WorldWideScience

Sample records for lessons learned applicable

  1. Functionality for learning networks: lessons learned from social web applications

    NARCIS (Netherlands)

    Berlanga, Adriana; Sloep, Peter; Brouns, Francis; Van Rosmalen, Peter; Bitter-Rijpkema, Marlies; Koper, Rob

    2007-01-01

    Berlanga, A. J., Sloep, P., Brouns, F., Van Rosmalen, P., Bitter-Rijpkema, M., & Koper, R. (2007). Functionality for learning networks: lessons learned from social web applications. Proceedings of the ePortfolio 2007 Conference. October, 18-19, 2007, Maastricht, The Netherlands. [See also

  2. Stand-alone photovoltaic applications. Lessons learned

    International Nuclear Information System (INIS)

    Loois, G.; Van Hemert, B.

    1999-02-01

    The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative R and D agreements established within the IEA. The objective of Task III is to promote and facilitate the exchange of information and experiences in the field of PV Systems in Stand-alone and Island Applications (SAPV). The book focuses on the practical experiences gained, and does not aim to provide a complete manual on SAPV. When Task III started its activities in 1993, a collection of 50 'State of the art' projects was published in the book 'Examples of Stand-Alone Photovoltaic Systems'. This publication marked the base line for the work of the task. Now, in 1998, the showcases from each country demonstrate the lessons learned in five years of cooperation. The book consists of two parts. The first part contains eight chapters dealing with a specific aspect of stand-alone PV. The second part introduces 14 national showcase projects in a systematic presentation. Each chapter and showcase can be read independently from the rest of the book. Chapter 2, contributed by The Netherlands, analyses the market for stand-alone PV systems. It gives an overview of the 'traditional' application of stand-alone PV, which is the electrification of remote buildings and which has been addressed in depth in other publications. The focus is on the market niches of service applications that are also interesting for more densely populated areas, e.g. in industrialised countries. The United Kingdom illustrates the economic aspects in Chapter 3. Cost comparisons are made, but more important is the illustration of the non-financial considerations that make PV the preferred choice as a power source for many applications. Switzerland explores in Chapter 4 (financing aspects) different financing mechanisms, and financial policies used to overcome the initial cost barrier. Most of these approaches have been applied in developing countries rather than in the western world. Using various examples from all over the

  3. Lessons learned bulletin

    International Nuclear Information System (INIS)

    1994-05-01

    During the past four years, the Department of Energy -- Savannah River Operations Office and the Westinghouse Savannah River Company (WSRC) Environmental Restoration (ER) Program completed various activities ranging from waste site investigations to closure and post closure projects. Critiques for lessons learned regarding project activities are performed at the completion of each project milestone, and this critique interval allows for frequent recognition of lessons learned. In addition to project related lessons learned, ER also performs lessons learned critiques. T'he Savannah River Site (SRS) also obtains lessons learned information from general industry, commercial nuclear industry, naval nuclear programs, and other DOE sites within the complex. Procedures are approved to administer the lessons learned program, and a database is available to catalog applicable lessons learned regarding environmental remediation, restoration, and administrative activities. ER will continue to use this database as a source of information available to SRS personnel

  4. Job task analysis: lessons learned from application in course development

    International Nuclear Information System (INIS)

    Meredith, J.B.

    1985-01-01

    Those at Public Service Electric and Gas Company are committed to a systematic approach to training known as Instructional System Design. Our performance-based training emphasizes the ISD process to have trainees do or perform the task whenever and wherever it is possible for the jobs for which they are being trained. Included is a brief description of our process for conducting and validating job analyses. The major thrust of this paper is primarily on the lessons that we have learned in the design and development of training programs based upon job analysis results

  5. Lessons Learned

    Directory of Open Access Journals (Sweden)

    Amanda Phelan BNS, MSc, PhD

    2015-03-01

    Full Text Available The public health nurses’ scope of practice explicitly includes child protection within their role, which places them in a prime position to identify child protection concerns. This role compliments that of other professions and voluntary agenices who work with children. Public health nurses are in a privileged position as they form a relationship with the child’s parent(s/guardian(s and are able to see the child in its own environment, which many professionals cannot. Child protection in Ireland, while influenced by other countries, has progressed through a distinct pathway that streamlined protocols and procedures. However, despite the above serious failures have occurred in the Irish system, and inquiries over the past 20 years persistently present similar contributing factors, namely, the lack of standardized and comprehensive service responses. Moreover, poor practice is compounded by the lack of recognition of the various interactional processes taking place within and between the different agencies of child protection, leading to psychological barriers in communication. This article will explore the lessons learned for public health nurses practice in safeguarding children in the Republic of Ireland.

  6. Lesson Learning at JPL

    Science.gov (United States)

    Oberhettinger, David

    2011-01-01

    A lessons learned system is a hallmark of a mature engineering organization A formal lessons learned process can help assure that valuable lessons get written and published, that they are well-written, and that the essential information is "infused" into institutional practice. Requires high-level institutional commitment, and everyone's participation in gathering, disseminating, and using the lessons

  7. Lessons Learned

    International Nuclear Information System (INIS)

    Dougan, A.D.; Blair, S.

    2006-01-01

    LLNL turned in 5 Declaration Line Items (DLI's) in 2006. Of these, one was declared completed. We made some changes to streamline our process from 2005, used less money, time and fewer team members. This report is a description of what changes we made in 2006 and what we learned. Many of our core review team had changed from last year, including our Laboratory Director, the Facility safety and security representatives, our Division Leader, and the OPSEC Committee Chair. We were able to hand out an AP Manual to some of them, and briefed all newcomers to the AP process. We first went to the OPSEC Committee and explained what the Additional Protocol process would be for 2006 and solicited their help in locating declarable projects. We utilized the 'three questions' from the AP meeting last year. LLNL has no single place to locate all projects at the laboratory. We talked to Resource Managers and key Managers in the Energy and Environment Directorate and in the Nonproliferation Homeland and International Security Directorate to find applicable projects. We also talked to the Principal Investigators who had projects last year. We reviewed a list of CRADA's and LDRD projects given to us by the Laboratory Site Office. Talking to the PI's proved difficult because of vacation or travel schedules. We were never able to locate one PI in town. Fortunately, collateral information allowed us to screen out his project. We had no problems in downloading new versions of the DWA and DDA. It was helpful for both Steve Blair and Arden Dougan to have write privileges. During the time we were working on the project, we had to tag-team the work to allow for travel and vacation schedules. We had some difficulty locating an 'activities block' in the software. This was mentioned as something we needed to fix from our 2005 declaration. Evidently the Activities Block has been removed from the current version of the software. We also had trouble finding the DLI Detail Report, which we included

  8. Lessons learned from accidents investigations

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J

    1997-12-31

    Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  9. Lessons learned from accident investigations

    International Nuclear Information System (INIS)

    Zuniga-Bello, P.; Croft, J.R.; Glenn, J.

    1998-01-01

    Accidents in three main practices - medical applications, industrial radiography and industrial irradiators - are used to illustrate some common causes of accidents and the main lessons to be learned from them. A brief description of some of these accidents is given. Lessons learned from the accidents described are approached bearing in mind: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  10. Army, Presidential, and Corporate Strategic Transitions: The Importance of Transition Teams and the Application of Lessons Learned

    Science.gov (United States)

    2006-05-25

    accessed from http://www.american.edu/15pointplan/WhatIsABestPractice.html on 17 Feb 2006. Argenti , Paul A., Corporate Communication . 3rd ed. Boston...Army, Presidential, and Corporate Strategic Transitions: The Importance of Transition Teams and the Application of Lessons Learned A Monograph...SUBTITLE Army, Presidential, and Corporate Strategic Transitions: The Importance of Transition Teams and the Application of Lessons Learned 5c

  11. Summary of Planned Implementation for the HTGR Lessons Learned Applicable to the NGNP

    International Nuclear Information System (INIS)

    Mckirdy, Ian

    2011-01-01

    This document presents a reconciliation of the lessons learned during a 2010 comprehensive evaluation of pertinent lessons learned from past and present high temperature gas-cooled reactors that apply to the Next Generation Nuclear Plant Project along with current and planned activities. The data used are from the latest Idaho National Laboratory research and development plans, the conceptual design report from General Atomics, and the pebble bed reactor technology readiness study from AREVA. Only those lessons related to the structures, systems, and components of the Next Generation Nuclear Plant (NGNP), as documented in the recently updated lessons learned report are addressed. These reconciliations are ordered according to plant area, followed by the affected system, subsystem, or component; lesson learned; and finally an NGNP implementation statement. This report (1) provides cross references to the original lessons learned document, (2) describes the lesson learned, (3) provides the current NGNP implementation status with design data needs associated with the lesson learned, (4) identifies the research and development being performed related to the lesson learned, and (5) summarizes with a status of how the lesson learned has been addressed by the NGNP Project.

  12. Applications and Lessons Learned using Data from the Atmospheric Infrared Sounder

    Science.gov (United States)

    Ray, S. E.; Fetzer, E. J.; Olsen, E. T.; Lambrigtsen, B.; Pagano, T. S.; Teixeira, J.; Licata, S. J.; Hall, J. R.

    2016-12-01

    Applications and Lessons Learned using Data from the Atmospheric Infrared SounderSharon Ray, Jet Propulsion Laboratory, California Institute of Technology The Atmospheric Infrared Sounder (AIRS) on NASA's Aqua spacecraft has been returning daily global observations of Earth's atmospheric constituents and properties since 2002. With a 12-year data record and daily, global observations in near real-time, AIRS can play a role in applications that fall under many of the NASA Applied Sciences focus areas. AIRS' involvement in applications is two years in, so what have we learned and what are the pitfalls? AIRS has made gains in drought applications with products under consideration for inclusion in the U.S. Drought Monitor national map, as also with volcano rapid response with an internal alert system and automated products to help characterize plume extent. Efforts are underway with cold air aloft for aviation, influenza outbreak prediction, and vector borne disease. But challenges have occurred both in validation and in crossing the "valley of death" between products and decision makers. AIRS now has improved maps of standard products to be distributed in near real-time via NASA LANCE and by the Goddard DAAC as part of the Obama's administration Big Earth Data Initiative. In addition internal tools have been developed to support development and distribution of our application products. This talk will communicate the status of the AIRS applications effort along with lessons learned, and provide examples of new product imagery designed to best communicate AIRS data.

  13. Developing a Command and Control Application: Lessons Learned from FLEX

    National Research Council Canada - National Science Library

    Frantz, Albert G; Waller, Howard T; O'Neill, Patrick J; Clark, Thomas A; Marks, David L; Flo, Robert M; Griffith, David A

    1999-01-01

    ...) application, the Force Level EXecution (FLEX) software system. FLEX is the battle management software for monitoring the execution of Joint Air Operations in the Air Force Electronic Systems Center's Theater Battle Management Core Systems (TBMCS...

  14. NASA Applications and Lessons Learned in Reliability Engineering

    Science.gov (United States)

    Safie, Fayssal M.; Fuller, Raymond P.

    2011-01-01

    Since the Shuttle Challenger accident in 1986, communities across NASA have been developing and extensively using quantitative reliability and risk assessment methods in their decision making process. This paper discusses several reliability engineering applications that NASA has used over the year to support the design, development, and operation of critical space flight hardware. Specifically, the paper discusses several reliability engineering applications used by NASA in areas such as risk management, inspection policies, components upgrades, reliability growth, integrated failure analysis, and physics based probabilistic engineering analysis. In each of these areas, the paper provides a brief discussion of a case study to demonstrate the value added and the criticality of reliability engineering in supporting NASA project and program decisions to fly safely. Examples of these case studies discussed are reliability based life limit extension of Shuttle Space Main Engine (SSME) hardware, Reliability based inspection policies for Auxiliary Power Unit (APU) turbine disc, probabilistic structural engineering analysis for reliability prediction of the SSME alternate turbo-pump development, impact of ET foam reliability on the Space Shuttle System risk, and reliability based Space Shuttle upgrade for safety. Special attention is given in this paper to the physics based probabilistic engineering analysis applications and their critical role in evaluating the reliability of NASA development hardware including their potential use in a research and technology development environment.

  15. Carbon Monitoring System Applications Framework: Lessons Learned from Stakeholder Engagement Activities

    Science.gov (United States)

    Sepulveda Carlo, E.; Escobar, V. M.; Delgado Arias, S.; Forgotson, C.

    2017-12-01

    The NASA Carbon Monitoring System initiated by U.S. Congress in 2010 is developing products that characterize and quantify carbon sources and sinks in the United States and the global tropics. In 2013, an applications effort was selected to engage potential end users and gather feedback about their data needs. For the past four years the CMS applications efforts has expanded and implemented a number of strategies to connect carbon scientists to decision-makers, contributing to the societal benefits of CMS data products. The applications efforts use crowd sourcing to collects feedback from stakeholders on challenges and lessons learned in the use of CMS data products. Some of the most common data needs from engaged organizations include above and below-ground biomass and fluxes in forestlands and wetlands, and greenhouse gas (GHG) emissions across all land use/cover and land use changes. Stakeholder organizations' needs for CMS data products support national GHG inventories following the Paris Agreement, carbon markets, and sub-national natural resources management and policies. The lessons learned report presents stakeholder specific applications, challenges, and successes from using CMS data products. To date, the most common uses of CMS products include: conservation efforts, emissions inventory, forestry and land cover applications, and carbon offset projects. The most common challenges include: the need for familiar and consistent products over time, budget constraints, and concern with uncertainty of modeled results. Recurrent recommendations from stakeholder indicate that CMS should provide high resolution (30m) and frequent data products updates (annually). The applications efforts have also helped identified success stories from different CMS projects, including the development of the GHG emissions inventory from Providence, RI, the improvement of the U.S. GHG Inventory though the use of satellite data, and the use of high resolution canopy cover maps for

  16. Human Spaceflight Conjunction Assessment: Lessons Learned

    Science.gov (United States)

    Smith, Jason T.

    2011-01-01

    This viewgraph presentation reviews the process of a human space flight conjunction assessment and lessons learned from the more than twelve years of International Space Station (ISS) operations. Also, the application of these lessons learned to a recent ISS conjunction assessment with object 84180 on July 16, 2009 is also presented.

  17. Constellation Program Lessons Learned. Volume 2; Detailed Lessons Learned

    Science.gov (United States)

    Rhatigan, Jennifer; Neubek, Deborah J.; Thomas, L. Dale

    2011-01-01

    These lessons learned are part of a suite of hardware, software, test results, designs, knowledge base, and documentation that comprises the legacy of the Constellation Program. The context, summary information, and lessons learned are presented in a factual format, as known and described at the time. While our opinions might be discernable in the context, we have avoided all but factually sustainable statements. Statements should not be viewed as being either positive or negative; their value lies in what we did and what we learned that is worthy of passing on. The lessons include both "dos" and "don ts." In many cases, one person s "do" can be viewed as another person s "don t"; therefore, we have attempted to capture both perspectives when applicable and useful. While Volume I summarizes the views of those who managed the program, this Volume II encompasses the views at the working level, describing how the program challenges manifested in day-to-day activities. Here we see themes that were perhaps hinted at, but not completely addressed, in Volume I: unintended consequences of policies that worked well at higher levels but lacked proper implementation at the working level; long-term effects of the "generation gap" in human space flight development, the need to demonstrate early successes at the expense of thorough planning, and the consequences of problems and challenges not yet addressed because other problems and challenges were more immediate or manifest. Not all lessons learned have the benefit of being operationally vetted, since the program was cancelled shortly after Preliminary Design Review. We avoid making statements about operational consequences (with the exception of testing and test flights that did occur), but we do attempt to provide insight into how operational thinking influenced design and testing. The lessons have been formatted with a description, along with supporting information, a succinct statement of the lesson learned, and

  18. Lessons learned from Gen II NPP staffing approaches applicable to new reactors - 15003

    International Nuclear Information System (INIS)

    Goodnight, C.

    2015-01-01

    This paper discusses lessons learned from the operation of the Gen II fleet of existing nuclear power plants (NPPs), in terms of staffing, that can be applied to the final design, deployment, and operation of new reactor designs. The most significant of these lessons is the need to appropriately staff the facility, having the right number of people with the required skills and experience. This begs the question of how to identify those personnel requirements. For NPPs, there are five key factors that ultimately will determine the effectiveness and costs of operating nuclear power plants (NPPs): 1) The Nuclear Steam Supply System (NSSS) and the layout of the plant site; 2) The processes which the operating organization applies; 3) The organizational structure of the operating organization; 4) The organizational culture of the operating organization, and 5) The regulatory framework under which the licensee must operate. In summary, this paper identifies opportunities to minimize staffing and costs learned from Gen II NPPs that may be applicable for new nuclear plants. (author)

  19. Lessons learned from the development of health applications in a tertiary hospital.

    Science.gov (United States)

    Park, Joong-Yeol; Lee, Guna; Shin, Soo-Yong; Kim, Jeong Hun; Han, Hye-Won; Kwon, Tae-Wan; Kim, Woo Sung; Lee, Jae Ho

    2014-03-01

    Adoption of smart devices for hospital use has been increasing with the development of health applications (apps) for patient point-of-care and hospital management. To promote the use of health apps, we describe the lessons learned from developing 12 health apps in the largest tertiary hospital in Korea. We reviewed and analyzed 12 routinely used apps in three categories-Smart Clinic, Smart Patient, and Smart Hospital-based on target users and functions. The log data for each app were collected from the date of release up until December 2012. Medical personnel accessed a mobile electronic medical record app classified as Smart Clinic an average of 452 times per day. Smart Hospital apps are actively used to communicate with each other. Patients logged on to a mobile personal health record app categorized as Smart Patient an average of 222 times per day. As the mobile trend, the choice of supporting operating system (OS) is more difficult. By developing these apps, a monitoring system is needed for evaluation. We described the lessons learned regarding OS support, device choice, and developmental strategy. The OS can be chosen according to market share or hospital strategic plan. Smartphones were favored compared with tablets. Alliance with an information technology company can be the best way to develop apps. Health apps designed for smart devices can be used to improve healthcare. However, to develop health apps, hospitals must define their future goals and carefully consider all the aspects.

  20. Lessons learned from application of the Swedish regulations for decommissioning of nuclear facilities - The regulator's perspective

    International Nuclear Information System (INIS)

    Efraimsson, Henrik; Amft, Martin; Leisvik, Mathias

    2016-01-01

    The paper presents an overview of the Swedish regulations for decommissioning of nuclear facilities. It describes some of the experiences that the Swedish Radiation Safety Authority has gained from the application of these regulations. The focus of the present paper lies on administrative aspects of the care and maintenance operation and on the safety related documentation that has to be prepared before dismantling commences. Lessons learned during recent years will be considered when revising the regulations for decommissioning. Also these lessons learned will help to streamline the administration of the large NPP decommissioning projects that are anticipated to commence in Sweden in the near future. (authors)

  1. Applicability of health physics lessons learned from the Three Mile Island Unit 2 accident to the Fukushima Daiichi accident.

    Science.gov (United States)

    Bevelacqua, J J

    2012-02-01

    The TMI-2 and Fukushima Daiichi accidents appear to be dissimilar because they involve different reactor types. However, the health physics related lessons learned from TMI-2 are applicable, and can enhance the Fukushima Daiichi recovery effort. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. DSCOVR Contamination Lessons Learned

    Science.gov (United States)

    Graziani, Larissa

    2015-01-01

    The Triana observatory was built at NASA GSFC in the late 1990's, then placed into storage. After approximately ten years it was removed from storage and repurposed as the Deep Space Climate Observatory (DSCOVR). This presentation outlines the contamination control program lessons learned during the integration, test and launch of DSCOVR.

  3. Lessons learned from the design of chemical space networks and opportunities for new applications.

    Science.gov (United States)

    Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M; Bajorath, Jürgen

    2016-03-01

    The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer-Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

  4. Lessons learned from the design of chemical space networks and opportunities for new applications

    Science.gov (United States)

    Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M.; Bajorath, Jürgen

    2016-03-01

    The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer- Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

  5. Lessons learned in over 100 zebra mussel control applications at industrial facilities

    Energy Technology Data Exchange (ETDEWEB)

    McGough, C.M.; Gilland, P.H.; Muia, R.A. [Calgon Corp., Pittsburgh, PA (United States)

    1998-12-31

    Since their introduction into US waterways, Zebra Mussels (Dreissena polymorphae) have spread rapidly throughout the Great Lakes and Mississippi regions. These mussels have continued to colonize the intake pipes of industrial water supplies and water distribution systems throughout the affected areas. Their colonization has compromised plant safety and production efficiency, and steadily increased costs to water users. The design of each industrial plant water distribution system is unique. A comprehensive zebra mussel control strategy using the best available options must be considered in each specific situation. This paper discusses the successful use of one strategy (a quaternary ammonia-based molluscicide) in the battle against zebra mussels. The commercial life cycle of an industrial molluscicide began with initial toxicity screening in the laboratory. The evaluation continued at plant sites through field trials and applications. Lessons learned from these experiences helped direct the efforts toward the development of a second generation program.

  6. High Temperature Gas-Cooled Reactors Lessons Learned Applicable to the Next Generation Nuclear Plant

    Energy Technology Data Exchange (ETDEWEB)

    J. M. Beck; L. F. Pincock

    2011-04-01

    The purpose of this report is to identify possible issues highlighted by these lessons learned that could apply to the NGNP in reducing technical risks commensurate with the current phase of design. Some of the lessons learned have been applied to the NGNP and documented in the Preconceptual Design Report. These are addressed in the background section of this document and include, for example, the decision to use TRISO fuel rather than BISO fuel used in the Peach Bottom reactor; the use of a reactor pressure vessel rather than prestressed concrete found in Fort St. Vrain; and the use of helium as a primary coolant rather than CO2. Other lessons learned, 68 in total, are documented in Sections 2 through 6 and will be applied, as appropriate, in advancing phases of design. The lessons learned are derived from both negative and positive outcomes from prior HTGR experiences. Lessons learned are grouped according to the plant, areas, systems, subsystems, and components defined in the NGNP Preconceptual Design Report, and subsequent NGNP project documents.

  7. High Temperature Gas-Cooled Reactors Lessons Learned Applicable to the Next Generation Nuclear Plant

    International Nuclear Information System (INIS)

    Beck, J.M.; Collins, J.W.; Garcia, C.B.; Pincock, L.F.

    2010-01-01

    High Temperature Gas Reactors (HTGR) have been designed and operated throughout the world over the past five decades. These seven HTGRs are varied in size, outlet temperature, primary fluid, and purpose. However, there is much the Next Generation Nuclear Plant (NGNP) has learned and can learn from these experiences. This report captures these various experiences and documents the lessons learned according to the physical NGNP hardware (i.e., systems, subsystems, and components) affected thereby.

  8. Prototype Applications Of Blended Learning On The Lessons Of Project Management Information System MPSI In College

    Directory of Open Access Journals (Sweden)

    Riswan

    2015-08-01

    Full Text Available This research is further than the initial research has been done on the lessons of project management information system MPSI. Included in the seminar of the International Conference on Technical and Vocation Education and Training High on a hill on the 16th-17th-October 2015 organized by the State University of Padang UNP. As well as on The 2016 Jambi International Seminars on Education JISE in Jambi Indonesia 3-4 April 2016. The results of initial research showed that the quality of the teaching model of face-to-face with MPSI konvensioanal are on enough categories so that needs to be developed a Blended Learning model that is merging model of face-to-face with e-learning model in order to improve the quality of teaching for the better. The results of a pretest data analysis on a class of experiments and classroom control showed results not much different 12.32 for classes experiments and 11.12 for the classroom control. Test of normality that is done for the second class also shows a normal distribution. Where r count for a class experiment 00060 01772 r tables and r count for class control 00572 01772 r tables. Now this research has already come to the stage of prototype application design blended learning will be in validation by an expert of computer design.

  9. Lessons learned in the verification, validation and application of a coupled heat and fluid flow code

    International Nuclear Information System (INIS)

    Tsang, C.F.

    1986-01-01

    A summary is given of the authors recent studies in the verification, validation and application of a coupled heat and fluid flow code. Verification has been done against eight analytic and semi-analytic solutions. These solutions include those involving thermal buoyancy flow and fracture flow. Comprehensive field validation studies over a period of four years are discussed. The studies are divided into three stages: (1) history matching, (2) double-blind prediction and confirmation, (3) design optimization. At each stage, parameter sensitivity studies are performed. To study the applications of mathematical models, a problem proposed by the International Energy Agency (IEA) is solved using this verified and validated numerical model as well as two simpler models. One of the simpler models is a semi-analytic method assuming the uncoupling of the heat and fluid flow processes. The other is a graphical method based on a large number of approximations. Variations are added to the basic IEA problem to point out the limits of ranges of applications of each model. A number of lessons are learned from the above investigations. These are listed and discussed

  10. The regulatory control over radiation sources: the Brazilian experience and some lessons learned from industrial applications

    International Nuclear Information System (INIS)

    Costa, E.L.C.; Gomes, J.D.R.L.; Gomes, R.S.; Costa, M.L.L.; Thomé, Z.D.; Instituto Militar de Engenharia

    2017-01-01

    This study gives an overview of the activities of the National Commission of Nuclear Energy (CNEN), as the Brazilian nuclear regulatory authority. These activities are described, especially those related to management of orphan sources and radioactive material in scrap metal considering the actions already put into place by CNEN during the licensing and controlling of radioactive sources in the industry and other facilities. In Brazil, there is not yet an effective system for controlling the scrap metal and recycling industry, thus a coordinated approach to achieve a harmonized and effective response with the involvement of third parties is needed, especially the metal industries and ores facilities. These practices call for stringent regulatory control, in order to reduce the occurrence of orphan sources, and consequently, radioactive material appearing in scrap metal. Some challenges of managing the national radiation sources register systems will be discussed, in order to cover effectively all the radiation source history (in a 'from the cradle to the grave' basis), and the dynamic maintenance and update of these data. The main industrial applications considered in this work are those dealing with constant movement of sources all over the country, with geographical issues to be considered in the managing and controlling actions, such as gammagraphy and well-logging. This study aims to identify and promote good practices to prevent inadvertent diversion of radioactive material, taking into account existing international recommendations and some lessons learned in national level. (author)

  11. The regulatory control over radiation sources: the Brazilian experience and some lessons learned from industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Costa, E.L.C.; Gomes, J.D.R.L.; Gomes, R.S.; Costa, M.L.L.; Thomé, Z.D., E-mail: evaldo@cnen.gov.br, E-mail: jlopes@cnen.gov.br, E-mail: rogeriog@cnen.gov.br, E-mail: mara@cnen.gov.br, E-mail: zielithome@gmail.com [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Diretoria de Radioproteção e Segurança Nuclear; Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Seção de Engenharia Nuclear

    2017-11-01

    This study gives an overview of the activities of the National Commission of Nuclear Energy (CNEN), as the Brazilian nuclear regulatory authority. These activities are described, especially those related to management of orphan sources and radioactive material in scrap metal considering the actions already put into place by CNEN during the licensing and controlling of radioactive sources in the industry and other facilities. In Brazil, there is not yet an effective system for controlling the scrap metal and recycling industry, thus a coordinated approach to achieve a harmonized and effective response with the involvement of third parties is needed, especially the metal industries and ores facilities. These practices call for stringent regulatory control, in order to reduce the occurrence of orphan sources, and consequently, radioactive material appearing in scrap metal. Some challenges of managing the national radiation sources register systems will be discussed, in order to cover effectively all the radiation source history (in a 'from the cradle to the grave' basis), and the dynamic maintenance and update of these data. The main industrial applications considered in this work are those dealing with constant movement of sources all over the country, with geographical issues to be considered in the managing and controlling actions, such as gammagraphy and well-logging. This study aims to identify and promote good practices to prevent inadvertent diversion of radioactive material, taking into account existing international recommendations and some lessons learned in national level. (author)

  12. Lessons Learned while Exploring Cloud-Native Architectures for NASA EOSDIS Applications and Systems

    Science.gov (United States)

    Pilone, D.

    2016-12-01

    As new, high data rate missions begin collecting data, the NASA's Earth Observing System Data and Information System (EOSDIS) archive is projected to grow roughly 20x to over 300PBs by 2025. To prepare for the dramatic increase in data and enable broad scientific inquiry into larger time series and datasets, NASA has been exploring the impact of applying cloud technologies throughout EOSDIS. In this talk we will provide an overview of NASA's prototyping and lessons learned in applying cloud architectures to: Highly scalable and extensible ingest and archive of EOSDIS data Going "all-in" on cloud based application architectures including "serverless" data processing pipelines and evaluating approaches to vendor-lock in Rethinking data distribution and approaches to analysis in a cloud environment Incorporating and enforcing security controls while minimizing the barrier for research efforts to deploy to NASA compliant, operational environments. NASA's Earth Observing System (EOS) is a coordinated series of satellites for long term global observations. NASA's Earth Observing System Data and Information System (EOSDIS) is a multi-petabyte-scale archive of environmental data that supports global climate change research by providing end-to-end services from EOS instrument data collection to science data processing to full access to EOS and other earth science data. On a daily basis, the EOSDIS ingests, processes, archives and distributes over 3 terabytes of data from NASA's Earth Science missions representing over 6000 data products ranging from various types of science disciplines. EOSDIS has continually evolved to improve the discoverability, accessibility, and usability of high-impact NASA data spanning the multi-petabyte-scale archive of Earth science data products.

  13. St. Louis FUSRAP Lessons Learned

    International Nuclear Information System (INIS)

    Eberlin, J.; Williams, D.; Mueller, D.

    2003-01-01

    The purpose of this paper is to present lessons learned from fours years' experience conducting Remedial Investigation and Remedial Action activities at the St. Louis Downtown Site (SLDS) under the Formerly Utilized Sites Remedial Action Program (FUSRAP). Many FUSRAP sites are experiencing challenges conducting Remedial Actions within forecasted volume and budget estimates. The St. Louis FUSRAP lessons learned provide insight to options for cost effective remediation at FUSRAP sites. The lessons learned are focused on project planning (budget and schedule), investigation, design, and construction

  14. Lessons learned in radiology

    International Nuclear Information System (INIS)

    Goodenough, D.J.

    2001-01-01

    The paper reviews aspects of the history of radiology with the goal of identifying lessons learned, particularly in the area of radiological protection of the patient in diagnostic and interventional radiology, nuclear medicine and radiotherapy. It is pointed out that since the days of Roentgen there has been a need not only to control and quantify the amount of radiation reaching the patient but also to optimize the imaging process to offer the greatest diagnostic benefit within allowable levels of patient dose. To this end, in diagnostic radiology, one finds the development of better films, X rays tubes, grids, screens and processing techniques, while in fluoroscopy, one sees the increased luminance of calcium tungstate. In interventional radiology, one finds an improvement in catheterization techniques and contrast agents. In nuclear medicine, the development of tracer techniques into modern cameras and isotopes such as technetium can be followed. In radiotherapy, one sees the early superficial X rays and radium sources gradually replaced with radon seeds, supervoltage, 60 Co and today's linear accelerators. Along with the incredible advances in imaging and therapeutic technologies comes the growing realization of the potential danger of radiation and the need to protect the patient (as well as physicians, ancillary personnel and the general population) from unnecessary radiation. The important lesson learned is that we must walk a tightrope, balancing the benefits and risks of any technology utilizing radiation to produce the greatest benefits at the lowest acceptable risk. The alternative techniques using non-ionizing radiation will have to be considered as part of the general armamentarium for medical imaging whenever radiation consequences are unacceptable. (author)

  15. Lessons Learned from FUSRAP

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, Darina [U.S. Department of Energy, Office of Legacy Management; Carpenter, Cliff [U.S. Department of Energy, Office of Legacy Management; Miller, Michele [Navarro Research and Engineering

    2016-03-06

    The US DOE Office of Legacy Management (LM) is the long-term steward for 90 sites remediated under numerous regulatory regimes including the Formerly Utilized Sites Remedial Action Program (FUSRAP) sites. In addition, LM holds considerable historical information, gathered in the 1970s, to determine site eligibility for remediation under FUSRAP. To date, 29 FUSRAP sites are in LM’s inventory of sites for long-term surveillance and maintenance (LTS&M), and 25 are with the US Army Corps of Engineers (USACE) for remediation or in the process of being transitioned to LM. It is forecasted that 13 FUSRAP sites will transfer from the USACE to LM over the next 10 years; however, the timing of the transfers is strongly dependent upon federal funding of the ongoing remedial actions. Historically, FUSRAP sites were generally cleaned up for “unrestricted” industrial use or remediated to the “cleanup standards” at that time, and their use remained unchanged. Today, these sites as well as the adjacent properties are now changing or envisioned to have changes in land use, typically from industrial to commercial or residential uses. The implication of land-use change affects DOE’s LTS&M responsibility for the sites under LM stewardship as well as the planning for the additional sites scheduled to transition in time. Coinciding with land-use changes at or near FUSRAP sites is an increased community awareness of these sites. As property development increases near FUSRAP sites, the general public and interested stakeholders regularly inquire about the sufficiency of cleanups that impact their neighborhoods and communities. LM has used this experience to address a series of lessons learned to improve our program management in light of the changing conditions of our sites. We describe these lessons learned as (1) improved stakeholder relations, (2) enhanced LTS&M requirements for the sites, and (3) greater involvement in the transition process.

  16. Higher Education ERP: Lessons Learned.

    Science.gov (United States)

    Swartz, Dave; Orgill, Ken

    2001-01-01

    Shares experiences and lessons learned by chief information officers of large universities about enterprise resource planning (ERP). Specifically, provides a framework for approaching an ERP that could save universities millions of dollars. (EV)

  17. Twenty years' application of agricultural countermeasures following the Chernobyl accident: lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Fesenko, S V [International Atomic Energy Agency, 1400 Vienna (Austria); Alexakhin, R M [Russian Institute of Agricultural Radiology and Agroecology, 249020 Obninsk (Russian Federation); Balonov, M I [International Atomic Energy Agency, 1400 Vienna (Austria); Bogdevich, I M [Research Institute for Soil Science and Agrochemistry, Minsk (Belarus); Howard, B J [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom); Kashparov, V A [Ukrainian Institute of Agricultural Radiology (UIAR), Mashinostroiteley Street 7, Chabany, Kiev Region 08162 (Ukraine); Sanzharova, N I [Russian Institute of Agricultural Radiology and Agroecology, 249020 Obninsk (Russian Federation); Panov, A V [Russian Institute of Agricultural Radiology and Agroecology, 249020 Obninsk (Russian Federation); Voigt, G [International Atomic Energy Agency, 1400 Vienna (Austria); Zhuchenka, Yu M [Research Institute of Radiology, 246000 Gomel (Belarus)

    2006-12-15

    The accident at the Chernobyl NPP (nuclear power plant) was the most serious ever to have occurred in the history of nuclear energy. The consumption of contaminated foodstuffs in affected areas was a significant source of irradiation for the population. A wide range of different countermeasures have been used to reduce exposure of people and to mitigate the consequences of the Chernobyl accident for agriculture in affected regions in Belarus, Russia and Ukraine. This paper for the first time summarises key data on countermeasure application over twenty years for all three countries and describes key lessons learnt from this experience. (review)

  18. Twenty years' application of agricultural countermeasures following the Chernobyl accident: lessons learned

    International Nuclear Information System (INIS)

    Fesenko, S V; Alexakhin, R M; Balonov, M I; Bogdevich, I M; Howard, B J; Kashparov, V A; Sanzharova, N I; Panov, A V; Voigt, G; Zhuchenka, Yu M

    2006-01-01

    The accident at the Chernobyl NPP (nuclear power plant) was the most serious ever to have occurred in the history of nuclear energy. The consumption of contaminated foodstuffs in affected areas was a significant source of irradiation for the population. A wide range of different countermeasures have been used to reduce exposure of people and to mitigate the consequences of the Chernobyl accident for agriculture in affected regions in Belarus, Russia and Ukraine. This paper for the first time summarises key data on countermeasure application over twenty years for all three countries and describes key lessons learnt from this experience. (review)

  19. Results and lessons learned of the first edition of the master in nuclear engineering and applications (MINA)

    International Nuclear Information System (INIS)

    Herranz, Luis E.; Garcia, Juan c.; Falcon, Susana; Marco, Maria l.; Gonzalez Romero, Enrique M.; Casas, Jose A.

    2010-01-01

    The Master in Nuclear Engineering and Applications (MINA) was born to build up a bridge between University education and the technical skills demanded by nuclear industry and organizations, particularly in Spain. Motivated by nuclear renaissance, knowledge preservation and the bases of the European Education area, the new approach adopted to accomplish such a challenge has been heavily based on a professional profile defined by the Spanish nuclear community. The first edition success (MINA-2008) has been assessed through a set of indicators, which encompass a broad range of aspects, from the number of registrations to the employment rate. This paper summarizes and discusses such an assessment. Additionally, a critical thorough review has allowed identifying a few aspects that could be improved. All the lessons learned have been translated into specific measures implemented in the MINA-2009 edition. Among the indicators, participation and industrial support were considered of utmost importance. MINA-2008 had 18 students, out of which 60% were financially supported to some extent thanks to the nuclear industry and organizations (during the conduction of the master project, this support was even enhanced). Beyond the economic contribution, nuclear companies and institutions were strongly involved in all the phases of MINA-2008, from the definition of the program up to the supervision of more than 70 % of the master projects. As a result of the lessons learned, the subjects have been grouped in modules and a more practical approach has been pursued in the teaching/learning process. (authors)

  20. Results and lessons learned of the first edition of the master in nuclear engineering and applications (MINA)

    Energy Technology Data Exchange (ETDEWEB)

    Herranz, Luis E.; Garcia, Juan c.; Falcon, Susana; Marco, Maria l.; Gonzalez Romero, Enrique M. [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT), Avda. Complutense, 22. 28040 Madrid (Spain); Casas, Jose A. [Universidad Autonoma de Madrid, Seccion Departamental de Ingenieria Quimica, 28049 Cantoblanco, Madrid (Spain)

    2010-07-01

    The Master in Nuclear Engineering and Applications (MINA) was born to build up a bridge between University education and the technical skills demanded by nuclear industry and organizations, particularly in Spain. Motivated by nuclear renaissance, knowledge preservation and the bases of the European Education area, the new approach adopted to accomplish such a challenge has been heavily based on a professional profile defined by the Spanish nuclear community. The first edition success (MINA-2008) has been assessed through a set of indicators, which encompass a broad range of aspects, from the number of registrations to the employment rate. This paper summarizes and discusses such an assessment. Additionally, a critical thorough review has allowed identifying a few aspects that could be improved. All the lessons learned have been translated into specific measures implemented in the MINA-2009 edition. Among the indicators, participation and industrial support were considered of utmost importance. MINA-2008 had 18 students, out of which 60% were financially supported to some extent thanks to the nuclear industry and organizations (during the conduction of the master project, this support was even enhanced). Beyond the economic contribution, nuclear companies and institutions were strongly involved in all the phases of MINA-2008, from the definition of the program up to the supervision of more than 70 % of the master projects. As a result of the lessons learned, the subjects have been grouped in modules and a more practical approach has been pursued in the teaching/learning process. (authors)

  1. Patient safety: lessons learned

    International Nuclear Information System (INIS)

    Bagian, James P.

    2006-01-01

    The traditional approach to patient safety in health care has ranged from reticence to outward denial of serious flaws. This undermines the otherwise remarkable advances in technology and information that have characterized the specialty of medical practice. In addition, lessons learned in industries outside health care, such as in aviation, provide opportunities for improvements that successfully reduce mishaps and errors while maintaining a standard of excellence. This is precisely the call in medicine prompted by the 1999 Institute of Medicine report ''To Err Is Human: Building a Safer Health System.'' However, to effect these changes, key components of a successful safety system must include: (1) communication, (2) a shift from a posture of reliance on human infallibility (hence ''shame and blame'') to checklists that recognize the contribution of the system and account for human limitations, and (3) a cultivation of non-punitive open and/or de-identified/anonymous reporting of safety concerns, including close calls, in addition to adverse events. (orig.)

  2. NDE performance demonstration in the US nuclear power industry - applications, costs, lessons learned, and connection to NDE reliability

    International Nuclear Information System (INIS)

    Ammirato, F.

    1997-01-01

    Periodic inservice inspection (ISI) of nuclear power plant components is performed in the United States to satisfy legal commitments and to provide plant owners with reliable information for managing degradation. Performance demonstration provides credible evidence that ISI will fulfill its objectives. This paper examines the technical requirements for inspection and discusses how these technical needs are used to develop effective performance demonstration applications. NDE reliability is discussed with particular reference to its role in structural integrity assessments and its connection with performance demonstration. It is shown that the role of NDE reliability can range from very small to critical depending on the particular application and must be considered carefully in design of inspection techniques and performance demonstration programs used to qualify the inspection. Finally, the costs, benefits, and problems associated with performance demonstration are reviewed along with lessons learned from more than 15 years of performance demonstration experience in the US. (orig.)

  3. Lessons learned related to packaging and transportation

    International Nuclear Information System (INIS)

    Wallen, C.

    1995-01-01

    The use of lessons learned as a tool for learning from past experiences is well established, especially by many organizations within the nuclear industry. Every person has, at some time, used the principles of lessons learned to adopt good work practices based on their own experiences or the experiences of others. Lessons learned can also help to avoid the recurrence of adverse practices, which is often an area that most lessons-learned programs tend to focus on. This paper will discuss how lessons learned relate to packaging and transportation issues and events experienced at Department of Energy (DOE) facilities. It will also discuss the role performed by the Office of Nuclear and Facility Safety's Office of Operating Experience Analysis and Feedback in disseminating lessons learned and operating experience feedback to the DOE complex. The central concept of lessons learned is that any organization should be able to learn from its own experiences and events. In addition, organizations should implement methodologies to scan external environments for lessons learned, to analyze and determine the relevance of lessons learned, and to bring about the necessary changes learned from these experiences. With increased concerns toward facility safety, the importance of utilizing the lessons-learned principles and the establishment of lessons-learned programs can not be overstated

  4. Trends and Lessons Learned in Interdisciplinary and Non-Business Case Method Application.

    Science.gov (United States)

    Anyansi-Archibong, Chi; Czuchry, Andrew J.; House, Claudia S.; Cicirello, Tony

    2000-01-01

    Presents results of a survey designed to test the level of development and application of cases in non-business courses such as sciences, mathematics, engineering, health, and technology. Findings support the growing popularity of the case method of teaching and learning outside the business domain. Suggests a framework for establishing win-win…

  5. EMU Lessons Learned Database

    Science.gov (United States)

    Matthews, Kevin M., Jr.; Crocker, Lori; Cupples, J. Scott

    2011-01-01

    As manned space exploration takes on the task of traveling beyond low Earth orbit, many problems arise that must be solved in order to make the journey possible. One major task is protecting humans from the harsh space environment. The current method of protecting astronauts during Extravehicular Activity (EVA) is through use of the specially designed Extravehicular Mobility Unit (EMU). As more rigorous EVA conditions need to be endured at new destinations, the suit will need to be tailored and improved in order to accommodate the astronaut. The Objective behind the EMU Lessons Learned Database(LLD) is to be able to create a tool which will assist in the development of next-generation EMUs, along with maintenance and improvement of the current EMU, by compiling data from Failure Investigation and Analysis Reports (FIARs) which have information on past suit failures. FIARs use a system of codes that give more information on the aspects of the failure, but if one is unfamiliar with the EMU they will be unable to decipher the information. A goal of the EMU LLD is to not only compile the information, but to present it in a user-friendly, organized, searchable database accessible to all familiarity levels with the EMU; both newcomers and veterans alike. The EMU LLD originally started as an Excel database, which allowed easy navigation and analysis of the data through pivot charts. Creating an entry requires access to the Problem Reporting And Corrective Action database (PRACA), which contains the original FIAR data for all hardware. FIAR data are then transferred to, defined, and formatted in the LLD. Work is being done to create a web-based version of the LLD in order to increase accessibility to all of Johnson Space Center (JSC), which includes converting entries from Excel to the HTML format. FIARs related to the EMU have been completed in the Excel version, and now focus has shifted to expanding FIAR data in the LLD to include EVA tools and support hardware such as

  6. Refrigerator retirement and replacement programs : lessons learned and application to an Ontario wide program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-05-15

    The best practices in refrigerator retirement programs in North America were identified in an effort to develop a concept for an Ontario-wide provincial refrigerator retirement program. The report focused on describing refrigerator retirement programs, namely those programs that focused on getting rid of old secondary refrigerators. The report excluded refrigerator replacement programs, which encourage householders to retire their refrigerators early and replace them with an energy star refrigerator. However, it was noted that in several regions, both replacement and retirement programs are offered at the same time. The report provided background information on energy use by refrigerators as well as refrigerator retirement and replacement programs. Types of refrigerator retirement and replacement programs and the environmental benefits of these programs were also described. The report also addressed the potential energy impact of an Ontario-wide refrigerator retirement program as well as consumer incentive and bounties initiatives to encourage households to retire units. Other topics covered in the report included the design of typical refrigerator retirement and replacement programs; collection and recycling of retired refrigerators; reported costs of refrigerator retirement and replacement programs; as well as marketing and advertising. The role of retailers and manufacturers and reported lessons learned from refrigerator retirement and replacement were also presented. 14 refs., 6 tabs., 6 appendices.

  7. Application of GM crops in Sub-Saharan Africa: lessons learned from Green Revolution.

    Science.gov (United States)

    Bazuin, Sjoerd; Azadi, Hossein; Witlox, Frank

    2011-01-01

    While the Green Revolution has been successful in some regions like South and East Asia, it could hardly address any achievement in Sub-Saharan Africa (SSA). This paper tries to draw a picture on lessons learned from the failures of this revolution that should be taken into account before implementing the so-called Gene Revolution in the SSA region. After scrutinizing the failures and the pros and cons of GM crops in the region, the paper introduces some potentials for improving the malnutrition situation in SSA through launching a successful GM technology. However, it remains doubtful whether this technology can improve the situation of small-scale farmers as long as they receive no financial support from their national governments. Therefore, before any intervention, the socio-economic and environmental impacts of GM technology need to be carefully addressed in the framework of a series of risk assessment studies. Besides, some sort of multi-stakeholder dialog (from small-scale farmers to consumers) involving public-private sector and non-governmental organizations should be heated up at both national and regional levels with regard to the myths and truths of this technology. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Field experience with the application and operation of permanent magnet motors in the ESP Industry: success stories and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Sagalovskiy, A.; Gorshenin, K. [Borets Company, Moscow (Russian Federation)

    2012-07-01

    Over the past 7 years Borets Company has commercialized a permanent magnet motor (PMM) with a specialized controller that is capable of replacing the traditional motor used in ESP systems. Since 2006 more than 1400 Borets Company PMM systems have been installed by oil companies. This paper will provide an overview of the application environment covered by these installations and contrast the performance for the PMM system versus the traditional 2- pole, 3-phase ESP systems that were replaced. Results will include the lessons learned, best practices developed, and benefits realized by the operator. The PMM practice will be of value to new operators as this technology is introduced to other regions of the globe as well as the expansion of this technology into the ESPCP-PMM market. (author)

  9. Field observations and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Joh B [Los Alamos National Laboratory

    2010-01-01

    This presentation outlines observations and lessons learned from the Megaports program. It provides: (1) details of field and technical observations collected during LANL field activities at ports around the world and details of observations collected during radiation detections system testing at Los Alamos National Laboratory; (2) provides suggestions for improvement and efficiency; and (3) discusses possible program execution changes for more effective operations.

  10. Lessons learned in crisis management.

    Science.gov (United States)

    Olson, Chris

    2014-01-01

    This paper will explore lessons learned following a series of natural and man-made disasters affecting the Massachusetts Mutual Life Insurance Company and/or its subsidiaries. The company employs a team of certified continuity professionals who are charged with overseeing resilience on behalf of the enterprise and leading recovery activities wherever and whenever necessary.

  11. Basic safety principles: Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Erp, J.B. van [Argonne National Lab., IL (United States)

    1997-09-01

    The presentation reviews the following issues: basic safety principles and lessons learned; some conclusions from the Kemeny report on the accident at TMI; some recommendations from the Kemeny report on the accident at TMI; conclusions and recommendations from the Rogovin report on the accident on TMI; instrumentation deficiencies (from Rogovin report).

  12. Basic safety principles: Lessons learned

    International Nuclear Information System (INIS)

    Erp, J.B. van

    1997-01-01

    The presentation reviews the following issues: basic safety principles and lessons learned; some conclusions from the Kemeny report on the accident at TMI; some recommendations from the Kemeny report on the accident at TMI; conclusions and recommendations from the Rogovin report on the accident on TMI; instrumentation deficiencies (from Rogovin report)

  13. Constellation Lessons Learned Executive Summary

    Science.gov (United States)

    Thomas, L. Dale; Neubek, Deb

    2011-01-01

    This slide presentation reviews the lessons learned from the Constellation Program (CxP) and identified several factors that contributed to the inability of the CxP to meet the cost and schedule commitments. The review includes a significant section on the context in which the CxP operated since new programs are likely to experience the same constraints.

  14. Value pricing pilot program : lessons learned

    Science.gov (United States)

    2008-08-01

    This "Lessons Learned Report" provides a summary of projects sponsored by the Federal Highway Administration's (FHWA's) Congestion and Value Pricing Pilot Programs from 1991 through 2006 and draws lessons from a sample of projects with the richest an...

  15. The X-15 airplane - Lessons learned

    Science.gov (United States)

    Dana, William H.

    1993-01-01

    The X-15 rocket research airplane flew to an altitude of 354,000 ft and reached Mach 6.70. In almost 200 flights, this airplane was used to gather aerodynamic-heating, structural loads, stability and control, and atmospheric-reentry data. This paper describes the origins, design, and operation of the X-15 airplane. In addition, lessons learned from the X-15 airplane that are applicable to designing and testing the National Aero-Space Plane are discussed.

  16. Shuttle Lesson Learned - Toxicology

    Science.gov (United States)

    James, John T.

    2010-01-01

    This is a script for a video about toxicology and the space shuttle. The first segment is deals with dust in the space vehicle. The next segment will be about archival samples. Then we'll look at real time on-board analyzers that give us a lot of capability in terms of monitoring for combustion products and the ability to monitor volatile organics on the station. Finally we will look at other issues that are about setting limits and dealing with ground based lessons that pertain to toxicology.

  17. Selected Lessons Learned through the ISS Design, Development, Assembly, and Operations: Applicability to International Cooperation for Standardization

    Science.gov (United States)

    Hirsch, David B.

    2009-01-01

    This slide presentation reviews selected lessons that were learned during the design, development, assembly and operation of the International Space Station. The critical importance of standards and common interfaces is emphasized to create a common operation environment that can lead to flexibility and adaptability.

  18. Selected Lessons Learned over the ISS Design, Development, Assembly, and Operations: Applicability to International Cooperation for Standardization

    Science.gov (United States)

    Hirsch, David B.

    2010-01-01

    This slide presentation reviews some of the lessons learned in the sphere of international cooperation during the development, assembly and operation of the International Space Station. From the begining all Partners shared a common objective to build, operate and utilize a crewed laboratory in low orbit as an international partnership. The importance of standards is emphasized.

  19. WHC significant lessons learned 1993--1995

    Energy Technology Data Exchange (ETDEWEB)

    Bickford, J.C.

    1997-12-12

    A lesson learned as defined in DOE-STD-7501-95, Development of DOE Lessons Learned Programs, is: A ``good work practice`` or innovative approach that is captured and shared to promote repeat applications or an adverse work practice or experience that is captured and shared to avoid a recurrence. The key word in both parts of this definition is ``shared``. This document was published to share a wide variety of recent Hanford experiences with other DOE sites. It also provides a valuable tool to be used in new employee and continuing training programs at Hanford facilities and at other DOE locations. This manual is divided into sections to facilitate extracting appropriate subject material when developing training modules. Many of the bulletins could be categorized into more than one section, however, so examination of other related sections is encouraged.

  20. Brentwood Lessons Learned Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Rivkin, Carl H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caton, Melanie C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Christopher D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcinkoski, Jason [Dept. of Energy (DOE), Washington DC (United States)

    2017-09-26

    The purpose of this report is to document lessons learned in the installation of the hydrogen fueling station at the National Park Service Brentwood site in Washington, D.C., to help further the deployment of hydrogen infrastructure required to support hydrogen and other fuel cell technologies. Hydrogen fueling is the most difficult infrastructure component to build and permit. Hydrogen fueling can include augmenting hydrogen fueling capability to existing conventional fuel fueling stations as well as building brand new hydrogen fueling stations. This report was produced as part of the Brentwood Lessons Learned project. The project consisted of transplanting an existing modular hydrogen fueling station from Connecticut to the National Park Service Brentwood site. This relocation required design and construction at the Brentwood site to accommodate the existing station design as well as installation and validation of the updated station. One of the most important lessons learned was that simply moving an existing modular station to an operating site was not necessarily straight-forward - performing the relocation required significant effort and cost. The station has to function at the selected operating site and this functionality requires a power supply, building supports connecting to an existing alarm system, electrical grounding and lighting, providing nitrogen for purging, and providing deionized water if an electrolyzer is part of the station package. Most importantly, the station has to fit into the existing site both spatially and operationally and not disrupt existing operations at the site. All of this coordination and integration requires logistical planning and project management. The idea that a hydrogen fueling station can be simply dropped onto a site and made immediately operational is generally not realistic. Other important lessons learned include that delineating the boundaries of the multiple jurisdictions that have authority over a project for

  1. The effect of application of contextual teaching and learning (CTL model-based on lesson study with mind mapping media to assess student learning outcomes on chemistry on colloid systems

    Directory of Open Access Journals (Sweden)

    Annisa Fadillah

    2017-08-01

    Full Text Available The research was conducted to determine the effect of the application of CTL learning model based on lesson study with mind mapping media to the learning outcomes of students on colloid systems. The population of this research was all students of grade XI of SMA N 1 Sunggal. The sample was taken using on the purposive random sampling. The Experiment class was taught with Contextual Teaching and Learning (CTL model based on Lesson Study with Mind Mapping media and the control class taught with conventional learning model. The data was collected using an objective test was consisting of 20 questions which validity, reliability, level of difficulty and power of difference had been tested. T test results showed that tcalculate = 2.1 and ttable = 1.6697 thus tcalculate> ttable which means that Ha is accepted and Ho is rejected. The enhancement of the student learning outcomes showed that the results of experiment class are g = 72.88%, while the control class is 68.97%. From the percentage, it can be seen that learning outcomes of the experiment class are greater than the control class. The analysis of developing cognitive aspects pointed out that C1 = 70.02%, C2 = 73.58%, C3 = 68.63%, Thus the domain of cognitive level are on the cognitive aspects of C2. The result of Lesson Study Analysis showed the results of 71.09% at the first lesson and 88.28% at the second lesson. It means that there is increasing adherence to the indicators after two lessons. Based on the above results, it can be concluded that the result of studying chemistry of the students of class XI of SMA Negeri I Sunggal TA 2014/2015 taught by a CTL model based  on Lesson Study with Mind Mapping media was higher (72.88% than those taught by conventional learning models (68.97% in the subject matter of colloids System.

  2. Mobile health applications to assist patients with diabetes: lessons learned and design implications.

    Science.gov (United States)

    Årsand, Eirik; Frøisland, Dag Helge; Skrøvseth, Stein Olav; Chomutare, Taridzo; Tatara, Naoe; Hartvigsen, Gunnar; Tufano, James T

    2012-09-01

    Self-management is critical to achieving diabetes treatment goals. Mobile phones and Bluetooth® can supportself-management and lifestyle changes for chronic diseases such as diabetes. A mobile health (mHealth) research platform--the Few Touch Application (FTA)--is a tool designed to support the self-management of diabetes. The FTA consists of a mobile phone-based diabetes diary, which can be updated both manually from user input and automatically by wireless data transfer, and which provides personalized decision support for the achievement of personal health goals. Studies and applications (apps) based on FTAs have included: (1) automatic transfer of blood glucose (BG) data; (2) short message service (SMS)-based education for type 1diabetes (T1DM); (3) a diabetes diary for type 2 diabetes (T2DM); (4) integrating a patient diabetes diary with health care (HC) providers; (5) a diabetes diary for T1DM; (6) a food picture diary for T1DM; (7) physical activity monitoring for T2DM; (8) nutrition information for T2DM; (9) context sensitivity in mobile self-help tools; and (10) modeling of BG using mobile phones. We have analyzed the performance of these 10 FTA-based apps to identify lessons for designing the most effective mHealth apps. From each of the 10 apps of FTA, respectively, we conclude: (1) automatic BG data transfer is easy to use and provides reassurance; (2) SMS-based education facilitates parent-child communication in T1DM; (3) the T2DM mobile phone diary encourages reflection; (4) the mobile phone diary enhances discussion between patients and HC professionals; (5) the T1DM mobile phone diary is useful and motivational; (6) the T1DM mobile phone picture diary is useful in identifying treatment obstacles; (7) the step counter with automatic data transfer promotes motivation and increases physical activity in T2DM; (8) food information on a phone for T2DM should not be at a detailed level; (9) context sensitivity has good prospects and is possible to

  3. Comparisons and Lessons Learned

    NARCIS (Netherlands)

    Jensen, PA; van der Voordt, Theo; Coenen, C; Sarasoja, AL; van der Voordt, DJM; Jensen, PA; Coenen, C

    2012-01-01

    Purpose: To create an overview and evaluation of the achievements of the contributions in this book by identifying, summarising and discussing cross-cutting themes and essential learning points across the former chapters.
    Methodology: Based on a purposeful reading of all chapters comparisons are

  4. Research Data Curation Pilots: Lessons Learned

    Directory of Open Access Journals (Sweden)

    David Minor

    2014-07-01

    Full Text Available In the spring of 2011, the UC San Diego Research Cyberinfrastructure (RCI Implementation Team invited researchers and research teams to participate in a research curation and data management pilot program. This invitation took the form of a campus-wide solicitation. More than two dozen applications were received and, after due deliberation, the RCI Oversight Committee selected five curation-intensive projects. These projects were chosen based on a number of criteria, including how they represented campus research, varieties of topics, researcher engagement, and the various services required. The pilot process began in September 2011, and will be completed in early 2014. Extensive lessons learned from the pilots are being compiled and are being used in the on-going design and implementation of the permanent Research Data Curation Program in the UC San Diego Library. In this paper, we present specific implementation details of these various services, as well as lessons learned. The program focused on many aspects of contemporary scholarship, including data creation and storage, description and metadata creation, citation and publication, and long term preservation and access. Based on the lessons learned in our processes, the Research Data Curation Program will provide a suite of services from which campus users can pick and choose, as necessary. The program will provide support for the data management requirements from national funding agencies.

  5. Low level waste shipment accident lessons learned

    International Nuclear Information System (INIS)

    Rast, D.M.; Rowe, J.G.; Reichel, C.W.

    1995-01-01

    On October 1, 1994 a shipment of low-level waste from the Fernald Environmental Management Project, Fernald, Ohio, was involved in an accident near Rolla, Missouri. The accident did not result in the release of any radioactive material. The accident did generate important lessons learned primarily in the areas of driver and emergency response communications. The shipment was comprised of an International Standards Organization (ISO) container on a standard flatbed trailer. The accident caused the low-level waste package to separate from the trailer and come to rest on its top in the median. The impact of the container with the pavement and median inflicted relatively minor damage to the container. The damage was not substantial enough to cause failure of container integrity. The success of the package is attributable to the container design and the packaging procedures used at the Fernald Environmental Management Project for low-level waste shipments. Although the container survived the initial wreck, is was nearly breached when the first responders attempted to open the ISO container. Even though the container was clearly marked and the shipment documentation was technically correct, this information did not identify that the ISO container was the primary containment for the waste. The lessons learned from this accident have DOE complex wide applicability. This paper is intended to describe the accident, subsequent emergency response operations, and the lessons learned from this incident

  6. Lessons Learned for Decommissioning Planning

    International Nuclear Information System (INIS)

    Sohn, Wook; Kim, Young-gook; Kim, Hee-keun

    2015-01-01

    The purpose of this paper is to introduce the U.S. nuclear industrial's some key lessons learned especially for decommissioning planning based on which well informed decommissioning planning can be carried out. For a successful decommissioning, it is crucial to carry out a well-organized decommissioning planning before the decommissioning starts. This paper discussed four key factors which should be decided or considered carefully during the decommissioning planning period with introduction of related decommissioning lessons learned of U.S. nuclear industry. Those factors which have been discussed in this paper include the end state of a site, the overall decommissioning strategy, the management of the spent fuels, and the spent fuel pool island. Among them, the end state of a site should be decided first as it directs the whole decommissioning processes. Then, decisions on the overall decommissioning strategy (DECON vs. SAFSTOR) and the management of the spent fuels (wet vs. dry) should follow. Finally, the spent fuel pool island should be given due consideration because its implementation will result in much cost saving. Hopefully, the results of this paper would provide useful inputs to performing the decommissioning planing for the Kori unit 1

  7. Implementing US Department of Energy lessons learned programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The DOE Lessons Learned Handbook is a two-volume publication developed to supplement the DOE Lessons Learned Standard (DOE-STD-7501-95) with information that will organizations in developing or improving their lessons learned programs. Volume 1 includes greater detail than the Standard in areas such as identification and documentation of lessons learned; it also contains sections on specific processes such as training and performance measurement. Volume 2 (this document) contains examples of program documents developed by existing lessons learned programs as well as communications material, functional categories, transmittal documents, sources of professional and industry lessons learned, and frequently asked questions about the Lessons Learned List Service.

  8. Application of a Sweating Manikin Controlled by a Human Physiological Model and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Rugh, J.; Lustbader, J.

    2006-11-01

    Discusses two applications of NREL's suite of thermal comfort tools: one to assess impact of an automotive ventilated seat on comfort and fuel economy, and another to evaluate liquid cooling garments for NASA spacesuits.

  9. Lessons learned from implementation of a computerized application for pending tests at hospital discharge.

    Science.gov (United States)

    Dalal, Anuj K; Poon, Eric G; Karson, Andrew S; Gandhi, Tejal K; Roy, Christopher L

    2011-01-01

    Patients are often discharged from the hospital before test results are finalized. Awareness of these results is poor and therefore an important patient safety concern. Few computerized systems have been deployed at care transitions to address this problem. We describe an attempt to implement a computerized application to help inpatient physicians manage these test results. We modified an ambulatory electronic medical record (EMR)-based results management application to track pending tests at hospital discharge (Hospitalist Results Manager, HRM). We trained inpatient physicians at 2 academic medical centers to track these tests using this application. We surveyed inpatient physicians regarding usage of and satisfaction with the application, barriers to use, and the characteristics of an ideal system to track pending tests at discharge. Of 29 survey respondents, 14 (48%) reported never using HRM, and 13 (45%) used it 1 to 2 times per week. A total of 23 (79%) reported barriers prohibiting use, including being inundated with clinically "irrelevant" results, not having sufficient time, and a lack of integration of post-discharge test result management into usual workflow. Twenty-one (72%) wanted to receive notification of abnormal and clinician-designated pending test results. Twenty-seven physicians (93%) agreed that an ideally designed computerized application would be valuable for managing pending tests at discharge. Although inpatient physicians would highly value a computerized application to manage pending tests at discharge, the characteristics of an ideal system are unclear and there are important barriers prohibiting adoption and optimal usage of such systems. We outline suggestions for future electronic systems to manage pending tests at discharge. Copyright © 2010 Society of Hospital Medicine.

  10. Lessons learned from external hazards

    Energy Technology Data Exchange (ETDEWEB)

    Peinador, Miguel; Zerger, Benoit [European Commisison Joint Research Centre, Petten (Netherlands). Inst. for Energy and Transport; Ramos, Manuel Martin [European Commission Joint Research Centre, Brussels (Belgium). Nuclear Safety and Security Coordination; Wattrelos, Didier [Institut de Radioprotection et de Surete Nucleaire (IRSN), Fontenay-aux-Roses (France); Maqua, Michael [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Germany)

    2014-01-15

    This paper presents a study performed by the European Clearinghouse of the Joint Research Centre on Operational Experience for nuclear power plants in cooperation with IRSN and GRS covering events reported by nuclear power plants in relation to external hazards. It summarizes the review of 235 event reports from 3 different databases. The events were grouped in 9 categories according to the nature of the external hazard involved, and the specific lessons learned and recommendations that can be derived from each of these categories are presented. Additional 'cross-cutting' recommendations covering several or all the external hazards considered are also discussed. These recommendations can be useful in preventing this type of events from happening again or in limiting their consequences. The study was launched in 2010 and therefore it does not cover the Fukushima event. This paper presents the main findings and recommendations raised by this study. (orig.)

  11. Lessons learned: wrong intraocular lens.

    Science.gov (United States)

    Schein, Oliver D; Banta, James T; Chen, Teresa C; Pritzker, Scott; Schachat, Andrew P

    2012-10-01

    To report cases involving the placement of the wrong intraocular lens (IOL) at the time of cataract surgery where human error occurred. Retrospective small case series, convenience sample. Seven surgical cases. Institutional review of errors committed and subsequent improvements to clinical protocols. Lessons learned and changes in procedures adapted. The pathways to a wrong IOL are many but largely reflect some combination of poor surgical team communication, transcription error, lack of preoperative clarity in surgical planning or failure to match the patient, and IOL calculation sheet with 2 unique identifiers. Safety in surgery involving IOLs is enhanced both by strict procedures, such as an IOL-specific "time-out," and the fostering of a surgical team culture in which all members are encouraged to voice questions and concerns. Copyright © 2012 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  12. Lessons Learned on the Application of Vibration Absorbers for Enhanced Cannon Stabilization

    Directory of Open Access Journals (Sweden)

    Eric Kathe

    2001-01-01

    Full Text Available This paper will summarize the successful application of muzzle-end vibration absorbers to reduce cannon vibration. This technology constitutes a weapons stabilization approach that focuses on passive mechanical structural modification of the cannon, rather than relying upon an external control law to actively cancel vibrations. Challenges encountered during field testing, non-ideal behavior, and performance evaluation using digital signal processing will be highlighted.

  13. Planning geometry lessons with learning platforms

    DEFF Research Database (Denmark)

    Tamborg, Andreas Lindenskov

    mathematics teachers’ joint planning of a lesson in geometry with a learning platform called Meebook is analyzed using the instrumental approach. It is concluded that the interface in Meebook orients the teachers work toward what the students should do rather than what they should learn, although the latter......This paper investigates how mathematics teachers plan lessons with a recently implemented Danish learning platform designed to support teachers in planning lessons in line with a recent objective-oriented curriculum. Drawing on data from observations of and interviews with teachers, three...... is a key intention behind the implementation of the platform. It is also concluded that when the teachers succeed in using learning objectives actively in their planning, the objectives support the teachers in designing lessons that correspond with their intentions. The paper concludes with a discussion...

  14. Lessons Learned from Environmental Remediation Programmes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-15

    Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

  15. Lessons Learned from Environmental Remediation Programmes

    International Nuclear Information System (INIS)

    2014-01-01

    Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

  16. Lessons Learned from ISS Cooperation

    Science.gov (United States)

    Jolly, C.

    2002-01-01

    Forty years of human spaceflight activities are now culminating in the International Space Station program (ISS). The ISS involves fifteen nations, working together to create a permanently occupied orbital facility that will support scientific and potentially, commercial endeavours. The assembly of the ISS is scheduled to be completed later in this decade, after which it will be operated for at least ten years. At the strategic level, such a complex international project is highly dependent on the fifteen Partners' respective internal politics and foreign policies. On the operational level, Partners still have certain difficulties in issuing and agreeing to common technical procedures. As with almost all aspects of International Space Station cooperation, the Partners are going through a constant learning process, where they have to deal with complex political, legal and operational differences. Intergovernmental Agreement and the Memoranda of Understanding, the instruments forming the legal backbone of the International Space Station cooperation, are still lacking a fair number of arrangements that need to be created for completing and operating the Station. The whole endeavour is also a constant learning process at the operational level, as astronauts, cosmonauts, engineers and technicians on the ground with different cultural and educational backgrounds, learn to work together. One recent Space Shuttle mission to the Station showed the importance of standardising even trivial system components such as packaging labels, as it took the astronauts half a day more than planned to correctly unpack the equipment. This paper will provide a synthesis of some of the main lessons learned during the first few years of International Space Station's lifetime. Important political, legal and operational issues will be addressed and combined. This analysis will provide some guidelines and recommendations for future international space projects, such as an international human

  17. Lessons learned from accidents in radiotherapy

    International Nuclear Information System (INIS)

    Ortiz-Lopez, P.; Haywood, J.

    1996-01-01

    Radiotherapy is the only application of radiation which intentionally delivers very high doses to humans. A gross deviation from the prescribed dose or dose distribution can have severe, or even fatal consequences. Since the patient is placed directly in the beam or sources are inserted in the body, any mistake made with the beam or the sources leads almost certainly to an accidental exposure. Lessons learned from previous incidents can be used to test the vulnerability of a given facility, provided that these are adequately disseminated. The purpose of this paper is to present a summary of the lessons learned from a relatively large sample of events. The analysis has been presented as a short description followed by an identification of the triggering event and the contributing factors. These have been grouped as follows: errors in commissioning or calibration machines and sources affecting many patients; mistakes affecting individual patients such as irradiating the wrong patient, the wrong, field or site, and mistakes when entering data into or reading from the patient's chart; error due to unusual treatments or situations; equipment failure and human machine problems, including maintenance. (author). 1 ref

  18. Lessons learned from accidents in radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz-Lopez, P [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Safety; Novotny, J [University Hospital St. Rafael, Leuven (Belgium); Haywood, J [South Cleveland Hospital (United Kingdom). Cleveland Medical Physics Unit

    1996-08-01

    Radiotherapy is the only application of radiation which intentionally delivers very high doses to humans. A gross deviation from the prescribed dose or dose distribution can have severe, or even fatal consequences. Since the patient is placed directly in the beam or sources are inserted in the body, any mistake made with the beam or the sources leads almost certainly to an accidental exposure. Lessons learned from previous incidents can be used to test the vulnerability of a given facility, provided that these are adequately disseminated. The purpose of this paper is to present a summary of the lessons learned from a relatively large sample of events. The analysis has been presented as a short description followed by an identification of the triggering event and the contributing factors. These have been grouped as follows: errors in commissioning or calibration machines and sources affecting many patients; mistakes affecting individual patients such as irradiating the wrong patient, the wrong, field or site, and mistakes when entering data into or reading from the patient`s chart; error due to unusual treatments or situations; equipment failure and human machine problems, including maintenance. (author). 1 ref.

  19. Social support and child protection: Lessons learned and learning.

    Science.gov (United States)

    Thompson, Ross A

    2015-03-01

    Social support has been a topic of research for nearly 50 years, and its applications to prevention and intervention have grown significantly, including programs advancing child protection. This article summarizes the central conclusions of the 1994 review of research on social support and the prevention of child maltreatment prepared for the U.S. Advisory Board on Child Abuse and Neglect, and surveys advances in the field since its publication. Among the lessons learned twenty years ago are (a) the diversity of the social support needs of at-risk families and their association with child endangerment, (b) the need to supplement the emotionally affirmative aspects of social support with efforts to socialize parenting practices and monitor child well-being, (c) the desirability of integrating formal and informal sources of social support for recipients, and (d) the importance of considering the complex recipient reactions to receiving support from others. The lessons we are now learning derive from research exploring the potential of online communication to enhance social support, the neurobiology of stress and its buffering through social support, and the lessons of evaluation research that are identifying the effective ingredients of social support interventions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Learning to observe mathematical learning in lesson studies

    DEFF Research Database (Denmark)

    Rasmussen, Klaus; Østergaard, Camilla Hellsten; Foss, Kristian Kildemoes

    2016-01-01

    This poster deals with lesson study (LS) in pre-service teacher education. In particular how to prepare for, carry out, and reflect upon, observations of pupil learning. Observation is of crucial importance to the lesson study process, and here we present a study of observation features which ena...... enable or hinder fruitful lesson study. While substantial research has been carried out in the general field of bserving pupils’ learning processes and teachers’ pedagogical practice, little is known about this in the particular setting of lesson study....

  1. N Reactor Lessons Learned workshop

    International Nuclear Information System (INIS)

    Heaberlin, S.W.

    1993-07-01

    This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

  2. FRMAC-93 lessons learned report

    International Nuclear Information System (INIS)

    Kerns, K.C.

    1994-03-01

    FRMAC-93 simulated a radiological accident at the Fort Calhoun nuclear power plant, 25 miles north of Omaha, Nebraska. The exercise involved the state Iowa and Nebraska, NRC as the lead Federal agency, FRMAC (Federal Radiological Monitoring and Assessment Center), and several federal agencies with statutory emergency responsibility. FRMAC-93 was a major 2-day field exercise designed to determine the effectiveness, coordination, and operations of a DOE-managed FRMAC. Other objectives were to ensure that appropriate priorities were established and assistance was provided to the states and the lead Federal agency by FRMAC. Day 1 involved the Fort Calhoun evaluated plume phase exercise. On Day 2, the flow of data, which was slow initially, improved so that confidence of states and other federal responders in FRMAC support capabilities was high. The impact and lessons learned from FRMAC-93 provided the necessary impetus to make organizational and operational changes to the FRMAC program, which were put into effect in the DOE exercise FREMONT at Hanford 3 months later

  3. Science and Sandy: Lessons Learned

    Science.gov (United States)

    Werner, K.

    2013-12-01

    Following Hurricane Sandy's impact on the mid-Atlantic region, President Obama established a Task Force to '...ensure that the Federal Government continues to provide appropriate resources to support affected State, local, and tribal communities to improve the region's resilience, health, and prosperity by building for the future.' The author was detailed from NOAA to the Task Force between January and June 2013. As the Task Force and others began to take stock of the region's needs and develop plans to address them, many diverse approaches emerged from different areas of expertise including: infrastructure, management and construction, housing, public health, and others. Decision making in this environment was complex with many interests and variables to consider and balance. Although often relevant, science and technical expertise was not always at the forefront of this process. This talk describes the author's experience with the Sandy Task Force focusing on organizing scientific expertise to support the work of the Task Force. This includes a description of federal activity supporting Sandy recovery efforts, the role of the Task Force, and lessons learned from developing a science support function within the Task Force.

  4. Lessons learned from the 1994 Northridge Earthquake

    International Nuclear Information System (INIS)

    Eli, M.W.; Sommer, S.C.

    1995-01-01

    Southern California has a history of major earthquakes and also has one of the largest metropolitan areas in the United States. The 1994 Northridge Earthquake challenged the industrial facilities and lifetime infrastructure in the northern Los Angeles (LA) area. Lawrence Livermore National Laboratory (LLNL) sent a team of engineers to conduct an earthquake damage investigation in the Northridge area, on a project funded jointly by the United States Nuclear Regulatory Commission (USNRC) and the United States Department of Energy (USDOE). Many of the structures, systems, and components (SSCs) and lifelines that suffered damage are similar to those found in nuclear power plants and in USDOE facilities. Lessons learned from these experiences can have some applicability at commercial nuclear power plants

  5. LESSONS LEARNED IN TESTING OF SAFEGUARDS EQUIPMENT

    International Nuclear Information System (INIS)

    Pepper, S.; Farnitano, M.; Carelli, J.; Hazeltine, J.; Bailey, D.

    2001-01-01

    The International Atomic Energy Agency's (IAEA) Department of Safeguards uses complex instrumentation for the application of safeguards at nuclear facilities around the world. Often, this equipment is developed through cooperation with member state support programs because the Agency's requirements are unique and are not met by commercially available equipment. Before approving an instrument or system for routine inspection use, the IAEA subjects it to a series of tests designed to evaluate its reliability. In 2000, the IAEA began to observe operational failures in digital surveillance systems. In response to the observed failures, the IAEA worked with the equipment designer and manufacturer to determine the cause of failure. An action plan was developed to correct the performance issues and further test the systems to make sure that additional operational issues would not surface later. This paper addresses the steps taken to address operation issues related to digital image surveillance systems and the lessons learned during this process

  6. Feedback of safety - related operational experience: Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Elias, D [Commonwealth Edison Co. (United States)

    1997-09-01

    The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues.

  7. Feedback of safety - related operational experience: Lessons learned

    International Nuclear Information System (INIS)

    Elias, D.

    1997-01-01

    The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues

  8. The application of micro-lesson in optics teaching

    Science.gov (United States)

    Yuan, Suzhen; Mao, Xuefeng; Lu, Yongle; Wang, Yan; Luo, Yuan

    2017-08-01

    In order to improve students' ability on self-study, this paper discusses the application of micro-lesson as a supplementary way in the course of optics teaching. Both geometric optics and wave optics require a lot of demos, fortunately, micro-lesson just meets this requirement. Nowadays, college education focuses on quality education, so the new nurture scheme of most universities shortened the class hours. However, the development of students and the social needs also require students to have a solid foundation. The effective way to solve this contradiction is to improve the efficiency of classroom teaching and provide the repeatable learning form, micro-lesson.

  9. Lessons learned from early criticality accidents

    International Nuclear Information System (INIS)

    Malenfant, R.E.

    1996-01-01

    Four accidents involving the approach to criticality occurred during the period July, 1945, through May, 1996. These have been described in the format of the OPERATING EXPERIENCE WEEKLY SUMMARY which is distributed by the Office of Nuclear and Facility Safety. Although the lessons learned have been incorporated in standards, codes, and formal procedures during the last fifty years, this is their first presentation in this format. It is particularly appropriate that they be presented in the forum of the Nuclear Criticality Technology Safety Project Workshop closest to the fiftieth anniversary of the last of the four accidents, and that which was most instrumental in demonstrating the need to incorporate lessons learned

  10. Lessons Learned In Developing The VACIS Products

    International Nuclear Information System (INIS)

    Orphan, Victor J.

    2011-01-01

    SAIC's development of VACIS provides useful 'lessons learned' in bridging the gap from an idea to a security or contraband detection product. From a gamma densitometer idea for solving a specific Customs Service (CS) requirement (detection of drugs in near-empty tanker trucks) in mid-1990's, SAIC developed a broad line of vehicle and cargo inspections systems (over 500 systems deployed to date) based on a gamma-ray radiographic imaging technique. This paper analyzes the reasons for the successful development of VACIS and attempts to identify ''lessons learned'' useful for future security and contraband detection product developments.

  11. Lessons learned in CMAM implementation

    International Nuclear Information System (INIS)

    Dent, Nicky; Brown, Rebecca

    2014-01-01

    -going. Despite the need to adapt protocols and approaches to each specific context, there is a need for a common research agenda and sharing of what works and does not. Concerted efforts have been made to improve information-sharing and to draw on lessons learned to advance technical and organisational challenges. However many health workers have limited access to quality information due to barriers such as internet access and language. For example, one recent initiative identified less than 10% of resources are available in French, despite high caseloads of acute malnutrition in francophone West Africa. Key actions to address challenges in information-sharing include: -Improve availability of and access to translated information -Increase use of social media, e-learning and audio-visual materials for extended reach and use of information -Stimulate interactive dialogue and sharing between practitioners for improved problem solving and learning -Strengthen the collaboration between complementary initiatives. In one decade significant advances in the adaptation and implementation of community-based management of acute malnutrition approach have been made in various contexts, but challenges to quality service delivery, scale-up and sustainability remain. It is time to draw on what we know to support scale-up and have equitable access to treatment to the millions of children who still remain outside of existing services. (author)

  12. Lessons learned from failure analysis

    International Nuclear Information System (INIS)

    Le May, I.

    2006-01-01

    Failure analysis can be a very useful tool to designers and operators of plant and equipment. It is not simply something that is done for lawyers and insurance companies, but is a tool from which lessons can be learned and by means of which the 'breed' can be improved. In this presentation, several failure investigations that have contributed to understanding will be presented. Specifically, the following cases will be discussed: 1) A fire at a refinery that occurred in a desulphurization unit. 2) The failure of a pipeline before it was even put into operation. 3) Failures in locomotive axles that took place during winter operation. The refinery fire was initially blamed on defective Type 321 seamless stainless steel tubing, but there were conflicting views between 'experts' involved as to the mechanism of failure and the writer was called upon to make an in-depth study. This showed that there were a variety of failure mechanism involved, including high temperature fracture, environmentally-induced cracking and possible manufacturing defects. The unraveling of the failure sequence is described and illustrated. The failure of an oil transmission was discovered when the line was pressure tested some months after it had been installed and before it was put into service. Repairs were made and failure occurred in another place upon the next pressure test being conducted. After several more repairs had been made the line was abandoned and a lawsuit was commenced on the basis that the steel was defective. An investigation disclosed that the material was sensitive to embrittlement and the causes of this were determined. As a result, changes were made in the microstructural control of the product to avoid similar problems in future. A series of axle failures occurred in diesel electric locomotives during winter. An investigation was made to determine the nature of the failures which were not by classical fatigue, nor did they correspond to published illustrations of Cu

  13. The Role of a Commander in Military Lessons Learned Systems

    Directory of Open Access Journals (Sweden)

    Zenon Waliński

    2015-06-01

    Full Text Available The aim of the paper is to investigate the role of a commander in military Lessons Learned systems. In order to achieve the aim, the paper presents (1 the architecture of the Lessons Learned capabilities in the U.S. Army, NATO and the Polish Armed Forces, (2 the commander’s role in the Lessons Learned process (3 the commander’s role in fostering Lessons Learned organisation culture. The paper is based on multiple case study analysis including Lessons Learned systems in NATO, the U.S. Army and the Polish Armed Forces.

  14. Lessons learned from the NREL village power program

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, R.W. [National Renewable Energy Lab., Golden, CO (United States)

    1998-09-01

    Renewable energy solutions for village power applications can be economical, functional, and sustainable. Pilot projects are an appropriate step in the development of a commercially viable market for rural renewable energy solutions. Moreover, there are a significant number of rural electrification projects under way that employ various technologies, delivery mechanisms, and financing arrangements. These projects, if properly evaluated, communicated, and their lessons incorporated in future projects and programs, can lead the way to a future that includes a robust opportunity for cost-effective, renewable-based village power systems. This paper summarizes some of NREL`s recent experiences and lessons learned.

  15. Lessons Learned from the NREL Village Power Program

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, R.

    1998-07-01

    Renewable energy solutions for village power applications can be economical, functional, and sustainable. Pilot projects are an appropriate step in the development of a commercially viable market for rural renewable energy solutions. Moreover, there are a significant number of rural electrification projects under way that employ various technologies, delivery mechanisms, and financing arrangements. These projects, if properly evaluated, communicated, and their lessons incorporated in future projects and programs, can lead the way to a future that includes a robust opportunity for cost-effective, renewable-based village power systems. This paper summarizes some of NRELs recent experiences and lessons learned.

  16. Lessons learned on digital systems safety

    International Nuclear Information System (INIS)

    Sivertsen, Terje

    2005-06-01

    A decade ago, in 1994, lessons learned from Halden research activities on digital systems safety were summarized in the reports HWR-374 and HWR-375, under the title 'A Lessons Learned Report on Software Dependability'. The reports reviewed all activities made at the Halden Project in this field since 1977. As such, the reports provide a wealth of information on Halden research. At the same time, the lessons learned from the different activities are made more accessible to the reader by being summarized in terms of results, conclusions and recommendations. The present report provides a new lessons learned report, covering the Halden Project research activities in this area from 1994 to medio 2005. As before, the emphasis is on the results, conclusions and recommendations made from these activities, in particular how they can be utilized by different types of organisations, such as licensing authorities, safety assessors, power companies, and software developers. The contents of the report have been edited on the basis of input from a large number of Halden work reports, involving many different authors. Brief summaries of these reports are included in the last part of the report. (Author)

  17. Two Approaches to Distance Education: Lessons Learned.

    Science.gov (United States)

    Sedlak, Robert A.; Cartwright, G. Phillip

    1997-01-01

    Outlines lessons learned by the University of Wisconsin-Stout in implementing two distance education programs, a technology program using interactive television and a hospitality program using Lotus Notes to deliver courses. Topics discussed include program concept vs. technology as stimulus for innovation, program planning/administration,…

  18. Lessons Learned from the Private Sector

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, Robert J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    This session is focused on lessons learned from private sector energy projects that could be applied to the federal sector. This presentation tees up the subsequent presentations by outlining the differences between private and federal sectors in objectives, metrics for determining success, funding resources/mechanisms, payback and ROI evaluation, risk tolerance/aversion, new technology adoption perspectives, and contracting mechanisms.

  19. Commissioning MMS: Challenges and Lessons Learned

    Science.gov (United States)

    Wood, Paul; Gramling, Cheryl; Reiter, Jennifer; Smith, Patrick; Stone, John

    2016-01-01

    This paper discusses commissioning of NASA's Magnetospheric MultiScale (MMS) Mission. The mission includes four identical spacecraft with a large, complex set of instrumentation. The planning for and execution of commissioning for this mission is described. The paper concludes by discussing lessons learned.

  20. Library 101: Why, How, and Lessons Learned

    Science.gov (United States)

    Porter, Michael; King, David Lee

    2010-01-01

    This article describes how and why the Library 101 Project was created and the lessons that the developers learned out of this project. The Library 101 is a project that challenges librarians to revise the paradigm of "basic" library services in order to remain relevant in this technology-driven world. It was developed by Michael Porter,…

  1. Improving IT Project Portfolio Management: Lessons Learned

    DEFF Research Database (Denmark)

    Pedersen, Keld

    2013-01-01

    The IT PPM improvement process is not well understood, and our knowledge about what makes IT PPM improvement succeed or fail is not well developed. This article presents lessons learned from organizations trying to improve their IT PPM practice. Based on this research IT PPM practitioners are adv...

  2. Lessons learned from existing biomass power plants

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.

    2000-02-24

    This report includes summary information on 20 biomass power plants, which represent some of the leaders in the industry. In each category an effort is made to identify plants that illustrate particular points. The project experiences described capture some important lessons learned that lead in the direction of an improved biomass power industry.

  3. Lessons learned in NEPA public involvement

    International Nuclear Information System (INIS)

    Stevens, A.D.; Glore, D.M.

    1995-01-01

    'In recent years Uncle Sam has been asking citizens for their help in improving the environment. The government is learning that with public input it can better prioritize environmental problems and more effectively direct limited funding.' The National Environmental Policy Act (NEPA), like many other government regulations, is a 'living law.' Although there are agency and Council guidelines, it is practical application, based on past practices and case law that refines the Act's broad concepts. The specifics of how to meet requirements are constantly being honed and melded to fit the unique situational needs of an agency, a project, or a public. This fluidity presents a challenge for stakeholder involvement activities. Communication practioners and project managers may have room for creativity and customized approaches, but they also find less than clear direction on what it takes to successfully avoid challenges of non-compliance. Because of the continuing uncertainty on how to involve the public meaningfully, it is vital to share important lessons learned from NEPA projects. The following practical suggestions are derived primarily from experiences with the Department of Energy's first ever complex-wide and site-specific environmental impact statement (EIS)-the Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs EIS (SNF ampersand INEL EIS)

  4. The Joint Lessons Learned System and Interoperability

    Science.gov (United States)

    1989-06-02

    Learned: 1988-1989 As mentioned in the introduction to this chaoter, the Organizacion of the JcinC Chiefs cf Staff .OJCS) ueren significant transformatioi...Organization and Functions Manual . Washington, D.C.: HQDA, Office of the Deputy Chief 0f Staff for Operations and Plans, June 1984. ’..S. Army. Concept...U.S. Department of Defense. Joint Universal Lessons Learned System (JULLS) User’s Manual . Orlando, Florida: University of Central Florida, Institute

  5. Application of Commercial Games for Home-Based Rehabilitation for People with Hemiparesis: Challenges and Lessons Learned.

    Science.gov (United States)

    Valdés, Bulmaro A; Glegg, Stephanie M N; Lambert-Shirzad, Navid; Schneider, Andrea N; Marr, Jonathan; Bernard, Renee; Lohse, Keith; Hoens, Alison M; Van der Loos, H F Machiel

    2018-06-01

    To identify the factors that influence the use of an at-home virtual rehabilitation gaming system from the perspective of therapists, engineers, and adults and adolescents with hemiparesis secondary to stroke, brain injury, and cerebral palsy. This study reports on qualitative findings from a study, involving seven adults (two female; mean age: 65 ± 8 years) and three adolescents (one female; mean age: 15 ± 2 years) with hemiparesis, evaluating the feasibility and clinical effectiveness of a home-based custom-designed virtual rehabilitation system over 2 months. Thematic analysis was used to analyze qualitative data from therapists' weekly telephone interview notes, research team documentation regarding issues raised during technical support interactions, and the transcript of a poststudy debriefing session involving research team members and collaborators. Qualitative themes that emerged suggested that system use was associated with three key factors as follows: (1) the technology itself (e.g., characteristics of the games and their clinical implications, system accessibility, and hardware and software design); (2) communication processes (e.g., preferences and effectiveness of methods used during the study); and (3) knowledge and training of participants and therapists on the technology's use (e.g., familiarity with Facebook, time required to gain competence with the system, and need for clinical observations during remote therapy). Strategies to address these factors are proposed. Lessons learned from this study can inform future clinical and implementation research using commercial videogames and social media platforms. The capacity to track compensatory movements, clinical considerations in game selection, the provision of kinematic and treatment progress reports to participants, and effective communication and training for therapists and participants may enhance research success, system usability, and adoption.

  6. Application of Incident Command Structure to clinical trial management in the academic setting: principles and lessons learned.

    Science.gov (United States)

    Reynolds, Penny S; Michael, Mary J; Spiess, Bruce D

    2017-02-09

    Clinical trial success depends on appropriate management, but practical guidance to trial organisation and planning is lacking. The Incident Command System (ICS) is the 'gold standard' management system developed for managing diverse operations in major incident and public health arenas. It enables effective and flexible management through integration of personnel, procedures, resources, and communications within a common hierarchical organisational structure. Conventional ICS organisation consists of five function modules: Command, Planning, Operations, Logistics, and Finance/Administration. Large clinical trials will require a separate Regulatory Administrative arm, and an Information arm, consisting of dedicated data management and information technology staff. We applied ICS principles to organisation and management of the Prehospital Use of Plasma in Traumatic Haemorrhage (PUPTH) trial. This trial was a multidepartmental, multiagency, randomised clinical trial investigating prehospital administration of thawed plasma on mortality and coagulation response in severely injured trauma patients. We describe the ICS system as it would apply to large clinical trials in general, and the benefits, barriers, and lessons learned in utilising ICS principles to reorganise and coordinate the PUPTH trial. Without a formal trial management structure, early stages of the trial were characterised by inertia and organisational confusion. Implementing ICS improved organisation, coordination, and communication between multiple agencies and service groups, and greatly streamlined regulatory compliance administration. However, unfamiliarity of clinicians with ICS culture, conflicting resource allocation priorities, and communication bottlenecks were significant barriers. ICS is a flexible and powerful organisational tool for managing large complex clinical trials. However, for successful implementation the cultural, psychological, and social environment of trial participants must be

  7. Lessons learned from accidental exposures in radiotherapy

    International Nuclear Information System (INIS)

    2000-01-01

    The medical use of radiation is unique in that patients are intentionally exposed to radiation. The aim in radiation therapy is twofold: to deliver a dose and dose distribution that is adequate for tumour control, but which also minimizes complications in normal tissues. In therapeutic applications, the doses are high and a deviation from the prescribed dose may have severe or even fatal consequences. There is therefore a great need to ensure adequate radiation protection and safety in radiotherapy by verifying that all personnel involved are appropriately trained for their duties, that the equipment used meets relevant international specifications for radiation safety and that safety culture is embedded in routine activities in radiotherapy departments. Many individuals must interact and work together on highly technical measurements and calculations, and therefore the potential for mistakes is great. A review of the mistakes shows that most are due to human error. The International Basic Safety Standards for Protection against Ionizing Radiation and the Safety of Radiation Sources (IAEA Safety Series No. 115) require that a prompt investigation be conducted whenever an accidental medical exposure of patients occurs. The report of the investigation is to be disseminated to the appropriate parties so that lessons can be learned to prevent similar accidents or mitigate their consequences in the future. This Safety Report is a collection of a large number of events that may serve as a checklist against which to test the vulnerability of a facility to potential accidents, and to provide a basis for improving safety in the use of radiation in medical applications. A further purpose of this report is to encourage readers to develop a questioning and learning attitude, adopt measures for the prevention of accidents, and prepare for mitigation of the consequences of accidents if they occur

  8. Lessons learned from solar energy projects in Saudi Arabia

    International Nuclear Information System (INIS)

    Huraib, F.S.; Hasnain, S.M.; Alawaji, S.H.

    1996-01-01

    This paper describes the lessons learned from the major RD and D activities at Energy Research Institute (ERI), King Abdulaziz City for Science and Technology (KACST) in the field of solar energy. Photovoltaic, solar thermal dishes, solar water heating, solar water pumping and desalination, solar hydrogen production and utilization are some of the areas studied for solar energy applications. Recommendations and guidelines for future solar energy research, development, demonstration and dissemination in Saudi Arabia are also given. (Author)

  9. Calibration Lessons Learned from Hyperion Experience

    Science.gov (United States)

    Casement, S.; Ho, K.; Sandor-Leahy, S.; Biggar, S.; Czapla-Myers, J.; McCorkel, J.; Thome, K.

    2009-12-01

    The use of hyperspectral imagers to provide climate-quality data sets, such as those expected from the solar reflective sensor on the Climate Absolute Radiance and Refractivity Observatory (CLARREO), requires stringent radiometric calibration requirements. These stringent requirements have been nearly met with broadband radiometers such as CERES, but high resolution spectrometers pose additional challenges. A review of the calibration processes for past space-based HSIs provide guidance on the calibration processes that will be needed for future sensors. In November 2000, the Earth Observer-1 (EO-1) platform was launched onboard a Boeing Delta II launch vehicle. The primary purpose of the EO-1 mission was to provide a technological testbed for spaceborne components. The platform has three sensors onboard, of which, the hyperspectral imager (HSI) Hyperion, is discussed here. The Hyperion sensor at the time had no comparable sensor in earth orbit, being the first grating-based, hyperspectral, civilian sensor in earth orbit. Ground and on-orbit calibration procedures including all cross-calibration activities have achieved an estimated instrument absolute radiometric error of 2.9% in the Visible channel (0.4 - 1.0 microns) and 3.4% in the shortwave infrared (SWIR, 0.9 - 2.5 microns) channel (EO-1/Hyperion Early Orbit Checkout Report Part II On-Orbit Performance Verification and Calibration). This paper describes the key components of the Hyperion calibration process that are applicable to future HSI missions. The pre-launch methods relied on then newly-developed, detector-based methods. Subsequent vicarious methods including cross-calibration with other sensors and the reflectance-based method showed significant differences from the prelaunch calibration. Such a difference demonstrated the importance of the vicarious methods as well as pointing to areas for improvement in the prelaunch methods. We also identify areas where lessons learned from Hyperion regarding

  10. Social Media and Seamless Learning: Lessons Learned

    Science.gov (United States)

    Panke, Stefanie; Kohls, Christian; Gaiser, Birgit

    2017-01-01

    The paper discusses best practice approaches and metrics for evaluation that support seamless learning with social media. We draw upon the theoretical frameworks of social learning theory, transfer learning (bricolage), and educational design patterns to elaborate upon different ideas for ways in which social media can support seamless learning.…

  11. Sharing Lessons Learned Between Industries in EU

    International Nuclear Information System (INIS)

    Muehleisen, A.; Strucic, M.

    2012-01-01

    Recent events in nuclear industry remind us on importance of continuous sharing of the knowledge and experience gained through evaluations of incidents and accidents. We frequently use experience from our daily life activities to improve our performance and avoid some mistakes or unwanted events. In the similar way we can use other industries experience. These experiences can be applied to improve nuclear safety. For example, Safety Culture, which has a great influence on the level of nuclear power plants safety, is similarly presented in other industries. Mechanisms which led to accidents from weak safety culture in one branch of other industry could be comparable to those in nuclear industry. Some other industries have many more cumulative years of experience than nuclear industry. Aviation and Oil industries are typical representatives. Part of their experience can be used in nuclear industry too. Number of reports from nuclear power plants showed us that not only specific equipment related causes lay behind accidents; there are also other causes and contributors which are more common for all industries. Hence lessons learned in other industry should be assessed and used in nuclear industry too. In the European Union, a regional initiative has been set up in 2008 in support of EU Member State nuclear safety authorities, but also EU technical support organizations, international organizations and the broader nuclear community, to enhance nuclear safety through improvement of the use of lessons learned from operational experience of nuclear power plants (NPPs). The initiative, called ''the EU Clearinghouse on Operational Experience Feedback for NPP'', is organized as a network operated by a centralized office located at the Joint Research Centre of the European Commission. The reduction of occurrence and significance of events in NPPs and their safe operation is its ultimate goal. Among others EU Clearinghouse provides services such as technical and scientific

  12. TMI-2 lessons have been learned

    International Nuclear Information System (INIS)

    Long, R.L.

    1994-01-01

    This paper is an introduction to the more detailed papers which are presented in this session titled ''Advanced Light Water Reactors -- 15 Years After TMI.'' Many of the advances in the design, operation and maintenance of nuclear power plants are the direct result of applying lessons learned from the 1979 TMI-2 accident. The authors believe the ''reality awakening'' which occurred following the accident should never be forgotten. Thus, this paper briefly reviews the TMI-2 accident and identifies the broad lessons learned following the accident. Then it describes briefly some indicators which show the very impressive improvements in nuclear power plant performance that have occurred over the past 10-15 years. This sets the stage for Dr. Ransom's paper which shows the continuing need for nuclear power, Dr. Beckjord's paper which describes the ''final'' TMI-2 research project and the subsequent papers which focus on advanced light water reactor developments

  13. CAT/RF Simulation Lessons Learned

    Science.gov (United States)

    2003-06-11

    IVSS-2003-MAS-7 CAT /RF Simulation Lessons Learned Christopher Mocnik Vetronics Technology Area, RDECOM TARDEC Tim Lee DCS Corporation...developed a re- configurable Unmanned Ground Vehicle (UGV) simulation for the Crew integration and Automation Test bed ( CAT ) and Robotics Follower (RF...Advanced Technology Demonstration (ATD) experiments. This simulation was developed as a component of the Embedded Simulation System (ESS) of the CAT

  14. Job Oriented Training ’Lessons Learned

    Science.gov (United States)

    2008-11-01

    Job Oriented Training ’Lessons Learned’ Job Oriented Training (JOT), een vorm van trainen waarbij de cursist zelfstandig, zonder theorie vooraf...39 77 lnfo-DenV@tno.nl TNO-rapportnummer TNO-DV 2008 A447 Opdrachtnummer Datum november 2008 Auteur (s) drs. H.E. Stubbe dr. A.H. van der...onderlinge discussie over achterliggende overwegingen te stimuleren. Zij hebben op dat moment nog geen theorie aangeboden gekregen en zijn niet op de hoogte

  15. Lessons learned in applying function analysis

    International Nuclear Information System (INIS)

    Mitchel, G.R.; Davey, E.; Basso, R.

    2001-01-01

    This paper summarizes the lessons learned in undertaking and applying function analysis based on the recent experience of utility, AECL and international design and assessment projects. Function analysis is an analytical technique that can be used to characterize and asses the functions of a system and is widely recognized as an essential component of a 'systematic' approach to design, on that integrated operational and user requirements into the standard design process. (author)

  16. Lessons learned from Spain's nuclear program

    International Nuclear Information System (INIS)

    Garcia Rodriguez, A.

    1993-01-01

    The commercial nuclear program in Spain dates back to the beginning of the 1960s. There are currently nine units in operation, one more has been decommissioned and a further five are in different phases of construction but under nuclear moratorium since 1983. This article gives a general overview of the program, the criteria applied, what it has meant to and required of the industry and, finally, what lessons have been learned. (author) 2 figs

  17. Organizational safety factors research lessons learned

    International Nuclear Information System (INIS)

    Ryan, T.G.

    1995-01-01

    This Paper reports lessons learned and state of knowledge gained from an organizational factors research activity involving commercial nuclear power plants in the United States, through the end of 1991, as seen by the scientists immediately involved in the research. Lessons learned information was gathered from the research teams and individuals using a question and answer format. The following five questions were submitted to each team and individual: (1) What organizational factors appear to influence safety performance in some systematic way, (2) Should organizational factors research focus at the plant level, or should it extend beyond the plant level to the parent company, rate setting commissions, regulatory agencies, (3) How important is having direct access to plants for doing organizational factors research, (4) What lessons have been learned to date as the result of doing organizational factors research in a nuclear regulatory setting, and (5) What organizational research topics and issues should be pursued in the future? Conclusions based on the responses provided for this report are that organizational factors research can be conducted in a regulatory setting and produce useful results. Technologies pioneered in other academic, commercial, and military settings can be adopted for use in a nuclear regulatory setting. The future success of such research depends upon the cooperation of regulators, contractors, and the nuclear industry

  18. MODIS Science Algorithms and Data Systems Lessons Learned

    Science.gov (United States)

    Wolfe, Robert E.; Ridgway, Bill L.; Patt, Fred S.; Masuoka, Edward J.

    2009-01-01

    For almost 10 years, standard global products from NASA's Earth Observing System s (EOS) two Moderate Resolution Imaging Spectroradiometer (MODIS) sensors are being used world-wide for earth science research and applications. This paper discusses the lessons learned in developing the science algorithms and the data systems needed to produce these high quality data products for the earth sciences community. Strong science team leadership and communication, an evolvable and scalable data system, and central coordination of QA and validation activities enabled the data system to grow by two orders of magnitude from the initial at-launch system to the current system able to reprocess data from both the Terra and Aqua missions in less than a year. Many of the lessons learned from MODIS are already being applied to follow-on missions.

  19. Lessons Learned from Developing SAWA: A Situation Awareness Assistant

    National Research Council Canada - National Science Library

    Matheus, Christopher J; Kokar, Mieczyslaw M; Letkowski, Jerzy J; Call, Catherine; Baclawski, Kenneth; Hinman, Michael; Salerno, John; Boulware, Douglas

    2005-01-01

    .... During the process of its development several lessons were learned about advantages and limitations of certain approaches, techniques and technologies as they are applied to situation awareness...

  20. Dynasting Theory: Lessons in learning grounded theory

    Directory of Open Access Journals (Sweden)

    Johnben Teik-Cheok Loy, MBA, MTS, Ph.D.

    2011-06-01

    Full Text Available This article captures the key learning lessons gleaned from the author’s experience learning and developing a grounded theory for his doctoral dissertation using the classic methodology as conceived by Barney Glaser. The theory was developed through data gathered on founders and successors of Malaysian Chinese family-own businesses. The main concern for Malaysian Chinese family businesses emerged as dynasting . the building, maintaining, and growing the power and resources of the business within the family lineage. The core category emerged as dynasting across cultures, where founders and successors struggle to transition from traditional Chinese to hybrid cultural and modernized forms of family business from one generation to the next. The key learning lessons were categorized under five headings: (a sorting through different versions of grounded theory, (b educating and managing research stakeholders, (c embracing experiential learning, (d discovering the core category: grounded intuition, and (e recognizing limitations and possibilities.Keywords: grounded theory, learning, dynasting, family business, Chinese

  1. Bit of History and Some Lessons Learned in Using NASA Remote Sensing Data in Public Health Applications

    Science.gov (United States)

    Quattrochi, Dale A.; Estes, Sue

    2011-01-01

    The NASA Applied Sciences Program's public health initiative began in 2004 to illustratethe potential benefits for using remote sensing in public health applications. Objectives/Purpose: The CDC initiated a st udy with NASA through the National Center for Environmental Health (NCEH) to establish a pilot effort to use remote sensing data as part of its Environmental Public Health Tracking Network (EPHTN). As a consequence, the NCEH and NASA developed a project called HELIX-Atlanta (Health and Environment Linkage for Information Exchange) to demonstrate a process for developing a local environmental public health tracking and surveillance network that integrates non-infectious health and environment systems for the Atlanta metropolitan area. Methods: As an ongo ing, systematic integration, analysis and interpretation of data, an EPHTN focuses on: 1 -- environmental hazards; 2 -- human exposure to environmental hazards; and 3 -- health effects potentially related to exposure to environmental hazards. To satisfy the definition of a surveillance system the data must be disseminated to plan, implement, and evaluate environmental public health action. Results: A close working r elationship developed with NCEH where information was exchanged to assist in the development of an EPHTN that incorporated NASA remote sensing data into a surveillance network for disseminating public health tracking information to users. This project?s success provided NASA with the opportunity to work with other public health entities such as the University of Mississippi Medical Center, the University of New Mexico and the University of Arizona. Conclusions: HELIX-Atlanta became a functioning part of the national EPHTN for tracking environmental hazards and exposure, particularly as related to air quality over Atlanta. Learning Objectives: 1 -- remote sensing data can be integral to an EPHTN; 2 -- public tracking objectives can be enhanced through remote sensing data; 3 -- NASA's involvement in

  2. Lessons learned from the licensing process and the operational performance of the important to safety digital application implemented at the Mexican nuclear facilities

    International Nuclear Information System (INIS)

    Ledesma-Carrion, R.

    1998-01-01

    This paper describes the main concerns detected during the licensing processes performed by the Mexican Nuclear Regulatory Commission (CNSNS) for the NUMAC-PRNM, the Integrated Computer Systems at the Laguna Verde Nuclear Power Station (LVNPS) and for the Digital Control Console of the Triga Mark III Research Reactor (TMRR). The review and approval process was performed following the guidelines of the US Nuclear Regulatory Commission (USNRC); the regulatory frame applied includes the Code of Federal Regulation (10CFR50), some Regulatory Guides, such as: RG 1.152, RG 1.153, some Industrial Standards, for example: IEEE-279, IEEE-603, IEEE-7.4.3-2. Also, based on the operational experience taken from the LVNPS License Event Report (LER) reported under the 10CFR50.72 and 10CFR50.73 USNRC rules, and from the Report of Events to be Analyzed (REA) issued for a CNSNS agreement with the utility stated by the necessity to determine failure rates of digital equipment, some case studies and a preliminary failure cause classification is shown. The Event Report evaluation covered topics related to the software, hardware and firmware issues. Finally, the lessons learned from the licensing assessments and from the operational experience of the digital applications implemented are presented. It will also give the regulatory activities related to an IAEA international cooperation project on I and C digital upgrade concerns. (author)

  3. Rock slopes and reservoirs - lessons learned

    International Nuclear Information System (INIS)

    Moore, D.P.

    1999-01-01

    Lessons learned about slope stability in the course of four decades of monitoring, and in some cases stabilizing, slopes along British Columbia's hydroelectric reservoirs are discussed. The lessons are illustrated by short case histories of some of the more important slopes such as Little Chief Slide, Dutchman's Ridge, Downie Slide, Checkerboard Creek and Wahleach. Information derived from the monitoring and other investigations are compared with early interpretations of geology and slope performance. The comparison serves as an indicator of progress in slope stability determination and as a measure of the value of accumulated experience in terms of the potential consequences to safety and cost savings over the long life-span of hydroelectric projects.14 refs., 2 tabs., 15 figs

  4. Scheduling lessons learned from the Autonomous Power System

    Science.gov (United States)

    Ringer, Mark J.

    1992-01-01

    The Autonomous Power System (APS) project at NASA LeRC is designed to demonstrate the applications of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution systems. The project consists of three elements: the Autonomous Power Expert System (APEX) for Fault Diagnosis, Isolation, and Recovery (FDIR); the Autonomous Intelligent Power Scheduler (AIPS) to efficiently assign activities start times and resources; and power hardware (Brassboard) to emulate a space-based power system. The AIPS scheduler was tested within the APS system. This scheduler is able to efficiently assign available power to the requesting activities and share this information with other software agents within the APS system in order to implement the generated schedule. The AIPS scheduler is also able to cooperatively recover from fault situations by rescheduling the affected loads on the Brassboard in conjunction with the APEX FDIR system. AIPS served as a learning tool and an initial scheduling testbed for the integration of FDIR and automated scheduling systems. Many lessons were learned from the AIPS scheduler and are now being integrated into a new scheduler called SCRAP (Scheduler for Continuous Resource Allocation and Planning). This paper will service three purposes: an overview of the AIPS implementation, lessons learned from the AIPS scheduler, and a brief section on how these lessons are being applied to the new SCRAP scheduler.

  5. Integrated Programme Control Systems: Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Brown, C. W. [Babcock International Group PLC (formerly UKAEA Ltd) B21 Forss, Thurso, Caithness, Scotland (United Kingdom)

    2013-08-15

    Dounreay was the UK's centre of fast reactor research and development from 1955 until 1994 and is now Scotland's largest nuclear clean up and demolition project. After four decades of research, Dounreay is now a site of construction, demolition and waste management, designed to return the site to as near as practicable to its original condition. Dounreay has a turnover in the region of Pounds 150 million a year and employs approximately 900 people. It subcontracts work to 50 or so companies in the supply chain and this provides employment for a similar number of people. The plan for decommissioning the site anticipates all redundant buildings will be cleared in the short term. The target date to achieve interim end state by 2039 is being reviewed in light of Government funding constraints, and will be subject to change through the NDA led site management competition. In the longer term, controls will be put in place on the use of contaminated land until 2300. In supporting the planning, management and organisational aspects for this complex decommissioning programme an integrated programme controls system has been developed and deployed. This consists of a combination of commercial and bespoke tools integrated to support all aspects of programme management, namely scope, schedule, cost, estimating and risk in order to provide baseline and performance management data based upon the application of earned value management principles. Through system evolution and lessons learned, the main benefits of this approach are management data consistency, rapid communication of live information, and increased granularity of data providing summary and detailed reports which identify performance trends that lead to corrective actions. The challenges of such approach are effective use of the information to realise positive changes, balancing the annual system support and development costs against the business needs, and maximising system performance. (author)

  6. Designing a database for performance assessment: Lessons learned from WIPP

    International Nuclear Information System (INIS)

    Martell, M.A.; Schenker, A.

    1997-01-01

    The Waste Isolation Pilot Plant (WIPP) Compliance Certification Application (CCA) Performance Assessment (PA) used a relational database that was originally designed only to supply the input parameters required for implementation of the PA codes. Reviewers used the database as a point of entry to audit quality assurance measures for control, traceability, and retrievability of input information used for analysis, and output/work products. During these audits it became apparent that modifications to the architecture and scope of the database would benefit the EPA regulator and other stakeholders when reviewing the recertification application. This paper contains a discussion of the WPP PA CCA database and lessons learned for designing a database

  7. Lessons learned from AU PSO-missions in Africa

    DEFF Research Database (Denmark)

    Mandrup, Thomas

    The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO.......The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO....

  8. Lessons learned from MONJU sodium leak accident

    International Nuclear Information System (INIS)

    Nakai, Ryodai; Ito, Kazumoto; Nagata, Takashi

    2000-01-01

    MONJU sodium leak accident was a small accident with a large public impact. There was no injures or exposure to radiation, nor was there any loss of safety function such as reactor shutdown or reactor cooling. On the contrary a social impact is considerably large, whereby the plant remains shutdown. This paper describes the lessons learned from the accident, i.e. the impact of the accident and its cause, and the features on risk management in view of social aspect as well as technical aspect. (author)

  9. The Fernald Closure Project: Lessons Learned

    International Nuclear Information System (INIS)

    Murphy, Cornelius M.; Carr, Dennis

    2008-01-01

    For nearly 37 years, the U.S. Department of Energy site at Fernald - near Cincinnati, Ohio - produced 230,000 metric tons (250,000 short tons) of high-purity, low-enriched uranium for the U.S. Defense Program, generating more than 5.4 million metric tons (6 million short tons) of liquid and solid waste as it carried out its Cold War mission. The facility was shut down in 1989 and clean up began in 1992, when Fluor won the contract to clean up the site. Cleaning up Fernald and returning it to the people of Ohio was a $4.4 billion mega environmental-remediation project that was completed in October 2006. Project evolved through four phases: - Conducting remedial-investigation studies to determine the extent of damage to the environment and groundwater at, and adjacent to, the production facilities; - Selecting cleanup criteria - final end states that had to be met that protect human health and the environment; - Selecting and implementing the remedial actions to meet the cleanup goals; - Executing the work in a safe, compliant and cost-effective manner. In the early stages of the project, there were strained relationships - in fact total distrust - between the local community and the DOE as a result of aquifer contamination and potential health effects to the workers and local residents. To engage citizens and interested stakeholders groups in the decision-making process, the DOE and Fluor developed a public-participation strategy to open the channels of communication with the various parties: site leadership, technical staff and regulators. This approach proved invaluable to the success of the project, which has become a model for future environmental remediation projects. This paper will summarize the history and shares lessons learned: the completion of the uranium-production mission to the implementation of the Records of Decision defining the cleanup standards and the remedies achieved. Lessons learned fall into ten categories: - Regulatory approach with end

  10. Lessons Learned from Ares I Upper Stage Structures and Thermal Design

    Science.gov (United States)

    Ahmed, Rafiq

    2012-01-01

    The Ares 1 Upper Stage was part of the vehicle intended to succeed the Space Shuttle as the United States manned spaceflight vehicle. Although the Upper Stage project was cancelled, there were many lessons learned that are applicable to future vehicle design. Lessons learned that are briefly detailed in this Technical Memorandum are for specific technical areas such as tank design, common bulkhead design, thrust oscillation, control of flight and slosh loads, purge and hazardous gas system. In addition, lessons learned from a systems engineering and vehicle integration perspective are also included, such as computer aided design and engineering, scheduling, and data management. The need for detailed systems engineering in the early stages of a project is emphasized throughout this report. The intent is that future projects will be able to apply these lessons learned to keep costs down, schedules brief, and deliver products that perform to the expectations of their customers.

  11. Lessons learned from cloning dogs.

    Science.gov (United States)

    Kim, M J; Oh, H J; Kim, G A; Park, J E; Park, E J; Jang, G; Ra, J C; Kang, S K; Lee, B C

    2012-08-01

    The aim of this article is to review dog cloning research and to suggest its applications based on a discussion about the normality of cloned dogs. Somatic cell nuclear transfer was successfully used for production of viable cloned puppies despite limited understanding of in vitro dog embryo production. Cloned dogs have similar growth characteristics to those born from natural fertilization, with no evidence of serious adverse effects. The offspring of cloned dogs also have similar growth performance and health to those of naturally bred puppies. Therefore, cloning in domestic dogs can be applied as an assisted reproductive technique to conserve endangered species, to treat sterile canids or aged dogs, to improve reproductive performance of valuable individuals and to generate disease model animals. © 2012 Blackwell Verlag GmbH.

  12. Lessons Learned from Past and Ongoing Construction Projects

    International Nuclear Information System (INIS)

    Tabatabai, Omid

    2011-01-01

    Full text of publication follows: The nuclear industry in the U.S. faced many construction quality and design issues in the 1970's and 1980's. In 1984, the NRC issued NUREG-1055, 'Improving Quality and the Assurance of Quality in the Design and Construction of Nuclear Power Plants,' to document the lessons learned from nuclear power plant (NPP) construction in the U.S. In recent years, several countries have begun either planning for or actually constructing new NPPs. For instance, in the U.S., the nuclear industry has submitted several combined license and design certification applications to the NRC for licensing reviews and approval to build 30+ new NPP units. Latest construction experience from countries that are currently building new NPPs indicate that these countries are dealing with challenges that are similar to those issues that caused major quality assurance problems, delays, or even termination of several projects in U.S. in the 70's and 80's. The U.S. NRC is pro-actively taking measures to improve its regulatory programs as well as construction oversight activities before new NPPs construction begin in the U.S. In late 2007, the U.S. NRC's Office of New Reactors established a construction experience program (ConE) to obtain and evaluate construction and operating experience events and to identify the lessons learned from these events. In March 2009, the NRC published an Office Instruction to provide a process for incorporating the lessons learned and insights from the design, construction, and operation of the international and domestic NPPs into the licensing reviews, inspections, and construction of new reactors in the U.S. Additionally, the ConE program staff developed a Web-enabled database to store, manage, and make construction experience information available to all NRC technical reviewers as well as inspectors. Because this database contains information from other countries' regulators that are considered

  13. Microplastics: addressing ecological risk through lessons learned.

    Science.gov (United States)

    Syberg, Kristian; Khan, Farhan R; Selck, Henriette; Palmqvist, Annemette; Banta, Gary T; Daley, Jennifer; Sano, Larissa; Duhaime, Melissa B

    2015-05-01

    Plastic litter is an environmental problem of great concern. Despite the magnitude of the plastic pollution in our water bodies, only limited scientific understanding is available about the risk to the environment, particularly for microplastics. The apparent magnitude of the problem calls for quickly developing sound scientific guidance on the ecological risks of microplastics. The authors suggest that future research into microplastics risks should be guided by lessons learned from the more advanced and better understood areas of (eco) toxicology of engineered nanoparticles and mixture toxicity. Relevant examples of advances in these two fields are provided to help accelerate the scientific learning curve within the relatively unexplored area of microplastics risk assessment. Finally, the authors advocate an expansion of the "vector effect" hypothesis with regard to microplastics risk to help focus research of microplastics environmental risk at different levels of biological and environmental organization. © 2015 SETAC.

  14. Lessons learned from women in leadership positions.

    Science.gov (United States)

    Elias, Eileen

    2018-01-01

    Eileen Elias has decades of experience in leadership positions within government and nongovernmental organizations. As the first female Commissioner for Mental Health in the Commonwealth of Massachusetts and the US in the early 1990s, Elias gained experience on navigating gender-based challenges to attain recognized performance outcomes. From lessons learned from women leaders, educate young women entering their careers on attaining leadership positions. Comprehensive research of literature from 2012 through 2017 and interviews with women leaders representing non-Fortune 500 companies including academia, research, non-profit, for-profit, and primary and secondary education. Interviewees included:1.Gail Bassin, Co-Chief Executive Officer and Treasurer, JBS International Inc.2.Jeri Epstein, Executive Director, The Ambit Foundation3.Valerie Fletcher, Executive Director, Institute for Human Centered Design4.Christine James-Brown, President and CEO, Child Welfare League of America5.Daria Mochly-Rosen, PhD, Professor and Fellow, Chemical and Systems Biology, Stanford University School of Medicine6.Eileen O'Keefe, MD, MPH, Clinical Associate Professor and Director, Boston University Health Sciences7.Jeri Shaw, President and Co-Chief Executive Officer, JBS International Inc. A comprehensive understanding of key women leaders' lessons learned and recommendations targeting young women as they assess leadership opportunities in the public or private sectors.

  15. Lessons Learned in Software Testing A Context-Driven Approach

    CERN Document Server

    Kaner, Cem; Pettichord, Bret

    2008-01-01

    Decades of software testing experience condensed into the most important lessons learned.The world's leading software testing experts lend you their wisdom and years of experience to help you avoid the most common mistakes in testing software. Each lesson is an assertion related to software testing, followed by an explanation or example that shows you the how, when, and why of the testing lesson. More than just tips, tricks, and pitfalls to avoid, Lessons Learned in Software Testing speeds you through the critical testing phase of the software development project without the extensive trial an

  16. Lessons learned from the application of a participatory evaluation methodology to healthy municipalities, cities and communities initiatives in selected countries of the Americas.

    Science.gov (United States)

    Rice, Marilyn; Franceschini, Maria Cristina

    2007-01-01

    Health promotion has made significant strides in the past few decades in the Americas. Creating a healthy and supportive setting, also known as the settings approach, continues to be one of the most widely used health promotion strategies. Interest in evaluating the effectiveness of these strategies has been increasing greatly in the past few years. Participatory evaluation holds great promise for helping to generate this evidence and promote understanding of the factors that affect, positively or negatively, the advances of health promotion in the Region. During 2004-2006, a Participatory Evaluation methodology was introduced into several countries in the Americas through formal trainings conducted by the Pan American Health Organization (PAHO) in collaboration with country partners. This article summarizes the main lessons learned from the application of the participatory evaluation methodology in various countries in Latin America and the Caribbean. Factors affecting the evaluation of the initiatives were identified at multiple levels (individual, community, organizational, political, economic, etc.). Specific issues that were addressed included the political context, turnover of personnel in key institutions, concerns related to the effectiveness of participatory processes, and the existence of strong and sustained leadership at the country level. These factors are intertwined and affect each other in very complex ways, a fact that was reflected in the municipalities' experiences with participatory evaluation. Challenges included the ability to secure resources for the evaluation, the time needed to conclude the process, and working in an intersectoral manner. However, participating municipalities reported that the process of implementing a participatory evaluation and working with various stakeholders had an empowering effect: communities and stakeholders were more willing and interested in participating in health promotion initiatives in a sustained manner

  17. Good alarm design plays a vital role in successful DCS implementation: Hard learned lessons from petrochemical applications

    International Nuclear Information System (INIS)

    Wilson, C.; Rothenberg, D.

    2006-01-01

    Nuclear operators are eager to update their automation infrastructure, but are apprehensive due to the consequences of failure. The process industries have learned that alarm design is critical to a successful Distributed Control System (DCS) implementation. This paper shares valuable insight into how alarms play a key role in successful management of upsets, help focus operator attention, and supply critical information during periods of high stress. (authors)

  18. Driver. D530.2 – Tools for the Lessons Learned Framework

    NARCIS (Netherlands)

    Schaik, M.G. van; et al

    2016-01-01

    In this deliverable D530.2 “Tools for the Lessons Learned Framework” the overall lessons learned framework will be clarified based on the delivery D53.1 “Lessons Learned Framework Concept” and aligned with the deliverable D52.1 “Harmonized competence framework”. The Tools for the Lessons Learned

  19. Shaping Interpersonal Learning in the Jazz Improvisation Lesson: Observing a Dynamic Systems Approach

    Science.gov (United States)

    de Bruin, Leon Rene

    2018-01-01

    Music institutions predominantly utilize the one-to-one lesson in developing and supporting music students' learning of skill and knowledge. This article explores the effect that interpersonal interaction plays in shaping pedagogical applications between teacher and student. Observing the learning of improvisation within this individualized social…

  20. Spent Fuel Storage Operation - Lessons Learned

    International Nuclear Information System (INIS)

    2013-12-01

    Experience gained in planning, constructing, licensing, operating, managing and modifying spent fuel storage facilities in some Member States now exceeds 50 years. Continual improvement is only achieved through post-project review and ongoing evaluation of operations and processes. This publication is aimed at collating and sharing lessons learned. Hopefully, the information provided will assist Member States that already have a developed storage capability and also those considering development of a spent nuclear fuel storage capability in making informed decisions when managing their spent nuclear fuel. This publication is expected to complement the ongoing Coordinated Research Project on Spent Fuel Performance Assessment and Research (SPAR-III); the scope of which prioritizes facility operational practices in lieu of fuel and structural components behaviour over extended durations. The origins of the current publication stem from a consultants meeting held on 10-12 December 2007 in Vienna, with three participants from the IAEA, Slovenia and USA, where an initial questionnaire on spent fuel storage was formulated (Annex I). The resultant questionnaire was circulated to participants of a technical meeting, Spent Fuel Storage Operations - Lessons Learned. The technical meeting was held in Vienna on 13-16 October 2008, and sixteen participants from ten countries attended. A consultants meeting took place on 18-20 May 2009 in Vienna, with five participants from the IAEA, Slovenia, UK and USA. The participants reviewed the completed questionnaires and produced an initial draft of this publication. A third consultants meeting took place on 9-11 March 2010, which six participants from Canada, Hungary, IAEA, Slovenia and the USA attended. The meeting formulated a second questionnaire (Annex II) as a mechanism for gaining further input for this publication. A final consultants meeting was arranged on 20-22 June 2011 in Vienna. Six participants from Hungary, IAEA, Japan

  1. SRMS History, Evolution and Lessons Learned

    Science.gov (United States)

    Jorgensen, Glenn; Bains, Elizabeth

    2011-01-01

    . Evolution of the simulations, guided by the Math Model Working Group, showed the utility of input from multiple modeling groups with a structured forum for discussion.There were many unique development challenges in the areas of hardware, software, certification, modeling and simulation. Over the years, upgrades and enhancements were implemented to increase the capability, performance and safety of the SRMS. The history and evolution of the SRMS program provided many lessons learned that can be used for future space robotic systems.

  2. Mobile Learning vs. Traditional Classroom Lessons: A Comparative Study

    Science.gov (United States)

    Furió, D.; Juan, M.-C.; Seguí, I.; Vivó, R.

    2015-01-01

    Different methods can be used for learning, and they can be compared in several aspects, especially those related to learning outcomes. In this paper, we present a study in order to compare the learning effectiveness and satisfaction of children using an iPhone game for learning the water cycle vs. the traditional classroom lesson. The iPhone game…

  3. 10 lessons learned by a misguided physician.

    Science.gov (United States)

    Levin, Barry E

    2017-07-01

    It was a great and humbling honor to receive the 2016 Distinguished Career Award from my SSIB colleagues. This paper summarizes the major points of my DCA talk at the 2016 annual meeting. It is a reflection on my 50year medical and research career and 10 lessons I have learned over those years which might be of help to young investigators near the beginning of their own research careers. These lessons include: the value of being receptive to the opportunities provided you; how clinician-scientists can serve as critical role models for young investigators like me and a history of how my career developed as a result of their influence; the importance of carefully examining your own data, particularly when it doesn't agree with your preconceived ideas; the critical role that students, postdocs and PhD (and even veterinarian) colleagues can play in developing one's career; the likelihood that your career path will have many interesting twists and turns determined by changes in your own scientific interests and how rewarding various areas of research focus are to you; the importance of building a close-knit laboratory staff family; the fact that science and romance can mix. Finally, I offer 3 somewhat self-evident free pieces of advice for building and maintaining a rewarding career. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Bruce A restart (execution and lessons-learned)

    International Nuclear Information System (INIS)

    Soini, J.

    2011-01-01

    Lessons learned with the Bruce Units 3 and 4 restart have been incorporated into the current refurbishment of Units 1 and 2. In addition, lessons learned on the lead unit (U2) are aggressively applied on the lagging unit (U1) to maximize efficiency and productivity. There will be a discussion on how this internal OPEX, along with external lessons learned, are used to continuously improve all aspects of the Bruce A Restart project management cycle, from scope selection, through planning and scheduling, to execution.

  5. Considerations for implementing an organizational lessons learned process.

    Energy Technology Data Exchange (ETDEWEB)

    Fosshage, Erik D

    2013-05-01

    This report examines the lessons learned process by a review of the literature in a variety of disciplines, and is intended as a guidepost for organizations that are considering the implementation of their own closed-loop learning process. Lessons learned definitions are provided within the broader context of knowledge management and the framework of a learning organization. Shortcomings of existing practices are summarized in an attempt to identify common pitfalls that can be avoided by organizations with fledgling experiences of their own. Lessons learned are then examined through a dual construct of both process and mechanism, with emphasis on integrating into organizational processes and promoting lesson reuse through data attributes that contribute toward changed behaviors. The report concludes with recommended steps for follow-on efforts.

  6. Pedagogy and second language learning: Lessons learned from Intensive French

    Directory of Open Access Journals (Sweden)

    Joan Netten

    2005-12-01

    Full Text Available Abstract Through research and classroom observation undertaken while conceptualizing and implementing the Intensive French program in Canada, many new insights were gained into the development of communication skills in a classroom situation. Five lessons learned about the development of spontaneous oral communication are presented in this article: the ineffectiveness of core French in primary school; the minimum number of intensive hours necessary to develop spontaneous oral communication; the need to develop implicit competence rather than explicit knowledge; the distinction between accuracy as knowledge and accuracy as skill; and the importance of teaching strategies focusing on language use. These lessons have implications for our understanding of how oral competence in an L2 develops and for the improvement of communicative language pedagogy.

  7. Digital control for nuclear reactors - lessons learned

    International Nuclear Information System (INIS)

    Bernard, J.A.; Aviles, B.N.; Lanning, D.D.

    1992-01-01

    Lessons learned during the course of the now decade-old MIT program on the digital control of nuclear reactors are enumerated. Relative to controller structure, these include the importance of a separate safety system, the need for signal validation, the role of supervisory algorithms, the significance of command validation, and the relevance of automated reasoning. Relative to controller implementation, these include the value of nodal methods to the creation of real-time reactor physics and thermal hydraulic models, the advantages to be gained from the use of real-time system models, and the importance of a multi-tiered structure to the simultaneous achievement of supervisory, global, and local control. Block diagrams are presented of proposed controllers and selected experimental and simulation-study results are shown. In addition, a history is given of the MIT program on reactor digital control

  8. Lessons learned using Snodgrass hypospadias repair.

    LENUS (Irish Health Repository)

    O'Connor, K M

    2012-02-03

    BACKGROUND: This is a review of our experience with the Snodgrass technique for distal hypospadias repair and we point to lessons learned in improving results. METHODS: We reviewed all patients who underwent Snodgrass hypospadias repair for distal hypospadias over a four-year period by a single surgeon. Chart review followed by parental telephone interview was used to determine voiding function, cosmesis and complication rate. RESULTS: Thirty children and three adults were identified. Age at surgery ranged from seven months to 39 years. The urinary stream was straight in 94%, and 97% reported a good or satisfactory final cosmetic outcome. One patient (3.3%) developed a urethral fistula and 21% developed meatal stenosis which required general anaesthetic. CONCLUSION: The Snodgrass urethroplasty provides satisfactory cosmetic and functional results. High rates of meatal stenosis initially encountered have improved with modifications to technique which include modified meatoplasty and routine meatal dilatation by the parents.

  9. Lessons learned during Type A Packaging testing

    International Nuclear Information System (INIS)

    O'Brien, J.H.; Kelly, D.L.

    1995-11-01

    For the past 6 years, the US Department of Energy (DOE) Office of Facility Safety Analysis (EH-32) has contracted Westinghouse Hanford Company (WHC) to conduct compliance testing on DOE Type A packagings. The packagings are tested for compliance with the U.S. Department of Transportation (DOT) Specification 7A, general packaging, Type A requirements. The DOE has shared the Type A packaging information throughout the nuclear materials transportation community. During testing, there have been recurring areas of packaging design that resulted in testing delays and/or initial failure. The lessons learned during the testing are considered a valuable resource. DOE requested that WHC share this resource. By sharing what is and can be encountered during packaging testing, individuals will hopefully avoid past mistakes

  10. Sellafield Decommissioning Programme - Update and Lessons Learned

    International Nuclear Information System (INIS)

    Lutwyche, P. R.; Challinor, S. F.

    2003-01-01

    The Sellafield site in North West England has over 240 active facilities covering the full nuclear cycle from fuel manufacture through generation, reprocessing and waste treatment. The Sellafield decommissioning programme was formally initiated in the mid 1980s though several plants had been decommissioned prior to this primarily to create space for other plants. Since the initiation of the programme 7 plants have been completely decommissioned, significant progress has been made in a further 16 and a total of 56 major project phases have been completed. This programme update will explain the decommissioning arrangements and strategies and illustrate the progress made on a number of the plants including the Windscale Pile Chimneys, the first reprocessing plan and plutonium plants. These present a range of different challenges and requiring approaches from fully hands on to fully remote. Some of the key lessons learned will be highlighted

  11. XML technology planning database : lessons learned

    Science.gov (United States)

    Some, Raphael R.; Neff, Jon M.

    2005-01-01

    A hierarchical Extensible Markup Language(XML) database called XCALIBR (XML Analysis LIBRary) has been developed by Millennium Program to assist in technology investment (ROI) analysis and technology Language Capability the New return on portfolio optimization. The database contains mission requirements and technology capabilities, which are related by use of an XML dictionary. The XML dictionary codifies a standardized taxonomy for space missions, systems, subsystems and technologies. In addition to being used for ROI analysis, the database is being examined for use in project planning, tracking and documentation. During the past year, the database has moved from development into alpha testing. This paper describes the lessons learned during construction and testing of the prototype database and the motivation for moving from an XML taxonomy to a standard XML-based ontology.

  12. Software Engineering Team Project - lessons learned

    Directory of Open Access Journals (Sweden)

    Bogumiła Hnatkowska

    2013-06-01

    Full Text Available In the 2010/11 academic year the Institute of Informatics at Wroclaw University of Technology issued ’Software Engineering Team Project’ as a course being a part of the final exam to earn bachelor’s degree. The main assumption about the course was that it should simulate the real environment (a virtual IT company for its participants. The course was aimed to introduce issues regarding programming in the medium scale, project planning and management. It was a real challenge as the course was offered for more than 140 students. The number of staff members involved in its preparation and performance was more than 15. The paper presents the lessons learned from the first course edition as well as more detailed qualitative and quantitative course assessment.

  13. Clinical Education, the lessons learned from practical applications - Albanian issues, East Europe and the advanced international practices on Clinical Education

    Directory of Open Access Journals (Sweden)

    Alban Koci

    2015-01-01

    In legal clinics, students perform various tasks just as an attorney would do in the same job position, such as doing legal research, drafting briefs and other legal documents, and interviewing clients. Many jurisdictions even allow students to appear in court on behalf of clients, even in criminal defense. Legal clinics is part of the academic law program in the most of the law faculties all over the world and it has a great impact in the community’s life. Throughout legal clinics students not only get the opportunity to be part of an important experience, but also they can be effective and help the people in need with their work. This paper aims to bring attention to the importance of clinical education in the formation of young lawyers and how one can learn from experience. There will be discussed important issues about legal clinic, the objectives and its mission, how to apply it and the benefits legal clinic brings not only for the academic area but also for the society.

  14. Pseudomonas fluorescens HK44: Lessons Learned from a Model Whole-Cell Bioreporter with a Broad Application History

    Directory of Open Access Journals (Sweden)

    Gary S. Sayler

    2012-02-01

    Full Text Available Initially described in 1990, Pseudomonas fluorescens HK44 served as the first whole-cell bioreporter genetically endowed with a bioluminescent (luxCDABE phenotype directly linked to a catabolic (naphthalene degradative pathway. HK44 was the first genetically engineered microorganism to be released in the field to monitor bioremediation potential. Subsequent to that release, strain HK44 had been introduced into other solids (soils, sands, liquid (water, wastewater, and volatile environments. In these matrices, it has functioned as one of the best characterized chemically-responsive environmental bioreporters and as a model organism for understanding bacterial colonization and transport, cell immobilization strategies, and the kinetics of cellular bioluminescent emission. This review summarizes the characteristics of P. fluorescens HK44 and the extensive range of its applications with special focus on the monitoring of bioremediation processes and biosensing of environmental pollution.

  15. M-learning in a geography lesson

    Science.gov (United States)

    Mirski, Katri

    2014-05-01

    their work in Google Earth where they did a tour of their journey. In the feedback students said that it was a very interesting and an educational practical task. A new opportunity in M-learning is to use QR codes. This means that you don't have to print out worksheets with questions. You can hide question in the code and students can read them with their own devices on site. From the Master's thesis I also developed a tutorial material named "M-learning in a geography lesson" (in Estonian: M-õpe geograafiatunnis), you can see it in the webpage katrimope@wordpress.com. The tutorial received a second place on the Estonian study material contest in 2013. This is only one example on how to use M-learning. In Gustav Adolf Grammar School we use M-learning in lots of different subjects because it's really important in modern school to link new technologies, surrounding environment and learning for the purpose of better obtainment of knowledge.

  16. Towards a lessons learned system for critical software

    International Nuclear Information System (INIS)

    Andrade, J.; Ares, J.; Garcia, R.; Pazos, J.; Rodriguez, S.; Rodriguez-Paton, A.; Silva, A.

    2007-01-01

    Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists

  17. Towards a lessons learned system for critical software

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: jag@udc.es; Ares, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: juanar@udc.es; Garcia, R. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: rafael@udc.es; Pazos, J. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: jpazos@fi.upm.es; Rodriguez, S. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: santi@udc.es; Rodriguez-Paton, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: arpaton@fi.upm.es; Silva, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: asilva@fi.upm.es

    2007-07-15

    Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists.

  18. Winning the Peace: Building a Strategic Level Lessons Learned Program

    National Research Council Canada - National Science Library

    French, Daniel L

    2007-01-01

    The U.S. military has developed a robust, comprehensive system to capture, analyze, and disseminate tactical-level and operational-level lessons learned from training events and ongoing conflict operations...

  19. Lessons learned on stakeholder issues in decommissioning

    International Nuclear Information System (INIS)

    O'Sullivan, P.; Pescatore, C.

    2008-01-01

    Issues of public concern during decommissioning and dismantling (D and D) are partly the same and partly different from those of the preceding phases (planning, construction and operation). While in the course of construction and operation the main challenges include meeting expectations of a higher quality of life, accommodating a growing population, mitigating construction nuisances, and assuring the safe operation of the facility, the main concerns in the D and D phase are decreasing employment rate, the eventual reduction of revenues for the municipality, the future use of the affected land and negative social impacts (e.g., out-migration). The decommissioning phase is characterised by heterogeneity of stakeholder interests and values, difficulties of reaching consensus or compromise, and difficulties in connection with the harmonization of energy production, environmental protection and sustainable socio-economic development considerations. Typically, there might also be tensions between local and regional decisions. As in other phases, the building of trust between stakeholder is crucial from the point of view of conflict management, and social lessons learnt from the siting and developments of nuclear facilities are widely applicable in the field of D and D as well. A review is presented of major lessons to be learnt from NEA activities in the field of decommissioning and stakeholder involvement. (author)

  20. Lessons learned on stakeholder issues in decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    O' Sullivan, P.; Pescatore, C. [OECD Nuclear Energy Agency, 92 - Issy les Moulineaux (France)

    2008-07-01

    Issues of public concern during decommissioning and dismantling (D and D) are partly the same and partly different from those of the preceding phases (planning, construction and operation). While in the course of construction and operation the main challenges include meeting expectations of a higher quality of life, accommodating a growing population, mitigating construction nuisances, and assuring the safe operation of the facility, the main concerns in the D and D phase are decreasing employment rate, the eventual reduction of revenues for the municipality, the future use of the affected land and negative social impacts (e.g., out-migration). The decommissioning phase is characterised by heterogeneity of stakeholder interests and values, difficulties of reaching consensus or compromise, and difficulties in connection with the harmonization of energy production, environmental protection and sustainable socio-economic development considerations. Typically, there might also be tensions between local and regional decisions. As in other phases, the building of trust between stakeholder is crucial from the point of view of conflict management, and social lessons learnt from the siting and developments of nuclear facilities are widely applicable in the field of D and D as well. A review is presented of major lessons to be learnt from NEA activities in the field of decommissioning and stakeholder involvement. (author)

  1. The Implementation of Lesson Study in English Language Learning: A Case Study

    Directory of Open Access Journals (Sweden)

    Wakhid Nashruddin

    2016-12-01

    Full Text Available Lesson Study as a growing interest in the education world has attracted educators, experts, and professionals in the area to make use of it in improving the lessons—it also happens in Indonesia. Originally applied in the teaching of mathematics in Japan, now it turns to be used in other fields, and English is one of them. This paper highlights the guideline on Lesson Study and pictures its application in a private senior high school in Malang, East Java, Indonesia. The adaptation of Lesson Study is interesting since Japan and Indonesia have different cultural background. How Lesson Study is usually implemented in Japan and the US and how it is applied in Indonesia will be seen here. As this is a case study, it will only focus on a school and the result should not be used to generalize Lesson Study applications in Indonesia. Interview and observation were instruments used in this study. The interview was used to gain information on how Lesson Study was normally conducted and observation (and the researchers’ involvements was used to see the real implementation of Lesson Study. What happened during the implementation of Lesson Study and during the teaching and learning process become a great attention here.

  2. Implementing a lessons learned process at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Fosshage, Erik D.; Drewien, Celeste A.; Eras, Kenneth; Hartwig, Ronald Craig; Post, Debra S.; Stoecker, Nora Kathleen

    2016-01-01

    The Lessons Learned Process Improvement Team was tasked to gain an understanding of the existing lessons learned environment within the major programs at Sandia National Laboratories, identify opportunities for improvement in that environment as compared to desired attributes, propose alternative implementations to address existing inefficiencies, perform qualitative evaluations of alternative implementations, and recommend one or more near-term activities for prototyping and/or implementation. This report documents the work and findings of the team.

  3. Lessons Learned in International Safeguards - Implementation of Safeguards at the Rokkasho Reprocessing Plant

    International Nuclear Information System (INIS)

    Ehinger, Michael H.; Johnson, Shirley

    2010-01-01

    The focus of this report is lessons learned at the Rokkasho Reprocessing Plant (RRP). However, the subject of lessons learned for application of international safeguards at reprocessing plants includes a cumulative history of inspections starting at the West Valley (New York, U.S.A.) reprocessing plant in 1969 and proceeding through all of the efforts over the years. The RRP is the latest and most challenging application the International Atomic Energy Agency has faced. In many ways the challenges have remained the same, timely inspection and evaluation with limited inspector resources, with the continuing realization that planning and preparations can never start early enough in the life cycle of a facility. Lessons learned over the years have involved the challenges of using ongoing advances in technology and dealing with facilities with increased throughput and continuous operation. This report will begin with a review of historical developments and lessons learned. This will provide a basis for a discussion of the experiences and lessons learned from the implementation of international safeguards at RRP.

  4. Operational experience - Lessons learned from IRS-reports in Germany

    International Nuclear Information System (INIS)

    Wetzel, N.; Maqua, M.

    2005-01-01

    The international Incident Reporting System (IRS), jointly operated by IAEA and OECD-NEA, is a main source of safety significant findings and lessons learned of nuclear operating experience. GRS (Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH) is a scientific-technical expert and research organisation. On Behalf of the Federal Minister of Environment, Nature Conservation and Reactor Safety (BMU), GRS provides the IRS officer. The evaluation of IRS-Reports and the dissemination of the main findings including the assessment of the relevance for German NPPs is task of GRS. The value of IRS is among experts undoubted. But nevertheless, the reporting to IRS decreases since some years. This presentation is aimed to show the support of IRS in strengthening the safety of German NPPs. The evaluation of IRS-Reports at GRS is three-fold. It comprises initial screening, quarterly and yearly reporting and the development of specific German Information Notices on safety significant events with direct applicability to German NPPs. Some examples of lessons learned from recent international events are discussed below. These examples shall demonstrate that the use of the IRS enhances significantly the knowledge on operational events. (author)

  5. Lessons learned by southern states in designating alternative routes

    International Nuclear Information System (INIS)

    1989-08-01

    The purpose of this report is to discuss the ''lessons learned'' by the five states within the southem region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations. Under DOT regulations (49 CFR 177.826), carriers of highway route controlled quantities of radioactive materials (which include spent nuclear fuel and high-level waste) must use preferred routes selected to reduce time in transit. Such preferred routes consist of (1) an interstate system highway with use of an interstate system bypass or beltway around cities when available, and (2) alternate routes selected by a ''state routing agency.''

  6. Existing facilities and past practices: Lessons learned

    International Nuclear Information System (INIS)

    Huizenga, D.; Tonkay, D.W.; Owens, K.

    2000-01-01

    Article 12 of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) requires parties to the Joint Convention to review the safety of existing radioactive waste management facilities 'to ensure that, if necessary, all reasonably practicable improvements are made to upgrade the safety of such a facility'. Also required is a review of the results of past practices to determine 'whether any intervention is needed for reasons of radiation protection' and to consider whether the benefits of the intervention or remediation are sufficient, with regard to the costs and the impact on workers, the public and the environment. This paper discusses the experience of the United States Department of Energy in terms of the lessons learned from operating radioactive waste management facilities and from undertaking intervention or remedial action, and from decision making in an international context. Overarching safety principles are discussed, including integrating safety into all work practices and minimizing the generation of waste. Safety review lessons learned with existing facilities are discussed with respect to: applying new requirements to old facilities, taking a life-cycle perspective of waste management, improving high level waste facility management, and blending current and past practices with respect to the process used to arrive at decisions for intervention. Special emphasis is placed on the need to provide for early and substantive input from the involved regulatory agencies, Native American tribes, and those citizens and groups with an interest in the decisions. Examples of intervention decisions are discussed, including examples taken from uranium mill tailings operations, from cleanup of a former uranium processing plant site, from evaluation of pre-1970 buried 'transuranic waste' sites, and from decommissioning or closure of high level waste storage tanks. The paper concludes that on the

  7. Application of mixed-methods design in community-engaged research: Lessons learned from an evidence-based intervention for Latinos with chronic illness and minor depression.

    Science.gov (United States)

    Aguado Loi, Claudia X; Alfonso, Moya L; Chan, Isabella; Anderson, Kelsey; Tyson, Dinorah Dina Martinez; Gonzales, Junius; Corvin, Jaime

    2017-08-01

    The purpose of this paper is to share lessons learned from a collaborative, community-informed mixed-methods approach to adapting an evidence-based intervention to meet the needs of Latinos with chronic disease and minor depression and their family members. Mixed-methods informed by community-based participatory research (CBPR) were employed to triangulate multiple stakeholders' perceptions of facilitators and barriers of implementing the adapted intervention in community settings. Community partners provided an insider perspective to overcome methodological challenges. The study's community informed mixed-methods: research approach offered advantages to a single research methodology by expanding or confirming research findings and engaging multiple stakeholders in data collection. This approach also allowed community partners to collaborate with academic partners in key research decisions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Collecting lessons learned : How project-based organizations in the oil and gas industry learn from their projects

    NARCIS (Netherlands)

    Buttler, T.

    2016-01-01

    Project-based organizations collect lessons learned in order to improve the performance of projects. They aim to repeat successes by using positive lessons learned, and to avoid repeating negative experiences by using negative lessons learned. Cooke-Davies (2002) claimed that the ability to learn

  9. Lessons learned -- NREL Village Power Program

    Energy Technology Data Exchange (ETDEWEB)

    Flowers, L.

    1998-07-01

    In 1993, a workshop was convened at the National Renewable Energy Laboratory (NREL) to discuss the issues of applying renewable energy in a sustainable manner to international rural development. One of the summary recommendations was that NREL could assist in the renewable energy for rural electrification effort by developing and supplying six related activities: resource assessment, comparative analysis and modeling, performance monitoring and analysis, pilot project development, internet-based project data, communications, and training. In response to this recommendation, NREL launched its Village Power Program consisting of these activities that cut across NREL technologies and disciplines. Currently NREL is active in 20 countries, with pilot projects in 12 of those countries. At this time the technologies include photovoltaics, wind, biomass, and hybrids. The rural applications include home lighting and communications, water pumping, schools and health posts, battery charging stations, ecotourism, and village systems. These pilot projects are central to the renewable energy village power development through the demonstration of three aspects critical to replication and implementation of the projects on a significant scale. The three aspects are technical functionality, economic competitiveness, and institutional sustainability. It is important to note that the pilot projects from which NREL's experience has been gained were funded and, in many cases, developed by other organizations and agencies. NREL's role has been one of technical assistance or project management or both. The purpose of this paper is to describe the lessons NREL staff has gleaned from their participation in the various pilot projects. The author hopes that these lessons will help the Renewable Energy-Based Rural Electrification (RERE) community in implementing sustainable projects that lead to replication.

  10. Lessons Learned in Risk Management on NCSX

    International Nuclear Information System (INIS)

    Neilson, G.H.; Gruber, C.O.; Harris, Jeffrey H.; Rej, D.J.; Simmons, R.T.; Strykowsky, R.L.

    2010-01-01

    The National Compact Stellarator Experiment (NCSX) was designed to test physics principles of an innovative stellarator design developed by Princeton Plasma Physics Laboratory and Oak Ridge National Laboratory. Construction of some of the major components and subassemblies was completed, but the estimated cost and schedule for completing the project grew as the technical requirements and risks became better understood, leading to its cancellation in 2008. The project's risks stemmed from its technical challenges, primarily the complex component geometries and tight tolerances that were required. The initial baseline, which was established in 2004, was supported by a risk management plan and risk-based contingencies, both of which proved to be inadequate. Technical successes were achieved in the construction of challenging components and subassemblies, but cost and schedule growth was experienced. As part of an effort to improve project performance, a new risk management program was devised and implemented in 2007-2008. It led to a better understanding of project risks, a sounder basis for contingency estimates, and improved management tools. Although the risks were ultimately unacceptable to the sponsor, valuable lessons in risk management were learned through the experiences with the NCSX project.

  11. The German Chernobyl project: Lessons learned

    International Nuclear Information System (INIS)

    Hill, P.; Hille, R.

    1999-01-01

    This report presents results and lessons learned by one of the so far largest assessments of a post-accidental situation. Funded by the Federal Republic of Germany the German Chernobyl Project investigated in the years 1991-1993 the radiological situation in contaminated regions of the Russian Federation, Belarus and Ukraine. Measurements included a mass screening of the population in order to determine the Cesium body burdens of 250,000+ individuals in more than 240 settlements as well as the evaluation of external doses in selected settlements with soil contaminations varying from less than 74 kBq/m 2 to about 3700 kBq/m 2 including some, where decontamination measures had previously been taken. Also in many settlements environmental monitoring was undertaken. For most individuals doses did not exceed the international annual limits set for the general population. Open and comprehensive communication of results was favourably accepted by the public. In a few settlements the radiological situation has been followed up till to date. (author)

  12. Lessons Learned in Risk Management on NCSX

    International Nuclear Information System (INIS)

    Neilson, G.H.; Gruber, C.O.; Harris, J.H.; Rej, D.J.; Simmons, R.T.; Strykowsky, R.L.

    2009-01-01

    The National Compact Stellarator Experiment (NCSX) was designed to test physics principles of an innovative stellarator design developed by the Princeton Plasma Physics Laboratory and Oak Ridge National Laboratory. Construction of some of the major components and sub-assemblies was completed, but the estimated cost and schedule for completing the project grew as the technical requirements and risks became better understood, leading to its cancellation in 2008. The project's risks stemmed from its technical challenges, primarily the complex component geometries and tight tolerances that were required. The initial baseline, established in 2004, was supported by a risk management plan and risk-based contingencies, both of which proved to be inadequate. Technical successes were achieved in the construction of challenging components and subassemblies, but cost and schedule growth was experienced. As part of an effort to improve project performance, a new risk management program was devised and implemented in 2007-08. It led to a better understanding of project risks, a sounder basis for contingency estimates, and improved management tools. Although the risks ultimately were unacceptable to the sponsor, valuable lessons in risk management were learned through the experiences with the NCSX project

  13. Value-Based Requirements Traceability: Lessons Learned

    Science.gov (United States)

    Egyed, Alexander; Grünbacher, Paul; Heindl, Matthias; Biffl, Stefan

    Traceability from requirements to code is mandated by numerous software development standards. These standards, however, are not explicit about the appropriate level of quality of trace links. From a technical perspective, trace quality should meet the needs of the intended trace utilizations. Unfortunately, long-term trace utilizations are typically unknown at the time of trace acquisition which represents a dilemma for many companies. This chapter suggests ways to balance the cost and benefits of requirements traceability. We present data from three case studies demonstrating that trace acquisition requires broad coverage but can tolerate imprecision. With this trade-off our lessons learned suggest a traceability strategy that (1) provides trace links more quickly, (2) refines trace links according to user-defined value considerations, and (3) supports the later refinement of trace links in case the initial value consideration has changed over time. The scope of our work considers the entire life cycle of traceability instead of just the creation of trace links.

  14. Intelligence and Nuclear Proliferation: Lessons Learned

    International Nuclear Information System (INIS)

    Hansen, Keith A.

    2011-09-01

    Intelligence agencies play a fundamental role in the prevention of nuclear proliferation, as they help to understand other countries' intentions and assess their technical capabilities and the nature of their nuclear activities. The challenges in this area remain, however, formidable. Past experiences and the discoveries of Iraq's WMD programs, of North Korean nuclear weapon program, and of Iranian activities, have put into question the ability of intelligence to monitor small, clandestine proliferation activities from either states or non-state entities. This Proliferation Paper analyzes the complex challenges intelligence faces and the various roles it plays in supporting national and international nuclear non-proliferation efforts, and reviews its track record. In an effort to shed light on the role and contribution of intelligence in national and international efforts to halt, if not prevent, further nuclear weapon proliferation, this paper first analyzes the challenges intelligence faces in monitoring small, clandestine proliferation activities and the role it plays in supporting non-proliferation efforts. It then reviews the intelligence track record in monitoring proliferation including the lessons learned from Iraq. Finally, it addresses whether it is possible for intelligence to accurately monitor future clandestine proliferation efforts. (author)

  15. Constellation Program: Lessons Learned. Volume 1; Executive Summary

    Science.gov (United States)

    Rhatigan, Jennifer L. (Editor)

    2011-01-01

    This document (Volume I) provides an executive summary of the lessons learned from the Constellation Program. A companion Volume II provides more detailed analyses for those seeking further insight and information. In this volume, Section 1.0 introduces the approach in preparing and organizing the content to enable rapid assimilation of the lessons. Section 2.0 describes the contextual framework in which the Constellation Program was formulated and functioned that is necessary to understand most of the lessons. Context of a former program may seem irrelevant in the heady days of new program formulation. However, readers should take some time to understand the context. Many of the lessons would be different in a different context, so the reader should reflect on the similarities and differences in his or her current circumstances. Section 3.0 summarizes key findings developed from the significant lessons learned at the program level that appear in Section 4.0. Readers can use the key findings in Section 3.0 to peruse for particular topics, and will find more supporting detail and analyses in Section 4.0 in a topical format. Appendix A contains a white paper describing the Constellation Program formulation that may be of use to readers wanting more context or background information. The reader will no doubt recognize some very similar themes from previous lessons learned, blue-ribbon committee reviews, National Academy reviews, and advisory panel reviews for this and other large-scale human spaceflight programs; including Apollo, Space Shuttle, Shuttle/Mir, and the ISS. This could represent an inability to learn lessons from previous generations; however, it is more likely that similar challenges persist in the Agency structure and approach to program formulation, budget advocacy, and management. Perhaps the greatest value of these Constellation lessons learned can be found in viewing them in context with these previous efforts to guide and advise the Agency and its

  16. Lessons learned from the design and implementation of distributed post-WIMP user interfaces

    OpenAIRE

    Seifried, Thomas; Jetter, Hans-Christian; Haller, Michael; Reiterer, Harald

    2011-01-01

    Creating novel user interfaces that are “natural” and distributed is challenging for designers and developers. “Natural” interaction techniques are barely standardized and in combination with distributed UIs additional technical difficulties arise. In this paper we present the lessons we have learned in developing several natural and distributed user interfaces and propose design patterns to support development of such applications.

  17. Innovative Work Practices and Lessons Learned at the N Area Deactivation Project

    International Nuclear Information System (INIS)

    Day, R.S.

    1999-01-01

    This report identifies many of the lessons learned, innovations,and effective work practices that derived from activities supporting the N Area Deactivation Project at the U.S. Department of Energy's (DOE) Hanford Site. The work practices discussed in this report may be applicable and beneficial to similar projects throughout the DOE complex

  18. Let's Cooperate! Integrating Cooperative Learning Into a Lesson on Ethics.

    Science.gov (United States)

    Reineke, Patricia R

    2017-04-01

    Cooperative learning is an effective teaching strategy that promotes active participation in learning and can be used in academic, clinical practice, and professional development settings. This article describes that strategy and provides an example of its use in a lesson about ethics. J Contin Nurs Educ. 2017;48(4):154-156. Copyright 2017, SLACK Incorporated.

  19. Conservation Genetics of the Cheetah: Lessons Learned and New Opportunities.

    Science.gov (United States)

    O'Brien, Stephen J; Johnson, Warren E; Driscoll, Carlos A; Dobrynin, Pavel; Marker, Laurie

    2017-09-01

    The dwindling wildlife species of our planet have become a cause célèbre for conservation groups, governments, and concerned citizens throughout the world. The application of powerful new genetic technologies to surviving populations of threatened mammals has revolutionized our ability to recognize hidden perils that afflict them. We have learned new lessons of survival, adaptation, and evolution from viewing the natural history of genomes in hundreds of detailed studies. A single case history of one species, the African cheetah, Acinonyx jubatus, is here reviewed to reveal a long-term story of conservation challenges and action informed by genetic discoveries and insights. A synthesis of 3 decades of data, interpretation, and controversy, capped by whole genome sequence analysis of cheetahs, provides a compelling tale of conservation relevance and action to protect this species and other threatened wildlife. © The American Genetic Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  20. Learning from the application of the systematic approach to training

    International Nuclear Information System (INIS)

    Haber, S.B.; Yoder, J.A.

    1998-01-01

    The paper describes the objectives, lessons learned, key accomplishments and related activities of the application of the systematic approach to training initiated by DOE in Russia and Ukraine in 1992 focused on single facility in each country

  1. A Text Mining Approach for Extracting Lessons Learned from Project Documentation: An Illustrative Case Study

    Directory of Open Access Journals (Sweden)

    Benjamin Matthies

    2017-12-01

    Full Text Available Lessons learned are important building blocks for continuous learning in project-based organisations. Nonetheless, the practical reality is that lessons learned are often not consistently reused for organisational learning. Two problems are commonly described in this context: the information overload and the lack of procedures and methods for the assessment and implementation of lessons learned. This paper addresses these problems, and appropriate solutions are combined in a systematic lesson learned process. Latent Dirichlet Allocation is presented to solve the first problem. Regarding the second problem, established risk management methods are adapted. The entire lessons learned process will be demonstrated in a practical case study

  2. A summary of lessons learned at the Shippingport Station Decommissioning Project (SSDP)

    International Nuclear Information System (INIS)

    Crimi, F.P.; Mullee, G.R.

    1987-10-01

    This paper describes the lessons learned from a management perspective during decommissioning. The lessons learned are presented in a chronological sequence during the life of the project up to the present time. The careful analysis of the lessons learned and the implementation of corresponding actions have contributed toward improving the effectiveness of decommissioning as time progresses. The lessons learned should be helpful in planning future decommissioning projects

  3. Lessons learned from radiological accidents at medical exposures in radiotherapy

    International Nuclear Information System (INIS)

    Fagundes, J.S.; Ferreira, A.F.; Lima, C.M.A.; Silva, F.C.A. da

    2017-01-01

    An exposure is considered accidental in radiotherapy when there is a substantial deviation in the prescription of treatment. In this work, an analysis of published radiological accidents, both in Brazil and internationally, was performed during medical exposures in radiotherapy treatments, removing the main lessons learned. Of the research carried out, we highlight Brazil with four radiological accidents and one death in the period between 2011 and 2014; the United States of America with 169 accidents with two deaths from 2000 to 2010 and France from 2001 to 2014 had 569 deaths without patients. Lessons learned have been described, for example, that maintenance personnel training should specify limitations or restrictions on the handling or adjustment of critical parts on the accelerator. It is recommended to apply the 10 main lessons learned due to radiological accidents during medical exposures in radiotherapy treatments to avoid future events

  4. Safety Requirements / Design Criteria for SFR. Lessons Learned from the Fukushima Dai-ichi Accident

    International Nuclear Information System (INIS)

    Yllera, Javier

    2013-01-01

    After the Fukushima event (March 2011) the IAEA has started an action to review and revise, if necessary, all Safety Standards to take into consideration the lessons learned from the accident. The Safety Standards that need to be revised have been identified. A Prioritization Approach has been established: The first priority is to review safety guides applicable for NPPs and spent fuel storage with focus on the measures for the prevention and mitigation of severe accident due to external hazards - ● Regulatory framework, Safety assessment, Management system, Radiation protection and Emergency Preparedness and response; ● Sitting, Design, Operation of NPPs ● Decommissioning and Waste Management. Original sources for lessons learned: IAE fact Finding Mission, Japan´s report to the Ministerial Conference, INSAG Report, etc. Later, other lesson sources considered

  5. Licence renewal in the United States - enhancing the process through lessons learned

    International Nuclear Information System (INIS)

    Walters, D.J.

    2000-01-01

    The Nuclear Energy Institute (NEI) is the Washington based policy organisation representing the broad and varied interests of the diverse nuclear energy industry. It comprises nearly 300 corporate members in 15 countries with a budget last year of about USD 26.5 million. It has been working for 10 years with the Nuclear Regulatory Commission (NRC), colleagues in the industry and others to demonstrate that license renewal is a safe and workable process. The first renewed license was issued on 24 March to BGE for the the Calvert Cliffs plant. One month later the NRC issued the renewed license for the Ocoenne plant. By 'Enhancing the process through lessons learned', we mean reducing the uncertainty in the license renewal process. This is achieved through lessons learned from the net wave of applicants and the reviews of the Calvert Cliffs and Ocoenne applications. Three areas will be covered: - Incentive for minimising uncertainty as industry interest in license renewal is growing dramatically. - Rigorous reviews by Nuclear Regulatory Commission assure continued safety: process put in place by the Nuclear Regulatory Commission to assure safety throughout the license renewal term, specifically areas where the lessons learned suggest improvements can be made. - Lessons learned have identified enhancements to the process: numerous benefits associated with renewal of nuclear power plant licenses for consumers of electricity, the environment, the nuclear operating companies and the nation. (author)

  6. Shared Learning and the Drive to Improve Patient Safety: Lessons Learned from the Pittsburgh Regional Healthcare Initiative

    National Research Council Canada - National Science Library

    Sirio, Carl A; Keyser, Donna J; Norman, Heidi; Weber, Robert J; Muto, Carlene A

    2005-01-01

    Based on lessons learned through implementation of the Pittsburgh Regional Healthcare Initiative's region-wide shared learning model, we have identified the environmental, cultural, and infrastructure...

  7. Noncombatant Evacuation Operations: Department of State’s Lessons Learned Program

    Science.gov (United States)

    2016-06-10

    means for utilizing the lessons learned, in some form of rehearsal or exercise, will 4 make the lessons learned meaningful. A lesson should only...required by DOS policy. The Department agreed with the recommendations to establish certain procedures to address the need to constantly 44 update...doctrine.31 Futch also explained that CALL is constantly seeking to expand training and educational efforts about the lessons learned process and

  8. TMI-2 Lessons Learned Task Force. Final report

    International Nuclear Information System (INIS)

    1979-10-01

    In its final report reviewing the Three Mile Island accident, the TMI-2 Lessons Learned Task Force has suggested change in several fundamental aspects of basic safety policy for nuclear power plants. Changes in nuclear power plant design and operations and in the regulatory process are discussed in terms of general goals. The appendix sets forth specific recommendations for reaching these goals

  9. Denmark's Master of Public Governance Program: Assessment and Lessons Learned

    Science.gov (United States)

    Greve, Carsten; Pedersen, Anne Reff

    2017-01-01

    This paper focuses on Denmark's Master of Public Governance and its assessments and lessons learned. Denmark is seen to have an efficient economy and public sector, a digitalized public service delivery system, and an advanced work-life balance. The Danish government invested substantial resources into developing a Master of Public Governance…

  10. Lessons Learned from Becoming an Independent Standards Board.

    Science.gov (United States)

    Board, John C.

    This paper discusses lessons learned from becoming an independent standards board. It begins by explaining that teachers lacked adequate academic preparation during the two World Wars and shortly thereafter. At the end of World War II, public education had to deal with poor pay, little job security, inadequate pensions, and inadequate and…

  11. Writing Learning Outcomes for English Language Lessons in Multilingual Schools

    Science.gov (United States)

    Jones, Sally Ann

    2016-01-01

    This article proposes a pedagogic innovation in teacher education by articulating a method for writing learning outcomes for English language lessons in multilingual school contexts. The argument for this approach is founded on curriculum studies; however, the practice also draws specifically on applied psycholinguistic and sociolinguistic…

  12. Public perception of radioactive waste management and lessons learned

    International Nuclear Information System (INIS)

    Curd, J.

    1989-01-01

    Information officers from United Kingdom Nirex Ltd have been dealing with one of industry's most intractable public relations programmes for five years. Mistakes have been made but lessons have been learned and are now being applied to the Company's current programme - the deep underground disposal of solid low-level and intermediate-level radioactive waste. (author)

  13. Achieving Balance: Lessons Learned from University and College Presidents

    Science.gov (United States)

    Havice, Pamela A.; Williams, Frankie K.

    2005-01-01

    This study investigated strategies used by college and university presidents in balancing their professional and personal lives. The conceptual framework for this study comes from the work of Schein (1985, 1992). Lessons learned and words of wisdom from these presidents can enhance leadership effectiveness at all levels in higher education.

  14. Combat Trauma Lessons Learned from Military Operations of 2001 - 2013

    Science.gov (United States)

    2015-03-09

    suspected tension pneumothorax  Longer needle for needle decompression  Lateral approach for needle decompression  Vented chest seals for open...Defense Health Board Combat Trauma Lessons Learned from Military Operations of 2001-2013 March 9, 2015 OFFICE OF THE ASSISTANT SECRETARY OF...

  15. Teaching about Terrorism: Lessons Learned at SWOTT

    Science.gov (United States)

    Miller, Gregory D.

    2009-01-01

    This article discusses some of the challenges and lessons for teaching undergraduate-level courses related to terrorism. The author outlines some of the primary issues that instructors can expect to face, and provides strategies for dealing with several of these challenges. The goal is to relay useful information to those teaching, or planning to…

  16. Jackie Steals Home. Learning Page Lesson Plan.

    Science.gov (United States)

    Pulda, Arnold

    In this lesson, students draw on their previous studies of American history and culture as they analyze primary sources from "Jackie Robinson and Other Baseball Highlights, 1860s-1960s" in the American Memory collection. A close reading of two documents relating to Jackie Robinson's breaking of the racial barrier in professional baseball…

  17. Lessons Learned from a Consultation Process Overseas

    Science.gov (United States)

    Merino-Soto, César

    2014-01-01

    In this commentary I discuss three international school consultation experiences, highlighting aspects that serve as lessons for professional development and the implementation of effective and helpful strategies that meet the needs of children and youth in school systems. Relationships developed and maintained between the consulting teams and the…

  18. Twain's "Hannibal." Learning Page Lesson Plan.

    Science.gov (United States)

    Wood, Jan; Thiese, Norma

    Writers are influenced by their environment including family, community, lifestyle, or location. One such writer was Mark Twain. With this lesson plan the learner will become familiar with and analyze life around Mark Twain's hometown, Hannibal, Missouri, during the latter half of the 19th century by using various online and print resources to…

  19. Hydrogen Fuel Cell Analysis: Lessons Learned from Stationary Power Generation Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Scott E. Grasman; John W. Sheffield; Fatih Dogan; Sunggyu Lee; Umit O. Koylu; Angie Rolufs

    2010-04-30

    This study considered opportunities for hydrogen in stationary applications in order to make recommendations related to RD&D strategies that incorporate lessons learned and best practices from relevant national and international stationary power efforts, as well as cost and environmental modeling of pathways. The study analyzed the different strategies utilized in power generation systems and identified the different challenges and opportunities for producing and using hydrogen as an energy carrier. Specific objectives included both a synopsis/critical analysis of lessons learned from previous stationary power programs and recommendations for a strategy for hydrogen infrastructure deployment. This strategy incorporates all hydrogen pathways and a combination of distributed power generating stations, and provides an overview of stationary power markets, benefits of hydrogen-based stationary power systems, and competitive and technological challenges. The motivation for this project was to identify the lessons learned from prior stationary power programs, including the most significant obstacles, how these obstacles have been approached, outcomes of the programs, and how this information can be used by the Hydrogen, Fuel Cells & Infrastructure Technologies Program to meet program objectives primarily related to hydrogen pathway technologies (production, storage, and delivery) and implementation of fuel cell technologies for distributed stationary power. In addition, the lessons learned address environmental and safety concerns, including codes and standards, and education of key stakeholders.

  20. Workshop report: "Using Social Media and Smartphone Applications in Practical Lessons to Enhance Student Learning" in Búzios, Brazil (August 6-8, 2017).

    Science.gov (United States)

    Lellis-Santos, Camilo; Halpin, Patricia A

    2018-06-01

    Cost-effective student engagement poses a challenge for instructors, especially those who may not be familiar with new technologies and mobile devices. In this workshop, participants, experienced and discussed two ways of using smartphones in physiology classes: to engage in an online learning environment for discussions, and to make physiological measurements. Participants signed up for individual Twitter accounts and learned how to tweet, retweet, message, use a URL shortener, and use hashtags. They then went on to locate articles on an assigned topic from the Twitter accounts of credible science sources ( American Journal of Physiology, The Scientist, CDC.gov, WHO.int) and applied their Twitter skills to discuss the science topic of current interest. Additionally, participants shared their knowledge about the use of smartphones as a tool for teaching; they discussed the foundations of smartphone-assisted learning and the concept of mobile-learning laboratories, which we refer to as MobLeLabs. Participants also performed an experiment that used an Axé dance video and smartphone applications to measure changes in heart rate and reaction time. Our report describes this international hands-on teaching workshop and highlights its outcomes.

  1. Lessons Learned from PR and PP Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Bley, D.C. [Buttonwood Consulting, Inc., 11738 English Mill Court, Oakton, VA 22124 (United States)

    2009-06-15

    The Generation-IV International Forum (GIF) working group on proliferation resistance and physical protection (PR and PP) has developed a methodology for evaluating the PR and PP effectiveness of Gen-IV nuclear energy systems. A number of applications studies culminating in the 2008-2009 Case Study have been helpful in developing the methodology, and in testing its ease of use and ability to provide useful information to designers and policy/decision makers. This paper examines the lessons learned from these studies. The applications studies evaluated a set of PR and PP measures for an 'Example Sodium Fast Reactor' (ESFR), a hypothetical design incorporating many features of anticipated Gen-IV energy systems. The objectives of the 2008- 2009 Case Study were to exercise the GIF PR and PP Methodology for a complete Gen-IV reactor/fuel cycle system; to demonstrate, via the comparison of different design options, that the methodology can generate meaningful results for designers and decision makers; to provide examples of PR and PP evaluations for future users; to facilitate transition to other studies; and to facilitate other ongoing collaborative efforts (e.g., INPRO) and associated efforts (e.g., GNEP). We will explain how the Case Study met these goals. PR Lessons Learned. We found that completeness in 'diversion' pathways can be ensured and that a set of diversion pathway segments can be developed along with proliferation resistance measures for each pathway. The examination of 'misuse' found that misuse, for achieving weapons-usable fissile material, is a complex process, i.e., it is not a single action on a single piece of equipment, but rather an integrated exploitation of various assets and system elements. We found that 'breakout' is a modifying strategy within the diversion and misuse threats and takes various forms that depend upon intent and aggressiveness, and ultimately the proliferation time assumed by a

  2. CEA's waste management policy and strategy. Lessons learned - 59201

    International Nuclear Information System (INIS)

    Dall'ava, Didier

    2012-01-01

    Document available in abstract form only. Full text of publication follows: Radioactive wastes are generated during operation as well as during the decontamination and dismantling of CEA's nuclear facility/installation. The safe and responsible management of radioactive wastes at all stages is an essential requirement of the regulatory system. The management covers the whole sequence of operations starting with the generation of waste and ending with its disposal. The disposal here means discarding of waste with no intention for retrieval. It is important to note here that the safety principles and practices that are applicable during the operational phase are also applicable during the decommissioning phase. As the radioactive waste arising is an inevitable outcome of decommissioning work, all the regulatory requirements associated with decommissioning remain in force in waste management. This presentation deals initially with the regulatory standards related to the management of wastes. As the management of radioactive wastes inevitably includes treatment and conditioning of wastes, following treatment and conditioning of wastes, storage, transportation and eventual disposal are the logical outcome of the radioactive wastes, processes are at any time improved based on the feedback experience and the lessons learned. (author)

  3. Lessons learned in terms of crisis management

    International Nuclear Information System (INIS)

    2006-01-01

    This document outlines that nobody was prepared to the crisis which occurred after the Chernobyl accident, whether in Russia, Europe or France. In order to illustrate the fact that crisis management has been different from one country to another, the report describes how the crisis has been managed in Norway (which has been quickly reached by fallouts and with a rather high level) and in Switzerland. It comments radioactivity measurements performed in France during spring 1986 by the SCPRI, the CEA and the ISPN. It discusses the lessons drawn in France in terms of emergency situation management regarding the protection of the population, crisis management, and the French post-accidental doctrine. It comments the lessons drawn in eastern European countries, with the cooperative implication of the IRSN. International projects are evoked: the Chernobyl Centre, the French-German Initiative, the European projects (EURANOS, NERIS, FARMING, STRATEGY, MOSES and SAMEN)

  4. Global polio eradication initiative: lessons learned and legacy.

    Science.gov (United States)

    Cochi, Stephen L; Freeman, Andrew; Guirguis, Sherine; Jafari, Hamid; Aylward, Bruce

    2014-11-01

    The world is on the verge of achieving global polio eradication. During >25 years of operations, the Global Polio Eradication Initiative (GPEI) has mobilized and trained millions of volunteers, social mobilizers, and health workers; accessed households untouched by other health initiatives; mapped and brought health interventions to chronically neglected and underserved communities; and established a standardized, real-time global surveillance and response capacity. It is important to document the lessons learned from polio eradication, especially because it is one of the largest ever global health initiatives. The health community has an obligation to ensure that these lessons and the knowledge generated are shared and contribute to real, sustained changes in our approach to global health. We have summarized what we believe are 10 leading lessons learned from the polio eradication initiative. We have the opportunity and obligation to build a better future by applying the lessons learned from GPEI and its infrastructure and unique functions to other global health priorities and initiatives. In so doing, we can extend the global public good gained by ending for all time one of the world's most devastating diseases by also ensuring that these investments provide public health dividends and benefits for years to come. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  5. Refueling Infrastructure for Alternative Fuel Vehicles: Lessons Learned for Hydrogen; Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, M. W.; McQueen, S.; Brinch, J.

    2008-07-01

    DOE sponsored the Refueling Infrastructure for Alternative Fuel Vehicles: Lessons Learned for Hydrogen workshop to understand how lessons from past experiences can inform future efforts to commercialize hydrogen vehicles. This report contains the proceedings from the workshop.

  6. Co-Creation Learning Procedures: Comparing Interactive Language Lessons for Deaf and Hearing Students.

    Science.gov (United States)

    Hosono, Naotsune; Inoue, Hiromitsu; Tomita, Yutaka

    2017-01-01

    This paper discusses co-creation learning procedures of second language lessons for deaf students, and sign language lessons by a deaf lecturer. The analyses focus on the learning procedure and resulting assessment, considering the disability. Through questionnaires ICT-based co-creative learning technologies are effective and efficient and promote spontaneous learning motivation goals.

  7. Lessons learnt from teachers' perspectives on mobile learning in ...

    African Journals Online (AJOL)

    Dumisani Jantjies

    2016-08-18

    Aug 18, 2016 ... multilingual mobile learning technology to support teaching and learning ..... study done, we had to submit an ethics application ..... mobile learning: A South African perspective. PhD thesis. England, UK: University of Warwick.

  8. Lessons from Learning to Have Rational Expectations

    OpenAIRE

    Lindh, Thomas

    1989-01-01

    This paper reviews a growing literature investigating how economic agents may learn rational expectations. Fully rational learning requires implausible initial information assumptions, therefore some form of bounded rationality has come into focus. Such learning models often converge to rational expectations equilibria within certain bounds. Convergence analysis has been much simplified by methods from adaptive control theory. Learning stability as a correspondence principle show some promise...

  9. Influences of Multimedia Lesson Contents On Effective Learning

    Directory of Open Access Journals (Sweden)

    Tuncay Yavuz Ozdemir

    2013-11-01

    Full Text Available In the information era that we experience today, there is a rapid change in the methods, techniques and materials used for education and teaching. The usage of information and communication technology-assisted teaching materials are becoming more commonplace. Parallel to these developments, the Ministry of National Education took steps to develop IT substructures of all schools in the country and implemented many projects. The purpose of this study is to determine whether or not the multimedia lesson content used by teachers affect effective learning. This study is a qualitative study, conducted with 45 teachers working in primary schools during the 2011-2012 academic year. According to the study findings, participants believe that using multimedia lesson content during lectures increases student motivation, makes students more curious and interested, and think that using multimedia lesson content has positive effects.

  10. Lessons learned from commercial experience with nuclear plant decontamination to safe storage

    International Nuclear Information System (INIS)

    Fischer, S.R.; Partain, W.L.; Sype, T.

    1995-01-01

    The Department of Energy (DOE) has successfully performed decontamination and decommissioning (D ampersand D) on many production reactors it. DOE now has the challenge of performing D ampersand D on a wide variety of other nuclear facilities. Because so many facilities are being closed, it is necessary to place many of them into a safe-storage status before conducting D ampersand D-for perhaps as much as 20 yr. The challenge is to achieve this safe-storage condition in a cost-effective manner while remaining in compliance with applicable regulations. The DOE Office of Environmental Management, Office of Transition and Management, commissioned a lessons learned study of commercial experience with safe storage and transition to D ampersand D. Although the majority of the commercial experience has been with reactors, many of the lessons learned presented in this paper are directly applicable to transitioning the DOE Weapons Complex

  11. Integrating self-regulated learning and discovery learning into English lesson plan

    Directory of Open Access Journals (Sweden)

    Sayukti Ni Kadek Heny

    2018-01-01

    Full Text Available The notion of learner-centeredness has been embedded in the National Curriculum of Indonesia, 2013 Curriculum. However, most of the teachers seem to be hardly acquainted with the concept of Self-Regulated Learning (SRL and discovery learning in the lesson planning. Considering the phenomenon, this study intends to explore the concept of Self-Regulated Learning in the lesson plan of English subject for a tenth-grade level by employing a qualitative design with data obtained from a teacher-made lesson plan and a semi-structured interview. The researcher used content analysis to analyze the lesson plan. Meanwhile, the qualitative data from interview result were preceded through a coding sheet and transcribed modified figure. The findings revealed an integration of SRL cyclical phase and discovery learning in the teacher-made lesson plan. Based on the discussion, the results need to be applied in a considerably large context, in order to see thoroughly dynamic integration between Self-Regulated Learning model, lesson planning and the concept of learner autonomy.

  12. Introducing Partnering in Denmark – Lessons Learned Applying Public Private Partnerships as an Innovation Platform

    DEFF Research Database (Denmark)

    Bonke, Sten; Olsen, Ib Steen

    as sustainability and economic welfare and prosperity in society. One approach to increasing the focus and rate of innovation processes is to facilitate closer interaction between at public and private companies targeting new thinking and innovation. This strategy characterises a Plan of Action, published...... work and 4)dissemination and implementation. Lessons learned through the experimental cases are discussed, and the applicability of PPP as an approach to innovation in construction is evaluated. Keywords: public private partnership, partnering, experimental projects, innovation process...

  13. Improving the quality of learning in science through optimization of lesson study for learning community

    Science.gov (United States)

    Setyaningsih, S.

    2018-03-01

    Lesson Study for Learning Community is one of lecturer profession building system through collaborative and continuous learning study based on the principles of openness, collegiality, and mutual learning to build learning community in order to form professional learning community. To achieve the above, we need a strategy and learning method with specific subscription technique. This paper provides a description of how the quality of learning in the field of science can be improved by implementing strategies and methods accordingly, namely by applying lesson study for learning community optimally. Initially this research was focused on the study of instructional techniques. Learning method used is learning model Contextual teaching and Learning (CTL) and model of Problem Based Learning (PBL). The results showed that there was a significant increase in competence, attitudes, and psychomotor in the four study programs that were modelled. Therefore, it can be concluded that the implementation of learning strategies in Lesson study for Learning Community is needed to be used to improve the competence, attitude and psychomotor of science students.

  14. Learning analytics dashboard applications

    NARCIS (Netherlands)

    Verbert, K.; Duval, E.; Klerkx, J.; Govaerts, S.; Santos, J.L.

    2013-01-01

    This article introduces learning analytics dashboards that visualize learning traces for learners and teachers. We present a conceptual framework that helps to analyze learning analytics applications for these kinds of users. We then present our own work in this area and compare with 15 related

  15. Lessons learned in testing of Safeguards equipment

    International Nuclear Information System (INIS)

    Pepper, Susan; Farnitano, Michael; Carelli, Joseph

    2001-01-01

    regime to ensure that all aspects of the equipment are fully functional. If problems exist it is better to know about them prior to implementation. This paper will discuss the results of the subtasks completed under Task E.125 and the progress of active subtasks. The cost/benefit of these subtasks will be addressed. Lessons learned by the U.S. Support Program in undertaking these tasks will be identified. (author)

  16. Safety and Mission Assurance for In-House Design Lessons Learned from Ares I Upper Stage

    Science.gov (United States)

    Anderson, Joel M.

    2011-01-01

    This viewgraph presentation identifies lessons learned in the course of the Ares I Upper Stage design and in-house development effort. The contents include: 1) Constellation Organization; 2) Upper Stage Organization; 3) Presentation Structure; 4) Lesson-Importance of Systems Engineering/Integration; 5) Lesson-Importance of Early S&MA Involvement; 6) Lesson-Importance of Appropriate Staffing Levels; 7) Lesson-Importance S&MA Team Deployment; 8) Lesson-Understanding of S&MA In-Line Engineering versus Assurance; 9) Lesson-Importance of Close Coordination between Supportability and Reliability/Maintainability; 10) Lesson-Importance of Engineering Data Systems; 11) Lesson-Importance of Early Development of Supporting Databases; 12) Lesson-Importance of Coordination with Safety Assessment/Review Panels; 13) Lesson-Implementation of Software Reliability; 14) Lesson-Implementation of S&MA Technical Authority/Chief S&MA Officer; 15) Lesson-Importance of S&MA Evaluation of Project Risks; 16) Lesson-Implementation of Critical Items List and Government Mandatory Inspections; 17) Lesson-Implementation of Critical Items List Mandatory Inspections; 18) Lesson-Implementation of Test Article Safety Analysis; and 19) Lesson-Importance of Procurement Quality.

  17. Lessons learned on the Ground Test Accelerator control system

    International Nuclear Information System (INIS)

    Kozubal, A.J.; Weiss, R.E.

    1994-01-01

    When we initiated the control system design for the Ground Test Accelerator (GTA), we envisioned a system that would be flexible enough to handle the changing requirements of an experimental project. This control system would use a developers' toolkit to reduce the cost and time to develop applications for GTA, and through the use of open standards, the system would accommodate unforeseen requirements as they arose. Furthermore, we would attempt to demonstrate on GTA a level of automation far beyond that achieved by existing accelerator control systems. How well did we achieve these goals? What were the stumbling blocks to deploying the control system, and what assumptions did we make about requirements that turned out to be incorrect? In this paper we look at the process of developing a control system that evolved into what is now the ''Experimental Physics and Industrial Control System'' (EPICS). Also, we assess the impact of this system on the GTA project, as well as the impact of GTA on EPICS. The lessons learned on GTA will be valuable for future projects

  18. Transboundary Movement of Radioactively Contaminated Scrap Metal - Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Nizamska, M., E-mail: m.nimzamska@bnra.bg [Emergency Planning and Preparedness Division, Bulgarian Nuclear Regulatory Agency, Sofia (Bulgaria)

    2011-07-15

    Starting in 1989, Bulgaria has undergone a comprehensive transformation of its economy and social conditions. Part of this process is related to the intensive privatization that started in 2001. This privatization included facilities, as well as sites that use radioactive material for different applications - industry, medicine, agriculture, science, etc. The rapid change of property ownership and, in some cases, the resulting bankruptcy, has caused difficulties in tracing and identifying radioactive sources and materials and a deterioration of the system of safety, physical protection, etc. of radioactive material. In some cases, radioactive sources were stolen because of the value of their protective containers and sold for scrap metal. This led to the occurrence of different types of radiation incidents, mainly related to the discovery of radioactive sources in scrap metal. The consequences of these incidents include the risk of radiation exposure of the workers at scrap metal yards or reprocessing facilities and of members of the public and, in addition, radioactive contamination of the environment. The Bulgarian Nuclear Regulatory Agency (BNRA) has been responding to these incidents and has carried out a series of measures to improve the control over materials (e.g. activated or surface contaminated materials) and radioactive sources and to strengthen the preventive, monitoring, emergency preparedness and mitigating measures at facility, national and transboundary levels. This paper presents an analysis of the lessons learned by the BNRA and of the control of the transboundary movement of radioactively contaminated scrap metal through the territory of Bulgaria. (author)

  19. Lessons learned from accidents in industrial irradiation facilities

    International Nuclear Information System (INIS)

    1996-01-01

    Use of ionizing radiation in medicine, industry and research for technical development continues to increase throughout the world. One application with a high growth rate is irradiation suing high energy gamma photons and electron beams. There are currently more than 160 gamma irradiation facilities and over 600 electron beam facilities in operation in almost all IAEA Member States. The most common uses of these facilities are to sterilize medical and pharmaceutical products, to preserve foodstuffs, to synthesize polymers and to eradicate insects. Although this industry has a good safety record, there is a potential for accidents with serious consequences to human health because of the high dose rates produced by these sources. Fatal accidents have occurred at installations in both developed and developing countries. Such accidents have prompted a review of several accidents, including five with fatalities, by a team of manufacturers, regulatory authorities and operating organizations. Having looked closely at the circumstances of each accident and the apparent deficiencies in design, safety and regulatory systems and personnel performance, the team made a number of recommendations on the ways in which the safety of irradiators can be improved. The findings of extensive research pertaining to the lessons that can be learned from irradiator accidents are presented. This publication is intended for manufacturers, regulatory authorities and operating organizations dealing with industrial irradiators. It was drafted by J.E. Glen, United States Nuclear Regulatory Commission, United States of America, and P. Zuniga-Bello, Consejo Nacional de Ciencia y Technologia, Mexico

  20. Lessons learned from accidents in radiotherapy. An IAEA Safety Report

    International Nuclear Information System (INIS)

    Ortiz, P.

    1998-01-01

    Radiotherapy is a very special application from the view point of protection because humans are deliberately exposed to high doses of radiation, and no physical barrier can be placed between the source and the patient. It deserves, therefore, special considerations from the point of view of potential exposure. An IAEA's Safety Report (in preparation) reviews a large collection of accident information, their initiating events and contributing factors, followed by a set of lessons learned and measures for prevention. The most important causes were: deficiencies in education and training, lack of procedures and protocols for essential tasks (such as commissioning, calibration, commissioning and treatment delivery), deficient communication and information transfer, absence of defence in depth and deficiencies in design, manufacture, testing and maintenance of equipment. Often a combination of more than one of these causes was present in an accident, thus pointing to a problem of management. Arrangements for a comprehensive quality assurance and accident prevention should be required by regulations and compliance be monitored by a Regulatory Authority. (author)

  1. Social Networking Sites and Addiction: Ten Lessons Learned

    Science.gov (United States)

    Kuss, Daria J.; Griffiths, Mark D.

    2017-01-01

    Online social networking sites (SNSs) have gained increasing popularity in the last decade, with individuals engaging in SNSs to connect with others who share similar interests. The perceived need to be online may result in compulsive use of SNSs, which in extreme cases may result in symptoms and consequences traditionally associated with substance-related addictions. In order to present new insights into online social networking and addiction, in this paper, 10 lessons learned concerning online social networking sites and addiction based on the insights derived from recent empirical research will be presented. These are: (i) social networking and social media use are not the same; (ii) social networking is eclectic; (iii) social networking is a way of being; (iv) individuals can become addicted to using social networking sites; (v) Facebook addiction is only one example of SNS addiction; (vi) fear of missing out (FOMO) may be part of SNS addiction; (vii) smartphone addiction may be part of SNS addiction; (viii) nomophobia may be part of SNS addiction; (ix) there are sociodemographic differences in SNS addiction; and (x) there are methodological problems with research to date. These are discussed in turn. Recommendations for research and clinical applications are provided. PMID:28304359

  2. License renewal demonstration program: NRC observations and lessons learned

    International Nuclear Information System (INIS)

    Prato, R.J.; Kuo, P.T.; Newberry, S.F.

    1996-12-01

    This report summarizes the Nuclear Regulatory Commission staff's observations and lessons learned from the five License Renewal Demonstration Program (LRDP) site visits performed by the staff from March 25, 1996, through August 16, 1996. The LRDP was a Nuclear Energy Institute (NEI) program intended to assess the effectiveness of the guidance provided by NEI 95-10, Revision 0, open-quotes Industry Guideline for Implementing the Requirements of 10 CFR Part 54 - The License Renewal Rule,close quotes to implement the requirements of Title 10 of the Code of Federal Regulations, Part 54 (10 CFR Part 54), open-quotes Requirements for Renewal of Operating Licenses for Nuclear Power Plants.close quotes In general, NEI 95-10 appeared to contain the basic guidance needed for scoping, screening, identifying aging effects, developing aging management programs, and performing time-limited aging analyses. However, inconsistent implementation of this guidance in some areas was an indication that clarification of existing guidance and/or the inclusion-of some new guidance may be needed for applicants to develop a license renewal program that is consistent with the intent of the rule

  3. Data quality objectives lessons learned for tank waste characterization

    International Nuclear Information System (INIS)

    Eberlein, S.J.

    1996-01-01

    The tank waste characterization process is an integral part of the overall effort to control the hazards associated with radioactive wastes stored in underground tanks at the Hanford Reservation. The programs involved in the characterization of the wastes are employing Data Quality Objective (DQO) process in all information and data collection activities. The DQO process is used by the programs to address an issue or problem rather than a specific sampling event. Practical limits do not always allow for precise characterization of a tank or the implementation of the DQO process. Because of the flexibility of the DQO process, it can be used as a tool for sampling and analysis of the underground waste storage tanks. The iterative nature of the DQO process allows it to be used as additional information is claimed or lessons are learned concerning an issue or problem requiring sampling and analysis of tank waste. In addition, the application of DQO process forces alternative actions to be considered when precise characterization of a tank or the full implementation of the DQO process is not practical

  4. Social Networking Sites and Addiction: Ten Lessons Learned

    Directory of Open Access Journals (Sweden)

    Daria J. Kuss

    2017-03-01

    Full Text Available Online social networking sites (SNSs have gained increasing popularity in the last decade, with individuals engaging in SNSs to connect with others who share similar interests. The perceived need to be online may result in compulsive use of SNSs, which in extreme cases may result in symptoms and consequences traditionally associated with substance-related addictions. In order to present new insights into online social networking and addiction, in this paper, 10 lessons learned concerning online social networking sites and addiction based on the insights derived from recent empirical research will be presented. These are: (i social networking and social media use are not the same; (ii social networking is eclectic; (iii social networking is a way of being; (iv individuals can become addicted to using social networking sites; (v Facebook addiction is only one example of SNS addiction; (vi fear of missing out (FOMO may be part of SNS addiction; (vii smartphone addiction may be part of SNS addiction; (viii nomophobia may be part of SNS addiction; (ix there are sociodemographic differences in SNS addiction; and (x there are methodological problems with research to date. These are discussed in turn. Recommendations for research and clinical applications are provided.

  5. Social Networking Sites and Addiction: Ten Lessons Learned.

    Science.gov (United States)

    Kuss, Daria J; Griffiths, Mark D

    2017-03-17

    Online social networking sites (SNSs) have gained increasing popularity in the last decade, with individuals engaging in SNSs to connect with others who share similar interests. The perceived need to be online may result in compulsive use of SNSs, which in extreme cases may result in symptoms and consequences traditionally associated with substance-related addictions. In order to present new insights into online social networking and addiction, in this paper, 10 lessons learned concerning online social networking sites and addiction based on the insights derived from recent empirical research will be presented. These are: (i) social networking and social media use are not the same; (ii) social networking is eclectic; (iii) social networking is a way of being; (iv) individuals can become addicted to using social networking sites; (v) Facebook addiction is only one example of SNS addiction; (vi) fear of missing out (FOMO) may be part of SNS addiction; (vii) smartphone addiction may be part of SNS addiction; (viii) nomophobia may be part of SNS addiction; (ix) there are sociodemographic differences in SNS addiction; and (x) there are methodological problems with research to date. These are discussed in turn. Recommendations for research and clinical applications are provided.

  6. Y2K lessons learned for electric grid stability

    International Nuclear Information System (INIS)

    Gueorguiev, B.; Ianev, I. L.; Purvis, E. E.

    2000-01-01

    Y2K was an example of a worldwide infrastructure threat. Actions to understand infrastructure risks and mitigate infrastructure threats are a continuing and increasing part of the worlds corporate, government, and international organizations systems, and the severe implications of infrastructure failures to the health, safety, and financial well being of people and organizations are the deriving force. The IAEA conducted a number of Y2K related activities in nuclear power and fuel cycle activities. A set of these activities address the interface between electric power generation facilities and electric power grids in the region of Eastern Europe and the countries of the former Soviet Union. This addressed a continuing infrastructure risks and actions to mitigate these risk. The results were shown by events to have made positive contributions. The potential loss of nuclear power plant generation is a significant risk to electric power grids, an important critical infrastructure. Not only does the threat constitute a problem with the potential loss of the grid, loss of the electric power grid increases the probability of accidents in nuclear power plants. Recognizing that these activities addressed only one area of infrastructure risk in one region, there are some key lessons that were learned that could have general applicability

  7. m-Health: Lessons Learned by m-Experiences

    Science.gov (United States)

    Bravo, José; Hervás, Ramón; González, Iván

    2018-01-01

    m-Health is an emerging area that is transforming how people take part in the control of their wellness condition. This vision is changing traditional health processes by discharging hospitals from the care of people. Important advantages of continuous monitoring can be reached but, in order to transform this vision into a reality, some factors need to be addressed. m-Health applications should be shared by patients and hospital staff to perform proper supervised health monitoring. Furthermore, the uses of smartphones for health purposes should be transformed to achieve the objectives of this vision. In this work, we analyze the m-Health features and lessons learned by the experiences of systems developed by MAmI Research Lab. We have focused on three main aspects: m-interaction, use of frameworks, and physical activity recognition. For the analysis of the previous aspects, we have developed some approaches to: (1) efficiently manage patient medical records for nursing and healthcare environments by introducing the NFC technology; (2) a framework to monitor vital signs, obesity and overweight levels, rehabilitation and frailty aspects by means of accelerometer-enabled smartphones and, finally; (3) a solution to analyze daily gait activity in the elderly, carrying a single inertial wearable close to the first thoracic vertebra. PMID:29762507

  8. Buried Waste Integrated Demonstration lessons learned: 1993 technology demonstrations

    International Nuclear Information System (INIS)

    Kostelnik, K.M.; Owens, K.J.

    1994-01-01

    An integrated technology demonstration was conducted by the Buried Waste Integrated Demonstration (BWID) at the Idaho National Engineering Laboratory Cold Test Pit in the summer of 1993. This program and demonstration was sponsored by the US Department of Energy Office of Technology Development. The demonstration included six technologies representing a synergistic system for the characterization and retrieval of a buried hazardous waste site. The integrated technology demonstration proved very successful and a summary of the technical accomplishments is presented. Upon completion of the integrated technology demonstration, cognizant program personnel participated in a lessons learned exercise. This exercise was conducted at the Simplot Decision Support Center at Idaho State University and lessons learned activity captured additional information relative to the integration of technologies for demonstration purposes. This information will be used by BWID to enhance program planning and strengthen future technology demonstrations

  9. Wikiwijs: An unexpected journey and the lessons learned towards OER

    Directory of Open Access Journals (Sweden)

    Robert Schuwer

    2014-04-01

    Full Text Available The Dutch Ministry of Education, Culture and Science has funded a five years program to encourage the use, creation and sharing of Open Educational Resources (OER by teachers from various types of education. This program is known as Wikiwijs. Ultimo 2013, the program has come to an end. As some of the assumptions at the start of Wikiwijs proved to work out in unexpected ways the lessons learned could fuel the next steps in developing Wikiwijs. Besides, other national initiatives on opening up education may also benefit from the lessons learned reported here. The main conclusion from five years Wikiwijs was that to accomplish mainstreaming OER, the Wikiwijs program should go along with other interventions that are more oriented toward prescriptive policies and regulations. In particular: the Dutch government should be more directive in persuading executive boards and teachers on schools to adopt OER as an important part of educational reform and the acquisition of 21st century skills.

  10. LESSONS LEARNED Biosurveillance Mobile App Development Intern Competition (Summer 2013)

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, Christine F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Henry, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corley, Courtney D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-01-14

    The purpose of the lessons learned document for the BEOWulf Biosurveillance Mobile App Development Intern Competition is to capture the project’s lessons learned in a formal document for use by other project managers on similar future projects. This document may be used as part of new project planning for similar projects in order to determine what problems occurred and how those problems were handled and may be avoided in the future. Additionally, this document details what went well with the project and why, so that other project managers may capitalize on these actions. Project managers may also use this document to determine who the project team members were in order to solicit feedback for planning their projects in the future. This document will be formally communicated with the organization and will become a part of the organizational assets and archives.

  11. QA lessons learned for parameter control from the WIPP Project

    International Nuclear Information System (INIS)

    Richards, R.R.

    1998-01-01

    This paper provides a summary of lessons learned from experiences on the Waste Isolation Pilot Plant (WJPP) Project in implementation of quality assurance controls surrounding inputs for performance assessment analysis. Since the performance assessment (PA) process is inherent in compliance determination for any waste repository, these lessons-learned are intended to be useful to investigators, analysts, and Quality Assurance (QA) practitioners working on high level waste disposal projects. On the WIPP Project, PA analyses for regulatory-compliance determination utilized several inter-related computer programs (codes) that mathematically modeled phenomena such as radionuclide release, retardation, and transport. The input information for those codes are the parameters that are the subject of this paper. Parameters were maintained in a computer database, which was then queried electronically by the PA codes whenever input was needed as the analyses were run

  12. E-LEARNING FROM NATURE THROUGH E-LESSONS

    Directory of Open Access Journals (Sweden)

    Anca Cristina COLIBABA

    2017-08-01

    Full Text Available The article is a study based on the e-Learning from Nature project (2015-1-IT02-KA201-015133 funded by the European Commission. The project’s main objectives are centred on improving students’ low achievement and stimulating secondary school students’ interest in science subjects. The article focuses on scientific education and its challenges and suggests an innovative approach which connects science with nature. It examines one of the most important project outputs: the e-lessons (short video lessons created within the European partnership and the way they can contribute to increasing students’ motivation to learn science. Participant teachers’ testimonials have also been considered in the general evaluation of this project output.

  13. Learning in Plants: Lessons from Mimosa pudica

    Directory of Open Access Journals (Sweden)

    Charles Ira Abramson

    2016-03-01

    Full Text Available This article provides an overview of the early Mimosa pudica literature; much of which is in journals not easily accessible to the reader. In contrast to the contemporary plant learning literature which is conducted primarily by plant biologists, this early literature was conducted by comparative psychologists whose goal was to search for the generality of learning phenomena such as habituation, and classical conditioning using experimental designs based on animal conditioning studies. In addition to reviewing the early literature, we hope to encourage collaborations between plant biologists and comparative psychologists by familiarizing the reader with issues in the study of learning faced by those working with animals. These issues include no consistent definition of learning phenomena and an overreliance on the use of cognition. We suggested that greater collaborative efforts be made between plant biologists and comparative psychologists if the study of plant learning is to be fully intergraded into the mainstream behavior theory.

  14. Reactor D and D at Argonne National Laboratory - lessons learned

    International Nuclear Information System (INIS)

    Fellhauer, C. R.

    1998-01-01

    This paper focuses on the lessons learned during the decontamination and decommissioning (D and D) of two reactors at Argonne National Laboratory-East (ANL-E). The Experimental Boiling Water Reactor (EBWR) was a 100 MW(t), 5 MSV(e) proof-of-concept facility. The Janus Reactor was a 200 kW(t) reactor located at the Biological Irradiation Facility and was used to study the effects of neutron radiation on animals

  15. Development of an HIV Prevention Videogame: Lessons Learned

    OpenAIRE

    Kimberly Hieftje; Lynn E. Fiellin; Tyra Pendergrass; Lindsay R Duncan

    2016-01-01

    The use of videogames interventions is becoming an increasingly popular and effective strategy in disease prevention and health promotion; however, few health videogame interventions have been scientifically rigorously evaluated for their efficacy. Moreover, few examples of the formative process used to develop and evaluate evidence-based health videogame interventions exist in the scientific literature. The following paper provides valuable insight into the lessons learned during the process...

  16. Creating the High-Resolution Settlement Layer - lessons learned

    Science.gov (United States)

    Gros, A.

    2017-12-01

    Facebook publishes the High-resolution Settlement Layer (HRSL: https://ciesin.columbia.edu/data/hrsl/) in collaboration with Columbia University's CIESIN institute and the World Bank. So far, data for 13 countries have been published over the past nine months. HRSL data for Burkina Faso, Ghana, Haiti, Ivory Coast, Madagascar, Malawi, Mexico, The Philippines, Rwanda, South Africa, Sri Lanka, Thailand, and Uganda are available for download. We will present a status update and report on lessons learned.

  17. Savannah River Site environmental restoration lessons learned program

    International Nuclear Information System (INIS)

    Plunkett, R.A.; Leibfarth, E.C.; Treger, T.M.; Blackmon, A.M.

    1993-01-01

    For the past three years environmental restoration has been formally consolidated at Savannah River Site. Accomplishments include waste site investigations to closure activities. Positive, as well as negatively impacting, events have occurred. Until recently, lessons learned were captured on a less than formal basis. Now, a program based upon critiques, evaluations and corrective actions is being used. This presentation reviews the development, implementation and use of that program

  18. Social Networking Sites and Addiction: Ten Lessons Learned

    OpenAIRE

    Kuss, Daria J.; Griffiths, Mark D.

    2017-01-01

    Online social networking sites (SNSs) have gained increasing popularity in the last decade, with individuals engaging in SNSs to connect with others who share similar interests. The perceived need to be online may result in compulsive use of SNSs, which in extreme cases may result in symptoms and consequences traditionally associated with substance-related addictions. In order to present new insights into online social networking and addiction, in this paper, 10 lessons learned concerning onl...

  19. Evaluation of a potential nuclear fuel repository criticality: Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, J.R.; Evans, D.

    1995-10-01

    This paper presents lessons learned from a Probabilistic Risk Assessment (PRA) of the potential for a criticality in a repository containing spent nuclear fuel with high enriched uranium. The insights gained consisted of remarkably detailed conclusions about design issues, failure mechanisms, frequencies and source terms for events up to 10,000 years in the future. Also discussed are the approaches taken by the analysts in presenting this very technical report to a nontechnical and possibly antagonistic audience.

  20. Lessons learned in the accident of contamination with Pu-239

    International Nuclear Information System (INIS)

    Molina, G.; Ruiz C, M.; Angeles C, A.; Benitez S, J.A.

    2004-01-01

    This work describes the lessons learned during the accident by transuranic contamination in the National Institute of Nuclear Research happened between 1998 and 2003. The origin of the same one is the not authorized transfer of 0.51 g of plutonium metallic used as pattern source in the Department of Metrology to a laboratory which lacked of physical infrastructure, training and team to manipulate this source. (Author)

  1. Evaluation of a potential nuclear fuel repository criticality: Lessons learned

    International Nuclear Information System (INIS)

    Wilson, J.R.; Evans, D.

    1995-01-01

    This paper presents lessons learned from a Probabilistic Risk Assessment (PRA) of the potential for a criticality in a repository containing spent nuclear fuel with high enriched uranium. The insights gained consisted of remarkably detailed conclusions about design issues, failure mechanisms, frequencies and source terms for events up to 10,000 years in the future. Also discussed are the approaches taken by the analysts in presenting this very technical report to a nontechnical and possibly antagonistic audience

  2. Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

    International Nuclear Information System (INIS)

    Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

    2016-01-01

    The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

  3. Lessons learned in wake of WPPSS

    International Nuclear Information System (INIS)

    Koenen, A.V.; Gillespie, J.W.

    1984-01-01

    Several fundamentals of public power financial management have become more critical in the wake of the Washington Public Power Supply System (WPPSS) default: the human and financial costs of trying to resolve problems of this complexity after they occur will require an almost unimaginable amount of time and money that could be productively employed elsewhere; the economic feasibility of the project is paramount, and is far more important than its legal security or its attractiveness to utility managers; the ratepayers' ability and willingness to pay is the key security in public power financing; management performance, not promises, will be the measure of the post WPPSS marketplace; financial flexibility is crucial. Using these lessons, the author outlines a five-step program of strategic planning for planning and managing long-term projects

  4. Case Study of Lessons Learned from the Operation of the Fast Flux Test Facility

    International Nuclear Information System (INIS)

    Wootan, D.; Omberg, R.; Grandy, C.

    2016-01-01

    Full text: The lessons learned approach being followed at the Fast Flux Test Facility is to have domain experts in each subject area develop a short write-up or report on each lesson learned. Each lesson learned write-up is on the order of 4–6 pages. Longer reports can be developed as needed. Each lessons learned summary discusses the problem and the resolution method employed to address the problem, and also tries to capture the essential “tacit knowledge” associated with each topic in a focused manner. All lessons learned write-ups are supported by more detailed documents. For example, references of more detailed reports are generally included, where available. Topics are selected as those most likely to apply to future design or operating problems. This lessons learned approach has been successful in capturing essential tacit knowledge about key events in FFTF history and providing a context for interpreting the existing data and references. (author

  5. LESSONS LEARNED THROUGH OPTIMIZATION OF THE VOLUNTARY CORRECTIVE ACTION PROCESS

    International Nuclear Information System (INIS)

    Thacker, M. S.; Freshour, P.; McDonald, W.

    2002-01-01

    Valuable experience in environmental remediation was gained at Sandia National Laboratories/New Mexico (Sandia) by concurrently conducting Voluntary Corrective Actions (VCAs) at three Solid Waste Management Units (SWMUs). Sandia combined the planning, implementation, and reporting phases of three VCAs with the goal of realizing significant savings in both cost and schedule. The lessons learned through this process have been successfully implemented within the Sandia Environmental Restoration (ER) Project and could be utilized at other locations with multiple ER sites. All lessons learned resulted from successful teaming with the New Mexico Environment Department (NMED) Hazardous Waste Bureau (HWB), Sandia management, a Sandia risk assessment team, and Sandia waste management personnel. Specific lessons learned included the following: (1) potential efficiencies can be exploited by reprioritization and rescheduling of activities; (2) cost and schedule reductions can be realized by combining similar work at contiguous sites into a single effort; (3) working with regulators to develop preliminary remediation goals (PRGs) and gain regulatory acceptance for VCA planning prior to project initiation results in significant time savings throughout the remediation and permit modification processes; (4) effective and thoughtful contingency planning removes uncertainties and defrays costs so that projects can be completed without interruption; (5) timely collection of waste characterization samples allows efficient disposal of waste streams, and (6) concurrent reporting of VCA activities results in significant savings in time for the authors and reviewers

  6. Automated Reasoning Across Tactical Stories to Derive Lessons Learned

    Directory of Open Access Journals (Sweden)

    J. Wesley Regian

    2008-06-01

    Full Text Available The Military Analogical Reasoning System (MARS is a performance support system and decision aid for commanders in Tactical Operations Centers. MARS enhances and supports the innate human ability for using stories to reason about tactical goals, plans, situations, and outcomes. The system operates by comparing many instances of stored tactical stories, determining which have analogous situations and lessons learned, and then returning a description of the lessons learned. The description of the lessons learned is at a level of abstraction that can be generalized to an appropriate range of tactical situations. The machine-understandable story representation is based on a military operations data model and associated tactical situation ontology. Thus each story can be thought of, and reasoned about, as an instance of an unfolding tactical situation. The analogical reasoning algorithm is based on Gentner's Structure Mapping Theory. Consider the following two stories. In the first, a U.S. platoon in Viet Nam diverts around a minefield and subsequently comes under ambush from a large hill overlooking their new position. In the second, a U.S. task force in Iraq diverts around a biochemical hazard and subsequently comes under ambush from the roof of an abandoned building. MARS recognizes these stories as analogical, and derives the following abstraction: When enemy-placed obstacles force us into an unplanned route, beware of ambush from elevation or concealment. In this paper we describe the MARS interface, military operations data model, tactical situation ontology, and analogical reasoning algorithm.

  7. Worldwide Overview of Lessons Learned from Decommissioning Projects

    International Nuclear Information System (INIS)

    Laraia, Michele

    2008-01-01

    With an increasing number of radioactive facilities and reactors now reaching the end of their useful life and being taken out of service, there is a growing emphasis worldwide on the safe and efficient decommissioning of such plants. There is a wealth of experience already gained in decommissioning projects for all kinds of nuclear facilities. It is now possible to compare and discuss progress and accomplishments worldwide. In particular, rather than on the factual descriptions of projects, technologies and case histories, it is important to focus on lessons learned: in this way, the return of experience is felt to effectively contribute to progress. Key issues - inevitably based on a subjective ranking - are presented in this paper. Through the exchange of lessons learned, it is possible to achieve full awareness of the need for resources for and constraints of safe and cost-effective decommissioning. What remains now is the identification of specific, remaining issues that may hinder or delay the smooth progress of decommissioning. To this end, lessons learned provide the necessary background information; this paper tries to make extensive use of practical experience gained by the international community

  8. Reflections on Designing a MPA Service-Learning Component: Lessons Learned

    Science.gov (United States)

    Roman, Alexandru V.

    2015-01-01

    This article provides the "lessons learned" from the experience of redesigning two sections (face-to-face and online) of a core master of public administration class as a service-learning course. The suggestions made here can be traced to the entire process of the project, from the "seed idea" through its conceptualization and…

  9. Experiential Learning: Lessons Learned from the UND Business and Government Symposium

    Science.gov (United States)

    Harsell, Dana Michael; O'Neill, Patrick B.

    2010-01-01

    The authors describe lessons learned from a limited-duration experiential learning component of a Master's level course. The course is open to Master's in Business and Master's in Public Administration students and explores the relationships between government and business. A complete discussion of the Master's in Business and Master's in Public…

  10. A summary of lessons learned activities conducted at the OECD Halden Reactor Project

    International Nuclear Information System (INIS)

    Hallbert, B.P.

    1997-01-01

    A series of lessons learned studies have been conducted at the OECD Halden Reactor Project. The purpose of these lessons learned reports are to summarize knowledge and experience gained across a number of research project. This paper presents a summary of main issues addressed in four of these lessons learned projects. These are concerned with software development and quality assurance, software reliability, methods for test and evaluation of developed systems, and the evaluation of system design features

  11. Lessons learned implementing environmental regulations at non-Department of Energy sites

    International Nuclear Information System (INIS)

    Craig, R.B.; Dippo, G.L.

    1991-01-01

    The Hazardous Waste Remedial Actions Program (HAZWRAP) has been involved in the implementation of environmental regulations at non-Department of Energy (DOE) facilities for > 5 years. If any common thread has been identified in working at these sites, it is that no two sites can be treated the same. Each site and its associated wastes, governing regulations, and environmental conditions are different. The list of technical lessons learned is long, and their applicability to other sites must be looked at for each specific case. That is far too large a task to undertake here. The most important lesson HAZWRAP learned is not technical. Implementing environmental regulations at non-DOE sites is not any different from implementing regulations or anything else done at DOE facilities. The key to success lies in quality, planning, and communication. Taking the time to implement a good quality program based on sound planning and open communication will ensure program success

  12. Head and neck trauma in Iraq and Afghanistan: different war, different surgery, lessons learned.

    Science.gov (United States)

    Brennan, Joseph

    2013-10-01

    The objectives are to compare and contrast the head and neck trauma experience in Iraq and Afghanistan and to identify trauma lessons learned that are applicable to civilian practice. A retrospective review of one head and neck surgeon's operative experience in Iraq and Afghanistan was performed using operative logs and medical records. The surgeon's daily operative log book with patient demographic data and operative reports was reviewed. Also, patient medical records were examined to identify the preoperative and postoperative course of care. The head and neck trauma experiences in Iraq and Afghanistan were very different, with a higher percentage of emergent cases performed in Iraq. In Iraq, only 10% of patients were pretreated at a facility with surgical capabilities. In Afghanistan, 93% of patients were pretreated at such facilities. Emergent neck exploration for penetrating neck trauma and emergent airway surgery were more common in Iraq, which most likely accounted for the increased perioperative mortality also seen in Iraq (5.3% in Iraq vs. 1.3% in Afghanistan). Valuable lessons regarding soft tissue trauma repair, midface fracture repair, and mandible fracture repair were learned. The head and neck trauma experiences in Iraq and Afghanistan were very different, and the future training for mass casualty trauma events should reflect these differences. Furthermore, valuable head and neck trauma lessons learned in both war zones are applicable to the civilian practice of trauma. Level 4. Copyright © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

  13. Lessons learned in communicating nuclear transportation issues - a case study

    International Nuclear Information System (INIS)

    Reilly, B.; Austin, P.

    1992-01-01

    Successful communication requires several key elements. They include a non-intimidating forum for exchanging information, two-way communication, advance preparation to identify what each party wants to learn, and feedback. There is no single approach that guarantees success. Factors such as technical complexity of the issue, level of support by the public, and trust and confidence among the parties all play a role in determining the most workable approach for any particular situation. This paper illustrates lessons learned by the US Department of Energy (DOE) in communicating nuclear waste disposal and transportation issues to the public

  14. Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, M.D.; Fencl, A.F.; Newton, G.J. [and others

    1995-12-01

    Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will {open_quotes}help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.{close_quotes} Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of {open_quotes}lessons learned{close_quotes} training materials for facility designers, managers, health protection professionals, line supervisors, and workers.

  15. Impact of the Implementation of Information Technology on the Center for Army Lessons Learned

    National Research Council Canada - National Science Library

    Wizner, Anthony

    2001-01-01

    .... This research evaluates the impact that the implementation of an Information Technology infrastructure has had on the efficiency of Army's Lessons Learned Process and the overall effectiveness...

  16. The learning teacher in a collaborative lesson study team within the context of mathematics

    NARCIS (Netherlands)

    Goei, Sui Lin; Verhoef, Neeltje Cornelia

    2015-01-01

    This paper summarises results of two studies on teachers’ learning when participating in a collaborative Lesson Study team within the context of mathematics teaching. In study one, Lesson Study was used in the classic way of preparing, designing, executing and reflecting on the research lesson.

  17. Involvement in Learning Revisited: Lessons We Have Learned.

    Science.gov (United States)

    Astin, Alexander W.

    1996-01-01

    Discusses interconnections between the following two national reports: (1) Involvement in Learning; and (2) The Student Learning Imperative. Reviews recent research on student development in order to demonstrate how student affairs professionals can use this information to enhance learning. (SNR)

  18. Chinese haze versus Western smog: lessons learned.

    Science.gov (United States)

    Zhang, Junfeng Jim; Samet, Jonathan M

    2015-01-01

    Air pollution in many Chinese cities has been so severe in recent years that a special terminology, the "Chinese haze", was created to describe China's air quality problem. Historically, the problem of Chinese haze has developed several decades after Western high-income countries have significantly improved their air quality from the smog-laden days in the early- and mid-20(th) century. Hence it is important to provide a global and historical perspective to help China combat the current air pollution problems. In this regard, this article addresses the followings specific questions: (I) What is the Chinese haze in comparison with the sulfurous (London-type) smog and the photochemical (Los Angeles-type) smog? (II) How does Chinese haze fit into the current trend of global air pollution transition? (III) What are the major mitigation measures that have improved air quality in Western countries? and (IV) What specific recommendations for China can be derived from lessons and experiences from Western countries?

  19. Transradial access: lessons learned from cardiology.

    Science.gov (United States)

    Snelling, Brian M; Sur, Samir; Shah, Sumedh Subodh; Marlow, Megan M; Cohen, Mauricio G; Peterson, Eric C

    2018-05-01

    Innovations in interventional cardiology historically predate those in neuro-intervention. As such, studying trends in interventional cardiology can be useful in exploring avenues to optimise neuro-interventional techniques. One such cardiology innovation has been the steady conversion of arterial puncture sites from transfemoral access (TFA) to transradial access (TRA), a paradigm shift supported by safety benefits for patients. While neuro-intervention has unique anatomical challenges, the access itself is identical. As such, examining the extensive cardiology literature on the radial approach has the potential to offer valuable lessons for the neuro-interventionalist audience who may be unfamiliar with this body of work. Therefore, we present here a report, particularly for neuro-interventionalists, regarding the best practices for TRA by reviewing the relevant cardiology literature. We focused our review on the data most relevant to our audience, namely that surrounding the access itself. By reviewing the cardiology literature on metrics such as safety profiles, cost and patient satisfaction differences between TFA and TRA, as well as examining the technical nuances of the procedure and post-procedural care, we hope to give physicians treating complex cerebrovascular disease a broader data-driven understanding of TRA. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Lessons Learned from One-to-One

    Science.gov (United States)

    McLester, Susan

    2011-01-01

    When in 2002 Maine launched its pioneering Maine Learning Technology Initiative (MLTI) that equipped every one of the state's 30,000 seventh- and eighth-grade public school students and teachers with their own Apple iBook, all eyes were on the endeavor. As the first statewide one-to-one deployment, MLTI's $37 million education experiment…

  1. Lessons learned from the Apple stores.

    Science.gov (United States)

    Pinkney, Henry; Baum, Neil

    2012-01-01

    Medical practices have an opportunity to improve the services that they offer their patients. Practices can look at other businesses and industries for examples of outstanding customer service. This article will discuss the services provided by Apple, Inc., and how medical practices can learn from this industry giant and improve the services that they offer patients.

  2. Lessons learned about ageing and gerontological nursing in South Africa

    Directory of Open Access Journals (Sweden)

    Staja Q. Booker

    2015-07-01

    Full Text Available Background: The unprecedented global growth in older adults merits high-quality gerontological nursing care. As gerontological nursing grows in visibility in developed and developing countries, nurses must possess a broader worldview of ageing with knowledge of physiological, psychosocial, and cultural issues. Purpose: The purpose of this article is to: (1 highlight lessons learned on differences and similarities in ageing and care of older adults in the United States of America (USA and South Africa (SA; and (2 provide recommendations on how to advance gerontological nursingeducation in SA. Methods: A two-week international service-learning project was undertaken by visiting SA and learning about their nursing system and care of older adults. Service-learning is an innovative teaching-learning-service method that provided reflective and hands-on experience of gerontological nursing. This article provides a personal reflection of lessons learned about ageing and gerontological nursing during the service-learning project. Findings: Care of older adults in SA is in many ways different from and similar to that in the USA. Consequently global nurses should recognise those differences and provide culturally appropriate care. This service-learning experience also demonstrated the need for gerontological nursing education in SA. Based on this, recommendations on how to infuse and advance gerontological nursing education in SA are provided. Conclusion: Caring for older adults in a global context requires knowledge and understanding of cultures and their values and practices. With a growing population of diverse older adults, there is a need for incorporation

  3. Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

    International Nuclear Information System (INIS)

    Hoover, M.D.; Fencl, A.F.; Newton, G.J.

    1995-01-01

    Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will open-quotes help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.close quotes Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of open-quotes lessons learnedclose quotes training materials for facility designers, managers, health protection professionals, line supervisors, and workers

  4. Energy market reform - lessons learned and next steps

    International Nuclear Information System (INIS)

    Doucet, G.

    2004-01-01

    This presentation will be based on the World Energy Council's recently published report, Energy Market Reform: Lessons Learned and Next Steps with Special Emphasis on the Energy Access Problems of Developing Countries. The report draws on practical lessons from past studies carried out by the World Energy Council and on current experiences on the desirable architecture of market reforms in electricity and natural gas. The approach of the study was not to further deepen the analysis or to provide technical recommendations but rather, to build a debate guided by the common thread of energy security and end-user e mpowerment , highlighting the possible areas of conflict of interest and the broad solutions that might be chosen depending on the local circumstances for different parts of the energy chains. The ambition was to identify key concerns and to initiate a debate on possible answers.(author)

  5. Placing Human Behavior at the Center of the Fight to Eradicate Polio: Lessons Learned and Their Application to Other Life-Saving Interventions.

    Science.gov (United States)

    Guirguis, Sherine; Obregon, Rafael; Coleman, Michael; Hickler, Benjamin; SteelFisher, Gillian

    2017-07-01

    Today, acceptance of oral polio vaccine is the highest ever. Reaching this level of acceptance has depended on decades of engaging with communities, building trust amid extraordinary social contexts, and responding to the complex variables that trigger behavioral and social change. Drawing on both the successes and setbacks in the 28 years of the Global Polio Eradication Initiative (GPEI), this article articulates what happened when the GPEI began to pay more attention to the dynamics of human and social behavior change. Three particular lessons for other health and immunization programs can be drawn from the experience of GPEI: change begins from within (ie, success needs institutional recognition of the importance of human behavior), good data are not enough for good decision-making, and health workers are important agents of behavior change. These lessons should be harnessed and put into practice to build demand and trust for the last stages of polio eradication, as well as for other life-saving health interventions. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

  6. Improving the primary school science learning unit about force and motion through lesson study

    Science.gov (United States)

    Phaikhumnam, Wuttichai; Yuenyong, Chokchai

    2018-01-01

    The study aimed to develop primary school science lesson plan based on inquiry cycle (5Es) through lesson study. The study focused on the development of 4 primary school science lesson plans of force and motion for Grade 3 students in KKU Demonstration Primary School (Suksasart), first semester of 2015 academic year. The methodology is mixed method. The Inthaprasitha (2010) lesson study cycle was implemented in group of KKU Demonstration Primary School. Instruments of reflection of lesson plan developing included participant observation, meeting and reflection report, lesson plan and other document. The instruments of examining students' learning include classroom observation and achievement test. Data was categorized from these instruments to find the issues of changing and improving the good lesson plan of Thai primary school science learning. The findings revealed that teachers could develop the lesson plans through lesson study. The issues of changing and improving were disused by considering on engaging students related to societal issues, students' prior knowledge, scientific concepts for primary school students, and what they learned from their changing. It indicated that the Lesson Study allowed primary school science teachers to share ideas and develop ideas to improve the lesson. The study may have implications for Thai science teacher education through Lesson Study.

  7. The 2015 Nepal earthquake disaster: lessons learned one year on.

    Science.gov (United States)

    Hall, M L; Lee, A C K; Cartwright, C; Marahatta, S; Karki, J; Simkhada, P

    2017-04-01

    The 2015 earthquake in Nepal killed over 8000 people, injured more than 21,000 and displaced a further 2 million. One year later, a national workshop was organized with various Nepali stakeholders involved in the response to the earthquake. The workshop provided participants an opportunity to reflect on their experiences and sought to learn lessons from the disaster. One hundred and thirty-five participants took part and most had been directly involved in the earthquake response. They included representatives from the Ministry of Health, local and national government, the armed forces, non-governmental organizations, health practitioners, academics, and community representatives. Participants were divided into seven focus groups based around the following topics: water, sanitation and hygiene, hospital services, health and nutrition, education, shelter, policy and community. Facilitated group discussions were conducted in Nepalese and the key emerging themes are presented. Participants described a range of issues encountered, some specific to their area of expertize but also more general issues. These included logistics and supply chain challenges, leadership and coordination difficulties, impacts of the media as well as cultural beliefs on population behaviour post-disaster. Lessons identified included the need for community involvement at all stages of disaster response and preparedness, as well as the development of local leadership capabilities and community resilience. A 'disconnect' between disaster management policy and responses was observed, which may result in ineffective, poorly planned disaster response. Finding time and opportunity to reflect on and identify lessons from disaster response can be difficult but are fundamental to improving future disaster preparedness. The Nepal Earthquake National Workshop offered participants the space to do this. It garnered an overwhelming sense of wanting to do things better, of the need for a Nepal-centric approach

  8. The California experience : lessons learned and prospects for the future

    Energy Technology Data Exchange (ETDEWEB)

    Levin, J. [AC Transit, Oakland, CA (United States)

    2007-07-01

    AC Transit operates 650 hydrogen-powered mass transit buses that serve 1.5 million people in 13 cities in California. This presentation discussed the impact of the buses on public health, quality of life and cost savings. Hydrogen has been touted as a diversified and renewable energy supply that can provide energy independence and reduction in global warming. Mass transit systems have proven to be well suited for testing the limits of hydrogen-powered vehicles primarily because of the centralized fueling and maintenance structure. AC Transit began ZEbus testing in November 1999 and became involved in the California Fuel Cell Partnership in 2000. The NeBus test was performed in 2000, followed by the ISE/UTC Thor Bus in 2003/2004. The governor's inauguration of the zero emission buses was in January 2007. The lessons learned from the California experience were: (1) motivation must be for the right reason, (2) a champion is required, (3) community and political support is required, (4) capital investment is required, (5) a strong management team is required, (6) partners must be chosen wisely, (7) the end user or customer must be allowed to drive the design, (8) inform the public about plans, (9) evaluation is essential to industry-wide application, (10) all resources must be considered for outreach and education, (11) optimism is required to surpass challenges, (12) the technology should be promoted for future generations. The presentation concluded with comments on market value of hydrogen and fuel cell vehicles, their fuel efficiency, reliability and durability. tabs., figs.

  9. Breastfeeding social marketing: lessons learned from USDA's "Loving Support" campaign.

    Science.gov (United States)

    Pérez-Escamilla, Rafael

    2012-10-01

    Social marketing involves the application of commercial marketing principles to advance the public good. Social marketing calls for much more than health communications campaigns. It involves four interrelated tasks: audience benefit, target behavior, essence (brand, relevance, positioning), and developing the "4Ps" (product, price, place, promotion) marketing mix. The ongoing U.S. Department of Agriculture "Loving Support Makes Breastfeeding Work" campaign was launched in 1997 based on social marketing principles to increase breastfeeding initiation rates and breastfeeding duration among Special Supplemental Nutrition Program for Women, Infants and Children (WIC) participants. Since then there have been improvements in breastfeeding duration in the country, and the majority of WIC women now initiate breastfeeding. Breastfeeding in public places is still not well accepted by society at large, and any and exclusive breastfeeding durations remain exceedingly low. Lessons learned from "Loving Support" and other campaigns indicate that it is important to design social marketing campaigns to target the influential societal forces (e.g., family and friends, healthcare providers, employers, formula industry, legislators) that affect women's decision and ability to breastfeed for the recommended amount of time. This will require formative research that applies the social-ecological model to different population segments, taking and identifying the right incentives to nudge more women to breastfeed for longer. Any new breastfeeding campaign needs to understand and take into account the information acquisition preferences of the target audiences. The vast majority of WIC women have mobile devices and are accessing social media. The Brazilian experience indicates that making breastfeeding the social norm can be done with a solid social marketing strategy. This is consistent with the recently released "Six Steps to Achieve Breastfeeding Goals for WIC Clinics," which identifies

  10. The roles of lesson study in the development of mathematics learning instrument based on learning trajectory

    Science.gov (United States)

    Misnasanti; Dien, C. A.; Azizah, F.

    2018-03-01

    This study is aimed to describe Lesson Study (LS) activity and its roles in the development of mathematics learning instruments based on Learning Trajectory (LT). This study is a narrative study of teacher’s experiences in joining LS activity. Data collecting in this study will use three methods such as observation, documentations, and deep interview. The collected data will be analyzed with Milles and Huberman’s model that consists of reduction, display, and verification. The study result shows that through LS activity, teachers know more about how students think. Teachers also can revise their mathematics learning instrument in the form of lesson plan. It means that LS activity is important to make a better learning instruments and focus on how student learn not on how teacher teach.

  11. Solid-State Lighting: Early Lessons Learned on the Way to Market

    Energy Technology Data Exchange (ETDEWEB)

    Sandahl, Linda J.; Cort, Katherine A.; Gordon, Kelly L.

    2013-12-31

    The purpose of this report is to document early challenges and lessons learned in the solid-state lighting (SSL) market development as part of the DOE’s SSL Program efforts to continually evaluate market progress in this area. This report summarizes early actions taken by DOE and others to avoid potential problems anticipated based on lessons learned from the market introduction of compact fluorescent lamps and identifies issues, challenges, and new lessons that have been learned in the early stages of the SSL market introduction. This study identifies and characterizes12 key lessons that have been distilled from DOE SSL program results.

  12. Lessons Learned in Student Venture Creation

    Science.gov (United States)

    Caner, Edward

    The Physics Entrepreneurship Master's Program (PEP) at Case Western Reserve University is now in its 15th year of operation. PEP is a 27 credit-hour Master of Science in Physics, Entrepreneurship Track. The curriculum can be tailored to the needs of each student. Coursework consists of graduate-level classes in science, business, intellectual property law, and innovation. A master's thesis is required that is based on a real-world project in innovation or entrepreneurship within an existing company or startup (possibly the student's). PEP faculty help students connect with mentors, advisors, partners, funding sources and job opportunities. In this talk I will chronicle several pitfalls that we have encountered with our ''real world'' student projects and start-up businesses, several of which met their complete demise despite showing great promise for success. I will discuss how we have learned to avoid most of these pitfalls by taking surprisingly simple actions.

  13. Lessons learned from man-made catastrophes

    International Nuclear Information System (INIS)

    Zebroski, E.L.

    1991-01-01

    Risk management is reminiscent of the parable of the blind men learning about the elephant by feeling about it from different directions. They had a wide range of perceptions. Several of the men felt tree trunks, others a huge snake, the sail of a boat, huge walls, or a rope. Imagine the symposium of these blind folks getting together and arguing about which are the most characteristic or essential parts of the elephant. Risk management is this kind of an elephant. It has many angles. GPU Nuclear, the sponsor of this symposium, seems to be one of the mall handful of organizations that is strongly directed and motivated to seek a whole vision of this very complex elephant. This paper reinforces some of Long's six steps of risk management. The intriguing problem is how to keep good advice from sounding like a series of cliches

  14. System 80+{trademark} standard design incorporates radiation protection lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Crom, T.D.; Naugle, C.L. [Duke Engineering & Services, Inc., Charlotte, NC (United States); Turk, R.S. [ABB Combustion Engineering Nuclear Power, Windsor, CT (United States)

    1995-03-01

    Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commission (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.

  15. Solid-State Lighting. Early Lessons Learned on the Way to Market

    Energy Technology Data Exchange (ETDEWEB)

    Sandahl, L. J.; Cort, K. A.; Gordon, K. L.

    2014-01-01

    Analysis of issues and lessons learned during the early stages of solid-state lighting market introduction in the U.S., which also summarizes early actions taken to avoid potential problems anticipated based on lessons learned from the market introduction of compact fluorescent lamps.

  16. Lessons learned on utilizing the SEI/CMM in the federal government work for others environment

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, A.

    1997-11-01

    This report contains viewgraphs on lessons learned on utilizing the Software Engineering Institute Capability Maturity Model in the federal government work for others environment. These viewgraphs outline: data systems research and development; what is the SEI/CMM; Data Systems Research and Development process improvement approach; accomplishments; and lessons learned.

  17. Lessons learned? Selected public acceptance case studies since Three Mile Island

    Energy Technology Data Exchange (ETDEWEB)

    Blee, D. [NAC International, Atlanta Corporate Headquarters, Atlanta, GA (United States)

    2001-02-01

    This paper will present an overview of the present situation, some recent polling survey information, and then look at lessons learned in terms of selected case studies and some global issues over the 22 years since the Three Mile Island (TMI) accident. That is quite an ambitious topic but there are some important lessons we can learn from the post-TMI era. (author)

  18. Lessons offered, lessons learned: reflections on how doing family therapy can affect therapists.

    Science.gov (United States)

    Heatherington, Laurie; Friedlander, Myrna L; Diamond, Gary M

    2014-08-01

    Only in working conjointly with couples and families do therapists literally witness clients struggling to improve their most intimate relationships. In writing this article, we realized that, in true systemic fashion, not only have many of our clients benefited from working with us, but also we have learned some invaluable lessons from them. Indeed, practicing couple and family therapy gives therapists many opportunities to learn about themselves, especially when it is done thoughtfully. In this article, we reflect on myriad ways in which couples and family therapy has affected each of us personally-as individuals, as partners, as parents, as adult children in our families of origin, and as educators. © 2014 Wiley Periodicals, Inc.

  19. Space reactor safety, 1985--1995 lessons learned

    International Nuclear Information System (INIS)

    Marshall, A.C.

    1995-01-01

    Space reactor safety activities and decisions have evolved over the last decade. Important safety decisions have been made in the SP-100, Space Exploration Initiative, NEPSTP, SNTP, and Bimodal Space Reactor programs. In addition, international guidance on space reactor safety has been instituted. Space reactor safety decisions and practices have developed in the areas of inadvertent criticality, reentry, radiological release, orbital operation, programmatic, and policy. In general, the lessons learned point out the importance of carefully reviewing previous safety practices for appropriateness to space nuclear programs in general and to the specific mission under consideration

  20. Ballistic trauma: lessons learned from iraq and afghanistan.

    Science.gov (United States)

    Shin, Emily H; Sabino, Jennifer M; Nanos, George P; Valerio, Ian L

    2015-02-01

    Management of upper extremity injuries secondary to ballistic and blast trauma can lead to challenging problems for the reconstructive surgeon. Given the recent conflicts in Iraq and Afghanistan, advancements in combat-casualty care, combined with a high-volume experience in the treatment of ballistic injuries, has led to continued advancements in the treatment of the severely injured upper extremity. There are several lessons learned that are translatable to civilian trauma centers and future conflicts. In this article, the authors provide an overview of the physics of ballistic injuries and principles in the management of such injuries through experience gained from military involvement in Iraq and Afghanistan.

  1. Vitrification operational experiences and lessons learned at the WVDP

    International Nuclear Information System (INIS)

    Hamel, W.F. Jr.; Sheridan, M.J.; Valenti, P.J.

    1997-01-01

    The Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP) commenced full, high-level radioactive waste (HLW) processing activities in July 1996. The HLW consists of a blend of washed plutonium-uranium extraction (PUREX) sludge, neutralized thorium extraction (THOREX) waste, and cesium-loaded zeolite. The waste product is borosilicate glass contained in stainless steel canisters, sealed for eventual disposal in a federal repository. This paper discusses the WVDP vitrification process, focusing on operational experience and lessons learned during the first year of continuous, remote operation

  2. Closure of a mixed waste landfill: Lessons learned

    International Nuclear Information System (INIS)

    Phifer, M.A.

    1990-01-01

    Much experience has been gained during the closure of the Mixed Waste Management Facility (MWMF) at the Savannah River Site (SRS) and many lessons were learned. This knowledge was applied to other closures at SRS yielding decreased costs, schedule enhancement, and increased overall project efficiency. The next major area of experience to be gained at SRS in the field of waste site closures will be in the upkeep, maintenance, and monitoring of clay caps. Further test programs will be required to address these requirements

  3. Regional Stability & Lessons Learned in Regional Peace Building

    DEFF Research Database (Denmark)

    Vestenskov, David; Johnsen, Anton Asklund

    , as none of the countries is able to deal with the intrastate and interstate conflicts on its own. The conference Regional Stability & Lessons Learned in Regional Peace Building was the result of comprehensive cooperation between Pakistan’s National Defence University and the Royal Danish Defence College......The NATO-led intervention in Afghanistan is coming to an end, and the necessity of regional peace building solutions for the region’s security issues seems more exigent than ever before. Regional states have to come to terms with each other in some ways if violent extremists are to be countered...

  4. Lessons learned by southern states in transportation of radioactive materials

    International Nuclear Information System (INIS)

    1992-03-01

    This report has been prepared under a cooperative agreement with DOE's Office of Civilian Radioactive Waste Management (OCRWM) and is a summary of the lessons learned by southern states regarding the transportation of radioactive materials including High-Level Radioactive Wastes (HLRW) and Spent Nuclear Fuel (SNF). Sources used in this publication include interviews of state radiological health and public safety officials that are members of the Southern States Energy Board (SSEB) Advisory Committee on Radioactive Materials Transportation, as well as the Board's Transuranic (TRU) Waste Transportation Working Group. Other sources include letters written by the above mentioned committees concerning various aspects of DOE shipment campaigns

  5. Development of an HIV Prevention Videogame: Lessons Learned

    Directory of Open Access Journals (Sweden)

    Kimberly Hieftje

    2016-06-01

    Full Text Available The use of videogames interventions is becoming an increasingly popular and effective strategy in disease prevention and health promotion; however, few health videogame interventions have been scientifically rigorously evaluated for their efficacy. Moreover, few examples of the formative process used to develop and evaluate evidence-based health videogame interventions exist in the scientific literature. The following paper provides valuable insight into the lessons learned during the process of developing the risk reduction and HIV prevention videogame intervention for young adolescents, PlayForward: Elm City Stories. 

  6. EC6 safety enhancement - including impact of Fukushima lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.; Zemdegs, R.; Boyle, S.; Soulard, M., E-mail: stephen.yu@candu.com [Candu Energy Inc., Mississauga, Ontario (Canada)

    2012-09-15

    The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date regulatory requirements and customer expectations. EC6 builds on the proven high performance design inch as the Qinshan CANDU 6 units and has made improvements to safety and operational performance, and has incorporated extensive operational feedback including Fukushima. The Fukushima Dai-ichi March 11, 2011 event has demonstrated the importance of defence-in-depth considerations for beyond-design basis events, including severe accidents. The EC6 design is based on the defence-in-depth principles and provides further design features that address the lessons learned from Fukushima. (author)

  7. Tuberculin immunotherapy: its history and lessons to be learned.

    Science.gov (United States)

    Vilaplana, Cristina; Cardona, Pere-Joan

    2010-02-01

    The use of tuberculin for the therapy of tuberculosis was attempted more than 100 years ago and abandoned because of its adverse reactions. In this historical review we point out that some of the intensive efforts to avoid the reactions were based on the best scientific rationale available at that time. Balancing the dosage and intervals of tuberculin delivery with clinical and laboratory monitoring of patients achieved a limited success, with implications, toward current research in the field. The role of economical and social aspects at that time is also a lesson to be learned toward current approaches to tuberculosis control. Copyright 2009 Elsevier Masson SAS. All rights reserved.

  8. Evidence for Ancient Life in Mars Meteorites: Lessons Learned

    Science.gov (United States)

    McKay, D. S.

    1998-01-01

    The lines of evidence we first proposed as supporting a hypothesis of early life on Mars are discussed by Treiman, who presents pros and cons of our hypothesis in the light of subsequent research by many groups. Our assessment of the current status of the many controversies over our hypothesis is given in reports by Gibson et al. Rather than repeat or elaborate on that information, I prefer to take an overview and present what I think are some of the "lessons learned" by our team in particular, and by the science community in general.

  9. PUREX/UO3 facilities deactivation lessons learned history

    International Nuclear Information System (INIS)

    Gerber, M.S.

    1997-01-01

    In May 1997, a historic deactivation project at the PUREX (Plutonium URanium EXtraction) facility at the Hanford Site in south-central Washington State concluded its activities (Figure ES-1). The project work was finished at $78 million under its original budget of $222.5 million, and 16 months ahead of schedule. Closely watched throughout the US Department of Energy (DOE) complex and by the US Department of Defense for the value of its lessons learned, the PUREX Deactivation Project has become the national model for the safe transition of contaminated facilities to shut down status

  10. JLab SRF Cavity Fabrication Errors, Consequences and Lessons Learned

    International Nuclear Information System (INIS)

    Marhauser, Frank

    2011-01-01

    Today, elliptical superconducting RF (SRF) cavities are preferably made from deep-drawn niobium sheets as pursued at Jefferson Laboratory (JLab). The fabrication of a cavity incorporates various cavity cell machining, trimming and electron beam welding (EBW) steps as well as surface chemistry that add to forming errors creating geometrical deviations of the cavity shape from its design. An analysis of in-house built cavities over the last years revealed significant errors in cavity production. Past fabrication flaws are described and lessons learned applied successfully to the most recent in-house series production of multi-cell cavities.

  11. Space reactor safety, 1985--1995 lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, A.C.

    1995-12-31

    Space reactor safety activities and decisions have evolved over the last decade. Important safety decisions have been made in the SP-100, Space Exploration Initiative, NEPSTP, SNTP, and Bimodal Space Reactor programs. In addition, international guidance on space reactor safety has been instituted. Space reactor safety decisions and practices have developed in the areas of inadvertent criticality, reentry, radiological release, orbital operation, programmatic, and policy. In general, the lessons learned point out the importance of carefully reviewing previous safety practices for appropriateness to space nuclear programs in general and to the specific mission under consideration.

  12. PUREX/UO{sub 3} facilities deactivation lessons learned: History

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.S.

    1997-11-25

    In May 1997, a historic deactivation project at the PUREX (Plutonium URanium EXtraction) facility at the Hanford Site in south-central Washington State concluded its activities (Figure ES-1). The project work was finished at $78 million under its original budget of $222.5 million, and 16 months ahead of schedule. Closely watched throughout the US Department of Energy (DOE) complex and by the US Department of Defense for the value of its lessons learned, the PUREX Deactivation Project has become the national model for the safe transition of contaminated facilities to shut down status.

  13. Lessons Learned From Community-Based Approaches to Sodium Reduction

    Science.gov (United States)

    Kane, Heather; Strazza, Karen; Losby PhD, Jan L.; Lane, Rashon; Mugavero, Kristy; Anater, Andrea S.; Frost, Corey; Margolis, Marjorie; Hersey, James

    2017-01-01

    Purpose This article describes lessons from a Centers for Disease Control and Prevention initiative encompassing sodium reduction interventions in six communities. Design A multiple case study design was used. Setting This evaluation examined data from programs implemented in six communities located in New York (Broome County, Schenectady County, and New York City); California (Los Angeles County and Shasta County); and Kansas (Shawnee County). Subjects Participants (n = 80) included program staff, program directors, state-level staff, and partners. Measures Measures for this evaluation included challenges, facilitators, and lessons learned from implementing sodium reduction strategies. Analysis The project team conducted a document review of program materials and semi structured interviews 12 to 14 months after implementation. The team coded and analyzed data deductively and inductively. Results Five lessons for implementing community-based sodium reduction approaches emerged: (1) build relationships with partners to understand their concerns, (2) involve individuals knowledgeable about specific venues early, (3) incorporate sodium reduction efforts and messaging into broader nutrition efforts, (4) design the program to reduce sodium gradually to take into account consumer preferences and taste transitions, and (5) identify ways to address the cost of lower-sodium products. Conclusion The experiences of the six communities may assist practitioners in planning community-based sodium reduction interventions. Addressing sodium reduction using a community-based approach can foster meaningful change in dietary sodium consumption. PMID:24575726

  14. Lessons learned from community-based approaches to sodium reduction.

    Science.gov (United States)

    Kane, Heather; Strazza, Karen; Losby, Jan L; Lane, Rashon; Mugavero, Kristy; Anater, Andrea S; Frost, Corey; Margolis, Marjorie; Hersey, James

    2015-01-01

    This article describes lessons from a Centers for Disease Control and Prevention initiative encompassing sodium reduction interventions in six communities. A multiple case study design was used. This evaluation examined data from programs implemented in six communities located in New York (Broome County, Schenectady County, and New York City); California (Los Angeles County and Shasta County); and Kansas (Shawnee County). Participants (n = 80) included program staff, program directors, state-level staff, and partners. Measures for this evaluation included challenges, facilitators, and lessons learned from implementing sodium reduction strategies. The project team conducted a document review of program materials and semistructured interviews 12 to 14 months after implementation. The team coded and analyzed data deductively and inductively. Five lessons for implementing community-based sodium reduction approaches emerged: (1) build relationships with partners to understand their concerns, (2) involve individuals knowledgeable about specific venues early, (3) incorporate sodium reduction efforts and messaging into broader nutrition efforts, (4) design the program to reduce sodium gradually to take into account consumer preferences and taste transitions, and (5) identify ways to address the cost of lower-sodium products. The experiences of the six communities may assist practitioners in planning community-based sodium reduction interventions. Addressing sodium reduction using a community-based approach can foster meaningful change in dietary sodium consumption.

  15. Lessons learned from a great master!

    Directory of Open Access Journals (Sweden)

    Wagner Seixas da Silva

    2015-06-01

    Full Text Available Teaching Biochemistry is a huge challenge in the basic cycle of many undergraduate courses. How to convince students that this discipline is important for their academic degree so early in their college journeys? It may be hard to define in words a good teaching strategy for this purpose, but during the 70s'/80's a group of professors accepted this tough task! Professor Leopoldo de Meis paid particular attention to the way of teaching biochemistry. As a very sensitive person, he realized that the secret to a good teaching would be to keep the students motivated with doses of challenge.With this in mind, Prof. de Meis joined a small group of professors and graduate students from the former Department of Medical Biochemistry, now named Institute of Medical Biochemistry Leopoldo de Meis, at the Federal University of Rio de Janeiro, and proposed to use the Discovery learning method in classroom. The idea was to present the contents of the biochemistry course while challenging students to interpret the original data of the major biochemical findings. For this purpose, each biochemistry theme was shown through the experiments that led to the originally obtained conclusions currently present in the textbooks. Thus, students were motivated to ask questions and propose experiments that allow the interpretation of the scientists’ historical results. At first the methodology seemed very novel and difficult, but over the first few minutes the environment became a place for broad scientific discussion, where students enthusiastically participated and developed the ability to draw up the necessary questions to decipher the functioning of metabolic pathways. The parallel between the observed experimental facts and the physiological state of the experimental model used in classic experiments permitted the development of a broad and critical knowledge in the learning of biochemistry.To imagine that the students were motivated to develop the autonomy of

  16. Using Selective Redundancy and Testing to Optimize Learning from Multimedia Lessons

    OpenAIRE

    Yue, Carole Leigh

    2014-01-01

    Multimedia learning refers to learning from a combination of words and images. In the present dissertation, a multimedia lesson is defined as an animated, narrated educational video that depicts a scientific process--a format of instructional material becoming increasingly common in online, hybrid, and traditional classrooms. The overarching goal of the present research was to investigate how to optimize learning from multimedia lessons using two related theories of multimedia learning (the...

  17. State Support for Clean Energy Deployment. Lessons Learned for Potential Future Policy

    Energy Technology Data Exchange (ETDEWEB)

    Kubert, Charles [Clean Energy States Alliance, Montpelier, VT (United States); Sinclair, Mark [Clean Energy States Alliance, Montpelier, VT (United States)

    2011-04-01

    Proposed federal clean energy initiatives and climate legislation have suggested significant increases to federal funding for clean energy deployment and investment. Many states and utilities have over a decade of experience and spend billions of public dollars every year to support EE/RE deployment through programs that reduce the cost of technologies, provide financing for EE/RE projects, offer technical assistance, and educate market participants. Meanwhile, constraints on public expenditures at all levels of government continue to call upon such programs to demonstrate their value. This report reviews the results of these programs and the specific financial incentives and financing tools used to encourage clean energy investment. Lessons from such programs could be used to inform the future application of EE/RE incentives and financing tools. These lessons learned apply to use of distributed resources and the historical focus of these EE/RE programs.

  18. State Support for Clean Energy Deployment: Lessons Learned for Potential Future Policy

    Energy Technology Data Exchange (ETDEWEB)

    Kubert, C.; Sinclair, M.

    2011-04-01

    Proposed federal clean energy initiatives and climate legislation have suggested significant increases to federal funding for clean energy deployment and investment. Many states and utilities have over a decade of experience and spend billions of public dollars every year to support EE/RE deployment through programs that reduce the cost of technologies, provide financing for EE/RE projects, offer technical assistance, and educate market participants. Meanwhile, constraints on public expenditures at all levels of government continue to call upon such programs to demonstrate their value. This report reviews the results of these programs and the specific financial incentives and financing tools used to encourage clean energy investment. Lessons from such programs could be used to inform the future application of EE/RE incentives and financing tools. These lessons learned apply to use of distributed resources and the historical focus of these EE/RE programs.

  19. Implementation of problem-based learning in geometry lessons

    Science.gov (United States)

    Ahamad, S. N. S. H.; Li, H.-C.; Shahrill, M.; Prahmana, R. C. I.

    2017-12-01

    The aim of this study is twofold. Firstly, it aims to examine the effects of the Problem-Based Learning (PBL) approach on students’ performance in the learning of geometry. Secondly, it seeks to gain insights from the students regarding the implementation of PBL in geometry lessons. The participants were 22 students from one Year 10 class in a co-educational secondary school in Brunei Darussalam. A mixed method design was employed with data collected from the pre-, post- and retention tests, and interviews. The findings from this study revealed positive influences on students’ performance in learning geometry as gain and retention of knowledge was observed. Meanwhile, mixed responses from the interviews implied that in terms of 1) learning attitudes, students favoured the idea of independent learning but some critiqued that the process of PBL might be time-consuming; 2) learning difficulties, some students struggled in assimilating information leading to poor decision- making; and 3) knowledge and skills, some students believed to have nurtured some skills such as communication and research skills.

  20. Lessons learned from perinatal exposure to diethylstilbestrol

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, Retha R

    2004-09-01

    The synthetic estrogen diethylstilbestrol (DES) is well documented to be a perinatal carcinogen in both humans and experimental animals. Exposure to DES during critical periods of differentiation permanently alters the programming of estrogen target tissues resulting in benign and malignant abnormalities in the reproductive tract later in life. Using the perinatal DES-exposed rodent model, cellular and molecular mechanisms have been identified that play a role in these carcinogenic effects. Although DES is a potent estrogenic chemical, effects of low doses of the compound are being used to predict health risks of weaker environmental estrogens. Therefore, it is of particular interest that developmental exposure to very low doses of DES has been found to adversely affect fertility and to increase tumor incidence in murine reproductive tract tissues. These adverse effects are seen at environmentally relevant estrogen dose levels. New studies from our lab verify that DES effects are not unique; when numerous environmental chemicals with weak estrogenic activity are tested in the experimental neonatal mouse model, developmental exposure results in an increased incidence of benign and malignant tumors including uterine leiomyomas and adenocarcinomas that are similar to those shown following DES exposure. Finally, growing evidence in experimental animals suggests that some adverse effects can be passed on to subsequent generations, although the mechanisms involved in these trans-generational events remain unknown. Although the complete spectrum of risks to DES-exposed humans are uncertain at this time, the scientific community continues to learn more about cellular and molecular mechanisms by which perinatal carcinogenesis occurs. These advances in knowledge of both genetic and epigenetic mechanisms will be significant in ultimately predicting risks to other environmental estrogens and understanding more about the role of estrogens in normal and abnormal development.

  1. Lessons learned from perinatal exposure to diethylstilbestrol

    International Nuclear Information System (INIS)

    Newbold, Retha R.

    2004-01-01

    The synthetic estrogen diethylstilbestrol (DES) is well documented to be a perinatal carcinogen in both humans and experimental animals. Exposure to DES during critical periods of differentiation permanently alters the programming of estrogen target tissues resulting in benign and malignant abnormalities in the reproductive tract later in life. Using the perinatal DES-exposed rodent model, cellular and molecular mechanisms have been identified that play a role in these carcinogenic effects. Although DES is a potent estrogenic chemical, effects of low doses of the compound are being used to predict health risks of weaker environmental estrogens. Therefore, it is of particular interest that developmental exposure to very low doses of DES has been found to adversely affect fertility and to increase tumor incidence in murine reproductive tract tissues. These adverse effects are seen at environmentally relevant estrogen dose levels. New studies from our lab verify that DES effects are not unique; when numerous environmental chemicals with weak estrogenic activity are tested in the experimental neonatal mouse model, developmental exposure results in an increased incidence of benign and malignant tumors including uterine leiomyomas and adenocarcinomas that are similar to those shown following DES exposure. Finally, growing evidence in experimental animals suggests that some adverse effects can be passed on to subsequent generations, although the mechanisms involved in these trans-generational events remain unknown. Although the complete spectrum of risks to DES-exposed humans are uncertain at this time, the scientific community continues to learn more about cellular and molecular mechanisms by which perinatal carcinogenesis occurs. These advances in knowledge of both genetic and epigenetic mechanisms will be significant in ultimately predicting risks to other environmental estrogens and understanding more about the role of estrogens in normal and abnormal development

  2. Development practices and lessons learned in developing SimPEG

    Science.gov (United States)

    Cockett, R.; Heagy, L. J.; Kang, S.; Rosenkjaer, G. K.

    2015-12-01

    Inverse modelling provides a mathematical framework for constructing a model of physical property distributions in the subsurface that are consistent with the data collected in geophysical surveys. The geosciences are increasingly moving towards the integration of geological, geophysical, and hydrological information to better characterize the subsurface. This integration must span disciplines and is not only challenging scientifically, but additionally the inconsistencies between conventions often makes implementations complicated, non­ reproducible, or inefficient. SimPEG is an open-source, multi-university effort aimed at providing a generalized framework for solving forward and inverse problems. SimPEG includes finite volume discretizations on structured and unstructured meshes, interfaces to standard numerical solver packages, convex optimization algorithms, model parameterizations, and visualization routines. The SimPEG package (http://simpeg.xyz) supports an ecosystem of forward and inverse modelling applications, including electromagnetics, vadose zone flow, seismic, and potential­ fields, that are all written with a common interface and toolbox. The goal of SimPEG is to support a community of researchers with well-tested, extensible tools, and encourage transparency and reproducibility both of the SimPEG software and the geoscientific research it is applied to. In this presentation, we will share some of the lessons we have learned in designing the modular infrastructure, testing and development practices of SimPEG. We will discuss our use of version control, extensive unit-testing, continuous integration, documentation, issue tracking, and resources that facilitate communication between existing team members and allows new researchers to get involved. These practices have enabled the use of SimPEG in research, industry, and education as well as the ability to support a growing number of dependent repositories and applications. We hope that sharing our

  3. 241-SY-101 air lance removal lessons learned

    International Nuclear Information System (INIS)

    Moore, T.L.; Titzler, P.A.

    1994-01-01

    An emergency task was undertaken to remove four air lances and one thermocouple (TC) tree from tank 241-SY-101 (SY-101). This resulted from video observation that these pipes were being severely bent during periodic gas release events that regularly occurred every three to four months. At the time, the gas release events were considered to be the number one safety issue within the US Department of Energy (DOE) complex. This emergency removal task was undertaken on an extremely short schedule that required all activities possible to be completed in parallel. This approach and extremely short schedule, while successful, resulted in some undesirable consequences from less than desired time for design, reviews, equipment testing, operations training, and bad weather conditions. These consequences included leakage of liquid waste from the containers to the ground, higher than expected dose rates at the container surface, difficult field operations, and unexpected pipe configuration during removal. In addition, changes to environmental regulations and severe winter weather impacted the packaging and shipping activities required the prepare the removed pipes for storage at the Central Waste Complex (CWC). The purpose of this document is to identify lessons to be learned for future activities. In context of the emergency conditions that existed at the time and the urgency to remove these pipes, their removal was successfully completed under extremely difficult conditions and schedule. The success of the task should not be overshadowed by the desire to identify areas needing improvement and lessons to be learned. Many of the lessons identified in this document have already resulted in improved conduct of operations and engineering

  4. Cybernetic Service-Learning Course Development: Lessons Learned

    Science.gov (United States)

    Marx, Jonathan I.; Miller, Lee Q.

    2009-01-01

    Although the title of the course, Combating Loneliness among Older People in Contemporary Society, states a clear goal, our service-learning class was shaped by five guiding parameters. By avoiding certain things, we allowed the course to self-organize and evolve into a learning experience beyond the one originally envisioned. This paper…

  5. "Involvement in Learning" Revisited: Lessons We Have Learned.

    Science.gov (United States)

    Astin, Alexander W.

    1999-01-01

    Originally published in March/April 1996, reviews the interconnections between two national reports, "Involvement in Learning," and the "Student Learning Imperative." Focuses on the issue of shared values and demonstrates how student affairs professionals can utilize the most recent research to realize the full potential of the…

  6. Next Generation Launch Technology Program Lessons Learned

    Science.gov (United States)

    Cook, Stephen; Tyson, Richard

    2005-01-01

    In November 2002, NASA revised its Integrated Space Transportation Plan (ISTP) to evolve the Space Launch Initiative (SLI) to serve as a theme for two emerging programs. The first of these, the Orbital Space Plane (OSP), was intended to provide crew-escape and crew-transfer functions for the ISS. The second, the NGLT Program, developed technologies needed for safe, routine space access for scientific exploration, commerce, and national defense. The NGLT Program was comprised of 12 projects, ranging from fundamental high-temperature materials research to full-scale engine system developments (turbine and rocket) to scramjet flight test. The Program included technology advancement activities with a broad range of objectives, ultimate applications/timeframes, and technology maturity levels. An over-arching Systems Engineering and Analysis (SE&A) approach was employed to focus technology advancements according to a common set of requirements. Investments were categorized into three segments of technology maturation: propulsion technologies, launch systems technologies, and SE&A.

  7. Lessons from school: what nurse leaders can learn from education.

    Science.gov (United States)

    Davies, Nigel

    2015-07-01

    The drive to improve quality in the education sector is similar to that in health care, and lessons from the schools system are relevant to nursing leadership. This article discusses these shared traits, and details how school improvement was achieved in London and how a model of learning-centred leadership helped to transform pupil attainment in schools that had been performing poorly. Parallels are drawn between the education inspection system undertaken by Ofsted and the hospital inspections undertaken by the Care Quality Commission, and between the practice discipline-based managerial roles of nurse directors and head teachers. The article suggests that a learning-centred approach to improving the quality of patient care is needed, with a focus on the education and continuing professional development of staff.

  8. User observations on information sharing (corporate knowledge and lessons learned)

    Science.gov (United States)

    Montague, Ronald A.; Gregg, Lawrence A.; Martin, Shirley A.; Underwood, Leroy H.; Mcgee, John M.

    1993-01-01

    The sharing of 'corporate knowledge' and lessons learned in the NASA aerospace community has been identified by Johnson Space Center survey participants as a desirable tool. The concept of the program is based on creating a user friendly information system that will allow engineers, scientists, and managers at all working levels to share their information and experiences with other users irrespective of location or organization. The survey addresses potential end uses for such a system and offers some guidance on the development of subsequent processes to ensure the integrity of the information shared. This system concept will promote sharing of information between NASA centers, between NASA and its contractors, between NASA and other government agencies, and perhaps between NASA and institutions of higher learning.

  9. Lessons-Learned from an Event during Overhaul

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jitae [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-05-15

    The event frequency, also including portion of human errors, has been decreasing compared to last ten years. However, events due to human errors during overhaul occur every year. From analyzed results for human-related events during overhaul, similar problems were identified. And organizational and safety cultural factors were also identified. On the other hand, another event during overhaul is analyzed and Lessons-Learned is drawn in an aspect of the operators' situation awareness. There was an event during overhaul and the analyzed results drawn Lessons-Learned in the aspect of the operators' situation awareness. From the analysis, several alarms and variation of plant parameters during overhaul can occur due to various maintenance works and tests. And in the aspect of the situation awareness, operators can miss, neglect, or not recognize the abnormal situation due to other maintenance activities occurring simultaneously. Therefore, countermeasures such as operator education or training, development of operator support systems, and further researches should be necessary to cope with these problems.

  10. Risk management and lessons learned solutions for satellite product assurance

    Science.gov (United States)

    Larrère, Jean-Luc

    2004-08-01

    The historic trend of the space industry towards lower cost programmes and more generally a better economic efficiency raises a difficult question to the quality assurance community: how to achieve the same—or better—mission success rate while drastically reducing the cost of programmes, hence the cost and level of quality assurance activities. EADS Astrium Earth Observation and Science (France) Business Unit have experimented Risk Management and Lessons Learned on their satellite programmes to achieve this goal. Risk analysis and management are deployed from the programme proposal phase through the development and operations phases. Results of the analysis and the corresponding risk mitigation actions are used to tailor the product assurance programme and activities. Lessons learned have been deployed as a systematic process to collect positive and negative experience from past and on-going programmes and feed them into new programmes. Monitoring and justification of their implementation in programmes is done under supervision from the BU quality assurance function. Control of the system is ensured by the company internal review system. Deployment of these methods has shown that the quality assurance function becomes more integrated in the programme team and development process and that its tasks gain focus and efficiency while minimising the risks associated with new space programmes.

  11. Lessons learned from the PMI case study: the community perspective.

    Science.gov (United States)

    Hare, M L; Orians, C E; Kennedy, M G; Goodman, K J; Wijesinha, S; Seals, B F

    2000-03-01

    This summary report presents the lessons learned during the two-part qualitative case study on the efficacy of the Prevention Marketing Initiative (PMI) in its implementation of an HIV prevention program. About 179 community participants were included in the PMI program, which discussed topics ranging from organizing initial planning committees to financially sustaining federal demonstration programs. One of the successes observed was the development of rapport with schools and churches; however, during the course of its implementation, the program realized the necessity of 1) approaching the program as an ongoing process; 2) going beyond studying the target population through formative research; 3) changing the role of a community coalition as the project matures; 4) reexamining the composition of coalition in the light of the target audience; 5) advocating the project as a community resource that promotes collaboration; 6) attending the needs of coalition members; and 7) using the media in the campaign. Likewise, several lessons were also learned in the areas of youth involvement, intervention development, program implementation, and maintenance of PMI activities.

  12. Lessons Learned In Aerosol Monitoring With The RASA

    International Nuclear Information System (INIS)

    Forrester, Joel B.; Bowyer, Ted W.; Carty, Fitz; Comes, Laura; Eslinger, Paul W.; Greenwood, Lawrence R.; Haas, Derek A.; Hayes, James C.; Kirkham, Randy R.; Lepel, Elwood A.; Litke, Kevin E.; Miley, Harry S.; Morris, Scott J.; Schrom, Brian T.; Van Davelaar, Peter; Woods, Vincent T.

    2011-01-01

    The Radionuclide Aerosol Sampler/Analyzer (RASA) is an automated aerosol collection and analysis system designed by Pacific Northwest National Laboratory (PNNL) in the 1990's and is deployed in several locations around the world as part of the International Monitoring System (IMS) required under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The RASA operates unattended, save for regularly scheduled maintenance, iterating samples through a three-step process on a 24-hour interval. In its 15-year history, much has been learned from the operation and maintenance of the RASA that can benefit engineering updates or future aerosol systems. On 11 March 2011, a 9.0 magnitude earthquake and tsunami rocked the eastern coast of Japan, resulting in power loss and cooling failures at the Daiichi nuclear power plants in Fukushima Prefecture. Aerosol collections were conducted with the RASA in Richland, WA. We present a summary of the lessons learned over the history of the RASA, including lessons taken from the Fukushima incident, regarding the RASA IMS stations operated by the United States.

  13. Psychosocial Rehabilitation: Some Lessons Learned From Natural Disaster in Iran

    Directory of Open Access Journals (Sweden)

    Fardin Alipour

    2016-01-01

    Full Text Available Background: Disasters have adverse impacts on different aspects of human life. Psychosocial Rehabilitation is one of the fields which is usually overshadowed and ignored by physical rehabilitation or its importance does not receive proper attention. This research attempts to study some lessons learned from Psychosocial Rehabilitation based on disaster experiences in Iran. Materials and Methods: This study has a conventional qualitative content analysis design. The participants of study were 15 people with direct experience of earthquake and 12 experts in this field. The study sample was selected by purposeful sampling method and the data were collected by semi-structured interviews. Results: Lack of a suitable system to deliver Psychosocial Rehabilitation, challenge in establishing balance between short-term and long-term social and mental needs, lack of mental and social experts, inefficiency in using social capital and capacities are the most important lessons learned in this field. Conclusion: Lack of awareness of mental and social problems of affected people after disaster is one of the most important barriers in successful and stable rehabilitation. Psychosocial Rehabilitation requires a suitable structure and planning for all stages of disaster management.

  14. Lessons learned from decommissioning projects at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    Salazar, M.

    1995-01-01

    This paper describes lessons learned over the last 20 years from 12 decommissioning projects at Los Alamos National Laboratory. These lessons relate both to overall program management and to management of specific projects during the planning and operations phases. The issues include waste management; the National Environmental Policy Act (NEPA); the Resource Conservation and Recovery Act (RCRA); the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); contracting; public involvement; client/customer interface; and funding. Key elements of our approach are to be proactive; follow the observation method; perform field activities concurrently; develop strategies to keep reportable incidents from delaying work; seek and use programs, methods, etc., in existence to shorten learning curves; network to help develop solutions; and avoid overstudying and overcharacterizing. This approach results in preliminary plans that require very little revision before implementation, reasonable costs and schedules, early acquisition of permits and NEPA documents, preliminary characterization reports, and contracting documents. Our track record is good -- the last four projects (uranium and plutonium-processing facility and three research reactors) have been on budget and on schedule

  15. Lessons learned from the decommissioning of NORM facility in Malaysia

    International Nuclear Information System (INIS)

    Kontol, Khairuddin M.; Omar, Muhamat; Ahmad, Syed H.S.S.

    2008-01-01

    Full text: Malaysia Decommissioning of Naturally Occurring Radioactive Materials (NORM) facility in Malaysia will run into unforeseeable complications and difficulties if there is no proper planning. The Atomic Energy Licensing Board (AELB) plays important role in guiding and assisting the operator/contractor in this NORM decommissioning project. A local Naturally Occurring Radioactive Materials (NORM) processing plant located in the northern region of peninsular Malaysia had ceased its operations and decided to decommission and remediate its site for the final release of the site. The remediated site is earmarked as an industrial site. During its operations, monazites are processed for rare earth elements such as cerium and lanthanum. It's plant capable of processing monazite to produce rare earth chloride and rare earth carbonate. The main by-product of monazite processing is the radioactive cake containing primarily thorium hydroxide. Operation of the monazite processing plant started in early eighties and terminated in early nineties. The decommissioning of the plant site started in late 2003 and completed its decommissioning and remediation works in early 2006. This paper described the lesson learned by Malaysian Nuclear Agency (Nuclear Malaysia) in conducting third party independent audit for the decommissioning of the NORM contaminated facility. By continuously reviewing the lessons learned, mistakes and/or inefficiencies in this plant decommissioning project, hopefully will result in a smoother, less costly and more productive future decommissioning works on NORM facilities in Malaysia. (author)

  16. Lessons-Learned from an Event during Overhaul

    International Nuclear Information System (INIS)

    Kim, Jitae

    2013-01-01

    The event frequency, also including portion of human errors, has been decreasing compared to last ten years. However, events due to human errors during overhaul occur every year. From analyzed results for human-related events during overhaul, similar problems were identified. And organizational and safety cultural factors were also identified. On the other hand, another event during overhaul is analyzed and Lessons-Learned is drawn in an aspect of the operators' situation awareness. There was an event during overhaul and the analyzed results drawn Lessons-Learned in the aspect of the operators' situation awareness. From the analysis, several alarms and variation of plant parameters during overhaul can occur due to various maintenance works and tests. And in the aspect of the situation awareness, operators can miss, neglect, or not recognize the abnormal situation due to other maintenance activities occurring simultaneously. Therefore, countermeasures such as operator education or training, development of operator support systems, and further researches should be necessary to cope with these problems

  17. Twenty years of immunocontraceptive research: lessons learned.

    Science.gov (United States)

    Miller, Lowell A; Fagerstone, Kathleen A; Eckery, Douglas C

    2013-12-01

    The National Wildlife Research Center (NWRC) began immunocontraception vaccine research by testing porcine zona pellucida (PZP) on white-tailed deer (Odocoileus virginianus). Early PZP research demonstrated that PZP induced infertility; however, increased length of the rut was observed in PZP-treated deer. An alternative vaccine using a keyhole limpet hemocyanin-gonadotropin-releasing hormone (KLH-GnRH) conjugate formulated with modified Freund's adjuvant was developed at NWRC. Suppression of GnRH has reduced reproduction in both sexes but is most effective in females. This vaccine was effective in preventing contraception in female deer for several years after a prime and boost. Due to adverse side effects of Freund's adjuvant, NWRC developed a new adjuvant called AdjuVac, a mineral oil/surfactant adjuvant with the addition of Mycobacterium avium as an immunostimulant. The price of KLH prompted a search for a more economical hemocyanin carrier protein for the GnRH peptide. Blue protein, derived from the mollusk Concholepas concholepas, proved to be a successful option. Formulation improvements resulted in a vaccine that can be effective as a single injection for multiple years, now called GonaCon. GonaCon is registered with the Environmental Protection Agency (EPA) for use in white-tailed deer in urban/suburban areas and for wild horses (Equus caballus) and burros (Equus asinus). Future GonaCon applications may include reducing reproduction to manage populations of other wildlife species, such as prairie dogs (Cynomys ludovicianus) in urban areas and suppressing reproduction to reduce the spread of venereal diseases such as brucellosis. Research is being conducted to develop a GnRH vaccine used in combination with the rabies vaccine to control population growth in free-roaming dogs, with the secondary effect of managing the spread of rabies. The EPA would regulate all these uses. Research is also ongoing on a GnRH vaccine to delay the onset of adrenocortical

  18. WHY CANT WE LEARN FROM OUR MISTAKES LEARN THE LESSON TELL THE STORY

    International Nuclear Information System (INIS)

    LANGSTAFF, D.C.

    2005-01-01

    Tell the story well and people can learn from the lesson. The United States Department of Energy (DOE) Office of Environmental Management (EM) and its contractors are pursuing environmental remediation at the Hanford Site. This endeavor has been underway for a number of years, both at Hanford and at other sites across the DOE complex. Independently, the occurrence of two fatalities on two Sites at opposite ends of the country within two weeks raised the question, ''What is going on in the Field?'' Corporate EM management communicated directly with Field Office Managers to answer the question. As a result of this intense interest and focused communication, EM identified four areas that need additional exploration. One of those is, ''EM's ability to learn from its mistakes.'' The need to cultivate the ability to learn from our mistakes is not unique to DOE. A quick review of EM Lessons Learned reports shows that most of the reports in the EM system originate at the sites with the largest budgets doing the most work. Not surprising. A second look, however, reveals that many reports are repetitive, that many people might consider many reports trivial, and that reports on some of the more significant events sometimes take a long time to get distributed across the DOE Complex. Spot checks of event reports revealed frequent identification of symptoms rather than root causes. With a high percentage of identified root causes in the questionable category, it is highly unlikely that the real root causes of many events are being corrected, thus leading to recurrences of events. To learn the lesson from an event, people need to be aware of the root causes of the event. Someone has to tell a story the reader can learn from, i.e., include all the information needed to understand what happened and why it happened. Most importantly, they need to understand the lesson to be learned

  19. Lesson learned from the SARNET wall condensation benchmarks

    International Nuclear Information System (INIS)

    Ambrosini, W.; Forgione, N.; Merli, F.; Oriolo, F.; Paci, S.; Kljenak, I.; Kostka, P.; Vyskocil, L.; Travis, J.R.; Lehmkuhl, J.; Kelm, S.; Chin, Y.-S.; Bucci, M.

    2014-01-01

    Highlights: • The results of the benchmarking activity on wall condensation are reported. • The work was performed in the frame of SARNET. • General modelling techniques for condensation are discussed. • Results of University of Pisa and of other benchmark participants are discussed. • The lesson learned is drawn. - Abstract: The prediction of condensation in the presence of noncondensable gases has received continuing attention in the frame of the Severe Accident Research Network of Excellence, both in the first (2004–2008) and in the second (2009–2013) EC integrated projects. Among the different reasons for considering so relevant this basic phenomenon, coped with by classical treatments dated in the first decades of the last century, there is the interest for developing updated CFD models for reactor containment analysis, requiring validating at a different level the available modelling techniques. In the frame of SARNET, benchmarking activities were undertaken taking advantage of the work performed at different institutions in setting up and developing models for steam condensation in conditions of interest for nuclear reactor containment. Four steps were performed in the activity, involving: (1) an idealized problem freely inspired at the actual conditions occurring in an experimental facility, CONAN, installed at the University of Pisa; (2) a first comparison with experimental data purposely collected by the CONAN facility; (3) a second comparison with data available from experimental campaigns performed in the same apparatus before the inclusion of the activities in SARNET; (4) a third exercise involving data obtained at lower mixture velocity than in previous campaigns, aimed at providing conditions closer to those addressed in reactor containment analyses. The last step of the benchmarking activity required to change the configuration of the experimental apparatus to achieve the lower flow rates involved in the new test specifications. The

  20. Lessons learned from material management at Vandellos-I

    International Nuclear Information System (INIS)

    Albarran, J.L. Santiago

    2003-01-01

    Declassification Container ' by means of a gamma spectrometry measuring system. On the basis of the experience this paper will describe the lessons learned in material management in Vandellos-I, in the areas of: - Organisation and planning; - Important role of logistics; - Capacity of the different storage areas; - Conservatism of the clearance process; - Cost/effort of Clearance process; - Recycle / Reuse; - Management and traceability of information

  1. Lessons learned in planning the Canadian Nuclear Legacy Liabilities Program

    International Nuclear Information System (INIS)

    Stephens, M.; Brooks, S.; Miller, J.; Neal, P.; Mason, R.

    2011-01-01

    In 2006, Atomic Energy of Canada Limited (AECL) and Natural Resources Canada (NRCan) began implementing a $7B CDN, 70-year Nuclear Legacy Liabilities Program (NLLP) to deal with legacy decommissioning and environmental issues at AECL nuclear sites. The objective of the NLLP is to safely and cost-effectively reduce the nuclear legacy liabilities and associated risks based on sound waste management and environmental principles in the best interest of Canadians. The NLLP comprises a number of interlinked decommissioning, waste management and environmental restoration activities that are being executed at different sites by various technical groups. Many lessons about planning and executing such a large, diverse Program have been learned in planning the initial five-year 'start-up' phase (concluded 2011 March), in planning the three-year second phase (currently being commenced), and in planning individual and interacting activities within the Program. The activities to be undertaken in the start-up phase were planned by a small group of AECL technical experts using the currently available information on the liabilities. Several internal and external reviews of the Program during the start-up phase examined progress and identified several improvements to planning. These improvements included strengthening communications among the groups within the Program, conducting more detailed advance planning of the interlinked activities, and being cautious about making detailed commitments for activities for which major decisions had yet to be made. The second phase was planned by a dedicated core team. More and earlier input was solicited from the suppliers than in the planning for the first phase. This was to ensure that the proposed program of work was feasible, and to be able to specify in more detail the resources that would be required to carry it out. The NLLP has developed several processes to assist in the detailed planning of the numerous projects and

  2. Developing a PLC-friendly state machine model: lessons learned

    Science.gov (United States)

    Pessemier, Wim; Deconinck, Geert; Raskin, Gert; Saey, Philippe; Van Winckel, Hans

    2014-07-01

    Modern Programmable Logic Controllers (PLCs) have become an attractive platform for controlling real-time aspects of astronomical telescopes and instruments due to their increased versatility, performance and standardization. Likewise, vendor-neutral middleware technologies such as OPC Unified Architecture (OPC UA) have recently demonstrated that they can greatly facilitate the integration of these industrial platforms into the overall control system. Many practical questions arise, however, when building multi-tiered control systems that consist of PLCs for low level control, and conventional software and platforms for higher level control. How should the PLC software be structured, so that it can rely on well-known programming paradigms on the one hand, and be mapped to a well-organized OPC UA interface on the other hand? Which programming languages of the IEC 61131-3 standard closely match the problem domains of the abstraction levels within this structure? How can the recent additions to the standard (such as the support for namespaces and object-oriented extensions) facilitate a model based development approach? To what degree can our applications already take advantage of the more advanced parts of the OPC UA standard, such as the high expressiveness of the semantic modeling language that it defines, or the support for events, aggregation of data, automatic discovery, ... ? What are the timing and concurrency problems to be expected for the higher level tiers of the control system due to the cyclic execution of control and communication tasks by the PLCs? We try to answer these questions by demonstrating a semantic state machine model that can readily be implemented using IEC 61131 and OPC UA. One that does not aim to capture all possible states of a system, but rather one that attempts to organize the course-grained structure and behaviour of a system. In this paper we focus on the intricacies of this seemingly simple task, and on the lessons that we

  3. PUREX/UO3 Facilities deactivation lessons learned history

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.S.

    1996-09-19

    accompanied by and were an integral part of sweeping ``culture changes,`` the story of the lessons learned during the PUREX Deactivation Project are worth recounting. Foremost among the lessons is recognizing the benefits of ``right to left`` project planning. A deactivation project must start by identifying its end points, then make every task, budget, and organizational decision based on reaching those end points. Along with this key lesson is the knowledge that project planning and scheduling should be tied directly to costing, and the project status should be checked often (more often than needed to meet mandated reporting requirements) to reflect real-time work. People working on a successful project should never be guessing about its schedule or living with a paper schedule that does not represent the actual state of work. Other salient lessons were learned in the PUREX/UO3 Deactivation Project that support these guiding principles. They include recognizing the value of independent review, teamwork, and reengineering concepts; the need and value of cooperation between the DOE, its contractors, regulators, and stakeholders; and the essential nature of early and ongoing communication. Managing a successful project also requires being willing to take a fresh look at safety requirements and to apply them in a streamlined and sensible manner to deactivating facilities; draw on the enormous value of resident knowledge acquired by people over years and sometimes decades of working in old plants; and recognize the value of bringing in outside expertise for certain specialized tasks.This approach makes possible discovering the savings that can come when many creative options are pursued persistently and the wisdom of leaving some decisions to the future. The essential job of a deactivation project is to place a facility in a safe, stable, low-maintenance mode, for an interim period. Specific end points are identified to recognize and document this state. Keeping the limited

  4. Unintended Learning in Primary School Practical Science Lessons from Polanyi's Perspective of Intellectual Passion

    Science.gov (United States)

    Park, Jisun; Song, Jinwoong; Abrahams, Ian

    2016-01-01

    This study explored, from the perspective of intellectual passion developed by Michael Polanyi, the unintended learning that occurred in primary practical science lessons. We use the term "unintended" learning to distinguish it from "intended" learning that appears in teachers' learning objectives. Data were collected using…

  5. Involving users with learning difficulties in health improvement: lessons from inclusive learning disability research.

    Science.gov (United States)

    Walmsley, Jan

    2004-03-01

    In this paper the author considers the lessons to be drawn from what is termed "inclusive" learning disability research for user involvement around health improvement. Inclusive learning disability research refers to research where people with learning difficulties (intellectual disability) are involved as active participants, as opposed to passive subjects. There is by now a considerable body of such research, developed over the past 25 years. From the review, the author draws attention to areas which can inform practice in involvement of users in a way that adds value.

  6. Learning on governance in forest ecosystems: Lessons from recent research

    Directory of Open Access Journals (Sweden)

    Catherine May Tucker

    2010-09-01

    Full Text Available Research on forest governance has intensified in recent decades with evidence that efforts to mitigate deforestation and encourage sustainable management have had mixed results. This article considers the progress that has been made in understanding the range of variation in forest governance and management experiences. It synthesizes findings of recent interdisciplinary research efforts, with particular attention to work conducted through the Center for the Study of Institutions, Population and Environmental Change and the International Forestry Resources and Institution Research Program. By identifying areas of progress, lessons learned, and challenges for successful forest governance, the discussion points to policy implications and priorities for research.Research on forest governance has intensified in recent decades with evidence that efforts to mitigate deforestation and encourage sustainable management have had mixed results. This article considers the progress that has been made in understanding the range of variation in forest governance and management experiences. It synthesizes findings of recent interdisciplinary research efforts, which indicate that sustainable management of forest resources is associated with secure rights, institutions that fit the local context, and monitoring and enforcement. At the same time, the variability in local contexts and interactions of social, political, economic and ecological processes across levels and scales of analysis create uncertainties for the design and maintenance of sustainable forest governance.  By identifying areas of progress, lessons learned, and gaps in knowledge, the discussion suggests priorities for further research.Research on forest governance has intensified in recent decades with evidence that efforts to mitigate deforestation and encourage sustainable management have had mixed results. This article considers the progress that has been made in understanding the range of

  7. Lesson Study-Building Communities of Learning Among Pre-Service Science Teachers

    Science.gov (United States)

    Hamzeh, Fouada

    Lesson Study is a widely used pedagogical approach that has been used for decades in its country of origin, Japan. It is a teacher-led form of professional development that involves the collaborative efforts of teachers in co-planning and observing the teaching of a lesson within a unit for evidence that the teaching practices used help the learning process (Lewis, 2002a). The purpose of this research was to investigate if Lesson Study enables pre-service teachers to improve their own teaching in the area of science inquiry-based approaches. Also explored are the self-efficacy beliefs of one group of science pre-service teachers related to their experiences in Lesson Study. The research investigated four questions: 1) Does Lesson Study influence teacher preparation for inquiry-based instruction? 2) Does Lesson Study improve teacher efficacy? 3) Does Lesson Study impact teachers' aspiration to collaborate with colleagues? 4) What are the attitudes and perceptions of pre-service teachers to the Lesson Study idea in Science? The 12 participants completed two pre- and post-study surveys: STEBI- B, Science Teaching Efficacy Belief Instrument (Enochs & Riggs, 1990) and ASTQ, Attitude towards Science Teaching. Data sources included student teaching lesson observations, lesson debriefing notes and focus group interviews. Results from the STEBI-B show that all participants measured an increase in efficacy throughout the study. This study added to the body of research on teaching learning communities, professional development programs and teacher empowerment.

  8. Lessons Learned from the Puerto Rico Battery Energy Storage System

    Energy Technology Data Exchange (ETDEWEB)

    BOYES, JOHN D.; DE ANA, MINDI FARBER; TORRES, WENCESLANO

    1999-09-01

    The Puerto Rico Electric Power Authority (PREPA) installed a distributed battery energy storage system in 1994 at a substation near San Juan, Puerto Rico. It was patterned after two other large energy storage systems operated by electric utilities in California and Germany. The U.S. Department of Energy (DOE) Energy Storage Systems Program at Sandia National Laboratories has followed the progress of all stages of the project since its inception. It directly supported the critical battery room cooling system design by conducting laboratory thermal testing of a scale model of the battery under simulated operating conditions. The Puerto Rico facility is at present the largest operating battery storage system in the world and is successfully providing frequency control, voltage regulation, and spinning reserve to the Caribbean island. The system further proved its usefulness to the PREPA network in the fall of 1998 in the aftermath of Hurricane Georges. The owner-operator, PREPA, and the architect/engineer, vendors, and contractors learned many valuable lessons during all phases of project development and operation. In documenting these lessons, this report will help PREPA and other utilities in planning to build large energy storage systems.

  9. Massachusetts nuclear power referendum: Lessons learned from the campaign trail

    International Nuclear Information System (INIS)

    Allen, S.R.

    1989-01-01

    Last November, Massachusetts voters cast their ballots on a binding initiative which, if passed, would have prohibited the production of high-level waste, thereby permanently shutting down the state's two nuclear power plants: Yankee and Pilgrim. Question 4, as the initiative became known, posed an unprecedented challenge for the state's six major utilities. Essentially, Question 4 was defeated for two reasons: compelling arguments and a well-founded strategy for communicating those arguments. One part of that strategy was the use of debates and public-speaking engagements before both civic groups and on radio/television. These debates and presentations were clearly the most interesting part of the campaign and provided many insights that may be applied to long-term public policy and informational programs. Obviously, there is a significant difference between an intense, focused campaign and an ongoing, diverse public information program-but many of the principles are the same. The purpose of this paper is to review some of the key lessons learned from over 300 debates and presentations in the highly emotional atmosphere of the Question 4 campaign. Throughout the campaign, debaters and speakers submitted after action reports, and it is from these as well as the overall campaign results that the lessons and anecdotes are derived

  10. High-Performance Reaction Wheel Optimization for Fine-Pointing Space Platforms: Minimizing Induced Vibration Effects on Jitter Performance plus Lessons Learned from Hubble Space Telescope for Current and Future Spacecraft Applications

    Science.gov (United States)

    Hasha, Martin D.

    2016-01-01

    The Hubble Space Telescope (HST) applies large-diameter optics (2.5-m primary mirror) for diffraction-limited resolution spanning an extended wavelength range (approx. 100-2500 nm). Its Pointing Control System (PCS) Reaction Wheel Assemblies (RWAs), in the Support Systems Module (SSM), acquired an unprecedented set of high-sensitivity Induced Vibration (IV) data for 5 flight-certified RWAs: dwelling at set rotation rates. Focused on 4 key ratios, force and moment harmonic values (in 3 local principal directions) are extracted in the RWA operating range (0-3000 RPM). The IV test data, obtained under ambient lab conditions, are investigated in detail, evaluated, compiled, and curve-fitted; variational trends, core causes, and unforeseen anomalies are addressed. In aggregate, these values constitute a statistically-valid basis to quantify ground test-to-test variations and facilitate extrapolations to on-orbit conditions. Accumulated knowledge of bearing-rotor vibrational sources, corresponding harmonic contributions, and salient elements of IV key variability factors are discussed. An evolved methodology is presented for absolute assessments and relative comparisons of macro-level IV signal magnitude due to micro-level construction-assembly geometric details/imperfections stemming from both electrical drive and primary bearing design parameters. Based upon studies of same-size/similar-design momentum wheels' IV changes, upper estimates due to transitions from ground tests to orbital conditions are derived. Recommended HST RWA choices are discussed relative to system optimization/tradeoffs of Line-Of-Sight (LOS) vector-pointing focal-plane error driven by higher IV transmissibilities through low-damped structural dynamics that stimulate optical elements. Unique analytical disturbance results for orbital HST accelerations are described applicable to microgravity efforts. Conclusions, lessons learned, historical context/insights, and perspectives on future applications

  11. Should There Be an Obligation of Disclosure of Origin of Genetic Resources in Patent Applications? – Learning Lessons from Developing Countries

    Directory of Open Access Journals (Sweden)

    Graeme Laurie

    2005-06-01

    Full Text Available In the lead-up to two meetings in June 2005 which will address the question of whether there should be an obligation of disclosure of origin of genetic resources in patent applications, this paper uses the on-going international policy debate in this area as a platform both to make some specific observations about this particular issue, and to offer some comments on the broader question which it raises of how the intellectual property world integrates with other legal and ethical regimes.

  12. Preservation and Implementation of Decommissioning Lessons Learned in the United States Nuclear Regulatory Commission

    International Nuclear Information System (INIS)

    Rodriguez, Rafael L.

    2008-01-01

    Over the past several years, the United States Nuclear Regulatory Commission (NRC) has actively worked to capture and preserve lessons learned from the decommissioning of nuclear facilities. More recently, NRC has involved industry groups, the Organization of Agreement States (OAS), and the Department of Energy (DOE) in the effort to develop approaches to capture, preserve and disseminate decommissioning lessons learned. This paper discusses the accomplishments of the working group, some lessons learned by the NRC in the recent past, and how NRC will incorporate these lessons learned into its regulatory framework. This should help ensure that the design and operation of current and future nuclear facilities will result in less environmental impact and more efficient decommissioning. In summary, the NRC will continue capturing today's experience in decommissioning so that future facilities can take advantage of lessons learned from today's decommissioning projects. NRC, both individually and collectively with industry groups, OAS, and DOE, is aggressively working on the preservation and implementation of decommissioning lessons learned. The joint effort has helped to ensure the lessons from the whole spectrum of decommissioning facilities (i.e., reactor, fuel cycle, and material facilities) are better understood, thus maximizing the amount of knowledge and best practices obtained from decommissioning activities. Anticipated regulatory activities at the NRC will make sure that the knowledge gained from today's decommissioning projects is preserved and implemented to benefit the nuclear facilities that will decommission in the future

  13. 618-10 Burial Ground Trench Remediation and 618-10 and 618-11 Burial Ground Nonintrusive Characterization of Vertical Pipe Units Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Darby, J. W.

    2012-06-28

    A “lessons learned” is a noteworthy practice or innovative approach that is captured and shared to promote repeat application, or an adverse work practice/experience that is captured and shared to avoid reoccurrence. This document provides the lessons learned identified by the 618-10 Burial Ground trench remediation and the 618-10 and 618-11 Burial Ground nonintrusive characterization of the vertical pipe units (VPUs).

  14. PUREX/UO{sub 3} facilities deactivation lessons learned history

    Energy Technology Data Exchange (ETDEWEB)

    Hamrick, D.G.; Gerber, M.S.

    1995-01-01

    The Plutonium-Uranium Extraction (PUREX) Facility operated from 1956-1972, from 1983-1988, and briefly during 1989-1990 to produce for national defense at the Hanford Site in Washington State. The Uranium Trioxide (UO{sub 3}) Facility operated at the Hanford Site from 1952-1972, 1984-1988, and briefly in 1993. Both plants were ordered to permanent shutdown by the U.S. Department of Energy (DOE) in December 1992, thus initiating their deactivation phase. Deactivation is that portion of a facility`s life cycle that occurs between operations and final decontamination and decommissioning (D&D). This document details the history of events, and the lessons learned, from the time of the PUREX Stabilization Campaign in 1989-1990, through the end of the first full fiscal year (FY) of the deactivation project (September 30, 1994).

  15. Lessons learned on probabilistic methodology for precursor analyses

    International Nuclear Information System (INIS)

    Babst, Siegfried; Wielenberg, Andreas; Gaenssmantel, Gerhard

    2016-01-01

    Based on its experience in precursor assessment of operating experience from German NPP and related international activities in the field, GRS has identified areas for enhancing probabilistic methodology. These are related to improving the completeness of PSA models, to insufficiencies in probabilistic assessment approaches, and to enhancements of precursor assessment methods. Three examples from the recent practice in precursor assessments illustrating relevant methodological insights are provided and discussed in more detail. Our experience reinforces the importance of having full scope, current PSA models up to Level 2 PSA and including hazard scenarios for precursor analysis. Our lessons learned include that PSA models should be regularly updated regarding CCF data and inclusion of newly discovered CCF mechanisms or groups. Moreover, precursor classification schemes should be extended to degradations and unavailabilities of the containment function. Finally, PSA and precursor assessments should put more emphasis on the consideration of passive provisions for safety, e. g. by sensitivity cases.

  16. Lessons learned on probabilistic methodology for precursor analyses

    Energy Technology Data Exchange (ETDEWEB)

    Babst, Siegfried [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Berlin (Germany); Wielenberg, Andreas; Gaenssmantel, Gerhard [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany)

    2016-11-15

    Based on its experience in precursor assessment of operating experience from German NPP and related international activities in the field, GRS has identified areas for enhancing probabilistic methodology. These are related to improving the completeness of PSA models, to insufficiencies in probabilistic assessment approaches, and to enhancements of precursor assessment methods. Three examples from the recent practice in precursor assessments illustrating relevant methodological insights are provided and discussed in more detail. Our experience reinforces the importance of having full scope, current PSA models up to Level 2 PSA and including hazard scenarios for precursor analysis. Our lessons learned include that PSA models should be regularly updated regarding CCF data and inclusion of newly discovered CCF mechanisms or groups. Moreover, precursor classification schemes should be extended to degradations and unavailabilities of the containment function. Finally, PSA and precursor assessments should put more emphasis on the consideration of passive provisions for safety, e. g. by sensitivity cases.

  17. Development of a public health reporting data warehouse: lessons learned.

    Science.gov (United States)

    Rizi, Seyed Ali Mussavi; Roudsari, Abdul

    2013-01-01

    Data warehouse projects are perceived to be risky and prone to failure due to many organizational and technical challenges. However, often iterative and lengthy processes of implementation of data warehouses at an enterprise level provide an opportunity for formative evaluation of these solutions. This paper describes lessons learned from successful development and implementation of the first phase of an enterprise data warehouse to support public health surveillance at British Columbia Centre for Disease Control. Iterative and prototyping approach to development, overcoming technical challenges of extraction and integration of data from large scale clinical and ancillary systems, a novel approach to record linkage, flexible and reusable modeling of clinical data, and securing senior management support at the right time were the main factors that contributed to the success of the data warehousing project.

  18. Lessons learned from nuclear power plant posttrip monitoring systems

    International Nuclear Information System (INIS)

    Barasa, W.A.

    1989-01-01

    This paper discusses a program to identify common causes of unit trips and cost-effective evaluation of the options for addressing the causes. The core of the program is a living historical data base of events, based on root-cause analysis of station-specific events, that provides a means of segregating common-cause failures from random failures. Once common-cause failures at a specific plant are identified, the payback periods of the options to address a specific unit trip cause - modification, procedural changes, or status quo - can be calculated by comparing the cost of the modifications with the cost of the lost electrical production, which is also determined from the historical data base. This paper describes how the information is developed and gives examples of how the lessons learned from previous trips can be applied to the elimination of the causes

  19. Controlling changes - lessons learned from waste management facilities

    International Nuclear Information System (INIS)

    Johnson, B.M.; Koplow, A.S.; Stoll, F.E.; Waetje, W.D.

    1995-01-01

    This paper discusses lessons learned about change control at the Waste Reduction Operations Complex (WROC) and Waste Experimental Reduction Facility (WERF) of the Idaho National Engineering Laboratory (INEL). WROC and WERF have developed and implemented change control and an as-built drawing process and have identified structures, systems, and components (SSCS) for configuration management. The operations have also formed an Independent Review Committee to minimize costs and resources associated with changing documents. WROC and WERF perform waste management activities at the INEL. WROC activities include storage, treatment, and disposal of hazardous and mixed waste. WERF provides volume reduction of solid low-level waste through compaction, incineration, and sizing operations. WROC and WERF's efforts aim to improve change control processes that have worked inefficiently in the past

  20. Alzheimer's Disease: Lessons Learned from Amyloidocentric Clinical Trials.

    Science.gov (United States)

    Soejitno, Andreas; Tjan, Anastasia; Purwata, Thomas Eko

    2015-06-01

    Alzheimer's disease (AD) is one of the most debilitating neurodegenerative diseases and is predicted to affect 1 in 85 people by 2050. Despite much effort to discover a therapeutic strategy to prevent progression or to cure AD, to date no effective disease-modifying agent is available that can prevent, halt, or reverse the cognitive and functional decline of patients with AD. Several underlying etiologies to this failure are proposed. First, accumulating evidence from past trials suggests a preventive as opposed to therapeutic paradigm, and the precise temporal and mechanistic relationship of β-amyloid (Aβ) and tau protein should be elucidated to confirm this hypothesis. Second, we are in urgent need of revised diagnostic criteria to support future trials. Third, various technical and methodological improvements are required, based on the lessons learned from previous failed trials.

  1. Lessons learned in managing crowdsourced data in the Alaskan Arctic.

    Science.gov (United States)

    Mastracci, Diana

    2017-04-01

    There is perhaps no place in which the consequences of global climate change can be felt more acutely than the Arctic. However, due to lack of measurements at the high latitudes, validation processes are often problematic. Citizen science projects, co-designed together with Native communities at the interface of traditional knowledge and scientific research, could play a major role in climate change adaptation strategies by advancing knowledge of the Arctic system, strengthening inter-generational bonds and facilitating improved knowledge transfer. This presentation will present lessons learned from a pilot project in the Alaskan Arctic, in which innovative approaches were used to design climate change adaptation strategies to support young subsistence hunters in taking in-situ measurements whilst out on the sea-ice. Both the socio-cultural and hardware/software challenges presented in this presentation, could provide useful guidance for future programs that aim to integrate citizens' with scientific data in Arctic communities.

  2. [Managing digital medical imaging projects in healthcare services: lessons learned].

    Science.gov (United States)

    Rojas de la Escalera, D

    2013-01-01

    Medical imaging is one of the most important diagnostic instruments in clinical practice. The technological development of digital medical imaging has enabled healthcare services to undertake large scale projects that require the participation and collaboration of many professionals of varied backgrounds and interests as well as substantial investments in infrastructures. Rather than focusing on systems for dealing with digital medical images, this article deals with the management of projects for implementing these systems, reviewing various organizational, technological, and human factors that are critical to ensure the success of these projects and to guarantee the compatibility and integration of digital medical imaging systems with other health information systems. To this end, the author relates several lessons learned from a review of the literature and the author's own experience in the technical coordination of digital medical imaging projects. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.

  3. Lessons Learned From Developing Reactor Pressure Vessel Steel Embrittlement Database

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [ORNL

    2010-08-01

    Materials behaviors caused by neutron irradiation under fission and/or fusion environments can be little understood without practical examination. Easily accessible material information system with large material database using effective computers is necessary for design of nuclear materials and analyses or simulations of the phenomena. The developed Embrittlement Data Base (EDB) at ORNL is this comprehensive collection of data. EDB database contains power reactor pressure vessel surveillance data, the material test reactor data, foreign reactor data (through bilateral agreements authorized by NRC), and the fracture toughness data. The lessons learned from building EDB program and the associated database management activity regarding Material Database Design Methodology, Architecture and the Embedded QA Protocol are described in this report. The development of IAEA International Database on Reactor Pressure Vessel Materials (IDRPVM) and the comparison of EDB database and IAEA IDRPVM database are provided in the report. The recommended database QA protocol and database infrastructure are also stated in the report.

  4. Lessons learned form high-flux isotope reactor restart efforts

    International Nuclear Information System (INIS)

    Dahl, T.L.

    1989-01-01

    When the high-flux isotope reactor's (HFIR's) pressure vessel irradiation surveillance specimens were examined in December 1986, unexpected embrittlement was found. The resulting investigation disclosed widespread deficiencies in quality assurance and management practices. On March 24, 1987, the US Department of Energy (DOE) mandated a shutdown of all five Oak Ridge National Laboratory (ORNL) research reactors. Since the beginning of 1987, 18 different formal review groups have evaluated the management and operations of the HFIR. The root cause of the identified deficiencies in the HFIR program was defined as a lack of rigor in management practices and complacency built on twenty years of trouble-free operation. A number of lessons can be learned from the HFIR experience. Particular insight can be gained by comparing the HFIR organization prior to the shutdown with the organization that exists today. Key elements in such a comparison include staffing, funding, discipline, and formality in operations, maintenance, and management

  5. Nuclear Instrumentation and Control Cyber Testbed Considerations – Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Gray; Robert Anderson; Julio G. Rodriguez; Cheol-Kwon Lee

    2014-08-01

    Abstract: Identifying and understanding digital instrumentation and control (I&C) cyber vulnerabilities within nuclear power plants and other nuclear facilities, is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. In order to demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a testbed representing a facility’s critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar testbeds for common critical infrastructure I&C for over ten years. This experience developing, operating, and maintaining an I&C testbed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar testbed. The following information will discuss I&C testbed lessons learned and the impact of these experiences to KAERI.

  6. Nuclear Instrumentation and Control Cyber Testbed Considerations - Lessons Learned

    International Nuclear Information System (INIS)

    Jonathan, Peter Grey; Robert, S Anderson; Julio, G Rodriguez; Lee, Cheol Kwon

    2014-01-01

    Identifying and understanding digital instrumentation and control (I and C) cyber vulnerabilities within nuclear power plants and other nuclear facilities is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. To demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a test bed representing a facility's critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar test beds for common critical infrastructure I and C for over 10 years. This experience developing, operating, and maintaining an I and C test bed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar test bed. The following information will discuss I and C test bed lessons learned and the impact of these experiences to KAERI

  7. Lessons learned: advantages and disadvantages of mixed method research

    DEFF Research Database (Denmark)

    Malina, Mary A.; Nørreklit, Hanne; Selto, Frank H.

    2011-01-01

    on the use and usefulness of a specialized balanced scorecard; and third, to encourage researchers to actually use multiple methods and sources of data to address the very many accounting phenomena that are not fully understood. Design/methodology/approach – This paper is an opinion piece based...... on the authors' experience conducting a series of longitudinal mixed method studies. Findings – The authors suggest that in many studies, using a mixed method approach provides the best opportunity for addressing research questions. Originality/value – This paper provides encouragement to those who may wish......Purpose – The purpose of this paper is first, to discuss the theoretical assumptions, qualities, problems and myopia of the dominating quantitative and qualitative approaches; second, to describe the methodological lessons that the authors learned while conducting a series of longitudinal studies...

  8. Lessons learned from different approaches towards classifying personal factors.

    Science.gov (United States)

    Müller, Rachel; Geyh, Szilvia

    2015-01-01

    To examine and compare existing suggestions towards a classification of Personal Factors (PF) of the International Classification of Functioning, Disability and Health (ICF). Qualitative and quantitative content analyses of available categorizations of PF are conducted. While the eight categorizations greatly differ in their background and structure, the broad content areas covered seem to be similar and reflect the ICF definition of PF. They cover to various degrees 12 broad content areas: socio-demographic factors, behavioral and lifestyle factors, cognitive psychological factors, social relationships, experiences and biography, coping, emotional factors, satisfaction, other health conditions, biological/physiological factors, personality, motives/motivation. In comparing these categorizations, a common core of content issues for a potential ICF PF classification could be identified and valuable lessons learned. This can contribute to future classification development activities in relation to PF.

  9. Lessons Learned from the Puerto Rico Battery Energy Storage System

    Energy Technology Data Exchange (ETDEWEB)

    Boyes, John D.; De Anda, Mindi Farber; Torres, Wenceslao

    1999-08-11

    The Puerto Rico Electric Power Authority (PREPA) installed a battery energy storage system in 1994 at a substation near San Juan, Puerto Rico. It was patterned after two other large energy storage systems operated by electric utilities in California and Germany. The Puerto Rico facility is presently the largest operating battery storage system in the world and has successfully provided frequency control, voltage regulation, and spinning reseme to the Caribbean island. The system further proved its usefulness to the PREPA network in the fall of 1998 in the aftermath of Hurricane Georges. However, the facility has suffered accelerated cell failures in the past year and PREPA is committed to restoring the plant to full capacity. This represents the first repowering of a large utility battery facility. PREPA and its vendors and contractors learned many valuable lessons during all phases of project development and operation, which are summarized in this paper.

  10. Small grant management in health and behavioral sciences: Lessons learned.

    Science.gov (United States)

    Sakraida, Teresa J; D'Amico, Jessica; Thibault, Erica

    2010-08-01

    This article describes considerations in health and behavioral sciences small grant management and describes lessons learned during post-award implementation. Using the components by W. Sahlman [Sahlman, W. (1997). How to write a great business plan. Harvard Business Review, 75(4), 98-108] as a business framework, a plan was developed that included (a) building relationships with people in the research program and with external parties providing key resources, (b) establishing a perspective of opportunity for research advancement, (c) identifying the larger context of scientific culture and regulatory environment, and (d) anticipating problems with a flexible response and rewarding teamwork. Small grant management included developing a day-to-day system, building a grant/study program development plan, and initiating a marketing plan. Copyright 2010 Elsevier Inc. All rights reserved.

  11. External Police Oversight in Mexico: Experiences, Challenges, and Lessons Learned

    Directory of Open Access Journals (Sweden)

    Rubén Guzmán Sánchez

    2014-11-01

    Full Text Available After nearly 20 years of ‘reformist’ measures, the police in Mexico continues to be an ineffective, unreliable, and ‘far from citizen’ institution. The efforts made so far have faded amongst political interests and agendas; multidimensional frameworks out-dated at both conceptual and interagency levels; short-sighted competition for resources; evaluation and performance monitors that are handicapped by bureaucratic inaction; and weak transparency and accountability that perpetuate the opacity in which the police operate. In this context, the agenda of external police oversight is still at a rudimentary stage. However, there are several initiatives that have managed to push the issue to the frontier of new knowledge and promising practices. This paper outlines the experiences and challenges of—as well as the lessons learned by—the Institute for Security and Democracy (Insyde A.C., one of the most recognised think tanks in Mexico.

  12. Lessons learned from the non-proliferation experiment

    Energy Technology Data Exchange (ETDEWEB)

    McWilliam, C.; Curtis, S. [DOE, Las Vegas, NV (United States)

    1994-12-31

    The Department of Energy sponsored Non-Proliferation Experiment (formerly known as the Chemical Kiloton) involved the detonation of blasting agent approximately equivalent to one kiloton of energy release on the Nevada Test Site in an effort to determine if (and if so, which) discriminators exist between conventional and nuclear detonations of similar yield. Coordination among hundreds of scientists from at least fifteen different organizations were required to design the experiments necessary to collect and interpret data from this unique and complex event. Stakeholders and members of the Group of Scientific Experts of the Conference on Disarmament observed the progress of the experiment first hand. The experiment was a success in that a vast majority of the expected data was collected and shared quickly and efficiently throughout the international scientific community. The management of the project was discussed among the major co-sponsoring organizations and the significant {open_quotes}lessons learned{close_quotes} are presented.

  13. Lesson Learned About FPOs from a Customer`s Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Gray, C.J.

    1998-12-31

    Conoco has undertaken three FPSO (Floating Production Storage and Off-loading) projects in the 1990s, Ukpokiti offshore Nigeria, and MacCulloch and Banff in the UK sector of the North Sea. They are different in the technical and commercial solutions they employed. This presentation describes the key features of each project from a commercial and technical perspective and summarizes the good practices and those aspects that could have been improved. The key commercial areas covered include project strategy, contractor selection and leasing issues. The technical areas include facility selection, reservoir characterization, and operations. Lessons learned about Safety Management are also identified. The information about each project is limited to key features only

  14. Lessons learned from a successful MEDRETE in El Salvador.

    Science.gov (United States)

    Post, James C; Melendez, Manuel E; Hershey, Donna N; Hakim, Abdul

    2003-04-01

    Medical readiness education and training exercises are short-term exercises designed to provide health care and preventive medicine education to underserved civilian populations overseas. These high profile missions provide superb training opportunities, build democracies, and can be a powerful incentive to retain soldiers in the Reserves. Despite this, the literature offers little guidance in terms of how to best conduct a MEDRETE, particularly with a unit that has not been recently deployed. A U.S. Army Reserve unit was deployed to El Salvador following two devastating earthquakes and treated 20,890 patients in 10 days. This patient volume was achieved by a close cooperative effort among an experienced Mission Coordinator and Reservists and superb host nation support. Lessons learned regarding predeployment, deployment, patient management, and safety issues are presented to assist future units in conducting successful medical readiness education and training exercises.

  15. Pollution prevention program for new projects -- Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Lum, J. [Dept. of Energy, Washington, DC (United States)

    1993-03-01

    The purpose of this presentation is to relay the experience of the Office of New Production Reactors (NP) in developing and implementing its pollution prevention program. NP was established to plan, design, and construct a new safe and environmentally acceptable nuclear reactor capacity necessary to provide an assured supply of tritium to maintain the nation`s long-term deterrent capability. The Program offered the Department of Energy an opportunity to demonstrate its commitment to environmental protection via minimization of environmental releases; new design offers the best opportunity for pollution prevention. The NP pollution prevention program was never fully implemented because NP`s tritium production design activity was recovery terminated. The information in this paper represented lessons learned from the last three years of NP operation.

  16. Lessons Learned and Challenges in Building a Filipino Health Coalition

    Science.gov (United States)

    Aguilar, David E.; Abesamis-Mendoza, Noilyn; Ursua, Rhodora; Divino, Lily Ann M.; Cadag, Kara; Gavin, Nicholas P.

    2010-01-01

    In recent years, community-based coalitions have become an effective channel to addressing various health problems within specific ethnic communities. The purpose of this article is twofold: (a) to describe the process involved in building the Kalusugan Coalition (KC), a Filipino American health coalition based in New York City, and (b) to highlight the lessons learned and the challenges from this collaborative venture. The challenges described also offer insights on how the coalition development process can be greatly affected by the partnership with an academic institution on a community-based research project. Because each cultural group has unique issues and concerns, the theoretical framework used by KC offers creative alternatives to address some of the challenges regarding coalition infrastructures, leadership development, unexpected change of coalition dynamics, and cultural nuances. PMID:19098260

  17. PUREX/UO3 facilities deactivation lessons learned history

    International Nuclear Information System (INIS)

    Hamrick, D.G.; Gerber, M.S.

    1995-01-01

    The Plutonium-Uranium Extraction (PUREX) Facility operated from 1956-1972, from 1983-1988, and briefly during 1989-1990 to produce for national defense at the Hanford Site in Washington State. The Uranium Trioxide (UO 3 ) Facility operated at the Hanford Site from 1952-1972, 1984-1988, and briefly in 1993. Both plants were ordered to permanent shutdown by the U.S. Department of Energy (DOE) in December 1992, thus initiating their deactivation phase. Deactivation is that portion of a facility's life cycle that occurs between operations and final decontamination and decommissioning (D ampersand D). This document details the history of events, and the lessons learned, from the time of the PUREX Stabilization Campaign in 1989-1990, through the end of the first full fiscal year (FY) of the deactivation project (September 30, 1994)

  18. Remote maintenance ''lessons learned'' on prototypical reprocessing equipment

    International Nuclear Information System (INIS)

    Kring, C.T.; Schrock, S.L.

    1990-01-01

    Hardware representative of essentially every major equipment item necessary for reprocessing breeder reactor nuclear fuel has been installed and tested for remote maintainability. This testing took place in a cold mock-up of a remotely maintained hot cell operated by the Consolidated Fuel Reprocessing Program (CFRP) within the Fuel Recycle Division at Oak Ridge National Laboratory (ORNL). The reprocessing equipment tested included a Disassembly System, a Shear System, a Dissolver System, an Automated Sampler System, removable Equipment Racks on which various chemical process equipment items were mounted, and an advanced servomanipulator (ASM). These equipment items were disassembled and reassembled remotely by using the remote handling systems that are available within the cold mock-up area. This paper summarizes the ''lessons learned'' as a result of the numerous maintenance activities associated with each of these equipment items. 4 refs., 3 figs., 1 tab

  19. Overview of Fukushima accident and the lessons learned from it

    International Nuclear Information System (INIS)

    Kawano, A.

    2012-01-01

    This paper is given in order to share the detailed information on the Fukushima Accident which occurred on March 11, 2011, and the lessons learned from it which worldwide nuclear experts might currently have more interest in. The paper first reflects how the facilities were damaged by a very strong earthquake and a series of beyond design-basis tsunamis. The earthquake caused loss of all off-site electric power at Fukushima Dacha Nuclear Power Station (1F), and the following series of tsunami made all emergency diesel generators except one for Unit 6 and most of DC batteries inoperable and severely damaged most of the facilities located on the ocean side. Thus all the units at 1a resulted in the loss of cooling function and ultimate heat sink for a long time period. TEPC focused on restoration of the instruments and lights in the Main Control Room (MCR), preparation of alternative water injection and venting of Primary Containment Vessel (PCV) in the recovery process. However, the workers faced a lot of difficulties such as total darkness, repeated aftershocks, high radiation dose, a lot of debris on the ground, loss of communication means, etc. Massive damages by the tsunami and lack of necessary equipment and resources hampered a quick recovery. It eventually resulted in the severe core damage of Unit 1, 2 and 3 and also the hydrogen explosions in the reactor buildings of Unit 1, 3 and 4. This paper finally extracts the lessons learned from the accident and proposed the countermeasures, such as flood protection for essential facilities, preparation of practical and effective tools, securing communication means and so on. These would help the people involved in the nuclear industries all over the world properly understand the accident and develop their own countermeasures appropriately

  20. Human Systems Integration in Practice: Constellation Lessons Learned

    Science.gov (United States)

    Zumbado, Jennifer Rochlis

    2012-01-01

    NASA's Constellation program provided a unique testbed for Human Systems Integration (HSI) as a fundamental element of the Systems Engineering process. Constellation was the first major program to have HSI mandated by NASA's Human Rating document. Proper HSI is critical to the success of any project that relies on humans to function as operators, maintainers, or controllers of a system. HSI improves mission, system and human performance, significantly reduces lifecycle costs, lowers risk and minimizes re-design. Successful HSI begins with sufficient project schedule dedicated to the generation of human systems requirements, but is by no means solely a requirements management process. A top-down systems engineering process that recognizes throughout the organization, human factors as a technical discipline equal to traditional engineering disciplines with authority for the overall system. This partners with a bottoms-up mechanism for human-centered design and technical issue resolution. The Constellation Human Systems Integration Group (HSIG) was a part of the Systems Engineering and Integration (SE&I) organization within the program office, and existed alongside similar groups such as Flight Performance, Environments & Constraints, and Integrated Loads, Structures and Mechanisms. While the HSIG successfully managed, via influence leadership, a down-and-in Community of Practice to facilitate technical integration and issue resolution, it lacked parallel top-down authority to drive integrated design. This presentation will discuss how HSI was applied to Constellation, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers. This presentation will discuss how Human Systems Integration (HSI) was applied to NASA's Constellation program, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers on how to accomplish this critical function.

  1. Lessons learned from our accident at Fukushima nuclear power stations

    International Nuclear Information System (INIS)

    Kawano, A.

    2012-01-01

    This paper is given in order to share the detailed information on the Fukushima Accident which occurred on March 11, 2011, and the lessons learned from it which worldwide nuclear experts might currently have more interest in. The paper first reflects how the facilities were damaged by a very strong earthquake and a series of beyond design-basis tsunamis. The earthquake caused loss of all off-site electric power at Fukushima Daiichi Nuclear Power Station (1F), and the following series of tsunami made all emergency diesel generators except one for Unit 6 and most of DC batteries inoperable and severely damaged most of the facilities located on the ocean side. Thus all the units at 1F resulted in the loss of cooling function and ultimate heat sink for a long time period. TEPCO focused on restoration of the instruments and lights in the Main Control Room (MCR), preparation of alternative water injection and venting of Primary Containment Vessel (PCV) in the recovery process. However, the workers faced a lot of difficulties such as total darkness, repeated aftershocks, high radiation dose, a lot of debris on the ground, loss of communication means, etc. Massive damages by the tsunami and lack of necessary equipments and resources hampered a quick recovery. It eventually resulted in the severe core damage of Unit 1, 2, and 3 and also the hydrogen explosions in the reactor buildings of Unit 1, 3, and 4. This paper finally extracts the lessons learned from the accident and proposes the countermeasures, such as flood protection for essential facilities, preparation of practical and effective tools, securing communication means and so on. These would help the people involved in the nuclear industries all over the world properly understand the accident and develop their own countermeasures appropriately. (authors)

  2. Strategic Program Planning Lessons Learned In Developing The Long-Term Stewardship Science and Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, B.W.; Hanson, D.J.; Matthern, G.E.

    2003-04-24

    Technology roadmapping is a strategic planning method used by companies to identify and plan the development of technologies necessary for new products. The U.S. Department of Energy's Office of Environmental Management has used this same method to refine requirements and identify knowledge and tools needed for completion of defined missions. This paper describes the process of applying roadmapping to clarify mission requirements and identify enhancing technologies for the Long-Term Stewardship (LTS) of polluted sites after site cleanup has been completed. The nature of some contamination problems is such that full cleanup is not achievable with current technologies and some residual hazards remain. LTS maintains engineered contaminant barriers and land use restriction controls, and monitors residual contaminants until they no longer pose a risk to the public or the environment. Roadmapping was used to clarify the breadth of the LTS mission, to identify capability enhancements needed to improve mission effectiveness and efficiency, and to chart out the research and development efforts to provide those enhancements. This paper is a case study of the application of roadmapping for program planning and technical risk management. Differences between the planned and actual application of the roadmapping process are presented along with lessons learned. Both the process used and lessons learned should be of interest for anyone contemplating a similar technology based planning effort.

  3. Strategic Program Planning Lessons Learned in Developing the LTS S&T Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Duane Hanson; Brent Dixon; Gretchen Matthern

    2003-07-01

    Technology roadmapping is a strategic planning method used by companies to identify and plan the development of technologies necessary for new products. The U.S. Department of Energy’s Office of Environmental Management has used this same method to refine requirements and identify knowledge and tools needed for completion of defined missions. This paper describes the process of applying roadmapping to clarify mission requirements and identify enhancing technologies for the Long-Term Stewardship (LTS) of polluted sites after site cleanup has been completed. The nature of some contamination problems is such that full cleanup is not achievable with current technologies and some residual hazards remain. LTS maintains engineered contaminant barriers and land use restriction controls, and monitors residual contaminants until they no longer pose a risk to the public or the environment. Roadmapping was used to clarify the breadth of the LTS mission, to identify capability enhancements needed to improve mission effectiveness and efficiency, and to chart out the research and development efforts to provide those enhancements. This paper is a case study of the application of roadmapping for program planning and technical risk management. Differences between the planned and actual application of the roadmapping process are presented along with lessons learned. Both the process used and lessons learned should be of interest for anyone contemplating a similar technology based planning effort.

  4. Lessons Learned From Implementation of Westinghouse Owners Group Risk-Informed Inservice Inspection Methodology for Piping

    International Nuclear Information System (INIS)

    Stevenson, Paul R.; Haessler, Richard L.; McNeill, Alex; Pyne, Mark A.; West, Raymond A.

    2006-01-01

    Risk-informed inservice inspection (ISI) programs have been in use for over seven years as an alternative to current regulatory requirements in the development and implementation of ISI programs for nuclear plant piping systems. Programs using the Westinghouse Owners Group (WOG) (now known as the Pressurized Water Reactor Owners Group - PWROG) risk-informed ISI methodology have been developed and implemented within the U.S. and several other countries. Additionally, many plants have conducted or are in the process of conducting updates to their risk-informed ISI programs. In the development and implementation of these risk-informed ISI programs and the associated updates to those programs, the following important lessons learned have been identified and are addressed. Concepts such as 'loss of inventory', which are typically not modeled in a plant's probabilistic risk assessment (PRA) model for all systems. The importance of considering operator actions in the identification of consequences associated with a piping failure and the categorization of segments as high safety significant (HSS) or low safety significant (LSS). The impact that the above considerations have had on the large early release frequency (LERF) and categorization of segments as HSS or LSS. The importance of automation. Making the update process more efficient to reduce costs associated with maintaining the risk-informed ISI program. The insights gained are associated with many of the steps in the risk-informed ISI process including: development of the consequences associated with piping failures, categorization of segments, structural element selection and program updates. Many of these lessons learned have impacted the results of the risk-informed ISI programs and have impacted the updates to those programs. This paper summarizes the lessons learned and insights gained from the application of the WOG risk-informed ISI methodology in the U.S., Europe and Asia. (authors)

  5. The Nez Perce Flight to Canada: An Analysis of the Nez Perce-US Cavalry Conflicts: Applying Historical Lessons Learned to Modern Counterinsurgency and Global War on Terrorism Operations

    National Research Council Canada - National Science Library

    Pfau, Scott E

    2006-01-01

    ... Cavalry pursuit of the Nez Perce. Many of the tactics, techniques, and procedures used by the modern day warriors often derive from lessons learned in early US military confrontations, such as the Nez Perce, and are applicable...

  6. Blended learning: strengths, challenges, and lessons learned in an interprofessional training program.

    Science.gov (United States)

    Lotrecchiano, G R; McDonald, P L; Lyons, L; Long, T; Zajicek-Farber, M

    2013-11-01

    This field report outlines the goals of providing a blended learning model for an interdisciplinary training program for healthcare professionals who care for children with disabilities. The curriculum blended traditional face-to-face or on-site learning with integrated online interactive instruction. Credit earning and audited graduate level online coursework, community engagement experiences, and on-site training with maternal and child health community engagement opportunities were blended into a cohesive program. The training approach emphasized adult learning principles in different environmental contexts integrating multiple components of the Leadership Education in Neurodevelopmental and Related Disabilities Program. This paper describes the key principles adopted for this blended approach and the accomplishments, challenges, and lessons learned. The discussion offers examples from training content, material gathered through yearly program evaluation, as well as university course evaluations. The lessons learned consider the process and the implications for the role of blended learning in this type of training program with suggestions for future development and adoption by other programs.

  7. The Value of Identifying and Recovering Lost GN&C Lessons Learned: Aeronautical, Spacecraft, and Launch Vehicle Examples

    Science.gov (United States)

    Dennehy, Cornelius J.; Labbe, Steve; Lebsock, Kenneth L.

    2010-01-01

    Within the broad aerospace community the importance of identifying, documenting and widely sharing lessons learned during system development, flight test, operational or research programs/projects is broadly acknowledged. Documenting and sharing lessons learned helps managers and engineers to minimize project risk and improve performance of their systems. Often significant lessons learned on a project fail to get captured even though they are well known 'tribal knowledge' amongst the project team members. The physical act of actually writing down and documenting these lessons learned for the next generation of NASA GN&C engineers fails to happen on some projects for various reasons. In this paper we will first review the importance of capturing lessons learned and then will discuss reasons why some lessons are not documented. A simple proven approach called 'Pause and Learn' will be highlighted as a proven low-impact method of organizational learning that could foster the timely capture of critical lessons learned. Lastly some examples of 'lost' GN&C lessons learned from the aeronautics, spacecraft and launch vehicle domains are briefly highlighted. In the context of this paper 'lost' refers to lessons that have not achieved broad visibility within the NASA-wide GN&C CoP because they are either undocumented, masked or poorly documented in the NASA Lessons Learned Information System (LLIS).

  8. Lessons Learned in Preparation and Review of Safety Analysis Report of PUSPATI TRIGA Reactor in Malaysia

    International Nuclear Information System (INIS)

    Maskin, Mazleha; Choi, Kwang Sik

    2010-01-01

    PUSPATI TRIGA Reactor (RTP) is the one and only research reactor in Malaysia. Since the day it was supplied by General Atomic (GA) in 1983, periodic safety reviews were carried out but not published in the form of a complete SAR. In fact, the original SAR (SAR 1983) document was provided by GA as soon as GA was selected as the supplier of RTP. The focus of this report is on the lessons learned from the preparation of SAR. The lessons learned were to address the preparation and regulatory review of the second SAR (SAR 2006). Realizing that safety is important as RTP is aging, the experiences and lessons learned from SAR development and updating processes are of great value for all parties involved. The purpose of this report is to consolidate and organize the lessons learned and suggest the best practice for the next SAR development both in preparation and regulatory review

  9. Lessons Learned in Preparation and Review of Safety Analysis Report of PUSPATI TRIGA Reactor in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Maskin, Mazleha [Korea Advanced Institute for Science and Technology, Daejeon (Korea, Republic of); Choi, Kwang Sik [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2010-05-15

    PUSPATI TRIGA Reactor (RTP) is the one and only research reactor in Malaysia. Since the day it was supplied by General Atomic (GA) in 1983, periodic safety reviews were carried out but not published in the form of a complete SAR. In fact, the original SAR (SAR 1983) document was provided by GA as soon as GA was selected as the supplier of RTP. The focus of this report is on the lessons learned from the preparation of SAR. The lessons learned were to address the preparation and regulatory review of the second SAR (SAR 2006). Realizing that safety is important as RTP is aging, the experiences and lessons learned from SAR development and updating processes are of great value for all parties involved. The purpose of this report is to consolidate and organize the lessons learned and suggest the best practice for the next SAR development both in preparation and regulatory review

  10. Deploying Serious Games for Management in Higher Education: lessons learned and good practices

    NARCIS (Netherlands)

    Baalsrud Hauge, Jannicke; Bellotti, Francesco; Nadolski, Rob; Kickmeier-Rust, Michael; Berta, Riccardo; Carvalho, Maria B.

    2013-01-01

    Baalsrud Hauge, J., Bellotti, F., Nadolski, R. J., Kickmeier-Rust, M., Berta, R., & Carvalho, M. B. (2013, 4 October). Deploying Serious Games for Management in Higher Education: lessons learned and good practices. Presentation at ECGBL 2013, Porto, Portugal.

  11. Lessons Learned from the Node 1 Temperature and Humidity Control Subsystem Design

    Science.gov (United States)

    Williams, David E.

    2010-01-01

    Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Temperature and Humidity Control (THC) subsystem and it will document some of the lessons that have been learned to date for this subsystem and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs. 1

  12. Best Practices and Lessons Learned In LANL Approaches to Transportation Security

    Energy Technology Data Exchange (ETDEWEB)

    Drypolcher, Katherine Carr [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-24

    Presentation includes slides on Physical Protection of Material in Transit; Graded Approach for Implementation Controls; Security Requirements; LANL Lessons Learned; Shipping Violation; Unmonitored Shipment; Foreign shipment; and the Conclusion.

  13. IVHS Institutional Issues and Case Studies, Analysis and Lessons Learned, Final Report

    Science.gov (United States)

    1994-04-01

    This 'Analysis and Lessons Learned' report contains observations, conclusions, and recommendations based on the performance of six case studies of Intelligent Vehicle-Highway Systems (IVHS) projects. Information to support the development of the case...

  14. Systemwide Deployment of Medical Team Training: Lessons Learned in the Department of Defense

    National Research Council Canada - National Science Library

    King, Heidi B; Kohsin, Beth; Salisbury, Mary

    2005-01-01

    .... Lessons learned within the U.S. Department of Defense indicate that for teamwork initiatives to be effective, they must possess a clear blueprint defining the solid steps for building the desired culture...

  15. Preparing for the Worst: Psychological Excellence of First Responders - A Katrina Lessons Learned Study

    National Research Council Canada - National Science Library

    Seong, Younho; Springs, Sherry; Chung, Yongchul; Avery-Epps, Regina

    2008-01-01

    ... formidable disaster. In fact, there have been several official lessons learned reports and the findings and recommendations from these reports of the response to Hurricane Katrina have been addressed...

  16. Evolutionary Acquisition of the Global Command and Control System: Lessons Learned

    National Research Council Canada - National Science Library

    Wallis, Johnathan

    1998-01-01

    This paper summarizes a "lessons learned" study that reviews DoD's approach to managing the GCCS program on behalf on the Assistant Secretary of Defense for Command, Control, Communications, and Intelligence (ASD/C3I...

  17. Lessons Learned from Developing and Operating the Kepler Science Pipeline and Building the TESS Science Pipeline

    Science.gov (United States)

    Jenkins, Jon M.

    2017-01-01

    The experience acquired through development, implementation and operation of the KeplerK2 science pipelines can provide lessons learned for the development of science pipelines for other missions such as NASA's Transiting Exoplanet Survey Satellite, and ESA's PLATO mission.

  18. SRS SLUDGE BATCH QUALIFICATION AND PROCESSING; HISTORICAL PERSPECTIVE AND LESSONS LEARNED

    Energy Technology Data Exchange (ETDEWEB)

    Cercy, M.; Peeler, D.; Stone, M.

    2013-09-25

    This report provides a historical overview and lessons learned associated with the SRS sludge batch (SB) qualification and processing programs. The report covers the framework of the requirements for waste form acceptance, the DWPF Glass Product Control Program (GPCP), waste feed acceptance, examples of how the program complies with the specifications, an overview of the Startup Program, and a summary of continuous improvements and lessons learned. The report includes a bibliography of previous reports and briefings on the topic.

  19. TMI-2: Lessons learned by the US Department of Energy: A programmatic perspective

    International Nuclear Information System (INIS)

    Schmitt, R.C.; Reno, H.W.; Bentley, K.J.; Owens, D.E.

    1990-03-01

    This report is a summary of the lessons learned by the US Department of Energy during its decade-long participation in the research and accident cleanup project at Three Mile Island Nuclear Power Station Unit 2 near Harrisburg, Pennsylvania. It is based on a review of a wide range of project documents and interviews with personnel from the many organizations involved. The lessons are organized into major subjects with a brief background section to orient the reader to that subject. The subjects are divided into sub-topics, each with a brief discussion and a series of lessons learned. The lessons are very brief and each is preceded with a keyword phrase to highlight its specific topic. References are given so that the details of the subject and the lesson can be further investigated. 99 refs., 24 figs

  20. From the Games Industry: Ten Lessons for Game-Based Learning

    Science.gov (United States)

    Hollins, Paul; Whitton, Nicola

    2011-01-01

    This paper draws on lessons learned from the development process of the entertainment games industry and discusses how they can be applied to the field of game-based learning. This paper examines policy makers and those wishing to commission or develop games for learning and highlights potential opportunities as well as pitfalls. The paper focuses…

  1. Building Accessible Educational Web Sites: The Law, Standards, Guidelines, Tools, and Lessons Learned

    Science.gov (United States)

    Liu, Ye; Palmer, Bart; Recker, Mimi

    2004-01-01

    Professional education is increasingly facing accessibility challenges with the emergence of webbased learning. This paper summarizes related U.S. legislation, standards, guidelines, and validation tools to make web-based learning accessible for all potential learners. We also present lessons learned during the implementation of web accessibility…

  2. Lessons Learned From Dynamic Simulations of Advanced Fuel Cycles

    International Nuclear Information System (INIS)

    Piet, Steven J.; Dixon, Brent W.; Jacobson, Jacob J.; Matthern, Gretchen E.; Shropshire, David E.

    2009-01-01

    Years of performing dynamic simulations of advanced nuclear fuel cycle options provide insights into how they could work and how one might transition from the current once-through fuel cycle. This paper summarizes those insights from the context of the 2005 objectives and goals of the Advanced Fuel Cycle Initiative (AFCI). Our intent is not to compare options, assess options versus those objectives and goals, nor recommend changes to those objectives and goals. Rather, we organize what we have learned from dynamic simulations in the context of the AFCI objectives for waste management, proliferation resistance, uranium utilization, and economics. Thus, we do not merely describe 'lessons learned' from dynamic simulations but attempt to answer the 'so what' question by using this context. The analyses have been performed using the Verifiable Fuel Cycle Simulation of Nuclear Fuel Cycle Dynamics (VISION). We observe that the 2005 objectives and goals do not address many of the inherently dynamic discriminators among advanced fuel cycle options and transitions thereof

  3. Tunneling on the Yucca Mountain Project: Progress and lessons learned

    International Nuclear Information System (INIS)

    Hansmire, W.H.; Rogers, D.J.; Wightman, W.D.

    1996-01-01

    The Yucca Mountain Site Characterization Project is the US's effort to confirm the technical acceptability of Yucca Mountain as a repository for high-level nuclear waste. A key part of the site characterization project is the construction of a 7.8-km-long, 7.6-m-diameter tunnel for in-depth geologic and other scientific investigations. The work is governed in varying degrees by the special requirements for nuclear quality assurance, which imposes uncommon and often stringent limitations on the materials which can be used in construction, the tunneling methods and procedures used, and record-keeping for many activities. This paper presents the current status of what has been learned, how construction has adapted to meet the requirements, and how the requirements were interpreted in a mitigating way to meet the legal obligations, yet build the tunnel as rapidly as possible. With regard to design methodologies and the realities of tunnel construction, ground support with a shielded Tunnel Boring Machine is discussed. Notable lessons learned include the need for broad design analyses for a wide variety of conditions and how construction procedures affect ground support

  4. Defining a risk-informed framework for whole-of-government lessons learned: A Canadian perspective.

    Science.gov (United States)

    Friesen, Shaye K; Kelsey, Shelley; Legere, J A Jim

    Lessons learned play an important role in emergency management (EM) and organizational agility. Virtually all aspects of EM can derive benefit from a lessons learned program. From major security events to exercises, exploiting and applying lessons learned and "best practices" is critical to organizational resilience and adaptiveness. A robust lessons learned process and methodology provides an evidence base with which to inform decisions, guide plans, strengthen mitigation strategies, and assist in developing tools for operations. The Canadian Safety and Security Program recently supported a project to define a comprehensive framework that would allow public safety and security partners to regularly share event response best practices, and prioritize recommendations originating from after action reviews. This framework consists of several inter-locking elements: a comprehensive literature review/environmental scan of international programs; a survey to collect data from end users and management; the development of a taxonomy for organizing and structuring information; a risk-informed methodology for selecting, prioritizing, and following through on recommendations; and standardized templates and tools for tracking recommendations and ensuring implementation. This article discusses the efforts of the project team, which provided "best practice" advice and analytical support to ensure that a systematic approach to lessons learned was taken by the federal community to improve prevention, preparedness, and response activities. It posits an approach by which one might design a systematic process for information sharing and event response coordination-an approach that will assist federal departments to institutionalize a cross-government lessons learned program.

  5. The layered learning practice model: Lessons learned from implementation.

    Science.gov (United States)

    Pinelli, Nicole R; Eckel, Stephen F; Vu, Maihan B; Weinberger, Morris; Roth, Mary T

    2016-12-15

    Pharmacists' views about the implementation, benefits, and attributes of a layered learning practice model (LLPM) were examined. Eligible and willing attending pharmacists at the same institution that had implemented an LLPM completed an individual, 90-minute, face-to-face interview using a structured interview guide developed by the interdisciplinary study team. Interviews were digitally recorded and transcribed verbatim without personal identifiers. Three researchers independently reviewed preliminary findings to reach consensus on emerging themes. In cases where thematic coding diverged, the researchers discussed their analyses until consensus was reached. Of 25 eligible attending pharmacists, 24 (96%) agreed to participate. The sample was drawn from both acute and ambulatory care practice settings and all clinical specialty areas. Attending pharmacists described several experiences implementing the LLPM and perceived benefits of the model. Attending pharmacists identified seven key attributes for hospital and health-system pharmacy departments that are needed to design and implement effective LLPMs: shared leadership, a systematic approach, good communication, flexibility for attending pharmacists, adequate resources, commitment, and evaluation. Participants also highlighted several potential challenges and obstacles for organizations to consider before implementing an LLPM. According to attending pharmacists involved in an LLPM, successful implementation of an LLPM required shared leadership, a systematic approach, communication, flexibility, resources, commitment, and a process for evaluation. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  6. Lessons-learned from ongoing decommissioning project of Fugen NPS

    International Nuclear Information System (INIS)

    Tezuka, M.; Koda, Y.; Iguchi, Y.; Kato, Y.; Yanagihara, S.

    2017-01-01

    .g., narrow calf width leading to the reduction of secondary waste and remote-handle ability by using fiber laser. But this method has not yet been applied to reactor facilities throughout the world. Therefore for the safe and reliable dismantlement, laser cutting system in air will be organized and demonstration examinations to some equipment except core area will be carried out. Moreover, laser cutting system underwater should be also organized, taking a safety assessment data such as behavior of cutting dust. In the final stage, after inspection of dismantling procedure using mock-up device, after the core area is planning to be dismantled. This indicates an example of lessons-learned for the process of how the decommissioning program is planned and R and D for suitable technologies are implemented and they are applied to the final dismantlement process. (authors)

  7. Supply chain management/ Some lessons learned the hard way.

    Science.gov (United States)

    Nuttall, Stephen

    2013-01-01

    This paper will look at some of the experiences, lessons and frustrations experienced in managing supply chains for business continuity. No-one has time to make all the mistakes, nor to learn all the lessons on their own, so it is useful to share experiences. Over the last 25 years, the author has been involved in supply chain management as a contract manager; a programme and project manager; and as a business continuity manager. Although times change, there are some fundamental principles that are absolutely critical in making sure that supply chains do what they are needed to do/ to keep business going. Supply chains are here to stay. Indeed, with today's drive towards outsourcing, best-shoring and contracting out, they are becoming more important every year and this will only continue over time. Moreover, in the highly competitive markets in which all organisations operate, suppliers may well be carrying out operations that not all that long ago would have been considered to be part of core business. Getting the right relationship with the supply chain is more critical than ever before.1 What does this mean to business continuity professionals? They need to think not just about their own BC plans, but about the plans of their suppliers, and even those of their suppliers' suppliers. This may seem obvious, but unlike internal BC plans written by and for an organisation, it must be considered just what a supplier's plans are designed to achieve. What business outcomes will their plans deliver? If they recover their own business, how does that affect the business they serve? Are others' assumptions of how they will react in line with theirs?

  8. Polio Crisis in Costa Rica: Lessons Learned and Achievements

    Directory of Open Access Journals (Sweden)

    Gioconda Vargas-Morúa

    2015-05-01

    Full Text Available This presentation shows some of the consequences of the polio crisis in Costa Rica during the 1950’s, in order to preserve certain attitudes of Costa Ricans back then that are worth remembering: simplicity, solidarity and gratefulness. Hand in hand with highly service-oriented men and women, the country overcame the crisis and built one of the most iconic hospitals in Costa Rica: the National Children’s Hospital. It is worth rescuing the lessons learned and applying them to current times. This historical text was created based on the stories told by people who lived during the times of the crisis, on a 1956 notebook, on documents from the National Archive and the National Health and Social Security Library (BINASSS, for its name in Spanish, the Costa Rican Social Security System (CCSS, for its name in Spanish, Dr. Rodolfo Álvaro Murillo, and San Juan de Dios Hospital.  National and international newspapers were also reviewed. The consulted material confirms how the work of Costa Ricans, led by committed and service-oriented individuals, allowed for the construction of the National Children’s Hospital to take place -an institution that has served the Costa Rican people for fifty years. Costa Ricans also succeeded in eradicating polio long before several other countries around the world. The reactions of people in the 1950’s are lessons of solidarity and humanity that should not be forgotten; they should be remembered in order to value team work over individual work and make sure, no matter what our role in society is, to always stand by common well-being, as mid-century Costa Ricans did by overcoming their personal limitations and acting for the benefit of society.

  9. Commercial Aircraft Pricing: Application of Lessons Learned

    Science.gov (United States)

    2017-12-01

    Given this, and the 45 Sean Broderick , “Boeing Revives Emphasis On Post-Delivery Business...web.stanford.edu/~lanierb/research/Dynamic_Aircraft_RES.pdf. Broderick , Sean. “Boeing Revives Emphasis On Post-Delivery Business.” Inside MRO, MRO

  10. Bringing authentic service learning to the classroom: benefits and lessons learned

    Science.gov (United States)

    Chamberlain, Leslie C.

    2016-06-01

    Project-based learning, which has gained significant attention within K-12 education, provides rich hands-on experiences for students. Bringing an element of service to the projects allow students to engage in a local or global community, providing an abundance of benefits to the students’ learning. For example, service projects build confidence, increase motivation, and exercise problem-solving and communication skills in addition to developing a deep understanding of content. I will present lessons I have learned through four years of providing service learning opportunities in my classroom. I share ideas for astronomy projects, tips for connecting and listening to a community, and helpful guidelines to hold students accountable in order to ensure a productive and educational project.

  11. Lessons learned from a landslide catastrophe in Rio de Janeiro, Brazil.

    Science.gov (United States)

    Pereira, Bruno Monteiro Tavares; Morales, Wellington; Cardoso, Ricardo Galesso; Fiorelli, Rossano; Fraga, Gustavo Pereira; Briggs, Susan M

    2013-01-01

    On January, 2011, a devastating tropical storm hit the mountain area of Rio de Janeiro State in Brazil, resulting in flooding and mudslides and leaving 30,000 individuals displaced. This article explores key lessons learned from this major mass casualty event, highlighting prehospital and hospital organization for receiving multiple victims in a short period of time, which may be applicable in similar future events worldwide. A retrospective review of local hospital medical/fire department records and data from the Health and Security Department of the State were analyzed. Medical examiner archives were analyzed to determine the causes of death. The most common injuries were to the extremities, the majority requiring only wound cleaning, debridement, and suture. Orthopedic surgeries were the most common operative procedures. In the first 3 days, 191 victims underwent triage at the hospital with 50 requiring admission to the hospital. Two hundred fifty patients were triaged at the hospital by the end of the fifth day. The mortis cause for the majority of deaths was asphyxia, either by drowning or mud burial. Natural disasters are able to generate a large number of victims and overwhelm the main channels of relief available. Main lessons learned are as follows: 1) prevention and training are key points, 2) key measures by the authorities should be taken as early as possible, and 3) the centralization of the deceased in one location demonstrated greater effectiveness identifying victims and releasing the bodies back to families.

  12. Lessons learned in digital upgrade projects digital control system implementation at US nuclear power stations

    International Nuclear Information System (INIS)

    Kelley, S.; Bolian, T. W.

    2006-01-01

    AREVA NP has gained significant experience during the past five years in digital upgrades at operating nuclear power stations in the US. Plants are seeking modernization with digital technology to address obsolescence, spare parts availability, vendor support, increasing age-related failures and diminished reliability. New systems offer improved reliability and functionality, and decreased maintenance requirements. Significant lessons learned have been identified relating to the areas of licensing, equipment qualification, software quality assurance and other topics specific to digital controls. Digital control systems have been installed in non safety-related control applications at many utilities within the last 15 years. There have also been a few replacements of small safety-related systems with digital technology. Digital control systems are proving to be reliable, accurate, and easy to maintain. Digital technology is gaining acceptance and momentum with both utilities and regulatory agencies based upon the successes of these installations. Also, new plants are being designed with integrated digital control systems. To support plant life extension and address obsolescence of critical components, utilities are beginning to install digital technology for primary safety-system replacement. AREVA NP analyzed operating experience and lessons learned from its own digital upgrade projects as well as industry-wide experience to identify key issues that should be considered when implementing digital controls in nuclear power stations

  13. Review of the generic aging lessons learned (GALL) report for U.S. NPPs

    International Nuclear Information System (INIS)

    Gong Yi; Dou Yikang

    2014-01-01

    Generic aging lessons learned (GALL) report is a technical basis document issued by U.S. nuclear regulatory commission (NRC) for guiding the review of license renewal application (LRA) of its domestic nuclear power plants (NPPs). By form of tabulations, GALL report addresses the correlation among materials, environments, aging effects/mechanisms, and aging management programs (AMPs) from the level of specific structures and/or components. Based on literature investigation and analysis, the essential information of GALL report in the aspects of background, development history, content framework, and application was reviewed in this paper, which should be the first time in China and would have reference value for establishment of both the AMPs and the nuclear safety regulations of extending the lifetime of its NPPs. (authors)

  14. Lessons Learned From 104 Years of Mobile Observatories

    Science.gov (United States)

    Miller, S. P.; Clark, P. D.; Neiswender, C.; Raymond, L.; Rioux, M.; Norton, C.; Detrick, R.; Helly, J.; Sutton, D.; Weatherford, J.

    2007-12-01

    As the oceanographic community ventures into a new era of integrated observatories, it may be helpful to look back on the era of "mobile observatories" to see what Cyberinfrastructure lessons might be learned. For example, SIO has been operating research vessels for 104 years, supporting a wide range of disciplines: marine geology and geophysics, physical oceanography, geochemistry, biology, seismology, ecology, fisheries, and acoustics. In the last 6 years progress has been made with diverse data types, formats and media, resulting in a fully-searchable online SIOExplorer Digital Library of more than 800 cruises (http://SIOExplorer.ucsd.edu). Public access to SIOExplorer is considerable, with 795,351 files (206 GB) downloaded last year. During the last 3 years the efforts have been extended to WHOI, with a "Multi-Institution Testbed for Scalable Digital Archiving" funded by the Library of Congress and NSF (IIS 0455998). The project has created a prototype digital library of data from both institutions, including cruises, Alvin submersible dives, and ROVs. In the process, the team encountered technical and cultural issues that will be facing the observatory community in the near future. Technological Lessons Learned: Shipboard data from multiple institutions are extraordinarily diverse, and provide a good training ground for observatories. Data are gathered from a wide range of authorities, laboratories, servers and media, with little documentation. Conflicting versions exist, generated by alternative processes. Domain- and institution-specific issues were addressed during initial staging. Data files were categorized and metadata harvested with automated procedures. With our second-generation approach to staging, we achieve higher levels of automation with greater use of controlled vocabularies. Database and XML- based procedures deal with the diversity of raw metadata values and map them to agreed-upon standard values, in collaboration with the Marine Metadata

  15. Lessons learned at Lower East Fork Poplar Creek, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Burch, K.L.; Page, D.G.

    1996-01-01

    The US Department of Energy (DOE) used several innovative strategies and technologies in conducting the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) activities for the Lower East Fork Poplar Creek (EFPC) Operable Unit (OU) in Oak Ridge, Tennessee. These innovations helped to cost-effectively characterize the 270-ha (670-acre), 23.3-km (14.5-mile) floodplain and to obtain a 400-parts per million (ppm) cleanup level for mercury in soil. Lessons learned during the project involve management, investigation, and risk assessment strategies and techniques. Management lessons learned include (a) how to handle the large OU, (b) how to effectively involve the community in decisions, and (c) how to select a remedy that incorporates the needs of many involved agencies. Investigation lessons learned include (a) how to design an effective sampling strategy for the site, (b) how to cost-effectively analyze a large number of samples, and (c) which of several treatment technologies is best-suited to the site. Risk assessment lessons learned include (a) how to determine an appropriate cleanup level for human health and the environment, (b) how to quantify uncertainty in the human health risk assessment, (c) how to reconcile different solubilities of different mercury species, and (d) how to best conduct the ecological risk assessment. Other CERCLA sites can benefit from lessons learned during this project whether still in the investigative stage or further along in the process. Applying these lessons can substantially reduce costs and make more efficient use of Superfund resources

  16. Experience gained from fires in nuclear power plants: Lessons learned

    International Nuclear Information System (INIS)

    2004-11-01

    In 1993, the IAEA launched a programme to assist Member States in improving fire safety in nuclear power plants (NPPs). The review of fire safety assessment in many plants has shown that fire is one of the most important risk contributors for NPPs. Moreover, operational experience has confirmed that many events have a similar root cause, initiation and development mechanism. Therefore, many States have improved the analysis of their operational experience and its feedback. States that operate NPPs play an important role in the effort to improve fire safety by circulating their experience internationally - this exchange of information can effectively prevent potential events. When operating experience is well organized and made accessible, it can feed an improved fire hazard assessment on a probabilistic basis. The practice of exchanging operational experience seems to be bearing fruit: serious events initiated by fire are on the decline at plants in operating States. However, to maximize this effort, means for communicating operational experience need to be continuously improved and the pool of recipients of operational experience data enlarged. The present publication is the third in a series started in 1998 on fire events, the first two were: Root Cause Analysis for Fire Events (IAEA-TECDOC-1112) and Use of Operational Experience in Fire Safety Assessment of Nuclear Power Plants (IAEA-TECDOC-1134). This TECDOC summarizes the experience gained and lessons learned from fire events at operating plants, supplemented by specific Member State experiences. In addition, it provides a possible structure of an international fire and explosion event database aimed at the analysis of experience from fire events and the evaluation of fire hazard. The intended readership of this is operators of plants and regulators. The present report includes a detailed analysis of the most recent events compiled with the IAEA databases and other bibliographic sources. It represents a

  17. Learning lessons from natural disasters - sectorial or holistic perspectives?

    Science.gov (United States)

    Johansson, M.; Blumenthal, B.; Nyberg, L.

    2009-04-01

    Lessons learning from systematic analyses of past natural disasters is of great importance for future risk reduction and vulnerability management. It is one crucial piece of a puzzle towards disaster resilient societies, together with e.g. models of future emerging climate-related risks, globalization or demographic changes. Systematic analyses of impact and management of past events have commonly been produced in many sectors, but the knowledge is seldom shared outside the own organization or produced for other actors. To increase the availability of reports and documents, the Swedish Rescue Services Agency has created the Swedish Natural Hazards Information System, in accordance with a government commission from 2005. The system gathers accident reports, investigations and in-depth analyses, together with societal additional costs and mappings of consequences from central and local governments, NGO's and private actors. Evaluation of the collection reveals large differences in quality, systematic approach, depth and extent, clearly consistent with the lack of coherent harmonization of investigation and reporting approaches. Type of hazard, degree of impact and time elapsed since present are decisive for the collected volume. LPHC (low probability high consequences) disasters usually comprise most data and analytical activities, since they often are met with surprise and highlight the failure to integrate resilience into normal societal planning. During the last 50 years, several LPHC events in Sweden have functioned as alarm clocks and entailed major changes and improvements in government policies or legislations, safety management systems, risk assessments, response training, stakeholder communication, etc. Such an event occurred in January 2005 when Northern Europe was confronted with one of the most severe storms in modern history. Accidents that caused 24 fatalities occurred (17 in Sweden), several regions in UK and Germany were flooded and extensive areas of

  18. A Lesson about the Circular Flow. Active Learning Lessons. Economics International.

    Science.gov (United States)

    Landfried, Janet

    This lesson plan was developed through "Economics International," an international program to help build economic education infrastructures in the emerging market economies. It provides a lesson description; appropriate grade level; economic concepts; content standards and benchmarks; related subjects; instructional objectives; time…

  19. LESSONS LEARNED IN OPERATING THE HOSE-IN-HOSE SYSTEM FOR TRANSFSERRING SLUDGE AT HANFORD'S K BASINS

    International Nuclear Information System (INIS)

    PERES MW

    2008-01-01

    In May 2007, the Department of Energy and the Fluor Hanford K Basin Closure Project completed transferring sludge from the K East Basin to new containers in the K West Basin using a Hose-in-Hose system. This project presented a number of complex and unique technical, operational, and management challenges that had to be resolved to complete the required transfers and satisfy project milestones. The project team (including DOE; regulators; and Fluor management, operations, maintenance, engineering and all other support organizations) found innovative solutions to each challenge. This paper records lessons learned during the operational phase of the sludge transfer via the Hose-In-Hose system. The subject is limited to the operational phase and does not cover design, development, testing or turnover. A discussion of the situation or problem encountered is provided, along with the lesson learned as applicable to a future program or project

  20. The Teaching and Learning Environment SAIDA: Some Features and Lessons.

    Science.gov (United States)

    Grandbastien, Monique; Morinet-Lambert, Josette

    Written in ADA language, SAIDA, a Help System for Data Implementation, is an experimental teaching and learning environment which uses artificial intelligence techniques to teach a computer science course on abstract data representations. The application domain is teaching advanced programming concepts which have not received much attention from…

  1. Lessons Learned from the Jefferson Lab - SNS Cryomodule Production Run

    International Nuclear Information System (INIS)

    John Hogan; Edward Daly; John Fischer; Joseph Preble

    2005-01-01

    In light of the recent developments with the International Linear Collider (ILC), and the recommendation to utilize ''Cold'' technology for this future particle accelerator, this paper will present the lessons learned from the recently concluded Spallation Neutron Source (SNS) superconducting radio frequency (SRF) cryomodule production run at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). Over the past twenty years Jefferson Lab has worked with industry to successfully design, manufacture, test and commission more SRF cryomodules than any other entity in the United States. The knowledge gained from the design and fabrication of the SNS prototype, eleven - 0.61 (medium) beta and the twelve - 0.81 (high) beta cryomodules, will prove to be an effective asset to the ILC project. After delivery of the final production cryomodule in March 2005, design and fabrication data will be collected, evaluated and presented to make this information beneficial for future particle accelerator projects. Recommendations with respect to these findings will also be presented as an integral part of this paper

  2. Computerisation of procedures. Lessons learned and future perspectives

    International Nuclear Information System (INIS)

    O'Hara, J.; Pirus, D.; Nilsen, S.; Bisio, R.; Hulsund, J.-E.; Zhang, W.

    2003-07-01

    The computerisation of the procedures has been investigated for several years. Even though guidelines for such computerisation have been proposed, there is a need to extend and revise these guidelines. In this report, we look at what has been achieved so far, both within the Halden Project as well as within other organisations related to nuclear power plants. These experiences are often related to testing of particular computerised procedure systems either in research laboratories or in nuclear utilities. These activities have accumulated a body of general knowledge on the subject, as documented in other 'lessons learned' reports of the past. This report will extend this accepted body of knowledge. Furthermore, we identify the unresolved problems that need to be further studied to make usable computerised procedures for the future. The report identifies selected qualities that should be reinforced to make computerised procedure systems better. In particular, the integration aspect is emphasised. A flexible integration with the operator tasks and the remaining interfaces of the control room is important. Unless this integration is accomplished, the computerised procedures will not be functional. Another aspect of integration is combination with other systems inclusive those systems that deal with the plant documentation, electronic or paper based. This kind of integration is important to the safe and reliable operation of the plant. Good integration with plant documentation is instrumental in creating reliable QA of the procedures that covers the whole life cycle of the procedure. (Author). 48 refs., 12 figs., 2 tabs

  3. Lessons learned from recent geomagnetic disturbance model validation activities

    Science.gov (United States)

    Pulkkinen, A. A.; Welling, D. T.

    2017-12-01

    Due to concerns pertaining to geomagnetically induced current impact on ground-based infrastructure, there has been significantly elevated interest in applying models for local geomagnetic disturbance or "delta-B" predictions. Correspondingly there has been elevated need for testing the quality of the delta-B predictions generated by the modern empirical and physics-based models. To address this need, community-wide activities were launched under the GEM Challenge framework and one culmination of the activities was the validation and selection of models that were transitioned into operations at NOAA SWPC. The community-wide delta-B action is continued under the CCMC-facilitated International Forum for Space Weather Capabilities Assessment and its "Ground Magnetic Perturbations: dBdt, delta-B, GICs, FACs" working group. The new delta-B working group builds on the past experiences and expands the collaborations to cover the entire international space weather community. In this paper, we discuss the key lessons learned from the past delta-B validation exercises and lay out the path forward for building on those experience under the new delta-B working group.

  4. Management of cervical spine injuries in young children: lessons learned.

    Science.gov (United States)

    Smith, Jodi L; Ackerman, Laurie L

    2009-07-01

    Previous studies have shown that the correct use of car safety seats can protect infants and children from vehicular injury. Although child passenger devices are increasingly used in the US, motor vehicle crashes continue to be the leading cause of death and acquired disability in infants and children younger than 14 years of age. These events are likely related, at least in part, to the high percentage of children who are unrestrained or improperly restrained. The authors present 2 cases of severe cervical spine trauma in young children restrained in car safety seats during a motor vehicle crash: 1) a previously healthy 14-month-old girl who was improperly restrained in a forward-facing booster seat secured to the vehicle by a lap belt, and 2) a previously healthy 30-month-old girl who was a rear seat passenger restrained in a car safety seat. This study points out the unique challenges encountered in treating cervical spine injuries in infants and young children, as well as the lessons learned, and emphasizes the significance of continuing efforts to increase family and public awareness regarding the importance of appropriate child safety seat selection and use.

  5. Lessons learned about art-based approaches for disseminating knowledge.

    Science.gov (United States)

    Bruce, Anne; Makaroff, Kara L Schick; Sheilds, Laurene; Beuthin, Rosanne; Molzahn, Anita; Shermak, Sheryl

    2013-01-01

    To present a case example of using an arts-based approach and the development of an art exhibit to disseminate research findings from a narrative research study. Once a study has been completed, the final step of dissemination of findings is crucial. In this paper, we explore the benefits of bringing nursing research into public spaces using an arts-based approach. Findings from a qualitative narrative study exploring experiences of living with life-threatening illnesses. Semi-structured in-depth interviews were conducted with 32 participants living with cancer, chronic renal disease, or HIV/AIDS. Participants were invited to share a symbol representing their experience of living with life-threatening illness and the meaning it held for them. The exhibit conveyed experiences of how people story and re-story their lives when living with chronic kidney disease, cancer or HIV. Photographic images of symbolic representations of study participants' experiences and poetic narratives from their stories were exhibited in a public art gallery. The theoretical underpinning of arts-based approaches and the lessons learned in creating an art exhibit from research findings are explored. Creative art forms for research and disseminating knowledge offer new ways of understanding and knowing that are under-used in nursing. Arts-based approaches make visible patients' experiences that are often left unarticulated or hidden. Creative dissemination approaches such as art exhibits can promote insight and new ways of knowing that communicate nursing research to both public and professional audiences.

  6. Space Stirling Cryocooler Contamination Lessons Learned and Recommended Control Procedures

    Science.gov (United States)

    Glaister, D. S.; Price, K.; Gully, W.; Castles, S.; Reilly, J.

    The most important characteristic of a space cryocooler is its reliability over a lifetime typically in excess of 7 years. While design improvements have reduced the probability of mechanical failure, the risk of internal contamination is still significant and has not been addressed in a consistent approach across the industry. A significant fraction of the endurance test and flight units have experienced some performance degradation related to internal contamination. The purpose of this paper is to describe and assess the contamination issues inside long life, space cryocoolers and to recommend procedures to minimize the probability of encountering contamination related failures and degradation. The paper covers the sources of contamination, the degradation and failure mechanisms, the theoretical and observed cryocooler sensitivity, and the recommended prevention procedures and their impact. We begin with a discussion of the contamination sources, both artificial and intrinsic. Next, the degradation and failure mechanisms are discussed in an attempt to arrive at a contaminant susceptibility, from which we can derive a contamination budget for the machine. This theoretical sensitivity is then compared with the observed sensitivity to illustrate the conservative nature of the assumed scenarios. A number of lessons learned on Raytheon, Ball, Air Force Research Laboratory, and NASA GSFC programs are shared to convey the practical aspects of the contamination problem. Then, the materials and processes required to meet the proposed budget are outlined. An attempt is made to present a survey of processes across industry.

  7. Provider-Sponsored Health Plans: Lessons Learned over Three Decades.

    Science.gov (United States)

    Breon, Richard C

    2016-01-01

    Healthcare's movement to value-based care is causing health systems across the country to consider whether owning or partnering with a health plan could benefit their organizations. Although organizations have different reasons for wanting to enter the insurance business, potential benefits include improving care quality, lowering costs, managing population health, expanding geographic reach, and diversifying the organization's revenue stream. However, the challenges and risks of owning a health plan are formidable: Assuming 100 percent financial risk for a patient population requires considerable financial resources, as well as competencies that are wholly different from those needed to run a hospital or physician group. For Spectrum Health, an integrated, not-for-profit health system based in Grand Rapids, Michigan, owning a health plan has been vital to fulfilling its mission of improving the health of the communities it serves, as well as its value proposition of providing highquality care at lower costs. This article weighs the pros and cons of operating a health plan; explores key business factors and required competencies that organizations need to consider when deciding whether to buy, build, or partner; examines the current environment for provider-sponsored health plans; and shares some of the lessons Spectrum Health has learned over three decades of running its health plan, Priority Health.

  8. SAGE III on ISS Lessons Learned on Thermal Interface Design

    Science.gov (United States)

    Davis, Warren

    2015-01-01

    The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument - the fifth in a series of instruments developed for monitoring vertical distribution of aerosols, ozone, and other trace gases in the Earth's stratosphere and troposphere - is currently scheduled for delivery to the International Space Station (ISS) via the SpaceX Dragon vehicle in 2016. The Instrument Adapter Module (IAM), one of many SAGE III subsystems, continuously dissipates a considerable amount of thermal energy during mission operations. Although a portion of this energy is transferred via its large radiator surface area, the majority must be conductively transferred to the ExPRESS Payload Adapter (ExPA) to satisfy thermal mitigation requirements. The baseline IAM-ExPA mechanical interface did not afford the thermal conductance necessary to prevent the IAM from overheating in hot on-orbit cases, and high interfacial conductance was difficult to achieve given the large span between mechanical fasteners, less than stringent flatness specifications, and material usage constraints due to strict contamination requirements. This paper will examine the evolution of the IAM-ExPA thermal interface over the course of three design iterations and will include discussion on design challenges, material selection, testing successes and failures, and lessons learned.

  9. Moving from ethnography to epidemiology: lessons learned in Appalachia

    Science.gov (United States)

    Kuzara, Jennifer; Copeland, William E.; Costello, E. Jane; Angold, Adrian; Worthman, Carol M.

    2009-01-01

    Background Anthropologists are beginning to translate insights from ethnography into tools for population studies that assess the role of culture in human behavior, biology, and health. Aim We describe several lessons learned in the creation and administration of an ethnographically-based instrument to assess the life course perspectives of Appalachian youth, the Life Trajectory Interview for Youth (LTI-Y). Then, we explore the utility of the LTI-Y in predicting depressive affect, controlling for prior depressed mood and severe negative life events throughout the life course. Subjects and methods In a sample of 319 youth (190 White, 129 Cherokee), we tested the association between depressive affect and two domains of the LTI-Y - life course barriers and milestones. Longitudinal data on previous depressed mood and negative life events were included in the model. Results The ethnographically-based scales of life course barriers and milestones were associated with unique variance in depressed mood, together accounting for 11% of the variance in this outcome. Conclusion When creating ethnographically-based instruments, it is important to strike a balance between detailed, participant-driven procedures and the analytic needs of hypothesis testing. Ethnographically-based instruments have utility for predicting health outcomes in longitudinal studies. PMID:19353406

  10. Geocuration Lessons Learned from the Climate Data Initiative Project

    Science.gov (United States)

    Ramachandran, Rahul; Bugbee, Kaylin; Tilmes, Curt; Pinheiro Privette, Ana

    2015-01-01

    Curation is traditionally defined as the process of collecting and organizing information around a common subject matter or a topic of interest and typically occurs in museums, art galleries, and libraries. The task of organizing data around specific topics or themes is a vibrant and growing effort in the biological sciences but to date this effort has not been actively pursued in the Earth sciences. This presentation will introduce the concept of geocuration, which we define it as the act of searching, selecting, and synthesizing Earth science data/metadata and information from across disciplines and repositories into a single, cohesive, and useful compendium. We also present the Climate Data Initiative (CDI) project as an prototypical example. The CDI project is a systematic effort to manually curate and share openly available climate data from various federal agencies. CDI is a broad multi-agency effort of the U.S. government and seeks to leverage the extensive existing federal climate-relevant data to stimulate innovation and private-sector entrepreneurship to support national climate change preparedness. The geocuration process used in the CDI project, key lessons learned, and suggestions to improve similar geocuration efforts in the future will be part of this presentation.

  11. AECL's underground research laboratory: technical achievements and lessons learned

    International Nuclear Information System (INIS)

    Ohta, M.M.; Chandler, N.A.

    1997-03-01

    During the development of the research program for the Canadian Nuclear Fuel Waste Management Program in the 1970's, the need for an underground facility was recognized. AECL constructed an Underground Research Laboratory (URL) for large-scale testing and in situ engineering and performance-assessment-related experiments on key aspects of deep geological disposal in a representative geological environment. Ale URL is a unique geotechnical research and development facility because it was constructed in a previously undisturbed portion of a granitic pluton that was well characterized before construction began, and because most of the shaft and experimental areas are below the water table. The specific areas of research, development and demonstration include surface and underground characterization; groundwater and solute transport; in situ rock stress conditions; temperature and time-dependent deformation and failure characteristics of rock; excavation techniques to minimize damage to surrounding rock and to ensure safe working conditions; and the performance of seals and backfills. This report traces the evolution of the URL and summarizes the technical achievements and lessons learned during its siting, design and construction, and operating phases over the last 18 years. (author)

  12. Warfighter information services: lessons learned in the intelligence domain

    Science.gov (United States)

    Bray, S. E.

    2014-05-01

    A vision was presented in a previous paper of how a common set of services within a framework could be used to provide all the information processing needs of Warfighters. Central to that vision was the concept of a "Virtual Knowledge Base". The paper presents an implementation of these ideas in the intelligence domain. Several innovative technologies were employed in the solution, which are presented and their benefits explained. The project was successful, validating many of the design principles for such a system which had been proposed in earlier work. Many of these principles are discussed in detail, explaining lessons learned. The results showed that it is possible to make vast improvements in the ability to exploit available data, making it discoverable and queryable wherever it is from anywhere within a participating network; and to exploit machine reasoning to make faster and better inferences from available data, enabling human analysts to spend more of their time doing more difficult analytical tasks rather than searching for relevant data. It was also demonstrated that a small number of generic Information Processing services can be combined and configured in a variety of ways (without changing any software code) to create "fact-processing" workflows, in this case to create different intelligence analysis capabilities. It is yet to be demonstrated that the same generic services can be reused to create analytical/situational awareness capabilities for logistics, operations, planning or other military functions but this is considered likely.

  13. Anthropology and Epidemiology: learning epistemological lessons through a collaborative venture

    Science.gov (United States)

    Béhague, Dominique Pareja; Gonçalves, Helen; Victora, Cesar Gomes

    2009-01-01

    Collaboration between anthropology and epidemiology has a long and tumultuous history. Based on empirical examples, this paper describes a number of epistemological lessons we have learned through our experience of cross-disciplinary collaboration. Although critical of both mainstream epidemiology and medical anthropology, our analysis focuses on the implications of addressing each discipline’s main epistemological differences, while addressing the goal of adopting a broader social approach to health improvement. We believe it is important to push the boundaries of research collaborations from the more standard forms of “multidisciplinarity,” to the adoption of theoretically imbued “interdisciplinarity.” The more we challenge epistemological limitations and modify ways of knowing, the more we will be able to provide in-depth explanations for the emergence of disease-patterns and thus, to problem-solve. In our experience, both institutional support and the adoption of a relativistic attitude are necessary conditions for sustained theoretical interdisciplinarity. Until researchers acknowledge that methodology is merely a human-designed tool to interpret reality, unnecessary methodological hyper-specialization will continue to alienate one field of knowledge from the other. PMID:18833344

  14. Nuclear power plant Generic Aging Lessons Learned (GALL). Appendix B

    International Nuclear Information System (INIS)

    Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

    1996-12-01

    The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This report consists of Volume 2, which consists of the GALL literature review tables for the NUMARC Industry Reports reviewed for the report

  15. Lessons Learned from an International e-Training

    International Nuclear Information System (INIS)

    Han, K. W.; Hwang, I. A.; Min, B. J.; Lee, E. J.; Kwon, S. J.

    2008-01-01

    The Nuclear Training and Education Center (NTC) of KAERI is actively participating in the IAEA's Asian Network for Education in Nuclear Technology (ANENT), focusing on web-based nuclear education and training. The center has contributed, in particular, to the development of the ANENT web-portal including cyber platform, and making relevant courses available on it. As part of this effort, the first e-training was attempted with a course on energy planning jointly by NTC of KAERI, and Planning and Economic Studies Section (PESS) and Nuclear Knowledge Management Section (NKM) of IAEA. The objective of the e-training was: - to introduce the use of an IAEA model named as SIMPACTS (Simplified approach for estimating environmental impacts from electricity generation) for assessing environmental impacts from various electricity generations; - to identify real problems as they are and consider solutions for an effective implementation of e-training courses. SIMPACTS deals with sub-programs, i.e. AirPacts for a non-radiological air pollution, NukPacts for a radiological air pollution, HydroPacts for project impacts, and LiquidPacts for a radiological water pollution. This paper discusses lessons learned from the perspective of the e-training host and an ANENT member

  16. Sports genetics moving forward: lessons learned from medical research.

    Science.gov (United States)

    Mattsson, C Mikael; Wheeler, Matthew T; Waggott, Daryl; Caleshu, Colleen; Ashley, Euan A

    2016-03-01

    Sports genetics can take advantage of lessons learned from human disease genetics. By righting past mistakes and increasing scientific rigor, we can magnify the breadth and depth of knowledge in the field. We present an outline of challenges facing sports genetics in the light of experiences from medical research. Sports performance is complex, resulting from a combination of a wide variety of different traits and attributes. Improving sports genetics will foremost require analyses based on detailed phenotyping. To find widely valid, reproducible common variants associated with athletic phenotypes, study sample sizes must be dramatically increased. One paradox is that in order to confirm relevance, replications in specific populations must be undertaken. Family studies of athletes may facilitate the discovery of rare variants with large effects on athletic phenotypes. The complexity of the human genome, combined with the complexity of athletic phenotypes, will require additional metadata and biological validation to identify a comprehensive set of genes involved. Analysis of personal genetic and multiomic profiles contribute to our conceptualization of precision medicine; the same will be the case in precision sports science. In the refinement of sports genetics it is essential to evaluate similarities and differences between sexes and among ethnicities. Sports genetics to date have been hampered by small sample sizes and biased methodology, which can lead to erroneous associations and overestimation of effect sizes. Consequently, currently available genetic tests based on these inherently limited data cannot predict athletic performance with any accuracy. Copyright © 2016 the American Physiological Society.

  17. Lessons learned from TECNATOM's participation in the construction of NPP's

    International Nuclear Information System (INIS)

    Manrique, Alberto B.

    2010-01-01

    TECNATOM is a Spanish engineering company with more than 50 years of experience working for the nuclear industry across the world. TECNATOM has worked in over 30 countries in activities relating to the Operation and Maintenance of Nuclear Power Plants. The company started to work in the design of new Nuclear Power Plants in the early 90's and since then has continued to collaborate with different suppliers in the design and licensing of new reactors, especially in the areas of plant systems design, Man-Machine Interface design, the construction of Main Control Room simulators, training, the qualification of equipment and PSI/ISI engineering services. New man-machine interface designs and modifications are produced for both, new Nuclear Power Plants and existing facilities. For these new designs Human Factors Engineering must be applied, as in the case of any other traditional engineering discipline. The advantages of implementing adequate Human Factors Engineering techniques in the design of nuclear reactors have become not only a fact recognized by the majority of engineers and operators, but also an explicit requirement which is regulated and mandatory for the new designs. Additionally, the major savings achieved by a Nuclear Power Plant that has an operating methodology that significantly decreases the risk of operating errors makes their implementation necessary and almost vital. This paper describes the experience and lessons learned from TECNATOM's participation in the design of reactors belonging to Generations III, III+ and IV. (authors)

  18. NASA Composite Materials Development: Lessons Learned and Future Challenges

    Science.gov (United States)

    Tenney, Darrel R.; Davis, John G., Jr.; Pipes, R. Byron; Johnston, Norman

    2009-01-01

    Composite materials have emerged as the materials of choice for increasing the performance and reducing the weight and cost of military, general aviation, and transport aircraft and space launch vehicles. Major advancements have been made in the ability to design, fabricate, and analyze large complex aerospace structures. The recent efforts by Boeing and Airbus to incorporate composite into primary load carrying structures of large commercial transports and to certify the airworthiness of these structures is evidence of the significant advancements made in understanding and use of these materials in real world aircraft. NASA has been engaged in research on composites since the late 1960 s and has worked to address many development issues with these materials in an effort to ensure safety, improve performance, and improve affordability of air travel for the public good. This research has ranged from synthesis of advanced resin chemistries to development of mathematical analyses tools to reliably predict the response of built-up structures under combined load conditions. The lessons learned from this research are highlighted with specific examples to illustrate the problems encountered and solutions to these problems. Examples include specific technologies related to environmental effects, processing science, fabrication technologies, nondestructive inspection, damage tolerance, micromechanics, structural mechanics, and residual life prediction. The current state of the technology is reviewed and key issues requiring additional research identified. Also, grand challenges to be solved for expanded use of composites in aero structures are identified.

  19. Lessons learned from the quench-11 training exercise

    International Nuclear Information System (INIS)

    Hohorst, J.K.; Allison, C.M.

    2007-01-01

    16 organizations in 12 countries are participating in a RELAP/SCDAPSIM training exercise based on the Quench 11 experiment performed at Karlsruhe (Germany) in 2005. This exercise is being conducted in parallel to an International Standard Problem (ISP). Both the ISP and the RELAP/SCDAPSIM training exercise included a 'semi-blind' portion that was completed in the fall of 2006 and an 'open' portion that is to be completed in the summer of 2007. The RELAP/SCDAPSIM training exercise is coordinated by Innovative Systems Software with support by the International SCDAP Development and Training Program (SDTP). The Quench-11 experiment is based on an electrically heated fuel rod bundle representative of a PWR design. The bundle was subjected to a boil down transient, heat-up, and quenching with peak temperatures exceeding the melting point of the Zircaloy cladding. This experiment was chosen by the European Union as an International Benchmark exercise to compare the effectiveness of quenching models in the severe accident computer codes used today for accident analysis. This paper briefly describes (a) RELAP/SCDAPSIM/MOD3.4, (b) the Quench facility and experiments used in the training exercise, and (c) the training guidelines provided to the participants followed by a more detailed description of the lessons learned from the initial 'semi-blind' portion. The representative results demonstrate that good analysts can still have a difficult time predicting the thermal hydraulic response of a relative simple transient in a complex system

  20. Lessons learned with ISO 14001 at DOE sites

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, C. H., LLNL

    1998-03-01

    ISO 14001 is the international standard for environmental management systems (EMS). The standard applies the `plan, do, check, act` management system model to assure that the environmental impacts of operations are fully considered in planning and facility operations. ISO 14001 has grown in popularity in both the public and the private sector and has seen increasing utility within the U.S. Department of Energy (DOE). While there is no final DOE policy or requirement for ISO 14001 EMS implementation, ISO 14001 commands an active presence at many DOE sites. In general, the impetus for ISO 14001 in the DOE complex has been either an initiative by site management contractors to improve performance, or an actual requirement in the new management contracts for the sites. Several DOE sites now are committed to implement EMS`s in conformance with ISO 14001: Brookhaven National Laboratory (BNL), Hanford, Idaho National Engineering and Environmental Laboratory (INEEL), Kansas City Plant, Nevada Test Site, Savannah River Site (SRS), Waste Isolation Pilot Project (WIPP), West Valley. Several other DOE sites are expected to proceed in the near future with an EMS consistent with ISO 14001. However, not all sites are proceeding with an ISO 14001 EMS based on individual site business considerations. This paper describes the status of EMS implementation at these sites and identifies lessons learned that may be of use to other DOE sites.

  1. Space Mechanisms Lessons Learned and Accelerated Testing Studies

    Science.gov (United States)

    Fusaro, Robert L.

    1997-01-01

    A number of mechanism (mechanical moving component) failures and anomalies have recently occurred on satellites. In addition, more demanding operating and life requirements have caused mechanism failures or anomalies to occur even before some satellites were launched (e.g., during the qualification testing of GOES-NEXT, CERES, and the Space Station Freedom Beta Joint Gimbal). For these reasons, it is imperative to determine which mechanisms worked in the past and which have failed so that the best selection of mechanically moving components can be made for future satellites. It is also important to know where the problem areas are so that timely decisions can be made on the initiation of research to develop future needed technology. To chronicle the life and performance characteristics of mechanisms operating in a space environment, a Space Mechanisms Lessons Learned Study was conducted. The work was conducted by the NASA Lewis Research Center and by Mechanical Technologies Inc. (MTI) under contract NAS3-27086. The expectation of the study was to capture and retrieve information relating to the life and performance of mechanisms operating in the space environment to determine what components had operated successfully and what components had produced anomalies.

  2. Addressing data heterogeneity: Lessons learned from a multimedia risk assessment

    International Nuclear Information System (INIS)

    Oezkaynak, H.; Xue, Jianping; Butler, D.A.; Haroun, L.A.; MacDonell, M.M.; Fingleton, D.J.

    1991-01-01

    Cleanup activities are currently being conducted by the US Department of Energy (DOE) at a former chemical plant site that has been inactive for more than 20 years. The Army produced nitroaromatic explosives at the 220-acre site during the 1940s, and radioactive materials of the uranium and thorium series were processed there by DOE's predecessor agency during the 1950s and 1960s. Chemical and radioactive contaminants are present in soil, surface water, sediment, and groundwater at the site as a result of both past releases and disposal activities and subsequent contaminant migration. Samples have been collected from these media over a number of years under both DOE's environmental monitoring program and the site characterization program of the Superfund process. Results of samples analyses have been compiled in a computerized data base. These data are being evaluated in the context of potential exposure pathways that are currently present at the site or that may be present in the future, in order to estimate possible adverse impacts to human health and the environment in the absence of cleanup. This paper discusses the methodology used to address associated tasks and the lessons learned during the assessment process. Statistical issues and recommended future directions for dealing with technical aspects of this project and with similar multimedia risk assessment projects are addressed in the final discussion. 10 refs., 9 figs., 1 tab

  3. The verification of DRAGON: progress and lessons learned

    International Nuclear Information System (INIS)

    Marleau, G.

    2002-01-01

    The general requirements for the verification of the legacy code DRAGON are somewhat different from those used for new codes. For example, the absence of a design manual for DRAGON makes it difficult to confirm that the each part of the code performs as required since these requirements are not explicitly spelled out for most of the DRAGON modules. In fact, this conformance of the code can only be assessed, in most cases, by making sure that the contents of the DRAGON data structures, which correspond to the output generated by a module of the code, contains the adequate information. It is also possible in some cases to use the self-verification options in DRAGON to perform additional verification or to evaluate, using an independent software, the performance of specific functions in the code. Here, we will describe the global verification process that was considered in order to bring DRAGON to an industry standard tool-set (IST) status. We will also discuss some of the lessons we learned in performing this verification and present some of the modification to DRAGON that were implemented as a consequence of this verification. (author)

  4. Lessons learned from first generation nuclear plant probabalistic risk assessments

    International Nuclear Information System (INIS)

    Garrick, B.J.

    1984-01-01

    The paper by Garrick summarizes the state-of-the-art in what are perhaps the most archetypical probabilistic risk assessments (PRAs). Because of its unique regulatory environment and because of the high levels of perceived (not necessarily actual) risk, the nuclear industry more than any other has been concerned with quantitative risk analysis. Garrick's paper summarizes the lessons learned from ten PRA's conducted in the nuclear industry, including six that can be characterized as full-scope risk studies. Most of the quantitative data, though, came from two especially thorough studies done for the Zion and Indian Point power plants, operated by Commonwealth Edison and Consolidated Edison respectively. The principal conclusions of the Garrick survey are that the public risk (from radiation release) is now known to be very small for commercial nuclear power plants, but that the risk to utilities (from core damage) is somewhat larger. Significant radiation releases require both core meltdown -- an event occurring only about once every 10,000 reactor-years -- and containment failure, occurring only about once in every hundred meltdowns

  5. Lessons learned from fatique failures in major FWR components

    International Nuclear Information System (INIS)

    Ware, A.G.; Shah, V.N.

    1992-01-01

    This paper evaluates the field fatigue failure experience and describes the lessons learned that can be employed in managing fatigue damage at the sites of these failures and at other susceptible sites. Fatigue damage has resulted in cracks on the inside surfaces of vessels and piping, and in some cases, through-wall cracks resulting in coolant leakage. All of the fatigue failures resulted from conditions or stressors that were not accounted for in the original design analyses. In some cases, it has proven difficult to discover fatigue cracks using conventional inservice inspection methods; several cracks were detected because of leakage. Supplementary monitoring and inspection techniques such as fatigue monitoring, acoustic emission monitoring, and time-of-flight-diffraction ultrasonic testing can be used to assist in identifying susceptible sites, estimating crack growth, and sizing existing fatigue cracks. It is important to identify the root cause of failures because once the stressors and degradation mechanisms are known, changes in operating procedures and designs can be implemented to mitigate future fatigue damage

  6. MIDAS: Lessons learned from the first spaceborne atomic force microscope

    Science.gov (United States)

    Bentley, Mark Stephen; Arends, Herman; Butler, Bart; Gavira, Jose; Jeszenszky, Harald; Mannel, Thurid; Romstedt, Jens; Schmied, Roland; Torkar, Klaus

    2016-08-01

    The Micro-Imaging Dust Analysis System (MIDAS) atomic force microscope (AFM) onboard the Rosetta orbiter was the first such instrument launched into space in 2004. Designed only a few years after the technique was invented, MIDAS is currently orbiting comet 67P Churyumov-Gerasimenko and producing the highest resolution 3D images of cometary dust ever made in situ. After more than a year of continuous operation much experience has been gained with this novel instrument. Coupled with operations of the Flight Spare and advances in terrestrial AFM a set of "lessons learned" has been produced, cumulating in recommendations for future spaceborne atomic force microscopes. The majority of the design could be reused as-is, or with incremental upgrades to include more modern components (e.g. the processor). Key additional recommendations are to incorporate an optical microscope to aid the search for particles and image registration, to include a variety of cantilevers (with different spring constants) and a variety of tip geometries.

  7. Lessons Learned from Implementing National Nuclear Safety Knowledge Platforms

    International Nuclear Information System (INIS)

    Simo, A.

    2016-01-01

    The Integrated Nuclear Security Advisory Services (INSServ) took place in Cameroon from 21st to 25th April 2014 and the Integrated Regulatory Review Service (IRRS) from 12th to 21st October 2014. This was after the government requested the Director General of International Atomic Energy Agency (IAEA) through an official correspondence on 11th June 2013, for these missions. The main objective was to further improve the effectiveness of the Cameroon governmental, legal and regulatory framework for safety and security. Revision of the legal and regulatory framework so that all international safety and security standards are addressed in laws and statutes have been done with documents downloaded from Nuclear portal sites found in GNSSN. Establishment and implementation of integrated management systems by NRPA is being done with documentation under the National Nuclear Portal with lessons learned from the IAEA review missions. The regulatory documents have been uploaded on the platform and can be accessed through FNRBA and NRPA website (www.anrp.cm). UN organizations implementing projects in Cameroon are also linked to the platform. The action plans and progress reports for IAEA/AFRA projects are also available. Moreover, NRPA regulatory activities and licensing sources are available on this platform.

  8. Lessons learned in streamlining the preparation of SNM standard solutions

    International Nuclear Information System (INIS)

    Clark, J.P.; Johnson, S.R.

    1986-01-01

    Improved safeguard measurements have produced a demand for greater quantities of reliable SNM solution standards. At the Savannah River Plant (SRP), the demand for these standards has been met by several innovations to improve the productivity and reliability of standards preparations. With the use of computer controlled balance, large batches of SNM stock solutions are prepared on a gravimetric basis. Accurately dispensed quantities of the stock solution are weighed and stored in bottles. When needed, they are quantitatively transferred to tared containers, matrix adjusted to target concentrations, weighed, and measured for density at 25 0 C. Concentrations of SNM are calculated both gravimetrically and volumetrically. Calculated values are confirmed analytically before the standards are used in measurement control program (MCP) activities. The lessons learned include: MCP goals include error identification and management. Strategy modifications are required to improve error management. Administrative controls can minimize certain types of errors. Automation can eliminate redundancy and streamline preparations. Prudence and simplicity enhance automation success. The effort expended to increase productivity has increased the reliability of standards and provided better documentation for quality assurance

  9. Spill response exercises and lessons learned : a response organization's perspective

    International Nuclear Information System (INIS)

    Taylor, E.; Green, M.

    2001-01-01

    In the past five years, Burrard Clean Operations (BCO) has demonstrated its' oil spill response capabilities through different types of exercises. Such exercises are necessary for certification of Response Organizations in Canada. The exercises can be performed through actual response to spills or through simulated situations. Both can provide an opportunity to practice different levels of response to a range of conditions in various settings. They also provide the opportunity to focus on specific themes that can be part of a response and to identify areas for improvement in response actions. They also make it possible to interface with government agencies, industry and others that participate in spill responses. The exercise program for BCO is aimed at maintaining certification and to assist the Canadian Coast Guard. The exercises broaden the lessons learned and set a course for future enhancement to spill readiness should a real incident occur. The goals of the exercise program are to provide real time drills that show the operational capability of a representative sample of BCO equipment, management and trained spill responders. The response functions of the BCO exercise program are: notification, response organization activation, contractor activation, situation analysis, strategy development for marine oil spill response, site safety, equipment deployment, containment, recovery, shoreline assessment, cleanup, communications, decontamination, logistics, and financial management. The BCO experience has led to the basic conclusions that there is a need to vary the exercise design and format and that there is a need to implement follow-up actions provided during exercise evaluations. 7 refs., 3 tabs

  10. Lessons learned from HRA and human-system modeling efforts

    International Nuclear Information System (INIS)

    Hallbert, B.P.

    1993-01-01

    Human-System modeling is not unique to the field of Human Reliability Analysis (HRA). Since human factors professionals first began their explorations of human activities, they have done so with the concept of open-quotes systemclose quotes in mind. Though the two - human and system - are distinct, they can be properly understood only in terms of each other: the system provides a context in which goals and objectives for work are defined, and the human plays either a pre-defined or ad hoc role in meeting these goals. In this sense, every intervention which attempts to evaluate or improve upon some system parameter requires that an understanding of human-system interactions be developed. It is too often the case, however, that somewhere between the inception of a system and its implementation, the human-system relationships are overlooked, misunderstood, or inadequately framed. This results in mismatches between demands versus capabilities of human operators, systems which are difficult to operate, and the obvious end product-human error. The lessons learned from human system modeling provide a valuable feedback mechanism to the process of HRA, and the technologies which employ this form of modeling

  11. Radiological accident and incident in Thailand: Lesson to be learned

    International Nuclear Information System (INIS)

    Ya-anant, N.; Tiyapun, K.; Saiyut, K.

    2011-01-01

    Radioactive materials in Thailand have been used in medicine, research and industry for more than 50 y. Several radiological accident and incidents happened in the past 10 y. A serious one was the radiological accident that occurred in Samut Prakan (Thailand) in 2000. The serious radiological accident occurred when the 60 Co head was partially dismantled, taken from that storage to sell as scrap metal. Three victims died and 10 people received high dose from the source. The lesson learned from the radiological accident in Samut Prakan was to improve in many subjects, such as efficiency in Ministerial Regulations and Atomic Energy Act, emergency response and etc. In addition to the serious accident, there are also some small incidents that occurred, such as detection of contaminated scrap metals from the re-cycling of scrap metals from steel factories. Therefore, the radiation protection infrastructure was established after the accident. Laws and regulations of radiation safety and the relevant regulatory procedures must be revised. (authors)

  12. Lessons learned from the MIT Tara control and data system

    International Nuclear Information System (INIS)

    Gaudreau, M.P.J.; Sullivan, J.D.; Fredian, T.W.; Irby, J.H.; Karcher, C.A.; Rameriz, R.A.; Sevillano, E.; Stillerman, J.A.; Thomas, P.

    1987-10-01

    The control and data system of the MIT Tara Tandem Mirror has worked successfully throughout the lifetime of the experiment (1983 through 1987). As the Tara project winds down, it is appropriate to summarize the lessons learned from the implementation and operation of the control and data system over the years and in its final form. The control system handled ∼2400 I/0 points in real time throughout the 5 to 10 minute shot cycle while the data system, in near real time, handled ∼1000 signals with a total of 5 to 7 Mbytes of data each shot. The implementation depended upon a consistent approach based on separating physics and engineering functions and on detailed functional diagrams with narrowly defined cross communication. This paper is a comprehensive treatment of the principal successes, residual problems, and dilemmas that arose from the beginning until the final hardware and software implementation. Suggestions for future systems of either similar size or of larger scale such as CIT are made in the conclusion. 11 refs., 1 fig

  13. Lessons learned from DMAT medical activities in the great disaster

    International Nuclear Information System (INIS)

    Tanigawa, Koichi

    2012-01-01

    Lessons learned from actions taken by DMAT (Disaster Medical Assistant Team) at the Great East Japan Disaster (Mar. 11) are reported. One unit of DMAT consists from 2 doctors, 2 nurses and 1 logistics clerk, who all had education and training authorized by Japan MHLW. On the disaster, MHLW and suffering prefectures can order DMAT to gather at the disaster base hospital or SCU (Staging Care Unit) like an airport nearby. DMAT missions are firstly to grasp the medical state of the disaster and its report to the MHLW through EMIS (Emergency Medical Information System), and then to estimate the possible numbers of serious patients, their transporting systems and further DMAT needed. Within 3 days after the Disaster, 32 base hospitals in Iwate, Miyagi and Fukushima prefectures received 2,092 patients including 752 serious ones. Needs for DMAT were rather scarce within 48 hr after the Disaster and 103 DMAT in total within Mar. 14 in the 3 prefectures decreased to 50 of 840 patients in the area of 20 km distance from the Plant died during urgent evacuation without medicare staff due to deterioration of the basal disease, dehydration, hypothermia, etc., suggesting necessity of the more flexible action of DMAT, of which responsibility has been defined to be essentially within 48 hr after the disaster. Probably, DMAT should have assumption that complicated disaster with natural and atomic courses can occur at the earthquake in future. (T.T.)

  14. Technological learning through international collaboration: Lessons from the field

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2013-02-01

    Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.

  15. Project Interface Requirements Process Including Shuttle Lessons Learned

    Science.gov (United States)

    Bauch, Garland T.

    2010-01-01

    Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

  16. Lessons Learned from the Young Breast Cancer Survivorship Network.

    Science.gov (United States)

    Gisiger-Camata, Silvia; Nolan, Timiya S; Vo, Jacqueline B; Bail, Jennifer R; Lewis, Kayla A; Meneses, Karen

    2017-11-30

    The Young Breast Cancer Survivors Network (Network) is an academic and community-based partnership dedicated to education, support, and networking. The Network used a multi-pronged approach via monthly support and networking, annual education seminars, website networking, and individual survivor consultation. Formative and summative evaluations were conducted using group survey and individual survivor interviews for monthly gatherings, annual education meetings, and individual consultation. Google Analytics was applied to evaluate website use. The Network began with 4 initial partnerships and grew to 38 in the period from 2011 to 2017. During this 5-year period, 5 annual meetings (598 attendees), 23 support and networking meetings (373), and 115 individual survivor consultations were conducted. The Network website had nearly 12,000 individual users and more than 25,000 page views. Lessons learned include active community engagement, survivor empowerment, capacity building, social media outreach, and network sustainability. The 5-year experiences with the Network demonstrated that a regional program dedicated to the education, support, networking, and needs of young breast cancer survivors and their families can become a vital part of cancer survivorship services in a community. Strong community support, engagement, and encouragement were vital components to sustain the program.

  17. Geocuration Lessons Learned from the Climate Data Initiative Project

    Science.gov (United States)

    Ramachandran, R.; Bugbee, K.; Tilmes, C.; Privette, A. P.

    2015-12-01

    Curation is traditionally defined as the process of collecting and organizing information around a common subject matter or a topic of interest and typically occurs in museums, art galleries, and libraries. The task of organizing data around specific topics or themes is a vibrant and growing effort in the biological sciences but to date this effort has not been actively pursued in the Earth sciences. This presentation will introduce the concept of geocuration, which we define it as the act of searching, selecting, and synthesizing Earth science data/metadata and information from across disciplines and repositories into a single, cohesive, and useful compendium.We also present the Climate Data Initiative (CDI) project as an exemplar example. The CDI project is a systematic effort to manually curate and share openly available climate data from various federal agencies. CDI is a broad multi-agency effort of the U.S. government and seeks to leverage the extensive existing federal climate-relevant data to stimulate innovation and private-sector entrepreneurship to support national climate-change preparedness. The geocuration process used in CDI project, key lessons learned, and suggestions to improve similar geocuration efforts in the future will be part of this presentation.

  18. The iCub Software Architecture: evolution and lessons learned

    Directory of Open Access Journals (Sweden)

    Lorenzo eNatale

    2016-04-01

    Full Text Available The complexity of humanoid robots is increasing with the availability of new sensors, embedded CPUs and actuators. This wealth of technologies allows researchers to investigate new problems like whole-body force control, multi-modal human-robot interaction and sensory fusion. Under the hood of these robots, the software architecture has an important role: it allows researchers to get access to the robot functionalities focusing primarily on their research problems, it supports code reuse to minimize development and debugging, especially when new hardware becomes available. But more importantly it allows increasing the complexity of the experiments that can be implemented before system integration becomes unmanageable and debugging draws more resources than research itself.In this paper we illustrate the software architecture of the iCub humanoid robot and the software engineering best practices that have emerged driven by the needs of our research community. We describe the latest developments at the level of the middleware supporting interface definition and automatic code generation, logging, ROS compatibility and channel prioritization. We show the robot abstraction layer and how it has been modified to better address the requirements of the users and to support new hardware as it became available. We also describe the testing framework we have recently adopted for developing code using a test driven methodology. We conclude the paper discussing the lessons we have learned during the past eleven years of software development on the iCub humanoid robot.

  19. Lessons learned: Experiences with Integrated Safeguards in Norway

    International Nuclear Information System (INIS)

    Sekse, T.; Hornkjol, S.

    2010-01-01

    Integrated safeguards (IS) was implemented in Norway in 2002 as one of the first countries in the world. The implementation of IS has provided both advantages and disadvantages for Norway. Lessons learned will be discussed. The concept of unannounced inspections under the integrated safeguards regime compared to traditional safeguards is one of the major issues. Small users with depleted uranium as shielding containers and the effort used to safeguard them is an aspect of this issue. Recently there has been an interest from the IAEA to investigate the historical boundaries between a research reactor site and a neighboring defense research site. The paper will address this issue as a part of the implementation of IS. Lately, we have seen that several commercial parties have started research on nuclear fuel cycle related projects. This raises some questions concerning what to declare under Article 2 of the Additional Protocol (AP). Today anyone with a computer connected to the internet could carry out research amenable to declaration under the AP. This paper will discuss this issue. (author)

  20. Integrating gender into natural resources management projects: USAID lessons learned.

    Science.gov (United States)

    1998-01-01

    This article discusses USAID's lessons learned about integrating gender into natural resource management (NRM) projects in Peru, the Philippines, and Kenya. In Peru, USAID integrated women into a solid waste management project by lending money to invest in trash collection supplies. The loans allowed women to collect household waste, transfer it to a landfill, and provide additional sanitary disposal. The women were paid through direct fees from households and through service contracts with municipalities. In Mindanao, the Philippines, women were taught about the health impact of clean water and how to monitor water quality, including the monitoring of E. coli bacteria. Both men and women were taught soil conservation techniques for reducing the amount of silt running into the lake, which interferes with the generation of electricity and affects the health of everyone. The education helped women realize the importance of reducing silt and capitalized on their interest in protecting the health of their families. The women were thus willing to monitor the lake's water quality to determine if the conservation efforts were effective. In Kenya, USAID evaluated its Ecology, Community Organization, and Gender project in the Rift Valley, which helped resettle a landless community and helped with sustainable NRM. The evaluation revealed that women's relative bargaining power was less than men's. Organized capacity building that strengthened women's networks and improved their capacity to push issues onto the community agenda assured women a voice in setting the local NRM agenda.

  1. Lessons learned from two very different large radioactive spills

    International Nuclear Information System (INIS)

    Waggoner, J.K.

    1996-01-01

    Hard lessons in radioactive spill response, including decontamination and confinement methods, priority setting, survey techniques, and release limit determination were learned (by trial and error) from two spills which occurred recently at the Radiochemical Engineering and Development Center (REDC) at Oak Ridge National Laboratory. The responsibilities of radiological control personnel, decontamination workers, and facility management were often redefined as decontamination progressed. While each spill involved ∼1 Ci, their essential characteristics and isotopic distributions were quite different requiring innovative and pragmatic solutions. The first spill was liquid waste with water soluble fission products mixed in an organic solution of actinides. Rain, snowmelt, fog, and darkness foiled initial confinement efforts and contributed to the spread of contamination over several hundred square meters of concrete, asphalt, and floor covering. Contaminated runoff escaped into the environment until effective preventative measures were developed and put in place. The second spill happened when 224 Cm and 241 Am were accidentally siphoned from an in-cell product holding tank onto the floor of the Limited Access Area at the REDC. Several decontamination techniques were tried before an effective one was developed

  2. The Tokyo subway sarin attack-lessons learned

    International Nuclear Information System (INIS)

    Okumura, T.; Hisaoka, T.; Yamada, A.; Naito, T.; Isonuma, H.; Okumura, S.; Miura, K.; Sakurada, M.; Maekawa, H.; Ishimatsu, S.; Takasu, N.; Suzuki, K.

    2005-01-01

    The sarin gas attack in the Tokyo subway system is reviewed from a clinical toxicology perspective. Based on the lessons learned from this attack, the following areas should be addressed on a global scale. First, an adequate supply of protective equipment is required, including level B protective equipment with a pressure demand breathing apparatus. In addition, a system should be established that enables a possible cause to be determined based on symptoms, physical findings, general laboratory tests, and a simple qualitative analysis for poisonous substances. If an antidote is needed, the system should enable it to be administered to the victims as quickly as possible. Preparation for a large-scale chemical attack by terrorists requires the prior establishment of a detailed decontamination plan that utilizes not only mass decontamination facilities but also public facilities in the area. A system should be established for summarizing, evaluating, and disseminating information on poisonous substances. Finally, a large-scale scientific investigation of the Tokyo sarin attack should be conducted to examine its long-term and subclinical effects and the effects of exposure to asymptomatic low levels of sarin

  3. Public perception of radioactive waste management and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Curd, Peter James [UK Nirex Ltd., Harwell, Didcot (United Kingdom)

    1989-07-01

    This paper reviews the background to the current public awareness campaign on the management of radioactive wastes, which culminated in the publication by UK Nirex Limited of a Discussion Document 'The Way Forward'. The lessons learned from previous confrontations with communities and pressure groups are outlined together with the philosophy behind the Company's comprehensive discussion programme. An open policy of information distribution, while necessary was not enough. Therefore previous Nirex public information programmes had been less successful than hoped. Much has been learned from the problems encountered and this has been applied to develop a new programme. The importance of inviting people to take part in the decision process is manifest, and the discussion process was designed to encourage participation. It was an important step in overcoming the perception of secrecy which still surrounds the nuclear industry as a whole. It was unlikely that many communities would volunteer to take responsibility for the nations nuclear waste, although there are encouraging signs that some communities see the potential benefits outweigh perceived risks. However, by actively airing the matter in the general absence of local controversy a lot of accurate and hopefully persuasive information has been passed to many people and organisations in an atmosphere conducive to gaining their attention. If the Nirex discussion programme achieved nothing else there should be no local authority in the United Kingdom who does not know who we are, what we are doing and why. Having made a good start it is essential that an open debate continues and that local communities continue to share in the decision making process. There will be problems to overcome especially where unpopular recommendations have to be made but Nirex will continue to make every effort to win confidence and support by deeds as well as words.

  4. Public perception of radioactive waste management and lessons learned

    International Nuclear Information System (INIS)

    Curd, Peter James

    1989-01-01

    This paper reviews the background to the current public awareness campaign on the management of radioactive wastes, which culminated in the publication by UK Nirex Limited of a Discussion Document 'The Way Forward'. The lessons learned from previous confrontations with communities and pressure groups are outlined together with the philosophy behind the Company's comprehensive discussion programme. An open policy of information distribution, while necessary was not enough. Therefore previous Nirex public information programmes had been less successful than hoped. Much has been learned from the problems encountered and this has been applied to develop a new programme. The importance of inviting people to take part in the decision process is manifest, and the discussion process was designed to encourage participation. It was an important step in overcoming the perception of secrecy which still surrounds the nuclear industry as a whole. It was unlikely that many communities would volunteer to take responsibility for the nations nuclear waste, although there are encouraging signs that some communities see the potential benefits outweigh perceived risks. However, by actively airing the matter in the general absence of local controversy a lot of accurate and hopefully persuasive information has been passed to many people and organisations in an atmosphere conducive to gaining their attention. If the Nirex discussion programme achieved nothing else there should be no local authority in the United Kingdom who does not know who we are, what we are doing and why. Having made a good start it is essential that an open debate continues and that local communities continue to share in the decision making process. There will be problems to overcome especially where unpopular recommendations have to be made but Nirex will continue to make every effort to win confidence and support by deeds as well as words

  5. Laparoscopic common bile duct exploration. Lessons learned after 200 cases.

    Science.gov (United States)

    Abellán Morcillo, Israel; Qurashi, Kamran; Abrisqueta Carrión, Jesús; Martinez Isla, Alberto

    2014-05-01

    Laparoscopic common bile duct exploration (LCBDE) is a reliable, reproducible and cost-effective treatment for common bile duct stones. Several techniques have been described for choledochotomy closure. To present our experience and the lessons learned in more than 200 cases of LCBDE. Between January 1999 and July 2012, 206 patients with common bile duct stones underwent LCBDE. At the beginning of the series, we performed the closure of the CBD over a T-tube (36 patients), subsequently we favoured closure over an antegrade stent (133 patients) but due to a high incidence of acute pancreatitis in the last 16 patients we have performed primary closure. The 3 closure groups were matched for age and sex. Jaundice was the most frequent presentation. A total of 185 (88,5%) patients underwent choledochotomy whereas in 17 (8,7%) patients the transcystic route was used. The group that underwent choledochotomy had a larger size of stones compared to the transcystic group (9,7 vs 7,6mm). In the stented group we found an 11,6% incidence of pancreatitis and 26,1% of hyperamylasemia. In the primary closure group we found a clear improvement of complications and hospital stay. The increased experience of the surgeon and age (younger than 75) had a positive impact on mortality and morbidity. Primary closure of the common bile duct after LCBDE seems to be superior to closure over a T tube and stents. The learning curve seems to have a positive impact on the outcomes making it a safe and reproducible technique especially for patients aged under 75. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

  6. Best intentions: Lessons learned on international partnering and alliance contracts

    International Nuclear Information System (INIS)

    Farrell, S.; McDermott, J.R.; Ramsay, A.; Watzke, J.

    1996-01-01

    Although the energy industry is still in the early stages of partnering and alliancing, there is enough accumulated experience to be worth sharing information on what has worked and what has not. This paper explores the lessons learned in six agreements in the UK, the US, and the Middle East. It concludes that not all projects are potential candidates for partnering or alliances. Those likely to be successful will contain common characteristics of complexity, uncertainty, technology and duration. Management structure is moving towards integrated teams, although projects currently fall along a broad spectrum before becoming truly integrated. The risk/reward structure is becoming more complex over time, although it is unclear that tinkering with percentage sharing schemes will actually change the behavior of project participants and result in additional cost savings. The use of team building techniques and facilitators may well enhance the alliance implementation, but the choice of both company and individual members is fundamental to success. The overriding success factor, however, is the setting of fair and achievable targets. All of the managers surveyed stated that their projects benefited from the use of a partnering or alliance structure. Three of the projects were far enough along to cite significant cost savings. Although some in the industry are still doubtful that alliances can make a true difference to a project's outcome, those who have participated are convinced they have achieved results which would have been unattainable in a traditional structure. They would add, however, that partnering and alliancing is not easy, and not for all projects. The industry must share practical information if significant learning is to occur

  7. Importance Of Quality Control in Reducing System Risk, a Lesson Learned From The Shuttle and a Recommendation for Future Launch Vehicles

    Science.gov (United States)

    Safie, Fayssal M.; Messer, Bradley P.

    2006-01-01

    This paper presents lessons learned from the Space Shuttle return to flight experience and the importance of these lessons learned in the development of new the NASA Crew Launch Vehicle (CLV). Specifically, the paper discusses the relationship between process control and system risk, and the importance of process control in improving space vehicle flight safety. It uses the External Tank (ET) Thermal Protection System (TPS) experience and lessons learned from the redesign and process enhancement activities performed in preparation for Return to Flight after the Columbia accident. The paper also, discusses in some details, the Probabilistic engineering physics based risk assessment performed by the Shuttle program to evaluate the impact of TPS failure on system risk and the application of the methodology to the CLV.

  8. Perceived Advantages of 3D Lessons in Constructive Learning for South African Student Teachers Encountering Learning Barriers

    Science.gov (United States)

    de Jager, Thelma

    2017-01-01

    Research shows that three-dimensional (3D)-animated lessons can contribute to student teachers' effective learning and comprehension, regardless of the learning barriers they experience. Student teachers majoring in the subject Life Sciences in General Subject Didactics viewed 3D images of the heart during lectures. The 3D images employed in the…

  9. Providing Simulated Online and Mobile Learning Experiences in a Prison Education Setting: Lessons Learned from the PLEIADES Pilot Project

    Science.gov (United States)

    Farley, Helen; Murphy, Angela; Bedford, Tasman

    2014-01-01

    This article reports on the preliminary findings, design criteria and lessons learned while developing and piloting an alternative to traditional print-based education delivery within a prison environment. PLEIADES (Portable Learning Environments for Incarcerated Distance Education Students), was designed to provide incarcerated students with…

  10. Project-Based Learning Using Discussion and Lesson-Learned Methods via Social Media Model for Enhancing Problem Solving Skills

    Science.gov (United States)

    Jewpanich, Chaiwat; Piriyasurawong, Pallop

    2015-01-01

    This research aims to 1) develop the project-based learning using discussion and lesson-learned methods via social media model (PBL-DLL SoMe Model) used for enhancing problem solving skills of undergraduate in education student, and 2) evaluate the PBL-DLL SoMe Model used for enhancing problem solving skills of undergraduate in education student.…

  11. Gross Domestic Pizza. Active Learning Lessons. Economics International.

    Science.gov (United States)

    Zaleskiene, Irena; Venger, Anatoly; MacDonald, Rich; Davis, Debbie

    This lesson plan was developed through "Economics International," an international program to help build economic education infrastructures in the emerging market economies. It provides a lesson description; appropriate age level; economic concepts; content standards and benchmarks; related subject areas; instructional objectives; time…

  12. Lessons that Last: Former Youth Organizers' Reflections on What and How They Learned

    Science.gov (United States)

    Conner, Jerusha

    2014-01-01

    This study examines the learning outcomes and learning environment of a youth organizing program that has been effective in promoting individual as well as social change. Drawing on interviews with 25 former youth organizers from the program, this study explores the lessons that stay with them as they transition to young adulthood and the factors…

  13. Novice Teachers' Perspectives on Learning in Lesson Rehearsals in Second Language Teacher Preparation

    Science.gov (United States)

    Troyan, Francis John; Peercy, Megan Madigan

    2016-01-01

    Although scholars working in core practices have put forth lesson rehearsals as central to novice teachers' learning and development, there is little work on how novice teachers experience rehearsals. This qualitative research investigated learning opportunities for novice teachers of language learners during rehearsals. The analysis examines two…

  14. The Effects of Variations in Lesson Control and Practice on Learning from Interactive Video.

    Science.gov (United States)

    Hannafin, Michael J.; Colamaio, MaryAnne E.

    1987-01-01

    Discussion of the effects of variations in lesson control and practice on the learning of facts, procedures, and problem-solving skills during interactive video instruction focuses on a study of graduates and advanced level undergraduates learning cardiopulmonary resuscitation (CPR). Embedded questioning methods and posttests used are described.…

  15. Lessons Learned from Introducing Social Media Use in Undergraduate Economics Research

    Science.gov (United States)

    O'Brien, Martin; Freund, Katarina

    2018-01-01

    The research process and associated literacy requirements are often unfamiliar and daunting obstacles for undergraduate students. The use of social media has the potential to assist research training and encourage active learning, social inclusion and student engagement. This paper documents the lessons learned from developing a blended learning…

  16. BLENDED LEARNING: STUDENT PERCEPTION OF FACE-TO-FACE AND ONLINE EFL LESSONS

    Directory of Open Access Journals (Sweden)

    Brenda M. Wright

    2017-05-01

    Full Text Available With the ever-increasing development of technology, online teaching is more readily accepted as a viable component in teaching and learning, and blended learning, the combining of online and face-to-face learning, is becoming commonplace in many higher education institutions. Blended learning is, particularly in developing countries, in its early stages and not without its challenges. Asynchronous online lessons are currently still more prevalent in many areas of South-East Asia, perhaps due to potential difficulty in obtaining strong Internet connections, which may deter educators from synchronous options. Technological media have the potential to broaden the scope of resources available in teaching and to enhance the language learning experience. Although research to date shows some focus on blended learning, literature on distance online teaching seems more prevalent. This study exposed 112 Malaysian undergraduate EFL students' responses to an online lesson as part of an English grammar course, and investigates common student perceptions of the online lesson as compared with face-to-face lessons. Questionnaires using qualitative (Likert scale questions and quantitative (open-ended questions approaches provided data for content analysis to determine common student perceptions, with particular reference to motivation and interest. In general, more students associated in-class lessons with higher motivation and more interest, due to better understanding, valued classroom interaction with the lecturer and peers, and input from the lecturer. Students preferring the online lesson cited speed and convenience of study and flexibility of time and place of study as reasons for their choice. Skilful implementation of online lessons can enhance a language course but should not undermine the value of face-to-face instruction with EFL teachers.

  17. PREFACE Protein folding: lessons learned and new frontiers Protein folding: lessons learned and new frontiers

    Science.gov (United States)

    Pappu, Rohit V.; Nussinov, Ruth

    2009-03-01

    multi-scale dynamical problem when one considers the synergies between protein expression, spontaneous folding, chaperonin-assisted folding, protein targeting, the kinetics of post-translational modifications, protein degradation, and of course the drive to avoid aggregation. Further, there is growing recognition that cells not only tolerate but select for proteins that are intrinsically disordered. These proteins are essential for many crucial activities, and yet their inability to fold in isolation makes them prone to proteolytic processing and aggregation. In the series of papers that make up this special focus on protein folding in physical biology, leading researchers provide insights into diverse cross-sections of problems in protein folding. Barrick provides a concise review of what we have learned from the study of two-state folders and draws attention to how several unanswered questions are being approached using studies on large repeat proteins. Dissecting the contribution of hydration-mediated interactions to driving forces for protein folding and assembly has been extremely challenging. There is renewed interest in using hydrostatic pressure as a tool to access folding intermediates and decipher the role of partially hydrated states in folding, misfolding, and aggregation. Silva and Foguel review many of the nuances that have been uncovered by perturbing hydrostatic pressure as a thermodynamic parameter. As noted above, protein folding in vivo is expected to be considerably more complex than the folding of two-state proteins in dilute solutions. Lucent et al review the state-of-the-art in the development of quantitative theories to explain chaperonin-assisted folding in vivo. Additionally, they highlight unanswered questions pertaining to the processing of unfolded/misfolded proteins by the chaperone machinery. Zhuang et al present results that focus on the effects of surface tethering on transition state ensembles and folding mechanisms of a model two

  18. Supporting Shared Resource Usage for a Diverse User Community: the OSG Experience and Lessons Learned

    International Nuclear Information System (INIS)

    Garzoglio, Gabriele; Levshina, Tanya; Sehgal, Chander; Slyz, Marko; Rynge, Mats

    2012-01-01

    The Open Science Grid (OSG) supports a diverse community of new and existing users in adopting and making effective use of the Distributed High Throughput Computing (DHTC) model. The LHC user community has deep local support within the experiments. For other smaller communities and individual users the OSG provides consulting and technical services through the User Support area. We describe these sometimes successful and sometimes not so successful experiences and analyze lessons learned that are helping us improve our services. The services offered include forums to enable shared learning and mutual support, tutorials and documentation for new technology, and troubleshooting of problematic or systemic failure modes. For new communities and users, we bootstrap their use of the distributed high throughput computing technologies and resources available on the OSG by following a phased approach. We first adapt the application and run a small production campaign on a subset of “friendly” sites. Only then do we move the user to run full production campaigns across the many remote sites on the OSG, adding to the community resources up to hundreds of thousands of CPU hours per day. This scaling up generates new challenges – like no determinism in the time to job completion, and diverse errors due to the heterogeneity of the configurations and environments – so some attention is needed to get good results. We cover recent experiences with image simulation for the Large Synoptic Survey Telescope (LSST), small-file large volume data movement for the Dark Energy Survey (DES), civil engineering simulation with the Network for Earthquake Engineering Simulation (NEES), and accelerator modeling with the Electron Ion Collider group at BNL. We will categorize and analyze the use cases and describe how our processes are evolving based on lessons learned.

  19. Lessons Learned for Cx PRACA. Constellation Program Problem Reporting, Analysis and Corrective Action Process and System

    Science.gov (United States)

    Kelle, Pido I.; Ratterman, Christian; Gibbs, Cecil

    2009-01-01

    This slide presentation reviews the Constellation Program Problem Reporting, Analysis and Corrective Action Process and System (Cx PRACA). The goal of the Cx PRACA is to incorporate Lessons learned from the Shuttle, ISS, and Orbiter programs by creating a single tool for managing the PRACA process, that clearly defines the scope of PRACA applicability and what must be reported, and defines the ownership and responsibility for managing the PRACA process including disposition approval authority. CxP PRACA is a process, supported by a single information gathering data module which will be integrated with a single CxP Information System, providing interoperability, import and export capability making the CxP PRACA a more effective and user friendly technical and management tool.

  20. Through Their Eyes: Lessons Learned Using Participatory Methods in Health Care Quality Improvement Projects.

    Science.gov (United States)

    Balbale, Salva N; Locatelli, Sara M; LaVela, Sherri L

    2016-08-01

    In this methodological article, we examine participatory methods in depth to demonstrate how these methods can be adopted for quality improvement (QI) projects in health care. We draw on existing literature and our QI initiatives in the Department of Veterans Affairs to discuss the application of photovoice and guided tours in QI efforts. We highlight lessons learned and several benefits of using participatory methods in this area. Using participatory methods, evaluators can engage patients, providers, and other stakeholders as partners to enhance care. Participant involvement helps yield actionable data that can be translated into improved care practices. Use of these methods also helps generate key insights to inform improvements that truly resonate with stakeholders. Using participatory methods is a valuable strategy to harness participant engagement and drive improvements that address individual needs. In applying these innovative methodologies, evaluators can transcend traditional approaches to uniquely support evaluations and improvements in health care. © The Author(s) 2015.

  1. Going open source: some lessons learned from the development of OpenRecLink

    Directory of Open Access Journals (Sweden)

    Kenneth Rochel de Camargo Jr.

    2015-02-01

    Full Text Available Record linkage is the process of identifying and merging records across different databases belonging to the same entity. The health sector is one of the pioneering areas of record linkage techniques applications. In 1998 we began the development of a software package, called RecLink that implemented probabilistic record linkage techniques. In this article we report the development of a new, open-source version of that program, now named OpenRecLink. The aim of this article is to present the main characteristics of the new version and some of the lessons learned during its development. The new version is a total rewrite of the program, based on three goals: (1 to migrate to a free and open source software (FOSS platform; (2 to implement a multiplatform version; (3 to implement the support for internationalization. We describe the tools that we adopted, the process of development and some of the problems encountered.

  2. Service Oriented Robotic Architecture for Space Robotics: Design, Testing, and Lessons Learned

    Science.gov (United States)

    Fluckiger, Lorenzo Jean Marc E; Utz, Hans Heinrich

    2013-01-01

    This paper presents the lessons learned from six years of experiments with planetary rover prototypes running the Service Oriented Robotic Architecture (SORA) developed by the Intelligent Robotics Group (IRG) at the NASA Ames Research Center. SORA relies on proven software engineering methods and technologies applied to space robotics. Based on a Service Oriented Architecture and robust middleware, SORA encompasses on-board robot control and a full suite of software tools necessary for remotely operated exploration missions. SORA has been eld tested in numerous scenarios of robotic lunar and planetary exploration. The experiments conducted by IRG with SORA exercise a large set of the constraints encountered in space applications: remote robotic assets, ight relevant science instruments, distributed operations, high network latencies and unreliable or intermittent communication links. In this paper, we present the results of these eld tests in regard to the developed architecture, and discuss its bene ts and limitations.

  3. Reliability Lessons Learned From GPU Experience With The Titan Supercomputer at Oak Ridge Leadership Computing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Gallarno, George [Christian Brothers University; Rogers, James H [ORNL; Maxwell, Don E [ORNL

    2015-01-01

    The high computational capability of graphics processing units (GPUs) is enabling and driving the scientific discovery process at large-scale. The world s second fastest supercomputer for open science, Titan, has more than 18,000 GPUs that computational scientists use to perform scientific simu- lations and data analysis. Understanding of GPU reliability characteristics, however, is still in its nascent stage since GPUs have only recently been deployed at large-scale. This paper presents a detailed study of GPU errors and their impact on system operations and applications, describing experiences with the 18,688 GPUs on the Titan supercom- puter as well as lessons learned in the process of efficient operation of GPUs at scale. These experiences are helpful to HPC sites which already have large-scale GPU clusters or plan to deploy GPUs in the future.

  4. Lessons learned after three years of legalized, recreational marijuana: The Colorado experience.

    Science.gov (United States)

    Ghosh, Tista S; Vigil, Daniel I; Maffey, Ali; Tolliver, Rickey; Van Dyke, Mike; Kattari, Leonardo; Krug, Heather; Reed, Jack K; Wolk, Larry

    2017-11-01

    In November 2012 Colorado voters approved legalized recreational marijuana. On January 1, 2014 Colorado became the first state to allow legal sales of non-medical marijuana for adults over the age of 21. Since that time, the state has been monitoring potential impacts on population health. In this paper we present lessons learned in the first three years following legal sales of recreational marijuana. These lessons pertain to health behaviors and health outcomes, as well as to health policy issues. Our intent is to share these lessons with other states as they face the prospect of recreational marijuana legalization. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. A Harvest of Practical Insights : Lessons Learned in Agriculture, Agribusiness, Sustainable Rural Development, and Climate Change

    OpenAIRE

    International Finance Corporation

    2012-01-01

    This IFC SmartBook is a compilation of sixteen IFC SmartLessons that presents practical lessons learned by staff from across the IFC and the World Bank on approaches for engaging in agriculture that have led to success. Agribusiness is a crucial economic sector, for food security of course, for managing water stress and ecosystem services, but also as a source of employment in emerging mar...

  6. Kinesthetic Astronomy: Significant Upgrades to the Sky Time Lesson that Support Student Learning

    Science.gov (United States)

    Morrow, C. A.; Zawaski, M.

    2004-12-01

    This paper will report on a significant upgrade to the first in a series of innovative, experiential lessons we call Kinesthetic Astronomy. The Sky Time lesson reconnects students with the astronomical meaning of the day, year, and seasons. Like all Kinesthetic Astronomy lessons, it teaches basic astronomical concepts through choreographed bodily movements and positions that provide educational sensory experiences. They are intended for sixth graders up through adult learners in both formal and informal educational settings. They emphasize astronomical concepts and phenomenon that people can readily encounter in their "everyday" lives such as time, seasons, and sky motions of the Sun, Moon, stars, and planets. Kinesthetic Astronomy lesson plans are fully aligned with national science education standards, both in content and instructional practice. Our lessons offer a complete learning cycle with written assessment opportunities now embedded throughout the lesson. We have substantially strengthened the written assessment options for the Sky Time lesson to help students translate their kinesthetic and visual learning into the verbal-linguistic and mathematical-logical realms of expression. Field testing with non-science undergraduates, middle school science teachers and students, Junior Girl Scouts, museum education staff, and outdoor educators has been providing evidence that Kinesthetic Astronomy techniques allow learners to achieve a good grasp of concepts that are much more difficult to learn in more conventional ways such as via textbooks or even computer animation. Field testing of the Sky Time lesson has also led us to significant changes from the previous version to support student learning. We will report on the nature of these changes.

  7. Lessons learned and advice from Vietnam war nurses: a qualitative study.

    Science.gov (United States)

    Scannell-Desch, Elizabeth A

    2005-03-01

    The aim of this paper is to describe guidance for nurses today from the lessons learned by nurses who served in the Vietnam War. There is little research focusing on nurses' experiences in the Vietnam War. Lessons learned and subsequent advice from nurses who served in Vietnam may be helpful to those serving in current and future wars. A Husserlian phenomenological approach was taken, using interviews with a purposive sample of Registered Nurses who were female, and had served in the United States of America armed forces in Vietnam during the war. Seven theme clusters described the lesson learned and guidance offered by the Vietnam War nurses: advice about journaling, training, caring for yourself, use of support systems, talking about your experiences, understanding the mission, and lack of preparation for war. Much can be learned from the lessons learned and advice given by Vietnam War nurses. These lessons stress that nurses need to take a pro-active role in preparing themselves for deployment to a war zone, and that institutional training for war needs to be intensive and realistic. The environmental, cultural, technological, clinical and psychosocial demands of war nursing need to be comprehensively addressed before nurses deploy to a war.

  8. Lessons Learned from the First Decade of Adaptive Management in Comprehensive Everglades Restoration

    Directory of Open Access Journals (Sweden)

    Andrew J. LoSchiavo

    2013-12-01

    Full Text Available Although few successful examples of large-scale adaptive management applications are available to ecosystem restoration scientists and managers, examining where and how the components of an adaptive management program have been successfully implemented yields insight into what approaches have and have not worked. We document five key lessons learned during the decade-long development and implementation of the Comprehensive Everglades Restoration Plan (CERP Collaborative Adaptive Management Program that might be useful to other adaptive management practitioners. First, legislative and regulatory authorities that require the development of an adaptive management program are necessary to maintain funding and support to set up and implement adaptive management. Second, integration of adaptive management activities into existing institutional processes, and development of technical guidance, helps to ensure that adaptive management activities are understood and roles and responsibilities are clearly articulated so that adaptive management activities are implemented successfully. Third, a strong applied science framework is critical for establishing a prerestoration ecosystem reference condition and understanding of how the system works, as well as for providing a conduit for incorporating new scientific information into the decision-making process. Fourth, clear identification of uncertainties that pose risks to meeting restoration goals helps with the development of hypothesis-driven strategies to inform restoration planning and implementation. Tools such as management options matrices can provide a coherent way to link hypotheses to specific monitoring efforts and options to adjust implementation if performance goals are not achieved. Fifth, independent external peer review of an adaptive management program provides important feedback critical to maintaining and improving adaptive management implementation for ecosystem restoration. These lessons

  9. International R&M/Safety Cooperation Lessons Learned Between NASA and JAXA

    Science.gov (United States)

    Fernandez, Rene; Havenhill, Maria T.; Zampino, Edward J.; Kiefer, Dwayne E.

    2013-01-01

    Presented are a number of important experiences gained and lessons learned from the collaboration of the National Aeronautics and Space Administration (NASA) and the Japanese Aerospace Exploration Agency (JAXA) on the CoNNeCT (Communications, Navigation, and Networking re-Configurable Testbed) project. Both space agencies worked on the CoNNeCT Project to design, assemble, test, integrate, and launch a communications testbed facility mounted onto the International Space Station (ISS) truss. At the 2012 RAMS, two papers about CoNNeCT were presented: one on Ground Support Equipment Reliability & System Safety, and the other one on combined application of System Safety & Reliability for the flight system. In addition to the logistics challenges present when two organizations are on the opposite side of the world, there is also a language barrier. The language barrier encompasses not only the different alphabet, it encompasses the social interactions; these were addressed by techniques presented in the paper. The differences in interpretation and application of Spaceflight Requirements will be discussed in this paper. Although many, but definitely not all, of JAXA's Spaceflight Requirements were inspired by NASA, there were significant and critically important differences in how they were interpreted and applied. This paper intends to summarize which practices worked and which did not for an international collaborative effort so that future missions may benefit from our experiences. The CoNNeCT flight system has been successfully assembled, integrated, tested, shipped, launched and installed on the ISS without incident. This demonstrates that the steps taken to facilitate international understanding, communication, and coordination were successful and warrant discussion as lessons learned.

  10. Lessons learned in planning the Canadian Nuclear Legacy Liabilities Program

    International Nuclear Information System (INIS)

    Stephens, Michael E.; Brooks, Sheila M.; Miller, Joan M.; Mason, Robert A.

    2011-01-01

    In 2006, Atomic Energy of Canada Limited (AECL) and Natural Resources Canada (NRCan) began implementing a $7B CDN, 70-year Nuclear Legacy Liabilities Program (NLLP) to deal with legacy decommissioning and environmental issues at AECL nuclear sites. The objective of the NLLP is to safely and cost-effectively reduce the nuclear legacy liabilities and associated risks based on sound waste management and environmental principles in the best interest of Canadians. The liabilities include shutdown research and prototype power reactors, fuel handling facilities, radiochemical laboratories, support buildings, radioactive waste storage facilities, and contaminated lands at several sites located across eastern Canada from Quebec to Manitoba. The largest site, Chalk River Laboratories (CRL) in Ontario, will continue as an operational nuclear site for the foreseeable future. Planning and delivery of the Program is managed by the Liability Management Unit (LMU), a group that was formed within AECL for the purpose. The composition and progress of the NLLP has been reported in recent conferences. The NLLP comprises a number of interlinked decommissioning, waste management and environmental restoration activities that are being executed at different sites, and by various technical groups as suppliers to the LMU. Many lessons about planning and executing such a large, diverse Program have been learned in planning the initial five-year 'start-up' phase (which will conclude 2011 March), in planning the five-year second phase (which is currently being finalized), and in planning individual and interacting activities within the Program. The activities to be undertaken in the start-up phase were planned by a small group of AECL technical experts using the currently available information on the liabilities. Progress in executing the Program was slower than anticipated due to less than ideal alignment between some planned technical solutions and the actual requirements, as well as the

  11. Data quality objectives lessons learned for tank waste characterization

    International Nuclear Information System (INIS)

    Eberlein, S.J.; Banning, D.L.

    1996-01-01

    The tank waste characterization process is an integral part of the overall effort to control the hazards associated with radioactive wastes stored in underground tanks at the Hanford Reservation. The programs involved in the characterization of the waste are employing the Data Quality Objective (DQO) process in all information and data collection activities. The DQO process is used by the programs to address an issue or problem rather than a specific sampling event. Practical limits (e.g., limited number and location of sampling points) do not always allow for precise characterization of a tank or the full implementation of the DQO process. Because of the flexibility of the DQO process, it can be used as a planning tool for sampling and analysis of the underground waste storage tanks. The iterative nature of the DQO process allows it to be used as additional information is obtained or open-quotes lessons are learnedclose quotes concerning an issue or problem requiring sampling and analysis of tank waste. In addition, the application of the DQO process forces alternative actions to be considered when precise characterization of a tank or the fall implementation of the DQO process is not practical

  12. KINAC/INSA International Training Activities and Lessons Learned

    International Nuclear Information System (INIS)

    Kim, Hyun Chul

    2016-01-01

    In an effort to strengthen the coordination of the nuclear security training and support centers, the International Atomic Energy Agency (IAEA) established the International Network for Nuclear Security Training and Support Centres (NSSC Network) in February 2012. In February 2013, NSSC Network members from China, Japan and the Republic of Korea (ROK) established the 'Asia Regional Network' under the auspices of the NSSC Network to enhance regional collaboration to harmonize activities of the regional CoEs to provide effective support on nuclear security. Japan opened its CoE, Integrated Support Center for Nuclear Nonproliferation and Nuclear Security (ISCN) in February 2011. The Chinese CoE, so called State Nuclear Security Technology Center (SNSTC), is expected to open in March 2016. As one of ROK's national commitments at the 2010 NSS, the KINAC/INSA was established in 2014 in order to share ROK's expertise and support the Summit's mission. International training activities of the KINAC/INSA for two years have been introduced and the lessons learned from those activities have been identified. While the KINAC/INSA as the ROK's CoE has begun on the right foot, it still remains challenging to achieve real excellence in training. Such international training efforts of the KINAC/INSA will eventually contribute to the ROK acknowledged as a global leader in the area of nuclear nonproliferation and security and a nuclear supplier fulfilling responsibility on global nuclear nonproliferation and security regime

  13. Lessons learned and implications of the Fukushima NPP accidents

    Energy Technology Data Exchange (ETDEWEB)

    Tokuhiro, A., E-mail: tokuhio@uidaho.edu [Univ. of Idaho, Idaho Falls, ID (United States)

    2014-07-01

    The global nuclear 'enterprise' is now 3-1/2 years (March 11, 2011) beyond the historic Tohoku earthquake (M9.0), subsequent tsunami (~14-15m waves), and unfortunately, the continuing consequences of the 'Fukushima nuclear power plant (NPP) accident. We now live in the post-Fukushima nuclear era. First let us pay our respects to this tragic loss-of-life (~16,000 fatalities) as a result of the earthquake and tsunami; also 10-years earlier in 2004, centered further south in the Indian Ocean (230,000+ fatalities). The movie, 'The Impossible', was a reminder that indeed, energy provides sustenance and socio-economic development for humankind. Energy will determine the state of AsiaPacific (AP) in years to come. Over the past 15-years, AP has clearly had increasing means to lead global economic growth, relative to stagnating economies of scale in Europe and U.S. AP also has both existing and emerging larger-scale industrial ambitions and capital to construct new nuclear power plants (NPPs). China has some 25-28 units under construction at 11 sites; the near-term goal is to establish 40GW of generating capacity by 2020 and to reach some 70-75GW approximately 10 years later. Although some investments are also being made in renewable energy, the demand for capacity clearly dictates further growth in nuclear power. However, unless high expectations for safety, safety culture are concurrently encouraged, we may face the next nuclear accident again in Asia. This work looks at the technical and non-technical lessons learned from the Fukushima Daiichi accident and the implications that we cannot afford to ignore. (author)

  14. TANK WASTE RETRIEVAL LESSONS LEARNED AT THE HANFORD SITE

    International Nuclear Information System (INIS)

    DODD, R.A.

    2006-01-01

    One of the environmental remediation challenges facing the nation is the retrieval and permanent disposal of approximately 90 million gallons of radioactive waste stored in underground tanks at the US Department of Energy (DOE) facilities. The Hanford Site is located in southeastern Washington State and stores roughly 60% of this waste. An estimated 53 million gallons of high-level, transuranic, and low-level radioactive waste is stored underground in 149 single-shell tanks (SSTs) and 28 newer double-shell tanks (DSTs) at the Hanford Site. These SSTs range in size from 55,000 gallons to 1,000,000 gallon capacity. Approximately 30 million gallons of this waste is stored in SSTs. The SSTs were constructed between 1943 and 1964 and all have exceeded the nominal 20-year design life. Sixty-seven SSTs are known or suspected to have leaked an estimated 1,000,000 gallons of waste. The risk of additional SST leakage has been greatly reduced by removing more than 3 million gallons of interstitial liquids and supernatant and transferring the waste to the DST system since 1997 as part of the interim stabilization program. Retrieval of SST saltcake and sludge waste is underway to further reduce risks and stage feed materials for the Hanford Site Waste Treatment Plant. This paper presents lessons learned from retrieval of tank waste at the Hanford Site and discusses how this information is used to optimize retrieval system efficiency, improve overall cost effectiveness of retrieval operations, and ensure that HFFACO requirements are met

  15. Implementing a regional oncology information system: approach and lessons learned.

    Science.gov (United States)

    Evans, W K; Ashbury, F D; Hogue, G L; Smith, A; Pun, J

    2014-10-01

    Paper-based medical record systems are known to have major problems of inaccuracy, incomplete data, poor accessibility, and challenges to patient confidentiality. They are also an inefficient mechanism of record-sharing for interdisciplinary patient assessment and management, and represent a major problem for keeping current and monitoring quality control to facilitate improvement. To address those concerns, national, regional, and local health care authorities have increased the pressure on oncology practices to upgrade from paper-based systems to electronic health records. Here, we describe and discuss the challenges to implementing a region-wide oncology information system across four independent health care organizations, and we describe the lessons learned from the initial phases that are now being applied in subsequent activities of this complex project. The need for change must be shared across centres to increase buy-in, adoption, and implementation. It is essential to establish physician leadership, commitment, and engagement in the process. Work processes had to be revised to optimize use of the new system. Culture change must be included in the change management strategy. Furthermore, training and resource requirements must be thoroughly planned, implemented, monitored, and modified as required for effective adoption of new work processes and technology. Interfaces must be established with multiple existing electronic systems across the region to ensure appropriate patient flow. Periodic assessment of the existing project structure is necessary, and adjustments are often required to ensure that the project meets its objectives. The implementation of region-wide oncology information systems across different health practice locations has many challenges. Leadership is essential. A strong, collaborative information-sharing strategy across the region and with the supplier is essential to identify, discuss, and resolve implementation problems. A structure

  16. Lessons learned and implications of the Fukushima NPP accidents

    International Nuclear Information System (INIS)

    Tokuhiro, A.

    2014-01-01

    The global nuclear 'enterprise' is now 3-1/2 years (March 11, 2011) beyond the historic Tohoku earthquake (M9.0), subsequent tsunami (~14-15m waves), and unfortunately, the continuing consequences of the 'Fukushima nuclear power plant (NPP) accident. We now live in the post-Fukushima nuclear era. First let us pay our respects to this tragic loss-of-life (~16,000 fatalities) as a result of the earthquake and tsunami; also 10-years earlier in 2004, centered further south in the Indian Ocean (230,000+ fatalities). The movie, 'The Impossible', was a reminder that indeed, energy provides sustenance and socio-economic development for humankind. Energy will determine the state of AsiaPacific (AP) in years to come. Over the past 15-years, AP has clearly had increasing means to lead global economic growth, relative to stagnating economies of scale in Europe and U.S. AP also has both existing and emerging larger-scale industrial ambitions and capital to construct new nuclear power plants (NPPs). China has some 25-28 units under construction at 11 sites; the near-term goal is to establish 40GW of generating capacity by 2020 and to reach some 70-75GW approximately 10 years later. Although some investments are also being made in renewable energy, the demand for capacity clearly dictates further growth in nuclear power. However, unless high expectations for safety, safety culture are concurrently encouraged, we may face the next nuclear accident again in Asia. This work looks at the technical and non-technical lessons learned from the Fukushima Daiichi accident and the implications that we cannot afford to ignore. (author)

  17. KINAC/INSA International Training Activities and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2016-05-15

    In an effort to strengthen the coordination of the nuclear security training and support centers, the International Atomic Energy Agency (IAEA) established the International Network for Nuclear Security Training and Support Centres (NSSC Network) in February 2012. In February 2013, NSSC Network members from China, Japan and the Republic of Korea (ROK) established the 'Asia Regional Network' under the auspices of the NSSC Network to enhance regional collaboration to harmonize activities of the regional CoEs to provide effective support on nuclear security. Japan opened its CoE, Integrated Support Center for Nuclear Nonproliferation and Nuclear Security (ISCN) in February 2011. The Chinese CoE, so called State Nuclear Security Technology Center (SNSTC), is expected to open in March 2016. As one of ROK's national commitments at the 2010 NSS, the KINAC/INSA was established in 2014 in order to share ROK's expertise and support the Summit's mission. International training activities of the KINAC/INSA for two years have been introduced and the lessons learned from those activities have been identified. While the KINAC/INSA as the ROK's CoE has begun on the right foot, it still remains challenging to achieve real excellence in training. Such international training efforts of the KINAC/INSA will eventually contribute to the ROK acknowledged as a global leader in the area of nuclear nonproliferation and security and a nuclear supplier fulfilling responsibility on global nuclear nonproliferation and security regime.

  18. Globalizing Lessons Learned from Regional-scale Observatories

    Science.gov (United States)

    Glenn, S. M.

    2016-02-01

    The Mid Atlantic Regional Association Coastal Ocean Observing System (MARACOOS) has accumulated a decade of experience designing, building and operating a Regional Coastal Ocean Observing System for the U.S. Integrated Ocean Observing System (IOOS). MARACOOS serves societal goals and supports scientific discovery at the scale of a Large Marine Ecosystem (LME). Societal themes include maritime safety, ecosystem decision support, coastal inundation, water quality and offshore energy. Scientific results that feed back on societal goals with better products include improved understanding of seasonal transport pathways and their impact on phytoplankton blooms and hypoxia, seasonal evolution of the subsurface Mid Atlantic Cold Pool and its impact on fisheries, biogeochemical transformations in coastal plumes, coastal ocean evolution and impact on hurricane intensities, and storm sediment transport pathways. As the global ocean observing requirements grow to support additional societal needs for information on fisheries and aquaculture, ocean acidification and deoxygenation, water quality and offshore development, global observing will necessarily evolve to include more coastal observations and forecast models at the scale of the world's many LMEs. Here we describe our efforts to share lessons learned between the observatory operators at the regional-scale of the LMEs. Current collaborators are spread across Europe, and also include Korea, Indonesia, Australia, Brazil and South Africa. Specific examples include the development of a world standard QA/QC approach for HF Radar data that will foster the sharing of data between countries, basin-scale underwater glider missions between internationally-distributed glider ports to developed a shared understanding of operations and an ongoing evaluation of the global ocean models in which the regional models for the LME will be nested, and joint training programs to develop the distributed teams of scientists and technicians

  19. Lessons learned from installation of an environmental horizontal well

    International Nuclear Information System (INIS)

    Oakley, D.B.; Nickelson, M.D.

    1994-01-01

    At Williams Air Force Base near Phoenix, Arizona, a Pilot Study/Demonstration Study is being performed to evaluate the effectiveness of horizontal vs vertical wells in remediating and containing a jet fuel contaminant plume. An early stage of this project included successful installation of the world's longest, deepest environmental horizontal well. The horizontal well was installed using river crossing technology developed for drilling boreholes and installing utility conduits under rivers. Boreholes more than 5,000 ft. long have been successfully installed using river crossing technology. However, these boreholes are typically shallower than 100 ft. below land surface. Installation of the environment horizontal well proved to be extremely challenging because of the depth, the length of the borehole, and the requirements dictated by well installation criteria. Two installation attempts failed before the successful installation. The first installation attempt failed during well material installation. The second attempt resulted in the drill string becoming permanently stuck and abandoned downhole. The history of the two failed and one successful installation attempts demonstrates several lessons learned, including (1) streamline the well materials installation process as much as possible; (2) guar-gum-based drilling muds do not have the gel strength to remove sufficient cuttings from deep boreholes; (3) if sandpack around the well screen is required, a prepack screen should be installed--avoid using tremie pipes for installing a sandpack; (4) drill string location information provided by surface magnetic systems is unreliable at 150 ft. or more bls; and (5) for difficult drilling conditions, 24 hr./day drilling is recommended

  20. Flipped Learning, MOOCs and Learning Analytics: Lessons learnt from a Web Map Design course redesign

    Science.gov (United States)

    Treves, R.

    2013-12-01

    Five weeks content of a 12 week course in web map design were converted to 'flipped learning': Lecture sessions were replaced by online short video lectures and multiple choice questions to be completed outside class. Class time was taken up with activities and exercises linked to the online learning. Students use of the online content was carefully tracked and detailed student feedback gathered. The response from students was good, 90% of them completed all the out of class activities and their feedback was very positive. The format has the advantage of being easily repurposed as a MOOC or scaled up in other ways. Lessons learnt from the implementation of the materials and the analysis of the VLE logs will be discussed as will ongoing efforts to reuse the materials in a MOOC.

  1. Development of X-33/X-34 Aerothermodynamic Data Bases: Lessons Learned and Future Enhancements

    Science.gov (United States)

    Miller, C. G.

    2000-01-01

    A synoptic of programmatic and technical lessons learned in the development of aerothermodynamic data bases for the X-33 and X-34 programs is presented in general terms and from the perspective of the NASA Langley Research Center Aerothermodynamics Branch. The format used is that of the "aerothermodynamic chain," the links of which are personnel, facilities, models/test articles, instrumentation, test techniques, and computational fluid dynamics (CFD). Because the aerodynamic data bases upon which the X-33 and X-34 vehicles will fly are almost exclusively from wind tunnel testing, as opposed to CFD, the primary focus of the lessons learned is on ground-based testing. The period corresponding to the development of X-33 and X-34 aerothermodynamic data bases was challenging, since a number of other such programs (e.g., X-38, X-43) competed for resources at a time of downsizing of personnel, facilities, etc., outsourcing, and role changes as NASA Centers served as subcontractors to industry. The impact of this changing environment is embedded in the lessons learned. From a technical perspective, the relatively long times to design and fabricate metallic force and moment models, delays in delivery of models, and a lack of quality assurance to determine the fidelity of model outer mold lines (OML) prior to wind tunnel testing had a major negative impact on the programs. On the positive side, the application of phosphor thermography to obtain global, quantitative heating distributions on rapidly fabricated ceramic models revolutionized the aerothermodynamic optimization of vehicle OMLs, control surfaces, etc. Vehicle designers were provided with aeroheating information prior to, or in conjunction with, aerodynamic information early in the program, thereby allowing trades to be made with both sets of input; in the past only aerodynamic data were available as input. Programmatically, failure to include transonic aerodynamic wind tunnel tests early in the assessment phase

  2. Outline of the Fukushima Daiichi Accident. Lessons Learned and Safety Enhancements

    Science.gov (United States)

    Hirano, Masashi

    2017-09-01

    Abstract. On March 11, 2011, an earthquake and subsequent tsunamis off the Pacific coastline of Japan's Tohoku region caused widespread devastation in Japan. As of June 10, 2016, it is reported that a total of 15,894 people lost their lives and 2,558 people are still unaccounted for. In Fukushima Prefecture, approximately 100,000 people are still obliged to live away from their homes due to the earthquake and tsunami as well as the Fukushima Daiichi accident. On the day, the earthquake and tsunami caused severe damages to the Tokyo Electric Power Company (TEPCO)'s Fukushima Daiichi Nuclear Power Station (NPS). All the units in operation, namely Units 1 to 3, were automatically shut down on seismic reactor protection system trips but the earthquake led to the loss of all off-site electrical power supplies to that site. The subsequent tsunami inundated the site up to 4 to 5 m above its ground level and caused, in the end, the loss of core cooling function in Units 1 to 3, resulting in severe core damages and containment vessel failures in these three units. Hydrogen was released from the containment vessels, leading to explosions in the reactor buildings of Units 1, 3 and 4. Radioactive materials were released to the atmosphere and were deposited on the land and in the ocean. One of the most important lessons learned is an importance to prevent such large scale common cause failures due to extreme natural events. This leads to a conclusion that application of the defense-in-depth philosophy be enhanced because the defense-in-depth philosophy has been and continues to be an effective way to account for uncertainties associated with risks. From the human and organizational viewpoints, the final report from the Investigation Committee of the Government pointed out so-called "safety myth" that existed among nuclear operators including TEPCO as well as the government, that serious severe accidents could never occur in nuclear power plants in Japan. After the accident, the

  3. Environmental Studies, Section V: Oceanography. Learning Carrel Lesson 6.15: Pollution of the Oceans. Study Guide and Script.

    Science.gov (United States)

    Boyer, Robert; And Others

    This is one of a series of 14 instructional components of a semester-long, environmental earth science course developed for undergraduate students. The course includes lectures, discussion sessions, and individual learning carrel lessons. Presented are the study guide and script for a learning carrel lesson on pollution of the oceans. The slides,…

  4. Learning with and about Advertising in Chemistry Education with a Lesson Plan on Natural Cosmetics--A Case Study

    Science.gov (United States)

    Belova, Nadja; Eilks, Ingo

    2015-01-01

    This paper describes a case study on the chemistry behind natural cosmetics in five chemistry learning groups (grades 7-11, age range 13-17) in a German comprehensive school. The lesson plan intends to promote critical media literacy in the chemistry classroom and specifically emphasizes learning with and about advertising. The lessons of four…

  5. A Planetary Geophysicist Does EPO: Lessons Learned Along the Way

    Science.gov (United States)

    Kiefer, W. S.

    2011-12-01

    My "day job" is numerical modeling of the interiors of the terrestrial planets, but I have also done EPO projects for the last 17 years while at the Lunar and Planetary Institute. These range from single, hour long talks in classrooms or astronomy clubs, to week-long summer workshops for teachers and librarians, and even semester-long programs, along with a number of curriculum development projects. EPO projects are a great way to help develop both the next generation of scientists and, more importantly, of scientifically literate citizens and taxpayers. Here are a few lessons learned along the way in the school of hard knocks. (1) An engaging delivery style is even more important in EPO presentations than it is in college lectures or conference presentations. Emphasize a few key concepts rather than numerous facts, and keep the jargon out. Good analogies can go a long way towards explaining a concept to any age group. I teach the role of size in planetary cooling by first asking students how long it takes to cook food of various sizes (a hamburger, roast beef, turkey). (2) If you will be working with a group of students for more than one class period, classroom friendly activities strengthen the learning process. Such activities do not need to be elaborate - when teaching about the Moon, I sometimes assign students to take their parents outside at night and show them how to find lava flows on the Moon. Teachers usually need to have classroom activities that are aligned to state or national teaching standards. Fortunately, many effective, standards-aligned activities already exist, so you don't need to reinvent the wheel. For a useful listing of planetary science and astronomy activities, see the LPI website www.lpi.usra.edu/education/resources/ (3) Although EPO work can be personally rewarding, it is not always well rewarded in a professional context, and it can be difficult to find the time and financial resources to sustain major projects. We sometimes use a

  6. The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

    Science.gov (United States)

    Ryan, R. S.

    1992-03-01

    The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

  7. Lessons learned applying CASE methods/tools to Ada software development projects

    Science.gov (United States)

    Blumberg, Maurice H.; Randall, Richard L.

    1993-01-01

    This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

  8. The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

    Science.gov (United States)

    Ryan, R. S.

    1992-01-01

    The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

  9. Lessons Learned and Flight Results from the F15 Intelligent Flight Control System Project

    Science.gov (United States)

    Bosworth, John

    2006-01-01

    A viewgraph presentation on the lessons learned and flight results from the F15 Intelligent Flight Control System (IFCS) project is shown. The topics include: 1) F-15 IFCS Project Goals; 2) Motivation; 3) IFCS Approach; 4) NASA F-15 #837 Aircraft Description; 5) Flight Envelope; 6) Limited Authority System; 7) NN Floating Limiter; 8) Flight Experiment; 9) Adaptation Goals; 10) Handling Qualities Performance Metric; 11) Project Phases; 12) Indirect Adaptive Control Architecture; 13) Indirect Adaptive Experience and Lessons Learned; 14) Gen II Direct Adaptive Control Architecture; 15) Current Status; 16) Effect of Canard Multiplier; 17) Simulated Canard Failure Stab Open Loop; 18) Canard Multiplier Effect Closed Loop Freq. Resp.; 19) Simulated Canard Failure Stab Open Loop with Adaptation; 20) Canard Multiplier Effect Closed Loop with Adaptation; 21) Gen 2 NN Wts from Simulation; 22) Direct Adaptive Experience and Lessons Learned; and 23) Conclusions

  10. Lessons Learned in Pilot Testing Specialty Consultations to Benefit Individuals with Lower Limb Loss

    Directory of Open Access Journals (Sweden)

    Christine Elnitsky

    2012-12-01

    Full Text Available Telerehabilitation technologies enable the delivery of rehabilitation services from providers to people with disabilities as well as specialty care consultations. This article discusses the barriers experienced when planning and pilot testing a telerehabilitation multi-site specialty consultation for specialists in their medical centers, and the lessons learned. The barriers included integration and participation, coordination across organizational units, and privacy and information security. Lessons learned included the need for collaboration across multiple departments, telerehabilitation equipment back-ups, and anonymous and private communication protocols. Despite delays resulting from coordination at multiple levels of a national organization, we developed a program plan and successfully implemented a pilot test of the southeast region program.  Specialty consultation using telerehabilitation delivery methods requires identifying provider preferences for technological features. Lessons learned could inform development of outpatient telerehabilitation for patients with amputations and studies of patients and providers involved in telerehabilitation.

  11. Lessons Learned from Process Safety Management: A Practical Guide to Defence in Depth

    Energy Technology Data Exchange (ETDEWEB)

    Langerman, N., E-mail: neal@chemical-safety.com [Advanced Chemical Safety, Inc., San Diego (United States)

    2014-10-15

    Full text: Beginning with the experiences of Alfred Nobel, the chemical enterprise has learned from failures and implemented layers of protection to prevent unwanted incidents. Nobel developed dynamite as a more stable alternative to nitroglycerin, a process we would today call “inherently safer technology”. In recent years, the USA has issued regulations requiring formal “risk management plans” to identify and mitigate production risks. The USA set up the “Chemical Safety and Hazard Investigation Board” as an independent investigator of serious chemical enterprise incidents with a mission to issue recommendations aimed at preventing repeated incidents based on lessons learned. Following a particularly violent explosion in Texas in 1989, the US Occupational Safety and Health Administration issued the “Process Safety Management” (PSM) rule. PSM is a singular guide to defence in depth for preventing large-scale production incidents. The formalism is equally applicable to the chemical enterprise and the nuclear installation enterprise. This presentation will discuss the key elements of PSM and offer suggestions on using PSM as a guide to developing multiple layers of protection. The methods of PSM are applicable to Nuclear Generating Stations, research reactors, fuel reprocessing plants and fissile material storage and handling. Examples from both the chemical and nuclear enterprises will be used to illustrate key points. (author)

  12. Lessons learned from MELOX plant operation and support to design of new MOX fuel fabrication plants

    International Nuclear Information System (INIS)

    Tourre, Joel; Gattegno, Robert; Guay, Philippe; Bariteau, Jean-Pierre

    2005-01-01

    AREVA is participating in the design of the US MOX Fuel Fabrication Facility (MFFF). To support this project and allow the U.S. Department of Energy (DOE) client to reap full benefit from the MELOX operating experience, AREVA, through COGEMA and its engineering subsidiary SGN have implemented a rigorous process to prudently apply MELOX Lessons Learned to the MFFF design. This paper describes the Lessons Learned process, how the process supports the advancement of fuel fabrication technology and, how the results of the process are benefiting the client. (author)

  13. SOCAP: Lessons learned in applying SIPE-2 to the military operations crisis action planning domain

    Science.gov (United States)

    Desimone, Roberto

    1992-01-01

    This report describes work funded under the DARPA Planning and Scheduling Initiative that led to the development of SOCAP (System for Operations Crisis Action Planning). In particular, it describes lessons learned in applying SIPE-2, the underlying AI planning technology within SOCAP, to the domain of military operations deliberate and crisis action planning. SOCAP was demonstrated at the U.S. Central Command and at the Pentagon in early 1992. A more detailed report about the lessons learned is currently being prepared. This report was presented during one of the panel discussions on 'The Relevance of Scheduling to AI Planning Systems.'

  14. Learning with multiple representations: an example of a revision lesson in mechanics

    Science.gov (United States)

    Wong, Darren; Poo, Sng Peng; Eng Hock, Ng; Loo Kang, Wee

    2011-03-01

    We describe an example of learning with multiple representations in an A-level revision lesson on mechanics. The context of the problem involved the motion of a ball thrown vertically upwards in air and studying how the associated physical quantities changed during its flight. Different groups of students were assigned to look at the ball's motion using various representations: motion diagrams, vector diagrams, free-body diagrams, verbal description, equations and graphs, drawn against time as well as against displacement. Overall, feedback from students about the lesson was positive. We further discuss the benefits of using computer simulation to support and extend student learning.

  15. Alternative routes for highway shipments of radioactive materials and lessons learned from state designations

    International Nuclear Information System (INIS)

    1990-07-01

    Pursuant to the Hazardous Materials Transportation Act (HMTA), the Department of Transportation (DOT) has promulgated a comprehensive set of regulations regarding the highway transportation of high-level radioactive materials. These regulations, under docket numbers HM-164 and HM-164A, establish interstate highways as the preferred routes for the transportation of radioactive materials within and through the states. The regulations also provide a methodology by which a state may select altemative routes. First, the state must establish a ''state routing agency'', defined as an entity authorized to use the state legal process to impose routing requirements on carriers of radioactive material (49 CFR 171.8). Once identified, the state routing agency must select routes in accordance with DOTs Guidelines for Selecting Preferred Highway Routes for Large Quantity Shipments of Radioactive Materials or an equivalent routing analysis. Adjoining states and localities should be consulted on the impact of proposed alternative routes as a prerequisite of final route selection. Lastly, the states must provide written notice to DOT of any alternative route designation before the routes are deemed effective. The purpose of this report is to discuss the ''lessons learned'' by the five states within the southern region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations

  16. Applying failure mode effects and criticality analysis in radiotherapy: Lessons learned and perspectives of enhancement

    International Nuclear Information System (INIS)

    Scorsetti, Marta; Signori, Chiara; Lattuada, Paola; Urso, Gaetano; Bignardi, Mario; Navarria, Pierina; Castiglioni, Simona; Mancosu, Pietro; Trucco, Paolo

    2010-01-01

    Introduction: The radiation oncology process along with its unique therapeutic properties is also potentially dangerous for the patient, and thus it should be delivered under a systematic risk control. To this aim incident reporting and analysis are not sufficient for assuring patient safety and proactive risk assessment should also be implemented. The paper accounts for some methodological solutions, lessons learned and opportunities for improvement, starting from the systematic application of the failure mode effects and criticality analysis (FMECA) technique to the radiotherapy process of an Italian hospital. Materials and methods: The analysis, performed by a working group made of experts of the radiotherapy unit, was organised into the following steps: (1) complete and detailed analysis of the process (integration definition for function modelling); (2) identification of possible failure modes (FM) of the process, representing sources of adverse events for the patient; (3) qualitative risk assessment of FMs, aimed at identifying priorities of intervention; (4) identification and planning of corrective actions. Results: Organisational and procedural corrective measures were implemented; a set of safety indexes for the process was integrated within the traditional quality assurance indicators measured by the unit. A strong commitment of all the professionals involved was observed and the study revealed to be a powerful 'tool' for dissemination of patient safety culture. Conclusion: The feasibility of FMECA in fostering radiotherapy safety was proven; nevertheless, some lessons learned as well as weaknesses of current practices in risk management open to future research for the integration of retrospective methods (e.g. incident reporting or root cause analysis) and risk assessment.

  17. Learning from Iraq and Afghanistan: Four Lessons for Building More Effective Coalitions

    Directory of Open Access Journals (Sweden)

    White Nathan

    2016-06-01

    Full Text Available Despite many tactical and operational successes by brave military and civilian personnel, post-9/11 operations by U.S. led coalitions in Iraq and Afghanistan did not achieve their intended outcomes. Although many efforts are underway by discrete organizations within coalition countries to identify and learn their own lessons from these conflicts, comparatively less attention is paid to broader lessons for successful coalitions. Given that the U.S. and its allies will most certainly form coalitions in the future for a range of different contingency scenarios, these lessons are equally deserving of close examination. This article identifies four interrelated lessons from Iraq and Afghanistan that can be utilized to inform more effective coalition development and employment.

  18. Learning Android application testing

    CERN Document Server

    Blundell, Paul

    2015-01-01

    If you are an Android developer looking to test your applications or optimize your application development process, then this book is for you. No previous experience in application testing is required.

  19. Lessons learned from the NRU vessel leak repair and return to service projects

    International Nuclear Information System (INIS)

    Heeney, P.; Turcotte, J.

    2011-01-01

    In May 2009 the National Research Universal (NRU) reactor was shut down due to a small leak detected from the reactor vessel into the annulus surrounding the reactor. What ensued was a challenging, yet successful, 15 month long Repair and Return to Service Outage. This Repair and Return to Service Outage presented many first-of-a-kind challenges that provide learning opportunities which have been incorporated into subsequent planned outages. These lessons learned are invaluable tools to be used in the planning and execution of future outages. Following the repair of the NRU vessel, AECL was required to conduct annual inspections of the vessel wall. These inspections require an annual Extended Outage (up to 4 weeks in length). A planned Extended Outage was conducted in May/June 2011 and provided an opportunity to implement some of the lessons learned during the Repair and Return to Service Outage. Lessons learned from that Extended Outage have been incorporated in the subsequent monthly maintenance outages, with lessons learned sessions being held after each outage to ensure that the execution of outages is constantly improving. (author)

  20. A Doctoral Seminar in Qualitative Research Methods: Lessons Learned

    Directory of Open Access Journals (Sweden)

    Suzanne Franco

    2016-09-01

    Full Text Available New qualitative research methods continue to emerge in response to factors such as renewed interest in mixed methods, better understanding of the importance of a researcher’s philosophical stance, as well as the increased use of technology in data collection and analysis, to name a few. As a result, those facilitating research methods courses must revisit content and instructional strategies in order to prepare well-informed researchers. Approaches range from paradigm to pragmatic emphasis. This descriptive case study of a doctoral seminar for novice qualitative researchers describes the intricacies of the syllabus of a pragmatic approach in a constructivist/social constructionist learning environment. The purpose was to document the delivery and faculty/student interactions and reactions. Noteworthy were the contradictions and frustrations in the delivery as well as in student experiences. In the end, student input led to seminal learning experiences. The confirmation of the effectiveness of a constructivist/social constructivist learning environment is applicable to higher education pedagogy in general.