Report of the workshop on accelerator-based atomic and molecular science

International Nuclear Information System (INIS)

Meyerhof, W.E.

1981-01-01

This Workshop, held in New London, NH on July 27-30, 1980, had a registration of 43, representing an estimated one-third of all principal investigators in the United States in this research subfield. The workshop was organized into 5 working groups for the purpose of (1) identifying some vital physics problems which experimental and theoretical atomic and molecular science can address with current and projected techniques; (2) establishing facilities and equipment needs required to realize solutions to these problems; (3) formulating suggestions for a coherent national policy concerning this discipline; (4) assessing and projecting the manpower situation; and (5) evaluating the relations of this interdisciplinary science to other fields. Recommedations deal with equipment and operating costs for small accelerator laboratories, especially at universities; instrumentation of ion beam lines dedicated to atomic and molecular science at some large accelerators; development of low-velocity, high charge-state ion sources; synchrotron light sources; improvement or replacement of tandem van de Graaff accelerators; high-energy beam lines for atomic physics; the needs for postdoctoral support in this subfield; new accelerator development; need for representatives from atomic and molecular science on program committees for large national accelerator facilities; and the contributions the field can make to applied physics problems

Risk-based equipment removal guide for on-line maintenance at PSE ampersand G

International Nuclear Information System (INIS)

Knoll, A.; Smith, C.; Pollock, J.

1995-01-01

On-line maintenance plays an important role in achieving safe and reliable power generation in a nuclear power plant. However, maintenance, if not properly planned and performed, may also be an important contributor to plant risk. Therefore, plant-specific procedures are needed for equipment removal from service to enhance the benefits of on-line maintenance and minimize the risks involved. The problem is to identify and implement the most effective on-line maintenance policy in the form of a proceduralized guide to assure plant safety under various operation and maintenance constraints. This paper presents a methodology to develop plant-specific on-line maintenance strategies and acceptance criteria using a multivariate safety approach based on risk assessment. Based on plant-specific data as modeled in the individual plant evaluation (IPE) and the updated probabilistic safety assessment (PSA), the risk-based methodology is currently being applied to the development of proceduralized equipment removal guides at Hope Creek and Salem units 1 and 2 of Public Service Electric and Gas Company (PSE ampersand G)

Space and Architecture's Current Line of Research? A Lunar Architecture Workshop With An Architectural Agenda.

Science.gov (United States)

Solomon, D.; van Dijk, A.

The "2002 ESA Lunar Architecture Workshop" (June 3-16) ESTEC, Noordwijk, NL and V2_Lab, Rotterdam, NL) is the first-of-its-kind workshop for exploring the design of extra-terrestrial (infra) structures for human exploration of the Moon and Earth-like planets introducing 'architecture's current line of research', and adopting an architec- tural criteria. The workshop intends to inspire, engage and challenge 30-40 European masters students from the fields of aerospace engineering, civil engineering, archi- tecture, and art to design, validate and build models of (infra) structures for Lunar exploration. The workshop also aims to open up new physical and conceptual terrain for an architectural agenda within the field of space exploration. A sound introduc- tion to the issues, conditions, resources, technologies, and architectural strategies will initiate the workshop participants into the context of lunar architecture scenarios. In my paper and presentation about the development of the ideology behind this work- shop, I will comment on the following questions: * Can the contemporary architectural agenda offer solutions that affect the scope of space exploration? It certainly has had an impression on urbanization and colonization of previously sparsely populated parts of Earth. * Does the current line of research in architecture offer any useful strategies for com- bining scientific interests, commercial opportunity, and public space? What can be learned from 'state of the art' architecture that blends commercial and public pro- grammes within one location? * Should commercial 'colonisation' projects in space be required to provide public space in a location where all humans present are likely to be there in a commercial context? Is the wave in Koolhaas' new Prada flagship store just a gesture to public space, or does this new concept in architecture and shopping evolve the public space? * What can we learn about designing (infra-) structures on the Moon or any other

On-Line Radiation Test Facility for Industrial Equipment needed for the Large Hadron Collider at CERN

CERN Document Server

Rausch, R

1999-01-01

The future Large Hadron Collider to be built at CERN will use superconducting magnets cooled down to 1.2 K. To preserve the superconductivity, the energy deposition dose levels in equipment located outside the cryostat, in the LHC tunnel, are calculated to be of the order of 1 to 10 Gy per year. At such dose levels, no major radiation-damage problems are to be expected, and the possibility of installing Commercial Of The Shelf (COTS) electronic equipment in the LHC tunnel along the accelerator is considered. To this purpose, industrial electronic equipment and circuits have to be qualified and tested against radiation to insure their long term stability and reliability. An on-line radiation test facility has been setup at the CERN Super Proton Synchrotron (SPS) and a program of on-line tests for electronic equipment is ongoing. Equipment tested includes Industrial Programmable Logic Controllers (PLCs) from several manufacturers, standard VME modules, Fieldbuses like Profibus, WorldFIP and CAN, various electro...

Report of On-Site Inspection Workshop-19

Energy Technology Data Exchange (ETDEWEB)

Sweeney, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-07-12

The objective of this workshop was to carry out discussions on the OSI Equipment List for the initial period techniques and to provide further contribution to the development of the OSI Equipment List. The report of the 36th session of WGB included guidance to develop corresponding concepts of operations for the equipment, identify logistics and infrastructure requirements, and to address software issues related to the equipment.

Workshop on accelerator magnet superconductors. Proceedings

International Nuclear Information System (INIS)

2004-01-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors

Workshop on accelerator magnet superconductors. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors.

A modelling approach for railway overhead line equipment asset management

OpenAIRE

Kilsby, Paul; Remenyte-Prescott, Rasa; Andrews, John

2017-01-01

The Overhead Line Equipment (OLE) is a critical sub-system of the 25kV AC overhead railway electrification system. If OLE asset management strategies can be evaluated using a whole lifecycle cost analysis that considers degradation processes and maintenance activities of the OLE components, the investment required to deliver the level of performance desired by railway customers and regulators can be based on evidence from the analysis results. A High Level Petri Net (HLPN) model, proposed in ...

Stakeholder Views of Nanosilver Linings: Macroethics Education and Automated Text Analysis Through Participatory Governance Role Play in a Workshop Format.

Science.gov (United States)

Dempsey, Joshua; Stamets, Justin; Eggleson, Kathleen

2017-06-01

The Nanosilver Linings role play case offers participants first-person experience with interpersonal interaction in the context of the wicked problems of emerging technology macroethics. In the fictional scenario, diverse societal stakeholders convene at a town hall meeting to consider whether a nanotechnology-enabled food packaging industry should be offered incentives to establish an operation in their economically struggling Midwestern city. This original creative work was built with a combination of elements, selected for their established pedagogical efficacy (e.g. active learning, case-based learning) and as topical dimensions of the realistic scenario (e.g. nanosilver in food packaging, occupational safety and health). The product life cycle is used as a framework for integrated consideration of scientific, societal, and ethical issues. The Nanosilver Linings hypothetical case was delivered through the format of the 3-hour workshop Ethics when Biocomplexity meets Human Complexity, providing an immersive, holistic ethics learning experience for STEM graduate students. Through their participation in the Nanosilver Linings case and Ethics when Biocomplexity meets Human Complexity workshop, four cohorts of science and engineering doctoral students reported the achievement of specific learning objectives pertaining to a range of macroethics concepts and professional practices, including stakeholder perspectives, communication, human values, and ethical frameworks. Automated text analysis of workshop transcripts revealed differences in sentiment and in ethical framework (consequentialism/deontology) preference between societal stakeholder roles. These resources have been recognized as ethics education exemplars by the U.S. National Academy of Engineering .

Effectiveness of the credit-line approach for support of CD4 equipment functionality in northern Uganda

Directory of Open Access Journals (Sweden)

Michael L. Kasusse

2015-11-01

Full Text Available Background: Improving laboratory service delivery requires a functioning logistics and supply system. Uganda’s Ministry of Health uses the credit-line approach to provide laboratory supplies including commodities for CD4 test equipment. Objectives: We examined the effectiveness of the credit-line approach in improving laboratoryservice delivery by using the functionality of CD4 test equipment as a proxy indicator. Method: A cross-sectional survey was conducted at 7 level-three health centres (HC IIIs, 18 level-four health centres (HC IVs, and 10 hospitals in 15 districts of mid-northern Uganda, including the Lango (17 facilities and Acholi sub-regions (18 facilities, between July 2013 and August 2013. Functionality, was determined through self- and interviewer-administered questionnaires. The chi-squared test was used to assess differences in functionality by subregion, facility type, and equipment type. Results: A total of 38 CD4 test analysers were assessed. Of these, 26 (68% were functional. In hospitals, 85% of CD4 analysers were functional, in HC IVs, 67% were functional and in HCIIIs, 43% were functional. The differences did not reach statistical significance. In the Langosub-region, 72% of analysers were functional; in the Acholi sub-region, 65% were functional. Non-functionality was mainly due to lack of reagents and cartridges, as well as low staffing levels of laboratory technicians with the skills necessary to operate the equipment. Conclusion: The credit-line approach supported the functionality of CD4 equipment in the surveyed facilities. However, there is a need to address issues of staffing and availability of reagents to enhance the functionality of CD4 equipment and improve patient care, especiallyat HC IIIs.

Division of Scientific Equipment - Overview

International Nuclear Information System (INIS)

Halik, J.

2002-01-01

Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: * designs of devices and equipment for experiments in physics; their mechanical construction and assembly. In particular, these are vacuum chambers and installations for HV and UHV;* maintenance and upgrading of the existing installations and equipment in our Institute; * participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and an A0 plotter, which allow us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop offers a wide range of machining and treatment methods with satisfactory tolerances and surface quality. They include: * turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc type elements of a diameter up to 600 mm and a length not exceeding 300 mm, * milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm, * grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm, * drilling - holes of a diameter up to 50 mm, * welding - electrical and gas welding, including TIG vacuum-tight welding, * soft and hard soldering, * mechanical works including precision engineering, * plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides, * painting - paint spraying with possibility of using furnace-fired drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop is equipped with the CNC milling machine which can be used for machining of work pieces up to 500 kg. The machine

Feasibility of evaluating possible 85Kr environmental contamination from neon lamp production line to be installed

International Nuclear Information System (INIS)

Li Guangzuo

1989-01-01

Using a simplified method, the concentrations of 85 Kr leaking into the air of a workshop and its surroundings, where a neon lamp production line was to be installed, were calculated. The doses to the workers and inhabitants nearby were also estimated. Thus, the evaluation of 85 Kr enviromental contamination caused by imported equipments was made feasible

Measurement value analysis overall equipment effectiveness (OEE) packaging process in line 2 (Case Study of PT. MBI Tbk)

Science.gov (United States)

Rimawan, Erry; Kholil, Muhammad; Hendri

2018-03-01

PT. MBI Tbk is engaged in the manufacture of beverage industry, where the company’s production is based on the magnitude of customer demand that is marketing offices that had been scattered in various regions of Indonesia. In the packaging process steps in PT.MBI through the line 3 lines including racking, canning line, bottling line. In the canning process to existing packing on Line 2 (canning line), there are some machines that are used continuously, among other Depalletizer machine, filler machine, can seamer machine, pasteurizer machine, machine FLD, Wrap Around engine, engine Shrink Wrap. Due to the large demand from customers that is relentless, therefore the calculation of overall equipment effectiveness (OEE) as a whole on line 2 (canning line) is needed in order to make improvements continuously (Continuous Improvement) at line 2 (canning line). This study aims to determine the value of overall equipment effectiveness (OEE) and Losses of the most influential of the big six OEE Losses focused on equipment or machinery as a whole into a single unit that is on the line 2, which will then be known root cause of the losses that occur from the research over the field. From the calculation of overall equipment effectiveness (OEE), there are two ratios are still poor and under world-class standards, while the ratio of the availability of 88.85% of the world-class standards by 90% and the performance ratio of 78.51% of the standard world class by 95%, whereas for quality ratio has entered the world-class standard that is equal to 99.90%. Thus the value of OEE on Line 2 line is below world class standards. In this study there were only five losses, which can be identified, and while the losses were very influential, namely the Speed Reduced Losses, losses, these losses accounted for the largest percentage of the value of the rate of 19.12%, of the results of this study losses occurred due to poor surveillance systems (less good) that causes the employee or

Cryogenics Vision Workshop for High-Temperature Superconducting Electric Power Systems Proceedings

International Nuclear Information System (INIS)

Energetics, Inc.

2000-01-01

The US Department of Energy's Superconductivity Program for Electric Systems sponsored the Cryogenics Vision Workshop, which was held on July 27, 1999 in Washington, D.C. This workshop was held in conjunction with the Program's Annual Peer Review meeting. Of the 175 people attending the peer review meeting, 31 were selected in advance to participate in the Cryogenics Vision Workshops discussions. The participants represented cryogenic equipment manufactures, industrial gas manufacturers and distributors, component suppliers, electric power equipment manufacturers (Superconductivity Partnership Initiative participants), electric utilities, federal agencies, national laboratories, and consulting firms. Critical factors were discussed that need to be considered in describing the successful future commercialization of cryogenic systems. Such systems will enable the widespread deployment of high-temperature superconducting (HTS) electric power equipment. Potential research, development, and demonstration (RD and D) activities and partnership opportunities for advancing suitable cryogenic systems were also discussed. The workshop agenda can be found in the following section of this report. Facilitated sessions were held to discuss the following specific focus topics: identifying Critical Factors that need to be included in a Cryogenics Vision for HTS Electric Power Systems (From the HTS equipment end-user perspective) identifying R and D Needs and Partnership Roles (From the cryogenic industry perspective) The findings of the facilitated Cryogenics Vision Workshop were then presented in a plenary session of the Annual Peer Review Meeting. Approximately 120 attendees participated in the afternoon plenary session. This large group heard summary reports from the workshop session leaders and then held a wrap-up session to discuss the findings, cross-cutting themes, and next steps. These summary reports are presented in this document. The ideas and suggestions raised during

Measuring MFT's Mental Health Literacy and Competence: The Effects of an On-Line Introductory Workshop on Eating Disorders

Science.gov (United States)

Beck-Ellsworth, Danielle

2011-01-01

Purpose of study: The purpose of the validity study was to establish known-groups validity of the two measures used for the main study by comparing the responses of the Eating Disorder experts and non-experts. The purpose of the main study was to develop an on-line introductory workshop on eating disorders and investigate the levels of competency…

Feasibility of evaluating possible sup 85 Kr environmental contamination from neon lamp production line to be installed

Energy Technology Data Exchange (ETDEWEB)

Guangzuo, Li [Chengdu Sanitary-Epidemiological Station, Chengdu, SC (China)

1989-12-01

Using a simplified method, the concentrations of {sup 85}Kr leaking into the air of a workshop and its surroundings, where a neon lamp production line was to be installed, were calculated. The doses to the workers and inhabitants nearby were also estimated. Thus, the evaluation of {sup 85}Kr enviromental contamination caused by imported equipments was made feasible.

Integrated configurable equipment selection and line balancing for mass production with serial-parallel machining systems

Science.gov (United States)

Battaïa, Olga; Dolgui, Alexandre; Guschinsky, Nikolai; Levin, Genrikh

2014-10-01

Solving equipment selection and line balancing problems together allows better line configurations to be reached and avoids local optimal solutions. This article considers jointly these two decision problems for mass production lines with serial-parallel workplaces. This study was motivated by the design of production lines based on machines with rotary or mobile tables. Nevertheless, the results are more general and can be applied to assembly and production lines with similar structures. The designers' objectives and the constraints are studied in order to suggest a relevant mathematical model and an efficient optimization approach to solve it. A real case study is used to validate the model and the developed approach.

Experimental equipment for an advanced ISOL facility

International Nuclear Information System (INIS)

Baktash, C.; Lee, I.Y.; Rehm, K.E.

1999-01-01

This report summarizes the proceedings and recommendations of the Workshop on the Experimental Equipment for an Advanced ISOL Facility which was held at Lawrence Berkeley National Laboratory on July 22--25, 1998. The purpose of this workshop was to discuss the performance requirements, manpower and cost estimates, as well as a schedule of the experimental equipment needed to fully exploit the new physics which can be studied at an advanced ISOL facility. An overview of the new physics opportunities that would be provided by such a facility has been presented in the White Paper that was issued following the Columbus Meeting. The reactions and experimental techniques discussed in the Columbus White Paper served as a guideline for the formulation of the detector needs at the Berkeley Workshop. As outlined a new ISOL facility with intense, high-quality beams of radioactive nuclei would provide exciting new research opportunities in the areas of: the nature of nucleonic matter; the origin of the elements; and tests of the Standard Model. After an introductory section, the following equipment is discussed: gamma-ray detectors; recoil separators; magnetic spectrographs; particle detectors; targets; and apparatus using non-accelerated beams

33 CFR 157.12f - Workshop functional test requirements.

Science.gov (United States)

2010-07-01

... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.12f Workshop functional test requirements... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Workshop functional test requirements. 157.12f Section 157.12f Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND...

Summary of experimental insertions workshop

International Nuclear Information System (INIS)

Sandweiss, J.; Month, M.

1976-01-01

The last ISABELLE workshop of the summer 1976 series, which was held at Brookhaven, August 16-20, focused on the design and utilization of the experimental insertions. The goals of the workshop, which were somewhat more general than might be suggested by the title, are: (1) review the ISABELLE proposal from the point of view of experimental use; (2) contribute useful information on the ''open questions'' in the ISABELLE design; (3) develop data for experimental equipment and operating cost estimates; and (4) project a first approximation to ISABELLE operating modes

Research, Calculation for Designing the Technological Equipment Line of Cementation with 3,000 Tonnes of Solid Waste/Year Capacity for ZOC Plan

International Nuclear Information System (INIS)

Tran Van Hoa; Ngo Van Tuyen; Nguyen Ba Tien; Le Ba Thuan; Phung Quoc Khanh; Mai Duc Lanh; Vuong Huu Anh; Luu Cao Nguyen; Duong Dinh Tho; Phung Vu Phong; Nguyen An Thai; Pham Quang Minh

2013-01-01

Technological process and equipment line for cementation with 3,000 tons of solid wastes/year capacity for ZOC plant was studied according to the quantity, the composition and the property of solid wastes from ZOC plant. The influence of several parameters with cementation process such as cement mixing ratio, size, moisture and NaCl content in residue, which affected to mechanical and chemical strength of waste block after cementation was evaluated. The calculation and designing for cementation equipment line were thus conducted and total investment cost of construction and installation as well as operation of this equipment line was also estimated. Radiation safety and environmental protection for waste treatment facility was calculated and the design on radiation safety and environmental protection for equipment line was proposed. Technological process and design document of this production line seemed to be reasonable because it is consistent with properties of wastes as well as it has been commonly used in the world to stabilize solid residues in nuclear industry. The advantages of this propose were simple structure of the devices, locally made, easy operation, locally available and inexpensive materials resulting in low cost of investment and operation. (author)

NATO ARI on Ergonomic Data for Equipment Design

CERN Document Server

1984-01-01

For many years ergonomists and human engineering specialists have made significant contributions to the solution of problems faced in the area of human labour and to the introduction of their research results and field experience into the process of equipment design. However, the rapid increase in complexity of equipment in use as well as in development demonstrates the necessity of broaden­ ing the point of view continuously. The workshop held in Munich from March 22nd to March 26th, 1982, was an excellent opportunity for the participants to discuss their respective interests and their interpretation of needs for future research. The workshop was sponsored by the Human Factors Special Programme Panel of the Scientific Affairs Division of NATO. This sponsorship, together with the helpful assistance rendered by Drs. Bayraktar, Kroemer, and Sanders, is gratefully acknowledged. This volume contains the papers presented during the workshop. All these papers are directly related to the general aim: the ex­ chang...

75 FR 71454 - NIJ Certification Programs Workshop

Science.gov (United States)

2010-11-23

... Workshop to introduce NIJ standards for law enforcement, corrections, and public safety equipment to....m. to 5 p.m. at the Hotel Monaco, 700 F Street, NW., Washington, DC 20004. The meeting room is the...

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop

International Nuclear Information System (INIS)

Nottingham, L.D.; Sabourin, P.F.

1992-10-01

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. A key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately

TBT: Telecommunications-Based Training in the 90s (DELTA Programme--Action Line III). Proceedings of the Workshop (Madrid, Spain, January 21-22, 1991).

Science.gov (United States)

Commission of the European Communities, Brussels (Belgium).

This report contains a collection of papers presented at a workshop on telecommunications-based training systems as part of the DELTA (Developing European Learning through Technological Advance) Action Line III, which addressed research in telecommunications for open and distance education. The following presentations are included: (1)…

Wireless Power Supply via Coupled Magnetic Resonance for on-line Monitoring Wireless Sensor of High-voltage Electrical Equipment

DEFF Research Database (Denmark)

Xingkui, Mao; Qisheng, Huang; Yudi, Xiao

2016-01-01

On-line monitoring of high-voltage electrical equipment (HV-EE) aiming to detect faults effectively has become crucial to avoid serious accidents. Moreover, highly reliable power supplies are the key component for the wireless sensors equipped in such on-line monitoring systems. Therefore......, in this paper, the wireless power supply via coupled magnetic resonance (MR-WPS) is proposed for powering the wireless sensor and the associated wireless sensor solution is also proposed. The key specifications of the MR-WPS working in switchgear cabinet with a harsh operation environment are analyzed...... power is able to be delivered to the wireless sensor through the designed MR-WPS, and therefore the theoretical analysis and design is verified....

Customer/User Workshops in Product development

DEFF Research Database (Denmark)

Brandt, Eva; Binder, Thomas

1997-01-01

In a recent product development project, we have taken part in establishing and organising a series of workshops with a group of customers/users of a future product line through out the development project. The workshops is a kind of informal meetingplace for engineering, marketing, customers...... and discuss experiences with this kind of collaborative fora. We have tried to demonstrate that having an on-going dialogue with users/customers also during detailed design in not only a means to keep 'the voive of the customer alive'. We have found that the workshops have an important impact on securing...

Spiral 2 workshop

International Nuclear Information System (INIS)

2004-01-01

The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop

Spiral 2 workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop.

Accelerators and storage rings. TS Workshop 2005. Book of Abstracts

International Nuclear Information System (INIS)

Ciriani, P.; Magnin, B.; Oliveira, R. de; Chevalley, J.; Artoos, K.; Bertone, C.; Minginette, P.; Corso, J.P.; Grillot, S.; Weisz, S.; Prodon, S.; Sakkinen, J.; Foraz, K.; Funken, A.; Bangert, N.; Hakulinen, T.; Boncompagni, Y.; Delamare, C.; Folch, R.; Poehler, M.; Bertarelli, A.; Martel, C.; Butin, F.; Osborne, J.; Evrard, S.; Lacarrere, D.; Gayde, J.C.; Renaglia, T.; Batz, M.; Tsesmelis, E.; Wijnands, T.; Perrot, A.L.; Gastal, M.; Atieh, S.; Cherif, A.; Costa Pinto, P.; Calatroni, S.; Ninin, P.; Battistin, M.; Arnau Izquierdo, G.; Favre, G.; Mathot, S.; Mainaud, H.; Podevin, C.; Jones, M.; Stowisek, J.; Roy, S.; Sanchez-Corral, E.; Petit, S.; Martel, P.; Colloca, C.; Van Der Bij, E.; Vadon, M.; Kahle, K.; Principe, R.; Macina, D.; Schmidt, R.; Ridewood, J.; Lopez-Hernandez, L.A.

2005-01-01

This document gathers the abstracts of the papers presented at the workshop. This workshop was dedicated to the status of the technical support of the LHC (large hadron collider) in CERN. The different issues concern: -) the installation of the equipment in the LHC tunnel (super-conducting magnets, cold boxes, PS magnets...), -) underground logistics, -) the installation of experimental areas, -) the new CERN control center, and -) special technologies. (A.C.)

Accelerators and storage rings. TS Workshop 2005. Book of Abstracts

Energy Technology Data Exchange (ETDEWEB)

Ciriani, P.; Magnin, B.; Oliveira, R. de; Chevalley, J.; Artoos, K.; Bertone, C.; Minginette, P.; Corso, J.P.; Grillot, S.; Weisz, S.; Prodon, S.; Sakkinen, J.; Foraz, K.; Funken, A.; Bangert, N.; Hakulinen, T.; Boncompagni, Y.; Delamare, C.; Folch, R.; Poehler, M.; Bertarelli, A.; Martel, C.; Butin, F.; Osborne, J.; Evrard, S.; Lacarrere, D.; Gayde, J.C.; Renaglia, T.; Batz, M.; Tsesmelis, E.; Wijnands, T.; Perrot, A.L.; Gastal, M.; Atieh, S.; Cherif, A.; Costa Pinto, P.; Calatroni, S.; Ninin, P.; Battistin, M.; Arnau Izquierdo, G.; Favre, G.; Mathot, S.; Mainaud, H.; Podevin, C.; Jones, M.; Stowisek, J.; Roy, S.; Sanchez-Corral, E.; Petit, S.; Martel, P.; Colloca, C.; Van Der Bij, E.; Vadon, M.; Kahle, K.; Principe, R.; Macina, D.; Schmidt, R.; Ridewood, J.; Lopez-Hernandez, L.A

2005-07-01

This document gathers the abstracts of the papers presented at the workshop. This workshop was dedicated to the status of the technical support of the LHC (large hadron collider) in CERN. The different issues concern: -) the installation of the equipment in the LHC tunnel (super-conducting magnets, cold boxes, PS magnets...), -) underground logistics, -) the installation of experimental areas, -) the new CERN control center, and -) special technologies. (A.C.)

Arc Flash Personal Protective Equipment (PPE) Requirements for High-Voltage Overhead Line Work at 69 KV (Nominal) or Less

National Research Council Canada - National Science Library

Hammond, Daryl

2006-01-01

... after work is complete, and in those rare occasions when the authority in Air Force Instruction (AFI) 32-1064, Electrical Safe Practices, authorizes work on energized electrical equipment or lines.

Workshop 'Reducing the share of drilling in the total cost of geothermal power generation'; Workshop 'Senkung des bohrtechnischen Anteils an den geothermischen Stromgestehungskosten'

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

For a further development of geothermal power generation, technological adaptations of drilling technology will be required that will reduce the specific power generation cost. This workshop discussed the options for adaptation and the resulting cost improvements. Both technical and non-technical issues were tackled. The full-text documents of the workshop (overheads) can be downloaded at http://www.ie-leipzig.de. Subjects were: (1) Downhole engine technology; (2) New drilling equipment in consideration of geothermal requirements; (3) New drilling equipment in consideration of geothermal requirements; (4) Innovative drilling concepts/ Current cost allotment; (5) Higher efficiency in drilling with flushing adapted to drilling horizons; (6) MWD/LWD technologies of the KW industry; (7) Completion technology in geothermal plants; (8) Time and cost planning in drilling plans; (9) Cost-optimized drilling from a drilling contractor's view; (10) Requirements and obstacles in the licensing of new drilling equipment. (orig.)

Remotely operated replaceable process equipment

International Nuclear Information System (INIS)

Westendorf, H.

1987-01-01

The coupling process of pneumatic and electrical auxiliary lines of a pneumatic control pressure line in a large cell of the reprocessing plant is carried out, together with the coupling process of the connecting flange of the process equipment. The coupling places of the auxiliary lines, such as control or supply lines, are laid in the flange parts of the flanges to be connected. The pipe flange on the frame side remains flush with the connecting flange of the process equipment. (DG) [de

Line facilities outline

International Nuclear Information System (INIS)

1998-08-01

This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

FASTBUS software workshop

International Nuclear Information System (INIS)

1985-01-01

FASTBUS is a standard for modular high-speed data acquisition, data-processing and control, development for use in high-energy physics experiments incorporating different types of computers and microprocessors. This Workshop brought together users from different laboratories for a review of current software activities, using the standard both in experiments and for test equipment. There are also papers on interfacing and the present state of systems being developed for use in future LEP experiments. Also included is a discussion on the proposed revision of FASTBUS Standard Routines. (orig.)

Inspector training for VIFM equipment - An integrated approach

International Nuclear Information System (INIS)

Truong, Q.S. Bob; Keeffe, R.; Ellacott, T.; Desson, K.; Herber, N.

2001-01-01

Full text: The VXI Integrated Fuel Monitor (VIFM) was developed by the Canadian Safeguards Support Program (CSSP) as a generic radiation monitor for safeguards applications. The VIFM equipment features a modular design, where a single cabinet can house several instruments such as bundle counters, core discharge monitors, Yes/No monitors, and other devices. VIFM can also be used in a stand-alone, transportable mode, with a detector connected to a single VIFM module linked to a laptop computer. VIFM equipment is currently in use at CANDU nuclear generating stations in several countries. Because each facility may have a different combination of detectors, the training program has been designed to reflect the modular nature of VIFM. Introductory material is generic and applies to any facility. More advanced material is carefully compartmentalized to allow IAEA Inspectors to concentrate their efforts in areas that concern them. Advanced material is available in a just-in-time reference format that simplifies rapid access to detailed information. A number of training resources have been developed, including multimedia and video material on CD-ROMs. This material has been designed to operate on a laptop computer, allowing inspectors to review and refresh their knowledge at any time - for example, during inspection trips. Although each of these resources is useful in its own right, the CSSP is developing an integrated approach to inspector training that combines all of these elements in a new way calculated to produce better training results than in the past. This new training approach features a two-day workshop preceded by a period of CD-ROM-based self-paced study. After the workshop, participants are able to make use of printed and CD-ROM-based reference materials for just-in-time 'refreshers'. Each step in this integrated approach to training will be described in the presentation. Briefly, the steps are as follows. A multimedia computer-based training package is made

Nineteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1994-01-20

operate audiovisual equipment and to Xianfa Deng who coordinated the meeting arrangements for the Workshop. Roland N. Home Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

Transactions of the criticality alarm systems workshop

International Nuclear Information System (INIS)

1988-01-01

The first Criticality Alarm workshop was held by the US Department of Energy Albuquerque Operations Office in 1985. This second workshop is the first held on an international level. There were 98 persons in attendance. They represented the Department of Energy (DOE) field offices, DOE contractors, the Nuclear Regulatory Commission (NRC), NRC licensees, and agencies in the United Kingdom, France, West Germany, and Japan. Topics were on practices experience, and development. A key value of the workshop was the sharing of critical alarm system experiences, problems, and advances in the state of the art. In addition, several Criticality Alarm Systems (CAS) equipment systems were exhibited. Papers were presented on: nature of criticality accidents; lessons learned from past accidents; application of ANS 8.3 standard; gamma and neutron detection systems; research and development in progress; testing at Oak Ridge and Los Alamos; methods used to place detectors; centralized readout feature; false alarms; trip-point settings; and testing and maintenance. The individual papers have been cataloged separately

Simulation research on the process of large scale ship plane segmentation intelligent workshop

Science.gov (United States)

Xu, Peng; Liao, Liangchuang; Zhou, Chao; Xue, Rui; Fu, Wei

2017-04-01

Large scale ship plane segmentation intelligent workshop is a new thing, and there is no research work in related fields at home and abroad. The mode of production should be transformed by the existing industry 2.0 or part of industry 3.0, also transformed from "human brain analysis and judgment + machine manufacturing" to "machine analysis and judgment + machine manufacturing". In this transforming process, there are a great deal of tasks need to be determined on the aspects of management and technology, such as workshop structure evolution, development of intelligent equipment and changes in business model. Along with them is the reformation of the whole workshop. Process simulation in this project would verify general layout and process flow of large scale ship plane section intelligent workshop, also would analyze intelligent workshop working efficiency, which is significant to the next step of the transformation of plane segmentation intelligent workshop.

International Workshop on Best Practices in Material Hold-Up Monitoring

International Nuclear Information System (INIS)

Pickett, Chris A; Coates, Cameron W.

2008-01-01

In the fall of 2006, the Oak Ridge National Laboratory (ORNL) hosted an INMM-sponsored International Workshop on Best Practices in Material Hold-Up Monitoring. This workshop represented the first time in over 20 years that the international community had gathered to discuss pertinent hold-up topics and needs. More than one hundred people attended the workshop. Their expertise in the field ranged from novice to expert, and they shared their experiences and expertise throughout the week of the workshop. Presenters discussed techniques that have been used worldwide to detect and characterize nuclear materials held up in processes and equipment and the policies used to report quantities detected. The primary goal of the workshop was to compile information on the best practices and lessons learned and to make this information available for sharing throughout the international community. This paper discusses the information that was produced from four separate working groups (each composed of workshop attendees). Each group was tasked to determine what it felt to be the best practices in the field today and what issues needed to be addressed to move the field forward in the 21st century

Workshop on CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Isgur, N.; Stoler, P. [eds.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF`s current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF`s program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop`s conclusions. Its body consists of sections corresponding to the workshop`s Working Groups on Hadron Spectroscopy and Production, High Q{sup 2} Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF`s current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Eleventh workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

1986-01-23

The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

Scientific Equipment Division - Overview

International Nuclear Information System (INIS)

Halik, J.

2001-01-01

Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: - designing of devices and equipment for experiments in physics, their mechanical construction and assembly. In particular, there are vacuum chambers and installations for HV and UHV; - maintenance and upgrading of the existing installations and equipment in our Institute; - participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and a AO plotter, what allows us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. It offers the following possibilities: - turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc-type elements of a diameter up to 600 mm and a length not exceeding 300 mm; - milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm; - grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm; - drilling - holes of a diameter up to 50 mm; - welding - electrical and gas welding, including TIG vacuum-tight welding; - soft and hard soldering; - mechanical works including precision engineering; - plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides; - painting - paint spraying with possibility of using furnace-fred drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop posses CNC milling machine which can be used for machining of work-pieces up to 500 kg

Second International Workshop on Magnetic Particle Imaging

CERN Document Server

Borgert, Jörn; Magnetic Particle Imaging : A Novel SPIO Nanoparticle Imaging Technique

2012-01-01

Magnetic Particle Imaging (MPI) is a novel imaging modality. In MPI superparamagnetic iron oxide nanoparticles are used as tracer materials. The volume is the proceeding of the 2nd international workshop on magnetic particle imaging (IWMPI). The workshop aims at covering the status and recent developments of both, the instrumentation and the tracer material, as each of them is equally important in designing a well performing MPI. For instance, the current state of the art in magnetic coil design for MPI is discussed. With a new symmetrical arrangement of coils, a field-free line (FFL) can be produced that promises a significantly higher sensitivity compared with the standard arrangement for a FFP. Furthermore, the workshop aims at presenting results from phantom and pre-clinical studies.

Proceedings: 20th Steam Generator NDE Workshop: Orlando, Florida, July 9-11, 2001

International Nuclear Information System (INIS)

2003-01-01

The 2001 workshop took place in Orlando, Florida, from July 9 to 11, 2001. It covered one full day and two half-days of presentations. Attendees included representatives from domestic and overseas nuclear utilities, NSSS vendors, NDE service and equipment organizations, research laboratories, and regulatory bodies. This annual workshop serves as a forum for NDE specialists to gather and discuss current steam generator NDE issues and means for their resolution

Tenth Workshop on Crystalline Silicon Solar Cell Materials and Processes: A Summary of Discussion Sessions

Energy Technology Data Exchange (ETDEWEB)

Tan, T.; Swanson, D.; Sinton, R.; Sopori, B.

2001-01-22

The 10th Workshop on Silicon Solar Cell Materials and Processes was held in Copper Mountain, Colorado, on August 13-16, 2000. The workshop was attended by 85 scientists and engineers from 15 international photovoltaic (PV) companies and 24 research institutions. Review and poster presentations were augmented by discussion sessions to address the recent progress and critical issues in meeting the goals for Si in the PV Industry Roadmap. The theme of the workshop was Si Photovoltaics: 10 Years of Progress and Opportunities for the Future. Two special sessions were held: Advanced Metallization and Interconnections - covering recent advances in solar cell metallization, printed contacts and interconnections, and addressing new metallization schemes for low-cost cell interconnections; and Characterization Methods - addressing the growing need for process monitoring techniques in the PV industry. The following major issues emerged from the discussion sessions: (1) Mechanical breakage in the P V industry involves a large fraction, about 5%-10%, of the wafers. (2) The current use of Al screen-printed back-contacts appears to be incompatible with the PV Industry Roadmap requirements. (3) The PV manufacturers who use hydrogen passivation should incorporate the plasma-enhanced chemical vapor deposited (PECVD) nitride for antireflection coating and hydrogenation. (4) There is an imminent need to dissolve metallic precipitates to minimize the electrical shunt problem caused by the ''bad'' regions in wafers. (5) Industry needs equipment for automated, in-line monitoring and testing. There are simply not many tools available to industry. (6) In the Wrap-Up Session of the workshop, there was consensus to create four industry/university teams that would address critical research topics in crystalline silicon. (7) The workshop attendees unanimously agreed that the workshop has served well the PV community by promoting the fundamental understanding of industrial

Truck circuits diagnosis for railway lines equipped with an automatic block signalling system

Science.gov (United States)

Spunei, E.; Piroi, I.; Muscai, C.; Răduca, E.; Piroi, F.

2018-01-01

This work presents a diagnosis method for detecting track circuits failures on a railway traffic line equipped with an Automatic Block Signalling installation. The diagnosis method uses the installation’s electrical schemas, based on which a series of diagnosis charts have been created. Further, the diagnosis charts were used to develop a software package, CDCBla, which substantially contributes to reducing the diagnosis time and human error during failure remedies. The proposed method can also be used as a training package for the maintenance staff. Since the diagnosis method here does not need signal or measurement inputs, using it does not necessitate additional IT knowledge and can be deployed on a mobile computing device (tablet, smart phone).

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

International Nuclear Information System (INIS)

Dey, M.

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission's Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Dey, M. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Safety Issue Resolution; Arsenault, F.; Patterson, M.; Gaal, M. [SCIENTECH, Inc., Rockville, MD (United States)

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission`s Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements.

PREFACE: The International Workshop on Positron Studies of Defects 2014

Science.gov (United States)

Sugita, Kazuki; Shirai, Yasuharu

2016-01-01

The International Workshop on Positron Studies of Defects 2014 (PSD-14) was held in Kyoto, Japan from 14-19 September, 2014. The PSD Workshop brought together positron scientists interested in studying defects to an international platform for presenting and discussing recent results and achievements, including new experimental and theoretical methods in the field. The workshop topics can be characterized as follows: • Positron studies of defects in semiconductors and oxides • Positron studies of defects in metals • New experimental methods and equipment • Theoretical calculations and simulations of momentum distributions, positron lifetimes and other characteristics for defects • Positron studies of defects in combination with complementary methods • Positron beam studies of defects at surfaces, interfaces, in sub-surface regions and thin films • Nanostructures and amorphous materials

A Weekend Workshop on Double Stars for Students

Science.gov (United States)

Brewer, Mark; Estrada, Chris; Estrada, Reed; Gillette, Sean

2016-01-01

A weekend double star workshop was held by Vanguard Preparatory for selected eighth grade students with the purpose of introducing them to astrometric observational science. The students were selected based on an essay provided by their language arts class. Collaboration with local visiting astronomers was established to provide telescopes equipped with an astrometric eyepiece, observational supervision, and expertise. During the workshop students learned how to determine the scale constant of an astrometric eyepiece, and the procedure for measuring separations and position angles of double stars. The students compared their data to past measurements reported in the Washington Double Star Catalog. Three goals were set for the student's outcome: 1) observe, record, and report observations of double stars, 2) write a scientific paper for publication in the Journal of Double Star Observations, and 3) present a PowerPoint presentation to their peers. This paper chronicles the planning, preparation, funding, and execution required to complete a double star workshop at a public middle school.

Solvent exposure and related work practices amongst apprentice spray painters in automotive body repair workshops.

Science.gov (United States)

Winder, C; Turner, P J

1992-08-01

As part of a multidisciplinary study into the health effects of solvents, workplace assessments and airborne solvent vapour monitoring was conducted in 46 spray painting workshops in the Sydney metropolitan area. Breathing-zone samples were taken from 50 apprentices and 14 experienced spray painters. An interview schedule was developed to obtain information about the use of acrylic or two-pack paint systems, the use of engineering controls, the use of personal protective equipment and the availability of material safety data sheets. Contaminants typical of the chemical products used in this industry were encountered (aromatic hydrocarbons, C5-C7 aliphatic hydrocarbons, ketones, esters). The results of airborne solvent monitoring indicate a total solvent exposure in the range 1-99% of a combined Worksafe Australia exposure standard, with a mean of 19%. Solvent exposure was highest when spraying acrylic paint in the open workshop and lowest when spraying two pack paint in a spray booth. Much the same personal protective equipment was available in all workshops, but wide variation in its use was observed. Material safety data sheets were not observed in any of the workshops.

Farm Equipment Manufacturing and Maintenance Services by Blacksmiths in Mali

Directory of Open Access Journals (Sweden)

O. Djiré

2004-03-01

Full Text Available The Office of Niger has largely contributed to the spread of animal traction technology. Draft animals being largely available, the major constraint has been the high price of imported equipment relative to the purchasing power of the farmers. From the 1980s, considerable quantities of animal traction implements have been introduced particularly by the Arpon project. These implements were assembled at a central workshop and distributed to farmers through a medium term credit facility, including purchase of oxen. Meanwhile support was given to the upgrading of the first blacksmiths’ workshops, providing them with basic equipment, on credit. In the Southern Mali cotton production zone as well as in the Segou River plains rice producing area, associations of blacksmiths have also been created. These networks have greatly contributed to the improvement of skills and turn over of their members. Blacksmiths have become the main producers of animal traction equipment in Mali. Also, farmers greatly appreciate after-sales services. Nevertheless, the sector is still handicapped by major constraints, which are the high price of imported steel, the poor distribution network for electricity and its high cost, as well as the actual absence of credit facilities for blacksmiths. Therefore, in 1997, the blacksmiths’ association of the Office of Niger zone, together with those of the two other zones have created the CMDT/ON/ORS Blacksmiths’ Federation. Its main purposes are the provision and distribution of raw materials (steel products, facilitation of workshop upgrading, organization of training and exchange sessions, and promotion of product marketing.

Heat pipe applications workshop report

International Nuclear Information System (INIS)

Ranken, W.A.

1978-04-01

The proceedings of the Heat Pipe Applications Workshop, held at the Los Alamos Scientific Laboratory October 20-21, 1977, are reported. This workshop, which brought together representatives of the Department of Energy and of a dozen industrial organizations actively engaged in the development and marketing of heat pipe equipment, was convened for the purpose of defining ways of accelerating the development and application of heat pipe technology. Recommendations from the three study groups formed by the participants are presented. These deal with such subjects as: (1) the problem encountered in obtaining support for the development of broadly applicable technologies, (2) the need for applications studies, (3) the establishment of a heat pipe technology center of excellence, (4) the role the Department of Energy might take with regard to heat pipe development and application, and (5) coordination of heat pipe industry efforts to raise the general level of understanding and acceptance of heat pipe solutions to heat control and transfer problems

Ninth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

1983-12-15

(Reservoir Chemistry), Malcolm Mossman (Reservoir Chemistry), Greg Raasch (Production), Manny Nathenson (Injection), Susan Petty (Injection), Subir Sanyal (Simulation), Marty Molloy (Petrothermal), and Allen Moench (Reservoir Physics). The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Jean Cook, Joanne Hartford, Terri Ramey, Amy Osugi, and Marilyn King for their valued help with the Workshop arrangements and the Proceedings. We also owe thanks to the program students who arranged and operated the audio-visual equipment. The Ninth Workshop was supported by the Geothermal and Hydropower Technologies Division of the U . S . Department of Energy through contract DE-AT03-80SF11459. We deeply appreciate this continued support. H. J. Ramey, Jr., R. N. Horne, P. Kruger, W. E. Brigham, F. G. Miller, J. S . Gudmundsson -vii

Proceedings: Power Plant Electric Auxiliary Systems Workshop

International Nuclear Information System (INIS)

1992-06-01

The EPRI Power Plant Electric Auxiliary Systems Workshop, held April 24--25, 1991, in Princeton, New Jersey, brought together utilities, architect/engineers, and equipment suppliers to discuss common problems with power plant auxiliary systems. Workshop participants presented papers on monitoring, identifying, and solving problems with auxiliary systems. Panel discussions focused on improving systems and existing and future plants. The solutions presented to common auxiliary system problems focused on practical ideas that can enhance plant availability, reduce maintenance costs, and simplify the engineering process. The 13 papers in these proceedings include: Tutorials on auxiliary electrical systems and motors; descriptions of evaluations, software development, and new technologies used recently by electric utilities; an analysis of historical performance losses caused by power plant auxiliary systems; innovative design concepts for improving auxiliary system performance in future power plants

Proceedings of the 1997 oil heat technology conference and workshop

Energy Technology Data Exchange (ETDEWEB)

McDonald, R.J.

1997-09-01

This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the 4th International Workshop on Tritium Effects in Plasma Facing Components

International Nuclear Information System (INIS)

Causey, R. A.

1999-01-01

The 4th International Workshop on Tritium Effects in Plasma Facing Components was held in Santa Fe, New Mexico on May 14-15, 1998. This workshop occurs every two years, and has previously been held in Livermore/California, Nagoya/Japan, and the JRC-Ispra Site in Italy. The purpose of the workshop is to gather researchers involved in the topic of tritium migration, retention, and recycling in materials used to line magnetic fusion reactor walls and provide a forum for presentation and discussions in this area. This document provides an overall summary of the workshop, the workshop agenda, a summary of the presentations, and a list of attendees

International workshop on chromosome 3. Final report, April 15, 1991--April 14, 1992

Energy Technology Data Exchange (ETDEWEB)

Gemmill, R.M.

1992-07-01

The Second Workshop on Human Chromosome 3 was held on April 4--5, 1991 at Denver, Colorado. There were 43 participants representing 8 nations. The workshop participants reviewed the current state of the chromosome 3 map, both physical and genetic, and prepared lists of markers and cell lines to be made commonly available. These markers and cell lines should be incorporated into the mapping efforts of diverse groups to permit the integration of data and development of consensus maps at future workshops. Region specific efforts were described for sections of the chromosome harboring genes thought to be involved in certain diseases including Von Hippel-Lindau disease, 3p-syndrome, lung cancer and renal cancer. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Thirteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

1988-01-21

, Yasmin Gulamani, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, especially Jeralyn Luetkehans. The Thirteenth Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract No. DE-AS07-84ID12529. We deeply appreciate this continued support. Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jean W. Cook

Lifetime of Mechanical Equipment

Energy Technology Data Exchange (ETDEWEB)

Leland, K.

1999-07-01

The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

Remotely operated replaceable process equipment. Fernbedient austauschbare Prozessapparatur

Energy Technology Data Exchange (ETDEWEB)

Westendorf, H.

1987-07-23

The coupling process of pneumatic and electrical auxiliary lines of a pneumatic control pressure line in a large cell of the reprocessing plant is carried out, together with the coupling process of the connecting flange of the process equipment. The coupling places of the auxiliary lines, such as control or supply lines, are laid in the flange parts of the flanges to be connected. The pipe flange on the frame side remains flush with the connecting flange of the process equipment.

Days individual equipment of protection and professional risks; Equipements de protection individuelle et risques professionnelles

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The personal protection equipment is studied in the legal way (legal liabilities, certification, European texts), technical way (ergonomics, painfulness of ventilated equipment wearing, reliability of a respirable air line, protection gloves against the chemical risk, exposure to nano particulates, working in hot area), human factors (hostile area and emotion management), studies on personal equipment such evaluation, efficiency, conception of new equipment, physiological tolerance, limit of use, and some general safety studies on the working places. (N.C.)

Weight/balance portable test equipment

International Nuclear Information System (INIS)

Whitlock, R.W.

1994-01-01

This document shows the general layout, and gives a part description for the weight/balance test equipment. This equipment will aid in the regulation of the leachate loading of tanker trucks. The report contains four drawings with part specifications. The leachate originates from lined trenches

Expanding to teleoperation of a tight modular workshop for dismantling radioactive components

International Nuclear Information System (INIS)

Gasc, B.

1990-01-01

The CEA (French Nuclear Energy Commission) in connection with TECHNICATOME developed a tight modular workshop for the dismantling of AT1 plant facilities in LA HAGUE. This workshop constructed of reusable stainless steel panels assembled by bolting provides a tight and decontaminable working zone compatible with any building configuration. This being the case, the operators bearing ventilated suits may work under the best safety conditions on alpha-contaminated materials. For the purpose of expanding the working capacities of this workshop it was decided to develop special components for teleoperation from the outside as in a conventional cell. To meet this objective which is within the scope of the contract signed with the CEC, the following components were developed and constructed: - manipulator holder panel, - swivelling hatch panel, - wall equipment sealed transfer device and, - modular biological protection. The design, construction and tests of these new components led to their qualification and further incorporation in the list of components of the modular workshop liable to be used for teleoperation procedures

7th International Workshop on Advanced Optical Imaging and Metrology

CERN Document Server

2014-01-01

In continuation of the FRINGE Workshop Series this Proceeding contains all contributions presented at the 7. International Workshop on Advanced Optical Imaging and Metrology. The FRINGE Workshop Series is dedicated to the presentation, discussion and dissemination of recent results in Optical Imaging and Metrology. Topics of particular interest for the 7. Workshop are: - New methods and tools for the generation, acquisition, processing, and evaluation of data in Optical Imaging and Metrology (digital wavefront engineering, computational imaging, model-based reconstruction, compressed sensing, inverse problems solution) - Application-driven technologies in Optical Imaging and Metrology (high-resolution, adaptive, active, robust, reliable, flexible, in-line, real-time) - High-dynamic range solutions in Optical Imaging and Metrology (from macro to nano) - Hybrid technologies in Optical Imaging and Metrology (hybrid optics, sensor and data fusion, model-based solutions, multimodality) - New optical sensors, imagi...

Twelfth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

1987-01-22

arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, specially Jim Lovekin. The Twelfth Workshop was supported by the Geothermal Technology Division of the U. S. Department of Energy through Contract Nos. DE-AS03-80SF11459 and DE-AS07- 84ID12529. We deeply appreciate this continued support. January 1987 Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jesus Rivera

Twentieth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1995-01-26

PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

A facility for using cluster research to study environmental problems. Workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

1991-11-01

This report begins by describing the general application of cluster based research to environmental chemistry and the development of a Cluster Structure and Dynamics Research Facility (CSDRF). Next, four important areas of cluster research are described in more detail, including how they can impact environmental problems. These are: surface-supported clusters, water and contaminant interactions, time-resolved dynamic studies in clusters, and cluster structures and reactions. These facilities and equipment required for each area of research are then presented. The appendices contain workshop agenda and a listing of the researchers who participated in the workshop discussions that led to this report.

47 CFR 36.126 - Circuit equipment-Category 4.

Science.gov (United States)

2010-10-01

... separating property associated with special services, circuit equipment included in Categories 4.12 (other... Equipment Excluding Wideband—Category 4.13—The cost of Circuit Equipment associated with exchange line plant... 47 Telecommunication 2 2010-10-01 2010-10-01 false Circuit equipment-Category 4. 36.126 Section 36...

MO-AB-210-03: Workshop

International Nuclear Information System (INIS)

Lu, Z.

2015-01-01

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

Workshop on environmental qualification of electric equipment

International Nuclear Information System (INIS)

Lofaro, R.; Gunther, W.; Villaran, M.; Lee, B.S.; Taylor, J.

1994-05-01

Questions concerning the Environmental Qualification (EQ) of electrical equipment used in commercial nuclear power plants have recently become the subject of significant interest to the US Nuclear Regulatory Commission (NRC). Initial questions centered on whether compliance with the EQ requirements for older plants were adequate to support plant operation beyond 40 years. After subsequent investigation, the NRC Staff concluded that questions related to the differences in EQ requirements between older and newer plants constitute a potential generic issue which should be evaluated for backfit, independent of license renewal activities. EQ testing of electric cables was performed by Sandia National Laboratories (SNL) under contract to the NRC in support of license renewal activities. Results showed that some of the environmentally qualified cables either failed or exhibited marginal insulation resistance after a simulated plant life of 20 years during accident simulation. This indicated that the EQ process for some electric cables may be non-conservative. These results raised questions regarding the EQ process including the bases for conclusions about the qualified life of components based upon artificial aging prior to testing

Workshop on environmental qualification of electric equipment

Energy Technology Data Exchange (ETDEWEB)

Lofaro, R.; Gunther, W.; Villaran, M.; Lee, B.S.; Taylor, J. [comps.] [Brookhaven National Lab., Upton, NY (United States)

1994-05-01

Questions concerning the Environmental Qualification (EQ) of electrical equipment used in commercial nuclear power plants have recently become the subject of significant interest to the US Nuclear Regulatory Commission (NRC). Initial questions centered on whether compliance with the EQ requirements for older plants were adequate to support plant operation beyond 40 years. After subsequent investigation, the NRC Staff concluded that questions related to the differences in EQ requirements between older and newer plants constitute a potential generic issue which should be evaluated for backfit, independent of license renewal activities. EQ testing of electric cables was performed by Sandia National Laboratories (SNL) under contract to the NRC in support of license renewal activities. Results showed that some of the environmentally qualified cables either failed or exhibited marginal insulation resistance after a simulated plant life of 20 years during accident simulation. This indicated that the EQ process for some electric cables may be non-conservative. These results raised questions regarding the EQ process including the bases for conclusions about the qualified life of components based upon artificial aging prior to testing.

Biomass energy conversion workshop for industrial executives

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The rising costs of energy and the risks of uncertain energy supplies are increasingly familiar problems in industry. Bottom line profits and even the simple ability to operate can be affected by spiralling energy costs. An often overlooked alternative is the potential to turn industrial waste or residue into an energy source. On April 9 and 10, 1979, in Claremont, California, the Solar Energy Research Institute (SERI), the California Energy Commission (CEC), and the Western Solar Utilization Network (WSUN) held a workshop which provided industrial managers with current information on using residues and wastes as industrial energy sources. Successful industrial experiences were described by managers from the food processing and forest product industries, and direct combustion and low-Btu gasification equipment was described in detail. These speakers' presentations are contained in this document. Some major conclusions of the conference were: numerous current industrial applications of wastes and residues as fuels are economic and reliable; off-the-shelf technologies exist for converting biomass wastes and residues to energy; a variety of financial (tax credits) and institutional (PUC rate structures) incentives can help make these waste-to-energy projects more attractive to industry. However, many of these incentives are still being developed and their precise impact must be evaluated on a case-by-case basis.

Outcomes of a Cross-Disciplinary Concussion Prevention and Diagnosis Workshop Series

Directory of Open Access Journals (Sweden)

Patrick Drane

2018-02-01

Full Text Available This paper reports the outcomes of a series of two Concussion Research Workshops held in Lowell, MA, USA. The workshop examined the state-of-the-art in concussion research, research challenges and the future directions of research within the following three core topic areas: (A Concussion Prevention Techniques & Technology, (B Concussion Diagnosis, and (C Treatment of Concussions. Concussions are a form of traumatic brain injury caused by an impact and are a growing concern among athletes and those who are involved with sports. Recent years have led to increasing awareness and research related to concussions with limited definitive understanding of the specific mechanism and pathology. Technology is beginning to take on an important role in the prevention, diagnosis and treatment of concussions. Currently, sensors provide data about the impact and the athlete. However, sensors and better protective equipment can enable an effective monitoring and thus protection of athletes. Only when a more definitive understanding of the injury mechanism is achieved, can sensors and protective equipment design contribute to effective monitoring and protection of athletes.

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Proceedings of the workshop on data acquisition system for high energy physics

International Nuclear Information System (INIS)

Hayano, R.S.

1984-09-01

The workshop ''Data acquisition system for high energy experiment'' was held by the on-line electronics group of KEK in cooperation with the data processing section on May 28-29, 1984, at KEK. This year, the proton synchrotron is prepared for the work after shutdown, and in the TRISTAN, the full scale construction of the data acquisition system is advanced. One of the large topics was the TKO box proposed by the data acquisition development group of KEK, and its specification is included in this book. This workshop was the meeting with very wide range from front end electronics to large computers. The talks on flash analog/digital converters and latest data communication were held. As a new trial, the wish lists on the future development and support of on-line electronics and others were collected from the participants, and these were deliberated by all the members. The contents of the discussion at this time are given in this book. The summaries of the lectures presented at the meeting are collected in this book. The interchange with the experimental group is indispensable for the activities of the on-line electronics group, accordingly, the workshop like this will be held hereafter. (Kako, I.)

Workshop on CEBAF at higher energies

International Nuclear Information System (INIS)

Isgur, N.; Stoler, P.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF's current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF's program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop's conclusions. Its body consists of sections corresponding to the workshop's Working Groups on Hadron Spectroscopy and Production, High Q 2 Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF's current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database

Seventeenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1992-01-31

PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

Workshops som forskningsmetode

OpenAIRE

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

Workshop on industrial isotope radiography: Programme and lectures

International Nuclear Information System (INIS)

1979-01-01

The booklet contains the texts of lectures delivered in the Workshop on Industrial Radiography held at Bombay during 24-25 July 1979. The lectures cover some topics of relevance to industrial radiography. The topics are radiation protection and legislative aspects in industrial radiography; problems in field radiography in fertilizer industry, petrochemical industry and heavy engineering industry; occupational exposures in industrial radiography; and a review of the progress and recent trends in industrial radiographic techniques and equipment. (M.G.B.)

New ways of networking: A hands on workshop exploring the workspace:lab and its equipment

DEFF Research Database (Denmark)

Lundsgaard, Christina; Souza da Conceição, Carolina; Eriksson, Johanna

2013-01-01

Are you interested in designing new ways of networking at the Nordes conference with fellow researchers? Do you want to explore and discuss the so called “workspacelab” as a platform for user involvement? This workshop invites participants to explore a particular version of the design:lab called ...

A workshop report on promoting HIV/AIDS understanding through a ...

African Journals Online (AJOL)

A workshop report on promoting HIV/AIDS understanding through a capacity building train-the-trainer educational intervention. ... Optimal implementation of knowledge transfer incorporates choosing models that promote local initiatives in line with increasingly decentralized educational structures. These decentralized ...

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods.

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

International Nuclear Information System (INIS)

1995-01-01

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods

Applying TPM on Production Line of Huanwei

Directory of Open Access Journals (Sweden)

Zhai Yunkai

2017-01-01

The study based on the study and analysis of the TPM theory, based on my practice in the SMT2 production line of Victoria Electronics of Huanwei. Then it studied the promotion and implementation steps of TPM on SMT2 line. And it also introduced the improvement instance of SMT2 line. By contrasting the utilization of equipment on SMT2 line before and after the comprehensive of TPM, the necessity of implementing TPM is derived. For how to apply TPM on the production lines, and how to improve equipment comprehensive utilization, finish the order on time, provide high quality products to our customers, these are the main part of production line equipment management work. This article provides the reference for how to promote TPM on other production lines.

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

Non-invasive system for monitoring of the manufacturing equipment

Science.gov (United States)

Mazăre, A. G.; Belu, N.; Ionescu, L. M.; Rachieru, N.; Misztal, A.

2017-08-01

The automotive industry is one of the most important industries in the world that concerns the economy and the world culture. High demand has resulted in increasing of the pressure on the production lines. In conclusion, it is required more careful in monitoring of the production equipment not only for maintenance but also for staff safety and to increase the quality of production. In this paper, we propose a solution for non-invasive monitoring of the industrial equipment operation by measuring the current consumption on energy supply lines. Thus, it is determined the utilization schedule of the equipment and operation mode. Based on these measurements, it’s built an activity report for that equipment, available to the quality management and maintenance team. The solution consists of the current measuring equipment, with self-harvesting capabilities and radio transceiver, and an embedded system which run a server. The current measuring equipment will transmit data about consumption of each energy supply network line where is placed the industrial equipment. So, we have an internal measuring radio network. The embedded system will collect data for the equipment and put in a local data base and it will provide via an intranet application. The entire system not requires any supplementary energy supply and interventions in the factory infrastructure. It is experimented in a company from the automotive industries.

Assessment of Knowledge of Participants on Basic Molecular Biology Techniques after 5-Day Intensive Molecular Biology Training Workshops in Nigeria

Science.gov (United States)

Yisau, J. I.; Adagbada, A. O.; Bamidele, T.; Fowora, M.; Brai, B. I. C.; Adebesin, O.; Bamidele, M.; Fesobi, T.; Nwaokorie, F. O.; Ajayi, A.; Smith, S. I.

2017-01-01

The deployment of molecular biology techniques for diagnosis and research in Nigeria is faced with a number of challenges, including the cost of equipment and reagents coupled with the dearth of personnel skilled in the procedures and handling of equipment. Short molecular biology training workshops were conducted at the Nigerian Institute of…

SPEAR3 Workshop: Making the Scientific Case: Report from Workshop held at Stanford Synchrotron Radiation Laboratory, May 29-30, 1997

Energy Technology Data Exchange (ETDEWEB)

Brennan, S.

1998-08-13

As part of the planning process for the proposed upgrade to the SPEAR electron storage ring, SSRL, the SSRL Users Organization and the SSRL faculty sponsored a 1 1/2 day workshop on May 29-30 1997. The goal was to assess and document the impact of SPEAR3 on current and future science and technology research programs of the users of SSRL. The hard and soft x-ray beams produced at SSRL are used in a number of different scientific and technological disciplines. The workshop was organized by defining a set of areas of science and technology covering the basic activities at SSRL and inviting key people from outside Stanford to work with the SSRL faculty and staff in a set of topical groups on estimating the impact of SPEAR3 on their respective fields and developing a vision of the future opportunities. This report documents those scientific and technological opportunities and provides written summaries of the discussions. The report is organized with a brief technical description of SPEAR3 and planned beam line upgrades (which summarizes material presented to the workshop participants prior to the breakout sessions) following this executive summary. More detailed information from the topical working groups then follows. Finally, an appendix provides a list of workshop participants and a copy of the workshop agenda as well as some more detailed information on the SPEAR3 lattice and machine.

Report of the Synchrotron Radiation Vacuum Workshop

International Nuclear Information System (INIS)

Avery, R.T.

1984-06-01

The Synchrotron Radiation Vacuum Workshop was held to consider two vacuum-related problems that bear on the design of storage rings and beam lines for synchrotron radiation facilities. These problems are gas desorption from the vacuum chamber walls and carbon deposition on optical components. Participants surveyed existing knowledge on these topics and recommended studies that should be performed as soon as possible to provide more definitive experimental data on these topics. This data will permit optimization of the final design of the Advanced Light Source (ALS) and its associated beam lines. It also should prove useful for other synchrotron radiation facilities as well

Assessment of knowledge of participants on basic molecular biology techniques after 5-day intensive molecular biology training workshops in Nigeria.

Science.gov (United States)

Yisau, J I; Adagbada, A O; Bamidele, T; Fowora, M; Brai, B I C; Adebesin, O; Bamidele, M; Fesobi, T; Nwaokorie, F O; Ajayi, A; Smith, S I

2017-07-08

The deployment of molecular biology techniques for diagnosis and research in Nigeria is faced with a number of challenges, including the cost of equipment and reagents coupled with the dearth of personnel skilled in the procedures and handling of equipment. Short molecular biology training workshops were conducted at the Nigerian Institute of Medical Research (NIMR), to improve the knowledge and skills of laboratory personnel and academics in health, research, and educational facilities. Five-day molecular biology workshops were conducted annually between 2011 and 2014, with participants drawn from health, research facilities, and the academia. The courses consisted of theoretical and practical sessions. The impact of the workshops on knowledge and skill acquisition was evaluated by pre- and post-tests which consisted of 25 multiple choice and other questions. Sixty-five participants took part in the workshops. The mean knowledge of molecular biology as evaluated by the pre- and post-test assessments were 8.4 (95% CI 7.6-9.1) and 13.0 (95 CI 11.9-14.1), respectively. The mean post-test score was significantly greater than the mean pre-test score (p biology workshop significantly increased the knowledge and skills of participants in molecular biology techniques. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(4):313-317, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

Development of superconducting equipment for fusion device

International Nuclear Information System (INIS)

Konno, Masayuki; Ueda, Toshio; Hiue, Hisaaki; Ohgushi, Kouzou

1993-01-01

At Fuji Electric Co., Ltd., the development of superconductivity was started from 1960, and superconducting equipment for fusion device has been developed for ten years. The superconducting equipment, which is developed for fusion by Fuji Electric Co., Ltd., are able to be grouped in three categories which are current lead, superconducting coil and superconducting bus-line. The current lead is an electrical feeder between a superconducting coil and an electrical power supply. The rated current of developed current lead is 30kA at continuous use and 100kA at short time use respectively. The advanced disk type coil is developed for the toroidal field coil and some coils are developed for critical current measurement. Superconductor is applied to the superconducting bus-line between the superconducting coils and the current leads, and the bus-line is being developed for the Large Helical Device. This report describes an abstract of these equipment. (author)

Refrigeration and air-conditioning technology workshop

Energy Technology Data Exchange (ETDEWEB)

Lewis, P. J.; Counce, D. M. [eds.

1993-01-01

The Alternative Fluorocarbon Environmental Acceptability Study (AFEAS), a consortium of fluorocarbon manufacturers, and the US Department of Energy (DOE) are collaborating on a project to evaluate the energy use and global warming impacts of CFC alternatives. The goal of this project is to identify technologies that could replace the use of CFCs in refrigeration, heating, and air-conditioning equipment; to evaluate the direct impacts of chemical emissions on global warming; and to compile accurate estimates of energy use and, indirect CO{sub 2} emissions of substitute technologies. The first phase of this work focused on alternatives that could be commercialized before the year 2000. The second phase of the project is examining not-in-kind and next-generation technologies that could be developed to replace CFCs, HCFCs, and HFCs over a longer period. As part of this effort, Oak Ridge National Laboratory held a workshop on June 23--25, 1993. The preliminary agenda covered a broad range of alternative technologies and at least one speaker was invited to make a brief presentation at the workshop on each technology. Some of the invited speakers were unable to participate, and in a few cases other experts could not be identified. As a result, those technologies were not represented at the workshop. Each speaker was asked to prepare a five to seven page paper addressing six key issues concerning the technology he/she is developing. These points are listed in the sidebar. Each expert also spoke for 20 to 25 minutes at the workshop and answered questions from the other participants concerning the presentation and area of expertise. The primary goal of the presentations and discussions was to identify the developmental state of the technology and to obtain comparable data on system efficiencies. Individual papers are indexed separately.

Equipment improvements for performance enhancement

International Nuclear Information System (INIS)

Gaestel, P.; Guesnon, H.; Sauze, G.

1994-01-01

In order to enhance the reactor availability, several improvements on reactor equipment have been developed: design optimization for stator maintenance replacement in the main alternator; adjustment modification of stator coils in the main alternator for an easier maintenance; improvement of the fuel handling line (pole crane, transfer equipment, loading machine); development of a loose part trapping system in the steam generator secondary circuit. 1 tab

International IAEA Emergency Response Workshop in Fukushima Concludes

International Nuclear Information System (INIS)

2013-01-01

Full text: An IAEA workshop aimed at further strengthening nuclear and radiological emergency preparedness and response capabilities concluded today in Fukushima, Japan. More than 40 participants from 18 countries took part in the four-day Response and Assistance Network (RANET) workshop, which included a field exercise in areas affected following the March 2011 accident at TEPCO's Fukushima Daiichi Nuclear Power Station. During the exercise, participants conducted radiation monitoring and environmental sampling and analysis. They measured the contamination level of the ground surface and conducted gamma spectrum analysis and vehicle-based monitoring - activities that are conducted following any nuclear or radiological incident or emergency. Results were then compared amongst participants. RANET is a network currently comprising 22 countries through which the IAEA can facilitate the provision of expert support and equipment on request under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency. Pat Kenny, IAEA RANET Officer, said the workshop provided an opportunity to practice cooperation between international teams that would be deployed through RANET following an emergency. 'By bringing together so many experts from different countries in one place, the workshop helped us learn how international teams can work together to provide assistance in a nuclear or radiological emergency situation,' he said. 'It also enabled us to improve the coordination of such assistance, and it gave participants the opportunity to learn from each other.' The workshop was the first activity conducted from the IAEA RANET Capacity Building Centre, a new training centre based in the city of Fukushima that was designated earlier this week with the support of the Japanese Foreign Ministry and Fukushima Prefecture. The Centre will host RANET and other training courses, workshops and exercises aimed at enhancing nuclear emergency preparedness and response

Proceedings of the 1993 oil heat technology conference and workshop

Energy Technology Data Exchange (ETDEWEB)

McDonald, R.J.

1993-09-01

This report documents the proceedings of the 1993 Oil Heat Technology Conference and Workshop, held on March 25--26 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the seventh held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space- conditioning equipment. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

The research of medical equipment on-line detection system based on Android smartphone

Science.gov (United States)

Jiang, Junjie; Dong, Xinyu; Zhang, Hongjie; Liu, Mengjun

2017-06-01

With the unceasing enhancement of medical level, the expanding scale of medical institutions, medical equipment as an important tool for disease diagnosis, treatment and prevention, used in all levels of medical institutions. The quality and accuracy of the Medical equipment play a key role in the doctor's diagnosis and treatment effect, medical metrology as the important technical foundation is to ensure that the equipment, technology, material components are accurate and the application is safe and reliable. Medical equipment have the feature of variety, large quantity, long using cycle, expensive and multi-site, which bring great difficulty in maintenance, equipment management and verification. Therefore, how to get the medical measurement integrate deeply into the advanced internet technology, information technology and the new measuring method, for real-time monitoring of medical equipment, tracking, positioning, and query is particularly important.

Twenty-first workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1996-01-26

PREFACE The Twenty-First Workshop on Geothermal Reservoir Engineering was held at the Holiday Inn, Palo Alto on January 22-24, 1996. There were one-hundred fifty-five registered participants. Participants came from twenty foreign countries: Argentina, Austria, Canada, Costa Rica, El Salvador, France, Iceland, Indonesia, Italy, Japan, Mexico, The Netherlands, New Zealand, Nicaragua, the Philippines, Romania, Russia, Switzerland, Turkey and the UK. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Sixty-six papers were presented in the technical sessions of the workshop. Technical papers were organized into twenty sessions concerning: reservoir assessment, modeling, geology/geochemistry, fracture modeling hot dry rock, geoscience, low enthalpy, injection, well testing, drilling, adsorption and stimulation. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bobbie Bishop-Gollan, Tom Box, Jim Combs, John Counsil, Sabodh Garg, Malcolm Grant, Marcel0 Lippmann, Jim Lovekin, John Pritchett, Marshall Reed, Joel Renner, Subir Sanyal, Mike Shook, Alfred Truesdell and Ken Williamson. Jim Lovekin gave the post-dinner speech at the banquet and highlighted the exciting developments in the geothermal field which are taking place worldwide. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager.

High-Level Vision and Planning Workshop Proceedings

Science.gov (United States)

1989-08-01

Correspondence in Line Drawings of Multiple View-. In Proc. of 8th Intern. Joint Conf. on Artificial intellignece . 1983. [63] Tomiyasu, K. Tutorial...joint U.S.-Israeli workshop on artificial intelligence are provided in this Institute for Defense Analyses document. This document is based on a broad...participants is provided along with applicable references for individual papers. 14. SUBJECT TERMS 15. NUMBER OF PAGES Artificial Intelligence; Machine Vision

A "Mental-Health-at-the-Workplace" Educational Workshop Reduces Managers' Stigma Toward Depression.

Science.gov (United States)

Hamann, Johannes; Mendel, Rosmarie; Reichhart, Tatjana; Rummel-Kluge, Christine; Kissling, Werner

2016-01-01

Stigma and discrimination are important factors hindering people with mental health conditions to stay employed or successfully make their careers. We surveyed 580 German managers before and after visiting a "mental-health-at-the-workplace" educational workshop using the Depression Stigma Scale. The workshop significantly reduced stigma toward depression. Managers at baseline already exhibited lower stigma toward depression compared with the general population. In addition, female gender and higher education predicted lower stigma, which is in line with findings from other studies. We conclude that an educational workshop giving practical guidance regarding "mental-health-at-the-workplace" reduces managers' stigma toward depression and improves knowledge regarding depression, its course, and its treatment.

Writing Workshop as Carnival: Reflections on an Alternative Learning Environment.

Science.gov (United States)

Lensmire, Timothy J.

Mikhail Bakhtin's understanding of the medieval carnival--a time when life is turned upside down, social hierarchies are lifted, and the lines between performer and participant are blurred--provides a useful framework for understanding both liberatory and potentially threatening aspects of writing workshops in elementary schools. An experimental…

Developing workshop module of realistic mathematics education: Follow-up workshop

Science.gov (United States)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Creating Fantastic PI Workshops

Energy Technology Data Exchange (ETDEWEB)

Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

NOW ON THE WEB SALES AND PURCHASE OF OBSOLETE OR SURPLUS EQUIPMENT

CERN Multimedia

2000-01-01

The Recuperation and Sales Service wishes to recall that obsolete or surplus equipment which is no longer needed at CERN may be sold to outside institutes, members of the personnel, companies, etc. For this purpose an 'on-line sales and purchase tool' has been developed and installed on the web: consult the 'Recuperation and Sales Service' site on the CERN homepage. Users wishing to eliminate or sell obsolete or surplus equipment are invited to use the tool to issue an 'on-line sales request' and users who are looking for cheap 2nd hand equipment may consult the 'on-line sales catalogue' and make 'on-line purchase bids'. The direct sale of low value equipment, which takes place Thursdays 13h30 ­ 15h30 in the Recuperation Centre, building 133, will continue as before. For more information contact the Recuperation & Sales Service, tel. 75782 or 78665.

Days individual equipment of protection and professional risks

International Nuclear Information System (INIS)

2007-01-01

The personal protection equipment is studied in the legal way (legal liabilities, certification, European texts), technical way (ergonomics, painfulness of ventilated equipment wearing, reliability of a respirable air line, protection gloves against the chemical risk, exposure to nano particulates, working in hot area), human factors (hostile area and emotion management), studies on personal equipment such evaluation, efficiency, conception of new equipment, physiological tolerance, limit of use, and some general safety studies on the working places. (N.C.)

Sprayed concrete linings

Energy Technology Data Exchange (ETDEWEB)

Hindle, D.

1999-12-01

Sprayed concrete, or shotcrete, was invented in the 1920s for preserving dinosaur skeletons and was used underground initially in coalmines for the preservation and fine proofing of timber supports. Its use as a support lining in rock tunnelling was developed in the 1950s and 60s. The article surveys equipment available from major manufacturers and suppliers of concrete spraying equipment (Aliva, Cifa, GIA, Industri, Ingersoll Rand, etc.), specialist cement and additive manufacturers (Castle, Cement, Moria Carbotech). manufacturers of lattice girders and fibre reinforcement, and manufacturers of instrumentation for tunnel linings. 5 tabs., 9 photos.

Joint WHO/ISH workshop on efficacy and radiation safety in interventional radiology

International Nuclear Information System (INIS)

Baeuml, A.; Bauer, B.; Bernhardt, J.H.; Stieve, F.E.; Veit, R.; Zeitlberger, I.

1997-02-01

With the constantly developing technology and the opening of new fields of application, the implementation of Interventional Radiology (IR) is increasing considerably. These sophisticated procedures can frequently replace open surgery, and this is of enormous benefit for the patient. On the other hand, IR involves prolonged application of fluoroscopy and - due to the need for excellent image quality - partly very high dose-rate levels. Additionally, cine-series, and alsogreat numbers of single radiographs are necessary. Accordingly, the levels of exposure to patients and staff are very high. In order to consider possible reduction of the radiation risks of IR procedures interdiciplinary talks between representatives of manufacturers of X-ray equipment, hospital physicists and the clinical community would seem necessary in order to find ways of avoiding unproductive radiation exposure to the patient and to clinical staff. This was the aim of a workshop on IR, which was jointly organized by the World Health Organization and the Institute of Radiation Hygiene of the Federal Office for Radiation Protection in Germany in October 1995. It was intended as a forum for the discussion of issues related to IR, and to forster improved application, that is to say as an opportunity: To present the state of the art; to work out proposals for more efficient clinical protocols; to discuss on schemes of education and training and on equipment-related developments. Improvement of radiation safety for both patients and staff, was the general aim of the workshop. This volume contains the presentations given on the first day of the workshop. (orig./DG) [de

Eighteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1993-01-28

PREFACE The Eighteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 26-28, 1993. There were one hundred and seventeen registered participants which was greater than the attendance last year. Participants were from eight foreign countries: Italy, Japan, United Kingdom, Mexico, New Zealand, the Philippines, Guatemala, and Iceland. Performance of many geothermal fields outside the United States was described in several of the papers. Dean Gary Ernst opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a brief overview of the Department of Energy's current plan. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Mock who also spoke at the banquet. Thirty-nine papers were presented at the Workshop with two papers submitted for publication only. Technical papers were organized in twelve sessions concerning: field operations, The Geysers, geoscience, hot-dry-rock, injection, modeling, slim hole wells, geochemistry, well test and wellbore. Session chairmen were major contributors to the program and we thank: John Counsil, Kathleen Enedy, Harry Olson, Eduardo Iglesias, Marcelo Lippmann, Paul Atkinson, Jim Lovekin, Marshall Reed, Antonio Correa, and David Faulder. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to John Hornbrook who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

International Nuclear Information System (INIS)

Brown, J.T.; Matthern, G.; Glenn, A.; Kauffman, J.; Rock, S.; Kuperberg, M.; Ainsworth, C.; Waugh, J.

2000-01-01

The Metals and Radionuclides Product Line of the US Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

Energy Technology Data Exchange (ETDEWEB)

J. T. Brown; G. Matthern; A. Glenn (INEEL); J. Kauffman (EnviroIssues); S. Rock (USEPA); M. Kuperberg (Florida State U); C. Ainsworth (PNNL); J. Waugh (Roy F. Weston Assoc.)

2000-02-01

The Metals and Radionuclides Product Line of the US Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies.

On-line Monitoring System for Power Transformers

Directory of Open Access Journals (Sweden)

Alexandru HOTEA

2016-12-01

Full Text Available Power transformers are the most important and expensive equipment from the electricity transmission system, so it is very important to know the real state of health of such equipment in every moment. De-energizing the power transformer accidentally due to internal defects can generate high costs. Annual maintenance proved to be ineffective in many cases to determine the internal condition of the equipment degradation due to faults rapidly evolving. An On-line Monitoring System for Power Transformers help real-time condition assessment and to detect errors early enough to take action to eliminate or minimize them. After abnormality detected, it is still important to perform full diagnostic tests to determine the exact condition of the equipment. On-line monitoring systems can help increase the level of availability and reliability of power transformers and lower costs of accidental interruption. This paper presents cases studies on several power transformers equipped with on-line monitoring systems from Transelectrica substation.

15th Cluster workshop

CERN Document Server

Laakso, Harri; Escoubet, C. Philippe; The Cluster Active Archive : Studying the Earth’s Space Plasma Environment

2010-01-01

Since the year 2000 the ESA Cluster mission has been investigating the small-scale structures and processes of the Earth's plasma environment, such as those involved in the interaction between the solar wind and the magnetospheric plasma, in global magnetotail dynamics, in cross-tail currents, and in the formation and dynamics of the neutral line and of plasmoids. This book contains presentations made at the 15th Cluster workshop held in March 2008. It also presents several articles about the Cluster Active Archive and its datasets, a few overview papers on the Cluster mission, and articles reporting on scientific findings on the solar wind, the magnetosheath, the magnetopause and the magnetotail.

Proceedings of the National Training Workshop on Neonatal Hypothyroidism Screening

International Nuclear Information System (INIS)

Osifo, B.O.A.

2002-05-01

The National Training Workshop on Neonatal Hypothyroidism screening project was conceived in 2000 and was held at the University of Ibadan from May 5 - May 8, 2002. The National Neonatal Hypothyroidism Screening project is a Technical Cooperation Project between the International Atomic Energy Agency and the Federal Government of Nigeria. The Workshop was organized to raise the awareness to the Health related professionals and Policy makers on the importance of screening for Neonatal Hypothyroidism in our country. Neonatal Hypothyroidism is a result of lack of the thyroid hormones in the neonates and this is mostly due to iodine deficiency in our environment - both in the soil and water. This lack of thyroid hormones in the neonates if not treated leads to a serious disease known as Cretinism. Cretinism affects both the mental and physical developments of these children. This Training Workshop focussed on the importance of the Screening programme for all urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates in Nigeria so as to identify the neonates that need urgent treatment. The Workshop also showed clearly that lack of care and treatment of such neonates would have a profound detrimental effect on the social and economical development of Nigeria. The spread of Iodine Deficiency in our country is nation wide. It is not based on political zoning system. Rather, Cretinism is a problem in our country and the participants are convinced that it can be prevented by the support of the Federal Government in the form of the provision of Transportation for the three centres in the country - Ibadan, Jos and Port-Harcourt, for collection of blood specimens and regular Counterpart Funding for this IAEA project. The organizers of this Workshop will like to express their sincere thanks to International Atomic Energy Agency who not only supplies all the equipment and reagents for this national project but also funded this National

2nd Topical Workshop on Laser Technology and Optics Design

CERN Document Server

2013-01-01

Lasers have a variety of applications in particle accelerator operation and will play a key role in the development of future particle accelerators by improving the generation of high brightness electron and exotic ion beams and through increasing the acceleration gradient. Lasers will also make an increasingly important contribution to the characterization of many complex particle beams by means of laser-based beam diagnostics methods. The second LANET topical workshop will address the key aspects of laser technology and optics design relevant to laser application to accelerators. The workshop will cover general optics design, provide an overview of different laser sources and discuss methods to characterize beams in details. Participants will be able to choose from a range of topical areas that go deeper in more specific aspects including tuneable lasers, design of transfer lines, noise sources and their elimination and non-linear optics effects. The format of the workshop will be mainly training-based wit...

Managing medical equipment used by technology-dependent children: evaluation of an instructional tool for pediatric residents and medical students.

Science.gov (United States)

Jackson, Jennifer M; Radulovic, Andrea; Nageswaran, Savithri

2012-08-01

To evaluate the effectiveness of a workshop on managing medical devices used in technology-dependent children. Study participants included residents and medical students rotating in the pediatrics department at the time of the study. A workshop was conducted consisting of learning stations for common medical devices, including brief presentations and opportunities for hands-on practice with each device. Participants completed surveys before and after the workshop assessing their perceived ability to manage medical equipment before and after the workshop and their ongoing learning needs. All participants indicated a substantial need for training on how to manage medical devices used by technology-dependent patients. Scores for perceived ability to manage the devices improved significantly after workshop participation for nearly all devices taught. Medical trainees have significant learning needs for managing devices used by technology-dependent patients. Hands-on, small-group training can be an effective instructional tool for improving confidence in these skills.

Workshops as a Research Methodology

Science.gov (United States)

Ørngreen, Rikke; Levinsen, Karin

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

Proceedings of the switched power workshop

International Nuclear Information System (INIS)

Fernow, R.C.

1988-01-01

These proceedings contain most of the presentations given at a workshop on the current state of research in techniques for switched power acceleration. The proceedings are divided, as was the workshop itself, into two parts. Part 1, contains the latest results from a number of groups active in switched power research. The major topic here is a method for switching externally supplied power onto a transmission line. Advocates for vacuum photodiode switching, solid state switching, gas switching, and synthetic pulse generation are all presented. Other important areas of research described in this section concern: external electrical and laser pulsing systems; the properties of the created electromagnetic pulse; structures used for transporting the electromagnetic pulse to the region where the electron beam is located; and possible applications. Part 2 of the proceedings considers the problem of designing a high brightness electron gun using switched power as the power source. This is an important first step in demonstrating the usefulness of switched power techniques for accelerator physics. In addition such a gun could have immediate practical importance for advanced acceleration studies since the brightness could exceed that of present sources by several orders of magnitude. I would like to take this opportunity to thank Kathleen Tuohy and Patricia Tuttle for their assistance in organizing and running the workshop. Their tireless efforts contribute greatly to a very productive meeting

Japan-IAEA Workshops on Advanced Safeguards for Future Nuclear Fuel Cycles

International Nuclear Information System (INIS)

Hoffheins, B.; Hori, M.; Suzuki, M.; Kuno, Y.; Kimura, N.; Naito, K.; Hosoya, M.; Khlebnikov, N.; Whichello, J.; Zendel, M.

2010-01-01

Beginning in 2007, the Japan Atomic Energy Agency (JAEA) and the International Atomic Energy Agency (IAEA) Department of Safeguards initiated a workshop series focused on advanced safeguards technologies for the future nuclear fuel cycle (NFC). The goals for these workshops were to address safeguards challenges, to share implementation experiences, to discuss fuel cycle plans and promising research and development, and to address other issues associated with safeguarding new fuel cycle facilities. Concurrently, the workshops also served to promote dialog and problem solving, and to foster closer collaborations for facility design and planning. These workshops have sought participation from IAEA Member States' support programmes (MSSP), the nuclear industry, R and D organizations, state systems of accounting and control (SSAC), regulators and inspectorates to ensure that all possible stakeholder views can be shared in an open process. Workshop presentations have covered, inter alia, national fuel cycle programs and plans, research progress in proliferation resistance (PR) and safeguardability, approaches for nuclear measurement accountancy of large material throughputs and difficult to access material, new and novel radiation detectors with increased sensitivity and automation, and lessons learned from recent development and operation of safeguards systems for complex facilities and the experiences of integrated safeguards (IS) in Japan. Although the title of the workshops presumes an emphasis on technology, participants recognized that early planning and organization, coupled with close cooperation among stakeholders, that is, through the application of 'Safeguards by Design' (SBD) processes that include nuclear safety and security coordination, 'Remote Inspections' and 'Joint-Use of Equipment (JUE)' would be required to enable more successful implementations of safeguards at future NFC facilities. The needs to cultivate the future workforce, effectively preserve

The Halden Reactor Project Workshop on Studies of Operator Performance During Night Shift's

International Nuclear Information System (INIS)

Morisseau, Dolores S.; Braarud, Per Oeyvind; Collier, Steve; Droeivoldsmo, Asgeir; Larsen, Marit; Lirvall, Peter

1996-01-01

A workshop on Studies of Operator Performance during Nights Shifts was organised in Halden, February 27-28, 1996. The purpose of the workshop was to discuss and make recommendations on specific needs for the study of operator cognitive performance at night and identify the relevant research issues for which Halden could provide resolution. The workshop began with presentations by several invited speakers with expertise in studies of shift work and was then divided into three working groups that discussed the following issues in parallel: (1) Lines of Research to Be Pursued; (2) Methods and Measures to Be Used in Research on Cognitive Performance at Nights; and (3) Products of the Research on Operator Performance at Night. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

40 CFR 82.158 - Standards for recycling and recovery equipment.

Science.gov (United States)

2010-07-01

... importers of recycling and recovery equipment intended for use during the maintenance, service, or repair of... recycling or recovery equipment at manufacturing facilities to ensure that each equipment model line that... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Standards for recycling and recovery...

Summary Report of Advanced Hydropower Innovations and Cost Reduction Workshop at Arlington, VA, November 5 & 6, 2015

Energy Technology Data Exchange (ETDEWEB)

O' Connor, Patrick [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rugani, Kelsey [Kearns & West, Inc., San Francisco, CA (United States); West, Anna [Kearns & West, Inc., San Francisco, CA (United States)

2016-03-01

On behalf of the U.S. Department of Energy (DOE) Wind and Water Power Technology Office (WWPTO), Oak Ridge National Laboratory (ORNL), hosted a day and half long workshop on November 5 and 6, 2015 in the Washington, D.C. metro area to discuss cost reduction opportunities in the development of hydropower projects. The workshop had a further targeted focus on the costs of small, low-head1 facilities at both non-powered dams (NPDs) and along undeveloped stream reaches (also known as New Stream-Reach Development or “NSD”). Workshop participants included a cross-section of seasoned experts, including project owners and developers, engineering and construction experts, conventional and next-generation equipment manufacturers, and others to identify the most promising ways to reduce costs and achieve improvements for hydropower projects.

MOOC Design Workshop

DEFF Research Database (Denmark)

Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

2016-01-01

For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

Report on the 13th Interdisciplinary Workshop on Intangibles and Intellectual Capital

DEFF Research Database (Denmark)

Schaper, Stefan; Manes Rossi, Francesca

Since its inception back in 2004, the EIASM Workshop on Intangibles and Intellectual Capital has established itself as a “must” on many researchers’ yearly conference agendas. This year’s edition took place September 21-22, hosted by the School of Economics “G. Fuà” of the Università Politecnica...... delle Marche and was organised by Professors Stefano Marasca, Maria Serena Chiucchi, and Marco Giuliani, and their team, in collaboration with the University of Ferrara. In line with the steadily increasing number of participants, the Workshop was attended by 145 participants from 21 countries...

77 FR 12313 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2012-02-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... District Office (DALDO), in collaboration with Oklahoma State University (OSU), Robert M. Kerr Food...

75 FR 29775 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2010-05-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2010-N-0001] Food and Drug Administration Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of...: Institute of Food Science & Engineering, University of Arkansas, 2650 North Young Ave., Fayetteville, AR...

Systems Engineering Workshops | Wind | NREL

Science.gov (United States)

Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

Sixteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1991-01-25

The Sixteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23-25, 1991. The Workshop Banquet Speaker was Dr. Mohinder Gulati of UNOCAL Geothermal. Dr. Gulati gave an inspiring talk on the impact of numerical simulation on development of geothermal energy both in The Geysers and the Philippines. Dr. Gulati was the first recipient of The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy. Dr. Frank Miller presented the award. The registered attendance figure of one hundred fifteen participants was up slightly from last year. There were seven foreign countries represented: Iceland, Italy, Philippines, Kenya, the United Kingdom, Mexico, and Japan. As last year, papers on about a dozen geothermal fields outside the United States were presented. There were thirty-six papers presented at the Workshop, and two papers were submitted for publication only. Attendees were welcomed by Dr. Khalid Aziz, Chairman of the Petroleum Engineering Department at Stanford. Opening remarks were presented by Dr. Roland Horne, followed by a discussion of the California Energy Commission's Geothermal Activities by Barbara Crowley, Vice Chairman; and J.E. ''Ted'' Mock's presentation of the DOE Geothermal Program: New Emphasis on Industrial Participation. Technical papers were organized in twelve sessions concerning: hot dry rock, geochemistry, tracer injection, field performance, modeling, and chemistry/gas. As in previous workshops, session chairpersons made major contributions to the program. Special thanks are due to Joel Renner, Jeff Tester, Jim Combs, Kathy Enedy, Elwood Baldwin, Sabodh Garg, Marcel0 Lippman, John Counsil, and Eduardo Iglesias. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Angharad Jones, Rosalee Benelli, Jeanne Mankinen, Ted Sumida, and Terri A. Ramey who also

Leadership Workshops for Adult Girl Scout Leaders

Science.gov (United States)

Lebofsky, Larry A.; McCarthy, Donald; DeVore, Edna; Harman, Pamela; Reaching Stars Team

2016-10-01

This year, the University of Arizona is conducting its first two Leadership Workshops for Girl Scout adult leaders. These workshops are being supported by a five-year NASA Collaborative Agreement, Reaching for the Stars: NASA Science for Girl Scouts (www.seti.org/GirlScoutStars), through the SETI Institute in collaboration with the University of Arizona, Girl Scouts of the USA (GSUSA), the Girl Scouts of Northern California, the Astronomical Society of the Pacific, and Aries Scientific, Inc. These workshops are an outgrowth of Astronomy Camp for Girl Scout Leaders, a 14-year "Train the Trainer" program funded by NASA through the James Webb Space Telescope's Near Infrared Camera (NIRCam) education and outreach team. We are continuing our long-term relationship with all Girl Scout Councils to engage girls and young women not only in science and math education, but also in the astronomical and technological concepts relating to NASA's scientific mission. Our training aligns with the GSUSA Journey: It's Your Planet-Love It! and introduces participants to some of the activities that are being developed by the Girl Scout Stars team for GSUSA's new space science badges for all Girl Scout levels being developed as a part of Reaching for the Stars: NASA Science for Girl Scouts.The workshops include hands-on activities in basic astronomy (night sky, stars, galaxies, optics, telescopes, etc.) as well as some more advanced concepts such as lookback time and the expansion of the Universe. Since the inception of our original Astronomy Camp in 2003, our team has grown to include nearly 280 adult leaders, staff, and volunteers from over 79 Councils in 43 states and the District of Columbia so they can, in turn, teach young women essential concepts in astronomy, the night sky environment, applied math, and engineering. Our workshops model what astronomers do by engaging participants in the process of science inquiry, while equipping adults to host astronomy-related programs with

The Fourth Workshop on Lineshape Code Comparison: Line Merging

Directory of Open Access Journals (Sweden)

Spiros Alexiou

2018-03-01

Full Text Available For a given set of plasma parameters, along a single series (Lyman, Balmer, etc. the lines with higher principal quantum number (n lines get progressively wider, closer to each other, and start merging for a certain critical n. In the present work, four different codes (with further options are used to calculate the entire Balmer series for moderate and high electron densities. Particular attention is paid to the relevant physics, such as the cutoff criteria, strong and penetrating electron collisions.

XIII International Workshop on Hadron Physics

CERN Document Server

2015-01-01

The XIII International Workshop on Hadron Physics, XIII Hadron Physics, is intended for graduate students, postdocs and researchers in Hadronic Physics, High Energy Physics, Astrophysics and Effective Field Theories, who wish to improve their theoretical background, learn about recent experimental results and develop collaboration projects. The series Hadron Physics, in activity since 1988, has the format of an advanced school and has the objective to introduce, in a series of pedagogical lectures, new lines of research in Strong Interaction Physics, mainly concerned with QCD. It envisages also to stimulate collaborations in international level.

Applied antineutrino physics workshop

International Nuclear Information System (INIS)

Lund, James C.

2008-01-01

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

On-line characterization of emulsions aiming equipment sizing and definition of primary processing conditions; Caracterizacao em tempo real de emulsoes visando o dimensionamento de equipamentos e a definicao das condicoes de processamento primario

Energy Technology Data Exchange (ETDEWEB)

Lucas, Gloria M.S. [Fundacao Gorceix, Ouro Preto, MG (Brazil); Oliveira, Roberto C.G. de [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

In this work are presented the results of the test of emulsion generation, carried out in the Experimental Nucleus of PETROBRAS in Atalaia city Brazil, in which equipment for on-line measurement of droplet size distribution was tested, whose operation principle is of acoustic attenuation. One of the objectives of this study was the validation of this technology for on-line characterization of petroleum emulsions, aiming at the optimization of the sub sea or top side processing equipment. The emulsions had been on-line monitored by the acoustic spectrometer, installed downstream of a choke valve. Samples of generated emulsions had been collected in different points of the circuit and characterized off-line how much its stability, droplet size distribution (DSD), water cut and viscosity. Moreover, in some stages of the test a demulsifier was injected so as to verify the behavior of emulsions. The acoustic spectrometry technique demonstrated to be efficient in the on-line characterization of the droplet size distributions of emulsions generated in different operational conditions. The acoustic technique presented satisfactory performance, in view of the comparison of the values of median gotten on-line and off-line. (author)

The CLEAN Workshop Series: Promoting Effective Pedagogy for Teaching Undergraduate Climate Science

Science.gov (United States)

Kirk, K. B.; Bruckner, M. Z.; Manduca, C. A.; Buhr, S. M.

2012-12-01

To prepare students to understand a changing climate, it is imperative that we equip educators with the best possible tools and methods for reaching their audience. As part of the Climate Literacy and Energy Awareness Network (CLEAN) professional development efforts, two workshops for undergraduate faculty were held in 2012. These workshops used a variety of activities to help faculty learn about recent climate research, take part in demonstrations of successful activities for teaching climate topics, and collaborate to create new teaching materials. The workshops also facilitated professional networking among participants. Both workshops were held online, eliminating the need for travel, encouraging participants without travel funds to attend, and allowing international collaborations and presentations. To create an authentic experience, the workshop used several technologies such as the Blackboard Collaborate web conferencing platform, SERC's web-based collaboration tools and online discussion threads, and conference calls. The workshop Communicating Climate Science in the Classroom, held in April 2012, explored practices for communicating climate science and policy in the classroom and provided strategies to improve student understanding of this complex and sensitive topic. Workshop presentations featured public opinion research on Americans' perceptions of climate change, tactics for identifying and resolving student misconceptions, and methods to address various "backfire effects" that can result from attempts to correct misinformation. Demonstrations of teaching approaches included a role-playing simulation of emissions negotiations, Princeton's climate stabilization wedges game, and an activity that allows students to use scientific principles to tackle misinformation. The workshop Teaching Climate Complexity was held in May 2012. Teaching the complexities of climate science requires an understanding of many facets of the Earth system and a robust pedagogic

Translocation of Soil Particles during Secondary Soil Tillage along Contour Lines

Directory of Open Access Journals (Sweden)

Novák Petr

2018-04-01

Full Text Available A high percentage of arable land and erosion risk on agricultural land are typical of current agriculture. While tillage erosion is a less frequently studied issue, it impacts vast areas of agricultural land. Not all relationships between cultivation equipment, the gradient of the plot and other factors have been known until now. Intensive soil tillage can be a crucial erosive factor mainly when the cultivation equipment moves in a fall line direction. Nevertheless, even when the equipment moves along contour lines, soil particles can be translocated perpendicular to the direction of the equipment movement (in a fall line direction. This phenomenon has not yet been adequately studied. For measurements, a field trial with secondary tillage of soil was laid out (a seedbed preparation implement was used. The objective of the trial was to evaluate the effect of the working tools of the cultivation equipment on the crosswise and lengthwise translocation of soil particles during soil tillage. Aluminium cubes, with a side length of 16 mm, were used as tracers. Before the operation, the tracers were inserted in a row perpendicular (at a right angle to a direction of the equipment passes. After the equipment passes, position of tracers was evaluated within a two-axis grid. The trial was performed at three gradients of the plot (2°, 6° and 11°. For each gradient, the 1-pass, 2-pass and 3-pass treatments were tested. The equipment always moved along the plot contour line. After the equipment passes in all treatments, all tracers were localized on an orthogonal grid. The results of the trial demonstrate the effect of the slope gradient on the crosswise translocation of particles during secondary tillage of soil in the slope direction. The tillage equipment translocated particles in the fall line direction even if it passed along the contour line. With the increasing intensity of passes, the effect of the equipment on crosswise translocation increases

Automatic creation of simulation configuration. The SIPA workshop: SWORD

International Nuclear Information System (INIS)

Oudot, G.; Valembois, A.

1994-01-01

SWORD (Software Workshop Oriented towards Research and Development) is not only a software management system but also and mainly a software development system. The SWORD workshop is organised in hierarchical levels: (1) the automatic or manual creation of elementary models based on FORTRAN ANSI standard language; these models have interface variables structured in so-called connection points; Automatic model generators are used for the simulation of standard, repeated equipment: HYTHERNET covers the simulation of hydraulic, thermal, chemistry and activity; CONTRONET covers the simulation of I and C system, i.e. logic, protection and control systems; The capture of system topology for both generators is carried out on a graphic workstation under CAD system, (2) The models assembly generator, in charge of linking models (via connection points) and organizing their calling sequence in order to create a simulation application, (3) The configurations in charge of creation of external environment and of links between models assembly and external environment (connection with control desk, plant computer system, safety parameter display etc.), (4) The configuration generator which exports the simulation configuration to the target machine and generates the appropriate command for compilations and link editions; The workshop Administration ensures management, consistency checks are carried out at each step with warnings generated when applicable, and automatic chaining of the appropriate commands according to engineer request are available. (orig.) (4 refs., 4 figs.)

Sodium cleaning device for nuclear reactor equipments

International Nuclear Information System (INIS)

Fujisawa, Morio.

1985-01-01

Purpose: To enable sodium cleaning over the entire length of large size equipments such as control rod drives and primary coolant recycling pumps for use in FBR type reactors. Constitution: A plurality of warm water supply nozzles each having a valve are connected at varying height on the side of a cleaning tank, to which an exhaust line is connected. These nozzles are connected with an exhaust port at the bottom of the tank to constitute a pipeway for cleaning warm water recycling line including a water feed pump and a feedwater heater. The water level in the tank is changed stepwise by successively selecting the warm water feed nozzles. Further, the warm water in the tank is recyclically fed through the nozzles selected at each step of the water level through the recycle line while warming. On the other hand, the pressure inside the tank is reduced through the exhaust line, whereby the warm water in the tank is boiled at low temperature to clean-up sodium on the equipments to be cleaned over the entire length. (Horiuchi, T.)

Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

Directory of Open Access Journals (Sweden)

Erin B. Jensen

2016-11-01

Full Text Available Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students preferred the online writing workshop because of the convenience of the workshop and being able to post anonymous reviews. Students whom preferred the traditional in-person writing workshop liked being able to talk with their peers about their papers. This research article focuses on the students’ responses and experiences with traditional and online peer-reviews.

Workshop on Life sciences and radiation

CERN Document Server

Life Sciences and Radiation : Accomplishments and Future Directions

2004-01-01

Scope and ideas of the workshop The workshop which took place at the University of Giessen from Oct. 3 to Oct. 7, 2002 and whose proceedings are collected in this volume started from the idea to convene a number of scientists with the aim to outline their ”visions” for the future of radiation research on the basis of their expertise. As radiation research is a very wide field restrictions were unavoidable. It was decided to concentrate this time mainly on molecular and cellular biology because it was felt that here action is par-ticularly needed. This did not exclude contributions from neighbouring fields as may be seen from the table of contents. It was clearly not planned to have a c- prehensive account of the present scientif fic achievements but the results presented should only serve as a starting point for the discussion of future lines of research, with the emphasis on the ”outreach” to other parts of life sciences. If you are interested in the future ask the young – we attempted, therefore, ...

ICP-MS Workshop

Energy Technology Data Exchange (ETDEWEB)

Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-11-01

This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

78 FR 33849 - Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request...

Science.gov (United States)

2013-06-05

... after the public workshop on the Internet at http://www.fda.gov/MedicalDevices/NewsEvents/Workshops..., compact, and mobile, the number of battery-powered medical devices will continue to increase. While many...] Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request for...

Workshop report of problems relating to multi-electron excited ions in plasma

International Nuclear Information System (INIS)

Fujimoto, Takashi; Suzuki, Hiroshi; Takayanagi, Toshinobu; Koike, Fumihiro; Nakamura, Koji.

1979-08-01

A workshop was held to discuss the problems relating to multiple electron-excited ions in plasma. The first part of this report deals with the problems of satellite lines. The satellite lines from laser plasma and vacuum sparks are discussed. Review papers on satellite lines and bielectronic recombination are also presented. The second part of this report deals with the problems of autoionization. Theory, comment on the compound state, observation of autoionization and resonance scattering, excitation cross-section, inner shell ionization, excitation through autoionization, and the bielectronic recombination of helium-like ions are discussed. (Kato, T.)

Proceedings of the workshop on 'possible scientific view from new neutron spectroscopy opportunities in J-PARC'

International Nuclear Information System (INIS)

Nakajima, Kenji; Shibata, Kaoru; Kajimoto, Ryoichi

2010-08-01

At Materials and Life Science Experimental Facility (MLF) at J-PARC, three chopper spectrometers, AMATERAS, 4SEASONS and HRC have been constructed and a near-backscattering spectrometer, DNA is under construction. By combination of a high intensity neutron source at MLF and advanced technologies equipped, these spectrometers are expected to open new possibilities in scientific research using neutron inelastic and quasi-elastic scattering methods. In such circumstances, the workshop entitled 'Possible Scientific View from New Neutron Spectroscopy Opportunities in J-PARC' was held on 8-9, July 2009 at Ibaraki Quantum Beam Research Center. The purpose of the workshop is to discuss the recent hot research topics and possible investigations utilizing the novel spectrometers at MLF in the wide range of the research field such as solid state physics, chemistry, material science, softmatter science, biology and industrial applications. This report includes abstracts and materials of the presentations in the workshop. (author)

47 CFR 15.609 - Marketing of Access BPL equipment.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Marketing of Access BPL equipment. 15.609 Section 15.609 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Access Broadband Over Power Line (Access BPL) § 15.609 Marketing of Access BPL equipment. The marketing of Access...

Workshop Proceedings

DEFF Research Database (Denmark)

2012-01-01

, the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

Project installation the large equipment in line system in Brazil. Gas export line valve P-40 FPSO-MLS. Field Marlim Sul, Campos Basin, Brazil; Operacao de instalacao do maior equipamento no sistema in line ja realizado no Brasil. Valvula do gasoduto P-40 X FPSO-MLS. Campo de Marlim Sul, Bacia de Campos, Brasil

Energy Technology Data Exchange (ETDEWEB)

Marques, Marcos Antonio Rodrigues; Fernandes, Paulo Tavares [PETROBRAS, Campos dos Goytacases, RJ (Brazil). Exploracao e Producao

2005-07-01

This work will approach the current level of development of the installation of connected underwater equipment to flexible lines in the underwater engineering operations in Campos' Basin. The project will show studies, analysis and simulations (through software developed by PETROBRAS) about the installation of the largest equipment laid in the 'in-line' system (connected to flexible lines) in Brazil - and one of the largest of the world: the ESDV (Emergency Shut Down Valve) of the gas pipeline P-40 x FPSO-MLS, in the South Marlim field, in Campos' Basin. This ESDV, of about 18.000 kg, 4 m height and 6,5 m length, has the purpose of assuring the safety conditions on the facilities, interrupting the gas flow exported for P-40 in case of emergency situations. Its installation opened a new alternative in releasing underwater equipment, using the ships that install the flexible lines. This operation occurred in June, 2004, and required the use of a second vessel for support and monitoring of the ESDV laying. The ESDV was installed at 400 m from FPSO-MLS, in a water depth of 1.137 m. This method shall be used broadly by the company in the implantation of the new units of Campos' Basin, and the upcoming studies must consider the gradual increase of the water depth in the new projects. This work will focus the technological development in this area, and one of its purposes is to foresee the future difficulties that can appear in the implantation of the production systems in deep and ultra-deep waters. (author)

Workshop summary. Biomedical and Space-Related Research with Heavy Ions at the BEVALAC

Science.gov (United States)

Schimmerling, W.; Curtis, S. B.

1989-01-01

The authors provide an overview of papers presented at a workshop on Biomedical and Space-Related Research with Heavy Ions at the BEVALAC at Lawrence Berkeley Laboratory. Goals of the meeting were to determine the critical experiments using heavy ions as probes in radiation physics, radiation chemistry, macromolecular and cellular biology, evolution science, basic neurophysiology, and medical therapies; how beam lines and facilities at Lawrence Berkeley Laboratory can be improved for these experiments; and implications in priorities and funding for national policy. Workshop topics included physics and facilities, cellular and molecular biology, tissue radiobiology, and the future of heavy ion research.

Workshop report

African Journals Online (AJOL)

abp

2017-09-14

Sep 14, 2017 ... health: report of first EQUIST training workshop in Nigeria .... The difference between the before and after measurements was ... After the administration of the pre-workshop questionnaire the ... represent Likert rating scale of 1-5 points, where 1point = grossly .... Procedures Manual for the "Evaluating.

Mjollnir Rotational Line Scan Diagnostics.

Science.gov (United States)

1981-05-19

using long cavity. M8 Removable Pellicle Beam Splitter for He-Ne Lineup Beam. Removed before HF or DF laser is turned on. 27 A 27 * A r of the chopper...three probe laser lines, however three lines were sequentially measured to verify the diagnostic equipment. Two of the three lines have been monitored

Workshops as a Research Methodology

DEFF Research Database (Denmark)

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

Availability of emergency drugs and equipment in general and specialist dental settings in Babol, Iran.

Science.gov (United States)

Mehdizadeh, Mohammad; Nosrati, Kamran; Hamzeh, Mahtab

2014-11-01

Medical emergencies can frequently happen in dental settings and it is critical to outfit the clinic by emergency drugs and equipment. The aim of this study was to evaluate the emergency drugs and equipment in general and specialist dental settings in Babol, Iran. A questionnaire containing closed ended questions about the available emergency drugs and equipment was used in this descriptive-analytical study. Data were subjected to descriptive analysis using SPSS 18.0 to identify the most frequent drugs and equipment. Chi-square and t-test were used to evaluate the correlation between the variables. p < 0.05 was considered statistically significant. One hundred and twelve dentists answered the questionnaire. The most available drug and equipment were epinephrine (67%) and single use syringe (81.3%) respectively. Significant correlation was found between degree of education and availability of first group of emergency drugs and between sex and possession of second group of emergency equipment (p < 0.05). Degree of availability of emergency drugs and equipment was moderate to low and training about emergencies should be included in the didactic topics of universities and workshops. Information about emergency drug and equipment would help to manage the unwanted emergency situations.

76 FR 31350 - Public Workshop; Privacy Compliance Basics and 2011 Developments

Science.gov (United States)

2011-05-31

... Privacy Act of 1974, as amended, the E-Government Act of 2002, Office of Management and Budget memoranda... telephone 703-235-0780; by facsimile 703-235-0442; or by e-mail at [email protected] . SUPPLEMENTARY INFORMATION... send an e-mail to [email protected] , with ``PRIVComplianceWorkshop'' in the subject line, and your full name...

Can Brief Workshop Interventions Change Care Staff Understanding of Challenging Behaviours?

Science.gov (United States)

Dowey, Alan; Toogood, Sandy; Hastings, Richard P.; Nash, Susie

2007-01-01

Background: The working culture surrounding challenging behaviour may have a strong effect on staff behaviour. As a first step to influencing staff talk about challenging behaviour, the aim of the present study was to explore whether a 1-day training workshop could have an effect on staff causal explanations. Methods: Fifty-four front line staff,…

Risk Management Techniques and Practice Workshop Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Quinn, T; Zosel, M

2008-12-02

At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and

Workshop meeting

International Nuclear Information System (INIS)

Veland, Oeystein

2004-04-01

1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

Ninth workshop on crystalline silicon solar cell materials and processes: Summary discussion sessions

International Nuclear Information System (INIS)

Sopori, B.; Tan, T.; Swanson, D.; Rosenblum, M.; Sinton, R.

1999-01-01

This report is a summary of the panel discussions included with the Ninth Workshop on Crystalline Silicon Solar Cell Materials and Processes. The theme for the workshop was ''R and D Challenges and Opportunities in Si Photovoltaics''. This theme was chosen because it appropriately reflects a host of challenges that the growing production of Si photovoltaics will be facing in the new millennium. The anticipated challenges will arise in developing strategies for cost reduction, increased production, higher throughput per manufacturing line, new sources of low-cost Si, and the introduction of new manufacturing processes for cell production. At the same time, technologies based on CdTe and CIS will come on line posing new competition. With these challenges come new opportunities for Si PV to wean itself from the microelectronics industry, to embark on a more aggressive program in thin-film Si solar cells, and to try new approaches to process monitoring

Voltage surges induced in transformer secondaries with loads characterized by sensitive electronic equipment

Energy Technology Data Exchange (ETDEWEB)

Cogo, Joao Roberto [GSI Engenharia e Consultoria Ltda., Taubate, SP (Brazil)], Email: gsi@gsiconsultoria.com.br; Dommel, Hermann Wilhelm [University of British Columbia, Vancouver (Canada)], Email: hermannd@ece.ubc.ca

2007-07-01

The grounding of sensitive electronic equipment such as computers, programmable logic controllers (PLC), process control systems, and other electronic equipment is one of the most important considerations towards obtaining an efficient operation of such systems. Such equipment, which for the purposes of this work is called 'Sensitive Electronic Equipment - SEE' is very sensitive to faults and low intensity random voltages which have no effect upon the electrical power equipment and upon human beings. In this work, the grounding problem is evaluated, to guide the user on the proper installation of SEEs, so as to prevent them from being damaged. The following items will be discussed: voltages which SEEs are subject to during incidence of atmospheric surges in the distribution overhead lines to which they are connected; sustained voltage that the high voltage supply of SEEs must be able to withstand during line-to-ground faults that originate from atmospheric surges that reach the transmission lines which are connected to the electrical power self producers (or electrical power independent producers). (author)

EERE Quality Control Workshop Final Report: Proceedings from the EERE Quality Control Workshop, in support of the DOE Clean Energy Manufacturing Initiative; Golden, Colorado, December 9-10, 2013

Energy Technology Data Exchange (ETDEWEB)

2014-05-01

The U.S. Department of Energy Office of Energy Efficiency & Renewable Energy (EERE) has recognized the cross-cutting, pre-competitive and enabling nature of quality control for a wide range of clean energy technologies. As such, the Fuel Cell Technologies Office, Solar Energy Technologies Office, Vehicle Technologies Office, Building Technologies Office, and Advanced Manufacturing Office decided to explore needs and potential cross-office synergies in this area by holding the EERE Quality Control Workshop, in support of the DOE Clean Energy Manufacturing Initiative. This report summarizes the purpose and scope of the workshop; reviews the current status and state-of-the-art for in-line quality control; summarizes the results from three breakout sessions; and presents conclusions and recommendations.

The local heat treatment equipment and technology of the pipelines welded joints

International Nuclear Information System (INIS)

Korol'kov, P.M.

1998-01-01

The principal methods and equipment for local treatment of the pipe-lines weld joints in different industry branches is described. Recommendations about heat treatment equipment and technology application are given

Establishment for Nuclear Equipment: Overview

International Nuclear Information System (INIS)

Pracz, J.

2001-01-01

Full text: The activity of ZdAJ in 2000 was focused on realisation of the Government-Ordered Project - 6/15 MeV Accelerator. The realisation was accomplished in two stages: - stage I should result in deriving principal operational parameters of the accelerator - stage 2 will result in full implementation of the control system providing optimum control of the equipment and automatic maintaining of its parameters. Within the frames of the first stage, a klystron modulator panel was finished and the design documentation of the mechanical supporting structure, the arm, accelerating structure, collimator and control panel were advanced. Manufacturing of the above sub-units in the workshop has started. In the frames of the Specific Project of the State Committee for Scientific Research, the improvement of Neptun lOPC accelerator was undertaken. The read-out of the monitor dose with atmospheric pressure and ambient temperature compensation has been introduced. New filters for equalising the photon and electron beam and new wedge filters have been designed. Changes in programming have been introduced, which improve the patient's safety by eliminating possible personnel errors and increase the accuracy of radiation fields read-out. In 2000 ZdAJ progressed in development of the Quality System conforming EN-ISO 9001 Standard by including the provisions of EN 46001 Standard. The Standard EN 46001: ''Quality Systems - Medical Equipment''. Detailed requirements related to application of EN ISO 9001 is an European Quality Standard extending the provisions of EN ISO 9001 Standard over the manufacturers of medical equipment. (author)

Flow lines and export lines of Sabalo Gas Field - the engineering of a complex job; Flow lines e export lines de Sabalo - a engenharia da complexidade

Energy Technology Data Exchange (ETDEWEB)

Serodio, Conrado Jose Morbach [GDK Engenharia, Salvador, BA (Brazil)

2003-07-01

The construction of the natural gas flow lines and export lines system of the Sabalo field, in the far South of Bolivia is an unique job in the pipeline construction area. Its execution is a turning point in terms of engineering and construction technology in this industry. Among the Aguarague Cordillera (mountains), it runs across rocky canyons for more than 5 km, a 2.100 mt long narrow tunnel to overcome the mountains and steep hills along all the ROW length, with a total extension of 70 km, in line pipes ranging from 10'' and 12'' for the flow lines, 28'' for the gas export line and 8' for the condensate line. An integrated construction work plan was settled in order to face and overcome the complex construction situations found in every feet of the pipeline. Four simultaneous work sites were mobilized, 8 independent work fronts, 700 professionals and more than 150 pieces of heavy construction equipment, brought from 3 different countries. Special techniques were adopted also to handle the challenging detail engineering . All in all, the correct conjunction of a sound engineering work, planning, human resources and equipment and the managing flexibility to create alternatives and solutions at the fast pace required by a dynamic work schedule were essential to succeed, in a job with no room for mistakes. The successfully job completion open new possibilities to other challenging projects alike.(author)

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

Energy Technology Data Exchange (ETDEWEB)

Brown, Jay Thatcher; Matthern, Gretchen Elise; Glenn, Anne Williams; Kauffman, J.; Rock, S.; Kuperberg, M.; Ainsworkth, C.; Waugh, J.

2000-02-01

The Metals and Radionuclides Product Line of the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies. More specifically, the objectives of the workshop were to: · Determine the status of the existing baseline, including technological maturation, · Identify areas for future potential research, · Identify the key issues and recommendations for issue resolution, · Recommend a strategy for maturing key aspects of phytoremediation, · Improve communication and collaboration among organizations currently involved in phytoremediation research, and · Identify technical barriers to making phytoremediation commercially

33 CFR 183.562 - Metallic fuel lines.

Science.gov (United States)

2010-07-01

...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.562 Metallic fuel lines. (a) Each metallic fuel line that is mounted to the boat structure must be connected to the engine by a flexible fuel line. (b) Each metallic fuel line must be attached to the boat's structure...

Proceedings of the 1991 Oil Heat Technology Conference and Workshop

Energy Technology Data Exchange (ETDEWEB)

McDonald, R.J.

1992-07-01

This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted to presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Development of vitrification line technology and the manufacture of equipment

International Nuclear Information System (INIS)

Alexa, J.

1989-01-01

The development is described of technology and the production of equipment for the vitrification of liquid radioactive wastes. For vitrification, frit Frita F270 is used containing up to 20% titanium and featuring a corrosion effect lower by one order than that of lead glass. The liquid waste is discharged in a measuring tank where it is mixed with formic acid. It is then pumped into an evaporator. Breed vapor is carried via a condenser to a condensate tank. The evaporator concentrate is transported to a homogenizer where it is gradually mixed with Frita. The viscous mush thus produced is carried into a furnace where the remaining water is evaporated. The furnace decontamination factor is 10 2 to 10 3 . At a temperature of up to 1,050 degC the frit melts and is discharged into a case. Currently, technology has been developed of mush preparation and the design has been completed of a vitrification furnace featuring remote lid opening and closing, and of equipment for processing furnace emissions. (J.B.). 3 figs., 1 tab., 1 ref

Development of Skylab medical equipment and flight preparations

Science.gov (United States)

Johnston, R. S.; Stonesifer, J. C.; Hawkins, W. R.

1975-01-01

The major medical systems in the Skylab orbital workshop are described. They comprise the food system, the waste management system, operational bioinstrumentation, personal hygiene, gas sampling, an inflight medical support system, and a cardiovascular counterpressure garment. Life sciences experiments carried out aboard Skylab are also reviewed; these include an ergometer and metabolic analyzer, a lower-body negative pressure device, an electrode harness and body temperature probe, a blood pressure cuff, a leg volume measuring band, sleep studies, a body-mass measuring device, a rotating litter chair, a blood sample processor, and small-mass measuring apparatus. All performance requirements were met with the equipment, and no failures were encountered.

2014 Penn State Bioinorganic Workshop

Energy Technology Data Exchange (ETDEWEB)

Golbeck, John [Pennsylvania State Univ., State College, PA (United States)

2015-10-01

The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.

INDICO Workshop

CERN Multimedia

CERN. Geneva; Fabbrichesi, Marco

2004-01-01

The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

Workshop on ethical issues and justification for high-dose budget-limited procedures: A report from an exploratory and consensus meeting held at Hairmyres Hospital, Scotland

International Nuclear Information System (INIS)

Corbett, R. H.; Malone, J.

2009-01-01

This summary report presents aspects of work that was carried out as part of the European Commission SENTINEL Project (Safety and Efficacy for New Techniques and Imaging using New Equipment to Support European Legislation). It arises from the discussions at a workshop organised by the first author at Hairmyres Hospital, East Kilbride in September 2006. The second author facilitated the workshop and moderated the discussion. The paper notes key points from the discussion and provides some pertinent comments. (authors)

Improving Undergraduates' Critical Thinking Skills through Peer-learning Workshops

Science.gov (United States)

Cole, S. B.

2013-12-01

Critical thinking skills are among the primary learning outcomes of undergraduate education, but they are rarely explicitly taught. Here I present a two-fold study aimed at analyzing undergraduate students' critical thinking and information literacy skills, and explicitly teaching these skills, in an introductory Planetary Science course. The purpose of the research was to examine the students' information-filtering skills and to develop a short series of peer-learning workshops that would enhance these skills in both the students' coursework and their everyday lives. The 4 workshops are designed to be easily adaptable to any college course, with little impact on the instructor's workload. They make use of material related to the course's content, enabling the instructor to complement a pre-existing syllabus while explicitly teaching students skills essential to their academic and non-academic lives. In order to gain an understanding of undergraduates' existing information-filtering skills, I examined the material that they consider to be appropriate sources for a college paper. I analyzed the Essay 1 bibliographies of a writing-based introductory Planetary Science course for non-majors. The 22 essays cited 135 (non-unique) references, only half of which were deemed suitable by their instructors. I divided the sources into several categories and classified them as recommended, recommended with caution, and unsuitable for this course. The unsuitable sources ranged from peer-reviewed journal articles, which these novice students were not equipped to properly interpret, to websites that cannot be relied upon for scientific information (e.g., factoidz.com, answersingenesis.org). The workshops aim to improve the students' information-filtering skills by sequentially teaching them to evaluate search engine results, identify claims made on websites and in news articles, evaluate the evidence presented, and identify specific correlation/causation fallacies in news articles

HAPO Plant and capital equipment budget for FY 1966 and revision of budget for FY 1965 equipment not related to construction projects

Energy Technology Data Exchange (ETDEWEB)

McDonald, J.E.

1964-05-12

This document is divided into: byproduct horizontal control rod system (5 reactors); high-speed scanning-effluent temperature monitoring system (KE reactor); improved reactor gas system (100-KE & KW); safety circuit system modifications (5 reactors); alternate process hot die sizing, 313 Building 300 Area; button line equipment (234-5 Building); in-tank waste solidification (3rd unit); and misc. minor equipment projects.

Research on the Emergence Modeling of Equipment System

Directory of Open Access Journals (Sweden)

He Xin-Hua

2017-01-01

Full Text Available Under the conditions of information, the network-centric system and the confrontation in the system has developed into a major combat style. But the traditional line of sexual assessment method is difficult to accurately assess the information equipment system combat capability. Therefore, this paper studies the effective evaluation method of the operational capability of the information equipment system from the perspective of emerge. Based on the simulation modeling and evaluation method, building the capability model of the weapon equipment system to evaluate the operational capability of the information weapon weaponry equipment. Through the example analysis, the validity of the simulation model and the practicability of the evaluation system is analyzed by analyzing the examples.

The QED Workshop

Energy Technology Data Exchange (ETDEWEB)

Pieper, G.W.

1994-07-01

On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

I Workshop Virtual Cibereduc: SEER: Periódicos eletrônicos: Editoração e acesso/I Workshop Virtual Cibereduc: SEER: Electronic journals – Editing and access

Directory of Open Access Journals (Sweden)

Suely de Brito Clemente Soares

2004-01-01

Full Text Available Descrição do “I Workshop Virtual CiberEduc”, ocorrido no dia 14.10.2004, das 9:00 às 11:00 horas. Foram conectadas duas salas de videoconferência, uma na Faculdade de Educação da UNICAMP, em Campinas, SP, e outra na RNP, Brasília, com retransmissão simultânea via Internet, o que permitiu aos participantes uma interação síncrona, mediante envio de perguntas para o e-mail ciberedu@unicamp.br. O tema discutido foi “SEER: periódicos eletrônicos: editoração e acesso”. As inscrições, gratuitas, foram feitas on-line. Os certificados ficaram disponíveis posteriormente, em formato PDF, para impressão, aos inscritos que comprovaram participação enviando, por e-mail, pelo menos uma pergunta sobre o SEER. Foram recebidas duzentos e dezoito inscrições e expedidos cento e vinte e seis certificados. Foram respondidas trinta e cinco perguntas durante o workshop e dez posteriormente, por e-mail. Dois servidores web da UNICAMP retransmitiram o evento. Instruções foram fornecidas antecipadamente aos inscritos, um telefone para contato durante o evento foi divulgado e, mesmo assim, nem todos os inscritos conseguiram conexão em tempo real. O vídeo do evento e os arquivos das apresentações ficaram disponíveis na Internet para consulta posterior. A experiência foi positiva, tanto na opinião dos organizadores, dos conferencistas, como dos inscritos, sendo um estímulo para a continuidade desses workshops virtuais. Description of the virtual event “I Workshop Virtual CiberEduc”, which had placed on the 14th of September 2004, from 9am to 11am. Two videoconference rooms were connected; one at the Faculdade de Educação da UNICAMP, in Campinas, São Paulo, and other at the Rede Nacional de Pesquisa in Brasília, with transmission on-line on the Internet, this fact allowed the synchronic interaction trough the use of e-mail for submission of questions to ciberedu@unicamp.br. Two Web servers of the UNICAMP were used to transmit

Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

Science.gov (United States)

Olaitan, Olawale O.; Ikeh, Joshua O.

2015-01-01

The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

Performance in the Science Fiction and Fantasy Writing Workshop

OpenAIRE

Angus, Tiffani

2017-01-01

This paper looks at the dynamic of science fiction and fantasy (SFF) writing workshop critique groups. Because of the nature of SFF as a fandom group, critiques and feedback in writing workshops—in this case, affinity groups with the same goal—can cross the line from participation to performance; group members tend to perform depending on their levels of cultural literacy and impostor syndrome, both of which influence fans working to become published writers. The performance can have positive...

Alternate fusion fuels workshop

International Nuclear Information System (INIS)

1981-06-01

The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached

The Third ATLAS ROD Workshop

CERN Multimedia

Poggioli, L.

A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

Proceedings: On-line monitoring of corrosion an water chemistry for the electric power utility industry: An EPRI workshop held during the 12th International Corrosion Congress

International Nuclear Information System (INIS)

Licina, G.

1994-03-01

A two-day EPRI workshop on On-line Monitoring of Corrosion and Water Chemistry for the Electric Power Utility Industry included discussions on a variety of methods for the online monitoring of corrosion and water chemistry in a power plant environment. The workshop was held September 22 and 23, 1993 in Houston, Texas, as a part of the 12th International Corrosion Congress sponsored by NACE International. Methods in various stages of development, from laboratory demonstrations to in-plant monitoring, were presented by authors from all over the world. Recent developments in corrosion monitoring and the detection of specific chemical species in power plant environments have utilized a variety of electrochemical methods (both AC and DC), electrical resistance techniques, and potential drop techniques to evaluate crack extension. Other approaches, such as Raman spectroscopy of corroding surfaces, Specific ion detectors, and X-ray fluorescence and ion chromatography to analyze corrosion products have been demonstrated in the laboratory. Techniques that were described in the twenty-three technical papers included: Electrochemical noise, Electrical resistance, Field signature method, Linear polarization resistance, Neutron activation, Corrosion potential monitoring, Electrochemical detection of biofilm activity, Analysis of corrosion products by X-ray fluorescence, Potential drop method for assessing environmentally assisted crack growth, Harmonic impedance spectroscopy, Contact electric resistance, Conductivity and hydrogen sensors, Solid state methods for tracking oxygen and pH, and Raman spectroscopy. Individual papers are indexed separately

2015 Inverter Workshop | Photovoltaic Research | NREL

Science.gov (United States)

Inverter Workshop 2015 Inverter Workshop Wednesday, February 25, 2015 Chair: Jack Flicker In about inverters. This workshop represented a follow-on to the inverter workshops that Sandia National conversations between module and inverter experts. Agenda For a detailed schedule of the day's events, access

First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

2013-11-01

This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

The Second Workshop on Lineshape Code Comparison: Isolated Lines

Directory of Open Access Journals (Sweden)

Spiros Alexiou

2014-05-01

Full Text Available In this work, we briefly summarize the theoretical aspects of isolated line broadening. We present and discuss test run comparisons from different participating lineshape codes for the 2s-2p transition for LiI, B III and NV.

Tandem mirror theory workshop

International Nuclear Information System (INIS)

1981-05-01

The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

International Nuclear Information System (INIS)

1999-08-01

Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

75 FR 58411 - Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments

Science.gov (United States)

2010-09-24

...] Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments AGENCY: Food... Drug Administration (FDA) is announcing a public workshop entitled: ``Center for Veterinary Medicine... be emailed to all registrants. Contact Person: Charles Andres, Center for Veterinary Medicine (HFV...

Summary of the CERN Workshop on Materials for Collimators and Beam Absorbers

CERN Document Server

Schmidt, R; Bertarelli, A; Ferrari, A; Weterings, W; Mokhov, N V

2008-01-01

The main focus of the workshop was on collimators and beam absorbers for (mainly) High Energy Hadron Accelerators, with the energy stored in the beams far above damage limit. The objective was to better understand the technological limits imposed by mechanisms related to beam impact on materials. The idea to organise this workshop came up during the High Intensity High Brightness Hadron Beams, ICFA-HB2006 in Japan [1]. The workshop was organised 3-5 September 2007 at CERN, with about 60 participants, including 20 from outside CERN. About 30 presentations were given [2]. The event was driven by the LHC challenge, with more than 360 MJoule stored in each proton beam. The entire beam or its fraction will interact with LHC collimators and beam absorbers, and with the LHC beam dump blocks. Collimators and beam absorbers are also of the interest for other labs and accelerators: - CERN: for the CNGS target, for SPS beam absorbers (extraction protection) and collimators for protecting the transfer line between SPS an...

Proceedings of the Canadian Gas Association's western operations workshop : readiness : reduce the risk

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The natural gas industry is now facing a number of challenges related to energy infrastructure security and new regulations regarding pipeline and employee safety. Organized by the Canadian Gas Association (CGA), this workshop provided a forum for gas distribution companies, transmission companies, and service providers to discuss issues related to the delivery of natural gas in Canada. While the workshop also included tours and descriptions of specific natural gas facilities and operational centres, several of the breakout sessions during the workshop were used to discuss natural gas technologies and planning procedures related to safety and security. Planning process improvements using risk analysis for operations were discussed. Safety strategies for the 2010 Olympics relating to critical infrastructure protection were reviewed. Issues concerning emergency response preparedness were examined, as well as threats to energy infrastructure from acts of terrorism. Recent innovations in fire retardant clothing were presented. Technological innovations presented at the workshop included a cold weather technology line heater, and new technologies in underground pipe manufacturing. Human resources issues included new approaches to stress management and employee support and safety. The workshop featured 12 breakout sessions, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Network workshop

DEFF Research Database (Denmark)

Bruun, Jesper; Evans, Robert Harry

2014-01-01

This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

Workshop report: US-China workshop on smart structures and smart systems

Science.gov (United States)

Tomizuka, Masayoshi

2006-03-01

A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

Equipment for inspection of austenitic stainless steel pipe welds

International Nuclear Information System (INIS)

Boehmer, W.D.; Horn, J.E.

1979-01-01

A computer controlled ultrasonic scanning system and a data acquisition and analysis system have been developed to perform the inservice inspection of welds in stainless steel sodium piping in the Fast Flux Test Facility. The scanning equipment consists of a six axis motion mechanism and control system which allows full articulation of an ultrasonic transducer as it follows the circumferential pipe welds. The data acquisition and analysis system consists of high speed ultrasonic waveform digitizing equipment, dedicated processors to perform on-line analysis, and data storage and display equipment

The Astronomy Workshop

Science.gov (United States)

Hamilton, D. P.; Asbury, M. L.; Proctor, A.

2001-12-01

The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

Innovative confinement concepts workshop

International Nuclear Information System (INIS)

Kirkpatrick, R.C.

1998-01-01

The Innovative Confinement Concepts Workshop occurred in California during the week preceding the Second Symposium on Current Trends in International Fusion Research. An informal report was made to the Second Symposium. A summary of the Workshop concluded that some very promising ideas were presented, that innovative concept development is a central element of the restructured US DOE. Fusion Energy Sciences program, and that the Workshop should promote real scientific progress in fusion

IPCC workshop on impacts of ocean acidification on marine biology and ecosystems. Workshop report

Energy Technology Data Exchange (ETDEWEB)

Field, C.B.; Barros, V.; Stocker, T.F.; Dahe, Q.; Mach, K.J.; Plattner, G.-K.; Mastrandrea, M.D.; Tignor, M.; Ebi, K.L.

2011-09-15

Understanding the effects of increasing atmospheric CO{sub 2} concentrations on ocean chemistry, commonly termed ocean acidification, as well as associated impacts on marine biology and ecosystems, is an important component of scientific knowledge about global change. The Fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC) will include comprehensive coverage of ocean acidification and its impacts, including potential feedbacks to the climate system. To support ongoing AR5 assessment efforts, Working Group II and Working Group I (WGII and WGI) of the IPCC held a joint Workshop on Impacts of Ocean Acidification on Marine Biology and Ecosystems in Okinawa, Japan, from 17 to 19 January 2011. The workshop convened experts from the scientific community, including WGII and WGI AR5 authors and review editors, to synthesise scientific understanding of changes in ocean chemistry due to increased CO{sub 2} and of impacts of this changing chemistry on marine organisms, ecosystems, and ecosystem services. This workshop report summarises the scientific content and perspectives presented and discussed during the workshop. It provides syntheses of these perspectives for the workshop's core topics: (i) the changing chemistry of the oceans, (ii) impacts of ocean acidification for individual organisms, and (iii) scaling up responses from individual organisms to ecosystems. It also presents summaries of workshop discussions of key cross-cutting themes, ranging from detection and attribution of ocean acidification and its impacts to understanding ocean acidification in the context of other stressors on marine systems. Additionally, the workshop report includes extended abstracts for keynote and poster presentations at the workshop. (Author)

Workshop on Subcritical Neutron Production

International Nuclear Information System (INIS)

Walter Sadowski; Roald Sagdeev

2006-01-01

Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

Characteristics of welding fume aerosol investigated in three Swedish workshops

International Nuclear Information System (INIS)

Isaxon, C; Pagels, J; Gudmundsson, A; Bohgard, M; Asbach, C; John, A C; Kuhlbusch, T A J; Karlsson, J E; Kammer, R; Tinnerberg, H; Nielsen, J

2009-01-01

Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.

Characteristics of welding fume aerosol investigated in three Swedish workshops

Energy Technology Data Exchange (ETDEWEB)

Isaxon, C; Pagels, J; Gudmundsson, A; Bohgard, M [Division of Ergonomics and Aerosol Technology (EAT), Lund University, Faculty of Engineering, PO Box 118, SE-221 00, Lund (Sweden); Asbach, C; John, A C; Kuhlbusch, T A J [Institute of Energy and Environmental Technology, (IUTA), Duisburg (Germany); Karlsson, J E; Kammer, R; Tinnerberg, H; Nielsen, J [Occupational and Environmental Health, Lund University, University Hospital, Lund (Sweden)

2009-02-01

Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.

Attribute measurement systems prototypes and equipment in the United States

International Nuclear Information System (INIS)

Langner, D.C.; Landry, R.P.; Hsue, S.-T.; MacArthur, D.W.; Mayo, D.R.; Smith, M.K.; Nicholas, N.J.; Whiteson, R.

2001-01-01

Since the fall of 1997, the United States has been developing prototypical attribute verification technology for potential use by the International Atomic Energy Agency (IAEA) under the Trilateral Initiative. The first attribute measurement equipment demonstration took place in December 1997 at the Lawrence Livermore National Laboratory. This demonstration led to a series of joint Russian Federatioin/US/IAEA technical discussions that focused on attribute measurement technology that could be applied to plutonium bearing items having classified characteristics. A first prototype attribute verification system with an information barrier was demonstrated at a Trilateral Technical Workshop in June 1999 at Los Alamos. This prototype nourished further fruitful discussions between the three parties that has in turn led to the documents discussed in a previous paper. Prototype development has continued in the US, under other initiatives, using an integrated approach that includes the Trilatleral Initiative. Specifically for the Trilateral Initiative, US development has turned to some peripheral equipment that would support verifications by the IAEA. This equipment includes an authentication tool for measurement systems with information barriers and in situ probes that would facilitate inspections by reducing the need to move material out of storage locations for reverification. In this paper, we will first summarize the development of attribute verification measurement system technology in the US and then report on the status of the development of other equipment to support the Trilateral Initiative.

Equipment specifications for an electrochemical fuel reprocessing plant

International Nuclear Information System (INIS)

Hemphill, Kevin P.

2010-01-01

Electrochemical reprocessing is a technique used to chemically separate and dissolve the components of spent nuclear fuel, in order to produce new metal fuel. There are several different variations to electrochemical reprocessing. These variations are accounted for by both the production of different types of spent nuclear fuel, as well as different states and organizations doing research in the field. For this electrochemical reprocessing plant, the spent fuel will be in the metallurgical form, a product of fast breeder reactors, which are used in many nuclear power plants. The equipment line for this process is divided into two main categories, the fuel refining equipment and the fuel fabrication equipment. The fuel refining equipment is responsible for separating out the plutonium and uranium together, while getting rid of the minor transuranic elements and fission products. The fuel fabrication equipment will then convert this plutonium and uranium mixture into readily usable metal fuel.

PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

Energy Technology Data Exchange (ETDEWEB)

MCDONALD,R.J.

1999-04-01

The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their help and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.

IPHE Infrastructure Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

2010-02-01

This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

Applications of ion beam analysis workshop. Workshop handbook

International Nuclear Information System (INIS)

1995-01-01

A workshop on applications of ion beam analysis was held at ANSTO, immediate prior to the IBMM-95 Conference in Canberra. It aims was to review developments and current status on use of ion beams for analysis, emphasizing the following aspects: fundamental ion beam research and secondary effects of ion beams; material sciences, geological, life sciences, environmental and industrial applications; computing codes for use in accelerator research; high energy heavy ion scattering and recoil; recent technological development using ion beams. The handbook contains the workshop's program, 29 abstracts and a list of participants

46 CFR 154.1170 - Hand hose line: General.

Science.gov (United States)

2010-10-01

... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Firefighting System: Dry Chemical § 154.1170 Hand hose line: General. Each dry chemical hand hose line must: (a...

Process equipment waste and process waste liquid collection systems

International Nuclear Information System (INIS)

1990-06-01

The US DOE has prepared an environmental assessment for construction related to the Process Equipment Waste (PEW) and Process Waste Liquid (PWL) Collection System Tasks at the Idaho Chemical Processing Plant. This report describes and evaluates the environmental impacts of the proposed action (and alternatives). The purpose of the proposed action would be to ensure that the PEW and PWL collection systems, a series of enclosed process hazardous waste, and radioactive waste lines and associated equipment, would be brought into compliance with applicable State and Federal hazardous waste regulations. This would be accomplished primarily by rerouting the lines to stay within the buildings where the lined floors of the cells and corridors would provide secondary containment. Leak detection would be provided via instrumented collection sumps locate din the cells and corridors. Hazardous waste transfer lines that are routed outside buildings will be constructed using pipe-in-pipe techniques with leak detection instrumentation in the interstitial area. The need for the proposed action was identified when a DOE-sponsored Resource Conservation and Recovery Act (RCRA) compliance assessment of the ICPP facilities found that singly-contained waste lines ran buried in the soil under some of the original facilities. These lines carried wastes with a pH of less than 2.0, which were hazardous waste according to the RCRA standards. 20 refs., 7 figs., 1 tab

Summer 1994 Computational Science Workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

Vulcano Workshop 2016

CERN Document Server

Mannocchi, G.; Morselli, A.; Trinchero, G.

2016-01-01

We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

In-line metallurgical process control in the steel industry

International Nuclear Information System (INIS)

Wanin, M.

1993-01-01

The steel products manufacturing involves a long line of complex processes: liquid metal elaboration, solidification, hot and cold transformation by rolling surface protection by coating. The Process Control aims at improving global productivity and quality of the resulting products by optimizing each elementary process as well as management of tools or workshops interfaces. Complex processes, involving generally many variables, require for their control more or less sophisticated models. These process models are either analytical when physical and thermodynamical mechanisms are known or statistical or knowledge based, according to circumstances. In any case, it is necessary to have a reliable and precise instrumentation to adjust undetermined parameters during model development and to be able to take into account external parameters variability during current working. This instrumentation concerns both running of machines and testing of manufactured materials under harsh environment conditions of Iron and Steel industry: temperature, dusts, steam, electromagnetic interferences, vibrations, .. . In this context, in-line Non Destructive Testing methods contribute efficienly because they may give directly and in real time products characteristics, integrating both drifts of machines and sensors due to their ageing and the abnormal spread of material entering the process. These methods induce the development of sophisticated inspection equipments whose strategic significance is such that their failure to operate can require production shutdown. The paper gives some representative examples of improvement of the accuracy of an in-line measurement or controlling of elementary processes or processes interfaces: temperature measurement by infrared pyrometry, thickness profile determination by X-ray array sensor, recrystallization control in continuous by X-ray and ultrasonic methods, automatic detection and indentification of surface defects by optics, cracks detection on

Extreme Weather and Climate: Workshop Report

Science.gov (United States)

Sobel, Adam; Camargo, Suzana; Debucquoy, Wim; Deodatis, George; Gerrard, Michael; Hall, Timothy; Hallman, Robert; Keenan, Jesse; Lall, Upmanu; Levy, Marc;

MO-AB-210-02: Ultrasound Imaging and Therapy-Hands On Workshop

International Nuclear Information System (INIS)

Sammet, S.

2015-01-01

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

MO-AB-210-01: Ultrasound Imaging and Therapy-Hands On Workshop

International Nuclear Information System (INIS)

Lu, Z.

2015-01-01

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

MO-AB-210-02: Ultrasound Imaging and Therapy-Hands On Workshop

Energy Technology Data Exchange (ETDEWEB)

Sammet, S. [University of Chicago Medical Center (United States)

2015-06-15

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

MO-AB-210-01: Ultrasound Imaging and Therapy-Hands On Workshop

Energy Technology Data Exchange (ETDEWEB)

Lu, Z. [University of Chicago (United States)

2015-06-15

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

Report of the Orientation Workshop

DEFF Research Database (Denmark)

Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

2014-01-01

This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

Start up testing for the secure automated fabrication line

International Nuclear Information System (INIS)

Gerber, E.W.; Benson, E.M.; Dahl, R.E.

1987-01-01

The secure automated fabrication (SAF) line is a remotely operated, liquid metal reactor fuel fabrication process being built by Westinghouse Hanford Company for the Department of Energy. All process and control equipment is installed and start up testing has been initiated. Start up testing is comprised of five phases, each incorporating higher degrees of equipment integration, automation, and remote control. Testing methodology for SAF line start up is described in this report

OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

International Nuclear Information System (INIS)

2013-01-01

Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

Reports on the AAAI 1999 Workshop Program

OpenAIRE

Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

2000-01-01

The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

PV radiometrics workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

Myers, D.R.

1995-09-01

This report documents presentations and discussions held at the Photovoltaics Radiometeric Measurements Workshop conducted at Vail, Colorado, on July 24 and 25, 1995. The workshop was sponsored and financed by the Photovoltaic Module and Systems Performance and Engineering Project managed by Richard DeBlasio, Principal Investigator. That project is a component of the National Renewable Energy Laboratory (NREL) Photovoltaic Research and Development Program, conducted by NREL for the US Department of Energy, through the NREL Photovoltaic Engineering and Applications Branch, managed by Roland Hulstrom. Separate abstracts have been prepared for articles from this workshop.

Proceedings: The Appendix 'K' relief workshop

International Nuclear Information System (INIS)

1989-11-01

The licensing and operation of commercial LWRs were impacted significantly when Appendix 'K' requirements for loss-of-coolant accident (LOCA) and emergency core cooling systems (ECCS) analyses were implemented in 1974. The Appendix K requirements included both criteria and mandatory assumptions for LOCA analysis. Plants must meet these criteria, using analysis methods that have included very conservative assumptions, such as estimating decay heat energy as 20% greater than the 1971 American Nuclear Society standard. Additional constraints were placed on the application of specific models and correlations. The Appendix K requirements had a significant impact on licensing, analysis, fuel design, reload management, plant operation, and some supporting equipment. The overall impact of Appendix K could be translated into increased costs of millions of dollars per year to utilities. The Appendix 'K' Relief Workshop provided an improved understanding of the trade-offs -- both benefits and efforts required -- inherent in continuing to use existing analysis methods or adopting BE analysis under revised NRC rule. A range of options is available to each utility. The workshop explored options and benefits to the utility industry from LOCA/ECCS rule change. A forum for complete and open discussion of the issues germaine to the question of BE methodology versus existing methodology in view of LOCA/ECCS rule changes was incorporated. Both regulatory and utility perspectives on the implementation of proposed changes were discussed. Existing and planned efforts in developing and implementing BE uncertainty methodologies for plant-licensing application have been included. The individual papers have been cataloged separately

North Region ROW tool implementation workshop.

Science.gov (United States)

2010-08-02

Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...

洁净厂房的火灾危险性及防火对策%Fire hazards and fire-preventing countermeasures of cleaning workshop

Institute of Scientific and Technical Information of China (English)

王升平

2015-01-01

分析了洁净厂房在材料控制、人员疏散、防火分隔等方面的火灾危险性，探讨了洁净厂房的疏散设计、消防设施设置等方面的防火要点，并阐述了洁净厂房消防安全管理的要点内容。%The paper analyzes fire hazards of cleaning workshop from aspects of materials control,personnel evacuation and fire-preventing isola-tion,explores fire-preventing points of cleaning workshop including evacuation design and firefighting equipment setting and so on,and finally de-scribes important firefighting safety management contents of cleaning workshop.

RE-NUMERATE: A Workshop to Restore Essential Numerical Skills and Thinking via Astronomy Education

Science.gov (United States)

McCarthy, D.; Follette, K.

2013-04-01

The quality of science teaching for all ages is degraded by our students' gross lack of skills in elementary arithmetic and their unwillingness to think, and to express themselves, numerically. Out of frustration educators, and science communicators, often choose to avoid these problems, thereby reinforcing the belief that math is only needed in “math class” and preventing students from maturing into capable, well informed citizens. In this sense we teach students a pseudo science, not its real nature, beauty, and value. This workshop encourages and equips educators to immerse students in numerical thinking throughout a science course. The workshop begins by identifying common deficiencies in skills and attitudes among non-science collegians (freshman-senior) enrolled in General Education astronomy courses. The bulk of the workshop engages participants in well-tested techniques (e.g., presentation methods, curriculum, activities, mentoring approaches, etc.) for improving students' arithmetic skills, increasing their confidence, and improving their abilities in numerical expression. These techniques are grounded in 25+ years of experience in college classrooms and pre-college informal education. They are suited for use in classrooms (K-12 and college), informal venues, and science communication in general and could be applied across the standard school curriculum.

Seismic design assessment by experimental methods. Notes from the workshop. Working material

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees.

Seismic design assessment by experimental methods. Notes from the workshop. Working material

International Nuclear Information System (INIS)

2001-01-01

The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees

Dynamic defense workshop :

Energy Technology Data Exchange (ETDEWEB)

Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

2013-02-01

On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

UJV line for research into radioactive wastes solidification

International Nuclear Information System (INIS)

Neumann, L.; Feist, I.; Kepak, F.; Nachmilner, L.; Napravnik, J.; Novak, M.; Pecak, V.; Vojtech, O.

1985-01-01

An experimental line with a capacity of 0.01 m 3 /h was developed and built for research of the solidification of liquid radioactive wastes at the Nuclear Research Institute. The line allows the research and pilot plant testing of processes based on vitrification but also on other procedures including calcination. It consists of a horizontal calciner, a resistance melting unit, a homogenization device for research into cementation of the calcinate, and equipment for the disposal of gaseous emissions. The facility is provided with a control console which allows remote control and the control of all basic operating parameters. The design of the line allows its eventual completion with other equipment. (Z.M.)

Delivery Mechanisms for Rural Electrification. A report from a workshop

Energy Technology Data Exchange (ETDEWEB)

Gullberg, Monica; Ilskog, Elisabeth; Arvidson, Anders; Katyega, Maneno (eds.)

2004-04-01

delivery mechanisms. Furthermore, three working groups were formed, each to discuss one topic: (i) rural energy service demand, (ii) delivery mechanisms and (iii) institutional frameworks supporting rural energy service access and delivery mechanisms. Important messages from the workshop include: Modern energy services which support income-generating activities are important for rural development; Activities to help develop income-generating uses of modern energy services are important; Modern energy services are also important for improved social welfare, which includes domestic uses; The private market will only deliver these energy services to any larger extent if public support is provided; In one way or another, governments need to contribute money for rural development, including modern energy supply; Grid extension is not always the most appropriate solution for rural electrification; Local organisations (private or other) for system management are important but will need external support; For local initiatives it is important that there are possibilities to access credits; Markets for small decentralized energy systems (e.g. Solar Home Systems), need to develop service responsibilities, or appropriate training for customers to assure good function of installed equipment.

Data acquisition, remote control and equipment monitoring for ISOLDE RILIS

Science.gov (United States)

Rossel, R. E.; Fedosseev, V. N.; Marsh, B. A.; Richter, D.; Rothe, S.; Wendt, K. D. A.

2013-12-01

With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation of new pump lasers, commercial dye lasers and a complementary, fully solid-state titanium:sapphire laser system. The framework of the upgrade also required the setup of a network-extended, LabVIEW-based system for data acquisition, remote control and equipment monitoring, to support RILIS operators as well as ISOLDE users. The system contributes to four key aspects of RILIS operation: equipment monitoring, machine protection, automated self-reliance, and collaborative data acquisition. The overall concept, technologies used, implementation status and recent applications during the 2012 on-line operation period will be presented along with a summary of future developments.

DOE/DMS workshop on future synchrotron VUV and x-ray beam Lines

International Nuclear Information System (INIS)

Green, P.H.

1992-03-01

This document contains an overview of the participating DOE Laboratory beam line interests and the projected science to be addressed on these beam lines, both at new and existing synchrotron facilities. The scientific programs associated with present and planned synchrotron research by DOE Laboratories are discussed in chapters titled ''VUV and Soft X-Ray Research'' and ''Hard X-Ray Research.'' This research encompasses a broad range of the nation's scientific and technical research needs from fundamental to applied, in areas including environmental, biological, and physical sciences; new materials; and energy-related technologies. The projected cost of this proposed construction has been provided in tabular form using a uniform format so that anticipated DOE and outside funding agency contributions for construction and for research and development can be determined. The cost figures are, of course, subject to uncertainties of detailed design requirements and the availability of facility-designed generic components and outside vendors. The report also contains a compendium (as submitted by the beam line proposers) of the design capabilities, the anticipated costs, and the scientific programs of projected beam line construction at the four synchrotron facilities. A summary of the projected cost of these beam lines to be requested of DOE is compiled

Summer workshops for high-school science teachers

International Nuclear Information System (INIS)

Young, H.H.; Kohl, J.

1975-01-01

A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

International Nuclear Information System (INIS)

Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

2013-01-01

The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

Reports on the 2015 AAAI Workshop Program

OpenAIRE

Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

2015-01-01

AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

NKS Workshop on Radioanalytical Chemistry - Final report

DEFF Research Database (Denmark)

The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

Proceedings of the 1996 oil heat technology conference and workshop

Energy Technology Data Exchange (ETDEWEB)

McDonald, R.J.

1996-07-01

This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1996 Oil Technology Conference comprised: (a) fourteen technical papers, and (b) four workshops which focused on mainstream issues in oil-heating technology, namely: oilheat research agenda forum; fan atomized burner commercialization, applications, and product development; fuel quality, storage and maintenance--industry discussion; and application of oil heat venting tables, NFPA 31 standard. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

2017 Marine Hydrokinetic Instrumentation Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Driscoll, Frederick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mauer, Erik [U.S. Department of Energy; Rieks, Jeff [Allegheny Science and Technologies

2018-03-06

The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurement technologies. This report provides further detail on the workshop, objectives, and findings.

Workshop report on new directions in x-ray scattering

International Nuclear Information System (INIS)

Brown, G.; Del Grande, N.K.; Fuoss, P.; Mallett, J.H.; Pratt, R.; Templeton, D.

1987-01-01

This report is a summary of the Workshop on New Directions in X-Ray Scattering held at the Asilomar Conference Center, Pacific Grove, California, April 2-5, 1985. The report primarily consists of the edited transcript of the final review session of the workshop, in which members of a panel summarized the proceedings. It is clear that we are close to achieving an accurate theory of scattering in independent particle approximation, but for edge regions, there is need to go beyond this approach. Much of what is experimentally interesting in scattering is occurring between the photoabsorption edge and the photoelectric threshold. Applications in condensed matter and biological and chemical material studies are expanding, exploiting higher intensity sources and faster time resolution as in magnetic scattering and surface studies. Storage rings are now conventional sources, and new high-intensity beam lines are under development; the free electron laser is one of the more speculative sources. Recent work in x-ray scattering has led to advances in x-ray optics, and conversely, advances in x-ray optics have benefitted our understanding of x-ray scattering

Method for lowering explosives into a well and hoisting the equipment therefrom

Energy Technology Data Exchange (ETDEWEB)

Grigoryan, N G; Gushchin, N I; Fridlyander, L Ya; Vitseni, E M

1962-06-05

In order to lower the cost and simplifying the shooting and explosives procedure, the explosives and other equipment are lowered into a well on a wire line by means of their own weight. The hoisting of the shooting equipment is accomplished by means of a reactive engine attached to the device.

Physics Analysis Tools Workshop Report

CERN Multimedia

Assamagan, K A

A Physics Analysis Tools (PAT) workshop was held at the University of Tokyo in Tokyo Japan on May 15-19, 2006. Unlike the previous ones, this workshop brought together the core PAT developers and ATLAS users. The workshop was attended by 69 people from various institutions: Australia 5 Canada 1 China 6 CERN 4 Europe 7 Japan 32 Taiwan 3 USA 11 The agenda consisted of a 2-day tutorial for users, a 0.5-day user feedback discussion session between users and developers, and a 2-day core PAT workshop devoted to issues in Physics Analysis Tools activities. The tutorial, attended by users and developers, covered the following grounds: Event Selection with the TAG Event Selection Using the Athena-Aware NTuple Event Display Interactive Analysis within ATHENA Distributed Analysis Monte Carlo Truth Tools Trigger-Aware Analysis Event View By many accounts, the tutorial was useful. This workshop was the first time that the ATLAS Asia-Pacific community (Taiwan, Japan, China and Australia) go...

Performance of indigenous resistance welding equipment for PHWR fuel fabrication in NFC

International Nuclear Information System (INIS)

Hemantha Rao, G.V.S.; Jayaraj, R.N.; Prakash, M.S.; Gupta, U.C.; Ganguly, C.

1999-01-01

Indigenisation of critical equipment for manufacturing of PHWR fuel and automation in the production line have been the main thrust in NFC in recent years. As part of this endeavour, resistance welding equipment for end plug welding of Zircaloy-4 clad Uranium Oxide fuel pin and end plates of 19-element fuel bundles have been developed. The paper discusses the equipment design features, critical operating parameters and performance of these indigenous welding machines. (author)

Systems Engineering 2010 Workshop | Wind | NREL

Science.gov (United States)

0 Workshop Systems Engineering 2010 Workshop The 1st NREL Wind Energy Systems Engineering Workshop of the system engineering model. In the middle of the model is optimization, metric tracking &M model, capital cost model, and balance of station. Systems engineering represents a holistic

SPLASH'13 workshops summary

DEFF Research Database (Denmark)

Balzer, S.; Schultz, U. P.

2013-01-01

Following its long-standing tradition, SPLASH 2013 will host 19 high-quality workshops, allowing their participants to meet and discuss research questions with peers, to mature new and exciting ideas, and to build up communities and start new collaborations. SPLASH workshops complement the main t...

6th International Microbeam Workshop

Energy Technology Data Exchange (ETDEWEB)

Dr Kevin M. Prise

2004-01-01

The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

Nuclear Innovation Workshops Report

Energy Technology Data Exchange (ETDEWEB)

Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

IFPA Meeting 2013 Workshop Report II

DEFF Research Database (Denmark)

Ackerman, W E; Adamson, L; Carter, Anthony Michael

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At the IFPA meeting 2013 twelve themed workshops were presented, five of which are summarized in this report. These workshops related to various aspects of placental biology but collecti...

IFPA meeting 2012 workshop report I

DEFF Research Database (Denmark)

Ackerman, W E; Carter, Anthony Michael; De Mestre, A M

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At IFPA meeting 2012 there were twelve themed workshops, three of which are summarized in this report. These workshops related to various aspects of placental biology but collectively...

Evaluation of the Career Planning Workshop

Energy Technology Data Exchange (ETDEWEB)

Gibson, L.W.

1986-04-01

People who apply to participate in this workshop appear to be genuinely interested in personal development. Participants reported that they were not very happy with several aspects of their jobs prior to the workshop. Predominant personality characteristics of the participants were shyness, communication anxiety, reserved style, cautiousness, moodiness, energetic, hard-working and analytical minded. Participants were favorably impressed with the workshop. One of the most potent ways that the workshop impacts participants is through improved self understanding and enhanced self-esteem. Many people did change jobs following the workshop. Of those who did not actually change jobs, almost half reported that they had modified their present job to achieve a better person-job fit. Participants did not report many changes in their routine behavior although they kept the supervisor more informed of their job activity. Current job satisfaction is good among the participants. Although the workshop is fairly expensive to provide, the long range benefits in terms of enhanced levels of performance far outweigh the costs.

1998 federal technical standards workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

DOE-EPRI On-Line Monitoring Implementation Guidelines

International Nuclear Information System (INIS)

E. Davis, R. Bickford

2003-01-01

Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasibility of on-line monitoring at several participating nuclear plants. The results have been very encouraging, and substantial progress is anticipated in the coming years

ISEE-magnetopause observations - workshop results

International Nuclear Information System (INIS)

Paschmann, G.

1982-01-01

A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

IFPA meeting 2010 workshop report I

DEFF Research Database (Denmark)

Abad, C.; Antczak, D.F.; Carvalho, J.

2011-01-01

Workshops are an important part of the IFPA annual meeting. At IFPA Meeting 2010 there were twelve themed workshops, six of which are summarized in this report. 1. The immunology workshop focused on normal and pathological functions of the maternal immune system in pregnancy. 2. The transport wor...

MO-AB-210-03: Workshop [Advancements in high intensity focused ultrasound

Energy Technology Data Exchange (ETDEWEB)

Lu, Z. [University of Chicago (United States)

2015-06-15

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

Summary and report on four national environmental workshops

Energy Technology Data Exchange (ETDEWEB)

House, Peter W.

1980-07-01

Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

Workshop of medical physics

International Nuclear Information System (INIS)

1988-01-01

This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

Workshops on Writing Science

Indian Academy of Sciences (India)

2017-09-30

Sep 30, 2017 ... hands-on practice, feedback, mentoring and highly interactive sessions. The focus will be on work done as individuals and in teams. Maximum number of participants for the workshop is limited. The workshop is compulso- rily residential. Boarding and lodging free for selected candidates. Re-imbursement ...

Simultaneous Determination of Palladium and Platinum by On-line ...

African Journals Online (AJOL)

NJD

using high performance liquid chromatography equipped with an on-line enrichment technique. Prior to ... The on-line enrichment system (Waters Corporation, USA) that was ... Using an appropriate volume (industrial plant effluents 20 mL,.

Review of the SLAC and Les Houches workshops

International Nuclear Information System (INIS)

Prescott, C.Y.

1994-12-01

Polarized Electron Source workshops have been held at varying intervals, beginning in 1983 when Charles Sinclair convened the first at SLAC. Since that time, three workshops were held in conjunction with the International Spin Symposia and two at other occasions. The increasing importance of polarized electron beams at accelerators has stimulated interest in these workshops. Two workshops have been held since the last International Spin Symposium in Nagoya. In 1993, a workshop was held at SLAC, and in 1994 at Les Houches, a polarized electron beam session was held as part of a polarized beam and targets workshop. This report summarizes highlights from the latter two workshops

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter V: transient electromagnetics

International Nuclear Information System (INIS)

Kasai, Masao; Niikura, Setsuo; Ueda, Koju

1985-07-01

This report corresponds to Chapter V of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. Simulation results are shown for feedback control of plasma position, electromagnetic forces at disruptions, penetration of electric and magnetic fields, and benchmark tests for transient electromagnetics. Design guide lines for feedback control system and database assessments are also reported. (author)

WALLTURB International Workshop

CERN Document Server

Jimenez, Javier; Marusic, Ivan

2011-01-01

This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

Boiling water reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and workshop material and sponsors workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 simulator from the Moscow Engineering and Physics Institute, Russian Federation is presented in the IAEA publication: Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a pressurized water reactor (PWR) simulator developed by Cassiopeia Technologies Incorporated, Canada, is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003). This report consists of course material for workshops using a boiling water reactor (BWR) simulator. Cassiopeia Technologies Incorporated, developed the simulator and prepared this report for the IAEA

Transcript of the workshop to discuss plans for a National High Intensity Radioactive Nuclear Beam Facility

International Nuclear Information System (INIS)

Nitschke, J.M.

1989-01-01

Following the ''First International Conference on Radioactive Nuclear Beams'' in Berkeley, a workshop was held on October 19, 1989 at the Lawrence Berkeley Laboratory to discuss plans for a National High Intensity Radioactive Nuclear Beam (RNB) Facility. The purpose of the workshop was -- after having discussed during the conference the physics question that can be addressed with RNBs -- to evaluate more concretely the possibilities for actually constructing such a facility in this country. It is becoming increasingly apparent that facility producing beams of radioactive nuclei with extreme neutron-to-proton ratios is of high scientific interest and technically feasible. It would allow the study of nuclear structure and astrophysical reactions very far from the line of stable nuclei, and could provide new possibilities of reaching the long-sought island of stability of superheavy nuclei. Such facilities are under advanced consideration in Japan and at CERN in Europe. This paper contains a slightly edited transcript of the tape recording that was made of the workshop

Warehouse Sanitation Workshop Handbook.

Science.gov (United States)

Food and Drug Administration (DHHS/PHS), Washington, DC.

This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

Equipment Reliability Program in NPP Krsko

International Nuclear Information System (INIS)

Skaler, F.; Djetelic, N.

2006-01-01

Operation that is safe, reliable, effective and acceptable to public is the common message in a mission statement of commercial nuclear power plants (NPPs). To fulfill these goals, nuclear industry, among other areas, has to focus on: 1 Human Performance (HU) and 2 Equipment Reliability (EQ). The performance objective of HU is as follows: The behaviors of all personnel result in safe and reliable station operation. While unwanted human behaviors in operations mostly result directly in the event, the behavior flaws either in the area of maintenance or engineering usually cause decreased equipment reliability. Unsatisfied Human performance leads even the best designed power plants into significant operating events, which can be found as well-known examples in nuclear industry. Equipment reliability is today recognized as the key to success. While the human performance at most NPPs has been improving since the start of WANO / INPO / IAEA evaluations, the open energy market has forced the nuclear plants to reduce production costs and operate more reliably and effectively. The balance between these two (opposite) goals has made equipment reliability even more important for safe, reliable and efficient production. Insisting on on-line operation by ignoring some principles of safety could nowadays in a well-developed safety culture and human performance environment exceed the cost of electricity losses. In last decade the leading USA nuclear companies put a lot of effort to improve equipment reliability primarily based on INPO Equipment Reliability Program AP-913 at their NPP stations. The Equipment Reliability Program is the key program not only for safe and reliable operation, but also for the Life Cycle Management and Aging Management on the way to the nuclear power plant life extension. The purpose of Equipment Reliability process is to identify, organize, integrate and coordinate equipment reliability activities (preventive and predictive maintenance, maintenance

Application of Equipment Monitoring Technology in Nuclear Power Plants

International Nuclear Information System (INIS)

Kang, H. T.; Lee, J. K.; Lee, K. D.; Jo, S. H.

2012-01-01

The major goal of nuclear power industries during the past 10 years is to increase reliability and utility capacity factor. As the capacitor factor, however, crept upward. it became harder to attain next percentage of improvement. Therefore other innovative technologies are required. By the technologies applied to the fossil power plants, equipment health monitoring was performed on equipment to maintain it in operable condition and contributed on improving their reliability a lot. But the equipment monitoring may be limited to the observation of current system states in nuclear power plant. Monitoring of current system states is being augmented with prediction of future operating states and predictive diagnosis of future failure states. Such predictive diagnosis is motivated by the need for nuclear power plants to optimize equipment performance and reduce costs and unscheduled downtime. This paper reviews the application of techniques that focus on improving reliability in nuclear power plant by monitoring and predicting equipment health and suggests how possible to support on-line monitoring

Diagnosis and improvement proposals for the Ezeiza Atomic Center quality management system by carrying out the third laboratories workshop

International Nuclear Information System (INIS)

Eliosoff, Nilda M.

2003-01-01

By the end of 2001 the management of the Ezeiza Atomic Center (EAC) under the National Atomic Energy Commission of Argentina, stated the necessity of carrying out a survey of its laboratories. The purpose of this survey was to get information that would allow to assess the quality of the laboratories and the services they perform, including the degree of implementation of the management systems. In order to comply with this purpose fourteen EAC's laboratories were studied. The information obtained was related to the staff, their training, the kind of tasks they perform as services or as research and development, the customers, the amount of invoicing, the premises, the equipment and the adapting and implementation of the quality management system. With the results obtained from the survey a report was issued. Economic, Financial, Commercial and Human Resources workshops as well as Technical Aspects and Quality Management workshops were organized. These workshops were to go deep into the analysis of the information obtained and to generate improvement proposals of the different subjects. (author)

Academic excellence workshops in chemistry and physics

Science.gov (United States)

Mills, Susan Rose

In the mid-1970's, Uri Treisman, at the University of California, Berkeley, developed an academic excellence workshop program that had important successes in increasing minority student achievement and persistence in calculus. The present dissertation research is an in-depth study of chemistry and physics workshops at the California State Polytechnic University, Pomona. Data for the first, longitudinal component of this study were obtained by tracking to Spring 1998 all workshop minority students, i.e., Latino, African American, and Native American workshop students, a random sample of non-workshop minority students, and a random sample of non-targeted students, i.e., Anglo and Asian students, enrolled in first-quarter General Chemistry or Physics during specific quarters of 1992 or 1993. Data for the second component were obtained by administering questionnaires, conducting interviews, and observing science students during Fall, 1996. Workshop participation was a significant predictor of first-quarter course grade for minority students in both chemistry and physics, while verbal and mathematics Scholastic Aptitude Test (SAT) scores were not significant predictors of beginning course grade for minority science students. The lack of predictive ability of the SAT and the importance of workshop participation in minority students' beginning science course performance are results with important implications for educators and students. In comparing pre-college achievement measures for workshop and non-targeted students, non-targeted students' mathematics SAT scores were significantly higher than chemistry and physics workshop students' scores. Nonetheless, workshop participation "leveled the field" as workshop and non-targeted students performed similarly in beginning science courses. Positive impacts of workshop participation on achievement, persistence, efficiency, social integration, and self-confidence support the continued and expanded funding of workshop programs

2016 FACET-II Science Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark J., ed.

2017-07-19

The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

Equipment for data transmission from scintillation detectors and motion scintiaraph to multichannel analyzer or computer

International Nuclear Information System (INIS)

Runczik, I.; Cernoch, V.

1981-01-01

The patent is claimed for the connection of the equipment. By its positional output the data selection circuit is connected to the input of a program counter and by its time output to the input of a time analyzer. A pulse tape recorder is connected to the input of the selection circuit. The equipment may be used off-line and on-line. In the on-line mode the data are fed directly to the selection circuit, in the off-line mode they are recorded on a tape of the pulse tape recorder and then fed to the selection data circuit. The selection data circuit classifies data into time and positional depending on the type of information. Control circuits increase the reliability of data transmission. (J.P.)

Iterative Prototyping of Strategy Implementation Workshop Design

DEFF Research Database (Denmark)

Kryger, Anders

2018-01-01

Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

Li'l Red Schoolhouse workshops

Science.gov (United States)

1993-01-01

Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

DESY: QCD workshop

International Nuclear Information System (INIS)

Ingelman, Gunnar

1994-01-01

The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

Physics and Astronomy New Faculty Workshops: 20 Years of Workshops and 2000 Faculty

Science.gov (United States)

Hilborn, Robert

Most college and university new faculty members start their teaching careers with almost no formal training in pedagogy. To address this issue, the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society have been offering since 1996 workshops for physics and astronomy new faculty members (and in recent years for experienced faculty members as well). The workshops introduce faculty members to a variety of interactive engagement teaching (IET) methods and the evidence for their effectiveness, embedded in a framework of general professional development. Currently the workshops engage about 50% of the new tenure-track hires in physics and astronomy. The workshops are quite successful in making the participants aware of IET methods and motivating them to implement them in their classes. However, about 1/3 of the participants stop using IET methods within a year or two. The faculty members cite (a) lack of time and energy to change, (b) content coverage concerns, and (c) difficulty getting students engaged as reasons for their discontinuance. To help overcome these barriers, we have introduced faculty online learning communities (FOLCs). The FOLCs provide peer support and advice through webinars and coaching from more experienced faculty members. Recommendations based on the workshops and the experiences of the participants can enhance the teaching effectiveness of future physics and astronomy faculty members. This work was supported in part by NSF Grant 1431638.

Establishing Ozone Critical Levels II. UNECE Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

2003-06-01

This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

75 FR 28051 - Public Workshop: Pieces of Privacy

Science.gov (United States)

2010-05-19

... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be...

Data acquisition, remote control and equipment monitoring for ISOLDE RILIS

Energy Technology Data Exchange (ETDEWEB)

Rossel, R.E., E-mail: ralf.erik.rossel@cern.ch [CERN, Geneva (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany); Hochschule RheinMain, Fachbereich Design Informatik Medien, Wiesbaden (Germany); Fedosseev, V.N.; Marsh, B.A. [CERN, Geneva (Switzerland); Richter, D. [Hochschule RheinMain, Fachbereich Design Informatik Medien, Wiesbaden (Germany); Rothe, S. [CERN, Geneva (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany); Wendt, K.D.A. [Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany)

2013-12-15

Highlights: • The requirements for continuous and automated RILIS operation are outlined. • Laser wavelength, power, beam position and pulse timing are continuously monitored. • A network-extended LabVIEW-based equipment operation framework was developed. • The system serves as a foundation for collaborative laser spectroscopy data acquisition. • Example applications have been successfully tested with ISOLDE experiment setups. -- Abstract: With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation of new pump lasers, commercial dye lasers and a complementary, fully solid-state titanium:sapphire laser system. The framework of the upgrade also required the setup of a network-extended, LabVIEW-based system for data acquisition, remote control and equipment monitoring, to support RILIS operators as well as ISOLDE users. The system contributes to four key aspects of RILIS operation: equipment monitoring, machine protection, automated self-reliance, and collaborative data acquisition. The overall concept, technologies used, implementation status and recent applications during the 2012 on-line operation period will be presented along with a summary of future developments.

On line ultrasonic integrated backscatter

International Nuclear Information System (INIS)

Landini, L.; Picano, E.; Mazzarisi, A.; Santarelli, F.; Benassi, A.; De Pieri, G.

1988-01-01

A new equipment for on-line evaluation of index based on two-dimensional integrated backscatter from ultrasonic images is described. The new equipment is fully integrated into a B-mode ultrasonic apparatus which provides a simultaneous display of conventional information together with parameters of tissue characterization. The system has been tested with a backscattering model of microbubbles in polysaccharide solution, characterized by a physiological exponential time decay. An exponential fitting to the experimental data was performed which yielded r=0.95

ATLAS TRT 2002 Workshop

CERN Multimedia

Capeans, M.

Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

Management of Transportation Equipment.

Science.gov (United States)

1982-11-01

Record% % %. "jP -M -. M LIh TRANSPORTATION MAENTKENAI4CE SHOP WORKLOAD CONTROL WORK CENTER SADR A-OR .a’* tLR 4.,R53 8114LM 0 o 251 50 75 100 125 ISO ...PDBP 06 7 4892 TRACTOR, WHEEL, INDUST, 14001-20000 PDBP 06 7 4893 TRACTOR, WHEEL, INDUST, 20001-27000 PDBP 06 7 4894 TRACTOR, WHEEL, INDUST, 27001 PDBP...27K TRACTOR, WHEEL, INDUST, 27001 PDBP & UP P-i LINE ITEM 07 LIGHTING AND POWER GENERATION EQUIPMENT 5110 T FLOODLIGHT ELEC FLOODLIGHT, ELEC, TRUCK

Measurement Control Workshop Instructional Materials

International Nuclear Information System (INIS)

Gibbs, Philip; Crawford, Cary; McGinnis, Brent

2014-01-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Measurement control workshop instructional materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

2014-04-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Presentations from the Second ORION Workshop, Stanford Linear Accelerator Center, February 18-20, 2003

International Nuclear Information System (INIS)

Noble, Robert

2003-01-01

ORION will be a dedicated user facility available for experimental research in plasma and laser acceleration of particles, beam-plasma physics, ultra-short pulse electron and radiation sources, and potentially laboratory astrophysics. It will bring together a diverse collection of researchers motivated to solve some of the most complex and fascinating problems in these fields. The ORION Facility will be based on the Next Linear Collider Test Accelerator (NLCTA), an existing accelerator at SLAC capable of producing 60 to 350 MeV electron beams. The NLCTA will be augmented with a new photo-injector source, two experimental halls, extraction beamlines, a user laser room, and a data acquisition area. Facility construction is anticipated to start in October 2003, and first beam for experiments is planned for 2005. A central goal of ORION is to provide a facility responsive to the research needs of its users. The workshop's purpose is to explore the range of experiments envisioned by potential users and review the types of beams available and the desired beam parameters. This workshop is an opportunity for the research community to provide input on the facility's test beams, layout, shared diagnostic equipment, simulation and computing capabilities, and user support infrastructure. Results from the workshop will go into determining the facility's design as well as help the SLAC management plan for future user needs on the site once operations begin

A study on establishing export system of nuclear related equipments to the IAEA

Energy Technology Data Exchange (ETDEWEB)

Song, Ki Dong; Lee, Man Ki; Moon, Ki Hwan; Kim, Seung Soo; Lim, Chae Young; Kim, Hwa Sup; Min, Tae Sik [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-04-01

In spite of the advanced status in the international nuclear society, exports of domestic nuclear industries to procurement market of the international organizations has been negligible. This study briefly explained the role and the structure of the IAEA. Then, this study surveyed the size of procurement market, major procurement items, and procurement process. This study also gave an export example to the IAEA from Korea Atomic Energy Research Institute for the ease of understanding the procurement process. Based on these surveys and analysis, this study established the goal and strategy for exports of nuclear equipments to the IAEA. Besides, this study surveyed domestic nuclear industries that have potential to export their products to the IAEA. Then, Korea Atomic Energy Research Institute, by a cooperation with Korea Atomic Industrial Forum Inc., held workshop on 'export of nuclear equipments to IAEA' in May 2001 for them. 4 refs., 1 fig., 10 tabs. (Author)

Indonesian students' participation in an interprofessional learning workshop.

Science.gov (United States)

Ernawati, Desak Ketut; Lee, Ya Ping; Hughes, Jeffery

2015-01-01

Interprofessional learning activities, such as workshops allow students to learn from, with and about each other. This study assessed the impact on Indonesian health students' attitudes towards interprofessional education (IPE) from participating in a workshop on medication safety. The students attended a two-day IPE workshop on medication safety. Thirty-five (48.6%) students completed pre-/post-workshop surveys using a modified Readiness for Interprofessional Learning Scale (RIPLS) survey. The post-workshop survey also had a series of open-ended questions. Students' responses to each RIPLS statement pre-/post-workshop were compared, whilst their responses to open-ended questions in post-workshop survey were thematically analysed. Students reported positive attitudinal changes on statements of shared learning and teamwork sub-scale (Wilcoxon p value importance of teamwork and communication skills. This study found that learning with other health students through an IPE workshop improved medical, nursing and pharmacy students' attitudes towards the importance of shared learning, teamwork and communication in healthcare service.

TPC workshop summary

International Nuclear Information System (INIS)

Nygren, D.R.

1984-01-01

The Time Projection Chamber (TPC) concept is now nearly ten years old and, as is evident in this workshop, is still evolving in many directions. From the liquid xenon TPC for double beta decay studies to the impressively large second generation TPC for the LEP experiment ALEPH, the surprising diversity of current applications is apparent. This workshop, the first to concentrate solely on the TPC has provided a most congenial and rewarding occasion for all TPC enthusiasts to share experience, results, and ideas

t4 Workshop Report*

Science.gov (United States)

Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

2014-01-01

Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042

Workshop proceedings: "We are the Olifants" - Key stakeholder workshop for the Upper Olifants River study

CSIR Research Space (South Africa)

Funke, Nicola S

2013-03-31

Full Text Available Project Leader, Natural Resources and the Environment Council for Scientific and Industrial Research March 2013 Workshop Proceedings Page v EXECUTIVE SUMMARY The Upper Olifants Key Stakeholder Workshop took place at the CSIR Knowledge...

Proceedings of the Inheritance Workshop at ECOOP 2002

DEFF Research Database (Denmark)

2002-01-01

The Inheritance Workshop at ECOOP 2002, which took place on Tuesday, 11 June, was the first ECOOP workshop focusing on inheritance after the successful workshops in 1991 and 1992. The workshop was intended as a forum for designers and implementers of object-oriented languages, and for software de...

Sheltered Workshops and Transition: Old Bottles, New Wine?

Science.gov (United States)

Coombe, Edmund

This paper provides a historical overview of sheltered workshops and presents information about service innovations and mission expansion. The first workshop in the United States was the Perkins Institute, opened in 1837 for individuals with visual handicaps. This workshop was typical of "categorical" workshops that were established during this…

The ATLAS Electromagnetic Calorimeter Calibration Workshop

CERN Multimedia

Hong Ma; Isabelle Wingerter

The ATLAS Electromagnetic Calorimeter Calibration Workshop took place at LAPP-Annecy from the 1st to the 3rd of October; 45 people attended the workshop. A detailed program was setup before the workshop. The agenda was organised around very focused presentations where questions were raised to allow arguments to be exchanged and answers to be proposed. The main topics were: Electronics calibration Handling of problematic channels Cluster level corrections for electrons and photons Absolute energy scale Streams for calibration samples Calibration constants processing Learning from commissioning Forty-five people attended the workshop. The workshop was on the whole lively and fruitful. Based on years of experience with test beam analysis and Monte Carlo simulation, and the recent operation of the detector in the commissioning, the methods to calibrate the electromagnetic calorimeter are well known. Some of the procedures are being exercised in the commisssioning, which have demonstrated the c...

Design of EPON far-end equipment based on FTTH

Science.gov (United States)

Feng, Xiancheng; Yun, Xiang

2008-12-01

Now, most favors fiber access is mainly the EPON fiber access system. Inheriting from the low cost of Ethernet, usability and bandwidth of optical network, EPON technology is one of the best technologies in fiber access and is adopted by the carriers all over the world widely. According to the scheme analysis to FTTH fan-end equipment, hardware design of ONU is proposed in this paper. The FTTH far-end equipment software design deference modulation design concept, it divides the software designment into 5 function modules: the module of low-layer driver, the module of system management, the module of master/slave communication, and the module of main/Standby switch and the module of command line. The software flow of the host computer is also analyzed. Finally, test is made for Ethernet service performance of FTTH far-end equipment, E1 service performance and the optical path protection switching, and so on. The results of test indicates that all the items are accordance with technical request of far-end ONU equipment and possess good quality and fully reach the requirement of telecommunication level equipment. The far-end equipment of FTTH divides into several parts based on the function: the control module, the exchange module, the UNI interface module, the ONU module, the EPON interface module, the network management debugging module, the voice processing module, the circuit simulation module, the CATV module. In the downstream direction, under the protect condition, we design 2 optical modules. The system can set one group optical module working and another group optical module closure when it is initialized. When the optical fiber line is cut off, the LOS warning comes out. It will cause MUX to replace another group optical module, simultaneously will reset module 3701/3711 and will make it again test the distance, and will give the plug board MPC850 report through the GPIO port. During normal mode, the downstream optical signal is transformed into the

Summary of the PSI workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

8th International Workshop on Simulation

CERN Document Server

Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

2018-01-01

This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

Images of Conflict: Learning from Media Coverage of the Persian Gulf War. A Media Literacy Workshop Kit.

Science.gov (United States)

Osborn, Barbara; Davis, J. Francis

This workshop kit consists of: (1) 30-page "Leaders Guide and Handout Masters"; (2) 12-minute videotape, "Lines in the Sand"; (3) special 24-page issue of the journal "Media & Values" on the theme "The Media: in War and Peace"; and (4) an 8-page booklet on the basics of media literacy, "From…

English as a Second Language for Automotive Component Parts Line Operators.

Science.gov (United States)

Lewandowski, Carol

This document is one of a series of student workbooks developed for workplace skill development courses or workshops by Mercer County Community College (New Jersey) and its partners. Designed to improve the English speaking and reading skills of non-English-speaking automotive component parts line operators, the course covers oral, written,…

Program of telluric lines monitoring

Directory of Open Access Journals (Sweden)

Vince I.

2006-01-01

Full Text Available A new observational program of telluric lines monitoring was introduced at Belgrade Astronomical Observatory. The ultimate goal of this program is to investigate the properties of Earth’s atmosphere through modeling the observed profiles of telluric lines. The program is intend to observe infrared molecular oxygen lines that were selected according to spectral sensitivity of the available CCD camera. In this paper we give the initial and the final selection criteria for spectral lines included in the program the description of equipment and procedures used for observations and reduction, a review of preliminary observational results with the estimated precision, and a short discussion on the comparison of the theoretical predictions and the measurements.

A characteristic of design solutions for flask moulding lines

OpenAIRE

Fedoryszyn, A.

2007-01-01

Moulding machines used in manufacture of moulds from synthetic bentonite sands constitute basic equipment of mechanised stands, work centres, and production lines. In the present article, a short characteristic of this equipment was given, basing on the generally accepted criteria of classification taking into consideration novel design solutions and principles of cooperation between individual sub-assemblies. Moulding equipment offered by domestic producers was described with emphasis put on...

REPORT OF ON-SITE INSPECTION WORKSHOP-16

Energy Technology Data Exchange (ETDEWEB)

Sweeney, J J

2009-07-07

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities for the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative

Workshop Polli Talu Loomingulises Keskuses

Index Scriptorium Estoniae

2004-01-01

MAP Intermedia Performance Collaboration'i (USA) workshop. Brendan McCall (liikumine), N. B. Aldrich (heli) ja Zach Poff (video) workshop tutvustab kolme kunstniku koostööd. Näidatakse ka multimeedia etendust, mis on külaliskunstnikel valminud Polli talus

IFPA meeting 2009 workshops report

DEFF Research Database (Denmark)

Lash, G.E.; Burton, G.J.; Chamley, L.W.

2010-01-01

Workshops are an important part of the annual meeting of the International Federation of Placenta Associations (IFPA). At IFPA Meeting 2009 diverse topics were discussed in twelve themed workshops. Topics covered included: immune response to pregnancy; signaling between fetus and placenta...

Underground coal mining - methods, equipment developments and trends

Energy Technology Data Exchange (ETDEWEB)

Singhal, R

1988-12-01

Underground mines are truly beginning to accept the so-called 'high tech' technology evident in other industries. Automation, remote control and robotics have taken an added significance. Wireless communication, mine-wide equipment health and performance monitoring, and transmission of data from deeper levels to surface is moving towards becoming the norm. There is emphasis on developing and applying continuous mining systems, as well as on modifying cyclical discontinuous methods to continuous systems. Multi-purpose equipment is also being developed. Technology transfer is playing its role - equipment and systems from surface coal mining are being applied to underground mining and vice-versa. At the American Mining Congress Exhibition held in Chicago in April 1988, a variety of equipment for underground mining was displayed including coal face equipment such as shearer loaders, conveyors and powered supports, and equipment for room-and-pillar coal mining. The trend continues to be towards high power machines equipped with a variety of electronics and sensors, safety devices, and alarm systems. Ancillary equipment on display covered a variety of cutting drums, cutting tools, conveying equipment and so on. In room-and-pillar mining, the overall emphasis was on moving away from the cyclical nature of the work. Transportation by shuttle cars must be replaced by continuous transport systems such as conveyors. Experience from Australia has shown that the application of continuous haulage and breaker line supports has permitted a doubling of production from room-and-pillar systems. Production levels of 3,000tpd have already been achieved, and 4,000tpd is considered achievable.

Final Scientific EFNUDAT Workshop

CERN Multimedia

CERN. Geneva

2010-01-01

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

Electromagnetic compatibility for the control and command equipments in nuclear power plants

International Nuclear Information System (INIS)

Buisson, J.

1985-06-01

Different kinds of electrical interference produce some disturbance on electronic sub-assemblies used to assume the control and the command of nuclear reactors. Following interferences are described: power supply lines perturbations, potential difference between grounding connections, electromagnetic fields. A method is described for testing the EMC of different equipments. The advantages of this method are: no destructive method, usable for testing equipment ''in situ'' in operating conditions on nuclear power plant, usable for testing equipment before operating conditions (acceptance test), level of the testing signals similar to the electrical interference level induced by the electromagnetic environment in normal operating conditions, no particular equipment and installation for test are required [fr

Atomic physics at the Advanced Photon Source: Workshop report

International Nuclear Information System (INIS)

1990-10-01

The first Workshop on Atomic Physics at the Advanced Photon Source was held at Argonne National Laboratory on March 29--30, 1990. The unprecedented brightness of the Advanced Photon Source (APS) in the hard X-ray region is expected to make possible a vast array of new research opportunities for the atomic-physics community. Starting with discussions of the history and current status of the field, presentations were made on various future directions for research with hard X-rays interacting with atoms, ions, clusters, and solids. Also important were the discussions on the design and status of the four next-generation rings coming on line during the 1990's: the ALS 1.6 GeV ring at Berkeley; the ESRF 6.0-GeV ring at Grenoble (1993); the APS 7.0-GeV ring at Argonne (1995); and the SPring-8 8.0-GeV ring in Japan (1998). The participation of more than one hundred scientists from domestic as well as foreign institutions demonstrated a strong interest in this field. We plan to organize follow-up workshops in the future emphasizing specific research topics

Diagnostic Imaging Workshop

International Nuclear Information System (INIS)

Sociedad Argentina de Fisica Medica

2012-01-01

The American Association of Physicist in Medicine (AAPM), the International Organization for Medical Physics (IOMP) and the Argentina Society of Medical Physics (SAFIM) was organized the Diagnostic Imaging Workshop 2012, in the city of Buenos Aires, Argentina. This workshop was an oriented training and scientific exchange between professionals and technicians who work in medical physics, especially in the areas of diagnostic imaging, nuclear medicine and radiotherapy, with special emphasis on the use of multimodal imaging for radiation treatment, planning as well of quality assurance associates.

Collider workshop

International Nuclear Information System (INIS)

Anon.

1982-01-01

The promise of initial results after the start of operations at CERN's SPS proton-antiproton collider and the prospects for high energy hadron collisions at Fermilab (Tevatron) and Brookhaven (ISABELLE) provided a timely impetus for the recent Topical Workshop on Forward Collider Physics', held at Madison, Wisconsin, from 10-12 December. It became the second such workshop to be held, the first having been in 1979 at the College de France, Paris. The 100 or so participants had the chance to hear preliminary results from the UA1, UA4 and UA5 experiments at the CERN SPS collider, together with other new data, including that from proton-antiproton runs at the CERN Intersecting Storage Rings

A Workshop in Transcultural Nursing.

Science.gov (United States)

Stevenson, Thomas B.

1986-01-01

Describes an experimental, week-long interdisciplinary (i.e., nursing and anthropology) workshop on the relationship between health and culture conducted by Ohio University, Zanesville, in conjunction with the University of Toronto. Discusses program formulation, objectives, results, and suggestions for future workshops. (LAL)

IFPA meeting 2008 workshops report

DEFF Research Database (Denmark)

Lash, G.E.; Ansari, T.; Bischof, P.

2009-01-01

Workshops are an important part of the IFPA annual meeting. At the IFPA meeting 2008 diverse topics were discussed in 12 themed workshops. Topics covered included: immunology of placentation; galectins and trophoblast invasion; signaling in implantation and invasion; markers to identify trophoblast...

Presentation Skills Workshops for Nurses.

Science.gov (United States)

Kinn, S.; Kenyon, M.

2002-01-01

Workshops were held to prepare nurses (n=87) to present results of professional activities. One year after the course, 20 had made oral and 30 written presentations. The workshops increased their confidence and were considered practical, informal, and nonthreatening. (Contains 31 references.) (SK)

Summary of experimental insertions workshop

International Nuclear Information System (INIS)

Sandweiss, J.; Month, M.

1976-01-01

An ISABELLE workshop of the summer 1976 series, which was held at Brookhaven August 16--20, focused on the design and utilization of the experimental insertions. The goals of the workshop are outlined, and a few general remarks about the results are presented

Action research Toolkit II: The Scenario Workshop

DEFF Research Database (Denmark)

Rasmussen, Lauge Baungaard

2003-01-01

The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice.......The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice....

International Workshop on Diagnostics for ITER

CERN Document Server

Gorini, Giuseppe; Sindoni, Elio

1996-01-01

This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1...

Workshop on Developing Safe Software

International Nuclear Information System (INIS)

Lawrence, J.D.

1994-11-01

The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

Workshop on developing safe software

International Nuclear Information System (INIS)

Lawrence, J.D.

1992-01-01

The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

Synchronization of workshops, using facilities planning

Science.gov (United States)

Zineb, Britel; Abdelghani, Cherkaoui

2017-08-01

In this paper, we will present a methodology used for the synchronization of two workshops of a sheet metal department. These two workshops have a supplier-customer relationship. The aim of the study is to synchronise the two workshops as a step towards creating a better material flow, reduced inventory and achieving Just in time and lean production. To achieve this, we used a different set of techniques: SMED, Facilities planning…

Nuclear Energy Innovation Workshops. Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

Equipment for welding of details and joints of plastic pipes in work shop conditions and at pipelines

International Nuclear Information System (INIS)

Doronin, V.A.

1988-01-01

A range of welding machines for operation in workshop conditions and at pipelines is presented. Set of welding equipment for mobile shop, producing prototypes, and mobile facility are developed. In 1989 they will provide the whole operation cycle of production and mounting of details and units of plastic tubes and will enable to organize the centralized production of welded and shaped details in the branch, thus excluding the shortage of these details. 8 refs.; 6 figs.; 2 tabs

International workshop on multimodal analyses enabling artificial agents in human-machine interaction (workshop summary)

NARCIS (Netherlands)

Böck, Ronald; Bonin, Francesca; Campbell, Nick; Poppe, R.W.

2016-01-01

In this paper a brief overview of the third workshop on Multimodal Analyses enabling Artificial Agents in Human-Machine Interaction. The paper is focussing on the main aspects intended to be discussed in the workshop reflecting the main scope of the papers presented during the meeting. The MA3HMI

47 CFR 36.125 - Local switching equipment-Category 3.

Science.gov (United States)

2010-10-01

... electronic analog or digital remote line locations. Equipment used for the identification, recording and... which has a common intermediate distributing frame, market group or other separately identifiable... composed of an electronic analog or digital host office and all of its remote locations. A host/remote...

Regulatory issues associated with closure of the Hanford AX Tank Farm ancillary equipment

International Nuclear Information System (INIS)

Becker, D.L.

1998-01-01

Liquid mixed, high-level radioactive waste has been stored in underground single-shell tanks at the US Department of Energy's (DOE's) Hanford Site. After retrieval of the waste from the single-shell tanks, the DOE will proceed with closure of the tank farm. The 241-AX Tank Farm includes four one-million gallon single-shell tanks in addition to sluice lines, transfer lines, ventilation headers, risers, pits, cribs, catch tanks, buildings, well and associated buried piping. This equipment is classified as ancillary equipment. This document addresses the requirements for regulatory close of the ancillary equipment in the Hanford Site 241-AX Tank Farm. The options identified for physical closure of the ancillary equipment include disposal in place, disposal in place after treatment, excavation and disposal on site in an empty single-shell tank, and excavation and disposal outside the AX Tank Farm. The document addresses the background of the Hanford Site and ancillary equipment in the AX Tank Farm, regulations for decontamination and decommissioning of radioactively contaminated equipment, requirements for the cleanup and disposal of radioactive wastes, cleanup and disposal requirements governing hazardous and mixed waste, and regulatory requirements and issues associated with each of the four physical closure options. This investigation was conducted by the Sandia National Laboratories, Albuquerque, New Mexico, during Fiscal Year 1998 for the Hanford Tanks Initiative Project

New version of VDE 0118 Installation of electrical equipment in underground mining

Energy Technology Data Exchange (ETDEWEB)

Gebhardt, L

1981-10-22

Preparatory work for the new version of VDE 0188 is reviewed. The major modifications in parts 1 and 2 are mentioned in particular the changes in operating conditions which have been considered and the modified definitions of clean rooms, earthing, underground protective wire system, and mobile operating equipment. Part 2 discusses operating equipment such as motors, inductive voltage transformers, transformers, condensers, lines, lighting units and underground short circuit protection. Part 3 - intrinsically safe electrical equipment, auxiliary circuits, telecommunication systems - will be discussed in a sequel article in Glueckauf.

AAAI Workshop on Nonmonotonic Reasoning

OpenAIRE

Etherington, David

1985-01-01

On October 17-19 1984 a workshop on non-monotonic reasoning was held at Mohonk Mountain House, outside New Paltz, New York. The workshop was organized by Raymond Reiter and Bonnie Webber, and was sponsored by the Association for the Advancement of Artificial Intelligence.

Zirconium Recycle Test Equipment for Hot Cell Operations

International Nuclear Information System (INIS)

Collins, Emory D.; DelCul, Guillermo Daniel; Spencer, Barry B.; Bradley, Eric Craig; Brunson, Ronald Ray

2015-01-01

The equipment components and assembly support work were modified for optimized, remote hot cell operations to complete this milestone. The modifications include installation of a charging door, Swagelok connector for the off-gas line between the reactor and condenser, and slide valve installation to permit attachment/replacement of the product salt collector bottle.

Pressurized water reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 reactor department simulator from the Moscow Engineering and Physics Institute, the Russian Federation is presented in the IAEA Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a boiling water reactor simulator developed for the IAEA by Cassiopeia Technologies Incorporated of Canada (CTI) is presented in the IAEA publication: Training Course Series No.23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using a pressurized water reactor simulator

Report on the final BRACElet workshop

Directory of Open Access Journals (Sweden)

Tony Clear

Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter VI: maintainability

International Nuclear Information System (INIS)

Tomabechi, Ken; Iida, Hiromasa; Honda, Tsutomu

1985-07-01

This report corresponds to Chapter VI of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. In this report, we have compared two different reactor concepts, one is based on the personnel access concept where the personnel access is possible to the outside of the torus for maintenance one day after shutdown and the other where the personnel access is not necessary and maintenance is performed in full-remote manner. The results are described from various view points such as reactor configuration, tritium confinement, safety, shielding, maintenance scenario and cost. Data base assessments of maintenance equipment are also reported. (author)

Future trends in metal forming—equipment, materials and processes in automotive applications

Science.gov (United States)

Hitz, D.; Duggirala, R.

1995-10-01

Global competition in the automotive market has made a significant impact in the materials, processes, tools, and equipment used to make components. Steels are being replaced by other materials, such as aluminum, composites, and plastics, that meet the demand for a higher performance per weight ratio. From a processing viewpoint, the customers demand production of parts to near-net shape with little or no machining. Competition in business depends on understanding the needs of the customer in the coming years in the area of metal forming. A workshop was conducted using a novel approach to address the above issue. This presentation describes the approach and the results of the study.

Building Strong Geoscience Departments Through the Visiting Workshop Program

Science.gov (United States)

Ormand, C. J.; Manduca, C. A.; Macdonald, H.; Bralower, T. J.; Clemens-Knott, D.; Doser, D. I.; Feiss, P. G.; Rhodes, D. D.; Richardson, R. M.; Savina, M. E.

2011-12-01

The Building Strong Geoscience Departments project focuses on helping geoscience departments adapt and prosper in a changing and challenging environment. From 2005-2009, the project offered workshop programs on topics such as student recruitment, program assessment, preparing students for the workforce, and strengthening geoscience programs. Participants shared their departments' challenges and successes. Building on best practices and most promising strategies from these workshops and on workshop leaders' experiences, from 2009-2011 the project ran a visiting workshop program, bringing workshops to 18 individual departments. Two major strengths of the visiting workshop format are that it engages the entire department in the program, fostering a sense of shared ownership and vision, and that it focuses on each department's unique situation. Departments applied to have a visiting workshop, and the process was highly competitive. Selected departments chose from a list of topics developed through the prior workshops: curriculum and program design, program elements beyond the curriculum, recruiting students, preparing students for the workforce, and program assessment. Two of our workshop leaders worked with each department to customize and deliver the 1-2 day programs on campus. Each workshop incorporated exercises to facilitate active departmental discussions, presentations incorporating concrete examples drawn from the leaders' experience and from the collective experiences of the geoscience community, and action planning to scaffold implementation. All workshops also incorporated information on building departmental consensus and assessing departmental efforts. The Building Strong Geoscience Departments website complements the workshops with extensive examples from the geoscience community. Of the 201 participants in the visiting workshop program, 140 completed an end of workshop evaluation survey with an overall satisfaction rating of 8.8 out of a possible 10

Report on the second international workshop on residential radon: Workshop proceedings

International Nuclear Information System (INIS)

1991-07-01

As a follow-on to the first International Workshop on Residential Radon Epidemiology held in Alexandria VA, on July 24-26, 1989, a Second Workshop was convened, in Alexandria, VA, July 22-23 1991, also under the auspices of the US Department of Energy and the Commission of European Communities. The Workshop, co-chaired by Jonathan Samet and Jan Stolwijk, was attended by 20 active participants from seven countries representing epidemiologic studies recently completed, currently in progress, or in the last stages of preparation. The studies reported on are being conducted in the United States, Canada, Sweden, the United Kingdom, France, Belgium, Germany and the Peoples' Republic of China. The invited presentations that initiated the Workshop focused on a number of methodological problems that have surfaced in the last few years. Among these were: (1) the difficulties in predicting indoor radon concentrations, based on geologic information, (discussed by Alan Tanner, formerly of the US Geologic Survey); (2) the relationships between indoor radon concentrations and building characteristics (discussed by Richard Sextro, Lawrence Berkeley Laboratory, USA); (3) the approaches to analysis of case-control studies in radon epidemiology (discussed by Sarah Darby, Imperial Cancer Research Fund, UK); (4) statistical approaches to error in measurements and missing data (discussed by Donna Spiegelman, Tufts University, USA); (5) preliminary results of a data pooling effort dealing with several different studies of residential radon epidemiology and the lessons to be drawn from this effort (discussed by Jay Lubin, US National Cancer Institute)

Physics Analysis Tools Workshop 2007

CERN Multimedia

Elizabeth Gallas,

The ATLAS PAT (Physics Analysis Tools) group evaluates, develops and tests software tools for the analysis of physics data, consistent with the ATLAS analysis and event data models. Following on from earlier PAT workshops in London (2004), Tucson (2005) and Tokyo (2006), this year's workshop was hosted by the University of Bergen in Norway on April 23-28 with more than 60 participants. The workshop brought together PAT developers and users to discuss the available tools with an emphasis on preparing for data taking. At the start of the week, workshop participants, laptops and power converters in-hand, jumped headfirst into tutorials, learning how to become trigger-aware and how to use grid computing resources via the distributed analysis tools Panda and Ganga. The well organised tutorials were well attended and soon the network was humming, providing rapid results to the users and ample feedback to the developers. A mid-week break was provided by a relaxing and enjoyable cruise through the majestic Norwegia...

2nd Ralf Yorque Workshop

CERN Document Server

1985-01-01

These are the proceedings of the Second R. Yorque Workshop on Resource Management which took place in Ashland, Oregon on July 23-25, 1984. The purpose of the workshop is to provide an informal atmosphere for the discussion of resource assessment and management problems. Each participant presented a one hour morning talk; afternoons were reserved for informal chatting. The workshop was successful in stimulating ideas and interaction. The papers by R. Deriso, R. Hilborn and C. Walters all address the same basic issue, so they are lumped together. Other than that, the order to the papers in this volume was determined in the same fashion as the order of speakers during the workshop -- by random draw. Marc Mangel Department of Mathematics University of California Davis, California June 1985 TABLE OF CONTENTS A General Theory for Fishery Modeling Jon Schnute Data Transformations in Regression Analysis with Applications to Stock-Recruitment Relationships David Ruppert and Raymond J. Carroll ••••••. •�...

Application of superconductors to motors, generators, and transmission lines

International Nuclear Information System (INIS)

Kirtley, J.L.

1989-01-01

Superconductors are of interest to the designers of electric power equipment because they can carry current without loss, currents that are large enough to make very intense magnetic fields. This means that superconductors, used in suitable applications, can make electric power equipment smaller, lighter, more efficient, and perhaps with better dynamic response. Two specific applications are considered here: electric machinery (motors and generators) and transmission lines. The so-called high-T c superconductors will have beneficial impact on motors, generators, and transmission lines only if conductors with sufficient mechanical properties and current-carrying capabilities can be developed

Proceedings of the Government Users Workshop on Ground Penetrating Radar Applications and Equipment 26-27 March 1992 Vicksburg, Mississippi

Science.gov (United States)

1992-12-01

Allison P.O. Box 946 USDA Tifton , GA 31794 Box 946 Phone: 912-386-3899 Tifton , GA 31794 FAX: 912-386-7215 Phone: 912-386-7075 FAX: 912-386-7215 Paul...FAX: 603-889-3984 FAX: 071-724-1433 Ricky Fletcher S. V. Cosvay USDA-ARS-SEWRL Sensors and Software, Inc. Rt. 4, Box 1390 5566 Tomken Road Tifton , GA ... Tifton , GA 31793 Phone: 305-634-4507 Phone: 912-386-7174 FAX: 305-635-4901 FAX: 912-386-7215 8 GOVERNMENT USERS WORKSHOP ON GROUND PENETRATING RADAR

High Resolution Infrared Spectroscopy in Astronomy Proceedings of an ESO Workshop Held at Garching, Germany, 18-21 November 2003

CERN Document Server

Käufl, Hans Ulrich; Moorwood, Alan F. M

2005-01-01

Two specialized new instruments for ESO's VLT, VISIR and CRIRES, spawned the idea for this workshop. CRIRES is a dedicated very high resolution infrared spectrograph; VISIR features a high resolution spectroscopic mode. Together, the instruments combine the sensitivity of an 8m-telescope with the now well-established reliability of VLT-facility instruments. High resolution here means that lines in cool stellar atmospheres and HII-regions can be resolved. The astrophysical topics discussed in this rather specialized workshop range from the inner solar system to active galactic nuclei. There are many possibilities for new discoveries with these instruments, but the unique capability, which becomes available through high-resolution infrared spectroscopy, is the observation of molecular rotational-vibrational transitions in many astrophysical environments. Particularly interesting and surprising in this context, many papers on modeling and laboratory spectroscopy at the workshop appear to indicate that astronomic...

A study on establishing export system of nuclear related equipments to the IAEA

Energy Technology Data Exchange (ETDEWEB)

Song, Ki Dong; Lee, Man Ki; Moon, Ki Hwan; Kim, Seung Soo; Lim, Chae Young; Kim, Hwa Sup; Min, Tae Sik [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-04-01

In spite of the advanced status in the international nuclear society, exports of domestic nuclear industries to procurement market of the international organizations has been negligible. This study briefly explained the role and the structure of the IAEA. Then, this study surveyed the size of procurement market, major procurement items, and procurement process. This study also gave an export example to the IAEA from Korea Atomic Energy Research Institute for the ease of understanding the procurement process. Based on these surveys and analysis, this study established the goal and strategy for exports of nuclear equipments to the IAEA. Besides, this study surveyed domestic nuclear industries that have potential to export their products to the IAEA. Then, Korea Atomic Energy Research Institute, by a cooperation with Korea Atomic Industrial Forum Inc., held workshop on 'export of nuclear equipments to IAEA' in May 2001 for them. 4 refs., 1 fig., 10 tabs. (Author)

Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

Energy Technology Data Exchange (ETDEWEB)

Seidl, P.A.; Barnard, J.J.

2011-04-29

The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

Proceedings of TRIUMF/KEK workshop on hypernuclear physics at KAON

International Nuclear Information System (INIS)

1989-07-01

A workshop on 'Hypernuclear Physics at KAON' was held on June 17-18, 1989 at KEK. 18 participants from abroad and more than 30 domestic participants attended. Following the general reviews of pre-KAON status, active discussions of future possibilities with KAON were carried out. Fundamental questions which stimulate experimental efforts were raised and various new ambitious ideas for experimental possibilities were presented. The discussions assist design studies of the KAON beam lines and help to promote the field of KAON physics. This publication is the collection of the transparencies and memoranda of the presentations and discussions. (A.Y.)

Out Brief for the Structural Reliability Partnership Workshop

Energy Technology Data Exchange (ETDEWEB)

Boyce, Brad [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fang, Eliot [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kolski, Alyssa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zimmerman, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Furmanski, Jevan [Exxon Mobil, Annandale, NJ (United States); Ravi-Chandar, Krishnaswamy [Univ. of Texas, Austin, TX (United States)

2017-08-30

The Structural Reliability Partnership Workshop was held in Albuquerque, NM on August 29-30, 2017 and was hosted by Sandia National Laboratories. Attendees were present from academia, industry and several other national laboratories. The workshop kicked off with an introduction to the SRP to familiarize potential members with what the purpose, structure and benefits would be to their organization. Technical overviews were given on several topics by attendees from each sector – national labs, universities and industry – to provide a snapshot of the type of work that is currently being conducted on structural reliability. Attendees were then given the opportunity to suggest and discuss potential Challenge Scenario topics. Three were ultimately decided upon as being the most important: Additive Manufacturing, Hydrogen Pipeline Steels, and Bolted Joined Structures. These were then analyzed using Quad Charts to determine What, How, Who, and Why these areas would be further investigated. Rather than restricting future research to only one area, the option was left open to investigate both the top two, depending on interest and cost associated with hosting such an event. More informal collaboration may be undertaken for the third topic if members have time and interest. Other items discussed pertained to the organization, structure and policies of the Partnership. Topics including Data Management, IP, and mechanisms of partnering/information sharing were touched upon but final decisions were not made. Further action is needed before this can be done. Action items were outlined and assigned, where possible. The next workshop is to be held in early August 2018 in Boulder, CO and is to be hosted by NIST. In the interim, quarterly updates are to take place via WebEx to maintain a line of communication and to ensure progress on both the administrative and technical tasks.

Industrial Fuel Flexibility Workshop

Energy Technology Data Exchange (ETDEWEB)

none,

2006-09-01

On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

Hydrogen Technology Education Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

2002-12-01

This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new education effort coordinated by the Hydrogen, Fuel Cells, & Infrastructure Technologies Program of the Office of Energy Efficiency and Renewable Energy.

Beta Cell Workshop 2013 Kyoto

DEFF Research Database (Denmark)

Heller, R Scott; Madsen, Ole D; Nielsen, Jens Høiriis

2013-01-01

The very modern Kyoto International Conference Center provided the site for the 8th workshop on Beta cells on April 23-26, 2013. The preceding workshops were held in Boston, USA (1991); Kyoto, Japan (1994); Helsingør, Denmark (1997); Helsinki, Finland (2003); El Perello, Spain (2006); Peebles...

The ROS Workshop

CERN Multimedia

Francis, D.

The first week of February saw the taking place of the ReadOut Subsystem (ROS) workshop. The ROS is the subsystem of the Trigger, DAQ & DCS project which receives and buffers data from the detector ReadOut Drivers (RODs). On request it then provides a subset of this buffered data, the so-called Regions of Interest (RoI), to the Level 2 trigger. Using the subsequent Level 2 trigger decision, the ROS either removes the buffered event data from its buffers or sends the full event data to the Event Filter for further processing. The workshop took place over a four-day period at a location in the Jura. The average daily attendance was twenty people, which mainly represented the five main ATLAS institutes currently engaged in this Trigger, DAQ & DCS activity. The aim of the workshop was to bring to an end the current prototyping activities in this area and launch the next, final, phase of prototyping. This new phase of prototyping will build on the successful activities of the previous phase and will focus...

International Workshop on Linear Colliders 2010

CERN Multimedia

CERN. Geneva

2010-01-01

IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

Proceedings of the enlargement workshop on Neutron Measurements and Evaluations for Applications - NEMEA

International Nuclear Information System (INIS)

Plompen, A.J.M.

2004-01-01

The workshop on Neutron Measurements and Evaluation for Applications, NEMEA, was held 5-8 November 2003 in Budapest, Hungary. The objective of this workshop was to strengthen the contacts between laboratories working on nuclear data in member states of the European Union, Accession Countries joining the enlarged Union in 2004, and Candidate Countries which will join later. The workshop was organised by the Neutron Physics unit of the Institute for Reference Materials and Measurements (IRMM) together with the local organisers. The workshop included six sessions and three laboratory visits. The sessions were, in order of the agenda, Material Analysis; Data Evaluation; Safeguards, Illicit Trafficking and Demining; Biology, Medicine and Environment; Single Event Upsets; and Neutron Data for Energy Applications . In total there were thirty-seven presentations of excellent quality, illustrating the many different lines of research featuring neutron measurements and neutron data. Laboratory visits were made to the Atomki and the Institute for Experimental Physics on a one day trip from Budapest to Debrecen and to the KFKI research reactor in Budapest. Both at the Atomki and at the KFKI, laboratory visits were preceded by an excellent comprehensive overview of the facility, its history and its activities. At Debrecen, an overview was provided of the capabilities at the cyclotron laboratory in particular for neutron measurement, while at the Institute for Experimental Physics the neutron generator laboratory and the experimental setup for the demining experiments were shown. At KFKI, the participants were shown the laboratory for PGAA at the neutron beam guides of the reactor

Replacing lecture with peer-led workshops improves student learning.

Science.gov (United States)

Preszler, Ralph W

2009-01-01

Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop version of the course scored higher on exam questions recycled from preworkshop semesters. Grades were higher over three workshop semesters in comparison with the seven preworkshop semesters. Although males and females benefited from workshops, there was a larger improvement of grades and increased retention by female students; although underrepresented minority (URM) and non-URM students benefited from workshops, there was a larger improvement of grades by URM students. As well as improving student performance and retention, the addition of interactive workshops also improved the quality of student learning: Student scores on exam questions that required higher-level thinking increased from preworkshop to workshop semesters.

76 FR 58281 - Magnetic Resonance Imaging Safety; Public Workshop

Science.gov (United States)

2011-09-20

...] Magnetic Resonance Imaging Safety; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION... announcing a public workshop entitled: ``Magnetic Resonance Imaging (MRI) Safety Public Workshop.'' The purpose of the public workshop is to discuss factors affecting the safe use of magnetic resonance imaging...

Rotational Seismology Workshop of February 2006

Science.gov (United States)

Evans, John R.; Cochard, A.; Graizer, Vladimir; Huang, Bor-Shouh; Hudnut, Kenneth W.; Hutt, Charles R.; Igel, H.; Lee, William H.K.; Liu, Chun-Chi; Majewski, Eugeniusz; Nigbor, Robert; Safak, Erdal; Savage, William U.; Schreiber, U.; Teisseyre, Roman; Trifunac, Mihailo; Wassermann, J.; Wu, Chien-Fu

2007-01-01

Introduction A successful workshop titled 'Measuring the Rotation Effects of Strong Ground Motion' was held simultaneously in Menlo Park and Pasadena via video conference on 16 February 2006. The purpose of the Workshop and this Report are to summarize existing data and theory and to explore future challenges for rotational seismology, including free-field strong motion, structural strong motion, and teleseismic motions. We also forged a consensus on the plan of work to be pursued by this international group in the near term. At this first workshop were 16 participants in Menlo Park, 13 in Pasadena, and a few on the telephone. It was organized by William H. K. Lee and John R. Evans and chaired by William U. Savage in Menlo Park and by Kenneth W. Hudnut in Pasadena. Its agenda is given in the Appendix. This workshop and efforts in Europe led to the creation of the International Working Group on Rotational Seismology (IWGoRS), an international volunteer group providing forums for exchange of ideas and data as well as hosting a series of Workshops and Special Sessions. IWGoRS created a Web site, backed by an FTP site, for distribution of materials related to rotational seismology. At present, the FTP site contains the 2006 Workshop agenda (also given in the Appendix below) and its PowerPoint presentations, as well as many papers (reasonable-only basis with permission of their authors), a comprehensive citations list, and related information. Eventually, the Web site will become the sole authoritative source for IWGoRS and shared information: http://www.rotational-seismology.org ftp://ehzftp.wr.usgs.gov/jrevans/IWGoRS_FTPsite/ With contributions from various authors during and after the 2006 Workshop, this Report proceeds from the theoretical bases for making rotational measurements (Graizer, Safak, Trifunac) through the available observations (Huang, Lee, Liu, Nigbor), proposed suites of measurements (Hudnut), a discussion of broadband teleseismic rotational

Geometric Methods in Physics : XXXIII Workshop

CERN Document Server

Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

2015-01-01

This book presents a selection of papers based on the XXXIII Białowieża Workshop on Geometric Methods in Physics, 2014. The Białowieża Workshops are among the most important meetings in the field and attract researchers from both mathematics and physics. The articles gathered here are mathematically rigorous and have important physical implications, addressing the application of geometry in classical and quantum physics. Despite their long tradition, the workshops remain at the cutting edge of ongoing research. For the last several years, each Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented; some of the lectures are reproduced here. The unique atmosphere of the workshop and school is enhanced by its venue, framed by the natural beauty of the Białowieża forest in eastern Poland. The volume will be of interest to researchers and graduate students in mathematical physics, theoretical physics and m...

Geometric Methods in Physics : XXXII Workshop

CERN Document Server

Bieliavsky, Pierre; Odesskii, Alexander; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore; Geometric Methods in Physics

2014-01-01

The Białowieża Workshops on Geometric Methods in Physics, which are hosted in the unique setting of the Białowieża natural forest in Poland, are among the most important meetings in the field. Every year some 80 to 100 participants from both the mathematics and physics world join to discuss new developments and to exchange ideas. The current volume was produced on the occasion of the 32nd meeting in 2013. It is now becoming a tradition that the Workshop is followed by a School on Geometry and Physics, which consists of advanced lectures for graduate students and young researchers. Selected speakers at the 2013 Workshop were asked to contribute to this book, and their work was supplemented by additional review articles. The selection shows that, despite its now long tradition, the workshop remains at the cutting edge of research. The 2013 Workshop also celebrated the 75th birthday of Daniel Sternheimer, and on this occasion the discussion mainly focused on his contributions to mathematical physics such as ...

Initiating Events Modeling for On-Line Risk Monitoring Application

International Nuclear Information System (INIS)

Simic, Z.; Mikulicic, V.

1998-01-01

In order to make on-line risk monitoring application of Probabilistic Risk Assessment more complete and realistic, a special attention need to be dedicated to initiating events modeling. Two different issues are of special importance: one is how to model initiating events frequency according to current plant configuration (equipment alignment and out of service status) and operating condition (weather and various activities), and the second is how to preserve dependencies between initiating events model and rest of PRA model. First, the paper will discuss how initiating events can be treated in on-line risk monitoring application. Second, practical example of initiating events modeling in EPRI's Equipment Out of Service on-line monitoring tool will be presented. Gains from application and possible improvements will be discussed in conclusion. (author)

A Death Awareness Workshop: Theory, Application, and Results.

Science.gov (United States)

Whelan, W. Michael; Warren, William M.

1980-01-01

Describes an experimental death awareness workshop based on Kubler-Ross' theory. The effects of the workshop reveal cognitive and emotional changes indicating participants in the workshop to be moving towards an acceptance of death. (Author)

A Portable Computer Security Workshop

Science.gov (United States)

Wagner, Paul J.; Phillips, Andrew T.

2006-01-01

We have developed a computer security workshop designed to instruct post-secondary instructors who want to start a course or laboratory exercise sequence in computer security. This workshop has also been used to provide computer security education to IT professionals and students. It is effective in communicating basic computer security principles…

Secondary School Design: Workshop Crafts.

Science.gov (United States)

Department of Education and Science, London (England).

Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

Flywheel energy storage workshop

Energy Technology Data Exchange (ETDEWEB)

O`Kain, D.; Carmack, J. [comps.

1995-12-31

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

Final Technical Report: Electronic Structure Workshop (ES13)

Energy Technology Data Exchange (ETDEWEB)

Zhang, Shiwei [College of William and Mary, Williamsburg, VA (United States)

2015-02-26

The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

Selection of equipment for equipment qualification

International Nuclear Information System (INIS)

Torr, K.G.

1989-01-01

This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

A stress management workshop improves residents' coping skills.

Science.gov (United States)

McCue, J D; Sachs, C L

1991-11-01

We describe the effectiveness of a stress management workshop designed for physicians. Of the 64 medicine, pediatrics, and medicine-pediatrics residents who agreed to participate in the workshop, the 43 who could be freed from clinical responsibilities constituted the intervention group; the 21 residents who could not be freed from clinical responsibilities were asked to be the nonintervention group. The ESSI Stress Systems Instrument and Maslach Burnout Inventory were administered to control subjects and workshop participants 2 weeks before and 6 weeks after the workshop. The half-day workshops taught management of the stresses of medical practice through: (1) learning and practicing interpersonal skills that increase the availability of social support; (2) prioritization of personal, work, and educational demands; (3) techniques to increase stamina and attend to self-care needs; (4) recognition and avoidance of maladaptive responses; and (5) positive outlook skills. Overall, the ESSI Stress Systems Instrument test scores for the workshop participants improved (+1.27), while the nonintervention group's mean scores declined (-0.65). All 21 individual ESSI Stress Systems Instrument scale items improved for the workshop, compared with eight of 21 items for the nonintervention group. The workshop group improved in the Maslach Burnout Inventory emotional exhaustion scale and deteriorated less than the nonintervention group in the depersonalization scale. We conclude that a modest, inexpensive stress management workshop was received positively, and can lead to significant short-term improvement in stress and burnout test scores for medicine and pediatrics residents.

Lightning Performance on Overhead Distribution Lines : After Improvement Field Observation

Directory of Open Access Journals (Sweden)

Reynaldo Zoro

2009-11-01

Full Text Available Two feeders of 20 kV overhead distribution lines which are located in a high lightning density area are chosen to be observed as a field study due to their good lightning performance after improvement of lightning protection system. These two feeders used the new overhead ground wire and new line arrester equipped with lightning counter on the main lines. The significant reduced of lines outages are reported. Study was carried out to observe these improvements by comparing to the other two feeders line which are not improved and not equipped yet with the ground wire and line arrester. These two feeders located in the nearby area. Two cameras were installed to record the trajectory of the lightning strikes on the improved lines. Lightning peak currents are measured using magnetic tape measurement system installed on the grounding lead of lightning arrester. Lightning overvoltage calculations are carried out by using several scenarios based on observation results and historical lightning data derived from lightning detection network. Lightning overvoltages caused by indirect or direct strikes are analyzed to get the lightning performance of the lines. The best scenario was chosen and performance of the lines were improved significantly by installing overhead ground wire and improvement of lightning arrester installation.

Buildings energy management program workshop design. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-12-01

This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

Sixth international wind-diesel workshop

International Nuclear Information System (INIS)

1992-01-01

At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop

Sixth international wind-diesel workshop

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop.

Understanding the Deep Earth: Slabs, Drips, Plumes and More - An On the Cutting Edge Workshop

Science.gov (United States)

Williams, M. L.; Mogk, D. W.; McDaris, J. R.

2010-12-01

Exciting new science is emerging from the study of the deep Earth using a variety of approaches: observational instrumentation (e.g. EarthScope’s USArray; IRIS), analysis of rocks (xenoliths, isotopic tracers), experimental methods (COMPRES facilities), and modeling (physical and computational, e.g. CIG program). New images and models of active faults, subducting plates, mantle drips, and rising plumes are spurring a new excitement about deep Earth processes and connections between Earth’s internal systems, the plate tectonic system, and the physiography of Earth’s surface. The integration of these lines of research presents unique opportunities and also challenges in geoscience education. How can we best teach about the architecture, composition, and processes of Earth where it is hidden from direct observation. How can we make deep Earth science relevant and meaningful to students across the geoscience curriculum? And how can we use the exciting new discoveries about Earth processes to attract new students into science? To explore the intersection of research and teaching about the deep Earth, a virtual workshop was convened in February 2010 for experts in deep Earth research and undergraduate geoscience education. The six-day workshop consisted of online plenary talks, large and small group discussions, asynchronous contributions using threaded listservs and web-based work spaces, as well as development and review of new classroom and laboratory activities. The workshop goals were to: 1) help participants stay current about data, tools, services, and research related to the deep earth, 2) address the "big science questions" related to deep earth (e.g. plumes, slabs, drips, post-perovskite, etc.) and explore exciting new scientific approaches, 3) to consider ways to effectively teach about "what can't be seen", at least not directly, and 4) develop and review classroom teaching activities for undergraduate education using these data, tools, services, and

Workshop presentations

International Nuclear Information System (INIS)

Sanden, Per-Olof; Edland, Anne; Reiersen, Craig; Mullins, Peter; Ingemarsson, Karl-Fredrik; Bouchard, Andre; Watts, Germaine; Johnstone, John; Hollnagel, Erik; Ramberg, Patric; Reiman, Teemu

2009-01-01

An important part of the workshop was a series of invited presentations. The presentations were intended to both provide the participants with an understanding of various organisational approaches and activities as well as to stimulate the exchange of ideas during the small group discussion sessions. The presentation subjects ranged from current organisational regulations and licensee activities to new organisational research and the benefits of viewing organisations from a different perspective. There were more than a dozen invited presentations. The initial set of presentations gave the participants an overview of the background, structure, and aims of the workshop. This included a short presentation on the results from the regulatory responses to the pre-workshop survey. Representatives from four countries (Sweden, Canada, Finland, and the United Kingdom) expanded upon their survey responses with detailed presentations on both regulatory and licensee safety-related organisational activities in their countries. There were also presentations on new research concerning how to evaluate safety critical organisations and on a resilience engineering perspective to safety critical organisations. Below is the list of the presentations, the slides of which being available in Appendix 2: 1 - Workshop Welcome (Per-Olof Sanden); 2 - CSNI Working Group on Human and Organisational Factors (Craig Reiersen); 3 - Regulatory expectations on justification of suitability of licensee organisational structures, resources and competencies (Anne Edland); 4 - Justifying the suitability of licensee organisational structures, resources and competencies (Karl-Fredrik Ingemarsson); 5 - Nuclear Organisational Suitability in Canada (Andre Bouchard); 6 - Designing and Resourcing for Safety and Effectiveness (Germaine Watts); 7 - Organisational Suitability - What do you need and how do you know that you've got it? (Craig Reiersen); 8 - Suitability of Organisations - UK Regulator's View (Peter

10 CFR 20.1703 - Use of individual respiratory protection equipment.

Science.gov (United States)

2010-01-01

... continuous communication with the workers (visual, voice, signal line, telephone, radio, or other suitable... characteristics of the equipment are capable of providing the proposed degree of protection under anticipated... communication failure, significant deterioration of operating conditions, or any other conditions that might...

PREFACE: Collapse Calderas Workshop

Science.gov (United States)

Gottsmann, Jo; Aguirre-Diaz, Gerardo

2008-10-01

Caldera-formation is one of the most awe-inspiring and powerful displays of nature's force. Resultant deposits may cover vast areas and significantly alter the immediate topography. Post-collapse activity may include resurgence, unrest, intra-caldera volcanism and potentially the start of a new magmatic cycle, perhaps eventually leading to renewed collapse. Since volcanoes and their eruptions are the surface manifestation of magmatic processes, calderas provide key insights into the generation and evolution of large-volume silicic magma bodies in the Earth's crust. Despite their potentially ferocious nature, calderas play a crucial role in modern society's life. Collapse calderas host essential economic deposits and supply power for many via the exploitation of geothermal reservoirs, and thus receive considerable scientific, economic and industrial attention. Calderas also attract millions of visitors world-wide with their spectacular scenic displays. To build on the outcomes of the 2005 calderas workshop in Tenerife (Spain) and to assess the most recent advances on caldera research, a follow-up meeting was proposed to be held in Mexico in 2008. This abstract volume presents contributions to the 2nd Calderas Workshop held at Hotel Misión La Muralla, Querétaro, Mexico, 19-25 October 2008. The title of the workshop `Reconstructing the evolution of collapse calderas: Magma storage, mobilisation and eruption' set the theme for five days of presentations and discussions, both at the venue as well as during visits to the surrounding calderas of Amealco, Amazcala and Huichapan. The multi-disciplinary workshop was attended by more than 40 scientist from North, Central and South America, Europe, Australia and Asia. Contributions covered five thematic topics: geology, geochemistry/petrology, structural analysis/modelling, geophysics, and hazards. The workshop was generously supported by the International Association of Volcanology and the Chemistry of The Earth's Interior

EDITORIAL: 15th Workshop on MHD Stability Control: 3D Magnetic Field Effects in MHD Control 15th Workshop on MHD Stability Control: 3D Magnetic Field Effects in MHD Control

Science.gov (United States)

Buttery, Richard

2011-08-01

This annual workshop on MHD Stability Control has been held since 1996 with a focus on understanding and developing control of MHD instabilities for future fusion reactors. The workshop generally covers a wide range of stability topics: from disruptions, to tearing modes, error fields, ELMs, resistive wall modes (RWMs) and ideal MHD. It spans many device types, particularly tokamaks, stellarators and reversed field pinches, to pull out commonalities in the physics and improve understanding. In 2010 the workshop was held on 15-17 November at the University of Wisconsin in Madison and was combined with the annual US-Japan MHD Workshop. The theme was `3D Magnetic Field Effects in MHD Control', with a focus on multidisciplinary sessions exploring issues of plasma response to 3D fields, the manifestation of such fields in the plasma, and how they influence stability. This has been a topic of renewed interest, with utilisation of 3D fields for ELM control now planned in ITER, and a focus on the application of such fields for error field correction, disruption avoidance, and RWM control. Key issues included the physics of the interaction, types of coils and harmonic spectra needed to control instabilities, and subsidiary effects such as braking (or rotating) the plasma. More generally, a wider range of issues were discussed including RWM physics, tearing mode physics, disruption mitigation, ballooning stability, the snowflake divertor concept, and the line tied pinch! A novel innovation to the meeting was a panel discussion session, this year on Neoclassical Toroidal Viscosity, which ran well; more will be tried next year. In this special section of Plasma Physics and Controlled Fusion we present several of the invited and contributed papers from the 2010 workshop, which have been subject to the normal refereeing procedures of the journal. These papers give a sense of the exceptional quality of the presentations at this workshop, all of which may be found at http

UHV equipment for light line of the Laboratorio Nacional de Luz Sincrotron - LNLS

International Nuclear Information System (INIS)

Pacheco, J.G.; Fonseca, P.T.; Castro, A.R.B. de

1991-01-01

The construction of light line for spectral range from 12 to 310 eV of Laboratorio Nacional de Luz Sincrotron (LNLS) is presented. The basic parameters of light line are shown. The components of UHV constructed in the LNLS considering installation aspects and final results are exposed. (M.C.K.)

South Asia transboundary water quality monitoring workshop summary report.

Energy Technology Data Exchange (ETDEWEB)

Betsill, Jeffrey David; Littlefield, Adriane C.; Luetters, Frederick O.; Rajen, Gaurav

2003-04-01

The Cooperative Monitoring Center (CMC) promotes collaborations among scientists and researchers in several regions as a means of achieving common regional security objectives. To promote cooperation in South Asia on environmental research, an international working group made up of participants from Bangladesh, India, Nepal, Pakistan, and the United States convened in Kathmandu, Nepal, from February 17-23,2002. The workshop was held to further develop the South Asia Transboundary Water Quality Monitoring (SATWQM) project. The project is sponsored in part by the CMC located at Sandia National Laboratories in Albuquerque, New Mexico through funding provided by the US. Department of State, Regional Environmental Affairs Office, American Embassy, Kathmandu, Nepal, and the National Nuclear Security Administration's (NNSA) Office of Nonproliferation and National Security. This report summarizes the SATWQM project, the workshop objectives, process and results. The long-term interests of the participants are to develop systems for sharing regional environmental information as a means of building confidence and improving relations among South Asian countries. The more immediate interests of the group are focused on activities that foster regional sharing of water quality data in the Ganges and Indus River basins. Issues of concern to the SATWQM network participants include studying the impacts from untreated sewage and industrial effluents, agricultural run-off, salinity increases in fresh waters, the siltation and shifting of river channels, and the environmental degradation of critical habitats such as wetlands, protected forests, and endangered aquatic species conservation areas. The workshop focused on five objectives: (1) a deepened understanding of the partner organizations involved; (2) garnering the support of additional regional and national government and non-government organizations in South Asia involved in river water quality monitoring; (3) identification

Proceedings of the fifth workshop on containment integrity

Energy Technology Data Exchange (ETDEWEB)

Parks, M.B.; Hughey, C.E. [eds.] [Sandia National Labs., Albuquerque, NM (United States)

1992-07-01

The Fifth Workshop on Containment integrity was held in Washington, DC, on May 12--14, 1992. The purpose of these workshops is to provide an international forum for the exchange of information on performance of containments in nuclear power plants under severe accident loadings. Severe accident investigations of existing containment designs as well as future advanced containments were presented during the workshop. There were 145 participants at the workshop from 15 countries. Individual papers have been cataloged separately.

Equipment for maintenance and repair of 900 MW PWR units in France

International Nuclear Information System (INIS)

Blary, F.; Castaing, C.; Haessig, M.

1984-01-01

As of March 1984, Electricite de France has been operating twenty-seven 900 MW PWR power units. To cut down unit unavailability and reduce the dosimetric requirements of maintenance staff, a wide range of special devices for inspecting and repairing equipment has been designed; details of 64 operational devices and a further 18 still being developed are given in a maintenance catalogue. This special equipment, together with maintenance and repair procedures, has been devised in collaboration with Framatome, the constructor of the nuclear island. One particular problem resolved was that of replacing the pins of the upper internals (UI) of 21 operational units, preventive measures having been taken at the other units. The strategy adopted consisted, first, in setting up a pin-changing workshop to enable the pins and guide tubes to be replaced separately and, second, in devising and applying wherever possible a method for partially replacing the guide tubes outside the critical path of the outage by means of a mobile pool known as the 'Aquarium'. (author)

PS2004 Light-harvesting Systems Workshop

Energy Technology Data Exchange (ETDEWEB)

Blankenship, Robert E.

2005-01-01

This special issue of the international scientific research journal Photosynthesis Research consists of 25 original peer-reviewed contributions from participants in the PS 2004 Lisht-Harvesting Systems Workshop. This workshop was held from 26-29, 2004 at Hotel Le Chantecler, Sainte-Adele, Quebec, Canada. The workshop was a satellite meeting of the XIII International Congress on Photosynthesis held August 29-September 3, 2004 in Montreal, Canada. The workshope dealt with all types of photosynthetic antenna systems and types of organisms, including anoxygenic photosynthetic bacteria, cyanobacteria, algae and higher plants, as well as in vitro studies of isolated pigments. This collection of papers is a good representation of the highly interdisciplinary nature of modern research on photosynthetic antenna complexes, utilizing techniques of advanced spectroscopy, biochemistry, molecular biology, synthetic chemistry and structural determination to understand these diverse and elegant molecular complexes.

Connecting with the Arts: A Workshop for Middle Grades Teachers

Science.gov (United States)

Annenberg Media, 2005

2005-01-01

"Connecting with the Arts: A Workshop for Middle Grades Teachers" is a video workshop for middle school teachers of the arts and other subjects. The workshop includes eight hour-long video programs and a companion workshop guide and Web site. The workshop shows middle school teachers why and how to integrate the arts (dance, music, theatre, and…

Influence Of Extension Education Workshop On Cabbage Growers ...

African Journals Online (AJOL)

Influence Of Extension Education Workshop On Cabbage Growers Awareness And Knowledge Of Ipm In Aghtapeh Town, Iran. ... A survey was conducted among 60 farmers in Karaj County that included 30 workshop participants, and 30 randomly selected farmers. The study found that workshop participants had ...

Teaching Environmental Geology in the 21St Century: A Workshop Report

Science.gov (United States)

Mogk, D. W.; Wiese, K.; Castendyk, D.; McDaris, J. R.

2012-12-01

included keynote talks, small group discussion sessions, interactive demonstrations, and opportunities to network and develop ideas for new instructional resources. The participants also reviewed over 300 teaching activities, and contributed to additional online resources focused on Environmental Geology. Field trips demonstrated teaching activities about environmental issues in local contexts. All workshop presentations, discussion summaries, teaching activity collections and related on-line resources are available on the workshop website. Faculty are encouraged to submit additional examples of Environmental Geology instructional resources.

Studing the Influence of Six Main Industrial Losses on Overall Equipment Effectiveness in Cold Rolling Unit of Mobarakeh Steel Complex

Directory of Open Access Journals (Sweden)

seyed Akbar Nilipour Tabatabaei

2011-03-01

Full Text Available Overall Equipment Effectiveness (OEE is a key indicator and a basis for evaluating the effectiveness of equipments as well as assessing the effectiveness of the Total Productive Maintenance (TPM system. This indicator together with overall equipment performance can be used in production lines such as steel production. The aim of this article is to study the influence of six main industrial losses on the OEE indicator . For this purpose, the OEE has been calculated in the cold rolling production lines of Mobarakeh Steel Complex the gap between production lines and the global industrial standards has been studied the causes of production system inefficiency has been investigated and the effectiveness of TPM system, equipments' bottlenecks and the influence of the main industry losses on OEE have been studied. The findings imply that the influence of the variation of availability and performance rates on OEE is high, while the influence of the variation of quality rate on OEE is not considerable.

Proceedings of 6th International Microbeam Workshop/12th L.H. Gray Workshop Microbeam Probes of Cellular Radiation Response

International Nuclear Information System (INIS)

Prise, Kevin M.

2004-01-01

The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology

FY 2000 Saltcake Dissolution and Feed Stability Workshop

International Nuclear Information System (INIS)

Hunt, R.D.; McGinnis, C.P.; Weber, C.F.; Welch, T.D.; Jewett, J.R.

2000-01-01

The Tanks Focus Area (TFA) continues to work closely with the Office of River Protection (ORP) to better understand the chemistry involved with the retrieval, transport, and pretreatment of nuclear wastes at Hanford. Since a private contractor is currently responsible for the pretreatment and immobilization activities in this remediation effort, the TFA has concentrated on saltcake dissolution and waste transport at the request of the ORP. Researchers at Hanford have performed a series of dissolution experiments on actual saltcake samples. Staff members at Mississippi State University (MSU) continue to model the dissolution results with the Environmental Simulation Program (ESP), which is used extensively by ORP personnel. Several ways to improve the predictive capabilities of the ESP were identified. Since several transfer lines at Hanford have become plugged, TFA tasks at AEA Technologies, Florida International University (FIU), MSU, and Oak Ridge National Laboratory (ORNL) are investigating the behavior of the supernatants and slurries during transport. A combination of experimental and theoretical techniques is used to study the transport chemistry. This effort is expected to develop process control tools for waste transfer. The results from these TFA tasks were presented to ORP personnel during the FY 2000 Saltcake Dissolution and Feed Stability Workshop, which was held on May 16-17 in Richland, Washington. The minutes from this workshop are provided in this report

CHDS Sponsors Critical Infrastructure Protection Workshop

OpenAIRE

Center for Homeland Defense and Security

2008-01-01

Center for Homeland Defense and Security, PRESS RELEASES The NPS Center for Homeland Defense and Security in partnership with the U.S. Department of Homeland Security recently hosted its first Critical Infrastructure Protection Workshop. The workshop brought together practitioners and...

High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

2010-09-01

Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

Electricity Breakdown Management for Sarawak Energy: Use of Condition-Based Equipment for Detection of Defective Insulator

Science.gov (United States)

Tan, J. K.; Abas, N.

2017-07-01

Managing electricity breakdown is vital since an outage causes economic losses for customers and the utility companies. However, electricity breakdown is unavoidable due to some internal or external factors beyond our control. Electricity breakdown on overhead lines tend occur more frequently because it is prone to external disturbances such as animal, overgrown vegetation and defective pole top accessories. In Sarawak Energy Berhad (SEB), majority of the network are composed of overhead lines and hence, is more prone to failure. Conventional method of equipment inspection and fault finding are not effective to quickly identify the root cause of failure. SEB has engaged the use of corona discharge camera as condition-based monitoring equipment to carry out condition based inspection on the line in order to diagnose the condition of the lines prior to failure. Experimental testing has been carried out to determine the correlation between the corona discharge count and the level of defect on line insulator. The result shall be tabulated and will be used as reference for future scanning and diagnostic on any defect on the lines.

Workshop I: Gender Studies

Science.gov (United States)

Hennessey, Eden; Kurup, Anitha; Meza-Montes, Lilia; Shastri, Prajval; Ghose, Shohini

2015-12-01

Participants in the Gender Studies workshop of the 5th IUPAP International Conference on Women in Physics discussed the gender question in science practice from a policy perspective, informed by investigations from the social science disciplines. The workshop's three sessions—"Equity and Education: Examining Gender Stigma in Science," "A Comparative Study of Women Scientists and Engineers: Experiences in India and the US," and "Toward Gender Equity Through Policy: Characterizing the Social Impact of Interventions—are summarized, and the resulting recommendations presented.

Comparison of On-Line Maintenance Support Tools

International Nuclear Information System (INIS)

Simic, Z.; Follen, S. M.; Mikulicic, V.

1998-01-01

Modeling approach to on-line risk monitoring is today in a rapid developing phase. For that reason number of different solutions are available. This paper will attempt to present existing approaches to address on-line risk modeling problem Starting with description of on-line risk monitoring issues in general, then following by presentation of existing software tools (EPRI's Safety Monitor, Equipment Out of Service Monitor, and ORAM-SENTINEL) the current state of the art in this area will be demonstrated. Finally, conclusions and ideas will be outlined. (author)

Proceedings of the workshop on advanced thermal-hydraulic and neutronic codes: current and future applications

International Nuclear Information System (INIS)

2001-01-01

new numerical methods, benchmarking physical models, preserving and enlarging the experimental database for code validation, and improving codes' 'user friendliness'. The Barcelona Workshop has reviewed the development since then. It observed that the evolution is in line with those recommendations and that substantial progress was made. Additional recommendations were issued. The basic trends from Annapolis still hold and are reaffirmed in the frame of evolving regulatory and commercial environments

The second international workshop on enterprise security

OpenAIRE

Chang, V; Ramachandran, M; Yen, NN; Walters, RJ; Wills, G

2016-01-01

Welcome to our second international workshop on Enterprise Security as part of CloudCom 2015, Vancouver, Canada, November 30-December 3, 2015. The first international workshop held in Singapore has been a major success since then we have achieved greater team activities, research, and international collaborations as the major and significant outcome of our first workshop on this topic. Enterprise Security involves all business, products, governments, organization, and their contractors. This ...

Robustness of Electrical Systems of Nuclear Power Plants in Light of the Fukushima Daiichi Accident (ROBELSYS). Workshop Proceedings, Paris, France, 1-4 April 2014 - Robustness of Electrical Systems of NPP's in Light of the Fukushima Daiichi Accident. ROBELSYS Workshop Proceedings

International Nuclear Information System (INIS)

2015-01-01

The March 2011 accident at Fukushima Daiichi triggered discussions about the significance of electrical power hazards and their treatment in safety analyses. In order to address these issues and provide relevant conclusions and recommendations to CSNI and CNRA, the Robustness in Electrical Systems (ROBELSYS) Technical Working Group was established in 2012 under the leadership of the Institut de Radioprotection et de Surete Nucleaire (IRSN) of France. The purpose of the ROBELSYS Technical Working Group was to organize an international workshop to identify and discuss the lessons learned from the Fukushima Daiichi accident. The workshop was focused on the provisions taken by various countries concerning national requirements and modifications to the plant designs in order to enhance the robustness of electrical systems, especially the protection against extreme external hazards. The ROBELSYS workshop was held at the OECD Conference Centre in Paris in April 1-4, 2014. A total of 105 participants attended the workshop representing industry and government organisations from 25 countries, as well as international organisations. A total of 34 technical presentations were given in seven sessions as follows: - 1: National Programmes on Evolution of Onsite and Offsite Electric Power Systems; - 2: Role of Electric Power in Severe Accident Management; - 3: Requirements for Robustness of Onsite Electric Power Systems; - 4: Simulation of Transients within NPP Plant Distribution Systems; - 5: Requirements for Equipment Used for Emergency Response; - 6: Margin Assessments for Modern Power Electronics; - 7: Digital Components in Power Systems. Items addressed in the workshop included: - Review of the lessons learned from the Fukushima accident concerning the robustness of electrical systems; - Review of the provisions already taken or planned after the Fukushima accident, regarding the sources, the distribution systems and the loads, and documenting the technical basis for these

Special workshop on lung dosimetry

International Nuclear Information System (INIS)

Fisher, D.R.

1983-01-01

A Special Workshop on Lung Dosimetry was convened in Salt Lake City, Utah, on April 21-22, 1982, to stimulate the use of improved radiation dosimetry and to formulate a stronger basis for dose-response relationships for inhaled radionuclides. The two-day workshop was held in conjunction with the 30th Annual Meeting of the Radiation Research Society. Publication is planned

Entrepreneurship Education: Workshops and Entrepreneurial Intentions

Science.gov (United States)

Pruett, Mark

2012-01-01

Using data collected from participants in an entrepreneurship education workshop series, the author examined the series' impact and tested a model of entrepreneurial intentions incorporating social and psychological factors. He found that entrepreneurial disposition and workshop participation significantly influenced intentions, exposure to role…

Cleanroom Energy Efficiency Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Tschudi, Bill

1999-03-15

On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

Extreme Conditions Modeling Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-07-01

Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

Waterloo Workshop on Computer Algebra

CERN Document Server

Zima, Eugene; WWCA-2016; Advances in computer algebra : in honour of Sergei Abramov's' 70th birthday

2018-01-01

This book discusses the latest advances in algorithms for symbolic summation, factorization, symbolic-numeric linear algebra and linear functional equations. It presents a collection of papers on original research topics from the Waterloo Workshop on Computer Algebra (WWCA-2016), a satellite workshop of the International Symposium on Symbolic and Algebraic Computation (ISSAC’2016), which was held at Wilfrid Laurier University (Waterloo, Ontario, Canada) on July 23–24, 2016.   This workshop and the resulting book celebrate the 70th birthday of Sergei Abramov (Dorodnicyn Computing Centre of the Russian Academy of Sciences, Moscow), whose highly regarded and inspirational contributions to symbolic methods have become a crucial benchmark of computer algebra and have been broadly adopted by many Computer Algebra systems.

Auroral Tomography Workshop, Proceedings

International Nuclear Information System (INIS)

Steen, Aa.

1993-08-01

In ionospheric and atmospheric physics the importance of multi-station imaging has grown as a consequence of the availability of scientific grade CCD cameras with digital output and affordable massive computing power. Tomographic inversion techniques are used in many different areas, e.g. medicine, plasma research and space physics. The tomography workshop was announced to gather a limited group of people interested in auroral tomography or tomographic inversion methods in general. ALIS (Auroral Large Imaging System) is a multi-station ground-based system developed primarily for three-dimensional auroral imaging, however other non-auroral objects can be studied with ALIS, e.g. stratospheric clouds. Several of the contributions in the workshop dealt with problems related to geometries similar to the ALIS-configuration. The Proceedings contain written contributions received either in abstract form or as full papers. The Proceedings also contain contributions intended for the Workshop but not presented due to the absence of the speaker. Separate abstracts have been prepared for 15 of the 17 papers

Grid and Entrepreneurship Workshop

CERN Multimedia

2006-01-01

The CERN openlab is organising a special workshop about Grid opportunities for entrepreneurship. This one-day event will provide an overview of what is involved in spin-off technology, with a special reference to the context of computing and data Grids. Lectures by experienced entrepreneurs will introduce the key concepts of entrepreneurship and review, in particular, the industrial potential of EGEE (the EU co-funded Enabling Grids for E-sciencE project, led by CERN). Case studies will be given by CEOs of European start-ups already active in the Grid and computing cluster area, and regional experts will provide an overview of efforts in several European regions to stimulate entrepreneurship. This workshop is designed to encourage students and researchers involved or interested in Grid technology to consider the entrepreneurial opportunities that this technology may create in the coming years. This workshop is organized as part of the CERN openlab student programme, which is co-sponsored by CERN, HP, ...

Spectrophotometry of emission-line stars in the magellanic clouds

Science.gov (United States)

Bohannan, Bruce

1990-01-01

The strong emission lines in the most luminous stars in the Magellanic Clouds indicate that these stars have such strong stellar winds that their photospheres are so masked that optical absorption lines do not provide an accurate measure of photospheric conditions. In the research funded by this grant, temperatures and gravities of emission-line stars both in the Large (LMC) and Small Magellanic Clouds (SMC) have been measured by fitting of continuum ultraviolet-optical fluxes observed with IUE with theoretical model atmospheres. Preliminary results from this work formed a major part of an invited review 'The Distribution of Types of Luminous Blue Variables'. Interpretation of the IUE observations obtained in this grant and archive data were also included in a talk at the First Boulder-Munich Hot Stars Workshop. Final results of these studies are now being completed for publication in refereed journals.

Research-Based Astronomy Workshops for Secondary School Students in Thailand

Science.gov (United States)

Rujopakarn, Wiphu; Kirdkao, Thagoon

We present the results of the Learning Center for Earth Sciences and Astronomy (LESA). Thai-land organizes a series of research-based astronomical workshops for secondary school students in the country during 2006 present. The goal of LESA is to apply the research-based learn-ing approach to complement astronomy education, which has been included in the national curriculum since 2002, and to let students gain first-hand experience in astronomical research. Realization of research-based astronomical education in Thailand has long been held back by the limited availability of astronomical facilities in the country. We therefore developed work-shop modules for students using professional astronomical data generously made available to us through various collaborations and on-line archives. Two major difficulties we have overcame in developing these modules are, first, to seek research topics that are meaningful, inspiring, and can demonstrate the process of astronomical research with minimal background in astrophysics, and second, to find the software capable of processing large amounts of astronomical data, yet easily accessible for students. Our workshop modules centered on the basic research methods in observational astronomy, including astrometry, photometry, and spectroscopy. Data for these analysis modules were obtained through collaboration with various research groups, such as re-mote robotic telescopes access from the Robotic Optical Transient Search Experiment and the Las Cumbres Observatory Global Telescope Network, archival images from the Catalina Sky Survey, archival spectra from the Observatoire de Haute-Provence, and imaging and spectral data from the Sloan Digital Sky Survey. We adapt the raw data such that they can be accessed and analyzed with freely-available astronomical software such as the Iris or SAOImage ds9 and VSpec for imaging and spectral data, respectively. In each of the past five years, we have organized year-round workshops for students

Data acquisition, remote control and equipment monitoring for ISOLDE RILIS

CERN Document Server

Rossel, R E; Richter, D; Wendt, K D A; Rothe, S; Marsh, B A

2013-01-01

With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation of new pump lasers, commercial dye lasers and a complementary, fully solid-state titanium:sapphire laser system. The framework of the upgrade also required the setup of a network-extended, LabVIEW-based system for data acquisition, remote control and equipment monitoring, to support RILIS operators as well as ISOLDE users. The syst...

Exploring Programmatic Interoperability: Army Future Force Workshop

National Research Council Canada - National Science Library

Smith , II., James D; Meyers, B. C

2005-01-01

.... It describes the background and motivation for the workshop, provides a brief overview of the workshop activities, and highlights the key observations and conclusions obtained through the course...

IAEA monitoring field trials workshop

International Nuclear Information System (INIS)

Ross, H.H.; Cooley, J.N.; Belew, W.L.

1995-01-01

Recent safeguards inspections in Iraq and elsewhere by the International Atomic Energy Agency (IAEA) have led to the supposition that environmental monitoring can aid in verifying declared and in detecting undeclared nuclear activities or operations. This assumption was most recently examined by the IAEA's Standing Advisory Group on Safeguards Implementation (SAGSI), in their reports to the IAEA Board of Governors. In their reports, SAGSI suggested that further assessment and development of environmental monitoring would be needed to fully evaluate its potential application to enhanced IAEA safeguards. Such an inquiry became part of the IAEA ''Programme 93+2'' assessment of measures to enhance IAEA safeguards. In March, 1994, the International Safeguards Group at Oak Ridge hosted an environmental monitoring field trial workshop for IAEA inspectors to train them in the techniques needed for effective environmental sampling. The workshop included both classroom lectures and actual field sampling exercises. The workshop was designed to emphasize the analytical infrastructure needed for an environmental program, practical sampling methods, and suggested procedures for properly planning a sampling campaign. Detailed techniques for swipe, vegetation, soil, biota, and water associated sampling were covered. The overall approach to the workshop, and observed results, are described

Impressions from the 3rd Nordcode Seminar & Workshop

DEFF Research Database (Denmark)

Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

2005-01-01

This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

How to put on an ANS teachers' workshop

International Nuclear Information System (INIS)

Besmann, T.M.

1991-01-01

One of the most successful public outreach programs organized by the American Nuclear Society (ANS) has been the teachers' workshops. They are so highly thought of that a national meeting is considered incomplete without an attendant workshop. The workshops are also included in topical meetings, and a number are simply organized by local sections with no connection to a technical meeting. The accumulated experience with these workshops has now matured to where a set of reasonable guidelines can be established, although there are no guarantees of success or hard and fast rules

PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

Science.gov (United States)

Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

2014-03-01

This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

WWER-1000 reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series 12, 'Reactor Simulator Development' (2001). Course material for workshops using a pressurized water reactor (PWR) Simulator developed for the IAEA by Cassiopeia Technologies Inc. of Canada is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003) and Training Course Series No. 23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using the WWER-1000 Reactor Department Simulator from the Moscow Engineering and Physics Institute, Russian Federation. N. V. Tikhonov and S. B. Vygovsky of the Moscow Engineering and Physics Institute prepared this report for the IAEA

Proceedings of the second data acquisition system workshop

International Nuclear Information System (INIS)

Ohska, T.K.

1988-02-01

The second data acquisition system workshop was held on July 18 and 19, 1986 at the National Laboratory for High Energy Physics (KEK). The organizers had one thing in mind when this workshop was planned. It was wanted to make a record of mistakes in designing and building the electronic system. The time when this workshop was held was just before the completion of the TRISTAN detectors when everyone was very busy. Brilliant achievements have been published every year in the world, but the hard earned experience on what should not be done does not appear on publication. To record it while it is still hot was the basic motivation of this workshop. More than 100 people attended the workshop, and some speakers did excellently what the organizers hoped to do, but some talked on their great achievements only. The organizers are very thankful to everybody who helped before, during and after the workshop. If possible, it should be asked all speakers to hand in their write-ups on the day of the workshop. Actually, the last write-up was received almost one year late, and the publication of this report delayed. In this book, those write-ups are collected. (Kako, I.)

12th Advanced Accelerator Concept (AAC 2006) Workshop

International Nuclear Information System (INIS)

Piot, Philippe

2006-01-01

Summary of the 12th Advanced Accelerator Concept (AAC 2006) Workshop help by NIU and ANL on July 10th-15th 2006 in Lake Geneva WI. The proceedings of the workshop have been published as an AIP conference proceedings '12th Advanced Accelerator Concepts Workshop' volume 877. The Twelfth Workshop on Advanced Accelerator Concepts was held at the Grand Geneva Resort in Lake Geneva, Wisconsin, from July 10 to July 15, 2006. The Workshop was sponsored by the High Energy Physics program of the U.S. Department of Energy, and was hosted by the Argonne Wakefield Accelerator Group (AWA) of Argonne National Laboratory and by Northern Illinois University. The workshop is a bi-annual meeting among physicist working on novel charged particle acceleration concept. The name 'advanced accelerator' physics covers long term research and development in beam physics and accelerator technologies. Some of the topics in advanced accelerator R and D are laser acceleration of electrons, wake field acceleration, novel high power rf source, new beam diagnostics, free-electron lasers, generating high brightness electron beams etc. The Advanced Accelerator Concept workshop is the only acknowledged and fully sponsored forum that provides a platform for inter- and cross-disciplinary discussion on various aspects of advanced accelerator and beam physics/technology concepts.

1995 second modulator-klystron workshop: A modulator-klystron workshop for future linear colliders

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This second workshop examined the present state of modulator design and attempted an extrapolation for future electron-positron linear colliders. These colliders are currently viewed as multikilometer-long accelerators consisting of a thousand or more RF sources with 500 to 1,000, or more, pulsed power systems. The workshop opened with two introductory talks that presented the current approaches to designing these linear colliders, the anticipated RF sources, and the design constraints for pulse power. The cost of main AC power is a major economic consideration for a future collider, consequently the workshop investigated efficient modulator designs. Techniques that effectively apply the art of power conversion, from the AC mains to the RF output, and specifically, designs that generate output pulses with very fast rise times as compared to the flattop. There were six sessions that involved one or more presentations based on problems specific to the design and production of thousands of modulator-klystron stations, followed by discussion and debate on the material.

Controlled Compact High Voltage Power Lines

Directory of Open Access Journals (Sweden)

Postolati V.

2016-04-01

Full Text Available Nowadays modern overhead transmission lines (OHL constructions having several significant differences from conventional ones are being used in power grids more and more widely. Implementation of compact overhead lines equipped with FACTS devices, including phase angle regulator settings (compact controlled OHL, appears to be one of the most effective ways of power grid development. Compact controlled AC HV OHL represent a new generation of power transmission lines embodying recent advanced achievements in design solutions, including towers and insulation, together with interconnection schemes and control systems. Results of comprehensive research and development in relation to 110–500kV compact controlled power transmission lines together with theoretical basis, substantiation, and methodological approaches to their practical application are presented in the present paper.

Dreissenid mussel research priorities workshop

Science.gov (United States)

Sytsma, Mark; Phillips, Stephen; Counihan, Timothy D.

2015-01-01

Currently, dreissenid mussels have yet to be detected in the northwestern part of the United States and western Canada. Infestation of one of the jurisdictions within the mussel-free Pacific Northwest would likely have significant economic, soci­etal and environmental implications for the entire region. Understanding the biology and environmental tolerances of dreissenid mussels, and effectiveness of various man­agement strategies, is key to prevention.On November 4-5, 2015, the Aquatic Bioinvasion Research and Policy Institute and the Center for Lakes and Reservoirs at Portland State University, the US Geological Survey, and the Pacific States Marine Fisheries Commission, convened a Dreissenid Mussel Research Priorities Workshop funded by the Great Northern Landscape Conservation Cooperative. The purpose of the workshop was to review dreissenid research priorities in the 2010 Quagga-Zebra Mussel Action Plan for Western U.S. Waters, reassess those priorities, incorporate new information and emerging trends, and develop priorities to strategically focus research efforts on zebra and quagga mussels in the Pacific Northwest and ensure that future research is focused on the highest priorities. It is important to note that there is some repetition among dreissenid research priority categories (e.g., prevention, detection, control, monitoring, and biology).Workshop participants with research experience in dreissenid mussel biology and management were identified by a literature review. State and federal agency managers were also invited to the workshop to ensure relevancy and practicality of the work­shop outcomes. A total of 28 experts (see sidebar) in mussel biology, ecology, and management attended the workshop.

Reduction of the visual impact of overhead transmission line systems through utilisation of line surge arresters as lightning protection

DEFF Research Database (Denmark)

Sørensen, Thomas Kjærsgaard; Holbøll, Joachim

2008-01-01

with the Technical University of Denmark, on how to lessen the visual impact of 400 kV overhead line transmission systems. In this paper omission of shield wires combined with installation of a suitable number of line surge arresters is investigated as a possible alternative to transmission lines equipped...... with shielding wires thereby reducing tower height, allowing more compact designs of towers thus minimizing the visual environment impact of the lines. Omission of shield wires in the system and instead utilizing a larger number of surge arresters in the (upper) phases of an overhead line without reduction...... will be investigated by transient simulations on a 400 kV line with either shield wires or line surge arresters. These simulations will also be used to estimate number and location of the line surge arresters in the line to ensure a satisfactory performance of the line when omitting shield wires in the tower top...

Midwest Transmission Workshop II Summary

Energy Technology Data Exchange (ETDEWEB)

Kevin Bryan

2002-12-05

OAK-B135 After introductions of all participants, Abby Arnold, RESOLVE, reviewed the purpose of the meeting and the agenda. The purpose of the workshop was to share the results of the Midwest Independent System Operator (MISO) scenario development for wind and other fuel sources and the corresponding implications for transmission throughout the MISO control area. The workshop agenda is included in Attachment A.

3. Halden Reactor Project Workshop

International Nuclear Information System (INIS)

Louka, Michael N.

2005-09-01

A workshop was held in Halden 2nd-3rd March 2005 to discuss 'VR in the Future Industrial Workplace: Working Together - Regardless of Distance'. The workshop sessions and discussions focused on design, operations and maintenance, training, and engineering virtual reality systems, and provided useful insights into the current state of the art of research and development in the fields of virtual and augmented reality. (Author)

Cyber Mutual Assistance Workshop Report

Science.gov (United States)

2018-02-01

Threat Intelligence 19 2.13 Industry Forums and Groups 20 2.14 Cybersecurity Vendors 20 3 Conclusions and Recommendations 22 Appendix A List of...establishing reliable situational awareness from an OT per- spective, from manual change analysis to machine learning or artificial intelligence . From a...dark web, or following cybersecurity -related news. Workshop members identified other threat intelligence collection sources during the workshop, which

Accelerator reliability workshop

International Nuclear Information System (INIS)

Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

2002-01-01

About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

Accelerator reliability workshop

Energy Technology Data Exchange (ETDEWEB)

Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

2002-07-01

About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

Second Greenhouse Gas Information System Workshop

Science.gov (United States)

Boland, S. W.; Duren, R. M.; Mitchiner, J.; Rotman, D.; Sheffner, E.; Ebinger, M. H.; Miller, C. E.; Butler, J. H.; Dimotakis, P.; Jonietz, K.

2009-12-01

The second Greenhouse Gas Information System (GHGIS) workshop was held May 20-22, 2009 at the Sandia National Laboratories in Albuquerque, New Mexico. The workshop brought together 74 representatives from 28 organizations including U.S. government agencies, national laboratories, and members of the academic community to address issues related to the understanding, operational monitoring, and tracking of greenhouse gas emissions and carbon offsets. The workshop was organized by an interagency collaboration between NASA centers, DOE laboratories, and NOAA. It was motivated by the perceived need for an integrated interagency, community-wide initiative to provide information about greenhouse gas sources and sinks at policy-relevant temporal and spatial scales in order to significantly enhance the ability of national and regional governments, industry, and private citizens to implement and evaluate effective climate change mitigation policies. This talk provides an overview of the second Greenhouse Gas Information System workshop, presents its key findings, and discusses current status and next steps in this interagency collaborative effort.

The 3d International Workshop on Computational Electronics

Science.gov (United States)

Goodnick, Stephen M.

1994-09-01

The Third International Workshop on Computational Electronics (IWCE) was held at the Benson Hotel in downtown Portland, Oregon, on May 18, 19, and 20, 1994. The workshop was devoted to a broad range of topics in computational electronics related to the simulation of electronic transport in semiconductors and semiconductor devices, particularly those which use large computational resources. The workshop was supported by the National Science Foundation (NSF), the Office of Naval Research and the Army Research Office, as well as local support from the Oregon Joint Graduate Schools of Engineering and the Oregon Center for Advanced Technology Education. There were over 100 participants in the Portland workshop, of which more than one quarter represented research groups outside of the United States from Austria, Canada, France, Germany, Italy, Japan, Switzerland, and the United Kingdom. There were a total 81 papers presented at the workshop, 9 invited talks, 26 oral presentations and 46 poster presentations. The emphasis of the contributions reflected the interdisciplinary nature of computational electronics with researchers from the Chemistry, Computer Science, Mathematics, Engineering, and Physics communities participating in the workshop.

Workshop: High-performance coatings for internal combustion engines; Workshop: Hochleistungsschichten fuer Verbrennungsmotoren

Energy Technology Data Exchange (ETDEWEB)

Blau, W. [Foerdergemeinschaft Duenne Schichten e.V., Dresden (Germany). Transferzentrum Oberflaechen- und Schichttechnologie; Lugscheider, E. [Technische Hochschule Aachen (Germany). Lehr- und Forschungsgebiet Werkstoffwissenschaften; Suchentrunk, R. (comps.) [DaimlerChrysler Aerospace AG (Dasa), Muenchen (Germany)

1999-07-01

Progress in vehicles is closely related to progress in materials. Engine components must withstand high thermal, corrosive and mechanical loads. The workshop focused on the coating and boundary layer treatment of components especially of piston engines, although gas turbine technology was gone into as well. [German] Fortschritte in der Verkehrstechnik sind oft eng mit Fortschritten in der Werkstofftechnik verknuepft. Besonders hoch sind die Anforderungen hinsichtlich thermischer, korrosiver und mechanischer Belastbarkeit bei Bauteilen von Verbrennungsmotoren. Der Workshop widmet sich ausschliesslich dem Teilgebiet die Beschichtung und Randschichtbehandlung von Bauteilen. Kolbenmotoren stehen im Mittelpunkt, Querverbindungen zur Gasturbinentechnik werden angesprochen. (orig./AKF)

Replacing Lecture with Peer-led Workshops Improves Student Learning

OpenAIRE

Preszler, Ralph W.

2009-01-01

Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop versio...

Cyanotype: Workshops for people with early dementia

OpenAIRE

Moreno Sáez, María del Carmen; Gutiérrez-Párraga, Teresa; Saavedra Macías, Francisco Javier (Coordinador); Español Nogueiro, Alicia (Coordinador); Arias Sánchez, Samuel (Coordinador); Calderón García, Marina (Coordinador)

2017-01-01

The workshop "Cyanotype: Workshops for people with early dementia", carried out at the 5th International Conference on Health Humanities introduced the cyanotype. The cyanotype is a 19th century photographic technique that the research project used as a way for preventing the decline of faculties of people living with diseases that provoke memory loss. The activities carried out in the cyanotype workshop at the Conference were based on the creation of photographic images that could be interve...

Photovoltaic performance and reliability workshop

Energy Technology Data Exchange (ETDEWEB)

Mrig, L. [ed.

1993-12-01

This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

H2@Scale Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Pivovar, Bryan

2017-03-31

Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stage demonstration activities that can enable hydrogen as an energy carrier at a national scale.

Proceedings of the 1987 coatings for advanced heat engines workshop

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This Workshop was conducted to enhance communication among those involved in coating development for improved heat engine performance and durability. We were fortunate to have Bill Goward review the steady progress and problems encountered along the way in the use of thermal barrier coatings (TBC) in aircraft gas turbine engines. Navy contractors discussed their work toward the elusive goal of qualifying TBC for turbine airfoil applications. In the diesel community, Caterpillar and Cummins are developing TBC for combustion chamber components as part of the low heat rejection diesel engine concept. The diesel engine TBC work is based on gas turbine technology with a goal of more than twice the thickness used on gas turbine engine components. Adoption of TBC in production for diesel engines could justify a new generation of plasma spray coating equipment. Increasing interests in tribology were evident in this Workshop. Coatings have a significant role in reducing friction and wear under greater mechanical loadings at higher temperatures. The emergence of a high temperature synthetic lubricant could have an enormous impact on diesel engine design and operating conditions. The proven coating processes such as plasma spray, electron-beam physical vapor deposition, sputtering, and chemical vapor deposition have shown enhanced capabilities, particularly with microprocessor controls. Also, the newer coating schemes such as ion implantation and cathodic arc are demonstrating intriguing potential for engine applications. Coatings will play an expanding role in higher efficiency, more durable heat engines.

Genetic Engineering Workshop Report, 2010

Energy Technology Data Exchange (ETDEWEB)

Allen, J; Slezak, T

2010-11-03

The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of

Information booklet on personal protective equipment: arm and hand protection

International Nuclear Information System (INIS)

1992-01-01

Fire, heat, cold, electro-magnetic and ionising radiation, electricity, chemicals, impacts, cuts, abrasion, etc. are the common hazards for arms and hands at work. The gloves chosen for protection of the arm and hand should cover those parts adequately and the material of the gloves should be capable of offering protection against the specific hazard involved. Criteria for choosing arm and hand protection equipment will be based on their shape and part of the arm and hand protected. Guide lines for choosing such personal protection equipment for nuclear facilities are given. (M.K.V.). 3 annexures, 1 appendix

Innovations in Equipment Erection of Prototype Fast Breeder Reactor (PFBR)

International Nuclear Information System (INIS)

Sreekanth, S.; Kumar, Prabhat

2013-01-01

• PFBR equipment erection was a challenging task where thin walled vessels had transported and handled with utmost precautions to avoid redial forces on the vessels, which could buckle the vessels. • There was a real challenge in lifting the vessels without swing, placement of large size and heavy vessel at a distance of 57 meters where the crane operator has no line of sight to equipment's being erected. • Lot of care had been taken during lifting, handling and erection of thin walled ODC with innovative methods used for lifting fixtures, guiding arrangements, alignment fixtures and achieved the stringent erection tolerances

Authorisation for work with electrical equipment

CERN Multimedia

Balle, Christoph

2013-01-01

The evaluation of training needs must be conducted by the Group Leader for every employee who could potentially be exposed to an electrical hazard. An analysis must be performed taking into account: • the voltage range (TBT, BT, HTA, HTB) • the type of work to be done (for example, work on a low-voltage line) • the type and the characteristics of the structures, installations and equipment • the type of current (alternating or direct) • the person’s ability to perform the operation

Integrated Glass Coating Manufacturing Line

Energy Technology Data Exchange (ETDEWEB)

Brophy, Brenor [Enki Technology Inc., San Jose, CA (United States)

2015-09-30

This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs and a detailed deployment plan for the equipment.

The Mexican market for electrical equipment and services

International Nuclear Information System (INIS)

Robinson, J.

1994-05-01

Most of Mexico's electric power needs are supplied by the Comision Federal de Electricidad (CFE). Total installed capacity is ca 33,000 MW, of which ca 42% comes from oil-fired generation and 26% hydroelectric. Electricity consumption is expected to grow at ca 6%/y between 1993 and 2000; to meet this demand, CFE plans to build nearly 14,000 MW of additional generating capacity to cost ca $34 billion. A new law governing the electric power sector recently privatized electrical project construction and provided for private financing. Construction of all larger generation and transmission projects has been privatized, thereby deregulating and simplifying the bidding process for Canadian firms wishing to bid, subcontract, or supply equipment or materials. The most notable opportunities for Canadian firms are in transmission projects. The Mexican electrical manufacturing industry comprises ca 2,000 firms employing 150,000 people. Branch plants of global firms plus domestic companies supply over 70% of market demand. Production of equipment and materials for the electrical sector is well integrated with suppliers and customers, and manufacturers are seeking imports to replace abandoned product lines as the industry rationalizes. These, along with more sophisticated equipment not made in Mexico, provide opportunities for Canadian suppliers. The North American Free Trade Agreement gives preference to Canadians over offshore competitors, and eliminates many barriers to exports. Canada's Export Development Corporation provides financing with a line of credit for the electrical sector. Marketing in Mexico is best done through personal visits and capable local representation. A directory of Mexican electrical manufacturers who import is appended. 1 tab

Proceedings and findings of the geothermal commercialization workshop

Energy Technology Data Exchange (ETDEWEB)

Anderson, J.; Dhillon, H.

1979-04-01

The proceedings are presented of a Geothermal Commercialization Workshop conducted by the Division of Geothermal Resource Management, Department of Energy. The workshop was held in January-February 1979 at The MITRE Corporation facility in McLean, Virginia. The workshop addressed geothermal hydrothermal commercialization achievements and needs in the areas of Marketing and Outreach, Economics, Scenarios, and Progress Monitoring.

Collaborative Co-Design for Library Workshops

Science.gov (United States)

Roberts, Regina Lee; Taormina, Mattie

2013-01-01

This article describes a year-long application of critical information literacy theory for social-science-related library workshops. Each of these workshops had a customized section that included working with special collections and university archives. The students who participated ranged from incoming freshman to seniors at Stanford University.…

The Future Workshop: Democratic problem solving

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui

2005-01-01

The origins, principles and practice of a very popular method known as The Future Workshop are presented. The fundamental theory and principles of this method are presented in an introductory way. In addition, practical guidelines to carry out such a workshop are outlined and several types of app...

Mars Exploration Study Workshop II. Report of a workshop, Ames Research Center, Moffett Field, CA (USA), 24 - 25 May 1993.

Science.gov (United States)

Duke, M. B.; Budden, N. A.

1993-11-01

This report, which summarizes the Mars Exploration Study Workshop II, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues.

Basic Stand Alone Medicare DME Line Items PUF

Data.gov (United States)

U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Durable Medical Equipment (DME) Line Items Public Use Files (PUF) with information from Medicare DME claims. The...

Report on the workshop "Decay spectroscopy at CARIBU: advanced fuel cycle applications, nuclear structure and astrophysics". 14-16 April 2011, Argonne National Laboratory, USA.

Energy Technology Data Exchange (ETDEWEB)

Kondev, F.; Carpenter, M.P.; Chowdhury, P.; Clark, J.A.; Lister, C.J.; Nichols, A.L.; Swewryniak, D. (Nuclear Engineering Division); (Univ. of Massachusetts); (Univ. of Surrey)

2011-10-06

A workshop on 'Decay Spectroscopy at CARIBU: Advanced Fuel Cycle Applications, Nuclear Structure and Astrophysics' will be held at Argonne National Laboratory on April 14-16, 2011. The aim of the workshop is to discuss opportunities for decay studies at the Californium Rare Isotope Breeder Upgrade (CARIBU) of the ATLAS facility with emphasis on advanced fuel cycle (AFC) applications, nuclear structure and astrophysics research. The workshop will consist of review and contributed talks. Presentations by members of the local groups, outlining the status of relevant in-house projects and availabile equipment, will also be organized. time will also be set aside to discuss and develop working collaborations for future decay studies at CARIBU. Topics of interest include: (1) Decay data of relevance to AFC applications with emphasis on reactor decay heat; (2) Discrete high-resolution gamma-ray spectroscopy following radioactive decya and related topics; (3) Calorimetric studies of neutron-rich fission framgents using Total ABsorption Gamma-Ray Spectrometry (TAGS) technique; (4) Beta-delayed neutron emissions and related topics; and (5) Decay data needs for nuclear astrophysics.

Proceedings of the CEATI 2010 distribution planning workshop

International Nuclear Information System (INIS)

2010-01-01

This workshop provided a forum for electrical industry distribution experts to discuss methods of distribution planning that will ensure the provision of low-cost and reliable electrical service to present and future customers. Participants in the workshop discussed methods of integrating renewable energy resources, maximizing the use of existing assets, and reducing the carbon footprint of electric utilities. The effects of new loads on reliability, power quality, and voltage stability were considered. Planning distribution system modifications for the future were reviewed. The workshop provided an overview of distribution planning in relation to smart grids. The workshop included sessions on distribution planning for the 21. century; planning for a smarter grid; integrating renewable energy into the distribution system; and planning to manage reliability. The workshop featured 22 presentations, of which 16 have been catalogued separately for inclusion in this database. tabs., figs.

Virtual Workshop

DEFF Research Database (Denmark)

Buus, Lillian; Bygholm, Ann

In relation to the Tutor course in the Mediterranean Virtual University (MVU) project, a virtual workshop “Getting experiences with different synchronous communication media, collaboration, and group work” was held with all partner institutions in January 2006. More than 25 key-tutors within MVU...

The workload analysis in welding workshop

Science.gov (United States)

Wahyuni, D.; Budiman, I.; Tryana Sembiring, M.; Sitorus, E.; Nasution, H.

2018-03-01

This research was conducted in welding workshop which produces doors, fences, canopies, etc., according to customer’s order. The symptoms of excessive workload were seen from the fact of employees complaint, requisition for additional employees, the lateness of completion time (there were 11 times of lateness from 28 orders, and 7 customers gave complaints). The top management of the workshop assumes that employees’ workload was still a tolerable limit. Therefore, it was required workload analysis to determine the number of employees required. The Workload was measured by using a physiological method and workload analysis. The result of this research can be utilized by the workshop for a better workload management.

Arcing phenomena in fusion devices workshop

International Nuclear Information System (INIS)

Clausing, R.E.

1979-01-01

The workshop on arcing phenomena in fusion devices was organized (1) to review the pesent status of our understanding of arcing as it relates to confinement devices, (2) to determine what informaion is needed to suppress arcing and (3) to define both laboratory and in-situ experiments which can ultimately lead to reduction of impurities in the plasma caused by arcing. The workshop was attended by experts in the area of vacuum arc electrode phenomena and ion source technology, materials scientists, and both theoreticians and experimentalists engaged in assessing the importance of unipolar arcing in today's tokamaks. Abstracts for papers presented at the workshop are included

PHEV Market Introduction Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Weber, Adrienne M [ORNL; Sikes, Karen R [ORNL

2009-03-01

The Plug-In Hybrid Electric Vehicle (PHEV) Market Introduction Study Workshop was attended by approximately forty representatives from various stakeholder organizations. The event took place at the Hotel Helix in Washington, D.C. on December 1-2, 2008. The purpose of this workshop was to follow-up last year s PHEV Value Proposition Study, which showed that indeed, a viable and even thriving market for these vehicles can exist by the year 2030. This workshop aimed to identify immediate action items that need to be undertaken to achieve a successful market introduction and ensuing large market share of PHEVs in the U.S. automotive fleet.

2017 Bipolar Plate Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Kopasz, John P. [Argonne National Lab. (ANL), Argonne, IL (United States); Benjamin, Thomas G. [Argonne National Lab. (ANL), Argonne, IL (United States); Schenck, Deanna [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-17

The Bipolar Plate (BP) Workshop was held at USCAR1 in Southfield, Michigan on February 14, 2017 and included 63 participants from industry, government agencies, universities, and national laboratories with expertise in the relevant fields. The objective of the workshop was to identify research and development (R&D) needs, in particular early-stage R&D, for bipolar plates for polymer electrolyte membrane (PEM) fuel cells for transportation applications. The focus of the workshop was on materials, manufacturing, and design aspects of bipolar plates with the goal of meeting DOE’s 2020 bipolar plate targets. Of special interest was the cost target of ≤$3/kW for the bipolar plate.

Third workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P. (eds.)

1977-12-15

The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

Veterinary Immunology Committee Toolkit Workshop 2010: Progress and plans

Science.gov (United States)

The Third Veterinary Immunology Committee (VIC) Toolkit Workshop took place at the Ninth International Veterinary Immunology Symposium (IVIS) in Tokyo, Japan on August 18, 2020. The Workshop built on previous Toolkit Workshops and covered various aspects of reagent development, commercialisation an...

Development of 'SKYSHINE-CG' code. A line-beam method code equipped with combinatorial geometry routine

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, Takahiro; Ochiai, Katsuharu [Plant and System Planning Department, Toshiba Corporation, Yokohama, Kanagawa (Japan); Uematsu, Mikio; Hayashida, Yoshihisa [Department of Nuclear Engineering, Toshiba Engineering Corporation, Yokohama, Kanagawa (Japan)

2000-03-01

A boiling water reactor (BWR) plant has a single loop coolant system, in which main steam generated in the reactor core proceeds directly into turbines. Consequently, radioactive {sup 16}N (6.2 MeV photon emitter) contained in the steam contributes to gamma-ray skyshine dose in the vicinity of the BWR plant. The skyshine dose analysis is generally performed with the line-beam method code SKYSHINE, in which calculational geometry consists of a rectangular turbine building and a set of isotropic point sources corresponding to an actual distribution of {sup 16}N sources. For the purpose of upgrading calculational accuracy, the SKYSHINE-CG code has been developed by incorporating the combinatorial geometry (CG) routine into the SKYSHINE code, so that shielding effect of in-building equipment can be properly considered using a three-dimensional model composed of boxes, cylinders, spheres, etc. Skyshine dose rate around a 500 MWe BWR plant was calculated with both SKYSHINE and SKYSHINE-CG codes, and the calculated results were compared with measured data obtained with a NaI(Tl) scintillation detector. The C/E values for SKYSHINE-CG calculation were scattered around 4.0, whereas the ones for SKYSHINE calculation were as large as 6.0. Calculational error was found to be reduced by adopting three-dimensional model based on the combinatorial geometry method. (author)

Lunar Reconnaissance Orbiter Lunar Workshops for Educators

Science.gov (United States)

Jones, A. P.; Hsu, B. C.; Hessen, K.; Bleacher, L.

2012-12-01

The Lunar Workshops for Educators (LWEs) are a series of weeklong professional development workshops, accompanied by quarterly follow-up sessions, designed to educate and inspire grade 6-12 science teachers, sponsored by the Lunar Reconnaissance Orbiter (LRO). Participants learn about lunar science and exploration, gain tools to help address common student misconceptions about the Moon, find out about the latest research results from LRO scientists, work with data from LRO and other lunar missions, and learn how to bring these data to their students using hands-on activities aligned with grade 6-12 National Science Education Standards and Benchmarks and through authentic research experiences. LWEs are held around the country, primarily in locations underserved with respect to NASA workshops. Where possible, workshops also include tours of science facilities or field trips intended to help participants better understand mission operations or geologic processes relevant to the Moon. Scientist and engineer involvement is a central tenant of the LWEs. LRO scientists and engineers, as well as scientists working on other lunar missions, present their research or activities to the workshop participants and answer questions about lunar science and exploration. This interaction with the scientists and engineers is consistently ranked by the LWE participants as one of the most interesting and inspiring components of the workshops. Evaluation results from the 2010 and 2011 workshops, as well as preliminary analysis of survey responses from 2012 participants, demonstrated an improved understanding of lunar science concepts among LWE participants in post-workshop assessments (as compared to identical pre-assessments) and a greater understanding of how to access and effectively share LRO data with students. Teachers reported increased confidence in helping students conduct research using lunar data, and learned about programs that would allow their students to make authentic

IJCAI-91 Workshop on Objects and Artificial Intelligence

OpenAIRE

Hatzilygeroudis, Ioannis

1994-01-01

The Objects and Artificial Intelligence Workshop was held on 25 August 1991 in conjunction with the 1991 International Joint Conference on Artificial Intelligence. The workshop brought together researchers in AI and object-oriented programming to exchange ideas and investigate possible avenues of cooperation between AI and object-oriented programming. The workshop dealt with both the theoretical and the practical aspects of this cooperation.

The 2010 AOP Workshop Summary Report

Science.gov (United States)

Hooker, Stanford B.; Morrow, John H.; Brown, James W.; Firestone, Elaine R.

2011-01-01

The rationale behind the current workshop, which was hosted by Biospherical Instruments Inc. (BSI), was to update the community and get community input with respect to the following: topics not addressed during the first workshop, specifically the processing of above-water apparent optical property (AOP data) within the Processing of Radiometric Observations of Seawater using Information Technologies (PROSIT) architecture; PROSIT data processing issues that have developed or tasks that have been completed, since the first workshop; and NASA instrumentation developments, both above- and in-water, that are relevant to both workshops and next generation mission planning. The workshop emphasized presentations on new AOP instrumentation, desired and required features for processing above-water measurements of the AOPs of seawater, working group discussions, and a community update for the in-water data processing already present in PROSIT. The six working groups were organized as follows: a) data ingest and data products; b) required and desired features for optically shallow and optically deep waters; c) contamination rejection (clouds), corrections, and data filtering; d) sun photometry and polarimetry; e) instrumentation networks; and f) hyperspectral versus fixed-wavelength sensors. The instrumentation networks working group was intended to provide more detailed information about desired and required features of autonomous sampling systems. Plenary discussions produced a number of recommendations for evolving and documenting PROSIT.

ADVANCES AND CHALLENGES IN SUGARCANE BIOTECHNOLOY AND PLANT PATHOLOGY: A REVIEW OF THE IX PLANT PATHOLOGY WORKSHOP AND VI MOLECULAR BIOLOGY WORKSHOP

Science.gov (United States)

The IX Pathology Workshop and VI Molecular Biology Workshop of the International Society of Sugar Cane Technologists (ISSCT) were organised jointly and hosted by the Colombian Sugarcane Research Centre (CENICAÑA) from 23-27 June 2008 at the Radisson Royal Hotel in Cali, Colombia. The Workshop was we...

Teacher Workshops in the US: Goals, Best Practices and Impact

Science.gov (United States)

Hörst, S. M.

2011-10-01

The goal of the workshop is to educate the teachers on a few focused topics so that they can transfer the knowledge they gain to their students. We will recruit scientists who are attending the meeting to participate in the workshops and will also pair the teachers with scientists in the field who can serve as a resource for the teacher and their class throughout the school year. The scientists can answer questions the teachers may have, be available to do video lectures or interactive question and answer sessions over skype, and work with the teachers to develop hands-on classroom activities. We will partner closely with EPO professionals in NASA's Science Mission Directorate to ensure that best practices for the workshops are employed, including ensuring that the workshop and workshop materials are designed within the framework of the state standards, surveying participating teachers before the workshops about their needs and goals, assessing the participants pre-workshop knowledge, and engaging participants as learners during the workshop [1]. The impact of the workshop will be increased by providing the teachers and students with a scientist who will serve as a long-term resource. We will maintain contact with the teachers after the workshop to ensure that the scientists are still actively engaged in their classroom and to collect feedback. References [1] Shupla C, et al. (2011) Lessons Learned: Best Practices in Educator Workshops. 42nd Lunar and Planetary Science Conference, no. 2828. EPSC Abstracts Vol. 6, EPSC-DPS2011-1775, 2011 EPSC-DPS Joint Meeting 2011 c Author(s) 2011

Supporting Interactive Teaching Methods at the New Faculty Workshop with Astronomy Lecture-Tutorials

Science.gov (United States)

Slater, T. F.; Brissenden, G.; Duestua, S.; Prather, E. E.

2004-05-01

Ongoing research by the Conceptual Astronomy and Physics Education Research (CAPER) Team at the University of Arizona Steward Observatory suggests that, although faculty realize that lecture-based instruction is ineffective for many students, they are not aware of what interactive teaching strategies are available, particularly for large enrollment courses. A major emphasis of the AAPT/AAS New Faculty Workshop was to introduce faculty to effective active-learning strategies based on an understanding of how people learn. Faculty were introduced to think-pair-share methods where students work together to explain difficult concepts to each other. Faculty were also introduced to authentic assessment strategies that go beyond using traditional multiple-choice tests. In particular, faculty were introduced to Lecture-Tutorials for Introductory Astronomy. The Lecture-Tutorials are instructional materials intended for use with collaborative student learning groups and are designed specifically to be easily integrated into existing courses centered on conventional lectures and do not require any outside equipment or a drastic course revision for implementation. The materials are based on research into student beliefs and reasoning difficulties and use effective instructional strategies that center on student learning. Each workshop presentation was complimented by a follow-up small group discussion session.

Summary of the Workshop

International Nuclear Information System (INIS)

Myers, S; Zimmermann, F

2012-01-01

The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

Summary of the Workshop

Energy Technology Data Exchange (ETDEWEB)

Myers, S; Zimmermann, F [European Organization for Nuclear Research, Geneva (Switzerland)

2012-07-01

The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

Mars exploration study workshop 2

Science.gov (United States)

Duke, Michael B.; Budden, Nancy Ann

1993-11-01

A year-long NASA-wide study effort has led to the development of an innovative strategy for the human exploration of Mars. The latest Mars Exploration Study Workshop 2 advanced a design reference mission (DRM) that significantly reduces the perceived high costs, complex infrastructure, and long schedules associated with previous Mars scenarios. This surface-oriented philosophy emphasizes the development of high-leveraging surface technologies in lieu of concentrating exclusively on space transportation technologies and development strategies. As a result of the DRM's balanced approach to mission and crew risk, element commonality, and technology development, human missions to Mars can be accomplished without the need for complex assembly operations in low-Earth orbit. This report, which summarizes the Mars Exploration Study Workshop held at the Ames Research Center on May 24-25, 1993, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues. The three position papers which were generated are included in section three of this publication.

Workshop on automated beam steering and shaping (ABS). Proceedings

Energy Technology Data Exchange (ETDEWEB)

Lindroos, M [ed.

1999-09-10

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Workshop on automated beam steering and shaping (ABS). Proceedings

International Nuclear Information System (INIS)

Lindroos, M.

1999-01-01

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Association EURATOM-CEA contributions on workshops 1995

International Nuclear Information System (INIS)

1995-01-01

Two communications were presented at the 4th IAEA Technical Committee Meeting and Joint US-Japan Workshop on Alpha Particles in Fusion Research. The first one more precisely deal with a new method to compute charged fusion products trajectories and with its application to the detection of 3 MeV protons. As far as the second one is concerned, it focuses on the energy measurement of fast ions trapped in the toroidal field ripple of Tore Supra during ICRF heating. Five communications were presented at the workshop on transport, chaos and plasma physics that took place in Marseilles in July 1995. They include experiments such as the stochastic boundary ones, which showed that an external magnetic perturbation does provide a control of the edge plasma. It is also shown that in a static stochastic magnetic field, magnetic lines experience exponential separation and magnetic diffusion. The radial correlation length of an electrostatic drift wave turbulence is determined analytically in various regimes. It is finally investigated how internal magnetic turbulence reacts to variation of plasma current, density, and radio frequency heating power. Two communications were presented at the 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas which took place in Meudon in August 1995. It describes more precisely the use of X-ray spectroscopy on the Tore Supra Tokamak for plasma diagnostics and atomic physics, as well as the influence of charge exchange reactions on ionization balance and power losses for the same device. (TEC). 74 refs., 55 figs., 2 tabs

Association EURATOM-CEA contributions on workshops 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Two communications were presented at the 4th IAEA Technical Committee Meeting and Joint US-Japan Workshop on Alpha Particles in Fusion Research. The first one more precisely deal with a new method to compute charged fusion products trajectories and with its application to the detection of 3 MeV protons. As far as the second one is concerned, it focuses on the energy measurement of fast ions trapped in the toroidal field ripple of Tore Supra during ICRF heating. Five communications were presented at the workshop on transport, chaos and plasma physics that took place in Marseilles in July 1995. They include experiments such as the stochastic boundary ones, which showed that an external magnetic perturbation does provide a control of the edge plasma. It is also shown that in a static stochastic magnetic field, magnetic lines experience exponential separation and magnetic diffusion. The radial correlation length of an electrostatic drift wave turbulence is determined analytically in various regimes. It is finally investigated how internal magnetic turbulence reacts to variation of plasma current, density, and radio frequency heating power. Two communications were presented at the 5th International Colloquium on Atomic Spectra and Oscillator Strengths for Astrophysical and Laboratory Plasmas which took place in Meudon in August 1995. It describes more precisely the use of X-ray spectroscopy on the Tore Supra Tokamak for plasma diagnostics and atomic physics, as well as the influence of charge exchange reactions on ionization balance and power losses for the same device. (TEC). 74 refs., 55 figs., 2 tabs.

Organic lining materials test in flue gas ducts

International Nuclear Information System (INIS)

Raveh, R.; Sfez, D.; Johannsson, L.

1998-01-01

Corrosion protection solutions are being widely used in electric power plants equipped with Flue Gas Desulfurization (FGD) systems. Organic lining materials are one of many solutions available on the market for corrosion protection. This market segment is found in a continuous development in order to fulfill the severe demands of these materials. The main goal of this test is to obtain information about the high temperature resistance of the materials as occurs when the FGD system is by-passed. Aster initial investigation of this market segment only a few lining materials were found compatible according to their manufacturer data. Seven of these materials were installed in the outlet flue gas duct of the Israeli power station M.D. B. This power station is not equipped with a FGD system, thus it gives a real simulation of the environmental conditions into which the lining material is subjected when the FGD system is by-passed. The materials installation was observed carefully and performed by representatives from the manufacturers in order to avoid material failure due to a non-adequate application. The power station was shut down and the lining materials were inspected three and a half months after the lining materials were applied. The inspection results were good and besides changes in the lining color, most materials did not show any damages. During that time the flue gas temperature at the duct was 134?C except some temperature fluctuations

Workshop on selected aspects of radiochemistry

International Nuclear Information System (INIS)

1991-11-01

The aspects chosen for the workshop are: isotope preparation, separation methods; radiochemical methods and analyses; environmental protection and radiochemistry; the chemistry of the fifth halogen, astatine. From the 28 contributions presented at the workshop, 24 are of relevance in the INIS and EDB scope and are separately retrievable from the database. (BBR) [de

An Equal Employment Opportunity Sensitivity Workshop

Science.gov (United States)

Patten, Thomas H., Jr.; Dorey, Lester E.

1972-01-01

The equal employment opportunity sensitivity workshop seems to be a useful training device for getting an organization started on developing black and white change agents. A report on the establishment of such a workshop at the U.S. Army Tank Automotive Command (TACOM). Includes charts of design, characteristics, analysis of results, program…

The Workshop on Animal Botulism in Europe

DEFF Research Database (Denmark)

Skarin, Hanna; Tevell Åberg, Annica; Woudstra, Cédric

2013-01-01

. Animal botulism is underreported and underdiagnosed, but an increasing number of reports, as well as the information gathered from this workshop, show that it is an emerging problem in Europe. The workshop was divided into 4 sessions: animal botulism in Europe, the bacteria behind the disease, detection...... and diagnostics, and European collaboration and surveillance. An electronic survey was conducted before the workshop to identify the 3 most needed discussion points, which were: prevention, preparedness and outbreak response; detection and diagnostics; and European collaboration and surveillance. The main...

Recent Workshops

CERN Multimedia

Wickens, F. J.

Since the previous edition of ATLAS e-news, the NIKHEF Institute in Amsterdam has hosted not just one but two workshops related to ATLAS TDAQ activities. The first in October was dedicated to the Detector Control System (DCS). Just three institutes, CERN, NIKHEF and St Petersburg, provide the effort for the central DCS services, but each ATLAS sub-detector provides effort for their own controls. Some 30 people attended, including representatives for all of the ATLAS sub-detectors, representatives of the institutes working on the central services and the project leader of JCOP, which brings together common aspects of detector controls across the LHC experiments. During the three-day workshop the common components were discussed, and each sub-detector described their experiences and plans for their future systems. Whilst many of the components to be used are standard commercial components, a key custom item for ATLAS is the ELMB (Embedded Local Monitor Board). Prototypes for this have now been extensively test...

The Halden Reactor Project workshop on HAMMLAB 2000

International Nuclear Information System (INIS)

Sebok, Angelia L.; Grini, Rolf-Einar; Larsen, Marit; Ness, Eyvind; Soerensen, Aimar

1998-01-01

A workshop on HAMMLAB 2000 was organised in Halden, May 26-27, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the design of HAMMLAB 2000 and to discuss the future research agenda. The workshop began with several presentations summarising the status of the current HAMMLAB 2000 project. Three invited speakers with expertise in human-machine laboratories and simulators delivered presentations of their experiences. Later, the workshop was divided into five working groups that discussed the following issues in parallel: (1) Technical Studies, Research Agenda; (2) Human Factors Research Agenda; (3) Data Collection; (4) Synergy with Other Industries; (5) Virtual Reality. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

Competitiveness Improvement Project Informational Workshop

Energy Technology Data Exchange (ETDEWEB)

Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

2018-02-27

This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

The Daresbury On-Line Isotope Separator (DOLIS)

International Nuclear Information System (INIS)

Grant, I.S.; Eastham, D.A.; Groves, J.; Tolfree, D.W.L.; Walker, P.M.; Green, V.R.; Rikovska, J.; Stone, N.J.; Hamilton, W.D.

1987-01-01

The isotope separator DOLIS, which is on-line to the Daresbury Laboratory's 20-MV tandem accelerator, is used to measure nuclear moments and decay schemes. Separated beams may be collected on a tape and transported to a counting station, implanted directly into a host lattice at on-line temperatures down to less than 10 mK, or allowed to interact with a collinear laser beam. The present status of DOLIS and its ancillary equipment is described

The Daresbury on-line isotope separator (DOLIS)

International Nuclear Information System (INIS)

Grant, I.S.; Eastham, D.A.; Groves, J.; Tolfree, D.W.L.; Walker, P.M.; Green, V.R.; Rikovska, J.; Stone, N.J.; Hamilton, W.D.

1987-01-01

The isotope separator DOLIS, which is on-line to the Daresbury Laboratory's 20-MV tandem accelerator, is used to measure nuclear moments and decay schemes. Separated beams may be collected on a tape and transported to a counting station, implanted directly into a host lattice at on-line temperatures down to less than 10 mK, or allowed to interact with a collinear laser beam. The present status of DOLIS and its ancillary equipment is described. (orig.)

This Specialty Line of Clothing Really Is the "Bee's Knees"

Science.gov (United States)

Hollingsworth, Jan Carter

2009-01-01

This article features "Bee's Knees," a specialty line of clothing. While not the typical product one would think of when considering mobility equipment, this line of clothing certainly does aid in helping those with disabilities access their world more safely and comfortably. "Bee's Knees" offers pint-sized pants made of kid-friendly, durable…

Remote handling equipment design for the HEDL fuel supply program

International Nuclear Information System (INIS)

Metcalf, I.L.

1984-09-01

A process line is currently being developed for fabrication of high exposure mixed uranium-plutonium core assemblies. This paper describes the design philosophy, process flow, equipment, and the handling and radiation shielding techniques used for inspection of Fast Flux Test Facility (FFTF) fuel pins and assembly of Driver Fuel Assemblies (DFAs) 6 figures