, M

    2011-01-01

    The operational overheads of moving above 3.5 TeV are examined. The costs of performing such a move at the start, or during, the 2011 run are evaluated. The impact of operation with beams above 3.5 TeV on machine protection systems is briefly reviewed, and any potential limitations are enumerated. Finally the possible benefits of increasing the beam energy on the luminosity are discussed.

  15. Being moved: linguistic representation and conceptual structure

    Kuehnast, Milena; Wagner, Valentin; Wassiliwizky, Eugen; Jacobsen, Thomas; Menninghaus, Winfried

    2014-01-01

    This study explored the organization of the semantic field and the conceptual structure of moving experiences by investigating German-language expressions referring to the emotional state of being moved. We used present and past participles of eight psychological verbs as primes in a free word-association task, as these grammatical forms place their conceptual focus on the eliciting situation and on the felt emotional state, respectively. By applying a taxonomy of basic knowledge types and co...

  16. Transition radiation excited by a load moving over the interface of two elastic layers

    Van Dalen, K.N.; Metrikine, A.; Tsouvalas, A.

    2014-01-01

    Transition radiation is emitted when a perturbation source (e.g., electric charge, mechanical load), which does not possess an inherent frequency, moves along a straight line at a constant velocity in or near an inhomogeneous medium. The phenomenon was described for the first time in

  17. Steady-state response of periodically supported structures to a moving load

    Metrikine, A.V.; Wolfert, A.R.M.; Vrouwenvelder, A.C.W.M.

    1999-01-01

    Steady-state vibrations of periodically supported structures under a moving load are analytically investigated. The following three structures are considered: an overhead power line for a train, a long suspended bridge and a railway track. The study is based on the application of so-called

  18. The Grid Method in Estimating the Path Length of a Moving Animal

    Reddingius, J.; Schilstra, A.J.; Thomas, G.

    1983-01-01

    (1) The length of a path covered by a moving animal may be estimated by counting the number of times the animal crosses any line of a grid and applying a conversion factor. (2) Some factors are based on the expected distance through a randomly crossed square; another on the expected crossings of a

  19. A comparison of moving object detection methods for real-time moving object detection

    Roshan, Aditya; Zhang, Yun

    2014-06-01

    Moving object detection has a wide variety of applications from traffic monitoring, site monitoring, automatic theft identification, face detection to military surveillance. Many methods have been developed across the globe for moving object detection, but it is very difficult to find one which can work globally in all situations and with different types of videos. The purpose of this paper is to evaluate existing moving object detection methods which can be implemented in software on a desktop or laptop, for real time object detection. There are several moving object detection methods noted in the literature, but few of them are suitable for real time moving object detection. Most of the methods which provide for real time movement are further limited by the number of objects and the scene complexity. This paper evaluates the four most commonly used moving object detection methods as background subtraction technique, Gaussian mixture model, wavelet based and optical flow based methods. The work is based on evaluation of these four moving object detection methods using two (2) different sets of cameras and two (2) different scenes. The moving object detection methods have been implemented using MatLab and results are compared based on completeness of detected objects, noise, light change sensitivity, processing time etc. After comparison, it is observed that optical flow based method took least processing time and successfully detected boundary of moving objects which also implies that it can be implemented for real-time moving object detection.

  20. Temperature distribution in a uniformly moving medium

    Mitchell, Joseph D; Petrov, Nikola P

    2009-01-01

    We apply several physical ideas to determine the steady temperature distribution in a medium moving with uniform velocity between two infinite parallel plates. We compute it in the coordinate frame moving with the medium by integration over the 'past' to account for the influence of an infinite set of instantaneous point sources of heat in past moments as seen by an observer moving with the medium. The boundary heat flux is simulated by appropriately distributed point heat sources on the inner side of an adiabatically insulating boundary. We make an extensive use of the Green functions with an emphasis on their physical meaning. The methodology used in this paper is of great pedagogical value as it offers an opportunity for students to see the connection between powerful mathematical techniques and their physical interpretation in an intuitively clear physical problem. We suggest several problems and a challenging project that can be easily incorporated in undergraduate or graduate courses

  1. Linux command line and shell scripting bible

    Blum, Richard

    2014-01-01

    Talk directly to your system for a faster workflow with automation capability Linux Command Line and Shell Scripting Bible is your essential Linux guide. With detailed instruction and abundant examples, this book teaches you how to bypass the graphical interface and communicate directly with your computer, saving time and expanding capability. This third edition incorporates thirty pages of new functional examples that are fully updated to align with the latest Linux features. Beginning with command line fundamentals, the book moves into shell scripting and shows you the practical application

  2. Modeling operational behavior of a disassembly line

    Kizilkaya, Elif A.; Gupta, Surendra M.

    2004-12-01

    In this paper we present a dynamic kanban (pull) system specifically developed for disassembly lines. This type of kanban system is much more complex than the traditional kanban system used in assembly lines. For instance, unlike the assembly line where the external demand occurs only at the last station, the demands in the disassembly case also occur at any of the intermittent stations. The reason is that as a product moves on the disassembly line, various parts are disassembled at every station and accumulated at that station. Therefore, there are as many demand sources as there are number of parts. We consider a case example involving the end-of-life products. Based on the precedence relationships and other criteria such as hazardous properties of the parts, we balance the disassembly line. The results of the disassembly line-balancing problem (DLBP) are used as input to the proposed dynamic kanban system for disassembly line (DKSDL). We compare the performance of the DKSDL to the modified kanban system for disassembly line (MKSDL), which was previously introduced by the authors. We show, via simulation, that the DKSDL is far superior to MKSDL considered.

  3. Energy flow around a moving dislocation

    Koizumi, H; Kirchner, H O K

    2009-01-01

    A dislocation moving in a lattice emits lattice waves. We study the energy flow accompanying the lattice wave emission in a molecular dynamics situation. About two thirds of the static free energy are emitted as lattice waves from the moving dislocation. Work done by the region around the dislocation helps to initiate the motion from the unstable equilibrium state under a small applied stress, or to compensate the energy emitted as lattice waves when the dislocation makes a long distance motion under a larger stress.

  4. ELECTROMAGNETIC APPARATUS FOR MOVING A ROD

    Young, J.N.

    1958-04-22

    An electromagnetic apparatus for moving a rod-like member in small steps in either direction is described. The invention has particular application in the reactor field where the reactor control rods must be moved only a small distance and where the use of mechanical couplings is impractical due to the high- pressure seals required. A neutron-absorbing rod is mounted in a housing with gripping uaits that engage the rod, and coils for magnetizing the gripping units to make them grip, shift, and release the rod are located outside the housing.

  5. No quantum friction between uniformly moving plates

    Philbin, T G; Leonhardt, U [School of Physics and Astronomy, University of St Andrews, North Haugh St Andrews, Fife KY16 9SS, Scotland (United Kingdom)], E-mail: tgp3@st-andrews.ac.uk

    2009-03-15

    The Casimir forces between two plates moving parallel to each other at arbitrary constant speed are found by calculating the vacuum electromagnetic stress tensor. The perpendicular force between the plates is modified by the motion but there is no lateral force on the plates. Electromagnetic vacuum fluctuations do not therefore give rise to 'quantum friction' in this case, contrary to previous assertions. The result shows that the Casimir-Polder force on a particle moving at constant speed parallel to a plate also has no lateral component.

  6. No quantum friction between uniformly moving plates

    Philbin, T G; Leonhardt, U

    2009-01-01

    The Casimir forces between two plates moving parallel to each other at arbitrary constant speed are found by calculating the vacuum electromagnetic stress tensor. The perpendicular force between the plates is modified by the motion but there is no lateral force on the plates. Electromagnetic vacuum fluctuations do not therefore give rise to 'quantum friction' in this case, contrary to previous assertions. The result shows that the Casimir-Polder force on a particle moving at constant speed parallel to a plate also has no lateral component.

  7. Clustering Moving Objects Using Segments Slopes

    Mohamed E. El-Sharkawi; Hoda M. O. Mokhtar; Omnia Ossama

    2011-01-01

    Given a set of moving object trajectories, we show how to cluster them using k-meansclustering approach. Our proposed clustering algorithm is competitive with the k-means clusteringbecause it specifies the value of “k” based on the segment’s slope of the moving object trajectories. Theadvantage of this approach is that it overcomes the known drawbacks of the k-means algorithm, namely,the dependence on the number of clusters (k), and the dependence on the initial choice of the clusters’centroi...

  8. Moving Shadow Detection in Video Using Cepstrum

    Fuat Cogun

    2013-01-01

    Full Text Available Moving shadows constitute problems in various applications such as image segmentation and object tracking. The main cause of these problems is the misclassification of the shadow pixels as target pixels. Therefore, the use of an accurate and reliable shadow detection method is essential to realize intelligent video processing applications. In this paper, a cepstrum-based method for moving shadow detection is presented. The proposed method is tested on outdoor and indoor video sequences using well-known benchmark test sets. To show the improvements over previous approaches, quantitative metrics are introduced and comparisons based on these metrics are made.

  9. EDITORIAL: `Il sole - no si move'

    Kibble, Bob

    1999-05-01

    The Sun may not have moved for Galileo but it is certain that this coming August the Sun will have moved millions of folk towards a thin strip of land about 100 km wide stretching from Cornwall to the Indian Ocean. If you have yet to book your place for the biggest live show of this millennium year there are still places in hotels and campsites. The April edition of the UK camping and caravaning club magazine included at least four sites in Cornwall alone with vacancies. I am told that the difference between seeing a 98% eclipse and totality is considerably greater than 2%. The message appears to be - try to get to the line. However, a popular misconception among lay folk seems to be that you will only be able to see the event in Cornwall. As you will read in this issue the partial event will be visible from virtually the whole of Europe. Anyone who has tried to holiday in Cornwall or Devon will tell you how congested the roads become in any ordinary August. The best advice for this year is either to travel to the south west by bicycle or attack the totality path as it crosses Europe. Access will be much easier. For my part I have booked a hotel in Trier, Germany, about 20 km north of the totality path. An early breakfast on the 11th should leave enough time to motorcycle down to see the shadow. Of course, the whole business is weather dependent. With the chance of a clear sky in Cornwall, Devon and most of western Europe being about 50% on the date in question, forward planning depends on whether you are a `half empty' or a `half full' person. It is worth keeping this fact in mind especially if you drag an expectant family hundreds of miles through traffic just to watch the clouds drift by. Take a colouring book and a board game just in case. Of course, the chance of a clear sky increases to about 90% across Turkey but there are reasons why such a trip might not be so wise in the current political climate. In this special issue readers will find plenty to interest

  10. 77 FR 16566 - Submission for OMB Review, Comment Request, Proposed Collection: Let's Move Museums, Let's Move...

    2012-03-21

    ..., Proposed Collection: Let's Move Museums, Let's Move Gardens AGENCY: Institute of Museum and Library..., comment request. SUMMARY: The Institute of Museum and Library Services announces that the following... functions of the agency, including whether the information will have practical utility; Evaluate the...

  11. Detection of moving objects from a moving platform in urban scenes

    Haar, F.B. ter; Hollander, R.J.M. den; Dijk, J.

    2010-01-01

    Moving object detection in urban scenes is important for the guidance of autonomous vehicles, robot navigation, and monitoring. In this paper moving objects are automatically detected using three sequential frames and tracked over a longer period. To this extend we modify the plane+parallax,

  12. Planar dynamics of large-deformation rods under moving loads

    Zhao, X. W.; van der Heijden, G. H. M.

    2018-01-01

    We formulate the problem of a slender structure (a rod) undergoing large deformation under the action of a moving mass or load motivated by inspection robots crawling along bridge cables or high-voltage power lines. The rod is described by means of geometrically exact Cosserat theory which allows for arbitrary planar flexural, extensional and shear deformations. The equations of motion are discretised using the generalised-α method. The formulation is shown to handle the discontinuities of the problem well. Application of the method to a cable and an arch problem reveals interesting nonlinear phenomena. For the cable problem we find that large deformations have a resonance detuning effect on cable dynamics. The problem also offers a compelling illustration of the Timoshenko paradox. For the arch problem we find a stabilising (delay) effect on the in-plane collapse of the arch, with failure suppressed entirely at sufficiently high speed.

  13. Non-ideal magnetohydrodynamics on a moving mesh

    Marinacci, Federico; Vogelsberger, Mark; Kannan, Rahul; Mocz, Philip; Pakmor, Rüdiger; Springel, Volker

    2018-05-01

    In certain astrophysical systems, the commonly employed ideal magnetohydrodynamics (MHD) approximation breaks down. Here, we introduce novel explicit and implicit numerical schemes of ohmic resistivity terms in the moving-mesh code AREPO. We include these non-ideal terms for two MHD techniques: the Powell 8-wave formalism and a constrained transport scheme, which evolves the cell-centred magnetic vector potential. We test our implementation against problems of increasing complexity, such as one- and two-dimensional diffusion problems, and the evolution of progressive and stationary Alfvén waves. On these test problems, our implementation recovers the analytic solutions to second-order accuracy. As first applications, we investigate the tearing instability in magnetized plasmas and the gravitational collapse of a rotating magnetized gas cloud. In both systems, resistivity plays a key role. In the former case, it allows for the development of the tearing instability through reconnection of the magnetic field lines. In the latter, the adopted (constant) value of ohmic resistivity has an impact on both the gas distribution around the emerging protostar and the mass loading of magnetically driven outflows. Our new non-ideal MHD implementation opens up the possibility to study magneto-hydrodynamical systems on a moving mesh beyond the ideal MHD approximation.

  14. Vibration analysis of continuous maglev guideways with a moving distributed load model

    Teng, N G; Qiao, B P [Department of Civil Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240 (China)

    2008-02-15

    A model of moving distributed load with a constant speed is established for vertical vibration analysis of a continuous guideway in maglev transportation system. The guideway is considered as a continuous structural system and the action of maglev vehicles on guideways is considered as a moving distributed load. Vibration of the continuous guideways used in Shanghai maglev line is analyzed with this model. The factors that affect the vibration of the guideways, such as speeds, guideway's spans, frequency and damping, are discussed.

  15. Cable line engineering

    Jang, Hak Sin; Kim, Sin Yeong

    1998-02-01

    This book is about cable line engineering. It is comprised of nine chapters, which deals with summary of cable communication such as way, process of cable communication and optical communication, Line constant of transmission on primary constant, reflection and crosstalk, communication cable line of types like flat cable, coaxial cable and loaded cable, Install of communication line with types and facility of aerial line, construction method of communication line facility, Measurement of communication line, Carrier communication of summary, PCM communication with Introduction, regeneration relay system sampling and quantization and Electric communication service and general information network with mobile communication technique and satellite communication system.

  16. Spatiotemporal Compression Techniques for Moving Point Objects

    Meratnia, Nirvana; de By, R.A.; de By, R.A.; Bertino, E.

    Moving object data handling has received a fair share of attention over recent years in the spatial database community. This is understandable as positioning technology is rapidly making its way into the consumer market, not only through the already ubiquitous cell phone but soon also through small,

  17. Moving Divertor Plates in a Tokamak

    Zweben, S.J.; Zhang, H.

    2009-01-01

    Moving divertor plates could help solve some of the problems of the tokamak divertor through mechanical ingenuity rather than plasma physics. These plates would be passively heated on each pass through the tokamak and cooled and reprocessed outside the tokamak. There are many design options using varying plate shapes, orientations, motions, coatings, and compositions

  18. Moving vortices in noncommutative gauge theory

    Horvathy, P.A.; Stichel, P.C.

    2004-01-01

    Exact time-dependent solutions of nonrelativistic noncommutative Chern-Simons gauge theory are presented in closed analytic form. They are different from (indeed orthogonal to) those discussed recently by Hadasz, Lindstroem, Rocek and von Unge. Unlike theirs, our solutions can move with an arbitrary constant velocity, and can be obtained from the previously known static solutions by the recently found 'exotic' boost symmetry

  19. EPI moved in beam S3

    1977-01-01

    The housing of the External Particle Identifier (EPI) is being moved to S3 beam. Test measurements with EPI were performed in the S3 beam between 20 and 110 GeV/c, before installing it behind BEBC. 110 GeV/c before

  20. The Electromagnetic Force between Two Moving Charges

    Minkin, Leonid; Shapovalov, Alexander S.

    2018-01-01

    A simple model of parallel motion of two point charges and the subsequent analysis of the electromagnetic field transformation invariant quantity are considered. It is shown that ignoring the coupling of electric and magnetic fields, as is done in some introductory physics books, can lead to miscalculations of the force between moving charges.…

  1. Electromagnetic Sources in Moving Simple Medium

    Johannsen, Günther

    1970-01-01

    A retarded potential tensor (4-vector) is derived in an arbitrary system of inertia for an arbitrary electromagnetic source in a moving homogeneous, isotropic, nondispersive, lossless dielectric. The velocity is uniform, and the result is relativistic correct. ©1970 The American Institute...

  2. Electromagnetic Sources in a Moving Conducting Medium

    Johannsen, Günther

    1971-01-01

    The problem of an arbitrary source distribution in a uniformly moving, homogeneous, isotropic, nondispersive, conducting medium is solved. The technique used is to solve the problem in the rest system of the medium and then write the result in an appropriate four-dimensional, covariant form which...

  3. Moving On: Young People and Substance Abuse

    Daley, Kathryn; Chamberlain, Chris

    2009-01-01

    To help explain why some young people move from recreational drug use to substance abuse, twelve in-depth interviews were conducted with young people who had experienced problematic substance use. The data were supplemented by statistical data on 111 young people. The researchers found a variety of "structural" factors that help explain…

  4. Towards a Psychological Construct of Being Moved

    Menninghaus, Winfried; Wagner, Valentin; Hanich, Julian; Wassiliwizky, Eugen; Kuehnast, Milena; Jacobsen, Thomas

    2015-01-01

    The emotional state of being moved, though frequently referred to in both classical rhetoric and current language use, is far from established as a well-defined psychological construct. In a series of three studies, we investigated eliciting scenarios, emotional ingredients, appraisal patterns,

  5. A dynamic analysis of moving average rules

    Chiarella, C.; He, X.Z.; Hommes, C.H.

    2006-01-01

    The use of various moving average (MA) rules remains popular with financial market practitioners. These rules have recently become the focus of a number empirical studies, but there have been very few studies of financial market models where some agents employ technical trading rules of the type

  6. Cooperative Scalable Moving Continuous Query Processing

    Li, Xiaohui; Karras, Panagiotis; Jensen, Christian S.

    2012-01-01

    of the global view and handle the majority of the workload. Meanwhile, moving clients, having basic memory and computation resources, handle small portions of the workload. This model is further enhanced by dynamic region allocation and grid size adjustment mechanisms that reduce the communication...... and computation cost for both servers and clients. An experimental study demonstrates that our approaches offer better scalability than competitors...

  7. Supportive Discourse Moves in Persian Requests

    Nodoushan, Mohammad Ali Salmani; Allami, Hamid

    2011-01-01

    This paper reports the findings of a study designed to investigate the types of supportive discourse moves employed by Persian speakers in their Requestive Speech Acts. 372 respondents took a Discourse Completion Test (DCT) with six scenarios ranging from formal to informal degrees of Perceived Situational Seriousness, and returned 2232 Requestive…

  8. Slow-light pulses in moving media

    Fiurasek, J.; Leonhardt, U.; Parentani, R.

    2002-01-01

    Slow light in moving media reaches a counterintuitive regime when the flow speed of the medium approaches the group velocity of light. Pulses can penetrate a region where a counterpropagating flow exceeds the group velocity. When the counterflow slows down, pulses are reflected

  9. On the atmosphere of a moving body

    Pedersen, Johan Rønby; Aref, Hassan

    2010-01-01

    We explore whether a rigid body moving freely with no circulation around it in a two-dimensional ideal fluid can carry a fluid "atmosphere" with it in its motion. Somewhat surprisingly, the answer appears to be "yes." When the body is elongated and the motion is dominated by rotation, we demonstr...

  10. On the atmosphere of a moving body

    Pedersen, Johan Rønby; Aref, Hassan

    2010-01-01

    We have explored whether a rigid body moving freely with no circulation around it in a two-dimensional ideal fluid can carry a fluid ``atmosphere'' with it in its motion. Somewhat surprisingly, the answer appears to be ``yes''. When the body is elongated and the motion is dominated by rotation, w...

  11. Holistic Processing of Static and Moving Faces

    Zhao, Mintao; Bülthoff, Isabelle

    2017-01-01

    Humans' face ability develops and matures with extensive experience in perceiving, recognizing, and interacting with faces that move most of the time. However, how facial movements affect 1 core aspect of face ability--holistic face processing--remains unclear. Here we investigated the influence of rigid facial motion on holistic and part-based…

  12. Finding Funds to Move Summer Learning Forward

    Seidel, Bob

    2015-01-01

    Summer learning loss creates a permanent drag on the US education system. With the generous support of the Charles Stewart Mott Foundation, the National Summer Learning Association (NSLA) developed "Moving Summer Learning Forward: A Strategic Roadmap for Funding in Tough Times" to provide out-of-school time programs, school districts,…

  13. Strategic Game Moves Mediate Implicit Science Learning

    Rowe, Elizabeth; Baker, Ryan S.; Asbell-Clarke, Jodi

    2015-01-01

    Educational games have the potential to be innovative forms of learning assessment, by allowing us to not just study their knowledge but the process that takes students to that knowledge. This paper examines the mediating role of players' moves in digital games on changes in their pre-post classroom measures of implicit science learning. We…

  14. Moving Feedback Forward: Theory to Practice

    Orsmond, Paul; Maw, Stephen J.; Park, Julian R.; Gomez, Stephen; Crook, Anne C.

    2013-01-01

    There is substantial research interest in tutor feedback and students' perception and use of such feedback. This paper considers some of the major issues raised in relation to tutor feedback and student learning. We explore some of the current feedback drivers, most notably the need for feedback to move away from simply a monologue from a tutor to…

  15. Clutter Moves in Old Age Homecare

    Lutz, Peter

    2010-01-01

    This chapter introduces the notion of clutter moves as an experimental heuristic for tracing how movement threads together a range of cluttered entities in old age homecare ecologies. In particular it is concerned with older people and their cluttered technologies. It is based on empirical data o...

  16. Moving frames for heart fiber geometry

    Piuze, Emmanuel; Sporring, Jon; Siddiqi, Kaleem

    2013-01-01

    fibers is central to our understanding of normal heart function. Motivated by a recent abstraction by Savadjiev et al. of heart wall fibers into generalized helicoid minimal surfaces, this paper develops an extension based on differential forms. The key idea is to use Maurer-Cartan’s method of moving...

  17. Moving UA5 into the beam

    1981-01-01

    The streamer chamber of UA5, which had been operating at the ISR until Easter, was installed in its platform, in ECA4 alongside the UA2 detector and in September was moved into the beam (this photo). See Annual Report 1981 p. 128.

  18. Assessing the Cartographic Visualization of Moving Objects ...

    Four representations are considered in this research: the single static map, multiple static maps, animation, and the space-time cube. The study is conducted by considering four movement characteristics (or aspects of moving objects): speed change, returns, stops, and path of movement. The ability of users to perceive and ...

  19. Performance of the Analog Moving Window Detector

    Hansen, V. Gregers

    1970-01-01

    A type of analog integrating moving window detector for use with a scanning pulse radar is examined. A performance analysis is carried out, which takes into account both the radiation pattern of the antenna and the dynamic character of the detection process due to the angular scanning...

  20. Moving Divertor Plates in a Tokamak

    S.J. Zweben, H. Zhang

    2009-02-12

    Moving divertor plates could help solve some of the problems of the tokamak divertor through mechanical ingenuity rather than plasma physics. These plates would be passively heated on each pass through the tokamak and cooled and reprocessed outside the tokamak. There are many design options using varying plate shapes, orientations, motions, coatings, and compositions.

  1. Moving Facts in an Arctic field

    Hastrup, Kirsten Blinkenberg; Flora, Janne; Andersen, Astrid Oberborbeck

    2016-01-01

    , and an engagement with other disciplinary practices. The gain of our cross-disciplinary experiment was therefore not only to know more about the makings of a particular landscape in a multi-disciplinary perspective, but also to understand how anthropology makes sense of inherently moving facts....

  2. Moving through time: the role of personality in three real-life contexts.

    Duffy, Sarah E; Feist, Michele I; McCarthy, Steven

    2014-01-01

    In English, two deictic space-time metaphors are in common usage: the Moving Ego metaphor conceptualizes the ego as moving forward through time and the Moving Time metaphor conceptualizes time as moving forward toward the ego (Clark, 1973). Although earlier research investigating the psychological reality of these metaphors has typically examined spatial influences on temporal reasoning (e.g., Boroditsky & Ramscar, 2002), recent lines of research have extended beyond this, providing initial evidence that personality differences and emotional experiences may also influence how people reason about events in time (Duffy & Feist, 2014; Hauser, Carter, & Meier, 2009; Richmond, Wilson, & Zinken, 2012). In this article, we investigate whether these relationships have force in real life. Building on the effects of individual differences in self-reported conscientiousness and procrastination found by Duffy and Feist (2014), we examined whether, in addition to self-reported conscientiousness and procrastination, there is a relationship between conscientious and procrastinating behaviors and temporal perspective. We found that participants who adopted the Moving Time perspective were more likely to exhibit conscientious behaviors, while those who adopted the Moving Ego perspective were more likely to procrastinate, suggesting that the earlier effects reach beyond the laboratory. Copyright © 2014 Cognitive Science Society, Inc.

  3. Identification of moving vehicle forces on bridge structures via moving average Tikhonov regularization

    Pan, Chu-Dong; Yu, Ling; Liu, Huan-Lin

    2017-08-01

    Traffic-induced moving force identification (MFI) is a typical inverse problem in the field of bridge structural health monitoring. Lots of regularization-based methods have been proposed for MFI. However, the MFI accuracy obtained from the existing methods is low when the moving forces enter into and exit a bridge deck due to low sensitivity of structural responses to the forces at these zones. To overcome this shortcoming, a novel moving average Tikhonov regularization method is proposed for MFI by combining with the moving average concepts. Firstly, the bridge-vehicle interaction moving force is assumed as a discrete finite signal with stable average value (DFS-SAV). Secondly, the reasonable signal feature of DFS-SAV is quantified and introduced for improving the penalty function (∣∣x∣∣2 2) defined in the classical Tikhonov regularization. Then, a feasible two-step strategy is proposed for selecting regularization parameter and balance coefficient defined in the improved penalty function. Finally, both numerical simulations on a simply-supported beam and laboratory experiments on a hollow tube beam are performed for assessing the accuracy and the feasibility of the proposed method. The illustrated results show that the moving forces can be accurately identified with a strong robustness. Some related issues, such as selection of moving window length, effect of different penalty functions, and effect of different car speeds, are discussed as well.

  4. Modeling and simulation of dust behaviors behind a moving vehicle

    Wang, Jingfang

    Simulation of physically realistic complex dust behaviors is a difficult and attractive problem in computer graphics. A fast, interactive and visually convincing model of dust behaviors behind moving vehicles is very useful in computer simulation, training, education, art, advertising, and entertainment. In my dissertation, an experimental interactive system has been implemented for the simulation of dust behaviors behind moving vehicles. The system includes physically-based models, particle systems, rendering engines and graphical user interface (GUI). I have employed several vehicle models including tanks, cars, and jeeps to test and simulate in different scenarios and conditions. Calm weather, winding condition, vehicle turning left or right, and vehicle simulation controlled by users from the GUI are all included. I have also tested the factors which play against the physical behaviors and graphics appearances of the dust particles through GUI or off-line scripts. The simulations are done on a Silicon Graphics Octane station. The animation of dust behaviors is achieved by physically-based modeling and simulation. The flow around a moving vehicle is modeled using computational fluid dynamics (CFD) techniques. I implement a primitive variable and pressure-correction approach to solve the three dimensional incompressible Navier Stokes equations in a volume covering the moving vehicle. An alternating- direction implicit (ADI) method is used for the solution of the momentum equations, with a successive-over- relaxation (SOR) method for the solution of the Poisson pressure equation. Boundary conditions are defined and simplified according to their dynamic properties. The dust particle dynamics is modeled using particle systems, statistics, and procedure modeling techniques. Graphics and real-time simulation techniques, such as dynamics synchronization, motion blur, blending, and clipping have been employed in the rendering to achieve realistic appearing dust

  5. 30 CFR 56.14107 - Moving machine parts.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Moving machine parts. 56.14107 Section 56.14107... Safety Devices and Maintenance Requirements § 56.14107 Moving machine parts. (a) Moving machine parts... takeup pulleys, flywheels, couplings, shafts, fan blades, and similar moving parts that can cause injury...

  6. Flux quanta, magnetic field lines, merging – some sub-microscale relations of interest in space plasma physics

    R. A. Treumann

    2011-06-01

    Full Text Available We clarify the notion of magnetic field lines in plasma by referring to sub-microscale (quantum mechanical particle dynamics. It is demonstrated that magnetic field lines in a field of strength B carry single magnetic flux quanta Φ0=h/e. The radius of a field line in the given magnetic field B is calculated. It is shown that such field lines can merge and annihilate only over the length ℓ∥ of their strictly anti-parallel sections, for which case we estimate the power generated. The length ℓ∥ becomes a function of the inclination angle θ of the two merging magnetic flux tubes (field lines. Merging is possible only in the interval 12πθ≤π. This provides a sub-microscopic basis for "component reconnection" in classical macro-scale reconnection. We also find that the magnetic diffusion coefficient in plasma appears in quanta D0m=eΦ0/me=h/me. This lets us conclude that the bulk perpendicular plasma resistivity is limited and cannot be less than η0⊥=μ0eΦ0/me=μ0h/me~10−9 Ohm m. This resistance is an invariant.

  7. Tech-Savvy Beef Cattle? How Heifers Respond to Moving Virtual Fence Lines

    Dana L.M. Campbell

    2017-09-01

    Full Text Available Global Positioning System (GPS-based virtual fences offer the potential to improve the management of grazing animals. Prototype collar devices utilising patented virtual fencing algorithms were placed on six Angus heifers in a 6.15 hectare paddock. After a “no fence” period, sequential, shifting virtual fences restricted the animals to 40%, 60%, and 80% of the paddock area widthways and 50% lengthways across 22 days. Audio cues signaled the virtual boundary, and were paired with electrical stimuli if the animals continued forward into the boundary. Within approximately 48 h, the cattle learned the 40% fence and were henceforth restricted to the subsequent inclusion zones a minimum of 96.70% (±standard error 0.01% of the time. Over time, the animals increasingly stayed within the inclusion zones using audio cues alone, and on average, approached the new fence within 4.25 h. The animals were thus attentive to the audio cue, not the fence location. The time spent standing and lying and the number of steps were similar between inclusion zones (all p ≥ 0.42. More lying bouts occurred at the 80% and lengthways inclusion zones relative to “no fence” (p = 0.04. Further research should test different cattle groups in variable paddock settings and measure physiological welfare responses to the virtual fencing stimuli.

  8. The Business Information Services: Old-Line Online Moves to the Web.

    O'Leary, Mick

    1997-01-01

    Although the availability of free information on the World Wide Web has placed traditional, fee-based proprietary online services on the defensive, most major online business services are now on the Web. Highlights several business information providers: Profound, NewsNet and ProQuest Direct, Dow Jones and Wall Street Journal Interactive Edition,…

  9. Moving beyond the Bar Plot and the Line Graph to Create Informative and Attractive Graphics

    Larson-Hall, Jenifer

    2017-01-01

    Graphics are often mistaken for a mere frill in the methodological arsenal of data analysis when in fact they can be one of the simplest and at the same time most powerful methods of communicating statistical information (Tufte, 2001). The first section of the article argues for the statistical necessity of graphs, echoing and amplifying similar…

  10. A gradient stable scheme for a phase field model for the moving contact line problem

    Gao, Min; Wang, Xiao-Ping

    2012-01-01

    [1,2,4]. The nonlinear version of the scheme is semi-implicit in time and is based on a convex splitting of the Cahn-Hilliard free energy (including the boundary energy) together with a projection method for the Navier-Stokes equations. We show, under

  11. Crossing the Line of Departure. Battle Command on the Move A Historical Perspective

    2006-01-01

    Madre mountains onto the Plateau of Anahuac to the town of Puebla, 70 miles short of Mexico City. There on 15 May, the army paused for reinforcements...initially fielded in 1960, was built on the M113 chas­ sis. It resembled the M113 except that it had a taller , 12 foot rear compartment and mounts for a

  12. Absorption line profiles in a moving atmosphere - A single scattering linear perturbation theory

    Hays, P. B.; Abreu, V. J.

    1989-01-01

    An integral equation is derived which linearly relates Doppler perturbations in the spectrum of atmospheric absorption features to the wind system which creates them. The perturbation theory is developed using a single scattering model, which is validated against a multiple scattering calculation. The nature and basic properties of the kernels in the integral equation are examined. It is concluded that the kernels are well behaved and that wind velocity profiles can be recovered using standard inversion techniques.

  13. A One Line Derivation of DCC: Application of a Vector Random Coefficient Moving Average Process

    C.M. Hafner (Christian); M.J. McAleer (Michael)

    2014-01-01

    markdownabstract__Abstract__ One of the most widely-used multivariate conditional volatility models is the dynamic conditional correlation (or DCC) specification. However, the underlying stochastic process to derive DCC has not yet been established, which has made problematic the derivation of

  14. Moving the Starting Line through Prior Learning Assessment (PLA). Research Brief

    Council for Adult and Experiential Learning (NJ1), 2011

    2011-01-01

    Prior learning assessment (PLA) methods can help adult students earn college credit for what they already know. PLA can be an important offering by postsecondary degree programs because it can save students time and money. In addition, the Council for Adult and Experiential Learning's (CAEL's) "Fueling the Race to Postsecondary Success"…

  15. Identifying New Members of Nearby Moving Groups

    Holmbeck, Erika; Vican, Laura

    2014-06-01

    Our group has assembled a sample of 14,000 stars of spectral types B9-M9 with measured UVW Galactic space velocities and lying within 125 pc of Earth. We have identified candidate members of three nearby young (less than 100 Myr) moving groups. For stars of spectral types G5 and later, we have used the Kast spectrometer on the Shane 3m telescope at Lick Observatory to measure lithium abundance in order to determine stellar ages. With the data we have obtained from this run, we will be able to establish whether our candidates are bona fide members of the moving groups in question. I will be presenting the preliminary results from this survey, including spectra of the ~50 stars observed thus far. These nearby young stars will make excellent targets for direct imaging followup surveys, since any giant planets around young stars will still be warm, and will therefore be bright enough to detect with instruments like GPI.

  16. Drop Impact on to Moving Liquid Pools

    Muñoz-Sánchez, Beatriz Natividad; Castrejón-Pita, José Rafael; Castrejón-Pita, Alfonso Arturo; Hutchings, Ian M.

    2014-11-01

    The deposition of droplets on to moving liquid substrates is an omnipresent situation both in nature and industry. A diverse spectrum of phenomena emerges from this simple process. In this work we present a parametric experimental study that discerns the dynamics of the impact in terms of the physical properties of the fluid and the relative velocity between the impacting drop and the moving liquid pool. The behaviour ranges from smooth coalescence (characterized by little mixing) to violent splashing (generation of multiple satellite droplets and interfacial vorticity). In addition, transitional regimes such as bouncing and surfing are also found. We classify the system dynamics and show a parametric diagram for the conditions of each regime. This work was supported by the EPSRC (Grant EP/H018913/1), the Royal Society, Becas Santander Universidades and the International Relationships Office of the University of Extremadura.

  17. Analysis of the Dose Distribution of Moving Organ using a Moving Phantom System

    Kim, Yon Lae; Park, Byung Moon; Bae, Yong Ki; Kang, Min Young; Bang, Dong Wan; Lee, Gui Won

    2006-01-01

    Few researches have been performed on the dose distribution of the moving organ for radiotherapy so far. In order to simulate the organ motion caused by respiratory function, multipurpose phantom and moving device was used and dosimetric measurements for dose distribution of the moving organs were conducted in this study. The purpose of our study was to evaluate how dose distributions are changed due to respiratory motion. A multipurpose phantom and a moving device were developed for the measurement of the dose distribution of the moving organ due to respiratory function. Acryl chosen design of the phantom was considered the most obvious choice for phantom material. For construction of the phantom, we used acryl and cork with density of 1.14 g/cm 3 , 0.32 g/cm 3 respectively. Acryl and cork slab in the phantom were used to simulate the normal organ and lung respectively. The moving phantom system was composed of moving device, moving control system, and acryl and cork phantom. Gafchromic film and EDR2 film were used to measure dose distributions. The moving device system may be driven by two directional step motors and able to perform 2 dimensional movements (x, z axis), but only 1 dimensional movement(z axis) was used for this study. Larger penumbra was shown in the cork phantom than in the acryl phantom. The dose profile and isodose curve of Gafchromic EBT film were not uniform since the film has small optical density responding to the dose. As the organ motion was increased, the blurrings in penumbra, flatness, and symmetry were increased. Most of measurements of dose distributions, Gafchromic EBT film has poor flatness and symmetry than EDR2 film, but both penumbra distributions were more or less comparable. The Gafchromic EBT film is more useful as it does not need development and more radiation dose could be exposed than EDR2 film without losing film characteristics. But as response of the optical density of Gafchromic EBT film to dose is low, beam profiles

  18. Nonholonomic feedback control among moving obstacles

    Armstrong, Stephen Gregory

    A feedback controller is developed for navigating a nonholonomic vehicle in an area with multiple stationary and possibly moving obstacles. Among other applications the developed algorithms can be used for automatic parking of a passenger car in a parking lot with complex configuration or a ground robot in cluttered environment. Several approaches are explored which combine nonholonomic systems control based on sliding modes and potential field methods.

  19. Culture as a Moving Symbolic Border.

    Simão, Lívia Mathias

    2016-03-01

    The aim of this paper is to propose the notion of culture as a symbolic moving border. Departing from both, Boesch's (1991) concept of culture as a symbolic field of action, and Herbst's (1995) co-genetic logic, I will discuss the dynamics of self-other relationships in terms of their potentiality as sources of movement in culture. A brief analysis of an empirical material is given in illustrative character of the ideas here exposed.

  20. The electromagnetic force between two moving charges

    Minkin, Leonid; Shapovalov, Alexander S.

    2018-05-01

    A simple model of parallel motion of two point charges and the subsequent analysis of the electromagnetic field transformation invariant quantity are considered. It is shown that ignoring the coupling of electric and magnetic fields, as is done in some introductory physics books, can lead to miscalculations of the force between moving charges. Conceptual and computational aspects of these issues are discussed, and implications to the design of electron beam devices are considered.

  1. Spark formation as a moving boundary process

    Ebert, Ute

    2006-03-01

    The growth process of spark channels recently becomes accessible through complementary methods. First, I will review experiments with nanosecond photographic resolution and with fast and well defined power supplies that appropriately resolve the dynamics of electric breakdown [1]. Second, I will discuss the elementary physical processes as well as present computations of spark growth and branching with adaptive grid refinement [2]. These computations resolve three well separated scales of the process that emerge dynamically. Third, this scale separation motivates a hierarchy of models on different length scales. In particular, I will discuss a moving boundary approximation for the ionization fronts that generate the conducting channel. The resulting moving boundary problem shows strong similarities with classical viscous fingering. For viscous fingering, it is known that the simplest model forms unphysical cusps within finite time that are suppressed by a regularizing condition on the moving boundary. For ionization fronts, we derive a new condition on the moving boundary of mixed Dirichlet-Neumann type (φ=ɛnφ) that indeed regularizes all structures investigated so far. In particular, we present compact analytical solutions with regularization, both for uniformly translating shapes and for their linear perturbations [3]. These solutions are so simple that they may acquire a paradigmatic role in the future. Within linear perturbation theory, they explicitly show the convective stabilization of a curved front while planar fronts are linearly unstable against perturbations of arbitrary wave length. [1] T.M.P. Briels, E.M. van Veldhuizen, U. Ebert, TU Eindhoven. [2] C. Montijn, J. Wackers, W. Hundsdorfer, U. Ebert, CWI Amsterdam. [3] B. Meulenbroek, U. Ebert, L. Schäfer, Phys. Rev. Lett. 95, 195004 (2005).

  2. BKSTS illustrated dictionary of moving image technology

    Uren, Martin

    2013-01-01

    The fourth edition of the BKSTS dictionary provides clear and concise explanations of the terminology and acronyms encountered in the broadcasting and moving image industries.Convergence of these industries means that those practising within them are increasingly faced with unfamiliar terminology. Martin Uren has reflected this change in his extended choice of industry terms, acronyms and colloquialisms. He provides:- Over 3300 definitions covering film, television, sound and multimedia technologies, together with technical terms from the computing, networks and telecommunications industries.-

  3. Moving object detection using background subtraction

    Shaikh, Soharab Hossain; Chaki, Nabendu

    2014-01-01

    This Springer Brief presents a comprehensive survey of the existing methodologies of background subtraction methods. It presents a framework for quantitative performance evaluation of different approaches and summarizes the public databases available for research purposes. This well-known methodology has applications in moving object detection from video captured with a stationery camera, separating foreground and background objects and object classification and recognition. The authors identify common challenges faced by researchers including gradual or sudden illumination change, dynamic bac

  4. Moving backwards, moving forward: the experiences of older Filipino migrants adjusting to life in New Zealand

    Montayre, Jed; Neville, Stephen; Holroyd, Eleanor

    2017-01-01

    ABSTRACT Purpose: To explore the experiences of older Filipino migrants adjusting to living permanently in New Zealand. Method: The qualitative descriptive approach taken in this study involved 17 individual face-to-face interviews of older Filipino migrants in New Zealand. Results: Three main themes emerged from the data. The first theme was ?moving backwards and moving forward?, which described how these older Filipino migrants adjusted to challenges they experienced with migration. The sec...

  5. VT Electric Transmission Line Corridors - corridor lines

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  6. Moving data to nursing quality excellence.

    Rees, Susan; Leahy-Gross, Kristine; Mack, Valerie

    2011-01-01

    Data must make their way to front line staff if performance improvement efforts are to be successful and sustainable. The steps of focus, display, distribute, and reward may be used as a process to ensure that data are delivered to and used by the front line staff. The focus on specific key measures, with subsequent consistent display and distribution, had a positive impact on the selected measures. Rewarding units with annual awards further encouraged staff to improve on important nurse-sensitive measures.

  7. High-speed video capillaroscopy method for imaging and evaluation of moving red blood cells

    Gurov, Igor; Volkov, Mikhail; Margaryants, Nikita; Pimenov, Aleksei; Potemkin, Andrey

    2018-05-01

    The video capillaroscopy system with high image recording rate to resolve moving red blood cells with velocity up to 5 mm/s into a capillary is considered. Proposed procedures of the recorded video sequence processing allow evaluating spatial capillary area, capillary diameter and central line with high accuracy and reliability independently on properties of individual capillary. Two-dimensional inter frame procedure is applied to find lateral shift of neighbor images in the blood flow area with moving red blood cells and to measure directly the blood flow velocity along a capillary central line. The developed method opens new opportunities for biomedical diagnostics, particularly, due to long-time continuous monitoring of red blood cells velocity into capillary. Spatio-temporal representation of capillary blood flow is considered. Experimental results of direct measurement of blood flow velocity into separate capillary as well as capillary net are presented and discussed.

  8. Homotopic Polygonal Line Simplification

    Deleuran, Lasse Kosetski

    This thesis presents three contributions to the area of polygonal line simplification, or simply line simplification. A polygonal path, or simply a path is a list of points with line segments between the points. A path can be simplified by morphing it in order to minimize some objective function...

  9. Proton Exchange Membrane Fuel Cell Modelling Using Moving Least Squares Technique

    Radu Tirnovan

    2009-07-01

    Full Text Available Proton exchange membrane fuel cell, with low polluting emissions, is a great alternative to replace the traditional electrical power sources for automotive applications or for small stationary consumers. This paper presents a numerical method, for the fuel cell modelling, based on moving least squares (MLS. Experimental data have been used for developing an approximated model of the PEMFC function of the current density, air inlet pressure and operating temperature of the fuel cell. The method can be applied for modelling others fuel cell sub-systems, such as the compressor. The method can be used for off-line or on-line identification of the PEMFC stack.

  10. The Kerr geometry, complex world lines and hyperbolic strings

    Burinskii, A.Ya.

    1994-01-01

    In the Lind-Newman representation the Kerr geometry is created by a source moving along an analytical complex world line. An equivalence of the complex world line and complex (hyperbolic) string is considered. Therefore the hyperbolic string may play the role of the complex source of the Kerr geometry. The Kerr solution with the complex string source acquires Regge behavior of the angular momentum. (orig.)

  11. Study of the four identical particle spectrum moving in one dimension

    Conceicao, E.M.F. da.

    1986-01-01

    Technical details of the application of the hyperspherical harmonics method are investigated for the problem of four identical particles moving in one line. First of all, the states of the system are classified according theirs invariance properties, following the S 4 group and parity. As follows, the structure of the radial differential equations is investigated in lower order. From the result of this investigation, becauses clear how to treat with higher orders. (L.C.) [pt

  12. ASSEMBLY LINE BALANCING in a CLOTHING COMPANY

    HASNALCACI Kubra

    2017-05-01

    Full Text Available Assembly lines take the attention of researchers and companies because of its great effect on efficiency. Efficiency in assembly lines has an important role on cost and quality which are the basic fundamentals of competition. Assembly lines contain a number of workstations and tasks (jobs are processed in these stations and are moved from station to station. The tasks are assigned to each station regarding a cycle time. The cycle time is the maximum available time for the production of a job at any workstation. The assingning of jobs to workstations is based on the objective of minimizing the workflow among the workstations, reducing the throughput time as well as the work in progress and thus increasing productivity. If the jobs are not allocated in balance, this will cause idle workstations and waste of workforce besides the loss of overall efficiency. In this study, an assebly line balancing problem was examined for a five pocket denim trousers in a clothing company. Firstly, priority associations and standard durations of operations of denim trousers were determined. Then, assembly line balancing study was carried out by using ranked positional weights assembly line balancing method developed by Helgeson and Birnie to increase the production in a clothing company manufacturing five pocket denim trousers.

  13. Improved moving source photometry with TRIPPy

    Alexandersen, Mike; Fraser, Wesley Cristopher

    2017-10-01

    Photometry of moving sources is more complicated than for stationary sources, because the sources trail their signal out over more pixels than a point source of the same magnitude. Using a circular aperture of same size as would be appropriate for point sources can cut out a large amount of flux if a moving source moves substantially relative to the size of the aperture during the exposure, resulting in underestimated fluxes. Using a large circular aperture can mitigate this issue at the cost of a significantly reduced signal to noise compared to a point source, as a result of the inclusion of a larger background region within the aperture.Trailed Image Photometry in Python (TRIPPy) solves this problem by using a pill-shaped aperture: the traditional circular aperture is sliced in half perpendicular to the direction of motion and separated by a rectangle as long as the total motion of the source during the exposure. TRIPPy can also calculate the appropriate aperture correction (which will depend both on the radius and trail length of the pill-shaped aperture), and has features for selecting good PSF stars, creating a PSF model (convolved moffat profile + lookup table) and selecting a custom sky-background area in order to ensure no other sources contribute to the background estimate.In this poster, we present an overview of the TRIPPy features and demonstrate the improvements resulting from using TRIPPy compared to photometry obtained by other methods with examples from real projects where TRIPPy has been implemented in order to obtain the best-possible photometric measurements of Solar System objects. While TRIPPy has currently mainly been used for Trans-Neptunian Objects, the improvement from using the pill-shaped aperture increases with source motion, making TRIPPy highly relevant for asteroid and centaur photometry as well.

  14. The body talks, moves and acquires identity

    Nina Calero; Adelaida Carreño

    2014-01-01

    The body is the main communication tool in the child, gesture and posture of those around you let you understand their environment; from birth the child begins a process of self-recognition to be strengthened in different social spheres from personal experiences, as the emission of sounds with your body, body language and play a fundamental part of your child’s condition.For the child to move in the surrounding medium is what is the most important, as this experience allows the child not only...

  15. Painful legs and moving toes syndrome

    Qiu-ying Ma

    2015-10-01

    Full Text Available Painful legs and moving toes syndrome (PLMT is a rare movement disorder with low diagnostic rate, which is characterized by lower limb pain with involuntary movements of feet or toes. Etiology and pathogenesis of this disease is still unclear. Patients have different clinical manifestations, so the diagnosis is difficult. Treatment methods for PLMT are numerous, but so far the treatment of this disease is still a major challenge for clinicians. Further research is still needed to guide clinical work. DOI: 10.3969/j.issn.1672-6731.2015.10.013

  16. On signaling games with quantum chance move

    Frackiewicz, Piotr

    2015-01-01

    We give formal conditions for a perfect Bayesian-type equilibrium in a quantum signaling game. We show that the conditions imply a classical perfect Bayesian equilibrium if the quantum game coincides with the classical one. Next, we extend the signaling game to include a quantum chance move. We prove that the classical relation between Nash equilibria and perfect Bayesian equilibria is preserved in that case—every perfect Bayesian-type equilibrium implies a Nash equilibrium, but the converse is not true. Lastly, we give a condition for equivalence between Nash equilibria and perfect Bayesian-type equilibria. (paper)

  17. Tests to Help Plan Opportunity Moves

    2005-01-01

    Rover engineers check how a test rover moves in material chosen to simulate some difficult Mars driving conditions. The scene is inside the In-Situ Instrument Laboratory at NASA's Jet Propulsion Laboratory, Pasadena, Calif. These tests in early May 2005 were designed to help plan the best way for the rover Opportunity to drive off of a soft-sand dune that the rover dug itself into the previous week. The mixture of sandy and powdery material brought in for these specific tests matched the way the soil underneath Opportunity caked onto wheels, filling the spaces between the cleats on the wheels.

  18. Compressor Has No Moving Macroscopic Parts

    Gasser, Max

    1995-01-01

    Compressor containing no moving macroscopic parts functions by alternating piston and valve actions of successive beds of magnetic particles. Fabricated easily because no need for precisely fitting parts rotating or sliding on each other. Also no need for lubricant fluid contaminating fluid to be compressed. Compressor operates continuously, eliminating troublesome on/off cycling of other compressors, and decreasing consumption of energy. Phased cells push fluid from bottom to top, adding increments of pressure. Each cell contains magnetic powder particles loose when electromagnet coil deenergized, but tightly packed when coil energized.

  19. Computing proton dose to irregularly moving targets

    Phillips, Justin; Gueorguiev, Gueorgui; Grassberger, Clemens; Dowdell, Stephen; Paganetti, Harald; Sharp, Gregory C; Shackleford, James A

    2014-01-01

    Purpose: While four-dimensional computed tomography (4DCT) and deformable registration can be used to assess the dose delivered to regularly moving targets, there are few methods available for irregularly moving targets. 4DCT captures an idealized waveform, but human respiration during treatment is characterized by gradual baseline shifts and other deviations from a periodic signal. This paper describes a method for computing the dose delivered to irregularly moving targets based on 1D or 3D waveforms captured at the time of delivery. Methods: The procedure uses CT or 4DCT images for dose calculation, and 1D or 3D respiratory waveforms of the target position at time of delivery. Dose volumes are converted from their Cartesian geometry into a beam-specific radiological depth space, parameterized in 2D by the beam aperture, and longitudinally by the radiological depth. In this new frame of reference, the proton doses are translated according to the motion found in the 1D or 3D trajectory. These translated dose volumes are weighted and summed, then transformed back into Cartesian space, yielding an estimate of the dose that includes the effect of the measured breathing motion. The method was validated using a synthetic lung phantom and a single representative patient CT. Simulated 4DCT was generated for the phantom with 2 cm peak-to-peak motion. Results: A passively-scattered proton treatment plan was generated using 6 mm and 5 mm smearing for the phantom and patient plans, respectively. The method was tested without motion, and with two simulated breathing signals: a 2 cm amplitude sinusoid, and a 2 cm amplitude sinusoid with 3 cm linear drift in the phantom. The tumor positions were equally weighted for the patient calculation. Motion-corrected dose was computed based on the mid-ventilation CT image in the phantom and the peak exhale position in the patient. Gamma evaluation was 97.8% without motion, 95.7% for 2 cm sinusoidal motion, 95.7% with 3 cm drift in

  20. Computational cameras for moving iris recognition

    McCloskey, Scott; Venkatesha, Sharath

    2015-05-01

    Iris-based biometric identification is increasingly used for facility access and other security applications. Like all methods that exploit visual information, however, iris systems are limited by the quality of captured images. Optical defocus due to a small depth of field (DOF) is one such challenge, as is the acquisition of sharply-focused iris images from subjects in motion. This manuscript describes the application of computational motion-deblurring cameras to the problem of moving iris capture, from the underlying theory to system considerations and performance data.

  1. Shadowfax: Moving mesh hydrodynamical integration code

    Vandenbroucke, Bert

    2016-05-01

    Shadowfax simulates galaxy evolution. Written in object-oriented modular C++, it evolves a mixture of gas, subject to the laws of hydrodynamics and gravity, and any collisionless fluid only subject to gravity, such as cold dark matter or stars. For the hydrodynamical integration, it makes use of a (co-) moving Lagrangian mesh. The code has a 2D and 3D version, contains utility programs to generate initial conditions and visualize simulation snapshots, and its input/output is compatible with a number of other simulation codes, e.g. Gadget2 (ascl:0003.001) and GIZMO (ascl:1410.003).

  2. Nasca Lines: A Mystery wrapped in an Enigma

    Pita, J. R. Castrejon; Pita, A. A. Castrejon; Galan, A. Sarmiento; Garcia, R. Castrejon

    2003-01-01

    We analyze the geometrical structure of the astonishing Nasca geoglyphs in terms of their fractal dimension with the idea of dating these manifestations of human cultural engagements in relation to one another. Our findings suggest that the first delineated images consist of straight, parallel lines and that having sophisticated their abilities, Nasca artist moved on to the design of more complex structures.

  3. Nasca lines: A mystery wrapped in an enigma

    Castrejón-Pita, J. R.; Castrejón-Pita, A. A.; Sarmiento-Galán, A.; Castrejón-García, R.

    2003-09-01

    We analyze the geometrical structure of the astonishing Nasca geoglyphs in terms of their fractal dimension with the idea of dating these manifestations of human cultural engagements in relation to one another. Our findings suggest that the first delineated images consist of straight, parallel lines and that having sophisticated their abilities, the Nasca artists moved on to the design of more complex structures.

  4. Moving backwards, moving forward: the experiences of older Filipino migrants adjusting to life in New Zealand.

    Montayre, Jed; Neville, Stephen; Holroyd, Eleanor

    2017-12-01

    To explore the experiences of older Filipino migrants adjusting to living permanently in New Zealand. The qualitative descriptive approach taken in this study involved 17 individual face-to-face interviews of older Filipino migrants in New Zealand. Three main themes emerged from the data. The first theme was "moving backwards and moving forward", which described how these older Filipino migrants adjusted to challenges they experienced with migration. The second theme was "engaging with health services" and presented challenges relating to the New Zealand healthcare system, including a lack of knowledge of the nature of health services, language barriers, and differences in cultural views. The third theme, "new-found home", highlighted establishing a Filipino identity in New Zealand and adjusting to the challenges of relocation. Adjustment to life in New Zealand for these older Filipino migrants meant starting over again by building new values through learning the basics and then moving forward from there.

  5. The electromagnetic field equations for moving media

    Ivezić, T

    2017-01-01

    In this paper a formulation of the field equation for moving media is developed by the generalization of an axiomatic geometric formulation of the electromagnetism in vacuum (Ivezić T 2005 Found. Phys. Lett. 18 401). First, the field equations with bivectors F ( x ) and ℳ ( x ) are presented and then these equations are written with the 4D vectors E ( x ), B ( x ), P ( x ) and M ( x ). The latter contain both the 4D velocity vector u of a moving medium and the 4D velocity vector v of the observers who measure E and B fields. They do not appear in previous literature. All these equations are also written in the standard basis and compared with Maxwell’s equations with 3D vectors. In this approach the Ampère-Maxwell law and Gauss’s law are inseparably connected in one law and the same happens with Faraday’s law and the law that expresses the absence of magnetic charge. It is shown that Maxwell’s equations with 3D vectors and the field equations with 4D geometric quantities are not equivalent in 4D spacetime (paper)

  6. A Generalized Wave Diagram for Moving Sources

    Alt, Robert; Wiley, Sam

    2004-12-01

    Many introductory physics texts1-5 accompany the discussion of the Doppler effect and the formation of shock waves with diagrams illustrating the effect of a source moving through an elastic medium. Typically these diagrams consist of a series of equally spaced dots, representing the location of the source at different times. These are surrounded by a series of successively smaller circles representing wave fronts (see Fig. 1). While such a diagram provides a clear illustration of the shock wave produced by a source moving at a speed greater than the wave speed, and also the resultant pattern when the source speed is less than the wave speed (the Doppler effect), the texts do not often show the details of the construction. As a result, the key connection between the relative distance traveled by the source and the distance traveled by the wave is not explicitly made. In this paper we describe an approach emphasizing this connection that we have found to be a useful classroom supplement to the usual text presentation. As shown in Fig. 2 and Fig. 3, the Doppler effect and the shock wave can be illustrated by diagrams generated by the construction that follows.

  7. Minefield overwatch using moving target indicator radar

    Donadio, Anthony; Ewing, Robert; Kenneally, William J.; Santapietro, John J.

    1999-07-01

    Traditional antipersonnel land mines are an effective military tool, but they are unable to distinguish friend from foe, or civilian from military personnel. The concept described here uses an advanced moving target indicator (MTI) radar to scan the minefield in order to detect movement towards or within the minefield, coupled with visual identification by a human operator and a communication link for command and control. Selected mines in the minefield can then be activated by means of the command link. In order to demonstrate this concept, a 3D, interactive simulation has been developed. This simulation builds on previous work by integrating a detailed analytical model of an MTI radar. This model has been tailored to the specific application of detection of slowly moving dismounted entities immersed in ground clutter. The model incorporates the effects of internal scatterer motion and antenna scanning modulation in order to provide a realistic representation of the detection problem in this environment. The angle information on the MTI target detection is then passed to a virtual 3D sight which cues a human operator to the target location. In addition, radar propagation effects and an experimental design in which the radar itself is used as a command link are explored.

  8. Moved range monitor of a refueling machine

    Nakajima, Masaaki; Sakanaka, Tadao; Kayano, Hiroyuki.

    1976-01-01

    Purpose: To incorporate light receiving and emitting elements in a face monitor to thereby increase accuracy and reliability to facilitate handling in the refueling of a BWR power plant. Constitution: In the present invention, a refueling machine and a face monitoring light receiving and emitting elements are analogously coupled whereby the face monitoring light receiving and emitting elements may be moved so as to be analogous to a route along which the refueling machine has moved. A shielding plate is positioned in the middle of the light receiving and emitting elements, and the shielding plate is machined so as to be outside of action. The range of action of the refueling machine may be monitored depending on the light receiving state of the light receiving element. Since the present invention utilizes the permeating light as described above, it is possible to detect positions more accurately than the mechanical switch. In addition, the detection section is of the non-contact system and the light receiving element comprises a hot cell, and therefore the service life is extended and the reliability is high. (Nakamura, S.)

  9. Hybrid Heat Capacity - Moving Slab Laser Concept

    Stappaerts, E A

    2002-01-01

    A hybrid configuration of a heat capacity laser (HCL) and a moving slab laser (MSL) has been studied. Multiple volumes of solid-state laser material are sequentially diode-pumped and their energy extracted. When a volume reaches a maximum temperature after a ''sub-magazine depth'', it is moved out of the pumping region into a cooling region, and a new volume is introduced. The total magazine depth equals the submagazine depth times the number of volumes. The design parameters are chosen to provide high duty factor operation, resulting in effective use of the diode arrays. The concept significantly reduces diode array cost over conventional heat capacity lasers, and it is considered enabling for many potential applications. A conceptual design study of the hybrid configuration has been carried out. Three concepts were evaluated using CAD tools. The concepts are described and their relative merits discussed. Because of reduced disk size and diode cost, the hybrid concept may allow scaling to average powers on the order of 0.5 MW/module

  10. Deciphering interactions in moving animal groups.

    Jacques Gautrais

    Full Text Available Collective motion phenomena in large groups of social organisms have long fascinated the observer, especially in cases, such as bird flocks or fish schools, where large-scale highly coordinated actions emerge in the absence of obvious leaders. However, the mechanisms involved in this self-organized behavior are still poorly understood, because the individual-level interactions underlying them remain elusive. Here, we demonstrate the power of a bottom-up methodology to build models for animal group motion from data gathered at the individual scale. Using video tracks of fish shoal in a tank, we show how a careful, incremental analysis at the local scale allows for the determination of the stimulus/response function governing an individual's moving decisions. We find in particular that both positional and orientational effects are present, act upon the fish turning speed, and depend on the swimming speed, yielding a novel schooling model whose parameters are all estimated from data. Our approach also leads to identify a density-dependent effect that results in a behavioral change for the largest groups considered. This suggests that, in confined environment, the behavioral state of fish and their reaction patterns change with group size. We debate the applicability, beyond the particular case studied here, of this novel framework for deciphering interactions in moving animal groups.

  11. Cooperative Robots to Observe Moving Targets: Review.

    Khan, Asif; Rinner, Bernhard; Cavallaro, Andrea

    2018-01-01

    The deployment of multiple robots for achieving a common goal helps to improve the performance, efficiency, and/or robustness in a variety of tasks. In particular, the observation of moving targets is an important multirobot application that still exhibits numerous open challenges, including the effective coordination of the robots. This paper reviews control techniques for cooperative mobile robots monitoring multiple targets. The simultaneous movement of robots and targets makes this problem particularly interesting, and our review systematically addresses this cooperative multirobot problem for the first time. We classify and critically discuss the control techniques: cooperative multirobot observation of multiple moving targets, cooperative search, acquisition, and track, cooperative tracking, and multirobot pursuit evasion. We also identify the five major elements that characterize this problem, namely, the coordination method, the environment, the target, the robot and its sensor(s). These elements are used to systematically analyze the control techniques. The majority of the studied work is based on simulation and laboratory studies, which may not accurately reflect real-world operational conditions. Importantly, while our systematic analysis is focused on multitarget observation, our proposed classification is useful also for related multirobot applications.

  12. Moving mirrors, black holes, and cosmic censorship

    Ford, L.H.; Roman, T.A.

    1990-01-01

    We examine negative-energy fluxes produced by mirrors moving in two-dimensional charged-black-hole backgrounds. If there exist no constraints on such fluxes, then one might be able to manipulate them to achieve a violation of cosmic censorship by shooting a negative-energy flux into an extreme Q=M or near-extreme Reissner-Nordstroem black hole. However, if the magnitude of the change in the mass of the hole |ΔM|, resulting from the absorption of this flux, is small compared to the normal quantum uncertainty in the mass expected from the uncertainty principle ΔEΔT≥1, then such changes should not be macroscopically observable. We argue that, given certain (physically reasonable) restrictions on the trajectory of the mirror, this indeed seems to be the case. More specifically, we show that |ΔM| and ΔT, the ''effective lifetime'' of any naked singularity thus produced, are limited by an inequality of the form |ΔM|ΔT<1. We then conclude that the negative-energy fluxes produced by two-dimensional moving mirrors do not lead to a classically observable violation of cosmic censorship

  13. Girls Thrive Emotionally, Boys Falter After Move to Better Neighborhood

    ... HIV/AIDS (6 items) Institute Announcements (54 items) Girls Thrive Emotionally, Boys Falter After Move to Better ... Policy March 11, 2014 • Science Update JAMA Video Girls in public housing benefited emotionally from a move ...

  14. Directed line liquids

    Kamien, R.D.

    1992-01-01

    This thesis is devoted to the study of ensembles of dense directed lines. These lines are principally to be thought of as polymers, though they also have the morphology of flux lines in high temperature superconductors, strings of colloidal spheres in electrorheological fluids and the world lines of quantum mechanical bosons. The authors discuss how directed polymer melts, string-like formations in electrorheological and ferro-fluids, flux lines in high temperature superconductors and the world lines of quantum mechanical bosons all share similar descriptions. They study a continuous transition in all of these systems, and then study the critical mixing properties of binary mixtures of directed polymers through the renormalization group. They predict the exponents for a directed polymer blend consolute point and a novel two-phase superfluid liquid-gas critical point

  15. Series Transmission Line Transformer

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  16. Spatio-Temporal Queries for moving objects Data warehousing

    Esheiba, Leila; Mokhtar, Hoda M. O.; El-Sharkawi, Mohamed

    2013-01-01

    In the last decade, Moving Object Databases (MODs) have attracted a lot of attention from researchers. Several research works were conducted to extend traditional database techniques to accommodate the new requirements imposed by the continuous change in location information of moving objects. Managing, querying, storing, and mining moving objects were the key research directions. This extensive interest in moving objects is a natural consequence of the recent ubiquitous location-aware device...

  17. Covariant electromagnetic field lines

    Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.

    2017-08-01

    Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.

  18. Overview of The Pulse Line Ion Accelerator

    Briggs, R.J.; Bieniosek, F.M.; Coleman, J.E.; Eylon, S.; Henestroza, E.; Leitner, M.; Logan, B.G.; Reginato, L.L.; Roy, P.K.; Seidl, P.A.; Waldron, W.L.; Yu, S.S.; Barnard, J.J.; Caporaso, G.J.; Friedman, A.; Grote, D.P.; Nelson, S.D.

    2006-01-01

    An overview of the Pulse Line Ion Accelerator (PLIA) concept and its development is presented. In the PLIA concept a pulse power driver applied to one end of a helical pulse line creates a traveling wave pulse that accelerates and axially confines a heavy ion beam pulse The motivation for its development at the IFE-VNL is the acceleration of intense, short pulse, heavy ion beams to regimes of interest for studies of High Energy Density Physics and Warm Dense Matter. Acceleration scenarios with constant parameter helical lines are described which result in output energies of a single stage much larger than the several hundred kilovolt peak voltages on the line, with a goal of 3-5 MeV/meter acceleration gradients. The main attraction of the concept is the very low cost it promises. It might be described crudely as an ''air core'' induction linac where the pulse-forming network is integrated into the beam line so the accelerating voltage pulse can move along with the ions to get voltage multiplication

  19. Moving House for Education in the Pre-School Years

    Hansen, Kirstine

    2014-01-01

    This paper uses data from the Millennium Cohort Study (MCS) to examine house moves that take place in the pre-school years, focusing on families who move for the education of their children. We present results showing that education- related house moves do indeed occur in the pre-school years with particular types of parents making these…

  20. 30 CFR 57.14107 - Moving machine parts.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Moving machine parts. 57.14107 Section 57.14107... Equipment Safety Devices and Maintenance Requirements § 57.14107 Moving machine parts. (a) Moving machine parts shall be guarded to protect persons from contacting gears, sprockets, chains, drive, head, tail...

  1. Adaptive moving mesh methods for simulating one-dimensional groundwater problems with sharp moving fronts

    Huang, W.; Zheng, Lingyun; Zhan, X.

    2002-01-01

    Accurate modelling of groundwater flow and transport with sharp moving fronts often involves high computational cost, when a fixed/uniform mesh is used. In this paper, we investigate the modelling of groundwater problems using a particular adaptive mesh method called the moving mesh partial differential equation approach. With this approach, the mesh is dynamically relocated through a partial differential equation to capture the evolving sharp fronts with a relatively small number of grid points. The mesh movement and physical system modelling are realized by solving the mesh movement and physical partial differential equations alternately. The method is applied to the modelling of a range of groundwater problems, including advection dominated chemical transport and reaction, non-linear infiltration in soil, and the coupling of density dependent flow and transport. Numerical results demonstrate that sharp moving fronts can be accurately and efficiently captured by the moving mesh approach. Also addressed are important implementation strategies, e.g. the construction of the monitor function based on the interpolation error, control of mesh concentration, and two-layer mesh movement. Copyright ?? 2002 John Wiley and Sons, Ltd.

  2. Partner (dis)agreement on moving desires and the subsequent moving behaviour of couples

    Coulter, R.; Van Ham, M.; Feijten, P.

    2011-01-01

    Most studies of residential mobility decision-making focus on the housing and neighbourhood satisfaction and pre-move thoughts of individuals. This implicitly assumes that individual evaluations represent the wider household unit. However, if partners in a couple do not share evaluations of dwelling

  3. 9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

    2010-01-01

    ... between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... establishment to another official establishment, for further processing, in a railroad car, truck, or other closed container, if the railroad car, truck, or container is sealed with an official seal of the...

  4. Moving carbonation fronts in concrete: a moving-sharp-interface approach

    Muntean, A.; Böhm, M.; Kropp, J.

    2011-01-01

    We present a new modeling strategy for predicting the penetration of carbonation reaction fronts in concrete. The approach relies on the assumption that carbonation reaction concentrates macroscopically on an a priori unknown narrow strip (called reaction front) moving into concrete gradually

  5. 25 CFR 700.157 - Actual reasonable moving and related expenses-nonresidential moves.

    2010-04-01

    ... of § 700.151(c) a certified eligible business, farm operation or nonprofit organization is entitled...-moves his business, farm operation, or nonprofit organization, the Commission may approve a payment for... and modifications necessary to adapt such property to the replacement structure or to the utilities or...

  6. Rapidly Moving Divertor Plates In A Tokamak

    Zweben, S.

    2011-01-01

    It may be possible to replace conventional actively cooled tokamak divertor plates with a set of rapidly moving, passively cooled divertor plates on rails. These plates would absorb the plasma heat flux with their thermal inertia for ∼10-30 sec, and would then be removed from the vessel for processing. When outside the tokamak, these plates could be cooled, cleaned, recoated, inspected, and then returned to the vessel in an automated loop. This scheme could provide nearoptimal divertor surfaces at all times, and avoid the need to stop machine operation for repair of damaged or eroded plates. We describe various possible divertor plate designs and access geometries, and discuss an initial design for a movable and removable divertor module for NSTX-U.

  7. Measuring coating thicknesses on continuously moving material

    Holler, J.H.; Stanton, W.B.; Spongr, J.J.; Joffe, B.B.; Raffelsberger, P.W.; Tiebor, J.E.

    1982-01-01

    A method and apparatus using radiation techniques for measuring coating thicknesses on continuously moving strip material without altering a predetermined path along which it travels. A shuttle carrying a measuring probe having a radioactive isotope source and a detection device is provided for reciprocation along a preselected segment of the path of the strip. The shuttle and the probe are releasably engaged with the strip and carried thereby for synchronous movement therewith in the forward direction during a measurement cycle, and are disengaged from the strip when no measurement is being made, the movement of the shuttle then being controlled by an independent drive mechanism, shown as a belt drive, which reciprocates the shuttle along the rails. A belt drives it forward more slowly than the strip, which then engages the shuttle to pull it at strip speed, allowed by a pulley clutch. (author)

  8. Move! Eat better: try the FIT formula

    CERN Medical Service

    2013-01-01

    In the physics world, some formulas lead to a Nobel prize. In the world of health and physical activity, the Medical Service also has a winning formula...   FIT (physical activity) =       Frequency x Intensity x Time Frequency = more than 3 times per week. Intensity = physical activity which slightly increases your heart rate and breathing rate. Time = more than 30 minutes (per session). As part of our Move! Eat better campaign, the Medical Service is still offering the use of a pedometer (available on loan from the infirmary), which is a really useful tool to help you reach the winning FIT formula. Interested in borrowing a CERN pedometer?  Click here!

  9. Moving Magnetic Features Around a Pore

    Kaithakkal, A. J.; Riethmüller, T. L.; Solanki, S. K.; Lagg, A.; Barthol, P.; Gandorfer, A.; Gizon, L.; Hirzberger, J.; VanNoort, M. [Max Planck Institute for Solar System Research, Justus-von-Liebig-Weg 3, Göttingen D-37077 (Germany); Rodríguez, J. Blanco [Grupo de Astronomía y Ciencias del Espacio, Universidad de Valencia, E-46980 Paterna, Valencia (Spain); Iniesta, J. C. Del Toro; Suárez, D. Orozco [Instituto de Astrofísica de Andalucía (CSIC), Apartado de Correos 3004, E-18080 Granada (Spain); Schmidt, W. [Kiepenheuer-Institut für Sonnenphysik, Schöneckstr. 6, D-79104 Freiburg (Germany); Pillet, V. Martínez [National Solar Observatory, 3665 Discovery Drive, Boulder, CO 80303 (United States); Knölker, M., E-mail: anjali@mps.mpg.de [High Altitude Observatory, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307-3000 (United States)

    2017-03-01

    Spectropolarimetric observations from Sunrise/IMaX, obtained in 2013 June, are used for a statistical analysis to determine the physical properties of moving magnetic features (MMFs) observed near a pore. MMFs of the same and opposite polarity, with respect to the pore, are found to stream from its border at an average speed of 1.3 km s{sup −1} and 1.2 km s{sup −1}, respectively, with mainly same-polarity MMFs found further away from the pore. MMFs of both polarities are found to harbor rather weak, inclined magnetic fields. Opposite-polarity MMFs are blueshifted, whereas same-polarity MMFs do not show any preference for up- or downflows. Most of the MMFs are found to be of sub-arcsecond size and carry a mean flux of ∼1.2 × 10{sup 17} Mx.

  10. Moving forward research agendas on international NGOS

    Opoku-Mensah, Paul Yaw; Lewis, David

    2006-01-01

    This paper sates out an argument for moving forwrd research on non-governmental organisations (NGOs)within development studies. The body of research on NGOs that emerged from the late 1980s onwards focused primarily on NGO roles as development actors and their organisational attributes, but pais ...... less attention to theory and context. While such research had many positive strenghts, it was also criticised for its normative focus, and for its vulnerability to changing development fashions and donor preoccupations. Today, attitudes to NGOs have grown more complex and ambiguous......, and the institutional landscape in which NGOs are embedded is undergoing rapid change. A new wave of NGO-related reserach is underway which gives particular emphasis to theory, agency, method and context. Such approaches have the potential to consolidate the field of NGO research within development studies as a more...

  11. Moving interfaces and quasilinear parabolic evolution equations

    Prüss, Jan

    2016-01-01

    In this monograph, the authors develop a comprehensive approach for the mathematical analysis of a wide array of problems involving moving interfaces. It includes an in-depth study of abstract quasilinear parabolic evolution equations, elliptic and parabolic boundary value problems, transmission problems, one- and two-phase Stokes problems, and the equations of incompressible viscous one- and two-phase fluid flows. The theory of maximal regularity, an essential element, is also fully developed. The authors present a modern approach based on powerful tools in classical analysis, functional analysis, and vector-valued harmonic analysis. The theory is applied to problems in two-phase fluid dynamics and phase transitions, one-phase generalized Newtonian fluids, nematic liquid crystal flows, Maxwell-Stefan diffusion, and a variety of geometric evolution equations. The book also includes a discussion of the underlying physical and thermodynamic principles governing the equations of fluid flows and phase transitions...

  12. Measuring of noise emitted by moving vehicles

    Skrúcaný Tomáš

    2017-01-01

    Full Text Available The article aims to measure the intensity of the exterior noise of a vehicle in motion. It provides the results of the measurements of the external noise of selected vehicles in motion and the impact of selected factors on the sound level of driving. There are done two measurements in the paper. Results from the first one are comparing noise level of 9 passenger cars according to the Directive 71/157/EEC. The second one shows the road surface influence on the exterior noise of moving vehicle where the sound level was measured by a road whose surface was made of slightly degraded concrete, and at a different place of the same road, where the surface was renovated by applying asphalt mix onto it.

  13. Prostate cancer screening: and yet it moves!

    Maciej Kwiatkowski

    2015-06-01

    Full Text Available The debate of prostate cancer (PCa screening has been shaped over decades. There is a plethora of articles in the literature supporting as well as declining prostate-specific antigen (PSA screening. Does screening decrease PCa mortality? With the long-term results of the European Randomized Study of Screening for Prostate (ERSPC the answer is clearly YES. It moves! However, in medicine there are no benefits without any harm and thus, screening has to be performed in targeted and smart way-or in other words-in a risk-adapted fashion when compared with the way it was done in the past. Here, we discuss the main findings of the ERSPC trials and provide insights on how the future screening strategies should be implemented.

  14. Hydrodynamic forces on two moving discs

    Burton D.A.

    2004-01-01

    Full Text Available We give a detailed presentation of a flexible method for constructing explicit expressions of irrotational and incompressible fluid flows around two rigid circular moving discs. We also discuss how such expressions can be used to compute the fluid-induced forces and torques on the discs in terms of Killing drives. Conformal mapping techniques are used to identify a meromorphic function on an annular region in C with a flow around two circular discs by a Mobius transformation. First order poles in the annular region correspond to vortices outside of the two discs. Inflows are incorporated by putting a second order pole at the point in the annulus that corresponds to infinity.

  15. Moving research beyond the spanking debate.

    MacMillan, Harriet L; Mikton, Christopher R

    2017-09-01

    Despite numerous studies identifying a broad range of harms associated with the use of spanking and other types of physical punishment, debate continues about its use as a form of discipline. In this commentary, we recommend four strategies to move the field forward and beyond the spanking debate including: 1) use of methodological approaches that allow for stronger causal inference; 2) consideration of human rights issues; 3) a focus on understanding the causes of spanking and reasons for its decline in certain countries; and 4) more emphasis on evidence-based approaches to changing social norms to reject spanking as a form of discipline. Physical punishment needs to be recognized as an important public health problem. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Parallel-In-Time For Moving Meshes

    Falgout, R. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Manteuffel, T. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Southworth, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schroder, J. B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-04

    With steadily growing computational resources available, scientists must develop e ective ways to utilize the increased resources. High performance, highly parallel software has be- come a standard. However until recent years parallelism has focused primarily on the spatial domain. When solving a space-time partial di erential equation (PDE), this leads to a sequential bottleneck in the temporal dimension, particularly when taking a large number of time steps. The XBraid parallel-in-time library was developed as a practical way to add temporal parallelism to existing se- quential codes with only minor modi cations. In this work, a rezoning-type moving mesh is applied to a di usion problem and formulated in a parallel-in-time framework. Tests and scaling studies are run using XBraid and demonstrate excellent results for the simple model problem considered herein.

  17. Virtual reality for freely moving animals.

    Stowers, John R; Hofbauer, Maximilian; Bastien, Renaud; Griessner, Johannes; Higgins, Peter; Farooqui, Sarfarazhussain; Fischer, Ruth M; Nowikovsky, Karin; Haubensak, Wulf; Couzin, Iain D; Tessmar-Raible, Kristin; Straw, Andrew D

    2017-10-01

    Standard animal behavior paradigms incompletely mimic nature and thus limit our understanding of behavior and brain function. Virtual reality (VR) can help, but it poses challenges. Typical VR systems require movement restrictions but disrupt sensorimotor experience, causing neuronal and behavioral alterations. We report the development of FreemoVR, a VR system for freely moving animals. We validate immersive VR for mice, flies, and zebrafish. FreemoVR allows instant, disruption-free environmental reconfigurations and interactions between real organisms and computer-controlled agents. Using the FreemoVR platform, we established a height-aversion assay in mice and studied visuomotor effects in Drosophila and zebrafish. Furthermore, by photorealistically mimicking zebrafish we discovered that effective social influence depends on a prospective leader balancing its internally preferred directional choice with social interaction. FreemoVR technology facilitates detailed investigations into neural function and behavior through the precise manipulation of sensorimotor feedback loops in unrestrained animals.

  18. The Wolf 630 moving group of stars

    McDonald, A.R.E.; Hearnshaw, J.B.; Canterbury Univ., Christchurch

    1983-01-01

    An analysis is made of the probability of collective membership of the stars assigned by Eggen to the Wolf 630 moving group. This probability is estimated from the scatter of points in the colour-absolute magnitude diagram when compared to the intrinsic scatter observed for M67. Particular attention is paid to the random errors for all the observed and deduced stellar parameters. Results show that either the observational errors must be about 2.4 times larger than given in the proper motion and radial velocity source catalogues, or the intrinsic scatter in the colour-magnitude diagram for the Wolf 630 group must be much larger than for M67, or many of the stars considered cannot be members. (author)

  19. Moving strip technique of electron beam therapy

    Matsushima, Kishio; Wakasa, Hiroyuki; Oguri, Nobuhiro; Kitayama, Takuichi; Nakagiri, Yoshitada; Mikami, Yasutaka; Hashimoto, Keiji; Hiraki, Yoshio; Aono, Kaname

    1984-12-01

    The fieldsize in electron beam therapy is determined by the cone size. In case of skin metastasis of a malignant tumor and so on, which need a large field size and whose area is much larger than the size of the cone, a large field size is usually produced by dividing the portals. However, the dose distribution at the border of the field becomes unequal, and hot and cold dose areas are produced according to the distance between portals. We tried the strip field technique in a large field along the long axis of the body in order to flatten the dose of the border employing the moving strip used for whole abdominal irradiation in ovarian cancer. We set the film in Mix-DP and used the strip field technique with 2.5cm steps. We discussed the relationship between the interval (distance between portals) and the flattening of the dose within the field. Skin movement due to breathing and influences on the flattening of the dose were considered. The proper flatness was obtained at depths of 0,1,2, and 3cm by setting the interval at 0.5cm. When skin movement was produced by breathing in +-1.5mm, the proper flaness was obtained also at a 0.5-cm interval. It seems that smoothing is increased by breathing. An ''electron beam moving strip'' with a 2.5-cm step and 0.5-cm interval was clinically effective in the treatment of patients with skin metastasis of colon cancer. (author).

  20. Moving target feature phenomenology data collection at China Lake

    Gross, David C.; Hill, Jeff; Schmitz, James L.

    2002-08-01

    This paper describes the DARPA Moving Target Feature Phenomenology (MTFP) data collection conducted at the China Lake Naval Weapons Center's Junction Ranch in July 2001. The collection featured both X-band and Ku-band radars positioned on top of Junction Ranch's Parrot Peak. The test included seven targets used in eleven configurations with vehicle motion consisting of circular, straight-line, and 90-degree turning motion. Data was collected at 10-degree and 17-degree depression angles. Key parameters in the collection were polarization, vehicle speed, and road roughness. The collection also included a canonical target positioned at Junction Ranch's tilt-deck turntable. The canonical target included rotating wheels (military truck tire and civilian pick-up truck tire) and a flat plate with variable positioned corner reflectors. The canonical target was also used to simulate a rotating antenna and a vibrating plate. The target vehicles were instrumented with ARDS pods for differential GPS and roll, pitch and yaw measurements. Target motion was also documented using a video camera slaved to the X-band radar antenna and by a video camera operated near the target site.

  1. Minnesota County Boundaries - lines

    Minnesota Department of Natural Resources — Minnesota county boundaries derived from a combination of 1:24,000 scale PLS lines, 1:100,000 scale TIGER, 1:100,000 scale DLG, and 1:24,000 scale hydrography lines....

  2. Database of emission lines

    Binette, L.; Ortiz, P.; Joguet, B.; Rola, C.

    1998-11-01

    A widely accessible data bank (available through Netscape) and consiting of all (or most) of the emission lines reported in the litterature is being built. It will comprise objects as diverse as HII regions, PN, AGN, HHO. One of its use will be to define/refine existing diagnostic emission line diagrams.

  3. Moves to withdraw nuclear weapons from NATO?

    Dumoulin, A.

    2008-01-01

    The American nuclear landscape in Europe could change in the coming months. The signs are already there, and a new strategic posture will have major implications for the Europeans as well as for the visibility of France deterrent force. Nonetheless, the Georgian crisis, tensions with Iran, Russian muscle flexing and NATO's line cast doubt on the idea that a partial or even complete withdrawal of American B-61 bombs could be on the agenda at the Alliance's 60. anniversary in April 2009. (author)

  4. 30 CFR 56.12071 - Movement or operation of equipment near high-voltage power lines.

    2010-07-01

    ...-voltage power lines. 56.12071 Section 56.12071 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... NONMETAL MINES Electricity § 56.12071 Movement or operation of equipment near high-voltage power lines. When equipment must be moved or operated near energized high-voltage powerlines (other than trolley...

  5. An Efficient and Robust Moving Shadow Removal Algorithm and Its Applications in ITS

    Shou Yu-Wen

    2010-01-01

    Full Text Available We propose an efficient algorithm for removing shadows of moving vehicles caused by non-uniform distributions of light reflections in the daytime. This paper presents a brand-new and complete structure in feature combination as well as analysis for orientating and labeling moving shadows so as to extract the defined objects in foregrounds more easily in each snapshot of the original files of videos which are acquired in the real traffic situations. Moreover, we make use of Gaussian Mixture Model (GMM for background removal and detection of moving shadows in our tested images, and define two indices for characterizing non-shadowed regions where one indicates the characteristics of lines and the other index can be characterized by the information in gray scales of images which helps us to build a newly defined set of darkening ratios (modified darkening factors based on Gaussian models. To prove the effectiveness of our moving shadow algorithm, we carry it out with a practical application of traffic flow detection in ITS (Intelligent Transportation System—vehicle counting. Our algorithm shows the faster processing speed, 13.84 ms/frame, and can improve the accuracy rate in 4%~10% for our three tested videos in the experimental results of vehicle counting.

  6. Move-tecture: A Conceptual Framework for Designing Movement in Architecture

    Yilmaz, Irem

    2017-10-01

    Along with the technological improvements in our age, it is now possible for the movement to become one of the basic components of the architectural space. Accordingly, architectural construction of movement changes both our architectural production practices and our understanding of architectural space. However, existing design concepts and approaches are insufficient to discuss and understand this change. In this respect, this study aims to form a conceptual framework on the relationship of architecture and movement. In this sense, the conceptualization of move-tecture is developed to research on the architectural construction of movement and the potentials of spatial creation through architecturally constructed movement. Move-tecture, is a conceptualization that treats movement as a basic component of spatial creation. It presents the framework of a qualitative categorization on the design of moving architectural structures. However, this categorization is a flexible one that can evolve in the direction of the expanding possibilities of the architectural design and the changing living conditions. With this understanding, six categories have been defined within the context of the article: Topological Organization, Choreographic Formation, Kinetic Structuring, Corporeal Constitution, Technological Configuration and Interactional Patterning. In line with these categories, a multifaceted perspective on the moving architectural structures is promoted. It is aimed that such an understanding constitutes a new initiative in the design practices carried out in this area and provides a conceptual basis for the discussions to be developed.

  7. Legal Decisions, Affective Justice and 'Moving On'?

    Agata Fijalkowski

    2017-06-01

    Full Text Available Our paper argues that a move away from the linear approach adopted in transitional justice scholarship is required to the question of ‘moving on’, understood as the way in which a post-dictatorial or a post-conflict regime addresses the past injustices of the predecessor regime. We consider this question in relation to two case studies: post-dictatorial Albania and post-conflict Sierra Leone. Both examples point to important factors that underpin the meanings of ‘moving on’ and of justice, when analysed through a law and aesthetics lens. It has long been established that legal scholarship that makes use of works of art aids and clarifies the points that it wants to make. We examine the power of certain art forms, namely the way in which space ‘speaks’ and the narratives found in an image in the Albanian context, and the use of film to provide a deeper appreciation of the conflict in the Sierra Leonean context. Different aesthetic practices have been used as a way to respond to historical injustice and mass atrocity, also when partial justice (through the law has been achieved. Our article argues that law’s limitations can be understood through the process of unravelling the pieces of the puzzle that make up affective justice. Artistic representation allows for a more complex narration than law’s linear demands. Este artículo defiende que para poder “avanzar”, es necesario un alejamiento del enfoque lineal adoptado por los académicos expertos en justicia transicional, entendida ésta como la forma en la que un régimen aborda, después de una dictadura o un conflicto, injusticias perpetradas durante el régimen anterior. Se considera esta cuestión en relación con dos estudios de caso: Albania después de una dictadura, y Sierra Leona después de un conflicto. Ambos ejemplos apuntan factores importantes que sustentan los significados de “avanzar” y de justicia, cuando se analizan a través de la lente del derecho y la

  8. Wood pole overhead lines

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  9. CIRCULATING MOVING BED COMBUSTION PROOF OF CONCEPT

    Jukkola, Glen

    2010-06-30

    Circulating Moving Bed (CMB) combustion technology has its roots in traditional circulating fluidized bed technology and involves a novel method of solid fuel combustion and heat transfer. CMB technology represents a step change in improved performance and cost relative to conventional PC and FBC boilers. The CMB heat exchanger preheats the energy cycle working fluid, steam or air, to the high temperature levels required in systems for advanced power generation. Unique features of the CMB are the reduction of the heat transfer surfaces by about 60% as a result of the enhanced heat transfer rates, flexibility of operation, and about 30% lower cost over existing technology. The CMB Phase I project ran from July 2001 through March 2003. Its objective was to continue development of the CMB technology with a series of proof of concept tests. The tests were conducted at a scale that provided design data for scale up to a demonstration plant. These objectives were met by conducting a series of experiments in ALSTOM Power’s Multi-use Test Facility (MTF). The MTF was modified to operate under CMB conditions of commercial interest. The objective of the tests were to evaluate gas-to-solids heat transfer in the upper furnace, assess agglomeration in the high temperature CMB bubbling bed, and evaluate solids-to-tube heat transfer in the moving bed heat exchanger. The Phase I program results showed that there are still some significant technical uncertainties that needed to be resolved before the technology can be confidently scaled up for a successful demonstration plant design. Work remained in three primary areas: • scale up of gas to solid heat transfer • high temperature finned surface design • the overall requirements of mechanical and process design. The CMB Phase II workscope built upon the results of Phase I and specifically addressed the remaining technical uncertainties. It included a scaled MTF heat transfer test to provide the necessary data to scale up gas

  10. Internal migration: why do Filipinos move?

    Jolipa, N

    1980-01-01

    The rapid movement of Filipinos from 1 part of the Philippines to another is not a new phenomenon, but mobility has been increasing. A study conducted by Peter C. Smith revealed that interprovincial lifetime mobility of the national population increased from 15.8% in 1960 to 17.6% in 1970, while interregional mobility increased from 12.7% to 13.4%. People still disagree as to whether the size and rate of growth of the population are excessive, but there seems to be total consensus as regards its spatial imbalance. Because internal migration appears to be an important factor in national development, a need exists to examine different aspects of internal migration, such as the directions taken by migration flows, the migrants' reasons for moving, the migrants' characteristics, the migrants' success or lack of success at their places of destination, the social problems accompanying internal migration, effforts to deal with the problems caused by internal migration, and the implications of migration trends for policy and for the country's development programs. The most dominant migration trend in the Philippines in recent years has been toward the urban, or more accurately the suburban, areas adjacent to Metropolitan Manila. The city of Manila itself suffered a net outflow, further pointing to the trend toward suburbanization. Migration flows are primarily caused by economic reasons. About one half the sample of a Filipinas Foundation Study moved to provinces other than the province of birth in the pursuit of employment and other economic opportunities. A study of the country's migrant population age 15 and older showed that 53% of migrants were female. For male migrants, age ranges from 20-40; it ranges from 15-35 for females. Where cash income is concerned, migrants in Pernia's study of rural urban migration were better off than nonmigrants. Migrants were, on the average, as well off as native urbanites or metropolitanites. Among the more significant points raised by

  11. Myxobacteria: moving, killing, feeding, and surviving together

    José eMuñoz-Dorado

    2016-05-01

    Full Text Available Myxococcus xanthus, like other myxobacteria, is a social bacterium that moves and feeds cooperatively in predatory groups. On surfaces, rod-shaped vegetative cells move in search of the prey in a coordinated manner, forming dynamic multicellular groups referred to as swarms. Within the swarms, cells interact with one another and use two separate locomotion systems. Adventurous motility, which drives the movement of individual cells, is associated with the secretion of slime that forms trails at the leading edge of the swarms. It has been proposed that cellular traffic along these trails contributes to M. xanthus social behavior via stigmergic regulation. However, most of the cells travel in groups by using social motility, which is cell contact-dependent and requires a large number of individuals. Exopolysaccharides and the retraction of type IV pili at alternate poles of the cells are the engines associated with social motility. When the swarms encounter prey, the population of M. xanthus lyses and takes up nutrients from nearby cells. This cooperative and highly density-dependent feeding behavior has the advantage that the pool of hydrolytic enzymes and other secondary metabolites secreted by the entire group is shared by the community to optimize the use of the degradation products. This multicellular behavior is especially observed in the absence of nutrients. In this condition, M. xanthus swarms have the ability to organize the gliding movements of thousands of rods, synchronizing rippling waves of oscillating cells, to form macroscopic fruiting bodies, with three subpopulations of cells showing division of labor. A small fraction of cells either develop into resistant myxospores or remain as peripheral rods, while the majority of cells die, probably to provide nutrients to allow aggregation and spore differentiation. Sporulation within multicellular fruiting bodies has the benefit of enabling survival in hostile environments, and increases

  12. Sunnybrook's matrix organizational model--moving ahead.

    Ellis, P H; Gaskin, P M

    1988-01-01

    Traditionally, hospitals have denied the true intricacy of their organization by forcing all reporting relationships into a single structure. To address this complexity, Sunnybrook has developed three independent, yet interrelated, organization dimensions. Three structures--the traditional, the clinical unit and the programmatic dimension--provide a better link of accountability by holding departments responsible for the efficiency of their operations, holding physicians accountable for the resource implication of volume and case mix, and ensuring that the activities of the hospital's departments and clinical units are in line with hospital's overall mission and programs.

  13. Plans, Patterns, and Move Categories Guiding a Highly Selective Search

    Trippen, Gerhard

    In this paper we present our ideas for an Arimaa-playing program (also called a bot) that uses plans and pattern matching to guide a highly selective search. We restrict move generation to moves in certain move categories to reduce the number of moves considered by the bot significantly. Arimaa is a modern board game that can be played with a standard Chess set. However, the rules of the game are not at all like those of Chess. Furthermore, Arimaa was designed to be as simple and intuitive as possible for humans, yet challenging for computers. While all established Arimaa bots use alpha-beta search with a variety of pruning techniques and other heuristics ending in an extensive positional leaf node evaluation, our new bot, Rat, starts with a positional evaluation of the current position. Based on features found in the current position - supported by pattern matching using a directed position graph - our bot Rat decides which of a given set of plans to follow. The plan then dictates what types of moves can be chosen. This is another major difference from bots that generate "all" possible moves for a particular position. Rat is only allowed to generate moves that belong to certain categories. Leaf nodes are evaluated only by a straightforward material evaluation to help avoid moves that lose material. This highly selective search looks, on average, at only 5 moves out of 5,000 to over 40,000 possible moves in a middle game position.

  14. Moving through a multiplex holographic scene

    Mrongovius, Martina

    2013-02-01

    This paper explores how movement can be used as a compositional element in installations of multiplex holograms. My holographic images are created from montages of hand-held video and photo-sequences. These spatially dynamic compositions are visually complex but anchored to landmarks and hints of the capturing process - such as the appearance of the photographer's shadow - to establish a sense of connection to the holographic scene. Moving around in front of the hologram, the viewer animates the holographic scene. A perception of motion then results from the viewer's bodily awareness of physical motion and the visual reading of dynamics within the scene or movement of perspective through a virtual suggestion of space. By linking and transforming the physical motion of the viewer with the visual animation, the viewer's bodily awareness - including proprioception, balance and orientation - play into the holographic composition. How multiplex holography can be a tool for exploring coupled, cross-referenced and transformed perceptions of movement is demonstrated with a number of holographic image installations. Through this process I expanded my creative composition practice to consider how dynamic and spatial scenes can be conveyed through the fragmented view of a multiplex hologram. This body of work was developed through an installation art practice and was the basis of my recently completed doctoral thesis: 'The Emergent Holographic Scene — compositions of movement and affect using multiplex holographic images'.

  15. Granular packings with moving side walls

    Landry, James W.; Grest, Gary Stephen

    2004-01-01

    The effects of movement of the side walls of a confined granular packing are studied by discrete element, molecular dynamics simulations. The dynamical evolution of the stress is studied as a function of wall movement both in the direction of gravity as well as opposite to it. For all wall velocities explored, the stress in the final state of the system after wall movement is fundamentally different from the original state obtained by pouring particles into the container and letting them settle under the influence of gravity. The original packing possesses a hydrostaticlike region at the top of the container which crosses over to a depth-independent stress. As the walls are moved in the direction opposite to gravity, the saturation stress first reaches a minimum value independent of the wall velocity, then increases to a steady-state value dependent on the wall velocity. After wall movement ceases and the packing reaches equilibrium, the stress profile fits the classic Janssen form for high wall velocities, while some deviations remain for low wall velocities. The wall movement greatly increases the number of particle-wall and particle-particle forces at the Coulomb criterion. Varying the wall velocity has only small effects on the particle structure of the final packing so long as the walls travel a similar distance.

  16. Physical Fitness: Get Your Body Moving

    Physical Fitness: Get Your Body Moving; Exercise; does exercise help quit smoking; exercises after quitting smoking; exercise after smoking; exercise and quitting smoking; exercise and smoking; smoking articles; articles about smoking; articles on smoking; articles about smoking; article on smoking; health articles on smoking; smoking article; benefits of physical activity; benefits for physical activity; benefit of physical activity; benefits to physical activity; daily physical activities; daily physical activity; healthy physical activities; healthy physical activity; health activities; activity for health; exercise physical activity and health; health activities; health activities for kids; health and fitness activities; health benefits for physical activity; health benefits from physical activity; health benefits of physical activity; health benefits physical activity; health promotion activities; physical exercise; exercise and physical activity; exercise and physical health; exercise for physical fitness; health benefits of physical fitness; how to do physical exercise; physical activity and exercise; physical activity exercise; physical health; physical health and fitness; physical health and wellness; physical health benefits; physical Health fitness; what are the benefits of physical fitness; physical fitness; about physical fitness; benefits of physical fitness; how to improve physical fitness; physical fitness; physical fitness article; fitness; fitness article; fitness articles; fitness plans; health and fitness; exercise; benefits of regular exercise on health; exercise plan; exercise tips; routine; best work out routine for overweight women

  17. Time delay interferometry with moving spacecraft arrays

    Tinto, Massimo; Estabrook, F.B.; Armstrong, J.W.

    2004-01-01

    Space-borne interferometric gravitational wave detectors, sensitive in the low-frequency (millihertz) band, will fly in the next decade. In these detectors the spacecraft-to-spacecraft light-travel-times will necessarily be unequal, time varying, and (due to aberration) have different time delays on up and down links. The reduction of data from moving interferometric laser arrays in solar orbit will in fact encounter nonsymmetric up- and down-link light time differences that are about 100 times larger than has previously been recognized. The time-delay interferometry (TDI) technique uses knowledge of these delays to cancel the otherwise dominant laser phase noise and yields a variety of data combinations sensitive to gravitational waves. Under the assumption that the (different) up- and down-link time delays are constant, we derive the TDI expressions for those combinations that rely only on four interspacecraft phase measurements. We then turn to the general problem that encompasses time dependence of the light-travel times along the laser links. By introducing a set of noncommuting time-delay operators, we show that there exists a quite general procedure for deriving generalized TDI combinations that account for the effects of time dependence of the arms. By applying our approach we are able to re-derive the 'flex-free' expression for the unequal-arm Michelson combinations X 1 , and obtain the generalized expressions for the TDI combinations called relay, beacon, monitor, and symmetric Sagnac

  18. Radiofrequency generation by coherently moving fluxons

    Dobrovolskiy, O. V.; Sachser, R.; Huth, M.; Shklovskij, V. A.; Vovk, R. V.; Bevz, V. M.; Tsindlekht, M. I.

    2018-04-01

    A lattice of Abrikosov vortices in type II superconductors is characterized by a periodic modulation of the magnetic induction perpendicular to the applied magnetic field. For a coherent vortex motion under the action of a transport current, the magnetic induction at a given point of the sample varies in time with a washboard frequency fWB = v/d, where v is the vortex velocity and d is the distance between the vortices in the direction of motion. Here, by using a spectrum analyzer connected to a 50 nm-wide Au nanowire meander near the surface of a superconducting Nb film, we detect an ac voltage induced by coherently moving fluxons. The voltage is peaked at the washboard frequency, fWB, and its subharmonics, fTOF = fWB/5, determined by the antenna width. By sweeping the dc current value, we reveal that fWB can be tuned from 100 MHz to 1.5 GHz, thereby demonstrating that patterned normal metal/superconductor nanostructures can be used as dc-tunable generators operating in the radiofrequency range.

  19. Generalized dynamics of moving dislocations in quasicrystals

    Agiasofitou, Eleni; Lazar, Markus; Kirchner, Helmut

    2010-01-01

    A theoretical framework for dislocation dynamics in quasicrystals is provided according to the continuum theory of dislocations. Firstly, we present the fundamental theory for moving dislocations in quasicrystals giving the dislocation density tensors and introducing the dislocation current tensors for the phonon and phason fields, including the Bianchi identities. Next, we give the equations of motion for the incompatible elastodynamics as well as for the incompatible elasto-hydrodynamics of quasicrystals. We continue with the derivation of the balance law of pseudomomentum thereby obtaining the generalized forms of the Eshelby stress tensor, the pseudomomentum vector, the dynamical Peach-Koehler force density and the Cherepanov force density for quasicrystals. The form of the dynamical Peach-Koehler force for a straight dislocation is obtained as well. Moreover, we deduce the balance law of energy that gives rise to the generalized forms of the field intensity vector and the elastic power density of quasicrystals. The above balance laws are produced for both models. The differences between the two models and their consequences are revealed. The influences of the phason fields as well as of the dynamical terms are also discussed.

  20. Washington in '97: Positive energy moves expected

    Matthews, C.D.

    1997-01-01

    After the stormy closing weeks of the 1996 electrons, when the fog finally lifted, a strong indication of the direction American politics is taking emerged. It is still moving clearly to the right. Donald Lambro, chief political correspondent of The Washington Times, put it this way, ''Contemporary liberalism may not be dead and buried yet, but it remains comatose and continues to wither away--without a clear and relevant agenda, without a credible champion, and without a majority party. Meanwhile, the Congress that will be sworn in next January will be one of the most conservative in decades.'' Why that will likely bode well for the US oil and gas industry is the theme of the following discussion. Outlined therein are: some thoughts on why Clinton won; a wrapup of key seats and committee members of the 105th Congress; news of a bipartisan forum for the oil/gas industry; improved outlook for movement on the Arctic National Wildlife Refuge (ANWR); progress on the national public education program; and a list of industry's challenges for the next few years

  1. Hydrogen atom moving across a magnetic field

    Lozovik, Yu.E.; Volkov, S.Yu.

    2004-01-01

    A hydrogen atom moving across a magnetic field is considered in a wide region of magnitudes of magnetic field and atom momentum. We solve the Schroedinger equation of the system numerically using an imaginary time method and find wave functions of the lowest states of atom. We calculate the energy and the mean electron-nucleus separation as a function of atom momentum and magnetic field. All the results obtained could be summarized as a phase diagram on the 'atom-momentum - magnetic-field' plane. There are transformations of wave-function structure at critical values of atom momentum and magnetic field that result in a specific behavior of dependencies of energy and mean interparticle separation on the atom momentum P. We discuss a transition from the Zeeman regime to the high magnetic field regime. A qualitative analysis of the complicated behavior of wave functions vs P based on the effective potential examination is given. We analyze a sharp transition at the critical momentum from a Coulomb-type state polarized due to atom motion to a strongly decentered (Landau-type) state at low magnetic fields. A crossover occurring at intermediate magnetic fields is also studied

  2. Convexities move because they contain matter.

    Barenholtz, Elan

    2010-09-22

    Figure-ground assignment to a contour is a fundamental stage in visual processing. The current paper introduces a novel, highly general dynamic cue to figure-ground assignment: "Convex Motion." Across six experiments, subjects showed a strong preference to assign figure and ground to a dynamically deforming contour such that the moving contour segment was convex rather than concave. Experiments 1 and 2 established the preference across two different kinds of deformational motion. Additional experiments determined that this preference was not due to fixation (Experiment 3) or attentional mechanisms (Experiment 4). Experiment 5 found a similar, but reduced bias for rigid-as opposed to deformational-motion, and Experiment 6 demonstrated that the phenomenon depends on the global motion of the effected contour. An explanation of this phenomenon is presented on the basis of typical natural deformational motion, which tends to involve convex contour projections that contain regions consisting of physical "matter," as opposed to concave contour indentations that contain empty space. These results highlight the fundamental relationship between figure and ground, perceived shape, and the inferred physical properties of an object.

  3. The body talks, moves and acquires identity

    Nina Calero

    2014-02-01

    Full Text Available The body is the main communication tool in the child, gesture and posture of those around you let you understand their environment; from birth the child begins a process of self-recognition to be strengthened in different social spheres from personal experiences, as the emission of sounds with your body, body language and play a fundamental part of your child’s condition.For the child to move in the surrounding medium is what is the most important, as this experience allows the child not only to know his or her body, but also to communicate and form his or her own identity from the personal and social relationships. It is for this reason that the recognition of his body and his skills make fundamental part of this experience is called movement. From the movement of his body the child expresses, lives and acquires skills that enable him or her to understand their environment and so develop themselves physically, cognitively and socially using basic tools of their physical structure, the gesture and posture in different emotional manifestations.

  4. Moving Canadian gas - options or confusion?

    Riha, R.

    1997-01-01

    The question of whether and how much gas carrying capacity is required beyond Chicago was examined. Assuming that the answer is 'yes', how much of the gas should be moved beyond Chicago, and which of the many pipeline options currently available should be chosen, was discussed. PanEnergy, one of the United States' five-largest transporters of natural gas and producers of natural gas liquids, with a base of 37,000 miles of natural gas pipelines, decided to get involved with Spectrum which takes gas away from Chicago, and Excelsior which gets gas into New York City. The Spectrum pipeline is designed to phase-in transport of up to 500,000 Dth/d from the Chicago area to the east coast and other markets served by the PanEnergy pipelines, such as southern Ontario, Kansas City and Memphis. The Excelsior pipeline project has been proposed to get gas into New York City. It is a long term solution designed to meet several years of strong historical and forecasted market growth. At the same time, it is not a new pipeline; it is backed by existing assets and will provide service as early as 1998. 15 figs

  5. Veterans Crisis Line

    Department of Veterans Affairs — The caring responders at the Veterans Crisis Line are specially trained and experienced in helping Veterans of all ages and circumstances. Some of the responders are...

  6. Product line design

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  7. Kansas Electric Transmission Lines

    Kansas Data Access and Support Center — This data set is a digital representation of the EletcircTransmission lines for the State of Kansas as maintained by the Kansas Corporation Commission. Data is...

  8. Electric Power Transmission Lines

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  9. SAF line powder operations

    Frederickson, J.R.; Horgos, R.M.

    1983-10-01

    An automated nuclear fuel fabrication line is being designed for installation in the Fuels and Materials Examination Facility (FMEF) near Richland, Washington. The fabrication line will consist of seven major process systems: Receiving and Powder Preparation; Powder Conditioning; Pressing and Boat Loading; Debinding, Sintering, and Property Adjustment; Boat Transport; Pellet Inspection and Finishing; and Pin Operations. Fuel powder processing through pellet pressing will be discussed in this paper

  10. Capital Improvements Business Line

    2012-08-08

    NAVFAC Southwest Dan Waid Program & Business Mgmt NAVFAC SW Capital Improvements Business Line NAVFAC SW 8 August 2012 1 Report...REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Capital Improvements Business Line 5a. CONTRACT NUMBER 5b. GRANT...AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 2012 Navy Gold Coast Small Business

  11. Segmentation of Moving Object Using Background Subtraction Method in Complex Environments

    S. Kumar

    2016-06-01

    Full Text Available Background subtraction is an extensively used approach to localize the moving object in a video sequence. However, detecting an object under the spatiotemporal behavior of background such as rippling of water, moving curtain and illumination change or low resolution is not a straightforward task. To deal with the above-mentioned problem, we address a background maintenance scheme based on the updating of background pixels by estimating the current spatial variance along the temporal line. The work is focused to immune the variation of local motion in the background. Finally, the most suitable label assignment to the motion field is estimated and optimized by using iterated conditional mode (ICM under a Markovian framework. Performance evaluation and comparisons with the other well-known background subtraction methods show that the proposed method is unaffected by the problem of aperture distortion, ghost image, and high frequency noise.

  12. The Monte Carlo photoionization and moving-mesh radiation hydrodynamics code CMACIONIZE

    Vandenbroucke, B.; Wood, K.

    2018-04-01

    We present the public Monte Carlo photoionization and moving-mesh radiation hydrodynamics code CMACIONIZE, which can be used to simulate the self-consistent evolution of HII regions surrounding young O and B stars, or other sources of ionizing radiation. The code combines a Monte Carlo photoionization algorithm that uses a complex mix of hydrogen, helium and several coolants in order to self-consistently solve for the ionization and temperature balance at any given type, with a standard first order hydrodynamics scheme. The code can be run as a post-processing tool to get the line emission from an existing simulation snapshot, but can also be used to run full radiation hydrodynamical simulations. Both the radiation transfer and the hydrodynamics are implemented in a general way that is independent of the grid structure that is used to discretize the system, allowing it to be run both as a standard fixed grid code, but also as a moving-mesh code.

  13. Moving Horizon Control and Estimation of Livestock Ventilation Systems and Indoor Climate

    Wu, Z.; Stoustrup, Jakob; Jørgensen, John Bagterp

    2008-01-01

    In this paper, a new control strategy involves exploiting actuator redundancy in a multivariable system is developed for rejecting the covariance of the fast frequency disturbances and pursuing optimum energy solution. This strategy enhances the resilience of the control system to disturbances...... beyond its bandwidth and reduce energy consumption through on-line optimization computation. The moving horizon estimation and control (also called predictive control) technology is applied and simulated. The design is based on a coupled mathematical model which combines the hybrid ventilation system...... and the associated indoor climate for poultry in barns. The comparative simulation results illustrate the significant potential and advancement of the moving horizon methodologies in estimation and control for nonlinear Multiple Input and Multiple Output system with unknown noise covariance and actuator saturation....

  14. Visualizing special relativity: the field of an electric dipole moving at relativistic speed

    Smith, Glenn S

    2011-01-01

    The electromagnetic field is determined for a time-varying electric dipole moving with a constant velocity that is parallel to its moment. Graphics are used to visualize this field in the rest frame of the dipole and in the laboratory frame when the dipole is moving at relativistic speed. Various phenomena from special relativity are clearly illustrated by these graphics and explained with simple calculations; these include the constancy of the speed of light in inertial frames, the Doppler effect, the headlight effect, and the concentration of field lines. In addition, the energy and linear momentum of the radiated field are determined and shown to satisfy the transformation and invariance required by special relativity.

  15. Nasca Lines, Peru

    2001-01-01

    The Nasca Lines are located in the Pampa region of Peru, the desolate plain of the Peruvian coast 400 km south of Lima. The Lines were first spotted when commercial airlines began flying across the Peruvian desert in the 1920's. Passengers reported seeing 'primitive landing strips' on the ground below. The Lines were made by removing the iron-oxide coated pebbles which cover the surface of the desert. When the gravel is removed, they contrast with the light color underneath. In this way the lines were drawn as furrows of a lighter color. On the pampa, south of the Nasca Lines, archaeologists have now uncovered the lost city of the line-builders, Cahuachi. It was built nearly two thousand years ago and was mysteriously abandoned 500 years later. This ASTER sub-image covers an area of 14 x 18 km, was acquired on December 22, 2000, and is located at 14.7 degrees south latitude and 75.1 degrees west longitude. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  16. Advantages and applications of moving bed technology in urban and industrial waste waters; Ventajas y aplicaciones de la tecnologia de lecho movil en aguas residuales urbanas e industriales

    Larrea Urcola, A.; Zalakain Bengoa, G.; Larrea Ucola, L.; Abad Alba, A.

    2004-07-01

    Moving bed technology is a new biological treatment by activated sludge where the biomass grows attached to a inert media (plastic) that moves free along the reactor. The main advantages of this technology are the reduction of the reactor volume, simplicity of operation and the easiest way for the upgrading of plants. Results of different industrial applications are shown together with the latest researches lines that combine organic matter and nitrogen removal. (Author) 12 refs.

  17. Model of directed lines for square ice with second-neighbor and third-neighbor interactions

    Kirov, Mikhail V.

    2018-02-01

    The investigation of the properties of nanoconfined systems is one of the most rapidly developing scientific fields. Recently it has been established that water monolayer between two graphene sheets forms square ice. Because of the energetic disadvantage, in the structure of the square ice there are no longitudinally arranged molecules. The result is that the structure is formed by unidirectional straight-lines of hydrogen bonds only. A simple but accurate discrete model of square ice with second-neighbor and third-neighbor interactions is proposed. According to this model, the ground state includes all configurations which do not contain three neighboring unidirectional chains of hydrogen bonds. Each triplet increases the energy by the same value. This new model differs from an analogous model with long-range interactions where in the ground state all neighboring chains are antiparallel. The new model is suitable for the corresponding system of point electric (and magnetic) dipoles on the square lattice. It allows separately estimating the different contributions to the total binding energy and helps to understand the properties of infinite monolayers and finite nanostructures. Calculations of the binding energy for square ice and for point dipole system are performed using the packages TINKER and LAMMPS.

  18. Diet and asthma: looking back, moving forward

    Ellwood Philippa E

    2009-06-01

    this multidisciplinary approach is required to move forward and understand the complexity of the interaction of dietary factors and asthma.

  19. Rock Moved by Mars Lander Arm

    2008-01-01

    The robotic arm on NASA's Phoenix Mars Lander slid a rock out of the way during the mission's 117th Martian day (Sept. 22, 2008) to gain access to soil that had been underneath the rock.The lander's Surface Stereo Imager took the two images for this stereo view later the same day, showing the rock, called 'Headless,' after the arm pushed it about 40 centimeters (16 inches) from its previous location. 'The rock ended up exactly where we intended it to,' said Matt Robinson of NASA's Jet Propulsion Laboratory, robotic arm flight software lead for the Phoenix team. The arm had enlarged the trench near Headless two days earlier in preparation for sliding the rock into the trench. The trench was dug to about 3 centimeters (1.2 inches) deep. The ground surface between the rock's prior position and the lip of the trench had a slope of about 3 degrees downward toward the trench. Headless is about the size and shape of a VHS videotape. The Phoenix science team sought to move the rock in order to study the soil and the depth to subsurface ice underneath where the rock had been. This image was taken at about 12:30 p.m., local solar time on Mars. The view is to the north northeast of the lander. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by JPL, Pasadena, Calif. Spacecraft development was by Lockheed Martin Space Systems, Denver.

  20. Evaluating Moving Target Defense with PLADD

    Jones, Stephen T. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Outkin, Alexander V. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Gearhart, Jared Lee [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Hobbs, Jacob Aaron [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Siirola, John Daniel [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Phillips, Cynthia A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Verzi, Stephen Joseph [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Tauritz, Daniel [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Mulder, Samuel A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Naugle, Asmeret Bier [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-09-15

    This project evaluates the effectiveness of moving target defense (MTD) techniques using a new game we have designed, called PLADD, inspired by the game FlipIt [28]. PLADD extends FlipIt by incorporating what we believe are key MTD concepts. We have analyzed PLADD and proven the existence of a defender strategy that pushes a rational attacker out of the game, demonstrated how limited the strategies available to an attacker are in PLADD, and derived analytic expressions for the expected utility of the game’s players in multiple game variants. We have created an algorithm for finding a defender’s optimal PLADD strategy. We show that in the special case of achieving deterrence in PLADD, MTD is not always cost effective and that its optimal deployment may shift abruptly from not using MTD at all to using it as aggressively as possible. We believe our effort provides basic, fundamental insights into the use of MTD, but conclude that a truly practical analysis requires model selection and calibration based on real scenarios and empirical data. We propose several avenues for further inquiry, including (1) agents with adaptive capabilities more reflective of real world adversaries, (2) the presence of multiple, heterogeneous adversaries, (3) computational game theory-based approaches such as coevolution to allow scaling to the real world beyond the limitations of analytical analysis and classical game theory, (4) mapping the game to real-world scenarios, (5) taking player risk into account when designing a strategy (in addition to expected payoff), (6) improving our understanding of the dynamic nature of MTD-inspired games by using a martingale representation, defensive forecasting, and techniques from signal processing, and (7) using adversarial games to develop inherently resilient cyber systems.

  1. Balanced Flow Meters without Moving Parts

    Kelley, Anthony R.; VanBuskirk, Paul

    2008-01-01

    Balanced flow meters are recent additions to an established class of simple, rugged flow meters that contain no moving parts in contact with flow and are based on measurement of pressure drops across objects placed in flow paths. These flow meters are highly accurate, minimally intrusive, easily manufacturable, and reliable. A balanced flow meter can be easily mounted in a flow path by bolting it between conventional pipe flanges. A balanced flow meter can be used to measure the flow of any of a variety of liquids or gases, provided that it has been properly calibrated. Relative to the standard orifice-plate flow meter, the balanced flow meter introduces less turbulence and two times less permanent pressure loss and is therefore capable of offering 10 times greater accuracy and repeatability with less dissipation of energy. A secondary benefit of the reduction of turbulence is the reduction of vibration and up to 15 times less acoustic noise generation. Both the balanced flow meter and the standard orifice-plate flow meter are basically disks that contain holes and are instrumented with pressure transducers on their upstream and downstream faces. The most obvious difference between them is that the standard orifice plate contains a single, central hole while the balanced flow meter contains multiple holes. The term 'balanced' signifies that in designing the meter, the sizes and locations of the holes are determined in an optimization procedure that involves balancing of numerous factors, including volumetric flow, mass flow, dynamic pressure, kinetic energy, all in an effort to minimize such undesired effects as turbulence, pressure loss, dissipation of kinetic energy, and non-repeatability and nonlinearity of response over the anticipated range of flow conditions. Due to proper balancing of these factors, recent testing demonstrated that the balanced flow-meter performance was similar to a Venturi tube in both accuracy and pressure recovery, but featured reduced

  2. Transmission line capital costs

    Hughes, K.R.; Brown, D.R.

    1995-05-01

    The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy's Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs

  3. on the performance of Autoregressive Moving Average Polynomial

    Timothy Ademakinwa

    Distributed Lag (PDL) model, Autoregressive Polynomial Distributed Lag ... Moving Average Polynomial Distributed Lag (ARMAPDL) model. ..... Global Journal of Mathematics and Statistics. Vol. 1. ... Business and Economic Research Center.

  4. Heterogeneous CPU-GPU moving targets detection for UAV video

    Li, Maowen; Tang, Linbo; Han, Yuqi; Yu, Chunlei; Zhang, Chao; Fu, Huiquan

    2017-07-01

    Moving targets detection is gaining popularity in civilian and military applications. On some monitoring platform of motion detection, some low-resolution stationary cameras are replaced by moving HD camera based on UAVs. The pixels of moving targets in the HD Video taken by UAV are always in a minority, and the background of the frame is usually moving because of the motion of UAVs. The high computational cost of the algorithm prevents running it at higher resolutions the pixels of frame. Hence, to solve the problem of moving targets detection based UAVs video, we propose a heterogeneous CPU-GPU moving target detection algorithm for UAV video. More specifically, we use background registration to eliminate the impact of the moving background and frame difference to detect small moving targets. In order to achieve the effect of real-time processing, we design the solution of heterogeneous CPU-GPU framework for our method. The experimental results show that our method can detect the main moving targets from the HD video taken by UAV, and the average process time is 52.16ms per frame which is fast enough to solve the problem.

  5. 20007: Quantum particle displacement by a moving localized potential trap

    Granot, E.; Marchewka, A.

    2009-04-01

    We describe the dynamics of a bound state of an attractive δ-well under displacement of the potential. Exact analytical results are presented for the suddenly moved potential. Since this is a quantum system, only a fraction of the initially confined wave function remains confined to the moving potential. However, it is shown that besides the probability to remain confined to the moving barrier and the probability to remain in the initial position, there is also a certain probability for the particle to move at double speed. A quasi-classical interpretation for this effect is suggested. The temporal and spectral dynamics of each one of the scenarios is investigated.

  6. Moving of the traffic belt in the working zone of the Frimmersdorf opencast mine. [3 refs

    Berkenbusch, J; Wuerz, W

    1976-10-01

    The traffic belt, comprising a public road, a railway line of the Federal German railways and a river, the Erft, had to be moved to exploit the Frimmersdorf-Sued opencast mine still further. Some years ago the River Erft had been rerouted in a series of operations. Now the final location of the traffic belt was to follow to the east on the overburden dump behind the opencast mine. After describing the construction engineering plans for the complete project the authors describe the planning sequence, how approval was obtained and construction procedure. Finally, brief mention is made of the landscaping.

  7. Along the line

    Dinesen, Cort Ross

    2011-01-01

    Embarking on a work of art constitutes a reduction of information – because we grasp the diversity and plurality of the manifestations we encounter by abstracting them and transforming them into manageable concepts; as we do when we draw contour lines on the landscape – they are imaginary...... and invisible but an abstraction essential for noting a difference or marking a place on a map. In the same way, a stroke in a sketch or a line in the sand is a manifestation of our ability to draw a boundary that both includes and excludes information. Where the line makes the birth of an idea visible......, it expresses through movement our tendency to mark a difference by drawing attention to and enclosing a whole series of relations that confront our preconceived notions. It is in the process of transformation in which we reduce the complexity of how we work, and rethink our ideas anew by refining the very same...

  8. Spectral Line Shapes. Proceedings

    Zoppi, M.; Ulivi, L.

    1997-01-01

    These proceedings represent papers presented at the 13th International Conference on Spectral Line Shapes which was held in Firenze,Italy from June 16-21, 1996. The topics covered a wide range of subjects emphasizing the physical processes associated with the formation of line profiles: high and low density plasma; atoms and molecules in strong laser fields, Dopple-free and ultra-fine spectroscopy; the line shapes generated by the interaction of neutrals, atoms and molecules, where the relavant quantities are single particle properties, and the interaction-induced spectroscopy. There were 131 papers presented at the conference, out of these, 6 have been abstracted for the Energy Science and Technology database

  9. Stokes line width

    Nikiskov, A.I.; Ritus, V.I.

    1993-01-01

    The concept of Stokes line width is introduced for the asymptotic expansions of functions near an essential singularity. Explicit expressions are found for functions (switching functions) that switch on the exponentially small terms for the Dawson integral, Airy function, and the gamma function. A different, more natural representation of a function, not associated with expansion in an asymptotic series, in the form of dominant and recessive terms is obtained by a special division of the contour integral which represents the function into contributions of higher and lower saddle points. This division leads to a narrower, natural Stokes line width and a switching function of an argument that depends on the topology of the lines of steepest descent from the saddle point

  10. Moving targets. Economic competitiveness of nuclear power

    Rogner, H.H.; Langlois, L.

    2000-01-01

    Most world electricity markets are now moving towards greater competition, driven in part by technology, low fuel prices, and experience that competitive markets are more self-sustaining. Electric power is being sold in a number of markets in member countries of the Organization for Economic Cooperation and Development (OECD) for around US $0.02 per kilowatt-hour (kWh). Can nuclear generation match such prices? If not, can it be made to do so? Electricity companies are now in the business of selling a commodity (kWh) and commercial services instead of a strategic good. Excess capacity, low demand growth and lower product prices in major industrialized countries have forced power generators and their suppliers to be more concerned with the costs of their operations and profitability of their investments. These companies increasingly need a commercial, profit-oriented approach if they are to survive and prosper. Even more, they will need to make substantial cost reductions over the next few years. The nuclear industry is no exception. How does nuclear power stack up in this environment? The IAEA Planning and Economic Studies Section is doing a series of studies on precisely these questions, divided into issues affecting the near, medium and long-term future of nuclear power. This corresponds roughly to matters affecting existing plants, upgrades and life extensions, or new plants. In general, the studies find that nuclear power has the potential to be competitive in all three markets. But realizing that potential will require significant changes on the part of the industry and its regulators. This article focuses on the prevailing market situation in many industrialized countries. Several lessons also are applicable to developing countries, particularly in cases where the financing of electric power projects is expected to come from international capital markets. The overall situation is distinctly different for developing countries. Typically the capacity there for

  11. Vector Magnetometer Application with Moving Carriers

    Andrii Prystai

    2016-12-01

    magnetometers and it was concluded that the parameters of these magnetometers allow their using for the magnetic survey with moving platforms.

  12. Moving-Boundary Problems Associated with Lyopreservation

    Gruber, Christopher Andrew

    The work presented in this Dissertation is motivated by research into the preservation of biological specimens by way of vitrification, a technique known as lyopreservation. The operative principle behind lyopreservation is that a glassy material forms as a solution of sugar and water is desiccated. The microstructure of this glass impedes transport within the material, thereby slowing metabolism and effectively halting the aging processes in a biospecimen. This Dissertation is divided into two segments. The first concerns the nature of diffusive transport within a glassy state. Experimental studies suggest that diffusion within a glass is anomalously slow. Scaled Brownian motion (SBM) is proposed as a mathematical model which captures the qualitative features of anomalously slow diffusion while minimizing computational expense. This model is applied to several moving-boundary problems and the results are compared to a more well-established model, fractional anomalous diffusion (FAD). The virtues of SBM are based on the model's relative mathematical simplicity: the governing equation under FAD dynamics involves a fractional derivative operator, which precludes the use of analytical methods in almost all circumstances and also entails great computational expense. In some geometries, SBM allows similarity solutions, though computational methods are generally required. The use of SBM as an approximation to FAD when a system is "nearly classical'' is also explored. The second portion of this Dissertation concerns spin-drying, which is an experimental approach to biopreservation in a laboratory setting. A biospecimen is adhered to a glass wafer and this substrate is covered with sugar solution and rapidly spun on a turntable while water is evaporated from the film surface. The mathematical model for the spin-drying process includes diffusion, viscous fluid flow, and evaporation, among other contributions to the dynamics. Lubrication theory is applied to the model and an

  13. VT Digital Line Graph Railroads

    Vermont Center for Geographic Information — (Link to Metadata) This datalayer is comprised of major railroad lines for the state of Vermont. These railroad lines line up well along quadrangle boundaries, but...

  14. Sprayed concrete linings

    Hindle, D.

    1999-12-01

    Sprayed concrete, or shotcrete, was invented in the 1920s for preserving dinosaur skeletons and was used underground initially in coalmines for the preservation and fine proofing of timber supports. Its use as a support lining in rock tunnelling was developed in the 1950s and 60s. The article surveys equipment available from major manufacturers and suppliers of concrete spraying equipment (Aliva, Cifa, GIA, Industri, Ingersoll Rand, etc.), specialist cement and additive manufacturers (Castle, Cement, Moria Carbotech). manufacturers of lattice girders and fibre reinforcement, and manufacturers of instrumentation for tunnel linings. 5 tabs., 9 photos.

  15. HOT GAS LINES IN T TAURI STARS

    Ardila, David R.; Herczeg, Gregory J.; Gregory, Scott G.; Hillenbrand, Lynne A.; Ingleby, Laura; Bergin, Edwin; Bethell, Thomas; Calvet, Nuria; France, Kevin; Brown, Alexander; Edwards, Suzan; Johns-Krull, Christopher; Linsky, Jeffrey L.; Yang, Hao; Valenti, Jeff A.; Abgrall, Hervé; Alexander, Richard D.; Brown, Joanna M.; Espaillat, Catherine; Hussain, Gaitee

    2013-01-01

    For Classical T Tauri Stars (CTTSs), the resonance doublets of N V, Si IV, and C IV, as well as the He II 1640 Å line, trace hot gas flows and act as diagnostics of the accretion process. In this paper we assemble a large high-resolution, high-sensitivity data set of these lines in CTTSs and Weak T Tauri Stars (WTTSs). The sample comprises 35 stars: 1 Herbig Ae star, 28 CTTSs, and 6 WTTSs. We find that the C IV, Si IV, and N V lines in CTTSs all have similar shapes. We decompose the C IV and He II lines into broad and narrow Gaussian components (BC and NC). The most common (50%) C IV line morphology in CTTSs is that of a low-velocity NC together with a redshifted BC. For CTTSs, a strong BC is the result of the accretion process. The contribution fraction of the NC to the C IV line flux in CTTSs increases with accretion rate, from ∼20% to up to ∼80%. The velocity centroids of the BCs and NCs are such that V BC ∼> 4 V NC , consistent with the predictions of the accretion shock model, in at most 12 out of 22 CTTSs. We do not find evidence of the post-shock becoming buried in the stellar photosphere due to the pressure of the accretion flow. The He II CTTSs lines are generally symmetric and narrow, with FWHM and redshifts comparable to those of WTTSs. They are less redshifted than the CTTSs C IV lines, by ∼10 km s –1 . The amount of flux in the BC of the He II line is small compared to that of the C IV line, and we show that this is consistent with models of the pre-shock column emission. Overall, the observations are consistent with the presence of multiple accretion columns with different densities or with accretion models that predict a slow-moving, low-density region in the periphery of the accretion column. For HN Tau A and RW Aur A, most of the C IV line is blueshifted suggesting that the C IV emission is produced by shocks within outflow jets. In our sample, the Herbig Ae star DX Cha is the only object for which we find a P-Cygni profile in the C IV

  16. Trends in on-line data processing

    Masetti, M.

    1981-01-01

    The developement of integrated circuits has been characterized by an exponential growth of gates on a single chip that will still continue in the coming years. In parallel the price per bit is dropping down with more or less the same law. As a consequence of this a few statements can be made: The present 16-bit minicomputer in a small configuration is going to be substituted by a 16-bit microcomputer, and the 16-bit microcomputer in a powerful configuration by a 32-bit midi having also a virtual memory facility. Fully programmable or microcoded powerful devices like the LASS hardware processor or MICE, will allow an efficient on-line filter. Higher computing speed can be achieved by a multiprocessor configuration which can be insensitive to hardware failures. Therefore we are moving towards an integrated on-line computing system with much higher computing power than now and the present distinction between on-line and off-line will no longer be so sharp. As more processing can be performed on-line, fast high quality feed-back can be provided for the experiment. In the years to come the trend towards more processing power, at a lower price, and assembled in the same hardware volume will continue for at least five years; at the same time the future large high-energy physics experiments at LEP will be carried out within a wide international collaboration. In this environment methods must be found for a large fraction of the work to be distributed amongst the collaborators. To accomplish this aim it is necessary to introduce common standard practices concerning both hardware and software, in such a way that the seperate parts, developed by the collaborators, will be plug-compatible. (orig.)

  17. MOVES - A tool for Modeling and Verification of Embedded Systems

    Ellebæk, Jens; Knudsen, Kristian S.; Brekling, Aske Wiid

    2007-01-01

    We demonstrate MOVES, a tool which allows designers of embedded systems to explore possible implementations early in the design process. The demonstration of MOVES will show how designers can explore different designs by changing the mapping of tasks on processing elements, the number and/or spee...... of processing elements, the size of local memories, and the operating systems (scheduling algorithm)....

  18. Multiphase flow of immiscible fluids on unstructured moving meshes

    Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam

    2012-01-01

    In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...

  19. Current control by a homopolar machine with moving brushes

    Vogel, H.

    1978-01-01

    The equation for TNS Doublet's E-coil circuit with moving brush homopolar machine is integrated in the flux of the homopolar for a monotonically increasing current function extending beyond the current reversal into the burn period. The results show that the moving brush feature is not useful for controlling the burn

  20. Move of Purchasing Offices TS – AB* – AT*

    FI Department

    2008-01-01

    The TS – AB* - AT* Purchasing Offices and the Purchasing Pool have moved to Building 5 – 2nd and *3rd floors. The phone and fax numbers are unchanged. We apologize for any inconvenience caused by the move. Thank you for your understanding. Finance Department – Purchasing Service.

  1. Surface Explorations : 3D Moving Images as Cartographies of Time

    Verhoeff, N.

    2016-01-01

    Moving images of travel and exploration have a long history. In this essay I will examine how the trope of navigation in 3D moving images can work towards an intimate and haptic encounter with other times and other places – elsewhen and elsewhere. The particular navigational construction of space in

  2. Instability of a vehicle moving on an elastic structure

    Veritchev, S.N.

    2002-01-01

    Vibrations of a vehicle that moves on a long elastic structure can become unstable because of elastic waves that the vehicle generates in the structure. A typical example of the vehicle that can experience such instability is a high-speed train. Moving with a sufficiently high speed, this train

  3. A theory of traffic congestion at moving bottlenecks

    Kerner, Boris S [Daimler AG, GR/PTF, HPC: G021, 71059 Sindelfingen (Germany); Klenov, Sergey L, E-mail: boris.kerner@daimler.co [Department of Physics, Moscow Institute of Physics and Technology, 141700 Dolgoprudny, Moscow Region (Russian Federation)

    2010-10-22

    The physics of traffic congestion occurring at a moving bottleneck on a multi-lane road is revealed based on the numerical analyses of vehicular traffic with a discrete stochastic traffic flow model in the framework of three-phase traffic theory. We find that there is a critical speed of a moving bottleneck at which traffic breakdown, i.e. a first-order phase transition from free flow to synchronized flow, occurs spontaneously at the moving bottleneck, if the flow rate upstream of the bottleneck is great enough. The greater the flow rate, the higher the critical speed of the moving bottleneck. A diagram of congested traffic patterns at the moving bottleneck is found, which shows regions in the flow-rate-moving-bottleneck-speed plane in which congested patterns emerge spontaneously or can be induced through large enough disturbances in an initial free flow. A comparison of features of traffic breakdown and resulting congested patterns at the moving bottleneck with known ones at an on-ramp (and other motionless) bottleneck is made. Nonlinear features of complex interactions and transformations of congested traffic patterns occurring at on- and off-ramp bottlenecks due to the existence of the moving bottleneck are found. The physics of the phenomenon of traffic congestion due to 'elephant racing' on a multi-lane road is revealed.

  4. A theory of traffic congestion at moving bottlenecks

    Kerner, Boris S; Klenov, Sergey L

    2010-01-01

    The physics of traffic congestion occurring at a moving bottleneck on a multi-lane road is revealed based on the numerical analyses of vehicular traffic with a discrete stochastic traffic flow model in the framework of three-phase traffic theory. We find that there is a critical speed of a moving bottleneck at which traffic breakdown, i.e. a first-order phase transition from free flow to synchronized flow, occurs spontaneously at the moving bottleneck, if the flow rate upstream of the bottleneck is great enough. The greater the flow rate, the higher the critical speed of the moving bottleneck. A diagram of congested traffic patterns at the moving bottleneck is found, which shows regions in the flow-rate-moving-bottleneck-speed plane in which congested patterns emerge spontaneously or can be induced through large enough disturbances in an initial free flow. A comparison of features of traffic breakdown and resulting congested patterns at the moving bottleneck with known ones at an on-ramp (and other motionless) bottleneck is made. Nonlinear features of complex interactions and transformations of congested traffic patterns occurring at on- and off-ramp bottlenecks due to the existence of the moving bottleneck are found. The physics of the phenomenon of traffic congestion due to 'elephant racing' on a multi-lane road is revealed.

  5. Effectively Indexing Uncertain Moving Objects for Predictive Queries

    Zhang, Meihui; Chen, Su; Jensen, Christian Søndergaard

    2009-01-01

    in more complex and stochastic ways. This paper investigates the possibility of a marriage between moving-object indexing and probabilistic object modelling. Given the distributions of the current locations and velocities of moving objects, we devise an efficient inference method for the prediction...

  6. Multiphase Flow of Immiscible Fluids on Unstructured Moving Meshes

    Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam

    2013-01-01

    In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...

  7. My tablet is moving around, can I touch it?

    Catala, Alejandro; Theune, Mariët; Heylen, Dirk

    2017-01-01

    Touch displays moving autonomously, i.e., being self-Actuated, are starting to be part of system prototypes reported in the literature. In the future, user interactions with such prototypes may take place while the display is moving. However, since current prototypes do not yet require this type of

  8. Self-similarity of higher-order moving averages

    Arianos, Sergio; Carbone, Anna; Türk, Christian

    2011-10-01

    In this work, higher-order moving average polynomials are defined by straightforward generalization of the standard moving average. The self-similarity of the polynomials is analyzed for fractional Brownian series and quantified in terms of the Hurst exponent H by using the detrending moving average method. We prove that the exponent H of the fractional Brownian series and of the detrending moving average variance asymptotically agree for the first-order polynomial. Such asymptotic values are compared with the results obtained by the simulations. The higher-order polynomials correspond to trend estimates at shorter time scales as the degree of the polynomial increases. Importantly, the increase of polynomial degree does not require to change the moving average window. Thus trends at different time scales can be obtained on data sets with the same size. These polynomials could be interesting for those applications relying on trend estimates over different time horizons (financial markets) or on filtering at different frequencies (image analysis).

  9. Capture of a quantum particle by a moving trapping potential

    Shegelski, Mark R A; Poole, Tyler; Thompson, Cole

    2013-01-01

    We investigate the capture of a quantum particle in free space by a moving trapping potential. The capture is investigated for various initial conditions. We examine the dependence of the probability of capture on the shape and depth of the trapping potential, initial speed and mass of the particle, and other parameters. We take the trapping potential to move with an initial speed v 0 and to decelerate with constant acceleration a c until the well stops moving. We study the motion during the time the well is moving and after the well has stopped. We compare the probability of capture to the probability that the particle is in a stationary state (while the well is moving) and the probability the particle is in a bound state (after the well's motion has stopped). Our work could be of interest to instructors and students in upper-year undergraduate quantum mechanics courses. (paper)

  10. Glue-paste linings

    Fuster-López, Laura; Andersen, Cecil Krarup; Bouillon, Nicolas

    2017-01-01

    Glue-paste linings of (Western) canvas paintings have been performed with a variety of materials throughout history and are present in a very significant amount of artworks in collections in Europe and elsewhere. Cereal flours and animal glues were usually the main ingredients because they were r...

  11. Product line design

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  12. K-line photometry

    Henry, R.C.

    1979-01-01

    A brief review is given of more than a decade of work involving measurement of the strength of the K line of calcium in A-type stars. The effects of interstellar reddening are reexamined, and an improved estimate for the range in calcium abundance among field stars is obtained. (Auth.)

  13. SAF line pellet gaging

    Jedlovec, D.R.; Bowen, W.W.; Brown, R.L.

    1983-10-01

    Automated and remotely controlled pellet inspection operations will be utilized in the Secure Automated Fabrication (SAF) line. A prototypic pellet gage was designed and tested to verify conformance to the functions and requirements for measurement of diameter, surface flaws and weight-per-unit length

  14. Bike Map Lines

    Town of Chapel Hill, North Carolina — Chapel Hill Bike Map Lines from KMZ file.This data came from the wiki comment board for the public, not an “official map” showing the Town of Chapel Hill's plans or...

  15. Drawing the Line

    Holm, Isak Winkel

    2016-01-01

    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

  16. Developing Green Line Products

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  17. Magnetic field line Hamiltonian

    Boozer, A.H.

    1984-03-01

    The magnetic field line Hamiltonian and the associated canonical form for the magnetic field are important concepts both for understanding toroidal plasma physics and for practical calculations. A number of important properties of the canonical or Hamiltonian representation are derived and their importance is explained

  18. Lined canvas paintings

    Krarup Andersen, Cecil

    2013-01-01

    at 50% RH but increased the stress level severely in dry conditions and offered no support to the painting at 70-80 % RH. This means that the traditional glue-paste lining techniques and the wax-resin technique in high RH seem to limit the advisable RH fluctuation in a cultural institution. Conversely...

  19. LEAR: antiproton extraction lines

    Photographic Service

    1992-01-01

    Antiprotons, decelerated in LEAR to a momentum of 100 MeV/c (kinetic energy of 5.3 MeV), were delivered to the experiments in an "Ultra-Slow Extraction", dispensing some 1E9 antiprotons over times counted in hours. Beam-splitters and a multitude of beam-lines allowed several users to be supplied simultaneously.

  20. Labelling subway lines

    Garrido, M.A.; Iturriaga, C.; Márquez, A.; Portillo, J.R.; Reyes, P.; Wolff, A.; Eades, P.; Takaoka, T.

    2001-01-01

    Graphical features on map, charts, diagrams and graph drawings usually must be annotated with text labels in order to convey their meaning. In this paper we focus on a problem that arises when labeling schematized maps, e.g. for subway networks. We present algorithms for labeling points on a line

  1. Subjective poverty line definitions

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  2. Building with a Line

    Hubbert, Beth

    2011-01-01

    Architecture is a versatile, multifaceted area to study in the artroom with multiple age levels. It can easily stimulate a study of basic line, shape, and various other art elements and principles. It can then be extended into a more extensive study of architectural elements, styles, specific architects, architecture of different cultures, and…

  3. Biosynthesis: Reprogramming assembly lines

    Menon, Binuraj R. K.; Jenner, Matthew

    2018-03-01

    Rational engineering of biosynthetic assembly lines for production of new compounds is an attractive prospect, yet it presents many challenges. Learning from biology, some of the rules for expanding the chemical diversity of non-ribosomal peptides have been uncovered in two recent studies.

  4. Magnetic field line Hamiltonian

    Boozer, A.H.

    1985-02-01

    The basic properties of the Hamiltonian representation of magnetic fields in canonical form are reviewed. The theory of canonical magnetic perturbation theory is then developed and applied to the time evolution of a magnetic field embedded in a toroidal plasma. Finally, the extension of the energy principle to tearing modes, utilizing the magnetic field line Hamiltonian, is outlined

  5. Defining line replaceable units

    Parada Puig, J. E.; Basten, R. J I

    2015-01-01

    Defective capital assets may be quickly restored to their operational condition by replacing the item that has failed. The item that is replaced is called the Line Replaceable Unit (LRU), and the so-called LRU definition problem is the problem of deciding on which item to replace upon each type of

  6. Spectral line polarimetry with a channeled polarimeter.

    van Harten, Gerard; Snik, Frans; Rietjens, Jeroen H H; Martijn Smit, J; Keller, Christoph U

    2014-07-01

    Channeled spectropolarimetry or spectral polarization modulation is an accurate technique for measuring the continuum polarization in one shot with no moving parts. We show how a dual-beam implementation also enables spectral line polarimetry at the intrinsic resolution, as in a classic beam-splitting polarimeter. Recording redundant polarization information in the two spectrally modulated beams of a polarizing beam-splitter even provides the possibility to perform a postfacto differential transmission correction that improves the accuracy of the spectral line polarimetry. We perform an error analysis to compare the accuracy of spectral line polarimetry to continuum polarimetry, degraded by a residual dark signal and differential transmission, as well as to quantify the impact of the transmission correction. We demonstrate the new techniques with a blue sky polarization measurement around the oxygen A absorption band using the groundSPEX instrument, yielding a polarization in the deepest part of the band of 0.160±0.010, significantly different from the polarization in the continuum of 0.2284±0.0004. The presented methods are applicable to any dual-beam channeled polarimeter, including implementations for snapshot imaging polarimetry.

  7. Installation of the LHC transfer lines begins

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel.Pho...

  8. Installation of the LHC transfer lines begins

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system.Photo 01: Pictured with the newly installed magnet and transport system in the transfer line tunnel are (left to right) Volker Mertens, responsible for the LHC injection and transfer lines; personnel involved in tr...

  9. Installation of the LHC transfer lines begins

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel. Th...

  10. Installation of the LHC transfer lines begins

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel. We...

  11. Electrical Measurements on a Moving Argon Plasma

    Abbas, A. A.M.; Howatson, A. M. [Oxford University (United Kingdom)

    1966-10-15

    Experimental current-voltage characteristic curves were obtained for a moving argon plasma at two stations in an electrically-driven 5 cm shock tube. The standard energy was 1 kj and the base pressure 10 torr, giving a shock of about Mach 4. The measurements were made on the highly-ionized driver gas which followed the shock at speeds between 800 and 1100 m/sec. Two types of electrode were used. One comprised circular solid electrodes of aluminium, molybdenum or stainless steel so machined as to be quite flush with the tube wall; the other comprised filaments of tungsten wire which were immersed in the free stream and could be used cold or heated for thermionic emission. Characteristics were obtained both for applied voltages and for MHD-generated voltages; for the latter a magnetic field of good uniformity up to 0.9 Wb/m{sup 2} was used. The results were always markedly dependent on the surface condition of the electrodes. For consistent results the flush electrodes had to be cleaned carefully by hand after every third discharge, while the filament electrodes were thermionically cleaned before every discharge. In general the cold electrode characteristics for applied voltage showed three distinct regions: a current increase such as would be expected from a double probe; a saturation region; and a linear increase, in order of increasing voltage. For the flush electrodes another apparent saturation was found before, finally, the transition to an arc-type discharge. The first saturation current for flush electrodes corresponded to a random ion current much less than that estimated to exist away from the tube walls, as is expected from a consideration of diffusion through a boundary layer. The value of the current varied somewhat with the electrode material. For the cold filaments, the saturation current density was of the same order as for the flush electrodes. From the linear region of the curves, an effective plasma conductivity was obtained. For comparison, the

  12. Moving towards Hyper-Resolution Hydrologic Modeling

    Rouf, T.; Maggioni, V.; Houser, P.; Mei, Y.

    2017-12-01

    Developing a predictive capability for terrestrial hydrology across landscapes, with water, energy and nutrients as the drivers of these dynamic systems, faces the challenge of scaling meter-scale process understanding to practical modeling scales. Hyper-resolution land surface modeling can provide a framework for addressing science questions that we are not able to answer with coarse modeling scales. In this study, we develop a hyper-resolution forcing dataset from coarser resolution products using a physically based downscaling approach. These downscaling techniques rely on correlations with landscape variables, such as topography, roughness, and land cover. A proof-of-concept has been implemented over the Oklahoma domain, where high-resolution observations are available for validation purposes. Hourly NLDAS (North America Land Data Assimilation System) forcing data (i.e., near-surface air temperature, pressure, and humidity) have been downscaled to 500m resolution over the study area for 2015-present. Results show that correlation coefficients between the downscaled temperature dataset and ground observations are consistently higher than the ones between the NLDAS temperature data at their native resolution and ground observations. Not only correlation coefficients are higher, but also the deviation around the 1:1 line in the density scatterplots is smaller for the downscaled dataset than the original one with respect to the ground observations. Results are therefore encouraging as they demonstrate that the 500m temperature dataset has a good agreement with the ground information and can be adopted to force the land surface model for soil moisture estimation. The study has been expanded to wind speed and direction, incident longwave and shortwave radiation, pressure, and precipitation. Precipitation is well known to vary dramatically with elevation and orography. Therefore, we are pursuing a downscaling technique based on both topographical and vegetation

  13. So, You Want to Move out?!--An Awareness Program of the Real Costs of Moving Away from Home

    Hines, Steven L.; Hansen, Lyle; Falen, Christi

    2011-01-01

    The So, You Want To Move Out?! program was developed to help teens explore the financial realities of moving away from home. This 3-day camp program allows youth the opportunity to interview for a job, work, earn a paycheck, and pay financial obligations. After paying expenses and trying to put some money away in savings, the participants begin to…

  14. Method and system of measuring ultrasonic signals in the plane of a moving web

    Hall, Maclin S.; Jackson, Theodore G.; Wink, Wilmer A.; Knerr, Christopher

    1996-01-01

    An improved system for measuring the velocity of ultrasonic signals within the plane of moving web-like materials, such as paper, paperboard and the like. In addition to velocity measurements of ultrasonic signals in the plane of the web in the machine direction, MD, and a cross direction, CD, generally perpendicular to the direction of the traveling web, therefor, one embodiment of the system in accordance with the present invention is also adapted to provide on-line indication of the polar specific stiffness of the moving web. In another embodiment of the invention, the velocity of ultrasonic signals in the plane of the web are measured by way of a plurality of ultrasonic transducers carried by synchronously driven wheels or cylinders, thus eliminating undue transducer wear due to any speed differences between the transducers and the web. In order to provide relatively constant contact force between the transducers and the webs, the transducers are mounted in a sensor housings which include a spring for biasing the transducer radially outwardly. The sensor housings are adapted to be easily and conveniently mounted to the carrier to provide a relatively constant contact force between the transducers and the moving web.

  15. Can We Study Autonomous Driving Comfort in Moving-Base Driving Simulators? A Validation Study.

    Bellem, Hanna; Klüver, Malte; Schrauf, Michael; Schöner, Hans-Peter; Hecht, Heiko; Krems, Josef F

    2017-05-01

    To lay the basis of studying autonomous driving comfort using driving simulators, we assessed the behavioral validity of two moving-base simulator configurations by contrasting them with a test-track setting. With increasing level of automation, driving comfort becomes increasingly important. Simulators provide a safe environment to study perceived comfort in autonomous driving. To date, however, no studies were conducted in relation to comfort in autonomous driving to determine the extent to which results from simulator studies can be transferred to on-road driving conditions. Participants ( N = 72) experienced six differently parameterized lane-change and deceleration maneuvers and subsequently rated the comfort of each scenario. One group of participants experienced the maneuvers on a test-track setting, whereas two other groups experienced them in one of two moving-base simulator configurations. We could demonstrate relative and absolute validity for one of the two simulator configurations. Subsequent analyses revealed that the validity of the simulator highly depends on the parameterization of the motion system. Moving-base simulation can be a useful research tool to study driving comfort in autonomous vehicles. However, our results point at a preference for subunity scaling factors for both lateral and longitudinal motion cues, which might be explained by an underestimation of speed in virtual environments. In line with previous studies, we recommend lateral- and longitudinal-motion scaling factors of approximately 50% to 60% in order to obtain valid results for both active and passive driving tasks.

  16. Error Analysis of Fast Moving Target Geo-location in Wide Area Surveillance Ground Moving Target Indication Mode

    Zheng Shi-chao

    2013-12-01

    Full Text Available As an important mode in airborne radar systems, Wide Area Surveillance Ground Moving Target Indication (WAS-GMTI mode has the ability of monitoring a large area in a short time, and then the detected moving targets can be located quickly. However, in real environment, many factors introduce considerable errors into the location of moving targets. In this paper, a fast location method based on the characteristics of the moving targets in WAS-GMTI mode is utilized. And in order to improve the location performance, those factors that introduce location errors are analyzed and moving targets are relocated. Finally, the analysis of those factors is proved to be reasonable by simulation and real data experiments.

  17. Multiple Lines of Evidence

    Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Venzin, Alexander M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-03

    This paper discusses the process of identifying factors that influence the contamination level of a given decision area and then determining the likelihood that the area remains unacceptable. This process is referred to as lines of evidence. These lines of evidence then serve as inputs for the stratified compliance sampling (SCS) method, which requires a decision area to be divided into strata based upon contamination expectations. This is done in order to focus sampling efforts more within stratum where contamination is more likely and to use the domain knowledge about these likelihoods of the stratum remaining unacceptable to buy down the number of samples necessary, if possible. Two different building scenarios were considered as an example (see Table 3.1). SME expertise was elicited concerning four lines of evidence factors (see Table 3.2): 1) amount of contamination that was seen before decontamination, 2) post-decontamination air sampling information, 3) the applied decontaminant information, and 4) the surface material. Statistical experimental design and logistic regression modelling were used to help determine the likelihood that example stratum remained unacceptable for a given example scenario. The number of samples necessary for clearance was calculated by applying the SCS method to the example scenario, using the estimated likelihood of each stratum remaining unacceptable as was determined using the lines of evidence approach. The commonly used simple random sampling (SRS) method was also used to calculate the number of samples necessary for clearance for comparison purposes. The lines of evidence with SCS approach resulted in a 19% to 43% reduction in total number of samples necessary for clearance (see Table 3.6). The reduction depended upon the building scenario, as well as the level of percent clean criteria. A sensitivity analysis was also performed showing how changing the estimated likelihoods of stratum remaining unacceptable affect the number

  18. Synthesis of parallel and antiparallel core-shell triangular nanoparticles

    Bhattacharjee, Gourab; Satpati, Biswarup

    2018-04-01

    Core-shell triangular nanoparticles were synthesized by seed mediated growth. Using triangular gold (Au) nanoparticle as template, we have grown silver (Ag) shellto get core-shell nanoparticle. Here by changing the chemistry we have grown two types of core-shell structures where core and shell is having same symmetry and also having opposite symmetry. Both core and core-shell nanoparticles were characterized using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) to know the crystal structure and composition of these synthesized core-shell nanoparticles. From diffraction pattern analysis and energy filtered TEM (EFTEM) we have confirmed the crystal facet in core is responsible for such two dimensional growth of core-shell nanostructures.

  19. The last line effect explained

    Beller, M. (Moritz); Zaidman, A. (Andy); Karpov, A. (Andrey); R.A. Zwaan (Rolf)

    2017-01-01

    textabstractMicro-clones are tiny duplicated pieces of code; they typically comprise only few statements or lines. In this paper, we study the “Last Line Effect,” the phenomenon that the last line or statement in a micro-clone is much more likely to contain an error than the previous lines or

  20. The last line effect explained

    Beller, M.M.; Zaidman, A.E.; Karpov, Andrey; Zwaan, Rolf A.

    Micro-clones are tiny duplicated pieces of code; they typically comprise only few statements or lines. In this paper, we study the “Last Line Effect,” the phenomenon that the last line or statement in a micro-clone is much more likely to contain an error than the previous lines or statements. We do

  1. Moving standard deviation and moving sum of outliers as quality tools for monitoring analytical precision.

    Liu, Jiakai; Tan, Chin Hon; Badrick, Tony; Loh, Tze Ping

    2018-02-01

    An increase in analytical imprecision (expressed as CV a ) can introduce additional variability (i.e. noise) to the patient results, which poses a challenge to the optimal management of patients. Relatively little work has been done to address the need for continuous monitoring of analytical imprecision. Through numerical simulations, we describe the use of moving standard deviation (movSD) and a recently described moving sum of outlier (movSO) patient results as means for detecting increased analytical imprecision, and compare their performances against internal quality control (QC) and the average of normal (AoN) approaches. The power of detecting an increase in CV a is suboptimal under routine internal QC procedures. The AoN technique almost always had the highest average number of patient results affected before error detection (ANPed), indicating that it had generally the worst capability for detecting an increased CV a . On the other hand, the movSD and movSO approaches were able to detect an increased CV a at significantly lower ANPed, particularly for measurands that displayed a relatively small ratio of biological variation to CV a. CONCLUSION: The movSD and movSO approaches are effective in detecting an increase in CV a for high-risk measurands with small biological variation. Their performance is relatively poor when the biological variation is large. However, the clinical risks of an increase in analytical imprecision is attenuated for these measurands as an increased analytical imprecision will only add marginally to the total variation and less likely to impact on the clinical care. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  2. Dynamic path planning for autonomous driving on various roads with avoidance of static and moving obstacles

    Hu, Xuemin; Chen, Long; Tang, Bo; Cao, Dongpu; He, Haibo

    2018-02-01

    This paper presents a real-time dynamic path planning method for autonomous driving that avoids both static and moving obstacles. The proposed path planning method determines not only an optimal path, but also the appropriate acceleration and speed for a vehicle. In this method, we first construct a center line from a set of predefined waypoints, which are usually obtained from a lane-level map. A series of path candidates are generated by the arc length and offset to the center line in the s - ρ coordinate system. Then, all of these candidates are converted into Cartesian coordinates. The optimal path is selected considering the total cost of static safety, comfortability, and dynamic safety; meanwhile, the appropriate acceleration and speed for the optimal path are also identified. Various types of roads, including single-lane roads and multi-lane roads with static and moving obstacles, are designed to test the proposed method. The simulation results demonstrate the effectiveness of the proposed method, and indicate its wide practical application to autonomous driving.

  3. Perceptions Towards On-line Banking Security: An Empirical Investigation of a Developing Country`s Banking Sector, how secure is On-line Banking

    Bongani Ngwenya; Khanyisa Malufu

    2012-01-01

    The increase in computer crime has led to scepticism about themove made by the banks to introduce on-line banking. Someview this as a noble move which has made the banking systemmore efficient, reliable and secure, while others view it as arisky and insecure way of banking. The aim of this study wasto assess whether on-line banking in the developing countriesis secure or not. The researcher chose a descriptive-quantitativeresearch design. Data was collected using a self constructedquestionnai...

  4. Limit lines for risk

    Cox, D.C.; Baybutt, P.

    1982-01-01

    Approaches to the regulation of risk from technological systems, such as nuclear power plants or chemical process plants, in which potential accidents may result in a broad range of adverse consequences must take into account several different aspects of risk. These include overall or average risk, accidents posing high relative risks, the rate at which accident probability decreases with increasing accident consequences, and the impact of high frequency, low consequence accidents. A hypothetical complementary cumulative distribution function (CCDF), with appropriately chosen parametric form, meets all these requirements. The Farmer limit line, by contrast, places limits on the risks due to individual accident sequences, and cannot adequately account for overall risk. This reduces its usefulness as a regulatory tool. In practice, the CCDF is used in the Canadian nuclear licensing process, while the Farmer limit line approach, supplemented by separate qualitative limits on overall risk, is employed in the United Kingdom

  5. Draw the Line!

    present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM......Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

  6. SLIA beam line design

    Petillo, J.; Chernin, D.; Kostas, C.; Mondelli, A.

    1990-01-01

    The Spiral Line Induction Accelerator (SLIA) is a multi-kiloampere compact electron accelerator. It uses linear induction accelerator modules on the straight sections of a racetrack spiral, with strong-focusing bends to recirculate the electrons. The strong focusing is provided by stellarator windings on the bends. Stellarator coils are used to provide the strong focusing on the bends. The matching of the electron beam from a diode through a series of accelerator modules and stellarator bends is a major issue in the design of this accelerator. The beam line design for a proof-of-concept SLIA experiment (10 kA, 7 MeV) to be carried out at Pulse Sciences, Inc. will be presented. The design will demonstrate beam matching from element to element in the focusing system, the design of an achromatic bend, and the requirements for avoiding collective instabilities

  7. Line lessons: Enbridge's Northern Line provides valuable information

    Ross, E.

    2000-02-01

    Experiences gained from the 14-year old Norman Wells crude oil pipeline in the Northwest Territories may provide operators with valuable insights in natural gas pipeline developments in northern Canada. The Norman Wells line is the first and only long-distance pipeline in North America buried in permafrost and has proven to be a veritable laboratory on pipeline behaviour in extremely cold climates which also happen to be discontinuous at the same time. The line was built by Enbridge with a 'limit state' design, i e. it was built to move within the permafrost within certain limits, the amount of movement depending upon the area in which the line was built. This technology, which is still cutting edge, allows the pipeline to react to the freeze-thaw cycle without being affected by the heaving and resettling. The knowledge gained from the Norman Wells Line has come in very useful in the more recent AltaGas Services project transporting natural gas from a nearby well into the the town of Inuvik. Enbridge also contributed to the development of various pipeline inspection tools such as the 'Geopig' which travels within the pipeline and can pinpoint the location of problems practically within a matter of inches, and the 'Rolligon' an amphibious vehicle with five-foot diameter rubber tires that displaces only two pounds per square inch, leaving barely a track as it travels along the right-of-way during times other than winter.

  8. Remote mechanical C line

    Nuttall, K.R.; Gardner, P.R.

    1991-01-01

    Westinghouse Hanford Company is developing a desk-top simulation based training program on the operation of the Remote Mechanical C (RMC) Line process in the Plutonium Finishing Plant on the Hanford site, Richland, Washington. Simulations display aod contioually update current values of system parameters on computer graphics of RMC line equipment. Students are able to operate a variety of controllers to maintain proper system status. Programmed faults, selectable by the course instructor, can be used to test student responses to off-normal events. Prior to operation of the simulation, students are given computer-based tutorials on the function, processes, operation, and error conditions associated with individual components. By including the capability of operating each individual component - valves, heaters, agitators, etc. - the computer-based training (CBT) lessons become an interactive training manual. From one perspective RMC represents one step in the diffusion of the well-known and well-documented simulator training activities for nuclear reactor operators to other training programs, equally critical, perhaps, but less well scrutinized in the past. Because of the slowly responding nature of the actual process, RMC can retain many of the capabilities of practice and testing in a simulated work environment while avoiding the cost of a full scale simulator and the exposure and waste developed by practice runs of the RMC line. From another perspective RMC suggests training advances even beyond the most faithful simulators. For example, by integrating CBT lessons with the simulation, RMC permits students to focus in on specific processes occurring inside chosen components. In effect, the interactive training manual is available on-line with the simulation itself. Cost are also discussed

  9. Pink-line syndrome

    Ravindran J.; Raghukumar, C.; Manikandan, B.

    , a physiological crisis in the scleractinian coral Porites lutea. Marine biology 149: 347-356 7. Ravindran J, Raghukumar C (2006a) Histological observations on the scleractinian coral Porites lutea affected by pink-line syndrome. Current science... handbook: guidelines for assessment and monitoring. Currie Communications, Melbourne, Australia, 94p+App 10. Vargas-Angel B, Wheeler B (2009) Coral health and disease assessment in the US Pacific territories and affiliated states. Proc. 11th Coral Reef...

  10. Natural regeneration on seismic lines influences movement behaviour of wolves and grizzly bears.

    Finnegan, Laura; Pigeon, Karine E; Cranston, Jerome; Hebblewhite, Mark; Musiani, Marco; Neufeld, Lalenia; Schmiegelow, Fiona; Duval, Julie; Stenhouse, Gordon B

    2018-01-01

    Across the boreal forest of Canada, habitat disturbance is the ultimate cause of caribou (Rangifer tarandus caribou) declines. Habitat restoration is a focus of caribou recovery efforts, with a goal to finding ways to reduce predator use of disturbances, and caribou-predator encounters. One of the most pervasive disturbances within caribou ranges in Alberta, Canada are seismic lines cleared for energy exploration. Seismic lines facilitate predator movement, and although vegetation on some seismic lines is regenerating, it remains unknown whether vegetation regrowth is sufficient to alter predator response. We used Light Detection and Ranging (LiDAR) data, and GPS locations, to understand how vegetation and other attributes of seismic lines influence movements of two predators, wolves (Canis lupus) and grizzly bears (Ursus arctos). During winter, wolves moved towards seismic lines regardless of vegetation height, while during spring wolves moved towards seismic lines with higher vegetation. During summer, wolves moved towards seismic lines with lower vegetation and also moved faster near seismic lines with vegetation grizzly bears during spring and summer, but there was no relationship between vegetation height and grizzly bear movement rates. These results suggest that wolves use seismic lines for travel during summer, but during winter wolf movements relative to seismic lines could be influenced by factors additional to movement efficiency; potentially enhanced access to areas frequented by ungulate prey. Grizzly bears may be using seismic lines for movement, but could also be using seismic lines as a source of vegetative food or ungulate prey. To reduce wolf movement rate, restoration could focus on seismic lines with vegetation <1 m in height. However our results revealed that seismic lines continue to influence wolf movement behaviour decades after they were built, and even at later stages of regeneration. Therefore it remains unknown at what stage of natural

  11. Line managers as marketers.

    Rynne, T J

    1986-09-01

    Many hospital administrators and boards of directors, having overcome their initial opposition to advertising and hired a marketing professional, are wondering why their marketing programs have not accomplished all that they had hoped. The answer lies in their perception of who is responsible for marketing. Marketing is not a specialty separate from the disciplines of management--it is a basic management skill. Its goal is to satisfy the customer by providing products and services that meet the customer's needs, wants, and preferences. Line managers must understand the hospital's customers and make the critical day-to-day differences in satisfying them. They are the hospital's front-line marketers, and the marketing department's role is to support them in this function. The marketing department should develop the line managers' marketing skills by furnishing them with the appropriate tools: formats, models, examples, and instructions. In addition, the marketing staff should provide such specialized services as marketing research, ad agency management, and development of communications.

  12. Installation of the LHC transfer lines begins

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system. Here we see the transport vehicle alongside the magnet supports. Visible in the background is the first magnet in place.

  13. Method of lines solution of Richards` equation

    Kelley, C.T.; Miller, C.T.; Tocci, M.D.

    1996-12-31

    We consider the method of lines solution of Richard`s equation, which models flow through porous media, as an example of a situation in which the method can give incorrect results because of premature termination of the nonlinear corrector iteration. This premature termination arises when the solution has a sharp moving front and the Jacobian is ill-conditioned. While this problem can be solved by tightening the tolerances provided to the ODE or DAE solver used for the temporal integration, it is more efficient to modify the termination criteria of the nonlinear solver and/or recompute the Jacobian more frequently. In this paper we continue previous work on this topic by analyzing the modifications in more detail and giving a strategy on how the modifications can be turned on and off in response to changes in the character of the solution.

  14. Chromatic Shadow Detection and Tracking for Moving Foreground Segmentation

    Huerta, Ivan; Holte, Michael Boelstoft; Moeslund, Thomas B.

    2015-01-01

    are usually detected as part of moving objects, thus affecting the performance of the final detection. In this paper we address the detection of both penumbra and umbra shadow regions. First, a novel bottom-up approach is presented based on gradient and colour models, which successfully discriminates between...... chromatic moving cast shadow regions and those regions detected as moving objects. In essence, those regions corresponding to potential shadows are detected based on edge partitioning and colour statistics. Subsequently (i) temporal similarities between textures and (ii) spatial similarities between...

  15. A Moving Object Detection Algorithm Based on Color Information

    Fang, X H; Xiong, W; Hu, B J; Wang, L T

    2006-01-01

    This paper designed a new algorithm of moving object detection for the aim of quick moving object detection and orientation, which used a pixel and its neighbors as an image vector to represent that pixel and modeled different chrominance component pixel as a mixture of Gaussians, and set up different mixture model of Gauss for different YUV chrominance components. In order to make full use of the spatial information, color segmentation and background model were combined. Simulation results show that the algorithm can detect intact moving objects even when the foreground has low contrast with background

  16. Optimal moving grids for time-dependent partial differential equations

    Wathen, A. J.

    1992-01-01

    Various adaptive moving grid techniques for the numerical solution of time-dependent partial differential equations were proposed. The precise criterion for grid motion varies, but most techniques will attempt to give grids on which the solution of the partial differential equation can be well represented. Moving grids are investigated on which the solutions of the linear heat conduction and viscous Burgers' equation in one space dimension are optimally approximated. Precisely, the results of numerical calculations of optimal moving grids for piecewise linear finite element approximation of PDE solutions in the least-squares norm are reported.

  17. Controllability for a Wave Equation with Moving Boundary

    Lizhi Cui

    2014-01-01

    Full Text Available We investigate the controllability for a one-dimensional wave equation in domains with moving boundary. This model characterizes small vibrations of a stretched elastic string when one of the two endpoints varies. When the speed of the moving endpoint is less than 1-1/e, by Hilbert uniqueness method, sidewise energy estimates method, and multiplier method, we get partial Dirichlet boundary controllability. Moreover, we will give a sharper estimate on controllability time that only depends on the speed of the moving endpoint.

  18. On the Velocity of Moving Relativistic Unstable Quantum Systems

    K. Urbanowski

    2015-01-01

    Full Text Available We study properties of moving relativistic quantum unstable systems. We show that in contrast to the properties of classical particles and quantum stable objects the velocity of freely moving relativistic quantum unstable systems cannot be constant in time. We show that this new quantum effect results from the fundamental principles of the quantum theory and physics: it is a consequence of the principle of conservation of energy and of the fact that the mass of the quantum unstable system is not defined. This effect can affect the form of the decay law of moving relativistic quantum unstable systems.

  19. A CATALOG OF MOVING GROUP CANDIDATES IN THE SOLAR NEIGHBORHOOD

    Zhao Jingkun; Zhao Gang; Chen Yuqin

    2009-01-01

    Based on the kernel estimator and wavelet technique, we have identified 22 moving group candidates in the solar neighborhood from a sample which includes around 14,000 dwarfs and 6000 giants. Six of them were previously known as the Hercules stream, the Sirus-UMa stream, the Hyades stream, the Caster group, the Pleiades stream, and the IC 2391; five of them have also been reported by other authors. 11 moving group candidates, not previously reported in the literature, show prominent structures in dwarf or giant samples. A catalog of moving group candidates in the solar neighborhood is presented in this work.

  20. The Acceleration of Charged Particles at a Spherical Shock Moving through an Irregular Magnetic Field

    Giacalone, J. [Department of Planetary Sciences, University of Arizona, Tucson, AZ (United States)

    2017-10-20

    We investigate the physics of charged-particle acceleration at spherical shocks moving into a uniform plasma containing a turbulent magnetic field with a uniform mean. This has applications to particle acceleration at astrophysical shocks, most notably, to supernovae blast waves. We numerically integrate the equations of motion of a large number of test protons moving under the influence of electric and magnetic fields determined from a kinematically defined plasma flow associated with a radially propagating blast wave. Distribution functions are determined from the positions and velocities of the protons. The unshocked plasma contains a magnetic field with a uniform mean and an irregular component having a Kolmogorov-like power spectrum. The field inside the blast wave is determined from Maxwell’s equations. The angle between the average magnetic field and unit normal to the shock varies with position along its surface. It is quasi-perpendicular to the unit normal near the sphere’s equator, and quasi-parallel to it near the poles. We find that the highest intensities of particles, accelerated by the shock, are at the poles of the blast wave. The particles “collect” at the poles as they approximately adhere to magnetic field lines that move poleward from their initial encounter with the shock at the equator, as the shock expands. The field lines at the poles have been connected to the shock the longest. We also find that the highest-energy protons are initially accelerated near the equator or near the quasi-perpendicular portion of the shock, where the acceleration is more rapid.

  1. Beyond police crisis intervention: moving "upstream" to manage cases and places of behavioral health vulnerability.

    Wood, Jennifer D; Beierschmitt, Laura

    2014-01-01

    Law enforcement officers continue to serve on the front lines as mental health interventionists, and as such have been subject to a wave of "first generation" reform designed to enhance their crisis response capabilities. Yet, this focus on crisis intervention has not answered recent calls to move "upstream" and bolster early intervention in the name of long-term recovery. This paper reports on findings from an action research project in Philadelphia aimed at exploring opportunities for enhanced upstream engagement. Study methods include spatial analyses of police mental health transportations from an eight year period (2004-2011) and qualitative data from twenty-three "framing conversations" with partners and other stakeholders, seven focus groups with police and outreach workers, five key informant interviews as well as document reviews of the service delivery system in Philadelphia. Recommendations include the need to move beyond a focus on what police can do to a wider conception of city agencies and business stakeholders who can influence vulnerable people and vulnerable spaces of the city. We argue for the need to develop shared principles and rules of engagement that clarify roles and stipulate how best to enlist city resources in a range of circumstances. Since issues of mental health, substance use and disorder are so tightly coupled, we stress the importance of establishing a data-driven approach to crime and disorder reduction in areas of the city we term "hotspots of vulnerability". In line with a recovery philosophy, such an approach should reduce opportunities for anti-social behavior among the "dually labeled" in ways consistent with "procedural justice". Furthermore, crime and disorder data flowing from police and security to behavioral health analysts could contribute to a more focused case management of "repeat utilizers" across the two systems. Our central argument is that a twin emphasis on "case management" and "place management" may provide

  2. Thermal Rectification in Graded Nonlinear Transmission Lines

    Xu Wen; Chen Wei-Zhong; Tao Feng

    2011-01-01

    We consider heat conduction in a nonlinear inductance-capacitance (LC) transmission line with an inductance gradient by adding white-noise signals. It is found that the heat flux in the direction of inductance decrease is larger than that in the direction of inductance increase. When the low-inductance end is at higher temperature, the phonon density decreases due to conversion to high-frequency phonons, which can not move to the high-inductance end due to its lower cutoff frequency. However, when the high-inductance end is at higher temperature, the loss of phonon density can be compensated for because some high-frequency phonons can move to the low-inductance end dur to its higher cutoff frequency. This leads to the asymmetry of energy transfer. Discussion shows that this asymmetry exists in a particular range of temperatures, and increases with the increase of the difference between heat baths and the inductance gradient. (fundamental areas of phenomenology(including applications))

  3. An investigation of the challenges in reconstructing PET images of a freely moving animal

    Akhtar, Mahmood; Kyme, Andre; Meikle, Steven; Zhou, Victor; Fulton, Roger

    2013-01-01

    Imaging the brain of a freely moving small animal using positron emission tomography (PET) while simultaneously observing its behaviour is an important goal for neuroscience. While we have successfully demonstrated the use of line-of-response (LOR) rebinning to correct the head motion of confined animals, a large proportion of events may need to be discarded because they either 'miss' the detector array after transformation or fall out of the acceptance range of a sinogram. The proportion of events that would have been measured had motion not occurred, so-called 'lost events', is expected to be even larger for freely moving animals. Moreover, the data acquisition in the case of a freely moving animal is further complicated by a complex attenuation field. The aims of this study were (a) to characterise the severity of 'lost events' problem for the freely moving animal scenario, and (b) to investigate the relative impact of attenuation correction errors on quantitative accuracy of reconstructed images. A phantom study was performed to simulate the uncorrelated motion of a target and non-target source volume. A small animal PET scanner was used to acquire list-mode data for different sets of phantom positions. The list-mode data were processed using the standard LOR rebinning approach, and multiple frame variants of this designed to reduce discarded events. We found that LOR rebinning caused up to 86 % 'lost events', and artifacts that we attribute to incomplete projections, when applied to a freely moving target. This fraction was reduced by up to 18 % using the variant approaches, resulting in slightly reduced image artifacts. The effect of the non-target compartment on attenuation correction of the target volume was surprisingly small. However, for certain poses where the target and non-target volumes are aligned transaxially in the field-of-view, the attenuation problem becomes more complex and sophisticated correction methods will be required. We conclude that

  4. The notion of the motion: the neurocognition of motion lines in visual narratives.

    Cohn, Neil; Maher, Stephen

    2015-03-19

    Motion lines appear ubiquitously in graphic representation to depict the path of a moving object, most popularly in comics. Some researchers have argued that these graphic signs directly tie to the "streaks" appearing in the visual system when a viewer tracks an object (Burr, 2000), despite the fact that previous studies have been limited to offline measurements. Here, we directly examine the cognition of motion lines by comparing images in comic strips that depicted normal motion lines with those that either had no lines or anomalous, reversed lines. In Experiment 1, shorter viewing times appeared to images with normal lines than those with no lines, which were shorter than those with anomalous lines. In Experiment 2, measurements of event-related potentials (ERPs) showed that, compared to normal lines, panels with no lines elicited a posterior positivity that was distinct from the frontal positivity evoked by anomalous lines. These results suggested that motion lines aid in the comprehension of depicted events. LORETA source localization implicated greater activation of visual and language areas when understanding was made more difficult by anomalous lines. Furthermore, in both experiments, participants' experience reading comics modulated these effects, suggesting motion lines are not tied to aspects of the visual system, but rather are conventionalized parts of the "vocabulary" of the visual language of comics. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. "Let's Move" campaign: applying the extended parallel process model.

    Batchelder, Alicia; Matusitz, Jonathan

    2014-01-01

    This article examines Michelle Obama's health campaign, "Let's Move," through the lens of the extended parallel process model (EPPM). "Let's Move" aims to reduce the childhood obesity epidemic in the United States. Developed by Kim Witte, EPPM rests on the premise that people's attitudes can be changed when fear is exploited as a factor of persuasion. Fear appeals work best (a) when a person feels a concern about the issue or situation, and (b) when he or she believes to have the capability of dealing with that issue or situation. Overall, the analysis found that "Let's Move" is based on past health campaigns that have been successful. An important element of the campaign is the use of fear appeals (as it is postulated by EPPM). For example, part of the campaign's strategies is to explain the severity of the diseases associated with obesity. By looking at the steps of EPPM, readers can also understand the strengths and weaknesses of "Let's Move."

  6. Moving HammerCloud to CERN's private cloud

    Barrand, Quentin

    2013-01-01

    HammerCloud is a testing framework for the Worldwide LHC Computing Grid. Currently deployed on about 20 hand-managed machines, it was desirable to move it to the Agile Infrastructure, CERN's OpenStack-based private cloud.

  7. Product Manager C4ISR On-The-Move Experimentation

    Utroska, William; Langan, Russell; Amabile, Michael

    2006-01-01

    Product Manager C4ISR On-The-Move (PM C4ISR OTM) provides a relevant operational field experimentation venue for the purpose of assessing emerging technologies in a System-of- Systems (SoS) environment...

  8. Capacity gains of buffer-aided moving relays

    Zafar, Ammar

    2017-03-14

    This work investigates the gain due to reduction in path loss by deploying buffer-aided moving relaying. In particular, the increase in gain due to moving relays is studied for dual-hop broadcast channels and the bidirectional relay channel. It is shown that the exploited gains in these channels due to buffer-aided relaying can be enhanced by utilizing the fact that a moving relay can communicate with the terminal closest to it and store the data in the buffer and then forward the data to the intended destination when it comes in close proximity with the destination. Numerical results show that for both the considered channels the achievable rates are increased as compared to the case of stationary relays. Numerical results also show that more significant increase in performance is seen when the relay moves to-and-fro between the source and the relay.

  9. Moving Zimbabwe Forward : an Evidence Based Policy Dialogue ...

    Moving Zimbabwe Forward : an Evidence Based Policy Dialogue ... levels of poverty, unemployment, inflation and poor service provision in the areas of education, ... International Water Resources Association, in close collaboration with IDRC, ...

  10. Surrounding Moving Obstacle Detection for Autonomous Driving Using Stereo Vision

    Hao Sun

    2013-06-01

    Full Text Available Detection and tracking surrounding moving obstacles such as vehicles and pedestrians are crucial for the safety of mobile robotics and autonomous vehicles. This is especially the case in urban driving scenarios. This paper presents a novel framework for surrounding moving obstacles detection using binocular stereo vision. The contributions of our work are threefold. Firstly, a multiview feature matching scheme is presented for simultaneous stereo correspondence and motion correspondence searching. Secondly, the multiview geometry constraint derived from the relative camera positions in pairs of consecutive stereo views is exploited for surrounding moving obstacles detection. Thirdly, an adaptive particle filter is proposed for tracking of multiple moving obstacles in surrounding areas. Experimental results from real-world driving sequences demonstrate the effectiveness and robustness of the proposed framework.

  11. Why superconducting vortices follow to moving hot sport?

    Sergeev, Andrei; Michael, Reizer

    Recent experiments reported in Nature Comm. 7, 12801, 2016 show that superconducting vortices follow to the moving hot sport created by a focused laser beam, i.e. vortices move from the cold area to the moving hot area. This behavior is opposite to the vortex motion observed in numerous measurements of the vortex Nernst effect, where vortices always move against the temperature gradient. Taking into account that superconducting magnetization currents do not transfer entropy, we analyze the balance of forces acting on a vortex in stationary and dynamic temperature gradients. We show that the dynamic measurements may be described by a single vortex approximation, while in stationary measurements interaction between vortices is critical. Supported by NRC.

  12. Measurement of vertical track deflection from a moving rail car.

    2013-02-01

    The University of Nebraska has been conducting research sponsored by the Federal Railroad Administrations Office of Research and Development to develop a system that measures vertical track deflection/modulus from a moving rail car. Previous work ...

  13. Computing moving and intermittent queue propagation in highway work zones.

    2012-07-01

    Drivers may experience intermittent congestion and moving queue conditions in work zones due to several reasons such as presence of lane closure, roadway geometric changes, higher demand, lower speed, and reduced capacity. The congestion and queue ha...

  14. Capacity gains of buffer-aided moving relays

    Zafar, Ammar; Shaqfeh, Mohammad; Alnuweiri, Hussein; Alouini, Mohamed-Slim

    2017-01-01

    This work investigates the gain due to reduction in path loss by deploying buffer-aided moving relaying. In particular, the increase in gain due to moving relays is studied for dual-hop broadcast channels and the bidirectional relay channel. It is shown that the exploited gains in these channels due to buffer-aided relaying can be enhanced by utilizing the fact that a moving relay can communicate with the terminal closest to it and store the data in the buffer and then forward the data to the intended destination when it comes in close proximity with the destination. Numerical results show that for both the considered channels the achievable rates are increased as compared to the case of stationary relays. Numerical results also show that more significant increase in performance is seen when the relay moves to-and-fro between the source and the relay.

  15. Residential mobility of populations near UK power lines and implications for childhood leukaemia

    Swanson, John

    2013-01-01

    Epidemiological studies suggest associations between childhood leukaemia and living near high-voltage power lines, but the most obvious potential causative agent, the magnetic fields produced by the power lines, is not supported by laboratory studies or a known mechanism. An alternative hypothesised explanation is if there is greater population mobility near power lines, linking to the findings of Kinlen that population mixing increases leukaemia rates. We used the names recorded in electoral registers to see whether people near power lines move house more often than the population as a whole. We did find variations, but only small ones, and not such as to support the hypothesis. (note)

  16. STUDYING PRESCHOOL CHILDREN’S REASONING THROUGH EPISTEMOLOGICAL MOVE ANALYSIS

    Sumpter, Lovisa; Hedefalk, Maria

    2017-01-01

    In this paper, we propose a theoretical tool for analysing mathematical reasoning using Epistemological Move Analysis (EMA) in combination with a framework focusing on arguments and the foundation of these. We also suggest the addition of evaluative arguments when talking about different types of arguments besides predictive and verifying arguments. The tool was applied on data of preschool children’s mathematical reasoning. The results indicate that different types of epistemological moves a...

  17. A moving mesh method with variable relaxation time

    Soheili, Ali Reza; Stockie, John M.

    2006-01-01

    We propose a moving mesh adaptive approach for solving time-dependent partial differential equations. The motion of spatial grid points is governed by a moving mesh PDE (MMPDE) in which a mesh relaxation time \\tau is employed as a regularization parameter. Previously reported results on MMPDEs have invariably employed a constant value of the parameter \\tau. We extend this standard approach by incorporating a variable relaxation time that is calculated adaptively alongside the solution in orde...

  18. Interpersonal closeness and morality predict feelings of being moved

    Seibt, C.; Schubert, T. W.; Zickfeld, J. H.; Fiske, A. P.

    2017-01-01

    The emotion commonly labeled in English as being moved or touched is widely experienced but only tacitly defined, and has received little systematic attention. Based on a review of conceptualizations from various disciplines, we hypothesize that events appraised as an increase in interpersonal closeness, or as moral acts, when sufficiently intense, elicit a positive emotion typically labeled “being moved,” and characterized by tears, goosebumps, and a feeling of warmth in the chest. We predic...

  19. Moving blade for steam turbines with axial flow

    Raschke, K.; Wehle, G.

    1976-01-01

    The invention concerns the improvement of the production of moving blades for steam turbines with axial flow, especially of multi-blades produced by welding of the top plates. It is proposed to weld the top plates before the moving blades are fitted into the rotor. Welding is this made much easier and can be carried out under protective gas and with better results. (UWI) [de

  20. Maintenance of order in a moving strong condensate

    Whitehouse, Justin; Costa, André; Blythe, Richard A; Evans, Martin R

    2014-01-01

    We investigate the conditions under which a moving condensate may exist in a driven mass transport system. Our paradigm is a minimal mass transport model in which n − 1 particles move simultaneously from a site containing n > 1 particles to the neighbouring site in a preferred direction. In the spirit of a zero-range process the rate u(n) of this move depends only on the occupation of the departure site. We study a hopping rate u(n) = 1 + b/n α numerically and find a moving strong condensate phase for b > b c (α) for all α > 0. This phase is characterised by a condensate that moves through the system and comprises a fraction of the system's mass that tends to unity. The mass lost by the condensate as it moves is constantly replenished from the trailing tail of low occupancy sites that collectively comprise a vanishing fraction of the mass. We formulate an approximate analytical treatment of the model that allows a reasonable estimate of b c (α) to be obtained. We show numerically (for α = 1) that the transition is of mixed order, exhibiting a discontinuity in the order parameter as well as a diverging length scale as b↘b c . (paper)