WorldWideScience

Sample records for life service

  1. NPP service life management

    International Nuclear Information System (INIS)

    Elagin, Yu.P.

    2001-01-01

    Problems of NPP service life management and service life prolongation are reviewed. Methods for the prolongation of the French NPP service life are discussed, priority directions of nuclear block service life management in regard to aging in the context of the European program of investigation into the materials aging are identified. Questions of the provision of the 60 years service life of the Mihama 1 block (Japan) and decision of the problem of the control equipment aging in Great Britain are discussed. Situation with the prolongation of licenses on the NPP operation in the USA and Spain is considered [ru

  2. Solid Propulsion Systems, Subsystems, and Components Service Life Extension

    Science.gov (United States)

    Hundley, Nedra H.; Jones, Connor

    2011-01-01

    The service life extension of solid propulsion systems, subsystems, and components will be discussed based on the service life extension of the Space Transportation System Reusable Solid Rocket Motor (RSRM) and Booster Separation Motors (BSM). The RSRM is certified for an age life of five years. In the aftermath of the Columbia accident there were a number of motors that were approaching the end of their five year service life certification. The RSRM Project initiated an assessment to determine if the service life of these motors could be extended. With the advent of the Constellation Program, a flight test was proposed that would utilize one of the RSRMs which had been returned from the launch site due to the expiration of its five year service life certification and twelve surplus Chemical Systems Division BSMs which had exceeded their eight year service life. The RSRM age life tracking philosophy which establishes when the clock starts for age life tracking will be described. The role of the following activities in service life extension will be discussed: subscale testing, accelerated aging, dissecting full scale aged hardware, static testing full scale aged motors, data mining industry data, and using the fleet leader approach. The service life certification and extension of the BSMs will also be presented.

  3. Indicators for functional service life of building structures

    NARCIS (Netherlands)

    Blok, R.; Teuffel, P.

    2014-01-01

    The Estimated Service Life, ESL, is of a major influence in many building assessments. The comparison and optimization of design alternatives depend on the accuracy of this ESL. More and more the Functional Service Life rather than the Technical Service Life is decisive in how long a building can be

  4. Interdependence of life insurance service quality and premium

    Directory of Open Access Journals (Sweden)

    Dragan Benazić

    2006-12-01

    Full Text Available Insurance companies in Croatia feel the need to find new sources of competitive advantage on the Croatian life insurance market amid increasing competition and a poorly profiled offer of life insurance services. Lately, both marketing literature and practice seem to point to the shaping of a relationship between service quality and price as a possible solution to improving the position of insurance companies on the Croatian market. In providing life insurance services, the insurance companies should focus on the quality elements that offer certain benefits a client is willing to pay for. Changes in individual quality features have been evaluated differently by clients. Such differences in their evaluation of changes in the individual elements of service quality also reflect the willingness of clients to pay a suitable increase on their insurance premium. Improvements in the service quality features that are subjectively evaluated as important should lead to the client’s acceptance of a higher life insurance premium. The paper considers the interdependence between the quality of life insurance services and the premium from the aspect of the client’s willingness to pay a higher life insurance premium for a higher service quality.

  5. Service life prediction and cementitious composites

    DEFF Research Database (Denmark)

    Stoklund Larsen, E.

    The present Ph.D.thesis describes and discusses the applicability of a systematic methodology recommended by CIB W80/RILEM-PSL for sevice life prediction. The report describes the most important inherent and environmental factors affecting the service life of structures of cementitious composites....... On the basis of this discription of factors and experience from a test programme described in SBI Report 222, Service life prediction and fibre reinforced cementitious composites, the applicabillity of the CIB/RILEM methodology is discussed....

  6. Software life after in-service

    International Nuclear Information System (INIS)

    Tseng, M.; Eng, P.

    1993-01-01

    Software engineers and designers tend to conclude a software project at the in-service milestone of the software life cycle. But the reality is that the 'life after in-service' is significantly longer than other phases of the life cycle, typically 20 years or more depending on the maintainability of the hardware platform and the designed life of the plant. During this period, the software asset (as with other physical assets in the plant) continues to be upgraded to correct deficiencies, meet new requirements, cope with obsolescence of equipment and so on. The software life cycle ends with a migration of the software to a different platform. It is typical in a software development project to put a great deal of emphasis on design methodologies, techniques, tools, development environment, standard procedures, and project management to ensure quality product is delivered on schedule and within budget. More often than not, a disproportion of emphasis is placed on the issues and needs of the in-service phase. Once the software is in-service, the designers move on to other projects, while the maintenance and support staff must manage the software. This paper examines the issues in three steps. First it presents a view of software from maintenance and support staff perspectives, including complexity of software, suitability of documentation, configuration management, training, difficulties and risks associated with making changes, required skills and knowledge. Second, it identifies the concerns raised from these viewpoints, including costs of maintaining the software, ability to meet additional requirements, availability of support tools, length of time required to engineer and install changes, and a strategy for the migration of software asset. Finally it discusses some approaches to deal with the concerns. (Author) 5 refs., fig

  7. Quality of services and quality of life from service providers' perspectives: analysis with focus groups.

    Science.gov (United States)

    Jenaro, C; Vega, V; Flores, N; Cruz, M

    2013-06-01

    Concepts such as support, quality of life and quality of services are customary in services for people with intellectual disabilities. The identification of the different ways of conceiving, prioritising and implementing these concepts by service providers can help to drive changes to achieve better personal outcomes for this population. The current study aims to identify service providers' perceptions regarding the quality of life of their clients and the quality of services they provide. It also aims to identify similarities and differences of appraisals among professionals, and to identify associations between supports, quality of life and quality of services. Data were collected from 22 service providers who attended three focus groups (professionals, direct support staff, and managers) from whom 424 comments were analysed. Service providers were asked about the required support for users, the meaning of quality of life for those users, and about features that should characterise quality services. Thematic analysis was employed and transcripts of the sessions were coded according to the dimensions of models on supports, quality of life and quality of services. Chi-squared tests were utilised to test for potential differences among groups. Each professional group has its own priorities concerning required supports. Among the organisation different and potentially conflicting perceptions regarding the meaning of experiencing quality of life coexist. Concerning quality of services, only managers mentioned personal outcomes. Finally, institutionalisation has a negative impact on supports, quality of life and quality of services. It is necessary to move beyond a shared awareness of the negative impact of institutionalisation towards the transformation of services in search of personal quality outcomes. © 2012 The Authors. Journal of Intellectual Disability Research © 2012 John Wiley & Sons Ltd, MENCAP & IASSID.

  8. The Service Life Evaluation for Concrete Structure of NPP

    International Nuclear Information System (INIS)

    Lee, Choon Min; Kim, Seong Soo; Bae, Sung Hwan; Sik, Yoon Eui

    2014-01-01

    Prolonged exposure to the marine environment degrades the durability of concrete and shortens the service life of concrete due to degradation factors such as chloride, carbonation, freezing and thawing, sulfate. Therefore, many country's organizations like the Korea Concrete Institute (KCI), the American Concrete Institute (ACI), the International Federation for Structural Concrete (FIB), the American Society for Testing and Material (ASTM) which recognized the seriousness of this deterioration proposed equation models to evaluate the service life for the concrete structures. As a result, this paper is to especially consider the service life evaluation using these equation models for concrete structure of NPP in Korea compared with 60 years as a design service life. The concrete durability evaluation for Shin-Hanul NPP units 1 and 2 is carried out by using typically proposed assessment models in domestic and foreign standard. It is confirmed that the service life of concrete durability for each of deterioration factors is significantly higher than 60 years as a design service life. As a result, the study of combined deterioration for the concrete structures of NPP in future is positively necessary and maintenance control through regular monitoring should be conducted to secure safety margin basis

  9. Through-life engineering services motivation, theory, and practice

    CERN Document Server

    Roy, Rajkumar

    2015-01-01

    Demonstrating the latest research and analysis in the area of through-life engineering services (TES), this book utilizes case studies and expert analysis from an international array of practitioners and researchers – who together represent multiple manufacturing sectors: aerospace, railway and automotive – to maximize reader insights into the field of through-life engineering services. As part of the EPSRC Centre in Through-life Engineering Services program to support the academic and industrial community, this book presents an overview of non-destructive testing techniques and applications and provides the reader with the information needed to assess degradation and possible automation of through-life engineering service activities . The latest developments in maintenance-repair-overhaul (MRO) are presented with emphasis on cleaning technologies, repair and overhaul approaches and planning and digital assistance. The impact of these technologies on sustainable enterprises is also analyzed. This book wil...

  10. Service life prediction and fibre reinforced cementitious composites

    DEFF Research Database (Denmark)

    Stoklund Larsen, E.

    The present Ph.D.thesis addresses the service life concept on the fibre reinforced cementitious composites. The advantages and problems of adding fibre to a cementitious matrix and the influence on service life are described. In SBI Report 221, Service life prediction and cementitious somposites......, the factors affecting the pure cementitious composite are described. Different sizes and types of fibre reinforced crmentitious composites have been chosen to illustrate different ageing and deterioration mechanisms. Some ageing mechanisms can be accelerated and others cannot which is demonstrated in a test...... programme. Moisture, micro structural and mechanical properties were measured before, during and after ageing, with the purpose of giving a detailed "picture" of the materials during ageing....

  11. Measuring service life and evaluating the quality of solid tires

    Directory of Open Access Journals (Sweden)

    Charoenyut Dechwayukul

    2010-08-01

    Full Text Available The objective of this research is to propose procedures for measuring service life and evaluating the quality of locallymade and used solid tires in Thailand. The solid tires were stressed and rotated until blowout on a drum-like test apparatuswhich is designed, constructed by the authors and equipped with laboratory instrumentation. Solid tires from five differentmanufacturers were selected for testing. We measured service life, length of time to tire failure, at three different loadingamplitudes and three different speeds on the testing drum. The service life of all specimens was studied and compared todetermine the possibility of using service life to evaluate the quality of a solid tire.

  12. Reinforcement Corrosion: Numerical Simulation and Service Life Prediction

    DEFF Research Database (Denmark)

    Michel, Alexander

    defects and b) define the end of service life once reinforcement corrosion is initiated neglecting corrosion processes during the propagation stage. The goal of this work was to develop a framework for the service life prediction of reinforced concrete covering initiation and propagation of chloride......Modelling of deterioration processes in concrete structures plays an increasing role in the design of reinforced concrete structures. Large sums are spent every year to ensure the durability of concrete structures, especially towards reinforcement corrosion. Improved durability provides increased...... structural reliability, economical improvements in form of less need for maintenance and repair as well as increased sustainability due to an increased energy and resource efficiency. Several service life prediction models dealing with reinforcement corrosion in concrete structurescan be found...

  13. Forecasts on service life by fracture mechanics methods

    International Nuclear Information System (INIS)

    Munz, D.

    1985-01-01

    The service life of many component parts can frequently be divided into the stages up to the formation of a crack and of crack propagation. This holds good of fatigue crack, stress corrosion crack, and also in many cases of creep. But often the crack propagation stage is the only one of interest for service life forecasts if cracks must be reckoned with already on putting parts into service. Cracks in welding constructions are typical examples. Crack- and -fracture mechanics deal with the laws underlying crack propagation and provide quantitative information on crack propagation behaviour. (orig./DG) [de

  14. End-of-Life Inventory Decisions of Service Parts

    NARCIS (Netherlands)

    M. Pourakbar (Morteza)

    2011-01-01

    textabstractWith the spurt of technology and innovation the life cycles of parts and products have become shorter and service parts enter their final phases earlier. Final phase of a typical service part starts once the part production is ceased and ends when the last service or warranty contract

  15. Reactor coolant pump service life evaluation for current life cycle optimization and license renewal

    International Nuclear Information System (INIS)

    Doroshuk, B.W.; Berto, D.S.; Robles, M.

    1990-01-01

    This paper reports that as part of the plant life cycle management and license renewal program, Baltimore Gas and Electric Company (BG and E) has completed a service life evaluation of their reactor coolant pumps, funded jointly by EPRI and performed by ABB Combustion Engineering Nuclear Power. Two of the goals of the BG and E plant life cycle management and license renewal program, and of this current evaluation, are to identify actions which would optimize current plant operation, and ensure that license renewal remains a viable option. The reactor coolant pumps (RCPs) at BG and E's Calvert Cliffs Units 1 and 2 are Byron Jackson pumps with a diffuser and a single suction. This pump design is also used in many other nuclear plants. The RCP service life evaluation assessed the effect of all plausible age-related degradation mechanisms (ARDMs) on the RCP components. Cyclic fatigue and thermal embrittlement were two ARDMs identified as having a high potential to limit the service life of the pump case. The pump case is a primary pressure boundary component. Hence, ensuring its continued structural integrity is important

  16. Identifying profiles of service users in housing services and exploring their quality of life and care needs

    NARCIS (Netherlands)

    Bitter, N.A.; Roeg, D.P.K.; Van Nieuwenhuizen, Ch.; Van Weeghel, J.

    2016-01-01

    Background Housing services aim to support people with mental illness in their daily life and recovery. As the level of recovery differs between service users, the quality of life and care needs also might vary. However, the type and amount of care and support that service users receive do not

  17. Analytical evaluation of the roller bearing service life

    Directory of Open Access Journals (Sweden)

    Antsupov Aleksey

    2017-01-01

    Full Text Available An analytical method has been developed for the design evaluation of the service life of roller bearings by the criterion of contact endurance of elements that does not require carrying out the experimental studies. It is based on the kinetic approach to the description of the solids destruction process and the theory of parametric reliability of machine parts. In contradistinction to the standard empirical dependence, which is currently used, the method allows one to take into account the effect of the material properties, and basic design and operational parameters on the service life. The results of the theoretical studies of the service life of roller bearing No. 212 (DIN 5412 T1 are presented for the quantitative assessment of this effect. They showed that the temperature-force loading conditions or material properties that were not taken into account might result in the prediction error of 1.5 or more times.

  18. Cultural services remediated in Second Life

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2008-01-01

    In 2007, the Danish Public Libraries conducted an experiment in establishing a library in the virtual world Second Life. The Info Island DK provided the framework for a number of online library services and cultural events. This study, based on interviews with most of the active participants...... in the project, discusses the experiences in remediating conventional library services into the new medium and in understanding and redefining the role of the librarian in an online virtual world....

  19. Enhanced design, operation and maintenance practices for a longer plant service life

    International Nuclear Information System (INIS)

    Raimondo, E.; Courcoux, A.

    2004-01-01

    Plant service life problems have been under detailed investigation in France and the experience acquired by our company over the past 25 years in the design, construction and maintenance of Pressurized Water Reactors has contributed to develop skills, equipment and capabilities available for efficient plant aging management and component service life extension. The service life of a nuclear power plant is deeply dependant of the provisions made during the design stage, directly linked to good operating conditions and adequate maintenance practices. This paper presents the importance of these three steps (design, operation and maintenance) for plant service life concern. (author)

  20. Identifying profiles of service users in housing services and exploring their quality of life and care needs.

    Science.gov (United States)

    Bitter, Neis A; Roeg, Diana P K; van Nieuwenhuizen, Chijs; van Weeghel, Jaap

    2016-11-23

    Housing services aim to support people with mental illness in their daily life and recovery. As the level of recovery differs between service users, the quality of life and care needs also might vary. However, the type and amount of care and support that service users receive do not always match their recovery. In order to improve the quality of care, this study aims to explore whether subgroups of service users exist based on three dimensions of recovery and to examine and compare the quality of life and care needs of the persons in these subgroups. Latent class analysis was performed with data from 263 service users of housing services in the Netherlands. Classes were based on three variables: personal recovery (Mental Health Recovery Measure), social recovery (Social Functioning Scale), and clinical recovery (Brief Symptom Inventory). Subsequently, the quality of life (MANSA) and care needs (CANSAS) of the different classes were analysed by the use of descriptive and inferential statistics. Three classes could be distinguished. Class 1 (45%) comprised of people who score the highest of the three classes in terms of personal and social recovery and who experience the least number of symptoms. People in class 2 (44%) and class 3 (11%) score significantly lower on personal and social recovery, and they experience significantly more symptoms compared to class 1. The distinction between class 2 and 3 can be made on the significantly higher number of symptoms in class 3. All three classes differ significantly on quality of life and unmet needs. The quality of life of service users of housing services needs improvement, as even persons in the best-recovered subgroup have a lower quality of life than the average population. Workers of housing services need to be aware of the recovery of a client and what his or her individual needs and goals are. Furthermore, better care (allocation) concerning mental and physical health and rehabilitation is needed. Care should be

  1. Approaches for Modelling the Residual Service Life of Marine Concrete Structures

    Directory of Open Access Journals (Sweden)

    Amir Rahimi

    2014-01-01

    Full Text Available This paper deals with the service life design of existing reinforced concrete structures in a marine environment. The general procedure of condition assessment for estimating the residual service life of structures before a repair measure is illustrated. For assessment of the residual service life of structures which have undergone a repair measure a simplified mathematical model of chloride diffusion in a 2-layer system is presented. Preliminary probabilistic calculations demonstrate the effect of various conditions on the residual service life. First studies of the chloride diffusion in a 2-layer system have been conducted using the finite element method. Results of a long-term exposure test are presented to illustrate the performance of two different repair materials. The distribution of residual chlorides after application of a repair material is being studied in laboratory investigations. The residual chlorides migrate from the concrete layer into the new layer immediately after the repair material has been applied to the concrete member. The content and gradient of residual chlorides, along with the thickness and the chloride ingress resistance of both the remaining and the new layer of cover, will determine the residual service life of the repaired structures.

  2. Service Life Of Main Piping Component Due To Low Thermal Stresses.Fatigue

    International Nuclear Information System (INIS)

    Miroshnik, R.; Jeager, A.; Ben Haim, H.

    1998-01-01

    The paper deals with estimating the service life of the power station Main piping component and describing the repair process for extending of its service life. After a long period of service, several circular fatigue cracks have been discovered at the bottom of the Main piping component chamber. Finite element analyses of transient thermal stresses, caused by power station startup, are carried out in the paper. The calculation results show good agreement between the theoretical locations of the maximum stresses and the actual locations of the cracks. There is a good agreement between theoretical evaluation and actual service life, as well. The possibility of machining out the cracks in order to prevent their growing is examined here. The machining enables us to extend the power station component's life service

  3. Advances in through-life engineering services

    CERN Document Server

    Roy, Rajkumar; Shaw, Andy

    2017-01-01

    This edited book offers further advances, new perspectives, and developments from world leaders in the field of through-life engineering services (TES). It builds up on the earlier book by the same authors entitled: “Through-life Engineering Services: Motivation, Theory and Practice.” This compendium introduces and discusses further, the developments in workshop-based and 'in situ' maintenance and support of high-value engineering products, as well as the application of drone technology for autonomous and self-healing product support. The links between ‘integrated planning’ and planned obsolescence, risk and cost modelling are also examined. The role of data, information, and knowledge management relative to component and system degradation and failure is also presented. This is supported by consideration of the effects upon the maintenance and support decision by the presence of 'No Fault Found' error signals within system data. Further to this the role of diagnostics and prognostics is also discusse...

  4. Quality of Services and Quality of Life from Service Providers' Perspectives: Analysis with Focus Groups

    Science.gov (United States)

    Jenaro, C.; Vega, V.; Flores, N.; Cruz, M.

    2013-01-01

    Background: Concepts such as support, quality of life and quality of services are customary in services for people with intellectual disabilities. The identification of the different ways of conceiving, prioritising and implementing these concepts by service providers can help to drive changes to achieve better personal outcomes for this…

  5. Service life of 1-W, 0.985-μm solitary heterolasers

    International Nuclear Information System (INIS)

    Kochetkov, A A; Konyaev, V P

    2001-01-01

    The service life of solitary heterolasers at a temperature of 50 0 C (P = 1W, λ = 0.98 - 0.99 μm) is studied. The maximum service life of heterolasers under such working conditions is 60000 hours for an average pumping current 1.5 A. (lasers and amplifiers)

  6. Serviceability modeling : predicting and extending the useful service life of FRT-plywood roof sheathing

    Science.gov (United States)

    Jerrold E. Winandy

    2000-01-01

    One of the most, if not the most, efficient methods of extending our existing forest resource is to prolong the service life of wood currently in-service by using those existing structures to meet our future needs (Hamilton and Winandy 1998). It is currently estimated that over 7 x 109 m3 (3 trillion bd. ft) of wood is currently in service within the United States of...

  7. Service life evaluation of non-metallic containment seals

    International Nuclear Information System (INIS)

    Pringle, T.G.

    1994-01-01

    A Service Life Evaluation Program (SLEP) was successfully completed for expansion joint seals used in the pressure relief duct of Pickering NGS, an eight unit CANDU station. These seals are part of the containment boundary, are difficult to replace and then only during station outages which are scheduled at ten year intervals. The SLEP, consisting of an accelerated aging program and a qualification test, was undertaken to determine the service life of the seals such that they would be capable of remaining functional following a combination of service life, a design basis accident and a subsequent seismic event. The Arrhenius model of aging was used for the accelerated aging program. Samples of seal material were subjected to oven aging at five temperatures, 150, 160, 170, 180 and 190 deg C. Tensile properties and hardness were measured at various aging times and Arrhenius plots constructed. Based on changes in elongation, activation energies of 1.2 eV and 1.1 eV were calculated for the reinforcing fabric and the silicone cover rubber, respectively. Hardness measurements were also taken but as expected, no precise quantitative aging relationship could be determined from material hardness. For the qualification test a representative length of seal was installed and field-spliced in a test frame built to simulate the installed configuration of the seal. It then underwent accelerated aging equivalent to the service life, followed by LOCA irradiation exposure to LOCA conditions of humidity, temperature and pressure and a design-basis seismic event. Finally, a pressure test to approximately five times design pressure was successfully performed to demonstrate the remaining margin of safety. Periodic air leakage tests indicated no deterioration in sealing performance and no physical deterioration was apparent. (author). 11 refs., 2 tabs., 8 figs

  8. Managing rail service life

    Directory of Open Access Journals (Sweden)

    Z. Popović

    2014-10-01

    Full Text Available The service life of rails depends especially on the operational loads and speeds on the railway lines, as well as on the rail maintenance policy. There are multiple aspects of rail maintenance optimization. The following article considers optimisation of rail maintenance activities relating to rail head surface condition in order to reduce corrective work on track geometry, as well as to minimize the overall costs for track maintenance. The objects of this research are issues and challenges related to rail and track maintenance in curves on modern conventional railway lines for mixed traffic.

  9. Service life and sustainable design methods: a case study

    CSIR Research Space (South Africa)

    Mc Duling, J

    2008-05-01

    Full Text Available The design life of hospitals normally varies between 50 to 60 years. This paper presents a case study of a major academic hospital that reached the end of its service life only 30 years after commissioning due to a combination of unsustainable...

  10. Service life prediction of exterior plastics vision for the future

    CERN Document Server

    Martin, Jon; Chapin, J

    2015-01-01

    This book defines the current state-of-the-art for predicting the lifetime of plastics exposed to weather and outlines future research needed to advance this important field of study. Coverage includes progress in developing new science and test methods to determine how materials respond to weather exposure. This book is ideal for researchers and professionals working in the field of service life prediction. This book also: Examines numerous consensus standards that affect commercial products allowing readers to see the future of standards related to service life prediction Provides the scientific foundation for the latest commercially viable instruments Presents groundbreaking research, including the blueprint of a new test method that will significantly shorten the service life prediction process time Covers two of the latest verified predictive models, which demonstrate realized-potential to transform the field

  11. Laser shock peening of steam turbine blade for enhanced service life

    Indian Academy of Sciences (India)

    2014-02-13

    Feb 13, 2014 ... Fretting-fatigue is an important factor influencing service life of turbine blades. The present paper describes laser shock peening of potential crack nucleation site in the root region of steam turbine blade for its enhanced service life. The experimental study, performed with an in-house developed 2.5 J/7 ns ...

  12. Probabilistic Design and Management of Sustainable Concrete Infrastructure Using Multi-Physics Service Life Models

    DEFF Research Database (Denmark)

    Lepech, Michael; Geiker, Mette; Michel, Alexander

    This paper looks to address the grand challenge of integrating construction materials engineering research within a multi-scale, inter-disciplinary research and management framework for sustainable concrete infrastructure. The ultimate goal is to drive sustainability-focused innovation and adoption...... cycles in the broader architecture, engineering, construction (AEC) industry. Specifically, a probabilistic design framework for sustainable concrete infrastructure and a multi-physics service life model for reinforced concrete are presented as important points of integration for innovation between...... design, consists of concrete service life models and life cycle assessment (LCA) models. Both types of models (service life and LCA) are formulated stochastically so that the service life and time(s) to repair, as well as total sustainability impact, are described by a probability distribution. A central...

  13. Actual service life prediction of building components

    DEFF Research Database (Denmark)

    Aagaard, Niels-Jørgen; Brandt, Erik; Hansen, Ernst Jan de Place

    2014-01-01

    In recent years, sustainability and life cycle cost in the construction industry have been given great attention in many countries due to the heavy climatic and environmental impact from this sector. In Denmark, a sustainability certification scheme for buildings has been developed including....... Finally, it is discussed how to adjust the model for practical purposes, and a scheme for actual service life for selected building components important for analysis of sustainability is linked. The schemes are now being implemented as basis for sustainability certification of new buildings in Denmark....

  14. Student-Life Stress in Education and Health Service Majors

    Science.gov (United States)

    Zascavage, Victoria; Winterman, Kathleen G.; Buot, Max; Wies, Jennifer R.; Lyzinski, Natalie

    2012-01-01

    In order to better understand the effects of student-life stress on Education and Health Service majors (n = 195) at a private, religious, Midwestern university in the USA, we assessed student perception of overall stress level and physical stress level using the Student-life Stress Inventory. The targeted sample consisted of students with…

  15. 9. Nuclear power plant service life prolongation

    International Nuclear Information System (INIS)

    Evropin, S.V.

    1998-01-01

    The problem of prolongation of nuclear power plant service life duration is discussed. A schematic diagram of the program developed in the course of activities dealing with NPP service time prolongation is shown and analyzed in details. It is shown that the basic moment when determining the strategy for NPP service time prolongation is the positive confirmation of the agreement between the NPP safety provisions and modern safety requirements. The other very important aspect of the problem is engineering substantiation of the measures assuring the reactor operation prolongation. The conclusion is made that available methods of recovering reactor materials properties, main components repair and replacement, the modern techniques for nondestructive testing of metals and NPP pipelines, as well as the developed approaches to reactor facility safety improvements make the prolongation of the Russian NPP service lifetimes possible from engineering viewpoint and economically desirable

  16. Evaluation of HEPA filter service life

    International Nuclear Information System (INIS)

    Fretthold, J.K.; Stithem, A.R.

    1997-01-01

    Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system

  17. Tools for in service monitoring and testing of riser to prevent failure and extend service life

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Haakon; Bondevik, Jon Olav; Skjerve, Haavard; Tveit, Oeyvind [SeaFlex AS, Asker (Norway)

    2005-07-01

    Exploration and development of new oil and gas fields is heavily dependant on use of flexible pipes and many field developments would not have been possible without them. The number of flexible risers in service is constantly increasing since relatively few offshore projects have reached the estimated operational life and the operational lifetime of several fields in-service has been extended due to new and improved technology. Many risers have been in service over a large number of years. Some risers have been operated under demanding conditions such as severe dynamic loads, high pressure and temperatures. One may in some cases find that risers actually have shorter service life than estimated in the design phase due to the severe operational conditions. In order to extend the use of the riser, some risers may have to be modified and re-terminated and prepared for a new and less demanding application. In order to operate risers safely, it is important to re-assess the fatigue life in order to prevent potential riser failure. The operator should implement methods and tools for in-service monitoring and testing. This paper addresses efficient and reliable methods and tools for monitoring of critical operational parameters as well as in-service riser testing. A brief description of structural failure modes will also be given in order to understand how to interpret test results in view of potential failure modes. (author)

  18. Impacts of Global Warming and Sea Level Rise on Service Life of Chloride-Exposed Concrete Structures

    Directory of Open Access Journals (Sweden)

    Xiao-Jian Gao

    2017-03-01

    Full Text Available Global warming will increase the rate of chloride ingress and the rate of steel corrosion of concrete structures. Furthermore, in coastal (atmospheric marine zones, sea level rise will reduce the distance of concrete structures from the coast and increase the surface chloride content. This study proposes a probabilistic model for analyzing the effects of global warming and sea level rise on the service life of coastal concrete structures. First, in the corrosion initiation stage, an improved chloride diffusion model is proposed to determine chloride concentration. The Monte Carlo method is employed to calculate the service life in the corrosion initiation stage; Second, in the corrosion propagation stage, a numerical model is proposed to calculate the rate of corrosion, probability of corrosion cracking, and service life. Third, overall service life is determined as the sum of service life in the corrosion initiation and corrosion propagation stages. After considering the impacts of global warming and sea level rise, the analysis results show that for concrete structures having a service life of 50 years, the service life decreases by about 5%.

  19. Life assessment of gas turbine blades after long term service

    Energy Technology Data Exchange (ETDEWEB)

    Auerkari, Pertti; Salonen, Jorma [VTT, Espoo (Finland); Maekinen, Sari [Helsingin Energia, Helsinki (Finland); Karvonen, Ikka; Tanttari, Heikki [Lappeenrannan Laempoevoima, Lappeenranta (Finland); Kangas, Pekka [Neste Oil, Kilpilahti (Finland); Scholz, Alfred [Technische Univ. Darmstadt (Germany); Vacchieri, Erica [Ansaldo Richerche, Genoa (Italy)

    2010-07-01

    Turbine blade samples from three land based gas turbines have been subjected to systematic condition and life assessment after long term service (88000 - 109000 equivalent operating hours, eoh), when approaching the nominal or suggested life limits. The blades represent different machine types, materials and design generations, and uncooled blading outside the hottest front end of the turbine, i.e. blades with relatively large size and considerable expected life. For a reasonable assessment, a range of damage mechanisms need to be addressed and evaluated for the impact in the residual life. The results suggested significant additional safe life for all three blade sets. In some cases this could warrant yet another life cycle comparable to that of new blades, even after approaching the nominal end of life in terms of recommended equivalent operating hours. This is thought to be partly because of base load combined cycle operation and natural gas fuel, or modest operational loading if the design also accounted for more intensive cycling operation and more corrosive oil firing. In any case, long term life extension is only appropriate if not intervened by events of overloading, overheating or other sudden events such as foreign object damage (FOD), and if supported by the regular inspection and maintenance program to control in-service damage. Condition based assessment therefore remains an important part of the blade life management after the decision of accepted life extension. (orig.)

  20. Reliability and service life of wood structures and buildings

    Directory of Open Access Journals (Sweden)

    Zdeňka Havířová

    2005-01-01

    Full Text Available Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1, energy savings and thermal protection (ER6 and hygiene, health and environment protection (ER3. To ensure the reliability of constructions and buildings for the period of their supposed service life a more profound analysis of constructions is necessary from the aspect of a global thermal/technical evaluation.

  1. BioCatalogue: a universal catalogue of web services for the life sciences.

    Science.gov (United States)

    Bhagat, Jiten; Tanoh, Franck; Nzuobontane, Eric; Laurent, Thomas; Orlowski, Jerzy; Roos, Marco; Wolstencroft, Katy; Aleksejevs, Sergejs; Stevens, Robert; Pettifer, Steve; Lopez, Rodrigo; Goble, Carole A

    2010-07-01

    The use of Web Services to enable programmatic access to on-line bioinformatics is becoming increasingly important in the Life Sciences. However, their number, distribution and the variable quality of their documentation can make their discovery and subsequent use difficult. A Web Services registry with information on available services will help to bring together service providers and their users. The BioCatalogue (http://www.biocatalogue.org/) provides a common interface for registering, browsing and annotating Web Services to the Life Science community. Services in the BioCatalogue can be described and searched in multiple ways based upon their technical types, bioinformatics categories, user tags, service providers or data inputs and outputs. They are also subject to constant monitoring, allowing the identification of service problems and changes and the filtering-out of unavailable or unreliable resources. The system is accessible via a human-readable 'Web 2.0'-style interface and a programmatic Web Service interface. The BioCatalogue follows a community approach in which all services can be registered, browsed and incrementally documented with annotations by any member of the scientific community.

  2. Prediction of the Service Life of a Reinforced Concrete Column under Chloride Environment

    Directory of Open Access Journals (Sweden)

    Mohammad K. Alkam

    2015-01-01

    Full Text Available In the present investigation, service life of a reinforced concrete column exposed to chloride environment has been predicted. This study has been based on numerical simulation of chloride ion diffusion in a concrete column during its anticipated life span. The simulation process has included the concrete cover replacement whenever chloride ion concentration has reached the critical threshold value at the reinforcement surface. Repair scheduling of the concrete column under consideration has been discussed. Effects of the concrete cover thickness and the water cement ratio on the service life of the concrete column at hand have been presented. A new approach for arranging locations of reinforcement steel bars has been introduced. This approach is intended to prolong the service life of the concrete column under consideration against chloride induced corrosion.

  3. Life Cycle Characteristics of Small Professional Service Firms

    NARCIS (Netherlands)

    Masurel, E.; van Montfort, C.A.G.M.

    2006-01-01

    Our study of professional services firms clearly revealed that firms change over the course of their life cycles. During the first three stages, diversification in sales, the differentiation in labor force, and the level of labor productivity increase. In the last stage, diversification in sales,

  4. Advanced aircraft service life monitoring method via flight-by-flight load spectra

    Science.gov (United States)

    Lee, Hongchul

    This research is an effort to understand current method and to propose an advanced method for Damage Tolerance Analysis (DTA) for the purpose of monitoring the aircraft service life. As one of tasks in the DTA, the current indirect Individual Aircraft Tracking (IAT) method for the F-16C/D Block 32 does not properly represent changes in flight usage severity affecting structural fatigue life. Therefore, an advanced aircraft service life monitoring method based on flight-by-flight load spectra is proposed and recommended for IAT program to track consumed fatigue life as an alternative to the current method which is based on the crack severity index (CSI) value. Damage Tolerance is one of aircraft design philosophies to ensure that aging aircrafts satisfy structural reliability in terms of fatigue failures throughout their service periods. IAT program, one of the most important tasks of DTA, is able to track potential structural crack growth at critical areas in the major airframe structural components of individual aircraft. The F-16C/D aircraft is equipped with a flight data recorder to monitor flight usage and provide the data to support structural load analysis. However, limited memory of flight data recorder allows user to monitor individual aircraft fatigue usage in terms of only the vertical inertia (NzW) data for calculating Crack Severity Index (CSI) value which defines the relative maneuver severity. Current IAT method for the F-16C/D Block 32 based on CSI value calculated from NzW is shown to be not accurate enough to monitor individual aircraft fatigue usage due to several problems. The proposed advanced aircraft service life monitoring method based on flight-by-flight load spectra is recommended as an improved method for the F-16C/D Block 32 aircraft. Flight-by-flight load spectra was generated from downloaded Crash Survival Flight Data Recorder (CSFDR) data by calculating loads for each time hack in selected flight data utilizing loads equations. From

  5. A Liquid work-life under public service contracting

    DEFF Research Database (Denmark)

    Lindholst, Christian

    for staff, however, are only poorly understood in current theory and research on public service contracting through partial concepts and a tendency to focus merely on negative outcomes. Against this shortfall, the aim in this paper is to build a conceptually and empirically richer and more authentic account......A part of the reality behind public service contracting in Denmark as well as in many other countries is that a growing number of people are employed in uncertain and temporary conditions and relations in what can be characterized as ‘liquidized’ work-lives. This reality and its consequences...... of staffs’ work-life under public service contracting. The paper relies empirically on focus group interviews in two cases of staff transfers in public service contracting with different levels of liquefaction. it is found that staff transfer is a composite experience for staff with differential outcomes...

  6. Automatically exposing OpenLifeData via SADI semantic Web Services.

    Science.gov (United States)

    González, Alejandro Rodríguez; Callahan, Alison; Cruz-Toledo, José; Garcia, Adrian; Egaña Aranguren, Mikel; Dumontier, Michel; Wilkinson, Mark D

    2014-01-01

    Two distinct trends are emerging with respect to how data is shared, collected, and analyzed within the bioinformatics community. First, Linked Data, exposed as SPARQL endpoints, promises to make data easier to collect and integrate by moving towards the harmonization of data syntax, descriptive vocabularies, and identifiers, as well as providing a standardized mechanism for data access. Second, Web Services, often linked together into workflows, normalize data access and create transparent, reproducible scientific methodologies that can, in principle, be re-used and customized to suit new scientific questions. Constructing queries that traverse semantically-rich Linked Data requires substantial expertise, yet traditional RESTful or SOAP Web Services cannot adequately describe the content of a SPARQL endpoint. We propose that content-driven Semantic Web Services can enable facile discovery of Linked Data, independent of their location. We use a well-curated Linked Dataset - OpenLifeData - and utilize its descriptive metadata to automatically configure a series of more than 22,000 Semantic Web Services that expose all of its content via the SADI set of design principles. The OpenLifeData SADI services are discoverable via queries to the SHARE registry and easy to integrate into new or existing bioinformatics workflows and analytical pipelines. We demonstrate the utility of this system through comparison of Web Service-mediated data access with traditional SPARQL, and note that this approach not only simplifies data retrieval, but simultaneously provides protection against resource-intensive queries. We show, through a variety of different clients and examples of varying complexity, that data from the myriad OpenLifeData can be recovered without any need for prior-knowledge of the content or structure of the SPARQL endpoints. We also demonstrate that, via clients such as SHARE, the complexity of federated SPARQL queries is dramatically reduced.

  7. International Space Station Bacteria Filter Element Service Life Evaluation

    Science.gov (United States)

    Perry, J. L.

    2005-01-01

    The International Space Station (ISS) uses high-efficiency particulate air filters to remove particulate matter from the cabin atmosphere. Known as bacteria filter elements (BFEs), there are 13 elements deployed on board the ISS's U.S. segment in the flight 4R assembly level. The preflight service life prediction of 1 yr for the BFEs is based upon engineering analysis of data collected during developmental testing that used a synthetic dust challenge. While this challenge is considered reasonable and conservative from a design perspective, an understanding of the actual filter loading is required to best manage the critical ISS program resources. Testing was conducted on BFEs returned from the ISS to refine the service life prediction. Results from this testing and implications to ISS resource management are provided.

  8. Accounting for ecosystem services in life cycle assessment, Part I: a critical review.

    Science.gov (United States)

    Zhang, Yi; Singh, Shweta; Bakshi, Bhavik R

    2010-04-01

    If life cycle oriented methods are to encourage sustainable development, they must account for the role of ecosystem goods and services, since these form the basis of planetary activities and human well-being. This article reviews methods that are relevant to accounting for the role of nature and that could be integrated into life cycle oriented approaches. These include methods developed by ecologists for quantifying ecosystem services, by ecological economists for monetary valuation, and life cycle methods such as conventional life cycle assessment, thermodynamic methods for resource accounting such as exergy and emergy analysis, variations of the ecological footprint approach, and human appropriation of net primary productivity. Each approach has its strengths: economic methods are able to quantify the value of cultural services; LCA considers emissions and assesses their impact; emergy accounts for supporting services in terms of cumulative exergy; and ecological footprint is intuitively appealing and considers biocapacity. However, no method is able to consider all the ecosystem services, often due to the desire to aggregate all resources in terms of a single unit. This review shows that comprehensive accounting for ecosystem services in LCA requires greater integration among existing methods, hierarchical schemes for interpreting results via multiple levels of aggregation, and greater understanding of the role of ecosystems in supporting human activities. These present many research opportunities that must be addressed to meet the challenges of sustainability.

  9. Caregivers' quality of life and quality of services for children with cancer: a review from iran.

    Science.gov (United States)

    Sajjadi, Homeira; Vameghi, Meroe; Ghazinour, Mehdi; Khodaeiardekani, Mohammadreza

    2013-03-04

    Caregivers of cancer patients are exposed to different types of psychosocial stress which influence their quality of life. The purposes of this study were to assess quality of life in caregivers of children with cancer and to investigate the relationship between the caregivers' quality of life and quality of services in the social work section. 125 caregivers were recruited. Quality of life was measured by the Iranian version of the WHOQOL-BREF questionnaire and data concerning service quality were obtained from the Iranian version of the SERVQUAL questionnaire. Scores in physical health, psychological status and environmental conditions for caregivers of children with cancer were significantly lower than the general population. There was a negative correlation between the tangible domain of SERVQUAL and the psychological status and environmental conditions of quality of life. The tangible dimension was the only aspect of service quality to predict caregivers' quality of life regarding psychological status and environmental conditions. Caregivers of children with a disease are care consumers and, like all consumers, they expect good service. Delivering high quality services consistently is difficult but profitable for a service organization. In other words, trying to deliver more appropriate services than patients expect to receive from their social work care is one of the most reliable ways to promote caregivers' satisfaction and quality of life.

  10. Caregivers’ Quality of Life and Quality of Services for Children with Cancer: A Review from Iran

    Science.gov (United States)

    Sajjadi, Homeira; Vameghi, Meroe; Ghazinour, Mehdi; KhodaeiArdakani, Mohammadreza

    2013-01-01

    Objective: Caregivers of cancer patients are exposed to different types of psychosocial stress which influence their quality of life. The purposes of this study were to assess quality of life in caregivers of children with cancer and to investigate the relationship between the caregivers’ quality of life and quality of services in the social work section. Method: 125 caregivers were recruited. Quality of life was measured by the Iranian version of the WHOQOL-BREF questionnaire and data concerning service quality were obtained from the Iranian version of the SERVQUAL questionnaire. Findings: Scores in physical health, psychological status and environmental conditions for caregivers of children with cancer were significantly lower than the general population. There was a negative correlation between the tangible domain of SERVQUAL and the psychological status and environmental conditions of quality of life. The tangible dimension was the only aspect of service quality to predict caregivers’ quality of life regarding psychological status and environmental conditions. Conclusion: Caregivers of children with a disease are care consumers and, like all consumers, they expect good service. Delivering high quality services consistently is difficult but profitable for a service organization. In other words, trying to deliver more appropriate services than patients expect to receive from their social work care is one of the most reliable ways to promote caregivers’ satisfaction and quality of life. PMID:23618487

  11. Determination of service lives under varying loading using a life-fraction rule. Pt. 1

    International Nuclear Information System (INIS)

    Schaefer, L.

    1986-01-01

    Previously the attempt has been made to improve the often accuracy of the life-fraction rule (Robinson), applied to calculate the service lives under varying loading, by introducing constants into the mathematical representation of the rule which take into account the influence of the material and the conditions of loading. Therefore, the calculated service lives are not real predictions. In this work description based on constants is dispensed with and only one boundary condition is indicated for the life-fraction rule which is necessary and sufficient to calculate correctly any fractional damage and hence any service life under varying loading. The abbreviated wording of this boundary condition is: To calculate a fractional damage, the life fraction tsub(i) must be devided by a service life tsub(m,i), the structural condition Gsub(i) being the same. The specimen (X10NiCrTi1616 steel) will rupture as soon as the sum of fractional damages has attained unity: Σsub(i)(tsub(i)/tsub(m,i)) sub(Gsub(i)) = 1. (orig./GSCH)

  12. In-Service Aircraft Transmission Life Modeling for Improved Flight Safety, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — It is proposed to develop an accurate, in-service transmission life-estimation system for the prediction of remaining component and system life for a helicopter...

  13. In-Service Aircraft Transmission Life Modeling for Improved Flight Safety, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — It is proposed to develop an accurate, in-service transmission life-use estimation system for the prediction of remaining component and system life for a helicopter...

  14. Experimental methods for consideration of concrete cracking in service life design

    DEFF Research Database (Denmark)

    Pease, Bradley Justin; Geiker, Mette Rica; Stang, Henrik

    2011-01-01

    .e., concrete with cracks at start of service) and to more accurately estimate time-to-cracking due to reinforcement corrosion based on experimental measurements. This paper presents two non-destructive measurement techniques with potential to quantify the impact concrete cracks have on service life...

  15. Perceptions of Pre-Service Teachers on Student Burnout, Occupational Anxiety and Faculty Life Quality

    Science.gov (United States)

    Türkoglu, Muhammet Emin; Cansoy, Ramazan

    2017-01-01

    Perceptions of pre-service teachers on burnout, occupational anxiety and faculty life quality were investigated in this research. The research group consisted of 461 pre-service teachers in total studying at Afyon Kocatepe University faculty of education. "Maslach Burnout Inventory-Student Form," "Faculty Life Quality Scale"…

  16. Optimization of NPP performance and service life in a competitive electricity market

    International Nuclear Information System (INIS)

    Gueorguiev, B.; Spielgelberg - Planner, R.

    2000-01-01

    This paper discusses how the competitive electricity market has influenced nuclear power plant operations, with a focus on optimisation of NPP performance and plant service life, and how the IAEA programme has addressed some of this issues. The definitions of Plant Life, Operational Life, Design Life and Periodical Safety Reviews are developed in the paper in order to differentiate between the terms and to show the significance in terms of Plant Life Management

  17. Service life optimization and extension of structures

    International Nuclear Information System (INIS)

    Hornet, P.; Venturini, V.; Persoz, M.; Debost-Eymard, I.; Meister, E.

    1998-01-01

    In order to justify its power plants safety which conditions their service life, EDF uses a deterministic approach until now. A probabilistic approach also exists which has a decisive advantage because it quantifies risk and makes it possible to optimize maintenance volume. The application of this approach is illustrated on the case of a reactor vessel; a coupling between the Code Aster tool and a probabilistic analysis software is necessary. (authors)

  18. Threats Management Throughout the Software Service Life-Cycle

    Directory of Open Access Journals (Sweden)

    Erlend Andreas Gjære

    2014-04-01

    Full Text Available Software services are inevitably exposed to a fluctuating threat picture. Unfortunately, not all threats can be handled only with preventive measures during design and development, but also require adaptive mitigations at runtime. In this paper we describe an approach where we model composite services and threats together, which allows us to create preventive measures at design-time. At runtime, our specification also allows the service runtime environment (SRE to receive alerts about active threats that we have not handled, and react to these automatically through adaptation of the composite service. A goal-oriented security requirements modelling tool is used to model business-level threats and analyse how they may impact goals. A process flow modelling tool, utilising Business Process Model and Notation (BPMN and standard error boundary events, allows us to define how threats should be responded to during service execution on a technical level. Throughout the software life-cycle, we maintain threats in a centralised threat repository. Re-use of these threats extends further into monitoring alerts being distributed through a cloud-based messaging service. To demonstrate our approach in practice, we have developed a proof-of-concept service for the Air Traffic Management (ATM domain. In addition to the design-time activities, we show how this composite service duly adapts itself when a service component is exposed to a threat at runtime.

  19. Method and apparatus to predict the remaining service life of an operating system

    Science.gov (United States)

    Greitzer, Frank L.; Kangas, Lars J.; Terrones, Kristine M.; Maynard, Melody A.; Pawlowski, Ronald A. , Ferryman; Thomas A.; Skorpik, James R.; Wilson, Bary W.

    2008-11-25

    A method and computer-based apparatus for monitoring the degradation of, predicting the remaining service life of, and/or planning maintenance for, an operating system are disclosed. Diagnostic information on degradation of the operating system is obtained through measurement of one or more performance characteristics by one or more sensors onboard and/or proximate the operating system. Though not required, it is preferred that the sensor data are validated to improve the accuracy and reliability of the service life predictions. The condition or degree of degradation of the operating system is presented to a user by way of one or more calculated, numeric degradation figures of merit that are trended against one or more independent variables using one or more mathematical techniques. Furthermore, more than one trendline and uncertainty interval may be generated for a given degradation figure of merit/independent variable data set. The trendline(s) and uncertainty interval(s) are subsequently compared to one or more degradation figure of merit thresholds to predict the remaining service life of the operating system. The present invention enables multiple mathematical approaches in determining which trendline(s) to use to provide the best estimate of the remaining service life.

  20. Service Life and Maintenance Modelling of Reinforced Concrete Bridge Decks

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Recent research in the area of assessment and maintenance of reinforced concrete bridge decks is presented in this paper. Three definitions of service lifetime are introduced and the difficult problem of assessing the service life is discussed. A stochastic modelling of corrosion and corrosion...... cracking is introduced and the site dependency of corrosion is stressed. Finally, a recently developed optimal repair strategy for bridges is briefly explained....

  1. Service Life Extension of the Propulsion System of Long-Term Manned Orbital Stations

    Science.gov (United States)

    Kamath, Ulhas; Kuznetsov, Sergei; Spencer, Victor

    2014-01-01

    One of the critical non-replaceable systems of a long-term manned orbital station is the propulsion system. Since the propulsion system operates beginning with the launch of station elements into orbit, its service life determines the service life of the station overall. Weighing almost a million pounds, the International Space Station (ISS) is about four times as large as the Russian space station Mir and about five times as large as the U.S. Skylab. Constructed over a span of more than a decade with the help of over 100 space flights, elements and modules of the ISS provide more research space than any spacecraft ever built. Originally envisaged for a service life of fifteen years, this Earth orbiting laboratory has been in orbit since 1998. Some elements that have been launched later in the assembly sequence were not yet built when the first elements were placed in orbit. Hence, some of the early modules that were launched at the inception of the program were already nearing the end of their design life when the ISS was finally ready and operational. To maximize the return on global investments on ISS, it is essential for the valuable research on ISS to continue as long as the station can be sustained safely in orbit. This paper describes the work performed to extend the service life of the ISS propulsion system. A system comprises of many components with varying failure rates. Reliability of a system is the probability that it will perform its intended function under encountered operating conditions, for a specified period of time. As we are interested in finding out how reliable a system would be in the future, reliability expressed as a function of time provides valuable insight. In a hypothetical bathtub shaped failure rate curve, the failure rate, defined as the number of failures per unit time that a currently healthy component will suffer in a given future time interval, decreases during infant-mortality period, stays nearly constant during the service

  2. Service life assessment of timber highway bridges in USA climate zones

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

    2014-01-01

    As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

  3. Simulating the service life performance of an inspected group of jacket-type structures

    DEFF Research Database (Denmark)

    Schneider, Ronald; Thöns, Sebastian; Rogge, Andreas

    2017-01-01

    and risk. We intend to adopt this approach to optimize inspection, monitoring and repair activities for offshore wind park support structures. As a first step, we simulate – in analogy to an offshore wind park – the service life performance of an inspected group of jacket-type frames. The performance......A novel method for risk-based optimization of inspection and repair strategies for deteriorating structural systems has recently been proposed. The method defines heuristics at the system level to reduce the number of possible strategies. For each defined strategy, it computes the updated system...... failure probability conditional on simulated inspection and repair histories, and evaluates the associated costs and risk. The expected total service life costs and risk for a strategy are finally determined using Monte Carlo simulation. The optimal strategy minimizes the expected total service life costs...

  4. Effect of home care service on the quality of life in patients with gynecological cancer.

    Science.gov (United States)

    Aktas, Demet; Terzioglu, Fusun

    2015-01-01

    The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits (1st, 12th weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols (1st, 12th weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: 6.01±0.64), while the control group had comparatively lower quality (average mean: 4.35±0.79) within the 12 week post- discharge period (phome care services to be efficient in improving the quality of life in patients with gynecological cancer.

  5. Effective technical service in the life cycle of heavy dumpers

    Directory of Open Access Journals (Sweden)

    Михайло Валерійович Помазков

    2016-11-01

    Full Text Available A comparative analysis of the known systems of technical reliability of heavy dumpers functionality has been made. It has been stated that the previously proposed methods to determine the optimal service life of heavy-duty dumpers are not effective enough and do not take into account the whole range of factors specific to the operation of heavy dumpers in the current economic realities of industrial enterprises. Based on the analysis results, a mechanism of determining the optimal service life of heavy-duty dumpers and their constituent technical systems ensuring the operational reliability of heavy-duty dumpers has been offered. The article takes into account the analysis of resource factors, general description of system logistic tasks, the main provisions of serviceability, the resource forming in route charts at ore mining and metallurgical enterprises, the use of theoretical developments in practice. Heavy dumpers generalized description modelling shown in the article, the principle of resource use by using interchangable work at different intensity routes has received confirmation in the dumpers’ work schedule

  6. Influence of Superheated Steam Temperature Regulation Quality on Service Life of Boiler Steam Super-Heater Metal

    Directory of Open Access Journals (Sweden)

    G. T. Kulakov

    2009-01-01

    Full Text Available The paper investigates influence of change in quality of superheated steam temperature regulations on service life of super-heater metal. А dependence between metal service life and dispersion value for different steel grades has been determined in the paper. Numerical values pertaining to increase of super-heater metal service life in case of transferring from manual regulation to standard system of automatic regulation (SAR have been determined and in case of transferring from standard SAR to improved SAR. The analysis of tabular data and plotted dependencies makes it possible to conclude that any change in conditions of convection super-heater metal work due to better quality of the regulation leads to essential increase of time period which is left till the completion of the service life of a super-heater heating surface.

  7. Impact of Child Life Services on Children and Families Admitted to Start the Ketogenic Diet.

    Science.gov (United States)

    Kossoff, Eric H; Sutter, Lindsay; Doerrer, Sarah C; Haney, Courtney A; Turner, Zahava

    2017-08-01

    Traditionally the ketogenic diet is started as an inpatient admission to the hospital. Starting in January 2015, child life services were made formally available during ketogenic diet admissions to help families cope. One-page surveys were then provided to 15 parents on the day of discharge and again after 3 months. Every family believed that the child life services were helpful. Children who were developmentally appropriate/mildly delayed had higher parent-reported anxiety scores than those who were moderate to severely delayed (4.4 vs 1.0, P = .02). At 3 months, child life services were deemed very helpful for the parents (mean score: 8.9, range: 5-10), and were more helpful for the parent than the child (mean 6.2, range 1-10, P = .047). One of the most helpful services was a prior phone call to parents 1 week prior. In this small pilot study, child life involvement during the start of the ketogenic diet was highly useful.

  8. Measuring Service-Mindedness and Its Relationship with Spirituality and Life Satisfaction

    Science.gov (United States)

    Pashak, Travis J.; Laughter, Tim C.

    2012-01-01

    A self-report measure of service-mindedness was designed in order to fill in a gap in the literature and evaluate a potential link between spirituality and satisfaction with life. A sample of 133 undergraduate students at a Catholic university in the Mid-west completed the Service-Mindedness Scale (SMS), along with the Spiritual Involvement and…

  9. Health-Related Quality of Life of Rural Clients Seeking Telepsychology Services

    Directory of Open Access Journals (Sweden)

    Kevin R. Tarlow

    2014-01-01

    Full Text Available Sixty million US residents live in rural areas, but health policies and interventions developed from an urban mindset often fail to address the significant barriers to health experienced by these local communities. Telepsychology, or psychological services delivered by distance via technology, is an emerging treatment modality with special implications for underserved rural areas. This study found that a sample of rural residents seeking telepsychology services (n=94 had low health-related quality of life (HRQOL, often due to cooccurring physical and mental health diagnoses including high rates of depression. However, a brief telepsychology treatment delivered to rural clients (n=40 was associated with an improvement in mental health-related quality of life (d = 0.70,  P<.001. These results indicate that despite the complex health needs of these underserved communities, telepsychology interventions may help offset the disparities in health service access in rural areas.

  10. Pre-Service Teachers in Second Life: Potentials of Simulations

    Science.gov (United States)

    Teoh, Jase

    2012-01-01

    An in-depth qualitative study with nine secondary pre-service teachers from an undergraduate "Language and Literacy" class was conducted to examine the potential of simulation using Second Life (SL) in teacher education. Games and simulations were operationally defined in the broadest sense to distinguish key characteristics between…

  11. The development of socially responsible life-sciences teachers through community service learning.

    Directory of Open Access Journals (Sweden)

    J.J. Rian de Villiers

    2012-03-01

    Full Text Available In South Africa, polices in higher education are urging tertiary institutions to produce graduates who are socially responsible citizens. One method of achieving this is through service-learning initiatives. Zoos as community partners can provide exciting educational opportunities for students to do animal behaviour studies and to develop their social responsibility. A sample of 58 preservice life-sciences teachers from a South African university completed a questionnaire on their animal behaviour studies. This study sought to determine how animal behaviour studies could successfully be incorporated as a community service-learning project in a zoo setting, what the educational value of these studies was and what the benefits were of incorporating this community service-learning component in the life-sciences course. The incorporation of the service-learning component into the zoology course led to the students’ personal and professional development, knowledge about themselves, sensitivity to cultural diversity, civic responsibility and insights into the ways in which communities operate. For a successful service-learning project, lectures, students and community partners should all have a sense of engagement. A number of suggestions are made to improve the incorporation of this service-learning component into the existing zoology course.

  12. A Review of Perspectives on Frameworks for Ethical Theories in Public Service Life

    Directory of Open Access Journals (Sweden)

    Deoram Sing

    2016-06-01

    Full Text Available Given the dynamic and changing interwoven and intertwined internal and external environments impacting on public service life, establishing and promoting a proper ethical foundation in public service life, has in itself emerged as a profound and daunting challenge, a worldwide phenomenon. The role of frameworks for ethical theories  –  such as teleological, deontological, virtue-based, and learning and growth, is crucial to dealing with this challenge. It is the view of the author that a keen grasp and application of the various frameworks, as well as their various components, could project their viewing and that of their components, not in isolation, but in an interconnected and intertwined manner. This could enhance the clarification of ethical and moral alternatives, as well as facilitate the spreading and diffusion of techniques for ethical reasoning and moral awareness, throughout public service life.

  13. METHODS AND RESEARCH CONCERNING SERVICE LIFE EXTENSION OF SUPORTING STRUCTURES OF TRACTION ROLLING STOCK FOR INDUSTRIAL TRANSPORT

    Directory of Open Access Journals (Sweden)

    O. M. Bondarev

    2014-04-01

    Full Text Available Purpose. The purpose of work is scientifically grounded introduction of the acquired techniques into works for service life extension of the traction and motor rolling stock for industrial transport. Methodology. To achieve the purpose it was analyzed the acquired techniques for service life extension of the traction and motor rolling stock for mainline transport. The acquired techniques during solution of problems concerning the service life extension of rolling stock units were adapted to the locomotives TGM6A and traction aggregates OPE1. Findings. On the basis of experimental and theoretical complex of studies some results were obtained. They gave the ground to determine the possibility of acquired techniques use when solving the problems on service life extension of rolling stock units concerning locomotives TGM6A and traction aggregates OPE1. Originality. On the basis of conducted experimental and theoretical studies scientific maintenance of the works providing extension of service life of traction and motor units of industrial rolling stock was executed. Practical value. Technical solutions and measures, which have to be carried out during operation within the prolonged appointed service life of traction and motor units of industrial rolling stock enterprises using locomotives and traction aggregates to provide the basic technological cycles were developed.

  14. Evaluation of Hose in Hose Transfer Line Service Life for Hanfords Interim Stabilization Program

    International Nuclear Information System (INIS)

    TORRES, T.D.

    2001-01-01

    RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program (Torres, 2000a), defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of waste transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program (Torres, 2000b), has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications associated with Interim Stabilization. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning, RPP-6028 Section 3.2.7. Performance Incentive Number ORP-05 requires that all the Single Shell Tanks be Interim Stabilized by September 30, 2003. The Tri-Party Agreement (TPA) milestone M-41-00, enforced by a federal consent decree, requires all the Single Shell Tanks to be Interim stabilized by September 30, 2004. By meeting the Performance Incentive the TPA milestone is met. Prudent engineering dictates that the equipment used to transfer waste have a life in excess of the forecasted operational time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer, published literature and calculations. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are the hose material's resistance to the harmful effects of process fluid characteristics, ambient environmental conditions, exposure to ionizing radiation and the

  15. Determining Service Life of Respirator Cartridges Using a Simple and Practical Method: Case Study in a Car Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    A.M Rashidi

    2012-01-01

    Full Text Available Background and aims: For ensuring about proper performance of air-purifying respirators in providing protection against workplace contaminants, it is necessary to change the respirator cartridges before the end of their service life. The aim of this study was determination of service life of organic vapor cartridges using a simple and practical method in a spray painting booth of a car manufacturing industry.   Methods: NIOSH MultiVapor software was used for estimating service life of respirator cartridges based on workplace conditions and cartridge specifications. Efficiency of determined service life was investigated using an apparatus for field testing of cartridges in the workplace.   Results: The results showed that existing schedule for changing the respirator cartridges is not effective and no longer provide adequate protection for sprayers against organic contaminants while working in a painting booth. It is necessary to change the cartridges before their estimated service life (every 4 hours.   Conclusion: NIOSH MultiVapor has acceptable efficiency for determining respirator cartridges service life and could be used as a simple and practical method in the workplace. Moreover, Service life estimated by this software was confirmed by cartridge field test apparatus.

  16. Evaluation of Hose in Hose Transfer Line Service Life for Hanford's Interim Stabilization Program

    International Nuclear Information System (INIS)

    TORRES, T.D.

    2000-01-01

    RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program, defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program, has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning. Prudent engineering dictates that the equipment placed in service have a working life in excess of this forecasted time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer and published literature. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are process fluid characteristics, ambient environmental conditions, and the manufacturer's stated shelf life. This evaluation examines the manufacturer's certification of shelf life, the manufacturer's certifications of chemical compatibility with waste, and published literature on the effects of exposure to ionizing radiation on the mechanical properties of elastomeric materials to evaluate transfer line service life

  17. Associated and mediating variables related to quality of life among service users with mental disorders.

    Science.gov (United States)

    Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie

    2018-02-01

    This study aimed to identify variables associated with quality of life (QoL) and mediating variables among 338 service users with mental disorders in Quebec (Canada). Data were collected using nine standardized questionnaires and participant medical records. Quality of life was assessed with the Satisfaction with Life Domains Scale. Independent variables were organized into a six-block conceptual framework. Using structural equation modeling, associated and mediating variables related to QoL were identified. Lower seriousness of needs was the strongest variable associated with QoL, followed by recovery, greater service continuity, gender (male), adequacy of help received, not living alone, absence of substance use or mood disorders, and higher functional status, in that order. Recovery was the single mediating variable linking lower seriousness of needs, higher service continuity, and reduced alcohol use with QoL. Findings suggest that greater service continuity creates favorable conditions for recovery, reducing seriousness of needs and increasing QoL among service users. Lack of recovery-oriented services may affect QoL among alcohol users, as substance use disorders were associated directly and negatively with QoL. Decision makers and mental health professionals should promote service continuity, and closer collaboration between primary care and specialized services, while supporting recovery-oriented services that encourage service user involvement in their treatment and follow-up. Community-based organizations should aim to reduce the seriousness of needs particularly for female service users and those living alone.

  18. Development of laboratory acceleration test method for service life prediction of concrete structures

    International Nuclear Information System (INIS)

    Cho, M. S.; Song, Y. C.; Bang, K. S.; Lee, J. S.; Kim, D. K.

    1999-01-01

    Service life prediction of nuclear power plants depends on the application of history of structures, field inspection and test, the development of laboratory acceleration tests, their analysis method and predictive model. In this study, laboratory acceleration test method for service life prediction of concrete structures and application of experimental test results are introduced. This study is concerned with environmental condition of concrete structures and is to develop the acceleration test method for durability factors of concrete structures e.g. carbonation, sulfate attack, freeze-thaw cycles and shrinkage-expansion etc

  19. mORCA: ubiquitous access to life science web services.

    Science.gov (United States)

    Diaz-Del-Pino, Sergio; Trelles, Oswaldo; Falgueras, Juan

    2018-01-16

    Technical advances in mobile devices such as smartphones and tablets have produced an extraordinary increase in their use around the world and have become part of our daily lives. The possibility of carrying these devices in a pocket, particularly mobile phones, has enabled ubiquitous access to Internet resources. Furthermore, in the life sciences world there has been a vast proliferation of data types and services that finish as Web Services. This suggests the need for research into mobile clients to deal with life sciences applications for effective usage and exploitation. Analysing the current features in existing bioinformatics applications managing Web Services, we have devised, implemented, and deployed an easy-to-use web-based lightweight mobile client. This client is able to browse, select, compose parameters, invoke, and monitor the execution of Web Services stored in catalogues or central repositories. The client is also able to deal with huge amounts of data between external storage mounts. In addition, we also present a validation use case, which illustrates the usage of the application while executing, monitoring, and exploring the results of a registered workflow. The software its available in the Apple Store and Android Market and the source code is publicly available in Github. Mobile devices are becoming increasingly important in the scientific world due to their strong potential impact on scientific applications. Bioinformatics should not fall behind this trend. We present an original software client that deals with the intrinsic limitations of such devices and propose different guidelines to provide location-independent access to computational resources in bioinformatics and biomedicine. Its modular design makes it easily expandable with the inclusion of new repositories, tools, types of visualization, etc.

  20. Mobile phone use for contacting emergency services in life-threatening circumstances.

    Science.gov (United States)

    Wu, Olivia; Briggs, Andrew; Kemp, Tom; Gray, Alastair; MacIntyre, Kate; Rowley, Jack; Willett, Keith

    2012-03-01

    The potential health benefits of mobile phone use have not been widely studied, except for telemedicine-type applications. This study seeks to determine whether initial contact with emergency services via a mobile phone in life-threatening situations is associated with potential health benefits when compared to contact via a landline. A record-linkage study was carried out in which data from all emergency dispatches for immediately life-threatening events from a United Kingdom county ambulance service were linked to the Patient Admission System at two major local hospitals. Mortality (at the scene, at the emergency department [ED], and during hospitalization); transfer to the ED; admission (inpatient care, and intensive care unit); and length of stay were analyzed for calls classified as Code Red (immediately life-threatening) by initial exposure (mobile phone vs. landline), while controlling for potential confounding variables. Of 354,199 ambulances dispatched to attend emergency incidents, 66% transported patients to the hospital while 2% stood down due to death at the scene. Mobile phone compared to landline reporting of emergencies resulted in significant reductions in the risk of death at the scene (odds ratio [OR] 0.77), but not for death in the ED or during inpatient admission. The risk of being transferred to the ED and subsequent inpatient admission were significantly lower with reporting from mobile phones compared to landline (OR 0.93 and OR 0.82, respectively). In this study, evidence of statistical association was demonstrated between the use of mobile phones to alert ambulance services in life-threatening situations and improved outcomes for patients. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Computational Everyday Life Human Behavior Model as Servicable Knowledge

    Science.gov (United States)

    Motomura, Yoichi; Nishida, Yoshifumi

    A project called `Open life matrix' is not only a research activity but also real problem solving as an action research. This concept is realized by large-scale data collection, probabilistic causal structure model construction and information service providing using the model. One concrete outcome of this project is childhood injury prevention activity in new team consist of hospital, government, and many varieties of researchers. The main result from the project is a general methodology to apply probabilistic causal structure models as servicable knowledge for action research. In this paper, the summary of this project and future direction to emphasize action research driven by artificial intelligence technology are discussed.

  2. Reactor Dosimetry Aspects of the Service Life Extension of the Hungarian Paks NPP

    Directory of Open Access Journals (Sweden)

    Zsolnay Eva M.

    2016-01-01

    Full Text Available The service life of the Hungarian Paks Nuclear Power Plant (NPP will be extended from the originally planned 30 years to 50 years. To improve the reliability of the results obtained in frame of the old reactor pressure vessel (RPV surveillance programme, new methods have been developed, and based on them, the old exposition data have been re-evaluated for all the four reactor units. At the same time, a new RPV surveillance programme has been developed and introduced, and long term irradiations have been performed to determine the radiation damage of the surveillance specimens due to the high fast neutron exposition. Neutron transport calculations have been performed with a validated neutron transport code system to determine the fast neutron exposition of the RPVs during the extended service life. The cavity dosimetry is in the introductory phase. This paper presents the new developments in the field of the RPV surveillance dosimetry and summarises the results obtained. According to the results the service life of the NPP can safely be extended for the planned 50 years.

  3. The influences of patient's satisfaction with medical service delivery, assessment of medical service, and trust in health delivery system on patient's life satisfaction in China.

    Science.gov (United States)

    Tang, Liyang

    2012-09-14

    Patient's satisfaction with medical service delivery/assessment of medical service/trust in health delivery system may have significant influence on patient's life satisfaction in China's health delivery system/in various kinds of hospitals.The aim of this study was to test whether and to what extent patient's satisfaction with medical service delivery/patient's assessments of various major aspects of medical service/various major aspects of patient's trust in health delivery system influenced patient's life satisfaction in China's health delivery system/in various kinds of hospitals. This study collaborated with National Bureau of Statistics of China to carry out a 2008 national urban resident household survey in 17 provinces, autonomous regions, and municipalities directly under the central government (N = 3,386), and specified ordered probit models were established to analyze dataset from this household survey. The key considerations in generating patient's life satisfaction involved patient's overall satisfaction with medical service delivery, assessment of doctor-patient communication, assessment of medical cost, assessment of medical treatment process, assessment of medical facility and hospital environment, assessment of waiting time for medical service, trust in prescription, trust in doctor, and trust in recommended medical examination. But the major considerations in generating patient's life satisfaction were different among low level public hospital, high level public hospital, and private hospital. The promotion of patient's overall satisfaction with medical service delivery, the improvement of doctor-patient communication, the reduction of medical cost, the improvement of medical treatment process, the promotion of medical facility and hospital environment, the reduction of waiting time for medical service, the promotion of patient's trust in prescription, the promotion of patient's trust in doctor, and the promotion of patient's trust in

  4. Analysis and modeling of hot extrusion die for its service life enhancement

    Science.gov (United States)

    Akhtar, Syed Sohail

    Aluminum extrusion finds extensive application in the construction, automobile and aerospace industries. High pressures, elevated temperatures, complex and intricate section geometries lead to repeated mechanical and thermal stresses in the die and affiliated tooling. Product rework and rejects can be traced back to various defects spread over the die life cycle: die design, die manufacture and heat treatment, process parameters, inprocess die maintenance/correction and, billet type and quality. Therefore, improved and efficient service life of die and related tooling used in the extrusion press is one the most important factors in maximizing productivity and minimizing cost for ensuring the economical efficiency of an aluminum extrusion plant. How often a die has to be scrapped and replaced with a new one directly contributes to the commercial viability of producing a certain profile. The focus of the current work is on three distinct yet inter-related studies pertaining to the improvement of aluminum extrusion die. Study-A (Die Failure Analysis) is an investigation of various modes and critical failure types based on industrial data (Chapter-2 ), examination of failed dies and finite element simulation for identification of critical process parameters and design features in die fatigue-life (Chapter-3). In Study-B (Die Surface Hardening Treatment), two-stage controlled gas nitriding process for H13 steel is evaluated, both experimentally and numerically, in terms of nitrided case morphology and properties (Chapter-4) followed by experimental and numerical investigation of the effects of repeated nitriding (Chapter-5), pre-nitriding surface preparation (Chapter-6) and die profile geometry (Chapter-7) on nitriding performance in regard to die service life. In Study-C (Effect of Billet Quality on Die Life), the effect of billet quality and related influencing extrusion parameters on the die service life is investigated based on industrial data and some regression

  5. Measuring the Effect of Tourism Services on Travelers' Quality of Life: Further Validation.

    Science.gov (United States)

    Neal, Janet D.; Sirgy, M. Joseph; Uysal, Muzaffer

    2004-01-01

    lication and extension study provided additional validational support of the original tourism services satisfaction measure in relation to QOL-related measures.Neal, Sirgy and Uysal (1999) developed a model and a measure to capture the effect of tourism services on travelers' quality of life (QOL). They hypothesized that travelers' overall life…

  6. Risk based service life prediction of underground cast iron pipes subjected to corrosion

    International Nuclear Information System (INIS)

    Li, C.Q.; Mahmoodian, M.

    2013-01-01

    Aging and deterioration of underground cast iron pipes is inevitable after their long time in service, with corrosion being the most predominant mechanism for pipe failures. Although considerable research has been undertaken in the past few decades, more is on the effects of corrosion on structural capacity of pipes than that on the prediction of their service life. This paper presents a methodology to quantitatively assess the risk of pipe collapse and predict its remaining service life using a time-dependent reliability theory. The concept of stress intensity in fracture mechanics is employed to establish the failure criterion of pipe collapse. An empirical model is derived for maximum pit growth of corrosion from the available data based on mathematical regressions. An example is provided to illustrate the application of the proposed method. It is found in the paper that the risk of pipe collapse increases with an increase in the diameter of the pipe for both external and internal corrosion. It is also found that the tougher the pipe is, the smaller the risk of its collapse. The paper concludes that a time-dependent reliability method is a very useful tool to predict the risk of pipe collapse and its remaining service life. The proposed method can help the water industry develop rehabilitation or replacement strategy for existing pipe networks with a view for better management of the pipe asset

  7. Web-service architecture for tools supporting life-long e-Learning platforms

    NARCIS (Netherlands)

    Dimov, Alexander; Stefanov, Krassen

    2009-01-01

    Dimov, A., & Stefanov, K. (2008). Web-service architecture for tools supporting life-long e-Learning platforms. In R. Koper, K. Stefanov & D. Dicheva (Eds.), Proceedings of the 5th International TENCompetence Open Workshop "Stimulating Personal Development and Knowledge Sharing" (pp. 67-71).

  8. Stator winding service life analysis of wet winding motor RCP

    International Nuclear Information System (INIS)

    Yeoh Eingyee; Li Linsen; Wang Ziguan; Shen Feng

    2017-01-01

    The reactor coolant pump type RUV of KSB is specially designed for the Westinghouse AP1000 reactor. It is hermetically sealed, wet winding motor pump. This wet winding motor concept has higher efficiency as compared to a canned motor since there are no eddy current losses, but this makes the stator cable insulator face the challenge of degradation by γ-irradiation in coolant. Radiation dose at the RUV is evaluated in interest from the material degradation point of view and the service life of stator winding in RUV is preliminarily analyzed. The values obtained are less than the dose rate and the dose which change the mechanical properties of the insulator material. According to the preliminary analysis, it can be concluded that the degradation of cable insulator of stator winding by γ-irradiation in coolant is negligible for the 60 years' service life of reactor coolant pump. This result also ensures crosslinked polyethylene used as cable insulator of stator winding is reliable in reactor coolant pump. (author)

  9. How Do Mobile Information Services Improve Quality of Life? The Case of Japanese Students

    OpenAIRE

    Ghyas, Qazi Mahdia; Kondo, Fumiyo N.

    2016-01-01

    Every technology should be geared to improve the quality of users’ lives. Our study aims to understand how mobile information services (MIS) contribute to quality of life (QoL) for young mobile users. This paper attempts to provide a comprehensive analysis of relationship between two variables: the contribution of MIS in 15 specific life domains and the contribution of MIS to overall quality of life (QoL). We examined bottom-up spillover theory with original and our additional life domains. E...

  10. Reliability and service life of wood structures and buildings

    OpenAIRE

    Zdeňka Havířová; Pavel Kubů

    2005-01-01

    Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC) of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1), energy savings and thermal protection (ER6) and hygiene, health and e...

  11. Evaluation of Hose in Hose Transfer Line Service Life for Hanford's Interim Stabilization Program

    Energy Technology Data Exchange (ETDEWEB)

    TORRES, T.D.

    2000-08-24

    RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program, defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program, has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning. Prudent engineering dictates that the equipment placed in service have a working life in excess of this forecasted time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer and published literature. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are process fluid characteristics, ambient environmental conditions, and the manufacturer's stated shelf life. This evaluation examines the manufacturer's certification of shelf life, the manufacturer's certifications of chemical compatibility with waste, and published literature on the effects of exposure to ionizing radiation on the mechanical properties of elastomeric materials to evaluate transfer line service life.

  12. Tackling the work-life balance challenge in Professional Service Firms: the impact of projects, organizing and service characteristics

    NARCIS (Netherlands)

    Noury, L.C.; Gand, Sébastien; Sardas, Jean-Claude

    2017-01-01

    Professional Service Firms (PSFs) are currently under considerable pressure for economic reasons (low growth, pressure on cost), but also from the emergence of individual demands for work-life balance (WLB) from professionals, which challenge traditional ways of organizing both projects and careers.

  13. Home care clients in the last year of life: is material deprivation associated with service characteristics?

    Science.gov (United States)

    Goodridge, Donna; Buckley, Alan; Marko, Josh; Steeves, Megan; Turner, Hollie; Whitehead, Steve

    2011-09-01

    To compare demographic, social, medical, and health care characteristics of home care clients in the last year of life by quintile of deprivation and examine associations between material deprivation and service characteristics. This retrospective study used administrative data for 700 clients who died while receiving home care services. Outcome measures were the receipt of supportive or palliative home care. Associations were assessed using multiple logistic regression. Material deprivation was not associated with either the hours of home care received or the receipt of supportive home care services. Clients with dementia or stroke, those were older than 80 years and those who were single were less likely to receive palliative care services than other groups. Inequalities in allocation of home care services based on age, diagnosis, and marital status, but not material deprivation, suggest the need to carefully match service with need at the end of life.

  14. Strategies for the improvement of quality of life and service at the wellsite

    International Nuclear Information System (INIS)

    Lombardo, G.J.; McCants, K.J.; Klein, M.

    1991-01-01

    The oil industry, particularly exploration and production drilling has always had to contend with a remarkable set of conditions: complicated logistics, remote locations, twenty four hour daily operations, and long and uneven schedules, to mention only a few. Invariably, operations personnel particularly service company personnel are required to perform highly technical, often critical tasks for long periods of time without the benefit of sustained periods of restfulness. This condition is compounded by irregular days-off schedules and the offshore environment itself. Research in other industries has shown that scheduling conditions similar to those experienced in the E and P drilling industry have lowered the standard of life, general health, safety and performance of employees. With the move towards higher technology and even more critical tasks, more demanding employees and an essentially unchanged working environment, the problems are compounded even further. Work related stress and quality of life have become important factors in our employees' career decisions and their ability to work safely. This paper discusses the evaluation of the work schedule and work/living conditions of the wellsite measurement and services personnel of Anadrill Schlumberger, and concludes with methods to improve the safety, health and general quality of life of those personnel and the service quality they can deliver

  15. Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service.

    NARCIS (Netherlands)

    Gerritse, B.M.; Schalkwijk, A.; Pelzer, B.J.; Scheffer, G.J.; Draaisma, J.M.T.

    2010-01-01

    BACKGROUND: To determine the advanced life support procedures provided by an Emergency Medical Service (EMS) and a Helicopter Emergency Medical Service (HEMS) for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures

  16. A Model for Service Life Control of Selected Device Systems

    Directory of Open Access Journals (Sweden)

    Zieja Mariusz

    2014-04-01

    Full Text Available This paper presents a way of determining distribution of limit state exceedence time by a diagnostic parameter which determines accuracy of maintaining zero state. For calculations it was assumed that the diagnostic parameter is deviation from nominal value (zero state. Change of deviation value occurs as a result of destructive processes which occur during service. For estimation of deviation increasing rate in probabilistic sense, was used a difference equation from which, after transformation, Fokker-Planck differential equation was obtained [4, 11]. A particular solution of the equation is deviation increasing rate density function which was used for determining exceedance probability of limit state. The so-determined probability was then used to determine density function of limit state exceedance time, by increasing deviation. Having at disposal the density function of limit state exceedance time one determined service life of a system of maladjustment. In the end, a numerical example based on operational data of selected aircraft [weapon] sights was presented. The elaborated method can be also applied to determining residual life of shipboard devices whose technical state is determined on the basis of analysis of values of diagnostic parameters.

  17. Evaluation of Service Life of Polystyrene in Tropical Marine Environment by Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Dongdong Song

    2015-01-01

    Full Text Available To predict the service life of polystyrene (PS under an aggressive environment, the nondimensional expression Z was established from a data set of multiple properties of PS by principal component analysis (PCA. In this study, PS specimens were exposed to the tropical environment on Xisha Islands in China for two years. Chromatic aberration, gloss, tensile strength, elongation at break, flexural strength, and impact strength were tested to evaluate the aging behavior of PS. Based on different needs of industries, each of the multiple properties could be used to evaluate the service life of PS. However, selecting a single performance variation will inevitably hide some information about the entire aging process. Therefore, finding a comprehensive measure representing the overall aging performance of PS can be highly significant. Herein, PCA was applied to obtain a specific property (Z which can represent all properties of PS. Z of PS degradation showed a slight decrease for the initial two months of exposure after which it increased rapidly in the next eight months. Subsequently, a slower increase of Z value was observed. From the three different stages shown as Z value increases, three stages have been identified for PS service life.

  18. Quality of life in Nepalese patients with low vision and the impact of low vision services

    Directory of Open Access Journals (Sweden)

    Rajendra Gyawali

    2012-10-01

    Conclusions: Low vision patients have poor quality of life as measured with the NEI VFQ-25. Low vision service is associated with improved visual function, better quality of life and high rate of patient satisfaction.

  19. Using life strategies to explore the vulnerability of ecosystem services to invasion by alien plants

    NARCIS (Netherlands)

    Vicente, J.; Pinro, A.; Araujo, M.; Lomba, A.; Randin, C.; Guisan, A.; Honrado, J.; Verburg, P.H.

    2013-01-01

    Invasive plants can have different effects on ecosystem functioning and on the provision of ecosystem services, with the direction and magnitude of such effects depending on the service and ecosystem being considered, but also on the life strategies of the invaders. Strategies can influence

  20. Life extension, power upgrade, and return to service work for Pickering NGS and other PWR and CANDU plants

    International Nuclear Information System (INIS)

    Millman, J.; Idvorian, N.; Schneider, W.

    2002-01-01

    Work on life extension, power upgrade and return to service has been performed and is in progress for a number of PWR and CANDU plants. For PWR plants, power upgrade work has been done for the new replacement steam generators in several cases. This work consists of redoing the formal equipment qualification analysis and reports for the uprated operating conditions to support the application for license adjustment. Life extension assessments have been performed for several CANDU plants. These are highly detailed assessments in which the particular steam generator is reassessed part by part as to the ability of each to sustain full life operation and also extended life operation. Return to service work for Pickering NGSA specifically has included this type of assessment and also specific repair, cleaning and retrofit activities including secondary side inspection, waterlancing, divider plate repair, eddy current inspection, etc. Steam generator modifications and retrofit work have been performed in a number of cases. The paper discusses various life extension, power upgrade, equipment modification and return to service activities all of which are part of the renewed drive in the industry to realise the full potential of nuclear plants by getting more and better performance from the extended service of existing plants. (author)

  1. International Space Station Bacteria Filter Element Post-Flight Testing and Service Life Prediction

    Science.gov (United States)

    Perry, J. L.; von Jouanne, R. G.; Turner, E. H.

    2003-01-01

    The International Space Station uses high efficiency particulate air (HEPA) filters to remove particulate matter from the cabin atmosphere. Known as Bacteria Filter Elements (BFEs), there are 13 elements deployed on board the ISS's U.S. Segment. The pre-flight service life prediction of 1 year for the BFEs is based upon performance engineering analysis of data collected during developmental testing that used a synthetic dust challenge. While this challenge is considered reasonable and conservative from a design perspective, an understanding of the actual filter loading is required to best manage the critical ISS Program resources. Thus testing was conducted on BFEs returned from the ISS to refine the service life prediction. Results from this testing and implications to ISS resource management are discussed. Recommendations for realizing significant savings to the ISS Program are presented.

  2. Influence of flexible pin for planets on service life of wind turbine gearboxes

    International Nuclear Information System (INIS)

    Park, Young Jun; Lee, Geun Ho; Nam, Yong Yun; Kim, Jeong Kil

    2012-01-01

    An overhung mounted carrier with flexible pins is applied to the planetary gear train of a wind turbine gearbox to investigate the influence of the self aligning effect by means of the deflection of the planet spindle and the flexible pin on the lifetime of the planet gear for a wind turbine gearbox. To analyze the load distribution of planet gears, both Euler theory and commercial software are employed. By applying an overhung mounted carrier with flexible pins in the wind turbine gearbox, we can improve the misalignment performance, face load factor, and service life of the planet gears. In particular, it was confirmed that a service life of more than 20 years could be realized for wind turbine gearboxes by applying a flexible pin to overhung mounted carrier

  3. Residential immersive life skills programs for youth with disabilities: service providers' perceptions of change processes.

    Science.gov (United States)

    King, Gillian; McPherson, Amy; Kingsnorth, Shauna; Stewart, Debra; Glencross-Eimantas, Tanya; Jones-Galley, Kimberlea; Morrison, Andrea; Isihi, Ana Maria; Gorter, Jan Willem

    2015-05-01

    Residential immersive life skills (RILS) programs are designed to equip youth with physical disabilities with the foundational life skills required to assume adult roles. The objective was to determine RILS service providers' perceptions of the active ingredients of the intervention change process. Thirty-seven service providers from various disciplines completed measures to assess expertise status and participated in qualitative interviews. Qualitative themes were derived, and similarities and differences in themes were identified for blinded groups of novices, intermediates, and experts. The three main themes, reflecting change processes, were: (a) creating a supportive program atmosphere with multiple opportunities for learning, (b) using strategies to support, encourage, and engage youth, and (c) intentionally fostering youth experiences of skill development, social interaction, and pride in accomplishment. In contrast to the novices, experts displayed a more holistic perspective and paid attention to higher-order issues such as providing opportunities and enabling youth. The findings indicate how RILS service providers work to create a program atmosphere and employ strategies to intentionally foster particular youth experiences. The findings explicate service providers' theories of practice, the intentional design of RILS program environments to bring about client change, and the value of service provider expertise. Implications for Rehabilitation Service providers of youth independence-oriented life skills programs can intentionally create a learning-oriented and supportive program atmosphere by using non-directive, coaching/guiding, and engagement strategies Youth experiences of skill development, shared experience with others, and pride in accomplishment can be cultivated by providing a range of learning opportunities, including choice making, problem-solving, and skill mastery Compared to more novice service providers, experts discussed managing the

  4. Impact of landfill liner time-temperature history on the service life of HDPE geomembranes.

    Science.gov (United States)

    Rowe, R Kerry; Islam, M Z

    2009-10-01

    The observed temperatures in different landfills are used to establish a number of idealized time-temperature histories for geomembrane liners in municipal solid waste (MSW) landfills. These are then used for estimating the service life of different HDPE geomembranes. The predicted antioxidant depletion times (Stage I) are between 7 and 750 years with the large variation depending on the specific HDPE geomembrane product, exposure conditions, and most importantly, the magnitude and duration of the peak liner temperature. The higher end of the range corresponds to data from geomembranes aged in simulated landfill liner tests and a maximum liner temperature of 37 degrees C. The lower end of the range corresponds to a testing condition where geomembranes were immersed in a synthetic leachate and a maximum liner temperature of 60 degrees C. The total service life of the geomembranes was estimated to be between 20 and 3300 years depending on the time-temperature history examined. The range illustrates the important role that time-temperature history could play in terms of geomembrane service life. The need for long-term monitoring of landfill liner temperature and for geomembrane ageing studies that will provide improved data for assessing the likely long-term performance of geomembranes in MSW landfills are highlighted.

  5. Fatigue life prediction of oil ducts under service loads

    Energy Technology Data Exchange (ETDEWEB)

    Meggiolaro, Marco A.; Castro, Jaime T.P. [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil)

    2003-07-01

    A methodology to calculate the residual initiation and propagation lives of fatigue cracks in oil pipelines with corrosion-like defects is proposed and applied to predict the residual life of an old duct made of API 5L Gr. B steel, in service for more than 40 years. Since its inauguration, this pipeline has carried several heated products under variable temperatures and pressures. The calculated (nominal) service stresses are very high, due to thermal loads that induce significant bending in curved parts of the duct, with peaks close to the yield strength of the steel. The elastic- plastic fatigue damage at a notch or a corrosion pit root is calculated using the {epsilon}N method, and the effects of surface semi-elliptical cracks in its internal (or external) wall is studied considering appropriate stress intensity factor expressions and the actual service loads. In the presence of surface flaws associated to stress concentration factors of the order of three, a fatigue crack likely will initiate in the pipeline. However, if these surface cracks are small compared to the duct wall thickness, their predicted propagation rates are very low. (author)

  6. Methodologies for assessment of the service life of pressure tubes in Indian PHWRs

    International Nuclear Information System (INIS)

    Sinha, R.K.; Sharma, A.; Madhusoodanan, K.; Sinha, S.K.; Malshe, U.D.

    1997-01-01

    For estimating safe service life of pressure tubes in Indian PHWRs, analytical methodologies have been developed to evaluate creep deformation, deuterium pick-up rate, blister growth at cold spot, and operating domain required for achieving leak-before-break. The paper provides an overview of these methodologies, and results of some studies carried out towards evolution of proposed fitness-for-service criteria for a pressure tube in contact with its calandria tube. (author)

  7. Recreation as a Related Service: Focusing on the Quality of Life of Students with Disabilities

    Science.gov (United States)

    Diodati, Melissa R.

    2017-01-01

    Leisure participation is influential on the quality of life of individuals. Individuals with disabilities can face barriers in leisure participation, impacting their quality of life. IDEA (2004) recognizes recreation as a related service as one way to enhance the leisure experiences for students with disabilities. The purpose of this embedded case…

  8. Flexible pavement rehabilitation design based on pavement service life time span left

    OpenAIRE

    Gamelyak, I.; Shevchuk, V.

    2005-01-01

    The design of flexible pavement rehabilitation is analysed in terms of durability-cost. A notion of the remaining service life span is described. the model of rehabilitation strategy selection is presented for both design project and operation stages. the results can be used in the pavement management system.

  9. Child life services.

    Science.gov (United States)

    Wilson, Jerriann M

    2006-10-01

    Child life programs have become standard in most large pediatric centers and even on some smaller pediatric inpatient units to address the psychosocial concerns that accompany hospitalization and other health care experiences. The child life specialist focuses on the strengths and sense of well-being of children while promoting their optimal development and minimizing the adverse effects of children's experiences in health care or other potentially stressful settings. Using play and psychological preparation as primary tools, child life interventions facilitate coping and adjustment at times and under circumstances that might prove overwhelming otherwise. Play and age-appropriate communication may be used to (1) promote optimal development, (2) present information, (3) plan and rehearse useful coping strategies for medical events or procedures, (4) work through feelings about past or impending experiences, and (5) establish therapeutic relationships with children and parents to support family involvement in each child's care, with continuity across the care continuum. The benefits of this collaborative work with the family and health care team are not limited to the health care setting; it may also optimize reintegration into schools and the community.

  10. Family Quality of Life: A Key Outcome in Early Childhood Intervention Services--A Scoping Review

    Science.gov (United States)

    Bhopti, Anoo; Brown, Ted; Lentin, Primrose

    2016-01-01

    A scoping review was conducted to identify factors influencing the quality of life of families of children with disability. The review also explored the scales used to measure family quality of life (FQOL) as an outcome in early childhood intervention services (ECIS). Multiple databases were searched from 2000 to 2013 to include studies pertinent…

  11. Quality of life evaluation of workers for diagnostic radiology services

    International Nuclear Information System (INIS)

    Fernandes, Ivani Martins

    2011-01-01

    The main objective of this study was to evaluate the quality of life (QOL) of diagnostic radiology services workers at a hospital of Sao Paulo city. It aimed also to draw the profile of these workers identifying the variables, as its influence on their quality of life. A descriptive exploratory study with qualitative and quantitative approaches was carried out. The data were collected using the questionnaires: the abbreviated instrument for the assessment of the QOL, World Health Organization Quality of Life Instrument bref (WHOQOL-bref) and a questionnaire including the social demographic variables, work conditions and the variables that express the lifestyle of individuals, both questionnaires self-applied. The sample was formed by 118 workers, among them: physicians, technologists/technicians in radiology, nurses, technicians and assistants in nursing, and others health professionals. The data analysis included descriptive statistics, nonparametric tests and the use of a linear regression model. The reliability of the instrument for the studied sample was verified by Cronbach's Alpha Coefficient (α). The WHOQOL-bref proved to be an adequate instrument, with a good level of internal consistency (α=0.884), being easily and quickly administrated for the evaluation of the QOL. The study provided an overview of the perception of quality of life of the studied group. (author)

  12. Leveraging Available Data to Support Extension of Transportation Packages Service Life

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

    2012-06-12

    Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

  13. Leveraging Available Data to Support Extension of Transportation Packages Service Life

    International Nuclear Information System (INIS)

    Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

    2012-01-01

    Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

  14. Shift work to balance everyday life - a salutogenic nursing perspective in home help service in Sweden.

    Science.gov (United States)

    Agosti, Madelaine Törnquist; Andersson, Ingemar; Ejlertsson, Göran; Janlöv, Ann-Christin

    2015-01-01

    Nurses in Sweden have a high absence due to illness and many retire before the age of sixty. Factors at work as well as in private life may contribute to health problems. To maintain a healthy work-force there is a need for actions on work-life balance in a salutogenic perspective. The aim of this study was to explore perceptions of resources in everyday life to balance work and private life among nurses in home help service. Thirteen semi-structured individual interviews and two focus group interviews were conducted with home help service nurses in Sweden. A qualitative content analysis was used for the analyses. In the analyses, six themes of perceptions of recourses in everyday life emerged; (i) Reflecting on life. (ii) Being healthy and taking care of yourself. (iii) Having a meaningful job and a supportive work climate. (iv) Working shifts and part time. (v) Having a family and a supporting network. (vi) Making your home your castle. The result points out the complexity of work-life balance and support that the need for nurses to balance everyday life differs during different phases and transitions in life. In this salutogenic study, the result differs from studies with a pathogenic approach. Shift work and part time work were seen as two resources that contributed to flexibility and a prerequisite to work-life balance. To have time and energy for both private life and work was seen as essential. To reflect on and discuss life gave inner strength to set boundaries and to prioritize both in private life and in work life. Managers in nursing contexts have a great challenge to maintain and strengthen resources which enhance the work-life balance and health of nurses. Salutogenic research is needed to gain an understanding of resources that enhance work-life balance and health in nursing contexts.

  15. Laser shock peening of steam turbine blade for enhanced service life

    Indian Academy of Sciences (India)

    2014-02-13

    Feb 13, 2014 ... study to develop indigenous LSP process for enhanced service life ... DINX10Cr- 0.08–0.13 11.5–12.5 2.2–2.8 0.1–0.5 1.6–1.8 0.6–0.9 0.25–0.4 Balance ... LSP is done by scanning the taped surface of the work piece with a ...

  16. Service life prediction for 50-year-old buildings in marine environments

    Directory of Open Access Journals (Sweden)

    Agustín Sánchez-Deza

    2018-03-01

    Full Text Available Steel reinforcing bars are often coated with rusts formed during service in reinforced concrete (RC structures. Rust layers growing on steel rebars induce expansive stresses and cause cracking on cover concrete. This study uses steel corrosion rate results measured on reinforced concrete buildings of more than 50 years of age located in marine environments and considers the pressure generated by the volume expansion of corrosion product layers to calculate the service life of the RC structures using a numerical simulation, estimating the time to corrosion cracking of the concrete cover. Akaganeite, goethite, lepidocrocite, hematite, magnetite and maghemite were identified by X-ray diffraction as crystalline phase constituents of the rust layers.

  17. The relationship between health literacy and quality of life among frequent users of health care services: a cross-sectional study.

    Science.gov (United States)

    Couture, Éva Marjorie; Chouinard, Maud-Christine; Fortin, Martin; Hudon, Catherine

    2017-07-06

    Although health literacy and quality of life are important concepts in health care, the link between them is unclear, especially for a population of frequent users of health care services with chronic diseases. Low health literacy is a common problem that has been linked to several negative health outcomes. Quality of life is an important health outcome in patient-centered care. Frequent users of health care services are a vulnerable population that deserves attention due to high costs and negative outcomes such as lower quality of life and higher mortality. The objective of this study was to examine the relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services with chronic diseases. This study presents the cross-sectional analysis of data collected through the V1SAGES project, a randomized controlled trial on the effectiveness of a case management intervention in primary care in Quebec, Canada. Participants (n = 247) were frequent users of health care services presenting at least one chronic condition. Health literacy was measured by the Newest Vital Sign (NVS), and the physical and mental components of quality of life were evaluated by the Short Form Health Survey Version 2 (SF-12v2). The association between health literacy (independent variable) and the physical and mental components of quality of life was examined using biserial correlation. No association was found between health literacy and quality of life (physical component: r = 0.108, ρ = 0.11; mental component: r = 0.147, ρ = 0.15). This study suggests that there is no relationship between health literacy and the physical and mental components of quality of life among frequent users of health care services. NCT01719991 . Registered October 25, 2012.

  18. Prediction of pavement remaining service life based on repetition of load and permanent deformation

    Science.gov (United States)

    Usman, R. S.; Setyawan, A.; Suprapto, M.

    2018-03-01

    One of the methods which was applied in the assessment of flexible pavement performance was mechanistic method assuming structures of road pavement to become multi-layer structure for flexible pavement, that the vehicle load working on the pavement layer under repetition with power failure worth 1 (one) unit which was assumed as evenly distributed static load, and therefore the pavement material would provide response in the form of stress, strain, and deflection. This is closely related in order to assess the structure of flexible pavement and to predict the remaining service life on the roads of Pulau Indah sta 0 + 000 to sta. 0 + 845 in Kota Kupang, Nusa Tenggara Timur. The performance appraisal indicator which was used was fatigue cracking happening bottom of the asphalt layer and permanent deformation (rutting) on the surface of subgrade. The strain estimate on the flexible pavement layer structure needs carefulness and high accuracy and therefore a software like KENPAVE which produces horizontal tensile strain of 8,802E-05 and vertical compressive strain of 2,642E-04 was used. By applying equation of The Asphalt Instituteit was obtained repetition of permit load when reaching fatigue cracking (Nf) was 16.071.516 ESAL and permanent deformation (rutting) was 14.703.867 ESAL and also it was predicted the remaining service life of pavement applied the equation of AASTHO 1993 by considering Traffic Multiplier factor (TM 1.8, TM 1.9 and TM 2.0) obtained the remaining life service due to fatigue of 5.51% in the year of 13th (TM 1.8), 7.95% in the year of12th (TM 1.9) and 3.11% (TM 2.0) in the year of 12th, also the remaining service life due to rutting of 4.69% in the year of 12th(TM 1.8), 7.79% in the year of 11th (TM 1.9), and 2.94 in the year of 11th (TM 2.0).

  19. Associations of Quality of Life with Service Satisfaction in Psychotic Patients: A Meta-Analysis

    Science.gov (United States)

    Petkari, Eleni; Pietschnig, Jakob

    2015-01-01

    Background Quality of life (QoL) has gained increasing attention as a desired outcome of psychosocial treatments targeting psychotic patients. Yet, the relationship between the patients’ satisfaction with services and QoL has not been clearly established, perhaps due to the multidimensionality of the QoL concept and the variability in its assessment. Aim This is the first systematic meta-analysis of all available evidence assessing the relationship between QoL and service satisfaction. Methods: In all, 19 studies reporting data of 21 independent samples (N = 5,337) were included in the present meta-analysis. In moderator analyses, effects of age, sex, diagnoses (schizophrenia vs. other psychoses), treatment context (inpatients vs. outpatients), study design (cross-sectional vs. longitudinal), and QoL domain (subjective vs. health-related) were examined. Results Analyses revealed a highly significant medium-sized effect (r = .30, p service satisfaction. Effect sizes were significantly stronger for subjective than health-related quality of life (r = .35 vs. r = .14, respectively). Moreover, associations with subjective QoL remained largely robust when accounting for moderating variables, although there was a trend of stronger associations for outpatients compared to inpatients. In contrast, effect sizes for health-related QoL were small and only observable for samples with longitudinal designs. Conclusion Associations between QoL and service satisfaction appear to be robust but are differentiated in regard to QoL domain. Our findings suggest that agents responsible for service design and implementation need to take the patients’ perception of the service adequacy for achieving QoL enhancement into account. PMID:26275139

  20. Shift work to balance everyday life - a salutogenic nursing perspective in home help service in Sweden

    OpenAIRE

    Agosti, Madelaine T?rnquist; Andersson, Ingemar; Ejlertsson, G?ran; Janl?v, Ann-Christin

    2015-01-01

    Background: Nurses in Sweden have a high absence due to illness and many retire before the age of sixty. Factors at work as well as in private life may contribute to health problems. To maintain a healthy work–force there is a need for actions on work-life balance in a salutogenic perspective. The aim of this study was to explore perceptions of resources in everyday life to balance work and private life among nurses in home help service. Methods: Thirteen semi-structured individual interviews...

  1. Citizen and Resident Satisfaction with Public Services in Qatar : And the impact on quality of life

    OpenAIRE

    Benmansour, Nada Abdelkader , [بن منصور، ندى عبد القادر

    2016-01-01

    In Qatar notable differences in public service satisfaction exist across individual state services, across nationality groupings, and across demographic categories. Among all citizens and residents, however, there is an empirical link between satisfaction with state services and overall perceptions of quality of life. Policymakers should thus study efforts to collect regular and systematic data on the performance of key public institutions, including through the collection of consumer feedbac...

  2. Remediating cultural services in Second Life: The case of Info Island DK

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2009-01-01

    In 2007, Info Island DK was created as a virtual library in Second Life. This is an account of how library services of the physical library and the net library were remediated into a 3-D virtual world. The Info Island DK library was not widely adopted by any of the intended target groups, even if...

  3. Integrating mental health services into primary HIV care for women: the Whole Life project.

    OpenAIRE

    Dodds, Sally; Nuehring, Elane M.; Blaney, Nancy T.; Blakley, Theresa; Lizzotte, Jean-Marie; Lopez, Myriam; Potter, JoNell E.; O'Sullivan, Mary J.

    2004-01-01

    The high rate of mental health problems in HIV-infected women jeopardizes the health of this vulnerable population, and constitutes a mandate for integrating mental health services into HIV primary care. The Whole Life project-a collaboration of the departments of Psychiatry and Obstetrics/Gynecology at the University of Miami School of Medicine-successfully integrated mental health services into primary HIV care for women. This article describes the conceptual framework of the integration, i...

  4. Second life battery energy storage system for residential demand response service

    DEFF Research Database (Denmark)

    Saez-de-Ibarra, Andoni; Martinez-Laserna, Egoitz; Koch-Ciobotaru, Cosmin

    2015-01-01

    vehicles, during their main first life application, for providing residential demand response service. The paper considers the decayed characteristics of these batteries and optimizes the rating of such a second life battery energy storage system (SLBESS) for maximizing the economic benefits of the user......The integration of renewable energies and the usage of battery energy storage systems (BESS) into the residential buildings opens the possibility for minimizing the electricity bill for the end-user. This paper proposes the use of batteries that have already been aged while powering electric......'s energy consumption during a period of one year. Furthermore, simulations were performed considering real data of PV generation, consumption, prices taken from the Spanish market and costs of battery and photovoltaic systems....

  5. Influence of coating quality on the service life of land-based gas turbine blades

    Energy Technology Data Exchange (ETDEWEB)

    Cheruvu, N.S. [Southwest Research Institute, San Antonio (United States)

    2007-06-15

    The land-based gas turbine blades operate at severe operating conditions: higher metal temperatures and stresses, and severe duty cycles. Metallic coatings with or without a top ceramic coating have been used to protect the turbine blades. The durability of the coating system is one of the prime life-limiting factors of modem gas turbine blades. The quality of the coating plays a critical role on the coating life. This paper discusses the failure mechanisms of the coatings and describes how the quality of the coating affects the service life of a gas turbine blade. A few case studies are presented in the paper. (orig.)

  6. The Efficacy of Psychosocial Occupational Therapy Services on Quality of life of Chronic Pschiatric Patents

    Directory of Open Access Journals (Sweden)

    Elaheh Hojjati-Abed

    2010-04-01

    Full Text Available Objective: Quality of life has recently been recognized as an important goal of health care in psychiatry. In this study quality of life of chronic psychiatric patients was evaluated after psychosocial occupational therapy interventions. Materials & Methods: This study is interventional and quasi experimental. Twoenty four chronic mental patients who had refered to SINA Daily Center as intervention group and fifty chronic mental patients as control group were selected by simle and convenient sampling. The instrument was Wisconsin Quality of Life Client Questionnaire that included 8 subscales. Occupational therapy services consisting group therapy, activity therapy and art therapy, according to center’ plane, were performed during 3 months (2 times in week, 90 minutes in each session for intervention group. Independent T test & Paired T test were used for data analysis. Results: There was no significant difference between two groups in parts of QOL before intervention, but after intervention, significant differences were observed in mean scores of satisfaction level, occupational activities, psychological well–being, physical health and total quality o life (P<0.001, also social relation (P=0.005 and economic situation (P=0.003.There was no significant difference between two group in symptoms (P=0.277 and activity of daily living (P=0.020 after intervention. Conclusion: Psychosocial occupational therapy services are effective on satisfaction level and quality of life of chronic psychiatric patients.

  7. Place of Death and Use of Health Services in the Last Year of Life

    OpenAIRE

    Grande, Gunn E.; McKerral, Angela; Addington-Hall, Julia M.; Todd, Chris J.

    2003-01-01

    Aim: To investigate whether health service input in the last year of life differs between cancer patients who die at home versus those dying in inpatient care. Methods: Post hoc exploratory case-control study of 127 home deaths and 200 inpatient deaths. Retrospective electronic record linkage of patients' community and inpatient care during the last year of life. Results: Patients who died at home began their home nursing care closer to death than those who died as inpatients. Their first con...

  8. Childhood adverse life events, disordered eating, and body mass index in US Military service members.

    Science.gov (United States)

    Bakalar, Jennifer L; Barmine, Marissa; Druskin, Lindsay; Olsen, Cara H; Quinlan, Jeffrey; Sbrocco, Tracy; Tanofsky-Kraff, Marian

    2018-03-02

    US service members appear to be at high-risk for disordered eating. Further, the military is experiencing unprecedented prevalence of overweight and obesity. US service members also report a high prevalence of childhood adverse life event (ALE) exposure. Despite consistent links between early adversity with eating disorders and obesity, there is a dearth of research examining the association between ALE exposure and disordered eating and weight in military personnel. An online survey study was conducted in active duty personnel to examine childhood ALE history using the Life Stressor Checklist - Revised, disordered eating using the Eating Disorder Examination - Questionnaire total score, and self-reported body mass index (BMI, kg/m 2 ). Among 179 respondents, multiple indices of childhood ALE were positively associated with disordered eating. Traumatic childhood ALE and subjective impact of childhood ALE were associated with higher BMI and these associations were mediated by disordered eating. Findings support evaluating childhood ALE exposure among service members with disordered eating and weight concerns. Moreover, findings support the need for prospective research to elucidate these relationships. © 2018 Wiley Periodicals, Inc.

  9. Services and Supports, Partnership, and Family Quality of Life: Focus on Deaf-Blindness

    Science.gov (United States)

    Kyzar, Kathleen B.; Brady, Sara E.; Summers, Jean Ann; Haines, Shana J.; Turnbull, Ann P.

    2016-01-01

    In this study, the authors examined the moderating effects of partnership on the relationship between services and supports adequacy and family quality of life (FQOL) for families of children with deaf-blindness ages birth to 21. A social-ecological approach enabled examining the impact of disability on the family system. A survey, consisting of…

  10. Lifetime health effects and medical costs of integrated stroke services - a non-randomized controlled cluster-trial based life table approach

    Directory of Open Access Journals (Sweden)

    Dirks Maaike

    2010-11-01

    Full Text Available Abstract Background Economic evaluation of stroke services indicates that such services may lead to improved quality of life at affordable cost. The present study assesses lifetime health impact and cost consequences of stroke in an integrated service setting. Methods The EDISSE study is a prospective non-randomized controlled cluster trial that compared stroke services (n = 151 patients to usual care (n = 187 patients. Health status and cost trial-data were entered in multi-dimensional stroke life-tables. The tables distinguish four levels of disability which are defined by the modified Rankin scale. Quality-of-life scores (EuroQoL-5D, transition and survival probabilities are based on concurrent Dutch follow-up studies. Outcomes are quality-adjusted life years lived and lifetime medical cost by disability category. An economic analysis compares outcomes from a successful stroke service to usual care, by bootstrapping individual costs and effects data from patients in each arm. Results Lifetime costs and QALYs after stroke depend on age-of-onset of first-ever stroke. Lifetime QALYs after stroke are 2.42 (90% CI - 0.49 - 2.75 for male patients in usual care and 2.75 (-0.61; 6.26 for females. Lifetime costs for men in the usual care setting are €39,335 (15,951; 79,837 and €42,944 (14,081; 95,944 for women. A comparison with the stroke service results in an ICER of €11,685 saved per QALY gained (€14,211 and €7,745 for men and women respectively. This stroke service is with 90% certainty cost-effective. Conclusions Our analysis shows the potential of large health benefits and cost savings of stroke services, taking a lifetime perspective, also in other European settings.

  11. Quality of Life: Domains for Understanding Maths Anxiety in First Year Pre-Service Teachers through Identity Work

    Science.gov (United States)

    Wilson, Sue

    2016-01-01

    Mathematics anxiety in primary pre-service teachers' affects their future teaching of mathematics and achievement of students. Data collected via Critical Incident Technique were used to investigate this anxiety as perceived and identified by first year pre-service teachers. This paper proposes the application of the Quality of Life conceptual…

  12. Effect of corrosion on the fatigue service-life on steel and reinforced concrete beams

    NARCIS (Netherlands)

    Veerman, R.P.; van Breugel, K.; Koenders, E.A.B.

    2015-01-01

    Chloride-induced corrosion is a point of big concern in reinforced concrete (RC) structures. To monitor the actual health and to predict the remaining service-life of structures, it is important to understand the structural behaviour and the failure mechanism of structures exposed to chlorides under

  13. The sustainability effects of Product/Service-System design validated through Life Cycle Assessment

    DEFF Research Database (Denmark)

    Smidt Dreijer, Leise; Birkved, Morten; Howard, Thomas J.

    2013-01-01

    and lifts. The major research question for the case is how the supplier’s continued ownership of the building materials influences the sustainability of such buildings. By using a PSS design approach in the early design stages, the architects involved in the case project were able to make design decisions......Temporary buildings are generally considered to be unsustainable due to a short life span of the materials applied in the building. The construction materials typically have a longer use life than the required use life of the building, thus functioning building materials are often discarded after...... the demolition. In an attempt to improve the sustainability of temporary buildings, a Product/Service-System (PSS) strategy is here applied to a case project. The case project concerns a temporary building made of leased materials and building components such as shipping containers, scaffolding materials...

  14. Comparing the Life Cycle Energy Consumption, Global Warming and Eutrophication Potentials of Several Water and Waste Service Options

    Directory of Open Access Journals (Sweden)

    Xiaobo Xue

    2016-04-01

    Full Text Available Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energy- and carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability and sensitivity were evaluated, the carbon intensity of the local electricity grid and the efficiency of electricity production by the co-digestion with the energy recovery process were the most important for determining the relative global warming potential results.

  15. A Comparison of Quality of Life Outcomes for People with Intellectual Disabilities in Supported Employment, Day Services and Employment Enterprises

    Science.gov (United States)

    Beyer, Stephen; Brown, Tony; Akandi, Rachel; Rapley, Mark

    2010-01-01

    Background: Policy objectives for people with intellectual disabilities include day service modernization and the promotion of paid employment and quality of life. Quality of life is under represented as an outcome measure in vocational research. This research compares subjective and objective quality of life, and quality of work environment for…

  16. A Comparative Assessment of Life-Cycle Greenhouse Gas Emissions from Hypothetical Electric Airport Transportation Services in Thailand

    Science.gov (United States)

    Koiwanit, J.

    2018-05-01

    Global warming is an increase of average temperature in the atmosphere, which causes adverse effects on the environment. Carbon dioxide (CO2) from transportation sector is one of the main contributors of the overall greenhouse gases (GHG). To cope with this issue, electric car services are increasingly seen as popular alternative modes of green transportation especially for urban cities as it is more flexible, more environmentally-friendly, and less expensive than the use of conventional vehicles. The study analyses and compare the hypothetical electric car systems from airport transportation services. Center of Environmental Science of Leiden University (CML) 2001, the Life Cycle Impact Assessment (LCIA) method, is applied to convert life cycle inventory data into environmental impacts. The observed results showed that the electric shuttle bus had the highest impact in global warming potential (GWP) compared to other transportation types. Alternatively, this Life Cycle Assessment (LCA) study that evaluated different transportations provided important information for decision makers on quantifying the differences between each scenario.

  17. The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension

    OpenAIRE

    Neal, Janet Davis

    2000-01-01

    The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension by Janet Davis Neal ABSTRACT Numerous satisfaction studies have been conducted in both tourism and marketing which have examined various aspects of travelers and/or consumers. Quality of life satisfaction studies look beyond the types of satisfaction experiences that endure for only a short time to those that "spill over" into individuals' life domains ...

  18. The Chinese community patient’s life satisfaction, assessment of community medical service, and trust in community health delivery system

    Science.gov (United States)

    2013-01-01

    Background Although the Chinese government put a lot of effort into promoting the community patient’s life satisfaction, there still lacked the holistic and systematic approaches to promote the community patient’s life satisfaction in various regions of China. On the basis of the literature, it was found that both the community patient’s assessment of community medical service and trust in community health delivery system were important considerations when the community patient comprehensively evaluated community medical service to generate life satisfaction. So this study was set up to test whether and to what extent the community patient’s assessments of various major aspects of community medical service/various major aspects of the community patient’s trust in community health delivery system influenced life satisfaction in whole China/in various regions of China. Methods In order to explore the situation of China’s community health delivery system before 2009 and provide a reference for China’s community health delivery system reform, the data that could comprehensively and accurately reflect the community patient’s life satisfaction, assessment of community medical service, and trust in community health delivery system in various regions of China was needed, so this study collaborated with the National Bureau of Statistics of China to carry out a large-scale 2008 national community resident household survey (N = 3,306) for the first time in China. And the specified ordered probit models were established to analyze the dataset from this household survey. Results Among major aspects of community medical service, the medical cost (particularly in developed regions), the doctor-patient communication (particularly in developed regions), the medical facility and hospital environment (particularly in developed regions), and the medical treatment process (particularly in underdeveloped regions) were all key considerations (ppatient’s life

  19. A simple method to prolong the service life of radioactive sources for external radiotherapy.

    Science.gov (United States)

    Xu, Yingjie; Tian, Yuan; Dai, Jianrong

    2014-07-08

    A radioactive source is usually replaced and disposed after being used for a certain amount of time (usually a half-life). In this study, a simple method is proposed to prolong its service life. Instead of replacing the used source with a new source of full activity, a new source of less activity is added in the source holder in front of the used one, so that the total activity of two sources is equal to the initial activity of the used source or even higher. Similarly, more sources can be added to the previous ones. Attenuation of front source(s) to the back source(s) was evaluated with exponential attenuation equation, and variation of source-focus distance (SFD) with inverse square law for Leksell 4C Gamma Knife, which served as an example of external radiotherapy units. When the number of front sources increased from 1 to 3, the relative air kerma decreased from 36.5% to 5.0%. Both the attenuation effect and SFD variation contributed to the decrease in air kerma, with the former being the major factor. If the height of the source can be decreased in some way, such as increasing the specific activity of sources, the sources can be used more efficiently. The method prolongs the service life of sources by several factors, and reduces the expense of source exchange and reclamation.

  20. The Interrelation of Prayer and Worship Service Attendance in Moderating the Negative Impact of Life Event Stressors on Mental Well-Being.

    Science.gov (United States)

    Rainville, G

    2017-09-13

    The interrelation of worship service attendance and private prayer in moderating the negative impact of life event stressors on mental well-being is examined using hierarchical multiple regressions on a national sample of 2601 Americans. A theoretical model is proposed in which stressful life events are made less distressing under conditions in which exposure to pro-social content at worship services is internalized through frequent private prayer. Interactive models controlling for a block of potential confounds are run to confirm that the stress-moderating effects of worship service attendance are noted only when attendance is complemented by relatively frequent engagement in private prayer.

  1. Replacement of major nuclear power plant components for service life extension

    International Nuclear Information System (INIS)

    Novak, S.

    1987-01-01

    Problems are discussed associated with replacement of nuclear power plant components with the aim to extend their original scheduled life. The existing foreign experience shows that it is technically feasible to replace practically all basic components for which the necessity of replacement is established. Data is summed up on the replacement of steam generators in US and West German nuclear power plants showing the duration of the job, the total consumption of manhours, the collective dose equivalent and the cost. Attention is also focused on implemented and projected replacements of circulation pipes in nuclear power plants abroad. Based on these figures, the cost is estimated of the replacement of the reactor vessel and the steam generators for WWER-440 nuclear power plants. The conclusion is arrived at that even based on a conservative estimate, the extension by 20 years of the service life of a nuclear power plant is economically more effective than the construction of a new plant. (Z.M.) 2 tabs., 15 refs., 3 figs

  2. The relationship between childhood poverty, military service, and later life depression among men: Evidence from the Health and Retirement Study.

    Science.gov (United States)

    Bareis, Natalie; Mezuk, Briana

    2016-12-01

    Childhood poverty has been associated with depression in adulthood, but whether this relationship extends to later life major depression (MD) or is modified by military service is unclear. Data come from the Health and Retirement Study (HRS) 2010 wave, a longitudinal, nationally representative study of older adults. Men with data on military service and childhood poverty were included (N=6330). Childhood poverty was assessed by four indicators (i.e., parental unemployment, residential instability) experienced before age 16. Military service was categorized as veteran versus civilian, and during draft versus all-volunteer (after 1973) eras. Past year MD was defined by the Composite International Diagnostic Inventory. Four in ten men ever served, with 13.7% in the all-volunteer military. Approximately 12% of civilians, 8% draft era and 24% all-volunteer era veterans had MD. Childhood poverty was associated with higher odds of MD (Odds Ratio (OR): 2.38, 95% Confidence Interval (CI): 1.32-4.32) and higher odds of military service (OR: 2.58, 95% CI: 1.58-4.21). Military service was marginally associated with MD (OR: 1.28, 95% CI: 0.98-1.68) and did not moderate the association between childhood poverty and MD. Self-report data is subject to recall bias. The HRS did not assess childhood physical and emotional abuse, or military combat exposure. Men raised in poverty had greater odds of draft and all-volunteer military service. Early-life experiences, independent of military service, appear associated with greater odds of MD. Assessing childhood poverty in service members may identify risk for depression in later life. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Estimation of the temporary service life of DC arc plasmatron cathode

    Science.gov (United States)

    Kulygin, V. M.; Pereslavtsev, A. V.; Tresvyatskii, S. S.

    2017-09-01

    The service life of the cathode of a DC arc plasmatron continuously working with tubular electrodes that operate in the air has been considered using the semi-phenomenological approach. The thermal emission, that ensures the necessary flow of electrons, and the evaporation of the cathode material, which determines its erosion, have been taken as the basic physical phenomena that constitute the workflow. The relationships that enable the estimation of the cathode's operating time have been obtained using the known regularities of these phenomena and experimental data available in the literature. The resulting evaluations coincide satisfactorily with the endurance test results.

  4. Harm reduction services as a point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs: a qualitative analysis.

    Science.gov (United States)

    McNeil, Ryan; Guirguis-Younger, Manal; Dilley, Laura B; Aubry, Tim D; Turnbull, Jeffrey; Hwang, Stephen W

    2012-05-17

    Homeless and marginally housed persons who use alcohol and/or illicit drugs often have end-of-life care needs that go unmet due to barriers that they face to accessing end-of-life care services. Many homeless and marginally housed persons who use these substances must therefore rely upon alternate sources of end-of-life care and support. This article explores the role of harm reduction services in end-of-life care services delivery to homeless and marginally housed persons who use alcohol and/or illicit drugs. A qualitative case study design was used to explore end-of-life care services delivery to homeless and marginally housed persons in six Canadian cities. A key objective was to explore the role of harm reduction services. 54 health and social services professionals participated in semi-structured qualitative interviews. All participants reported that they provided care and support to this population at end-of-life. Harm reduction services (e.g., syringe exchange programs, managed alcohol programs, etc.) were identified as a critical point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs. Where possible, harm reduction services facilitated referrals to end-of-life care services for this population. Harm reduction services also provided end-of-life care and support when members of this population were unable or unwilling to access end-of-life care services, thereby improving quality-of-life and increasing self-determination regarding place-of-death. While partnerships between harm reduction programs and end-of-life care services are identified as one way to improve access, it is noted that more comprehensive harm reduction services might be needed in end-of-life care settings if they are to engage this underserved population.

  5. On the need for data for the verification of service life models for frost damage

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Engelund, Sven

    1999-01-01

    The purpose of this paper is to draw the attention to the need for the verification of service life models for frost attack on concrete and the collection of relevant data. To illustrate the type of data needed the paper presents models for internal freeze/thaw damage (internal cracking including...

  6. Visual impairment, coping strategies and impact on daily life: a qualitative study among working-age UK ex-service personnel.

    Science.gov (United States)

    Stevelink, Sharon A M; Malcolm, Estelle M; Fear, Nicola T

    2015-11-12

    Sustaining a visual impairment may have a substantial impact on various life domains such as work, interpersonal relations, mobility and social and mental well-being. How to adjust to the loss of vision and its consequences might be a challenge for the visually impaired person. The purpose of the current study was to explore how younger male ex-Service personnel cope with becoming visually impaired and how this affects their daily life. Semi-structured interviews with 30 visually impaired male ex-Service personnel, all under the age of 55, were conducted. All participants are members of the charity organisation Blind Veterans UK. Interviews were analysed thematically. Younger ex-Service personnel applied a number of different strategies to overcome their loss of vision and its associated consequences. Coping strategies varied from learning new skills, goal setting, integrating the use of low vision aids in their daily routine, to social withdrawal and substance misuse. Vision loss affected on all aspects of daily life and ex-Service personnel experienced an on-going struggle to accept and adjust to becoming visually impaired. Health care professionals, family and friends of the person with the visual impairment need to be aware that coping with a visual impairment is a continuous struggle; even after a considerable amount of time has passed, needs for emotional, social, practical and physical support may still be present.

  7. Perceived stress and life satisfaction: social network service use as a moderator.

    Science.gov (United States)

    Niu, Qikun; Liu, Yihao; Sheng, Zitong; He, Yue; Shao, Xiaolin

    2011-01-01

    Social Network Service (SNS) has become a buzzword in recent media coverage with the development of the second generation of Web-based communities. In China, SNS has played an increasingly important role in its users' daily lives, especially among students. With a sample of 471 college students, we tested the direct relationship between perceived stress and life satisfaction using a regression analysis. Moreover, we found SNS use could buffer the negative effect of perceived stress. This study has practical implications on Internet users' SNS use.

  8. End of Life: An Overview

    Science.gov (United States)

    Toner, Mary Ann; Shadden, Barbara B.

    2012-01-01

    Speech-language pathologists (SLPs) provide services to patients confronting the end of life (EOL) in a variety of settings. Instead of targeting improvement of health or sustaining life, EOL services focus primarily on quality of life. Although SLPs may not consider themselves core members of the health care team providing EOL services, the…

  9. Colil: a database and search service for citation contexts in the life sciences domain.

    Science.gov (United States)

    Fujiwara, Toyofumi; Yamamoto, Yasunori

    2015-01-01

    To promote research activities in a particular research area, it is important to efficiently identify current research trends, advances, and issues in that area. Although review papers in the research area can suffice for this purpose in general, researchers are not necessarily able to obtain these papers from research aspects of their interests at the time they are required. Therefore, the utilization of the citation contexts of papers in a research area has been considered as another approach. However, there are few search services to retrieve citation contexts in the life sciences domain; furthermore, efficiently obtaining citation contexts is becoming difficult due to the large volume and rapid growth of life sciences papers. Here, we introduce the Colil (Comments on Literature in Literature) database to store citation contexts in the life sciences domain. By using the Resource Description Framework (RDF) and a newly compiled vocabulary, we built the Colil database and made it available through the SPARQL endpoint. In addition, we developed a web-based search service called Colil that searches for a cited paper in the Colil database and then returns a list of citation contexts for it along with papers relevant to it based on co-citations. The citation contexts in the Colil database were extracted from full-text papers of the PubMed Central Open Access Subset (PMC-OAS), which includes 545,147 papers indexed in PubMed. These papers are distributed across 3,171 journals and cite 5,136,741 unique papers that correspond to approximately 25 % of total PubMed entries. By utilizing Colil, researchers can easily refer to a set of citation contexts and relevant papers based on co-citations for a target paper. Colil helps researchers to comprehend life sciences papers in a research area more efficiently and makes their biological research more efficient.

  10. Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service

    Directory of Open Access Journals (Sweden)

    Scheffer Gert J

    2010-03-01

    Full Text Available Abstract Background To determine the advanced life support procedures provided by an Emergency Medical Service (EMS and a Helicopter Emergency Medical Service (HEMS for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures restricted to the HEMS-physician and procedures for which the HEMS is more experienced than the EMS. Methods Prospective study of a consecutive group of children examined and treated by the HEMS of the eastern region of the Netherlands. Data regarding type of emergency, physiological parameters, NACA scores, treatment, and 24-hour survival were collected and subsequently analysed. Results Of the 558 children examined and treated by the HEMS on scene, 79% had a NACA score of IV-VII. 65% of the children had one or more advanced life support procedures restricted to the HEMS and 78% of the children had one or more procedures for which the HEMS is more experienced than the EMS. The HEMS intubated 38% of all children, and 23% of the children intubated and ventilated by the EMS needed emergency correction because of potentially lethal complications. The HEMS provided the greater part of intraosseous access, as the EMS paramedics almost exclusively reserved this procedure for children in cardiopulmonary resuscitation. The EMS provided pain management only to children older than four years of age, but a larger group was in need of analgesia upon arrival of the HEMS, and was subsequently treated by the HEMS. Conclusions The Helicopter Emergency Medical Service of the eastern region of the Netherlands brings essential medical expertise in the field not provided by the emergency medical service. The Emergency Medical Service does not provide a significant quantity of procedures obviously needed by the paediatric patient.

  11. The eSourcing Capability Model for Service Providers: Knowledge Manage-ment across the Sourcing Life-cycle

    OpenAIRE

    Laaksonen, Pekka

    2011-01-01

    Laaksonen, Pekka The eSourcing Capability Model for Service Providers: Knowledge Manage-ment across the Sourcing Life-cycle Jyväskylä: Jyväskylän yliopisto, 2011, 42 s. Tietojärjestelmätiede, kandidaatintutkielma Ohjaaja(t): Käkölä, Timo Tässä kandidaatintutkielmassa selvitettiin sitä, miten the eSourcing Capability Model for Service Providers-mallin käytännöt (practices) ovat liittyneet tietä-myksenhallinnan neljään prosessiin: tiedon luominen, varastointi/noutaminen, jakamine...

  12. Adverse psychosocial working conditions and poor quality of life among financial service employees in Brazil.

    Science.gov (United States)

    Silva, Luiz Sergio; Barreto, Sandhi Maria

    2012-01-01

    Workers in the financial services sector are exposed to great stress at work. This study investigates whether exposure to adverse psychosocial work conditions is independently associated with poor health-related physical and mental quality of life among financial services workers. We studied a nationwide representative sample of 2,054 workers of a large Brazilian state bank in 2008. Adverse psychosocial work conditions were investigated by the Effort-reward imbalance (ERI) scale and the Job content questionnaire (JCQ). Health-related quality of life (HRQL) was assessed using the Medical Outcomes Study Short-Form General Health Survey (SF-12). Poor mental and physical HRQL was defined by the lowest quartiles of the SF-12 final score distributions. Associations were investigated using multiple logistic regression analysis. In the multivariate analysis, exposures to low control and lack of social support at work (JCQ) were associated with poor HRQL in the physical domain. Increasing effort-reward imbalance and overcommitment (ERI), on the other hand, were associated with poor HRQL in the mental domain, with a significant statistical trend. Overcommitment was also associated with poor physical HRQL. The results suggest that exposure to adverse psychosocial work conditions has a negative impact on both domains of HRQL among financial service workers. They also indicate that ERI and DC models capture different aspects of job strain.

  13. Should the service life of nuclear power plants be limited for technical reasons?

    International Nuclear Information System (INIS)

    Schomer, E.

    1995-01-01

    German nuclear power plant operating licenses take into account the fact that the design lifetime of the facilities is 40 years. The technological lifetime, however, is governed by actual ageing processes and operational burden. The service life of nuclear power plants can be extended by replacement of the steam generator and by repair or replacement of the reactor pressure vessel or parts thereof. Attention is also paid to the reactor protection systems. (J.B.). 8 figs

  14. Effect of the Length of Traffic Flow Records on the Estimate of a Bridge Service Life

    Directory of Open Access Journals (Sweden)

    Krejsa Jan

    2016-12-01

    Full Text Available The service life of bridges is significantly affected by fatigue of used material induced by heavy vehicles. Therefore, precise determination of the vehicle weight is of crucial importance for the calculation of fatigue damage and the prediction of the bridge serviceability. This paper investigates accuracy of the determination of fatigue depending on the length of traffic flow recording. The presented data were obtained from the measurements carried out on a bridge of the Prague Highway Ring. The analysis reveals that the optimal length of traffic recording is about 30 days.

  15. Viscoelastic response of HTPB based solid fuel to horizontal and vertical storage slumping conditions and it's affect on service life

    International Nuclear Information System (INIS)

    Nawaz, Q.; Nizam, F.

    2011-01-01

    Frequent use of solid fuels as thrust generating energy source in modern day space vehicle systems has created a need to assess their serviceability for long term storage under various conditions. Solid fuel grain, the most important part of any solid fuel system, responds visco elastically to any loading condition. For the assessment of the service life of any solid fuel system, the solid fuel grain has to be structurally evaluated in applied storage conditions. Structural integrity of the grain is exceptionally significant to guarantee the successful operation of the solid fuel system. In this work, numerical simulations have been performed to assess the mechanical stresses and strains induced in an HTPB based solid fuel grain during service life employing ABAQUS standard FEA software using 4-node bilinear quadrilateral elements. For finite element analysis (FEA), typical 2-D and p/nth axisymmetric section of 5-point (n) star grain geometry is considered. Mechanical loads include the horizontal or vertical 1-g (solid fuel weight) storage condition. The simulation results are compared with the analytical results for the same grain geometry. Analytically measured slump deflections in grain segment at various storage times have been found in good relation with the FEA based simulation results. This proves the validity of the procedure adopted and is helpful in assessment of the service life of solid fuel systems. (author)

  16. Internal curing as a new tool for infrastructural renewal : reducing repair congestion, increasing service life, and improving sustainability.

    Science.gov (United States)

    2014-04-01

    Internal curing has recently been developed as a new concrete technology that has the potential to : dramatically extend the service life of concrete infrastructure elements like bridge decks. Internal curing : uses prewetted lightweight aggregate in...

  17. Design and analysis of seals for extended service life

    Science.gov (United States)

    Bower, Mark V.

    1992-01-01

    Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  18. Acceptance towards Goods and Services Tax (GST and Quality of Life: Antecedent and outcome using partial least square method

    Directory of Open Access Journals (Sweden)

    Arlinah Abd Rashid

    2016-06-01

    Full Text Available The good and service tax (GST in Malaysia was implemented in 2015 as a tax reform program to generate a stable source of revenue. This study explores the respondents’ behaviour towards GST, a week post-implementation. The partial least square (PLS modelling was used to establish the relationship between acceptance, knowledge and feelings towards GST as well as the household quality of life. There is a positive relationship between the antecedents and the quality of life. Acceptance of GST exerts a significant relationship towards feelings and quality of life. The study concludes that Malaysians, in general, accept GST that ensures a better quality of life in the future.

  19. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...... IPDs with regard to longevity and adaptability. CONCLUSION The new type of service-focused IPD and the related life-cycle responsibility (development, building phase, maintenance and dismantling/adaption/recycling) creates incentive to integrate life cycle thinking into the development process of IPDs......, resulting in more sustainable building solutions with a greater extend of positive environmental, economical and social impacts. The research presented will also show the importance of adaption and configuration of these complex building components by architects and planners, as they will have a great...

  20. Influence of service life on Life Cycle Assessments

    NARCIS (Netherlands)

    van Nunen, H.; Hendriks, N.A.; Erkelens, P.A.

    2003-01-01

    Environmental assessment is part of present decision making. But, because of difficulties the assessments are not as profound as could be. Life Cycle Assessment (LCA) is a cradle-to-grave approach and consequently a time factor is embedded. Until now this time factor is fixed and calculations are

  1. Health-Related Quality of Life: Expanding a Conceptual Framework to Include Older Adults Who Receive Long-Term Services and Supports

    Science.gov (United States)

    Zubritsky, Cynthia; Abbott, Katherine M.; Hirschman, Karen B.; Bowles, Kathryn H.; Foust, Janice B.; Naylor, Mary D.

    2013-01-01

    For older adults receiving long-term services and supports (LTSS), health-related quality of life (HRQoL) has emerged as a critical construct to examine because of its focus on components of well-being, which are affected by progressive changes in health status, health care, and social support. HRQoL is a health-focused quality of life (QOL)…

  2. Recruitment, soldiers and the experience of army life: compulsory military service in Peru and Colombia (1919-1933

    Directory of Open Access Journals (Sweden)

    Carlos Camacho Arango

    2018-05-01

    Full Text Available The article studies different aspects of mandatory military service in Peru and Colombia from 1919 to 1933 including recruitment; the social, “racial”, and geographical origins of soldiers; and army life in both countries. Documents from military archives in the U.S. and France, as well as writings from Peruvian and Colombian commissioned and non-commissioned officers were the main sources used. The method is comparative and it shows clear features in common, including the scarcity of resources that affected all aspects of service.

  3. Accounting for ecosystem services in Life Cycle Assessment, Part II: toward an ecologically based LCA.

    Science.gov (United States)

    Zhang, Yi; Baral, Anil; Bakshi, Bhavik R

    2010-04-01

    Despite the essential role of ecosystem goods and services in sustaining all human activities, they are often ignored in engineering decision making, even in methods that are meant to encourage sustainability. For example, conventional Life Cycle Assessment focuses on the impact of emissions and consumption of some resources. While aggregation and interpretation methods are quite advanced for emissions, similar methods for resources have been lagging, and most ignore the role of nature. Such oversight may even result in perverse decisions that encourage reliance on deteriorating ecosystem services. This article presents a step toward including the direct and indirect role of ecosystems in LCA, and a hierarchical scheme to interpret their contribution. The resulting Ecologically Based LCA (Eco-LCA) includes a large number of provisioning, regulating, and supporting ecosystem services as inputs to a life cycle model at the process or economy scale. These resources are represented in diverse physical units and may be compared via their mass, fuel value, industrial cumulative exergy consumption, or ecological cumulative exergy consumption or by normalization with total consumption of each resource or their availability. Such results at a fine scale provide insight about relative resource use and the risk and vulnerability to the loss of specific resources. Aggregate indicators are also defined to obtain indices such as renewability, efficiency, and return on investment. An Eco-LCA model of the 1997 economy is developed and made available via the web (www.resilience.osu.edu/ecolca). An illustrative example comparing paper and plastic cups provides insight into the features of the proposed approach. The need for further work in bridging the gap between knowledge about ecosystem services and their direct and indirect role in supporting human activities is discussed as an important area for future work.

  4. Fee-for-service cancer rehabilitation programs improve health-related quality of life.

    Science.gov (United States)

    Kirkham, A A; Neil-Sztramko, S E; Morgan, J; Hodson, S; Weller, S; McRae, T; Campbell, K L

    2016-08-01

    Rigorously applied exercise interventions undertaken in a research setting result in improved health-related quality of life (hrqol) in cancer survivors, but research to demonstrate effective translation of that research to practice is needed. The objective of the present study was to determine the effect of fee-for-service cancer rehabilitation programs in the community on hrqol and on self-reported physical activity and its correlates. After enrolment and 17 ± 4 weeks later, new clients (n = 48) to two fee-for-service cancer rehabilitation programs completed the 36-Item Short Form Health Survey (rand-36: rand Corporation, Santa Monica, CA, U.S.A.), the Godin Leisure-Time Exercise Questionnaire, and questions about physical activity correlates. Normal fee-for-service operations were maintained, including a fitness assessment and individualized exercise programs supervised in a group or one-on-one setting, with no minimum attendance required. Fees were associated with the assessment and with each exercise session. Of the 48 participants, 36 (75%) completed both questionnaires. Improvements in the physical functioning, role physical, pain, and energy/fatigue scales on the rand-36 exceeded minimally important differences and were of a magnitude similar to improvements reported in structured, rigorously applied, and free research interventions. Self-reported levels of vigorous-intensity (p = 0.021), but not moderate-intensity (p = 0.831) physical activity increased. The number of perceived barriers to exercise (p = 0.035) and the prevalence of fatigue as a barrier (p = 0.003) decreased. Exercise self-efficacy improved only in participants who attended 11 or more sessions (p = 0.002). Exercise enjoyment did not change (p = 0.629). Enrolment in fee-for-service cancer rehabilitation programs results in meaningful improvements in hrqol comparable to those reported by research interventions, among other benefits. The fee-for-service model could be an effective model for

  5. Analytical Method to Estimate Fatigue Life Time Duration in Service for Runner Blade Mechanism of Kaplan Turbines

    Directory of Open Access Journals (Sweden)

    Ana – Maria Budai

    2010-10-01

    Full Text Available The paper present an analytical method that can be used to determianted fatigue life time duration in service for runner blade mechanism of Kaplan turbines. The study was made for lever button of runer blade mechanism using two analytical relation to calculate the maximum number of stress cycles whereupon the mechanism work without any damage. To estimate fatigue life time duration will be used a formula obtained from one of most comon cumulative damage methodology taking in consideration the real exploatation conditions of a specified Kapaln turbine.

  6. Durapgulf, a local service life model for the durability of concrete structures in the South of Iran

    International Nuclear Information System (INIS)

    Shekarchi, M.; Ghods, P.; Alizadeh, R.; Chini, M.; Hoseini, M.

    2008-01-01

    Reinforced concrete structures were widely constructed in the south of Iran for the infrastructures of ports and oil exploration. Unfortunately, the deterioration of concrete structures in this marine area, which is mainly due to the chloride-induced corrosion of rebars in concrete, imposes hundreds of millions dollars of repair cost every year. During the last decades, extensive studies have been conducted to evaluate the effect of different parameters on chloride diffusion into concrete, corrosion initiation, and its propagation. In order to predict the time required for various steps of the corrosion phenomena, many numerical models have been developed. In this paper, development of Durapgulf (a service of life design model), which can predict the corrosion initiation of reinforced concrete (RC) structures in the south of Iran, is described and also the application of this model for service life design of RC structures is demonstrated in a hypothetical example and verified with other experimental results in this region. (author)

  7. Notch fatigue crack propagation - A consistent concept for calculating flawed service life

    International Nuclear Information System (INIS)

    Dankert, M.

    1999-01-01

    The research report presents a consistent concept of elastic-plastic fatigue fracture mechanics, to be used for numerical description of crack initiation and propagation behaviour within and out of notched areas of circular notched specimens for Woehler tests, two-phase fatigue tests and tests under service conditions. It is shown that a fracture-mechanics approach yields results capable of describing the load history over the whole service life of a structural member. A J-integral-related crack propagation model is derived that takes into account the crack opening and closure behaviour. The model is based on specially developed formulas, algorithms and approximation formulas required for description of crack opening and closure behaviour as well as calculation of the stress intensity factor K and the J-integral of cracks at notches. The values relating to crack opening were compared with experimental data, and those describing the stress intensity factor K and the J-integrals with 2D and 3D elastic-plastic FE calculations. Good and very good agreement of results was achieved. (orig./CB) [de

  8. Effect of Climate Change on Service Life of High Volume Fly Ash Concrete Subjected to Carbonation—A Korean Case Study

    Directory of Open Access Journals (Sweden)

    Ki-Bong Park

    2017-01-01

    Full Text Available The increase in CO2 concentrations and global warming will increase the carbonation depth of concrete. Furthermore, temperature rise will increase the rate of corrosion of steel rebar after carbonation. On the other hand, compared with normal concrete, high volume fly ash (HVFA concrete is more vulnerable to carbonation-induced corrosion. Carbonation durability design with climate change is crucial to the rational use of HVFA concrete. This study presents a probabilistic approach that predicts the service life of HVFA concrete structures subjected to carbonation-induced corrosion resulting from increasing CO2 concentrations and temperatures. First, in the corrosion initiation stage, a hydration-carbonation integration model is used to evaluate the contents of the carbonatable material, porosity, and carbonation depth of HVFA concrete. The Monte Carlo method is adopted to determine the probability of corrosion initiation. Second, in the corrosion propagation stage, an updated model is proposed to evaluate the rate of corrosion, degree of corrosion for cover cracking of concrete, and probability of corrosion cracking. Third, the whole service life is determined considering both corrosion initiation stage and corrosion propagation stage. The analysis results show that climate change creates a significant impact on the service life of durable concrete.

  9. Transition from children's to adult services for young adults with life-limiting conditions: A realist review of the literature.

    Science.gov (United States)

    Kerr, Helen; Price, Jayne; Nicholl, Honor; O'Halloran, Peter

    2017-11-01

    Improvements in care and treatment have led to more young adults with life-limiting conditions living beyond childhood, which means they must make the transition from children's to adult services. This has proved a challenging process for both young adults and service providers, with complex transition interventions interacting in unpredictable ways with local contexts. To explain how intervention processes interact with contextual factors to help transition from children's to adult services for young adults with life-limiting conditions. Systematic realist review of the literature. Literature was sourced from four electronic databases: Embase, MEDLINE, Science Direct and Cochrane Library from January 1995 to April 2016. This was supplemented with a search in Google Scholar and articles sourced from reference lists of included papers. Data were extracted using an adapted standardised data extraction tool which included identifying information related to interventions, mechanisms, contextual influences and outcomes. Two reviewers assessed the relevance of papers based on the inclusion criteria. Methodological rigor was assessed using the relevant Critical Appraisal Skills Programme tools. 78 articles were included in the review. Six interventions were identified related to an effective transition to adult services. Contextual factors include the need for children's service providers to collaborate with adult service providers to prepare an environment with knowledgeable staff and adequate resources. Mechanisms triggered by the interventions include a sense of empowerment and agency amongst all stakeholders. Early planning, collaboration between children's and adult service providers, and a focus on increasing the young adults' confidence in decision-making and engaging with adult services, are vital to a successful transition. Interventions should be tailored to their context and focused not only on organisational procedures but on equipping young adults, parents

  10. Supporting family carers providing end-of-life home care: a qualitative study on the impact of a hospice at home service.

    Science.gov (United States)

    Jack, Barbara A; O'Brien, Mary R; Scrutton, Joyce; Baldry, Catherine R; Groves, Karen E

    2015-01-01

    To explore bereaved family carers' perceptions and experiences of a hospice at home service. The increasing demand for the development of home-based end-of-life services is not confined to the western world; such services are also emerging in resource-poor countries where palliative care services are developing with limited inpatient facilities. Despite this growing trend, studies show a variety of interrelated factors, with an emphasis on the availability of informal carers and their ability to cope, which can influence whether terminally ill patients actually remain at home. A hospice at home service was developed to meet patients' and families' needs by providing individually tailored resources. A qualitative study. Data were collected by semi-structured, digitally recorded interviews from 20 family carers who had experienced the service. Interviews were transcribed verbatim and a thematic approach adopted for analysis. All participants reported a personal positive impact of the service. Family carers commented the service provided a valued presence, they felt in good hands and importantly it helped in supporting normal life. The impact of an individualised, targeted, hospice at home service using dedicated, palliative care trained, staff, is perceived positively by family carers and importantly, supportive of those with additional caring or employment commitments. The emergence of hospice at home services has resulted in more options for patients and their families, when the increased amount of care a family member has to provide in these circumstances needs to be adequately supported, with the provision of a flexible service tailored to individual needs and delivered by appropriately trained staff. © 2014 The Authors. Journal of Clinical Nursing Published by John Wiley & Sons Ltd.

  11. Effects of Crack and Climate Change on Service Life of Concrete Subjected to Carbonation

    Directory of Open Access Journals (Sweden)

    Xiao-Yong Wang

    2018-04-01

    Full Text Available Carbonation is among the primary reasons for the initiation of the corrosion of steel rebar in reinforced concrete (RC structures. Due to structural loading effects and environmental actions, inevitable cracks have frequently occurred in concrete structures since the early ages. Additionally, climate change, which entails increases in CO2 concentration and environmental temperature, will also accelerate the carbonation of concrete. This article presents an analytical way of predicting the service life of cracked concrete structures considering influences of carbonation and climate change. First, using a hydration model, the quantity of carbonatable materials and concrete porosity were calculated. Carbonation depth was evaluated considering properties of concrete materials and environmental conditions. Second, the influence of cracks on CO2 diffusivity was examined. Carbonation depth for cracked concrete was evaluated using equivalent CO2 diffusivity. The effects of climate change, for example, growing CO2 concentration and environmental temperature, were considered using different schemes of carbonation models. Third, different climate change scenarios (such as Representative Concentration Pathways (RCP 2.6, RCP 4.5, RCP 8.5 and upper 90% confidence interval of RCP 8.5 and time slices (such as 2000 and 2050 were used for case studies. By utilizing the Monte Carlo method, the influences of various climate change scenarios on the service life loss of concrete structures were highlighted.

  12. NASA's Evolutionary Xenon Thruster (NEXT) Project Qualification Propellant Throughput Milestone: Performance, Erosion, and Thruster Service Life Prediction After 450 kg

    Science.gov (United States)

    Herman, Daniel A.

    2010-01-01

    The NASA s Evolutionary Xenon Thruster (NEXT) program is tasked with significantly improving and extending the capabilities of current state-of-the-art NSTAR thruster. The service life capability of the NEXT ion thruster is being assessed by thruster wear test and life-modeling of critical thruster components, such as the ion optics and cathodes. The NEXT Long-Duration Test (LDT) was initiated to validate and qualify the NEXT thruster propellant throughput capability. The NEXT thruster completed the primary goal of the LDT; namely to demonstrate the project qualification throughput of 450 kg by the end of calendar year 2009. The NEXT LDT has demonstrated 28,500 hr of operation and processed 466 kg of xenon throughput--more than double the throughput demonstrated by the NSTAR flight-spare. Thruster performance changes have been consistent with a priori predictions. Thruster erosion has been minimal and consistent with the thruster service life assessment, which predicts the first failure mode at greater than 750 kg throughput. The life-limiting failure mode for NEXT is predicted to be loss of structural integrity of the accelerator grid due to erosion by charge-exchange ions.

  13. Comparing the Life Cycle Energy Consumption, Global Warming and Eutrophication Potentials of Several Water and Waste Service Options

    Science.gov (United States)

    Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG...

  14. Quality of working life and workload in home help services: a review of the literature and a proposal for a research model.

    NARCIS (Netherlands)

    Arts, S.E.J.; Kerkstra, A.; Zee, J. van der; Huyer Abu-Saad, H.

    2001-01-01

    In this literature review, several models for quality of working life and workload appropriate for home help services are presented. The aim was to develop a model for assessing the psychological and physical outcomes of working in home help services. Although the models described in this review

  15. NPP component maintenance and life management in Russia

    International Nuclear Information System (INIS)

    Tutnov, I.; Lyssakov, V.

    2002-01-01

    This report represents the conceptual strategies (ideas) on life management programs for nuclear power plants. Use of the optimum programs for NPP's NDE, maintenance service, operation and service life can provide the best economic benefit for the utilities. The paper presents general approaches to life management, maintenance service, and risks of operating and service life of NPPs in Russia. The report offers some optimized ways for the solution of these important tasks

  16. Steam generator life management

    International Nuclear Information System (INIS)

    King, P.; McGillivray, R.; Reinhardt, W.; Millman, J.; King, B.; Schneider, W.

    2003-01-01

    'Full-Text:' Steam Generator Life Management responsibility embodies doing whatever is necessary to maintain the steam generation equipment of a nuclear plant in effective, reliable service. All comes together in that most critical deliverable, namely the submission of the documentation which wins approval for return to service after an outage program. Life management must address all aspects of SG reliability over the life of the plant. Nevertheless, the life management activities leading up to return to service approval is where all of it converges. Steam Generator Life Management activities entail four types of work, all equally important in supporting the objective of successful operation. These activities are i) engineering functions; including identification of inspection and maintenance requirements, outage planning and scope definition plus engineering assessment, design and analysis as necessary to support equipment operation, ii) fitness of service work; including the expert evaluation of degradation mechanisms, disposition of defects for return to service or not, and the fitness for service analysis as required to justify ongoing operation with acceptable defects, iii) inspection work; including large scale eddy current inspection of tubing, the definition of defect size and character, code inspections of pressure vessel integrity and visual inspections for integrity and iv) maintenance work; including repairs, retrofits, cleaning and modifications, all as necessary to implement the measures defined during activities i) through iii). The paper discusses the approach and execution of the program for the achievement of the above objectives and particularly of items i) and ii). (author)

  17. Association between obesity, quality of life, physical activity and health service utilization in primary care patients with osteoarthritis.

    NARCIS (Netherlands)

    Rosemann, T.J.; Grol, R.P.T.M.; Herman, K.; Wensing, M.J.P.; Szecsenyi, J.

    2008-01-01

    ABSTRACT: OBJECTIVE: To assess the association of obesity with quality of life, health service utilization and physical activity in a large sample of primary care patients with osteoarthritis (OA). METHODS: Data were retrieved from the PraxArt project, representing a cohort of 1021 primary care

  18. Mechanical property tests in hot gas environment for evaluation of life expectancy of aero-engine turbine blades and for assessment of procedures for prolonging service life. Mechanische Pruefung unter Heissgasatmosphaere zur Ermittlung der Lebenserwartung von Fluggasturbinenschaufeln und zur Bewertung von Verfahren zur Lebensdauerverlaengerung

    Energy Technology Data Exchange (ETDEWEB)

    Peichl, L

    1984-01-01

    The aim of this programme was the determination and optimization of mechanical testing procedures in order to enable a service life prediction for turbine blades as well as to measure the life consumption of blades which have already been in service. Under these testing conditions procedures were to be investigated which lead to a prolongation of the service life of the blades. The results have shown that the rig test at constant values of load and temperature, which are typical for service conditions, is sufficient for the laboratory simulation. The life consumption of blades run in the engine can be determined by measuring the residual creep life in the rig test. Using the resulting data the life consumption of a particular blade run in the engine can be estimated by the non-destructive measurement of its elongation. The precision of residual life prediction is raised by respecting the master heat and porosity of the blades. From the investigation of high-temperature corrosion resistant coatings it follows that IN 100 can be protected against the attack of sea salt over its whole creep life by coating with a precious metal modified aluminide or by LPPS- or EB-PVD-MCrAlY-coatings. By aluminising, the cooling channels of turbine blades can be protected against oxidation over more than 700 h in the temperature/load cycling test. However, the coating technique used is only applicable under laboratory conditions. In contrary, internal coating by pulse aluminising, which is compatible to production conditions, showed less oxidation resistance.

  19. Factors influencing the end of the service life of protective gloves used in car repair shops: a preliminary report.

    Science.gov (United States)

    Emilia, Irzmańska; Agnieszka, Stefko; Katarzyna, Dyńska-Kukulska

    2015-01-01

    The paper presents the results of an end-of-service-life study on 2 kinds of protective gloves designed for workplaces in which workers are exposed to mineral oils and mechanical factors. The authors developed their own end-of-service-life study method that takes into account factors occurring during real-life use of protective gloves. The examined gloves were subjected to mechanical, chemical, and physical factors. The objective of the study was to compare the protective in new gloves subjected to a laboratory simulation test and in gloves used at workplaces in car repair shops. A further goal was to design a glove assessment procedure that would ensure comprehensive analysis of the actual level of performance provided by gloves exposed to selected chemical and mechanical factors as well as subjected to the influence of temperature and humidity, mechanical damage, and chemical degradation of material. The results lead to the conclusion that simultaneous exposure of protective gloves to mechanical, chemical, and physical factors significantly decreases their performance levels. Furthermore, similar performance levels were obtained for gloves subjected to laboratory simulation tests and for those used in the workplace.

  20. Ecosystem Services

    Science.gov (United States)

    Ecosystem goods and services are the many life-sustaining benefits we receive from nature and contribute to environmental and human health and well-being. Ecosystem-focused research will develop methods to measure ecosystem goods and services.

  1. Mathematical modeling of the heat transfer for determining the depth of thawing basin buildings with long service life

    Science.gov (United States)

    Sirditov, Ivan; Stepanov, Sergei

    2017-11-01

    In this paper, a numerical study of the problem of determining a thawing basin in the permafrost soil for buildings with a long service life is carried out using two methods, with the formulas of set of rules 25.13330.2012 "Soil bases and foundations on permafrost soils" and using a mathematical model.

  2. Advances in Modeling Concrete Service Life : Proceedings of 4th International RILEM PhD Workshop

    CERN Document Server

    Gulikers, Joost

    2012-01-01

    In this book, a critical analysis is made on service life models related to reinforcement corrosion. The contributors are on the frontier of knowledge in the field of durability of reinforced concrete. Topics covered in the book include: causes and mechanisms of deterioration, transport mechanisms in concrete, numerical modeling of concrete behavior, durability modeling and prediction, reliability approach to structural design for durability, structural behavior following degradation of concrete structures, deterioration and repair of concrete structures, and corrosion measurement techniques.

  3. Feasibility of a UK community-based, eTherapy mental health service in Greater Manchester: repeated-measures and between-groups study of 'Living Life to the Full Interactive', 'Sleepio' and 'Breaking Free Online' at 'Self Help Services'.

    Science.gov (United States)

    Elison, Sarah; Ward, Jonathan; Williams, Chris; Espie, Colin; Davies, Glyn; Dugdale, Stephanie; Ragan, Kathryn; Chisnall, Leanne; Lidbetter, Nicky; Smith, Keith

    2017-07-20

    There is increasing evidence to support the effectiveness of eTherapies for mental health, although limited data have been reported from community-based services. Therefore, this service evaluation reports on feasibility and outcomes from an eTherapy mental health service. 'Self Help Services', an Increasing Access to Psychological Therapies (IAPT) eTherapy service in Greater Manchester. 1068 service users referred to the service for secondary care for their mental health difficulties. Participants were triaged into one of three eTherapy programmes: 'Living Life to the Full Interactive' for low mood, stress and anxiety; 'Sleepio' for insomnia; and 'Breaking Free Online' for substance misuse, depending on clinical need. Standardised psychometric assessments of depression, anxiety and social functioning, collected as part of the IAPT Minimum Data Set, were conducted at baseline and post-treatment. Data indicated baseline differences, with the Breaking Free Online group having higher scores for depression and anxiety than the Living Life to the Full Interactive (depression CI 1.27 to 3.21, pmental health scores were found within all three groups (all pmental health difficulties (pmental health difficulties and suggest that eTherapies may be a useful addition to treatment offering in community-based services. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  4. Service Modeling for Service Engineering

    Science.gov (United States)

    Shimomura, Yoshiki; Tomiyama, Tetsuo

    Intensification of service and knowledge contents within product life cycles is considered crucial for dematerialization, in particular, to design optimal product-service systems from the viewpoint of environmentally conscious design and manufacturing in advanced post industrial societies. In addition to the environmental limitations, we are facing social limitations which include limitations of markets to accept increasing numbers of mass-produced artifacts and such environmental and social limitations are restraining economic growth. To attack and remove these problems, we need to reconsider the current mass production paradigm and to make products have more added values largely from knowledge and service contents to compensate volume reduction under the concept of dematerialization. Namely, dematerialization of products needs to enrich service contents. However, service was mainly discussed within marketing and has been mostly neglected within traditional engineering. Therefore, we need new engineering methods to look at services, rather than just functions, called "Service Engineering." To establish service engineering, this paper proposes a modeling technique of service.

  5. Service life prediction. Development of models for predicting the service life of power plant components subject to thermomechanical creep fatigue; Lebensdauervorhersage. Entwicklung von Modellen zur Lebensdauervorhersage von Kraftwerksbauteilen unter thermisch-mechanischer Kriechermuedungsbeanspruchung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Cui, L.; Scholz, A. [Technische Univ. Darmstadt (Germany). Institut fuer Werkstoffkunde; Hartrott, P. von; Schlesinger, M. [Fraunhofer-Institut fuer Werkstoffmechanik (IWM), Freiburg im Breisgau (Germany)

    2009-07-01

    Extensive use is made of massive components of heat resistant and highly heat resistant materials in installations of the power and heating industry. These components are exposed to varying thermomechanical stress as a result of ramping-up and down processes. In this research project two computer-assisted methods of predicting service life until crack initiation were extended to include cases of thermomechanical multi-axis stress conducive to creep fatigue and of superposition of high-cycle stress on power plant components. Investigations were limited to rotor steel of type X12CrMoWVNbN10-1-1. Complex thermomechanical multi-axis experiments were performed on round, notched and cruciform test specimens of close-to-life dimensions in order to demonstrate by experiment the validity of these models. The results of these calculations showed an acceptable degree of agreement between experiment and simulation for both models. Calculations on earlier TMF experiments performed at IfW on hollow specimens of 1%CrMoNiV showed good predictability for both the SARA and the ThoMat programme. Calculations on experiments performed at MPA Stuttgart on model bodies consisting of the same 1%CrMoNiV showed a predictability of acceptable variability considering the complexity of the stresses involved. A further outcome of this project is that the use of SARA appears universally suitable for the construction of new plants and in the service area, while the use of ThoMat appears suited for detail optimisation in the development process.

  6. LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, K. [Savannah River National Laboratory; Bellamy, S. [Savannah River National Laboratory; Daugherty, W. [Savannah River National Laboratory; Sindelar, R. [Savannah River National Laboratory; Skidmore, E. [Savannah River National Laboratory

    2013-08-18

    Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

  7. Evaluating weather factors and material response during outdoor exposure to determine accelerated test protocols for predicting service life

    Science.gov (United States)

    R. Sam Williams; Steven Lacher; Corey Halpin; Christopher White

    2005-01-01

    To develop service life prediction methods for the study of sealants, a fully instrumented weather station was installed at an outdoor test site near Madison, WI. Temperature, relative humidiy, rainfall, ultraviolet (UV) radiation at 18 wavelengths, and wind speed and direction are being continuously measured and stored. The weather data can be integrated over time to...

  8. Effectiveness of various public private partnership pavement rehabilitation treatments: A big data informatics survival analysis of pavement service life : final report.

    Science.gov (United States)

    2017-09-29

    Past research efforts have used a wide variety of methodological approaches to analyze pavement performance indicators, pavement rehabilitation treatments, and pavement service life. Using big data informatics methods, the intent of this study is to ...

  9. FAMILY-WORK CONFLICT AND LIFE SATISFACTION AMONG WORKERS OF ANKARA YOUTH SERVICES AND PROVINCIAL DIRECTORATE OF SPORTS ACCORDING TO DIFFERENT VARIABLES

    OpenAIRE

    Mustafa Önder; Burhan; Emrah

    2016-01-01

    In this study Work-Family Conflict, Family-Work Conflict and Life Satisfaction were carried out to indicate 329 staff’s relationship between each other, who work in Ankara Youth Services and Sports Province Management, by determining whether work-family conflict, family-work conflict and life satisfaction differientiate or not according to socio-demographic variables. According to obtained results, it was concluded that gender, age, having management position, number of children and duration ...

  10. The EMBRACE web service collection

    DEFF Research Database (Denmark)

    Pettifer, S.; Ison, J.; Kalas, M.

    2010-01-01

    The EMBRACE (European Model for Bioinformatics Research and Community Education) web service collection is the culmination of a 5-year project that set out to investigate issues involved in developing and deploying web services for use in the life sciences. The project concluded that in order...... for web services to achieve widespread adoption, standards must be defined for the choice of web service technology, for semantically annotating both service function and the data exchanged, and a mechanism for discovering services must be provided. Building on this, the project developed: EDAM......, an ontology for describing life science web services; BioXSD, a schema for exchanging data between services; and a centralized registry (http://www.embraceregistry.net) that collects together around 1000 services developed by the consortium partners. This article presents the current status of the collection...

  11. Health Care Service Needs and Correlates of Quality of Life: A Case Study of Elderly Chinese Immigrants in Canada

    Science.gov (United States)

    Chow, Henry P. H.

    2012-01-01

    This study explored the health care service needs and the major correlates of quality of life among 127 community-dwelling elderly Chinese immigrants in a western Canadian city. Participants were interviewed in their homes by trained, bilingual interviewers employing a structured questionnaire that covered a wide range of topics including health…

  12. Service quality and clinical outcomes: an example from mental health rehabilitation services in England.

    Science.gov (United States)

    Killaspy, Helen; Marston, Louise; Omar, Rumana Z; Green, Nicholas; Harrison, Isobel; Lean, Melanie; Holloway, Frank; Craig, Tom; Leavey, Gerard; King, Michael

    2013-01-01

    Current health policy assumes better quality services lead to better outcomes. To investigate the relationship between quality of mental health rehabilitation services in England, local deprivation, service user characteristics and clinical outcomes. Standardised tools were used to assess the quality of mental health rehabilitation units and service users' autonomy, quality of life, experiences of care and ratings of the therapeutic milieu. Multiple level modelling investigated relationships between service quality, service user characteristics and outcomes. A total of 52/60 (87%) National Health Service trusts participated, comprising 133 units and 739 service users. All aspects of service quality were positively associated with service users' autonomy, experiences of care and therapeutic milieu, but there was no association with quality of life. Quality of care is linked to better clinical outcomes in people with complex and longer-term mental health problems. Thus, investing in quality is likely to show real clinical gains.

  13. What works in 'real life' to facilitate home deaths and fewer hospital admissions for those at end of life?: results from a realist evaluation of new palliative care services in two English counties.

    Science.gov (United States)

    Wye, Lesley; Lasseter, Gemma; Percival, John; Duncan, Lorna; Simmonds, Bethany; Purdy, Sarah

    2014-01-01

    WE EVALUATED END OF LIFE CARE SERVICES IN TWO ENGLISH COUNTIES INCLUDING: coordination centres, telephone advice line, 'Discharge in Reach' nurses, a specialist community personal care team and community nurse educators. Elsewhere, we published findings detailing high family carer satisfaction and fewer hospital admissions, Accident and Emergency attendances and hospital deaths for service users compared to controls. The aim of this paper is to discuss what contributed to those outcomes. Using realist evaluation, data collection included documentation (e.g. referral databases), 15 observations of services and interviews with 43 family carers and 105 professionals. Data were analysed using framework analysis, applying realist evaluation concepts. Findings were discussed at successive team meetings and further data was collected until team consensus was reached. Services 'worked' primarily for those with cancer with 'fast track' funding who were close to death. Factors contributing to success included services staffed with experienced palliative care professionals with dedicated (and sufficient) time for difficult conversations with family carers, patients and/or clinical colleagues about death and the practicalities of caring for the dying. Using their formal and informal knowledge of the local healthcare system, they accessed community resources to support homecare and delivered excellent services. This engendered confidence and reassurance for staff, family carers and patients, possibly contributing to less hospital admissions and A&E attendances and more home deaths. With demand for 24-hour end of life care growing and care provision fragmented across health and social care boundaries, services like these that cut across organisational sectors may become more important. They offer an overview to help navigate those desiring a home death through the system.

  14. Life management of SG for WWER plants

    International Nuclear Information System (INIS)

    Trunov, N. B.; Dragunov, Yu. G.; Banyuk, G. F.

    2004-01-01

    Nowadays, 252 steam generators (SG) of horizontal type are in operation at WWER plants constructed by the Russian designs. In connection with end of the specified service life of the reactor plant equal to 30 years the activities are performed on service life extension of the main equipment including the SG. At some Units, throughout the design service life of SG there were problems resulting in necessity of SG replacement. At the same time the SGs at some Units are in successful operation above the design service life. This report deals with the peculiarities of operation of the horizontal SGs and the problems to be highlighted as the most important for service life extension. The main component to determine possibility for SG service life extension is the SG tubing. As the operating experience shows it is water chemistry of the secondary circuit that is the main factor influencing operability of the SG tubing. Therefore, differences in water chemistry organization leads to significant differences in operability of the SG tubing at various Units and in some cases within one Unit. Owing to the fact that the cases of water chemistry disturbance and the process of tubes fouling with the corrosion products of the main condensate system are not excluded, the damages continue to occur. Tube integrity shall be inspected by eddy current method using the various instrument complexes. This method has certain disadvantages but allows to estimate the degree and direction of degradation processes. The results of eddy current test (ECT) can be used to determine the plugging criterion for defective tubes. The significant number of defective tubes at some Units makes a choice of the plugging criterion to be an important problem, on which solution the SG safety, reliability and service life depends. The report deals with directions of activities in service life management for the SG at WWER plants. Main activities are improvement of water chemistry and non-destructive tests.(author)

  15. A Numerical Model for Estimation of Service Life of Tribological Systems of the Piston Engine

    Directory of Open Access Journals (Sweden)

    K. Gavrilov

    2017-09-01

    Full Text Available This article describes, develops and applies approach of the interaction of rough surfaces for one of the tasks of simulation of tribological systems of the piston engine. In this paper we described the general approach to building a model of interaction between rough surfaces, leading to the analysis of the Markov process. Given the initial data and the method of calculating the trajectory of movable elements on the lubricating layer, we determined the tribological parameters defining the service life of tribological systems of the piston engine on the example of crankshaft bearings.

  16. Life estimation I and C cable insulation materials based on accelerated life testing accelerated life testing

    International Nuclear Information System (INIS)

    Santhosh, T.V.; Ramteke, P.K.; Shrestha, N.B.; Ahirwar, A.K.; Gopika, V.

    2016-01-01

    Accelerated Iife tests are becoming increasingly popular in today's industry due to the need for obtaining life data quickly and reliably. Life testing of products under higher stress levels without introducing additional failure modes can provide significant savings of both time and money. Correct analysis of data gathered via such accelerated life testing will yield parameters and other information for the product's life under use stress conditions. To be of practical use in assessing the operational behaviour of cables in NPPs, laboratory ageing aims to mimic the type of degradation observed under operational conditions. Conditions of testing therefore need to be carefully chosen to ensure that the degradation mechanism occurring in the accelerated tests are similar to those which occur in service. This paper presents the results of an investigation in which the elongation-at-break (EAB) measurements were carried on a typical control cable to predict the mean life at service conditions. A low voltage polyvinyl chloride (PVC) insulated and PVC sheathed control cable, used in NPP instrumentation and control (I and C) applications, was subjected thermal ageing at three elevated temperatures

  17. On the application of thermodynamics of corrosion for service life design of concrete structures

    DEFF Research Database (Denmark)

    Küter, Andre; Geiker, Mette Rica; Møller, Per

    2010-01-01

    There are unexploited possibilities in the application of thermodynamics of corrosion for service life design (SLD) of concrete structures. Thermodynamics provides means for insightful descriptions of corrosion mechanisms and of corrosion protection mechanisms. Strategies for corrosion protection...... of the application of thermodynamics for SLD and gives examples of two applications: description of corrosion processes and design of countermeasures. Emphasis is set on chloride induced corrosion....... can be based on thermodynamically consistent corrosion mechanisms and evaluation of existing and design of new countermeasures can be performed using thermodynamics. Similarly, materials concepts for embedded electrodes can be designed using thermodynamics. The present paper provides a brief outline...

  18. Service Life Prediction of Wood Claddings by in-situ Measurement of Wood Moisture Content

    DEFF Research Database (Denmark)

    Engelund, Emil Tang; Lindegaard, Berit; Morsing, Niels

    2009-01-01

    of wood moisture are done by in-situ resistance moisture meters (Lindegaard and Morsing 2006). The aim is that the test should form the basis of evaluation of the maintenance requirements and the prediction of service life of the surface treatment and the wood/construction. At the moment 60 test racks...... are exposed. This study examines the data from the first five years of outdoor exposure using data from a test rack with a water-borne acrylic coating and a test rack with ICP coating for case studies. The moisture content data was converted into weekly average and weekly variation values which gave a deeper...

  19. Organizational performance focused on users' quality of life: The role of service climate and "contribution-to-others" wellbeing beliefs.

    Science.gov (United States)

    Pătraș, Luminița; Martínez-Tur, Vicente; Estreder, Yolanda; Gracia, Esther; Moliner, Carolina; Peiró, José María

    2018-06-01

    The investigation of organizational factors as precursors of the quality of life (QoL) of service users in organizations for individuals with intellectual disability has been relatively neglected.With this in mind, this study tests the mediation of service climate between employee's "contribution-to-others" wellbeing beliefs (COWBs) and organizational performance focused on the QoL of individuals with intellectual disability. A total of 104 organizations participated in the study. Data were collected from 885 employees and 809 family members of individuals with intellectual disability. The results of the multilevel mediation model supported the hypotheses. When employees believe that their own wellbeing depends on helping others (COWBs) service climate reported by employees is stimulated. Service climate in turn was associated with organizational performance focused on QoL of people with intellectual disability, assessed by family members. The manuscript concludes with theoretical and practical implications of the study. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Control of the Onboard Microgravity Environment and Extension of the Service Life of the Long-Term Space Station

    Science.gov (United States)

    Titov, V. A.

    2018-03-01

    The problem of control of the on-board microgravity environment in order to extend the service life of the long-term space station has been discussed. Software developed for the ISS and the results of identifying dynamic models and external impacts based on telemetry data have been presented. Proposals for controlling the onboard microgravity environment for future long-term space stations have been formulated.

  1. Athletes Off the Field: A Model for Team Building and Leadership Development through Service Learning. Linking Learning with Life.

    Science.gov (United States)

    Haughey, Laurie

    This booklet provides step-by-step guidelines for developing a leadership-through-service-learning component for a school athletic team. It is based on a program called LIFE LINE (Leaders in Football and Education) founded in 1996 as a peer leadership group that would increase team unity and success both on and off the field. The guide summarizes…

  2. Semiempirical Methodology for Estimating the Service Life of Concrete Deck Panels Strengthened with Fiber-Reinforced Polymer

    Directory of Open Access Journals (Sweden)

    Eon-Kyoung Kim

    2014-01-01

    Full Text Available Deterioration of concrete bridge decks affects their durability, safety, and function. It is therefore necessary to conduct structural rehabilitation of damaged concrete decks by strengthening them with fiber-reinforced polymer. Of the recent studies on the strengthened structures, most have focused on static behavior; only a few studies have investigated fatigue behavior. Accurate analysis of fatigue in concrete deck performance requires a more realistic simulated moving load. This study developed a theoretical live-load model to reflect the effect of moving vehicle loads, based on a statistical approach to the measurement of real traffic loads over various time periods in Korea. It assessed the fatigue life and strengthening effect of bridge decks strengthened with either carbon fiber sheets or grid carbon fiber polymer plastic using probabilistic and reliability analyses. It used extrapolations and simulations to derive maximum load effects for time periods ranging from 1 day to 75 years. Limited fatigue tests were conducted and probabilistic and reliability analyses were carried out on the strengthened concrete bridge deck specimens to predict the extended fatigue life. Analysis results indicated that strengthened concrete decks provide sufficient resistance against increasing truck loads during the service life of a bridge.

  3. Collaborative Business Services Provision

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Maciaszek, L.A.; Cordeiro, J.; Dietz, J.L.G.

    2013-01-01

    The association of services to manufactured products, leading to service-enhanced products, is an important mechanism for value creation and differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Suitable servicing in this context typically

  4. Service-life prediction of reinforced concrete structures in subsurface environment

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Ki Jung; Jung, Hae Ryong; Park, Joo Wan [Korea Radioactive Waste Agency, Daejeon (Korea, Republic of)

    2016-03-15

    This paper focuses on the estimation of durability and service-life of reinforced concrete structures in Wolsong Low- and intermediate-level wastes Disposal Center (WLDC) in Korea. There are six disposal silos located in the saturated environment. The silo concrete is degraded due to reactions with groundwater and chemical attacks, and finally it will lose its properties as a transport barrier. The infiltration of sulfate and magnesium, leaching of potassium hydroxide, and chlorine induced corrosion are the most significant factors for degradation of reinforced concrete structure in underground environment. From the result of evaluation of the degradation time for each factor, the degradation rate of the reinforced concrete due to sulfate and magnesium is 1.308×10{sup -3} cm/yr, and it is estimated to take 48,000 years for full degradation while potassium hydroxide is leached in depth of less than 1.5 cm at 1,000 years after the initiation of degradation. In case of chlorine induced corrosion, it takes 1,648 years to initiate corrosion in the main reinforced bar and 2,288 years to reach the lifetime limit of the structural integrity, and thus it is evaluated as the most significant factor.

  5. The Relationship of Perceptions of Service and Support Adequacy to Family Quality of Life for Families of Children with Deafblindness

    Science.gov (United States)

    Kyzar, Kathleen

    2010-01-01

    This study investigated the relationship between families' perceptions of supports and services and family quality of life (FQOL) for families of children with deafblindness, and the potential of satisfaction with family-professional partnerships and child age as moderators of this relationship. The study was guided by the Unified Theory of Family…

  6. Life cycle management of service water systems

    International Nuclear Information System (INIS)

    Egan, Geoffrey R.; Besuner, Philip M.; Mahajan, Sat P.

    2004-01-01

    As nuclear plants age, more attention must focus on age and time dependent degradation mechanisms such as corrosion, erosion, fatigue, etc. These degradation mechanisms can best be managed by developing a life cycle management plan which integrates past historical data, current conditions and future performance needs. In this paper we present two examples of life cycle management. In the first example, the 20-year maintenance history of a sea water cooling system (cement-lined, cast iron) is reviewed to develop attributes like maintenance cost, spare part inventory, corrosion, and repair data. Based on this information, the future expected damage rate was forecast. The cost of managing the future damage was compared with the cost to replace (in kind and with upgraded materials. A decision optimization scheme was developed to choose the least cost option from: a) Run as-is and repair; b) replace in kind; or c) replace with upgraded material and better design. In the second example, life cycle management techniques were developed for a ceilcote lined steel pipe cooling water system. Screens (fixed and traveling), filters, pumps, motors, valves, and piping were evaluated. (author)

  7. The Association Between Home Palliative Care Services and Quality of End-of-Life Care Indicators in the Province of Québec.

    Science.gov (United States)

    Gagnon, Bruno; Nadeau, Lyne; Scott, Susan; Dumont, Serge; MacDonald, Neil; Aubin, Michèle; Mayo, Nancy

    2015-07-01

    In Canada, governments have increased spending on home care to promote better end-of-life care. In the province of Québec, Canada, home palliative care (PC) services (HPCS) are provided by Public Local Community-Based Health Care Service providers (Centres Locaux de Services Communautaires [CLSC]) with universal coverage. Accordingly, there should be no regional variations of these services and their effect on quality of end-of-life PC (QEoLPC) indicators. To test if all the CLSCs provided the same level of HPCS to cancer patients in the province of Québec, Canada, and the association between level of HPCS and QEoLPC indicators. Characteristics of 52,316 decedents with cancer were extracted from administrative databases between 2003 and 2006. Two gender-specific "adjusted performance of CLSCs in delivering HPCS" models were created using gender-specific hierarchical regression adjusted for patient and CLSC neighborhood characteristics. Using the same approach, the strength of the association between the adjusted performance of CLSCs in delivering HPCS and the QEoLPC indicators was estimated. Overall, 27,255 (52.1%) decedents had at least one HPCS. Significant variations in the adjusted performance of CLSC in delivering HPCS were found. Higher performance led to a lower proportion of men having more than one emergency room visit during the last month of life (risk ratio [RR] 0.924; 95% CI 0.867-0.985), and for women, a higher proportion dying at home (RR 2.255; 95% CI 1.703-2.984) and spending less time in hospital (RR 0.765; 95% CI 0.692-0.845). Provision of HPCS remained limited in Québec, but when present, they were associated with improved QEoLPC indicators. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  8. On the value of SHM in the context of service life integrity management

    DEFF Research Database (Denmark)

    Qin, Jianjun; Thöns, Sebastian; Faber, Michael Havbro

    2015-01-01

    This paper addresses the optimization of structural health monitoring(SHM) before its implementation on the basis of its Value of Information (VoI). The approach for the quantification of the value of SHM builds upon a service life cost assessment and generic structural performance model...... in conjunction with the observation, i.e. monitoring, of deterioration increments. The structural performance is described with a generic deterioration model to be calibrated to the relevant structural deterioration mechanism, such as e.g. fatigue and corrosion. The generic deterioration model allows...... for the incorporation of monitored damage increments and accounts for the precision of the data by considering the statistical uncertainties, i.e. the amount of monitoring data due to the monitoring period, and by considering the measurement uncertainty. The value of structural health monitoring is then quantified...

  9. Are satisfaction with and self-management of personal assistance services associated with the life satisfaction of persons with physical disabilities?

    Science.gov (United States)

    Fleming-Castaldy, Rita P

    2011-01-01

    To examine the relationships between satisfaction with and self-management of personal assistance services (PAS) and the quality of life (QoL) of persons with disabilities. To test the postulate that consumer-directed PAS can fulfil the human need for control and contribute to a satisfactory life. A survey compared the perspectives of persons using consumer-directed PAS versus those using agency-directed. A Personal Data Form obtained demographics and PAS characteristics. The Quality of Life Inventory measured life satisfaction. A PAS questionnaire measured perceptions about the management of, desire for control of, and satisfaction with PAS. Data were analysed using SPSS®- 14. Significant relationships were found between QoL and satisfaction with PAS (p perceived control of PAS and satisfaction with PAS (p satisfaction with their PAS (p satisfaction, and QoL support the value of consumer-directed programmes. Rehabilitation professionals can use this knowledge to develop, implement and research practises that enable self-management.

  10. 42 CFR 410.40 - Coverage of ambulance services.

    Science.gov (United States)

    2010-10-01

    ..., which are defined in § 414.605 of this chapter: (1) Basic life support (BLS) (emergency and nonemergency). (2) Advanced life support, level 1 (ALS1) (emergency and nonemergency). (3) Advanced life support... Coverage of ambulance services. (a). Basic rules. Medicare Part B covers ambulance services if the...

  11. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

  12. Effect of a home-based end-of-life nursing service on hospital use at the end of life and place of death: a study using administrative data and matched controls.

    Science.gov (United States)

    Chitnis, X A; Georghiou, T; Steventon, A; Bardsley, M J

    2013-12-01

    To assess the effect of routinely delivered home-based end-of-life care on hospital use at the end of life and place of death. Retrospective analysis using matched controls and administrative data. Community-based care in England. 29,538 people aged over 18 who received Marie Curie nursing support compared with 29,538 controls individually matched on variables including: age, socioeconomic deprivation, prior hospital use, number of chronic conditions and prior diagnostic history. Home-based end-of-life nursing care delivered by the Marie Curie Nursing Service (MCNS), compared with end-of-life care available to those who did not receive MCNS care. Proportion of people who died at home; numbers of emergency and elective inpatient admissions, outpatient attendances and attendances at emergency departments in the period until death; and notional costs of hospital care. Intervention patients were significantly more likely to die at home and less likely to die in hospital than matched controls (unadjusted OR 6.16, 95% CI 5.94 to 6.38, pnursing for longer. Home-based end-of-life care offers the potential to reduce demand for acute hospital care and increase the number of people able to die at home.

  13. A study comparing changes in loading conditions of an extended service life system using aluminum 2024-T351

    Science.gov (United States)

    Beal, Roger Zack

    The current fiscally austere environment prevalent in the military and industry is driving extreme measures to save money. In the United States Air Force, this has driven enormous efforts to trim sustainment spending on extended life aircraft. The challenge to the aerospace engineer is to ensure flight safety in the midst of this economic pressure. One method of cutting costs is to increase the time an aircraft is in service by delaying the point when the aircraft is taken out of service for depot maintenance. To ensure flight safety, in depth fatigue and fracture analysis needs to be accomplished to assess increasing the inspection interval. The purpose of this study was to determine the sensitivity of Aluminum 2024-T351 alloy, a common material used in tension dominated aerospace applications, to two different loading spectra---one that is aggressive and the other that is benign. This was accomplished by conducting five different combinations of the two spectra, developing computer simulations using the AFGROW software and comparing with the measured data. The results showed that the material demonstrated significantly different behavior between the two spectra. These results provide a valuable tool for the aerospace engineer for fatigue life prediction and inspection interval evaluation.

  14. On using continuoas Markov processes for unit service life evaluation taking as an example the RBMK-1000 gate-regulating valve

    International Nuclear Information System (INIS)

    Klemin, A.I.; Emel'yanov, V.S.; Rabchun, A.V.

    1984-01-01

    A technique is sugfested for estimating service life indices of equipment based on describing the process of the equipment ageing by continuous Markov diffusion process. It is noted that a number of problems on estimating durability indices of products is reduced to problems of estimating characteristics of the time of the first attainment of the preset boundary (boundaries) by a random process describing the ageing of a product. The methods of statistic estimation of the drift and diffusion coefficient in the continuous Markov diffusion process are considered formulae for their point and interval estimates are presented. A special description is given for a case of a stationary process and determining in this case mathematical expectation and dispersion of the time of the first attainment of a boundary (boundaries). The method of numerical simulation of the diffusion process with constant drift and diffusion coefficients is also described; results obtained on the basis of such a simulation are discussed. An example of using the suggested technique for quantitative estimate of the service life for the RBMK-1000 gate-regulating value is given

  15. Mass Customization Services

    DEFF Research Database (Denmark)

    Friedrich, Gerhard

    Topics of the IMCM’08 & PETO’08 and this book are: Mass customization in service, mass customizing financial services, mass customization in supply networks, implementation issues in logistics, product life cycle and mass customization. The research field of mass customization is more than 15 years...

  16. Computer Aided Product Service Systems Design : Service CAD and Its integration with Life Cycle Simulation

    NARCIS (Netherlands)

    Komoto, H.

    2009-01-01

    Integration of product design into service design, or vice versa, is considered to bring more efficient and effective value addition. Besides EcoDesign tools and methods, a methodology to design such an integration of products and services from a systemic perspective, or product-service systems

  17. Influence of accessibility of services on Quality of Life of school children with Cerebral Palsy in Latvia

    Directory of Open Access Journals (Sweden)

    Cibule L.

    2012-10-01

    Full Text Available The aim of the study was to investigate the influence of accessibility of services and health related factors on Quality of Life (QoL of school children with Cerebral Palsy (CP in Latvia. 80 children 47 boys and 33 girls with CP and their parents from all regions of Latvia took part in the study. Mean age of participants was 11,7 (SD± 3,5 years. 50 children without diagnosed chronic diseases formed the control group. Validated evaluation tools were used in the study (KIDSCREEN-52, GMFCS- E&R. The results show lower QoL in children with CP in comparison with their healthy peers and European children. QoL is influenced by the level of gross motor functions, lack of coordination of services, lack of rehabilitation infrastructure and presence of environmental barriers in Latvia.

  18. Extending service life of steam generators by sleeving tubes

    International Nuclear Information System (INIS)

    Gutzwiller, J.E.

    1982-01-01

    Steam generator tubes that are failing due to IGA in the tubesheet crevice can be kept in service by using the basic sealable sleeve design developed by BandW. Variations of the present sleeve design could significantly reduce the number of tubes that must be plugged each year. Sleeving had the potential of keeping 28 percent more tubes in service during 1979. Lowering the overall rate at which tubes are removed from service by plugging will reduce the probability of having to derate the plant or replace the steam generator. Considering tomorrow's replacement power costs, sleeving to keep tubes in service is a practical and sound investment

  19. The importance of content and face validity in instrument development: lessons learnt from service users when developing the Recovering Quality of Life measure (ReQoL).

    Science.gov (United States)

    Connell, Janice; Carlton, Jill; Grundy, Andrew; Taylor Buck, Elizabeth; Keetharuth, Anju Devianee; Ricketts, Thomas; Barkham, Michael; Robotham, Dan; Rose, Diana; Brazier, John

    2018-07-01

    Service user involvement in instrument development is increasingly recognised as important, but is often not done and seldom reported. This has adverse implications for the content validity of a measure. The aim of this paper is to identify the types of items that service users felt were important to be included or excluded from a new Recovering Quality of Life measure for people with mental health difficulties. Potential items were presented to service users in face-to-face structured individual interviews and focus groups. The items were primarily taken or adapted from current measures and covered themes identified from earlier qualitative work as being important to quality of life. Content and thematic analysis was undertaken to identify the types of items which were either important or unacceptable to service users. We identified five key themes of the types of items that service users found acceptable or unacceptable; the items should be relevant and meaningful, unambiguous, easy to answer particularly when distressed, do not cause further upset, and be non-judgemental. Importantly, this was from the perspective of the service user. This research has underlined the importance of service users' views on the acceptability and validity of items for use in developing a new measure. Whether or not service users favoured an item was associated with their ability or intention to respond accurately and honestly to the item which will impact on the validity and sensitivity of the measure.

  20. Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services

    Science.gov (United States)

    Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

    2017-01-01

    International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions. PMID:28429710

  1. Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services

    Science.gov (United States)

    Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

    2017-04-01

    International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.

  2. Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services.

    Science.gov (United States)

    Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen

    2017-04-21

    International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.

  3. Quality of Life in Europe

    Directory of Open Access Journals (Sweden)

    Norina Popovici

    2016-01-01

    Many times we wondered why people want a certain comfort in exchange for sacrifices on longterm: we want houses, cars, holidays, quality services. All our life we work and give up many tothings (maybe more important than achieving material benefits. It's about quality of life. In thispaper we analyzed the quality of life in Europe addressing several factors, such as subjective wellbeing,living standards and material constraints, work-life balance, family life and social life,health and education.

  4. Value Retention, Service Life, Use Intensity and Long-Term Productivity of Wood Chippers as Obtained from Contractor Records

    Directory of Open Access Journals (Sweden)

    Raffaele Spinelli

    2017-12-01

    Full Text Available Acknowledging the absence of up-to-date empirical data on the value retention, service life and annual use of chipping machinery, in 2017 the authors surveyed the records kept by 50 contractors offering biomass chipping services. The machine fleet and operations in this survey could be taken as representative for most of Europe, where the biomass sector is well established and is facing further expansion. Data collection included the whole chipping unit, comprised of chipper, carrier and loader. Manually-fed units were excluded from the survey. The data pointed at a service life up to and exceeding 10,000 h and 10 years, which relieved any concerns about poor durability. Value retention was good, and may exceed that of other mainstream forestry equipment. Engine power was the main explanatory variable in any models to predict purchase price and productivity. The effect of this variable could explain most of the variability (>80% in the purchase price and productivity data. Results also pointed at the essential equivalence in price and productivity between PTO-driven (i.e., tractor powered and independent-engine chippers, once differences in engine power are accounted for. However, the distribution of purchase price between different components of the chipping unit was different between the two unit types, with the chipper accounting for a larger proportion of the total investment in independent-engine units. Machine power was also different, with most PTO-driven units being significantly smaller than independent-engine units, due to the limitations of existing tractors. Furthermore, half of the carriers assigned to a PTO-driven unit were subject to flexible use, i.e., they were not solely used for chipping work.

  5. LifeSteps: An Evidence-based Health Promotion Program for Underserved Populations – A Community Service Learning Approach

    Directory of Open Access Journals (Sweden)

    Melanie Austin-McCain

    2015-04-01

    Full Text Available Chronic diseases are the most common, costly, and preventable of all health problems in the United States. Chronic diseases represent the leading causes of death and are experienced at higher rates by minority populations (CDC, 2012. Innovative community-based health promotion programs are recommended that meet the diverse needs of underserved populations (Yeary, et al., 2011. LifeSteps is being developed as an evidence-based health promotion program focusing on health and wellness, a domain area defined within the Occupational Therapy Practice Framework (OTPF, 2008. LifeSteps will utilize a client-centered approach to coach individuals in making health behavior changes. Fieldwork and service-learning components are incorporated integrating clinical practice, academic study, and collaboration with community providers. Program evaluation measures based on the Transtheoretical Model (TTM have been identified to address all phases of program planning. The LifeSteps health promotion program aligns with local, national, and international objectives and addresses the need for programs that meet the diverse needs of underserved populations. Occupational therapists are in a unique position for implementing community-based interventions that promote health and contribute to a healthier society.

  6. The soil life cycle

    NARCIS (Netherlands)

    Leeuwen, van J.P.

    2016-01-01

    Soil is one of the most important natural resource for life on Earth and provides important ecosystem services, such as food production, carbon sequestration, water regulation and contaminant attenuation. Soil quality, defined as the soil’s ability to provide these services, is drastically

  7. The effectiveness of communication-skills training interventions in end-of-life noncancer care in acute hospital-based services: A systematic review.

    Science.gov (United States)

    Lord, Laura; Clark-Carter, David; Grove, Amy

    2016-08-01

    A systematic review was conducted in order to explore the effectiveness of communication-skills training interventions in end-of-life care with noncancer acute-based healthcare staff. Articles were included if they (1) focused on communication-skills training in end-of-life/palliative care for noncancer acute-based staff and (2) reported an outcome related to behavior change with regard to communication. Sixteen online databases were searched, which resulted in 4,038 potential articles. Screening of titles left 393 articles that met the inclusion criteria. Abstracts (n = 346) and full-text articles (n = 47) were reviewed, leaving 10 papers that met the criteria for our review. All articles explored the effect of communication-skills training on aspects of staff behavior; one study measured the effect on self-efficacy, another explored the impact on knowledge and competence, and another measured comfort levels in discussing the end of life with patients/families. Seven studies measured a number of outcomes, including confidence, attitude, preparedness, stress, and communication skills. Few studies have focused on end-of-life communication-skills training in noncancer acute-based services. Those that do have report positive effects on staff behavior with regard to communication about the end of life with patients and families. The studies varied in terms of the population studied and the health services involved, and they scored only moderately or weakly on quality. It is a challenge to draw a definite conclusion about the effectiveness of training interventions in end-of-life communication because of this. However, the findings from our review demonstrate the potential effectiveness of a range of training interventions with healthcare professionals on confidence, attitude, self-efficacy, and communication skills. Further research is needed to fully explore the effectiveness of existing training interventions in this population, and evidence using objective measures

  8. Multi-objective optimization of swash plate forging process parameters for the die wear/service life improvement

    Science.gov (United States)

    Hu, X. F.; Wang, L. G.; Wu, H.; Liu, S. S.

    2017-12-01

    For the forging process of the swash plate, the author designed a kind of multi-index orthogonal experiment. Based on the Archard wear model, the influences of billet temperature, die temperature, forming speed, top die hardness and friction coefficient on forming load and die wear were numerically simulated by DEFORM software. Through the analysis of experimental results, the best forging process parameters were optimized and determined, which could effectively reduce the die wear and prolong the die service life. It is significant to increase the practical production of enterprise, especially to reduce the production cost and to promote enterprise profit.

  9. Improving health related quality of life among rural hypertensive patients through the integrative strategy of health services delivery: a quasi-experimental trial from Chongqing, China.

    Science.gov (United States)

    Miao, Yudong; Zhang, Liang; Sparring, Vibeke; Sandeep, Sandeep; Tang, Wenxi; Sun, Xiaowei; Feng, Da; Ye, Ting

    2016-08-23

    Integrative strategy of health services delivery has been proven to be effective in economically developed countries, where the healthcare systems have enough qualified primary care providers. However rural China lacks such providers to act as gatekeeper, besides, Chinese rural hypertensive patients are usually of old age, more likely to be exposed to health risk factors and they experience a greater socio-economic burden. All these Chinese rural setting specific features make the effectiveness of integrative strategy of health services in improving health related quality of life among Chinese rural hypertensive patients uncertain. In order to assess the impact of integrative strategy of health services delivery on health related quality of life among Chinese rural hypertensive patients, a two-year quasi-experimental trial was conducted in Chongqing, China. At baseline the sample enrolled 1006 hypertensive patients into intervention group and 420 hypertensive patients into control group. Physicians from village clinics, town hospitals and county hospitals worked collaboratively to deliver multidisciplinary health services for the intervention group, while physicians in the control group provided services without cooperation. The quality of life was studied by SF-36 Scale. Blood pressures were reported by town hospitals. The Difference-in-Differences model was used to estimate the differences in SF-36 score and blood pressure of both groups to assess the impact. The study showed that at baseline there was no statistical difference in SF-36 scores between both groups. While at follow-up the intervention group scored higher in overall SF-36, Role Physical, Body Pain, Social Functioning and Role Emotional than the control group. The Difference-in-Differences result demonstrated that there were statistical differences in SF-36 total score (p = 0.011), Role Physical (p = 0.027), Social Functioning (p = 0.000), Role Emotional (p = 0.002) between both

  10. Development of augmented reality system for servicing electromechanical equipment

    Science.gov (United States)

    Zhukovskiy, Y.; Koteleva, N.

    2018-05-01

    Electromechanical equipment is widely used. It is used in industrial enterprises, in the spheres of public services, in everyday life, etc. Maintenance servicing of electromechanical equipment is an important part of its life cycle. High-quality and timely service can extend the life of the electromechanical equipment. The creation of special systems that simplify the process of servicing electromechanical equipment is an urgent task. Such systems can shorten the time for maintenance of electrical equipment, and, therefore, reduce the cost of maintenance in general. This article presents an analysis of information on the operation of service services for maintenance and repair of electromechanical equipment, identifies the list of services, and estimates the time required to perform basic service operations. The structure of the augmented reality system is presented, the ways of interaction of the augmented reality system with the automated control systems working at the enterprise are presented.

  11. Predicting the residual life of plant equipment - Why worry

    International Nuclear Information System (INIS)

    Jaske, C.E.

    1985-01-01

    Predicting the residual life of plant equipment that has been in service for 20 to 30 years or more is a major concern of many industries. This paper reviews the reasons for increased concern for residual-life assessment and the general procedures used in performing such assessments. Some examples and case histories illustrating procedures for assessing remaining service life are discussed. Areas where developments are needed to improve the technology for remaining-life estimation are pointed out. Then, some of the critical issues involved in residual-life assessment are identified. Finally, the future role of residual-life prediction is addressed

  12. Behavioral and quality-of-life outcomes in different service models for methadone maintenance treatment in Vietnam.

    Science.gov (United States)

    Tran, Bach Xuan; Nguyen, Long Hoang; Nong, Vuong Minh; Nguyen, Cuong Tat; Phan, Huong Thu Thi; Latkin, Carl A

    2016-02-02

    Integrating HIV/AIDS and methadone maintenance treatment (MMT) services with existing health care delivery system is critical in sustaining efforts to fight HIV/AIDS in large injection-driven epidemics. However, efficiency of different integrative service models is unknown. This study assessed behavioral and health-related quality-of-life (HRQOL) outcomes of MMT in four service delivery models and explored factors associated with these outcomes of interest. A cross-sectional survey was conducted in two HIV epicenters in Vietnam: Hanoi and Nam Dinh Province. All patients in five selected MMT clinics were invited to participate, and 1016 were interviewed (80-90% response rate). Respondents had a mean age of 35.8, taken MMT for average 16.5 months and 3.3% on MMT for 36-60 months. The MMT integrated with rural district health center (DHC) has the highest prevalence of concurrent drug use (11.3%). The percentage of condom use (last sexual intercourse) with primary and casual partners was lowest in the MMT at urban DHCs. Patients at the rural DHC reported very high proportions of pain/discomfort (37.8%), anxiety/depression (43.1%), and mobility (13.3%). In regression models, poorer HRQOL outcomes were found in MMT models in the rural areas or without general health care, and among those patients who were HIV positive, reported concurrent drug use, and had higher numbers of previous drug rehabilitation episodes. Mobility and anxiety/depression are factors that increased the likelihood of concurrent drug use among MMT patients. Outcomes of MMT were diverse across different integrative service models. Policies on rapid expansion of the MMT program in Vietnam should also emphasize on the integration with comprehensive health care services including psychological supports for patients.

  13. Energy use in repairs by cover concrete replacement or silane treatment for extending service life of chloride-exposed concrete structures

    Science.gov (United States)

    Petcherdchoo, A.

    2018-05-01

    In this study, the service life of repaired concrete structures under chloride environment is predicted. This prediction is performed by considering the mechanism of chloride ion diffusion using the partial differential equation (PDE) of the Fick’s second law. The one-dimensional PDE cannot simply be solved, when concrete structures are cyclically repaired with cover concrete replacement or silane treatment. The difficulty is encountered in solving position-dependent chloride profile and diffusion coefficient after repairs. In order to remedy the difficulty, the finite difference method is used. By virtue of numerical computation, the position-dependent chloride profile can be treated position by position. And, based on the Crank-Nicolson scheme, a proper formulation embedded with position-dependent diffusion coefficient can be derived. By using the aforementioned idea, position- and time-dependent chloride ion concentration profiles for concrete structures with repairs can be calculated and shown, and their service life can be predicted. Moreover, the use of energy in different repair actions is also considered for comparison. From the study, it is found that repairs can control rebar corrosion and/or concrete cracking depending on repair actions.

  14. 'Silent voices' in health services research: ethnicity and socioeconomic variation in participation in studies of quality of life in childhood visual disability.

    Science.gov (United States)

    Tadic, Valerie; Hamblion, Esther Louise; Keeley, Sarah; Cumberland, Phillippa; Lewando Hundt, Gillian; Rahi, Jugnoo Sangeeta

    2010-04-01

    Purpose. To investigate patterns of participation of visually impaired (VI) children and their families in health services research. Methods. The authors compared clinical and sociodemographic characteristics of children and their families who participated with those who did not participate in two studies of quality of life (QoL) of VI children. In Study 1, the authors interviewed VI children and adolescents, aged 10 to 15 years, about their vision-related quality of life (VRQoL) as the first phase of a program to develop a VRQoL instrument for this population. One hundred seven children with visual impairment (visual acuity in the better eye LogMar worse than 0.51) were invited to participate in the interviews. Study 2 investigated health-related quality of life (HRQoL) of VI children using an existing generic instrument, administered in a postal survey. 151 VI children and adolescents, aged 2 to 16 years, with hereditary retinal disorders were invited to participate in the survey. Results. The overall participation level was below 50%. In both studies, participants from white ethnic and more affluent socioeconomic backgrounds were overrepresented. Participation did not vary by age, sex, or clinical characteristics. Conclusions. The authors suggest that there are barriers to participation in child- and family-centered research on childhood visual disability for children from socioeconomically deprived or ethnic minority groups. They urge assessment and reporting of participation patterns in further health services research on childhood visual disability. Failure to recognize that there are "silent voices" is likely to have important implications for equitable and appropriate service planning and provision for VI children.

  15. Data as a service a framework for providing reusable enterprise data services

    CERN Document Server

    Sarkar, Pushpak

    2015-01-01

    Data as a Service shows how organizations can leverage "data as a service" by providing real-life case studies on the various and innovative architectures and related patterns. Comprehensive approach to introducing data as a service in any organization. A re-usable and flexible SOA based architecture framework. Roadmap to introduce 'big data as a service' for potential clients. Presents a thorough description of each component in the DaaS reference architecture so readers can implement solutions.

  16. The effect of quality circles on job satisfaction and quality of work-life of staff in emergency medical services.

    Science.gov (United States)

    Hosseinabadi, Reza; Karampourian, Arezou; Beiranvand, Shoorangiz; Pournia, Yadollah

    2013-10-01

    Quality circles, as a participatory management technique, offer one alternative for dealing with frustration and discontent of today's workers. This study was conducted to investigate the effect of implementation of quality circles on nurses' quality of work-life and job satisfaction. In this study, two emergency medical services (EMS) of Hamedan province were selected and randomly assigned as the experimental and control groups. After the experimental group was trained and quality circles were established in this group, the levels of quality of work-life and job satisfaction were measured in the two groups. Then, the statistical analyses were performed using t-test. After the intervention, the results showed significant differences between the scores of motivational factors (p=0.001), the total scores of job satisfaction (p=0.003), and the scores of some quality of work life (QWL) conceptual categories including the use and development of capacities (p=0.008), the total space of life (p=0.003), and the total scores of QWL (p=0.031) in the experimental group compared to those in the control group. This study confirms the effectiveness of quality circles in improving quality of work-life and job satisfaction of nurses working in EMS, and offers their application as a management method that can be used by EMS managers. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Status, remaining service-life and quality assurance of PP-materials in flue-gas applications; Status, kvarvarande livslaengd och kvalitetssaekring av PP-material i anlaeggningar foer rening och kondensering av roekgaser

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, Karin

    2011-10-15

    Background: The project is intended to provide a better understanding of how the service life of PP-materials is affected when used in flue-gas applications. It intends to form a basis for the development of relevant techniques and a methodology from which it is possible to give advice and guidance so that the quality of PP-materials can be ensured for a given desired service life. In addition it aims as being able to assess the status and remaining life of PP-materials in current components. Project outline - An inventory, contact and choice of facilities for closer cooperation. Plants with high proportions of PP in the equipment have been prioritised. - Visits to the chosen sites during shut-down periods for inspection and collection of samples from different PP details for further analysis in the laboratory. Collection of operating data and experiences of the use of PP (operating time/exposure conditions in different parts, component substitutions that have been made, etc.). - Systematic studies of the processes and mechanisms for stabiliser consumption over time. - Developing methods and methodology on which advice and guidance can be based so that the quality of PP-materials can be ensured for a given desired service life. The goal is to be able to assess the status and remaining service-life of the PP-materials in flue-gas applications. Results and Conclusions: It has been found that corrosion is relatively rare and that the main factors limiting the use and longevity of polypropylene are the thermal properties (thermal expansion and heat distortion). Leaching of stabilisers from the material is also commonly found but only a few cases of oxidative degradation, as a result of this, have been observed. An important part of the project has been to develop techniques and methodologies to assure the quality PP-material for a desired service life, and to assess the status and remaining life of the PP- materials in flue-gas applications. To do this, samples that

  18. Accelerated life assessment of coating on the radar structure components in coastal environment.

    Science.gov (United States)

    Liu, Zhe; Ming, ZhiMao

    2016-07-04

    This paper aimed to build an accelerated life test scheme and carry out quantitative analysis between accelerated life test in the laboratory and actual service for the coating composed of epoxy primer and polyurethane paint on structure components of some kind of radar served in the coastal environment of South China Sea. The accelerated life test scheme was built based on the service environment and failure analysis of the coating. The quantitative analysis between accelerated life test and actual service was conducted by comparing the gloss loss, discoloration, chalking, blistering, cracking and electrochemical impedance spectroscopy of the coating. The main factors leading to the coating failure were ultraviolet radiation, temperature, moisture, salt fog and loads, the accelerated life test included ultraviolet radiation, damp heat, thermal shock, fatigue and salt spray. The quantitative relationship was that one cycle of the accelerated life test was equal to actual service for one year. It was established that one cycle of the accelerated life test was equal to actual service for one year. It provided a precise way to predict actual service life of newly developed coatings for the manufacturer.

  19. Activity and Life After Survival of a Cardiac Arrest (ALASCA and the effectiveness of an early intervention service: design of a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Bakx Wilbert GM

    2007-08-01

    Full Text Available Abstract Background Cardiac arrest survivors may experience hypoxic brain injury that results in cognitive impairments which frequently remain unrecognised. This may lead to limitations in daily activities and participation in society, a decreased quality of life for the patient, and a high strain for the caregiver. Publications about interventions directed at improving quality of life after survival of a cardiac arrest are scarce. Therefore, evidence about effective rehabilitation programmes for cardiac arrest survivors is urgently needed. This paper presents the design of the ALASCA (Activity and Life After Survival of a Cardiac Arrest trial, a randomised, controlled clinical trial to evaluate the effects of a new early intervention service for survivors of a cardiac arrest and their caregivers. Methods/design The study population comprises all people who survive two weeks after a cardiac arrest and are admitted to one of the participating hospitals in the Southern part of the Netherlands. In a two-group randomised, controlled clinical trial, half of the participants will receive an early intervention service. The early intervention service consists of several consultations with a specialised nurse for the patient and their caregiver during the first three months after the cardiac arrest. The intervention is directed at screening for cognitive problems, provision of informational, emotional and practical support, and stimulating self-management. If necessary, referral to specialised care can take place. Persons in the control group will receive the care as usual. The primary outcome measures are the extent of participation in society and quality of life of the patient one year after a cardiac arrest. Secondary outcome measures are the level of cognitive, emotional and cardiovascular impairment and daily functioning of the patient, as well as the strain for and quality of life of the caregiver. Participants and their caregivers will be followed

  20. Marketing concepts for pharmaceutical service development.

    Science.gov (United States)

    Grauer, D W

    1981-02-01

    Marketing concepts as a mechanism to help pharmacy develop, communicate, and sell future pharmaceutical services to consumers are discussed. Pharmacy as a profession must define itself broadly to take advantage of future growth opportunities. These growth opportunities will be realized from unmet health-care needs and changing consumer life style trends and values. New services must therefore be oriented toward consumers (i.e., patients, health professionals, and third-party agencies) to gain acceptance. Dispensing and drug-knowledge-distribution pharmaceutical services are reviewed by a product life cycle analysis of sales profits versus time. A marketing mix for new pharmaceutical services is developed consisting of service, price, distribution, and promotion strategies. Marketing can encompass those key elements necessary to meet the organizational goals of pharmacy and provide a systematic, disciplined approach for presenting a new service to consumers.

  1. The factor of time in the life cycle assessment of housing

    NARCIS (Netherlands)

    Klunder, G.; van Nunen, H.

    2003-01-01

    Conducting life cycle assessments, or LCAs, involves many uncertainties, including those related to the factor of time. Time is very important in the environmental assessment of housing, because of the relatively long service life of houses. During a house's service life many changes occur, which

  2. Identification and documentation of persons being in palliative phase regardless of age, diagnosis and places of care, and their use of a sitting service at the end of life.

    Science.gov (United States)

    Wallerstedt, Birgitta; Sahlberg-Blom, Eva; Benzein, Eva; Andershed, Birgitta

    2012-09-01

    Older persons and persons with diseases other than cancer are often discriminated against when applying for palliative care despite growing numbers of both older persons and individuals with chronic diseases. An intention for palliative care in Sweden is that all persons in the final stage of life, irrespective of age, domicile, diagnosis, and care place shall have access to palliative care on equal terms. One way to support these persons in final stage of life and their relatives is to offer sitting service. To describe individuals who were identified and documented as being in a palliative phase in a Swedish municipality, with respect to demographics, use of a sitting service, continuity of care in the last month of life and the place of death. A second aim was to describe and compare the groups who received/did not receive sitting services related to the aforementioned variables. Retrospective data from nursing records and palliative care identification forms were analyzed with descriptive and analytic statistical methods. Among individuals deceased during 2007, 51% were identified and documented as being in palliative phase. The majority was older people (mean 83 years) with a noncancer diagnosis (58%). Twenty-eight individuals (16%) had received a sitting service between 8 and 249 hours (one extreme value = 2211). It is indicated that sitting service significantly increased the possibility of dying at home (p = 0.00004), but did not affect how often the place of care changed during the last month of life. A small sample from a Swedish context must be considered. These results can be related to an awareness in the municipality that led to adopting the concept of palliative care as not only for those with a cancer diagnosis. 2012 The Authors. Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.

  3. Successful outsourcing: improving quality of life through integrated support services.

    Science.gov (United States)

    Bates, Jason; Sharratt, Martin; King, John

    2014-01-01

    This article examines the way that non-clinical support services are provided in healthcare settings through outsourcing partnerships. The integrated support services model and benefits to patient experience and safety as well as organizational efficiency and effectiveness are explored through an examination of services at a busy urban community hospital.

  4. Unmet Support Service Needs and Health-Related Quality of Life among Adolescents and Young Adults with Cancer: The AYA HOPE Study

    Directory of Open Access Journals (Sweden)

    Ashley Wilder Smith

    2013-04-01

    Full Text Available Introduction: Cancer for adolescents and young adults (AYA differs from younger and older patients; AYA face medical challenges while navigating social and developmental transitions. Research suggests that these patients are under- or inadequately served by current support services, which may affect health-related quality of life (HRQOL.Methods: We examined unmet service needs and HRQOL in the National Cancer Institute’s Adolescent and Young Adult Health Outcomes and Patient Experience (AYA HOPE study, a population-based cohort (n=484, age 15-39, diagnosed with cancer 6-14 months prior, in 2007-2009. Unmet service needs were psychosocial, physical, spiritual, and financial services where respondents endorsed that they needed, but did not receive, a listed service. Linear regression models tested associations between any or specific unmet service needs and HRQOL, adjusting for demographic, medical and health insurance variables.Results: Over one-third of respondents reported at least one unmet service need. The most common were financial (16%, mental health (15%, and support group (14% services. Adjusted models showed that having any unmet service need was associated with worse overall HRQOL, fatigue, physical, emotional, social, and school/work functioning, and mental health (p’s<0.0001. Specific unmet services were related to particular outcomes (e.g., needing pain management was associated with worse overall HRQOL, physical and social functioning (p’s<0.001. Needing mental health services had the strongest associations with worse HRQOL outcomes; needing physical/occupational therapy was most consistently associated with poorer functioning across domains.Discussion: Unmet service needs in AYAs recently diagnosed with cancer are associated with worse HRQOL. Research should examine developmentally appropriate, relevant practices to improve access to services demonstrated to adversely impact HRQOL, particularly physical therapy and mental

  5. An End of Service Life Assessment of PMMA Lenses from Veteran Concentrator Photovoltaic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C.; Khonkar, Hussameldin I.; Herrero, Rebecca; Anton, Ignacio; Johnson, David K.; Vinzant, Todd B.; Deutch, Steve; To, Bobby; Sala, Gabriel; Kurtz, Sarah R.

    2017-03-21

    The optical performance of poly(methyl methacrylate) lenses from veteran concentrator photovoltaic modules was examined after the end of their service life. Lenses from the Martin-Marietta and Intersol module designs were examined from the 'Solar Village' site near Riyadh, Saudi Arabia, as well as the Phoenix Sky Harbor airport, followed by the Arizona Public Service Solar Test and Research (APS-STaR) center in Tempe, Arizona. The various lens specimens were deployed for 20, 27, and 22 years, respectively. Optical characterizations included lens efficiency (Solar Simulator instrument), material transmittance and haze (of coupons cut from veteran lenses, then measured again after their faceted back surface was polished, and then measured again after the incident front surface was polished), and direct transmittance (as a function of detector's acceptance angle, using the Very Low Angular Beam Spread ('VLABS') instrument). Lens efficiency measurements compared the central region to the entire lens, also using hot and cold mirror measurements to diagnose differences in performance. A series of subsequent characterizations was performed because a decrease in performance of greater than 10% was observed for some of the veteran lenses. Surface roughness was examined using atomic force microscopy and scanning electron microscopy. Facet geometry (tip and valley radius) was quantified on cross-sectioned specimens. Molecular weight was compared between the incident and faceted surfaces of the lenses.

  6. A web environment for inspection service

    International Nuclear Information System (INIS)

    Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

    2013-01-01

    The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

  7. A falls prevention programme to improve quality of life, physical function and falls efficacy in older people receiving home help services: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Bjerk, Maria; Brovold, Therese; Skelton, Dawn A; Bergland, Astrid

    2017-08-14

    Falls and fall-related injuries in older adults are associated with great burdens, both for the individuals, the health care system and the society. Previous research has shown evidence for the efficiency of exercise as falls prevention. An understudied group are older adults receiving home help services, and the effect of a falls prevention programme on health-related quality of life is unclear. The primary aim of this randomised controlled trial is to examine the effect of a falls prevention programme on quality of life, physical function and falls efficacy in older adults receiving home help services. A secondary aim is to explore the mediating factors between falls prevention and health-related quality of life. The study is a single-blinded randomised controlled trial. Participants are older adults, aged 67 or older, receiving home help services, who are able to walk with or without walking aids, who have experienced at least one fall during the last 12 months and who have a Mini Mental State Examination of 23 or above. The intervention group receives a programme, based on the Otago Exercise Programme, lasting 12 weeks including home visits and motivational telephone calls. The control group receives usual care. The primary outcome is health-related quality of life (SF-36). Secondary outcomes are leg strength, balance, walking speed, walking habits, activities of daily living, nutritional status and falls efficacy. All measurements are performed at baseline, following intervention at 3 months and at 6 months' follow-up. Sample size, based on the primary outcome, is set to 150 participants randomised into the two arms, including an estimated 15-20% drop out. Participants are recruited from six municipalities in Norway. This trial will generate new knowledge on the effects of an exercise falls prevention programme among older fallers receiving home help services. This knowledge will be useful for clinicians, for health managers in the primary health care service

  8. Comparing the Life Cycle Energy Consumption, Global ...

    Science.gov (United States)

    Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

  9. Bespoke program design for school-aged therapy disability service delivery.

    Science.gov (United States)

    Weatherill, Pamela; Bahn, Susanne; Cooper, Trudi

    2012-01-01

    This article uses the evaluation of a school-aged therapy service for children with disabilities in Western Australia to investigate models of service delivery. The current literature on family-centered practice, multidisciplinary and transdisciplinary approaches, and 4 models of service are reviewed. The models include the life needs model, the relational goal-orientated model of optimal service delivery to children and families, the quality of life model, and the collaborative model of service delivery. Analysis of the data is presented together with a bespoke model of service delivery for children with disabilities, arguing that local contexts benefit from custom-made service design.

  10. Extending the Service Life of Pavements

    Science.gov (United States)

    Gschwendt, Ivan

    2018-03-01

    The cost of road construction and expenditures on the maintenance of pavements, i.e., their whole life cost, represents a lot of money. The paper describes a procedure for a pavement management system with degradation models and estimates the length of time for the rehabilitation of an asphalt pavement. Using a theory of pavement mechanics, we calculated the stresses and strains on the layers of two pavement models. High modulus asphalt concrete, an asphalt mix with a high binder content, and an asphalt mix with binder modifications are new road building materials. Prolonging the time for the rehabilitation of pavements is possible.

  11. Challenges in Designing and Scaling-up Community Services

    DEFF Research Database (Denmark)

    Morelli, Nicola

    2014-01-01

    of services. Both projects are highly related to a real life context for senior people (Life 2.0) and people with brain injury and their assistants (MyN). Several analogies could be found, between the existing generation of social networking platforms and the services proposed in these projects, however...... 2.0. This paper analyses the lesson learned from the work undertaken so far and proposes criteria and hypotheses for the diffusion of this kind of services....

  12. Determinants of Customer Satisfaction and Loyalty in Vietnamese Life-Insurance Setting

    Directory of Open Access Journals (Sweden)

    Ha Thu Nguyen

    2018-04-01

    Full Text Available Sustainable services are often regarded as sustainable strategies and operations producing goods and services that satisfy customer needs and significantly improve social and environmental performance. To be sustainable, service providers must satisfy consumers’ needs or otherwise they will become redundant and economically irrelevant. This paper presents the results of an empirical study on the determinants of customer satisfaction and loyalty in life-insurance services in Vietnam based on a database collected through a questionnaire survey of 1476 customers during 2017. A path analysis technique is applied to test the proposed framework on the direct and indirect relationship between variables. The results of statistical analysis indicate that customer satisfaction in life-insurance services is significantly explained by such factors as corporate image, service quality and perceived value. Our findings suggest that a life-insurance service provider should focus on enhancing service quality and corporate image in order to obtain customer satisfaction that leads to customer loyalty.

  13. Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models

    Science.gov (United States)

    J.E. Winandy; P.K. Lebow; J.F. Murphy

    2002-01-01

    Research programs throughout North America are increasingly focusing on understanding and defining the salient issues of wood durability and maintaining and extending the serviceability of existing wood structures. This report presents the findings and implications of a 10-year research program, carried out at the USDA Forest Service, Forest Products Laboratory, to...

  14. ‘Why does it happen like this?’ Consulting with users and providers prior to an evaluation of services for children with life limiting conditions and their families

    Science.gov (United States)

    Brown, Erica; Coad, Jane; Staniszewska, Sophie; Hacking, Suzanne; Chesworth, Brigit; Chambers, Lizzie

    2015-01-01

    Children with life limiting conditions and their families have complex needs. Evaluations must consider their views and perspectives to ensure care is relevant, appropriate and acceptable. We consulted with children, young people, their parents and local professionals to gain a more informed picture of issues affecting them prior to preparing a bid to evaluate services in the area. Multiple methods included focus groups, face-to-face and telephone interviews and participatory activities. Recordings and products from activities were analysed for content to identify areas of relevance and concern. An overarching theme from parents was ‘Why does it happen like this?’ Services did not seem designed to meet their needs. Whilst children and young people expressed ideas related to quality of environment, services and social life, professionals focused on ways of meeting the families’ needs. The theme that linked families’ concerns with those of professionals was ‘assessing individual needs’. Two questions to be addressed by the evaluation are (1) to what extent are services designed to meet the needs of children and families and (2) to what extent are children, young people and their families consulted about what they need? Consultations with families and service providers encouraged us to continue their involvement as partners in the evaluation. PMID:24270996

  15. Germany: the government has approved of the extension of the service life of nuclear reactors

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    The German coalition government has decided on 28 september 2009 to expend the service life of the 17 operating nuclear reactors through the approval of the plan 'Energy 2050'. The average extension will be of 12 years. This decision will postpone the shutdown of the last reactor till 2040. The reciprocal arrangement implies that the nuclear plant operators (EON, RWE, Wattenfall and EnBW) will have to pay an annual tax of 2.3*10 9 euros till 2016. The operators will also have to finance a capital for the development of renewable energies: 200*10 6 euros in 2011 and in 2012 then 300*10 6 euros per year between 2013 and 2016 and eventually to pay a tax of 9 euros per MW of nuclear power produced. (A.C.)

  16. How does substrate roughness affect the service life of a superhydrophobic coating?

    Science.gov (United States)

    Zhang, Xin; Mo, Jiliang; Si, Yifan; Guo, Zhiguang

    2018-05-01

    Although the development of superhydrophobic coatings is rapidly maturing, issues related to their low mechanical durability persist. In this context, the effect of substrate roughness on the service life of superhydrophobic coatings was studied. In this study, superhydrophobic coatings were fabricated on sandpapers of different roughness and reciprocating wear tests were conducted. The wear-resistance number of the superhydrophobic coating, defined as the maximum number of friction cycles after which the superhydrophobic surface started to lose its superhydrophobicity, increased from 50 to 24,000 with an increase in the substrate roughness from 2000 CW to 240 CW (CW is defined as the number of particles arranged in an inch), while it decreased from 24,000 to 17,000 with a further increase in the substrate roughness from 240 CW to 60 CW. Observations of the surface structure and wear analyses indicated that the superhydrophobic material infiltrated the spaces between the sand grains, and the rough peaks could consequently protect the superhydrophobic material during the wear tests. However, this protection weakens when the substrate roughness increases or decreases beyond certain values. Furthermore, these phenomena and results were also verified by applying the superhydrophobic coatings to different types of common substrates.

  17. Enhanced reproducibility of SADI web service workflows with Galaxy and Docker.

    Science.gov (United States)

    Aranguren, Mikel Egaña; Wilkinson, Mark D

    2015-01-01

    Semantic Web technologies have been widely applied in the life sciences, for example by data providers such as OpenLifeData and through web services frameworks such as SADI. The recently reported OpenLifeData2SADI project offers access to the vast OpenLifeData data store through SADI services. This article describes how to merge data retrieved from OpenLifeData2SADI with other SADI services using the Galaxy bioinformatics analysis platform, thus making this semantic data more amenable to complex analyses. This is demonstrated using a working example, which is made distributable and reproducible through a Docker image that includes SADI tools, along with the data and workflows that constitute the demonstration. The combination of Galaxy and Docker offers a solution for faithfully reproducing and sharing complex data retrieval and analysis workflows based on the SADI Semantic web service design patterns.

  18. Life Satisfaction in Persons with Intellectual Disabilities

    Science.gov (United States)

    Lucas-Carrasco, Ramona; Salvador-Carulla, Luis

    2012-01-01

    We appraised life satisfaction using the Satisfaction with Life Scale (SWLS), and analysed its psychometric properties in persons with intellectual disability (ID). Ninety-nine persons with ID from four services in Spain participated. A battery of subjective assessments was used, including the SWLS, a Quality of Life measure (WHOQOL-BREF), and…

  19. The effect of service satisfaction and spiritual well-being on the quality of life of patients with schizophrenia.

    Science.gov (United States)

    Lanfredi, Mariangela; Candini, Valentina; Buizza, Chiara; Ferrari, Clarissa; Boero, Maria E; Giobbio, Gian M; Goldschmidt, Nicoletta; Greppo, Stefania; Iozzino, Laura; Maggi, Paolo; Melegari, Anna; Pasqualetti, Patrizio; Rossi, Giuseppe; de Girolamo, Giovanni

    2014-05-15

    Quality of life (QOL) has been considered an important outcome measure in psychiatric research and determinants of QOL have been widely investigated. We aimed at detecting predictors of QOL at baseline and at testing the longitudinal interrelations of the baseline predictors with QOL scores at a 1-year follow-up in a sample of patients living in Residential Facilities (RFs). Logistic regression models were adopted to evaluate the association between WHOQoL-Bref scores and potential determinants of QOL. In addition, all variables significantly associated with QOL domains in the final logistic regression model were included by using the Structural Equation Modeling (SEM). We included 139 patients with a diagnosis of schizophrenia spectrum. In the final logistic regression model level of activity, social support, age, service satisfaction, spiritual well-being and symptoms' severity were identified as predictors of QOL scores at baseline. Longitudinal analyses carried out by SEM showed that 40% of QOL follow-up variability was explained by QOL at baseline, and significant indirect effects toward QOL at follow-up were found for satisfaction with services and for social support. Rehabilitation plans for people with schizophrenia living in RFs should also consider mediators of change in subjective QOL such as satisfaction with mental health services. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  20. Quality of Life for Individuals with Hearing Impairment Who Have Not Consulted for Services and Their Significant Others: Same- and Different-Sex Couples

    Science.gov (United States)

    Kelly, Rebecca J.; Atcherson, Samuel R.

    2011-01-01

    The purpose of this exploratory study was to assess perceptions of quality of life for individuals with hearing impairment who have not consulted for services and their significant others who are in same-sex relationships vs. those who are in different-sex relationships. Data were collected on a total of 20 older couples: 10 in same-sex…

  1. The EMBRACE web service collection.

    NARCIS (Netherlands)

    Pettifer, S.; Ison, J.; Kalas, M.; Thorne, D.; McDermott, P.; Jonassen, I.; Liaquat, A.; Fernandez, J.M.; Rodriguez, J.M.; Pisano, D.G.; Blanchet, C; Uludag, M.; Rice, P.; Bartaseviciute, E.; Rapacki, K.; Hekkelman, M.L.; Sand, O.; Stockinger, H.; Clegg, A.B.; Bongcam-Rudloff, E.; Salzemann, J.; Breton, V.; Attwood, T.K.; Cameron, G.; Vriend, G.

    2010-01-01

    The EMBRACE (European Model for Bioinformatics Research and Community Education) web service collection is the culmination of a 5-year project that set out to investigate issues involved in developing and deploying web services for use in the life sciences. The project concluded that in order for

  2. Considerations related to plant life management for Cernavoda-1

    International Nuclear Information System (INIS)

    Cojan, Mihail

    2002-01-01

    Cernavoda-1 NPP, the first CANDU 6 Unit in Eastern Europe, is one of the original five CANDU 6 plants and the first CANDU 6 producing over 700 MWe. CANDU Pressurized Heavy Water Reactors (PHWR) continues to play a significant role in electricity supply both in Canada and some offshore countries (Korea, Argentina, Romania). The commercial versions of CANDU reactors were put into service more than 30 years ago. While the first series of CANDU 6 plants (which entered service in the early 1980's) have now reached the middle portion of their 30 years design life, the Cernavoda-1 was put into service on 2 December 1996. However, the Cernavoda-1 Plant Life Management should be an increasingly important program to Utility ('CNE-Prod') in order to protect the investment and the continued success of plant operation. Over the past three years, INR (Institute for Nuclear Research - Romania) has been working with AECL-Canada on R and D Programs to support a comprehensive and integrated Cernavoda-1 Plant Life Management (PLiM) program that will see the Cernavoda-1 NPP successfully and reliably through to design life and beyond. The PLiM program has a focus on critical systems, structures, and components (CSSCs) and will be applied in three phases: Phase 1 - Planning (assessment and recommendations); Phase 2 - Life attainment implementation, and; Phase 3 - Plant Life Extension (PLEx), also known as plant extended operation. The key activities during each phase are shown. The schedule of each Phase are shown using the in service date of 1983 as the basis. This schedule applies to three original CANDU 6 plants with an in-service date of 1983: Point Lepreau, Gentilly-2, Wolsong-1 and shortly thereafter (1984) the 4th original CANDU 6 Embalse NPP was declared in service. Cernavoda-1 is the 5th original CANDU 6 plant and was put into service on 2 December 1996 (on site activities were started in 1980). The paper will describe the elements of an integrated program, the multiphase

  3. Clinical Utility and Psychometric Properties of the Traumatic Brain Injury Quality of Life Scale (TBI-QOL) in US Military Service Members.

    Science.gov (United States)

    Lange, Rael T; Brickell, Tracey A; Bailie, Jason M; Tulsky, David S; French, Louis M

    2016-01-01

    To examine the clinical utility and psychometric properties of the Traumatic Brain Injury Quality of Life (TBI-QOL) scale in a US military population. One hundred fifty-two US military service members (age: M = 34.3, SD = 9.4; 89.5% men) prospectively enrolled from the Walter Reed National Military Medical Center and other nationwide community outreach initiatives. Participants included 99 service members who had sustained a mild traumatic brain injury (TBI) and 53 injured or noninjured controls without TBI (n = 29 and n = 24, respectively). Participants completed the TBI-QOL scale and 5 other behavioral measures, on average, 33.8 months postinjury (SD = 37.9). Fourteen TBI-QOL subscales; Neurobehavioral Symptom Inventory; Posttraumatic Stress Disorder Checklist-Civilian version; Alcohol Use Disorders Identification Test; Combat Exposure Scale. The internal consistency reliability of the TBI-QOL scales ranged from α = .91 to α = .98. The convergent and discriminant validity of the 14 TBI-QOL subscales was high. The mild TBI group had significantly worse scores on 10 of the 14 TBI-QOL subscales than the control group (range, P quality of life in a mild TBI military sample. Additional research is recommended to further evaluate the clinical utility of the TBI-QOL scale in both military and civilian settings.

  4. A future for nuclear sites beyond their service life. Nuclear site value development

    International Nuclear Information System (INIS)

    2008-01-01

    As the nuclear industry moves into a new development phase, many facilities built in the fifties and sixties are reaching the end of their service life. Dismantling them and rehabilitating the sites on which they stand is a major industrial challenge which will give rise to a number of new projects. AREVA has more than 20 years' experience in these highly technical fields. As more and more sites reach the end of their service life, AREVA considers nuclear site value development as a fully-fledged industrial activity. The group's competencies in this field have been grouped together to form a dedicated entity: the Nuclear Site Value Development Business Unit, created in 2008. Several billion euros are invested in site value development projects which are far-reaching and complex, and often last for several decades. Long before work actually begins, lengthy studies and preparations are required to schedule operations, select the techniques to be used and optimize costs and deadlines. The Nuclear Site Value Development BU is currently working on four major projects involving its own facilities and those of the CEA: - La Hague: dismantling of the first generation of used fuel recycling facilities. Between 1966 and 1998, almost 5,000 tons of used fuel from graphite-moderated gas-cooled reactors, 4,500 tons of light water reactor fuel, as well as fuel from fast reactors and research reactors, were treated at UP2 400, the very first industrial recycling plant on the La Hague site. - Marcoule: first-time dismantling of a recycling plant. 1,000 rooms to be cleaned up, 30,000 tons of waste to be treated, 30 years of work. - Cadarache: first-time dismantling of a Mox fuel fabrication plant. The Cadarache plant was commissioned in 1962 to fabricate fuel for fast reactors; this was followed by MOX fuel for light water reactors, an activity which continued until the plant was shut down in 2003. - Annecy and Veurey: giving a new lease of life to former industrial sites in built

  5. Fuzzy Life-Extending Control of Anti-Lock Braking System

    Directory of Open Access Journals (Sweden)

    Ahmed M. El-Garhy

    2013-12-01

    Full Text Available The repeated operation of the Anti-Lock Braking System (ABS causes accumulation of structural damages in its different subsystems leading to reduction in their functional life time. This paper proposes a Fuzzy Logic based Life-Extending Control (FLEC system for increasing the service life of the ABS. FLEC achieves significant improvement in service life by the trade-off between satisfactory dynamic performance and safe operation. The proposed FLEC incorporates structural damage model of the ABS. The model utilizes the dynamic behavior of the ABS and predicts the wear rates of the brake pads/disc. Based on the predicted wear rates, the proposed fuzzy logic controller modifies its control strategy on-line to keep safe operation leading to increase in service time of the ABS. FLEC is fine tuned via genetic algorithm and its effectiveness is verified through simulations of emergency stops of a passenger vehicle model.

  6. Evaluation of local corrosion life by statistical method

    International Nuclear Information System (INIS)

    Kato, Shunji; Kurosawa, Tatsuo; Takaku, Hiroshi; Kusanagi, Hideo; Hirano, Hideo; Kimura, Hideo; Hide, Koichiro; Kawasaki, Masayuki

    1987-01-01

    In this paper, for the purpose of achievement of life extension of light water reactor, we examined the evaluation of local corrosion by satistical method and its application of nuclear power plant components. There are many evaluation examples of maximum cracking depth of local corrosion by dowbly exponential distribution. This evaluation method has been established. But, it has not been established that we evaluate service lifes of construction materials by satistical method. In order to establish of service life evaluation by satistical method, we must strive to collect local corrosion dates and its analytical researchs. (author)

  7. CANDU plant life management - An integrated approach

    International Nuclear Information System (INIS)

    Charlebois, P.; Hart, R.S.; Hopkins, J.R.

    1998-01-01

    Commercial versions of CANDU reactors were put into service starting more than 25 years ago. The first unit of Ontario Hydro's Pickering A station was put into service in 1971, and Bruce A in 1977. Most CANDU reactors, however, are only now approaching their mid-life of 15 to 20 years of operation. In particular, the first series of CANDU 6 plants which entered service in the early 1980's were designed for a 30 year life and are now approaching mid life. The current CANDU 6 design is based on a 40 year life as a result of advancement in design and materials through research and development. In order to assure safe and economic operation of these reactors, a comprehensive CANDU Plant Life Management (PLIM) program is being developed from the knowledge gained during the operation of Ontario Hydro's Pickering, Bruce, and Darlington stations, worldwide information from CANDU 6 stations, CANDU research and development programs, and other national and international sources. This integration began its first phase in 1994, with the identification of most of the critical systems structures and components in these stations, and a preliminary assessment of degradation and mechanisms that could affect their fitness for service for their planned life. Most of these preliminary assessments are now complete, together with the production of the first iteration of Life Management Plans for several of the systems and components. The Generic CANDU 6 PLIM program is now reaching its maturity, with formal processes to systematically identify and evaluate the major CSSCs in the station, and a plan to ensure that the plant surveillance, operation, and maintenance programs monitor and control component degradation well within the original design specifications essential for the plant life attainment. A Technology Watch program is being established to ensure that degradation mechanisms which could impact on plant life are promptly investigated and mitigating programs established. The

  8. Analysing scientific workflows: Why workflows not only connect web services

    NARCIS (Netherlands)

    Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, L.J.

    2009-01-01

    Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

  9. Analysing scientific workflows: why workflows not only connect web services

    NARCIS (Netherlands)

    Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, LJ.

    2009-01-01

    Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

  10. Current HIV/AIDS end-of-life care in sub-Saharan Africa: a survey of models, services, challenges and priorities

    Directory of Open Access Journals (Sweden)

    O'Neill Joseph F

    2003-10-01

    Full Text Available Abstract Background In response to increased global public health funding initiatives to HIV/AIDS care in Africa, this study aimed to describe practice models, strategies and challenges to delivering end-of-life care in sub-Saharan Africa. Methods A survey end-of-life care programs was conducted, addressing the domains of service aims and configuration, barriers to pain control, governmental endorsement and strategies, funding, monitoring and evaluation, and research. Both closed and qualitative responses were sought. Results Despite great structural challenges, data from 48 programs in 14 countries with a mean annual funding of US $374,884 demonstrated integrated care delivery across diverse settings. Care was commonly integrated with all advanced disease care (67% and disease stages (65% offering care from diagnosis. The majority (98% provided home-based care for a mean of 301 patients. Ninety-four percent reported challenges in pain control (including availability, lack of trained providers, stigma and legal restrictions, and 77% addressed the effects of poverty on disease progression and management. Although 85% of programs reported Government endorsement, end-of-life and palliative care National strategies were largely absent. Conclusions The interdependent tasks of expanding pain control, balancing quality and coverage of care, providing technical assistance in monitoring and evaluation, collaborating between donor agencies and governments, and educating policy makers and program directors of end-of-life care are all necessary if resources are to reach their goals.

  11. Semantic-JSON: a lightweight web service interface for Semantic Web contents integrating multiple life science databases.

    Science.gov (United States)

    Kobayashi, Norio; Ishii, Manabu; Takahashi, Satoshi; Mochizuki, Yoshiki; Matsushima, Akihiro; Toyoda, Tetsuro

    2011-07-01

    Global cloud frameworks for bioinformatics research databases become huge and heterogeneous; solutions face various diametric challenges comprising cross-integration, retrieval, security and openness. To address this, as of March 2011 organizations including RIKEN published 192 mammalian, plant and protein life sciences databases having 8.2 million data records, integrated as Linked Open or Private Data (LOD/LPD) using SciNetS.org, the Scientists' Networking System. The huge quantity of linked data this database integration framework covers is based on the Semantic Web, where researchers collaborate by managing metadata across public and private databases in a secured data space. This outstripped the data query capacity of existing interface tools like SPARQL. Actual research also requires specialized tools for data analysis using raw original data. To solve these challenges, in December 2009 we developed the lightweight Semantic-JSON interface to access each fragment of linked and raw life sciences data securely under the control of programming languages popularly used by bioinformaticians such as Perl and Ruby. Researchers successfully used the interface across 28 million semantic relationships for biological applications including genome design, sequence processing, inference over phenotype databases, full-text search indexing and human-readable contents like ontology and LOD tree viewers. Semantic-JSON services of SciNetS.org are provided at http://semanticjson.org.

  12. Assessing the impact of care farms on quality of life and offending: a pilot study among probation service users in England.

    Science.gov (United States)

    Elsey, Helen; Farragher, Tracey; Tubeuf, Sandy; Bragg, Rachel; Elings, Marjolein; Brennan, Cathy; Gold, Rochelle; Shickle, Darren; Wickramasekera, Nyantara; Richardson, Zoe; Cade, Janet; Murray, Jenni

    2018-03-17

    To assess the feasibility of conducting a cost-effectiveness study of using care farms (CFs) to improve quality of life and reduce reoffending among offenders undertaking community orders (COs). To pilot questionnaires to assess quality of life, connection to nature, lifestyle behaviours, health and social-care use. To assess recruitment and retention at 6 months and feasibility of data linkage to Police National Computer (PNC) reconvictions data and data held by probation services. Pilot study using questionnaires to assess quality of life, individually linked to police and probation data. The pilot study was conducted in three probation service regions in England. Each site included a CF and at least one comparator CO project. CFs are working farms used with a range of clients, including offenders, for therapeutic purposes. The three CFs included one aquaponics and horticulture social enterprise, a religious charity focusing on horticulture and a family-run cattle farm. Comparator projects included sorting secondhand clothes and activities to address alcohol misuse and anger management. We recruited 134 adults (over 18) serving COs in England, 29% female. 52% of participants completed follow-up questionnaires. Privatisation of UK probation trusts in 2014 negatively impacted on recruitment and retention. Linkage to PNC data was a more successful means of follow-up, with 90% consenting to access their probation and PNC data. Collection of health and social-care costs and quality-adjusted life year derivation were feasible. Propensity score adjustment provided a viable comparison method despite differences between comparators. We found worse health and higher reoffending risk among CF participants due to allocation of challenging offenders to CFs, making risk of reoffending a confounder. Recruitment would be feasible in a more stable probation environment. Follow-up was challenging; however, assessing reconvictions from PNC data is feasible and a potential primary

  13. ICT Services for Life Improvement for the Elderly.

    Science.gov (United States)

    Sánchez-Rico, Alejandro; Garel, Pascal; Notarangelo, Isabella; Quintana, Marcos; Hernández, Gustavo; Asteriadis, Stylianos; Popa, Mirela; Vretos, Nicholas; Solachidis, Vassilis; Burgos, Marta; Girault, Ariane

    2017-01-01

    Integrated care ICT Platform to support patients, care-givers and health/social professionals in the care of dementia and Parkinson's disease with training, empowerment, sensor-based data analysis and cooperation services based on user-friendly interfaces.

  14. A service life extension (SLEP) approach to operating aging aircraft beyond their original design lives

    Science.gov (United States)

    Pentz, Alan Carter

    With today's uncertain funding climate (including sequestration and continuing budget resolutions), decision makers face severe budgetary challenges to maintain dominance through all aspects of the Department of Defense (DoD). To meet war-fighting capabilities, the DoD continues to extend aircraft programs beyond their design service lives by up to ten years, and occasionally much more. The budget requires a new approach to traditional extension strategies (i.e., reuse, reset, and reclamation) for structural hardware. While extending service life without careful controls can present a safety concern, future operations planning does not consider how much risk is present when operating within sound structural principles. Traditional structural hardware extension methods drive increased costs. Decision makers often overlook the inherent damage tolerance and fatigue capability of structural components and rely on simple time- and flight-based cycle accumulation when determining aircraft retirement lives. This study demonstrates that decision makers should consider risk in addition to the current extension strategies. Through an evaluation of eight military aircraft programs and the application and simulation of F-18 turbine engine usage data, this dissertation shows that insight into actual aircraft mission data, consideration of fatigue capability, and service extension length are key factors to consider. Aircraft structural components, as well as many critical safety components and system designs, have a predefined level of conservatism and inherent damage tolerance. The methods applied in this study would apply to extensions of other critical structures such as bridges. Understanding how much damage tolerance is built into the design compared to the original design usage requirements presents the opportunity to manage systems based on risk. The study presents the sensitivity of these factors and recommends avenues for further research.

  15. Methodology for the Life Cycle Assessment of a Car-sharing Service

    OpenAIRE

    Guyon, Olivier

    2017-01-01

    Nowadays, circular economy is becoming more relevant in society. In the context of the automotive industry, we no longer simply work on emissions emitted during the vehicle use phase but rather on the environmental impacts induced during all phases of the vehicle's life cycle (manufacturing, logistics, use, maintenance and end of life). For this purpose, many automakers, including the Group PSA, use life cycle assessment (LCA) to determine these environmental impacts. Also, the economy of sha...

  16. Cloud-based Collaborative Business Services Provision

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Cordeiro, J.; Maciaszek, L.A.; Filipe, J.

    2014-01-01

    The notion of service-enhanced product, representing the association of services to manufactured products, offers an important mechanism for value creation and product differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Provision of

  17. The effect of a home delivery meal service of energy- and protein-rich meals on quality of life in malnourished outpatients suffering from lung cancer

    DEFF Research Database (Denmark)

    Leedo, Eva; Gade, Josephine; Granov, Sabrina

    2017-01-01

    Undernutrition is prevalent in cancer patients and associated with increased incidence of complications and mortality. We investigated the effects of a home delivery meal service, providing a selection of energy-dense, protein-rich meals, on quality of life (QoL) in malnourished lung cancer....... Intervention exerted a significant positive effect on performance score after 12 wk (P = 0.047). Increased energy and protein intakes were strongly associated with improved QoL, functional score, hand grip strength, symptom and performance scores. Food delivery service with energy- and protein-rich main meals...

  18. Methodological aspects to be considered in evaluating the economics of service measures

    International Nuclear Information System (INIS)

    Bald, M.

    1987-01-01

    For the purposes of the report, service measures is used as a term denoting all those steps which exceed the framework of normal in-service maintenance and repair and serve to improve economics over the normal case. Positive impacts are to be achieved on such parameters as availability, efficiency, and service life. One of the aspects investigated is the effect, if any, of such measures on the residual service life of plants in operation for a long period of time already. Residual service life in this case means the remaining span of effective technical and economic operation which, in these model calculations, also includes part of the period of depreciation. (orig.) [de

  19. Concepts of Life in the Contexts of Mars

    Science.gov (United States)

    Des Marais, D. J.

    2014-01-01

    The search for habitable environments and life requires a working concept of life's fundamental attributes. This concept helps to identify the "services" that an environment must provide to sustain life. We must consider the possibility that extraterrestrial life might differ fundamentally from our own, but it is still worthwhile to begin by hypothesizing attributes of life that might be universal versus ones that reflect local solutions to survival on Earth.

  20. Dementia as a determinant of social and health service use in the last two years of life 1996-2003

    Directory of Open Access Journals (Sweden)

    Raitanen Jani

    2011-04-01

    Full Text Available Abstract Background Dementia is one of the most common causes of death among old people in Finland and other countries with high life expectancies. Dementing illnesses are the most important disease group behind the need for long-term care and therefore place a considerable burden on the health and social care system. The aim of this study was to assess the effects of dementia and year of death (1998-2003 on health and social service use in the last two years of life among old people. Methods The data were derived from multiple national registers in Finland and comprise all those who died in 1998, 2002 or 2003 and 40% of those who died in 1999-2001 at the age of 70 or over (n = 145 944. We studied the use of hospitals, long-term care and home care in the last two years of life. Statistics were performed using binary logistic regression analyses and negative binomial regression analyses, adjusting for age, gender and comorbidity. Results The proportion of study participants with a dementia diagnosis was 23.5%. People with dementia diagnosis used long-term care more often (OR 9.30, 95% CI 8.60, 10.06 but hospital (OR 0.33, 95% CI 0.31, 0.35 and home care (OR 0.50, 95% CI 0.46, 0.54 less often than people without dementia. The likelihood of using university hospital and long-term care increased during the eight-year study period, while the number of days spent in university and general hospital among the users decreased. Differences in service use between people with and without dementia decreased during the study period. Conclusions Old people with dementia used long-term care to a much greater extent and hospital and home care to a lesser extent than those without dementia. This difference persisted even when controlling for age, gender and comorbidity. It is important that greater attention is paid to ensuring that old people with dementia have equitable access to care.

  1. Residual life assessment of thick wall boiler parts

    International Nuclear Information System (INIS)

    Mehdizadeh, M.; Rayatpour, M.

    2004-01-01

    Thick wall components of boiler, such as headers, main steam lines and hot reheat lines, operate at high temperature and stress condition. This condition makes various failure mechanisms to activate during service exposure that gradually deteriorate the microstructure of components. Consequently, knowing about metallurgical condition and remaining life sensitive components particularly in power plants with at least 100,000 her life time is of considerable importance. In this regard, to eliminate unexpected interruptions and reduce the repairing costs, life assessment technology is being used. Various life assessment methods have been developed for power plants components and entered industrial fields. In the present work, remaining life of drums, headers and main steam lines of a power plant were evaluated, using microstructural, hardness changes and dimensional checking methods with non destructive tests. The results show that, the components have appropriate condition according to their service life. Further more, it was revealed that hardness evaluation technique is not a reliable evaluation criteria and various methods should be used for accurate life assessment

  2. Rejuvenation of service exposed ammonia cracker tubes of cast Alloy 625 and their re-use

    Energy Technology Data Exchange (ETDEWEB)

    Singh, J.B., E-mail: jbsingh@barc.gov.in [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Verma, A. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Jaiswal, D.M.; Kumar, N.; Patel, R.D. [Heavy Water Board, Department of Atomic Energy, Anushakti Nagar, Mumbai 400094 (India); Chakravartty, J.K. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

    2015-09-17

    This study is an extension of a previous study undertaken to rejuvenate ammonia cracker tubes of Alloy 625 alloy that have been service exposed in heavy water plants for their full service life of 100,000 h. The service exposure caused significant microstructural modifications and deterioration in mechanical properties, and a solution annealing treatment of 2 h at 1160 °C rejuvenated all properties similar to those of the virgin alloy. The present study reports the evolution of microstructure and mechanical properties of a full service exposed centrifugally cast Alloy 625 tube that was put into service again for 55,000 h after receiving a rejuvenation treatment. During the second service, microstructural modifications, increase in strength and loss of ductility were on the lines of the work reported earlier. However, it was encouraging to observe that degraded properties after the second service life remained within the bounds of those of virgin and full service exposed tubes. The good performance of the rejuvenated tube during the second service life has been attributed to good control of operation parameters that limited the precipitation of grain boundary carbides during the first service life, which otherwise would have had a direct bearing on premature failure of tubes during their second service life.

  3. Life-long Services in the Field of Information and Communication Technologies (ICT in Romania during 2004-2007

    Directory of Open Access Journals (Sweden)

    Manuela Sofia Stănculescu

    2009-01-01

    Full Text Available This study presents the results of empirical research on life-long services in the domain of information and communication technologies (ICT carried out within the framework of the project Matching educational supply with labour market in ICT sector in Romania: horizon 2015, co-ordinated by Institute of World Economy. Survey sample includes all providers authorised by National Council for Adult Vocational Training (CNFPA, a part of EDCL certification bodies, Microsoft Net Academy (programme implemented by universities, but also by a specialized firm in vocational training selected in survey, Cisco Net Academy, in total 215 vocational training providers from all around the country, out of which 77 (36% are private companies. Empirical research results (52% response rate allowed to analyze the actual state of vocational training supply in Romania in the period 2004-2007, including: (i identifying the main pratices, strategies and problems of vocational training services providers in ICT sector; ii emphasizing the main characteristics of lifelong learning programmes in ICT sector provided between 2004 and 2007; (iii determining the programme types and their target segment of population; and (iv pointing out the mechanisms of adjusting the supply to labour market needs.

  4. Stress and quality of life among parents of children with congenital heart disease referred for psychological services.

    Science.gov (United States)

    Kaugars, Astrida; Shields, Clarissa; Brosig, Cheryl

    2018-01-01

    The study examined parent stress and health-related quality of life (HRQOL) among families of children with congenital heart disease (CHD) referred for psychological services. Parents of 54 children (85% boys) aged 3 to 13 (M age  = 7.48, SD = 2.38) completed measures to assess parenting stress (Parenting Stress Index - Short Form; Pediatric Inventory for Parents) and the PedsQL Family Impact Module. Medical information was retrieved from medical record review. Half of parents of children with single ventricle anatomy had clinically significant levels of parenting stress. Parents of children with single ventricle anatomy reported more frequent illness-related stress and more difficulty dealing with illness-related stress than parents of children with two ventricle anatomy. Younger gestational age at birth and referral for attention or behavior problems were associated with greater likelihood of parent at-risk psychosocial functioning. Among children referred for psychological services, many parents report significant stress and significant negative impact of the child's medical condition on the family. Results underscore the need to consider assessing parent psychosocial functioning and providing additional support for parents of children with CHD. © 2017 Wiley Periodicals, Inc.

  5. Coupling between cracking and permeability, a model for structure service life prediction

    International Nuclear Information System (INIS)

    Lasne, M.; Gerard, B.; Breysse, D.

    1993-01-01

    Many authors have chosen permeability coefficients (permeation, diffusion) as a reference for material durability and for structure service life prediction. When we look for designing engineered barriers for radioactive waste storage we find these macroscopic parameters very essential. In order to work with a predictive model of transfer properties evolution in a porous media (concrete, mortar, rock) we introduce a 'micro-macro' hierarchical model of permeability whose data are the total porosity and the pore size distribution. In spite of the simplicity of the model (very small CPU time consuming) comparative studies show predictive results for sound cement pastes, mortars and concretes. Associated to these works we apply a model of damage due to hydration processes at early ages to a container as a preliminary underproject for the definitive storage of Low Level radioactive Waste (LLW). Data are geometry, cement properties and damage measurement of concrete. This model takes into account the mechanical property of the concrete maturation (volumic variations during cement hydration can damage the structures). Some local microcracking can appear and affect the long term durability. Following these works we introduce our research program for the concrete cracking analysis. An experimental campaign is designed in order to determine damage-cracking-porosity-permeability coupling. (authors). 12 figs., 16 refs

  6. Service-learning abroad: a life-changing experience for nursing students.

    Science.gov (United States)

    Hawkins, Janice Evans; Vialet, Channel L

    2012-01-01

    Incorporating service-learning experiences into nursing education is one way to help prepare students for practice in a global, culturally diverse society. Partnering with a church with a long-term mission program in El Salvador offers the nursing school at Old Dominion University opportunity to develop a service-learning program and support healthcare missions.

  7. Examination of Life Satisfaction, Child Maltreatment Potential and Substance Use in Mothers Referred for Treatment by Child Protective Services for Child Neglect and Substance Abuse: Implications for Intervention Planning

    Science.gov (United States)

    Plant, Christopher P.; Donohue, Brad; Holland, Jason M.

    2015-01-01

    There is evidence to suggest mothers who are served by child protective service agencies are relatively dissatisfied in their lives, leading some investigators to conclude life dissatisfaction may be associated with child maltreatment. To assist in better understanding this relationship the Life Satisfaction Scale for Caregivers (LSSC) was psychometrically developed in a sample of 72 mothers who were referred for behavioral treatment for child neglect and substance abuse by caseworkers from a local child protective service agency. The LSSC was developed to assess mothers’ happiness in nine domains (family, friendships, employment/work, spirituality/religion, safety, sex life/dating, ability to avoid drugs, ability to avoid alcohol, control over one’s own life). Results indicated two factors that appeared to be relevant to Social Satisfaction and Safety and Control Satisfaction. Higher satisfaction scores on both of these scales were negatively associated with child maltreatment potential and substance use at baseline (i.e., positive urinalysis test). Mothers who exposed their children to substances in utero or in infancy (a distinct type of child neglect) were found to report higher satisfaction scores on the LSSC than other types of child neglect. Hispanic-American, African-American, and Caucasian women reported similar levels of life satisfaction. Application of the LSSC as a non-stigmatizing, wellness-focused instrument is discussed within the context of intervention planning. PMID:27617042

  8. Analysis on regulation strategies for extending service life of hydropower turbines

    Science.gov (United States)

    Yang, W.; Norrlund, P.; Yang, J.

    2016-11-01

    Since a few years, there has been a tendency that hydropower turbines experience fatigue to a greater extent, due to increasingly more regulation movements of governor actuators. The aim of this paper is to extend the service life of hydropower turbines, by reasonably decreasing the guide vane (GV) movements with appropriate regulation strategies, e.g. settings of PI (proportional-integral) governor parameters and controller filters. The accumulated distance and number of GV movements are the two main indicators of this study. The core method is to simulate the long-term GV opening of Francis turbines with MATLAB/Simulink, based on a sequence of one-month measurements of the Nordic grid frequency. Basic theoretical formulas are also discussed and compared to the simulation results, showing reasonable correspondence. Firstly, a model of a turbine governor is discussed and verified, based on on-site measurements of a Swedish hydropower plant. Then, the influence of governor parameters is discussed. Effects of different settings of controller filters (e.g. dead zone, floating dead zone and linear filter) are also examined. Moreover, a change in GV movement might affect the quality of the frequency control. This is also monitored via frequency deviation characteristics, determined by elementary simulations of the Nordic power system. The results show how the regulation settings affect the GV movements and frequency quality, supplying suggestions for optimizing the hydropower turbine operation for decreasing the wear and tear.

  9. Predicting use of case management support services for adolescents and adults living in community following brain injury: A longitudinal Canadian database study with implications for life care planning.

    Science.gov (United States)

    Baptiste, B; Dawson, D R; Streiner, D

    2015-01-01

    To determine factors associated with case management (CM) service use in people with traumatic brain injury (TBI), using a published model for service use. A retrospective cohort, with nested case-control design. Correlational and logistic regression analyses of questionnaires from a longitudinal community data base. Questionnaires of 203 users of CM services and 273 non-users, complete for all outcome and predictor variables. Individuals with TBI, 15 years of age and older. Out of a dataset of 1,960 questionnaires, 476 met the inclusion criteria. Eight predictor variables and one outcome variable (use or non-use of the service). Predictor variables considered the framework of the Behaviour Model of Health Service Use (BMHSU); specifically, pre-disposing, need and enabling factor groups as these relate to health service use and access. Analyses revealed significant differences between users and non-users of CM services. In particular, users were significantly younger than non-users as the older the person the less likely to use the service. Also, users had less education and more severe activity limitations and lower community integration. Persons living alone are less likely to use case management. Funding groups also significantly impact users. This study advances an empirical understanding of equity of access to health services usage in the practice of CM for persons living with TBI as a fairly new area of research, and considers direct relevance to Life Care Planning (LCP). Many life care planers are CM and the genesis of LCP is CM. The findings relate to health service use and access, rather than health outcomes. These findings may assist with development of a modified model for prediction of use to advance future cost of care predictions.

  10. International symposium on nuclear power plant life management. Book of extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    A number of nuclear power plants in operation are meeting the problems of aging. Besides maintaining safety and reliability many NPP owners are concerned with service life extension, life management policy, and reactor maintenance procedures. The topics covered in this report are devoted to: NPP life management, economics and technical aspects of service life extension, reactor licensing procedures; aging of reactor components; physical radiation effects on reactor materials; corrosion; mechanical properties of reactor materials; reactor control systems; reactor safety systems.

  11. International symposium on nuclear power plant life management. Book of extended synopses

    International Nuclear Information System (INIS)

    2002-01-01

    A number of nuclear power plants in operation are meeting the problems of aging. Besides maintaining safety and reliability many NPP owners are concerned with service life extension, life management policy, and reactor maintenance procedures. The topics covered in this report are devoted to: NPP life management, economics and technical aspects of service life extension, reactor licensing procedures; aging of reactor components; physical radiation effects on reactor materials; corrosion; mechanical properties of reactor materials; reactor control systems; reactor safety systems

  12. Stroke survivors’ levels of community reintegration, quality of life, satisfaction with the physiotherapy services and the level of caregiver strain at community health centres within the Johannesburg area

    Directory of Open Access Journals (Sweden)

    Adrian Kusambiza-Kiingi

    2017-03-01

    Full Text Available Background: Stroke survivors are discharged home before they are functionally independent and return home with activity limitations that would not be manageable without a caregiver. Aim: To determine stroke survivors’ levels of community reintegration, quality of life (QOL, satisfaction with the physiotherapy services and the level of caregiver strain at community health centres within the Johannesburg area. Method: This was a cross-sectional study using the following outcome measures: Maleka Stroke Community Reintegration Measure, Stroke-specific quality of life scale, Caregiver strain index and Physical therapy patient satisfaction questionnaire. Results: A total of 108 stroke survivors and 45 caregivers participated in this study. The average age of the stroke survivors was 54 years (standard deviation = 12.73 and 58% (n = 62 had moderate to full community reintegration. They were happy with physiotherapy services but not with parking availability and cost of services. The QOL was poor with the lowest scores for energy and highest scores for vision and language domains. Twenty five (55% caregivers were strained. A positive correlation was found between community reintegration and satisfaction with services (r = 0.27, p < 0.0001 and QOL (r = 0.51, p < 0.0001. A negative correlation was found between community reintegration and caregiver strain (r = -0.37, p < 0.0001. Conclusion: Most stroke survivors are reintegrated into their communities except in the areas of work and education and have poor QOL and most of their caregivers are strained; however, they are satisfied with physiotherapy services.

  13. Life Course Stage and Social Support Mobilization for End-of-Life Caregivers.

    Science.gov (United States)

    LaValley, Susan A; Gage-Bouchard, Elizabeth A

    2018-04-01

    Caregivers of terminally ill patients are at risk for anxiety, depression, and social isolation. Social support from friends, family members, neighbors, and health care professionals can potentially prevent or mitigate caregiver strain. While previous research documents the importance of social support in helping end-of-life caregivers cope with caregiving demands, little is known about differences in social support experiences among caregivers at different life course stages. Using life course theory, this study analyzes data from in-depth interviews with 50 caregivers of patients enrolled in hospice services to compare barriers to mobilizing social support among caregivers at two life course stages: midlife caregivers caring for parents and older adult caregivers caring for spouses/partners. Older adult caregivers reported different barriers to mobilizing social support compared with midlife caregivers. Findings enhance the understanding of how caregivers' life course stage affects their barriers to mobilization of social support resources.

  14. Residual Fatigue Properties of Asphalt Pavement after Long-Term Field Service

    Directory of Open Access Journals (Sweden)

    Peide Cui

    2018-05-01

    Full Text Available Asphalt pavement is widely used for expressways due to its advantages of flexibility, low cost, and easy maintenance. However, pavement failures, including cracking, raveling, and potholes, will appear after long-term service. This research evaluated the residual fatigue properties of asphalt pavement after long-term field service. Fatigue behavior of specimens with different pavement failure types, traffic load, service time, and layers were collected and characterized. Results indicate that after long-term field service, surface layer has a longer fatigue life under small stress levels, but shorter fatigue life under large stress levels. Longer service time results in greater sensitivity to loading stress, while heavier traffic results in shorter fatigue life. Surface and underneath layers present very close fatigue trend lines in some areas, indicating that the fatigue behavior of asphalt mixture in surface and underneath layers are aged to the same extent after eight to ten years of field service.

  15. To be truly alive: motivation among prison inmate hospice volunteers and the transformative process of end-of-life peer care service.

    Science.gov (United States)

    Cloyes, Kristin G; Rosenkranz, Susan J; Wold, Dawn; Berry, Patricia H; Supiano, Katherine P

    2014-11-01

    Some US prisons are meeting the growing need for end-of-life care through inmate volunteer programs, yet knowledge of the motivations of inmate caregivers is underdeveloped. This study explored the motivations of inmate hospice volunteers from across Louisiana State (n = 75) through an open-ended survey, a grounded theory approach to analysis, and comparison of responses by experience level and gender. Participants expressed complex motivations; Inter-related themes on personal growth, social responsibility and ethical service to vulnerable peers suggested that inmate caregivers experience an underlying process of personal and social transformation, from hospice as a source of positive self-identity to peer-caregiving as a foundation for community. Better understanding of inmate caregiver motivations and processes will help prisons devise effective and sustainable end of life peer-care programs. © The Author(s) 2013.

  16. High energy density, long life energy storage capacitor dielectric system

    International Nuclear Information System (INIS)

    Nichols, D.H.; Wilson, S.R.

    1977-01-01

    The evolution of energy storage dielectric systems shows a dramatic improvement in life and joule density, culminating in a 50% to 300% life improvement of polypropylene film-paper-phthalate ester over paper-castor oil depending on service. The physical and electrical drawbacks of castor oil are not present in the new system, allowing the capacitor designer to utilize the superior insulation resistance, dielectric strength, and corona resistance to full advantage. The result is longer life for equal joule density or greater joule density for equal life. Field service proof of the film-Geconol system superiority is based on 5 megajoule in operation and 16 megajoule on order

  17. Burnout among physiotherapists and length of service

    Directory of Open Access Journals (Sweden)

    Zbigniew Śliwiński

    2014-04-01

    Full Text Available Objectives: The aim of this study was to identify factors that contribute to the development of burnout among physiotherapists with different length of service in physiotherapy. Material and Methods: The following research tools were used to study burnout: the Life Satisfaction Questionnaire (LSQ, based on FLZ (Fragebogen zur Lebenszufriedenheit by Frahrenberg, Myrtek, Schumacher, and Brähler; the Burnout Scale Inventory (BSI by Steuden and Okła; and an ad hoc questionnaire to collect socio-demographic data. The survey was anonymous and voluntary and involved a group of 200 active physiotherapists working in Poland. Results: A statistical analysis revealed significant differences in overall life satisfaction between length-of-service groups (p = 0.03. Physiotherapists with more than 15 years of service reported greater satisfaction than those with less than 5 years and between 5 and 15 years of service. The results suggest that burnout in those with 5-15 years of service is higher in physiotherapists working in health care centers and increases with age and greater financial satisfaction, while it decreases with greater satisfaction with friend and family relations and greater satisfaction with one's work and profession. In those with more than 15 years of service, burnout increases in the case of working in a setting other than a health care or educational center and decreases with greater satisfaction with one's work and profession. Conclusions: Job satisfaction and a satisfying family life prevent burnout among physiotherapists with 5-15 years of service in the profession. Financial satisfaction, age and being employed in health care may cause burnout among physiotherapists with 5-15 years of service. Physiotherapists with more than 15 years of service experience more burnout if they work in a setting other than a health care or educational center and less burnout if they are satisfied with their profession.

  18. Strengthening rehabilitation services in Indonesia: A brief situation analysis.

    Science.gov (United States)

    Nugraha, Boya; Setyono, Garry Rahardian; Defi, Irma Ruslina; Gutenbrunner, Christoph

    2018-04-18

    People with disability (PWD) in Indonesia are often neglected by society. Improving their life situation towards full participation in society is crucial. As a health strategy, rehabilitation can improve func-tioning, quality of life and participation in society. However, rehabilitation services in Indonesia need improvement. Making a situation analysis of rehabilitation services and their provision in the country is a pre-requisite to taking any action towards improvement. This paper compiles available data related to disability and rehabilitation services in Indonesia, using the Rehabilitation Services Assessment Tool (RSAT) as a framework. Gaps in provision were analysed, resulting in the compilation of a list of generic recommendations to improve rehabilitation services in the country. Indonesia faces many challenges in rehabilitation services, including the health workforce and the provision of services. This situation analysis and list of generic recommendations may be used in further discussions with relevant stakeholders in the country to develop a national strategy to strengthen rehabilitation services.

  19. Experimental assessment of ecosystem services in agriculture

    DEFF Research Database (Denmark)

    Sandhu, Harpinder; Porter, John Roy; Wratten, Steve

    2013-01-01

    Ecosystem services are the resources and processes supplied by natural ecosystems which benefit humankind (for example, pollination of crops by insects, or water filtration by wetlands). They underpin life on earth, provide major inputs to many economic sectors and support our lifestyles. Agricul......Ecosystem services are the resources and processes supplied by natural ecosystems which benefit humankind (for example, pollination of crops by insects, or water filtration by wetlands). They underpin life on earth, provide major inputs to many economic sectors and support our lifestyles....... Agricultural and urban areas are by far the largest users of ecosystems and their services and (for the first time) this book explores the role that ecosystem services play in these managed environments. The book also explores methods of evaluating ecosystem services, and discusses how these services can...... be maintained and enhanced in our farmlands and cities. This book will be useful to students and researchers from a variety of fields, including applied ecology, environmental economics, agriculture and forestry, and also to local and regional planners and policy makers....

  20. Total Product Life Cycle (TPLC)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Total Product Life Cycle (TPLC) database integrates premarket and postmarket data about medical devices. It includes information pulled from CDRH databases...

  1. Can comprehensive specialised end-of-life care be provided at home? Lessons from a study of an innovative consultant-led community service in the UK.

    Science.gov (United States)

    Noble, B; King, N; Woolmore, A; Hughes, P; Winslow, M; Melvin, J; Brooks, J; Bravington, A; Ingleton, C; Bath, P A

    2015-03-01

    The Midhurst Macmillan Specialist Palliative Care Service (MMSPCS) is a UK, medical consultant-led, multidisciplinary team aiming to provide round-the-clock advice and care, including specialist interventions, in the home, community hospitals and care homes. Of 389 referrals in 2010/11, about 85% were for cancer, from a population of about 155 000. Using a mixed method approach, the evaluation comprised: a retrospective analysis of secondary-care use in the last year of life; financial evaluation of the MMSPCS using an Activity Based Costing approach; qualitative interviews with patients, carers, health and social care staff and MMSPCS staff and volunteers; a postal survey of General Practices; and a postal survey of bereaved caregivers using the MMSPCS. The mean cost is about 3000 GBP (3461 EUR) per patient with mean cost of interventions for cancer patients in the last year of life 1900 GBP (2192 EUR). Post-referral, overall costs to the system are similar for MMSPCS and hospice-led models; however, earlier referral avoided around 20% of total costs in the last year of life. Patients and carers reported positive experiences of support, linked to the flexible way the service worked. Seventy-one per cent of patients died at home. This model may have application elsewhere. © 2014 The Authors. European Journal of Cancer Care published by John Wiley & Sons Ltd.

  2. [Implementation of ethics services. Opportunities and obstacles].

    Science.gov (United States)

    Salomon, F

    2015-04-01

    Medical success in the last century has caused situations, in which the question arises whether therapy is right. In the same time autonomy has become more and more important. Furthermore, human beings want to decide on health, life and dying. Experience of limitations of life and desire of autonomy in healthcare lead to ethical questions. Different ethical services were established to deal with and to solve problems. Ethics committees with multiprofessional members and different qualifications will give guidance in critical decision making. Ethics services do not receive responsibility for the decision, but helps those who are responsible by structured reflection, estimation of values and including all concerned. Implementing ethics services also encounters obstructions and scepticism. Time, responsibility for therapy and criticism of customs and structures must be considered to perpetuate success. Instructions for implementing ethics services are presented.

  3. Telling Modernization: Three Voices. Life History, Gender and the Discourse of Modernization. Roskilde University Life History Project Paper.

    Science.gov (United States)

    Anderson, Linda

    The relationship between life history, gender, and the discourse of modernization was examined from the perspective of a researcher with extensive experience performing evaluations about modernization within human services in Denmark. Three stories about site-based management in two human service institutionsa youth center and a boarding school…

  4. Examination of Life Satisfaction, Child Maltreatment Potential and Substance Use in Mothers Referred for Treatment by Child Protective Services for Child Neglect and Substance Abuse: Implications for Intervention Planning

    OpenAIRE

    Plant, Christopher P.; Donohue, Brad; Holland, Jason M.

    2015-01-01

    There is evidence to suggest mothers who are served by child protective service agencies are relatively dissatisfied in their lives, leading some investigators to conclude life dissatisfaction may be associated with child maltreatment. To assist in better understanding this relationship the Life Satisfaction Scale for Caregivers (LSSC) was psychometrically developed in a sample of 72 mothers who were referred for behavioral treatment for child neglect and substance abuse by caseworkers from a...

  5. [Suicide among the French National Police forces: Implication of life events and life trajectories].

    Science.gov (United States)

    Encrenaz, G; Miras, A; Contrand, B; Séguin, M; Moulki, M; Queinec, R; René, J-S; Fériot, A; Mougin, M; Bonfils, M; Marien, P; Michel, G; Lagarde, E

    2016-08-01

    Research indicates that suicide rates are high among members of law enforcement. Our objectives were: (1) to determine life events implicated in suicide mortality among French law enforcement; and (2) to describe the different life trajectories of police officers who deceased by suicide. All suicides of police officers which occurred during 2008 (n=49) were explored using the psychological autopsy method. Key informants were: a supervisor, a colleague and a member of the family or a close friend. Each of them were interviewed by trained psychologists using standardized questionnaires exploring: sociodemographic characteristics, life events, social integration and support, health service use, mental health with the Composite International Diagnostic Interview short form (CIDI-SF), occupational stress with the Spielberger Inventory, impulsiveness with the Barratt Impulsiveness Scale and aggressiveness with the Brown-Goodwin Lifetime Aggression Scale. Information was then summarized in a timetable life trajectory of all life areas. All cases were finally appraised by at least two experts in order to identify the determinants of the suicide and to determine psychiatric diagnoses. For each period of time, a burdensomeness score was determined, from 6 (no adversity) to 1 (adversities in each sphere of life). Of the 49 cases of suicide, two were excluded and 39 were investigated and appraised (response rate: 39/47=83%). Eighty-two percent of the suicide cases were men and the mean age at death was 35years. In more than half of the cases, police officers used their service weapon to commit suicide. All deceased police officers were suffering from mental health symptoms (primarily depression). Of them, two thirds had used healthcare for this distress. The main other cause of suicide was problems in the married life (70% of the cases). Four distinct types of life trajectories of adversities could be identified by a qualitative analysis. It is the first time such a study was

  6. Maintenance, rehabilitation, long life-the CANDU potential

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Charlebois, P.; Hopkins, J.

    1998-01-01

    Plant life extension beyond the original design life is becoming an attractive economic consideration in the nuclear industry. Plant Life Management and life extension considerations have been built into the complete life cycle of the CANDU plant. The plant life management studies demonstrate that life extension for operating plants beyond 30 years is economically viable. The new CANDU designs benefit from this experience feedback and as a result, the plant design basis is now 40 years or better with potential for economical life extension. AECL is therefore confident that the new CANDU designs will exceed the performance record of the first generation CANDU 6 units and is committed to providing continued support and services during the operating life of the plant

  7. Degradation of gas turbine coatings and life assessment

    Energy Technology Data Exchange (ETDEWEB)

    Cheruvu, N S [Southwest Research Institute, San Antonio, TX (United States)

    1999-12-31

    MCrAlY coatings are widely used on hot section components of gas turbines to provide hot corrosion and/or oxidation protection by formation of an oxide layer on the surface. As the protective oxide scale exfoliates during service, aluminum from the coating diffuses outward for reformation of the protective scale. Aluminum may also diffuse inward due to the differences in composition between the coating and the substrate. Thus, the coatings degrade due to oxidation, oxide scale spallation, and inward and outward diffusion of aluminum. Service life of these coatings is controlled by the aluminum content in the coating, operating temperature and start- shutdown cycles. In-service degradation of CoCrAlY and CoNiCrAlY coatings is presented. A procedure to predict the remaining service life of coatings under oxidizing conditions is discussed. (orig.) 12 refs.

  8. Degradation of gas turbine coatings and life assessment

    Energy Technology Data Exchange (ETDEWEB)

    Cheruvu, N.S. [Southwest Research Institute, San Antonio, TX (United States)

    1998-12-31

    MCrAlY coatings are widely used on hot section components of gas turbines to provide hot corrosion and/or oxidation protection by formation of an oxide layer on the surface. As the protective oxide scale exfoliates during service, aluminum from the coating diffuses outward for reformation of the protective scale. Aluminum may also diffuse inward due to the differences in composition between the coating and the substrate. Thus, the coatings degrade due to oxidation, oxide scale spallation, and inward and outward diffusion of aluminum. Service life of these coatings is controlled by the aluminum content in the coating, operating temperature and start- shutdown cycles. In-service degradation of CoCrAlY and CoNiCrAlY coatings is presented. A procedure to predict the remaining service life of coatings under oxidizing conditions is discussed. (orig.) 12 refs.

  9. Public health approaches to end-of-life care in the UK: an online survey of palliative care services.

    Science.gov (United States)

    Paul, Sally; Sallnow, Libby

    2013-06-01

    The public health approach to end-of-life care has gained recognition over the past decade regarding its contribution to palliative care services. Terms, such as health-promoting palliative care, and compassionate communities, have entered the discourse of palliative care and practice; examples exist in the UK and globally. This scoping study aimed to determine if such initiatives were priorities for hospices in the UK and, if so, provide baseline data on the types of initiatives undertaken. An online survey was designed, piloted and emailed to 220 palliative care providers across the four UK countries. It included a total of six questions. Quantitative data were analysed using descriptive statistics. Qualitative data were analysed thematically. There was a 66% response rate. Of those providers, 60% indicated that public health approaches to death, dying and loss were a current priority for their organisation. Respondents identified a range of work being undertaken currently in this area. The most successful were felt to be working with schools and working directly with local community groups. The findings demonstrate the relevance of a public health approach for palliative care services and how they are currently engaging with the communities they serve. Although the approach was endorsed by the majority of respondents, various challenges were highlighted. These related to the need to balance this against service provision, and the need for more training and resources to support these initiatives, at both national and community levels.

  10. Facility Focus: Food Service.

    Science.gov (United States)

    College Planning & Management, 2002

    2002-01-01

    Describes the Hawthorn Court Community Center at Iowa State University, Ames, and the HUB-Robeson Center at Pennsylvania State University. Focuses on the food service offered in these new student-life buildings. Includes photographs. (EV)

  11. Creating a Liveable City - Eco-services, Systems and Place

    Science.gov (United States)

    Hamilton, R. J.; Dean, M.; Birtles, P. J.; Hore, J.; Dahlenburg, J.

    2014-12-01

    The use of an ecosystem service framework for natural resource management has gained increasing traction in the public sector. This is of especial interest in cities as residual ecosystems - typically located along creeks and estuaries, or remaining in scattered pockets throughout the urban area - offer some of the highest value social and economic returns per capita for the land area they occupy, yet are often impractical to manage from more traditional approaches to conservation. We posit that the well-being of humans and other species is the outcome of healthy, functioning ecosystems, and that, from a policy perspective, it is essential to consider services in this context. We arrange ecosystem services into three categories: life-enabling, life-sustaining and life-fulfilling, in a modification to the categories of the Millennium Ecosystem Assessment, and identify additional eco-services unique to urban areas. At local scale, these contribute to the well-being of city residents and positively affect quality of life, forming essential elements of urban liveability. However, dynamics of co-located built and natural environments challenge the capacity of ecosystems to function and provide their full suite of services. Using Sydney as an example, we outline a modular framework of socio-ecological systems and places to show how eco-services supporting liveability can be considered in conceptual and physical space. At a policy level, framing systems-based management objectives that protect, improve and re-discover desirable ecosystem services within the city (as opposed to further increasing the environmental footprint outside), will allow for unique, positive, socially-enabling outcomes for urban centres, in Australia, and globally.

  12. Plant life management of the ACR-1000 Concrete containment structure

    International Nuclear Information System (INIS)

    Abrishami, H.H.; Ricciuti, R.; Elgohary, M.

    2009-01-01

    The Ageing of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. For a new plant, a Plant Life Management (PLiM) program should start in the design process and then continues through the plant operation and decommissioning. Hence, PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of the ACR-10001 (Advanced CANDU Reactor) designed by AECL. The ACR-1000 is designed for a 100-year plant life including 60-year operating life and an additional 40-year decommissioning period. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) ageing management program. During the design phase, in addition to strength and serviceability, durability, throughout the service life and decommissioning phase of the ACR-1000 structure, is a major consideration. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental conditions. In addition to addressing the design methodology and material performance requirements, a systematic approach for the ageing management program for the concrete containment structure is presented. (authors)

  13. Assessment of the Residual Life of Steam Pipeline Material beyond the Computational Working Time

    Directory of Open Access Journals (Sweden)

    Marek Sroka

    2017-03-01

    Full Text Available This paper presents the evaluation of durability for the material of repair welded joints made from (13HMF 14MoV6-3 steel after long-term service, and from material in the as-received condition and after long-term service. Microstructure examinations using a scanning electron microscope, hardness measurements and creep tests of the basic material and welded joints of these steels were carried out. These tests enabled the time of further safe service of the examined repair welded joints to be determined in relation to the residual life of the materials. The evaluation of residual life and disposable life, and thus the estimation and determination of the time of safe service, is of great importance for the operation of components beyond the design service life. The obtained test results are part of the materials’ characteristics developed by the Institute for Ferrous Metallurgy for steels and welded joints made from these steels to work under creep conditions.

  14. Evaluation of operating experience for service life of components

    International Nuclear Information System (INIS)

    Schulz, H.; Sunder, R.

    1987-01-01

    The evaluation of the operating experience of German light-water reactor components based on licensee event reports indicates that a large part of the defects and failures are caused by fatigue and/or corrosion type mechanisms. Actions have been taken to eliminate the causes by redesigning systems, replacement of components and change of operating procedures. The interaction of fatigue and corrosion mechanisms are not understood in all details today, further research is still necessary. To establish a more realistic data base of the local loading and water chemistry condition for all loading conditions the application of advanced monitoring systems is proposed. The benefits of these systems are that the operating procedures can be further optimized, the actual used life time fraction can be calculated regularly and the data base can be used for life time extension. (orig.) [de

  15. Estimating the Service Lives of Building Products in Use

    NARCIS (Netherlands)

    Straub, A.

    2015-01-01

    Reliable service life data of building products are of great importance when completing environmental LCA (life cycle assessment) reviews, for LCC (life cycle costing) and for maintenance planning tasks. A research project was set up to answer the following research questions: (1) what are reliable

  16. End-of-Life Care and Discussions in Japanese Geriatric Health Service Facilities: A Nationwide Survey of Managing Directors' Viewpoints.

    Science.gov (United States)

    Kanoh, Asako; Kizawa, Yoshiyuki; Tsuneto, Satoru; Yokoya, Shoji

    2018-01-01

    Geriatric health service facilities (GHSFs) play important roles as intermediate care facilities for elderly individuals temporarily when they need rehabilitation before returning home. However, the number of residents spending their end-of-life (EOL) period in such facilities is increasing. To improve the quality of EOL care, end-of-life discussions (EOLDs) are recommended by some guidelines and studies. This study aimed to clarify the current practice of EOL care and EOLDs in GHSFs in Japan. We conducted a nationwide cross-sectional survey by mailing questionnaires about EOL care and EOLDs to 3437 GHSF managing directors. The questionnaire was developed through a literature review and discussion among the researchers and experts. Descriptive statistics summarized the data. We also analyzed the factors related to GHSFs conducting EOLDs using Fisher exact tests. The response rate was 20.7% (713 of 3437). Among the respondents, 75.2% (536 of 713) of GHSFs provided EOL care and 73.1% (521 of 713) conducted EOLDs. The most common reasons for difficulties in providing EOL care included the lack of EOL education for nurses and care workers, and their fear about caring for dying residents. End-of-life discussions were mostly initiated after the deterioration of a resident's condition and were conducted with families by physicians. Statistically significant factors of GHSFs conducting EOLDs included providing EOL education for nurses and care workers, availability of private room for critically ill residents, emergency on-call doctors, and EOL care. Adequate practical staff education programs for EOL care including EOLDs may be crucial for quality of end-of-life care in aged care facilities.

  17. Prediction of fatigue life under service loading using the relative method

    International Nuclear Information System (INIS)

    Buch, A.

    1982-01-01

    Fatigue life estimates obtained with the local strain approach (LSA) and with the conventional nominal stress approach (NSA) were compared with experimental results obtained on notched AlCuMg2 aircraft material specimens with flight simulation random tensile loading. The effect of change of the reference stress, of the loading program and of some changes in the loading frequency distribution, on the ratio Nsub(exp)/Nsub(pred) was investigated. A material strain-life curve, a cyclic stress-strain curve. The Neuber-Topper rule Ksub(sigma) x Ksub(epsilon) = K 2 = const. and a K value estimated with an exact two-parameter notch factor formula for the case R = 0, N = 10 7 were used for life predictions. (orig./RW) [de

  18. The Antecedents of Customer Loyalty: An Empirical Investigation in Life Insurance Context

    Directory of Open Access Journals (Sweden)

    Srivastava Medha

    2013-06-01

    Full Text Available The present paper seeks to offer the most decipherable and widely applicable antecedents of customer loyalty. It explores the extant literature on customer loyalty and brings out seven variableswhich are responsible for formation of customer loyalty. Further, the relative importance of these variables has been ascertained through Multiple Regression Analysis which revealed that service quality and commitment are the strongest predictors of customer loyalty in theIndian life insurance industry. The paper also attempts to assess the loyalty status of life insurance customers in India and draw a comparison between public and private sector life insurancecompanies in order to provide significant insights to the life insurance companies that may assist them in devising better loyalty practices. The findings suggest that Indian customers do care about the public sector status of a financial service provider as it entails a sense of security and stability and thus creates a difference between customer loyalty of public sector life insurerand that of private sector life insurer. The paper holds significant implications for academicians interested in dynamics of customer loyalty as well as the marketers of life insurance services whoare concerned with customer relationships.

  19. Developing the Social Life Cycle Assessment

    DEFF Research Database (Denmark)

    Jørgensen, Andreas

    social audits. Through an interview with a social auditor it is suggested that the auditor varies the procedures for carrying out the audit in order to get the most valid result. For example, the auditor has to take into account the various tricks a company in a given context normally uses to cheat......This thesis seeks to add to the development of the Social Life Cycle Assessment (SLCA), which can be defined as an assessment method for assessing the social impacts connected to the life cycle of a product, service or system. In such development it is important to realise that the SLCA is only...... appealing to the extent that it does what it is supposed to do. In this thesis, this goal of SLCA is defined as to support improvements of the social conditions for the stakeholders throughout the life cycle of the assessed product, system or service. This effect should arise through decision makers...

  20. Strategy for 100-year life of the ACR-1000 concrete containment structure

    International Nuclear Information System (INIS)

    Abrishami, H.; Elgohary, M.

    2006-01-01

    The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of the ACR-1000 (Advanced CANDU Reactor) designed by AECL. The ACR-1000 is designed for 100-year plant life including 60-year operating life and additional 40-year decommissioning period of time. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) life cycle management and ageing management program. In the design phase, in addition to strength and serviceability, durability is a major requirement during the service life and decommissioning phase of the ACR structure. Parameters affecting durability design include: a) concrete performance, b) structural application, and c) environmental conditions. Due to the complex nature of the environmental effects acting on structures during the service life of project, it is considered that true improved performance during the service life can be achieved by improving the material characteristics. Many recent innovations in advanced concrete materials technology have made it possible to produce modern concrete such as high-performance concrete with exceptional performance characteristics. In this paper, the PLiM strategy for the ACR-1000 concrete containment is presented. In addition to addressing the design methodology and material performance areas, a systematic approach for ageing management program for the concrete containment structure is presented. (author)

  1. The Relationship Between Psychological Resilience and Life Satisfaction of University Academic Staff

    Directory of Open Access Journals (Sweden)

    Gamze ÜLKER TÜMLÜ

    2013-12-01

    Full Text Available The aim of this study is to examine the relationship between academic staff psychological resilience and life satisfaction. The research is a descriptive study in relational survey model. The study group includes 94 faculty members chosen randomly in 2011-2012 academic years in Kastamonu University. As a data collection instruments, life satisfaction scale developed by Diener et al in 1985, adapted to Turkish by Köker in 1991 and Connor and Davidson Resilience Scale/CD-RISC developed by Connor and Davidson in 2003, adapted to Turkish by Karaırmak in 2010, were used. In the study correlation method was used in order to determine the relationship between resilience and life satisfaction, regression analysis was used in order to determine whether the resilience predict life satisfaction. In addition, Mann-Whitney U and Kruskal-Wallis H tests were used in the analysis of resilience in terms of age, gender, marital status, degree, years of service and years of service at the university in the study. When the outcomes were evaluated, a significant, positive relationship was found between life satisfaction and resilience. The psychological resilience predicts life satisfaction in a meaningful way and resilience explains 7% of the total variance about life satisfaction. In addition, resilience levels of the university academic staff does not differ meaningfully from the gender, age, marital status, degree, years of service and years of service at university.

  2. FUEL SERVICES: Customer focused on Product Support during the whole Life Time

    Energy Technology Data Exchange (ETDEWEB)

    Langenberger, J.; Hummel, W.

    2015-07-01

    For more than 40 years, Fuel Services of AREVA has been delivering devices and providing on-site services primary at LWR worldwide. We support our worldwide customers in achieving safe and economic operation of the fuel assemblies (FA) and core components (CC) and have received excellent feedback from them. But the Fuel Services support goes beyond on-site activities. (Author)

  3. 41 CFR 60-300.25 - Health insurance, life insurance and other benefit plans.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Health insurance, life... VETERANS, AND ARMED FORCES SERVICE MEDAL VETERANS Discrimination Prohibited § 60-300.25 Health insurance, life insurance and other benefit plans. (a) An insurer, hospital, or medical service company, health...

  4. Enabling engineering support for integrated product and service innovation

    OpenAIRE

    Thor, Peter

    2011-01-01

    The increasing need for mobility in society alongside an intensifying concern for sustainability challenges today’s aviation industry. For companies, a Product-Service Systems (PSS) perspective puts emphasis on proving value to customers by offering a combination of hardware and services over an extended life cycle. While opening up the room for innovation, development from an extended life cycle perspective can seem daunting for companies currently focusing on development and sale of physica...

  5. APPROACHES TO QUALITY OF LIFE ANALYSISQUANTICATION

    Directory of Open Access Journals (Sweden)

    Larisa E. Danilina

    2015-01-01

    Full Text Available The paper reviews different approaches to quality of life measurement used in Russian and international statistics. It outlines the essence of J. Stiglitz’s recommendations on development of quality of life statistical indicators, analyses proposals and practical application of innovative approaches of quality of life measurement by the French National Institute for Statistics and Economic Studies (INSEE. The paper reviews Rosstat’s (Russian Federal State Statistics Service new research as well as an independent research in the area of quality of life research. The authors make proposals to extend the list of aspects analyzed an quality of life research and underline the importance of such a review through regional specifics. They suggest extending the system of quality of life statistical indicators by certain coefficients characterizing economic development disparity and its influence on the quality of life.

  6. 77 FR 35353 - Biotech Life Sciences Trade Mission to Australia

    Science.gov (United States)

    2012-06-13

    ... DEPARTMENT OF COMMERCE International Trade Administration Biotech Life Sciences Trade Mission to... Commercial Service (CS) is organizing a Biotech Life Sciences trade mission to Australia, October 29-November.... biotechnology and life science firms. The goals of the trade mission to Australia are to (1) increase U.S...

  7. 76 FR 17621 - Biotech Life Science Trade Mission to China

    Science.gov (United States)

    2011-03-30

    ... DEPARTMENT OF COMMERCE International Trade Administration Biotech Life Science Trade Mission to... Commercial Service (CS) is organizing a Biotechnology Life Sciences trade mission to China on October 17-20... representatives from a variety of U.S. biotechnology and life science firms and trade organizations. The mission...

  8. Den præhospitale service i Danmark

    DEFF Research Database (Denmark)

    Trier, H; Larsen, C F

    1993-01-01

    In Denmark, emergency ambulances are dispatched by 41 centres manned either by trained firemen (in Copenhagen) or policemen (outside Copenhagen). In 1990, emergency ambulance calls totalled 284,000. Utilisation of emergency ambulance services increases with urbanisation. A doctor-manned ambulance...... is in operation in Copenhagen, and in some other large towns anaesthesiology and intensive care teams can be dispatched from hospital to give on-the-spot care. In less populated areas, some general practitioners give advanced life-support. Although many areas are serviced by ambulances equipped...... with defibrillators, the majority of patients receive only basic life-support from ambulance personnel. New initiatives resulting from a recent report by a commission appointed by central authorities, and focused on prehospital treatment, are expected to improve the service by raising the level of training given...

  9. Russian normative approach to the question of management of NPP life time

    International Nuclear Information System (INIS)

    Karpunin, N.I.

    2002-01-01

    Full text: In Russia, the designated service life of a nuclear power plant (NPP) is 30 years. During the period 2001-2010, 15 Russian NPP units will reach the end of their service life. The 'Basic Provisions of NPP Safety Assurance', OPB-88/97, Item 5.1.14, provide for a possible extension of NPP operation beyond the designated service life. For such an extension, the NPP operating organization must apply for a license renewal to Gosatomnadzor, which needs to specify the relevant requirements. GAN is developing regulatory documents to provide a basis for NPP license renewal/extension of NPP operation, which would benefit from international experience. In accordance with 'The program of Atomic Energy Development in the Russian Federation for 1998-2005 and up to 2010' adopted by Decree No. 815 of the Government of the Russian Federation on 21 July 1998, priority is placed on the preparation of NPPs for extension of service life and on ensuring safety in the extended operating period. The length of the extension beyond the designated service life is to be determined on the basis of a range of technical and economic considerations, including: The ability to ensure and maintain operational safety; Sufficient residual service life of the unit's non-repairable components; The availability of temporary storage facilities for the additional spent nuclear fuel and radioactive waste, or the possibility of its transport off-site; The ability to ensure safe handling of the radioactive waste generated during the extension period; To extend the lifetime of an NPP unit, the plant Operator is required to perform the following tasks: Carry out a comprehensive survey of the NPP unit; Draw up a programme of preparation for lifetime extension; Prepare the NPP unit for operation in the extended period; Carry out the necessary tests. There are also some normative documents, which regulate management of NPP life time. (author)

  10. 47 CFR 25.283 - End-of-life disposal.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false End-of-life disposal. 25.283 Section 25.283 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS... satellite orbit under this part shall be relocated, at the end of its useful life, barring catastrophic...

  11. A Literature Review on Quality Teacher’s Working Life

    OpenAIRE

    Ishak Siti Intan Diyana; Abd Razak Nordin; Hussin H.; Fhiri @ Daud Nur Suriaty; Ishak Aida Shakila

    2018-01-01

    Quality of work life is becoming an imperative issue to achieve the goals of the organization in every sector whether it is education, tourism, service sector, manufacturing, banking sector and other. Quality of work life it about work environment, reward, organizational commitment, recognition, participative management, work life balance, welfare facilities, proper grievances handling, job satisfaction and other. High quality of work life can give a result in better organizational performanc...

  12. Availability, Use and Contribution of Support Services to Students ...

    African Journals Online (AJOL)

    Availability, Use and Contribution of Support Services to Students Academic and Social Development in Nigerian University System. ... support services contribute meaningfully to the academic activities and social life. It was therefore ...

  13. Caregiver Life Satisfaction: Relationship to Youth Symptom Severity through Treatment

    Science.gov (United States)

    Athay, M. Michele

    2012-01-01

    This study utilized the Satisfaction with Life Scale to investigate the life satisfaction of caregivers for youth receiving mental health services (N = 383). Specifically, this study assessed how caregiver life satisfaction relates to youth symptom severity throughout treatment. Hierarchical linear modeling with a time-varying covariate was used…

  14. A Classification of Landscape Services to Support Local Landscape Planning

    Directory of Open Access Journals (Sweden)

    María Vallés-Planells

    2014-03-01

    Full Text Available The ecosystem services approach has been proven successful to measure the contributions of nature and greenery to human well-being. Ecosystems have an effect on quality of life, but landscapes also, as a broader concept, may contribute to people's well-being. The concept of landscape services, compared to ecosystem services, involves the social dimension of landscape and the spatial pattern resulting from both natural and human processes in the provision of benefits for human-well being. Our aim is to develop a classification for landscape services. The proposed typology of services is built on the Common International Classification of Ecosystem Services (CICES and on a critical review of existing literature on human well-being dimensions, existing ecosystem service classifications, and landscape perception. Three themes of landscape services are defined, each divided into several groups: provisioning, regulation and maintenance, cultural and social life fulfillment, with the latter focusing on health, enjoyment, and personal and social fulfillment. A special emphasis is made on cultural services, which are especially important when applied to landscape and which have received less attention.

  15. Inner and Outer Life at Work. The Roots and Horizon of Psychoanalytically Informed Work Life Research

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda

    2013-01-01

    identities, conflicts, organisational and societal structuration. Against this background the accounts and conceptualisations of work life involving people to people interactions offered by psychodynamic theories and methods take up a pivotal position. Psychoanalytic organisational and work life research...... of personalised competences and work investments in welfare services, the transformation from subject-object relationships to subject-subject relationships and the emergence of the "learning organisations" and reflexive leadership. All of this has been the subject of critical analyses tracing modern work life...... position and German psychoanalytic social psychology in order to situate and identify how to understand the inner and outer life at work – in a generic display of concepts, methods and epistemology....

  16. 47 CFR 74.23 - Interference jeopardizing safety of life or protection of property.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Interference jeopardizing safety of life or... SERVICES General; Rules Applicable to All Services in Part 74 § 74.23 Interference jeopardizing safety of life or protection of property. (a) The licensee of any station authorized under this part that causes...

  17. Challenges in the Licensing of New Nuclear Power Plant, Service Life Extension of Operating Ones (Safeguards-Safety-Security Aspects)

    International Nuclear Information System (INIS)

    Horvath, K.

    2016-01-01

    The Hungarian Atomic Energy Authority (HAEA), as the Hungarian nuclear regulator is faced with dual challenges meant by the licensing of the planned construction of two AES-2006 type nuclear power plant units and the licensing of the service life extension of the existing units that have been operating for more than 30 years. The HAEA has full regulatory competence; its mission is to oversee the safety and security of all the peaceful applications of atomic energy. Accordingly, the licensing scope covers safeguards, safety as well as security. The paper shows the current status of the Hungarian nuclear programme and the future plans, as well as summarizes the regulatory approach followed by HAEA. (author)

  18. Extension of life of nuclear power stations

    International Nuclear Information System (INIS)

    Takahashi, Hideaki

    1991-01-01

    At the time of designing nuclear power stations, as their service life, generally 40 years are taken, and the basic design specifications of machinery and equipment are determined. In USA where atomic energy has been developed, the new construction of nuclear power stations is cased for a while, however, if this situation continues as it is, since old power stations reach the service life of 40 years and are retired in near future, it is feared that the circumstance of the total amount of power generation becoming short will occur. As one of the countermeasures to this, the research on the extension of life of nuclear power stations has been carried out in many fields in USA, and it is expected that the application for extending the life for the power stations constructed in the initial period of development is submitted in 1991. The researches that have been carried out for solving the technical problems in this extension of life and the situation in Japan are reported. The NEC of USA decided that the operation period of nuclear power stations in USA, which is considered to be 40 years so far, can be extended up to the limit of 20 years. The background and circumstances of this problem in USA, Nuclear Plant Aging Research Program, Plant Life Extension Program and so on are reported. (K.I.)

  19. Internet Service Cognition and Use, and Their Promotion of Quality of Life in Taiwan

    Science.gov (United States)

    Liang, Te-Hsin

    2011-01-01

    The "e-Taiwan Program" implemented by Taiwan government is aimed at showing the e-advantage in people's life and bring about essential benefits. This research follows the e-Life indicators of the Quality of Life measurement system developed by "e-Taiwan Program", which including four major dimensions of e-Daily Life,…

  20. The Life-Cycle Policy model

    NARCIS (Netherlands)

    Anciaux, N.L.G.; Bouganim, Luc; van Heerde, H.J.W.; Pucheral, Philippe; Apers, Peter M.G.

    Our daily life activity leaves digital trails in an increasing number of databases (commercial web sites, internet service providers, search engines, location tracking systems, etc). Personal digital trails are commonly exposed to accidental disclosures resulting from negligence or piracy and to

  1. Frailty and its impact on health-related quality of life: a cross-sectional study on elder community-dwelling preventive health service users.

    Directory of Open Access Journals (Sweden)

    Yaw-Wen Chang

    Full Text Available BACKGROUND: The purpose of this study was to identify the incidence of frailty and to investigate the relationship between frailty status and health-related quality of life (HRQoL in the community-dwelling elderly population who utilize preventive health services. METHODS: People aged 65 years and older who visited a medical center in Taipei City from March to August in 2011 for an annual routine check-up provided by the National Health Insurance were eligible. A total of 374 eligible elderly adults without cognitive impairment had a mean age of 74.6±6.3 years. Frailty status was determined according to the Fried frailty criteria. HRQoL was measured with Short Form-36 (SF-36. Multiple regression analyses examined the relationship between frailty status and the two summary scales of SF-36. Models were adjusted for the participants' sociodemographic and health status. RESULTS: After adjusting for sociodemographic and health-related covariables, frailty was found to be more significantly associated (p<0.001 with lower scores on both physical and mental health-related quality of life summary scales compared with robustness. For the frailty phenotypes, slowness represented the major contributing factor in the physical component scale of SF-36, and exhaustion was the primary contributing factor in the mental component scale. CONCLUSION: The status of frailty is closely associated with HRQoL in elderly Taiwanese preventive health service users. The impacts of frailty phenotypes on physical and mental aspects of HRQoL differ.

  2. Combination of Extracorporeal Life Support and Mesenchymal Stem Cell Therapy for Treatment of ARDS in Combat Casualties and Evacuation of Service Members with ARDS

    Science.gov (United States)

    2017-10-01

    AWARD NUMBER: W81XWH-15-2-0072 TITLE: Combination of Extracorporeal Life Support and Mesenchymal Stem Cell Therapy for Treatment of ARDS in...Mesenchymal Stem Cell Therapy for Treatment of ARDS in Combat Casualties and Evacuation of Service Members with ARDS 5b. GRANT NUMBER W81XWH-15...Figure 4. Mitochondrial activity is mostly preserved on the animals that were supported with ventilator devices and mesenchymal stem cells . Using a

  3. Age Weights for Health Services Derived from the Relative Social Willingness-to-Pay Instrument.

    Science.gov (United States)

    Richardson, Jeff; McKie, John; Iezzi, Angelo; Maxwell, Aimee

    2017-04-01

    The effect of a patient's age on the social valuation of health services remains controversial, with empirical results varying in magnitude and implying a different age-value profile. This article employs a new methodology to re-examine these questions. Data were obtained from 2 independent Web-based surveys that administered the Relative Social Willingness to Pay instrument. In the first survey, the age of the patient receiving a life-saving service was varied. Patients were left with either poor mental or physical health. In the second survey, patient age was varied for a service that fully cured the patient's poor mental or physical health. In total, therefore, 4 sets of age weights were obtained: weights for life-extending services with poor physical or mental health outcomes and weights for quality-of-life improvement for patients in poor mental or physical health. Results were consistent. Increasing age was associated in each case with a monotonic decrease in the social valuation of the services. The decrease in value was quantitatively small until age 60 years. By age 80 years, the social value of services had declined by about 50%. The decline commenced at an earlier age in the context of physical health, although the magnitude of the decrement by age 80 years was unrelated to the type of service. With 1 exception, there was little difference in the valuation of services by the age of the survey respondent. Respondents aged >60 years placed a lower, not higher, value on quality-of-life improvement for elderly individuals than other respondents. There was no difference in the valuation of life-extending services.

  4. Evaluating Work-Life Balance in the Department of Defense

    Science.gov (United States)

    2011-04-18

    Evaluating Work - Life Balance in the Department of Defense Erin A. Moeser Defense Equal Opportunity Management Institute (DEOMI) Kizzy M. Parks...for service members’ family lives may increase satisfaction with work - life balance . Examples of family-friendly organizational policies include...1,500 active duty military personnel were surveyed on the value of work / life balance initiates. More specifically, this study assessed respondents

  5. Quality of Life in Europe

    OpenAIRE

    Norina Popovici; Camelia Moraru

    2016-01-01

    Human behavior is based on certain causes related to the satisfaction of the unlimited needsthat we have. Nothing enters into the human consciousness if it is not driven by a particularinterest. Many times we wondered why people want a certain comfort in exchange for sacrifices on longterm: we want houses, cars, holidays, quality services. All our life we work and give up many tothings (maybe) more important than achieving material benefits. It's about quality of life. In thispaper we anal...

  6. SEMANTIC WEB SERVICES – DISCOVERY, SELECTION AND COMPOSITION TECHNIQUES

    OpenAIRE

    Sowmya Kamath S; Ananthanarayana V.S

    2013-01-01

    Web services are already one of the most important resources on the Internet. As an integrated solution for realizing the vision of the Next Generation Web, semantic web services combine semantic web technology with web service technology, envisioning automated life cycle management of web services. This paper discusses the significance and importance of service discovery & selection to business logic, and the requisite current research in the various phases of the semantic web...

  7. Non-destructive testing for plant life assessment

    International Nuclear Information System (INIS)

    2005-01-01

    The International Atomic Energy Agency (IAEA) is promoting industrial applications of nondestructive testing (NDT) technology, which includes radiography testing (RT) and related methods, to assure safety and reliability of operation of industrial facilities and processes. NDT technology is essentially needed for improvement of the quality of industrial products, safe performance of equipment and plants, including safety of metallic and concrete structures and constructions. The IAEA is playing an important role in promoting the NDT use and technology support to Member States, in harmonisation for training and certification of NDT personnel, and in establishing national accreditation and certifying bodies. All these efforts have led to a stage of maturity and self sufficiency in numerous countries especially in the field of training and certification of personnel, and in provision of services to industries. This has had a positive impact on the improvement of the quality of industrial goods and services. NDT methods are primarily used for detection, location and sizing of surface and internal defects (in welds, castings, forging, composite materials, concrete and many more). Various NDT methods are applied for preventive maintenance (aircraft, bridge), for the inspection of raw materials, half-finished and finished products, for in-service-inspection and for plant life assessment studies. NDT is essential for quality control of the facilities and products, and for fitness - for purpose assessment (so-called plant life assessment). NDT evaluates remaining operation life of plant components (processing lines, pipes, vessels) providing an accurate diagnosis that allows predicting extended life operation beyond design life. Status and trends on the NDT for plant life assessment have been discussed in many IAEA meetings related with NDT development, training and education. Experts have largely demonstrated that, using NDT methods, a comprehensive assessment of the life

  8. Classification of ERP System Services

    Directory of Open Access Journals (Sweden)

    Petr Sodomka

    2016-07-01

    Full Text Available Today the ERP business information systems are an essential tool for organization management, regardless of size and field of activity. Their successful implementation and use is conditioned predominantly by IS/ICT knowledge and managerial skills required for directing their life cycle correctly. Defining and correct setting of the service level is a key requirement and skill, usually provided by a service provider based on an implementation and service contract, or an advisory organization, in particular when presale services concerning analyses and tender documentation processing are provided. The following paper discusses the characteristics of the individual service types and the particulars of their practical use. Moreover, it presents the selected significant results of the long-term research performed by the authors in the Center for inVestigations into Information Systems.

  9. Towards Decision Support for a Homecare Services Platform

    NARCIS (Netherlands)

    van 't Klooster, J.W.J.R.; Combes, Catherine; van Beijnum, Bernhard J.F.

    2012-01-01

    It is believed that ICT-mediation for home care services increases patient empowerment, independency, self-efficacy and quality of life. Providing elderly people with tailored care services allows us to learn from patient data to predict future care needs. In this article, we demonstrate the

  10. Effect of decontamination on aging processes and considerations for life extension

    International Nuclear Information System (INIS)

    Diercks, D.R.

    1987-10-01

    The basis for a recently initiated program on the chemical decontamination of nuclear reactor components and the possible impact of decontamination on extended-life service is described. The incentives for extending plant life beyond the present 40-year limit are discussed, and the possible aging degradation processes that may be accentuated in extended-life service are described. Chemical decontamination processes for nuclear plant primary systems are summarized with respect to their corrosive effects on structural alloys, particularly those in the aged condition. Available experience with chemical cleaning processes for the secondary side of PWR steam generators is also briefly considered. Overall, no severe materials corrosion problems have been found that would preclude the use of these chemical processes, but concerns have been raised in several areas, particularly with respect to corrosion-related problems that may develop during extended service

  11. Feasibility of a rural palliative supportive service.

    Science.gov (United States)

    Pesut, B; Hooper, B P; Robinson, C A; Bottorff, J L; Sawatzky, R; Dalhuisen, M

    2015-01-01

    Healthcare models for the delivery of palliative care to rural populations encounter common challenges: service gaps, the cost of the service in relation to the population, sustainability, and difficulty in demonstrating improvements in outcomes. Although it is widely agreed that a community capacity-building approach to rural palliative care is essential, how that approach can be achieved, evaluated and sustained remains in question. The purpose of this community-based research project is to test the feasibility and identify potential outcomes of implementing a rural palliative supportive service (RPaSS) for older adults living with life-limiting chronic illness and their family caregiver in the community. This paper reports on the feasibility aspects of the study. RPaSS is being conducted in two co-located rural communities with populations of approximately 10 000 and no specialized palliative services. Participants living with life-limiting chronic illness and their family caregivers are visited bi-weekly in the home by a nurse coordinator who facilitates symptom management, teaching, referrals, psychosocial and spiritual support, advance care planning, community support for practical tasks, and telephone-based support for individuals who must commute outside of the rural community for care. Mixed-method collection strategies are used to collect data on visit patterns; healthcare utilization; family caregiver needs; and participant needs, functional performance and quality of life. A community-based advisory committee worked with the investigative team over a 1-year period to plan RPaSS, negotiating the best fit between research methods and the needs of the community. Recruitment took longer than anticipated with service capacity being reached at 8 months. Estimated service capacity of one nurse coordinator, based on bi-weekly visits, is 25 participants and their family caregivers. A total of 393 in-person visits and 53 telephone visits were conducted between

  12. Biological Web Service Repositories Review.

    Science.gov (United States)

    Urdidiales-Nieto, David; Navas-Delgado, Ismael; Aldana-Montes, José F

    2017-05-01

    Web services play a key role in bioinformatics enabling the integration of database access and analysis of algorithms. However, Web service repositories do not usually publish information on the changes made to their registered Web services. Dynamism is directly related to the changes in the repositories (services registered or unregistered) and at service level (annotation changes). Thus, users, software clients or workflow based approaches lack enough relevant information to decide when they should review or re-execute a Web service or workflow to get updated or improved results. The dynamism of the repository could be a measure for workflow developers to re-check service availability and annotation changes in the services of interest to them. This paper presents a review on the most well-known Web service repositories in the life sciences including an analysis of their dynamism. Freshness is introduced in this paper, and has been used as the measure for the dynamism of these repositories. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  13. Underlying Motivations of Volunteering Across Life Stages.

    Science.gov (United States)

    Yamashita, Takashi; Keene, Jennifer R; Lu, Chi-Jung; Carr, Dawn C

    2017-03-01

    Volunteering is beneficial not only for individuals' well-being but also for society's well-being; yet only a fraction of U.S. citizens regularly engage in volunteer activities. This study examined how underlying motivations are associated with interest in volunteering for individuals in three major life phases: early, middle, and later adulthood. Data were collected from 1,046 adults who volunteered through nonprofit organizations in Nevada (USA). Exploratory factor analysis revealed that community service, career advancement, and well-being were common underlying motivations for individuals across life stages. However, generativity among the later adulthood group, and social networking among the early and middle adulthood groups were unique motivations for volunteering. Regression analysis showed that the community service motivation was significantly associated with individuals' interest in volunteering among all life stages. Simultaneously, generativity for the later adulthood group, and career advancement for the early adulthood group were unique motivations linked to their actual interest in volunteering.

  14. Determination of Remaining Useful Life of Gas Turbine Blade

    Directory of Open Access Journals (Sweden)

    Meor Said Mior Azman

    2016-01-01

    Full Text Available The aim of this research is to determine the remaining useful life of gas turbine blade, using service-exposed turbine blades. This task is performed using Stress Rupture Test (SRT under accelerated test conditions where the applied stresses to the specimen is between 400 MPa to 600 MPa and the test temperature is 850°C. The study will focus on the creep behaviour of the 52000 hours service-exposed blades, complemented with creep-rupture modelling using JMatPro software and microstructure examination using optical microscope. The test specimens, made up of Ni-based superalloy of the first stage turbine blades, are machined based on International Standard (ISO 24. The results from the SRT will be analyzed using these two main equations – Larson-Miller Parameter and Life Fraction Rule. Based on the results of the remaining useful life analysis, the 52000h service-exposed blade has the condition to operate in the range of another 4751 hr to 18362 hr. The microstructure examinations shows traces of carbide precipitation that deteriorate the grain boundaries that occurs during creep process. Creep-rupture life modelling using JMatPro software has shown good agreement with the accelerated creep rupture test with minimal error.

  15. Penerapan Best Practice IT Service Management dalam Perbaikan IT Service Desk: Studi Kasus PT. Matahari Putra Prima

    Directory of Open Access Journals (Sweden)

    Hendra Hendra

    2011-06-01

    Full Text Available Information Technology (IT grows very rapidly and affects every aspect of business life to support competition with other companies that have the same field. PT. Matahari Putra Prima has implemented a computerized system as one of its business strategy in achieving the company's business objectives. With the implementation of IT in the company, the role of Service Desk is indispensable in providing services to users. This study aims to identify and analyze the implementation of IT Service Desk of PT. Matahari Putra Prima to the users. This research is expected to increase and improve the quality of IT Service Desk PT. Matahari Putra Prima based on the IT Service Management (ITSM. 

  16. Life Management of high energy piping girth welds

    International Nuclear Information System (INIS)

    Cohn, M.J.; Paterson, S.R.

    1994-01-01

    Life management of high energy piping systems is a synergistic process that combines the collective results from nondestructive examination (NDE), stress analysis, metallurgical replication, and fracture mechanics evaluations. To achieve conclusions with high confidence and reliability, the methodology requires that: (1) all weldments must be appropriately examined to establish initial baseline data and indicate both fabrication and inservice damage, (2) as-found stress analyses must be consistent with field estimated displacements to select sites of maximum in-service damage, and (3) metallurgical replicas must be taken at high stress sites determined as an outcome of a life exhaustion evaluation. The multidiscipline tasks are effectively managed by developing a rational framework incorporating all of the above requirements. Analytical algorithms that estimate linear and nonlinear degradation effects are included in the remaining life predictions. High damage locations are selected based on a life exhaustion calculation. Localized remaining life and reexamination intervals for failures governed by creep and fatigue damage are estimated by metallurgical replica cavitation damage and the service life. Stress-based creep damage identified in metallurgical replicas should correspond to the predicted high damage locations from the life exhaustion calculation. The methodology minimizes future reexamination locations while providing high certainty of monitoring lead-the-fleet damage. This life management program recognizes the aging process in plant equipment. It establishes a continuous process of examinations, evaluations, and decisions to track degradation of the piping system life cycle. Potential problems are identified long before failures occur. Corrective action is taken during scheduled outages to maintain the required level of plant performance

  17. Veterans transitioning from isolation to integration: a look at veteran/service dog partnerships.

    Science.gov (United States)

    Crowe, Terry K; Sánchez, Victoria; Howard, Alyse; Western, Brenna; Barger, Stephanie

    2017-08-13

    This study explored the dynamics of veteran/service dog partnerships by gathering the perspectives of veterans with a history of post-traumatic stress disorder and/or traumatic brain injury. Exploratory qualitative methods (focus groups and individual interviews) were used to investigate veteran/service dog relationships related to community involvement, family and friend relationships, self-care, work, and leisure. Nine male veterans, Paws, and Stripes program graduates participated. Data were audio recorded and transcribed by two research team members who used qualitative analytic software to manage and code the data. The full research team discussed themes and reached consensus on the themes that emerged from analysis. Five themes emerged about the perceived benefit of veteran/service dog relationship: Secluded but Seeking Society (moving from isolation to reconnection); Opening Opportunities (navigating daily life); Bridging the Gap (facilitating social opportunities); and Reclaiming Life (transforming sense of worth and purpose). An overarching theme, Calming Catalyst, connected the other four themes. Veterans in this study reported that their goal was to reclaim and develop key aspects of their lives and they perceived service dogs as a support in their transition from isolation to reintegration. This study found that service dogs supported the veterans to meet their goal. Implications for rehabilitation There are a significant number of veterans with post-traumatic stress disorder and/or traumatic brain injury who are facing life challenges including self-care, securing work, participating in leisure activities, and integrating into the community. Service dogs are an emerging intervention used to assist veterans with reintegration into civilian life. There is a need for professionals to be aware of potential benefits of service dog/veteran partnerships. Based on our findings, veterans could benefit from being paired with a service dog to facilitate their

  18. Smart Service Portfolios: Do the Cities Follow Standards?

    NARCIS (Netherlands)

    Anthopoulos, Leonidas; Janssen, M.F.W.H.A.; Weerakkody, Vishanth

    2016-01-01

    Smart services concern the core element of a smart city, since they support the realization of urban "intelligence" in terms of people, economy, governance, environment, mobility and leaving. Smart services aim to enhance quality of life within a city and in this respect to improve "livability". The

  19. Asphalt Concrete Mixtures: Requirements with regard to Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Jan Mikolaj

    2015-01-01

    Full Text Available Design of asphalt concrete, required properties of constituent materials and their mixing ratios, is of tremendous significance and should be implemented with consideration given to the whole life cycle of those materials and the final construction. Conformity with requirements for long term performance of embedded materials is the general objective of the Life Cycle Assessment (LCA. Therefore, within the assessment, material properties need to be evaluated with consideration given to the whole service life—from the point of embedding in the construction until their disposal or recycling. The evaluation focuses on verification of conformity with criteria set for these materials and should guarantee serviceability and performance during their whole service life. Recycling and reuse of asphalt concrete should be preferred over disposal of the material. This paper presents methodology for LCA of asphalt concrete. It was created to ensure not only applicability of the materials in the initial stage, at the point of their embedding, but their suitability in terms of normatively prescribed service performance of the final construction. Methods described and results are presented in a case study for asphalt mixture AC 11; I design.

  20. The Deployment Life Study. Appendixes

    Science.gov (United States)

    2014-01-01

    hyperactivity SdQ (Goodman, 1997) x x x x Child peer relationships SdQ (Goodman, 1997) x x x x Child prosocial behavior SdQ (Goodman, 1997) x x x x...2 Th e d ep lo ym en t Life Stu d y: M eth o d o lo g ical O verview an d B aselin e Sam p le d escrip tio n Table A.1 List of Constructs and...Life Study x x List o f C o n stru cts an d M easu res fo r th e d ep lo ym en t Life Stu d y 3 Survey Topic Measure Source Service Member Spouse

  1. Factors Affecting Customer’s Perception of Service Quality: Comparing Differences among Countries - Case study: Beauty salons in Bandung and Tokyo

    Directory of Open Access Journals (Sweden)

    Keiko Nakashima

    2012-01-01

    Full Text Available This paper examines a holistic study of analyzing several factors affecting service quality andtheir correlation with characteristic of customers based on value and life style. Furthermore,customer’s perception of service quality can be drawn from those relationships. Exploratoryfactor analysis and quantitative analysis is employed with case study of beauty salon serviceat Bandung and Tokyo. The results indicate how the quality of services is perceived differentlyby customers who have different value and life style, and also describe significant relationshipbetween value and life style with the affecting factors of service quality.Key words : service quality, value and life style, customer perception, beauty salon.

  2. Should the service life of nuclear power plants be limited for technical reasons?; Mela by byt provozni zivotnost jaderne elektrarny z technickych duvodu omezena?

    Energy Technology Data Exchange (ETDEWEB)

    Schomer, E

    1995-03-01

    German nuclear power plant operating licenses take into account the fact that the design lifetime of the facilities is 40 years. The technological lifetime, however, is governed by actual ageing processes and operational burden. The service life of nuclear power plants can be extended by replacement of the steam generator and by repair or replacement of the reactor pressure vessel or parts thereof. Attention is also paid to the reactor protection systems. (J.B.). 8 figs.

  3. Multiple chronic conditions and life expectancy: a life table analysis.

    Science.gov (United States)

    DuGoff, Eva H; Canudas-Romo, Vladimir; Buttorff, Christine; Leff, Bruce; Anderson, Gerard F

    2014-08-01

    The number of people living with multiple chronic conditions is increasing, but we know little about the impact of multimorbidity on life expectancy. We analyze life expectancy in Medicare beneficiaries by number of chronic conditions. A retrospective cohort study using single-decrement period life tables. Medicare fee-for-service beneficiaries (N=1,372,272) aged 67 and older as of January 1, 2008. Our primary outcome measure is life expectancy. We categorize study subjects by sex, race, selected chronic conditions (heart disease, cancer, chronic obstructive pulmonary disease, stroke, and Alzheimer disease), and number of comorbid conditions. Comorbidity was measured as a count of conditions collected by Chronic Conditions Warehouse and the Charlson Comorbidity Index. Life expectancy decreases with each additional chronic condition. A 67-year-old individual with no chronic conditions will live on average 22.6 additional years. A 67-year-old individual with 5 chronic conditions and ≥10 chronic conditions will live 7.7 fewer years and 17.6 fewer years, respectively. The average marginal decline in life expectancy is 1.8 years with each additional chronic condition-ranging from 0.4 fewer years with the first condition to 2.6 fewer years with the sixth condition. These results are consistent by sex and race. We observe differences in life expectancy by selected conditions at 67, but these differences diminish with age and increasing numbers of comorbid conditions. Social Security and Medicare actuaries should account for the growing number of beneficiaries with multiple chronic conditions when determining population projections and trust fund solvency.

  4. Mobile Information Systems for the Private Everyday Life

    Directory of Open Access Journals (Sweden)

    Oliver Bohl

    2007-01-01

    Full Text Available Despite the high penetration of the private sector in mobile devices, only few applications and services based on mobile technologies are used, and those are rather trivial. This article suggests an approach for the identification of alternatives for the support of processes of everyday life by establishing services based on mobile applications, mobile devices and infrastructures for mobile dispositions. Therefore, a framework for the identification, as well as criteria for the analysis of potential fields of application is discussed. Exemplary benchmarks for selected basic processes in private everyday life visualise the suggested framework, which can be adapted for individual methodical analyses.

  5. Measuring tourists' satisfaction with quality of life issues at an arts festival

    Directory of Open Access Journals (Sweden)

    S. Kruger

    2008-12-01

    Full Text Available Purpose: The purpose of this paper is to measure tourists' satisfaction with quality of life issues at an arts festival - the Aardklop National Arts Festival in Potchefstroom. Problem investigated: Understanding satisfaction with quality of life issues could assist Festival organizers and other businesses to improve services for tourists by tailoring these to meet their needs. Satisfied tourists spread positive word-of-mouth communication and are more likely to return in the future. Methodology: A self-administered survey developed and validated by Neal, Sirgy and Uysal (1999:156 & 2004:245 was fielded at the 2007 Aardklop National Arts Festival in Potchefstroom. The target population included all visitors to the Festival who were staying for two or more days, and who had travelled to Potchefstroom from elsewhere. Findings and implications: Respondents were satisfied with travel / tourism services and experiences at the Festival, and with their leisure time and life in general. However, certain things at the Festival led to lowered levels of satisfaction. Demographically, respondents did not differ significantly in their levels of satisfaction with travel / tourism services, travel / tourism experiences, leisure life, and life in general at the Festival except in terms of population group and region from which they came. Organizers of the Festival and other businesses should take cognizance of the fact that all parties involved in providing services to tourists attending an arts festival impact on their satisfaction levels with travel / tourism services and experiences - and ultimately also on their quality of life. Tourists attending the arts festival are not homogenous and differ substantially in terms of their demographic profile. Tourist service providers should tailor their offerings in order to satisfy the varied needs of the different types of tourist attending the Festival. Originality and value of the research: This research focused on

  6. Work-life balance and family friendly policies

    Directory of Open Access Journals (Sweden)

    Janine Chapman

    2013-12-01

    Full Text Available This paper presents Australian and international research on work-life interaction. We review the work-life policies and practices that are likely to have the greatest impact on work-life outcomes, specifically reducing the negative impact of work on other life domains (work-life interference, and enhancing the positive effect (work-life facilitation. The review addresses four policy areas common in work-life studies of the general workforce: employee-centered flexible work practices; working hours (e.g. access to part-time work; paid and unpaid leave (e.g. parental leave; and access to childcare. It then considers the work-life literature related to two specific industries – the Australian public sector, and health and social services – to identify work-life issues and practices specific to each industry. We then conclude with a general discussion of challenges associated with the policy-practice gap, focusing particularly on work intensification and the role of organisational culture as the catalyst for policy uptake and effectiveness.

  7. Product/Service-System Development

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

    2007-01-01

    ‘Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...

  8. Innovating Technological Process for Expanding the Service Life of Underground Power Cables

    Directory of Open Access Journals (Sweden)

    Tabacaru V.

    2016-08-01

    Full Text Available As a public power distribution operator on low voltage (023/0.4 kV, medium voltage (6 and 20 kV, and high voltage (110 kV in the territory of Galati County, SDEE Galati serves approximately 240,000 consumers (captive and eligible, domestic and non-domestic For this purpose, in the field of medium voltage underground distribution lines, SDEE Galati manages and operates a volume of approx. 500 km UDL/6kV circuit and approximately 630 km UDL/20 kV circuit. Many of these cables which are still in operation, were manufactured with materials and on the technological level of the ’60s,’70s and ‘80s decades and have reached the end of their service life. Evidence does and incident statistics from these networks in which, every year, one of the "tips" is the medium voltage cables damaged "technical wear" normal operating conditions. The current paper will present the main features of an innovating technological process called SPR (Sustained Pressure Rejuvenation, designed for on-site refurbishing of underground power cable insulation medium and high voltage. The process offers a viable alternative that has proven, over the 25 years of application initially on the American content and now on the worldwide, substantially more cost effective than replacing cables. The paper does not propose detailed presentation of the technological process, but to inform the family of energetics NPS about the existence and the benefits of applying this new technological process to the old cable medium and high voltage.

  9. STRATEGIC MARKETING AND QUALITY OF LIFE

    Directory of Open Access Journals (Sweden)

    Ploesteanu Mara Gabriela

    2012-12-01

    Full Text Available Theme The strategic marketing phase is one of systematic and continuous analysis of market needs in which the concepts of high performance products or services are developed, further provide the qualitative difference to customer, and which target different categories of consumers, ensuring long-term competitive advantages while increasing their personal welfare and the one society in general. Objectives of the Research The main purpose of our article is to make a documentary study of strategic marketing and quality of life concepts, wanting to emphasize the link between the two, the evolution stages of the concept quality of life and their integration into the concept of quality of life marketing. Research Methodology In order to achieve that goal, a documentary study was conducted, that took into account the conceptualization of the term quality of life marketing. Results The link between quality of life and marketing is even more obviously given by the new paradigm of it - relationship marketing. This focuses on building long term relationships with clients, based on their level of satisfaction felt in relation to company’s products and services. Starting from this philosophy of relationship marketing, we can say that marketers are inclined towards a subjective definition of quality of life, depending on individual needs and their level of satisfaction Implications The term of quality of life has been introduced in the marketing literature in the last decade and is defined as a marketing practice designed to improve the welfare of clients while maintaining the welfare of other stakeholders of the company. This concept comes as a sequel of the concerns of the relational marketing specialists to provide a high quality offer to customers and add value to all other stakeholders interested in the smooth running of the company (suppliers, distributors, shareholders, employees, general public and various public bodies interacting with the

  10. Employee Benefit Status from E-Employee Service

    Science.gov (United States)

    Gündüz, Semseddin; Çoklar, Ahmet Naci

    2017-01-01

    The internet is the one of the most important global network and information source in information age. The internet has changed employee's life enormously. The purpose of this study is to clarify the benefitting situations of employees from e-employee services. For this purpose, a 20-item data collection tool, based on the e-employee services put…

  11. A Literature Review on Quality Teacher’s Working Life

    Directory of Open Access Journals (Sweden)

    Ishak Siti Intan Diyana

    2018-01-01

    Full Text Available Quality of work life is becoming an imperative issue to achieve the goals of the organization in every sector whether it is education, tourism, service sector, manufacturing, banking sector and other. Quality of work life it about work environment, reward, organizational commitment, recognition, participative management, work life balance, welfare facilities, proper grievances handling, job satisfaction and other. High quality of work life can give a result in better organizational performance, effectiveness and innovativeness. Quality of work life also affects the social responsibility. This is because quality of work life can improves the family life as well as work life of the individual. This paper focuses and analyse the literature review on the quality of teacher work life.justified.

  12. Considerations on Albanian Life Insurance Market

    Directory of Open Access Journals (Sweden)

    Gentiana Sharku

    2011-03-01

    Full Text Available The life insurance sector is an important sector of the economy all over the world. Life insurance provides the economy and the individuals as well, a variety of fundamental financial services.Regardless the importance it has all around the world, life insurance market in Albania is still underdeveloped comparing not only to the Western European countries, but to the region countries as well. The comparative analysis of insurance market is carried out by means of two indexes: insurance density and penetration index. The life insurance market in Albania is facing several problems which will be further explained in the paper, together with some recommendations to be taken in account by Albanian insurance companies and the Albanian government as well.

  13. Multiple chronic conditions and life expectancy

    DEFF Research Database (Denmark)

    DuGoff, Eva H; Canudas-Romo, Vladimir; Buttorff, Christine

    2014-01-01

    BACKGROUND: The number of people living with multiple chronic conditions is increasing, but we know little about the impact of multimorbidity on life expectancy. OBJECTIVE: We analyze life expectancy in Medicare beneficiaries by number of chronic conditions. RESEARCH DESIGN: A retrospective cohort...... study using single-decrement period life tables. SUBJECTS: Medicare fee-for-service beneficiaries (N=1,372,272) aged 67 and older as of January 1, 2008. MEASURES: Our primary outcome measure is life expectancy. We categorize study subjects by sex, race, selected chronic conditions (heart disease, cancer...... and increasing numbers of comorbid conditions. CONCLUSIONS: Social Security and Medicare actuaries should account for the growing number of beneficiaries with multiple chronic conditions when determining population projections and trust fund solvency....

  14. 34 CFR 106.39 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Health and insurance benefits and services. 106.39... Prohibited § 106.39 Health and insurance benefits and services. In providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a recipient shall not...

  15. 10 CFR 1042.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Health and insurance benefits and services. 1042.440... in Education Programs or Activities Prohibited § 1042.440 Health and insurance benefits and services. Subject to § 1042.235(d), in providing a medical, hospital, accident, or life insurance benefit, service...

  16. 45 CFR 86.39 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Health and insurance benefits and services. 86.39... Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 86.39 Health and insurance benefits and services. In providing a medical, hospital, accident, or life insurance benefit, service...

  17. Group Life Insurance

    CERN Multimedia

    2013-01-01

    The CERN Administration would like to remind you that staff members and fellows have the possibility to take out a life insurance contract on favourable terms through a Group Life Insurance.   This insurance is provided by the company Helvetia and is available to you on a voluntary basis. The premium, which varies depending on the age and gender of the person insured, is calculated on the basis of the amount of the death benefit chosen by the staff member/fellow and can be purchased in slices of 10,000 CHF.    The contract normally ends at the retirement age (65/67 years) or when the staff member/fellow leaves the Organization. The premium is deducted monthly from the payroll.   Upon retirement, the staff member can opt to maintain his membership under certain conditions.   More information about Group Life Insurance can be found at: Regulations (in French) Table of premiums The Pension Fund Benefit Service &...

  18. Recovery of creep properties of alloy 625 after long term service

    International Nuclear Information System (INIS)

    Mathew, M.D.; Bhanu Sankara Rao, K.; Mannan, S.L.; Paknikar, K.

    2000-01-01

    Creep rupture properties of alloy 625, that has been in service for 60000 h at 993 K, have been evaluated between 923 and 1173 K, after subjecting the service exposed material to resolution annealing treatment at 1433 K for one hour. The isostress and Larson-Miller parameter methods were employed to estimate the residual life of the service exposed material. Creep rupture strength and rupture ductility recovered substantially following re-solution annealing. The variations in rupture life and rupture ductility with creep test variables have been rationalised on the basis of the microstructural changes that occurred in the material. (orig.)

  19. Methodology for predicting the life of waste-package materials, and components using multifactor accelerated life tests

    International Nuclear Information System (INIS)

    Thomas, R.E.; Cote, R.W.

    1983-09-01

    Accelerated life tests are essential for estimating the service life of waste-package materials and components. A recommended methodology for generating accelerated life tests is described in this report. The objective of the methodology is to define an accelerated life test program that is scientifically and statistically defensible. The methodology is carried out using a select team of scientists and usually requires 4 to 12 man-months of effort. Specific agendas for the successive meetings of the team are included in the report for use by the team manager. The agendas include assignments for the team scientists and a different set of assignments for the team statistician. The report also includes descriptions of factorial tables, hierarchical trees, and associated mathematical models that are proposed as technical tools to guide the efforts of the design team

  20. Evaluation of an Organisational Intervention to Promote Integrated Working between Health Services and Care Homes in the Delivery of End-of-Life Care for People with Dementia: Understanding the Change Process Using a Social Identity Approach

    Directory of Open Access Journals (Sweden)

    Sarah Amador

    2016-06-01

    Full Text Available In the United Kingdom, approximately a third of people with dementia live in long-term care facilities for adults, the majority of whom are in the last years of life. Working arrangements between health services and care homes in England are largely ad hoc and often inequitable, yet quality end-of-life care for people with dementia in these settings requires a partnership approach to care that builds on existing practice. This paper reports on the qualitative component of a mixed method study aimed at evaluating an organisational intervention shaped by Appreciative Inquiry to promote integrated working between visiting health care practitioners (i.e. General Practitioners and District Nurses and care home staff. The evaluation uses a social identity approach to elucidate the mechanisms of action that underlie the intervention, and understand how organisational change can be achieved. We uncovered evidence of both (i identity mobilisation and (ii context change, defined in theory as mechanisms to overcome divisions in healthcare. Specifically, the intervention supported integrated working across health and social care settings by (i the development of a common group identity built on shared views and goals, but also recognition of knowledge and expertise specific to each service group which served common goals in the delivery of end-of-life care, and (ii development of context specific practice innovations and the introduction of existing end-of-life care tools and frameworks, which could consequently be implemented as part of a meaningful bottom-up rather than top-down process. Interventions structured around a Social Identity Approach can be used to gauge the congruence of values and goals between service groups without which efforts to achieve greater integration between different health services may prove ineffectual. The strength of the approach is its ability to accommodate the diversity of service groups involved in a given area of care

  1. Evaluation of an Organisational Intervention to Promote Integrated Working between Health Services and Care Homes in the Delivery of End-of-Life Care for People with Dementia: Understanding the Change Process Using a Social Identity Approach.

    Science.gov (United States)

    Amador, Sarah; Goodman, Claire; Mathie, Elspeth; Nicholson, Caroline

    2016-06-03

    In the United Kingdom, approximately a third of people with dementia live in long-term care facilities for adults, the majority of whom are in the last years of life. Working arrangements between health services and care homes in England are largely ad hoc and often inequitable, yet quality end-of-life care for people with dementia in these settings requires a partnership approach to care that builds on existing practice. This paper reports on the qualitative component of a mixed method study aimed at evaluating an organisational intervention shaped by Appreciative Inquiry to promote integrated working between visiting health care practitioners (i.e. General Practitioners and District Nurses) and care home staff. The evaluation uses a social identity approach to elucidate the mechanisms of action that underlie the intervention, and understand how organisational change can be achieved. We uncovered evidence of both (i) identity mobilisation and (ii) context change, defined in theory as mechanisms to overcome divisions in healthcare. Specifically, the intervention supported integrated working across health and social care settings by (i) the development of a common group identity built on shared views and goals, but also recognition of knowledge and expertise specific to each service group which served common goals in the delivery of end-of-life care, and (ii) development of context specific practice innovations and the introduction of existing end-of-life care tools and frameworks, which could consequently be implemented as part of a meaningful bottom-up rather than top-down process. Interventions structured around a Social Identity Approach can be used to gauge the congruence of values and goals between service groups without which efforts to achieve greater integration between different health services may prove ineffectual. The strength of the approach is its ability to accommodate the diversity of service groups involved in a given area of care, by valuing their

  2. Strategic Planning For The Fire Service

    Science.gov (United States)

    2016-03-01

    jamming, think in time, think in resources, think in life cycles, and think in experiments and bets .”197 Thinking in paradoxes is the strategic...decreasing costs. Futures methodology scenario planning would allow Fire Service leaders to think through plausible “what if” scenarios before they occur...while decreasing costs. Futures methodology scenario planning would allow Fire Service leaders to think through plausible “what if” scenarios before

  3. Tele-operated service robots for household and care

    NARCIS (Netherlands)

    Osch, van M.P.W.J.; Bera, D.; Koks, Y.; Hee, van K.M.; Bronswijk, van J.E.M.H.; Maas, G.J.; Gassel, van F.J.M.

    2012-01-01

    Purpose: Service robots are a relatively new branch of robotics after the successful industry robots and the experimental humanoids. Service robots are supposed to perform tasks that normally are done by humans in particular daily life activities. However they do not have to do it in the same way as

  4. Optimizing the data life cycle

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Kilian [GSI, Planckstr. 1, 64291 Darmstadt (Germany); Jung, Christopher [KIT, Kaiserstrasse 12, 76131 Karlsruhe (Germany)

    2013-07-01

    Today, data play a central role in most fields of Science. In recent years, the amount of data from experiment, observation, and simulation has increased rapidly and the data complexity has grown. Also, communities and shared storage have become geographically more distributed. Therefore, methods and techniques applied for scientific data need to be revised and partially be replaced, while keeping the community-specific needs in focus. The Helmholtz Portfolio Extension ''Large Scale Data Management and Analysis'' (LSDMA) focuses on the optimization of the data life cycle in different research areas. In its five Data Life Cycle Labs (DLCLs), data experts closely collaborate with the communities in joint research and development to optimize the respective data life cycle. In addition, the Data Services Integration Team provides data analysis tools and services which are common to several DLCLs. This presentation describes the various activities within LSDMA and focuses on the work done in the DLCL ''Structure of Matter''. The main topics of this DLCL are the support for the international projects FAIR (Facility for Anti Proton and Ion Research) which will evolve around GSI in Darmstadt and the European XFEL and PETRA III at DESY in Hamburg.

  5. 45 CFR 618.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Health and insurance benefits and services. 618....440 Health and insurance benefits and services. Subject to § 618.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a recipient...

  6. 10 CFR 5.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Health and insurance benefits and services. 5.440 Section... Education Programs or Activities Prohibited § 5.440 Health and insurance benefits and services. Subject to § 5.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or...

  7. 32 CFR 196.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Health and insurance benefits and services. 196... Activities Prohibited § 196.440 Health and insurance benefits and services. Subject to § 196.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its...

  8. 29 CFR 36.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Health and insurance benefits and services. 36.440 Section... Education Programs or Activities Prohibited § 36.440 Health and insurance benefits and services. Subject to § 36.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or...

  9. 45 CFR 2555.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Health and insurance benefits and services. 2555... Activities Prohibited § 2555.440 Health and insurance benefits and services. Subject to § 2555.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its...

  10. System-level change in mental health services in North Wales: An observational study using systems thinking.

    Science.gov (United States)

    Evans, S; Huxley, P J; Maxwell, N; Huxley, K L S

    2014-06-01

    To describe changes to mental health services using systems thinking. Structured standardized quality of life assessment (Manchester Short Quality of Life Assessment: MANSA) was used to establish service user priorities for changes to service provision (part of a process known as check in systems thinking). Current service performance in these priority areas was identified, and changes to service arrangements were planned, implemented and monitored by task and finish (T&F) groups (making use of a process known as flow in systems thinking). 81 MANSA assessments were completed at the check stage (by NM). Work finances and leisure activities emerged as service user priority areas for change, and T&F groups were established with representation of all sectors and service users. Ways to make improvements were observed, planned and implemented by T&F groups (the flow stage). The systems approach reveals how services and quality of life have been changed for patients in Wrexham. Further generalizable research is needed into the potential benefits of using systems thinking in mental health service evaluation. © The Author(s) 2013.

  11. 26 CFR 1.273-1 - Life or terminable interests.

    Science.gov (United States)

    2010-04-01

    ....273-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Items Not Deductible § 1.273-1 Life or terminable interests. Amounts paid as income to the holder of a life or a terminable interest acquired by gift, bequest, or inheritance shall not...

  12. CONSUMERS PRODUCTS AND SERVICES VALUE PERCEPTION

    Directory of Open Access Journals (Sweden)

    Bogdan Nichifor

    2008-12-01

    Full Text Available This article is a theoretical approach on products and services as value satisfiers. Consumers have knowledge about the personal, symbolic values that products, services and brands help them satisfy or achieve. Values are people’s broad life goals. Values often involve the emotional affect associated with such goals and needs (the strong feelings and emotions that accompany success. Recognizing when a value has been satisfied or a basic life goal has been achieved is an internal feeling that is somewhat intangible and subjective. In contrast, functional and psychosocial consequences are more tangible and are more obvious when they occur. Salespeople add value by identifying customer needs and devising or delivering a solution for those needs. Salespeople are able to adapt how products or/and services are presented or even to adapt products/services so that they meet the needs of the buyers. Such adaption powers professional selling, because customers often don’t know what they need or how to configure a solution to their needs. Satisfying a value usually elicits positive affect (happiness, joy, satisfaction, whereas blocking a value produces negative affect (frustration, anger, disappointment. Consumers can have products and services knowledge about products and services attributes, consequences of products or services use and personal values. Most marketing research focuses on one type of products and services knowledge – usually attributes or consequences, where the focus typically is on benefits rather than risks. Values are examined less frequently and usually in isolation. This paper objective is to show the importance of creating, delivering, and capturing buyer value. A company’s ability to deliver value to its customers is closely tied with its ability to create satisfaction for its employees and other stakeholders. Value ultimately depends on the perceiver. Smart companies not only offer purchase value but also offer use value

  13. Letter: On abortion and right to life.

    Science.gov (United States)

    Kirsch, E J

    1976-09-01

    Recently, I read Dr. C. Arden Miller's Presidential Address which was published in your January 1976 issue. A distressing contradiction appears because he states that the 1973 Supreme Court ruling on abortion was an important step to establish rights to health services. He fails to mention the right of the unborn to health services yet quotes from Edith Hamilton. His very significant quote is as follows: ''a world in which no individual shall be sacrificed for an end, but in which each will be willing to sacrifice himself for the end of working for the good of others in the spirit of love with the God who is love.'' Each child whether unborn or born is an individual and should not be sacrificed for an end. The good of others is preservation of human life in the spirit of love for each other. The Supreme Court ruling liberalized the destruction of life and did not recognize the human rights of the unborn to health services. The American Public Health Association (APHA) cannot derive strength from its diversity when its members advocate abortion under the guise of concern for the well being of people. The work of APHA should be societal change for the sake of human right to life and not for any purpose which will not serve that right.

  14. Predicting the service life of connecting rod and main bearings, taking into account different engine loads. Final report; Lebensdauervorhersage fuer Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Berkowitz, B.; Lueneburg, B.; Liu, J.

    1994-12-31

    Connecting rod and main bearings of internal combustion engines are among the most heavily stressed components in modern engines. It was found that these engine components are increasingly reaching the limits of their strength and therefore become the components limiting engine life. However, there is no known process which makes a calculated prediction of the service life of modern connecting rod and main bearings possible, taking into account various engine loads. In this research project, a new concept for the calculated prediction of the service life of non-static highly loaded radial sliding bearings is worked out. The basis is a process of calculation which realistically determines the pressure and gap course in highly loaded sliding bearings. Apart from the viscosity depending on pressure and temperature, the elastic deformations of the system sliding bearing/conn rod are also taken into account. Calculations are done for different operating points for a complete cycle of a four stroke Diesel engine (Daimler-Benz OM 364 LA). The results are compared with the present conventional process of calculation and the effects which occur are discussed. Based on the elasto-hydrodynamic calculation, a method of calculating the service life of non-statically loaded sliding bearings, taking into account various motor loads, is worked out. (orig./HW) [Deutsch] Pleuel- und Hauptlager von Verbrennungskraftmaschinen zaehlen mit zu den spezifisch am hoechsten beanspruchten Bauteilen in modernen Motoren. Es hat sich gezeigt, dass vor allem diese Maschinenelemente zunehmend an die Grenzen ihrer Belastbarkeit stossen und so zum lebensdauerbegrenzenden Bauteil werden. Es ist jedoch kein Verfahren bekannt, das eine rechnerische Lebensdauervorhersage moderner Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive ermoeglicht. Im vorliegenden Forschungsvorhaben wird daher ein neuartiges Konzept zur rechnerischen Lebensdauervorhersage von instationaeren

  15. Accelerated battery-life testing - A concept

    Science.gov (United States)

    Mccallum, J.; Thomas, R. E.

    1971-01-01

    Test program, employing empirical, statistical and physical methods, determines service life and failure probabilities of electrochemical cells and batteries, and is applicable to testing mechanical, electrical, and chemical devices. Data obtained aids long-term performance prediction of battery or cell.

  16. Environmental impacts of construction materials use: a life cycle perspective

    CSIR Research Space (South Africa)

    Ampofo-Anti, N

    2009-02-01

    Full Text Available of the environmental impacts of a product (or service). The Life Cycle Assessment (LCA) concept previously known as Life Cycle Analysis has emerged as one of the most appropriate tools for assessing product-related environmental impacts and for supporting an effective...

  17. Dealing with Emergy Algebra in the Life Cycle Assessment Framework

    Science.gov (United States)

    The Life Cycle Inventory (LCI) represents one of the four steps of the Life Cycle Assessment (LCA) methodology, which is a standardized procedure (ISO 14040:2006) to estimate the environmental impacts generated by the production, use and disposal of goods and services. In this co...

  18. Exploring the Effect of Autism Waiver Services on Family Outcomes

    Science.gov (United States)

    Eskow, Karen; Pineles, Lisa; Summers, Jean Ann

    2011-01-01

    This study examined the effect of services provided through Maryland's Home and Community-Based Services Medicaid waiver for children with autism on several outcomes related to families, specifically family quality of life (FQoL) and employment. The purpose of this study was to assess the impact of the services provided through the Maryland autism…

  19. Integrated earth system dynamic modeling for life cycle impact assessment of ecosystem services.

    Science.gov (United States)

    Arbault, Damien; Rivière, Mylène; Rugani, Benedetto; Benetto, Enrico; Tiruta-Barna, Ligia

    2014-02-15

    Despite the increasing awareness of our dependence on Ecosystem Services (ES), Life Cycle Impact Assessment (LCIA) does not explicitly and fully assess the damages caused by human activities on ES generation. Recent improvements in LCIA focus on specific cause-effect chains, mainly related to land use changes, leading to Characterization Factors (CFs) at the midpoint assessment level. However, despite the complexity and temporal dynamics of ES, current LCIA approaches consider the environmental mechanisms underneath ES to be independent from each other and devoid of dynamic character, leading to constant CFs whose representativeness is debatable. This paper takes a step forward and is aimed at demonstrating the feasibility of using an integrated earth system dynamic modeling perspective to retrieve time- and scenario-dependent CFs that consider the complex interlinkages between natural processes delivering ES. The GUMBO (Global Unified Metamodel of the Biosphere) model is used to quantify changes in ES production in physical terms - leading to midpoint CFs - and changes in human welfare indicators, which are considered here as endpoint CFs. The interpretation of the obtained results highlights the key methodological challenges to be solved to consider this approach as a robust alternative to the mainstream rationale currently adopted in LCIA. Further research should focus on increasing the granularity of environmental interventions in the modeling tools to match current standards in LCA and on adapting the conceptual approach to a spatially-explicit integrated model. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. Nuclear power plant life management

    International Nuclear Information System (INIS)

    Rorive, P.; Berthe, J.; Lafaille, J.P.; Eussen, G.

    1998-01-01

    Several definitions can be given to the design life of a nuclear power plant just as they can be attributed to the design life of an industrial installation: the book-keeping life which is the duration of the provision for depreciation of the plant, the licensed life which corresponds to the duration for which the plant license has been granted and beyond which a new license should be granted by the safety authorities, the design life which corresponds to the duration specified for ageing and fatigue calculations in the design of some selected components during the plant design phase, the technical life which is the duration of effective technical operation and finally the economic life corresponding to the duration of profitable operation of the plant compared with other means of electricity production. Plant life management refers to the measures taken to cope with the combination of licensed, design, technical and economical life. They can include repairs and replacements of components which have arrived to the end of their life due to known degradation processes such as fatigue, embrittlement, corrosion, wear, erosion, thermal ageing. In all cases however, it is of great importance to plan the intervention so as to minimise the economic impact. Predictive maintenance is used together with in-service inspection programs to fulfil this goal. The paper will go over the methodologies adopted in Belgium in all aspects of electrical, mechanical and civil equipment for managing plant life. (author)

  1. Associations between family characteristics and parental empowerment in the family, family service situations and the family service system.

    Science.gov (United States)

    Vuorenmaa, M; Perälä, M-L; Halme, N; Kaunonen, M; Åstedt-Kurki, P

    2016-01-01

    Parental empowerment signifies parents' sense of confidence in managing their children, interacting with services that their children use and improving child care services. High empowerment is associated with parents' resilience to demands and their confidence to make decisions and take actions that positively affect their families. Most families with children access various healthcare and education services. Professionals working in these services are therefore ideally placed to reinforce parental empowerment. However, little is known about the characteristics associated with parental empowerment within a generic sample of parents or in the context of basic child care services. The aim of this study was to assess how family characteristics are associated with maternal and paternal empowerment in the family, in service situations and in the service system. Parental empowerment was measured among 955 parents (mothers = 571; fathers = 384) of children aged 0-9 years using the Generic Family Empowerment Scale. Family characteristics were assessed through questions on children, parents and the life situation. Associations between empowerment and family characteristics were evaluated using one-way analysis of variance and t-test. Parental empowerment was predicted by multiple linear regression analysis. Parents' concerns related to their parenting, such as whether they possessed sufficient skills as a parent or losing their temper with children, as well as experiences of stress in everyday life, were negatively associated with all dimensions of maternal and paternal empowerment. Both determinants were more common and more significant in empowerment than child-related problems. Promoting parental self-confidence and providing appropriate emotional and concrete support for everyday functioning may reinforce parental empowerment, thereby enhancing families' well-being and coping, as well as improving their access to required services and timely support. Finally

  2. Computers make rig life extension an option

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The worldwide semisubmersible drilling rig fleet is approaching retirement. But replacement is not an attractive option even though dayrates are reaching record highs. In 1991, Schlumberger Sedco Forex managers decided that an alternative might exist if regulators and insurers could be convinced to extend rig life expectancy through restoration. Sedco Forex chose their No. 704 semisubmersible, an 18-year North Sea veteran, to test their process. The first step was to determine what required restoration, meaning fatigue life analysis of each weld on the huge vessel. If inspected, the task would be unacceptably time-consuming and of questionable accuracy. Instead a suite of computer programs modeled the stress seen by each weld, statistically estimated the sea states seen by the rig throughout its North Sea service and calibrated a beam-element model on which to run their computer simulations. The elastic stiffness of the structure and detailed stress analysis of each weld was performed with ANSYS, a commercially available finite-element analysis program. The use of computer codes to evaluate service life extension is described.

  3. Turbine casing bolts; a life assessment and bolt replacement strategy

    Energy Technology Data Exchange (ETDEWEB)

    Bulloch, J H [ESB, Power Generation, Dublin (Ireland)

    1999-12-31

    The present presentation describes a detailed study concerning the life assessment and replacement strategy of large turbine casing bolts in a 120 MW steam raising unit. After 122000 hours service, circa 1991/92, the Cr-Mo-V steel casing bolts, involving a total of 184 bolts, from two identical 120 MW units, termed Units 1 and 2, were examined to establish the extent of Reverse Temper Embrittlement, RTE, and creep damage suffered during service. The bolt replacement plans for the two units were as follows; Unit 1 bolts were completely replaced with new bolts while Unit 2 embrittled bolts were withdrawn from service and replaced with Non- Embrittled bolts from Unit 1; basically Unit 2 bolts were made up from a mixture of Unit 1 and 2 Non- Embrittled bolts which had been in service for 122000 hours. Remnant life assessments, concerning both embrittlement and creep damage aspects, were earned out on this series of easing bolts at service times 122000, 150000 and 200000 hours. These assessments involved the use of general embrittlement and creep damage laws which were empirically derived and concerned such parameters as microstructural grain size, bulk phosphorus content and accumulated service strain. (orig.) 7 refs.

  4. Turbine casing bolts; a life assessment and bolt replacement strategy

    Energy Technology Data Exchange (ETDEWEB)

    Bulloch, J.H. [ESB, Power Generation, Dublin (Ireland)

    1998-12-31

    The present presentation describes a detailed study concerning the life assessment and replacement strategy of large turbine casing bolts in a 120 MW steam raising unit. After 122000 hours service, circa 1991/92, the Cr-Mo-V steel casing bolts, involving a total of 184 bolts, from two identical 120 MW units, termed Units 1 and 2, were examined to establish the extent of Reverse Temper Embrittlement, RTE, and creep damage suffered during service. The bolt replacement plans for the two units were as follows; Unit 1 bolts were completely replaced with new bolts while Unit 2 embrittled bolts were withdrawn from service and replaced with Non- Embrittled bolts from Unit 1; basically Unit 2 bolts were made up from a mixture of Unit 1 and 2 Non- Embrittled bolts which had been in service for 122000 hours. Remnant life assessments, concerning both embrittlement and creep damage aspects, were earned out on this series of easing bolts at service times 122000, 150000 and 200000 hours. These assessments involved the use of general embrittlement and creep damage laws which were empirically derived and concerned such parameters as microstructural grain size, bulk phosphorus content and accumulated service strain. (orig.) 7 refs.

  5. The Rhode Island Life Saving Score (RILSS)--a proposed life-saving definition for EMS and emergency medicine.

    Science.gov (United States)

    Williams, Kenneth A; Sullivan, Francis M

    2013-12-03

    Emergency Medical Services (EMS) and Emergency Medicine staff are often described as life-saving providers, but there is no generally accepted objective definition of a life saved by these providers. Therefore, a proposed definition is described. Development of this definition began with conceptual rules, followed by a survey of physician EMS medical directors, and then by the development of a tool to implement the definition, and measure its validity and reliability through a review of 100 critical care transport EMS patient charts.

  6. An analysis of structural relationship among achievement motive on social participation, purpose in life, and role expectations among community dwelling elderly attending day services

    Directory of Open Access Journals (Sweden)

    Nobuyuki Sano

    2016-01-01

    Full Text Available Background. Achievement motive is defined as the intention to achieve one’s goals. Achievement motive is assumed to promote clients to choices and actions toward their valuable goal, so it is an important consideration in rehabilitation. Purpose. The purpose of this study is to demonstrate the structural relationship among achievement motive on purpose in life, social participation, and role expectation of community-dwelling elderly people. Methods. Participants were community-dwelling elderly people in day-service centers. A total of 281 participants (male: 127, female: 154 answered the self-administered questionnaire in cross-sectional research. The questionnaire was comprised of demographic data and scales that evaluated achievement motive, social participation, purpose in life, and role expectation. We studied the structural relationship established by our hypothesized model via a structural equation modeling approach. Results. We checked the standardized path coefficients and the modification indices; the modified model’s statistics were a good fit: CFI = 0.984, TLI = 0.983, RMSEA = 0.050, 90% CI [0.044–0.055]. Achievement motive had a significantly direct effect on purpose in life (direct effect = 0.445, p value < 0.001, a significantly indirect effect on purpose in life via social participation or role expectation (indirect effect = 0.170, p value < 0.001 and a total effect on purpose in life (total effect = 0.615. Discussion. This result suggests that enhancing the intention to achieve one’s goals enables participants to feel a spirit of challenge with a purpose and a sense of fulfillment in their daily lives.

  7. An analysis of structural relationship among achievement motive on social participation, purpose in life, and role expectations among community dwelling elderly attending day services.

    Science.gov (United States)

    Sano, Nobuyuki; Kyougoku, Makoto

    2016-01-01

    Background. Achievement motive is defined as the intention to achieve one's goals. Achievement motive is assumed to promote clients to choices and actions toward their valuable goal, so it is an important consideration in rehabilitation. Purpose. The purpose of this study is to demonstrate the structural relationship among achievement motive on purpose in life, social participation, and role expectation of community-dwelling elderly people. Methods. Participants were community-dwelling elderly people in day-service centers. A total of 281 participants (male: 127, female: 154) answered the self-administered questionnaire in cross-sectional research. The questionnaire was comprised of demographic data and scales that evaluated achievement motive, social participation, purpose in life, and role expectation. We studied the structural relationship established by our hypothesized model via a structural equation modeling approach. Results. We checked the standardized path coefficients and the modification indices; the modified model's statistics were a good fit: CFI = 0.984, TLI = 0.983, RMSEA = 0.050, 90% CI [0.044-0.055]. Achievement motive had a significantly direct effect on purpose in life (direct effect = 0.445, p value < 0.001), a significantly indirect effect on purpose in life via social participation or role expectation (indirect effect = 0.170, p value < 0.001) and a total effect on purpose in life (total effect = 0.615). Discussion. This result suggests that enhancing the intention to achieve one's goals enables participants to feel a spirit of challenge with a purpose and a sense of fulfillment in their daily lives.

  8. Transicion de la Escuela a la Vida Adulta Manual de Informacion para la Provision de Servicios de Transicion a los Jovenes con Impedimentos (Transition from School to Adult Life. Manual of Information for the Provision of Transitional Services for Youth with Disabilities).

    Science.gov (United States)

    Puerto Rico State Dept. of Education, Hato Rey. Office of Special Education.

    This manual has been prepared to orient school personnel in the development of programs for the transition of students with disabilities from school to adult life so that they can fulfill their responsibilities in planning and providing services. The laws under which such services are required are reviewed, and the services and planning are…

  9. Plant Life Management of the EC6 Concrete Containment Structure

    Energy Technology Data Exchange (ETDEWEB)

    Abrishami, Homayoun; Ricciuti, Rick; Khan, Azhar [CANDU Energy Inc., Mississauga (Canada)

    2012-03-15

    Aging of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. Due to the complex nature of safety-related structures in nuclear power plants in comparison to other structures, they possess a number of characteristics that make them comparison to other structures, they possess a number of characteristics that make them unique. These characteristics are: thick concrete cross-sections, heavy reinforcement, often one-side access only, subjected to such ageing stresses as irradiation and elevated temperature, in addition to other typical ageing mechanisms (i. e., exposure to freeze/thaw cycles, aggressive chemicals, etc.) that typically affects other types of non-nuclear structures. For a new plant, the Plant Life Management Program (PLiM) should start in the design process and then continues through construction, plant operation and decommissioning. Hence PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and the design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of EC6 (Enhanced CANDU 6) Nuclear Power Plant designed by CANDU Energy Inc. The EC6 is designed for 100-year plant life including a 60-year operating life and an additional 40-year decommissioning period of time. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) life cycle management and ageing management program. In addition to strength and serviceability, durability is a major consideration during the design phase, service life and up to the completion of decommissioning. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental

  10. Plant Life Management of the EC6 Concrete Containment Structure

    International Nuclear Information System (INIS)

    Abrishami, Homayoun; Ricciuti, Rick; Khan, Azhar

    2012-01-01

    Aging of reinforced concrete structures due to service conditions, aggressive environments, or accidents may cause their strength, serviceability and durability to decrease over time. Due to the complex nature of safety-related structures in nuclear power plants in comparison to other structures, they possess a number of characteristics that make them comparison to other structures, they possess a number of characteristics that make them unique. These characteristics are: thick concrete cross-sections, heavy reinforcement, often one-side access only, subjected to such ageing stresses as irradiation and elevated temperature, in addition to other typical ageing mechanisms (i. e., exposure to freeze/thaw cycles, aggressive chemicals, etc.) that typically affects other types of non-nuclear structures. For a new plant, the Plant Life Management Program (PLiM) should start in the design process and then continues through construction, plant operation and decommissioning. Hence PLiM must provide not only Ageing Management program (AMP) but also provide requirements on material characteristic and the design criteria as well. The purpose of this paper is to present the Plant Life Management (PLiM) strategy for the concrete containment structure of EC6 (Enhanced CANDU 6) Nuclear Power Plant designed by CANDU Energy Inc. The EC6 is designed for 100-year plant life including a 60-year operating life and an additional 40-year decommissioning period of time. The approach adopted for the PLiM strategy of the concrete containment structure is a preventive one, key areas being: 1) design methodology, 2) material performance and 3) life cycle management and ageing management program. In addition to strength and serviceability, durability is a major consideration during the design phase, service life and up to the completion of decommissioning. Factors affecting durability design include: a) concrete performance, b) structural application, and c) consideration of environmental

  11. Quality of life and cost factors in panic disorder.

    Science.gov (United States)

    Davidson, J R

    1996-01-01

    Quality of life encompasses domains of personal happiness, role fulfillment, and health status. Increasing attention has been paid to the relationship between quality of life and panic disorder, with accumulating evidence now available to suggest impairment in several domains among subjects with panic disorder. This review summarizes the results of community-based and treatment-seeking populations of subjects with panic disorder. Impaired personal happiness, restricted role functioning, and increased use of health services are all described. Evidence suggests that accurate diagnosis and effective treatment can significantly lessen health service utilization, resulting in substantial cost offset and also leading to increased work productivity and personal effectiveness.

  12. Aircraft Engine Life-Consumption Monitoring for Real-Time Reliability Determination, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The object of this research is to develop an in-service life-monitor system for the prediction of the remaining component and system life of aircraft engines. The...

  13. Outcomes of Nordic mental health systems: life expectancy of patients with mental disorders

    DEFF Research Database (Denmark)

    Wahlbeck, Kristian; Westman, Jeanette; Nordentoft, Merete

    2011-01-01

    People with mental disorders evince excess mortality due to natural and unnatural deaths. The relative life expectancy of people with mental disorders is a proxy measure of effectiveness of social policy and health service provision.......People with mental disorders evince excess mortality due to natural and unnatural deaths. The relative life expectancy of people with mental disorders is a proxy measure of effectiveness of social policy and health service provision....

  14. A creep life assessment method for boiler pipes using small punch creep test

    International Nuclear Information System (INIS)

    Izaki, Toru; Kobayashi, Toshimi; Kusumoto, Junichi; Kanaya, Akihiro

    2009-01-01

    The small punch creep (SPC) test is considered as a highly useful method for creep life assessment for high temperature plant components. SPC uses miniature-sized specimens and does not cause any serious sampling damages, and its assessment accuracy is at a high level. However, in applying the SPC test to the residual creep life assessment of the boiler in service, there are some issues to be studied. In order to apply SPC test to the residual creep life assessment of the 2.25Cr-1Mo steel boiler pipe, the relationship between uniaxial creep stress and the SPC test load has been studied. The virgin material, pre-crept, weldment and service aged samples of 2.25Cr-1Mo steel were tested. It was confirmed that the relationship between uniaxial creep stress and the SPC test load at the same rupture time can be described as a single straight line independent of test conditions and materials. Therefore a life assessment is possible by using SPC test in place of uniaxial creep tests. The creep life assessment using SPC was applied to actual thermal power plant components which are in service.

  15. NPP backfitting and services

    International Nuclear Information System (INIS)

    Pauli, W.; Blumer, U.; Edelmann, X.

    1988-01-01

    The Swiss nuclear power stations are not only of different design (PWR, BWR), but also have been built by several system suppliers over the last 20 years. Consequently, an individual approach has to be adopted for the backfitting and services for each of the five units in operation. Part of the ongoing maintenance effort for nuclear power plants currently in operation is the idea to extend their operating lifetime as long as it appears economic. Although many of the components have been designed for a life of 40 years, their operating period may be extended considerably, provided that proper measures are taken to keep the plants in optimal conditions for this goal. Such measures for a plant life extension program are: assessment of records of actual operating history; additional monitoring where necessary for temperatures, stress, strain, etc.; non-destructive examination techniques; destructive examination of samples removed from service; thermohydraulic and structural analysis for fatigue and fracture; preventive maintenance; repairs; replacement with components of better design and/or material; installation of additions and redundancies where safety is important. 2 refs

  16. Residual services and power increases for components

    International Nuclear Information System (INIS)

    Pauli, W.

    1991-01-01

    As part of the moratorium in Switzerland work in nuclear power stations has been concentrating more on increasing capacity, reducing radiation levels to which personnel is exposed and extending the service life of existing plants. This has meant the requalification, repair or replacement of components and systems some of which have been in operation for more than 20 years. In addition to the classic role of manufacturer, the industry which acts as both supplier and manufacturer of these components also has to be the expertise holder, documentation pool and analysts. The examples described in this article show that close cooperation with operators leads to solutions which fully ensure the safe and successful operation of the plants, even in the second section of their service life. 4 refs

  17. Reliability assessment of creep rupture life for Gr. 91 steel

    International Nuclear Information System (INIS)

    Kim, Woo-Gon; Park, Jae-Young; Kim, Seon-Jin; Jang, Jinsung

    2013-01-01

    Highlights: • Statistical analysis of a number of creep rupture data based on Z parameter. • Determination of the constant C in LM parameter and long-term creep life prediction. • Generation of random variables for Z s and Z cr by Monte-Carlo simulation in a SCRI model. • Examples for design application were reasonably drawn from the viewpoints of reliability. - Abstract: This paper presents reliability assessment of the long-term creep life of Gr. 91 steel, which is a major structural material for high temperature structural components of Generation-IV reactor systems. A number of creep rupture data for Gr. 91 steel were collected through literature surveys, and the long-term creep life was predicted by Larson–Miller parameter. A “Z parameter” method was used to describe the magnitude of the deviation of the creep rupture data to a master curve. A “Service Condition-creep Rupture property Interference (SCRI) model” based on the Z parameter was used to simultaneously consider the scattering of the creep rupture data of materials and the fluctuations of service conditions in reliability assessment. A statistical analysis of the creep rupture data was conducted by the Z parameter. To carry out the SCRI model, a number of random variables for Z s describing service conditions and Z cr describing the dispersion of the creep rupture data were generated using a Monte-Carlo simulation technique. As examples for application, the creep rupture life under a certain service conditions of Gr. 91 steel was reasonably drawn from the viewpoints of reliability

  18. SOA Modeling Patterns for Service Oriented Discovery and Analysis

    CERN Document Server

    Bell, Michael

    2010-01-01

    Learn the essential tools for developing a sound service-oriented architecture. SOA Modeling Patterns for Service-Oriented Discovery and Analysis introduces a universal, easy-to-use, and nimble SOA modeling language to facilitate the service identification and examination life cycle stage. This business and technological vocabulary will benefit your service development endeavors and foster organizational software asset reuse and consolidation, and reduction of expenditure. Whether you are a developer, business architect, technical architect, modeler, business analyst, team leader, or manager,

  19. Long Life Pavements; Firmes de larga duracion

    Energy Technology Data Exchange (ETDEWEB)

    Mateos Moreno, A.; Marron Fernandez, J. O.; Perez Ayuso, J.

    2009-07-01

    The existence of long-life pavements is not new; they have been built in Europe and the United States for decades. In fact, the concept arises from the observation of in-service roads; it was verified how particular pavements, initially designed for a 20-year service life, did not seem to have reduced the bearing capacity along the time, and its maintenance necessities had been exclusively focused on the wearing course. The base idea of long-life pavements is the existence of a fatigue threshold below which the damage produced by each load application is, in practice, zero or below the healing potential of the asphalt mix. The use practice of long-life pavements design considers a pavements constituted by three asphalt layers, each one with a very specific role: a wearing course that provides with the surface characteristics, an intermediate course that provides with most of the structural capacity and a base course that provides with the fatigue resistance. Furthermore, one of the particularities is the design against specific distress mechanisms. Maintenance strategy also presents specific particularities for long-life pavements. It is essentially focused on the detection of surface deterioration, and the appropriate and timely repair, before the damage extends beyond the wearing course, putting into risk the structural integrity of the pavement. Nowadays, this new way to conceive the design, the construction and the maintenance of road pavements, constitutes one of the main challenges for pavement engineering worldwide. (Author) 5 refs.

  20. Quality of College Life (QCL of Students: A Study among Tehran and Kurdestan College Students

    Directory of Open Access Journals (Sweden)

    Leila Falahati

    2013-12-01

    Full Text Available The main aim of present study was to examine the quality of college life (QCL based on the model developed by Sirgy et aI., (20] 0. The research design was correlational and the sample was comprises of 400 students from three universities including Tehran, Allameh and Kurdestan, which the respondents were selected using random sampling method. Quality of college life measurement was included three main subjects about college life as satisfaction with academic aspect, social aspect and facilities and services. In order to analysis the data structural equation modeling (SEM were employed. Findings indicated that the satisfaction with services and facilities has significant effect on satisfaction with academic and social aspects of college life. Moreover findings revealed that satisfaction with quality of college life has significant effect on satisfaction with overall life among students. Results indicated that the satisfaction with academic aspect and facilities and services among Tehran's university students is higher than Kurdestan's university students. Based on present findings the quality of universities may receive more attentions by higher education system especially in low income provinces such as Kurdestan. Lack of facilities resulted in decreasing the quality of academic aspect, social aspect and quality of college life. Low satisfaction with college life is leading to decreasing the overall life satisfaction which resulted in issues such as depression, frustration and anxiety among students.

  1. Narrative learning through life: Kenyan teachers' life-stories and narrative learning, and what this means for their relation to the teaching profession

    DEFF Research Database (Denmark)

    Dahl, Kari Kragh Blume

    2015-01-01

    This article explores four Kenyan primary school teachers’ life-stories and narrative learning through living and telling stories about their lives from 2000 to 2011, and what this means for their relation to the teaching profession. Evidence suggests that narrative learning manifests as altered...... professionalism ‘in’ and ‘through’ the stories teachers tell about their lives and depends on ruptures in lived life, followed by periods of transition in life-stories. Teachers also learned narratively by recounting their life-stories. Thus, narrative learning is an important learning site and a resource...... for professional development in addition to pre-service teacher education....

  2. Quality of life of depressed and suicidal patients seeking services from traditional and faith healers in rural Kenya.

    Science.gov (United States)

    Musyimi, Christine W; Mutiso, Victoria N; Nayak, Sameera S; Ndetei, David M; Henderson, David C; Bunders, Joske

    2017-05-08

    In rural Kenya, traditional and faith healers provide an alternative pathway to health care, including mental health care. However, not much is known about the characteristics of the populations they serve. The purpose of this study was to determine the relationship between depression, suicidal ideation, and socio-demographic variables with Quality of Life (QoL) indicators in a sample seeking mental health services from traditional and faith healers in rural Kenya. Understanding QoL in this sample can help develop mental health policy and training to improve the well-being of this population. This was a cross-sectional epidemiological survey (n = 443) conducted over a period of 3 months among adult patients seeking care from traditional and faith healers in rural Kenya. Data were collected using the Beck Depression Inventory II (BDI-II), Beck Scale for Suicide Ideation (BSS) and WHO Quality of Life Survey- BREF (WHOQOL-BREF), and analyzed using correlation analyses, parametric tests, and regression analyses. Increasing levels of depression were associated with lower QoL among patients seeking care from traditional and faith healers. BSS scores were significantly negatively correlated with overall, physical, psychological, and environmental QoL, p Kenya. Evidence suggests that traditional and faith healers treat patients with a variety of QoL issues. Further research should focus on understanding how these issues tie into QoL, and how these healers can target these to improve care.

  3. Application of annealing for WWER vessels life extension

    International Nuclear Information System (INIS)

    Badanin, V.I.; Gorynin, I.V.; Nickolaev, V.A.; Dragunov, Y.G.; Fedorov, V.G.

    1989-01-01

    Safe operation of NPP is greatly dependent on the guarantee of reactor vessel brittle failure strength with account for the effect of radiation embrittlement of vessel material. Recovery of irradiated material properties is principally important way to extend radiation life of reactor vessel. The aim of this report is to demonstrate the efficiency of annealing for recovery of vessel material properties and extension of its service-life

  4. Establishing community partnerships to support late-life anxiety research: lessons learned from the Calmer Life project.

    Science.gov (United States)

    Jameson, John Paul; Shrestha, Srijana; Escamilla, Monica; Clark, Sharonda; Wilson, Nancy; Kunik, Mark; Zeno, Darrell; Harris, Toi B; Peters, Alice; Varner, Ivory L; Scantlebury, Carolyn; Scott-Gurnell, Kathy; Stanley, Melinda

    2012-01-01

    This article outlines the development of the Calmer Life project, a partnership established between researchers and faith-based and social service organizations to examine the effectiveness of cognitive behavioral therapy (CBT) incorporating religious/spiritual components for older African Americans in low-income communities. The program was designed to bypass several barriers to delivery of CBT within the specified community; it allows multimodal delivery (in person or by telephone) that occurs outside traditional mental health settings through faith-based organizations and neighborhood community centers. It includes religion/spirituality as an element, dependent upon the preference of the participant, and is modular, so that people can select the skills they wish to learn. Established relationships within the community were built upon, and initial meetings were held in community settings, allowing feedback from community organizations. This ongoing program is functioning successfully and has strengthened relationships with community partners and facilitated increased availability of education and services in the community. The lessons learned in establishing these partnerships are outlined. The growth of effectiveness research for late-life anxiety treatments in underserved minority populations requires development of functional partnerships between academic institutions and community stakeholders, along with treatment modifications to effectively address barriers faced by these consumers. The Calmer Life project may serve as a model.

  5. Online information services in the social sciences

    CERN Document Server

    Jacobs, Neil

    2004-01-01

    Information professionals are increasingly responsible not only for running traditional information and library services but also for providing an online presence for their organisation. This book shows how best practice in delivering online information services should be based on actual user needs and behaviour. A series of case studies provide real life examples of how social science information is being used in the community. The book then draws on these case studies to outline the main issues facing service providers: such as usability, metadata and management. The book concludes with a lo

  6. Life cycle characteristics of SME’s

    NARCIS (Netherlands)

    Masurel, E.; Montfort, van K.

    2006-01-01

    Our study of professional services firms clearly revealed that firms change over the course of their life cycles. During the first three stages, diversification in sales, the differentiation in labor force, and the level of labor productivity increase. In the last stage, diversification in sales,

  7. Creating Hope for Life-Sentenced Offenders

    Science.gov (United States)

    Ruddell, Rick; Broom, Ian; Young, Matthew

    2010-01-01

    Offenders sentenced to terms of life imprisonment pose special challenges for correctional systems. The Correctional Service of Canada collaborated with nongovernmental agencies to develop programmatic interventions to better prepare this population to survive their prison sentences and transition to the community. This study describes the…

  8. Writing a Professional Life on Facebook

    Science.gov (United States)

    Briggs, Timothy J.

    2013-01-01

    This video presents one academic's experiences using Facebook in service of his professional life in order to contend that Facebook can be valuable to faculty as both a site for professional conversations and a social network that enables users to create and maintain social capital.

  9. Life extension decision making of safety critical systems: An overview

    OpenAIRE

    Shafiee, Mahmood; Animah, I.

    2017-01-01

    In recent years, the concept of “asset life extension” has become increasingly important to safety critical industries including nuclear power, offshore oil and gas, petrochemical, renewable energy, rail transport, aviation, shipping, electricity distribution and transmission, etc. Extending the service life of industrial assets can offer a broad range of economic, technical, social and environmental benefits as compared to other end-of-life management strategies such as decommissioning and r...

  10. Integrated design strategy for product life-cycle management

    Science.gov (United States)

    Johnson, G. Patrick

    2001-02-01

    Two major trends suggest new considerations for environmentally conscious manufacturing (ECM) -- the continuation of dematerialization and the growing trend toward goods becoming services. A diversity of existing research could be integrated around those trends in ways that can enhance ECM. Major research-based achievements in information, computation, and communications systems, sophisticated and inexpensive sensing capabilities, highly automated and precise manufacturing technologies, and new materials continue to drive the phenomenon of dematerialization - the reduction of the material and energy content of per capita GDP. Knowledge is also growing about the sociology, economics, mathematics, management and organization of complex socio-economic systems. And that has driven a trend towards goods evolving into services. But even with these significant trends, the value of material, energy, information and human resources incorporated into the manufacture, use and disposal of modern products and services often far exceeds the benefits realized. Multi-disciplinary research integrating these drivers with advances in ECM concepts could be the basis for a new strategy of production. It is argued that a strategy of integrating information resources with physical and human resources over product life cycles, together with considering products as streams of service over time, could lead to significant economic payoff. That strategy leads to an overall design concept to minimize costs of all resources over the product life cycle to more fully capture benefits of all resources incorporated into modern products. It is possible by including life cycle monitoring, periodic component replacement, re-manufacture, salvage and human factor skill enhancement into initial design.

  11. Stress-life interrelationships associated with alkaline fuel cells

    Science.gov (United States)

    Thaller, Lawrence H.; Martin, Ronald E.; Stedman, James K.

    1987-01-01

    A review is presented concerning the interrelationships between applied stress and the expected service life of alkaline fuel cells. Only the physical, chemical, and electrochemical phenomena that take place within the fuel cell stack portion of an overall fuel cell system will be discussed. A brief review will be given covering the significant improvements in performance and life over the past two decades as well as summarizing the more recent advances in understanding which can be used to predict the performance and life characteristics of fuel cell systems that have yet to be built.

  12. 7 CFR 15a.39 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Health and insurance benefits and services. 15a.39... Programs and Activities Prohibited § 15a.39 Health and insurance benefits and services. In providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a...

  13. Information system quality in work-life balance

    Directory of Open Access Journals (Sweden)

    Sharmini Gopinathan

    2016-06-01

    Full Text Available This paper aims to look for the role information systems quality may play in work-life balance among Malaysian ICT employees. The results of this study will be useful in the development of new tools and technologies that are focused on ISQ dimensions primarily information system quality which can be helpful to devise suggestions to the ICT sector on matters pertaining to sustainable development/policy formulation with reference to achieving a good work-life balance. A total of 79 respondents’ views were analyzed using Partial Least Square (PLS to obtain the final results. The results showed that information quality and system quality has strong effect on work-life balance as compared to service quality which showed no relation to work-life balance.

  14. Inservice inspection of heavy water plants - a tool in assessing damage to components and life extension

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Bhattacharys, D.K.; Baldev Raj

    1994-01-01

    Any system and its components are expected to give trouble free service over a certain period of time known as life time. The life time is estimated during the design stage. To achieve the design life, certain level of quality are to be defined and this quality has to be worked into the components by proper fabrication processes and their compliance with quality are to be checked. In addition, one has to guard against initiation or propagation of defects which may occur due to normal and abnormal service conditions. Non-destructive test (NDT) techniques are widely used for finding the health of the component. The role of NDT extends from the production stage to the entire life period of the system. This paper highlights the periodic in-service inspection (ISI) carried out on various components of the Heavy Water Plants (HWP) in India in assessing the integrity of the components and predicting the life of the components. (author). 3 refs., 4 figs

  15. review on hardfacing as method of improving the service life

    African Journals Online (AJOL)

    eobe

    soft base metal surface to enhance resistance to different wear mechanisms. .... shape and distribution of primary and eutectic carbides ... C-Si-Mn-B electrode resulted in an average hardness of ... blade material .... This consists of weld beads that run parallel to each ..... [54] Wallin, J. “Five basic steps to extend the life of.

  16. Techno-Economic Analysis of BEV Service Providers Offering Battery Swapping Services

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, J. S.; Pesaran, A.

    2013-01-01

    Battery electric vehicles (BEVs) offer the potential to reduce both oil imports and greenhouse gas emissions, but high upfront costs, battery-limited vehicle range, and concern over high battery replacement costs may discourage potential buyers. A subscription model in which a service provider owns the battery and supplies access to battery swapping infrastructure could reduce upfront and replacement costs for batteries with a predictable monthly fee, while expanding BEV range. Assessing the costs and benefits of such a proposal are complicated by many factors, including customer drive patterns, the amount of required infrastructure, battery life, etc. The National Renewable Energy Laboratory has applied its Battery Ownership Model to compare the economics and utility of BEV battery swapping service plan options to more traditional direct ownership options. Our evaluation process followed four steps: (1) identifying drive patterns best suited to battery swapping service plans, (2) modeling service usage statistics for the selected drive patterns, (3) calculating the cost-of-service plan options, and (4) evaluating the economics of individual drivers under realistically priced service plans. A service plan option can be more cost-effective than direct ownership for drivers who wish to operate a BEV as their primary vehicle where alternative options for travel beyond the single-charge range are expensive, and a full-coverage-yet-cost-effective regional infrastructure network can be deployed. However, when assumed cost of gasoline, tax structure, and absence of purchase incentives are factored in, our calculations show the service plan BEV is rarely more cost-effective than direct ownership of a conventional vehicle.

  17. Satisfaction with Life Amongst the Urban Poor: Empirical Results from South Africa

    Directory of Open Access Journals (Sweden)

    Chengedzai Mafini

    2016-10-01

    Full Text Available Satisfaction with life is a dynamic factor which merits ongoing research takes into consideration all contextual influences. This study assessed the influence of four economic factors, namely employment status, rural/urban residence, public service delivery and poverty on satisfaction with life amongst the urban poor in South Africa. Although satisfaction with life is a well-research concept in most environments, no consensus exists on the results, which prompts the need for continuous research. A survey design was adopted involving 402 purposively selected residents of Sebokeng Township in Gauteng Province. Regression analysis revealed that employment status, public service delivery and poverty significantly predicted satisfaction with life. Residing in the rural areas was statistically insignificant. The study provides current insights on the association between economic factors and satisfaction with life amongst poor people in urban societies. The study may be used by governments in developing countries to develop policies for improving the socio-economic well-being of poor societies.

  18. Long term warranty and after sales service concept, policies and cost models

    CERN Document Server

    Rahman, Anisur

    2015-01-01

    This volume presents concepts, policies and cost models for various long-term warranty and maintenance contracts. It offers several numerical examples for estimating costs to both the manufacturer and consumer. Long-term warranties and maintenance contracts are becoming increasingly popular, as these types of aftersales services provide assurance to consumers that they can enjoy long, reliable service, and protect them from defects and the potentially high costs of repairs. Studying long-term warranty and service contracts is important to manufacturers and consumers alike, as offering long-term warranty and maintenance contracts produce additional costs for manufacturers / service providers over the product’s service life. These costs must be factored into the price, or the manufacturer / dealer will incur losses instead of making a profit. On the other hand, the buyer / consumer needs to weigh the cost of maintaining it over its service life and to decide whether or not these policies are worth purchasing....

  19. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald; Matzen, Detlef; McAloone, Tim C.

    2010-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer- and product life cycleactivities . Literature offers a range of service-oriented design strategies from product-oriented DfX approaches to more customer...... manufacturing companies may align their product and service development activities with their business strategies.......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to improve understanding of how...

  20. Patients' perceptions of services and preferences for care in amyotrophic lateral sclerosis: A review.

    LENUS (Irish Health Repository)

    Foley, Geraldine

    2012-02-01

    Abstract Service providers and service users often have different perspectives on health and social care services. We have undertaken a systematic review of empirical data between 1988 and March 2011 relating to ALS service users\\' perspectives on health and social care services. Forty-seven texts were extracted and a narrative synthesis conducted. Few studies have explored ALS patients\\' experiences in relation to their satisfaction with services. Our review showed that ALS patients expect dignified care but they are often dissatisfied with health care services and have unmet expectations of their care. Most studies of decision-making and preferences for care have focused on end-of-life intervention. Various factors influence preferences for care from the service user perspective and people with ALS may adjust their use of services as they negotiate change. In conclusion, further research on the timeliness of services to meet changing needs of service users is required. The service user experience of allied health care services prior to end-of-life care also warrants investigation. Service providers need to support people with ALS as they negotiate feelings of acceptance and independence. Research to identify the key parameters of the ALS patient experience of services is required.

  1. Integrated plant life management (PLiM)-the IAEA contribution

    International Nuclear Information System (INIS)

    Kang, K.-S.; Clark, C.R.; Omoto, A.; )

    2005-01-01

    For the past couple of decades there has been a change of emphasis in the world nuclear power from that of building new Nuclear Power Plants (NPP) to that of taking measures to optimize the life cycle of operational plants. National approaches in many countries showed an increase of interest in Plant Life Management (PLiM), both in terms of plant service life assurance and in optimizing the service or operational life of NPP. A strong convergence of views is emerging from different National approaches, particularly in the area of the economic aspects of NPP operation and in the evolution in the scope of NPP PLIM. The latter can directly affect the cost of electricity from NPP in an increasingly competitive environment. The safety considerations of a NPP are paramount and those requirements have to be met to obtain and to extend/renew the operating license. To achieve the goal of the long term safe, economic and reliable operation of the plant an integrated Plant Life Management Programme (PLiM) is necessary. Some countries already have advanced PLiM Programmes while others still have none. The PLiM objective is to identify all that factors and requirements for the overall plant life cycle. The optimization of these requirements would allow for the minimum period of the investment return and maximum of the revenue from the sell of the produced electricity. Recognizing the importance of this issue and in response to the requests of the Member States the IAEA Division of Nuclear Power implements the Sub-programme on 'Engineering and Management Support for Competitive Nuclear Power'. Four projects within this sub-programme deal with different aspects of the NPP life cycle management with the aim to increase the capabilities of interested Member States in implementing and maintenance of the competitive and sustainable nuclear power. Although all four projects contain certain issues of PLiM there is one specific project on guidance on engineering and management practices

  2. Epidemiology of Pediatric Prehospital Basic Life Support Care in the United States.

    Science.gov (United States)

    Diggs, Leigh Ann; Sheth-Chandra, Manasi; De Leo, Gianluca

    2016-01-01

    Children have unique medical needs compared to adults. Emergency medical services personnel need proper equipment and training to care for children. The purpose of this study is to characterize emergency medical services pediatric basic life support to help better understand the needs of children transported by ambulance. Pediatric basic life support patients were identified in this retrospective descriptive study. Descriptive statistics were used to examine incident location, possible injury, cardiac arrest, resuscitation attempted, chief complaint, primary symptom, provider's primary impression, cause of injury, and procedures performed during pediatric basic life support calls using the largest aggregate of emergency medical services data available, the 2013 National Emergency Medical Services Information System (NEMSIS) Public Release Research Data Set. Pediatric calls represented 7.4% of emergency medical services activations. Most pediatric patients were male (49.8%), White (40.0%), and of non-Hispanic origin (56.5%). Most incidents occurred in the home. Injury, cardiac arrest, and resuscitation attempts were highest in the 15 to 19 year old age group. Global complaints (37.1%) predominated by anatomic location and musculoskeletal complaints (26.9%) by organ system. The most common primary symptom was pain (30.3%) followed by mental/psychiatric (13.4%). Provider's top primary impression was traumatic injury (35.7%). The most common cause of injury was motor vehicle accident (32.3%). The most common procedure performed was patient assessment (27.4%). Median EMS system response time was 7 minutes (IQR: 5-12). Median EMS scene time was 12 minutes (IQR: 8-19). Median transport time was 14 minutes (IQR: 8-24). Median EMS total call time was 51 minutes (IQR: 33-77). The epidemiology of pediatric basic life support can help to guide efforts in both emergency medical services operations and training.

  3. Homeless Aging Veterans in Transition: A Life-Span Perspective

    Directory of Open Access Journals (Sweden)

    Carla J. Thompson

    2013-01-01

    Full Text Available The need for counseling and career/educational services for homeless veterans has captured political and economic venues for more than 25 years. Veterans are three times more likely to become homeless than the general population if veterans live in poverty or are minority veterans. This mixed methods study emphasized a life-span perspective approach for exploring factors influencing normative aging and life-quality of 39 homeless veterans in Alabama and Florida. Seven descriptive quantitative and qualitative research questions framed the investigation. Study participants completed a quantitative survey reflecting their preferences and needs with a subset of the sample (N=12 also participating in individual qualitative interview sessions. Thirty-two service providers and stakeholders completed quantitative surveys. Empirical and qualitative data with appropriate triangulation procedures provided interpretive information relative to a life-span development perspective. Study findings provide evidence of the need for future research efforts to address strategies that focus on the health and economic challenges of veterans before they are threatened with the possibility of homelessness. Implications of the study findings provide important information associated with the premise that human development occurs throughout life with specific characteristics influencing the individual’s passage. Implications for aging/homelessness research are grounded in late-life transitioning and human development intervention considerations.

  4. Life extension of semi-submersible drilling unit

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, I.; Sinclair, C.I.K. [TWI, Cambridge (United Kingdom). Structural Integrity Dept.; Magne, E. [Schlumberger Sedco Forex, Montrouge (France)

    1995-12-31

    This paper describes the life extension of a semi-submersible drilling rig built in the early 1970`s. A nominal design life of 20 years was estimated at the time of building; however, in the interim period, numerous improvements have been made in fatigue life estimation ad life improvement techniques, raising the possibility that a further 20 years of operation could be considered. The life extension strategy made use of a number of aspects of offshore technology which were not available at the time of construction of the rig. Finite element studies and results from offshore research programs were used to gauge the effect of fatigue life improvement techniques. The program demonstrated the feasibility of extending the operation of the rig for a further 20 years, with the interval between in-service inspection increased to every five years. It also provided a valuable database of fracture toughness data for the rig materials, which may be used in future work to address reliability issues.

  5. Using digital tech to improve life for refugees | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-12-20

    Dec 20, 2016 ... Using digital tech to improve life for refugees ... and netbooks - can help to close the access and quality-of-service gaps for Palestinians ... individuals to enjoy more accessible and better quality health care on a continuous basis. ... health challenges by bringing life-saving information to those most in need.

  6. Estimation of Corrosion-Free Life for Concrete Containing Ground Granulated Blast-Furnace Slag under a Chloride-Bearing Environment

    Directory of Open Access Journals (Sweden)

    Sung In Hong

    2017-01-01

    Full Text Available The rate of chloride transport by diffusion in concrete containing ground granulated blast-furnace slag (GGBS was mathematically estimated to predict the corrosion-free service life of concrete structures exposed to seawater environment. As a factor to corrosiveness of steel embedment, replacement ratio of GGBS was selected, accounting for 25 and 50% to total binder. As a result, it was found that an increase in the GGBS content resulted in an increase in the chloride binding capacity, which would give rise to a lower chloride diffusion rate, thereby reducing the risk of chloride-induced corrosion. When it comes to the sensitivity of parameters to service life, the effective diffusivity showed a marginal influence on serviceability, irrespective of GGBS contents while surface chloride content and critical threshold concentration revealed more crucial factors to long term chloride diffusion. As the GGBS replacement increased, the variation in service life has become less influential with changing parameters. Substantially, GGBS concrete at high replacement ratio enhanced the service life due to a combination of dense pore structure and enhanced chloride binding capacity.

  7. Biofouling of power-plant service systems by Corbicula

    International Nuclear Information System (INIS)

    Page, T.L.; Neitzel, D.A.; Simmons, M.A.; Hayes, P.F.

    1983-08-01

    Corbicula sp. foul the service water systems at nuclear power plants because the environment within these systems is compatible with the ecological requirements of the species. To reduce Corbicula fouling, components of service water systems and operating procedures that enhance the potential for fouling need to be identified. Factors important in mediating biofouling of service water systems appear to be screening potential, minimum and maximum velocities and the operational procedures employed during power plant biofoulant control and downtime. These conclusions are based on the results of a categorical model we used to correlate information from power plants with that on Corbicula life history. Power plant parameters in the model include temperature, dissolved oxygen concentration, screen and strainer size, maximum and minimum velocities, and elements of the biofouling control procedures. Parameters for Corbicula include tolerances to temperature, dissolved oxygen, biofouling control chemicals, velocity preferences, and optimal temperatures for each life stage and behavior. 13 references, 5 figures

  8. Craft qualities translated from traditional crafts to smart textile services

    NARCIS (Netherlands)

    Kuusk, K.; Wensveen, S.A.G.; Tomico Plasencia, O.

    2016-01-01

    In this article we suggest craft and craftsmanship as an inspiration to design more sustainable smart textile services. We look into the opportunities that interactive properties and services bring into the textile and garment life cycle. We use traditional crafts as a source of inspiration for the

  9. Integrated NPP life cycle management - Agency's approach

    International Nuclear Information System (INIS)

    Gueorguiev, B.

    2002-01-01

    administrative - managerial or/and social - political activities aimed at the achievement of an optimised long term save and reliable operation of the plant including its decommissioning. Optimisation of the plant operational life is the most economical option equivalent to providing additional generating capacity. In its turn optimisation of operational or service life means extension of the operational license to the extent possible having in mind that the plant performance continues to maintain its safety and competitiveness on the market. To meet these requirements the need for an integrated NPP life management approach is becoming more and more evident. The IAEA in response to the needs of the Member states is implementing several programmes including the project on engineering and management practices for optimisation of nuclear power plant service life including decommissioning. The Project scope includes different possible modes of IAEA operations for the purposes of information exchange and technology transfer. It means arrangements for technical, advisory and consultant group meetings, development of databases and guidance documents on proven practices, co-ordinated research projects, technical co-operation projects, expert services, training activities, co-operation with other International organizations and some others. A number of issues are under consideration. They include economic analysis and considerations related to decision on continued operation versus decommissioning, optimisation of operation/maintenance/In-service inspection regimes to facilitate life management programmes, aging management and mitigation measures with regard to control and instrumentation, primary and secondary circuit equipment integrity, assessment of structural materials, creation and development of supporting databases, preservation of knowledge including aspects of training and qualification of NPP personnel, work force aging, pre-shut down and decommissioning activities

  10. FUNDAMENTALS OF LIFE CYCLE ASSESSMENT AND OFF-THE-SHELF SOFTWARE DEMONSTRATION

    Science.gov (United States)

    As the name implies, Life Cycle Assesssment (LCA) evaluates the entire life cycle of a product, process, activity, or service, not just simple economics at the time of delivery. This course on LCA covers the following issues:Basic principles of LCA for use in producing, des...

  11. What is 5G? Emerging 5G Mobile Services and Network Requirements

    OpenAIRE

    Heejung Yu; Howon Lee; Hongbeom Jeon

    2017-01-01

    In this paper, emerging 5G mobile services are investigated and categorized from the perspective of not service providers, but end-users. The development of 5G mobile services is based on an intensive analysis of the global trends in mobile services. Additionally, several indispensable service requirements, essential for realizing service scenarios presented, are described. To illustrate the changes in societies and in daily life in the 5G era, five megatrends, including the explosion of mobi...

  12. LIVIVO - the Vertical Search Engine for Life Sciences.

    Science.gov (United States)

    Müller, Bernd; Poley, Christoph; Pössel, Jana; Hagelstein, Alexandra; Gübitz, Thomas

    2017-01-01

    The explosive growth of literature and data in the life sciences challenges researchers to keep track of current advancements in their disciplines. Novel approaches in the life science like the One Health paradigm require integrated methodologies in order to link and connect heterogeneous information from databases and literature resources. Current publications in the life sciences are increasingly characterized by the employment of trans-disciplinary methodologies comprising molecular and cell biology, genetics, genomic, epigenomic, transcriptional and proteomic high throughput technologies with data from humans, plants, and animals. The literature search engine LIVIVO empowers retrieval functionality by incorporating various literature resources from medicine, health, environment, agriculture and nutrition. LIVIVO is developed in-house by ZB MED - Information Centre for Life Sciences. It provides a user-friendly and usability-tested search interface with a corpus of 55 Million citations derived from 50 databases. Standardized application programming interfaces are available for data export and high throughput retrieval. The search functions allow for semantic retrieval with filtering options based on life science entities. The service oriented architecture of LIVIVO uses four different implementation layers to deliver search services. A Knowledge Environment is developed by ZB MED to deal with the heterogeneity of data as an integrative approach to model, store, and link semantic concepts within literature resources and databases. Future work will focus on the exploitation of life science ontologies and on the employment of NLP technologies in order to improve query expansion, filters in faceted search, and concept based relevancy rankings in LIVIVO.

  13. A case of industrial safety appraisal for extension of service life of GTK-10-4 gas turbines used at gas transmission stations

    Science.gov (United States)

    Rybnikov, A. I.; Kovalev, A. G.; Kryukov, I. I.; Leont'ev, S. A.; Moshnikov, A. V.

    2017-04-01

    It is shown that the extended life and enhanced operational reliability of parts and subassemblies of the most popular GTK-10-4 gas transmission plants are determined by the enhanced efficiency of the control over technical condition and operational safety of turbine plants in conformity with industrial safety requirements imposed on gas pipeline compressor stations. It has been established that the materials of parts and subassemblies of gas turbine plants with different, especially with maximal operating time, shall be exposed to NDT for the purpose of determining the actual mechanical characteristics of these materials with different operating time and calculating residual life. The analysis of damageability and operating conditions has helped to identify parts and subassemblies for repair or replacement with the highest frequency of unacceptable defects. These parts and subassemblies have been shown to include base members of the axial compressor (AC), a turbine housing, an axial compressor rotor, high- and low-pressure turbine (HPT and LPT) discs, a 12-part holder, the housing of the holder of HPT and LPT guiding blades, a sealed baffler, and working and guiding AC, LPT and HPT blades. The most typical operational defects have been enumerated and analyzed. It has been determined that the primary task of the industrial safety appraisal for extending the life of GTK-10-4 with limit-exceeding operating time is to thoroughly examine HPT and LPT discs with more than 130,000 hours of operating time and establish by DT methods characteristics of materials for evaluation, taking account of their degradation, and residual life of critical turbine elements. In addition, it has been shown that the service life of HP turbine discs can be extended by replacing the disc material (EP-428 12% chromium steel) with a material with a higher linear expansion factor that somewhat exceeds the expansion factor of EI-893 nickel alloy used to melt out working blades.

  14. End of life care in chronic obstructive pulmonary disease: in search of a good death

    Directory of Open Access Journals (Sweden)

    Anna Spathis

    2008-03-01

    Full Text Available Anna Spathis, Sara BoothPalliative Care Service, Cambridge University Hospitals NHS Foundation Trust, Cambridge, England, UKAbstract: Chronic obstructive pulmonary disease (COPD is an incurable, progressive illness that is the fourth commonest cause of death worldwide. Death tends to occur after a prolonged functional decline associated with uncontrolled symptoms, emotional distress and social isolation. There is increasing evidence that the end of life needs of those with advanced COPD are not being met by existing services. Many barriers hinder the provision of good end of life care in COPD, including the inherent difficulties in determining prognosis. This review provides an evidence-based approach to overcoming these barriers, summarising current evidence and highlighting areas for future research. Topics include end of life needs, symptom control, advance care planning, and service development to improve the quality of end of life care.Keywords: chronic obstructive pulmonary disease (MeSH, palliative care (MeSH, dyspnoea (MeSH, advance care planning (MeSH

  15. System, structure, and component evaluation for life-cycle management

    International Nuclear Information System (INIS)

    Hanley, N.E.; Banerjee, A.K.; Woods, P.B.; Perrin, J.S.; Marian, F.A.

    1992-01-01

    In recent years, many nuclear organizations and utilities have studied the possibility of extending the service life of nuclear power plants beyond the original license period. From these studies, recommendations have resulted for maintaining the option of future decisions concerning operating license renewal. Several of the recommendations are considered beneficial to the management and operation of nuclear plants in meeting many of their near-term goals. In 1986, Public Service Electric and Gas (PSE and G) concluded that a full-scale nuclear plant license renewal program for their Salem 1 and 2 and Hope Creek nuclear stations was not cost-effective at that time. Rather, it would be better served if the nuclear plant life extension (PLEX) option were maintained for future consideration. To help plan for the life extension option, a strategic 5-yr life cycle management (LCM) program was begun. In support of the LCM program, evaluations for the following Salem structures and components were performed: (1) intake structures, (2) reactor vessel support, (3) containment liner, and (4) containment structure (below grade). This paper discusses the systems, structures, and components (SSC) evaluation methodology and, as an example, discusses the evaluation performed for reactor vessel support

  16. Exploring Civic Practices and Service Learning through School-Wide Recycling

    Science.gov (United States)

    Chessin, Debby; Moore, Virginia J.; Theobald, Becky

    2011-01-01

    Young children can make real-life connections to the ideals, principles, and practices of citizenship through Service Learning, a teaching pedagogy and philosophy that addresses real community needs while fulfilling academic goals that meet specific national and state curricula and standards. Authentic and effective service learning projects offer…

  17. Equilibrium moisture content of wood at different temperature/moisture conditions in the cladding of wooden constructions and in the relation to their reliability and service life

    OpenAIRE

    Zdeňka Havířová; Pavel Kubů

    2010-01-01

    One of the natural properties of wood and wood-based materials is their soaking capacity (hy­gro­sco­pi­ci­ty). The moisture content of wood and building constructions of wood and wood based materials significantly influences the service life and reliability of these constructions and buildings. The equilibrium weight moisture content of built-in wood corresponding to temperature/moisture conditions inside the cladding has therefore a decisive influence on the basic requirements placed on bui...

  18. Student teachers' views: what is an interesting life sciences curriculum?

    OpenAIRE

    Rian de Villiers

    2011-01-01

    In South Africa, the Grade 12 'classes of 2008 and 2009' were the first to write examinations under the revised Life Sciences (Biology) curriculum which focuses on outcomes-based education (OBE). This paper presents an exploration of what students (as learners) considered to be difficult and interesting in Grades 10-12 Life Sciences curricula in the Further Education and Training (FET) phase. A sample of 125 first year, pre-service Life Sciences and Natural Sciences teachers from a university...

  19. Mediation analysis of severity of needs, service performance and outcomes for patients with mental disorders.

    Science.gov (United States)

    Roux, Paul; Passerieux, Christine; Fleury, Marie-Josée

    2016-12-01

    Needs and service performance assessment are key components in improving recovery among individuals with mental disorders. To test the role of service performance as a mediating factor between severity of patients' needs and outcomes. A total of 339 adults with mental disorders were interviewed. A mediation analysis between severity of needs, service performance (adequacy of help, continuity of care and recovery orientation of services) and outcomes (personal recovery and quality of life) was carried out using structural equation modelling. The structural equation model provided a good fit with the data. An increase in needs was associated with lower service performance and worse outcomes, whereas higher service performance was associated with better outcomes. Service performance partially mediated the effect of patient needs on outcomes. Poorer service performance has a negative impact on outcomes for patients with the highest needs. Ensuring more efficient services for patients with high needs may help improve their recovery and quality of life. © The Royal College of Psychiatrists 2016.

  20. Incorporating individualized quality of life measures in the evaluation of pharmacy services: the IN*COMPASS framework.

    Science.gov (United States)

    Funderburk, F R; Pathak, D S; Pleil, A M

    1998-01-01

    Quality of life is a fascinating field to researchers and practitioners alike. To some researchers, quality of life is of interest because it offers untold challenges in constructing instruments and capturing data necessary to answer key questions about health, disease, and treatment. For such researchers, quality of life is about statistical relationships among questions and about using questions to define the physical, social, and emotional domains of health. To other researchers, this field is about finding practical applications in policy and treatment decision making for the information provided by quality of life assessments. To these researchers, the focus of quality of life is on ways to apply knowledge of quality of life differences between groups with and without specific diseases or ways to use knowledge about how treatments affect the quality of life of various patient populations. To practitioners, quality of life is about treatment outcomes that impact individual patients' daily lives. It is the practitioner that Funderburk, Pleil, and Pathak are considering in their paper in this issue of Pharmacy Practice Management Quarterly. These authors give several important messages to practitioners seeking to serve their patients by incorporating quality of life into their practices. The key message in the paper is that to better understand and determine the impact of treatment on a patient's quality of life, it is critical to start with a baseline or reference point relevant to that patient. From that baseline or reference point, treatment decisions can be made and progress, in quality of life terms, can be evaluated. Critical questions in their framework, which is called the IN*COMPASS (Individualized Client Oriented Method for Preferred Alleviation of Sickness States) Approach, are "How are you now?" and "How would you like to be?" The authors do not endorse particular quality of life tools in their approach; rather they prescribe certain critical

  1. Techno-Economic Analysis of BEV Service Providers Offering Battery Swapping Services: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, J.; Pesaran, A.

    2013-03-01

    Battery electric vehicles (BEVs) offer the potential to reduce both oil imports and greenhouse gas emissions, but high upfront costs, battery-limited vehicle range, and concern over high battery replacement costs may discourage potential buyers. A subscription model in which a service provider owns the battery and supplies access to battery swapping infrastructure could reduce upfront and replacement costs for batteries with a predictable monthly fee, while expanding BEV range. Assessing the costs and benefits of such a proposal are complicated by many factors, including customer drive patterns, the amount of required infrastructure, battery life, etc. The National Renewable Energy Laboratory has applied its Battery Ownership Model to compare the economics and utility of BEV battery swapping service plan options to more traditional direct ownership options. Our evaluation process followed four steps: (1) identifying drive patterns best suited to battery swapping service plans, (2) modeling service usage statistics for the selected drive patterns, (3) calculating the cost-of-service plan options, and (4) evaluating the economics of individual drivers under realistically priced service plans. A service plan option can be more cost-effective than direct ownership for drivers who wish to operate a BEV as their primary vehicle where alternative options for travel beyond the single-charge range are expensive, and a full-coverage-yet-cost-effective regional infrastructure network can be deployed. However, when assumed cost of gasoline, tax structure, and absence of purchase incentives are factored in, our calculations show the service plan BEV is rarely more cost-effective than direct ownership of a conventional vehicle.

  2. Commissioning of specialist palliative care services in England.

    Science.gov (United States)

    Lancaster, Harriet; Finlay, Ilora; Downman, Maxwell; Dumas, James

    2018-03-01

    Some failures in end-of-life care have been attributed to inconsistent provision of palliative care across England. We aimed to explore the variation in commissioning of services by Clinical Commissioning Groups (CCGs) using a data collection exercise. We sent a Freedom of Information request in the form of an open questionnaire to all 209 CCGs in England to assess their commissioning of palliative and end-of-life care services, mainly focused on the provision of specialist palliative care services. 29 CCGs provided information about the number of patients with some form of palliative care needs in their population. For specialist palliative care services, CCGs allocated budgets ranging from £51.83 to £2329.19 per patient per annum. 163 CCGs (77.90%) currently commission 7-day admission to their specialist palliative care beds. 82.84% of CCGs commission 7-day specialist palliative care services in patients' own homes and out-of-hours services rely heavily on hospice provision. 64 CCGs (31.37%) commission pain control teams, the majority of whom only operate in regular working hours. 68.14% of CCGs reported commissioning palliative care education of any sort for healthcare professionals and 44.85% of CCGs had no plans to update or review their palliative care services. The most important finding from this exercise is that the information CCGs hold about their population and services is not standardised. However, information based on data that are more objective, for example, population and total budget for palliative care, demonstrate wide variations in commissioning. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. A designated centre for people with disabilities operated by Brothers of Charity Services Galway - Galway

    LENUS (Irish Health Repository)

    Foley, Geraldine

    2012-02-01

    Abstract Service providers and service users often have different perspectives on health and social care services. We have undertaken a systematic review of empirical data between 1988 and March 2011 relating to ALS service users\\' perspectives on health and social care services. Forty-seven texts were extracted and a narrative synthesis conducted. Few studies have explored ALS patients\\' experiences in relation to their satisfaction with services. Our review showed that ALS patients expect dignified care but they are often dissatisfied with health care services and have unmet expectations of their care. Most studies of decision-making and preferences for care have focused on end-of-life intervention. Various factors influence preferences for care from the service user perspective and people with ALS may adjust their use of services as they negotiate change. In conclusion, further research on the timeliness of services to meet changing needs of service users is required. The service user experience of allied health care services prior to end-of-life care also warrants investigation. Service providers need to support people with ALS as they negotiate feelings of acceptance and independence. Research to identify the key parameters of the ALS patient experience of services is required.

  4. THE EFFICIENCY OF PROMOTIONAL INSTRUMENTS RELATED TO THE PRODUCT LIFE CYCLE STAGES

    Directory of Open Access Journals (Sweden)

    MIHAELA MARCU

    2010-01-01

    Full Text Available Regarded as a planning tool, PLC (product life cycle strongly contributes to the identification of the main marketing challenges that may arise throughout the life of a product/service. Thus, the marketing management has the opportunity to develop and implement those solutions designed to optimize each of the 4P of marketing mix: product (quality, price, distribution (placement and promotion. The communication program has an essential role, because the company presents through it its "product" to actual or potential customers in order to convince them of the benefits of purchasing/using it. The efficiency of the promotional instruments involves an appropriate allocation of funds needed to promote the product/service in relation to the stage of its life cycle.

  5. A study protocol for tracking quality of life among U.S. service members wounded in Iraq and Afghanistan: the Wounded Warrior Recovery Project.

    Science.gov (United States)

    Woodruff, Susan I; Galarneau, Michael R; Luu, Bethi N; Sack, Daniel; Han, Peggy

    2014-03-01

    There is a need for more work to understand the quality of life (QOL) outcomes of survivors of Operations Enduring Freedom and Iraqi Freedom combat injury to improve care and treatment, and prevent poor physical, psychological, and social outcomes. We describe the study design and methods of the Wounded Warrior Recovery Project, a study supported by the Department of Defense that will track close to 10,000 military personnel wounded in Operations Enduring Freedom and Iraqi Freedom. The overall objective of the 6-year longitudinal study is to track changes in QOL and describe variations in those changes as they relate to sociodemographic factors, injury characteristics, service-related factors, clinical/diagnostic measures including traumatic brain injury and posttraumatic stress disorder, and medical procedures and services. The Wounded Warrior Recovery Project study will be among the first longitudinal population-based investigations of QOL outcomes after combat injury and will provide a basis upon which large-scale epidemiological studies can be conducted. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

  6. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian; Matzen, Detlef; McAloone, Tim C.

    2009-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer activities and product life cycle considerations. Literature offers a range of serviceoriented design strategies from product-oriented DfX approaches to more customer......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to begin to understand how manufacturing...... companies may align their business strategies with their product and service development activities....

  7. Palliative and end-of-life care in South Dakota.

    Science.gov (United States)

    Minton, Mary E; Kerkvliet, Jennifer L; Mitchell, Amanda; Fahrenwald, Nancy L

    2014-05-01

    Geographical disparities play a significant role in palliative and end-of-life care access. This study assessed availability of palliative and end of life (hospice) care in South Dakota. Grounded in a conceptual model of advance care planning, this assessment explored whether South Dakota health care facilities had contact persons for palliative care, hospice services, and advance directives; health care providers with specialized training in palliative and hospice care; and a process for advance directives and advance care planning. Trained research assistants conducted a brief telephone survey. Of 668 health care eligible facilities, 455 completed the survey for a response rate of 68 percent (455 out of 668). Over one-half of facilities had no specific contact person for palliative care, hospice services and advance directives. Nursing homes reported the highest percentage of contacts for palliative care, hospice services and advance directives. Despite a lack of a specific contact person, nearly 75 percent of facilities reported having a process in place for addressing advance directives with patients; slightly over one-half (53 percent) reported having a process in place for advance care planning. Of participating facilities, 80 percent had no staff members with palliative care training, and 73 percent identified lack of staff members with end-of-life care training. Palliative care training was most commonly reported among hospice/home health facilities (45 percent). The results of this study demonstrate a clear need for a health care and allied health care workforce with specialized training in palliative and end-of-life care.

  8. Nuclear equipment recalsification based on the service experience

    International Nuclear Information System (INIS)

    Geambasu, A.; Segarceanu, D.

    2000-01-01

    The paper presents some considerations concerning the need of comparison between equipment performance proven by test and the service experience in Cernavoda Nuclear Plant. Service performance dana obtain partly from service failures (failures times) and partly from service experience without failure (running times) can be statistically analyzed to obtain predictions of the number of failures of unfailed units in specified period of time, means time to first failure, means time of median failure, a.s.o. These informations can be used during the operation of Nuclear Power Plant to estimate when a equipment should be replaced with a new one in order to prevent getting to the life end point. (author)

  9. Anaerobic co-digestion of municipal food waste and sewage sludge: A comparative life cycle assessment in the context of a waste service provision.

    Science.gov (United States)

    Edwards, Joel; Othman, Maazuza; Crossin, Enda; Burn, Stewart

    2017-01-01

    This study used life cycle assessment to evaluate the environmental impact of anaerobic co-digestion (AcoD) and compared it against the current waste management system in two case study areas. Results indicated AcoD to have less environmental impact for all categories modelled excluding human toxicity, despite the need to collect and pre-treat food waste separately. Uncertainty modelling confirmed that AcoD has a 100% likelihood of a smaller global warming potential, and for acidification, eutrophication and fossil fuel depletion AcoD carried a greater than 85% confidence of inducing a lesser impact than the current waste service. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  10. 44 CFR 19.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Health and insurance benefits... Education Programs or Activities Prohibited § 19.440 Health and insurance benefits and services. Subject to § 19.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or...

  11. The Implementation of Service-Learning in Graduate Instructional Design Coursework

    Science.gov (United States)

    Stefaniak, Jill E.

    2015-01-01

    This paper describes the design of service-learning experiences with a graduate-level instructional design course. Service-learning provides students with real-life experiences in a situated-learning environment. Students were tasked with working on an instructional design project in a real-world setting to gain consultative experience. This paper…

  12. Constituent attachment and voluntary turnover in low-wage/low-skill service work.

    Science.gov (United States)

    Ellingson, Jill E; Tews, Michael J; Dachner, Alison M

    2016-01-01

    This paper draws on life stage theory, ethnographic research conducted in the service sector, and evidence for secondary segmentation within the low-wage/low-skill labor force to offer evidence that social bond development with coworkers can help reduce the high rate of turnover observed in low-wage/low-skill service work. Contrary to the belief that these employees will leave before social ties can develop, constituent attachment was found to be the only significant predictor of turnover in 2 samples of front-line service workers in a casual dining, national restaurant chain after controlling for other aspects of work that can create a sense of attachment to a job, and other job attitudes, such as satisfaction and commitment. However, the effect was dependent on developmental life stage. Constituent attachment reduced turnover among workers classified as emerging adults, whereas constituent attachment did little to affect turnover among nonemerging adults. Implications of the results are discussed with respect to the value of considering segmentation in future research on turnover in the service sector and the use of life stage theory for understanding the leaving behavior of workers in different stages of adulthood. (c) 2016 APA, all rights reserved).

  13. Lifetime traumatic events, health-related quality of life, and satisfaction with life in older adults.

    Science.gov (United States)

    Lamoureux-Lamarche, Catherine; Vasiliadis, Helen-Maria

    2017-10-01

    The aims were to assess the association between lifetime traumatic events and post-traumatic stress syndrome (PTSS) and health-related quality of life (HRQOL) and satisfaction with life stratified by gender among a community-dwelling sample of older adults. Data used came from the ESA-Services study (2011-2013) and included a large convenience sample of 1811 older adults. Traumatic events were measured using a list of 14 events. PTSS was measured using the Impact of Event Scale-Revised. HRQOL and life satisfaction were measured with the EQ-5D-3L and the Satisfaction With Life Scale. Multivariate regression analyses were used to assess the association between traumatic events, PTSS, and quality of life. Respondents had a mean age of 73.90 years (SD: 6.13, range 65-97). Our results showed that exposure to violence (OR 4.88, CI 2.72-8.77), an accident (OR 2.33, CI 1.29-4.22), and sexual abuse (OR 2.26 CI 1.17-4.37) was associated with PTSS only in women. No traumatic event was associated only in men. The interaction between gender and exposure to violence and life-threatening disease of a close one was significant. Experiencing violence (β = -0.04, p life-threatening disease (β = -0.04, p life-threatening disease of a close one, sexual abuse, and other type of traumatic events. A life-threatening disease (β = -0.90, p life satisfaction only in men and the exposure of violence (β = -1.18, p life satisfaction in women. Our study could help healthcare professionals to identify and monitor traumatic events that are at higher risk to be associated with PTSS and a lower quality of life for older men and women.

  14. Life cycle management and assessment: approaches and visions towards sustainable manufacturing

    DEFF Research Database (Denmark)

    Westkämper, Engelbert; Alting, Leo; Arndt, Günther

    2001-01-01

    and optimizes the interaction of product design, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows....... Economically successful business areas can also be explored. Whether new service concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole...... the existing approaches of LCM and discusses their prospects and further development....

  15. Integrating mental health services: the Finnish experience

    Directory of Open Access Journals (Sweden)

    Ville Lehtinen

    2001-06-01

    Full Text Available The aim of this paper is to give a short description of the most important developments of mental health services in Finland during the 1990s, examine their influences on the organisation and provision of services, and describe shortly some national efforts to handle the new situation. The Finnish mental health service system experienced profound changes in the beginning of the 1990s. These included the integration of mental health services, being earlier under own separate administration, with other specialised health services, decentralisation of the financing of health services, and de-institutionalisation of the services. The same time Finland underwent the deepest economic recession in Western Europe, which resulted in cut-offs especially in the mental health budgets. Conducting extensive national research and development programmes in the field of mental health has been one typically Finnish way of supporting the mental health service development. The first of these national programmes was the Schizophrenia Project 1981–97, whose main aims were to decrease the incidence of new long-term patients and the prevalence of old long-stay patients by developing an integrated treatment model. The Suicide Prevention Project 1986–96 aimed at raising awareness of this special problem and decreasing by 20% the proportionally high suicide rate in Finland. The National Depression Programme 1994–98 focused at this clearly increasing public health concern by several research and development project targeted both to the general population and specifically to children, primary care and specialised services. The latest, still on-going Meaningful Life Programme 1998–2003 which main aim is, by multi-sectoral co-operation, to improve the quality of life for people suffering from or living with the threat of mental disorders. Furthermore, the government launched in 1999 a new Goal and Action Programme for Social Welfare and Health Care 2000–2003, in

  16. The Association between Freedom of Choice and Effectiveness of Home Care Services.

    Science.gov (United States)

    Steffansson, Marina; Pulliainen, Marjo; Kettunen, Aija; Linnosmaa, Ismo; Halonen, Miikka

    2016-03-31

    The aim of this paper is to study home care clients' freedom to choose their services, as well the association between the effectiveness of home care services and freedom of choice, among other factors. A structured postal survey was conducted among regular home care clients (n = 2096) aged 65 or older in three towns in Finland. Freedom of choice was studied based on clients' subjective experiences. The effectiveness of the services was evaluated by means of changes in the social-care-related quality of life. Regression analyses were used to test associations. As much as 62% of home care recipients reported having some choice regarding their services. Choosing meals and visiting times for the care worker were associated with better effectiveness. The basic model, which included needs and other factors expected to have an impact on quality of life, explained 15.4% of the changes in quality of life, while the extended model, which included the freedom-of-choice variables, explained 17.4%. The inclusion of freedom-of-choice variables increased the adjusted coefficient of determination by 2%. There was a significant positive association between freedom of choice and the effectiveness of public home care services. Freedom of choice does not exist for all clients of home care who desire it. By changing social welfare activities and structures, it is possible to show respect for clients' opinions and to thereby improve the effectiveness of home care services.

  17. Fatigue life prediction and strength degradation of wind turbine rotor blade composites

    NARCIS (Netherlands)

    Nijssen, R.P.L.

    2006-01-01

    Wind turbine rotor blades are subjected to a large number of highly variable loads, but life predictions are typically based on constant amplitude fatigue behaviour. Therefore, it is important to determine how service life under variable amplitude fatigue can be estimated from constant amplitude

  18. Experience of Control and Student Satisfaction with Higher Education Services

    Science.gov (United States)

    Lee, Jungki; Anantharaman, Sekhar

    2013-01-01

    Although the delivery of satisfactory services is an important strategic goal in many colleges, students are known to face challenges and experience a significant amount of stress during their school life. This study proposes and tests students' experience of control over their college life as a promising factor that would enhance their…

  19. Profile and Predictors of Service Needs for Families of Children with Autism Spectrum Disorders

    Science.gov (United States)

    Hodgetts, Sandra; Zwaigenbaum, Lonnie; Nicholas, David

    2015-01-01

    Purpose: Increasing demand for autism services is straining service systems. Tailoring services to best meet families' needs could improve their quality of life and decrease burden on the system. We explored overall, best, and worst met service needs, and predictors of those needs, for families of children with autism spectrum disorders. Methods:…

  20. Music in the Life Skills Classroom

    Science.gov (United States)

    van Vuuren, Eurika Jansen; van Niekerka, Caroline

    2015-01-01

    Generalist educators in South Africa shy away from music in the subjects Life Skills (Dance, Drama, Music, Visual Art, Physical Education and Personal and Social Well-being) and Creative Arts (Dance, Drama, Music, Visual Art) and universities are not delivering generalist students for the subject demands. In-service educators, as well as subject…

  1. Urban and rural factors associated with life satisfaction among older Chinese adults.

    Science.gov (United States)

    Li, Chengbo; Chi, Iris; Zhang, Xu; Cheng, Zhaowen; Zhang, Lei; Chen, Gong

    2015-01-01

    This study compared urban and rural factors associated with life satisfaction among older adults in mainland China. Study data were extracted at random from 10% of the Sample Survey on Aged Population in urban/rural China in 2006 for 1980 participants aged 60 and older, including 997 from urban cities and 983 from rural villages. In this study, 54.6% of urban older adults and 44.1% of rural older adults reported satisfaction with their lives. Binary logistic regression analysis showed that financial strain, depressive symptoms, filial piety, and accessibility of health services were significantly associated with life satisfaction for both urban and rural participants, but age and financial exchange with children were only associated with life satisfaction among urban older adults. Findings are consistent with some previous studies that indicated the importance of financial strain, depressive symptoms, filial piety, and accessibility of health services to life satisfaction among the older adults in both urban and rural areas. This study also demonstrated the importance of age and family financial exchange to the life satisfaction of urban older adults.

  2. Engineering support for plant life management: the IAEA contribution

    International Nuclear Information System (INIS)

    Kang, K.; Hezoucky, F.; Clark, R. C.; )

    2007-01-01

    For the past couple of decades there has been a change of emphasis in the world nuclear power from that of building new Nuclear Power Plants (NPP) to that of taking measures to optimize the life cycle of operational plants. National approaches in many countries showed an increase of interest in Plant Life Management (PLiM), both in terms of plant service life assurance and in optimizing the service or operational life of NPP. The safety considerations of a NPP are paramount and those requirements have to be met to obtain and to extend/renew the operating license. To achieve the goal of the long term safe, economic and reliable operation of the plant, PLiM programme is essential. Some countries already have advanced PLiM programmes while others still have none. The PLiM objective is to identify all that factors and requirements for the overall plant life cycle. The optimization of these requirements would allow for the minimum period of the investment return and maximum of the revenue from the sell of the produced electricity. Recognizing the importance of this issue and in response to the requests of the Member States the IAEA Division of Nuclear Power implements the Sub-programme on 'Engineering and Management Support for Competitive Nuclear Power'. Three projects within this sub-programme deal with different aspects of the NPP life cycle management with the aim to increase the capabilities of interested Member States in implementing and maintenance of the competitive and sustainable nuclear power. Although all three projects contain certain issues of PLiM, there is one specific project on guidance on engineering and management practices for optimization of NPP service life. This particular project deals with different specific issues of PLiM including aspects of ageing phenomena and their monitoring, issues of control and instrumentation, maintenance and operation issues, economic evaluation of PLiM including guidance on its earlier shut down and decommissioning

  3. Vacuum Insulation Panels - Study on VIP-components and panels for service life prediction of VIP in building applications (Subtask A)

    Energy Technology Data Exchange (ETDEWEB)

    Simmler, H.; Brunner, S. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Heinemann, U.; Schwab, H. [Bavarian Centre for Applied Energy Research (ZAE Bayern), Garching (Germany); Kumaran, K.; Mukhopadhyaya, P. [National Research Council, Institute for Research in Construction (NRC-IRC), Ottawa (Canada); Quenard, D.; Sallee, H. [Scientific and Technical Centre for Construction (CSTB), Marne la Vallee (France); Noller, K.; Kuecuekpinar-Niarchos, E.; Stramm, C. [Fraunhofer Institute for Process Engineering and Packaging (IVV), Freising (Germany); Tenpierik, M.; Cauberg, H. [Technical University of Delft, Delft (Netherlands); Erb, M. [Dr. Eicher und Pauli AG (Switzerland)

    2005-09-15

    This comprehensive paper takes a look at the properties of vacuum insulation panels (VIP) and was presented as a contribution to the IEA's ECBCS (Energy Conservation in Buildings and Community Systems) Annex 39. The various institutions in Switzerland, Germany, Canada, France, Sweden and the Netherlands participating in the task and their activities are listed. The paper describes the concept of vacuum insulation for buildings and examines the physics involved and core materials that can be used. The physical, mechanical and thermal properties of the core materials are examined and the requirements placed on the envelope of the panels are looked at. Tests made on materials as well as on the complete vacuum insulation panels are described in detail. The results obtained are presented and reviewed. Service-life and quality assurance aspects are also discussed. A comprehensive appendix completes the report.

  4. 38 CFR 23.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-07-01

    ... Prohibited § 23.440 Health and insurance benefits and services. Subject to § 23.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Health and insurance...

  5. 36 CFR 1211.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Health and insurance benefits... Activities Prohibited § 1211.440 Health and insurance benefits and services. Subject to § 1211.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its...

  6. 24 CFR 3.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Health and insurance benefits and... Activities Prohibited § 3.440 Health and insurance benefits and services. Subject to § 3.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its...

  7. 49 CFR 25.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Health and insurance benefits and services. 25.440... Basis of Sex in Education Programs or Activities Prohibited § 25.440 Health and insurance benefits and services. Subject to § 25.235(d), in providing a medical, hospital, accident, or life insurance benefit...

  8. 13 CFR 113.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Health and insurance benefits and....440 Health and insurance benefits and services. Subject to § 113.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a recipient...

  9. Model for Predicting Traffic Signs Functional Service Life – The Republic of Croatia Case Study

    Directory of Open Access Journals (Sweden)

    Dario Babić

    2017-06-01

    Full Text Available Traffic signs are the basic elements of communication between the relevant road authorities and road users. They manage, regulate, inform and warn road users to ensure their safe movement throughout transport networks. Traffic signs must be timely visible to all traffic participants in all weather and traffic conditions in order to fulfil their function, which means they must have satisfactory retroreflection properties. This paper presents a research of the deterioration of traffic signs retroreflection. The aim of this article is to develop models that will effectively enable predicting the retroreflection of traffic signs and thus optimize the maintenance activities and replacement of road signs to increase road safety. The research included measurements of retroreflection of retroreflective material Classes I and II (white, red and blue colour and Class III (red and yellow colour. Based on the collected data from the City of Zagreb (Republic of Croatia, the authors developed the models to estimate the functional service life of certain colours and materials used to make traffic signs. Considering that the average coefficient of determination for all the models is between 0.55-0.60, they present an effective tool in the traffic sign maintenance system.

  10. Life Satisfaction in Persons with Schizophrenia Living in the Community: Validation of the Satisfaction with Life Scale

    Science.gov (United States)

    Wu, Chia-Huei; Wu, Chin-Yu

    2008-01-01

    Subjective well-being is an increasingly common indicator of adequacy of psychiatric services. An easy-to-administer assessment tool of subjective well-being that is conceptually sound, valid, and reliable is needed for use in persons with schizophrenia. The purpose of this paper was to validate the 5-item Satisfaction with Life Scale…

  11. The importance of work or productive activity in life care planning and case management.

    Science.gov (United States)

    Reid, Christine; Riddick-Grisham, Susan

    2015-01-01

    The importance of work or productive activity for the well-being, community integration, and quality of life of people living with disabilities is addressed, with implications for life care planning and case management. The role of work or productive activity in our society, and consequences of deprivation if rehabilitation services do not address vocational effects of disabilities, is explored. A continuum of productivity options is introduced; types of vocational rehabilitation assessment processes and interventions are described. The role of vocational rehabilitation services in life care planning and case management is discussed, focusing on quality of life for people living with disabilities. Rehabilitation and health care professionals should understand the importance of work or other productive activity, and support the development of appropriate plans to address those needs among people who have disabilities.

  12. ICT services for active ageing and independent living: identification and assessment.

    Science.gov (United States)

    Christophorou, Christophoros; Kleanthous, Styliani; Georgiadis, Dimosthenis; Cereghetti, Donato M; Andreou, Panayiotis; Wings, Cindy; Christodoulou, Eleni; Samaras, George

    2016-09-01

    Based on the demographic changes and the rapid increase of older population in Europe, major challenges are expected to rise, both in the economy as well as the society, whether the dominant care model for supporting elderly in living independently at home continues to rely on informal and formal caregivers' assistance. To respond to the above challenges, assistive technologies are called to develop Information and Communication Technology (ICT) services for supporting seniors to remain active and independent, for as long as possible, in their chosen home environment. The work described in this Letter is based on the Miraculous-Life project and it emphasises the identification and assessment of a set of services that an ICT system for Ageing Well should support, in an actual end-users setting. The outcome of this work may inform fellow researchers and other projects in the area of Ageing Well in: (i) understanding which ICT services can be the most valuable for end-users' Quality of Life, (ii) prioritising the development of related ICT services and (iii) facilitating better recourse allocation in order to reduce any risks associated to implementation failures of these services within their respective projects. A final trial phase is planned, aiming to validate the Miraculous Life prototype longitudinally in a naturalistic environment with a larger sample size. During this trial, it will be investigated if perceived usefulness, satisfaction and motivation could be predicted by sociodemographic variables and personality.

  13. CANDU steam generator life management: laboratory data and plant experience

    International Nuclear Information System (INIS)

    Tapping, R.L.; Nickerson, J.H.; Subash, N.; Wright, M.D.

    2001-10-01

    As CANDU reactors enter middle age, and the potential value of the plants in a deregulated market is realized, life management and life extension issues become increasingly important. An accurate assessment of critical components, such as the CANDU 6 steam generators (SGs), is crucial for successful life extension, and in this context, material issues are a key factor. For example, service experience with Alloy 900 tubing indicates very low levels of degradation within CANDU SGs; the same is also noted worldwide. With little field data for extrapolation, life management and life extension decisions for the tube bundles rely heavily on laboratory data. Similarly, other components of the SGs, in particular the secondary side internals, have only limited inspection data upon which to base a condition assessment. However, in this case there are also relatively little laboratory data. Decisions on life management and life extension are further complicated--not only is inspection access often restricted, but repair or replacement options for internal components are, by definition, also limited. The application of CANDU SG life management and life extension requires a judicious blend of in-service data, laboratory research and development (R and D) and materials and engineering judgment. For instance, the available laboratory corrosion and fretting wear data for Alloy 800 SG tubing have been compared with plant experience (with all types of tubing), and with crevice chemistry simulations, in order to provide an appropriate inspection guide for a 50-year SG life. A similar approach has been taken with other SG components, where the emphasis has been on known degradation mechanisms worldwide. This paper provides an outline of the CANDU SG life management program, including the results to date, a summary of the supporting R and D program showing the integration with condition assessment and life management activities, and the approach taken to life extension for a typical

  14. Engaging Youth with and without Significant Disabilities in Inclusive Service Learning

    Science.gov (United States)

    Carter, Erik W.; Swedeen, Beth; Moss, Colleen K.

    2012-01-01

    Service learning is an effective curricular approach to increase instructional relevance and engagement for all students. For students with significant disabilities in transition, meaningful service can be an especially useful avenue for exploring career interests, gaining and practicing important life skills, and connecting to the community in…

  15. A web environment for inspection service; Un entorno WEB para la inspeccion en servicio

    Energy Technology Data Exchange (ETDEWEB)

    Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

    2013-07-01

    The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

  16. The educational dimension of pastoral youth service

    Directory of Open Access Journals (Sweden)

    Dra. Miriam Gallego

    2013-06-01

    Full Text Available The educational dimension of pastoral youth service is highlighted by the fact that it is about education on faith. Faith education means taking a young person towards a personal encounter with God. This fact is also known as an experience with God or religious experience. The religious experience favors cognitive and affective development, desire of the absolute, relationships development, commitments with justice, and the construction of a personal life and social history; in this regard, the religious experience turns into an educational one.The evangelist deed in the pastoral youth service, does not occur through isolated actions but through a process, that is, through a set of educational dynamisms that bring the young person to open up to his/her personal and social reality, to search for answers to his/her questions, be active in society, and build a life project. In pastoral ministries each gesture is, at the same time and with the same intensity, an educational event and a proposal of youth’s lives about God’s mysteries. The pastoral youth service brings educational means —objectives, contents, educational sites, processes, methodologies, people responsible for education, etc.— that can be no doubt evaluated.

  17. Inner and Outer Life at Work. The Roots and Horizon of Psychoanalytically Informed Work Life Research

    Directory of Open Access Journals (Sweden)

    Linda Lundgaard Andersen

    2012-09-01

    Full Text Available The modern labour market has increasingly put the inner working life on the agenda. This stems from a number of societal changes: the knowledge society and its need of personalised competences and work investments in welfare services, the transformation from subject-object relationships to subject-subject relationships and the emergence of the "learning organisations" and reflexive leadership. All of this has been the subject of critical analyses tracing modern work life identities, conflicts, organisational and societal structuration. Against this background the accounts and conceptualisations of work life involving people to people interactions offered by psychodynamic theories and methods take up a pivotal position. Psychoanalytic organisational and work life research explores how work, organisations and individuals are affected by psychic dynamics, the influence of the unconscious in the forms of human development and interaction situated in a societal context. Based on this substantial work I draw upon two influential psychoanalytical positions—the British Tavistock position and German psychoanalytic social psychology in order to situate and identify how to understand the inner and outer life at work—in a generic display of concepts, methods and epistemology. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1203232

  18. 18 CFR 1317.440 - Health and insurance benefits and services.

    Science.gov (United States)

    2010-04-01

    ... § 1317.440 Health and insurance benefits and services. Subject to § 1317.235(d), in providing a medical, hospital, accident, or life insurance benefit, service, policy, or plan to any of its students, a recipient... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Health and insurance...

  19. Extending The Useful Life Of Older Mass Spectrometers

    International Nuclear Information System (INIS)

    Johnson, S.; Cordaro, J.; Holland, M.; Jones, V.

    2010-01-01

    Thermal ionization and gas mass spectrometers are widely used across the Department of Energy (DOE) Complex and contractor laboratories. These instruments support critical missions, where high reliability and low measurement uncertainty are essential. A growing number of these mass spectrometers are significantly older than their original design life. The reality is that manufacturers have declared many of the instrument models obsolete, with direct replacement parts and service no longer available. Some of these obsolete models do not have a next generation, commercially available replacement. Today's budget conscious economy demands for the use of creative funds management. Therefore, the ability to refurbish (or upgrade) these valuable analytical tools and extending their useful life is a cost effective option. The Savannah River Site (SRS) has the proven expertise to breathe new life into older mass spectrometers, at a significant cost savings compared to the purchase and installation of new instruments. A twenty-seven year old Finnigan MAT-261(trademark) Thermal Ionization Mass Spectrometer (TIMS), located at the SRS F/H Area Production Support Laboratory, has been successfully refurbished. Engineers from the Savannah River National Laboratory (SRNL) fabricated and installed the new electronics. These engineers also provide continued instrument maintenance services. With electronic component drawings being DOE Property, other DOE Complex laboratories have the option to extend the life of their aged Mass Spectrometers.

  20. End-of-life care in the United States: policy issues and model programs of integrated care

    Directory of Open Access Journals (Sweden)

    Joshua M. Wiener

    2003-05-01

    Full Text Available Background: End-of-life care financing and delivery in the United States is fragmented and uncoordinated, with little integration of acute and long-term care services. Objective: To assess policy issues involving end-of-life care, especially involving the hospice benefit, and to analyse model programs of integrated care for people who are dying. Methods: The study conducted structured interviews with stakeholders and experts in end-of-life care and with administrators of model programs in the United States, which were nominated by the experts. Results: The two major public insurance programs—Medicare and Medicaid—finance the vast majority of end-of-life care. Both programs offer a hospice benefit, which has several shortcomings, including requiring physicians to make a prognosis of a six month life expectancy and insisting that patients give up curative treatment—two steps which are difficult for doctors and patients to make—and payment levels that may be too low. In addition, quality of care initiatives for nursing homes and hospice sometimes conflict. Four innovative health systems have overcome these barriers to provide palliative services to beneficiaries in their last year of life. Three of these health systems are managed care plans which receive capitated payments. These providers integrate health, long-term and palliative care using an interdisciplinary team approach to management of services. The fourth provider is a hospice that provides palliative services to beneficiaries of all ages, including those who have not elected hospice care. Conclusions: End-of-life care is deficient in the United States. Public payers could use their market power to improve care through a number of strategies.