Life cycle inventory and mass-balance of municipal food waste management systems: Decision support methods beyond the waste hierarchy.

Science.gov (United States)

Edwards, Joel; Othman, Maazuza; Crossin, Enda; Burn, Stewart

2017-11-01

When assessing the environmental and human health impact of a municipal food waste (FW) management system waste managers typically rely on the principles of the waste hierarchy; using metrics such as the mass or rate of waste that is 'prepared for recycling,' 'recovered for energy,' or 'sent to landfill.' These metrics measure the collection and sorting efficiency of a waste system but are incapable of determining the efficiency of a system to turn waste into a valuable resource. In this study a life cycle approach was employed using a system boundary that includes the entire waste service provision from collection to safe end-use or disposal. A life cycle inventory of seven waste management systems was calculated, including the first service wide inventory of FW management through kitchen in-sink disposal (food waste disposer). Results describe the mass, energy and water balance of each system along with key emissions profile. It was demonstrated that the energy balance can differ significantly from its' energy generation, exemplified by mechanical biological treatment, which was the best system for generating energy from waste but only 5 th best for net-energy generation. Furthermore, the energy balance of kitchen in-sink disposal was shown to be reduced because 31% of volatile solids were lost in pre-treatment. The study also confirmed that higher FW landfill diversion rates were critical for reducing many harmful emissions to air and water. Although, mass-balance analysis showed that the alternative end-use of the FW material may still contain high impact pollutants. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Integrated inventory information system

Digital Repository Service at National Institute of Oceanography (India)

Sarupria, J.S.; Kunte, P.D.

The nature of oceanographic data and the management of inventory level information are described in Integrated Inventory Information System (IIIS). It is shown how a ROSCOPO (report on observations/samples collected during oceanographic programme...

End-of-Life Preferences: A Theory-Driven Inventory

Science.gov (United States)

Bonin-Scaon, Sylvie; Munoz Sastre, Maria Teresa; Chasseigne, Gerard; Sorum, Paul C.; Mullet, Etienne

2009-01-01

The study aimed at making a theory-driven inventory of end-of-life preferences. Participants were asked about a variety of preferences representing all eight motivational states described in Apter's Metamotivational Theory (AMT; Apter, 2001). Data from a convenience sample of 965 community participants and a convenience sample of 81 persons…

Clean Lead Facility Inventory System user's manual

International Nuclear Information System (INIS)

Garcia, J.F.

1994-12-01

The purpose of this user's manual is to provide instruction and guidance needed to enter and maintain inventory information for the Clean Lead Facility (CLF), PER-612. Individuals responsible for maintaining and using the system should study and understand the information provided. The user's manual describes how to properly use and maintain the CLF Inventory System. Annual, quarterly, monthly, and current inventory reports may be printed from the Inventory System for reporting purposes. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions. The CLF Inventory System was designed on Microsoft Access version 2.0. Similar inventory systems are in use at the Idaho National Engineering Laboratory (INEL) to facilitate site-wide compilations of mixed waste data. The CLF Inventory System was designed for inventorying the clean or non-radioactive contaminated lead stored at the CLF. This data, along with the mixed waste data, will be compiled into the Idaho Mixed Waste Information (IMWI) system for reporting to the Department of Energy Idaho Office, Department of Energy Headquarters, and/or the State of Idaho

Using imperfect advance demand information in lost-sales inventory systems

NARCIS (Netherlands)

Topan, E.; Tan, T.; van Houtum, G.J.J.A.N.; Dekker, Rommert

Motivated by real-life applications, we consider an inventory system where it is possible to collect information about the quantity and timing of future demand in advance. However, this advance demand information (ADI) is imperfect because (i) it may turn out to be false, (ii) a time interval is

Studying the effect on system preference by varying coproduct allocation in creating life-cycle inventory.

Science.gov (United States)

Curran, Mary Ann

2007-10-15

How one models the input and output data for a life-cycle assessment (LCA) can greatly affect the results. Although much attention has been paid to allocation methodology by researchers in the field, specific guidance is still lacking: Earlier research focused on the effects of applying various allocation schemes to industrial processes when creating life-cycle inventories. To determine the impact of different allocation approaches upon product choice, this study evaluated the gas- and water-phase emissions during the production, distribution, and use of three hypothetical fuel systems (data that represent conventional gasoline and gasoline with 8.7 and 85% ethanol were used as the basis for modeling). This paper presents an explanation of the allocation issue and the results from testing various allocation schemes (weight, volume, market value, energy, and demand-based) when viewed across the entire system. Impact indicators for global warming, ozone depletion, and human health noncancer (water impact) were lower for the ethanol-containing fuels, while impact indicators for acidification, ecotoxicity, eutrophication, human health criteria, and photochemical smog were lower for conventional gasoline (impacts for the water-related human health cancer category showed mixed results). The relative ranking of conventional gasoline in relation to the ethanol-containing fuels was consistent in all instances, suggesting that, in this case study, the choice of allocation methodology had no impact on indicating which fuel has lower environmental impacts.

Experimental inventory verification system

International Nuclear Information System (INIS)

Steverson, C.A.; Angerman, M.I.

1991-01-01

As Low As Reasonably Achievable (ALARA) goals and Department of Energy (DOE) inventory requirements are frequently in conflict at facilities across the DOE complex. The authors wish, on one hand, to verify the presence of correct amounts of nuclear materials that are in storage or in process; yet on the other hand, we wish to achieve ALARA goals by keeping individual and collective exposures as low as social, technical, economic, practical, and public policy considerations permit. The Experimental Inventory Verification System (EIVSystem) is a computer-based, camera-driven system that utilizes image processing technology to detect change in vault areas. Currently in the test and evaluation phase at Idaho National Engineering Laboratory, this system guards personnel. The EIVSystem continually monitors the vault, providing proof of changed status for objects sorted within the vault. This paper reports that these data could provide the basis for reducing inventory requirements when no change has occurred, thus helping implement ALARA policy; the data will also help describe there target area of an inventory when change has been shown to occur

Life-Cycle Inventory Analysis of Manufacturing Redwood Decking

Science.gov (United States)

Richard D. Bergman; Han-Sup Han; Elaine Oneil; Ivan L. Eastin

2012-01-01

Green building has become increasingly important. Therefore, consumers and builders often take into account the environmental attributes of a building material. This study determined the environmental attributes associated with manufacturing 38-mm × 138-mm (nominal 2 × 6) redwood decking in northern California using the life-cycle inventory method. Primary data...

Designing Intelligent Secure Android Application for Effective Chemical Inventory

Science.gov (United States)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Mobile services support various situations in everyday life and with the increasing sophistication of phone functions, the daily life is much more easier and better especially in term of managing tools and apparatus. Since chemical inventory management system has been experiencing a new revolution from antiquated to an automated inventory management system, some additional features should be added in current chemical inventory system. Parallel with the modern technologies, chemical inventory application using smart phone has been developed. Several studies about current related chemical inventory management using smart phone application has been done in this paper in order to obtain an overview on recent studies in smartphone application for chemical inventory system which are needed in schools, universities or other education institutions. This paper also discuss about designing the proposed secure mobile chemical inventory system. The study of this paper can provide forceful review analysis support for the chemical inventory management system related research.

How can a life cycle inventory parametric model streamline life cycle assessment in the wooden pallet sector?

DEFF Research Database (Denmark)

Niero, Monia; Di Felice, Francesco; Ren, Jingzheng

2014-01-01

, as the information required for fulfilling the LCI are standard information about the features of the wooden pallet and its manufacturing process. The contribution analysis on the reference product revealed that the most contributing life cycle stages are wood and nails extraction and manufacturing (positive value......This study discusses the use of parameterization within the life cycle inventory (LCI) in the wooden pallet sector, in order to test the effectiveness of LCI parametric models to calculate the environmental impacts of similar products. Starting from a single case study, the objectives of this paper......; these correlations can be used to improve the design of new wooden pallets.The conceptual scheme for defining the model is based on ISO14040-44 standards. First of all, the product system was defined identifying the life cycle of a generic wood pallet, as well as its life cycle stages. A list of independent...

Demand differentiation in inventory systems

NARCIS (Netherlands)

Kleijn, M.J.

1998-01-01

This book deals with inventory systems where customer demand is categorised into different classes. Most inventory systems do not take into account individual customer preferences for a given product, and therefore handle all demand in a similar way. Nowadays, market segmentation has become a

Savannah River Plant's Accountability Inventory Management System (AIMS) (Nuclear materials inventory control)

International Nuclear Information System (INIS)

Croom, R.G.

1976-06-01

The Accountability Inventory Management System (AIMS) is a new computer inventory control system for nuclear materials at the Savannah River Plant, Aiken, South Carolina. The system has two major components, inventory files and system parameter files. AIMS, part of the overall safeguards program, maintains an up-to-date record of nuclear material by location, produces reports required by ERDA in addition to onplant reports, and is capable of a wide range of response to changing input/output requirements through use of user-prepared parameter cards, as opposed to basic system reprogramming

EFO-LCI: A New Life Cycle Inventory Database of Forestry Operations in Europe

Science.gov (United States)

Cardellini, Giuseppe; Valada, Tatiana; Cornillier, Claire; Vial, Estelle; Dragoi, Marian; Goudiaby, Venceslas; Mues, Volker; Lasserre, Bruno; Gruchala, Arkadiusz; Rørstad, Per Kristian; Neumann, Mathias; Svoboda, Miroslav; Sirgmets, Risto; Näsärö, Olli-Pekka; Mohren, Frits; Achten, Wouter M. J.; Vranken, Liesbet; Muys, Bart

2018-06-01

Life cycle assessment (LCA) has become a common methodology to analyze environmental impacts of forestry systems. Although LCA has been widely applied to forestry since the 90s, the LCAs are still often based on generic Life Cycle Inventory (LCI). With the purpose of improving LCA practices in the forestry sector, we developed a European Life Cycle Inventory of Forestry Operations (EFO-LCI) and analyzed the available information to check if within the European forestry sector national differences really exist. We classified the European forests on the basis of "Forest Units" (combinations of tree species and silvicultural practices). For each Forest Unit, we constructed the LCI of their forest management practices on the basis of a questionnaire filled out by national silvicultural experts. We analyzed the data reported to evaluate how they vary over Europe and how they affect LCA results and made freely available the inventory data collected for future use. The study shows important variability in rotation length, type of regeneration, amount and assortments of wood products harvested, and machinery used due to the differences in management practices. The existing variability on these activities sensibly affect LCA results of forestry practices and raw wood production. Although it is practically unfeasible to collect site-specific data for all the LCAs involving forest-based products, the use of less generic LCI data of forestry practice is desirable to improve the reliability of the studies. With the release of EFO-LCI we made a step toward the construction of regionalized LCI for the European forestry sector.

Study of Intelligent Secure Chemical Inventory Management System

Science.gov (United States)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Chemical inventory management system has been experiencing a new revolution from traditional inventory system which is manual to an automated inventory management system. In this paper, some review of the classic and modern approaches to chemical inventory management system has been discussed. This paper also describe about both type of inventory management. After a comparative analysis of the traditional method and automated method, it can be said that both methods have some distinctive characteristics. Moreover, the automated inventory management method has higher accuracy of calculation because the calculations are handled by software, eliminating possible errors and saving time. The automated inventory system also allows users and administrators to track the availability, location and consumption of chemicals. The study of this paper can provide forceful review analysis support for the chemical inventory management related research.

On Inventory Control For Perishable Inventory Systems Subject To Uncertainties On Customer Demands

OpenAIRE

Abbou , Rosa; Loiseau , Jean-Jacques; Khaldi , Hajer; Farraa , Berna ,

2017-01-01

International audience; This paper deals with the inventory controller design for constrained production systems subject to uncertainties on the customer demands. The case study focuses on the inventory regulation problem in production systems where contain perishable finite products. Such systems are characterized by the presence of delays due to production processes, and constraints from the instantaneous inventory level, production level and the finite capacities of stocks. To do that, we ...

A two-commodity perishable inventory system

Directory of Open Access Journals (Sweden)

B Sivakumar

2005-12-01

Full Text Available We present a two-commodity perishable stochastic inventory system under continuous review at a service facility with a finite waiting room. The maximum storage capacity for the i–th item is fixed as Si (i = 1, 2. We assume that a demand for the i–th commodity is of unit size. The arrival instants of customers to the service station constitutes a Poisson process with parameter lambda. The customer demands for these commodities are assumed to be in the ratio p1:p2. An individual customer is issued a demanded item after a random time of service with a negative exponential distribution. The items are perishable in nature and the life time of items of each commodity is assumed to be exponentially distributed. Both commodities are supposed to be substitutable in the sense that at the instant of any zero-stock, the other item may be used to meet the demand. A joint reordering policy is adopted with a random lead time for orders with exponential distribution. The joint probability distribution of the number of customers in the system and the inventory levels are obtained in both the transient and steady states. We also derive some stationary performance measures. The results are illustrated by means of a numerical example.

Periodic inventory system in cafeteria using linear programming

Science.gov (United States)

Usop, Mohd Fais; Ishak, Ruzana; Hamdan, Ahmad Ridhuan

2017-11-01

Inventory management is an important factor in running a business. It plays a big role of managing the stock in cafeteria. If the inventories are failed to be managed wisely, it will affect the profit of the cafeteria. Therefore, the purpose of this study is to find the solution of the inventory management in cafeteria. Most of the cafeteria in Malaysia did not manage their stock well. Therefore, this study is to propose a database system of inventory management and to develop the inventory model in cafeteria management. In this study, new database system to improve the management of the stock in a weekly basis will be provided using Linear Programming Model to get the optimal range of the inventory needed for selected categories. Data that were collected by using the Periodic Inventory System at the end of the week within three months period being analyzed by using the Food Stock-take Database. The inventory model was developed from the collected data according to the category of the inventory in the cafeteria. Results showed the effectiveness of using the Periodic Inventory System and will be very helpful to the cafeteria management in organizing the inventory. Moreover, the findings in this study can reduce the cost of operation and increased the profit.

Thermal effect of periodical bakeout on tritium inventory in first wall and permeation to coolant in reactor life

International Nuclear Information System (INIS)

Nakahara, Katsuhiko

1989-01-01

In view of safety, it is very important to control the tritium inventory in first walls and permeation to the coolant. A time-dependent diffusion and temperature calculation code, TPERM, was developed. Using this code, a numerical study on the long term effects of the bakeout temperature on tritium inventory and tritium permeation to the coolant was made. In this study, an FER type first wall (stainless steel) was considered and a cyclic operation (one cycle includes a plasma burn phase and a bakeout phase) was assumed. The results are as follows: (i) There is almost no difference in the tritium inventory in the first wall between the operation with 150 0 C-bakeout and the continuous burning operation (without bakeout). In both cases there is not tritium permeation to the coolant at 5 years' integrated burn time. The 150 0 C-bakeout is effective to release tritium in the surface (to 0.1 mm depth) region on the plasma side, but it is not effective to decrease the tritium inventory over the reactor life. (ii) To decrease the tritium inventory, a bakeout at a temperature higher than 150 0 C is necessary. But a high temperature bakeout causes earlier tritium permeation to the coolant. (iii) From these results it is suggested that the decrease the tritium inventory over the reactor life by bakeout, some form of protection against tritium permeation or a decontamination device in the cooling (or bakeout) system becomes necessary. (orig.)

Balancing flexibility and inventory in repair inventory systems

NARCIS (Netherlands)

Haas, de H.F.M.; Martin, H.H.

1995-01-01

In repair inventory systems, failed units are exchanged for serviceable units upon failure. The probability that serviceable units are available to support the exchange process can be used as a measure for the performance of the system. This measure is commonly called the expected fill rate. The

Coupling Computer-Aided Process Simulation and Estimations of Emissions and Land Use for Rapid Life Cycle Inventory Modeling

Science.gov (United States)

A methodology is described for developing a gate-to-gate life cycle inventory (LCI) of a chemical manufacturing process to support the application of life cycle assessment in the design and regulation of sustainable chemicals. The inventories were derived by first applying proces...

Environmental impact of producing hardwood lumber using life-cycle inventory

Science.gov (United States)

Richard D. Bergman; S.A. Bowe

2007-01-01

Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Showing wood products as green building materials is vital for the long-term productivity of the wood building industry. This study examined hardwood lumber manufacturing using Life-Cycle Inventory...

Life-cycle inventory of manufacturing hardwood lumber in Southeastern US

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2012-01-01

Environmental impacts associated with the building industry have become of increasing importance. Materials and energy consumed during manufacture of building materials such as lumber affect a building’s environmental performance. This study determined environmental impacts of manufacturing hardwood lumber in the southeastern US using the life-cycle inventory method....

Life cycle inventory of oil palm lumber production: A gate-to-gate case study

Science.gov (United States)

Shamsudin, Noor Ainna; Sahid, Ismail; Mokhtar, Anis; Muhamad, Halimah; Ahmad, Shamim

2018-04-01

Life Cycle Assessment (LCA) has been applied in the Malaysian oil palm industry since 2010. It is important to ensure that this main industry is ready to meet the demands and expectations of European market on the environmental performance of the oil palm industry. In addition, oil palm biomass, especially oil palm trunk (OPT) are abundantly available after replanting every year. In order to maximize the usage of OPT as a green product, it can be converted to palm lumber as a value-added product. Palm lumber act as a basis product from OPT before it is converted to panel product such as plywood, sandwich board and so on. However, the LCA study on palm lumber production is still scarce in Malaysia. Hence, this paper aims to perform and collect the inventory data for palm lumber production, which is known as Life Cycle Inventory (LCI). A gate-to-gate system boundary and the functional unit of 1 m3 of palm lumber produced have been used in this study. This inventory data was collected from three batches of the production cycle. The inputs are mainly the raw materials which are the OPT and the energy from diesel and electricity from the grid. Generally, each consumption of input such as energy and fossil fuel were different at each stage of palm lumber production. Kiln-drying represents a prominent stage in terms of energy consumption, which electrical use in the dryer represents 94% of total electrical grid consumption as compared to another stage of palm lumber production. By adding the inventory information especially in the downstream sector of biomass industry, hopefully it can improve the sustainability of oil palm industry in Malaysia.

Life cycle inventory modeling of phosphorus substitution, losses and crop uptake after land application of organic waste products

DEFF Research Database (Denmark)

Ten Hoeve, Marieke; Bruun, Sander; Naroznova, Irina

2017-01-01

of this study was to develop a relatively easy to use life cycle inventory model, known as PLCI, that could be used to estimate these values. Methods: A life cycle inventory model for P was developed, which estimates the effect of an application of organic waste followed by ordinary fertilizer management...

Logistics and Inventory System -

Data.gov (United States)

Department of Transportation — The Logistics and Inventory System (LIS) is the agencys primary supply/support automation tool. The LIS encompasses everything from order entry by field specialists...

Biomass energy inventory and mapping system

Energy Technology Data Exchange (ETDEWEB)

Kasile, J.D. [Ohio State Univ., Columbus, OH (United States)

1993-12-31

A four-stage biomass energy inventory and mapping system was conducted for the entire State of Ohio. The product is a set of maps and an inventory of the State of Ohio. The set of amps and an inventory of the State`s energy biomass resource are to a one kilometer grid square basis on the Universal Transverse Mercator (UTM) system. Each square kilometer is identified and mapped showing total British Thermal Unit (BTU) energy availability. Land cover percentages and BTU values are provided for each of nine biomass strata types for each one kilometer grid square. LANDSAT satellite data was used as the primary stratifier. The second stage sampling was the photointerpretation of randomly selected one kilometer grid squares that exactly corresponded to the LANDSAT one kilometer grid square classification orientation. Field sampling comprised the third stage of the energy biomass inventory system and was combined with the fourth stage sample of laboratory biomass energy analysis using a Bomb calorimeter and was then used to assign BTU values to the photointerpretation and to adjust the LANDSAT classification. The sampling error for the whole system was 3.91%.

A new tool for life cycle inventories of agricultural machinery operations

Directory of Open Access Journals (Sweden)

Daniela Lovarelli

2016-03-01

Full Text Available The interest in environmental assessments about agricultural processes is fast growing and asking for new tools for accurate impact evaluations. The methodology commonly used to go through these studies is the life cycle assessment, of which the inventory phase (life cycle inventory, LCI is an essential step. For studies focusing on agricultural productions, the completion of LCI is particularly complex: taking into account the pedo-climatic and mechanical operative variability is evidently difficult. However, the prediction of the environmental impact of mechanical operations caused by the agricultural sector is essential to quantify the impact categories for which it is responsible. A new tool, ENVIAM, was developed to complete LCI to guarantee the availability of local data that describe the mechanical and pedo-climatic conditions occurring in the Po Valley area and widely applicable as well. It calculates mechanical power requests, directly consumed inputs (i.e., fuel, lubricant and material consumption of a productive system by taking into account soil texture, specific machinery operations and coupling solutions as defined by the user. A subdivision of working time and defined engine load have been considered to calculate fuel consumption; with regard to outputs, exhaust gases emissions from internal combustion engines have been assessed by evaluating the emissive stages of belonging as stated by the EU Directive. A case study was also performed to highlight the differences that occur when an analysis is fulfilled in a context with features different from the average, and resulted in significant variations for the inventory. In more details, a comparison was carried out both with Ecoinvent database and within ENVIAM. With regard to fuel consumption, by changing the soil texture, the analysis showed a range between 64%-184% for sandy and clay soils, respectively, if compared with medium texture ones. With this tool, local contexts defined

Process integrated modelling for steelmaking Life Cycle Inventory analysis

International Nuclear Information System (INIS)

Iosif, Ana-Maria; Hanrot, Francois; Ablitzer, Denis

2008-01-01

During recent years, strict environmental regulations have been implemented by governments for the steelmaking industry in order to reduce their environmental impact. In the frame of the ULCOS project, we have developed a new methodological framework which combines the process integrated modelling approach with Life Cycle Assessment (LCA) method in order to carry out the Life Cycle Inventory of steelmaking. In the current paper, this new concept has been applied to the sinter plant which is the most polluting steelmaking process. It has been shown that this approach is a powerful tool to make the collection of data easier, to save time and to provide reliable information concerning the environmental diagnostic of the steelmaking processes

Biogenic Emission Inventory System (BEIS)

Science.gov (United States)

Biogenic Emission Inventory System (BEIS) estimates volatile organic compound (VOC) emissions from vegetation and nitric oxide (NO) emission from soils. Recent BEIS development has been restricted to the SMOKE system

Networked inventory management systems: materializing supply chain management

NARCIS (Netherlands)

Verwijmeren, M.A.A.P.; Vlist, van der P.; Donselaar, van K.H.

1996-01-01

Aims to explain the driving forces for networked inventory management. Discusses major developments with respect to customer requirements, networked organizations and networked inventory management. Presents high level specifications of networked inventory management information systems (NIMISs).

Representativeness of environmental impact assessment methods regarding Life Cycle Inventories.

Science.gov (United States)

Esnouf, Antoine; Latrille, Éric; Steyer, Jean-Philippe; Helias, Arnaud

2018-04-15

Life Cycle Assessment (LCA) characterises all the exchanges between human driven activities and the environment, thus representing a powerful approach for tackling the environmental impact of a production system. However, LCA practitioners must still choose the appropriate Life Cycle Impact Assessment (LCIA) method to use and are expected to justify this choice: impacts should be relevant facing the concerns of the study and misrepresentations should be avoided. This work aids practitioners in evaluating the adequacy between the assessed environmental issues and studied production system. Based on a geometrical standpoint of LCA framework, Life Cycle Inventories (LCIs) and LCIA methods were localized in the vector space spanned by elementary flows. A proximity measurement, the Representativeness Index (RI), is proposed to explore the relationship between those datasets (LCIs and LCIA methods) through an angular distance. RIs highlight LCIA methods that measure issues for which the LCI can be particularly harmful. A high RI indicates a close proximity between a LCI and a LCIA method, and highlights a better representation of the elementary flows by the LCIA method. To illustrate the benefits of the proposed approach, representativeness of LCIA methods regarding four electricity mix production LCIs from the ecoinvent database are presented. RIs for 18 LCIA methods (accounting for a total of 232 impact categories) were calculated on these LCIs and the relevance of the methods are discussed. RIs prove to be a criterion for distinguishing the different LCIA methods and could thus be employed by practitioners for deeper interpretations of LCIA results. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of Inventory Optimization System for Operation Nuclear Plants

Energy Technology Data Exchange (ETDEWEB)

Jang, Se-Jin; Park, Jong-Hyuk; Yoo, Sung-Soo; Lee, Sang-Guk [Korea Electric Power Research Institutes, Taejon (Korea, Republic of)

2006-07-01

Inventory control of spare parts plays an increasingly important role in operation management. This is why inventory management systems such as manufacturing resources planning(MRP) and enterprise resource planning(ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations. Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. We developed the inventory optimization system for Operation Nuclear Plants to resolve these problems. In this paper, we report a data flow process, data load and inventory calculation process. The main contribution of this paper is development of inventory optimization system which can be used in domestic power plants.

Development of Inventory Optimization System for Operation Nuclear Plants

International Nuclear Information System (INIS)

Jang, Se-Jin; Park, Jong-Hyuk; Yoo, Sung-Soo; Lee, Sang-Guk

2006-01-01

Inventory control of spare parts plays an increasingly important role in operation management. This is why inventory management systems such as manufacturing resources planning(MRP) and enterprise resource planning(ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations. Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. We developed the inventory optimization system for Operation Nuclear Plants to resolve these problems. In this paper, we report a data flow process, data load and inventory calculation process. The main contribution of this paper is development of inventory optimization system which can be used in domestic power plants

Comparative analysis of the life cycle impact assessment of available cement inventories in the EU

International Nuclear Information System (INIS)

Josa, Alejandro; Aguado, Antonio; Cardim, Arnaldo; Byars, Ewan

2007-01-01

Life cycle impact assessment (LCIA) is one of basic steps in life cycle assessment methodology (LCA). This paper presents a comparative study of the LCIA of different life cycle inventories (LCI) for EU cements. The analysis unit used is the manufacture of 1 kg of cement, from 'cradle to gate'. The impact categories considered are those resulting from the manufacture of cement and include greenhouse effects, acidification, eutrophication and summer and winter smog, amongst others. The results of the study highlighted some inconsistencies in existing inventories. As for the LCIA, the main environmental interventions related to cement manufacture were classified and characterised and their effect on different impact categories analysed. Differences observed in evaluation of the impact of cement type were essentially related to their clinker content

Toward Automated Inventory Modeling in Life Cycle Assessment: The Utility of Semantic Data Modeling to Predict Real-WorldChemical Production

Science.gov (United States)

A set of coupled semantic data models, i.e., ontologies, are presented to advance a methodology towards automated inventory modeling of chemical manufacturing in life cycle assessment. The cradle-to-gate life cycle inventory for chemical manufacturing is a detailed collection of ...

Inventory estimation for nuclear fuel reprocessing systems

International Nuclear Information System (INIS)

Beyerlein, A.L.; Geldard, J.F.

1987-01-01

The accuracy of nuclear material accounting methods for nuclear fuel reprocessing facilities is limited by nuclear material inventory variations in the solvent extraction contactors, which affect the separation and purification of uranium and plutonium. Since in-line methods for measuring contactor inventory are not available, simple inventory estimation models are being developed for mixer-settler contactors operating at steady state with a view toward improving the accuracy of nuclear material accounting methods for reprocessing facilities. The authors investigated the following items: (1) improvements in the utility of the inventory estimation models, (2) extension of improvements to inventory estimation for transient nonsteady-state conditions during, for example, process upset or throughput variations, and (3) development of simple inventory estimation models for reprocessing systems using pulsed columns

An Analysis of the Impact of RFID Technology on Inventory Systems

Science.gov (United States)

Rekik, Yacine

Nowadays, most enterprises undertake large investments in order to implement information systems that support decision making for managing inventories. Nevertheless, if data collected from the physical processes used to feed these systems are not correct, there will be severe impacts on business performance. Inventory inaccuracy occurs when the inventory level in the Information System is not in agreement with the physically available inventory. In this chapter, we first describe the major factors generating inventory inaccuracy. Then, we provide situations permitting to manage an inventory system subject to errors. We provide a framework to model the inventory inaccuracy issue and focus on the impact of advanced identification systems, such as that provided by RFID technology, in improving the performance of a supply chain subject to inventory inaccuracies.

Development of a Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Duncan, D.; S, C. A. T.

2009-01-01

Concept inventories can provide useful insight into students’ understanding of key physical concepts. Knowing what your students have learned during a course is a valuable tool for improving your own teaching. Unfortunately, current astronomy concept inventories are not suitable for an introductory solar system course because they either cover too broad of a range of topics (e.g. Astronomy Diagnostic Test) or are too narrowly focused (e.g. Greenhouse Effect Concept Inventory, Lunar Phase Concept Inventory). We have developed the Solar System Concept Inventory (SSCI) to cover those topics commonly taught in an introductory solar system course. The topics included on the SSCI were selected by having faculty identify the key concepts they address when teaching about the solar system. SSCI topics include formation mechanisms, planetary interiors, atmospheric effects, and small solar system bodies. Student interviews were conducted to identify common naive ideas and reasoning difficulties relating to these key topics. Preliminary development of the SSCI was completed at the University of Colorado and involved over 400 students. A larger, national, multi-institutional field test is planned for Spring 2009 as a Collaboration of Astronomy Teaching Scholars (CATS) research project. We present here the results from the preliminary development and proposed changes for the next stage of research. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

Development of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, S.; Prather, E.

2009-12-01

Concept inventories can provide useful insight into students’ understanding of key physical concepts. Knowing what your students have learned during a course is a valuable tool for improving your own teaching. Unfortunately, current astronomy concept inventories are not suitable for an introductory solar system course because they either cover too broad of a range of topics (e.g. Astronomy Diagnostic Test) or are too narrowly focused (e.g. Greenhouse Effect Concept Inventory, Lunar Phase Concept Inventory). We have developed the Solar System Concept Inventory (SSCI) to cover those topics commonly taught in an introductory solar system course. The topics included on the SSCI were selected by having faculty identify the key concepts they address when teaching about the solar system. SSCI topics include formation mechanisms, planetary interiors, atmospheric effects, and small solar system bodies. Student interviews were conducted to identify common naive ideas and reasoning difficulties relating to these key topics. The SSCI has been through two semesters of national, multi-institutional field-testing, involving over 1500 students. After the first semester of testing, question statistics were used to flag ineffective questions and flagged questions were revised or eliminated. We will present an overall outline of the SSCI development as well as our question-flagging criteria and question analyses from the latest round of field-testing. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

NREL: U.S. Life Cycle Inventory Database - About the LCI Database Project

Science.gov (United States)

About the LCI Database Project The U.S. Life Cycle Inventory (LCI) Database is a publicly available database that allows users to objectively review and compare analysis results that are based on similar source of critically reviewed LCI data through its LCI Database Project. NREL's High-Performance

Real-time plutonium accountability and inventory control system

International Nuclear Information System (INIS)

Sarich, J.P.

An on-line inventory system for a large storage and processing facility is planned. A terminal system will provide for interactive updating and information retrieval. The data base will contain information on inventory items and transactions, as well as process monitoring information and laboratory bookkeeping data. Access to the terminals, as well as the storage vaults, will be controlled by fingerprint comparison with a personnel identification data base. Bar code labels attached to each inventory item will be read by a light pen during physical inventories and when materials are transferred. The use of devices to continuously monitor and control storage locations within the vaults is planned. (U.S.)

Real-time plutonium accountability and inventory control system

International Nuclear Information System (INIS)

Sarich, J.P.

1975-01-01

An on-line inventory system for a large storage and processing facility is planned. A terminal system will provide for interactive updating and information retrieval. The data base will contain information on inventory items and transactions, as well as process monitoring information and laboratory bookkeeping data. Access to the terminals, as well as the storage vaults, will be controlled by fingerprint comparison with a personnel identification data base. Bar code labels attached to each inventory item will be read by a light pen during physical inventories and when material is transferred. The use of devices to continuously monitor and control s locations within the vaults is planned

19 CFR 146.93 - Inventory control and recordkeeping system.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Inventory control and recordkeeping system. 146.93... § 146.93 Inventory control and recordkeeping system. (a) Attribution. All final products removed from or... provided for under § 146.95(b) of this subpart. (3) Other inventory method. An operator may use the FIFO...

30 CFR 764.21 - Data base and inventory system requirements.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Data base and inventory system requirements... SURFACE COAL MINING OPERATIONS § 764.21 Data base and inventory system requirements. (a) The regulatory authority shall develop a data base and inventory system which will permit evaluation of whether reclamation...

Data Exchange Inventory System for Telecommunications and Systems Operations (DEXI-OTSO)

Data.gov (United States)

Social Security Administration — This Data Exchange Inventory (DEXI) for the Office of Telecommunications and System Operations, (OTSO) Network Troubleshooting is a browser-based inventory database...

Development of a SaaS Inventory Management System

OpenAIRE

Loizides, Antonis

2013-01-01

The objective of this research is to develop a Software as a Service web application and more specifically an Inventory Management System for Caterpro Ltd. The aim of this web application is to provide the basic tool for tracking as well as monitoring sales and inventory to individuals and small businesses who cannot afford the investment of a complete dedicated Inventory Management System. Moreover, this research will used for various purposes all the necessary components as well as steps re...

Spare parts inventory control under system availability constraints

NARCIS (Netherlands)

Houtum, van G.J.J.A.N.; Kranenburg, A.A.

2015-01-01

This book focuses on the tactical planning level for spare parts management. It describes a series of multi-item inventory models and presents exact and heuristic optimization methods, including greedy heuristics that work well for real, life-sized problems. The intended audience consists of

Inventory management systems : Control and information issues

NARCIS (Netherlands)

Janssen, F.B.S.L.P.

1998-01-01

This dissertation addresses the management of inventory systems. The thesis starts with an exposition on mathematical models that can be used in inventory theory. Then we deal with some information issues related to the demand process. Namely, how to control products that have intermittent demand.

Optoelectronic inventory system for special nuclear material

International Nuclear Information System (INIS)

Sieradzki, F.H.

1994-01-01

In support of the Department of Energy's Dismantlement Program, the Optoelectronics Characterization and Sensor Development Department 2231 at Sandia National Laboratories/New Mexico has developed an in situ nonintrusive Optoelectronic Inventory System (OIS) that has the potential for application wherever periodic inventory of selected material is desired. Using a network of fiber-optic links, the OIS retrieves and stores inventory signatures from data storage devices (which are permanently attached to material storage containers) while inherently providing electromagnetic pulse immunity and electrical noise isolation. Photovoltaic cells (located within the storage facility) convert laser diode optic power from a laser driver to electrical energy. When powered and triggered, the data storage devices sequentially output their digital inventory signatures through light-emitting diode/photo diode data links for retrieval and storage in a mobile data acquisition system. An item's exact location is determined through fiber-optic network and software design. The OIS provides an on-demand method for obtaining acceptable inventory reports while eliminating the need for human presence inside the material storage facility. By using modularization and prefabricated construction with mature technologies and components, an OIS installation with virtually unlimited capacity can be tailored to the customer's requirements

TFTR tritium inventory accountability system

International Nuclear Information System (INIS)

Saville, C.; Ascione, G.; Elwood, S.; Nagy, A.; Raftopoulos, S.; Rossmassler, R.; Stencel, J.; Voorhees, D.; Tilson, C.

1995-01-01

This paper discusses the program, PPPL (Princeton Plasma Physics Laboratory) Material Control and Accountability Plan, that has been implemented to track US Department of Energy's tritium and all other accountable source material. Specifically, this paper details the methods used to measure tritium in various systems at the Tokamak Fusion Test Reactor; resolve inventory differences; perform inventory by difference inside the Tokamak; process and measure plasma exhaust and other effluent gas streams; process, measure and ship scrap or waste tritium on molecular sieve beds; and detail organizational structure of the Material Control and Accountability group. In addition, this paper describes a Unix-based computerized software system developed at PPPL to account for all tritium movements throughout the facility. 5 refs., 2 figs

Development of the Supported Decision Making Inventory System.

Science.gov (United States)

Shogren, Karrie A; Wehmeyer, Michael L; Uyanik, Hatice; Heidrich, Megan

2017-12-01

Supported decision making has received increased attention as an alternative to guardianship and a means to enable people with intellectual and developmental disabilities to exercise their right to legal capacity. Assessments are needed that can used by people with disabilities and their systems of supports to identify and plan for needed supports to enable decision making. This article describes the steps taken to develop such an assessment tool, the Supported Decision Making Inventory System (SDMIS), and initial feedback received from self-advocates with intellectual disability. The three sections of the SDMIS (Supported Decision Making Personal Factors Inventory, Supported Decision Making Environmental Demands Inventory, and Decision Making Autonomy Inventory) are described and implications for future research, policy, and practice are discussed.

Integrated waste management and the tool of life cycle inventory : a route to sustainable waste management

Energy Technology Data Exchange (ETDEWEB)

McDougall, F.R.; White, P.R. [Procter and Gamble Newcastle Technical Centre, Newcastle (United Kingdom). Corporate Sustainable Development

2000-07-01

An overall approach to municipal waste management which integrates sustainable development principles was discussed. The three elements of sustainability which have to be balanced are environmental effectiveness, economic affordability and social acceptability. An integrated waste management (IWM) system considers different treatment options and deals with the entire waste stream. A life cycle inventory (LCI) and life cycle assessment (LCA) is used to determine the environmental burdens associated with IWM systems. LCIs for waste management are currently available for use in Europe, the United States, Canada and elsewhere. LCI is being used by waste management companies to assess the environmental attributes of future contract tenders. The models are used as benchmarking tools to assess the current environmental profile of a waste management system. They are also a comparative planning and communication tool. The authors are currently looking into publishing, at a future date, the experience of users of this LCI environmental management tool. 12 refs., 3 figs.

Automated Interactive Storeroom Inventory System.

Science.gov (United States)

Sapp, Albert L.; Hess, Larry G.

1989-01-01

The inventory system designed for six storerooms in three buildings at the University of Illinois at Urbana-Champaign's School of Chemical Sciences replaced an issue-slip and transactions record system with barcode technology. Data collection error reductions have been significant, making it easier to determine stock levels and plan purchases.…

PROSES PRODUKSI BIOETANOL DARI LIMBAH CAIR GULA DALAM KAITANNYA DENGAN POTENSI SEBAGAI BAHAN BAKAR DALAM PERSPEKTIF LIFE CYCLE INVENTORY ASSESSMENT

Directory of Open Access Journals (Sweden)

Agusta Samodra Putra

2013-11-01

Full Text Available Life cycle inventory assessment merupakan salah satu tahapan di dalam Life Cycle Assessment (LCA yang bisa digunakan untuk menggambarkan interaksi materi dan energi di dalam suatu proses produksi bioetanol. Studi kasus dilakukan di pabrik gula kawasan Subang dan pabrik bioetanol di kawasan Palimanan yang merupakan pabrik gula dan bioetanol terbesar di Jawa Barat. Inventory yang dilakukan adalah pada bagian perkebunan tebu, pabrikasi tebu menjadi gula, transportasi dari pabrik gula menuju ke pabrik bioetanol, dan pabrikasi etanol. Luas lahan kebun tebu yang dimiliki oleh pabrik gula di Subang adalah seluas 5000 hektar. Dari bahan baku tebu 3000 ton/hari dihasilkan molase sebanyak 60 ton/hari, sisanya menjadi gula dan ampas tebu. Pada inventory kali ini selain dari sisi proses juga dilakukan inventory pada sisi transportasi.

Automatic Road Sign Inventory Using Mobile Mapping Systems

Science.gov (United States)

Soilán, M.; Riveiro, B.; Martínez-Sánchez, J.; Arias, P.

2016-06-01

The periodic inspection of certain infrastructure features plays a key role for road network safety and preservation, and for developing optimal maintenance planning that minimize the life-cycle cost of the inspected features. Mobile Mapping Systems (MMS) use laser scanner technology in order to collect dense and precise three-dimensional point clouds that gather both geometric and radiometric information of the road network. Furthermore, time-stamped RGB imagery that is synchronized with the MMS trajectory is also available. In this paper a methodology for the automatic detection and classification of road signs from point cloud and imagery data provided by a LYNX Mobile Mapper System is presented. First, road signs are detected in the point cloud. Subsequently, the inventory is enriched with geometrical and contextual data such as orientation or distance to the trajectory. Finally, semantic content is given to the detected road signs. As point cloud resolution is insufficient, RGB imagery is used projecting the 3D points in the corresponding images and analysing the RGB data within the bounding box defined by the projected points. The methodology was tested in urban and road environments in Spain, obtaining global recall results greater than 95%, and F-score greater than 90%. In this way, inventory data is obtained in a fast, reliable manner, and it can be applied to improve the maintenance planning of the road network, or to feed a Spatial Information System (SIS), thus, road sign information can be available to be used in a Smart City context.

AUTOMATIC ROAD SIGN INVENTORY USING MOBILE MAPPING SYSTEMS

Directory of Open Access Journals (Sweden)

M. Soilán

2016-06-01

Full Text Available The periodic inspection of certain infrastructure features plays a key role for road network safety and preservation, and for developing optimal maintenance planning that minimize the life-cycle cost of the inspected features. Mobile Mapping Systems (MMS use laser scanner technology in order to collect dense and precise three-dimensional point clouds that gather both geometric and radiometric information of the road network. Furthermore, time-stamped RGB imagery that is synchronized with the MMS trajectory is also available. In this paper a methodology for the automatic detection and classification of road signs from point cloud and imagery data provided by a LYNX Mobile Mapper System is presented. First, road signs are detected in the point cloud. Subsequently, the inventory is enriched with geometrical and contextual data such as orientation or distance to the trajectory. Finally, semantic content is given to the detected road signs. As point cloud resolution is insufficient, RGB imagery is used projecting the 3D points in the corresponding images and analysing the RGB data within the bounding box defined by the projected points. The methodology was tested in urban and road environments in Spain, obtaining global recall results greater than 95%, and F-score greater than 90%. In this way, inventory data is obtained in a fast, reliable manner, and it can be applied to improve the maintenance planning of the road network, or to feed a Spatial Information System (SIS, thus, road sign information can be available to be used in a Smart City context.

Applying inventory classification to a large inventory management system

Directory of Open Access Journals (Sweden)

Benjamin Isaac May

2017-06-01

Full Text Available Inventory classification aims to ensure that business-driving inventory items are efficiently managed in spite of constrained resources. There are numerous single- and multiple-criteria approaches to it. Our objective is to improve resource allocation to focus on items that can lead to high equipment availability. This concern is typical of many service industries such as military logistics, airlines, amusement parks and public works. Our study tests several inventory prioritization techniques and finds that a modified multi-criterion weighted non-linear optimization (WNO technique is a powerful approach for classifying inventory, outperforming traditional techniques of inventory prioritization such as ABC analysis in a variety of performance objectives.

Rapid inventory taking system

International Nuclear Information System (INIS)

Marsden, P.S.S.F.

1980-01-01

A data processing system designed to facilitate inventory taking is described. The process depends upon the earliest possible application of computer techniques and the elimination of manual operations. Data is recorded in optical character recognition (OCR) 'A' form and read by a hand held wand reader. Limited validation checks are applied before recording on mini-tape cassettes. 5 refs

Life cycle inventory of sodium acetate and expanded graphite: Short report

Energy Technology Data Exchange (ETDEWEB)

Jungbluth, N. [ESU-Services Ltd., Uster (Switzerland); Nguyen, B. [Haute Ecole d' Ingenierie et de Gestion du canton de Vaud, Laboratoire d' Energetique Solaire et de Physique du BATiment, HEIG-VD / LESBAT, Yverdon-les-Bains (Switzerland)

2008-07-01

This short report for the Laboratory for Solar Energy and Building Physics at the University of Applied Sciences in Yverdon, Switzerland, takes a look at work being done on the issue of solar energy storage. The use of sodium acetate as a phase-change material is reviewed and considered as being a good way of optimising solar heating systems. The goal of this study was to assess if the energy gain resulting from the use of sodium acetate is balanced out or not by its embodied energy. The study investigated sodium acetate with and without expanded graphite. The paper discusses the life cycle inventory analysis of the two materials and provides some aggregated key indicators for further analysis. In general the ecoinvent methodology has been followed in order to achieve full consistency with the background data used and to provide an assessment of the materials' impact on the environment.

The Safeguards Active Response Inventory System (SARIS)

International Nuclear Information System (INIS)

Carlson, R.L.

1985-04-01

The Safeguards Active Response Inventory System (SARIS) was developed by Westinghouse Hanford Company (WHC) to perform material control and accountability on all the nuclear material under WHC's jurisdiction. SARIS has been in operation for four and one-half years. It has reduced physical inventory plant shutdown time from several days to a few hours. The user-friendly interface has proven successful, as the training time for a new operator is only two to three hours; also errors have been dramatically reduced. The modeling features of SARIS have reduced the reported inventory difference and provide better information for measurement of scrap and waste. The audit files have been usefull in resolving data entry errors and the backup features have averted several potential problems. SARIS as a computerized accountability system has replaced manual record keeping with a consequent increase in productivity. 4 refs

A Control Systems Concept Inventory Test Design and Assessment

Science.gov (United States)

Bristow, M.; Erkorkmaz, K.; Huissoon, J. P.; Jeon, Soo; Owen, W. S.; Waslander, S. L.; Stubley, G. D.

2012-01-01

Any meaningful initiative to improve the teaching and learning in introductory control systems courses needs a clear test of student conceptual understanding to determine the effectiveness of proposed methods and activities. The authors propose a control systems concept inventory. Development of the inventory was collaborative and iterative. The…

Reactor inventory monitoring system for Angra-1 reactor

International Nuclear Information System (INIS)

S Neto, Joaquim A.; Silva, Marcos C.; Pinheiro, Ronaldo F.M.; Soares, Milton; Martinez, Aquilino; Comerlato, Cesar A.; Oliveira, Eugenio A.

1996-01-01

This work describes the project of Reactor Inventory Monitoring System, which will be installed in Angra I Nuclear Power Plant. The inventory information is important to the operators take corrective actions in case of an incident that may cause a failure in the core cooling. (author)

Life-Cycle Inventory and Costs of Different Car Powertrains

Energy Technology Data Exchange (ETDEWEB)

Roeder, Alexander

2001-12-01

This report contains two internal reports that document the data collected for a Ph.D. thesis (Roeder, A.: Integration of Life-Cycle Assessment and Energy Planning Models for the Evaluation of Car Power trains and Fuels, Dissertation ETH 14291, Zuerich/Villigen 2001). The aim of this thesis is a comparison of different car power trains and corresponding fuels under economic and ecological aspects. Such an analysis requires, of course, large amounts of data, and data mining was actually the most time-consuming part of the thesis. However, including a detailed documentation into the thesis would have made the latter far too bulky, so we decided to compile all data documentation into a single background document: the PSI report you are just reading. This report consists of two parts: The first part contains the life-cycle inventory (LCI), while the second part compiles the economic data. The LCI is based on the work of R. Frischknecht et al. that elaborated a very detailed inventory of energy systems in Switzerland (Frischknecht et al.: Oekoinventare von Energiesystemen, 3rd ed., BEW, Bern 1996). Processes already analysed in this reference (e.g. provision of most fossil energy carriers, basic processes such as standard materials or transport processes) have not been described here unless data quality requirements made a re-evaluation necessary (e.g. production of platinum- group metaIs). Within this report, you will find a description of the methodology used, the documentation of all input data, and a discussion of results. Numeric results can be found in the Appendix of the first part. The second part (that deals with the costs) is relatively short, compared to the LCI part. This is mainly because in many cases there was no need to analyse previous steps in a fuel chain or production chain in more detail: when the costs for natural gas for a European customer are known, it is clear that part of these costs is for exploration, part for extraction, part for processing

Life cycle inventory modelling of land use induced by crop consumption - Part 1: Conceptual analysis and methodological proposal

DEFF Research Database (Denmark)

Kløverpris, Jesper; Wenzel, Henrik; Nielsen, Per H.

2008-01-01

Background, Aims and Scope. The actual land use consequences of crop consumption are not very well reflected in existing life cycle inventories. The state of the art is that such inventories typically include data from crop production in the country in which the crop is produced, and consequently...... to reflect long-term changes, and possibly establishment of a link between crop demand and technological development. Through this approach, life cycle inventories for crops reflecting the actual land use consequences of consumption can be established.Recommendations and Perspectives. Further work (based...... use consequences of crop consumption.Results. Based on the current market trend for crops and an analysis of basic mechanisms in crop production, concepts for modelling how crop consumption affects the global agricultural area and the intensity of crop production are suggested. It is demonstrated how...

Transmutation and inventory analysis in an ATW molten salt system

Energy Technology Data Exchange (ETDEWEB)

Sisolak, J.E.; Truebenbach, M.T.; Henderson, D.L. [Univ. of Wisconsin, Madison, WI (United States)

1995-10-01

As an extension of earlier work to determine the equilibrium state of an ATW molten salt, power producing, reactor/transmuter, the WAIT code provides a time dependent view of material inventories and reactor parameters. By considering several cases, the authors infer that devices of this type do not reach equilibrium for dozens of years, and that equilibrium design calculations are inapplicable over most of the reactor life. Fissile inventory and k{sub eff} both vary by factors of 1.5 or more between reactor startup and ultimate convergence to equilibrium.

Optimal Acquisition and Inventory Control for a Remanufacturing System

Directory of Open Access Journals (Sweden)

Zhigang Jiang

2013-01-01

Full Text Available Optimal acquisition and inventory control can often make the difference between successful and unsuccessful remanufacturing. However, there is a greater degree of uncertainty and complexity in a remanufacturing system, which leads to a critical need for planning and control models designed to deal with this added uncertainty and complexity. In this paper, a method for optimal acquisition and inventory control of a remanufacturing system is presented. The method considers three inventories, one for returned item and the other for serviceable and recoverable items. Taking the holding cost for returns, recoverable and remanufactured products, remanufacturing cost, disposal cost, and the loss caused by backlog into account, the optimal inventory control model is established to minimize the total costs. Finally, a numerical example is provided to illustrate the proposed methods.

Environmental inventories for future electricity supply systems for Switzerland

Energy Technology Data Exchange (ETDEWEB)

Dones, R; Gantner, U; Hirschberg, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Doka, G; Knoepfel, I [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

1996-02-01

This report provides the analysis of environmental inventories for selected electricity supply systems considered as possible options to meet the expected electricity demand in Switzerland in year 2030. Two possible electricity demand level cases were postulated by VSE, both under the basic assumption of economic growth: a high-growth demand case corresponding to a yearly increase of 2% from year 1995 to year 2010 and 1% from year 2010 to year 2030, and a low-growth demand case corresponding to a yearly increase of 1% from year 1995 to year 2010 and 0.5% from year 2010 to year 2030. The base (i.e. secured) supply in year 2030 will be, according to VSE, totally dominated by hydro with rather minor contributions from combined heat-and-power plants, small gas turbines, incinerators and solar photovoltaic plants. Due to decommissioning of the currently operating nuclear power plants and expiration of long-term electricity import contracts there will eventually occur a gap between the postulated electricity demand and the base supply. VSE provided seven options to cover this gap, defined in terms of mixes with different contributions from gas, coal, nuclear and solar chains; in this context a distinction is also made with respect to shares of domestic and imported electricity. The systems considered represent advanced technologies, regarded as either typical or most suitable for the Swiss conditions. System-specific input to the present analysis has been partially generated based on direct contacts with the industry. Life Cycle Analysis (LCA) was used to establish environmental inventories for the systems analysed. The analysis has been performed on three levels:(1) individually for each system considered, (2) comparison of systems, (3) comparison of supply options. Results are also provided for these three levels.

REPLACEMENT SPARE PART INVENTORY MONITORING USING ADAPTIVE NEURO FUZZY INFERENCE SYSTEM

Directory of Open Access Journals (Sweden)

Hartono Hartono

2016-01-01

Full Text Available Abstract   The amount of inventory is determined on the basis of the demand. So that users can know the demand forecasts need to be done on the request. This study uses the data to implement a replacement parts on the electronic module production equipment in the telecommunications transmission systems, switching, access and power, ie by replacing the electronic module in the system is trouble  or damaged parts of a good electronic module spare parts inventory, while the faulty electronic modules shipped to the Repair Center for repaired again, so that the results of these improvements can replenish spare part  inventory. Parameters speed on improvement process of electronic module broken (repaired, in the form of an average repair time at the repair centers, in order to get back into the electronic module that is ready for used as spare parts in compliance with the safe supply inventory  warehouse.  This research using the method  of  Adaptive Neuro Fuzzy Inference System (ANFIS in developing a decision support system for inventory control of spare parts available in Warehouse Inventory taking into account several parameters supporters, namely demand, improvement and fulfillment of spare parts and repair time. This study uses a recycling input parameter repair faulty electronic module of the customer to immediately replace the module in inventory warehouse,  do improvements in the Repair Center. So the acceleration restoration factor is very influential as the input spare parts inventory supply in the warehouse and using the Adaptive Neuro-Fuzzy Inference System (ANFIS method.   Keywords: ANFIS, inventory control, replacement

The benefits of life cycle inventory parametric models in streamlining data collection. A case study in the wooden pallet sector

DEFF Research Database (Denmark)

Niero, Monia; Di Felice, F.; Ren, J.

2014-01-01

LCA methodology is time and resource consuming particularly when it comes to data collection and handling, therefore companies, particularly Small and Medium Enterprises (SMEs), are inclined to use streamlined approaches to shorten the resource-consuming life cycle inventory (LCI) phase. An effec......LCA methodology is time and resource consuming particularly when it comes to data collection and handling, therefore companies, particularly Small and Medium Enterprises (SMEs), are inclined to use streamlined approaches to shorten the resource-consuming life cycle inventory (LCI) phase...... study of a SME in the wooden pallet sector, investigating to what extent the use of parametric LCI models can be beneficial both in evaluating the environmental impacts of similar products and in providing a preliminary assessment of the potential environmental impacts of new products. We developed...... an LCI parametric model describing the LCI of a range of wooden pallets and tested its effectiveness with a reference product, namely a non-reversible pallet with four-way blocks. The identified parameters refer to the technical characteristics of the product system, e.g. the number and dimension...

Inventory strategies for systems with fast remanufacturing

NARCIS (Netherlands)

R.H. Teunter (Ruud); E.A. van der Laan (Erwin); D. Vlachos (Dimitrios)

2002-01-01

textabstractWe describe hybrid manufacturing/remanufacturing systems with a long lead time for manufacturing and a short lead time for remanufacturing. We review the classes of inventory strategies for hybrid systems in the literature. These are all based on equal lead times. For systems with slow

A Modular Integrated RFID System for Inventory Control Applications

Directory of Open Access Journals (Sweden)

Ross Bunker

2017-01-01

Full Text Available Recent advances in single-board computer technology have allowed for lightweight, power-efficient devices, such as the Raspberry Pi, to take the place of desktop PCs in certain applications. This has the potential to disrupt the way many current systems are structured, particularly for inventory management and control applications. In this paper, we explore the design and topology of a modular Radio frequency identification (RFID system for inventory management comprised of self-contained, autonomous scanning, and stationary control PCs in a handheld/portable configuration. While similar solutions for such a system may exist on the commercial market, this proposed development provides a template for an open source flexible, low-cost solution that can be easily expanded to meet the needs of businesses with large and small inventories.

Life-Cycle Inventory of Manufacturing Prefinished Engineered Wood Flooring in the Eastern United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

Building products have come under increased scrutiny because of environmental impacts from their manufacturing. However, environmental impacts of manufacturing some wood products—such as prefinished engineered wood flooring—have not been determined. This study examined prefinished engineered wood flooring in the eastern United States following the life-cycle inventory...

Stochastic inventory management at a service facility with a set of ...

African Journals Online (AJOL)

We consider a continuous review perishable inventory system at a service facility with a finite waiting capacity. The maximum inventory level is fixed and the customers arrive according to a Markov arrival process. The life time of each item and the service time are assumed to have independent exponential distributions.

Quality of life of children and adolescents with cancer: revision of studies literature that used the Pediatric Quality Of Life Inventory.

Science.gov (United States)

Queiroz, Débora Milena Farias; Amorim, Maria Helena Costa; Zandonade, Eliana; Miotto, Maria Helena Monteiro de Barros

2015-01-01

To assess the quality of life of children and adolescents with cancer of studies that applied the Pediatric Quality of Life Inventory 3.0 Cancer Module. The study was carried out on the basis of data Scopus Web of Science, BIREME, EBSCO host and Psychoinfo of articles in Spanish, English and Portuguese, and published from 1998 to 2013 that used the Pediatric Quality of life Inventory 3.0 Cancer Module. 21 articles were selected, of which 47.6% were carried out in America, and 61.9% of editions comprehended from 2011 to 2013. The scores variation by dimensions and in general was probably related for the selection of comparison groups, as the diversity of inclusion criteria and variants may be observed for the analysis in each study. The existence of a standard dimension could not be verified either for children ́s /adolescents reports or for parents. It is concluded that the scores averages by dimensions in general have not achieved values below 30 and the largest scores by dimension are above 80. It is suggested that the treatment anxiety dimension in children ́s and adolescents ́s reports may have obtained the largest scores within each study, that is lesser than the difficulty of the children and adolescents in face of the treatment and cancer. Nursing becomes a constant presence in the life of children and adolescents with cancer and it may provide a better quality of life for developing nursing activities and the team may demistify, clarify and help in all phases of the illness and treatment.

Change impact analysis on the life cycle carbon emissions of energy systems – The nuclear example

International Nuclear Information System (INIS)

Nian, Victor

2015-01-01

Highlights: • This paper evaluates the life cycle carbon emission of nuclear power in a scenario based approach. • It quantifies the impacts to the LCA results from the change in design parameters. • The methodology can give indications towards preferred or favorable designs. • The findings contribute to the life cycle inventories of energy systems. - Abstract: The life cycle carbon emission factor (measured by t-CO 2 /GW h) of nuclear power is much lower than those of fossil fueled power generation technologies. However, the fact of nuclear energy being a low carbon power source comes with many assumptions. These assumptions range from system and process definitions, to input–output definitions, to system boundary and cut-off criteria selections, and life cycle inventory dataset. However, there is a somewhat neglected but critical aspect – the design aspect. This refers to the impacts on the life cycle carbon emissions from the change in design parameters related to nuclear power. The design parameters identified in this paper include: (1) the uranium ore grade, (2) the critical process technologies, represented by the average initial enrichment concentration of 235 U in the reactor fuel, and (3) the size of the nuclear power reactor (measured by the generating capacity). If not properly tested, assumptions in the design aspect can lead to an erroneous estimation on the life cycle carbon emission factor of nuclear power. In this paper, a methodology is developed using the Process Chain Analysis (PCA) approach to quantify the impacts of the changes in the selected design parameters on the life cycle carbon emission factor of nuclear power. The concept of doing so broadens the scope of PCAs on energy systems from “one-off” calculation to analysis towards favorable/preferred designs. The findings from the analyses can serve as addition to the life cycle inventory database for nuclear power as well as provide indications for the sustainability of

Joint optimal inspection and inventory for a k-out-of-n system

International Nuclear Information System (INIS)

Bjarnason, Erik T.S.; Taghipour, Sharareh; Banjevic, Dragan

2014-01-01

Purpose: The objective of this paper is to develop a model, which optimizes jointly the inspection frequency and the inventory level for a k-out-of-n system with repairable components whose failures are hidden. Scope: The system is periodically inspected to detect failed components, and the components are either minimally repaired or replaced with spares from the inventory. The system fails between periodic inspections if n−k+1 components are down; in that case, all failed components are inspected and rectified if possible. Otherwise, the failed components are rectified at periodic inspections. An emergency spare is ordered at a system failure, if the inventory is empty and all failed components require replacement. Methodology: Using analytical approach to find the optimal solution is computationally intensive and not practical; a simulation model is developed to solve the problem. Results: The proposed model harmonizes the maintenance and inventory policies and finds the joint optimal solution which results in a minimum total cost. Conclusion: The joint optimization model results in a lower cost compared to separate maintenance and inventory optimization models. Novelty: Few joint models for k-out-of-n systems exist, and none of them investigate repairable components whose failures are hidden and follow a non-homogeneous Poisson process. - Highlights: • We model a k-out-of-n system with hidden failures and inventory. • The system is periodically inspected and the inventory is periodically replenished. • Failed components are either replaced or minimally repaired. • A simulation model is developed to calculate the total expected cost. • The inspection interval and inventory level that minimizes the total cost is found

Evaluation of life cycle inventory data for recycling systems

DEFF Research Database (Denmark)

Brogaard, Line Kai-Sørensen; Damgaard, Anders; Jensen, Morten Bang

2014-01-01

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO2-equivalent...... the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows...... datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO2 per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases....

Radionuclide inventories for short run-time space nuclear reactor systems

International Nuclear Information System (INIS)

Coats, R.L.

1993-01-01

Space Nuclear Reactor Systems, especially those used for propulsion, often have expected operation run times much shorter than those for land-based nuclear power plants. This produces substantially different radionuclide inventories to be considered in the safety analyses of space nuclear systems. This presentation describes an analysis utilizing ORIGEN2 and DKPOWER to provide comparisons among representative land-based and space systems. These comparisons enable early, conceptual considerations of safety issues and features in the preliminary design phases of operational systems, test facilities, and operations by identifying differences between the requirements for space systems and the established practice for land-based power systems. Early indications are that separation distance is much more effective as a safety measure for space nuclear systems than for power reactors because greater decay of the radionuclide activity occurs during the time to transport the inventory a given distance. In addition, the inventories of long-lived actinides are very low for space reactor systems

System-oriented inventory models for spare parts

NARCIS (Netherlands)

Basten, R.J.I.; Houtum, van G.J.J.A.N.

2014-01-01

Stocks of spare parts, located at appropriate locations, can prevent long downtimes of technical systems that are used in the primary processes of their users. Since such downtimes are typically very expensive, generally system-oriented service measures are used in spare parts inventory control.

The safeguards active response inventory system (SARIS)

International Nuclear Information System (INIS)

Carlson, R.L.; Hairston, L.A.; O'Callaghan, P.B.; Grambihler, A.J.; Ruemmler, W.P.

1987-01-01

The Safeguards Active Response Inventory System (SARIS) is a computerized accountability system developed for nuclear materials control that incorporates elements of process monitoring, criticality safety, physical inventory and safeguards. It takes data from the process operations, stores it in an on-line database and translates the information into the formats needed by the various users. It traces the material through the process from feed to product; including recycle, waste and scraps streams. It models the process as the material changes form to ensure that artificial losses are not created. It automatically generates input to Nuclear Materials Management and Safeguards System (NMMSS), performs checks to prevent the possibility of a criticality accident, prepares an audit trail for Safeguards, prints labels for nuclear material containers, and produces DOE/NRC 741 forms. SARIS has been installed at three laboratories across the country

Inventory Abstraction

International Nuclear Information System (INIS)

Leigh, C.

2000-01-01

The purpose of the inventory abstraction as directed by the development plan (CRWMS M and O 1999b) is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M and O 1999c, 1999d). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) (NRC 1999) key technical issue (KTI): ''The rate at which radionuclides in SNF [Spent Nuclear Fuel] are released from the EBS [Engineered Barrier System] through the oxidation and dissolution of spent fuel'' (Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release to the accessible environment. The inventory abstraction is important in assessing system performance because

Evaluating Indicators and Life Cycle Inventories for Processes in Early Stages of Technical Readiness

Energy Technology Data Exchange (ETDEWEB)

Tan, Eric C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Smith, Raymond [U.S. Environmental Protection Agency (EPA); Ruiz-Mercado, Gerardo [U.S. Environmental Protection Agency (EPA)

2017-11-01

This presentation examines different methods for analyzing manufacturing processes in the early stages of technical readiness. Before developers know much detail about their processes, it is valuable to apply various assessments to evaluate their performance. One type of assessment evaluates performance indicators to describe how closely processes approach desirable objectives. Another type of assessment determines the life cycle inventories (LCI) of inputs and outputs for processes, where for a functional unit of product, the user evaluates the resources used and the releases to the environment. These results can be compared to similar processes or combined with the LCI of other processes to examine up-and down-stream chemicals. The inventory also provides a listing of the up-stream chemicals, which permits study of the whole life cycle. Performance indicators are evaluated in this presentation with the U.S. Environmental Protection Agency's GREENSCOPE (Gauging Reaction Effectiveness for ENvironmental Sustainability with a multi-Objective Process Evaluator) methodology, which evaluates processes in four areas: Environment, Energy, Economics, and Efficiency. The method develops relative scores for indicators that allow comparisons across various technologies. In this contribution, two conversion pathways for producing cellulosic ethanol from biomass, via thermochemical and biochemical routes, are studied. The information developed from the indicators and LCI can be used to inform the process design and the potential life cycle effects of up- and down-stream chemicals.

Deploying an NFC-based inventory system: a case study

OpenAIRE

Poullie, Patrick; Bocek, Thomas; Stiller, Burkhard

2015-01-01

NFC tags and transceivers are ubiquitous and well supported. Like many academic research groups, the Communication Systems Group CSG of the University of Zürich owns many physical devices, which are required for research and teaching. Traditionally, a printed, human-readable inventory and attached labels have been used to keep track of these devices. A new inventory approach was developed with the aim of simplifying the data acquisition using an NFC tag-based system supported by an Android ap...

Optimization of Simulated Inventory Systems : OptQuest and Alternatives

OpenAIRE

Kleijnen, J.P.C.; Wan, J.

2006-01-01

This article illustrates simulation optimization through an (s, S) inventory manage- ment system. In this system, the goal function to be minimized is the expected value of speci…c inventory costs. Moreover, speci…c constraints must be satis…ed for some random simulation responses, namely the service or …ll rate, and for some determin- istic simulation inputs, namely the constraint s

Life Cycle Inventory of Biodiesel and Petroleum Diesel for Use in an Urban Bus

Energy Technology Data Exchange (ETDEWEB)

Sheehan, John [National Renewable Energy Lab. (NREL), Golden, CO (United States); Camobreco, Vince [National Renewable Energy Lab. (NREL), Golden, CO (United States); Duffield, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); Graboski, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Graboski, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Shapouri, Housein [National Renewable Energy Lab. (NREL), Golden, CO (United States)

1998-05-01

This report presents the findings from a study of the life cycle inventories (LCIs) for petroleum diesel and biodiesel. An LCI is a comprehensive quantification of all the energy and environmental flows associated with a product from “cradle to grave.” It provides information on raw materials extracted from the environment; energy resources consumed; air, water, and solid waste emissions generated.

A demand-centered, hybrid life-cycle methodology for city-scale greenhouse gas inventories.

Science.gov (United States)

Ramaswami, Anu; Hillman, Tim; Janson, Bruce; Reiner, Mark; Thomas, Gregg

2008-09-01

Greenhouse gas (GHG) accounting for individual cities is confounded by spatial scale and boundary effects that impact the allocation of regional material and energy flows. This paper develops a demand-centered, hybrid life-cycle-based methodology for conducting city-scale GHG inventories that incorporates (1) spatial allocation of surface and airline travel across colocated cities in larger metropolitan regions, and, (2) life-cycle assessment (LCA) to quantify the embodied energy of key urban materials--food, water, fuel, and concrete. The hybrid methodology enables cities to separately report the GHG impact associated with direct end-use of energy by cities (consistent with EPA and IPCC methods), as well as the impact of extra-boundary activities such as air travel and production of key urban materials (consistent with Scope 3 protocols recommended by the World Resources Institute). Application of this hybrid methodology to Denver, Colorado, yielded a more holistic GHG inventory that approaches a GHG footprint computation, with consistency of inclusions across spatial scale as well as convergence of city-scale per capita GHG emissions (approximately 25 mt CO2e/person/year) with state and national data. The method is shown to have significant policy impacts, and also demonstrates the utility of benchmarks in understanding energy use in various city sectors.

Diagnosing inventory management systems : An empirical evaluation of a conceptual approach

NARCIS (Netherlands)

de Vries, Jan

Although many studies have addressed the diagnosing of inventory systems, the field of operations management still seems to lack a systemised and integrated approach towards analysing inventory management systems. In this article, a contribution is made to fill this gap by proposing a conceptual

Application of Response Surface Methodology in Optimizing a Three Echelon Inventory System

Directory of Open Access Journals (Sweden)

Seyed Hossein Razavi Hajiagha

2014-01-01

Full Text Available Inventory control is an important subject in supply chain management. In this paper, a three echelon production, distribution, inventory system composed of one producer, two wholesalers and a set of retailers has been considered. Costumers' demands follow a compound Poisson process and the inventory policy is a kind of continuous review (R, Q. In this paper, regarding the standard cost structure in an inventory model, the cost function of system has been approximated using Response Surface Methodology as a combination of designed experiments, simulation, regression analysis and optimization. The proposed methodology in this paper can be applied as a novel method in optimization of inventory policy of supply chains. Also, the joint optimization of inventory parameters, including reorder point and batch order size, is another advantage of the proposed methodology.

Validity and reliability of the Portuguese-Brazilian version of the Quality of Life in Epilepsy Inventory-89.

Science.gov (United States)

Azevedo, Auro Mauro; Alonso, Neide Barreira; Vidal-Dourado, Marcos; Noffs, Maria Helena da Silva; Pascalicchio, Tatiana Frascarelli; Caboclo, Luís Otávio Sales Ferreira; Ciconelli, Rozana Mesquita; Sakamoto, Américo Ceiki; Yacubian, Elza Márcia Targas

2009-03-01

The purpose of this article was to report the translation of the Quality of Life in Epilepsy Inventory-89 (QOLIE-89) into a Portuguese-Brazilian version and evaluate its reliability and validity. This study involved 105 outpatients: 54 patients with refractory temporal lobe epilepsy (TLE) with mesial temporal sclerosis (MTS) and 51 with juvenile myoclonic epilepsy (JME). Reliability and test-retest reliability were assessed. Relationships between QOLIE-89 domains and other questionnaires (Nottingham Health Profile, Beck Depression Inventory, Adverse Event Profile, Neuropsychological Evaluation), and external measures such as demographic and clinical variables were analyzed to examine construct validity. Internal consistency (Cronbach's alpha=0.73-0.92) and test-retest reliability (intraclass correlation coefficient=0.60-0.84) for individual domains were acceptable. For construct validity, we verified high correlations between the QOLIE-89 and the Nottingham Health Profile, Beck Depression Inventory, Adverse Event Profile, and Neuropsychological Evaluation. For clinical characteristics, the patients with juvenile myoclonic epilepsy had better quality-of-life scores on 11 of 17 QOLIE-89 subscales compared with patients with temporal lobe epilepsy (P<0.05). These results support the reliability and validity of the Portuguese-Brazilian translation of QOLIE-89.

Environmental inventories for future electricity supply systems for Switzerland

International Nuclear Information System (INIS)

Dones, R.; Gantner, U.; Hirschberg, S.; Doka, G.; Knoepfel, I.

1996-02-01

This report provides the analysis of environmental inventories for selected electricity supply systems considered as possible options to meet the expected electricity demand in Switzerland in year 2030. The work was carried out by the Paul Scherrer Institute (PSI) and the Swiss Federal Institute of Technology Zurich (ETHZ), and was supported by the Swiss Association of Producers and Distributers of Electricity (VSE). Two possible electricity demand level cases were postulated by VSE, both under the basic assumption of economic growth: a high-growth demand case corresponding to a yearly increase of 2% from year 1995 to year 2010 and 1% from year 2010 to year 2030, and a low-growth demand case corresponding to a yearly increase of 1% from year 1995 to year 2010 and 0.5% from year 2010 to year 2030. The base (i.e. secured) supply in year 2030 will be, according to VSE, totally dominated by hydro with rather minor contributions from combined heat-and-power plants, small gas turbines, incinerators and solar photovoltaic plants. Due to decommissioning of the currently operating nuclear power plants and expiration of long-term electricity import contracts there will eventually occur a gap between the postulated electricity demand and the base supply. VSE provided seven options to cover this gap, defined in terms of mixes with different contributions from gas, coal, nuclear and solar chains; in this context a distinction is also made with respect to shares of domestic and imported electricity. The systems considered represent advanced technologies, regarded as either typical or most suitable for the Swiss conditions. System-specific input to the present analysis has been partially generated based on direct contacts with the industry. Life Cycle Analysis (LCA) was used to establish environmental inventories for the systems analysed. The analysis has been performed on three levels: 1) individually for each system considered, 2) comparison of systems, 3) comparison of supply

Life cycle inventories for bioenergy and fossil-fuel fired cogeneration plants

International Nuclear Information System (INIS)

Braennstroem-Norberg, B.M.; Dethlefsen, U.

1998-06-01

Life-cycle inventories for heat production from forest fuel, Salix, coal and oil are presented. Data from the Oerebro cogeneration plant are used for the bioenergy and coal cycles, whereas the oil-fired cycle is based on a fictive plant producing 53 MW electricity and 106 MW heat, also located in the town of Oerebro. This life cycle analysis only covers the inventory stage. A complete life cycle analysis also includes an environmental impact assessment. The methods for assessing environmental impact are still being developed and thus this phase has been omitted here. The intention is, instead, to provide an overall perspective of where in the chain the greatest environmental load for each fuel can be found. Production and energy conversion of fuel requires energy, which is often obtained from fossil fuel. This input energy corresponds to about 11% of the extracted amount of energy for oil, 9% for coal, 6% for Salix, whereas it is about 4% for forest fuel. Utilization of fossil fuel in the coal cycle amounts to production of electricity using coal condensation intended for train transports within Poland. In a life cycle perspective, biofuels show 20-30 times lower emissions of greenhouse gases in comparison with fossil fuels. The chains for biofuels also give considerably lower SO 2 emissions than the chains for coal and oil. The coal chain shows about 50% higher NO x emission than the other fuels. Finally, the study illustrates that emission of particles are similar for all sources of energy. The biofuel cycle is assessed to be generally applicable to plants of similar type and size and with similar transport distances. The oil cycle is probably applicable to small-scale cogeneration plants. However, at present there are no cogeneration plants in Sweden that are solely fired with oil. In the case of the coal cycle, deep mining and a relatively long transport distance within Poland have been assumed. If the coal mining had been from open-cast mines, and if the

Quality of life of patients who underwent aesthetic rhinoplasty: 100 cases assessed with the Glascow Benefit Inventory.

Science.gov (United States)

Kotzampasakis, Dimitrios; Piniara, Anastasia; Themelis, Sotirios; Kotzampasakis, Stylianos; Gabriel, Eustratios; Maroudias, Nikos; Nikolopoulos, Thomas

2017-09-01

The aim of the present study is to assess the long-term effect of classic rhinoplasty on patients' quality of life. Outcomes research. The study included 100 operated patients; there were 34 males and 66 females. The ages ranged between 23 and 57 years old, with a mean of 36.4 years. A minimum of 3 years between the operation and the study was selected to assess the long-term effect of the operation on the patients' quality of life and exclude any short-term impressions. The time elapsed between surgery and the time of the study ranged from 3 to 13 years, with a mean of 6.8 years. Patients were assessed using the Glasgow Benefit Inventory, which has been proven valid and reliable in ear, nose, and throat interventions. From the 100 patients included in the study, 92 reported improvement in their quality of life due to the operation and only eight worsening. In the social support subscale, 97 patients reported better quality of life, and only three patients reported worse quality of life. The patients' overall life markedly improved, reaching a mean of 80% in the Glasgow Benefit Inventory. The present long-term study using a validated and reliable instrument concludes that rhinoplasty improves the quality of life of patients in all sectors. 2c Laryngoscope, 127:2017-2025, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Inventory transparency for agricultural produce through IOT

Science.gov (United States)

Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

2017-06-01

Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

National Biological Monitoring Inventory

International Nuclear Information System (INIS)

Burgess, R.L.

1979-01-01

The National Biological Monitoring Inventory, initiated in 1975, currently consists of four computerized data bases and voluminous manual files. MAIN BIOMON contains detailed information on 1,021 projects, while MINI BIOMON provides skeletal data for over 3,000 projects in the 50 states, Puerto Rico, the Virgin Islands, plus a few in Canada and Mexico. BIBLIO BIOMON and DIRECTORY BIOMON complete the computerized data bases. The structure of the system provides for on-line search capabilities to generate details of agency sponsorship, indications of funding levels, taxonomic and geographic coverage, length of program life, managerial focus or emphasis, and condition of the data. Examples of each of these are discussed and illustrated, and potential use of the Inventory in a variety of situations is emphasized

An Inquiry into the Life Cycle of Systems of Inner Walls: Comparison of Masonry and Drywall

Directory of Open Access Journals (Sweden)

Karina Condeixa

2015-06-01

Full Text Available Life Cycle Assessment is a methodology that investigates impacts linked to a product or service during its entire life cycle. Life Cycle Assessment studies investigate processes and sub-processes in a fragmented way to ascertain their inputs, outputs and emissions and get an overview of the generating sources of their environmental loads. The lifecycle concept involves all direct and indirect processes of the studied object. This article aims to model the material flows in the masonry and drywall systems and internal walls in a Brazilian scenario, and calculate the climate change impacts generated by the transport of the component materials of the systems. Internal walls of a residential dwelling in Rio de Janeiro are analyzed from a qualitative inventory of all life cycles with an analysis of material flows, based on technical and academic literature. All Life Cycle Impact Assessment of the systems is carried out with international data from the database, and using the IPCC2013 method for climate change impacts. This study disregards the refurbishment and possible extensions within the use phase. Thus, the inventory identifies weaknesses of the systems while the impact assessment validates the results. This study allows us a complete understanding about the inner walls systems in the Brazilian scenario, evidencing its main weaknesses and subsidizes decision-making for the industry and for planning of the new buildings.

Integrated inventory ranking system for oilfield equipment industry

Directory of Open Access Journals (Sweden)

Jalel Ben Hmida

2014-01-01

Full Text Available Purpose: This case study is motivated by the subcontracting problem in an oilfield equipment and service company where the management needs to decide which parts to manufacture in-house when the capacity is not enough to make all required parts. Currently the company is making subcontracting decisions based on management’s experience. Design/methodology/approach: Working with the management, a decision support system (DSS is developed to rank parts by integrating three inventory classification methods considering both quantitative factors such as cost and demand, and qualitative factors such as functionality, efficiency, and quality. The proposed integrated inventory ranking procedure will make use of three classification methods: ABC, FSN, and VED. Findings: An integration mechanism using weights is developed to rank the parts based on the total priority scores. The ranked list generated by the system helps management to identify about 50 critical parts to manufacture in-house. Originality/value: The integration of all three inventory classification techniques into a single system is a unique feature of this research. This is important as it provides a more inclusive, big picture view of the DSS for management’s use in making business decisions.

Life Cycle Inventory Analysis of Prospective Insect Based Feed Production in West Africa

Directory of Open Access Journals (Sweden)

Martin Roffeis

2017-09-01

Full Text Available While the concept of insect based feeds (IBFs promises great potential, especially in developing countries, the sustainability performance of IBF production remains widely underexplored. Drawing on experimental data from rearing trials in West Africa, three different insect production systems were modelled ex-ante. The generic models served as a basis to analyse and compare the process performances of different IBF production systems using Musca domestica and Hermetia illucens reared on different substrates. The results show that the input efficiency in the production of IBF is largely determined by the quality of rearing substrates, the larval development time and the employed inoculation practises, i.e., the method by which eggs or larvae are added to rearing substrates. The H. illucens system ranked highest for conversion efficiency (substrate input per IBF output, but showed substantially higher inputs in labour, fossil energy and output of wastewater. M. domestica systems operated at lower conversion efficiencies, which resulted in higher outputs of residue substrates, together with higher emissions, land requirements, built infrastructure and water. By offering full disclosure of generic inventory data, this study provides data and inspiration for prospect research and development activities and offers a reference to future life cycle assessments (LCAs on IBF.

An Improved Inventory Control Model for the Brazilian Navy Supply System

Science.gov (United States)

2001-12-01

Portuguese Centro de Controle de Inventario da Marinha, the Brazilian Navy Inventory Control Point (ICP) developed an empirical model called SPAADA...NAVAL POSTGRADUATE SCHOOL Monterey, California THESIS Approved for public release; distribution is unlimited AN IMPROVED INVENTORY CONTROL ...AN IMPROVED INVENTORY CONTROL MODEL FOR THE BRAZILIAN NAVY SUPPLY SYSTEM Contract Number Grant Number Program Element Number Author(s) Moreira

Mining Available Data from the United States Environmental Protection Agency to Support Rapid Life Cycle Inventory Modeling of Chemical Manufacturing

Science.gov (United States)

Demands for quick and accurate life cycle assessments create a need for methods to rapidly generate reliable life cycle inventories (LCI). Data mining is a suitable tool for this purpose, especially given the large amount of available governmental data. These data are typically a...

Life Cycle Inventory Analysis for a Small-Scale Trawl Fishery in Sendai Bay, Japan

Directory of Open Access Journals (Sweden)

Kazuhito Watanabe

2016-04-01

Full Text Available A reduced environmental burden, while maintaining high quality and low cost, has become an important factor for achieving sustainability in the fisheries sector. The authors performed life cycle inventory (LCI analysis targeting the fish production for a small-scale trawl fishery including small trawlers operating in Sendai Bay, Japan. The average annual cumulative CO2 emissions for the small trawlers were 4.7 ton-CO2/ton-product and 8.3 ton-CO2/million Japanese yen (JPN. Total fuel consumption contributed to 97% of the global warming potential. The range of variation in the basic unit of CO2 for each small trawler was also elucidated. Energy conservation through lower fuel consumption is shown to be an effective measure for reducing CO2 in a small trawler fishery. Moreover, the authors examined the system boundary, the determination of the functional unit, and the allocation method of applying LCI analysis to fisheries. Finally, the economy and environment of small trawler fisheries are discussed as important factors for sustainable fisheries, and the life cycle approach is applied to a new fishery type in Japan.

Application of queuing theory in inventory systems with substitution flexibility

Science.gov (United States)

Seyedhoseini, S. M.; Rashid, Reza; Kamalpour, Iman; Zangeneh, Erfan

2015-03-01

Considering the competition in today's business environment, tactical planning of a supply chain becomes more complex than before. In many multi-product inventory systems, substitution flexibility can improve profits. This paper aims to prepare a comprehensive substitution inventory model, where an inventory system with two substitute products with ignorable lead time has been considered, and effects of simultaneous ordering have been examined. In this paper, demands of customers for both of the products have been regarded as stochastic parameters, and queuing theory has been used to construct a mathematical model. The model has been coded by C++, and it has been analyzed due to a real example, where the results indicate efficiency of proposed model.

Implementation of the Facility Integrated Inventory Computer System (FICS)

International Nuclear Information System (INIS)

McEvers, J.A.; Krichinsky, A.M.; Layman, L.R.; Dunnigan, T.H.; Tuft, R.M.; Murray, W.P.

1980-01-01

This paper describes a computer system which has been developed for nuclear material accountability and implemented in an active radiochemical processing plant involving remote operations. The system posesses the following features: comprehensive, timely records of the location and quantities of special nuclear materials; automatically updated book inventory files on the plant and sub-plant levels of detail; material transfer coordination and cataloging; automatic inventory estimation; sample transaction coordination and cataloging; automatic on-line volume determination, limit checking, and alarming; extensive information retrieval capabilities; and terminal access and application software monitoring and logging

An inventory control model for biomass dependent production systems

International Nuclear Information System (INIS)

Grado, S.C.; Strauss, C.H.

1993-01-01

The financial performance of a biomass dependent production system was critiqued based on the development and validation of an inventory control model. Dynamic programming was used to examine the constraints and capabilities of producing ethanol from various biomass crops. In particular, the model evaluated the plantation, harvest, and manufacturing components of a woody biomass supply system. The optimum wood to ethanol production scheme produced 38 million litres of ethanol in the harvest year, at 13.6 million litre increase over the least optimal policy as demonstrated in the dynamic programming results. The system produced ethanol at a delivered cost of $0.38 L -1 which was consistent with the unit costs from other studies. Nearly 60% of the delivered costs were in ethanol production. The remaining costs were attributed to growing biomass (14%), harvest and shipment of the crop (18%), storage of the raw material and finished product (7%) and open-quotes lost salesclose quotes (2%). Inventory control, in all phases of production, proved to be an important cost consideration throughout the model. The model also analyzed the employment of alternative harvesting policies and the use of different or multiple feedstocks. A comparison between the least cost wood system and an even cut wood system further revealed the benefits of using an inventory control system

Control system implementation for a complex low inventory cryogenic distillation system for Princeton TFTR

International Nuclear Information System (INIS)

Busigin, A.; Busigin, C.J.; Adamek, F.; Woodall, K.B.; Robins, J.R.; Bellamy, D.G.; Fong, C.; Kalyanam, K.M.; Sood, S.K.

1995-01-01

The TFTR Tritium Purification System (TPS) is based on a Pd/Ag diffuser front-end for separating hydrogen isotopes from inert gas, and a four column cryogenic distillation cascade for separation of hydrogen isotopes. The system has a tritium inventory of approximately 0.5 g while successfully producing pure H 2 , D 2 and T 2 products. The system has recently been built and successfully commissioned with protium and deuterium. Stable automatic control of the cascade has been demonstrated even when feed rate and composition varied. The automatic control scheme maintained stable column inventories and excellent H 2 and D 2 product qualities. The control system employed new control concepts such as real time analysis of mid-column composition using temperature and pressure data for feedback control. Very stable column inventory control was achieved by automatic adjustment of inter-column flows (feed forward and feed back). This paper discusses the control system design and presents performance test results. (orig.)

Life cycle inventory for palm based plywood: A gate-to-gate case study

Science.gov (United States)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Online helium inventory monitoring of JLab cryogenic systems

Science.gov (United States)

Hasan, N.; Knudsen, P.; Wright, M.

2017-12-01

There are five cryogenic plants at Jefferson Lab which support the LINAC, experiment hall end-stations and test facility. The majority of JLab’s helium inventory, which is around 15 tons, is allocated in the LINAC cryo-modules, with the majority of the balance of helium distributed at the cryogenic-plant level mainly as stored gas and liquid for stable operation. Due to the organic evolution of the five plants and independent actions within the experiment halls, the traditional inventory management strategy suffers from rapid identification of potential leaks. This can easily result in losses many times higher than the normally accepted (average) loss rate. A real-time program to quickly identify potential excessive leakage was developed and tested. This program was written in MATLAB© for portability, easy diagnostics and modification. It interfaces directly with EPICS to access the cryogenic system state, and with and NIST REFPROP© for real fluid properties. This program was validated against the actual helium offloaded into the system. The present paper outlines the details of the inventory monitoring program, its validation and a sample of the achieved results.

Life cycle management of service water systems

International Nuclear Information System (INIS)

Egan, Geoffrey R.; Besuner, Philip M.; Mahajan, Sat P.

2004-01-01

As nuclear plants age, more attention must focus on age and time dependent degradation mechanisms such as corrosion, erosion, fatigue, etc. These degradation mechanisms can best be managed by developing a life cycle management plan which integrates past historical data, current conditions and future performance needs. In this paper we present two examples of life cycle management. In the first example, the 20-year maintenance history of a sea water cooling system (cement-lined, cast iron) is reviewed to develop attributes like maintenance cost, spare part inventory, corrosion, and repair data. Based on this information, the future expected damage rate was forecast. The cost of managing the future damage was compared with the cost to replace (in kind and with upgraded materials. A decision optimization scheme was developed to choose the least cost option from: a) Run as-is and repair; b) replace in kind; or c) replace with upgraded material and better design. In the second example, life cycle management techniques were developed for a ceilcote lined steel pipe cooling water system. Screens (fixed and traveling), filters, pumps, motors, valves, and piping were evaluated. (author)

LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS.

Energy Technology Data Exchange (ETDEWEB)

FTHENAKIS,V.M.; KIM, H.C.; WANG, W.

2007-03-30

Material flows and emissions in all the stages of production of zinc, copper, aluminum, cadmium, indium, germanium, gallium, selenium, tellurium, and molybdenum were investigated. These metals are used selectively in the manufacture of solar cells, and emission and energy factors in their production are used in the Life Cycle Analysis (LCA) of photovoltaics. Significant changes have occurred in the production and associated emissions for these metals over the last 10 years, which are not described in the LCA databases. Furthermore, emission and energy factors for several of the by-products of the base metal production were lacking. This report aims in updating the life-cycle inventories associated with the production of the base metals (Zn, Cu, Al, Mo) and in defining the emission and energy allocations for the minor metals (Cd, In, Ge, Se, Te and Ga) used in photovoltaics.

Validity and reliability of the Portuguese version of the quality of life in epilepsy inventory (QOLIE-31) for Brazil.

Science.gov (United States)

da Silva, Tatiana Indelicato; Ciconelli, Rozana Mesquita; Alonso, Neide Barreira; Azevedo, Auro Mauro; Westphal-Guitti, Ana Carolina; Pascalicchio, Tatiana Frascarelli; Marques, Carolina Mattos; Caboclo, Luís Otávio Sales Ferreira; Cramer, Joyce A; Sakamoto, Américo Ceiki; Yacubian, Elza Márcia Targas

2007-03-01

We report the cultural adaptation and psychometric properties of the Quality of Life in Epilepsy-31 Inventory (QOLIE-31) for the Portuguese language and Brazilian culture. This study involved 150 outpatients: 50 presurgical patients with refractory temporal lobe epilepsy (TLE) related to mesial temporal sclerosis (MTS), 50 patients with juvenile myoclonic epilepsy (JME), and 50 seizure-free patients with TLE. They completed the QOLIE-31, Nottingham Health Profile (NHP), Beck Depression Inventory (BDI), and Adverse Events Profile (AEP) and underwent a neuropsychological evaluation (NE). Internal consistency reliability, interrater and test-retest reliability, and construct validity were assessed. QOLIE-31 mean scores were 33.1 (Social Function), 68.9 (Overall Quality of Life), 56.5 (Seizure Worry), 64.1 (Emotional Well-Being), 63.7 (Energy/Fatigue), 38.9 (Cognitive Function), and 49.7 (Medication Effects). Internal consistency was high (Cronbach's alpha), as were the associations between QOLIE-31 and the BDI, NHP, AEP, and NE. The Portuguese/Brazilian version of the QOLIE-31 inventory showed good reliability, validity, and construct validity.

Tank waste remediation system baseline tank waste inventory estimates for fiscal year 1995

International Nuclear Information System (INIS)

Shelton, L.W.

1996-01-01

A set of tank-by-tank waste inventories is derived from historical waste models, flowsheet records, and analytical data to support the Tank Waste Remediation System flowsheet and retrieval sequence studies. Enabling assumptions and methodologies used to develop the inventories are discussed. These provisional inventories conform to previously established baseline inventories and are meant to serve as an interim basis until standardized inventory estimates are made available

Sensor concentrator unit for the Continuous Automated Vault Inventory System

Energy Technology Data Exchange (ETDEWEB)

Nodine, R.N.; Lenarduzzi, R.

1997-06-01

The purpose of this document is to describe the use and operation of the sensor concentrator in the Continuous Automated Vault Inventory System (CAVIS). The CAVIS electronically verifies the presence of items of stored special nuclear material (SNM). US Department of Energy orders require that stored SNM be inventoried periodically to provide assurance that the material is secure. Currently this inventory is a highly manual activity, requiring personnel to enter the storage vaults. Using a CAVIS allows the frequency of physical inventories to be significantly reduced, resulting in substantial cost savings, increased security, and improved safety. The electronic inventory of stored SNM requires two different types of sensors for each item. The two sensors measure different parameters of the item, usually weight and gamma rays. A CAVIS is constructed using four basic system components: sensors, sensor concentrators, a data collection unit, and a database/user interface unit. One sensor concentrator supports the inventory of up to 20 items (40 sensors) and continuously takes readings from the item sensors. On request the sensor concentrator outputs the most recent sensor readings to the data collection unit. The information transfer takes place over a RS485 communications link. The data collection unit supports from 1 to 120 sensor concentrators (1 to 2,400 items) and is referred to as the Sensor Polling and Configuration System (SPCS). The SPCS is connected by a secure Transmission Control Protocol/Internet Protocol (TCP/IP) network to the database/user interface unit, which is referred to as the Graphical Facility Information Center (GraFIC). A CAVIS containing more than 2,400 items is supported by connecting additional SPCS units to the GraFIC.

Sensor concentrator unit for the Continuous Automated Vault Inventory System

International Nuclear Information System (INIS)

Nodine, R.N.; Lenarduzzi, R.

1997-06-01

The purpose of this document is to describe the use and operation of the sensor concentrator in the Continuous Automated Vault Inventory System (CAVIS). The CAVIS electronically verifies the presence of items of stored special nuclear material (SNM). US Department of Energy orders require that stored SNM be inventoried periodically to provide assurance that the material is secure. Currently this inventory is a highly manual activity, requiring personnel to enter the storage vaults. Using a CAVIS allows the frequency of physical inventories to be significantly reduced, resulting in substantial cost savings, increased security, and improved safety. The electronic inventory of stored SNM requires two different types of sensors for each item. The two sensors measure different parameters of the item, usually weight and gamma rays. A CAVIS is constructed using four basic system components: sensors, sensor concentrators, a data collection unit, and a database/user interface unit. One sensor concentrator supports the inventory of up to 20 items (40 sensors) and continuously takes readings from the item sensors. On request the sensor concentrator outputs the most recent sensor readings to the data collection unit. The information transfer takes place over a RS485 communications link. The data collection unit supports from 1 to 120 sensor concentrators (1 to 2,400 items) and is referred to as the Sensor Polling and Configuration System (SPCS). The SPCS is connected by a secure Transmission Control Protocol/Internet Protocol (TCP/IP) network to the database/user interface unit, which is referred to as the Graphical Facility Information Center (GraFIC). A CAVIS containing more than 2,400 items is supported by connecting additional SPCS units to the GraFIC

The integrated control of production-inventory systems

NARCIS (Netherlands)

Nyen, van P.L.M.

2005-01-01

In this thesis, we investigate a multi-product, multi-machine production-inventory (PI) system that is characterized by: ?? relatively high and stable demand; ?? uncertainty in the precise timing of demand; ?? variability in the production process; ?? job shop routings; ?? considerable setup times

Effect of biogenic carbon inventory on the life cycle assessment of bioenergy: challenges to the neutrality assumption

NARCIS (Netherlands)

Wiloso, E.I.; Heijungs, R.; Huppes, G.; Fang, K.

2016-01-01

Biogenic carbon is defined as carbon contained in biomass that is accumulated during plant growth. In spite of the considerable progress towards the inventory of biogenic carbon in the life cycle assessment (LCA) of bioenergy in policy guidelines, many scientific articles tend to give no

ALLOCATING ENVIRONMENTAL BURDENS ACROSS CO-PRODUCTS TO CREATE A LIFE CYCLE INVENTORY: IS THERE A BEST WAY?

Science.gov (United States)

Allocation methodology for creating life cycle inventories is frequently addressed, discussed and debated, yet the methodology continues to be in a state of flux. ISO 14041 puts perspective on the issues but its one-size fits all framework is being challenged. It is clear that ...

Reactor component inventory system at FFTF

International Nuclear Information System (INIS)

Ordonez, C.R.; Redekopp, R.D.; Reed, E.A.

1985-02-01

A reliable inventory control system was developed at the Fast Flux Test Facility (FFTF) to keep track of the occupancy of 900 refueling facility locations, to compile historical data on the movement of each reactor assembly, and to simulate assembly moves. The simulate capability is valuable because it allows verification of documents before they are issued for use in the plant, and eliminates the possibility of planning illegal or impossible moves. The system is installed on a UNIVAC 1100 computer and is maintained using a data base management system by Sperry Univac called MAPPER

INVENTORY ABSTRACTION

International Nuclear Information System (INIS)

Ragan, G.

2001-01-01

The purpose of the inventory abstraction, which has been prepared in accordance with a technical work plan (CRWMS M andO 2000e for/ICN--02 of the present analysis, and BSC 2001e for ICN 03 of the present analysis), is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M andO 2000c, 2000f). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) key technical issue (KTI): ''The rate at which radionuclides in SNF [spent nuclear fuel] are released from the EBS [engineered barrier system] through the oxidation and dissolution of spent fuel'' (NRC 1999, Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release

The Planetary Data System Distributed Inventory System

Science.gov (United States)

Hughes, J. Steven; McMahon, Susan K.

1996-01-01

The advent of the World Wide Web (Web) and the ability to easily put data repositories on-line has resulted in a proliferation of digital libraries. The heterogeneity of the underlying systems, the autonomy of the individual sites, and distributed nature of the technology has made both interoperability across the sites and the search for resources within a site major research topics. This article will describe a system that addresses both issues using standard Web protocols and meta-data labels to implement an inventory of on-line resources across a group of sites. The success of this system is strongly dependent on the existence of and adherence to a standards architecture that guides the management of meta-data within participating sites.

Greenhouse gases emissions from waste management practices using Life Cycle Inventory model.

Science.gov (United States)

Chen, Tsao-Chou; Lin, Cheng-Fang

2008-06-30

When exploring the correlation between municipal solid waste management and green house gas emission, the volume and physical composition of the waste matter must be taken into account. Due to differences in local environments and lifestyles the quantity and composition of waste often vary. This leads to differences in waste treatment methods and causes different volumes of greenhouse gases (GHGs), highlighting the need for local research. In this study the Life Cycle Inventory method was used with global warming indicator GHGs as the variables. By quantifying the data and adopting a region-based approach, this created a model of household MSWM in Taipei City, a metropolitan region in Taiwan. To allow analysis and comparison a compensatory system was then added to expand the system boundary. The results of the analysis indicated that out of all the solid waste management sub-models for a function unit, recycling was the most effective method for reducing GHG emissions while using kitchen food waste as swine feeding resulted in the most GHG emissions. As for the impact of waste collection vehicles on emissions, if the efficiency of transportation could be improved and energy consumption reduced, this will help solid waste management to achieve its goal of reducing GHG emissions.

Greenhouse gases emissions from waste management practices using Life Cycle Inventory model

International Nuclear Information System (INIS)

Chen, T.-C.; Lin, C.-F.

2008-01-01

When exploring the correlation between municipal solid waste management and green house gas emission, the volume and physical composition of the waste matter must be taken into account. Due to differences in local environments and lifestyles the quantity and composition of waste often vary. This leads to differences in waste treatment methods and causes different volumes of greenhouse gases (GHGs), highlighting the need for local research. In this study the Life Cycle Inventory method was used with global warming indicator GHGs as the variables. By quantifying the data and adopting a region-based approach, this created a model of household MSWM in Taipei City, a metropolitan region in Taiwan. To allow analysis and comparison a compensatory system was then added to expand the system boundary. The results of the analysis indicated that out of all the solid waste management sub-models for a function unit, recycling was the most effective method for reducing GHG emissions while using kitchen food waste as swine feeding resulted in the most GHG emissions. As for the impact of waste collection vehicles on emissions, if the efficiency of transportation could be improved and energy consumption reduced, this will help solid waste management to achieve its goal of reducing GHG emissions

Life cycle inventory analysis for electricity in Korea

International Nuclear Information System (INIS)

Kun-Mo Lee; Sang-Yong Lee; Tak Hur

2004-01-01

A life cycle inventory analysis (LCI) database that encompasses the entire Korean electrical energy grid was developed. The CO 2 emission per functional unit of electricity, 1 kWh of usable electricity, was 0.49 kg/fu. Contribution of direct emission of CO 2 to the total CO 2 emission was around 95%. In the case of emissions of SO x , NO x , and PM, contribution of the upstream processes including raw energy material extraction, transport, and fuel processing to the total emissions were 29%, 26%, and 43%, respectively. Emissions of air pollutants from power generation or direct emissions are much greater in quantity than those from the upstream processes. On the other hand, the opposite is true for the emissions of water pollutants. Bituminous coal was the largest source of emissions of air and water pollutants including CO 2 , Natural gas was the best fuel and anthracite coal was the worst fuel with respect to the direct and upstream emissions of air and water pollutants and wastes. (author)

Considering inventory distributions in a stochastic periodic inventory routing system

Science.gov (United States)

Yadollahi, Ehsan; Aghezzaf, El-Houssaine

2017-07-01

Dealing with the stochasticity of parameters is one of the critical issues in business and industry nowadays. Supply chain planners have difficulties in forecasting stochastic parameters of a distribution system. Demand rates of customers during their lead time are one of these parameters. In addition, holding a huge level of inventory at the retailers is costly and inefficient. To cover the uncertainty of forecasting demand rates, researchers have proposed the usage of safety stock to avoid stock-out. However, finding the precise level of safety stock depends on forecasting the statistical distribution of demand rates and their variations in different settings among the planning horizon. In this paper the demand rate distributions and its parameters are taken into account for each time period in a stochastic periodic IRP. An analysis of the achieved statistical distribution of the inventory and safety stock level is provided to measure the effects of input parameters on the output indicators. Different values for coefficient of variation are applied to the customers' demand rate in the optimization model. The outcome of the deterministic equivalent model of SPIRP is simulated in form of an illustrative case.

Adaptive inventory management system of an industrial enterprise in the unsteady market environment

Directory of Open Access Journals (Sweden)

Dzenzelyuk N.

2017-01-01

Full Text Available The article examines the features and problems of methodology of formation of inventory management in a volatile market environment. Currently, there was a need to change the development paradigm of the scaling operations to the more efficient use of resources and capital. In this regard, the high importance of the newly received inventory control problem as an essential component of enterprise resources. The author sets out the basic methodological principles of inventory management systems. The article from the standpoint of the theory of systems and automatic control systems proposed structure adaptive inventory management system. As a criterion of the effectiveness of the joint action is considered the minimum criterion of total costs and expenses associated with the unmet demand. The simulation results confirm the efficiency of the developed model under unforeseen and significant fluctuations in the parameters of stochastic demand.

The order and volume fill rates in inventory control systems

DEFF Research Database (Denmark)

Thorstenson, Anders; Larsen, Christian

2014-01-01

This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total demanded quantity the order fill rate would be the preferred service...... level measure. The main result shows how the order and volume fill rates are related in magnitude. Earlier results derived for a single-item, single-stage, continuous review inventory system with backordering and constant lead times controlled by a base-stock policy are extended in different directions...... extensions consider more general inventory control review policies with backordering, as well as some relations between service measures. A particularly important result in the paper concerns an alternative service measure, the customer order fill rate, and shows how this measure always exceeds the other two...

76 FR 42140 - Public Availability of the Merit Systems Protection Board's FY 2010 Service Contract Inventory

Science.gov (United States)

2011-07-18

... MERIT SYSTEMS PROTECTION BOARD Public Availability of the Merit Systems Protection Board's FY 2010 Service Contract Inventory AGENCY: Merit Systems Protection Board. ACTION: Notice. SUMMARY: The Merit.../service-contract-inventories-guidance-11052010.pdf . The MSPB's inventory is posted on its Web site at...

The order and volume fill rates in inventory control systems

DEFF Research Database (Denmark)

Thorstenson, Anders; Larsen, Christian

2011-01-01

This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total quantities the order fill rate would be the preferred service level...... measure. The main result shows how the order and volume fill rates are related in magnitude. Earlier results derived for a single-item, single-stage, continuous review inventory system with backordering and constant lead times controlled by a base-stock policy are extended in different directions...

Optimal strategy analysis based on robust predictive control for inventory system with random demand

Science.gov (United States)

Saputra, Aditya; Widowati, Sutrisno

2017-12-01

In this paper, the optimal strategy for a single product single supplier inventory system with random demand is analyzed by using robust predictive control with additive random parameter. We formulate the dynamical system of this system as a linear state space with additive random parameter. To determine and analyze the optimal strategy for the given inventory system, we use robust predictive control approach which gives the optimal strategy i.e. the optimal product volume that should be purchased from the supplier for each time period so that the expected cost is minimal. A numerical simulation is performed with some generated random inventory data. We simulate in MATLAB software where the inventory level must be controlled as close as possible to a set point decided by us. From the results, robust predictive control model provides the optimal strategy i.e. the optimal product volume that should be purchased and the inventory level was followed the given set point.

Life cycle inventory analysis of fossil energies in Japan

International Nuclear Information System (INIS)

Yoon Sungyee; Yamada, Tatsuya

1999-01-01

Given growing concerns over global warming problems in recent years, a matter of great importance has been to grasp GHG emissions from fossil energy use as accurately as possible by figuring out how much GHGs result from a life cycle (production, transportation and consumption) of various fossil energies. The objective of this study is to make a life cycle inventory (LCI) analysis of major fossil energies (coal, oil, LNG, LPG) consumed in Japan pursuant to ISO 14040. On these fossil energies imported to Japan in 1997, LCI analysis results of GHG emissions (specifically carbon dioxide and methane) put CO 2 intensity during their combustion stage (gross heat value basis) at 100:121:138:179 among LNG:LPG:oil:coal. But, in life cycle terms, the ratios turned to be 100:110:120:154. The world average (gross heat value basis) gained from IPCC data, among others, puts the ratios among LNG:LPG:oil:coal at 100:105:110:151. In comparison, our study that focused on Japan found their corresponding figures at 100:110:120:154. COP 3 set forth country-by-country targets. Yet, global warming, that is a worldwide problem, also requires a more comprehensive assessment based on a life cycle analysis (LCA). The estimation results of our study can be of some help in shaping some criteria when considering energy and environmental policies from a global viewpoint. In addition, our study results suggest the importance of the best energy mix that is endorsed by LCI analysis results, if global warming abatement efforts should successfully be in advance. As specific institutional designs of Kyoto Mechanism are currently under examination, the introduction of LCI method deserves to be considered in discussing the baseline issue of joint implementation and clean development mechanism. In the days ahead, by gathering and analysing detailed-ever data, and through fossil-energy LCA by use, we had better consider supply and demand of the right energies in the right uses. (author)

Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)—CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description

DEFF Research Database (Denmark)

Kellens, Karel; Dewulf, Wim; Overcash, Michael

2012-01-01

the provision of high-quality data for LCA studies of products using these unit process datasets for the manufacturing processes, as well as the in-depth analysis of individual manufacturing unit processes.In addition, the accruing availability of data for a range of similar machines (same process, different......This report proposes a life-cycle analysis (LCA)-oriented methodology for systematic inventory analysis of the use phase of manufacturing unit processes providing unit process datasets to be used in life-cycle inventory (LCI) databases and libraries. The methodology has been developed...... and resource efficiency improvements of the manufacturing unit process. To ensure optimal reproducibility and applicability, documentation guidelines for data and metadata are included in both approaches. Guidance on definition of functional unit and reference flow as well as on determination of system...

SACHET, Dynamic Fission Products Inventory in PWR Multiple Compartment System

International Nuclear Information System (INIS)

Kodaira, Hideki

1990-01-01

1 - Description of program or function: SACHET evaluates the dynamic fission product inventories in the multiple compartment system of pressurized water reactor (PWR) plants. 2 - Method of solution: SACHET utilizes a matrix of fission product core inventory which is previously calculated by the ORIGEN code. 3 - Restrictions on the complexity of the problem: Liquid wastes such as chemical waste and detergent waste are not included

METAHEURISTICS FOR OPTIMIZING SAFETY STOCK IN MULTI STAGE INVENTORY SYSTEM

Directory of Open Access Journals (Sweden)

Gordan Badurina

2013-02-01

Full Text Available Managing the right level of inventory is critical in order to achieve the targeted level of customer service, but it also carries significant cost in supply chain. In majority of cases companies define safety stock on the most downstream level, i.e. the finished product level, using different analytical methods. Safety stock on upstream level, however, usually covers only those problems which companies face on that particular level (uncertainty of delivery, issues in production, etc.. This paper looks into optimizing safety stock in a pharmaceutical supply considering the three stages inventory system. The problem is defined as a single criterion mixed integer programming problem. The objective is to minimize the inventory cost while the service level is predetermined. In order to coordinate inventories at all echelons, the variable representing the so-called service time is introduced. Because of the problem dimensions, metaheuristics based on genetic algorithm and simulated annealing are constructed and compared, using real data from a Croatian pharmaceutical company. The computational results are presented evidencing improvements in minimizing inventory costs.

Multi-echelon Repair Inventory Systems: Select Issues in Modular Electronic Equipment

OpenAIRE

Amik Garg; S. G. Deshmukh

2010-01-01

Flow of modules/printed circuit boards (PCBs) in a multi-echelon repair inventory system pertaining to modular electronic equipment for large maintenance organisations having large inventory in range and depth, like defence has been critically examined using a case study. Desirable features of the proposed system are identified and a general framework suggested for examining its feasibility and implementation in an organisation. An analytical model with an objective to reduce number of echelo...

Dynamic inventory rationing strategies for inventory systems with two demand classes, Poisson demand and backordering

NARCIS (Netherlands)

Teunter, Ruud H.; Haneveld, Willem K. Klein

2008-01-01

We study inventory systems with two demand classes (critical and non-critical), Poisson demand and backordering. We analyze dynamic rationing strategies where the number of items reserved for critical demand depends on the remaining time until the next order arrives. Different from results in the

Inventory information approval system certification and flexible spending account purchases.

Science.gov (United States)

Shuey, Brandon; Williams, La Vonn A

2010-01-01

There is no question that 2009 was a year of change within the pharmacy industry. Several new requirements were implemented, including the need for an Inventory Information Approval System for accepting flexible spending or health reimbursement account cords. Some pharmacies relied on the 90% exemption rule, which is discussed within this article, or an alternative method to avoid the expense of a point of sale. However, with flexible spending or health reimbursement account card participation expected to reach 85% in 2010, now bay be the time for compounding pharmacists to weigh the pros and cons of Inventory Information Approval System certification.

Inventory control strategies

International Nuclear Information System (INIS)

Primrose, D.

1998-01-01

Finning International Inc. is in the business of selling, financing and servicing Caterpillar and complementary equipment. Its main markets are in western Canada, Britain and Chile. This paper discusses the parts inventory strategies system for Finning (Canada). The company's territory covers British Columbia, Alberta, the Yukon and the Northwest Territories. Finning's parts inventory consists of 80,000 component units valued at more than $150 M. Distribution centres are located in Langley, British Columbia and Edmonton, Alberta. To make inventory and orders easier to control, Finning has designed a computer-based system, with software written exclusively for Caterpillar dealers. The system makes use of a real time electronic interface with all Finning locations, plus all Caterpillar facilities and other dealers in North America. Details of the system are discussed, including territorial stocking procedures, addition to stock, exhaustion of stock, automatic/suggest order controls, surplus inventory management, and procedures for jointly managed inventory. 3 tabs., 1 fig

Design of books inventory with RFID antenna in library management system

Directory of Open Access Journals (Sweden)

Cheng Ching-Chien

2017-01-01

Full Text Available A 915 MHz printed radio-frequency-identification (RFID antennas with the characteristics of good gain and omnidirectional beam wave is constructed and evaluated in this study. The objective is to find out their best reading rates for providing effective wireless communications among RFID antenna during the library book inventory process. And an optimal library inventory system which is based on electromagnetic identification (EMID technology is proposed, which is constructed to find the optimal tag location for a book, test the tag readability for bookshelves, and connect a couple of multi-layer bookshelves with multiplexers and updat the tag reading status in the database of the computer terminal. The fabricated antenna reader and the proposed system are embedded into different locations of bookshelves and tested at the library of Cheng Shiu University in Taiwan. According to the experimental results, the designed prototype of the antenna reader has the characteristics of the directional radiation pattern, good gain, simple shape, low cost and is easy to be integrated into the bookshelf. And the designed library inventory system can authenticate the location of a book automatically. They can benefit administrating librarians with the capabilities of decreasing the library inventory processing time and reducing the possibility of the books being misplaced.

General technical requirements (GTR) for inventory monitoring systems (IMS) for the trilateral initiative

International Nuclear Information System (INIS)

Pshakin, Gennady M.; Kuleshov, I.; Shea, T.; Puckett, J.M.; Zhukov, I.; Mangan, Dennis L.; Matter, John C.; Waddoups, I.; Smathers, D.; Abhold, M.E.; Hsue, S.-T.; Chiaro, P.

2002-01-01

Pursuant to the Trilateral Initiative, the three parties (The Russian Federation, the United States, and the International Atomic Energy Agency) have been engaged in discussions concerning the structure of reliable monitoring systems for storage facilities having large inventories. The intent of these monitoring systems is to provide the capability for the IAEA to maintain continuity of knowledge in a sufficiently reliable manner that should there be equipment failure, loss of continuity of knowledge would be restricted to a small population of the inventory, and thus reinventory of the stored items would be minimized These facility-specific monitoring systems, referred to as Inventory Monitoring Systems (IMS) are to provide the principal means for the M A to assure that the containers of fissile material remain accounted under the Verification Agreements which are to be concluded between the IAEA and the Russian Federation and the lAEA and the United States for the verification of weapon-origin and other fissile material specified by each State as released from its defense programs. A technical experts working group for inventory monitoring systems has been meeting since Feb- of 2000 to formulate General Technical Requirements (GTR) for Inventory Monitoring Systems for the Trilateral Initiative. Although provisional agreement has been reached by the three parties concerning the GTR, it is considered a living document that can be updated as warranted by the three parties. This paper provides a summary of the GTR as it currently exists.

Physical inventory by use of modeling for the tritium aqueous waste recovery system

International Nuclear Information System (INIS)

Sienkiewicz, C.J.; Lentz, J.E.; Wiggins, D.V.

1988-01-01

Physical inventory requirements for the Tritium Aqueous Waste Recovery System (TAWRS) presented constraints that required unique solutions. Available analytical techniques for which sound measurement control practices existed could not be readily adapted to the system without significant modifications and expense. Based on the assumption that would accurately estimate total system inventory given a few key measurements, a model was developed for TAWRS. Tritium concentrations in two streams, the tritiated feed stream to the process and the tritiated hydrogen stream generated by the electrolysis cells, provided the key values to the model. The proposed mathematical model relates the tritium concentration throughout the system to the tritium concentration in these two streams. Testing of the system using low-level tritiated feed water was conducted to characterize tritium distribution in the system and to relate key values to total inventory. 4 refs., 2 figs.,

A heuristic for the inventory management of smart vending machine systems

Directory of Open Access Journals (Sweden)

Yang-Byung Park

2012-12-01

Full Text Available Purpose: The purpose of this paper is to propose a heuristic for the inventory management of smart vending machine systems with product substitution under the replenishment point, order-up-to level policy and to evaluate its performance.Design/methodology/approach: The heuristic is developed on the basis of the decoupled approach. An integer linear mathematical model is built to determine the number of product storage compartments and replenishment threshold for each smart vending machine in the system and the Clarke and Wright’s savings algorithm is applied to route vehicles for inventory replenishments of smart vending machines that share the same delivery days. Computational experiments are conducted on several small-size test problems to compare the proposed heuristic with the integrated optimization mathematical model with respect to system profit. Furthermore, a sensitivity analysis is carried out on a medium-size test problem to evaluate the effect of the customer service level on system profit using a computer simulation.Findings: The results show that the proposed heuristic yielded pretty good solutions with 5.7% error rate on average compared to the optimal solutions. The proposed heuristic took about 3 CPU minutes on average in the test problems being consisted of 10 five-product smart vending machines. It was confirmed that the system profit is significantly affected by the customer service level.Originality/value: The inventory management of smart vending machine systems is newly treated. Product substitutions are explicitly considered in the model. The proposed heuristic is effective as well as efficient. It can be easily modified for application to various retail vending settings under a vendor-managed inventory scheme with POS system.

Detailed CATHENA Model of the Wolsong 1 Pressure and Inventory Control System

Energy Technology Data Exchange (ETDEWEB)

Cha, K.H. [Korea Electric Power Research Institute, Taejon (Korea)

2002-07-01

The Detailed CATHENA model of Wolsong 1 is development to be able to simulate a theramal hydraulic behavior of heat transport system(HTS) Pressure and Inventory Control System(PNIC) at any power operation condition and during transient events such as mall LOCA(small loss of coolant inventory and small breaks in the primary system piping) and non-LOCA(loss of reactivity regulation, loss of flow, loss if Class IV power, loss of PNIC). (author). 12 refs., 7 figs., 6 tabs.

Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

Science.gov (United States)

Fitriana, Rina; Moengin, Parwadi; Riana, Mega

2016-02-01

Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

The relationship between life satisfaction, self-consciousness, and the Myers-Briggs type inventory dimensions.

Science.gov (United States)

Harrington, R; Loffredo, D A

2001-07-01

The study was an investigation of the relationship between psychological well-being, life satisfaction, self-consciousness, and the four Myers-Briggs Type Indicator dimensions (MBTI; I. B. Myers & M. H. McCaulley, 1985). The participants were 97 college students (79 women and 18 men whose mean age was 31.4 years). All the students were administered four instruments, the Psychological Well-Being Inventory (C. D. Ryff, 1989), the Satisfaction With Life Scale (E. Diener, R. A. Emmons, R. J. Larsen, & S. Griffin, 1985), the Self-Consciousness Scale-Revised (M. F. Scheier & C. S. Carver, 1985), and the MBTI (Form G Self-Scoring). MANOVAs revealed significant differences on three of the four dimensions of the MBTI with extraverts showing higher psychological well-being and life satisfaction and lower self-consciousness than introverts. Intuition types scored higher in psychological well-being and lower in self-consciousness than Sensing types. Judging types scored higher in psychological well-being than Perceiving types. Correlational analyses showed that most dimensions of psychological well-being were negatively related to self-consciousness. The relationship between life satisfaction and personality variables is discussed.

Acquisition Pricing and Inventory Decisions on Dual-Source Spare-Part System with Final Production and Remanufacturing

Directory of Open Access Journals (Sweden)

Yancong Zhou

2016-01-01

Full Text Available The life spans of durable goods are longer than their warranty periods. To satisfy the service demand of spare parts and keep the market competition advantage, enterprises have to maintain the longer inventory planning of spare parts. However, how to obtain a valid number of spare parts is difficult for those enterprises. In this paper, we consider a spare-part inventory problem, where the inventory can be replenished by two ways including the final production order and the remanufacturing way. Especially for the remanufacturing way, we consider the acquisition management problem of used products concerning an acquisition pricing decision. In a multiperiod setting, we formulate the problem into a dynamic optimization problem, where the system decisions include the final production order and acquisition price of used products at each period. By stochastic dynamic programming, we obtain the optimal policy of the acquisition pricing at each period and give the optimal policy structure of the optimization problem at the first period. Then, a recursion algorithm is designed to calculate the optimal decisions and the critical points in the policy. Finally, the numerical analyses show the effects of demand information and customer’s sensitive degree on the related decisions and the optimal cost.

Decomissioning of nuclear reactors - methods for calculation of radionuclide inventories in contaminated BWR systems

International Nuclear Information System (INIS)

Lundgren, K.

1991-01-01

The purpose of the study has been to develop and demonstrate calculation models for the prediction of radionuclide inventories in contaminated systems in the Nordic BWRs at the time of decommissioning. Oskarshamn 2 was selected as reference reactor for the study. The study is divided in radionuclide inventories of activated corrosion products, and inventories of fission products and actinides from leaking fuel. The study is restricted to contamination outside the reactor pressure vessel. Inventories of activated corrosion products on primary system surfaces were predicted with the ABB Atom computer code BKM-CRUD. The calculations were performed for an extended operation time up to year 2010 for the nuclides Co60, Co58, Zn65 and Mn54. A special set of calculations were also made covering the non-standard nuclides Fe55, Ni59, No63 and Mo93. ABB Atom has carried out a comprehensive program on shutdown dose rates and activity measurements in delivered BWRs. The resulting data base have been used in the study to derive conversion factors for evaluation of contamination levels in secondary systems from the BKM-CRUD results for primary systems. Fission products and actinides were treated by defining two different fuel leakage scenarios. The first one corresponds to a rather stable situation, with an average leakage rate of 1 'standard pin hole' (i.e. 2 MBq/s Xe133). The second scenario means more severe fuel leakage every 10 years (200 MBq/s Xe133). The radioactive inventories in different part of the plant were calculated by combining the surface areas with the calculated contamination levels in the different systems. The uncertainty in total activity inventory has been estimated to not exceed a factor of 2. The uncertainty in total activity inventory has been to not exceed a factor of 2. The estimated inventories in this study has been compared to the results from other studies, and a reasonable agreement was achieved

Build Your Own Inventory System. Annual Cost: $100.00 (Approximate). Fixed Assets, Materials and Supplies. The Practical Elements for a Computerized, Continuing Inventory System in Schools and Use in Determining a Measure for Instructional Cost.

Science.gov (United States)

Payne, Arnold, Comp.

This publication presents performance flow charts and other accompanying forms that are elements of an economical computerized continuing inventory system. The system described here is intended to serve school systems as an adequate fixed asset system and to provide a computerized inventory model that offers support for costs of future educational…

Particle Swarm Optimization Approach in a Consignment Inventory System

Science.gov (United States)

Sharifyazdi, Mehdi; Jafari, Azizollah; Molamohamadi, Zohreh; Rezaeiahari, Mandana; Arshizadeh, Rahman

2009-09-01

Consignment Inventory (CI) is a kind of inventory which is in the possession of the customer, but is still owned by the supplier. This creates a condition of shared risk whereby the supplier risks the capital investment associated with the inventory while the customer risks dedicating retail space to the product. This paper considers both the vendor's and the retailers' costs in an integrated model. The vendor here is a warehouse which stores one type of product and supplies it at the same wholesale price to multiple retailers who then sell the product in independent markets at retail prices. Our main aim is to design a CI system which generates minimum costs for the two parties. Here a Particle Swarm Optimization (PSO) algorithm is developed to calculate the proper values. Finally a sensitivity analysis is performed to examine the effects of each parameter on decision variables. Also PSO performance is compared with genetic algorithm.

Modelling of pesticide emissions for Life Cycle Inventory analysis: Model development, applications and implications

DEFF Research Database (Denmark)

Dijkman, Teunis Johannes

with variations in the climates and soils present in Europe. Emissions of pesticides to surface water and groundwater calculated by PestLCI 2.0 were compared with models used for risk assessment. Compared to the MACRO module in SWASH 3.1 model, which calculates surface water emissions by runoff and drainage...... chromatographic flow of water through the soil), which was attributed to the omission of emissions via macropore flow in the latter model. The comparison was complicated by the fact that the scenarios used were not fully identical. In order to quantify the implications of using PestLCI 2.0, human toxicity......The work presented in this thesis deals with quantification of pesticide emissions in the Life Cycle Inventory (LCI) analysis phase of Life Cycle Assessment (LCA). The motivation to model pesticide emissions is that reliable LCA results not only depend on accurate impact assessment models, but also...

Optimal inventory policy in a closed loop supply chain system with multiple periods

International Nuclear Information System (INIS)

Sasi Kumar, A.; Natarajan, K.; Ramasubramaniam, Muthu Rathna Sapabathy.; Deepaknallasamy, K.K.

2017-01-01

Purpose: This paper aims to model and optimize the closed loop supply chain for maximizing the profit by considering the fixed order quantity inventory policy in various sites at multiple periods. Design/methodology/approach: In forward supply chain, a standard inventory policy can be followed when the product moves from manufacturer, distributer, retailer and customer but the inventory in the reverse supply chain of the product with the similar standard policy is very difficult to manage. This model investigates the standard policy of fixed order quantity by considering the three major types of return-recovery pair such as commercial returns, end- of- use returns, end –of- life returns and their inventory positioning at multiple periods. The model is configured as mixed integer linear programming and solved by IBM ILOG CPLEX OPL studio. Findings: To find the performance of the model a numerical example is considered for a product with three Parts (A which of 2nos, B and C) for 12 multiple periods. The results of the analysis show that the manufacturer can know how much should to be manufacture in multiple periods based on Variations of the demand by adopting the FOQ inventory policy at different sites considering its capacity constraints. In addition, it is important how much of parts should be purchased from the supplier at the given 12 periods. Originality/value: A sensitivity analysis is performed to validate the proposed model two parts. First part of the analysis will focus on the inventory of product and parts and second part of analysis focus on profit of the company. The analysis which provides some insights in to the structure of the model.

Optimal inventory policy in a closed loop supply chain system with multiple periods

Energy Technology Data Exchange (ETDEWEB)

Sasi Kumar, A.; Natarajan, K.; Ramasubramaniam, Muthu Rathna Sapabathy.; Deepaknallasamy, K.K.

2017-07-01

Purpose: This paper aims to model and optimize the closed loop supply chain for maximizing the profit by considering the fixed order quantity inventory policy in various sites at multiple periods. Design/methodology/approach: In forward supply chain, a standard inventory policy can be followed when the product moves from manufacturer, distributer, retailer and customer but the inventory in the reverse supply chain of the product with the similar standard policy is very difficult to manage. This model investigates the standard policy of fixed order quantity by considering the three major types of return-recovery pair such as commercial returns, end- of- use returns, end –of- life returns and their inventory positioning at multiple periods. The model is configured as mixed integer linear programming and solved by IBM ILOG CPLEX OPL studio. Findings: To find the performance of the model a numerical example is considered for a product with three Parts (A which of 2nos, B and C) for 12 multiple periods. The results of the analysis show that the manufacturer can know how much should to be manufacture in multiple periods based on Variations of the demand by adopting the FOQ inventory policy at different sites considering its capacity constraints. In addition, it is important how much of parts should be purchased from the supplier at the given 12 periods. Originality/value: A sensitivity analysis is performed to validate the proposed model two parts. First part of the analysis will focus on the inventory of product and parts and second part of analysis focus on profit of the company. The analysis which provides some insights in to the structure of the model.

Optimal inventory policy in a closed loop supply chain system with multiple periods

Directory of Open Access Journals (Sweden)

SasiKumar A.

2017-05-01

Full Text Available Purpose: This paper aims to model and optimize the closed loop supply chain for maximizing the profit by considering the fixed order quantity inventory policy in various sites at multiple periods. Design/methodology/approach: In forward supply chain, a standard inventory policy can be followed when the product moves from manufacturer, distributer, retailer and customer but the inventory in the reverse supply chain of the product with the similar standard policy is very difficult to manage. This model investigates the standard policy of fixed order quantity by considering the three major types of return-recovery pair such as commercial returns, end- of- use returns, end –of- life returns and their inventory positioning at multiple periods.  The model is configured as mixed integer linear programming and solved by IBM ILOG CPLEX OPL studio. Findings: To find the performance of the model a numerical example is considered for a product with three Parts (A which of 2nos, B and C for 12 multiple periods. The results of the analysis show that the manufacturer can know how much should to be manufacture in multiple periods based on Variations of the demand by adopting the FOQ inventory policy at different sites considering its capacity constraints. In addition, it is important how much of parts should be purchased from the supplier at the given 12 periods. Originality/value: A sensitivity analysis is performed to validate the proposed model two parts. First part of the analysis will focus on the inventory of product and parts and second part of analysis focus on profit of the company. The analysis which provides some insights in to the structure of the model.

Comparison of Inventory Systems with Service, Positive Lead-Time, Loss, and Retrial of Customers

Directory of Open Access Journals (Sweden)

A. Krishnamoorthy

2007-01-01

Full Text Available We analyze and compare three (s,S inventory systems with positive service time and retrial of customers. In all of these systems, arrivals of customers form a Poisson process and service times are exponentially distributed. When the inventory level depletes to s due to services, an order of replenishment is placed. The lead-time follows an exponential distribution. In model I, an arriving customer, finding the inventory dry or server busy, proceeds to an orbit with probability γ and is lost forever with probability (1−γ. A retrial customer in the orbit, finding the inventory dry or server busy, returns to the orbit with probability δ and is lost forever with probability (1−δ. In addition to the description in model I, we provide a buffer of varying (finite capacity equal to the current inventory level for model II and another having capacity equal to the maximum inventory level S for model III. In models II and III, an arriving customer, finding the buffer full, proceeds to an orbit with probability γ and is lost forever with probability (1−γ. A retrial customer in the orbit, finding the buffer full, returns to the orbit with probability δ and is lost forever with probability (1−δ. In all these models, the interretrial times are exponentially distributed with linear rate. Using matrix-analytic method, we study these inventory models. Some measures of the system performance in the steady state are derived. A suitable cost function is defined for all three cases and analyzed using graphical illustrations.

Instrument translation and initial psychometric evaluation of the Danish Body Image Quality of Life Inventory

DEFF Research Database (Denmark)

Rasmussen, Trine Bernholdt; Berg, Selina Kikkenborg; Dixon, Jane

2016-01-01

. The purpose of the study was thus to translate and validate a Danish version of the Body Image Quality of Life Inventory (BIQLI), in order to obtain a valid instrument applicable for healthcare research. METHODS: The study consisted of two phases: (i) instrument adaptation, including forward and back...... to be semantically sound, yet concerns about face validity did arise through cognitive interviews. Danish college students (n = 189, 65 men, Mage = 21.1 years) participated in the piloting of the BIQLI-DA. Convergent construct validity was demonstrated through associations to related constructs. Exploratory factor...

Automated refueling inventory control system at FFTF

International Nuclear Information System (INIS)

Ordonez, C.R.

1983-10-01

The Refueling Inventory Control System (RICS) at the Fast Flux Test Facility (FFTF) keeps track of all assemblies that reside in the various refueling facilities. The automated RICS allows the user to obtain information regarding any assembly under its control by displaying the data on a screen. It also provides a simulation mode which allows assembly moves on a duplicated data base. This simulation is used to verify the refueling documentation before it is issued

Valuation of inventories in systems with product recovery

OpenAIRE

Teunter, Ruud; Laan, Erwin

2003-01-01

textabstractValuation of inventories has different purposes, in particular accounting and decision making, and it is not necessary for a firm to use the same valuation method for both purposes. In fact, it is not uncommon to use accounting books as well as management books. In this chapter, we will only consider inventory values from the perspective of decision making. More specifically, we will analyze the effect of inventory valuation on inventory control decisions (and not the correspondin...

Dynamic Pricing and Production Control of an Inventory System with Remanufacturing

Directory of Open Access Journals (Sweden)

Chunyan Gao

2015-01-01

Full Text Available We consider optimal pricing and manufacturing control of a continuous-review inventory system with remanufacturing. Customer demand and product return follow independent Poisson processes. Customer demand is filled by serviceable product, which can be either manufactured or remanufactured from the returned product. The lead times for both manufacturing and remanufacturing are exponentially distributed. The objective is to maximize the expected total discounted profit over an infinite planning horizon. We characterize the structural properties of the optimal policy through the optimality equation. Specifically, the optimal manufacturing policy is a base-stock policy with the base-stock level nonincreasing in the return inventory level. The optimal pricing policy is also a threshold policy, where the threshold level is nonincreasing in the return inventory level.

A replenishment policy for a perishable inventory system based on estimated aging and retrieval behavior

NARCIS (Netherlands)

Broekmeulen, R.A.C.M.; Donselaar, van K.H.

2007-01-01

So far the literature on inventory control for perishable products has mainly focused on (near-) optimal replenishment policies for a stylized environment, assuming no leadtime, no lot-sizing, stationary demand, a first in first out retrieval policy and/or product life time equal to two periods.

Review of inventory systems with deterioration since 2001

NARCIS (Netherlands)

Bakker, M.; Riezebos, J.; Teunter, R.H.

2012-01-01

This paper presents an up-to-date review of the advances made in the field of inventory control of perishable items (deteriorating inventory). The last extensive review on this topic dates back to 2001 (Goyal S.K. and Giri B.C., Recent trends in modeling of deteriorating inventory, European Journal

Status of life cycle inventories for batteries

International Nuclear Information System (INIS)

Sullivan, J.L.; Gaines, L.

2012-01-01

Highlights: ► Cradle-to-gate (ctg) energy and emissions compared among five battery systems. ► Calculate material production values fall well within observed ranges. ► Values based on recycled materials in poor agreement with observed ranges. ► Material production data needed for recycled and some virgin battery materials. ► Battery manufacturing data range widely and hence also need updating. - Abstract: This study reviews existing life-cycle inventory (LCI) results for cradle-to-gate (ctg) environmental assessments of lead-acid (PbA), nickel–cadmium (NiCd), nickel-metal hydride (NiMH), sodium-sulfur (Na/S), and lithium-ion (Li-ion) batteries. LCI data are evaluated for the two stages of cradle-to-gate performance: battery material production and component fabrication and assembly into purchase ready batteries. Using existing production data on battery constituent materials, overall battery material production values were calculated and contrasted with published values for the five battery technologies. The comparison reveals a more prevalent absence of material production data for lithium ion batteries, though such data are also missing or dated for a few important constituent materials in nickel metal hydride, nickel cadmium, and sodium sulfur batteries (mischmetal hydrides, cadmium, β-alumina). Despite the overall availability of material production data for lead acid batteries, updated results for lead and lead peroxide are also needed. On the other hand, LCI data for the commodity materials common to most batteries (steel, aluminum, plastics) are up to date and of high quality, though there is a need for comparable quality data for copper. Further, there is an almost total absence of published LCI data on recycled battery materials, an unfortunate state of affairs given the potential benefit of battery recycling. Although battery manufacturing processes have occasionally been well described, detailed quantitative information on energy and

A data communications systems for tamper-protected special nuclear materials (SNM) inventory management

International Nuclear Information System (INIS)

Hurkamp, A.C.

1995-01-01

The Department of Energy (D.O.E.) is responsible for the long term storage and protection of large quantities of Special Nuclear Material (SNM). This material is stored within individual containers located in vaults. Security measures are required to ensure that the SNM remains within the canisters where it is stored and that it is not disturbed in any manner. Conventional security and inventory techniques are manpower intensive and often require exposure to radiation hazards. The Purpose of this D.O.E sponsored project is to develop a cost effective system to monitor Special Nuclear Materials that, when fielded, would result in an extension of manual inventory cycles at a wide variety of SNM storage locations. The system consists of a computer, radio frequency interrogator, and individual miniaturized radio frequency transponders (tags) that are co-located with individual SNM containers. Each tag can perform SNM inventory, tamper alarm, and multiple sensor data transmission to the interrogator under the control of software designed by the user. SNM custodians can customize the system by their choice of packaging, software, and sensors. When implemented in accordance with current department of energy (D.O.E.) Policy on SNM inventory extension, the system has the potential to qualify for maximum extension times thus saving considerable resources through reduction of radiation exposure

Psychometric Properties of Newly Translated Spanish Life Events Inventory and Daily Hassles Scale.

Science.gov (United States)

Hannan, Jean; Youngblut, JoAnne M; Brooten, Dorothy; Bazzani, Dianne; Romero, Norma R; Chavez, Blanca; Picanes, Joann

2015-01-01

Measuring stress in Hispanic Americans, the fastest growing U.S. minority, is problematic. The Life Events Inventory (LEI) and the Daily Hassles Scale (DHS), widely used stress instruments, are not available in Spanish. To test the psychometric properties of the translated Spanish versions of the LEI and DHS. A convenience sample of 63 Hispanic women completed both instruments in Spanish and English 2 weeks apart. Internal consistency reliability and stability were strong for both instruments (.85-.97). Reliability and validity evidence for the translated Spanish versions were strong and similar to the English version. Psychometric findings suggest that the newly translated Spanish versions are good representations of the English versions and that these newly translated instruments are ready for use.

Changing an automated drug inventory control system to a data base design.

Science.gov (United States)

Bradish, R A

1982-09-01

A pharmacy department's change from indexed sequential access files to a data base management system (DBMS) for purposes of automated inventory control is described. The DBMS has three main functional areas: (1) inventory ordering and accountability, (2) charging of interdepartmental and intradepartmental orders, and (3) data manipulation with report design for management control. There are seven files directly related to the inventory ordering and accountability area. Each record can be accessed directly or through another file. Information on the quantity of a drug on hand, drug(s) supplied by a specific vendor, status of a purchase order, or calculation of an estimated order quantity can be retrieved quickly. In the drug master file, two records contain a reorder point and safety-stock level that are determined by searching the entries in the order history file and vendor master file. The intradepartmental and interdepartmental orders section contains five files assigned to record and store information on drug distribution. All items removed from the stockroom and distributed are recorded, and reports can be generated for itemized bills, total cost by area, and as formatted files for the accounts payable department. The design, development, and implementation of the DBMS took approximately a year using a part-time pharmacist and minimal outside help, while the previous system required constant expensive help of a programmer/analyst. The DBMS has given the pharmacy department a flexible inventory management system with increased drug control, decreased operating expenses, increased use of department personnel, and the ability to develop and enhance other systems.

Optimal fuel inventory strategies

International Nuclear Information System (INIS)

Caspary, P.J.; Hollibaugh, J.B.; Licklider, P.L.; Patel, K.P.

1990-01-01

In an effort to maintain their competitive edge, most utilities are reevaluating many of their conventional practices and policies in an effort to further minimize customer revenue requirements without sacrificing system reliability. Over the past several years, Illinois Power has been rethinking its traditional fuel inventory strategies, recognizing that coal supplies are competitive and plentiful and that carrying charges on inventory are expensive. To help the Company achieve one of its strategic corporate goals, an optimal fuel inventory study was performed for its five major coal-fired generating stations. The purpose of this paper is to briefly describe Illinois Power's system and past practices concerning coal inventories, highlight the analytical process behind the optimal fuel inventory study, and discuss some of the recent experiences affecting coal deliveries and economic dispatch

The Aspects Of Inventory Controlling Instruments Implementation In The System Of Retail Chains Finance Management

OpenAIRE

Nataliya Buratchuk

2014-01-01

The article deals with issues of implementation of inventory controlling instruments in the system of retail chains finance management. The author suggests expanded classification of methods and instruments of inventory controlling distinguishing 3 groups of specific instruments: logistic controlling instruments, expenditures and supply chains controlling instruments and inventory special controlling mechanisms. Based on investigation of controlling methods and instruments, the approximate li...

Integrated quality status and inventory tracking system for FFTF driver fuel pins

International Nuclear Information System (INIS)

Gottschalk, G.P.

1979-11-01

An integrated system for quality status and inventory tracking of Fast Flux Test Facility (FFTF) driver fuel pins has been developed. Automated fuel pin identification systems, a distributed computer network, and a data base are used to implement the tracking system

Life cycle inventory of manufacturing prefinished engineered wood flooring in eastern U.S. with comparison to solid strip wood flooring

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2011-01-01

Building products have come under increased scrutiny because of environmental impacts from their manufacture. Our study followed the life cycle inventory approach for prefinished engineered wood flooring in the eastern US and compared the results with those of solid strip wood flooring. Our study surveyed five engineered wood flooring manufacturers in the eastern US....

Interactive Inventory Monitoring

Science.gov (United States)

Garud, Sumedha

2013-01-01

Method and system for monitoring present location and/or present status of a target inventory item, where the inventory items are located on one or more inventory shelves or other inventory receptacles that communicate with an inventory base station through use of responders such as RFIDs. A user operates a hand held interrogation and display (lAD) module that communicates with, or is part of the base station to provide an initial inquiry. lnformation on location(s) of the larget invenlory item is also indicated visibly and/or audibly on the receptacle(s) for the user. Status information includes an assessment of operation readiness and a time, if known, that the specified inventory item or class was last removed or examined or modified. Presentation of a user access level may be required for access to the target inventgory item. Another embodiment provides inventory informatin for a stack as a sight-impaired or hearing-impaired person adjacent to that stack.

Markovian inventory model with two parallel queues, jockeying and impatient customers

Directory of Open Access Journals (Sweden)

Jeganathan K.

2016-01-01

Full Text Available This article presents a perishable stochastic inventory system under continuous review at a service facility consisting of two parallel queues with jockeying. Each server has its own queue, and jockeying among the queues is permitted. The capacity of each queue is of finite size L. The inventory is replenished according to an (s; S inventory policy and the replenishing times are assumed to be exponentially distributed. The individual customer is issued a demanded item after a random service time, which is distributed as negative exponential. The life time of each item is assumed to be exponential. Customers arrive according to a Poisson process and on arrival; they join the shortest feasible queue. Moreover, if the inventory level is more than one and one queue is empty while in the other queue, more than one customer are waiting, then the customer who has to be received after the customer being served in that queue is transferred to the empty queue. This will prevent one server from being idle while the customers are waiting in the other queue. The waiting customer independently reneges the system after an exponentially distributed amount of time. The joint probability distribution of the inventory level, the number of customers in both queues, and the status of the server are obtained in the steady state. Some important system performance measures in the steady state are derived, so as the long-run total expected cost rate.

Hanford inventory program user's manual

International Nuclear Information System (INIS)

Hinkelman, K.C.

1994-01-01

Provides users with instructions and information about accessing and operating the Hanford Inventory Program (HIP) system. The Hanford Inventory Program is an integrated control system that provides a single source for the management and control of equipment, parts, and material warehoused by Westinghouse Hanford Company in various site-wide locations. The inventory is comprised of spare parts and equipment, shop stock, special tools, essential materials, and convenience storage items. The HIP replaced the following systems; ACA, ASP, PICS, FSP, WSR, STP, and RBO. In addition, HIP manages the catalog maintenance function for the General Supplies inventory stocked in the 1164 building and managed by WIMS

A TWO-PRODUCT INVENTORY SYSTEM WITH PRODUCT INTERACTION

Directory of Open Access Journals (Sweden)

J. Yadavalli

2012-01-01

Full Text Available

ENGLISH ABSTRACT: In this paper, we study a two-component continuous review inventory system. We assume that demand occurs according to a Poisson process and that a demand can be satisfied only if both the components are available in the inventory. Back-orders are not permitted. We assume that the lead-time distribution of one product is arbitrary and the other is exponential. Identifying the underlying process as a semi-regeneration process we find the stationary distribution of the inventory level, the performance measures such as mean stationary rate of number of lost demands, the demands and the reorders made. A numerical example illustrates the results.

AFRIKAANSE OPSOMMING: Die artikel ondersoek 'n tweekomponent- deurlopende oorsigvoorraadstelsel. Daar word aanvaar dat aanvraag 'n Poissonproses is en dat aanvraag slegs bevredig kan word indien beide die komponente in die voorraad beskikbaar is. Agterstallige bestellings word nie toegelaat nie. Daar word aanvaar dat die lewertydverdeling van die een produk arbitrêr en die ander eksponensieël is. Indien die onderliggende proses as 'n semigenerasieproses geïdentifiseer word, kan die stasionêre verspreiding van die voorraadvlak bepaal word. Maatstawwe van vertoning soos mediaan- stasionêre koers van die hoeveelheid verlore aanvraag, die aanvraag en herbestellings wat gedoen is word bepaal. 'n Numeriese voorbeeld illustreer die resultate.

An expert system for spare parts inventory control

International Nuclear Information System (INIS)

Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

1987-01-01

This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

U.S. Navy Ships Food Service Divisions: Modernizing Inventory Management

Science.gov (United States)

2010-06-01

management procedures for receipt, inventory, stowage, and issue of provisions onboard ships have remained relatively unchanged for decades. Culinary ...improve the quality of life for Culinary Specialists 15. NUMBER OF PAGES 87 14. SUBJECT TERMS Inventory management , records keeper, stores onload...remained relatively unchanged for decades. Culinary Specialists are utilizing an antiquated and unreliable inventory management program (the Food

Design of inventory pools in spare part support operation systems

Science.gov (United States)

Mo, Daniel Y.; Tseng, Mitchell M.; Cheung, Raymond K.

2014-06-01

The objective of a spare part support operation is to fulfill the part request order with different service contracts in the agreed response time. With this objective to achieve different service targets for multiple service contracts and the considerations of inventory investment, it is not only important to determine the inventory policy but also to design the structure of inventory pools and the order fulfilment strategies. In this research, we focused on two types of inventory pools: multiple inventory pool (MIP) and consolidated inventory pool (CIP). The idea of MIP is to maintain separated inventory pools based on the types of service contract, while CIP solely maintains a single inventory pool regardless of service contract. Our research aims to design the inventory pool analytically and propose reserve strategies to manage the order fulfilment risks in CIP. Mathematical models and simulation experiments would be applied for analysis and evaluation.

Development and Testing of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Prather, E. E.; English, T. R.; Desch, S. M.; Keller, J. M.; Collaboration of Astronomy Teaching Scholars CATS

2011-01-01

Trying to assess if our students really understand the ideas we present in class can be difficult. Concept inventories are research-validated assessment tools that can provide us with data to better understand whether we are successful in the classroom. The idea for the Solar System Concept Inventory (SSCI) was born after realizing that no concept inventory currently available covered details regarding the formation and evolution of our solar system. Topics were selected by having faculty identify the key concepts they address when teaching about the solar system and interviewing students in order to identify common naive ideas and reasoning difficulties relating to these key topics. Beginning in fall of 2008, a national multi-institutional field test began which would eventually involve nearly 2500 students and 17 instructors from 10 different institutions. After each round of testing, a group of instructors from multiple institutions around the country worked together to analyze the data and revise or eliminate underperforming questions. Each question was examined using a combination of point biserial, percent correct on the pre-test, and item difficulty to determine if the question was properly differentiating student understanding while also ensuring the question was not too easy or too hard. In this talk, I will present an overall outline of the development of the SSCI as well as the final testing results. The final version of the SSCI can be found at http://casa.colorado.edu/ hornstei/ssci/. This material is based upon work supported by the National Science Foundation under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS). Any findings expressed in this material are those of the authors and do not necessarily reflect the views of the NSF.

RIMS [Records Inventory Management System] Handbook

International Nuclear Information System (INIS)

1989-03-01

The Records Inventory Management System (RIMS) is a computer library of abstracted documents relating to low-level radioactive waste. The documents are of interest to state governments, regional compacts, and the Department of Energy, especially as they relate to the Low-Level Radioactive Waste Policy Act requiring states or compacts of states to establish and operate waste disposal facilities. RIMS documents are primarily regulatory, policy, or technical documents, published by the various states and compacts of the United States; however, RIMS contains key international publications as well. The system has two sections: a document retrieval section and a document update section. The RIMS mainframe can be accessed through a PC or modem. Also, each state and compact may request a PC version of RIMS, which allows a user to enter documents off line and then upload the documents to the mainframe data base

Computational results for the control of a divergent N-echelon inventory system

NARCIS (Netherlands)

Diks, E.B.; Kok, de A.G.

1996-01-01

Consider a divergent multi-echelon inventory system, e.g., a distribution system or a production system. At every facility in the system orders are placed (or production is initiated) periodically. The order arrives after a fixed lead time. At the end of each period linear costs are incurred at each

Pembuatan Program Aplikasi Sistem Inventori Berbasis Visual Basic Pada Sinar Baru

OpenAIRE

Dessy, Dessy; Dewayani, Ery

2016-01-01

Application system inventory program based on visual basic on Sinar Baru for helping admin to manage in or out items systematically which it doesn't save and computerized well. The programming using System Development Life Cicle (SDLC). SDLC has four phases, that are: Planning Phase, Analysis Phase, Design Phase, and Implementation Phase. Another design that used for this program are flowchart, Context diagram, data flow diagram (DFD), Entity Relation Diagram (ERD), Relational Table .Visual B...

Life-cycle assessment of photovoltaic systems: results of Swiss studies on energy chains

Energy Technology Data Exchange (ETDEWEB)

Dones, Roberto [Paul Scherrer Inst., Villigen (Switzerland); Frischknecht, Rolf [Federal Institute of Technology, Zurich (Switzerland)

1998-04-01

The methodology used and results obtained for grid-connected photovoltaic (PV) plants in recent Swiss life-cycle assessment (LCA) studies on current and future energy systems are discussed. Mono- and polycrystalline silicon cell technologies utilised in current panels as well as monocrystalline and amorphous cells for future applications were analysed from Swiss conditions. The environmental inventories of slanted-roof solar panels and large plants are presented. Greenhouse gas emissions from present and future electricity systems are compared. The high electricity requirements for manufacturing determine most of the environmental burdens associated with current photovoltaics. However, due to increasing efficiency of production processes and cells, the environmental performance of PV systems is likely to improve substantially in the future. (Author)

Life-cycle assessment of photovoltaic systems: results of Swiss studies on energy chains

International Nuclear Information System (INIS)

Dones, Roberto; Frischknecht, Rolf

1998-01-01

The methodology used and results obtained for grid-connected photovoltaic (PV) plants in recent Swiss life-cycle assessment (LCA) studies on current and future energy systems are discussed. Mono- and polycrystalline silicon cell technologies utilised in current panels as well as monocrystalline and amorphous cells for future applications were analysed from Swiss conditions. The environmental inventories of slanted-roof solar panels and large plants are presented. Greenhouse gas emissions from present and future electricity systems are compared. The high electricity requirements for manufacturing determine most of the environmental burdens associated with current photovoltaics. However, due to increasing efficiency of production processes and cells, the environmental performance of PV systems is likely to improve substantially in the future. (Author)

Rapid Inventory Collection System (RICS) and the 2009 Victorian Bushfires impact assessment

Energy Technology Data Exchange (ETDEWEB)

Habili, N; Corby, N; Cechet, R P, E-mail: nariman.habili@ga.gov.a [Risk and Impact Analysis Group, Geoscience Australia G.PO Box 378, Canberra, Australian Capital Territory (Australia)

2010-08-15

The Rapid Inventory Collection System (RICS) is a vehicular data collection system (image and GPS) used for building/infrastructure damage and inventory assessment. The system consists of Ethernet cameras attached to a tripod mounted on a motor vehicle, a GPS receiver and software written in C++. RICS was deployed following the 2009 Victorian Bushfires and the collected data was used by the Victorian Bushfires Royal Commission for the impact assessment (field survey) which quantified the extent and severity of the damage caused to residential buildings by the fire-storm. The regions of Kilmore East, Murrindindi, Churchill, Maiden Gully - Bendigo and Bunyip had nearly 5400 residential structures within the fire perimeter. Analysis utilising both aerial and vehicular (RICS) imagery indicates that just over 2100 homes were destroyed and an additional 800 received minor damage.

The order and volume fill rates in inventory control systems

DEFF Research Database (Denmark)

Thorstenson, Anders; Larsen, Christian

2011-01-01

This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total quantities the order fill rate would be the preferred service level m...

A two-commodity perishable inventory system | Sivakumar | ORiON

African Journals Online (AJOL)

We present a two-commodity perishable stochastic inventory system under continuous review at a service facility with a finite waiting room. The maximum storage capacity for the i-th item is fixed as Si (i = 1,2). We assume that a demand for the i-th commodity is of unit size. The arrival instants of customers to the service ...

Biogas from Marine Macroalgae: a New Environmental Technology — Life Cycle Inventory for a Further LCA

Science.gov (United States)

Romagnoli, Francesco; Blumberga, Dagnija; Gigli, Emanuele

2010-01-01

The main goal of this paper is to analyze the innovative process of production of biogas (via fermentation processes) using marine macroalgae as feedstock in a pilot project plant in Augusta (Sicily, Italy). Algae, during their growth, have the capacity to assimilate nutrients and thus subsequent harvesting of the algal biomass recovers the nutrients from biowaste sources giving the possibility to transform negative environmental externalities in positive mainly in terms of eutrophication and climate change impact categories. The paper presents a novel environmental technology for the production of biogas and 2nd generation biofuel (liquid biomethane) after an upgrading process through the use of a cryogenic technology. The paper would also like to make the first attempt at understanding the possibility to implement this innovative technology in the Latvian context. The first calculations and assumptions for the Life Cycle Inventory for a further Life Cycle Assessment are presented.

Automated Inventory Control System for Nigeria Power Holding ...

African Journals Online (AJOL)

The company may want to release some capital from its inventory investment by reducing stock levels. In addition, manual ways of handling inventory has failed to cope with factors like ... graphical interface ability for decision making.

How physical modelling can improve Life Cycle Inventory accuracy and allow predictive LCA: an application to the steel industry

International Nuclear Information System (INIS)

Mirgaux, O.; Ablitzer, D.; Iosif, A.M.

2009-01-01

Assessing traditional iron and steelmaking processes from an environmental point of view and developing breakthrough eco-efficient processes for the future are major challenges for the steel industry today. In the framework of the challenging European project ULCOS, which stands for Ultra Low CO 2 Steelmaking, Life Cycle Assessment (LCA) was chosen to assess breakthrough processes that could be part of the future iron and steel making landscape and to compare them to the reference classical integrated steel-mill. To carry out such a study we propose a new methodological concept which combines LCA thinking with physicochemical process modelling. Physicochemical models were developed for each processes of the classical integrated steelmaking route in order to generate the data required to draw the Life Cycle Inventory of the route. Such a method bypasses the traditional data collection and brings accuracy to the inventory by introducing rigorous mass and energy balances into the methodology. In addition it was shown that such an approach allows testing and assessing different operational practices of the processes in order to optimise the use of energy and the CO 2 emissions, which showed that it can be used as a powerful tool for eco-conception of processes. (authors)

Simplified fuel cycle tritium inventory model for systems studies -- An illustrative example with an optimized cryopump exhaust system

International Nuclear Information System (INIS)

Kuan, W.; Ho, S.K.

1995-01-01

It is desirable to incorporate safety constraints due to fuel cycle tritium inventories into tokamak reactor design optimization. An optimal scenario to minimize tritium inventories without much degradation of plasma performance can be defined for each tritium processing component. In this work, the computer code TRUFFLES is used exclusively to obtain numerical data for a simplified model to be used for systems studies. As an illustration, the cryopump plasma exhaust subsystem is examined in detail for optimization purposes. This optimization procedure will then be used to further reduce its window of operation and provide constraints on the data used for the simplified tritium inventory model

COMPUTER ASSISTED INVENTORY CONTROL SYSTEM ...

African Journals Online (AJOL)

issue in supply chain inventory manugement is to coordinate .... A supply chain is a network of organizations that are involved in the ... make decisions, which result in sub-optimization. ... same time reduce the ultimate cost of finished goods.

Preliminary Investigation on Life Cycle Inventory of Powder Bed Fusion of Stainless Steel

Science.gov (United States)

Nyamekye, Patricia; Piili, Heidi; Leino, Maija; Salminen, Antti

Manufacturing of work pieces from stainless steel with laser additive manufacturing, known also as laser sintering or 3D printing may increase energy and material efficiency. The use of powder bed fusion offers advantages to make parts for dynamic applications of light weight and near-net-shape products. Due to these advantages among others, PBF may also reduce emissions and operational cost in various applications. However, there are only few life cycle assessment studies examining this subject despite its prospect to business opportunity. The application of Life Cycle Inventory (LCI) in Powder Bed Fusion (PBF) provides a distinct evaluation of material and energy consumption. LCI offers a possibility to improve knowledge of process efficiency. This study investigates effect of process sustainability in terms of raw material, energy and time consumption with PBF and CNC machining. The results of the experimental study indicated lower energy efficiency in the production process with PBF. This study revealed that specific energy consumption in PBF decreased when several components are built simultaneously than if they would be built individually. This is due to fact that energy consumption per part is lower. On the contrary, amount of energy needed to machine on part in case of CNC machining is lower when parts are done separately.

Nuclear materials inventory plan

International Nuclear Information System (INIS)

Doerr, R.W.; Nichols, D.H.

1982-03-01

In any processing, manufacturing, or active storage facility it is impractical to assume that any physical security system can prevent the diversion of Special Nuclear Material (SNM). It is, therefore, the responsibility of any DOE Contractor, Licensee, or other holder of SNM to provide assurance that loss or diversion of a significant quantity of SNM is detectable. This ability to detect must be accomplishable within a reasonable time interval and can be accomplished only by taking physical inventories. The information gained and decisions resulting from these inventories can be no better than the SNM accounting system and the quality of measurements performed for each receipt, removal and inventory. Inventories interrupt processing or production operations, increase personnel exposures, and can add significantly to the cost of any operation. Therefore, realistic goals for the inventory must be defined and the relationship of the inherent parameters used in its validation be determined. Purpose of this document is to provide a statement of goals and a plan of action to achieve them

Analysing the effectiveness of vendor-managed inventory in a single-warehouse, multiple-retailer system

Science.gov (United States)

Rahim, Mohd Kamarul Irwan Abdul; Aghezzaf, El-Houssaine; Limère, Veronique; Raa, Birger

2016-06-01

This paper considers a two-stage supply chain, consisting of a single warehouse and multiple retailers facing deterministic demands, under a vendor-managed inventory (VMI) policy. It presents a two-phase optimisation approach for coordinating the shipments in this VMI system. The first phase uses direct shipping from the supplier to all retailers to minimise the overall inventory costs. Then, in the second phase, the retailers are clustered using a construction heuristic in order to optimise the transportation costs while satisfying some additional restrictions. The improvement of the system's performance through coordinated VMI replenishments against the system with direct shipping only is shown and discussed in the comparative analysis section.

OTUS - Reactor inventory management system based on ORIGEN2

Energy Technology Data Exchange (ETDEWEB)

Poellaenen, R; Toivonen, H; Lahtinen, J; Ilander, T

1995-10-01

ORIGEN2 is a computer code that calculates nuclide composition and other characteristics of nuclear fuel. The use of ORIGEN2 requires good knowledge in reactor physics. However, once the input has been defined for a particular reactor type, the calculations can be easily repeated for any burnup and decay time. This procedure produces large output files that are difficult to handle manually. A new computer code, known as OTUS, was designed to facilitate the postprocessing of the data. OTUS makes use of the inventory files precalculated with ORIGEN2 in a way that enables their versatile treatment for different safety analysis purposes. A data base is created containing a comprehensive set of ORIGEN2 calculations as a function of fuel burnup and decay time. OTUS is a reactor inventory management system for a microcomputer with Windows interface. Four major data operations are available: (1) Build data modifies ORIGEN2 output data into a suitable format, (2) View data enables flexible presentation of the data as such, (3) Different calculations, such as nuclide ratios and hot particle characteristics, can be performed for severe accident analyses, consequence analyses and research purposes, (4) Summary files contain both burnup dependent and decay time dependent inventory information related to the nuclide and the reactor specified. These files can be used for safeguards, radiation monitoring and safety assessment. (orig.) (22 refs., 29 figs.).

LQ optimal and reaching law-based sliding modes for inventory management systems

Science.gov (United States)

Ignaciuk, Przemysław; Bartoszewicz, Andrzej

2012-01-01

In this article, the theory of discrete sliding-mode control is used to design new supply strategies for periodic-review inventory systems. In the considered systems, the stock used to fulfil an unknown, time-varying demand can be replenished from a single supply source or from multiple suppliers procuring orders with different delays. The proposed strategies guarantee that demand is always entirely satisfied from the on-hand stock (yielding the maximum service level), and the warehouse capacity is not exceeded (which eliminates the cost of emergency storage). In contrast to the classical, stochastic approaches, in this article, we focus on optimising the inventory system dynamics. The parameters of the first control strategy are selected by minimising a quadratic cost functional. Next, it is shown how the system dynamical performance can be improved by applying the concept of a reaching law with the appropriately adjusted reaching phase. The stable, nonoscillatory behaviour of the closed-loop system is demonstrated and the properties of the designed controllers are discussed and strictly proved.

Inventory Control System for a Healthcare Apparel Service Centre with Stockout Risk: A Case Analysis.

Science.gov (United States)

Pan, An; Hui, Chi-Leung

2017-01-01

Based on the real-world inventory control problem of a capacitated healthcare apparel service centre in Hong Kong which provides tailor-made apparel-making services for the elderly and disabled people, this paper studies a partial backordered continuous review inventory control problem in which the product demand follows a Poisson process with a constant lead time. The system is controlled by an ( Q , r ) inventory policy which incorporate the stockout risk, storage capacity, and partial backlog. The healthcare apparel service centre, under the capacity constraint, aims to minimize the inventory cost and achieving a low stockout risk. To address this challenge, an optimization problem is constructed. A real case-based data analysis is conducted, and the result shows that the expected total cost on an order cycle is reduced substantially at around 20% with our proposed optimal inventory control policy. An extensive sensitivity analysis is conducted to generate additional insights.

A retrial queueing-inventory system with J-additional options for ...

African Journals Online (AJOL)

A continuous review (s; S) inventory system at a service facility with nite homogeneous sources of demands and retrial is analysed. The lifetime of each item is assumed to be exponential. Before items are delivered to the customers, some basic service on the item must be performed. It is known as a regular or main service.

Vault Safety and Inventory System users manual, PRIME 2350. Revision 1

International Nuclear Information System (INIS)

Downey, N.J.

1994-01-01

This revision is issued to request review of the attached document: VSIS User Manual, PRIME 2350, which provides user information for the operation of the VSIS (Vault Safety and Inventory System). It describes operational aspects of Prime 2350 minicomputer and vault data acquisition equipment. It also describes the User's Main Menu and menu functions, including REPORTS. Also, system procedures for the Prime 2350 minicomputer are covered

Vault Safety and Inventory System users manual, PRIME 2350. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Downey, N.J.

1994-12-14

This revision is issued to request review of the attached document: VSIS User Manual, PRIME 2350, which provides user information for the operation of the VSIS (Vault Safety and Inventory System). It describes operational aspects of Prime 2350 minicomputer and vault data acquisition equipment. It also describes the User`s Main Menu and menu functions, including REPORTS. Also, system procedures for the Prime 2350 minicomputer are covered.

Robust Inventory System Optimization Based on Simulation and Multiple Criteria Decision Making

Directory of Open Access Journals (Sweden)

Ahmad Mortazavi

2014-01-01

Full Text Available Inventory management in retailers is difficult and complex decision making process which is related to the conflict criteria, also existence of cyclic changes and trend in demand is inevitable in many industries. In this paper, simulation modeling is considered as efficient tool for modeling of retailer multiproduct inventory system. For simulation model optimization, a novel multicriteria and robust surrogate model is designed based on multiple attribute decision making (MADM method, design of experiments (DOE, and principal component analysis (PCA. This approach as a main contribution of this paper, provides a framework for robust multiple criteria decision making under uncertainty.

An Integrated Inventory-Transportation System with Periodic Pick-Ups and Leveled Replenishment

Directory of Open Access Journals (Sweden)

Thomas Volling

2013-11-01

Full Text Available In this paper we develop a combined inventory-transportation system. The general idea is to integrate a simple replenishment policy with a routing component to derive operationally consistent standard routes as a basis for milk run design. The most interesting feature of the approach is that we combine stochastic vehicle routing with a replenishment policy which makes use of inventory to level the variability propagated into transportation operations. To evaluate the approach, we compare its performance with stochastic vehicle routing as well as sequential vehicle routing and replenishment planning. With respect to these approaches, substantial gains are achieved.

48 CFR 245.608 - Screening of contractor inventory.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Screening of contractor inventory. 245.608 Section 245.608 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... Disposal of Contractor Inventory 245.608 Screening of contractor inventory. ...

Inventory control in multi-echelon divergent systems with random lead times

NARCIS (Netherlands)

Heijden, van der M.C.; Diks, E.B.; Kok, de A.G.

1996-01-01

This paper deals with integral inventory control in multi-echelon divergent systems with stochastic lead times. The policy considered is an echelon stock, periodic review, order-up-to (R, S) policy. A computational method is derived to obtain the order-up-to level and the allocation fractions

Inventory control in multi-echelon divergent systems with random lead times

NARCIS (Netherlands)

van der Heijden, Matthijs C.; Diks, Erik; de Kok, Ton

1999-01-01

This paper deals with integral inventory control in multi-echelon divergent systems with stochastic lead times. The policy considered is an echelon stock, periodic review, order-up-to (R, S) policy. A computational method is derived to obtain the order-up-to level and the allocation fractions

48 CFR 49.602-2 - Inventory forms.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Inventory forms. 49.602-2... TERMINATION OF CONTRACTS Contract Termination Forms and Formats 49.602-2 Inventory forms. Standard Form (SF) 1428, Inventory Disposal Schedule, and SF 1429, Inventory Disposal Schedule—Continuation Sheet, shall...

Inventory Control System for a Healthcare Apparel Service Centre with Stockout Risk: A Case Analysis

Directory of Open Access Journals (Sweden)

An Pan

2017-01-01

Full Text Available Based on the real-world inventory control problem of a capacitated healthcare apparel service centre in Hong Kong which provides tailor-made apparel-making services for the elderly and disabled people, this paper studies a partial backordered continuous review inventory control problem in which the product demand follows a Poisson process with a constant lead time. The system is controlled by an (Q,r inventory policy which incorporate the stockout risk, storage capacity, and partial backlog. The healthcare apparel service centre, under the capacity constraint, aims to minimize the inventory cost and achieving a low stockout risk. To address this challenge, an optimization problem is constructed. A real case-based data analysis is conducted, and the result shows that the expected total cost on an order cycle is reduced substantially at around 20% with our proposed optimal inventory control policy. An extensive sensitivity analysis is conducted to generate additional insights.

Computerized information system for inventory-taking and verification at a nuclear fuel fabrication plant with closed production lines

International Nuclear Information System (INIS)

Bahm, W.; Brueckner, C.; Hartmann, G.

1976-01-01

By means of a model the use of electronic data processing is studied for preparing inventory listings and for inventory verification in a fabrication plant for Pu-U mixed-oxide fuel pins. It is postulated that interruptions in operation should be avoided as much as possible. Closed-Line production is assumed so that access to nuclear material calls for special withdrawal via locks. The production line is subdivided into sections with measuring points placed in between to record the nuclear material flow. The measured results are fed to a central data acquisition and reporting system capable of calculating on-line from these results the book inventories present in the individual sections. Inventory-taking and verification are carried out simultaneously in the sections of the production line using the EDP system. The production is not interrupted for this purpose. The production stream is tagged prior to reaching a section to be measured and is subsequently measured when entering the respective section until the tag has reached the end of the section. The measurement can be verified by inspectors. Movements of nuclear materials in and from other plant areas such as the storage area are likewise fed into the central data processing system so that inventory lists can be recalled at any moment. By this means the inventory can be taken quickly and at any time. The inventory is verified in the conventional way. (author)

Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module L, Life-cycle inventory of hardwood lumber manufacturing in the Southeastern United States.

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

The goal of this study was to gain an understanding of the environmental impact of hardwood lumber production through a gate-to-gate life-cycle inventory (LCI) of hardwood sawmills in the Southeastern United States (SE). Primary mill data were collected per Consortium on Research for Renewable Industrial Materials (CORRIM) Research Guidelines. Life-cycle impact...

A Continuous Automated Vault Inventory System (CAVIS) for accountability monitoring of stored nuclear materials

International Nuclear Information System (INIS)

Pickett, C.A.; Barham, M.A.; Gafford, T.A.; Hutchinson, D.P.; Jordan, J.K.; Maxey, L.C.; Moran, B.W.; Muhs, J.; Nodine, R.; Simpson, M.L.

1994-01-01

Nearly all facilities that store hazardous (radioactive or non-radioactive) materials must comply with prevailing federal, state, and local laws. These laws usually have components that require periodic physical inspections to insure that all materials remain safely and securely stored. The inspections are generally labor intensive, slow, put personnel at risk, and only find anomalies after they have occurred. The system described in this paper was developed for monitoring stored nuclear materials resulting from weapons dismantlement, but its applications extend to any storage facility that meets the above criteria. The traditional special nuclear material (SNM) accountability programs, that are currently used within most of the Department of Energy (DOE) complex, require the physical entry of highly trained personnel into SNM storage vaults. This imposes the need for additional security measures, which typically mandate that extra security personnel be present while SNM inventories are performed. These requirements increase labor costs and put additional personnel at risk to radiation exposure. In some cases, individuals have received radiation exposure equivalent to the annual maximum during just one inventory verification. With increasing overhead costs, the current system is rapidly becoming too expensive to operate, the need for an automated method of inventory verification is evident. The Continuous Automated Vault Inventory System (CAVIS) described in this paper was designed and prototyped as a low cost, highly reliable, and user friendly system that is capable of providing, real-time weight, gamma. and neutron energy confirmation from each item stored in a SNM vault. This paper describes the sensor technologies, the CAVIS prototype system (built at Y- 12 for highly enriched uranium storage), the technical requirements that must be achieved to assure successful implementation, and descriptions of sensor technologies needed for a plutonium facility

A Continuous Automated Vault Inventory System (CAVIS) for accountability monitoring of stored nuclear materials

Energy Technology Data Exchange (ETDEWEB)

Pickett, C.A.; Barham, M.A.; Gafford, T.A.; Hutchinson, D.P.; Jordan, J.K.; Maxey, L.C.; Moran, B.W.; Muhs, J.; Nodine, R.; Simpson, M.L. [and others

1994-12-08

Nearly all facilities that store hazardous (radioactive or non-radioactive) materials must comply with prevailing federal, state, and local laws. These laws usually have components that require periodic physical inspections to insure that all materials remain safely and securely stored. The inspections are generally labor intensive, slow, put personnel at risk, and only find anomalies after they have occurred. The system described in this paper was developed for monitoring stored nuclear materials resulting from weapons dismantlement, but its applications extend to any storage facility that meets the above criteria. The traditional special nuclear material (SNM) accountability programs, that are currently used within most of the Department of Energy (DOE) complex, require the physical entry of highly trained personnel into SNM storage vaults. This imposes the need for additional security measures, which typically mandate that extra security personnel be present while SNM inventories are performed. These requirements increase labor costs and put additional personnel at risk to radiation exposure. In some cases, individuals have received radiation exposure equivalent to the annual maximum during just one inventory verification. With increasing overhead costs, the current system is rapidly becoming too expensive to operate, the need for an automated method of inventory verification is evident. The Continuous Automated Vault Inventory System (CAVIS) described in this paper was designed and prototyped as a low cost, highly reliable, and user friendly system that is capable of providing, real-time weight, gamma. and neutron energy confirmation from each item stored in a SNM vault. This paper describes the sensor technologies, the CAVIS prototype system (built at Y- 12 for highly enriched uranium storage), the technical requirements that must be achieved to assure successful implementation, and descriptions of sensor technologies needed for a plutonium facility.

Genetic algorithm to optimize two-echelon inventory control system for perishable goods in terms of active packaging

Directory of Open Access Journals (Sweden)

Babak Yousefi Yegane

2012-01-01

Full Text Available This paper considers an inventory control policy for a two-echelon inventory control system with one supplier-one buyer. We consider the case of deteriorating items which lead to shortage in supply chain. Therefore, it is necessary to decrease the deterioration rate by adding some specification to the packaging of these items that is known as active packaging. Although this packaging can reduce the deteriorating rate of products, but may be increases the cost of both supplier and buyer. Because of the complexity of the mathematical model, a genetic algorithm has been developed to determine the best policy of this inventory control system.

An Adaptive Multi-Purpose Inventory Management System for Military Aircraft Maintenance: A Case Study of Royal Jordanian Air Force (RJAF)

Science.gov (United States)

Al-Khawaldeh, Ihsan Naji

Inventory management is a vital tool for any organization to survive the competency and reduce the operating cost. In the field of aviation its importance is more provident as the spares are more on the move. Apart from the aspects related to inventory management like quantity, quality, price, lead time...etc., inventory in aviation caters for those items, where to store them and how and when to circulate them. On other hand, safety which is a prominent crucial factor in aviation field makes it more and more demanding to have an inventory management as an integral part of both aviation maintenance management and quality assurance program. Just-in Time (JIT) inventory management systems that worked well in reducing the waste and increasing the profit might not work well in aviation field both civil and military. Hence, a need for an adaptive management system that takes care of cost reduction along with high readiness is of a vital need. The Inventory Management System (IMS) in aviation and especially in military is seen to follow a mix of the different inventory management methods. In other word, it is a combination of Fixed-Order Quantity (Q-Model), and Fixed-Time Period Reordering (P-model) to cope with the dynamics of aviation maintenance needs. The uniqueness feature of aviation inventory, where a shortage of trivial spares like nuts, bolts may at some point be considered as critical, grounding a complete fleet especially one that matters a flight safety issue. Different Platforms, operating locations, aging and many others influence the need for an adaptive inventory system. Using Access software for a simple programming and using it as inventory management system that will help in defining the rate of usage of spares, and consumables, and on the other hand may give an insight in material deficiency, that will lead for engineering design improvement and modification. The main aim of this (IMS) is reduction of both A.O.G chances, and inventory cost related to

Real-time analysis and display of reactor system mass inventory

International Nuclear Information System (INIS)

Dao, L.T.; Meachum, T.R.

1982-01-01

A mass inventory system (MIS) to evaluate, in real-time, the coolant distribution within the primary coolant system of the Loss-of-Fluid Test (LOFT) reactor has been developed. The computer-based system calculates and displays the coolant levels by two methods: using level measurements and performing a mass balance. The MIS is designed to provide up-to-date, intelligible information on the coolant distribution during any LOFT experiment. During LOFT experiments in which the primary coolant pumps are on, the method also provides void fraction information and the anticipated liquid level in the reactor vessel should the pumps be turned off

PERSONALITY TRAITS, ANGER AND PSYCHIATRIC SYMPTOMS RELATED TO QUALITY OF LIFE IN PATIENTS WITH NEWLY DIAGNOSED DIGESTIVE SYSTEM CANCER

Directory of Open Access Journals (Sweden)

Noemi Peres HONORATO

2017-03-01

Full Text Available ABSTRACT BACKGROUND The presence of psychiatric symptoms, anger, and personality characteristics are factors that affect the quality of life of newly diagnosed digestive system cancer patients. OBJECTIVE This study aims to identify which stable characteristics of the individual’s personality interfere with quality of life, even when reactive emotional characteristics of falling ill are controlled. METHODS A cross-sectional study was performed at the Oncology Clinic ( Hospital das Clínicas , Marília/SP, Brazil, in which 50 adult patients with digestive system cancer and diagnosed less than 6 months answered the State-Trait Anger Expression Inventory, Temperament and Character Inventory, Hospital Anxiety and Depression Scale and WHOQOL-BREF. Multiple regression was performed to verify if quality of life was related to stable characteristics of the subject’s personality (anger trait, temperament and character after controlling to the transient emotional aspects (anger state, psychiatric symptoms. RESULTS The quality of life psychological health score was higher in presence of self-directedness character and reward dependence temperament and quality of life environment score was higher in presence of self-directedness character and lower in presence of harm avoidance temperament. CONCLUSION The psychological well-being and the adaptive needs to the environment that favoring a better quality of life were reinforced mainly by the self-directedness character; which means that patients more autonomous cope better with the disease. On the other hand, the harm avoidance temperament (meaning the patient has fear of aversive situations impaired the adaptive capacity to deal with the changes of the day-to-day imposed by the disease. Understanding these personality traits is important to the health professionals drive the patient to more successful treatment.

Analysis of a production/inventory system with multiple retailers

OpenAIRE

Noblesse, Ann; Boute, Robert; Lambrecht, Marc; Van Houdt, B.

2014-01-01

We study a production/inventory system with one manufacturing plant and multiple retailers. Production lead times at the plant are stochastic and endogenously determined by the orders placed by the different retailers. Assuming stochastic (phase-type distributed) production and setup times, we make use of matrix analytic techniques to develop a queuing model that is capable to compute the distribution of the time orders spend in the production facility, depending on the retailer’s lot s...

RFSYS: an inventory code for RF system parameters

International Nuclear Information System (INIS)

Treadwell, E.A.

1983-03-01

RFSYS is a program which maintains an inventory of rf system parameters associated with the 200 MeV Linear Accelerator at Fermi National Accelerator Laboratory. The program, written by Elliott Treadwell, of the Linac group, offers five modes of operation: (1) Allocates memory space for additional rf systems (data arrays). (2) Prints a total or partial list of old tube parameters on an ADM-3 terminal. (3) Changes tube data stored in the master array. If the number of systems increases, this mode permits the user to enter new data. (4) Computes the average time of operation for a given tube and system. (5) Stops program execution. There is an exit option, (a) create one output data file or (b) create three output files, one of which contains column headers and coded comments. All output files are stored on the CYBER-175 disc, and eventually on high density (6250 B.P.I.) magnetic tapes. This arrangement eliminates the necessity for online data buffers

The development of a national surveillance system for monitoring blood use and inventory levels at sentinel hospitals in South Korea.

Science.gov (United States)

Lim, Y A; Kim, H H; Joung, U S; Kim, C Y; Shin, Y H; Lee, S W; Kim, H J

2010-04-01

We developed a web-based program for a national surveillance system to determine baseline data regarding the supply and demand of blood products at sentinel hospitals in South Korea. Sentinel hospitals were invited to participate in a 1-month pilot-test. The data for receipts and exports of blood from each hospital information system were converted into comma-separated value files according to a specific conversion rule. The daily data from the sites could be transferred to the web-based program server using a semi-automated submission procedure: pressing a key allowed the program to automatically compute the blood inventory level as well as other indices including the minimal inventory ratio (MIR), ideal inventory ratio (IIR), supply index (SI) and utilisation index (UI). The national surveillance system was referred to as the Korean Blood Inventory Monitoring System (KBIMS) and the web-based program for KBIMS was referred to as the Blood Inventory Monitoring System (BMS). A total of 30 256 red blood cell (RBC) units were submitted as receipt data, however, only 83% of the receipt data were submitted to the BMS server as export data (25 093 RBC units). Median values were 2.67 for MIR, 1.08 for IIR, 1.00 for SI, 0.88 for UI and 5.33 for the ideal inventory day. The BMS program was easy to use and is expected to provide a useful tool for monitoring hospital inventory levels. This information will provide baseline data regarding the supply and demand of blood products in South Korea.

Inventory Management and Its Effects on Customer Satisfaction

Directory of Open Access Journals (Sweden)

Mehfooz Ali

2012-07-01

Full Text Available This study examines how inventory management puts positive impact on customer satisfaction and how easily we can check the performance. It also helps retailers to put their inventories in proper order which tells them about demand and supply of their inventories. Proper inventory management system reduces the risk of short of inventories which reduce the cost of lost customers. The objective of the study is to minimize the risk of dissatisfaction of customers and found how to sustain customer satisfaction with the help of proper inventories system. This paper also outlines significant relationship between Customer needs, Quality with variable of prime interest. Poor association has been found between performance and customer satisfaction.

Reduction of worldwide plutonium inventories using conventional reactors and advanced fuels: A systems study

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Chodak, P. III

1997-01-01

The potential for reducing plutonium inventories in the civilian nuclear fuel cycle through recycle in LWRs of a variety of mixed-oxide forms is examined by means of a cost-based plutonium-flow systems model that includes an approximate measure of proliferation risk. The impact of plutonium recycle in a number of forms is examined, including the introduction of nonfertile fuels into conventional (LWR) reactors to reduce net plutonium generation, to increase plutonium burnup, and to reduce exo-reactor plutonium inventories

U.S. Natural Gas System Methane Emissions: State of Knowledge from LCAs, Inventories, and Atmospheric Measurements (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Heath, G.

2014-04-01

Natural gas (NG) is a potential "bridge fuel" during transition to a decarbonized energy system: It emits less carbon dioxide during combustion than other fossil fuels and can be used in many industries. However, because of the high global warming potential of methane (CH4, the major component of NG), climate benefits from NG use depend on system leakage rates. Some recent estimates of leakage have challenged the benefits of switching from coal to NG, a large near-term greenhouse gas (GHG) reduction opportunity. During this presentation, Garvin will review evidence from multiple perspectives - life cycle assessments (LCAs), inventories and measurements - about NG leakage in the US. Particular attention will be paid to a recent article in Science magazine which reviewed over 20 years of published measurements to better understand what we know about total methane emissions and those from the oil and gas sectors. Scientific and policy implications of the state of knowledge will be discussed.

48 CFR 2907.300 - Availability of inventory.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Availability of inventory... PLANNING ACQUISITION PLANNING Contractor Versus Government Performance 2907.300 Availability of inventory. The Department of Labor's FAIR Act inventory of commercial activities performed by federal employees...

A Life-cycle Approach to Improve the Sustainability of Rural Water Systems in Resource-Limited Countries

Directory of Open Access Journals (Sweden)

Nicholas Stacey

2012-11-01

Full Text Available A WHO and UNICEF joint report states that in 2008, 884 million people lacked access to potable drinking water. A life-cycle approach to develop potable water systems may improve the sustainability for such systems, however, a review of the literature shows that such an approach has primarily been used for urban systems located in resourced countries. Although urbanization is increasing globally, over 40 percent of the world’s population is currently rural with many considered poor. In this paper, we present a first step towards using life-cycle assessment to develop sustainable rural water systems in resource-limited countries while pointing out the needs. For example, while there are few differences in costs and environmental impacts for many improved rural water system options, a system that uses groundwater with community standpipes is substantially lower in cost that other alternatives with a somewhat lower environmental inventory. However, a LCA approach shows that from institutional as well as community and managerial perspectives, sustainability includes many other factors besides cost and environment that are a function of the interdependent decision process used across the life cycle of a water system by aid organizations, water user committees, and household users. These factors often present the biggest challenge to designing sustainable rural water systems for resource-limited countries.

48 CFR 645.608 - Screening of contractor inventory.

Science.gov (United States)

2010-10-01

... inventory. 645.608 Section 645.608 Federal Acquisition Regulations System DEPARTMENT OF STATE CONTRACT MANAGEMENT GOVERNMENT PROPERTY Reporting, Redistribution, and Disposal of Contractor Inventory 645.608 Screening of contractor inventory. ...

A computerized system for control and management of radionuclide inventory: application in nuclear medicine

International Nuclear Information System (INIS)

Hoory, S.; Levy, I.M.; Moskowitz, G.; Bandyopadhyay, D.; Vaugeois, J.C.

1982-01-01

An interactive computerized system for radioisotope management and instantaneous inventory is reported. The system is capable of handling operations such as filing, nuclear imaging and disposing of various radionuclides. All radiopharmaceutical transactions are achieved with the aid of a Prime 300 mini-computer of 192K words of high speed semi-conductor memory and over 120 mega bytes of disk storage. The system automatically corrects for the appropriate decay, monitors and updates the storage file after every subsequent study. The performed study is recorded in a special file, together with the time and data retrieved from the computer's real time clock at the time of the entry. The system provides an organized and complete bookkeeping of all records concerning radionuclide transactions. It is found to be simple, efficient, highly versatile, and drastically reduces the time of operation and errors in handling the radioisotope inventory. (author)

On the relation between cost and service models for general inventory systems

NARCIS (Netherlands)

Houtum, van G.J.J.A.N.; Zijm, W.H.M.

2000-01-01

In this paper, we present a systematic overview of possible relations between cost and service models for fairly general single- and multi-stage inventory systems. In particular, we relate various types of penalty costs in pure cost models to equivalent types of service measures in service models.

A Comparison Of Joint Ordering Rule And Other Inventory Order Systems

OpenAIRE

ÖZGEN, Hüseyin

2013-01-01

The typical manuracturing corporation has about fourty or fifty percent of its total assets invested in inventory items Because of this reason inventory control is considered to be one of the most important problems that deserves a special attention of top management There are several diferent inventory control techniques that can be used in inventory management The joint ordering rule discused here is some of the most powerful techniques This paper presents a comparison of joint order...

Life time of an SPM electrolyser in a water detritiation system

International Nuclear Information System (INIS)

Cristescu, Ion

2006-01-01

The Combined Electrolysis Catalytic Exchange (CECE) method in combination with Cryogenic Distillation (CD) was chosen for tritium recovery from tritiated water which will be produced during ITER operation. One of the key components with impact to both the tritium inventory and safety is the electrolyser. The solid polymer electrolyser type is proposed but the main concern is the life time in tritium environment. On overview of main activities devoted to the life time of a SPM and carried out at Mound facility-US, TPL JAERI and TL Karlsruhe are presented in this paper. (author)

Genetic Inventory Task Final Report. Volume 2

Science.gov (United States)

Venkateswaran, Kasthuri; LaDuc, Myron T.; Vaishampayan, Parag

2012-01-01

Contaminant terrestrial microbiota could profoundly impact the scientific integrity of extraterrestrial life-detection experiments. It is therefore important to know what organisms persist on spacecraft surfaces so that their presence can be eliminated or discriminated from authentic extraterrestrial biosignatures. Although there is a growing understanding of the biodiversity associated with spacecraft and cleanroom surfaces, it remains challenging to assess the risk of these microbes confounding life-detection or sample-return experiments. A key challenge is to provide a comprehensive inventory of microbes present on spacecraft surfaces. To assess the phylogenetic breadth of microorganisms on spacecraft and associated surfaces, the Genetic Inventory team used three technologies: conventional cloning techniques, PhyloChip DNA microarrays, and 454 tag-encoded pyrosequencing, together with a methodology to systematically collect, process, and archive nucleic acids. These three analysis methods yielded considerably different results: Traditional approaches provided the least comprehensive assessment of microbial diversity, while PhyloChip and pyrosequencing illuminated more diverse microbial populations. The overall results stress the importance of selecting sample collection and processing approaches based on the desired target and required level of detection. The DNA archive generated in this study can be made available to future researchers as genetic-inventory-oriented technologies further mature.

The estimation and prediction of the inventories for the liquid and gaseous radwaste systems using the linear regression analysis

International Nuclear Information System (INIS)

Kim, J. Y.; Shin, C. H.; Kim, J. K.; Lee, J. K.; Park, Y. J.

2003-01-01

The variation transitions of the inventories for the liquid radwaste system and the radioactive gas have being released in containment, and their predictive values according to the operation histories of Yonggwang(YGN) 3 and 4 were analyzed by linear regression analysis methodology. The results show that the variation transitions of the inventories for those systems are linearly increasing according to the operation histories but the inventories released to the environment are considerably lower than the recommended values based on the FSAR suggestions. It is considered that some conservation were presented in the estimation methodology in preparing stage of FSAR

A novel approach for inventory problem in the pharmaceutical supply chain.

Science.gov (United States)

Candan, Gökçe; Yazgan, Harun Reşit

2016-02-24

In pharmaceutical enterprises, keeping up with global market conditions is possible with properly selected supply chain management policies. Generally; demand-driven classical supply chain model is used in the pharmaceutical industry. In this study, a new mathematical model is developed to solve an inventory problem in the pharmaceutical supply chain. Unlike the studies in literature, the "shelf life and product transition times" constraints are considered, simultaneously, first time in the pharmaceutical production inventory problem. The problem is formulated as a mixed-integer linear programming (MILP) model with a hybrid time representation. The objective is to maximize total net profit. Effectiveness of the proposed model is illustrated considering a classical and a vendor managed inventory (VMI) supply chain on an experimental study. To show the effectiveness of the model, an experimental study is performed; which contains 2 different supply chain policy (Classical and VMI), 24 and 30 months planning horizon, 10 and 15 different cephalosporin products. Finally the mathematical model is compared to another model in literature and the results show that proposed model is superior. This study suggest a novel approach for solving pharmaceutical inventory problem. The developed model is maximizing total net profit while determining optimal production plan under shelf life and product transition constraints in the pharmaceutical industry. And we believe that the proposed model is much more closed to real life unlike the other studies in literature.

Waste inventory record keeping systems (WIRKS) for the management and disposal of radioactive waste

International Nuclear Information System (INIS)

2001-06-01

This report is intended to serve Member States planning to develop or implement radioactive waste disposal programmes and to discuss possible ways for compiling and managing information about the inventories in their radioactive waste repositories, which includes low and intermediate level waste (short lived and long lived) and high level radioactive waste. This report identifies generic information that may be recorded in a Waste Inventory Record Keeping System (WIRKS), as identified by consultants and based on their collective expertise in radioactive waste management. The report provides examples of WIRKS implementation in some countries

Double shell tanks plutonium inventory assessment

International Nuclear Information System (INIS)

Tusler, L.A.

1995-01-01

This report provides an evaluation that establishes plutonium inventory estimates for all DSTs based on known tank history information, the DST plutonium inventory tracking system, tank characterization measurements, tank transfer records, and estimated average concentration values for the various types of waste. These estimates use data through December 31, 1994, and give plutonium estimates as of January 1, 1995. The plutonium inventory values for the DSTs are given in Section 31. The plutonium inventory estimate is 224 kg for the DSTs and 854 kg for the SSTs for a total of 1078 kg. This value compares favorably with the total plutonium inventory value of 981 kg obtained from the total plutonium production minus plutonium recovery analysis estimates

Heat transport inventory monitoring for CANDU-PHW reactors

International Nuclear Information System (INIS)

Hussein, E.; Luxat, J.C.

1984-01-01

A computer-based D 2 O coolant inventory monitoring system proposed for implementation on the digital computer controllers at Ontario Hydro's CANDU generating units is discussed. By monitoring process parameters and utilizing probabilistically-based decision algorithms, timely indication of any significant loss of D 2 O inventory will be provided to the operator. The monitoring is performed in a co-ordinated manner such that D 2 O losses from either the heat transport system or the inventory control system can be detected. (orig.)

Control system and nuclear materials inventory at IPEN/CNEN-SP, Brazil

International Nuclear Information System (INIS)

Araujo, Jose Adroaldo de; Enokihara, Cyro Teiti

2002-01-01

The history, requirements, organization, and operation of the State System of Accounting and Control from the Institute for Energetic and Nuclear Research (IPEN-CNEN/SP) are described. The implementation system at the institution take into consideration the national and international safeguards requirements. It has started by the nuclear material (U, Pu and Th) physical inventory taking, including their provenance and transformation. The earlier computerized accounting system used for control has been replaced by a new one developed by the National Authority (CNEN/CSG). The optimized system has more flexibility, giving a more effective answer to any occurred change on Material Balance Area. The present system make use of an effective methodology. (author)

Reliability and validity of the body image quality of life inventory: version for Brazilian burn victims.

Science.gov (United States)

Assunção, Flávia Fernanda Oliveira; Dantas, Rosana Aparecida Spadoti; Ciol, Márcia Aparecida; Gonçalves, Natália; Farina, Jayme Adriano; Rossi, Lidia Aparecida

2013-06-01

The aims of this study were to adapt the Body Image Quality of Life Inventory (BIQLI) into Brazilian Portuguese (BP) and to assess the psychometric properties of the adapted version. Construct validity was assessed by correlating the BIQLI-BP scores with the Rosenberg's Self-Esteem Scale, with Burns Specific Health Scale-Revised (BSHS-R), and with gender, total body surface area burned, and visibility of the scars. Participants were 77 adult burn patients. Cronbach's alpha for the adapted version was .90 and moderate linear correlations were found between body image and self-esteem and between BIQLI-BP scores and two domains of the BSHS-R: affect and body image and interpersonal relationships. The BIQLI-BP showed acceptable levels of reliability and validity for Brazilian burn patients. Copyright © 2013 Wiley Periodicals, Inc.

Data Driven Tuning of Inventory Controllers

DEFF Research Database (Denmark)

Huusom, Jakob Kjøbsted; Santacoloma, Paloma Andrade; Poulsen, Niels Kjølstad

2007-01-01

A systematic method for criterion based tuning of inventory controllers based on data-driven iterative feedback tuning is presented. This tuning method circumvent problems with modeling bias. The process model used for the design of the inventory control is utilized in the tuning...... as an approximation to reduce time required on experiments. The method is illustrated in an application with a multivariable inventory control implementation on a four tank system....

Integrating forest inventory and analysis data into a LIDAR-based carbon monitoring system

Science.gov (United States)

Kristofer D. Johnson; Richard Birdsey; Andrew O Finley; Anu Swantaran; Ralph Dubayah; Craig Wayson; Rachel. Riemann

2014-01-01

Forest Inventory and Analysis (FIA) data may be a valuable component of a LIDAR-based carbon monitoring system, but integration of the two observation systems is not without challenges. To explore integration methods, two wall-to-wall LIDAR-derived biomass maps were compared to FIA data at both the plot and county levels in Anne Arundel and Howard Counties in Maryland...

Life cycle inventory for the production of germinated oil palm seeds at a selected seed production unit in Malaysia

Science.gov (United States)

Khairuddin, Nik Sasha Khatrina; Ismail, B. S.; Muhamad, Halimah; May, Choo Yuen

2013-11-01

The increasing global demand for edible oil has encouraged Malaysia to increase the areas under oil palm cultivation. The total demand for germinated oil palm seeds in the years 2009, 2010, 2011 and 2012 were 86.4, 76.5, 72.6 and 75.2 million, respectively. Production of germinated oil palm seeds is the first link in the palm oil supply chain. Therefore, good management practices at seed production stage is required to ensure only high quality germinated oil palm seeds are produced before sale to customers. Life cycle assessment (LCA) has been used as a tool to assess environmental impact of the processes throughout a product's lifespan and this approach is an important tool for assessing green house gas (GHG) emission. For this study, a gate-to-gate life cycle inventory (LCI) of a single germinated oil palm seed production unit was carried out. The functional unit used for this LCI was one germinated oil palm seed. To determine the environmental impact for the production of germinated oil palm seeds, information on the inputs were obtained. The inputs for the production of germinated oil palm seeds involved materials such as polyethylene bags, electricity, water, chemicals and fungicides. For this study, the system boundary involved seed germination process and management of germinated oil palm seeds. It was found that the amount of input such as materials and energy used in the production of germinated oil palm seeds was very minimal.

A cyber-enabled spatial decision support system to inventory Mangroves in Mozambique: coupling scientific workflows and cloud computing

Science.gov (United States)

Wenwu Tang; Wenpeng Feng; Meijuan Jia; Jiyang Shi; Huifang Zuo; Christina E. Stringer; Carl C. Trettin

2017-01-01

Mangroves are an important terrestrial carbon reservoir with numerous ecosystem services. Yet, it is difficult to inventory mangroves because of their low accessibility. A sampling approach that produces accurate assessment while maximizing logistical integrity of inventory operation is often required. Spatial decision support systems (SDSSs) provide support for...

Life-cycle assessments in the South African water sector: A review ...

African Journals Online (AJOL)

Therefore, in South Africa it is important to promote the use of LCAs for the water sector in order to improve efficiency of processes and systems, but also to promote life-cycle based water footprinting and to include differentiated water consumption data into life-cycle inventories to make more efficient use of water as a ...

The application methods of ABC/XYZ-analysis for the inventory management purposes within the ERP-system

Directory of Open Access Journals (Sweden)

O. V. Zhukov

2017-01-01

Full Text Available Inventory management for a trading company is a vital task, which requires processing significant amounts of information. Through the application of ABC/XYZ-analysis of the nomenclature within the enterprise ERP-system, it is possible to increase significantly the efficiency of inventory management, in accordance with Pareto principle concentrating on managing the most important categories of goods. Various researchers dealt with the methods of ABC/XYZ-analysis itself but its usage as a part of the inventory management and procurement subsystem has a number of essential features, ignoring of which can lead to tangible negative consequences. The article discusses the methods and key problems of application of ABC/XYZ-analysis within the enterprise management accounting information system. For each of the factors that can affect the reliability of sales and procurement statistics and distort the results of the classification of goods, we have formulated the proposals to minimize the negative impact of that specific factor. Proposed methods allow reducing the impact of the following factors: availability of conditions for duplicate nomenclature to appear within the enterprise accounting software, the lack of a unified approach to the formation of names for newly created items of nomenclature, frequent changes in the products range of the suppliers, excessive detailing of information about a product in its name. The results of successfully implemented analysis and classification of goods can be used for a wide range of tasks varying from implementing effective inventory control to general planning and forecasting commodity flows as a part of the enterprise budgeting model. Solving these problems will harmoniously fit the inventory management in the managerial accounting system making it an effective tool in achieving strategic business goals.

Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module C, Life-cycle inventory of hardwood lumber manufacturing in the Northeast and North Central United States.

Science.gov (United States)

Richard Bergman; Scott A. Bowe

2008-01-01

The goal of this study was to find the environmental impact of hardwood lumber production through a gate-to-gate Life-Cycle Inventory (LCI) on hardwood sawmills in the northeast and northcentral (NE/NC) United States. Primary mill data was collected per CORRIM Research Guidelines (CORRIM 2001). Life-cycle analysis is beyond the scope of the study.

Contact dose rates and relevant radioactive inventory in ITER TBM systems

International Nuclear Information System (INIS)

Zucchetti, M.; Guerrini, L.; Poitevin, Y.; Ricapito, I.; Zmitko, M.

2011-01-01

The determination of the radioactive inventory and of the contact dose rates in the different ITER Test Blanket Modules systems is carried out, both for Helium-Cooled Lithium-Lead (HCLL) concept and the Helium-Cooled Pebble-Bed (HCPB) concept. The evaluations have been carried out by means of the MICROSHIELD code, starting from the data on the neutron-induced radioactivity in the blanket materials, already available for both the blanket modules. The possible sources of radioactive material in all the systems have been individuated and their contributes estimated.

Contact dose rates and relevant radioactive inventory in ITER TBM systems

Energy Technology Data Exchange (ETDEWEB)

Zucchetti, M., E-mail: massimo.zucchetti@polito.it [EURATOM/ENEA Fusion Association Politecnico di Torino, Torino (Italy); Guerrini, L., E-mail: Laurent.Guerrini@f4e.europa.eu [Fusion for Energy, ITER Department, Test Blanket Modules Group, Barcelona (Spain); Poitevin, Y.; Ricapito, I.; Zmitko, M. [Fusion for Energy, ITER Department, Test Blanket Modules Group, Barcelona (Spain)

2011-10-15

The determination of the radioactive inventory and of the contact dose rates in the different ITER Test Blanket Modules systems is carried out, both for Helium-Cooled Lithium-Lead (HCLL) concept and the Helium-Cooled Pebble-Bed (HCPB) concept. The evaluations have been carried out by means of the MICROSHIELD code, starting from the data on the neutron-induced radioactivity in the blanket materials, already available for both the blanket modules. The possible sources of radioactive material in all the systems have been individuated and their contributes estimated.

Life cycle inventory analysis of hydrogen production by the steam-reforming process: comparison between vegetable oils and fossil fuels as feedstock

International Nuclear Information System (INIS)

Marquevich, M.; Sonnemann, G.W.; Castells, F.; Montane, D.

2002-01-01

A life cycle inventory analysis has been conducted to assess the environmental load, specifically CO 2 (fossil) emissions and global warming potential (GWP), associated to the production of hydrogen by the steam reforming of hydrocarbon feedstocks (methane and naphtha) and vegetable oils (rapeseed oil, soybean oil and palm oil). Results show that the GWPs associated with the production of hydrogen by steam reforming in a 100 years time frame are 9.71 and 9.46 kg CO 2 -equivalent/kg H 2 for natural gas and naphtha, respectively. For vegetable oils, the GWP decreases to 6.42 kg CO 2 -equivalent/kg H 2 for rapeseed oil, 4.32 for palm oil and 3.30 for soybean oil. A dominance analysis determined that the part of the process that has the largest effect on the GWP is the steam reforming reaction itself for the fossil fuel-based systems, which accounts for 56.7% and 74% of the total GWP for natural gas and naphtha, respectively. This contribution is zero for vegetable oil-based systems, for which harvesting and oil production are the main sources of CO 2 -eq emissions.(author)

Best practices and better protocols : guidance for a comprehensive community emissions inventory system from a high level review of international best practices

International Nuclear Information System (INIS)

Boston, A.

2007-11-01

A community greenhouse gas emission and energy inventory is an important tool to help local governments plan, implement and monitor climate change mitigation strategies and sustainable energy systems. Inventories can also facilitate a number of other local priorities such as air quality management; integrated land-use and transportation planning; infrastructure optimization and planning; and community economic development planning. The British Columbia government's community energy and emissions inventory initiative (CEEI) intends to collect and centralize high-quality geocoded data to generate high-value community inventories for the province's 185 local governments. This report presented strategic guidance for a comprehensive community emissions inventory system based on a high level review of international best practices. The report described the project objective and scope; guiding principles; research methodology; and inventory limitations. The report provided observations, findings and recommendations according to the following four areas: protocols and standards recommendations; data management systems recommendations; community inventory parameters recommendations; and reporting formats and capacity building recommendations. It was recommended that as CEEI progresses, consideration should be given to developing provincial level reports and online reporting of local government activity in order to strengthen awareness, recognize leadership and build support.17 refs., 2 tabs., 11 figs., 2 appendices

Radioactive scrap metal (RSM) inventory ampersand tracking system and prototype RSM field survey

International Nuclear Information System (INIS)

Thomas, T.R.

1994-09-01

Based on very preliminary information, it has been estimated that the radioactive scrap metal (RSM) inventories at DOE facilities amount to about 1.5 million tons and a much larger amount will be generated from decontamination and decommissioning of surplus DOE facilities. To implement a national DOE program for beneficial reuse of RSM, it will be necessary to known the location and characteristics of RSM inventories that are available and will be generated to match them with product demands. It is the intent of this task to provide a standardized methodology via a RSM database for recording, tracking, and reporting data on RSM inventories. A multiple relational database in dBASE IV was designed and a PC-based code was written in Clipper 5.0 syntax to expedite entry, editing, querying, and reporting of RSM survey data. The PC based-code, the multiple relational database files, and other external files used by the code to generate reports and queries constitute a customized software application called the RSM Inventory ampersand Tracking System (RSM I ampersand TS). A prototype RSM field survey was conducted at the Nevada Test Site (NTS) to demonstrate the field use of the RSM I ampersand TS and logistics of conducting the survey. During the demonstration, about 50 tons of RSM were sized, characterized, sorted, and packaged in transport containers

Reducing Inventory System Costs by Using Robust Demand Estimators

OpenAIRE

Raymond A. Jacobs; Harvey M. Wagner

1989-01-01

Applications of inventory theory typically use historical data to estimate demand distribution parameters. Imprecise knowledge of the demand distribution adds to the usual replenishment costs associated with stochastic demands. Only limited research has been directed at the problem of choosing cost effective statistical procedures for estimating these parameters. Available theoretical findings on estimating the demand parameters for (s, S) inventory replenishment policies are limited by their...

ITER Dynamic Tritium Inventory Modeling Code

International Nuclear Information System (INIS)

Cristescu, Ioana-R.; Doerr, L.; Busigin, A.; Murdoch, D.

2005-01-01

A tool for tritium inventory evaluation within each sub-system of the Fuel Cycle of ITER is vital, with respect to both the process of licensing ITER and also for operation. It is very likely that measurements of total tritium inventories may not be possible for all sub-systems, however tritium accounting may be achieved by modeling its hold-up within each sub-system and by validating these models in real-time against the monitored flows and tritium streams between the systems. To get reliable results, an accurate dynamic modeling of the tritium content in each sub-system is necessary. In order to optimize the configuration and operation of the ITER fuel cycle, a dynamic fuel cycle model was developed progressively in the decade up to 2000-2001. As the design for some sub-systems from the fuel cycle (i.e. Vacuum pumping, Neutral Beam Injectors (NBI)) have substantially progressed meanwhile, a new code developed under a different platform to incorporate these modifications has been developed. The new code is taking over the models and algorithms for some subsystems, such as Isotope Separation System (ISS); where simplified models have been previously considered, more detailed have been introduced, as for the Water Detritiation System (WDS). To reflect all these changes, the new code developed inside EU participating team was nominated TRIMO (Tritium Inventory Modeling), to emphasize the use of the code on assessing the tritium inventory within ITER

The Use of the Persian Translation of the Learning Transfer System Inventory in the Context of Agricultural Sustainability Learning in Iran

Science.gov (United States)

Zamani, Naser; Ataei, Pouria; Bates, Reid

2016-01-01

The Learning Transfer System Inventory considers 16 factors likely to influence the transfer of training to the workplace. This study uses the Persian translation of the inventory and applies it to agricultural sustainability learning in Iran. The aim is to examine the internal structure and predictive ability of the inventory as translated into…

Analysis of two production inventory systems with buffer, retrials and different production rates

Science.gov (United States)

Jose, K. P.; Nair, Salini S.

2017-09-01

This paper considers the comparison of two ( {s,S} ) production inventory systems with retrials of unsatisfied customers. The time for producing and adding each item to the inventory is exponentially distributed with rate β. However, a production rate α β higher than β is used at the beginning of the production. The higher production rate will reduce customers' loss when inventory level approaches zero. The demand from customers is according to a Poisson process. Service times are exponentially distributed. Upon arrival, the customers enter into a buffer of finite capacity. An arriving customer, who finds the buffer full, moves to an orbit. They can retry from there and inter-retrial times are exponentially distributed. The two models differ in the capacity of the buffer. The aim is to find the minimum value of total cost by varying different parameters and compare the efficiency of the models. The optimum value of α corresponding to minimum total cost is an important evaluation. Matrix analytic method is used to find an algorithmic solution to the problem. We also provide several numerical or graphical illustrations.

Purchasing and inventory management techniques for optimizing inventory investment

International Nuclear Information System (INIS)

McFarlane, I.; Gehshan, T.

1993-01-01

In an effort to reduce operations and maintenance costs among nuclear plants, many utilities are taking a closer look at their inventory investment. Various approaches for inventory reduction have been used and discussed, but these approaches are often limited to an inventory management perspective. Interaction with purchasing and planning personnel to reduce inventory investment is a necessity in utility efforts to become more cost competitive. This paper addresses the activities that purchasing and inventory management personnel should conduct in an effort to optimize inventory investment while maintaining service-level goals. Other functions within a materials management organization, such as the warehousing and investment recovery functions, can contribute to optimizing inventory investment. However, these are not addressed in this paper because their contributions often come after inventory management and purchasing decisions have been made

Inventory management of spare parts in an energy company

Energy Technology Data Exchange (ETDEWEB)

Guajardo, Mario; Roennqvist, Mikael; Halvorsen, Ann Mari; Kallevik, Svein Inge

2012-06-15

We address a problem of inventory management of spare parts in the context of a large energy company, producer of oil and gas. Spare parts are critical for assuring operational conditions in offshore platforms. About 200,000 different items are held in several inventory plants. The inventory system implemented at the company corresponds to a min-max system. The control parameters are decided based mainly on the expert judgment of the planners. Also, though the inventory plants can in practice be supplied from each other, the inventory planning is performed separately by the plant planners. This is because of different ownership structures where the studied company has the operative responsibility. The company is pursuing a system in which all planners conform to the same inventory management approach and evaluation, as well as being more cost efficient. Our work focuses on supporting this goal. We apply methods to decide the inventory control parameters for this system under a service level constraint. The methodology we use distinguishes unit-size and lot-size demand cases. We perform computational experiments to find control parameters for a sample of items. After the control parameters are found, we use them to explore the impact of risk pooling among the plants and inaccuracy arising from duplicate item codes.(Author)

Relationship of COP System Interest Inventory Scales to Vocational Preference Inventory (VPI) Scales in a College Sample: Construct Validity of Scales Based on Progressed Occupational Interest.

Science.gov (United States)

Omizo, Michael M.; And Others

1983-01-01

Construct validity data found some support for the California Occupational Preference System constructs when its results were evaluated on a sample of 213 female undergraduates relative to the Vocational Preference Inventory results. (PN)

Evaluating the Quality of Life of Glaucoma Patients Using the State-Trait Anxiety Inventory.

Science.gov (United States)

Otori, Yasumasa; Takahashi, Genichiro; Urashima, Mitsuyoshi; Kuwayama, Yasuaki

2017-11-01

To evaluate anxiety felt by glaucoma patients. In total, 472 glaucoma patients responded to a questionnaire on anxiety, subjective symptoms, and vision-related quality of life (VR-QOL) associated with glaucoma. Anxiety was evaluated using the State-Trait Anxiety Inventory (STAI), state anxiety (STAI-State) subscale along with our novel questionnaire, assessing visual function and subjective symptoms, specialized for glaucoma. VR-QOL was evaluated using 5 subitems from the 25-item National Eye Institute Visual Function Questionnaire (VFQ-25). Adherence to ophthalmic antiglaucoma agents was confirmed. As indexes of visual function, corrected visual acuity (measured by eye chart), mean deviation (MD) score (measured with static perimetry), and 4 thresholds at the center of vision were determined. Stages were classified according to the Aulhorn Classification. From the STAI-State scores, the prevalence of anxiety in glaucoma patients was evaluated. We analyzed the correlation between the STAI-State and VFQ-25, anxiety, subjective symptoms, adherence, and visual function indexes. In total, 78% of glaucoma patients experienced at least an intermediate level of anxiety. The STAI-State correlated significantly with anxiety and subjective symptoms as measured by our novel questionnaire, particularly for questions "current anxiety about loss of vision" and "current anxiety in life" (r=0.468 and 0.500; both Pglaucoma patients feel anxiety. The STAI-State is correlated with the VR-QOL and anxiety in glaucoma patients, making it useful for understanding the anxiety present in glaucoma patients.

[Habitability and life support systems].

Science.gov (United States)

Nefedov, Iu G; Adamovich, B A

1988-01-01

This paper discusses various aspects of space vehicle habitability and life support systems. It describes variations in the chemical and microbial composition of an enclosed atmosphere during prolonged real and simulated flights. The paper gives a detailed description of life support systems and environmental investigations onboard the Mir station. It also outlines the development of space vehicle habitability and life support systems as related to future flights.

Lost-sales inventory theory : A review

NARCIS (Netherlands)

Bijvank, Marco; Vis, Iris F. A.

2011-01-01

In classic inventory models it is common to assume that excess demand is backordered. However, studies analyzing customer behavior in practice show that most unfulfilled demand is lost or an alternative item/location is looked for in many retail environments. Inventory systems that include this

A systems approach to inventory management of repairables in the Navy

OpenAIRE

Apple, Chris Leon

1985-01-01

Approved for public release; distribution is unlimited This thesis develops an inventory model for repairable items which integrates the shipboard protection level into the wholesale stock level computations. It uses mean supply response time (MSRT) as its measure of effectiveness and provides methods for computing either the required wholesale stock level given a MSRT goal or for minimizing the system MSRT subject to budgetary constraints. Examples are provided which demons...

A single product perishing inventory model with demand interaction

African Journals Online (AJOL)

The paper describes a single perishing product inventory model in which ... continuous review inventory models have been studied recently by Yadavalli et al ...... stochastic inventory system with lost sales, Stochastic Analysis and Applications ...

Optimization of Inventory

OpenAIRE

PROKOPOVÁ, Nikola

2017-01-01

The subject of this thesis is optimization of inventory in selected organization. Inventory optimization is a very important topic in each organization because it reduces storage costs. At the beginning the inventory theory is presented. It shows the meaning and types of inventory, inventory control and also different methods and models of inventory control. Inventory optimization in the enterprise can be reached by using models of inventory control. In the second part the company on which is...

two-level inventory optimization under probability event chain

African Journals Online (AJOL)

Journal of Modeling, Design and Management of Engineering Systems ... The paper introduces the concept of effective inventory level, which is used to evaluate the impact of upstream shortage on downstream inventory, models the inventory at warehouse and retailer under random lead time and demand, and makes the ...

Design considerations for tropical forest inventories

Directory of Open Access Journals (Sweden)

Ronald Edward McRoberts

2013-06-01

Full Text Available Forests contribute substantially to maintaining the global greenhouse gas balance, primarily because among the five economic sectors identified by the United Nations Framework Convention on Climate Change, only the forestry sector has the potential to remove greenhouse gas emissions from the atmosphere. In this context, development of national forest carbon accounting systems, particularly in countries with tropical forests, has emerged as an international priority. Because these systems are often developed as components of or in parallel with national forest inventories, a brief review of statistical issues related to the development of forest ground sampling designs is provided. This overview addresses not only the primary issues of plot configurations and sampling designs, but also to a lesser extent the emerging roles of remote sensing and uncertainty assessment. Basic inventory principles are illustrated for two case studies, the national forest inventory of Brazil with special emphasis on the state of Santa Catarina, and an inventory for Tanzania.

Assessing the impact of a mountain pine beetle infestation on stand structure of lodgepole pine forests in Colorado using the Forest Inventory and Analysis Annual forest inventory

Science.gov (United States)

Michael T. Thompson

2017-01-01

The Forest Inventory and Analysis (FIA) annual inventory system began in Colorado in 2002, which coincided with the onset of a major mountain pine beetle (Dendroctonus ponderosae) epidemic. The mortality event, coupled with 11 years of annual inventory data, provided an opportunity to assess the usefulness of the FIA annual inventory system for quantifying the effects...

JIT: A Strategic Tool of Inventory Management

Science.gov (United States)

Singh, D. K.; Singh, Satyendra

2012-03-01

Investment in inventory absorbs a large portion of the working capital of a company and often it represents a large portion of the total assets of a business. By improving return on investment by increasing the rate of inventory turnover, management often wants to ensure economic efficiency. Effective inventory management enables a firm to provide lower costs, rapid response and flexibility for its customers. Just-in-time (JIT) philosophy is most widely adopted and practices in the recent years worldwide. It aims at reducing total production costs by producing only what is immediately needed and eliminates wastes. It is based on a radically different concept, deviating substantially from the existing manufacturing practices in many respects. It is a very effective tool to reduce the wastage of inventory and manage it effectively. It has the potential to bring substantial changes in the existing setup of a company; can give it a new face, broaden its acceptability and ensure a longer life. It can strategically change the atmosphere needed for longer survival. JIT is radically different from MRP and goes beyond materials management. The new outlook acquired by the company can meet global expectations of the cust

Evaluation of quality of life and sexual functioning of women using levonorgestrel-releasing intrauterine contraceptive system--Mirena.

Science.gov (United States)

Skrzypulec, Violetta; Drosdzol, Agnieszka

2008-12-01

The advantages ensuing from the high contraceptive efficacy, positive effect on the parameters of the menstrual cycle as well as other values of the levonorgestrel-releasing intrauterine system may play an important role in women's sexual life. The aim of the study was to evaluate the effect of the levonorgestrel-releasing intrauterine system on the quality of life and sexual functioning of women. The research encompassed 200 women aged between 30 and 45. 52 women using the levonorgestrel-releasing intrauterine system were qualified to the study as the research group (Mirena Group). The control groups consisted of 48 women using a different type of intrauterine device (Control Group I--Other IUD) and 50 women using no contraception (Control Group II). A specific questionnaire with a general part concerning socio-demographic conditions, a part dealing with contraception and Polish version of self-evaluation inventories: Short Form-36 Health Survey, Female Sexual Function Index and Mell-Krat Scale was used as a research tool. Quality of life parameters for women using the Mirena system were higher than for the control groups, especially in the aspect of general health, energy/fatigue and emotional well-being. A significant beneficial effect of the levonorgestrel-releasing intrauterine system on sexual functioning (sexual desire and arousal) was also revealed in the study. Sexual dysfunctions were diagnosed in 20.8% of Other IUD, 34.7% of Control Group II and 9.6% of Mirena Group. Levonorgestrel-releasing intrauterine system increases female quality of life and sexual functioning parameters.

NASA Advanced Exploration Systems: Advancements in Life Support Systems

Science.gov (United States)

Shull, Sarah A.; Schneider, Walter F.

2016-01-01

The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA’s Habitability Architecture Team.

Hybrid life-cycle environmental and cost inventory of sewage sludge treatment and end-use scenarios: a case study from China.

Science.gov (United States)

Murray, Ashley; Horvath, Arpad; Nelson, Kara L

2008-05-01

Sewage sludge management poses environmental, economic, and political challenges for wastewater treatment plants and municipalities around the globe. To facilitate more informed and sustainable decision making, this study used life-cycle inventory (LCI) to expand upon previous process-based LCIs of sewage sludge treatmenttechnologies. Additionally, the study evaluated an array of productive end-use options for treated sewage sludge, such as fertilizer and as an input into construction materials, to determine how the sustainability of traditional manufacturing processes changes with sludge as a replacement for other raw inputs. The inclusion of the life-cycle of necessary inputs (such as lime) used in sludge treatment significantly impacts the sustainability profiles of different treatment and end-use schemes. Overall, anaerobic digestion is generally the optimal treatment technology whereas incineration, particularly if coal-fired, is the most environmentally and economically costly. With respect to sludge end use, offsets are greatest for the use of sludge as fertilizer, but all of the productive uses of sludge can improve the sustainability of conventional manufacturing practices. The results are intended to help inform and guide decisions about sludge handling for existing wastewater treatment plants and those that are still in the planning phase in cities around the world. Although additional factors must be considered when selecting a sludge treatment and end-use scheme, this study highlights how a systems approach to planning can contribute significantly to improving overall environmental sustainability.

The role of brain/behavioural systems in prediction of quality of life and coping strategies in cancer patients

Directory of Open Access Journals (Sweden)

Shala Jangi Goujeh Biglou

2014-03-01

Full Text Available Background: It seems that individual differences in personality characteristics are implicated in the incidence and progress of physical diseases and socio-psychological consequences. However, there are a few studies about the role of personality in the prediction of socio-psychological consequences of cancer. The aim of this research was to survey the role of personality in the prediction of socio-psychosocial factors: quality of life and coping strategies. Methods: This research was a descriptive-correlational study in which the sample included fifty cancer patients who were selected through convenience sampling method. To assess the personality differences, quality of life and coping strategies, the Carver and White (1994 BIS/BAS Scales, SF-12 Health Survey and Coping Inventory for Stressful Situation (CISS were used, respectively. The data were analysed by SPSS software using Pearson correlation coefficient and stepwise regression. Results: The findings showed that Both BIS and BAS systems could predict the quality of life (P<0.001, BIS system could explain the emotion-oriented coping strategy (P<0.05 and avoidance-oriented coping stratesy (P<0.01 and BAS system could explain the problem-oriented coping strategy (P<0.001. Conclusion: The findings of this study showed that brain/behavioural systems can predict the quality of life and coping strategies in cancer patients. The identification of these systems in cancer patients can help recognize the persons that are under the risk of poor quality of life or have a higher chance of using inconsistent coping strategies, and execute preventive measures about them.

A Series Expansion Approach to Risk Analysis of an Inventory System with Sourcing

NARCIS (Netherlands)

Berkhout, J.; Heidergott, B.F.

2014-01-01

In this paper we extend the series expansion approach for uni-chain Markov processes to a special case of finite multi-chains with possible transient states. We will show that multi-chain Markov models arise naturally in simple models such as a single item inventory system with sourcing, i.e., with

Inventory management in the environment and the theory of constraints management accounting system throughput accounting

OpenAIRE

Elsukova Tatiana Vasilevna

2014-01-01

This article analyzes the techniques and methods of inventory management company with the information of a management accounting system based on the principles of the theory of constraints, both financial and non-financial.

Initial Radionuclide Inventories

Energy Technology Data Exchange (ETDEWEB)

H. Miller

2004-09-19

The purpose of this analysis is to provide an initial radionuclide inventory (in grams per waste package) and associated uncertainty distributions for use in the Total System Performance Assessment for the License Application (TSPA-LA) in support of the license application for the repository at Yucca Mountain, Nevada. This document is intended for use in postclosure analysis only. Bounding waste stream information and data were collected that capture probable limits. For commercially generated waste, this analysis considers alternative waste stream projections to bound the characteristics of wastes likely to be encountered using arrival scenarios that potentially impact the commercial spent nuclear fuel (CSNF) waste stream. For TSPA-LA, this radionuclide inventory analysis considers U.S. Department of Energy (DOE) high-level radioactive waste (DHLW) glass and two types of spent nuclear fuel (SNF): CSNF and DOE-owned (DSNF). These wastes are placed in two groups of waste packages: the CSNF waste package and the codisposal waste package (CDSP), which are designated to contain DHLW glass and DSNF, or DHLW glass only. The radionuclide inventory for naval SNF is provided separately in the classified ''Naval Nuclear Propulsion Program Technical Support Document'' for the License Application. As noted previously, the radionuclide inventory data presented here is intended only for TSPA-LA postclosure calculations. It is not applicable to preclosure safety calculations. Safe storage, transportation, and ultimate disposal of these wastes require safety analyses to support the design and licensing of repository equipment and facilities. These analyses will require radionuclide inventories to represent the radioactive source term that must be accommodated during handling, storage and disposition of these wastes. This analysis uses the best available information to identify the radionuclide inventory that is expected at the last year of last emplacement

Development of a Life Cycle Inventory of Water Consumption Associated with the Production of Transportation Fuels

Energy Technology Data Exchange (ETDEWEB)

Lampert, David J. [Argonne National Lab. (ANL), Argonne, IL (United States); Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Sullivan, John L. [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [American Association for the Advancemetn of Science (AAAS), Washington, DC (United States)

2015-10-01

The production of all forms of energy consumes water. To meet increased energy demands, it is essential to quantify the amount of water consumed in the production of different forms of energy. By analyzing the water consumed in different technologies, it is possible to identify areas for improvement in water conservation and reduce water stress in energy-producing regions. The transportation sector is a major consumer of energy in the United States. Because of the relationships between water and energy, the sustainability of transportation is tied to management of water resources. Assessment of water consumption throughout the life cycle of a fuel is necessary to understand its water resource implications. To perform a comparative life cycle assessment of transportation fuels, it is necessary first to develop an inventory of the water consumed in each process in each production supply chain. The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model is an analytical tool that can used to estimate the full life-cycle environmental impacts of various transportation fuel pathways from wells to wheels. GREET is currently being expanded to include water consumption as a sustainability metric. The purpose of this report was to document data sources and methodologies to estimate water consumption factors (WCF) for the various transportation fuel pathways in GREET. WCFs reflect the quantity of freshwater directly consumed per unit production for various production processes in GREET. These factors do not include consumption of precipitation or low-quality water (e.g., seawater) and reflect only water that is consumed (i.e., not returned to the source from which it was withdrawn). The data in the report can be combined with GREET to compare the life cycle water consumption for different transportation fuels.

Optimal issuing of perishables with a short fixed shelf life

NARCIS (Netherlands)

Haijema, R.

2011-01-01

The management of inventories of perishable products with a short maximal shelf life takes a good issuing policy next to a good ordering policy. Ordering policies of non-perishables are well studied in literature and implemented in Automated Store Ordering (ASO) systems and Computer Assisted

Inventory Optimization through Safety Stock Schemata

Directory of Open Access Journals (Sweden)

Abdul Aleem

2013-04-01

Full Text Available In the complex business environment and stiff competition, inventory optimization in an industry's supply chain has gained tremendous significance. It has become business imperative to optimally tune the supply chain and save lot of working capital by reducing inventory levels; this can surely be done while increasing the customer service level and utilizing the internal capacities optimally. Stock out costs and stock surplus costs both impact businesses badly, the former in the form of opportunity loss and resultantly causing customer annoyance and later in high financial markups and increasing cost and reducing margins accordingly. So inventory optimization can essentially help to reduce costs, which results in a considerable improvement of the company performance indicators. Traditional IMS (Inventory Management System followed in a selected manufacturing industry has been examined for all types of inventories, i.e. raw materials; WIP (Work In Process, and finished goods as a case study. The paper suggests an optimized inventory model for an organization to provide the best possible customer service within the restraint of the lowest practical inventory costs. The safety stock optimization was implemented in a complex business environment and considerable savings were realized thereof

Japanese national forest inventory and its spatial extension by remote sensing

Science.gov (United States)

Yasumasa Hirata; Mitsuo Matsumoto; Toshiro Iehara

2009-01-01

Japan has two independent forest inventory systems. One forest inventory is required by the forest planning system based on the Forest Law, in which forest registers and forest planning maps are prepared. The other system is a forest resource monitoring survey, in which systematic sampling is done at 4-km grid intervals. Here, we present these national forest inventory...

KENDALI OPTIMAL DARI SISTEM INVENTORI DENGAN PENINGKATAN DAN PENURUNAN BARANG

Directory of Open Access Journals (Sweden)

P Affandi

2016-03-01

Full Text Available Terdapat banyak permasalahan yang melibatkan teori sistem dan teori kontrol serta aplikasinya. Contohnya, beberapa referensi teori  yang mengaplikasikan teori kontrol ke dalam masalah inventori. Masalah klasik dalam masalah inventori adalah bagaimana mengatur perubahan permintaan konsumen pada sebuah produk barang jadi. Selain mengalami penurunan yang disebabkan kerusakan dan kemerosotan, ternyata inventori juga bisa mengalami peningkatan. Biasanya, inventori yang mengalami peningkatan terjadi pada inventori yang melakukan proses produksi yang berlangsung secara terus menerus; Sedangkan permintaan sedikit juga terjadi pada inventori makhluk hidup yang mengalami perkembangbiakan. Selanjutnya, hal ini mengakibatkan terjadinya peningkatan jumlah inventori. Dapat disimpulkan bahwa secara teori, sistem Inventori dapat mengalami peningkatan dan penurunan. Masalah ini dapat dimodelkan dan diselesaikan dengan menggunakan teknik kontrol optimal, sehingga akan diperoleh nilai optimal tingkat inventori dan rata-rata produksi optimal.There are many problems involving the theory of systems, control theory and its application. For example, some reference theories apply control theory to the inventory problems. The classical problem in the inventory problem was how to manage changes in consumer demand in a finished product. Besides it declines caused by damage and deterioration, evidently inventory can also increase. Typically, inventories that increased were inventories have production process continues over time; While little demand also occurred in inventories of living beings who have breeding. evidently, this led to an increasing in the amount of inventory. It can be concluded that, in theory, inventory system can be increased and decreased. This problem can be modeled and solved using optimal control techniques, so it will be obtained an optimum value of inventory levels and the average optimal production.

NWCF Evaporator Tank System 2001 Offgas Emissions Inventory

Energy Technology Data Exchange (ETDEWEB)

Boardman, Richard Doin; Lamb, Kenneth Mitchel; Matejka, Leon Anthony; Nenni, Joseph A

2002-02-01

An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5.

NWCF Evaporator Tank System 2001 Offgas Emissions Inventory

International Nuclear Information System (INIS)

Boardman, R.D.; Lamb, K.M.; Matejka, L.A.; Nenni, J.A.

2002-01-01

An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5

Life cycle inventory analysis of regenerative thermal oxidation of air emissions from oriented strand board facilities in Minnesota - a perspective of global climate change

Energy Technology Data Exchange (ETDEWEB)

Nicholson, W.J. [Potlatch Corp., San Francisco, CA (United States)

1997-12-31

Life cycle inventory analysis has been applied to the prospective operation of regenerative thermal oxidation (RTO) technology at oriented strand board plants at Bemidji (Line 1) and Cook, Minnesota. The net system destruction of VOC`s and carbon monoxide, and at Cook a small quantity of particulate, has a very high environmental price in terms of energy and water use, global warming potential, sulfur and nitrogen oxide emissions, solids discharged to water, and solid waste deposited in landfills. The benefit of VOC destruction is identified as minor in terms of ground level ozone at best and possibly slightly detrimental. Recognition of environmental tradeoffs associated with proposed system changes is critical to sound decision-making. There are more conventional ways to address carbon monoxide emissions than combustion in RTO`s. In an environment in which global warming is a concern, fuel supplemental combustion for environmental control does not appear warranted. Consideration of non-combustion approaches to address air emission issues at the two operations is recommended. 1 ref., 5 tabs.

Continued Development of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Prather, E. E.; English, T. R.; Desch, S. M.; Keller, J. M.; CATS

2010-01-01

The Solar System Concept Inventory (SSCI) was developed in order to provide a pre-/post-instruction assessment instrument suitable for use in an introductory solar system course. The topics included on the SSCI focus on formation mechanisms, planetary interiors, atmospheric and surface effects, and small solar system bodies. These topics were selected by having faculty identify the key concepts they address when teaching about the solar system. Student interviews were then conducted to identify common naive ideas and reasoning difficulties relating to these key topics. As of December 2009, the SSCI has been through four semesters of both pre- and post-instruction classroom testing, involving over 2000 students and 11 institutions (ranging from two-year colleges to doctoral/research universities). After each semester of testing, item analysis statistics such as point biserial, percentage correct on pre- or post-testing, and frequently-chosen distracters (incorrect answers) were used to flag ineffective questions. Flagged questions were revised or eliminated. We present an overall outline of the SSCI development as well as our question-flagging criteria and question analyses from the latest round of field-testing. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

Corrosion-product inventory: the Bruce-B secondary system

International Nuclear Information System (INIS)

Sawicki, J.A.; Price, J.; Brett, M.E.

1995-01-01

Corrosion inspection and corrosion-product characterization in water and steam systems are important for component and systems maintenance in nuclear power stations. Corrosion products are produced, released and redeposited at various sites in the secondary system. Depending on the alloys used in the condenser and feedwater heaters, particulate iron oxides and hydroxides can account for about 95-99% of the total corrosion-product transport. Where brass or cupro-nickel alloys are present, copper and zinc contribute significantly to the total transport and deposition. Particulates are transported by the feedwater to the steam generators, where they accumulate and can cause a variety of problems, such as loss of heat transfer capability through deposition on boiler tubes, blockage of flow through boiler-tube support plates and accelerated corrosion in crevices, either in deep sludge piles or at blocked tube supports. The influx of oxidized corrosion products may have a particularly adverse effect on the redox environment of steam generator tubing, thereby increasing the probability of localized corrosion and other degradation mechanisms. In this paper, there is a description of a survey of general corrosion deposits in Bruce-B, Units 5-8, which helps to identify the origin, evolution and inventory of corrosion products along the secondary system of Candu reactors

Validity, reliability and responsiveness of the Body Image Quality of Life Inventory in patients treated for infective endocarditis

DEFF Research Database (Denmark)

Rasmussen, Trine Bernholdt; Konradsen, Hanne; Dixon, Jane

2017-01-01

been validated in this patient population. The purpose of this study was thus to assess the validity, reliability and responsiveness of the Danish Body Image Quality of Life Inventory (BIQLI-DA) on patients treated for IE. METHODS: We evaluated the psychometric properties of the BIQLI-DA on data......: The BIQLI-DA may be applicable in healthcare research as it seems to be valid, reliable and responsive; however, evidence should be strengthened through further exploration of instrument performance, particularly regarding responsiveness.......: Participants were seventy patients with a mean age of 58 years and of which 83% were men. Results indicated convergent construct validity by confirming hypothesised associations to potentially related constructs. The BIQLI-DA was found to be highly internally consistent with a Cronbach's alpha of 0...

Life cycle assessments of urban water systems: a comparative analysis of selected peer-reviewed literature.

Science.gov (United States)

Loubet, Philippe; Roux, Philippe; Loiseau, Eleonore; Bellon-Maurel, Veronique

2014-12-15

Water is a growing concern in cities, and its sustainable management is very complex. Life cycle assessment (LCA) has been increasingly used to assess the environmental impacts of water technologies during the last 20 years. This review aims at compiling all LCA papers related to water technologies, out of which 18 LCA studies deals with whole urban water systems (UWS). A focus is carried out on these 18 case studies which are analyzed according to criteria derived from the four phases of LCA international standards. The results show that whereas the case studies share a common goal, i.e., providing quantitative information to policy makers on the environmental impacts of urban water systems and their forecasting scenarios, they are based on different scopes, resulting in the selection of different functional units and system boundaries. A quantitative comparison of life cycle inventory and life cycle impact assessment data is provided, and the results are discussed. It shows the superiority of information offered by multi-criteria approaches for decision making compared to that derived from mono-criterion. From this review, recommendations on the way to conduct the environmental assessment of urban water systems are given, e.g., the need to provide consistent mass balances in terms of emissions and water flows. Remaining challenges for urban water system LCAs are identified, such as a better consideration of water users and resources and the inclusion of recent LCA developments (territorial approaches and water-related impacts). Copyright © 2014 Elsevier Ltd. All rights reserved.

Setting safety stocks in multi-stage inventory systems under rolling horizon mathematical programming models

NARCIS (Netherlands)

Boulaksil, Y.; Fransoo, J.C.; van Halm, E.N.G.

2009-01-01

This paper considers the problem of determining safety stocks in multi-item multi-stage inventory systems that face demand uncertainties. Safety stocks are necessary to make the supply chain, which is driven by forecasts of customer orders, responsive to (demand) uncertainties and to achieve

For a national reference inventory of of radioactive wastes

International Nuclear Information System (INIS)

2000-05-01

This document is the second volume of the report concerning the mission of the ANDRA on the radioactive wastes inventory methodology. It presents the annexes of the mission management, the main channels of wastes production, the existing inventories, the foreign experiments, a first version of the specification of the inventories data management united system, the management system of reprocessing wastes for foreigner customers, order of magnitude, bibliography and glossary. (A.L.B.)

Inventory management in the environment and the theory of constraints management accounting system throughput accounting

Directory of Open Access Journals (Sweden)

Elsukova Tatiana Vasilevna

2014-02-01

Full Text Available This article analyzes the techniques and methods of inventory management company with the information of a management accounting system based on the principles of the theory of constraints, both financial and non-financial.

Optimal Control Inventory Stochastic With Production Deteriorating

Science.gov (United States)

Affandi, Pardi

2018-01-01

In this paper, we are using optimal control approach to determine the optimal rate in production. Most of the inventory production models deal with a single item. First build the mathematical models inventory stochastic, in this model we also assume that the items are in the same store. The mathematical model of the problem inventory can be deterministic and stochastic models. In this research will be discussed how to model the stochastic as well as how to solve the inventory model using optimal control techniques. The main tool in the study problems for the necessary optimality conditions in the form of the Pontryagin maximum principle involves the Hamilton function. So we can have the optimal production rate in a production inventory system where items are subject deterioration.

Automated data acquisition and analysis system for inventory verification

International Nuclear Information System (INIS)

Sorenson, R.J.; Kaye, J.H.

1974-03-01

A real-time system is proposed which would allow CLO Safeguards Branch to conduct a meaningful inventory verification using a variety of NDA instruments. The overall system would include the NDA instruments, automated data handling equipment, and a vehicle to house and transport the instruments and equipment. For the purpose of the preliminary cost estimate a specific data handling system and vehicle were required. A Tracor Northern TN-11 data handling system including a PDP-11 minicomputer and a measurement vehicle similar to the Commission's Regulatory Region I van were used. The basic system is currently estimated to cost about $100,000, and future add-ons which would expand the systems' capabilities are estimated to cost about $40,000. The concept of using a vehicle in order to permanently rack mount the data handling equipmentoffers a number of benefits such as control of equipment environment and allowance for improvements, expansion, and flexibility in the system. Justification is also presented for local design and assembly of the overall system. A summary of the demonstration system which illustrates the advantages and feasibility of the overall system is included in this discussion. Two ideas are discussed which are not considered to be viable alternatives to the proposed system: addition of the data handling capabilities to the semiportable ''cart'' and use of a telephone link to a large computer center

Reactor inventory monitoring system for Angra-1 reactor; Sistema de monitoracao de inventario do reator para usina nuclear Angra I

Energy Technology Data Exchange (ETDEWEB)

S Neto, Joaquim A.; Silva, Marcos C.; Pinheiro, Ronaldo F.M. [Furnas Centrais Eletricas S.A., Rio de Janeiro, RJ (Brazil); Soares, Milton [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil); Martinez, Aquilino; Comerlato, Cesar A.; Oliveira, Eugenio A. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Monitoracao de Processos

1996-07-01

This work describes the project of Reactor Inventory Monitoring System, which will be installed in Angra I Nuclear Power Plant. The inventory information is important to the operators take corrective actions in case of an incident that may cause a failure in the core cooling. (author)

Configuration model of partial repairable spares under batch ordering policy based on inventory state

Institute of Scientific and Technical Information of China (English)

Ruan Minzhi; Luo Yi; Li Hua

2014-01-01

Rational planning of spares configuration project is an effective approach to improve equipment availability as well as reduce life cycle cost (LCC). With an analysis of various impacts on support system, the spares demand rate forecast model is constructed. According to systemic analysis method, spares support effectiveness evaluation indicators system is built, and then, initial spares configuration and optimization method is researched. To the issue of discarding and con-sumption for incomplete repairable items, its expected backorders function is approximated by Laplace demand distribution. Combining the (s-1, s) and (R, Q) inventory policy, the spares resup-ply model is established under the batch ordering policy based on inventory state, and the optimi-zation analysis flow for spares configuration is proposed. Through application on shipborne equipment spares configuration, the given scenarios are analyzed under two constraint targets:one is the support effectiveness, and the other is the spares cost. Analysis reveals that the result is consistent with practical regulation;therefore, the model’s correctness, method’s validity as well as optimization project’s rationality are proved to a certain extent.

Gravity insensitive inventory control device for a two-phase flow system

International Nuclear Information System (INIS)

Bland, T.J.

1987-01-01

A liquid inventory control device is described for a flow system where the liquid changes phase to a vapor and back and a pitot pump separates vapor from liquid and pumps the liquid to a component of the flow system comprising: a liquid storage device for storing liquid under pressure, a tube positioned within the pitot pump and in open communication with the liquid storage device, and the tube having an opening positioned within the pitot pump at a location to establish a desired liquid level in the pitot pump and at which level the pressure at the pitot tube inlet will equal the liquid pressure at the liquid storage device

From Trust to Intimacy: A New Inventory for Examining Erikson's Stages of Psychosocial Development.

Science.gov (United States)

Rosenthal, Doreen A.; And Others

1981-01-01

A new inventory for examining the first six of Erikson's psychosocial stages is described. It is concluded that the Erikson Psychosocial Stage Inventory (EPSI), a self-report questionnaire, is a useful measure for researchers interested in development from early adolescence and in mapping changes as a function of life events. (Author/GK)

Evaluation of hospital medication inventory policies.

Science.gov (United States)

Gebicki, Marek; Mooney, Ed; Chen, Shi-Jie Gary; Mazur, Lukasz M

2014-09-01

As supply chain costs constitute a large portion of hospitals' operating expenses and with $27.7 billion spent by the US hospitals on drugs alone in 2009, improving medication inventory management provides a great opportunity to decrease the cost of healthcare. This study investigates different management approaches for a system consisting of one central storage location, the main pharmacy, and multiple dispensing machines located in each department. Each medication has a specific unit cost, availability from suppliers, criticality level, and expiration date. Event-driven simulation is used to evaluate the performance of several inventory policies based on the total cost and patient safety (service level) under various arrangements of the system defined by the number of drugs and departments, and drugs' criticality, availability, and expiration levels. Our results show that policies that incorporate drug characteristics in ordering decisions can address the tradeoff between patient safety and cost. Indeed, this study shows that such policies can result in higher patient safety and lower overall cost when compared to traditional approaches. Additional insights from this study allow for better understanding of the medication inventory system's dynamics and suggest several directions for future research in this topic. Findings of this study can be applied to help hospital pharmacies with managing their inventory.

The development of in-process inventory walk-through examination system in the process at borrowing inspection between LEU fuel fabrication plants

International Nuclear Information System (INIS)

Nakamura, Norihito; Namekawa, Masaru; Owada, Isao; Kikuchi, Masaru; Kodani, Yoshiki; Nozawa, Yukio

2005-01-01

Since the Nuclear Material Control Center (NMCC) was designed the safeguards inspection organization by Ministry of Education, Culture, Sports, Science and Technology (MEXT) in December 1999, the NMCC has been performing safeguards inspection for the Nuclear Facilities in Japan. The NMCC has carried out the safeguards inspections to LEU Fuel Fabrication Plants (FFPs) and the NMCC has improved the method of safeguards inspection as it has changed over to the integrated safeguards from the year of 2005. Concerning the Borrowing inspection between LEU FFPs, which is the precondition to change over to the integrated safeguards, it is needed to estimate the entire inventory in the facility within the limited time. Therefore, the NMCC has developed the system called IWES (In-process inventory Walk-through Examination System) to examine the inventory in process smoothly, quickly and correctly at borrowing inspection, check the entire inventory quantity and evaluate them. This report describes how IWES aiming at effective/efficient confirmation of in-process inventory has been developed and how it is applied to the borrowing inspection activities. (author)

Inventory Analysis and Social Life Cycle Assessment of Greenhouse Gas Emissions from Waste-to-Energy Incineration in Taiwan

Directory of Open Access Journals (Sweden)

Yu-Tsang Lu

2017-10-01

Full Text Available Waste-to-energy (WtE incineration technology is widely used to solve the energy supply, greenhouse gas emissions, and waste generation problems in urban areas. In Taiwan, there are new laws and regulations that would affect greenhouse gas management of WtE incineration plants. This research aims to identify or raise key issues to be promoted for WtE incineration plants due to existing management systems and complex issues mixed with GHG, energy, and solid waste treatment. This study utilizes inventory analysis and social LCA (SLCA approach on GHG management of WtE incineration plants in Taiwan to systematically identify materiality issues to be promoted. According to the results of materiality analysis for SLCA, this study generalizes four stakeholders, nine subcategories, and their 15 inventory indicators; and concludes that, among assessment results of 15 inventory indicators, three indicators are at a high level, four at a medium level, and eight at a low level. In total, 12 materiality issues are recognized. This study suggests WtE incineration plants should consider the following materiality issues with respect to priority: a systematic database and calculation methods, the goal and criteria of the laws and regulations, technology development toward circular economy and promotion activity or opportunity for local community and organization level.

Concepts for reducing nuclear utility inventory carrying costs

International Nuclear Information System (INIS)

Graybill, R.E.; DiCola, F.E.; Solanas, C.H.

1985-01-01

Nuclear utilities are under pressure to reduce their operating and maintenance expenses such that the total cost of generating electricity through nuclear power remains an economically attractive option. One area in which expenses may be reduced is total inventory carrying cost. The total inventory carrying cost consists of financing an inventory, managing the inventory, assuring quality, engineering of acceptable parts specifications, and procuring initial and replenishment stock. Concepts and methodology must be developed to reduce the remaining expenses of a utility's total inventory carrying cost. Currently, two concepts exist: pooled inventory management system (PIMS), originally established by General Electric Company and a group of boiling water reactor owners, and Nuclear Parts Associates' (NUPA) shared inventory management program (SIMP). Both concepts share or pool parts and components among utilities. The SIMP program objectives and technical activities are summarized

VA Enterprise Data Inventory

Data.gov (United States)

Department of Veterans Affairs — The Department of Veterans Affairs Enterprise Data Inventory accounts for all of the datasets used in the agency's information systems. This entry was approved for...

Introduction to Life Support Systems

Science.gov (United States)

Perry, Jay

2017-01-01

This course provides an introduction to the design and development of life support systems to sustain humankind in the harsh environment of space. The life support technologies necessary to provide a respirable atmosphere and clean drinking water are emphasized in the course. A historical perspective, beginning with open loop systems employed aboard the earliest crewed spacecraft through the state-of-the-art life support technology utilized aboard the International Space Station today, will provide a framework for students to consider applications to possible future exploration missions and destinations which may vary greatly in duration and scope. Development of future technologies as well as guiding requirements for designing life support systems for crewed exploration missions beyond low-Earth orbit are also considered in the course.

Installation and early operation of a complex low inventory cryogenic distillation system for the Princeton TFTR

International Nuclear Information System (INIS)

Busigin, A.; Busigin, C.J.; Robins, J.R.; Woodall, K.B.; Bellamy, D.G.; Fong, C.; Kalyanam, K.; Sood, S.K.

1995-01-01

A low inventory Tritium Purification System (TPS) has just been installed at the Princeton Plasma Physics Laboratory (PPPL). The TPS was designed specifically for PPPL, based on their specifications for exhaust gases. The generic design, however, can easily be modified to accept a large variety of input conditions. The Princeton system is designed to have a total tritium inventory of approximately 0.5 g while producing pure product streams consisting of H 2 , D 2 , and T 2 . The purpose of the system is to separate and recycle unburnt tritium from the TFTR and to produce hydrogen and deuterium streams that are free of tritium. These streams can be disposed by stacking, thus eliminating the need to create large volume waste streams that are contaminated with tritium and that must be managed for permanent disposal. This paper will discuss the installation, the modifications and preliminary results of operation of this system at Princeton. 2 refs., 3 figs

Temporal discounting in life cycle assessment: A critical review and theoretical framework

International Nuclear Information System (INIS)

Yuan, Chris; Wang, Endong; Zhai, Qiang; Yang, Fan

2015-01-01

Temporal homogeneity of inventory data is one of the major problems in life cycle assessment (LCA). Addressing temporal homogeneity of life cycle inventory data is important in reducing the uncertainties and improving the reliability of LCA results. This paper attempts to present a critical review and discussion on the fundamental issues of temporal homogeneity in conventional LCA and propose a theoretical framework for temporal discounting in LCA. Theoretical perspectives for temporal discounting in life cycle inventory analysis are discussed first based on the key elements of a scientific mechanism for temporal discounting. Then generic procedures for performing temporal discounting in LCA is derived and proposed based on the nature of the LCA method and the identified key elements of a scientific temporal discounting method. A five-step framework is proposed and reported in details based on the technical methods and procedures needed to perform a temporal discounting in life cycle inventory analysis. Challenges and possible solutions are also identified and discussed for the technical procedure and scientific accomplishment of each step within the framework. - Highlights: • A critical review for temporal homogeneity problem of life cycle inventory data • A theoretical framework for performing temporal discounting on inventory data • Methods provided to accomplish each step of the temporal discounting framework

Unified Communications for Space Inventory Management

Science.gov (United States)

Gifford, Kevin K.; Fink, Patrick W.; Barton, Richard; Ngo, Phong H.

2009-01-01

To help assure mission success for long-duration exploration activities, NASA is actively pursuing wireless technologies that promote situational awareness and autonomy. Wireless technologies are typically extensible, offer freedom from wire tethers, readily support redundancy, offer potential for decreased wire weight, and can represent dissimilar implementation for increased reliability. In addition, wireless technologies can enable additional situational awareness that otherwise would be infeasible. For example, addition of wired sensors, the need for which might not have been apparent at the outset of a program, night be extremely costly due in part to the necessary routing of cables through the vehicle. RFID, or radio frequency identification, is a wireless technology with the potential for significant savings and increased reliability and safety in space operations. Perhaps the most obvious savings relate to the application of inventory management. A fully automated inventory management system is highly desirable for long-term sustaining operations in space environments. This assertion is evidenced by inventory activities on the International Space Station, which represents the most extensive inventory tracking experience base in the history of space operations. In the short tern, handheld RFID readers offer substantial savings owing to reduced crew time for inventory audits. Over the long term, a combination of improved RFID technology and operational concepts modified to fully utilize the technology should result in space based inventory management that is highly reliable and requires very little crew time. In addition to inventory management, RFID is likely to find space applications in real-time location and tracking systems. These could vary from coarse-resolution RFID portals to the high resolution afforded by ultra-wideband (UWB) RFID. Longer range RFID technologies that leverage passive surface acoustic wave (SAW) devices are being investigated to

The customer waiting time in an (R,s,Q) inventory system

NARCIS (Netherlands)

Kiesmüller, G.P.; Kok, de A.G.

2006-01-01

In practice of inventory management customer-oriented service measures play an important role. If inventory managers of stockpoints in a supply chain promise specific times of delivery that cannot be met due to a lack of stock, leadtimes at downstream stockpoints increase, causing substantial

Integrated Model of Bioenergy and Agriculture System

DEFF Research Database (Denmark)

Sigurjonsson, Hafthor Ægir; Elmegaard, Brian; Clausen, Lasse Røngaard

2015-01-01

Due to increased burden on the environment caused by human activities, focus on industrial ecology designs are gaining more attention. In that perspective an environ- mentally effective integration of bionergy and agriculture systems has significant potential. This work introduces a modeling...... of the overall model. C- TOOL and Yasso07 are used in the carbon balance of agri- culture, Dynamic Network Analysis is used for the energy simulation and Brightway2 is used to build a Life Cycle Inventory compatible database and processes it for vari- ous impacts assessment methods. The model is success- fully...... approach that builds on Life Cycle Inventory and carries out Life Cycle Impact Assessment for a con- sequential Life Cycle Assessment on integrated bioenergy and agriculture systems. The model framework is built in Python which connects various freely available soft- ware that handle different aspects...

A production inventory model with deteriorating items and shortages

Directory of Open Access Journals (Sweden)

Samanta G.P.

2004-01-01

Full Text Available A continuous production control inventory model for deteriorating items with shortages is developed. A number of structural properties of the inventory system are studied analytically. The formulae for the optimal average system cost, stock level, backlog level and production cycle time are derived when the deterioration rate is very small. Numerical examples are taken to illustrate the procedure of finding the optimal total inventory cost, stock level, backlog level and production cycle time. Sensitivity analysis is carried out to demonstrate the effects of changing parameter values on the optimal solution of the system.

A comparative life cycle assessment of marine power systems

International Nuclear Information System (INIS)

Ling-Chin, Janie; Roskilly, Anthony P.

2016-01-01

Highlights: • Correlation among resources, emissions, key components and processes was attained. • Environmental benefits of innovative power systems were verified. • New-build system showed a great advantage over retrofit and conventional systems. • Relative contribution of significant components remained or became more profound. • Influence of fuel consumption quantity over the estimates varied with impact types. - Abstract: Despite growing interest in advanced marine power systems, knowledge gaps existed as it was uncertain which configuration would be more environmentally friendly. Using a conventional system as a reference, the comparative life cycle assessment (LCA) study aimed to compare and verify the environmental benefits of advanced marine power systems i.e. retrofit and new-build systems which incorporated emerging technologies. To estimate the environmental impact attributable to each system, a bottom-up integrated system approach was applied, i.e. LCA models were developed for individual components using GaBi, optimised operational profiles and input data standardised from various sources. The LCA models were assessed using CML2001, ILCD and Eco-Indicator99 methodologies. The estimates for the advanced systems were compared to those of the reference system. The inventory analysis results showed that both retrofit and new-build systems consumed less fuels (8.28% and 29.7% respectively) and released less emissions (5.2–16.6% and 29.7–55.5% respectively) during operation whilst more resources were consumed during manufacture, dismantling and the end of life. For 14 impact categories relevant to global warming, acidification, eutrophication, photochemical ozone creation and PM/respiratory inorganic health issues, reduction in LCIA results was achieved by retrofit (2.7–6.6%) and new-build systems (35.7–50.7%). The LCIA results of the retrofit system increased in ecotoxicity (1–8%), resource depletion (1–2%) and fossil fuel depletion

Design Rules for Life Support Systems

Science.gov (United States)

Jones, Harry

2002-01-01

This paper considers some of the common assumptions and engineering rules of thumb used in life support system design. One general design rule is that the longer the mission, the more the life support system should use recycling and regenerable technologies. A more specific rule is that, if the system grows more than half the food, the food plants will supply all the oxygen needed for the crew life support. There are many such design rules that help in planning the analysis of life support systems and in checking results. These rules are typically if-then statements describing the results of steady-state, "back of the envelope," mass flow calculations. They are useful in identifying plausible candidate life support system designs and in rough allocations between resupply and resource recovery. Life support system designers should always review the design rules and make quick steady state calculations before doing detailed design and dynamic simulation. This paper develops the basis for the different assumptions and design rules and discusses how they should be used. We start top-down, with the highest level requirement to sustain human beings in a closed environment off Earth. We consider the crew needs for air, water, and food. We then discuss atmosphere leakage and recycling losses. The needs to support the crew and to make up losses define the fundamental life support system requirements. We consider the trade-offs between resupplying and recycling oxygen, water, and food. The specific choices between resupply and recycling are determined by mission duration, presence of in-situ resources, etc., and are defining parameters of life support system design.

Life-cycle environmental performance of renewable building materials in the context of residential construction : phase II research report : an extension to the 2005 phase I research report. Module N, Life-cycle inventory of manufacturing prefinished engineered wood flooring in the eastern United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2011-01-01

This study summarizes the environmental performance of prefinished engineered wood flooring using life-cycle inventory (LCI) analysis. Using primary mill data gathered from manufacturers in the eastern United States and applying the methods found in Consortium for Research on Renewable Industrial Materials (CORRIM) Research Guidelines and International Organization of...

Process control and safeguards system plutonium inventory conrol for MOX fuel facility

International Nuclear Information System (INIS)

Mishima, T.; Aoki, M.; Muto, T.; Amanuma, T.

1979-01-01

The plutonium inventory control (PINC) system is a real-time material accountability control system that is expected to be applied to a new large-scale plutonium fuel production facility for both fast breeder reactor and heavy water reactor at the Power Reactor and Nuclear Development Corporation. The PINC is basically a system for material control but is expected to develop into a whole facility control system, including criticality control, process control, quality control, facility protection, and so forth. Under PINC, every process and storage area is divided into a unit area, which is the smallest unit for both accountability and process control. Item and material weight automatically are accounted for at every unit area, and data are simultaneously treated by a computer network system. Sensors necessary for the system are being developed. 9 figures

Life cycle inventory and carbon and water FoodPrint of fruits and vegetables: application to a Swiss retailer.

Science.gov (United States)

Stoessel, Franziska; Juraske, Ronnie; Pfister, Stephan; Hellweg, Stefanie

2012-03-20

Food production and consumption is known to have significant environmental impacts. In the present work, the life cycle assessment methodology is used for the environmental assessment of an assortment of 34 fruits and vegetables of a large Swiss retailer, with the aim of providing environmental decision-support to the retailer and establishing life cycle inventories (LCI) also applicable to other case studies. The LCI includes, among others, seedling production, farm machinery use, fuels for the heating of greenhouses, irrigation, fertilizers, pesticides, storage and transport to and within Switzerland. The results show that the largest reduction of environmental impacts can be achieved by consuming seasonal fruits and vegetables, followed by reduction of transport by airplane. Sourcing fruits and vegetables locally is only a good strategy to reduce the carbon footprint if no greenhouse heating with fossil fuels is involved. The impact of water consumption depends on the location of agricultural production. For some crops a trade-off between the carbon footprint and the induced water stress is observed. The results were used by the retailer to support the purchasing decisions and improve the supply chain management.

Life cycle and nano-products: end-of-life assessment

International Nuclear Information System (INIS)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael

2012-01-01

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center’s Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http://www.nanotechproject.org/inventories/consumer/browse/categories/http://www.nanotechproject.org/inventories

Life cycle and nano-products: end-of-life assessment

Energy Technology Data Exchange (ETDEWEB)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael, E-mail: mrovercash@earthlink.net [Wichita State University, Department of Industrial and Manufacturing Engineering (United States)

2012-03-15

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center's Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http://www.nanotechproject.org/inventories/consumer/browse/categories/http://www.nanotechproject.org/inventories

Greenhouse gas emission inventory based on full energy chain analysis

International Nuclear Information System (INIS)

Dones, R.; Hirschberg, S.; Knoepfel, I.

1996-01-01

Methodology, characteristics, features and results obtained for greenhouse gases within the recent Swiss LCA study 'Environmental Life-Cycle Inventories of Energy Systems' are presented. The focus of the study is on existing average Full Energy Chains (FENCHs) in the electricity generation mixes in Europe and in Switzerland. The systems, including coal (hard coal and lignite), oil, natural gas, nuclear and hydro, are discussed one by one as well as part of the electricity mixes. Photovoltaic systems are covered separately since they are not included in the electricity mixes. A sensitivity analysis on methane leakage during long-range transport via pipeline is shown. Whilst within the current study emissions are not attributed to specific countries, the main sectors contributing to the total GHGs emissions calculated for the various FENCHs are specified. (author). 10 refs, 10 figs, 9 tabs

Greenhouse gas emission inventory based on full energy chain analysis

Energy Technology Data Exchange (ETDEWEB)

Dones, R; Hirschberg, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Knoepfel, I [Federal Inst. of Technology Zurich, Zurich (Switzerland)

1996-07-01

Methodology, characteristics, features and results obtained for greenhouse gases within the recent Swiss LCA study `Environmental Life-Cycle Inventories of Energy Systems` are presented. The focus of the study is on existing average Full Energy Chains (FENCHs) in the electricity generation mixes in Europe and in Switzerland. The systems, including coal (hard coal and lignite), oil, natural gas, nuclear and hydro, are discussed one by one as well as part of the electricity mixes. Photovoltaic systems are covered separately since they are not included in the electricity mixes. A sensitivity analysis on methane leakage during long-range transport via pipeline is shown. Whilst within the current study emissions are not attributed to specific countries, the main sectors contributing to the total GHGs emissions calculated for the various FENCHs are specified. (author). 10 refs, 10 figs, 9 tabs.

FIREMON: Fire effects monitoring and inventory system

Science.gov (United States)

Duncan C. Lutes; Robert E. Keane; John F. Caratti; Carl H. Key; Nathan C. Benson; Steve Sutherland; Larry J. Gangi

2006-01-01

Monitoring and inventory to assess the effects of wildland fire is critical for 1) documenting fire effects, 2) assessing ecosystem damage and benefit, 3) evaluating the success or failure of a burn, and 4) appraising the potential for future treatments. However, monitoring fire effects is often difficult because data collection requires abundant funds, resources, and...

Inventory parameters

CERN Document Server

Sharma, Sanjay

2017-01-01

This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

Concepts for inventory verification in critical facilities

International Nuclear Information System (INIS)

Cobb, D.D.; Sapir, J.L.; Kern, E.A.; Dietz, R.J.

1978-12-01

Materials measurement and inventory verification concepts for safeguarding large critical facilities are presented. Inspection strategies and methods for applying international safeguards to such facilities are proposed. The conceptual approach to routine inventory verification includes frequent visits to the facility by one inspector, and the use of seals and nondestructive assay (NDA) measurements to verify the portion of the inventory maintained in vault storage. Periodic verification of the reactor inventory is accomplished by sampling and NDA measurement of in-core fuel elements combined with measurements of integral reactivity and related reactor parameters that are sensitive to the total fissile inventory. A combination of statistical sampling and NDA verification with measurements of reactor parameters is more effective than either technique used by itself. Special procedures for assessment and verification for abnormal safeguards conditions are also considered. When the inspection strategies and inventory verification methods are combined with strict containment and surveillance methods, they provide a high degree of assurance that any clandestine attempt to divert a significant quantity of fissile material from a critical facility inventory will be detected. Field testing of specific hardware systems and procedures to determine their sensitivity, reliability, and operational acceptability is recommended. 50 figures, 21 tables

Tritium inventory tracking and management

International Nuclear Information System (INIS)

Eichenberg, T.W.; Klein, A.C.

1990-01-01

This investigation has identified a number of useful applications of the analysis of the tracking and management of the tritium inventory in the various subsystems and components in a DT fusion reactor system. Due to the large amounts of tritium that will need to be circulated within such a plant, and the hazards of dealing with the tritium an electricity generating utility may not wish to also be in the tritium production and supply business on a full time basis. Possible scenarios for system operation have been presented, including options with zero net increase in tritium inventory, annual maintenance and blanket replacement, rapid increases in tritium creation for the production of additional tritium supplies for new plant startup, and failures in certain system components. It has been found that the value of the tritium breeding ratio required to stabilize the storage inventory depends strongly on the value and nature of other system characteristics. The real operation of a DT fusion reactor power plant will include maintenance and blanket replacement shutdowns which will affect the operation of the tritium handling system. It was also found that only modest increases in the tritium breeding ratio are needed in order to produce sufficient extra tritium for the startup of new reactors in less than two years. Thus, the continuous operation of a reactor system with a high tritium breeding ratio in order to have sufficient supplies for other plants is not necessary. Lastly, the overall operation and reliability of the power plant is greatly affected by failures in the fuel cleanup and plasma exhaust systems

Dynamic pricing and inventory control with delivery flexibility

DEFF Research Database (Denmark)

Chen, Wen; He, Ying

2018-01-01

We study a multi-period inventory system with price-sensitive demand and uncertain supplier, focusing on the advantage of delivery flexibility. The optimal pricing and inventory replenishment decisions are explored. We also investigate the changes of marginal profit, optimal order quantities...

Life-History and Developmental Antecedents of Female Vocational Preferences.

Science.gov (United States)

Reichel, Laura S.; Muchinsky, Paul M.

1995-01-01

A group of 296 female undergraduates completed the Strong Interest Inventory, Biographical Questionnaire, Bem Sex-Role Inventory, and Self-Esteem Inventory. Life history was a better predictor of vocational interests than either sex-role orientation or self-esteem. The only significant exception was that Femininity correlated with interest in…

Numerical computation of inventory policies, based on the EOQ/sigma-x value for order-point systems

DEFF Research Database (Denmark)

Alstrøm, Poul

2001-01-01

This paper examines the numerical computation of two control parameters, order size and order point in the well-known inventory control model, an (s,Q)system with a beta safety strategy. The aim of the paper is to show that the EOQ/sigma-x value is both sufficient for controlling the system and e...

Numerical computation of inventory policies, based on the EOQ/sigma-x value for order-point systems

DEFF Research Database (Denmark)

Alstrøm, Poul

2000-01-01

This paper examines the numerical computation of two control parameters, order size and order point in the well-known inventory control model, an (s,Q)system with a beta safety strategy. The aim of the paper is to show that the EOQ/sigma-x value is both sufficient for controlling the system and e...

Feasibility, reliability and validity of the Thai version of the Pediatric Quality of Life Inventory 3.0 cerebral palsy module.

Science.gov (United States)

Tantilipikorn, Pinailug; Watter, Pauline; Prasertsukdee, Saipin

2013-03-01

Quality of Life (QOL) and Health-related Quality of Life (HRQOL) are now considered as necessary outcome measures for children with cerebral palsy (CP). Various reliable and valid condition-specific HRQOL tools are available for these children. One of these is Pediatric Quality of Life Inventory (PedsQL) 3.0 CP module which has been widely used and was translated to many languages. As no Thai version is available, the authors have completed this translation. This study then aimed to investigate psychometric properties of the newly translated Thai PedsQL 3.0 CP module and to establish parent confidence in their ratings in the translated tool. Translation of the PedsQL 3.0 CP module was performed based on linguistic translation guidelines. Then, the psychometric properties of the Thai version were established. PedsQL 3.0 CP module was completed by children with CP and their parents or caregivers twice with 2-4 weeks. Respondents were 97 parents or caregivers and 54 children. Minimal missing data were found. Acceptable internal consistency was supported except for Movement and Balance Scale (self-report). Intraclass correlation coefficients for parent proxy and self-report were good to excellent (0.684-0.950). The feasibility, reliability and validity of the translated tool were supported.

Joint optimisation of spare part inventory, maintenance frequency and repair capacity for k-out-of-N systems

NARCIS (Netherlands)

de Smidt-Destombes, Karin S.; van der Heijden, Matthijs C.; van Harten, Aart

2009-01-01

To achieve a high system availability at minimal costs, relevant decisions include the choice of preventive maintenance frequency, spare part inventory levels and spare part repair capacity. We develop heuristics for the joint optimisation of these variables for (a) a single k-out-of-N system under

Inventory Management in Delta Allied Wire Industries Limited Asaba ...

African Journals Online (AJOL)

A good inventory system reduces production cost and consequently increases profit. Optimum management of inventory in the Delta – Allied Wire Industries ... under review and customers' handling processes equally studied for improvement.

Dynamic optimization approach for integrated supplier selection and tracking control of single product inventory system with product discount

Science.gov (United States)

Sutrisno; Widowati; Heru Tjahjana, R.

2017-01-01

In this paper, we propose a mathematical model in the form of dynamic/multi-stage optimization to solve an integrated supplier selection problem and tracking control problem of single product inventory system with product discount. The product discount will be stated as a piece-wise linear function. We use dynamic programming to solve this proposed optimization to determine the optimal supplier and the optimal product volume that will be purchased from the optimal supplier for each time period so that the inventory level tracks a reference trajectory given by decision maker with minimal total cost. We give a numerical experiment to evaluate the proposed model. From the result, the optimal supplier was determined for each time period and the inventory level follows the given reference well.

Automated Inventory Control System for Nigeria Power Holding

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-09-01

Sep 1, 2013 ... Power Holding Company of Nigeria (PHCN) currently holds in excess of millions in spare parts inventory ... equipment/utilities at all times in view of stochastic item ... line contingency and small conductor sizing lines which are ...

Forest inventory in Myanmar

Energy Technology Data Exchange (ETDEWEB)

Bo, Sit [Forest Resource Div., Forest Department (Myanmar)

1993-10-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

Forest inventory in Myanmar

International Nuclear Information System (INIS)

Sit Bo

1993-01-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

Residual life of technical systems; diagnosis, prediction and life extension

International Nuclear Information System (INIS)

Reinertsen, Rune

1996-01-01

The paper presents and discusses research related to residual life of non-repairable and repairable technical systems. Diagnosis of systems and extension of residual life of technical systems are also presented and discussed. This paper concludes that research published describing determination and extension of residual life as well as methods for diagnosis of non-repairable and repairable technical systems, is somewhat limited. Many papers have a rather pragmatic approach. The authors only describe special cases from their own plant and do not provide any explanation of a more academical nature. The other papers are mainly describing very specific applications of statistical models, leaving the more general case out of consideration. One of the main results of this paper is to point out these facts, and thereby identify the need for future research in this area

Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

International Nuclear Information System (INIS)

Wong, C.P.C.; Merrill, B.

2014-01-01

Highlights: • With the use of a system code, tritium burn-up fraction (f burn ) can be determined. • Initial tritium inventory for steady state DT machines can be estimated. • f burn of ARIES-AT, CFETR and FNSF-AT are in the range of 1–2.8%. • Respective total tritium inventories of are 7.6 kg, 6.1 kg, and 5.2 kg. - Abstract: ITER is under construction and will begin operation in 2020. This is the first 500 MW fusion class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a system code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 1–2.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively

Measurement of sexual health in the U.S.: an inventory of nationally representative surveys and surveillance systems.

Science.gov (United States)

Ivankovich, Megan B; Leichliter, Jami S; Douglas, John M

2013-01-01

To identify opportunities within nationally representative surveys and surveillance systems to measure indicators of sexual health, we reviewed and inventoried existing data systems that include variables relevant to sexual health. We searched for U.S. nationally representative surveys and surveillance systems that provided individual-level sexual health data. We assessed the methods of each data system and catalogued them by their measurement of the following domains of sexual health: knowledge, communication, attitudes, service access and utilization, sexual behaviors, relationships, and adverse health outcomes. We identified 18 U.S.-focused, nationally representative data systems: six assessing the general population, seven focused on special populations, and five addressing health outcomes. While these data systems provide a rich repository of information from which to assess national measures of sexual health, they present several limitations. Most importantly, apart from data on service utilization, routinely gathered, national data are currently focused primarily on negative aspects of sexual health (e.g., risk behaviors and adverse health outcomes) rather than more positive attributes (e.g., healthy communication and attitudes, and relationship quality). Nationally representative data systems provide opportunities to measure a broad array of domains of sexual health. However, current measurement gaps indicate the need to modify existing surveys, where feasible and appropriate, and develop new tools to include additional indicators that address positive domains of sexual health of the U.S. population across the life span. Such data can inform the development of effective policy actions, services, prevention programs, and resource allocation to advance sexual health.

Application of plutonium inventory measurement system (PIMS) and temporary canister verification system (TCVS) at RRP

International Nuclear Information System (INIS)

Noguchi, Yoshihiko; Nakamura, Hironobu; Adachi, Hideto; Iwamoto, Tomonori

2004-01-01

In U-Pu co-denitration area at Rokkasho Reprocessing Plant (RRP), Plutonium Inventory Measurement System (PIMS) and Temporary Canister Verification System (TCVS) are installed to provide efficient and effective safeguards. PIMS measures Pu quantity inside pipes and vessels installed in glove boxes by total neutron counting method. PIMS consists of total 142 neutron detector attached on the wall and top of glove boxes and neutron count rates of each detectors are related to each other to calculate Pu quantity of each process areas. In this moment, inactive calibration using Cf-source was completed. On the other hand, TCVS measures Pu quantity of canisters inside temporary storage by coincidence counting method and it will be installed before the active test. These systems have monitoring function as additional measures. This paper describes specification, performance and measurement principles of PIMS and TCVS. (author)

Solving a Novel Inventory Location Model with Stochastic Constraints and (R,s,S Inventory Control Policy

Directory of Open Access Journals (Sweden)

Guillermo Cabrera

2013-01-01

Full Text Available We solve a novel inventory-location model with a stochastic capacity constraint based on a periodic inventory control (ILM-PR policy. The ILM-PR policy implies several changes with regard to other previous models proposed in the literature, which consider continuous review as their inventory policy. One of these changes is the inclusion of the undershoot concept, which has not been considered in previous ILM models in the literature. Based on our model, we are able to design a distribution network for a two-level supply chain, addressing both warehouse location and customer assignment decisions, whilst taking into consideration several aspects of inventory planning, in particular, evaluating the impact of the inventory control review period on the network configuration and system costs. Because the model is a very hard-to solve combinatorial nonlinear optimisation problem, we implemented two heuristics to solve it, namely, Tabu Search and Particle Swarm Optimisation. These approaches were tested over small instances in which they were able to find the optimal solution in just a few seconds. Because the model is a new one, a set of medium-size instances is provided that can be useful as a benchmark in future research. The heuristics showed a good convergence rate when applied to those instances. The results confirm that decision making over the inventory control policy has effects on the distribution network design.

NWCF Evaporator Tank System 2001 Offgas Emissions Inventory; ANNUAL

International Nuclear Information System (INIS)

Boardman, R.D.; Lamb, K.M.; Matejka, L.A.; Nenni, J.A.

2002-01-01

An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5

INVENTORY DECISIONS WITH DECREASING PURCHASING COSTS

OpenAIRE

XIANGPEI HU; HUIMIN WANG; YUNZENG WANG

2012-01-01

Costs of many items drop systematically throughout their life-cycles, due to advances in technology and competition. Motivated by the management of service parts for some high-tech products, this paper studies inventory decisions for such items. In a periodic review setting with stochastic demand, we model the purchasing costs of successive periods as a stochastic and decreasing sequence. Unit selling price of the item is determined as some mark-up of the purchasing cost and, hence, will chan...

Interfacing internet of things technologies of RFID, XMPP and Twitter to reduce inaccuracies in inventory management

CSIR Research Space (South Africa)

Mathaba, S

2012-05-01

Full Text Available processes. These processes include forecasting, stock replenishment, ordering, and effective utilization of stock information. Inventory accuracy is a key problem if overlooked. Inventory systems need to have accurate inventory records of stock on hand... of book inventory in parallel with the stock on hand within specified time intervals. Stock on hand and book inventory is compared to check the inventory to be ordered and inventory on hand. Inventory management systems are able to calculate PI...

An NPV and AC Analysis of a Stochastic Inventory System with Joint Manufacturing and Remanufacturing

NARCIS (Netherlands)

E.A. van der Laan (Erwin)

2000-01-01

textabstractWhile the net present value (NPV) approach is widely accepted as the right framework for studying production and inventory control systems, average cost (AC) models are more widely used. For the well known EOQ model it can be veri_ed that (under certain conditions) the AC approach gives

Accounting of discounts, acquired by an enterprise when purchasing production inventories

Directory of Open Access Journals (Sweden)

Shishkina A.V.

2017-01-01

Full Text Available Different types of discounts for the price of a product are quite common in transactions. They are frequently used by industrial enterprises as well: they receive discounts when they purchase production inventories; they offer discounts when they sell the finished product. Industrial enterprise strive to minimize costs when purchasing raw materials necessary for manufacturing and therefore it is interested in acquiring a discount from supplier. Acquiring a discount is a fact of economic life and must be registered in financial accounts of an enterprise, however nowadays the patterns of accounting of such operations are not regulated by any special normative documents and traditionally applied accounting patterns do not contain information on the amounts of received discounts. It is happening because they comply with the current rules of accounting, according to which inventories are accounted only after deduction of the received discount (so the discount is granted in form of verbal agreement. This is a precursor to the lack of data on the received discounts in financial accounting system of an industrial enterprise, to the impossibility of creation the information base for analyzing the effectiveness of the received discounts on its basis, to the violation of the principle of completeness and continuity of registering all the economic life events in accounting. The article offers the already existing variants of financial accounting of the received discounts, analyzes its advantages and disadvantages from the point of view of compliance with the current legislative system and economic contents of discount operation. Proprietary technology of financial accounting of discounts, received by an industrial enterprise when purchasing production stock, is offered. This technology allows solving the stated methodological issues.

Activity based costing model for inventory valuation

Directory of Open Access Journals (Sweden)

Vineet Chouhan

2017-03-01

Full Text Available Activity-Based-Model (ABC is used for the purpose of significant improvement for overhead accounting systems by providing the best information required for managerial decision. This pa-per discusses implacability of ABC technique on inventory valuation as a management account-ing innovation. In order to prove the applicability of ABC for inventory control a material driven medium-sized and privately owned company from engineering (iron and steel industry is select-ed and by analysis of its production process and its material dependency and use of indirect in-ventory, an ABC model is explored for better inventory control. The case revealed that the ne-cessity of ABC in the area of inventory control is significant. The company is not only able to increase its quality of decision but also it can significantly analyze its cost of direct material cost, valuation of direct material and use its implications for better decision making.

A time-based control policy for a perishable inventory system with lost sales

OpenAIRE

Tekin, Eylem

1998-01-01

Ankara : Department of Industrial Engineering and the Institute of Engineering and Science of Bilkent Univ., 1998. Thesis (Master's) -- Bilkent University, 1998. Includes bibliographical references leaves 49-52 In this study, we propose a new time-based poiicy for continuous review inventory systems where the products have fixed fife times and unmet denicinds are iost. We cierive the exact expressions of the key operating characteristics of the rnociei. Based on these perfo...

Life in the solar system and beyond

CERN Document Server

Jones, Barrie W

2004-01-01

In Life in the Solar System and Beyond, Professor Jones has written a broad introduction to the subject, addressing important topics such as, what is life?, the origins of life and where to look for extraterrestrial life The chapters are arranged as follows Chapter 1 is a broad introduction to the cosmos, with an emphasis on where we might find life In Chapters 2 and 3 Professor Jones discusses life on Earth, the one place we know to be inhabited Chapter 4 is a brief tour of the Solar system, leading us in Chapters 5 and 6 to two promising potential habitats, Mars and Europa In Chapter 7 the author discusses the fate of life in the Solar system, which gives us extra reason to consider life further afield Chapter 8 focuses on the types of stars that might host habitable planets, and where in the Galaxy these might be concentrated Chapters 9 and 10 describe the instruments and techniques being employed to discover planets around other stars (exoplanetary systems), and those that will be employed in the near fut...

Mathematical Modeling Of Life-Support Systems

Science.gov (United States)

Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

1994-01-01

Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

Model of the impact of parameters controlling replenishment in the bs (min-max) continuous review system on the actual inventory availibility

OpenAIRE

Stanisław Krzyżaniak

2015-01-01

Background: Due to random changes in demand, inventory management is still - despite the development of alternative goods flow management concepts - an important issue both in terms of costs of maintenance and replenishment as well as the level of service measured by inventory availability levels. There are a number of replenishment systems to be used in such conditions, but they are most often formed on the basis of two basic ones: a system based on the reorder point and based on periodic in...

A mathematical model for order splitting in a multiple supplier single-item inventory system

DEFF Research Database (Denmark)

Abginehchi, Soheil; Farahani, Reza Zanjirani; Rezapour, Shabnam

2013-01-01

systems. The item acquisition lead times of suppliers are random variables. Backorder is allowed and shortage cost is charged based on not only per unit in shortage but also per time unit. Continuous review (s,Q) policy has been assumed. When the inventory level depletes to a reorder level, the total...... order is split among n suppliers. Since the suppliers have different characteristics, the quantity ordered to different suppliers may be different. The problem is to determine the reorder level and quantity ordered to each supplier so that the expected total cost per time unit, including ordering cost......, procurement cost, inventory holding cost, and shortage cost, is minimized. We also conduct extensive numerical experiments to show the advantages of our model compared with the models in the literature. According to our extensive experiments, the model developed in this paper is the best model...

Sistem kontrol inventori pemasokan barang Secara Real Time Menggunakan Vendor-Managed Inventory (VMI dan Short Message Service (SMS

Directory of Open Access Journals (Sweden)

Rinaldo Turang

2016-01-01

Full Text Available This research underlines the urgency of real-time stock replenishment control system for distributors using vendor-managed inventory. It is valuable in improving corporate performance in lowering inventory cost as well as making better customer service due to the cut made in ordering cycle. The system produces real-time information on stock available at the retailing stores. Stock replenishment can then be done by the distributor at the right time. Using Short Message Service (SMS as a one-way information channel from retailers to their distributor, the data of every transaction of the supervised item are processed by a rule-based forward-chaining inference system to determine the item’s availability in stores. Folowing steps in Rapid Application Development (RAD, the construction of this system takes place through business modeling, data modeling, process modeling of VMI system, then the application is generated and tested as a prototype. The results are: the stock replenishment control system are able to make transactional data at the stores transparent to the distributor, facilitating the continuation in stock delivery. System architecture reduces the time needed to access information about sales on supervised item by using SMS shortcut. This control system developed in stores can be operationally independent from the retailing systems. Rule-based forward-chaining inference technique processes facts on stock variations, resulting in stock replenishment notification such as normal, reserve, and depleted warning. Keywords: VMI, inventory; Stock replenishment; Rule-based reasoning; Forward-chaining system, RAD

Life cycle inventory of biodiesel and petroleum diesel for use in an urban bus. Final report

Energy Technology Data Exchange (ETDEWEB)

Sheehan, J.; Camobreco, V.; Duffield, J.; Graboski, M.; Shapouri, H.

1998-05-01

This report presents the findings from a study of the life cycle inventories for petroleum diesel and biodiesel. It presents information on raw materials extracted from the environment, energy resources consumed, and air, water, and solid waste emissions generated. Biodiesel is a renewable diesel fuel substitute. It can be made from a variety of natural oils and fats. Biodiesel is made by chemically combining any natural oil or fat with an alcohol such as methanol or ethanol. Methanol has been the most commonly used alcohol in the commercial production of biodiesel. In Europe, biodiesel is widely available in both its neat form (100% biodiesel, also known as B1OO) and in blends with petroleum diesel. European biodiesel is made predominantly from rapeseed oil (a cousin of canola oil). In the United States, initial interest in producing and using biodiesel has focused on the use of soybean oil as the primary feedstock mainly because the United States is the largest producer of soybean oil in the world. 170 figs., 148 tabs.

Inventory Control of Spare Parts for Operating Nuclear Power plants

Energy Technology Data Exchange (ETDEWEB)

Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

2006-07-01

Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea.

Inventory Control of Spare Parts for Operating Nuclear Power plants

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea

Radwaste inventories and projections: an overview

International Nuclear Information System (INIS)

Notz, K.J.

1982-07-01

The Integrated Data Base program was set up to provide fully integrated and reconciled inventories, characteristics, and projections for spent nuclear fuel and all categories of radioactive waste. Eight summary papers, six of which were presented at an ANS special session in Los Angeles in June 1982, are included in this report: data base needs and functions: national planning; integrated data base for spent fuel and radwaste: inventories; integrated data base projections; RAWSYM: radioactive waste management system; NWTS program waste projection data needs; low-level waste management data base system; waste sludge composition at the Savannah River Plant; and summary of characteristics of transuranic waste found at DOE sites

Mission impossible? The boss wants to double our inventory turns.

Science.gov (United States)

Gips, J

1998-11-01

Despite the prolific implementation of manufacturing systems, JIT principles, Kaizen events, and cycle time reduction programs over the past few years, high inventories still plague many companies. The assumption that implementing these principles and techniques will automatically result in inventory levels that satisfy management frequently proves to be false. Events like mergers, introduction of new competition, and a dropoff in business often trigger edicts to cut inventories. The cost of inventories also extends beyond the traditional accounting measurements to include hidden operating costs that everyone should want to eliminate. This article looks at the reasons for inventories and explores strategies for reducing them.

Inventory of thermal solar energy systems in the Netherlands: Period 1975-1992

International Nuclear Information System (INIS)

Warmerdam, J.M.; Stap, C.A.M.

1993-10-01

An overview is given of the number of active thermal solar energy systems that have been installed in the Netherlands during the period 1975-1992. By the end of 1992, 8,300 systems have been installed, of which 6,000 were domestic solar hot water systems. The uncertainty in these figures is 10%. Several sources were used to determine the number of systems installed. The two main sources were the files of the solar industry association 'Holland Solar' (data until 1988), and the Dutch subsidy administrator 'Senter' for data from 1988 up to and including 1992. At the end of 1992 preparations were made for the installation of approximately 3,000 domestic solar water heaters in 1993. It is recommended to carry out an inventory every three months and to compile data on investment costs. 17 figs., 7 appendices

Model of inventory replenishment in periodic review accounting for the occurrence of shortages

Directory of Open Access Journals (Sweden)

Stanisław Krzyżaniak

2014-03-01

Full Text Available Background: Despite the development of alternative concepts of goods flow management, the inventory management under conditions of random variations of demand is still an important issue, both from the point of view of inventory keeping and replenishment costs and the service level measured as the level of inventory availability. There is a number of inventory replenishment systems used in these conditions, but they are mostly developments of two basic systems: reorder point-based and periodic review-based. The paper deals with the latter system. Numerous researches indicate the need to improve the classical models describing that system, the reason being mainly the necessity to adapt the model better to the actual conditions. This allows a correct selection of parameters that control the used inventory replenishment system and - as a result - to obtain expected economic effects. Methods: This research aimed at building a model of the periodic review system to reflect the relations (observed during simulation tests between the volume of inventory shortages and the degree of accounting for so-called deferred demand, and the service level expressed as the probability of satisfying the demand in the review and the inventory replenishment cycle. The following model building and testing method has been applied: numerical simulation of inventory replenishment - detailed analysis of simulation results - construction of the model taking into account the regularities observed during the simulations - determination of principles of solving the system of relations creating the model - verification of the results obtained from the model using the results from simulation. Results: Presented are selected results of calculations based on classical formulas and using the developed model, which describe the relations between the service level and the parameters controlling the discussed inventory replenishment system. The results are compared to the simulation

Life Support Systems: Environmental Monitoring

Data.gov (United States)

National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Environmental Monitoring (EM) systems task objectives are to develop and demonstrate onboard...

Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C., E-mail: wongc@fusion.gat.com [General Atomics, San Diego, CA (United States); Merrill, B. [Idaho National Laboratory, Idaho Falls, ID (United States)

2014-10-15

Highlights: • With the use of a system code, tritium burn-up fraction (f{sub burn}) can be determined. • Initial tritium inventory for steady state DT machines can be estimated. • f{sub burn} of ARIES-AT, CFETR and FNSF-AT are in the range of 1–2.8%. • Respective total tritium inventories of are 7.6 kg, 6.1 kg, and 5.2 kg. - Abstract: ITER is under construction and will begin operation in 2020. This is the first 500 MW{sub fusion} class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a system code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 1–2.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively.

The use of remote sensing for updating extensive forest inventories

Science.gov (United States)

John F. Kelly

1990-01-01

The Forest Inventory and Analysis unit of the USDA Forest Service Southern Forest Experiment Station (SO-FIA) has the research task of devising an inventory updating system that can be used to provide reliable estimates of forest area, volume, growth, and removals at the State level. These updated inventories must be accomplished within current budgetary restraints....

The System of Inventory Forecasting in PT. XYZ by using the Method of Holt Winter Multiplicative

Science.gov (United States)

Shaleh, W.; Rasim; Wahyudin

2018-01-01

Problems at PT. XYZ currently only rely on manual bookkeeping, then the cost of production will swell and all investments invested to be less to predict sales and inventory of goods. If the inventory prediction of goods is to large, then the cost of production will swell and all investments invested to be less efficient. Vice versa, if the inventory prediction is too small it will impact on consumers, so that consumers are forced to wait for the desired product. Therefore, in this era of globalization, the development of computer technology has become a very important part in every business plan. Almost of all companies, both large and small, use computer technology. By utilizing computer technology, people can make time in solving complex business problems. Computer technology for companies has become an indispensable activity to provide enhancements to the business services they manage but systems and technologies are not limited to the distribution model and data processing but the existing system must be able to analyze the possibilities of future company capabilities. Therefore, the company must be able to forecast conditions and circumstances, either from inventory of goods, force, or profits to be obtained. To forecast it, the data of total sales from December 2014 to December 2016 will be calculated by using the method of Holt Winters, which is the method of time series prediction (Multiplicative Seasonal Method) it is seasonal data that has increased and decreased, also has 4 equations i.e. Single Smoothing, Trending Smoothing, Seasonal Smoothing and Forecasting. From the results of research conducted, error value in the form of MAPE is below 1%, so it can be concluded that forecasting with the method of Holt Winter Multiplicative.

Health-related quality of life evaluated by Pediatric Quality of Life Inventory 4.0 in pediatric leprosy patients with musculoskeletal manifestations.

Science.gov (United States)

Neder, Luciana; van Weelden, Marlon; Viola, Gabriela Ribeiro; Lourenço, Daniela Mencaroni; Len, Claudio A; Silva, Clovis A

2015-01-01

To evaluate the health-related quality of life (HRQL) in pediatric leprosy patients. A cross-sectional study included 47 leprosy patients and 45 healthy subjects. The HRQL was measured by Pediatric Quality of Life Inventory 4.0 (PedsQL 4.0), and evaluated physical, emotional, social and school domains. The leprosy patients were classified by Ridley and Jopling classification criteria and assessed according to clinical musculoskeletal manifestations, laboratory and radiographic examinations. The median of current age was similar in leprosy patients and controls [12(6-18) vs. 15(5-18)years, p = 0.384], likewise the frequencies of female gender (p = 0.835) and middle/lower Brazilian socio-economic classes (p = 1.0). The domain school activities according the child-self report was significantly lower in leprosy patients compared to controls in the age group of 13-18 years [75(45-100) vs. 90(45-100), p = 0.021]. The other domains were alike in both groups (p > 0.05). At least one musculoskeletal manifestation (arthralgia, arthritis and/or myalgia) was observed in 15% of leprosy patients and none in controls (p = 0.012). Further comparison between all leprosy patients showed that the median of the physical capacity domain [81.25(50-100) vs. 98.44(50-100), p = 0.036] and school activities domain by child-self report [60(50-85) vs. 80(45-100), p = 0.042] were significantly lower in patients with musculoskeletal manifestations compared to patients without these manifestations. No differences were evidenced between the other HRQL parameters in both groups, reported by patients and parents (p > 0.05). Reduced physical capacity and school activities domains were observed in pediatric leprosy patients with musculoskeletal manifestations. Copyright © 2015 Elsevier Editora Ltda. All rights reserved.

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

Science.gov (United States)

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

Calculation of radioactive inventory of activated parts for nuclear power unit and analysis of influence factors

International Nuclear Information System (INIS)

Liu Yang; Cai Qi; Lin Xiaoling

2011-01-01

Based on the operation characteristics of the nuclear power unit, the radioactive inventory of activated parts was calculated by ORIGEN2, and the effects of bum-up, operation mode and power change on the radioactive inventory for activated parts were analyzed. The results indicated that the radioactive inventory grew with the increasing of burn-up, and when the actual operation time was longer than the effective operation time, the increasing rate of nuclide activity approximated the burn-up increasing; Radioactive inventory of activated parts was influenced directly by the operation modes of the nuclear power unit, and under same reactor load, operation power and bum-up, the radioactive inventory for non-continuous operation mode is less than that for the continuous operation mode. Effects of operation modes on radioactive inventory reversed with half life of nuclides. Under same bum-up and longer operation time, the effect of operation power change on the radioactive inventory is not obvious, (authors)

Validation of the TIARA code to tritium inventory data

International Nuclear Information System (INIS)

Billone, M.C.

1994-03-01

The TIARA code has been developed to predict tritium inventory in Li 2 O breeder ceramic and to predict purge exit flow rate and composition. Inventory predictions are based on models for bulk diffusion, surface desorption, solubility and precipitation. Parameters for these models are determined from the results of laboratory annealing studies on unirradiated and irradiated Li 2 O. Inventory data from in-reactor purge flow tests are used for model improvement, fine-tuning of model parameters and validation. In this current work, the inventory measurement near the purge inlet from the BEATRIX-II thin-ring sample is used to fine tune the surface desorption model parameters for T > 470 degrees C, and the inventory measurement near the midplane from VOM-15H is used to fine tune the moisture solubility model parameters. predictions are then validated to the remaining inventory data from EXOTIC-2 (1 point), SIBELIUS (3 axial points), VOM-15H (2 axial points), CRITIC-1 (4 axial points), BEATRIX-II thin ring (3 axial points) and BEATRIX-II thick pellet (5 radial points). Thus. of the 20 data points, two we re used for fine tuning model parameters and 18 were used for validation. The inventory data span the range of 0.05--1.44 wppm with an average of 0.48 wppm. The data pertain to samples whose end-of-life temperatures were in the range of 490--1000 degrees C. On the average, the TIARA predictions agree quite well with the data (< 0.02 wppm difference). However, the root-mean-square deviation is 0.44 wppm, mostly due to over-predictions for the SIBELIUS samples and the higher-temperature radial samples from the BEATRIX-11 thick-pellet

Application of Greenhouse Gas Inventory to Urban Rural Planning in China

Institute of Scientific and Technical Information of China (English)

Stanley; C.; T.; YIP

2013-01-01

Greenhouse Gas (GHG) inventory analysis provides crucial scientific basis to support the preparation of urban-rural planning policies on managing climate change. This article reviews current studies on GHG inventory in China and points out the short fall in translating these inventory data into specific local policies. It examines the issue of setting up the GHG inventory based on the statutory urban-rural planning systems in China. It enables the local government to set up a platform coordinating various city policies and to serve well as the platform for local emission mitigation and removal policies. The urban-rural planning GHG inventory system needs to address the issue of spatial boundary in accounting for local emission sources and origins with respect to the boundaries of planning area, and it must directly relate to the various statutory master plan policy contents and the local municipal government functional structure. Finally it presents a case study of applying the proposed inventory as a planning tool for Jiangyin at the Jiangsu Province.

Model of the impact of parameters controlling replenishment in the bs (min-max continuous review system on the actual inventory availibility

Directory of Open Access Journals (Sweden)

Stanisław Krzyżaniak

2015-09-01

Full Text Available Background: Due to random changes in demand, inventory management is still - despite the development of alternative goods flow management concepts - an important issue both in terms of costs of maintenance and replenishment as well as the level of service measured by inventory availability levels. There are a number of replenishment systems to be used in such conditions, but they are most often formed on the basis of two basic ones: a system based on the reorder point and based on periodic inspection.  This paper refers to the former system, the BS system (min-max, in which an order is placed after reaching inventory level B (information level, reorder point for a quantity allowing to reach level S. This system is very often used in business practice. Observations conducted under realistic conditions indicate the need to improve the classical models describing the system.  This results, among other things, from the fact that the actual level of available inventory at the start of the replenishment cycle may be significantly lower than level B, resulting in lower than expected levels of customer service. Taking account of this phenomenon through model determination of the cumulative distribution function for the observed difference makes it possible to select the correct parameters to control the replenishment system in question and - therefore - to achieve the expected economic effects. Methods: The object of the study is to create a mathematical model allowing the determination of the required inventory level B taking into account the difference D between this level and the actual level of inventory at the start of the replenishment cycle.  To determine the effect of various factors such as demand distribution parameters in the adopted unit of time and the difference between level S (max and B (min, a dedicated tool (simulator in EXCEL spreadsheet for determining the distribution of frequency of value D has been developed.  Then a

The hexagon/panel system for selecting FIA plots under an annual inventory

Science.gov (United States)

Gary J. Brand; Mark D. Nelson; Daniel G. Wendt; Kevin K. Nimerfro

2000-01-01

Forest Inventory and Analysis (FIA) is changing to an annual nationwide forest inventory. This paper describes the sampling grid used to distribute FIA plots across the landscape and to allocate them to a particular measurement year. We also describe the integration of the F1A and Forest Health Monitoring (FHM) plot networks.

Trade-credit modeling for deteriorating item inventory system with ...

Indian Academy of Sciences (India)

Dipana Jyoti Mohanty

2018-03-23

Mar 23, 2018 ... inventory/supply chain management. Multifariousness of deterministic .... time within which ramp-type demand increases b percentage of partially back ... imply the diminishing marginal productivity of capital. 6. Repairing or ...

Valuation of inventories in systems with product recovery

NARCIS (Netherlands)

R.H. Teunter (Ruud); E.A. van der Laan (Erwin)

2003-01-01

textabstractValuation of inventories has different purposes, in particular accounting and decision making, and it is not necessary for a firm to use the same valuation method for both purposes. In fact, it is not uncommon to use accounting books as well as management books. In this chapter, we will

Basic School Skills Inventory-3: Validity and Reliability Study

Science.gov (United States)

Yildiz, F. Ülkü; Çagdas, Aysel; Kayili, Gökhan

2017-01-01

The purpose of this study is to perform the validity-reliability analysis of the three subtests of Basic School Skills Inventory 3--Mathematics, Classroom Behavior and Daily Life skills--and do its adaptation for four to six year-old Turkish children. The sample of the study included 595 four to six year-old Turkish children attending public and…

Optimal base-stock policy for the inventory system with periodic review, backorders and sequential lead times

DEFF Research Database (Denmark)

Johansen, Søren Glud; Thorstenson, Anders

2008-01-01

We extend well-known formulae for the optimal base stock of the inventory system with continuous review and constant lead time to the case with periodic review and stochastic, sequential lead times. Our extension uses the notion of the 'extended lead time'. The derived performance measures...

Investigation of an inventory calculation model for a solvent extraction system and the development of its computer programme - SEPHIS-J

International Nuclear Information System (INIS)

Ihara, Hitoshi; Nishimura, Hideo; Ikawa, Koji; Ido, Masaru.

1986-11-01

In order to improve the applicability of near-real-time materials accountancy (N.R.T.MA) to a reprocessing plant, it is necessary to develop an estimation method for the nuclear material inventory at a solvent extraction system under operation. For designing the solvent extraction system, such computer codes as SEPHIS, SOLVEX and TRANSIENTS had been used. Accuracy of these codes in tracing operations and predicting inventories in the extraction system had been discussed. Then, much better codes, e.g., SEPHIS Mod4 and PUBG, were developed. Unfortunately, SEPHIS Mod4 was not available in countries other than the USA and PUBG was not suitable for use with a mini-computer which would be practical as a field computer because of quite a lot of computing time needed. The authors investigated an inventory estimation model compatible with PUBG in functions and developed the corresponding computer programme, SEPHIS-J, based on the SEPHIS Mod3 code, resulting in a third of computing time compared with PUBG. They also validated the programme by calculating a static state as well as a dynamic one of the solvent extraction process and by comparing them among the programme, SEPHIS Mod3 and PUBG. Using the programme, it was shown that the inventory changes due to changes of feed flow and concentration were not so small that they might be neglected although the changes of feed flow and concentration were within measurement errors. (author)

Life cycle inventory of the production of rare earths and the subsequent production of NdFeB rare earth permanent magnets.

Science.gov (United States)

Sprecher, Benjamin; Xiao, Yanping; Walton, Allan; Speight, John; Harris, Rex; Kleijn, Rene; Visser, Geert; Kramer, Gert Jan

2014-04-01

Neodymium is one of the more critical rare earth elements with respect to current availability and is most often used in high performance magnets. In this paper, we compare the virgin production route of these magnets with two hypothetical recycling processes in terms of environmental impact. The first recycling process looks at manual dismantling of computer hard disk drives (HDDs) combined with a novel hydrogen based recycling process. The second process assumes HDDs are shredded. Our life cycle assessment is based both on up to date literature and on our own experimental data. Because the production process of neodymium oxide is generic to all rare earths, we also report the life cycle inventory data for the production of rare earth oxides separately. We conclude that recycling of neodymium, especially via manual dismantling, is preferable to primary production, with some environmental indicators showing an order of magnitude improvement. The choice of recycling technology is also important with respect to resource recovery. While manual disassembly allows in principle for all magnetic material to be recovered, shredding leads to very low recovery rates (<10%).

The RNA World as a Model System to Study the Origin of Life.

Science.gov (United States)

Pressman, Abe; Blanco, Celia; Chen, Irene A

2015-10-05

Understanding how life arose is a fundamental problem of biology. Much progress has been made by adopting a synthetic and mechanistic perspective on originating life. We present a current view of the biochemistry of the origin of life, focusing on issues surrounding the emergence of an RNA World in which RNA dominated informational and functional roles. There is cause for optimism on this difficult problem: the prebiotic chemical inventory may not have been as nightmarishly complex as previously thought; the catalytic repertoire of ribozymes continues to expand, approaching the goal of self-replicating RNA; encapsulation in protocells provides evolutionary and biophysical advantages. Nevertheless, major issues remain unsolved, such as the origin of a genetic code. Attention to this field is particularly timely given the accelerating discovery and characterization of exoplanets. Copyright © 2015 Elsevier Ltd. All rights reserved.

Developing Sustainable Life Support System Concepts

Science.gov (United States)

Thomas, Evan A.

2010-01-01

Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

The Impact of Student Life Stress on Health Related Quality of Life Among Doctor of Pharmacy Students

Science.gov (United States)

Gupchup, Gireesh V.; Borrego, Matthew E.; Konduri, Niranjan

2004-01-01

The purpose of this study was to examine the association between student-life stress and health related quality of life (HRQOL) among Doctor of Pharmacy (Pharm.D.) students. Data were collected for 166 students in the first three years of a Pharm.D. curriculum. Student-Life Stress Inventory scores were significantly negatively correlated to mental…

A comparison of production system life cycle models

Science.gov (United States)

Attri, Rajesh; Grover, Sandeep

2012-09-01

Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

Total neutron-counting plutonium inventory measurement systems (PIMS) and their potential application to near real time materials accountancy (NRTMA)

International Nuclear Information System (INIS)

Driscall, I.; Fox, G.H.; Orr, C.H.; Whitehouse, K.R.

1988-01-01

A radiometric method of determining the inventory of an operating plutonium plant is described. An array of total neutron counters distributed across the plant is used to estimate hold-up at each plant item. Corrections for the sensitivity of detectors to plutonium in adjacent plant items are achieved through a matrix approach. This paper describes our experience in design, calibration and operation of a Plutonium Inventory Measurement System (PIMS) on an oxalate precipitation plutonium finishing line. Data from a recent trial of Near-Real-Time Materials Accounting (NRTMA) using the PIMS are presented and used to illustrate its present performance and problem areas. The reader is asked to consider what role PIMS might have in future accountancy systems

Plug-in vs. wireless charging: Life cycle energy and greenhouse gas emissions for an electric bus system

International Nuclear Information System (INIS)

Bi, Zicheng; Song, Lingjun; De Kleine, Robert; Mi, Chunting Chris; Keoleian, Gregory A.

2015-01-01

Graphical abstract: In this study, plug-in and wireless charging for an all-electric bus system are compared from the life cycle energy and greenhouse gas (GHG) emissions perspectives. The comparison of life cycle GHG emissions is shown in the graph below. The major differences between the two systems, including the charger, battery and use-phase electricity consumption, are modeled separately and compared aggregately. In the base case, the wireless charging system consumes 0.3% less energy and emits 0.5% less greenhouse gases than plug-in charging system in the total life cycle. To further improve the energy and environmental performance of the wireless charging system, key parameters including grid carbon intensity and wireless charging efficiency are analyzed and discussed in this paper. - Highlights: • Compared life cycle energy and GHG emissions of wireless to plug-in charging. • Modeled a transit bus system to compare both charging methods as a case study. • Contrasted tradeoffs of infrastructure burdens with lightweighting benefits. • The wireless battery can be downsized to 27–44% of a plug-in charged battery. • Explored sensitivity of wireless charging efficiency & grid carbon intensity. - Abstract: Wireless charging, as opposed to plug-in charging, is an alternative charging method for electric vehicles (EVs) with rechargeable batteries and can be applicable to EVs with fixed routes, such as transit buses. This study adds to the current research of EV wireless charging by utilizing the Life Cycle Assessment (LCA) to provide a comprehensive framework for comparing the life cycle energy demand and greenhouse gas emissions associated with a stationary wireless charging all-electric bus system to a plug-in charging all-electric bus system. Life cycle inventory analysis of both plug-in and wireless charging hardware was conducted, and battery downsizing, vehicle lightweighting and use-phase energy consumption were modeled. A bus system in Ann Arbor

Two replenishment strategies for the lost sales inventory model: a comparison

NARCIS (Netherlands)

Donselaar, van K.H.; Kok, de A.G.; Rutten, W.G.M.M.

1996-01-01

For the lost sales inventory system we distinguish two different replenishment strategies. The simplest strategy is the classical ‘fixed reorder level’ replenishment rule: every period the inventory position in the system is raised up to a fixed quantity S. For this simple strategy we derive and

Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module D, Life cycle inventory of softwood lumber manufacturing in the Northeastern and North Central United States.

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2009-01-01

The goal of this study was to gain an understanding of the environmental impact for softwood lumber production through a gate-to-gate life-cycle inventory (LCI) of softwood sawmills in the northeastern and north central United States (NE/NC). Primary mill data were collected per Consortium on Research for Renewable Industrial Material (CORRIM) Research Guidelines (...

A logical framework for ranking landslide inventory maps

Science.gov (United States)

Santangelo, Michele; Fiorucci, Federica; Bucci, Francesco; Cardinali, Mauro; Ardizzone, Francesca; Marchesini, Ivan; Cesare Mondini, Alessandro; Reichenbach, Paola; Rossi, Mauro; Guzzetti, Fausto

2014-05-01

Landslides inventory maps are essential for quantitative landslide hazard and risk assessments, and for geomorphological and ecological studies. Landslide maps, including geomorphological, event based, multi-temporal, and seasonal inventory maps, are most commonly prepared through the visual interpretation of (i) monoscopic and stereoscopic aerial photographs, (ii) satellite images, (iii) LiDAR derived images, aided by more or less extensive field surveys. Landslide inventory maps are the basic information for a number of different scientific, technical and civil protection purposes, such as: (i) quantitative geomorphic analyses, (ii) erosion studies, (iii) deriving landslide statistics, (iv) urban development planning (v) landslide susceptibility, hazard and risk evaluation, and (vi) landslide monitoring systems. Despite several decades of activity in landslide inventory making, still no worldwide-accepted standards, best practices and protocols exist for the ranking and the production of landslide inventory maps. Standards for the preparation (and/or ranking) of landslide inventories should indicate the minimum amount of information for a landslide inventory map, given the scale, the type of images, the instrumentation available, and the available ancillary data. We recently attempted at a systematic description and evaluation of a total of 22 geomorphological inventories, 6 multi-temporal inventories, 10 event inventories, and 3 seasonal inventories, in the scale range between 1:10,000 and 1:500,000, prepared for areas in different geological and geomorphological settings. All of the analysed inventories were carried out by using image interpretation techniques, or field surveys. Firstly, a detailed characterisation was performed for each landslide inventory, mainly collecting metadata related (i) to the amount of information used for preparing the landslide inventory (i.e. images used, instrumentation, ancillary data, digitalisation method, legend, validation

An efficient model to improve the performance of platelet inventory of the blood banks

Directory of Open Access Journals (Sweden)

Annista Wijayanayake

2017-06-01

Full Text Available Platelet transfusions are vital for the prevention of fatal hemorrhage. Therefore, a stable inventory of platelets is required for an efficient and effective delivery of services in all the hospitals and medical centers. However, over the past decades, the requirement for platelets seems to be continuously increasing, while the number of potential donors is decreasing. Moreover, due to its very short life span of just five days, a large volume of platelets expires while they are on the shelves, resulting unnecessary shortages of platelets. Furthermore, it is very costly and difficult to get platelets from another blood bank in a short notice. Hence, these unexpected shortages put the life of patients at risk. This study is focused on addressing the issues discussed, by developing an efficient blood inventory management model to reduce the platelet shortages, and wastages, while reducing the related inventory costs. Currently, the blood banks are managing platelet inventory according to their own instincts, which result to shortages and wastages. As a solution, we propose a model to manage the daily supply of platelets by forecasting the daily demand. Three different algorithms were developed using lower bound, average and upper bound values and tested to find the optimal solution that best fits to manage platelet inventory. These models were tested using data for 60 days obtained from two different levels of blood banks in Sri Lanka, namely a General Hospital blood bank and a Base Hospital blood bank. In General hospitals, the demand for blood components including platelets is very high when compared to the Base hospitals. The study was able to come up with two different inventory management models for the two different types of blood banks. The model that best fits the General Hospital blood bank where the demand is high and was able to reduce the shortages by 46.74%, wastage by 89.82% and total inventory level by 39.10% and, the model that

Proposal of a framework for scale-up life cycle inventory: A case of nanofibers for lithium iron phosphate cathode applications.

Science.gov (United States)

Simon, Bálint; Bachtin, Krystyna; Kiliç, Ali; Amor, Ben; Weil, Marcel

2016-07-01

Environmental assessments are crucial for the management of the environmental impacts of a product in a rapidly developing world. The design phase creates opportunities for acting on the environmental issues of products using life cycle assessment (LCA). However, the LCA is hampered by a lack of information originating from distinct scales along the product or technology value chain. Many studies have been undertaken to handle similar problems, but these studies are case-specific and do not analyze the development options in the initial design phase. Thus, systematic studies are needed to determine the possible scaling. Knowledge from such screening studies would open the door for developing new methods that can tackle a given scaling problem. The present article proposes a scale-up procedure that aims to generate a new life cycle inventory (LCI) on a theoretical industrial scale, based on information from laboratory experiments. Three techniques are described to obtain the new LCI. Investigation of a laboratory-scale procedure is discussed to find similar industrial processes as a benchmark for describing a theoretical large-scale production process. Furthermore, LCA was performed on a model system of nanofiber electrospinning for Li-ion battery cathode applications. The LCA results support material developers in identifying promising development pathways. For example, the present study pointed out the significant impacts of dimethylformamide on suspension preparation and the power requirements of distinct electrospinning subprocesses. Nanofiber-containing battery cells had greater environmental impacts than did the reference cell, although they had better electrochemical performance, such as better wettability of the electrode, improving the electrode's electrosorption capacity, and longer expected lifetime. Furthermore, material and energy recovery throughout the production chain could decrease the environmental impacts by 40% to 70%, making the nanofiber a

Using Agent Base Models to Optimize Large Scale Network for Large System Inventories

Science.gov (United States)

Shameldin, Ramez Ahmed; Bowling, Shannon R.

2010-01-01

The aim of this paper is to use Agent Base Models (ABM) to optimize large scale network handling capabilities for large system inventories and to implement strategies for the purpose of reducing capital expenses. The models used in this paper either use computational algorithms or procedure implementations developed by Matlab to simulate agent based models in a principal programming language and mathematical theory using clusters, these clusters work as a high performance computational performance to run the program in parallel computational. In both cases, a model is defined as compilation of a set of structures and processes assumed to underlie the behavior of a network system.

Environmental emissions of SOFC and SPFC system manufacture and disposal

Energy Technology Data Exchange (ETDEWEB)

Karakoussis, V.; Leach, M.; Vorst, R. van der; Hart, D.; Lane, J.; Pearson, P.; Kilner, J.

2000-07-01

This report gives details of a study using Life Cycle Assessment (LCA) to examine the emissions and wastes produced in the manufacture of solid oxide and solid polymer fuel cells in order to identify any barrier to their commercial acceptance. The background to the study is traced, and the selection and definition of systems for studying are outlined. Life Cycle inventories for manufacture are explored focussing on material and energy inputs and emissions, and inventories and environmental burdens are considered. Potential commercial barriers for fuel cells from the environmental effects of manufacture and end-of-life are discussed, and recommendations for future work are given.

RADIOISOTOPE INVENTORY FOR TSPA-SR

International Nuclear Information System (INIS)

Leigh, C.; Rechard, R.

2001-01-01

The total system performance assessment for site recommendation (TSPA-SR), on Yucca Mountain, as a site (if suitable) for disposal of radioactive waste, consists of several models. The Waste Form Degradation Model (i.e, source term) of the TSPA-SR, in turn, consists of several components. The Inventory Component, discussed here, defines the inventory of 26 radioisotopes for three representative waste categories: (1) commercial spent nuclear fuel (CSNF), (2) US Department of Energy (DOE) spent nuclear fuel (DSNF), and (3) high-level waste (HLW). These three categories are contained and disposed of in two types of waste packages (WPs)--CSNF WPs and co-disposal WPs, with the latter containing both DSNF and HLW. Three topics are summarized in this paper: first, the transport of radioisotopes evaluated in the past; second, the development of the inventory for the two WP types; and third, the selection of the most important radioisotopes to track in TSPA-SR

A life-cycle perspective on automotive fuel cells

International Nuclear Information System (INIS)

Simons, Andrew; Bauer, Christian

2015-01-01

Highlights: • Individual inventories for each fuel cell system component, current and future. • Environmental and human health burdens from fuel cell production and end-of-life. • Comparison passenger transport in fuel cell and conventional vehicles. • Fuel cell can be more critical to overall burdens than hydrogen production. • Fuel cell developments require radical but possible changes to reduce burdens. - Abstract: The production and end-of-life (EoL) processes for current and future proton exchange membrane fuel cell (PEMFC) systems for road passenger vehicle applications were analysed and quantified in the form of life cycle inventories. The current PEMFC technology is characterised by highly sensitive operating conditions and a high system mass. For each core component of PEMFC there are a range of materials under development and the research aimed to identify those considered realistic for a 2020 future scenario and according to commercial goals of achieving higher performance, increased power density, greater stability and a marked reduction of costs. End-of-life scenarios were developed in consideration of the materials at the focus of recovery efforts. The life cycle impact assessment (LCIA) addressed the production and EoL of the fuel cell systems with inclusion of a sensitivity analysis to assess influences on the results from the key fuel cell parameters. The second part to the LCIA assessed the environmental and human health burdens from passenger transport in a fuel cell vehicle (FCV) with comparison between the 2012 and 2020 fuel cell scenarios and referenced to an internal combustion engine vehicle (ICEV) of Euro5 emission standard. It was seen that whilst the drivetrain (and therefore the fuel cell system) is a major contributor to the emissions in all the indicators shown, the hydrogen use (and therefore the efficiency of the fuel cell system and the method of hydrogen production) can have a far greater influence on the environmental

LIFE CYCLE OF INFORMATION SYSTEMS

Directory of Open Access Journals (Sweden)

Y. S. Sennik

2015-01-01

Full Text Available This work is a generalization of the theoretical propositions related to the life cycle of information systems. There was given the definition of the life cycle, specify which items you should include every step of the cycle. Describes the methodology division of the life cycle on the main stage, including methodology Rational Unified Process. The description of the fundamental standards in this area. Special attention was paid to the work of the basic life cycle models. It was carried out their comparative characteristics. On the basis of the theoretical propositions, it was concluded that the preferred model of the life cycle for the corporate network is a spiral model and the use of international standards in the life cycle saves a lot of effort, time and material resources.

SOME SIMPLE APPROACHES TO PLANNING THE INVENTORY OF SPARE COMPONENTS OF AN INDUSTRIAL SYSTEM

Directory of Open Access Journals (Sweden)

Alenka Brezavšek

2016-02-01

Full Text Available Two variants of a simple stochastic model for planning the inventory of spare components supporting maintenance of an industrial system are developed. In both variants, the aim is to determine how many spare components are needed at the beginning of a planning interval to fulfil demand for corrective replacements during this interval. Under the first variant, the acceptable probability of spare shortage during the planning interval is chosen as a decision variable while in the second variant, the adequate spare inventory level is assessed taking into account the expected number of component failures within the planning interval. Calculation of the number of spare components needed depends on the form of the probability density function of component failure times. Different statistical density functions that are useful to describe this function are presented. Advantages and disadvantages of using a particular density function in our model are discussed. The applicability of the model is given through illustrative numerical examples.

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Anon.

1981-01-01

This session is intended to apprise one of the various aspects of procedures and routines that Exxon Nuclear uses with respect to its nuclear materials physical inventory program. The presentation describes how plant physical inventories are planned and taken. The description includes the planning and preparation for taking the inventory, the clean-out procedures for converting in-process material to measurable items, the administrative procedures for establishing independent inventory teams and for inventorying each inventory area, the verification procedures used to include previously measured tamper-safed items in the inventory, and lastly, procedures used to reconcile the inventory and calculate MUF (materials unaccounted for). The purpose of the session is to enable participants to: (1) understand the planning and pre-inventorty procedures and their importance; (2) understand the need for and the required intensity of clean-out procedures; (3) understand how inventory teams are formed, and how the inventory is conducted; (4) understand the distinction between inventory previously measured tamper-safed items and other materials not so characterized; (5) understand the reconciliation procedures; and (6) calculate a MUF given the book and inventory results

Environmental sustainability assessment of hydropower plant in Europe using life cycle assessment

Science.gov (United States)

Mahmud, M. A. P.; Huda, N.; Farjana, S. H.; Lang, C.

2018-05-01

Hydropower is the oldest and most common type of renewable source of electricity available on this planet. The end of life process of hydropower plant have significant environmental impacts, which needs to be identified and minimized to ensure an environment friendly power generation. However, identifying the environmental impacts and health hazards are very little explored in the hydropower processing routes despite a significant quantity of production worldwide. This paper highlight the life-cycle environmental impact assessment of the reservoir based hydropower generation system located in alpine and non-alpine region of Europe, addressing their ecological effects by the ReCiPe and CML methods under several impact-assessment categories such as human health, ecosystems, global warming potential, acidification potential, etc. The Australasian life-cycle inventory database and SimaPro software are utilized to accumulate life-cycle inventory dataset and to evaluate the impacts. The results reveal that plants of alpine region offer superior environmental performance for couple of considered categories: global warming and photochemical oxidation, whilst in the other cases the outcomes are almost similar. Results obtained from this study will take part an important role in promoting sustainable generation of hydropower, and thus towards environment friendly energy production.

Inventory Management Models in the Supply System of Spare Parts for Military Vehicles

Directory of Open Access Journals (Sweden)

Elizabeta Kovač-Striko

2012-10-01

Full Text Available The term inventory implies various material means whichare for a certain period of time excluded from the productionprocess or transport with the aim of being used at a later pointin time, as the need might arise.The work analyses an example of the operation method ofone system according to the model of rejecting unsatisfied demands,with the task of determining the op1imal invento1y volumeand !he ordering levels in order 10 minimise the annualcosts.

DEVELOPMENT OF A SPREADSHEET BASED VENDOR MANAGED INVENTORY MODEL FOR A SINGLE ECHELON SUPPLY CHAIN: A CASE STUDY

Directory of Open Access Journals (Sweden)

Karanam Prahlada Rao

2010-11-01

Full Text Available Vendor managed inventory (VMI is a supply chain initiative where the supplier assumes the responsibility for managing inventories using advanced communication means such as online messaging and data retrieval system. A well collaborated vendor manage inventory system can improve supply chain performance by decreasing the inventory level and increasing the fill rate. This paper investigates the implementation of vendor managed inventory systems in a consumer goods industry. We consider (r, Q policy for replenishing its inventory. The objective of work is to minimize the inventory across the supply chain and maximize the service level. The major contribution of this work is to develop a spreadsheet model for VMI system, Evaluation of Total inventory cost by using spreadsheet based method and Analytical method, Quantifying inventory reduction, Estimating service efficiency level, and validating the VMI spread sheet model with randomly generated demand. In the application, VMI as an inventory control system is able to reduce the inventory cost without sacrificing the service level. The results further more show that the inventory reduction obtained from analytical method is closer to the spread sheet based approach, which reveals the VMI success. However the VMI success is impacted by the quality of buyersupplier relationships, the quality of the IT system and the intensity of information sharing, but not by the quality of information shared.

Solving Inventory Routing Problems Using Location Based Heuristics

Directory of Open Access Journals (Sweden)

Paweł Hanczar

2014-01-01

Full Text Available Inventory routing problems (IRPs occur where vendor managed inventory replenishment strategies are implemented in supply chains. These problems are characterized by the presence of both transportation and inventory considerations, either as parameters or constraints. The research presented in this paper aims at extending IRP formulation developed on the basis of location based heuristics proposed by Bramel and Simchi-Levi and continued by Hanczar. In the first phase of proposed algorithms, mixed integer programming is used to determine the partitioning of customers as well as dates and quantities of deliveries. Then, using 2-opt algorithm for solving the traveling sales-person problem the optimal routes for each partition are determined. In the main part of research the classical formulation is extended by additional constraints (visit spacing, vehicle filling rate, driver (vehicle consistency, and heterogeneous fleet of vehicles as well as the additional criteria are discussed. Then the impact of using each of proposed extensions for solution possibilities is evaluated. The results of computational tests are presented and discussed. Obtained results allow to conclude that the location based heuristics should be considered when solving real life instances of IRP. (original abstract

Integrated management data system for radioactive waste repositories (SGI3R) - development of the inventory module

International Nuclear Information System (INIS)

Silva, Fabio; Tello, Cledola Cassia O. de

2011-01-01

In Brazil, CNEN is responsible for the intermediate and final storage of radioactive waste generated in the country. The CDTN/CNEN coordinates the RBMN Project for the implementation of the National Repository for disposal radioactive waste of low- and intermediate-level. The results of this Project should be presented so that all data being easily retrievable and useful for all institutions involved, including the regulators. To achieve this goal it was developed at the Waste Management Department - SEGRE/CDTN - a management database system, called 'Integrated Management System for the Management of Repository for Radioactive Waste' (SGI3R). The System consists of relational tables, forms and reports, preserving all available information, avoiding duplication of efforts, additional costs, and it will additionally give support to improve the management of RBMN Project. This paper presents a summary of this development with emphasis on the INVENTORY Module. The data from the inventory of disused sealed sources, which are stored in CDTN, were used to test the functionality of this module and of the SGI3R. These sources were categorized according to guidelines of the IAEA, and it was also presented how they should be safely managed over time. (author)

From trust on intimacy: A new inventory for examining erikson's stages of psychosocial development.

Science.gov (United States)

Rosenthal, D A; Gurney, R M; Moore, S M

1981-12-01

A new inventory for examining the first six of Erikson's psychosocial stages is described. The self-report questionnaire, developed in a pilot study of 97 adolescents and tested in a study of 622 adolescents, has 12 items for each subscale. Measures of reliability and validity are reported. It is concluded that the Erikson Psychosocial Stage Inventory (EPSI) is a useful measure for researchers interested in development from early adolescence and in mapping changes as a function of life events.

Improvement for Amelioration Inventory Model with Weibull Distribution

Directory of Open Access Journals (Sweden)

Han-Wen Tuan

2017-01-01

Full Text Available Most inventory models dealt with deteriorated items. On the contrary, just a few papers considered inventory systems under amelioration environment. We study an amelioration inventory model with Weibull distribution. However, there are some questionable results in the amelioration paper. We will first point out those questionable results in the previous paper that did not derive the optimal solution and then provide some improvements. We will provide a rigorous analytical work for different cases dependent on the size of the shape parameter. We present a detailed numerical example for different ranges of the sharp parameter to illustrate that our solution method attains the optimal solution. We developed a new amelioration model and then provided a detailed analyzed procedure to find the optimal solution. Our findings will help researchers develop their new inventory models.

A two-echelon production-inventory model for deteriorating items with multiple buyers

NARCIS (Netherlands)

Ghiami, Yousef; Williams, Terry

2015-01-01

In a production-inventory system, the manufacturer produces the items at a rate, e.g. R, dispatches the order quantities to the customers in specific intervals and stores the excess inventory for subsequent deliveries. Therefore each inventory cycle of the manufacturer can be divided into two

Life Support Systems: Wastewater Processing and Water Management

Data.gov (United States)

National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Wastewater Processing and Water Management task: Within an integrated life support system, water...

Quality of work life in doctors working with cancer patients.

Science.gov (United States)

Bragard, I; Dupuis, G; Razavi, D; Reynaert, C; Etienne, A-M

2012-01-01

Although studies have shown that medical residents experience poor psychological health and poor organizational conditions, their quality of work life (QWL) had not been measured. A new tool, the Quality of Work Life Systemic Inventory (QWLSI), proposes to fill the gap in the definition and assessment of this concept. To confirm the convergent validity of the QWLSI, analyse Belgian medical residents' QWL with the QWLSI and discuss an intervention methodology based on the analysis of the QWLSI. One hundred and thirteen medical residents participated between 2002 and 2006. They completed the QWLSI, the Maslach Burnout Inventory and the Job Stress Survey to confirm the correspondence between these three tools. Residents' low QWL predicted high emotional exhaustion (β = 0.282; P work schedule (μ = 9; SD = 6.3), support offered to employee (μ = 7.6; SD = 6.1) and working relationship with superiors (μ = 6.9; SD = 5.3). The results confirm that the QWLSI can provide an indication of workers' health well-being and of organizational performance in different areas of work life. The problem factors found among Belgian medical residents suggest that prevention should focus on reduction of work hours, development of support and change in leadership style.

Testing the Structural Invariance of the Africultural Coping Systems Inventory Across Three Samples of African Descent Populations

Science.gov (United States)

Utsey, Shawn O.; Brown, Christa; Bolden, Mark A.

2004-01-01

Confirmatory factor analysis was used to test the factorial invariance of the Africultural Coping Systems Inventory's (ACSI) measurement model and underlying factor structure across three independent and ethnically distinct samples of African descent populations. Results indicated that factor pattern coefficients of the ACSI's underlying…

Note: Optimal base-stock policy for the inventory system with periodic review, backorders and sequential lead times

DEFF Research Database (Denmark)

Johansen, Søren Glud; Thorstenson, Anders

We show that well-known textbook formulae for determining the optimal base stock of the inventory system with continuous review and constant lead time can easily be extended to the case with periodic review and stochastic, sequential lead times. The provided performance measures and conditions...

Inventory - Dollars and sense

International Nuclear Information System (INIS)

Samson, J.R.

1992-01-01

Nuclear utilities are becoming more aware of the importance of having an inventory investment that supports two opposing philosophies. The business philosophy wants a minimal inventory investment to support a better return on invested dollars. This increase in return comes from having the dollars available to invest versus having the money tied up in inventory sitting on the shelf. The opposing viewpoint is taken by maintenance/operations organizations, which desire the maximum inventory available on-site to repair any component at any time to keep the units on-line at all times. Financial managers also want to maintain cash flow throughout operations so that plants run without interruptions. Inventory management is therefore a mixture of financial logistics with an operation perspective in mind. A small amount of common sense and accurate perception also help. The challenge to the materials/inventory manager is to optimize effectiveness of the inventory by having high material availability at the lowest possible cost

A life-cycle based decision-making framework for electricity generation system planning

Energy Technology Data Exchange (ETDEWEB)

Norrie, S.J.; Fang, L. [Ryerson Polytechnic Univ., Toronto, ON (Canada). Environmental Applied Science and Management Graduate Program

2006-07-01

This paper proposed a framework for the consideration of multiple objectives in the long-term planning of electricity generation systems. The framework was comprised of 3 components: (1) information based on life-cycle inventories of electricity generation technologies; (2) a set of alternative scenarios to be evaluated and ranked using the framework; and (3) stakeholder values for decision objectives. Scenarios were developed to represent a set of future conditions, and values were derived through the use of questionnaires. Planning for electricity generation in Ontario was selected as a test case for the DM framework. Three scenarios were presented: (1) a business as usual scenario characterized by large, central power plants; (2) a mix of central power plants, distributed generation, and advanced conventional fuel technologies; and (3) small-scale distributed and renewable energy sources and aggressive demand-side management. The life-cycle based information from the scenario evaluation was used to estimate the performance of each scenario on the established decision criteria. Results showed that scenario 3 was the closest to achieving the fundamental objectives according to the decision criteria. It was concluded that the DM framework showed that the use of holistic environmental information and preferential information for multiple objectives can be integrated into a framework that openly and consistently evaluates a set of alternative scenarios. 31 refs., 7 tabs., 4 figs.

Factors Influencing College Student Health: Development of the Psychological Distress Inventory.

Science.gov (United States)

Lustman, Patrick J.; And Others

1984-01-01

Describes the three-phase development of the Psychological Distress Inventory (PDI), an instrument designed primarily to measure life stress in college students. Standard psychometric information is presented, including reliability, validity, and some effects of response set. The PDI allows users to separately assess degree of depression, anxiety,…

Life-cycle analysis of renewable energy systems

DEFF Research Database (Denmark)

Sørensen, Bent

1994-01-01

An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants......An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants...

Inventory Revaluation for the Navy Working Capital Fund by the Naval Supply Systems Command

National Research Council Canada - National Science Library

2000-01-01

.... In the future, DoD plans to use the historical cost method of valuing inventories for presentation on the annual financial statements after developing and implementing necessary changes in inventory...

Validation of the learning transfer system inventory in the South African context (Part 1

Directory of Open Access Journals (Sweden)

W J Coetsee

2006-10-01

Full Text Available The purpose of this study was to validate the Learning Transfer System Inventory (LTSI in the South African context. The sample used in this study was a convenience sample of 240 employees working for a Banking group. Exploratory factor analysis of the LTSI was used to determine if an interpretable factor structure of latent transfer system constructs when applied in the South African context could be identified. From the results it appears that the factor structure of the LTSI, as revealed by means of the exploratory approach, appears differently in the South African context.

PC-BEIS: a personal computer version of the biogenic emissions inventory system

International Nuclear Information System (INIS)

Pierce, T.E.; Waldruff, P.S.

1991-01-01

The US Environmental Protection Agency's Biogenic Emissions Inventory System (BEIS) has been adapted for use on IBM-compatible personal computers (PCs). PC-BEIS estimates hourly emissions of isoprene, α-pinene, other monoterpenes, and unidentified hydrocarbons for any county in the contiguous United States. To run the program, users must provide hourly data on ambient temperature, relative humidity, wind speed, cloud cover, and a code that identifies the particular county. This paper provides an overview of the method used to calculate biogenic emissions, shows an example application, and gives information on how to obtain a copy of the program

Building Inventory Database on the Urban Scale Using GIS for Earthquake Risk Assessment

Science.gov (United States)

Kaplan, O.; Avdan, U.; Guney, Y.; Helvaci, C.

2016-12-01

The majority of the existing buildings are not safe against earthquakes in most of the developing countries. Before a devastating earthquake, existing buildings need to be assessed and the vulnerable ones must be determined. Determining the seismic performance of existing buildings which is usually made with collecting the attributes of existing buildings, making the analysis and the necessary queries, and producing the result maps is very hard and complicated procedure that can be simplified with Geographic Information System (GIS). The aim of this study is to produce a building inventory database using GIS for assessing the earthquake risk of existing buildings. In this paper, a building inventory database for 310 buildings, located in Eskisehir, Turkey, was produced in order to assess the earthquake risk of the buildings. The results from this study show that 26% of the buildings have high earthquake risk, 33% of the buildings have medium earthquake risk and the 41% of the buildings have low earthquake risk. The produced building inventory database can be very useful especially for governments in dealing with the problem of determining seismically vulnerable buildings in the large existing building stocks. With the help of this kind of methods, determination of the buildings, which may collapse and cause life and property loss during a possible future earthquake, will be very quick, cheap and reliable.

Towards Soil and Sediment Inventories of Black Carbon

Science.gov (United States)

Masiello, C. A.

2008-12-01

A body of literature on black carbon (BC) concentrations in soils and sediments is rapidly accumulating, but as of yet, there are no global or regional inventories of BC in either reservoir. Soil and sediment BC inventories are badly needed for a range of fields. For example, in oceanography a global sediment BC inventory is crucial in understanding the role of biomass burning in the development of stable marine carbon reservoirs, including dissolved organic carbon and sedimentary organic carbon. Again in the marine environment, BC likely strongly impacts the fate and transport of anthropogenic pollutants: regional inventories of BC in sediments will help develop better environmental remediation strategies. In terrestrial systems well-constrained natural BC soil inventories would help refine ecological, agricultural, and soil biogeochemical studies. BC is highly sorptive of nutrients including nitrogen and phosphorous. The presence of BC in ecosystems almost certainly alters N and P cycling; however, without soil BC inventories, we cannot know where BC has a significant impact. BC's nutrient sorptivity and water-holding capacity make it an important component of agricultural soils, and some researchers have proposed artificially increasing soil BC inventories to improve soil fertility. Natural soil BC concentrations in some regions are quite high, but without a baseline inventory, it is challenging to predict when agricultural amendment will significantly exceed natural conditions. And finally, because BC is one of the most stable fractions of organic carbon in soils, understanding its concentration and regional distribution will help us track the dynamics of soil organic matter response to changing environmental conditions. Developing effective regional and global BC inventories is challenging both because of data sparsity and methodological intercomparison issues. In this presentation I will describe a roadmap to generating these valuable inventories.

Mirage: Mitigating Illicit Inventorying in a RFID Enabled Retail Environment

OpenAIRE

White, Jonathan; Banerjee, Nilanjan

2010-01-01

Given its low dollar and maintenance cost, RFID is poised to become the enabling technology for inventory control and supply chain management. However, as an outcome of its low cost, RFID based inventory control is susceptible to pernicious security and privacy threats. A deleterious attack on such a system is corporate espionage, where attackers through illicit inventorying infer sales and restocking trends for products. In this paper, we first present plausible aftermaths of corporate espio...

Rebuilding our legacy inventories: identifying the good and fixing the bad

Science.gov (United States)

Dave Gilbert; Keith Tudor; Sam Otukol; Karen Jahraus

2000-01-01

Several challenges faced the Province of British Columbia in the early 1990's as we undertook a major redesign of our inventory systems: a provincial legislated demand requiring the chief forester to develop and maintain an inventory of the land and forests in British Columbia; existing inventories of the 94.5 million ha of the province; the need to meet new...

Development of parametric material, energy, and emission inventories for wafer fabrication in the semiconductor industry.

Science.gov (United States)

Murphy, Cynthia F; Kenig, George A; Allen, David T; Laurent, Jean-Philippe; Dyer, David E

2003-12-01

Currently available data suggest that most of the energy and material consumption related to the production of an integrated circuit is due to the wafer fabrication process. The complexity of wafer manufacturing, requiring hundreds of steps that vary from product to product and from facility to facility and which change every few years, has discouraged the development of material, energy, and emission inventory modules for the purpose of insertion into life cycle assessments. To address this difficulty, a flexible, process-based system for estimating material requirements, energy requirements, and emissions in wafer fabrication has been developed. The method accounts for mass and energy use atthe unit operation level. Parametric unit operation modules have been developed that can be used to predict changes in inventory as the result of changes in product design, equipment selection, or process flow. A case study of the application of the modules is given for energy consumption, but a similar methodology can be used for materials, individually or aggregated.

Learning to Control Advanced Life Support Systems

Science.gov (United States)

Subramanian, Devika

2004-01-01

Advanced life support systems have many interacting processes and limited resources. Controlling and optimizing advanced life support systems presents unique challenges. In particular, advanced life support systems are nonlinear coupled dynamical systems and it is difficult for humans to take all interactions into account to design an effective control strategy. In this project. we developed several reinforcement learning controllers that actively explore the space of possible control strategies, guided by rewards from a user specified long term objective function. We evaluated these controllers using a discrete event simulation of an advanced life support system. This simulation, called BioSim, designed by Nasa scientists David Kortenkamp and Scott Bell has multiple, interacting life support modules including crew, food production, air revitalization, water recovery, solid waste incineration and power. They are implemented in a consumer/producer relationship in which certain modules produce resources that are consumed by other modules. Stores hold resources between modules. Control of this simulation is via adjusting flows of resources between modules and into/out of stores. We developed adaptive algorithms that control the flow of resources in BioSim. Our learning algorithms discovered several ingenious strategies for maximizing mission length by controlling the air and water recycling systems as well as crop planting schedules. By exploiting non-linearities in the overall system dynamics, the learned controllers easily out- performed controllers written by human experts. In sum, we accomplished three goals. We (1) developed foundations for learning models of coupled dynamical systems by active exploration of the state space, (2) developed and tested algorithms that learn to efficiently control air and water recycling processes as well as crop scheduling in Biosim, and (3) developed an understanding of the role machine learning in designing control systems for

NASA Johnson Space Center Life Sciences Data System

Science.gov (United States)

Rahman, Hasan; Cardenas, Jeffery

1994-01-01

The Life Sciences Project Division (LSPD) at JSC, which manages human life sciences flight experiments for the NASA Life Sciences Division, augmented its Life Sciences Data System (LSDS) in support of the Spacelab Life Sciences-2 (SLS-2) mission, October 1993. The LSDS is a portable ground system supporting Shuttle, Spacelab, and Mir based life sciences experiments. The LSDS supports acquisition, processing, display, and storage of real-time experiment telemetry in a workstation environment. The system may acquire digital or analog data, storing the data in experiment packet format. Data packets from any acquisition source are archived and meta-parameters are derived through the application of mathematical and logical operators. Parameters may be displayed in text and/or graphical form, or output to analog devices. Experiment data packets may be retransmitted through the network interface and database applications may be developed to support virtually any data packet format. The user interface provides menu- and icon-driven program control and the LSDS system can be integrated with other workstations to perform a variety of functions. The generic capabilities, adaptability, and ease of use make the LSDS a cost-effective solution to many experiment data processing requirements. The same system is used for experiment systems functional and integration tests, flight crew training sessions and mission simulations. In addition, the system has provided the infrastructure for the development of the JSC Life Sciences Data Archive System scheduled for completion in December 1994.

INMACS: Operating experience of a mature, computer-assisted control system for nuclear material inventory and criticality safety

International Nuclear Information System (INIS)

Ross, A.M.

1983-01-01

This paper describes the operating experience of INMACS, the Integrated Nuclear Material Accounting and Control System used in the Recycle Fuel Fabrication Laboratories at Chalk River. Since commissioning was completed in 1977, INMACS has checked and recorded approximately 3000 inventory-related transactions involved in fabricating thermal-recycle fuels of (U,Pu)0 2 and (Th,Pu)0 2 . No changes have been necessary to INMACS programs that are used by laboratory staff when moving or processing nuclear material. The various utility programs have allowed efficient management and surveillance of the INMACS data base. Hardware failures and the nuisance of system unavailability at the laboratory terminals have been minimized by regular preventative maintenance. The original efforts in the design and rigorous testing of programs have helped INMACS to be accepted enthusiastically by old and new staff of the laboratories. The work required for nuclear material inventory control is done efficiently and in an atmosphere of safety

Information system quality in work-life balance

Directory of Open Access Journals (Sweden)

Sharmini Gopinathan