Thermal hydraulic analysis of Pb-Bi cooled HYPER fuel assemblies using SLTHEN code

International Nuclear Information System (INIS)

Tak, Nam Il; Song, Tae Y.; Park, Won S.; Kim, Chang Hyun

2002-12-01

In the present work, the existing SLTHEN code, which had been originally developed for subchannel analysis of sodium cooled fast reactors, was modified and applied to the Pb-Bi cooled HYPER core which consists of 237 fuel assemblies (TRU assemblies). In the analysis of single fuel assembly having chopped cosine power profile, the validation and the assessment of usefulness of the modified SLTHEN were focused. In the quantitative comparison, the results of the modified SLTHEN agreed well with those of analytical calculations and of MATRA. For the qualitative approaches, the sensitivity calculations for intra-assembly gap flow and turbulent mixing parameter were used. The sensitivity analysis results showed that the modified SLTHEN can provide reasonable simulations of subchannel thermal hydraulics. In particular, turbulent mixing parameter which is known as the most uncertain parameter in subchannel analyses did not affect largely the maximum cladding temperature. Therefore, it can be said that the results of single assembly show the usefulness of the modified SLTHEN code for thermal hydraulic analysis and design of HYPER under the conceptual design stage. In order to assess intra-assembly heat transfer, subchannel analyses were implemented for two types of 7 assemblies; 1) artificial 7 fuel assemblies to maximize intra-assembly heat transfer, 2) central 7 fuel assemblies in the HYPER reference core. The results showed that the modified SLTHEN can reasonably simulate intra-heat transfer and the amount of intra-assembly heat transfer is not so large in HYPER conditions. Particularly, intra-heat transfer did not affect the maximum coolant and the maximum cladding temperatures which are major parameters in conceptual core designs. The capability of full core thermal hydraulic analysis was confirmed by the analysis of 45 fuel assemblies in 1/6 HYPER core at the first cycle. The SLTHEN predicted that the reference design parameters are acceptable in terms of thermal

High temperature ultrasonic transducers for imaging and measurements in a liquid Pb/Bi eutectic alloy.

Science.gov (United States)

Kazys, Rymantas; Voleisis, Algirdas; Sliteris, Reimondas; Mazeika, Liudas; Van Nieuwenhove, Rudi; Kupschus, Peter; Abderrahim, Hamid Aït

2005-04-01

In some nuclear reactors or accelerator-driven systems (ADS) the core is intended to be cooled by means of a heavy liquid metal, for example, lead-bismuth (Pb/Bi) eutectic alloy. For safety and licensing reasons, an imaging method of the interior of ADS, based on application of ultrasonic waves, has thus to be developed. This paper is devoted to description of developed various ultrasonic transducers suitable for long term imaging and measurements in the liquid Pb/Bi alloy. The results of comparative experimental investigations of the developed transducers of different designs in a liquid Pb/Bi alloy up to 450 degrees C are presented. Prototypes with different high temperature piezoelectric materials were investigated: PZT, bismuth titanate (Bi4Ti3O12), lithium niobate (LiNbO3), gallium orthophosphate (GaPO4) and aluminum nitride (A1N). For acoustic coupling with the metal alloy, it was proposed to coat the active surface of the transducers by diamond like carbon (DLC). The radiation robustness was assessed by exposing the transducers to high gamma dose rates in one of the irradiation facilities at SCK x CEN. The experimental results proved that the developed transducers are suitable for long-term operation in harsh conditions.

Pb-for-Bi substitution for enhancing thermoelectric characteristics of [(Bi,Pb)2Ba2O4+/-ω]0.5CoO2

Science.gov (United States)

Sakai, K.; Karppinen, M.; Chen, J. M.; Liu, R. S.; Sugihara, S.; Yamauchi, H.

2006-06-01

We report strongly enhanced thermoelectric characteristics for a misfit-layered oxide, [Bi2Ba2O4±ω]0.5CoO2, in a wide temperature range, as achieved through substituting up to 20% of Bi by Pb. The Pb substitution kept the thermal conductivity (κ) unchanged but decreased the electrical resistivity (ρ) and increased the Seebeck coefficient (S) simultaneously, such that a three-fold enhancement in the thermoelectric figure of merit, Z (≡S2/ρκ), was realized. At the same time x-ray absorption near-edge structure data indicated that the valence and spin states of Co are not affected by the Pb-for-Bi substitution.

Nano-Channels Early Formation Investigation on Stainless Steel 316Ti after Immersion in Molten Pb-Bi

Directory of Open Access Journals (Sweden)

Abu Khalid Rivai

2017-04-01

Full Text Available Pb-Bi (lead-bismuth eutectic-LBE is a coolant of one of main candidates for the future nuclear reactor in the world (Generation IV reactors i.e. LFR (Lead alloy-cooled Fast Reactor, and also a spallation target material for ADS (Accelerator Driven Transmutation System. However, the development of fuel cladding and structural materials in LBE environment, especially at high temperature, is a critical issue for the deployment of LFR and ADS. This is because of the corrosive characteristic of LBE to metals as constituent materials of fuel cladding and structural of the reactors. In this study, corrosion test of a high-chromium austenitic steel i.e. SS316Ti in liquid Pb-Bi at 550ºC has been carried out for about 300 hours. The characterization using SEM-EDS (Scanning Electron Microscope-Energy Dispersive X-ray Spectroscope showed that an iron oxide as the outer layer and a chromium oxide as the inner layer on the surface of the specimen were formed which protected the steel specimen from corrosion and dissolution attack of Pb-Bi. However, small amount of Pb-Bi could penetrate into the iron oxide layer through ultra-thin channels. Atomic Force Microscopy (AFM was employed to investigate the phenomena of the channels formation. The results of the nano-scale investigation showed clearly the formation of the channels.

Preparation of (Bi, Pb)-2223/Ag tapes by high temperature sintering and post-annealing process

DEFF Research Database (Denmark)

Hua, L.; Grivel, Jean-Claude; Andersen, L.G.

2002-01-01

A novel heat treatment process was developed to fabricate (Bi, Pb)-2223/Ag tapes with high critical current density (J(c)). The process can be divided into two parts: reformation and post-annealing. Tapes were first heated to the maximum temperature (830-860 degreesC) followed by slow cooling...... (reformation). Then, tape, were annealed between 760 and 820 degreesC (post-annealing). Reformation is expected to produce a large amount of liquid phase which may heat microcracks, decrease porosity, and improve grain growth. However, since the sintering temperature is beyond the Bi-2223 single-phase region......-energy synchrotron XRD and SEM/EDX. Some process parameters e.g. sintering temperature. cooling rate. and post-annealing time were optimised. (C) 2002 Elsevier Science B.V. All rights reserved....

Technology for cleaning of Pb-Bi adhering to steel (1). Basic tests

International Nuclear Information System (INIS)

Saito, Shigeru; Sasa, Toshinobu; Umeno, Makoto; Kurata, Yuji; Kikuchi, Kenji; Futakawa, Masatoshi

2004-12-01

The accelerator driven system (ADS) is proposed to transmute minor actinides (MA) in high-level waste from spent fuels of nuclear power reactors. Liquid Pb-Bi alloy is a candidate material for spallation target and coolant of ADS. Pb-Bi cleaning technology is required to reduce radiation exposure during maintenance service and to decontaminate replaced components. In this study, three cleaning methods were tested; silicon oil cleaning at 170degC, mixture of acetic acid and nitric acid cleaning. Specimens were prepared by immersion in melted Pb-Bi. After silicon oil tests, most of Pb-Bi remained on the surface of the specimens. It was found that blushing was needed to remove Pb-Bi effectively. On the other hands, Pb-Bi was easily dissolved and almost removed in the mixed acid and nitric acid. Silicon oil cleaning did not affect on base metals. The surface of base metals was slightly blacked after mixed acid cleaning. F82H base metals were corroded by nitric acid. (author)

On the existence of PbBi3PO8

International Nuclear Information System (INIS)

Steinfink, H.; Dass, R.I.; Lynch, V.; Harlow, R.L.; Lee, P.L.

2005-01-01

The title compound crystallizes in the tetragonal system, a = 11.733(2) A, c = 15.587(3) A, I4 mm, Z = 10. Data were collected at the Argonne National Laboratory synchrotron source at λ = 0.15359 A. Least squares refinement on F 2 converged to R1 = 0.039. The oxygen coordination polyhedra around Bi and Pb display the distortions typical of 6s 2 lone-pair atoms. One Bi is disordered. Bi-O bonds vary from 2.08(2) to 2.96(1) A. One Pb is in cubic coordination to oxygen and the second Pb is bonded to six oxygen atoms that form a rectangular pyramid and a seventh oxygen is off one of the rectangular faces of the pyramid. Pb-O bonds vary from 2.303(6) to 2.804(17) A. Of the two crystallographically independent P one is in a single tetrahedral coordination while the second is at the center of two disordered tetrahedra. Units of OM 4 tetrahedra, M = Bi/Pb, articulate into a three-dimensional framework by corner and edge sharing that is strengthened by corner sharing with PO 4 moieties

Pressure induced phase transition in Pb6Bi2S9

DEFF Research Database (Denmark)

Olsen, Lars Arnskov; Friese, Karen; Makovicky, Emil

2011-01-01

consists of two types of moduli with SnS/TlI archetype structure in which the Pb and Bi lone pairs are strongly expressed. The mechanism of the phase transition is described in detail and the results are compared to the closely related phase transition in Pb3Bi2S6 (lillianite).......The crystal structure of Pb6Bi2S9 is investigated at pressures between 0 and 5.6 GPa with X-ray diffraction on single-crystals. The pressure is applied using diamond anvil cells. Heyrovskyite (Bbmm, a = 13.719(4) Å, b = 31.393(9) Å, c = 4.1319(10) Å, Z = 4) is the stable phase of Pb6Bi2S9...... at ambient conditions and is built from distorted moduli of PbS-archetype structure with a low stereochemical activity of the Pb2+ and Bi3+ lone electron pairs. Heyrovskyite is stable until at least 3.9 GPa and a first-order phase transition occurs between 3.9 and 4.8 GPa. A single-crystal is retained after...

Corrosion behavior of materials in a liquid Pb-Bi spallation target

International Nuclear Information System (INIS)

Barbier, F.; Balbaud, F.; Deloffre, P.; Terlain, A.

2001-01-01

Corrosion results of austenitic and martensitic steels exposed to Pb-Bi liquid alloy (material candidate for the spallation target of ADS) are presented. They show the large influence of parameters such as the oxygen content in Pb-Bi and the Pb-Bi velocity on the corrosion. At low O 2 content (7 10 -8 wt%) in Pb-Bi the steels can suffer from significant dissolution while at high O 2 (1-2 10 -6 wt%) content they can be covered by an oxide layer which protects them from the dissolution. Moreover it is shown that, in aniso-thermal systems, the deposit chemical composition formed in the cold parts can depend on the temperature. (authors)

High-density Bi-Pb-Sr-Ca-Cu-O superconductor prepared by rapid thermal melt processing

Science.gov (United States)

Moon, B. M.; Lalevic, B.; Kear, B. H.; McCandlish, L. E.; Safari, A.; Meskoob, M.

1989-10-01

A high quality, dense Bi-Pb-Sr-Ca-Cu-O superconductor has been successfully synthesized by rapid thermal melt processing. Conventionally sintered pellets were melted at 1200 °C, cooled rapidly, and then annealed. As-melted samples exhibited semiconductor behavior, which upon annealing became superconducting at 115 K [Tc(zero)=105 K]. A detailed study of various processing techniques has been carried out.

Reliability of Pb free solder alloys. Physical and mechanical properties; Pb free handa no shinraisei. Butsuri kikaiteki shinraisei

Energy Technology Data Exchange (ETDEWEB)

Sanji, M; Yoshino, M; Ishikawa, J; Takenaka, O [Denso Corp., Aichi (Japan)

1997-10-01

Properties of 19 different Pb free solders have been evaluated in comparison with Sn-37Pb eutectic solder. Pb free solders without Bi were on the same level as Sn-37Pb in tensile strength and elongation, and those with Bi had higher strength and lower elongation than Sn-37Pb. As the Bi content increased, strength was higher, and elongation was lower. In torsion fatigue tests, fatigue life of Pb free solders without Bi was longer than Sn-37Pb. The relationships of Coffin-Manson rule and Basquin rule with fatigue life was applicable to Pb free solder. Fatigue life of those is inferred from their tensile strength. 7 refs., 13 figs., 1 tab.

Determining metal ion distributions using resonant scattering at very high-energy K-edges: Bi/Pb in Pb5Bi6Se14

International Nuclear Information System (INIS)

Zhang Yuegang; Lee, P.L.; Shastri, S.D.; Shu Deming; Wilkinson, A.P.; Chung Duck-Young; Kanatzidis, M.G.

2005-01-01

Powder diffraction data collected at ∝ 86 keV, and just below both the Pb and the Bi K-edges, on an imaging plate detector using synchrotron radiation from the Advanced Photon Source have been used to examine the Pb/Bi distribution over the 11 crystallographically distinct sites in Pb 5 Bi 6 Se 14 [space group P2 1 /m, a=16.0096(2) Aa, b=4.20148(4) Aa, c=21.5689(3) Aa and β=97.537(1) 0 ]. The scattering factors needed for the analyses were determined both by Kramers- Kronig transformation of absorption spectra and by analyses of diffraction patterns from reference compounds. Even with the relatively low scattering contrast that is available at the K-edges, it was possible to determine the Pb/Bi distribution and probe the presence of cation site vacancies in the material. The current results indicate that resonant scattering measurements at high-energy K-edges are a viable, and perhaps preferable, route to site occupancies when absorption from the sample or sample environment/container is a major barrier to the acquisition of high-quality resonant scattering data at lower-energy edges

Potential laboratory health hazard of /sup 210/Pb and a simple procedure for separation of /sup 210/Pb from the daughters /sup 210/Bi and /sup 210/Po

Energy Technology Data Exchange (ETDEWEB)

Pounds, J G [Arkansas Univ., Little Rock (USA). Medical Center; Blakemore, W M [The National Center for Toxicological Research, Department of Health and Human Services, Food and Drug Administration, Jefferson, AR, USA

1981-12-01

Lead 210 (Radium D) is a naturally occurring radionuclide which is frequently used in toxicological studies due to its long half-life. The use of /sup 210/Pb in tracer studies poses two problems. First /sup 210/Pb, along with its daughters /sup 210/Bi and /sup 210/Po, presents a significant health hazard to laboratory personnel. Second, the presence of the daughter products may interfere with the detection of /sup 210/Pb, particularly by techniques which discriminate poorly between different radioactive emissions, e.g. autoradiography. The potential laboratory health hazards of /sup 210/Pb and its daughters are briefly reviewed and a simple dithiozone extraction procedure which allows quantitative separation of /sup 210/Pb from the daughters /sup 210/Po and /sup 210/Bi is described. The purified /sup 210/Pb may then be utilized to reduce the health hazard from the daughter products and to construct calibration curves for the quantitation of /sup 210/Pb in the presence of /sup 210/Bi and /sup 210/Po by liquid scintillation counting.

Synthesis and characterization of PbO-CdO nanocomposite and its effect on (Bi,Pb)-2223 superconductor

Energy Technology Data Exchange (ETDEWEB)

Yahya, Nabil A.A. [Thamar University, Physics Department, Faculty of Education, Thamar (Yemen); Al-Gaashani, R. [Thamar University, Physics Department, Faculty of Education, Thamar (Yemen); Qatar Environment and Energy Research Institute (QEERI), Hamad Bin Khalifa University (HBKU), Doha (Qatar); Abd-Shukor, R. [Universiti Kebangsaan Malaysia, School of Applied Physics, Bangi, Selangor (Malaysia)

2017-03-15

A PbO-CdO nanocomposite-added Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} ((Bi,Pb)-2223) superconductor has been prepared. The effect of the PbO-CdO nanocomposite addition on the transport critical current density (J{sub c}) of (Bi,Pb)-2223 superconductor was investigated. The transition temperature (T{sub c-onset}), zero electrical resistance temperature (T{sub c-R=0}), and J{sub c} of the samples were measured by the four-probe method. Phase formation, structure, and microstructure of samples were investigated. The distribution of nanoparticle size was determined. The results indicated that the PbO-CdO-added samples showed larger grain size and an increased volume fraction of high-T{sub c} phase (Bi-2223) compared to the non-added sample. A slight increase in T{sub c-R=0} of x = 0.15 wt% was observed. J{sub c} of the PbO-CdO nanocomposite-added samples was significantly higher than for the non-added sample. That could be explained by the possibility that the PbO-CdO nanocomposite acts as an effective flux pinning center in (Bi,Pb)-2223. At 77 K, J{sub c} of x = 0.15 wt% added sample was more than 20 times larger than J{sub c} of the non-added sample (x = 0 wt%). A combined effect of enhanced flux pinning, increased fraction of high-T{sub c} phase and improved grain size, which led to increase in the J{sub c} of added samples, is discussed. (orig.)

Investigation of corrosion resistance of 18Cr-14NNi-1.5Si austenitic steel in molten PbBi eutectic

International Nuclear Information System (INIS)

Rivai, A.K.; Heinzel, H.; Effendi, N.

2013-01-01

Full-text: The development of high corrosion resistant materials for the fuel cladding and structural materials in liquid lead-bismuth (Pb-Bi) eutectic environment especially at high temperature is a critical issue for the deployment of LFR (Lead alloy-cooled fast reactor) and ADS (Accelerator driven Transmutation System). Pb-Bi eutectic is a coolant for LFR which is one of the future nuclear reactors in the world (Generation IV reactors), and also a spallation target material and a coolant for ADS. In this study, corrosion test of an austenitic steel was done in COSTA Pb-Bi eutectic corrosion test facility at Pulsed Power and Microwave Technology, Karlsruhe Institute of Technology, Germany. The sample was an 18Cr-14Ni-1.5Si austenitic steel which has been developed in Center For Technology of Nuclear Industry Materials, Indonesian National Nuclear Energy Agency. The test was done in stagnant molten Pb-Bi eutectic at 550 degree Celsius of temperature for about 300 hours with an oxygen concentration of 1 x 10 -6 wt %. The characterization was carried out using OM (Optical Microscope), SEM-EDS (Scanning Electron Microscope and Energy Dispersive X-ray Spectroscope) and AFM (Atomic Force Microscope). The corrosion test result showed the formation of a duplex oxide layer for example an outer iron oxide layer with about 3-3.4 μm in thickness. Furthermore, there was no penetration of Pb-Bi into the bulk of the specimen because of the protection from the protective oxide layer. (author)

The crystal structure of Kirkiite, Pb10Bi3As3S19

DEFF Research Database (Denmark)

Makovicky, Emil; Balic Zunic, Tonci; Karanovic, Ljiljana

2006-01-01

and chemical analysis resulted in comparable formulae, Pb10Bi2.16As3.84S19 and Pb10.08Bi2.55Sb0.13As2.91S19, respectively, which are close to the ideal formula Pb10Bi3As3S19. The crystal lattice shows a pseudohexagonal symmetry, which is the cause of common twinning in this mineral. The main twin-law has (20...... layers parallel to (083) of kirkiite; the slabs are unit-cell-twinned on (010) refl ection planes. The structure contains one split As position, and two additional sites that could accommodate both As and Bi. The As,Bi distribution over these two sites is determined by the trapezoidal distortion...... of the half-octahedral coordination environment inside the tightly bonded double layers of the PbS-SnS archetype slabs. Owing to the stoichiometry requirements in this structure, Bi must also substitute for 1/11 of the Pb sites. Bond-valence calculations and the volumes of coordination polyhedra show...

Modulation-free bismuth-lead cuprate superconductors: BiPbSr1+xL1-xCuO6 and BiPbSr2Y1-xCaxCu2O8

International Nuclear Information System (INIS)

Manivannan, V.; Gopalakrishnan, J.; Rao, C.N.R.

1991-01-01

Modulation-free BiPbSrLCuO 6 (L=La, Pr, Nd) and BiPbSr 2 YCu 2 O 8 , which are isotypic with the n=1 and 2 members of the Bi 2 Sr 2 Ca n-1 Cu n O 2n+4 family, have been prepared and characterized. These parent compounds are nonsuperconducting, but when doped with holes by substitution chemistry give modulation-free superconducting cuprates of the general formulas BiPbSr 1+xL1-x CuO 6 and BiPbSr 2 Y 1-x Ca x Cu 2 O 8 , exhibiting maximum T c 's of 24 and 85 K, respectively. Significantly, the hole concentration at the maximum T c is 0.12 in the cuprate family with a single Cu-O layer and 0.22 in that with two Cu-O layers

Synthesis and evaluation of tetraphosphonates labelled with 212Bi, 212Pb and 165Er

International Nuclear Information System (INIS)

Hassfjell, S.P.

1997-08-01

The main goal of this work has been to achieve a synthesis of radiolabelled phosphonates for the improvement of diagnostic and therapy of osteoblastic osteosarcoma and sclerotic bone metastases. 212 Bi-DOTMP is shown to be an in vivo stable bone seeking radiopharmaceutical with a potential for a α-particle therapy of the above mentioned diseases. It has biodistribution characteristics similar to 153 Sm-EDTMP, which is now formally approved in several countries, most recently in the US. 212 Pb-DOTMP is also a promising candidate having the advantage of increasing the effective half life of the α-emitter, although loss of some of the in vivo generated 212 Bi may be a problem. A generator has been developed for the production of the α-emitting radionuclide 212 Bi and its parent nuclide 212 Pb. The generator is based on the emanation of 220 Rn from ( 228 Th)barium stearate. The decay product of 220 Rn, 212 Pb deposits on the walls of a polyethylene bottle, and can be wasted off with distilled water. The generator shows no leakage of any long-lived parent nuclides, is easy to operate and has a high degree of radiation safety

Liquid Li-Pb-Bi, a new tritium breeder

International Nuclear Information System (INIS)

Rogers, A.G.; Benedict, B.L.; Clemmer, R.G.

1981-01-01

In light of their potential utility as tritium breeder-blanket materials, a study was conducted to identify and characterize low-melting phases in the lithium-lead-bismuth system. It is found that a low-melting ternary phase field did in fact exist, e.g., compositions with less than or equal to 20 atom percent lithium and Pb/Bi = 0.773 melted at or below 140 0 C. In addition, the qualitative reactivity of Li-Bi-Pb alloys with water was tested, and although minimal evidence of exothermic chemical reaction was observed, a physical vapor explosion did occur in one of the tests

Evaluation of Two 300 MWe Fourth Generation Pb-Bi Reactor System Concepts

International Nuclear Information System (INIS)

Miller, Laurence F.; Khuram Khan, M.; Williams, Wesley; Mynatt, F.R.

2002-01-01

This paper describes the evaluation of two 300 MWe modular Pb-Bi cooled reactor system concepts that can be field assembled from components shipped on standard rail cars or on trucks. Thus, the largest components must be smaller than 12' x 12' x 80' (3.66 m x 3.66 m x 24.4 m) and should weigh no more than 80 tons. One of these systems utilizes a cylindrical two-loop containment vessel for the core and the other is a slab design. The fuel for both designs consists of standard-sized metallic IFR fuel in 17 x 17 square array assemblies with a pitch-to-diameter ratio of 1.15. The coolant outlet temperature is limited by current material technology, which is estimated to be 550 C. The primary coolant inlet temperature is selected to be 350 C. This is well above the melting temperature of Pb-Bi, and it is expected to be sufficiently high to limit transient-induced thermal stresses to acceptable values. Coolant flow rates through the core and external piping are below 1 m/s. The results from neutronics calculations include power distributions, reactivity coefficients, and fuel depletion, and results from heat transfer calculations include temperatures and flow rates at various locations in the primary and secondary systems. The neutronic design calculations are accomplished by using a discrete ordinate transport code and a cross section processing system developed at Oak Ridge National Laboratory. Two-dimensional flux distributions are obtained with the DOORS system, and ORIGEN-S, coupled with KENO, is used for time-dependent depletion calculations. The thermal-hydraulic design of the core consists of heat transfer and fluid flow calculation for an average channel. The inlet and outlet temperatures, along with the fuel centerline temperature, are determined in conjunction with core flow rates, pumping power, and total power output. This is accomplished by using a lumped parameter steady-state model with a spreadsheet and by using a one-dimensional time-dependent model

Determining metal ion distributions using resonant scattering at very high-energy K-edges: Bi/Pb in Pb{sub 5}Bi{sub 6}Se{sub 14}

Energy Technology Data Exchange (ETDEWEB)

Yuegang, Zhang; Lee, P L; Shastri, S D; Deming, Shu [Argonne National Lab., IL (United States). XOR, Advanced Photon Source; Wilkinson, A P [Georgia Inst. of Tech., Atlanta (United States). School of Chemistry and Biochemistry; Duck-Young, Chung; Kanatzidis, M G [Michigan State Univ., East Lansing (United States). Dept. of Chemistry

2005-06-01

Powder diffraction data collected at {proportional_to} 86 keV, and just below both the Pb and the Bi K-edges, on an imaging plate detector using synchrotron radiation from the Advanced Photon Source have been used to examine the Pb/Bi distribution over the 11 crystallographically distinct sites in Pb{sub 5}Bi{sub 6}Se{sub 14} [space group P2{sub 1}/m, a=16.0096(2) Aa, b=4.20148(4) Aa, c=21.5689(3) Aa and {beta}=97.537(1){sup 0}]. The scattering factors needed for the analyses were determined both by Kramers- Kronig transformation of absorption spectra and by analyses of diffraction patterns from reference compounds. Even with the relatively low scattering contrast that is available at the K-edges, it was possible to determine the Pb/Bi distribution and probe the presence of cation site vacancies in the material. The current results indicate that resonant scattering measurements at high-energy K-edges are a viable, and perhaps preferable, route to site occupancies when absorption from the sample or sample environment/container is a major barrier to the acquisition of high-quality resonant scattering data at lower-energy edges.

Calorimetric investigation of (Pb0.45Bi0.55)-U system

International Nuclear Information System (INIS)

Agarwal, Renu; Samui, Pradeep; Mukerjee, S.K.; Ramakumar, K.L.

2016-01-01

Lead-bismuth eutectic (LBE) is being considered as a coolant of future high temperature reactors. As lead and bismuth are good spallation target material, they are planned to be used in accelerator driven reactor systems (ADS). Under the clad breach conditions these elements may come in direct contact with uranium of metallic fuel. In our labs, we had earlier investigated binary interactions of U-Pb and U-Bi. To assess interaction behaviour of 'U' with the eutectic melt, it was planned to measure enthalpy of mixing of LBE-U and compares it with the binary mixing. SEM-EDS studies of the product formed after mixing of LBE and 'U' were carried out to establish coexisting phases and their compositions. UPb 3 is Pb-rich compound of U-Pb and UBi 2 is Bi-rich compound of U-Bi. So addition of 'U' in (Pb 0.45 Bi 0.55 ) will result in formation of the more stable compound among UPb 3 and UBi 2

Natural Radioisotopes of Pb, Bi and Po in the Atmosphere of Coal Burning Area

Directory of Open Access Journals (Sweden)

Asnor Azrin Sabuti

2011-07-01

Full Text Available This paper is discussing the changes of natural radionuclides 210Pb, 210Bi and 210Po in atmospheric samples (rainwater and solid fallout caused by Sultan Salahuddin Abdul Aziz coal-fired Power Plant (SSAAPP operation. We also describe the seasonal changes of 210Pb, 210Bi and 210Po to the monsoon seasons in Peninsular Malaysia. Bulk atmospheric trap was used to collect atmospheric samples for five months (7 Feb 2007 to 27 July 2007 and placed within the SSAAPP area. The natural radionuclide activity levels in the atmosphere were affected by local meteorological conditions to impact their variance over time. As a result, the natural radionulides were increased from the ambient value in atmospheric particles (solid fallout, which related to coal combustion by-product releases into atmosphere. In contrast, this was giving relatively lower or in the same magnitude from most places of radionuclides in rainwater samples. Degree of changes between 210Pb, 210Bi and 210Po affected by high temperature combustions were found to be different for each nuclide due to their respective volatility. 210Po in rainwater and solid fallout were considerably low during early inter-monsoon period which mainly controlled by the rainfall pattern. On the other hand, 210Pb and 210Bi in solid fallout were recorded higher concentrations which associated to drier conditions and more particulate content in air column during southwest monsoon. The mean activity ratio of 210BiRW/210PbRW and 210PoRW/210PbRW are 0.47 ± 0.04 and 0.52 ± 0.17, respectively. Whereas for 210BiSF/210PbSF and 210PoSF/210PbSF are 0.52 ± 0.05 and 0.71 ± 0.13, respectively. Some results showed high activity ratios, reaching to 1.87 ± 0.08 for 210Bi/210Pb and 4.58 ± 0.55 for 210Po/210Pb, of which due to additional of 210Bi and 210Po excess. These ratios also indicating that 210Pb and 210Bi could potentially come from the same source, compared to 210Po which varied differently, showing evidence it came

A review of Pb-Sb(As-S, Cu(Ag-Fe(Zn-Sb(As-S, Ag(Pb-Bi(Sb-S and Pb-Bi-S(Te sulfosalt systems from the Boranja orefield, West Serbia

Directory of Open Access Journals (Sweden)

Radosavljević Slobodan A.

2016-01-01

Full Text Available Recent mineralogical, chemical, physical, and crystallographic investigations of the Boranja orefield showed very complex mineral associations and assemblages where sulfosalts have significant role. The sulfosalts of the Boranja orefield can be divided in four main groups: (i Pb-Sb(As-S system with ±Fe and ±Cu; (ii Cu(Ag-Fe(Zn-Sb(As-S system; (iii Ag(Pb-Bi(Sb-S; (iv and Pb-Bi-S(Te system. Spatially, these sulfosalts are widely spread, however, they are the most abundant in the following polymetallic deposits and ore zones: Cu(Bi-FeS Kram-Mlakva; Pb(Ag-Zn-FeS2 Veliki Majdan (Kolarica-Centralni revir-Kojići; Sb-Zn-Pb-As Rujevac; and Pb-Zn-FeS2-BaSO4 Bobija. The multi stage formation of minerals, from skarnhydrothermal to complex hydrothermal with various stages and sub-stages has been determined. All hydrothermal stages and sub-stages of various polymetallic deposits and ore zones within the Boranja orefield are followed by a variety of sulfosalts. [Projekat Ministarstva nauke Republike Srbije, br. OI-176016: Magmatism and geodynamics of the Balkan Peninsula from Mesozoic to present day: Significance for the formation of metallic and non-metallic mineral deposits

The inhomogeneities of (Pb,Bi)2223 superconducting tapes and their detection

International Nuclear Information System (INIS)

Leeuwen, S. van

1999-05-01

This thesis consists of two parts: first, the inhomogeneities that were observed in high temperature superconducting (Pb,Bi)2223 tapes were studied followed by the design of two rigs which were built to detect them. These investigations concentrated on (Pb,Bi)2223 phase high temperature superconducting tapes. Superconductors and their applications were briefly evaluated. It was found that high temperature superconductors have unique properties which cannot be duplicated by their counterparts. However, it was noted that there are significant improvements to be made before they can be commercially viable. An investigation was carried out into the variation of core density within cross sections and along lengths of (Pb,Bi)2223 tapes during fabrication. It was observed that rolling and thermal treatment brought about a non-uniform core density in both these aspects of tile tape. This was followed by an investigation into the effect of core density on the formation of the (Pb,Bi)2223 phase. It was shown that a high core density formed the (Pb,Bi)2223 phase at a slower rate than a lower core density under the thermal treatment. A high core density and a slow heating rate produced smaller 2212 grains at the end of the incubation period. Smaller 2212 grains were thought to be linked to the faster formation of the (Pb,B1)2223 phase. The highest Jc was from a high core density tape which had the smaller 2212 grains at the end of incubation period. Smaller 2212 grains were thought to aid a more homogeneous conversion to the (Pb,Bi)2223 phase. Alloy-sheathed (Pb,Bi)2223 superconducting tapes were produced in order to fabricate a more homogeneous core density. It was found that the alloy sheath (with an addition of 15% wt Ag in the precursor powder) changed the characteristics of the core in several ways: the formation of the (Pb,Bi)2223 phase was homogeneous across the thickness of the core, a smaller 2212 grain size was formed at the end of the incubation period and a higher

Spectroscopy of 214Bi and systematics of 210,212,214Pb(0+) long->β-210,212,214Bi(0-)

International Nuclear Information System (INIS)

Berant, Z.; Schuhmann, R.B.; Alburger, D.E.; Chou, W.T.; Gill, R.L.; Warburton, E.K.; Wesselborg, C.

1991-01-01

Experiments designed to provide more information on the spectroscopy of 214 Bi, and on 214 Pb(β - ) 214 Bi in particular, were undertaken because of interest in first-forbidden β decay in the lead region. The experiments consisted of γ-γ coincidences and angular correlations, conversion electron measurements, level lifetime determinations, and precision γ-ray energy measurements. The 352-keV level of 214 Bi was found to be a strong candidate (and the only candidate) for the 0 1 - state. Recent additions to the 214 Pb decay scheme are confirmed by γ-γ coincidence measurements. A careful evaluation of the 214 Bi level scheme is made with emphasis on separating experimentally based conclusions from speculations based on systematics and other ''weak'' arguments. Shell-model calculations of the spectroscopy of 210,212 Bi and 210,212 Pb(β - ) 210,212 Bi were performed using a modification of the Kuo-Herling realistic interaction. These calculations and a generalized seniority model provide a basis for an examination of the systematics of the A=210, 212, 214 spectroscopy and β decay. The generalized seniority model is found to be a quite good approximation which provides a quantitative understanding of the 214 Pb decay rates

Superconducting properties of Pb82Bi18 films controlled by ferromagnetic nanowire arrays

International Nuclear Information System (INIS)

Ye Zuxin; Lyuksyutov, Igor F; Wu Wenhao; Naugle, Donald G

2011-01-01

The superconducting properties of Pb 82 Bi 18 alloy films deposited on ferromagnetic nanowire arrays have been investigated. Ferromagnetic Co or Ni nanowires are first electroplated into the columnar pores of anodic aluminum oxide (AAO) membranes. Superconducting Pb 82 Bi 18 films are then quench condensed onto the polished surface of the AAO membranes filled with magnetic nanowires. A strong dependence of the Pb 82 Bi 18 superconducting properties on the ratio of the superconducting film thickness to the magnetic nanowire diameter and material variety was observed.

Superconducting properties of Pb82Bi18 films controlled by ferromagnetic nanowire arrays

Science.gov (United States)

Ye, Zuxin; Lyuksyutov, Igor F.; Wu, Wenhao; Naugle, Donald G.

2011-02-01

The superconducting properties of Pb82Bi18 alloy films deposited on ferromagnetic nanowire arrays have been investigated. Ferromagnetic Co or Ni nanowires are first electroplated into the columnar pores of anodic aluminum oxide (AAO) membranes. Superconducting Pb82Bi18 films are then quench condensed onto the polished surface of the AAO membranes filled with magnetic nanowires. A strong dependence of the Pb82Bi18 superconducting properties on the ratio of the superconducting film thickness to the magnetic nanowire diameter and material variety was observed.

Position annihilation study on the (Bi,Pb)-Sr-Ca-Cu-(O,F) superconductor

International Nuclear Information System (INIS)

Wang Xiaogang; Gao Xiaohui; Wang Ruidan; Hu Pingya

1993-01-01

In this note, we report the results of positron lifetime measurements in heat-treated (Bi, Pb)-Sr-Ca-Cu-(O, F), and discuss the possible location of the doped fluorine in the (Bi, Pb)-system superconductors. (orig.)

Syntheses of the Bi(Pb)-2212 high-Tc superconductor through a novel oxide nitrate route

International Nuclear Information System (INIS)

Gibson, K; Ziegler, P; Meyer, H-J

2004-01-01

A novel route is presented for the syntheses of Bi 2 Sr 2 CaCu 2 O x (Bi-2212) and (Bi,Pb) 2 Sr 2 CaCu 2 O x (Bi,Pb-2212). Mixtures of oxides, nitrates and carbonates with approximate 2:2:1:2 metal ion compositions are dissolved in HNO 3 and dried at 200 deg. C in air. Afterwards they are reacted under their in situ generated NO x atmosphere in a closed reactor (Staurohr). This reaction forces the system to form the nitrate precursors (Bi,Sr,Ca) 2 O 2 NO 3 /CuO and (Bi,Pb,Sr,Ca) 2 O 2 NO 3 /CuO, respectively. In the final reaction stage these mixtures are converted into Bi(Pb)-2212 under NO x discharge in air. All important reaction stages and phase compositions are analysed by means of powder XRD

Correlation between modulation structure and electronic inhomogeneity on Pb-doped Bi-2212 single crystals

International Nuclear Information System (INIS)

Sugimoto, A.; Kashiwaya, S.; Eisaki, H.; Yamaguchi, H.; Oka, K.; Kashiwaya, H.; Tsuchiura, H.; Tanaka, Y.

2005-01-01

The correlation between nanometer-size electronic states and surface structure is investigated by scanning tunneling microscopy/spectroscopy (STM/S) on Pb-doped Bi 2-x Pb x Sr 2 CaCu2O 8+y (Pb-Bi-2212) single crystals. The advantage of the Pb-Bi-2212 samples is that the modulation structure can be totally or locally suppressed depending on the Pb contents and annealing conditions. The superconducting gap (Δ) distribution on modulated Pb-Bi-2212 samples showed the lack of correlation with modulation structure except a slight reduction of superconducting island size for the b-axis direction. On the other hand, the optimal doped Pb-Bi-2212 (x = 0.6) samples obtained by reduced-annealing showed totally non-modulated structure in topography, however, the spatial distribution of Δ still showed inhomogeneity of which features were quite similar to those of modulated samples. These results suggest that the modulation structure is not the dominant origin of inhomogeneity although it modifies the streaky Δ structure sub-dominantly. From the gap structure variation around the border of narrow gap and broad gap regions, a trend of the coexistence of two separated phases i.e., superconducting phase and pseudogap like phase, is detected

A comparative neutronic analysis of KALIMER breeder core using Na or Pb-Bi coolant

International Nuclear Information System (INIS)

Yoo, J. W.; Kim, S. J.; Kim, Y. I.

2000-01-01

A comparative neutronic study has been conducted on KALIMER breeder core according to the replacement of sodium coolant by Pb-Bi coolant. Since the atomic weight of Pb and Bi is about 9 times heavier than that of Na, the energy loss by neutron colliding with Pb-Bi nucleus will be very small. Therefore, the reactor with Pb-Bi coolant will have a harder neutron spectrum than that with Na coolant. Consequently, the breeding ratio and burnup reactivity swing is expected to be enhanced. In addition, when Pb-Bi coolant is voided, a negative coolant void coefficient can be obtained by the net effects of smaller spectrum hardening and large neutron leakage. As a result, the breeding ratio was increased from 1.18 to 1.23 and burnup reactivity swing was reduced from 631 pcm to 150 pcm. When the coolant in the whole region of active core is voided, the coolant void coefficient was found to be -539 and -264 pcm at BOEC and EOEC, respectively. In the local voided case, the smaller coolant void coefficient was obtained than that of Na coolant. Accordingly, the use of Pb-Bi coolant in KALIMER gives an advantage of higher breeding ratio, smaller burnup reactivity swing and negative coolant void coefficient without any significant degradation of nuclear performance

Doping of (Bi,Pb)-2223 with metal oxides

International Nuclear Information System (INIS)

Goehring, D.; Vogt, M.; Wischert, W.; Kemmler-Sack, S.

1997-01-01

The effect of doping on formation, superconductivity and pinning forces of (Bi,Pb)-2223 was studied for several dopants. They can be subdivided into promoters (Cu, Mn at low doping level of x=0.1 and Rh) and inhibitors (Mg, Al, Sn, Co, Y, Pd and high substitution levels of Mn and Ni) of the transformation of the precursor material into (Bi,Pb)-2223. According to X-ray diffraction (XRD) studies the incorporation of the dopant into the 2223 lattice is restricted to a very low doping level. Higher dopant concentrations are accompanied by a segregation of secondary phases. These segregations are not effective in the process of creating flux pinning centres. A depression of T c is observed for 2223 materials with the dopants Co, Ni and Pd. (orig.)

Prediction of phase equilibria and thermal analysis in the Bi-Cu-Pb ternary system

Energy Technology Data Exchange (ETDEWEB)

Manasijevic, Dragan [University of Belgrade, Technical Faculty, VJ 12, 19210 Bor (Serbia); Mitovski, Aleksandra, E-mail: amitovski@tf.bor.ac.rs [University of Belgrade, Technical Faculty, VJ 12, 19210 Bor (Serbia); Minic, Dusko [University of Pristina, Faculty of Technical Sciences, 38220 Kosovska Mitrovica (Serbia); Zivkovic, Dragana; Marjanovic, Sasa [University of Belgrade, Technical Faculty, VJ 12, 19210 Bor (Serbia); Todorovic, Radisa [Institute of Mining and Metallurgy, Zeleni Bulevar 35, 19210 Bor (Serbia); Balanovic, Ljubisa [University of Belgrade, Technical Faculty, VJ 12, 19210 Bor (Serbia)

2010-05-20

The knowledge about phase diagram of the Bi-Cu-Pb ternary system is of importance in development of copper-lead based bearing materials, soldering and in refining of copper and lead. In this work, the phase diagram of the Bi-Cu-Pb ternary system was calculated by the CALPHAD method using binary thermodynamic parameters included in the COST 531 database. The results include liquidus projection, invariant equilibria and three vertical sections with molar ratio Cu:Pb = 1, Cu:Pb = 1:3 and Bi:Cu = 1. Alloys, with compositions along three predicted vertical sections, were measured using differential scanning calorimetry (DSC). The experimentally determined phase transition temperatures were compared with calculated results and good mutual agreement was noticed.

Prediction of phase equilibria and thermal analysis in the Bi-Cu-Pb ternary system

International Nuclear Information System (INIS)

Manasijevic, Dragan; Mitovski, Aleksandra; Minic, Dusko; Zivkovic, Dragana; Marjanovic, Sasa; Todorovic, Radisa; Balanovic, Ljubisa

2010-01-01

The knowledge about phase diagram of the Bi-Cu-Pb ternary system is of importance in development of copper-lead based bearing materials, soldering and in refining of copper and lead. In this work, the phase diagram of the Bi-Cu-Pb ternary system was calculated by the CALPHAD method using binary thermodynamic parameters included in the COST 531 database. The results include liquidus projection, invariant equilibria and three vertical sections with molar ratio Cu:Pb = 1, Cu:Pb = 1:3 and Bi:Cu = 1. Alloys, with compositions along three predicted vertical sections, were measured using differential scanning calorimetry (DSC). The experimentally determined phase transition temperatures were compared with calculated results and good mutual agreement was noticed.

Ultrasonic studies of aluminium-substituted Bi(Pb)-2223 superconductors

Science.gov (United States)

Solunke, M. B.; Sharma, P. U.; Pandya, M. P.; Lakhani, V. K.; Modi, K. B.; Venugopal Reddy, P.; Shah, S. S.

2005-09-01

The compositional dependence of elastic properties of Al^{3+}-substitu- ted Bi(Pb)-2223 superconducting system with the general formula Bi_{1.7-x}Al_xPb_{0.3}Sr_2Ca_2- Cu_3O_y (x = 0.0, 0.1, 0.2 and 0.3) have been studied by means of ultrasonic pulse transmission (UPT) technique at 1 MHz (300 K). The elastic moduli of the specimens are computed and corrected to zero porosity. The observed variation of elastic constants with aluminium substitution has been explained on the basis of the strength of interatomic bonding. The applicability of heterogeneous metal mixture rule for estimating elastic constants and transition temperature has been tested.

Synthesis and crystal structure of Bi6.4Pb0.6P2O15.2

International Nuclear Information System (INIS)

Arumugam, N.; Lynch, V.; Steinfink, H.

2007-01-01

Bi 6.4 Pb 0.6 P 2 O 15.2 is a polymorph of structures with the general stoichiometry Bi 6+x M 1-x P 2 O 15+y . However, unlike previously published structures that consist of layers formed by edge sharing OBi 4 tetrahedra bridged by PO 4 and TO 6 (T=transition metal) tetrahedra and octahedra the title compound's structure is more complex. It is monoclinic, C2, a=19.4698(4) A, b=11.3692(3) A, c=16.3809(5) A, β=101.167(1) o , Z=10. Single-crystal X-ray diffraction data were refined by least squares on F 2 converging to R 1 =0.0387, wR 2 =0.0836 for 7023 intensities. The crystal twins by mirror reflection across (001) as the twin plane and twin component 1 equals 0.74(1). Oxygen ions are in tetrahedral coordination to four metal ions and the O(BiPb) 4 units share corners to form layers that are part of the three-dimensional framework. Eight oxygen ions form a cube around the two crystallographically independent Pb ions. Pb-O bond lengths vary from 2.265(14) to 2.869(14) A. Pairs of such cubes share an edge to form a Pb 3 O 20 unit. The two oxygen ions from the unshared edges are part of irregular Bi polyhedra. Other oxygen ions of Bi polyhedra are part only of O(BiPb) 4 units, and some oxygen ions of the polyhedra are also part of PO 4 tetrahedra. One, two, three and or four PO 4 moieties are connected to the Bi polyhedra. Bi-O bond lengths ≤3.1 A vary from 2.090(12) to 3.07(3) A. The articulations of Pb cubes, Bi polyhedra and PO 4 tetrahedra link into the three-dimensional structure. - Graphical abstract: View of the structure of Bi 6.4 Pb 0.6 P 2 O 15.2 parallel to the b-axis

Design study on simplification of secondary sodium cooling system for sodium cooled FBRs. Study result from JFY2000 to JFY2001

International Nuclear Information System (INIS)

Hori, Toru; Kawasaki, Nobuchika; Konomura, Mamoru

2002-09-01

For the 'Feasibility Studies on Commercialized Fast Reactor System' , various concepts with the simplified secondary sodium cooling system were designed, and the feasibility of technical issues was evaluated by focusing on improvement of economy and safety, especially elimination or mitigation of sodium-water direct interaction on heat transfer tube failure accident. In JFY 2000, 8 concepts with inert intermediate media were evaluated from standpoints of economy, safety, and structure integrity. And as promising candidates, the Pb-Bi pool type SG and the Pb-Bi tube type SG (concentric triple-walled tube) were selected, which had low cost compared with conventional IHX and SG system, and had potential of eliminating sodium-water direct interaction by separation of sodium and water tube zone. In JFY 2001, for the Pb-Bi tube type SG, important technical issues on 'Pb-Bi triple-walled tube specification suitable for safety demand', 'safety frame work corresponded to tube failure accident', and 'measures for Pb-Bi leakage into primary sodium loop' were studied, and the SG concept was constructed. In order to eliminate the design supposition of guillotine failure, available design measures for tube specification were tried to extract. But based on vibration characteristics of Pb-Bi triple-walled tube, the time required difference between outer and inner tube failure could not increase largely compared with known double-walled tube. The Pb-Bi tube type SG had potential of cost reduction (81% of cooling system, and 97% of plant), compared with conventional IHX and SG. But finally it was judged that design study on this type SG would not be executed after JFY 2002, due to impossibility of eliminating the design supposition of guillotine failure. (author)

Radio frequency response of Ag-sheathed (Bi, Pb)2Sr2Ca2Cu3O10+x superconducting tapes

International Nuclear Information System (INIS)

Grasso, G.

2000-01-01

The response of long (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10 conductors fabricated by the oxide-powder-in-tube method to a radio frequency excitation was investigated while employed as the inductive part of large L-C resonating circuits. After removal of the outer silver sheath, superconducting devices cooled down to 77 K showed superior properties compared to equivalent non-superconducting circuits: Bi-based resonators, conceived for a working frequency in the range between 5 and 17 MHz, presented an improvement of the quality factor by a factor of 20. This result opens new perspectives for the application of Bi-based superconducting materials in the detection of a weak radio frequency signal, as in magnetic resonance imaging. (author)

Convenient hydrothermal decomposition process for preparation of nanocrystalline mineral Cu3BiS3 and Pb1-xBi2x/3S

International Nuclear Information System (INIS)

Hu Junqing; Deng Bin; Wang Chunrui; Tang Kaibin; Qian Yitai

2003-01-01

Mineral nanocrystalline Cu 3 BiS 3 and Pb 1-x Bi 2x/3 S (or Bi 0.22 Pb 0.89 S 1.22 ) have been prepared at low synthetic temperature of 100-150 deg. C by convenient hydrothermal decomposition process. X-ray powder diffraction, transmission electron microscopy, X-ray photoelectron spectra, and element analysis were used to characterize and measure the samples. The as-prepared Cu 3 BiS 3 sample consisted of whisker-like particles with an average size of 50x10 nm 2 and the Pb 1-x Bi 2x/3 S sample displayed aggregative particles with size in the range of 30-50 nm. Preliminary results showed that the prepared precursors, reaction temperature and time played a role in the formation of the final products. A possible reaction mechanism was also discussed briefly

Influence of PbBi environment on the low-cycle fatigue behavior of SNS target container materials

International Nuclear Information System (INIS)

Kalkhof, D.; Grosse, M.

2003-01-01

The low-cycle fatigue (LCF) behavior of the stainless steel 316L and the 10.5Cr-steel Manet-II was investigated at 260 deg. C in air and in stagnant lead-bismuth (PbBi). At low-strain levels, the fatigue lives for 316L in PbBi and air were comparable. At total strain amplitudes of 0.50% and higher a weak influence of PbBi was observed. In contrast to 316L, the results of LCF tests for Manet-II in PbBi showed a significant reduction of lifetime for all applied strain amplitudes. In the worst case the cycle number to crack initiation was reduced by a factor of ∼7 compared with the comparable test in air. For the low-strain amplitude of 0.30%, fatigue tests conducted at a frequency of 0.1 Hz had shorter fatigue lives than at a frequency of 1.0 Hz. For Manet-II the crack propagation in PbBi was much faster than in air, and failure immediate followed the formation of the first macroscopic crack

Comparative study for axial and radial shuffling scheme effect on the performance of Pb-Bi cooled fast reactors with natural uranium as fuel cycle input

International Nuclear Information System (INIS)

Zaki Suud; Indah Rosidah; Maryam Afifah; Ferhat Aziz; Sekimoto, H.

2013-01-01

Full text:Comparative study for the Design of Pb-Bi cooled fast reactors with natural uranium as fuel cycle input using special radial shuffling strategy and axial direction modified CANDLE burn-up scheme has been performed. The reactors utilizes UN-PuN as fuel, Eutectic Pb-Bi as coolant, and can be operated without refueling for 10 years in each batch. Reactor design optimization is performed to utilize natural uranium as fuel cycle input. This reactor subdivided into 6-10 regions with equal volume in radial directions. The natural uranium is initially put in region 1, and after one cycle of 10 years of burn-up it is shifted to region 2 and the region 1 is filled by fresh natural uranium fuel. This concept is basically applied to all regions. The calculation has been done by using SRAC-Citation system code and JENDL-3.2 library. The effective multiplication factor change increases monotonously during 10 years reactor operation time. There is significant power distribution change in the central part of the core during the BOC and the EOC in the radial shuffling system. It is larger than that in the case of modified CANDLE case which use axial direction burning region move. The burn-up level of fuel is slowly grows during the first 15 years but then grow faster in the rest of burn-up history. This pattern is a little bit different from the case of modified CANDLE burn-up scheme in Axial direction in which the slow growing burn-up period is relatively longer almost half of the burn-up history. (author)

Synthesis and evaluation of tetraphosphonates labelled with {sup 212}Bi, {sup 212}Pb and {sup 165}Er

Energy Technology Data Exchange (ETDEWEB)

Hassfjell, S.P

1997-08-01

The main goal of this work has been to achieve a synthesis of radiolabelled phosphonates for the improvement of diagnostic and therapy of osteoblastic osteosarcoma and sclerotic bone metastases. {sup 212}Bi-DOTMP is shown to be an in vivo stable bone seeking radiopharmaceutical with a potential for a {alpha}-particle therapy of the above mentioned diseases. It has biodistribution characteristics similar to {sup 153}Sm-EDTMP, which is now formally approved in several countries, most recently in the US. {sup 212}Pb-DOTMP is also a promising candidate having the advantage of increasing the effective half life of the {alpha}-emitter, although loss of some of the in vivo generated {sup 212}Bi may be a problem. A generator has been developed for the production of the {alpha}-emitting radionuclide {sup 212}Bi and its parent nuclide {sup 212}Pb. The generator is based on the emanation of {sup 220}Rn from ({sup 228}Th)barium stearate. The decay product of {sup 220}Rn, {sup 212}Pb deposits on the walls of a polyethylene bottle, and can be wasted off with distilled water. The generator shows no leakage of any long-lived parent nuclides, is easy to operate and has a high degree of radiation safety.

Proceedings of 'workshop on Pb-alloy cooled fast reactor'

International Nuclear Information System (INIS)

Kim, Sang Ji; Kim, Yong Hee; Hong, Ser Gi

2003-06-01

The objective of 'Workshop on Pb-Alloy Cooled Fast Reactor', held in Taejeon, Korea on May 6, 2003, is to enhance the basic knowledge in this area by facilitating the exchange of information and discussions about problematic area of design aspects. There were five presentations from three different countries and about 25 participants gathered during the workshop. The topics covered in the workshop include benefits and drawbacks of Pb-alloy and Sodium coolant, two Pb-alloy cooled 900 MWt reactor designs using both B4C rods and NSTs, BREST-300 breakeven reactor and transmutation effectiveness of LLFPs in the typical thermal/fast neutron systems. The generic conclusion for the Pb-alloy cooled fast reactor from this workshop is as follows: 1) It has a potential to satisfy the goals established for the Generation-IV reactor concepts, so it has a bright future. 2) As a fast neutron system with a moderate breeding or a conversion, it is flexible in its roles and has superior safety characteristics over sodium coolant because of Pb-alloy's chemical inertness with water/air and high boiling temperature

The chemical fate of 212Bi-DOTA formed by β- decay of 212Pb(DOTA)2-

International Nuclear Information System (INIS)

Mirzadeh, S.; Kumar, K.; Gansow, O.A.

1993-01-01

The increasing use of inert metal complexes in radioimmunotherapy prompted us to explore the potential use of 212 Pb chelates. Herein, we report a study of the chemical fate of the 212 Bi-DOTA complex formed by β - decay of 212 Pb(DOTA) 2- (H 4 DOTA = 1,4,7,10-tetraazacyclododecanetetraacetic acid). To assure that both parent and daughter complexes were thermally stable, kinetic studies were performed with 203 Pb(II) and 206 Bi(III) which showed that both lead and bismuth complexes with DOTA undergo chemical exchange only very slowly in aqueous solution at pH 4-10. To investigate whether the complex ion which results from decay of 212 Pb(DOTA) 2- was intact and also stable, solutions initially containing only this ion were analyzed for amounts of DOTA-complexed and uncomplexed 212 Bi after attaining transient equilibrium with 212 Bi. The fraction of 212 Bi radioactivity not complexed to DOTA, vide infra, was found to be 36±2%. This value represents the fraction of breakup of 212 Bi(DOTA) - formed from β - decay of the parent complex. By considering the various extranuclear processes responsible for kinetic and electronic excitation of the 212 Bi daughter, break-up of the 212 Bi-DOTA complex is ascribed to the internal conversion of γ-rays emitted by the excited 212 Bi nuclide. (orig.)

Phase-shift analysis of neutron-209Bi scattering and its comparison to neutron-208Pb scattering

International Nuclear Information System (INIS)

Chen, Z.P.; Tornow, W.; Walter, R.L.

1995-01-01

Published n- 209 Bi elastic differential cross-section, analyzing power, and total cross-section data in the energy range from 1.5 to 14 MeV were analyzed via a phase-shift analysis in order to find out whether these data show similar, unexplained resonance structures as observed recently for n- 208 Pb scattering. Although the n- 209 Bi and n- 208 Pb data are very similar, some of the phase shifts are quite different for the two systems. Only one resonancelike structure was observed for n- 209 Bi scattering in the excitation energy range from 9 to 18 MeV compared to eleven in the n- 208 Pb system, implying that n- 209 Bi data are probably more suitable than the classical n- 208 Pb system for detailed mean-field analyses approached through dispersion-relation optical models

SINTESIS SUPERKONDUKTOR SISTEM (Bi,PbSr(Y,CaCuO BERFASE 1212 DENGAN METODE PELELEHAN

Directory of Open Access Journals (Sweden)

M. Sumadiyasa

2012-08-01

Full Text Available Superconductors system BPSCCO 1212 phase have been synthesized by solid state reaction with melting methods. The schedules: calcining at 9000C during 10 h, making of pellet, melting at 10100C for 0.1 h, cooling (cooling rate 350C/h to 9800C, and sintering at 9800C during 5, 10, 20, and 30 h. From measurement of XRD, all of the sample has showed to be formed of  Bi-1212 phase. The highest volume fraction reach 91,23 % given by sample which is sintering at 9800C during 10 h. The spectrum pattern show reflection of its 00l extremely high intensity, showing the existence highly textured which as according to the typical behaviour for materials with the c-axis lying normal to the surface plane. The resistivity as function of temperature, that sample not yet shown the existence of Tc0, not yet had the superconducting properties at temperature above 77 K. The SEM shows morphology of surface, showing the existence of  the stacking of plate-like. Analyse EDX at some spots observation, show elements distribution of Bi, Pb, Sr, Y, Ca and Cu nearly homogenous, and its ratio of the spots on grain have been nearly the composition of 1212 phase.

Sorption of radionuclides from Pb-Bi melt. Report 1

International Nuclear Information System (INIS)

Konovalov, Eh.E.; Il'icheva, N.S.; Trifonova, O.E.

2015-01-01

Results of laboratory investigations of sorption and interfacial distribution of 54 Mn, 59 Fe, 60 Co, 106 Ru, 125 Sb, 137 Cs, 144 Ce, 154,155 Eu and 235,238 U radionuclides in the system Pb-Bi melt - steel surface are analyzed. It is shown that 106 Ru and 125 Sb are concentrated in Pb-Bi melt and other radionuclides with higher oxygen affinity are sorbed on oxide deposits on structural materials. Temperature dependences of sorption efficiency of radionuclides are studied. It is shown that there is sharp increase of this value for all radionuclides near the temperature range 350-400 deg C. Recommendations are given on the use of 106 Ru and 125 Sb as a reference for fuel element rupture detection system with radiometric monitoring of coolant melt samples and 137 Cs, 134 Cs, 134m Cs with radiometric monitoring of sorbing samples [ru

Effect of Pb and Cr Substitutions on Phase Formation and Excess Conductivity of Bi-2212 Superconductor

International Nuclear Information System (INIS)

Khir, F. L. M.; Mohamed, Z.; Yusuf, A. A.; Yusof, M. I. M.; Yahya, A. K.

2010-01-01

The influence of Pb and Cr substitutions on the superconducting properties of Bi 2 Sr 2 CaCu 2 O 8 (Bi-2212) superconductors is reported. The samples were prepared from Bi 2-x Pb x Sr 2 Ca 2-y Cr y Cu 3 O 10-δ (x = 0-0.3, y = 0-0.3) starting composition by the solid-state-reaction method. XRD analysis showed formation of pure Bi-2212 for (x = 0, y = 0), (x = 0.3, y = 0.2,) and (x = 0.3, y = 0.2,) starting compositions. Excess conductivity analysis based on Asmalazov-Larkin theory on single-phased Bi2212 samples showed 2D to 3D transition in superconducting fluctuation behavior (SFB) for all the samples. Highest 2D-3D transition temperature, T 2D-3D was observed at Pb and Cr substitutions of x = 0.3, and x = 0.2, respectively.

Study of in vivo generators Pb-212/Bi--212 and U-230/Th-226 for alpha radioimmunotherapy

International Nuclear Information System (INIS)

Le Du, A.

2011-01-01

Alpha-radioimmunotherapy is a promising cancer therapy that uses a-particles vectorized by monoclonal antibody to break down cancerous tumors. The notion of in vivo generator was introduced in 1989 by Leonard Mausner. The concept involves labeling of various molecular carriers (antibodies, peptides, etc) with intermediate half-life generator parents, which after accumulation in the desired tissue generate much shorter half-life daughter radionuclide. This thesis focuses on the study of two in vivo generators potentially interesting for alpha-radioimmunotherapy: Pb-212 / Bi-212 generator and U-230 / Th-226 generator. The first part of this work presents the Pb-212 / Bi-212 generator, two approaches allowing the vectorization. Chelation approach on a protein and an approach by encapsulation in liposomes have been proposed. This last approach appears to be the most interesting. In vitro stability studies have been performed on these labeling. The second part of this work presents the U-230 / Th-226 generator. Studies have first been made to achieve a theoretical model to describe the speciation of Th(IV) in human serum. The efficacy of DTPA as chelating agent for complexation of Th(IV) in human serum could thus be estimated. (author)

Comparative study of silicate glasses containing Bi2O3, PbO and BaO: Radiation shielding and optical properties

International Nuclear Information System (INIS)

Kirdsiri, K.; Kaewkhao, J.; Chanthima, N.; Limsuwan, P.

2011-01-01

Research highlights: → We change Bi 2 O 3 , PbO and BaO concentration in silicate glasses. → The densities of Bi 2 O 3 glasses more than PbO glasses and BaO glasses. → The Um of Bi 2 O 3 glasses and PbO glasses are comparable and more than BaO glasses. → This suggests that Bi 2 O 3 can replace PbO in radiation shielding glasses. - Abstract: The radiation shielding and optical properties of xBi 2 O 3 :(100-x)SiO 2 , xPbO:(100-x)SiO 2 and xBaO:(100-x)SiO 2 glass systems (where 30 ≤ x ≤ 70 is the composition by weight%) have been investigated. Total mass attenuation coefficients (μ m ) of glasses at 662 keV were improved by increasing their Bi 2 O 3 and PbO content, which raised the photoelectric absorption in glass matrices. Raising the BaO content to the same fraction range, however, brought no significant change to μ m . These results indicate that photon is strongly attenuated in Bi 2 O 3 and PbO containing glasses, and but not in BaO containing glass. The results from the optical absorption spectra show an edge that was not sharply defined; clearly indicating the amorphous nature of glass samples. It is observed that the cutoff wavelength for Bi 2 O 3 containing glass was longer than PbO and BaO containing glasses.

Frozen magnetoresistance at magnetization reversal of granular Bi(Pb)-HTSC

International Nuclear Information System (INIS)

Sukhanov, A.A.; Omelchenko, V.I.

2004-01-01

The frozen magnetoresistance dependences of granular Bi(Pb)-HTSC samples on fields initiating a magnetic flux trapping and on magnetic reversal fields Rt(Hi, Hr) are investigated. It is found that the Rt (Hr) dependences are nonmonotonous. The frozen magnetoresistance decreases substantially after the first pulse Hr applied (Hr < Hi) but remains practically unchanged at subsequent remagnetization by magnetic pulses of alternating polarity and of the same amplitude. The effect of magnetic reversal on magnetoresistance anisotropy and the negative magnetoresistance phenomenon are studied. Is shown that the results obtained are inconsistent with the model of critical state for SC grains and the model of SC loops but are well described quantitatively by the proposed Bi(Pb)-HTSC model according to which the magnetic flux trapping occurs in normal grains with HTSC shells and the sample resistance is determined by weak link chains

Structural properties of superconducting Bi-2223/Ag tapes

Energy Technology Data Exchange (ETDEWEB)

Gottschalck Andersen, L.

2001-05-01

The structural properties of silver clad high-T{sub c} superconducting ceramic tapes of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (Bi-2223) have been investigated by means of synchrotron X-ray diffraction (including the 3DXRD microscope setup), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDS). By synchrotron X-ray diffraction in situ studies of the phase development during the transformation of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 1}Cu{sub 2}O{sub x} (Bi-2212) into Bi-2223, the stoichiometry changes and the texture have been performed during annealing in 8% O{sub 2} and in air. Furthermore, an annealing with two high temperature cycles has been performed to study the equilibrium phenomena. During heating (Ca,Sr){sub 2}PbO{sub 4} decomposes at temperatures between 700 deg. C and 840 deg.C. Simultaneously, the Bi-2212 lattice contracts, indicating an incorporation of Pb. Moreover, the grain mis-alignment decreases significantly. In air we have observed that Bi-2212 partly dissociates into (Ca,Sr){sub 2}CuO{sub 3} and a liquid at temperatures above 812 deg. C. At the annealing temperature Bi-2212 and (Ca,Sr){sub 2}CuO{sub 3} react with the liquid to form Bi-2223. The transformation mechanism is discussed. During cooling below {approx}750 deg.C (Ca,Sr){sub 2}CuO{sub 3} and the liquid mainly transform into Bi-2201. Below {approx}780 deg. C Bi-2223 decomposes to 3221. In addition, a two-step cooling experiment and a decomposition study have been performed in 8% O{sub 2}. By TEM the grain and colony size in the c-axis direction, the angles of c-axis tilt grain boundaries and the intergrowth content are investigated. A fully processed tape has on average 50% thicker grains than a tape after the 1st annealing. The angles of c-axis tilt grain boundaries are on average 14 deg. and 26 deg. for the fully processed tape and the tape after the 1st annealing, respectively. The intergrowth content (15%) and

1D chain formation by coadsorption of Pb and Bi on Cu(001): Determination using low energy electron diffraction

Science.gov (United States)

Kabiruzzaman, Md; Ahmed, Rezwan; Nakagawa, Takeshi; Mizuno, Seigi

2017-10-01

Coadsorption of two heavy metals, Pb and Bi, on Cu(001) at room temperature has been studied using low energy electron diffraction (LEED). c(4 × 4), c(2 × 2), and c(9√{ 2}×√{ 2}) phases are obtained at different coverages; here, we have determined the best-fit structure of c(4 × 4) phase. This structure can be described as a 1D substitutional chain arrangement of Pb and Bi atoms between the Cu rows along the [110] direction. The unit cell in the two-dimensional (2D) surface consists of one Bi atom, two Pb atoms, and four Cu atoms with one vacancy at the center. The optimal structure parameters demonstrate that Bi atoms are located at fourfold-hollow sites and that Pb atoms are laterally displaced by 0.78 Å from the fourfold-hollow site toward the vacancy. The reasons for the formation of the c(4 × 4) structure upon deposition of Pb and Bi on Cu(001) are discussed in comparison with a similar structure formed by the individual adsorption of Pb on the same substrate.

A note on structural and dielectric properties of BiFeO3- PbTiO3 and BiFeO3- PbZrO3 composites

International Nuclear Information System (INIS)

Satpathy, S. K.; Mohanty, N. K.; Behera, A. K.; Behera, B.; Nayak, P.

2015-01-01

The composites of BiFeO 3 -PbTiO 3 (BF-PT) and BiFeO 3 -PbZrO 3 (BF-PZ) were prepared by mixed oxide method. Room temperature X-ray diffraction data confirms the rhombohedral and tetragonal crystal structure respectively. Dielectric constant of BF-PZ is found to give high value compared to BF-PT and hence, there is an increase value of ac conductivity for the former. Both the composites show negative temperature coefficient of resistance (NTCR) behavior. The activation energies of BF-PT and BF-PZ are found to be 0.35 eV and 0.53 eV respectively. The d 33 coefficients are found to be 2.0 and 2.1 pC/N for BF-PT and BF-PZ respectively

Pb5Bi24Se41: A new member of the homologous series forming topological insulator heterostructures

International Nuclear Information System (INIS)

Segawa, Kouji; Taskin, A.A.; Ando, Yoichi

2015-01-01

We have synthesized Pb 5 Bi 24 Se 41 , which is a new member of the (PbSe) 5 (Bi 2 Se 3 ) 3m homologous series with m=4. This series of compounds consist of alternating layers of the topological insulator Bi 2 Se 3 and the ordinary insulator PbSe. Such a naturally-formed heterostructure has recently been elucidated to give rise to peculiar quasi-two-dimensional topological states throughout the bulk, and the discovery of Pb 5 Bi 24 Se 41 expands the tunability of the topological states in this interesting homologous series. The trend in the resistivity anisotropy in this homologous series suggests an important role of hybridization of the topological states in the out-of-plane transport. - Graphical abstract: X-ray diffraction profiles taken on cleaved surfaces of single-crystal samples of the (PbSe) 5 (Bi 2 Se 3 ) 3m homologous series with various m values up to 4, which realizes topological insulator heterostructures. Schematic crystal structure of the new phase, m=4, is also shown. - Highlights: • We have synthesized a new member of the homologous series related to topological insulators. • In this compound, a heterostructure of topological and ordinary insulators naturally forms. • Resistivity anisotropy suggests an important role of hybridization of the topological states. • This compound expands the tunability of the topological states via chemical means

Precise measurement of the densities of liquid Bi, Sn, Pb and Sb

International Nuclear Information System (INIS)

Wang Lianwen; Wang Qiang; Xian Aiping; Lu Kunquan

2003-01-01

The densities of liquid Bi, Sn, Pb and Sb have been precisely measured from the melting point up to about 1100 K using an improved Archimedean method. The densities at the melting point for liquid Bi, Sn, Pb and Sb are 10.042 x 10 3 , 6.983 x 10 3 , 10.635 x 10 3 and 6.454 x 10 3 kg m -3 , respectively. Comparisons between our data and those from the literature have been made and they show the present results to be more reliable. Rather than a linear fit for the temperature dependence of the density, a slight deviation from linearity in the temperature dependence of the densities has been observed

Half-metallic antiferromagnetism in double perovskite BiPbCrCuO6

International Nuclear Information System (INIS)

Weng, Ke-Chuan; Wang, Y. K.

2015-01-01

The electronic structure and magnetic properties of BiPbCrCuO 6 double perovskite are investigated based on first-principles density functional calculations with generalized gradient approximation (GGA) and GGA incorporated with Coulomb correlation interaction U (GGA + U). The results suggest the half-metallic (HM) and antiferromagnetic (AFM) properties of BiPbCrCuO 6 double perovskite. The HM-AFM property of the double perovskite is caused by the double-exchange mechanism between neighboring Cr 5+ (t 2g 1 ↓) and Cu 2+ (t 2g 3 ↑t 2g 3 ↓e g 2 ↑e g ↓) via the intermediate O 2− (2s 2 2p 6 ) ion

Corrosion behavior of Al-Fe-sputtering-coated steel, high chromium steels, refractory metals and ceramics in high temperature Pb-Bi

International Nuclear Information System (INIS)

Abu Khalid, Rivai; Minoru, Takahashi

2007-01-01

Corrosion tests of Al-Fe-coated steel, high chromium steels, refractory metals and ceramics were carried out in high temperature Pb-Bi at 700 C degrees. Oxygen concentrations in this experiment were 6.8*10 -7 wt.% for Al-Fe-coated steels and 5*10 -6 wt.% for high chromium steels, refractory metals and ceramics. All specimens were immersed in molten Pb-Bi in a corrosion test pot for 1.000 hours. Coating was done with using the unbalanced magnetron sputtering (UBMS) technique to protect the steel from corrosion. Sputtering targets were Al and SUS-304. Al-Fe alloy was coated on STBA26 samples. The Al-Fe alloy-coated layer could be a good protection layer on the surface of steel. The whole of the Al-Fe-coated layer still remained on the base surface of specimen. No penetration of Pb-Bi into this layer and the matrix of the specimen. For high chromium steels i.e. SUS430 and Recloy10, the oxide layer formed in the early time could not prevent the penetration of Pb-Bi into the base of the steels. Refractory metals of tungsten (W) and molybdenum (Mo) had high corrosion resistance with no penetration of Pb-Bi into their matrix. Penetration of Pb-Bi into the matrix of niobium (Nb) was observed. Ceramic materials were SiC and Ti 3 SiC 2 . The ceramic materials of SiC and Ti 3 SiC 2 had high corrosion resistance with no penetration of Pb-Bi into their matrix. (authors)

Magnetic and structural properties of Bi(2223doped by pb and Sb

Directory of Open Access Journals (Sweden)

H. Salamati

1998-04-01

Full Text Available   In a systematic approach, we have investigated the effect of the presence of Pb and Sb in the Bi site in a BSCCO (2223 phase superconductor. There are some contradictory reports in substitution of Sb in the Bi site. Some researchers report an increase in the Tc of these materials. So, we have made an accurate stoichiometry of these superconductors and selected extra pure starting materials with appropriate ratios of Pb+Sb.   The susceptility of these samples have been measured and the structures of the systems have been studied by SEM and XRD. The results of this investigation show that, Although the presence of Pb is essential for formation of (2223 phase, but addition of small amount of Sb helps to stabilize and enhance the ratio of higher phase. Our results show that, presence of Sb would raise the critical current density, but would not affect the Tc of these superconductors.

Technologies for hydrogen production based on direct contact of gaseous hydrocarbons and evaporated water with Molten Pb or Pb-Bi

International Nuclear Information System (INIS)

Gulevich, A. V.; Martynov, P. N.; Gulevsky, V. A.; Ulyanov, V. V.

2007-01-01

Results of studies intended for the substantiation of a new energy-saving and safe technology for low cost hydrogen production have been presented. The technology's basis is direct mixing of water and (or) gaseous hydrocarbons with heavy liquid metal coolants (HLMC) Pb or Pb-Bi. Preliminary research has been done on thermal dynamics and kinetics of the processes taking place in the interaction of HLMC with hydrocarbon-containing gases. It has been shown as a result that water and gaseous hydrocarbons interact with molten Pb and Pb-Bi relatively quietly in chemical aspect (without ignition and explosions). Therefore, (and taking into account the thermal physics, physical and chemical properties of HLMC such as low pressure of saturated vapor of Pb and Pb- Bi in enhanced temperatures, their good heat conductivity and heat capacity, low viscosity, etc.) heat transfer is possible from the molten metal to water and hydrocarbons without heat transferring partitions (that is, by direct contact of the working media). Devices to implement this method of heating liquid and gaseous media provide essential advantages: - A simple design; - None heat-transferring surfaces subject to corrosion, contamination, thermal fatigue, vibration impacts; - A high effectiveness owing to a larger heat exchanging surface per volume unit; - A small hydraulic resistance. The possibility and effectiveness of heating various gaseous and liquid media in their direct contact with molten Pb and Pb-Bi has been substantiated convincingly by experimental results at IPPE. Besides, the following processes of hydrogen-containing media conversion have been proved feasible thereby. 1. Water decomposition into hydrogen and oxygen. The process can develop at temperatures of 400-1000 degree C. It is necessary to provide constant removal of oxygen from the reaction zone and maintain a minimum possible content of chemically active oxygen in the melt. 2. Pyrolytic decomposition of hydrocarbons into carbon and

Growth of nucleation sites on Pb-doped Bi2Sr2Ca1Cu2O8+δ

International Nuclear Information System (INIS)

Finnemore, D.K.; Xu, M.; Kouzoudis, D.; Bloomer, T.; Kramer, M.J.; McKernan, S.; Balachandran, U.; Haldar, P.

1996-01-01

In the growth of Bi 2 Sr 2 Ca 2 Cu 3 O 10+δ from mixed powders of Pb-doped Bi 2 Sr 2 Ca 1 Cu 2 O 8+δ and other oxides, it has been discovered that a dense array of hillocks or mesas grow at the interface between a Ag overlay and Pb-doped Bi 2 Sr 2 Ca 1 Cu 2 O 8+δ grains during the ramp up to the reaction temperature. As viewed in an environmental scanning electron microscope, the Ag coated grains develop a texture that looks like open-quote open-quote chicken pox close-quote close-quote growing on the grains at about 700 degree C. These hillocks are about 100 nm across and are spaced at about 500 to 1000 nm. If there is no Ag, this texture does not develop. Preliminary measurements indicate that the hillocks are a recrystallization of (Bi,Pb) 2 Sr 2 Ca 1 Cu 2 O 8+δ , and are definitely not a Pb rich phase. copyright 1996 American Institute of Physics

Development of Bi-base high-temperature Pb-free solders with second-phase dispersion: Thermodynamic calculation, microstructure, and interfacial reaction

Science.gov (United States)

Takaku, Yoshikazu; Ohnuma, Ikuo; Kainuma, Ryosuke; Yamada, Yasushi; Yagi, Yuji; Nishibe, Yuji; Ishida, Kiyohito

2006-11-01

Bismuth and its alloys are candidates for Pb-free high-temperature solders that can be substituted for conventional Pb-rich Pb-Sn solders (melting point (mp) = 573 583 K). However, inferior properties such as brittleness and weak bonding strength should be improved for practical use. To that end, BiCu-X (X=Sb, Sn, and Zn) Pb-free high-temperature solders are proposed. Miscibility gaps in liquid BiCu-X alloys were surveyed using the thermodynamic database ADAMIS (alloy database for micro-solders), and compositions of the BiCu-X solders were designed on the basis of calculation. In-situ composite solders that consist of a Bi-base matrix with fine intermetallic compound (IMC) particles were produced by gas-atomizing and melt-spinning methods. The interfacial reaction between in-situ composite solders and Cu or Ni substrates was investigated. The IMCs at the interface formed a thin, uniform layer, which is an appropriate morphology for a reliable solder joint.

Bi-Abundance Ionisation Structure of the Wolf-Rayet Planetary Nebula PB 8

Science.gov (United States)

Danehkar, A.

2018-01-01

The planetary nebula PB 8 around a [WN/WC]-hybrid central star is one of planetary nebulae with moderate abundance discrepancy factors (ADFs 2-3), which could be an indication of a tiny fraction of metal-rich inclusions embedded in the nebula (bi-abundance). In this work, we have constructed photoionisation models to reproduce the optical and infrared observations of the planetary nebula PB 8 using a non-LTE stellar model atmosphere ionising source. A chemically homogeneous model initially used cannot predict the optical recombination lines. However, a bi-abundance model provides a better fit to most of the observed optical recombination lines from N and O ions. The metal-rich inclusions in the bi-abundance model occupy 5.6% of the total volume of the nebula, and are roughly 1.7 times cooler and denser than the mean values of the surrounding nebula. The N/H and O/H abundance ratios in the metal-rich inclusions are 1.0 and 1.7 dex larger than the diffuse warm nebula, respectively. To reproduce the Spitzer spectral energy distribution of PB 8, dust grains with a dust-to-gas ratio of 0.01 (by mass) were also included. It is found that the presence of metal-rich inclusions can explain the heavy element optical recombination lines, while a dual-dust chemistry with different grain species and discrete grain sizes likely produces the infrared continuum of this planetary nebula. This study demonstrates that the bi-abundance hypothesis, which was examined in a few planetary nebulae with large abundance discrepancies (ADFs > 10), could also be applied to those typical planetary nebulae with moderate abundance discrepancies.

Phase equilibria and homogeneity range of the high temperature superconducting compound (Bi,Pb)2+xSr2Ca2Cu3O10+δ

International Nuclear Information System (INIS)

Kaesche, S.

1995-01-01

For the superconducting cuprates (Bi,Pb) 2+x Sr 2 Ca 2 Cu 3 O 10+y phase equilibria, the homogeneity region, and the phase formation has been studied in the temperture range 800 to 890 C. Sintered samples were prepared by a solid state reaction starting from Bi 2 O 3 , PbO, CuO and carbonates CaCO 3 and SrCO 3 in a three-stage calcination process. For the phase identification polarization microscopy, X-ray diffraction and susceptibility measurements have been applied. Multi-phase regions were determined in the cross section of the quasi-ternary system (Bi,Pb) 2 O 3 -SrO-CaO-CuO with constant Bi/(Bi+Pb) ratio 0.84 taking into account the 2223-phase. The homogeneity region was determined as function of Sr, Ca, Bi and Pb concentration. Its maximum size was found at 850 C

Gamma ray shielding characteristic of BiZnBo-SLS and PbZnBo-SLS glass

Science.gov (United States)

Syuhada Ahmad, Nor; Shahrim Mustafa, Iskandar; Mansor, Ishak; Malik, Muhammad Fadhirul Izwan bin Abdul; Ain Nabilah Razali, Nur; Nordin, Sufiniza

2018-05-01

The radiation shielding and optical properties of x [RmOn] (0.5‑x) [ZnO] 0.2 [B2O3] 0.3 [SLS], where RmOn are Bi2O3 and PbO with x = 0.05, 0.10, 0.20, 0.30, 0.40, and 0.45 have been prepared by using the melt-quenching method at 1200 °C and was investigated on their physical, structural and gamma ray shielding properties. Field-emission scanning electron microscope (FESEM) data revealed that the particle morphologies is aggregated and irregular in shapes and size. Energy dispersive x-ray spectroscopy (EDS) elemental mapping data confirmed that all mentioned element all present on the prepared glass. Soda Lime Silica (SLS) that is mainly composed of SiO2 has been utilized in this study as the source of SiO2 for fabrication of glass system. From the result, the density and molar volume of both glass samples increased as Bi2O3 and PbO content increased. The gamma ray shielding properties, such as linear attenuation and mass attenuation coefficient, were increased while half value layer (HVL) and mean free path (MFP) were decreased as the increased in Bi2O3 and PbO concentrations. It is recognized that the mass attenuation coefficient value of Bi2O3 and PbO glass are slightly different. From this study, it can be concluded that from the non-toxicity and shielding point of view, the bismuth glass is a good shield to gamma radiation as compared to lead glass.

Study of the Neutron Deficient Pb and Bi Isotopes by Simultaneous Atomic- and Nuclear-Spectroscopy

CERN Multimedia

Kessler, T

2002-01-01

We propose to study systematically nuclear properties of the neutron deficient lead $^{183-189}$Pb, $^{191g}$Pb, $^{193g}$Pb and bismuth isotopes $^{188-200}$Bi by atomic spectroscopy with the ISOLDE resonance ionisation laser ion source (RILIS) combined with simultaneous nuclear spectroscopy at the detection set-up. The main focus is the determination of the mean square charge radii of $^{183-190}$Pb and $^{188-193}$Bi from which the influence of low-lying intruder states should become obvious. Also the nuclear spin and magnetic moments of ground-states and long-lived isomers will be determined unambiguously through evaluation of the hyperfine structure, and new isomers could be discovered. The decay properties of these nuclei can be measured by $\\alpha$-$\\gamma$ and $\\beta$-$\\gamma$ spectroscopy. With this data at hand, possible shape transitions around mid-shell at N$\\sim$104 will be studied. This data is crucial for the direct test of nuclear theory in the context of intruder state influence (e.g. energy ...

Environmental radioactivity of radon daughter's radionuclides 210Pb-210Bi-210Po

International Nuclear Information System (INIS)

Momoshima, N.

2003-01-01

Radionuclide, 210 Pb(22.3 y)- 210 Bi(5.013 d)- 210 Po(138.4 d) belongs to the uranium decay chain and widely distributed in the environment. 222 Rn escaped from the earth surface is a major source of atmospheric 210 Pb. These nuclides attach with atmospheric aerosols and are removed to the ground as wet and dry depositions. The residence time of the atmospheric aerosol, thus, was obtained by activity ratios of 210 Bi/ 210 Pb and 210 Po/ 210 Pb, showing different values. The discrepancy on the residence times are explained with inputs of 210 Po to the atmosphere other than 222 Rn emanated from the earth surface. The removal of aerosol as wet deposition occupies a significant fraction, which reaches 72% on 210 Pb and 89% on 7 Be. In the ocean, the radionuclides are used as tracer to examine dynamic processes occurring in the ocean, such as removal of particulate matter from seawater column to bottom. The 210 Pb and 210 Po concentrations in the ocean water collected off continent decreased from surface toward bottom, and the shortage on 210 Po content relative to that of 210 Po was observed at shallow ocean layers, however, the 210 Po/ 210 Pb activity ratio closed to the radioactive equilibrium at deeper layers. The 210 Pb is a very good tracer to evaluate an accumulation rate of bottom sediment in ocean, lake and river. This is called as 210 Pb dating and is successfully applicable to accumulation circumstances that bottom sediment deposits at constant rate. Most of the actual cases, simultaneous 137 Cs dating is carried out, which uses 137 Cs peak in the core as originated from radioactive fallout of nuclear tests, showing the maximum in 1963. Recently new findings on source of atmospheric 210 Po are report by laboratory experiments and environmental measurements, which proves biologically supported emission of volatile Po compounds to the atmosphere. (author)

Developments of 207Pb, 208Pb and 209Bi target wheels in the synthesis of 107Ns, 108Hs and 109Mt

International Nuclear Information System (INIS)

Folger, H.; Hartmann, W.; Hessberger, F.P.; Hofmann, S.; Klemm, J.; Muenzenberg, G.; Ninov, V.; Schmidt, K.H.; Schoett, H.J.; Thalheimer, W.; Armbruster, P.

1993-05-01

The developments of 207 Pb, 208 Pb and 209 Bi target wheels and their applications in heavy-ion fusion reactions are reviewed. In both, fabrication and use, the centers of the evaporator or accelerator beams are focussed at wheel radii of 155 mm to specially shaped frames which generate very homogeneous target layers and very constant reaction and counting rates in the experiment. Target areas of up to ∼98% of a wheel's circumference of 974 mm can be provided. The preparation procedures for necessary C backings and protecting layers of C are described, and details are given for the developments of high-vacuum evaporations of 207 Pb, 208 Pb and 209 Bi with deposition yields of 35-55% from tantalum crucibles. The applications of the target wheels in heavy-ion fusion reactions with beams of 54 Cr and 58 Fe at energies near the Coulomb barrier and intensities of ∼10 12 particles/s are mentioned. The target parameters for the production runs of the new chemical elements 107 Ns, 108 Hs and 109 Mt are included. (orig.)

Ag doped (Bi1.6Pb0.4Sr2CaCu2O8+δ textured rods

Directory of Open Access Journals (Sweden)

Díez, J. C.

2008-06-01

Full Text Available In this work, superconducting samples of (Bi1.6Pb0.4Sr2CaCu2O8+δ with Ag additions have been studied. (Bi1.6Pb0.4Sr2CaCu2O8+δ + x wt.% Ag (with x = 0, 1 and 3 powders were synthesized using a sol-gel method. The obtained powders were used as precursors to fabricate long textured cylindrical bars through a floating zone melting method. A drastic change on the microstructure has been found when comparing with undoped Bi2Sr2CaCu2O8+δ samples. The results showed that electrical resistivity at room temperature, critical current as well as flexural strength are improved when Ag is added to these Pb doped samples, while critical temperature does not change. On the other hand, it has been found that samples with composition (Bi1.6Pb0.4Sr2CaCu2O8+δ + Ag shown E-I curves with very high sharpness values on the zone of the superconducting to normal transition, reaching n-values (E∼In as high as 45 at 65K.Se han preparado polvos cerámicos de composición (Bi1.6Pb0.4Sr2CaCu2O8+δ + x % Ag en peso (con x = 0, 1 y 3 mediante un proceso sol-gel. Estos polvos se han utilizado para fabricar precursores que se texturaron por medio del método de fusión zonal flotante. Se ha encontrado un gran cambio en la microestructura cuando se compara con muestras de composición pura Bi2Sr2CaCu2O8+δ. Tanto la resistividad eléctrica a temperatura ambiente, como la corriente crítica, así como la resistencia a flexión se mejoran cuando la Ag se adiciona a estas muestras dopadas con Pb, mientras que no se observa cambio en la temperatura crítica. Por otra parte, se ha encontrado que las muestras de composición (Bi1.6Pb0.4Sr2CaCu2O8+δ + Ag presentan una gran pendiente de la curva E-I en la zona de transición entre el estado superconductor y el estado normal. Con estas composiciones, se han encontrado valores de n (E∼In de hasta 45 a 65K.

Synthesis and photoelectrical performance of nanoscale PbS and Bi2S3 co-sensitized on Ti02 nanotube arrays

Institute of Scientific and Technical Information of China (English)

Fanggong Cai; Min Pan; Yong Feng; Guo Yan; Yong Zhang; Yong Zhao

2017-01-01

TiO2 films have been widely applied in photovoltaic conversion techniques.TiO2 nanotube arrays (TiO2 NAs) can be grown directly on the surface of metal Ti by the anodic oxidation method.Bi2S3 and PbS nanoparticles (NPs) were firstly co-sensitized on TiO2 NAs (denoted as PbS/Bi2S3(n)/TiO2 NAs) by a two-step process containing hydrothermal and sonication-assisted SILAR method.When the concentration of Bi3+ is 5 mmol/L,the best photoelectrical performance was obtained under simulated solar irradiation.The short-circuit photocurrent (Jsc) and photoconversion efficiency (η) of PbS/Bi2S3(5)/TiO2 NAs electrode were 4.70 mA/cm and 1.13 ％,respectively.

Pb induces superconductivity in Bi2Se3 analyzed by point contact spectroscopy

OpenAIRE

Arevalo-López, P.; López-Romero, R. E.; Escudero, R.

2015-01-01

Some topological insulators become superconducting when doped with Cu and Pd. Superconductivity in a non-superconductor may be induced by proximity effect: i.e. Contacting a non-superconductor with a superconductor. The superconducting macroscopic wave function will induce electronic pairing into the normal compound. In the simplest topological insulator, Bi$_2$Se$_3$, superconductivity may be induced with Pb. We studied with point contact junctions formed by contacting Bi$_2$Se$_3$ crystals ...

Determination of the neutron resonance parameters for 206Pb and of the thermal neutron capture cross section for 206Pb and 209Bi

International Nuclear Information System (INIS)

Borella, A.

2005-01-01

Chapter 1 describes the motivation of the measurements (accelerator driven systems, stellar nucleosynthesis, neutron induced reactions on 206 Pb), the present status of the neutron capture data for 206 Pb and 209 Bi and the structure of this work. In Chapter 2 the basic reaction theory underlying this work is described. The neutron induced reaction mechanism and formalism are explained. The parameterisation of the cross section in terms of R-matrix theory is discussed and we put particular emphasis on the statistical behaviour of the resonance parameters and the impact of the angular distribution of gamma rays following neutron capture. The relation between experimental observables and the resonance parameters is discussed together with general comments related to resonance shape analysis. Chapter 3 is focused on the determination of resonance parameters for 206 Pb. We performed high-resolution transmission and capture measurements at the Time-Of-Flight (TOF) facility GELINA of the IRMM at Geel (B) and determined the resonance parameters. For nuclei like 206 Pb, where the total width is dominated by Γ n , the capture area allows to determine G . Transmission measurements were carried out to determine Γ n , and the statistical factor g of resonances. Before performing a Resonance Shape Analysis (RSA) on the transmission and capture data, we verified the neutron flux and resolution at GELINA. We also compared the characteristics of GELINA with those of the n-TOF facility at CERN. A special emphasis is placed on the total energy detection technique using C 6 D 6 detectors. This technique was applied for the determination of the capture cross section. To reduce systematic bias effects on the capture cross section, the response of the detectors was determined by Monte Carlo simulations, which has been validated by experiments. Using these response functions the partial capture cross sections for individual resonances of 206 Pb have been deduced, by unfolding the

Improved ferroelectric and pyroelectric properties of Pb-doped SrBi4Ti4O15 ceramics for high temperature applications

International Nuclear Information System (INIS)

Venkata Ramana, E.; Graça, M.P.F.; Valente, M.A.; Bhima Sankaram, T.

2014-01-01

Highlights: • Sr 1−x Pb x Bi 4 Ti 4 O 15 (SPBT, x = 0 − 0.4) ceramics were synthesized by soft chemical method. • X-ray diffraction analysis confirmed the formation of bismuth layered structure. • SEM images showed plate like grain morphology with random orientation of plate faces. • Pb-doping resulted in improved ferroelectricity of SrBi 4 Ti 4 O 15 ceramics. • Pb-doped SrBi 4 Ti 4 O 15 exhibited improved pyroelectric properties with high T C . -- Abstract: Ferroelectric properties of Pb-modified strontium bismuth titanate ceramics with chemical formula Sr 1−x Pb x Bi 4 Ti 4 O 15 (x = 0–0.4) were investigated. Polycrystalline ceramics were synthesized by soft chemical method to study the effect of Pb-doping on its physical properties. X-ray diffraction analysis revealed a bismuth layered structure for all the compounds. The doping resulted in an increased tetragonal strain and improved ferroelectric properties. Scanning electron microscope images showed plate like grain morphology with random orientation of platelets. The ferroelectric transition temperature of the ceramics increased systematically from 525 °C to 560 °C with the increase of doping concentration. The piezoelectric coefficient (d 33 ) of the ceramics was enhanced significantly with Pb doping, exhibiting a maximum value of 21.8 pC/N for 40 mol.% Pb-doped SBT. Pyroelectric studies carried out using the Byer–Roundy method indicated that the modified SBT ceramics are promising candidates for high temperature pyroelectric applications

The crystal structure of kudriavite, (Cd,Pb)Bi2S4

DEFF Research Database (Denmark)

Balic Zunic, Tonci; Makovicky, Emil

2007-01-01

The crystal structure of kudriavite, (Cd,Pb)Bi2S4, a new mineral species, was solved from single-crystal X-ray-diffraction data and refi ned to R = 4.9% (4.3% for a model with split mixed-cation sites). Lattice parameters are a 13.095(1), b 4.0032(3), c 14.711(1) Å, 115.59(1)°, V 695.6(1) Å3....... The structure is equivalent to that of synthetic CdBi2S4, space group C2/m, Z = 4, and represents a pavonite homologue, N = 3. It is built of three-octahedron-thick columns of (311)PbS-like slabs combined by "unitcell twinning" in a quasi-mirror-glide succession. The slabs, which are intrinsically of the same...... topology, differ in the coordination state of bordering cations because of the relative positions of the adjacent layers. In the slabs of type I (the "non-accreting" slab common to all pavonite homologues), the central columns of octahedra are fl anked by half-octahedral (square-pyramidal) coordinations...

The dispersive optical model for n + [sup 208]Pb and n + [sup 209]Bi

Energy Technology Data Exchange (ETDEWEB)

Walter, R.L. (Dept. of Physics, Duke Univ., Durham, NC (United States) Triangle Univ. Nuclear Lab., Durham, NC (United States)); Weisel, G.J. (Dept. of Physics, Duke Univ., Durham, NC (United States) Triangle Univ. Nuclear Lab., Durham, NC (United States)); Das, R.K. (Dept. of Physics, Duke Univ., Durham, NC (United States) Triangle Univ. Nuclear Lab., Durham, NC (United States)); Tornow, W. (Dept. of Physics, Duke Univ., Durham, NC (United States) Triangle Univ. Nuclear Lab., Durham, NC (United States)); Howell, C.R. (Dept. of Physics, Duke Univ., Durham, NC (United States) Triangle Univ. Nuclear Lab., Durham, NC (United States))

1993-06-01

The dispersive optical model (DOM) provides a natural connection between the shell model potential for bound states and the optical model for nucleon scattering at positive energies. At TUNL we have developed DOMs for neutron scattering for ten nuclei between [sup 27]Al and [sup 209]Bi. In these studies we rely on TUNL measurements of differential cross-section ([sigma]([theta])) and analyzing power, as well as a wealth of [sigma]([theta]) and total cross section measurements from numerous other laboratories. In this paper we briefly outline the DOM method and the achievements in describing scattering data for n + [sup 208]Pb and n + [sup 209]Bi and single-particle bound-state data for neutrons in [sup 208]Pb. (orig.)

Contactless flowrate sensors for Na, PbBi and Pb flows

International Nuclear Information System (INIS)

Buchenau, D.; Gerbeth, G.; Priede, J.

2011-01-01

Accurate and reliable flow rate measurements are required for various liquid metal systems such as the Na or Lead-flows in fast reactors, the PbBi-flows in transmutation systems, or the flows in liquid metal targets. For liquid metal flows, a contactless measurement is preferable. In this paper we report on the recent development of two types of such flow meters. The former operates by detecting the flow-induced disturbance in the phase distribution of an externally applied AC magnetic field. Such a phase-shift flow meter was developed with an emitting coil at one side of the duct and two sensing coils at the opposite side. The second approach uses a rotatable single cylindrical permanent magnet, which is placed close to the liquid metal duct. The rotation rate of this magnet is proportional to the flow rate. (author)

Measurement of the mass attenuation coefficients and electron densities for BiPbSrCaCuO superconductor at different energies

Science.gov (United States)

Çevik, U.; Baltaş, H.

2007-03-01

The mass attenuation coefficients for Bi, Pb, Sr, Ca, Cu metals, Bi2O3, PbO, SrCO3, CaO, CuO compounds and solid-state forms of Bi1.7Pb0.3Sr2Ca2Cu3O10 superconductor were determined at 57.5, 65.2, 77.1, 87.3, 94.6, 122 and 136 keV energies. The samples were irradiated using a 57Co point source emitted 122 and 136 keV γ-ray energies. The X-ray energies were obtained using secondary targets such as Ta, Bi2O3 and (CH3COO)2UO22H2O. The γ- and X-rays were counted by a Si(Li) detector with a resolution of 0.16 keV at 5.9 keV. The effect of absorption edges on electron density, effective atomic numbers and their variation with photon energy in composite superconductor samples was discussed. Obtained values were compared with theoretical values.

An improved method for the separation of 210Bi and 210Po from 210Pb by using solid-phase extraction disk membranes: environmental applications

International Nuclear Information System (INIS)

Marley, N.A.; Gaffney, J.S.; Orlandini, K.A.; Cunningham, M.M.; Drayton, P.J.

1999-01-01

An improved method is described for the rapid separation of 210 Bi and 210 Po from the parent radionuclide, 210 Pb, in environmental samples. After the metals were leached from a variety of matrices, they were converted to their anionic chloride complexes by addition of 1 M HCl. These complexes can be separated by solid-phase extraction with disk extraction membranes impregnated with anionic chelating particles. This separation technique takes advantage of the differences in sorption behavior of the chloride complexes to strongly basic anion exchange groups. The extraction membranes can then be counted directly for 210 Bi and 210 Po. If sufficient time is allowed for ingrowth of the daughter, the concentration of the parent 210 Pb in the original sample can be determined from the concentration of 210 Bi. In addition, the ratios of 210 Bi/ 210 Pb and 210 Po/ 210 Pb can be obtained by immediate extraction of 210 Bi followed by ingrowth of 210 Bi for a second determination to establish 210 Pb concentration levels. This can be accomplished easily in order to estimate the residence times of atmospheric aerosols or aqueous colloidal materials. This new technique avoids the time consuming extraction, precipitation, and electroplating procedures used previously and eliminates the experimental errors associated with multiple sample manipulations. (orig.)

Effect of composition on the fabrication and properties of Ag-Cu alloy sheathed (Bi,Pb)2223 tapes

International Nuclear Information System (INIS)

Nakamura, Yuichi; Nakashima, Sohei; Inada, Ryoji; Oota, Akio

2004-01-01

To achieve high J c values as well as high mechanical strength, the effects of Ag-Cu alloy sheath and initial composition of precursor on the microstructure and J c properties of Ag-Cu alloy sheathed tapes were investigated. The alkaline-earth cuprate particles were found to form preferentially near the interface between superconducting core and sheath. Although the worse (Bi,Pb)2223 purity and microstructure of alloy sheathed tapes, the reduction of J c values of the tapes was small especially in 7-filaments tapes. This might be explained by the well grain alignment of (Bi,Pb)2223 into the middle region of the filament due to the high strength of alloy sheath. The usage of the Cu deficient composition was effective to reduce the total amount of 14:24 particle while the filament thickness should be thin to maintain J c values for Ag-Cu alloy sheathed tapes due to the lack of Cu diffusion from the sheath to convert 2212 into (Bi,Pb) in the middle region of the filament

Liquid-liquid phase separation and solidification behavior of Al55Bi36Cu9 monotectic alloy with different cooling rates

Science.gov (United States)

Bo, Lin; Li, Shanshan; Wang, Lin; Wu, Di; Zuo, Min; Zhao, Degang

2018-03-01

The cooling rate has a significant effect on the solidification behavior and microstructure of monotectic alloy. In this study, different cooling rate was designed through casting in the copper mold with different bore diameters. The effects of different cooling rate on the solidification behavior of Al55Bi36Cu9 (at.%) immiscible alloy have been investigated. The liquid-liquid phase separation of Al55Bi36Cu9 immiscible alloy melt was investigated by resistivity test. The solidification microstructure and phase analysis of Al55Bi36Cu9 immiscible alloy were performed by the SEM and XRD, respectively. The results showed that the liquid-liquid phase separation occurred in the solidification of Al55Bi36Cu9 monotectic melt from 917 °C to 653 °C. The monotectic temperature, liquid phase separation temperature and immiscibility zone of Al55Bi36Cu9 monotectic alloy was lower than those of Al-Bi binary monotectic alloy. The solidification morphology of Al55Bi36Cu9 monotectic alloy was very sensitive to the cooling rate. The Al/Bi core-shell structure formed when Al55Bi36Cu9 melt was cast in the copper mold with a 8 mm bore diameter.

Synthesis and structural characterization of a novel Sillén - Aurivillius bismuth oxyhalide, PbBi3VO7.5Cl, and its derivatives

Science.gov (United States)

Charkin, Dmitri O.; Plokhikh, Igor V.; Kazakov, Sergey M.; Kalmykov, Stepan N.; Akinfiev, Victor S.; Gorbachev, Anatoly V.; Batuk, Maria; Abakumov, Artem M.; Teterin, Yury A.; Maslakov, Konstantin I.; Teterin, Anton Yu; Ivanov, Kirill E.

2018-01-01

A new Sillén - Aurivillius family of layered bismuth oxyhalides has been designed and successfully constructed on the basis of PbBiO2X (X = halogen) synthetic perites and γ-form of Bi2VO5.5 solid electrolyte. This demonstrates, for the first time, the ability of the latter to serve as a building block in construction of mixed-layer structures. The parent compound PbBi3VO7.5-δCl (δ ≤ 0.05) has been investigated by powder XRD, TEM, XPS methods and magnetic susceptibility measurements. An unexpected but important condition for the formation of the mixed-layer structure is partial (ca. 5%) reduction of VV into VIV which probably suppresses competitive formation of apatite-like Pb - Bi vanadates. This reduction also stabilizes the γ polymorphic form of Bi2VO5.5 not only in the intergrowth structure, but in Bi2V1-xMxO5.5-y (M = Nb, Sb) solid solutions.

Analysis of the residual strain change of Bi2212, Ag alloy and Ag during the heating and cooling process in Bi2212/Ag/Ag alloy composite wire

International Nuclear Information System (INIS)

Shin, J K; Ochiai, S; Okuda, H; Mukai, Y; Sugano, M; Sato, M; Oh, S S; Ha, D W; Kim, S C

2008-01-01

The residual strain change of Bi2212 and Ag during the cooling and heating process in the Bi2212/Ag/Ag alloy composite superconductor was studied. First, the residual strain of Bi2212 filaments at room temperature was measured by the x-ray diffraction method. Then, the Young's moduli of the constituents (Bi2212 filaments, Ag and Ag alloy) and yield strains of Ag and Ag alloy were estimated from the analysis of the measured stress-strain curve, based on the rule of mixtures. Also, the coefficient of thermal expansion of the Bi2212 filaments was estimated from the analysis of the measured thermal expansion curve of the composite wire. From the modeling analysis using the estimated property values and the residual strain of Bi2212 filaments, the changes of residual strain of Bi2212, Ag alloy and Ag with temperature during the cooling and heating process were revealed

Influence of conditions of preparation on quality of superconductors Bi(Pb)SrCaCuO with boron

International Nuclear Information System (INIS)

Sykorova, D.; Smrckova, O.; Ptrydes, D.; Vasek, P.

1999-01-01

The aim of this work was to verify influence of B 2 O 3 on formation of the phase Bi-2223 of samples with nominal composition Bi 1.8 (Pb 0.26 )Sr 2 Ca 2 Cu 3 O 8+x . Conditions of preparation of superconductors as well as their properties are described

Study of Bi-2212 phase doped Sn(Pb) by means of pat

International Nuclear Information System (INIS)

Ma Qingzhu; Huang Xiaoqian; Xiong Xiaotao

1997-01-01

Investigation on the effect of Sn/Pb-doped Bi-2212 superconductors has been carried out by the simultaneous measurements of the spectra of positron annihilation lifetime and positron Doppler broadening, together with X-ray diffraction. The results of samples with different doping level show the occupation of Sn atoms on Bi sites. At weak doping level, Sn doping results in a enhancement of cooperation between layers and increment of superconducting transition temperature. At the strong doping level, Sn atoms occupy the sites of Cu-O layers, and at the same time, the other nonsuperconducting phases appear, which results in a decline of the superconducting transition temperature

Measurements of neutron-induced fission cross sections of Pb and Bi at intermediate energies

International Nuclear Information System (INIS)

Ryzhov, Igor; Tutin, Gennady; Eismont, Vilen; Mitryukhin, Andrey; Oplavin, Valery; Soloviev, Sergey; Conde, Henri; Olsson, Nils; Renberg, Per-Ulf

2002-01-01

Neutron-induced fission cross sections of nat Pb and 209 Bi have been measured relative to the 238 U(n.f) cross section at energies 96 MeV for lead and 133 MeV for bismuth. The measurements were performed at the quasi-mono-energetic neutron beam facility of The Svedberg Laboratory in Uppsala using Frisch-gridded ionization chamber. The results obtained are compared with other experimental data. The present state of the Bi standard recommended by IAEA is discussed. (author)

Martensitic transformation behavior in Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys

Energy Technology Data Exchange (ETDEWEB)

Jang, Jai-young; Chun, Su-jin; Kim, Nam-suk; Cho, Jeung-won; Kim, Jae-hyun [School of Materials Science and Engineering, Gyeongsang National University, 900 Gazwadong, Jinju, Gyeongnam 660-701 (Korea, Republic of); Yeom, Jong-taek [Light Metal Division, Korea Institute of Materials Science (KIMS), Changwon 642-831 (Korea, Republic of); Kim, Jae-il [Materials Science and Engineering, University of Dong-A, Hadan-dong, Saha-gu, Busan 604-714 (Korea, Republic of); Nam, Tae-hyun, E-mail: tahynam@gnu.ac.kr [School of Materials Science and Engineering, Gyeongsang National University, 900 Gazwadong, Jinju, Gyeongnam 660-701 (Korea, Republic of)

2013-12-15

Graphical abstract: - Highlights: • Ag, In and Sn were soluble in TiNi matrix, while Sb, Te, Tl, Pb and Bi were not. • The B2-R-B19′transformation occurred in Ti-Ni-(Ag, In, Sn) alloys. • Solid solution hardening was essential for inducing the B2-R transformation. - Abstract: The microstructures and transformation behaviors of Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys were investigated using electron probe micro-analysis (EPMA), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Micro Vickers hardness tests. All specimens consisted of Ti–Ni matrices and second phase particles. Ag, In and Sn were soluble in Ti–Ni matrices with a limited solubility (≤1.0 at%), while Sb, Te, Tl, Pb and Bi were not soluble. Two-stage B2-R-B19′ transformation occurred in Ti–48.8Ni–1.2Ag, Ti–49.0Ni–1.0In and Ti–49.0Ni–1.0Sn alloys, while one-stage B2-B19′ transformation occurred in Ti–49.0Ni–1.0Ag, Ti–49.0Ni–1.0Sb, Ti–49.0Ni–1.0Te, Ti–49.0Ni–1.0Pb and Ti–49.0Ni–1.0Bi alloys. Micro Vickers hardness of the alloys displaying the B2-R-B19′ transformation (Hv 250–368) was much larger than that (

Martensitic transformation behavior in Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys

International Nuclear Information System (INIS)

Jang, Jai-young; Chun, Su-jin; Kim, Nam-suk; Cho, Jeung-won; Kim, Jae-hyun; Yeom, Jong-taek; Kim, Jae-il; Nam, Tae-hyun

2013-01-01

Graphical abstract: - Highlights: • Ag, In and Sn were soluble in TiNi matrix, while Sb, Te, Tl, Pb and Bi were not. • The B2-R-B19′transformation occurred in Ti-Ni-(Ag, In, Sn) alloys. • Solid solution hardening was essential for inducing the B2-R transformation. - Abstract: The microstructures and transformation behaviors of Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys were investigated using electron probe micro-analysis (EPMA), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Micro Vickers hardness tests. All specimens consisted of Ti–Ni matrices and second phase particles. Ag, In and Sn were soluble in Ti–Ni matrices with a limited solubility (≤1.0 at%), while Sb, Te, Tl, Pb and Bi were not soluble. Two-stage B2-R-B19′ transformation occurred in Ti–48.8Ni–1.2Ag, Ti–49.0Ni–1.0In and Ti–49.0Ni–1.0Sn alloys, while one-stage B2-B19′ transformation occurred in Ti–49.0Ni–1.0Ag, Ti–49.0Ni–1.0Sb, Ti–49.0Ni–1.0Te, Ti–49.0Ni–1.0Pb and Ti–49.0Ni–1.0Bi alloys. Micro Vickers hardness of the alloys displaying the B2-R-B19′ transformation (Hv 250–368) was much larger than that (< Hv 200) of the alloys displaying the B2-B19′ transformation. Solid solution hardening was an important factor for inducing the B2-R transformation in Ti–Ni–X (X = non-transition elements) alloys

Effect of copper valence on the glass structure and crystallization behavior of Bi-Pb-Cu-O glasses

International Nuclear Information System (INIS)

Hu, Yi; Lin, U.-L.; Liu, N.-H.

1997-01-01

Bi 0.43 Pb 0.35 Cu 0.22 O y glasses with different Cu + contents were prepared by melting at different temperatures. The glass structure consists of [BiO 3 [ and [BiO 6 [ units and the ratio of [BiO 3 [/[BiO 6 [ increases with increasing Cu + content. The glass transition temperature, the first crystallization temperature peak, and the thermal stability of the glasses decreases with increasing Cu + content. The value of the activation energy, E a , varies as a function of the Cu + content. The crystallization mechanism in the glasses is closely related to the glass structure, which is mainly affected by the Cu + content. (orig.)

Pionic 4f-3d X-rays from 208Pb and 209Bi

International Nuclear Information System (INIS)

Olin, A.; Forsman, J.W.; MacDonald, J.A.; Marshall, G.M.; Numao, T.; Poffenberger, P.R.; Van Esbroek, P.; Kunselman, A.R.; Olaniyi, B.H.

1985-01-01

The X-ray energies and widths of the pionic 4f-3d and 5g-4f transitions have been measured in 208 Pb and 209 Bi. The 3d widths obtained are in reasonable agreement with theory, and do not support the anomalously small values previously reported. (orig.)

Specific heat (1-330K), magnetic susceptiblity and Meissner effect Bi-(Pb)-Sr-Ca-Cu-O samples

International Nuclear Information System (INIS)

Junod, A.; Eckert, D.; Triscone, G.; Brunner, O.; Muller, J.; Zhao, Z.

1989-01-01

Five samples in the Bi 2 - y Pb y Sr 2 CaCu 2 O 8 + x system selected for their sharp diamagnetic transitions are characterized with particular emphasis on the specific heat. The behavior of the magnetic susceptibility upon doping with holes (Pb) is similar to that of the La 1 - y Sr y CuO 4 system

Preliminary design concept of HYPER cooling system using Pb-Bi coolant

Energy Technology Data Exchange (ETDEWEB)

Tak, Nam Il; Song, Tae Y.; Park, Won S.; Kim, Chang H

2001-09-01

The present study focuses on providing the basic concept of HYPER's cooling system based on simple and fundamental calculations. The system operating temperature was preliminarily determined as 340/510 .deg. C. The total system flow rate of HYPER is {approx} 40,000kg/sec and the flow velocity in the core is preliminarily designed to be {approx}1.5 m/sec. For hot conditions of HYPER core, the simple analytic calculation predicted that the maximum temperature of the cladding outer surface is 634 .deg. C, which is below the design limit, 650 .deg. C. However, the SLTHEN code modified for HYPER's subchannel analysis predicted that the maximum temperature of the cladding outer surface in the same conditions is higher than the design limit by 4.7 .deg. C. The comparison with the results of the analytic model and additional sensitivity calculations showed that the modified SLTHEN code can reasonably simulate the heat transfer between subchannels of the HYPER core and be used effectively for thermal hydraulic design of the HYPER core in conceptual design stage. A forced circulation is inevitable during a full power condition since natural circulation is not sufficient to cool the core with reasonable system pressure drop and reasonable system height. However, a natural circulation can be an excellent method for decay heat removal when the height difference between the core and the heat exchanger is above 10 m. In order to avoid high pressure loads on the vessel, loop configuration was chosen. The simplification of cooling system and high system efficiency were attained by removing independent target cooling system and intermediate heat transport system. A superheated rankle cycle was chosen since it is technically matured and its thermal efficiency is reasonably high.

Enhancement of critical currents in bulk and Ag-sheathed Bi(Pb)-2223 superconductors

International Nuclear Information System (INIS)

Brauer, D.J.; Eujen, R.; Hudepohl, J.

1991-01-01

This paper reports on the superconducting properties of the Bi(Pb)-2223 phase that have been optimized. Prolonged annealing of coarse powder raised j c in bulk samples to as high as 1100 Acm -2 at 77 K. the temperature dependence was studied between 96 and 4.2 K whereby j c rose gradually from 120 to 2100 Acm -2 . T c dropped from 107 K to 64 K in magnetic fields up to 4 T but decreased by only 1 K/T in higher fields. A tape prepared by rolling and subsequent annealing of Ag tubes containing Bi(Pb)-2223 powder exhibited a j c of 1700 Acm -2 at 77 K and 11000 Acm -2 at 4.2 K. The latter j c dropped to 3000 Acm -2 in a magnetic field of 0.25 t, but it was still 1200 Acm -2 in a 10 T field. A tape fabricated by pressing a drawn and annealed wire proved to be less sensitive to low magnetic fields

Synthesis of the phase with T sub c =110 K in Bi(Pb)-Sr-Ca-Cu-O superconducting ceramics. Sintez fazy T sub c =110 K sverkhprovodyashchej keramiki sostava Bi(Pb)-Sr-Ca-Cu-O

Energy Technology Data Exchange (ETDEWEB)

Dubovitskij, A V; Makarov, E F; Makova, M K; Merzhanov, V A; Topnikov, V N [AN SSSR, Moscow (USSR). Inst. Khimicheskoj Fiziki

1991-05-01

Synthesis of 110 K single-phase bismuth ceramics (BiPb){sub 2}Sr{sub 2}Ca{sub n-1}Cu{sub n}O{sub x} was conducted in narrow temperature and time range. Diffusion of bismuth ions is proposed to be the decisive factor of synthesis of bismuth ceramics. The diffusion depends on prehistory of basic burden preparation and on its dispersivity and homogeneity in particluar. Optimal time of synthesis for lead doped ceramics of 2223 composition, synthesized from initial nitrate components, is equal to 65 h at 850 deg C. The role of Pb{sup 2+} ions is probably reduced to decrease of diffusion mobility of Bi{sup 3+} ions over the bismuth sublattice. Ceramics doping with CdO and CdCl{sub 2} compounds instead of lead stabilizes superconductivity in bismuth ceramics, but with worth superconducting parameters.

Broadband Cooling Spectra of Hot Electrons and Holes in PbSe Quantum Dots

NARCIS (Netherlands)

Spoor, F.C.M.; Tomić, Stanko; Houtepen, A.J.; Siebbeles, L.D.A.

2017-01-01

Understanding cooling of hot charge carriers in semiconductor quantum dots (QDs) is of fundamental interest and useful to enhance the performance of QDs in photovoltaics. We study electron and hole cooling dynamics in PbSe QDs up to high energies where carrier multiplication occurs. We

Effect of cooling rates on bare bulk and silver wrapped pellets of Bi-2223 superconductor

International Nuclear Information System (INIS)

Terzioglu, C.; Oztuerk, O.; Kilic, A.; Gencer, A.; Belenli, I.

2006-01-01

We have examined the effect of cooling rates on oxygen content of Bi-2223 phase samples with and without silver sheating. Two sets of samples with and without silver sheating were annealed under identical conditions and cooled with rates of 10 deg. C/h, 25 deg. C/h, 50 deg. C/h, 75 deg. C/h, and 100 deg. C/h. XRD examination of the samples showed that a high percentage of Bi-2223 was obtained. Microstructure examinations were performed by scanning electron microscopy. Resistive and magnetic transitions of the samples were studied. All the reported data were discussed and related

Decay of mass-separated 3.0min 195gBi to levels in 195Pb and shape coexistence in the neutron-deficient odd-mass Pb isotopes

International Nuclear Information System (INIS)

Griffin, J.C.; Braga, R.A.; Fink, R.W.; Bingham, C.R.; Coenen, E.; Huyse, M.; Duppen, P. van

1991-01-01

The radioactive decay of mass-separated 3.0 m 195g Bi to 195 Pb has been studied with the UNISOR and LISOL facilities. Time-sequenced spectra of γ-rays, X-rays, and conversion electrons have been obtained, together with γγt, γXt, eγt, and eXt coincidence data. From this information, a decay scheme has been constructed consisting of 23 excited states and 34 transitions in 195 Pb. Transitions with E0 multipole admixtures, indicative of shape coexistence, have been found to de-excite positive-parity levels at 1093, 1329, and 1380 keV. The beta-decay energy of the 195 Bi ground state is deduced to be Q EC =4800 +600 -550 keV based on the measurement of γ-ray-gated K/β + ratios. The excitation energy of the i 13/2 isomer in 195 Pb has been determined to be 203±4 keV from the α-decays of 199m,g Po. (orig.)

Magnetoresistance and magnetothermopower properties of Bi/Ca/Co/O and Bi(Pb)/Ca/Co/O misfit layer cobaltites

CERN Document Server

Maignan, A; Hervieu, M; Michel, C; Pelloquin, D; Khomskii, D

2003-01-01

Two new compounds of the Bi/Ca/Co/O and Bi(Pb)/Ca/Co/O systems have been prepared. Their structure is built up from the intergrowth of four rock-salt-type layers and one [CoO sub 2 ] hexagonal layer. Both cobaltites exhibit large thermopower values (S sub 3 sub 0 sub 0 sub K approx 140 mu V K sup - sup 1), low resistivity values (rho sub 3 sub 0 sub 0 sub K = 40-60 m OMEGA cm) and small thermal conductivities (kappa sub 3 sub 0 sub 0 sub K approx 1 W K sup - sup 1 m sup - sup 1). Furthermore, these compounds exhibit a negative magnetoresistance, (MR = rho sub H - rho sub H sub sub 0 /rho sub H sub = sub 0), reaching, at 2.5 K, - 85% in 7 T for the Bi/Ca/Co/O misfit cobaltite. A large negative magnetothermopower is also found for these cobaltites in the same temperature range. A qualitative explanation of the observed behaviour is proposed.

The sorption of 210Pb, 210Bi and 210Po on montmorillonite: a study with emphasis on reversibility aspects and on the effect of the radioactive decay of adsorbed nuclides

International Nuclear Information System (INIS)

Ulrich, H.J.; Degueldre, C.

1993-01-01

The influence of the ionic strength and of pH on the adsorption/desorption processes of Pb, Bi and Po on montmorillonite has been investigated. For Pb, a strong dependence of the adsorption and desorption processes on the ionic strength was observed at pH d ) are measured. They range from 10 3 to 10 5 ml . g -1 for Pb and from 10 4 to 10 7 ml . g -1 for 210 Bi and 210 Po. When adsorption and desorption coefficients are compared, an agreement is found for both adsorption/desorption R d 's of Pb, whereas, for Bi and Po adsorption R d 's were several orders of magnitude lower than those obtained for desorption. The chemical activities of free Bi and Po in the liquid phase are limited by the formation of Bi and Po-colloids prior to the sorption step. This fact could explain the differences in the R d values. While the adsorption of Pb was reversible, only very small amounts of BI and Po could be desorbed from the montmorillonite (quasi-irreversible adsorption). The radioactive decay of adsorbed 210 Pb to 210 Bi, which in turn decays to 210 Po, can lead to significant changes in the desorption behaviour of the daughter nuclides. Whereas the sorption is nearly irreversible if Bi and Po adsorb on montmorillonite from the aqueous phase, they desorb more easily if they are generated by the radioactive decay of adsorbed 210 Pb. The difference in the distribution coefficients R d is approximately one order of magnitude in the case of Po, and more than 2 orders of magnitude in the case of Bi. (orig.)

Phase stability, oxygen nonstoichiometry, and superconductivity properties of Bi2Sr2CaCu2O8+δ and Bi1.8Pb0.4Sr2Ca2Cu3O10+δ

International Nuclear Information System (INIS)

Mozhaev, A.P.; Chernyaev, S.V.; Badun, Y.V.

1995-01-01

Phase stability of Bi 2 Sr 2 CaCu 2 O 8+δ (2212) and Bi 1.8 Pb 0.4 Sr 2 Ca 2 Cu 3 O 10+δ (2223) was studied by means of thermogravimetry, dilatometry, high-temperature resistivity, and the powder X-ray methods in the temperature range 700-1000 degrees and at P O2 = 1-10 -4.3 atm. The existence of a high-temperature (peritectic melting) boundary of phase stability was found. The temperatures of low-temperature phase decomposition were determined in air and under an oxygen atmosphere. The change in oxygen content was determined for the 2212 phase in the temperature range 700-860 degrees C and at P O2 = 0.21-10 -3.7 atm by iodometric analysis of quenched samples. It was found that in the single-phase region, the change in oxygen nonstoichiometry had an insignificant influence on T c . It was also shown that the slow cooling of samples led to a significant decrease in T c and transport j c due to partial phase decomposition

Thermal Analysis of Cryocooler-Cooled Bi2223 Pulsed Coil

International Nuclear Information System (INIS)

Miyazaki, H; Chigusa, S; Tanaka, I; Iwakuma, M; Funaki, K; Hayashi, H; Tomioka, A

2006-01-01

We fabricated a cryocooler-cooled Bi2223 superconducting pulsed coil and experimentally studied thermal runaway in dc or ac operation. We carried out numerical simulation of thermal properties of the coil in order to explain thermal runaway of the coil. Firstly, we analyzed the total heat generation of flux-flow loss and ac loss inside the winding from the experimental results of the external field losses and the E-J characteristics for the Bi2223 strands. Secondly, we numerically simulated the thermal properties by using 2- dimensional heat conduction equation with axial symmetry. The numerical simulation shows the relation between the initiation of thermal runaway and the temperature distribution with highly concentrated heat source in the winding. We have a semi-quantitative agreement between the numerical results and the experimental ones for the condition of the thermal runaway

Diffuse scattering from the liquid-vapor interfaces of dilute Bi:Ga, Tl:Ga, and Pb:Ga alloys

International Nuclear Information System (INIS)

Li Dongxu; Jiang Xu; Rice, Stuart A.; Lin Binhua; Meron, Mati

2005-01-01

As part of a study of the in-plane wave-vector (q xy ) dependence of the effective Hamiltonian for the liquid-vapor interface, H(q), the wave-vector dependences of diffuse x-ray scattering from the liquid-vapor interfaces of dilute alloys of Bi in Ga, Tl in Ga, and Pb in Ga have been measured. In these dilute alloys the solute component segregates as a monolayer that forms the outermost stratum of the liquid-vapor interfaces, and the density distribution along the normal to the interface is stratified. Over the temperature ranges that the alloy interfaces were studied, the Tl and Pb monolayers exhibit both crystalline and liquid phases while the Bi monolayer is always liquid. The diffuse scattering from the liquid-vapor interfaces of these alloys displays interesting differences with that from the liquid-vapor interface of pure Ga. The presence of a segregated monolayer of solute in the liquid-vapor interface of the alloy appears to slightly suppress the fluctuations in an intermediate wave-vector range in a fashion that preserves the validity of the macroscopic capillary wave model to smaller wavelengths than in pure liquid Ga, and there is an increase in diffuse scattering when the Tl and Pb monolayers melt. The surface intrinsic roughness from fitting the wave-vector dependence of surface tension is 5.0 pm for the Tl:Ga alloy and 1.4 pm for the Bi:Ga alloy. Also, a mode of excitation that contributes to diffuse scattering from the liquid-vapor interface of Pb in Ga, but does not contribute to diffuse scattering from the liquid-vapor interface of Ga, has been identified. It is proposed that this mode corresponds to the separation of the Pb and Ga layers in the regime 1 nm -1 ≤q xy ≤10 nm -1

Electronic structure of bismuth in high-temperature superconductor Bi1.6Pb0.4Sr2Ca2.5Cu3.5Oσ

International Nuclear Information System (INIS)

Band, I.M.; Egorovm, A.I.; Karazhanova, G.I.

1990-01-01

The shifts of K α1 X-ray of bismuth in the HTS-ceramic Bi 1.6 Pb 0.4 Sr 2 Ca 2.5 Cu 5 O σ and Bi 2 O 3 are measured experimentally. It is shown that bismuth is threevalent in the HTS-ceramic. From comparison of the experimental values of shifts with theoretical values calculated within the framework of different modifications of Hartree-Fock method the effective charge at the bismuth atoms in these compounds is determined: q(Bi 2 O 3 )=1.5+2.0, q(Bi 1.6 Pb 0.4 Sr 2 Ca 2.5 Cu 3.5 O σ )= 1.6+2.1. It was suggested, That the Bi significant covalence degree in HTS-ceramic may be a cause of noticeable contribution of the Bi 6p-states in the density of states at Fermi-level. 13 refs.; 1 fig.; 2 tabs

Effect of Sintering Time on Superconducting Wire Bi-Pb-Sr-Ca-Cu-O With Dopant MgO Sheated Ag Using Powder in Tube Method

Directory of Open Access Journals (Sweden)

Hariyati Lubis

2018-01-01

  DAFTAR PUSTAKA Abbas M.M., Abass L.K and Salman U., (2012, Influences of Sintering Time on the Tc of Bi2-xCuxPb0.3Sr2Ca2Cu3010+ High Temperature Superconductors, Energy Procedia 18, 215-224  Abbas, M.M., Abbas, L.K., Bahedh, H.S. 2015. Superconducting Properties of Bi2-SbxPb0,3Sr1,9Ba0,1Ca2Cu3O10+δ Compounds. Journal of Applied Science Research. 11. 22: 164-172 Darsono, N., Imaduddin, A., Raju, K., Yoon, D.H., (2015, Synthesis and Characterization of Bi1.6Pb0.4Sr2Ca2Cu3O7 Superconducting Oxide by High-Energy Milling, J Supercond Nov Magn. E. Chew,. (2010, Superconducting Transformer Design And Construction, University of Canterbury, Christchurch, New Zealand. March Hamadneh, I., Halim, S. A., dan Lee, C. K., (2006,  Characterization of Bi1.6Pb0.4Sr2Ca2Cu3Oy Ceramic Superconductor Prepared Via Coprecipitation Method at Different Sintering Time, J. Mater. Sci, 41: 5526-5530. Hermiz G.Y., Aljurani B.A., Beayaty M.A., (2014, Effect of Mn Substitution on the Superconducting Properties of Bi1.7Pb0,3Sr2Ca2-xMnxCu3O10+, International Journal Of Engineering and Advanced Technology (IJEAT. 3. 4: 213-217 John R Hull, (2003, Applications of high-temperature superconductors in power technology, Reports on Progress in Physics, Volume 66, Number 11 Lu, X.Y., Yi, D., Chen, H., Nagata, A. 2016. Effect of Sn, MgO and Ag2O mix-doping on the formation and superconducting properties of Bi-2223 Ag/tapes. Physics Procedia. 81: 129-132 Meretliev Sh., Sadykov K.B., Berkeliev A., (2000, Doping of High Temperature Superconductors, Turk J Phy.24: 39-48 Mohammed, N. H., Ramadhan A., Ali I. A., Ibrahim, I. H., dan Hassan, M. S, (2012, Optimizing the Preparation Conditions of Bi-2223 Superconducting Phase Using PbO and PbO2, Materials Sciences and Applications, 3: 224-233. Roumie, M., Marhaba, S., Awad R., Kork M., Hassan I., Mawassi R., (2014, Effect of Fe2O3 Nano-Oxide Addition on the Superconducting Properties of the (Bi,Pb-2223 Phase, Journal of Supercond Nov Magn, 27: 143-153 Serkan

Positron lifetime studies of 100-MeV oxygen irradiated Pb-doped Bi-2223 superconductors

NARCIS (Netherlands)

Banerjee, T.; Viswanath, R.N.; Kanjilal, D.; Kumar, R.; Ramasamy, S.

2000-01-01

Positron lifetime studies have been carried out for unirradiated and 100-MeV oxygen ion irradiated Pb-doped Bi-2223 superconductors. The analysis of positron lifetime spectra revealed three lifetime components: a short lifetime, τ1 = 153–196 ps; an intermediate lifetime, τ2 = 269–339 ps; and a long

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

International Nuclear Information System (INIS)

Ismunandar; Kamiyama, T.; Hoshikawa, A.; Zhou, Q.; Kennedy, B.J.; Kubota, Y.; Kato, K.

2004-01-01

The room temperature structures of the five layer Aurivillius phases A 2 Bi 4 Ti 5 O 18 , (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi 2 O 2 ] 2+ layers interleaved with perovskite-like [A 2 Bi 2 Ti 5 O 16 ] 2- blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi 2 O 2 ] 2+ layers and perovskite-like [A 2 Bi 2 Ti 5 O 16 ] 2- blocks were relieved by tilting of the TiO 6 octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475K, respectively. Raman spectra of the compounds are also presented

Conceptual design for accelerator-driven sodium-cooled sub-critical transmutation reactors using scale laws

Energy Technology Data Exchange (ETDEWEB)

Lee, Kwang Gu; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

The feasibility study on conceptual design methodology for accelerator-driven sodium-cooled sub-critical transmutation reactors has been conducted to optimize the design parameters from the scale laws and validates the reactor performance with the integrated code system. A 1000 MWth sodium-cooled sub-critical transmutation reactor has been scaled and verified through the methodology in this paper, which is referred to Advanced Liquid Metal Reactor (ALMR). A Pb-Bi target material and a partitioned fuel are the liquid phases, and they are cooled by the circulation of secondary Pb-Bi coolant and by primary sodium coolant, respectively. Overall key design parameters are generated from the scale laws and they are improved and validated by the integrated code system. Integrated Code System (ICS) consists of LAHET, HMCNP, ORIGEN2, and COMMIX codes and some files. Through ICS the target region, the core region, and thermal-hydraulic related regions are analyzed once-through Results of conceptual design are attached in this paper. 5 refs., 4 figs., 1 tab. (Author)

Cross-sections of (p, xn) nuclear reactions on Pb and Bi by 100 MeV protons

Energy Technology Data Exchange (ETDEWEB)

Oranj, Leila Mokhtari; Jung, Nam Suk; Oh, Joo Hee; Lee, Arim; Kim, Dong Hyun; Bae, Oryun; Lee, Hee Seock [POSTECH, Pohang (Korea, Republic of)

2016-04-15

The development of high-intensity and high-energy accelerator is gaining interest in Korea, in recent years. Rare Isotope Science Project (RISP), Pohang Accelerator Laboratory X-ray Free Electron Laser (PAL-XFEL), Korea Heavy Ion Medical Accelerator (KHIMA) facilities are being designed. In the frame of above projects, for the safety issue and shielding analysis of the accelerator facility, extensive studies including experimental and simulation on the production yields of residual nuclei induced in the accelerator materials such as Pb, Cu and Bi by protons and heavy ions are in progress. In this work, we measured cross-sections of {sup na}'tPb(p,xn){sup 206,205,204,20{sup ,202}}Bi and {sup 209}Bi(p, xn){sup 207,206,205,204},{sup 203}Po nuclear reactions by the 100-MeV protons. The present experimental data are in good agreement with the results of Titarenkoet al. and Gloris et al.. Experimental data were higher than theoretical data. In other words, results of TALYS code and data in TENDL library underestimated the measured crosss sections and library of TALYS code and TENDL need to be improved.

Combinatorial processing libraries for bulk BiFeO3-PbTiO3 piezoelectric ceramics

International Nuclear Information System (INIS)

Hu, W.; Tan, X.; Rajan, K.

2010-01-01

A high throughput approach for generating combinatorial libraries with varying processing conditions for bulk ceramics has been developed. This approach utilized the linear temperature gradient in a tube furnace to screen a whole temperature range for optimized preparation. With this approach, the processing of 0.98[0.6BiFeO 3 -0.4PbTiO 3 ]-0.02Pb(Mg 1/3 Nb 2/3 )O 3 ceramic powders and pellets for high-temperature piezoelectric applications was demonstrated to identify the best synthesis conditions for phase purity. The dielectric property measurement on the as-processed solid solution ceramics confirmed the high Curie temperature and the improved loss tangent with the Pb(Mg 1/3 Nb 2/3 )O 3 doping. (orig.)

(Bi, Pb).sub.2, Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x superconductor and method of making same utilizing sinter-forging

Science.gov (United States)

Chen, Nan; Goretta, Kenneth C.; Lanagan, Michael T.

1998-01-01

A (BiPb).sub.2 Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x (Bi223) superconductor with high J.sub.c, phase purity, density and mechanical strength is formed from Bi2223 powder which is synthesized from a mixture of Bi.sub.2 O.sub.3, PbO, SrCO.sub.3, CaCo.sub.3 and CuO. The mixture is milled, then dried and calcined to synthesize the Bi2223 powder with the desired phase purity. The calcination is performed by heating the dried mixture for 50 hours at 840.degree. C. The partially synthesized powder is then milled for 1-4 hours before calcining further for another 50 hours at 855.degree. C. to complete the synthesis. After calcination, the Bi2223 powder is cold pressed to a predetermined density and sinter forged under controlled temperature and time to form a Bi2223 superconductor with the desired superconducting properties.

(Bi, Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} superconductor and method of making same utilizing sinter-forging

Science.gov (United States)

Chen, N.; Goretta, K.C.; Lanagan, M.T.

1998-10-13

A (BiPb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x}(Bi223) superconductor with high J{sub c}, phase purity, density and mechanical strength is formed from Bi2223 powder which is synthesized from a mixture of Bi{sub 2}O{sub 3}, PbO, SrCO{sub 3}, CaCo{sub 3} and CuO. The mixture is milled, then dried and calcined to synthesize the Bi2223 powder with the desired phase purity. The calcination is performed by heating the dried mixture for 50 hours at 840 C. The partially synthesized powder is then milled for 1--4 hours before calcining further for another 50 hours at 855 C to complete the synthesis. After calcination, the Bi2223 powder is cold pressed to a predetermined density and sinter forged under controlled temperature and time to form a Bi2223 superconductor with the desired superconducting properties. 5 figs.

Structural and electronic investigations of PbTa4O11 and BiTa7O19 constructed from α-U3O8 types of layers

Science.gov (United States)

Boltersdorf, Jonathan; Maggard, Paul A.

2015-09-01

The PbTa4O11 and BiTa7O19 phases were prepared by ion-exchange and solid-state methods, respectively, and their structures were characterized by neutron time-of-flight diffraction and Rietveld refinement methods (PbTa4O11, R 3 (No. 146), a=6.23700(2) Å, c=36.8613(1) Å; BiTa7O19, P 6 bar c 2 (No. 188), a=6.2197(2) Å, c=20.02981(9) Å). Their structures are comprised of layers of TaO6 octahedra surrounded by three 7-coordinate Pb(II) cations or two 8-coordinate Bi(III) cations. These layers alternate down the c-axis with α-U3O8 types of single and double TaO7 pentagonal bipyramid layers. In contrast to earlier studies, both phases are found to crystallize in noncentrosymmetric structures. Symmetry-lowering structural distortions within PbTa4O11, i.e. R 3 bar c →R3, are found to be a result of the displacement of the Ta atoms within the TaO7 and TaO6 polyhedra, towards the apical and facial oxygen atoms, respectively. In BiTa7O19, relatively lower reaction temperatures leads to an ordering of the Bi/Ta cations within a lower-symmetry structure, i.e., P63/mcm→ P 6 bar c 2 . In the absence of Bi/Ta site disorder, the Ta-O-Ta bond angles decrease and the Ta-O bond distances increase within the TaO7 double layers. Scanning electron microscopy images reveal two particle morphologies for PbTa4O11, hexagonal rods and finer irregularly-shaped particles, while BiTa7O19 forms as aggregates of irregularly-shaped particles. Electronic-structure calculations confirm the highest-energy valence band states are comprised of O 2p-orbitals and the respective Pb 6s-orbital and Bi 6s-orbital contributions. The lowest-energy conduction band states are composed of Ta 5d-orbital contributions that are delocalized over the TaO6 octahedra and layers of TaO7 pentagonal bipyramids. The symmetry-lowering distortions in the PbTa4O11 structure, and the resulting effects on its electronic structure, lead to its relatively higher photocatalytic activity compared to similar structures without

Influence of the post-annealing cooling rate on the superconducting and mechanical properties of LFZ textured Bi-2212 rods

CERN Document Server

Natividad, E; Angurel, L A; Salazar, A; Pastor, J Y; Llorca, J

2002-01-01

Laser floating zone textured Bi sub 2 Sr sub 2 CaCu sub 2 O sub 8 sub + subdelta (Bi-2212) thin rods were manufactured and subjected to a two-step annealing process at 870 deg C and 801 deg C in air. It was found that the subsequent cooling process led to marked changes in electrical properties. Three cooling rates were tested: (i) quenching in liquid nitrogen, (ii) cooling in air inside an alumina tube and (iii) cooling inside the furnace. The results showed that the faster the cooling rate, the higher the normal state resistivity. The T sub c distribution across the rods was also affected by the cooling rate, but no large differences were observed in the magnitude of the critical current at 77 K since the homogeneity of furnace-cooled samples compensated for the higher outer J sub c values of fast-cooled ones. The mechanical properties (elastic modulus and flexure strength) were not influenced by the cooling rate, but the samples quenched in liquid nitrogen were often cracked by thermal shock. The elastic m...

Investigating the local structure of B-site cations in (1-x)BaTiO3-xBiScO3 and (1-x)PbTiO3-xBiScO3 using X-ray absorption spectroscopy

Science.gov (United States)

Blanchard, Peter E. R.; Grosvenor, Andrew P.

2018-05-01

The structural properties of (1-x)BaTiO3-xBiScO3 and (1-x)PbTiO3-xBiScO3 were investigated using powder X-ray diffraction and X-ray absorption spectroscopy. Diffraction measurements confirmed that substituting small amounts of BiScO3 into BaTiO3 initially stabilizes a cubic phase at x = 0.2 before impurity phases begin to form at x = 0.5. BiScO3 substitution also resulted in noticeable changes in the local coordination environment of Ti4+. X-ray absorption near-edge spectroscopy (XANES) analysis showed that replacing Ti4+ with Sc3+ results in an increase in the off-centre displacement of Ti4+ cations. Surprisingly, BiScO3 substitution has no effect on the displacement of the Ti4+ cation in the (1-x)PbTiO3-xBiScO3 solid solution.

Preparation, characterization and thermoelectric properties of a polyaniline matrix Ge{sub 0.94}Pb{sub 0.01}Bi{sub 0.05}Te composite

Energy Technology Data Exchange (ETDEWEB)

Ma, Sude; Zeng, Hao; Zhang, Changxing; Liu, Chun; Xu, Qian [Xihua Univ., Chengdu (China). Center for Advanced Materials and Energy; Zhang, Jianjun [Xihua Univ., Chengdu (China). School of Materials Science and Engineering

2017-11-01

In times of industrialization, much low temperature waste heat is released and no viable technology exists which can produce electricity from this low energy density heat. So the long sought-after class thermoelectric (TE) material which directly achieves conversion between thermal and electrical energy obtains much attention. However, the traditional TE materials are alloys of inorganic materials and expensive, and most of them have some level of toxicity, so the research on organic TE materials is very important. The polyaniline (PANI, i. e., a conducting polymer) and PANI matrix Ge{sub 0.94}Pb{sub 0.01}Bi{sub 0.05}Te composite material were prepared. The chemical structure, microstructure and thermoelectric properties were investigated by FTIR, XRD, SEM and ZEM. Results showed that the molecule chains in the PANI were not ranged very neatly, and Ge{sub 0.94}Pb{sub 0.01}Bi{sub 0.05}Te in the composite material formed interconnected network as 20 wt.-% Ge{sub 0.94}Pb{sub 0.01}Bi{sub 0.05}Te was added. Power factor of the composite material increased greatly while its ZT was almost two times of PANI. The addition of Ge{sub 0.94}Pb{sub 0.01}Bi{sub 0.05}Te was an effective method to increase the thermoelectric properties of PANI.

The nuclear design optimization of a Pb-Bi alloy cooled transmuter, PEACER-300

International Nuclear Information System (INIS)

Lim, Jae-Yong; Kim, Myung-Hyun

2006-01-01

A core design of lead-bismuth cooled fast reactor, PEACER-300 has been investigated to maximize its transmutation capability within safety criteria. Transmutation of minor actinide under a closed recycling was analyzed with assumption on decontamination factors in pyro-reprocessing plant data at reasonably high values. To acquire high transmutation performance, feed fuel composition, P/D ratio, active core height and fuel cycle strategy were changed. For preventing the fuel meting and guaranteeing long plant life-time, the number of fuel assembly array and normal operation temperature were decided. The optimized design parameter were chosen as of a flat core shape with 50 cm of active core height and 5 m core diameter, loaded with 17 x 17 arrayed fuel assemblies. A pitch to diameter ratio is 2.2, operating coolant temperature range is 300 deg. C to 400 deg. C, and core consists of 3 different enrichment zones with one year cycle length. Performance of designed core showed a high transmutation capability with support ratio of 2.085, large negative temperature feedback coefficients, and sufficient shutdown margin with 28 B 4 C control assemblies. (authors)

Quantification of the 214 Pb and 214 Bi decay products before and after to reach the secular equilibria with the 226 Ra

International Nuclear Information System (INIS)

Quintero P, E.; Rojas M, V.P.; Cervantes N, M.L.; Gaso P, M.I.

2002-01-01

In this work a comparison between the 226 Ra concentration and its decay products ( 214 Pb and 214 Bi) in soil samples is presented before and after that the decay mentioned products reach the equilibria with the radium. Moreover, the obtained daughter/father ratio is presented; and the correction factor for the calculus of the 214 Pb and 214 Bi quantification without being necessary to wait until that the secular equilibria has been established. For the quantification of the concentration of the three radionuclides the gamma spectrometry technique was used. (Author)

L-shell ionization studies of Pb and Bi with α particles

International Nuclear Information System (INIS)

Dhal, B.B.; Nandi, T.; Padhi, H.C.

1994-01-01

Ionization cross sections for the L subshells of Pb and Bi by α-particle bombardment (2.2--8.2 MeV) have been determined from the experimental data and the currently available radiative transition probabilities, fluorescence yields, and Coster-Kronig factors. The measured ionization cross sections and their ratios are compared with the results of ECPSSR calculations [ECPSSR denotes perturbed-stationary-state (PSS) theory with energy-loss (E), Coulomb deflection (C), and relativistic (R) corrections]. The measured individual cross sections for L 1 and L 2 subshells deviated in opposite directions from the theory, whereas their sum shows good agreement. The L 3 and total ionization cross sections obtained from the data also show good agreement with the ECPSSR theory. The ionization cross-section ratios σ L1 /σ L2 and σ L3 /σ L2 show large deviations from the ECPSSR theory. The experimental x-ray production cross-section ratios are found to be in better agreement with the theoretical results obtained from using ECPSSR ionization cross sections and the decay yield data of Xu and Xu [J. Phys. B 25, 695 (1992)] rather than those obtained from using the decay yield data of Krause [J. Phys. Chem. Ref. Data 8, 307 (1979)]. The x-ray production cross sections, however, are in better agreement with the theoretical results obtained from using the decay yield data of Krause. The measured centroid energy of the Lγ lines of Pb shows large deviations at high projectile energy, whereas for Bi large deviations are found at the low-energy region

Study on borate glass system containing with Bi2O3 and BaO for gamma-rays shielding materials: Comparison with PbO

International Nuclear Information System (INIS)

Kaewkhao, J.; Pokaipisit, A.; Limsuwan, P.

2010-01-01

In this work, the mass attenuation coefficients and shielding parameters of borate glass matrices containing with Bi 2 O 3 and BaO have been investigated at 662 keV, and compare with PbO in same glass structure. The theoretical values were calculated by WinXCom software and compare with experiential data. The results found that the mass attenuation coefficients were increased with increasing of Bi 2 O 3 , BaO and PbO concentration, due to increase photoelectric absorption of all glass samples. However, Compton scattering gives dominant contribution to the total mass attenuation coefficients for studied glass samples. Moreover the half value layers (HVL) of glass samples were also better than ordinary concretes and commercial window glass. These results reflecting that the Bi-based glass can use replace Pb in radiation shielding glass. In the case of Ba, may be can use at appropriate energy such as X-rays or lower.

Fluctuation Induced Conductivity Studies of 100 MeV Oxygen Ion Irradiated Pb Doped Bi-2223 Superconductors

NARCIS (Netherlands)

Banerjee, Tamalika; Kumar, Ravi; Kanjilal, D.; Ramasamy, S.

2000-01-01

We report on 100 MeV oxygen ion irradiation in Pb doped Bi-2223 superconductors. Resistivity measurements reveal that both grains as well as the grain boundaries are affected by such irradiation. An analysis of the excess conductivity has been made within the framework of Aslamazov-Larkin (AL) and

Analyzing power measurements for 209Bi(n,n) at 6 and 9 MeV and consistent dispersive optical-model analyses for n+209Bi and n+208Pb from -20 to +80 MeV

International Nuclear Information System (INIS)

Weisel, G.J.; Tornow, W.; Howell, C.R.; Felsher, P.D.; AlOhali, M.; Roberts, M.L.; Das, R.K.; Walter, R.L.; Mertens, G.

1996-01-01

High-accuracy measurements of A y (θ) data for elastic scattering for n+ 209 Bi have been performed at 6 and 9 MeV. The data are incorporated into a large database of σ(θ), A y (θ), and σ T for n+ 209 Bi covering the energy range 1.0 endash 80 MeV. A complementary database is constructed for n+ 208 Pb and a dispersive optical-model analysis is performed for both scattering systems while constraining many of the parameters to be identical for both systems. A good representation of both databases is obtained with conventional geometry and spin-orbit parameters. The 208 Pb model predicts quite well the measured energies of valence single-particle and single-hole bound states. Occupation probabilities and spectroscopic factors for the same bound states are also calculated. Finally, a fully constrained model is presented in which the only differences between the n+ 208 Pb and the n+ 209 Bi systems are the Fermi energy and the isospin dependence in the real volume potential. copyright 1996 The American Physical Society

Study of fission reactions induced by 4,6He and 7Li beams on 209Bi and 208Pb targets

Directory of Open Access Journals (Sweden)

Lukyanov S.M.

2013-12-01

Full Text Available Study of fission reactions induced by 4,6He and 7Li beams on 209Bi and 208Pb targets, leading to the production of 210,212A compound nuclei, was performed. It was shown that the fission excitation functions for the three reactions 4,6He + 209Bi and 7Li + 208Pb had similar behavior within the experimental error for a broad range of energy. More likely, halo structure of 6He is not reflected on the fission reaction mechanism. Otherwise, a large value of the fusion cross section was observed so far, as it could be expected in the case of weakly bound character of 6He projectile.

Rapid formation of the 110 K phase in Bi-Pb-Sr-Ca-Cu-O through freeze-drying powder processing

International Nuclear Information System (INIS)

Song, K.H.; Liu, H.K.; Dou, S.X.; Sorrell, C.C.

1990-01-01

This paper reports three techniques for processing Bi-Pb-Sr-Ca-Cu-O (BPSCCO) powders investigated: dry-mixing, sol-gel formation, and freeze-drying. It was found that sintering for 120 h at 850 degrees C is required to form nearly single-phase (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10-y by dry-mixing, whereas sintering for 30 h at 840 degrees C was sufficient to form the 110 K (2223) phase when freeze-drying was used. The sol-gel route was found to be intermediate in efficiency between these two techniques. Freeze-drying provided highly reactive, intimately mixed, and carbon-free precursors. The presence of carbonates in the uncalcined powders was the major cause of phase segregation and sluggishness of the 110 K phase formation

Analysis of tritium behaviour and recovery from a water-cooled Pb17Li blanket

International Nuclear Information System (INIS)

Malara, C.; Casini, G.; Viola, A.

1995-01-01

The question of the tritium recovery in water-cooled Pb17Li blankets has been under investigation for several years at JRC Ispra. The method which has been more extensively analysed is that of slowly circulating the breeder out from the blanket units and of extracting the tritium from it outside the plasma vacuum vessel by helium gas purging or vacuum degassing in a suited process apparatus. A computerized model of the tritium behaviour in the blanket units and in the extraction system was developed. It includes four submodels: (1) tritium permeation process from the breeder to the cooling water as a function of the local operative conditions (tritium concentration in Pb17Li, breeder temperature and flow rate); (2) tritium mass balance in each breeding unit; (3) tritium desorption from the breeder material to the gas phase of the extraction system; (4) tritium extraction efficiency as a function of the design parameters of the recovery apparatus. In the present paper, on the basis of this model, a parametric study of the tritium permeation rate in the cooling water and of the tritium inventory in the blanket is carried out. Results are reported and discussed in terms of dimensionless groups which describe the relative effects of the overall resistance on tritium transfer to the cooling water (with and without permeation barriers), circulating Pb17Li flow rate and extraction efficiency of the tritium recovery unit. The parametric study is extended to the recovery unit in the case of tritium extraction by helium purge or vacuum degassing in a droplet spray unit. (orig.)

Experimental Cross Sections for Reactions of Heavy Ions and 208Pb, 209Bi, 238U, and 248Cm Targets

International Nuclear Information System (INIS)

Patin, Joshua B.

2002-01-01

The study of the reactions between heavy ions and 208 Pb, 209 Bi, 238 U, and 248 Cm targets was performed to look at the differences between the cross sections of hot and cold fusion reactions. Experimental cross sections were compared with predictions from statistical computer codes to evaluate the effectiveness of the computer code in predicting production cross sections. Hot fusion reactions were studied with the MG system, catcher foil techniques and the Berkeley Gas-filled Separator (BGS). 3n- and 4n-exit channel production cross sections were obtained for the 238 U( 18 O,xn) 256-x Fm, 238 U( 22 Ne,xn) 260-x No, and 248 Cm( 15 N,xn) 263-x Lr reactions and are similar to previous experimental results. The experimental cross sections were accurately modeled by the predictions of the HIVAP code using the Reisdorf and Schaedel parameters and are consistent with the existing systematics of 4n exit channel reaction products. Cold fusion reactions were examined using the BGS. The 208 Pb( 48 Ca,xn) 256-x No, 208 Pb( 50 Ti,xn) 258-x Rf, 208 Pb( 51 V,xn) 259-x Db, 209 Bi( 50 Ti,xn) 259-x Db, and 209 Bi( 51 V,xn) 260-x Sg reactions were studied. The experimental production cross sections are in agreement with the results observed in previous experiments. It was necessary to slightly alter the Reisdorf and Schaedel parameters for use in the HIVAP code in order to more accurately model the experimental data. The cold fusion experimental results are in agreement with current 1n- and 2n-exit channel systematics

Structure of the displacement field of substitutionally dissolved Bi in Pb

International Nuclear Information System (INIS)

Seitz, E.

1975-03-01

In order to describe measurements of the coherent diffuse scattering of neutrons from Pb-Bi within the single defect approximation, Schumacher (1969) introduced a model in which the displacement field of the host lattice caused by a given Bismuth atom has trigonal symmetry. In an attempt to decide which model for the displacement field is correct, new measurements over an extended range were carried out with an improved resolution, using the D7 diffractometer at the High Flux Reactor in Grenoble. Taking the different resolutions into account, agreement between the present and previous data is good, both as to absolute intensity and scattering pattern. (orig./HPoe) [de

High-pressure anisotropic distortion of Pb3Bi2S6

DEFF Research Database (Denmark)

Olsen, Lars Arnskov; Balic Zunic, Tonci; Makovicky, Emil

2008-01-01

The compound Pb3Bi2S6 is investigated by X-ray diffraction on single crystals in a diamond-anvil cell between 0.0001 and 10.5 GPa. It undergoes a first-order phase transition at hydrostatic pressure between 3.7 and 4.9 Gpa. The space group symmetry changes from Bbmm to Pbnm, and the unit......-cell volume decreases by 4%. The transition is strongly anisotropic, with a contraction along one of the crystal axes by 16% and expansion along another one by 14%. This is a piezoplastic phase transition, a displacive pressure-induced phase transition with systematic shearing of atomic planes and a migration...

Quantification of the {sup 214} Pb and {sup 214} Bi decay products before and after to reach the secular equilibria with the {sup 226} Ra; Cuantificacion de los productos de decaimiento {sup 214} Pb y {sup 214} Bi antes y despues de alcanzar el equilibrio secular con el {sup 226} Ra

Energy Technology Data Exchange (ETDEWEB)

Quintero P, E.; Rojas M, V.P.; Cervantes N, M.L.; Gaso P, M.I. [Gerencia de Seguridad Radiologica, ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2002-07-01

In this work a comparison between the {sup 226} Ra concentration and its decay products ({sup 214} Pb and {sup 214} Bi) in soil samples is presented before and after that the decay mentioned products reach the equilibria with the radium. Moreover, the obtained daughter/father ratio is presented; and the correction factor for the calculus of the {sup 214} Pb and {sup 214} Bi quantification without being necessary to wait until that the secular equilibria has been established. For the quantification of the concentration of the three radionuclides the gamma spectrometry technique was used. (Author)

Separation of 210 Pb, 210 Bi and 210 Po by ion exchange and their liquid scintillation standardization

International Nuclear Information System (INIS)

Rodriguez, L.; Jimenez, A.; Grau, A.

1996-01-01

We applied the CIEMAT/NIST method and alpha/beta discrimination to ''210 Pb samples in equilibrium with its daughters, by preparing homogeneous and gel samples. The stability of samples was tested in different available cocktails, HiSafe''tm II, HiSafe''tmIII, Ultima-Gold''tm, Ultima-Gold''tmXR, Ultima-Gold''tmAB, Insta-Gel and e Insta-Gel II. Also we analyzed the disequilibrium of the radioactive chain ''210Pb+''210Bi+''210Po, achieving and excellent agreement between the results of the spectrum unfolding method and the experimental values. (Author) 13 refs

Effect of Pb and Ag additions on electrical properties Bi2Sr2Ca2Cu3Ox superconductive ceramics

International Nuclear Information System (INIS)

Reddi, B.V.; Uskov, E.M.

1990-01-01

The influence of Pb and Ag additions on the electrical properties of Bi 2 Sr 2 Ca 2 Cu 3 O x superconducting ceramics has been studied by Hall method. It was found that the Pb additions has more influence on the sample characteristics than Ag. It was found, that Hall EMF at 77 K equal to zero in the samples having some residue resistance

Monoclinic MB phase and phase instability in [110] field cooled Pb(Zn1/3Nb2/3)O3-4.5%PbTiO3 single crystals

Science.gov (United States)

Yao, Jianjun; Cao, Hu; Ge, Wenwei; Li, Jiefang; Viehland, D.

2009-08-01

We report the finding of a monoclinic MB phase in Pb(Zn1/3Nb2/3)O3-4.5%PbTiO3 single crystals. High precision x-ray diffraction investigations of [110] field cooled crystals have shown a transformation sequence of cubic(C)→tetragonal(T)→orthorhombic(O)→monoclinic(MB), which is different from that previously reported [A.-E. Renault et al., J. Appl. Phys. 97, 044105 (2005)]. Beginning in the zero-field-cooled condition at 383 K, a rhombohedral (R)→MB→O sequence was observed with increasing field. Coexisting MB and O phases were then found upon removal of field, which fully transformed to MB on cooling to room temperature.

A comparative neutronic analysis of 150MWe TRU burner according to the coolant alteration

International Nuclear Information System (INIS)

Yoo, J. W.; Kim, S. J.; Kim, Y. I.

2000-01-01

A comparative neutronic analysis has been conducted for the small TRU burner according to their coolant material. The use of Pb-Bi coolant gave a low burnup reactivity swing and negative or less positive coolant void coefficient with harder neutron spectrum. By a lower burnup reactivity swing and higher conversion ratio of Pb-Bi cooled core, the total amount of TRU consumption was found to be small compared with Na cooled core despite of the higher MA consumption ratio of Pb-Bi cooled core. However, Pb-Bi cooled reactor have a lager margin in the coolant void coefficient, so that a variable MA composition can be loaded in the core. Accordingly, even though the Pb-Bi cooled TRU burner has not effectiveness on TRU burning in the same geometry and material condition, a flexible MA loading is envisaged to result in 10 times larger MA burning amount, still preserving a low coolant void worth

Effect of Substitutional Pb Doping on Bipolar and Lattice Thermal Conductivity in p-Type Bi0.48Sb1.52Te₃.

Science.gov (United States)

Kim, Hyun-Sik; Lee, Kyu Hyoung; Yoo, Joonyeon; Youn, Jehun; Roh, Jong Wook; Kim, Sang-Il; Kim, Sung Wng

2017-07-06

Cation substitutional doping is an effective approach to modifying the electronic and thermal transports in Bi₂Te₃-based thermoelectric alloys. Here we present a comprehensive analysis of the electrical and thermal conductivities of polycrystalline Pb-doped p-type bulk Bi 0.48 Sb 1.52 Te₃. Pb doping significantly increased the electrical conductivity up to ~2700 S/cm at x = 0.02 in Bi 0.48-x Pb x Sb 1.52 Te₃ due to the increase in hole carrier concentration. Even though the total thermal conductivity increased as Pb was added, due to the increased hole carrier concentration, the thermal conductivity was reduced by 14-22% if the contribution of the increased hole carrier concentration was excluded. To further understand the origin of reduction in the thermal conductivity, we first estimated the contribution of bipolar conduction to thermal conductivity from a two-parabolic band model, which is an extension of the single parabolic band model. Thereafter, the contribution of additional point defect scattering caused by Pb substitution (Pb in the cation site) was analyzed using the Debye-Callaway model. We found that Pb doping significantly suppressed both the bipolar thermal conduction and lattice thermal conductivity simultaneously, while the bipolar contribution to the total thermal conductivity reduction increased at high temperatures. At Pb doping of x = 0.02, the bipolar thermal conductivity decreased by ~30% from 0.47 W/mK to 0.33 W/mK at 480 K, which accounts for 70% of the total reduction.

Development of heat resistant Pb-free joints by TLPS process of Ag and Sn-Bi-Ag alloy powders

Directory of Open Access Journals (Sweden)

Ohnuma I.

2012-01-01

Full Text Available TLPS (Transient Liquid Phase Sintering process is a candidate method of heat-resistant bonding, which makes use of the reaction between low-melting temperature powder of Sn-Bi base alloys and reactive powder of Ag. During heat treatment above the melting temperature of a Sn-Bi base alloy, the molten Sn-Bi reacts rapidly with solid Ag particles, which results in the formation of heat-resistant intermetallic compound (IMC. In this study, the TLPS properties between Sn-17Bi-1Ag (at.% powder with its liquidus temperature of 200°C and pure Ag powder were investigated. During differential scanning calorimetry (DSC measurement, an exothermic reaction and an endothermic reaction occurred, which correspond to the formation of the e-Ag3Sn IMC phase and the melting of the Sn-17Bi-1Ag alloy, respectively. After the overall measurement, the obtained reactant consists of the Ag3Sn-IMC and Bi-rich phases, both of which start melting above 250°C, with a small amount of the residual Sn-Bi eutectic phase. These results suggest that the TLPS process can be applied for Pb-free heatresistant bonding.

Apparent vanishing of ferroelectricity in nanostructured BiScO3PbTiO3

OpenAIRE

Amorín , H; Jiménez , R; Ricote , J; Hungría , T; Castro , A; Algueró , M

2010-01-01

Abstract Nanostructured ceramics of high-temperature piezoelectric 0.375BiScO 3 -0.625PbTiO 3 were prepared by spark plasma sintering of nanocrystalline powders obtained by mechanosynthesis. The macroscopic electrical properties were characterized on dense ceramics with decreasing average grain size down to 28 nm. Results indicate that the electric field is screened by the electrically insulating grain boundaries at the nanoscale, which needs to be considered when discussing size effects i...

The 208Pb(7Li,6He)209Bi reaction at 52 MeV

International Nuclear Information System (INIS)

Zeller, A.F.; Weisser, D.C.; Ophel, T.R.; Hebbard, D.F.

1979-11-01

Single proton transfers to low lying levels in 209 Bi from the 208 Pb(7Li, 6 He) reaction at 52 MeV have been measured and spectroscopic factors derived from an EFR-DWBA analysis. Relative spectroscopic factors are in good agreement with light ion results and previous heavy ion work. Absolute spectroscopic factors were generally too large and the peaks of the angular distributions were out of phase with the DWBA calculations by 1 0 - 4 0

Microstructure of laser floating zone (LFZ) textured (Bi,Pb)-Sr-Ca-Cu-O superconductor composites

International Nuclear Information System (INIS)

Fuente, G.F. de la; Ruiz, M.T.; Sotelo, A.; Larrea, A.; Navarro, R.

1993-01-01

Directionally solidified high temperature superconducting (Bi,Pb)-Sr-Ca-Cu-O pure ceramics and composites were obtained using a laser floating zone (LFZ) apparatus. The presence of secondary non-superconducting and metallic phases as well as their solidification habit have been analysed. The influence of the LFZ growth conditions and the precursor composition on the microstructure of the final products was studied using optical and electron microscopies. (orig.)

Shielded high-T{sub c} (Bi, Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes

Energy Technology Data Exchange (ETDEWEB)

Lelovic, M.; Eror, N.G. [Department of Materials Science, University of Pittsburgh, Pittsburgh, PA (United States); Balachandran, U.; Prorok, B. [Energy Technology Division, Argonne National Laboratory, Argonne, IL (United States); Selvamanickam, V.; Haldar, P. [Intermagnetics General Corporations, Latham, NY (United States); Talvacchio, J.; Young, R. [Science and Technology Center, Northrop Grumman, Pittsburgh, PA (United States)

1998-11-01

A new composite tape was fabricated in which the primary function of the central Ag-sheathed (Bi, Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) filaments was to conduct transport current. A YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (Y-123) thin film was deposited on the top of the Ag-sheathed Bi-2223 tape to shield the applied magnetic field and to protect the central Bi-2223 filaments. The critical current densities of the Y-123-coated, Ag-sheathed Bi-2223 tapes were better than those of an uncoated tape. However, the Y-123 thin film exhibited T{sub c} approx.= 72 K and a broad transition region that shifted the effect to lower temperatures. Furthermore, pole figure measurements showed widely spread a,b planes along the rolling direction, indicating high-angle grain boundaries that diminished the magnitude of the effect. Microstructural observations showed platelike grains of Y-123 with fine growth ledges in the thin film that was heat treated, in contrast with the microstructure of an as-coated thin film that showed large twinned grains. From the processing point of view, the results showed that heat treating Y-123 thin film according to the Bi-2223 tape schedule was compatible with and beneficial for Y-123. These preliminary results may provide a basis for further improvements in processing of long-length Bi-2223 tapes for high-field applications. (author)

Coordination chemistry of the 212Pb/212Bi nuclear transformation: Alpha-emitting radiopharmaceuticals

International Nuclear Information System (INIS)

Parks, N.J.; Harris, W.R.; Keen, C.L.; Cooper, S.R.

1992-07-01

Subdivisions of this project are: (a) the synthesis of prototypical thiolate and dithiocarbamate based hexacoordinate complexes, (b) radiochemical engineering for generation of no-carrier-added lead and bismuth radioelements, (c) the first isolation of bismuth-binding proteins from in vivo studies with cyclotron produced 205/206 Bi tracer, and (d) initial development of transport mechanisms for the intracellular radiobiological study of alpha emitting bismuth, and (e) the initiation of chemical equilibrium studies and biochemical pathways with cyclotron-produced, no-carrier-added, 203 Pb (T 1/2 = 51 hr)

Separation of 210Pb, 210Bi and 210Po by ion exchange and their Iiquid scintillation standardization

International Nuclear Information System (INIS)

Rodriguez, L.; Jimenez, A.; Grau, A.

1996-01-01

We applied the CIEMAT/NIST method and alpha/beta discrimination to ''210Pb samples in equilibrium with its daughters, by preparing homogeneous and gel samples. The stability of samples was tested in different available cocktails, HiSafe''TM II, HiSafe''TM III, Ultima-Gold''TM, Ultima-Gold''TM XR, Ultima-Gold''TM AB, Insta-Gel''R and e Insta-Gel''R lI. Also we analyzed the disequilibrium of the radioactive chain 210Pb+210Bi+210Po, achieving an excellent agreement between the results of the spectrum unfolding method and the experimental values. (Author) 13 refs

Pb solubility of the high-temperature superconducting phase Bi2Sr2Ca2Cu3O10+d

International Nuclear Information System (INIS)

Kaesche, S.; Majewski, P.; Aldinger, F.

1994-01-01

For the nominal composition of Bi 2.27x Pb x Sr 2 Ca 2 Cu 3 O 10+d the lead content was varied from x=0.05 to 0.45. The compositions were examined between 830 degrees C and 890 degrees C which is supposed to be the temperature range over which the so-called 2223 phase (Bi 2 Sr 2 Ca 2 Cu 3 O 10+d ) is stable. Only compositions between x=0.18 to 0.36 could be synthesized in a single phase state. For x>0.36 a lead containing phase with a stoichiometry of Pb 4 (Sr,Ca) 5 CuO d is formed, for x 2 Sr 2 CaCu 2 O 8+d and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830 degrees C to 890 degrees C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase

Mineralogical data on angelaite, Cu2AgPbBiS4, from the Los Manantiales District, Chubut, Argentina

DEFF Research Database (Denmark)

Topa, D.; Paar, W.H.; Putz, H.

2010-01-01

Angelaite, ideally Cu2AgPbBiS4, occurs as a hypogene mineral in polymetallic ores at the Ángela groups of veins in the mining district of Los Manantiales, in the province of Chubut, Argentina. The new mineral species is predominantly associated with pyrite, sphalerite, chalcopyrite, hematite...

Dielectric and magnetic properties of Ba-, La- and Pb-doped Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 perovskite ceramics

Directory of Open Access Journals (Sweden)

Radheshyam Rai

2014-04-01

Full Text Available The multiferroic Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3, (where M = Ba (DB, La (DL and Pb (DP has been synthesized by using solid-state reaction technique. Effects of Ba, La and Pb substitution on the structure, electrical and ferroelectric properties of Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 samples have been studied by performing X-ray diffraction, dielectric and magnetic measurements. The crystal structures of the ceramic samples have a tetragonal phase. The vibrating sample magnetometer (VSM measurement shows a significant change in the magnetic properties of Ba-doped Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 as compared to La- and Pb-doped ceramics. It is seen that coercive field (HC and remanent magnetization (MR increases with Ba-doped ceramics but decreases for La- and Pb-doped ceramics.

Structural and electronic properties of Pb-doped Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}: Comparison of LDA and GGA calculations

Energy Technology Data Exchange (ETDEWEB)

Camargo-Martínez, J.A., E-mail: jcamargo@unitropico.edu.co [Grupo de Investigación en Ciencias Básicas, Aplicación e Innovación - CIBAIN, Fundación Universitaria Internacional del Trópico Americano– Unitrópico, Yopal, Casanare (Colombia); Martínez-Pieschacón, D.J. [Departamento de Ciencias Básicas, Universidad Santo Tomás, Tunja, Boyaca (Colombia); Baquero, R. [Departamento de Física, CINVESTAV-IPN, Av. IPN 2508, 07360, México (Mexico)

2017-04-15

Highlights: • We present for the first time the effects of Pb doping on structural and electronic properties of Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Bi2223) using GGA, compared with LDA results. • We found the Pb concentration for which the Bi–O pockets disappear from the Fermi Surface in the Bi2223 compound using GGA and LDA, respectively. - Abstract: We use Density Functional Theory to study the effects on the crystal structure and the electronic band structure of substituting Pb for Bi in Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}. We further use the Local Density Approximation (LDA) and the Generalized Gradient Approximation (GGA). The Virtual Crystal Approximation (VCA) was used to account for the substitution. We found that GGA reproduces better the lattice parameters although in both cases the internal coordinates were reproduced with some uncertainties. We further looked at the behavior of the so called Bi–O pockets, some electronic states that originate on the Bi–O planes and that appear on the Fermi surface (FS) in contradiction to the experimental evidence. We found that LDA and GGA differ on that subject. With 26% Pb and using LDA, the Bi–O pockets run away from the FS. But when GGA is used, it is needed up to 35% Pb to make the Bi–O pockets disappear from the FS. In the last case, once the Bi–O pockets are removed from the FS, we get a very good agreement with angular resolved photo-emission (ARPES) and nuclear magnetic resonance (NMR) experiments.

An Overview of Corrosion Issues for the Design and Operation of High-Temperature Lead- and Lead-Bismuth-Cooled Reactor Systems

International Nuclear Information System (INIS)

Ballinger, Ronald G.; Lim, Jeongyoun

2004-01-01

The viability of advanced Pb- or Pb-Bi-cooled fast reactor systems will depend on the development of classes of materials that can operate over the temperature range 650-1200 deg. C. We briefly review the current state of the technology concerning the interaction of Pb and Pb-Bi alloys with structural materials. We then identify the key challenges to successful use of materials in these systems and suggest a path forward to the development of new materials and operating methods to allow higher-temperature operation. Our focus is on the necessary trade-offs that must be considered and how these trade-offs influence R and D choices. Our analysis suggests that three classes of materials will be needed for successful deployment of a lead-alloy-cooled reactor system. A lower-temperature qualified material will be necessary for the pressure boundary. The structural and cladding materials will require 1000 deg. C- and 1200 deg. C-class materials. The 1000 deg. C-class material will be exposed to the 1000 deg. C coolant. The 1200 deg. C-class material will be required for the cladding and structural materials in the core region. The higher-temperature material will be required to accommodate anticipated temperature transients from potential accident scenarios, such as a loss of flow

Magnetoelectric properties of Pb free Bi2FeTiO6: A theoretical investigation

Science.gov (United States)

Patra, Lokanath; Ravindran, P.

2018-05-01

The structural, electronic, magnetic and ferroelectric properties of Pb free double perovskite multiferroic Bi2FeTiO6 are investigated using density functional theory within the general gradient approximation (GGA) method. Our structural optimization using total energy calculations for different potential structures show a minimum energy for a non-centrosymmetric rhombohedral structure with R3c space group. Bi2FeTiO6 is found to be an antiferromagnetic insulator with C-type magnetic ordering with bandgap value of 0.3 eV. The calculated magnetic moment of 3.52 μB at Fe site shows the high spin arrangement of 3d electrons which is also confirmed by our orbital projected density of states analysis. We have analyzed the characteristics of bonding present between the constituents of Bi2FeTiO6 with the help of calculated partial density of states and Born effective charges. The ground state of the nearest centrosymmetric structure is found to be a G-type antiferromagnet with half metallicity showing that by the application of external electric field we can not only get a polarized state but also change the magnetic ordering and electronic structure in the present compound indicating strong magnetoelectric coupling. The cation sites the coexistence of Bi 6s lone pair (bring disproportionate charge distribution) and Ti4+ d0 ions which brings covalency produces off-center displacement and favors a non-centrosymmetric ground state and thus ferroelectricity. Our Berry phase calculation gives a polarization of 48 µCcm-2 for Bi2FeTiO6.

Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis

International Nuclear Information System (INIS)

Farahany, S.; Ourdjini, A.; Idrsi, M.H.; Shabestari, S.G.

2013-01-01

Highlights: • Combined effect of Bi, Sb and Sr additions, and cooling condition was evaluated. • Two different scenarios of recalecense in response to cooling rate were observed. • Fraction solid increased in the order of Sr > Bi > Sb, corresponds to Si morphologies. • Only Bi decreased the nucleation temperature of Al 2 Cu eutectic phase. - Abstract: Al–Si and Al–Cu eutectic phases strongly affect the properties of Al–Si–Cu cast alloys. The characteristic parameters of these two eutectic phases with addition of bismuth, antimony and strontium under different cooling rates (0.6–2 °C/s) were investigated in ADC12 alloy using in situ thermal analysis. Results show that additives affect the Al–Si phase more than the Al–Cu (Al 2 Cu) phase. Addition elements showed two different scenarios in response to cooling rate in terms of recalescence of the Al–Si eutectic phase. Both Bi and Sb caused an increase in recalescence with increased cooling rate but Sr addition reduced the recalescence. Additions of Sb and Sr increased the nucleation temperature of Al 2 Cu, but addition of Bi produced an opposite effect. There seems to be relationship between the solidification temperature range and fraction solid of Al–Si and Al 2 Cu eutectic phases. As the cooling rate increases the fraction solid of Al–Si decreased and that of Al 2 Cu increased

Design development and manufacturing sequence of the European water-cooled Pb-17Li test blanket module

Energy Technology Data Exchange (ETDEWEB)

Futterer, M.A.; Bielak, B.; Deffain, J.P.; Giancarli, L.; Li Puma, A.; Salavy, J.F.; Szczepanski, J. [CEA Saclay, Gif-sur-Yvette (France). FDRN/DMT/SERMA; Dellis, C. [CEA Grenoble, DTA-CEREM/SGM, Grenoble (France); Nardi, C. [ENEA Frascati, ERG-FUS-TECN-MEC, Frascati (Italy); Schleisiek, K. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Reaktorsicherheit

1998-09-01

In 1996, the European Community started the development of a water-cooled Pb17Li blanket test module for ITER. First tests are currently scheduled to start with the beginning of the basic performance phase prior to D-T operation. The test module is designed to be a representative for a DEMO breeding blanket and relies on the liquid alloy Pb-17Li as both tritium breeder and neutron multiplier material, and water at PWR pressure and temperature as coolant. The structural material is martensitic steel. The straight, box-like structure of this blanket confines a pool of liquid Pb-17Li which is slowly circulated for ex-situ tritium extraction and lithium adjustment. The box and the Pb-17Li pool are separately cooled, the former with toroido-radial tubes, the latter with a bundle of double-walled U-tubes, equally made of martensitic steel and equipped with a permeation barrier. This paper presents the latest design and three manufacturing schemes with different degrees of technology. Advanced techniques such as solid or powder HIP are proposed to provide design flexibility. With a 3D neutronics analysis, the power and tritium generation were determined. (orig.) 11 refs.

Evolution of fast reactor core spectra in changing a heavy liquid metal coolant by molten PB-208

Energy Technology Data Exchange (ETDEWEB)

Blokhin, D. A.; Mitenkova, E. F. [Nuclear Safety Inst., Russian Academy of Sciences, B. Tulskaya 52, Moscow, 115119 (Russian Federation); Khorasanov, G. L.; Zemskov, E. A.; Blokhin, A. I. [State Scientific Center, Russian Federation, Inst. of Physics and Power Engineering, Bondarenko Square 1, Obninsk, 249033 (Russian Federation)

2012-07-01

In the paper neutron spectra of fast reactor cooled with lead-bismuth or lead-208 are given. It is shown that in changing the coolant from lead-bismuth to lead-208 the core neutron spectra of the fast reactor FR RBEC-M are hardening in whole by several percents when a little share of low energy neutrons (5 eV - 50 keV) is slightly increasing. The shift of spectra to higher energies permits to enhance the fuel fission while the increased share of low energy neutrons provides more effective conversion of uranium-238 into plutonium due to peculiarity of {sup 238}U neutron capture cross section. Good neutron and physical features of molten {sup 208}Pb permit to assume it as perspective coolant for fast reactors and accelerator driven systems. The one-group cross sections of neutron radiation capture, {sigma}(n,g), by {sup 208}Pb, {sup 238}U, {sup 99}Tc, mix of lead and bismuth, {sup nat}Pb-Bi, averaged over neutron spectra of the fast reactor RBEC-M are given. It is shown that one-group cross sections of neutron capture by material of the liquid metal coolant consisted from lead enriched with the stable lead isotope, {sup 208}Pb, are by 4-7 times smaller {sigma}(n,g) for the coolant {sup nat}Pb-Bi. The economy of neutrons in the core cooled with {sup 208}Pb can be used for reducing reactor's initial fuel load, increasing fuel breeding and transmutation of long lived fission products, for example {sup 99}Tc. Good neutron and physical features of lead enriched with {sup 208}Pb permit to consider it as a perspective low neutron absorbing coolant for fast reactors and accelerator driven systems. (authors)

Competition from the ν/sub e/ 208Pb → 208Bi e- reaction in a search for ν/sub μ/-bar → ν/sub e/-bar oscillation

International Nuclear Information System (INIS)

Toevs, J.W.; Kruse, H.W.

1981-01-01

Inverse beta-decay reactions produced by electron neutrinos may compete with muon neutrino reactions in experiments utilizing the neutrino flux from a beam stop. The cross section and angular distribution for one such reaction, ν/sub e/ 208 Pb → 208 Bi e - , have been calculated with the aid of the results of an investigation of 208 Pb (p,n) 208 Bi at low momentum transfer. The implications of this reaction on an experiment to study neutrino oscillation are discussed. 2 figures

Band structure of metallic pyrochlore ruthenates Bi2Ru2O7 and Pb2Ru2O/sub 6.5/

International Nuclear Information System (INIS)

Hsu, W.Y.; Kasowski, R.V.; Miller, T.; Chiang, T.

1988-01-01

The band structure of Bi 2 Ru 2 O 7 and Pb 2 Ru 2 O/sub 6.5/ has been computed self-consistently from first principles for the first time by the pseudofunction method. We discover that the 6s bands of Bi and Pb are very deep and unlikely to contribute to the metallic behavior as previously believed. The unoccupied 6p bands, however, are only several eV above the Fermi energy and are mixed with the Ru 4d band at the Fermi surface via the framework O atoms, leading to band conduction and delocalized magnetic moments. The predicted location of the 6s bands and the location and width of the O 2p band are confirmed by synchrotron radiation and ultraviolet electron spectroscopy of single crystals

Influence of the post-annealing cooling rate on the superconducting and mechanical properties of LFZ textured Bi-2212 rods

International Nuclear Information System (INIS)

Natividad, E; Gomez, J A; Angurel, L A; Salazar, A; Pastor, J Y; Llorca, J

2002-01-01

Laser floating zone textured Bi 2 Sr 2 CaCu 2 O 8+δ (Bi-2212) thin rods were manufactured and subjected to a two-step annealing process at 870 deg C and 801 deg C in air. It was found that the subsequent cooling process led to marked changes in electrical properties. Three cooling rates were tested: (i) quenching in liquid nitrogen, (ii) cooling in air inside an alumina tube and (iii) cooling inside the furnace. The results showed that the faster the cooling rate, the higher the normal state resistivity. The T c distribution across the rods was also affected by the cooling rate, but no large differences were observed in the magnitude of the critical current at 77 K since the homogeneity of furnace-cooled samples compensated for the higher outer J c values of fast-cooled ones. The mechanical properties (elastic modulus and flexure strength) were not influenced by the cooling rate, but the samples quenched in liquid nitrogen were often cracked by thermal shock. The elastic modulus and the flexure strength of the rods were deteriorated by the existence of an outer ring of compact, poorly textured material and by the large bubbles found in the central region of the rod. Samples processed by a two-step texturing process which reduced the thickness of the outer ring and eliminated the bubbles had better electrical and mechanical properties

Nucleation behavior of melted Bi films at cooling rates from 101 to 104 K/s studied by combining scanning AC and DC nano-calorimetry techniques

International Nuclear Information System (INIS)

Xiao, Kechao; Vlassak, Joost J.

2015-01-01

Highlights: • We proposed a general data reduction scheme that combines scanning AC and DC calorimetry results for the study of reaction kinetics. • Calorimetry measurements at cooling rates ranging from 30 K/s to 20,000 K/s were achieved. • Upon initial melting, the Bi thin-film sample breaks up into thousands of isolated islands, and highly repeatable nucleation behavior is observed. • The nucleation rate of melted Bi is calculated, which can be well described by classical nucleation theory over a wide range of cooling rates. - Abstract: We study the nucleation behavior of undercooled liquid Bi at cooling rates ranging from 10 1 to 10 4 K/s using a combination of scanning DC and AC nano-calorimetry techniques. Upon initial melting, the Bi thin-film sample breaks up into silicon nitride-coated isolated islands. The number of islands in a typical sample is sufficiently large that highly repeatable nucleation behavior is observed, despite the stochastic nature of the nucleation process. We establish a data reduction technique to evaluate the nucleation rate from DC and AC calorimetry results. The results show that the driving force for the nucleation of melted Bi is well described by classical nucleation theory over a wide range of cooling rates. The proposed technique provides a unique and efficient way to examine nucleation kinetics with cooling rates over several orders of magnitude. The technique is quite general and can be used to evaluate reaction kinetics in other materials

High dielectric permittivity in the microwave region of SrBi2Nb2O9 (SBN) added La2O3, PbO and Bi2O3, obtained by mechanical alloying

Science.gov (United States)

Rocha, M. J. S.; Silva, P. M. O.; Theophilo, K. R. B.; Sancho, E. O.; Paula, P. V. L.; Silva, M. A. S.; Honorato, S. B.; Sombra, A. S. B.

2012-08-01

This paper presents the microwave dielectric properties and a structural study of SrBi2Nb2O9 (SBN) added La2O3, PbO or Bi2O3 obtained by a solid state procedure. High-energy mechanical milling was used to reduce the particle size, which allows for a better shaping of the green body and an increased reactivity. The mechanical milling activation process produced a reduced sintering temperature in the material, decreasing the loss of the volatile elements and controlling the growth of the grain that is produced when a high temperature is required to obtain dense ceramics. The incorporation of La3+, or Pb2+, or Bi3+ of different amounts (0, 3, 5, 10 and 15 wt%) was used to improve the densification without changing the crystal structure, since with a low doping content these ions can occupy the A site of the perovskite blocks; they can also occupy the Bi3+ sites in Bi2O3 layers. A single orthorhombic phase was formed after calcination at 800 °C for 2 h. X-ray diffraction, Fourier transformation, infrared and Raman spectroscopy have been carried out in order to investigate the effects of doping on SBN. The dielectric permittivity (ɛ‧r) and loss in the microwave region (2-4 GHz) of SBN ceramics with additions of Bi2O3, La2O3 and PbO were studied. Higher values of permittivity (ɛr‧ = 154.6) have been obtained for the SBN added La (15 wt%) a lower loss (tg δ = 0.01531) was also achieved in the SBN added La (15 wt%) sample with PVA and TEOS, respectively. The samples that showed the highest dielectric permittivities were all lanthanum doped, all with values of permittivity above 90. A comparative study associated with different types of binders was completed (with glycerin, PVA and TEOS). This procedure allowed us to obtain phases at lower temperatures than usually appear in the literature. The microwave dielectric properties (permittivity and loss) in the region 2-4 GHz, were studied for all samples. The structural and microwave dielectric properties of SBN show a

Electrical and thermal characteristics of Bi2212/Ag HTS coils for conduction-cooled SMES

Science.gov (United States)

Hayakawa, N.; Noguchi, S.; Kurupakorn, C.; Kojima, H.; Endo, F.; Hirano, N.; Nagaya, S.; Okubo, H.

2006-06-01

In this paper, we investigated the electrical and thermal performance of conduction-cooled Bi2212/Ag HTS coils with 4K-GM cryocooler system. First, we measured the critical current Ic for different ambient temperatures T0 at 4.2 K - 40 K. Experimental results revealed that Ic increased with the decrease in T0 and was saturated at T0 account of temperature dependence of specific heat and thermal conductivity of the materials. We also measured the temperature rise of Bi2212/Ag HTS coil for different continuous current levels at T0 = 4.8 K. Experimental results revealed the criterion of thermal runaway, which was discussed in terms of heat generation and propagation in the test coil.

Development of Pb-rich (Bi, Pb) sub 3 Sr sub 2 Ca sub 2 Cu sub 1 O sub x phase during reformation of lead doped 2223 superconducting phase from melt quenched glass. [BiPbSrCaCuO

Energy Technology Data Exchange (ETDEWEB)

Oezkan, N; Glowacki, B A [IRC in Superconductivity, Univ. of Cambridge (United Kingdom)

1992-05-01

The reformation process of the lead doped superconducting 2223 phase from the melt quenched glass was investigated. It was shown that during the crystallisation of the glass a new lead rich phase, Bi{sub 0.5}Pb{sub 3}Sr{sub 2}Ca{sub 2}Cu{sub 1}O{sub x}, was formed and severe copper segregation was observed. The volume fraction of the high Tc 2223 phase increased with annealing time for an annealing temperature of 840degC. A glass sample annealed at 840degC for 150 h showed two superconducting transitions Tc = 107 K and Tc = 70 K. (orig.).

Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis

Energy Technology Data Exchange (ETDEWEB)

Farahany, S., E-mail: saeedfarahany@gmail.com [Department of Materials Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru (Malaysia); Ourdjini, A.; Idrsi, M.H. [Department of Materials Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru (Malaysia); Shabestari, S.G. [Center of Excellence for High Strength Alloys Technology (CEHSAT), School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), 16846-13114 Tehran (Iran, Islamic Republic of)

2013-05-10

Highlights: • Combined effect of Bi, Sb and Sr additions, and cooling condition was evaluated. • Two different scenarios of recalecense in response to cooling rate were observed. • Fraction solid increased in the order of Sr > Bi > Sb, corresponds to Si morphologies. • Only Bi decreased the nucleation temperature of Al{sub 2}Cu eutectic phase. - Abstract: Al–Si and Al–Cu eutectic phases strongly affect the properties of Al–Si–Cu cast alloys. The characteristic parameters of these two eutectic phases with addition of bismuth, antimony and strontium under different cooling rates (0.6–2 °C/s) were investigated in ADC12 alloy using in situ thermal analysis. Results show that additives affect the Al–Si phase more than the Al–Cu (Al{sub 2}Cu) phase. Addition elements showed two different scenarios in response to cooling rate in terms of recalescence of the Al–Si eutectic phase. Both Bi and Sb caused an increase in recalescence with increased cooling rate but Sr addition reduced the recalescence. Additions of Sb and Sr increased the nucleation temperature of Al{sub 2}Cu, but addition of Bi produced an opposite effect. There seems to be relationship between the solidification temperature range and fraction solid of Al–Si and Al{sub 2}Cu eutectic phases. As the cooling rate increases the fraction solid of Al–Si decreased and that of Al{sub 2}Cu increased.

Study of SrBi4Ti4O15 (SBTi) dielectric properties of doped PbO

International Nuclear Information System (INIS)

Rodrigues Junior, C.A.; Silva Filho, J.M.; Freitas, D.B.; Oliveira, R.G.M.; Sombra, B.; Sales, J.C.

2012-01-01

The ceramic SrBi 4 Ti 4 O 15 (SBTI), cation-deficient perovskite A 5 B 4 O 15 , was prepared by the method of solid state reaction and then doped with PbO (in the range 2-10% by weight). The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance spectroscopy at room temperature. The X-ray analysis was performed by the Rietveld refinement. The micrographs of the samples show globular-shaped grains (doped PbO). The dielectric properties: dielectric constant (Κ' or έ) and dielectric loss tangent (tan δ), were measured at room temperature in the frequency range 100 Hz - 1 MHz dielectric properties of these 1 MHz sample doped with 10 % PbO showed the dielectric constant Κ'= 168.34 and dielectric loss tangent tanδ, = 7,1.10 -2 . These results show a good possibility of miniaturization of electronic devices such as capacitors. (author)

The crystal structure of Cu_1.6Pb_1.6Bi_6.4S₁₂, a new 44.8 Å derivative of the bismuthinite-aikinite solid-solution series

DEFF Research Database (Denmark)

Topa, Dan; Balic-Zunic, Tonci; Makovicky, Emil

2000-01-01

Cu1.6Pb1.6Bi6.4S12, aikinite-bismuthinite derivative, crystal structure, Felbertal, scheelite deposit, Austria......Cu1.6Pb1.6Bi6.4S12, aikinite-bismuthinite derivative, crystal structure, Felbertal, scheelite deposit, Austria...

Tritium transport in the water cooled Pb-17Li blanket concept of DEMO

International Nuclear Information System (INIS)

Reiter, F.; Tominetti, S.; Perujo, A.

1992-01-01

The code TIRP has been used to calculate the time dependence of tritium inventory and tritium permeation into the coolant and into the first wall boxes in the water cooled Pb-17Li blanket concept of DEMO. The calculations have been performed for the martensitic steel MANET and the austenitic steel AISI 316L as blanket structure materials, for water or helium cooling and for convective or no motion of the liquid breeder in the blanket. Tritium inventories are rather low in blankets with MANET structure and higher in those with AISI 316L structure. Tritium permeation rates are too high in both blankets. Further calculations on tritium inventory and permeation are therefore presented for blankets with TiC permeation barriers of 1 μm thickness on various surfaces of the blanket structure and for blankets with any permeation barriers in function of their thickness, tritium diffusivities, tritium surface recombination rates and atomic densities. These last calculations have been performed for a blanket with coatings on the outer surfaces of the blanket and with a tritium residence time of 10 4 s and for a blanket with coatings on both sides of the cooling tubes and stagnant Pb-17Li in the blanket. The second case for a blanket with MANET structure presents a very interesting solution for tritium recovery by permeation into and pumping from the first wall boxes. (orig.)

Effects of Bi(Zn2/3Nb1/3)O3 Modification on the Relaxor Behavior and Piezoelectricity of Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics.

Science.gov (United States)

Liu, Zenghui; Wu, Hua; Paterson, Alisa; Ren, Wei; Ye, Zuo-Guang

2017-10-01

Relaxor lead magnesium niobate (PMN)-based materials exhibit complex structures and unusual properties that have been puzzling researchers for decades. In this paper, a new ternary solid solution of Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 -Bi(Zn 2/3 Nb 1/3 )O 3 (PMN-PT-BZN) is prepared in the form of ceramics, and the effects of the incorporation of BZN into the PMN-PT binary system are investigated. The crystal structure favors a pseudocubic symmetry and the relaxor properties are enhanced as the concentration of BZN increases. The relaxor behavior and the related phase transformations are studied by dielectric spectroscopy. A phase diagram mapping out the characteristic temperatures and various states is established. Interestingly, the piezoelectricity of the PMN-PT ceramics is significantly enhanced by the BZN substitution, with an optimal value of d 33 reaching 826 pC/N for 0.96[0.7Pb(Mg 1/3 Nb 2/3 )O 3 -0.3PbTiO 3 ]-0.04Bi(Zn 2/3 Nb 1/3 )O 3 . This paper provides a better understanding of the relaxor ferroelectric behavior, and unveils a new relaxor-based ternary system as piezoelectric materials potentially useful for electromechanical transducer applications.

Comment to: "Particle-hole symmetry breaking in the pseudogap state of Bi2201"

OpenAIRE

Panas, Itai

2010-01-01

Shen et al. [1] recently reported on ARPES data from Pb-Bi2201 revealing both particle-hole symmetry breaking and pronounced spectral broadening, which they interpret to be indicative of spatial symmetry breaking without long-range order at the opening of the pseudogap. Here is demonstrated how their results could be interpreted to reflect static and dynamic inhomogeneous crystal fields causing inter-band transfer of holes upon cooling below T*. Possible relevance to formation of charge carri...

AC losses in (Bi,Pb) 2Sr 2Ca 2Cu 3O x tapes

Science.gov (United States)

D'Anna, G.; Indenbom, M. V.; André, M.-O.; Benoit, W.; Grivel, J.-C.; Hensel, B.; Flükiger, R.

1994-05-01

A double peak structure is observed in the AC losses of (Bi,Pb) 2Sr 2Ca 2Cu 3O x silver-sheathed tapes using a torsion-pendulum oscillator. The low-temperature peak is associated to the intragrain flux expulsion, while the high-temperature peak results from a macroscopic current path around the whole sample due to a well-coupled fraction of the grains. The flux pinning by the dislocations forming small-angle grain boundaries is suggested to control the transport current.

Highly oriented Bi-system bulk sample prepared by a decomposition-crystallization process

International Nuclear Information System (INIS)

Xi Zhengping; Zhou Lian; Ji Chunlin

1992-01-01

A decomposition-crystallization method, preparing highly oriented Bi-system bulk sample is reported. The effects of processing parameter, decomposition temperature, cooling rate and post-treatment condition on texture and superconductivity are investigated. The method has successfully prepared highly textured Bi-system bulk samples. High temperature annealing does not destroy the growing texture, but the cooling rate has some effect on texture and superconductivity. Annealing in N 2 /O 2 atmosphere can improve superconductivity of the textured sample. The study on the superconductivity of the Bi(Pb)-Sr-Ca-Cu-O bulk material has been reported in numerous papers. The research on J c concentrates on the tape containing the 2223 phase, with very few studies on the J c of bulk sample. The reason for the lack of studies is that the change of superconducting phases at high temperatures has not been known. The authors have reported that the 2212 phase incongruently melted at about 875 degrees C and proceeded to orient the c-axis perpendicular to the surface in the process of crystallization of the 2212 phase. Based on that result, a decomposition-crystallization method was proposed to prepare highly oriented Bi-system bulk sample. In this paper, the process is described in detail and the effects of processing parameters on texture and superconductivity are reported

Thermal behavior of GeO{sub 2} doped PbO-B{sub 2}O{sub 3}-ZnO-Bi{sub 2}O{sub 3} glasses

Energy Technology Data Exchange (ETDEWEB)

Cheng Yin [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Xiao Hanning [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)]. E-mail: hnxiao@hnu.cn; Guo Weiming [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Guo Wenming [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)

2006-05-15

PbO-B{sub 2}O{sub 3}-ZnO-Bi{sub 2}O{sub 3} glass is a representative system for vacuum and electronic sealing. Effects of GeO{sub 2} on thermal properties of the glass have been investigated in this paper. Activation energy for crystallization, glass structure, the type of crystals were characterized by differential scanning calorimetry, infrared spectroscopy, X-ray diffraction and optical microscopy. Results indicate that the addition of GeO{sub 2} (0.4-2 wt.%) to PbO-B{sub 2}O{sub 3}-ZnO-Bi{sub 2}O{sub 3} glass can suppress crystallization of the glass and decrease the sealing temperature. With the increase of GeO{sub 2} content, germanate crystals were revealed, resulting in a slight increase of sealing temperature. When the content of GeO{sub 2} is 0.7 wt.%, the glass possesses the highest stability and lowest sealing temperature (400 deg. C), which is desirable for low-temperature sealing. The coefficient of thermal expansion of PbO-B{sub 2}O{sub 3}-ZnO-Bi{sub 2}O{sub 3} glass was measured by dilatometry. The result shows that the coefficient of thermal expansion of the glass increases with the content of GeO{sub 2}. The adjustability of the coefficient of thermal expansion would expand the applications of PbO-B{sub 2}O{sub 3}-ZnO-Bi{sub 2}O{sub 3} glass. A flexural strength of 28.3 MPa was obtained at the GeO{sub 2} content of 0.7 wt.%, showing good mechanical property for sealing process.

Conductivity and superconductivity of (Bi,Pb)-Sr-Ca-Cu-O

International Nuclear Information System (INIS)

Gazda, M.; Kusz, B.; Klimczuk, T.; Natali, R.; Stizza, S.

2007-01-01

The (Bi,Pb)-Sr-Ca-Cu-O glass-ceramics may be considered as disordered metal and superconductor. Depending on the heat treatment conditions the materials are either composed of the oval grains of the 2212 or 2201 phases embedded in the insulating matrix or they mainly contain the 2212 plate-like crystallites weakly connected one with another. The materials have large resistivity and usually large negative temperature coefficient of resistivity (TCR). The granular and disordered character of the materials is also reflected in their superconducting properties. Both the normal-state and superconducting properties correlate one with another. The glass-ceramic samples were obtained by annealing the amorphous solid at temperatures between 840 and 860 deg. C. The measurements of the temperature dependence of resistivity in annealed samples were carried out with the conventional four-terminal method in a temperature range from 3 to 300 K

The half-life of 207Bi and decays of 211At and 211Po

International Nuclear Information System (INIS)

Yanokura, M.; Kudo, H.; Nakahara, H.; Miyano, K.; Ohya, S.; Nitoh, O.

1978-01-01

The half-life of 207 Bi was obtained from the genetic relation between 207 Po and 207 Bi, and between 211 At and 207 Bi. The half-life was found to be 33.4 +- 0.8 y. The half-life of 207 Po was determined to be 5.81 +- 0.04 h by following the decay of the characteristic γ-rays from 207 Po. The half-life of 211 At was determined to be 7.23 +- 0.02 h by following the decay of γ-rays and α-particles from 211 At and 211 Po. The half-lives determined in the present work for 207 Po and 211 At agree with the literature although the half-life of 207 Bi differs considerably from the currently accepted value of 38 y. The branching ratio of 211 At decaying through EC and α-decay modes was determined together with the branching ratios of the three α-particles emitted from 211 Po. (Auth.)

Influence of B4C-doping and high-energy ball milling on phase formation and critical current density of (Bi,Pb)-2223 HTS

Science.gov (United States)

Margiani, N. G.; Mumladze, G. A.; Adamia, Z. A.; Kuzanyan, A. S.; Zhghamadze, V. V.

2018-05-01

In this paper, the combined effects of B4C-doping and planetary ball milling on the phase evolution, microstructure and transport properties of Bi1.7Pb0.3Sr2Ca2Cu3Oy(B4C)x HTS with x = 0 ÷ 0.125 were studied through X-ray diffraction (XRD), scanning electron microscopy (SEM), resistivity and critical current density measurements. Obtained results have shown that B4C additive leads to the strong acceleration of high-Tc phase formation and substantial enhancement in Jc. High-energy ball milling seems to produce a more homogeneous distribution of refined doped particles in the (Bi,Pb)-2223 HTS which results in an improved intergranular flux pinning and better self-field Jc performance.

The off-stoichiometric Bi1.8Pb0.3Sr2Ca2Cu3.3Ox target for thin films

International Nuclear Information System (INIS)

Harabor, A.; Deletter, M.

1996-01-01

X-ray diffraction (XRD), EDAX, AC susceptibility and resistivity measurements has been used as characterization methods for the Bi-2223 monophase target with the starting stoichiometry Bi 1.8 Pb 0.3 Sr 2 Ca 2 Cu 3.3 O x . Pressure parameter is playing an important role in obtaining good superconducting properties for this compound. Critical currents and activation energy has been calculated from susceptibility and magnetoresistivity curves, respectively. The results could be interpreted in terms of TAPS and TAFF models. (orig.)

The crystal structure of emilite, Cu_10.7Pb_10.7Bi_21.3S₄₈, the second 45 Å derivative of the bismuthinite-aikinite solid-solution series

DEFF Research Database (Denmark)

Balic-Zunic, Tonci; Topa, Dan; Makovicky, Emil

2002-01-01

geology, emilite, Cu10.7Pb10.7Bi21.3S48, aikinite-bismuthinite derivative, crystal structure, Felbertal, scheelite deposit, Austria......geology, emilite, Cu10.7Pb10.7Bi21.3S48, aikinite-bismuthinite derivative, crystal structure, Felbertal, scheelite deposit, Austria...

Activities of AREVA Med. Extraction and purification of the 212Pb isotope from Thorium for radio-immunotherapy

International Nuclear Information System (INIS)

Miquel, Pierre

2012-01-01

After having recalled the definition of radio-immunotherapy (RIT) and the benefits of alpha RIT for the treatment of some cancers, this document explains the choice of the 212-Pb isotope instead of the 212-Bi isotope (the first one has a longer half-life than the second). The Pb isotope in fact progressively transforms itself into the Bi isotope. The production process is evoked with its important steps. A second part reports the first clinic tests performed in the Alabama Centre for the treatment of different cancer (breast, colon, ovarian, pancreas, stomach). Processes and doses are discussed

Separation of 210Pb, 210Bi and 210Po by ion exchange and their Iiquid scintillation standardization; Separacion del 210Pb, 210Bi y 2I0Po mediante columna de cambio ionico y su calibracion por centelleo liquido

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, L.; Jimenez, A.; Grau, A.

1996-07-01

We applied the CIEMAT/NIST method and alpha/beta discrimination to ''210Pb samples in equilibrium with its daughters, by preparing homogeneous and gel samples. The stability of samples was tested in different available cocktails, HiSafe''TM II, HiSafe''TM III, Ultima-Gold''TM, Ultima-Gold''TM XR, Ultima-Gold''TM AB, Insta-Gel''R and e Insta-Gel''R lI. Also we analyzed the disequilibrium of the radioactive chain 210Pb+210Bi+210Po, achieving an excellent agreement between the results of the spectrum unfolding method and the experimental values. (Author) 13 refs.

Pb solubility of the high-temperature superconducting phase Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d}

Energy Technology Data Exchange (ETDEWEB)

Kaesche, S.; Majewski, P.; Aldinger, F. [Max-Planck-Institut fuer Metallforschung, Stuttgart (Germany)] [and others

1994-12-31

For the nominal composition of Bi{sub 2.27x}Pb{sub x}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d} the lead content was varied from x=0.05 to 0.45. The compositions were examined between 830{degrees}C and 890{degrees}C which is supposed to be the temperature range over which the so-called 2223 phase (Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+d}) is stable. Only compositions between x=0.18 to 0.36 could be synthesized in a single phase state. For x>0.36 a lead containing phase with a stoichiometry of Pb{sub 4}(Sr,Ca){sub 5}CuO{sub d} is formed, for x<0.18 mainly Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+d} and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830{degrees}C to 890{degrees}C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase.

Creep Behavior of a Sn-Ag-Bi Pb-Free Solder

Science.gov (United States)

Vianco, Paul; Rejent, Jerome; Grazier, Mark; Kilgo, Alice

2012-01-01

Compression creep tests were performed on the ternary 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) Pb-free alloy. The test temperatures were: −25 °C, 25 °C, 75 °C, 125 °C, and 160 °C (± 0.5 °C). Four loads were used at the two lowest temperatures and five at the higher temperatures. The specimens were tested in the as-fabricated condition or after having been subjected to one of two air aging conditions: 24 hours at either 125 °C or 150 °C. The strain-time curves exhibited frequent occurrences of negative creep and small-scale fluctuations, particularly at the slower strain rates, that were indicative of dynamic recrystallization (DRX) activity. The source of tertiary creep behavior at faster strain rates was likely to also be DRX rather than a damage accumulation mechanism. Overall, the strain-time curves did not display a consistent trend that could be directly attributed to the aging condition. The sinh law equation satisfactorily represented the minimum strain rate as a function of stress and temperature so as to investigate the deformation rate kinetics: dε/dtmin = Asinhn (ασ) exp (−ΔH/RT). The values of α, n, and ΔH were in the following ranges (±95% confidence interval): α, 0.010–0.015 (±0.005 1/MPa); n, 2.2–3.1 (±0.5); and ΔH, 54–66 (±8 kJ/mol). The rate kinetics analysis indicated that short-circuit diffusion was a contributing mechanism to dislocation motion during creep. The rate kinetics analysis also determined that a minimum creep rate trend could not be developed between the as-fabricated versus aged conditions. This study showed that the elevated temperature aging treatments introduced multiple changes to the Sn-Ag-Bi microstructure that did not result in a simple loss (“softening”) of its mechanical strength.

Evidence for charge transfer in Bi-based superconductors studied by positron annihilation

International Nuclear Information System (INIS)

Tang, Z.; Wang, S.J.; Gao, X.H.; Ce, G.C.; Zhao, Z.X.

1993-01-01

We have measured Doppler-broadening annihilation radiation (DBAR) spectra and positron lifetimes in normal and superconducting states for three kinds of Bi-based superconductors: Bi2212, Pb-doped Bi2223, Pb- and F-doped Bi2223. The difference spectra after deconvolution between two states show a sharpening effect with increasing temperature; the F-doped sample has the greatest amplitude in difference spectra but nearly the same positron lifetimes as the Pb-doped sample. The results are interpreted in terms of charge transfer between the Cu-O and Bi-O planes. The role of oxygen defects in charge transfer is discussed. (orig.)

Photon mass attenuation coefficients of a silicon resin loaded with WO3, PbO, and Bi2O3 Micro and Nano-particles for radiation shielding

Science.gov (United States)

Verdipoor, Khatibeh; Alemi, Abdolali; Mesbahi, Asghar

2018-06-01

Novel shielding materials for photons based on silicon resin and WO3, PbO, and Bi2O3 Micro and Nano-particles were designed and their mass attenuation coefficients were calculated using Monte Carlo (MC) method. Using lattice cards in MCNPX code, micro and nanoparticles with sizes of 100 nm and 1 μm was designed inside a silicon resin matrix. Narrow beam geometry was simulated to calculate the attenuation coefficients of samples against mono-energetic beams of Co60 (1.17 and 1.33 MeV), Cs137 (663.8 KeV), and Ba133 (355.9 KeV). The shielding samples made of nanoparticles had higher mass attenuation coefficients, up to 17% relative to those made of microparticles. The superiority of nano-shields relative to micro-shields was dependent on the filler concentration and the energy of photons. PbO, and Bi2O3 nanoparticles showed higher attenuation compared to WO3 nanoparticles in studied energies. Fabrication of novel shielding materials using PbO, and Bi2O3 nanoparticles is recommended for application in radiation protection against photon beams.

Search for 1/sup +/ states in /sup 208/Pb by /sup 208/Pb(p, p') and the /sup 209/Bi(d, /sup 3/He) reactions

Energy Technology Data Exchange (ETDEWEB)

Ikegami, H.; Yamazaki, T.; Morinobu, S.; Katayama, I.; Fujiwara, M. [Osaka Univ., Suita (Japan). Research Center for Nuclear Physics; Ikegami, Hidetsugu; Muraoka, Mitsuo [eds.; Osaka Univ., Suita (Japan). Research Center for Nuclear Physics

1980-01-01

Proton inelastic scattering experiment on Pb-208 was carried out by using 65 MeV protons from a 230 cm AVF cyclotron, to study the 1/sup +/ states in Pb-208. The momentum of outgoing protons was analyzed by the magnetic spectrograph RAIDEN. The 7.06 MeV state was very weakly excited. In order to identify 1/sup +/ states from the angular distributions of the inelastic scattering, the proton spectra scattered from the well known 1/sup +/ state in Pb-206 were measured. because of masking by a strong neighbouring peak, the differential cross section of the 1/sup +/ state was measured only at two points. The comparison between the experiment and distorted wave calculation for the 1/sup +/ state (1.703 MeV) in Pb-206 was made, and the results implied that the 1/sup +/ states in Pb-208 would also be weakly excited even if these states are good particle-hole states, Next, Bi-209 (d, He-3) reaction experiment was performed. The comparison between the preliminary results and the calculated results based on the shell model is shown in a figure. The overall agreement between the experimental and theoretical results seems to be good. However, the existence of the 1/sup +/ state has not been confirmed, and will be confirmed in the next step to be done.

Structural and Moessbauer Effect Studies of 0.7Bi0.95Dy0.05FeO3-0.3Pb(Fe0.5Nb0.5)O3 Multiferroic

International Nuclear Information System (INIS)

Stoch, A.; Kulawik, J.; Stoch, P.; Maurin, J.; Zachariasz, P.

2011-01-01

0.7Bi 0.95 Dy 0.05 FeO 3 -0.3Pb(Fe 0.5 Nb 0.5 )O 3 is a multiferroic material which exhibits ferroelectric and antiferromagnetic ordering. In this paper the way of the synthesis of 0.7Bi 0.95 Dy 0.05 FeO 3 -0.3Pb(Fe 0.5 Nb 0.5 )O 3 is presented. The detailed X-ray and Moessbauer effect studies were done and crystal and hyperfine interaction parameters were obtained. (authors)

Coordination chemistry of the sup 212 Pb/ sup 212 Bi nuclear transformation: Alpha-emitting radiopharmaceuticals

Energy Technology Data Exchange (ETDEWEB)

Parks, N.J.; Harris, W.R.; Keen, C.L.; Cooper, S.R.

1992-07-01

Subdivisions of this project are: (a) the synthesis of prototypical thiolate and dithiocarbamate based hexacoordinate complexes, (b) radiochemical engineering for generation of no-carrier-added lead and bismuth radioelements, (c) the first isolation of bismuth-binding proteins from in vivo studies with cyclotron produced {sup 205/206}Bi tracer, and (d) initial development of transport mechanisms for the intracellular radiobiological study of alpha emitting bismuth, and (e) the initiation of chemical equilibrium studies and biochemical pathways with cyclotron-produced, no-carrier-added, {sup 203}Pb (T{sub 1/2} = 51 hr).

Superconducting energy gap of BaPb/sub 1-//sub x/Bi/sub x/O3

International Nuclear Information System (INIS)

Schlesinger, Z.; Collins, R.T.; Scott, B.A.; Calise, J.A.

1988-01-01

We report the first infrared measurement of the superconducting energy gap of BaPb/sub 1-//sub x/Bi/sub x/O 3 . In our polycrystalline samples with T/sub c/≅9.5 K (x≅0.2) we obtain 2Δ≅3.2kT/sub c/, roughly in agreement with the weak-coupling Bardeen-Cooper-Schrieffer prediction, 2Δ = 3.5kT/sub c/, and with tunneling measurements of the gap. We do not observe any structure above the gap energy associated with strong coupling

Excellent corrosion resistance of 18Cr-20Ni-5Si steel in liquid Pb-Bi

International Nuclear Information System (INIS)

Kurata, Y.; Futakawa, M.

2004-01-01

The corrosion properties of three austenitic steels with different Si contents were studied under oxygen-saturated liquid Pb-Bi condition for 3000 h. The three austenitic steels did not exhibit appreciable dissolution of Ni and Cr at 450 deg. C. At 550 deg. C, the thick ferrite layer produced by dissolution of Ni and Cr was found in JPCA and 316SS with low Si contents while the protective oxide film composed of Si and O was formed on 18Cr-20Ni-5Si steel and prevented dissolution of Ni and Cr

Fission threshold determination of 209Bi and sup(204,206,207,208)Pb by electrofission

International Nuclear Information System (INIS)

Tuerck, D.

1975-01-01

At the Darmstadt electron linear accelerator the cross sections for the electrofission of 209 Bi were measured for electron energies between 24 and 70 MeV, for the separated lead isotopes sup(204,206,207,208)Pb between 38 and 50 MeV. For the determination of the fission thresholds the cross sections were examined by the virtuel photon method using calculations in first Born approximation for the point nucleus with Coulomb wave functions. The analytic functions fitting the fission probability were based on level densities after the Fermi-gas-model. (orig./WL) [de

Superconducting properties of Pb nanoislands on Pb/Ag/Si(111) studied by a "3He-cooled scanning tunnelling microscope in magnetic fields at variable temperatures

International Nuclear Information System (INIS)

Leon Vanegas, Alvaro Augusto

2015-01-01

A "3He-cooled scanning tunneling microscope was used to investigate the superconducting properties of Pb single layers on Si(111) and Ag/Si(111) and Pb islands on Pb/Ag/Si(111) at temperatures between 0.38 K and 6 K and in magnetic fields of up to 3 T. The spectroscopy measurements show that in contrast with Pb/Si(111), a single Pb layer on Ag/Si(111) is non-superconducting. The superconductivity of Pb islands on Pb/Ag/Si(111) was characterized as a function of temperature and magnetic field. A non-uniform critical magnetic field for suppression of superconductivity on islands of uniform thickness but sitting of regions of different height is reported. The proximity induced superconductivity on the wetting layer surrounding a Pb island on Pb/Ag/Si(111) was studied. Spatially resolved, magnetic field dependent spectroscopy uncovers a non-trivial reduction of the extension of the induced superconductivity with increasing field. A breakdown of the proximity effect for fields larger than 0.5 T is found. Tunneling spectroscopy reveals a strong decrease of the proximity length with increasing temperature. This is ascribed to the thermally induced broadening of the electronic density of states in the tip used in the STM experiment.

Ferroelectric properties of sandwich structured (Bi, La)4T3O12/Pb(Zr, Ti)O3/ (Bi, La)4Ti3O12 thin films on Pt/Ti/SiO2/Si substrates

International Nuclear Information System (INIS)

Bao Dinghua; Wakiya, Naoki; Shinozaki, Kazuo; Mizutani, Nobuyasu

2002-01-01

Sandwich structured (Bi, La) 4 Ti 3 O 12 /Pb(Zr, Ti)O 3 /(Bi, La) 4 Ti 3 O 12 thin films were fabricated on Pt/Ti/SiO 2 /Si substrates, with the intention of simultaneously utilizing the advantages of both (Bi, La) 4 Ti 3 O 12 (BLT) and Pb(Zr, Ti)O 3 (PZT) thin films such as non-fatigue behaviours of BLT and good ferroelectric properties of PZT. Both BLT and PZT layers were prepared by a chemical solution deposition technique. The experiments demonstrated that the sandwich structure showed fatigue-free characteristics at least up to 10 10 switching bipolar pulse cycles under 8 V and excellent retention properties. The sandwich structured thin films also exhibited well-defined hysteresis loops with a remanent polarization (2P r ) of 8.8 μC cm -2 and a coercive field (E c ) of 47 kV cm -1 . The room-temperature dielectric constant and dissipation factor were 210 and 0.031, respectively, at a frequency of 100 kHz. These results suggest that this sandwich structure is a promising material combination for ferroelectric memory applications. (author)

Sem-EDAX'S Application For Characterization Of Superconductor Material Of (Bi,Pb)-Sr-Ca-Cu-O

International Nuclear Information System (INIS)

Handayani, Ari; Wuryanto; Prambudi, Bambang

1996-01-01

The microstructure and composition analysis of superconductor material of (Bi,Pb)-Sr-Ca-Cu-O which were synthesized by two different processes (CA and CD Process) by varying the sintering time, i.e. 20,60 and 100 hours were done by using SEM-EDAX method. The standard sample of superconductor material of Bi-Sr-Ca-Cu-O with 1112, 2212 and 2223 phase from Stream has been used for comparison, At 25 kV, the composition analysis showed that, at 20 and 60 hours of sintering, a mixture of phases existed while 100 hours of sintering resulted in a phase close to phase 2223. The result of microstructure observation showed significant differences. At synthesized CA process, 100 hours of sintering gives bigger and clearer platelet microstructure shape than that given by 20 and 60 hours of sintering. Also from the synthesized CD process, the 60 and 100 hours of sintering gives bigger and clearer platelet microstructure shape than that given by the 20 hours of sintering

Superconducting properties of Pb nanoislands on Pb/Ag/Si(111) studied by a {sup 3}He-cooled scanning tunnelling microscope in magnetic fields at variable temperatures

Energy Technology Data Exchange (ETDEWEB)

Leon Vanegas, Alvaro Augusto

2015-02-26

A {sup 3}He-cooled scanning tunneling microscope was used to investigate the superconducting properties of Pb single layers on Si(111) and Ag/Si(111) and Pb islands on Pb/Ag/Si(111) at temperatures between 0.38 K and 6 K and in magnetic fields of up to 3 T. The spectroscopy measurements show that in contrast with Pb/Si(111), a single Pb layer on Ag/Si(111) is non-superconducting. The superconductivity of Pb islands on Pb/Ag/Si(111) was characterized as a function of temperature and magnetic field. A non-uniform critical magnetic field for suppression of superconductivity on islands of uniform thickness but sitting of regions of different height is reported. The proximity induced superconductivity on the wetting layer surrounding a Pb island on Pb/Ag/Si(111) was studied. Spatially resolved, magnetic field dependent spectroscopy uncovers a non-trivial reduction of the extension of the induced superconductivity with increasing field. A breakdown of the proximity effect for fields larger than 0.5 T is found. Tunneling spectroscopy reveals a strong decrease of the proximity length with increasing temperature. This is ascribed to the thermally induced broadening of the electronic density of states in the tip used in the STM experiment.

Depth profiles of production yields of natPb(p, xn206,205,204,203,202 Bi reactions using 100-MeV proton beam

Directory of Open Access Journals (Sweden)

Oranj Leila Mokhtari

2017-01-01

Full Text Available In this study, results of the experimental study on the depth profiles of production yields of 206,205,204,203,202Bi radio-nuclei in the natural Pb target irradiated by a 100-MeV proton beam are presented. Irradiation was performed at proton linac facility (KOMAC in Korea. The target, irradiated by 100-MeV protons, was arranged in a stack consisting of natural Pb, Al, Au foils and Pb plates. The proton beam intensity was determined by activation analysis method using 27Al(p, 3p1n24Na, 197Au(p, p1n196Au, and 197Au(p, p3n194Au monitor reactions and also using dosimetry method by a Gafchromic film. The production yields of produced Bi radio-nuclei in the natural Pb foils and monitor reactions were measured by gamma-ray spectroscopy. Monte Carlo simulations were performed by FLUKA, PHITS, and MCNPX codes and compared with the measurements in order to verify validity of physical models and nuclear data libraries in the Monte Carlo codes. A fairly good agreement was observed between the present experimental data and the simulations by FLUKA, PHITS, and MCNPX. However, physical models and the nuclear data relevant to the end of range of protons in the codes need to be improved.

The EC conceptual design proposal of a water-cooled convertible blanket for ITER

International Nuclear Information System (INIS)

Giancarli, L.; Proust, E.; Baraer, L.; Bielak, B.; Raepsaet, X.; Salavy, J.F.; Sedano, L.; Szczepanski, J.; Quintric-Bossy, J.; Severi, Y.

1993-01-01

For several years the EC laboratories have developed breeding blankets for DEMO. From this experience, it has been derived a proposal of tritium breeding blanket for the Extended Performance Phase (EPP) of ITER. The general basic ideas are the following: (i) the switch from the shielding blanket used during the BPP to the breeding blanket for the EPP should not require segments replacement ('convertible' blanket): (ii) its use should not have significant impact on the Basic Performance Phase (BPP); (iii) design and used materials should assure good safety standards and acceptable public perception; (iv) the blanket coolant should be compatible with the coolant required in the high heat-flux components (e.g. divertor, etc.; (v) the required R and D should fit with the ITER time schedule; (vi) the blanket should be able to withstand large power excursions and to accept long downtimes. The proposed design consists of a water-cooled liquid metal blanket, using the eutectic Pb-17Li during the EPP and a non-breeding Pb-alloy (Pb-18Mg or Pb-50Bi) during the BPP. Each segment is basically formed by a box containing the alloy, cooled by an array of poloidal hairpin-type cooling tubes and reinforced by toroidal and radial stiffeners. The coolant tubes are double-walled tubes allowing leak detections. The selected First Wall (FW) is a toroidally-drilled steel plate with brazed water-cooling U-tube. The structural material is austenitic stainless steel (316L(N)) which limits the maximum acceptable neutron fluence to about 1 MWa/m 2 . The advantages of using other structural materials requiring longer leadtimes, such as ferritic/martensitic steels, are also briefly discussed

Structural and Moessbauer Effect Studies of 0.5Bi0.95Dy0.05FeO3-0.5Pb(Fe2/3W1/3)O3 Multiferroic

International Nuclear Information System (INIS)

Stoch, A.; Zachariasz, P.; Stoch, P.; Kulawik, J.; Maurin, J.

2011-01-01

A polycrystalline ceramic of 0.5Bi 0.95 Dy 0.05 FeO 3 -0.5Pb(Fe 2/3 W 1/3 )O 3 was synthesized from a solid-state reaction method. At room temperature material exhibits both magnetic and electric dipolar properties simultaneously. Detailed X-ray diffraction analysis and Moessbauer effect studies have been done to determine the crystallographic structure and magnetic properties of 0.5Bi 0.95 Dy 0.05 FeO 3 -0.5Pb(Fe 2/3 W 1/3 )O 3 . T N temperature was estimated at around 600 K. (authors)

Conceptual design of a 20-kA current lead using forced-flow cooling and Ag-alloy-sheathed Bi-2223 high-temperature superconductors

International Nuclear Information System (INIS)

Heller, R.; Hull, J.R.

1994-01-01

High-temperature superconductors (HTSs), consisting of Bi-2223 HTS tapes sheathed with Ag alloys are proposed for a 20-kA current lead for the planned stellarator WENDELSTEIN 7-X. Forced-flow He cooling is used, and 4-K He cooling of the whole lead as well as 60-K He cooling of the copper part of the lead, is discussed. Power consumption and behavior in case of loss of He flow are given

Phase transition in vortex system in Bi2212:Pb monocrystal

CERN Document Server

Uspenskaya, L S; Rakhmanov, A L

2002-01-01

Penetration of the magnetic flux into the (Bi sub 0 sub . sub 8 sub 4 Pb sub 0 sub . sub 1 sub 6) sub 2 sub . sub 2 Sr sub 2 CaCu sub 2 O sub 8 high-temperature superconductor monocrystal is studied thorough the magnetooptical method in the crossed magnetic fields. It is shown that the magnetic flux penetration in the low-temperature areas is anisotropic: it moves primarily along the magnetic field, applied in the sample plane, and this anisotropy grows with the temperature growth. At the temperature of T sub m = 54 +- 2 K there takes place sharp change in the character of the magnetic field penetration into the superconductor, whereby the direction of the flux motion discontinues to be dependent on the direction and value of the magnetic field applied in the sample plane. This effect is interpreted within the frames of representations on the phase transition in the vortex system connected with a sharp decrease in the correlations of the vortex position in the different CuO-planes

Comparison of reactions for the production of 258,257Db: 208Pb(51V,xn) and 209Bi(50Ti,xn)

Energy Technology Data Exchange (ETDEWEB)

Gates, Jacklyn M.; Nelson, Sarah L.; Gregorich, Kenneth E.; Dragojevic, Irena; Dullmann, Christoph E.; Ellison, Paul A.; Folden III, Charles M.; Garcia, Mitch A.; Stavsetra, Liv; Sudowe, Ralf; Hoffman, Darleane C.; Nitsche, Heino

2008-09-29

Excitation functions for the 1n and 2n exit channels of the 208Pb(51V,xn)259-xDb reaction were measured. A maximum cross section of the 1n exit channel of 2070+1100/-760 pb was measured at an excitation energy of 16.0 +- 1.8 MeV. For the 2n exit channel, a maximum cross section of 1660+450/-370 pb was measured at 22.0 +- 1.8 MeV excitation energy. The 1n excitation function for the 209Bi(50Ti,n)258Db reaction was remeasured, resulting in a cross section of 5480+1750/-1370 pb at an excitation energy of 16.0 +- 1.6 MeV, in agreement with previous values [F. P. Hebberger, et al., Eur. Phys. J. A 12, 57 (2001)]. Differences in cross section maxima are discussed in terms of the fusion probability below the barrier.

Adsorption-controlled growth of ferroelectric PbTiO{sub 3} and Bi{sub 4}Ti{sub 3}O{sub 12} films for nonvolatile memory applications by MBE

Energy Technology Data Exchange (ETDEWEB)

Theis, C.D.; Yeh, J.; Schlom, D.G. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Materials Science and Engineering; Hawley, M.E.; Brown, G.W. [Los Alamos National Lab., NM (United States). Center for Materials Science

1997-09-01

Epitaxial PbTiO{sub 3} and Bi{sub 4}Ti{sub 3}O{sub 12} thin films have been grown on (100) SrTiO{sub 3} and (100) LaAlO{sub 3} substrates by reactive molecular beam epitaxy (MBE). Titanium is supplied to the film in the form of shuttered bursts each containing a one monolayer dose of titanium atoms for the growth of PbTiO{sub 3} and three monolayers for the growth of Bi{sub 4}Ti{sub 3}O{sub 12}. Lead, bismuth, and ozone are continuously supplied to the surface of the depositing film. Growth of phase pure, c-axis oriented epitaxial films with bulk lattice constants is achieved using an overpressure of these volatile species. With the proper choice of substrate temperature (600--650 C) and ozone background pressure (P{sub O{sub 3}} = 2 {times} 10{sup {minus}5} Torr), the excess of the volatile metals and ozone desorb from the surface of the depositing film leaving a phase-pure stoichiometric crystal. The smooth PbTiO{sub 3} surface morphology revealed by atomic force microscopy (AFM) suggests that the PbTiO{sub 3} films grow in a layer-by-layer fashion. In contrast the Bi{sub 4}Ti{sub 3}O{sub 12} films contain islands which evolve either continuously or around screw dislocations via a spiral-type growth mechanism.

Magnetoelectric and electric measurements of the (1-x)BiFeO{sub 3}–(x)Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} solid solutions

Energy Technology Data Exchange (ETDEWEB)

Bochenek, D., E-mail: dariusz.bochenek@us.edu.pl [University of Silesia, Faculty of Computer Science and Material Science, Institute of Technology and Mechatronics, 12, Żytnia St., 41–200, Sosnowiec (Poland); Niemiec, P. [University of Silesia, Faculty of Computer Science and Material Science, Institute of Technology and Mechatronics, 12, Żytnia St., 41–200, Sosnowiec (Poland); Guzdek, P. [Institute of Electron Technology Cracow Division, 39, Zabłocie St., Cracow, 30-701 (Poland); Wzorek, M. [Institute of Electron Technology, Al. Lotników 32/46, 02-668, Warsaw (Poland)

2017-07-01

In the paper ferro–electro–magnetic (1-x)BiFeO{sub 3}-(x)Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} (BF-PFN) solid solutions were obtained (containing the percentage BF/PFN: 60/40 and 70/30). Individual components of the solid solution were prepared by follows methods: synthesizing a powder BF was performed by calcining the simple oxides (Bi{sub 2}O{sub 3}, Fe{sub 2}O{sub 3}), and synthesizing a powder PFN was carried out by calcining a mixture of complex oxides (FeNbO{sub 4}, PbO). Compaction of synthesized and mixed BiFeO{sub 3}, PbFe{sub 1/2}Nb{sub 1/2}O{sub 3} powders was carried out by free sintering methods. X–ray, microstructure, dielectric, magnetic and magnetoelectric studies, DC electrical conductivity and electrical hysteresis loop were carried out. Magnetoelectric effect measurements performed at room temperature showed coupling between electric and magnetic subsystem of the BF–PFN solid solutions. - Highlights: • BF-PFN samples have a densely packed microstructure, with well crystallized grains. • Bi atoms possibly migrate from BF toward PFN component during sintering. • BF-PFN have a diffuse character of the ferroelectric–paraelectric phase transition. • Magnetoelectric coefficient (α{sub ME}) for BF-PFN is higher, than for pure BF. • The α{sub ME} for BF-PFN is about three times higher than for 0.75BiFeO{sub 3}–0.25BaTiO{sub 3}.

Pebble Bed Reactors Design Optimization Methods and their Application to the Pebble Bed Fluoride Salt Cooled High Temperature Reactor (PB-FHR)

Science.gov (United States)

Cisneros, Anselmo Tomas, Jr.

The Fluoride salt cooled High temperature Reactor (FHR) is a class of advanced nuclear reactors that combine the robust coated particle fuel form from high temperature gas cooled reactors, direct reactor auxillary cooling system (DRACS) passive decay removal of liquid metal fast reactors, and the transparent, high volumetric heat capacitance liquid fluoride salt working fluids---flibe (33%7Li2F-67%BeF)---from molten salt reactors. This combination of fuel and coolant enables FHRs to operate in a high-temperature low-pressure design space that has beneficial safety and economic implications. In 2012, UC Berkeley was charged with developing a pre-conceptual design of a commercial prototype FHR---the Pebble Bed- Fluoride Salt Cooled High Temperature Reactor (PB-FHR)---as part of the Nuclear Energy University Programs' (NEUP) integrated research project. The Mark 1 design of the PB-FHR (Mk1 PB-FHR) is 236 MWt flibe cooled pebble bed nuclear heat source that drives an open-air Brayton combine-cycle power conversion system. The PB-FHR's pebble bed consists of a 19.8% enriched uranium fuel core surrounded by an inert graphite pebble reflector that shields the outer solid graphite reflector, core barrel and reactor vessel. The fuel reaches an average burnup of 178000 MWt-d/MT. The Mk1 PB-FHR exhibits strong negative temperature reactivity feedback from the fuel, graphite moderator and the flibe coolant but a small positive temperature reactivity feedback of the inner reflector and from the outer graphite pebble reflector. A novel neutronics and depletion methodology---the multiple burnup state methodology was developed for an accurate and efficient search for the equilibrium composition of an arbitrary continuously refueled pebble bed reactor core. The Burnup Equilibrium Analysis Utility (BEAU) computer program was developed to implement this methodology. BEAU was successfully benchmarked against published results generated with existing equilibrium depletion codes VSOP

Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb Bi at 450 and 550 °C

Science.gov (United States)

Kurata, Y.; Futakawa, M.; Saito, S.

2005-08-01

Static corrosion tests of various steels were conducted in oxygen-saturated liquid Pb-Bi eutectic at 450 °C and 550 °C for 3000 h to study the effects of temperature and alloying elements on corrosion behavior in liquid Pb-Bi. Corrosion depth decreases at 450 °C with increasing Cr content in steels regardless of ferritic/martensitic steels or austenitic steels. Appreciable dissolution of Ni and Cr does not occur in the three austenitic steels at 450 °C. Corrosion depth of ferritic/martensitic steels also decreases at 550 °C with increasing Cr content in steels whereas corrosion depth of austenitic steels, JPCA and 316SS becomes larger due to ferritization caused by dissolution of Ni at 550 °C than that of ferritic/martensitic steels. An austenitic stainless steel containing about 5%Si exhibits fine corrosion resistance at 550 °C because the protective Si oxide film is formed and prevents dissolution of Ni and Cr.

Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb-Bi at 450 and 550 deg. C

International Nuclear Information System (INIS)

Kurata, Y.; Futakawa, M.; Saito, S.

2005-01-01

Static corrosion tests of various steels were conducted in oxygen-saturated liquid Pb-Bi eutectic at 450 deg. C and 550 deg. C for 3000 h to study the effects of temperature and alloying elements on corrosion behavior in liquid Pb-Bi. Corrosion depth decreases at 450 deg. C with increasing Cr content in steels regardless of ferritic/martensitic steels or austenitic steels. Appreciable dissolution of Ni and Cr does not occur in the three austenitic steels at 450 deg. C. Corrosion depth of ferritic/martensitic steels also decreases at 550 deg. C with increasing Cr content in steels whereas corrosion depth of austenitic steels, JPCA and 316SS becomes larger due to ferritization caused by dissolution of Ni at 550 deg. C than that of ferritic/martensitic steels. An austenitic stainless steel containing about 5%Si exhibits fine corrosion resistance at 550 deg. C because the protective Si oxide film is formed and prevents dissolution of Ni and Cr

Study of the variation of the E-I curves in the superconducting to normal transition of Bi-2212 textured ceramics by Pb addition

Directory of Open Access Journals (Sweden)

Sotelo, A.

2006-06-01

Full Text Available Vitreous cylinders with compositions Bi2-xPbxSr2CaCu2Oy, (x = 0, 0.2, 0.4 and 0.6 were prepared and used as precursors to fabricate textured bars through a laser floating zone melting method (LFZ. The resulting textured cylindrical bars were annealed, followed by their electrical characterization. The microstructure was determined and correlated with the electrical measured properties. The influence of Pb doping on the sharpness of the superconducting to normal transition on the E-I curves has been determined. The sharpest transitions have been obtained for samples doped with 0.4Pb.

Se han preparado precursores de tipo vítreo en forma de cilindro con composiciones nominales Bi2-xPbxSr2CaCu2Oy, con x = 0, 0.2, 0.4 y 0.6. Estos cilindros se han utilizado como precursores para fabricar barras texturadas por medio de una técnica de fusión zonal inducida por láser (LFZ. Estas barras texturadas se recocieron a diferentes temperaturas y se caracterizaron eléctricamente. Además, se examinó su microestructura para correlacionarla con las propiedades eléctricas medidas. La variación de la transición del estado superconductor al normal se ha relacionado con el dopaje con Pb a través de las curvas E-I. Las mejores transiciones se han obtenido para muestras dopadas con 0.4 Pb.

Structure, spectra and thermal, mechanical, Faraday rotation properties of novel diamagnetic SeO2-PbO-Bi2O3-B2O3 glasses

Science.gov (United States)

Chen, Qiuling; Su, Kai; Li, Yantao; Zhao, Zhiwei

2018-06-01

Faraday rotation diamagnetic glass has attracted research attentions in photonics, sensing and magneto optical devices due to their high refractive index, wide transmittance in UV and Fourier transform infrared (FT-IR) range and temperature independent Faraday rotation. Selenite modified heavy metal oxides glasses with composition of xSeO2-(10-x) B2O3-45PbO-45Bi2O3 (x = 0, 1, 5 and 10mol%) and 15%SeO2-40%PbO-45%Bi2O3 have been fabricated by melt-quenching method in present study. The influence of SeO2 on glass forming ability, thermal, mechanical properties and Faraday rotation were evaluated through X-ray Diffraction (XRD), Fourier transforms infrared spectra (FT-IR), Raman, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), Vicker's hardness and Verdet constant measurements. XRD spectra reveal that the good vitrification was achieved for glass with SeO2 amounts ≤10% even without B2O3. FT-IR, Raman and XPS spectra ascertain the existence of characteristic vibration of SeO4, SeO3, PbO4, BiO3 and BO3 units. The incorporation of SeO2 increases the connectivity of glassy network by increasing the Tg, thermal stability and mechanical hardness. The small band gap, high polarizable Se4+ ions and isolated SeO3 units contribute to Faraday rotation improvement.

Consistent dispersive optical-model analyses for n+209Bi and n+208Pb from -20 to +80 MeV

International Nuclear Information System (INIS)

Weisel, G.J.; Tornow, W.; Howell, C.R.

1993-01-01

Complementary databases were constructed from published and some new measurements of σ(θ), Ay(θ) and σ T for n+ 208 Pb and n+ 209 Bi covering the energy range 1.0 to 80 MeV. A dispersive optical-model analysis was performed for both scattering systems while constraining many of the parameters to be identical. A good representation of the data is obtained with conventional geometry and spin-orbit parameters. The 208 Pb model predicts quite well measured energies of single-particle and single-hole bound states. Occupation probabilities are calculated. A fully constrained model is presented in which the only differences between the two systems are the Fermi energy and the usual isospin term. This latter model represents all the data well

Temperature behavior of the hole density of (Bi,Pb)-2212 single crystals

Energy Technology Data Exchange (ETDEWEB)

Ghafari, Aliakbar; Janowitz, Christoph; Dwelk, Helmut; Krapf, Alica; Manzke, Recardo [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany); Ariffin, Ahmad Kamal [Dept. of Physics, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim (Malaysia)

2012-07-01

One of the most puzzling anomalies of high-T{sub c} cuprates is the strong temperature dependence of the Hall coefficient (R{sub H}) and the hole density (n{sub H}). Gor'kov and Teitel'baum (GT) showed by using experimental data of La{sub 2-x}Sr{sub x}CuO{sub 4} (LSCO) that the number of holes per Cu atom, n{sub H}, changes with temperature according to n{sub H}(T,x)=n{sub 0}(x)+n{sub 1}(x)exp(-{Delta}(x)/T). To clarify the temperature dependence of n{sub H} we have determined n{sub H} by X-ray absorption spectra (XAS) at the CuL{sub 3} edge for nearly optimum and slightly underdoped (Bi,Pb)-2212 single crystals. Our results point out that the GT formula cannot fit our data and therefore must be extended to the three terms.

Conceptual design of a forced-flow-cooled 20-kA current lead using Ag-alloy-sheathed Bi-2223 high-temperature superconductors

International Nuclear Information System (INIS)

Heller, R.

1994-11-01

The use of high-temperature superconductors in current leads to reduce refrigeration power has been investigated by many groups in the past. Most used YBCO and Bi-2212 bulk superconductors, although their critical current density is not very high. In this paper, BI-2223 HTSC tapes sheathed with Ag alloys are used in the design of a 20-kA current lead because of their higher critical current in medium magnetic fields. The lead current of 20 kA is related to the coil current of the planned stellarator WENDELSTEIN 7-X. Forced-now helium cooling has been used in the design, allowing position-independent and well-controlled operation. The design characteristics of the lead are presented and 4-K helium cooling of the whole lead, as well as 60-K helium cooling of the copper part of the lead, is discussed. The power consumption at zero current, and the lead's behaviour in case of loss of coolant flow, are given, The results of the design allow extrapolation to current leads of the 50-kA range

Electrical and thermal characteristics of Bi2212/Ag HTS coils for conduction-cooled SMES

International Nuclear Information System (INIS)

Hayakawa, N; Noguchi, S; Kurupakorn, C; Kojima, H; Endo, F; Hirano, N; Nagaya, S; Okubo, H

2006-01-01

In this paper, we investigated the electrical and thermal performance of conduction-cooled Bi2212/Ag HTS coils with 4K-GM cryocooler system. First, we measured the critical current I c for different ambient temperatures T 0 at 4.2 K - 40 K. Experimental results revealed that I c increased with the decrease in T 0 and was saturated at T 0 0 = 4.8 K. Experimental results revealed the criterion of thermal runaway, which was discussed in terms of heat generation and propagation in the test coil

Carrier doping into a superconducting BaPb0.7Bi0.3O3‑δ epitaxial film using an electric double-layer transistor structure

Science.gov (United States)

Komori, S.; Kakeya, I.

2018-06-01

Doping evolution of the unconventional superconducting properties in BaBiO3-based compounds has yet to be clarified in detail due to the significant change of the oxygen concentration accompanied by the chemical substitution. We suggest that the carrier concentration of an unconventional superconductor, BaPb0.7Bi0.3O3‑δ , is controllable without inducing chemical or structural changes using an electric double-layer transistor structure. The critical temperature is found to decrease systematically with increasing carrier concentration.

Effect of lead content on nonstoichiometric Bi2-xPbySr2Ca2Cu3Oδ ceramic superconductors

International Nuclear Information System (INIS)

Diaz-Valdes, E.; Pacheco-Malagon, G.; Contreras-Puente, G.; Mejia-Garcia, C.; Andrade-Garay, G.; Ortiz-Lopez, J.; Conde-Gallardo, A.; Falcony, C.

1993-01-01

Ceramic superconducting samples of the type Bi 2-x Pb y Sr 2 Ca 2 Cu 3 O δ were processed with a nonstoichiometric content of Bi and Pb (x≠y) with respect to the 2223 phase in this system. The resistance vs. temperature characteristics and the presence of the 2223 and 2212 phases as a function of the sample preparation conditions and the lead content (Bi/Pb ratio) are reported. The growth of unwanted phases such as PbO was observed for those samples with a high content of Pb (y=0.9) and Bi (x=0.1). (orig.)

Gd-substituted Bi-2223 superconductor

Indian Academy of Sciences (India)

The effects of gadolinium doping at calcium site on the normal and super- conducting properties of Bi-2223 system were ... quantities of the metal oxides and the carbonates were taken and thoroughly mixed. The calcination of the mixture after .... Therefore, Gd has higher solubility in (BiPb)-2223 as compared to Pr, and is, ...

BI VULPECULAE: A SIAMESE TWIN WITH TWO VERY SIMILAR COOL STARS IN SHALLOW CONTACT

Energy Technology Data Exchange (ETDEWEB)

Qian, S.-B.; Liu, N.-P.; He, J.-J.; Zhu, L.-Y.; Zhao, E. G.; Wang, J.-J.; Li, L.-J.; Jiang, L.-Q. [Yunnan Observatories, Chinese Academy of Sciences (CAS), P. O. Box 110, 650011 Kunming (China); Li, K., E-mail: qsb@ynao.ac.cn [School of Space Science and Physics, Shandong University, Weihai, 264209 Weihai (China)

2013-11-01

BI Vul is a cool eclipsing binary star (Sp. = K3 V) with a short period of 0.2518 days. The first charge-coupled device (CCD) light curves of the binary in the BVRI obtained on 2012 August 21 are presented and are analyzed using the Wilson-Devinney code. It is discovered that BI Vul is a marginal contact binary system (f = 8.7%) that contains two very similar cool components (q = 1.037). Both the marginal contact configuration and the extremely high mass ratio suggest that it is presently evolving into contact with little mass transfer between the components and it is at the beginning stage of contact evolution. By using all available times of minimum light, the variations in the orbital period are investigated for the first time. We find that the observed – calculated (O – C) curve of BI Vul shows a cyclic change with a period of 10.8 yr and an amplitude of 0.0057 days, while it undergoes a downward parabolic variation. The cyclic oscillation is analyzed for the light-travel time effect that arises from the gravitational influence of a possible third stellar object. The mass and orbital separation of the third body are estimated as M {sub 3} ∼ 0.30 M {sub ☉} and ∼4.9 AU, respectively. The downward parabolic change reveals a long-term period decrease at a rate of P-dot = -9.5 x 10{sup -8} days yr{sup –1}. The period decrease may be caused by angular momentum loss via magnetic stellar wind and/or it is only a part of a long-period (longer than 32 yr) cyclic variation, which may reveal the presence of another stellar companion in a wider orbit. These observational properties indicate that the formation of the Siamese twin is driven by magnetic braking and the third stellar companion should play an important role by removing angular momentum from the central binary.

Mean residence times of atmospheric aerosols in the boundary layer as determined from 210Bi/210Pb activity ratios

International Nuclear Information System (INIS)

Papastefanou, C.; Bondietti, E.A.

1991-01-01

Concentrations of radioactive 210 Pb and 210 Bi were measured in surface air after chemical separation and radiochemical analysis in an annual cycle and were used to determine aerosol residence times in the lower atmosphere. It was concluded that residence times of 8 days would apply to aerosols of 0.3 μm activity median aerodynamic diameter (AMAD). Cascade impactor data are also presented in relating the residence times and the AMAD of atmospheric aerosols. (author)

Electroforming of Bi(1-x)Sb(x) nanowires for high-efficiency micro-thermoelectric cooling devices on a chip.

Energy Technology Data Exchange (ETDEWEB)

Overmyer, Donald L.; Webb, Edmund Blackburn, III (,; ); Siegal, Michael P.; Yelton, William Graham

2006-11-01

Active cooling of electronic systems for space-based and terrestrial National Security missions has demanded use of Stirling, reverse-Brayton, closed Joule-Thompson, pulse tube and more elaborate refrigeration cycles. Such cryocoolers are large systems that are expensive, demand large powers, often contain moving parts and are difficult to integrate with electronic systems. On-chip, solid-state, active cooling would greatly enhance the capabilities of future systems by reducing the size, cost and inefficiencies compared to existing solutions. We proposed to develop the technology for a thermoelectric cooler capable of reaching 77K by replacing bulk thermoelectric materials with arrays of Bi{sub 1-x}Sb{sub x} nanowires. Furthermore, the Sandia-developed technique we will use to produce the oriented nanowires occurs at room temperature and can be applied directly to a silicon substrate. Key obstacles include (1) optimizing the Bi{sub 1-x}Sb{sub x} alloy composition for thermoelectric properties; (2) increasing wire aspect ratios to 3000:1; and (3) increasing the array density to {ge} 10{sup 9} wires/cm{sup 2}. The primary objective of this LDRD was to fabricate and test the thermoelectric properties of arrays of Bi{sub 1-x}Sb{sub x} nanowires. With this proof-of-concept data under our belts we are positioned to engage National Security systems customers to invest in the integration of on-chip thermoelectric coolers for future missions.

Evaluation at the medium energy region for Pb-208 and Bi-209

International Nuclear Information System (INIS)

Fukahori, Tokio; Pearlstein, S.

1991-01-01

Medium energy nuclear data in the 1--1000 MeV range is necessary to accelerator applications which include spallation neutron sources for radioactive waste treatment and accelerator shielding design, medical applications which include isotopes production and radiation therapy, and space applications. For the design of fission and fusion reactors, the nuclear data file for neutrons below 20 MeV is available and well evaluated. Evaluated nuclear data for protons and data in the medium energy region, however, have not been prepared completely. Evaluation in the medium energy region was performed using the theoretical calculation code ALICE-P or experimental data. In this paper, the evaluation of neutron and proton induced nuclear data for Pb-208 and Bi-209 has been performed using ALICE-P, empirical calculations and new systematics for the fission cross section. The evaluated data are compiled for possible inclusion in the ENDF/B-VI High Energy File. 204 refs., 51 figs., 9 tabs

Out-of-pile chemical compatibility of Pb-Bi eutectic alloy with graphite

Energy Technology Data Exchange (ETDEWEB)

Sengupta, A.K.; Bhagat, R.K.; Jarvis, T.; Majumdar, S. [Radiometallurgy Div., Bhabha Atomic Research Centre, Mumbai (India); Laik, A.; Kale, G.B. [Material Science Div., Bhabha Atomic Research Centre, Mumbai (India); Kamath, H.S. [Nuclear Fuels Group, Bhabha Atomic Research Centre, Mumbai (India)

2006-06-15

Lead Bismuth eutectic alloy (Pb: 55.5 wt.%, Bi: 44.5 wt.%) is a potential candidate coolant material for high-temperature reactors because of its low melting point (124 C), high thermal conductivity, heat capacity, and better neutronic properties. Out-of-pile chemical compatibility studies of this coolant with graphite (coolant channel) have been carried out by isothermal annealing of the liquid alloy in a graphite crucible at 800, 900, 1000, and 1100 C for times ranging from 100 h to 1000 h. Formation of a reaction layer is observed. The growth rate of the reaction layer follows a parabolic law. Reaction layer thicknesses of 61.3 {mu}m and 121 {mu}m are estimated from the growth rate vs. time relation after 1 year and 5 years respectively. The growth of the reaction layer is diffusion-controlled and the activation energy of the reaction is estimated to be 100 KJ/mol. (orig.)

Out-of-pile chemical compatibility of Pb-Bi eutectic alloy with graphite

International Nuclear Information System (INIS)

Sengupta, A.K.; Bhagat, R.K.; Jarvis, T.; Majumdar, S.; Laik, A.; Kale, G.B.; Kamath, H.S.

2006-01-01

Lead Bismuth eutectic alloy (Pb: 55.5 wt.%, Bi: 44.5 wt.%) is a potential candidate coolant material for high-temperature reactors because of its low melting point (124 C), high thermal conductivity, heat capacity, and better neutronic properties. Out-of-pile chemical compatibility studies of this coolant with graphite (coolant channel) have been carried out by isothermal annealing of the liquid alloy in a graphite crucible at 800, 900, 1000, and 1100 C for times ranging from 100 h to 1000 h. Formation of a reaction layer is observed. The growth rate of the reaction layer follows a parabolic law. Reaction layer thicknesses of 61.3 μm and 121 μm are estimated from the growth rate vs. time relation after 1 year and 5 years respectively. The growth of the reaction layer is diffusion-controlled and the activation energy of the reaction is estimated to be 100 KJ/mol. (orig.)

Ion mobility and conductivity in the M{sub 0.5–x}Pb{sub x}Bi{sub 0.5}F{sub 2+x} (M=K, Rb) solid solutions with fluorite structure

Energy Technology Data Exchange (ETDEWEB)

Kavun, V. Ya., E-mail: kavun@ich.dvo.ru [Institute of Chemistry FEBRAS, 159, Pr. 100-letya Vladivostoka, Vladivostok 690022 (Russian Federation); Uvarov, N.F. [Institute of Solid State Chemistry and Mechanochemistry, SB RAS, 18, Kutateladze Str., Novosibirsk 630128 (Russian Federation); Slobodyuk, A.B.; Polyantsev, M.M.; Merkulov, E.B. [Institute of Chemistry FEBRAS, 159, Pr. 100-letya Vladivostoka, Vladivostok 690022 (Russian Federation); Ulihin, A.S. [Institute of Solid State Chemistry and Mechanochemistry, SB RAS, 18, Kutateladze Str., Novosibirsk 630128 (Russian Federation); Goncharuk, V.K. [Institute of Chemistry FEBRAS, 159, Pr. 100-letya Vladivostoka, Vladivostok 690022 (Russian Federation)

2017-05-15

Ionic mobility and conductivity in the K{sub 0.5–x}Pb{sub x}Bi{sub 0.5}F{sub 2+x} and Rb{sub 0.5–x}Pb{sub x}Bi{sub 0.5}F{sub 2+x} (x=0.05, 0.09) solid solutions with the fluorite structure have been investigated using the methods of {sup 19}F NMR, X-ray diffraction and impedance spectroscopy. Types of ionic motions in the fluoride sublattice of solid solutions have been established and temperature ranges of their realization have been determined (150–450 K). Diffusion of fluoride ions is a dominating type of ionic motions in the fluoride sublattice of solid solutions under study above 350 K. Due to high ionic conductivity, above 10{sup –3} S/cm at 450 K, these solid solutions can be used as solid electrolytes in various electrochemical devices and systems. - Graphical abstract: Temperature dependence of the concentration of mobile (2, 4) and immobile (1, 3) F ions in the K{sub 0.5–x}Pb{sub x}Bi{sub 0.5}F{sub 2+x} solid solutions. - Highlights: • Studied the ion mobility, conductivity in M{sub 0.5–x}Pb{sub x}Bi{sub 0.5}F{sub 2+x} solid solutions (M=K, Rb). • An analysis of {sup 19}F NMR spectra made it possible to identify types of ion mobility. • The main type of ion motion above 300 K in solid solutions is a diffusion of ions F{sup –}. • The ionic conductivity of the solid solutions studied more than 10{sup –3} S/cm at 450 K.

A study on non-crystalline BiPbSbSrCaCuO and its heat treatment effect

International Nuclear Information System (INIS)

Zhang Hong; Wu Hong; Hu Suhui

1993-01-01

In this work positron annihilation spectroscopy, X ray diffraction, differential thermal analysis, scanning electron microscopy and ac susceptibility measurement have been used to study non-crystalline Bi-Pb-Sb-Sr-Ca-Cu-O and the effect of heat treatment. The crystallization temperature T c is around 450-470 degree C for investigated materials. There are low temperature and high temperature structure relaxation as in metallic glasses from room temperature to glass temperature. For T>T c in the crystallized multiphase the low n phase can transform to high n phase by reaction diffusion and T c can reach near 110 K by 850 degree C annealing. The positron annihilation characteristics are sensitive to phase transformation and the electron density sampled by positrons in the non-crystal is lower than that in crystallized one. The doping of Pb and Sb together is of benefit to forming of non-crystal but narrows the temperature range of the viscous state

Depth profile of production yields of {sup nat}Pb(p, xn) {sup 206,205,204,203,202,201}Bi nuclear reactions

Energy Technology Data Exchange (ETDEWEB)

Mokhtari Oranj, Leila [Division of Advanced Nuclear Engineering, POSTECH, Pohang 37673 (Korea, Republic of); Jung, Nam-Suk; Kim, Dong-Hyun; Lee, Arim; Bae, Oryun [Pohang Accelerator Laboratory, POSTECH, Pohang 37673 (Korea, Republic of); Lee, Hee-Seock, E-mail: lee@postech.ac.kr [Pohang Accelerator Laboratory, POSTECH, Pohang 37673 (Korea, Republic of)

2016-11-01

Experimental and simulation studies on the depth profiles of production yields of {sup nat}Pb(p, xn) {sup 206,205,204,203,202,201}Bi nuclear reactions were carried out. Irradiation experiments were performed at the high-intensity proton linac facility (KOMAC) in Korea. The targets, irradiated by 100-MeV protons, were arranged in a stack consisting of natural Pb, Al, Au foils and Pb plates. The proton beam intensity was determined by activation analysis method using {sup 27}Al(p, 3p1n){sup 24}Na, {sup 197}Au(p, p1n){sup 196}Au, and {sup 197}Au(p, p3n){sup 194}Au monitor reactions and also by Gafchromic film dosimetry method. The yields of produced radio-nuclei in the {sup nat}Pb activation foils and monitor foils were measured by HPGe spectroscopy system. Monte Carlo simulations were performed by FLUKA, PHITS/DCHAIN-SP, and MCNPX/FISPACT codes and the calculated data were compared with the experimental results. A satisfactory agreement was observed between the present experimental data and the simulations.

The effect of heat treatment on the properties of (Bi,Pb)2Sr2Ca2Cu3Oδ

International Nuclear Information System (INIS)

Fetisov, A.V.; Yasnikov, A.G.; Fotiev, A.A.

1994-01-01

In synthesis of (Bi,Pb) 2 Sr 2 Ca 2 Cu 2 O δ (2-2-2-3 phase), which is known to belong to a homologous series of bismuth-based superconductors, several routes have been reported to date to yield materials with a high content, around 95% of the main phase. This phase is characterized by the highest superconducting-transition temperature T c among all known high-T c materials. Based on literature data, heat-treatment conditions are expected to affect strongly the T c of the 2-2-2-3 phase, as they do for other high-T c materials. An optimal oxygen content in 2-2-2-3 was presumed to be the deciding factor for attainment of high T c 's. However, heating below ∼ 870 K in air causes no change in oxygen content in the 2-2-2-3 phase. At the same time, it is oxidizing annealing at T c up to 105-110 K. The conclusions found that changes in oxygen content for (Bi,Pb) 2 Sr 2 Ca 2 Cu 2 O δ (2-2-2-3 phase) do not affect T c , which remains unchanged after shor anneals at 370-1020 Kelvin in different atmospheres. In order to obtain high T c 's, it will suffice to exclude long anneals at 1020-1090 Kelvin from the technology. For the 2-2-2-3 phase, a degradation process, which does not change the composition of the phase, is like that for YBa 2 Cu 3 O 6+delta . Proposed is that different structural planes participate in mass exhanage with an atmosphere: (BiO) planes which do not participate to superconductivity, participate in oxygen exchange; and H 2 O and CO 2 penetrate into the CuO 2 planes, which are responsible for superconductivity in the 2-2-2-3 phase

Quijarroite, Cu6HgPb2Bi4Se12, a New Selenide from the El Dragόn Mine, Bolivia

Directory of Open Access Journals (Sweden)

Hans-Jürgen Förster

2016-11-01

Full Text Available Quijarroite, ideally Cu6HgPb2Bi4Se12, is a new selenide species from the El Dragόn mine, Department of Potosí, Bolivia. It most frequently occurs as lath-shaped thin plates (up to 150 µm in length and 20 µm in width intimately (subparallel intergrown with hansblockite, forming an angular network-like intersertal texture. Quijarroite is occasionally also present as sub- to anhedral grains up to 200 µm in length and 50 µm in width. It is non-fluorescent, black and opaque with a metallic luster and black streak. It is brittle, with an irregular fracture and no obvious cleavage and parting. In plane-polarized incident light, quijarroite is weakly pleochroic from cream to very slightly more brownish-cream, displaying no internal reflections. Between crossed polars, quijarroite is moderately anisotropic with pale orange-brown to blue rotation tints. Lamellar twinning on {110} is common; parquet twinning occurs rarely. The reflectance values in the air for the COM (Commission on Ore Mineralogy standard wavelengths (R1 and R2 are: 46.7, 46.8 (470 nm, 47.4, 48.2 (546 nm, 47.1, 48.5 (589 nm, and 46.6, 48.7 (650 nm. Electron-microprobe analyses yielded a mean composition of Cu 13.34, Ag 1.02, Hg 7.67, Pb 16.87, Co 0.03, Ni 0.15, Bi 27.65, Se 33.52, total 100.24 wt %. The mean empirical formula, normalized to 25 apfu (atoms per formula unit, is (Cu5.84Ag0.26Σ = 6.10(Hg1.06Ni0.07Co0.01Σ = 1.14Pb2.27Bi3.68Se11.81 (n = 24. The simplified formula is Cu6HgPb2Bi4Se12. Quijarroite is orthorhombic, space group Pmn21, with a = 9.2413(8, b = 9.0206(7, c = 9.6219(8 Å, V = 802.1(1 Å3, Z = 1. The calculated density is 5.771 g·cm−3. The five strongest X-ray powder-diffraction lines (d in Å (I/I0 (hkl are: 5.36 (55 (111, 3.785 (60 (211, 3.291 (90 (022, 3.125 (100 (212, and 2.312 (50 (400. The crystal structure of quijarroite can be considered a galena derivative and could be derived from that of bournonite. It is a primary mineral, deposited from an

Specific features of acoustic properties of ceramic Bi1.4Pb0.6Ca2Sr2Cu3Oy

International Nuclear Information System (INIS)

Gajduk, A.L.; Fil', V.D.; Burma, N.G.

1991-01-01

Anomalies of sound velocity and attenuation, as well as of heat capacity are revealed in the Pb-stabilized Bi ceramics of the composition 2-2-2-3 atare 60 K, which are interpreted as the second-order phase transition. The sensitivity of the anomalies to the quenched magnetic flux is indicative of the magnetic nature of the transition. Similar features also observed at the same temperature in the 1-2-3* type superconducting systems

Analysis on small long life reactor using thorium fuel for water cooled and metal cooled reactor types

International Nuclear Information System (INIS)

Permana, Sidik

2009-01-01

Long-life reactor operation can be adopted for some special purposes which have been proposed by IAEA as the small and medium reactor (SMR) program. Thermal reactor and fast reactor types can be used for SMR and in addition to that program the utilization of thorium fuel as one of the candidate as a 'partner' fuel with uranium fuel which can be considered for optimizing the nuclear fuel utilization as well as recycling spent fuel. Fissile U-233 as the main fissile material for thorium fuel shows higher eta-value for wider energy range compared with other fissile materials of U-235 and Pu-239. However, it less than Pu-239 for fast energy region, but it still shows high eta-value. This eta-value gives the reactor has higher capability for obtaining breeding condition or high conversion capability. In the present study, the comparative analysis on small long life reactor fueled by thorium for different reactor types (water cooled and metal cooled reactor types). Light water and heavy water have been used as representative of water-cooled reactor types, and for liquid metal-cooled reactor types, sodium-cooled and lead-bismuth-cooled have been adopted. Core blanket arrangement as general design configuration, has been adopted which consist of inner blanket region fueled by thorium oxide, and two core regions (inner and out regions) fueled by fissile U-233 and thorium oxide with different percentages of fissile content. SRAC-CITATION and JENDL-33 have been used as core optimization analysis and nuclear data library for this analysis. Reactor operation time can reaches more than 10 years operation without refueling and shuffling for different reactor types and several power outputs. As can be expected, liquid metal cooled reactor types can be used more effective for obtaining long life reactor with higher burnup, higher power density, higher breeding capability and lower excess reactivity compared with water-cooled reactors. Water cooled obtains long life core operation

HREM study of Bi-oxide based high Tc superconductors

International Nuclear Information System (INIS)

Hewat, E.A.

1988-01-01

A HREM study of the superstructure and structural defects in Bi 2-x Pb x Sr 2 CaCu 2 O 8 and Bi 2-x Pb x (SrCa) 2 CuO 6 (for x=0 and x=0.4) is presented. The superstructures are shown to involve waves of distortion along the b-axis. These waves are locked on to the lattice positions so that they have a local wave length of 4,5,6,7 or 8 times the basic unit cell. The superstructures are composed of roughly periodic combinations of these basic building blocks (waves). The lead doped superconductors show a less pronounced but more complicated superstructure along b where two distinct periodicities close to 4 and 7 times the basic unit cell predominate. In each of the compounds studied the superstructure, in the better ordered crystals, is shown to be commensurate with a unit cell between 5 and 23 times the basic unit cell. The superstructure in Bi 2-x Pb x Sr 2 CaCu 2 O 8 is orthorhombic where as the superstructure in Bi 2-x Pb x (SrCa) 2 CuO 6 is monoclinic. All these superconductors have a low ''twin'' density (ie density of 90 0 twist boundaries). They exhibit many dislocations and dislocation arrays associated with the weak bonding between BiO planes. They also form non-stoechiometric stacking faults with local changes in the c-axis spacing between layers

Coordination chemistry of the {sup 212}Pb/{sup 212}Bi nuclear transformation: Alpha-emitting radiopharmaceuticals. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Parks, N.J.; Harris, W.R.; Keen, C.L.; Cooper, S.R.

1992-07-01

Subdivisions of this project are: (a) the synthesis of prototypical thiolate and dithiocarbamate based hexacoordinate complexes, (b) radiochemical engineering for generation of no-carrier-added lead and bismuth radioelements, (c) the first isolation of bismuth-binding proteins from in vivo studies with cyclotron produced {sup 205/206}Bi tracer, and (d) initial development of transport mechanisms for the intracellular radiobiological study of alpha emitting bismuth, and (e) the initiation of chemical equilibrium studies and biochemical pathways with cyclotron-produced, no-carrier-added, {sup 203}Pb (T{sub 1/2} = 51 hr).

Preparation of (Bi,Pb)2Sr2Ca2Cu3Ox precursor powders by a modified polyethylene glycol based sol-gel process

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Andersen, N.H.

2002-01-01

A modified sol-gel process based on polyethylene glycol has been developed for preparing (Bi,Pb)(2)Sr2Ca2Cu3Ox precursor powders in view of Ag-sheeted tape manufacture. A careful control of the pH and concentration temperature yields an amorphous gel, which can be converted to a fine and extremely...

Highly c-axis-oriented monocrystalline Pb(Zr, Ti)O₃ thin films on si wafer prepared by fast cooling immediately after sputter deposition.

Science.gov (United States)

Yoshida, Shinya; Hanzawa, Hiroaki; Wasa, Kiyotaka; Esashi, Masayoshi; Tanaka, Shuji

2014-09-01

We successfully developed sputter deposition technology to obtain a highly c-axis-oriented monocrystalline Pb(Zr, Ti)O3 (PZT) thin film on a Si wafer by fast cooling (~-180°C/min) of the substrate after deposition. The c-axis orientation ratio of a fast-cooled film was about 90%, whereas that of a slow-cooled (~-40°C/min) film was only 10%. The c-axis-oriented monocrystalline Pb(Zr0.5, Ti0.5)O3 films showed reasonably large piezoelectric coefficients, e(31,f) = ~-11 C/m(2), with remarkably small dielectric constants, ϵ(r) = ~220. As a result, an excellent figure of merit (FOM) was obtained for piezoelectric microelectromechanical systems (MEMS) such as a piezoelectric gyroscope. This c-axis orientation technology on Si will extend industrial applications of PZT-based thin films and contribute further to the development of piezoelectric MEMS.

Effects of Pb concentration on phase, microstructure and electrical properties of Bi3.25La0.75Ti3O12 ceramics

International Nuclear Information System (INIS)

Lawita, P.; Siriprapa, P.; Watcharapasorn, A.; Jiansirisomboon, S.

2012-01-01

In this work, effects of Pb-doping concentration on phase, microstructure and electrical properties of bismuth lead lanthanum titanate (Bi 1−x Pb x ) 3.25 La 0.75 Ti 3 O 12 or BPLT ceramics when x = 0, 0.01, 0.03, 0.05, 0.07, 0.09 and 0.1 were investigated. Phase analysis by X-ray diffraction indicated the existence of orthorhombic phase for all BPLT powders and ceramics. Microstructural investigation using scanning electron microscope showed that all ceramics composed mainly of plate-like grains. An increase in PbO doping content reduced not only diameter and thickness of the grains but also density of the ceramics. Electrical conductivity was found to decrease while dielectric constant increased with Pb-doping concentration. Small reduction of remanent polarization and coercive field was observed in Pb-doped samples. - Highlights: ► We prepared bismuth lead lanthanum titanate ceramics by a solid state mixed-oxide method. ► The optimum sintering temperature was found to be 1150 °C. ► BPLT ceramic was identified by X-ray diffraction method to possess an orthorhombic structure. ► All samples shows plate-like morphology with varying grain size and orientation. ► Increasing Pb-doping content tended to decrease electrical conductivity values.

Structural relaxation in the magnetically treated glass ceramic Bi1.8Pb0.2Sr2CaCu2Ox

International Nuclear Information System (INIS)

Alekseenko, V.I.; Volkova, G.K.; Konstanminova, T.E.; Nosolev, I.K.; Popova, I.B.

1994-01-01

Structure relaxation in Bi 1.8 Pb 0.2 Sr 2 CaCu 2 O x amorphous glass ceramics after the treatment using weak pulse magnetic field is studied using microindentation, X-ray structure analysis and inner friction techniques. Structure relaxation after substance treatment using pulse magnetic field is detected to occur at room temperature and to result in its strengthening (increase of microhardness-H v ) and in reduction of inner microstress level.9 refs., 4 figs

A new high-spin isomer in {sup 195}Bi

Energy Technology Data Exchange (ETDEWEB)

Roy, T.; Mukherjee, G.; Rana, T.K.; Bhattacharya, Soumik; Asgar, Md.A.; Bhattacharya, C.; Bhattacharya, S.; Bhattacharyya, S.; Pai, H. [Variable Energy Cyclotron Centre, Kolkata (India); Madhavan, N.; Bala, I.; Gehlot, J.; Gurjar, R.K.; Jhingan, A.; Kumar, R.; Muralithar, S.; Nath, S.; Singh, R.P.; Varughese, T. [Inter University Acclerator Centre, New Delhi (India); Basu, K.; Bhattacharjee, S.S.; Ghugre, S.S.; Raut, R.; Sinha, A.K. [UGC-DAE-CSR Kolkata Centre, Kolkata (India); Palit, R. [Tata Institute of Fundamental Research, Department of Nuclear and Atomic Physics, Mumbai (India)

2015-11-15

A new high-spin isomer has been identified in {sup 195}Bi at the focal plane of the HYbrid Recoil mass Analyser (HYRA) used in the gas-filled mode. The fusion evaporation reactions {sup 169}Tm ({sup 30}Si, x n) {sup 193,} {sup 195}Bi were used with the beam energies on targets of 168 and 146MeV for 6n and 4n channels, respectively. The evaporation residues, separated from the fission fragments, and their decays were detected at the focal plane of HYRA using MWPC, Si-Pad and clover HPGe detectors. The half-life of the new isomer in {sup 195}Bi has been measured to be 1.6(1) μs. The configuration of the new isomer has been proposed and compared with the other isomers in this region. The Total Routhian Surface (TRS) calculations for the three-quasiparticle configurations corresponding to the new isomer suggest an oblate deformation for this isomeric state. The same calculations for different configurations in {sup 195}Bi and for the even-even {sup 194}Pb core indicate that the proton i{sub 13/2} orbital has a large shape driving effect towards oblate shape in these nuclei. (orig.)

Electrode contacts on ferroelectric Pb(Zr x Ti1−x )O3 and SrBi2Ta2O9 thin films and their influence on fatigue properties

OpenAIRE

Lee, J. J.; Thio, C. L.; Desu, Seshu B.

1995-01-01

The degradation (fatigue) of dielectric properties of ferroelectric Pb(ZrxTi1-x)O-3 (PZT) and SrBi2Ta2O9 thin films during cycling was investigated. PZT and SrBi2Ta2O9 thin films were fabricated by metalorganic decomposition and pulsed laser deposition, respectively. Samples with electrodes of platinum (Pt) and ruthenium oxide (RuO2) were studied. The interfacial capacitance (if any) at the Pt/PZT, RuO2/PZT, and Pt/SrBi2Ta2O9 interfaces was determined from the thickness dependence of low-fiel...

Comparison of growth texture in round Bi2212 and flat Bi2223 wires and its relation to high critical current density development

OpenAIRE

Kametani, F.; Jiang, J.; Matras, M.; Abraimov, D.; Hellstrom, E. E.; Larbalestier, D. C.

2015-01-01

Why Bi2Sr2CaCu2Ox (Bi2212) allows high critical current density Jc in round wires rather than only in the anisotropic tape form demanded by all other high temperature superconductors is important for future magnet applications. Here we compare the local texture of state-of-the-art Bi2212 and Bi2223 ((Bi,Pb)2Sr2Ca2Cu3O10), finding that round wire Bi2212 generates a dominant a-axis growth texture that also enforces a local biaxial texture (FWHM

The Crystal Structure of Cu4Bi4Se9

DEFF Research Database (Denmark)

Makovicky, E.; Søtofte, Inger; Karup-Møller, S.

2002-01-01

contains three square pyramidal Bi sites, an octahedrally coordinated Bi site as well as two tetrahedrally and two irregularly coordinated Cu sites. The structure is an intergrowth of PbS-like slabs with irregularly configured slabs of Bi pyramids and Cu tetrahedra. It contains covalently bonded Se-2...

Preparation of high - superconductor BSCCO in system with added Pb using method of synthesis Pechini

International Nuclear Information System (INIS)

Aguiar, Felipe Magalhaes de; Rodrigues, Vivian Delmute; Paula, Fernando Rogerio de

2014-01-01

This paper studied compound of the ceramic superconductor Bi-Sr-Ca-Cu-O (BSCCO). The predominant BSCCO system has four phases: Bi_2Sr_2CuO6 (Bi-2201), Bi_2Sr_2Ca_1Cu_2O_8 (Bi-2212), Bi_2Sr_2Ca_2Cu_3O_1_0 (Bi-2223) e Bi_2Sr_2Ca_3Cu_4O_1_2 (Bi-2234). Of these, the most studied is the Bi-2223 and this is due to present the highest critical temperature (Tc) (125K). However, this phase is more unstable and, therefore in this work we study the stabilization of Bi-2223 phase using the substitution method, in which Bi is replaced with the Pb. The samples were obtained by method of synthesis Pechini, the stoichiometry Bi_2_-_xPb_xSr_2Ca_2Cu_3O_y. The samples obtained were characterized by diffraction ray - X, electric measurement (RxT), Scanning electron microscope (SEM), Energy dispersive ray-x spectroscopy (EDX). The results showed that the best concentration of lead in phase and stabilizing Bi-2223 was the 0,40 mols obtaining the stoichiometry Bi_1_,_7_6Pb_0_,_2_0Sr_1_,_9_6Ca_2_,_1_8Cu_2_,_9_0O_y, which showed a T_c of 124 K. (author)

Measurement of conversion electrons with the $^{208}Pb(p,n)^{208}Bi$ reaction and derivation of the shell model proton neutron hole interaction from the properties of $^{208}Bi$

CERN Document Server

Maier, K H; Dracoulis, G D; Boutachkov, P; Aprahamian, A; Byrne, A P; Davidson, P M; Lane, G L; Marie-Jeanne, Mélanie; Nieminen, P; Watanabe, H

2007-01-01

Conversion electrons from 208Bi have been measured using singles and coincidence techniques with the 208Pb(p,n)208Bi reaction at 9 MeV. The new information on multipolarities and spins complements that available from recent gamma-gamma-coincidence studies with the same reaction [Boutachkov et al., Nucl. Phys. A768, 22 (2006)]. The results on electromagnetic decays taken together with information on spectroscopic factors from earlier single-particle transfer reaction measurements represent an extensive data set on the properties of the one-proton one-neutron-hole states below 3 MeV, a spectrum which is virtually complete. Comparison of the experimental observables, namely, energies, spectroscopic factors, and gamma-branching ratios, with those calculated within the shell model allows extraction of the matrix elements of the shell model residual interaction. More than 100 diagonal and nondiagonal elements can be determined in this way, through a least squares fit to the experimental data. This adjustment of the...

Sex differences in life history drive evolutionary transitions among maternal, paternal, and bi-parental care.

Science.gov (United States)

Klug, Hope; Bonsall, Michael B; Alonzo, Suzanne H

2013-04-01

Evolutionary transitions among maternal, paternal, and bi-parental care have been common in many animal groups. We use a mathematical model to examine the effect of male and female life-history characteristics (stage-specific maturation and mortality) on evolutionary transitions among maternal, paternal, and bi-parental care. When males and females are relatively similar - that is, when females initially invest relatively little into eggs and both sexes have similar mortality and maturation - transitions among different patterns of care are unlikely to be strongly favored. As males and females become more different, transitions are more likely. If females initially invest heavily into eggs and this reduces their expected future reproductive success, transitions to increased maternal care (paternal → maternal, paternal → bi-parental, bi-parental → maternal) are favored. This effect of anisogamy (i.e., the fact that females initially invest more into each individual zygote than males) might help explain the predominance of maternal care in nature and differs from previous work that found no effect of anisogamy on the origin of different sex-specific patterns of care from an ancestral state of no care. When male mortality is high or male egg maturation rate is low, males have reduced future reproductive potential and transitions to increased paternal care (maternal → paternal, bi-parental → paternal, maternal → bi-parental) are favored. Offspring need (i.e., low offspring survival in the absence of care) also plays a role in transitions to paternal care. In general, basic life-history differences between the sexes can drive evolutionary transitions among different sex-specific patterns of care. The finding that simple life-history differences can alone lead to transitions among maternal and paternal care suggests that the effect of inter-sexual life-history differences should be considered as a baseline scenario when attempting to understand how other

Spatial variations in composition in high-critical-current-density Bi-2223 tapes

International Nuclear Information System (INIS)

Holesinger, T. G.; Bingert, J. F.; Teplitsky, M.; Li, Q.; Parrella, R.; Rupich, M. P.; Riley, G. N. Jr.

2000-01-01

A detailed compositional analysis of high-critical-current-density (J c ) (55 and 65 kA/cm2 at 77 K) (Bi, Pb) 2 Sr 2 Ca 2 Cu 3 O y (Bi-2223) tapes was undertaken by energy dispersive spectroscopy in the transmission electron microscope. Structural features were coupled with characteristic compositions of the Bi-2223 phase. The average of all compositional measurements of the Bi-2223 phase was determined to be Bi 1.88 Pb 0.23 Sr 1.96 Ca 1.95 Cu 2.98 O y . However, spatial variations in the Bi-2223 composition and differing phase equilibria were found throughout the filament structure. In particular, a considerable range of Bi-2223 compositions can be found within a single tape, and the lead content of the Bi-2223 phase is significantly depressed in the vicinity of lead-rich phases. The depletion of lead in the Bi-2223 phase around the 3221 phases may be a current-limiting microstructure in these tapes. (c) 2000 Materials Research Society

In situ neutron scattering study of nanostructured PbTe-PbS bulk thermoelectric material

Energy Technology Data Exchange (ETDEWEB)

Ren, Fei [Temple University; Schmidt, Robert D [ORNL; Case, Eldon D [Michigan State University, East Lansing; An, Ke [ORNL

2016-01-01

Nanostructures play an important role in thermoelectric materials. Their thermal stability, such as phase change and evolution at elevated temperatures, is thus of great interest to the thermoelectric community. In this study, in situ neutron diffraction was used to examine the phase evolution of nanostructured bulk PbTe-PbS materials fabricated using hot pressing and pulsed electrical current sintering (PECS). The PbS second phase was observed in all samples in the as-pressed condition. The temperature dependent lattice parameter and phase composition data show an initial formation of PbS precipitates followed by a redissolution during heating. The redissolution process started around 570 600 K, and completed at approximately 780 K. During cooling, the PECS sample followed a reversible curve while the heating/cooling behavior of the hot pressed sample was irreversible.

Production of BiPbSrCaCuO thin films on MgO and Ag/MgO substrates by electron beam deposition techniques

CERN Document Server

Varilci, A; Gorur, O; Celebi, S; Karaca, I

2002-01-01

Superconducting BiPbSrCaCuO thin films were prepared on MgO(001) and Ag/MgO substrates using an electron beam (e-beam) evaporation technique. The effects of annealing temperature and Ag diffusion on the crystalline structure and some superconducting properties, respectively, were investigated by X-ray diffraction, atomic force microscopy, and by measurements of the critical temperature and the critical current density. It was shown that an annealing of both types of films at 845 or 860 C resulted in the formation of mixed Bi-2223 and Bi-2212 phases with a high degree of preferential orientation with the c-axis perpendicular to the substrates. The slight increase of the critical temperature from 103 K to 105 K, the enhancement of the critical current density from 2 x 10 sup 3 to 6 x 10 sup 4 A/cm sup 2 , and the improved surface smoothness are due to a possible silver doping from the substrate. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

Microstructural dynamics of Bi-2223/Ag tapes annealed in 8% O₂

DEFF Research Database (Denmark)

Andersen, L.G.; Poulsen, H.F.; Abrahamsen, A.B.

2002-01-01

The microstructural dynamics of Bi-2223 tapes are investigated in situ during annealing in 8% O-2 by means of 100 keV x-ray diffraction. A green mono- and a green multi-filamentary tape are annealed at 829.5 degreesC. During ramp-up (Ca,Sr)(2)PbO4 decomposes above 750 degreesC, resulting in an in......The microstructural dynamics of Bi-2223 tapes are investigated in situ during annealing in 8% O-2 by means of 100 keV x-ray diffraction. A green mono- and a green multi-filamentary tape are annealed at 829.5 degreesC. During ramp-up (Ca,Sr)(2)PbO4 decomposes above 750 degreesC, resulting...... in an incorporation of Pb in Bi-2212. The associated grain growth of Bi-2212 is the main cause of the strain relief and the c-axis grain alignment of the Bi containing phases. Above 825 degreesC the Bi-2212 partly dissociates into (Ca,Sr)(14)Cu24Ox and a liquid phase. The linewidth of Bi-2212 is constant during...... the transformation to Bi-2223, indicating no strain or finite-size broadening. The most probable transformation mechanism is found to be nucleation and growth with a fast decomposition of the individual Bi-2212 grain, followed by a growth of Bi-2223 from the Bi-2212 melt reacting with (Ca,Sr)(14)Cu24Ox. The multi...

BiCaSrCuO superconductors

International Nuclear Information System (INIS)

Polvi, V.M.; Niemi, K.J.

1989-01-01

BiCaSrCuO and BiPbCaSrCuO powders have been synthesized. Different research methods (SEM,EDS,XRF,SRD,DTA) have been used to characterize the bulk specimen and wires. Resistance and current density measured as a function of temperature are reported. The ceramic products contained several phases. Lead containing specimen gave the best results and the synthesis was easily reproducible

The effect of long annealing on Pb-doped high-Tc Bi-Sr-Ca-Cu-O systems

Energy Technology Data Exchange (ETDEWEB)

Chandra, S.; Agnihotry, S.A.; Asthana, P.; Nagpal, K.C.; Saini, K.K.; Chanderkant; Sharma, C.P.; Ekbote, S.N. (National Physical Lab., New Delhi (India))

1991-01-16

The lead doped Bi based copper oxide high-Tc superconductors with different nominal compositions and with different annealing time periods are studied. The highest Tc (zero) achieved is 112 K in bulk phase 2223. The varying intensity of the low angle line at 2{theta}{approx equal}4.7deg suggests the gradual formation of the high-Tc phase due to the long annealing of nearly 200 to 250 h. It is also found that the high-Tc phase starts degrading after 250 h of annealing and Tc reduces. The distortion of the 2223 phase is suggested by the broadening of different XRD peaks, also the SEM studies support the above contention. The EDAX studies show no presence of Pb in the crystallites. (orig.).

Safety design/analysis and scenario for prevention of CDA with ECCS in lead-bismuth-cooled fast reactor

International Nuclear Information System (INIS)

Minoru, Takahashi; Vaclav, Dostal; Abu Khalid, Rivai; Novitrian; Yumi, Yamada

2007-01-01

Safety design has been developed to show safety feature of Pb-Bi-cooled direct contact boiling water small fast reactor (PBWFR). The core is designed to have negative void reactivity even if the entire core and upper plenum are voided by steam intrusion from above. In-vessel type control rod driving mechanisms are used to prevent control rods from accidental ejection due to high pressure in the reactor vessel. In cases of coolant leakage from reactor vessel and feed water pipes, Pb-Bi coolant level in the reactor vessel is kept at the required level for decay heat removal by means of closed type guard vessel. Dual pipes are adopted to avoid leak of water in the feedwater system. Pump trip in feedwater systems initiates loss of coolant flow (LOF) event, although there is no concern of loss of flow accident due to primary pump trip. Injection of high pressure water slows down the flow-coast-down of feedwater at the LOF event. It has been evaluated that the fuel temperature is kept lower than safety limits at the unprotected loss of flow and heat sink (ATWS). A scenario for prevention of the core disruptive accident (CDA) with the emergency core cooling system (ECCS) is examined. The reactor becomes super-critical when the reactor vessel is filled with water. It is necessary to use water with boric acid for the ECC system, and additional backup rods for sub-critical core in water injection. (authors)

Production and identification of new, neutron-rich nuclei in the 208Pb region

International Nuclear Information System (INIS)

Rykaczewski, K.; Kurpeta, J.; Plochocki, A.; Karny, M.; Szerypo, J.; Evensen, A.-H.; Kugler, E.; Lettry, J.; Ravn, H.; Duppen, P. van; Andreyev, A.; Huyse, M.; Woehr, A.; Jokinen, A.; Aeystoe, J.; Nieminen, A.; Huhta, M.; Ramdhane, M.; Walter, G.; Hoff, P.

1998-01-01

The recently developed methods allowing the experimental studies on new neutron-rich nuclei beyond doubly-magic 208 Pb are briefly described. An identification of new neutron-rich isotopes 215 Pb and 217 Bi, and new decay properties of 216 Bi studied by means of a pulsed release element selective technique at PS Booster-ISOLDE are reported

Experimental Cross Sections for Reactions of Heavy Ions and ²⁰⁸Pb, ²⁰⁹Bi, ²³⁸U, and ²⁴⁸Cm Targets

Energy Technology Data Exchange (ETDEWEB)

Patin, Joshua Barnes [Univ. of California, Berkeley, CA (United States)

2002-01-01

The study of the reactions between heavy ions and ²⁰⁸Pb, ²⁰⁹Bi, ²³⁸U, and ²⁴⁸Cm Cm targets was performed to look at the differences between the cross sections of hot and cold fusion reactions. Experimental cross sections were compared with predictions from statistical computer codes to evaluate the effectiveness of the computer code in predicting production cross sections. Hot fusion reactions were studied with the MG system, catcher foil techniques and the Berkeley Gas-filled Separator (BGS). 3n- and 4n-exit channel production cross sections were obtained for the ²³⁸U(¹⁸O,xn)^256-xFm, ²³⁸U(²²Ne,xn)^260-xNo, and ²⁴⁸Cm(¹⁵N,xn)^263-xLr reactions and are similar to previous experimental results. The experimental cross sections were accurately modeled by the predictions of the HIVAP code using the Reisdorf and Schaedel parameters and are consistent with the existing systematics of 4n exit channel reaction products. Cold fusion reactions were examined using the BGS. The ⁴⁸Pb(²³⁸Ca,xn)^256-xNo, ²⁰⁸Pb(⁵⁰Ti,xn)^258-xRf, ²⁰⁸Pb(⁵¹V,xn)^259-xDb, ⁵⁰Bi(²³⁸Ti,xn)^259-xDb, and ²⁰⁹Bi(⁵¹V,xn)^260-xSg reactions were studied. The experimental production cross sections are in agreement with the results observed in previous experiments. It was necessary to slightly alter the Reisdorf and Schaedel parameters for use in the HIVAP code in order to more accurately model the experimental data. The cold fusion experimental results are in agreement with current 1n- and 2n-exit channel systematics.

Evaluation of the uncertainty for the efficiency curve determination of 210Pb by liquid scintillation

International Nuclear Information System (INIS)

Sampaio, C.S.; Sousa, W.O.; Dantas, B.M.

2014-01-01

Methodologies for the evaluation of uncertainties associated with the determination of the efficiency curve of 210 Pb by liquid scintillation counting (LSC) are presented. No statistical difference were found when compared the uncertainties of the curves that represented the counting net before and after the secular equilibrium between 210 Pb and 210 Bi, nether when compared the curves when counting only 210 Pb and the curve with the total count of 210 Pb and 210 Bi, for the same time interval after precipitation. (author)

Multineutron emission cross-sections of Pb-208 and Bi-209 for use in fusion technology

International Nuclear Information System (INIS)

Garg, S.

1995-01-01

Pb-208 and Bi-209 are considered as promising materials for fusion blankets because of their superior neutron multiplying characteristics. In this paper, emission cross-sections for neutrons, protons, alpha-particles and gamma-rays are investigated for these nuclides in the energy range 8-30 MeV using the framework of the multistep Hauser-Feshbach statistical theory combined with the Kalbach exciton model for the pre-equilibrium decay and the Brink - Axel model of the giant dipole resonance to account for the radiative capture competition. Appropriate optical model potential parameters are selected to evaluate the compound nucleus reaction cross-sections at different neutron incident energies. (n,n'), (n,2n), (n,3n), (n,4n) and the total production cross-sections for neutrons, protons, alpha-particles and gamma-rays are inferred by performing consistent calculations. (author). 22 refs, 3 figs

Observation of a three-dimensional vortex-line liquid in a highly c-axis-oriented (Bi,Pb)2Sr2Ca2Cu3Ox silver-sheathed tape

International Nuclear Information System (INIS)

Sun, Y.; Xu, G.; Du, J.; Zhou, Y.; Zeng, R.; Fu, X.; Hua, P.; Zhang, Y.

1996-01-01

We have measured the temperature dependence of resistance of a highly c-axis-oriented (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O x silver-sheathed tape in the mixed state using the dc flux transformer geometry. In the vortex fluid regime, we have observed the onset of a nonlocal conductivity which corresponds to the peak (T peak ) in R bot (T) curves. This can be explained qualitatively in terms of the vortex decoupling which arises from an increased thermal fluctuation. At T peak , the vortices are three dimensional (3D) in character. This behavior is quite different from the results obtained recently by Safar et al. [Phys. Rev. Lett. 69, 824 (1992)] and Busch et al. [Phys. Rev. Lett. 69, 522 (1992)] in Bi 2 Sr 2 CaCu 2 O y single crystals using the same measuring method. Their results show that the vortices are two dimensional in character. The difference of the vortex dimensionality between (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O x and Bi 2 Sr 2 CaCu 2 O y superconductors in the vortex liquid regime may be attributed to different anisotropies due to their different crystal structures and pinning disorders. In a 3D vortex line liquid, the results reveal that dissipation seems to originate from the thermally activated plastic motion of a pinned vortex line liquid. The field and temperature dependence of the activation energy is as follows: U(H,T)=U 0 (1-T/T c )H -0.45 . copyright 1996 The American Physical Society

Comparative study of gamma ray shielding and some properties of PbO–SiO2–Al2O3 and Bi2O3–SiO2–Al2O3 glass systems

International Nuclear Information System (INIS)

Singh, K.J.; Kaur, Sandeep; Kaundal, R.S.

2014-01-01

Gamma-ray shielding properties have been estimated in terms of mass attenuation coefficient, half value layer and mean free path values, whereas, structural studies have been performed in terms of density, optical band gap, glass transition temperature and longitudinal ultrasonic velocity parameters. X-ray diffraction, UV–visible, DSC and ultrasonic techniques have been used to explore the structural properties of PbO–SiO 2 –Al 2 O 3 and Bi 2 O 3 –SiO 2 –Al 2 O 3 glass systems. - Highlights: • Bi 2 O 3 –SiO 2 –Al 2 O 3 and PbO–SiO 2 –Al 2 O 3 glasses can replace conventional concretes as gamma-ray shielding materials. • Gamma-ray shielding properties improve with the addition of heavy metals. • Rigidity deteriorates with the increase in the content of heavy metals. • Bi 2 O 3 –SiO 2 –Al 2 O 3 glass system is better than PbO–SiO 2 –Al 2 O 3 glass system in terms of gamma-ray shielding as well as structural properties

Electronic structure of Pr doped into superconducting Bi-Pb-Sr-Ca-Cu-O ceramics

International Nuclear Information System (INIS)

Egorov, A.I.; Karazhanova, G.I.; Smirnov, Yu.P.; Sovestnov, A.E.; Tyunis, A.V.; Shaburov, V.A.

1992-07-01

The shift of K α 1 and K β 1 X-ray lines of Pr in HTS-ceramic Bi 1.7 Pb 0.3 Sr 2-x Pr x Ca 2 Cu 3 O y (0,10≤x≤0,50, refer to PrF 3 ) are measured experimentally. The valence m(x), the charge q(x) and the 4f(x)-, 5d(x)-levels population of Pr are determined from experimental shifts. It is found that the Pr valence is near 3; the small valence increasing m≅3,04 at x=0,1 is observed. The small of Pr 5d-electron localization in ceramics in comparison with PrF 3 is revealed (∼0,1-0,2 5d-electron per Pr-atom). The probable cause of the superconductivity suppression in Y 1-x Pr xB a 2 Cu 3 O 7-δ system is discussed. 26 refs.; 6 figs.; 1 tab

A study of the life expectancy of cooling towers

International Nuclear Information System (INIS)

Bolvin, M.; Chauvel, D.

1993-01-01

The paper describes the following different tasks of the study whose aim was to extend the life time of cooling towers for French Nuclear Power plants to 40 years. The aging factors specific to cooling towers were measured and analysed with regard to the external surface, the internal surface and inside the concrete. The safety coefficient for buckling was calculated and then the stress analysis of the materials (concrete and steel) was done. A special computer program written for cooling towers was used with a model including the soil stiffness and the supports of the tower. (author)

Investigation of radiation shielding properties for MeO-PbCl2-TeO2 (MeO = Bi2O3, MoO3, Sb2O3, WO3, ZnO) glasses

Science.gov (United States)

Sayyed, M. I.; Çelikbilek Ersundu, M.; Ersundu, A. E.; Lakshminarayana, G.; Kostka, P.

2018-03-01

In this work, glasses in the MeO-PbCl2-TeO2 (MeO = Bi2O3, MoO3, Sb2O3, WO3, ZnO) system, which show a great potential for optoelectronic applications, were used to evaluate their resistance under high energy ionizing radiations. The basic shielding quantities for determining the penetration of radiation in glass, such as mass attenuation coefficient (μ/ρ), half value layer (HVL), mean free path (MFP) and exposure buildup factor (EBF) values were investigated within the energy range 0.015 MeV ‒ 15 MeV using XCOM program and variation of shielding parameters were compared with different glass systems and ordinary concrete. From the derived results, it was determined that MeO-PbCl2-TeO2 (MeO = Bi2O3, MoO3, Sb2O3, WO3, ZnO) glasses show great potentiality to be used under high energy radiations. Among the studied glass compositions, Bi2O3 and WO3 containing glasses were found to possess superior gamma-ray shielding effectiveness.

Influence of cooling and annealing procedure on the intergranular coupling of Ag-Bi[sub 2]Sr[sub 2]CaCu[sub 2]O[sub x] screen-printed tape. [BiSrCaCuO

Energy Technology Data Exchange (ETDEWEB)

Noji, H; Zhou, W [IRC in Superconductivity, Univ. of Cambridge (United Kingdom); Glowacki, B A [IRC in Superconductivity, Univ. of Cambridge (United Kingdom) Dept. of Materials Science and Metallurgy, Univ. of Cambridge (United Kingdom); Oota, A [IRC in Superconductivity, Univ. of Cambridge (United Kingdom) Dept. of Electric and Electronic Engineering, Toyohashi Univ. of Tech. (Japan)

1993-02-01

A study of the influence of the processing conditions of screen-printed ''Bi-2212'' tapes on their intergranular coupling properties, measured by AC susceptibility and DC transport critical current density, has been conducted. Samples have been prepared by melt-solidification and sintering on silver substrates under the same conditions but with different cooling procedures, such as slow cooling, slow cooling and reannealing, rapid cooling and quenching. The cooling rate and the annealing procedure strongly affect not only the superconducting critical temperature, Tc, but also the intergranular coupling properties of the samples. It was found that the Tc value decreases with a decrease in cooling rate. The reannealing in N[sub 2] can improve the Tc value of the slow-cooled samples. The different cooling procedures lead to the crossover of the field dependence of the AC loss-peak temperature of [chi]'' characteristics for all investigated samples. The crossover phenomena do not alter the correlation between the transport critical current density, J[sub c], versus temperature and the AC loss-peak temperature versus AC applied field for the samples in the range of the LN[sub 2] temperature (90-65 K), except for the slow-cooled one. The lack of correlation for the slow-cooled sample in this temperature range can be explained by a very significant difference of flux creep between the slow-cooled sample and the rest of the fast-cooled or reannealed samples. (orig.).

Peltier-effect in the mixed state of (Bi, Pb)2Sr2Ca2Cu3Oδ

International Nuclear Information System (INIS)

Galffy, M.; Hohn, C.; Freimuth, A.

1994-01-01

We present measurements of the Peltier-effect in the mixed state of Bi 1.76 Pb 0.24 Sr 2 Ca 2 Cu 3 O δ . The Peltier-coefficient broadens in a magnetic field quite similar to the resistivity and the thermopower. Comparison with the thermopower shows that Onsagers relation holds well. The occurrence of the Peltier-heat in the mixed state well below T c implies that the electric current is accompanied by a large heat current. We show that the vortex contribution to the Peltier-heat is negligibly small. Therefore the heat current has to be attributed to normal quasiparticle excitations. Our results indicate that this quasiparticle contribution to the heat current remains large even at temperatures far below T c . (orig.)

Aspects of severe accidents in transmutation systems

International Nuclear Information System (INIS)

Wider, H.U.; Karlson, J.; Jones, A.V.

2001-01-01

The different types of transmutation systems under investigation include accelerator driven (ADS) and critical systems. To switch off an accelerator in case of an accident initiation is quite important for all accidents. For a fast ADS the grace times available for doing so depend strongly on the total heat capacity and the natural circulation capability of the primary coolant. Cooling with heavy metal Pb-Bi has considerable advantages in this regard compared to gas cooling. Moreover it allows passive ex-vessel cooling with natural air or water circulation. In the remote likelihood of fuel melting, oxide fuel appears to mix with the Pb-Bi coolant. Fast critical systems that are cooled by Pb-Bi will automatically shut off if the flow or heat sink is lost. Reactivity accidents can be limited by a low total control rod worth. High temperature reactors can achieve only incomplete burning of actinides. If an accelerator is added to increase burn-up, a fast spectrum region is needed, which has a low heat capacity. (author)

Production and identification of new, neutron-rich nuclei in the {sup 208}Pb region

Energy Technology Data Exchange (ETDEWEB)

Rykaczewski, K. [Oak Ridge National Lab., TN (United States). Physics Div.]|[ISOLDE-CERN, Geneva (Switzerland)]|[Univ. of Warsaw (Poland); Kurpeta, J.; Plochocki, A. [Univ. of Warsaw (Poland)] [and others

1998-11-01

The recently developed methods allowing the experimental studies on new neutron-rich nuclei beyond doubly-magic {sup 208}Pb are briefly described. An identification of new neutron-rich isotopes {sup 215}Pb and {sup 217}Bi, and new decay properties of {sup 216}Bi studied by means of a pulsed release element selective technique at PS Booster-ISOLDE are reported.

Corrosion behavior of austenitic and ferritic/martensitic steels in oxygen-saturated liquid Pb-Bi eutectic at 450circC and 550circC

OpenAIRE

倉田 有司; 二川 正敏; 斎藤 滋

2005-01-01

Static corrosion tests of various austenitic and ferritic/martensitic steels were conducted in oxygen-saturated liquid Pb-Bi at 450circC and 550circC for 3000h to study the effects of temperature and alloying elements on corrosion behavior. Oxidation, grain boundary corrosion, dissolution and penetration were observed. The corrosion depth decreases at 450circC with increasing Cr content in steels regardless of ferritic/martensitic or austenitic steels. Appreciable dissolution of Ni and Cr doe...

Residual tensile stresses and piezoelectric properties in BiFeO3-Bi(Zn1/2Ti1/2O3-PbTiO3 ternary solid solution perovskite ceramics

Directory of Open Access Journals (Sweden)

Weilin Zheng

2016-08-01

Full Text Available For low dielectric loss perovskite-structured (1-x-yBiFeO3-xBi(Zn1/2Ti1/2O3-yPbTiO3 (BF-BZT-PT (x = 0.04-0.15 and y = 0.15-0.26 ceramics in rhombohedral/tetragonal coexistent phase, structural phase transitions were studied using differential thermal analyzer combined with temperature-dependent dielectric measurement. Two lattice structural phase transitions are disclosed in various BF-BZT-PT perovskites, which is different from its membership of BiFeO3 exhibiting just one lattice structural phase transition at Curie temperature TC= 830oC. Consequently, residual internal tensile stresses were revealed experimentally through XRD measurements on ceramic pellets and counterpart powders, which are reasonably attributed to special structural phase transition sequence of BF-BZT-PT solid solution perovskites. Low piezoresponse was observed and argued extrinsically resulting from residual tensile stresses pinning ferroelectric polarization switching. Post-annealing and subsequent quenching was found effective for eliminating residual internal stresses in those BZT-less ceramics, and good piezoelectric property of d33 ≥ 28 pC/N obtained for 0.70BF-0.08BZT-0.22PT and 0.05 wt% MnO2-doped 0.70BF-0.04BZT-0.26PT ceramics with TC ≥ 640oC, while it seemed no effective for those BZT-rich BF-BZT-PT ceramics with x = 0.14 and 0.15 studied here.

Investigation on synthesis of Bi-based thin films on flat sputter-deposited Ag film by melting process

International Nuclear Information System (INIS)

Su Yanjing; Satoh, Yoshimasa; Arisawa, Shunichi; Awane, Toru; Fukuyo, Akihiro; Takano, Yoshihiko; Ishii, Akira; Hatano, Takeshi; Togano, Kazumasa

2003-01-01

We report on the fabrication of ribbon-like thin films on flat sputter-deposited Ag films whose surface smoothness remained within the order of tens of nm. It was found that the addition of Pb to the starting material improves the wettability of molten phase and facilitates the growth of Bi-2212 ribbon-like thin films on a flat Ag substrate, and that the increase of Ca and Cu in starting material suppresses the intergrowth of the Bi-2201 phase in ribbon-like thin films. By using (Bi,Pb)-2246 powders, with nominal composition of Bi 1.6 Pb 0.4 Sr 1.6 Ca 3.2 Cu 4.8 O y , as the starting material, the superconducting Bi-2212 ribbon-like thin films with an onset T c at 74 K on a very flat Ag substrate were successfully synthesized. Additionally, the growth mechanism of ribbon-like thin films on flat Ag substrate was investigated by in situ high temperature microscope observation

Determination of the fraction of amorphous phases in superconducting samples

International Nuclear Information System (INIS)

Gomes Junior, G.G.; Ogasawara, T.; Amorim, H.S.

2010-01-01

The study phase formation of high critical temperature superconducting (Bi, Pb) - 2223 by partial melting and recrystallization aims to improve the microstructure of the material. Was used for X-ray diffraction characterization of the phases present. The DDM method (Derivative Difference Minimization) was used for the refinement of structures, quantification of the phases and determination the fraction of this amorphous. The advantage this method is not necessary to introduce an internal standard to determine the amorphous fraction. Were observed in the powder precursor phases (Bi, Pb) 2 Sr 2 Ca 2 Cu 3 O x (Bi, Pb) -2223, 93% of the sample, Bi 2 Sr 2 CaCu 2 O y (Bi-2212) and Bi 2 Sr 2 CuO z (Bi-2201). The powder precursor was heat treated at 820-870 deg C. To minimize volatilization of lead, the material was placed in silver crucibles closed. To get a high recovery of (Bi, Pb) - 2223, the material was cooled slowly, due to slow kinetic of formation of this phase. We observed a partial recovery phase (Bi, Pb) -2223. (author)

Effect of Low-Melting Metals (Pb, Bi, Cd, In) on the Structure, Phase Composition, and Properties of Casting Al-5% Si-4% Cu Alloy

Science.gov (United States)

Yakovleva, A. O.; Belov, N. A.; Bazlova, T. A.; Shkalei, I. V.

2018-01-01

The effect of low-melting metals (Pb, Bi, Cd, In) on the structure, phase composition, and properties of the Al-5% Si-4% Cu alloy was studied using calculations. Polythermal sections have been reported, which show that the considered systems are characterized by the presence of liquid regions and monotectic reactions. The effect of low-melting metals on the microstructure and hardening of base alloy in the cast and heat-treated states has been studied.

Structural, Dielectric, and Electrical Properties of Bi1- x Pb x Fe1- x (Zr0.5Ti0.5) x O3

Science.gov (United States)

Panda, Niranjan; Pattanayak, Samita; Choudhary, R. N. P.

2015-12-01

Polycrystalline samples of Bi1- x Pb x Fe1- x (Zr0.5Ti0.5) x O3 (BPFZTO) with x = 0.0, 0.2, 0.3, and 0.4 were prepared by high-temperature solid-state reaction. Preliminary structural analysis of calcined powders of the materials by use of x-ray powder diffraction confirmed formation of single-phase systems with the tetragonal structure. Room-temperature scanning electron micrographs of the samples revealed uniform distribution of grains of low porosity and different dimensions on the surface of the samples. The frequency-temperature dependence of dielectric and electric properties was studied by use of dielectric and complex impedance spectroscopy over a wide range of frequency (1 kHz to 1 MHz) at different temperatures (25-500°C). The dielectric constant of BiFeO3 (BFO) was enhanced by substitution with Pb(Zr0.5Ti0.5)O3 (PZT) whereas the dielectric loss of the BPFZTO compounds decreased with increasing PZT content. A significant contribution of both grains and grain boundaries to the electrical response of the materials was observed. The frequency-dependence of the ac conductivity of BPFZTO followed Jonscher's power law. Negative temperature coefficient of resistance behavior was observed for all the BPFZTO samples. Conductivity by thermally excited charge carriers and oxygen vacancies in the materials was believed to be of the Arrhenius-type.

Sensitive stripping voltammetric determination of Cd(II) and Pb(II) by a Bi/multi-walled carbon nanotube-emeraldine base polyaniline-Nafion composite modified glassy carbon electrode

International Nuclear Information System (INIS)

Zhao, Guo; Yin, Yuan; Wang, Hui; Liu, Gang; Wang, Zhiqiang

2016-01-01

Highlights: • A MWCNT-EBP-NA composite film modified GCE was fabricated and characterized. • The GCE modified with the MWCNT-EBP-NA composite film exhibited excellent performance in the analysis of Cd(II) and Pb(II) by SWASV. • The Cd(II) and Pb(II) detection limits of the developed electrode were approximately 0.06 μg/L and 0.08 μg/L, respectively. • Bi/MWCNT-EBP-NA/GCE was successfully used to determine metal ions in soil samples. - Abstract: In this study, a multi-walled carbon nanotube (MWCNT)-emeraldine base polyaniline (EBP)-Nafion (NA) composite modified glassy carbon electrode (MWCNT-EBP-NA/GCE) was prepared and used for the sensitive detection of trace Pb(II) and Cd(II), with a detection limit of 0.06 μg/L for Cd(II) and 0.08 μg/L for Pb(II) (S/N = 3), by square wave anodic stripping voltammetry (SWASV). A bismuth film was prepared through the in situ plating of bismuth on the MWCNT-EBP-NA/GCE. The morphologies and electrochemical properties of the modified electrode were characterized by SWASV, scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The parameters affecting the stripping current response were investigated and optimized. The formed MWCNTs in the composite film enlarged the specific surface area of the electrode and significantly promoted electron transferring, and the formed polyaniline (PANI) enhanced the ion-exchange capacity and prevented the macromolecules in real samples from absorbing onto the surface of the electrode. The presence of NA effectively increased the stability and adhesion of the composite film, enhanced the cation-exchange capacity and improved the ability to preconcentrate metal ions. Under the optimized conditions, a linear range of 1.0 to 50.0 μg/L was achieved for both metal ions, with a detection limit of 0.06 μg/L for Cd(II) and 0.08 μg/L for Pb(II) (S/N = 3), offering good repeatability. Finally, the Bi/MWCNT-EBP-NA/GCE was used for the

Determination of ionic conductivity in the Bi-Si-O and Pb-Si-O glasses

Directory of Open Access Journals (Sweden)

Karczewski J.

2018-03-01

Full Text Available Impedance spectroscopy measurements in various gas atmospheres were carried out in order to explain the doubts about the type of carriers and the mechanism of electrical conductivity in Bi-Si-O and Pb-Si-O glasses. In bismuth silicate glass, a typical ionic conductivity with oxygen ions as charge carriers was observed. The level of electrical conductivity of the glass at 400 °C was 5 × 10-8 S·cm-1, with the activation energy of 1.3 eV and was independent of measuring atmosphere. In the case of lead silicate glasses, the conductivity changed with measuring atmosphere. Two types of charge carriers: oxygen ions and proton ions were postulated. Proton conductivity measured in wet argon at temperature 400 °C was estimated at the level of 4 × 10-8 S·cm-1 while the oxygen ions conductivity in such conditions was 78 × 10-8 S·cm-1. We suggest that both types of charge carriers are transported along the same conduction paths using oxygen defects in the glass structure.

Diffusion coefficients for Tl, Pb, Cd, In, Zn, Bi, As, Mo and Sb in hydrous rhyolite at 100-200 MPa

Science.gov (United States)

Berlo, Kim; Brooker, Richard; Wilke, Max

2014-05-01

A series of experiments have been conducted to determine the diffusivities of Tl, Pb, Cd, In, Zn, Bi, As, Mo and Sb in hydrous rhyolitic melt. Diffusion experiments used two adjoining glass cylinder of the same hydrous composition, one doped with the elements of interest at ~ 100 ppm. These couples were rapidly heated to 850, 1000 and 1150°C at 100-200 MPa for a few hours. After quenching the sectioned charges were analyzed by both synchrotron XRF (The Diamond Light Source) and LA-ICP-MS (University of Oxford). The data shows excellent correlation between these two techniques. The diffusion profiles were fitted to a 1-D diffusion couple equation to determine the diffusivities and fitting to the different temperature runs defined the Arrhenius parameters. We find that for 850°C the diffusion coefficients follow the trend Tl>Pb>Cd>Zn>In>Bi>As>Sb>Mo. Additional experiments were performed with either S or Cl added (to both sides of the diffusion couple). In general S increases the diffusion rate of all metals except Mo and Sb, which diffuse slower in the presence of S. Chlorine also speeds up the diffusion of metals with the exception of In, Mo and Sb. The systematic change in diffusivities of these metals and their different behaviour in the presence of the ligands that are also observed to be significant in volcanic gases, are important in determining the distribution of these metals during degassing (e.g. MacKenzie and Canil, 2008). This is particularly important in a dynamic environment such as a volcanic conduit. There are also implications for economic exploration and well as hazard mitigation.

Conceptual design of power conversion system for a fusion power reactor with self-cooled LiPb-blanket. EFDA Task TW2-TRP-PPCS12 - Deliverable 4

International Nuclear Information System (INIS)

Vieider, Gottfried

2002-05-01

For FPRs with self-cooled LiPb-blanket and He-cooled first wall and divertor a conceptual design of the power conversion system is developed with emphasis on component feasibility, safety, reliability and thermal efficiency. The resulting power conversion system with a steam turbine is based on proven technology for Na- and He-cooled fission reactors and is assessed to yield an overall net thermal plant efficiency of ∼40 % provided the high primary coolant temperatures of ∼700 deg C can be achieved. The required complexity of the five linked cooling systems can be expected to influence plant cost and reliability

Cold texturing of prereacted high-Tc phase Bi(Pb)SrCaCuO under triaxial stresses

International Nuclear Information System (INIS)

Langlois, P.; Massat, H.; Suryanarayanan, R.

1994-01-01

The alignment of grains in isostatically precompacted samples of prereacted Bi 1.8 Pb 0.4 Sr 2.0 Ca 2.2 Cu 3.0 O 10.3+x powder has been achieved by compressive plastic deformation under isostatic pressure at room temperature. Isostatic pressures were in the range 0.1 to 1. GPa and deformation rates were led up to 57%. Prior to sintering, X-ray diffraction measurements corroborate an expected high-Tc phase purity of nearly 85% and indicate that the as-deformed samples have been textured with the c-axes parallel to the pressing direction whilst a.c. susceptibility measurements ascertain a high transition temperature around 107 K. Intergranular connection does not occur until sintering at 850 C for 80 h and measurements indicate then that the texture has been retained. Superconducting properties themselves show sensitivity to texture through anisotropy-related distinctive irreversibility lines. (orig.)

Analysis of 210Pb and 210Po in Brazilian foods and diets

International Nuclear Information System (INIS)

Cunha, I.L.; Bueno, L.; Favaro, D.I.T.; Maihara, V.A.; Cozzollino, S.

2001-01-01

Radiochemical procedures for the analysis of 210 Pb and 210 Po in foods and diets are presented. Because of the low beta energy of 210 Pb, its analysis was based on a separation of the daughter radionuclide 210 Bi by precipitation of lead sulphate, 210 Bi ingrowing and beta counting of this nuclide. 210 Po analysis was based on wet dissolution of the sample, deposition onto silver disc and counting by alpha-spectrometry. Levels of these radionuclides in individual items and diets of selected university students were determined in order to evaluate the intakes of 210 Pb and 210 Po as well as the dose due to ingestion of foods and diets in Sao Paulo city. (author)

Effect of Sintering Time and Diameter on Bi-Pb-Sr-Ca-Cu-O Superconducting Wire Formation with TiO2 Dopant by Silver (Ag Tube

Directory of Open Access Journals (Sweden)

Cindy Al Kindi

2018-01-01

Full Text Available Pengaruh waktu sintering dan diameter terhadap pembentukan kawat superkonduktor Bi-Pb-Sr-Ca-Cu-O dengan dopan TiO2 menggunakan tabung perak (Ag menjadi penting untuk dibahas karena hal ini berpengaruh terhadap adanya suhu kritis yang merupakan syarat penting superkonduktor. Pada penelitian ini ada beberapa tahap yang dilakukan yaitu preparasi bahan, proses permesinan, penarikan kawat dan proses perlakuan panas. Serbuk BPSCCO dengan dopan TiO2 dimasukkan ke dalam tabung perak (Ag dan dikalsinasi pada temperatur 820oC selama 20 jam, lalu proses penarikan (Rolling sampai diameter 6 mm dan 2,6 mm serta sintering dilakukan pada temperatur 850oC selama 9 jam dan 30 jam untuk masing-masing ukuran diameter dengan dua kali proses sintering. Hasil penelitian menunjukkan bahwa kawat superkonduktor memiliki suhu kritis yaitu Tc onset = 99 K dan Tc zero = 70 K. Waktu yang sangat berpengaruh pada pembentukan fasa superkonduktor yaitu sintering selama 9 jam sedangkan untuk ukuran diameter kawat yang memiliki suhu kritis yaitu 6 mm, sedangkan waktu sintering selama 30 jam dapat merubah fasa BPSCCO sehingga tidak terbentuk superkonduktor melainkan konduktor dan semikonduktor. Pada diameter 2,6 mm belum menjadi ukuran yang tepat pada pembentukan kawat superkonduktor.   The influence of sintering time and diameter on the formation of Bi-Pb-Sr-Ca-Cu-O superconducting wire with doped TiO2 by silver (Ag tube becomes important to be discussed because of the presence of critical temperature which is an essential condition in superconductors. In this research there are several steps must be done that is: material preparation, machine process, wire drawing and heat process. BPSCCO powder with dopant TiO2 filled into silver (Ag tube with calcination temperature at 820oC for 20 h, then rolling process to diameter 6 mm and 2,6 mm with sintering temperature at 850oC for 9 h and 30 h for each size of diameter by twice sintering process. The results showed that

Heat treatment control of Bi-2212 coils: I. Unravelling the complex dependence of the critical current density of Bi-2212 wires on heat treatment

Science.gov (United States)

Shen, Tengming; Li, Pei; Ye, Liyang

2018-01-01

A robust and reliable heat treatment is crucial for developing superconducting magnets from several superconductors especially Bi-2212. An improper heat treatment may significantly reduce the critical current density Jc of a Bi-2212 superconducting coil, even to zero, since the Jc of Bi-2212 wires is sensitive to parameters of its heat treatment (partial melt processing). To provide an essential database for heat treating Bi-2212 coils, the dependence of Jc on heat treatment is studied systematically in 11 industrial Bi-2212 wires, revealing several common traits shared between these wires and outlier behaviors. The dependence of the Jc of Bi-2212 on heat treatment is rather complex, with many processing parameters affecting Jc, including the peak processing temperature Tp, the time at the peak temperature tp, the time in the melt tmelt, the rate at which Bi-2212 melt is initially cooled CR1, the rate at which the solidification of Bi-2212 melt occurs CR2, and the temperature Tq at which the cooling rate switches from CR1 to CR2. The role of these parameters is analyzed and clarified, in the perspective of heat treating a coil. Practical advices on heat treatment design are given. The ability of a Bi-2212 coil to follow the prescribed recipe decreases with increasing coil sizes. The size of a coil that can be properly heat treated is determined.

Bismuth zinc vanadate, BiZn2VO6: New crystal structure type and electronic structure

International Nuclear Information System (INIS)

Eliziario Nunes, Sayonara; Wang, Chun-Hai; So, Karwei; Evans, John S.O.; Evans, Ivana Radosavljević

2015-01-01

We report a combined experimental and computational study of the crystal structure and electronic properties of bismuth zinc vanadate, BiZn 2 VO 6 , known for its visible light photocatalytic activity. The crystal structure has been solved from laboratory powder X-ray diffraction data using the repeated minimisations from random starting values method. BiZn 2 VO 6 adopts a new structure type, based on the following building blocks: corner- and edge-sharing ZnO 4 tetrahedra, ZnO 6 octahedra and VO 4 tetrahedra, and Bi 2 O 12 dimers. It is the only known member of the BiM 2 AO 6 (M=Pb, Ca, Cd, Mn, Zn, Mg, Cu; A=V, P, As) family which does not appear to be structurally closely related to others. The electronic structure of BiZn 2 VO 6 , calculated by DFT methods, shows that it is an indirect gap semiconductor with a calculated band gap of 1.6 eV, which compares favourably to the experimentally measured value of 2.4 eV. - Graphical abstract: The crystal structure of BiZn 2 VO 6 , a new structure type in the BiM 2 AO 6 (M=Mg, Ca, Cd, Cu, Pb, Mn, Zn; A=V, P, As) family. - Highlights: • Structure solution from PXRD data by repeated minimisations from random starting values. • New structure type in the BiM 2 AO 6 (M=Pb, Ca, Cd, Mn, Zn, Mg, Cu; A=V, P, As) family. • Electronic structure calculation

Effects of Bi doping on dielectric and ferroelectric properties

Indian Academy of Sciences (India)

[Pb0.95(La1−Bi)0.05][Zr0.53Ti0.47]O3 (PLBZT) ferroelectric thin films have been synthesized on indium tin oxide (ITO)-coated glass by sol–gel processing. PLBZT thin films were annealed at a relatively low temperature of 550 °C in oxygen ambient. Effects of Bi doping on structure, dielectric and ferroelectric properties of ...

Microstructural development of superconducting phases in Pb-BSCCO system derived from sol-gel technique

International Nuclear Information System (INIS)

Qureshi, A.H.; Hussain, N.; Durrani, S.K.; Waqas, H.; Arshad, M.

2010-01-01

Sol-gel processing technique has been utilized to produce the gel of Pb-BSCCO system (Bi/sub 2/-xPbxSr/sub 2/Ca/sub 2/Cu/sub 3/O/sub 10/+-y, where x 0.2, 0.4, and 0.8, are the mole fraction of Pb substituted against Bi). The gel samples were subsequently heated to 800 deg. C for 2 h to obtain the powders which were then pressed and sintered at 845 deg. C for 60 h. The morphologies in the Pb-BSCCO gel, powder and sintered products were observed with scanning electron microscope (SEM) and optical microscope. The plate-like growths of the superconducting phases are evident from the SEM micrographs. The optical micrographs of sintered samples showed that the samples containing 0.2 and 0.8 mole fraction of Pb mainly consisted of dark grey and white regions, while sample having 0.4 mole fraction of Pb comprised of dark grey, light grey, and white regions. The different regions were analyzed by using energy dispersive X-rays (EDX) analyzer attached with SEM. The results revealed that the dark grey regions in all the samples represented the Bi/sub 2/Sr/sub 2/CaCu/sub 2/O/sub 8/ +- y (2212) phase whereas, light grey regions in sample (x = 0.4) constituted the Bi/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub 10/ +- y (2223) phase. The white regions in all samples depicted the presence of CuO. The best result in term of larger fraction of superconducting phase (2223) has been observed in sample containing 0.4 mole fraction of Pb. (author)

Phase chemistry and microstructure evolution in silver-clad (Bi2-xPbx)Sr2Ca2Cu3Oy filaments

International Nuclear Information System (INIS)

Luo, J.S.; Merchant, N.; Maroni, V.A.; Escorcia-Aparicio, E.; Gruen, D.M.; Tani, B.S.; Riley, G.N. Jr.; Carter, W.L.

1992-08-01

The reaction kinetics and mechanism that control the conversion of (Bi,Pb) 2 Sr 2 CaCu 2 O z (Bi-2212) + alkaline earth cuporates to (Bi, Pb) 2 Sr 2 Ca 2 Cu 3 O y (Bi-2223) in silver-clad wires were investigated as a function of equilibration temperature and time at a fixed oxygen partial pressure (7.5% O 2 ). Measured values for the fractional conversion of Bi-2223 versus time have been evaluated based on the Avrami equation. SEM and TEM studies of partially and fully converted wires have revealed that (1) the growth of Bi-2223 is two-dimensional and controlled by a diffusion process, (2) liquid phases are present during part of the Bi-2212 -> Bi-2212 conversion, and (3) segregation of the second phases occurs in early time domains of the reaction

Cooling rates and the depth of detachment faulting at oceanic core complexes: Evidence from zircon Pb/U and (U-Th)/He ages

Science.gov (United States)

Grimes, Craig B.; Cheadle, Michael J.; John, Barbara E.; Reiners, P.W.; Wooden, J.L.

2011-01-01

Oceanic detachment faulting represents a distinct mode of seafloor spreading at slow spreading mid-ocean ridges, but many questions persist about the thermal evolution and depth of faulting. We present new Pb/U and (U-Th)/He zircon ages and combine them with magnetic anomaly ages to define the cooling histories of gabbroic crust exposed by oceanic detachment faults at three sites along the Mid-Atlantic Ridge (Ocean Drilling Program (ODP) holes 1270D and 1275D near the 15??20???N Transform, and Atlantis Massif at 30??N). Closure temperatures for the Pb/U (???800??C-850??C) and (U-Th)/He (???210??C) isotopic systems in zircon bracket acquisition of magnetic remanence, collectively providing a temperature-time history during faulting. Results indicate cooling to ???200??C in 0.3-0.5 Myr after zircon crystallization, recording time-averaged cooling rates of ???1000??C- 2000??C/Myr. Assuming the footwalls were denuded along single continuous faults, differences in Pb/U and (U-Th)/He zircon ages together with independently determined slip rates allow the distance between the ???850??C and ???200??C isotherms along the fault plane to be estimated. Calculated distances are 8.4 ?? 4.2 km and 5.0 2.1 km from holes 1275D and 1270D and 8.4 ?? 1.4 km at Atlantis Massif. Estimating an initial subsurface fault dip of 50 and a depth of 1.5 km to the 200??C isotherm leads to the prediction that the ???850??C isotherm lies ???5-7 km below seafloor at the time of faulting. These depth estimates for active fault systems are consistent with depths of microseismicity observed beneath the hypothesized detachment fault at the TAG hydrothermal field and high-temperature fault rocks recovered from many oceanic detachment faults. Copyright 2011 by the American Geophysical Union.

Determination of the mean aerosol residence times in the atmosphere and additional 210Po input on the base of simultaneous determination of 7Be, 22Na, 210Pb, 210Bi and 210Po in urban air

International Nuclear Information System (INIS)

Magdalena Dlugosz-Lisiecka; Henryk Bem

2012-01-01

The significant differences in the activities of 210 Pb, 210 Bi, 210 Po and cosmogenic 7 Be and 22 Na radionuclides in the urban aerosol samples collected in the summers 2010 and 2011 in the Lodz city of Poland were observed. Simultaneous measurement of these radionuclides, after a simple modification of the one compartment model, allows us to calculate both: the corrected aerosol residence times in the troposphere (1 / 25 days) and in the lower stratosphere (103 / 205 days). The relative input of the additional sources (beside of the 222 Rn decay in the air) to the total activity concentrations of 210 Pb, 210 Bi and 210 Po radionuclides in the urban air, plays a substantial role (up to 97% of the total activity) only in the case of 210 Po. (author)

Evidence of weak pair coupling in the penetration depth of bi-based high-Tc superconductors

International Nuclear Information System (INIS)

Thompson, J.R.; Sun, Yang Ren; Ossandon, J.G.; Christen, D.K.; Chakoumakos, B.C.; Sales, B.C.; Kerchner, H.R.; Sonder, E.

1990-01-01

The magnetic penetration depth λ(T) has been investigated in Bi(Pb)SrCaCuO high-T c compounds having 2- and 3-layers of copper-oxygen per unit cell. Studies of the magnetization in the vortex state were employed and the results were compared with weak and strong coupling calculations. The temperature dependence of λ is described well by BCS theory in the clean limit, giving evidence for weak pair coupling in this family of materials. For the short component of the λ tensor, we obtain values of 292 and 220 nm (T = 0) for Bi-2212 and (BiPb)-2223, respectively

The charge-distribution differences of 209Bi, 208207206204Pb and 205203Tl investigated by elastic electron scattering and muonic X-ray data

International Nuclear Information System (INIS)

Euteneuer, H.; Friedrich, J.; Voegler, N.

1978-01-01

Elastic electron scattering cross sections and cross-section ratios have been measured for the stable Bi, Pb and Ti isotopes. The data are analysed with the Fourier-Bessel method and the charge-distribution differences of the isotonic and isotopic pairs are presented as well as the Fourier-Bessel coefficients of the seven single nuclei. To improve the accuracy of the results, muonic X-ray data are incorporated into the analysis. The measured Δrho(r) are compared with the simple shell model, where the stretching due to the additional nucleons is taken into account, and with more sophisticated HF calculations. (Auth.)

The Pb-Bi cooled XADS status of development

International Nuclear Information System (INIS)

Cinotti, Luciano; Gherardi, Giuseppe

2001-01-01

In 1998, the Research Ministers of France, Italy and Spain established a Technical Working Group (TWG) including R and D organisations and industrial companies in charge of reactor and accelerator studies, in order to identify the crucial technical issues for which R and D is needed. The recommendations of the TWG indicate the need to design and operate an experimental ADS (XADS) facility at a sufficiently large scale to become the precursor of the industrial, practical-scale transmuter. This interest is confirmed by the two-year programme which has recently started, sponsored by MURST (the Ministry of the University, Scientific and Technological Research), under the leadership of INFN for the Accelerator and of ENEA for the subcritical reactor. This programme is considered of particular relevance for the creation of a well mixed group of competencies, and it will provide important results in support to any related industrial programme. Since early 1998, the Italian ENEA, INFN, CRS4 and Ansaldo have set up a team, led by Ansaldo, to design an 80 MWth XADS, a key-step towards the assessment of the feasibility and operability of an ADS prototype. The results obtained so far allow to outline a consistent XADS configuration. The main issues investigated and the associated solutions adopted are concisely described in the paper

Analysis on Radioactive Waste Transmutation in Light Water cooled Hyb-WT

International Nuclear Information System (INIS)

Hong, Seonghee; Kim, Myung Hyun

2014-01-01

A feasibility of realization is much higher in FFHR compared with pure fusion. A combination of plasma fusion source for neutrons with a subcritical reactor at the blanket side has much higher capability in transmutation of waste as well as reactor safety compared with fission reactor options. Fusion-Fission Hybrid Reactor (FFHR) uses various coolants depending on the purpose. It is important that coolant being used should be suitable to reactor purpose, because reactor performance and the design constraints may change depending on the coolant. There are basically two major groups of coolants for FFHR. One group of coolant does not contain Li. They are Na, Pb-Bi, H 2 O and D 2 O. The other group contains Li for tritium breeding. They are Li, LiPb, LiSN, FLIBE and FLiNaBe. Currently, the issue in FFHR is its implication for radioactive waste transmutation (FFHR for WT). Because radioactive wastes of spent nuclear fuel (SNF) are transmuted using fusion neutron source. Therefore a suitable coolant should be used for effective waste transmutation. . In FFHR for WT, LiPb coolant is being used mainly because of tritium production in Li and high neutron economic through reaction in Pb. However different coolants use such as Na, Pb-Bi are used in fast reactors and accelerator driven systems (ADS) having same purpose. In this study, radioactive waste transmutation performance of various coolants mentioned above will be compared and analyzed. Through this study, the coolants are judged primarily for their support to waste transmutation disregarding their limitation to reactor design and tritium breeding capability. First, performance of the light water coolant regarding radioactive waste transmutation was analyzed among various coolants mentioned above. In this paper, performance of radioactive waste transmutation can be known depending on different volume fractions (54.53, 60.27, 97.94vol.%) of the light water. Light water dose required fusion power lower than LiPb due to

Phases and structural characteristics of high Tc superconducting oxide in (Bi, Pb)-Sr-Ca-Cu-O system

International Nuclear Information System (INIS)

Chen, Zuyano; Li, Zhengrong; Qian, Yitai; Zhou, Quien; Cheng, Tingzhu

1989-01-01

The various phases, which are responsible for variant maximum d-value including 18.5 angstrom, 15.4 angstrom, 12.2 angstrom, 6.2 angstrom, 3.2 angstrom and possible 9.1 angstrom respectively, observed in high Tc superconducting complex oxide of (Bi,Pb)-Sr-Ca-Cu-O system are reported in this paper according to the result of X-ray diffraction on platelike crystals or crystallites synthesized under different preparation conditions. The phase of tetragonal system with c=3.21 angstrom, a=3.86 angstrom is possible parent structural unit and it is of great significance to the structure constitution of various phases with large lattice parameter c and structural characteristics of superconducting oxide. In view of the above a model of two-dimension stack-up which causes a stack in variant styles along c-axis and constitute various phases with different lattice parameter c is proposed and discussed

Texturing of superconducting Bi-Pb-Sr-Ca-Cu-O ceramics by combining the effect of a magnetic field and hot pressing in one direction; Texturation des ceramiques supraconductrices Bi-Pb-Sr-Ca-Cu-O par combinaison des effets du champ magnetique et de la contrainte uniaxiale a haute temperature

Energy Technology Data Exchange (ETDEWEB)

Noudem, J G

1995-10-27

Superconducting Bi-(Pb)-Sr-Ca-Cu-O (Bi:2223) ceramics have a weak 77 K transport critical current density (Jc) due to porosity and the presence of misaligned platelets. In order to obtain higher critical current densities in these materials, it is necessary to increase their density and induce a preferential crystallographic orientation. We have developed a texturing process using solidification in a magnetic field combined with hot pressing. The experimental set-up provides a uniaxial pressure of 60 MPa and temperature up to 1100 deg C in a magnetic field of 8 T. Magnetic melt texturing (MMT) proved to be very effective in producing bulk oriented samples of polycrystalline Bi:2223 (crystallite c-axis oriented parallel to the field direction). These samples have Jc values of up to 1450 A/cm{sup 2} and a density of 5.1 g/cm{sup 3}. The texturing by hot pressing (HP) gives homogeneous, dense ({approx} 6 g/cm{sup 3}; 95 % of the theoretical limit) ceramics with a Jc of 2500 A/cm{sup 2}. Tapes of Ag/Bi:2223 provided by Alcatel Alsthom were also successful textured using HP. Finally we have demonstrated that the combination of solidification in a magnetic field with hot pressing (MMHPT) improves both the texture and density of the samples. Moreover the samples are very homogeneous and mechanically resistant. The 77 K transport critical current densities have values up to 3800 A/cm{sup 2} and 1100 A/cm{sup 2} along the (ab) and c-axis respectively. We have demonstrated that these samples are of potential use a current limiters. (author) 146 refs.

Photovoltaic applications of Cu(Sb,Bi)SM (M = Ag, Pb, Pt)

Science.gov (United States)

Tablero, C.

2017-04-01

Ternary Cu-(Sb,Bi)-S compounds are great absorbents of the solar radiation with a variety of applications including optoelectronic and photovoltaic applications. The analyses of several quaternary semiconductors derived from Cu-(Sb,Bi)-S materials is carried out using first-principles density-functional theory with orbital-dependent one-electron potentials. These analyses focus on the optoelectronic properties and the potential for solar cells. The optical properties are obtained from first-principles calculations, and split into inter- and intra-shell-species contributions in order to quantify the optical transitions responsible for the absorption. The absorption coefficients are then used as criteria to evaluate the efficiencies of these materials under several sunlight concentrations. The results indicate high energy photovoltaic conversion efficiency because of the large intra shell s-p absorption of the S and Sb or Bi atomic species.

Pb-free Radiation Shielding Glass Using Coal Fly Ash

Directory of Open Access Journals (Sweden)

Watcharin Rachniyom

2015-12-01

Full Text Available In this work, Pb-free shielding glass samples were prepared by the melt quenching technique using subbituminous fly ash (SFA composed of xBi2O3 : (60-xB2O3 : 10Na2O : 30SFA (where x = 10, 15, 20, 25, 30 and 35 by wt%. The samples were investigated for their physical and radiation shielding properties. The density and hardness were measured. The results showed that the density increased with the increase of Bi2O3 content. The highest value of hardness was observed for glass sample with 30 wt% of Bi2O3 concentration. The samples were investigated under 662 keV gamma ray and the results were compared with theoretical calculations. The values of the mass attenuation coefficient (μm, the atomic cross section (σe and the effective atomic number (Zeff were found to increase with an increase of the Bi2O3 concentration and were in good agreement with the theoretical calculations. The best results for the half-value layer (HVL were observed in the sample with 35 wt% of Bi2O3 concentration, better than the values of barite concrete. These results demonstrate the viability of using coal fly ash waste for radiation shielding glass without PbO in the glass matrices.

Self-cooled blanket concepts using Pb-17Li as liquid breeder and coolant

International Nuclear Information System (INIS)

Malang, S.; Deckers, H.; Fischer, U.; John, H.; Meyder, R.; Norajitra, P.; Reimann, J.; Reiser, H.; Rust, K.

1991-01-01

A blanket design concept using Pb-17Li eutectic alloy as both breeder material and coolant is described. Such a self-cooled blanket for the boundary conditions of a DEMO-reactor is under development at the Kernforschungszentrum Karlsruhe (KfK) in the frame of the European blanket development program. Results of investigations in the areas of design, neutronics, magneto-hydrodynamics, thermo-mechanics, ancillary loop systems, and safety are reported. Based on recent progress, it can be concluded that the boundary conditions of a DEMO-reactor can be met, tritium self-sufficiency can be obtained without using beryllium as an additional neutron multiplier, and tritium inventory and permeation are acceptably low. However, to complete judge the feasibility of the proposed concept, further studies are necessary to obtain a better understanding of the magneto-hydrodynamic phenomena and their effects on the thermal-hydraulic performance of a fusion reactor blanket. (orig.)

Preparation of Bi-Pb-Sr-Ca-Cu-O high Tc thick films on Ag or MgO substrate with superconductor paste; Bi kei ko Tc chodendo paste ni yoru Ag, MgO kibanjo eno atsumaku sakusei

Energy Technology Data Exchange (ETDEWEB)

Takabatake, N. [Ishikawa Technical High School, Ishikawa (Japan); Tsubota, T.; Ishikawa, T.; Ohashi, K. [Kanazawa Institute of Technology, Ishikawa (Japan)

1995-07-15

The following were reported on making Bi series superconducting thick films by a wet method. A paste was made by adding PSO (or ethanol solution of ethylenegrycol) of Yushiro Chemical Industry Co., Ltd. as a binder to a Bi series 2223 single-phase powder sample (blending composition Bi:Pb:Sr:Ca:Cu=1.8:0.4:2:2:3.2); the sample was then coated on an Ag (or MgO) substrate with a brush; after being dried at 105{degree}C for one hour, it was thermally decomposed at 700{degree}C for one hour; then, the process of prissurized forming (at pressure 2 to 5 ton f/cm{sup 2}) and of sintering at 845{degree}C for 20 hours or more were performed on the sample to form a thick film sample. A critical temperature Tc, critical current density Jc, etc., were measured on such thick film sample. As a result, nearly same values were obtained as Tc (93K) and Jc (84A/cm{sup 2}) which were those of a bulk sample made by using the same powder sample, pressurizing at 2 ton f/cm{sup 2} for pelletizing, and sintering at 845{degree}C for 20 hours. 6 refs., 7 figs., 1 tab.

Study of radioactive nuclides of very short half-life produced by fast neutrons; Etude de corps radioactifs a vie tres breve produits par neutrons rapides

Energy Technology Data Exchange (ETDEWEB)

Monnand, E [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-07-01

Several radionuclides, already known, with half-lives ranging from 5 10{sup -5} to 1 second were observed by pulsed irradiations of C - Mg - Al - Y - In - Tl - Pb - Bi with 14.3 MeV neutrons. These radionuclides are: {sup 12}B (20 {+-} 0.4 ms) - {sup 24m}Na (20 {+-} 0.6 ms) - {sup 88m1}Y (0.332 {+-} 0.012 ms) - {sup 88m2}Y (14.6 {+-} 0.4 ms) - {sup 114m}In (43.5 {+-} 2 ms) - {sup 202m}Tl (0.570 {+-} 0.010 ms) - {sup 204m}Tl (0.063 {+-} 0.002 ms) - {sup 205m}Pb (5.5 {+-}0.3 ms) - {sup 206m}Pb (0.126 {+-} 0.006 ms) - {sup 207m}Pb (830 {+-} 30 ms) - {sup 208m}Bi (2.56 {+-} 0.1 ms). Their half-life, the {beta} and {gamma} rays energies and the production cross sections were measured. (author) [French] Plusieurs radionucleides deja connus, de periode comprise entre 5 10{sup -5} et 1 seconde ont ete observes par irradiation pulsee avec des neutrons de 14,3 MeV, des elements suivants: C - Mg - Al - Y - In - Tl - Pb - Bi. Ces radionucleides sont: {sup 12}B (20 {+-} 0.4 ms) - {sup 24m}Na (20 {+-} 0.6 ms) - {sup 88m1}Y (0.332 {+-} 0.012 ms) - {sup 88m2}Y (14.6 {+-} 0.4 ms) - {sup 114m}In (43.5 {+-} 2 ms) - {sup 202m}Tl (0.570 {+-} 0.010 ms) - {sup 204m}Tl (0.063 {+-} 0.002 ms) - {sup 205m}Pb (5.5 {+-}0.3 ms) - {sup 206m}Pb (0.126 {+-} 0.006 ms) - {sup 207m}Pb (830 {+-} 30 ms) - {sup 208m}Bi (2.56 {+-} 0.1 ms). Leur periode, l'energie des rayonnements {beta} et {gamma} emis, et la section efficace de production ont ete mesurees. (auteur)

Transmission electron microscopy investigation of Bi-2223/Ag tapes

DEFF Research Database (Denmark)

Andersen, L.G.; Bals, S.; Tendeloo, G. Van

2001-01-01

during the tape processing, (3) a study of the grain boundaries on an atomic scale, including intergrowth investigations. Tapes with different process parameters have been compared with respect to the microstructure. A fully processed tape has on the average 50% thicker Bi-2223 grains than a tape after......The microstructure of (Bi,Pb)(2)Sr2Ca2CuOx (Bi-2223) tapes has been investigated by means of transmission electron microscopy (TEM) and high-resolution TEM. The emphasis has been placed on: (1) an examination of the grain morphology and size, (2) grain and colony boundary angles, which are formed...

Neutronic performance of two European breeder-inside-tube (BIT) blankets for DEMO: the helium-cooled ceramic LiAlO2 with Be multiplier and the water-cooled liquid Li17Pb

International Nuclear Information System (INIS)

Petrizzi, L.; Rado, V.

1995-01-01

In support of ENEA activity in the European Community Test Programme, neutron analysis has been performed on the two latest blanket designs: helium-cooled ceramic breeder-inside-tube (BIT) (with LiAlO 2 and Be multiplier) and water-cooled liquid Li 17 Pb in cylindrical modules (CM). The powerful MCNP Monte Carlo code was used (version 4.2). A detailed and accurate description of the geometrical model has been performed by inserting the main reactor details and avoiding breeder material dilution inside the modules. The tritium breeding ratio (TBR) performance is low for the solid breeder BIT blanket (with 10 ports 1.011) due mainly to low blanket coverage near the exhaust duct, and this solution should be revised. The CM Li 17 Pb blanket reaches a sufficient TBR (1.059, with ports) to rely on tritium self-sufficiency. Shielding properties, with respect to the toroidal field coils, have been estimated in a simplified model by means of the ANISN code, supplied with a nuclear data library consistent with that used by MCNP. The analysis suggests that a careful shield thickness/composition design should be used to ensure the shielding capability of the whole blanket plus shield system. (orig.)

Determination of 210Pb e 210Po in marine samples and aerosols

International Nuclear Information System (INIS)

Saito, Roberto Tatsuya

1996-01-01

In this work the methodologies for 210 Pb e 210 Po analyses in marine samples, such as fish, seaweed, sediment, and aerosol samples are presented. The 210 Pb levels in the samples were obtained by both 210 Bi and 210 Po ingrowth. The 210 Pb analysis via 210 Bi presents the following steps: 210 Pb leaching from samples with 8 M nitric acid and hydrogen peroxide; lead sulphate precipitation; conversion to carbonate; dissolution; lead sulphate precipitation; gravimetric analysis of lead; waiting of time to reach radioactive equilibrium and 210 Bi beta counting by employing a Geiger-Mueller detector with a low background radiation. The 210 Pb analysis via 210 Po presents the following steps: 210 Pb and 210 Po leaching from samples with 8 M nitric acid and hydrogen peroxide; nitric acid elimination by heating and hydrochloric acid addition; spontaneous deposition onto silver disc and alpha counting of polonium in silicon surface-barrier detector. In order to determine 210 Pb activity, the solution was percolated in the Dowex AG 1-X 8 anion exchange resin; preconditioned with 8 M nitric acid; the lead was eluted by 8 M hydrochloric acid; the solution was gently evaporated to dryness and diluted with 0.5 N hydrochloric acid. After 3-6 months a second 210 Po spontaneous deposition onto silver disc was carried out. The methodology for 210 Pb analysis via 210 Bi showed lead recoveries from 63 to 100%. In the method via 210 Po the polonium recoveries were varied from 39 to 63% under manual agitation, and from 60 to 100% under mechanical agitation. The radiochemical methods for 210 Po and 210 Pb analyses were applied in reference samples from International Atomic Energy Agency (IAEA) and the results obtained showed the good precision and accuracy of the established methods. The analysis of marine sediment samples of Antarctica presented 210 Pb and Po levels from 8 to 60 Bq.kg -1 , and fish samples from Sao Paulo Coast presented 210 Po levels from 0.5 to 5.3 Bq.kg -1 . These

Analysis of the neutron energy spectra from the sup(208)Pb (p,n) sup(208)Bi reaction at Esub(p)=200 MeV

International Nuclear Information System (INIS)

Ershov, S.N.; Fayans, S.A.; Gareev, F.A.; Pyatov, N.I.

1986-01-01

Microscopic calculation of the small-angle neutron energy spectra from the 208 Pb (p, n) 208 Bi reaction at Esub(p)=200 MeV are presented. It is shown that the distorted-wave impulse approximation and the microscopic theory of finite Fermi systems can be employed for describing the low-energy excitation region 0 <= Q <= 30 MeV with small momentum transfers. A quantitative estimate is obtained for the local charge of quasiparticles esub(q)[σtau]=0.8 that characterizes the quenching of the integral strength of spin-flip low-energy transitions and the relevant effects are discussed

Synthesis of Bi{sub 1.8}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} superconductor

Science.gov (United States)

Smith, M.G.

1996-10-29

Two-powder processes for the synthesis of superconducting (Bi, Pb)-2223/Ag-clad wires by the oxide-powder-in-the-robe are provided. The first precursor powder, of nominal stoichiometry CaCuO{sub x}, is a solution-synthesized mixture of Ca{sub 0.45}Cu{sub 0.55}O{sub 2} and CaO. Using these oxide precursor mixtures, superconducting tapes with well-aligned grains and reproducible critical current densities J{sub c} in the range of 20,000 to 26,000 A/cm{sup 2} at 75 K in self-field after annealing less than 200 hours were obtained. 2 figs.

Critical current anisotropy in Ag/(Pb,Bi){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+x} multifilamentary tapes: influence of self-magnetic field

Energy Technology Data Exchange (ETDEWEB)

Majoros, M [IRC in Superconductivity, University of Cambridge, Cambridge (United Kingdom); Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava (Slovakia); Glowacki, B A [IRC in Superconductivity, University of Cambridge, Cambridge (United Kingdom); Department of Materials Science and Metallurgy, University of Cambridge, Cambridge (United Kingdom); Campbell, A M [IRC in Superconductivity, University of Cambridge, Cambridge (United Kingdom)

2001-06-01

Two factors affect critical current anisotropy in multifilamentary Ag/(Pb,Bi){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+x} tapes - the intrinsic material anisotropy and the geometry. Experimental results on the magnetic field dependence and anisotropy of the critical current in a multifilamentary Ag/(Pb,Bi){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+x} tape after correction for self-magnetic field effects were found to fit the anisotropic Kim relation. Based on this relation a finite-element-method numerical code for solving the nonlinear Poisson equation for vector magnetic potential was adopted. It allowed the experimental data to be reproduced by back calculation and made possible the study of the interplay of self and external magnetic fields in different cases with well defined physical parameters of the material. The model was used to analyse the distribution of the critical current in individual filaments as well as to evaluate the influence of their geometrical arrangements on the critical current of the tape. The self-field critical current of an individual filament 'extracted' from the tape was compared with the critical current of the overall tape. The effect of the self-magnetic field on critical current distribution obtained by the cutting method was determined. The critical currents of the tapes with different cross sections were calculated and compared with experiments and the influence of the self-field was analysed. The anisotropic properties of a low anisotropy architecture of a multifilamentary Ag/(Pb,Bi){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+x} conductor were studied. The dependence of critical currents (normalized to self-field critical currents) on external magnetic field corrected for the self-field was found to follow nearly the same curves as those for tapes with different critical current densities (in the range 20-70 kA cm{sup -2} in a self-field), which makes the numerical model applicable to different tapes. (author)

Critical current density and flux pinning in superconducting wires and coils of silver-clad Bi-Pb-Sr-Ca-Cu-O

International Nuclear Information System (INIS)

Dou, S.X.; Liu, H.K.; Apperley, M.H.; Song, K.H.; Sorrell, C.C.; Guo, S.J.; Loberg, B.; Easterling, K.E.

1991-01-01

The critical current density (J c ) of Ag-clad of Bi-Pb-Sr-Ca-Cu-O has been measured to be about 12,000 A/cm 2 at 77 K in zero field. This wire was rolled into a tape of thickness 0.1 mm and width of 2 to 3 mm, and a coil of 35 mm diameter was formed. The J c of this coil was measured to be about 2,000 A/cm 2 at 77 K over the full length (1.00 meter) of the coil. In this paper compositions, heat treatment parameters, and cold-deformation for enhancement of J c are presented. The microstructure is characterized and pinning interactions as well as possible weak links are emphasised. (orig.)

Molten salt cooling/17Li-83Pb breeding blanket concept

International Nuclear Information System (INIS)

Sze, D.K.; Cheng, E.T.

1985-02-01

A description of a fusion breeding blanket concept using draw salt coolant and static 17 Li- 83 Pb is presented. 17 Li- 83 Pb has high breeding capability and low tritium solubility. Draw salt operates at low pressure and is inert to water. Corrosion, MHD, and tritium containment problems associated with the MARS design are alleviated because of the use of a static LiPb blanket. Blanket tritium recovery is by permeation toward the plasma. A direct contact steam generator is proposed to eliminate some generic problems associated with a tube shell steam generator

Characteristic of the flux pinning at intergrain boundaries in bulk Bi-Pb-Sr-Ca-Cu-O superconductors

International Nuclear Information System (INIS)

Wang Yugui; Yang Yu; Xiong Xiaozhong; Yuan Songliu; Wang Shunxi

1991-02-01

The magnetization measurement shows that there are two kinds of different intergrain boundaries in the sintered Bi 1.8 Pb 0.34 Sr 1.86 Ca 2 Cu 3 O y superconductors. One has nearly no pinning force for flux line, the other can trap some flux line in the low field range where a pinning current may be sustained. When the applied field is removed, most of the remanent magnetization comes from the intergrain boundaries. The area of hysteresis loop at low field and the remanent magnetization for the cold-pressed bulk samples are significantly increased. Cold pressing results in aligning the grain orientation and raising the packing density, both of which enhanced intergrain coupling. The J c value of 1040 A/cm 2 at H = 0 and 150 A/cm 2 at H = 1 k Oe are obtained. The flux creep along the intergrain boundaries and the pinning potential energy U 0 for the coldpressed samples are also discussed

Significance of out-of-plane electronic contributions in Bi-cuprates studied by resonant photoelectron spectroscopy at the Cu2p edge

Science.gov (United States)

Janowitz, Christoph; Schmeißer, Dieter

2018-04-01

In high-temperature superconductors with a layered crystal structure, the copper-oxygen planes are commonly considered to dominate the electronic properties around the Fermi energy. As a consequence, out-of-plane contributions are often neglected in the description of these materials. Here we report on a resonant photoemission study of Pb0,4Bi1,6Sr2,0CaCu2O8 ((Pb, Bi)-2212) and Pb0,6Bi1,4Sr1.5La0.5CuO6 ((Pb, Bi)-2201)) single crystals to unravel the resonant decay mechanisms at the Cu2p absorption edge. We find evidence for a pronounced polarization dependence caused by two different Auger processes for in-plane and out-of-plane orientations. We deduce that the lowest energy valence state—which is involved in the two Auger processes—consists of three-dimensional contributions by admixed out-of-plane Sr, Bi, and O2p states. It also suggests that the doping-induced charge density is dynamic, fluctuating within the Cu-O plane, and spills out perpendicular to it. This suggests that out-of-plane electronic degrees of freedom should be included in future consistent theoretical models of these materials.

Determination of 210 Pb in mineral spring waters of Aguas da Prata city

International Nuclear Information System (INIS)

Moreira, S.R.D.

1993-01-01

Concentration levels of 210 Pb have been analyzed in 12 mineral spring waters of Aguas da Prata city. The 210 Pb concentration was determined through 210 Bi, by measuring the gross beta activity of the 210 Pb Cr O 4 precipitate after separation from interfering elements by complexation with nitrile tri acetic acid at basic pH. The 210 Bi beta activity was carried out in a low background gas flow proportional counter. Concentrations ranging from lower limit of detection to 1240 mBq/L were observed for 210 Pb. The radiochemical procedure adopted presented a chemical yield around 85% and a lower limit of detection of 4,9 mBq/L. Dose calculations were performed in order to evaluate the importance of this radionuclide to the radiation exposure due to the ingestion of these waters. Based upon measured concentrations, committed effective doses up to 1,1 mSv/y and committed doses to the bone up to 1.7 x 10 1 mSv/y were observed for 210 Pb. (author). 64 refs, 6 figs, 7 tabs

Photoconductivity in BiFeO3 thin films

Science.gov (United States)

Basu, S. R.; Martin, L. W.; Chu, Y. H.; Gajek, M.; Ramesh, R.; Rai, R. C.; Xu, X.; Musfeldt, J. L.

2008-03-01

The optical properties of epitaxial BiFeO3 thin films have been characterized in the visible range. Variable temperature spectra show an absorption onset near 2.17eV, a direct gap (2.667±0.005eV at 300K), and charge transfer excitations at higher energy. Additionally, we report photoconductivity in BiFeO3 films under illumination from a 100mW /cm2 white light source. A direct correlation is observed between the magnitude of the photoconductivity and postgrowth cooling pressure. Dark conductivities increased by an order of magnitude when comparing films cooled in 760 and 0.1Torr. Large increases in photoconductivity are observed in light.

Determination of {sup 210} Pb in mineral spring waters of Aguas da Prata city; Determinacao de {sup 210} Pb em aguas minerais da cidade de Aguas da Prata

Energy Technology Data Exchange (ETDEWEB)

Moreira, S R.D.

1994-12-31

Concentration levels of {sup 210} Pb have been analyzed in 12 mineral spring waters of Aguas da Prata city. The {sup 210} Pb concentration was determined through {sup 210} Bi, by measuring the gross beta activity of the {sup 210} Pb Cr O{sub 4} precipitate after separation from interfering elements by complexation with nitrile tri acetic acid at basic pH. The {sup 210} Bi beta activity was carried out in a low background gas flow proportional counter. Concentrations ranging from lower limit of detection to 1240 mBq/L were observed for {sup 210} Pb. The radiochemical procedure adopted presented a chemical yield around 85% and a lower limit of detection of 4,9 mBq/L. Dose calculations were performed in order to evaluate the importance of this radionuclide to the radiation exposure due to the ingestion of these waters. Based upon measured concentrations, committed effective doses up to 1,1 mSv/y and committed doses to the bone up to 1.7 x 10{sup 1} mSv/y were observed for {sup 210} Pb. (author). 64 refs, 6 figs, 7 tabs.

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process

Science.gov (United States)

Balachandran, U.

1996-06-04

A process for the preparation of amorphous precursor powders for Pb-doped Bi{sub 2}Sr{sub 2} Ca{sub 2}Cu{sub 3}O{sub x} (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains. 11 figs.

The design of aircraft brake systems, employing cooling to increase brake life

Science.gov (United States)

Scaringe, R. P.; Ho, T. L.; Peterson, M. B.

1975-01-01

A research program was initiated to determine the feasibility of using cooling to increase brake life. An air cooling scheme was proposed, constructed and tested with various designs. Straight and curved slotting of the friction material was tested. A water cooling technique, similar to the air cooling procedure, was evaluated on a curved slotted rotor. Also investigated was the possibility of using a phase-change material within the rotor to absorb heat during braking. Various phase-changing materials were tabulated and a 50%, (by weight) LiF - BeF2 mixing was chosen. It was shown that corrosion was not a problem with this mixture. A preliminary design was evaluated on an actual brake. Results showed that significant improvements in lowering the surface temperature of the brake occurred when air or water cooling was used in conjunction with curved slotted rotors.

Bismuth zinc vanadate, BiZn{sub 2}VO{sub 6}: New crystal structure type and electronic structure

Energy Technology Data Exchange (ETDEWEB)

Eliziario Nunes, Sayonara [Department of Chemistry, Durham University, South Road, Durham DH1 3LE (United Kingdom); Department of Materials Engineering, Federal University of São Carlos, 13565-905 São Carlos, SP (Brazil); Wang, Chun-Hai; So, Karwei; Evans, John S.O. [Department of Chemistry, Durham University, South Road, Durham DH1 3LE (United Kingdom); Evans, Ivana Radosavljević, E-mail: ivana.radosavljevic@durham.ac.uk [Department of Chemistry, Durham University, South Road, Durham DH1 3LE (United Kingdom)

2015-02-15

We report a combined experimental and computational study of the crystal structure and electronic properties of bismuth zinc vanadate, BiZn{sub 2}VO{sub 6}, known for its visible light photocatalytic activity. The crystal structure has been solved from laboratory powder X-ray diffraction data using the repeated minimisations from random starting values method. BiZn{sub 2}VO{sub 6} adopts a new structure type, based on the following building blocks: corner- and edge-sharing ZnO{sub 4} tetrahedra, ZnO{sub 6} octahedra and VO{sub 4} tetrahedra, and Bi{sub 2}O{sub 12} dimers. It is the only known member of the BiM{sub 2}AO{sub 6} (M=Pb, Ca, Cd, Mn, Zn, Mg, Cu; A=V, P, As) family which does not appear to be structurally closely related to others. The electronic structure of BiZn{sub 2}VO{sub 6}, calculated by DFT methods, shows that it is an indirect gap semiconductor with a calculated band gap of 1.6 eV, which compares favourably to the experimentally measured value of 2.4 eV. - Graphical abstract: The crystal structure of BiZn{sub 2}VO{sub 6}, a new structure type in the BiM{sub 2}AO{sub 6} (M=Mg, Ca, Cd, Cu, Pb, Mn, Zn; A=V, P, As) family. - Highlights: • Structure solution from PXRD data by repeated minimisations from random starting values. • New structure type in the BiM{sub 2}AO{sub 6} (M=Pb, Ca, Cd, Mn, Zn, Mg, Cu; A=V, P, As) family. • Electronic structure calculation.

Neutronics optimization of LiPb-He dual-cooled fuel breeding blanket for the fusion-driven sub-critical system

International Nuclear Information System (INIS)

Zheng Shanliang; Wu Yican

2002-01-01

The concept of the liquid Li 17 Pb 83 and Helium gas dual-cooled Fuel Breeding Blanket (FBB) for the Fusion-Driven sub-critical System (FDS) is presented and analyzed. Taking self-sustaining tritium (TBR > 1.05) and annual output of 100 kg or more fissile 239 Pu (FBR > 0.238) as objective parameters, and based on the three-dimensional Monte Carlo neutron-photon transport code MCNP/4A, a neutronics-optimized calculation of different cases was carried out and the concept is proved feasible. In addition, the total breeding ratio (Br = Tbr + Fbr) is listed corresponding to different cases

Experimental and theoretical studies of the yields of residual product nuclei produced in thin Pb and Bi targets irradiated by 40 - 2600 MeV protons

International Nuclear Information System (INIS)

Titarenko, Yu. E.; Batyaev, V.F.; Karpikhin, E.I.; Zhivun, V.M.; Ignatyuk, A.V.; Lunev, V.P.; Titarenko, N.N.; Shubin, Yu.N.; Barashenkov, V.S.

2009-10-01

The Project is aimed at experimental determining and computer-aided theoretical simulating the independent and cumulative yields of residual radioactive product nuclei in high-energy protonirradiated thin targets made of high-isotopic and natural lead ( 206 Pb, 207 Pb, 208 PB, natPb) and bismuth ( 209 Bi) that are the most probable choice to be the target materials in the acceleratordriven (hybrid) systems (ADS) coupled to a high-current proton accelerator. The yields of residual product nuclei are of great importance when estimating such basic radiation-technology characteristics of the hybrid facility targets as the total target activity, the target 'poisoning', the buildup of long-lived nuclides, the α-activity, the content of low-pressure evaporated nuclides (Hg), the content of the chemically-active nuclides that drastically spoil the corrosion resistance of the facility structure materials, etc. In view of the above, the radioactive product nuclide yields from targets materials were experimentally determined using the ITEP U-10 proton accelerator in 55 measurement runs using the monoisotopic and natural lead ( 206 Pb, 207 Pb, 208 PB, natPb) and bismuth ( 209 Bi) targets within the proton energy range fractionated minutely, namely at 0.04, 0.07, 0.10, 0.8, 1.2, 1.4, 1.6, and 2.6 GeV to cover the entire range of the internuclear hadron cascading. As a result, 5972 cumulative and independent yields of residual radioactive product nuclei, whose lifetimes range from 8 minutes to 32 years, have been measured. Besides, the cross sections for the 27 Al(p,x) 24 Na and 27 Al(p,x)7Be monitor reactions have been measured at the same proton energies together with the 27 Al(n,p) 27 Mg reaction rate that characterizes the neutron background contributions in each experiment. The experimental nuclide yields are determined by the direct γ-spectrometry method. The γ-spectrometer resolution is 1.8 keV in the 1332 keV 60 Co γ-line. The experimental γ-spectra are processed by

Anomalous atomic displacement parameters and local dynamics in the Curie range of a Pb-free relaxor ferroelectric system (Bi1-xBax)(Fe1-xTix)O3(0.36 ≤ x ≤ 0.50)

Science.gov (United States)

Singh, Anar; Moriyoshi, Chikako; Kuroiwa, Yoshihiro; Pandey, Dhananjai

2018-04-01

We report here the relaxor ferroelectric (RFE) behaviour in a multiferroic solid solution system, (Bi1-xBax)(Fe1-xTix)O3, at a critical disorder level of xC ˜ 0.35 in BiFeO3 and 0.65 (i.e., 1-xC = 0.35) in BaTiO3 similar to the 1:2 ratio of Mg2+ and Nb5+ in the canonical RFE Pb(Mg1/3Nb2/3)O3. This Pb-free system, like canonical Pb-based RFEs, does not exhibit macroscopic symmetry breaking and shows only the signatures of ergodicity breaking at Vogel-Fulcher freezing temperature (TVF). The atomic displacement parameters (ADPs) of Fe3+/Ti4+ and O2-, obtained using high wave vector (Q) and high-resolution synchrotron x-ray diffraction data as a function of temperature, show anomalous diffuse peaks in the Curie range. It is shown that the diffuse peak in ADPs is due to softening of the vibrational frequencies of the B-O chain (B = Fe3+/Ti4+ and O = O2-) below the Burns temperature (TB) followed by hardening below the characteristic temperature (T'm), which corresponds to a peak in the dielectric permittivity (ɛ').

Crystal Structure of AgBi2I7 Thin Films.

Science.gov (United States)

Xiao, Zewen; Meng, Weiwei; Mitzi, David B; Yan, Yanfa

2016-10-06

Synthesis of cubic-phase AgBi 2 I 7 iodobismuthate thin films and fabrication of air-stable Pb-free solar cells using the AgBi 2 I 7 absorber have recently been reported. On the basis of X-ray diffraction (XRD) analysis and nominal composition, it was suggested that the synthesized films have a cubic ThZr 2 H 7 crystal structure with AgBi 2 I 7 stoichiometry. Through careful examination of the proposed structure and computational evaluation of the phase stability and bandgap, we find that the reported "AgBi 2 I 7 " films cannot be forming with the ThZr 2 H 7 -type structure, but rather more likely adopt an Ag-deficient AgBiI 4 type. Both the experimental X-ray diffraction pattern and bandgap can be better explained by the AgBiI 4 structure. Additionally, the proposed AgBiI 4 structure, with octahedral bismuth coordination, removes unphysically short Bi-I bonding within the [BiI 8 ] hexahedra of the ThZr 2 I 7 model. Our results provide critical insights for assessing the photovoltaic properties of AgBi 2 I 7 iodobismuthate materials.

Effect of lead addition on the formation of superconducting phases in Bi-Sr-Ca-Cu-O ceramics

International Nuclear Information System (INIS)

Martinelli, A.E.

1991-01-01

Superconducting ceramics with starting composition Bi 2 - x Pb x Sr 2 Ca 2 Cu 3 O y (0,0 ≤ X ≤ 0,6) were prepared in order to investigate the effects of partial substitution of Pb for Bi and sintering time and atmosphere in the formation of superconducting phases. For all samples X-ray diffraction analyses were performed to estimate the amount of superconducting phases; superconductivity was analysed by dc electrical resistance and ac magnetic susceptibility measurements. The main results show that: a) the longer the sintering time (up to 168 h), the larger the volume fraction of superconducting phases with critical temperature (T c ) greater than the temperature of nitrogen liquefaction; b) by partially substituting Pb for Bi it is possible to restrain the formation of 2212 phase (T c = 80 K) and to enhance the amount of 2223 phase (T c = 105 K); C) a heat treatment under oxygen atmosphere before sintering enhances the formation of 2223 phase. (author)

Limits to the critical transport current in superconducting (Bi,Pb)2Sr2Ca2Cu3O10 silver-sheathed tapes: The railway-switch model

International Nuclear Information System (INIS)

Hensel, B.; Grasso, G.; Fluekiger, R.

1995-01-01

We have proposed the ''railway-switch'' model to describe the superconducting transport current in (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10 silver-sheathed tapes. The model assumes that in the textured polycrystalline filament the frequent small-angle c-axis tilt grain boundaries (''railway switches'') constitute strong links for the supercurrent. With the objective to identify the mechanisms that limit the critical-current density in the tapes we present measurements of the transport critical current normal to the tape plane and of the current-transfer length along the tape axis. From I-V curves we obtain the longitudinal critical-current distribution and compare it to the thickness variation of the filament. The experiments have been performed on monofilamentary powder-in-tube samples prepared in long lengths by rolling as the only tape-forming process. For all investigated samples the critical-current density at T=77 K in self-field was in the range j c =20--30 kA/cm 2 . We conclude that the dominant limitation for the transport critical current in the tapes is imposed by the low intragrain critical-current density j c c along the c axis (as compared to the in-plane critical-current density j c ab ) and by the even lower critical-current density j c t across twist boundaries or intergrowths. Possibilities for an improvement of the performance of the (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10 silver-sheathed tapes are discussed

Composite metallic sheathes: the key to low-cost, high strength (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀-based tapes?

DEFF Research Database (Denmark)

Grivel, Jean-Claude

2007-01-01

(Bi, Pb)(2)Sr2Ca2Cu3O10-based superconducting tapes were prepared by the powder- in- tube process, using a bimetallic sheath consisting of Ag and Ni. Ag was in contact with the superconducting ceramic core and acted as a protective layer against reaction between the external Ni sheath and the cor...

A green preparation method of battery grade α-PbO based on Pb-O2 fuel cell

Science.gov (United States)

Wang, Pingyuan; Pan, Junqing; Gong, Shumin; Sun, Yanzhi

2017-08-01

In order to solve the problem of high pollution and high energy consumption of the current lead oxide (PbO) preparation processes, a new clean and energy saving preparation method for high purity α-PbO via discharge of a Pb-O2 fuel cell is reported. The fuel cell with metallic lead anode, oxygen cathode, and 30% NaOH electrolyte can provide a discharge voltage of 0.66-0.38 V corresponding to discharge current range of 5-50 mA cm-2. PbO is precipitated from the NaHPbO2-containing electrolyte through a cooling crystallization process after discharge process, and the XRD patterns indicate the structure is pure α-PbO. The mother liquid after crystallization can be recycled for the next batch. The obtained PbO mixed with 60% Shimadzu PbO is superior to the pure Shimadzu PbO in discharge capacity and cycle ability.

Self-Poling of BiFeO3 Thick Films.

Science.gov (United States)

Khomyakova, Evgeniya; Sadl, Matej; Ursic, Hana; Daniels, John; Malic, Barbara; Bencan, Andreja; Damjanovic, Dragan; Rojac, Tadej

2016-08-03

Bismuth ferrite (BiFeO3) is difficult to pole because of the combination of its high coercive field and high electrical conductivity. This problem is particularly pronounced in thick films. The poling, however, must be performed to achieve a large macroscopic piezoelectric response. This study presents evidence of a prominent and reproducible self-poling effect in few-tens-of-micrometer-thick BiFeO3 films. Direct and converse piezoelectric measurements confirmed that the as-sintered BiFeO3 thick films yield d33 values of up to ∼20 pC/N. It was observed that a significant self-poling effect only appears in cases when the films are heated and cooled through the ferroelectric-paraelectric phase transition (Curie temperature TC ∼ 820 °C). These self-poled films exhibit a microstructure with randomly oriented columnar grains. The presence of a compressive strain gradient across the film thickness cooled from above the TC was experimentally confirmed and is suggested to be responsible for the self-poling effect. Finally, the macroscopic d33 response of the self-poled BiFeO3 film was characterized as a function of the driving-field frequency and amplitude.

Investigation of evaporation characteristics of polonium and its lighter homologues selenium and tellurium from liquid Pb-Bi-eutecticum

CERN Document Server

Neuhausen, J; Eichler, B

2004-01-01

The evaporation behaviour of polonium and its lighter homologues selenium and tellurium dissolved in liquid Pb-Bi-eutecticum (LBE) has been studied at various temperatures in the range from 482 K up to 1330 K under Ar/H2 and Ar/H2O-atmospheres using γ-ray spectroscopy. Polonium release in the temperature range of interest for technical applications is slow. Within short term (1h) experiments measurable amounts of polonium are evaporated only at temperatures above 973 K. Long term experiments reveal that a slow evaporation of polonium occurs at temperatures around 873 K resulting in a fractional polonium loss of the melt around 1% per day. Evaporation rates of selenium and tellurium are smaller than those of polonium. The presence of H2O does not enhance the evaporation within the error limits of our experiments. The thermodynamics and possible reaction pathways involved in polonium release from LBE are discussed.

Microstructural and magneto-transport properties of Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 1−x}Gd{sub x}Cu{sub 2}O{sub 8+δ} superconducting ceramics

Energy Technology Data Exchange (ETDEWEB)

Boudjadja, Y., E-mail: yazid.bouj@Gmail.com [NDT Laboratory, Faculty of Science and Technology, Jijel University, Jijel 18000 (Algeria); Amira, A.; Mahamdioua, N.; Saoudel, A. [NDT Laboratory, Faculty of Science and Technology, Jijel University, Jijel 18000 (Algeria); Menassel, S. [MSAR Unit, Physics Department, Constantine 1 University, Constantine 25017 (Algeria); Varilci, A.; Terzioglu, C.; Altintas, S.P. [Department of Physics, Faculty of Arts and Sciences, AIB University, Bolu 14280 (Turkey)

2017-01-15

This study aims to investigate the effect of Gd doping on the phase formation, microstructure, transport and magnetic properties of the Bi(Pb)-2212 system. A series of superconducting bulks with a nominal composition of Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 1−x}Gd{sub x}Cu{sub 2}O{sub 8+δ} with x=0, 0.05, 0.10 and 0.15 are synthesized by the solid state synthesis route. The formed samples are characterized by means of X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDS), electrical transport and magnetic measurements. The experiment results reveal that all the samples doped are composed of Bi-2212 phase and traces of Bi-2201 secondary phase when compared to the undoped sample. The refinement of cell parameters shows that the doping reduces the cell volume of the samples. The texture degree decreases with doping while the degree of orthorhombicity increases. Quantitative EDS analysis confirms that Gd atoms are successfully introduced into crystalline structure. The SEM micrographs show randomly distributed grains with a flake-like shape. The highest value of onset critical transition temperatures is obtained for x=0.10 and is about 90.22 K, which correlates well with the observed slope of resistivity and the hole concentration of the CuO{sub 2} layers. Magnetic hysteresis loops suggest that the diamagnetism, remanant magnetization and lower critical field are better for x=0.10. Based on the enhancements of both grain boundary weak-links and flux pinning centers, improvement of the critical current densities and flux pinning density is obtained with this kind of doping.

Pyroelectric Study on Dipolar Alignment in 0.69Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 Single Crystals

Institute of Scientific and Technical Information of China (English)

ZHAO Liang; SHEN Ming-Rong; CAO Wen-Wu

2012-01-01

Pyroelectric measurements are conducted during zero-Geld heating in [001], [110] and [111] poled 0.69Pb(Mg1/3 Nb2/3)O3-0.31PbTiO3 single crystals. Compared to the room-temperature-poled samples, the crystals poled by using the Rield cooling method show broad but well recognizable pyroelectric current peaks near 190℃, which is much higher than the Curie point (126℃) of the crystal. We propose that this peak of the crystals poled by field-cooling above the Curie point is ascribed to the order-disorder transition of the dipoles in polar nano-regions formed at the Burns temperature.%Pyroelectric measurements are conducted during zero-field heating in [001],[110] and [111] poled 0.69Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 single crystals.Compared to the room-temperature-poled samples,the crystals poled by using the field cooling method show broad but well recognizable pyroelectric current peaks near 190℃,which is much higher than the Curie point (126℃) of the crystal.We propose that this peak of the crystals poled by field-cooling above the Curie point is ascribed to the order-disorder transition of the dipoles in polar nano-regions formed at the Burns temperature.

Cooling age of the Birimian juvenile crust in West Africa. U-Pb, Rb-Sr and K-Ar data on the 2.1 Ga granite-greenstone terrains from SW-Niger

International Nuclear Information System (INIS)

Lama, C.; Dautel, D.; Zimmermann, J.L.; Cheilletz, A.; Pons, J.

1994-01-01

A comparison between zircon U-Pb, whole-rock Rb-Sr and biotite-amphibole K-Ar data on Birimian granite-greenstone terrains from SW-Niger indicates that the youngest granitic plutons were emplaced at 2.115 ± 5 Ma and that both the plutons and the surrounding greenstones yield cooling ages around 2.118 Ma. The age similarity between the end of the plutonism and the cooling of plutons and surrounding greenstone further suggests rapid cooling at the end of the plutonic event and, thus, corroborates a model of greenstone metamorphism linked to the thermal effect of the plutons. (authors)

Optical non-linearity tuning in Ca{sub 8-x}Pb{sub x}MBi(VO{sub 4}){sub 7} whitlockite-type systems

Energy Technology Data Exchange (ETDEWEB)

Beskorovaynaya, Daria A., E-mail: darya.beskorovajnaya@list.ru [Chemistry Department, Moscow State University, 119991 Moscow (Russian Federation); Department of Physical and Colloid Chemistry, Gubkin Russian State University of Oil and Gas, 119991 Moscow (Russian Federation); Deyneko, Dina V. [Chemistry Department, Moscow State University, 119991 Moscow (Russian Federation); Shubnikov Institute of Crystallography RAS, 119333 Moscow (Russian Federation); Baryshnikova, Oksana V. [Chemistry Department, Moscow State University, 119991 Moscow (Russian Federation); Stefanovich, Sergey Yu. [Chemistry Department, Moscow State University, 119991 Moscow (Russian Federation); L.Ya. Karpov Institute of Physical Chemistry, 105064 Moscow (Russian Federation); Lazoryak, Bogdan I. [Chemistry Department, Moscow State University, 119991 Moscow (Russian Federation)

2016-07-25

Ca{sub 8-x}Pb{sub x}MBi(VO{sub 4}){sub 7}, M{sup 2+} = Mg{sup 2+}, Zn{sup 2+} (0 ≤ x ≤ 1.5) and M{sup 2+} = Ca{sup 2+}, Cd{sup 2+} (0 ≤ x ≤ 2) solid solutions with whitlockite-type structure have been prepared by solid state reactions in the form of powders and ceramics. Ferroelectric phase transitions (FPT) are revealed in the cause of dielectric, calorimetric and temperature second harmonic generation (SHG) investigations. It is found that ferroelectric Curie points in solid solutions decrease with x from 1000–1070 K to 730–800 K. The intensity of SHG firstly increases with x and then decreases, the highest SHG signal belongs to Ca{sub 7}PbCdBi(VO{sub 4}){sub 7} and Ca{sub 6.5}Pb{sub 1.5}CdBi(VO{sub 4}){sub 7}. Variation of Pb{sup 2+} concentration is shown to have a minor influence on the coherence length, therefore the SHG augmentation in solid solutions is attributed to optical nonlinear coefficient . The structure of Ca{sub 6.5}Pb{sub 1.5}MgBi(VO{sub 4}){sub 7} is resolved and crystal structure changes in solid solutions are analyzed. The results are interpreted in view of site occupancy by two- and trivalent cations and their influence on formation of spare space essential for Pb{sup 2+} and Bi{sup 3+} non-bonded electrons stereo-activity in whitlockite-type crystal structures. For the first time contribution to optical nonlinearity from VO{sub 4}{sup 3−} anionic groups in different positions is also discussed. - Highlights: • The Curie temperatures of ferroelectric Ca{sub 8-x}Pb{sub x}MBi(VO{sub 4}){sub 7} solid solutions are chemically controlled from 1070 down to 730–800 K. • Optical SHG non-linear coefficient in Ca{sub 8-x}Pb{sub x}MBi(VO{sub 4}) strongly increase up to 3.3 pm/V at an optimized Pb and Bi concentration. • Structure-property correlations in the whitlockites includes crystal site positions occupancy by two- and trivalent cations.

Inhomogeneous electronic structures in heavily Pb-doped Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub y} single crystals probed by low temperature STM/STS

Energy Technology Data Exchange (ETDEWEB)

Kinoda, Go; Nakao, Shoichiro; Motohashi, Teruki; Nakayama, Yuri; Shimizu, Keisuke; Shimoyama, Junichi; Kishio, Koji; Hanaguri, Tetsuo; Kitazawa, Koichi; Hasegawa, Tetsuya

2003-05-15

We have performed cryogenic scanning tunneling microscopy/spectroscopy (STM/STS) of heavily Pb-doped Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub y} single crystals to investigate local electronic structures in the overdoped regime. The obtained STM/STS results at 4.3 K clearly showed local inhomogeneity of gap structure {delta} ({delta}=20-60 meV) in a scale of several nm, suggesting the coexistence of superconducting and pseudogap-like regions, even in the overdoped regime.

Raman scattering study of phonons in Bi-based superconductor thin films

International Nuclear Information System (INIS)

Mejia-Garcia, C.; Diaz-Valdes, E.; Contreras-Puente, G.; Lopez-Lopez, J.L.; Jergel, M.; Morales, A.

2004-01-01

Raman spectra were obtained from samples of Bi-Pb-Sr-Ca-Cu-O (BPSCCO) thin films after varying several growth parameters, such as covering material, annealing time (t R ), annealing temperature (T R ), and nominal lead content (x). Thin films with the nominal composition Bi 1.4 Pb x Sr 2 Ca 2 Cu 3 O δ were grown on MgO substrates by a spray pyrolysis technique, followed by a solid state reaction. The results of Raman scattering measurements at room temperature show a series of vibrational optical modes within the range 300-900 cm -1 . The assignment of these modes was made by involving mainly the 2212 and 2223 phases and was confirmed by both X-ray diffraction and resistance in dependence of the temperature (R-T) measurements as well

Calculation of neutron cross sections for sup 9 sup 0 Zr, sup 2 sup 0 sup 8 Pb and sup 2 sup 0 sup 9 Bi in the energy range of 0.5-25 MeV by using the optical model potentials

CERN Document Server

Miah, M M H; Faruque, M R I

2003-01-01

Neutron total cross sections and differential elastic scattering cross sections for the nuclides sup 9 sup 0 Zr, sup 2 sup 0 sup 8 Pb and sup 2 sup 0 sup 9 Bi were calculated using different global spherical optical potential (SOP) parameter sets at neutron energies from 0.5-25 MeV. Calculated cross sections for the corresponding nuclides were compared with their experimental data obtained by the EXFOR file to select the best fit parameter sets. It is found that the parameter sets of Ferer Rapaport for sup 9 sup 0 Zr and Bechetti and Greenless for sup 2 sup 0 sup 8 Pb and sup 2 sup 0 sup 9 Bi are the best fitted set to obtain the experimental data of total cross sections and angular distributions of these nuclides. (author)

OXIDACIÓN ELECTROQUÍMICA DE LAMBDACIALOTRINA SOBRE ELECTRODOS DE PBO2-BI

Directory of Open Access Journals (Sweden)

Leonardo Cifuentes

2015-09-01

Full Text Available The electrochemical oxidation of lambdacyhalotrin in a triton X-100 water solution on a PbO2-Bi electrode has been studied. It was discovered that electrocatalytic degradation proceeded through the Langmuir-Hinshelwood (L-H mechanism. The Langmuir adsorption equilibrium constant of the organic compound on the PbO2-Bi surface (0.67 (±0.02 mg-1L and the L-H maximum reaction rate for lambdacyhalotrin oxidation (0.040 (±0.002 mg L-1 min-1 was also determined on the basis of kinetic data. Oxidation/mineralization was tested at electrode potential higher than 2.3 V vs. Ag/AgCl, in this conditions the higher degradation percent of 85 (±4 % has been obtained.

Evaluation of matrix effect on the determination of rare earth elements and As, Bi, Cd, Pb, Se and In in honey and pollen of native Brazilian bees (Tetragonisca angustula - Jataí) by Q-ICP-MS.

Science.gov (United States)

de Oliveira, Fernanda Ataide; de Abreu, Adriana Trópia; de Oliveira Nascimento, Nathália; Froes-Silva, Roberta Eliane Santos; Antonini, Yasmine; Nalini, Hermínio Arias; de Lena, Jorge Carvalho

2017-01-01

Bees are considered the main pollinators in natural and agricultural environments. Chemical elements from honey and pollen have been used for monitoring the environment, the health of bees and the quality of their products. Nevertheless, there are not many studies on honey and pollen of native Brazilian bees. The goal of this work was to determine important chemical elements (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Lu and Yb) along with As, Bi, Cd, Pb, Se and In, in honey and pollen of native Brazilian bees, assessing analytical interferences from the matrix. A proposed analytical method was developed for these elements by quadrupole ICP-MS. Matrix effect was verified in honey matrix in the quantification of As, Bi and Dy; and in pollen matrix for Bi, Cd, Ce, Gd, La, Pb and Sc. The quality of the method was considered satisfactory taking into consideration the recovery rate of each element in the spiked solutions: honey matrix (91.6-103.9%) and pollen matrix (94.1-115.6%). The quantification limits of the method ranged between 0.00041 and 10.3μgL -1 for honey and 0.00041-0.095μgL -1 for pollen. The results demonstrate that the method is accurate, precise and suitable. Copyright © 2016 Elsevier B.V. All rights reserved.

Progress report on neutron beam experiments in Thailand: effects of antimony substitutions on the critical temperature of Bi-Pb-Sr-Ca-Cu-O compounds

Energy Technology Data Exchange (ETDEWEB)

Sangariyavanich, A; Ampornrat, P [Office of Atomic Energy for Peace, Bangkok (Thailand)

1998-10-01

Effects of systematic substitutions of antimony for bismuth in Bi{sub 1.8-x}Pb{sub 0.2}Sb{sub x}Sr{sub 2}Ca{sub 3}Cu{sub 4}O{sub 10} have been investigated. Fabrication of the specimens has been performed by solid state reaction in air. The samples were sintered between 820degC - 843degC for 65 hours and subsequently quenched in liquid nitrogen. The critical temperatures of most specimens as determined by standard four-probe technique was higher than 100 K. Phase identification by X-ray diffraction technique indicated that `2223` and `2234` were the predominant phases in these samples. (author)

Solidified structure of Al-Pb-Cu alloys

International Nuclear Information System (INIS)

Ikeda, Tetsuyuki; Nishi, Seiki; Kumeuchi, Hiroyuki; Tatsuta, Yoshinori.

1986-01-01

Al-Pb-Cu alloys were cast into bars or plates in different two metal mold casting processes in order to suppress gravity segregation of Pb and to achieve homogeneous dispersion of Pb phase in the alloys. Solidified structures were analyzed by a video-pattern-analyzer. Plate castings 15 to 20 mm in thickness of Al-Pb-1 % Cu alloy containing Pb up to 5 % in which Pb phase particles up to 10 μm disperse are achieved through water cooled metal mold casting. The plates up to 5 mm in thickness containing Pb as much as 8 to 10 % cast in this process have dispersed Pb particles up to 5 μm in diameter in the surface layer. Al-8 % Pb-1 % Cu alloy bars 40 mm in diameter and 180 mm in height in which gravity segregation of Pb is prevented can be cast by movable and water sprayed metal mold casting at casting temperature 920 deg C and mold moving speed 1.0 mm/s. Pb phase particles 10 μm in mean size are dispersed in the bars. (author)

Mechanical properties of Bi,Pb(2223) single filaments and Ic(ε) behaviour in longitudinally strained tapes

International Nuclear Information System (INIS)

Passerini, Reynald; Dhalle, Marc; Seeber, Bernd; Fluekiger, Rene

2002-01-01

The Young's modulus and fracture stress of isolated Bi,Pb(2223) filaments were deduced from three-point bending tests performed at different stages of the tapes preparation. These results were introduced in the model describing the evolution of critical current of tapes submitted to a longitudinal strain in view to predict their irreversible strain limit ε irr . These calculated irreversible strain limits were compared to measured values, taken from a set of tapes made with different filling factors and composite matrices. This experiment shows that the predicted irreversible strain limits correspond to the measured ones. Presenting the I c behaviour of highly stressed tapes in a magnetic field, we discuss the evolution of the ratio I strong c0 /I c0 versus strain. This value, representative of the fraction of the critical current attributed to strongly connected grains, increases significantly during the crack formation regime at ε > ε irr . This indicates that mechanically weak links correspond to electromagnetically weak ones. This result is further confirmed by comparing the modulus of rupture obtained in single filaments extracted from tapes with different I c values

Mechanical and fatigue properties of martensitic 20X13 and austenitic 12X18H10T at interaction with lead nad lead-bismuth melts

International Nuclear Information System (INIS)

Yas'kiv, O.I.; Fedirko, V.M.

2013-01-01

The effect of Pb and Pb-Bi melts on mechanical properties and fatigue of Fe-13Cr and Fe-18Cr-10Ni-Ti steels in temperature interval 250...750 deg C has been investigated. It was shown that metal melts lead to increasing of strength of Fe-13Cr steel on 10...20 % as compared with vacuum and this effect increases with temperature rising. Fe-13Cr steel is prone to liquid metal embrittlement in temperature interval 350...450 deg C, particularly in Pb-Bi melt. Mechanical properties of Fe-18Cr-10Ni-Ti are not affected by metal melts. Both Pb and Pb-Bi assist in reducing of fatigue life of steels and this effect is more significant in Pb-Bi

Determination of 210Pb by direct gamma-ray spectrometry, beta counting via 210Bi and alpha-particle spectrometry via 210Po in coal, slag and ash samples from thermal power plant

International Nuclear Information System (INIS)

Seslak, Bojan; Vukanac, Ivana; Kandic, Aleksandar; Durasevic, Mirjana; Eric, Milic; Jevremovic, Aleksandar

2017-01-01

In order to compare three different techniques and estimate radiological impact, activity concentration of 210 Pb in coal, slag and ash samples from thermal power plant 'Nikola Tesla', Serbia, were measured, and results are presented in this study. Determination of 210 Pb was carried out in three ways: using HPGe gamma spectrometer and via in-growth of 210 Po and 210 Bi by alpha-particle spectrometry and proportional counting, respectively. The results obtained for three different techniques were compared. Statistical analysis and comparison of methods were carried out by combination of Z score and χ 2 statistical tests. Tests results, as well as values of measured activities concentrations obtained by alpha and gamma spectrometry, showed that gamma spectrometry is a valid alternative to time-consuming alpha spectrometry for low level activity measurements of 210 Pb. This remark is also valid even for gamma spectrometers with poor efficiency in low energy region. (author)

Effect of Bi on graphite morphology and mechanical properties of heavy section ductile cast iron

Directory of Open Access Journals (Sweden)

Song Liang

2014-03-01

Full Text Available To improve the mechanical properties of heavy section ductile cast iron, bismuth (Bi was introduced into the iron. Five castings with different Bi content from 0 to 0.014 wt.% were prepared; and four positions in the casting from the edge to the center, with different solidification cooling rates, were chosen for microstructure observation and mechanical properties test. The effect of the Bi content on the graphite morphology and mechanical properties of heavy section ductile cast iron were investigated. Results show that the tensile strength, elongation and impact toughness at different positions in the five castings decrease with a decrease in cooling rate. With an increase in Bi content, the graphite morphology and the mechanical properties at the same position are improved, and the improvement of mechanical properties is obvious when the Bi content is no higher than 0.011wt.%. But when the Bi content is further increased to 0.014wt.%, the improvement of mechanical properties is not obvious due to the increase of chunky graphite number and the aggregation of chunky graphite. With an increase in Bi content, the tensile fracture mechanism is changed from brittle to mixture ductile-brittle fracture.

Hydride generation – in-atomizer collection of Pb in a quartz trap-and-atomizer device for atomic absorption spectrometry – an interference study

Energy Technology Data Exchange (ETDEWEB)

Novotný, Pavel [Institute of Analytical Chemistry of the ASCR, v.v.i., Veveří 97, 602 00 Brno (Czech Republic); High School in Hořice, Husova 1414, 508 01 Hořice (Czech Republic); Kratzer, Jan, E-mail: jkratzer@biomed.cas.cz [Institute of Analytical Chemistry of the ASCR, v.v.i., Veveří 97, 602 00 Brno (Czech Republic)

2013-01-01

Interferences of selected hydride forming elements (As, Sb, Bi, Se and Sn) on lead determination by hydride generation atomic absorption spectrometry were extensively studied in both on-line atomization and preconcentration (collection) modes. The commonly used on-line atomization mode was found free of significant interferences, whereas strong interference from Bi was observed when employing the preconcentration mode with plumbane collection in a quartz trap-and-atomizer device. Interference of Bi seems to take place in the preconcentration step. Interference of Bi in the collection mode cannot be reduced by increased hydrogen radical amount in the trap and/or the atomizer. - Highlights: ► Interference study on Pb determination by in-atomizer trapping was performed for the first time. ► Bi was found as a severe interferent in the preconcentration mode (Pb:Bi ratio 1:100). ► No interference was found in the on-line atomization (no preconcentration). ► Bi interference occurs during preconcentration.

Investigation on the phase transformation of Bi-2223/Ag superconducting tapes during heating

International Nuclear Information System (INIS)

Huang, K.-T.; Qu, T.-M.; Xie, P.; Han, Z.

2013-01-01

Highlights: • In situ resistance measurement was carried out on Bi-2223/Ag superconducting tapes. • The oxygen partial pressure of the outlet gas in the heating process was monitored continuously. • The samples quenched in the heating process were studied by XRD and T c measurements. • The heating process contains three procedures: oxygen diffusion, Pb-rich phase evolution and liquid phase formation. -- Abstract: The phase transformation of Bi-2223/Ag superconducting tapes during heating was investigated. The resistance of the ceramic core as a function of the heating temperature was measured in situ. The pO 2 of the outlet gas in the heating process was also monitored continuously. By comparing the heating process with the X-ray diffraction and T c measurements taken from samples quenched at different temperatures, we have identified that the heating process could be divided into the following regions: (1) the oxygen diffusion (OD) region, which is mainly influenced by OD; (2) the Pb-rich phase evolution (PbE) region, in which the formation and decomposition of the Pb-rich phases occur; (3) the liquid phase formation (LF) region, in which resistance increased rapidly with increasing temperature

Superconductivity in the Bi-Sr-Ca-Cu-O compounds some characteristics

International Nuclear Information System (INIS)

Escudero, R.

1989-01-01

The authors have prepared 90% single phase bulk samples of the 110K superconducting phase of the Bi-Sr- Ca-Cu-O compounds with different Pb amounts. This paper presents critical superconducting temperatures (zero resistance) of up to 109K were measured in the bulk samples. X-ray powder diffraction patterns of the almost isolated 110K phase. Computer simulated diffractograms were obtained, which are in general agreement with the measured ones. A discussion of the role of Pb in the stability of the 110K phase in this compounds is presented. Tunnelling measurements were made using Bi-based material. The authors studied break junctions and point contact junctions. The energy gap was determined to be about 25.5 meV and the ratio 2Δ/KBTc = 7.5. The data also show structure at energies of 67 and 120 meV

alpha-decay spectroscopy of light odd-odd Bi isotopes - II sup 1 sup 8 sup 6 Bi and the new nuclide sup 1 sup 8 sup 4 Bi

CERN Document Server

Andreyev, A N; Ackermann, D; Münzenberg, G; Hessberger, F P; Hofmann, S; Kojouharov, I; Kindler, B; Lommel, B; Huyse, M; Vel, K V D; Duppen, P V; Heyde, Kris L G

2003-01-01

Alpha-decay of the new nuclide sup 1 sup 8 sup 4 Bi has been studied in the complete-fusion reaction sup 9 sup 3 Nb( sup 9 sup 4 Mo, 3n) sup 1 sup 8 sup 4 Bi at the velocity filter SHIP. The evaporation residues were separated in-flight and subsequently identified on the basis of recoil-alpha, recoil-alpha-gamma analysis and excitation functions measurements. Two alpha-decaying isomeric states in sup 1 sup 8 sup 4 Bi with half-life values of 13(2) ms and 6.6(1.5) ms were identified. The alpha-branching ratio of sup 1 sup 8 sup 0 Tl was deduced for the first time as b subalpha = (2-12)%. Improved data on the fine-structure alpha-decay of sup 1 sup 8 sup 6 Bi were obtained in the sup 9 sup 3 Nb( sup 9 sup 5 Mo, 2n) sup 1 sup 8 sup 6 Bi reaction. A similarity of the decay energies and half-life values of sup 1 sup 8 sup 4 sup , sup 1 sup 8 sup 6 Bi is pointed out and a possible explanation for this effect is suggested.

Laser soldering of Sn-Ag-Cu and Sn-Zn-Bi lead-free solder pastes

Science.gov (United States)

Takahashi, Junichi; Nakahara, Sumio; Hisada, Shigeyoshi; Fujita, Takeyoshi

2004-10-01

It has reported that a waste of an electronics substrate including lead and its compound such as 63Sn-37Pb has polluted the environment with acid rain. For that environment problem the development of lead-free solder alloys has been promoted in order to find out the substitute for Sn-Pb solders in the United States, Europe, and Japan. In a present electronics industry, typical alloys have narrowed down to Sn-Ag-Cu and Sn-Zn lead-free solder. In this study, solderability of Pb-free solder that are Sn-Ag-Cu and Sn-Zn-Bi alloy was studied on soldering using YAG (yttrium aluminum garnet) laser and diode laser. Experiments were peformed in order to determine the range of soldering parameters for obtaining an appropriate wettability based on a visual inspection. Joining strength of surface mounting chip components soldered on PCB (printed circuit board) was tested on application thickness of solder paste (0.2, 0.3, and 0.4 mm). In addition, joining strength characteristics of eutectic Sn-Pb alloy and under different power density were examined. As a result, solderability of Sn-Ag-Cu (Pb-free) solder paste are equivalent to that of coventional Sn-Pb solder paste, and are superior to that of Sn-Zn-Bi solder paste in the laser soldering method.

Properties and Microstructures of Sn-Bi-X Lead-Free Solders

Directory of Open Access Journals (Sweden)

Fan Yang

2016-01-01

Full Text Available The Sn-Bi base lead-free solders are proposed as one of the most popular alloys due to the low melting temperature (eutectic point: 139°C and low cost. However, they are not widely used because of the lower wettability, fatigue resistance, and elongation compared to traditional Sn-Pb solders. So the alloying is considered as an effective way to improve the properties of Sn-Bi solders with the addition of elements (Al, Cu, Zn, Ga, Ag, In, Sb, and rare earth and nanoparticles. In this paper, the development of Sn-Bi lead-free solders bearing elements and nanoparticles was reviewed. The variation of wettability, melting characteristic, electromigration, mechanical properties, microstructures, intermetallic compounds reaction, and creep behaviors was analyzed systematically, which can provide a reference for investigation of Sn-Bi base solders.

Mineralogy, fluid inclusion petrography, and stable isotope geochemistry of Pb-Zn-Ag veins at the Shizhuyuan deposit, Hunan Province, southeastern China

Science.gov (United States)

Wu, Shenghua; Mao, Jingwen; Yuan, Shunda; Dai, Pan; Wang, Xudong

2018-01-01

The Shizhuyuan polymetallic deposit is located in the central part of the Nanling region, southeastern China, and consists of proximal W-Sn-Mo-Bi skarns and greisens and distal Pb-Zn-Ag veins. The sulfides and sulfosalts in the distal veins formed in three distinct stages: (1) an early stage of pyrite and arsenopyrite, (2) a middle stage of sphalerite and chalcopyrite, and (3) a late stage of galena, Ag-, Sn-, and Bi-bearing sulfides and sulfosalts, and pyrrhotite. Combined sulfide and sulfosalt geothermometry and fluid inclusion analyses indicate that the early stage of mineralization occurred at a temperature of 400 °C and involved boiling under hydrostatic pressure ( 200 bar), with the temperature of the system dropping during the late stage to 200 °C. Laser Raman analysis indicates that the fluid inclusions within the studied minerals are dominated by H2O, although some contain carbonate solids and CH4 gas. Vein-hosted sulfides have δ34S values of 3.8-6.3‰ that are interpreted as indicative of a magmatic source of sulfur. The mineralization process can be summarized as follows: an aqueous fluid exsolved on final crystallization of the Qianlishan pluton, ascended along fracture zones, cooled to <400 °C, and boiled under hydrostatic conditions, and with decreasing temperature and sulfur fugacity, sulfide and sulfosalt minerals precipitated successively from the Ag-Cu-Zn-Fe-Pb-Sb-As-S-bearing fluid system.

Electronic tuning of the transport properties of off-stoichiometric Pb{sub x}Sn{sub 1−x}Te thermoelectric alloys by Bi{sub 2}Te{sub 3} doping

Energy Technology Data Exchange (ETDEWEB)

Guttmann, Gilad M. [The Unit of Energy Engineering, Ben-Gurion University of the Negev, Beer-Sheva (Israel); Dadon, David [Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva (Israel); Gelbstein, Yaniv [The Unit of Energy Engineering, Ben-Gurion University of the Negev, Beer-Sheva (Israel); Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva (Israel)

2015-08-14

The recent energy demands affected by the dilution of conventional energy resources and the growing awareness of environmental considerations had motivated many researchers to seek for novel renewable energy conversion methods. Thermoelectric direct conversion of thermal into electrical energies is such a method, in which common compositions include IV-VI semiconducting compounds (e.g., PbTe and SnTe) and their alloys. For approaching practical thermoelectric devices, the current research is focused on electronic optimization of off-stoichiometric p-type Pb{sub x}Sn{sub 1−x}Te alloys by tuning of Bi{sub 2}Te{sub 3} doping and/or SnTe alloying levels, while avoiding the less mechanically favorable Na dopant. It was shown that upon such doping/alloying, higher ZTs, compared to those of previously reported undoped Pb{sub 0.5}Sn{sub 0.5}Te alloy, were obtained at temperatures lower than 210–340 °C, depending of the exact doping/alloying level. It was demonstrated that upon optimal grading of the carrier concentration, a maximal thermoelectric efficiency enhancement of ∼38%, compared to that of an undoped material, is expected.

Production and radiochemical separation of 203Pb radioisotope for nuclear medicine

International Nuclear Information System (INIS)

Szuecs, Z.; Takacs, S.; Andrasi, D.; Kovacs, B.

2012-01-01

Complete text of publication follows. The heavy metal pollution due to their industrial production, waste repository or accident as the cyanide spill in river Tisza in 2002, increase the scientific interest for using an ideal trace isotope for monitoring these type of events. The lead is one of the most toxic and commonly used heavy metal, its poisoning is often deadly because very difficult to recognize and identify. The neuro-scientific study of biodegradation effect of lead could be an impressive scientific field of application of 203 Pb radioisotope. However the targeted radionuclide therapy especially the α-emitting radioisotope therapy is also strongly interested to find an ideal tracer for the 213 Bi and 212 Pb therapy. Therefore the 203 Pb is a potential radioisotope for this role due to its radiation behaviour and as heavy metal element. The 203 Tl(p,n) 203 Pb nuclear reaction was chosen for the production. The irradiation was done at the compact cyclotron of Atomki with proton beam 14.5 MeV energy and beam current of 7 μAs. The thickness of the target material was 840 μm, the irradiation time was 3 hours and the produced activity was 40 MBq at EOB. It corresponds to 1.87 MBq/μAh physical yield of the reaction which correlating with the cross section curve. A new technique was developed for target preparation. The metal Tl was pressed into a copper backing and covered with a HAWAR foil with thickness of 11 μm. The covering foil saved the surface of the Tl from the oxidation and also transferred the dissipating heat to the cooling He gas. The back side of the target was cooled with pressured cold water. The irradiated Tl target was pressed out from the copper backing, which had only the thickness of 0.2 mm. Then the Thallium was dissolved in nitric acid. The excess acid was evaporated slowly. The nitrate form was transferred to chloride form by 8 mol/dm 3 HCl and the Thallium was kept in 3+ oxidation stage by hydrogen peroxide. The separation was

Effect of Bi doping on morphotropic phase boundary and dielectric properties of PZT

Energy Technology Data Exchange (ETDEWEB)

Joshi, Shraddha; Acharya, Smita, E-mail: saha275@yahoo.com [Advanced Materials Research Laboratory, Department of Physics, Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur-440033, M.S. India (India)

2016-05-23

In our present attempt, Pb{sub (1-x)}Bi{sub x}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} [PBZT] {where x = 0, 0.05, 0.1} is synthesized by sol-gel route. Effect of Bi addition on structure, sinterability and dielectric properties are observed. The presence of morphotropic phase boundary (coexistence of tetragonal and rhombohedral symmetry) is confirmed by X-ray diffraction. Enhancement of sinterability after Bi doping is observed through a systematic sintering program. Frequency and temperature dependent dielectric constant are studied. Bi doping in PZT is found to enhance room temperature dielectric constant. However, at high temperature the dielectric constant of pure PZT is more than that of doped PZT.

Impedance and modulus spectroscopy characterization of Tb modified Bi{sub 0.8}A{sub 0.1}Pb{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} ceramics

Energy Technology Data Exchange (ETDEWEB)

Thakur, Shweta; Rai, Radheshyam, E-mail: rshyam1273@gmail.com [School of Physics, Shoolini University, Himachal Pradesh (India); Bdikin, Igor [Centre for Mechanical Technology and Automation (TEMA), University of Aveiro (Portugal); Valente, Manuel Almeida [Departamento de Fisica, Universidade de Aveiro (Portugal)

2016-01-15

In this paper we present the impedance spectroscopy of ternary solid solutions of BiFeO{sub 3} , TbFeO{sub 3} and PbTiO{sub 3} , prepared by solid-state reaction method. The preliminary structural studies were carried out by X-ray diffraction technique, showing the formation of polycrystalline sample with ABO{sub 3} type of perovskite structure with hexagonal symmetry for Bi{sub 0.8}Tb{sub 0.1}Pb{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} system at room temperature. Dielectric and impedance study of this ceramic has been characterized in the temperature range 175 - 325 deg C and frequency range 100 Hz - 1 MHz. The maximum ferroelectric transition temperature (T{sub c} ) of this system was in the range 210 - 225 deg C with the dielectric constant having maximum value ∼ 2480 at 1 kHz. The complex impedance graph exhibited one impedance semicircle arc at all reported temperatures, which indicates that the impedance response is a Cole-Cole type relaxation. Single semicircle indicate that the grain effect of the bulk in ceramic. The bulk resistance of the material decreases with increasing temperature showing negative temperature showing a typical semiconducting property, i.e. negative temperature coefficient of resistance (NTCR) behavior. (author)

Radon and progeny (214Pb and 214Bi) in urban water-supply systems of Sao Paulo State, Brazil

International Nuclear Information System (INIS)

Bonotto, Daniel Marcos; Padron-Armada, Priscilla Cardoso

2008-01-01

Many water-supply systems in South America utilize the waters of the Guarani aquifer at least as part of their networks. However, there is little present knowledge in Brazil of the factors affecting Rn presence in the water supplied for end-users, despite the economic importance of Guarani aquifer. 222 Rn analyzes of 162 water samples were performed at 8 municipalities in Sao Paulo State, Brazil, with the aim of investigating the major factors affecting its presence in solution. The 222 Rn activity concentration ranged from 0.04 up to 204.9 Bq/L, with three samples exceeding the World Health Organization maximum limit of 100 Bq/L. Aeration was confirmed as the most important factor for Rn release, as expected due to its gaseous nature. Accumulation in pipes and stratification in the water column were other significant factors explaining the data obtained in some circumstances. The Rn daughters 214 Pb and 214 Bi were also determined in a set of selected samples and their presence was directly related to the occurrence of Rn dissolved in water

Mechanical properties of Bi,Pb(2223) single filaments and I sub c (epsilon) behaviour in longitudinally strained tapes

CERN Document Server

Passerini, R; Seeber, B; Flükiger, R

2002-01-01

The Young's modulus and fracture stress of isolated Bi,Pb(2223) filaments were deduced from three-point bending tests performed at different stages of the tapes preparation. These results were introduced in the model describing the evolution of critical current of tapes submitted to a longitudinal strain in view to predict their irreversible strain limit epsilon sub i sub r sub r. These calculated irreversible strain limits were compared to measured values, taken from a set of tapes made with different filling factors and composite matrices. This experiment shows that the predicted irreversible strain limits correspond to the measured ones. Presenting the I sub c behaviour of highly stressed tapes in a magnetic field, we discuss the evolution of the ratio I sup s sup t sup r sup o sup n sup g sub c sub 0 /I sub c sub 0 versus strain. This value, representative of the fraction of the critical current attributed to strongly connected grains, increases significantly during the crack formation regime at epsilon >...

Growth of large PbTiO[sub 3] crystals by a self-flux technique

Energy Technology Data Exchange (ETDEWEB)

Sun, B.N. (Dept. of Materials Science and Engineering, Materials Research Lab., and Beckman Inst., Univ. of Illinois, Urbana-Champaign (United States)); Huang, Y. (Dept. of Materials Science and Engineering, Materials Research Lab., and Beckman Inst., Univ. of Illinois, Urbana-Champaign (United States)); Payne, D.A. (Dept. of Materials Science and Engineering, Materials Research Lab., and Beckman Inst., Univ. of Illinois, Urbana-Champaign (United States))

1993-03-01

Pure lead titanate (PbTiO[sub 3]) crystals (5x5x5 mm[sup 3]) were grown from high-temperature solutions by a slow cooling technique using PbO as a self-flux. The optimum growth conditions were determined to be: (1) (1-x) TiO[sub 2]+x PbO with x (in mol%) varying from 0.78 to 0.82 for the starting compositions, (2) 930-1050 C as the growth temperature range and (3) 0.4-1.5 C/h as the cooling rates. Evaporation of PbO was significantly reduced by use of a double-crucible technique. The grown crystals were characterized by X-ray diffraction, chemical analysis and optical microscopy. The transformation temperatures (onset) of 492.5 C (on heating) and 491.3 C (on cooling) were determined by differential scanning calorimetry. The transformation process had a thermal hysteresis of 1.2 C from onset data. (orig.)

Performance Evaluation of Photovoltaic Solar System with Different Cooling Methods and a Bi-Reflector PV System (BRPVS: An Experimental Study and Comparative Analysis

Directory of Open Access Journals (Sweden)

Muhammad Adil Khan

2017-06-01

Full Text Available Reducing the price of solar photovoltaic (PV systems has been a constant challenge. Despite recent advances, solar PV systems are still more costly than conventional energy resources. For the first time, this study examines the effectiveness of three different structures/materials: (i silvered glass plane mirror; (ii convex spherical mirrors; and (iii aluminum (Al foil as reflector. Comparative analysis of four different cooling techniques, i.e., water sprinkling system, passive heat sink method, active air fan method, and closed loop method, for enhancement of output power was performed. A novel Bi reflector solar PV system (BRPVS was suggested to control the working of the reflectors. The Al foil enhanced the power output compared to the others. In addition, the effect of using a reflector on the temperature of a solar PV system was studied. High operating temperatures resulted in a decrease in the maximum output power under the same solar radiation conditions. The combined enhancement of the output power by both Al foil BRPVS system and cooling system was almost 22.75–38.55%. An optimal control algorithm to use cooling and BRPVS in an efficient manner is described.

Film cooling for a closed loop cooled airfoil

Science.gov (United States)

Burdgick, Steven Sebastian; Yu, Yufeng Phillip; Itzel, Gary Michael

2003-01-01

Turbine stator vane segments have radially inner and outer walls with vanes extending therebetween. The inner and outer walls are compartmentalized and have impingement plates. Steam flowing into the outer wall plenum passes through the impingement plate for impingement cooling of the outer wall upper surface. The spent impingement steam flows into cavities of the vane having inserts for impingement cooling the walls of the vane. The steam passes into the inner wall and through the impingement plate for impingement cooling of the inner wall surface and for return through return cavities having inserts for impingement cooling of the vane surfaces. At least one film cooling hole is defined through a wall of at least one of the cavities for flow communication between an interior of the cavity and an exterior of the vane. The film cooling hole(s) are defined adjacent a potential low LCF life region, so that cooling medium that bleeds out through the film cooling hole(s) reduces a thermal gradient in a vicinity thereof, thereby the increase the LCF life of that region.

Temperature dependence of the hole density in high-T{sub C} superconductors Bi{sub 2−y}Pb{sub y}Sr{sub 2}CaCu{sub 2}O{sub 8+δ}

Energy Technology Data Exchange (ETDEWEB)

Ghafari, A. [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany); Janowitz, C., E-mail: janowitz@physik.hu-berlin.de [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany); Ariffin, A.K. [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany); Dep. of Physics, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim (Malaysia); Dwelk, H.; Krapf, A.; Manzke, R. [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany)

2013-02-14

Highlights: ► We have done x-ray absorption spectra on the CuL{sub 3} edge of Bi(Pb)-2212 cuprates. ► We have measured the hole density n{sub H} in the CuO{sub 2} plane of Bi(Pb)-2212 cuprates. ► The measurements were performed from 10 K to 300 K. ► Gor’kov and Teitel’baums formula of n{sub H} consists of a linear and an exponential term. ► We have extended the Gor’kov and Teitel baum formula by a T{sup 3/2} term. -- Abstract: One of the most puzzling anomalies of high-T{sub C} cuprates is the strong temperature dependence of the Hall coefficient (R{sub H}) and the hole density (n{sub H}). Gor’kov and Teitel’baum (GT) proposed by using experimental data of La{sub 2−x}Sr{sub x}CuO{sub 4} (LSCO) a two fluid model. The number of holes per Cu atom n{sub H}, changes with temperature according to n{sub H}(T,x) = n{sub 0}(x) + n{sub 1}(x)exp(−Δ(x)/T) [1]. To clarify the temperature dependence of n{sub H} we have determined n{sub H} from X-ray absorption spectra (XAS) at the CuL{sub 3} edge for nearly optimum and slightly underdoped Bi{sub 2−y}Pb{sub y}Sr{sub 2}CaCu{sub 2}O{sub 8+δ} single crystals yielding directly the absolute value of n{sub H} in the CuO{sub 2} planes and also its change with temperature n{sub H}(T). It shows pronounced structures between 10 K and 300 K. The temperature dependence puts constraints to the applicability of previously developed models: (i) the two-band model without any explicit temperature dependence and (ii) the formula of GT, because the latter is not able to fit our data over the whole temperature range from 10 K to 300 K. Instead the thermal behavior of n{sub H} proposes a function with at least three terms, i.e. a third term added to the formula of GT is of exponential form ∼T{sup 3/2}.

Mechanical properties of Bi-In-Zn/ Cu solder joint system

International Nuclear Information System (INIS)

Ervina Efzan Mohd Noor; Mohammed Noori Ridha; Ahmad Badri Ismail; Nurulakmal Mohd Sharif; Kuan Yew Cheong; Tadashi Ariga; Zuhailawati Hussain

2009-01-01

Full text: In recent years, the pollution of environment from lead (Pb) and Pb-containing compounds in microelectronic devices attracts more and more attentions in academia and industry; the lead-free solder alloys begin to replace the lead-based solders in packaging process of some devices and components. In this works, microstructure and mechanical properties of different reflow temperature (80, 100, 120 and 140 degree Celsius) for solder joints on shear strength of Bi-In-Zn lead free solder with low melting temperature of 60 degree Celsius on Cu solder joint has been investigated. This paper will compared the mechanical properties of the Bi-In-Zn lead-free solder alloys with current lead-free solder, Sn-Ag-Cu solder alloy. The fracture surface analyses have been observed by Optical Microscope and were investigated by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray (EDX) and proved it by X-ray diffraction (XRD). (author)

Advanced Small-Safe Long-Life Lead Cooled Reactor Cores for Future Nuclear Energy

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Hyeong; Hong, Ser Gi [Kyung Hee University, Seoul (Korea, Republic of)

2014-10-15

One of the reasons for use of the lead or lead-bismuth alloy coolants is the high boiling temperature that avoids the possibility of coolant voiding. Also, these coolants are compatible with air, steam, and water. Therefore, intermediate coolant loop is not required as in the sodium cooled reactors 3. Lead is considered to be more attractive coolant than lead-bismuth alloy because of its higher availability, lower price, and much lower amount of polonium activity by factor of 104 relatively to lead. On the other hand, lead has higher melting temperature of 601K than that of lead-bismuth (398K), which narrows the operating temperature range and also leads to the possibility of freezing and blockage in fresh cores. Neutronically, the lead and lead-bismuth have very similar characteristics to each other. The lead-alloy coolants have lower moderating power and higher scattering without increasing moderation for neutrons below 0.5MeV, which reduces the leakage of the neutrons through the core and provides an excellent reflecting capability for neutrons. Due to the above features of lead or lead-alloy coolants, there have been lots of studies on the small lead cooled core designs. In this paper, small-safe long-life lead cooled reactor cores having high discharge burnup are designed and neutronically analyzed.. The cores considered in this work rates 110MWt (36.7MWe). In this work, the long-life with high discharge burnup was achieved by using thorium or depleted uranium blanket loaded in the central region of the core. Also, we considered a reference core having no blanket for the comparison. This paper provides the detailed neutronic analyses for these small long-life cores and the detailed analyses of the reactivity coefficients and the composition changes in blankets. The results of the core design and analyses show that our small long-life cores can be operated without refueling over their long-lives longer than 45EFPYs (Effective Full Power Year). In this work

Fundamentals for the development of a low-activation lead coolant with isotopic enrichment for advanced nuclear power facilities

International Nuclear Information System (INIS)

Khorasanov, G.L.; Blokhin, A.I.

2002-01-01

The purpose of this paper is to study the prospects of new coolants for fast reactors and accelerator driven systems. The main focus is on their improvement using the isotopic tailoring technique to reduce post-irradiation activity. Calculations using the FISPACT-3 code show that irradiating natural lead (Pb-nat) for 30 years leads to the accumulation of long-lived toxic radionuclides, 207 Bi, 208 Bi and 210 Pb, which extends the cooling down period to the clearance level. This time can be shortened by using the lead isotope 206 Pb instead of Pb-nat. This substantially decreases the concentration of the most toxic polonium isotope, 210 Po. Calculations for lead activation in the hard proton-neutron ADS spectrum were performed using the CASCADE/SNT code. The time-dependent activity of the 207 Bi produced in Pb-nat and 206 Pb after irradiation for one year with a proton beam having an energy of 0.8 GeV and a current of 30 mA is given. The activity of 207 Bi is decreased by four orders of magnitude when 206 Pb is used instead of natural lead as a coolant for ADS targets. The production of such radiotoxic nuclides as 210 Po is also substantially diminished. (author)

Generation IV concepts - Presentation at ACRS workshop 'Regulatory challenges for future nuclear power plants'

International Nuclear Information System (INIS)

Versluis, Rob M.

2001-01-01

The concept of the Near-Term Deployment Working Group was to define a technical approach for Generation IV system with enough detail to allow evaluation against the goal, bur broad enough to allow for optional features and trade. The following concepts were taken into account: water coolant (water or heavy water), gas coolant, liquid metal coolants. Concepts were grouped according to concept sets of technology base share and design approach. Water coolant concepts were grouped as follows: PWR loop reactors, integral primary system PWRs, Integral BWRs, pressure tube reactors, high conversion cores, supercritical water reactors, advanced fuel cycle concepts. Gas coolant concepts were grouped as follows: pebble bed modular reactors; prismatic modular reactors, very high temperature reactors, fast spectrum reactors, others (fluidized bed, moving ignition zone concept). Liquid metal concepts were grouped in four major categories: Medium-to-large oxide-fueled systems; Medium-sized metal-fueled systems; Medium-sized Pb/Pb-Bi systems; Small-sized Pb/Pb-Bi systems. The three supporting technology areas were examined: Fuels (oxide, metal, nitride); Coolants (Na, Pb/Pb-Bi); Fuel Cycle (advanced aqueous, pyroprocess). Non-classical concepts were also grouped as follows: Eutectic metallic fuel; Molten salt fuel; Gas core reactor; Molten salt cooled/solid fuel; Organic cooled reactor; Solid conduction/heat pipe; Fission product direct energy conversion. The Technical working Groups are analyzing the candidate concepts for performance potential relative to the goals; and technology gaps

Does it matter which Life Cycle Assessment (LCA) tool you choose? - a comparative assessment of SimaPro and GaBi

DEFF Research Database (Denmark)

Herrmann, Ivan Tengbjerg; Moltesen, Andreas

2015-01-01

SimaPro and GaBi are the leading software tools used for life cycle assessments. Assessing product systems applying the exact same unit process foundation would be expected to yield comparable result sets with either tool. The software performances are compared based on a random sample of 100 unit...... of these differences are so large that they could influence the conclusions. For some of the 100 unit processes, six elementary flows were inventoried differently in SimaPro and GaBi, with an extreme maximum comparative ratio of 109. The implementation of the impact assessment methodologies shows notable differences...... processes. The research question investigated here is; can there be a difference between SimaPro and GaBi influencing the results and the decisions based on them? In many cases the results are identical between SimaPro and GaBi or nearly so, but in other cases the results reveal differences. Some...

Analysis of {sup 210}Pb in water samples with plastic scintillation resins

Energy Technology Data Exchange (ETDEWEB)

Lluch, E.; Barrera, J. [Department of Analytical Chemistry, University of Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain); Tarancón, A., E-mail: alex.tarancon@ub.edu [Department of Analytical Chemistry, University of Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain); Bagán, H. [Department of Pure and Applied Biochemistry, Lund University, Getingevägen 60, Hus II, 22100 SE, Lund (Sweden); García, J.F. [Department of Analytical Chemistry, University of Barcelona, Martí i Franqués, 1-11, E-08028, Barcelona (Spain)

2016-10-12

{sup 210}Pb is a radioactive lead isotope present in the environment as member of the {sup 238}U decay chain. Since it is a relatively long-lived radionuclide (T{sub 1/2} = 22.2 years), its analysis is of interest in radiation protection and the geochronology of sediments and artwork. Here, we present a method for analysing {sup 210}Pb using plastic scintillation resins (PSresins) packaged in solid-phase extraction columns (SPE cartridge). The advantages of this method are its selectivity, the low limit of detection, as well as reductions in the amount of time and reagents required for analysis and the quantity of waste generated. The PSresins used in this study were composed of a selective extractant (4′,4″(5″)-Di-tert-butyldicyclohexano-18-crown-6 in 1-octanol) covering the surface of plastic scintillation microspheres. Once the amount of extractant (1:1/4) and medium of separation (2 M HNO{sub 3}) were optimised, PSresins in SPE cartridges were calibrated with a standard solution of {sup 210}Pb. {sup 210}Pb could be fully separated from its daughters, {sup 210}Bi and {sup 210}Po, with a recovery value of 91(3)% and detection efficiency of 44(3)%. Three spiked water samples (one underground and two river water samples) were analysed in triplicates with deviations lower than 10%, demonstrating the validity of the PS resin method for {sup 210}Pb analysis. - Highlights: • A plastic scintillation resin for selective analysis of {sup 210}Pb has been developed. • A commercial SPE cartridge has been use for separation and scintillation counting. • {sup 210}Pb separation from {sup 210}Bi and {sup 210}Po is achieved with a 91(3)% of recovery. • The method is valid for analysis of {sup 210}Pb in river water samples.

Ferroelectric properties of bilayer structured Pb(Zr0.52Ti0.48)O3/SrBi2Ta2O9 (PZT/SBT) thin films on Pt/TiO2/SiO2/Si substrates

International Nuclear Information System (INIS)

Zhang Wenqi; Li Aidong; Shao Qiyue; Xia Yidong; Wu Di; Liu Zhiguo; Ming Naiben

2008-01-01

Pb(Zr 0.52 Ti 0.48 )O 3 (PZT) thin films with large remanent polarization and SrBi 2 Ta 2 O 9 (SBT) thin films with excellent fatigue-resisting characteristic have been widely studied for non-volatile random access memories, respectively. To combine these two advantages , bilayered Pb(Zr 0.52 Ti 0.48 )O 3 /SrBi 2 Ta 2 O 9 (PZT/SBT) thin films were fabricated on Pt/TiO 2 /SiO 2 /Si substrates by chemical solution deposition method. X-ray diffraction patterns revealed that the diffraction peaks of PZT/SBT thin films were completely composed of PZT and SBT, and no other secondary phase was observed. The electrical properties of the bilayered structure PZT/SBT films have been investigated in comparison with pure PZT and SBT films. PZT/SBT bilayered thin films showed larger remanent polarization (2P r ) of 18.37 μC/cm 2 than pure SBT and less polarization fatigue up to 1 x 10 9 switching cycles than pure PZT. These results indicated that this bilayered structure of PZT/SBT is a promising material combination for ferroelectric memory applications

The matrix effect study in the spectrographic analysis of rare earth elements. Pt. 1. The influence of Sn, Pb, Sb, Bi, Cu, Ag, Zn and Cd on the spectral lines intensity of Y, La, Ce, Pr, Nd and Sm in the current arc exciting between C-electrodes

International Nuclear Information System (INIS)

Wysocka-Lisek, J.; Paszkowska, B.; Mularczyk, K.

1976-01-01

In the beginning the influence of Sn, Pb, Sb, Bi, Cu, Ag, Zn and Cd on the light rare earth spectral lines using Ni as the internal standard, during the intermittent current arc excitation between C-electrodes was studied. On the basis of the spectral lines intensity measurements, it was stated that one may apply the addition of Ni as the internal standard by the quantitative determination of Sn, Pb, Sb, Bi, Zn and Cd in the light rare earth mixtures with one of the above. Also a great influence of the presence of the individually studied metal was observed on the spectral line intensity of rare earth elements and nickel. The differences of the thermo-chemical reactions nature between excited elements and the carbon of the electrodes may cause that influence. (author)

The effect of sintering temperature on the intergranular properties and weak link behavior of Bi2223 superconductors

Directory of Open Access Journals (Sweden)

P. Kameli

2006-03-01

Full Text Available  A systematic study of the intergranular properties of (Bi,Pb2 Sr2 Ca2 Cu3 Oy (Bi2223 polycrystalline samples has been done using the electrical resistivity and AC susceptibility techniques. In this study, we have prepared a series of Bi2223 samples with different sintering temperatures. The XRD results show that by increasing the sintering temperature up to 865° c , the Bi2212 phase fraction decreases. It was found that the Bi2212 phase on the grain boundaries is likely to play the role of the weak links and consequently reduces the intergranular critical current densities.

Application of extended-crystal diffraction techniques to the symmetry and structure analysis of 221-PbBiSrCaCuO

International Nuclear Information System (INIS)

Goodman, P.; Miller, P.

1993-01-01

The discovery of a series of layer-perovskite superconducting compounds by Maeda et al. (1988) presented a challenge for present day electron diffraction techniques, due to their common occurrence as mixed phases, and the existence of complex structural modulations of more than one type. Cowley's (1976) theory developed specifically for describing diffraction effects from layered crystals having a micro-domainal sub-structure seems particularly well suited to the task of solving these structures, while the technique of extended-crystal diffraction is shown here to be capable of providing data of sufficient precision for this analysis. The present study is made on the 221 compound of PbBiSrCaCuO. Using the above diffraction techniques it is shown that the true symmetry of the whole structure is orthorhombic, Amaa, and not monoclinic as previously assumed, and that the superlattice reflections arise as a result of a basic microdomainal constitution, rather than from a uniform and incommensurate modulation. 8 figs

Charge retention characteristics of (Bi,La)4Ti3O12 capacitors : comparison with Pb(Zr,Ti)O3 capacitors

International Nuclear Information System (INIS)

Yoon, J. G.; Kim, D. J.; So, Y. W.

2005-01-01

We investigated the retention characteristics of (Bi,La) 4 Ti 3 O 12 (BLT) capacitors with Pt electrodes and compared them with Pb(Zr,Ti)O 3 (PZT) capacitors in the same- and opposite-state retentions. Polarization relaxations in short-time regime (t < 100 s) were well described by a power-law decay function, but the polarization relaxation of BLT was more significant than that of PZT. We discuss the difference in the relaxation process of polarization in conjunction with film microstructures and magnitudes of polarization for BLT and PZT. In long-time opposite-state retention, BLT capacitors showed much better characteristics than PZT. For both BLT and PZT, the opposite-state retention loss was governed by the development of an internal field during retention. For BLT capacitors, internal field development was much weaker than for PZT after retention, resulting in a good opposite-state retention. Structural and electrical properties are discussed in conjunction with the retention characteristics of the materials.

Thermal cycling properties of a lead-free positive temperature coefficient thermistor in the Ba0.97(Bi0.5Na0.5)0.03TiO3 system

Science.gov (United States)

Choi, Hyoung-Seuk; Choi, Soon-Mok; Choi, Duck-Kyun

2016-01-01

A Pb-free PTC (positive temperature coefficient thermistor) heater was developed in the Ba0.97(Bi0.5Na0.5)0.03TiO3 system especially for automotive part applications. The reliability was verified by using a thermal cycling test designed on the basis of the result from a quality function deployment (QFD) analysis. We compared the thermal cycling test results from the newly-developed Pb-free PTC heaters with the results from PTC heaters currently on the market, namely, PTC heaters containing Pb. Life prediction and stress-strength relationships were analyzed together with a thermal diffusivity evaluation. We discuss the potential failure mechanisms during the thermal cycling test, focusing on the fact that electrical degradation in PTC materials is closely related to mechanical degradation due to the internal stress in the materials that comes from repeated phase changes. Different grain size distributions on the sintered bulks were considered to a key factor for explaining the different results of the reliability tests between the new Pb-free PTC heaters developed in this study and the commercial PTC heaters containing Pb.

Validation of 226Ra, 228Ra and 210Pb measurements in soil and sediment samples through high resolution gamma ray spectrometry

International Nuclear Information System (INIS)

Dias, Danila Carrijo da Silva; Silva, Nivaldo Carlos da; Bonifacio, Rodrigo Leandro; Guerrero, Eder Tadeu Zenun

2013-01-01

Radionuclides found in ore extraction waste materials are a great source of concern regarding public health and environmental safety. One technique to determine the concentration of substances is high resolution gamma ray spectrometry using HPGe. Validating a measurement technique is essential to warrant high levels of quality to any scientific work. The Laboratory of Pocos de Caldas of the Brazilian Commission for Nuclear Energy partakes into a Quality Management System project, seeking Accreditation under ISO/IEC 17025 through the validation of techniques of chemical and radiometric analysis of environmental samples from water, soil and sediment. The focus of the Radon Laboratory at LAPOC is validation of Ra-226, Ra-228 and Pb-210 concentration determinations in soil and sediment through a gamma spectrometer system. The stages of this validation process included sample reception and preparation, detector calibration and sample analyses. Dried samples were sealed in metallic containers and analyzed after radioactive equilibrium between Ra-226 and daughters Pb-214 and Bi-214. Gamma spectrometry was performed using CANBERRA HPGe detector and gamma spectrum software Genie 2000. The photo peaks used for Ra-226 determination were 609 keV and 1020 keV of Bi-214 and 351 keV of Pb-214. For the Ra-228 determination a photopeak of 911 keV was used from its short half-life daughter Ac-228 (T1/2 = 6.12 h). For Pb-210, the photopeak of 46.5 keV was used, which, due to the low energy, self-absorption correction was needed. Parameters such as precision, bias/accuracy, linearity, detection limit and uncertainty were evaluated for that purpose. The results have pointed to satisfying results. (author)

Slow hot carrier cooling in cesium lead iodide perovskites

Science.gov (United States)

Shen, Qing; Ripolles, Teresa S.; Even, Jacky; Ogomi, Yuhei; Nishinaka, Koji; Izuishi, Takuya; Nakazawa, Naoki; Zhang, Yaohong; Ding, Chao; Liu, Feng; Toyoda, Taro; Yoshino, Kenji; Minemoto, Takashi; Katayama, Kenji; Hayase, Shuzi

2017-10-01

Lead halide perovskites are attracting a great deal of interest for optoelectronic applications such as solar cells, LEDs, and lasers because of their unique properties. In solar cells, heat dissipation by hot carriers results in a major energy loss channel responsible for the Shockley-Queisser efficiency limit. Hot carrier solar cells offer the possibility to overcome this limit and achieve energy conversion efficiency as high as 66% by extracting hot carriers. Therefore, fundamental studies on hot carrier relaxation dynamics in lead halide perovskites are important. Here, we elucidated the hot carrier cooling dynamics in all-inorganic cesium lead iodide (CsPbI3) perovskite using transient absorption spectroscopy. We observe that the hot carrier cooling rate in CsPbI3 decreases as the fluence of the pump light increases and the cooling is as slow as a few 10 ps when the photoexcited carrier density is 7 × 1018 cm-3, which is attributed to phonon bottleneck for high photoexcited carrier densities. Our findings suggest that CsPbI3 has a potential for hot carrier solar cell applications.

Direct observation of interlayer Josephson vortices in heavily Pb-doped Bi2Sr2CaCu2Oy by scanning superconducting quantum interference device microscopy

International Nuclear Information System (INIS)

Kasai, Junpei; Hasegawa, Tetsuya; Okazaki, Noriaki; Koinuma, Hideomi; Nakayama, Yuri; Shimoyama, Jun-ichi; Kishio, Kohji; Motohashi, Teruki; Matsumoto, Yuji

2006-01-01

Josephson vortices trapped in cross-sectional edge surfaces of Pb 0.6 Bi 1.4 Sr 2 CaCu 2 O y has been directly observed by using a scanning superconducting quantum interference device (SQUID) microscope. The magnetic field distribution B z around each vortex is substantially anisotropic, compared with the usual vortex in the ab-plane, and is extended over 100 μm toward the in-plane direction. By fitting a theoretical B z function to experimental ones, c-axis penetration depth λ c was estimated to be 11.2 ±0.7 μm, which is in good agreement with the literature value, 12.6 μm, obtained from the Josephson plasma edge frequency. (author)

[Possibilities of bi-level positive pressure ventilation in chronic hypoventilation].

Science.gov (United States)

Saaresranta, Tarja; Anttalainen, Ulla; Polo, Olli

2011-01-01

During the last decade, noninvasive bi-level positive pressure ventilation has enabled respiratory support in inpatient wards and at home. In many cases, a bi-level airway pressure ventilator can be used to avoid artificial airway and respirator therapy, and may shorten hospital stay and save costs. The treatment alleviates the patient's dyspnea and fatigue, whereby the quality of life improves, and in certain situations also the life span increases. The implementation of bi-level positive pressure ventilation by the physician requires knowledge of the basics of respiratory physiology and familiarization with the bi-level airway pressure ventilator.

Limitations of Cs3Bi2I9 as lead-free photovoltaic absorber materials.

Science.gov (United States)

Ghosh, Biplab; Wu, Bo; Mulmudi, Hemant Kumar; Guet, Claude; Weber, Klaus; Sum, Tze Chien; Mhaisalkar, Subodh G; Mathews, Nripan

2018-01-17

Lead (Pb) halide perovskites have attracted tremendous attention in recent years due to their rich optoelectronic properties, which have resulted in more than 22% power conversion efficient photovoltaics. Nevertheless, Pb-metal toxicity remains a huge hurdle for extensive applications of these compounds. Thus, alternative compounds with similar optoelectronic properties need to be developed. Bismuth possesses similar electronic structure as that of lead with the presence of ns2 electrons that exhibit rich structural variety as well as interesting optical and electronic properties. Herein, we critically assess Cs3Bi2I9 as a candidate for thin-film solar cell absorber. Despite a reasonable optical bandgap (~2eV) and absorption coefficient, the power conversion efficiency of the Cs3Bi2I9 mesoscopic solar cells was found to be severely lacking, limited by poor photocurrent density. The efficiency of the Cs3Bi2I9 solar cell can be slightly improved by changing the stoichiometry of the precursor solutions. We have investigated the possible reasons behind the poor performance of Cs3Bi2I9 by transient absorption and luminescence spectroscopy. Comparison between thin-films and single crystals highlights the presence of intrinsic defects in thin-films which act as nonradiative recombination centers.

Heavy ion coulomb excitation and gamma decay studies of the one and two phonon giant dipole resonances in 208Pb and 209Bi

International Nuclear Information System (INIS)

Mueller, P.E.; Beene, J.R.; Bertrand, F.E.; Halbert, M.L.; Olive, D.H.; Varner, R.L.; Sherrill, B.; Thoennessen, M.; Lautridou, P.; Lefevre, F.; Marques, M.; Matulewicz, T.; Mittig, W.; Ostendorf, R.; Roussel-Chomaz, P.; Schutz, Y.; Pol, J. van; Wilschut, H.W.; Diaz, J.; Ferrero, J.L.; Marin, A.

1994-01-01

Projectile - phonon coincidences were measured for the scattering of an 80 MeV/nucleon 64 Zn beam from 208 Pb and 209 Bi targets at the GANIL heavy ion accelerator facility. Projectile-like particles between 0.5 and 4.5 relative to the incident beam direction were detected in the SPEG energy loss spectrometer where their momentum, charge, and mass were determined. Photons were detected in the BaF 2 scintillation detector array TAPS. Light charged particles produced in the reaction were detected in the KVI Forward Wall. The analysis of the data acquired in this experiment is focused on three different phenomena: (1) the two phonon giant dipole resonance, (2) time dependence of the decay of the one phonon giant dipole resonance, and (3) giant resonance strength in projectile nuclei. (orig.)

Trophic Ecology of Benthic Marine Invertebrates with Bi-Phasic Life Cycles: What Are We Still Missing?

Science.gov (United States)

Calado, Ricardo; Leal, Miguel Costa

2015-01-01

The study of trophic ecology of benthic marine invertebrates with bi-phasic life cycles is critical to understand the mechanisms shaping population dynamics. Moreover, global climate change is impacting the marine environment at an unprecedented level, which promotes trophic mismatches that affect the phenology of these species and, ultimately, act as drivers of ecological and evolutionary change. Assessing the trophic ecology of marine invertebrates is critical to understanding maternal investment, larval survival to metamorphosis, post-metamorphic performance, resource partitioning and trophic cascades. Tools already available to assess the trophic ecology of marine invertebrates, including visual observation, gut content analysis, food concentration, trophic markers, stable isotopes and molecular genetics, are reviewed and their main advantages and disadvantages for qualitative and quantitative approaches are discussed. The challenges to perform the partitioning of ingestion, digestion and assimilation are discussed together with different approaches to address each of these processes for short- and long-term fingerprinting. Future directions for research on the trophic ecology of benthic marine invertebrates with bi-phasic life cycles are discussed with emphasis on five guidelines that will allow for systematic study and comparative meta-analysis to address important unresolved questions. © 2015 Elsevier Ltd. All rights reserved.

Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit

Science.gov (United States)

Pan, Weicheng; Wu, Haodi; Luo, Jiajun; Deng, Zhenzhou; Ge, Cong; Chen, Chao; Jiang, Xiaowei; Yin, Wan-Jian; Niu, Guangda; Zhu, Lujun; Yin, Lixiao; Zhou, Ying; Xie, Qingguo; Ke, Xiaoxing; Sui, Manling; Tang, Jiang

2017-11-01

Sensitive X-ray detection is crucial for medical diagnosis, industrial inspection and scientific research. The recently described hybrid lead halide perovskites have demonstrated low-cost fabrication and outstanding performance for direct X-ray detection, but they all contain toxic Pb in a soluble form. Here, we report sensitive X-ray detectors using solution-processed double perovskite Cs2AgBiBr6 single crystals. Through thermal annealing and surface treatment, we largely eliminate Ag+/Bi3+ disordering and improve the crystal resistivity, resulting in a detector with a minimum detectable dose rate as low as 59.7 nGyair s-1, comparable to the latest record of 0.036 μGyair s-1 using CH3NH3PbBr3 single crystals. Suppressed ion migration in Cs2AgBiBr6 permits relatively large external bias, guaranteeing efficient charge collection without a substantial increase in noise current and thus enabling the low detection limit.

Behavior of steels in flowing liquid PbBi eutectic alloy at 420-600 deg. C after 4000-7200 h

International Nuclear Information System (INIS)

Mueller, G.; Heinzel, A.; Konys, J.; Schumacher, G.; Weisenburger, A.; Zimmermann, F.; Engelko, V.; Rusanov, A.; Markov, V.

2004-01-01

This paper presents the results of steel exposure up to 7200 h in flowing LBE at elevated temperatures and is a follow-up paper of that with results of an exposure of up to 2000 h. The examined AISI 316 L, 1.4970 austenitic and MANET 10Cr martensitic steels are suitable as a structural material in LBE (liquid eutectic Pb 45 Bi 55 ) up to 550 deg. C, if 10 -6 wt% of oxygen is dissolved in the LBE. The martensitic steel develops a thick magnetite and spinel layer while the austenites have thin spinel surface layers at 420 deg. C and thick oxide scales like the martensitic steel at 550 deg. C. The oxide scales protect the steels from dissolution attack by LBE during the whole test period of 7200 h. Oxide scales that spall off are replaced by new protective ones. At 600 deg. C severe attack occurs already after 2000 and 4000 h of exposure. Steels with 8-15 wt% Al alloyed into the surface suffer no corrosion attack at all experimental temperatures and exposure times

Electrical properties of Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}–BiFeO{sub 3} multilayers on non-platinized silicon substrate

Energy Technology Data Exchange (ETDEWEB)

Dutta, Shankar, E-mail: shankardutta77@gmail.com [Solid State Physics Laboratory, DRDO, Lucknow Road, Timarpur, Delhi 110054 (India); Chatterjee, Ratnamala [Department of Physics, IIT Delhi, Hauz Khas, New Delhi 110016 (India)

2015-08-15

Highlights: • A Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}/BiFeO{sub 3} multilayer film is deposited on a silicon substrate. • The phase, crystalline structure, and morphology of the film are studied. • The magnetic property of the film is studied. • In the absence of the bottom electrode, interdigitated terminal (IDTs) structures are fabricated on top of the film. • The electrical properties of the film are studied. - Abstract: In this study, a Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}/BiFeO{sub 3} (PZT–BFO) multilayer film is deposited by the sol–gel technique on a silicon substrate. Prior to the multilayer deposition, a ZrO{sub 2} buffer layer is introduced. The multilayer thin film shows the polycrystalline phase-pure perovskite structures of BFO and PZT. Surface morphology study indicates that the grain size of the film varies from 20 to 30 nm. In the absence of the bottom electrode, the electrical properties of the film are studied in-plane by fabricating interdigitated terminals (IDTs) on top of the film. The inter-IDT line gap is kept large (10 μm) to avoid shorting due to unintentional particle contamination. The remnant polarization of the film is found to be ∼35 μC/cm{sup 2} at a 100-V bias. The dielectric constant of the film is found to be 650 at 1 kHz. The film also showed a low leakage current density of ∼4 × 10{sup −9} A/cm{sup 2} at 200 kV/cm.

Identification and management of plant aging and life extension issues for a liquid-metal-cooled reactor

International Nuclear Information System (INIS)

King, R.W.; Perry, W.H.

1991-06-01

Experimental Breeder Reactor 2 (EBR-2) is a pool-type sodium-cooled fast reactor that supports extensive experimental, test and demonstration programs while providing electrical power to the local grid. EBR-2 is a US Department of Energy Facility located at the Idaho National Engineering Laboratory and operated by Argonne National Laboratory (ANL). The current mission of EBR-2 is to serve as the operational prototype for the Integral Fast Reactor demonstration program. This mission and other programs require EBR-2 to operate reliability to a 40-year lifetime, a significant extension beyond the five to ten year life originally planned for the facility. The benefits of operating EBR-2 in the extended-life mode are important for providing long-term operational performance data for a sodium-cooled fast reactor that is not available elsewhere. Identification and preliminary assessment of potential life-limiting factors indicate that, with appropriate consideration given in the design phase, the sodium-cooled plant has potential for a very long operational lifetime. Achievement of a 40-year lifetime with high reliability is important not only for achieving the near-term goals of the EBR-2/IFR programs, but for the advancement of the liquid-metal-cooled reactor concept to the demonstration/commercialization phase. Key features make extended-life operation feasible based on the use of sodium as the primary coolant: low-pressure, high thermal capacity primary system and a low-pressure secondary system requiring no active valves; and limited corrosion of components. 2 refs

Study of photon interactions and shielding properties of silicate glasses containing Bi2O3, BaO and PbO in the energy region of 1 keV to 100 GeV

International Nuclear Information System (INIS)

Chanthima, N.; Kaewkhao, J.; Limsuwan, P.

2012-01-01

Highlights: ► Interaction photon with of silicate glasses containing PbO, BaO and Bi 2 O 3 studied. ► All interactions were changed with energy and composition of glasses. ► Shielding properties of glasses are better than some standard shielding materials. - Abstract: The mass attenuation coefficient (μ/ρ), effective atomic number (Z eff ), effective electron density (N e,eff ) and half-value layer (HVL) of xR m O n :(1 − x)SiO 2 glass system (where R m O n are Bi 2 O 3 , PbO and BaO, with 0.3 ⩽ x ⩽ 0.7 is fraction by weight) have been calculated by theoretical approach using WinXCom program in the energy region from 1 keV to 100 GeV. Also, the HVL of these glass samples has been compared with some standard shielding concretes. The variations of μ/ρ, Z eff , N e,eff and HVL with energy are shown graphically only for total photon interaction. It has been observed that the value of these parameters has been changed with energy and composition of the silicate glasses. The better shielding properties of glass samples were obtained compared with some standard shielding concretes. These results indicated that glasses in the present study can be used as radiation shielding materials.

Suggested search for 207Pb nuclear Schiff moment in PbTiO3 ferroelectric

International Nuclear Information System (INIS)

Mukhamedjanov, T.N.; Sushkov, O.P.

2005-01-01

We suggest two types of experiments, NMR and macroscopic magnetometry, with solid PbTiO 3 to search for the nuclear Schiff moment of 207 Pb. Both kinds of experiments promise substantial improvement over the presently achieved sensitivities. Statistical considerations show that the improvement of the current sensitivity can be up to ten orders of magnitude for the magnetometry experiment and up to seven orders of magnitude for the NMR experiment. Such significant enhancement is due to the strong internal electric field of the ferroelectric, as well as due to the possibility to cool the nuclear-spin subsystem in the compound down to nanokelvin temperatures

208Pb(16O,15O)209Pb reaction

International Nuclear Information System (INIS)

Becchetti, F.D.; Harvey, B.G.; Kovar, D.; Mahoney, J.; Maguire, C.; Scott, D.K.

1975-01-01

The neutron levels in 209 Pb have been studied with the 208 Pb( 16 O, 15 O) reaction at a bomdarding energy of 139 MeV. Spectroscopic factors (S) have been deduced using a finite-range distorted-wave Born approximation (DWBA) with recoil. The 2g 9 / 2 , 1i 11 / 2 , 2g 7 / 2 , and 3d 3 / 2 levels are found to have S approximately-greater-than 0.9 while S approx. = 0.7 for the 1j 15 / 2 level at 1.4 MeV excitation. Evidence is found for other 1j 15 / 2 fragments being at 3.05 MeV and approx. 3.8 MeV with S approx. = 0.08 and 0.26, respectively, which would place the centroid of the 1j 15 / 2 level at E/subx/ approx. = 2.2 MeV. DWBA predicts a shift in the maxima of the angular distributions as a function of Q value which is not observed experimentally. A comparison with the proton transfer reaction 208 Pb( 16 O, 15 N) 209 Bi has been used to deduce the geometrical parameters of a neutron shell model potential appropriate for nuclei with A approximately-greater-than 200. The parameters of this Wood-Saxon potential are: V/subR/=-50.5 MeV,r/subR/=1.19 fm, a/subR/=0.75 fm, V)=-5.5 MeV, r)=1.01 fm, and a)=0.75 fm

Preliminary study of geotectonic evolution of the southern region of Sao Francisco (MG, Brazil) craton: an interpretation based on Rb-Sr, K-Ar, Pb-Pb and fission track data

International Nuclear Information System (INIS)

Teixeira, W.; Fonseca, A.C.; Poupeau, G.; Padilha, A.V.; Zapparolli, L.H.; Kawashita, K.; Khoury, M.C.

1985-01-01

The results obtained from isotopic dating techniques (Rb-Sr, K-Ar, Pb-Pb and fission tracks) applied to samples from the southern region of Sao Francisco craton (Mg, Brazil) are discussed. Rb-Sr and Pb-Pb ages, in total rock, allowed the determination of crust enlargement, with eventual modifications of the pre-existing crust, during the Late Archean period (3000 to 2600 million years) and the Inferior Proterozoic period (2400 to 2100 m.y.). Three main cooling periods of time were determined by K-Ar dating of mica, amphiboles and total rock at the craton border: 2200 to 1700 m.y., 1300 to 1100 m.y. and 900 to 400 m.y. related, respectively, to superposition of three cycles: Transamazonico, Uruacuano and Brasiliano. Cooling below 110 0 C, detected by the fission track method applied to apatites, pointed out an age of 850 m.y. at the internal parts and 550 m.y. at the craton periphery, thus showing a progressive action of Brazilian marginal movable zones in the studied region. The application of these two techniques together enabled the evaluation of the rocks cooling shape. Cooling of these samples was complex between 2700 and 2200 m.y. and slow from 2000 m.y. onwards. The integrated treatment of data from the various dating techniques is of great importance to know the geotectonic evolution of ancient polycyclic sites. (C.L.B.) [pt

First principles study of (Cd, Hg, In, Tl, Sn, Pb, As, Sb, Bi, Se) modified Pt(111), Pt(100) and Pt(211) electrodes as CO oxidation catalysts

DEFF Research Database (Denmark)

Tripkovic, Vladimir

2015-01-01

. The coverage dependence as a function of potential for ten different adatom species (Cd, Hg, In, Tl, Sn, Pb, As, Sb, Bi, Se) on bare and CO saturated Pt(111), Pt(100) and Pt(211) surfaces has been established by means of Density Functional Theory calculations. Most of the adatoms are very stable under standard......, given by the OH formation potentials from water, is dependent on the oxophilicity of the adatoms, and is found to scale almost inversely with the adatom stability. In electrolyte solutions saturated with CO, the stability reduces to roughly half of that on bare Pt surfaces. Irrespective of the CO...

Reaction products between Bi-Sr-Ca-Cu-oxide thick films and alumina substrates

International Nuclear Information System (INIS)

Alarco, J.A.; Ilushechkin, A.; Yamashita, T.; Bhargava, A.; Barry, J.; Mackinnon, I.D.R.

1997-01-01

The structure and composition of reaction products between Bi-Sr-Ca-Cu-oxide (BSCCO) thick films and alumina substrates have been characterized using a combination of electron diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry (EDX). Sr and Ca are found to be the most reactive cations with alumina. Sr 4 Al 6 O 12 SO 4 is formed between the alumina substrates and BSCCO thick films prepared from paste with composition close to Bi-2212 (and Bi-2212+10 wt.% Ag). For paste with composition close to Bi(Pb)-2223 +20 wt.% Ag, a new phase with f.c.c. structure, lattice parameter about a=24.5 A and approximate composition Al 3 Sr 2 CaBi 2 CuO x has been identified in the interface region. Understanding and control of these reactions is essential for growth of high quality BSCCO thick films on alumina. (orig.)

Spectroscopic features of Ni(2+) ion in PbO-Bi2O3-SiO2 glass system.

Science.gov (United States)

Suresh, B; Srinivasa Reddy, M; Siva Sesha Reddy, A; Gandhi, Y; Ravi Kumar, V; Veeraiah, N

2015-04-15

Glasses of the composition (30-x)PbO-5Bi2O3-65SiO2: xNiO (with x ranging from 0 to 1.0 mol%) were synthesized. A variety of spectroscopic studies, viz., IR, Raman optical absorption and luminescence properties of these glasses have been carried out as a function of NiO concentration. The analysis of results of all these studies has indicated that the nickel ions occupy both octahedral and tetrahedral positions. However, with the increase of NiO concentration the octahedral occupancy of Ni(2+) ions prevailed over the tetrahedral ions. The luminescence spectra of these glasses have exhibited a broad NIR emission band in region 1100-1500 nm. This band is identified as being due to (3)T2(3F)→(3)A2(3F) octahedral transition of Ni(2+) ions. The luminescence efficiency and cross section have been found to be the highest for the glass containing the highest concentration of NiO. The reasons for such high luminescence efficiency have been discussed in the light of structural variations taking place in the host glass network. Copyright © 2015 Elsevier B.V. All rights reserved.

Microscopic fracture of filaments and its relation to the critical current under bending deformation in (Bi,Pb)2Sr2Ca2Cu3O10 composite superconducting tapes

International Nuclear Information System (INIS)

Hojo, Masaki; Nakamura, Mitsuhiro; Matsuoka, Tomoe; Tanaka, Mototsugu; Ochiai, Shojiro; Sugano, Michinaka; Osamura, Kozo

2003-01-01

The strain dependence of the critical current, I c , of (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O 10 (Bi2223)/Ag/Ag-Mg composite superconducting tapes has been studied both experimentally and analytically under bending deformation. Tests have been carried out for one type of tape used in the VAMAS bending round-robin programme. The complex stress-strain behaviour of each component was first analysed in tension. This was done by comparing the stress-strain curves of composite tapes with those of Ag and Ag-Mg alloy tapes. Here, the plastic deformation (work hardening) of Ag and Ag-Mg alloy, and the thermal residual strain due to the manufacturing process were taken into account. The fracture strain of Bi2223 filaments was inversely determined as 0.08% to meet the global tensile stress-strain curve of the composite tape. The calculated stress-strain curves finally agreed well with the experimental results when the as-supplied bending strain was taken into account. Then, the analysis was modified to fit the bending deformation. Here, the movement of the neutral axis due to the non-symmetric and elastic-plastic stress-strain curves of the components and their Bauschinger effect were taken into account. The relative decrease of I c with the increase in the Bi2223 tape curvature was calculated from the volume fraction of the broken filaments. The calculated I c agreed well with the experimental results when the movement of the neutral axis and the Bauschinger effect were taken into account. Microscopic observation of the spatial distribution of the filament fracture indicated that the damage occurred at the outermost layer on the tensile side when the curvature was small, and then the damage front shifted to the inside layers. The observed fracture behaviour of the Bi2223 filament agreed well with the estimated location based on the above analysis

Facile fabrication of a novel 3D graphene framework/Bi nanoparticle film for ultrasensitive electrochemical assays of heavy metal ions

Energy Technology Data Exchange (ETDEWEB)

Shi, Lei [State Key Laboratory of Lake Science and Environment, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008 (China); Li, Yangyang; Rong, Xiaojiao [School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Wang, Yan [State Key Laboratory of Lake Science and Environment, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008 (China); Ding, Shiming, E-mail: smding@niglas.ac.cn [State Key Laboratory of Lake Science and Environment, Nanjing Institute of Geography and Limnology, Chinese Academy of Sciences, Nanjing 210008 (China)

2017-05-22

In this work, a novel 3D graphene framework/Bi nanoparticle (GF/BiNP) film was fabricated with a facile preparation route. 3D graphene framework with porous structures was electrochemically reduced and in situ assembled on the electrode, and BiNPs with tunable morphologies were highly dispersed on the framework by a chemical reduction. Newly-designed 3D GF/BiNP film possessed a significantly large active area, fast electron transfer ability, high mass transfer efficiency, and excellent structure stability and binding strength on electrode. To demonstrate its superior ability, electrochemical sensors for the assay of heavy metal ions were constructed. As a result, a simultaneous assay of Pb{sup 2+} and Cd{sup 2+} with ultralow detection limits (0.02 μg L{sup −1} of Pb{sup 2+} and 0.05 μg L{sup −1} of Cd{sup 2+}, S/N = 3) and a wide linear range from 1 to 120 μg L{sup −1} was achieved. Meanwhile, a separate analysis of Zn{sup 2+} was performed to get optimum responses, in which a low detection limit of 4.0 μg L{sup −1} (S/N = 3) with a linear range from 40 to 300 μg L{sup −1} was observed, confirming the versatility of the GF/BiNP film in the detection of heavy metal ions. Moreover, excellent repeatability, reproducibility and stability, and reliable assays in real water samples were realized with constructed sensors. Due to its convenient preparation, favorable structures and excellent properties, prepared 3D GF/BiNP film will find great potential for advanced applications in environment, biomedicine and energy systems. - Highlights: • A novel 3D graphene framework/Bi nanoparticle (GF/BiNP) film is prepared. • Porous graphene framework is in situ assembled on the electrode. • BiNPs with tunable morphologies are highly dispersed on the framework. • Newly-designed 3D GF/BiNP film possesses excellent properties. • Sensitive electrochemical sensors for Pb{sup 2+}, Cd{sup 2+} and Zn{sup 2+} are constructed.

Thermally activated dissipation and critical field Hc2 in c-oriented high-Tc Bi-Pb-Sr-Ca-Cu-O thin film

International Nuclear Information System (INIS)

Wang, Y.H.; Cui, C.G.; Zhang, Y.Z.; Li, S.L.; Li, J.; Li, L.

1991-01-01

A set of resistivity-temperature (R-T) curves measured under various applied fields in a high-T c Bi-Pb-Sr-Ca-Cu-O thin film which has a zero-resistance temperature T c0 of 110 K is reported. The remarkable broadening of the transition width is discussed under the flux-creep model, considering the very short coherence length of this oxide superconductor. The resistivity is thermally activated, which is consistent with the Arrhenius law with a magnetic field and orientation-dependent activation energy U 0 (H,Θ). The U 0 (H,Θ) has a very high value of 381.6 meV under a field of 0.1 T parallel to the c axis. The upper critical field H c2 determined from these R-T curves shows high values and the effect of flux creep to the H c2 (0) is examined by the irreversible behavior with the ''giant'' flux-creep model

Magnetic properties in MnBi alloy of small crystallites for permanent magnet devices

Energy Technology Data Exchange (ETDEWEB)

Sharma, S. K.; Prakash, H. R.; Ram, S., E-mail: jms.sanjeev@gmail.com [Materials Science Centre, Indian Institute of Technology, Kharagpur-721302 (India)

2016-05-06

A rare-earth free alloy like MnBi is a potential candidate for developing small magnets and devices. In a commercially viable method, a MnBi alloy was prepared by arc melting Mn and Bi metals in a 1:1 ratio. In terms of the X-ray diffraction a single crystalline MnBi phase is formed of the as prepared alloy. FESEM images delineate thin MnBi layers (25 – 40 nm thickness) of average EDX composition throughout the specimen. A large coercivity 5.501 kOe (6.5 emu/g magnetization) observed in an M-H at 300 K is decreased to 0.171 (9.0 emu/g magnetization) at 100 K in decreasing upon cooling.

Investigation of structural and electrical properties of (1 - x) Bi0.5Mg0.5TiO3-(x) PbTiO3 ceramic system

International Nuclear Information System (INIS)

Rai, Radheshyam; Sinha, Abinhav; Sharmac, Seema; Sinha, N.K.P.

2009-01-01

[(BiMg 0.5 Ti 0.5 O 3 ) 1-x ][PbTiO 3 ] x (BMT-PT) ceramic powders of different compositions were prepared by solid-state reaction method. X-ray diffraction analysis of the compounds suggest the structural change (rhombohedral to tetragonal) in these ceramics. SEM photographs exhibit the uniform distribution of grains with less porosity. Polarization vs. electric field (P-E) studies show maximum remanent polarization (P r ∼ 7.9 μC/cm 2 ) for composition x = 0.34. The dielectric peaks were found to be broadened that indicates the existence of diffuse phase transition. Diffusivity (γ) study of phase transition in these compounds provided values between 1 and 2 indicating the variation of degree of disorderness in the system.

Fuel research for subcritical and critical GEN-IV systems cooled by heavy liquid metal

International Nuclear Information System (INIS)

Sobolev, V.; Verwerft, M.

2009-01-01

The participation of the Belgian Nuclear Research Centre SCK-CEN in the worldwide GEN-IV research can be considered as an opportunity. Today's GEN-IV research at SCK-CEN is mainly driven by the interests of the project MYRRHA (Multipurpose hYbrid Research Reactor for High-tech Applications). The main goal of this project is to build at SCK-CEN in Mol a new generation fast spectrum, subcritical, research and materials testing reactor MYRRHA driven by a high-energy proton accelerator. This GEN-IV MTR is cooled by heavy liquid metal (Pb-Bi) and will be used for the ADS concept demonstration, testing and qualification of new fuels, transmutation targets and innovative materials. On the European scale, MYRRHA is integrated in the Euratom FP6 Integrated Project (IP) EUROTRANS (EUROpean research programme for TRANSmutation of high level nuclear waste in an accelerator driven system), as the small-scale experimental machine for transmutation demonstration called XT-ADS. Last but not least, this experimental facility will also demonstrate the technological feasibility of the LFR (Lead-cooled Fast Reactor) GEN-IV concept; in EU the LFR design studies are performed in the framework of the Euratom FP6 ELSY (European Lead-cooled SYstem) project, where SCK-CEN is a partner. Among the research needed to ensure a safe and reliable operation of the MYRRHA/XT ADS reactor, the development and qualification of fuel and cladding materials have been recognized as one of the main key issues to be addressed

Preparation and characterization of Ag-added Bi1⋅84Pb0 ...

Indian Academy of Sciences (India)

Unknown

microscopy (SEM), electrical transport and a.c. susceptibility techniques. The tube ... high current conductor is high Jc. However, non-textured, porous structure with ... contact resistance studies on Ag added (0–25 wt%) Bi-. 2223 bulk tubes ...

Anodic stripping voltammetric determination of traces of Pb(II) and Cd(II) using a glassy carbon electrode modified with bismuth nanoparticles

International Nuclear Information System (INIS)

Yang, Die; Wang, Liang; Chen, Zuliang; Megharaj, Mallavarapu; Naidu, Ravi

2014-01-01

We report on a glassy carbon electrode modified with bismuth nanoparticles (NanoBiE) for the simultaneous determination Pb 2+ and Cd 2+ by anodic stripping voltammetry. Operational parameters such as bismuth nanoparticles labelling amount, deposition potential, deposition time and stripping parameters were optimized with respect to the determination of Pb 2+ and Cd 2+ in 0.1 M acetate buffer solution (pH 4.5). The NanoBiE gives well-defined, reproducible and sharp stripping peaks. The peak current response increases linearly with the metal concentration in a range of 5.0–60.0 μg L −1 , with a detection limit of 0.8 and 0.4 μg L −1 for Pb 2+ and Cd 2+ , respectively. The morphology and composition of the modified electrode before and after voltammetric measurements were analysed by scanning electron microscopy and energy dispersive X-ray analysis. The NanoBiE was successfully applied to analysis of Pb 2+ and Cd 2+ in real water samples and the method was validated by ICP-MS technique, suggesting that the electrode can be considered as an interesting alternative to the bismuth film electrode for possible use in electrochemical studies and electro analysis. (author)

Validation of {sup 226}Ra, {sup 228}Ra and {sup 210}Pb measurements in soil and sediment samples through high resolution gamma ray spectrometry

Energy Technology Data Exchange (ETDEWEB)

Dias, Danila Carrijo da Silva; Silva, Nivaldo Carlos da; Bonifacio, Rodrigo Leandro; Guerrero, Eder Tadeu Zenun [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

2013-07-01

Radionuclides found in ore extraction waste materials are a great source of concern regarding public health and environmental safety. One technique to determine the concentration of substances is high resolution gamma ray spectrometry using HPGe. Validating a measurement technique is essential to warrant high levels of quality to any scientific work. The Laboratory of Pocos de Caldas of the Brazilian Commission for Nuclear Energy partakes into a Quality Management System project, seeking Accreditation under ISO/IEC 17025 through the validation of techniques of chemical and radiometric analysis of environmental samples from water, soil and sediment. The focus of the Radon Laboratory at LAPOC is validation of Ra-226, Ra-228 and Pb-210 concentration determinations in soil and sediment through a gamma spectrometer system. The stages of this validation process included sample reception and preparation, detector calibration and sample analyses. Dried samples were sealed in metallic containers and analyzed after radioactive equilibrium between Ra-226 and daughters Pb-214 and Bi-214. Gamma spectrometry was performed using CANBERRA HPGe detector and gamma spectrum software Genie 2000. The photo peaks used for Ra-226 determination were 609 keV and 1020 keV of Bi-214 and 351 keV of Pb-214. For the Ra-228 determination a photopeak of 911 keV was used from its short half-life daughter Ac-228 (T1/2 = 6.12 h). For Pb-210, the photopeak of 46.5 keV was used, which, due to the low energy, self-absorption correction was needed. Parameters such as precision, bias/accuracy, linearity, detection limit and uncertainty were evaluated for that purpose. The results have pointed to satisfying results. (author)

EPR and FTIR spectroscopic studies of MO-Al2O3-Bi2O3-B2O3-MnO2(M = Pb, Zn and Cd) glasses

Science.gov (United States)

Lalitha Phani, A. V.; Sekhar, K. Chandra; Chakradhar, R. P. S.; Narasimha Chary, M.; Shareefuddin, Md

2018-03-01

Glasses of the system (30-x)MO-xAl2O3-15Bi2O3-54.5B2O3-0.5MnO2 [M = Pb, Zn & Cd] (x = 0, 5, 10 & 15 mol%) were prepared by the normal melt quenching method. The amorphous nature of the prepared glasses was confirmed by the XRD studies. The EPR and FTIR studies were carried out at room temperature (RT). The EPR spectra exhibited three resonance signals at g ≈ 2.0 with a hyperfine structure, an absorption around g = 4.3 and a distinct shoulder at g = 3.3. Deconvoluted spectra were drawn for g ≈ 2.0 to resolve the six hyperfine lines. The electron paramagnetic resonance signal at g ≈ 2.0 indicates that the Mn2+ ions are in nearly perfectly octahedral symmetry. The low field signals at g = 3.3 and g = 4.3 are attributed to the Mn2+ ion which are in distorted rhombic symmetries. The hyperfine (HF) splitting constant (A) values suggested that the bonding between Mn2+ ions and its ligands is ionic in nature. The presence of BO3 and BO4 borate units, metal oxide cation units, Mn2+ and Bi-O bond vibrations in BiO3 units were noticed from the FTIR spectra.

Leaching of APC residues from secondary Pb metallurgy using single extraction tests: the mineralogical and the geochemical approach.

Science.gov (United States)

Ettler, Vojtech; Mihaljevic, Martin; Sebek, Ondrej; Strnad, Ladislav

2005-05-20

Two air-pollution-control (APC) residues--one from flue gas cooling with alkaline water and one from deionized water cooling--from secondary lead metallurgy were submitted to two different standardized short-term leaching protocols: US EPA toxicity characteristic leaching procedure (TCLP) and static leaching according to Czech/European norm EN 12457-2. The experimental procedure was coupled with detailed mineralogical investigation of the solid material (SEM, XRPD) and speciation-solubility calculations using the PHREEQC-2 geochemical code. Both types of residues were considered as hazardous materials exhibiting substantial leaching of Pb (up to 7130 mg/l) and other inorganic contaminants. However, the APC residue produced by flue gas cooling with alkaline water (sample B) exhibits more favourable leaching and environmental characteristics than that produced by simple deionised water cooling (sample A). At pH 6, phosgenite (PbCl2.PbCO3) became the dominant secondary phase. The results are consistent with the mineralogical and geochemical studies focused on acidic forest soils highly polluted by smelter emissions, where anglesite, as a unique Pb-bearing phase, has been detected. From the technological point of view, the mixing of APC residue with alkaline water, followed by an increase in the suspension pH and equilibration with atmospheric CO2, may be used to ensure the precipitation of less soluble Pb carbonates, which are more easily recycled in the Pb recovery process in the metallurgical plant.

Fission cross section calculations for 209Bi target nucleus based on fission reaction models in high energy regions

Directory of Open Access Journals (Sweden)

Kaplan Abdullah

2015-01-01

Full Text Available Implementation of projects of new generation nuclear power plants requires the solving of material science and technological issues in developing of reactor materials. Melts of heavy metals (Pb, Bi and Pb-Bi due to their nuclear and thermophysical properties, are the candidate coolants for fast reactors and accelerator-driven systems (ADS. In this study, α, γ, p, n and 3He induced fission cross section calculations for 209Bi target nucleus at high-energy regions for (α,f, (γ,f, (p,f, (n,f and (3He,f reactions have been investigated using different fission reaction models. Mamdouh Table, Sierk, Rotating Liquid Drop and Fission Path models of theoretical fission barriers of TALYS 1.6 code have been used for the fission cross section calculations. The calculated results have been compared with the experimental data taken from the EXFOR database. TALYS 1.6 Sierk model calculations exhibit generally good agreement with the experimental measurements for all reactions used in this study.

BiDil: from another vantage point.

Science.gov (United States)

Puckrein, Gary

2006-01-01

In a recent Health Affairs Web Exclusive, Pamela Sankar and Jonathan Kahn argue against the Food and Drug Administration's approval of BiDil as a new drug for the treatment of heart failure in African Americans. Their paper questions the existence of disparities between African American and other heart-failure patients and the motivations of BiDil's developers and manufacturer. The disparities are confirmed and persistent, however, and BiDil's effectiveness is proven. If the authors' logic were to prevail, patients would be denied life-saving therapy. Continued investigation will likely narrow identification of patients who will benefit.

Determination of 210Pb and 210Po in cigarette tobacco

International Nuclear Information System (INIS)

Peres, Ana Claudia

1999-01-01

Cigarette smoking is one of the important pathways that could contribute to enhance the radiation dose to man, due to the relatively large concentrations of 210 Pb and 210 Po found in tobacco leaves. In this work, concentrations of these two radionuclides were determined in eight of the most commercialized cigarette brands produced in Brazil. The samples analyzed were bought randomly in the market. The 210 Pb was determined by counting the beta activity of the 210 Bi in a gas flow proportional detector, after radiochemical separation and precipitation of the PbCr0 4 . The 210 Po was determined by alpha spectrometry, using a surface barrier detector, after radiochemical separation and spontaneous deposition of Po in copper disk. The results showed concentrations ranging from 11,9 to 30,2 mBq per gram of dry tobacco for 210 Pb and from 10,9 to 27,4 mBq per gram of dry tobacco for 210 Po. (author)

The Development and Production of a Functionally Graded Composite for Pb-Bi Service

Energy Technology Data Exchange (ETDEWEB)

Ballinger, Ronald G

2011-08-01

A material that resists lead-bismuth eutectic (LBE) attack and retains its strength at 700°C would be an enabling technology for LBE-cooled reactors. No single alloy currently exists that can economically meet the required performance criteria of high strength and corrosion resistance. A Functionally Graded Composite (FGC) was developed with layers engineered to perform these functions. F91 was chosen as the structural layer of the composite for its strength and radiation resistance. Fe-12Cr-2Si, an alloy developed from previous work in the Fe-Cr-Si system, was chosen as the corrosion-resistant cladding layer because of its chemical similarity to F91 and its superior corrosion resistance in both oxidizing and reducing environments. Fe-12Cr-2Si experienced minimal corrosion due to its self-passivation in oxidizing and reducing environments. Extrapolated corrosion rates are below one micron per year at 700ï°C. Corrosion of F91 was faster, but predictable and manageable. Diffusion studies showed that 17 microns of the cladding layer will be diffusionally diluted during the three year life of fuel cladding. 33 microns must be accounted for during the sixty year life of coolant piping. 5 cm coolant piping and 6.35 mm fuel cladding preforms were produced on a commercial scale by weld-overlaying Fe-12Cr-2Si onto F91 billets and co-extruding them. An ASME certified weld was performed followed by the prescribed quench-and-tempering heat treatment for F91. A minimal heat affected zone was observed, demonstrating field weldability. Finally, corrosion tests were performed on the fabricated FGC at 700ï°C after completely breaching the cladding in a small area to induce galvanic corrosion at the interface. None was observed. This FGC has significant impacts on LBE reactor design. The increases in outlet temperature and coolant velocity allow a large increase in power density, leading to either a smaller core for the same power rating or more power output for the same size

Annealing effects on room temperature thermoelectric performance of p-type thermally evaporated Bi-Sb-Te thin films

Science.gov (United States)

Singh, Sukhdeep; Singh, Janpreet; Tripathi, S. K.

2018-05-01

Bismuth antimony telluride (Bi-Sb-Te) compounds have been investigated for the past many decades for thermoelectric (TE) power generation and cooling purpose. We synthesized this compound with a stoichiometry Bi1.2Sb0.8Te3 through melt cool technique and thin films of as synthesized material were deposited by thermal evaporation. The prime focus of the present work is to study the influence of annealing temperature on the room temperature (RT) power factor of thin films. Electrical conductivity and Seebeck coefficient were studied and power factors were calculated which showed a peak value at 323 K. The compounds performance is comparable to some very efficient Bi-Sb-Te reported stoichiometries at RT scale. The values observed show that material has an enormous potential for energy production at ambient temperature scales.

Acid-base equilibrium. A thermodynamic study of formation and stability of the Bi-2223 phase

International Nuclear Information System (INIS)

Xi, Z.; Zhou, L.

1993-01-01

A general acid-base equilibrium theory was proposed to explain the formation and stability of the Bi-2223 phase based on the Lewis acid base theory and principle of metallurgical physical chemistry. The acid-base nature of oxide was defined according to the electrostatic force between cation and oxygen anion. A series of experimental facts were systematically explained based on the theory: substitution of Bi for Ca in the Pb-free 2223 phase, and the effect of substitution of the high-valent cation for Bi 3+ ; oxygen-pressure atmosphere, and the heat-schocking technique on the formation and stability of the 2223 phase. 14 refs., 2 tabs

An overview of dual coolant Pb-17Li breeder first wall and blanket concept development for the US ITER-TBM design

Energy Technology Data Exchange (ETDEWEB)

Wong, Clement; Malang, S.; Sawan, M.; Dagher, Mohamad; Smolentsev, S.; Merrill, Brad; Youssef, M.; Reyes, Susanna; Sze, Dai Kai; Morley, Neil B.; Sharafat, Shahran; Calderoni, P.; Sviatoslavsky, G.; Kurtz, Richard J.; Fogarty, Paul J.; Zinkle, Steven J.; Abdou, Mohamed A.

2006-02-01

An attractive blanket concept for the fusion reactor is the dual coolant Pb-17Li liquid (DCLL) breeder design. Reduced activation ferritic steel (RAFS) is used as the structural material. Helium is used to cool the first wall and blanket structure, and the self-cooled breeder Pb-17LI is circulated for power conversion and for tritium breeding. A SiCf/SiC composite insert is used as the magnetohydrodynamic (MHD) insulation to reduce the impact from the MHD pressure drop of the circulating Ph-17Li and as the thermal insulator to separate the high temperature Pb-17Li from the helium cooled RAFS structure.

The Activation Mechanism of Bi3+ Ions to Rutile Flotation in a Strong Acidic Environment

Directory of Open Access Journals (Sweden)

Wei Xiao

2017-07-01

Full Text Available Lead hydroxyl compounds are known as rutile flotation of the traditional activated component, but the optimum pH range for flotation is 2–3 using styryl phosphoric acid (SPA as collector, without lead hydroxyl compounds in slurry solution. In this study, Bi3+ ions as a novel activator was investigated. The results revealed that the presence of Bi3+ ions increased the surface potential, due to the specific adsorption of hydroxyl compounds, which greatly increases the adsorption capacity of SPA on the rutile surface. Bi3+ ions increased the activation sites through the form of hydroxyl species adsorbing on the rutile surface and occupying the steric position of the original Ca2+ ions. The proton substitution reaction occurred between the hydroxyl species of Bi3+ ions (Bi(OHn+(3−n and the hydroxylated rutile surface, producing the compounds of Ti-O-Bi2+. The micro-flotation tests results suggested that Bi3+ ions could improve the flotation recovery of rutile from 61% to 90%, and from 61% to 64% for Pb2+ ions.

17O knight shifts of the various types of CuO2 planes in Bi-cuprates high-Tc superconductors

International Nuclear Information System (INIS)

Le Noc, L.; Trokiner, A.; Schneck, J.; Pougnet, A.M.; Mellet, R.; Primot, J.; Savary, H.

1992-01-01

A 17 O NMR study has been performed on a 17 O enriched powder sample of (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O y , also called n=3 phase (with Tc=110K) which belongs to the Bi-based superconductors family (Bi,Pb) 2 Sr 2 Ca n-1 Cu n O 2n+4 . The n=3 compound which contains in its unit cell two types of CuO 2 planes (labelled type I and II), is compared to the n=2 compound where only one type of CuO 2 planes (type I) is present. 17 O Knight shift measurements versus temperature, in the normal phase, have allowed us to evidence the distinct behaviours of the two types of planes present in the n=3 compound. The results are consistent with the existence of stronger electron correlations, or smaller charge carrier density in the type II planes. 14 refs., 3 figs

Thermal and exhumation history of Sakhalin Island (Russia) constrained by apatite U-Pb and fission track thermochronology

Science.gov (United States)

Glorie, Stijn; Alexandrov, Igor; Nixon, Angus; Jepson, Gilby; Gillespie, Jack; Jahn, Bor-Ming

2017-08-01

Sakhalin Island represents a key locality to study the tectonic evolution of the western Pacific. The island is located at the Amur-Okhotsk plate margin and records a complex thermotectonic history. Apatite double dating (U-Pb and fission track) and thermal history modelling were applied to three late Eocene granitoid massifs within central and southern Sakhalin: the Aniva, Okhotsk and Langeri complexes. Apatite U-Pb results yield consistent late Eocene (∼40-37 Ma) ages, suggesting rapid post-magmatic cooling. Apatite fission track results reveal bimodal age distributions with late Eocene - early Oligocene (∼38-33 Ma) and early Miocene (∼20-17 Ma) age populations that can be correlated with variations in Uranium and Chlorine concentrations. Thermal history modelling translates the AFT age bimodality into two-phase cooling histories. The timing of the early cooling phase (∼38-33 Ma) corresponds with the apatite U-Pb ages, indicating rapid cooling to at least ∼100 °C during the late Oligocene. The second cooling phase at ∼20-17 Ma cooled the samples to near-surface temperatures. Both cooling phases correspond with regional unconformities and subsequent accelerations in sedimentation rate, suggesting that cooling was a response to rapid exhumation. In addition, our data suggests that the studied terranes record differential exhumation with respect to the structural architecture. The Miocene exhumation pulse is coeval with the timing of transpressional fault displacement and the subsequent opening of the Kuril Basin.

Comparison of electrochemical performance of as-cast Pb-1 wt.% Sn and Pb-1 wt.% Sb alloys for lead-acid battery components

Energy Technology Data Exchange (ETDEWEB)

Osorio, Wislei R.; Peixoto, Leandro C.; Garcia, Amauri [Department of Materials Engineering, University of Campinas - UNICAMP, PO Box 612, 13083-970 Campinas, SP (Brazil)

2010-03-15

A comparative experimental study of the electrochemical features of as-cast Pb-1 wt.% Sn and Pb-1 wt.% Sb alloys is carried out with a view to applications in the manufacture of lead-acid battery components. The as-cast samples are obtained using a water-cooled unidirectional solidification system. Pb-Sn and Pb-Sb alloy samples having similar coarse cell arrays are subjected to corrosion tests in order to assess the effect of Sn or Sb segregation in the cell boundary on the electrochemical performance. Electrochemical impedance spectroscopy (EIS) diagrams, potentiodynamic polarization curves and an equivalent circuit analysis are used to evaluate the electrochemical parameters in a 0.5 M H{sub 2}SO{sub 4} solution at 25 C. Both the experimental and simulated EIS parameters evidence different kinetics of corrosion. The Pb-1 wt.% Sn alloy is found to have a current density which is of about three times lower than that of the Pb-1 wt.% Sb alloy which indicates that dilute Pb-Sn alloys have higher potential for application as positive grid material in maintenance-free Pb-acid batteries. (author)

Effects of Bi-2212 addition on the levitation force properties of bulk MgB2 superconductors

International Nuclear Information System (INIS)

Taylan Koparan, E.; Savaskan, B.; Guner, S.B.; Celik, S.

2016-01-01

We present a detailed investigation of the effects of Bi 2 Sr 2 Ca 1 Cu 2 O 8+κ (Bi-2212) adding on the levitation force and magnetic properties of bulk MgB 2 obtained by hot press method. The amount of Bi-2212 was varied between 0 and 10 wt% (0, 2, 4, 6, 10 wt%) of the total MgB 2 . Moreover, we present MgB 2 bulk samples fabricated by using different production methods including hot pressing method to our knowledge. All samples were prepared by using elemental magnesium (Mg) powder, amorphous nano-boron (B) powder and Bi-2212 powder which are produced by hot press method. As a result of hot press process, compact pellet samples were manufactured. The vertical and lateral levitation force measurements were executed at the temperatures of 20, 24 and 28 K under zero-field-cooled (ZFC) and field-cooled (FC) regimes for samples with various adding levels. At 24 K and 28 K under ZFC regime, the 2 wt% Bi-2212 added sample exhibits a higher vertical levitation force than the pure sample. Bi-2212 added MgB 2 samples compared to the pure sample have lower attractive force values in FC regime. The magnetic field dependence of the critical current density J c was calculated from the M-H loops for Bi-2212 added MgB 2 samples. The 2 wt% Bi-2212 added sample has the best levitation and critical current density performance compared to other samples. The critical temperature (T c ) has slightly dropped from 37.8 K for the pure MgB 2 sample to 36.7 K for the 10 wt% of Bi-2212 added sample. The transition temperature slightly decreases when Bi-2212 adding level is increased. (orig.)

Structure of $^{191}$Pb from $\\alpha$- and $\\beta$-decay spectroscopy

CERN Document Server

Cocolios, T E; Van de Walle, J; Franchoo, S; Marsh, B A; Sjoedin, A M; Huyse, M; Zemlyanoy, S; Cocolios, T E; Bastin, B; Barzakh, A; Page, R D; Mane, E; Van Duppen, P; Darby, I G; Venhart, M; Kudryavtsev, Yu; Huber, G; Fedosseev, V N; Andreyev, A N; Keupers, M; Flanagan, K T; Stefan, I; Dexters, W; Koester, U; Antalic, S; Buscher, J; Molkanov, P; Fedorov, D V

2010-01-01

Complementary studies of $^{191}$Pb have been made in the $\\beta$- decay of $^{191}$Bi at LISOL (CRC) and in the $\\alpha$- decay of $^{195}$Po at ISOLDE (CERN). Fine structures in the $\\alpha$- decay of the low-spin and high-spin isomers of $^{195}$Po have been fully resolved. Identification of the parent state is made possible via isomer selection based on narrow-band laser frequency scanning. The $\\alpha$-particle and $\\gamma$-ray energies have been determined with greater precision. New $\\alpha$-particle and $\\gamma$-ray energies are identified. Branching ratios in the decay of $^{195}$Po and $^{191}$Pb have been examined.

Determination of {sup 210}Pb and {sup 210}Po in cigarette tobacco; Determinacao de {sup 210}Pb e {sup 210}Po em tabaco de cigarros nacionais

Energy Technology Data Exchange (ETDEWEB)

Peres, Ana Claudia

1999-07-01

Cigarette smoking is one of the important pathways that could contribute to enhance the radiation dose to man, due to the relatively large concentrations of {sup 210}Pb and {sup 210}Po found in tobacco leaves. In this work, concentrations of these two radionuclides were determined in eight of the most commercialized cigarette brands produced in Brazil. The samples analyzed were bought randomly in the market. The {sup 210}Pb was determined by counting the beta activity of the {sup 210}Bi in a gas flow proportional detector, after radiochemical separation and precipitation of the PbCr0{sub 4}. The {sup 210}Po was determined by alpha spectrometry, using a surface barrier detector, after radiochemical separation and spontaneous deposition of Po in copper disk. The results showed concentrations ranging from 11,9 to 30,2 mBq per gram of dry tobacco for {sup 210}Pb and from 10,9 to 27,4 mBq per gram of dry tobacco for {sup 210}Po. (author)

Resistance–temperature relation and atom cluster estimation of In–Bi system melts

International Nuclear Information System (INIS)

Geng, Haoran; Wang Zhiming; Zhou Yongzhi; Li Cancan

2012-01-01

Highlights: ► A testing device was adopted to measure the electrical resistivity of In–Bi system melts. ► A basically linear relation exists between the resistivity and temperature of In x Bi 100−x melts in measured temperature range. ► Based on Novakovic's assumption, the content of InBi atomic cluster in In x Bi 100−x melt is estimated with ρ ≈ ρ InBi x InBi + ρ m (1 − x InBi ) equation. - Abstract: A testing device for the resistivity of high-temperature melt was adopted to measure the l resistivity of In–Bi system melts at different temperatures. It can be concluded from the analysis and calculation of the experimental results that the resistivity of In x Bi 100−x (x = 0–100) melt is in linear relationship with temperature within the experiment temperature range. The resistivity of the melt decreases with the increasing content of In. The fair consistency of resistivity of In–Bi system melt is found in the heating and cooling processes. On the basis of Novakovic's assumption, we approximately estimated the content of InBi atom clusters in In x Bi 100−x melts with the resistivity data by equation ρ ≈ ρ InBi x InBi + ρ m (1 − x InBi ). In the whole components interval, the content corresponds well with the mole fraction of InBi clusters calculated by Novakovic in the thermodynamic approach. The mole fraction of InBi type atom clusters in the melts reaches the maximum at the point of stoichiometric composition In 50 Bi 50 .

MHD PbLi experiments in MaPLE loop at UCLA

International Nuclear Information System (INIS)

Courtessole, C.; Smolentsev, S.; Sketchley, T.; Abdou, M.

2016-01-01

Highlights: • The paper overviews the MaPLE facility at UCLA: one-of-a-few PbLi MHD loop in the world. • We present the progress achieved in development and testing of high-temperature PbLi flow diagnostics. • The most important MHD experiments carried out since the first loop operation in 2011 are summarized. - Abstract: Experiments on magnetohydrodynamic (MHD) flows are critical to understanding complex flow phenomena in ducts of liquid metal blankets, in particular those that utilize eutectic alloy lead–lithium as breeder/coolant, such as self-cooled, dual-coolant and helium-cooled lead–lithium blanket concepts. The primary goal of MHD experiments at UCLA using the liquid metal flow facility called MaPLE (Magnetohydrodynamic PbLi Experiment) is to address important MHD effects, heat transfer and flow materials interactions in blanket-relevant conditions. The paper overviews the one-of-a-kind MaPLE loop at UCLA and presents recent experimental activities, including the development and testing of high-temperature PbLi flow diagnostics and experiments that have been performed since the first loop operation in 2011. We also discuss MaPLE upgrades, which need to be done to substantially expand the experimental capabilities towards a new class of MHD flow phenomena that includes buoyancy effects.

MHD PbLi experiments in MaPLE loop at UCLA

Energy Technology Data Exchange (ETDEWEB)

Courtessole, C., E-mail: cyril@fusion.ucla.edu; Smolentsev, S.; Sketchley, T.; Abdou, M.

2016-11-01

Highlights: • The paper overviews the MaPLE facility at UCLA: one-of-a-few PbLi MHD loop in the world. • We present the progress achieved in development and testing of high-temperature PbLi flow diagnostics. • The most important MHD experiments carried out since the first loop operation in 2011 are summarized. - Abstract: Experiments on magnetohydrodynamic (MHD) flows are critical to understanding complex flow phenomena in ducts of liquid metal blankets, in particular those that utilize eutectic alloy lead–lithium as breeder/coolant, such as self-cooled, dual-coolant and helium-cooled lead–lithium blanket concepts. The primary goal of MHD experiments at UCLA using the liquid metal flow facility called MaPLE (Magnetohydrodynamic PbLi Experiment) is to address important MHD effects, heat transfer and flow materials interactions in blanket-relevant conditions. The paper overviews the one-of-a-kind MaPLE loop at UCLA and presents recent experimental activities, including the development and testing of high-temperature PbLi flow diagnostics and experiments that have been performed since the first loop operation in 2011. We also discuss MaPLE upgrades, which need to be done to substantially expand the experimental capabilities towards a new class of MHD flow phenomena that includes buoyancy effects.

Alpha decay of {sup 181}Pb

Energy Technology Data Exchange (ETDEWEB)

Davids, C.N.; Henderson, D.J.; Hermann, R. [and others

1995-08-01

The {alpha}-decay energy of {sup 181}Pb was measured as 7211(10) keV and 7044(15). In the first study the isotope was produced in {sup 90}Zr bombardments of {sup 94}Mo and, after traversing a velocity filter, implanted in a position-sensitive Si detector; no half life for {sup 181}Pb was reported. In the second study the isotope was produced in {sup 40}Ca bombardments of {sup 144}Sm and transported to a position in front of a Si(Au) surface barrier detector with a fast He-gas-jet capillary system; an estimate of 50 ms was determined for the {sup 181}Pb half life. Recently we investigated {sup 181}Pb {alpha} decay at ATLAS as part of a survey experiment in which a l-pnA beam of 400-MeV {sup 92}Mo was used to irradiate targets of {sup 89}Y, {sup 90,92,94}Zr, and {sup 92}Mo to examine yields for one- and two-nucleon evaporation products from symmetric cold-fusion reactions. Recoiling nuclei of interest were passed through the Fragment Mass Analyzer and implanted in a double-sided silicon strip detector for {alpha}-particle assay. With the {sup 90}Zr target we observed a group at 7065(20) keV which was correlated with A = 181 recoils and had a half life of 45(20) ms. Our new results for {sup 181}Pb therefore agreed with those of the second study. There was no indication in the {sup 90}Zr + {sup 92}Mo data of the 7211(10)-keV {alpha} particles seen by Keller et al. The interested reader is referred to the 1993 atomic mass evaluation wherein the input {alpha}-decay energies and resultant masses of the light Pb isotopes (including {sup 181}Pb) are discussed.

Microstructure and electrochemical corrosion behavior of a Pb-1 wt%Sn alloy for lead-acid battery components

Energy Technology Data Exchange (ETDEWEB)

Peixoto, Leandro C.; Osorio, Wislei R.; Garcia, Amauri [Department of Materials Engineering, University of Campinas - UNICAMP, PO Box 612, 13083-970, Campinas - SP (Brazil)

2009-07-15

The aim of this study was to evaluate the effect of solidification cooling rates on the as-cast microstructural morphologies of a Pb-1 wt%Sn alloy, and to correlate the resulting microstructure with the corresponding electrochemical corrosion resistance in a 0.5 M H{sub 2}SO{sub 4} solution at 25 C. Cylindrical low-carbon steel and insulating molds were employed permitting the two extremes of a significant range of solidification cooling rates to be experimentally examined. Electrochemical impedance spectroscopy (EIS) diagrams, potentiodynamic polarization curves and an equivalent circuit analysis were used to evaluate the electrochemical corrosion response of Pb-1 wt%Sn alloy samples. It was found that lower cooling rates are associated with coarse cellular arrays which result in better corrosion resistance than fine cells which are related to high cooling rates. The experimental results have shown that that the pre-programming of microstructure cell size of Pb-Sn alloys can be used as an alternative way to produce as-cast components of lead-acid batteries with higher corrosion resistance. (author)

Magnetic order of Nd5Pb3 single crystals

Science.gov (United States)

Yan, J.-Q.; Ochi, M.; Cao, H. B.; Saparov, B.; Cheng, J.-G.; Uwatoko, Y.; Arita, R.; Sales, B. C.; Mandrus, D. G.

2018-04-01

We report millimeter-sized Nd5Pb3 single crystals grown out of a Nd-Co flux. We experimentally study the magnetic order of Nd5Pb3 single crystals by measuring the anisotropic magnetic properties, electrical resistivity under high pressure up to 8 GPa, specific heat, and neutron single crystal diffraction. Two successive magnetic orders are observed at T N1  =  44 K and T N2  =  8 K. The magnetic cells can be described with a propagation vector k=(0.5, 0, 0) . Cooling below T N1, Nd1 and Nd3 order forming ferromagnetic stripes along the b-axis, and the ferromagnetic stripes are coupled antiferromagnetically along the a-axis for the k=(0.5, 0, 0) magnetic domain. Cooling below T N2, Nd2 orders antiferromagnetically to nearby Nd3 ions. All ordered moments align along the crystallographic c-axis. The magnetic order at T N1 is accompanied by a quick drop of electrical resistivity upon cooling and a lambda-type anomaly in the temperature dependence of specific heat. At T N2, no anomaly was observed in electrical resistivity but there is a weak feature in specific heat. The resistivity measurements under hydrostatic pressures up to 8 GPa suggest a possible phase transition around 6 GPa. Our first-principles band structure calculations show that Nd5Pb3 has the same electronic structure as does Y5Si3 which has been reported to be a one-dimensional electride with anionic electrons that do not belong to any atom. Our study suggests that R 5Pb3 (R  =  rare earth) can be a materials playground for the study of magnetic electrides. This deserves further study after experimental confirmation of the presence of anionic electrons.

Electrochemical corrosion of Pb-1 wt% Sn and Pb-2.5 wt% Sn alloys for lead-acid battery applications

Energy Technology Data Exchange (ETDEWEB)

Osorio, Wislei R.; Peixoto, Leandro C.; Garcia, Amauri [Department of Materials Engineering, State University of Campinas - UNICAMP, PO Box 612, 13083-970 Campinas, SP (Brazil)

2009-12-01

The aim of this study was to compare the electrochemical corrosion behavior of as-cast Pb-1 wt% Sn and Pb-2.5 wt% Sn alloy samples in a 0.5 M H{sub 2}SO{sub 4} solution at 25 C. A water-cooled unidirectional solidification system was used to obtain the as-cast samples. Electrochemical impedance spectroscopy (EIS) diagrams, potentiodynamic polarization curves and an equivalent circuit analysis were used to evaluate the electrochemical corrosion response. It was found that a coarse cellular array has a better electrochemical corrosion resistance than fine cells. The pre-programming of microstructure cell size of Pb-Sn alloys can be used as an alternative way to produce as-cast components of lead-acid batteries with higher corrosion resistance associated with environmental and economical aspects. (author)

Mechanical and fatigue properties of martensitic Fe-13Cr steel in contact with lead and lead-bismuth melts

Energy Technology Data Exchange (ETDEWEB)

Yaskiv, O.I., E-mail: oleh.yaskiv@ipm.lviv.ua; Fedirko, V.M.

2014-01-15

Highlights: •We investigated the influence of Pb and Pb-Bi melts on mechanical properties of Fe-13Cr steel at high temperatures. •We revealed the temperature interval of liquid metal embrittlement of Fe-13Cr steel. •Pb-Bi has more negative impact as compared with Pb for both plasticity and fatigue. -- Abstract: The influence of stagnant liquid-metal environments (Pb and Pb-Bi) on mechanical (strength and plasticity) and fatigue properties (low cycle fatigue) of martensitic Fe-13Cr steel in temperature interval of 250–600 °S have been investigated. Heavy liquid metals facilitate decreasing in ultimate strength by 10–20% against that in vacuum. The increase of temperature enhances this effect. Fe-13Cr steel is susceptible to liquid-metal embrittlement in the temperature interval of 350–450 °S, which manifests itself more substantially in lead-bismuth eutectic. The decrease of plasticity in Pb is 11% at 450 °S and in Pb-Bi is 30% in temperature interval 350–400 °S. Liquid metal environments significantly reduce fatigue life of Fe-13Cr steel. Pb-Bi has a more negative impact. In particular, with increasing total strain amplitude (up to 1.0%), the decrease in the cycle number to fracture by more than two orders of magnitude occurs.

Texturation à froid sous contraintes triaxiales de phase à haute T_c de Bi(Pb)SrCaCuO préréagie

Science.gov (United States)

Langlois, P.; Massat, H.; Suryanarayanan, R.

1994-11-01

The alignment of grains in isostatically precompacted samples of prereacted Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} powder has been achieved by compressive plastic deformation under isostatic pressure at room temperature. Isostatic pressures were in the range 0.1 to 1 GPa and deformation rates were led up to 57 %. Prior to sintering, X-ray diffraction measurements corroborate an expected high- T_c phase purity of nearly 85 % and indicate that the as-deformed samples have been textured with the (c-axes parallel to the pressing direction whilst a.c. susceptibility measurements ascertain a high transition temperature around 107 K. Intergranular connection does not occur until sintering at 850 ^{circ}C for 80 h and measurements indicate then that the texture has been retained. Superconducting properties themselves show sensitivity to texture through anisotropy-related distinctive irreversibility lines. L'alignement de grains de poudre Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} préréagie a été réalisé par déformation plastique à température ambiante d'échantillons précompactés isostatiquement et comprimés sous pression isostatique, la gamme des pressions isostatiques allant de 0,1 à 1 GPa et les taux de déformation atteignant 57 %. Les mesures de diffraction de rayons X corroborent la pureté de phase à haute T_c proche de 85 % attendue et indiquent que les échantillons ainsi déformés ont été texturés avec les plans ab perpendiculaires à la direction de compression. Les mesures de susceptibilité alternative avèrent une température élevée de transition à environ 107 K mais la connexion intergranulaire n'est assurée qu'après un frittage à 850 ^{circ}C pendant 80 h dont on vérifie qu'il conserve la texture. Enfin, la sensibilité des propriétés supraconductrices à la texturation est évaluée par le biais de lignes d'irréversibilité distinctes en fonction de l'anisotropie.

U-Pb Data On Apatites With Common Lead Correction : Exemples From The Scottish Caledonides

Science.gov (United States)

Jewison, E.; Deloule, E.; Villeneuve, J.; Bellahsen, N.; Labrousse, L.; Rosenberg, C.; Pik, R.; Chew, D.

2017-12-01

Apatite is a widely used mineral in low-temperature thermochronology (U-Th/He and AFT). The use of apatite in U-Pb geochronology has a great potential, given its closure temperature around 450°C, for orogen thermostructural evolution studies. However, since apatite can accumulate significant amount of initial Pb in its structure, its use can be hindered by the lack of 204 Pb estimations. To work around this, two options are commonly used : either use a ploting sytem that does not require corrected ratios, or use a proxy to estimate 204Pb and use it to correct the ratios. In this study we use a SIMS to mesure 204Pb in order to compare Tera-Wasserburg diagram and corrected ages to examine the cooling pattern in the northern Highlands of Scotland. The Highlands is an extensively studied caledonian collision wedge which results from the closure of the Iapétus Ocean during the Orodivician-Silurian. Two orogenic events are related to this closing, the grampian event (480-460Ma) and the scandian event (435-415 Ma) that culminated in the stacking of major ductile thrusts. The thermal history of thoses nappes are hence complex and the cooling pattern poorly constrained. Corrected apatite U-Pb ages provide new constrains on ductile wedge building and improve our understanding of mid to lower-crustal deformation and orogenic exhumation. Thoses corrected ages yield equivalent errors and mean ages from the classic method. Those data suggest a global cooling younger than previously thought and a sequence departing from a simple forward sequence. We thus present a refined thermal evolution and conceptualize a model of ductile wedge evolution.

An investigation of TRU recycling with various neutron spectrums

International Nuclear Information System (INIS)

Yong-Nam, Kim; Hong-Chul, Kim; Chi-Young, Han; Jong-Kyung, Kim; Won-Seok Park

2003-01-01

This study is intended to evaluate the dependency of TRU recycling characteristics on the neutron spectrum shift in a Pb-Bi cooled core. Considering two Pb-Bi cooled cores with the soft and the hard spectrum, respectively, various characteristics of the recycled core are carefully examined and compared with each other. Assuming very simplified fuel cycle management with the homogeneous and single batch fuel loading, the burn-up calculations are performed until the recycled core reached to the (quasi-) equilibrium state. The mechanism of TRU recycling toward the equilibrium is analysed in terms of burn-up reactivity and the isotopic compositions of TRU fuel. In the comparative analyses, the difference in the recycling behaviour between the two cores is clarified. In addition, the basic safety characteristics of the recycled core are also discussed in terms of the Doppler coefficient, the coolant loss reactivity coefficient, and the effective delayed neutron fraction. (author)

Magnetic properties of Eu doped BiGdO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Nithya, R., E-mail: nithya@igcar.gov.in; Yadagiri, K. [Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603 102, TN (India); Shukla, Neeraj [UGC-DAE-CSR Kalpakkam Node, Kokilamedu-603 104, TN (India)

2016-05-23

Bulk Bismuth Gadolinium Oxide, BiGdO{sub 3} and Eu doped BiGdO{sub 3} compounds were synthesized by the conventional solid state reaction in air. Phase formation of these compounds was tracked using powder X-ray characterization technique since single phase formation was found to be sensitive to thermal treatment parameters such as cooling and heating rates. Analysis of X-ray diffraction patterns revealed cubic structure with Pm-3m symmetry. An antiferromagnetic transition around 3.8 K was observed in the pristine compound whereas doped samples showed paramagnetic nature in the whole measured temperature range.

Fast infrared array spectrometer with a thermoelectrically cooled 160-element PbSe detector

International Nuclear Information System (INIS)

Ji Jun; Gore, Jay P.; Sivathanu, Yudaya R.; Lim, Jongmook

2004-01-01

A fast infrared array spectrometer (FIAS) with a thermoelectrically cooled 160-element PbSe detector was demonstrated using measurements of instantaneous infrared radiation intensities simultaneously over the 1.8-4.9 μm wavelength range at a sampling rate of 390 Hz. A three-point second-degree Lagrange interpolation polynomial was constructed to calibrate the FIAS because of the nonlinear response of the infrared array detector to the incident radiation beam. This calibration method gave excellent measurements of blackbody radiation spectra except for a narrow band at wavelength of 4.3 μm due to absorption by room carbon dioxide, which is one of the two major gas radiation peaks (2.7 and 4.3 μm) from the lean premixed hydrocarbon/air combustion products in the midinfrared spectrum. Therefore, the absorption coefficient of room carbon dioxide was conveniently measured on site with the blackbody reference source, and was used in the calibration of the FIAS and also in the calculations of the radiation spectra. Blackbody tests showed that this procedure was effective in correcting for the room carbon dioxide absorption in the radiation spectra measured by the FIAS. For an example of its application, the calibrated FIAS was used to measure spectral radiation intensities from three lean premixed laminar flames and a premixed turbulent jet flame for which reference data with a grating spectrometer were available for comparison. The agreement between the FIAS measurements and the reference data was excellent

Search for negative U in the Ba1-xKxBi1-yPbyO3 system using constrained density-functional theory

International Nuclear Information System (INIS)

Vielsack, G.; Weber, W.

1996-01-01

Calculations using constrained density-functional theory have been carried out for the Ba 1-x K x Bi 1-y Pb y O 3 system, using a full-potential linearized-augmented-plane-wave method and employing fcc supercell geometries with two formula units. The results have been mapped onto Hubbard-type models in order to extract values of interaction parameters U at the Bi sites. Two different mapping procedures have been utilized. The first one is the standard method, based on the comparison of total-energy curvatures. The second method, proposed in the present work, relies on the analysis of single particle energies and yields much smaller numerical errors. For BaBiO 3 interaction parameters are obtained for the following models: (i) s and p orbitals at Bi and p orbitals at O sites. Here, U s =3.1±0.4 eV, U sp =1.4±0.2 eV, U p =2.2±0.4 eV are found, (ii) s(Bi) and p(O) orbitals, yielding U s =1.9±0.7 eV, and (iii) an effective one-band model, leading to U s =0.6±0.4 eV. Further studies have been performed for breathing distorted BaBiO 3 and for various Ba 1-x K x Bi 1-y Pb y O 3 alloys using virtual crystal approximations. The resulting U values are somewhat larger than for pure BaBiO 3 . Thus, in all cases, the values of Bi U parameters are found to be positive. There is no indication of a negative U of electronic origin. copyright 1996 The American Physical Society

The neutronic performance of solid-target alternatives for SINQ

International Nuclear Information System (INIS)

Atchison, F.

1991-01-01

The results from calculations of the neutronic performance of three possible 'solid' targets and that of the current version of the liquid Pb-Bi target are presented. Two are 'conventional' transverse cooled plate structures, one using tantalum, the other tungsten. The third is a Pb-shot based pebble-bed design. Some general results on the effect of neutron absorption on the performance of the Pebble-bed target are given. (author)

Decay studies of a long lived high spin isomer of 210Bi

International Nuclear Information System (INIS)

Tuggle, D.G.

1976-08-01

A source of approximately 30 μg of pure (> 90%) /sup 210m/Bi (Jπ = 9-) was prepared by irradiating 209 Bi in a nuclear reactor. After chemical separations to remove 210 Po from the irradiated bismuth sample were completed, the 210 Bi was electromagnetically separated from the 209 Bi by a series of two isotope separations to create the source mentioned above. This source was then used to conduct alpha, conversion electron, gamma, gamma-gamma coincidence, and alpha-gamma coincidence spectroscopic studies of the decay of /sup 210m/Bi. The partial half life for the alpha decay of /sup 210m/Bi was measured as 3.0 x 10 6 yr. A lower limit of 10 13 years was set for the partial half life for the decay of /sup 210m/Bi to 210 Po. Alpha decay of /sup 210m/Bi to 8 excited states of 206 Tl was observed. A lower limit of 10 -4 % was set for the branching ratio of the parity forbidden alpha decay of 210 Bi to the 206 Ti ground state. Theoretical decay rates for the alpha decays of /sup 210m/Bi, 210 Bi, 211 Po, and /sup 211m/Po were calculated using the method developed by Hans Mang. A comparison of the calculated and experimentally measured alpha decay rates of /sup 210m/Bi showed good agreement for the relative alpha decay rates

Enhanced Continental Weathering on Antarctica During the Mid Miocene Climatic Optima Based on Pb Isotopes

Science.gov (United States)

Martin, E. E.; Fenn, C.; Basak, C.

2012-12-01

Feedbacks between climate and continental weathering can be monitored over geologic time scales using Pb isotopes preserved in marine sediments. During chemical weathering, radiogenic Pb is preferentially released to the dissolved phase, producing weathering solutions with more radiogenic isotopic values than the parent rock. The offset between the composition of the solution and rock tend to increase with the intensity of incongruent weathering (von Blanckenburg and Nägler, 2001; Harlavan and Erel, 2002). The seawater isotopic signal extracted from Fe-Mn oxides on bulk marine sediments is interpreted to represent the composition of local dissolved weathering inputs. For example, increasing seawater Pb isotopes observed during the most recent deglaciation are believed to reflect enhanced weathering of newly exposed glacial rock flour under warm conditions (Foster and Vance, 2006; Kurzweil et al., 2010). For this study we evaluated Nd and Pb isotopes from both the seawater fraction (extracted from Fe-Mn oxides) and parent rock (the detrital fraction of marine sediment) during the Mid-Miocene Climatic Optimum (MMCO) and subsequent cooling and East Antarctic Ice Sheet (EAIS) expansion (18 to 8 Ma) from Ocean Drilling Program site 744 on Kerguelen Plateau (2300 m; Indian sector) and sites 689 and 690 on Maud Rise (2080 m and 2914 m; Atlantic sector). The absolute value of seawater 206Pb/204Pb and separation between values for seawater and detrital fractions increased during the MMCO, suggesting enhanced weathering in proglacial and deglaciated areas exposed by ice sheet meltback during the warm interval. During the ensuing cooling, seawater values and the offset between the two archives decreased. Similar trends are displayed by 207Pb/204Pb and 208Pb/204Pb, although 207Pb/204Pb detrital values tend to be higher than seawater values. Reconstructions of atmospheric pCO2 in the Miocene have suggested both 1) decoupling between pCO2 and climate with consistently low

Visible-light CO{sub 2} photocatalytic reduction performance of ball-flower-like Bi{sub 2}WO{sub 6} synthesized without organic precursor: Effect of post-calcination and water vapor