Software architecture for control and data acquisition of linear plasma generator Magnum-PSI

International Nuclear Information System (INIS)

Groen, P.W.C.; Beveren, V. van; Broekema, A.; Busch, P.J.; Genuit, J.W.; Kaas, G.; Poelman, A.J.; Scholten, J.; Zeijlmans van Emmichoven, P.A.

2013-01-01

Highlights: ► An architecture based on a modular design. ► The design offers flexibility and extendability. ► The design covers the overall software architecture. ► It also covers its (sub)systems’ internal structure. -- Abstract: The FOM Institute DIFFER – Dutch Institute for Fundamental Energy Research has completed the construction phase of Magnum-PSI, a magnetized, steady-state, large area, high-flux linear plasma beam generator to study plasma surface interactions under ITER divertor conditions. Magnum-PSI consists of several hardware subsystems, and a variety of diagnostic systems. The COntrol, Data Acquisition and Communication (CODAC) system integrates these subsystems and provides a complete interface for the Magnum-PSI users. Integrating it all, from the lowest hardware level of sensors and actuators, via the level of networked PLCs and computer systems, up to functions and classes in programming languages, demands a sound and modular software architecture, which is extendable and scalable for future changes. This paper describes this architecture, and the modular design of the software subsystems. The design is implemented in the CODAC system at the level of services and subsystems (the overall software architecture), as well as internally in the software subsystems

Pushouts in software architecture design

OpenAIRE

Riché, T. L.; Gonçalves, Rui; Marker, B.; Batory, D.

2012-01-01

A classical approach to program derivation is to progressively extend a simple specification and then incrementally refine it to an implementation. We claim this approach is hard or impractical when reverse engineering legacy software architectures. We present a case study that shows optimizations and pushouts--in addition to refinements and extensions--are essential for practical stepwise development of complex software architectures. NSF CCF 0724979 NSF CNS 0509338 NSF CCF 0917167 ...

Ragnarok: An Architecture Based Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

of the development process. The main contributions presented in the thesis have evolved from work with two of the hypotheses: These address the problems of management of evolution, and overview, comprehension and navigation respectively. The first main contribution is the Architectural Software Configuration...... Management Model: A software configuration management model where the abstractions and hierarchy of the logical aspect of software architecture forms the basis for version control and configuration management. The second main contribution is the Geographic Space Architecture Visualisation Model......: A visualisation model where entities in a software architecture are organised geographically in a two-dimensional plane, their visual appearance determined by processing a subset of the data in the entities, and interaction with the project's underlying data performed by direct manipulation of the landscape...

Toward Measures for Software Architectures

National Research Council Canada - National Science Library

Chastek, Gary; Ferguson, Robert

2006-01-01

.... Defining these architectural measures is very difficult. The software architecture deeply affects subsequent development and project management decisions, such as the breakdown of the coding tasks and the definition of the development increments...

The Software Architecture of Global Climate Models

Science.gov (United States)

Alexander, K. A.; Easterbrook, S. M.

2011-12-01

It has become common to compare and contrast the output of multiple global climate models (GCMs), such as in the Climate Model Intercomparison Project Phase 5 (CMIP5). However, intercomparisons of the software architecture of GCMs are almost nonexistent. In this qualitative study of seven GCMs from Canada, the United States, and Europe, we attempt to fill this gap in research. We describe the various representations of the climate system as computer programs, and account for architectural differences between models. Most GCMs now practice component-based software engineering, where Earth system components (such as the atmosphere or land surface) are present as highly encapsulated sub-models. This architecture facilitates a mix-and-match approach to climate modelling that allows for convenient sharing of model components between institutions, but it also leads to difficulty when choosing where to draw the lines between systems that are not encapsulated in the real world, such as sea ice. We also examine different styles of couplers in GCMs, which manage interaction and data flow between components. Finally, we pay particular attention to the varying levels of complexity in GCMs, both between and within models. Many GCMs have some components that are significantly more complex than others, a phenomenon which can be explained by the respective institution's research goals as well as the origin of the model components. In conclusion, although some features of software architecture have been adopted by every GCM we examined, other features show a wide range of different design choices and strategies. These architectural differences may provide new insights into variability and spread between models.

Model-centric software architecture reconstruction

NARCIS (Netherlands)

Stoermer, C.; Rowe, A.; O'Brien, L.; Verhoef, C.

2006-01-01

Much progress has been achieved in defining methods, techniques, and tools for software architecture reconstruction (SAR). However, less progress has been achieved in constructing reasoning frameworks from existing systems that support organizations in architecture analysis and design decisions.

Using Software Architectures for Designing Distributed Embedded Systems

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

In this paper, we outline an on-going project of designing distributed embedded systems for closed-loop process control. The project is a joint effort between software architecture researchers and developers from two companies that produce commercial embedded process control systems. The project...... has a strong emphasis on software architectural issues and terminology in order to envision, design and analyze design alternatives. We present two results. First, we outline how focusing on software architecture, architectural issues and qualities are beneficial in designing distributed, embedded......, systems. Second, we present two different architectures for closed-loop process control and discuss benefits and reliabilities....

Software Architecture Coupling Metric for Assessing Operational Responsiveness of Trading Systems

Directory of Open Access Journals (Sweden)

Claudiu VINTE

2012-01-01

Full Text Available The empirical observation that motivates our research relies on the difficulty to assess the performance of a trading architecture beyond a few synthetic indicators like response time, system latency, availability or volume capacity. Trading systems involve complex software architectures of distributed resources. However, in the context of a large brokerage firm, which offers a global coverage from both, market and client perspectives, the term distributed gains a critical significance indeed. Offering a low latency ordering system by nowadays standards is relatively easily achievable, but integrating it in a flexible manner within the broader information system architecture of a broker/dealer requires operational aspects to be factored in. We propose a metric for measuring the coupling level within software architecture, and employ it to identify architectural designs that can offer a higher level of operational responsiveness, which ultimately would raise the overall real-world performance of a trading system.

Terra Harvest software architecture

Science.gov (United States)

Humeniuk, Dave; Klawon, Kevin

2012-06-01

Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

How Do Open Source Communities Document Software Architecture: An Exploratory Survey

NARCIS (Netherlands)

Ding, W.; Liang, P.; Tang, A.; Van Vliet, H.; Shahin, M.

2014-01-01

Software architecture (SA) documentation provides a blueprint of a software-intensive system for the communication between stakeholders about the high-level design of the system. In open source software (OSS) development, a lack of SA documentation may hinder the use and further development of OSS,

Software architecture as a set of architectural design decisions

NARCIS (Netherlands)

Jansen, Anton; Bosch, Jan; Nord, R; Medvidovic, N; Krikhaar, R; Khrhaar, R; Stafford, J; Bosch, J

2006-01-01

Software architectures have high costs for change, are complex, and erode during evolution. We believe these problems are partially due to knowledge vaporization. Currently, almost all the knowledge and information about the design decisions the architecture is based on are implicitly embedded in

Architecture design of the application software for the low-level RF control system of the free-electron laser at Hamburg

International Nuclear Information System (INIS)

Geng, Z.; Ayvazyan, V.; Simrock, S.

2012-01-01

The superconducting linear accelerator of the Free-Electron Laser at Hamburg (FLASH) provides high performance electron beams to the lasing system to generate synchrotron radiation to various users. The Low-Level RF (LLRF) system is used to maintain the beam stabilities by stabilizing the RF field in the superconducting cavities with feedback and feed forward algorithms. The LLRF applications are sets of software to perform RF system model identification, control parameters optimization, exception detection and handling, so as to improve the precision, robustness and operability of the LLRF system. In order to implement the LLRF applications in the hardware with multiple distributed processors, an optimized architecture of the software is required for good understandability, maintainability and extendibility. This paper presents the design of the LLRF application software architecture based on the software engineering approach for FLASH. (authors)

Architecture-driven Migration of Legacy Systems to Cloud-enabled Software

DEFF Research Database (Denmark)

Ahmad, Aakash; Babar, Muhammad Ali

2014-01-01

of legacy systems to cloud computing. The framework leverages the software reengineering concepts that aim to recover the architecture from legacy source code. Then the framework exploits the software evolution concepts to support architecture-driven migration of legacy systems to cloud-based architectures....... The Legacy-to-Cloud Migration Horseshoe comprises of four processes: (i) architecture migration planning, (ii) architecture recovery and consistency, (iii) architecture transformation and (iv) architecture-based development of cloud-enabled software. We aim to discover, document and apply the migration...

Self-Contained Cross-Cutting Pipeline Software Architecture

OpenAIRE

Patwardhan, Amol; Patwardhan, Rahul; Vartak, Sumalini

2016-01-01

Layered software architecture contains several intra-layer and inter-layer dependencies. Each layer depends on shared components making it difficult to release a code change, bug fix or feature without exhaustive testing and having to build the entire software code base. This paper proposed self-contained, cross-cutting pipeline architecture (SCPA) that is independent of existing layers. We chose 2 open source projects and 3 internal intern projects that used n-tier architecture and applied t...

An Architecture, System Engineering, and Acquisition Approach for Space System Software Resiliency

Science.gov (United States)

Phillips, Dewanne Marie

Software intensive space systems can harbor defects and vulnerabilities that may enable external adversaries or malicious insiders to disrupt or disable system functions, risking mission compromise or loss. Mitigating this risk demands a sustained focus on the security and resiliency of the system architecture including software, hardware, and other components. Robust software engineering practices contribute to the foundation of a resilient system so that the system "can take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". Software resiliency must be a priority and addressed early in the life cycle development to contribute a secure and dependable space system. Those who develop, implement, and operate software intensive space systems must determine the factors and systems engineering practices to address when investing in software resiliency. This dissertation offers methodical approaches for improving space system resiliency through software architecture design, system engineering, increased software security, thereby reducing the risk of latent software defects and vulnerabilities. By providing greater attention to the early life cycle phases of development, we can alter the engineering process to help detect, eliminate, and avoid vulnerabilities before space systems are delivered. To achieve this objective, this dissertation will identify knowledge, techniques, and tools that engineers and managers can utilize to help them recognize how vulnerabilities are produced and discovered so that they can learn to circumvent them in future efforts. We conducted a systematic review of existing architectural practices, standards, security and coding practices, various threats, defects, and vulnerabilities that impact space systems from hundreds of relevant publications and interviews of subject matter experts. We expanded on the system-level body of knowledge for resiliency and identified a new software

The Walk-Man Robot Software Architecture

OpenAIRE

Mirko Ferrati; Alessandro Settimi; Alessandro Settimi; Luca Muratore; Alberto Cardellino; Alessio Rocchi; Enrico Mingo Hoffman; Corrado Pavan; Dimitrios Kanoulas; Nikos G. Tsagarakis; Lorenzo Natale; Lucia Pallottino

2016-01-01

A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot ...

Experiences with Architectural Software Configuration Management in Ragnarok

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

1998-01-01

This paper describes a model, denoted architectural software configuration management, that minimises the gap between software design and configuration management by allowing developers to do configuration- and version control of the abstractions and hierarchy in a software architecture. The model...... emphasises traceability and reproducibility by unifying the concepts version and bound configuration. Experiences with such a model, implemented in a prototype “Ragnarok”, from three real-life, small- to medium-sized, software development projects are reported. The conclusion is that the presented model...

Supporting migration to services using software architecture reconstruction

OpenAIRE

O'Brien, Liam; Smith, Dennis; Lewis, Grace

2005-01-01

peer-reviewed There are many good reasons why organizations should perform software architecture reconstructions. However, few organizations are willing to pay for the effort. Software architecture reconstruction must be viewed not as an effort on its own but as a contribution in a broader technical context, such as the streamlining of products into a product line or the modernization of systems that hit their architectural borders, that is require major restructuring. In this paper we ...

A Systematic Review of Software Architecture Visualization Techniques

NARCIS (Netherlands)

Shahin, M.; Liang, P.; Ali Babar, M.

2014-01-01

Context Given the increased interest in using visualization techniques (VTs) to help communicate and understand software architecture (SA) of large scale complex systems, several VTs and tools have been reported to represent architectural elements (such as architecture design, architectural

Towards reference architectures as an enabler for software ecosystems

DEFF Research Database (Denmark)

Knodel, Jens; Manikas, Konstantinos

2016-01-01

Software ecosystems - a topic with increasingly growing interest in academia and industry in the past decade - arguably revolutionized many aspects of industrial software engineering (business models, architectures, platforms, project executions, collaboration models, distribution of assets......, to name a few). Software ecosystems enable the contribution of external actors with distinct center a common technology and the potential distribution of the actor contributions to an existing user set. Reference architectures have been proven successful and beneficial for software product lines...... and traditional software development within distinct domains. They arguably come with a set of benefits that severely counterweights the additional effort of design and implementation. But what is the role of reference architectures in an ecosystem setting? In this position paper, we argue for the use...

COG Software Architecture Design Description Document

International Nuclear Information System (INIS)

Buck, R.M.; Lent, E.M.

2009-01-01

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Software Communications Architecture (SCA) Compliant Software Defined Radio Design for IEEE 802.16 Wirelessman-OFDMTM Transceiver

National Research Council Canada - National Science Library

Kian, Low W

2006-01-01

.... Several SDR software architectures have been developed during the last few years. One implementation of the Software Communications Architecture is the Open Source SCA Implementation::Embedded (OSSIE...

Change Impact Analysis of Crosscutting in Software Architectural Design

NARCIS (Netherlands)

van den Berg, Klaas

2006-01-01

Software architectures should be amenable to changes in user requirements and implementation technology. The analysis of the impact of these changes can be based on traceability of architectural design elements. Design elements have dependencies with other software artifacts but also evolve in time.

Metric-based Evaluation of Implemented Software Architectures

NARCIS (Netherlands)

Bouwers, E.M.

2013-01-01

Software systems make up an important part of our daily lives. Just like all man- made objects, the possibilities of a software system are constrained by the choices made during its creation. The complete set of these choices can be referred to as the software architecture of a system. Since the

Architecture independent environment for developing engineering software on MIMD computers

Science.gov (United States)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

On Converting Software Systems to Object Oriented Architectures

Directory of Open Access Journals (Sweden)

Gabriela Czibula

2010-06-01

Full Text Available Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs. Moreover, it would be useful to assist by automatic methods the software developers in transforming procedural code into an equivalent
object-oriented one. In this paper we aim at introducing a hierarchical clustering algorithm that can be used for assisting software developers in the process of transforming procedural code into an object-oriented architecture.

Software architecture and engineering for patient records: current and future.

Science.gov (United States)

Weng, Chunhua; Levine, Betty A; Mun, Seong K

2009-05-01

During the "The National Forum on the Future of the Defense Health Information System," a track focusing on "Systems Architecture and Software Engineering" included eight presenters. These presenters identified three key areas of interest in this field, which include the need for open enterprise architecture and a federated database design, net centrality based on service-oriented architecture, and the need for focus on software usability and reusability. The eight panelists provided recommendations related to the suitability of service-oriented architecture and the enabling technologies of grid computing and Web 2.0 for building health services research centers and federated data warehouses to facilitate large-scale collaborative health care and research. Finally, they discussed the need to leverage industry best practices for software engineering to facilitate rapid software development, testing, and deployment.

A software architecture for a transportation control tower

NARCIS (Netherlands)

Baumgrass, A.; Dijkman, R.M.; Grefen, P.W.P.J.; Pourmirza, S.; Völzer, H.; Weske, M.H.

2014-01-01

A Transportation Control Tower is a software application that facilitates transportation planners with easily monitoring and dispatching transportation resources. This paper presents a software architecture for such an application. It focuses in particular on the novel aspects of the software

The Walk-Man Robot Software Architecture

Directory of Open Access Journals (Sweden)

Mirko Ferrati

2016-05-01

Full Text Available A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot participant at the Darpa Robotics Challenge. The challenge required the robot to execute many different tasks, such as walking, driving a car, and manipulating objects. These tasks need to be solved by robotics specialists in their corresponding research field, such as humanoid walking, motion planning, or object manipulation. The proposed architecture was developed in 10 months, provided boilerplate code for most of the functionalities required to control a humanoid robot and allowed robotics researchers to produce their control modules for DRC tasks in a short time. Additional capabilities of the architecture include firmware and hardware management, mixing of different middlewares, unreliable network management, and operator control station GUI. All the source code related to the architecture and some control modules have been released as open source projects.

An empirical study of software architectures' effect on product quality

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Jonasson, Kristjan; Neukirchen, Helmut

2011-01-01

Software architectures shift the focus of developers from lines-of-code to coarser-grained components and their interconnection structure. Unlike 2ne-grained objects, these components typically encompass business functionality and need to be aware of the underlying business processes. Hence......, the interface of a component should re4ect relevant parts of the business process and the software architecture should emphasize the coordination among components. To shed light on these issues, we provide a framework for component-based software architectures focusing on the process perspective. The interface...

Improving Software Performance in the Compute Unified Device Architecture

Directory of Open Access Journals (Sweden)

Alexandru PIRJAN

2010-01-01

Full Text Available This paper analyzes several aspects regarding the improvement of software performance for applications written in the Compute Unified Device Architecture CUDA. We address an issue of great importance when programming a CUDA application: the Graphics Processing Unit’s (GPU’s memory management through ranspose ernels. We also benchmark and evaluate the performance for progressively optimizing a transposing matrix application in CUDA. One particular interest was to research how well the optimization techniques, applied to software application written in CUDA, scale to the latest generation of general-purpose graphic processors units (GPGPU, like the Fermi architecture implemented in the GTX480 and the previous architecture implemented in GTX280. Lately, there has been a lot of interest in the literature for this type of optimization analysis, but none of the works so far (to our best knowledge tried to validate if the optimizations can apply to a GPU from the latest Fermi architecture and how well does the Fermi architecture scale to these software performance improving techniques.

Business engineering. Generic Software Architecture in an Object Oriented View

Directory of Open Access Journals (Sweden)

Mihaela MURESAN

2006-01-01

Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

Ready! Set! Go! An Action Research Agenda for Software Architecture

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius; Schougaard, Kari Rye

2008-01-01

Software architecture practice is highly complex. Software architects interact with business as well as technical aspects of systems, often embedded in large and changing organizations. We first make an argument that an appropriate research agenda for understanding, describing, and changing...... architectural practice in this context is based on an action research agenda in which researchers use ethnographic techniques to understand practice and engages directly with and in practice when proposing and designing new practices. Secondly, we present an overview of an ongoing project which applies action...... research techniques to understand and potentially change architectural practice in four Danish software companies....

A Process Framework for Designing Software Reference Architectures for Providing Tools as a Service

DEFF Research Database (Denmark)

Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Probst, Christian W.

2016-01-01

of software systems need customized and systematic SRA design and evaluation methods. In this paper, we present a software Reference Architecture Design process Framework (RADeF) that can be used for analysis, design and evaluation of the SRA for provisioning of Tools as a Service as part of a cloud......Software Reference Architecture (SRA), which is a generic architecture solution for a specific type of software systems, provides foundation for the design of concrete architectures in terms of architecture design guidelines and architecture elements. The complexity and size of certain types......-enabled workSPACE (TSPACE). The framework is based on the state of the art results from literature and our experiences with designing software architectures for cloud-based systems. We have applied RADeF SRA design two types of TSPACE: software architecting TSPACE and software implementation TSPACE...

Extensive Evaluation of Using a Game Project in a Software Architecture Course

Science.gov (United States)

Wang, Alf Inge

2011-01-01

This article describes an extensive evaluation of introducing a game project to a software architecture course. In this project, university students have to construct and design a type of software architecture, evaluate the architecture, implement an application based on the architecture, and test this implementation. In previous years, the domain…

BENEFITS OF USING SOFTWARE WITH SIK COMPLIANT ARCHITECTURE IN CLOUD

OpenAIRE

Vasile AVRAM

2010-01-01

The aim of this paper is to investigate the main benefits that can be obtained by using a SIK (software inherited knowledge) compliant architecture for cloud services and support software used to build, administer and maintaining the cloud. It introduces the basic building blocks for cloud computing together with the main categories of cloud services. For the SIK architecture, shown in connection with a semantic-web application architecture, are introduced the main functionalities. The paper ...

Introduction to adoption of lean canvas in software test architecture design

Directory of Open Access Journals (Sweden)

Padmaraj Nidagundi

2017-01-01

Full Text Available The growth of the software dependent businesses, as well as the use of electronic devices in daily life, brings new challenges requiring the software to work error free all the time, to achieve this goal software needs to be sufficiently and effectively tested during various development phases. Most software development companies make great efforts in testing; it is even more difficult to reach the error-free software goal. Different software development methodologies (e.g. traditional waterfall, agile brought in a new dimension for both - development and testing - introducing new technologies and tools. In software test automation the test architecture design plays a key role in managing written test cases and effectively executing them. Having the more effective software test automation architecture design in test process saves resources, efforts and reduces the technical depth. This paper provides the new dimension and possibilities of using lean canvas in the design of the software test architecture.

A Cooperative Coevolution Approach to Automate Pattern-based Software Architectural Synthesis

NARCIS (Netherlands)

Xu, Y.R.; Liang, P.

2014-01-01

To reuse successful experience in software architecture design, architects use architectural patterns as reusable architectural knowledge for architectural synthesis. However, it has been observed that the resulting architecture does not always conform to the initial architectural patterns employed.

Architecture design in global and model-centric software development

NARCIS (Netherlands)

Heijstek, Werner

2012-01-01

This doctoral dissertation describes a series of empirical investigations into representation, dissemination and coordination of software architecture design in the context of global software development. A particular focus is placed on model-centric and model-driven software development.

Methods and Software Architecture for Activity Recognition from Position Data

DEFF Research Database (Denmark)

Godsk, Torben

This thesis describes my studies on the subject of recognizing cow activities from satellite based position data. The studies comprise methods and software architecture for activity recognition from position data, applied to cow activity recognition. The development of methods and software....... The results of these calculations are applied to a given standard machine learning algorithm, and the activity, performed by the cow as the measurements were recorded, is recognized. The software architecture integrates these methods and ensures flexible activity recognition. For instance, it is flexible...... in relation to the use of different sensors modalities and/or within different domains. In addition, the methods and their integration with the software architecture ensures both robust and accurate activity recognition. Utilized, it enables me to classify the five activities robustly and with high success...

Open software architecture for east articulated maintenance arm

International Nuclear Information System (INIS)

Wu, Jing; Wu, Huapeng; Song, Yuntao; Li, Ming; Yang, Yang; Alcina, Daniel A.M.

2016-01-01

Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

Open software architecture for east articulated maintenance arm

Energy Technology Data Exchange (ETDEWEB)

Wu, Jing, E-mail: wujing@ipp.ac.cn [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Wu, Huapeng [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Song, Yuntao [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Li, Ming [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Yang, Yang [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Alcina, Daniel A.M. [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland)

2016-11-01

Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

Software architecture standard for simulation virtual machine, version 2.0

Science.gov (United States)

Sturtevant, Robert; Wessale, William

1994-01-01

The Simulation Virtual Machine (SBM) is an Ada architecture which eases the effort involved in the real-time software maintenance and sustaining engineering. The Software Architecture Standard defines the infrastructure which all the simulation models are built from. SVM was developed for and used in the Space Station Verification and Training Facility.

Software Defined Networking (SDN) controlled all optical switching networks with multi-dimensional switching architecture

Science.gov (United States)

Zhao, Yongli; Ji, Yuefeng; Zhang, Jie; Li, Hui; Xiong, Qianjin; Qiu, Shaofeng

2014-08-01

Ultrahigh throughout capacity requirement is challenging the current optical switching nodes with the fast development of data center networks. Pbit/s level all optical switching networks need to be deployed soon, which will cause the high complexity of node architecture. How to control the future network and node equipment together will become a new problem. An enhanced Software Defined Networking (eSDN) control architecture is proposed in the paper, which consists of Provider NOX (P-NOX) and Node NOX (N-NOX). With the cooperation of P-NOX and N-NOX, the flexible control of the entire network can be achieved. All optical switching network testbed has been experimentally demonstrated with efficient control of enhanced Software Defined Networking (eSDN). Pbit/s level all optical switching nodes in the testbed are implemented based on multi-dimensional switching architecture, i.e. multi-level and multi-planar. Due to the space and cost limitation, each optical switching node is only equipped with four input line boxes and four output line boxes respectively. Experimental results are given to verify the performance of our proposed control and switching architecture.

Automated Improvement of Software Architecture Models for Performance and Other Quality Attributes

OpenAIRE

Koziolek, Anne

2013-01-01

Quality attributes, such as performance or reliability, are crucial for the success of a software system and largely influenced by the software architecture. Their quantitative prediction supports systematic, goal-oriented software design and forms a base of an engineering approach to software design. This thesis proposes a method and tool to automatically improve component-based software architecture (CBA) models based on such quantitative quality prediction techniques.

Black-Box Fuzzing of the REDHAWK Software Communications Architecture

OpenAIRE

Sayed, Shereef

2015-01-01

As the complexity of software increases, so does the complexity of software testing. This challenge is especially true for modern military communications as radio functionality becomes more digital than analog. The Software Communications Architecture was introduced to manage the increased complexity of software radios. But the challenge of testing software radios still remains. A common methodology of software testing is the unit test. However, unit testing of software assumes that the ...

Achieving Critical System Survivability Through Software Architectures

National Research Council Canada - National Science Library

Knight, John C; Strunk, Elisabeth A

2006-01-01

.... In a system with a survivability architecture, under adverse conditions such as system damage or software failures, some desirable function will be eliminated but critical services will be retained...

The iCub Software Architecture: evolution and lessons learned

Directory of Open Access Journals (Sweden)

Lorenzo eNatale

2016-04-01

Full Text Available The complexity of humanoid robots is increasing with the availability of new sensors, embedded CPUs and actuators. This wealth of technologies allows researchers to investigate new problems like whole-body force control, multi-modal human-robot interaction and sensory fusion. Under the hood of these robots, the software architecture has an important role: it allows researchers to get access to the robot functionalities focusing primarily on their research problems, it supports code reuse to minimize development and debugging, especially when new hardware becomes available. But more importantly it allows increasing the complexity of the experiments that can be implemented before system integration becomes unmanageable and debugging draws more resources than research itself.In this paper we illustrate the software architecture of the iCub humanoid robot and the software engineering best practices that have emerged driven by the needs of our research community. We describe the latest developments at the level of the middleware supporting interface definition and automatic code generation, logging, ROS compatibility and channel prioritization. We show the robot abstraction layer and how it has been modified to better address the requirements of the users and to support new hardware as it became available. We also describe the testing framework we have recently adopted for developing code using a test driven methodology. We conclude the paper discussing the lessons we have learned during the past eleven years of software development on the iCub humanoid robot.

Analysis and design of software ecosystem architectures – Towards the 4S telemedicine ecosystem

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius; Kyng, Morten

2014-01-01

performed a descriptive, revelatory case study of the Danish telemedicine ecosystem and for ii), we experimentally designed, implemented, and evaluated the architecture of 4S. Results We contribute in three areas. First, we define the software ecosystem architecture concept that captures organization......, and application stove-pipes that inhibit the adoption of telemedical solutions. To which extent can a software ecosystem approach to telemedicine alleviate this? Objective In this article, we define the concept of software ecosystem architecture as the structure(s) of a software ecosystem comprising elements...... experience in creating and evolving the 4S telemedicine ecosystem. Conclusion The concept of software ecosystem architecture can be used analytically and constructively in respectively the analysis and design of software ecosystems....

Measurements of the LHCb software stack on the ARM architecture

International Nuclear Information System (INIS)

Kartik, S Vijay; Couturier, Ben; Clemencic, Marco; Neufeld, Niko

2014-01-01

The ARM architecture is a power-efficient design that is used in most processors in mobile devices all around the world today since they provide reasonable compute performance per watt. The current LHCb software stack is designed (and thus expected) to build and run on machines with the x86/x86 6 4 architecture. This paper outlines the process of measuring the performance of the LHCb software stack on the ARM architecture – specifically, the ARMv7 architecture on Cortex-A9 processors from NVIDIA and on full-fledged ARM servers with chipsets from Calxeda – and makes comparisons with the performance on x86 6 4 architectures on the Intel Xeon L5520/X5650 and AMD Opteron 6272. The paper emphasises the aspects of performance per core with respect to the power drawn by the compute nodes for the given performance – this ensures a fair real-world comparison with much more 'powerful' Intel/AMD processors. The comparisons of these real workloads in the context of LHCb are also complemented with the standard synthetic benchmarks HEPSPEC and Coremark. The pitfalls and solutions for the non-trivial task of porting the source code to build for the ARMv7 instruction set are presented. The specific changes in the build process needed for ARM-specific portions of the software stack are described, to serve as pointers for further attempts taken up by other groups in this direction. Cases where architecture-specific tweaks at the assembler lever (both in ROOT and the LHCb software stack) were needed for a successful compile are detailed – these cases are good indicators of where/how the software stack as well as the build system can be made more portable and multi-arch friendly. The experience gained from the tasks described in this paper are intended to i) assist in making an informed choice about ARM-based server solutions as a feasible low-power alternative to the current compute nodes, and ii) revisit the software design and build system for portability and

A federated design for a neurobiological simulation engine: the CBI federated software architecture.

Directory of Open Access Journals (Sweden)

Hugo Cornelis

Full Text Available Simulator interoperability and extensibility has become a growing requirement in computational biology. To address this, we have developed a federated software architecture. It is federated by its union of independent disparate systems under a single cohesive view, provides interoperability through its capability to communicate, execute programs, or transfer data among different independent applications, and supports extensibility by enabling simulator expansion or enhancement without the need for major changes to system infrastructure. Historically, simulator interoperability has relied on development of declarative markup languages such as the neuron modeling language NeuroML, while simulator extension typically occurred through modification of existing functionality. The software architecture we describe here allows for both these approaches. However, it is designed to support alternative paradigms of interoperability and extensibility through the provision of logical relationships and defined application programming interfaces. They allow any appropriately configured component or software application to be incorporated into a simulator. The architecture defines independent functional modules that run stand-alone. They are arranged in logical layers that naturally correspond to the occurrence of high-level data (biological concepts versus low-level data (numerical values and distinguish data from control functions. The modular nature of the architecture and its independence from a given technology facilitates communication about similar concepts and functions for both users and developers. It provides several advantages for multiple independent contributions to software development. Importantly, these include: (1 Reduction in complexity of individual simulator components when compared to the complexity of a complete simulator, (2 Documentation of individual components in terms of their inputs and outputs, (3 Easy removal or replacement of

Software Reuse in the Naval Open Architecture

National Research Council Canada - National Science Library

Greathouse, Carlus A

2008-01-01

This thesis describes a web-based continuous learning module (CLM) for use in introducing members of the Department of the Navy s acquisition community to software reuse in the context of Naval Open Architecture...

Architecture Level Safety Analyses for Safety-Critical Systems

Directory of Open Access Journals (Sweden)

K. S. Kushal

2017-01-01

Full Text Available The dependency of complex embedded Safety-Critical Systems across Avionics and Aerospace domains on their underlying software and hardware components has gradually increased with progression in time. Such application domain systems are developed based on a complex integrated architecture, which is modular in nature. Engineering practices assured with system safety standards to manage the failure, faulty, and unsafe operational conditions are very much necessary. System safety analyses involve the analysis of complex software architecture of the system, a major aspect in leading to fatal consequences in the behaviour of Safety-Critical Systems, and provide high reliability and dependability factors during their development. In this paper, we propose an architecture fault modeling and the safety analyses approach that will aid in identifying and eliminating the design flaws. The formal foundations of SAE Architecture Analysis & Design Language (AADL augmented with the Error Model Annex (EMV are discussed. The fault propagation, failure behaviour, and the composite behaviour of the design flaws/failures are considered for architecture safety analysis. The illustration of the proposed approach is validated by implementing the Speed Control Unit of Power-Boat Autopilot (PBA system. The Error Model Annex (EMV is guided with the pattern of consideration and inclusion of probable failure scenarios and propagation of fault conditions in the Speed Control Unit of Power-Boat Autopilot (PBA. This helps in validating the system architecture with the detection of the error event in the model and its impact in the operational environment. This also provides an insight of the certification impact that these exceptional conditions pose at various criticality levels and design assurance levels and its implications in verifying and validating the designs.

Advanced quality prediction model for software architectural knowledge sharing

NARCIS (Netherlands)

Liang, Peng; Jansen, Anton; Avgeriou, Paris; Tang, Antony; Xu, Lai

In the field of software architecture, a paradigm shift is occurring from describing the outcome of architecting process to describing the Architectural Knowledge (AK) created and used during architecting. Many AK models have been defined to represent domain concepts and their relationships, and

DAQ: Software Architecture for Data Acquisition in Sounding Rockets

Science.gov (United States)

Ahmad, Mohammad; Tran, Thanh; Nichols, Heidi; Bowles-Martinez, Jessica N.

2011-01-01

A multithreaded software application was developed by Jet Propulsion Lab (JPL) to collect a set of correlated imagery, Inertial Measurement Unit (IMU) and GPS data for a Wallops Flight Facility (WFF) sounding rocket flight. The data set will be used to advance Terrain Relative Navigation (TRN) technology algorithms being researched at JPL. This paper describes the software architecture and the tests used to meet the timing and data rate requirements for the software used to collect the dataset. Also discussed are the challenges of using commercial off the shelf (COTS) flight hardware and open source software. This includes multiple Camera Link (C-link) based cameras, a Pentium-M based computer, and Linux Fedora 11 operating system. Additionally, the paper talks about the history of the software architecture's usage in other JPL projects and its applicability for future missions, such as cubesats, UAVs, and research planes/balloons. Also talked about will be the human aspect of project especially JPL's Phaeton program and the results of the launch.

Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

Directory of Open Access Journals (Sweden)

Abdulaziz Alsahli

2016-01-01

Full Text Available Requirement change management (RCM is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD.The objective of this research is to introduce an innovative approach for handling requirements and architecture changes simultaneously during global software development. The approach makes use of Case-Based Reasoning (CBR and agile practices. Agile practices make our approach iterative, whereas CBR stores requirements and makes them reusable. Twin Peaks is our base model, meaning that requirements and architecture are handled simultaneously. For this research, grounded theory has been applied; similarly, interviews from domain experts were conducted. Interview and literature transcripts formed the basis of data collection in grounded theory. Physical saturation of theory has been achieved through a published case study and developed tool. Expert reviews and statistical analysis have been used for evaluation. The proposed approach resulted in effective change management of requirements and architecture simultaneously during global software development.

Fault Management Architectures and the Challenges of Providing Software Assurance

Science.gov (United States)

Savarino, Shirley; Fitz, Rhonda; Fesq, Lorraine; Whitman, Gerek

2015-01-01

The satellite systems Fault Management (FM) is focused on safety, the preservation of assets, and maintaining the desired functionality of the system. How FM is implemented varies among missions. Common to most is system complexity due to a need to establish a multi-dimensional structure across hardware, software and operations. This structure is necessary to identify and respond to system faults, mitigate technical risks and ensure operational continuity. These architecture, implementation and software assurance efforts increase with mission complexity. Because FM is a systems engineering discipline with a distributed implementation, providing efficient and effective verification and validation (VV) is challenging. A breakout session at the 2012 NASA Independent Verification Validation (IVV) Annual Workshop titled VV of Fault Management: Challenges and Successes exposed these issues in terms of VV for a representative set of architectures. NASA's IVV is funded by NASA's Software Assurance Research Program (SARP) in partnership with NASA's Jet Propulsion Laboratory (JPL) to extend the work performed at the Workshop session. NASA IVV will extract FM architectures across the IVV portfolio and evaluate the data set for robustness, assess visibility for validation and test, and define software assurance methods that could be applied to the various architectures and designs. This work focuses efforts on FM architectures from critical and complex projects within NASA. The identification of particular FM architectures, visibility, and associated VVIVV techniques provides a data set that can enable higher assurance that a satellite system will adequately detect and respond to adverse conditions. Ultimately, results from this activity will be incorporated into the NASA Fault Management Handbook providing dissemination across NASA, other agencies and the satellite community. This paper discusses the approach taken to perform the evaluations and preliminary findings from the

Software Architecture Design for Spatially-Indexed Media in Smart Environments

Directory of Open Access Journals (Sweden)

SCHIPOR, O.-A.

2017-05-01

Full Text Available We introduce in this work a new software architecture design, based on well-established web communication protocols and scripting languages, for implementing spatially-indexed media in smart environments. We based our approach on specific design guidelines. Our concept of spatially-indexed media enables users to readily instantiate mappings between digital content and specific regions of the physical space. We present an implementation of the architecture using a motion capture system, a large visualization display, and several smart devices. We also present an experimental evaluation of our new software architecture by reporting response times function of changes in the complexity of physical-digital environment.

A Pattern Language for the Evolution of Component-based Software Architectures

DEFF Research Database (Denmark)

Ahmad, Aakash; Jamshidi, Pooyan; Pahl, Claus

2013-01-01

Modern software systems are prone to a continuous evolution under frequently varying requirements. Architecture-centric software evolution enables change in system’s structure and behavior while maintaining a global view of the software to address evolution-centric tradeoffs. Lehman’s law...... evolution problems. We propose that architectural evolution process requires an explicit evolution-centric knowledge – that can be discovered, shared, and reused – to anticipate and guide change management. Therefore, we present a pattern language as a collection of interconnected change patterns......) as a complementary and integrated phase to facilitate reuse-driven architecture change execution (pattern language application). Reuse-knowledge in the proposed pattern language is expressed as a formalised collection of interconnected-patterns. Individual patterns in the language build on each other to facilitate...

Traceability of Requirements and Software Architecture for Change Management

NARCIS (Netherlands)

Göknil, Arda

2011-01-01

At the present day, software systems get more and more complex. The requirements of software systems change continuously and new requirements emerge frequently. New and/or modified requirements are integrated with the existing ones, and adaptations to the architecture and source code of the system

ALMA software architecture

Science.gov (United States)

Schwarz, Joseph; Raffi, Gianni

2002-12-01

The Atacama Large Millimeter Array (ALMA) is a joint project involving astronomical organizations in Europe and North America. ALMA will consist of at least 64 12-meter antennas operating in the millimeter and sub-millimeter range. It will be located at an altitude of about 5000m in the Chilean Atacama desert. The primary challenge to the development of the software architecture is the fact that both its development and runtime environments will be distributed. Groups at different institutes will develop the key elements such as Proposal Preparation tools, Instrument operation, On-line calibration and reduction, and Archiving. The Proposal Preparation software will be used primarily at scientists' home institutions (or on their laptops), while Instrument Operations will execute on a set of networked computers at the ALMA Operations Support Facility. The ALMA Science Archive, itself to be replicated at several sites, will serve astronomers worldwide. Building upon the existing ALMA Common Software (ACS), the system architects will prepare a robust framework that will use XML-encoded entity objects to provide an effective solution to the persistence needs of this system, while remaining largely independent of any underlying DBMS technology. Independence of distributed subsystems will be facilitated by an XML- and CORBA-based pass-by-value mechanism for exchange of objects. Proof of concept (as well as a guide to subsystem developers) will come from a prototype whose details will be presented.

Assessment of the integration capability of system architectures from a complex and distributed software systems perspective

Science.gov (United States)

Leuchter, S.; Reinert, F.; Müller, W.

2014-06-01

Procurement and design of system architectures capable of network centric operations demand for an assessment scheme in order to compare different alternative realizations. In this contribution an assessment method for system architectures targeted at the C4ISR domain is presented. The method addresses the integration capability of software systems from a complex and distributed software system perspective focusing communication, interfaces and software. The aim is to evaluate the capability to integrate a system or its functions within a system-of-systems network. This method uses approaches from software architecture quality assessment and applies them on the system architecture level. It features a specific goal tree of several dimensions that are relevant for enterprise integration. These dimensions have to be weighed against each other and totalized using methods from the normative decision theory in order to reflect the intention of the particular enterprise integration effort. The indicators and measurements for many of the considered quality features rely on a model based view on systems, networks, and the enterprise. That means it is applicable to System-of-System specifications based on enterprise architectural frameworks relying on defined meta-models or domain ontologies for defining views and viewpoints. In the defense context we use the NATO Architecture Framework (NAF) to ground respective system models. The proposed assessment method allows evaluating and comparing competing system designs regarding their future integration potential. It is a contribution to the system-of-systems engineering methodology.

Clean architecture a craftsman's guide to software structure and design

CERN Document Server

Martin, Robert C

2018-01-01

By applying universal rules of software architecture, you can dramatically improve developer productivity throughout the life of any software system. Now, building upon the success of his best-selling books Clean Code and The Clean Coder, legendary software craftsman Robert C. Martin (“Uncle Bob”) reveals those rules and helps you apply them. Martin’s Clean Architecture doesn’t merely present options. Drawing on over a half-century of experience in software environments of every imaginable type, Martin tells you what choices to make and why they are critical to your success. As you’ve come to expect from Uncle Bob, this book is packed with direct, no-nonsense solutions for the real challenges you’ll face—the ones that will make or break your projects. Learn what software architects need to achieve—and core disciplines and practices for achieving it Master essential software design principles for addressing function, component separation, and data management See how programming...

Knowledge Architect : A Tool Suite for Managing Software Architecture Knowledge

NARCIS (Netherlands)

Liang, Peng; Jansen, Anton; Avgeriou, Paris

2009-01-01

Management of software architecture knowledge (AK) is vital for improving an organization’s architectural capabilities. To support the architecting process within our industrial partner: Astron, the Dutch radio astronomy institute, we implemented the Knowledge Architect (KA): a tool suite for

A Systematic Mapping Study of Software Architectures for Cloud Based Systems

DEFF Research Database (Denmark)

Chauhan, Muhammad Aufeef; Babar, Muhammad Ali

2014-01-01

Context: Cloud computing has gained significant attention of researchers and practitioners. This emerging paradigm is being used to provide solutions in multiple domains without huge upfront investment because of its on demand recourse-provisioning model. However, the information about how software...... of this study is to systematically identify and analyze the currently published research on the topics related to software architectures for cloud-based systems in order to identify architecture solutions for achieving quality requirements. Method: We decided to carry out a systematic mapping study to find...... as much peer-reviewed literature on the topics related to software architectures for cloud-based systems as possible. This study has been carried out by following the guidelines for conducting systematic literature reviews and systematic mapping studies as reported in the literature. Based on our paper...

A Practical Software Architecture for Virtual Universities

Science.gov (United States)

Xiang, Peifeng; Shi, Yuanchun; Qin, Weijun

2006-01-01

This article introduces a practical software architecture called CUBES, which focuses on system integration and evolvement for online virtual universities. The key of CUBES is a supporting platform that helps to integrate and evolve heterogeneous educational applications developed by different organizations. Both standardized educational…

Software Productivity of Field Experiments Using the Mobile Agents Open Architecture with Workflow Interoperability

Science.gov (United States)

Clancey, William J.; Lowry, Michael R.; Nado, Robert Allen; Sierhuis, Maarten

2011-01-01

We analyzed a series of ten systematically developed surface exploration systems that integrated a variety of hardware and software components. Design, development, and testing data suggest that incremental buildup of an exploration system for long-duration capabilities is facilitated by an open architecture with appropriate-level APIs, specifically designed to facilitate integration of new components. This improves software productivity by reducing changes required for reconfiguring an existing system.

A software architectural framework specification for neutron activation analysis

International Nuclear Information System (INIS)

Preston, J.A.; Grant, C.N.

2013-01-01

Neutron Activation Analysis (NAA) is a sensitive multi-element nuclear analytical technique that has been routinely applied by research reactor (RR) facilities to environmental, nutritional, health related, geological and geochemical studies. As RR facilities face calls to increase their research output and impact, with existing or reducing budgets, automation of NAA offers a possible solution. However, automation has many challenges, not the least of which is a lack of system architecture standards to establish acceptable mechanisms for the various hardware/software and software/software interactions among data acquisition systems, specialised hardware such as sample changers, sample loaders, and data processing modules. This lack of standardization often results in automation hardware and software being incompatible with existing system components, in a facility looking to automate its NAA operations. This limits the availability of automation to a few RR facilities with adequate budgets or in-house engineering resources. What is needed is a modern open system architecture for NAA, that provides the required set of functionalities. This paper describes such an 'architectural framework' (OpenNAA), and portions of a reference implementation. As an example of the benefits, calculations indicate that applying this architecture to the compilation and QA steps associated with the analysis of 35 elements in 140 samples, with 14 SRM's, can reduce the time required by over 80 %. The adoption of open standards in the nuclear industry has been very successful over the years in promoting interchangeability and maximising the lifetime and output of nuclear measurement systems. OpenNAA will provide similar benefits within the NAA application space, safeguarding user investments in their current system, while providing a solid path for development into the future. (author)

A Layered Software Architecture for the Management of a Manufacturing Company

Directory of Open Access Journals (Sweden)

Domenico CONSOLI

2011-01-01

Full Text Available In this paper we describe a layered software architecture in the management of a manufactur-ing company that intensively uses computer technology. Application tools, new and legacy, after the updating, operate in a context of an open web oriented architecture. The software architecture enables the integration and interoperability among all tools that support business processes. Manufacturing Executive System and Text Mining tools are excellent interfaces, the former both for internal production and management processes and the latter for external processes coming from the market. In this way, it is possible to implement, a computer integrated factory, flexible and agile, that immediately responds to customer requirements.

On the impact of medical device regulations on software architecture

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Manikas, Konstantinos

2016-01-01

Compliance to regulations and regulatory approval are requirements for many medical device software systems. In this paper, we investigate the implications of medical device software regulations to the design of software systems. We do so by focusing on the American and European regulatory author...... of the device. Moreover, we review software modularity in the implementation of software medical device and propose a set of preliminary principles for architectural design of software medical device based on a set of constrains identified from the reviewed regulations....

Software architecture for time-constrained machine vision applications

Science.gov (United States)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2013-01-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility, because they are normally oriented toward particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse, and inefficient execution on multicore processors. We present a novel software architecture for time-constrained machine vision applications that addresses these issues. The architecture is divided into three layers. The platform abstraction layer provides a high-level application programming interface for the rest of the architecture. The messaging layer provides a message-passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of message. The application layer provides a repository for reusable application modules designed for machine vision applications. These modules, which include acquisition, visualization, communication, user interface, and data processing, take advantage of the power of well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, the proposed architecture is applied to a real machine vision application: a jam detector for steel pickling lines.

Human aspects in software architecture decision making : a literature review

NARCIS (Netherlands)

Tang, A.; Razavian, M.; Paech, Barbara; Hesse, T.M.

2017-01-01

Despite past efforts, we have little understanding and limited research efforts on how architects make decisions in the real-world settings. It seems that software architecture researchers make implicit assumption that decision making by software architects can be a rational and prescribed process.

NASA's Advanced Multimission Operations System: A Case Study in Formalizing Software Architecture Evolution

Science.gov (United States)

Barnes, Jeffrey M.

2011-01-01

All software systems of significant size and longevity eventually undergo changes to their basic architectural structure. Such changes may be prompted by evolving requirements, changing technology, or other reasons. Whatever the cause, software architecture evolution is commonplace in real world software projects. Recently, software architecture researchers have begun to study this phenomenon in depth. However, this work has suffered from problems of validation; research in this area has tended to make heavy use of toy examples and hypothetical scenarios and has not been well supported by real world examples. To help address this problem, I describe an ongoing effort at the Jet Propulsion Laboratory to re-architect the Advanced Multimission Operations System (AMMOS), which is used to operate NASA's deep-space and astrophysics missions. Based on examination of project documents and interviews with project personnel, I describe the goals and approach of this evolution effort and then present models that capture some of the key architectural changes. Finally, I demonstrate how approaches and formal methods from my previous research in architecture evolution may be applied to this evolution, while using languages and tools already in place at the Jet Propulsion Laboratory.

Architecture of the software for LAMOST fiber positioning subsystem

Science.gov (United States)

Peng, Xiaobo; Xing, Xiaozheng; Hu, Hongzhuan; Zhai, Chao; Li, Weimin

2004-09-01

The architecture of the software which controls the LAMOST fiber positioning sub-system is described. The software is composed of two parts as follows: a main control program in a computer and a unit controller program in a MCS51 single chip microcomputer ROM. And the function of the software includes: Client/Server model establishment, observation planning, collision handling, data transmission, pulse generation, CCD control, image capture and processing, and data analysis etc. Particular attention is paid to the ways in which different parts of the software can communicate. Also software techniques for multi threads, SOCKET programming, Microsoft Windows message response, and serial communications are discussed.

Leveraging Software Architectures through the ISO/IEC 42010 standard: A Feasibility Study

NARCIS (Netherlands)

Tamburri, D.A.; Lago, P.; Muccini, H.; Proper, E.; Lankhorst, M.; Schoenherr, M.

2011-01-01

The state of the practice in enterprise and software architecture learnt that relevant architectural aspects should be illustrated in multiple views, targeting the various concerns of different stakeholders. This has been expressed a.o. in the ISO/IEC 42010 Standard on architecture descriptions. In

Visualizing Metrics on Areas of Interest in Software Architecture Diagrams

NARCIS (Netherlands)

Byelas, Heorhiy; Telea, Alexandru; Eades, P; Ertl, T; Shen, HW

2009-01-01

We present a new method for the combined visualization of software architecture diagrams, Such as UML class diagrams or component diagrams, and software metrics defined on groups of diagram elements. Our method extends an existing rendering technique for the so-called areas of interest in system

High-level language computer architecture

CERN Document Server

Chu, Yaohan

1975-01-01

High-Level Language Computer Architecture offers a tutorial on high-level language computer architecture, including von Neumann architecture and syntax-oriented architecture as well as direct and indirect execution architecture. Design concepts of Japanese-language data processing systems are discussed, along with the architecture of stack machines and the SYMBOL computer system. The conceptual design of a direct high-level language processor is also described.Comprised of seven chapters, this book first presents a classification of high-level language computer architecture according to the pr

Software architecture for the ORNL large-coil test facility data system

International Nuclear Information System (INIS)

Blair, E.T.; Baylor, L.R.

1986-01-01

The VAX-based data-acquisition system for the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second-generation system that evolved from a PDP-11/60-based system used during the initial phase of facility testing. The VAX-based software represents a layered implementation that provides integrated access to all of the data sources within the system, decoupling end-user data retrieval from various front-end data sources through a combination of software architecture and instrumentation data bases. Independent VAX processes manage the various front-end data sources, each being responsible for controlling, monitoring, acquiring, and disposing data and control parameters for access from the data retrieval software. This paper describes the software architecture and the functionality incorporated into the various layers of the data system

Software architecture for the ORNL large coil test facility data system

International Nuclear Information System (INIS)

Blair, E.T.; Baylor, L.R.

1986-01-01

The VAX-based data acquisition system for the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second-generation system that evolved from a PDP-11/60-based system used during the initial phase of facility testing. The VAX-based software represents a layered implementation that provides integrated access to all of the data sources within the system, deoupling end-user data retrieval from various front-end data sources through a combination of software architecture and instrumentation data bases. Independent VAX processes manage the various front-end data sources, each being responsible for controlling, monitoring, acquiring and disposing data and control parameters for access from the data retrieval software. This paper describes the software architecture and the functionality incorporated into the various layers of the data system

Software architecture for hybrid electrical/optical data center network

DEFF Research Database (Denmark)

Mehmeri, Victor; Vegas Olmos, Juan José; Tafur Monroy, Idelfonso

2016-01-01

This paper presents hardware and software architecture based on Software-Defined Networking (SDN) paradigm and OpenFlow/NETCONF protocols for enabling topology management of hybrid electrical/optical switching data center networks. In particular, a development on top of SDN open-source controller...... OpenDaylight is presented to control an optical switching matrix based on Micro-Electro-Mechanical System (MEMS) technology....

Architectural Knowledge Discovery with Latent Semantic Analysis: Constructing a Reading Guide for Software Product Audits

NARCIS (Netherlands)

de Boer, R.C.; van Vliet, H.

2008-01-01

Architectural knowledge is reflected in various artifacts of a software product. In a software product audit this architectural knowledge needs to be uncovered and its effects assessed in order to evaluate the quality of the software product. A particular problem is to find and comprehend the

Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

Energy Technology Data Exchange (ETDEWEB)

Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

2014-06-01

There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

A relational approach to support software architecture analysis

NARCIS (Netherlands)

Feijs, L.M.G.; Krikhaar, R.L.; van Ommering, R.C.

1998-01-01

This paper reports on our experience with a relational approach to support the analysis of existing software architectures. The analysis options provide for visualization and view calculation. The approach has been applied for reverse engineering. It is also possible to check concrete designs

Implementations of a four-level mechanical architecture for fault-tolerant robots

International Nuclear Information System (INIS)

Hooper, Richard; Sreevijayan, Dev; Tesar, Delbert; Geisinger, Joseph; Kapoor, Chelan

1996-01-01

This paper describes a fault tolerant mechanical architecture with four levels devised and implemented in concert with NASA (Tesar, D. and Sreevijayan, D., Four-level fault tolerance in manipulator design for space operations. In First Int. Symp. Measurement and Control in Robotics (ISMCR '90), Houston, Texas, 20-22 June 1990.) Subsequent work has clarified and revised the architecture. The four levels proceed from fault tolerance at the actuator level, to fault tolerance via in-parallel chains, to fault tolerance using serial kinematic redundancy, and finally to the fault tolerance multiple arm systems provide. This is a subsumptive architecture because each successive layer can incorporate the fault tolerance provided by all layers beneath. For instance a serially-redundant robot can incorporate dual fault-tolerant actuators. Redundant systems provide the fault tolerance, but the guiding principle of this architecture is that functional redundancies actively increase the performance of the system. Redundancies do not simply remain dormant until needed. This paper includes specific examples of hardware and/or software implementation at all four levels

Current research topics and trends in the software architecture community : ICSA 2017 Workshops summary

NARCIS (Netherlands)

Malavolta, Ivano; Capilla, Rafael

2017-01-01

This summary reports the workshops accepted in the 1st International Conference on Software Architecture (ICSA 2017), held by Chalmers University at Gothenburg (Sweden). We gather the description of current and new research trends in different software architecture topics to provide a wide view to

Generic Software Architecture for Prognostics (GSAP) User Guide

Science.gov (United States)

Teubert, Christopher Allen; Daigle, Matthew John; Watkins, Jason; Sankararaman, Shankar; Goebel, Kai

2016-01-01

The Generic Software Architecture for Prognostics (GSAP) is a framework for applying prognostics. It makes applying prognostics easier by implementing many of the common elements across prognostic applications. The standard interface enables reuse of prognostic algorithms and models across systems using the GSAP framework.

A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

Directory of Open Access Journals (Sweden)

R. Cenk ERDUR

2003-01-01

Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

MZDASoft: a software architecture that enables large-scale comparison of protein expression levels over multiple samples based on liquid chromatography/tandem mass spectrometry.

Science.gov (United States)

Ghanat Bari, Mehrab; Ramirez, Nelson; Wang, Zhiwei; Zhang, Jianqiu Michelle

2015-10-15

Without accurate peak linking/alignment, only the expression levels of a small percentage of proteins can be compared across multiple samples in Liquid Chromatography/Mass Spectrometry/Tandem Mass Spectrometry (LC/MS/MS) due to the selective nature of tandem MS peptide identification. This greatly hampers biomedical research that aims at finding biomarkers for disease diagnosis, treatment, and the understanding of disease mechanisms. A recent algorithm, PeakLink, has allowed the accurate linking of LC/MS peaks without tandem MS identifications to their corresponding ones with identifications across multiple samples collected from different instruments, tissues and labs, which greatly enhanced the ability of comparing proteins. However, PeakLink cannot be implemented practically for large numbers of samples based on existing software architectures, because it requires access to peak elution profiles from multiple LC/MS/MS samples simultaneously. We propose a new architecture based on parallel processing, which extracts LC/MS peak features, and saves them in database files to enable the implementation of PeakLink for multiple samples. The software has been deployed in High-Performance Computing (HPC) environments. The core part of the software, MZDASoft Parallel Peak Extractor (PPE), can be downloaded with a user and developer's guide, and it can be run on HPC centers directly. The quantification applications, MZDASoft TandemQuant and MZDASoft PeakLink, are written in Matlab, which are compiled with a Matlab runtime compiler. A sample script that incorporates all necessary processing steps of MZDASoft for LC/MS/MS quantification in a parallel processing environment is available. The project webpage is http://compgenomics.utsa.edu/zgroup/MZDASoft. The proposed architecture enables the implementation of PeakLink for multiple samples. Significantly more (100%-500%) proteins can be compared over multiple samples with better quantification accuracy in test cases. MZDASoft

Discrete-Time Mixing Receiver Architecture for RF-Sampling Software-Defined Radio

NARCIS (Netherlands)

Ru, Z.; Klumperink, Eric A.M.; Nauta, Bram

2010-01-01

Abstract—A discrete-time (DT) mixing architecture for RF-sampling receivers is presented. This architecture makes RF sampling more suitable for software-defined radio (SDR) as it achieves wideband quadrature demodulation and wideband harmonic rejection. The paper consists of two parts. In the first

Verifying Architectural Design Rules of the Flight Software Product Line

Science.gov (United States)

Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

2009-01-01

This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

Software architecture design patterns in Java

CERN Document Server

Kuchana, Partha

2004-01-01

AN INTRODUCTION TO DESIGN PATTERNSDesign Patterns: Origin and HistoryArchitectural to Software Design PatternsWhat is a Design Pattern?More about Design PatternsAbout This BookUNIFIED MODELING LANGUAGE (UML)UML: A Quick ReferenceClass DiagramsSequence diagramsBASIC PATTERNSInterfaceDescriptionExamplePractice QuestionsAbstract Parent ClassDescriptionExamplePractice QuestionsPrivate MethodsDescriptionExamplePractice QuestionsAccessor MethodsDescriptionAccessor Method NomenclatureExampleDirect Reference versus Accessor MethodsPractice QuestionsConstant Data ManagerDescriptionExamplePractice Quest

Architecture of a software quench management system

International Nuclear Information System (INIS)

Jerzy M. Nogiec et al.

2001-01-01

Testing superconducting accelerator magnets is inherently coupled with the proper handling of quenches; i.e., protecting the magnet and characterizing the quench process. Therefore, software implementations must include elements of both data acquisition and real-time controls. The architecture of the quench management software developed at Fermilab's Magnet Test Facility is described. This system consists of quench detection, quench protection, and quench characterization components that execute concurrently in a distributed system. Collaboration between the elements of quench detection, quench characterization and current control are discussed, together with a schema of distributed saving of various quench-related data. Solutions to synchronization and reliability in such a distributed quench system are also presented

A research on the application of software defined networking in satellite network architecture

Science.gov (United States)

Song, Huan; Chen, Jinqiang; Cao, Suzhi; Cui, Dandan; Li, Tong; Su, Yuxing

2017-10-01

Software defined network is a new type of network architecture, which decouples control plane and data plane of traditional network, has the feature of flexible configurations and is a direction of the next generation terrestrial Internet development. Satellite network is an important part of the space-ground integrated information network, while the traditional satellite network has the disadvantages of difficult network topology maintenance and slow configuration. The application of SDN technology in satellite network can solve these problems that traditional satellite network faces. At present, the research on the application of SDN technology in satellite network is still in the stage of preliminary study. In this paper, we start with introducing the SDN technology and satellite network architecture. Then we mainly introduce software defined satellite network architecture, as well as the comparison of different software defined satellite network architecture and satellite network virtualization. Finally, the present research status and development trend of SDN technology in satellite network are analyzed.

A Reusable Software Architecture for Small Satellite AOCS Systems

DEFF Research Database (Denmark)

Alminde, Lars; Bendtsen, Jan Dimon; Laursen, Karl Kaas

2006-01-01

This paper concerns the software architecture called Sophy, which is an abbreviation for Simulation, Observation, and Planning in HYbrid systems. We present a framework that allows execution of hybrid dynamical systems in an on-line distributed computing environment, which includes interaction...... with both hardware and on-board software. Some of the key issues addressed by the framework are automatic translation of mathematical specifications of hybrid systems into executable software entities, management of execution of coupled models in a parallel distributed environment, as well as interaction...... with external components, hardware and/or software, through generic interfaces. Sophy is primarily intended as a tool for development of model based reusable software for the control and autonomous functions of satellites and/or satellite clusters....

Modeling of a 3DTV service in the software-defined networking architecture

Science.gov (United States)

Wilczewski, Grzegorz

2014-11-01

In this article a newly developed concept towards modeling of a multimedia service offering stereoscopic motion imagery is presented. Proposed model is based on the approach of utilization of Software-defined Networking or Software Defined Networks architecture (SDN). The definition of 3D television service spanning SDN concept is identified, exposing basic characteristic of a 3DTV service in a modern networking organization layout. Furthermore, exemplary functionalities of the proposed 3DTV model are depicted. It is indicated that modeling of a 3DTV service in the Software-defined Networking architecture leads to multiplicity of improvements, especially towards flexibility of a service supporting heterogeneity of end user devices.

Conceptual Architecture of Building Energy Management Open Source Software (BEMOSS)

Energy Technology Data Exchange (ETDEWEB)

Khamphanchai, Warodom; Saha, Avijit; Rathinavel, Kruthika; Kuzlu, Murat; Pipattanasomporn, Manisa; Rahman, Saifur; Akyol, Bora A.; Haack, Jereme N.

2014-12-01

The objective of this paper is to present a conceptual architecture of a Building Energy Management Open Source Software (BEMOSS) platform. The proposed BEMOSS platform is expected to improve sensing and control of equipment in small- and medium-sized buildings, reduce energy consumption and help implement demand response (DR). It aims to offer: scalability, robustness, plug and play, open protocol, interoperability, cost-effectiveness, as well as local and remote monitoring. In this paper, four essential layers of BEMOSS software architecture -- namely User Interface, Application and Data Management, Operating System and Framework, and Connectivity layers -- are presented. A laboratory test bed to demonstrate the functionality of BEMOSS located at the Advanced Research Institute of Virginia Tech is also briefly described.

Software Defined Radio Architecture Contributions to Next Generation Space Communications

Science.gov (United States)

Kacpura, Thomas J.; Eddy, Wesley M.; Smith, Carl R.; Liebetreu, John

2015-01-01

systems, as well as those communications and navigation systems operated by international space agencies and civilian and government agencies. In this paper, we review the philosophies, technologies, architectural attributes, mission services, and communications capabilities that form the structure of candidate next-generation integrated communication architectures for space communications and navigation. A key area that this paper explores is from the development and operation of the software defined radio for the NASA Space Communications and Navigation (SCaN) Testbed currently on the International Space Station (ISS). Evaluating the lessons learned from development and operation feed back into the communications architecture. Leveraging the reconfigurability provides a change in the way that operations are done and must be considered. Quantifying the impact on the NASA Space Telecommunications Radio System (STRS) software defined radio architecture provides feedback to keep the standard useful and up to date. NASA is not the only customer of these radios. Software defined radios are developed for other applications, and taking advantage of these developments promotes an architecture that is cost effective and sustainable. Developments in the following areas such as an updated operating environment, higher data rates, networking and security can be leveraged. The ability to sustain an architecture that uses radios for multiple markets can lower costs and keep new technology infused.

Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

OpenAIRE

Alsahli, Abdulaziz; Khan, Hameed; Alyahya, Sultan

2016-01-01

Requirement change management (RCM) is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD).The o...

The architecture of a reliable software monitoring system for embedded software systems

International Nuclear Information System (INIS)

Munson, J.; Krings, A.; Hiromoto, R.

2006-01-01

away from the currently applied paradigm of addressing reliability, security and survivability in an add-on fashion at the end of the software development process. Rather, the integrity monitoring ability will be integrated into the overall architecture of the software system. The measurement and control methodology developed under this research program will readily migrate into hardware, leading to the development of new hardware architecture with built-in survivability, security and reliability attributes. (authors)

Power, Avionics and Software Communication Network Architecture

Science.gov (United States)

Ivancic, William D.; Sands, Obed S.; Bakula, Casey J.; Oldham, Daniel R.; Wright, Ted; Bradish, Martin A.; Klebau, Joseph M.

2014-01-01

This document describes the communication architecture for the Power, Avionics and Software (PAS) 2.0 subsystem for the Advanced Extravehicular Mobile Unit (AEMU). The following systems are described in detail: Caution Warn- ing and Control System, Informatics, Storage, Video, Audio, Communication, and Monitoring Test and Validation. This document also provides some background as well as the purpose and goals of the PAS project at Glenn Research Center (GRC).

Dynamic Weather Routes Architecture Overview

Science.gov (United States)

Eslami, Hassan; Eshow, Michelle

2014-01-01

Dynamic Weather Routes Architecture Overview, presents the high level software architecture of DWR, based on the CTAS software framework and the Direct-To automation tool. The document also covers external and internal data flows, required dataset, changes to the Direct-To software for DWR, collection of software statistics, and the code structure.

Lightweight and Continuous Architectural Software Quality Assurance using the aSQA Technique

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius; Lindstrøm, Bo

2010-01-01

In this paper, we present a novel technique for assessing and prioritizing architectural quality in large-scale software development projects. The technique can be applied with relatively little effort by software architects and thus suited for agile development in which quality attributes can...... be assessed and prioritized, e.g., within each development sprint. We outline the processes and metrics embodied in the technique, and report initial experiences on the benefits and liabilities. In conclusion, the technique is considered valuable and a viable tool, and has benefits in an architectural...

Architecture of 'Ecoview' software for prediction of impurities migration in soil

International Nuclear Information System (INIS)

Kundas, S.P.; Kovalenko, V.I.

2008-01-01

Architecture of developing software 'EcoView' for prediction of impurity migration in soil is based on hybrid expert system and includes several fuzzy instruments. Besides it modules of physic-mathematical modeling, geographic information system, data base for storing necessary information (maps, various experimental data, calculating results etc.) are incorporated in software. (authors)

Flexible software architecture for user-interface and machine control in laboratory automation.

Science.gov (United States)

Arutunian, E B; Meldrum, D R; Friedman, N A; Moody, S E

1998-10-01

We describe a modular, layered software architecture for automated laboratory instruments. The design consists of a sophisticated user interface, a machine controller and multiple individual hardware subsystems, each interacting through a client-server architecture built entirely on top of open Internet standards. In our implementation, the user-interface components are built as Java applets that are downloaded from a server integrated into the machine controller. The user-interface client can thereby provide laboratory personnel with a familiar environment for experiment design through a standard World Wide Web browser. Data management and security are seamlessly integrated at the machine-controller layer using QNX, a real-time operating system. This layer also controls hardware subsystems through a second client-server interface. This architecture has proven flexible and relatively easy to implement and allows users to operate laboratory automation instruments remotely through an Internet connection. The software architecture was implemented and demonstrated on the Acapella, an automated fluid-sample-processing system that is under development at the University of Washington.

Architecture and evaluation of software-defined optical switching matrix for hybrid data centers

DEFF Research Database (Denmark)

Mehmeri, Victor; Vegas Olmos, Juan José; Tafur Monroy, Idelfonso

2016-01-01

A software architecture is proposed for hybrid packet/optical data centers employing programmable NETCONF-enabled optical switching matrix, and a performance evaluation is presented comparing hybrid and electrical-only architectures for elephant flows under different traffic patterns. Network...

High-Level Design Space and Flexibility Exploration for Adaptive, Energy-Efficient WCDMA Channel Estimation Architectures

Directory of Open Access Journals (Sweden)

Zoltán Endre Rákossy

2012-01-01

Full Text Available Due to the fast changing wireless communication standards coupled with strict performance constraints, the demand for flexible yet high-performance architectures is increasing. To tackle the flexibility requirement, software-defined radio (SDR is emerging as an obvious solution, where the underlying hardware implementation is tuned via software layers to the varied standards depending on power-performance and quality requirements leading to adaptable, cognitive radio. In this paper, we conduct a case study for representatives of two complexity classes of WCDMA channel estimation algorithms and explore the effect of flexibility on energy efficiency using different implementation options. Furthermore, we propose new design guidelines for both highly specialized architectures and highly flexible architectures using high-level synthesis, to enable the required performance and flexibility to support multiple applications. Our experiments with various design points show that the resulting architectures meet the performance constraints of WCDMA and a wide range of options are offered for tuning such architectures depending on power/performance/area constraints of SDR.

SOFTWARE ARCHITECTURE DESIGN OF GIS WEB SERVICE AGGREGATION BASED ON SERVICE GROUP

Directory of Open Access Journals (Sweden)

J.-C. Liu

2012-08-01

Full Text Available Based on the analysis of research status of domestic and international GIS web service aggregation and development tendency of public platform of GIS web service, the paper designed software architecture of GIS web service aggregation based on GIS web service group. Firstly, using heterogeneous GIS services model, the software architecture converted a variety of heterogeneous services to a unified interface of GIS services, and divided different types of GIS services into different service groups referring to description of GIS services. Secondly, a service aggregation process model was designed. This model completed the task of specific service aggregation instance, by automatically selecting member GIS Web services in the same service group. Dynamic capabilities and automatic adaptation of GIS Web services aggregation process were achieved. Thirdly, this paper designed a service evaluation model of GIS web service aggregation based on service group from three aspects, i.e. GIS Web Service itself, networking conditions and service consumer. This model implemented effective quality evaluation and performance monitoring of GIS web service aggregation. It could be used to guide the execution, monitor and service selection of aggregation process. Therefore, robustness of aggregated GIS web service was improved. Finally, the software architecture has been widely used in public platform of GIS web service and a number of geo-spatial framework constructions for digital city in Sichuan Province, and aggregated various GIS web services such as World Map(National Public Platform of Geo-spatial Service, ArcGIS, SuperMap, MapGIS, NewMap etc. Applications of items showed that this software architecture was practicability.

The architecture of the CMS Level-1 Trigger Control and Monitoring System using UML

International Nuclear Information System (INIS)

Magrans de Abril, Marc; Ghabrous Larrea, Carlos; Lazaridis, Christos; Da Rocha Melo, Jose L; Hammer, Josef; Hartl, Christian

2011-01-01

The architecture of the Compact Muon Solenoid (CMS) Level-1 Trigger Control and Monitoring software system is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. The architecture of this system is described using the industry-standard Universal Modeling Language (UML). This way the relationships between the different subcomponents of the system become clear and all software upgrades and modifications are simplified. The described architecture has allowed for frequent upgrades that were necessary during the commissioning phase of CMS when the trigger system evolved constantly. As a secondary objective, the paper provides a UML usage example and tries to encourage the standardization of the software documentation of large projects across the LHC and High Energy Physics community.

The architecture of the CMS Level-1 Trigger Control and Monitoring System using UML

Science.gov (United States)

Magrans de Abril, Marc; Da Rocha Melo, Jose L.; Ghabrous Larrea, Carlos; Hammer, Josef; Hartl, Christian; Lazaridis, Christos

2011-12-01

The architecture of the Compact Muon Solenoid (CMS) Level-1 Trigger Control and Monitoring software system is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. The architecture of this system is described using the industry-standard Universal Modeling Language (UML). This way the relationships between the different subcomponents of the system become clear and all software upgrades and modifications are simplified. The described architecture has allowed for frequent upgrades that were necessary during the commissioning phase of CMS when the trigger system evolved constantly. As a secondary objective, the paper provides a UML usage example and tries to encourage the standardization of the software documentation of large projects across the LHC and High Energy Physics community.

An architectural approach to level design

CERN Document Server

Totten, Christopher W

2014-01-01

Explore Level Design through the Lens of Architectural and Spatial Experience TheoryWritten by a game developer and professor trained in architecture, An Architectural Approach to Level Design is one of the first books to integrate architectural and spatial design theory with the field of level design. It explores the principles of level design through the context and history of architecture, providing information useful to both academics and game development professionals.Understand Spatial Design Principles for Game Levels in 2D, 3D, and Multiplayer ApplicationsThe book presents architectura

A Trustworthiness Evaluation Method for Software Architectures Based on the Principle of Maximum Entropy (POME and the Grey Decision-Making Method (GDMM

Directory of Open Access Journals (Sweden)

Rong Jiang

2014-09-01

Full Text Available As the early design decision-making structure, a software architecture plays a key role in the final software product quality and the whole project. In the software design and development process, an effective evaluation of the trustworthiness of a software architecture can help making scientific and reasonable decisions on the architecture, which are necessary for the construction of highly trustworthy software. In consideration of lacking the trustworthiness evaluation and measurement studies for software architecture, this paper provides one trustworthy attribute model of software architecture. Based on this model, the paper proposes to use the Principle of Maximum Entropy (POME and Grey Decision-making Method (GDMM as the trustworthiness evaluation method of a software architecture and proves the scientificity and rationality of this method, as well as verifies the feasibility through case analysis.

Using UML Modeling to Facilitate Three-Tier Architecture Projects in Software Engineering Courses

Science.gov (United States)

Mitra, Sandeep

2014-01-01

This article presents the use of a model-centric approach to facilitate software development projects conforming to the three-tier architecture in undergraduate software engineering courses. Many instructors intend that such projects create software applications for use by real-world customers. While it is important that the first version of these…

The Orion GN and C Data-Driven Flight Software Architecture for Automated Sequencing and Fault Recovery

Science.gov (United States)

King, Ellis; Hart, Jeremy; Odegard, Ryan

2010-01-01

The Orion Crew Exploration Vehicle (CET) is being designed to include significantly more automation capability than either the Space Shuttle or the International Space Station (ISS). In particular, the vehicle flight software has requirements to accommodate increasingly automated missions throughout all phases of flight. A data-driven flight software architecture will provide an evolvable automation capability to sequence through Guidance, Navigation & Control (GN&C) flight software modes and configurations while maintaining the required flexibility and human control over the automation. This flexibility is a key aspect needed to address the maturation of operational concepts, to permit ground and crew operators to gain trust in the system and mitigate unpredictability in human spaceflight. To allow for mission flexibility and reconfrgurability, a data driven approach is being taken to load the mission event plan as well cis the flight software artifacts associated with the GN&C subsystem. A database of GN&C level sequencing data is presented which manages and tracks the mission specific and algorithm parameters to provide a capability to schedule GN&C events within mission segments. The flight software data schema for performing automated mission sequencing is presented with a concept of operations for interactions with ground and onboard crew members. A prototype architecture for fault identification, isolation and recovery interactions with the automation software is presented and discussed as a forward work item.

Bottom-up, top-down? Connecting software architecture design with use

DEFF Research Database (Denmark)

Büscher, Monika; Christensen, Michael; Hansen, Klaus Marius

2009-01-01

Participatory design has traditinally focused on the design of technology applications or the co-realisation of a more holostic socio-technical bricolage of new and existing technologies and pratices. 'Infrastructural' design issues like software architectures, programming languages, communicatio...

Architecture-Level Exploration of Alternative Interconnection Schemes Targeting 3D FPGAs: A Software-Supported Methodology

Directory of Open Access Journals (Sweden)

Kostas Siozios

2008-01-01

Full Text Available In current reconfigurable architectures, the interconnection structures increasingly contribute more to the delay and power consumption. The demand for increased clock frequencies and logic density (smaller area footprint makes the problem even more important. Three-dimensional (3D architectures are able to alleviate this problem by accommodating a number of functional layers, each of which might be fabricated in different technology. However, the benefits of such integration technology have not been sufficiently explored yet. In this paper, we propose a software-supported methodology for exploring and evaluating alternative interconnection schemes for 3D FPGAs. In order to support the proposed methodology, three new CAD tools were developed (part of the 3D MEANDER Design Framework. During our exploration, we study the impact of vertical interconnection between functional layers in a number of design parameters. More specifically, the average gains in operation frequency, power consumption, and wirelength are 35%, 32%, and 13%, respectively, compared to existing 2D FPGAs with identical logic resources. Also, we achieve higher utilization ratio for the vertical interconnections compared to existing approaches by 8% for designing 3D FPGAs, leading to cheaper and more reliable devices.

Dependencies among Architectural Views Got from Software Requirements Based on a Formal Model

Directory of Open Access Journals (Sweden)

Osis Janis

2014-12-01

Full Text Available A system architect has software requirements and some unspecified knowledge about a problem domain (e.g., an enterprise as source information for assessment and evaluation of possible solutions and getting the target point, a preliminary software design. The solving factor is architect’s experience and expertise in the problem domain (“AS-IS”. A proposed approach is dedicated to assist a system architect in making an appropriate decision on the solution (“TO-BE”. It is based on a formal mathematical model, Topological Functioning Model (TFM. Compliant TFMs can be transformed into software architectural views. The paper demonstrates and discusses tracing dependency links from the requirements to and between the architectural views.

Software Abstractions and Methodologies for HPC Simulation Codes on Future Architectures

Directory of Open Access Journals (Sweden)

Anshu Dubey

2014-07-01

Full Text Available Simulations with multi-physics modeling have become crucial to many science and engineering fields, and multi-physics capable scientific software is as important to these fields as instruments and facilities are to experimental sciences. The current generation of mature multi-physics codes would have sustainably served their target communities with modest amount of ongoing investment for enhancing capabilities. However, the revolution occurring in the hardware architecture has made it necessary to tackle the parallelism and performance management in these codes at multiple levels. The requirements of various levels are often at cross-purposes with one another, and therefore hugely complicate the software design. All of these considerations make it essential to approach this challenge cooperatively as a community. We conducted a series of workshops under an NSF-SI2 conceptualization grant to get input from various stakeholders, and to identify broad approaches that might lead to a solution. In this position paper we detail the major concerns articulated by the application code developers, and emerging trends in utilization of programming abstractions that we found through these workshops.

A Software Reference Architecture for Service-Oriented 3D Geovisualization Systems

Directory of Open Access Journals (Sweden)

Dieter Hildebrandt

2014-12-01

Full Text Available Modern 3D geovisualization systems (3DGeoVSs are complex and evolving systems that are required to be adaptable and leverage distributed resources, including massive geodata. This article focuses on 3DGeoVSs built based on the principles of service-oriented architectures, standards and image-based representations (SSI to address practically relevant challenges and potentials. Such systems facilitate resource sharing and agile and efficient system construction and change in an interoperable manner, while exploiting images as efficient, decoupled and interoperable representations. The software architecture of a 3DGeoVS and its underlying visualization model have strong effects on the system’s quality attributes and support various system life cycle activities. This article contributes a software reference architecture (SRA for 3DGeoVSs based on SSI that can be used to design, describe and analyze concrete software architectures with the intended primary benefit of an increase in effectiveness and efficiency in such activities. The SRA integrates existing, proven technology and novel contributions in a unique manner. As the foundation for the SRA, we propose the generalized visualization pipeline model that generalizes and overcomes expressiveness limitations of the prevalent visualization pipeline model. To facilitate exploiting image-based representations (IReps, the SRA integrates approaches for the representation, provisioning and styling of and interaction with IReps. Five applications of the SRA provide proofs of concept for the general applicability and utility of the SRA. A qualitative evaluation indicates the overall suitability of the SRA, its applications and the general approach of building 3DGeoVSs based on SSI.

Software Architecture for a Virtual Environment for Nano Scale Assembly (VENSA).

Science.gov (United States)

Lee, Yong-Gu; Lyons, Kevin W; Feng, Shaw C

2004-01-01

A Virtual Environment (VE) uses multiple computer-generated media to let a user experience situations that are temporally and spatially prohibiting. The information flow between the user and the VE is bidirectional and the user can influence the environment. The software development of a VE requires orchestrating multiple peripherals and computers in a synchronized way in real time. Although a multitude of useful software components for VEs exists, many of these are packaged within a complex framework and can not be used separately. In this paper, an architecture is presented which is designed to let multiple frameworks work together while being shielded from the application program. This architecture, which is called the Virtual Environment for Nano Scale Assembly (VENSA), has been constructed for interfacing with an optical tweezers instrument for nanotechnology development. However, this approach can be generalized for most virtual environments. Through the use of VENSA, the programmer can rely on existing solutions and concentrate more on the application software design.

dSDiVN: a distributed Software-Defined Networking architecture for Infrastructure-less Vehicular Networks

OpenAIRE

Alioua, Ahmed; Senouci, Sidi-Mohammed; Moussaoui, Samira

2017-01-01

In the last few years, the emerging network architecture paradigm of Software-Defined Networking (SDN), has become one of the most important technology to manage large scale networks such as Vehicular Ad-hoc Networks (VANETs). Recently, several works have shown interest in the use of SDN paradigm in VANETs. SDN brings flexibility, scalability and management facility to current VANETs. However, almost all of proposed Software-Defined VANET (SDVN) architectures are infrastructure-based. This pa...

Software representation methodology for agile application development: An architectural approach

Directory of Open Access Journals (Sweden)

Alejandro Paolo Daza Corredor

2016-06-01

Full Text Available The generation of Web applications represents the execution of repetitive tasks, this process involves determining information structures, the generation of different types of components and finally deployment tasks and tuning applications. In many applications of this type are coincident components generated from application to application. Current trends in software engineering as MDE, MDA or MDD pretend to automate the generation of applications based on structuring a model to apply transformations to the achievement of the application. This document intends to translate an architectural foundation that facilitates the generation of these applications relying on model-driven architecture but without ignoring the existence and relevance of existing trends mentioned in this summary architectural models.

Frame of reference of software architecture for web applications and mobile

Directory of Open Access Journals (Sweden)

Carlos Alberto Maliza Martinez

2016-08-01

Full Text Available Given the need to have a guide for the implementation of informatics applications, and thus achieve automate tasks improving response times of users, designed the framework of reference the architecture software for web and mobile applications with technology free software and open source. The technology to be used is the Object Oriented Programming (OOP with JAVA programming language, a client / server architecture and style of multitier architecture, which will allow us to create scalable, robust and stable systems, together of Java Platform Enterprise Edition (JEE that helps us to implement business applications thanks to the JPA and EJB APIs. By the server for handling transactions, security, scalability and concurrency we have Wildfly application server. And on the client side, for creating graphical interfaces we use the ExtJS and Sencha Touch Framework, which are lightweight, high-performance libraries based on HTML5, JavaScript and CSS3. The report generator is JasperReports, because it has the ability to deliver rich content display and printer. The database engine is MySQL, because its connectivity, speed, and security make it a very appropriate server for access from the web. Finally, as editor of web and mobile applications, we have the integrated development environment Eclipse IDE platform of open source. In this paper we make a critical analysis of such applications and formulate the Framework of Software Architecture for the development and implementation of Web and Mobile Applications, which were implemented in the ECU911 Babahoyo and at the Instituto Tecnologico Superior Babahoyo, proving through its application their effectiveness and efficiency in the implementation of integrated systems

A Hybrid Hardware and Software Component Architecture for Embedded System Design

Science.gov (United States)

Marcondes, Hugo; Fröhlich, Antônio Augusto

Embedded systems are increasing in complexity, while several metrics such as time-to-market, reliability, safety and performance should be considered during the design of such systems. A component-based design which enables the migration of its components between hardware and software can cope to achieve such metrics. To enable that, we define hybrid hardware and software components as a development artifact that can be deployed by different combinations of hardware and software elements. In this paper, we present an architecture for developing such components in order to construct a repository of components that can migrate between the hardware and software domains to meet the design system requirements.

Application of parallelized software architecture to an autonomous ground vehicle

Science.gov (United States)

Shakya, Rahul; Wright, Adam; Shin, Young Ho; Momin, Orko; Petkovsek, Steven; Wortman, Paul; Gautam, Prasanna; Norton, Adam

2011-01-01

This paper presents improvements made to Q, an autonomous ground vehicle designed to participate in the Intelligent Ground Vehicle Competition (IGVC). For the 2010 IGVC, Q was upgraded with a new parallelized software architecture and a new vision processor. Improvements were made to the power system reducing the number of batteries required for operation from six to one. In previous years, a single state machine was used to execute the bulk of processing activities including sensor interfacing, data processing, path planning, navigation algorithms and motor control. This inefficient approach led to poor software performance and made it difficult to maintain or modify. For IGVC 2010, the team implemented a modular parallel architecture using the National Instruments (NI) LabVIEW programming language. The new architecture divides all the necessary tasks - motor control, navigation, sensor data collection, etc. into well-organized components that execute in parallel, providing considerable flexibility and facilitating efficient use of processing power. Computer vision is used to detect white lines on the ground and determine their location relative to the robot. With the new vision processor and some optimization of the image processing algorithm used last year, two frames can be acquired and processed in 70ms. With all these improvements, Q placed 2nd in the autonomous challenge.

Service oriented architecture assessment based on software components

Directory of Open Access Journals (Sweden)

Mahnaz Amirpour

2016-01-01

Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

OpenAIRE

Kofroň, Jan; Tumova, Jana

2017-01-01

These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

A State-Based Modeling Approach for Efficient Performance Evaluation of Embedded System Architectures at Transaction Level

Directory of Open Access Journals (Sweden)

Anthony Barreteau

2012-01-01

Full Text Available Abstract models are necessary to assist system architects in the evaluation process of hardware/software architectures and to cope with the still increasing complexity of embedded systems. Efficient methods are required to create reliable models of system architectures and to allow early performance evaluation and fast exploration of the design space. In this paper, we present a specific transaction level modeling approach for performance evaluation of hardware/software architectures. This approach relies on a generic execution model that exhibits light modeling effort. Created models are used to evaluate by simulation expected processing and memory resources according to various architectures. The proposed execution model relies on a specific computation method defined to improve the simulation speed of transaction level models. The benefits of the proposed approach are highlighted through two case studies. The first case study is a didactic example illustrating the modeling approach. In this example, a simulation speed-up by a factor of 7,62 is achieved by using the proposed computation method. The second case study concerns the analysis of a communication receiver supporting part of the physical layer of the LTE protocol. In this case study, architecture exploration is led in order to improve the allocation of processing functions.

Architecture of high reliable control systems using complex software

International Nuclear Information System (INIS)

Tallec, M.

1990-01-01

The problems involved by the use of complex softwares in control systems that must insure a very high level of safety are examined. The first part makes a brief description of the prototype of PROSPER system. PROSPER means protection system for nuclear reactor with high performances. It has been installed on a French nuclear power plant at the beginnning of 1987 and has been continually working since that time. This prototype is realized on a multi-processors system. The processors communicate between themselves using interruptions and protected shared memories. On each processor, one or more protection algorithms are implemented. Those algorithms use data coming directly from the plant and, eventually, data computed by the other protection algorithms. Each processor makes its own acquisitions from the process and sends warning messages if some operating anomaly is detected. All algorithms are activated concurrently on an asynchronous way. The results are presented and the safety related problems are detailed. - The second part is about measurements' validation. First, we describe how the sensors' measurements will be used in a protection system. Then, a proposal for a method based on the techniques of artificial intelligence (expert systems and neural networks) is presented. - The last part is about the problems of architectures of systems including hardware and software: the different types of redundancies used till now and a proposition of a multi-processors architecture which uses an operating system that is able to manage several tasks implemented on different processors, which verifies the good operating of each of those tasks and of the related processors and which allows to carry on the operation of the system, even in a degraded manner when a failure has been detected are detailed [fr

An extendible software architecture for next generation multi-material AM platforms : design and implementation of a Recipe Maker as test case of the software architecture

NARCIS (Netherlands)

Seifu, G.N.

2017-01-01

Additive manufacturing (AM) is the process of joining building material layer by layer to make a product from a three-dimensional digital representation. It is also commonly called 3D printing. This project provides a software architecture for next generation 3D printers. At its current status, the

A software architecture for adaptive modular sensing systems.

Science.gov (United States)

Lyle, Andrew C; Naish, Michael D

2010-01-01

By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration.

The ATLAS online High Level Trigger framework: Experience reusing offline software components in the ATLAS trigger

International Nuclear Information System (INIS)

Wiedenmann, Werner

2010-01-01

Event selection in the ATLAS High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The ATLAS High Level Trigger (HLT) framework based on the GAUDI and ATLAS ATHENA frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of ATLAS, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking periods with cosmic events and in a short period with proton beams from LHC. The contribution discusses the architectural aspects of the HLT framework, its performance and its software environment within the ATLAS computing, trigger and data flow projects. Emphasis is also put on the architectural implications for the software by the use of multi-core processors in the computing farms and the experiences gained with multi-threading and multi-process technologies.

High-level specification of a proposed information architecture for support of a bioterrorism early-warning system.

Science.gov (United States)

Berkowitz, Murray R

2013-01-01

Current information systems for use in detecting bioterrorist attacks lack a consistent, overarching information architecture. An overview of the use of biological agents as weapons during a bioterrorist attack is presented. Proposed are the design, development, and implementation of a medical informatics system to mine pertinent databases, retrieve relevant data, invoke appropriate biostatistical and epidemiological software packages, and automatically analyze these data. The top-level information architecture is presented. Systems requirements and functional specifications for this level are presented. Finally, future studies are identified.

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

A Software Architecture for Adaptive Modular Sensing Systems

Directory of Open Access Journals (Sweden)

Andrew C. Lyle

2010-08-01

Full Text Available By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration.

ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

Directory of Open Access Journals (Sweden)

Milan Eric

2010-12-01

Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

Architectural design decisions

NARCIS (Netherlands)

Jansen, Antonius Gradus Johannes

2008-01-01

A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly

Implementations of service oriented architecture and agile software development: What works and what are the challenges?

NARCIS (Netherlands)

Schramm, Milan; Daneva, Maia

2016-01-01

Today many organizations use service-oriented architecture and agile software development as their software paradigms. While both certainly have their advantages, in the fields of Empirical Software Engineering and Information Systems these have been treated in relative isolation and their impact on

A resilient and secure software platform and architecture for distributed spacecraft

Science.gov (United States)

Otte, William R.; Dubey, Abhishek; Karsai, Gabor

2014-06-01

A distributed spacecraft is a cluster of independent satellite modules flying in formation that communicate via ad-hoc wireless networks. This system in space is a cloud platform that facilitates sharing sensors and other computing and communication resources across multiple applications, potentially developed and maintained by different organizations. Effectively, such architecture can realize the functions of monolithic satellites at a reduced cost and with improved adaptivity and robustness. Openness of these architectures pose special challenges because the distributed software platform has to support applications from different security domains and organizations, and where information flows have to be carefully managed and compartmentalized. If the platform is used as a robust shared resource its management, configuration, and resilience becomes a challenge in itself. We have designed and prototyped a distributed software platform for such architectures. The core element of the platform is a new operating system whose services were designed to restrict access to the network and the file system, and to enforce resource management constraints for all non-privileged processes Mixed-criticality applications operating at different security labels are deployed and controlled by a privileged management process that is also pre-configuring all information flows. This paper describes the design and objective of this layer.

The Software Architecture of the LHCb High Level Trigger

CERN Multimedia

CERN. Geneva

2012-01-01

The LHCb experiment is a spectrometer dedicated to the study of heavy flavor at the LHC. The rate of proton-proton collisions at the LHC is 15 MHz, but disk space limitations mean that only 3 kHz can be written to tape for offline processing. For this reason the LHCb data acquisition system -- trigger -- plays a key role in selecting signal events and rejecting background. In contrast to previous experiments at hadron colliders like for example CDF or D0, the bulk of the LHCb trigger is implemented in software and deployed on a farm of 20k parallel processing nodes. This system, called the High Level Trigger (HLT) is responsible for reducing the rate from the maximum at which the detector can be read out, 1.1 MHz, to the 3 kHz which can be processed offline,and has 20 ms in which to process and accept/reject each event. In order to minimize systematic uncertainties, the HLT was designed from the outset to reuse the offline reconstruction and selection code, and is based around multiple independent and redunda...

An ontology-based approach for modelling architectural styles

OpenAIRE

Pahl, Claus; Giesecke, Simon; Hasselbring, Wilhelm

2007-01-01

peer-reviewed The conceptual modelling of software architectures is of central importance for the quality of a software system. A rich modelling language is required to integrate the different aspects of architecture modelling, such as architectural styles, structural and behavioural modelling, into a coherent framework.We propose an ontological approach for architectural style modelling based on description logic as an abstract, meta-level modelling instrument. Architect...

Software FMEA analysis for safety-related application software

International Nuclear Information System (INIS)

Park, Gee-Yong; Kim, Dong Hoon; Lee, Dong Young

2014-01-01

Highlights: • We develop a modified FMEA analysis suited for applying to software architecture. • A template for failure modes on a specific software language is established. • A detailed-level software FMEA analysis on nuclear safety software is presented. - Abstract: A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests

Software architecture for intelligent image processing using Prolog

Science.gov (United States)

Jones, Andrew C.; Batchelor, Bruce G.

1994-10-01

We describe a prototype system for interactive image processing using Prolog, implemented by the first author on an Apple Macintosh computer. This system is inspired by Prolog+, but differs from it in two particularly important respects. The first is that whereas Prolog+ assumes the availability of dedicated image processing hardware, with which the Prolog system communicates, our present system implements image processing functions in software using the C programming language. The second difference is that although our present system supports Prolog+ commands, these are implemented in terms of lower-level Prolog predicates which provide a more flexible approach to image manipulation. We discuss the impact of the Apple Macintosh operating system upon the implementation of the image-processing functions, and the interface between these functions and the Prolog system. We also explain how the Prolog+ commands have been implemented. The system described in this paper is a fairly early prototype, and we outline how we intend to develop the system, a task which is expedited by the extensible architecture we have implemented.

Software architecture for the ORNL large coil test facility data system

International Nuclear Information System (INIS)

Blair, E.T.; Baylor, L.R.

1986-01-01

The VAX based data acquisition system for the international fusion superconducting magnetic test facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is a second generation system that evolved from a PDP-11/60 based system used during the initial phase of facility testing. The VAX based software represents a layered implementation that provides integrated access to all of the data sources within the system, decoupling en-user data retrieval from various front-end data sources through a combination of software architecture and instrumentation data bases. Independent VAX processes manage the various front-end data sources, each being responsible for controlling, monitoring, acquiring, and disposing data and control parameters for access from the data retrieval software

Interface-based software integration

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2016-07-01

Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

Software quality assurance: in large scale and complex software-intensive systems

NARCIS (Netherlands)

Mistrik, I.; Soley, R.; Ali, N.; Grundy, J.; Tekinerdogan, B.

2015-01-01

Software Quality Assurance in Large Scale and Complex Software-intensive Systems presents novel and high-quality research related approaches that relate the quality of software architecture to system requirements, system architecture and enterprise-architecture, or software testing. Modern software

NUClear: A Loosely Coupled Software Architecture for Humanoid Robot Systems

Directory of Open Access Journals (Sweden)

Trent eHouliston

2016-04-01

Full Text Available This paper discusses the design and interface of NUClear, a new hybrid message-passing architecture for embodied humanoid robotics. NUClear is modular, low latency and promotes functional and expandable software design. It greatly reduces the latency for messages passed between modules as the messages routes are established at compile time. It also reduces the number of functions that must be written using a system called co-messages which aids in dealing with multiple simultaneous data. NUClear has primarily been evaluated on a humanoid robotic soccer platform and on a robotic boat platform, with evaluations showing that NUClear requires fewer callbacks and cache variables over existing message-passing architectures. NUClear does have limitations when applying these techniques on multi-processed systems. It performs best in lower power systems where computational resources are limited. Future work will focus on applying the architecture to new platforms, including a larger form humanoid platform and a virtual reality platform and further evaluating the impact of the novel techniques introduced.

Software Defined Networks in Wireless Sensor Architectures

Directory of Open Access Journals (Sweden)

Jesús Antonio Puente Fernández

2018-03-01

Full Text Available Nowadays, different protocols coexist in Internet that provides services to users. Unfortunately, control decisions and distributed management make it hard to control networks. These problems result in an inefficient and unpredictable network behaviour. Software Defined Networks (SDN is a new concept of network architecture. It intends to be more flexible and to simplify the management in networks with respect to traditional architectures. Each of these aspects are possible because of the separation of control plane (controller and data plane (switches in network devices. OpenFlow is the most common protocol for SDN networks that provides the communication between control and data planes. Moreover, the advantage of decoupling control and data planes enables a quick evolution of protocols and also its deployment without replacing data plane switches. In this survey, we review the SDN technology and the OpenFlow protocol and their related works. Specifically, we describe some technologies as Wireless Sensor Networks and Wireless Cellular Networks and how SDN can be included within them in order to solve their challenges. We classify different solutions for each technology attending to the problem that is being fixed.

Radiology systems architecture.

Science.gov (United States)

Deibel, S R; Greenes, R A

1996-05-01

This article focuses on the software requirements for enterprise integration in radiology. The needs of a future radiology systems architecture are examined, both at a concrete functional level and at an abstract system-properties level. A component-based approach to software development is described and is validated in the context of each of the abstract system requirements for future radiology computing environments.

Software Defined Networking Demands on Software Technologies

DEFF Research Database (Denmark)

Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

2015-01-01

Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

Interplay between requirements, software architecture, and hardware constraints in the development of a home control user interface

DEFF Research Database (Denmark)

Loft, M.S.; Nielsen, S.S.; Nørskov, Kim

2012-01-01

is to propose the hardware platform as a third Twin Peaks element that must be given attention in projects such as the one described in this paper. Specifically, we discuss how the presence of severe hardware constraints exacerbates making trade-offs between requirements and architecture.......We have developed a new graphical user interface for a home control device for a large industrial customer. In this industrial case study, we first present our approaches to requirements engineering and to software architecture; we also describe the given hardware platform. Then we make two...... contributions. Our first contribution is to provide a specific example of a real-world project in which a Twin Peaks-compliant approach to software development has been used, and to describe and discuss three examples of interplay between requirements and software architecture decisions. Our second contribution...

Proceedings of the First International Workshop on Automotive Software Architecture (WASA'15, Montreal, Canada, May 4, 2015)

NARCIS (Netherlands)

Kruchten, P.; Dajsuren, Y.; Altinger, H.; Staron, M.

2015-01-01

It is our great pleasure to welcome you to the First International Workshop on Automotive Software Architectures -- WASA'15. More than a decade ago, the term automotive software engineering was officially introduced in the software community addressing research challenges and technical issues

How do architecture patterns and tactics interact? A model and annotation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2010-01-01

Software architecture designers inevitably work with both architecture patterns and tactics. Architecture patterns describe the high-level structure and behavior of software systems as the solution to multiple system requirements, whereas tactics are design decisions that improve individual quality

Inferring Parametric Energy Consumption Functions at Different Software Levels

DEFF Research Database (Denmark)

Liqat, Umer; Georgiou, Kyriakos; Kerrison, Steve

2016-01-01

The static estimation of the energy consumed by program executions is an important challenge, which has applications in program optimization and verification, and is instrumental in energy-aware software development. Our objective is to estimate such energy consumption in the form of functions...... on the input data sizes of programs. We have developed a tool for experimentation with static analysis which infers such energy functions at two levels, the instruction set architecture (ISA) and the intermediate code (LLVM IR) levels, and reflects it upwards to the higher source code level. This required...... the development of a translation from LLVM IR to an intermediate representation and its integration with existing components, a translation from ISA to the same representation, a resource analyzer, an ISA-level energy model, and a mapping from this model to LLVM IR. The approach has been applied to programs...

Enterprise architecture patterns practical solutions for recurring IT-architecture problems

CERN Document Server

Perroud, Thierry

2013-01-01

Every enterprise architect faces similar problems when designing and governing the enterprise architecture of a medium to large enterprise. Design patterns are a well-established concept in software engineering, used to define universally applicable solution schemes. By applying this approach to enterprise architectures, recurring problems in the design and implementation of enterprise architectures can be solved over all layers, from the business layer to the application and data layer down to the technology layer.Inversini and Perroud describe patterns at the level of enterprise architecture

Initial validation of ATLAS software on the ARM architecture

Energy Technology Data Exchange (ETDEWEB)

Kawamura, Gen; Quadt, Arnulf; Smith, Joshua Wyatt [II. Physikalisches Institut, Georg-August Universitaet Goettingen (Germany); Seuster, Rolf [TRIUMF (Canada); Stewart, Graeme [University of Glasgow (United Kingdom)

2016-07-01

In the early 2000's the introduction of the multi-core era of computing helped industry and experiments such as ATLAS realize even more computing power. This was necessary as the limits of what a single-core processor could do where quickly being reached. Our current model of computing is to increase the number of multi-core nodes in a server farm in order to handle the increased influx of data. As power costs and our need for more computing power increase, this model will eventually become non-realistic. Once again a paradigm shift has to take place. One such option is to look at alternative architectures for large scale server farms. ARM processors are such an example. Making up approximately 95 % of the smartphone and tablet market these processors are widely available, very power conservative and constantly becoming faster. The ATLAS software code base (Athena) is extremely complex comprising of more than 6.5 million lines of code. It has very recently been ported to the ARM 64-bit architecture. The process of our port as well as the first validation plots are presented and compared to the traditional x86 architecture.

Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

OpenAIRE

Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

2013-01-01

These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

EAP high-level product architecture

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik; Sarban, Rahimullah

2013-01-01

EAP technology has the potential to be used in a wide range of applications. This poses the challenge to the EAP component manufacturers to develop components for a wide variety of products. Danfoss Polypower A/S is developing an EAP technology platform, which can form the basis for a variety...... of EAP technology products while keeping complexity under control. High level product architecture has been developed for the mechanical part of EAP transducers, as the foundation for platform development. A generic description of an EAP transducer forms the core of the high level product architecture...... the function of the EAP transducers to be changed, by basing the EAP transducers on a different combination of organ alternatives. A model providing an overview of the high level product architecture has been developed to support daily development and cooperation across development teams. The platform approach...

Connecting Architecture and Implementation

Science.gov (United States)

Buchgeher, Georg; Weinreich, Rainer

Software architectures are still typically defined and described independently from implementation. To avoid architectural erosion and drift, architectural representation needs to be continuously updated and synchronized with system implementation. Existing approaches for architecture representation like informal architecture documentation, UML diagrams, and Architecture Description Languages (ADLs) provide only limited support for connecting architecture descriptions and implementations. Architecture management tools like Lattix, SonarJ, and Sotoarc and UML-tools tackle this problem by extracting architecture information directly from code. This approach works for low-level architectural abstractions like classes and interfaces in object-oriented systems but fails to support architectural abstractions not found in programming languages. In this paper we present an approach for linking and continuously synchronizing a formalized architecture representation to an implementation. The approach is a synthesis of functionality provided by code-centric architecture management and UML tools and higher-level architecture analysis approaches like ADLs.

Softwarization of Mobile Network Functions towards Agile and Energy Efficient 5G Architectures: A Survey

Directory of Open Access Journals (Sweden)

Dlamini Thembelihle

2017-01-01

Full Text Available Future mobile networks (MNs are required to be flexible with minimal infrastructure complexity, unlike current ones that rely on proprietary network elements to offer their services. Moreover, they are expected to make use of renewable energy to decrease their carbon footprint and of virtualization technologies for improved adaptability and flexibility, thus resulting in green and self-organized systems. In this article, we discuss the application of software defined networking (SDN and network function virtualization (NFV technologies towards softwarization of the mobile network functions, taking into account different architectural proposals. In addition, we elaborate on whether mobile edge computing (MEC, a new architectural concept that uses NFV techniques, can enhance communication in 5G cellular networks, reducing latency due to its proximity deployment. Besides discussing existing techniques, expounding their pros and cons and comparing state-of-the-art architectural proposals, we examine the role of machine learning and data mining tools, analyzing their use within fully SDN- and NFV-enabled mobile systems. Finally, we outline the challenges and the open issues related to evolved packet core (EPC and MEC architectures.

Comparison of Learning Software Architecture by Developing Social Applications versus Games on the Android Platform

Directory of Open Access Journals (Sweden)

Bian Wu

2012-01-01

Full Text Available This paper describes an empirical study where the focus was on discovering differences and similarities in students working on development of social applications versus students working on development of games using the same Android development platform. In 2010-2011, students attending the software architecture course at the Norwegian University of Science and Technology (NTNU could choose between four types of projects. Independently of the chosen type of project, all students had to go through the same phases, produce the same documents based on the same templates, and follow exactly the same process. This study focuses on one of projects—Android project, to see how much the application domain affects the course project independently of the chosen technology. Our results revealed some positive effects for the students doing game development compared to social application development to learn software architecture, like motivated to work with games, a better focus on quality attributes such as modifiability and testability during the development, production of software architectures of higher complexity, and more productive coding working for the project. However, we did not find significant differences in awarded grade between students choosing the two different domains.

Intelligent web data management software architectures and emerging technologies

CERN Document Server

Ma, Kun; Yang, Bo; Sun, Runyuan

2016-01-01

This book presents some of the emerging techniques and technologies used to handle Web data management. Authors present novel software architectures and emerging technologies and then validate using experimental data and real world applications. The contents of this book are focused on four popular thematic categories of intelligent Web data management: cloud computing, social networking, monitoring and literature management. The Volume will be a valuable reference to researchers, students and practitioners in the field of Web data management, cloud computing, social networks using advanced intelligence tools.

A Software Architecture for Intelligent Synthesis Environments

Science.gov (United States)

Filman, Robert E.; Norvig, Peter (Technical Monitor)

2001-01-01

The NASA's Intelligent Synthesis Environment (ISE) program is a grand attempt to develop a system to transform the way complex artifacts are engineered. This paper discusses a "middleware" architecture for enabling the development of ISE. Desirable elements of such an Intelligent Synthesis Architecture (ISA) include remote invocation; plug-and-play applications; scripting of applications; management of design artifacts, tools, and artifact and tool attributes; common system services; system management; and systematic enforcement of policies. This paper argues that the ISA extend conventional distributed object technology (DOT) such as CORBA and Product Data Managers with flexible repositories of product and tool annotations and "plug-and-play" mechanisms for inserting "ility" or orthogonal concerns into the system. I describe the Object Infrastructure Framework, an Aspect Oriented Programming (AOP) environment for developing distributed systems that provides utility insertion and enables consistent annotation maintenance. This technology can be used to enforce policies such as maintaining the annotations of artifacts, particularly the provenance and access control rules of artifacts-, performing automatic datatype transformations between representations; supplying alternative servers of the same service; reporting on the status of jobs and the system; conveying privileges throughout an application; supporting long-lived transactions; maintaining version consistency; and providing software redundancy and mobility.

Algorithms and Software Architecture for the Production of DEM Data From LIDAR, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Diamond Data Systems (DDS) proposes the development of a new, advanced architecture, algorithms and software to support the end-to-end processing of LIDAR data to...

Lightning talk slide for "SLACKHA: Software Library for Accelerating Chemical Kinetics on Hybrid Architectures"

OpenAIRE

Niemeyer, Kyle; Sung, Chih-Jen

2018-01-01

Lightning talk slide describing the "SLACKHA: Software Library for Accelerating Chemical Kinetics on Hybrid Architectures" project at the 2018 NSF SI2 PI meeting: https://si2-pi-community.github.io/2018-meeting/

Architecture Sustainability

NARCIS (Netherlands)

Avgeriou, Paris; Stal, Michael; Hilliard, Rich

2013-01-01

Software architecture is the foundation of software system development, encompassing a system's architects' and stakeholders' strategic decisions. A special issue of IEEE Software is intended to raise awareness of architecture sustainability issues and increase interest and work in the area. The

SecureCore Software Architecture: Trusted Path Application (TPA) Requirements

National Research Council Canada - National Science Library

Clark, Paul C; Irvine, Cynthia E; Levin, Timothy E; Nguyen, Thuy D; Vidas, Timothy M

2007-01-01

.... A high-level architecture is described to provide such features. In addition, a usage scenario is described for a potential use of the architecture, with emphasis on the trusted path, a non-spoofable user interface to the trusted components of the system. Detailed requirements for the trusted path are provided.

A flexible software architecture for scalable real-time image and video processing applications

Science.gov (United States)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2012-06-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility because they are normally oriented towards particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse and inefficient execution on multicore processors. This paper presents a novel software architecture for real-time image and video processing applications which addresses these issues. The architecture is divided into three layers: the platform abstraction layer, the messaging layer, and the application layer. The platform abstraction layer provides a high level application programming interface for the rest of the architecture. The messaging layer provides a message passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of messages. The application layer provides a repository for reusable application modules designed for real-time image and video processing applications. These modules, which include acquisition, visualization, communication, user interface and data processing modules, take advantage of the power of other well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, we present different prototypes and applications to show the possibilities of the proposed architecture.

Continuous software engineering – a microservices architecture perspective

OpenAIRE

O'Connor, Rory; Elger, Peter; Clarke, Paul

2017-01-01

From its earliest days, software development has been beset with challenges in relation to timely delivery, appropriateness of features and quality of deliverables. Many advances in software development processes have helped to address these concerns. For example, agile software development has helped to deliver working software more frequently and capability maturity frameworks have brought about improved consistency in quality levels. However, the age-old challenge of better, cheaper, faste...

A Multi-Time Scale Morphable Software Milieu for Polymorphous Computing Architectures (PCA) - Composable, Scalable Systems

National Research Council Canada - National Science Library

Skjellum, Anthony

2004-01-01

Polymorphous Computing Architectures (PCA) rapidly "morph" (reorganize) software and hardware configurations in order to achieve high performance on computation styles ranging from specialized streaming to general threaded applications...

Multi-Level Formation of Complex Software Systems

Directory of Open Access Journals (Sweden)

Hui Li

2016-05-01

Full Text Available We present a multi-level formation model for complex software systems. The previous works extract the software systems to software networks for further studies, but usually investigate the software networks at the class level. In contrast to these works, our treatment of software systems as multi-level networks is more realistic. In particular, the software networks are organized by three levels of granularity, which represents the modularity and hierarchy in the formation process of real-world software systems. More importantly, simulations based on this model have generated more realistic structural properties of software networks, such as power-law, clustering and modularization. On the basis of this model, how the structure of software systems effects software design principles is then explored, and it could be helpful for understanding software evolution and software engineering practices.

Evaluation of software architecture using fuzzy colored Petri nets

Directory of Open Access Journals (Sweden)

Vahid Abroshan

2013-02-01

Full Text Available Software Architecture (SA is one of the most important artifacts for life cycle of a software system because it incorporates some important decisions and principles for the system development. On the other hand, developing the systems based on uncertain and ambiguous requirement has been increased, significantly. Therefore, there have been significant attentions on SA requirements. In this paper, we present a new method for evaluation of performance characteristics based on a use case, response time, and queue length of SA. Since there are some ambiguities associated with considered systems, we use the idea of Fuzzy UML (F-UML diagrams. In addition, these diagrams have been enriched with performance annotations using proposed Fuzzy-SPT sub profile, the extended version of SPT profile proposed by OMG. Then, these diagrams are mapped into an executable model based on Fuzzy Colored Petri Nets (FCPN and finally the performance metrics are calculated using the proposed algorithms. We have implemented CPN-Tools for creating and evaluating the FCPN model.

Trust-Based and Context-Aware Authentication in a Software Architecture for Context and Proximity-Aware Services

Science.gov (United States)

Lenzini, Gabriele

We describe an existing software architecture for context and proximity aware services that enables trust-based and context-aware authentication. A service is proximity aware when it automatically detects the presence of entities in its proximity. Authentication is context-aware when it uses contextual information to discern among different identities and to evaluate to which extent they are authentic. The software architecture that we describe here is functioning in our Institute: It manages a sensor network to detect the presence and location of users and their devices. A context manager is responsible to merge the different sources of contextual information, to solve potential contradictions, and to determine the level of authentication of the identity of the person approaching one of the services offered in the coffee-break corners of our Institute. In our solution for context-aware authentication, sensors are managed as if they were recommenders having subjective belief, disbelief, and uncertainty (i.e., trust) on the position and identity of users. A sensor’s subjective trust depends on what it has been sensing in the environment. We discuss the results of an array of simulations that we conducted to validate our concept of trust-based and context-aware authentication. We use Subjective Logic to manage trust.

Security patterns in practice designing secure architectures using software patterns

CERN Document Server

Fernandez-Buglioni, Eduardo

2013-01-01

Learn to combine security theory and code to produce secure systems Security is clearly a crucial issue to consider during the design and implementation of any distributed software architecture. Security patterns are increasingly being used by developers who take security into serious consideration from the creation of their work. Written by the authority on security patterns, this unique book examines the structure and purpose of security patterns, illustrating their use with the help of detailed implementation advice, numerous code samples, and descriptions in UML. Provides

AREA EFFICIENT FRACTIONAL SAMPLE RATE CONVERSION ARCHITECTURE FOR SOFTWARE DEFINED RADIOS

Directory of Open Access Journals (Sweden)

Latha Sahukar

2014-09-01

Full Text Available The modern software defined radios (SDRs use complex signal processing algorithms to realize efficient wireless communication schemes. Several such algorithms require a specific symbol to sample ratio to be maintained. In this context the fractional rate converter (FRC becomes a crucial block in the receiver part of SDR. The paper presents an area optimized dynamic FRC block, for low power SDR applications. The limitations of conventional cascaded interpolator and decimator architecture for FRC are also presented. Extending the SINC function interpolation based architecture; towards high area optimization and providing run time configuration with time register are presented. The area and speed analysis are carried with Xilinx FPGA synthesis tools. Only 15% area occupancy with maximum clock speed of 133 MHz are reported on Spartan-6 Lx45 Field Programmable Gate Array (FPGA.

Software for the LHCb experiment

CERN Document Server

Corti, Gloria; Belyaev, Ivan; Cattaneo, Marco; Charpentier, Philippe; Frank, Markus; Koppenburg, Patrick; Mato-Vila, P; Ranjard, Florence; Roiser, Stefan

2006-01-01

LHCb is an experiment for precision measurements of CP-violation and rare decays in B mesons at the LHC collider at CERN. The LHCb software development strategy follows an architecture-centric approach as a way of creating a resilient software framework that can withstand changes in requirements and technology over the expected long lifetime of the experiment. The software architecture, called GAUDI, supports event data processing applications that run in different processing environments ranging from the real-time high- level triggers in the online system to the final physics analysis performed by more than one hundred physicists. The major architectural design choices and the arguments that lead to these choices will be outlined. Object oriented technologies have been used throughout. Initially developed for the LHCb experiment, GAUDI has been adopted and extended by other experiments. Several iterations of the GAUDI software framework have been released and are now being used routinely by the physicists of...

Developing Distributed System With Service Resource Oriented Architecture

Directory of Open Access Journals (Sweden)

Hermawan Hermawan

2012-06-01

Full Text Available Service Oriented Architecture is a design paradigm in software engineering with which a distributed system is built for an enterprise. This paradigm aims at providing the system as a service through a protocol in web service technology, namely Simple Object Access Protocol (SOAP. However, SOA is service level agreements of webservice. For this reason, this reasearch aims at combining SOA with Resource Oriented Architecture in order to expand scalability of services. This combination creates Sevice Resource Oriented Architecture (SROA with which a distributed system is developed that integrates services within project management software. Following this design, the software is developed according to a framework of Agile Model Driven Development which can reduce complexities of the whole process of software development.

An Internet of Things Generic Reference Architecture

DEFF Research Database (Denmark)

Bhalerao, Dipashree M.; Riaz, Tahir; Madsen, Ole Brun

2013-01-01

Internet of things Network is a future application of Internet. This network has three major basic blocks as business process or Application, core network or internetwork and peripheral network as Things or objects. The assembly has the basic intention of connecting all physical and virtual things......, and keeping track of all these things for monitoring and controlling some information. IoT architecture is studied from software architecture, overall system architecture and network architecture point of view. Paper puts forward the requirements of software architecture along with, its component...... and deployment diagram, process and interface diagram at abstract level. Paper proposes the abstract generic IoT reference and concrete abstract generic IoT reference architectures. Network architecture is also put up as a state of the art. Paper shortly gives overviews of protocols used for IoT. Some...

Re-usable templates for documenting the elaboration and architectural design of the CMS software

International Nuclear Information System (INIS)

Wellisch, J.P.; Tuura, L.

2001-01-01

Modern standards and definitions of deliverables for software development are provided by various standards like PSS-05, CMMI, ECSS, Volere, Rational Unified process or SPICE (ISO 15504). Modern document templates and the corresponding documents are based on atomic shells that cross-link, and can be subsequently assembled into a set of complete documents; views of the information in the shells. This makes the information easy to maintain, and enables selective views of the documentation. The authors will present a catalogue of document templates that has been developed in the context of the CMS CAFE forum, as well as their cross-linkage, using UML as the modelling language. The templates allow for documenting the elaboration and architectural design phases of software development. They can be used as the basis for establishing and documenting architecture, while establishing trace-ability to use-cases, requirements, constraints, and important technological choices in a maintainable manner

A Reference Architecture for Providing Tools as a Service to Support Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef

2014-01-01

-computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

OS Friendly Microprocessor Architecture

Science.gov (United States)

2017-04-01

NOTES Patrick La Fratta is now affiliated with Micron Technology, Inc., Boise, Idaho. 14. ABSTRACT We present an introduction to the patented ...Operating System Friendly Microprocessor Architecture (OSFA). The software framework to support the hardware-level security features is currently patent ...Army is assignee. OS Friendly Microprocessor Architecture. United States Patent 9122610. 2015 Sep. 2. Jungwirth P, inventor; US Army is assignee

Freight Advanced Traveler Information System (FRATIS) Dallas-Fort Worth : software architecture design and implementation options.

Science.gov (United States)

2013-05-01

This document describes the Software Architecture Design and Implementation Options for FRATIS : system. The demonstration component of this task will serve to test the technical feasibility of the : FRATIS prototype while also facilitating the colle...

Conception and validation software tools for the level 0 muon trigger of LHCb

International Nuclear Information System (INIS)

Aslanides, E.; Cachemiche, J. P.; Cogan, J.; Duval, P. Y.; Le Gac, R.; Hachon, F.; Leroy, O.; Liotard, P. L.; Marin, F.; Tsaregorodtsev, A.

2009-01-01

The Level-0 muon trigger processor of the LHCb experiment looks for straight particles crossing muon detector and measures their transverse momentum. It processes 40*10 6 proton-proton collisions per second. The tracking uses a road algorithm relying on the projectivity of the muon detector (the logical layout in the 5 muon station is projective in y to the interaction point and it is also projective in x when the bending in the horizontal direction introduced by the magnetic field is ignored). The architecture of the Level-0 muon trigger is complex with a dense network of data interconnections. The design and validation of such an intricate system has only been possible with intense use of software tools for the detector simulation, the modelling of the hardware components behaviour and the validation. A database describing the data-flow is the corner stone between the software and hardware components. (authors)

Considerations for control system software verification and validation specific to implementations using distributed processor architectures

International Nuclear Information System (INIS)

Munro, J.K. Jr.

1993-01-01

Until recently, digital control systems have been implemented on centralized processing systems to function in one of several ways: (1) as a single processor control system; (2) as a supervisor at the top of a hierarchical network of multiple processors; or (3) in a client-server mode. Each of these architectures uses a very different set of communication protocols. The latter two architectures also belong to the category of distributed control systems. Distributed control systems can have a central focus, as in the cases just cited, or be quite decentralized in a loosely coupled, shared responsibility arrangement. This last architecture is analogous to autonomous hosts on a local area network. Each of the architectures identified above will have a different set of architecture-associated issues to be addressed in the verification and validation activities during software development. This paper summarizes results of efforts to identify, describe, contrast, and compare these issues

Software defined radio (SDR) architecture for concurrent multi-satellite communications

Science.gov (United States)

Maheshwarappa, Mamatha R.

SDRs have emerged as a viable approach for space communications over the last decade by delivering low-cost hardware and flexible software solutions. The flexibility introduced by the SDR concept not only allows the realisation of concurrent multiple standards on one platform, but also promises to ease the implementation of one communication standard on differing SDR platforms by signal porting. This technology would facilitate implementing reconfigurable nodes for parallel satellite reception in Mobile/Deployable Ground Segments and Distributed Satellite Systems (DSS) for amateur radio/university satellite operations. This work outlines the recent advances in embedded technologies that can enable new communication architectures for concurrent multi-satellite or satellite-to-ground missions where multi-link challenges are associated. This research proposes a novel concept to run advanced parallelised SDR back-end technologies in a Commercial-Off-The-Shelf (COTS) embedded system that can support multi-signal processing for multi-satellite scenarios simultaneously. The initial SDR implementation could support only one receiver chain due to system saturation. However, the design was optimised to facilitate multiple signals within the limited resources available on an embedded system at any given time. This was achieved by providing a VHDL solution to the existing Python and C/C++ programming languages along with parallelisation so as to accelerate performance whilst maintaining the flexibility. The improvement in the performance was validated at every stage through profiling. Various cases of concurrent multiple signals with different standards such as frequency (with Doppler effect) and symbol rates were simulated in order to validate the novel architecture proposed in this research. Also, the architecture allows the system to be reconfigurable by providing the opportunity to change the communication standards in soft real-time. The chosen COTS solution provides a

Designing Scientific Software for Heterogeneous Computing

DEFF Research Database (Denmark)

Glimberg, Stefan Lemvig

, algorithms and data structures must be designed to utilize the underlying parallel architecture. The architectural changes in hardware design within the last decade, from single to multi and many-core architectures, require software developers to identify and properly implement methods that both exploit...... makes parallel software design applicable, but also a challenge for scientific software developers at all levels. We have developed a generic C++ library for fast prototyping of large-scale PDEs solvers based on flexible-order finite difference approximations on structured regular grids. The library...... is designed with a high abstraction interface to improve developer productivity. The library is based on modern template-based design concepts as described in Glimberg, Engsig-Karup, Nielsen & Dammann (2013). The library utilizes heterogeneous CPU/GPU environments in order to maximize computational throughput...

Architecture and Implementation of OpenPET Firmware and Embedded Software

International Nuclear Information System (INIS)

Abu-Nimeh, Faisal T.; Ito, Jennifer; Moses, William W.; Peng, Qiyu; Choong, Woon-Seng

2016-01-01

OpenPET is an open source, modular, extendible, and high-performance platform suitable for multi-channel data acquisition and analysis. Due to the versatility of the hardware, firmware, and software architectures, the platform is capable of interfacing with a wide variety of detector modules not only in medical imaging but also in homeland security applications. Analog signals from radiation detectors share similar characteristics-a pulse whose area is proportional to the deposited energy and whose leading edge is used to extract a timing signal. As a result, a generic design method of the platform is adopted for the hardware, firmware, and software architectures and implementations. The analog front-end is hosted on a module called a Detector Board, where each board can filter, combine, timestamp, and process multiple channels independently. The processed data is formatted and sent through a backplane bus to a module called Support Board, where 1 Support Board can host up to eight Detector Board modules. The data in the Support Board, coming from 8 Detector Board modules, can be aggregated or correlated (if needed) depending on the algorithm implemented or runtime mode selected. It is then sent out to a computer workstation for further processing. The number of channels (detector modules), to be processed, mandates the overall OpenPET System Configuration, which is designed to handle up to 1,024 channels using 16-channel Detector Boards in the Standard System Configuration and 16,384 channels using 32-channel Detector Boards in the Large System Configuration.

A computer architecture for intelligent machines

Science.gov (United States)

Lefebvre, D. R.; Saridis, G. N.

1992-01-01

The theory of intelligent machines proposes a hierarchical organization for the functions of an autonomous robot based on the principle of increasing precision with decreasing intelligence. An analytic formulation of this theory using information-theoretic measures of uncertainty for each level of the intelligent machine has been developed. The authors present a computer architecture that implements the lower two levels of the intelligent machine. The architecture supports an event-driven programming paradigm that is independent of the underlying computer architecture and operating system. Execution-level controllers for motion and vision systems are briefly addressed, as well as the Petri net transducer software used to implement coordination-level functions. A case study illustrates how this computer architecture integrates real-time and higher-level control of manipulator and vision systems.

Method for critical software event execution reliability in high integrity software

Energy Technology Data Exchange (ETDEWEB)

Kidd, M.E. [Sandia National Labs., Albuquerque, NM (United States)

1997-11-01

This report contains viewgraphs on a method called SEER, which provides a high level of confidence that critical software driven event execution sequences faithfully exceute in the face of transient computer architecture failures in both normal and abnormal operating environments.

Software structure for tritium-in-air monitoring in classified locations

International Nuclear Information System (INIS)

Ionete, Eusebiu Ilarian; Benchea, Dumitru

2009-01-01

Full text: In the working areas of heavy water detritiation facilities, were hydrogen gas is generated, the risk of air-hydrogen explosive mixture production is present. This paper gives the description of a software architecture solution for a fixed area tritium-in-air monitoring system suitable to be used in such hazardous locations. Tritium-in-air monitoring system was designed as a distributed system containing a number of fixed tritium in air monitoring units, each of them being composed of an ionisation chamber flow-through type and a fix sampling unit with a number of sample lines and one additional blow line. For each unit, software and hardware architecture structure enable independent performance with a fail-safe concept, remote control operation and data storage in a DCS-DCU module. This software architecture secures the setting possibility of alarm levels for tritium concentration, graphical visualisation and acoustic alarm in the case of level overtaking. The afferent software architecture contains applications in connection with hardware architecture and with a hydrogen detection system: RU-1 software application for control sampling; RU-2 software application for measured values display; RU-3 software application for remote data display; RU-4 software application for SQL conversion server; RU-5 software application for OPC standard conversion. The interconnection of all hardware components, between each PLC and each display unit, between tritium-in-air monitoring units and PLC sampling units will be internally carried out using interfaces. The interconnection between PLCs and tritium-in-air monitoring DCU will be made using a communication network, for instance Ethernet Profibus or RS 485. (authors)

Architectural prototyping

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

2004-01-01

A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

Reference Architecture for Multi-Layer Software Defined Optical Data Center Networks

Directory of Open Access Journals (Sweden)

Casimer DeCusatis

2015-09-01

Full Text Available As cloud computing data centers grow larger and networking devices proliferate; many complex issues arise in the network management architecture. We propose a framework for multi-layer; multi-vendor optical network management using open standards-based software defined networking (SDN. Experimental results are demonstrated in a test bed consisting of three data centers interconnected by a 125 km metropolitan area network; running OpenStack with KVM and VMW are components. Use cases include inter-data center connectivity via a packet-optical metropolitan area network; intra-data center connectivity using an optical mesh network; and SDN coordination of networking equipment within and between multiple data centers. We create and demonstrate original software to implement virtual network slicing and affinity policy-as-a-service offerings. Enhancements to synchronous storage backup; cloud exchanges; and Fibre Channel over Ethernet topologies are also discussed.

DSP Architecture Design Essentials

CERN Document Server

Marković, Dejan

2012-01-01

In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.

TOGAF usage in outsourcing of software development

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2013-12-01

Full Text Available TOGAF is an Enterprise Architecture framework that provides a method for developing Enterprise Architecture called architecture development method (ADM. The purpose of this paper is whether TOGAF ADM can be used for developing software application architecture. Because the software application architecture is one of the disciplines in application development life cycle, it is important to find out how the enterprise architecture development method can support the application architecture development. Having an open standard that can be used in the application architecture development could help in outsourcing of software development. If ADM could be used for software application architecture development, then we could consider its usability in outsourcing of software development.

Practical, redundant, failure-tolerant, self-reconfiguring embedded system architecture

Science.gov (United States)

Klarer, Paul R.; Hayward, David R.; Amai, Wendy A.

2006-10-03

This invention relates to system architectures, specifically failure-tolerant and self-reconfiguring embedded system architectures. The invention provides both a method and architecture for redundancy. There can be redundancy in both software and hardware for multiple levels of redundancy. The invention provides a self-reconfiguring architecture for activating redundant modules whenever other modules fail. The architecture comprises: a communication backbone connected to two or more processors and software modules running on each of the processors. Each software module runs on one processor and resides on one or more of the other processors to be available as a backup module in the event of failure. Each module and backup module reports its status over the communication backbone. If a primary module does not report, its backup module takes over its function. If the primary module becomes available again, the backup module returns to its backup status.

DigR: a generic model and its open source simulation software to mimic three-dimensional root-system architecture diversity.

Science.gov (United States)

Barczi, Jean-François; Rey, Hervé; Griffon, Sébastien; Jourdan, Christophe

2018-04-18

Many studies exist in the literature dealing with mathematical representations of root systems, categorized, for example, as pure structure description, partial derivative equations or functional-structural plant models. However, in these studies, root architecture modelling has seldom been carried out at the organ level with the inclusion of environmental influences that can be integrated into a whole plant characterization. We have conducted a multidisciplinary study on root systems including field observations, architectural analysis, and formal and mathematical modelling. This integrative and coherent approach leads to a generic model (DigR) and its software simulator. Architecture analysis applied to root systems helps at root type classification and architectural unit design for each species. Roots belonging to a particular type share dynamic and morphological characteristics which consist of topological and geometric features. The DigR simulator is integrated into the Xplo environment, with a user interface to input parameter values and make output ready for dynamic 3-D visualization, statistical analysis and saving to standard formats. DigR is simulated in a quasi-parallel computing algorithm and may be used either as a standalone tool or integrated into other simulation platforms. The software is open-source and free to download at http://amapstudio.cirad.fr/soft/xplo/download. DigR is based on three key points: (1) a root-system architectural analysis, (2) root type classification and modelling and (3) a restricted set of 23 root type parameters with flexible values indexed in terms of root position. Genericity and botanical accuracy of the model is demonstrated for growth, branching, mortality and reiteration processes, and for different root architectures. Plugin examples demonstrate the model's versatility at simulating plastic responses to environmental constraints. Outputs of the model include diverse root system structures such as tap

Software architecture for a multi-purpose real-time control unit for research purposes

Science.gov (United States)

Epple, S.; Jung, R.; Jalba, K.; Nasui, V.

2017-05-01

A new, freely programmable, scalable control system for academic research purposes was developed. The intention was, to have a control unit capable of handling multiple PT1000 temperature sensors at reasonable accuracy and temperature range, as well as digital input signals and providing powerful output signals. To take full advantage of the system, control-loops are run in real time. The whole eight bit system with very limited memory runs independently of a personal computer. The two on board RS232 connectors allow to connect further units or to connect other equipment, as required in real time. This paper describes the software architecture for the third prototype that now provides stable measurements and an improvement in accuracy compared to the previous designs. As test case a thermal solar system to produce hot tap water and assist heating in a single-family house was implemented. The solar fluid pump was power-controlled and several temperatures at different points in the hydraulic system were measured and used in the control algorithms. The software architecture proved suitable to test several different control strategies and their corresponding algorithms for the thermal solar system.

A novel software architecture for the provision of context-aware semantic transport information.

Science.gov (United States)

Moreno, Asier; Perallos, Asier; López-de-Ipiña, Diego; Onieva, Enrique; Salaberria, Itziar; Masegosa, Antonio D

2015-05-26

The effectiveness of Intelligent Transportation Systems depends largely on the ability to integrate information from diverse sources and the suitability of this information for the specific user. This paper describes a new approach for the management and exchange of this information, related to multimodal transportation. A novel software architecture is presented, with particular emphasis on the design of the data model and the enablement of services for information retrieval, thereby obtaining a semantic model for the representation of transport information. The publication of transport data as semantic information is established through the development of a Multimodal Transport Ontology (MTO) and the design of a distributed architecture allowing dynamic integration of transport data. The advantages afforded by the proposed system due to the use of Linked Open Data and a distributed architecture are stated, comparing it with other existing solutions. The adequacy of the information generated in regard to the specific user's context is also addressed. Finally, a working solution of a semantic trip planner using actual transport data and running on the proposed architecture is presented, as a demonstration and validation of the system.

A Novel Software Architecture for the Provision of Context-Aware Semantic Transport Information

Directory of Open Access Journals (Sweden)

Asier Moreno

2015-05-01

Full Text Available The effectiveness of Intelligent Transportation Systems depends largely on the ability to integrate information from diverse sources and the suitability of this information for the specific user. This paper describes a new approach for the management and exchange of this information, related to multimodal transportation. A novel software architecture is presented, with particular emphasis on the design of the data model and the enablement of services for information retrieval, thereby obtaining a semantic model for the representation of transport information. The publication of transport data as semantic information is established through the development of a Multimodal Transport Ontology (MTO and the design of a distributed architecture allowing dynamic integration of transport data. The advantages afforded by the proposed system due to the use of Linked Open Data and a distributed architecture are stated, comparing it with other existing solutions. The adequacy of the information generated in regard to the specific user’s context is also addressed. Finally, a working solution of a semantic trip planner using actual transport data and running on the proposed architecture is presented, as a demonstration and validation of the system.

Information Integration Architecture Development

OpenAIRE

Faulkner, Stéphane; Kolp, Manuel; Nguyen, Duy Thai; Coyette, Adrien; Do, Thanh Tung; 16th International Conference on Software Engineering and Knowledge Engineering

2004-01-01

Multi-Agent Systems (MAS) architectures are gaining popularity for building open, distributed, and evolving software required by systems such as information integration applications. Unfortunately, despite considerable work in software architecture during the last decade, few research efforts have aimed at truly defining patterns and languages for designing such multiagent architectures. We propose a modern approach based on organizational structures and architectural description lan...

A Formal Approach to Software Architecture

National Research Council Canada - National Science Library

Allen, Robert

1997-01-01

.... While architectural concepts are often embodied in infrastructure to support specific architectural styles and in the initial conceptualization of a system configuration, the lack of an explicit...

Guidance and Navigation Software Architecture Design for the Autonomous Multi-Agent Physically Interacting Spacecraft (AMPHIS) Test Bed

National Research Council Canada - National Science Library

Eikenberry, Blake D

2006-01-01

.... This thesis contributes to this on-going research by addressing the development of the software architecture for the AMPHIS spacecraft simulator robots and the implementation of a Light Detection and Ranging (LIDAR...

The Architecture of the CMS Level-1 Trigger Control and Monitoring System

CERN Document Server

Magrans de Abril, Marc; Hammer, Josef; Hartl, Christian; Xie, Zhen

2011-01-01

The architecture of the Level-1 Trigger Control and Monitoring system for the CMS experiment is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking at the LHC. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time.

Towards multi-platform software architecture for Collaborative Teleoperation

Science.gov (United States)

Domingues, Christophe; Otmane, Samir; Davesne, Frederic; Mallem, Malik

2009-03-01

Augmented Reality (AR) can provide to a Human Operator (HO) a real help in achieving complex tasks, such as remote control of robots and cooperative teleassistance. Using appropriate augmentations, the HO can interact faster, safer and easier with the remote real world. In this paper, we present an extension of an existing distributed software and network architecture for collaborative teleoperation based on networked human-scaled mixed reality and mobile platform. The first teleoperation system was composed by a VR application and a Web application. However the 2 systems cannot be used together and it is impossible to control a distant robot simultaneously. Our goal is to update the teleoperation system to permit a heterogeneous collaborative teleoperation between the 2 platforms. An important feature of this interface is based on the use of different Virtual Reality platforms and different Mobile platforms to control one or many robots.

Towards multi-platform software architecture for Collaborative Teleoperation

International Nuclear Information System (INIS)

Domingues, Christophe; Otmane, Samir; Davesne, Frederic; Mallem, Malik

2009-01-01

Augmented Reality (AR) can provide to a Human Operator (HO) a real help in achieving complex tasks, such as remote control of robots and cooperative teleassistance. Using appropriate augmentations, the HO can interact faster, safer and easier with the remote real world. In this paper, we present an extension of an existing distributed software and network architecture for collaborative teleoperation based on networked human-scaled mixed reality and mobile platform. The first teleoperation system was composed by a VR application and a Web application. However the 2 systems cannot be used together and it is impossible to control a distant robot simultaneously. Our goal is to update the teleoperation system to permit a heterogeneous collaborative teleoperation between the 2 platforms. An important feature of this interface is based on the use of different Virtual Reality platforms and different Mobile platforms to control one or many robots.

BLAST in Gid (BiG): A Grid-Enabled Software Architecture and Implementation of Parallel and Sequential BLAST

International Nuclear Information System (INIS)

Aparicio, G.; Blanquer, I.; Hernandez, V.; Segrelles, D.

2007-01-01

The integration of High-performance computing tools is a key issue in biomedical research. Many computer-based applications have been migrated to High-Performance computers to deal with their computing and storage needs such as BLAST. However, the use of clusters and computing farm presents problems in scalability. The use of a higher layer of parallelism that splits the task into highly independent long jobs that can be executed in parallel can improve the performance maintaining the efficiency. Grid technologies combined with parallel computing resources are an important enabling technology. This work presents a software architecture for executing BLAST in a International Grid Infrastructure that guarantees security, scalability and fault tolerance. The software architecture is modular an adaptable to many other high-throughput applications, both inside the field of bio computing and outside. (Author)

Software Architecture Evolution

Science.gov (United States)

2013-12-01

system’s major components occurring via a Java Message Service message bus [69]. This architecture was designed to promote loose coupling of soft- ware...play reconfiguration of the system. The components were Java -based and platform-independent; the interfaces by which they communicated were based on...The MPCS database, a MySQL database used for storing telemetry as well as some other information, such as logs and commanding data [68]. This

Software Architecture to Support the Evolution of the ISRU RESOLVE Engineering Breadboard Unit 2 (EBU2)

Science.gov (United States)

Moss, Thomas; Nurge, Mark; Perusich, Stephen

2011-01-01

The In-Situ Resource Utilization (ISRU) Regolith & Environmental Science and Oxygen & Lunar Volatiles Extraction (RESOLVE) software provides operation of the physical plant from a remote location with a high-level interface that can access and control the data from external software applications of other subsystems. This software allows autonomous control over the entire system with manual computer control of individual system/process components. It gives non-programmer operators the capability to easily modify the high-level autonomous sequencing while the software is in operation, as well as the ability to modify the low-level, file-based sequences prior to the system operation. Local automated control in a distributed system is also enabled where component control is maintained during the loss of network connectivity with the remote workstation. This innovation also minimizes network traffic. The software architecture commands and controls the latest generation of RESOLVE processes used to obtain, process, and quantify lunar regolith. The system is grouped into six sub-processes: Drill, Crush, Reactor, Lunar Water Resource Demonstration (LWRD), Regolith Volatiles Characterization (RVC) (see example), and Regolith Oxygen Extraction (ROE). Some processes are independent, some are dependent on other processes, and some are independent but run concurrently with other processes. The first goal is to analyze the volatiles emanating from lunar regolith, such as water, carbon monoxide, carbon dioxide, ammonia, hydrogen, and others. This is done by heating the soil and analyzing and capturing the volatilized product. The second goal is to produce water by reducing the soil at high temperatures with hydrogen. This is done by raising the reactor temperature in the range of 800 to 900 C, causing the reaction to progress by adding hydrogen, and then capturing the water product in a desiccant bed. The software needs to run the entire unit and all sub-processes; however

The Use of Open Source Software for Open Architecture System on CNC Milling Machine

Directory of Open Access Journals (Sweden)

Dalmasius Ganjar Subagio

2012-03-01

Full Text Available Computer numerical control (CNC milling machine system cannot be separated from the software required to follow the provisions of the Open Architecture capabilities that have portability, extend ability, interoperability, and scalability. When a prescribed period of a CNC milling machine has passed and the manufacturer decided to discontinue it, then the user will have problems for maintaining the performance of the machine. This paper aims to show that the using of open source software (OSS is the way out to maintain engine performance. With the use of OSS, users no longer depend on the software built by the manufacturer because OSS is open and can be developed independently. In this paper, USBCNC V.3.42 is used as an alternative OSS. The test result shows that the work piece is in match with the desired pattern. The test result shows that the performance of machines using OSS has similar performance with the machine using software from the manufacturer. 

Quality Attributes and Service-Oriented Architectures

National Research Council Canada - National Science Library

O'Brien, Liam; Bass, Len; Merson, Paulo

2005-01-01

.... Because software architecture is the bridge between mission/business goals and a software-intensive system, and quality attribute requirements drive software architecture design, it is important...

Arquitectura orientada a servicios para software de apoyo para el proceso personal de software A service oriented architecture for the implementation of the personal software process

Directory of Open Access Journals (Sweden)

Erick Salinas

2011-06-01

Full Text Available El presente trabajo describe una arquitectura orientada a servicios para un software que tiene como objetivo facilitar la implementación de un Proceso Personal de Software en un equipo de desarrollo u organización. Entre las características que posee este software y que son relevantes de mencionar están las de entregar extensibilidad e independencia, esto se ve reflejado en la facilidad para agregar nuevas herramientas al proceso de desarrollo de software integradas al Proceso Personal de Software con un máximo de independencia de sistemas operativos y lenguajes de programación. El software implementado realiza la recolección de los datos necesarios para el Proceso Personal de Software casi completamente automática, considerando que el administrador solamente clasifica los errores que pueden ocurrir cuando se utiliza algún lenguaje de programación en particular, entre otras pequeñas tareas. Esta facilidad de uso hace que la implementación del Proceso Personal de Software se realice exitosamente con un bajo esfuerzo requerido por los integrantes del equipo de desarrollo.This work describes a service oriented architecture of a software application that facilitates the implementation of the Personal Software Process by a development team or an organization. Some of the characteristics of this software and which are important to mention are extensibility and technical environment independence. These characteristics facilitate the process of adding new tools to the software development process integrating them to the Personal Software Process independently of the operating systems and programming languages being used. The implemented software undertakes the data collection necessary to the Personal Software Process almost automatically, since the administrator must only classify the errors that may occur when a particular programming language is used, among other small tasks. This ease of use approach helps to make the implementation of

FLEX: A Modular Software Architecture for Flight License Exam

Science.gov (United States)

Arsan, Taner; Saka, Hamit Emre; Sahin, Ceyhun

This paper is about the design and implementation of an examination system based on World Wide Web. It is called FLEX-Flight License Exam Software. We designed and implemented flexible and modular software architecture. The implemented system has basic specifications such as appending questions in system, building exams with these appended questions and making students to take these exams. There are three different types of users with different authorizations. These are system administrator, operators and students. System administrator operates and maintains the system, and also audits the system integrity. The system administrator can not be able to change the result of exams and can not take an exam. Operator module includes instructors. Operators have some privileges such as preparing exams, entering questions, changing the existing questions and etc. Students can log on the system and can be accessed to exams by a certain URL. The other characteristic of our system is that operators and system administrator are not able to delete questions due to the security problems. Exam questions can be inserted on their topics and lectures in the database. Thus; operators and system administrator can easily choose questions. When all these are taken into consideration, FLEX software provides opportunities to many students to take exams at the same time in safe, reliable and user friendly conditions. It is also reliable examination system for the authorized aviation administration companies. Web development platform - LAMP; Linux, Apache web server, MySQL, Object-oriented scripting Language - PHP are used for developing the system and page structures are developed by Content Management System - CMS.

A Software Architecture for Control of Value Production in Federated Systems

Directory of Open Access Journals (Sweden)

Jay S. Bayne

2003-08-01

Full Text Available Federated enterprises are defined as interactive commercial entities that produce products and consume resources through a network of open, free-market transactions. Value production in such entities is defined as the real-time computation of enterprise value propositions. These computations are increasingly taking place in a grid-connected space – a space that must provide for secure, real-time, reliable end-to-end transactions governed by formal trading protocols. We present the concept of a value production unit (VPU as a key element of federated trading systems, and a software architecture for automation and control of federations of such VPUs.

Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

How organisation of architecture documentation affects architectural knowledge retrieval

NARCIS (Netherlands)

de Graaf, K.A.; Liang, P.; Tang, A.; Vliet, J.C.

A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional arrangement of the architectural knowledge. Knowledge retrieval from file-based architecture documentation is efficient if the organisation of

Hardware Architecture of Polyphase Filter Banks Performing Embedded Resampling for Software-Defined Radio Front-Ends

DEFF Research Database (Denmark)

Awan, Mehmood-Ur-Rehman; Le Moullec, Yannick; Koch, Peter

2012-01-01

, and power optimization for field programmable gate array (FPGA) based architectures in an M -path polyphase filter bank with modified N -path polyphase filter. Such systems allow resampling by arbitrary ratios while simultaneously performing baseband aliasing from center frequencies at Nyquist zones......In this paper, we describe resource-efficient hardware architectures for software-defined radio (SDR) front-ends. These architectures are made efficient by using a polyphase channelizer that performs arbitrary sample rate changes, frequency selection, and bandwidth control. We discuss area, time...... that are not multiples of the output sample rate. A non-maximally decimated polyphase filter bank, where the number of data loads is not equal to the number of M subfilters, processes M subfilters in a time period that is either less than or greater than the M data-load’s time period. We present a load...

The ITER Fast Plant System Controller ATCA prototype Real-Time Software Architecture

International Nuclear Information System (INIS)

Carvalho, B.B.; Santos, B.; Carvalho, P.F.; Neto, A.; Boncagni, L.; Batista, A.J.N.; Correia, M.; Sousa, J.; Gonçalves, B.

2013-01-01

Highlights: ► High performance ATCA systems for fast control and data acquisition. ► IEEE1588 timing system and synchronization. ► Plasma control algorithms. ► Real-time control software frameworks. ► Targeted for nuclear fusion experiments with long duration discharges. -- Abstract: IPFN is developing a prototype Fast Plant System Controller (FPSC) based in ATCA embedded technologies dedicated to ITER CODAC data acquisition and control tasks in the sub-millisecond range. The main goal is to demonstrate the usability of the ATCA standard and its enhanced specifications for the high speed, very high density parallel data acquisition needs of the most demanding ITER tokamak plasma Instrumentation and Control (I and C) systems. This effort included the in-house development of a new family of high performance ATCA I/O and timing boards. The standard ITER software system CODAC Core System (CCS) v3.1, with the control based in the EPICS system does not cover yet the real-time requirements fulfilled by this hardware, so a new set of software components was developed for this specific platform, attempting to integrate and leverage the new features in CSS, for example the Multithreaded Application Real Time executor (MARTe) software framework, the new Data Archiving Network (DAN) solution, an ATCA IEEE-1588-2008 timing interface, and the Intelligent Platform Management Interface (IPMI) for system monitoring and remote management. This paper presents the overall software architecture for the ATCA FPSC, as well a discussion on the ITER constrains and design choices and finally a detailed description of the software components already developed

The ITER Fast Plant System Controller ATCA prototype Real-Time Software Architecture

Energy Technology Data Exchange (ETDEWEB)

Carvalho, B.B., E-mail: bernardo@ipfn.ist.utl.pt [Associacao EURATOM/IST Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, P-1049-001 Lisboa (Portugal); Santos, B.; Carvalho, P.F.; Neto, A. [Associacao EURATOM/IST Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, P-1049-001 Lisboa (Portugal); Boncagni, L. [Associazione Euratom-ENEA sulla Fusione, Frascati Research Centre, Division of Fusion Physics, Frascati, Rome (Italy); Batista, A.J.N.; Correia, M.; Sousa, J.; Gonçalves, B. [Associacao EURATOM/IST Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, P-1049-001 Lisboa (Portugal)

2013-10-15

Highlights: ► High performance ATCA systems for fast control and data acquisition. ► IEEE1588 timing system and synchronization. ► Plasma control algorithms. ► Real-time control software frameworks. ► Targeted for nuclear fusion experiments with long duration discharges. -- Abstract: IPFN is developing a prototype Fast Plant System Controller (FPSC) based in ATCA embedded technologies dedicated to ITER CODAC data acquisition and control tasks in the sub-millisecond range. The main goal is to demonstrate the usability of the ATCA standard and its enhanced specifications for the high speed, very high density parallel data acquisition needs of the most demanding ITER tokamak plasma Instrumentation and Control (I and C) systems. This effort included the in-house development of a new family of high performance ATCA I/O and timing boards. The standard ITER software system CODAC Core System (CCS) v3.1, with the control based in the EPICS system does not cover yet the real-time requirements fulfilled by this hardware, so a new set of software components was developed for this specific platform, attempting to integrate and leverage the new features in CSS, for example the Multithreaded Application Real Time executor (MARTe) software framework, the new Data Archiving Network (DAN) solution, an ATCA IEEE-1588-2008 timing interface, and the Intelligent Platform Management Interface (IPMI) for system monitoring and remote management. This paper presents the overall software architecture for the ATCA FPSC, as well a discussion on the ITER constrains and design choices and finally a detailed description of the software components already developed.

Lean Architecture for Agile Software Development

CERN Document Server

Coplien, James O

2010-01-01

More and more Agile projects are seeking architectural roots as they struggle with complexity and scale - and they're seeking lightweight ways to do it: Still seeking? In this book the authors help you to find your own path; Taking cues from Lean development, they can help steer your project toward practices with longstanding track records; Up-front architecture? Sure. You can deliver an architecture as code that compiles and that concretely guides development without bogging it down in a mass of documents and guesses about the implementation; Documentation? Even a whiteboard diagram, or a CRC

An Empirical Investigation of Architectural Prototyping

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2010-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

Generic robot architecture

Science.gov (United States)

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2010-09-21

The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

A flexible software architecture for tokamak discharge control systems

International Nuclear Information System (INIS)

Ferron, J.R.; Penaflor, B.; Walker, M.L.; Moller, J.; Butner, D.

1995-01-01

The software structure of the plasma control system in use on the DIII-D tokamak experiment is described. This system implements control functions through software executing in real time on one or more digital computers. The software is organized into a hierarchy that allows new control functions needed to support the DIII-D experimental program to be added easily without affecting previously implemented functions. This also allows the software to be portable in order to create control systems for other applications. The tokamak operator uses an X-windows based interface to specify the time evolution of a tokamak discharge. The interface provides a high level view for the operator that reduces the need for detailed knowledge of the control system operation. There is provision for an asynchronous change to an alternate discharge time evolution in response to an event that is detected in real time. Quality control is enhanced through off-line testing that can make use of software-based tokamak simulators

GRAPES: a software for parallel searching on biological graphs targeting multi-core architectures.

Directory of Open Access Journals (Sweden)

Rosalba Giugno

Full Text Available Biological applications, from genomics to ecology, deal with graphs that represents the structure of interactions. Analyzing such data requires searching for subgraphs in collections of graphs. This task is computationally expensive. Even though multicore architectures, from commodity computers to more advanced symmetric multiprocessing (SMP, offer scalable computing power, currently published software implementations for indexing and graph matching are fundamentally sequential. As a consequence, such software implementations (i do not fully exploit available parallel computing power and (ii they do not scale with respect to the size of graphs in the database. We present GRAPES, software for parallel searching on databases of large biological graphs. GRAPES implements a parallel version of well-established graph searching algorithms, and introduces new strategies which naturally lead to a faster parallel searching system especially for large graphs. GRAPES decomposes graphs into subcomponents that can be efficiently searched in parallel. We show the performance of GRAPES on representative biological datasets containing antiviral chemical compounds, DNA, RNA, proteins, protein contact maps and protein interactions networks.

Adaptive software architecture based on confident HCI for the deployment of sensitive services in Smart Homes.

Science.gov (United States)

Vega-Barbas, Mario; Pau, Iván; Martín-Ruiz, María Luisa; Seoane, Fernando

2015-03-25

Smart spaces foster the development of natural and appropriate forms of human-computer interaction by taking advantage of home customization. The interaction potential of the Smart Home, which is a special type of smart space, is of particular interest in fields in which the acceptance of new technologies is limited and restrictive. The integration of smart home design patterns with sensitive solutions can increase user acceptance. In this paper, we present the main challenges that have been identified in the literature for the successful deployment of sensitive services (e.g., telemedicine and assistive services) in smart spaces and a software architecture that models the functionalities of a Smart Home platform that are required to maintain and support such sensitive services. This architecture emphasizes user interaction as a key concept to facilitate the acceptance of sensitive services by end-users and utilizes activity theory to support its innovative design. The application of activity theory to the architecture eases the handling of novel concepts, such as understanding of the system by patients at home or the affordability of assistive services. Finally, we provide a proof-of-concept implementation of the architecture and compare the results with other architectures from the literature.

High performance in software development

CERN Multimedia

CERN. Geneva; Haapio, Petri; Liukkonen, Juha-Matti

2015-01-01

What are the ingredients of high-performing software? Software development, especially for large high-performance systems, is one the most complex tasks mankind has ever tried. Technological change leads to huge opportunities but challenges our old ways of working. Processing large data sets, possibly in real time or with other tight computational constraints, requires an efficient solution architecture. Efficiency requirements span from the distributed storage and large-scale organization of computation and data onto the lowest level of processor and data bus behavior. Integrating performance behavior over these levels is especially important when the computation is resource-bounded, as it is in numerics: physical simulation, machine learning, estimation of statistical models, etc. For example, memory locality and utilization of vector processing are essential for harnessing the computing power of modern processor architectures due to the deep memory hierarchies of modern general-purpose computers. As a r...

Architectural-level power estimation and experimentation

Science.gov (United States)

Ye, Wu

With the emergence of a plethora of embedded and portable applications and ever increasing integration levels, power dissipation of integrated circuits has moved to the forefront as a design constraint. Recent years have also seen a significant trend towards designs starting at the architectural (or RT) level. Those demand accurate yet fast RT level power estimation methodologies and tools. This thesis addresses issues and experiments associate with architectural level power estimation. An execution driven, cycle-accurate RT level power simulator, SimplePower, was developed using transition-sensitive energy models. It is based on the architecture of a five-stage pipelined RISC datapath for both 0.35mum and 0.8mum technology and can execute the integer subset of the instruction set of SimpleScalar . SimplePower measures the energy consumed in the datapath, memory and on-chip buses. During the development of SimplePower , a partitioning power modeling technique was proposed to model the energy consumed in complex functional units. The accuracy of this technique was validated with HSPICE simulation results for a register file and a shifter. A novel, selectively gated pipeline register optimization technique was proposed to reduce the datapath energy consumption. It uses the decoded control signals to selectively gate the data fields of the pipeline registers. Simulation results show that this technique can reduce the datapath energy consumption by 18--36% for a set of benchmarks. A low-level back-end compiler optimization, register relabeling, was applied to reduce the on-chip instruction cache data bus switch activities. Its impact was evaluated by SimplePower. Results show that it can reduce the energy consumed in the instruction data buses by 3.55--16.90%. A quantitative evaluation was conducted for the impact of six state-of-art high-level compilation techniques on both datapath and memory energy consumption. The experimental results provide a valuable insight for

Do Architectural Design Decisions Improve the Understanding of Software Architecture? Two Controlled Experiments

NARCIS (Netherlands)

Shahin, M.; Liang, P.; Li, Z.

2014-01-01

Architectural design decision (ADD) and its design rationale, as a paradigm shift on documenting and enriching architecture design description, is supposed to facilitate the understanding of architecture and the reasoning behind the design rationale, which consequently improves the architecting

GAUDI-Architecture design document

CERN Document Server

Mato, P

1998-01-01

98-064 This document is the result of the architecture design phase for the LHCb event data processing applications project. The architecture of the LHCb software system includes its logical and physical structure which has been forged by all the strategic and tactical decisions applied during development. The strategic decisions should be made explicitly with the considerations for the trade-off of each alternative. The other purpose of this document is that it serves as the main material for the scheduled architecture review that will take place in the next weeks. The architecture review will allow us to identify what are the weaknesses or strengths of the proposed architecture as well as we hope to obtain a list of suggested changes to improve it. All that well before the system is being realized in code. It is in our interest to identify the possible problems at the architecture design phase of the software project before much of the software is implemented. Strategic decisions must be cross checked caref...

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, Eelke

2005-01-01

One of the qualities that has received increased attention in recent decades is usability. A software product with poor usability is likely to fail in a highly competitive market; therefore software developing organizations are paying more and more attention to ensuring the usability of their

Software refactoring at the package level using clustering techniques

KAUST Repository

Alkhalid, A.

2011-01-01

Enhancing, modifying or adapting the software to new requirements increases the internal software complexity. Software with high level of internal complexity is difficult to maintain. Software refactoring reduces software complexity and hence decreases the maintenance effort. However, software refactoring becomes quite challenging task as the software evolves. The authors use clustering as a pattern recognition technique to assist in software refactoring activities at the package level. The approach presents a computer aided support for identifying ill-structured packages and provides suggestions for software designer to balance between intra-package cohesion and inter-package coupling. A comparative study is conducted applying three different clustering techniques on different software systems. In addition, the application of refactoring at the package level using an adaptive k-nearest neighbour (A-KNN) algorithm is introduced. The authors compared A-KNN technique with the other clustering techniques (viz. single linkage algorithm, complete linkage algorithm and weighted pair-group method using arithmetic averages). The new technique shows competitive performance with lower computational complexity. © 2011 The Institution of Engineering and Technology.

Software Radar Technology

Directory of Open Access Journals (Sweden)

Tang Jun

2015-08-01

Full Text Available In this paper, the definition and the key features of Software Radar, which is a new concept, are proposed and discussed. We consider the development of modern radar system technology to be divided into three stages: Digital Radar, Software radar and Intelligent Radar, and the second stage is just commencing now. A Software Radar system should be a combination of various modern digital modular components conformed to certain software and hardware standards. Moreover, a software radar system with an open system architecture supporting to decouple application software and low level hardware would be easy to adopt "user requirements-oriented" developing methodology instead of traditional "specific function-oriented" developing methodology. Compared with traditional Digital Radar, Software Radar system can be easily reconfigured and scaled up or down to adapt to the changes of requirements and technologies. A demonstration Software Radar signal processing system, RadarLab 2.0, which has been developed by Tsinghua University, is introduced in this paper and the suggestions for the future development of Software Radar in China are also given in the conclusion.

Software refactoring at the package level using clustering techniques

KAUST Repository

Alkhalid, A.; Alshayeb, M.; Mahmoud, S. A.

2011-01-01

Enhancing, modifying or adapting the software to new requirements increases the internal software complexity. Software with high level of internal complexity is difficult to maintain. Software refactoring reduces software complexity and hence

A Reference Software Architecture to Support Unmanned Aircraft Integration in the National Airspace System

Science.gov (United States)

2012-07-01

and Avoid ( SAA ) testbed that provides some of the core services . This paper describes the general architecture and a SAA testbed implementation that...that provides data and software services to enable a set of Unmanned Aircraft (UA) platforms to operate in a wide range of air domains which may...implemented by MIT Lincoln Laboratory in the form of a Sense and Avoid ( SAA ) testbed that provides some of the core services . This paper describes the general

Towards a Reference Architecture to Provision Tools as a Service for Global Software Development

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali

2014-01-01

Organizations involve in Global Software Development (GSD) face challenges in terms of having access to appropriate set of tools for performing distributed engineering and development activities, integration between heterogeneous desktop and web-based tools, management of artifacts developed...... distributed environment. In this paper, we argue the need to have a cloud-enabled platform for supporting GSD and propose reference architecture of a cloud based Platform for providing support to provision ecosystem of the Tools as a Service (PTaaS)....

The JET level-1 software

International Nuclear Information System (INIS)

McCullen, P.A.; Farthing, J.W.

1998-01-01

The complex nature of the JET machine requires a large amount of control parameter preparation, selection and validation before a pulse may be started. Level-1 is defined as the centralized, cross-subsystem control of JET. Before it was introduced over 10 years ago, the Session Leader (SL) who is responsible for specifying the parameter settings for a JET pulse, had virtually no software available to help him except for a simple editor used for the creation of control waveforms. Most of the required parameter settings were calculated by hand and then passed on either verbally or via hand-written forms. These parameters were then set by a large number of people - Local Unit Responsible Officers (LUROs) and CODAS Duty Officers (CDOs) using a wide selection of dedicated software. At this time the Engineer in Charge (EiC) would largely depend on the LUROs to inform him that conditions were ready. He never set control parameters personally and had little or no software available to him to see what many of the settings were. The first implementation of Level-1 software went some way towards improving the task of pulse schedule preparation in that the SL could specify his requirements via a computer interface and store them in a database for later use. At that time the maximum number of parameters that could be handled was 500. (author)

Architecture for autonomy

Science.gov (United States)

Broten, Gregory S.; Monckton, Simon P.; Collier, Jack; Giesbrecht, Jared

2006-05-01

In 2002 Defence R&D Canada changed research direction from pure tele-operated land vehicles to general autonomy for land, air, and sea craft. The unique constraints of the military environment coupled with the complexity of autonomous systems drove DRDC to carefully plan a research and development infrastructure that would provide state of the art tools without restricting research scope. DRDC's long term objectives for its autonomy program address disparate unmanned ground vehicle (UGV), unattended ground sensor (UGS), air (UAV), and subsea and surface (UUV and USV) vehicles operating together with minimal human oversight. Individually, these systems will range in complexity from simple reconnaissance mini-UAVs streaming video to sophisticated autonomous combat UGVs exploiting embedded and remote sensing. Together, these systems can provide low risk, long endurance, battlefield services assuming they can communicate and cooperate with manned and unmanned systems. A key enabling technology for this new research is a software architecture capable of meeting both DRDC's current and future requirements. DRDC built upon recent advances in the computing science field while developing its software architecture know as the Architecture for Autonomy (AFA). Although a well established practice in computing science, frameworks have only recently entered common use by unmanned vehicles. For industry and government, the complexity, cost, and time to re-implement stable systems often exceeds the perceived benefits of adopting a modern software infrastructure. Thus, most persevere with legacy software, adapting and modifying software when and wherever possible or necessary -- adopting strategic software frameworks only when no justifiable legacy exists. Conversely, academic programs with short one or two year projects frequently exploit strategic software frameworks but with little enduring impact. The open-source movement radically changes this picture. Academic frameworks

An Analysis of Security and Privacy Issues in Smart Grid Software Architectures on Clouds

Energy Technology Data Exchange (ETDEWEB)

Simmhan, Yogesh; Kumbhare, Alok; Cao, Baohua; Prasanna, Viktor K.

2011-07-09

Power utilities globally are increasingly upgrading to Smart Grids that use bi-directional communication with the consumer to enable an information-driven approach to distributed energy management. Clouds offer features well suited for Smart Grid software platforms and applications, such as elastic resources and shared services. However, the security and privacy concerns inherent in an information rich Smart Grid environment are further exacerbated by their deployment on Clouds. Here, we present an analysis of security and privacy issues in a Smart Grids software architecture operating on different Cloud environments, in the form of a taxonomy. We use the Los Angeles Smart Grid Project that is underway in the largest U.S. municipal utility to drive this analysis that will benefit both Cloud practitioners targeting Smart Grid applications, and Cloud researchers investigating security and privacy.

Adaptive Software Architecture Based on Confident HCI for the Deployment of Sensitive Services in Smart Homes

Science.gov (United States)

Vega-Barbas, Mario; Pau, Iván; Martín-Ruiz, María Luisa; Seoane, Fernando

2015-01-01

Smart spaces foster the development of natural and appropriate forms of human-computer interaction by taking advantage of home customization. The interaction potential of the Smart Home, which is a special type of smart space, is of particular interest in fields in which the acceptance of new technologies is limited and restrictive. The integration of smart home design patterns with sensitive solutions can increase user acceptance. In this paper, we present the main challenges that have been identified in the literature for the successful deployment of sensitive services (e.g., telemedicine and assistive services) in smart spaces and a software architecture that models the functionalities of a Smart Home platform that are required to maintain and support such sensitive services. This architecture emphasizes user interaction as a key concept to facilitate the acceptance of sensitive services by end-users and utilizes activity theory to support its innovative design. The application of activity theory to the architecture eases the handling of novel concepts, such as understanding of the system by patients at home or the affordability of assistive services. Finally, we provide a proof-of-concept implementation of the architecture and compare the results with other architectures from the literature. PMID:25815449

PICNIC Architecture.

Science.gov (United States)

Saranummi, Niilo

2005-01-01

The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.

The Ragnarok Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

1999-01-01

Ragnarok is an experimental software development environment that focuses on enhanced support for managerial activities in large scale software development taking the daily work of the software developer as its point of departure. The main emphasis is support in three areas: management, navigation......, and collaboration. The leitmotif is the software architecture, which is extended to handle managerial data in addition to source code; this extended software architecture is put under tight version- and configuration management control and furthermore used as basis for visualisation. Preliminary results of using...

A cognitive model for software architecture complexity

NARCIS (Netherlands)

Bouwers, E.; Lilienthal, C.; Visser, J.; Van Deursen, A.

2010-01-01

Evaluating the complexity of the architecture of a softwaresystem is a difficult task. Many aspects have to be considered to come to a balanced assessment. Several architecture evaluation methods have been proposed, but very few define a quality model to be used during the evaluation process. In

An Evaluation of the High Level Architecture (HLA) as a Framework for NASA Modeling and Simulation

Science.gov (United States)

Reid, Michael R.; Powers, Edward I. (Technical Monitor)

2000-01-01

The High Level Architecture (HLA) is a current US Department of Defense and an industry (IEEE-1516) standard architecture for modeling and simulations. It provides a framework and set of functional rules and common interfaces for integrating separate and disparate simulators into a larger simulation. The goal of the HLA is to reduce software costs by facilitating the reuse of simulation components and by providing a runtime infrastructure to manage the simulations. In order to evaluate the applicability of the HLA as a technology for NASA space mission simulations, a Simulations Group at Goddard Space Flight Center (GSFC) conducted a study of the HLA and developed a simple prototype HLA-compliant space mission simulator. This paper summarizes the prototyping effort and discusses the potential usefulness of the HLA in the design and planning of future NASA space missions with a focus on risk mitigation and cost reduction.

Architecture-Centric Evolution : New Issues and Trends. Report on the Workshop ACE at ECOOP’06

NARCIS (Netherlands)

Avgeriou, Paris; Zdun, Uwe; Borne, Isabelle

2006-01-01

Software evolution has largely been focused on low-level implementation artefacts through refactoring techniques rather than the architectural level. However code-centric evolution techniques have not managed to effectively solve the problems that software evolution entails. Instead a paradigm shift

The toolbus coordination architecture

NARCIS (Netherlands)

Bergstra, J.A.; Klint, P.

1996-01-01

Building large, heterogeneous, distributed software systems poses serious problems for the software engineer; achieving interoperability of software systems is still a major challenge. We describe an experiment in designing a generic software architecture for solving these problems. To get

Software Maintenance Management Evaluation and Continuous Improvement

CERN Document Server

April, Alain

2008-01-01

This book explores the domain of software maintenance management and provides road maps for improving software maintenance organizations. It describes full maintenance maturity models organized by levels 1, 2, and 3, which allow for benchmarking and continuous improvement paths. Goals for each key practice area are also provided, and the model presented is fully aligned with the architecture and framework of software development maturity models of CMMI and ISO 15504. It is complete with case studies, figures, tables, and graphs.

Models for Evaluating and Improving Architecture Competence

National Research Council Canada - National Science Library

Bass, Len; Clements, Paul; Kazman, Rick; Klein, Mark

2008-01-01

Software architecture competence is the ability of an individual or organization to acquire, use, and sustain the skills and knowledge necessary to carry out software architecture-centric practices...

Software Architecture for Automatic Test Program Generation System Based on ATML%基于ATML的测试程序自动生成系统软件体系结构

Institute of Scientific and Technical Information of China (English)

范书义; 徐国华; 王成

2012-01-01

针对目前ATS的测试程序主要依靠手工编写的现状,研究了基于ATML的测试程序自动生成系统的软件体系结构；通过对ATML框架结构的系统、深入分析,构建了基于ATML的测试程序自动生成系统的业务模型,以软件体系结构理论为基础,设计了基于ATML的测试程序自动生成系统的软件体系结构的“4+1”视图模型；该软件体系结构在通用机电测试平台的测试程序开发中得到了应用,结果表明,该模型可以为基于ATML的测试程序自动生成系统的开发提供顶层指导.%Targeted at the status of ATS's test program which is mainly hand-written at present, this paper researches the software architecture of automatic test program generation system based on ATML. Through deep and systematic analysis of ATML framework, the business model of automatic test program generation system is built. Based on the theory of software architecture, the "4 + 1" view model of software architecture of automatic test program generation system based on ATML is designed. This software architecture is used in test program development of general electromechanical test platform. The application result shows that the model can provide top -level guidance for development of automatic test program generation system based on ATML.

The software architecture of the real-time on-line decision support system 'RODOS'

International Nuclear Information System (INIS)

Rafat, M.; Schuele, O.

1998-01-01

The RODOS project aims at the development of an integrated and comprehensive real-time on-line decision support system for off-site emergency management of nuclear accidents in Europe, applicable for the vicinity of the release and the early phase up to far distant areas and the later stages of an accident. The architecture of the RODOS software framework is described as a tool for processing and managing a large variety of different types of information, including those which are categorized in terms of meteorology, radiology, economy, emergency actions and countermeasures, rules, preferences, facts, maps, statistics, catalogues, models and methods. The conceptual design of the software structure based on the Client-Server model and the practical co-operation between a set of autonomous applications meeting the user requirements and objectives are discussed. Details of co-operation management are described by explaining the concepts of the inter-module communication, data exchange, control of operation and data model. (author)

Reliability Engineering for Service Oriented Architectures

Science.gov (United States)

2013-02-01

Common Object Request Broker Architecture Ecosystem In software , an ecosystem is a set of applications and/or services that grad- ually build up over time...Enterprise Service Bus Foreign In an SOA context: Any SOA, service or software which the owners of the calling software do not have control of, either...SOA Service Oriented Architecture SRE Software Reliability Engineering System Mode Many systems exhibit different modes of operation. E.g. the cockpit

JEM-X ISSW architectural design document

DEFF Research Database (Denmark)

Maisala, S.; Huovelin, J.; Westergaard, Niels Jørgen Stenfeldt

Detailed description of the architectural design of the JEM-X instrument specific software, to be delivered by SDAST to ISDC.......Detailed description of the architectural design of the JEM-X instrument specific software, to be delivered by SDAST to ISDC....

Service Oriented Architecture for High Level Applications

International Nuclear Information System (INIS)

Chu, P.

2012-01-01

Standalone high level applications often suffer from poor performance and reliability due to lengthy initialization, heavy computation and rapid graphical update. Service-oriented architecture (SOA) is trying to separate the initialization and computation from applications and to distribute such work to various service providers. Heavy computation such as beam tracking will be done periodically on a dedicated server and data will be available to client applications at all time. Industrial standard service architecture can help to improve the performance, reliability and maintainability of the service. Robustness will also be improved by reducing the complexity of individual client applications.

Development of the Lymphoma Enterprise Architecture Database: a caBIG Silver level compliant system.

Science.gov (United States)

Huang, Taoying; Shenoy, Pareen J; Sinha, Rajni; Graiser, Michael; Bumpers, Kevin W; Flowers, Christopher R

2009-04-03

Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid (caBIG) Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system (LEAD), which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK) provided by National Cancer Institute's Center for Bioinformatics to establish the LEAD platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG to the management of clinical and biological data.

Recent Developments in Low-Level Software Security

OpenAIRE

Agten , Pieter; Nikiforakis , Nick; Strackx , Raoul; Groef , Willem ,; Piessens , Frank

2012-01-01

Part 1: Keynotes; International audience; An important objective for low-level software security research is to develop techniques that make it harder to launch attacks that exploit implementation details of the system under attack. Baltopoulos and Gordon have summarized this as the principle of source-based reasoning for security: security properties of a software system should follow from review of the source code and its source-level semantics, and should not depend on details of the compi...

EZ-Rhizo software: the gateway to root architecture analysis.

Science.gov (United States)

Armengaud, Patrick

2009-02-01

Plants are sessile organisms that have to cope with the available nutritional resources and environmental constraints in the place where they germinate. To fully exploit their nearby resources, they have evolved a highly plastic and responsive root system. Adaptations to limited nutrients include a wide range of specific root responses, e.g., the emergence of new root types, root branching or specific growth of lateral roots. These root system architecture (RSA) features are of utmost importance when investigating the underlying mechanisms by forward, reverse or quantitative genetic approaches. The EZ-Rhizo software was developed to facilitate such root measurements in a fast, simple and accurate way. The performances of EZ-Rhizo in providing about 20 primary and derived RSA parameters were illustrated by looking at natural variability across 23 Arabidopsis accessions. The different RSA profiles obtained from plants grown in favorable condition illustrated the wide reservoir of natural genetic resources underlying specific features of root growth. This diversity was used here to correlate the RSA genetic variability with growth, development and environmental properties of accession origins.

Parallel Fortran-MPI software for numerical inversion of the Laplace transform and its application to oscillatory water levels in groundwater environments

Science.gov (United States)

Zhan, X.

2005-01-01

A parallel Fortran-MPI (Message Passing Interface) software for numerical inversion of the Laplace transform based on a Fourier series method is developed to meet the need of solving intensive computational problems involving oscillatory water level's response to hydraulic tests in a groundwater environment. The software is a parallel version of ACM (The Association for Computing Machinery) Transactions on Mathematical Software (TOMS) Algorithm 796. Running 38 test examples indicated that implementation of MPI techniques with distributed memory architecture speedups the processing and improves the efficiency. Applications to oscillatory water levels in a well during aquifer tests are presented to illustrate how this package can be applied to solve complicated environmental problems involved in differential and integral equations. The package is free and is easy to use for people with little or no previous experience in using MPI but who wish to get off to a quick start in parallel computing. ?? 2004 Elsevier Ltd. All rights reserved.

Classifying and evaluating architecture design methods

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1999-01-01

The concept of software architecture has gained a wide popularity and is generally considered to play a fundamental role in coping with the inherent difficulties of the development of large-scale and complex software systems. This document first gives a definition of architectures. Second, a

Classifying and Evaluating Architecture Design Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Aksit, Mehmet; Aksit, Mehmet

2002-01-01

The concept of software architecture has gained a wide popularity and is generally considered to play a fundamental role in coping with the inherent difficulties of the development of large-scale and complex software systems. This chapter first gives a definition of architecture. Second, a

Proof of Concept Integration of a Single-Level Service-Oriented Architecture into a Multi-Domain Secure Environment

National Research Council Canada - National Science Library

Gilkey, Craig M

2008-01-01

.... A SOA software platform integrates independent, unrelated applications into a common architecture, thereby introducing data reuse, interoperability, and loose coupling between the services involved. The U.S...

Building evolutionary architectures support constant change

CERN Document Server

Ford, Neal; Kua, Patrick

2017-01-01

The software development ecosystem is constantly changing, providing a constant stream of new tools, frameworks, techniques, and paradigms. Over the past few years, incremental developments in core engineering practices for software development have created the foundations for rethinking how architecture changes over time, along with ways to protect important architectural characteristics as it evolves. This practical guide ties those parts together with a new way to think about architecture and time.

Analysis and proposal of the new architecture of the selected parts of the software support of the COMPASS experiment

CERN Document Server

Jary, Vladimir

This work focuses on the data acquisition system of the Compass experiment at CERN. At first the database current subsystem that suffered from increased load during year 2009 is analysed. The reasons of problems are identified and new architecture that includes replication, backups, and monitoring for achieving the high availability and reliability is proposed and implemented. Several advanced database features including partitioned tables or storage engines are described and tested. Then, the process of implementation of the remote control and monitoring of the experiment is explained. As the existing data acquisition system is partly based on a deprecated technologies, development of a new architecture has started. We focus on requirements analysis and proposal of a control and monitoring software for the new hardware platform based on the FPGA technology. The software is to be deployed in a heterogenous network environment. According to the proposal, the system is built on the DIM communication library. Ro...

Video sensor architecture for surveillance applications.

Science.gov (United States)

Sánchez, Jordi; Benet, Ginés; Simó, José E

2012-01-01

This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

Video Sensor Architecture for Surveillance Applications

Directory of Open Access Journals (Sweden)

José E. Simó

2012-02-01

Full Text Available This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service.

Science.gov (United States)

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

2015-04-01

To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs.

Roofline model toolkit: A practical tool for architectural and program analysis

Energy Technology Data Exchange (ETDEWEB)

Lo, Yu Jung [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Van Straalen, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ligocki, Terry J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cordery, Matthew J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wright, Nicholas J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hall, Mary W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-04-18

We present preliminary results of the Roofline Toolkit for multicore, many core, and accelerated architectures. This paper focuses on the processor architecture characterization engine, a collection of portable instrumented micro benchmarks implemented with Message Passing Interface (MPI), and OpenMP used to express thread-level parallelism. These benchmarks are specialized to quantify the behavior of different architectural features. Compared to previous work on performance characterization, these microbenchmarks focus on capturing the performance of each level of the memory hierarchy, along with thread-level parallelism, instruction-level parallelism and explicit SIMD parallelism, measured in the context of the compilers and run-time environments. We also measure sustained PCIe throughput with four GPU memory managed mechanisms. By combining results from the architecture characterization with the Roofline model based solely on architectural specifications, this work offers insights for performance prediction of current and future architectures and their software systems. To that end, we instrument three applications and plot their resultant performance on the corresponding Roofline model when run on a Blue Gene/Q architecture.

Control software architecture and operating modes of the Model M-2 maintenance system

Energy Technology Data Exchange (ETDEWEB)

Satterlee, P.E. Jr.; Martin, H.L.; Herndon, J.N.

1984-04-01

The Model M-2 maintenance system is the first completely digitally controlled servomanipulator. The M-2 system allows dexterous operations to be performed remotely using bilateral force-reflecting master/slave techniques, and its integrated operator interface takes advantage of touch-screen-driven menus to allow selection of all possible operating modes. The control system hardware for this system has been described previously. This paper describes the architecture of the overall control system. The system's various modes of operation are identified, the software implementation of each is described, system diagnostic routines are described, and highlights of the computer-augmented operator interface are discussed. 3 references, 5 figures.

Control software architecture and operating modes of the Model M-2 maintenance system

International Nuclear Information System (INIS)

Satterlee, P.E. Jr.; Martin, H.L.; Herndon, J.N.

1984-04-01

The Model M-2 maintenance system is the first completely digitally controlled servomanipulator. The M-2 system allows dexterous operations to be performed remotely using bilateral force-reflecting master/slave techniques, and its integrated operator interface takes advantage of touch-screen-driven menus to allow selection of all possible operating modes. The control system hardware for this system has been described previously. This paper describes the architecture of the overall control system. The system's various modes of operation are identified, the software implementation of each is described, system diagnostic routines are described, and highlights of the computer-augmented operator interface are discussed. 3 references, 5 figures

Interface-based software testing

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2016-10-01

Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

The Need for Software Architecture Evaluation in the Acquisition of Software-Intensive Sysetms

Science.gov (United States)

2014-01-01

Function and Performance Specification GIG Global Information Grid ISO International Standard Organisation MDA Model Driven Architecture...architecture and design, which is a key part of knowledge-based economy UNCLASSIFIED DSTO-TR-2936 UNCLASSIFIED 24  Allow Australian SMEs to

Workshop on SHAring and Reusing architectural Knowledge: (SHARK 2011)

NARCIS (Netherlands)

Avgeriou, P.; Lago, P.; Kruchten, P.; Taylor, R.N.; Gall, H.; Medvidovic, N.

2011-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service

OpenAIRE

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

2015-01-01

Objectives To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. Methods We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functi...

A single-board NMR spectrometer based on a software defined radio architecture

International Nuclear Information System (INIS)

Tang, Weinan; Wang, Weimin

2011-01-01

A single-board software defined radio (SDR) spectrometer for nuclear magnetic resonance (NMR) is presented. The SDR-based architecture, realized by combining a single field programmable gate array (FPGA) and a digital signal processor (DSP) with peripheral radio frequency (RF) front-end circuits, makes the spectrometer compact and reconfigurable. The DSP, working as a pulse programmer, communicates with a personal computer via a USB interface and controls the FPGA through a parallel port. The FPGA accomplishes digital processing tasks such as a numerically controlled oscillator (NCO), digital down converter (DDC) and gradient waveform generator. The NCO, with agile control of phase, frequency and amplitude, is part of a direct digital synthesizer that is used to generate an RF pulse. The DDC performs quadrature demodulation, multistage low-pass filtering and gain adjustment to produce a bandpass signal (receiver bandwidth from 3.9 kHz to 10 MHz). The gradient waveform generator is capable of outputting shaped gradient pulse waveforms and supports eddy-current compensation. The spectrometer directly acquires an NMR signal up to 30 MHz in the case of baseband sampling and is suitable for low-field (<0.7 T) application. Due to the featured SDR architecture, this prototype has flexible add-on ability and is expected to be suitable for portable NMR systems

Towards Analysis-Driven Scientific Software Architecture: The Case for Abstract Data Type Calculus

Directory of Open Access Journals (Sweden)

Damian W.I. Rouson

2008-01-01

Full Text Available This article approaches scientific software architecture from three analytical paths. Each path examines discrete time advancement of multiphysics phenomena governed by coupled differential equations. The new object-oriented Fortran 2003 constructs provide a formal syntax for an abstract data type (ADT calculus. The first analysis uses traditional object-oriented software design metrics to demonstrate the high cohesion and low coupling associated with the calculus. A second analysis from the viewpoint of computational complexity theory demonstrates that a more representative bug search strategy than that considered by Rouson et al. (ACM Trans. Math. Soft. 34(1 (2008 reduces the number of lines searched in a code with λ total lines from O(λ2 to O(λ log2 λ , which in turn becomes nearly independent of the overall code size in the context of ADT calculus. The third analysis derives from information theory an argument that ADT calculus simplifies developer communications in part by minimizing the growth in interface information content as developers add new physics to a multiphysics package.

Elementary study on γ analysis software for low level measurement

International Nuclear Information System (INIS)

Ruan Guanglin; Huang Xianguo; Xing Shixiong

2001-01-01

The difficulty in using fashion γ analysis software in low level measurement is discussed. The ROI report file of ORTEC operation system has been chosen as interface file to write γ analysis software for low-level measurement. The author gives software flowchart and applied example and discusses the existent problems

Development of the Lymphoma Enterprise Architecture Database: A caBIG(TM Silver Level Compliant System

Directory of Open Access Journals (Sweden)

Taoying Huang

2009-01-01

Full Text Available Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™ Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™, which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data.

Development of the Lymphoma Enterprise Architecture Database: A caBIG(TM Silver Level Compliant System

Directory of Open Access Journals (Sweden)

Taoying Huang

2009-04-01

Full Text Available Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™ Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™, which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data.

Development of the Lymphoma Enterprise Architecture Database: A caBIG(tm) Silver level compliant System

Science.gov (United States)

Huang, Taoying; Shenoy, Pareen J.; Sinha, Rajni; Graiser, Michael; Bumpers, Kevin W.; Flowers, Christopher R.

2009-01-01

Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™) Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™), which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK) provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data. PMID:19492074

FPGAs for software programmers

CERN Document Server

Hannig, Frank; Ziener, Daniel

2016-01-01

This book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavi...

Software development an open source approach

CERN Document Server

Tucker, Allen; de Silva, Chamindra

2011-01-01

Overview and Motivation Software Free and Open Source Software (FOSS)Two Case Studies Working with a Project Team Key FOSS Activities Client-Oriented vs. Community-Oriented Projects Working on a Client-Oriented Project Joining a Community-Oriented Project Using Project Tools Collaboration Tools Code Management Tools Run-Time System ConstraintsSoftware Architecture Architectural Patterns Layers, Cohesion, and Coupling Security Concurrency, Race Conditions, and DeadlocksWorking with Code Bad Smells and Metrics Refactoring Testing Debugging Extending the Software for a New ProjectDeveloping the D

TMT approach to observatory software development process

Science.gov (United States)

Buur, Hanne; Subramaniam, Annapurni; Gillies, Kim; Dumas, Christophe; Bhatia, Ravinder

2016-07-01

effective communications; adopting an agile-based software development process across the observatory to enable frequent software releases to help mitigate subsystem interdependencies; defining concise scope and work packages for each of the OSW subsystems to facilitate effective outsourcing of software deliverables to the ITCC partner, and to enable performance monitoring and risk management. At this stage, the architecture and high-level design of the software system has been established and reviewed. During construction each subsystem will have a final design phase with reviews, followed by implementation and testing. The results of the TMT approach to the Observatory Software development process will only be preliminary at the time of the submittal of this paper, but it is anticipated that the early results will be a favorable indication of progress.

Quality Attributes for Mission Flight Software: A Reference for Architects

Science.gov (United States)

Wilmot, Jonathan; Fesq, Lorraine; Dvorak, Dan

2016-01-01

In the international standards for architecture descriptions in systems and software engineering (ISO/IEC/IEEE 42010), "concern" is a primary concept that often manifests itself in relation to the quality attributes or "ilities" that a system is expected to exhibit - qualities such as reliability, security and modifiability. One of the main uses of an architecture description is to serve as a basis for analyzing how well the architecture achieves its quality attributes, and that requires architects to be as precise as possible about what they mean in claiming, for example, that an architecture supports "modifiability." This paper describes a table, generated by NASA's Software Architecture Review Board, which lists fourteen key quality attributes, identifies different important aspects of each quality attribute and considers each aspect in terms of requirements, rationale, evidence, and tactics to achieve the aspect. This quality attribute table is intended to serve as a guide to software architects, software developers, and software architecture reviewers in the domain of mission-critical real-time embedded systems, such as space mission flight software.

Fourth international workshop on sharing and reusing architectural knowledge (SHARK 2009)

NARCIS (Netherlands)

Lago, P.; Avgeriou, P.; Kruchten, P.; Fickas, S.; Atlee, J.; Inverardi, P.

2009-01-01

Architectural knowledge has been recognized by the software architecture community as a self-contained research area in software architecture, and brought along some promising research directions. In this workshop we discuss the issues that lead to the application of architectural knowledge in

Alternatives generation and analysis report for immobilized low-level waste interim storage architecture

Energy Technology Data Exchange (ETDEWEB)

Burbank, D.A., Westinghouse Hanford

1996-09-01

The Immobilized Low-Level Waste Interim Storage subproject will provide storage capacity for immobilized low-level waste product sold to the U.S. Department of Energy by the privatization contractor. This report describes alternative Immobilized Low-Level Waste storage system architectures, evaluation criteria, and evaluation results to support the Immobilized Low-Level Waste storage system architecture selection decision process.

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service

Science.gov (United States)

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee

2015-01-01

Objectives To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. Methods We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. Results The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. Conclusions We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs. PMID:25995962

The BaBar Software Architecture and Infrastructure

International Nuclear Information System (INIS)

Cosmo, Gabriele

2003-01-01

The BaBar experiment has in place since 1995 a software release system (SRT Software Release Tools) based on CVS (Concurrent Version System) which is in common for all the software developed for the experiment, online or offline, simulation or reconstruction. A software release is a snapshot of all BaBar code (online, offline, utilities, scripts, makefiles, etc.). This set of code is tested to work together, and is indexed by a release number (e.g., 6.8.2) so a user can refer to a particular release and get reproducible results. A release will involve particular versions of packages. A package generally consists of a set of code for a particular task, together with a GNU makefile, scripts and documentation. All BaBar software is maintained in AFS (Andrew File System) directories, so the code is accessible worldwide within the Collaboration. The combination SRT, CVS, AFS, has demonstrated to be a valid, powerful and efficient way of organizing the software infrastructure of a modern HEP experiment with collaborating Institutes distributed worldwide, both in a development and production phase

Pluggable services : a platform architecture for e-commerce

NARCIS (Netherlands)

Aulkemeier, Fabian

2017-01-01

Current architectures for online retail do not provide the right level of flexibility in adopting new services to achieve continuous customer satisfaction and to optimize e-commerce performance. Retailers who rely on pre-packaged or custom-built software are struggling to keep the pace with new

A computer architecture for the implementation of SDL

Energy Technology Data Exchange (ETDEWEB)

Crutcher, L A

1989-01-01

Finite State Machines (FSMs) are a part of well-established automata theory. The FSM model is useful in all stages of system design, from abstract specification to implementation in hardware. The FSM model has been studied as a technique in software design, and the implementation of this type of software considered. The Specification and Description Language (SDL) has been considered in detail as an example of this approach. The complexity of systems designed using SDL warrants their implementation through a programmed computer. A benchmark for the implementation of SDL has been established and the performance of SDL on three particular computer architectures investigated. Performance is judged according to this benchmark and also the ease of implementation, which is related to the confidence of a correct implementation. The implementation on 68000s and transputers is considered as representative of established and state-of-the-art microprocessors respectively. A third architecture that uses a processor that has been proposed specifically for the implementation of SDL is considered as a high-level custom architecture. Analysis and measurements of the benchmark on each architecture indicates that the execution time of SDL decreases by an order of magnitude from the 68000 to the transputer to the custom architecture. The ease of implementation is also greater when the execution time is reduced. A study of some real applications of SDL indicates that the benchmark figures are reflected in user-oriented measures of performance such as data throughput and response time. A high-level architecture such as the one proposed here for SDL can provide benefits in terms of execution time and correctness.

Advanced Information Processing System (AIPS)-based fault tolerant avionics architecture for launch vehicles

Science.gov (United States)

Lala, Jaynarayan H.; Harper, Richard E.; Jaskowiak, Kenneth R.; Rosch, Gene; Alger, Linda S.; Schor, Andrei L.

1990-01-01

An avionics architecture for the advanced launch system (ALS) that uses validated hardware and software building blocks developed under the advanced information processing system program is presented. The AIPS for ALS architecture defined is preliminary, and reliability requirements can be met by the AIPS hardware and software building blocks that are built using the state-of-the-art technology available in the 1992-93 time frame. The level of detail in the architecture definition reflects the level of detail available in the ALS requirements. As the avionics requirements are refined, the architecture can also be refined and defined in greater detail with the help of analysis and simulation tools. A useful methodology is demonstrated for investigating the impact of the avionics suite to the recurring cost of the ALS. It is shown that allowing the vehicle to launch with selected detected failures can potentially reduce the recurring launch costs. A comparative analysis shows that validated fault-tolerant avionics built out of Class B parts can result in lower life-cycle-cost in comparison to simplex avionics built out of Class S parts or other redundant architectures.

One-Click Data Analysis Software for Science Operations

Science.gov (United States)

Navarro, Vicente

2015-12-01

One of the important activities of ESA Science Operations Centre is to provide Data Analysis Software (DAS) to enable users and scientists to process data further to higher levels. During operations and post-operations, Data Analysis Software (DAS) is fully maintained and updated for new OS and library releases. Nonetheless, once a Mission goes into the "legacy" phase, there are very limited funds and long-term preservation becomes more and more difficult. Building on Virtual Machine (VM), Cloud computing and Software as a Service (SaaS) technologies, this project has aimed at providing long-term preservation of Data Analysis Software for the following missions: - PIA for ISO (1995) - SAS for XMM-Newton (1999) - Hipe for Herschel (2009) - EXIA for EXOSAT (1983) Following goals have guided the architecture: - Support for all operations, post-operations and archive/legacy phases. - Support for local (user's computer) and cloud environments (ESAC-Cloud, Amazon - AWS). - Support for expert users, requiring full capabilities. - Provision of a simple web-based interface. This talk describes the architecture, challenges, results and lessons learnt gathered in this project.

RAGE Architecture for Reusable Serious Gaming Technology Components

Directory of Open Access Journals (Sweden)

Wim van der Vegt

2016-01-01

Full Text Available For seizing the potential of serious games, the RAGE project—funded by the Horizon-2020 Programme of the European Commission—will make available an interoperable set of advanced technology components (software assets that support game studios at serious game development. This paper describes the overall software architecture and design conditions that are needed for the easy integration and reuse of such software assets in existing game platforms. Based on the component-based software engineering paradigm the RAGE architecture takes into account the portability of assets to different operating systems, different programming languages, and different game engines. It avoids dependencies on external software frameworks and minimises code that may hinder integration with game engine code. Furthermore it relies on a limited set of standard software patterns and well-established coding practices. The RAGE architecture has been successfully validated by implementing and testing basic software assets in four major programming languages (C#, C++, Java, and TypeScript/JavaScript, resp.. Demonstrator implementation of asset integration with an existing game engine was created and validated. The presented RAGE architecture paves the way for large scale development and application of cross-engine reusable software assets for enhancing the quality and diversity of serious gaming.

Towards a semantic web layered architecture

CSIR Research Space (South Africa)

Gerber, AJ

2007-02-01

Full Text Available as an architectural pattern or architectural style [6, 43]. In this section we give a brief description of the con- cepts software architecture and layered architecture. In ad- dition we provide a summary of a list of criteria for layered architectures identified...- els caused some architectural recurrences to evolve. These are described as architectural patterns [6] or architectural styles [43]. Examples of the best known architectural patterns include, but are not limited to, the client/server architectural...

LHCb software strategy

CERN Document Server

Van Herwijnen, Eric

1998-01-01

This document describes the software strategy of the LHCb experiment. The main objective is to reuse designs and code wherever possible; We will implement an architecturally driven design process; This architectural process will be implemented using Object Technology; We aim for platform indepence; try to take advantage of distributed computing and will use industry standards, commercial software and profit from HEP developments; We will implement a common software process and development environment. One of the major problems that we are immediately faced with is the conversion of our current code from Fortran into an Object Oriented language and the conversion of our current developers to Object technology. Some technical terms related to OO programming are defined in Annex A.1

Upper Secondary and Vocational Level Teachers at Social Software

Science.gov (United States)

Valtonen, Teemu; Kontkanen, Sini; Dillon, Patrick; Kukkonen, Jari; Väisänen, Pertti

2014-01-01

This study focuses on upper secondary and vocational level teachers as users of social software i.e. what software they use during their leisure and work and for what purposes they use software in teaching. The study is theorised within a technological pedagogical content knowledge framework, the emphasis is especially on technological knowledge…

Coordinating space telescope operations in an integrated planning and scheduling architecture

Science.gov (United States)

Muscettola, Nicola; Smith, Stephen F.; Cesta, Amedeo; D'Aloisi, Daniela

1992-01-01

The Heuristic Scheduling Testbed System (HSTS), a software architecture for integrated planning and scheduling, is discussed. The architecture has been applied to the problem of generating observation schedules for the Hubble Space Telescope. This problem is representative of the class of problems that can be addressed: their complexity lies in the interaction of resource allocation and auxiliary task expansion. The architecture deals with this interaction by viewing planning and scheduling as two complementary aspects of the more general process of constructing behaviors of a dynamical system. The principal components of the software architecture are described, indicating how to model the structure and dynamics of a system, how to represent schedules at multiple levels of abstraction in the temporal database, and how the problem solving machinery operates. A scheduler for the detailed management of Hubble Space Telescope operations that has been developed within HSTS is described. Experimental performance results are given that indicate the utility and practicality of the approach.

Software defined network architecture based research on load balancing strategy

Science.gov (United States)

You, Xiaoqian; Wu, Yang

2018-05-01

As a new type network architecture, software defined network has the key idea of separating the control place of the network from the transmission plane, to manage and control the network in a concentrated way; in addition, the network interface is opened on the control layer and the data layer, so as to achieve programmable control of the network. Considering that only the single shortest route is taken into the calculation of traditional network data flow transmission, and congestion and resource consumption caused by excessive load of link circuits are ignored, a link circuit load based flow media business QoS gurantee system is proposed in this article to divide the flow in the network into ordinary data flow and QoS flow. In this way, it supervises the link circuit load with the controller so as to calculate reasonable route rapidly and issue the flow table to the exchanger, to finish rapid data transmission. In addition, it establishes a simulation platform to acquire optimized result through simulation experiment.

Models for Evaluating and Improving Architecture Competence

National Research Council Canada - National Science Library

Bass, Len; Clements, Paul; Kazman, Rick; Klein, Mark

2008-01-01

... producing high-quality architectures. This report lays out the basic concepts of software architecture competence and describes four models for explaining, measuring, and improving the architecture competence of an individual...

Hybrid architecture for building secure sensor networks

Science.gov (United States)

Owens, Ken R., Jr.; Watkins, Steve E.

2012-04-01

Sensor networks have various communication and security architectural concerns. Three approaches are defined to address these concerns for sensor networks. The first area is the utilization of new computing architectures that leverage embedded virtualization software on the sensor. Deploying a small, embedded virtualization operating system on the sensor nodes that is designed to communicate to low-cost cloud computing infrastructure in the network is the foundation to delivering low-cost, secure sensor networks. The second area focuses on securing the sensor. Sensor security components include developing an identification scheme, and leveraging authentication algorithms and protocols that address security assurance within the physical, communication network, and application layers. This function will primarily be accomplished through encrypting the communication channel and integrating sensor network firewall and intrusion detection/prevention components to the sensor network architecture. Hence, sensor networks will be able to maintain high levels of security. The third area addresses the real-time and high priority nature of the data that sensor networks collect. This function requires that a quality-of-service (QoS) definition and algorithm be developed for delivering the right data at the right time. A hybrid architecture is proposed that combines software and hardware features to handle network traffic with diverse QoS requirements.

Space Telecommunications Radio System (STRS) Architecture Standard. Release 1.02.1

Science.gov (United States)

Reinhart, Richard C.; Kacpura, Thomas J.; Handler, Louis M.; Hall, C. Steve; Mortensen, Dale J.; Johnson, Sandra K.; Briones, Janette C.; Nappier, Jennifer M.; Downey, Joseph A.; Lux, James P.

2012-01-01

This document contains the NASA architecture standard for software defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer.

Disruptive Logic Architectures and Technologies From Device to System Level

CERN Document Server

Gaillardon, Pierre-Emmanuel; Clermidy, Fabien

2012-01-01

This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural perspective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space. Describes a novel architectural organization for future reconfigurable systems; Includes a complete benchmarking toolflow for emerging technologies; Generalizes the description of reconfigurable circuits in terms of hierarchical levels; Assesses disruptive...

Software Architecture : Framing Stakeholders' Concerns introduction

NARCIS (Netherlands)

Lago, Patricia; Avgeriou, Paris; Hilliard, Rich

2010-01-01

As noted earlier, some stakeholder concerns are well-served today by available architecture viewpoints, frameworks, or ADLs, while others aren't expressible with available, off-the-shelf approaches. Hence the theme of this special issue: exploring the space of architecting in the face of multiple

Hardware And Software Architectures For Reconfigurable Time-Critical Control Tasks

Directory of Open Access Journals (Sweden)

Adam Piłat

2007-01-01

Full Text Available The most popular configuration of the controlled laboratory test-rigs is the personalcomputer (PC equipped with the I/O board. The dedicated software components allowsto conduct a wide range of user-defined tasks. The typical configuration functionality canbe customized by PC hardware components and their programmable reconfiguration. Thenext step in the automatic control system design is the embedded solution. Usually, thedesign process of the embedded control system is supported by the high-level software. Thededicated programming tools support multitasking property of the microcontroller by selectionof different sampling frequencies of algorithm blocks. In this case the multi-layer andmultitasking control strategy can be realized on the chip. The proposed solutions implementrapid prototyping approach. The available toolkits and device drivers integrate system-leveldesign environment and the real-time application software, transferring the functionality ofMATLAB/Simulink programs to PCs or microcontrolers application environment.

Proceedings 10th International Workshop on the Foundations of Coordination Languages and Software Architectures (FOCLASA 2011, Aachen, Germany, September 10, 2011)

NARCIS (Netherlands)

Mousavi, M.R.; Ravara, A.

2011-01-01

Welcome to the proceedings of FOCLASA 2011, the 10th International Workshop on the Foundations of Coordination Languages and Software Architectures. FOCLASA 2011 was held in Aachen, Germany on September 10th, 2011 as a satellite event of CONCUR 2011, the 22nd International Conference on Concurrency

Avionics and Software Project

Data.gov (United States)

National Aeronautics and Space Administration — The goal of the AES Avionics and Software (A&S) project is to develop a reference avionics and software architecture that is based on standards and that can be...

Fifth International Workshop on Sharing and Reusing Architectural Knowledge (SHARK 2010)

NARCIS (Netherlands)

Lago, Patricia; Avgeriou, Paris; Kruchten, Philippe

2010-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Advanced Modular Software Performance Monitoring

CERN Multimedia

CERN. Geneva

2012-01-01

The LHCb software is based on the Gaudi framework, on top of which are built several large and complex software applications. The LHCb experiment is now in the active phase of collecting and analyzing data and significant performance problems arise in the Gaudi based software beginning from High Level Trigger (HLT) programs and ending with data analysis frameworks (DaVinci). It’s not easy to find hot spots in the code - only special tools can help to understand where CPU or memory usage is not reasonable. There exist many performance analyzing tools, but the main problem is that they show reports in terms of class and function names and such information usually is not very useful - the majority of algorithm developers use the Gaudi framework abstractions and usually do not know about functions which lie at the lower level. We will show a new approach which adds to performance reports a higher abstraction level based on knowledge of framework architecture and run-time object properties. A set of profiling to...

Advanced modular software performance monitoring

CERN Document Server

Mazurov, A

2012-01-01

The LHCb software is based on the Gaudi framework, on top of which are built several large and complex software applications. As the LHCb experiment is now in the active phase of collecting and analyzing data, performance problems arise in various parts of the software, from the High Level Trigger (HLT) programs to data analysis frameworks. It is not easy to find hotspots in the code - only specialized tools can help to understand where CPU or memory usage are not reasonable. There exist many performance analyzing tools, but the main problem is that they show reports in terms of class and function names and such information usually is not very useful - the majority of algorithm developers use the Gaudi framework abstractions and usually do not know about functions which lie at the lower level. We will show a new approach which adds to performance reports a higher abstraction level based on knowledge of framework architecture and run-time object properties. A set of profiling tools (based on Intel VTune Amplif...

Architecturally Reconfigurable Development of Mobile Games

DEFF Research Database (Denmark)

Zhang, Weishan

2005-01-01

. Mobile game domain variants could be handled uniformly and traced across all kinds of software assets. The architecture and configuration mechanism in our approach make optimizations that built into meta-components propagated to all product line members. We show this approach with an industrial Role-Playing-Game......Mobile game development must face the problem of multiple hardware and software platforms, which will bring large number of variants. To cut the development and maintenance efforts, in this paper, we present an architecturally reconfigurable software product line approach to develop mobile games...

Autodesk Revit Architecture 2014 review for certification official certification preparation

CERN Document Server

ASCENT center for technical knowledge

2014-01-01

The Autodesk® Revit® Architecture 2014 Review for Certification guide is intended for users of the Autodesk Revit Architecture software who are preparing to complete the Autodesk Revit Architecture 2014 Certified Professional exam. This guide contains a collection of relevant instructional topics, practices, and review questions from the Autodesk Official Training Guides (AOTG) training guides created by ASCENT - Center for Technical Knowledge® and pertaining specifically to the Certified Professional exam topics and objectives. This training guide is intended for experienced users of the Autodesk Revit Architecture software in preparation for certification. New users of the software should refer to the AOTG training guides from ASCENT, such as Autodesk Revit Architecture 2014 Fundamentals, for more comprehensive instruction.

Advanced information processing system: Input/output network management software

Science.gov (United States)

Nagle, Gail; Alger, Linda; Kemp, Alexander

1988-01-01

The purpose of this document is to provide the software requirements and specifications for the Input/Output Network Management Services for the Advanced Information Processing System. This introduction and overview section is provided to briefly outline the overall architecture and software requirements of the AIPS system before discussing the details of the design requirements and specifications of the AIPS I/O Network Management software. A brief overview of the AIPS architecture followed by a more detailed description of the network architecture.

A heterogeneous hierarchical architecture for real-time computing

Energy Technology Data Exchange (ETDEWEB)

Skroch, D.A.; Fornaro, R.J.

1988-12-01

The need for high-speed data acquisition and control algorithms has prompted continued research in the area of multiprocessor systems and related programming techniques. The result presented here is a unique hardware and software architecture for high-speed real-time computer systems. The implementation of a prototype of this architecture has required the integration of architecture, operating systems and programming languages into a cohesive unit. This report describes a Heterogeneous Hierarchial Architecture for Real-Time (H{sup 2} ART) and system software for program loading and interprocessor communication.

Architectural design of experience based factory model for software ...

African Journals Online (AJOL)

architectural design. Automation features are incorporated in the design in which workflow system and intelligent agents are integrated, and the facilitation of cloud environment is empowered to further support the automation. Keywords: architectural design; knowledge management; experience factory; workflow;

Making sense of mobile health data: an open architecture to improve individual- and population-level health.

Science.gov (United States)

Chen, Connie; Haddad, David; Selsky, Joshua; Hoffman, Julia E; Kravitz, Richard L; Estrin, Deborah E; Sim, Ida

2012-08-09

Mobile phones and devices, with their constant presence, data connectivity, and multiple intrinsic sensors, can support around-the-clock chronic disease prevention and management that is integrated with daily life. These mobile health (mHealth) devices can produce tremendous amounts of location-rich, real-time, high-frequency data. Unfortunately, these data are often full of bias, noise, variability, and gaps. Robust tools and techniques have not yet been developed to make mHealth data more meaningful to patients and clinicians. To be most useful, health data should be sharable across multiple mHealth applications and connected to electronic health records. The lack of data sharing and dearth of tools and techniques for making sense of health data are critical bottlenecks limiting the impact of mHealth to improve health outcomes. We describe Open mHealth, a nonprofit organization that is building an open software architecture to address these data sharing and "sense-making" bottlenecks. Our architecture consists of open source software modules with well-defined interfaces using a minimal set of common metadata. An initial set of modules, called InfoVis, has been developed for data analysis and visualization. A second set of modules, our Personal Evidence Architecture, will support scientific inferences from mHealth data. These Personal Evidence Architecture modules will include standardized, validated clinical measures to support novel evaluation methods, such as n-of-1 studies. All of Open mHealth's modules are designed to be reusable across multiple applications, disease conditions, and user populations to maximize impact and flexibility. We are also building an open community of developers and health innovators, modeled after the open approach taken in the initial growth of the Internet, to foster meaningful cross-disciplinary collaboration around new tools and techniques. An open mHealth community and architecture will catalyze increased mHealth efficiency

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

Energy Technology Data Exchange (ETDEWEB)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot`s own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup.

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

International Nuclear Information System (INIS)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot's own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup

Distribution and communication in software engineering environments. Application to the HELIOS Software Bus.

OpenAIRE

Jean, F. C.; Jaulent, M. C.; Coignard, J.; Degoulet, P.

1991-01-01

Modularity, distribution and integration are current trends in Software Engineering. To reach these goals HELIOS, a distributive Software Engineering Environment dedicated to the medical field, has been conceived and a prototype implemented. This environment is made by the collaboration of several, well encapsulated Software Components. This paper presents the architecture retained to allow communication between the different components and focus on the implementation details of the Software ...

Multilevel architectures for electronic document retrieval

International Nuclear Information System (INIS)

Rome, J.A.; Tolliver, J.S.

1997-01-01

Traditionally, most classified computer systems run at the highest level of any of the data on the system, and all users must be cleared to this security level. This architecture precludes the use of low-level (pay and clearance) personnel for such tasks as data entry, and makes sharing data with other entities difficult. The government is trying to solve this problem by the introduction of multilevel-secure (MLS) computer systems. In addition, wherever possible, there is pressure to use commercial off-the-shelf software (COTS) to improve reliability, and to reduce purchase and maintenance costs. This paper presents two architectures for an MLS electronic document retrieval system using COTS products. Although the authors believe that the resulting systems represent a real advance in usability, scaleability, and scope, the disconnect between existing security rules and regulations and the rapidly-changing state of technology will make accreditation of such systems a challenge

A meta-level architecture for strategic reasoning in naval planning (Extended abstract)

NARCIS (Netherlands)

Hoogendoorn, M.; Jonker, C.M.; van Maanen, P.P.; Treur, J.

2005-01-01

The management of naval organizations aims at the maximization of mission success by means of monitoring, planning, and strategic reasoning. This paper presents a meta-level architecture for strategic reasoning in naval planning. The architecture is instantiated with decision knowledge acquired from

Towards recovering the software architecture of microservice-based systems

NARCIS (Netherlands)

Granchelli, Giona; Cardarelli, Mario; Francesco, Paolo Di; Malavolta, Ivano; Iovino, Ludovico; Salle, Amleto Di

2017-01-01

Today the microservice architectural style is being adopted by many key technological players such as Netflix, Amazon, The Guardian. A microservice architecture is composed of a large set of small services, each running in its own process and communicating with lightweight mechanisms (often via REST

Aligning Application Architecture to the Business Context

NARCIS (Netherlands)

Wieringa, Roelf J.; Blanken, Henk; Fokkinga, M.M.; Grefen, P.W.P.J.; Eder, J.; Missikoff, M.

Alignment of application architecture to business architecture is a central problem in the design, acquisition and implementation of information systems in current large-scale information-processing organizations. Current research in architecture alignment is either too strategic or too software

GiA Roots: software for the high throughput analysis of plant root system architecture

Science.gov (United States)

2012-01-01

Background Characterizing root system architecture (RSA) is essential to understanding the development and function of vascular plants. Identifying RSA-associated genes also represents an underexplored opportunity for crop improvement. Software tools are needed to accelerate the pace at which quantitative traits of RSA are estimated from images of root networks. Results We have developed GiA Roots (General Image Analysis of Roots), a semi-automated software tool designed specifically for the high-throughput analysis of root system images. GiA Roots includes user-assisted algorithms to distinguish root from background and a fully automated pipeline that extracts dozens of root system phenotypes. Quantitative information on each phenotype, along with intermediate steps for full reproducibility, is returned to the end-user for downstream analysis. GiA Roots has a GUI front end and a command-line interface for interweaving the software into large-scale workflows. GiA Roots can also be extended to estimate novel phenotypes specified by the end-user. Conclusions We demonstrate the use of GiA Roots on a set of 2393 images of rice roots representing 12 genotypes from the species Oryza sativa. We validate trait measurements against prior analyses of this image set that demonstrated that RSA traits are likely heritable and associated with genotypic differences. Moreover, we demonstrate that GiA Roots is extensible and an end-user can add functionality so that GiA Roots can estimate novel RSA traits. In summary, we show that the software can function as an efficient tool as part of a workflow to move from large numbers of root images to downstream analysis. PMID:22834569

High-Level Synthesis: Productivity, Performance, and Software Constraints

Directory of Open Access Journals (Sweden)

Yun Liang

2012-01-01

Full Text Available FPGAs are an attractive platform for applications with high computation demand and low energy consumption requirements. However, design effort for FPGA implementations remains high—often an order of magnitude larger than design effort using high-level languages. Instead of this time-consuming process, high-level synthesis (HLS tools generate hardware implementations from algorithm descriptions in languages such as C/C++ and SystemC. Such tools reduce design effort: high-level descriptions are more compact and less error prone. HLS tools promise hardware development abstracted from software designer knowledge of the implementation platform. In this paper, we present an unbiased study of the performance, usability and productivity of HLS using AutoPilot (a state-of-the-art HLS tool. In particular, we first evaluate AutoPilot using the popular embedded benchmark kernels. Then, to evaluate the suitability of HLS on real-world applications, we perform a case study of stereo matching, an active area of computer vision research that uses techniques also common for image denoising, image retrieval, feature matching, and face recognition. Based on our study, we provide insights on current limitations of mapping general-purpose software to hardware using HLS and some future directions for HLS tool development. We also offer several guidelines for hardware-friendly software design. For popular embedded benchmark kernels, the designs produced by HLS achieve 4X to 126X speedup over the software version. The stereo matching algorithms achieve between 3.5X and 67.9X speedup over software (but still less than manual RTL design with a fivefold reduction in design effort versus manual RTL design.

A High-Level Functional Architecture for GNSS-Based Road Charging Systems

DEFF Research Database (Denmark)

Zabic, Martina

2011-01-01

, a short introduction is provided followed by a presentation of the system engineering methodology to illustrate how and why system architectures can be beneficial for GNSS-based road charging systems. Hereafter, a basic set of system functions is determined based on functional system requirements, which...... charging systems, it is important to highlight the overall system architecture which is the framework that defines the basic functions and important concepts of the system. This paper presents a functional architecture for GNSS-based road charging systems based on the concepts of system engineering. First...... defines the necessary tasks that these systems must accomplish. Finally, this paper defines the system functionalities; and provides a generic high-level functional architecture for GNSS-based road charging systems....

Formalizing correspondence rules for automotive architectural views

NARCIS (Netherlands)

Dajsuren, Y.; Gerpheide, C.M.; Serebrenik, A.; Wijs, A.J.; Vasilescu, B.N.; Brand, van den M.G.J.; Seinturier, L.; Bures, T.; McGregor, J.D.

2014-01-01

Architecture views have long been used in software industry to systematically model complex systems by representing them from the perspective of related stakeholder concerns. However, consensus has not been reached for the architecture views between automotive architecture description languages and

A Case of Engineering Quality for Mobile Healthcare Applications Using Augmented Personal Software Process Improvement

Directory of Open Access Journals (Sweden)

Shahbaz Ahmed Khan Ghayyur

2016-01-01

Full Text Available Mobile healthcare systems are currently considered as key research areas in the domain of software engineering. The adoption of modern technologies, for mobile healthcare systems, is a quick option for industry professionals. Software architecture is a key feature that contributes towards a software product, solution, or services. Software architecture helps in better communication, documentation of design decisions, risks identification, basis for reusability, scalability, scheduling, and reduced maintenance cost and lastly it helps to avoid software failures. Hence, in order to solve the abovementioned issues in mobile healthcare, the software architecture is integrated with personal software process. Personal software process has been applied successfully but it is unable to address the issues related to architectural design and evaluation capabilities. Hence, a new technique architecture augmented personal process is presented in order to enhance the quality of the mobile healthcare systems through the use of architectural design with integration of personal software process. The proposed process was validated by case studies. It was found that the proposed process helped in reducing the overall costs and effort. Moreover, an improved architectural design helped in development of high quality mobile healthcare system.

Software architecture analysis of usability

NARCIS (Netherlands)

Folmer, E; van Gurp, J; Bosch, J; Bastide, R; Palanque, P; Roth, J

2005-01-01

Studies of software engineering projects show that a large number of usability related change requests are made after its deployment. Fixing usability problems during the later stages of development often proves to be costly, since many of the necessary changes require changes to the system that

Software product family evaluation

NARCIS (Netherlands)

van der Linden, F; Bosch, J; Kamsties, E; Kansala, K; Krzanik, L; Obbink, H; VanDerLinden, F

2004-01-01

This paper proposes a 4-dimensional software product family engineering evaluation model. The 4 dimensions relate to the software engineering concerns of business, architecture, organisation and process. The evaluation model is meant to be used within organisations to determine the status of their

Contemporary moment of residential architecture at the global level: HOUSING 15

Directory of Open Access Journals (Sweden)

Petrović Vladana

2017-01-01

Full Text Available 'That architectonic exhibitions are an indispensable and significant part of the history of architecture has been proven by numerous exhibitions dating back from the first decades of the 20th century, the Paris exhibitions (Salon d'Automne, where three manifest exhibition designs by Le Corbusier were presented, promoting a new system of values of the forthcoming modernist movement, then the Berlin exhibitions in the second half of the 20th century (Interbau 1957, IBA 1987 where the Postmodern was promoted, up to the second decade of the 21st century and the Biennial in Venice (La Biennale di Venezia, 2014, whose uniting topic was One Hundred Years of ,Modernity' (prof arch Darko Marušić, quote from the catalogue of the HOUSING 15. HOUSING 15 is an exhibition that was created on the initiative of the Department of Residential Building, Faculty of Civil Engineering and Architecture, University of Nis, in order to present the modern housing architecture at the global level. The exhibition was shown at the BINA 2016 and was followed by a round table discussion upon the topic Contemporary moment of residential architecture at the global level. The idea of the round table was to compare domestic and international experience in this field and draw attention toward the attitude on the present, electronic time considering the development of the residential architecture. The specificity of this exhibition, compared to the other events of a similar nature, is that in addition to architectural design the scientific expert reviews for the selected works are also presented, given by the international scientific and artistic committee of the exhibition. The paper is the summary of the discussion held at the round table, and it presents the potential problems, answers and conclusions relating to residential architecture today from the professional perspective.

Orthographic Software Modelling: A Novel Approach to View-Based Software Engineering

Science.gov (United States)

Atkinson, Colin

The need to support multiple views of complex software architectures, each capturing a different aspect of the system under development, has been recognized for a long time. Even the very first object-oriented analysis/design methods such as the Booch method and OMT supported a number of different diagram types (e.g. structural, behavioral, operational) and subsequent methods such as Fusion, Kruchten's 4+1 views and the Rational Unified Process (RUP) have added many more views over time. Today's leading modeling languages such as the UML and SysML, are also oriented towards supporting different views (i.e. diagram types) each able to portray a different facets of a system's architecture. More recently, so called enterprise architecture frameworks such as the Zachman Framework, TOGAF and RM-ODP have become popular. These add a whole set of new non-functional views to the views typically emphasized in traditional software engineering environments.

Evaluating a Service-Oriented Architecture

Science.gov (United States)

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

The StoreGate: a Data Model for the Atlas Software Architecture

CERN Document Server

INSPIRE-00070566; Leggett, C.G.; Quarrie, D.R.; Ma, H.; Rajagopalan, S.; CHEP 2003 Computing in High Energy Physics

2003-01-01

The Atlas collaboration at CERN has adopted the Gaudi software architecture which belongs to the blackboard family: data objects produced by knowledge sources (e.g. reconstruction modules) are posted to a common in-memory data base from where other modules can access them and produce new data objects. The StoreGate has been designed, based on the Atlas requirements and the experience of other HENP systems such as Babar, CDF, CLEO, D0 and LHCB, to identify in a simple and efficient fashion (collections of) data objects based on their type and/or the modules which posted them to the Transient Data Store (the blackboard). The developer also has the freedom to use her preferred key class to uniquely identify a data object according to any other criterion. Besides this core functionality, the StoreGate provides the developers with a powerful interface to handle in a coherent fashion persistable references, object lifetimes, memory management and access control policy for the data objects in the Store. It also prov...

Documenting the ICT Architecture of TSI

NARCIS (Netherlands)

Wieringa, Roelf J.; Blanken, Henk; Fokkinga, M.M.

2001-01-01

We use the business and software architecture of Travel Service International (TSI) as a case study to validate our approach to ICT architecture. The techniques discussed are explained at length in a textbook by Wieringa.

RISC. A new style in the design of architectures

International Nuclear Information System (INIS)

Cortadella, J.; Gonzalez, A.; Llaberia, J.M.

1988-01-01

In the 80's a new architecture design and implementation style has appeared: the RISC style. It proposes an overall view of the system were the processor is included. For each function, an extensive analysis has to be performed in order to evaluate the advantages and disadvantages that hardware and software introduce in the design. An optimum design involved an agreement between both levels and has to take into account cost, performance, and technological factors. In this paper, the main features of this new architecture design style are presented. (Author)

Service-oriented architecture for the ARGOS instrument control software

Science.gov (United States)

Borelli, J.; Barl, L.; Gässler, W.; Kulas, M.; Rabien, Sebastian

2012-09-01

The Advanced Rayleigh Guided ground layer Adaptive optic System, ARGOS, equips the Large Binocular Telescope (LBT) with a constellation of six rayleigh laser guide stars. By correcting atmospheric turbulence near the ground, the system is designed to increase the image quality of the multi-object spectrograph LUCIFER approximately by a factor of 3 over a field of 4 arc minute diameter. The control software has the critical task of orchestrating several devices, instruments, and high level services, including the already existing adaptive optic system and the telescope control software. All these components are widely distributed over the telescope, adding more complexity to the system design. The approach used by the ARGOS engineers is to write loosely coupled and distributed services under the control of different ownership systems, providing a uniform mechanism to offer, discover, interact and use these distributed capabilities. The control system counts with several finite state machines, vibration and flexure compensation loops, and safety mechanism, such as interlocks, aircraft, and satellite avoidance systems.

An Architectural Decision Tool Based on Scenarios and Non-functional Requirements

OpenAIRE

Mr. Mahesh Parmar; Prof. W.U. Khan; Dr. Binod Kumar

2011-01-01

Software architecture design is often based on architects intuition and previous experience. Little methodological support is available, but there are still no effective solutions to guide the architectural design. The most difficult activity is the transformation from non-functional requirement specification into software architecture. To achieve above things proposed “An Architectural Decision Tool Based on Scenarios and Nonfunctional Requirementsâ€. In this proposed tool scenarios are fi...

Developments in architecture for real-time data systems

International Nuclear Information System (INIS)

Heath, R.L.; Myers, W.R.

1975-01-01

Real-time data systems typically operate at two levels: a fast-response instrument-oriented level for data acquisition and control, and a slow human-oriented level for interaction and computation. Traditional minicomputer data systems support real-time applications by implementation of background/foreground software. Recent developments in computer technology including microprocessors enable the functional organization of hardware in distributed or hierarchical form to provide new system structures for real-time requirements. Examples of systems with distributed architecture will be discussed in detail

EOS MLS Level 2 Data Processing Software Version 3

Science.gov (United States)

Livesey, Nathaniel J.; VanSnyder, Livesey W.; Read, William G.; Schwartz, Michael J.; Lambert, Alyn; Santee, Michelle L.; Nguyen, Honghanh T.; Froidevaux, Lucien; wang, Shuhui; Manney, Gloria L.;

The Effective Use of System and Software Architecture Standards for Software Technology Readiness Assessments

Science.gov (United States)

2011-05-01

icons, mouse- control and network paradigms. Successfully directed engineering and quality process development on all levels of the enterprise. As...Actual system proven through successful mission operations A t l t l t d d lifi d th h t t d TRL 9 TRL 8 c ua sys em comp e e an qua e roug es an...A Software Technology Example • Net Centricity – a typical, new mission requirement – Network Centric Warfare (NCW) • NCW is a state-of-the art war

Architectural mismatch issues in identity management deployment

DEFF Research Database (Denmark)

Andersen, Mads Schaarup

2010-01-01

Integrating Commercial Off-The-Shelf products in a company's software product portfolio offers business value, but introduces challenges from a software architecture perspective. In this paper, the research challenges in relation to identity management in the Danish municipality administration...... system called Opus, are outlined. Opus BRS is the identity management part of Opus. Opus integrates SAP, legacy mainframe systems, and other third party systems of the individual municipality. Each of these systems define their own software architecture and access control model, leading to architectural...... mismatch with an impact on security, usability, and maintainability. The research project is discussed and access control and identity provisioning are recognized as the major areas of interest in relation to the mismatch challenges. The project is carried out in close cooperation with KMD, one...

Architecture Approach in System Development

Directory of Open Access Journals (Sweden)

Ladislav Burita

2017-01-01

Full Text Available The purpose of this paper is to describe a practical solution of architecture approach in system development. The software application is the system which optimizes the transport service. The first part of the paper defines the enterprise architecture, its parts and frameworks. Next is explained the NATO Architecture Framework (NAF, a tool for command and control systems development in military environment. The NAF is used for architecture design of the system for optimization of the transport service.

NASA/NBS (National Aeronautics and Space Administration/National Bureau of Standards) standard reference model for telerobot control system architecture (NASREM)

Science.gov (United States)

Albus, James S.; Mccain, Harry G.; Lumia, Ronald

1989-01-01

The document describes the NASA Standard Reference Model (NASREM) Architecture for the Space Station Telerobot Control System. It defines the functional requirements and high level specifications of the control system for the NASA space Station document for the functional specification, and a guideline for the development of the control system architecture, of the 10C Flight Telerobot Servicer. The NASREM telerobot control system architecture defines a set of standard modules and interfaces which facilitates software design, development, validation, and test, and make possible the integration of telerobotics software from a wide variety of sources. Standard interfaces also provide the software hooks necessary to incrementally upgrade future Flight Telerobot Systems as new capabilities develop in computer science, robotics, and autonomous system control.

Technical Reference Suite Addressing Challenges of Providing Assurance for Fault Management Architectural Design

Science.gov (United States)

Fitz, Rhonda; Whitman, Gerek

2016-01-01

Research into complexities of software systems Fault Management (FM) and how architectural design decisions affect safety, preservation of assets, and maintenance of desired system functionality has coalesced into a technical reference (TR) suite that advances the provision of safety and mission assurance. The NASA Independent Verification and Validation (IV&V) Program, with Software Assurance Research Program support, extracted FM architectures across the IV&V portfolio to evaluate robustness, assess visibility for validation and test, and define software assurance methods applied to the architectures and designs. This investigation spanned IV&V projects with seven different primary developers, a wide range of sizes and complexities, and encompassed Deep Space Robotic, Human Spaceflight, and Earth Orbiter mission FM architectures. The initiative continues with an expansion of the TR suite to include Launch Vehicles, adding the benefit of investigating differences intrinsic to model-based FM architectures and insight into complexities of FM within an Agile software development environment, in order to improve awareness of how nontraditional processes affect FM architectural design and system health management. The identification of particular FM architectures, visibility, and associated IV&V techniques provides a TR suite that enables greater assurance that critical software systems will adequately protect against faults and respond to adverse conditions. Additionally, the role FM has with regard to strengthened security requirements, with potential to advance overall asset protection of flight software systems, is being addressed with the development of an adverse conditions database encompassing flight software vulnerabilities. Capitalizing on the established framework, this TR suite provides assurance capability for a variety of FM architectures and varied development approaches. Research results are being disseminated across NASA, other agencies, and the

SaaS architecture and pricing models

OpenAIRE

Laatikainen, Gabriella; Ojala, Arto

2014-01-01

In the new era of computing, SaaS software with different architectural characteristics might be priced in different ways. Even though both pricing and architectural characteristics are responsible for the success of the offering; the relationship between architectural and pricing characteristics has not been studied before. The present study fills this gap by employing a multi-case research. The findings accentuate that flexible and well-designed architecture enables different pricing models...

Component-based software for high-performance scientific computing

Energy Technology Data Exchange (ETDEWEB)

Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

2005-01-01

Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly.

Component-based software for high-performance scientific computing

International Nuclear Information System (INIS)

Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

2005-01-01

Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly

TEACHING CAD PROGRAMMING TO ARCHITECTURE STUDENTS

Directory of Open Access Journals (Sweden)

Maria Gabriela Caffarena CELANI

2008-11-01

Full Text Available The objective of this paper is to discuss the relevance of including the discipline of computer programming in the architectural curriculum. To do so I start by explaining how computer programming has been applied in other educational contexts with pedagogical success, describing Seymour Papert's principles. After that, I summarize the historical development of CAD and provide three historical examples of educational applications of computer programming in architecture, followed by a contemporary case that I find of particular relevance. Next, I propose a methodology for teaching programming for architects that aims at improving the quality of designs by making their concepts more explicit. This methodology is based on my own experience teaching computer programming for architecture students at undergraduate and graduate levels at the State University of Campinas, Brazil. The paper ends with a discussion about the role of programming nowadays, when most CAD software are user-friendly and do not require any knowledge of programming for improving performance. I conclude that the introduction of programming in the CAD curriculum within a proper conceptual framework may transform the concept of architectural education. Key-words: Computer programming; computer-aided design; architectural education.

Selection of a Data Acquisition and Controls System Communications and Software Architecture for Johnson Space Center's Space Environment Simulation Laboratory Thermal and Vacuum Test Facilities

Science.gov (United States)

Jordan, Eric A.

2004-01-01

Upgrade of data acquisition and controls systems software at Johnson Space Center's Space Environment Simulation Laboratory (SESL) involved the definition, evaluation and selection of a system communication architecture and software components. A brief discussion of the background of the SESL and its data acquisition and controls systems provides a context for discussion of the requirements for each selection. Further framework is provided as upgrades to these systems accomplished in the 1990s and in 2003 are compared to demonstrate the role that technological advances have had in their improvement. Both of the selections were similar in their three phases; 1) definition of requirements, 2) identification of candidate products and their evaluation and testing and 3) selection by comparison of requirement fulfillment. The candidates for the communication architecture selection embraced several different methodologies which are explained and contrasted. Requirements for this selection are presented and the selection process is described. Several candidates for the software component of the data acquisition and controls system are identified, requirements for evaluation and selection are presented, and the evaluation process is described.

基于 Struts 框架的软件实训系统%Software Training System Based on Struts Architecture

Institute of Scientific and Technical Information of China (English)

龚雄兴; 宁彬; 袁磊

2012-01-01

　　基于Struts框架的软件实训系统主要是利用Web技术实现软件实训实践过程的网络化、信息化。文章分析了以 Struts 框架为技术基础的软件实训系统的设计与实现，改进了该系统应用及维护中的安全控制和中文请求响应设计，以更符合建设软件实训系统的现实需求。%　　Software training system mainly uses Web technique to realize cyberization and informatization of teaching process on software training. Based on Struts architecture, it analyzes the design and realization of the software training system. Then safety control and response to Chinese language during the application are improved.

A Reference Architecture for a Cloud-Based Tools as a Service Workspace

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

2015-01-01

Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

Multiprocessor architecture: Synthesis and evaluation

Science.gov (United States)

Standley, Hilda M.

1990-01-01

Multiprocessor computed architecture evaluation for structural computations is the focus of the research effort described. Results obtained are expected to lead to more efficient use of existing architectures and to suggest designs for new, application specific, architectures. The brief descriptions given outline a number of related efforts directed toward this purpose. The difficulty is analyzing an existing architecture or in designing a new computer architecture lies in the fact that the performance of a particular architecture, within the context of a given application, is determined by a number of factors. These include, but are not limited to, the efficiency of the computation algorithm, the programming language and support environment, the quality of the program written in the programming language, the multiplicity of the processing elements, the characteristics of the individual processing elements, the interconnection network connecting processors and non-local memories, and the shared memory organization covering the spectrum from no shared memory (all local memory) to one global access memory. These performance determiners may be loosely classified as being software or hardware related. This distinction is not clear or even appropriate in many cases. The effect of the choice of algorithm is ignored by assuming that the algorithm is specified as given. Effort directed toward the removal of the effect of the programming language and program resulted in the design of a high-level parallel programming language. Two characteristics of the fundamental structure of the architecture (memory organization and interconnection network) are examined.

Hardware and software architecture for the integration of the new EC waves launcher in FTU control system

Energy Technology Data Exchange (ETDEWEB)

Boncagni, L. [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy); Centioli, C., E-mail: cristina.centioli@enea.it [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy); Galperti, C.; Alessi, E.; Granucci, G. [Associazione EURATOM-ENEA-CNR sulla Fusione – IFP-CNR, Via Roberto Cozzi, 53 20125 Milano (Italy); Grosso, L.A. [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy); Marchetto, C. [Associazione EURATOM-ENEA-CNR sulla Fusione – IFP-CNR, Via Roberto Cozzi, 53 20125 Milano (Italy); Napolitano, M. [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy); Nowak, S. [Associazione EURATOM-ENEA-CNR sulla Fusione – IFP-CNR, Via Roberto Cozzi, 53 20125 Milano (Italy); Panella, M. [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy); Sozzi, C. [Associazione EURATOM-ENEA-CNR sulla Fusione – IFP-CNR, Via Roberto Cozzi, 53 20125 Milano (Italy); Tilia, B.; Vitale, V. [Associazione EURATOM-ENEA sulla Fusione – ENEA, Via Enrico Fermi, 45 00045 Frascati (RM) (Italy)

2013-10-15

Highlights: ► The integration of a new ECRH launcher to FTU legacy control system is reported. ► Fast control has been developed with a three-node RT cluster within MARTe framework. ► Slow control was implemented with a Simatic S7 PLC and an EPICS IOC-CA application. ► The first results have assessed the feasibility of the launcher control architecture. -- Abstract: The role of high power electron cyclotron (EC) waves in controlling magnetohydrodynamic (MHD) instabilities in tokamaks has been assessed in several experiments, exploiting the physical effects induced by resonant heating and current drive. Recently a new EC launcher, whose main goal is controlling tearing modes and possibly preventing their onset, is being implemented on FTU. So far most of the components of the launcher control strategy have been realized and successfully tested on plasma experiments. Nevertheless the operations of the new launcher must be completely integrated into the existing one, and to FTU control system. This work deals with this final step, proposing a hardware and software architecture implementing up to date technologies, to achieve a modular and effective control strategy well integrated into a legacy system. The slow control system of the new EC launcher is based on a Siemens S7 Programmable Logic Controller (PLC), integrated into FTU control system supervisor through an EPICS input output controller (IOC) and an in-house developed Channel Access client application creating an abstraction layer that decouples the IOC and the PLC from the FTU Supervisor software. This architecture could enable a smooth migration to an EPICS-only supervisory control system. The real time component of the control system is based on the open source MARTe framework relying on a Linux real time cluster, devoted to the detection of MHD instabilities and the calculation of the injection angles and the time reference for the radiofrequency power enable commands for the EC launcher.

Human Value And Soft Skill In Diploma Level Architectural Education

Directory of Open Access Journals (Sweden)

Dr. Sarita Dash

2017-09-01

Full Text Available In todays economic scenario the rising incomes and expectations in the wake of rapid urbanization has created a crying need for creation of value concept in the appropriate climate which will encourage emergence of good human-beings a band of worthy as well as socially responsible professionals and will eventually lead to the creation of a good society. So this paper has been designed to look at the present status of Architectural Education at Diploma level in a dynamic society. To meet the demands of the changing needs of the changing society the future architectural education should address some pertinent issues regarding soft skills which has been discussed in this paper. A little measure has been taken to explain that the innovations and practices in architectural education will impose new demands on the teachers who are mainly responsible for the rectification of the foundation at root level to cultivate the human values as a part of their teachings. The paper has also talked about the outcome of evaluation that necessitates the change in education to express the qualitative significance to human consciousness.

A software methodology for compiling quantum programs

Science.gov (United States)

Häner, Thomas; Steiger, Damian S.; Svore, Krysta; Troyer, Matthias

2018-04-01

Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of abstraction and their differences and similarities to classical layers of a computer-aided design flow. For each layer of the stack, we discuss the underlying methods for compilation and optimization. Our software methodology facilitates more rapid innovation among quantum algorithm designers, quantum hardware engineers, and experimentalists. It enables scalable compilation of complex quantum algorithms and can be targeted to any specific quantum hardware implementation.

An emergency management demonstrator using the high level architecture

International Nuclear Information System (INIS)

Williams, R.J.

1996-12-01

This paper addresses the issues of simulation interoperability within the emergency management training context. A prototype implementation in Java of a subset of the High Level Architecture (HLA) is described. The use of Web Browsers to provide graphical user interfaces to HLA is also investigated. (au)

Enhancing Architecture-Implementation Conformance with Change Management and Support for Behavioral Mapping

Science.gov (United States)

Zheng, Yongjie

2012-01-01

Software architecture plays an increasingly important role in complex software development. Its further application, however, is challenged by the fact that software architecture, over time, is often found not conformant to its implementation. This is usually caused by frequent development changes made to both artifacts. Against this background,…

Ragnarok: An Architecture Based Software Development Environment

OpenAIRE

Christensen, Henrik Bærbak

1999-01-01

The Ragnarok project is an experimental computer science project within the field of software development environments. Taking current problems in software engineering as starting point, a small set of hypotheses are proposed, outlining plausible solutions for problems concerning the management of the development process and its associated data, and outlining how these solutions can be supported directly in a development environment. These hypotheses are all deeply rooted in the viewpoint tha...

Patterns for Parallel Software Design

CERN Document Server

Ortega-Arjona, Jorge Luis

2010-01-01

Essential reading to understand patterns for parallel programming Software patterns have revolutionized the way we think about how software is designed, built, and documented, and the design of parallel software requires you to consider other particular design aspects and special skills. From clusters to supercomputers, success heavily depends on the design skills of software developers. Patterns for Parallel Software Design presents a pattern-oriented software architecture approach to parallel software design. This approach is not a design method in the classic sense, but a new way of managin

Deep Space Network information system architecture study

Science.gov (United States)

Beswick, C. A.; Markley, R. W. (Editor); Atkinson, D. J.; Cooper, L. P.; Tausworthe, R. C.; Masline, R. C.; Jenkins, J. S.; Crowe, R. A.; Thomas, J. L.; Stoloff, M. J.

1992-01-01

The purpose of this article is to describe an architecture for the DSN information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990's. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies--i.e., computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control.

Integrated conception of hardware/software mixed systems used in nuclear instrumentation

International Nuclear Information System (INIS)

Dias, Ailton F.; Sorel, Yves; Akil, Mohamed

2002-01-01

Hardware/software codesign carries out the design of systems composed by a hardware portion, with specific components, and a software portion, with microprocessor based architecture. This paper describes the Algorithm Architecture Adequation (AAA) design methodology - originally oriented to programmable multicomponent architectures, its extension to reconfigurable circuits and its application to design and development of nuclear instrumentation systems composed by programmable and configurable circuits. AAA methodology uses an unified model to describe algorithm, architecture and implementation, based on graph theory. The great advantage of AAA methodology is the utilization of a same model from the specification to the implementation of hardware/software systems, reducing the complexity and design time. (author)

Software Service Engineering : Tenets and Challenges

NARCIS (Netherlands)

Heuvel, Willem-Jan van den; Zimmermann, Olaf; Leymann, Frank; Lago, Patricia; Schieferdecker, Ina; Zdun, Uwe; Avgeriou, Paris

2009-01-01

Service-Oriented Architecture (SOA) constitutes a modern, standards-based and technology-independent paradigm and architectural style for distributed enterprise computing. The SOA style promotes the publishing, discovery, and binding of loosely-coupled, network-accessible software services. With SOA

Relating Business Goals to Architecturally Significant Requirements for Software Systems

Science.gov (United States)

2010-05-01

must respond within five seconds” [ EPF 2010]. A major source of architecturally significant requirements is the set of business goals that led to the...Projects for Competitive Advantage, Center for Business Practices, 1999. [ EPF 2010] Eclipse Process Framework Project. Concept: Architecturally

Architectural Analysis of Dynamically Reconfigurable Systems

Science.gov (United States)

Lindvall, Mikael; Godfrey, Sally; Ackermann, Chris; Ray, Arnab; Yonkwa, Lyly

2010-01-01

oTpics include: the problem (increased flexibility of architectural styles decrease analyzability, behavior emerges and varies depending on the configuration, does the resulting system run according to the intended design, and architectural decisions can impede or facilitate testing); top down approach to architecture analysis, detection of defects and deviations, and architecture and its testability; currently targeted projects GMSEC and CFS; analyzing software architectures; analyzing runtime events; actual architecture recognition; GMPUB in Dynamic SAVE; sample output from new approach; taking message timing delays into account; CFS examples of architecture and testability; some recommendations for improved testablity; and CFS examples of abstract interfaces and testability; CFS example of opening some internal details.

Unibert - PC software for radiometric level gauging - the LB440 measuring system

International Nuclear Information System (INIS)

Mann, H.; Bickert, M.

2001-01-01

In almost all industrial branches radiometric measuring systems are being used today for a lot of different tasks. The most common field of this application are level gauging measurements by use of gamma radiation, i.e. for level detection as well as for level gauging over ranges of up to several meters. For our level gauge measuring system LB440 we developed a clearly arranged PC software, which allows starting, measuring and service of the level gauge. Over the RS232-interface the industrial computer can be connected with a Laptop or PC. The software is a supplemental or even a substitute for the operation over the frontpanel. The measuring system can be completely controlled by the Unibert PC-Software, realised by LabVIEW 5.1.1, which offers an interactive graphical user interface. The same functionality as in the ''embedded - software'' is available, completed with some additional functions. (orig.) [de

Implementing Software Defined Radio

CERN Document Server

Grayver, Eugene

2013-01-01

Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial Hardware platforms – FPGAs, GPPs, specialized and hybrid devices Standardization efforts to ens...

Achieving High Performance With TCP Over 40 GbE on NUMA Architectures for CMS Data Acquisition

Energy Technology Data Exchange (ETDEWEB)

Bawej, Tomasz; et al.

2014-01-01

TCP and the socket abstraction have barely changed over the last two decades, but at the network layer there has been a giant leap from a few megabits to 100 gigabits in bandwidth. At the same time, CPU architectures have evolved into the multicore era and applications are expected to make full use of all available resources. Applications in the data acquisition domain based on the standard socket library running in a Non-Uniform Memory Access (NUMA) architecture are unable to reach full efficiency and scalability without the software being adequately aware about the IRQ (Interrupt Request), CPU and memory affinities. During the first long shutdown of LHC, the CMS DAQ system is going to be upgraded for operation from 2015 onwards and a new software component has been designed and developed in the CMS online framework for transferring data with sockets. This software attempts to wrap the low-level socket library to ease higher-level programming with an API based on an asynchronous event driven model similar to the DAT uDAPL API. It is an event-based application with NUMA optimizations, that allows for a high throughput of data across a large distributed system. This paper describes the architecture, the technologies involved and the performance measurements of the software in the context of the CMS distributed event building.

AERCam Autonomy: Intelligent Software Architecture for Robotic Free Flying Nanosatellite Inspection Vehicles

Science.gov (United States)

Fredrickson, Steven E.; Duran, Steve G.; Braun, Angela N.; Straube, Timothy M.; Mitchell, Jennifer D.

2006-01-01

with minimal impact on IVA operators and ground controllers, the Mini AERCam system architecture incorporates intelligent systems attributes that support various autonomous capabilities. 1) A robust command sequencer enables task-level command scripting. Command scripting is employed for operations such as automatic inspection scans over a region of interest, and operator-hands-off automated docking. 2) A system manager built on the same expert-system software as the command sequencer provides detection and smart-response capability for potential system-level anomalies, like loss of communications between the Free Flyer and control station. 3) An AERCam dynamics manager provides nominal and off-nominal management of guidance, navigation, and control (GN&C) functions. It is employed for safe trajectory monitoring, contingency maneuvering, and related roles. This paper will describe these architectural components of Mini AERCam autonomy, as well as the interaction of these elements with a human operator during supervised autonomous control.

Towards Implementation of a Generalized Architecture for High-Level Quantum Programming Language

Science.gov (United States)

Ameen, El-Mahdy M.; Ali, Hesham A.; Salem, Mofreh M.; Badawy, Mahmoud

2017-08-01

This paper investigates a novel architecture to the problem of quantum computer programming. A generalized architecture for a high-level quantum programming language has been proposed. Therefore, the programming evolution from the complicated quantum-based programming to the high-level quantum independent programming will be achieved. The proposed architecture receives the high-level source code and, automatically transforms it into the equivalent quantum representation. This architecture involves two layers which are the programmer layer and the compilation layer. These layers have been implemented in the state of the art of three main stages; pre-classification, classification, and post-classification stages respectively. The basic building block of each stage has been divided into subsequent phases. Each phase has been implemented to perform the required transformations from one representation to another. A verification process was exposed using a case study to investigate the ability of the compiler to perform all transformation processes. Experimental results showed that the efficacy of the proposed compiler achieves a correspondence correlation coefficient about R ≈ 1 between outputs and the targets. Also, an obvious achievement has been utilized with respect to the consumed time in the optimization process compared to other techniques. In the online optimization process, the consumed time has increased exponentially against the amount of accuracy needed. However, in the proposed offline optimization process has increased gradually.

Pattern-Driven Architectural Partitioning. Balancing Functional and Non-functional Requirements

NARCIS (Netherlands)

Harrison, Neil; Avgeriou, Paris

2007-01-01

One of the vexing challenges of software architecture is the problem of satisfying the functional specifications of the system to be created while at the same time meeting its non-functional needs. In this work we focus on the early stages of the software architecture process, when initial

An AmI-Based Software Architecture Enabling Evolutionary Computation in Blended Commerce: The Shopping Plan Application

Directory of Open Access Journals (Sweden)

Giuseppe D’Aniello

2015-01-01

Full Text Available This work describes an approach to synergistically exploit ambient intelligence technologies, mobile devices, and evolutionary computation in order to support blended commerce or ubiquitous commerce scenarios. The work proposes a software architecture consisting of three main components: linked data for e-commerce, cloud-based services, and mobile apps. The three components implement a scenario where a shopping mall is presented as an intelligent environment in which customers use NFC capabilities of their smartphones in order to handle e-coupons produced, suggested, and consumed by the abovesaid environment. The main function of the intelligent environment is to help customers define shopping plans, which minimize the overall shopping cost by looking for best prices, discounts, and coupons. The paper proposes a genetic algorithm to find suboptimal solutions for the shopping plan problem in a highly dynamic context, where the final cost of a product for an individual customer is dependent on his previous purchases. In particular, the work provides details on the Shopping Plan software prototype and some experimentation results showing the overall performance of the genetic algorithm.

A discussion of higher order software concepts as they apply to functional requirements and specifications. [space shuttles and guidance

Science.gov (United States)

Hamilton, M.

1973-01-01

The entry guidance software functional requirements (requirements design phase), its architectural requirements (specifications design phase), and the entry guidance software verified code are discussed. It was found that the proper integration of designs at both the requirements and specifications levels are of high priority consideration.

Key Technologies of Phone Storage Forensics Based on ARM Architecture

Science.gov (United States)

Zhang, Jianghan; Che, Shengbing

2018-03-01

Smart phones are mainly running Android, IOS and Windows Phone three mobile platform operating systems. The android smart phone has the best market shares and its processor chips are almost ARM software architecture. The chips memory address mapping mechanism of ARM software architecture is different with x86 software architecture. To forensics to android mart phone, we need to understand three key technologies: memory data acquisition, the conversion mechanism from virtual address to the physical address, and find the system’s key data. This article presents a viable solution which does not rely on the operating system API for a complete solution to these three issues.

Artificial cognition architectures

CERN Document Server

Crowder, James A; Friess, Shelli A

2013-01-01

The goal of this book is to establish the foundation, principles, theory, and concepts that are the backbone of real, autonomous Artificial Intelligence. Presented here are some basic human intelligence concepts framed for Artificial Intelligence systems. These include concepts like Metacognition and Metamemory, along with architectural constructs for Artificial Intelligence versions of human brain functions like the prefrontal cortex. Also presented are possible hardware and software architectures that lend themselves to learning, reasoning, and self-evolution

Architectural Design of a LMS with LTSA-Conformance

Science.gov (United States)

Sengupta, Souvik; Dasgupta, Ranjan

2017-01-01

This paper illustrates an approach for architectural design of a Learning Management System (LMS), which is verifiable against the Learning Technology System Architecture (LTSA) conformance rules. We introduce a new method for software architectural design that extends the Unified Modeling Language (UML) component diagram with the formal…

Design of the commissioning software for the AGS to RHIC transfer line

International Nuclear Information System (INIS)

Trahern, C.G.; Saltmarsh, C.; Satogata, T.; Kewisch, J.; Sathe, S.; D'ottavio, T.; Tepikian, S.; Shea, D.

1995-01-01

RHIC accelerator physicists and engineers have collaboratively specified the control system software for the commissioning of the AGS to RHIC transfer line (ATR) to occur in the fall of 1995. This paper summarizes the design and progress to date. The authors discuss the basic physics/engineering device model that they use to understand process and data flows, and describe the architecture and tools they will use to build the application level software

Integrated software system for low level waste management

International Nuclear Information System (INIS)

Worku, G.

1995-01-01

In the continually changing and uncertain world of low level waste management, many generators in the US are faced with the prospect of having to store their waste on site for the indefinite future. This consequently increases the set of tasks performed by the generators in the areas of packaging, characterizing, classifying, screening (if a set of acceptance criteria applies), and managing the inventory for the duration of onsite storage. When disposal sites become available, it is expected that the work will require re-evaluating the waste packages, including possible re-processing, re-packaging, or re-classifying in preparation for shipment for disposal under the regulatory requirements of the time. In this day and age, when there is wide use of computers and computer literacy is at high levels, an important waste management tool would be an integrated software system that aids waste management personnel in conducting these tasks quickly and accurately. It has become evident that such an integrated radwaste management software system offers great benefits to radwaste generators both in the US and other countries. This paper discusses one such approach to integrated radwaste management utilizing some globally accepted radiological assessment software applications

Architectural Prototyping in Industrial Practice

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2008-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

Understanding the causes of architecture changes using OSS mailing lists

NARCIS (Netherlands)

Ding, Wei; Liang, Peng; Tang, Anthony; Van Vliet, Hans

2015-01-01

The causes of architecture changes can tell about why architecture changes, and this knowledge can be captured to prevent architecture knowledge vaporization and architecture degeneration. But the causes are not always known, especially in open source software (OSS) development. This makes it very

Software tools for microprocessor based systems

International Nuclear Information System (INIS)

Halatsis, C.

1981-01-01

After a short review of the hardware and/or software tools for the development of single-chip, fixed instruction set microprocessor-based sytems we focus on the software tools for designing systems based on microprogrammed bit-sliced microprocessors. Emphasis is placed on meta-microassemblers and simulation facilties at the register-transfer-level and architecture level. We review available meta-microassemblers giving their most important features, advantages and disadvantages. We also make extentions to higher-level microprogramming languages and associated systems specifically developed for bit-slices. In the area of simulation facilities we first discuss the simulation objectives and the criteria for chosing the right simulation language. We consertrate to simulation facilities already used in bit-slices projects and discuss the gained experience. We conclude by describing the way the Signetics meta-microassembler and the ISPS simulation tool have been employed in the design of a fast microprogrammed machine, called MICE, made out of ECL bit-slices. (orig.)

Architectural Design Support for Composition & Superimposition

NARCIS (Netherlands)

Gurp, Jilles van; Smedinga, Rein; Bosch, Jan

2002-01-01

The ever growing size and complexity of software systems is making it increasingly harder to build systems that both meet current and future requirements. During architecture design, a lot of important design decisions are taken. In this paper, we present an architecture design notation based on

A Microkernel Architecture for Constraint Programming

OpenAIRE

Michel, Laurent; Van Hentenryck, Pascal

2014-01-01

This paper presents a microkernel architecture for constraint programming organized around a number of small number of core functionalities and minimal interfaces. The architecture contrasts with the monolithic nature of many implementations. Experimental results indicate that the software engineering benefits are not incompatible with runtime efficiency.

Experience with Intel's many integrated core architecture in ATLAS software

International Nuclear Information System (INIS)

Fleischmann, S; Neumann, M; Kama, S; Lavrijsen, W; Vitillo, R

2014-01-01

Intel recently released the first commercial boards of its Many Integrated Core (MIC) Architecture. MIC is Intel's solution for the domain of throughput computing, currently dominated by general purpose programming on graphics processors (GPGPU). MIC allows the use of the more familiar x86 programming model and supports standard technologies such as OpenMP, MPI, and Intel's Threading Building Blocks (TBB). This should make it possible to develop for both throughput and latency devices using a single code base. In ATLAS Software, track reconstruction has been shown to be a good candidate for throughput computing on GPGPU devices. In addition, the newly proposed offline parallel event-processing framework, GaudiHive, uses TBB for task scheduling. The MIC is thus, in principle, a good fit for this domain. In this paper, we report our experiences of porting to and optimizing ATLAS tracking algorithms for the MIC, comparing the programmability and relative cost/performance of the MIC against those of current GPGPUs and latency-optimized CPUs.

A Cloverleaf of Software Engineering

DEFF Research Database (Denmark)

Bjørner, Dines

2005-01-01

, however "lite". Third, despite 35 years of formal methods, the SE industry, maturity-wise still lags far behind that of other engineering disciplines. So we examine why. Finally, in several areas, in health care, in architecture, and others, we see that major undertakings are primarily spearheaded...... by senior academic staff. Professors of medicine daily perform specialized surgery and treatments at hospitals. Professors of architecture design new, daring buildings for industry, and professors of civil engineering head the engineering structural design of new, daring bridges. So we speculate what......We shall touch upon four issues of software engineering (SE): domain engineering, formal techniques, SE sociology, and academic software architects. First, before software can be designed one must understand its requirements; but before requirements can be formulated one must understand the domain...

Open architecture CNC system

Energy Technology Data Exchange (ETDEWEB)

Tal, J. [Galil Motion Control Inc., Sunnyvale, CA (United States); Lopez, A.; Edwards, J.M. [Los Alamos National Lab., NM (United States)

1995-04-01

In this paper, an alternative solution to the traditional CNC machine tool controller has been introduced. Software and hardware modules have been described and their incorporation in a CNC control system has been outlined. This type of CNC machine tool controller demonstrates that technology is accessible and can be readily implemented into an open architecture machine tool controller. Benefit to the user is greater controller flexibility, while being economically achievable. PC based, motion as well as non-motion features will provide flexibility through a Windows environment. Up-grading this type of controller system through software revisions will keep the machine tool in a competitive state with minimal effort. Software and hardware modules are mass produced permitting competitive procurement and incorporation. Open architecture CNC systems provide diagnostics thus enhancing maintainability, and machine tool up-time. A major concern of traditional CNC systems has been operator training time. Training time can be greatly minimized by making use of Windows environment features.

Future Scenarios for Software-Defined Metro and Access Networks and Software-Defined Photonics

Directory of Open Access Journals (Sweden)

Tommaso Muciaccia

2017-01-01

Full Text Available In recent years, architectures, devices, and components in telecommunication networks have been challenged by evolutionary and revolutionary factors which are drastically changing the traffic features. Most of these changes imply the need for major re-configurability and programmability not only in data-centers and core networks, but also in the metro-access segment. In a wide variety of contexts, this necessity has been addressed by the proposed introduction of the innovative paradigm of software-defined networks (SDNs. Several solutions inspired by the SDN model have been recently proposed also for metro and access networks, where the adoption of a new generation of software-defined reconfigurable integrated photonic devices is highly desirable. In this paper, we review the possible future application scenarios for software-defined metro and access networks and software-defined photonics (SDP, on the base of analytics, statistics, and surveys. This work describes the reasons underpinning the presented radical change of paradigm and summarizes the most significant solutions proposed in literature, with a specific emphasis to physical-layer reconfigurable networks and a focus on both architectures and devices.

Autodesk Revit Architecture 2014 fundamentals metric

CERN Document Server

ASCENT center for technical knowledge

2014-01-01

The Autodesk® Revit® Architecture software is a powerful Building Information Modeling (BIM) program that works the way Architects think. From Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model. Changes made in one view update across all views and on the printable sheets. This training guide is designed to teach you the Autodesk Revit functionality as you would work with it in the design process. You begin by learning about the user interface and the Autodesk Revit commands for design development followed by those available for construction documentation. Since building projects themselves tend to be extremely complex, the Autodesk Revit Architecture software is also complex. The objective of the Autodesk Revit Architecture 2014 Fundamentals training guide is to enable students to create full 3D architectural project models and set them up in working drawings. This training guide focuses on basic tools that the ...

TS-05: 150 lines of java with high architectural complexity

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

2005-01-01

In the short time span available in a software architecture course, it is difficult to find a software system that is both interesting from an architectural perspective and so small that it does not overwhelm the students.We present TS-05 which is a bare 150 line Java "toy-system" that never...

In-Depth Modeling of the UNIX Operating System for Architectural Cyber Security Analysis

OpenAIRE

Vernotte, Alexandre; Johnson, Pontus; Ekstedt, Mathias; Lagerström, Robert

2017-01-01

ICT systems have become an integral part of business and life. At the same time, these systems have become extremely complex. In such systems exist numerous vulnerabilities waiting to be exploited by potential threat actors. pwnPr3d is a novel modelling approach that performs automated architectural analysis with the objective of measuring the cyber security of the modeled architecture. Its integrated modelling language allows users to model software and hardware components with great level o...

Two-dimensional systolic-array architecture for pixel-level vision tasks

Science.gov (United States)

Vijverberg, Julien A.; de With, Peter H. N.

2010-05-01

This paper presents ongoing work on the design of a two-dimensional (2D) systolic array for image processing. This component is designed to operate on a multi-processor system-on-chip. In contrast with other 2D systolic-array architectures and many other hardware accelerators, we investigate the applicability of executing multiple tasks in a time-interleaved fashion on the Systolic Array (SA). This leads to a lower external memory bandwidth and better load balancing of the tasks on the different processing tiles. To enable the interleaving of tasks, we add a shadow-state register for fast task switching. To reduce the number of accesses to the external memory, we propose to share the communication assist between consecutive tasks. A preliminary, non-functional version of the SA has been synthesized for an XV4S25 FPGA device and yields a maximum clock frequency of 150 MHz requiring 1,447 slices and 5 memory blocks. Mapping tasks from video content-analysis applications from literature on the SA yields reductions in the execution time of 1-2 orders of magnitude compared to the software implementation. We conclude that the choice for an SA architecture is useful, but a scaled version of the SA featuring less logic with fewer processing and pipeline stages yielding a lower clock frequency, would be sufficient for a video analysis system-on-chip.

Achieving Better Buying Power for Mobile Open Architecture Software Systems Through Diverse Acquisition Scenarios

Science.gov (United States)

2016-04-30

largest acquirers of commodity and bespoke (custom) software systems. The Defense community further extends its reach and influence on a global basis...information system applications that support modern military operations at a regional, national, or global level. These applications may be focused to...alternatives for costing or charging for software that include franchising ; enterprise licensing; metered usage; advertising supported; subscription

Comparison of Three Smart Camera Architectures for Real-Time Machine Vision System

Directory of Open Access Journals (Sweden)

Abdul Waheed Malik

2013-12-01

Full Text Available This paper presents a machine vision system for real-time computation of distance and angle of a camera from a set of reference points located on a target board. Three different smart camera architectures were explored to compare performance parameters such as power consumption, frame speed and latency. Architecture 1 consists of hardware machine vision modules modeled at Register Transfer (RT level and a soft-core processor on a single FPGA chip. Architecture 2 is commercially available software based smart camera, Matrox Iris GT. Architecture 3 is a two-chip solution composed of hardware machine vision modules on FPGA and an external microcontroller. Results from a performance comparison show that Architecture 2 has higher latency and consumes much more power than Architecture 1 and 3. However, Architecture 2 benefits from an easy programming model. Smart camera system with FPGA and external microcontroller has lower latency and consumes less power as compared to single FPGA chip having hardware modules and soft-core processor.

Software for virtual accelerator designing

International Nuclear Information System (INIS)

Kulabukhova, N.; Ivanov, A.; Korkhov, V.; Lazarev, A.

2012-01-01

The article discusses appropriate technologies for software implementation of the Virtual Accelerator. The Virtual Accelerator is considered as a set of services and tools enabling transparent execution of computational software for modeling beam dynamics in accelerators on distributed computing resources. Distributed storage and information processing facilities utilized by the Virtual Accelerator make use of the Service-Oriented Architecture (SOA) according to a cloud computing paradigm. Control system tool-kits (such as EPICS, TANGO), computing modules (including high-performance computing), realization of the GUI with existing frameworks and visualization of the data are discussed in the paper. The presented research consists of software analysis for realization of interaction between all levels of the Virtual Accelerator and some samples of middle-ware implementation. A set of the servers and clusters at St.-Petersburg State University form the infrastructure of the computing environment for Virtual Accelerator design. Usage of component-oriented technology for realization of Virtual Accelerator levels interaction is proposed. The article concludes with an overview and substantiation of a choice of technologies that will be used for design and implementation of the Virtual Accelerator. (authors)

Incorporating Level-2 PSA Feature of CONPAS into AIMS-PSA Software

International Nuclear Information System (INIS)

Han, Sang Hoon; Lim, Hogon; Ahn, Kwang Il

2014-01-01

CONPAS (CONtainment Performance Analysis System) utilizes a methodology to treat containment phenomena in detail like APET but in simple way. In mid 2000's, KAERI has developed very fast cut set generator FTREX and PC's OS (Operating system) has changed into Windows 95. Thus, KAERI has developed new Level-1 PSA software, called AIMS-PSA (Advanced Information Management System for PSA) to replace KIRAP. Recently, KAERI has been developing an integrated PSA platform, called OCEANS (On-line Consolidator and Evaluator of All mode risk for Nuclear System), for the risk assessment of all power modes and all hazards. CONPAS for Level-2 PSA was developed in 1990's using the Visual Basic 6.0 compiler which is not supported any more. It needs to be updated for the integrated PSA software framework. This paper describes a study to incorporate the features of CONPAS into AIMS-PSA. The basic idea is to follow the approach of CONPAS, but in the integrated way. Various approaches for Level-2 PSA have been used since WASH-1400. APET approach of NUREG-1150 study would be most comprehensive and complex methodology for containment event tree analysis. CONPAS is the Level-2 PSA software to utilize an approach to treat containment phenomena in detail like APET but in simple way. But, new Level-2 PSA software is required to develop more integrated PSA framework. A modified approach of CONPAS is developed and incorporated in AIMS-PSA software that can handle Level-1 and Level-2 PSA in the integrated way (from the viewpoint of event tree and fault tree). AIMS-PSA combines whole Level-2 PSA model to produce a One Top fault tree and to generate cut sets in the same way as Level-1 PSA. Quantification results of Level-2 PSA such as frequency for each STC can be calculated from the minimal cut sets

RT-Syn: A real-time software system generator

Science.gov (United States)

Setliff, Dorothy E.

1992-01-01

This paper presents research into providing highly reusable and maintainable components by using automatic software synthesis techniques. This proposal uses domain knowledge combined with automatic software synthesis techniques to engineer large-scale mission-critical real-time software. The hypothesis centers on a software synthesis architecture that specifically incorporates application-specific (in this case real-time) knowledge. This architecture synthesizes complex system software to meet a behavioral specification and external interaction design constraints. Some examples of these external constraints are communication protocols, precisions, timing, and space limitations. The incorporation of application-specific knowledge facilitates the generation of mathematical software metrics which are used to narrow the design space, thereby making software synthesis tractable. Success has the potential to dramatically reduce mission-critical system life-cycle costs not only by reducing development time, but more importantly facilitating maintenance, modifications, and extensions of complex mission-critical software systems, which are currently dominating life cycle costs.

Challenges in software ecosystems research

NARCIS (Netherlands)

Serebrenik, A.; Mens, T.; Crnkovic, I.

2015-01-01

The paper is a meta-analysis of the research field of software ecosystems, by method of surveying 26 authors in the field. It presents a relevant list of literature and six themes in which challenges for software ecosystems can be grouped: Architecture and Design, Governance, Dynamics and Evolution,

A scalable single-chip multi-processor architecture with on-chip RTOS kernel

NARCIS (Netherlands)

Theelen, B.D.; Verschueren, A.C.; Reyes Suarez, V.V.; Stevens, M.P.J.; Nunez, A.

2003-01-01

Now that system-on-chip technology is emerging, single-chip multi-processors are becoming feasible. A key problem of designing such systems is the complexity of their on-chip interconnects and memory architecture. It is furthermore unclear at what level software should be integrated. An example of a

The impact of optimize solar radiation received on the levels and energy disposal of levels on architectural design result by using computer simulation

Energy Technology Data Exchange (ETDEWEB)

Rezaei, Davood; Farajzadeh Khosroshahi, Samaneh; Sadegh Falahat, Mohammad [Zanjan University (Iran, Islamic Republic of)], email: d_rezaei@znu.ac.ir, email: ronas_66@yahoo.com, email: Safalahat@yahoo.com

2011-07-01

In order to minimize the energy consumption of a building it is important to achieve optimum solar energy. The aim of this paper is to introduce the use of computer modeling in the early stages of design to optimize solar radiation received and energy disposal in an architectural design. Computer modeling was performed on 2 different projects located in Los Angeles, USA, using ECOTECT software. Changes were made to the designs following analysis of the modeling results and a subsequent analysis was carried out on the optimized designs. Results showed that the computer simulation allows the designer to set the analysis criteria and improve the energy performance of a building before it is constructed; moreover, it can be used for a wide range of optimization levels. This study pointed out that computer simulation should be performed in the design stage to optimize a building's energy performance.

First International Workshop on Variability in Software Architecture (VARSA 2011)

NARCIS (Netherlands)

Galster, Matthias; Avgeriou, Paris; Weyns, Danny; Mannisto, Tomi

2011-01-01

Variability is the ability of a software artifact to be changed for a specific context. Mechanisms to accommodate variability include software product lines, configuration wizards and tools in commercial software, configuration interfaces of software components, or the dynamic runtime composition of

The Software Management Environment (SME)

Science.gov (United States)

Valett, Jon D.; Decker, William; Buell, John

1988-01-01

The Software Management Environment (SME) is a research effort designed to utilize the past experiences and results of the Software Engineering Laboratory (SEL) and to incorporate this knowledge into a tool for managing projects. SME provides the software development manager with the ability to observe, compare, predict, analyze, and control key software development parameters such as effort, reliability, and resource utilization. The major components of the SME, the architecture of the system, and examples of the functionality of the tool are discussed.

Customizable software architectures in the accelerator control system environment

CERN Document Server

Mejuev, I; Kadokura, E

2001-01-01

Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user customization has been extensively researched in applied computer science from HCI and software engineering perspectives. Customization allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user customization in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. We introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of a distributed monitoring application for the 12 GeV KEK Proton Synchrotron as an example. T...

ELISA, a demonstrator environment for information systems architecture design

Science.gov (United States)

Panem, Chantal

1994-01-01

This paper describes an approach of reusability of software engineering technology in the area of ground space system design. System engineers have lots of needs similar to software developers: sharing of a common data base, capitalization of knowledge, definition of a common design process, communication between different technical domains. Moreover system designers need to simulate dynamically their system as early as possible. Software development environments, methods and tools now become operational and widely used. Their architecture is based on a unique object base, a set of common management services and they host a family of tools for each life cycle activity. In late '92, CNES decided to develop a demonstrative software environment supporting some system activities. The design of ground space data processing systems was chosen as the application domain. ELISA (Integrated Software Environment for Architectures Specification) was specified as a 'demonstrator', i.e. a sufficient basis for demonstrations, evaluation and future operational enhancements. A process with three phases was implemented: system requirements definition, design of system architectures models, and selection of physical architectures. Each phase is composed of several activities that can be performed in parallel, with the provision of Commercial Off the Shelves Tools. ELISA has been delivered to CNES in January 94, currently used for demonstrations and evaluations on real projects (e.g. SPOT4 Satellite Control Center). It is on the way of new evolutions.

Tank waste remediation system architecture tree

International Nuclear Information System (INIS)

PECK, L.G.

1999-01-01

The TWRS Architecture Tree presented in this document is a hierarchical breakdown to support the TWRS systems engineering analysis of the TWRS physical system, including facilities, hardware and software. The purpose for this systems engineering architecture tree is to describe and communicate the system's selected and existing architecture, to provide a common structure to improve the integration of work and resulting products, and to provide a framework as a basis for TWRS Specification Tree development

Component-Based Software Engineering and Runtime Type Definition

OpenAIRE

A. R. Shakurov

2011-01-01

The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

Dynamic Analysis Techniques for the Reconstruction of Architectural Views

NARCIS (Netherlands)

Cornelissen, B.

2007-01-01

Gaining an understanding of software systems is an important discipline in many software engineering contexts. It is essential that software engineers are assisted as much as possible during this task, e.g., by using tools and techniques that provide architectural views on the software at hand. This

Tailorable software architectures in the accelerator control system environment

International Nuclear Information System (INIS)

Mejuev, Igor; Kumagai, Akira; Kadokura, Eiichi

2001-01-01

Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user tailorability has been extensively researched in applied computer science from HCl and software engineering perspectives. Tailorability allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user tailorability in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. In this work we introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of distributed monitoring application for 12 GeV KEK Proton Synchrotron as an example. The software prototypes used in this work are based on a generic tailoring platform (VEDICI), which allows decoupling of tailoring interfaces and runtime components. While representing a reusable application-independent framework, VEDICI can be potentially applied for tailoring of arbitrary compositional Web-based applications

ATLAS software stack on ARM64

CERN Document Server

Smith, Joshua Wyatt; The ATLAS collaboration

2016-01-01

The ATLAS experiment explores new hardware and software platforms that, in the future, may be more suited to its data intensive workloads. One such alternative hardware platform is the ARM architecture, which is designed to be extremely power efficient and is found in most smartphones and tablets. CERN openlab recently installed a small cluster of ARM 64-bit evaluation prototype servers. Each server is based on a single-socket ARM 64-bit system on a chip, with 32 Cortex-A57 cores. In total, each server has 128 GB RAM connected with four fast memory channels. This paper reports on the port of the ATLAS software stack onto these new prototype ARM64 servers. This included building the "external" packages that the ATLAS software relies on. Patches were needed to introduce this new architecture into the build as well as patches that correct for platform specific code that caused failures on non-x86 architectures. These patches were applied such that porting to further platforms will need no or only very little adj...

Managing Risk Areas in Software Development Offshoring: A CMMI Level 5 Case

DEFF Research Database (Denmark)

Persson, John Stouby; Schlichter, Bjarne Rerup

2015-01-01

Software companies are increasingly offshoring development to countries with high expertise at lower cost. Offshoring involves particular risk areas that if ignored increase the likelihood of failure. However, the offshoring client’s maturity level may influence the management of these risk areas....... Against this backdrop, we present an interpretive case study of how managers perceive and mitigate the risk areas in software development offshoring with a mature CMMI level 5 (Capability Maturity Model, Integrated) software company as the client. We find that managers perceive and mitigate most...

DART: A Functional-Level Reconfigurable Architecture for High Energy Efficiency

Directory of Open Access Journals (Sweden)

David Raphaël

2008-01-01

Full Text Available Abstract Flexibility becomes a major concern for the development of multimedia and mobile communication systems, as well as classical high-performance and low-energy consumption constraints. The use of general-purpose processors solves flexibility problems but fails to cope with the increasing demand for energy efficiency. This paper presents the DART architecture based on the functional-level reconfiguration paradigm which allows a significant improvement in energy efficiency. DART is built around a hierarchical interconnection network allowing high flexibility while keeping the power overhead low. To enable specific optimizations, DART supports two modes of reconfiguration. The compilation framework is built using compilation and high-level synthesis techniques. A 3G mobile communication application has been implemented as a proof of concept. The energy distribution within the architecture and the physical implementation are also discussed. Finally, the VLSI design of a 0.13  m CMOS SoC implementing a specialized DART cluster is presented.

DART: A Functional-Level Reconfigurable Architecture for High Energy Efficiency

Directory of Open Access Journals (Sweden)

Sébastien Pillement

2007-12-01

Full Text Available Flexibility becomes a major concern for the development of multimedia and mobile communication systems, as well as classical high-performance and low-energy consumption constraints. The use of general-purpose processors solves flexibility problems but fails to cope with the increasing demand for energy efficiency. This paper presents the DART architecture based on the functional-level reconfiguration paradigm which allows a significant improvement in energy efficiency. DART is built around a hierarchical interconnection network allowing high flexibility while keeping the power overhead low. To enable specific optimizations, DART supports two modes of reconfiguration. The compilation framework is built using compilation and high-level synthesis techniques. A 3G mobile communication application has been implemented as a proof of concept. The energy distribution within the architecture and the physical implementation are also discussed. Finally, the VLSI design of a 0.13 μm CMOS SoC implementing a specialized DART cluster is presented.

Architecture of a Framework for Providing Information Services for Public Transport

Directory of Open Access Journals (Sweden)

Gabino Padrón

2012-04-01

Full Text Available This paper presents OnRoute, a framework for developing and running ubiquitous software that provides information services to passengers of public transportation, including payment systems and on-route guidance services. To achieve a high level of interoperability, accessibility and context awareness, OnRoute uses the ubiquitous computing paradigm. To guarantee the quality of the software produced, the reliable software principles used in critical contexts, such as automotive systems, are also considered by the framework. The main components of its architecture (run-time, system services, software components and development discipline and how they are deployed in the transportation network (stations and vehicles are described in this paper. Finally, to illustrate the use of OnRoute, the development of a guidance service for travellers is explained.

Neural Architectures for Control

Science.gov (United States)

Peterson, James K.

1991-01-01

The cerebellar model articulated controller (CMAC) neural architectures are shown to be viable for the purposes of real-time learning and control. Software tools for the exploration of CMAC performance are developed for three hardware platforms, the MacIntosh, the IBM PC, and the SUN workstation. All algorithm development was done using the C programming language. These software tools were then used to implement an adaptive critic neuro-control design that learns in real-time how to back up a trailer truck. The truck backer-upper experiment is a standard performance measure in the neural network literature, but previously the training of the controllers was done off-line. With the CMAC neural architectures, it was possible to train the neuro-controllers on-line in real-time on a MS-DOS PC 386. CMAC neural architectures are also used in conjunction with a hierarchical planning approach to find collision-free paths over 2-D analog valued obstacle fields. The method constructs a coarse resolution version of the original problem and then finds the corresponding coarse optimal path using multipass dynamic programming. CMAC artificial neural architectures are used to estimate the analog transition costs that dynamic programming requires. The CMAC architectures are trained in real-time for each obstacle field presented. The coarse optimal path is then used as a baseline for the construction of a fine scale optimal path through the original obstacle array. These results are a very good indication of the potential power of the neural architectures in control design. In order to reach as wide an audience as possible, we have run a seminar on neuro-control that has met once per week since 20 May 1991. This seminar has thoroughly discussed the CMAC architecture, relevant portions of classical control, back propagation through time, and adaptive critic designs.

A Comparison and Evaluation of Real-Time Software Systems Modeling Languages

Science.gov (United States)

Evensen, Kenneth D.; Weiss, Kathryn Anne

2010-01-01

A model-driven approach to real-time software systems development enables the conceptualization of software, fostering a more thorough understanding of its often complex architecture and behavior while promoting the documentation and analysis of concerns common to real-time embedded systems such as scheduling, resource allocation, and performance. Several modeling languages have been developed to assist in the model-driven software engineering effort for real-time systems, and these languages are beginning to gain traction with practitioners throughout the aerospace industry. This paper presents a survey of several real-time software system modeling languages, namely the Architectural Analysis and Design Language (AADL), the Unified Modeling Language (UML), Systems Modeling Language (SysML), the Modeling and Analysis of Real-Time Embedded Systems (MARTE) UML profile, and the AADL for UML profile. Each language has its advantages and disadvantages, and in order to adequately describe a real-time software system's architecture, a complementary use of multiple languages is almost certainly necessary. This paper aims to explore these languages in the context of understanding the value each brings to the model-driven software engineering effort and to determine if it is feasible and practical to combine aspects of the various modeling languages to achieve more complete coverage in architectural descriptions. To this end, each language is evaluated with respect to a set of criteria such as scope, formalisms, and architectural coverage. An example is used to help illustrate the capabilities of the various languages.

Effective software design and development for the new graph architecture HPC machines.

Energy Technology Data Exchange (ETDEWEB)

Dechev, Damian

2012-03-01

Software applications need to change and adapt as modern architectures evolve. Nowadays advancement in chip design translates to increased parallelism. Exploiting such parallelism is a major challenge in modern software engineering. Multicore processors are about to introduce a significant change in the way we design and use fundamental data structures. In this work we describe the design and programming principles of a software library of highly concurrent scalable and nonblocking data containers. In this project we have created algorithms and data structures for handling fundamental computations in massively multithreaded contexts, and we have incorporated these into a usable library with familiar look and feel. In this work we demonstrate the first design and implementation of a wait-free hash table. Our multiprocessor data structure design allows a large number of threads to concurrently insert, remove, and retrieve information. Non-blocking designs alleviate the problems traditionally associated with the use of mutual exclusion, such as bottlenecks and thread-safety. Lock-freedom provides the ability to share data without some of the drawbacks associated with locks, however, these designs remain susceptible to starvation. Furthermore, wait-freedom provides all of the benefits of lock-free synchronization with the added assurance that every thread makes progress in a finite number of steps. This implies deadlock-freedom, livelock-freedom, starvation-freedom, freedom from priority inversion, and thread-safety. The challenges of providing the desirable progress and correctness guarantees of wait-free objects makes their design and implementation difficult. There are few wait-free data structures described in the literature. Using only standard atomic operations provided by the hardware, our design is portable; therefore, it is applicable to a variety of data-intensive applications including the domains of embedded systems and supercomputers.Our experimental

Process-based software project management

CERN Document Server

Goodman, F Alan

2006-01-01

Not connecting software project management (SPM) to actual, real-world development processes can lead to a complete divorcing of SPM to software engineering that can undermine any successful software project. By explaining how a layered process architectural model improves operational efficiency, Process-Based Software Project Management outlines a new method that is more effective than the traditional method when dealing with SPM. With a clear and easy-to-read approach, the book discusses the benefits of an integrated project management-process management connection. The described tight coup

Automatic Functionality Assignment to AUTOSAR Multicore Distributed Architectures

DEFF Research Database (Denmark)

Maticu, Florin; Pop, Paul; Axbrink, Christian

2016-01-01