WorldWideScience

Sample records for leslie pickering francis

  1. Honoring Leslie A. Geddes - farewell ...

    Science.gov (United States)

    Valentinuzzi, Max E

    2010-01-05

    Honor thy father and thy mother, say the Holy Scriptures1, for they at least gave thee this biological life, but honor thy teachers, too, for they gave thee knowledge and example.Leslie Alexander Geddes took off on a long, long trip, Sunday October 25, 2009, leaving his body for medical and research use. The departing station was West Lafayette, Indiana, where he set foot in 1974, at Purdue University, stamping there a unique deep imprint, similar and probably more profound than the one left at Baylor College of Medicine (BCM), Houston, Texas, in the period 1955-1974. Memories came back as a flood the minute after a message broke the news to me: When I first met him visiting the Department of Physiology at BCM back in 1962, my first Classical Physiology with Modern Instrumentation Summer Course ... The versatile Physiograph was the main equipment, an electronic-mechanical three or four channel recorder that could pick up a variety of physiological variables. Les and his collaborators had introduced also the impedance pneumograph, which was a simplified version of previous developments made by others. It became a ubiquitous unit that trod many roads in the hands of eager and curious students. Ventricular fibrillation and especially its counterpart, defibrillation, stand out as subjects occupying his concern along the years. Many were the students recruited to such effort and long is the list of papers on the subject. Physiological signals attracted considerable part of his activities because one of his perennial mottos was measurement is essential in physiology. He has written thirteen books and over eight hundred scientific papers, receiving also several prizes and distinctions. Not only his interests stayed within the academic environment but an industrial hue was manifested in over 20 USA patents, all applied to medical use. History of science and technology was another area in which, often with Hebbel Hoff, he uncovered astounding and delightful information. It

  2. Pickering nuclear fish diversion net

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, J.; Lew, A. [Ontario Power Generation, Toronto, Ontario (Canada)

    2013-07-01

    Pickering Fish Diversion Net - An Engineered Environmental Solution that has significantly reduced fish impingement at the Pickering Nuclear Facility. Note: As a recent urgent request/discussed by Mark Elliot, CNE-OPG and Jacques Plourde, CNS.

  3. Pickering tool management system

    International Nuclear Information System (INIS)

    Wong, E.H.; Green, A.H.

    1997-01-01

    Tools were being deployed in the station with no process in effect to ensure that they are maintained in good repair so as to effectively support the performance of Maintenance activities. Today's legal requirements require that all employers have a process in place to ensure that tools are maintained in a safe condition. This is specified in the Ontario Health and Safety Act. The Pickering Tool Management System has been chosen as the process at Pickering N.D to manage tools. Tools are identified by number etching and bar codes. The system is a Windows application installed on several file servers

  4. Leslie Ford, MD | Division of Cancer Prevention

    Science.gov (United States)

    Dr. Leslie Ford built clinical cancer prevention research as a scientific field when few people were considering the possibility of prevention, and is recognized as a national and international leader in cancer prevention research. She has a passion for prevention and strong belief that all clinical science must, to the fullest extent possible, derive as a translation of basic

  5. Pickering seismic safety margin

    International Nuclear Information System (INIS)

    Ghobarah, A.; Heidebrecht, A.C.; Tso, W.K.

    1992-06-01

    A study was conducted to recommend a methodology for the seismic safety margin review of existing Canadian CANDU nuclear generating stations such as Pickering A. The purpose of the seismic safety margin review is to determine whether the nuclear plant has sufficient seismic safety margin over its design basis to assure plant safety. In this review process, it is possible to identify the weak links which might limit the seismic performance of critical structures, systems and components. The proposed methodology is a modification the EPRI (Electric Power Research Institute) approach. The methodology includes: the characterization of the site margin earthquake, the definition of the performance criteria for the elements of a success path, and the determination of the seismic withstand capacity. It is proposed that the margin earthquake be established on the basis of using historical records and the regional seismo-tectonic and site specific evaluations. The ability of the components and systems to withstand the margin earthquake is determined by database comparisons, inspection, analysis or testing. An implementation plan for the application of the methodology to the Pickering A NGS is prepared

  6. Francis Picabia hilislooming

    Index Scriptorium Estoniae

    1998-01-01

    Aastavahetusel Hamburgi teises Deichtorhalles olnud näitusest, kus eksponeeriti Francis Picabia (1879-1953) loomingut alates 1935. aastast. Näitus tutvustas Picabiat kui aktimaalijat, portretisti, fotograafi ja kirjameest

  7. Book Review: Leslie Holmes, Corruption: A Very Short Introduction

    DEFF Research Database (Denmark)

    Keremis, Anestis

    2017-01-01

    Book review of: Corruption. A Very Short Introduction / by Leslie Holmes. Oxford: Oxford University Press, 2015. 143pp., £7.99 (p/b), ISBN 9780199689699.......Book review of: Corruption. A Very Short Introduction / by Leslie Holmes. Oxford: Oxford University Press, 2015. 143pp., £7.99 (p/b), ISBN 9780199689699....

  8. Pickering safeguards: a preliminary analysis

    International Nuclear Information System (INIS)

    Todd, J.L.; Hodgkinson, J.G.

    1977-05-01

    A summary is presented of thoughts relative to a systems approach for implementing international safeguards. Included is a preliminary analysis of the Pickering Generating Station followed by a suggested safeguards system for the facility

  9. Leslie Martin and the formal order

    Directory of Open Access Journals (Sweden)

    Jaime J. Ferrer Fores

    2016-05-01

    Full Text Available Abstract This paper analyzes the architecture of Sir Leslie Martin (1908-2000 and covers the intense professional career that starts with the Nursery School at Northwich, Cheshire (1937-1938 or the Alastair Morton house at Brampton (1938 which are ascribed to the orthodoxy of modern architecture, and  continues with the projects he planned as the architect responsible of the railway company for stations and railroad infrastructure rearrangements in the postwar, interventions that will prepare him for his architectural maturity stage which he crystallizes in buildings for the Royal Festival Hall in London (1948-1951, the Harvey Court, Cambridge (1958-1962, the auditoriums  for the Middleton Hall, University of Hull (1958 , the School of Music  (1974 and College (1979 at Cambridge University and his proposal for  the University of Bristol (1979 that illustrate the essential basis of his  coherent architectural career where the tradition of modern architecture, the spatial continuity and the formal order converge. This analysis of the works in the fifties, sixties and seventies illustrates the architect’s constants  through the chronological exploration of his works that reveal the  compositional mechanisms, the search for formal order and the correct spatial organization taking into account the functional requirements, the relationship with the site and the technological resources that determine his entire career which is characterized by formal consistency and architectural coherence.

  10. Waste Pickers: Why are they there?

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH

    2011-07-01

    Full Text Available of pickers ? Increase job stability and earnings of pickers ? Enhance the effectiveness of their contribution to waste management ? Entrepreneural activities as observed require a level of organisation in the informal sector ? Research are required... about 4 400 pickers operational in Johannesburg 15/07/2011 3 ? CSIR 2011 www.csir.co.za Informal sector waste pickers and entrepreneurs ? Do not pay taxes ? No trading license ? No social welfare or government insurance scheme...

  11. Interviewing Francis Bacon

    OpenAIRE

    Kisters, Sandra

    2012-01-01

    British painter Francis Bacon (1909-1992) was known for the eloquence with which he talked about his art. He was easy to talk to, and was interviewed countless times by numerous critics. However, when studying Bacon's paintings one soon comes across the published interviews with art critic and curator David Sylvester (1924-2001), who interviewed him as many as 18 times between 1962 and 1986. Art historian Sandra Kisters argues that Sylvester's interviews with Bacon are carefully constructed a...

  12. The Francis Crick Institute.

    Science.gov (United States)

    Peters, Keith; Smith, Jim

    2017-04-01

    The Francis Crick Institute Laboratory, opened in 2016, is supported by the Medical Research Council, Cancer Research UK, the Wellcome Trust, and University College London, King's College London and Imperial College London. The emphasis on research training and early independence of gifted scientists in a multidisciplinary environment provides unique opportunities for UK medical science, including clinical and translational research. © Royal College of Physicians 2017. All rights reserved.

  13. Leslie Peltier, Amateur Astronomer and Observer Extraordinaire

    Science.gov (United States)

    Corbin, B. G.

    2003-12-01

    Leslie Copus Peltier, (Jan. 2, 1900-May 10, 1980) was called "the world's greatest non-professional astronomer" by none other than Harlow Shapley, and also referred to as the "the world's greatest living amateur astronomer". He began observing variable stars on March 1, 1918 with an observation of R. Leonis and at the time of his death had made a total of 132,123 observations of variable stars. These were reported to the AAVSO on a consecutive monthly basis stretching from 1918 to his death in 1980. As of October 2003, he was still on AAVSO's list of the top 25 observers in its history. Born on a farm near Delphos, Ohio, his parents were well read and their home was filled with books on different subjects, including nature guides. As a young man he studied the flora and fauna of the area and in 1915 began his study of the heavens with Vega being the first star he identified. After the purchase of a 2-inch spyglass, his observations of variable stars began to be noticed by professional astronomers and the AAVSO loaned him a 4-inch Mogey refractor; shortly thereafter Henry Norris Russell of Princeton loaned him via the AAVSO a 6-inch refractor, a comet seeker of short focus. He discovered 12 comets, 10 of which carry his name, and 6 novae or recurring novae. His design of the "Merry-Go-Round Observatory" was a novel approach with the whole observatory revolving around the observer while seated in his observing chair. Miami University (Ohio) later donated to him their 12-inch Clark refractor with its dome. His first book, Starlight Nights: The Adventures of a Star-Gazer, appeared in 1965. This autobiography, an ode to the joys of observing both the night sky and nature, was written in beautifully descriptive language that helped lead countless readers into astronomy. Departing from astronomy, in 1977 he published The Place on Jennings Creek. Written in the style of the 19th century naturalist, the book was devoted to his family's home, Brookhaven, and its natural

  14. Pickering NGS-A versus Pickering NGS-B: changes in commissioning techniques and their impact

    International Nuclear Information System (INIS)

    Talbot, K.H.

    1983-05-01

    Modernization of equipment, changes in design codes and standards, and tightening of regulatory requirements have combined to make Pickering NGS-B in many ways different from its predecessor, Pickering 'A'. This paper briefly describes how a few selected commissioning techniques used to place Pickering 'A' into service were further developed to cope with the new requirements for Pickering 'B'. The relative performance of the commissioning programmes between the two stations is also compared

  15. Rigorous derivation from Landau-de Gennes theory to Ericksen-Leslie theory

    OpenAIRE

    Wang, Wei; Zhang, Pingwen; Zhang, Zhifei

    2013-01-01

    Starting from Beris-Edwards system for the liquid crystal, we present a rigorous derivation of Ericksen-Leslie system with general Ericksen stress and Leslie stress by using the Hilbert expansion method.

  16. Book Review Counselling and Coping by Kerry Gibson, Leslie ...

    African Journals Online (AJOL)

    Book Review Counselling and Coping by Kerry Gibson, Leslie Swartz and Rob Sandenbergh. Alison Moultrie, Alison Moultrie. Abstract. 2002, Oxford University Press ISBN 0–19–571868 2. Journal of Child and. Adolescent Mental Health 2003, 15(1): 55. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL ...

  17. Commissioning quality assurance at Pickering NGS

    International Nuclear Information System (INIS)

    Wieckowski, J.T.

    1983-05-01

    Ontario Hydro decided in 1978 to implement a formal quality assurance program applicable to commissioning and operation of nuclear generating stations. Pickering NGS is the first station to have the commissioning quality assurance (CQA) program applied to it. This paper outlines the scope, implementation, and evaluation of the CQA program as applied to Pickering Unit 5

  18. Evolutionary formalism from random Leslie matrices in biology

    International Nuclear Information System (INIS)

    Caceres, M.O.; Caceres-Saez, I.

    2008-07-01

    We present a perturbative formalism to deal with linear random matrix difference equations. We generalize the concept of the population growth rate when a Leslie matrix has random elements (i.e., characterizing the disorder in the vital parameters). The dominant eigenvalue of which defines the asymptotic dynamics of the mean value population vector state, is presented as the effective growth rate of a random Leslie model. This eigenvalue is calculated from the largest positive root of a secular polynomial. Analytical (exact and perturbative calculations) results are presented for several models of disorder. A 3 x 3 numerical example is applied to study the effective growth rate characterizing the long-time dynamics of a population biological case: the Tursiops sp. (author)

  19. Pickering Unit 1 chemical cleaning

    International Nuclear Information System (INIS)

    Smee, J.L.; Fiola, R.J.; Brennenstuhl, K.R.; Zerkee, D.D.; Daniel, C.M.

    1995-01-01

    The secondary sides of all 12 boilers at Pickering Unit 1 were chemically cleaned in 1994 by the team of Ontario Hydro, B and W International (Cambridge, Ontario) and B and W Nuclear Technologies (Lynchburg, Virginia). A multi-step EPRI/SGOG process was employed in a similar manner to previous clearings at Units 5 and 6 in 1992 and 1993, respectively. A major innovation with the Unit 1 cleaning was the incorporation of a crevice cleaning step, the first time this had been done on Ontario Hydro plants. In addition, six boilers were cleaned in parallel compared to three at a time in previous Pickering cleanings. This significantly reduced cleaning time. A total of 6,770 kg of sludge was removed through direct chemical dissolution. It consisted of 66% iron/nickel oxides and 28% copper metal. A total of 1,600,000 L (420,000 US gallons) of liquid waste was produced. It was processed through the spent solvent treatment facility located at the Bruce Nuclear Power Development site. Visual inspection performed after the cleaning indicated that the crevices between the boiler tubes and the tube support structure were completely clear of deposit and the general condition of the tubing and lattice bars appeared to be in 'as new' condition. (author)

  20. Pickering emulsions for skin decontamination.

    Science.gov (United States)

    Salerno, Alicia; Bolzinger, Marie-Alexandrine; Rolland, Pauline; Chevalier, Yves; Josse, Denis; Briançon, Stéphanie

    2016-08-01

    This study aimed at developing innovative systems for skin decontamination. Pickering emulsions, i.e. solid-stabilized emulsions, containing silica (S-PE) or Fuller's earth (FE-PE) were formulated. Their efficiency for skin decontamination was evaluated, in vitro, 45min after an exposure to VX, one of the most highly toxic chemical warfare agents. Pickering emulsions were compared to FE (FE-W) and silica (S-W) aqueous suspensions. PE containing an oil with a similar hydrophobicity to VX should promote its extraction. All the formulations reduced significantly the amount of VX quantified on and into the skin compared to the control. Wiping the skin surface with a pad already allowed removing more than half of VX. FE-W was the less efficient (85% of VX removed). The other formulations (FE-PE, S-PE and S-W) resulted in more than 90% of the quantity of VX removed. The charge of particles was the most influential factor. The low pH of formulations containing silica favored electrostatic interactions of VX with particles explaining the better elimination from the skin surface. Formulations containing FE had basic pH, and weak interactions with VX did not improve the skin decontamination. However, these low interactions between VX and FE promote the transfer of VX into the oil droplets in the FE-PE. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Pickering NGS end of commercial operations

    Energy Technology Data Exchange (ETDEWEB)

    Swami, L. [Ontario Power Generation, Pickering, ON (Canada)

    2015-07-01

    Pickering continues as a valued asset for the Province • OPG's current business plan is to continue to operate Pickering to the end of 2020 • Planning its shutdown is underway and includes the following activities to: • Place the units into safe store • Manage the wastes arising • Repurpose the Pickering lands and facilities • Decommissioning will take place in the future and will include appropriate waste management activities. © Copyright 2015 by the Canadian Nuclear Society. All rights reserved.

  2. Francis Bacon's behavioral psychology.

    Science.gov (United States)

    MacDonald, Paul S

    2007-01-01

    Francis Bacon offers two accounts of the nature and function of the human mind: one is a medical-physical account of the composition and operation of spirits specific to human beings, the other is a behavioral account of the character and activities of individual persons. The medical-physical account is a run-of-the-mill version of the late Renaissance model of elemental constituents and humoral temperaments. The other, less well-known, behavioral account represents an unusual position in early modern philosophy. This theory espouses a form of behavioral psychology according to which (a) supposed mental properties are "hidden forms" best described in dispositional terms, (b) the true character of an individual can be discovered in his observable behavior, and (c) an "informed" understanding of these properties permits the prediction and control of human behavior. Both of Bacon's theories of human nature fall under his general notion of systematic science: his medical-physical theory of vital spirits is theoretical natural philosophy and his behavioral theory of disposition and expression is operative natural philosophy. Because natural philosophy as a whole is "the inquiry of causes and the production of effects," knowledge of human nature falls under the same two-part definition. It is an inquisition of forms that pertains to the patterns of minute motions in the vital spirits and the production of effects that pertains both to the way these hidden motions produce behavioral effects and to the way in which a skillful agent is able to produce desired effects in other persons' behavior. (c) 2007 Wiley Periodicals, Inc.

  3. Pipe support program at Pickering

    International Nuclear Information System (INIS)

    Sahazizian, L.A.; Jazic, Z.

    1997-01-01

    This paper describes the pipe support program at Pickering. The program addresses the highest priority in operating nuclear generating stations, safety. We present the need: safety, the process: managed and strategic, and the result: assurance of critical piping integrity. In the past, surveillance programs periodically inspected some systems, equipment, and individual components. This comprehensive program is based on a managed process that assesses risk to identify critical piping systems and supports and to develop a strategy for surveillance and maintenance. The strategy addresses all critical piping supports. Successful implementation of the program has provided assurance of critical piping and support integrity and has contributed to decreasing probability of pipe failure, reducing risk to worker and public safety, improving configuration management, and reducing probability of production losses. (author)

  4. Francis Crick (1916–2004)

    Indian Academy of Sciences (India)

    Administrator

    The death of Francis Crick deprives us of one of the great- est scientists of the 20th century, whose creativity and power of mind dominated molecular biology in its golden years. Many people have told the story of his achievements; here I would simply like to recollect some of the qualities of this remarkable man. The first ...

  5. Francis Crick (1916–2004)

    Indian Academy of Sciences (India)

    Administrator

    him. When somebody gave a lecture, Francis was ready at the end (and often in the middle) to give them a lucid and exact account of what their work meant, for better or for worse. This made the Laboratory of Molecular Biology's end-of-year lectures a terrifying ordeal for many, but in- creased their intellectual value, and ...

  6. Arresting relaxation in Pickering Emulsions

    Science.gov (United States)

    Atherton, Tim; Burke, Chris

    2015-03-01

    Pickering emulsions consist of droplets of one fluid dispersed in a host fluid and stabilized by colloidal particles absorbed at the fluid-fluid interface. Everyday materials such as crude oil and food products like salad dressing are examples of these materials. Particles can stabilize non spherical droplet shapes in these emulsions through the following sequence: first, an isolated droplet is deformed, e.g. by an electric field, increasing the surface area above the equilibrium value; additional particles are then adsorbed to the interface reducing the surface tension. The droplet is then allowed to relax toward a sphere. If more particles were adsorbed than can be accommodated by the surface area of the spherical ground state, relaxation of the droplet is arrested at some non-spherical shape. Because the energetic cost of removing adsorbed colloids exceeds the interfacial driving force, these configurations can remain stable over long timescales. In this presentation, we present a computational study of the ordering present in anisotropic droplets produced through the mechanism of arrested relaxation and discuss the interplay between the geometry of the droplet, the dynamical process that produced it, and the structure of the defects observed.

  7. Pickering education centre aids nuclear acceptance

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Activities at the new education centre at Pickering are described. The opening of the Nuclear Communications Centre, in 1978, resulting from a search for an effective means of maintaining public acceptance of Ontario Hydro's extensive nuclear power programme. Activities include participation in the interactive computer games, guided tours of educational exhibits including a model of Pickering A generating station, and displays depicting the Candu fuel cycle, outdoor exhibits of renewable energy sources, and tours of the plant. Outside activities include lectures to schools and citizen, business, or professional groups. (U.K.)

  8. Francis Bacon and Jacobean legitimation

    OpenAIRE

    Rodríguez García, José María

    1997-01-01

    Francis Bacon (1561-1626) maintained a lifelong interest in the institutional implementation of experimental science. What changed over the years were the rhetorical strategies employed to give this project legitimacy. I systematize those changes by dividing Bacon's works into three groups according to three criteria: what rite of officialization is enacted in each text (e.g., conversion, fatherly generation, royal delegation); who the inscribed addressee is (e.g., an imagin...

  9. The Pickering mesonet 1988 data report

    International Nuclear Information System (INIS)

    Salmon, J.R.; Taylor, P.A.

    1989-10-01

    This report describes the demonstration mesoscale meteorological monitoring network (mesonet) installed in the vicinity of the Pickering Nuclear Generating Station. It also summarizes the data collected by the network during 1988 and provides some examples of situations in which mesoscale effects dominate the local wind flow

  10. Francis Bacon, un moderne intempestif

    OpenAIRE

    Mavrakis, Annie

    2017-01-01

    À propos de la peinture de Francis Bacon et en prenant appui sur des réflexions de Michel Leiris, cet article se propose de revenir sur la question de la modernité conçue non de façon absolue (LA modernité, non figurative, anti-littéraire) mais relative, dégagée d’une vision historiciste orientée de l’histoire de l’art. Cette modernité est intempestive puisque, s’opposant au classique (cf. La Querelle des Anciens et des Modernes) et non au périmé, elle fait revivre les grandes problématiques ...

  11. Comparison of Pickering NGS performance with world power reactors, 1977

    International Nuclear Information System (INIS)

    Buhay, S.

    Pickering NGS performance is compared, in highly graphic form, with the perfomance of other nuclear power plants around the world. The four Pickering reactors score in the top six, rated by gross capacity factor. Major system suppliers for world power reactors above 500 MW are cataloged. (E.C.B.)

  12. Data-driven warehouse optimization : Deploying skills of order pickers

    NARCIS (Netherlands)

    M. Matusiak (Marek); M.B.M. de Koster (René); J. Saarinen (Jari)

    2015-01-01

    textabstractBatching orders and routing order pickers is a commonly studied problem in many picker-to-parts warehouses. The impact of individual differences in picking skills on performance has received little attention. In this paper, we show that taking into account differences in the skills of

  13. Francis Bacon and the Technology of Style.

    Science.gov (United States)

    Baker, Christopher

    1983-01-01

    Examines Francis Bacon's intentionally devised style for scientific writings and the theoretical basis of that style. Discusses his emphasis on a truly objective point of view, and his use of aphorisms to adapt to his audience. (HTH)

  14. Francis Crick, DNA, and the Central Dogma

    Science.gov (United States)

    Olby, Robert

    1970-01-01

    This essay describes how Francis Crick, ex-physicist, entered the field of biology and discovered the structure of DNA. Emphasis is upon the double helix, the sequence hypothesis, the central dogma, and the genetic code. (VW)

  15. Pickering Nuclear site wide groundwater monitoring system

    International Nuclear Information System (INIS)

    DeWilde, J.; Chin-Cheong, D.; Lledo, C.; Wootton, R.; Belanger, D.; Hansen, K.

    2001-01-01

    Ontario Power Generation Inc. (OPG) is continuing its efforts to understand the chemical and physical characteristics of the groundwater flow systems beneath the Pickering Nuclear Generating Station (PNGS). To this end, OPG constructed a site-wide Groundwater Monitoring System (GMS) at the PNGS to provide support to other ongoing environmental investigations and to provide a means to monitor current and future groundwater environmental issues. This paper will present the results of this work, including the development of a state-of-the-art data management system for storage and retrieval of environmental data for the site, which has applications for other power generation facilities. (author)

  16. Francis Bacon and Magnetical Cosmology.

    Science.gov (United States)

    Wang, Xiaona

    2016-12-01

    A short-lived but important movement in seventeenth-century English natural philosophy—which scholars call “magnetical philosophy” or “magnetical cosmology”—sought to understand gravity (both terrestrial and celestial) by analogy with magnetism. The movement was clearly inspired by William Gilbert’s De magnete (1600) and culminated with Robert Hooke’s prefiguring of the universal principle of gravitation, which he personally communicated to Isaac Newton in 1679. But the magnetical cosmology, as professed by those in the movement, differed from Gilbert’s philosophy in highly significant ways. Proponents never accepted Gilbert’s animistic account of magnets and seem tacitly to have accepted a belief in action at a distance that Gilbert himself rejected. This essay argues that Francis Bacon (1561–1626) had already provided just the adaptations to Gilbert’s philosophy that the later thinkers adopted, including an important endorsement of action at a distance, and that he should be recognized as playing an important role in the movement.

  17. Tuning Amphiphilicity of Particles for Controllable Pickering Emulsion

    Directory of Open Access Journals (Sweden)

    Zhen Wang

    2016-11-01

    Full Text Available Pickering emulsions with the use of particles as emulsifiers have been extensively used in scientific research and industrial production due to their edge in biocompatibility and stability compared with traditional emulsions. The control over Pickering emulsion stability and type plays a significant role in these applications. Among the present methods to build controllable Pickering emulsions, tuning the amphiphilicity of particles is comparatively effective and has attracted enormous attention. In this review, we highlight some recent advances in tuning the amphiphilicity of particles for controlling the stability and type of Pickering emulsions. The amphiphilicity of three types of particles including rigid particles, soft particles, and Janus particles are tailored by means of different mechanisms and discussed here in detail. The stabilization-destabilization interconversion and phase inversion of Pickering emulsions have been successfully achieved by changing the surface properties of these particles. This article provides a comprehensive review of controllable Pickering emulsions, which is expected to stimulate inspiration for designing and preparing novel Pickering emulsions, and ultimately directing the preparation of functional materials.

  18. Toxocariasis in waste pickers: a case control seroprevalence study.

    Directory of Open Access Journals (Sweden)

    Cosme Alvarado-Esquivel

    Full Text Available BACKGROUND: The epidemiology of Toxocara infection in humans in Mexico has been poorly explored. There is a lack of information about Toxocara infection in waste pickers. AIMS: Determine the seroepidemiology of Toxocara infection in waste pickers. METHODS: Through a case control study design, the presence of anti-Toxocara IgG antibodies was determined in 90 waste pickers and 90 age- and gender-matched controls using an enzyme-linked immunoassay. Associations of Toxocara exposure with socio-demographic, work, clinical, and behavioral data of the waste pickers were also evaluated. RESULTS: The seroprevalence of anti-Toxocara IgG antibodies was significantly higher in waste pickers (12/90: 13% than in control subjects (1/90: 1% (OR = 14; 95% CI: 2-288. The seroprevalence was not influenced by socio-demographic or work characteristics. In contrast, increased seroprevalence was found in waste pickers suffering from gastritis, and reflex and visual impairments. Multivariate analysis showed that Toxocara exposure was associated with a low frequency of eating out of home (OR = 26; 95% CI: 2-363 and negatively associated with consumption of chicken meat (OR = 0.03; 95% CI: 0.003-0.59. Other behavioral characteristics such as animal contacts or exposure to soil were not associated with Toxocara seropositivity. CONCLUSIONS: 1 Waste pickers are a risk group for Toxocara infection. 2 Toxocara is impacting the health of waste pickers. This is the first report of Toxocara exposure in waste pickers and of associations of gastritis and reflex impairment with Toxocara seropositivity. Results warrant for further research.

  19. Nanocellulose-stabilized Pickering emulsions and their applications.

    Science.gov (United States)

    Fujisawa, Shuji; Togawa, Eiji; Kuroda, Katsushi

    2017-01-01

    Pickering emulsion, which is an emulsion stabilized by solid particles, offers a wide range of potential applications because it generally provides a more stable system than surfactant-stabilized emulsion. Among various solid stabilizers, nanocellulose may open up new opportunities for future Pickering emulsions owing to its unique nanosizes, amphiphilicity, and other favorable properties (e.g. chemical stability, biodegradability, biocompatibility, and renewability). In this review, the preparation and properties of nanocellulose-stabilized Pickering emulsions are summarized. We also provide future perspectives on their applications, such as drug delivery, food, and composite materials.

  20. An impulsive predator-prey system with modified Leslie-Gower and Holling type II schemes

    International Nuclear Information System (INIS)

    Guo Hongjian; Song Xinyu

    2008-01-01

    An impulsive predator-prey system with modified Leslie-Gower and Holling-type II schemes is presented. By using the Floquet theory of impulsive equation and small amplitude perturbation method, the globally asymptotical stability of prey-free positive periodic solution and the permanence of system are discussed. The corresponding threshold conditions are obtained respectively. Finally, numerical simulations are given

  1. Leslie S. Greenberg: Award for Distinguished Professional Contributions to Applied Research

    Science.gov (United States)

    American Psychologist, 2012

    2012-01-01

    Presents a short biography of the 2012 winner of the American Psychological Association's Award for Distinguished Professional Contributions to Applied Research. Leslie S. Greenberg is an exemplary scientist-practitioner whose pioneering work has significantly altered the landscape of the field of psychotherapy research and practice. His seminal…

  2. Domestic Resistance: Gardening, Mothering, and Storytelling in Leslie Marmon Silko's "Gardens in the Dunes"

    Science.gov (United States)

    Li, Stephanie

    2009-01-01

    Leslie Marmon Silko began her most recent work, "Gardens in the Dunes" (1999), intending to write a novel that would not be political. Following the publication of "Almanac of the Dead" (1992), which was simultaneously hailed as one of the most important books of the twentieth century and condemned for its angry self-righteousness, Silko…

  3. Pickering irradiated fuel transfer conveyor isolation

    Energy Technology Data Exchange (ETDEWEB)

    Koivisto, D J; Eijsermans, L J [Atomic Energy of Canada Ltd., Mississauga, ON (Canada)

    1997-12-31

    Pickering A NGS has been in operation for 25 years and is one of the longest in service CANDU stations. Some underwater fuel handling equipment, notably the conveyor stops, have been without maintenance throughout that time. This paper describes the concept of a conveyor isolation system that permits draining of a single or multiple elevator columns and also the early stages of a development program for the elastomeric sealing element. The prototype seal element has been proven in lab tests to be capable of limiting leakage to 0.5 IGPM (imperial gallons per minute) at the design pressure of 6.5 psi. The design of a sealing element is particularly interesting because the conveyor tube is a square cross-section which contains an additional obstruction , a conveyor drive cable. A seal delivery, actuating and positioning system has been conceptually laid out and the design is proceeding, with projected implementation in 1998. (author). 8 figs.

  4. Pickering irradiated fuel transfer conveyor isolation

    International Nuclear Information System (INIS)

    Koivisto, D.J.; Eijsermans, L.J.

    1996-01-01

    Pickering A NGS has been in operation for 25 years and is one of the longest in service CANDU stations. Some underwater fuel handling equipment, notably the conveyor stops, have been without maintenance throughout that time. This paper describes the concept of a conveyor isolation system that permits draining of a single or multiple elevator columns and also the early stages of a development program for the elastomeric sealing element. The prototype seal element has been proven in lab tests to be capable of limiting leakage to 0.5 IGPM (imperial gallons per minute) at the design pressure of 6.5 psi. The design of a sealing element is particularly interesting because the conveyor tube is a square cross-section which contains an additional obstruction , a conveyor drive cable. A seal delivery, actuating and positioning system has been conceptually laid out and the design is proceeding, with projected implementation in 1998. (author). 8 figs

  5. Poetic and Francis Bacon's Ambivalence toward Language.

    Science.gov (United States)

    Pribble, Paula Tompkins

    Just as rhetoric is a way of knowing, so is poetic, both of which, for Francis Bacon, produce false knowledge. But Bacon is not entirely negative. When the poetic elements of language are used in strategic and public communication, like the scholarly communication Bacon attempts to reform, poetic and rhetoric work together to create a plurality of…

  6. AECB staff review of Pickering NGS operations for the year 1988

    International Nuclear Information System (INIS)

    1989-05-01

    The operation of Pickering NGS-A Units 1-4 and Pickering NGS-B Units 5-8 are monitored to ensure compliance with licensing requirements by the AECB Pickering project office staff. This report presents AECB staff's review of major licensing issues and of the operational performance of Pickering NGS during 1988. The report is limited to those aspects that AECB staff considers to have particular safety significance. More detailed information on routine performance is contained in Ontario Hydro's 1988 Quarterly Technical Reports for Pickering NGS-A and Pickering NGS-B

  7. A Discrete Numerical Scheme of Modified Leslie-Gower With Harvesting Model

    Directory of Open Access Journals (Sweden)

    Riski Nur Istiqomah Dinnullah

    2018-05-01

    Full Text Available Recently, exploitation of biological resources and the harvesting of two populations or more are widely practiced, such as fishery or foresty. The simplest way to describe the interaction of two species is by using predator prey model, that is one species feeds on another. The Leslie-Gower predator prey model has been studied in many works. In this paper, we use Euler method to discretisize the modified Leslie-Gower with harvesting model. The model consists of two simultanious predator prey equations. We show numerically that this discrete numerical scheme model is dynamically consistent with its continuous model only for relatively small step-size. By using computer simulation software, we show that equlibrium points can be stable, saddles, and unstable. It is shown that the numerical simulations not only illustrate the results, but also show the rich dynamics behaviors of the discrete system.

  8. Dynamics of Leslie-Gower type generalist predator in a tri-trophic food web system

    Czech Academy of Sciences Publication Activity Database

    Priyadarshi, Anupam; Gakkhar, S.

    2013-01-01

    Roč. 18, č. 11 (2013), s. 3202-3218 ISSN 1007-5704 R&D Projects: GA MŠk(CZ) EE2.3.30.0032 Institutional support: RVO:60077344 Keywords : Leslie-Gower model * hopf-bifurcation * periodic orbits Subject RIV: EH - Ecology, Behaviour Impact factor: 2.569, year: 2013 http://www.sciencedirect.com/science/article/pii/S1007570413001032#

  9. The work of Leslie Valiant: alle die Strassen führen nach Strassen

    Directory of Open Access Journals (Sweden)

    J. Andrés Montoya

    2014-12-01

    Full Text Available . This year Leslie VALIANT becomes sixty five years old; we celebrate his fest with this work in which we analyze some of his major achievements. We focus our attention on those of his works for which a strong influence of Volker Strassen can be easily detected. Strassen’s work has had a strong and lasting influence on Valiant. It does not means, as the title could suggest, that the manyfaced, relevant and complex work of Leslie Valiant can be understood as a corollary to Strassen. Resumen. Este año Leslie VALIANT cumple 65 años y nosotros queremos celebrar este importante aniversario con este trabajo en el que se analiza su obra. Centramos nuestra atención en aquellos de sus trabajos en los que una clara influencia de Volker STRASSEN puede ser detectada. Es patente la influencia de Strassen en la obra de Valiant, pero esto no quiere decir que el trabajo de Valiant, complejo y multifacético, sea un simple corolario a la obra del primero.

  10. Cavitation erosion prediction on Francis turbines

    Energy Technology Data Exchange (ETDEWEB)

    Bourdon, P.; Farhat, M.; Simoneau, R.; Lavigne, P. [Hydro-Quebec, Montreal, PQ (Canada); Pereira, F.; Dupont, P.; Avellan, F.; Caron, J.F. [IMHEF/EPFL, (France); Dorey, J.M.; Archer, A. [Electricite de France (EDF), 92 - Clamart (France). Dir. des Etudes et Recherches; and others

    1997-12-31

    On-board aggressiveness measurement methods were tested on a severely eroded prototype blade of a 266 MW Francis turbine: pressure, pit counting, DECER electrochemical and vibration measurements. The test program provided understanding of the heterogeneous erosion distribution of the prototype blades and quantitative data for comparison in subsequent tests on the model of the machine. Model tests and flow analysis were also performed, to detect cavitation on a Francis turbine model. The results are compared to those obtained on the prototype measurements. The model used for that study is built on the basis of a geometrical recovery of one of the most eroded blade of the prototype. Different methods were investigated to predict cavitation erosion on Francis turbines from model. They are based on measurement of pitting, pressure fluctuations and acceleration. The methods proposed are suitable to measure cavitation aggressiveness on model and on prototype, and that the level on the model is several orders of magnitude smaller than on the prototype. (author) 18 refs.

  11. Pickering unit 1 containment leakage characterization

    International Nuclear Information System (INIS)

    Zakaib, G.D.

    1994-01-01

    Results of the design pressure test carried out on Pickering Reactor Building number 1 during late 1992 showed that the leakage rate of the building was close to the safety analysis value of 2.7% contained mass per hour at the design pressure of 41.4 kPa(g) and was significantly higher than that reported after the previous test conducted in the spring of 1987. This unexpected finding initiated the longest and the most comprehensive containment leakage investigation ever undertaken by Ontario Hydro. A thorough investigation of leakage behaviour by repeated testing, inspections, leak search and analysis was launched. The extensive leak search effort included items such as: leak source detection by soap solution application, use of ultrasonic detectors, fogging and tracer gas techniques, systematic systems isolation, thermal imaging of the exterior, and quantification of leak sites by flowmeter and bagging. Using a specially designed volumetric technique, the root cause of the problem was finally confirmed as being due to 'pressure dependent laminar leakage' through the hairline cracks in the dome concrete. Structural analysis indicated that the thermal gradients and pressure loading combined to cause the cracking early in the structure's operating history and that overall structural integrity has not been compromised. Leakage rate analysis using a new fluid mechanics model augmented by the effect of thermal strains indicated that the leakage could be significantly less under certain transient temperature gradient conditions. Several options for repairing the dome were considered by a multidisciplinary team and it was finally decided to apply a specially engineered multilayer elastomeric coating to the exterior concrete surface. When the unit was re-tested in October 1993, a dramatic ten-fold improvement in leakage rate (down to 0.25%/h at design pressure) was observed. This is lower than even the commissioning results and comparable to the performance of newer units

  12. Superhydrophobic cellulose-based bionanocomposite films from Pickering emulsions

    Science.gov (United States)

    Bayer, Ilker S.; Steele, Adam; Martorana, Philip J.; Loth, Eric; Miller, Lance

    2009-04-01

    Inherently superhydrophobic and flexible cellulose-based bionanocomposites were fabricated from solid stabilized (Pickering) emulsions. Emulsions were formed by dispersing cyclosiloxanes in water stabilized by layered silicate particles and were subsequently modified by blending into a zinc oxide nanofluid. The polymer matrix was a blend of cellulose nitrate and fluoroacrylic polymer (Zonyl 8740) precompatibilized in solution. Coatings were spray cast onto aluminum substrates from polymer blends dispersed in modified Pickering emulsions. No postsurface treatment was required to induce superhydrophobicity. Effect of antiseptic additives on bionanocomposite superhydrophobicity is also discussed. Replacing cellulose nitrate with commercial liquid bandage solutions produced identical superhydrophobic coatings.

  13. From pioneering to implementing automated blood pressure measurement in clinical practice: Thomas Pickering's legacy

    DEFF Research Database (Denmark)

    Stolarz-Skrzypek, Katarzyna; Thijs, Lutgarde; Wizner, Barbara

    2010-01-01

    Thomas G. Pickering spent most of his scientific career in carrying out research on clinical hypertension and blood pressure (BP) measurement. In our review of Pickering's seminal work, we first focused on white-coat hypertension and masked hypertension, two terms that he had introduced. Next, we...... highlighted the early publications of Pickering on diurnal BP variability and on the clinical application of self-measured BP. Pickering's work inspired many investigators worldwide and constituted a solid basis for further research. Pickering's original ideas led to algorithms for risk stratification...

  14. Particle Shape Anisotropy in Pickering Emulsions: Cubes and Peanuts

    NARCIS (Netherlands)

    de Folter, J.W.J.; Hutter, E.M.; Castillo, S.I.R.; Klop, K.E.; Philipse, A.P.; Kegel, W.K.

    2014-01-01

    We have investigated the effect of particle shape in Pickering emulsions by employing, for the first time, cubic and peanut-shaped particles. The interfacial packing and orientation of anisotropic microparticles are revealed at the single-particle level by direct microscopy observations. The uniform

  15. Pickering Emulsions for Food Applications: Background, Trends, and Challenges

    NARCIS (Netherlands)

    Berton-Carabin, C.C.; Schroën, C.G.P.H.

    2015-01-01

    Particle-stabilized emulsions, also referred to as Pickering emulsions, have garnered exponentially increasing interest in recent years. This has also led to the first food applications, although the number of related publications is still rather low. The involved stabilization mechanisms are

  16. Picker versus stripper harvesters on the High Plains of Texas

    Science.gov (United States)

    A break even analysis based on NPV was conducted to compare picker-based and stripper-based harvest systems with and without field cleaners. Under no conditions analyzed was the NPV of a stripper system without a field cleaner greater than a stripper system with a field cleaner. Break even curves re...

  17. Seismic assessment of the Pickering pressure relief duct

    International Nuclear Information System (INIS)

    Ghobarah, A.

    1995-05-01

    The objectives of the study are to examine the structural response of the Pickering pressure relief duct when subjected to earthquake ground motion and to estimate the seismic withstand capacity of various components of the structural system on the basis of performance criteria consistent with the safety function of the duct. (author). 24 refs., 16 tabs., 31 figs

  18. Homage to Francis Perrin - 1901-1992

    International Nuclear Information System (INIS)

    1994-05-01

    Francis Perrin had a brilliant and rapid career. He was a strict and honest man. He had a fast intelligence, a huge knowledge, he was faithful. Finally his courtesy and his generosity had made of him an outstanding and model personality very little known because of his extreme discretion. He lived his professional career (1920-1970) with passion. He thought that science might be one mankind heritage. He worked in CEA and played a crucial role in the CERN creation. He was an accomplished scientist since he tackled the mathematics, physics, and even chemistry scope. 52 refs

  19. Failure analysis of a Francis turbine runner

    Energy Technology Data Exchange (ETDEWEB)

    Frunzaverde, D; Campian, V [Research Center in Hydraulics, Automation and Heat Transfer, ' Eftimie Murgu' University of Resita P-ta Traian Vuia 1-4, RO-320085, Resita (Romania); Muntean, S [Centre of Advanced Research in Engineering Sciences, Romanian Academy - Timisoara Branch Bv. Mihai Viteazu 24, RO-300223, Timisoara (Romania); Marginean, G [University of Applied Sciences Gelsenkirchen, Neidenburger Str. 10, 45877 Gelsenkirchen (Germany); Marsavina, L [Department of Strength, ' Politehnica' University of Timisoara, Bv. Mihai Viteazu 1, RO-300222, Timisoara (Romania); Terzi, R; Serban, V, E-mail: gabriela.marginean@fh-gelsenkirchen.d, E-mail: d.frunzaverde@uem.r [Ramnicu Valcea Subsidiary, S.C. Hidroelectrica S.A., Str. Decebal 11, RO-240255, Ramnicu Valcea (Romania)

    2010-08-15

    The variable demand on the energy market requires great flexibility in operating hydraulic turbines. Therefore, turbines are frequently operated over an extended range of regimes. Francis turbines operating at partial load present pressure fluctuations due to the vortex rope in the draft tube cone. This phenomenon generates strong vibrations and noise that may produce failures on the mechanical elements of the machine. This paper presents the failure analysis of a broken Francis turbine runner blade. The failure appeared some months after the welding repair work realized in situ on fatigue cracks initiated near to the trailing edge at the junction with the crown, where stress concentration occurs. In order to determine the causes that led to the fracture of the runner blade, the metallographic investigations on a sample obtained from the blade is carried out. The metallographic investigations included macroscopic and microscopic examinations, both performed with light and scanning electron microscopy, as well as EDX - analyses. These investigations led to the conclusion, that the cracking of the blade was caused by fatigue, initiated by the surface unevenness of the welding seam. The failure was accelerated by the hydrogen embrittlement of the filling material, which appeared as a consequence of improper welding conditions. In addition to the metallographic investigations, numerical computations with finite element analysis are performed in order to evaluate the deformation and stress distribution on blade.

  20. Failure analysis of a Francis turbine runner

    International Nuclear Information System (INIS)

    Frunzaverde, D; Campian, V; Muntean, S; Marginean, G; Marsavina, L; Terzi, R; Serban, V

    2010-01-01

    The variable demand on the energy market requires great flexibility in operating hydraulic turbines. Therefore, turbines are frequently operated over an extended range of regimes. Francis turbines operating at partial load present pressure fluctuations due to the vortex rope in the draft tube cone. This phenomenon generates strong vibrations and noise that may produce failures on the mechanical elements of the machine. This paper presents the failure analysis of a broken Francis turbine runner blade. The failure appeared some months after the welding repair work realized in situ on fatigue cracks initiated near to the trailing edge at the junction with the crown, where stress concentration occurs. In order to determine the causes that led to the fracture of the runner blade, the metallographic investigations on a sample obtained from the blade is carried out. The metallographic investigations included macroscopic and microscopic examinations, both performed with light and scanning electron microscopy, as well as EDX - analyses. These investigations led to the conclusion, that the cracking of the blade was caused by fatigue, initiated by the surface unevenness of the welding seam. The failure was accelerated by the hydrogen embrittlement of the filling material, which appeared as a consequence of improper welding conditions. In addition to the metallographic investigations, numerical computations with finite element analysis are performed in order to evaluate the deformation and stress distribution on blade.

  1. Francis Crick: A Singular Approach to Scientific Discovery.

    Science.gov (United States)

    Lawrence, Peter A

    2016-12-01

    Francis' office window (at the Salk) commanded a panorama of the Pacific. "This grand natural scene was a physical correlate of Francis's intellectual world: wide-ranging, brilliantly lit, a little overawing, but also immensely inviting and above all an exciting place to be." (Mitchison, 2004). Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Development of a 5kw Francis Turbine Runner Using Computation ...

    African Journals Online (AJOL)

    A small scale Francis turbine runner for a turbine located at Awba dam in the University of Ibadan with designed head and flow rate of 6m and 0.244m3/s is designed. The basic design of the Francis turbine runner is completed based on basic fluid dynamics turbo machinery principles. A 2-D and 3-D steady state, ...

  3. [Sir Francis Galton: the father of eugenics].

    Science.gov (United States)

    Aubert-Marson, Dominique

    2009-01-01

    Not only was Sir Francis Galton a famous geographer and statistician, he also invented "eugenics" in 1883. Eugenics, defined as the science of improving racial stock, was developed from a new heredity theory, conceived by Galton himself, and from the evolution theory of Charles Darwin, transposed to human society by Herbert Spencer. Galton's eugenics was a program to artificially produce a better human race through regulating marriage and thus procreation. Galton put particular emphasis on "positive eugenics", aimed at encouraging the physically and mentally superior members of the population to choose partners with similar traits. In 1904, he presented his ideas in front of a vast audience of physicians and scientists in London. His widely-publicized lecture served as the starting point for the development of eugenics groups in Europe and the United States during the first half of the 20th century.

  4. O duplo legado de Francis Poulenc

    Directory of Open Access Journals (Sweden)

    Joana Resende

    2009-12-01

    Full Text Available Déjàvu,or better,déjà écouté is an appropriate expression to describe an audition of certain works by Francis Poulenc (1899-1963. A sui-generis character in 20th century music, Poulenc has questioned the whole heritage that came before him, French or not, according to the premises of the group he belonged to, Les Six, although not always reaching similar results. His main concern was to make good music, an ideal not far from that of Debussy, “music should humbly seek to please” (Harry Halbreich. This article approaches the use of quotation and other processes of allusion in the works by Poulenc, as seen in his voice and piano mélodies cycle La fraîcheur et le feu, identifying thematic, melodic, and harmonic, origins used coherently in several pieces. and helping to solidly build his musical language.

  5. Moderator inlet line hanger replacement for Pickering nuclear power station

    International Nuclear Information System (INIS)

    Kirkpatrick, R.A.; Bowman, J.M.; Symmons, W.R.; El-Nesr, S.

    1988-01-01

    Ontario Hydro's Pickering Nuclear Generating Station (PNGS), Units 1 and 2 were shutdown for large scale fuel channel replacement. Other nonroutine inspection and maintenance activities were performed to determine the overall condition of the units and it was seen that a moderator inlet line hanger (identified as HR-29) had failed in both units. Subsequent inspections during planned maintenance outages of Pickering NGS Units 3 and 4 revealed that hanger HR-29 had failed and required replacement. A research program was conducted to find a suitable technique. These problems included accessing tooling through small inspection ports, manipulating tooling from a significant distance and the high radiation fields within the vault. This paper describes the program undertaken to replace hanger HR-29. (author)

  6. "Vältimatud nuhtlused" : August Komendant, Louis I. Kahn ja arhitektuuri ning insenerikunsti keerulised suhted / Thomas Leslie

    Index Scriptorium Estoniae

    Leslie, Thomas

    2006-01-01

    Artikkel põhineb Thomas Leslie Kuressaares Louis Kahni päevadel peetud ettekandel. Louis Kahni koostöös August Komendandiga projekteeritud hoonetest pikemalt Richardsi Meditsiiniliste Uuringute laboratooriumist, Salki bioloogianistituudist (1959-1965, La Jolla, Kalifornia) ja Kimbelli kunstimuuseumist (1966-1972, Texas, Fort Worth). Bibl. lk. 75

  7. Safe “cloudification” of large images through picker APIs

    Science.gov (United States)

    Bremer, Erich; Kurc, Tahsin; Gao, Yi; Saltz, Joel; Almeida, Jonas S

    2016-01-01

    The “Box model” allows users with no particular training in informatics, or access to specialized infrastructure, operate generic cloud computing resources through a temporary URI dereferencing mechanism known as “drop-file-picker API” (“picker API” for sort). This application programming interface (API) was popularized in the web app development community by DropBox, and is now a consumer-facing feature of all major cloud computing platforms such as Box.com, Google Drive and Amazon S3. This reports describes a prototype web service application that uses picker APIs to expose a new, “cloudified”, API tailored for image analysis, without compromising the private governance of the data exposed. In order to better understand this cross-platform cloud computing landscape, we first measured the time for both transfer and traversing of large image files generated by whole slide imaging (WSI) in Digital Pathology. The verification that there is extensive interconnectivity between cloud resources let to the development of a prototype software application that exposes an image-traversing REST API to image files stored in any of the consumer-facing “boxes”. In summary, an image file can be upload/synchronized into a any cloud resource with a file picker API and the prototype service described here will expose an HTTP REST API that remains within the safety of the user’s own governance. The open source prototype is publicly available at sbu-bmi.github.io/imagebox. Availability The accompanying prototype application is made publicly available, fully functional, with open source, at http://sbu-bmi.github.io/imagebox://sbu-bmi.github.io/imagebox. An illustrative webcasted use of this Web App is included with the project codebase at https://github.com/SBU-BMI/imageboxs://github.com/SBU-BMI/imagebox. PMID:28269829

  8. Safe "cloudification" of large images through picker APIs.

    Science.gov (United States)

    Bremer, Erich; Kurc, Tahsin; Gao, Yi; Saltz, Joel; Almeida, Jonas S

    2016-01-01

    The "Box model" allows users with no particular training in informatics, or access to specialized infrastructure, operate generic cloud computing resources through a temporary URI dereferencing mechanism known as "drop-file-picker API" ("picker API" for sort). This application programming interface (API) was popularized in the web app development community by DropBox, and is now a consumer-facing feature of all major cloud computing platforms such as Box.com, Google Drive and Amazon S3. This reports describes a prototype web service application that uses picker APIs to expose a new, "cloudified", API tailored for image analysis, without compromising the private governance of the data exposed. In order to better understand this cross-platform cloud computing landscape, we first measured the time for both transfer and traversing of large image files generated by whole slide imaging (WSI) in Digital Pathology. The verification that there is extensive interconnectivity between cloud resources let to the development of a prototype software application that exposes an image-traversing REST API to image files stored in any of the consumer-facing "boxes". In summary, an image file can be upload/synchronized into a any cloud resource with a file picker API and the prototype service described here will expose an HTTP REST API that remains within the safety of the user's own governance. The open source prototype is publicly available at sbu-bmi.github.io/imagebox. Availability The accompanying prototype application is made publicly available, fully functional, with open source, at http://sbu-bmi.github.io/imagebox://sbu-bmi.github.io/imagebox. An illustrative webcasted use of this Web App is included with the project codebase at https://github.com/SBU-BMI/imageboxs://github.com/SBU-BMI/imagebox.

  9. The cracking of pressure tubes in the Pickering reactor

    International Nuclear Information System (INIS)

    Ross-Ross, P.A.

    1978-01-01

    Small cracks in 17 of the 390 pressure tubes in Unit 3 of the 2056 MW (electrical) Pickering Generating Station and of 52 tubes in Unit 4, resulted in each of these units being out of service for many months. The cracks originated at areas of extremely high residual tensile stress produced by improper positioning of the rolling tool used during construction to join the pressure tube to its end-fitting. The mechanism of failure was delayed hydrogen cracking. (author)

  10. A modified Leslie-Gower predator-prey interaction model and parameter identifiability

    Science.gov (United States)

    Tripathi, Jai Prakash; Meghwani, Suraj S.; Thakur, Manoj; Abbas, Syed

    2018-01-01

    In this work, bifurcation and a systematic approach for estimation of identifiable parameters of a modified Leslie-Gower predator-prey system with Crowley-Martin functional response and prey refuge is discussed. Global asymptotic stability is discussed by applying fluctuation lemma. The system undergoes into Hopf bifurcation with respect to parameters intrinsic growth rate of predators (s) and prey reserve (m). The stability of Hopf bifurcation is also discussed by calculating Lyapunov number. The sensitivity analysis of the considered model system with respect to all variables is performed which also supports our theoretical study. To estimate the unknown parameter from the data, an optimization procedure (pseudo-random search algorithm) is adopted. System responses and phase plots for estimated parameters are also compared with true noise free data. It is found that the system dynamics with true set of parametric values is similar to the estimated parametric values. Numerical simulations are presented to substantiate the analytical findings.

  11. Leslie Marmon Silko and Simon J. Ortiz: Pathways to the Tradition

    Directory of Open Access Journals (Sweden)

    Dave Henderson

    2011-10-01

    Full Text Available Both Leslie Marmon Silko and Simon J. Ortiz have retold the story of a 1952 murder by two Pueblo brothers, a story that both writers first heard during their childhood years as it quickly became part of the local Native American traditional corpus. Both Silko and Ortiz are self-consciously indebted to the Native American storytelling tradition, particularly with respect to its malleability in the face of change, a fluidity that operates in tension with the preservation of certain fundamental religious and philosophical constants. Accordingly, Silko and Ortiz see their stories as providing pathways to the tradition, molding, reforming, and contributing to it without departing from it. Content, tone, style, and purpose are analyzed to reveal the variants in their redactions.

  12. Ergonomic Evaluation of Battery Powered Portable Cotton Picker

    Science.gov (United States)

    Dixit, A.; Manes, G. S.; Singh, A.; Prakash, A.; Mahal, J. S.

    2012-09-01

    Ergonomic evaluation of battery powered portable manual cotton picker was carried out on two subjects for three cotton varieties and was compared against manual method of picking. It is a hand operated machine and has a pair of chain with small sharp edged teeth and sprockets and is operated by a light weight 12 V battery. Cotton gets entangled with the chain and is collected and guided into the collection bag. Average heart rate, oxygen consumption, workload, energy expenditure was more in case of cotton picking by manual cotton picker as compared to manual picking for both the subjects for all three cotton variety types. Oxygen consumption varied from 0.81 to 0.97 l/min, workload varied from 36.32 to 46.16 W and energy expenditure varied from 16.83 to 20.33 kJ/min for both the subject in case of machine picking for all three cotton varieties. The maximum discomfort experienced by the subjects during picking cotton by manual cotton picker was in right wrist palm, right forearm, upper and lower back, left shoulder and in lower legs and both feet.

  13. The "Immortal" Boilermaker: Exploring the Forgotten History of Harry Guyer Leslie

    Directory of Open Access Journals (Sweden)

    Elizabeth Hudson

    2012-01-01

    Full Text Available As Purdue University grows, the school’s rich history is sometimes neglected in lieu of developments in present-day interests and needs. Often, the only remaining evidence of community events and distinguished, local individuals are memorials, archive collections, and rarely seen documents. Many communities have access to such documents; however, as the available access to these collections slowly becomes unrecognized, so does the history and remembrance of the individuals and events. The purpose of this research was to determine the source of a small, tarnished trophy in Orlando Itin’s sports memorabilia collection in Bruno’s Pizza Restaurant. This trophy stands as one of the unrecognized items of living history in West Lafayette, Indiana, which spurred the research and development of a further question: how can community historians discover the concealed facts of their local history? Throughout this research, personal interviews and careful searches were conducted through Purdue University’s Virginia Kelly Karnes Archives and Special Collections Research Center, local collections, online databases, and academic journals to recollect the memory of the recipient of the forgotten trophy, former Indiana Governor Harry Guyer Leslie. Leslie was not only a Purdue graduate, but a survivor of the infamous 1903 Purdue Wreck. He made numerous contributions to the University and overcame adversity to become governor of Indiana, but his memory and contributions to the University and state are barely documented. This article explores not only Governor Leslie’s history, but also examines the methods community historians can use to conduct their own local research.

  14. Assessing Attitude towards Religion: The Astley-Francis Scale of Attitude towards Theistic Faith

    Science.gov (United States)

    Astley, Jeff; Francis, Leslie J.; Robbins, Mandy

    2012-01-01

    This study builds on the research tradition modelled by the Francis Scale of Attitude towards Christianity, the Katz-Francis Scale of Attitude towards Judaism, the Sahin-Francis Scale of Attitude towards Islam and the Santosh-Francis Scale of Attitude towards Hinduism to propose a generic instrument concerned with attitudes towards theistic faith.…

  15. Francis Goyat kuuleb pühapäeval

    Index Scriptorium Estoniae

    2003-01-01

    Belgia kitarristist Francis Goyast, kontsertidest Pärnu kontserdimajas 19. nov., Tartus Vanemuise kontserdimajas 21.nov ja Tallinnas Estonia kontserdisaalis 23. nov., heliplaadist "Pleased to meet You, Mr. Valgre"

  16. Francis Bacon: “pintar sensações” (Francis Bacon: “to paint sensations”)

    OpenAIRE

    Borges, Sonia; UVA

    2013-01-01

    RESUMO O texto aborda, pela via da psicanálise, o que consideramos como o “método” de Francis Bacon: “pintar sensações”. Para isto, tomo, como referências principais, a Carta 52 (1896), da correspondência de Freud com Fliess, e Em busca do tempo perdido, romance de Marcel Proust ([1922] 1995), observando a possibilidade de considerar o que Proust nomeia como “memória involuntária” e o seu papel no processo criativo como uma ilustração esclarecedora do que Freud nos traz na Carta sobre a estr...

  17. A POÉTICA DE FRANCIS BACON

    Directory of Open Access Journals (Sweden)

    Sonia Borges

    2013-02-01

    Full Text Available A partir da perspectiva psicanalítica, a autora aborda a obra de Francis Bacon se utilizando de uma concepção estética que a reconhece como uma realidade ontológica. Dessa forma, considera que como obra de arte, são seus próprios elementos constitutivos, numa tensão interna, que são capazes de provocar efeitos ou as sensações que são o seu objetivo último conforme defendia Bacon. Em sua análise a autora examina e discute a dialética “tempo - espaço”, revelada pelo poeta pintor, como sendo de especial interesse para a clínica psicanalítica na medida em que esclarece importantes questões relativas ao Real como impossível, tal como o compreendeu Lacan. A pintura de Bacon examinada como referência à “sublimação criacionista da pulsão de morte” permite, segundo a autora, vislumbrarmos o para além da cadeia significante. Conclui que a arte, assim como a clínica psicanalítica, supõe deslocamentos subjetivos que implicam corte - rompimento com a tendência unificadora e pacificadora de Eros.

  18. HydroHillChart – Francis module. Software used to Calculate the Hill Chart of the Francis Hydraulic Turbines

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-07-01

    Full Text Available The paper presents the Hydro Hill Chart - Francis module application, used to calculate the hill chart of the Pelton, Francis and Kaplan hydraulic turbine models, by processing the data measured on the stand. After describing the interface and menu, the input data is graphically presented and the universal characteristic for measuring scenarios ao=const. and n11=const is calculated. Finally, the two calculated hill charts are compared through a graphical superimposition of the isolines.

  19. From pioneering to implementing automated blood pressure measurement in clinical practice: Thomas Pickering's legacy

    DEFF Research Database (Denmark)

    Stolarz-Skrzypek, Katarzyna; Thijs, Lutgarde; Wizner, Barbara

    2010-01-01

    Thomas G. Pickering spent most of his scientific career in carrying out research on clinical hypertension and blood pressure (BP) measurement. In our review of Pickering's seminal work, we first focused on white-coat hypertension and masked hypertension, two terms that he had introduced. Next, we...

  20. Edible foam based on Pickering effect of probiotic bacteria and milk proteins

    DEFF Research Database (Denmark)

    Yücel, Cigdem; Geng, Xiaolu; Cárdenas, Marité

    2017-01-01

    We report the preparation and characterization of aqueous Pickering foams using bio-particles constituted by lactic acid bacteria surface modified by oppositely charged milk proteins. Cell surface modification was shown by zeta potential measurements. Foams stabilized by bacterial Pickering bio-p...

  1. Mortality rate estimation for eelgrass Zostera marina (Potamogetonaceae using projections from Leslie matrices

    Directory of Open Access Journals (Sweden)

    Olga Flores Uzeta

    2008-09-01

    Full Text Available The main goal of this study is to provide estimations of mean mortality rate of vegetative shoots of the seagrass Zostera marina in a meadow near Ensenada Baja California, using a technique that minimizes destructive sampling. Using cohorts and Leslie matrices, three life tables were constructed, each representing a season within the period of monthly sampling (April 1999 to April 2000. Ages for the cohorts were established in terms of Plastochrone Interval (PI. The matrices were projected through time to estimate the mean total number of individuals at time t, n(t as well as mortality. We found no statistical differences between observed and predicted mean values for these variables (t=-0.11, p=0.92 for n(t and t=0.69, p=0.5 for mean rate of mortality. We found high correlation coefficient values between observed and projected values for monthly number of individuals (r=0.70, p=0.007 and monthly mortality rates (r=0.81, p=0.001. If at a certain time t a sudden environmental change occurs, and as long as the perturbation does not provoke the killing of all the individuals of a given age i for 0 ≤ i ≤ x - 1, there will be a prevailing number of individuals of age or stage x at a time t+1. This nondestructive technique reduces the number of field visits and samples needed for the demographic analysis of Z. marina, and therefore decreases the disturbance caused by researches to the ecosystem. Rev. Biol. Trop. 56 (3: 1015-1022. Epub 2008 September 30El propósito principal de este estudio es el de proveer estimaciones de tasas promedio de mortalidad de tallos vegetativos de Zostera marina en una pradera cercana a Ensenada Baja California, utilizando una técnica que minimiza los muestreos destructivos para estos pastos marinos. Mediante la utilización de cohortes y matrices de Leslie, se construyeron tres tablas de vida, cada una representando a una estación dentro de período anual de muestreos mensuales (Abril 1999 a Abril 2000. Las edades

  2. PROFILE OF PLASTIC WATER BOTTLES WASTES PROCESSING BUSINESS UNIT FOR WASTE PICKERS

    Directory of Open Access Journals (Sweden)

    Herijanto P.

    2017-09-01

    Full Text Available Used plastic water bottles waste pickers can be categorized as one of the informal sector’s component. They work for themselves by picking up used water bottles and selling them to the waste collectors. The problem to be solved in this research is How the Most Appropriate Used Plastic Water Bottles Business Model for Waste Pickers Is that enables them to be categorized as formal sector. From the result of the interview with 120 waste pickers, 96 results were qualified to be analyzed. The interview was located in several waste collectors, which were visited by waste pickers at certain hours. The data were analyzed descriptively based on six business aspects. Specifically for production facilities, Quality Function Deployment (QFD and Value Engineering (VE analysis were performed. The results of the analysis indicate that the business is practicable for waste pickers and has the potential to enable them run a formal business sector.

  3. Primary heat transport pump mechanical seal replacement strategy for Pickering B

    International Nuclear Information System (INIS)

    Chacinsi, V.

    1995-01-01

    Pickering Nuclear Generating Station is a CANDU PHWR eight unit station located on Lake Ontario. The station is divided into Pickering A (Units 1 to 4) and Pickering B (Units 5 to 8). Pickering B is the focus of this paper. Each unit is rated at 540 MWe. The Primary Heat Transport (PHT) system, which is used to cool the fuel, is divided into four quadrants. Each quadrant has four vertical Byron Jackson PHT main circulation pumps. Three pumps in each quadrant are required for normal operation, leaving one pump in each quadrant as a spare. Each Pickering PHT pump has a Byron Jackson Type SU two stage mechanical seal. The typical pressure breakdown across the seal is 8.7-4.5-1.0 MPa. Certain features of seal operation and the PHT system which influence seal replacement are discussed below. (author)

  4. Warehouse order-picking process. Order-picker routing problem

    Directory of Open Access Journals (Sweden)

    E. V. Korobkov

    2015-01-01

    Full Text Available This article continues “Warehouse order-picking process” cycle and describes order-picker routing sub-problem of a warehouse order-picking process. It draws analogies between the orderpickers’ routing problem and traveling salesman’s problem, shows differences between the standard problem statement of a traveling salesman and routing problem of warehouse orderpickers, and gives the particular Steiner’s problem statement of a traveling salesman.Warehouse layout with a typical order is represented by a graph, with some its vertices corresponding to mandatory order-picker’s visits and some other ones being noncompulsory. The paper describes an optimal Ratliff-Rosenthal algorithm to solve order-picker’s routing problem for the single-block warehouses, i.e. warehouses with only two crossing aisles, defines seven equivalent classes of partial routing sub-graphs and five transitions used to have an optimal routing sub-graph of a order-picker. An extension of optimal Ratliff-Rosenthal order-picker routing algorithm for multi-block warehouses is presented and also reasons for using the routing heuristics instead of exact optimal algorithms are given. The paper offers algorithmic description of the following seven routing heuristics: S-shaped, return, midpoint, largest gap, aisle-by-aisle, composite, and combined as well as modification of combined heuristics. The comparison of orderpicker routing heuristics for one- and two-block warehouses is to be described in the next article of the “Warehouse order-picking process” cycle.

  5. Ontario Hydro Pickering Generating Station fuel handling system performance

    International Nuclear Information System (INIS)

    Underhill, H.J.

    1986-01-01

    The report briefly describes the Pickering Nuclear Generating Station (PNGS) on-power fuel handling system and refuelling cycle. Lifetime performance parameters of the fuelling system are presented, including station incapability charged to the fuel handling system, cost of operating and maintenance, dose expenditure, events causing system unavailability, maintenance and refuelling strategy. It is concluded that the 'CANDU' on-power fuelling system, by consistently contributing less than 1% to the PNGS incapability, has been credited with a 6 to 20% increase in reactor capacity factor, compared to off-power fuelling schemes. (author)

  6. The 1994 loss of coolant incident at Pickering NGS

    Energy Technology Data Exchange (ETDEWEB)

    Charlebois, P R; Clarke, T R; Goodman, R M; McEwan, W F [Ontario Hydro, Pickering, ON (Canada). Pickering Generating Station; Cuttler, J M [Atomic Energy of Canada Ltd., Mississauga, ON (Canada)

    1996-12-31

    Fracture of the rubber diaphragm in a liquid relief valve initiated events leading to a loss of coolant in Unit 2, on December 10. The valve failed open, filling the bleed condenser. The reactor shut itself down. When pressure recovered, two spring-loaded safety relief valves opened and one of them chattered. The shock and pulsations cracked the inlet pipe to the chattering valve, and the subsequent loss of coolant triggered the emergency core cooling system. The incident was terminated by operator action. No abnormal radioactivity was released. The four reactor units of Pickering A remained shut down until the corrective actions were completed in April/May 1995. (author). 4 figs.

  7. Online control loop tuning in Pickering Nuclear Generating Stations

    International Nuclear Information System (INIS)

    Yu, K.X.; Harrington, S.

    2008-01-01

    Most analog controllers in the Pickering B Nuclear Generating Stations adopted PID control scheme. In replacing the analog controllers with digital controllers, the PID control strategies, including the original tuning parameters were retained. The replacement strategy resulted in minimum effort on control loop tuning. In a few cases, however, it was found during commissioning that control loop tuning was required as a result of poor control loop performance, typically due to slow response and controlled process oscillation. Several factors are accounted for the necessities of control loop re-tuning. Our experience in commissioning the digital controllers showed that online control tuning posted some challenges in nuclear power plant. (author)

  8. The attached algae community near Pickering GS: III

    International Nuclear Information System (INIS)

    McKinley, S.R.

    1982-01-01

    The relationship between attached algae and macro-invertebrates in the nearshore zone of Lake Ontario was investigated in the vicinity of the Pickering 'A' NGS. Measures of faunal density, richness, evenness, and biomass were generally higher from areas which supported attached algae. Gammarus fasciatus, Cricotopus bicinctus, Dicrotendipes spp., Orthocladius obumbratus, Cladotanytarsus spp., Orthocladius spp., and Parakiefferiella spp., were significantly correlated with algal standing crop. All of the above dominant invertebrates ingested epiphytes associated with Cladophora glomerata. Attempts to explain the distribution of the zoobenthic assemblages using the physical/biological characteristics of the study area indicated algal cover, substrate size, wind velocity and water temperature were most important

  9. Seismic analysis of mechanical systems at Pickering NGS

    International Nuclear Information System (INIS)

    Ghobarah, A.

    1995-11-01

    The objective of this study is to assess the seismic withstand capacity of selected safety-related mechanical systems associated with the Pressure Relief Duct (PRD) at the Pickering A Nuclear Generating Station. These systems are attached to the PRD and include the Emergency Coolant Injection System piping, the Vacuum Ducts, the Emergency Water Storage System, the PRD expansion joint seals and the PRD to Reactor Building joint seals. The input support motion to the mechanical systems is taken to be the seismic response of the PRD determined in an earlier study using various levels of predetermined ground response spectrum envelope. (author). 12 refs., 13 tabs., 48 figs

  10. Measurement of pressure pulsations in Francis turbines

    Energy Technology Data Exchange (ETDEWEB)

    Kobro, Einar

    2010-11-15

    The work presented in this thesis involves preparation and execution of measurements on Francis runners. The measurements were performed by means of onboard measuring equipment both in model runners and full-scale prototype runners. Also, analysis of the measured data, and the discussion of the results, is presented. The measurements resulted in large data sets. These data sets were used by the author to investigate the dynamic pressure and strain in the runners. The results of the analysis can be used as input in future turbine design. Andritz Hydro AG has used the data for verification of their numerical simulation tools. In connection with the refurbishment of Tokke power plant, two model runners were made available for onboard pressure measurements. To investigate the dynamic pressure in these runners, methods for integration of pressure transducers in the runner blades needed to be developed. After initial difficulties during the preparation, successful measurements were obtained from both model runners. At Tokke power plant, both the original and replacement runners were made accessible for onboard pressure and strain gauge measurements. On the original Kvaerner Brug AS runner, the test was prepared and performed by the author. This test failed, due to water intrusion in the logging chain. The second test was performed on the Andritz Hydro AG replacement runner. This test was prepared and performed by the author in close cooperation with Andritz Hydro AG, and the results were successful. The analysis results from both model and prototype runners show that the wake leaving the guide vanes is the most severe source of dynamic pressure in the runner. The draft tube vortex rope pulsation propagates upstream the runner, but does not appear as a significant frequency in the runner strain measurements. (Author)

  11. Keeping Secrets: Leslie E. Keeley, the Gold Cure and the Nineteenth-Century Neuroscience of Addiction.

    Science.gov (United States)

    Hickman, Timothy A

    2018-03-25

    Dr Leslie E. Keeley was perhaps the world's most famous addiction cure doctor at the turn of the twentieth century, but mainstream medicine dismissed him as a quack because he dispensed a secret cure. The article aims to describe Keeley's now largely forgotten story and to draw attention to the role of contextual issues in the acceptance or rejection of any theory of addiction, particularly the neuroscientific theories of the early twenty first century. This study is a qualitative assessment and contextualisation of historical documents. Its main sources are archival and are for the most part unknown to historians. The article also offers intellectual and historical context that is drawn from leading historical and sociological analyses. Keeley's addiction cure was dismissed as quackery because it failed to meet the changing standards of late-nineteenth century professional medicine. This begs us to consider contextual issues in any assertion of the viability of addiction therapeutics, in the present as well the past. Keeley's near erasure from the historical record was a consequence of a broader, late-nineteenth century medical power struggle that took precedence over the testimony of tens of thousands of satisfied patients who claimed that Keeley's cure worked. Context matters in the assessment of the viability of theories of addiction from the past but also from the present. Historians and social scientists are well placed to make those assessments. This article is protected by copyright. All rights reserved.

  12. Stability and Optimal Harvesting of Modified Leslie-Gower Predator-Prey Model

    Science.gov (United States)

    Toaha, S.; Azis, M. I.

    2018-03-01

    This paper studies a modified of dynamics of Leslie-Gower predator-prey population model. The model is stated as a system of first order differential equations. The model consists of one predator and one prey. The Holling type II as a predation function is considered in this model. The predator and prey populations are assumed to be beneficial and then the two populations are harvested with constant efforts. Existence and stability of the interior equilibrium point are analysed. Linearization method is used to get the linearized model and the eigenvalue is used to justify the stability of the interior equilibrium point. From the analyses, we show that under a certain condition the interior equilibrium point exists and is locally asymptotically stable. For the model with constant efforts of harvesting, cost function, revenue function, and profit function are considered. The stable interior equilibrium point is then related to the maximum profit problem as well as net present value of revenues problem. We show that there exists a certain value of the efforts that maximizes the profit function and net present value of revenues while the interior equilibrium point remains stable. This means that the populations can live in coexistence for a long time and also maximize the benefit even though the populations are harvested with constant efforts.

  13. Condition based maintenance pilot projects at Pickering ND

    International Nuclear Information System (INIS)

    Zemdegs, R.T.

    1995-01-01

    Ontario Hydro has recognized that the approaches to maintenance have undergone significant changes to the past decades. The traditional break down maintenance approach has been replaced by preventative maintenance and more recently, by condition based maintenance. The nuclear plants of Ontario Hydro have evaluated on a number of alternative programs to improve their maintenance effectiveness and to reduce costs, including Reliability Centred Maintenance (RCM), call-up review, component-based PM programs, analysis of failure history and so on. Pickering ND (nuclear division) and Ontario Hydro's Nuclear Technologies Services Division, have embarked on a Condition Based Maintenance pilot project to address the above issues as a breakthrough solution for smarter maintenance. The Condition Based Maintenance pilot project will demonstrate an end-to-end process utilizing a Reliability Centred Maintenance structured approach to re-engineer and redefine the existing maintenance programs. The project emphasizes on-condition maintenance where justified, and utilizes an information management tool to provide the required records keeping and analysis infrastructure. This paper briefly describes the planned maintenance model at Pickering ND used to guide the CBM pilot, and an overview of the methodology used to develop on-condition equipment indicators as part of a re-engineered maintenance plan

  14. Numerical Study of a High Head Francis Turbine with Measurements from the Francis-99 Project

    International Nuclear Information System (INIS)

    Wallimann, H; Neubauer, R

    2015-01-01

    For the Francis-99 project initiated by the Norwegian University of Science and Technology (NTNU, Norway) and the Luleå University of Technology (LTU, Sweden) numerical flow simulation has been performed and the results compared to experimentally obtained data. The full machine including spiral casing, stay vanes, guide vanes, runner and draft tube was simulated transient for three operating points defined by the Francis-99 organisers. Two sets of results were created with differing time steps. Additionally, a reduced domain was simulated in a stationary manner to create a complete cut along constant prototype head and constant prototype discharge. The efficiency values and shape of the curves have been investigated and compared to the experimental data. Special attention has been given to rotor stator interaction (RSI). Signals from several probes and their counterpart in the simulation have been processed to evaluate the pressure fluctuations occurring due to the RSI. The direct comparison of the hydraulic efficiency obtained by the full machine simulation compared to the experimental data showed no improvement when using a 1° time step compared to a coarser 2° time step. At the BEP the 2° time step even showed a slightly better result with an absolute deviation 1.08% compared with 1.24% for the 1° time step. At the other two operating points the simulation results were practically identical but fell short of predicting the measured values. The RSI evaluation was done using the results of the 2° time step simulation, which proved to be an adequate setting to reproduce pressure signals with peaks at the correct frequencies. The simulation results showed the highest amplitudes in the vaneless space at the BEP operating point at a location different from the probe measurements available. This implies that not only the radial distance, but the shape of the vaneless space influences the RSI

  15. On Francis Crick, the genetic code, and a clever kid.

    Science.gov (United States)

    Goldstein, Bob

    2018-04-02

    A few years ago, Francis Crick's son told me a story that I can't get out of my mind. I had contacted Michael Crick by email while digging through the background of the researchers who had cracked the genetic code in the 1960s. Francis had died in 2004, and I was contacting some of the people who knew him when he was struggling to decipher the code. Francis didn't appear to struggle often - he is known mostly for his successes - and, as it turns out, this one well-known struggle may have had a clue sitting just barely out of sight. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Leptospira Exposure and Waste Pickers: A Case-Control Seroprevalence Study in Durango, Mexico.

    Science.gov (United States)

    Alvarado-Esquivel, Cosme; Hernandez-Tinoco, Jesus; Sanchez-Anguiano, Luis Francisco; Ramos-Nevarez, Agar; Cerrillo-Soto, Sandra Margarita; Guido-Arreola, Carlos Alberto

    2015-08-01

    Infection with Leptospira may occur by contact with Leptospira-infected animals. Waste pickers are in contact with rodents and dogs while picking in the garbage. Whether waste pickers are at risk for Leptospira infection is largely unknown. This study was aimed to determine the association of Leptospira IgG seroprevalence with the occupation of waste picking, and to determine the epidemiological characteristics of the waste pickers with Leptospira exposure. Through a case-control study, we determined the seroprevalence of anti-Leptospira IgG antibodies in 90 waste pickers and 90 age- and gender-matched control subjects in Durango City, Mexico using an enzyme immunoassay. Data were analyzed by bivariate and multivariate analyses. The prevalence of anti-Leptospira IgG antibodies was similar in waste pickers (4/90: 4.4%) to that in control subjects (5/90: 5.6%) (P = 1.00). Bivariate analysis showed that Leptospira exposure in waste pickers was associated with increasing age (P = 0.009), no education (P = 0.008), and consumption of rat meat (P = 0.04). However, these associations were no longer found by multivariate analysis. Leptospira exposure in waste pickers was not associated with health status, duration in the activity, wearing hand gloves and facemasks, history of injuries with sharp material of the garbage, or contact with animals or soil. This is the first study about Leptospira exposure in waste pickers. Results suggest that waste pickers are not at increasing risk for Leptospira exposure in Durango City, Mexico. Further research with a larger sample size to elucidate the association of Leptospira exposure with waste picking activity is needed.

  17. Leptospira Exposure and Waste Pickers: A Case-Control Seroprevalence Study in Durango, Mexico

    Science.gov (United States)

    Alvarado-Esquivel, Cosme; Hernandez-Tinoco, Jesus; Sanchez-Anguiano, Luis Francisco; Ramos-Nevarez, Agar; Cerrillo-Soto, Sandra Margarita; Guido-Arreola, Carlos Alberto

    2015-01-01

    Background Infection with Leptospira may occur by contact with Leptospira-infected animals. Waste pickers are in contact with rodents and dogs while picking in the garbage. Whether waste pickers are at risk for Leptospira infection is largely unknown. This study was aimed to determine the association of Leptospira IgG seroprevalence with the occupation of waste picking, and to determine the epidemiological characteristics of the waste pickers with Leptospira exposure. Methods Through a case-control study, we determined the seroprevalence of anti-Leptospira IgG antibodies in 90 waste pickers and 90 age- and gender-matched control subjects in Durango City, Mexico using an enzyme immunoassay. Data were analyzed by bivariate and multivariate analyses. Results The prevalence of anti-Leptospira IgG antibodies was similar in waste pickers (4/90: 4.4%) to that in control subjects (5/90: 5.6%) (P = 1.00). Bivariate analysis showed that Leptospira exposure in waste pickers was associated with increasing age (P = 0.009), no education (P = 0.008), and consumption of rat meat (P = 0.04). However, these associations were no longer found by multivariate analysis. Leptospira exposure in waste pickers was not associated with health status, duration in the activity, wearing hand gloves and facemasks, history of injuries with sharp material of the garbage, or contact with animals or soil. Conclusions This is the first study about Leptospira exposure in waste pickers. Results suggest that waste pickers are not at increasing risk for Leptospira exposure in Durango City, Mexico. Further research with a larger sample size to elucidate the association of Leptospira exposure with waste picking activity is needed. PMID:26124911

  18. Verdade e método em Francis Bacon

    OpenAIRE

    Secco, Márcio

    2004-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Filosofia e Ciências Humanas. Programa de Pós-Graduação em Filosofia. Estudo sobre o método e o conceito de verdade defendido por Francis Bacon, sendo nossos principais objetivos nesse trabalho: a) esclarecer algumas questões relativas ao método baconiano, principalmente no que se refere ao uso de hipóteses; b) apresentar uma interpretação falibilista da teoria de Francis Bacon, mostrando que a verdade e a utilidade...

  19. Catharine Sedgwick’s Hope Leslie (1827 and the Revision of the Puritan Past

    Directory of Open Access Journals (Sweden)

    Teresa Requena Pelegrí

    2009-06-01

    Full Text Available Catharine Maria Sedgwick’s texts and achievement have been long overshadowed by the undisputed recognition of some of her male contemporaries. James Fenimore Cooper, Washington Irving or William Cullen Bryant have received all the credit for having shaped -and for many, created- U.S. literature. However, Sedgwick’s contribution to the development of a specific native tradition in American letters is undeniable. Long before Ralph Waldo Emerson’s call for a specifically national subject-matter, Sedgwick was consciously giving her texts an American perspective by combining the techniques used in sentimental fiction with the historical romance. Set in colonial times, Hope Leslie or Early Times in the Massachusetts (1827 constitutes one of Sedgwick’s poignant explorations of the Puritan past of the country and its interrelation with issues of gender and race. By fusing Puritan historical accounts with fiction, Sedgwick’s technique succeeds in foregrounding the partiality of historical accounts in opposition to their supposedly objective exposition of facts and in this way the text manages to challenge Puritan self-righteous historiography. Moreover, the use of the Puritan past as material for her fiction together with the inclusion of Native American characters makes Sedgwick an extremely interesting foil to other contemporaries such as Nathaniel Hawthorne or James Fenimore Cooper. This paper wishes to explore Sedgwick’s version of the Puritan presence in the American colonies and compare it with Nathaniel Hawthorne’s to demonstrate how the former made gender indistinguishable form the construction of a national narrative. The paper also tackles Sedgwick’s sexual and racial politics in her treatment of fully developed Native American characters thus constituting an enlightening counterpart to the stereotypical and reductive portrayal found in James Fenimore Cooper’s work.

  20. NUKAB system use with the PICKER DYNA CAMERA II

    International Nuclear Information System (INIS)

    Collet, H.; Faurous, P.; Lehn, A.; Suquet, P.

    Present-day data processing units connected to scintillation gamma cameras can make use of cabled programme or recorded programme systems. The NUKAB system calls on the latter technique. The central element of the data processing unit, connected to the PICKER DYNA CAMERA II output, consists of a DIGITAL PDP 8E computer with 12-bit technological words. The use of a 12-bit technological format restricts the possibilities of digitalisation, 64x64 images representing the practical limit. However the NUKAB system appears well suited to the processing of data from gamma cameras at present in service. The addition of output terminals of the tracing panel type should widen the possibilities of the system. It seems that the 64x64 format is not a handicap in view of the resolution power of the detectors [fr

  1. Tritium in groundwater investigation at the Pickering Nuclear Generating Station

    International Nuclear Information System (INIS)

    DeWilde, J.; Yu, L.; Wootton, R.; Belanger, D.; Hansen, K.; McGurk, E.; Teare, A.

    2001-01-01

    Ontario Power Generation Inc. (OPG) investigated tritium in groundwater at the Pickering Nuclear Generating Station (PNGS). The objectives of the study were to evaluate and define the extent of radionuclides, primarily tritium, in groundwater, investigate the causes or sources of contamination, determine impacts on the natural environment, and provide recommendations to prevent future discharges. This paper provides an overview of the investigations conducted in 1999 and 2000 to identity the extent of the tritium beneath the site and the potential sources of tritium released to the groundwater. The investigation and findings are summarized with a focus on unique aspects of the investigation, on lessons learned and benefits. Some of the investigative techniques discussed include process assessments, video inspections, hydrostatic and tracer tests, Helium 3 analysis for tritium age dating, deuterium and tritium in soil analysis. The investigative techniques have widespread applications to other nuclear generating stations. (author)

  2. Investigation of tritium in groundwater at Pickering NGS

    International Nuclear Information System (INIS)

    DeWilde, J.; Yu, L.; Belanger, D.; Wootton, R.; Hansen, K.; McGurk, E.; Teare, A.

    2001-01-01

    Ontario Power Generation Inc. (OPG) investigated tritium in groundwater at the Pickering Nuclear Generating Station (PNGS). The objectives of the study were to evaluate and define the extent of radio-nuclides, primarily tritium, in groundwater, investigate the causes or sources of contamination, determine impacts on the natural environment, and provide recommendations to prevent future discharges. This paper provides an overview of the investigations conducted in 1999 and 2000 to identify the extent of the tritium beneath the site and the potential sources of tritium released to the groundwater. The investigation and findings are summarized with a focus on unique aspects of the investigation, on lessons learned and benefits. Some of the investigative techniques discussed include process assessments, video inspections, hydrostatic and tracer tests, Helium 3 analysis for tritium age dating, deuterium and tritium in soil analysis. The investigative techniques have widespread applications to other nuclear generating stations. (author)

  3. Colloidal formulations for probiotics delivery and Pickering systems

    DEFF Research Database (Denmark)

    Yücel Falco, Cigdem

    countries. One emerging functional food area is the efficient delivery of health-promoting probiotics. Although much progress has already been made in the development and understanding of novel microencapsulation systems, maintaining viability during gastric passage and being effective at the target site...... is still an issue for probiotics. On the other hand, one of the foremost challenges in the production of physically stable foods during the defined shelf life is the identification of new food-grade ingredients. In this context, the replacement of classical emulsifiers with solid particles is one...... of the advancing food research areas, though the number of food-grade solid particles investigated is still insufficient. Edible probiotic strains can potentially be valorised as particles similar to micron-sized fat particles in Pickering systems such as ice cream due to their low calories and their availability...

  4. Development and characterization of novel antimicrobial bilayer films based on Polylactic acid (PLA)/Pickering emulsions.

    Science.gov (United States)

    Zhu, Jun-You; Tang, Chuan-He; Yin, Shou-Wei; Yang, Xiao-Quan

    2018-02-01

    Biodegradable food packaging is sustainable and has a great application prospect. PLA is a promising alternative for petroleum-derived polymers. However, PLA packaging suffers from poor barrier properties compared with petroleum-derived ones. To address this issue, we designed bilayer films based on PLA and Pickering emulsions. The formed bilayer films were compact and uniform and double layers were combined firmly. This strategy enhanced mechanical resistance, ductility and moisture barrier of Pickering emulsion films, and concomitantly enhanced the oxygen barrier for PLA films. Thymol loadings in Pickering emulsion layer endowed them with antimicrobial and antioxidant activity. The release profile of thymol was well fitted with Fick's second law. The antimicrobial activity of the films depended on film types, and Pickering emulsion layer presented larger inhibition zone than PLA layer, hinting that the films possessed directional releasing role. This study opens a promising route to fabricate bilayer architecture creating synergism of each layer. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Francis Bacon and the Historiography of Scientific Rhetoric.

    Science.gov (United States)

    Zappen, James P.

    1989-01-01

    Reviews three twentieth-century interpretations of Francis Bacon's science and rhetoric: positivistic science and the plain style; institutionalized science and its more highly figured style; and democratic science. Presents the author's own interpretation, and concludes that each interpretation reflects different perceptions of the good of the…

  6. 60 years ago, Francis Crick changed the logic of biology.

    Directory of Open Access Journals (Sweden)

    Matthew Cobb

    2017-09-01

    Full Text Available In September 1957, Francis Crick gave a lecture in which he outlined key ideas about gene function, in particular what he called the central dogma. These ideas still frame how we understand life. This essay explores the concepts he developed in this influential lecture, including his prediction that we would study evolution by comparing sequences.

  7. 60 years ago, Francis Crick changed the logic of biology

    Science.gov (United States)

    2017-01-01

    In September 1957, Francis Crick gave a lecture in which he outlined key ideas about gene function, in particular what he called the central dogma. These ideas still frame how we understand life. This essay explores the concepts he developed in this influential lecture, including his prediction that we would study evolution by comparing sequences. PMID:28922352

  8. Scientific Cousins: The Relationship between Charles Darwin and Francis Galton

    Science.gov (United States)

    Fancher, Raymond E.

    2009-01-01

    This article traces the personal as well as the intellectual and scientific relationship between Charles Darwin and his younger half-cousin Francis Galton. Although they had been on friendly terms as young men, and Darwin had in some ways been a role model for Galton, the two did not share major scientific interests until after the publication of…

  9. Master equation and runaway speed of the Francis turbine

    Science.gov (United States)

    Zhang, Zh.

    2018-04-01

    The master equation of the Francis turbine is derived based on the combination of the angular momentum (Euler) and the energy laws. It relates the geometrical design of the impeller and the regulation settings (guide vane angle and rotational speed) to the discharge and the power output. The master equation, thus, enables the complete characteristics of a given Francis turbine to be easily computed. While applying the energy law, both the shock loss at the impeller inlet and the swirling loss at the impeller exit are taken into account. These are main losses which occur at both the partial load and the overloads and, thus, dominantly influence the characteristics of the Francis turbine. They also totally govern the discharge of the water through the impeller when the impeller is found in the standstill. The computations have been performed for the discharge, the hydraulic torque and the hydraulic efficiency. They were also compared with the available measurements on a model turbine. Excellent agreement has been achieved. The computations also enable the runaway speed of the Francis turbine and the related discharge to be determined as a function of the setting angle of the guide vanes.

  10. Sunrayce 97 Continues Day 7 - Smith Center to St. Francis

    Science.gov (United States)

    Manager (202) 586-0713 St. Francis, Kan. -- It was a close race for the top three places on the 7th day of running great. It's a solid car. We may not have the fastest or most efficient vehicle in the race, but we withdraw from the race yesterday due to suspension problems. The team was presented an "Inspector's

  11. 60 years ago, Francis Crick changed the logic of biology.

    Science.gov (United States)

    Cobb, Matthew

    2017-09-01

    In September 1957, Francis Crick gave a lecture in which he outlined key ideas about gene function, in particular what he called the central dogma. These ideas still frame how we understand life. This essay explores the concepts he developed in this influential lecture, including his prediction that we would study evolution by comparing sequences.

  12. Newly discovered geological features and their potential impact on Darlington and Pickering

    International Nuclear Information System (INIS)

    Wallach, J.L.

    1990-01-01

    Newly available information reveals the presence of a prominent north-northeast oriented aeromagnetic lineament and east-northeast trending, linear patterns in young sediments on the bottom of Lake Ontario. The magnetic lineament, named the Niagara-Pickering Magnetic Lineament, passes practically beneath the Pickering Nuclear Generating Station (8x1600 MW reactors), and about 30 km west of the Darlington Nuclear Generating Station (4x2800 MW reactors). Magnetic data suggest that the Niagara-Pickering Magnetic Lineament may be the signature of a fault and may connect with the Akron Magnetic Boundary in Ohio, with which several earthquakes appear to be associated. Geological data lend support to the fault hypothesis. A north-northwest trending belt of earthquake epicenters, which includes the Lockport, NY earthquake (est M=5.0) and the Attica, NY earthquake (M=5.8), lies just east of, and parallels, the entire length of Georgian Bay en route to Attica, New York. The proximity and parallelism of the Georgian Bay Linear Zone to this belt of earthquake epicenters implies that the Georgian Bay Linear Zone may be tectonically active. The Georgian Bay Linear Zone and the Niagara-Pickering Magnetic Lineament appear to intersect very near Pickering and within about 30 km from Darlington. This, combined with evidence of high horizontal stresses in the area and the implication that both lineaments may be seismically active, suggests that many of the ingredients necessary for an earthquake of at least M=5.0 to M=6.25 exist near both Darlington and Pickering. Therefore, it is necessary that the Niagara-Pickering Magnetic Lineament, the Georgian Bay Linear Zone and the other newly discovered structural features be properly evaluated in order to determine whether or not the current Design Basis Seismic Ground Motions for Darlington and Pickering are adequate

  13. Leslie Marmon Silko’s “Lullaby”: The Power of Resistance and Healing Force to Cultural and Spiritual Genocide

    OpenAIRE

    Barrios Herrero, Olga

    2000-01-01

    [ES] Este ensayo muestra como el relato “Lullaby” de Leslie M. Silko despliega varios niveles de resistencia en defensa de la historia, tradición oral y mujeres nativoamericanas. La estructura circular narrativa de la historia es utilizada por Silko para reafirmar y recuperar la tradición oral de los Lagunas nativoamericanos. Y, al alegir a Ayah como el personal principal, una esposa y madre luchadora, la autora reclama laa tradición matriarcal de la comunidad nativoamericana en contraposició...

  14. Mixed methods in health sciences research: a practical primer [Leslie Curry and Marcella-Nunez Smith (Sage Publishing, 2015)

    OpenAIRE

    Nelson, David

    2016-01-01

    Written by internationally-recognised health research experts, Leslie Curry and Marcella Nunez-Smith, this book aims to show researchers and students in the health sciences how to design, conduct, review and use mixed methods. Given the increased use of mixed methods in the health sciences, this text is timely and unique in that it offers a discipline-specific focus that is both relevant and practical. The book has a logical structure and is broken down into four parts: (1) an overview of ...

  15. Major historical developments in the design of water wheels and Francis hydroturbines

    International Nuclear Information System (INIS)

    Lewis, B J; Cimbala, J M; Wouden, A M

    2014-01-01

    The first record of water wheels dates back to ancient Greece. Over the next several centuries the technology spread all over the world. The process of arriving at the design of the modern Francis runner lasted from 1848 to approximately 1920. Though the modern Francis runner has little resemblance to the original turbines designed by James B. Francis in 1848, it became know as the Francis turbine around 1920, in honor of his many contributions to hydraulic engineering analysis and design. The modern Francis turbine is the most widely used turbine design today, particularly for medium head and large flow rate situations, and can achieve over 95% efficiency

  16. Leslie Cemetery and Francisco distributary fluvial channels in the Petersburg Formation (Pennsylvanian) of Gibson County, Indiana, USA

    Energy Technology Data Exchange (ETDEWEB)

    Eggert, D L

    1984-01-01

    The Leslie Cemetery Channel is a small distributary fluvial channel that is partly contemporaneous with the Springfield Coal member of the Petersburg Formation (Pennsylvanian) and splits the seam into two seams. This channel is 1-6 miles (1.6-10 km) wide and extends 30 miles (48 km) in the subsurface. Overbank and channel fill deposits consisting of sandstone, siltstone, and mudstone split the coal into two seams up to 40-50 ft (12-15 m) apart in places. The lower seam is a low-sulphur coal. Adjacent to this channel is the unsplit coal, which is as much as 9 ft (3 m) thick. Beneath the Leslie Cemetery Channel and the Springfield coal is the slightly older Francisco Channel (new name), which is younger than the next lower coal. This channel is filled with a fining-upward sandstone as much as 75 ft (23 m) thick. The positions of these stacked channels were determined by the differential compaction of earlier sediments. 20 references.

  17. Francis Bacon: The Real's Brutality. The Figure and the Other

    Directory of Open Access Journals (Sweden)

    Guido Mannucci

    2014-03-01

    Full Text Available Getting in front of painting by Francis Bacon touches you deeply. I’m talking about aesthetics, sensations: resounding flow that strikes abruptly, making futile any search for meaning. Francis Bacon circumvents the figurative, the meaning, he aims to the figural: to feelings, not words. Beauty, in his paintings, shows itself in the peaceful union of the positive and of its contrary; if the negative wasn’t there, though, his paintings wouldn’t exude such a brutal sense of reality. This essay investigates the figure of Francis Bacon and the spectator – the Other – as he tries to confront the painting. Bacon will be analysed using a purely phenomenological approach, with references that range from Merleau-Ponty to Martin Heidegger; the meeting-collision between the spectator and the painting, instead, will be examined taking inspiration from the Winnicott’s thesis on the relationship between Bacon and mirrors in the painter’s childhood. In order to take distance from Winnicott’s psychoanalytical approach, this essay will focus on the relationship between spectator and painting from a more anthropological point of view. 

  18. Fragger: a protein fragment picker for structural queries.

    Science.gov (United States)

    Berenger, Francois; Simoncini, David; Voet, Arnout; Shrestha, Rojan; Zhang, Kam Y J

    2017-01-01

    Protein modeling and design activities often require querying the Protein Data Bank (PDB) with a structural fragment, possibly containing gaps. For some applications, it is preferable to work on a specific subset of the PDB or with unpublished structures. These requirements, along with specific user needs, motivated the creation of a new software to manage and query 3D protein fragments. Fragger is a protein fragment picker that allows protein fragment databases to be created and queried. All fragment lengths are supported and any set of PDB files can be used to create a database. Fragger can efficiently search a fragment database with a query fragment and a distance threshold. Matching fragments are ranked by distance to the query. The query fragment can have structural gaps and the allowed amino acid sequences matching a query can be constrained via a regular expression of one-letter amino acid codes. Fragger also incorporates a tool to compute the backbone RMSD of one versus many fragments in high throughput. Fragger should be useful for protein design, loop grafting and related structural bioinformatics tasks.

  19. A comparison of clinical vs subclinical skin pickers in Israel.

    Science.gov (United States)

    Keuthen, Nancy J; Curley, Erin E; Tung, Esther S; Ittah, Karen; Qasem, Atheer; Murad, Sari; Odlaug, Brian L; Leibovici, Vera

    2016-05-01

    Skin-picking disorder (SPD) was recognized as its own entity for the first time in DSM-5. The existing SPD literature is limited and, to date, no study has examined the differences between clinical and sub- clinical SPD. Identifying differences between these 2 groups may improve diagnostic accuracy, treatment, and prevention efforts. Israeli adults (N = 4,325) from 2 previous studies were examined for the presence of clinical and subclinical SPD. Individuals with clinical SPD (n = 150) vs subclinical SPD (n = 219) were compared on skin-picking characteristics, psychological phenomena, and clinical correlates. There were many similarities between clinical and subclinical skin pickers. Individuals with clinical SPD, however, had more severe skin picking, greater associated functional impairment, greater perceived stress, and greater depressive and obsessive-compulsive symptoms, and were also more likely to have a first-degree relative with SPD. This study suggests that although there are some similarities between clinical and subclinical SPD, there also are distinct differences in the clinical presentation. Understanding these differences may be an important factor in treatment and prevention planning.

  20. Laboratory testing and assessment of the Pickering PRD supporting frame

    International Nuclear Information System (INIS)

    Ghobarah, A.

    1995-05-01

    The objective of this study was to design and test reinforced concrete beam-column subassemblages representing the beam, column and joint of the Centre Pier (CP) support of the Pressure Relief Duct (PRD) at the Pickering A Nuclear Generating Station. The testing program was expected to establish the failure mode of the subassemblage and to compare the performance of the existing CP with a specimen detailed in accordance with current code provisions. A one-third scale specimen of the beam-column subassemblage was designed and tested to failure when subjected to simulated seismic loads. A second specimen was constructed with shear reinforcement that was detailed according to the provisions of the CAN3-N287.3-M82 code. The second specimen was tested in the same manner as the first specimen. From the experimental data on the behaviour and mode of failure of the specimens, analytical evaluations were conducted to determine the inelastic nonlinear behaviour of the CP structural system when subjected to various levels of ground motion. (author). 11 refs., 3 tabs., 40 figs

  1. Water-in-oil Pickering emulsions stabilized by stearoylated microcrystalline cellulose.

    Science.gov (United States)

    Pang, Bo; Liu, Huan; Liu, Peiwen; Peng, Xinwen; Zhang, Kai

    2018-03-01

    Hydrophobic particles with static water contact angles larger than 90° are more like to stabilize W/O Pickering emulsions. In particular, high internal phase Pickering emulsions (HIPEs) are of great interest for diverse applications. However, W/O HIPEs have rarely been realized using sustainable biopolymers. Herein, we used stearoylated microcrystalline cellulose (SMCC) to stabilize W/O Pickering emulsions and especially, W/O HIPEs. Moreover, these W/O HIPEs can be further used as platforms for the preparation of porous materials, such as porous foams. Stearoylated microcrystalline cellulose (SMCC) was prepared by modifying MCC with stearoyl chloride under heterogeneous conditions. Using SMCC as emulsifiers, W/O medium and high internal phase Pickering emulsions (MIPEs and HIPEs) with various organic solvents as continuous phases were prepared using one-step and two-step methods, respectively. Polystyrene (PS) foams were prepared after polymerization of oil phase using HIPEs as templates and their oil/water separation capacity were studied. SMCC could efficiently stabilize W/O Pickering emulsions and HIPEs could only be prepared via the two-step method. The internal phase volume fraction of the SMCC-stabilized HIPEs reached as high as 89%. Diverse internal phase volume fractions led to distinct inner structures of foams with closed or open cells. These macroporous polystyrene (PS) foams demonstrated great potential for the effective absorption of organic solvents from underwater. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. DeepPicker: A deep learning approach for fully automated particle picking in cryo-EM.

    Science.gov (United States)

    Wang, Feng; Gong, Huichao; Liu, Gaochao; Li, Meijing; Yan, Chuangye; Xia, Tian; Li, Xueming; Zeng, Jianyang

    2016-09-01

    Particle picking is a time-consuming step in single-particle analysis and often requires significant interventions from users, which has become a bottleneck for future automated electron cryo-microscopy (cryo-EM). Here we report a deep learning framework, called DeepPicker, to address this problem and fill the current gaps toward a fully automated cryo-EM pipeline. DeepPicker employs a novel cross-molecule training strategy to capture common features of particles from previously-analyzed micrographs, and thus does not require any human intervention during particle picking. Tests on the recently-published cryo-EM data of three complexes have demonstrated that our deep learning based scheme can successfully accomplish the human-level particle picking process and identify a sufficient number of particles that are comparable to those picked manually by human experts. These results indicate that DeepPicker can provide a practically useful tool to significantly reduce the time and manual effort spent in single-particle analysis and thus greatly facilitate high-resolution cryo-EM structure determination. DeepPicker is released as an open-source program, which can be downloaded from https://github.com/nejyeah/DeepPicker-python. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Estimating the possible range of recycling rates achieved by dump waste pickers: The case of Bantar Gebang in Indonesia.

    Science.gov (United States)

    Sasaki, Shunsuke; Araki, Tetsuya

    2014-06-01

    This article presents informal recycling contributions made by scavengers in the surrounding area of Bantar Gebang final disposal site for municipal solid waste generated in Jakarta. Preliminary fieldwork was conducted through daily conversations with scavengers to identify recycling actors at the site, and then quantitative field surveys were conducted twice. The first survey (n = 504 households) covered 33% of all households in the area, and the second survey (n = 69 households) was conducted to quantify transactions of recyclables among scavengers. Mathematical equations were formulated with assumptions made to estimate the possible range of recycling rates achieved by dump waste pickers. Slightly over 60% of all respondents were involved in informal recycling and over 80% of heads of households were waste pickers, normally referred to as live-in waste pickers and live-out waste pickers at the site. The largest percentage of their spouses were family workers, followed by waste pickers and housewives. Over 95% of all households of respondents had at least one waste picker or one small boss who has a coequal status of a waste picker. Average weight of recyclables collected by waste pickers at the site was estimated to be approximately 100 kg day(-1) per household on the net weight basis. The recycling rate of solid wastes collected by all scavengers at the site was estimated to be in the range of 2.8-7.5% of all solid wastes transported to the site. © The Author(s) 2014.

  4. The Dissolution of the Mexican-American Border and Redefinition of Chicano/a /Mexican Identity in Leslie Marmon Silko's Almanac of the Dead

    DEFF Research Database (Denmark)

    Harding, David

    2006-01-01

    In Leslie Marmon Silko's Almanac of the Dead, notions of Mexican identity are deconstructed. This article analyzes how Silko, through a variety of characters and sub-plotlines, brings to the surface hidden tensions in the contsruction of Mexican identity through the melding of the sangre limpia...

  5. Exploiting the pliability and lateral mobility of Pickering emulsion for enhanced vaccination

    Science.gov (United States)

    Xia, Yufei; Wu, Jie; Wei, Wei; Du, Yiqun; Wan, Tao; Ma, Xiaowei; An, Wenqi; Guo, Aiying; Miao, Chunyu; Yue, Hua; Li, Shuoguo; Cao, Xuetao; Su, Zhiguo; Ma, Guanghui

    2018-02-01

    A major challenge in vaccine formulations is the stimulation of both the humoral and cellular immune response for well-defined antigens with high efficacy and safety. Adjuvant research has focused on developing particulate carriers to model the sizes, shapes and compositions of microbes or diseased cells, but not antigen fluidity and pliability. Here, we develop Pickering emulsions--that is, particle-stabilized emulsions that retain the force-dependent deformability and lateral mobility of presented antigens while displaying high biosafety and antigen-loading capabilities. Compared with solid particles and conventional surfactant-stabilized emulsions, the optimized Pickering emulsions enhance the recruitment, antigen uptake and activation of antigen-presenting cells, potently stimulating both humoral and cellular adaptive responses, and thus increasing the survival of mice upon lethal challenge. The pliability and lateral mobility of antigen-loaded Pickering emulsions may provide a facile, effective, safe and broadly applicable strategy to enhance adaptive immunity against infections and diseases.

  6. Tailoring the Wettability of Colloidal Particles for Pickering Emulsions via Surface Modification and Roughness

    Directory of Open Access Journals (Sweden)

    Meina Xiao

    2018-06-01

    Full Text Available Pickering emulsions are water or oil droplets that are stabilized by colloidal particles and have been intensely studied since the late 90s. The surfactant-free nature of these emulsions has little adverse effects such as irritancy and contamination of environment and typically exhibit enhanced stability compared to surfactant-stabilized emulsions. Therefore, they offer promising applications in cosmetics, food science, controlled release, and the manufacturing of microcapsules and porous materials. The wettability of the colloidal particles is the main parameter determining the formation and stability of Pickering emulsions. Tailoring the wettability by surface chemistry or surface roughness offers considerable scope for the design of a variety of hybrid nanoparticles that may serve as novel efficient Pickering emulsion stabilizers. In this review, we will discuss the recent advances in the development of surface modification of nanoparticles.

  7. The One-Step Pickering Emulsion Polymerization Route for Synthesizing Organic-Inorganic Nanocomposite Particles

    Directory of Open Access Journals (Sweden)

    Kaushal Rege

    2010-02-01

    Full Text Available Polystyrene-silica core-shell nanocomposite particles are successfully prepared via one-step Pickering emulsion polymerization. Possible mechanisms of Pickering emulsion polymerization are addressed in the synthesis of polystyrene-silica nanocomposite particles using 2,2-azobis(2-methyl-N-(2-hydroxyethylpropionamide (VA-086 and potassium persulfate (KPS as the initiator. Motivated by potential applications of “smart” composite particles in controlled drug delivery, the one-step Pickering emulsion polymerization route is further applied to synthesize polystyrene/poly(N-isopropylacrylamide (PNIPAAm-silica core-shell nanoparticles with N-isopropylacrylamide incorporated into the core as a co-monomer. The polystyrene/PNIPAAm-silica composite nanoparticles are temperature sensitive and can be taken up by human prostate cancer (PC3-PSMA cells.

  8. Pickering interfacial catalysis for biphasic systems: from emulsion design to green reactions.

    Science.gov (United States)

    Pera-Titus, Marc; Leclercq, Loïc; Clacens, Jean-Marc; De Campo, Floryan; Nardello-Rataj, Véronique

    2015-02-09

    Pickering emulsions are surfactant-free dispersions of two immiscible fluids that are kinetically stabilized by colloidal particles. For ecological reasons, these systems have undergone a resurgence of interest to mitigate the use of synthetic surfactants and solvents. Moreover, the use of colloidal particles as stabilizers provides emulsions with original properties compared to surfactant-stabilized emulsions, microemulsions, and micellar systems. Despite these specific advantages, the application of Pickering emulsions to catalysis has been rarely explored. This Minireview describes very recent examples of hybrid and composite amphiphilic materials for the design of interfacial catalysts in Pickering emulsions with special emphasis on their assets and challenges for industrially relevant biphasic reactions in fine chemistry, biofuel upgrading, and depollution. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. AECB staff annual report of Pickering NGS for the year 1991

    International Nuclear Information System (INIS)

    1992-11-01

    The AECB Pickering project staff, in cooperation with AECB staff in Ottawa, monitor the operation of Pickering NGS-A units 1-4 and Pickering NGS-B units 5-8 to ensure that Ontario Hydro operates the station in compliance with the licensing and safety requirements of the Atomic Energy Control Board. This report presents the review of licensing issues and station performance during 1991. Improvement over 1990 station operation occurred in the following areas: availability of special safety systems; reduction of the station external dose; reorganization of station management to improve focus; station chemistry; housekeeping and material condition; fuel handling capability; training of operators and maintenance staff. However, little change occurred and improvement is still needed in the following: compliance with operating licence; system surveillance program; station maintenance; environmental qualification; radiation emergency response; fire and rescue emergency response; limited capability to predict and prevent equipment failures such as the boiler tube failure on unit 5. (L.L.)

  10. [On the problems of the evolutionary optimization of life history. II. To justification of optimization criterion for nonlinear Leslie model].

    Science.gov (United States)

    Pasekov, V P

    2013-03-01

    The paper considers the problems in the adaptive evolution of life-history traits for individuals in the nonlinear Leslie model of age-structured population. The possibility to predict adaptation results as the values of organism's traits (properties) that provide for the maximum of a certain function of traits (optimization criterion) is studied. An ideal criterion of this type is Darwinian fitness as a characteristic of success of an individual's life history. Criticism of the optimization approach is associated with the fact that it does not take into account the changes in the environmental conditions (in a broad sense) caused by evolution, thereby leading to losses in the adequacy of the criterion. In addition, the justification for this criterion under stationary conditions is not usually rigorous. It has been suggested to overcome these objections in terms of the adaptive dynamics theory using the concept of invasive fitness. The reasons are given that favor the application of the average number of offspring for an individual, R(L), as an optimization criterion in the nonlinear Leslie model. According to the theory of quantitative genetics, the selection for fertility (that is, for a set of correlated quantitative traits determined by both multiple loci and the environment) leads to an increase in R(L). In terms of adaptive dynamics, the maximum R(L) corresponds to the evolutionary stability and, in certain cases, convergent stability of the values for traits. The search for evolutionarily stable values on the background of limited resources for reproduction is a problem of linear programming.

  11. Analytical Diagnostics of Non-Optimal Use of Pesticides and Health Hazards for Vegetable Pickers

    International Nuclear Information System (INIS)

    Zafar, M.; Mehmood, T.; Baig, I. A.; Saboor, A.; Sadiq, S.; Mahmood, K.

    2016-01-01

    Economically pesticides are meant to control pests in the fields. Up to certain optimal use of a typical pesticide, it enhances the yield of crops and vegetables. But, eventually amplified use of pesticides results in contamination of environment (water, soil, and air) and increase the health cost of vegetable pickers. The purpose of this study is to estimate the excessive use of pesticides and economic cost of health hazards for the vegetable pickers in district Vehari. Data from 90 respondents were collected and analyzed. The most common health problems identified during the survey were headache, eye irritation, skin infection, cough and shortness of breath. Health cost consists of costs related to precautionary measure, medication, traveling, the opportunity cost of attended persons and productivity loss. The mean health cost of vegetable pickers in the study area was about Rs. 385 per picker per year. Health cost model was used to measure the health cost of vegetable pickers. The regression results showed that pesticides were being applied non-optimally in the study area i.e., number of pesticide applications for vegetables (7-31) were substantially higher than the recommended dose. Health cost function was significantly different from zero as indicated by F-stat (32.18) and it is also supported by R/sup 2/ that about 70 percent variation in health cost is explained by medication accompanied by productivity loss (Rs. 223), precautionary measure (Rs. 134), attended person cost (Rs. 14) and traveling expenditures (Rs. 16). Hence, strict legislation is required to overcome the availability of hazardous pesticides and to keep the vegetable pickers aware of the optimal use of pesticides through appropriate extension services. (author)

  12. Multi-Unit Aspects of the Pickering Generating Station

    Energy Technology Data Exchange (ETDEWEB)

    Morison, W. G. [Atomic Energy of Canada Ltd, Sheridan Park, ON (Canada)

    1968-04-15

    The Pickering nuclear generating station is located on the north shore of Lake Ontario, about 20 miles east of the city of Toronto, Canada. The station has been planned and laid out on an eight-unit station, four units of which have now been authorized for construction. Each of these four units consists of a single heavy-water moderated and cooled CANDU-type reactor and auxiliaries coupled to a single tandem compound turbine generator with a net output of approximately 500 MW(e). The units are identical and are scheduled to come into operation at intervals of one year from 1970 to 1973. The station has been planned with central facilities for: administration maintenance laboratories, stores, change rooms, decontamination and waste management services. A common control centre, cooling water intake and discharge system, and spent fuel storage bay for four units has been arranged. A feature of the multi-unit station is a common containment system. Cost savings in building a number of identical units on the same site result from a single exclusion area, shared engineering costs, equipment purchase contracts for four identical components, and efficient use of construction plant. Operating cost savings are anticipated in the use of a common operating and maintenance staff and spare parts inventory. The plant has been arranged to minimize problems of operating, commissioning and constructing units at the same time on the same site. The layout and construction sequence have been arranged so that the first unit can be commissioned and operated with little or no interference from the construction forces working on succeeding units. During the construction phase barriers will be erected in the common control centre between operating control equipment and that being installed. Operations and construction personnel will enter the plant by separate routes and work in areas separated by physical barriers. (author)

  13. Modulation of Cyclodextrin Particle Amphiphilic Properties to Stabilize Pickering Emulsion.

    Science.gov (United States)

    Xi, Yongkang; Luo, Zhigang; Lu, Xuanxuan; Peng, Xichun

    2018-01-10

    Cyclodextrins have been proven to form complexes with linear oil molecules and stabilize emulsions. Amphiphilic properties of cyclodextrin particles were modulated through esterification reaction between β-cyclodextrin (β-CD) and octadecenyl succinic anhydride (ODSA) under alkaline conditions. ODS-β-CD particles with degree of substitution (DS) of 0.003, 0.011, and 0.019 were obtained. The introduced hydrophobic long chain that was linked within β-CD cavity led to the change of ODS-β-CD in terms of morphological structure, surface charge density, size, and contact angle, upon which the properties and stability of the emulsions stabilized by ODS-β-CD were highly dependent. The average diameter of ODS-β-CD particles ranged from 449 to 1484 nm. With the DS increased from 0.003 to 0.019, the contact angle and absolute zeta potential value of these ODS-β-CD particles improved from 25.7° to 47.3° and 48.1 to 62.8 mV, respectively. The cage structure of β-CD crystals was transformed to channel structure, then further to amorphous structure after introduction of the octadecenyl succinylation chain. ODS-β-CD particles exhibited higher emulsifying ability compared to β-CD. The resulting Pickering emulsions formed by ODS-β-CD particles were more stable during storage. This study investigates the ability of these ODS-β-CD particles to stabilize oil-in-water emulsions with respect to their amphiphilic character and structural properties.

  14. Aquivion Perfluorosulfonic Superacid as an Efficient Pickering Interfacial Catalyst for the Hydrolysis of Triglycerides.

    Science.gov (United States)

    Shi, Hui; Fan, Zhaoyu; Hong, Bing; Pera-Titus, Marc

    2017-09-11

    Rational design of the surface properties of heterogeneous catalysts can boost the interfacial activity in biphasic reactions through the generation of Pickering emulsions. This concept, termed Pickering interfacial catalysis (PIC), has shown promising credentials in acid-catalyzed transesterification, ester hydrolysis, acetalization, etherification, and alkylation reactions. PIC has now been applied to the efficient, solvent-free hydrolysis of the triglyceride glyceryl trilaurate to lauric acid, catalyzed by Aquivion perfluorosulfonic superacid at mild conditions (100 °C and ambient pressure). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Bruce used fuel dry storage project evolution from Pickering to Bruce

    International Nuclear Information System (INIS)

    Young, R.E.

    1996-01-01

    Additional fuel storage capacity is required at Bruce Nuclear Generating Station, which otherwise would soon fill up all its pool storage capacity. The recommended option was to use a dry storage container similar to that at Pickering. The changes made to the Pickering type of container included: fuel to be stored in trays; the container's capacity increased to 600 bundles; the container's lid to be changed to a metal one; the single concrete lid to be changed to a double metal lid system; the container not to be transportable; the container would be dry-loaded. 7 figs

  16. Bruce used fuel dry storage project evolution from Pickering to Bruce

    Energy Technology Data Exchange (ETDEWEB)

    Young, R E [Ontario Hydro, Tiverton, ON (Canada). Bruce Nuclear Generating Station-A

    1997-12-31

    Additional fuel storage capacity is required at Bruce Nuclear Generating Station, which otherwise would soon fill up all its pool storage capacity. The recommended option was to use a dry storage container similar to that at Pickering. The changes made to the Pickering type of container included: fuel to be stored in trays; the container`s capacity increased to 600 bundles; the container`s lid to be changed to a metal one; the single concrete lid to be changed to a double metal lid system; the container not to be transportable; the container would be dry-loaded. 7 figs.

  17. Cost of enlarged operating zone for an existing Francis runner

    Science.gov (United States)

    Monette, Christine; Marmont, Hugues; Chamberland-Lauzon, Joël; Skagerstrand, Anders; Coutu, André; Carlevi, Jens

    2016-11-01

    Traditionally, hydro power plants have been operated close to best efficiency point, the more stable operating condition for which they have been designed. However, because of changes in the electricity market, many hydro power plants operators wish to operate their machines differently to fulfil those new market needs. New operating conditions can include whole range operation, many start/stops, extensive low load operation, synchronous condenser mode and power/frequency regulation. Many of these new operating conditions may impose more severe fatigue damage than the traditional base load operation close to best efficiency point. Under these conditions, the fatigue life of the runner may be significantly reduced and reparation or replacement cost might occur sooner than expected. In order to design reliable Francis runners for those new challenging operating scenarios, Andritz Hydro has developed various proprietary tools and design rules. These are used within Andritz Hydro to design mechanically robust Francis runners for the operating scenarios fulfilling customer's specifications. To estimate residual life under different operating scenarios of an existing runner designed years ago for best efficiency base load operation, Andritz Hydro's design rules and tools would necessarily lead to conservative results. While the geometry of a new runner can be modified to fulfil all conservative mechanical design rules, the predicted fatigue life of an existing runner under off-design operating conditions may appear rather short because of the conservative safety factor included in the calculations. The most precise and reliable way to calculate residual life of an existing runner under different operating scenarios is to perform a strain gauge measurement campaign on the runner. This paper presents the runner strain gage measurement campaign of a mid-head Francis turbine over all the operating conditions available during the test, the analysis of the measurement signals

  18. Design of large Francis turbine using optimal methods

    Science.gov (United States)

    Flores, E.; Bornard, L.; Tomas, L.; Liu, J.; Couston, M.

    2012-11-01

    Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China -32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

  19. Design of large Francis turbine using optimal methods

    International Nuclear Information System (INIS)

    Flores, E; Bornard, L; Tomas, L; Couston, M; Liu, J

    2012-01-01

    Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China −32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

  20. Transient CFD simulation of a Francis turbine startup

    International Nuclear Information System (INIS)

    Nicolle, J; Morissette, J F; Giroux, A M

    2012-01-01

    To assess the life expectancy of hydraulic turbines, it is essential to obtain the loading on the blades, especially during transient operations known to be the most damaging. This paper presents a simplified CFD setup to model the startup phase of a Francis turbine while it goes from rest to speed no-load condition. The fluid domain included one distributor sector coupled with one runner passage. The guide vane motion and change in the angular velocity were included in a commercial code with user functions. Comparisons between numerical results and measurements acquired on a full-size turbine showed that most of the flow physics occurring during startup were captured.

  1. Efficiency limit factor analysis for the Francis-99 hydraulic turbine

    Science.gov (United States)

    Zeng, Y.; Zhang, L. X.; Guo, J. P.; Guo, Y. K.; Pan, Q. L.; Qian, J.

    2017-01-01

    The energy loss in hydraulic turbine is the most direct factor that affects the efficiency of the hydraulic turbine. Based on the analysis theory of inner energy loss of hydraulic turbine, combining the measurement data of the Francis-99, this paper calculates characteristic parameters of inner energy loss of the hydraulic turbine, and establishes the calculation model of the hydraulic turbine power. Taken the start-up test conditions given by Francis-99 as case, characteristics of the inner energy of the hydraulic turbine in transient and transformation law are researched. Further, analyzing mechanical friction in hydraulic turbine, we think that main ingredients of mechanical friction loss is the rotation friction loss between rotating runner and water body, and defined as the inner mechanical friction loss. The calculation method of the inner mechanical friction loss is given roughly. Our purpose is that explore and research the method and way increasing transformation efficiency of water flow by means of analysis energy losses in hydraulic turbine.

  2. The green roof dilemma - discussion of Francis and Lorimer (2011).

    Science.gov (United States)

    Henry, Alexandre; Frascaria-Lacoste, Nathalie

    2012-08-15

    Urban ecosystems are the most complex mosaics of vegetative land cover that can be found. In a recent paper, Francis and Lorimer (2011) evaluated the reconciliation potential of living roofs and walls. For these authors, these two techniques for habitat improvement have strong potential for urban reconciliation ecology. However they have some ecological and societal limitations such as the physical extreme environmental characteristics, the monetary investment and the cultural perceptions of urban nature. We are interested in their results and support their conclusions. However, for a considerable time, green roofs have been designed to provide urban greenery for buildings and the green roof market has only focused on extensive roof at a restricted scale within cities. Thus, we have strong doubts about the relevance of their use as possible integrated elements of the network. Furthermore, without dynamic progress in research and the implementation of well-thought-out policies, what will be the real capital gain from green roofs with respect to land-use complementation in cities? If we agree with Francis and Lorimer (2011) considering that urban reconciliation ecology between nature and citizens is a current major challenge, then "adaptive collaborative management" is a fundamental requirement. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. LDA measurements in the Francis-99 draft tube cone

    International Nuclear Information System (INIS)

    Sundstrom, L R J; Amiri, K; Cervantes, M J; Bergan, C; Dahlhaug, O G

    2014-01-01

    Velocity measurements were performed in the draft tube cone of a 1:5.1 scaled model of the Tokke hydropower plant, Norway; also known as the Francis-99 model. Results from the laser Doppler anemometry measurements undertaken at three operating points will be used as validation data for an upcoming workshop on the state of the art of Francis turbine numerical simulation. With the turbine operating at the best efficiency point, a sensitivity analysis of the flow parameters head, flow rate and runner rotational speed shows that the effects on the dimensionless velocity profiles are small as long as n ED and Q ED are held constant. The results indicate a well-functioning turbine at the best efficiency point and high load. At the part load operating point, a vortex breakdown occurs which distorts the velocity profiles and significantly lowers the turbine's hydraulic efficiency. Frequency spectrums of each LDA signal at part load reveals a peak which is asynchronous to that of the runner angular speed. The peaks might be related to the precession of a rotating vortex rope but the characteristics of the LDA signals are different compared to previous studies involving rotating vortex ropes

  4. The Second Christ, Saint Francis of Assisi and ecological consciousness

    Directory of Open Access Journals (Sweden)

    Hendrik Viviers

    2014-01-01

    Full Text Available Even though the life stories of Jesus and the so-called second Christ, Francis of Assisi, incline to the fantastical, their value for a modern ecological consciousness is defendable. Behind Francis� personification of nature and his mystical experiences of nature lie an intuitive sense of interconnectedness and interdependence, of being fully part of the natural web of life (confirmed by empirical science. The same is true of the immanence of Jesus. Religious figures like Francis and Jesus can provide a sound moral attitude towards caring for the natural world, but attitudes need to be informed by scientific knowledge to act ecologically correct. A partnership between attitudes and knowledge hopefully contains good news for a sustainable �green� planet.Intradisciplinary and/or�interdisciplinary�implications: Ecological hermeneutics (part of liberation theology or hermeneutics challenges traditional theologies� often anthropocentric bias in the intra-disciplinary arena. It respects the interconnectedness or interdependence of human and non-human life, including the non-organic, empirically substantiated by natural science. This shared realisation allows for a fruitful inter-disciplinary discourse with science to address the global ecological crisis.

  5. Effect of Guide Vane Clearance Gap on Francis Turbine Performance

    Directory of Open Access Journals (Sweden)

    Ravi Koirala

    2016-04-01

    Full Text Available Francis turbine guide vanes have pivoted support with external control mechanism, for conversion of pressure to kinetic energy and to direct them to runner vanes. This movement along the support is dependent on variation of load and flow (operating conditions. Small clearance gaps between facing plates and the upper and lower guide vane tips are available to aid this movement, through which leakage flow occurs. This secondary flow disturbs the main flow stream, resulting performance loss. Additionally, these increased horseshoe vortex, in presence of sand, when crosses through the gaps, both the surfaces are eroded. This causes further serious effect on performance and structural property by increasing gaps. This paper discusses the observation of the severity in hydropower plants and effect of clearance gaps on general performance of the Francis turbine through computational methods. It also relates the primary result with the empirical relation for leakage flow prediction. Additionally, a possible method to computationally estimate thickness depletion has also been presented. With increasing clearance gap, leakage increases, which lowers energy conversion and turbine efficiency along with larger secondary vortex.

  6. Synthesis of Covalently Cross-Linked Colloidosomes from Peroxidized Pickering Emulsions

    Directory of Open Access Journals (Sweden)

    Nadiya Popadyuk

    2016-10-01

    Full Text Available A new approach to the formation of cross-linked colloidosomes was developed on the basis of Pickering emulsions that were stabilized exclusively by peroxidized colloidal particles. Free radical polymerization and a soft template technique were used to convert droplets of a Pickering emulsion into colloidosomes. The peroxidized latex particles were synthesized in the emulsion polymerization process using amphiphilic polyperoxide copolymers poly(2-tert-butylperoxy-2-methyl-5-hexen-3-ine-co-maleic acid (PM-1-MAc or poly[N-(tert-butylperoxymethylacrylamide]-co-maleic acid (PM-2-MAc, which were applied as both initiators and surfactants (inisurfs. The polymerization in the presence of the inisurfs results in latexes with a controllable amount of peroxide and carboxyl groups at the particle surface. Peroxidized polystyrene latex particles with a covalently grafted layer of inisurf PM-1-MAc or PM-2-MAc were used as Pickering stabilizers to form Pickering emulsions. A mixture of styrene and/or butyl acrylate with divinylbenzene and hexadecane was applied as a template for the synthesis of colloidosomes. Peroxidized latex particles located at the interface are involved in the radical reactions of colloidosomes formation. As a result, covalently cross-linked colloidosomes were obtained. It was demonstrated that the structure of the synthesized (using peroxidized latex particles colloidosomes depends on the amount of functional groups and pH during the synthesis. Therefore, the size and morphology of colloidosomes can be controlled by latex particle surface properties.

  7. Pickering emulsions stabilized by whey protein nanoparticles prepared by thermal cross-linking

    NARCIS (Netherlands)

    Wu, Jiande; Shi, Mengxuan; Li, Wei; Zhao, Luhai; Wang, Ze; Yan, Xinzhong; Norde, Willem; Li, Yuan

    2015-01-01

    A Pickering (o/w) emulsion was formed and stabilized by whey protein isolate nanoparticles (WPI NPs). Those WPI NPs were prepared by thermal cross-linking of denatured WPI proteins within w/o emulsion droplets at 80. °C for 15. min. During heating of w/o emulsions containing 10% (w/v) WPI

  8. Novel carboxymethyl cellulose-polyvinyl alcohol blend films stabilized by Pickering emulsion incorporation method.

    Science.gov (United States)

    Fasihi, Hadi; Fazilati, Mohammad; Hashemi, Mahdi; Noshirvani, Nooshin

    2017-07-01

    The aim of this study was to investigate the possibility of increasing the antimicrobial and antioxidant properties of biodegradable active films stabilized via Pickering emulsions. The blend films were prepared from carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA), emulsified with oleic acid (OL) and incorporated with rosemary essential oil (REO). Formation of Pickering emulsion was confirmed by scanning electron microscopy (SEM), optical microscopy, mean droplet size and emulsion stability. Morphological, optical, physical, mechanical, thermal, antifungal and antioxidant properties of the films incorporated with different concentrations of REO (0.5, 1.5 and 3%) were determined. The results showed an increase in UV absorbance and elongation at break but, a decrease in tensile strength and thermal stability of the films. Interestingly, films containing REO exhibited considerable antioxidant and antimicrobial properties. In vitro microbial tests exhibited 100% fungal inhibition against Penicillium digitatum in the films containing 3% REO. In addition, no fungal growth were observed after 60days of storage at 25°C in bread slices were stored with active films incorporated with 3% REO, could attributed to the slow and regular release of REO caused by Pickering emulsions. The results of this study suggest that Pickering emulsion is a very promising method, which significantly affects antioxidant and antimicrobial activities of the films. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Women cotton pickers perceptions about health hazards due to pesticide use in irrigated punjab

    International Nuclear Information System (INIS)

    Abbas, M.; Mehmood, I.; Bashir, A.; Hassan, S.

    2015-01-01

    In Pakistan, cotton crop has special importance from the perspective of largest employment generation both for males and females in the production and value chains. Cotton picking is primarily a female specific activity in all cropping zones of Pakistan. Women cotton pickers mostly belong to poor rural society involved in this labour force to feed their families. Cotton pickers in Pakistan face some serious health related problems due to heavy use of pesticides on cotton crop. The present study was designed to investigate the problem faced by women cotton pickers and their role in household decision making. Overall 150 women cotton pickers were interviewed from Bahawalnagar, Sahiwal and Vehari districts of cotton-wheat zone of the Punjab. Summary statistics of women cotton pickers' showed mean average age was 33 years and had 2.4 ears of formal schooling and 10 years of cotton picking experience. The main reasons for cotton picking reported were to reduce family financial burden (30%) followed by better access to food and resource (23%) and better education of children (21%). Majority of the respondents (97.33%) reported that the mode of payments of cotton picking was in cash and the most of the respondents (83.70%) reported that they got wages in time. Only few respondents (8.70%) were aware of health hazards due to pesticides and only 10% women wear protective clothes during cotton picking. Majority of the respondents (76%) wash their clothes after cotton picking whereas almost all the respondents wash their hand after cotton picking. The women cotton pickers faced health problem, tiredness (54.5%), mental disturbance (9.90%) and fatigue (8.00%). More than 58% women reported their involvement in household decision making regarding food and groceries while 30.6% women involved in decision about education of children. It is suggested that the female cotton pickers should be educated about the importance (in terms of disease treatment and long-run health costs

  10. Pressure tube replacement in Pickering NGS A units 1 and 2

    International Nuclear Information System (INIS)

    Irvine, H.S.; Bennett, E.J.; Talbot, K.H.

    1986-10-01

    Being able to technically and economically replace the most radioactive components (excluding the nuclear fuel) in operating reactors will help to ensure the ongoing acceptance of nuclear power as a viable energy source for the future. Ontario Hydro is well along the path to meeting the above objective for its CANDU-PHW reactors. Following the failure of a Zircaloy-II pressure tube in unit 2 of Pickering NGS A in August, 1983, Ontario Hydro has embarked on a program to replace all Zircaloy-II pressure tubes in units 1 and 2 at Pickering. This program integrates the in-house research, design, construction, and operating skills of a large utility (Ontario Hydro) with the skills of a national nuclear organization (Atomic Energy of Canada Limited) and the private engineering sector of the Canadian nuclear industry. The paper describes the background to the pressure tube failure in Pickering unit 2 and to the efforts incurred in understanding the failure mechanism and how similar failures are not expected for the zirconium-niobium pressure tube material used in all other large CANDU-PHW units after units 1 and 2 of Pickering NGS A. The tooling developed for the pressure tube replacement program is described as well as the organization to undertake the program in an operating nuclear station. The retubing of units 1 and 2 at Pickering NGS A is nearing a successful completion and shows the benefits of being able to integrate the various skills required for this success. Pressure tube replacement in a CANDU-PHW reactor is equivalent to replacement of the reactor vessel in a LWR. The fact that this replacement can be done economically and with acceptable radiation dose to workers augurs well for the continued viability of the use of nuclear energy for the benefit of mankind. (author)

  11. Preparation of Pickering emulsions through interfacial adsorption by soft cyclodextrin nanogels

    Directory of Open Access Journals (Sweden)

    Shintaro Kawano

    2015-11-01

    Full Text Available Background: Emulsions stabilized by colloidal particles are known as Pickering emulsions. To date, soft microgel particles as well as inorganic and organic particles have been utilized as Pickering emulsifiers. Although cyclodextrin (CD works as an attractive emulsion stabilizer through the formation of a CD–oil complex at the oil–water interface, a high concentration of CD is normally required. Our research focuses on an effective Pickering emulsifier based on a soft colloidal CD polymer (CD nanogel with a unique surface-active property.Results: CD nanogels were prepared by crosslinking heptakis(2,6-di-O-methyl-β-cyclodextrin with phenyl diisocyanate and subsequent immersion of the resulting polymer in water. A dynamic light scattering study shows that primary CD nanogels with 30–50 nm diameter assemble into larger CD nanogels with 120 nm diameter by an increase in the concentration of CD nanogel from 0.01 to 0.1 wt %. The CD nanogel has a surface-active property at the air–water interface, which reduces the surface tension of water. The CD nanogel works as an effective Pickering emulsion stabilizer even at a low concentration (0.1 wt %, forming stable oil-in-water emulsions through interfacial adsorption by the CD nanogels.Conclusion: Soft CD nanogel particles adsorb at the oil–water interface with an effective coverage by forming a strong interconnected network and form a stable Pickering emulsion. The adsorption property of CD nanogels on the droplet surface has great potential to become new microcapsule building blocks with porous surfaces. These microcapsules may act as stimuli-responsive nanocarriers and nanocontainers.

  12. 7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

  13. “There is nothing better than a theory”: A few remarks on the theoretical practice of contemporary avantgarde women writers (Lyn Hejinian, Leslie Scalapino, Carla Harryman)

    OpenAIRE

    Małgorzata Myk

    2013-01-01

    The essay discusses theoretical practices of three major Americanexperimental women writers associated with L=A=N=G=U=A=G=E poets LynHejinian, Leslie Scalapino, and Carla Harryman, who played a crucial role in shapingthe present-day critical and theoretical literary debate regarding the status of formallyradical literature engaged in questions of feminist epistemology and written bywomen. Devoted to language and its ideological dimension, their work is based ona wager that poetic practice is ...

  14. The Female Population Growth Projection Year 2021 in Trenggalek Regency by Leslie Matrix Model on the Birth Rate and Life Expectancy

    Directory of Open Access Journals (Sweden)

    Dewi Anggreini

    2017-10-01

    Full Text Available This research aims to determine the number of female residents in Trenggalek Regency in 2021 based on data on birth rate and life expectancy. The use of eigenvalues and eigenvectors aims to determine the dividing age distribution by Leslie matrix model. The eigenvectors are used to determine the number of female populations of each age interval, while the eigenvalues are used to determine population growth rates. The research method used is to determine the subject of research. The next stage is to collect research data, then analyze the data and last draw conclusions. The research data is obtained from BPS Kabupaten Trenggalek and BPS East Java Province that is data of woman population from year 2010-2015. The result of this research using Leslie matrix model for female population in Trenggalek Regency that is discrete model. The discrete model is divided into fourteen age intervals constructed using the birthrate and life expectancy. The conclusions of the study showed that the number of female population in Trenggalek Regency tended to increase with positive eigen value greater than one. In other words, the growth rate of female population in Trenggalek Regency tends to be positive. The success of Leslie's matrix model is the application of case studies in predicting the number of female populations in Trenggalek District by 2021 using the MAPLE 16 Program.

  15. Francis Bacon: constructing natural histories of the invisible.

    Science.gov (United States)

    Rusu, Doina-Cristina

    2012-01-01

    The natural histories contained in Francis Bacon's Historia naturalis et experimentalis seem to differ from the model presented in De augmentis scientiarum and the Descriptio globi intellectualis in that they are focused on the defining properties of matter, its primary schematisms and the spirits. In this respect, they are highly speculative. In this paper I aim to describe the Historia naturalis et experimentalis as a text about matter theory, the histories of which are ascending from what is most evident to the senses to what is least accessible to them. Moreover, the Latin natural histories are parts of a methodological procedure in which the provisional rules and axioms obtained in one history can be used as theoretical assumptions for another history, thereby permitting one to delve ever more profoundly into the structure of nature.

  16. The "Visual Shock" of Francis Bacon: an essay in neuroesthetics.

    Science.gov (United States)

    Zeki, Semir; Ishizu, Tomohiro

    2013-01-01

    In this paper we discuss the work of Francis Bacon in the context of his declared aim of giving a "visual shock."We explore what this means in terms of brain activity and what insights into the brain's visual perceptive system his work gives. We do so especially with reference to the representation of faces and bodies in the human visual brain. We discuss the evidence that shows that both these categories of stimuli have a very privileged status in visual perception, compared to the perception of other stimuli, including man-made artifacts such as houses, chairs, and cars. We show that viewing stimuli that depart significantly from a normal representation of faces and bodies entails a significant difference in the pattern of brain activation. We argue that Bacon succeeded in delivering his "visual shock" because he subverted the normal neural representation of faces and bodies, without at the same time subverting the representation of man-made artifacts.

  17. Francis Bacon: teory, method and contributions to the education

    Directory of Open Access Journals (Sweden)

    Roberto Carlos Simões Galvão

    2007-04-01

    Full Text Available In the present article, we propose a brief analysis of Francis Bacon’s thought (1561-1626 and his contributions to the Education. With Bacon, the old religious or metaphysical character of knowledge was substituted by the objectivity of the experimental science, something unknown until then. The science started to represent a means in search of an end, i.e., man’s control over nature. The desire of Bacon to promote a reorganization of the power of the human knowledge, not based on the old scholastic knowledge, but in the new scientific knowledge, was shared by educators, philosophers and statesmen of his time. The role of the school would be to assure the dissemination of this new knowledge which, properly unified, would be within reach of all the children

  18. Experimental vibration level analysis of a Francis turbine

    International Nuclear Information System (INIS)

    Bucur, D M; Dunca, G; Calinoiu, C

    2012-01-01

    In this study the vibration level of a Francis turbine is investigated by experimental work in site. Measurements are carried out for different power output values, in order to highlight the influence of the operation regimes on the turbine behavior. The study focuses on the turbine shaft to identify the mechanical vibration sources and on the draft tube in order to identify the hydraulic vibration sources. Analyzing the vibration results, recommendations regarding the operation of the turbine, at partial load close to minimum values, in the middle of the operating domain or close to maximum values of electric power, can be made in order to keep relatively low levels of vibration. Finally, conclusions are drawn in order to present the real sources of the vibrations.

  19. Simulations of Steady Cavitating Flow in a Small Francis Turbine

    Directory of Open Access Journals (Sweden)

    Ahmed Laouari

    2016-01-01

    Full Text Available The turbulent flow through a small horizontal Francis turbine is solved by means of Ansys-CFX at different operating points, with the determination of the hydrodynamic performance and the best efficiency point. The flow structures at different regimes reveal a large flow eddy in the runner and a swirl in the draft tube. The use of the mixture model for the cavity/liquid two-phase flow allowed studying the influence of cavitation on the hydrodynamic performance and revealed cavitation pockets near the trailing edge of the runner and a cavitation vortex rope in the draft tube. By maintaining a constant dimensionless head and a distributor vane opening while gradually increasing the cavitation number, the output power and efficiency reached a critical point and then had begun to stabilize. The cavitation number corresponding to the safety margin of cavitation is also predicted for this hydraulic turbine.

  20. Prediction of dynamic blade loading of the Francis-99 turbine

    International Nuclear Information System (INIS)

    Nicolle, J; Cupillard, S

    2015-01-01

    CFD simulations focusing on capturing dynamic fluctuations of the flow for three operating points were performed for a scale model of a high head Francis turbine. A mesh sensitivity study showed an influence of the near wall resolution, consequently a low Reynolds mesh with a SST turbulence model was used. Rotor/stator fluctuations are well reproduced with the full turbine simulation at all operating points. Velocity contours and average velocity profiles from LDV measurements in the draft tube confirm that the flow physics is generally well reproduced. Simplified approaches such as profile transform and Fourier transform underestimated the measured fluctuations. As full turbine simulations were time-consuming, a simulation with only the draft tube was performed at part load to predict the fluctuations in the draft tube cone. The SAS-SST turbulence model was able to capture the vortex rope behavior

  1. A Study of Micro Finance: Special Reference to Female Waste Pickers in Pimpri Chinchwad Area in Pune

    OpenAIRE

    Hebalkar, Dr. Rashmi; Sharma, Meena Sunildutt

    2013-01-01

    Female waste pickers are the neglected section of urban women who are struggling to make ends meet, in an occupation which is hazardous for health, and are contributing to the welfare of society, without realizing it, through collecting waste and sending it forward for recycling. These women may be poorly educated but at least some of them have been unionized and their union attempts to improve their condition. Despite the existence of KKPKP union, there are female waste pickers who have not ...

  2. The interaction between popular economy, social movements and public policies: A case study of the waste pickers' movement

    OpenAIRE

    van Zeeland, Angelique J.W.M.

    2014-01-01

    This paper examines the challenges of expansion and sustainability of Social and Solidarity Economy (SSE). It focuses on the interaction between popular economy and SSE, and stresses the importance of collective action and public policies to enable the transition from the informal economy toward SSE. The main focus is on the waste pickers' movement. Experiences from Latin America, Asia and Africa show the possibilities of incorporating a significant contingent of informal waste pickers in sol...

  3. State of the art in numerical simulation of high head Francis turbines

    Directory of Open Access Journals (Sweden)

    Trivedi Chirag

    2016-01-01

    Full Text Available The Francis-99 test case consists in a high head Francis turbine model, which geometry together with meshes and detailed experimental measurements is freely available at www.francis-99.org. Three workshops were initially planned to exchange experience on numerical investigations of the test case concerning steady state operating conditions, transient operating conditions and fluid structure analysis. The first workshop was held in Trondheim, Norway in December 2014. Some results of the 14 contributions are presented. They are concerned with the influence of the near wall space discretization and turbulence modelling in order to capture hydraulic efficiency, torque, pressure and velocity with a good uncertainty at three operating conditions.

  4. Pulse picker for synchrotron radiation driven by a surface acoustic wave.

    Science.gov (United States)

    Vadilonga, Simone; Zizak, Ivo; Roshchupkin, Dmitry; Petsiuk, Andrei; Dolbnya, Igor; Sawhney, Kawal; Erko, Alexei

    2017-05-15

    A functional test for a pulse picker for synchrotron radiation was performed at Diamond Light Source. The purpose of a pulse picker is to select which pulse from the synchrotron hybrid-mode bunch pattern reaches the experiment. In the present work, the Bragg reflection on a Si/B4C multilayer was modified using surface acoustic wave (SAW) trains. Diffraction on the SAW alters the direction of the x rays and it can be used to modulate the intensity of the x rays that reach the experimental chamber. Using electronic modulation of the SAW amplitude, it is possible to obtain different scattering conditions for different x-ray pulses. To isolate the single bunch, the state of the SAW must be changed in the short time gap between the pulses. To achieve the necessary time resolution, the measurements have been performed in conical diffraction geometry. The achieved time resolution was 120 ns.

  5. Pickering NGS emergency water supply system emergency start flow simulation and experiment

    Energy Technology Data Exchange (ETDEWEB)

    Davidge, E.; Misra, A. [Ontario Power Generation Inc., Nuclear Safety Analysis & Technology Department, Toronto, Ontario (Canada)

    2012-07-01

    A proposed modification to the OPG Pickering Nuclear Generation Station Emergency Water Supply (EWS) system was analyzed using the Industry Standard Toolset code GOTHIC to determine the acceptability of the proposed system configuration during pump start-up. The new configuration of the system included a vertical dead-ended pipe, initially filled with air. The simulation demonstrated that no significant water hammer effects were predicted and tests performed with the new configuration confirmed the analysis results. (author)

  6. Assessment of ichthyoplankton entrainment at Pickering 'A' NGS using a pump/net in lake system

    International Nuclear Information System (INIS)

    McKinley, R.S.

    1985-03-01

    Annual entrainment at Pickering 'A' NGS was estimated for alewife as 13.6 X 10 6 larvae and 409 X 10 6 eggs. A substantial portion of eggs and larvae entering the intake were dead due to natural mortality (41%-81%) prior to entrainment. Viable eggs and larvae, immediately following entrainment showed mortalities of 54% and 44% respectively. The latent mortality of entrained eggs was 100% (48 h)

  7. Automatic pickers performances in the case of the Emilia sequence of May-June 2012.

    Science.gov (United States)

    Tiberi, Lara; Spallarossa, Daniele; Costa, Giovanni

    2013-04-01

    The automatic processing of seismic data, whether for real-time seismic warning system or to reprocessing large amount of seismic recordings, is increasingly being demanded by seismologists especially in case of emergency as for the Emilia sequence in may-june 2012. In this study is presented a comparison between the AutoPicker (DipTeRiS, University of Genova) a new method used for automatic accurate onset phase picking for both P and S wave arrival based on the Akaike's information criterion (AIC), a solid and tested picker as the STA/LTA in Antelope software and the manual pickings. In order to construct the database used for the relocation of Emilia sequence, the RAN strong motion database has been merged with the available velocity and acceleration data extracted from the EIDA database (European Integrated Data Archive) and velocity data recorded by the Southeastern Alps Integrated Network (DMG, OGS, ARSO and ZAMG). The fault system of the Emilia earthquake area is complex and it is not easy to assess which fault has moved. A precise localization of the sequence is essential. The manual pickings, the equivalent locations and the choice of the most appropriate velocity model ("Iside") used in this study are the results of a work done in collaboration with Università di Chieti and DPC, not described here. The main problem of the AutoPicker and Antelope software is to discriminate events that occur very close to each other in time. The best way to solve that issue is choosing the best setup of both techniques to minimize the problem. Then we would like to implement the AutoPicker technique developed by Prof. Spallarossa on the Antelope system routinely used by UTS-DMG for the real-time data analysis.

  8. Retrofit of AECL CAN6 seals into the Pickering shutdown cooling pumps

    International Nuclear Information System (INIS)

    Rhodes, D.; Metcalfe, R.; Brown, G.

    1997-01-01

    The existing mechanical seals in the shutdown cooling (SDC) pumps at the eight-unit Pickering Nuclear Generating Station have caused as least seven forced outages in the last fifteen years. The SDC pumps were originally intended to run only during shutdowns, mostly at low pressure, except for short periods during routine testing of SDC isolation valves while the plant is operating at full pressure to verify that the emergency core injection system is available. Unfortunately, in practice, some SDC pumps must be run much more frequently than this to prevent overheating or freezing of components in the system while the plant is at power. This more severe service has decreased seal lifetime from about 8000 running hours to about 3000 running hours. Rather than tackling the difficult task of eliminating on-power running of the pumps, Pickering decided to install a more robust seal design that could withstand this. Through the process of competitive tender, AECL's CAN6 seal was chosen. This seal has a successful history in similarly demanding conditions in boiling water reactors in the USA. To supplement this and demonstrate there would be no 'surprises,' a 2000-hour test program was conducted. Testing consisted of simulating all the expected conditions, plus some special tests under abnormal conditions. This has given assurance that the seal will operate reliably in the Pickering shutdown cooling pumps. (author)

  9. Some engineering aspects of the investigation into the cracking of pressure tubes in the Pickering reactors

    International Nuclear Information System (INIS)

    Ross-Ross, P.A.; Towgood, G.R.; Hunter, T.A.

    1976-01-01

    In August 1974, Pickering Unit 3 (514 MWe) was shutdown for a period of 8 months because of cracks in 17 of the 390 pressure tubes. The cracks were a result of incorrect installation procedures during construction. Improper positioning of the rolling tool used to join the Zr-2.5 wt% Nb pressure tube to the end fitting produced very high residual tensile stresses. High stresses in combination with periods with the tubes cold caused the cracking. Crack propagation was by fracture of hydrides which are brittle when cold. Subsequent investigation confirmed that properly rolled joints are not susceptible to such cracking. The resources of Canadian industry, Ontario Hydro and Atomic Energy of Canada were coordinated to find engineering solutions to the crack program. The defective tubes were removed from reactor, thoroughly examined to identify the cause of the cracks, and thoroughly tested to prove safety. Non-destructive techniques were quickly adopted for inspection of tubes in Pickering. Tools and procedures for retubing the 17 channels were prepared and Pickering Unit 3 was returned to service at the end of March 1975. (author)

  10. Retrofit of AECL CAN6 seals into the Pickering shutdown cooling pumps

    International Nuclear Information System (INIS)

    Rhodes, D.; Metcalfe, R.; Brown, G.; Kiameh, P.; Burchett, P.

    1997-01-01

    The existing mechanical seals in the shutdown cooling (SDC) pumps at the eight-unit Pickering Nuclear Generating Station have caused at least seven forced outages in the last fifteen years. The SDC pumps were originally intended to run only during shutdowns, mostly at low pressure, except for short periods during routine testing of SDC isolation valves while the plant is operating at full pressure to verify that the emergency core injection system is available. Unfortunately, in practice, some SDC pumps must be run much more frequently than this to prevent overheating or freezing of components in the system while the plant is at power. This more severe service has decreased seal lifetime from about 8000 running hours to about 3000 running hours. Rather than tackling the difficult task of eliminating on-power running of the pumps, Pickering decided to install a more robust seal design that could withstand this. Through the process of competitive tender, AECL's CAN6 seal was chosen. This seal has a successful history in similarly demanding conditions in boiling water reactors in the USA. To supplement this and demonstrate there would be no 'surprises,' a 2000-hour test program was conducted. Testing consisted of simulating all the expected conditions, plus some special tests under abnormal conditions. This has given assurance that the seal will operate reliably in the Pickering shutdown cooling pumps. (author)

  11. Reliability of the Francis Scale of Attitude Toward Christianity among 8-yr-olds.

    Science.gov (United States)

    Robbins, Mandy; Francis, Leslie J; Williams, Naomi

    2003-02-01

    The Francis Scale of Attitude Toward Christianity was completed by 78 8-yr.-olds (40 boys and 38 girls) whose data support reliability measured as the internal consistency of the scale for this young sample.

  12. The Power of the Word and the Mastery of Nature: Renaissance Magic and Francis Bacon

    Czech Academy of Sciences Publication Activity Database

    Špelda, Daniel

    19/43/, - (2005), s. 7-36. ISBN 80-7007-236-9. ISSN 0231-5955 Institutional research plan: CEZ:AV0Z90090514 Keywords : magic * renaissance philosophy * Francis Bacon Subject RIV: AA - Philosophy ; Religion

  13. Robust Finite-Time Terminal Sliding Mode Control for a Francis Hydroturbine Governing System

    OpenAIRE

    Fengjiao Wu; Junling Ding; Zhengzhong Wang

    2016-01-01

    The robust finite-time control for a Francis hydroturbine governing system is investigated in this paper. Firstly, the mathematical model of a Francis hydroturbine governing system is presented and the nonlinear vibration characteristics are analyzed. Then, on the basis of finite-time control theory and terminal sliding mode scheme, a new robust finite-time terminal sliding mode control method is proposed for nonlinear vibration control of the hydroturbine governing system. Furthermore, the d...

  14. The great war correspondent: Francis McCullagh, 1874–1956

    OpenAIRE

    Horgan, John

    2009-01-01

    Trotsky of Russia knows Francis McCullagh. So does President Calles of Mexico. Peter, the King of Serbia, was McCullagh’s friend. The headhunters of the upper Amazon list Francis McCullagh as one of their principal deities. The warring tribes of Morocco call him blood brother. A room is always ready for him in the imperial palace of Siam. The latchstrings of hundreds of Siberian peasant huts are out in anticipation of his coming.

  15. The Visual Shock of Francis Bacon: An essay in neuroesthetics

    Directory of Open Access Journals (Sweden)

    Semir eZeki

    2013-12-01

    Full Text Available In this paper we discuss the work of Francis Bacon in the context of his declared aim of giving a visual shock. We explore what this means in terms of brain activity and what insights into the brain’s visual perceptive system his work gives. We do so especially with reference to the representation of faces and bodies in the human visual brain. We discuss the evidence that shows that both these categories of stimuli have a very privileged status in visual perception, compared to the perception of other stimuli, including man-made artifacts such as houses, chairs and cars. We show that viewing face and house stimuli that depart significantly from a normal representation of faces and bodies entails a significant difference in the pattern of brain activation. We argue that Bacon succeeded in delivering his visual shock because he subverted the normal neural representation of faces and bodies, without at the same time subverting the representation of man-made artifacts.

  16. Civil history and poetry, certainty and truth in Francis Bacon

    Directory of Open Access Journals (Sweden)

    Silvia Manzo

    2015-02-01

    Full Text Available This article aims at studying key components of Francis Bacon’s theory of history and of his work as practitioner of civil history, particularly in regard to truth and certainty in historical narratives. It compares Bacon’s theories of history and poetry, and the way in which he conceives their relation to certainty, truth and fiction. It analyzes mainly two sorts of writings. On the one hand, it investigates the programmatic texts where Bacon’s views of history and poetry are developed. On the other hand, it examines the finished and unfinished civil histories written by Bacon as historian. In addition, the article evaluates Bacon’s stances against the background of Renaissance and early modern English historiography. It concludes that although history and poetry constitute separate branches in Bacon’s classification of learning, they share important elements, in keeping with the view of poetry maintained by his contemporary Philip Sidney. Thus, Bacon included fictional patterns in his historical narrative and distinguished certainties from conjectures in a particular way. This attitude towards civil history shows a strong contrast to Bacon’s methodology for natural histories, which, in order to reach certainty, staunchly recommends to exclude any fictional narrative in reporting the facts of nature.

  17. The medical philosophy of Francis Bacon (1561-1626).

    Science.gov (United States)

    Boss, J

    1978-01-01

    Francis Bacon's view of man is dualistic but, although he takes note of mental faculties, he makes the relation between mind and body, rather than the substance of mind, the basis for enquiry into mental processes and, more particularly, for the medically relevant study of mind. (He uses "mind" and "soul" as equivalent terms.) The healing of the body requires study of the body, and the ineffectiveness of physicians is due to their failure in this respect rather than to the body's complexity. To learn about the body requires clinical observation and recording, together with the comparison of bodies, experiments on living animals and attention to pathological changes. The aims of medicine should include not only the restoration of health but also the relief of suffering and they are not to be limited by putting aside a disease as incurable. To learn from treatment it must be fixed in its ordering with controlled and limited variation. Bacon has no separation of medicine from natural science; his philosophy of medicine is his general philosophy of the advancement of knowledge, but limited to a particular field of application. If medicine is separated from natural philosophy it is changed wholly or greatly into empiricism.

  18. Computation of Cavitating Flow in a Francis Hydroturbine

    Science.gov (United States)

    Leonard, Daniel; Lindau, Jay

    2013-11-01

    In an effort to improve cavitation characteristics at off-design conditions, a steady, periodic, multiphase, RANS CFD study of an actual Francis hydroturbine was conducted and compared to experimental results. It is well-known that operating hydroturbines at off-design conditions usually results in the formation of large-scale vaporous cavities. These cavities, and their subsequent collapse, reduce efficiency and cause damage and wear to surfaces. The conventional hydro community has expressed interest in increasing their turbine's operating ranges, improving their efficiencies, and reducing damage and wear to critical turbine components. In this work, mixing planes were used to couple rotating and stationary stages of the turbine which have non-multiple periodicity, and provide a coupled solution for the stay vanes, wicket gates, runner blades, and draft tube. The mixture approach is used to simulate the multiphase flow dynamics, and cavitation models were employed to govern the mass transfer between liquid and gas phases. The solution is compared with experimental results across a range of cavitation numbers which display all the major cavitation features in the machine. Unsteady computations are necessary to capture inherently unsteady cavitation phenomena, such as the precessing vortex rope, and the shedding of bubbles from the wicket gates and their subsequent impingement upon the leading edge of the runner blades. To display these features, preliminary unsteady simulations of the full machine are also presented.

  19. Complex dynamics of a stochastic discrete modified Leslie-Gower predator-prey model with Michaelis-Menten type prey harvesting

    Directory of Open Access Journals (Sweden)

    A. Elhassanein

    2014-06-01

    Full Text Available This paper introduced a stochastic discretized version of the modified Leslie-Gower predator-prey model with Michaelis-Menten type prey harvesting. The dynamical behavior of the proposed model was investigated. The existence and stability of the equilibria of the skeleton were studied. Numerical simulations were employed to show the model's complex dynamics by means of the largest Lyapunov exponents, bifurcations, time series diagrams and phase portraits. The effects of noise intensity on its dynamics and the intermittency phenomenon were also discussed via simulation.

  20. Tritium releases from the Pickering Nuclear Generating Station and birth defects and infant mortality in nearby communities 1971-1988

    International Nuclear Information System (INIS)

    Johnson, K.C.; Rouleau, J.

    1991-10-01

    This study was commissioned to examine whether there were elevated rates of stillbirth, birth defects, or death in the first year of life between 1971 and 1988 among offspring of residents of communities within a 25-kilometre radius of the Pickering Nuclear Generating Station. The study was also to investigate whether there were any statistical associations between the monthly airborne or waterborne tritium emissions from the Pickering Nuclear Generating Station and the rates of these reproductive outcomes. Overall analysis did not support a hypothesis of increased rates of stillbirths, neonatal mortality or infant mortality near the Pickering Nuclear Generating Station, or a hypothesis of increased birth prevalence of birth defects for 21 of 22 diagnostic categories. The prevalence of Down Syndrome was elevated in both Pickering and Ajax; however, there was no consistent pattern between tritium release levels and Down Syndrome prevalence, chance could not be ruled out for the associations between Down Syndrome and tritium releases or ground-monitored concentrations, the association was detected in an analysis where multiple testing was done which may turn up significant associations by change, and maternal residence at birth and early in pregnancy needs to be verified. The association between Down Syndrome and low-level radiation remains indeterminate when existing evidence from epidemiological studies is summed. The estimated radiation exposure from the nuclear plant for residents of Pickering and Ajax is lower by a factor of 100 than the normal natural background radiation. Further study is recommended. (21 tabs., 29 figs., 5 maps, 37 refs.)

  1. Study of the time effect on the strength of cell-cell adhesion force by a novel nano-picker

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Yajing, E-mail: shen@robo.mein.naogya-u.ac.jp [Dept. of Micro-Nano Systems Engineering, Nagoya University, Nagoya 464-8603 (Japan); Nakajima, Masahiro [Center for Micro-Nano Mechatronics, Nagoya University, Nagoya 464-8603 (Japan); Kojima, Seiji; Homma, Michio [Division of Biological Science, Nagoya University, Nagoya 464-8603 (Japan); Fukuda, Toshio [Dept. of Micro-Nano Systems Engineering, Nagoya University, Nagoya 464-8603 (Japan); Center for Micro-Nano Mechatronics, Nagoya University, Nagoya 464-8603 (Japan)

    2011-06-03

    Highlights: {yields} A nano-picker is developed for single cell adhesion force measurement. {yields} The adhesion of picker-cell has no influence to the cell-cell measurement result. {yields} Cell-cell adhesion force has a rise at the first few minutes and then becomes constant. -- Abstract: Cell's adhesion is important to cell's interaction and activates. In this paper, a novel method for cell-cell adhesion force measurement was proposed by using a nano-picker. The effect of the contact time on the cell-cell adhesion force was studied. The nano-picker was fabricated from an atomic force microscopy (AFM) cantilever by nano fabrication technique. The cell-cell adhesion force was measured based on the deflection of the nano-picker beam. The result suggests that the adhesion force between cells increased with the increasing of contact time at the first few minutes. After that, the force became constant. This measurement methodology was based on the nanorobotic manipulation system inside an environmental scanning electron microscope. It can realize both the observation and manipulation of a single cell at nanoscale. The quantitative and precise cell-cell adhesion force result can be obtained by this method. It would help us to understand the single cell interaction with time and would benefit the research in medical and biological fields potentially.

  2. Popmuusika / Leslie Laasner

    Index Scriptorium Estoniae

    Laasner, Leslie

    2006-01-01

    Uutest heliplaatidest "Bossa n' Stones", Anti-Flag "For Blood And Empire", Nightmares On Wax "In A Space Outta Sound", The Futureheads "New And Tributes", Madlib "The Beat Konducta", Live "Songs From Black Mountain"

  3. Turbulence modeling for Francis turbine water passages simulation

    International Nuclear Information System (INIS)

    Maruzewski, P; Munch, C; Mombelli, H P; Avellan, F; Hayashi, H; Yamaishi, K; Hashii, T; Sugow, Y

    2010-01-01

    The applications of Computational Fluid Dynamics, CFD, to hydraulic machines life require the ability to handle turbulent flows and to take into account the effects of turbulence on the mean flow. Nowadays, Direct Numerical Simulation, DNS, is still not a good candidate for hydraulic machines simulations due to an expensive computational time consuming. Large Eddy Simulation, LES, even, is of the same category of DNS, could be an alternative whereby only the small scale turbulent fluctuations are modeled and the larger scale fluctuations are computed directly. Nevertheless, the Reynolds-Averaged Navier-Stokes, RANS, model have become the widespread standard base for numerous hydraulic machine design procedures. However, for many applications involving wall-bounded flows and attached boundary layers, various hybrid combinations of LES and RANS are being considered, such as Detached Eddy Simulation, DES, whereby the RANS approximation is kept in the regions where the boundary layers are attached to the solid walls. Furthermore, the accuracy of CFD simulations is highly dependent on the grid quality, in terms of grid uniformity in complex configurations. Moreover any successful structured and unstructured CFD codes have to offer a wide range to the variety of classic RANS model to hybrid complex model. The aim of this study is to compare the behavior of turbulent simulations for both structured and unstructured grids topology with two different CFD codes which used the same Francis turbine. Hence, the study is intended to outline the encountered discrepancy for predicting the wake of turbine blades by using either the standard k-ε model, or the standard k-ε model or the SST shear stress model in a steady CFD simulation. Finally, comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements.

  4. Turbulence modeling for Francis turbine water passages simulation

    Energy Technology Data Exchange (ETDEWEB)

    Maruzewski, P; Munch, C; Mombelli, H P; Avellan, F [Ecole polytechnique federale de Lausanne, Laboratory of Hydraulic Machines Avenue de Cour 33 bis, CH-1007 Lausanne (Switzerland); Hayashi, H; Yamaishi, K; Hashii, T; Sugow, Y, E-mail: pierre.maruzewski@epfl.c [Nippon KOEI Power Systems, 1-22 Doukyu, Aza, Morijyuku, Sukagawa, Fukushima Pref. 962-8508 (Japan)

    2010-08-15

    The applications of Computational Fluid Dynamics, CFD, to hydraulic machines life require the ability to handle turbulent flows and to take into account the effects of turbulence on the mean flow. Nowadays, Direct Numerical Simulation, DNS, is still not a good candidate for hydraulic machines simulations due to an expensive computational time consuming. Large Eddy Simulation, LES, even, is of the same category of DNS, could be an alternative whereby only the small scale turbulent fluctuations are modeled and the larger scale fluctuations are computed directly. Nevertheless, the Reynolds-Averaged Navier-Stokes, RANS, model have become the widespread standard base for numerous hydraulic machine design procedures. However, for many applications involving wall-bounded flows and attached boundary layers, various hybrid combinations of LES and RANS are being considered, such as Detached Eddy Simulation, DES, whereby the RANS approximation is kept in the regions where the boundary layers are attached to the solid walls. Furthermore, the accuracy of CFD simulations is highly dependent on the grid quality, in terms of grid uniformity in complex configurations. Moreover any successful structured and unstructured CFD codes have to offer a wide range to the variety of classic RANS model to hybrid complex model. The aim of this study is to compare the behavior of turbulent simulations for both structured and unstructured grids topology with two different CFD codes which used the same Francis turbine. Hence, the study is intended to outline the encountered discrepancy for predicting the wake of turbine blades by using either the standard k-{epsilon} model, or the standard k-{epsilon} model or the SST shear stress model in a steady CFD simulation. Finally, comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements.

  5. Turbulence modeling for Francis turbine water passages simulation

    Science.gov (United States)

    Maruzewski, P.; Hayashi, H.; Munch, C.; Yamaishi, K.; Hashii, T.; Mombelli, H. P.; Sugow, Y.; Avellan, F.

    2010-08-01

    The applications of Computational Fluid Dynamics, CFD, to hydraulic machines life require the ability to handle turbulent flows and to take into account the effects of turbulence on the mean flow. Nowadays, Direct Numerical Simulation, DNS, is still not a good candidate for hydraulic machines simulations due to an expensive computational time consuming. Large Eddy Simulation, LES, even, is of the same category of DNS, could be an alternative whereby only the small scale turbulent fluctuations are modeled and the larger scale fluctuations are computed directly. Nevertheless, the Reynolds-Averaged Navier-Stokes, RANS, model have become the widespread standard base for numerous hydraulic machine design procedures. However, for many applications involving wall-bounded flows and attached boundary layers, various hybrid combinations of LES and RANS are being considered, such as Detached Eddy Simulation, DES, whereby the RANS approximation is kept in the regions where the boundary layers are attached to the solid walls. Furthermore, the accuracy of CFD simulations is highly dependent on the grid quality, in terms of grid uniformity in complex configurations. Moreover any successful structured and unstructured CFD codes have to offer a wide range to the variety of classic RANS model to hybrid complex model. The aim of this study is to compare the behavior of turbulent simulations for both structured and unstructured grids topology with two different CFD codes which used the same Francis turbine. Hence, the study is intended to outline the encountered discrepancy for predicting the wake of turbine blades by using either the standard k-epsilon model, or the standard k-epsilon model or the SST shear stress model in a steady CFD simulation. Finally, comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements.

  6. Pickering emulsion: A novel template for microencapsulated phase change materials with polymer–silica hybrid shell

    International Nuclear Information System (INIS)

    Yin, Dezhong; Ma, Li; Liu, Jinjie; Zhang, Qiuyu

    2014-01-01

    MePCMs (microencapsulated phase change materials) with covalently bonded SiO 2 /polymer hybrid as shell were fabricated via Pickering emulsion polymerization stabilized solely by organically-modified SiO 2 particles. Morphology and core–shell structure of these microcapsules were observed by scanning electron microscopy (SEM). Thermal properties of microencapsulated 1-dodecanol were determined using DSC (differential scanning calorimetry) and TGA (thermal gravimetric analysis). The results indicate that mass ratio of St (styrene)/DVB (divinylbenzene)/dodecanol has great effect on the morphology, inner structure, microencapsulation efficiency and durability of resultant MePCMs. When ratio of St/DVB/dodecanol was 5/1/12, dodecanol content of as much as 62.8% is obtained and the utility efficiency of dodecanol reaches 94.2%. The prepared MePCMs present good durability and thermal reliability. 2.2% of core material leached away the microcapsule after suspended in water for 10 days and 5.8% of core material leached after 2000 accelerated thermal cycling. Our study demonstrated that Pickering emulsion polymerization is a simple and robust method for the preparation of MePCMs with polymer–inorganic hybrids as shell. - Highlights: • We fabricated MePCM via surfactant-free Pickering emulsion polymerization. • The shell of MePCM was composed of PS/SiO 2 organic–inorganic hybrids. • The phase change enthalpy of MePCM is 125.0 J g −1 and the utility efficiency of 1-dodecanol reached 94.2%. • Only 2.2% and 5.8% of core material lost after durability test and 2000 accelerated thermal cycling respectively

  7. The number of pickers and stock-keeping unit arrangement on a uni-directional picking line

    Directory of Open Access Journals (Sweden)

    Hagspihl, Robert

    2014-10-01

    Full Text Available The order picking process is often the single largest expense in a distribution centre (DC. The DC considered in this paper uses a picking line configuration to perform order picking. The number of pickers in a picking line, and the initial arrangement of stock-keeping units (SKUs, are two important factors that affect the total completion time of the picking lines. In this paper, the picking line configuration is simulated with an agent-based approach to describe the behaviour of an individual picker. The simulation is then used to analyse the effect of the number of pickers and the SKU arrangement. Verification and validation of this model shows that the model represents the real-world picking line to a satisfactory degree. Marginal analysis (MA was chosen to determine a ‘good’ number of pickers by means of the simulation model. A look-up table is presented to provide decision support for the choice of a ‘good’ number of pickers to improve completion times of the picking line, for the properties of a specific picking line. The initial SKU arrangement on a picking line is shown to be a factor that can affect the level of picker congestion and the total completion time. The greedy ranking and partitioning (GRP and organ pipe arrangement (OPA techniques from the literature, as well as the historical SKU arrangements used by the retailer under consideration, were compared with the proposed classroom discipline heuristic (CDH for SKU arrangement. It was found that the CDH provides an more even spread of SKUs that are picked most frequently, thus decreasing congestion and total completion time.

  8. Remote tooling for inspection and repair in Pickering NGS-A calandria vault

    International Nuclear Information System (INIS)

    Hadji-Mirzai, M.; Tokarz, A.; Vandenberg, J.P.

    1993-01-01

    In recent years it has been necessary to develop capabilities for the inspection and repair of carbon steel components located within calandria vaults at Ontario Hydro's Pickering Nuclear Generating Station 'A'. Concerns about corrosion of piping and some of the structural components have made necessary the development of remote manipulators to inspect and repair carbon steel components within the vaults to ensure continued reliable operation of the units. Remote manipulators for this program have been designed to perform a number of inspection and repair tasks, and several versions have been developed to specialise in detailed inspection techniques and precision tooling module manipulation. (author)

  9. Pickering G.S. boiler repair: an example of planned maintenance

    International Nuclear Information System (INIS)

    Dalrymple, D.G.

    1976-04-01

    The first application of boiler repair tools and procedures is estimated to have yielded a four-fold return on the development investment. The need to develop such technology is a result of the environment in which boiler repairs must be made. As nuclear technology evolves and plants and components get bigger, equipment will increasingly have to be repaired in situ with minimum plant downtime and minimum exposure of repair personnel to radiation. This lecture traces development of the Pickering A boiler repair capability which is seen as an example of how utility and contractor should interact to anticipate and meet maintenance requirements. (author)

  10. The Vale of Pickering in the Mesolithic: uncovering the early post-glacial landscape

    Directory of Open Access Journals (Sweden)

    Tim Schadla-Hall

    2000-10-01

    Full Text Available Since 1954, when Grahame Clark published the results of his excavations at Star Carr in northeast Yorkshire, the site has been recognized as a key to understanding early Mesolithic huntergatherer settlement and subsistence in northwest Europe. In 1976, archaeological and palaeoenvironmental research in the area was resumed - since 1986 under the auspices of the Vale of Pickering Research Trust - and it is now possible to set Star Carr and nearby Mesolithic sites in the wider context of the early postglacial landscape.

  11. Development of upgraded full-core 3D diffusion models for the Pickering stations

    Energy Technology Data Exchange (ETDEWEB)

    Arsenault, B., E-mail: benoit.arsenault@amecfw.com [AMEC Foster Wheeler, Toronto, ON (Canada); Catovic, Z., E-mail: zlatko.catovic@opg.com [Ontario Power Generation, Pickering, ON (Canada); Shaula, S., E-mail: sergiy.shaula@amecfw.com [AMEC Foster Wheeler, Toronto, ON (Canada); Buchan, P.D., E-mail: david.buchan@opg.com [Ontario Power Generation, Pickering, ON (Canada)

    2015-07-01

    This paper describes a methodology used to model Pickering reactors with the Reactor Physics toolset currently in use at OPG stations, which includes the Reactor Physics Industry Standard Toolset (RFSP-IST/WIMS-IST/DRAGON-IST) and the fuel management code SORO. Detailed geometries were modeled in DRAGON-IST with devices and structures that extended into the reflector region and incremental properties were calculated for reactivity devices, guide tubes and structural materials based on the engineering drawings. Simulations and comparisons with measurements performed showed improved predictive capabilities of the new reactor physics models. (author)

  12. Development of upgraded full-core 3D diffusion models for the Pickering stations

    International Nuclear Information System (INIS)

    Arsenault, B.; Catovic, Z.; Shaula, S.; Buchan, P.D.

    2015-01-01

    This paper describes a methodology used to model Pickering reactors with the Reactor Physics toolset currently in use at OPG stations, which includes the Reactor Physics Industry Standard Toolset (RFSP-IST/WIMS-IST/DRAGON-IST) and the fuel management code SORO. Detailed geometries were modeled in DRAGON-IST with devices and structures that extended into the reflector region and incremental properties were calculated for reactivity devices, guide tubes and structural materials based on the engineering drawings. Simulations and comparisons with measurements performed showed improved predictive capabilities of the new reactor physics models. (author)

  13. Review of Ontario Hydro Pickering 'A' and Bruce 'A' nuclear generating stations' accident analyses

    International Nuclear Information System (INIS)

    Serdula, K.J.

    1988-01-01

    Deterministic safety analysis for the Pickering 'A' and Bruce 'A' nuclear generating stations were reviewed. The methodology used in the evaluation and assessment was based on the concept of 'N' critical parameters defining an N-dimensional safety parameter space. The reviewed accident analyses were evaluated and assessed based on their demonstrated safety coverage for credible values and trajectories of the critical parameters within this N-dimensional safety parameter space. The reported assessment did not consider probability of occurrence of event. The reviewed analyses were extensive for potential occurrence of accidents under normal steady-state operating conditions. These analyses demonstrated an adequate assurance of safety for the analyzed conditions. However, even for these reactor conditions, items have been identified for consideration of review and/or further study, which would provide a greater assurance of safety in the event of an accident. Accident analyses based on a plant in a normal transient operating state or in an off-normal condition but within the allowable operating envelope are not as extensive. Improvements in demonstrations and/or justifications of safety upon potential occurrence of accidents would provide further assurance of adequacy of safety under these conditions. Some events under these conditions have not been analyzed because of their judged low probability; however, accident analyses in this area should be considered. Recommendations are presented relating to these items; it is also recommended that further study is needed of the Pickering 'A' special safety systems

  14. Uplifting : mobile cranes and picker trucks get higher, stronger, and safer

    Energy Technology Data Exchange (ETDEWEB)

    Budd, G.

    2008-10-15

    New crane and picker truck equipment designed for use in the oil and gas industry was discussed in this article. The longest crane in the North America is due to arrive in Calgary soon. Mobile cranes are often used for maintenance, construction, and shutdowns at natural gas plants, refineries, and oil batteries. Telescopic cranes are also used to service pump jacks and lift rolls of coiled tubing into place on drilling rigs. While cranes carry more weight, picker trucks are more mobile and flexible. Lattice boom crawler cranes were designed to pick up loads and carry them to different positions. Telescopic cranes must remain stationary, and careful planning is needed to ensure that they are used efficiently. Modern telescopic cranes have hydraulically powered booms. Advanced steel alloy technology is used to produce lightweight booms equipped with automated pin-locking mechanisms. The largest telescopic crane in North America will be used by an oil and gas operator in Alberta. The crane will have a combined boom and lattice jib height of 226 meters, and its maximum lifting capacity is 1200 tonnes. Gantry cranes are also increasingly being used by oil and gas operators due to their ability to straddle loads, thereby reducing the risk of tipping. It was concluded that gantry cranes are particularly suitable for rougher terrains. 4 figs.

  15. Heterogeneous Pd catalysts as emulsifiers in Pickering emulsions for integrated multistep synthesis in flow chemistry.

    Science.gov (United States)

    Hiebler, Katharina; Lichtenegger, Georg J; Maier, Manuel C; Park, Eun Sung; Gonzales-Groom, Renie; Binks, Bernard P; Gruber-Woelfler, Heidrun

    2018-01-01

    Within the "compartmentalised smart factory" approach of the ONE-FLOW project the implementation of different catalysts in "compartments" provided by Pickering emulsions and their application in continuous flow is targeted. We present here the development of heterogeneous Pd catalysts that are ready to be used in combination with biocatalysts for catalytic cascade synthesis of active pharmaceutical ingredients (APIs). In particular, we focus on the application of the catalytic systems for Suzuki-Miyaura cross-coupling reactions, which is the key step in the synthesis of the targeted APIs valsartan and sacubitril. An immobilised enzyme will accomplish the final product formation via hydrolysis. In order to create a large interfacial area for the catalytic reactions and to keep the reagents separated until required, the catalyst particles are used to stabilise Pickering emulsions of oil and water. A set of Ce-Sn-Pd oxides with the molecular formula Ce 0.99- x Sn x Pd 0.01 O 2-δ ( x = 0-0.99) has been prepared utilising a simple single-step solution combustion method. The high applicability of the catalysts for different functional groups and their minimal leaching behaviour is demonstrated with various Suzuki-Miyaura cross-coupling reactions in batch as well as in continuous flow employing the so-called "plug & play reactor". Finally, we demonstrate the use of these particles as the sole emulsifier of oil-water emulsions for a range of oils.

  16. Selective removal of erythromycin by magnetic imprinted polymers synthesized from chitosan-stabilized Pickering emulsion.

    Science.gov (United States)

    Ou, Hongxiang; Chen, Qunhui; Pan, Jianming; Zhang, Yunlei; Huang, Yong; Qi, Xueyong

    2015-05-30

    Magnetic imprinted polymers (MIPs) were synthesized by Pickering emulsion polymerization and used to adsorb erythromycin (ERY) from aqueous solution. The oil-in-water Pickering emulsion was stabilized by chitosan nanoparticles with hydrophobic Fe3O4 nanoparticles as magnetic carrier. The imprinting system was fabricated by radical polymerization with functional and crosslinked monomer in the oil phase. Batches of static and dynamic adsorption experiments were conducted to analyze the adsorption performance on ERY. Isotherm data of MIPs well fitted the Freundlich model (from 15 °C to 35 °C), which indicated heterogeneous adsorption for ERY. The ERY adsorption capacity of MIPs was about 52.32 μmol/g at 15 °C. The adsorption kinetics was well described by the pseudo-first-order model, which suggested that physical interactions were primarily responsible for ERY adsorption. The Thomas model used in the fixed-bed adsorption design provided a better fit to the experimental data. Meanwhile, ERY exhibited higher affinity during adsorption on the MIPs compared with the adsorption capacity of azithromycin and chloramphenicol. The MIPs also exhibited excellent regeneration capacity with only about 5.04% adsorption efficiency loss in at least three repeated adsorption-desorption cycles. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Interfacial behaviour of sodium stearoyllactylate (SSL) as an oil-in-water pickering emulsion stabiliser.

    Science.gov (United States)

    Kurukji, D; Pichot, R; Spyropoulos, F; Norton, I T

    2013-11-01

    The ability of a food ingredient, sodium stearoyllactylate (SSL), to stabilise oil-in-water (O/W) emulsions against coalescence was investigated, and closely linked to its capacity to act as a Pickering stabiliser. Results showed that emulsion stability could be achieved with a relatively low SSL concentration (≥0.1 wt%), and cryogenic-scanning electron microscopy (cryo-SEM) visualisation of emulsion structure revealed the presence of colloidal SSL aggregates adsorbed at the oil-water interface. Surface properties of SSL could be modified by altering the size of these aggregates in water; a faster decrease in surface tension was observed when SSL dispersions were subjected to high pressure homogenisation (HPH). The rate of SSL adsorption at the sunflower oil-water interface also increased after HPH, and a higher interfacial tension (IFT) was observed with increasing SSL concentration. Differential scanning calorimetry (DSC) enabled a comparison of the thermal behaviour of SSL in aqueous dispersions with SSL-stabilised O/W emulsions. SSL melting enthalpy depended on emulsion interfacial area and the corresponding DSC data was used to determine the amount of SSL adsorbed at the oil-water interface. An idealised theoretical interfacial coverage calculation based on Pickering emulsion theory was in general agreement with the mass of SSL adsorbed as predicted by DSC. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  18. Pickering emulsions stabilized by biodegradable block copolymer micelles for controlled topical drug delivery.

    Science.gov (United States)

    Laredj-Bourezg, Faiza; Bolzinger, Marie-Alexandrine; Pelletier, Jocelyne; Chevalier, Yves

    2017-10-05

    Surfactant-free biocompatible and biodegradable Pickering emulsions were investigated as vehicles for skin delivery of hydrophobic drugs. O/w emulsions of medium-chain triglyceride (MCT) oil droplets loaded with all-trans retinol as a model hydrophobic drug were stabilized by block copolymer nanoparticles: either poly(lactide)-block-poly(ethylene glycol) (PLA-b-PEG) or poly(caprolactone)-block-poly(ethylene glycol) (PCL-b-PEG). Those innovative emulsions were prepared using two different processes allowing drug loading either inside oil droplets or inside both oil droplets and non-adsorbed block copolymer nanoparticles. Skin absorption of retinol was investigated in vitro on pig skin biopsies using the Franz cell method. Supplementary experiments by confocal fluorescence microscopy allowed the visualization of skin absorption of the Nile Red dye on histological sections. Retinol and Nile Red absorption experiments showed the large accumulation of hydrophobic drugs in the stratum corneum for the Pickering emulsions compared to the surfactant-based emulsion and an oil solution. Loading drug inside both oil droplets and block copolymer nanoparticles enhanced again skin absorption of drugs, which was ascribed to the supplementary contribution of free block copolymer nanoparticles loaded with drug. Such effect allowed tuning drug delivery to skin over a wide range by means of a suitable selection of either the formulation or the drug loading process. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Electrospun composite matrices of poly(ε-caprolactone)-montmorillonite made using tenside free Pickering emulsions

    International Nuclear Information System (INIS)

    Samanta, Archana; Takkar, Sonam; Kulshreshtha, Ritu; Nandan, Bhanu; Srivastava, Rajiv K.

    2016-01-01

    The production of composite electrospun matrices of poly(ε-caprolactone) (PCL) using an emulsifier-free emulsion, made with minimal organic solvent, as precursor is reported. Pickering emulsions of PCL were prepared using modified montmorillonite (MMT) clay as the stabilizer. Hydrophobic tallow group of the modified MMT clay resulted in analogous interaction of clay with oil and aqueous phase and its adsorption at the interface to provide stability to the resultant emulsion. Composite fibrous matrices of PCL and MMT were produced using electrospinning under controlled conditions. The fiber fineness was found to alter with PCL concentration and volume fraction of the aqueous and oil phases. A higher tensile strength and modulus was obtained with inclusion of MMT in PCL electrospun matrix in comparison to a matrix made using neat PCL. The presence of clay in the fibrous matrix did not change the cell proliferation efficiency in comparison to neat PCL matrix. Composite fibrous matrices of PCL/MMT bearing enhanced tensile properties may find applications in areas other than tissue engineering for example food packaging and filtration. - Highlights: • Tenside free, clay stabilized Pickering emulsion of PCL is made with minimal organic solvent. • Organic–inorganic composite fibrous matrices were produced via emulsion electrospinning. • Fiber fineness was efficiently controlled by variation in emulsion formulation. • Fibrous matrices of high tensile strength and modulus were obtained in comparison to neat PCL matrix. • PCL/clay matrices showed effective cell proliferation as a neat PCL matrix.

  20. Electrospun composite matrices of poly(ε-caprolactone)-montmorillonite made using tenside free Pickering emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Samanta, Archana [Department of Textile Technology, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Takkar, Sonam; Kulshreshtha, Ritu [Department of Biochemical Engineering and Biotechnology, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Nandan, Bhanu [Department of Textile Technology, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Srivastava, Rajiv K., E-mail: rajiv@textile.iitd.ac.in [Department of Textile Technology, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India)

    2016-12-01

    The production of composite electrospun matrices of poly(ε-caprolactone) (PCL) using an emulsifier-free emulsion, made with minimal organic solvent, as precursor is reported. Pickering emulsions of PCL were prepared using modified montmorillonite (MMT) clay as the stabilizer. Hydrophobic tallow group of the modified MMT clay resulted in analogous interaction of clay with oil and aqueous phase and its adsorption at the interface to provide stability to the resultant emulsion. Composite fibrous matrices of PCL and MMT were produced using electrospinning under controlled conditions. The fiber fineness was found to alter with PCL concentration and volume fraction of the aqueous and oil phases. A higher tensile strength and modulus was obtained with inclusion of MMT in PCL electrospun matrix in comparison to a matrix made using neat PCL. The presence of clay in the fibrous matrix did not change the cell proliferation efficiency in comparison to neat PCL matrix. Composite fibrous matrices of PCL/MMT bearing enhanced tensile properties may find applications in areas other than tissue engineering for example food packaging and filtration. - Highlights: • Tenside free, clay stabilized Pickering emulsion of PCL is made with minimal organic solvent. • Organic–inorganic composite fibrous matrices were produced via emulsion electrospinning. • Fiber fineness was efficiently controlled by variation in emulsion formulation. • Fibrous matrices of high tensile strength and modulus were obtained in comparison to neat PCL matrix. • PCL/clay matrices showed effective cell proliferation as a neat PCL matrix.

  1. AECB staff annual report on Pickering NGS for the year 1989

    International Nuclear Information System (INIS)

    1990-06-01

    This report presents a review of major licensing issues and the operational performance of Pickering NGS-A (Units 1-4) and Pickering NGS-B (Units 5-8) by the staff of the Atomic Energy Control Board (AECB) during 1989. Operations are monitored to ensure compliance with licensing requirements. This report is limited to those aspects that AECB staff consider to have particular safety significance. The number of infractions of the operating licence and the AECB Regulations doubled in 1989 compared to 1988. Three workers were exposed to radiation doses in excess of the regulatory limits. The AECB also found inadequate procedural compliance and an unacceptable level of housekeeping. Performance also requires improvement in response to AECB Health Physics appraisals; surveillance of systems by the Technical Section; chemical control performance; response to outstanding AECB action items; availability of special safety systems; operating memos, jumper records, call-ups and deficiency reports in effect; and fire fighting capability. Ontario Hydro has initiated a number of programs that are expected to result in improvements in these areas: an in-service station quality improvement plan; a program to improve and give assurance of compliance with the AECB Regulations, the operating licenses and the Operating Policies and Principles; a housekeeping and material condition improvement plan; and an action plan undertaken following radiation over-exposures. Given adequate resources and management support these programs should result in a noticeable improvement in station performance in 1990

  2. Nozzleless Fabrication of Oil-Core Biopolymeric Microcapsules by the Interfacial Gelation of Pickering Emulsion Templates.

    Science.gov (United States)

    Leong, Jun-Yee; Tey, Beng-Ti; Tan, Chin-Ping; Chan, Eng-Seng

    2015-08-05

    Ionotropic gelation has been an attractive method for the fabrication of biopolymeric oil-core microcapsules due to its safe and mild processing conditions. However, the mandatory use of a nozzle system to form the microcapsules restricts the process scalability and the production of small microcapsules (microcapsules through ionotropic gelation at the interface of an O/W Pickering emulsion. This approach involves the self-assembly of calcium carbonate (CaCO3) nanoparticles at the interface of O/W emulsion droplets followed by the addition of a polyanionic biopolymer into the aqueous phase. Subsequently, CaCO3 nanoparticles are dissolved by pH reduction, thus liberating Ca(2+) ions to cross-link the surrounding polyanionic biopolymer to form a shell that encapsulates the oil droplet. We demonstrate the versatility of this method by fabricating microcapsules from different types of polyanionic biopolymers (i.e., alginate, pectin, and gellan gum) and water-immiscible liquid cores (i.e., palm olein, cyclohexane, dichloromethane, and toluene). In addition, small microcapsules with a mean size smaller than 100 μm can be produced by selecting the appropriate conventional emulsification methods available to prepare the Pickering emulsion. The simplicity and versatility of this method allows biopolymeric microcapsules to be fabricated with ease by ionotropic gelation for numerous applications.

  3. Five-Item Francis Scale of Attitude toward Christianity: Construct and Nomological Validity and Internal Consistency among Colombian College Students

    Science.gov (United States)

    Ceballos, Guillermo A.; Suescun, Jesus D.; Oviedo, Heidi C.; Herazo, Edwin; Campo-Arias, Adalberto

    2015-01-01

    The Spanish version of the five-item Francis scale of attitude toward Christianity is a refinement of the short version of the Francis scale of attitude toward Christianity. The scale is a good measurement for intrinsic religiosity. It has been applied previously among Colombian adolescent students. The internal consistency and construct and…

  4. 75 FR 80730 - Francis Slakey on Behalf of the American Physical Society; Receipt of Petition for Rulemaking

    Science.gov (United States)

    2010-12-23

    ... [Docket No. PRM-70-9; NRC-2010-0372] Francis Slakey on Behalf of the American Physical Society; Receipt of... the NRC by Francis Slakey on behalf of the American Physical Society (APS). The petition was docketed... that over the next few years, the NRC would be reviewing license applications for new technologies, and...

  5. Estimating cancer risk in relation to tritium exposure from routine operation of a nuclear-generating station in Pickering, Ontario.

    Science.gov (United States)

    Wanigaratne, S; Holowaty, E; Jiang, H; Norwood, T A; Pietrusiak, M A; Brown, P

    2013-09-01

    Evidence suggests that current levels of tritium emissions from CANDU reactors in Canada are not related to adverse health effects. However, these studies lack tritium-specific dose data and have small numbers of cases. The purpose of our study was to determine whether tritium emitted from a nuclear-generating station during routine operation is associated with risk of cancer in Pickering, Ontario. A retrospective cohort was formed through linkage of Pickering and north Oshawa residents (1985) to incident cancer cases (1985-2005). We examined all sites combined, leukemia, lung, thyroid and childhood cancers (6-19 years) for males and females as well as female breast cancer. Tritium estimates were based on an atmospheric dispersion model, incorporating characteristics of annual tritium emissions and meteorology. Tritium concentration estimates were assigned to each cohort member based on exact location of residence. Person-years analysis was used to determine whether observed cancer cases were higher than expected. Cox proportional hazards regression was used to determine whether tritium was associated with radiation-sensitive cancers in Pickering. Person-years analysis showed female childhood cancer cases to be significantly higher than expected (standardized incidence ratio [SIR] = 1.99, 95% confidence interval [CI]: 1.08-3.38). The issue of multiple comparisons is the most likely explanation for this finding. Cox models revealed that female lung cancer was significantly higher in Pickering versus north Oshawa (HR = 2.34, 95% CI: 1.23-4.46) and that tritium was not associated with increased risk. The improved methodology used in this study adds to our understanding of cancer risks associated with low-dose tritium exposure. Tritium estimates were not associated with increased risk of radiationsensitive cancers in Pickering.

  6. Predicting the effect of ionising radiation on biological populations: testing of a non-linear Leslie model applied to a small mammal population

    International Nuclear Information System (INIS)

    Monte, Luigi

    2013-01-01

    The present work describes the application of a non-linear Leslie model for predicting the effects of ionising radiation on wild populations. The model assumes that, for protracted chronic irradiation, the effect-dose relationship is linear. In particular, the effects of radiation are modelled by relating the increase in the mortality rates of the individuals to the dose rates through a proportionality factor C. The model was tested using independent data and information from a series of experiments that were aimed at assessing the response to radiation of wild populations of meadow voles and whose results were described in the international literature. The comparison of the model results with the data selected from the above mentioned experiments showed that the model overestimated the detrimental effects of radiation on the size of irradiated populations when the values of C were within the range derived from the median lethal dose (L 50 ) for small mammals. The described non-linear model suggests that the non-expressed biotic potential of the species whose growth is limited by processes of environmental resistance, such as the competition among the individuals of the same or of different species for the exploitation of the available resources, can be a factor that determines a more effective response of population to the radiation effects. -- Highlights: • A model to assess the radiation effects on wild population is described. • The model is based on non-linear Leslie matrix. • The model is applied to small mammals living in an irradiated meadow. • Model output is conservative if effect-dose factor estimated from L 50 is used. • Systemic response to stress of populations in competitive conditions may be more effective

  7. Francis Bacon's New Science: Rhetoric and the Transformative Power of Print.

    Science.gov (United States)

    Heckel, David

    The process of projecting textual models onto the phenomenal world began with the invention of writing and accelerated through the manuscript culture of classical antiquity and the Middle Ages into the age of print. In Francis Bacon's work, the book (a metaphor for the phenomenal world) adapted to the demands of the printed text and reflects the…

  8. The Culture of Science and the Rhetoric of Scientism: From Francis Bacon to the Darwin Fish

    Science.gov (United States)

    Lessl, Thomas M.

    2007-01-01

    The culture of modern science continues to establish its public identity by appealing to values and historical conceptions that reflect its appropriation of various religious ideals during its formative period, most especially in the rhetoric of Francis Bacon. These elements have persisted because they continue to achieve similar goals, but the…

  9. Internal consistency of a Spanish translation of the Francis Scale of Attitude Toward Christianity Short Form.

    Science.gov (United States)

    Campo-Arias, Adalberto; Oviedo, Heidi Celina; Díaz, Carmen Elena; Cogollo, Zuleima

    2006-12-01

    This study evaluated the internal consistency of a Spanish version of the short form of the Francis Scale of Attitude Toward Christianity based on responses of 405 Colombian adolescent students ages 13 to 17 years. This translated short-form version of the scale had an internal consistency of .80. This estimate indicates suitable internal consistency reliability for research use in this population.

  10. "Ajaloo lõpp" on lähedal / Francis Fukuyama ; interv. Adam Piore

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2003-01-01

    Ajakirjas Newsweek ilmunud intervjuus vastab filosoof Francis Fukuyama küsimustele 2004. aasta kõige olulisemate probleemide, EL-i, Cancunis toimunud Maailma Kaubandusorganisatsiooni kõneluste, ajaloo lõppu jõudmise, Pakistani presidendile tehtud atentaadi kohta

  11. Power Swing Generated in Francis Turbines by Part Load and Overload Instabilities

    Directory of Open Access Journals (Sweden)

    David Valentín

    2017-12-01

    Full Text Available Hydropower plays a key role in the actual energy market due to its fast response and regulation capacity. In that way, hydraulic turbines are increasingly demanded to work at off-design conditions, where complex flow patterns and cavitation appear, especially in Francis turbines. The draft tube cavitation surge is a hydraulic phenomenon that appears in Francis turbines below and above its Best Efficiency Point (BEP. It is a low frequency phenomenon consisting of a vortex rope in the runner outlet and draft tube, which can become unstable when its frequency coincides with a natural frequency of the hydraulic circuit. At this situation, the output power can significantly swing, endangering the electrical grid stability. This study is focused on the detection of these instabilities in Francis turbines and their relationship with the output power swings. To do so, extensive experimental tests for different operating conditions have been carried out in a large prototype Francis turbine (444 MW of rated power within the frame of the European Project Hyperbole (FP7-ENERGY-2013-1. Several sensors have been installed in the hydraulic circuit (pressure sensors in the draft tube, spiral casing, and penstock, in the rotating and static structures (vibration sensors, proximity probes, and strain gauges in the runner and in the shaft, as well as in the electrical side (output power, intensity, and voltage. Moreover, a numerical Finite Element Method (FEM has been also used to relate the hydraulic excitation with the output power swing.

  12. Francis Farley presenting his novel "Catalysed Fusion" in the CERN Library

    CERN Multimedia

    Farley, Irina

    2013-01-01

    "Catalysed Fusion" is described by its author Francis Farley, 92, as a "true-to-life fantasy woven around particle physics" set in 1980s Geneva – "the city where nations meet and particles collide". Farley presented the book in the program "Literature in Focus" on Tuesday 16th April 2013.

  13. Hydraulic Turbines: The Francis Turbine. Technical Terminology Bulletin. Terminotech, Vol. 2, No. 2.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to the Francis turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. An explanatory illustration is appended. (JB)

  14. Saint Francis Xavier on Jesuit School Stages of the Bohemian Province

    Czech Academy of Sciences Publication Activity Database

    Bobková, Kateřina; Jacková, Magdaléna

    2015-01-01

    Roč. 25, č. 2 (2015), s. 135-155 ISSN 0515-3190 R&D Projects: GA ČR GPP406/12/P823 Institutional support: RVO:68378068 ; RVO:67985963 Keywords : St. Francis Xavier * Jesuit saints * Jesuit theatre * neolatin drama * school theatre * Avancini, Nicolaus * Engel, Arnoldus Subject RIV: AJ - Letters, Mass-media, Audiovision; AB - History (HIU-Y)

  15. Inventing Citizens, Imagining Gender Justice: The Suffrage Rhetoric of Virginia and Francis Minor

    Science.gov (United States)

    Ray, Angela G.; Richards, Cindy Koenig

    2007-01-01

    From the late 1860s through the mid-1870s, woman suffrage activists developed an ingenious legal argument, claiming that the U.S. Constitution already enfranchised women citizens. The argument, first articulated by St. Louis activists Virginia and Francis Minor, precipitated rhetorical performances by movement activists on public platforms and in…

  16. Glade/woodland restoration in the St. Francis Mountain Bird Conservation Area

    Science.gov (United States)

    David A. Hasenbeck

    2007-01-01

    The Missouri Department of Conservation (MDC), the Missouri Department of Natural Resources, the U.S. Forest Service, and American Bird Conservancy, share goals to restore and manage high quality glade, savanna, and woodland habitats within the Saint Francis Bird Conservation Area. The partnership endeavors to maintain and enhance an ecosystem with native glade and...

  17. Validez y confiabilidad de la escala breve de Francis para actitud ante el cristianismo

    Directory of Open Access Journals (Sweden)

    Zuleima Cogollo

    2012-04-01

    Resultados. La escala Francis-5 mostró una estructura unidimensional, con un valor propio de 3,681 que dio cuenta del 73,6% de la varianza. Las mujeres puntuaron significativamente mayor que los varones, 18,5 (DE=2,7 vs. 17,9 (DE=3,3 (t = 4,3; p

  18. 78 FR 59913 - Revision of the Land Management Plan for the Francis Marion National Forest

    Science.gov (United States)

    2013-09-30

    ... telecommunication devices for the deaf (TDD) may call the Federal Information Relay Service (FIRS) at 1-800- 877... planning process can also be found on the Francis Marion National Forest Web site at www.fs.usda.gov/goto/scnfs/fmplan . SUPPLEMENTARY INFORMATION: Pursuant to the 2012 Forest Planning Rule (36 CFR Part 219...

  19. Hydrologic and water quality monitoring on Turkey Creek watershed, Francis Marion National Forest, SC

    Science.gov (United States)

    D.M. Amatya; T.J. Callahan; A. Radecki-Pawlik; P. Drewes; C. Trettin; W.F. Hansen

    2008-01-01

    The re-initiation of a 7,260 ha forested watershed study on Turkey Creek, a 3rd order stream, within the Francis Marion National forest in South Carolina, completes the development of a multi-scale hydrology and ecosystem monitoring framework in the Atlantic Coastal Plain. Hydrology and water quality monitoring began on the Santee Experimental...

  20. Expanding worldwide urban solid waste recycling: The Brazilian social technology in waste pickers inclusion.

    Science.gov (United States)

    Rutkowski, Jacqueline E; Rutkowski, Emília W

    2015-12-01

    'If an integrated urban waste management system includes the informal recycling sector (IRS), there is a good chance that more solid waste is recycled' is common sense. However, informal integration brings additional social, environmental, and economic benefits, such as reduction of operational costs and environmental impacts of landfilling. Brazil is a global best practice example in terms of waste picker inclusion, and has received international recognition for its recycling levels. In addition to analysing the results of inclusive recycling approaches, this article evaluates a selection of the best Brazilian inclusive recycling practices and summaries and presents the resulting knowledge. The objective is to identify processes that enable the replication of the inclusion of the informal recycling sector model as part of municipal solid waste management. Qualitative and quantitative data have been collected in 25 Brazilian cities that have contracted waste pickers co-operatives for door-to-door selective collection of recyclables. Field data was collected in action research projects that worked with waste pickers co-operatives between 2006 and 2013. The Brazilian informal recycling sector integration model improves municipal solid waste recycling indicators: it shows an increase in the net tonness recycled, from 140 to 208 t month(-1), at a much lower cost per tonne than conventional selective collection systems. Inclusive systems show costs of US$35 per tonne of recyclables collected, well below the national average of US$195.26. This inclusive model improves the quality of collected material and the efficiency of municipal selective collection. It also diminishes the negative impacts of informal recycling, by reducing child labour, and by improving the conditions of work, occupational health and safety, and uncontrolled pollution. Although treating the Brazilian experience as a blueprint for transfer of experience in every case is unrealistic, the results

  1. Design and installation of a strategically placed algae mesh barrier at OPG Pickering Nuclear Generating Station

    International Nuclear Information System (INIS)

    Marttila, D.; Patrick, P.; Gregoris, C.

    2009-01-01

    Ontario Power Generation's Pickering Nuclear has experienced a number of events in which attached algae have become entrained in the water intake costing approximately $30M over the 1995-2005 period as a result of deratings, Unit shutdowns and other operational issues. In 2005-2006 OPG and Kinectrics worked collaboratively on evaluating different potential solutions to reduce the impact of algae on the station. One of the solutions developed by Kinectrics included a strategically placed barrier net designed to regulate algae flow into the station intake. In 2006, Kinectrics designed and installed the system, the first of its kind at a Nuclear Power Plant in Canada. The system was operational by May 2007. OPG completed an effectiveness study in 2007 and concluded the barrier system had a beneficial effect on reducing algae impact on the station. (author)

  2. THE INFLUENCE OF TRUST IN THE CONSTITUTION OF A BRAZILIAN COOPERATIVE OF SELECTIVE WASTE PICKERS

    Directory of Open Access Journals (Sweden)

    Dayanne Marciane Gonçalves

    2016-03-01

    Full Text Available Since the Brazilian public policy started to encourage solidarity economy in 2003, the number of projects and enterprises in this sector has steadily increased. Embeddedness has contributed to the understanding of organizational phenomena of solidarity economy and cooperatives. The aim of this study was to understand the influence of trust, from the perspective of Mark Granovetter’s social networks, on the constitution of a cooperative of urban recyclable waste pickers in southern Brazil between 1996 until early 2012, considered the foundation period. We used the qualitative method with a historical approach to social relationships and content analysis. Possible influences of trust were analysed based on the economic, social and political history of the cooperative. Among the main results, we highlight the existence of social relations before the constitution, defined by trust due to family identity and reputation built over time.

  3. Seismic response of the Pickering pressure relief duct to the 1985 Nahanni earthquake

    International Nuclear Information System (INIS)

    Ghobarah, A.

    1995-05-01

    The objective of this study is to examine the structural response of the Pickering pressure relief duct when subjected to the ground motion records of the 1985 Nahanni earthquake (December 23, 05:16 GMT, Site 1 - Iverson, N.W.T.). It also includes an estimate of the possible impact on the nuclear safety function of the duct. The structural models developed in an earlier study were used in this analysis. The response to the earthquake ground motion was determined on the basis of the estimated capacities of various components of the duct. The ability of the structure to fulfill its nuclear safety function is discussed. (author). 6 refs., 1 tab., 17 figs

  4. Leakage rate from LOCA-aged inflatable airlock seals Pickering NGS 'B' personnel doors

    International Nuclear Information System (INIS)

    Fayle, G.W.; Cordingley, D.C.

    1985-01-01

    In order to demonstrate to the Atomic Energy Control Board that an air-lock inflatable seal will function after a LOCA exposure, an inflatable seal intended for personnel doors at the Pickering NGS 'B' was exposed to the thermal/moisture conditions of the LOCA requirement. While attending to determine the post-LOCA leakage rate it was found that additional leaks developed during each post-LOCA inflation/deflation cycle. The seal had been significantly and irreparably deteriorated by the LOCA exposure. The test has demonstrated that this type of LOCA exposed seal should not be expected to withstand either additional pressure above 207 kPa or additional inflation/deflation cycling. A higher inflation pressure and/or cycling will reduce the likelihood of a post-LOCA seal retaining an inflation pressure sufficient to prevent leakage across the seal

  5. The Internal Consistency Reliability of the Katz-Francis Scale of Attitude toward Judaism among Australian Jews

    Directory of Open Access Journals (Sweden)

    Patrick Lumbroso

    2016-09-01

    Full Text Available The Katz-Francis Scale of Attitude toward Judaism was developed initially to extend among the Hebrew-speaking Jewish community in Israel a growing body of international research concerned to map the correlates, antecedents and consequences of individual differences in attitude toward religion as assessed by the Francis Scale of Attitude toward Christianity. The present paper explored the internal consistency reliability and construct validity of the English translation of the Katz-Francis Scale of Attitude toward Judaism among 101 Australian Jews. On the basis of these data, this instrument is commended for application in further research.

  6. Large scale replacement of fuel channels in the Pickering CANDU reactor using a man-in-the-loop remote control system

    International Nuclear Information System (INIS)

    Stratton, D.

    1991-01-01

    Spar Aerospace Limited of Toronto is presently under contract to Ontario Hydro to design a Remote Manipulation and Control System (RMCS) to be used during the large scale replacement of the fuel channels in the Pickering A Nuclear Generating Station. The system is designed to support the replacement of all 390 fuel channels in each of the four reactors at the Pickering A station in a safe manner that minimizes worker radiation exposure and unit outage time

  7. Internal consistency of a five-item form of the Francis Scale of Attitude Toward Christianity among adolescent students.

    Science.gov (United States)

    Campo-Arias, Adalberto; Oviedo, Heidi Celina; Cogollo, Zuleima

    2009-04-01

    The short form of the Francis Scale of Attitude Toward Christianity (L. J. Francis, 1992) is a 7-item Likert-type scale that shows high homogeneity among adolescents. The psychometric performance of a shorter version of this scale has not been explored. The authors aimed to determine the internal consistency of a 5-item form of the Francis Scale of Attitude Toward Christianity among 405 students from a school in Cartagena, Colombia. The authors computed the Cronbach's alpha coefficient for the 5 items with a greater corrected item-total punctuation correlation. The version without Items 2 and 7 showed internal consistency of .87. The 5-item version of the Francis Scale of Attitude Toward Christianity exhibited higher internal consistency than did the 7-item version. Future researchers should corroborate this finding.

  8. High-Surface-Area, Emulsion-Templated Carbon Foams by Activation of polyHIPEs Derived from Pickering Emulsions

    Directory of Open Access Journals (Sweden)

    Robert T. Woodward

    2016-09-01

    Full Text Available Carbon foams displaying hierarchical porosity and excellent surface areas of >1400 m2/g can be produced by the activation of macroporous poly(divinylbenzene. Poly(divinylbenzene was synthesized from the polymerization of the continuous, but minority, phase of a simple high internal phase Pickering emulsion. By the addition of KOH, chemical activation of the materials is induced during carbonization, producing Pickering-emulsion-templated carbon foams, or carboHIPEs, with tailorable macropore diameters and surface areas almost triple that of those previously reported. The retention of the customizable, macroporous open-cell structure of the poly(divinylbenzene precursor and the production of a large degree of microporosity during activation leads to tailorable carboHIPEs with excellent surface areas.

  9. Field testing of behavioral barriers for cooling water intake structures -test site 1 - Pickering Nuclear Generating Station

    International Nuclear Information System (INIS)

    Patrick, P.H.; McKinley, R.S.; Micheletti, W.C.

    1988-01-01

    A multi-year research program was developed by the Electric Power Research Institute to evaluate the effectiveness of selected behavioral systems for fish exclusion at sites representative of different aquatic environments. The first test site was the Pickering Nuclear Generating Station (NGS) located on Lake Ontario which represented the Great Lakes environment. A single pneumatic popper, a low frequency, high amplitude sound deterrent, was found to effectively exclude adult alewife, the principal species impinged at Pickering NGS. An air bubble curtain, used either alone or combined with strobe lights, was not a consistent deterrent. Effectiveness of air bubbles was only enhanced when used in association with a popper. Strobe lights were the least effective of the three devices tested. Operation of all three devices together did not surpass the effectiveness of the popper when used alone. Sound deterrents show promise for fish exclusion at generating stations located on the Great Lakes

  10. Hydroxyapatite-armored poly(ε-caprolactone) microspheres and hydroxyapatite microcapsules fabricated via a Pickering emulsion route.

    Science.gov (United States)

    Fujii, Syuji; Okada, Masahiro; Nishimura, Taiki; Maeda, Hayata; Sugimoto, Tatsuya; Hamasaki, Hiroyuki; Furuzono, Tsutomu; Nakamura, Yoshinobu

    2012-05-15

    Hydroxyapatite (HAp) nanoparticle-armored poly(ε-caprolactone) (PCL) microspheres were fabricated via a "Pickering-type" emulsion solvent evaporation method in the absence of any molecular surfactants. It was clarified that the interaction between carbonyl/carboxylic acid groups of PCL and the HAp nanoparticles at an oil-water interface played a crucial role in the preparation of the stable Pickering-type emulsions and the HAp nanoparticle-armored microspheres. The HAp nanoparticle-armored PCL microspheres were characterized in terms of size, size distribution, morphology, and chemical compositions using scanning electron microscopy, laser diffraction, energy dispersive X-ray microanalysis, and thermogravimetric analysis. The presence of HAp nanoparticles at the surface of the microspheres was confirmed by scanning electron microscopy and energy dispersive X-ray microanalysis. Pyrolysis of the PCL cores led to the formation of the corresponding HAp hollow microcapsules. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Effects of draft tube on the hydraulic performance of a Francis turbine

    International Nuclear Information System (INIS)

    Jeon, J H; Byeon, S S; Kim, Y J

    2013-01-01

    The draft tube is an important component of a Francis turbine which influences the hydraulic performance. It is located just under the runner and allowed to decelerate the flow velocity exiting the runner, thereby converting the excess of kinetic energy into static pressure. In this study, we have numerically investigated the hydraulic performance of a Francis turbine on the 15MW hydropower generation with various design parameters (three types of draft tube, thickness of guide vane) through a three-dimensional numerical method with the SST turbulent model. The vortex rope characteristics of the draft tube were confirmed. The results of the vortex flow fields and flow characteristics were graphically depicted with different design parameters and operating conditions

  12. Robust Finite-Time Terminal Sliding Mode Control for a Francis Hydroturbine Governing System

    Directory of Open Access Journals (Sweden)

    Fengjiao Wu

    2016-01-01

    Full Text Available The robust finite-time control for a Francis hydroturbine governing system is investigated in this paper. Firstly, the mathematical model of a Francis hydroturbine governing system is presented and the nonlinear vibration characteristics are analyzed. Then, on the basis of finite-time control theory and terminal sliding mode scheme, a new robust finite-time terminal sliding mode control method is proposed for nonlinear vibration control of the hydroturbine governing system. Furthermore, the designed controller has good robustness which could resist external random disturbances. Numerical simulations are employed to verify the effectiveness and superiority of the designed finite-time sliding mode control scheme. The approach proposed in this paper is simple and also provides a reference for relevant hydropower systems.

  13. Experimental investigations of the unsteady flow in a Francis turbine draft tube cone

    International Nuclear Information System (INIS)

    Baya, A; Muntean, S; Campian, V C; Cuzmos, A; Diaconescu, M; Balan, G

    2010-01-01

    Operating Francis turbines at partial discharge is often hindered by the development of the helical vortex (so-called vortex rope) downstream the runner, in the draft tube cone. The unsteady pressure field induced by precessing vortex rope leads to pressure fluctuations. The paper presents the experimental investigations of the unsteady pressure field generated by precessing vortex rope and its associated pressure fluctuations into a draft tube of the Francis turbine operating at partial discharge. In situ measurements are performed in order to evaluate the pressure fluctuations and vortex rope frequency at partial load operation. Three pressure taps are installed on the cone wall of the draft tube in order to record the unsteady pressure. As a result, the Fourier spectra are obtained in order to evaluate the amplitude of pressure fluctuations and vortex rope frequency. Moreover, the wall pressure recovery along to the draft tube cone is acquired. Finally, conclusions are drawn in order to present the vortex rope effects.

  14. Experimental investigations of the unsteady flow in a Francis turbine draft tube cone

    Energy Technology Data Exchange (ETDEWEB)

    Baya, A [Department of Hydraulic Machinery, ' Politehnica' University of Timisoara Bv. Mihai Viteazu 1, RO-300222, Timisoara (Romania); Muntean, S [Centre of Advanced Research in Engineering Sciences, Romanian Academy - Timisoara Branch Bv. Mihai Viteazu 24, RO-300223, Timisoara (Romania); Campian, V C; Cuzmos, A [Research Center in Hydraulics, Automation and Heat Transfer, ' Eftimie Murgu' University of Resita P-ta. Traian Vuia 1-4, RO-320085, Resita (Romania); Diaconescu, M; Balan, G, E-mail: abaya@mh.mec.upt.r [Ramnicu Valcea Subsidiary, S.C. Hidroelectrica S.A. Str. Decebal 11, RO-240255, Ramnicu Valcea (Romania)

    2010-08-15

    Operating Francis turbines at partial discharge is often hindered by the development of the helical vortex (so-called vortex rope) downstream the runner, in the draft tube cone. The unsteady pressure field induced by precessing vortex rope leads to pressure fluctuations. The paper presents the experimental investigations of the unsteady pressure field generated by precessing vortex rope and its associated pressure fluctuations into a draft tube of the Francis turbine operating at partial discharge. In situ measurements are performed in order to evaluate the pressure fluctuations and vortex rope frequency at partial load operation. Three pressure taps are installed on the cone wall of the draft tube in order to record the unsteady pressure. As a result, the Fourier spectra are obtained in order to evaluate the amplitude of pressure fluctuations and vortex rope frequency. Moreover, the wall pressure recovery along to the draft tube cone is acquired. Finally, conclusions are drawn in order to present the vortex rope effects.

  15. On the centenary of the birth of Francis H. C. Crick - from physics to genetics and neuroscience.

    Science.gov (United States)

    Teive, Hélio A G

    2016-04-01

    The year 2016 marks the centenary of the birth of Francis Crick (1916-2004), who made outstanding contributions to genetics and neuroscience. In 1953, in a collaborative study, Francis Crick and James Watson discovered the DNA double helix, and in 1962 they and Maurice Wilkins were awarded the Noble Prize in Physiology or Medicine. Crick subsequently became very interested in neuroscience, particularly consciousness and its relationship to the claustrum, a small gray matter structure between the insula and putamen.

  16. Calculation of homogenized Pickering NGS stainless steel adjuster rod neutron cross-sections using conservation of reaction rates

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, R C [Atlantic Nuclear Services Ltd. (Canada); Tran, F [Ontario Hydro, Pickering, ON (Canada). Pickering Generating Station

    1996-12-31

    A homogenization methodology for calculation of reactivity device incremental cross-sections has been developed using reaction rate conservation (RRC). A heterogeneous transport calculation of flux was utilised to produce the homogenized cross-sections for a finite difference two group diffusion code. The RRC cross-sections have been shown to improve significantly the prediction of reactivity worth for stainless steel adjuster rods installed in Pickering NGS reactors. (author). 10 refs., 3 tabs., 6 figs.

  17. Application of Shuttle Remote Manipulator System technology to the replacement of fuel channels in the Pickering CANDU reactor

    International Nuclear Information System (INIS)

    Stratton, D.; Butt, C.

    1982-04-01

    Spar Aerospace Limited of Toronto was the prime contractor to the National Research Council of Canada for the design and development of the Shuttle Remote Manipulator (SRMS). Spar is presently under contract to Ontario Hydro to design and build a Remote Manipulation Control System to replace the fuel channels in the Pickering A Nuclear Generating Station. The equipment may be used to replace the fuel channels in six other early generation CANDU reactors

  18. The Effect of Storage and Routing Policies on Picker Blocking in a Real-life Narrow-aisle Warehouse

    OpenAIRE

    Van Gils, Teun; Caris, An; Ramaekers, Katrien

    2017-01-01

    Upcoming e-commerce markets force warehouses to handle a large number of orders within short time windows. Narrow-aisle order picking systems allow to store a large number of products in small areas. In manual order picking systems, narrow aisles can result in substantial waiting time compared to wide-aisle systems. The objective of this study is to analyse the joint effect of the two main operational order picking planning problems, storage location assignment and order picker routing, on or...

  19. Psychometric properties of the Francis Scale of Attitude Towards Christianity among Portuguese university students.

    Science.gov (United States)

    Ferreira, Ana Veríssimo; Neto, Félix

    2002-12-01

    To facilitate use of the adult form of the Francis Scale of Attitude Towards Christianity in cross-cultural studies, the psychometric characteristics of the translated scale were examined among 323 university students in Portugal (130 men and 193 women). Their ages ranged from 18 to 31 years. Analysis supported the unidimensionality, internal consistency, and construct validity of this scale in this sample of Portuguese university students.

  20. The Norwegian translation of the Francis Scale of Attitude toward Christianity.

    Science.gov (United States)

    Francis, Leslie J; Enger, Trond

    2002-12-01

    This paper reviews the development of the Francis Scale of Attitude toward Christianity and then examines the psychometric properties of the Norwegian translation of this instrument among a sample of 479 young people between the ages of 11 and 18 years attending secondary school. The data support the reliability of this instrument and commend it for further validation studies and for wider general use among young people in Norway.

  1. Assessing clergy work-related psychological health : reliability and validity of the Francis Burnout Inventory

    OpenAIRE

    Francis, Leslie J.; Laycock, Patrick; Crea, Giuseppe

    2017-01-01

    Drawing on the classic model of balanced affect, the Francis Burnout Inventory (FBI) conceptualised good work-related psychological health among clergy in terms of negative affect being balanced by positive affect. In the FBI negative affect is assessed by the Scale of Emotional Exhaustion in Ministry (SEEM) and positive affect is assessed by the Satisfaction in Ministry Scale (SIMS). In support of the idea of balanced affect, previous work had shown a significant interaction between the effe...

  2. Waste Picker Organizations and Their Contribution to the Circular Economy: Two Case Studies from a Global South Perspective

    Directory of Open Access Journals (Sweden)

    Jutta Gutberlet

    2017-09-01

    Full Text Available The discussion on the circular economy (CE has attracted a rising interest within global policy and business as a way of increasing the sustainability of production and consumption. Yet the literature mostly portrays a Global North perspective. There is a diverse spectrum of community-based organizations playing important roles in resource recovery and transformation, particularly, but not only, in Global South countries, providing innovative examples for grassroots involvement in waste management and in the CE. This article proposes to add a Southern lens, situated in the context of waste picker organizations, to the concept of CE. The discursive framework in this article couples ecological economy (EE with social/solidarity economy (SSE, focusing not only on environmental sustainability but also on social, economic, political and cultural dimensions involved in production, consumption and discard. We acknowledge that grassroots movements contribute to policy making and improve urban waste management systems. The paper outlines two empirical studies (Argentina, Brazil that illustrate how waste picker organizations perform selective waste collection services, engage with municipalities and industries, and practice the CE. The research reveals that social and political facets need to be added to the debate about the CE, linking environmental management and policy with community development and recognizing waste pickers as protagonists in the CE. Our findings emphasize a need for a change of persisting inequalities in public policy by recognizing the importance of popular waste management praxis and knowledge, ultimately redefining the CE.

  3. AECB staff annual assessment of the Pickering A and B Nuclear Generating Stations for the year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Pickering Nuclear Generating Station (PNGS) is located on the north shore of Lake Ontario, about 32 km east of downtown Toronto. It consists of two stations, PNGS-A and PNGS-B. Each station contains four reactor units. PNGS-A consists of Units 1 to 4, while PNGS-B consists of Units 5 to 8. Each unit can generate about 540 megawatts of electricity. All eight units are located within a single enclosure. Ontario Hydro`s Pickering Nuclear Division has assigned one Station Director with authority over both stations, but each station has its own organization. AECB issue a separate operating licence for each station. This report presents the Atomic Energy Control Board staff assessment of the Pickering stations` safety performance in 1994 and other aspects that they consider to have significant impact on nuclear safety. AECB based their conclusions on their observations, audits, inspections and review of information that Ontario Hydro submits to them as required by the station Operating Licences. 11 tabs., 8 figs.

  4. AECB staff annual assessment of the Pickering A and B Nuclear Generating Stations for the year 1994

    International Nuclear Information System (INIS)

    1995-06-01

    The Pickering Nuclear Generating Station (PNGS) is located on the north shore of Lake Ontario, about 32 km east of downtown Toronto. It consists of two stations, PNGS-A and PNGS-B. Each station contains four reactor units. PNGS-A consists of Units 1 to 4, while PNGS-B consists of Units 5 to 8. Each unit can generate about 540 megawatts of electricity. All eight units are located within a single enclosure. Ontario Hydro's Pickering Nuclear Division has assigned one Station Director with authority over both stations, but each station has its own organization. AECB issue a separate operating licence for each station. This report presents the Atomic Energy Control Board staff assessment of the Pickering stations' safety performance in 1994 and other aspects that they consider to have significant impact on nuclear safety. AECB based their conclusions on their observations, audits, inspections and review of information that Ontario Hydro submits to them as required by the station Operating Licences. 11 tabs., 8 figs

  5. The calculation of fluid-structure interaction and fatigue analysis for Francis turbine runner

    International Nuclear Information System (INIS)

    Wang, X F; Li, H L; Zhu, F W

    2012-01-01

    Francis turbine, as a widely used hydro turbine, is especially suited for the hydropower station with high hydraulic head and higher hydraulic head. For such turbine generator units all around the world, the crack streaks usually come out after a long time use and the resulted accidents may cause huge losses. Hence, it is meaningful to refine the design assuring the stability and safety of the Francis turbine. In this paper, the stiffness and strength as well as the fatigue life of the Francis turbine are studied. Concerning on the turbine of one certain hydropower station, the flow field inside the turbine are first simulated and the pressure distribution around the blades are derived. Meanwhile, the stress distributions of the blades are also obtained. Based on these, the fatigue analyses are applied on the turbine. According to the results of fatigue analyses, some optimal designs on the turbine are verified. The results show that with the optimal designs, the hydraulic performances of the turbine do not change too much while the maximum stress on the turbine decrease and the fatigue life increase as well.

  6. Hydroacoustic simulation of rotor-stator interaction in resonance conditions in Francis pump-turbine

    International Nuclear Information System (INIS)

    Nicolet, C; Ruchonnet, N; Alligne, S; Avellan, F; Koutnik, J

    2010-01-01

    Combined effect of rotating pressure field related to runner blade and wakes of wicket gates leads to rotor stator interactions, RSI, in Francis pump-turbines. These interactions induce pressures waves propagating in the entire hydraulic machine. Superposition of those pressure waves may result in standing wave in the spiral casing and rotating diametrical mode in the guide vanes and can cause strong pressure fluctuations and vibrations. This paper presents the modeling, simulation and analysis of Rotor-Stator Interaction of a scale model of a Francis pump-turbine and related test rig using a one-dimensional approach. The hydroacoustic modeling of the Francis pump-turbine takes into account the spiral casing, the 20 guide vanes, the 9 rotating runner vanes. The connection between stationary and rotating parts is ensured by a valve network driven according to the unsteady flow distribution between guide vanes and runner vanes. Time domain simulations are performed for 2 different runner rotational speeds in turbine mode. The simulation results are analyzed in frequency domain and highlights hydroacoustic resonance between RSI excitations and the spiral case. Rotating diametrical mode in the vaneless gap and standing wave in the spiral case are identified. The influence of the resonance on phase and amplitude of pressure fluctuations obtained for both the spiral case and the vaneless gap is analyzed. The mode shape and frequencies are confirmed using eigenvalues analysis.

  7. “There is nothing better than a theory”: A few remarks on the theoretical practice of contemporary avantgarde women writers (Lyn Hejinian, Leslie Scalapino, Carla Harryman

    Directory of Open Access Journals (Sweden)

    Małgorzata Myk

    2013-01-01

    Full Text Available The essay discusses theoretical practices of three major Americanexperimental women writers associated with L=A=N=G=U=A=G=E poets LynHejinian, Leslie Scalapino, and Carla Harryman, who played a crucial role in shapingthe present-day critical and theoretical literary debate regarding the status of formallyradical literature engaged in questions of feminist epistemology and written bywomen. Devoted to language and its ideological dimension, their work is based ona wager that poetic practice is a socially engaged strategy of intervention (Harryman,and as such functions as a language-oriented feminist epistemology. Hejinian,Scalapino, and Harryman created a significant literary and theoretical body of workthat includes complex genre-bending hybrid texts deeply rooted in contemporaryfeminist discourses and preoccupied with such issues as production of knowledge,meaning, identity, gender, and sexuality, hidden ideological mechanismsof the conventional narrative, and the imperative of its constant refiguration.The article is also an attempt to see their work in a broader context of feministthought, ranging from écriture féminine, through Judith Butler’s and Denise Riley’scritiques of identity politics, to the posthumanist horizon of Donna Haraway’scyborg writing.

  8. Quinoa starch granules as stabilizing particles for production of Pickering emulsions.

    Science.gov (United States)

    Rayner, Marilyn; Sjöö, Malin; Timgren, Anna; Dejmek, Petr

    2012-01-01

    Intact starch granules isolated from quinoa (Chenopodium quinoa Willd.) were used to stabilize emulsion drops in so-called Pickering emulsions. Miglyol 812 was used as dispersed phase and a phosphate buffer (pH7) with different salt (NaCl) concentrations was used as the continuous phase. The starch granules were hydrophobically modified to different degrees by octenyl succinic anhydride (OSA) or by dry heat treatment at 120 degrees C in order to study the effect on the resulting emulsion drop size. The degree of OSA-modification had a low to moderate impact on drop size. The highest level of modification (4.66%) showed the largest mean drop size, and lowest amount of free starch, which could be an effect of a higher degree of aggregation of the starch granules and, thereby, also the emulsion drops stabilized by them. The heat treated starch granules had a poor stabilizing ability and only the starch heated for the longest time (150 min at 120 degrees C) had a better emulsifying capacity than the un-modified native starch granules. The effect of salt concentration was rather limited. However, an increased concentration of salt slightly increased the mean drop size and the elastic modulus.

  9. Evaluation of severe accident risk in the Pickering a risk assessment

    International Nuclear Information System (INIS)

    Dinnie, K.S.; Raina, V.M.

    1997-01-01

    The nature of the design of commercial power plants is such that significant impacts on public health can only occur if a number of barriers fail. Rigorous design and licensing requirements ensure that the more likely accidents do not fail all these barriers and their contribution to risk is likely to be small. The task of estimating accident risk must, therefore, focus more towards those less likely but potentially more serious combinations of failures that are characterized by the following: a) a large release of fission products into the containment atmosphere, b) a breach in the containment envelope, and c) the existence of a driving force to expel the containment atmosphere to the outside environment. The likelihood of such conditions existing simultaneously during the course of an accident is expected to be small, such that experience and data regarding the behaviour of plant systems under such conditions is sparse or non-existent. The challenge of Probabilistic Safety Assessments (PSAs) is to examine the potential for severe accidents using approaches that are sufficiently detailed and realistic to provide valid information regarding plant risk and susceptibilities, while simple enough to keep the analysis manageable. This paper outlines the key features of the Pickering A Risk Assessment (PARA) (1) and the manner in which it addresses these issues, and provides some insights into the results and conclusions drawn from the study. (author)

  10. Fragger: a protein fragment picker for structural queries [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Francois Berenger

    2018-04-01

    Full Text Available Protein modeling and design activities often require querying the Protein Data Bank (PDB with a structural fragment, possibly containing gaps. For some applications, it is preferable to work on a specific subset of the PDB or with unpublished structures. These requirements, along with specific user needs, motivated the creation of a new software to manage and query 3D protein fragments. Fragger is a protein fragment picker that allows protein fragment databases to be created and queried. All fragment lengths are supported and any set of PDB files can be used to create a database. Fragger can efficiently search a fragment database with a query fragment and a distance threshold. Matching fragments are ranked by distance to the query. The query fragment can have structural gaps and the allowed amino acid sequences matching a query can be constrained via a regular expression of one-letter amino acid codes. Fragger also incorporates a tool to compute the backbone RMSD of one versus many fragments in high throughput. Fragger should be useful for protein design, loop grafting and related structural bioinformatics tasks.

  11. The examination of the ruptured Zircaloy-2 pressure tube from Pickering NGS Unit 2

    International Nuclear Information System (INIS)

    Cheadle, B.A.; Smith, A.D.; Baskin, C.C.

    1985-07-01

    On 1983 August 01 a Zircaloy-2 pressure tube in Pickering NGS Unit 2 ruptured. All the fuel channel components, the fuel bundles, pressure tube, end fittings, garter springs and calandria tubes were shipped to Chalk River Nuclear Laboratories for examination to determine the cause of the rupture. The examination showed that the rupture initiated at a series of hydride blisters on the outside surface of the pressure tube. The blisters formed because of the garter spring spacers between the pressure tube and calandria tube was about one metre out of position. This allowed the horizontal pressure tube to sag by creep and touch the cool calandria tube. The resulting thermal gradients in the pressure tube concentrated the hydrogen and deuterium at the cool zones and blisters of solid hydride formed. Cracks initiated at several of the blisters and linked together to form a partial through wall critical crack which initiated the final rupture. The video presentation shows how the examination of the fuel channel components was conducted in underwater bays and shielded cells and explains the sequence of events that caused the rupture

  12. Electrospun composite matrices of poly(ε-caprolactone)-montmorillonite made using tenside free Pickering emulsions.

    Science.gov (United States)

    Samanta, Archana; Takkar, Sonam; Kulshreshtha, Ritu; Nandan, Bhanu; Srivastava, Rajiv K

    2016-12-01

    The production of composite electrospun matrices of poly(ε-caprolactone) (PCL) using an emulsifier-free emulsion, made with minimal organic solvent, as precursor is reported. Pickering emulsions of PCL were prepared using modified montmorillonite (MMT) clay as the stabilizer. Hydrophobic tallow group of the modified MMT clay resulted in analogous interaction of clay with oil and aqueous phase and its adsorption at the interface to provide stability to the resultant emulsion. Composite fibrous matrices of PCL and MMT were produced using electrospinning under controlled conditions. The fiber fineness was found to alter with PCL concentration and volume fraction of the aqueous and oil phases. A higher tensile strength and modulus was obtained with inclusion of MMT in PCL electrospun matrix in comparison to a matrix made using neat PCL. The presence of clay in the fibrous matrix did not change the cell proliferation efficiency in comparison to neat PCL matrix. Composite fibrous matrices of PCL/MMT bearing enhanced tensile properties may find applications in areas other than tissue engineering for example food packaging and filtration. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Production of Concentrated Pickering Emulsions with Narrow Size Distributions Using Stirred Cell Membrane Emulsification.

    Science.gov (United States)

    Manga, Mohamed S; York, David W

    2017-09-12

    Stirred cell membrane emulsification (SCME) has been employed to prepare concentrated Pickering oil in water emulsions solely stabilized by fumed silica nanoparticles. The optimal conditions under which highly stable and low-polydispersity concentrated emulsions using the SCME approach are highlighted. Optimization of the oil flux rates and the paddle stirrer speeds are critical to achieving control over the droplet size and size distribution. Investigating the influence of oil volume fraction highlights the criticality of the initial particle loading in the continuous phase on the final droplet size and polydispersity. At a particle loading of 4 wt %, both the droplet size and polydispersity increase with increasing of the oil volume fraction above 50%. As more interfacial area is produced, the number of particles available in the continuous phase diminishes, and coincidently a reduction in the kinetics of particle adsorption to the interface resulting in larger polydisperse droplets occurs. Increasing the particle loading to 10 wt % leads to significant improvements in both size and polydispersity with oil volume fractions as high as 70% produced with coefficient of variation values as low as ∼30% compared to ∼75% using conventional homogenization techniques.

  14. Intestinal parasitism among waste pickers in Mato Grosso do Sul, Midwest Brazil

    Directory of Open Access Journals (Sweden)

    Minoru German Higa Júnior

    2017-12-01

    Full Text Available ABSTRACT The purpose of this study was to estimate the prevalence of intestinal parasites in both cooperative-affiliated and independent waste pickers operating at the municipal sanitary landfill in Campo Grande, Mato Grosso do Sul, Brazil, and associate these findings with hemoglobin, eosinophils, vitamin A and C levels and interleukin 5 and 10 (IL-5 and IL-10 production. Biological samples were collected, in addition to clinical, epidemiological, and sociodemographic data. Stool analyzes were based on sedimentation by centrifugation and on spontaneous sedimentation. High-performance liquid chromatography was used to determine vitamin A and C levels. ELISA was employed to quantify interleukins. Intestinal parasites were found in 29 of the 66 subjects assessed (43.9%. Endolimax nana (22.7%, Entamoeba coli (21.1%, Giardia lamblia (6.1%, Entamoeba histolytica/E. dispar (4.5%, and Ascaris lumbricoides (4.5% were the most prevalent species. Pathogenic parasites were detected in 11 individuals (16.7%. Hypovitaminoses A and C were detected in 19.6% (13/66 and 98.4% (65/66 of subjects, respectively. IL-5 and IL-10 production was observed in 21 (31.8% and 32 (48.4% subjects, respectively. Infection with pathogenic intestinal parasites was not a cause of vitamin A and C deficiency or IL-5 and IL-10 production among these workers.

  15. System dynamics applied to closed loop supply chains of desktops and laptops in Brazil: A perspective for social inclusion of waste pickers.

    Science.gov (United States)

    Ghisolfi, Verônica; Diniz Chaves, Gisele de Lorena; Ribeiro Siman, Renato; Xavier, Lúcia Helena

    2017-02-01

    The structure of reverse logistics for waste electrical and electronic equipment (WEEE) is essential to minimize the impacts of their improper disposal. In this context, the Brazilian Solid Waste Policy (BSWP) was a regulatory milestone in Brazil, submitting WEEE to the mandatory implementation of reverse logistics systems, involving the integration of waste pickers on the shared responsibility for the life cycle of products. This article aims to measure the impact of such legal incentives and the bargaining power obtained by the volume of collected waste on the effective formalization of waste pickers. The proposed model evaluates the sustainability of supply chains in terms of the use of raw materials due to disposal fees, collection, recycling and return of some materials from desktops and laptops using system dynamics methodology. The results show that even in the absence of bargaining power, the formalization of waste pickers occurs due to legal incentives. It is important to ensure the waste pickers cooperatives access to a minimum amount, which requires a level of protection against unfair competition with companies. Regarding the optimal level of environmental policies, even though the formalization time is long, it is still not enough to guarantee the formalization of waste picker cooperatives, which is dependent on their bargaining power. Steel is the material with the largest decrease in acquisition rate of raw material. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Dos obras del escultor neoclásico inglés John Francis (1780- 1861 en una colección particular española

    Directory of Open Access Journals (Sweden)

    Quintanilla Martínez, Emilio

    2012-09-01

    Full Text Available Two previously unknown works by the British neoclassical sculptor John Francis dating from the second quarter of the 19th century, representing the 1st Duke of Sutherland and, most likely, the sculptor Sir John Francis, have been located in a Spanish private collection.

    Dos obras, hasta ahora inéditas, del escultor neoclásico inglés John Francis del segundo cuarto del siglo XIX, y que representan al primer duque de Sutherland y seguramente al escultor Sir John Francis, en colección privada española.

  17. A Song in the Dark. Francis of Assisi’s Canticle of Brother Sun

    Directory of Open Access Journals (Sweden)

    Speelman Willem Marie

    2016-10-01

    Full Text Available The Canticle of the Creatures or Canticle of Brother Sun is based on a particular way of perceiving reality. Francis, who had turned away from ‘the world’, discovered a different way of looking at it. This is a divine way of perceiving, in which the senses do not grasp reality, but accept it as it communicates itself. This way of perceiving is only possible if one does not attempt to master the environment, but allows one’s senses to be weak. It is significant, therefore, that this song of praise was born at a moment of the utmost despair and weakness. The song’s content is in line with this weak perception: it is not about Francis who praises God and (or for His creatures, but rather it is a testimony that the creatures-the elements-are already praising God, and a prayer that He should let Himself be praised by the creatures. Also in line with this weak perception is the fact that the creatures are praised just as they communicate themselves to Francis: as bodies. The theology of this song is that the creatures through their bodies resonate (strengthen, and colour the blessings that come from God, thereby making His blessing present here on earth. Francis’ role is to give a voice and a language to the heavenly praises as they resound in his environment. The transformative power of this song is that we, whether consciously or not, do the same thing when we participate in this song.

  18. Francis Bacon's Valerius Terminus and the Voyage to the "Great Instauration".

    Science.gov (United States)

    Serjeantson, Richard

    2017-01-01

    Francis Bacon's earliest surviving natural philosophical treatise (composed circa 1603) bears the title Valerius Terminus of the Interpretation of Nature. This study, resting on fresh attention to the surviving authorial manuscript, has three goals. It begins by identifying a lost precursor work apparently entitled "Of Active Knowledge." It then examines the significance of the pseudonyms Bacon chose to introduce his ideas, considering especially his invocation of Erasmus's emblem, the Roman deity Terminus. Finally, it shows how the Valerius Terminus's global vision of contemporary knowledge ultimately helped shape the iconography of Bacon's published Instauratio magna.

  19. The Rule of Three for Prizes in Science and the Bold Triptychs of Francis Bacon.

    Science.gov (United States)

    Goldstein, Joseph L

    2016-09-22

    For many scientific awards, such as Nobels and Laskers, the maximum number of recipients is three. This Rule of Three forces selection committees to make difficult decisions that increase the likelihood of singling out those individuals who open a new field and continue to lead it. The Rule of Three is reminiscent of art's three-panel triptych, a form that the modern master Francis Bacon used to distill complex stories in a bold way. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Stability of the Spanish version of the five-item Francis Scale of Attitude toward Christianity.

    Science.gov (United States)

    Miranda-Tapia, Giskar Alonso; Cogollo, Zuleima; Herazo, Edwin; Campo-Arias, Adalberto

    2010-12-01

    The aim of this study was to establish test-retest reliability of a Spanish version of the Francis Scale of Attitude toward Christianity (Campo-Arias, Oviedo, & Cogollo, 2009) among adolescent students in Cartagena, Colombia. A group of ninth grade students from two public schools in Colombia (N = 157) completed the five-item scale. Cronbach's alphas were .74 and .76 in the first and second administrations, respectively. Both Pearson's rho and intra-class correlation coefficient were .69. A Spanish translation of the 5-item scale had consistent stability over four weeks.

  1. Influence of the rotor-stator interaction on the dynamic stresses of Francis runners

    International Nuclear Information System (INIS)

    Guillaume, R; Scolaro, D; Deniau, J L; Colombet, C

    2012-01-01

    Thanks to advances in computing capabilities and Computational Fluid Dynamics (CFD) techniques, it is now possible to calculate realistic unsteady pressure fields in Francis turbines. This paper will explain methods to calculate the structural loads and the dynamic behaviour in order to optimize the turbine design and maximize its reliability and lifetime. Depending on the operating conditions of a Francis turbine, different hydraulic phenomena may impact the mechanical behaviour of the structure. According to their nature, these highly variable phenomena should be treated differently and specifically in order to estimate the potential risks arising on submerged structures, in particular the runner. The operating condition studied thereafter is the point at maximum power with the maximum head. Under this condition, the runner is excited by only one dynamic phenomenon named the Rotor-Stator Interaction (RSI). The origin of the phenomenon is located on the radial gap of the turbine and is the source of pressure fluctuations. A fluid-structure analysis is performed to observe the influence of that dynamic pressure field on the runner behaviour. The first part of the paper deals with the unsteady fluid computation. The RSI phenomenon is totally unsteady so the fluid simulation must take into account the entire machine and its rotation movement, in order to obtain a dynamic pressure field. In the second part of the paper, a method suitable for the RSI study is developed. It is known that the fluctuating pressure in this gap can be described as a sum of spatial components. By evaluating these components in the CFD results and on the scale model, it is possible to assess the relevance of the numerical results on the whole runner. After this step, the numerical pressure field can be used as the dynamic load of the structure. The final part of the paper presentsthe mechanical finite element calculations. A modal analysis of the runner in water and a harmonic analysis of its

  2. Update of the Picker C9 irradiator control system of the gamma II room of the secondary laboratory of dosimetric calibration

    International Nuclear Information System (INIS)

    Simon S, L. E.

    2016-01-01

    The Picker C9 irradiator is responsible for the calibration of different radiological equipment and the control system that maintains it in operation is designed in the graphical programming software LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench), being its major advantages: the different types of communication, easy interconnection with other software and the recognition of different hardware devices, among others. Operation of the irradiator control system is performed with the NI-Usb-6008 (DAQ) data acquisition module of the National Instruments Company. The purpose of this work is to update the routines that make the Picker C9 control system of the gamma II room of the secondary laboratory of dosimetric calibration, using the graphic programming software LabVIEW, as well as to configure the new acquisition hardware of data that is implemented to control the Picker C9 irradiator system and ensure its operation. (Author)

  3. Effects of Occupational Exposure on the Health of Rag Pickers Due to Fungal Contamination at Waste Dumping Sites in Gwalipor (India

    Directory of Open Access Journals (Sweden)

    Harandra K. Sharma

    2017-02-01

    Full Text Available We investigated fungal contamination near different waste dumping sites and assessed the health risk factors of rag pickers associated with collection of waste in Gwalior during the year 2014-15. Petri plates were exposed at waste dumping sites and were transferred to the laboratory, analysis and identification was mainly carried out by culturing the fungal colonies by following standard procedures. A pretested questionnaire was used to evaluate the health problems among the rag pickers. Results indicated that all the dumping sites are contaminated with different types of fungal pathogens like Alternaria alternate, Aspergillus flavus, A. fumigates, A. niger, Cladosporium, Fusarium, Mucor, Penicillium and Rhizopus. Our study reported higher incidence of musculoskeletal and respiratory diseases among rag pickers. There is also strong need for carrying out similar assessment studies for other cities too. This will entail generation of more precise site specific information regarding fungal species and associated health risk factor.

  4. Effects of Occupational Exposure on the Health of Rag Pickers Due to Fungal Contamination at Waste Dumping Sites in Gwalior (India

    Directory of Open Access Journals (Sweden)

    Harandra K. Sharma

    2017-02-01

    Full Text Available We investigated fungal contamination near different waste dumping sites and assessed the health risk factors of rag pickers associated with collection of waste in Gwalior during the year 2014-15. Petri plates were exposed at waste dumping sites and were transferred to the laboratory, analysis and identification was mainly carried out by culturing the fungal colonies by following standard procedures. A pretested questionnaire was used to evaluate the health problems among the rag pickers. Results indicated that all the dumping sites are contaminated with different types of fungal pathogens like Alternaria alternate, Aspergillus flavus, A. fumigates, A. niger, Cladosporium, Fusarium, Mucor, Penicillium and Rhizopus. Our study reported higher incidence of musculoskeletal and respiratory diseases among rag pickers. There is also strong need for carrying out similar assessment studies for other cities too. This will entail generation of more precise site specific information regarding fungal species and associated health risk factor.

  5. Reverse logistics network for municipal solid waste management: The inclusion of waste pickers as a Brazilian legal requirement.

    Science.gov (United States)

    Ferri, Giovane Lopes; Chaves, Gisele de Lorena Diniz; Ribeiro, Glaydston Mattos

    2015-06-01

    This study proposes a reverse logistics network involved in the management of municipal solid waste (MSW) to solve the challenge of economically managing these wastes considering the recent legal requirements of the Brazilian Waste Management Policy. The feasibility of the allocation of MSW material recovery facilities (MRF) as intermediate points between the generators of these wastes and the options for reuse and disposal was evaluated, as well as the participation of associations and cooperatives of waste pickers. This network was mathematically modelled and validated through a scenario analysis of the municipality of São Mateus, which makes the location model more complete and applicable in practice. The mathematical model allows the determination of the number of facilities required for the reverse logistics network, their location, capacities, and product flows between these facilities. The fixed costs of installation and operation of the proposed MRF were balanced with the reduction of transport costs, allowing the inclusion of waste pickers to the reverse logistics network. The main contribution of this study lies in the proposition of a reverse logistics network for MSW simultaneously involving legal, environmental, economic and social criteria, which is a very complex goal. This study can guide practices in other countries that have realities similar to those in Brazil of accelerated urbanisation without adequate planning for solid waste management, added to the strong presence of waste pickers that, through the characteristic of social vulnerability, must be included in the system. In addition to the theoretical contribution to the reverse logistics network problem, this study aids in decision-making for public managers who have limited technical and administrative capacities for the management of solid wastes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Viscosity of the oil-in-water Pickering emulsion stabilized by surfactant-polymer and nanoparticle-surfactant-polymer system

    Science.gov (United States)

    Sharma, Tushar; Kumar, G. Suresh; Chon, Bo Hyun; Sangwai, Jitendra S.

    2014-11-01

    Information on the viscosity of Pickering emulsion is required for their successful application in upstream oil and gas industry to understand their stability at extreme environment. In this work, a novel formulation of oil-in-water (o/w) Pickering emulsion stabilized using nanoparticle-surfactant-polymer (polyacrylamide) system as formulated in our earlier work (Sharma et al., Journal of Industrial and Engineering Chemistry, 2014) is investigated for rheological stability at high pressure and high temperature (HPHT) conditions using a controlled-strain rheometer. The nanoparticle (SiO2 and clay) concentration is varied from 1.0 to 5.0 wt%. The results are compared with the rheological behavior of simple o/w emulsion stabilized by surfactant-polymer system. Both the emulsions exhibit non-Newtonian shear thinning behavior. A positive shift in this behavior is observed for surfactant-polymer stabilized emulsion at high pressure conditions. Yield stress is observed to increase with pressure for surfactant-polymer emulsion. In addition, increase in temperature has an adverse effect on the viscosity of emulsion stabilized by surfactant-polymer system. In case of nanoparticle-surfactant-polymer stabilized o/w emulsion system, the viscosity and yield stress are predominantly constant for varying pressure and temperature conditions. The viscosity data for both o/w emulsion systems are fitted by the Herschel-Bulkley model and found to be satisfactory. In general, the study indicates that the Pickering emulsion stabilized by nanoparticle-surfactant-polymer system shows improved and stable rheological properties as compared to conventional emulsion stabilized by surfactant-polymer system indicating their successful application for HPHT environment in upstream oil and gas industry.

  7. Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization.

    Science.gov (United States)

    Hang, Hui; Li, Chunxiang; Pan, Jianming; Li, Linzi; Dai, Jiangdong; Dai, Xiaohui; Yu, Ping; Feng, Yonghai

    2013-10-01

    Porous/magnetic molecularly imprinted polymers (PM-MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross-linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as-made PM-MIPs. The characterization demonstrated that the PM-MIPs were porous and magnetic inorganic-polymer composite microparticles with magnetic sensitivity (M(s) = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0-8.0). The PM-MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM-MIPs was well described by pseudo-second-order kinetics, indicating that the chemical process could be the rate-limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM-MIPs for target LC. Moreover, the PM-MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Interfacial rheology of model particles at liquid interfaces and its relation to (bicontinuous) Pickering emulsions

    Science.gov (United States)

    Thijssen, J. H. J.; Vermant, J.

    2018-01-01

    Interface-dominated materials are commonly encountered in both science and technology, and typical examples include foams and emulsions. Conventionally stabilised by surfactants, emulsions can also be stabilised by micron-sized particles. These so-called Pickering-Ramsden (PR) emulsions have received substantial interest, as they are model arrested systems, rather ubiquitous in industry and promising templates for advanced materials. The mechanical properties of the particle-laden liquid-liquid interface, probed via interfacial rheology, have been shown to play an important role in the formation and stability of PR emulsions. However, the morphological processes which control the formation of emulsions and foams in mixing devices, such as deformation, break-up, and coalescence, are complex and diverse, making it difficult to identify the precise role of the interfacial rheological properties. Interestingly, the role of interfacial rheology in the stability of bicontinuous PR emulsions (bijels) has been virtually unexplored, even though the phase separation process which leads to the formation of these systems is relatively simple and the interfacial deformation processes can be better conceptualised. Hence, the aims of this topical review are twofold. First, we review the existing literature on the interfacial rheology of particle-laden liquid interfaces in rheometrical flows, focussing mainly on model latex suspensions consisting of polystyrene particles carrying sulfate groups, which have been most extensively studied to date. The goal of this part of the review is to identify the generic features of the rheology of such systems. Secondly, we will discuss the relevance of these results to the formation and stability of PR emulsions and bijels.

  9. Evolution of CANDU vacuum building and pressure relief structures from Pickering NGS A to Darlington NGS A

    International Nuclear Information System (INIS)

    Beg, Z.M.; Ghosh, R.S.

    1987-01-01

    The vacuum building (VB) and pressure relief structures (PRS) are the unique features of multiple unit CANDU containments. In case of loss-of-coolant accident, the released radionuclides are drawn through the PRS into the subatmospheric VB, doused and contained without being released to the environment. This paper describes the differences in design, configuration and layout of the VB and PRS from Pickering NGS A to Darlington NGS A due to new developments in design concepts and to requirements which have proceeded from the experience gained in both the design and operation of the nuclear stations. (orig.)

  10. AECB staff annual assessment of the Pickering A and B Nuclear Generating Stations for the year 1995

    International Nuclear Information System (INIS)

    1996-06-01

    This report is the Atomic Energy Control Board (AECB) staff assessment of safety at the Pickering Nuclear Generating Station (PNGS-A and PNGS-B) for 1995. Our on-site Project Officers and Ottawa-based specialists monitored the stations throughout the year. In 1995, compliance with the Transportation Packaging of Radioactive Materials Regulations and the Cost Recovery Fees Regulations was satisfactory. The performance of the special safety systems was good. Releases of radioactive materials from the station were low and well below the legal limits for public safety. 10 tabs., 7 figs

  11. A study of wet deposition of atmospheric tritium releases at the Ontario Power Generation, Pickering Nuclear Generating Station

    International Nuclear Information System (INIS)

    Crooks, G.; DeWilde, J.; Yu, L.

    2001-01-01

    The Ontario Power Generation,Pickering Nuclear Generating Station (PNGS) has been investigating deposition of atmospheric releases of tritium on their site. This study has included numerical dispersion modelling studies conducted over the past three years, as well as an ongoing field monitoring study. The following paper will present results of the field monitoring study and make comparisons to the numerical modelling. The results of this study could be of potential use to nuclear stations in quantifying tritium deposition in near field regions where building wake effects dominate pollutant dispersion

  12. Reverse logistics network for municipal solid waste management: The inclusion of waste pickers as a Brazilian legal requirement

    Energy Technology Data Exchange (ETDEWEB)

    Ferri, Giovane Lopes, E-mail: giovane.ferri@aluno.ufes.br [Department of Engineering and Technology, Federal University of Espírito Santo – UFES, Rodovia BR 101 Norte, Km 60, Bairro Litorâneo, São Mateus, ES, 29.932-540 (Brazil); Diniz Chaves, Gisele de Lorena, E-mail: gisele.chaves@ufes.br [Department of Engineering and Technology, Federal University of Espírito Santo – UFES, Rodovia BR 101 Norte, Km 60, Bairro Litorâneo, São Mateus, ES, 29.932-540 (Brazil); Ribeiro, Glaydston Mattos, E-mail: glaydston@pet.coppe.ufrj.br [Transportation Engineering Programme, Federal University of Rio de Janeiro – UFRJ, Centro de Tecnologia, Bloco H, Sala 106, Cidade Universitária, Rio de Janeiro, 21949-900 (Brazil)

    2015-06-15

    Highlights: • We propose a reverse logistics network for MSW involving waste pickers. • A generic facility location mathematical model was validated in a Brazilian city. • The results enable to predict the capacity for screening and storage centres (SSC). • We minimise the costs for transporting MSW with screening and storage centres. • The use of SSC can be a potential source of revenue and a better use of MSW. - Abstract: This study proposes a reverse logistics network involved in the management of municipal solid waste (MSW) to solve the challenge of economically managing these wastes considering the recent legal requirements of the Brazilian Waste Management Policy. The feasibility of the allocation of MSW material recovery facilities (MRF) as intermediate points between the generators of these wastes and the options for reuse and disposal was evaluated, as well as the participation of associations and cooperatives of waste pickers. This network was mathematically modelled and validated through a scenario analysis of the municipality of São Mateus, which makes the location model more complete and applicable in practice. The mathematical model allows the determination of the number of facilities required for the reverse logistics network, their location, capacities, and product flows between these facilities. The fixed costs of installation and operation of the proposed MRF were balanced with the reduction of transport costs, allowing the inclusion of waste pickers to the reverse logistics network. The main contribution of this study lies in the proposition of a reverse logistics network for MSW simultaneously involving legal, environmental, economic and social criteria, which is a very complex goal. This study can guide practices in other countries that have realities similar to those in Brazil of accelerated urbanisation without adequate planning for solid waste management, added to the strong presence of waste pickers that, through the

  13. Reverse logistics network for municipal solid waste management: The inclusion of waste pickers as a Brazilian legal requirement

    International Nuclear Information System (INIS)

    Ferri, Giovane Lopes; Diniz Chaves, Gisele de Lorena; Ribeiro, Glaydston Mattos

    2015-01-01

    Highlights: • We propose a reverse logistics network for MSW involving waste pickers. • A generic facility location mathematical model was validated in a Brazilian city. • The results enable to predict the capacity for screening and storage centres (SSC). • We minimise the costs for transporting MSW with screening and storage centres. • The use of SSC can be a potential source of revenue and a better use of MSW. - Abstract: This study proposes a reverse logistics network involved in the management of municipal solid waste (MSW) to solve the challenge of economically managing these wastes considering the recent legal requirements of the Brazilian Waste Management Policy. The feasibility of the allocation of MSW material recovery facilities (MRF) as intermediate points between the generators of these wastes and the options for reuse and disposal was evaluated, as well as the participation of associations and cooperatives of waste pickers. This network was mathematically modelled and validated through a scenario analysis of the municipality of São Mateus, which makes the location model more complete and applicable in practice. The mathematical model allows the determination of the number of facilities required for the reverse logistics network, their location, capacities, and product flows between these facilities. The fixed costs of installation and operation of the proposed MRF were balanced with the reduction of transport costs, allowing the inclusion of waste pickers to the reverse logistics network. The main contribution of this study lies in the proposition of a reverse logistics network for MSW simultaneously involving legal, environmental, economic and social criteria, which is a very complex goal. This study can guide practices in other countries that have realities similar to those in Brazil of accelerated urbanisation without adequate planning for solid waste management, added to the strong presence of waste pickers that, through the

  14. Interpretation of 131I hippuran renocystogram using vascular invasion segment systemic flow, and DYNA CAMERA II Picker

    International Nuclear Information System (INIS)

    Morcellet, J.L.; Baret, A.

    A quantitative approximation of flows of fluids from each kidney (renal clearances urinary flows), of the hippuran mean stay time into each kidney was proposed. These times are decomposed into cortical transit mean time and into pyelocavities mean stay time. The use of a dual isotope scintillation Dyna Camera II Picker changes the collecting of the data and permits the simultaneous measurement of cardiac output which is required for their treatment. This treatment is carried out by the mean of a videotape recorder which authorizes delayed time work and by the mean of a hundred channels computer, which displays numerical data and their integration [fr

  15. Francis Bacon's natural history and the Senecan natural histories of early modern Europe.

    Science.gov (United States)

    Jalobeanu, Dana

    2012-01-01

    At various stages in his career, Francis Bacon claimed to have reformed and changed traditional natural history in such a way that his new "natural and experimental history" was unlike any of its ancient or humanist predecessors. Surprisingly, such claims have gone largely unquestioned in Baconian scholarship. Contextual readings of Bacon's natural history have compared it, so far, only with Plinian or humanist natural history. This paper investigates a different form of natural history, very popular among Bacon's contemporaries, but yet unexplored by contemporary students of Bacon's works. I have provisionally called this form of natural history'Senecan' natural history, partly because it took shape in the Neo-Stoic revival of the sixteenth-century, partly because it originates in a particular cosmographical reading of Seneca's Naturales quaestiones. I discuss in this paper two examples of Senecan natural history: the encyclopedic and cosmographical projects of Pierre de la Primaudaye (1546-1619) and Samuel Purchas (1577-1626). I highlight a number of similarities between these two projects and Francis Bacon's natural history, and argue that Senecan natural history forms an important aspect in the historical and philosophical background that needs to be taken into consideration if we want to understand the extent to which Bacon's project to reform natural history can be said to be new.

  16. Prediction of Francis Turbine Prototype Part Load Pressure and Output Power Fluctuations with Hydroelectric Model

    Science.gov (United States)

    Alligné, S.; Nicolet, C.; Béguin, A.; Landry, C.; Gomes, J.; Avellan, F.

    2017-04-01

    The prediction of pressure and output power fluctuations amplitudes on Francis turbine prototype is a challenge for hydro-equipment industry since it is subjected to guarantees to ensure smooth and reliable operation of the hydro units. The European FP7 research project Hyperbole aims to setup a methodology to transpose the pressure fluctuations induced by the cavitation vortex rope from the reduced scale model to the prototype generating units. A Francis turbine unit of 444MW with a specific speed value of ν = 0.29, is considered as case study. A SIMSEN model of the power station including electrical system, controllers, rotating train and hydraulic system with transposed draft tube excitation sources is setup. Based on this model, a frequency analysis of the hydroelectric system is performed for all technologies to analyse potential interactions between hydraulic excitation sources and electrical components. Three technologies have been compared: the classical fixed speed configuration with Synchronous Machine (SM) and the two variable speed technologies which are Doubly Fed Induction Machine (DFIM) and Full Size Frequency Converter (FSFC).

  17. Prediction Method for the Complete Characteristic Curves of a Francis Pump-Turbine

    Directory of Open Access Journals (Sweden)

    Wei Huang

    2018-02-01

    Full Text Available Complete characteristic curves of a pump-turbine are essential for simulating the hydraulic transients and designing pumped storage power plants but are often unavailable in the preliminary design stage. To solve this issue, a prediction method for the complete characteristics of a Francis pump-turbine was proposed. First, based on Euler equations and the velocity triangles at the runners, a mathematical model describing the complete characteristics of a Francis pump-turbine was derived. According to multiple sets of measured complete characteristic curves, explicit expressions for the characteristic parameters of characteristic operating point sets (COPs, as functions of a specific speed and guide vane opening, were then developed to determine the undetermined coefficients in the mathematical model. Ultimately, by combining the mathematical model with the regression analysis of COPs, the complete characteristic curves for an arbitrary specific speed were predicted. Moreover, a case study shows that the predicted characteristic curves are in good agreement with the measured data. The results obtained by 1D numerical simulation of the hydraulic transient process using the predicted characteristics deviate little from the measured characteristics. This method is effective and sufficient for a priori simulations before obtaining the measured characteristics and provides important support for the preliminary design of pumped storage power plants.

  18. Dynamic stresses in a Francis model turbine at deep part load

    Science.gov (United States)

    Weber, Wilhelm; von Locquenghien, Florian; Conrad, Philipp; Koutnik, Jiri

    2017-04-01

    A comparison between numerically obtained dynamic stresses in a Francis model turbine at deep part load with experimental ones is presented. Due to the change in the electrical power mix to more content of new renewable energy sources, Francis turbines are forced to operate at deep part load in order to compensate stochastic nature of wind and solar power and to ensure grid stability. For the extension of the operating range towards deep part load improved understanding of the harsh flow conditions and their impact on material fatigue of hydraulic components is required in order to ensure long life time of the power unit. In this paper pressure loads on a model turbine runner from unsteady two-phase computational fluid dynamics simulation at deep part load are used for calculation of mechanical stresses by finite element analysis. Therewith, stress distribution over time is determined. Since only few runner rotations are simulated due to enormous numerical cost, more effort has to be spent to evaluation procedure in order to obtain objective results. By comparing the numerical results with measured strains accuracy of the whole simulation procedure is verified.

  19. A highly efficient Francis turbine designed for energy recovery in cooling towers

    Directory of Open Access Journals (Sweden)

    Daqing Zhou

    2015-03-01

    Full Text Available In China, cooling water entering cooling towers still retains surplus pressure between 39,240 and 147,150 Pa. In order to utilize this wasted energy, it is suggested that the surplus water energy can be harnessed to drive a type of hydroturbine installed in the inner platform of cooling tower and make the fan rotate via its coupled shafts. However, conventional hydroturbines are not suited for this job because of their low efficiency or unmatched rotating speed with that of the fan under the operating conditions of cooling towers. In this article, according to the requirements of turbine work environment in cooling towers, a new type of hydroturbine, Francis turbine with ultra-low specific speed (ns  = 50 m.kW, was designed to replace the fan motor in a cooling tower. Primarily, the shape, position, and number of runner blades were designed and optimized through theoretical analyses and computational fluid dynamics simulations. Additionally, metal elliptical volute and single-row ring guide vanes were applied to scale down the structural dimensions. Finally, the optimal scheme of the new Francis turbine was proven to have a high efficiency of 88% and good operation stability through testing of a physical model and can achieve the goal of harvesting renewable energy in the cooling tower.

  20. Research on Francis Turbine Modeling for Large Disturbance Hydropower Station Transient Process Simulation

    Directory of Open Access Journals (Sweden)

    Guangtao Zhang

    2015-01-01

    Full Text Available In the field of hydropower station transient process simulation (HSTPS, characteristic graph-based iterative hydroturbine model (CGIHM has been widely used when large disturbance hydroturbine modeling is involved. However, by this model, iteration should be used to calculate speed and pressure, and slow convergence or no convergence problems may be encountered for some reasons like special characteristic graph profile, inappropriate iterative algorithm, or inappropriate interpolation algorithm, and so forth. Also, other conventional large disturbance hydroturbine models are of some disadvantages and difficult to be used widely in HSTPS. Therefore, to obtain an accurate simulation result, a simple method for hydroturbine modeling is proposed. By this method, both the initial operating point and the transfer coefficients of linear hydroturbine model keep changing during simulation. Hence, it can reflect the nonlinearity of the hydroturbine and be used for Francis turbine simulation under large disturbance condition. To validate the proposed method, both large disturbance and small disturbance simulations of a single hydrounit supplying a resistive, isolated load were conducted. It was shown that the simulation result is consistent with that of field test. Consequently, the proposed method is an attractive option for HSTPS involving Francis turbine modeling under large disturbance condition.

  1. Velocity and pressure measurements in guide vane clearance gap of a low specific speed Francis turbine

    Science.gov (United States)

    Thapa, B. S.; Dahlhaug, O. G.; Thapa, B.

    2016-11-01

    In Francis turbine, a small clearance gap between the guide vanes and the cover plates is usually required to pivot guide vanes as a part of governing system. Deflection of cover plates and erosion of mating surfaces causes this gap to increase from its design value. The clearance gap induces the secondary flow in the distributor system. This effects the main flow at the runner inlet, which causes losses in efficiency and instability. A guide vane cascade of a low specific speed Francis turbine has been developed for experimental investigations. The test setup is able to produce similar velocity distributions at the runner inlet as that of a reference prototype turbine. The setup is designed for particle image velocimetry (PIV) measurements from the position of stay vane outlet to the position of runner inlet. In this study, velocity and pressure measurements are conducted with 2 mm clearance gap on one side of guide vane. Leakage flow is observed and measured together with pressure measurements. It is concluded that the leakage flow behaves as a jet and mixes with the main flow in cross-wise direction and forms a vortex filament. This causes non-uniform inlet flow conditions at runner blades.

  2. On the performance of a high head Francis turbine at design and off-design conditions

    International Nuclear Information System (INIS)

    Aakti, B; Amstutz, O; Casartelli, E; Romanelli, G; Mangani, L

    2015-01-01

    In the present paper, fully 360 degrees transient and steady-state simulations of a Francis turbine were performed at three operating conditions, namely at part load (PL), best efficiency point (BEP), and high load (HL), using different numerical approaches for the pressure-velocity coupling. The simulation domain includes the spiral casing with stay and guide vanes, the runner and the draft tube. The main target of the investigations is the numerical prediction of the overall performance of the high head Francis turbine model as well as local and integral quantities of the complete machine in different operating conditions. All results were compared with experimental data published by the workshop organization. All CFD simulations were performed at model scale with a new in-house, 3D, unstructured, object-oriented finite volume code within the framework of the open source OpenFOAM library. The novel fully coupled pressure-based solver is designed to solve the incompressible RANS- Equations and is capable of handling multiple references of frame (MRF). The obtained results show that the overall performance is well captured by the simulations. Regarding the local flow distributions within the inlet section of the draft-tube, the axial velocity is better estimated than the circumferential component

  3. Study on stress characteristics of Francis hydraulic turbine runner based on two-way FSI

    International Nuclear Information System (INIS)

    Zhu, W R; Xiao, R F; Yang, W; Wang, F J; Liu, J

    2012-01-01

    In recent years, cracking phenomenon occurs in many large-sized turbines both nationally and internationally, which has threatened the stable operation of hydraulic turbines. Consequently, Stress characteristics calculation and analysis of a Francis hydraulic turbine runner by application of fluid-structure interaction (FSI) technology become significantly important. In order to introduce two-way coupling technology to hydraulic machinery, two-way FSI technology is applied in this article to calculate and analyze stress characteristics. Through coordinate system transformation, the continuity equations and Navier-Stokes equations in the Cartesian coordinates system are firstly transformed to ALE coordinates system. The fluid field control equations are then constructed and discrete equations can be obtained by using flow-condition-based interpolation (FBIC-C). The structure static mechanics equations used are established in rotation coordinate system, and modeled with the finite method. Two-way coupling is computed by using iteration method. The fluid equations and structure equations are iterated until coupling coefficients converge. According to structure result, the maximum stress, displacement as well as its location can be found. As a result, the most easily wear position can be discovered which provides valuable basis for optimized design and stable operation of Francis hydraulic turbines. After comparing the results with that of one-way coupling, it is discovered that displacements is the key factors which affects the results of one-way and two-way coupling.

  4. On the centenary of the birth of Francis H. C. Crick – from physics to genetics and neuroscience

    Directory of Open Access Journals (Sweden)

    Hélio A. G. Teive

    2016-04-01

    Full Text Available ABSTRACT The year 2016 marks the centenary of the birth of Francis Crick (1916–2004, who made outstanding contributions to genetics and neuroscience. In 1953, in a collaborative study, Francis Crick and James Watson discovered the DNA double helix, and in 1962 they and Maurice Wilkins were awarded the Noble Prize in Physiology or Medicine. Crick subsequently became very interested in neuroscience, particularly consciousness and its relationship to the claustrum, a small gray matter structure between the insula and putamen.

  5. Temporal stability of the Francis Scale of Attitude toward Christianity short-form: test-retest data over one week.

    Science.gov (United States)

    Lewis, Christopher Alan; Cruise, Sharon Mary; McGuckin, Conor

    2005-04-01

    This study evaluated the test-retest reliability of the Francis Scale of Attitude toward Christianity short-form. 39 Northern Irish undergraduate students completed the measure on two occasions separated by one week. Stability across the two administrations was high, r = .92, and there was no significant change between Time 1(M = 25.2, SD = 5.4) and Time 2 (M = 25.7, SD = 6.2). These data support the short-term test-retest reliability of the Francis Scale of Attitude toward Christianity short-form.

  6. Pickering emulsion stabilized by cashew gum- poly-l-lactide copolymer nanoparticles: Synthesis, characterization and amphotericin B encapsulation.

    Science.gov (United States)

    Richter, A R; Feitosa, J P A; Paula, H C B; Goycoolea, F M; de Paula, R C M

    2018-04-01

    In this work, we provide proof-of-concept of formation, physical characteristics and potential use as a drug delivery formulation of Pickering emulsions (PE) obtained by a novel method that combines nanoprecipitation with subsequent spontaneous emulsification process. To this end, pre-formed ultra-small (d.∼10 nm) nanoprecipitated nanoparticles of hydrophobic derivatives of cashew tree gum grafted with polylactide (CGPLAP), were conceived to stabilize Pickering emulsions obtained by spontaneous emulsification. These were also loaded with Amphotericin B (AmB), a drug of low oral bioavailability used in the therapy of neglected diseases such as leishmaniasis. The graft reaction was performed in two CG/PLA molar ratio conditions (1:1 and 1:10). Emulsions were prepared by adding the organic phase (Miglyol 812 ® ) in the aqueous phase (nanoprecipitated CGPLAP), resulting the immediate emulsion formation. The isolation by centrifugation does not destabilize or separate the nanoparticles from oil droplets of the PE emulsion. Emulsions with CGPLAP 1:1 presented unimodal distributions at different CGPLA concentration, lower values in size and PDI and the best stability over time. The AmB was incorporated in the emulsions with a process efficiency of 21-47%, as determined by UV-vis. AmB in CGPLAP emulsions is in less aggregated state than observed in commercial AmB formulation. Copyright © 2018 Elsevier B.V. All rights reserved.

  7. Ring thermal shield piping modification at Pickering Nuclear Generating Station 'A' Unit 1

    International Nuclear Information System (INIS)

    Brown, R.; Cobanoglu, M.M.

    1995-01-01

    Each of the four Pickering Nuclear Generating Station A (PNGSA) CANDU units was constructed with its reactor and dump tank surrounded by a concrete Calandria Vault (CV). The Ring Thermal Shield (RTS) system at PNGSA units is a water cooled structure with internal cooling channels with the purpose of attenuating excessive heat flux from the calandria shell to the end shield rings and adjoining concrete (Figure 1). In newer CANDU units the reactor calandria vessel is surrounded by a large water filled shield tank which eliminates the requirement for the RTS system. The RTS structures are situated in the space between the calandria and the vault walls. Each RTS is assembled from eight flat sided carbon steel segments, tilted towards the calandria and supported from the end shield rings. Cooling water to the RTS is supplied by carbon steel cooling pipes with a portion of the pipe run embedded in the vault walls. Flow through each RTS is divided into two independent circuits, having an inlet and an outlet cooling line. There are four locations of RTS inlet and outlet cooling lines. The inlet lines are located at the bottom and the outlet lines at the top of the RTS. The 'L' shaped section of RTS inlet and outlet cooling lines, from the RTS waterbox to the start of embedded portion at the concrete wall, had become defective due to corrosion induced by excessive Moisture levels in the calandria vaults. An on-line leak sealing capability was developed and placed in service in all four PNGSA units. However, a leak found during the 1994 Unit 1 outage was too large,to seal with the current capability, forcing Ontario Hydro (OH) to develop a method to replace the corroded pipes. The repair project was subject to some lofty performance targets. All tools had to be able to withstand dose rates of up to 3000 Rem/hour. These tools, along with procedures and personnel had to successfully repair the RTS system within 6 months otherwise a costly outage extension would result. This

  8. Exploring the role of picker personality in predicting picking performance with pick by voice, pick to light and RF-terminal picking

    NARCIS (Netherlands)

    de Vries, J.; de Koster, R.; Stam, D.

    2016-01-01

    Order pickers and individual differences between them could have a substantial impact on picking performance, but are largely ignored in studies on order picking. This paper explores the role of individual differences in picking performance with various picking tools (pick by voice, RF-terminal

  9. Waste picker livelihoods and inclusive neoliberal municipal solid waste management policies: The case of the La Chureca garbage dump site in Managua, Nicaragua.

    Science.gov (United States)

    Hartmann, Chris

    2018-01-01

    The modernization (i.e. mechanization, formalization, and capital intensification) and enclosure of municipal solid waste management (MSWM) systems threaten waste picker livelihoods. From 2009 to 2013, a major development project, embodying traditional neoliberal policies with inclusive social policies, transformed the Managua, Nicaragua, municipal solid waste site from an open-air dump where as many as 2,000 informal waste pickers toiled to a sanitary landfill. To investigate waste pickers' social and economic condition, including labor characteristics, household income, and poverty incidence, after the project's completion, 146 semi-structured survey questionnaires were administered to four communities adjacent to the landfill and 45 semi-structured interviews were completed with key stakeholders. Findings indicate that hundreds of waste pickers were displaced by the project, employment benefits from the project were unevenly distributed by neighborhood, and informal waste picking endures due to persistent impoverishment, thereby contributing to continued social and economic marginalization and environmental degradation. The findings highlight the limitations of inclusive neoliberal development efforts to transform MSWM in a low-income country. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Preparation of stable Pickering emulsions with short, medium and long chain fats and starch nanocrystals and their in vitro digestion properties

    Science.gov (United States)

    Pickering emulsions are receiving more attention as delivery systems in food and pharmaceuticals because they can be formulated with nontoxic food ingredients to form stable emulsions. In this study, 40-100 nm starch nanocrystals (SNCs) prepared from acid hydrolysis of waxy maize starches were used ...

  11. Aesthetic of the subversion and the violence in Francis Bacon and Frida Kahlo’s WorKs of Art

    Directory of Open Access Journals (Sweden)

    Catarina Pinheiro

    2014-06-01

    Full Text Available Having Frida Kahlo and Francis Bacon ́s work as a starting point, the authors discuss the dimensions of violence and trauma present in their creative forms and on the impact produced on the spectator. They also reflect on its connections with the clinic on the impact/countertransference phenomenon and its transformational possibilities.

  12. Internal consistency reliability and construct validity of the Dutch translation of the Francis Scale of Attitude toward Christianity among adolescents.

    Science.gov (United States)

    Francis, L J; Hermans, C A

    2000-02-01

    A sample of 1,021 young people attending Years 7, 8, 9, 10, and 11 at Catholic secondary schools within the state-maintained sector completed the Dutch translation of the Francis Scale of Attitude toward Christianity. The data support its reliability and validity and commend it for further use in studies conducted among young people in The Netherlands.

  13. Aesthetic of the subversion and the violence in Francis Bacon and Frida Kahlo’s WorKs of Art

    OpenAIRE

    Pinheiro, Catarina; Dias, Maria João; Rosa, Alda

    2009-01-01

    Having Frida Kahlo and Francis Bacon ́s work as a starting point, the authors discuss the dimensions of violence and trauma present in their creative forms and on the impact produced on the spectator. They also reflect on its connections with the clinic on the impact/countertransference phenomenon and its transformational possibilities.

  14. Aesthetic of the subversion and the violence in Francis Bacon and Frida Kahlo’s WorKs of Art

    OpenAIRE

    Catarina Pinheiro; Maria João Dias; Alda Rosa

    2014-01-01

    Having Frida Kahlo and Francis Bacon ́s work as a starting point, the authors discuss the dimensions of violence and trauma present in their creative forms and on the impact produced on the spectator. They also reflect on its connections with the clinic on the impact/countertransference phenomenon and its transformational possibilities.

  15. Measuring Attitude toward Theistic Faith: Assessing the Astley-Francis Scale among Christian, Muslim and Secular Youth in England

    Science.gov (United States)

    Francis, Leslie J.; Brockett, Adrian; Village, Andrew

    2013-01-01

    Alongside a family of instruments designed to measure the attitudinal dimension of religion within specific faith contexts (Christianity, Hinduism, Islam, and Judaism), the Astley-Francis Scale of Attitude toward Theistic Faith was designed to assess the attitudinal dimension of religion within a multifaith context. Drawing on a sample of 4338…

  16. Pickering NGS A reactor building 1 dome refurbishment long-term monitoring of coating

    International Nuclear Information System (INIS)

    Deans, J.J.; Chan, P.; Gomme, R.

    2006-01-01

    'Full text:' To reduce air leakage through the dome of Pickering NGS A Reactor Building 1, in August 1993 a portion of the exterior concrete surface was coated with a single component elastomeric polyurethane material. An internal positive pressure test of the building, conducted between November 5 and 7, 1993, found that the air leakage rates were significantly lower in this test than leakage rates which had been measured during a pressure test conducted in 1992. This reduction in leakage was attributed to the successful performance of the coating. The need for a high-performance, elastomeric surface coating was identified for reduction of air leakage levels through the dome of Reactor Building l of Ontario Power Generation's (formerly Ontario Hydro's) Pickering 'A' Nuclear Generating Station near Toronto. A number of candidate coatings were extensively tested to assess the performance characteristics and identify a material that could withstand the elements and perform effectively for around 20 years. Under normal operating conditions, a licensing limit of 2.7% of contained mass/hour is set for permissible containment leakage whilst the operational working target is less than 1%. The facility's engineers determined that any leakages were pressure-dependent, so in an effort to remain well within their working target, they sought a system that would bridge and seal any hairline cracks in the concrete dome and thereby prevent the passage of gas or vapour through the substrate. On the basis of scheduling and cost, they concluded that a high performance coating was most appropriate for the project, and hired Kinectrics (formerly Ontario Hydro Technologies (OHT)) to select, test, assess and arrange for the application to the RB 1 Dome. In all, nearly 70 separate manufacturers were approached by Kinectrics with a view to obtaining recommendations for treatment. The respective performance data of the respondents' products were compared with a set of specific design

  17. Francis Bacon's concept of objectivity and the idols of the mind.

    Science.gov (United States)

    Zagorin, P

    2001-12-01

    This paper examines the concept of objectivity traceable in Francis Bacon's natural philosophy. After some historical background on this concept, it considers the question of whether it is not an anachronism to attribute such a concept to Bacon, since the word 'objectivity' is a later coinage and does not appear anywhere in his writings. The essay gives reasons for answering this question in the negative, and then criticizes the accounts given of Bacon's understanding of objectivity by Lorraine Daston and Julie Robin Solomon. It argues that this understanding is most directly and fully expressed in his discussion of the idols of the mind. In this connection, the paper notes Bacon's critical attitude to sixteenth-century scepticism and its relevance to the idea of objectivity implicit in his comments on the idols. In conclusion, the paper argues that Bacon was not a pure empiricist and describes the place assigned to theories and hypotheses in his natural philosophy.

  18. Images of trauma: pain, recognition, and disavowal in the works of Frida Kahlo and Francis Bacon.

    Science.gov (United States)

    Bose, Joerg

    2005-01-01

    The role of art in the encounter with trauma and destructiveness is comparatively studied in the works of Frida Kahlo and Francis Bacon as examples of a direct and a more indirect way of dealing with such experiences. A creative product may function intrapsychically as a kind of messenger between dissociated self-states and consciousness, and it may also serve as a witnessing presence in a self-supporting and self-constituting way. Artistic work may thus be used by the artist for an expressive as well as for a protective purpose, as a means of sympathetic participation in painful experience, or as a medium for a view from the outside. The act itself of finding and of making expressive forms at the time of traumatic experience is a remarkable assertion of the human capability to synthesize and to counteract fragmenting dissociative processes.

  19. Special article: Francis Hoeffer McMechan, MD: creator of modern anesthesiology?

    Science.gov (United States)

    Bacon, Douglas R

    2012-12-01

    If one person can be credited with the creation of the infrastructure of modern anesthesiology, that individual would be Francis Hoeffer McMechan. He has been largely forgotten since his death in 1939 despite his remarkable and enduring accomplishments. McMechan edited the first national journal devoted to anesthesiology, created and managed almost all of the national and regional societies devoted to the specialty between 1912 and his death, and created the first international physician certification as a specialist in anesthesiology. His accomplishments are even more amazing given the severe arthritis that left him wheelchair-bound for almost his entire professional life and denied him the ability to practice anesthesia. Our specialty owes an incredible debt to this largely unknown and unsung hero.

  20. Scanning-PIXE analysis of gold lace embroideries in a relic of St. Francis

    Energy Technology Data Exchange (ETDEWEB)

    Migliori, A. [Dipartimento di Fisica dell' Universita and Istituto Nazionale di Fisica Nucleare, Firenze, Via G. Sansone 1, 50019 Sesto Fiorentino (Firenze) (Italy)], E-mail: migliori@fi.infn.it; Grassi, N.; Mando, P.A. [Dipartimento di Fisica dell' Universita and Istituto Nazionale di Fisica Nucleare, Firenze, Via G. Sansone 1, 50019 Sesto Fiorentino (Firenze) (Italy)

    2008-05-15

    In this work, we describe the compositional analysis performed by scanning-mode PIXE on the metal threads of a XIII century embroidery. The precious work analysed is the pillow-case used to cover the pillow, on which - according to tradition - St. Francis of Assisi was resting his head when he died. Measurements were performed in order to characterise the embroideries of the two sides and the passementerie in the lateral hems. Several areas, each of the order of two square millimetres, were scanned with a 3 MeV proton external beam of 20 {mu}m size on target, using the external micro-beam facility of our laboratory, with list-mode acquisition. Analysis of elemental maps and spectra from selected homogeneous sub-areas allowed us to extract the quantitative composition of the gilded tape and estimates of its thickness.

  1. Scanning-PIXE analysis of gold lace embroideries in a relic of St. Francis

    International Nuclear Information System (INIS)

    Migliori, A.; Grassi, N.; Mando, P.A.

    2008-01-01

    In this work, we describe the compositional analysis performed by scanning-mode PIXE on the metal threads of a XIII century embroidery. The precious work analysed is the pillow-case used to cover the pillow, on which - according to tradition - St. Francis of Assisi was resting his head when he died. Measurements were performed in order to characterise the embroideries of the two sides and the passementerie in the lateral hems. Several areas, each of the order of two square millimetres, were scanned with a 3 MeV proton external beam of 20 μm size on target, using the external micro-beam facility of our laboratory, with list-mode acquisition. Analysis of elemental maps and spectra from selected homogeneous sub-areas allowed us to extract the quantitative composition of the gilded tape and estimates of its thickness

  2. Scanning-PIXE analysis of gold lace embroideries in a relic of St. Francis

    Science.gov (United States)

    Migliori, A.; Grassi, N.; Mandò, P. A.

    2008-05-01

    In this work, we describe the compositional analysis performed by scanning-mode PIXE on the metal threads of a XIII century embroidery. The precious work analysed is the pillow-case used to cover the pillow, on which - according to tradition - St. Francis of Assisi was resting his head when he died. Measurements were performed in order to characterise the embroideries of the two sides and the passementerie in the lateral hems. Several areas, each of the order of two square millimetres, were scanned with a 3 MeV proton external beam of 20 μm size on target, using the external micro-beam facility of our laboratory, with list-mode acquisition. Analysis of elemental maps and spectra from selected homogeneous sub-areas allowed us to extract the quantitative composition of the gilded tape and estimates of its thickness.

  3. Adam Smith e Francis Ysidro Edgeworth: uma crítica do utilitarismo

    Directory of Open Access Journals (Sweden)

    Solange Regina Marin

    2012-01-01

    Full Text Available Sugerimos, nesse trabalho, a investigação das concepções de Adam Smith e a de Francis Ysidro Edgeworth do utilitarismo. Ambas as concepções foram utilizadas para desenvolver a Ciência Econômica. Porém, também apresentaram as limitações da teoria econômica, cujas fronteiras vislumbradas pelos autores remetem para a necessidade de avaliar as ações e condutas humanas com teoria moral diferente do utilitarismo. Entendemos que a teoria moral de Adam Smith, esquecida pela história do pensamento econômico, se apresenta como alternativa e, em decorrência, uma ideia promissora para aperfeiçoar o estudo das ações e condutas ditas econômicas.

  4. Unsteady hydraulic simulation of the cavitating part load vortex rope in Francis turbines

    Science.gov (United States)

    Brammer, J.; Segoufin, C.; Duparchy, F.; Lowys, P. Y.; Favrel, A.; Avellan, F.

    2017-04-01

    For Francis turbines at part load operation a helical vortex rope is formed due to the swirling nature of the flow exiting the runner. This vortex creates pressure fluctuations which can lead to power swings, and the unsteady loading can lead to fatigue damage of the runner. In the case that the vortex rope cavitates there is the additional risk that hydro-acoustic resonance can occur. It is therefore important to be able to accurately simulate this phenomenon to address these issues. In this paper an unsteady, multi-phase CFD model was used to simulate two part-load operating points, for two different cavitation conditions. The simulation results were validated with test-rig data, and showed very good agreement. These results also served as an input for FEA calculations and fatigue analysis, which are presented in a separate study.

  5. Classics in psychiatry and the law: Francis Wharton on involuntary confessions.

    Science.gov (United States)

    Weiss, Kenneth J

    2012-01-01

    Philadelphia attorney Francis Wharton was a key intellectual figure in linking the sciences of medicine and law. In 1860, he published a monograph on involuntary confessions, which represented the closing chapter of Wharton and Stillé's Treatise on Medical Jurisprudence. He had already published A Monograph on Mental Unsoundness in 1855, the first book of the Treatise in its first edition. Wharton was convinced that many criminals had an inner compulsion to confess or to be caught, explained as divine jurisprudence. His remarks on confessions include a typology spanning psychodynamics to police tactics, using contemporaneous, historical, and literary examples. This remarkable document provides insight into the dynamics of unintended and involuntary confessions and is compatible, in part, with current scholarship. The author contrasts Wharton's schema with those of his English predecessor Jeremy Bentham, the psychoanalyst Theodore Reik, and others, and concludes that it represents an important transition toward a psychological approach to the criminology of confessions.

  6. From political economy to sociology: Francis Galton and the social-scientific origins of eugenics.

    Science.gov (United States)

    Renwick, Chris

    2011-09-01

    Having coined the word 'eugenics' and inspired leading biologists and statisticians of the early twentieth century, Francis Galton is often studied for his contributions to modern statistical biology. However, whilst documenting this part of his work, historians have frequently neglected crucial aspects of what motivated Galton to establish his eugenics research programme. Arguing that his work was shaped more by social than by biological science, this paper addresses these oversights by tracing the development of Galton's programme, from its roots in a debate about political economy to his appeals for it to be taken up by sociologists. In so doing, the paper not only returns Galton's ideas to their original context but also provides a reason to reflect on the place of the social sciences in history-of-science scholarship.

  7. Modelling and Internal Fuzzy Model Power Control of a Francis Water Turbine

    Directory of Open Access Journals (Sweden)

    Klemen Nagode

    2014-02-01

    Full Text Available This paper presents dynamic modelling of a Francis turbine with a surge tank and the control of a hydro power plant (HPP. Non-linear and linear models include technical parameters and show high similarity to measurement data. Turbine power control with an internal model control (IMC is proposed, based on a turbine fuzzy model. Considering appropriate control responses in the entire area of turbine power, the model parameters of the process are determined from a fuzzy model, which are further included in the internal model controller. The results are compared to a proportional-integral (PI controller tuned with an integral absolute error (IAE objective function, and show an improved response of internal model control.

  8. A world in one dimension: Linus Pauling, Francis Crick and the central dogma of molecular biology.

    Science.gov (United States)

    Strasser, Bruno J

    2006-01-01

    In 1957, Francis Crick outlined a startling vision of life in which the great diversity of forms and shapes of macromolecules was encoded in the one-dimensional sequence of nucleic acids. This paper situates Crick's new vision in the debates of the 1950s about protein synthesis and gene action. After exploring the reception of Crick's ideas, it shows how they differed radically from a different model of protein synthesis which enjoyed wide currency in that decade. In this alternative model, advocated by Linus Pauling and other luminaries, three-dimensional templates directed the folding of proteins. Even though it was always considered somewhat speculative, this theory was supported by a number of empirical results originating in different experimental systems. It was eventually replaced by a model in which the forms and shapes of macromolecules resulted solely from their amino acid sequence, dramatically simplifying the problem of protein synthesis which Crick was attempting to solve in 1957.

  9. Numerical investigation of flow structure and pressure pulsation in the Francis-99 turbine during startup

    Science.gov (United States)

    Minakov, A.; Sentyabov, A.; Platonov, D.

    2017-01-01

    We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at startup regimes. Numerical technique for calculating of low frequency pressure pulsations in a water turbine is based on the use of DES (k-ω Shear Stress Transport) turbulence model and the approach of “frozen rotor”. The structure of the flow behind the runner of turbine was analysed. Shows the effect of flow structure on the frequency and intensity of non-stationary processes in the flow path. Two version of the inlet boundary conditions were considered. The first one corresponded measured time dependence of the discharge. Comparison of the calculation results with the experimental data shows the considerable delay of the discharge in this calculation. Second version corresponded linear approximation of time dependence of the discharge. This calculation shows good agreement with experimental results.

  10. The Southern Society for Philosophy and Psychology and Francis Cecil Sumner.

    Science.gov (United States)

    Thomas, Roger K

    2011-01-01

    In 1939, a psychologist could become a member of the Southern Society for Philosophy and Psychology (SSPP) automatically with the endorsement of two members, payment of dues, and membership in the American Psychological Association (APA). Non-APA members with endorsements and payment of dues had to be voted in by the membership. In 1940, the rules for admission were changed to eliminate the automatic membership for APA members. Francis Cecil Sumner, the first African American PhD in psychology, qualified for SSPP membership as a member of the APA in 1939, but the SSPP's council delayed his membership and introduced the amendment to its constitution that eliminated Sumner's route to membership. This article examines the circumstances surrounding council's actions and the role that Sumner's application for membership played in it as an example of the role that race and discrimination played in the decision to change the route to SSPP membership for members of the APA.

  11. The Welcoming Pope: Images of Pope Francis in the Catholicism under mediatization

    Directory of Open Access Journals (Sweden)

    Tatiane MILANI

    2017-12-01

    Full Text Available In the context of the society in mediatization more and more the social fields are inserted in an ambiance in which borders are constantly tensioned, meaning that social practices are crossed by the logic of other fields, rather than their own place of knowing. It is perceived that the social/political/religious conjuncture interpenetrates with the logic of mediatization, and this phenomenon arouses transformations in all Christianity. The objective of this work is to analyze the circulation of Pope Francis' images in the media which formulate, in the collective imaginary, a mediated totem image of the Pope of embrace or of the welcoming Pope, what adheres to the new media technologies.

  12. On the upper part load vortex rope in Francis turbine: Experimental investigation

    International Nuclear Information System (INIS)

    Nicolet, C; Zobeiri, A; Maruzewski, P; Avellan, F

    2010-01-01

    The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and

  13. On the upper part load vortex rope in Francis turbine: Experimental investigation

    Energy Technology Data Exchange (ETDEWEB)

    Nicolet, C [Power Vision Engineering sarl Ch. des Champs-Courbes 1, CH-1024 Ecublens (Switzerland); Zobeiri, A; Maruzewski, P; Avellan, F, E-mail: christophe.nicolet@powervision-eng.c [Laboratory for Hydraulic Machines, Ecole polytechnique federale de Lausanne, EPFL Av. de Cour 33bis, CH-1007 Lausanne (Switzerland)

    2010-08-15

    The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and

  14. On the upper part load vortex rope in Francis turbine: Experimental investigation

    Science.gov (United States)

    Nicolet, C.; Zobeiri, A.; Maruzewski, P.; Avellan, F.

    2010-08-01

    The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and

  15. Prediction of a Francis turbine prototype full load instability from investigations on the reduced scale model

    Science.gov (United States)

    Alligné, S.; Maruzewski, P.; Dinh, T.; Wang, B.; Fedorov, A.; Iosfin, J.; Avellan, F.

    2010-08-01

    The growing development of renewable energies combined with the process of privatization, lead to a change of economical energy market strategies. Instantaneous pricings of electricity as a function of demand or predictions, induces profitable peak productions which are mainly covered by hydroelectric power plants. Therefore, operators harness more hydroelectric facilities at full load operating conditions. However, the Francis Turbine features an axi-symmetric rope leaving the runner which may act under certain conditions as an internal energy source leading to instability. Undesired power and pressure fluctuations are induced which may limit the maximum available power output. BC Hydro experiences such constraints in a hydroelectric power plant consisting of four 435 MW Francis Turbine generating units, which is located in Canada's province of British Columbia. Under specific full load operating conditions, one unit experiences power and pressure fluctuations at 0.46 Hz. The aim of the paper is to present a methodology allowing prediction of this prototype's instability frequency from investigations on the reduced scale model. A new hydro acoustic vortex rope model has been developed in SIMSEN software, taking into account the energy dissipation due to the thermodynamic exchange between the gas and the surrounding liquid. A combination of measurements, CFD simulations and computation of eigenmodes of the reduced scale model installed on test rig, allows the accurate calibration of the vortex rope model parameters at the model scale. Then, transposition of parameters to the prototype according to similitude laws is applied and stability analysis of the power plant is performed. The eigenfrequency of 0.39 Hz related to the first eigenmode of the power plant is determined to be unstable. Predicted frequency of the full load power and pressure fluctuations at the unit unstable operating point is found to be in general agreement with the prototype measurements.

  16. Prediction of a Francis turbine prototype full load instability from investigations on the reduced scale model

    International Nuclear Information System (INIS)

    Alligne, S; Maruzewski, P; Avellan, F; Dinh, T; Wang, B; Fedorov, A; Iosfin, J

    2010-01-01

    The growing development of renewable energies combined with the process of privatization, lead to a change of economical energy market strategies. Instantaneous pricings of electricity as a function of demand or predictions, induces profitable peak productions which are mainly covered by hydroelectric power plants. Therefore, operators harness more hydroelectric facilities at full load operating conditions. However, the Francis Turbine features an axi-symmetric rope leaving the runner which may act under certain conditions as an internal energy source leading to instability. Undesired power and pressure fluctuations are induced which may limit the maximum available power output. BC Hydro experiences such constraints in a hydroelectric power plant consisting of four 435 MW Francis Turbine generating units, which is located in Canada's province of British Columbia. Under specific full load operating conditions, one unit experiences power and pressure fluctuations at 0.46 Hz. The aim of the paper is to present a methodology allowing prediction of this prototype's instability frequency from investigations on the reduced scale model. A new hydro acoustic vortex rope model has been developed in SIMSEN software, taking into account the energy dissipation due to the thermodynamic exchange between the gas and the surrounding liquid. A combination of measurements, CFD simulations and computation of eigenmodes of the reduced scale model installed on test rig, allows the accurate calibration of the vortex rope model parameters at the model scale. Then, transposition of parameters to the prototype according to similitude laws is applied and stability analysis of the power plant is performed. The eigenfrequency of 0.39 Hz related to the first eigenmode of the power plant is determined to be unstable. Predicted frequency of the full load power and pressure fluctuations at the unit unstable operating point is found to be in general agreement with the prototype measurements.

  17. Update of the Picker C9 irradiator control system of the gamma II room of the secondary laboratory of dosimetric calibration; Actualizacion del sistema de control del irradiador Picker C9 de la sala gamma II del laboratorio secundario de calibracion dosimetrica

    Energy Technology Data Exchange (ETDEWEB)

    Simon S, L. E.

    2016-07-01

    The Picker C9 irradiator is responsible for the calibration of different radiological equipment and the control system that maintains it in operation is designed in the graphical programming software LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench), being its major advantages: the different types of communication, easy interconnection with other software and the recognition of different hardware devices, among others. Operation of the irradiator control system is performed with the NI-Usb-6008 (DAQ) data acquisition module of the National Instruments Company. The purpose of this work is to update the routines that make the Picker C9 control system of the gamma II room of the secondary laboratory of dosimetric calibration, using the graphic programming software LabVIEW, as well as to configure the new acquisition hardware of data that is implemented to control the Picker C9 irradiator system and ensure its operation. (Author)

  18. Radiological pathways analysis for spent solvents from the boiler chemical cleaning at the Pickering Nuclear Site

    International Nuclear Information System (INIS)

    Garisto, N.C.; Eslami, Z.; Hodgins, S.; Beaman, T.; Von Svoboda, S.; Marczak, J.

    2006-01-01

    Spent solvents are generated as a result of Boiler Chemical Cleanings (BCC) at CANDU reactor sites. These solutions contain small amount of radioactivity from a number of different sources including: Cut tubes - short sections of boiler tubes are infrequently removed from the boilers for a detailed characterization. These tubes are typically only plugged at the tubesheet allowing the primary side deposits to be exposed to BCC solvents. Tube leaks - primary to secondary side leaks also occur infrequently as a result of tube degradation. Radioactivity from the leaking fluid can consequently be deposited in the sludge on the secondary side of the tubes. Diffusion of tritium - during normal operation of the reactor units, tritium slowly diffuses from the heavy water in the primary heat-transfer system to the light-water coolant on the secondary side. Some of this tritium is retained in the secondary side deposits. The Pickering Nuclear Generating Station (PNGS) would like the flexibility to have several options for handling the spent solvent waste and associated rinse water from BCC. To this end, a radiological pathways analysis was undertaken to determine dose consequences associated with each option. Sample results from this study are included in this paper. The pathways analysis is used in this study to calculate dose to hypothetical receptors including individuals such as truck drivers, incinerator workers, residue (ash) handlers, residents who live near the landfill, inadvertent intruders into the landfill after closure and residents who live near the outfall. This dose is compared to a de minimis dose. A de minimis dose or dose rate represents a level of risk, which is generally accepted as being of no significance. Shipments of spent solvents and rinse water with corresponding doses below de minimis can be sent to conventional (i.e., non-radioactive) landfills for incineration and disposal as the radioactive dose associated with them is much less than natural

  19. Automated phase picker and source location algorithm for local distances using a single three component seismic station

    International Nuclear Information System (INIS)

    Saari, J.

    1989-12-01

    The paper describes procedures for automatic location of local events by using single-site, three-component (3c) seismogram records. Epicentral distance is determined from the time difference between P- and S-onsets. For onset time estimates a special phase picker algorithm is introduced. Onset detection is accomplished by comparing short-term average with long-term average after multiplication of north, east and vertical components of recording. For epicentral distances up to 100 km, errors seldom exceed 5 km. The slowness vector, essentially the azimuth, is estimated independently by using the Christoffersson et al. (1988) 'polarization' technique, although a priori knowledge of the P-onset time gives the best results. Differences between 'true' and observed azimuths are generally less than 12 deg C. Practical examples are given by demonstrating the viability of the procedures for automated 3c seismogram analysis. The results obtained compare favourably with those achieved by a miniarray of three stations. (orig.)

  20. Facile Route to Transparent, Strong, and Thermally Stable Nanocellulose/Polymer Nanocomposites from an Aqueous Pickering Emulsion.

    Science.gov (United States)

    Fujisawa, Shuji; Togawa, Eiji; Kuroda, Katsushi

    2017-01-09

    Cellulose nanofibril (CNF) is a promising nanofiller for polymer nanocomposite materials, and a critical challenge in designing these materials is organization of the nanostructure using a facile process. Here, we report a facile aqueous preparation process for nanostructured polystyrene (PS)/CNF composites via the formation of a CNF-stabilized Pickering emulsion. PS nanoparticles, with a narrow size distribution, were synthesized by free radical polymerization in water using CNF as a stabilizer. The nanoparticles were easily collected by filtration, and the resulting material had a composite structure of PS nanoparticles embedded in a CNF framework. The PS/CNF nanocomposite showed high optical transparency, strength, and thermal dimensional stability. Thus, this technique provides a simple and environmentally friendly method for the preparation of novel CNF/polymer nanocomposite materials.

  1. Investigations of titamium and zirconium hydrides to determine suitability of recoverable tritium immobilization for the Pickering tritium removal system

    International Nuclear Information System (INIS)

    Noga, J.O.

    1981-11-01

    A tritium removal system will be constructed at Pickering Nuclear Generating station to reduce the adverse effects of this radioactive hydrogen isotope. This report summarizes various properties of titanium and zirconium sponge hydrides which have been selected as suitable candidates for tritium product immobilization. Equilibrium pressure-composition-temperature data indicates that both materials behave suitably to provide a safe, solid form of tritium storage. Titanium tritide is recommended as the best choice due to higher dissociation pressures which can be achieved at equivalent temperatures when compared to zirconium tritide. Higher dissociation pressures would result in faster and more efficient recovery of tritium gas from the immobilized state. It is evident from the stability of these compounds that their utilization as tritides will greatly enhance the integrity of tritium storage

  2. Static yield stress of a magnetorheological fluid containing Pickering emulsion polymerized Fe2O3/polystyrene composite particles.

    Science.gov (United States)

    Seo, Youngwook P; Kwak, Soonjong; Choi, Hyoung Jin; Seo, Yongsok

    2016-02-01

    The flow behaviors of magnetorheological (MR) suspensions containing Pickering emulsion polymerized Fe2O3/polystyrene (PS) composite particles were reanalyzed using the Seo-Seo model. The experimental shear stress data obtained experimentally from the magnetorheological fluid fit well to the Seo-Seo model, indicating that this model can describe the structural reformation process of the aligned fibers at various shear rates. Unlike the dynamic yield stress obtained from the Cho-Choi-Jhon (CCJ) model, the static yield stresses obtained from the Seo-Seo model exhibit the same quadratic dependence on the magnetic field strength for both pure Fe2O3 particle suspension and Fe2O3/PS particle suspensions, which is in agreement with the predictions of the polarization model. The static yield stress plausibly explains the difference in underlying mechanism of MR fluids. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Sir Francis Joseph Campbell and His Family: The First Family in Professional Services for People Who Are Blind or Visually Impaired

    Science.gov (United States)

    Welsh, Richard L.

    2008-01-01

    The author discusses the pivotal roles of Sir Francis Campbell (1832-1914) and members of his family, especially his son Charles Campbell, in the evolution of the blindness field to a professional and reason-based service.

  4. On the physical mechanisms governing self-excited pressure surge in Francis turbines

    International Nuclear Information System (INIS)

    Müller, A; Favrel, A; Landry, C; Yamamoto, K; Avellan, F

    2014-01-01

    The required operating range for hydraulic machines is continually extended in an effort to integrate renewable energy sources with unsteady power outputs into the existing electrical grid. The off-design operation however brings forth unfavorable flow patterns in the machine, causing dynamic problems involving cavitation, which may represent a limiting factor to the energy production. In Francis turbines it is observed that the self-excited oscillation of a vortex rope in the draft tube cone prevents the delivery of maximum power when required. This phenomenon is referred to as full load pressure surge and has been the object of extensive research during the past decades. Several contributions deepened its understanding through measurement and simulation of the local flow properties and the global stability parameters. The draft tube pressure level and the runner outlet swirl are identified as key variables in the modelling of the vortex rope dynamics. Recently, a cyclic appearance of blade cavitation has been observed at overload conditions in a multiphase numerical simulation coupling the runner and the draft tube. From the analysis of the simulation it becomes obvious that the cyclic appearance of blade cavitation has a direct effect on the runner outlet swirl, thus introducing an additional interaction mechanism that is not accounted for in formerly published models. For the presented work, the results of this numerical study are confirmed experimentally on a reduced scale model of a Francis turbine. Several wall pressure measurements in the draft tube cone are performed, together with high speed visualizations of the vortex rope and the blade cavitation. The flow swirl is calculated based on Laser Doppler Velocimetry measurements. A possible mechanism explaining the coupling between the self-excited pressure and vortex rope oscillation and the cyclic appearance of the blade cavitation is proposed. Furthermore, the streamwise propagation speed of the flow

  5. On the sloshing free surface in the draft tube cone of a Francis turbine operating in synchronous condenser mode

    Science.gov (United States)

    Vagnoni, E.; Andolfatto, L.; Avellan, F.

    2017-04-01

    Hydropower plants may be required to operate in synchronous condenser mode in order to supply reactive power to the grid for compensating the fluctuations introduced by the intermittent renewable energies such wind and solar. When operating in this mode, the tail water in the Francis turbine or pump-turbine is depressed below the runner by injecting pressurized air in order to spin in air to reduce the power consumption. Many air-water interaction phenomena occur in the machine causing air losses and a consequent power consumption to recover the air lost. In this paper, the experimental investigation of the sloshing motion in the cone of a dewatered Francis turbine performed by image visualization and pressure measurements is presented. The developed image post processing method for identifying the amplitude and frequency of the oscillation of the free surface is described and the results obtained are illustrated and discussed.

  6. Fukuyama : kõigepealt hea valitsus, siis demokraatia ja ajaloo lõpp / Francis Fukuyama ; interv. Nathan Gardels

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2005-01-01

    Francis Fukuyama sõnul vajab riik oma arenguks esmajoones head valitsemist. Kõige olulisem on, et oleks toimiv riik, mis suudab tagada julgeoleku ja majandusarengu elementaarsed tingimused. Iraagi praeguste probleemide põhjus on selles, et USA ei suutnud ette näha, kuidas riik Saddami kukkudes kokku variseb, kuid tuleb mõista, et aeg-ajalt on USA ja kogu maailma huvides kusagil maailma nurgas riigi ehitamine tõsiselt ette võtta, ütleb autor

  7. Numerical analysis of solid–liquidtwo-phase turbulent flow in Francis turbine runner with splitter bladesin sandy water

    Directory of Open Access Journals (Sweden)

    Hua Hong

    2015-03-01

    Full Text Available As the key component of a hydroelectric power generation system, hydraulic turbine plays a decisive role in the overall performance of the system. There are many sandy rivers in the world, and turbines working in these rivers are seriously damaged. Therefore, the research of flow in sandy water has great theoretical significance and practical value. Based on the specific hydrological conditions of a hydropower station, the solid–liquid two-phase flow in the whole flow passage of a Francis turbine with splitter blades in sandy water was numerically studied. A geometric model of the whole flow passage of the Francis turbine was established on the basis of given design parameters. The solid–liquid two-phase turbulent flows in Francis turbine runner under three different loads were numerically analyzed by using this model. The three different loads are as follows: Condition 1: single unit with 1/4 load, Condition 2: single unit with 1/2 load, and Condition 3: single unit with full load. The distributions of pressure and sand concentration on the leading side and the suction side of the runner blades, as well as the velocity vector distribution of water and sand on the horizontal section of the runner, were obtained under different load conditions. Therefore, the damages to various flow passage components by sand can be qualitatively predicated under various conditions. To guarantee the safety and stability of the unit, the adverse conditions shall be avoided, which can provide certain reference for plant operation.

  8. AMS radiocarbon dating of medieval textile relics: The frocks and the pillow of St. Francis of Assisi

    Energy Technology Data Exchange (ETDEWEB)

    Fedi, M.E. [Dipartimento di Fisica dell' Universita di Firenze and INFN Sezione di Firenze, via Sansone 1, 50019 Sesto Fiorentino (Italy)], E-mail: fedi@fi.infn.it; Cartocci, A.; Taccetti, F.; Mando, P.A. [Dipartimento di Fisica dell' Universita di Firenze and INFN Sezione di Firenze, via Sansone 1, 50019 Sesto Fiorentino (Italy)

    2008-05-15

    Since natural textiles usually originate from short-lived organisms, they can represent a useful material to date samples from historical periods with a good accuracy. In this work, we present a set of radiocarbon measurements on medieval textile relics: two woollen habits and a pillow traditionally associated with St. Francis of Assisi, the saint patron of Italy. The strategy in choosing samples for radiocarbon dating is first discussed and the procedures for measurements - performed at the 3 MV Tandetron accelerator of Laboratorio di Tecniche Nucleari per i Beni Culturali (LABEC), Florence - are described; AMS results for the two frocks showed that only one of them, presently kept in the church of St. Francis in Cortona, is compatible with the Saint's period of life, as is the pillow also kept in Cortona. Another frock attributed to St. Francis appears to date from at least 80 years after his death. However, the goal of these measurements was not a bare authentication/disconfirmation of the relics; they just represent an example of how scientific analysis can integrate with humanistic studies. Indeed, AMS results, combined with a thorough analysis of the textiles typologies, confirmed the historical hypotheses based on documentary studies and on tradition. The overall conclusions contributed to the decisions taken for conservation, and have as a whole enhanced the religious importance of the relics.

  9. AMS radiocarbon dating of medieval textile relics: The frocks and the pillow of St. Francis of Assisi

    International Nuclear Information System (INIS)

    Fedi, M.E.; Cartocci, A.; Taccetti, F.; Mando, P.A.

    2008-01-01

    Since natural textiles usually originate from short-lived organisms, they can represent a useful material to date samples from historical periods with a good accuracy. In this work, we present a set of radiocarbon measurements on medieval textile relics: two woollen habits and a pillow traditionally associated with St. Francis of Assisi, the saint patron of Italy. The strategy in choosing samples for radiocarbon dating is first discussed and the procedures for measurements - performed at the 3 MV Tandetron accelerator of Laboratorio di Tecniche Nucleari per i Beni Culturali (LABEC), Florence - are described; AMS results for the two frocks showed that only one of them, presently kept in the church of St. Francis in Cortona, is compatible with the Saint's period of life, as is the pillow also kept in Cortona. Another frock attributed to St. Francis appears to date from at least 80 years after his death. However, the goal of these measurements was not a bare authentication/disconfirmation of the relics; they just represent an example of how scientific analysis can integrate with humanistic studies. Indeed, AMS results, combined with a thorough analysis of the textiles typologies, confirmed the historical hypotheses based on documentary studies and on tradition. The overall conclusions contributed to the decisions taken for conservation, and have as a whole enhanced the religious importance of the relics

  10. AMS radiocarbon dating of medieval textile relics: The frocks and the pillow of St. Francis of Assisi

    Science.gov (United States)

    Fedi, M. E.; Cartocci, A.; Taccetti, F.; Mandò, P. A.

    2008-05-01

    Since natural textiles usually originate from short-lived organisms, they can represent a useful material to date samples from historical periods with a good accuracy. In this work, we present a set of radiocarbon measurements on medieval textile relics: two woollen habits and a pillow traditionally associated with St. Francis of Assisi, the saint patron of Italy. The strategy in choosing samples for radiocarbon dating is first discussed and the procedures for measurements - performed at the 3 MV Tandetron accelerator of Laboratorio di Tecniche Nucleari per i Beni Culturali (LABEC), Florence - are described; AMS results for the two frocks showed that only one of them, presently kept in the church of St. Francis in Cortona, is compatible with the Saint's period of life, as is the pillow also kept in Cortona. Another frock attributed to St. Francis appears to date from at least 80 years after his death. However, the goal of these measurements was not a bare authentication/disconfirmation of the relics; they just represent an example of how scientific analysis can integrate with humanistic studies. Indeed, AMS results, combined with a thorough analysis of the textiles typologies, confirmed the historical hypotheses based on documentary studies and on tradition. The overall conclusions contributed to the decisions taken for conservation, and have as a whole enhanced the religious importance of the relics.

  11. Expected load spectra of prototype Francis turbines in low-load operation using numerical simulations and site measurements

    Science.gov (United States)

    Eichhorn, M.; Taruffi, A.; Bauer, C.

    2017-04-01

    The operators of hydropower plants are forced to extend the existing operating ranges of their hydraulic machines to remain competitive on the energy market due to the rising amount of wind and solar power. Faster response times and a higher flexibility towards part- and low-load conditions enable a better electric grid control and assure therefore an economic operation of the power plant. The occurring disadvantage is a higher dynamic excitation of affected machine components, especially Francis turbine runners, due to pressure pulsations induced by unsteady flow phenomena (e.g. draft tube vortex ropes). Therefore, fatigue analysis becomes more important even in the design phase of the hydraulic machines to evaluate the static and dynamic load in different operating conditions and to reduce maintenance costs. An approach including a one-way coupled fluid-structure interaction has been already developed using unsteady CFD simulations and transient FEM computations. This is now applied on two Francis turbines with different specific speeds and power ranges, to obtain the load spectra of both machines. The results are compared to strain gauge measurements on the according Francis turbines to validate the overall procedure.

  12. Francis Bacon and the "Interpretation of Nature" in the late Renaissance.

    Science.gov (United States)

    Serjeantson, Richard

    2014-12-01

    The "interpretation of nature" (interpretatio naturae) is the leading idea in Francis Bacon's natural philosophy. But by contrast with his ideas about method, induction, or experiment, the significance of the "interpretation of nature" has received very little scholarly attention. This essay tests the originality of Bacon's idea by means of a focused survey of existing forms of Renaissance natural knowledge-Aristotelian and anti-Aristotelian natural philosophy, Galenic and Paracelsian medicine, natural magic, physiognomy, natural history-before turning to consider the much more prominent place of "interpretation" in the fields of Renaissance logic, revealed and natural theology, and law. It finds that Bacon's application of the idea of "interpretation" to nature was highly original, but also that certain important aspects of his conception have analogies in Renaissance civil law. The essay concludes by exploring the implications of these findings for a recent body of scholarship in the history of the sciences that invokes the notion of the "interpretation of nature" to characterize pre-Baconian natural philosophy more generally.

  13. The “Visual Shock” of Francis Bacon: an essay in neuroesthetics

    Science.gov (United States)

    Zeki, Semir; Ishizu, Tomohiro

    2013-01-01

    In this paper we discuss the work of Francis Bacon in the context of his declared aim of giving a “visual shock.”We explore what this means in terms of brain activity and what insights into the brain's visual perceptive system his work gives. We do so especially with reference to the representation of faces and bodies in the human visual brain. We discuss the evidence that shows that both these categories of stimuli have a very privileged status in visual perception, compared to the perception of other stimuli, including man-made artifacts such as houses, chairs, and cars. We show that viewing stimuli that depart significantly from a normal representation of faces and bodies entails a significant difference in the pattern of brain activation. We argue that Bacon succeeded in delivering his “visual shock” because he subverted the normal neural representation of faces and bodies, without at the same time subverting the representation of man-made artifacts. PMID:24339812

  14. The mine and the furnace: Francis Bacon, Thomas Russell, and early Stuart mining culture.

    Science.gov (United States)

    Pastorino, Cesare

    2009-01-01

    Notwithstanding Francis Bacon's praise for the philosophical role of the mechanical arts, historians have often downplayed Bacon's connections with actual artisans and entrepreneurs. Addressing the specific context of mining culture, this study proposes a rather different picture. The analysis of a famous mining metaphor in The Advancement of Learning shows us how Bacon's project of reform of knowledge could find an apt correspondence in civic and entrepreneurial values of his time. Also, Bacon had interesting and so far unexplored links with the early modern English mining enterprises, like the Company of Mineral and Battery Works, ofwhich he was a shareholder. Moreover, Bacon's notes in a private notebook, Commentarius Solutus, and records of patents of invention, allow us to start grasping Bacon's connections with the metallurgist and entrepreneur Thomas Russell. Lastly, this paper argues that, to fully understand Bacon's links with the world of Stuart technicians and entrepreneurs, it is necessary to consider a different and insufficiently studied aspect of Bacon's interests, namely his work as patents referee while a Commissioner of Suits.

  15. The role of high cycle fatigue (HCF) onset in Francis runner reliability

    International Nuclear Information System (INIS)

    Gagnon, M; Tahan, S A; Bocher, P; Thibault, D

    2012-01-01

    High Cycle Fatigue (HCF) plays an important role in Francis runner reliability. This paper presents a model in which reliability is defined as the probability of not exceeding a threshold above which HCF contributes to crack propagation. In the context of combined Low Cycle Fatigue (LCF) and HCF loading, the Kitagawa diagram is used as the limit state threshold for reliability. The reliability problem is solved using First-Order Reliability Methods (FORM). A study case is proposed using in situ measured strains and operational data. All the parameters of the reliability problem are based either on observed data or on typical design specifications. From the results obtained, we observed that the uncertainty around the defect size and the HCF stress range play an important role in reliability. At the same time, we observed that expected values for the LCF stress range and the number of LCF cycles have a significant influence on life assessment, but the uncertainty around these values could be neglected in the reliability assessment.

  16. When sleep-related hypermotor epilepsy (SHE) met Charles Darwin and Francis Galton.

    Science.gov (United States)

    Parrino, Liborio; Pavesi, Giovanni

    2017-08-01

    Sleep-related hypermotor epilepsy (SHE) is characterized by short-lasting seizures patterned by repetitive and stereotyped motor events in the same person. In autosomal dominant SHE, genetic factors play a well-known key role. In The Expression of Emotions in Man and Animals, Charles Darwin quotes a plausible example of SHE illustrated by his cousin Sir Francis Galton: "the gentleman…lay fast asleep on his back in bed, raising his right arm slowly in front of his face, up to his forehead, and then dropping it with a jerk, so that the wrist fell heavily on the bridge of his nose. The trick did not occur every night, but occasionally, and was independent of any ascertained cause. Sometimes it was repeated incessantly for an hour or more." Similar manifestations during sleep occurred also in the patient's son and granddaughter, suggesting an autosomal inheritance without sex relationship. Differential diagnosis with REM behavior disorder and other parasomnias is discussed. To our knowledge, this could be the first description of a stereotyped SHE pattern with genetic transmission. © 2017 American Academy of Neurology.

  17. The 'root-brain' hypothesis of Charles and Francis Darwin: Revival after more than 125 years.

    Science.gov (United States)

    Baluska, Frantisek; Mancuso, Stefano; Volkmann, Dieter; Barlow, Peter W

    2009-12-01

    This year celebrates the 200(th) aniversary of the birth of Charles Darwin, best known for his theory of evolution summarized in On the Origin of Species. Less well known is that, in the second half of his life, Darwin's major scientific focus turned towards plants. He wrote several books on plants, the next-to-last of which, The Power of Movement of Plants, published together with his son Francis, opened plants to a new view. Here we amplify the final sentence of this book in which the Darwins proposed that: "It is hardly an exaggeration to say that the tip of the radicle thus endowed [with sensitivity] and having the power of directing the movements of the adjoining parts, acts like the brain of one of the lower animals; the brain being seated within the anterior end of the body, receiving impressions from the sense-organs, and directing the several movements." This sentence conveys two important messages: first, that the root apex may be considered to be a 'brain-like' organ endowed with a sensitivity which controls its navigation through soil; second, that the root apex represents the anterior end of the plant body. In this article, we discuss both these statements.

  18. Numerical Simulation and Validation of a High Head Model Francis Turbine at Part Load Operating Condition

    Science.gov (United States)

    Goyal, Rahul; Trivedi, Chirag; Kumar Gandhi, Bhupendra; Cervantes, Michel J.

    2017-07-01

    Hydraulic turbines are operated over an extended operating range to meet the real time electricity demand. Turbines operated at part load have flow parameters not matching the designed ones. This results in unstable flow conditions in the runner and draft tube developing low frequency and high amplitude pressure pulsations. The unsteady pressure pulsations affect the dynamic stability of the turbine and cause additional fatigue. The work presented in this paper discusses the flow field investigation of a high head model Francis turbine at part load: 50% of the rated load. Numerical simulation of the complete turbine has been performed. Unsteady pressure pulsations in the vaneless space, runner, and draft tube are investigated and validated with available experimental data. Detailed analysis of the rotor stator interaction and draft tube flow field are performed and discussed. The analysis shows the presence of a rotating vortex rope in the draft tube at the frequency of 0.3 times of the runner rotational frequency. The frequency of the vortex rope precession, which causes severe fluctuations and vibrations in the draft tube, is predicted within 3.9% of the experimental measured value. The vortex rope results pressure pulsations propagating in the system whose frequency is also perceive in the runner and upstream the runner.

  19. Numerical investigation of the air injection effect on the cavitating flow in Francis hydro turbine

    Science.gov (United States)

    Chirkov, D. V.; Shcherbakov, P. K.; Cherny, S. G.; Skorospelov, V. A.; Turuk, P. A.

    2017-09-01

    At full and over load operating points, some Francis turbines experience strong self-excited pressure and power oscillations. These oscillations are occuring due to the hydrodynamic instability of the cavitating fluid flow. In many cases, the amplitude of such pulsations may be reduced substantially during the turbine operation by the air injection/ admission below the runner. Such an effect is investigated numerically in the present work. To this end, the hybrid one-three-dimensional model of the flow of the mixture "liquid-vapor" in the duct of a hydroelectric power station, which was proposed previously by the present authors, is augmented by the second gaseous component — the noncondensable air. The boundary conditions and the numerical method for solving the equations of the model are described. To check the accuracy of computing the interface "liquid-gas", the numerical method was applied at first for solving the dam break problem. The algorithm was then used for modeling the flow in a hydraulic turbine with air injection below the runner. It is shown that with increasing flow rate of the injected air, the amplitude of pressure pulsations decreases. The mechanism of the flow structure alteration in the draft tube cone has been elucidated, which leads to flow stabilization at air injection.

  20. Experimental Investigation of Inter-Blade Vortices in a Model Francis Turbine

    Science.gov (United States)

    LIU, Demin; LIU, Xiaobing; ZHAO, Yongzhi

    2017-07-01

    The inter-blade vortex in a Francis turbine becomes one of the main hydraulic factors that are likely to cause blade erosion at deep part load operating conditions. However, the causes and the mechanism of inter-blade vortex are still under investigation according to present researches. Thus the causes of inter-blade vortex and the effect of different hydraulic parameters on the inter-blade vortex are investigated experimentally. The whole life cycle of the inter-blade vortex is observed by a high speed camera. The test results illustrate the whole life cycle of the inter-blade vortex from generation to separation and even to fading. It is observed that the inter-blade vortex becomes stronger with the decreasing of flow and head, which leads to pressure fluctuation. Meanwhile, the pressure fluctuations in the vane-less area and the draft tube section become stronger when inter-blade vortices exist in the blade channel. The turbine will be damaged if operating in the inter-blade vortex zone, so its operating range must be far away from that zone. This paper reveals the main cause of the inter-blade vortex which is the larger incidence angle between the inflow angle and the blade angle on the leading edge of the runner at deep part load operating conditions.

  1. Experiences with the hydraulic design of the high specific speed Francis turbine

    International Nuclear Information System (INIS)

    Obrovsky, J; Zouhar, J

    2014-01-01

    The high specific speed Francis turbine is still suitable alternative for refurbishment of older hydro power plants with lower heads and worse cavitation conditions. In the paper the design process of such kind of turbine together with the results comparison of homological model tests performed in hydraulic laboratory of ČKD Blansko Engineering is introduced. The turbine runner was designed using the optimization algorithm and considering the high specific speed hydraulic profile. It means that hydraulic profiles of the spiral case, the distributor and the draft tube were used from a Kaplan turbine. The optimization was done as the automatic cycle and was based on a simplex optimization method as well as on a genetic algorithm. The number of blades is shown as the parameter which changes the resulting specific speed of the turbine between n s =425 to 455 together with the cavitation characteristics. Minimizing of cavitation on the blade surface as well as on the inlet edge of the runner blade was taken into account during the design process. The results of CFD analyses as well as the model tests are mentioned in the paper

  2. Experiences with the hydraulic design of the high specific speed Francis turbine

    Science.gov (United States)

    Obrovsky, J.; Zouhar, J.

    2014-03-01

    The high specific speed Francis turbine is still suitable alternative for refurbishment of older hydro power plants with lower heads and worse cavitation conditions. In the paper the design process of such kind of turbine together with the results comparison of homological model tests performed in hydraulic laboratory of ČKD Blansko Engineering is introduced. The turbine runner was designed using the optimization algorithm and considering the high specific speed hydraulic profile. It means that hydraulic profiles of the spiral case, the distributor and the draft tube were used from a Kaplan turbine. The optimization was done as the automatic cycle and was based on a simplex optimization method as well as on a genetic algorithm. The number of blades is shown as the parameter which changes the resulting specific speed of the turbine between ns=425 to 455 together with the cavitation characteristics. Minimizing of cavitation on the blade surface as well as on the inlet edge of the runner blade was taken into account during the design process. The results of CFD analyses as well as the model tests are mentioned in the paper.

  3. The Catholic Bishops in the U.S. Public Arena: Changing Prospects under Pope Francis

    Directory of Open Access Journals (Sweden)

    Richard L. Wood

    2016-02-01

    Full Text Available The public profile of the Roman Catholic bishops of the United States results not simply from their own interventions in political life, but from the broad array of actions and actors within “public Catholicism” broadly conceived. This article assesses the contemporary profile of the American bishops from this broad angle, particularly in light of new dynamics under the papacy of Francis I. It does so by documenting public Catholicism’s presence in ecclesial institutions, other public institutions, and lay-centered social movements (particularly faith-based community organizing and via a case study of the healthcare reform debate around the State Children’s Health Insurance Program and the Affordable Care Act. Cultural and institutional factors shaping Catholic public presence are analyzed in three dimensions of social life: institutional leadership; authority dynamics within the Church; and the culture of prayer, spirituality, and worship in parishes. Finally, the conclusion discusses the key dynamics likely to shape the future of public Catholicism in America.

  4. Simulation of the Francis-99 Hydro Turbine During Steady and Transient Operation

    Science.gov (United States)

    Dewan, Yuvraj; Custer, Chad; Ivashchenko, Artem

    2017-01-01

    Numerical simulation of the Francis-99 hydroturbine with correlation to experimental measurements are presented. Steady operation of the hydroturbine is analyzed at three operating conditions: the best efficiency point (BEP), high load (HL), and part load (PL). It is shown that global quantities such as net head, discharge and efficiency are well predicted. Additionally, time-averaged velocity predictions compare well with PIV measurements obtained in the draft tube immediately downstream of the runner. Differences in vortex rope structure between operating points are discussed. Unsteady operation of the hydroturbine from BEP to HL and from BEP to PL are modeled. It is shown that simulation methods used to model the steady operation produce predictions that correlate well with experiment for transient operation. Time-domain unsteady simulation is used for both steady and unsteady operation. The full-fidelity geometry including all components is meshed using an unstructured polyhedral mesh with body-fitted prism layers. Guide vane rotation for transient operation is imposed using fully-conservative, computationally efficient mesh morphing. The commercial solver STAR-CCM+ is used for all portions of the analysis including meshing, solving and post-processing.

  5. Applying Turbulence Models to Hydroturbine Flows: A Sensitivity Analysis Using the GAMM Francis Turbine

    Science.gov (United States)

    Lewis, Bryan; Cimbala, John; Wouden, Alex

    2011-11-01

    Turbulence models are generally developed to study common academic geometries, such as flat plates and channels. Creating quality computational grids for such geometries is trivial, and allows stringent requirements to be met for boundary layer grid refinement. However, engineering applications, such as flow through hydroturbines, require the analysis of complex, highly curved geometries. To produce body-fitted grids for such geometries, the mesh quality requirements must be relaxed. Relaxing these requirements, along with the complexity of rotating flows, forces turbulence models to be employed beyond their developed scope. This study explores the solution sensitivity to boundary layer grid quality for various turbulence models and boundary conditions currently implemented in OpenFOAM. The following models are resented: k-omega, k-omega SST, k-epsilon, realizable k-epsilon, and RNG k-epsilon. Standard wall functions, adaptive wall functions, and sub-grid integration are compared using various grid refinements. The chosen geometry is the GAMM Francis Turbine because experimental data and comparison computational results are available for this turbine. This research was supported by a grant from the DoE and a National Defense Science and Engineering Graduate Fellowship.

  6. A Parametric Study of Unsteady Rotor-Stator Interaction in a Simplified Francis Turbine

    Science.gov (United States)

    Wouden, Alex; Cimbala, John; Lewis, Bryan

    2011-11-01

    CFD analysis is becoming a critical stage in the design of hydroturbines. However, its capability to represent unsteady flow interactions between the rotor and stator (which requires a 360-degree, mesh-refined model of the turbine passage) is hindered. For CFD to become a more effective tool in predicting the performance of a hydroturbine, the key interactions between the rotor and stator need to be understood using current numerical methods. As a first step towards evaluating this unsteady behavior without the burden of a computationally expensive domain, the stator and Francis-type rotor blades are reduced to flat plates. Local and global variables are compared using periodic, semi-periodic, and 360-degree geometric models and various turbulence models (k-omega, k-epsilon, and Spalart-Allmaras). The computations take place within the OpenFOAM® environment and utilize a general grid interface (GGI) between the rotor and stator computational domains. The rotor computational domain is capable of dynamic rotation. The results demonstrate some of the strengths and limitations of utilizing CFD for hydroturbine analysis. These case studies will also serve as tutorials to help others learn how to use CFD for turbomachinery. This research is funded by a grant from the DOE.

  7. Experimental Investigation on the Characteristics of Hydrodynamic Stabilities in Francis Hydroturbine Models

    Directory of Open Access Journals (Sweden)

    Wen-Tao Su

    2014-03-01

    Full Text Available This paper presents an experimental investigation of flow phenomena related to the characteristic frequencies of pressure fluctuation in Francis hydroturbine models. The experiments were carried out on two test rigs with two model runners having hydraulic similarities. Flow field around the guide vanes was measured with a particle image velocimetry (PIV on the first PIV test rig. Flow structures at the inlet region of runner and in draft tube at different operating conditions were visualized on another hydrodynamic test rig. Analyses of dominant frequency of unsteady hydraulic behaviors in the tested hydroturbines were performed. It was observed that the main frequency of flow over the guide vanes and the dominant frequency of channel vortex equal the blade passing frequency; the dominant frequency of flow separation at the suction side of blade inlet equals the vane passing frequency; the vortex rope in the draft tube displays a low-frequency nature. The flow instabilities and fluctuations directly influence the running of hydroturbine, thus these experimental results could provide important evidence for the stability study of a real hydroturbine.

  8. Laboratory modeling of flow regimes in a draft tube of Francis hydro-turbine

    Directory of Open Access Journals (Sweden)

    Shtork Sergey

    2017-01-01

    Full Text Available The paper reports on some results of the experimental study of flow and pressure pulsations in a laboratory model of the draft tube (DT of Francis-99 hydro-turbine over a broad range of operating regimes. Velocity distributions at the model inlet varied within 866 modes of the turbine load conditions, including those with maximum coherent pressure pulsations on the model walls. The contact and non-contact methods were used to measure pressure pulsations on the model walls using acoustic sensors and to measure the averaged velocity distribution with a laser Doppler anemometer “LAD-06i”. Analysis of the results have showed that in the model cone there are flow modes with forming of precessing vortex cores, accompanied by a sharp increase in the amplitude of coherent pressure pulsations on the wall and the velocity field rearrangement. It is shown that the vortex core starts forming with an increase in the integral parameter of swirl up to S>0.5. A novelty of the work is the combination of the rapid prototyping (3-d printing of the inflow swirl generators and computerized measurement techniques that makes it possible to acquire rapidly a large amount of experimental data for a variety of designs and operating conditions. The results can provide insight into the effect of various design and operating parameters on the flow physics, as well as serve for verification of the numerical simulations.

  9. Deciphering the language of nature: cryptography, secrecy, and alterity in Francis Bacon.

    Science.gov (United States)

    Clody, Michael C

    2011-01-01

    The essay argues that Francis Bacon's considerations of parables and cryptography reflect larger interpretative concerns of his natural philosophic project. Bacon describes nature as having a language distinct from those of God and man, and, in so doing, establishes a central problem of his natural philosophy—namely, how can the language of nature be accessed through scientific representation? Ultimately, Bacon's solution relies on a theory of differential and duplicitous signs that conceal within them the hidden voice of nature, which is best recognized in the natural forms of efficient causality. The "alphabet of nature"—those tables of natural occurrences—consequently plays a central role in his program, as it renders nature's language susceptible to a process and decryption that mirrors the model of the bilateral cipher. It is argued that while the writing of Bacon's natural philosophy strives for literality, its investigative process preserves a space for alterity within scientific representation, that is made accessible to those with the interpretative key.

  10. From medicine to natural philosophy: Francis Hauksbee's way to the air-pump.

    Science.gov (United States)

    Brundtland, Terje

    2008-06-01

    Francis Hauksbee (1660-1713) is well known for his double-barrelled air-pump. However, the origin of this pump, and Hauksbee's background, are often described as a mystery. This text seeks to dispel the riddle. It is argued that Hauksbee's competence as an exceptional maker of air-pumps was developed between 1699 and 1703 as a result of his experiences with the construction, manufacturing and sale of cupping-glasses. His cupping utensils embodied a new design, where syringes were used to evacuate the glasses, instead of the traditional way by fire or mouth suction. These syringes, which in fact were small air-pumps, were perfected between 1699 and 1701. A larger syringe, introduced in 1701, served as a transition from the cupping-syringe to his first air-pump for use in natural philosophy. This syringe was described as a 'combined engine', which could serve as an air-pump, a condensing engine and a syringe for injecting air, wax or mercury into pathological specimens. Hauksbee's first air-pump was a single-barrelled model introduced in 1702, based on the combined engine. Its various features, such as easy and convenient leak-tightening, exact pressure measurements by an in-built barometer and an air-inlet function for readmission of air into the receiver, are discussed. Finally, it is shown that these activities gave Hauksbee the reputation of being an outstanding instrument-maker, years before the double-barrelled air-pump was in sight.

  11. Experimental Hydro-Mechanical Characterization of Full Load Pressure Surge in Francis Turbines

    Science.gov (United States)

    Müller, A.; Favrel, A.; Landry, C.; Yamamoto, K.; Avellan, F.

    2017-04-01

    Full load pressure surge limits the operating range of hydro-electric generating units by causing significant power output swings and by compromising the safety of the plant. It appears during the off-design operation of hydraulic machines, which is increasingly required to regulate the broad integration of volatile renewable energy sources into the existing power network. The underlying causes and governing physical mechanisms of this instability were investigated in the frame of a large European research project and this paper documents the main findings from two experimental campaigns on a reduced scale model of a Francis turbine. The multi-phase flow in the draft tube is characterized by Particle Image Velocimetry, Laser Doppler Velocimetry and high-speed visualizations, along with synchronized measurements of the relevant hydro-mechanical quantities. The final result is a comprehensive overview of how the unsteady draft tube flow and the mechanical torque on the runner shaft behave during one mean period of the pressure oscillation, thus defining the unstable fluid-structure interaction responsible for the power swings. A discussion of the root cause is initiated, based on the state of the art. Finally, the latest results will enable a validation of recent RANS flow simulations used for determining the key parameters of hydro-acoustic stability models.

  12. Investigation of a High Head Francis Turbine at Runaway Operating Conditions

    Directory of Open Access Journals (Sweden)

    Chirag Trivedi

    2016-03-01

    Full Text Available Hydraulic turbines exhibit total load rejection during operation because of high fluctuations in the grid parameters. The generator reaches no-load instantly. Consequently, the turbine runner accelerates to high speed, runaway speed, in seconds. Under common conditions, stable runaway is only reached if after a load rejection, the control and protection mechanisms both fail and the guide vanes cannot be closed. The runner life is affected by the high amplitude pressure loading at the runaway speed. A model Francis turbine was used to investigate the consequences at the runaway condition. Measurements and simulations were performed at three operating points. The numerical simulations were performed using standard k-ε, k-ω shear stress transport (SST and scale-adaptive simulation (SAS models. A total of 12.8 million hexahedral mesh elements were created in the complete turbine, from the spiral casing inlet to the draft tube outlet. The experimental and numerical analysis showed that the runner was subjected to an unsteady pressure loading up to three-times the pressure loading observed at the best efficiency point. Investigates of unsteady pressure pulsations at the vaneless space, runner and draft tube are discussed in the paper. Further, unsteady swirling flow in the blade passages was observed that was rotating at a frequency of 4.8-times the runaway runner angular speed. Apart from the unsteady pressure loading, the development pattern of the swirling flow in the runner is discussed in the paper.

  13. Water hammer effect in the spiral case and penstock of Francis turbines

    Science.gov (United States)

    Pepa, D.; Ursoniu, C.; Gillich, R. N.; Campian, C. V.

    2017-01-01

    Sudden pressure increases in the penstock or spiral case of a hydraulic turbine are the effect of sudden flow variation that occur during transient processes of type opening / closing or load rejection of the hydro unit. The consequence of the pressure rise in the spiral case and penstock is the water hammer phenomenon, whose effects can be devastating in some cases, up to breaking pipes and calamities produced in the area. This paper aims to analyze the method of calculation of the maximum pressure values that might occur in load rejection situations to a hydraulic turbine, in spiral case and in penstock, conditioned by the limiting of the values of the over speed and measures of limiting the increase in pressure in conjunction with limiting the increase in speed in these specific processes. As an example, we studied and analyzed the situation of a hydroelectric power plant equipped with a 7.8 MW Francis turbine without pressure regulator and the inflow surge. The results of analytical calculation overlaid on the experimental measurements performed during the performance tests of the hydro unit lead to the conclusion that the calculation algorithm proposed has been chosen correctly and the 2-stage closing law of the wicket gate promoted in this case is effective in such situations.

  14. Predicting the performance of a high head Francis turbine using a fully implicit mixing plane

    International Nuclear Information System (INIS)

    Amstutz, O; Aakti, B; Casartelli, E; Mangani, L; Hanimann, L

    2015-01-01

    In the present paper numerical investigations of a complete high head Francis turbine comprehensive of a spiral casing, stay and guide vanes and draft tube have been performed at three operating conditions, namely at part load (PL), best efficiency point (BEP), and high load (HL). The main target of the investigations is to assess the prediction accuracy of a reduced domain of the complete turbine using a novel mixing-plane formulation. The computational domain is simplified simulating one single passage of the runner, thus assuming rotational periodicity and steady state conditions. The results were compared with experimental data published by the workshop organization. All CFD simulations were performed at model scale with an in-house adapted, 3D, unstructured, object-oriented finite volume code based on the OpenFOAM-V2.2 framework and designed to solve steady-state incompressible RANS-Equations. The pressure-based solver uses a SIMPLE-C like algorithm and is capable of handling multiple references of frame (MRF). The influence of the turbulence has been considered applying the shear-stress transport model (SST). Full second order upwind scheme for advection discretization has been used for all computations

  15. Networks of recyclable material waste-picker's cooperatives: an alternative for the solid waste management in the city of Rio de Janeiro.

    Science.gov (United States)

    Tirado-Soto, Magda Martina; Zamberlan, Fabio Luiz

    2013-04-01

    The objective of this study is to discuss the role of networks formed of waste-picker cooperatives in ameliorating problems of final disposal of solid waste in the city of Rio de Janeiro, since the city's main landfill will soon have to close because of exhausted capacity. However, it is estimated that in the city of Rio de Janeiro there are around five thousand waste-pickers working in poor conditions, with lack of physical infrastructure and training, but contributing significantly by diverting solid waste from landfills. According to the Sustainable Development Indicators (IBGE, 2010a,b) in Brazil, recycling rates hover between 45% and 55%. In the municipality of Rio de Janeiro, only 1% of the waste produced is collected selectively by the government (COMLURB, 2010), demonstrating that recycling is mainly performed by waste-pickers. Furthermore, since the recycling market is an oligopsony that requires economies of scale to negotiate directly with industries, the idea of working in networks of cooperatives meets the demands for joint marketing of recyclable materials. Thus, this work presents a method for creating and structuring a network of recycling cooperatives, with prior training for working in networks, so that the expected synergies and joint efforts can lead to concrete results. We intend to demonstrate that it is first essential to strengthen the waste-pickers' cooperatives in terms of infrastructure, governance and training so that solid waste management can be environmentally, socially and economically sustainable in the city of Rio de Janeiro. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Histidine-functionalized carbon-based dot-Zinc(II) nanoparticles as a novel stabilizer for Pickering emulsion synthesis of polystyrene microspheres.

    Science.gov (United States)

    Ruiyi, Li; Zaijun, Li; Junkang, Liu

    2017-05-01

    Carbon-based dots (CDs) are nanoparticles with size-dependent optical and electronic properties that have been widely applied in energy-efficient displays and lighting, photovoltaic devices and biological markers. However, conventional CDs are difficult to be used as ideal stabilizer for Pickering emulsion due to its irrational amphiphilic structure. The study designed and synthesized a new histidine-functionalized carbon dot-Zinc(II) nanoparticles, which is termed as His-CD-Zn. The His-CD was made via one-step hydrothermal treatment of histidine and maleic acid. The His-CD reacted with Zn 2+ to form His-CD-Zn. The as-prepared His-CD-Zn was used as a solid particle surfactant for stabilizing styrene-in-water emulsion. The Pickering emulsion exhibits high stability and sensitive pH-switching behaviour. The introduction of S 2 O 8 2- triggers the emulsion polymerization of styrene. The resulted polystyrene microsphere was well coated with His-CDs on the surface. It was successfully used as an ideal adsorbent for removal of heavy metallic ions from water with high adsorption capacity. The study also provides a prominent approach for fabrication of amphiphilic carbon-based nanoparticles for stabilizing Pickering emulsion. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Fabrication of CMC-g-PAM superporous polymer monoliths via eco-friendly Pickering-MIPEs for superior adsorption of methyl violet and methylene blue

    Science.gov (United States)

    Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

    2017-06-01

    A series of superporous carboxymethylcellulose-graft-poly(acrylamide) (CMC-g-PAM) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14% and 3%, respectively. The porous monolith can rapidly adsorb 1585 mg/g of methyl violet (MV) and 1625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for 5 times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontimination of dye-containing wastewater.

  18. Computation and analysis of cavitating flow in Francis-class hydraulic turbines

    Science.gov (United States)

    Leonard, Daniel J.

    Hydropower is the most proven renewable energy technology, supplying the world with 16% of its electricity. Conventional hydropower generates a vast majority of that percentage. Although a mature technology, hydroelectric generation shows great promise for expansion through new dams and plants in developing hydro countries. Moreover, in developed hydro countries, such as the United States, installing generating units in existing dams and the modern refurbishment of existing plants can greatly expand generating capabilities with little to no further impact on the environment. In addition, modern computational technology and fluid dynamics expertise has led to substantial improvements in modern turbine design and performance. Cavitation has always presented a problem in hydroturbines, causing performance breakdown, erosion, damage, vibration, and noise. While modern turbines are usually designed to be cavitation-free at their best efficiency point, due to the variable demand of the energy market it is fairly common to operate at off-design conditions. Here, cavitation and its deleterious effects are unavoidable, and hence, cavitation is a limiting factor on the design and operation of these turbines. Multiphase Computational Fluid Dynamics (CFD) has been used in recent years to model cavitating flow for a large range of problems, including turbomachinery. However, CFD of cavitating flow in hydroturbines is still in its infancy. This dissertation presents steady-periodic Reynolds-averaged Navier-Stokes simulations of a cavitating Francis-class hydroturbine at model and prototype scales. Computational results of the reduced-scale model and full-scale prototype, undergoing performance breakdown, are compared with empirical model data and prototype performance estimations based on standard industry scalings from the model data. Mesh convergence of the simulations is also displayed. Comparisons are made between the scales to display that cavitation performance breakdown

  19. Numerical Simulation of the Francis Turbine and CAD used to Optimized the Runner Design (2nd).

    Science.gov (United States)

    Sutikno, Priyono

    2010-06-01

    , medium head Francis type, with following value for the most important parameter, the rated specific speed ns.

  20. Sobre as afinidades entre a filosofia de Francis Bacon e o ceticismo

    Directory of Open Access Journals (Sweden)

    Luiz A. A. Eva

    2006-06-01

    Full Text Available Este texto se ocupa de um exame, em caráter introdutório, das relações entre a reflexão de Bacon acerca das limitações de nossas faculdades e o ceticismo filosófico - um tema pouco considerado pela literatura mais recente, a despeito das muitas referências a tal filosofia. Ainda que, à primeira vista, tais referências possam parecer vagas e imprecisas, pensamos que um exame adequado de algumas delas pode revelar, não apenas a importância do tema para a compreensão de aspectos do seu próprio empreendimento, mas o interesse de Bacon pela literatura cética contemporânea. As peculiaridades de sua própria interpretação, por sua vez, parecem antecipar traços do modo como essa filosofia foi compreendida por filósofos posteriores, como Hume.This text focuses, in a preliminary way, on the relations between Francis Bacon's reflections on the limits of our cognitive faculties and philosophical skepticism, a theme not much considered by most of recent commentaries, in spite of Bacon's own explicit and numerous allusions to this philosophy. Even if these allusions seem at first sight somewhat loose and not very sharp, some of them reveal, we think, not only its relevance for understanding of some aspects of his own enterprise, but also Bacon's attention to the skeptical literature produced on the period. Moreover, the particularities of his own interpretation of skepticism seem to anticipate important features of the way this philosophy was understood by later philosophers as Hume.

  1. Two-phase simulations of the full load surge in Francis turbines

    Science.gov (United States)

    Wack, J.; Riedelbauch, S.

    2016-11-01

    At off-design conditions, Francis turbines experience cavitation which may reduce the power output and can cause severe damage in the machine. Certain conditions can cause self-excited oscillations of the vortex rope in the draft tube at full load operating point. For the presented work, two-phase simulations are carried out at model scale on a domain ranging from the inlet of the spiral case to the outlet of the draft tube. At different locations, wall pressure measurements are available and compared to the simulation results. Furthermore, the dynamics of the cavity volume in the draft tube cone and at the trailing edge of the runner blades are investigated by comparing with high speed visualization. To account for the selfexcited behaviour, proper boundary conditions need to be set. In this work, the focus lies on the treatment of the boundary condition at the inlet. In the first step, the dynamic behaviour of the cavity regions is investigated using a constant mass flow. Thereafter, oscillations of the total pressure and mass flow rate are prescribed using various frequencies and amplitudes. This methodology enables to examine the response of the cavity dynamics due to different excitations. It can be observed that setting a constant mass flow boundary condition is not suitable to account for the self-excited behaviour. Prescribing the total pressure has the result that the frequency of the vapour volume oscillation is the same as the frequency of the excitation signal. Contrary to that, for an excitation with a mass flow boundary condition, the response of the system is not equal to the excitation.

  2. Francis Crick, cross-worlds influencer: A narrative model to historicize big bioscience.

    Science.gov (United States)

    Aicardi, Christine

    2016-02-01

    The essay is an empirical case study of famed British scientist Francis Crick. Viewing him as a 'cross-worlds influencer' who was moreover dedicated to a cause, I have tried to understand how these two characteristics influenced the trajectory of his long career and how they shaped his contributions to the diverse research fields in which he was active, and concluded that these characteristics reconfigure Crick's career into a coherent whole. First, I identify a major thread running through Crick's career: helping organise 'un-disciplined' new research fields, and show that his successive choices were not serendipitous but motivated by what he construed as a crusade against 'vitalism': anti-vitalism was a defining driver of his career. I then examine how Crick put his skills as a crossworlds influencer to the service of his cause, by helping organise his chosen fields of intervention. I argue that his activities as a cross-worlds influencer were an integral part of his way of 'doing science' and that his contributions to science, neuroscience in particular, should be re-evaluated in this light. This leads me to advance a possible strategy for historians to investigate big bioscience fields. Following Abir-Am, I propose to trace their genealogies back to the fluctuating semi-institutional gatherings and the institutional structures that sustained them. My research on Crick supports the view that such studies can bring insights into the question of why the contours of contemporary big bioscience endeavours have come to be shaped the way they are. Further, the essay provides a heuristic device for approaching these enquiries: 'follow the cross-worlds influencers' who worked to build and organise these semi-institutional gatherings and institutional structures. Copyright © 2015 The Author. Published by Elsevier Ltd.. All rights reserved.

  3. Francis Crick, cross-worlds influencer: A narrative model to historicize big bioscience

    Science.gov (United States)

    Aicardi, Christine

    2016-01-01

    The essay is an empirical case study of famed British scientist Francis Crick. Viewing him as a ‘cross-worlds influencer’ who was moreover dedicated to a cause, I have tried to understand how these two characteristics influenced the trajectory of his long career and how they shaped his contributions to the diverse research fields in which he was active, and concluded that these characteristics reconfigure Crick's career into a coherent whole. First, I identify a major thread running through Crick's career: helping organise ‘un-disciplined’ new research fields, and show that his successive choices were not serendipitous but motivated by what he construed as a crusade against ‘vitalism’: anti-vitalism was a defining driver of his career. I then examine how Crick put his skills as a crossworlds influencer to the service of his cause, by helping organise his chosen fields of intervention. I argue that his activities as a cross-worlds influencer were an integral part of his way of ‘doing science’ and that his contributions to science, neuroscience in particular, should be re-evaluated in this light. This leads me to advance a possible strategy for historians to investigate big bioscience fields. Following Abir-Am, I propose to trace their genealogies back to the fluctuating semi-institutional gatherings and the institutional structures that sustained them. My research on Crick supports the view that such studies can bring insights into the question of why the contours of contemporary big bioscience endeavours have come to be shaped the way they are. Further, the essay provides a heuristic device for approaching these enquiries: ‘follow the cross-worlds influencers’ who worked to build and organise these semi-institutional gatherings and institutional structures. PMID:26383132

  4. The Origin of DIRT (Detrital Input and Removal Treatments): the Legacy of Dr. Francis D. Hole

    Science.gov (United States)

    Townsend, K. L.; Lajtha, K.; Caldwell, B.; Sollins, P.

    2007-12-01

    Soil organic matter (SOM) plays a key role in the cycling and retention of nitrogen and carbon within soil. Both above and belowground detrital inputs determine the nature and quantity of SOM. Studies on detrital impacts on SOM dynamics are underway at several LTER, ILTER and LTER-affiliated sites using a common experimental design, Detrital Input and Removal Treatments (DIRT). The concept for DIRT was originally based on experimental plots established at the University of Wisconsin Arboretum by Dr. Francis D. Hole in 1956 to study the effects of detrital inputs on pedogenesis. These plots are located on two forested sites and two prairie sites within the arboretum. Manipulations of the forested sites include double litter, no litter and removal of the O and A horizons. Manipulations of the prairie sites include harvest, mulch, bare and burn. These original treatments have largely been maintained since 1956. After 40 years of maintenance, there were significant differences in soil carbon between the double and no litter plots. The double litter plots had increased by nearly 30% while the no litter plots had decreased over 50%. The original DIRT plots are now 50 years old and have been re-sampled, where possible, for total carbon and nitrogen, labile and recalcitrant carbon fractions, net and gross nitrogen mineralization rates, and SOM bioavailability through CO2 respiration. The soils were fractionated by density to examine the role of carbon in each density fraction. The mean age of carbon in each fraction was determined by radiocarbon dating. This sampling and analysis is of special significance because it provides a glimpse into the future SOM trajectories for the new DIRT sites: Harvard Forest (MA), Bousson (PA), Andrews Experimental Forest (OR) and Sikfokut (Hungary).

  5. Os catadores de lixo e o processo de emancipação social Waste material pickers and emancipation process

    Directory of Open Access Journals (Sweden)

    Marta Pimenta Velloso

    2005-12-01

    Full Text Available O artigo tece comentários sobre o processo de organização de duas associações de catadores de materiais recicláveis. Traz à tona a problemática da exclusão, enfatizando a necessidade de inserção dos segmentos sociais marginalizados. Focaliza, como caminho de inserção, a recriação de espaços com ambiente apropriado ao desenvolvimento da criatividade e, conseqüentemente, ao processo de emancipação social. Apresenta o Pequeno Grupo como solo provisório para existência humana, onde o poder decisório se manifesta a partir da interação dinâmica entre o singular e o coletivo.The article describes the organizing process of two associations of waste and recyclings material pickers. The question of social exclusion emerges emphasizing therefore the urgent socially comeback of left out segments of people. It shows that the way to resocializing is the creation of environmentally approprieted spaces to develop creativity leading thus to self emancipation. The small group is seen as a transitory ground of human life, where the power to decide comes out as an interplay of individuals and collectives bodies.

  6. Preparation of Lignin/Sodium Dodecyl Sulfate Composite Nanoparticles and Their Application in Pickering Emulsion Template-Based Microencapsulation.

    Science.gov (United States)

    Pang, Yuxia; Wang, Shengwen; Qiu, Xueqing; Luo, Yanling; Lou, Hongming; Huang, Jinhao

    2017-12-20

    Lignin is a vastly underutilized biomass resource. The preparation of water-dispersed lignin nanoparticles is an effective way to realize the high-value utilization of lignin. However, the currently reported preparation methods of lignin nanoparticles still have some drawbacks, such as the requirement for toxic organic solvent or chemical modification, complicated operation process, and poor dispersibility. Here, lignin/sodium dodecyl sulfate (SDS) composite nanoparticles (LSNPs) with outstanding water dispersibility and a size range of 70-200 nm were facilely prepared via acidifying the mixed basic solution of alkaline lignin and SDS. No harsh chemical was needed. The formation mechanism was systematically studied. Results indicated that the LSNPs were obtained by acid precipitation of the mixed micelles formed by the self-assembly of lignin and SDS. In addition, on the basis of the LSNP-stabilized Pickering emulsions, lignin/polyurea composite microcapsules combining the excellent chemical stability of a synthetic polyurea shell with the fantastic antiphotolysis and antioxidant properties of lignin were successfully prepared.

  7. Joint Effects of Granule Size and Degree of Substitution on Octenylsuccinated Sweet Potato Starch Granules As Pickering Emulsion Stabilizers.

    Science.gov (United States)

    Li, Jinfeng; Ye, Fayin; Lei, Lin; Zhou, Yun; Zhao, Guohua

    2018-05-02

    The granules of sweet potato starch were size fractionated into three portions with significantly different median diameters ( D 50 ) of 6.67 (small-sized), 11.54 (medium-sized), and 16.96 μm (large-sized), respectively. Each portion was hydrophobized at the mass-based degrees of substitution (DS m ) of approximately 0.0095 (low), 0.0160 (medium), and 0.0230 (high). The Pickering emulsion-stabilizing capacities of modified granules were tested, and the resultant emulsions were characterized. The joint effects of granule size and DS m on emulsifying capacity (EC) were investigated by response surface methodology. For small-, medium-, and large-sized fractions, their highest emulsifying capacities are comparable but, respectively, encountered at high (0.0225), medium (0.0158), and low (0.0095) DS m levels. The emulsion droplet size increased with granule size, and the number of freely scattered granules in emulsions decreased with DS m . In addition, the term of surface density of the octenyl succinic group (SD -OSG ) was first proposed for modified starch granules, and it was proved better than DS m in interpreting the emulsifying capacities of starch granules with varying sizes. The present results implied that, as the particulate stabilizers, the optimal DS m of modified starch granules is size specific.

  8. Preparation of cellulose nanocrystals from asparagus (Asparagus officinalis L.) and their applications to palm oil/water Pickering emulsion.

    Science.gov (United States)

    Wang, Wenhang; Du, Guanhua; Li, Cong; Zhang, Hongjie; Long, Yunduo; Ni, Yonghao

    2016-10-20

    Nano cellulosic materials as promising emulsion stabilizers have attracted great interest in food industry. In this paper, five different sized cellulose nanocrystals (CNC) samples were prepared from stem of Asparagus officinalis L. using the same sulfuric acid hydrolysis conditions but different times (1.5, 2, 2.5, 3.0, and 3.5h). The sizes of these CNC ranged from 178.2 to 261.8nm, with their crystallinity of 72.4-77.2%. The CNC aqueous dispersions showed a typical shear thinning behavior. In a palm oil/water (30/70, v/v) model solution, stable Pickering emulsions were formed with the addition of CNC, and their sizes are in the range of 1-10μm based on the optical and confocal laser scanning microscopy (CLSM) observation. The CNC sample prepared at 3h hydrolysis time, showed a relative efficient emulsion capacity for palm oil droplets, among these CNCs. Other parameters including the CNC, salt, and casein concentrations on the emulsion stability were studied. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Combining Pickering Emulsion Polymerization with Molecular Imprinting to Prepare Polymer Microspheres for Selective Solid-Phase Extraction of Malachite Green

    Directory of Open Access Journals (Sweden)

    Weixin Liang

    2017-08-01

    Full Text Available Malachite green (MG is currently posing a carcinogenic threat to the safety of human lives; therefore, it is highly desirable to develop an effective method for fast trace detection of MG. Herein, for the first time, this paper presents a systematic study on polymer microspheres, being prepared by combined Pickering emulsion polymerization and molecular imprinting, to detect and purify MG. The microspheres, molecularly imprinted with MG, show enhanced adsorption selectivity to MG, despite a somewhat lowered adsorption capacity, as compared to the counterpart without molecular imprinting. Structural features and adsorption performance of these microspheres are elucidated by different characterizations and kinetic and thermodynamic analyses. The surface of the molecularly imprinted polymer microspheres (M-PMs exhibits regular pores of uniform pore size distribution, endowing M-PMs with impressive adsorption selectivity to MG. In contrast, the microspheres without molecular imprinting show a larger average particle diameter and an uneven porous surface (with roughness and a large pore size, causing a lower adsorption selectivity to MG despite a higher adsorption capacity. Various adsorption conditions are investigated, such as pH and initial concentration of the solution with MG, for optimizing the adsorption performance of M-PMs in selectively tackling MG. The adsorption kinetics and thermodynamics are deeply discussed and analyzed, so as to provide a full picture of the adsorption behaviors of the polymer microspheres with and without the molecular imprinting. Significantly, M-PMs show promising solid-phase extraction column applications for recovering MG in a continuous extraction manner.

  10. Evaluation of organic coatings to reduce air leakage through cracks in the Pickering NGS 'A' reactor building 1

    International Nuclear Information System (INIS)

    Deans, J.J.; Sato, J.A.; Hampton, J.H.D.; Cullen, R.; Paterson, G.; Chan, P.; Rajagopalan, R.

    1994-01-01

    Pressure tests conducted in 1992 on the Pickering NGS 'A' Reactor Building 1 showed that the containment leakage rate of the building was close to the licensing limit. The leakage was found to be pressure dependent and was attributed to cracks in the concrete dome. A number of solutions were studied by a task group, and the application of an organic coating to the exterior surface of the dome was identified as the most viable solution under the constraints of schedule and cost. In addition to reducing the air leakage rate, the coating material must be flexible to bridge existing moving cracks, it must have excellent adhesion to the concrete substrate to sustain the design pressure of 41.4 kPa(g) during pressure tests, and it must be durable for an exterior application and service conditions. Five candidate organic coating materials were selected for laboratory testing. As a result of the testing, a single-component elastomeric polyurethane coating was selected to be used on the dome. This paper discusses the selection process, laboratory tests and results, and the application of the polyurethane coating system to the exterior concrete dome surface. However, the main emphasis of the paper is on the laboratory evaluation of the five candidate materials. (author). 2 refs., 3 tabs., 1 fig

  11. Self-Assembled Colloidal Particle Clusters from In Situ Pickering-Like Emulsion Polymerization via Single Electron Transfer Mechanism.

    Science.gov (United States)

    Yuan, Jinfeng; Zhao, Weiting; Pan, Mingwang; Zhu, Lei

    2016-08-01

    A simple route is reported to synthesize colloidal particle clusters (CPCs) from self-assembly of in situ poly(vinylidene fluoride)/poly(styrene-co-tert-butyl acrylate) [PVDF/P(St-co-tBA)] Janus particles through one-pot seeded emulsion single electron transfer radical polymerization. In the in situ Pickering-like emulsion polymerization, the tBA/St/PVDF feed ratio and polymerization temperature are important for the formation of well-defined CPCs. When the tBA/St/PVDF feed ratio is 0.75 g/2.5 g/0.5 g and the reaction temperature is 35 °C, relatively uniform raspberry-like CPCs are obtained. The hydrophobicity of the P(St-co-tBA) domains and the affinity of PVDF to the aqueous environment are considered to be the driving force for the self-assembly of the in situ formed PVDF/P(St-co-tBA) Janus particles. The resultant raspberry-like CPCs with PVDF particles protruding outward may be promising for superhydrophobic smart coatings. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Production of starch nanoparticles by dissolution and non-solvent precipitation for use in food-grade Pickering emulsions.

    Science.gov (United States)

    Saari, Hisfazilah; Fuentes, Catalina; Sjöö, Malin; Rayner, Marilyn; Wahlgren, Marie

    2017-02-10

    The aim of this study was to investigate non-solvent precipitation of starch to produce nanoparticles that could be used in Pickering emulsions. The material used was waxy maize, modified with octenyl succinic anhydride. Different methods of non-solvent precipitation were investigated, and a method based on direct mixing of an 8% starch solution and ethanol (ratio 1:1) was found to produce the smallest particles. The particle size was measured using AFM and AF4, and was found to be in the range 100-200nm. However, both larger particles and aggregates of nanoparticles were observed. The emulsion produced using the precipitated starch particles had a droplet size that between 0.5 and 45μm, compared to emulsions produced from waxy maize granules, in which had a size of 10-100μm. The drop in size contributed to increased stability against creaming. The amount of starch used for emulsion stabilization could also be substantially reduced. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  13. Life extension, power upgrade, and return to service work for Pickering NGS and other PWR and CANDU plants

    International Nuclear Information System (INIS)

    Millman, J.; Idvorian, N.; Schneider, W.

    2002-01-01

    Work on life extension, power upgrade and return to service has been performed and is in progress for a number of PWR and CANDU plants. For PWR plants, power upgrade work has been done for the new replacement steam generators in several cases. This work consists of redoing the formal equipment qualification analysis and reports for the uprated operating conditions to support the application for license adjustment. Life extension assessments have been performed for several CANDU plants. These are highly detailed assessments in which the particular steam generator is reassessed part by part as to the ability of each to sustain full life operation and also extended life operation. Return to service work for Pickering NGSA specifically has included this type of assessment and also specific repair, cleaning and retrofit activities including secondary side inspection, waterlancing, divider plate repair, eddy current inspection, etc. Steam generator modifications and retrofit work have been performed in a number of cases. The paper discusses various life extension, power upgrade, equipment modification and return to service activities all of which are part of the renewed drive in the industry to realise the full potential of nuclear plants by getting more and better performance from the extended service of existing plants. (author)

  14. AECB staff annual assessment of the Pickering A and B Nuclear Generating Stations for the year 1996

    International Nuclear Information System (INIS)

    1997-06-01

    The Atomic Energy Control Board is the independent federal agency that controls all nuclear activities in Canada. A major use of nuclear energy in Canada is electricity production. The AECB assesses every station's performance against legal requirements, including the conditions in the operating licence. Each station is inspected and all aspects of the station's operation and management is reviewed. This report is the AECB staff assessment of reactor safety at the Pickering A and B Generating Stations for 1996. PNGS-A and PNGS-B operated safely during 1996. Although the risk to the workers and the public is low, major safety related changes are necessary at the stations and the sustainability of those changes needs to be demonstrated. Improvement is needed by Ontario Hydro in meeting the time limits for reporting reportable events. Ontario Hydro's follow up to events and causal factor analyses continue to need improvements. Improvements are needed to operational safety and reactor maintenance at both A and B. There are signs of improvement through Ontario Hydro's plan for recovery, and in station management changes. There also appears to be commitment to safety expressed at the highest level of the utility

  15. Natural knowledge as a propaedeutic to self-betterment: Francis Bacon and the transformation of natural history.

    Science.gov (United States)

    Lancaster, James A T

    2012-01-01

    This paper establishes the 'emblematic' use of natural history as a propaedeutic to self-betterment in the Renaissance; in particular, in the natural histories of Gessner and Topsell, but also in the works of Erasmus and Rabelais. Subsequently, it investigates how Francis Bacon's conception of natural history is envisaged in relation to them. The paper contends that, where humanist natural historians understood the use of natural knowledge as a preliminary to individual improvement, Bacon conceived self-betterment foremost as a means to Christian charity, or social-betterment. It thus examines the transformation of the moralizing aspect of Renaissance natural history in Bacon's conception of his Great Instauration.

  16. Abortion, metaphysics and morality: a review of Francis Beckwith's defending life: a moral and legal case against abortion choice.

    Science.gov (United States)

    Nobis, Nathan

    2011-06-01

    In Defending Life: A Moral and Legal Case Against Abortion Choice (2007) and an earlier article in this journal, "Defending Abortion Philosophically"(2006), Francis Beckwith argues that fetuses are, from conception, prima facie wrong to kill. His arguments are based on what he calls a "metaphysics of the human person" known as "The Substance View." I argue that Beckwith's metaphysics does not support his abortion ethic: Moral, not metaphysical, claims that are part of this Substance View are the foundation of the argument, and Beckwith inadequately defends these moral claims. Thus, Beckwith's arguments do not provide strong support for what he calls the "pro-life" view of abortion.

  17. Francis Bacon sob o olhar de Gilles Deleuze: a imagem como intensidade

    Directory of Open Access Journals (Sweden)

    Osvaldo Fontes Filho

    2007-12-01

    Full Text Available O ensaio de Gilles Deleuze La logique de la sensation é texto que se detém principalmente na prática e na eficácia da imagem. A pintura de Francis Bacon é ali tomada como paradigma de modernidade ao investir contra os clichês expressivos e ao produzir imagem junto à brutalidade dos fatos, como um contra-efeito do narrativo. Em uma obra que conjura todo modelo a representar, toda história a contar, “alguma coisa se passa”, explica Deleuze, “que define o funcionamento da pintura”. Algo se passa, tem lugar: o acontecimento de uma catástrofe e de uma histeria no ato de pintura que acomete a Figura de modo a transmitir uma potencial violência de reação e de expressão. O “Bacon” de Deleuze apresenta a realidade vivida em uma nova e não-convencional ordem de sensação. Neste artigo, são comentados os modos como o filósofo interpreta os atos físicos da pintura de Bacon — marcas aleatórias, varredura da massa pictural, escansão das superfícies —, procedimentos que introduzem no mundo visual da figuração a variedade caótica dos fatos e sentidos. Mostra-se como as faces e as figuras contorcidas, distorcidas, escorchadas de Bacon recebem uma voz conceitual complementar no texto de Deleuze. Consequentemente, focaliza-se a disposição de alguns conceitos do filósofo: diagrama, Figura, diferença, espaço háptico. Locados no espaço afetivo ou na “lógica da sensação” da pintura baconiana, esses conceitos atribuem legitimidade ao entrelaçamento e à co-implicação entre arte e filosofia. Uma última observação dá conta do fato de a prática da imagem em Bacon, apresentada por Deleuze no palco de uma modernidade particularmente solapada por um “dilúvio anestésico de imagens reprimindo a possibilidade de pensar”, evidenciar para o filósofo os rumos necessariamente sinuosos, “reptilíneos”, do pensamento moderno. Tanto o conceito como a forma criam por catástrofe, por conflagração, por varia

  18. Francis full-load surge mechanism identified by unsteady 2-phase CFD

    Energy Technology Data Exchange (ETDEWEB)

    Doerfler, P K; Keller, M; Braun, O, E-mail: peter.doerfler@andritz.co [R and D Department, Andritz Hydro Ltd., Zurich (Switzerland)

    2010-08-15

    Francis turbines may produce spontaneous pulsations of pressure and output power when operating at very high discharge. In such cases there is a cavitating central vortex in the draft tube with variable cavity volume V{sub c}. Until today, researchers agree that the main destabilizing agent is the so-called mass flow gain factor, defined as the derivative of cavity volume by the local discharge. Recent studies about 1D high-load stability analysis assumed that the mass-flow gain factor obtained from steady-state vortex data acts on the transient discharge downstream of the cavity. There are however good reasons to question this assumption. Most strikingly, the direct cause of the mass flow gain effect is the increase of swirl produced at the runner exit and hence upstream, not downstream of the cavity. To enhance the reliability of full-load stability predictions, the authors directly investigated the vortex dynamics. The development of the transient cavitating flow in the draft tube was simulated by means of unsteady 2-phase CFD. CFD work started with 1-phase calculations as presented by other authors. This was then extended to a more realistic 2-phase calculation. To contain the computing time within acceptable limits, given the very fine mesh and short time step required, the simulation domain was restricted to the draft tube and, at the same time, the problem was reduced to a basically 2-dimensional rotationally symmetric case. The response of the cavitating draft tube flow to a time-dependent inflow and time-dependent pressure at the draft tube exit was simulated. The results were input to a statistical identification procedure to check possible 1D transient models and find representative parameter values in the sense of a best fit between 1D model and CFD result. As we had suspected, the conventional vortex model with mass flow gain controlled by downstream discharge is not compatible with direct simulation and needs to be modified. The CFD results correspond

  19. THE DESIRE FOR RECOGNITION IN THE CONTEXT OF FRANCIS FUKUYAMA’S UNIVERSAL HISTORY

    Directory of Open Access Journals (Sweden)

    T. V. Danylova

    2016-12-01

    Full Text Available Introduction. Francis Fukuyama in his famous book “The End of History and the Last Man” assumes that human history should be considered as the battle of ideologies that reaches its goal in the universalization of Western liberal democracy. Author’s ideas have gained many supporters. At the same time, they were subjected to severe criticism that reflected the important trends of political life and ideological preferences. Leaving aside the criticism based on geopolitical and civilizational confrontation and confusion which confronts Fukuyama’s theory, it should be stated that anthropological aspect of Fukuyama’s theory has vastly evaded philosophical comprehension. Purpose. This article attempts to test Fukuyama’s theory through the lens of philosophical anthropology and analyze human desire for recognition in the context of Fukuyama’s World History. Methodology. The analysis is focused on human desire for recognition as a significant dimension of human nature. The author has used hermeneutical methodology and anthropological integrative approach. Theoretical basis and results. Fukuyama is not satisfied by merely economic interpretation of history emphasizing that human is not simply an economic animal. Economic development fails to explain why people advocate the principles of liberal democracy. The author goes back to Hegel’s non-materialistic view of history based on the struggle for recognition. According to Fukuyama, this deeply rooted human desire for recognition is the great motor of history and cause of tyranny, conflicts, and wars. But at the same time, it also acts as a psychological foundation of many virtues – the spirit of citizenship, courage, and justice. Throughout history, this desire for recognition was not satisfied. Only modern liberal democracy provides universal recognition of all humans ensuring and protecting their rights. Originality. Fukuyama’s concept is important and interesting because it draws

  20. Numerical investigation of a high head Francis turbine under steady operating conditions using foam-extend

    International Nuclear Information System (INIS)

    Lenarcic, M; Eichhorn, M; Schoder, S J; Bauer, Ch

    2015-01-01

    In this work the incompressible turbulent flow in a high head Francis turbine under steady operating conditions is investigated using the open source CFD software package FOAM-extend- 3.1. By varying computational domains (cyclic model, full model), coupling methods between stationary and rotating frames (mixing-plane, frozen-rotor) and turbulence models (kω-SST, κε), numerical flow simulations are performed at the best efficiency point as well as at operating points in part load and high load. The discretization is adjusted according the y + -criterion with y + mean > 30. A grid independence study quantifies the discretization error and the corresponding computational costs for the appropriate simulations, reaching a GCI < 1% for the chosen grid. Specific quantities such as efficiency, head, runner shaft torque as well as static pressure and velocity components are computed and compared with experimental data and commercial code. Focusing on the computed results of integral quantities and static pressures, the highest level of accuracy is obtained using FOAM in combination with the full model discretization, the mixing-plane coupling method and the κω-SST turbulence model. The corresponding relative deviations regarding the efficiency reach values of Δη rel ∼ 7% at part load, Δη rel ∼ 0.5% at best efficiency point and Δη rel ∼ 5.6% at high load. The computed static pressures deviate from the measurements by a maximum of Δp rel = 9.3% at part load, Δp rel = 4.3% at best efficiency point and Δp rel = 6.7% at high load. Commercial code in turn yields slightly better predictions for the velocity components in the draft tube cone, reaching a good accordance with the measurements at part load. Although FOAM also shows an adequate correspondence to the experimental data at part load, local effects near the runner hub are captured less accurate at best efficiency point and high load. Nevertheless, FOAM is a reasonable alternative to commercial code

  1. Eddy current magnetic bias x-probe qualification and inspection of steam generator Monel 400 tubing in Pickering Nuclear Generating Station

    International Nuclear Information System (INIS)

    Lepine, B.A.; Van Langen, J.; Obrutsky, L.

    2006-01-01

    This paper presents an overview of the x-probe MB 350 eddy current inspection array probe, for detection of open OD axial crack-like flaws in Monel 400 tubes at Pickering Nuclear Generating Station. This report contains a selection of inspection results from the field inspections performed with this probe during the 2003 and 2004 period at Pickering Nuclear Generating Station A and B. During the 2003 in-service eddy current inspection results of Pickering Nuclear Generating Station A (PNGS-A) Unit 2, a 13 mm (0.5 inch) long axial indication was detected by the CTR1 bobbin and CTR2-C4 array probes in Tube R25-C52 of Steam Generator (SG) 11 in the hot leg sludge pile region. An experimental magnetic bias X-probe, specially designed by Zetec for inspection of Monel 400 tubing, was deployed and the indication was characterized as a potential out diameter (OD) axially oriented crack. Post-inspection tube pulling and destructive examination confirmed the presence of an Environmentally Assisted Crack (EAC), approximately 80% deep and 13mm long. Due to the significance of this discovery, Ontario Power Generation (OPG) requested AECL to initiate a program for qualification of the X-probe MB 350 for the detection of OD axial cracks in medium to high magnetic permeability μ r Monel 400 PNGS-A and B steam generator tubing at different locations. The X-probe MB 350 subsequently has been deployed as a primary inspection probe for crack detection for PNGS steam generators. (author)

  2. Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue.

    Science.gov (United States)

    Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

    2017-01-01

    A series of superporous carboxymethylcellulose- graft -poly(acrylamide)/palygorskite (CMC- g -PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

  3. Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

    Directory of Open Access Journals (Sweden)

    Feng Wang

    2017-06-01

    Full Text Available A series of superporous carboxymethylcellulose-graft-poly(acrylamide/palygorskite (CMC-g-PAM/Pal polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM in the oil-in-water (O/W Pickering-medium internal phase emulsions (Pickering-MIPEs composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20 on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV and 1,625 mg/g of methylene blue (MB. After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV and 93.5% (for MB of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

  4. Effects of variable-row-spacing harvesting picker platform scraping plates on cotton fiber quality and quantity

    Directory of Open Access Journals (Sweden)

    Cíntia Michele de Campos Baraviera

    2017-06-01

    Full Text Available There have been increasing demands for high-quality cotton fibers that meet the textile industry quality standards. Concurrently, there have been efforts to reduce contaminants during harvesting to reduce harvesting costs. The goal of this research was to evaluate the efficiency of the picker platform with Variable-Row-Spacing (VRS for harvesting cotton in narrow rows, over two harvest seasons in two regions within the state of Mato Grosso, Brazil. In this study, how the presence vs. absence of scraping plates and variations in travel speed was related to quantifiable levels of impurities the harvested fibers was examined. The research was divided into three experiments (Exp. I, II, and III, using cotton varieties FM 975 WS, IMA 5672 B2 RF, and IMA 5675 B2 RF, with row spacing of 0.45 m. The experimental design was randomized blocks, in a 2 ? 3 factorial design, using the presence/absence of the plate and three speeds (0.61, 1.0, and 1.42 m·s-¹, with seven repetitions, totaling 42 experimental plots. The plot size was 108 m² (3.6 ? 30 m. The data were analyzed using the F test in ANOVA and the post-hoc Tukey test (p < 0.05. The results showed that scraping plates increased the number of stems and cones, and reduced the harvest efficiency of cotton planted in narrow rows in the region of Sorriso-MT during the 2013/2014 harvest. For the 2014/2015 harvest, the highest speed and the presence of the scraping plates increased the number of cones in the cotton samples. In the experiment conducted in Serra da Petrovina, the removal of the scraping plates decreased the amount of cones in the harvested cotton.

  5. Processing the papal encyclical through perceptual filters: Pope Francis, identity-protective cognition, and climate change concern.

    Science.gov (United States)

    Landrum, Asheley R; Lull, Robert B; Akin, Heather; Hasell, Ariel; Jamieson, Kathleen Hall

    2017-09-01

    Previous research suggests that when individuals encounter new information, they interpret it through perceptual 'filters' of prior beliefs, relevant social identities, and messenger credibility. In short, evaluations are not based solely on message accuracy, but also on the extent to which the message and messenger are amenable to the values of one's social groups. Here, we use the release of Pope Francis's 2015 encyclical as the context for a natural experiment to examine the role of prior values in climate change cognition. Based on our analysis of panel data collected before and after the encyclical's release, we find that political ideology moderated views of papal credibility on climate change for those participants who were aware of the encyclical. We also find that, in some contexts, non-Catholics who were aware of the encyclical granted Pope Francis additional credibility compared to the non-Catholics who were unaware of it, yet Catholics granted the Pope high credibility regardless of encyclical awareness. Importantly, papal credibility mediated the conditional relationships between encyclical awareness and acceptance of the Pope's messages on climate change. We conclude by discussing how our results provide insight into cognitive processing of new information about controversial issues. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Self-validated calculation of characteristics of a Francis turbine and the mechanism of the S-shape operational instability

    International Nuclear Information System (INIS)

    Zhang, Z; Titzschkau, M

    2012-01-01

    A calculation method has been presented to accurately estimate the characteristics of a Francis turbine. Both the shock loss at the impeller inlet and the swirling flow loss at the Impeller exit have been confirmed to dominantly influence the turbine characteristics and particularly the hydraulic efficiency. Both together totally govern the through flow of water through the impeller being at the rest. Calculations have been performed for the flow rate, the shaft torque and the hydraulic efficiency and compared with the available measurements on a model turbine. Excellent agreements have been achieved. Some other interesting properties of the turbine characteristics could also be derived from the calculations and verified by experiments. For this reason and because of not using any unreliable assumptions the calculation method has been confirmed to be self-validated. The operational instability in the upper range of the rotational speed, known as the S-shape instability, is ascribed to the total flow separation and stagnation at the impeller inlet. In that range of the rotational speed, the operation of the Francis turbine oscillates between pump and turbine mode.

  7. Glacial Lake Pickering: stratigraphy and chronology of a proglacial lake dammed by the North Sea Lobe of the British-Irish Ice Sheet

    OpenAIRE

    Evans, David J.A.; Bateman, Mark D.; Roberts, David H.; Medialdea, Alicia; Hayes, Laura; Duller, Geoff A.T.; Fabel, Derek; Clark, Chris D.

    2016-01-01

    We report the first chronology, using four new optically stimulated luminescence dates, on the sedimentary record of Glacial Lake Pickering, dammed by the North Sea Lobe of the British–Irish Ice Sheet during the Dimlington Stadial (24–11 ka cal BP). Dates range from 17.6 ± 1.0 to 15.8 ± 0.9 ka for the sedimentation of the Sherburn Sands at East Heslerton, which were formed by multiple coalescing alluvial fans prograding into the falling water levels of the lake and fed by progressively larger...

  8. Interconnectivity of macroporous molecularly imprinted polymers fabricated by hydroxyapatite-stabilized Pickering high internal phase emulsions-hydrogels for the selective recognition of protein.

    Science.gov (United States)

    Sun, Yanhua; Li, Yuqing; Xu, Jiangfeng; Huang, Ling; Qiu, Tianyun; Zhong, Shian

    2017-07-01

    Hydroxyapatite hybridized molecularly imprinted polydopamine polymers with selective recognition of bovine hemoglobin (BHb) were successfully prepared via Pickering oil-in-water high internal phase emulsions-hydrogels and molecularly imprinting technique. The emulsions were stabilized by hydroxyapatite of which the wettability was modified by 3-methacryloxypropyltrimethoxysilane. The materials were characterized by SEM, IR and TGA. The results showed that the BHb imprinted polymers based on Pickering hydrogels (Hydro-MIPs) possess macropores ranging from 20μm to 50μm, and their large numbers of amino groups and hydroxyl groups result in a favorable adsorption capacity for BHb. The maximum adsorption capacity of Hydro-MIPs for BHb was 438mg/g, 3.27 times more than that of the non-imprinted polymers (Hydro-NIPs). The results indicated that Hydro-MIPs possessing well-defined hierarchical porous structures exhibited outstanding recognition behavior towards the target protein molecules. This work provided a promising alternative method for the fabrication of polymer materials with tunable and interconnected pores structures for the separation and purification of protein in vitro. Copyright © 2017. Published by Elsevier B.V.

  9. Rotor optimization of a Francis type hydraulic turbine through the computer flow analysis (CFD); Optimizacion del rodete de una turbina hidraulica tipo Francis a traves del analisis computacional del flujo (CFD)

    Energy Technology Data Exchange (ETDEWEB)

    Rosado Tamariz, Erick

    2007-06-15

    In the analysis of fluid behavior through hydraulic turbines, two basic methodologies for flow analysis and optimization processes in turbines are used, which are: a) modeled of flow through the entire turbine (joint), or modeled one of each component separately, obtaining satisfactory results by both methodologies. The analysis of computational fluids dynamics (CFD) to geometries improved by means of finite volume method (FVM) with their corresponding initials and boundary conditions is made, to solve a system differential equations of second order that correspond to the flow around the dominion of runner blades; considering nonviscous flow and the implementation of the two equations models for the solution of the equations that govern the turbulent flow. Also, used parameterization techniques based in a parametric geometry an objective function and the diminution of cavitation. This work presents the optimization of a runner from a Francis hydro turbine for a 75 MW considering three different load conditions (75%, 85% and 100%) through CFD as a part of the hydraulic analysis for modernization of the actual condition of a power generation unit. Francis runner optimization is made, through a previous analysis of CFD by means of the FVM, considering the viscous effects of the fluid and the model of turbulence developed by Sparlart and Allmaras; modeling the wicket and runner separately. Later the generation of a parametric model of the runner is made and the simulation for the generation of data base is formed. Finally an objective function is considered to develop the optimal geometry of the runner blades. The results are presented in a graphic form in such a way, that it shows the distributions of pressure and speed around the blades runner, the geometrical and performance (efficiency and power) comparison between original and optimized model. [Spanish] En el analisis del comportamiento del fluido a traves de turbinas hidraulicas, se emplean dos metodologias

  10. Tod in den Anden. Ein Brief Francis Halls an Humboldt 1831 und seine historischen und politischen Hintergründe

    Directory of Open Access Journals (Sweden)

    Thomas Schmuck

    2013-12-01

    Full Text Available Zusammenfassung Der Forschungsreisende Francis Hall kam als Soldat nach Südamerika und betätigte sich hier auch als Pflanzensammler, Reiseschriftsteller und Bergsteiger. Er war Freund und Briefpartner Jeremy Benthams und versuchte gemeinsam mit Jean-Baptiste Boussingault den Chimborazo zu besteigen. Der liberale Journalist wurde 1833 in bürgerkriegsähnlichen Unruhen in Ecuador ermordet. Der einzige Brief Halls an Humboldt, in dem er diesen für die Naturerschließung des Landes zu gewinnen versucht, eine Sammlung andiner Pflanzen übersendet und seine Einschätzung zur politischen Lage und Zukunft Südamerikas kundtut, wird hier veröffentlicht und kommentiert. Abstract The British explorer Francis Hall was active in South-America as a soldier, a collector of plants, a writer of travelogues and a mountaineer. Together with Jean-Baptiste Boussingault he failed in ascending the Chimborazo. Friend and correspondent of Jeremy Bentham and also liberal journalist, Hall was killed during riots in Ecuador in 1833. In one single letter addressed to Humboldt, which is presented here, Hall tries to awaken interest for Ecuador, develops his views on the political future of South America and sends a collection of plants from the Andes. Resumen El explorador británico Francis Hall llegó a América del Sur como soldado y allí también se dedicó a la colección de plantas, a escribir sobre viajes y a hacer alpinismo. Intentó subir al Chimborazo con Jean-Baptiste Boussingault. El periodista liberal, amigo de Jeremy Bentham con el que también mantenía correspondencia, fue asesinado en los disturbios de 1833 en Ecuador. En la única carta de Hall a Humboldt, que está publicada y comentada aquí, Hall intenta despertar el interés de Humboldt por la naturaleza del país enviando una colección de plantas andinas y dando su opinión sobre la situación política y el futuro de América del Sur. (Traducción: Christine Lebas

  11. Francis Bacon czyli Diego Velázquez na fotelu dentystycznym - malarskie i inne cytaty jako "dodatek" do rozpraszającego się życia

    NARCIS (Netherlands)

    van Nieukerken, A.

    2014-01-01

    "Francis Bacon or Diego Velázquez in a dentist’s chair" - pictorial and other kinds of quotations as an addition to a disintegrating life The mature poetry of Tadeusz Różewicz seems to be at odds with both modernist and postmodern literary tenets. It undeniably makes abundant use of intertextuality

  12. Dialoguing from a Fixed Point: How Aristotle and Pope Francis Illuminate the Promise--and Limits--of Inclusion in Catholic Higher Education

    Science.gov (United States)

    Petrusek, Matthew Richard

    2017-01-01

    This article examines the meaning of the word "inclusion" as it relates to Catholic identity in higher education. Noting the widespread presence of this value in the mission statements of Catholic colleges, the article draws on insights from Aristotelian logic and Pope Francis's theology of encounter to argue that inclusion can only be…

  13. If Auditors Are Like Belgian Beers, Which Style Would You Prefer? : Discussion of “Auditor Style and Financial Statement Comparability” by Francis, Pinnuck, and Watanabe .

    NARCIS (Netherlands)

    Bruynseels, L.M.L.; Brenk, van H.M.

    2016-01-01

    Recent research by Francis, Pinnuck, and Watanabe (2014) has shown that financial reporting outcomes are influenced by the audit firm’s unique audit style. They argue that audit firm styles are driven by their “unique set of internal working rules that guide the auditor’s application of accounting

  14. St. Francis Rain Garden Water Quality Sampling Interim Data Report; Total Nitrogen, Total Phosphorus, Sediments or Solids, and E. Coli for the period April to June, 2014

    Science.gov (United States)

    This interim data reported is being provided per request to the Metropolitan Sewer District (MSD) to provide summary statistics on a limited set of water quality parameters as measured at the St. Francis Rain Garden site in the Lick Run Valley as it pertains to MSD's Project Grou...

  15. The Red-Attractiveness Effect, Applying the Ioannidis and Trikalinos (2007b) Test, and the Broader Scientific Context: A Reply to Francis (2013)

    Science.gov (United States)

    Elliot, Andrew J.; Maier, Markus A.

    2013-01-01

    Francis (2013) tested for and found evidence of publication bias in 1 of the 3 focal relations examined in Elliot et al. (2010), that between red and attractiveness. He then called into question the research as a whole and the field of experimental psychology more generally. Our reply has 3 foci. First, we attend to the bottom line regarding the…

  16. The Battle between the Biometricians and the Mendelians: How Sir Francis Galton's Work Caused His Disciples to Reach Conflicting Conclusions about the Hereditary Mechanism

    Science.gov (United States)

    Gillham, Nicholas W.

    2015-01-01

    Francis Galton, Charles Darwin's cousin, had wide and varied interests. They ranged from exploration and travel writing to fingerprinting and the weather. After reading Darwin's "On the Origin of Species," Galton reached the conclusion that it should be possible to improve the human stock through selective breeding, as was the…

  17. Renaissance Epyllions: A Comparative Reading of Christopher Marlowe's "Hero and Leander," Thomas Lodge's "Scylla's Metamorphosis" and Francis Beaumont's "Salmacis and Hermaphroditus"

    Science.gov (United States)

    Mahmoudi, Yazdan

    2016-01-01

    The present paper is supposed to compare and contrast three of these masterpieces written the Renaissance period. The epyllions under study are Christopher Marlowe's "Hero and Leander," Thomas Lodge's "Scylla's Metamorphosis" and Francis Beaumont's "Salmacis and Hermaphroditus." Bush believes that "the influence…

  18. Il De uno alla luce dell’Exemplum tractatus de iustitia universali, sive de fontibus iuris di Francis Bacon

    Directory of Open Access Journals (Sweden)

    Romana Bassi

    2016-11-01

    Full Text Available [Reading “De uno” in light of Francis Bacon’s “Exemplum tractatus de iustitia universali, sive de fontibus iuris”]. Although Vico was admittedly disappointed by Bacon’s Exemplum tractatus, a parallel reading of this text and De uno can provide insights as to how Vico ended up having to confront a series of issues: how does the universal law project itself into history? Where does the law stem from? Is there a link between law, occasion, and utility? What are the sources and the scope of authority? How does violence affect the law? What role for religion and piety? How to devise a philology for the laws and ancient fables? Bacon’s scattered aphorisms offer glimpses into problems which find a solution in the all-encompassing order of De uno.

  19. Francis-99 turbine numerical flow simulation of steady state operation using RANS and RANS/LES turbulence model

    Science.gov (United States)

    Minakov, A.; Platonov, D.; Sentyabov, A.; Gavrilov, A.

    2017-01-01

    We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at three regimes, using two eddy-viscosity- (EVM) and a Reynolds stress (RSM) RANS models (realizable k-ɛ, k-ω SST, LRR) and detached-eddy-simulations (DES), as well as large-eddy simulations (LES). Comparison of calculation results with the experimental data was carried out. Unlike the linear EVMs, the RSM, DES, and LES reproduced well the mean velocity components, and pressure pulsations in the diffusor draft tube. Despite relatively coarse meshes and insufficient resolution of the near-wall region, LES, DES also reproduced well the intrinsic flow unsteadiness and the dominant flow structures and the associated pressure pulsations in the draft tube.

  20. Francis Pomponi, Vendetta, justice et politique en Corse. « L’affaire Viterbi » (1789-1821

    Directory of Open Access Journals (Sweden)

    Jean-Claude Farcy

    2010-08-01

    Full Text Available Causes célèbres, crimes et criminels sortant de l’ordinaire ont toujours passionné l’opinion et donné naissance à une littérature à succès, revenant périodiquement sur les mêmes affaires judiciaires. Les historiens de la criminalité et de la justice ont, plus récemment, emprunté cette voie et revisité nombre de ces affaires en les replaçant, avec plus ou moins de succès, dans le contexte de leur époque. L’ouvrage de Francis Pomponi s’inscrit dans cette perspective, celle d’une étude de cas, d...

  1. Using clinical supervision to improve the quality and safety of patient care: a response to Berwick and Francis.

    Science.gov (United States)

    Tomlinson, Jonathon

    2015-06-11

    After widely publicised investigations into excess patient deaths at Mid Staffordshire hospital the UK government commissioned reports from Robert Francis QC and Professor Don Berwick. Among their recommendations to improve the quality and safety of patient care were lifelong learning, professional support and 'just culture'. Clinical supervision is in an excellent position to support these activities but opportunities are in danger of being squeezed out by regulatory and managerial demands. Doctors who have completed their training are responsible for complex professional judgements for which narrative supervision is particularly helpful. With reference to the literature and my own practice I propose that all practicing clinicians should have regular clinical supervision. Clinical supervision has patient-safety and the quality of patient care as its primary purposes. After training is completed, doctors may practice for the rest of their career without any clinical supervision, the implication being that the difficulties dealt with in clinical supervision are no longer difficulties, or are better dealt with some other way. Clinical supervision is sufficiently flexible to be adapted to the needs of experienced clinicians as its forms can be varied, though its functions remain focused on patient safety, good quality clinical care and professional wellbeing. The evidence linking clinical supervision to the quality and safety of patient care reveals that supervision is most effective when its educational and supportive functions are separated from its managerial and evaluative functions. Among supervision's different forms, narrative-based-supervision is particularly useful as it has been developed for clinicians who have completed their training. It provides ways to explore the complexity of clinical judgements and encourages doctors to question one another's authority in a supportive culture. To be successful, supervision should also be professionally led and

  2. LDV survey of cavitation and resonance effect on the precessing vortex rope dynamics in the draft tube of Francis turbines

    Science.gov (United States)

    Favrel, A.; Müller, A.; Landry, C.; Yamamoto, K.; Avellan, F.

    2016-11-01

    The large-scale penetration of the electrical grid by intermittent renewable energy sources requires a continuous operating range extension of hydropower plants. This causes the formation of unfavourable flow patterns in the draft tube of turbines and pump-turbines. At partial load operation, a precessing cavitation vortex rope is formed at the Francis turbine runner outlet, acting as an excitation source for the hydraulic system. In case of resonance, the resulting high-amplitude pressure pulsations can put at risk the stability of the machine and of the electrical grid to which it is connected. It is therefore crucial to understand and accurately simulate the underlying physical mechanisms in such conditions. However, the exact impact of cavitation and hydro-acoustic resonance on the flow velocity fluctuations in the draft tube remains to be established. The flow discharge pulsations expected to occur in the draft tube in resonance conditions have for instance never been verified experimentally. In this study, two-component Laser Doppler Velocimetry is used to investigate the axial and tangential velocity fluctuations at the runner outlet of a reduced scale physical model of a Francis turbine. The investigation is performed for a discharge equal to 64 % of the nominal value and three different pressure levels in the draft tube, including resonance and cavitation-free conditions. Based on the convective pressure fluctuations induced by the vortex precession, the periodical velocity fluctuations over one typical precession period are recovered by phase averaging. The impact of cavitation and hydro-acoustic resonance on both axial and tangential velocity fluctuations in terms of amplitude and phase shift is highlighted for the first time. It is shown that the occurrence of resonance does not have significant effects on the draft tube velocity fields, suggesting that the synchronous axial velocity fluctuations are surprisingly negligible compared to the velocity

  3. FRamework Assessing Notorious Contributing Influences for Error (FRANCIE): Perspective on Taxonomy Development to Support Error Reporting and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lon N. Haney; David I. Gertman

    2003-04-01

    Beginning in the 1980s a primary focus of human reliability analysis was estimation of human error probabilities. However, detailed qualitative modeling with comprehensive representation of contextual variables often was lacking. This was likely due to the lack of comprehensive error and performance shaping factor taxonomies, and the limited data available on observed error rates and their relationship to specific contextual variables. In the mid 90s Boeing, America West Airlines, NASA Ames Research Center and INEEL partnered in a NASA sponsored Advanced Concepts grant to: assess the state of the art in human error analysis, identify future needs for human error analysis, and develop an approach addressing these needs. Identified needs included the need for a method to identify and prioritize task and contextual characteristics affecting human reliability. Other needs identified included developing comprehensive taxonomies to support detailed qualitative modeling and to structure meaningful data collection efforts across domains. A result was the development of the FRamework Assessing Notorious Contributing Influences for Error (FRANCIE) with a taxonomy for airline maintenance tasks. The assignment of performance shaping factors to generic errors by experts proved to be valuable to qualitative modeling. Performance shaping factors and error types from such detailed approaches can be used to structure error reporting schemes. In a recent NASA Advanced Human Support Technology grant FRANCIE was refined, and two new taxonomies for use on space missions were developed. The development, sharing, and use of error taxonomies, and the refinement of approaches for increased fidelity of qualitative modeling is offered as a means to help direct useful data collection strategies.

  4. Space and time reconstruction of the precessing vortex core in Francis turbine draft tube by 2D-PIV

    Science.gov (United States)

    Favrel, A.; Müller, A.; Landry, C.; Yamamoto, K.; Avellan, F.

    2016-11-01

    Francis turbines operating at part load conditions experience the development of a high swirling flow at the runner outlet, giving rise to the development of a cavitation precessing vortex rope in the draft tube. The latter acts as an excitation source for the hydro-mechanical system and may jeopardize the system stability if resonance conditions are met. Although many aspects of the part load issue have been widely studied in the past, the accurate stability analysis of hydro-power plants remains challenging. A better understanding of the vortex rope dynamics in a wide range of operating conditions is an important step towards the prediction and the transposition of the pressure fluctuations from reduced to prototype scale. For this purpose, an investigation of the flow velocity fields at the outlet of a Francis turbine reduced scale physical model operating at part load conditions is performed by means of 2D-PIV in three different horizontal cross-sections of the draft tube cone. The measurements are performed in cavitation-free conditions for three values of discharge factor, comprised between 60% and 81% of the value at the Best Efficiency Point. The present article describes a detailed methodology to properly recover the evolution of the velocity fields during one precession cycle by means of phase averaging. The vortex circulation is computed and the vortex trajectory over one typical precession period is finally recovered for each operating point. It is notably shown that below a given value of the discharge factor, the vortex dynamics abruptly change and loose its periodicity and coherence.

  5. Preference of multi-walled carbon nanotube (MWCNT) to single-walled carbon nanotube (SWCNT) and activated carbon for preparing silica nanohybrid pickering emulsion for chemical enhanced oil recovery (C-EOR)

    Energy Technology Data Exchange (ETDEWEB)

    AfzaliTabar, M. [Department of Chemistry, Islamic Azad University Branch of Tehran North, Tehran (Iran, Islamic Republic of); Alaei, M., E-mail: alaiem@ripi.ir [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), Tehran (Iran, Islamic Republic of); Ranjineh Khojasteh, R.; Motiee, F. [Department of Chemistry, Islamic Azad University Branch of Tehran North, Tehran (Iran, Islamic Republic of); Rashidi, A.M. [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), Tehran (Iran, Islamic Republic of)

    2017-01-15

    The aim of this research was to determine the best nano hybrid that can be used as a Pickering emulsion Chemical Enhanced Oil Recovery (C-EOR). Therefore, we have prepared different carbon structures nano hybrids with SiO{sub 2} nano particles with different weight percent using sol-gel method. The as-prepared nano materials were characterized with X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Thermal Gravimetric Analysis (TGA). Pickering emulsions of these nanohybrids were prepared at pH=7 in ambient temperature and with distilled water. Stability of the mentioned Pickering emulsions was controlled for one month. Emulsion phase morphology was investigated using optical microscopic imaging. Evaluation results demonstrated that the best sample is the 70% MWCNT/SiO{sub 2} nanohybrid. Stability of the selected nanohybrid (70% MWCNT/SiO{sub 2} nanohybrid) was investigated by alteration of salinity, pH and temperature. Results showed that the mentioned Pickering emulsion has very good stability at 0.1%, 1% salinity, moderate and high temperature (25 °C and 90 °C) and neutral and alkaline pH (7, 10) that is suitable for the oil reservoirs conditions. The effect of the related nano fluid on the wettability of carbonate rock was investigated by measuring the contact angle and interfacial tension. Results show that the nanofluid could significantly change the wettability of the carbonate rock from oil wet to water wet and can decrease the interfacial tension. Therefore, the 70% MWCNT/SiO{sub 2} nanohybrid Pickering emulsion can be used for Chemical Enhanced Oil Recovery (C-EOR).

  6. Preference of multi-walled carbon nanotube (MWCNT) to single-walled carbon nanotube (SWCNT) and activated carbon for preparing silica nanohybrid pickering emulsion for chemical enhanced oil recovery (C-EOR)

    International Nuclear Information System (INIS)

    AfzaliTabar, M.; Alaei, M.; Ranjineh Khojasteh, R.; Motiee, F.; Rashidi, A.M.

    2017-01-01

    The aim of this research was to determine the best nano hybrid that can be used as a Pickering emulsion Chemical Enhanced Oil Recovery (C-EOR). Therefore, we have prepared different carbon structures nano hybrids with SiO 2 nano particles with different weight percent using sol-gel method. The as-prepared nano materials were characterized with X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Thermal Gravimetric Analysis (TGA). Pickering emulsions of these nanohybrids were prepared at pH=7 in ambient temperature and with distilled water. Stability of the mentioned Pickering emulsions was controlled for one month. Emulsion phase morphology was investigated using optical microscopic imaging. Evaluation results demonstrated that the best sample is the 70% MWCNT/SiO 2 nanohybrid. Stability of the selected nanohybrid (70% MWCNT/SiO 2 nanohybrid) was investigated by alteration of salinity, pH and temperature. Results showed that the mentioned Pickering emulsion has very good stability at 0.1%, 1% salinity, moderate and high temperature (25 °C and 90 °C) and neutral and alkaline pH (7, 10) that is suitable for the oil reservoirs conditions. The effect of the related nano fluid on the wettability of carbonate rock was investigated by measuring the contact angle and interfacial tension. Results show that the nanofluid could significantly change the wettability of the carbonate rock from oil wet to water wet and can decrease the interfacial tension. Therefore, the 70% MWCNT/SiO 2 nanohybrid Pickering emulsion can be used for Chemical Enhanced Oil Recovery (C-EOR).

  7. Phytotoxicology section investigation in the vicinity of the Bruce Nuclear Power Development, the Pickering Nuclear Generating Station and the Darlington Nuclear Generating Station, in October, 1989

    International Nuclear Information System (INIS)

    1991-02-01

    The Phytotoxicology Section, Air Resources Branch is a participant in the Pickering and Bruce Nuclear Contingency Plans. The Phytotoxicology Emergency Response Team is responsible for collecting vegetation samples in the event of a nuclear emergency at any of the nuclear generating stations in the province. As part of its responsibility the Phytotoxicology Section collects samples around the nuclear generating stations for comparison purposes in the event of an emergency. Because of the limited frequency of sampling, the data from the surveys are not intended to be used as part of a regulatory monitoring program. These data represent an effort by the MOE to begin to establish a data base of tritium concentrations in vegetation. The Phytotoxicology Section has carried out seven surveys in the vicinity of Ontario Hydro nuclear generating stations since 1981. Surveys were conducted for tritium in snow in the vicinity of Bruce Nuclear Power Development (BNPD), February, 1981; tritium in cell-free water of white ash in the vicinity of BNPD, September, 1981; tritium in snow in the vicinity of BNPD, March, 1982; tritium in tree sap in the vicinity of BNPD, April, 1982; tritium in tree sap in the vicinity of BNPD, April, 1984, tritium in the cell-free water of white ash in the vicinity of BNPD, September, 1985; and, tritium in cell-free water of grass in the vicinity of Pickering Nuclear Generation Station (PNGS), October 1986. In all cases a pattern of decreasing tritium levels with increasing distance from the stations was observed. In October, 1989, assessment surveys were conducted around Bruce Nuclear Power Development, the Pickering Nuclear Generating Station and the new Darlington Nuclear Generating Station (DNGS). The purpose of these surveys was to provide baseline data for tritium in cell-free water of grass at all three locations at the same time of year. As none of the reactor units at DNGS had been brought on line at the time of the survey, this data was to be

  8. Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples

    International Nuclear Information System (INIS)

    Yang, Jiajia; Li, Yun; Wang, Jincheng; Sun, Xiaoli; Cao, Rong; Sun, Hao; Huang, Chaonan; Chen, Jiping

    2015-01-01

    Highlights: • BPA imprinted polymer microspheres were prepared by Pickering emulsion polymerization. • Regular spherical shape and narrow diameter distribution. • Good specific adsorption capacity for BPA. • Good class-selectivity and clean-up efficiency for bisphenols in human urine under SPE mode. • Good recoveries and sensitivity for bisphenols using the MIPMS-SPE coupled with HPLC-DAD method. - Abstract: The bisphenol A (BPA) imprinted polymer microspheres were prepared by simple Pickering emulsion polymerization. Compared to traditional bulk polymerization, both high yields of polymer and good control of particle sizes were achieved. The characterization results of scanning electron microscopy and nitrogen adsorption–desorption measurements showed that the obtained molecularly imprinted polymer microsphere (MIPMS) particles possessed regular spherical shape, narrow diameter distribution (30–60 μm), a specific surface area (S BET ) of 281.26 m 2 g −1 and a total pore volume (V t ) of 0.459 cm 3 g −1 . Good specific adsorption capacity for BPA was obtained in the sorption experiment and good class selectivity for BPA and its seven structural analogs (bisphenol F, bisphenol B, bisphenol E, bisphenol AF, bisphenol S, bisphenol AP and bisphenol Z) was demonstrated by the chromatographic evaluation experiment. The MIPMS as solid-phase extraction (SPE) packing material was then evaluated for extraction and clean-up of these bisphenols (BPs) from human urine samples. An accurate and sensitive analytical method based on the MIPMS-SPE coupled with HPLC-DAD has been successfully established for simultaneous determination of eight BPs from human urine samples with detection limits of 1.2–2.2 ng mL −1 . The recoveries of BPs for urine samples at two spiking levels (100 and 500 ng mL −1 for each BP) were in the range of 81.3–106.7% with RSD values below 8.3%

  9. Fabrication and evaluation of chitosan/NaYF4:Yb3+/Tm3+ upconversion nanoparticles composite beads based on the gelling of Pickering emulsion droplets

    International Nuclear Information System (INIS)

    Yan, Huiqiong; Chen, Xiuqiong; Shi, Jia; Shi, Zaifeng; Sun, Wei; Lin, Qiang; Wang, Xianghui; Dai, Zihao

    2017-01-01

    The rare earth ion doped upconversion nanoparticles (UCNPs) synthesized by hydrophobic organic ligands possess poor solubility and low fluorescence quantum yield in aqueous media. To conquer this issue, NaYF 4 :Yb 3+ /Tm 3+ UCNPs, synthesized by a hydrothermal method, were coated with F127 and then assembled with chitosan to fabricate the chitosan/NaYF 4 :Yb 3+ /Tm 3+ composite beads (CS/NaYF 4 :Yb 3+ /Tm 3+ CBs) by Pickering emulsion system. The characterization results revealed that the as-synthesized NaYF 4 :Yb 3+ /Tm 3+ UCNPs with an average size of 20 nm exhibited spherical morphology, high crystallinity and characteristic emission upconversion fluorescence with an overall blue color output. The NaYF 4 :Yb 3+ /Tm 3+ UCNPs were successfully conjugated on the surface of chitosan beads by the gelling of emulsion droplets. The resultant CS/NaYF 4 :Yb 3+ /Tm 3+ CBs showed good upconversion luminescent property, drug-loading capacity, release performance and excellent biocompatibility, exhibiting great potentials in targeted drug delivery and tissue engineering with potential tracking capability and lasting release performance. - Highlights: • NaYF 4 :Yb 3+ /Tm 3+ UCNPs were coated by F127 to improve aqueous dispersibility. • NaYF 4 :Yb 3+ /Tm 3+ UCNPs were assembled with chitosan to fabricate the composite beads (CMs). • Pickering emulsions stabilized by UCNPs exhibited uniform and satisfactory emulsion droplets. • The CMs prepared by the gelling of emulsion droplet preserved upconversion luminescent property. • The resultant CMs showed good drug-loading capacity, release performance and biocompatibility.

  10. Road Bridges and Culverts, MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key Bridge, Bay bridge, Nice Bridge, Published in 2010, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

    Data.gov (United States)

    NSGIC State | GIS Inventory — Road Bridges and Culverts dataset current as of 2010. MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key...

  11. THE SONATA FOR CLARINET AND PIANO BY FRANCIS POULENC FROM THE POINT OF VIEW OF THE GENRE EVOLUTION OF THE 20th CENTURY SONATA

    Directory of Open Access Journals (Sweden)

    ROJNOVEANU ANGELA

    2015-09-01

    Full Text Available The article focuses on the analysis of the Sonata for clarinet and piano by Francis Poulenc that still presents great interest nowadays. This is a masterpiece of twenty century music – an original composition considered from the point of view of its stylistic structure in the context of the experiments carried out in the composition techniques of last century. The author ap­proaches problems of opus themes and architectonics as well as some aspects of musical language.

  12. OBITUARY: Leslie E Howlett, 1904 1992

    Science.gov (United States)

    Preston-Thomas, H.

    1992-01-01

    Dr L E Howlett of Ottawa (Canada), who died in his 88th year on 21 January 1992, was a member of the Comité International des Poids et Mesures (CIPM) from 1955 to 1968 and was President of the Comité Consultatif pour la Définition du Mètre (CCDM) from 1956. He was elected Vice-President of the CIPM in 1960 and President in 1964, and was made an honorary member following his retirement in 1968. After taking degrees from the universities of British Colombia, Toronto and McGill, Howlett joined Canada's National Research Council in 1931, remaining with that institution for virtually all of his working life. He initially set up, singlehandedly, an optics laboratory at the NRC, being joined by a technician in 1932. By the beginning of the war in September 1939 the laboratory had a staff of four, and this was the basis from which, under Howlett's direction, and with no prior optical production in the country, a Canadian optical industry was generated, with samples of a variety of optical instruments being completed by the end of April 1940, and many thousands of precision optical components being manufactured during the course of the war. Much of this precision optical work involved testing, measurement and calibration. Howlett's interests in such work were substantially enlarged when in 1948 he was put in charge, as Assistant Director, of applied research in the Division of Physics. This was, in effect, to be in charge of Canada's standards laboratory, and he then was naturally a candidate for membership of the CIPM. On the subsequent establishment of the Division of Applied Physics Howlett became its Director, a position he retained until his retirement. It was under Howlett's direction that Canada progressed from a state of having only commercial and surveying standards of very moderate precision to that of possessing a world-class standards laboratory. During the period of his membership of the CIPM, he was an enthusiastic proponent of the establishment of the ionizing radiation laboratory at the BIPM, and of the introduction of quantum metrology to the SI in the form of the krypton-86 definition of the metre, adopted in 1960 during his presidency of the CCDM, and the caesium-133 definition of the second in 1967. He was responsible for establishing Metrologia, under the auspices of the CIPM, being editor from its inception in 1965 until his retirement. For these, and for many other related services, Canada and the world measurement community will remember him and his work with gratitude.

  13. Leslie ja Naomi juhtum / Mari Sobolev

    Index Scriptorium Estoniae

    Sobolev, Mari, 1968-

    2004-01-01

    Readingi Ülikoolis (Inglismaa) toimunud feminismikonverentsiga kaasnenud näitusest "Virtue and Vulgarity" ja selle silmapaistvamatest töödest. Analüüsitakse naiste ja meeste kunstile omaseid erinevusi ning võimalust aktsepteerida feminiinsusena ka malbust, alalhoidlikkust. Esitati Mare Tralla CD-ROM "her.space"

  14. Compassionate care in radiography recruitment, education and training: A post-Francis Report review of the current literature and patient perspectives

    International Nuclear Information System (INIS)

    Bleiker, J.; Knapp, K.M.; Hopkins, S.; Johnston, G.

    2016-01-01

    Compassion is elemental in the care of a patient during their medical imaging (MI) procedure and is highly topical in the light of the Francis Report. The patient–practitioner interaction is an amalgam of context, communication and individual differences, and whilst compassion is a term in common parlance in the media, policy and radiographers' professional documents, its meaning and manifestation in radiography recruitment, education and practice are less clearly articulated. A review of the existing literature was undertaken, including a small scale study exploring patients' experiences in diagnostic medical imaging. Themes from the study included communication; competence; emotions; attitudes and relationships, but notably absent was any mention of compassion per se. Radiography research would benefit from further exploratory work into the nature of compassionate patient care in the unique context of the medical imaging encounter; offering an evidence-based contribution to radiography in the light of the Francis Report. - Highlights: • An increased focus on compassion was recommended in the Francis Report. • Best compassionate care is a requirement in radiographers' Code of Professional Conduct. • The meaning of compassionate patient care in radiography is not well understood. • Equally neither is the expression of compassion in radiography. • Research into compassion will contribute to evidence-based practice in radiography.

  15. La prolongation de la vie humaine selon Francis Bacon. Ou : quel Tithon voulons-nous être ?

    Directory of Open Access Journals (Sweden)

    Dominique Weber

    2011-07-01

    Full Text Available Afin de comprendre avec exactitude la manière dont Francis Bacon envisage la question de la prolongation de la vie humaine, il faut impérativement examiner l’assise théologique de la réflexion du philosophe à ce sujet. Il convient aussi de restituer l’intégration de cette réflexion dans les objectifs plus amples de la philosophie naturelle nouvelle. Enfin, il est nécessaire de comprendre les dimensions proprement morales de la question. Car la prolongation de la vie humaine n’est pas seulement, au sein de la philosophie naturelle nouvelle, un cas parmi d’autres des recherches qu’il faut désormais effectuer : en réalité, c’est elle qui lui donne et qui lui fixe son sens ; avec elle se joue l’effectivité de l’identité espérée entre science et puissance. Mais il faut encore préciser qu’il ne s’agit aucunement pour l’homme de vieillir pour vieillir : il s’agit pour lui de pouvoir vieillir bien. Les leçons que Bacon tire de la fable de Tithon sont ici véritablement décisives.

  16. An Intelligent Optimization Method for Vortex-Induced Vibration Reducing and Performance Improving in a Large Francis Turbine

    Directory of Open Access Journals (Sweden)

    Xuanlin Peng

    2017-11-01

    Full Text Available In this paper, a new methodology is proposed to reduce the vortex-induced vibration (VIV and improve the performance of the stay vane in a 200-MW Francis turbine. The process can be divided into two parts. Firstly, a diagnosis method for stay vane vibration based on field experiments and a finite element method (FEM is presented. It is found that the resonance between the Kármán vortex and the stay vane is the main cause for the undesired vibration. Then, we focus on establishing an intelligent optimization model of the stay vane’s trailing edge profile. To this end, an approach combining factorial experiments, extreme learning machine (ELM and particle swarm optimization (PSO is implemented. Three kinds of improved profiles of the stay vane are proposed and compared. Finally, the profile with a Donaldson trailing edge is adopted as the best solution for the stay vane, and verifications such as computational fluid dynamics (CFD simulations, structural analysis and fatigue analysis are performed to validate the optimized geometry.

  17. Nonlinear dynamic analysis and robust controller design for Francis hydraulic turbine regulating system with a straight-tube surge tank

    Science.gov (United States)

    Liang, Ji; Yuan, Xiaohui; Yuan, Yanbin; Chen, Zhihuan; Li, Yuanzheng

    2017-02-01

    The safety and stability of hydraulic turbine regulating system (HTRS) in hydropower plants become increasingly important since the rapid development and the broad application of hydro energy technology. In this paper, a novel mathematical model of Francis hydraulic turbine regulating system with a straight-tube surge tank based on a few state-space equations is introduced to study the dynamic behaviors of the HTRS system, where the existence of possible unstable oscillations of this model is studied extensively and presented in the forms of the bifurcation diagram, time waveform plot, phase trajectories, and power spectrum. To eliminate these undesirable behaviors, a specified fuzzy sliding mode controller is designed. In this hybrid controller, the sliding mode control law makes full use of the proposed model to guarantee the robust control in the presence of system uncertainties, while the fuzzy system is applied to approximate the proper gains of the switching control in sliding mode technique to reduce the chattering effect, and particle swarm optimization is developed to search the optimal gains of the controller. Numerical simulations are presented to verify the effectiveness of the designed controller, and the results show that the performances of the nonlinear HTRS system assisted with the proposed controller is much better than that with the commonly used optimal PID controller.

  18. Influence of upstream disturbance on the draft-tube flow of Francis turbine under part-load conditions

    Science.gov (United States)

    Chen, Ting; Zheng, Xianghao; Zhang, Yu-ning; Li, Shengcai

    2018-02-01

    Owing to the part-load operations for the enhancement of grid flexibility, the Francis turbine often suffers from severe low-frequency and large-amplitude hydraulic instability, which is mostly pertinent to the highly unsteady swirling vortex rope in the draft tube. The influence of disturbances in the upstream (e.g., large-scale vortex structures in the spiral casing) on the draft-tube vortex flow is not well understood yet. In the present paper, the influence of the upstream disturbances on the vortical flow in the draft tube is studied based on the vortex identification method and the analysis of several important parameters (e.g., the swirl number and the velocity profile). For a small guide vane opening (representing the part-load condition), the vortices triggered in the spiral casing propagate downstream and significantly affect the swirling vortex-rope precession in the draft tube, leading to the changes of the intensity and the processional frequency of the swirling vortex rope. When the guide vane opening approaches the optimum one (representing the full-load condition), the upstream disturbance becomes weaker and thus its influences on the downstream flow are very limited.

  19. Proper Orthogonal Decomposition of Pressure Fields in a Draft Tube Cone of the Francis (Tokke) Turbine Model

    International Nuclear Information System (INIS)

    Stefan, D; Rudolf, P

    2015-01-01

    The simulations of high head Francis turbine model (Tokke) are performed for three operating conditions - Part Load, Best Efficiency Point (BEP) and Full Load using software Ansys Fluent R15 and alternatively OpenFOAM 2.2.2. For both solvers the simulations employ Realizable k-e turbulence model. The unsteady pressure pulsations of pressure signal from two monitoring points situated in the draft tube cone and one behind the guide vanes are evaluated for all three operating conditions in order to compare frequencies and amplitudes with the experimental results. The computed velocity fields are compared with the experimental ones using LDA measurements in two locations situated in the draft tube cone. The proper orthogonal decomposition (POD) is applied on a longitudinal slice through the draft tube cone. The unsteady static pressure fields are decomposed and a spatio-temporal behavior of modes is correlated with amplitude-frequency results obtained from the pressure signal in monitoring points. The main application of POD is to describe which modes are related to an interaction between rotor (turbine runner) and stator (spiral casing and guide vanes) and cause dynamic flow behavior in the draft tube. The numerically computed efficiency is correlated with the experimental one in order to verify the simulation accuracy

  20. An Evaluation of a Phase-Lag Boundary Condition for Francis Hydroturbine Simulations Using a Pressure-Based Solver

    Science.gov (United States)

    Wouden, Alex; Cimbala, John; Lewis, Bryan

    2014-11-01

    While the periodic boundary condition is useful for handling rotational symmetry in many axisymmetric geometries, its application fails for analysis of rotor-stator interaction (RSI) in multi-stage turbomachinery flow. The inadequacy arises from the underlying geometry where the blade counts per row differ, since the blade counts are crafted to deter the destructive harmonic forces of synchronous blade passing. Therefore, to achieve the computational advantage of modeling a single blade passage per row while preserving the integrity of the RSI, a phase-lag boundary condition is adapted to OpenFOAM® software's incompressible pressure-based solver. The phase-lag construct is accomplished through restating the implicit periodic boundary condition as a constant boundary condition that is updated at each time step with phase-shifted data from the coupled cells adjacent to the boundary. Its effectiveness is demonstrated using a typical Francis hydroturbine modeled as single- and double-passages with phase-lag boundary conditions. The evaluation of the phase-lag condition is based on the correspondence of the overall computational performance and the calculated flow parameters of the phase-lag simulations with those of a baseline full-wheel simulation. Funded in part by DOE Award Number: DE-EE0002667.

  1. On the Flow Instabilities and Turbulent Kinetic Energy of Large-Scale Francis Hydroturbine Model at Low Flow Rate Conditions

    Directory of Open Access Journals (Sweden)

    Wen-Tao Su

    2014-07-01

    Full Text Available This paper is to make a better understanding of the flow instabilities and turbulent kinetic energy (TKE features in a large-scale Francis hydroturbine model. The flow instability with aspect of pressure oscillation and pressure-velocity correlation was investigated using large eddy simulation (LES method along with two-phase cavitation model. The numerical simulation procedures were validated by the existing experimental result, and further the TKE evolution was analyzed in a curvilinear coordinates. By monitoring the fluctuating pressure and velocities in the vanes’ wake region, the local pressure and velocity variations were proven to have a phase difference approaching π/2, with a reasonable cross-correlation coefficient. Also the simultaneous evolution of pressure fluctuations at the opposite locations possessed a clear phase difference of π, indicating the stresses variations on the runner induced by pressure oscillation were in an odd number of nodal diameter. Considering the TKE generation, the streamwise velocity component us′2 contributed the most to the TKE, and thus the normal stress production term and shear stress production term imparted more instability to the flow than other production terms.

  2. Les livres de recettes « francisés » au Mexique au XIXe siècle

    Directory of Open Access Journals (Sweden)

    Sarah Bak-Geller Corona

    2008-05-01

    Full Text Available L’apparition des premiers livres de cuisine au Mexique - publiés par des maisons d’édition françaises spécialisées en ouvrages en espagnol - marque le début de l’histoire de la cuisine mexicaine. Cet événement s’inscrit par ailleurs dans une histoire plus large : celle de la construction de l’État-nation, entre nationalisme et cosmopolitisme. L’article s’intéresse aux idéaux de nation et de cuisine cohabitant dans deux des livres de recettes francisés du XIXe siècle au Mexique : l’Arte novísimo de cocina et le Nuevo cocinero americano/mexicano en forma de diccionario.French-fashioned Mexican recipe books in the 19th century. Globalization and construction of a national culinary modelThe first Mexican recipe books were published in the early 1830’s by French publishing houses specialized in Spanish written books. This article deals with the different nationalistic and cuisine models in two French-fashioned Mexican recipe books -the Arte novísimo de cocina and the Nuevo cocinero americano/mexicano en forma de diccionario- and their relationship with the nation-building context in nineteenth century Mexico.

  3. Cavitation on a scaled-down model of a Francis turbine guide vane: high-speed imaging and PIV measurements

    Science.gov (United States)

    Pervunin, K. S.; Timoshevskiy, M. V.; Churkin, S. A.; Kravtsova, A. Yu; Markovich, D. M.; Hanjalić, K.

    2015-12-01

    Cavitation on two symmetric foils, a NACA0015 hydrofoil and a scaled-down model of a Francis turbine guide vane (GV), was investigated by high-speed visualization and PIV. At small attack angles the differences between the profiles of the mean and fluctuating velocities for both hydrofoils were shown to be insignificant. However, at the higher angle of incidence, flow separation from the GV surface was discovered for quasi-steady regimes including cavitation-free and cavitation inception cases. The flow separation leads to the appearance of a second maximum in velocity fluctuations distributions downstream far from the GV surface. When the transition to unsteady regimes occurred, the velocity distributions became quite similar for both foils. Additionally, for the GV an unsteady regime characterized by asymmetric spanwise variations of the sheet cavity length along with alternating periodic detachments of clouds between the sidewalls of the test channel was for the first time visualized. This asymmetric behaviour is very likely to be governed by the cross instability that was recently described by Decaix and Goncalvès [8]. Moreover, it was concluded that the existence of the cross instability is independent on the test body shape and its aspect ratio.

  4. A Reminiscence

    Science.gov (United States)

    Gobind Khorana, H.

    1997-12-01

    Leslie Orgel and Francis Crick with Gobind Khorana in Madison, Wisconsin (December 1965). I first met Leslie at the Endicott House (MIT) in February 1964. Leslie was then spending a period of time at MIT and the occasion was a party for him. During our conversation, Leslie talked about starting some experimental work. He seemed to be particularly interested in polyphosphates and the chemical activation of small molecules (building blocks). Shortly after his move to the Salk Institute in the Fall of 1964 I visited him in January 1965. He already had a lab going. I remember meeting Jim Ferris, in particular, and John Sulston sometime later. That particular time was exciting for my research as well. We had the first results on the Genetic Code using the chemical-biochemical approach that my lab had developed. Francis Crick was also at the Salk Institute during the time of my visit. Both Leslie and Francis were very excited by my results and they began to ask a lot of questions and gave me a whole lot of suggestions about further experiments. In fact, my thinking and planning of things that we were doing were so scrutinized and clarified during these discussions that, it seemed to me, my own group had only to turn out all the experiments that were needed. These interactions with Francis and Leslie continued intensively throughout that year and later. In fact, both Leslie and Francis accepted my invitation to Madison in December 1965 for more discussions. Since those early days of the Salk Institute, I have made numerous visits over the years to Leslie and his research group. It has always been very exciting to learn about the many discoveries bearing on chemical evolution that have unfolded from Leslie's research group. In addition, I have always benefitted from the insightful comments that Leslie invariably provided on my own research. I look forward to our continued interactions and friendship in the future. Leslie, A Happy Birthday!

  5. Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jiajia [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Yun; Wang, Jincheng [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China); Sun, Xiaoli; Cao, Rong [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Sun, Hao [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China); Department of Chemistry, Liaoning University, Shenyang 110000 (China); Huang, Chaonan [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Chen, Jiping, E-mail: chenjp@dicp.ac.cn [Key Laboratory of Separation Sciences for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023 (China)

    2015-05-04

    Highlights: • BPA imprinted polymer microspheres were prepared by Pickering emulsion polymerization. • Regular spherical shape and narrow diameter distribution. • Good specific adsorption capacity for BPA. • Good class-selectivity and clean-up efficiency for bisphenols in human urine under SPE mode. • Good recoveries and sensitivity for bisphenols using the MIPMS-SPE coupled with HPLC-DAD method. - Abstract: The bisphenol A (BPA) imprinted polymer microspheres were prepared by simple Pickering emulsion polymerization. Compared to traditional bulk polymerization, both high yields of polymer and good control of particle sizes were achieved. The characterization results of scanning electron microscopy and nitrogen adsorption–desorption measurements showed that the obtained molecularly imprinted polymer microsphere (MIPMS) particles possessed regular spherical shape, narrow diameter distribution (30–60 μm), a specific surface area (S{sub BET}) of 281.26 m{sup 2} g{sup −1} and a total pore volume (V{sub t}) of 0.459 cm{sup 3} g{sup −1}. Good specific adsorption capacity for BPA was obtained in the sorption experiment and good class selectivity for BPA and its seven structural analogs (bisphenol F, bisphenol B, bisphenol E, bisphenol AF, bisphenol S, bisphenol AP and bisphenol Z) was demonstrated by the chromatographic evaluation experiment. The MIPMS as solid-phase extraction (SPE) packing material was then evaluated for extraction and clean-up of these bisphenols (BPs) from human urine samples. An accurate and sensitive analytical method based on the MIPMS-SPE coupled with HPLC-DAD has been successfully established for simultaneous determination of eight BPs from human urine samples with detection limits of 1.2–2.2 ng mL{sup −1}. The recoveries of BPs for urine samples at two spiking levels (100 and 500 ng mL{sup −1} for each BP) were in the range of 81.3–106.7% with RSD values below 8.3%.

  6. Experimental evidence of inter-blade cavitation vortex development in Francis turbines at deep part load condition

    Science.gov (United States)

    Yamamoto, K.; Müller, A.; Favrel, A.; Avellan, F.

    2017-10-01

    Francis turbines are subject to various types of cavitation flow depending on the operating condition. To enable a smooth integration of the renewable energy sources, hydraulic machines are now increasingly required to extend their operating range, especially down to extremely low discharge conditions called deep part load operation. The inter-blade cavitation vortex is a typical cavitation phenomenon observed at deep part load operation. However, its dynamic characteristics are insufficiently understood today. In an objective of revealing its characteristics, the present study introduces a novel visualization technique with instrumented guide vanes embedding the visualization devices, providing unprecedented views on the inter-blade cavitation vortex. The binary image processing technique enables the successful evaluation of the inter-blade cavitation vortex in the images. As a result, it is shown that the probability of the inter-blade cavitation development is significantly high close to the runner hub. Furthermore, the mean vortex line is calculated and the vortex region is estimated in the three-dimensional domain for the comparison with numerical simulation results. In addition, the on-board pressure measurements on a runner blade is conducted, and the influence of the inter-blade vortex on the pressure field is investigated. The analysis suggests that the presence of the inter-blade vortex can magnify the amplitude of pressure fluctuations especially on the blade suction side. Furthermore, the wall pressure difference between pressure and suction sides of the blade features partially low or negative values near the hub at the discharge region where the inter-blade vortex develops. This negative pressure difference on the blade wall suggests the development of a backflow region caused by the flow separation near the hub, which is closely related to the development of the inter-blade vortex. The development of the backflow region is confirmed by the numerical

  7. Of the Helmholtz Club, South-Californian seedbed for visual and cognitive neuroscience, and its patron Francis Crick.

    Science.gov (United States)

    Aicardi, Christine

    2014-03-01

    Taking up the view that semi-institutional gatherings such as clubs, societies, research schools, have been instrumental in creating sheltered spaces from which many a 20th-century project-driven interdisciplinary research programme could develop and become established within the institutions of science, the paper explores the history of one such gathering from its inception in the early 1980s into the 2000s, the Helmholtz Club, which brought together scientists from such various research fields as neuroanatomy, neurophysiology, psychophysics, computer science and engineering, who all had an interest in the study of the visual system and of higher cognitive functions relying on visual perception such as visual consciousness. It argues that British molecular biologist turned South Californian neuroscientist Francis Crick had an early and lasting influence over the Helmholtz Club of which he was a founding pillar, and that from its inception, the club served as a constitutive element in his long-term plans for a neuroscience of vision and of cognition. Further, it argues that in this role, the Helmholtz Club served many purposes, the primary of which was to be a social forum for interdisciplinary discussion, where 'discussion' was not mere talk but was imbued with an epistemic value and as such, carefully cultivated. Finally, it questions what counts as 'doing science' and in turn, definitions of success and failure-and provides some material evidence towards re-appraising the successfulness of Crick's contribution to the neurosciences. Copyright © 2013 The Author. Published by Elsevier Ltd.. All rights reserved.

  8. SCAN TO BIM FOR 3D RECONSTRUCTION OF THE PAPAL BASILICA OF SAINT FRANCIS IN ASSISI IN ITALY

    Directory of Open Access Journals (Sweden)

    M. G. Angelini

    2017-05-01

    Full Text Available The historical building heritage, present in the most of Italian cities centres, is, as part of the construction sector, a working potential, but unfortunately it requires planning of more complex and problematic interventions. However, policies to support on the existing interventions, together with a growing sensitivity for the recovery of assets, determine the need to implement specific studies and to analyse the specific problems of each site. The purpose of this paper is to illustrate the methodology and the results obtained from integrated laser scanning activity in order to have precious architectural information useful not only from the cultural heritage point of view but also to construct more operative and powerful tools, such as BIM (Building Information Modelling aimed to the management of this cultural heritage. The Papal Basilica and the Sacred Convent of Saint Francis in Assisi in Italy are, in fact, characterized by unique and complex peculiarities, which require a detailed knowledge of the sites themselves to ensure visitor’s security and safety. For such a project, we have to take in account all the people and personnel normally present in the site, visitors with disabilities and finally the needs for cultural heritage preservation and protection. This aim can be reached using integrated systems and new technologies, such as Internet of Everything (IoE, capable of connecting people, things (smart sensors, devices and actuators; mobile terminals; wearable devices; etc., data/information/knowledge and processes to reach the desired goals. The IoE system must implement and support an Integrated Multidisciplinary Model for Security and Safety Management (IMMSSM for the specific context, using a multidisciplinary approach.

  9. Scan to Bim for 3d Reconstruction of the Papal Basilica of Saint Francis in Assisi in Italy

    Science.gov (United States)

    Angelini, M. G.; Baiocchi, V.; Costantino, D.; Garzia, F.

    2017-05-01

    The historical building heritage, present in the most of Italian cities centres, is, as part of the construction sector, a working potential, but unfortunately it requires planning of more complex and problematic interventions. However, policies to support on the existing interventions, together with a growing sensitivity for the recovery of assets, determine the need to implement specific studies and to analyse the specific problems of each site. The purpose of this paper is to illustrate the methodology and the results obtained from integrated laser scanning activity in order to have precious architectural information useful not only from the cultural heritage point of view but also to construct more operative and powerful tools, such as BIM (Building Information Modelling) aimed to the management of this cultural heritage. The Papal Basilica and the Sacred Convent of Saint Francis in Assisi in Italy are, in fact, characterized by unique and complex peculiarities, which require a detailed knowledge of the sites themselves to ensure visitor's security and safety. For such a project, we have to take in account all the people and personnel normally present in the site, visitors with disabilities and finally the needs for cultural heritage preservation and protection. This aim can be reached using integrated systems and new technologies, such as Internet of Everything (IoE), capable of connecting people, things (smart sensors, devices and actuators; mobile terminals; wearable devices; etc.), data/information/knowledge and processes to reach the desired goals. The IoE system must implement and support an Integrated Multidisciplinary Model for Security and Safety Management (IMMSSM) for the specific context, using a multidisciplinary approach.

  10. Hétérogenéité quantitative et qualitative de la matière organique dans les argiles du Kimmeridgien du val de Pickering (Yorkshire, UK). Cadre sédimentologique et stratigraphique Quantitative and Qualitative Heterogeneity of the Organic Matter Within the Kimmeridge Clay of the Vale of Pickering (Yorkshire, Uk). Sedimentological and Stratigraphical Framework

    OpenAIRE

    Penn I. E.; Herbin J. P.; Muller C.; Geyssant J. R.; Melieres F.

    2006-01-01

    Les argiles du Kimméridgien contribuent à l'alimentation de nombreux gisements en mer du Nord. L'étude de quatre puits localisés sur une coupe Est-Ouest dans le Val de Pickering (Bassin de Cleveland) permet d'illustrer dans cette formation l'hétérogénéité de distribution verticale et latérale de la matière organique en terme de quantité et de qualité. La coupe étudiée (35 km de long, 200 m de haut) représente environ 6,5 millions d'années d'histoire géologique. Les analyses minéralogiques mon...

  11. Hydro-acoustic resonance behavior in presence of a precessing vortex rope: observation of a lock-in phenomenon at part load Francis turbine operation

    International Nuclear Information System (INIS)

    Favrel, A; Landry, C; Müller, A; Yamamoto, K; Avellan, F

    2014-01-01

    Francis turbines operating at part load condition experience the development of a cavitating helical vortex rope in the draft tube cone at the runner outlet. The precession movement of this vortex rope induces local convective pressure fluctuations and a synchronous pressure pulsation acting as a forced excitation for the hydraulic system, propagating in the entire system. In the draft tube, synchronous pressure fluctuations with a frequency different to the precession frequency may also be observed in presence of cavitation. In the case of a matching between the precession frequency and the synchronous surge frequency, hydro-acoustic resonance occurs in the draft tube inducing high pressure fluctuations throughout the entire hydraulic system, causing torque and power pulsations. The risk of such resonances limits the possible extension of the Francis turbine operating range. A more precise knowledge of the phenomenon occurring at such resonance conditions and prediction capabilities of the induced pressure pulsations needs therefore to be developed. This paper proposes a detailed study of the occurrence of hydro-acoustic resonance for one particular part load operating point featuring a well-developed precessing vortex rope and corresponding to 64% of the BEP. It focuses particularly on the evolution of the local interaction between the pressure fluctuations at the precession frequency and the synchronous surge mode passing through the resonance condition. For this purpose, an experimental investigation is performed on a reduced scale model of a Francis turbine, including pressure fluctuation measurements in the draft tube and in the upstream piping system. Changing the pressure level in the draft tube, resonance occurrences are highlighted for different Froude numbers. The evolution of the hydro-acoustic response of the system suggests that a lock-in effect between the excitation frequency and the natural frequency may occur at low Froude number, inducing a hydro

  12. Upper limit to the deuterium abundance and a measurement of the pickering-β line in the low excitation planetary IC 418

    International Nuclear Information System (INIS)

    Le Vaux, H.A.

    1977-01-01

    The problem of detecting a weak spectrum line, deuterium alpha, very near in wavelength to H/sub alpha/, assumed to be thousands of times as strong, is discussed from the point of view of optimizing the signal-to-noise ratio. A spectrometer consisting of three pressure scanning Fabry-Perot etalons with low reflectivity coatings was found to be the best instrument for this experiment. While no feature attributable to deuterium was detected in the planetary nebula IC 418, an upper limit relative to hydrogen of 3.4 x 10 -5 was established at the 95% confidence level. The significance of this result is discussed in light of the role played by deuterium in cosmology. The intensity ratio of the Pickering beta line (n'' = 6, n' = 4 transition of ionized helium) relative to H/sub alpha/ was measured to be 6.5 x 10 -5 . Observations of the nebular continuum made at five wavelengths in the red and near infrared are summarized and compared with predicted intensities

  13. Fabrication of magnetic hydroxypropyl cellulose-g-poly(acrylic acid) porous spheres via Pickering high internal phase emulsion for removal of Cu(2+) and Cd(2.).

    Science.gov (United States)

    Zhu, Yongfeng; Zheng, Yian; Zong, Li; Wang, Feng; Wang, Aiqin

    2016-09-20

    A series of magnetic hydroxypropyl cellulose-g-poly(acrylic acid) porous spheres were prepared via O/W Pickering high internal phase emulsions (HIPEs) integrated precipitation polymerization. The structure and composition of modified Fe3O4 and porous structures were characterized by TEM, XRD, TGA and SEM. The results indicated that the silanized Fe3O4 can influence greatly the pore structure of magnetic porous sphere in addition to non-negligible impacts of the proportion of mixed solvent and co-surfactant. The adsorption experiment demonstrated that the adsorption equilibrium can be reached within 40min and the maximal adsorption capacity was 300.00mg/g for Cd(2+) and 242.72mg/g for Cu(2+), suggesting its fast adsorption kinetics and high adsorption capacity. After five adsorption-desorption cycles, no significant changes in the adsorption capacity were observed, suggesting its excellent reusability. The magnetic porous sphere can be easily separated from the solution and then find its potential as a recyclable material for highly efficient removal of heavy metals. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Fabrication and evaluation of chitosan/NaYF4:Yb3+/Tm3+ upconversion nanoparticles composite beads based on the gelling of Pickering emulsion droplets.

    Science.gov (United States)

    Yan, Huiqiong; Chen, Xiuqiong; Shi, Jia; Shi, Zaifeng; Sun, Wei; Lin, Qiang; Wang, Xianghui; Dai, Zihao

    2017-02-01

    The rare earth ion doped upconversion nanoparticles (UCNPs) synthesized by hydrophobic organic ligands possess poor solubility and low fluorescence quantum yield in aqueous media. To conquer this issue, NaYF 4 :Yb 3+ /Tm 3+ UCNPs, synthesized by a hydrothermal method, were coated with F127 and then assembled with chitosan to fabricate the chitosan/NaYF 4 :Yb 3+ /Tm 3+ composite beads (CS/NaYF 4 :Yb 3+ /Tm 3+ CBs) by Pickering emulsion system. The characterization results revealed that the as-synthesized NaYF 4 :Yb 3+ /Tm 3+ UCNPs with an average size of 20nm exhibited spherical morphology, high crystallinity and characteristic emission upconversion fluorescence with an overall blue color output. The NaYF 4 :Yb 3+ /Tm 3+ UCNPs were successfully conjugated on the surface of chitosan beads by the gelling of emulsion droplets. The resultant CS/NaYF 4 :Yb 3+ /Tm 3+ CBs showed good upconversion luminescent property, drug-loading capacity, release performance and excellent biocompatibility, exhibiting great potentials in targeted drug delivery and tissue engineering with potential tracking capability and lasting release performance. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Re-diseño de la línea de ejes de turbinas Francis de salto elevado para la mejora de su competitividad

    OpenAIRE

    GARCÍA MÓNACO, ALEJANDRO

    2015-01-01

    El objetivo de este proyecto es mejorar la línea de ejes de las turbinas Francis de eje horizontal. En especial, se ha trabajado con aquellas máquinas diseñadas para funcionar con saltos de agua elevados. El proyecto surge del conocimiento de importantes ventajas económicas de las turbinas horizontales frente a las verticales y de la voluntad por parte de ALSTOM HYDRO de mejorar los rendimientos de las primeras para hacerlas más competitivas. Los capítulos 3 y 4 son introductorios a la pro...

  16. Espíritos cheios de bichos: A fauna nas viagens de Louis Agassiz e Richard Francis Burton pelo Brasil oitocentista

    Directory of Open Access Journals (Sweden)

    Janaina Zito Losada

    2015-04-01

    Full Text Available O Brasil do século XIX foi alvo de inúmeras viagens realizadas por cientistas estrangeiros. O objetivo deste artigo é analisar as impressões sobre a fauna brasileira presentes nos relatos das viagens realizadas pelo naturalista suíço Louis Agassiz, em 1865, e pelo explorador inglês Richard Francis Burton, em 1868. Destes relatos privilegiam-se as descrições do meio natural de diferentes regiões brasileiras e das particularidades da fauna silvestre por eles encontrada.

  17. okoronkwo, ike francis

    African Journals Online (AJOL)

    Valued Acer Customer

    chain of events. Among these is a mass participation of people into an emerging global culture ... the enormous fluidities of location and identity, are the imperatives of existence of our age. .... searched for a plastic reality a year later and this became the beginning of sourcing imagery from electronic ..... Superpower in Africa.

  18. Making and Selling the “Rock Star Pope”: The Celebritization of Pope Francis during His Five-Day Visit to the Philippines

    Directory of Open Access Journals (Sweden)

    Gerry M. Lanuza

    2017-12-01

    Full Text Available This paper is an attempt to provide an analysis of the celebritization and celebrification of Pope Francis when he visited the Philippines from January 15 to 19, 2015. Employing the analytic concept of “culture industry” developed by the members of the Frankfurt School, and combining it with the current analyses in existing celebrity study under late capitalism, this paper will show how the local giant media corporations, namely, GMA and ABS-CBN, staged a grand “media event” that nationally mediatized and publicly magnified the celebrity status of the so-called “rock star Pope.” The current study contributes to the growing literature on celebrity study by focusing on the popular and charismatic religious leader of 1.2 billion Catholics worldwide. Toward the end of this paper, consistent with the critical slant of the Frankfurt School’s critique of mass deception, it is argued that the celebrity culture that created the “spectacle” of Pope Francis must be distinguished from his prophetic message. And this must be explored in future studies.

  19. Experimental investigation of the sloshing motion of the water free surface in the draft tube of a Francis turbine operating in synchronous condenser mode

    Science.gov (United States)

    Vagnoni, Elena; Favrel, Arthur; Andolfatto, Loïc; Avellan, François

    2018-06-01

    Hydropower units may be required to operate in condenser mode to supply reactive power. In this operating mode, the water level in the turbine or pump-turbine is decreased below the runner by closing the guide vanes and injecting pressurized air. While operating in condenser mode the machine experiences power losses due to several air-water interaction phenomena which cause air losses. One of such phenomena is the sloshing motion of the water free surface below the runner in the draft tube cone of a Francis turbine. The objective of the present work is to experimentally investigate the sloshing motion of the water free surface in the draft tube cone of a reduced scale physical model of a Francis turbine operating in condenser mode. Images acquisition and simultaneous pressure fluctuation measurements are performed and an image processing method is developed to investigate amplitude and frequency of the sloshing motion of the free surface. It is found that this motion is excited at the natural frequency of the water volume and corresponds to the azimuthal wavenumber m = 1 of a rotating gravity wave. The amplitude of the motion is perturbed by wave breaking and it decreases by increasing the densimetric Froude number. The sloshing frequency slightly increases with respect to the natural frequency of the water volume by increasing the densimetric Froude number. Moreover, it results that this resonant phenomenon is not related to the torque perturbation.

  20. Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples.

    Science.gov (United States)

    Yang, Jiajia; Li, Yun; Wang, Jincheng; Sun, Xiaoli; Cao, Rong; Sun, Hao; Huang, Chaonan; Chen, Jiping

    2015-05-04

    The bisphenol A (BPA) imprinted polymer microspheres were prepared by simple Pickering emulsion polymerization. Compared to traditional bulk polymerization, both high yields of polymer and good control of particle sizes were achieved. The characterization results of scanning electron microscopy and nitrogen adsorption-desorption measurements showed that the obtained molecularly imprinted polymer microsphere (MIPMS) particles possessed regular spherical shape, narrow diameter distribution (30-60 μm), a specific surface area (S(BET)) of 281.26 m(2) g(-1) and a total pore volume (V(t)) of 0.459 cm(3) g(-1). Good specific adsorption capacity for BPA was obtained in the sorption experiment and good class selectivity for BPA and its seven structural analogs (bisphenol F, bisphenol B, bisphenol E, bisphenol AF, bisphenol S, bisphenol AP and bisphenol Z) was demonstrated by the chromatographic evaluation experiment. The MIPMS as solid-phase extraction (SPE) packing material was then evaluated for extraction and clean-up of these bisphenols (BPs) from human urine samples. An accurate and sensitive analytical method based on the MIPMS-SPE coupled with HPLC-DAD has been successfully established for simultaneous determination of eight BPs from human urine samples with detection limits of 1.2-2.2 ng mL(-1). The recoveries of BPs for urine samples at two spiking levels (100 and 500 ng mL(-1) for each BP) were in the range of 81.3-106.7% with RSD values below 8.3%. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Facile fabrication of poly(L-lactic acid) microsphere-incorporated calcium alginate/hydroxyapatite porous scaffolds based on Pickering emulsion templates.

    Science.gov (United States)

    Hu, Yang; Ma, Shanshan; Yang, Zhuohong; Zhou, Wuyi; Du, Zhengshan; Huang, Jian; Yi, Huan; Wang, Chaoyang

    2016-04-01

    In this study, we develop a facile one-pot approach to the fabrication of poly(L-lactic acid) (PLLA) microsphere-incorporated calcium alginate (ALG-Ca)/hydroxyapatite (HAp) porous scaffolds based on HAp nanoparticle-stabilized oil-in-water Pickering emulsion templates, which contain alginate in the aqueous phase and PLLA in the oil phase. The emulsion aqueous phase is solidified by in situ gelation of alginate with Ca(2+) released from HAp by decreasing pH with slow hydrolysis of D-gluconic acid δ-lactone (GDL) to produce emulsion droplet-incorporated gels, followed by freeze-drying to form porous scaffolds containing microspheres. The pore structure of porous scaffolds can be adjusted by varying the HAp or GDL concentration. The compressive tests show that the increase of HAp or GDL concentration is beneficial to improve the compressive property of porous scaffolds, while the excessive HAp can lead to the decrease in compressive property. Moreover, the swelling behavior studies display that the swelling ratios of porous scaffolds reduce with increasing HAp or GDL concentration. Furthermore, hydrophobic drug ibuprofen (IBU) and hydrophilic drug bovine serum albumin (BSA) are loaded into the microspheres and scaffold matrix, respectively. In vitro drug release results indicate that BSA has a rapid release while IBU has a sustained release in the dual drug-loaded scaffolds. In vitro cell culture experiments verify that mouse bone mesenchymal stem cells can proliferate on the porous scaffolds well, indicating the good biocompatibility of porous scaffolds. All these results demonstrate that the PLLA microsphere-incorporated ALG-Ca/HAp porous scaffolds have a promising potential for tissue engineering and drug delivery applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Human radiation studies: Remembering the early years: Oral history of cell biologist Don Francis Petersen, Ph.D., conducted November 29, 1994

    International Nuclear Information System (INIS)

    1995-08-01

    This report is a transcript of an interview of Dr. Don Francis Petersen by representatives of the US DOE Office of Human Radiation Experiments. Dr. Petersen was selected for this interview because of his long research career at Los Alamos and his knowledge of the Atomic Energy Commission's biomedical program. Dr. Petersen did not personally conduct research on human subjects. After a brief biographical sketch Dr. Petersen discusses his remembrances of the early use of radionuclides as biological tracers, aspects of nuclear weapons testing in the 1940's and 1950's including fallout studies, the means by which research projects were approved, use of humans in the whole-body counter, and the Health Division Biomedical responsibilities

  3. 3D fluid-structure modelling and vibration analysis for fault diagnosis of Francis turbine using multiple ANN and multiple ANFIS

    Science.gov (United States)

    Saeed, R. A.; Galybin, A. N.; Popov, V.

    2013-01-01

    This paper discusses condition monitoring and fault diagnosis in Francis turbine based on integration of numerical modelling with several different artificial intelligence (AI) techniques. In this study, a numerical approach for fluid-structure (turbine runner) analysis is presented. The results of numerical analysis provide frequency response functions (FRFs) data sets along x-, y- and z-directions under different operating load and different position and size of faults in the structure. To extract features and reduce the dimensionality of the obtained FRF data, the principal component analysis (PCA) has been applied. Subsequently, the extracted features are formulated and fed into multiple artificial neural networks (ANN) and multiple adaptive neuro-fuzzy inference systems (ANFIS) in order to identify the size and position of the damage in the runner and estimate the turbine operating conditions. The results demonstrated the effectiveness of this approach and provide satisfactory accuracy even when the input data are corrupted with certain level of noise.

  4. Validation of mathematical models for predicting the swirling flow and the vortex rope in a Francis turbine operated at partial discharge

    DEFF Research Database (Denmark)

    Kuibin, P.A.; Okulov, Valery; Susan-Resiga, R.F.

    2010-01-01

    recover all this information without actually computing the full three-dimensional unsteady flow in the hydraulic turbine. As a result, we provide valuable mathematical tools for assessing the turbine behaviour at off-design operating regimes in the early stages of runner design, with computational effort......The vortex rope in a hydro turbine draft tube is one the main and strong sources of pulsations in non-optimal modes of hydro turbine operation. We examine the case of a Francis turbine model operated at partial discharge, where a strong precessing vortex rope is developed in the discharge cone...... several orders of magnitude less than the current approaches of simulating the complex turbine flow....

  5. The Language of Colours. A Semiotic Analysis of Colours and Symbolic Imagery in Francis Ford Coppola’s "Bram Stoker’s Dracula" (1992

    Directory of Open Access Journals (Sweden)

    Veronika Bernard

    2011-10-01

    Full Text Available Reviews referring to Francis Ford Coppola’s Columbia Pictures Bram Stoker’s Dracula classic of 1992 recurrently mention the images owing to the camera work of Michael Ballhaus as the striking feature of the movie and highly praise them for their thematically coherent effect.. The colours, if mentioned at all, leave reviewers undecided to sceptical when it comes to evaluating their contribution to the overall composition of the film, though. By providing a semiotic analysis of colours and symbolic imagery the below article will show how colours and imagery in their inter-relatedness create coherence and cohesion with Coppola’s interpretation of Stoker’s Dracula as a religiously inspired morality play set in the context of Victorian cultural values and self-perception.

  6. Human radiation studies: Remembering the early years: Oral history of cell biologist Don Francis Petersen, Ph.D., conducted November 29, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This report is a transcript of an interview of Dr. Don Francis Petersen by representatives of the US DOE Office of Human Radiation Experiments. Dr. Petersen was selected for this interview because of his long research career at Los Alamos and his knowledge of the Atomic Energy Commission`s biomedical program. Dr. Petersen did not personally conduct research on human subjects. After a brief biographical sketch Dr. Petersen discusses his remembrances of the early use of radionuclides as biological tracers, aspects of nuclear weapons testing in the 1940`s and 1950`s including fallout studies, the means by which research projects were approved, use of humans in the whole-body counter, and the Health Division Biomedical responsibilities.

  7. Richard Francis Burton e a inserÃÃo do kama-sutras como um manual sexual entre os vitorianos (Inglaterra, 1883)

    OpenAIRE

    Felipe Salvador Weissheimer

    2014-01-01

    Dentre os vÃrios âKama-sutrasâ difundidos no mercado, a versÃo clÃssica foi escrita por Vatsyayana (sÃculo I-IV, aproximadamente) e publicada na Inglaterra em 1883 pela Sociedade Hindu Kama-Shastra. Richard Francis Burton foi o membro de maior importÃncia na Sociedade Hindu Kama-Shastra, pois, alÃm de fomentar a publicaÃÃo, auxiliou na traduÃÃo, editou e enunciou vÃrios comentÃrios ao longo da obra. Em seus comentÃrios, percebemos que o projeto da traduÃÃo e publicaÃÃo do Kama-sutras visava e...

  8. Los usos políticos del cuerpo: los dos cuerpos del rey en la filosofía política de Francis Bacon

    Directory of Open Access Journals (Sweden)

    Silvia Manzo

    2008-01-01

    Full Text Available Como figure destacada en el complejo escenario político de la transición entre la dinastía Tudor y la dinastía Estuardo de Inglaterra, Francis Bacon (1561-1626 adoptó la teoría de los dos cuerpos del rey en sus textos políticos y jurídicos. Su uso de esta teoría tiene una estrecha conexión con conceptos centrales de su filosofía natural que testimonia la profunda conexión que Bacon encuentra entre la política y la naturaleza. En este trabajo, analizaré su utilización de la teoría medieval de los dos cuerpos del rey y la vinculación que esta tiene con el resto de la filosofía baconiana. Tomaré como eje para el análisis su discurso sobre la naturalización de los escoceses nacidos después de la subida al trono de James I, donde Bacon trata el concepto de los dos cuerpos del rey con más profundidad.As a prominent intellectual figure in the complex political arena of England, during the transition from Tudor to Stuart dinasties, Francis Bacon (1561-1626 assumes the medieval King's two bodies theory in his political and juridical writings. His use of this theory is extremely linked to central concepts of his natural philosphy, which testifies to the deep connection that Bacon finds between politics and nature. This paper addresses Bacon's use of the King's two bodies theory and its link to the rest of the Baconian philosophy. The focus of this study will be his discourse on the naturalization of Scots born after James I assumption of power, where Bacon deals more deeply with the King's two bodies theory.

  9. Study of the use of a micro hydro in knockdown container completed with a cylindrical form housing of francis hydraulic turbine to support the development program of energy self-sustainability for remote and isolated areas in Indonesia

    Directory of Open Access Journals (Sweden)

    Kamal Samsul

    2017-01-01

    It shows that the implementation of the unit in a remote area has reduced the total site construction time by 1/3 compared to the predicted one with conventional unit. The performance of the Francis turbine with cylindrical form housing has shown comparable with the conventional one which has volute form housing. The superiority was even more pronounced by introducing a deflection insert in its input flow channel. The insertion was capable to create more distributed flow into the runner. Efficiency of the turbine up to 80% was performed in this research. Local manufacture for turbine usually use many craft work and welding to built a volute form housing for the Francis turbine. The cylindrical form housing here has also proven significantly in reducing the time and price for the turbine manufacturing process.

  10. Fabrication and evaluation of chitosan/NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} upconversion nanoparticles composite beads based on the gelling of Pickering emulsion droplets

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Huiqiong; Chen, Xiuqiong; Shi, Jia; Shi, Zaifeng; Sun, Wei; Lin, Qiang, E-mail: linqianggroup@163.com; Wang, Xianghui; Dai, Zihao

    2017-02-01

    The rare earth ion doped upconversion nanoparticles (UCNPs) synthesized by hydrophobic organic ligands possess poor solubility and low fluorescence quantum yield in aqueous media. To conquer this issue, NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} UCNPs, synthesized by a hydrothermal method, were coated with F127 and then assembled with chitosan to fabricate the chitosan/NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} composite beads (CS/NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} CBs) by Pickering emulsion system. The characterization results revealed that the as-synthesized NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} UCNPs with an average size of 20 nm exhibited spherical morphology, high crystallinity and characteristic emission upconversion fluorescence with an overall blue color output. The NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} UCNPs were successfully conjugated on the surface of chitosan beads by the gelling of emulsion droplets. The resultant CS/NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} CBs showed good upconversion luminescent property, drug-loading capacity, release performance and excellent biocompatibility, exhibiting great potentials in targeted drug delivery and tissue engineering with potential tracking capability and lasting release performance. - Highlights: • NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} UCNPs were coated by F127 to improve aqueous dispersibility. • NaYF{sub 4}:Yb{sup 3+}/Tm{sup 3+} UCNPs were assembled with chitosan to fabricate the composite beads (CMs). • Pickering emulsions stabilized by UCNPs exhibited uniform and satisfactory emulsion droplets. • The CMs prepared by the gelling of emulsion droplet preserved upconversion luminescent property. • The resultant CMs showed good drug-loading capacity, release performance and biocompatibility.

  11. Toward an epistemology of nano-technosciences: Probing technoscience from a historical perspective: on today's surprising prevalence and relevance of Francis Bacon.

    Science.gov (United States)

    Schmidt, Jan C

    2011-12-01

    This paper aims to contribute to the attempts to clarify and classify the vague notion of "technosciences" from a historical perspective. A key question that is raised is as follows: Does Francis Bacon, one of the founding fathers of the modern age, provide a hitherto largely undiscovered programmatic position, which might facilitate a more profound understanding of technosciences? The paper argues that nearly everything we need today for an ontologically well-informed epistemology of technoscience can be found in the works of Bacon-this position will be called epistemological real-constructivism. Rather than realist or constructivist, empiricist or rationalist, Bacon's position can best be understood as real-constructivist since it challenges modern dichotomies. Reflection upon the contemporary relevance of Bacon could contribute to the expanding and critical discussion on technoscience. In the following I will reconstruct the term "technoscience". My finding is that at least four different understandings or types of the term "technoscience" co-exist. In a second step, I will analyze and elaborate on Bacon's epistemological position. I will identify central elements of the four different understandings in Bacon's work. Finally, I will conclude that the epistemology of technoscience is, indeed, very old-it is the epistemological position put forward by Bacon.

  12. Gossip; Gift and Commodity in Francis Coventry’s History of Pompey the Little; or; The Life and Adventures of a Lap-Dog (1751

    Directory of Open Access Journals (Sweden)

    Ana Vogrinčič

    2007-06-01

    Full Text Available Francis Coventry’s History of Pompey the Little represents one of the better known examples of today otherwise neglected eighteenth-century English novels of non human-characters. By pointing at thus far unacknowledged dimensions of the text; the article challenges the established reading of the book as put forward by Liz Bellamy in the theory of the ‘novels of circulation’. According to Bellamy; the peregrinating animals and objects of these narratives represent circulating commodities and thus symbolize alienated commercial society. Demonstrating that Pompey the lapdog rather functions as a gift and a gossip; this essay offers an alternative interpretation which opens up a different perspective on Coventry’s representation of society. Following from this; the paper aims at situating Pompey the Little’ within broader socio-cultural context of eighteenth-century England; as well as reflects on its place in fiction of the period. As such it advocates socio-historical approaches to literature.

  13. A Portrait of the Rebel as an Artist: Deconstructing Post-coloniality in Francis Stuart’s Black List, Section H

    Directory of Open Access Journals (Sweden)

    Shahriyar Mansouri

    2016-03-01

    Full Text Available The historically ‘interrogative’ nature of the modern Irish novel introduces post-independence Ireland as a locus that is torn between social double standards and political extremes. Rebellious and critical voices channelled through the dialectical discourse of the novel and at once critiqued a State-sponsored voice of internal othering and narratives of decolonization. To sustain its relevance as a medium of criticism the modern Irish novel replaced the classical structure of the novel with narratives that tend to deconstruct the State’s politics of formation. These narratives, this paper suggests, are inherently personal and structurally biographical, enabling the Irish to revisit the past and restructure their perception of critical concepts such as national identity, ideological intolerance, and individual formation. By examining Francis Stuart’s Black List, Section H (1971, and John McGahern’s The Dark (1965, firstly I will identify these resistant voices, which challenged and subverted the socio-political, and educational boundaries. Secondly, I will explore a dividing line that appeared between such critical voices, splitting them into critics who sought a liberated definition of Irishness rooted in the principles of the men of 1916, and rebels who demanded social recognition and political and commercial success. It is the latter group, I argue, that instead of enhancing the standards of life in Ireland became a threat to its very foundation.

  14. Model and prototype investigations of upper partial load unsteady phenomena on the Francis turbine designed for head up to 120 m

    International Nuclear Information System (INIS)

    Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" data-affiliation=" (OJSC Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" >Kuznetsov, I; Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" data-affiliation=" (OJSC Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" >Zakharov, A; Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" data-affiliation=" (OJSC Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" >Arm, V; Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" data-affiliation=" (OJSC Power Machines - LMZ, Saint-Petersburg, str. Vatutina 3A (Russian Federation))" >Akulaev, R

    2014-01-01

    The upper partial load unsteady phenomena are often observed at model tests for Francis turbine with high and middle specific speed. It is appears approximately between 7085% of optima point discharge for constant unit speed value and has accompanied by additional phenomenon with much higher frequency than draft tube vortex precession frequency and also runner rotational frequency. There are some discussions about nature of this phenomena and transposition of unsteady model test results to the prototype. In this paper are presented the results of above mentioned phenomena model investigations and some results of investigation at prototype turbine. Based on the results of model tests the following extensive data have been obtained: pressure fluctuation in the draft tube cone and spiral case, axial force fluctuations, it is demonstrated the significant influence of cavitation on upper partial load unsteady phenomena. The result of measurements of bearing vibrations and pressure pulsations are presented for prototype turbine at corresponded or very close operation points to model. In accordance with obtained data it is demonstrated that at upper partial load operation the unsteady phenomenon is observed as for the model also for the prototype turbine. On the base of model investigation has been demonstrated the influence of air admission and special design solutions to diminish unsteady phenomena at upper partial load range. All investigations were based on the physical experiment. Thus, based on model and prototype experimental investigations it is obtained additional information about upper partial load unsteady phenomenon and confirmed the transposition of model results to prototype turbine

  15. Characterization of Fish Passage Conditions through a Francis Turbine, Spillway, and Regulating Outlet at Detroit Dam, Oregon, Using Sensor Fish, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, Joanne P.; Carlson, Thomas J.

    2011-05-06

    Fish passage conditions through two spillways, a Francis turbine, and a regulating outlet (RO) at Detroit Dam on the North Santiam River in Oregon were evaluated by Pacific Northwest National Laboratory for the U.S. Army Corps of Engineers (USACE), Portland District, using Sensor Fish devices. The objective of the study was to describe and compare passage exposure conditions, identifying potential fish injury regions within the routes. The study was performed in July, October, and December 2009 concurrent with HI-Z balloon-tag studies by Normandeau Associates, Inc. Sensor Fish data were analyzed to estimate 1) exposure conditions, particularly exposure to severe strike, collision, and shear events by passage route sub-regions; 2) differences in passage conditions between passage routes; and 3) relationships to live-fish injury and mortality data estimates. Comparison of the three passage routes evaluated at Detroit Dam indicates that the RO passage route through the 5-ft gate opening was relatively the safest route for fish passage under the operating conditions tested; turbine passage was the most deleterious. These observations were supported also by the survival and malady estimates obtained from live-fish testing. Injury rates were highest for turbine and spillway passage. However, none of the passage routes tested is safe for juvenile salmonid passage.

  16. Sloshing motion dynamics of a free surface in the draft tube cone of a Francis turbine operating in synchronous condenser mode

    Science.gov (United States)

    Vagnoni, Elena; Andolfatto, Loïc; Favrel, Arthur; Avellan, François

    2016-11-01

    The penetration of the electrical grid by intermittent renewable energy sources induces grid fluctuations which must be compensated in order to guarantee the stability of the grid. Hydropower plants can supply reactive power to ensure the grid stabilization by operating in condenser mode. In this operating mode, the turbine operates with the tail water depressed to let the runner spin in air to reduce the power consumption. Pressurized air is injected in the draft tube cone to maintain the water level below the runner and this induces air-water interaction phenomena which cause important power losses. Flow visualization and pressure fluctuation measurements are performed in a reduced scale physical model of a Francis turbine operating in condenser mode to investigate the dynamics of the air-water interaction in the draft tube cone which causes the sloshing motion of the free surface. An image post-processing method is developed, enabling a quantitative description of the sloshing motion. The latter depends on the Froude number. By increasing the value of the Froude number, the amplitude of the sloshing motion decreases, as well as the amplitude of the pressure fluctuations. The frequency of the sloshing motion corresponds to the first natural frequency of the water volume.

  17. Investigation of the fluid-structure interaction of a high head Francis turbine using OpenFOAM and Code_Aster

    Science.gov (United States)

    Eichhorn, M.; Doujak, E.; Waldner, L.

    2016-11-01

    The increasing energy consumption and highly stressed power grids influence the operating conditions of turbines and pump turbines in the present situation. To provide or use energy as quick as possible, hydraulic turbines are operated more frequent and over longer periods of time in lower part load at off-design conditions. This leads to a more turbulent behavior and to higher requirements of the strength of stressed components (e.g. runner, guide or stay vanes). The modern advantages of computational capabilities regarding numerical investigations allow a precise prediction of appearing flow conditions and thereby induced strains in hydraulic machines. This paper focuses on the calculation of the unsteady pressure field of a high head Francis turbine with a specific speed of nq ≈ 24 min-1 and its impact on the structure at different operating conditions. In the first step, unsteady numerical flow simulations are performed with the open-source CFD software OpenFOAM. To obtain the appearing dynamic flow phenomena, the entire machine, consisting of the spiral casing, the stay vanes, the wicket gate, the runner and the draft tube, is taken into account. Additionally, a reduced model without the spiral casing and with a simplified inlet boundary is used. To evaluate the accuracy of the CFD simulations, operating parameters such as head and torque are compared with the results of site measurements carried out on the corresponding prototype machine. In the second part, the obtained pressure fields are used for a fluid-structure analysis with the open-source Finite Element software Code_Aster, to predict the static loads on the runner.

  18. The Battle Between the Biometricians and the Mendelians: How Sir Francis Galton's Work Caused his Disciples to Reach Conflicting Conclusions About the Hereditary Mechanism

    Science.gov (United States)

    Gillham, Nicholas W.

    2015-01-01

    Francis Galton, Charles Darwin's cousin, had wide and varied interests. They ranged from exploration and travel writing to fingerprinting and the weather. After reading Darwin's On the Origin of Species, Galton reached the conclusion that it should be possible to improve the human stock through selective breeding, as was the case for domestic animals and cultivated plants. Much of the latter half of Galton's career was devoted to trying to devise methods to distinguish men of good stock and then to show that these qualities were inherited. But along the way he invented two important statistical methods: regression and correlation. He also discovered regression to the mean. This led Galton to believe that evolution could not proceed by the small steps envisioned by Darwin, but must proceed by discontinuous changes. Galton's book Natural Inheritance (1889) served as the inspiration for Karl Pearson, W.F.R. Weldon and William Bateson. Pearson and Weldon were interested in continuously varying characters and the application of statistical techniques to their study. Bateson was fascinated by discontinuities and the role they might play in evolution. Galton proposed his Law of Ancestral Heredity in the last decade of the nineteenth century. At first this seemed to work well as an explanation for continuously varying traits of the type that interested Pearson and Weldon. In contrast, Bateson had published a book on discontinuously varying traits so he was in a position to understand and embrace Mendel's principles of inheritance when they were rediscovered in 1900. The subsequent battle between Weldon and Pearson, the biometricians, and Bateson, the Mendelian, went on acrimoniously for several years at the beginning of the twentieth century before Mendelian theory finally won out.

  19. Vortical structures and pressure pulsations in draft tube of a Francis-99 turbine at part load: RANS and hybrid RANS/LES analysis

    International Nuclear Information System (INIS)

    Gavrilov, A.A.; Sentyabov, A.V.; Dekterev, A.A.; Hanjalić, K.

    2017-01-01

    Highlights: • Simulations showed the formation of spiralling coherent vortices in the draft tube. • Both hybrid RANS-LES and Re-stress models reproduced well the measured fluctuations. • Re-stress model resolved the precessing vortex core and coherent spiralling vortices. - Abstract: Recognizing the limitations of the conventional linear-eddy-viscosity (LEVM) Reynolds-averaged Navier–Stokes (RANS) models to reproduce complex three-dimensional unsteady flows in hydraulic machinery, we performed a comparative assessment of a second-moment (Re-stress model, RSM) RANS closure and a hybrid RANS/LES method in capturing the flow and vortical structures in the draft tube of a Francis hydroturbine at off-design conditions. Considered is a case of part load (PL) at a flow rate of only 35% of the best efficiency point (BEP) characterised by multiple unsteady vortex systems. Despite some remaining uncertainties in generating the inflow conditions, both approaches reproduced reasonably well the measured mean velocity and the rms of its fluctuations, as well as the pressure spectrum with peaks detecting the precessing vortex core. In contrast to the common LEVMs, the Re-stress closure showed sufficient receptivity to intrinsic unsteadiness and reproduced well the overall flow and vortical patterns as well as the associated pressure pulsations in accord with the experiments. The hybrid RANS/LES method gave similar predictions as the RSM, but resolving a wider range of scales, which however, showed no significant effect on the dynamics of the dominant processing vortex core and the pressure pulsations.

  20. Preliminary study for the revitalisation of the 'Duersteller' small hydropower installation in Wetzikon, Switzerland; Vorstudie Kleinwasserkraftwerk J. Duersteler and Co AG Wetzikon ZH. Revitalisierungsvorhaben des Kraftwerkes mit seinen 80-jaehrigen Francis-Doppelturbinen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) discusses the possibility of revitalising an 80-year-old, small industrial hydropower plant fitted with twin Francis turbines. The present situation and the condition of the turbines and their associated water channels are described and the hydrological data of the Aabach stream is presented. Details are given on the presently installed technical apparatus and the legal and ownership situation. Environmental and historical aspects are discussed. The economics of the proposed revitalisation project are discussed and possible restrictions that could be enforced by the authorities are looked at. The report is concluded with recommendations for further action.

  1. Influence of Hydraulic Design on Stability and on Pressure Pulsations in Francis Turbines at Overload, Part Load and Deep Part Load based on Numerical Simulations and Experimental Model Test Results

    International Nuclear Information System (INIS)

    Magnoli, M V; Maiwald, M

    2014-01-01

    Francis turbines have been running more and more frequently in part load conditions, in order to satisfy the new market requirements for more dynamic and flexible energy generation, ancillary services and grid regulation. The turbines should be able to be operated for longer durations with flows below the optimum point, going from part load to deep part load and even speed-no-load. These operating conditions are characterised by important unsteady flow phenomena taking place at the draft tube cone and in the runner channels, in the respective cases of part load and deep part load. The current expectations are that new Francis turbines present appropriate hydraulic stability and moderate pressure pulsations at overload, part load, deep part load and speed-no-load with high efficiency levels at normal operating range. This study presents series of investigations performed by Voith Hydro with the objective to improve the hydraulic stability of Francis turbines at overload, part load and deep part load, reduce pressure pulsations and enlarge the know-how about the transient fluid flow through the turbine at these challenging conditions. Model test measurements showed that distinct runner designs were able to influence the pressure pulsation level in the machine. Extensive experimental investigations focused on the runner deflector geometry, on runner features and how they could reduce the pressure oscillation level. The impact of design variants and machine configurations on the vortex rope at the draft tube cone at overload and part load and on the runner channel vortex at deep part load were experimentally observed and evaluated based on the measured pressure pulsation amplitudes. Numerical investigations were employed for improving the understanding of such dynamic fluid flow effects. As example for the design and experimental investigations, model test observations and pressure pulsation curves for Francis machines in mid specific speed range, around n qopt = 50

  2. Pekingi punased olümpiamedalid / Leslie Leino

    Index Scriptorium Estoniae

    Leino, Leslie

    2007-01-01

    Autor käsitleb Eesti poliitikute artikleid, mis puudutasid Hiina olümpiamängude boikottimise teemat. Ta leiab, et peaksime inimõiguste ja muid probleeme tõstatama ratsionaalsetes piirides. Hiinas endas väideldakse juba ammu inimõiguste teemal. Mõõdukas probleemidele osutamine näitab Eesti selgroogu

  3. Special Problems in Teaching Leslie Marmon Silko's "Ceremony."

    Science.gov (United States)

    Allen, Paula Gunn

    1990-01-01

    A professor of American Indian literature describes the ethical dilemma she faces when teaching "Ceremony," a novel built around spiritual beliefs and activities at Laguna Pueblo. Her pedagogical duty to provide students with the most complete coherent information possible conflicts directly with respect for the secrecy surrounding…

  4. Postmodernism, phenomenology and afriphenomenology | Francis ...

    African Journals Online (AJOL)

    In this paper, I aimed to study the relationship between postmodernism and phenomenology. In the study, I established that postmodernism and phenomenology bear similar ontological marking, which base their concepts and methodologies on an individualistic framework. On the basis of such ontological framework, ...

  5. St Francis Hydro, Soils data

    Data.gov (United States)

    U.S. Environmental Protection Agency — We collected data 2012-2016 covering spatially-explicit, soil layering, bulk density, drainage rate (2012, 2015) infiltration into rain garden mulch and mineral soil...

  6. Identiteet ja migratsioon / Francis Fukuyama

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2007-01-01

    Autor peab islamiäärmuslust immigrantide identiteedikriisi ilminguks ning arutleb identiteedipoliitika olemuse ja tuleviku üle Euroopa ja Ameerika postmodernses multikultuurilises ühiskonnas. Vt. samas: Jeffrey Goldstein: Euroopa ja USA - konkurendid või partnerid

  7. Hétérogenéité quantitative et qualitative de la matière organique dans les argiles du Kimmeridgien du val de Pickering (Yorkshire, UK. Cadre sédimentologique et stratigraphique Quantitative and Qualitative Heterogeneity of the Organic Matter Within the Kimmeridge Clay of the Vale of Pickering (Yorkshire, Uk. Sedimentological and Stratigraphical Framework

    Directory of Open Access Journals (Sweden)

    Penn I. E.

    2006-11-01

    Full Text Available Les argiles du Kimméridgien contribuent à l'alimentation de nombreux gisements en mer du Nord. L'étude de quatre puits localisés sur une coupe Est-Ouest dans le Val de Pickering (Bassin de Cleveland permet d'illustrer dans cette formation l'hétérogénéité de distribution verticale et latérale de la matière organique en terme de quantité et de qualité. La coupe étudiée (35 km de long, 200 m de haut représente environ 6,5 millions d'années d'histoire géologique. Les analyses minéralogiques montrent que la formation est caractérisée par une grande homogénéité des apports sédimentaires, ce qui suppose des conditions de sédimentation stables dans le temps et dans l'espace. Le matériel sédimentaire, déposé dans un environnement calme, est composé de minéraux argileux (kaolinite, illite, et interstratifiés irréguliers illite/smectite avec des niveaux carbonatés résultant d'une production biogénique. Ces niveaux carbonatés intercalés au sein des argiles peuvent être corrélés entre les puits. Pour la plupart dolomitisés, ils résultent d'une transformation plus importante àl'ouest (Marton qu'à l'est (Reighton de couches presque exclusivement formées de coccolithes. L'extension horizontale de ces niveaux indique qu'ils correspondent à des événements géodynamiques régionaux. L'étude des ammonites permet de reconnaitre, dans le Yorkshire, la succession de 10 zones du Kimméridgien (sensu anglico et d'identifier 8 sous-zones depuis la zone à Cymodoce (- 144 m. a. jusqu'à celle à Pectinatus (- 137,5 m. a. . Les zonations reconnues permettent de corréler ces quatre puits avec les autres régions d'Angleterre. L'existence de repères stratigraphiques et de repères diagraphiques caractéristiques au sein des zones d'ammonites permet d'établir des zones de corrélation entre une partie bassin (puits de Marton 87, Ebberston 87, Flixton 87 et une zone haute appartenant à la plate-forme Est de l

  8. Catadoras de caranguejo e saberes tradicionais na conservação de manguezais da Amazônia brasileira Crab pickers and traditional knowledge in the conservation of brazilian Amazonian mangroves

    Directory of Open Access Journals (Sweden)

    Denise Machado

    2007-08-01

    Full Text Available A catação de caranguejo (Ucides cordatus desenvolvida por mulheres caboclas em áreas do litoral norte da região amazônica, precisamente no nordeste paraense, possibilita a análise da problemática ambiental e relações de gênero a partir de uma abordagem antropológica sobre uma parcela da população tradicional amazônica. Quanto à questão ambiental, é tratada em termos de conservação, manejo e conhecimento de recursos ambientais. Evidenciou-se que a pesca desenvolvida nas áreas de manguezais na vila de Guarajubal é feita artesanalmente e direcionada à captura e beneficiamento do caranguejo, com o trabalho decisivo das mulheres a partir da maior demanda nos centros urbanos próximos. O trabalho das catadoras lhes possibilita manifestarem-se em relação aos problemas ambientais, ainda que no contexto local.The crab (Ucides cordatus picking, done by cabocla women in Northeast Pará of the North Coastal Amazon Region, permits the analysis of the environmental question and of gender relations from an anthropological approach on a specific Amazonian traditional population. The environmental question is dealt with in terms of conservation, handling and knowledge about environmental resources. Evidence shows that crab picking is an artisan activity developed in mangrove swamp areas near the town of Guarajubal in which catching and doing product betterment of the crab are women's work, stimulated by the growing demand from nearby urban centers. The work of the catadoras (pickers allows them to manifest their opinions in relation to the environmental problems, albeit in the local context.

  9. Study of the use of a micro hydro in knockdown container completed with a cylindrical form housing of francis hydraulic turbine to support the development program of energy self-sustainability for remote and isolated areas in Indonesia

    Science.gov (United States)

    Kamal, Samsul; Prajitno; Pardadi, Janu

    2017-11-01

    With an intention to reduce the consumption of energy from fossil fuels and the CO2 emission in relation with the climate change solution, Indonesian Government has targeted that the role of the New and Renewable Energy (NRE) resources reaches at least 23% , or about 27 GW , in 2025 and it is expected to increase to the extent of about 134 GW in 2050 within the scenario of mixed energy supply. Geographically Indonesia has many remote and isolated areas with lack of appropriate infrastructure supports. But in the most of the areas, huge potential of new and renewable energy are available such as hydro energy is about 75 GW, biomass energy is about 32 GW and bio fuel is about 32 GW. The total utilization of the energy from small hydro energy up to this year for example is only about 300 MW. The significant obstacle in optimizing the utilization of small hydro energy in the areas is mainly on the infrastructure conditions and the local manufacture capabilities. Difficulties in mobilization of experts, skill worker , parts and constructions material result in very time consuming and costly for site construction. In this research a hydro turbine built in knock down container completed with a Francis turbine in cylindrical form housing is proposed and reported its performance on implementation. The hydro in a knock down container concept comes from the idea to manufacture hydro power solutions in a knock down container, readymade to be transported to installation sites. It can be easily manufactured in a quality controlled and cost effective environment, transported and installed in remote areas, to operate and maintain with minimal amount of equipment. It shows that the implementation of the unit in a remote area has reduced the total site construction time by 1/3 compared to the predicted one with conventional unit. The performance of the Francis turbine with cylindrical form housing has shown comparable with the conventional one which has volute form housing. The

  10. Anemia em catadores de material reciclável que utilizam carrinho de propulsão humana no município de Santos Anemia in recyclable waste pickers using human driven pushcarts in the city of Santos, southeastern Brazil

    Directory of Open Access Journals (Sweden)

    Mauro Abrahão Rozman

    2010-06-01

    Full Text Available OBJETIVO: Estimar a prevalência de anemia e analisar os fatores de risco a ela associados nos catadores de material reciclável que utilizam carrinho de propulsão humana do município de Santos - São Paulo. MÉTODO: Estudo transversal com 253 catadores foi realizado em julho de 2005. A coleta de informações foi feita por meio de questionário com informações sobre características individuais, ocupacionais e dietéticas. Foi realizada avaliação antropométrica e coletado sangue venoso para hemograma completo e sorologias de HIV, HCV, HBV e sífilis. A análise estatística foi feita por análise uni e multivariada (regressão logística, relacionando a anemia aos fatores de risco. RESULTADOS: A prevalência de anemia foi de 38,3%. As variáveis que mostraram associação independente com anemia no modelo multivariado foram: sexo (OR 4,11; IC95%: 1,56-10,87, infecção pelo HIV (OR 9,23; IC95%: 2,93-29,1, IMC (OR 0,21; IC95%: 0,07-0,64, anos de trabalho como catador (OR 4,54; IC95%: 1,29-16,0, consumo de leite (OR 0,36; IC95%: 0,16-0,81 e de proteína animal (OR 0,39; IC95%: 0,15-0,97. CONCLUSÃO: A prevalência de anemia entre catadores de material reciclável é elevada mesmo após a obrigatoriedade de adição de ferro nas farinhas de trigo e milho. Os catadores são excluídos das ações de proteção à saúde do trabalhador, previstas na legislação. Ações de saúde dirigidas a essa categoria profissional devem ser implementadas, garantindo a acessibilidade aos serviços de saúde.OBJECTIVE: To assess the prevalence of anemia and describe associated risk factors in recyclable waste pickers using human-driven pushcarts in the city of Santos. METHODS: A cross-sectional study including 253 recyclable waste pickers was conducted in the city of Santos, southeastern Brazil, in July 2005. A questionnaire was used to collect information about individual, occupational, and dietary factors. All subjects underwent an anthropometric

  11. Pickering dry storage - commissioning and initial operation

    International Nuclear Information System (INIS)

    Jonjev, S.

    1996-01-01

    Having commissioned all individual conventional and nuclear systems, the first Dry Storage Container (DSC) was loaded with four modules of 17 year cooled irradiated fuel (366 bundles) in the Auxiliary Irradiated Fuel Bay (AIFB) on November 29, 1995. After decontamination of the outer surface, and draining of water, the DSC was transported to the Used Fuel Dry Storage Facility (UFDSF) workshop, where it was vacuum dried, and then the lid was welded on. Following successful radiography test of the lid weld, the DSC was vacuum dried again and backfilled with Helium to a pressure of 930 mbar(a). The Helium leak test showed zero leakage (allowable leak rate is 1x10 -5 cc/sec). Finally, after loose contamination checks were performed and permanent safeguards seals were applied, the DSC was placed in the UFDSF storage area on January 23, 1996. Radiation fields at contact with the DSC surface were < 0.6 mrem/hr, and at the exterior surface of the storage building wall only 33 micro-rem/hr (far below the target of 250 micro-rem/hr). Therefore, the actual dose rates to general public (at the exclusion zone boundary) will be well below the design target of 1 % of the regulatory limit. (author). 3 refs., 2 tabs., 5 figs

  12. Pickering dry storage - commissioning and initial operation

    Energy Technology Data Exchange (ETDEWEB)

    Jonjev, S [Ontario Hydro, Pickering, ON (Canada). Pickering Generating Station

    1997-12-31

    Having commissioned all individual conventional and nuclear systems, the first Dry Storage Container (DSC) was loaded with four modules of 17 year cooled irradiated fuel (366 bundles) in the Auxiliary Irradiated Fuel Bay (AIFB) on November 29, 1995. After decontamination of the outer surface, and draining of water, the DSC was transported to the Used Fuel Dry Storage Facility (UFDSF) workshop, where it was vacuum dried, and then the lid was welded on. Following successful radiography test of the lid weld, the DSC was vacuum dried again and backfilled with Helium to a pressure of 930 mbar(a). The Helium leak test showed zero leakage (allowable leak rate is 1x10{sup -5} cc/sec). Finally, after loose contamination checks were performed and permanent safeguards seals were applied, the DSC was placed in the UFDSF storage area on January 23, 1996. Radiation fields at contact with the DSC surface were < 0.6 mrem/hr, and at the exterior surface of the storage building wall only 33 micro-rem/hr (far below the target of 250 micro-rem/hr). Therefore, the actual dose rates to general public (at the exclusion zone boundary) will be well below the design target of 1 % of the regulatory limit. (author). 3 refs., 2 tabs., 5 figs.

  13. Francis Bacon or Diego Velázquez in a dentist’s chair” – pictorial and other kinds of quotations as an addition to a disintegrating life

    Directory of Open Access Journals (Sweden)

    Arent van Nieukerken

    2014-01-01

    Full Text Available The mature poetry of Tadeusz Różewicz seems to be at odds with both modernist and postmodern literary tenets. It undeniably makes abundant use of intertextuality (including self-quotations, but in spite of this [post]modernist tendency it does resist self-referential impersonality. Różewicz again immerses allusions to images, texts and other artifacts – which, according to formalist and structuralist interpretations, should disengage themselves from an artist’s biography in order to achieve aesthetic autonomy – in the current of life, devoid of an innate sense and always identical to itself. In fact, life cannot be apprehended by art, and precisely, Różewicz tries to thematize this impossibility by producing texts or rather poetical acts that could be classified as self-effacing artifacts. He even succeeded in discrediting the modernist epiphany (which has a double status, i.e. as a poetical device and a window on the transcendent by replacing it with loquacious anticlimaxes. The fragmentary, disintegrating form of his later poetry (the long poem “Francis Bacon or Diego Velázquez in a dentist’s chair” is a perfect – or rather consciously imperfect – implementation of this form does not pretend to be a representation of a human being’s disintegrating existence. This poetry is, above all, an existential act, or – in other words – a performance, and not a self-sufficient work of art.

  14. As celebrações nas igrejas da ordem terceira de São Francisco: festas e cultura entre os seculares franciscanos no Império português, século XVIII (The celebrations in the churches of the Third Ord. of St. Francis - DOI: 10.5752/P.2175-5841.2011v9n21p306

    Directory of Open Access Journals (Sweden)

    Juliana de Mello Moraes

    2011-07-01

    Full Text Available Resumo As festas, durante o século XVIII, desempenhavam um importante papel no cotidiano das associações de leigos e religiosas. As ordens terceiras franciscanas organizavam distintas celebrações no intuito de promover a instituição no campo religioso local, difundir suas devoções e, ao mesmo tempo, ampliar o seu recrutamento. Este artigo analisa alguns elementos constituintes das celebrações realizadas pelas ordens terceiras de São Francisco em diferentes cidades do império português (Braga e São Paulo, visando compreender o significado e a valorização atribuídos às celebrações no interior das igrejas por essas agremiações. Para realizar esse estudo foram utilizados, principalmente, os livros contábeis das instituições com o objetivo de vislumbrar o investimento nas celebrações e as suas características particulares. A partir das informações compulsadas constata-se um dispêndio avultado com as cerimônias e com a manutenção do culto pelas ordens terceiras franciscanas, evidenciando a importância dedicada por essas associações às celebrações e às festas executadas em seus templos. Palavras-chave: ordem terceira de São Francisco; festa; império português.             Abstract The festivals, during the eighteenth century, played an important role in the daily religious and lay associations. The Third Orders of St. Francis organized distinct celebrations in order to promote the institution in the local religious field, spread their devotions, and at the same time broaden their recruitment. This article examines some elements of the celebrations held by the Third Orders of St. Francis in different cities of the Portuguese empire (Braga and São Paulo, aiming to understand the meaning and value attributed to the celebrations inside the churches by these associations. To perform this study were primarily used the accounting books of the institutions in order to glimpse the investment in the

  15. Dvorak. Concerto pour violoncelle / Francis Dresel

    Index Scriptorium Estoniae

    Dresel, Francis

    1992-01-01

    Uuest heliplaadist "Dvorak. Concerto pour violoncelle; Schumann: Concerto pour violoncelle. Orchestre Symphonique d'Estonie, Orchestre Symphonique de la Radio TV d'URSS, Neeme Järvi" Vogue "Archives Sovietiques" 651033 1978

  16. Francis Bacon On Understanding, Reason and Rhetoric

    Science.gov (United States)

    Wallace, Karl R.

    1971-01-01

    Bacon's views of the faculties of understanding and reason are presented and explained in reference to Baconian rhetoric. Understanding, Rhetoric, Insinuative and Imaginative Reason are defined. (Author/MS)

  17. Erwin Schroedinger, Francis Crick and epigenetic stability

    Directory of Open Access Journals (Sweden)

    Ogryzko Vasily V

    2008-04-01

    Full Text Available Abstract Schroedinger's book 'What is Life?' is widely credited for having played a crucial role in development of molecular and cellular biology. My essay revisits the issues raised by this book from the modern perspective of epigenetics and systems biology. I contrast two classes of potential mechanisms of epigenetic stability: 'epigenetic templating' and 'systems biology' approaches, and consider them from the point of view expressed by Schroedinger. I also discuss how quantum entanglement, a nonclassical feature of quantum mechanics, can help to address the 'problem of small numbers' that led Schroedinger to promote the idea of a molecular code-script for explaining the stability of biological order.

  18. Hydraulic design development of Xiluodu Francis turbine

    International Nuclear Information System (INIS)

    Wang, Y L; Li, G Y; Shi, Q H; Wang, Z N

    2012-01-01

    Hydraulic optimization design with CFD (Computational Fluid Dynamics) method, hydraulic optimization measures and model test results in the hydraulic development of Xiluodu hydropower station by DFEM (Dongfang Electric Machinery) of DEC (Dongfang Electric Corporation) of China were analyzed in this paper. The hydraulic development conditions of turbine, selection of design parameter, comparison of geometric parameters and optimization measure of turbine flow components were expatiated. And the measures of improving turbine hydraulic performance and the results of model turbine acceptance experiment were discussed in details.

  19. Dr. Francis Collins Is New NIH Director

    Science.gov (United States)

    ... Ph.D., a physician and geneticist, is the new Director of the National Institutes of Health (NIH), part of the U.S. Department of Health and Human Services. President Barack Obama nominated Dr. Collins, who served as Director of ...

  20. Iraan Suurbritannia vastu : kes paindus? / Francis Fukuyama

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2007-01-01

    Ilmunud ka: Postimees : na russkom jazõke 17. apr. lk. 7. Iraani sisepoliitikast seoses 15 Briti mereväejalaväelase arreteerimise ja vabastamisega, Iraani probleemist Islami Revolutsioonilise Kaardiväe (IRGC või Pasradan) ja sellega liidusuhetes olevate institutsioonidega nagu Basj sõjaväeline rühmitus. Autori arvates tahtsid mõned Iraani rühmitused teravdada vastasseisu Suurbritannia ja USA-ga

  1. Ajalugu ajaloo lõpus / Francis Fukuyama

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2007-01-01

    Ilmunud ka: Molodjozh Estonii 3. apr. lk. 13. Autor käsitleb USA presidendi George W. Bushi põhjendusi sissetungil Iraaki. Ta ütleb, et ammu enne liberaalset demokraatiat peab olemas olema funktsioneeriv riik. Demokraatlikke ümberkorraldusi peavad juhtima ühiskonnad, mis ise tahavad demokraatiat, välised jõud saavad kaasa aidata, aga sunduslik režiimimuutus pole kunagi olnud demokraatiasse siirdumise võti

  2. Erwin Schroedinger, Francis Crick and epigenetic stability.

    Science.gov (United States)

    Ogryzko, Vasily V

    2008-04-17

    Schroedinger's book 'What is Life?' is widely credited for having played a crucial role in development of molecular and cellular biology. My essay revisits the issues raised by this book from the modern perspective of epigenetics and systems biology. I contrast two classes of potential mechanisms of epigenetic stability: 'epigenetic templating' and 'systems biology' approaches, and consider them from the point of view expressed by Schroedinger. I also discuss how quantum entanglement, a nonclassical feature of quantum mechanics, can help to address the 'problem of small numbers' that led Schroedinger to promote the idea of a molecular code-script for explaining the stability of biological order.

  3. Kunstnik avaldas kaaluta olekus austust Francis Baconile

    Index Scriptorium Estoniae

    2008-01-01

    Projekti "teha kunsti ebapraktilistes kohtades" raames tegid Londoni kunstnikud Nasser Azam ja Lyn Hagan kunsti paraboloidsel spetsiaallennul kaaluta olekus. Hagan filmis kassi ja hiirt ning Azam lõpetas kuus õlimaali

  4. St Francis Nursing Home, Kilkerrin, Ballinasloe, Galway.

    LENUS (Irish Health Repository)

    Donnelly, Vidis

    2011-11-10

    Abstract Background There is some evidence that when mental health commitment hearings are held in accordance with therapeutic jurisprudence principles they are perceived as less coercive, and more just in their procedures leading to improved treatment adherence and fewer hospital readmissions. This suggests an effect of the hearing on therapeutic relationships. We compared working alliance and interpersonal trust in clinicians and forensic patients, whose continued detentions were reviewed by two different legal review bodies according to their legal category. Methods The hearings were rated as positive or negative by patients and treating psychiatrists using the MacArthur scales for perceived coercion, perceived procedural justice (legal and medical) and for the impact of the hearing. We rated Global assessment of Function (GAF), Positive and Negative Symptom Scale (PANSS), Working Alliance Inventory (WAI) and Interpersonal Trust in Physician (ITP) scales six months before the hearing and repeated the WAI and ITP two weeks before and two weeks after the hearing, for 75 of 83 patients in a forensic medium and high secure hospital. Results Psychiatrists agreed with patients regarding the rating of hearings. Patients rated civil hearings (MHTs) more negatively than hearings under insanity legislation (MHRBs). Those reviewed by MHTs had lower scores for WAI and ITP. However, post-hearing WAI and ITP scores were not different from baseline and pre-hearing scores. Using the receiver operating characteristic, baseline WAI and ITP scores predicted how patients would rate the hearings, as did baseline GAF and PANSS scores. Conclusions There was no evidence that positively perceived hearings improved WAI or ITP, but some evidence showed that negatively perceived hearings worsened them. Concentrating on functional recovery and symptom remission remains the best strategy for improved therapeutic relationships.

  5. LESLIE A. WHITE Y LA MEDICIÓN OBJETIVA DEL CAMBIO CULTURAL DE LA HUMANIDAD (Leslie A. White and the Objective Measurement of Human Culture Change

    Directory of Open Access Journals (Sweden)

    Pascual Izquierdo-Egea

    2018-12-01

    Full Text Available Esta breve comunicación arroja luz sobre una cuestión tan fundamental como la medición objetiva del cambio cultural de la humanidad a través del registro funerario. Aunque son numerosas las evidencias materiales que confirman la significatividad y fiabilidad de la técnica cuantitativa empleada para medir el avance o retroceso de las sociedades antiguas, aquí solo se muestran los datos de la serie temporal proveniente de la cuenca del río Balsas, México, representativa de la Mesoamérica prehispánica. ENGLISH: This brief communication sheds light on the fundamental question of the objective measurement of human culture change through the mortuary record. Although there are abundant material evidence that confirms the significance and reliability of the quantitative technique used to measure the advancement or retreat of ancient societies, only the time series data from the basin of the Balsas River, Mexico, representative of pre-Hispanic Mesoamerica, are shown here.

  6. Medical Surveillance Monthly Report (MSMR). Volume 22, Number 3, March 2015

    Science.gov (United States)

    2015-03-01

    2000–2014 Francis L. O’Donnell, MD, MPH; Stephen B. Taubman, PhD; Leslie L. Clark, PhD, MS P A G E 1 7 Update: heat injuries, active component, U.S...S, Sabatini C, Tagliaferri L, Principi N. Borrelia burgdorferi infection and Lyme disease in children. IJID. 2013;17(3):e153–e158. 20. Bacon RM, Ku...Refraction and Accommodation, Active Component Service Members, U.S. Armed Forces, 2000–2014 Francis L. O’Donnell, MD, MPH; Stephen B. Taubman, PhD

  7. Francis Fukuyama : demokraadid oleksid pidanud juba ammu võitma / Francis Fukuyama

    Index Scriptorium Estoniae

    Fukuyama, Francis

    2008-01-01

    Politoloog usub, et George W. Bushi valitsuse unilateraalsus oli lihtsalt tema valitsusaja fenomen, president Barack Obama valitsus pühenduks põhimõtteliselt multilateraalsusele. Autori hinnangul on Gruusia ja Ukraina NATO-liikmesuse tagant torkimine vastutustundetu, sest nende osas on 5. artikli kohustusi võimatu täita. NATO ainuke õige vastus Venemaa tegevusele Gruusias oleks kaasata Soome. Terrorismivastasest sõjast

  8. Developing digital vegetation for central hardwood forest types: A case study from Leslie County, KY

    Science.gov (United States)

    Bo Song; Wei-lun Tsai; Chiao-ying Chou; Thomas M. Williams; William Conner; Brian J. Williams

    2011-01-01

    Digital vegetation is the computerized representation, with either virtual images or animations, of vegetation types and conditions based on current measurements or ecological models. Digital vegetation can be useful in evaluating past, present, or future land use; changes in vegetation linked to climate change; or restoration efforts. Digital vegetation can be...

  9. Hamid Karzai on küll Afganistani riigipea, aga Massoud on kangelane / Leslie Leino

    Index Scriptorium Estoniae

    Leino, Leslie

    2005-01-01

    Afganistani valimistel võitsid opositsionäärid, tugevaim figuur nende hulgas on Ahmad Shah Massoudi kunagine kaasvõitleja Yunus Qanun, kelle siht on võõrväed riigist välja viia ja riik ühendada. Ameeriklased ja nende liitlased on ärevil, sest Qanun pole võõrvägede hulgas populaarne. Lisa: Põhimõtteliselt ameeriklaste vastu. Vt. samas: Afganistanis alustas pärast 30-aastast pausi tööd parlament

  10. Informe científico de Beca de Perfeccionamiento: Valdivia Torres, Lesly Spring (2013) 

    OpenAIRE

    Valdivia Torres, Lesly Spring

    2016-01-01

    La ingesta aguda de dieta alta en grasa activa la expresión de c-Fos en áreas cerebrales relacionadas al placer. El consumo de alimentos de alta palatabilidad es una experiencia gratificante para la mayoría de los animales, incluyendo los seres humanos. Varios estudios sugieren que el contexto actual en el que vivimos, donde dichos alimentos son de fácil acceso, promueve el consumo excesivo de calorías que pueden conducir a la obesidad o trastornos de la ali...

  11. Order picker routing with product returns and interaction delays

    NARCIS (Netherlands)

    Schrotenboer, Albert H.; Wruck, Susanne; Roodbergen, Kees Jan; Veenstra, Marjolein; Dijkstra, Arjan

    2017-01-01

    E-commerce companies often use manual order-picking systems in their warehouses since these systems can provide the required flexibility and scalability. Manual systems have been widely studied, but the operating policies may require significant changes for e-commerce settings. First, to maintain

  12. A comparison of clinical vs subclinical skin pickers in Israel

    DEFF Research Database (Denmark)

    Keuthen, Nancy J.; Curley, Erin E.; Tung, Esther S.

    2016-01-01

    BACKGROUND: Skin-picking disorder (SPD) was recognized as its own entity for the first time in DSM-5. The existing SPD literature is limited and, to date, no study has examined the differences between clinical and sub- clinical SPD. Identifying differences between these 2 groups may improve diagn...

  13. A low-cost real color picker based on Arduino.

    Science.gov (United States)

    Agudo, Juan Enrique; Pardo, Pedro J; Sánchez, Héctor; Pérez, Ángel Luis; Suero, María Isabel

    2014-07-07

    Color measurements have traditionally been linked to expensive and difficult to handle equipment. The set of mathematical transformations that are needed to transfer a color that we observe in any object that doesn't emit its own light (which is usually called a color-object) so that it can be displayed on a computer screen or printed on paper is not at all trivial. This usually requires a thorough knowledge of color spaces, colorimetric transformations and color management systems. The TCS3414CS color sensor (I2C Sensor Color Grove), a system for capturing, processing and color management that allows the colors of any non-self-luminous object using a low-cost hardware based on Arduino, is presented in this paper. Specific software has been developed in Matlab and a study of the linearity of chromatic channels and accuracy of color measurements for this device has been undertaken. All used scripts (Arduino and Matlab) are attached as supplementary material. The results show acceptable accuracy values that, although obviously do not reach the levels obtained with the other scientific instruments, for the price difference they present a good low cost option.

  14. From bijels to Pickering emulsions: A lattice Boltzmann study

    NARCIS (Netherlands)

    Jansen, F.; Harting, J.

    2011-01-01

    Particle stabilized emulsions are ubiquitous in the food and cosmetics industry, but our understanding of the influence of microscopic fluid-particle and particle-particle interactions on the macroscopic rheology is still limited. In this paper we present a simulation algorithm based on a

  15. The attached algal community near Pickering GS: (II)

    International Nuclear Information System (INIS)

    McKinley, S.R.

    1982-01-01

    Environmental parameters correlated with attached algal standing crop are investigated in this report. Three groups were recognized on the basis of standing crop levels and seasonal standing crop patterns. Factors which appeared to influence the separation among the three groups were substrate size and water temperature. Standing crop levels among the discharge transects, intake and areas outside the station were found to be correlated with a combination of parameters. Standing crop levels outside the station were inversely correlated with wind speed but positively correlated with substrate particle size and depth. Algal standing crop at the intake also was inversely correlated with wind speed. Differences in standing crop levels between the intake and areas outside the station may have been attributed to substrate particle size. Low standing crop level among the discharge transects may have been attributed to higher current velocities and periodically to high water temperature

  16. What Works: Real Research or a Cherry Picker's Paradise?

    Science.gov (United States)

    Dainton, Sheila

    2006-01-01

    The purpose of this article is to consider the evidence base for some of the proposals in the Education White Paper, Higher Standards: better schools for all. In particular, the article challenges the assertion by the Secretary of State for Education and Skills that the White Paper is based on knowledge of "what works." Using the issue…

  17. Women waste pickers: living conditions, work, and health.

    Science.gov (United States)

    Coelho, Alexa Pupiara Flores; Beck, Carmem Lúcia Colomé; Fernandes, Marcelo Nunes da Silva; Freitas, Natiellen Quatrin; Prestes, Francine Cassol; Tonel, Juliana Zancan

    2016-09-29

    To know the elements of work, health, and living conditions of women who pick recyclable waste and are members of a waste cooperative in a town of the state of Rio Grande do Sul, Brazil. This is a qualitative, exploratory and descriptive study with seven subjects. Data were collected through participative observation, semi structured interview, and a focus group from July to August of 2013. The data were subjected to content analysis. The following thematic categories emerged: Women's work, informality and precariousness; Experiences of job satisfaction; and Working conditions and health: experiences with accidents, illness and health services. It was concluded that the women who collect recyclable material are exposed to precarious work conditions and potential health risks, such as work overload, accidents, illness, and social insecurity, and that nurses are responsible for promoting actions that ensure the health and inclusion of these workers.

  18. Pickering emulsions stabilized by paraffin wax and Laponite clay particles.

    Science.gov (United States)

    Li, Caifu; Liu, Qian; Mei, Zhen; Wang, Jun; Xu, Jian; Sun, Dejun

    2009-08-01

    Emulsions containing wax in dispersed droplets stabilized by disc-like Laponite clay particles are prepared. Properties of the emulsions prepared at different temperatures are examined using stability, microscopy and droplet-size analysis. At low temperature, the wax crystals in the oil droplets can protrude through the interface, leading to droplet coalescence. But at higher temperatures, the droplet size decreases with wax concentration. Considering the viscosity of the oil phase and the interfacial tension, we conclude that the wax is liquid-like during the high temperature emulsification process, but during cooling wax crystals appear around the oil/water interface and stabilize the droplets. The oil/water ratio has minimal effect on the emulsions between ratios of 3:7 and 7:3. The Laponite is believed to stabilize the emulsions by increasing the viscosity of the continuous phase and also by adsorbing at the oil/water interface, thus providing a physical barrier to coalescence.

  19. Francis Bacon and the classification of natural history.

    Science.gov (United States)

    Anstey, Peter

    2012-01-01

    This paper analyses the place of natural history within Bacon's divisions of the sciences in The Advancement of Learning (1605) and the later De dignitate et augmentis scientiarum (1623). It is shown that at various points in Bacon's divisions, natural history converges or overlaps with natural philosophy, and that, for Bacon, natural history and natural philosophy are not discrete disciplines. Furthermore, it is argued that Bacon's distinction between operative and speculative natural philosophy and the place of natural history within this distinction, are discontinuous with the later distinction between experimental and speculative philosophy that emerged in the methodology of the Fellows of the early Royal Society.

  20. Francis Bacon's natural history and civil history: a comparative survey.

    Science.gov (United States)

    Manzo, Silvia

    2012-01-01

    The aim of this paper is to offer a comparative survey of Bacon's theory and practice of natural history and of civil history, particularly centered on their relationship to natural philosophy and human philosophy. I will try to show that the obvious differences concerning their subject matter encompass a number of less obvious methodological and philosophical assumptions which reveal a significant practical and conceptual convergence of the two fields. Causes or axioms are prescribed as the theoretical end-products of natural history, whereas precepts are envisaged as the speculative outcomes derived from perfect civil history. In spite of this difference, causes and precepts are thought to enable effective action in order to change the state of nature and of man, respectively. For that reason a number of common patterns are to be found in Bacon's theory and practice of natural and civil history.