Sample records for leonard wood mo

  1. Utility Monitoring and Control System (UMCS) and Utility Metering Plan and Specifications for Fort Leonard Wood, MO (United States)


    MDMS website as part of the Army Metering Program ( AMP ). An alternate means to monitor these meters via LonWorks BCS would be to add a pulse output...impossible), but Huntsville efforts and intent to connect MDMS metering (not part of an ESPC) as part of the AMP to the existing Honeywell The Honeywell UMCS can support the AMP metering requirement and pass Fort Leonard Wood meter data to MDMS. The meter data obtained locally

  2. Leonard Wood, Operational Artist or Scheming Careerist? (United States)


    Enterprise, and Labour : (GP Putnam’s sons, 1899). Quoted in Lane, Armed Progressive: General Leonard Wood, 58. 79 Ibid., 58. 21 and accountable...enslave pacified Moros. “He [Wood] and other officers expressed satisfaction with the results of these devastating campaigns.”155 The criticism that...

  3. Energy Engineering Analysis Program Study, Fort Leonard Wood, Missouri. Volume 3, Appendices G and H

    National Research Council Canada - National Science Library


    ...) Energy Saving Opportunity Survey (ESOS) at Fort Leonard Wood, Missouri. This study was authorized under the contract DACA41-92-C-0098 with Corps of Engineers Kansas City District, Kansas City, Missouri...

  4. Limited Energy Study. Thermal Storage at Central Chilled Water Plant, Fort Leonard Wood, Missouri

    National Research Council Canada - National Science Library


    The Scope of Work (See Appendix A) called for the study of the economic feasibility of providing a cold thermal storage system at the central chiller plant serving the Fort Leonard Wood 600 Area in order to reduce electrical demand charges...

  5. Black Swan Event Assessment for Fort Leonard Wood, Missouri (United States)


    visioned in conventional risk- management activities. This sort of analysis is important for purposes of planning for disruptive events that seem only a...this event is one that should be already in Fort Leonard Wood’s Risk Management Plan. However, the plan should be checked to see if it con- siders... management should be developed in consultation with forest managers across the region. ERDC/CERL SR-16-1 28 7 Earthquake 7.1 Potential events

  6. Demonstration of Combined Food and Landscape Waste Composting at Fort Leonard Wood, MO: Fort Leonard Wood Installation Strategic Sustainable Plan (United States)


    unsalable items (bruised fruit) to expired or spoiled items, to food scraps from a variety of venues (home, restaurant, hospital, cafeteria , and specialized equipment to minimize problems associated the diversion and collection of food residuals at their source (home, cafeteria ...anticipated waste volume. Equipment requirements for windrow composting are mini- mal and should include a shredder/chipper/grinder, industrial screens

  7. Adaptation Strategies for Training Lands and Ranges at Fort Leonard Wood, MO (United States)


    4 3-1 Timothy, a C3 cool-season grass that tolerates hot, dry conditions, is useful for planting ...soils (Turner et al. 1994, Giusquiani et al. 1995), thereby supporting more desir- able plant communities that are tolerant of training disturbances...Applica- tion rates beyond 80 to 100 tons per acre should be split and should al- ways be planned based on a soil and compost nutrient and heavy metal

  8. Application of TREECS to Small Arms Firing Ranges at Fort Leonard Wood, MO (United States)


    precipitation, rainfall, runoff, infiltration, air temperature, annual number of days with rain, and evapotranspiration ). Thus, it is not necessary that...fragments. These two inputs are discussed further below. The sorption partitioning coefficient of soluble lead (Pb2+) to soil can also be highly variable...per day most metals do not decay Partitioning distribution coefficient for adsorption of lead to water column TSS 500,000 L/kg based on help file in

  9. The Soldier-Athlete Initiative: Program Evaluation of the Effectiveness of Athletic Trainers Compared to Musculoskeletal Action Teams in Initial Entry Training, Fort Leonard Wood, June 2010 - December 2011 (United States)


    P. Brukner. Risk factors for stress fractures. Sports Medicine. 28:91-122, 1999. 208. Sherwood , O.D. Relaxin’s physiological roles and other diverse...Church VA to evaluate the effectiveness of MATs and ATs using injury, attrition and fitness metrics. The project was reviewed by the AIPH Human in the Directorate of Human Resources, Trainee Student Processing Branch at Fort Leonard Wood. Attrition was defined as discharge from service

  10. 'Leonard pairs' in classical mechanics

    International Nuclear Information System (INIS)

    Zhedanov, Alexei; Korovnichenko, Alyona


    Leonard pairs (LP) are matrices with the property of mutual tri-diagonality. We introduce and study a classical analogue of LP. We show that corresponding classical 'Leonard' dynamical variables satisfy non-linear relations of the AW-type with respect to Poisson brackets. (author)

  11. Hydrologic Analysis of Fort Leonard Wood, Missouri (United States)


    urinals, and landscape irrigation controls. The prerinse spray valve specification is in the public review stage with release anticipated during... irrigation . To achieve a net zero water installation, efforts begin with conservation followed by efficiency in use and improved integrity of...could not counteract the withdrawals for irrigation (Rosenberg et al. 1999). Eventually, this source will no longer be viable if current pumping

  12. Diana Leonard and Materialist Feminism (United States)

    Jackson, Stevi


    This tribute to Diana Leonard focuses on her contribution to materialist feminism, both through bringing the work of key French theorists to the attention of an Anglophone audience and through her own sociological work on the family, marriage and childhood. In so doing it draws attention to the importance of her work as editor and…

  13. Wood

    DEFF Research Database (Denmark)

    Unterrainer, Walter


    come from? How is it harvested? How is it manufactured and treated ? How are the buildings detailed and protected against weather during construction to keep them dry and make them long-life ? In a period of climate change, forests are the last lungs of the planet to sequestrate CO2. Their global size......Wood – a sustainable building material ? For thousands of years and all over the planet, wood has been used as a building material and exciting architecture has been created in wood. The fantastic structural, physical and aesthetic properties of the material as well as the fact that wood...... is a renewable resource makes it predestinated for what is considered ´sustainable architecture´. But the reality is less linear and there are serious traps: In fact the lecture shows by examples that it is much easier to build very unsustainable buildings in wood than the other way round! Where does the wood...

  14. Wood (United States)

    David W. Green; Robert H. White; Antoni TenWolde; William Simpson; Joseph Murphy; Robert J. Ross; Roland Hernandez; Stan T. Lebow


    Wood is a naturally formed organic material consisting essentially of elongated tubular elements called cells arranged in a parallel manner for the most part. These cells vary in dimensions and wall thickness with position in the tree, age, conditions of growth, and kind of tree. The walls of the cells are formed principally of chain molecules of cellulose, polymerized...

  15. Fort Leonard Wood Culvert and Flagpole: Historic American Engineering Record (United States)


    design contained 20 barracks, four latrines, four mess halls, one canteen , one administration barracks, one recreation room, one theater, one...remain the same. The cantonment continues to grow as the Army Chemical and Military Police Schools were relocated to FLW in 1999-2000...Original Use: Army Engineer Training Center Present Use: US Army Engineer School (USAES), US Army Chemical School (USACS), US Army Military Police

  16. Fort Leonard Wood Cantonment Landscape Context, Inventory, and Management (United States)


    77 Figure 46. Judo demonstration on parade ground by 6th Armored Division, FLW...52 Land Management Plan, 1968, 22. ERDC/CERL SR-07-21 80 Figure 46. Judo demonstration on parade ground by 6th Armored Division, FLW, April

  17. Initial Integrated Strategic Sustainability Plan for Fort Leonard Wood (United States)


    78 Figure 23. SWOT analysis for Workforce: Management ...statements Analysis of information in the SWOT matrices yielded recurring themes. These themes validated strategic challenges for the organization...Workforce: Management . ERDC/CERL SR-12-7 79 Figure 24. SWOT analysis for Workforce: Information/Communication. Figure 25. SWOT analysis for Workforce

  18. Fort Leonard Wood Cantonment Landscape Context, Inventory, and Management

    National Research Council Canada - National Science Library

    Tooker, Megan W; Stone, Sunny; Smith, Adam


    .... The layout of the cantonment in response to the rolling hills and terrain of the Ozarks Highlands has quite an impact on the scenic views, the curvilinear roadways and the park-like open space on the parade ground...

  19. Black Swan Event Assessment for Fort Leonard Wood, Missouri (United States)


    yearly in that region but most of them are not felt by humans, ac- cording to the Missouri Department of Natural Resources. Three earth - quakes have...Pulaski ERDC/CERL SR-16-1 7 3 Extreme Temperatures 3.1 Potential events Extreme temperatures including the frequency , length, and intensity measured using the Richter scale, moment magnitude scale, or the Mercalli scale. Table 7 details the destruc- tion levels and frequency of an

  20. Fort Leonard Wood German POW Stonework: Maintenance and Repair (United States)


    ratio of 1 part lime putty to 3 parts sand by volume. Often other ingredients, such as crushed  marine  shells (another source of lime), brick dust, clay...abrasive blasting would destroy the original surface finish of most of these metals, and would increase the possibility of  corrosion . However, conservation...protect the surface from  corrosion , but they must be renewed every 3 to 5 years. A similarly delicate cleaning technique employing glass beads has been

  1. Architectural Survey of Pence Elementary School, Fort Leonard Wood, Missouri (United States)


    two primary tasks: (1) the initial literature re- view, and (2) the identification and location of primary research materials. Literature review...The research team used an existing architectural survey for a general un- derstanding of the history of FLW. Secondary literature determined the...of class- rooms with an applied Gothic , Greek Revival, or Victorian facade to create a cohesive building (Figure 5). ERDC/CERL TR-11-25 8

  2. Architectural Survey of Pershing Elementary School, Fort Leonard Wood, Missouri (United States)


    7 Post World War II schools...n.d.). ................... 16 Figure 16. Disney School plan (Tanner 2006, 16...17 Figure 17. Disney School open classroom (Tanner 2006, 17). .............................................................. 17 Figure

  3. Mark Leonard : EL ei peakski olema suurvõim / Mark Leonard ; interv. Erkki Bahovski

    Index Scriptorium Estoniae

    Leonard, Mark


    Intervjuu Euroopa Välissuhete Nõukogu tegevdirektoriga, kes vastab küsimustele, mis puudutavad USA ja Euroopa suhteid, Euroopa Liidu välispoliitikat, Venemaa ja Euroopa Liidu suhteid pärast Gruusia konflikti. Ta peab murettekitavaks, et Venemaa üritab takistada euroopalike väärtuste levitamist oma naaberriikides. Vt. samas: Mark Leonard. Ilmunud ka Sirp : Diplomaatia 14. nov. nr. 11 lk. 13-14

  4. Obituary: Leonard Searle (1930-2010) (United States)

    Preston, George


    Leonard Searle, Astronomer and Director Emeritus of Carnegie Observatories, died at his home on July 2, 2010, in Pasadena, CA, in the midst of a busy retirement that followed a long, distinguished scientific career. Searle was born on October 23, 1930, in the London suburb of Mitcham to parents of modest means. He received his Bachelor of Science degree from University of Saint Andrews in Scotland, and his PhD from Princeton University, where he met his future wife, Eleanor Millard. They were married in Princeton in 1952. Eleanor, his lifelong companion, was a distinguished medieval historian who joined the Division of the Humanities and Social Sciences at Caltech as professor in 1979. She died in 1999. Leonard joined the faculty at University of Toronto in 1953, resigning that position in 1960 to become a Senior Research Fellow at Caltech, where he worked with Jesse Greenstein and Wallace Sargent on the chemical compositions of stars. The Caltech appointment marked the beginning of a fruitful association with Sargent, with whom he published 25 papers. In 1963 Searle left Caltech to join the faculty of the Mount Stromlo Observatory in Australia. Then in 1968 he returned to Pasadena to join the staff of Carnegie Observatories, his final academic home. Several themes punctuate Searle's academic career. One of the most persistent was the abundance of helium in the very early universe, a quantity whose numerical value is of great importance for cosmology. He pursued this topic with Sargent, first in the study of old evolved "horizontal branch" stars. Later, convinced that such stars could not provide a satisfactory answer, he and Sargent turned to certain small galaxies which provided more reliable estimates of the important helium-to-hydrogen abundance ratio. In the pursuit of this answer they devised the "simple model" of chemical evolution, a formalism used by astronomers to this day. He worked with the Dutch astronomer Piet van der Kruit to construct successful

  5. Reaction to Leonard Besselink’s ACELG Blog

    NARCIS (Netherlands)

    Kuijper, P.J.


    Thanks to Leonard Besselink for giving a fast, sensible and innovative approach to get the Union out of the quagmire created by the Court’s Opinion 2/13. He proposes an amending Protocol to the TEU, which will basically amend Article 6(2) of that Treaty by announcing that this accession will happen

  6. Análise da madeira do Pinus oocarpa parte II: caracterização estrutural da lignina de madeira moída Chemical analysis of the Pinus oocarpa wood. Part II: characterization of the milled wood lignin

    Directory of Open Access Journals (Sweden)

    Sérgio Antônio Lemos de Morais


    Full Text Available Este estudo caracterizou a Lignina de Madeira Moída (LMM proveniente de Pinus oocarpa cultivado na região do Cerrado brasileiro. A LMM foi isolada e analisada por meio das espectrometrias no infravermelho com transformada de Fourier (IVTF, de ressonância magnética nuclear do próton e carbono-13 e por intermédio de métodos químicos de análise por via úmida. A LMM apresentou uma fórmula mínima igual a C9H9,2O2,6(OCH 30,8 e massas molares médias em massa (Mw e numérica (Mn de 3.969 e 1.133 Da, respectivamente. A LMM dessa madeira se enquadra dentro das ligninas típicas de coníferas.This work presents the characterization of the milled wood lignin (MWL of the Pinus oocarpa cultivated in the Brazilian cerrado. FTIR, carbon-13 and proton NMR spectroscopies as well as wet chemical methods were used. The established C9 unit formula for MWL was C9H9,2O2,6(OCH 30,8 and its relative molecular weights (Mw and (Mn were 3969 and 1133 Da, respectively. Pinus oocarpa MWL was typical of softwood lignins.

  7. Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy

    DEFF Research Database (Denmark)

    Strange, Michael Stewart


    Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy (Cambridge: Cambridge University Press), 254pp. Udgivelsesdato: 2009......Book Review: John M. Hobson and Leonard Seabrooke (2007) (eds) Everyday Politics of the World Economy (Cambridge: Cambridge University Press), 254pp. Udgivelsesdato: 2009...

  8. A Study to Determine the Feasibility of Establishing a Same-Day Surgery Program at General Leonard Wood Army Community Hospital, Fort Leonard Wood, Missouri (United States)


    ancient Egypt (Schneck 1S98, 2q8). Prior to the advent of M IZ,z general anesthesia and modern hospital construction, most m patients with financial means...PROCEDURE 1 7 378 ECTOPIC PREGNANCY 3 7 z 379 THREATENED ABORTION 1 6 rn 380 ABORTION W/O D&C 1 4 v 381 ABORTION WITH D&C ASPIRATION CURETTAGE, OR...MALIGNANCY AGE ា W/O CC 1 360 VAGINA, CERVIX & VULVA PROCEDURES 2 361 LAPAROSCOPY & INCISIONAL TUBAL INTERRUPTION 48 378 ECTOPIC PREGNANCY 4 379

  9. Governor-General Leonard Wood’s neoliberal agenda of privatizing public assets stymied, 1921-1927

    Directory of Open Access Journals (Sweden)

    Vicente Angel S. Ybiernas


    Full Text Available After a serious fiscal and financial crisis erupted in 1920 to 1921 (in the wake of the termination of World War I, the new American Governor General to the Philippines, U.S. Army Major General Leonard Wood, promised in his inaugural address to privatize the country’s government-owned and controlled corporations such as the Philippine National Bank and the Manila Railroad Company, among others. Wood’s neoliberal agenda in the Philippines was opposed by Filipino politicians in the executive and legislative departments from the start. This key policy disagreement climaxed in the resignation en masse of Governor Wood’s Filipino cabinet and the members of the executive-legislative Council of State in 1923. The particulars of the Cabinet Crisis of 1923 —the so-called Conley Affair— however, obscured from plain sight the true gravity of the broader conflict (i.e., Filipino opposition to Wood’s agenda.Moreover, the general perception that Governor Wood’s asset privatization program was successfully blocked by the Cabinet Crisis of 1923 is inaccurate. In truth, Wood was stymied by adverse international and national market conditions from 1921 to 1923. A further delay occurred from 1924 to 1926 when Governor Wood endeavored to get the Council of State and the Filipino Legislature’s Board of Control (an oversight committee on board his neoliberal agenda; he failed to get the support of the Filipino leaders in this regard. When Wood finally decided in 1926 to take unilateral steps, he was tied up by litigation (locally and in the United States arising from his actions until his death from an unsuccessful brain surgery in 1927.

  10. Robert Leonard, Von Neumann, Morgenstern and the Creation of Game Theory


    Giocoli, Nicola


    In this much-awaited volume, the historian of economic thought Robert Leonard presents the results of his two-decade-long research on the life and intellectual achievements of the two founders of modern game theory, the Hungarian mathematician John von Neumann and the Austrian economist Oskar Morgenstern. The end result was well worth the wait because Leonard has produced a fascinating book which should be recommended first and foremost to economists and game theoreticians, even more—or reaso...

  11. Fort Leonard Wood - Building 2101: Interior Character-Defining Features, Inventory and Assessment (United States)


    18 Figure 17. Non-original dropped ceiling in the shower room in the southeast shower room (originally an officers... shower in southeast room which was originally an officers’ toilet during WWII (ERDC-CERL, 2013...Non-original kitchen with cabinets, sink , and shelf in the northwest portion of the building (ERDC-CERL, 2013

  12. Fiscal Year 2013 Net Zero Energy-Water-Waste Portfolio for Fort Leonard Wood (United States)


    visits with an even mix of women to men using the facilities. Federal water use indices suggest every visitor to a recreational pool is likely to use...program/waterefficiency_useindices.html ‡ Adding 70% active duty male demographic and 10% active duty female demographic § Assuming women demographics...foods (e.g. leftover bread can become croutons, sour milk can become cottage cheese, etc.) • Ensure proper storage techniques to reduce spoilage

  13. Effects of Sleep on Training Effectiveness in Soldiers at Fort Leonard Wood, Missouri (United States)


    M16/ M4 series rifle and 40 rounds of ammunition and presented with 40 timed target exposures at ranges from 50 to 300 meters. Twenty targets are...Lagerquist, O., Ley, A. L., & Collins, D. F. (2009). Chronotype influences diurnal variations in the excitability of the human motor cortex and the ability

  14. Prioritizing Historical Archaeological Sites at Fort Leonard Wood, Pulaski County, Missouri (United States)


    A representative sampling of the material present on the surface was collected. This included two pieces of milk glass lid liners from glass...vermifuges, and expectorants (Fike 1987). The white milk glass, lid -liner fragments in Figure 17 are from Mason jar lids . Such lid liners milk glass canning jar lid liner embossed with ‘CAP’” lying on the surface (Kreisa et al. 1996). ERDC/CERL TR-12-6 50 Figure 19. PSAP map

  15. Fort Leonard Wood Lake of the Ozarks Recreation Area, NRHP Section 110 Inventory and Evaluation (United States)


    102 Figure 131. Newer playground area located near the swimming area, with newer bath house to the left of the photo (ERDC-CERL...Evaluation, must be significantly associated with an important historic context, and must retain sufficient integrity to convey its significance. 1.3...bath house is located to the north. ERDC/CERL TR-16-7 103 Figure 131. Newer playground area located near the swimming area, with newer bath house

  16. An Effective Outpatient Appointment System for General Leonard Wood Army Community Hospital (United States)


    Programming Schedules Hooten GMP 19 Purpose of the Study W. Edwards Deming , a noted industrialist and proponent of Total Quality Management (Walton... Willian . (1987, Suamer). Effects of problem based scheduling on patient waiting and staff utilization of time in a pediatric clinic. Journal of Aplied...satisfaction. The Journal of Family_ Practice. 24 (2), 200-202. Walton, Mary (1986). The Deming _alnaggeent method. New York. The Putnam Publishing Group. 94

  17. Effects of Sleep on Training Effectiveness in Soldiers at Fort Leonard Wood (United States)


    sitting and reading, watching TV , as a passenger in a car for an hour, etc. Ratings above 10 out of a possible 24 are cause for concern with respect... Obese 10 (18.9) 4 (9.8) Caffeine Consume caffeinated beverages, no. (%) 35 (66.0) 20 (48.8) 0.092C Caffeine use (mg·d-1), median (IQR) 164...The spike at 3 hours in both histograms was believed to be attributable to recruits performing night watch duties. The median total sleep

  18. A Brief History of Leonard Peltier vs. US: Is there Recourse for Justice? (United States)

    Payne, Diane


    Asserting the fact that Leonard Peltier is a contemporary element in a stream of Native American genocide, this article outlines the events and presents a picture of the abuses which precipitated a continuous 24 hour vigil at the U.S. Supreme Court. (Author/RTS)

  19. International recognition for ageing research: John Scott Award-2014 to Leonard Hayflick and Paul Moorhead

    DEFF Research Database (Denmark)

    Rattan, Suresh


    It is with great pleasure and pride that we share the news of the award of the 2014 “City of Philadelphia John Scott Award”, to Dr. Leonard Hayflick and Dr. Paul Moorhead, for their research on ageing. The press release announcing the award states that: “from the first awarded in 1822, the Award...

  20. More than a Mentor: Leonard Darwin's Contribution to the Assimilation of Mendelism into Eugenics and Darwinism. (United States)

    Serpente, Norberto


    This article discusses the contribution to evolutionary theory of Leonard Darwin (1850-1943), the eighth child of Charles Darwin. By analysing the correspondence Leonard Darwin maintained with Ronald Aylmer Fisher in conjunction with an assessment of his books and other written works between the 1910s and 1930s, this article argues for a more prominent role played by him than the previously recognised in the literature as an informal mentor of Fisher. The paper discusses Leonard's efforts to amalgamate Mendelism with both Eugenics and Darwinism in order for the first to base their policies on new scientific developments and to help the second in finding a target for natural selection. Without a formal qualification in biological sciences and as such mistrusted by some "formal" scientists, Leonard Darwin engaged with key themes of Darwinism such as mimicry, the role of mutations on speciation and the process of genetic variability, arriving at important conclusions concerning the usefulness of Mendelian genetics for his father's theory.

  1. Wood flour (United States)

    Craig M. Clemons; Daniel F. Caufield


    The term “wood flour” is somewhat ambiguous. Reineke states that the term wood flour “is applied somewhat loosely to wood reduced to finely divided particles approximating those of cereal flours in size, appearance, and texture”. Though its definition is imprecise, the term wood flour is in common use. Practically speaking, wood flour usually refers to wood particles...

  2. UCLA Astronomer Frederick Charles Leonard (1896-1960): From Childhood Prodigy to Mature Obsession (United States)

    Clarke, R. S.; Plotkin, H.


    The precocious 13-year-old Frederick Leonard burst onto the astronomical scene in 1909, when he audaciously attended the 10th anniversary meeting of the American Astronomical Society (AAS) at Yerkes Observatory. He was soon contributing frequent notes to ``Popular Astronomy" on double stars and a variety of other topics, and in 1911 founded the amateur Society for Practical Astronomy. Although he presided over its rapid growth, edited its ``Monthly Register," and dominated its administrrative structure with youthful mastery, the Society peaked early and faded into oblivion by 1917. Astronomers like F.R. Moulton and E.C. Pickering recognized his talents and provided encouragement, but he was denied membership to the AAS due to his youth. As well, his lack of rigor in observations, verbose editorializing, and hunger for the limelight gave his elders pause. After two degrees from Chicago, he moved in 1919 to the University of California, Berkeley, completing a solid Berkeley/Lick PhD in December, 1921, with a dissertation on the spectra of visual double stars. He moved within weeks to the Southern Branch of the University (later UCLA), where he introduced an undergraduate astronomy program which successfully attracted many first-rate students (Fred Whipple being perhaps the most illustrious). Although he continued various research projects at Mt. Wilson and later Lick, they were purely observational, with little interpretive analysis. Perhaps sensing that the science of astronomy was beginning to pass him by, Leonard's career path veered suddenly to meteoritics by 1930. He and meteorite collector-dealer Harvey H. Nininger founded the Society for Research on Meteorites in 1933 (later, the Meteoritical Society), and Leonard became its first president and edited its journal over the next 25 years. The Meteoritical Society provided the perfect vehicle for Leonard's adolescent preoccupation with scientific society administration and journal editing to blossom into an adult

  3. Wood Dust (United States)

    Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

  4. Wood preservation (United States)

    Rebecca E. Ibach


    When wood is exposed to various environmental conditions, many degradation reactions (biological, ultraviolet, mechanical, moisture, and chemical) can occur. To protect wood from biological degradation, chemical preservatives are applied by nonpressure or pressure treatment. Penetration and retention of a chemical depend upon the wood species and the amount of...

  5. International recognition for ageing research: John Scott Award-2014 to Leonard Hayflick and Paul Moorhead


    Rattan, Suresh


    It is with great pleasure and pride that we share the news of the award of the 2014 “City of Philadelphia John Scott Award”, to Dr. Leonard Hayflick and Dr. Paul Moorhead, for their research on ageing. The press release announcing the award states that: “from the first awarded in 1822, the Award is the oldest scientific award in the United States and, as a legacy to Benjamin Franklin, they are in the historic company of past winners who include Marie Curie, Thomas Edison, Jonas Salk, Irving L...

  6. Wood composites (United States)

    Lars Berglund; Roger M. Rowell


    A composite can be defined as two or more elements held together by a matrix. By this definition, what we call “solid wood” is a composite. Solid wood is a three-dimensional composite composed of cellulose, hemicelluloses and lignin (with smaller amounts of inorganics and extractives), held together by a lignin matrix. The advantages of developing wood composites are (...

  7. An Analysis of the Effectiveness of the Retail Pharmacy Utilization Intervention at General Leonard Wood Army Community Hospital (United States)


    utilization between the plans. This supports the findings in a 2001 study by Gaither, Kirking, Ascione , and Welage which indicated consumers Gaither, C. A., Kirking, D. M., Ascione , F. J., & Welage, L. S. Retail Pharmacy Intervention 35 (2001). Consumers’ views on

  8. Made It in the Timber: A Historic Overview of the Fort Leonard Wood Region, 1800-1940 (United States)


    Mill (six miles south of Truedale’s) all operating around 1826 (Arthur 1940. 2). Arthur also notes that a man named Pettit operated a mill on the Big...Piney around 1820, but Pettit could actually be Pattie (Arthur 1940: 2). On the Gasconade, Beck reports that by 1823 there were already six saw mills...Historical Review VII(3): 138-145. Wagner, Philip L. 1974 Cultural Landscapes and Regions: Aspects of Communication. In Man and Cultural Heritage

  9. Manufacturer’s Catalog Data of Automation and Surveillance Systems for Utility Plants at Fort Leonard Wood, Missouri, Volume 2 (United States)


    JH’iA «4.1 UP SINGLE SYSTEM LOG ISO BLU-ELtll-ELECTRIC BEMANO PBOFIU 01EN 110MHH C’S J538DOI JPK ". t s MW ObPW 4...55 Start-Stop Programs 55 1 .xpansion Capacity 27000 points with added channels and memory tNVIRONMHNTAL: +32 to I05F. 95’? RH maximum POWBR...JC/80 System remedies this deficiency since data transmitted over telephone lines is limited to exceptions" B^T "I V. J 13 iso * i it is

  10. Wood preservation (United States)

    Kevin Archer; Stan Lebow


    Wood preservation can be interpreted to mean protection from fire, chemical degradation, mechanical wear, weathering, as well as biological attack. In this chapter, the term preservation is applied more restrictively to protection from biological hazards.

  11. Wood handbook : wood as an engineering material (United States)

    Robert J. Ross; Forest Products Laboratory. USDA Forest Service.


    Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

  12. Coke formation during the hydrotreatment of bio-oil using NiMo and CoMo catalysts

    NARCIS (Netherlands)

    Kadarwati, Sri; Hu, Xun; Gunawan, Richard; Westerhof, Roel; Gholizadeh, Mortaza; Hasan, M. D.Mahmudul; Li, Chun-Zhu


    This study aims to investigate the coke formation during the hydrotreatment of bio-oil at low temperature. The catalytic hydrotreatment of bio-oil produced from the pyrolysis of mallee wood was carried out using pre-sulphided NiMo and CoMo catalysts at a temperature range of 150–300 °C. Our results

  13. Wood as an adherend (United States)

    Bryan H. River; Charles B. Vick; Robert H. Gillespie


    Wood is a porous, permeable, hygroscopic, orthotropic, biological composite material of extreme chemical diversity and physical intricacy. Table 1.1 provides an overview of the may variables, including wood variables, that bear on the bonding and performance of wood in wood joints and wood-based materials. Of particular note is the fact that wood properties vary...

  14. The first systematic experimentation in music therapy: the genius of James Leonard Corning. (United States)

    Davis, William B


    The development of music therapy in the United States prior to 1950 has a fascinating but not well known history. The present study illuminates the music therapy research of James Leonard Corning (1855-1923), a prominent neurologist practicing during the late nineteenth-century in New York City. The purpose of this study was to provide biographical information and description of a series of music therapy experiments conducted by Corning. His 1899 article appearing in the Medical Record: A Weekly Journal of Medicine and Surgery summarized a series of inventive experiments using music to affect emotional states in people with mild behavioral-emotional and sleep disorders. Information was analyzed using a set of primary and secondary sources from contemporaneous books, newspapers and journals. These sources provided biographical information and insight into his experimental methods. Recent sources provided a framework to help understand his conclusions from the viewpoint of late nineteenth-century physicians and for current practitioners of music therapy. Findings indicate that Corning's rationale for using music, visual figures and, occasional medication in the treatment of behavioral-emotional disorders was successful in influencing feelings and emotions in a positive way. He believed that during pre-sleep and sleep, cognitive processes became dormant, allowing the penetration of "musical vibrations" into the subconscious eliminating morbid thoughts that plagued his patients. Understanding Corning's contributions to music therapy will assist contemporary educators and therapists to better understand the impact of early contributions to music therapy by late nineteenth-century practitioners such as Corning.

  15. Significance of wood extractives for wood bonding. (United States)

    Roffael, Edmone


    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  16. Psyche=singularity: A comparison of Carl Jung's transpersonal psychology and Leonard Susskind's holographic string theory (United States)

    Desmond, Timothy

    In this dissertation I discern what Carl Jung calls the mandala image of the ultimate archetype of unity underlying and structuring cosmos and psyche by pointing out parallels between his transpersonal psychology and Stanford physicist Leonard Susskind's string theory. Despite his atheistic, materialistically reductionist interpretation of it, I demonstrate how Susskind's string theory of holographic information conservation at the event horizons of black holes, and the cosmic horizon of the universe, corroborates the following four topics about which Jung wrote: (1) his near-death experience of the cosmic horizon after a heart attack in 1944; ( 2) his equation relating psychic energy to mass, "Psyche=highest intensity in the smallest space" (1997, 162), which I translate into the equation, Psyche=Singularity; (3) his theory that the mandala, a circle or sphere with a central point, is the symbolic image of the ultimate archetype of unity through the union of opposites, which structures both cosmos and psyche, and which rises spontaneously from the collective unconscious to compensate a conscious mind torn by irreconcilable demands (1989, 334-335, 396-397); and (4) his theory of synchronicity. I argue that Susskind's inside-out black hole model of our Big Bang universe forms a geometrically perfect mandala: a central Singularity encompassed by a two-dimensional sphere which serves as a universal memory bank. Moreover, in precise fulfillment of Jung's theory, Susskind used that mandala to reconcile the notoriously incommensurable paradigms of general relativity and quantum mechanics, providing in the process a mathematically plausible explanation for Jung's near-death experience of his past, present, and future life simultaneously at the cosmic horizon. Finally, Susskind's theory also provides a plausible cosmological model to explain Jung's theory of synchronicity--meaningful coincidences may be tied together by strings at the cosmic horizon, from which they

  17. Finishes for Wood Decks (United States)

    Mark Knaebe


    Wood decks have become an important part of residential construction. Wood decks can add versatile living space to a home and, with minimal maintenance, provide decades of use. However, wood decks are exposed to high levels of stress from severe weather conditions that shrink and swell the wood. Without proper maintenance, wood decks can develop problems such as checks...

  18. Machine Learning Takes on Health Care: Leonard D'Avolio's Cyft Employs Big Data to Benefit Patients and Providers. (United States)

    Mertz, Leslie


    When Leonard D'Avolio (Figure 1) was working on his Ph.D. degree in biomedical informatics, he saw the power of machine learning in transforming multiple industries; health care, however, was not among them. "The reason that Amazon, Netflix, and Google have transformed their industries is because they have embedded learning throughout every aspect of what they do. If we could prove that is possible in health care too, I thought we would have the potential to have a huge impact," he says.

  19. Choosing Wood Burning Appliances (United States)

    Information to assist consumers in choosing a wood burning appliance, including types of appliances, the differences between certified and non-certified appliances, and alternative wood heating options.

  20. Anion-π Catalysis of Enolate Chemistry: Rigidified Leonard Turns as a General Motif to Run Reactions on Aromatic Surfaces. (United States)

    Cotelle, Yoann; Benz, Sebastian; Avestro, Alyssa-Jennifer; Ward, Thomas R; Sakai, Naomi; Matile, Stefan


    To integrate anion-π, cation-π, and ion pair-π interactions in catalysis, the fundamental challenge is to run reactions reliably on aromatic surfaces. Addressing a specific question concerning enolate addition to nitroolefins, this study elaborates on Leonard turns to tackle this problem in a general manner. Increasingly refined turns are constructed to position malonate half thioesters as close as possible on π-acidic surfaces. The resulting preorganization of reactive intermediates is shown to support the disfavored addition to enolate acceptors to an absolutely unexpected extent. This decisive impact on anion-π catalysis increases with the rigidity of the turns. The new, rigidified Leonard turns are most effective with weak anion-π interactions, whereas stronger interactions do not require such ideal substrate positioning to operate well. The stunning simplicity of the motif and its surprisingly strong relevance for function should render the introduced approach generally useful. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. XII Avatud Ühiskonna Foorumi arutlusring "Euroopa hiilgus ja viletsus - Euroopa Liit 50. Kuidas edasi?" / Toomas Hendrik Ilves, Mark Leonard, Ivan Krastev ; intervjueerinud Andres Kasekamp

    Index Scriptorium Estoniae

    Ilves, Toomas Hendrik, 1953-


    Pärnus diskuteerisid 10. oktoobril 2007 Euroopa tuleviku teemadel president Toomas Hendrik Ilves, Euroopa Välissuhete Nõukogu tegevjuht Mark Leonard ja Sofias paikneva Liberaalstrateegiate Keskuse juht Ivan Krastev. Vestluse moderaator oli Eesti Välispoliitika Instituudi direktor, Avatud Eesti Fondi nõukogu esimees Andres Kasekamp

  2. Wood Species Recognition System


    Bremananth R; Nithya B; Saipriya R


    The proposed system identifies the species of the wood using the textural features present in its barks. Each species of a wood has its own unique patterns in its bark, which enabled the proposed system to identify it accurately. Automatic wood recognition system has not yet been well established mainly due to lack of research in this area and the difficulty in obtaining the wood database. In our work, a wood recognition system has been designed based on pre-processing te...

  3. Teaching Zen’s Ten Oxherding Pictures through Leonard Cohen’s “Ballad of the Absent Mare”

    Directory of Open Access Journals (Sweden)

    Ronald Green


    Full Text Available This paper describes how to teach Zen’s famous Ten Oxherding Pictures through Leonard Cohen’s song “Ballad of the Absent Mare.” It also explains how instructors can contextualize these pictures within the history of Buddhist visual culture and thereby frame Cohen’s adoption of them as a cowboy ballad motif. The essay begins by describing the metaphor of the ox. It then reviews three theories about the origin of the pictures, contextualizing them within the history of Buddhist visual culture. Finally, it provides a PowerPoint presentation that connects each of the Ten Oxherding Pictures to verses of Cohen’s song and offers comments for instructors’ use in class.

  4. Cobalt Blues The Story of Leonard Grimmett, the Man Behind the First Cobalt-60 Unit in the United States

    CERN Document Server

    Almond, Peter R


    For the latter half of the 20th century, cobalt-60 units were the mainstay of radiation treatments for cancer. Cobalt Blues describes the development of the first cobalt-60 unit in the United States and the man behind it, Leonard Grimmett. Conceptually conceived before World War II, it only became possible because of the development of nuclear reactors during the war. Although Grimmett conceived of and published his ideas first, the Canadians built the first units because of the capability of their reactor to produce more suitable cobalt-60 sources. This book tells the story of how Grimmett and others came together at the time that the U S Atomic Energy Agency was pushing the use of radioactivity in medicine. Due to his sudden death, very little information about Grimmett was known until recently, when various documents have come to light, allowing the full story to be told.

  5. The combustion of refuse derived fuel on a ''Nordfab'' biomass combustor at Leonard Ironside Ltd

    Energy Technology Data Exchange (ETDEWEB)

    Fells, A.R.


    Warren Spring Laboratory has been assessing the performance of a Nordfab biofuel combustor fitted with a Danstoker boiler rated at 4.5MW (100% MCR), when firing Easiburn refuse derived fuel. The unit is situated at Leonard Ironside Ltd, a market gardening business near Lyminge Kent. A number of operational problems were encountered with the system, namely excessive fuel consumption and intermittent production of a persistent acrid plume. A trials history is given with details of monitoring methods used. The results of the test work show the reciprocating grate to be unsuitable for continuous firing of refuse derived fuel. The performance of the Nordfab combustor when burning refuse derived fuel is compared with two other units using similar fuel bed transport systems. These are the coking stoker and the Dantrim biofuel combustor. (author).

  6. Wood decay by Chlorociboria aeruginascens (Nyl.) Kanouse (Helotiales, Leotiaceae) and associated basidiomycete fungi (United States)

    Dana L. Richter; Jessie A. Glaeser


    Two isolates of Chlorociboria aeruginascens (Nyl.) Kanouse incubated axenically on aspen wood blocks resulted in 18% and 32% mass loss after 134 wks (2 yrs 8 mo). Aspen wood decayed by C. aeruginascens contained cavities in the S2 layer of the secondary cell wall, similar to Type I soft rot attack, as well as erosion troughs and...

  7. Effect of particle size, coupling agent and DDGS additions on Paulownia wood polypropylene composites (United States)

    The mechanical, flexural, thermal, and physical characteristics of wood plastic composites employing Paulownia wood (PP) flour derived from 36-mo-old trees blended with polypropylene (PP) were analyzed. Composites of 25% and 40% w/w of PW and 0-10% by weight of maleated polypropylene (MAPP) were pr...

  8. Wood's lamp examination (United States)

    ... this page: // Wood lamp examination To use the sharing features on this page, please enable JavaScript. A Wood lamp examination is a test that uses ultraviolet ( ...

  9. Wood's lamp illumination (image) (United States)

    A Wood's lamp emits ultraviolet light and can be a diagnostic aid in determining if someone has a fungal ... is an infection on the area where the Wood's lamp is illuminating, the area will fluoresce. Normally ...

  10. Wood-plastic combination

    International Nuclear Information System (INIS)

    Schaudy, R.


    A review on wood-plastic combinations is given including the production (wood and plastic component, radiation hardening, curing), the obtained properties, present applications and prospects for the future of these materials. (author)

  11. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele


    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  12. Non_standard Wood

    DEFF Research Database (Denmark)

    Tamke, Martin

    . Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

  13. Iron Stain on Wood (United States)

    Mark Knaebe


    Iron stain, an unsightly blue–black or gray discoloration, can occur on nearly all woods. Oak, redwood, cypress, and cedar are particularly prone to iron stain because these woods contain large amounts of tannin-like extractives. The discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products, such as nails, screws, and...

  14. Wood preservative testing (United States)

    Rebecca Ibach; Stan T. Lebow


    Most wood species used in commercial and residential construction have little natural biological durability and will suffer from biodeterioration when exposed to moisture. Historically, this problem has been overcome by treating wood for outdoor use with toxic wood preservatives. As societal acceptance of chemical use changes, there is continual pressure to develop and...

  15. Wood thermoplastic composites (United States)

    Daniel F. Caulfield; Craig Clemons; Roger M. Rowell


    The wood industry can expand into new sustainable markets with the formation of a new class of composites with the marriage of the wood industry and the plastics industry. The wood component, usually a flour or fiber, is combined with a thermoplastic to form an extrudable, injectable or thermoformable composite that can be used in many non-structural applications....

  16. Wood Formation in Trees (United States)

    Melanie Mauriat; Gregoire Le Provost; Phillippe Rozenberg; Sylvain Delzon; Nathalie Breda; Bruno Clair; Catherine Coutand; Jean-Christoph Domec; Thierry Fourcaud; Jacqueline Grima-Pettenati; Raul Herrera; Jean-Charles Leple; Nicolas Richet; Jean-Francois Trontin; Christophe Plomion


    Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required....

  17. Request for wood samples

    NARCIS (Netherlands)



    In recent years the wood collection at the Rijksherbarium was greatly expanded following a renewed interest in wood anatomy as an aid for solving classification problems. Staff members of the Rijksherbarium added to the collection by taking interesting wood samples with them from their expeditions

  18. Ground-penetrating radar investigation of St. Leonard's Crypt under the Wawel Cathedral (Cracow, Poland) - COST Action TU1208 (United States)

    Benedetto, Andrea; Pajewski, Lara; Dimitriadis, Klisthenis; Avlonitou, Pepi; Konstantakis, Yannis; Musiela, Małgorzata; Mitka, Bartosz; Lambot, Sébastien; Żakowska, Lidia


    The Wawel ensemble, including the Royal Castle, the Wawel Cathedral and other monuments, is perched on top of the Wawel hill immediately south of the Cracow Old Town, and is by far the most important collection of buildings in Poland. St. Leonard's Crypt is located under the Wawel Cathedral of St Stanislaus BM and St Wenceslaus M. It was built in the years 1090-1117 and was the western crypt of the pre-existing Romanesque Wawel Cathedral, so-called Hermanowska. Pope John Paul II said his first Mass on the altar of St. Leonard's Crypt on November 2, 1946, one day after his priestly ordination. The interior of the crypt is divided by eight columns into three naves with vaulted ceiling and ended with one apse. The tomb of Bishop Maurus, who died in 1118, is in the middle of the crypt under the floor; an inscription "+ MAVRVS EPC MCXVIII +" indicates the burial place and was made in 1938 after the completion of archaeological works which resulted in the discovery of this tomb. Moreover, the crypt hosts the tombs of six Polish kings and heroes: Michał Korybut Wiśniowiecki (King of the Polish-Lithuanian Commonwealth), Jan III Sobieski (King of the Polish-Lithuanian Commonwealth and Commander at the Battle of Vienna), Maria Kazimiera (Queen of the Polish-Lithuanian Commonwealth and consort to Jan III Sobieski), Józef Poniatowski (Prince of Poland and Marshal of France), Tadeusz Kościuszko (Polish general, revolutionary and a Brigadier General in the American Revolutionary War) and Władysław Sikorski (Prime Minister of the Polish Government in Exile and Commander-in-Chief of the Polish Armed Forces). The adjacent six crypts and corridors host the tombs of the other Polish kings, from Sigismund the Old to Augustus II the Strong, their families and several Polish heroes. In May 2015, the COST (European COoperation in Science and Technology) Action TU1208 "Civil engineering applications of Ground Penetrating Radar" organised and offered a Training School (TS) on the

  19. Wood Density and Mechanical Properties of Pinus kesiya Royle ex Gordon in Malawi

    Directory of Open Access Journals (Sweden)

    Edward Missanjo


    Full Text Available Successful development of an appropriate tree breeding strategy and wood utilization requires information on wood properties. This study was therefore conducted to assess wood density and mechanical properties of Pinus kesiya Royle ex Gordon grown in Malawi. Wood samples from six families of P. kesiya at the age of 30 years were used for the study. The estimated mean wood density, Modulus of Elasticity (MoE, Modulus of Rupture (MoR and moisture content were 0.593 ± 0.001 g/cm3, 13.46 ± 0.07 GPa, 113.67 ± 0.57 MPa and 12.08% ± 0.03%, respectively. There were statistically significant (p < 0.001 differences in wood density and mechanical properties along the radial direction and stem height. Wood density and mechanical properties increased from pith to bark and decreased from the butt upwards. There were no significant (p > 0.05 differences in wood density and mechanical properties among the families. This is an indication that any tree among the families can be selected for tree improvement programs if density is considered as a variable. Wood density had a strong positive significant linear relationship with both MoE (r = 0.790; p < 0.001 and MoR (r = 0.793; p < 0.001. This suggests that it has the potential to simultaneously improve the wood density and mechanical properties of this species. Therefore, controlling wood density for the tree improvement program of P. kesiya in Malawi would have a positive impact on mechanical properties.

  20. Economics of wood dust

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J.A.


    This article reviews the economic effects of wood dust. The most important use of wood today is a fuel, and wood chips and shavings are sources of feedstock for boilers. Other uses include wood chips in the manufacture of particleboard, wood dust as bedding in riding stables and race tracks, as mulch for florists, and as an absorbent in the meat packing industry. The installation of dust collection systems is strongly urged as the consequences of inadequate collection include rapid machine wear, poor environmental conditions for workers, general interference with work, and its combustibility makes it a constant fire hazard.

  1. Floodplains and wood (United States)

    Wohl, Ellen


    Interactions between floodplains and wood date to the Carboniferous, when stable, multithread channel deposits appear with the evolution of tree-like plants. Foundational geologic texts, such as Lyell's, 1830Principles of Geology, describe floodplain-wood interactions, yet modern technical literature describes floodplain-wood interactions in detail for only a very limited range of environments. This likely reflects more than a century of deforestation, flow regulation, and channel engineering, including instream wood removal, which has resulted in severe wood depletion in most of the world's river networks. Instream wood affects floodplain form and process by altering flow resistance, conveyance and channel-floodplain connectivity, and influencing lateral and vertical accretion of floodplains. Instream wood reflects floodplain form and process as the floodplain influences wood recruitment via bank erosion and overbank flow, and wood transport and storage via floodplain effects on stage-discharge relations and flow resistance. Examining turnover times for instream wood at the reach scale in the context of a wood budget, floodplain characteristics influence fluvial transport and dynamics (wood recruitment), valley geometry (wood transport and storage), and hydraulics and river biota (wood decay and breakage). Accumulations of wood that vary from in situ jams and beaver dams in small channels to transport jams and log rafts in very large rivers can create stable, multithread channels and floodplain wetlands. Floodplain-wood interactions are best understood for a subset of small to medium-sized rivers in the temperate zone. We know little about these interactions on very large rivers, or on rivers in the tropical or boreal regions. This review suggests that most, if not all, channels and floodplains within forested catchments in the temperate zone historically had much greater wood loads and consequently much more obvious and important influences from wood than do

  2. Wood frame systems for wood homes

    Directory of Open Access Journals (Sweden)

    Julio Cesar Molina


    Full Text Available The use of constructive systems that combine strength, speed, with competitive differential techniques and mainly, compromising with the environment, is becoming more popular in Brazil. The constructive system in wood frame for houses of up to five stories is very interesting, because it is a light system, structured in reforested treated wood which allows the combination of several materials, besides allowing speed in the construction and total control of the expenses already in the project phase for being industrialized. The structural behavior of the wood frame is superior to the structural masonry in strength, thermal and acoustic comfort. However, in Brazil, the wood frame is still little known and used, due to lack of technical knowledge about the system, prejudice associated the bad use of the wood as construction material, or still, in some cases, lack of normalization. The aim of this manuscript consists of presenting the main technical characteristics and advantages of the constructive system in wood frame homes, approaching the main stages of the constructive process through examples, showing the materials used in the construction, in addition the main international normative recommendations of the project. Thus, this manuscript also hopes to contribute to the popularization of the wood frame system in Brazil, since it is a competitive, fast and ecologically correct system. Moreover, nowadays, an enormous effort of the technical, commercial and industrial section has been accomplished for the development of this system in the country.

  3. Cryoprotectant Production in Freeze-Tolerant Wood Frogs Is Augmented by Multiple Freeze-Thaw Cycles. (United States)

    Larson, Don J; Barnes, Brian M


    Ice nucleation across the skin of wood frogs (Lithobates sylvaticus) rapidly induces endogenous production of glucose, a cryoprotectant necessary for freeze tolerance. In laboratory studies of freeze tolerance, wood frogs are cooled slowly, often at -0.05°C h(-1), to facilitate high cryoprotectant production and survival. Under natural conditions in Alaska, however, wood frogs accumulate maximal tissue glucose concentrations while cooling at much faster rates, -0.35° to -1.6°C h(-1), and in addition undergo multiple successive freeze-thaw cycles before remaining frozen for the winter. We examined whether simulating these ecologically relevant cooling rates and repeated freeze-thaw events in captive wood frogs results in the high glucose concentrations found in naturally frozen wood frogs. We found that over successive freezing and thawing events, glucose concentrations increased stepwise in all measured tissues. Short thawing periods did not result in a statistically significant decline of glucose concentrations. Wood frogs that experienced three freeze-thaw events had fresh weight glucose concentrations that approached values found in tissues of wood frogs frozen in natural conditions. Laboratory wood frogs survive frozen for 2 mo, while wood frogs frozen under natural conditions survive frozen for up to 7 mo at temperatures below -18°C. We hypothesize that repeated freeze-thaw cycles with rapid cooling and warming rates allow for greater survival in Alaskan wood frogs through enhanced cryoprotectant production.

  4. Wood production, wood technology, and biotechnological impacts.



    In the year 2001, Prof. Dr. Ursula Kües was appointed at the Faculty of Forest Sciences and Forest Ecology of the Georg-August-University Göttingen to the chair Molecular Wood Biotechnology endowed by the Deutsche Bundesstiftung Umwelt (DBU). Her group studies higher fungi in basic and applied research. Research foci are on mushroom development and on fungal enzymes degrading wood and their applications in wood biotechnology. This book has been edited to thank the DBU for all support given to...

  5. Assessment of Health Behaviors, Health Education Interests, and Injuries among Employees at the General Leonard Wood Army Community Hospital, October 2014 - December 2014 (United States)


    70 (18%) 6.2 Health and Health Behaviors Sixteen survey questions addressed respondents’ self -evaluation of their health . 6.2.1, weight management, nutrition, and stress management, which correlate with the predominant self -reported unhealthy behaviors. 7.2 Injuries... self -reported feelings of stress, no associations can be made between injury and specific stress-related behavioral health diagnoses (e.g., anxiety

  6. Urban Wood Waste Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, G.


    This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

  7. Chapter 9: Wood Energy (United States)

    Francisco X. Aguilar; Karen Abt; Branko Glavonjic; Eugene Lopatin; Warren  Mabee


    The availabilty of information on wood energy continues to improve, particularly for commoditized woodfuels.  Wood energy consumption and production vary in the UNECE region because demand is strngly affected by weather and the prices of competing energy sources.  There has been an increase in wood energy in the power-and-heat sector in the EU28 and North American...

  8. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob


    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners....

  9. Complex geometries in wood

    DEFF Research Database (Denmark)

    Tamke, Martin; Ramsgaard Thomsen, Mette; Riiber Nielsen, Jacob


    The versatility of wood constructions and traditional wood joints for the production of non standard elements was in focus of a design based research. Herein we established a seamless process from digital design to fabrication. A first research phase centered on the development of a robust parame...... parametric model and a generic design language a later explored the possibilities to construct complex shaped geometries with self registering joints on modern wood crafting machines. The research was carried out as collaboration with industrial partners....

  10. Wood pellet seminar

    International Nuclear Information System (INIS)

    Aarniala, M.; Puhakka, A.


    The objective of the wood pellet seminar, arranged by OPET Finland and North Karelia Polytechnic, was to deliver information on wood pellets, pellet burners and boilers, heating systems and building, as well as on the activities of wood energy advisors. The first day of the seminar consisted of presentations of equipment and products, and of advisory desks for builders. The second day of the seminar consisted of presentations held by wood pellet experts. Pellet markets, the economy and production, the development of the pellet markets and their problems (in Austria), the economy of heating of real estates by different fuel alternatives, the production, delivery and marketing of wood pellets, the utilization of wood pellet in different utilization sites, the use of wood pellets in detached houses, pellet burners and fireplaces, and conversion of communal real estate houses to use wood pellets were discussed in the presentations. The presentations held in the third day discussed the utilization of wood pellets in power plants, the regional promotion of the production and the use of pellets. The seminar consisted also of visits to pellet manufacturing plant and two pellet burning heating plants

  11. Moisture Transport in Wood

    DEFF Research Database (Denmark)

    Astrup, Thomas; Hansen, Kurt Kielsgaard; Hoffmeyer, Preben


    Modelling of moisture transport in wood is of great importance as most mechanical and physical properties of wood depend on moisture content. Moisture transport in porous materials is often described by Ficks second law, but several observations indicate that this does not apply very well to wood....... Recently at the Technical University of Denmark, Department of Civil Engineering, a new model for moisture transport in wood has been developed. The model divides the transport into two phases, namely water vapour in the cell lumens and bound water in the cell walls....

  12. The wood, renewable energy

    International Nuclear Information System (INIS)

    Acket, C.


    This document evaluates the french forest situation and its future. Indeed, the wood energy constitutes in France the first renewable energy after the hydraulic. It presents the today situation of the french forest providing statistical data, evaluation of the energy estimation, the carbon fixation, the resources, the perspectives wood energy for 2050, the biofuels and an economic analysis. (A.L.B.)

  13. Wood thermoplastic composites (United States)

    Daniel F. Caulfield; Craig Clemons; Rodney E. Jacobson; Roger M. Rowell


    The term “wood-plastic composites” refers to any number of composites that contain wood (of any form) and either thermoset or thermoplastic polymers. Thermosets or thermoset polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins, such as epoxies and phenolics, plastics with which the forest products industry is most familiar (...

  14. Wood supply and demand (United States)

    Peter J. Ince; David B. McKeever


    At times in history, there have been concerns that demand for wood (timber) would be greater than the ability to supply it, but that concern has recently dissipated. The wood supply and demand situation has changed because of market transitions, economic downturns, and continued forest growth. This article provides a concise overview of this change as it relates to the...

  15. Heat sterilization of wood (United States)

    Xiping Wang


    Two important questions should be considered in heat sterilizing solid wood materials: First, what temperature–time regime is required to kill a particular pest? Second, how much time is required to heat the center of any wood configuration to the kill temperature? The entomology research on the first question has facilitated the development of international standards...

  16. Multifactorial antimicrobial wood protectants (United States)

    Robert D. Coleman; Carol A. Clausen


    It is unlikely that a single antimicrobial compound, whether synthetic or natural, will provide the ‘magic bullet’ for eliminating multiple biological agents affecting wood products. Development of synergistic combinations of selected compounds, especially those derived from natural sources, is recognized as a promising approach to improved wood protection. Recent...

  17. Material model for wood

    NARCIS (Netherlands)

    Sandhaas, C.; Van de Kuilen, J.W.G.


    Wood is highly anisotropic and shows ductile behaviour in compression and brittle behaviour in tension and shear where both failure modes can occur simultaneously. A 3D material model for wood based on the concepts of continuum damage mechanics was developed. A material subroutine containing the

  18. Economy of wood supply

    International Nuclear Information System (INIS)

    Imponen, V.


    Research and development of wood fuels production was vigorous in the beginning of the 1980's. Techniques and working methods used in combined harvesting and transportation of energy and merchantable wood were developed in addition to separate energy wood delivery. After a ten year silent period the research on this field was started again. At present the underutilization of forest supplies and the environmental effects of energy production based on fossil fuels caused the rebeginning of the research. One alternative for reduction of the price of wood fuels at the utilization site is the integration of energy and merchantable wood deliveries together. Hence the harvesting and transportation devices can be operated effectively, and the organizational costs are decreased as well. The wood delivery costs consist of the stumpage price, the harvesting and transportation costs, and of general expenses. The stumpage price form the largest cost category (over 50 %) of the industrial merchantable wood delivery, and the harvesting and transportation costs in the case of thinningwood delivery. Forest transportation is the largest part of the delivery costs of logging residues. The general expenses, consisting of the management costs and the interest costs of the capital bound to the storages, form a remarkable cost category in delivery of low-rank wood for energy or conversion purposes. The costs caused by the harvesting of thinningwood, the logging residues, chipping and crushing, the lorry transportation are reviewed in this presentation

  19. High performance Mo adsorbent PZC

    Energy Technology Data Exchange (ETDEWEB)



    We have developed Mo adsorbents for natural Mo(n, {gamma}){sup 99}Mo-{sup 99m}Tc generator. Among them, we called the highest performance adsorbent PZC that could adsorb about 250 mg-Mo/g. In this report, we will show the structure, adsorption mechanism of Mo, and the other useful properties of PZC when you carry out the examination of Mo adsorption and elution of {sup 99m}Tc. (author)

  20. Wood adhesives : vital for producing most wood products (United States)

    Charles R. Frihart


    A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and...

  1. Mechanical performance of wood plastic composites containing decayed wood


    Ayrılmış, Nadir; Kaymakcı, Alperen; Güleç, Türker


    This study investigated the potential use of the decayed wood in the manufacture of wood plastic composite (WPC) panel. Scots pine (Pinus sylvestris) sound wood and decayed wood (brown-rot fungi) were used as wood material. Three levels of 30%, 40%, and 50% of sound wood and decayed wood, based on the composition by weight, were mixed with the polypropylene with 3% (based on weight) maleic anhydride grafted PP (MAPP) as a coupling agent. The compound pellets were prepared from twin screw co-r...

  2. Cord Wood Testing in a Non-Catalytic Wood Stove

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States)


    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  3. Chapter 6: Wood energy and competing wood product markers (United States)

    Kenneth E. Skog; Robert C. Abt; Karen Abt


    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  4. Wood wastes: Uses

    International Nuclear Information System (INIS)

    Cipro, A.


    The 1,500 industrial firms manufacturing furniture in the Italian Province of Treviso can generate up to 190,000 tonnes of wood wastes annually. In line with the energy conservation-environmental protection measures contained in Italian Law No. 475/88, this paper indicates convenient uses for these wood wastes - as a raw material for fibreboards or as a fuel to be used in the furniture manufacturing plants themselves and in kilns producing lime. Reference is made to the wood wastes gasification/power generation system being developed by ENEA (the Italian Agency for New Technology, Energy and the Environment)

  5. Fatigue Damage in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben


    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Fatigue failure is found to depend both on the total time under load and on the number of cycles.Recent accelerated fatigue research on wood is reviewed, and a discrepancy between...... to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation between stiffness reduction...

  6. MoS₂ decoration by Mo-atoms and the MoS₂-Mo-graphene heterostructure: a theoretical study. (United States)

    Kvashnin, D G; Sorokin, P B; Seifert, G; Chernozatonskii, L A


    Here we propose a completely new covalent heterostructure based on graphene and self-decorated MoS2 monolayers. Detailed investigation of the decoration process of the MoS2 surface by Mo adatoms was performed using first principles DFT methods. Comparison between valence-only and semicore pseudopotentials was performed to correctly describe the interaction between Mo adatoms and the MoS2 surface. It was found that self-decoration by Mo atoms is favorable from an energetic point of view. We studied in detail various decoration paths of Mo atoms on the MoS2 surface. The strong variation of electronic properties after the decoration of MoS2 was found. The impact of the presence of Mo adatoms on the electronic properties of the graphene/MoS2 heterostructure was shown.

  7. Non_standard Wood

    DEFF Research Database (Denmark)

    Tamke, Martin

    . Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......Non-Standard elements in architecture bear the promise of a better more specific performance (Oosterhuis 2003). A new understanding of design evolves, which is focusing on open ended approaches, able to negotiate between shifting requirements and to integrate knowledge on process and material......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

  8. MoEDAL expands

    CERN Multimedia

    Anaïs Schaeffer


    The MoEDAL collaboration deployed a test array of 18 plastic Nuclear Track Etch Detector (NTD) stacks – covering an area of 1 m2 – in the MoEDAL/VELO cavern at Point 8 of the LHC ring in November 2009. This small array was supplemented by a further 110 stacks this past January. The MoEDAL test array, which now covers an area of 8 m2, will reveal its secrets early in 2013. The full MoEDAL detector will be installed in the next long shutdown of the LHC in 2013.   View of the MoEDAL detectors installed at Point 8 of the LHC ring in January 2011. MoEDAL (Monopole and Exotics Detector At the LHC), the seventh LHC experiment, was approved by the CERN Research Board at the end of 2009. Its goal is to search for very specific exotics such as highly ionising massive stable (or pseudo-stable) particles with conventional electrical charge and magnetic monopoles. “The main LHC experiments are designed to detect conventionally charged particles, with conventional ionisation patte...

  9. Wood pellet research program

    International Nuclear Information System (INIS)

    Sohkansanj, S.; Bi, T.


    Wood pellets are composed of waste wood materials such as sawmill residue, municipal landfill waste and grain crops. Due to the high temperature combustion used to form the waste materials into the pellet, no additives or glues are necessary to bind them. The pellets are typically used for home heating; heat and power production; poultry bedding; and in biorefineries. This presentation provided an outline of the University of British Columbia wood pellet research and development program. Research at the university is being conducted to develop new types of pellets. Researchers at the program also analyze the physical and chemical properties of pellets in order to optimize pellet density and heating values. Wood pellet modelling and simulation studies are carried out, and various training and education programs are also offered. Research is currently being conducted to develop a reactor for off-gassing experiments. This presentation also provided details of a study investigating the economics of wood pellet production and transport. Pellet production costs and feedstock costs were compared. A summary of the costs and energy inputs of pellet production included details of product storage; transportation and transfer; handling; and transportation to energy plants. It was concluded that more than 35 per cent of the energy content of biomass is used up in the processing and transport of Canadian wood pellets to Europe. refs., tabs., figs

  10. Hvem var Leonard?

    DEFF Research Database (Denmark)

    Pedersen, Peder Kaj


    Bernhard Christensen er interessant i et musikalsk identitetsperspektiv, fordi han forener et virke som kirkemusiker med et virke som komponist af jazzpræget musik til revyer og film og som en banebrydende skikkelse inden for musikpædagogik på grundlag af „rytmisk musik“. Artiklen belyser, hvorda...

  11. Wood for the trees

    Directory of Open Access Journals (Sweden)

    Rob Garbutt


    Full Text Available Our paper focuses on the materiality, cultural history and cultural relations of selected artworks in the exhibition Wood for the trees (Lismore Regional Gallery, New South Wales, Australia, 10 June – 17 July 2011. The title of the exhibition, intentionally misreading the aphorism “Can’t see the wood for the trees”, by reading the wood for the resource rather than the collective wood[s], implies conservation, preservation, and the need for sustaining the originating resource. These ideas have particular resonance on the NSW far north coast, a region once rich in rainforest. While the Indigenous population had sustainable practices of forest and land management, the colonists deployed felling and harvesting in order to convert the value of the local, abundant rainforest trees into high-value timber. By the late twentieth century, however, a new wave of settlers launched a protest movements against the proposed logging of remnant rainforest at Terania Creek and elsewhere in the region. Wood for the trees, curated by Gallery Director Brett Adlington, plays on this dynamic relationship between wood, trees and people. We discuss the way selected artworks give expression to the themes or concepts of productive labour, nature and culture, conservation and sustainability, and memory. The artworks include Watjinbuy Marrawilil’s (1980 Carved ancestral figure ceremonial pole, Elizabeth Stops’ (2009/10 Explorations into colonisation, Hossein Valamanesh’s (2008 Memory stick, and AñA Wojak’s (2008 Unread book (in a forgotten language. Our art writing on the works, a practice informed by Bal (2002, Muecke (2008 and Papastergiadis (2004, becomes a conversation between the works and the themes or concepts. As a form of material excess of the most productive kind (Grosz, 2008, p. 7, art seeds a response to that which is in the air waiting to be said of the past, present and future.

  12. Wood fuel and the environment

    International Nuclear Information System (INIS)

    Foster, C.A.


    The purpose of this paper is to try and demonstrate the role that the use of Wood as a Fuel can play in our environment. The term ''Wood Fuel'', for the purposes of these proceedings, refers to the use of wood obtained from the forest or the farm. It does not refer to waste wood from for example buildings. The role of wood fuel in the environment can be assessed at many different levels. In this paper three different scales of ''Environment'' and the role of wood fuel in each, will be considered. These three scales are namely the global environment, the local environment, and the National (community) environment. (Author)

  13. Energy from wood - an overview

    International Nuclear Information System (INIS)

    Nussbaumer, T.


    The present publication is the introduction to a series of papers on fundamentals and applications of wood energy. It summarizes figures and data of the actual situation of fuel wood utilization in Switzerland and its potential for the future. Further, the advantages of bio-energy are discussed and the possibilities of funding for bio-energy in Switzerland are described. Wood contributes with 2.5% to the total energy demand in Switzerland nowadays. However, the utilization of wood energy can be more than doubled, which is one of the targets of the Swiss energy policy. The supply chains for the different types of fuel wood are described and specifications and prices of log wood, forestry wood chips and wood residues are presented. The main applications of wood energy are residential heating with manually operated wood boilers and stoves, on the one hand, and heat production with automatic wood furnaces in industry and communities, on the other hand. Automatic furnaces have been promoted in the past ten years and hence they contribute nowadays with more than 50% to the energy supply from wood with a further growing share. As an assistance for further information, a list of institutions and addresses in the field of wood energy in Switzerland is given in the paper. (author)

  14. Turning wood residues into wood revenues

    International Nuclear Information System (INIS)

    Graham, R.G.; Kravetz, Don


    Ensyn is a profitable commercial company which derives its revenues from the conversion of wood residues into liquid biofuel and chemicals. The technology, Rapid Thermal Processing (RTP (TM) )is based on extremely fast ''cracking'' of biomass which results in light liquid yields exceeding 70% by weight, from wood. Whether producing chemicals or liquid biofuel, the RTP plant is configured identically and operated essentially in the same mode. Chemicals production simply allows economical production to occur at a lower plant capacity, as low as 2 tonnes/day, than is feasible for a dedicated fuel plant (typically greater than 100 tonnes/day). Ensyn has developed the commercialisation of RTP TM from bench to industrial scale in 10 years. A variety of crative funding initiatives in the early years allowed for capital to be raised for R and D without the loss of intellectual property (IP). The transition years of technology demonstration, prior to full commercialisation, were funded by a blend of revenues from venture capital and public sources, and by quickly tapping into a niche market for RTP TM . The utilisation of the technology at the niche market scale opened the doors to the larger fuel and commodity markets. Once, again, both IP and control of the company were maintained during these years. Flexibility, creativity and expertise are necessary to understand the significance of various financing options (private investments, commercial banking and bond issues) and to integrate these options with various renewable energy, recycling and tax incentives. Understanding these options with various renewable energy, recycling and tax incentives is necessary. Understanding both the core and peripheral needs of the customer are essential in successfully advancing a commercial wood energy venture. Ensyn's experience in these areas is the focus of the paper. (Author)

  15. Precision wood particle feedstocks (United States)

    Dooley, James H; Lanning, David N


    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  16. Wood-pastures of Europe

    DEFF Research Database (Denmark)

    Plieninger, Tobias; Hartel, Tibor; Martín-López, Berta


    Wood-pastures are archetypes of High Nature Value Farmlands in Europe and hold exceptional ecological, social, and cultural values. Yet, wood-pastures have been through a sharp decline all over Europe, mainly due to processes of agricultural intensification and abandonment. Recently, wood......-pastures have found increasing attention from conservation science and policy across Europe. In this paper we (i) perform the first pan-European assessment of wood-pastures, considering individual countries and biogeographic regions, (ii) present the ecological and social-cultural values of a wide diversity...... of wood-pasture systems in Europe, (iii) outline management challenges around wood-pastures, and (iv) provide insights for the policy agenda targeting wood-pastures in Europe. We estimate that wood-pastures cover an area of approximately 203,000km2 in the European Union (EU...

  17. Variation in root wood anatomy

    NARCIS (Netherlands)

    Cutler, D.F.


    Variability in the anatomy of root wood of selected specimens particularly Fraxinus excelsior L. and Acer pseudoplatanus L. in the Kew reference microscope slide collection is discussed in relation to generalised statements in the literature on root wood anatomy.

  18. Methane from wood

    International Nuclear Information System (INIS)

    Schulz, T. F.; Barreto, L.; Kypreos, S.; Stucki, S.


    The role of wood-based energy technologies in the Swiss energy system in the long-term is examined using the energy-system Swiss MARKAL model. The Swiss MARKAL model is a 'bottom-up' energy-systems optimization model that allows a detailed representation of energy technologies. The model has been developed as a joint effort between the Energy Economics Group (EEG) at Paul Scherrer Institute PSI) and the University of Geneva and is currently used at PSI-EEG. Using the Swiss MARKAL model, this study examines the conditions under which wood-based energy technologies could play a role in the Swiss energy system, the most attractive pathways for their use and the policy measures that could support them. Given the involvement of PSI in the ECOGAS project, especial emphasis is put on the production of bio-SNG from wood via gasification and methanation of syngas and on hydrothermal gasification of woody biomass. Of specific interest as weIl is the fraction of fuel used in passenger cars that could be produced by locally harvested wood. The report is organized as follows: Section 2 presents a brief description of the MARKAL model. Section 3 describes the results of the base case scenario, which represents a plausible, 'middle-of-the-road' development of the Swiss energy system. Section 4 discusses results illustrating the conditions under which the wood-based methanation technology could become competitive in the Swiss energy market, the role of oil and gas prices, subsidies to methanation technologies and the introduction of a competing technology, namely the wood-based Fischer-Tropsch synthesis. FinaIly, section 5 outlines some conclusions from this analysis. (author)

  19. Compressive Fatigue in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben


    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Small clear specimens of spruce are taken to failure in square wave formed fatigue loading at a stress excitation level corresponding to 80% of the short term strength. Four...... frequencies ranging from 0.01 Hz to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation...

  20. TCP HolyWood


    Oscar Núñez Mori


    We introduce a new end-to-end, sender side Transport Control Protocol called TCP HolyWood or in short TCP-HW. In a simulated wired environment, TCP HolyWood outperforms in average throughput, three of the more important TCP protocols ever made, we are talking about TCP Reno, TCP Westwood, and TCP Vegas; and in average jitter to TCP Reno and TCP Vegas too. In addition, according to Jain’s index, our proposal is as fair as TCP Reno, the Standard. Apresentamos um novo Protocolo de Controle de...

  1. The Asian Wood Pellet Markets (United States)

    Joseph A. Roos; Allen Brackley


    This study examines the three major wood pellet markets in Asia: China, Japan, and South Korea. In contrast to the United States, where most wood pellets are used for residential heating with pellet stoves, a majority of the wood pellets in Asia are used for co-firing at coal-fired power plants. Our analysis indicated that Japan is the largest importer of wood pellets...

  2. Classroom Demonstrations of Wood Properties. (United States)

    Foulger, A. N.

    Presented in this manual are 20 activities selected to show some of the properties of wood and how these properties relate to the cellular structure of wood. Each activity includes stated objectives, indicates materials needed, and explains procedures. Illustrations related to the activities, glossary of terms, and photographs of wood structure…

  3. Status of wood energy applications

    International Nuclear Information System (INIS)

    Zerbe, J.I.


    In this address, the potential of wood and wood residues to supply future energy needs is examined. In addition, the possible environmental impact of the use of wood fuels on global climate change is discussed. Technologies for the development of new fuels are described

  4. Wrong way: Heating with wood

    Energy Technology Data Exchange (ETDEWEB)


    Energy experts state that 'Heating with wood is a hobby, at the most'. Of course, one can save oil by heating with wood, but cost calculations shaw that it is a highly uneconomical substitute. On the other hand, wood can be recommended for thermal insulation.

  5. Strength loss in decayed wood (United States)

    Rebecca E. Ibach; Patricia K. Lebow


    Wood is a durable engineering material when used in an appropriate manner, but it is susceptible to biological decay when a log, sawn product, or final product is not stored, handled, or designed properly. Even before the biological decay of wood becomes visually apparent, the decay can cause the wood to become structurally unsound. The progression of decay to that...

  6. Ovalbumin as a Wood Adhesive (United States)

    Charles R. Frihart; Holly Satori; Zhu Rongxian; Michael J. Birkeland


    Use of proteins to bond wood dominated industrial production until the middle of the 20th century (1). The ensuing creation of the plywood and glulam beam industries allowed for more efficient use of wood resources than is possible with solid wood products. Many protein sources have been used as adhesives, including plant (soybean) and animal (blood, fish scales,...

  7. Wood construction and magnetic characteristics of impregnated type magnetic wood

    International Nuclear Information System (INIS)

    Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio


    The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability

  8. Goal Planning and Pursuit: Mobile Application Development and Evaluation (United States)


    the effectiveness of these applications with Noncommissioned Officers enrolled in Advanced Leaders Courses at Fort Leonard Wood, MO. The media ...presented and discussed. 4 Application Specifications Based on discussions with academics and Noncommissioned Officer Educational System...could access, and additional coordination with the local information technology specialists to grant the required access. The wireless network at

  9. Sustainability Logistics Basing Science and Technology Objective. Demonstration #1 - 1000 Person Camp Demo (United States)


    coordination, logistics, integration with other systems and technologies, stakeholder engagements, data collection and authentication were done collectively...the Contingency Basing Integration and Technology Evaluation Center (CBITEC), Fort Leonard Wood, MO. This report does not include analysis of the...Although not documented in this report , this objective was met during the activities of Stakeholder Day. The MSAT tools, current findings, and approach

  10. 78 FR 18806 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures... (United States)


    ..., Columbia Rgnl, ILS OR LOC/DME RWY 2, Amdt 15 Fort Leonard Wood, MO, Waynesville-St. Robert Rgnl Forney Fld... RWY 32, Amdt 6 Poplar, MT, Poplar Muni, RNAV (GPS) RWY 9, Orig Poplar, MT, Poplar Muni, RNAV (GPS) RWY...

  11. 75 FR 49481 - Procurement List; Additions and Deletion (United States)


    ..., Augusta, GA. Service Type/Location: Custodial Service, Fort Leonard Wood, MO. NPA: Challenge Unlimited..., PA. Service Type/Location: Custodial Service, U.S. Department of Energy, Forrestal Complex, 1000... Energy, Headquarters Procurement Services, Washington, DC. Service Type/Location: Custodial Service...

  12. Study of wood polymer combinations from woods of Kashmir

    International Nuclear Information System (INIS)

    Garg, V.P.; Hari Mohan; Rao, K.N.


    This report describes the studies conducted to upgrade inferior woods of Kashmir by the application of radiation polymerization process. The process has brought about improvements in the physical and mechanical properties of wood. Wood polymer composite samples have been studied for their use in flooring, wall panelling, roofing shingles, wood carving and in other decorative items. It has been shown that 10% ethyl silicate, when present along with methyl methacrylate or styrene, considerably improves the impact strength and such wood polymer composite samples do not crack even on nailing. Wood polymer composites have been tested for carving and it has been shown that with 50% polymer content, carving quality is preserved. It has also been shown that surface coated wood is more advantageous for use in roofing shingles. (author)

  13. History of wood machining (United States)

    Peter Koch


    The history of wood machining is closely tied to advanced in metallurgy and power sources. It has been strongly and continuously shaped by prevailing economic forces and the rise and decline of other contemporary industries. This paper sketches a few of the highlights, with emphasis on developments in North America.

  14. Grant Wood: "American Gothic." (United States)

    Fitzgerald, Diane M.


    Presents a lesson plan which exposes students in grades 10-12 to the visual symbols and historical references contained in Grant Wood's "American Gothic." Includes background information on the artist and the painting, instructional strategies, a studio activity, and evaluation criteria. (GEA)

  15. Wood waste in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Matos, O.; Ribeiro, R. [Biomass Centre for Energy - CBE, Miranda do Corvo (Portugal)


    The energy policy of the EC, as well as most of member states points to a sizeable increase of energy production based on renewable energy sources, wood, wood residues, agricultural residues, energy crops including SRF, organic sludges, solid residues, etc. Most recent goals indicate a desirable duplication of today`s percentage by 2010. The reasons for this interest, besides diversification of sources, less dependence on imported fuels, use of endogenous resources, expected decrease of fossil fuel reserves, use of available land, additional employment and income for rural communities, etc., are related to important environmental benefits namely in terms of emissions of hot house gases. Wood waste, resulting from forest operations, cleaning, cultural and final cuttings, and from wood based industries, constitute a special important resource by reason of quality and availability. In addition to this they do not require additional land use and the removal is beneficial. In the run-up to the becoming December`s 1997 `Climate Change Summit` in Kioto, there is mounting pressure on companies to plan on carbon cuts. (author) 6 refs., 1 tab.

  16. Chapter 3: Wood Decay (United States)

    Dan Cullen


    A significant portion of global carbon is sequestered in forest systems. Specialized fungi have evolved to efficiently deconstruct woody plant cell walls. These important decay processes generate litter, soil bound humic substances, or carbon dioxide and water. This chapter reviews the enzymology and molecular genetics of wood decay fungi, most of which are members of...

  17. Tannins in tropical woods

    Energy Technology Data Exchange (ETDEWEB)

    Doat, J.


    A preliminary study was made of the chemistry of pyrogallol- and catecholtannins, their general properties and methods of extraction and determination. Three methods of estimation - Lowenthal, powdered hide and spectrophotometry - were compared using two control solutions, four samples of wood and one of bark. Using the empirical powdered hide method, tannins of both types were estimated in wood and bark of various tropical species (some separately and some as a mixture), Moroccan oaks (Quercus suber and Q. ilex), and European oak 9Q. petraea). Further tests were made on the wood and bark of the two mangrove species, Rhizophora mangle and R. racemosa, by subjecting them to successive extraction with a range of solvents. None of the woods tested had as much as the 10% of tannins considered necessary in economic sources. The bark of the two mangroves, of Eucalyptus urophylla and of Prosopis africana had tannin contents over 10% and the latter two species had very favorable tannin/non-tannin ratios. All the tropical species, with the probable exception of E. urophylla, had only catecholtannins. Only the oaks and E. urophylla bark gave positive results when tested for gallotannins.

  18. RoMo

    DEFF Research Database (Denmark)

    Pedersen, Esben Warming; Hornbæk, Kasper


    In TUIs, physical/digital conflicts can occur when the digital model does not match the model implied by the spatial lay- out of tangibles. We show how tangible tabletop interfaces (TTI) can be modified to allow robot movement of tangi- bles, thereby avoiding conflicts. We present RoMo, an open...... source Java library that allow existing TTI applications to perform robot movement, and demonstrate its functionality with three applications....

  19. Radioactivity of Wood and Environment

    International Nuclear Information System (INIS)

    Hus, M.; Kosutic, K.; Lulic, S.


    Nuclear experiments in the atmosphere and nuclear accidents caused global deposition of artificial radionuclides in the soil of Earth's northern hemisphere, the territory of the Republic of Croatia included. Soil contamination by radionuclides resulted in their deposition in plants growing on the contaminated soil as well as in the trees. Large area of the Republic of Croatia is covered with wood, which is exploited in manufacture of industrial wood and for firewood. From approximately 3 million cubic metres of wood exploited annually, nearly one third serves for firewood. In the process of burning a smaller portion of radionuclides deposited in the wood evaporates and goes to atmosphere while a larger portion is retained in the ash. In this paper are presented the results of natural radionuclides 4 0K , 2 32T h and 2 38U as well as of artificial radionuclide 1 37C s content determination in the wood, wood briquette, charcoal and in ash remained after burning the wood, wood briquette and charcoal. The obtained results are discussed from wood radiocontamination aspect and from the aspect of potential environmental radiocontamination by the products from wood burning process. (author)

  20. Lignin-Retaining Transparent Wood. (United States)

    Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars


    Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  1. Lump wood combustion process (United States)

    Kubesa, Petr; Horák, Jiří; Branc, Michal; Krpec, Kamil; Hopan, František; Koloničný, Jan; Ochodek, Tadeáš; Drastichová, Vendula; Martiník, Lubomír; Malcho, Milan


    The article deals with the combustion process for lump wood in low-power fireplaces (units to dozens of kW). Such a combustion process is cyclical in its nature, and what combustion facility users are most interested in is the frequency, at which fuel needs to be stoked to the fireplace. The paper defines the basic terms such as burnout curve and burning rate curve, which are closely related to the stocking frequency. The fuel burning rate is directly dependent on the immediate thermal power of the fireplace. This is also related to the temperature achieved in the fireplace, magnitude of flue gas losses and the ability to generate conditions favouring the full burnout of the fuel's combustible component, which, at once ensures the minimum production of combustible pollutants. Another part of the paper describes experiments conducted in traditional fireplaces with a grate, at which well-dried lump wood was combusted.

  2. Mechanical properties of wood (United States)

    David W. Green; Jerrold E. Winandy; David E. Kretschmann


    The mechanical properties presented in this chapter were obtained from tests of small pieces of wood termed “clear” and “straight grained” because they did not contain characteristics such as knots, cross grain, checks, and splits. These test pieces did have anatomical characteristics such as growth rings that occurred in consistent patterns within each piece. Clear...

  3. Out of the woods. (United States)

    Jacobson, J L


    Throughout Africa, Asia and Latin America women are pushed out of forests and from their maintenance by governments and private interests for cash crop development disregarding the role of women in conserving forests. In developing countries forests are a source of wood for fuel; 60-80% of women gather wood for family needs in America. Fruits, vegetables, and nuts gathered in woods enhance their diet. Indonesian women pick bananas, mangos, guavas, and avocados from trees around their homes; in Senegal shea-nut butter is made from a local tree fruit to be sold for cash. Women provide labor also in logging, wood processing, and tree nurseries. They make charcoal and grow seedlings for sale. In India 40% of forest income and 75% of forest products export earnings are derived from nonwood resources. Poor, rural women make items out of bamboo, rattan, and rope to sell: 48% of women in an Egyptian province make a living through such activities. In India 600,000 women harvest tendu leaves for use as wrappings for cigarettes. The expansion of commercial tree plantations replacing once communal natural forests has forced poor households to spend up to 4-% of their income on fuel that they used to find in forests. Tribal women in India know the medicinal uses of 300 forest species, and women in Sierra Leone could name 31 products they obtained or made from trees and bushes, while men named only 8 items. Only 1 forestry project appraised by the World Bank during 1984-97 named women as beneficiaries, and only 1 out of 33 rural development programs funded by the World Bank did. Women provide food, fuel, and water for their families in subsistence economies, they know sustainable methods of forestry, yet they are not included in development programs whose success or failure could hinge on more attention to women's contribution and on more equity.

  4. Wood Fingerprints:Recognition of Sawn Wood Products


    Pahlberg, Tobias


    This thesis deals with wood fingerprints and presents ways to track sawn wood products through an industrial process using cameras. The possibility to identify individual wood products comes from the biological variation of the trees, where the genetic code, environment and breakdown process creates a unique appearance for every board. This application has much of the same challenges as are found in human biometrics applications.The vision for the future is to be able to utilize existing imag...

  5. Wood fuels utilization in Central Europe - the wood fuels consumption and the targets of utilization

    International Nuclear Information System (INIS)

    Alakangas, E.


    Following subjects are discussed in this presentation: The share of bioenergy of the total energy consumption in EU region; the wood fuels consumption in EU region in 1995; the division of bioenergy utilization (households, wood- based district heating, wood consumption in industry, power generation from wood and residues, biofuels, biogas and sludges); wood fuels consumption in households in EU countries in 1995; wood consumption in France; the additional wood fuel consumption potential in France; Blan bois - wood energy program; French wood energy markets; German wood energy markets; energy consumption in Germany; wood consumption in Bavaria; the wood fuels potential in Bavaria; wood fuels consumption in households in Bavaria; wood fuels consumption for district heating in Bavaria; fuel prices in Bavaria; Environmental regulations in Germany; small boiler markets in Germany; Energy consumption in Austria; small-scale utilization of wood fuels; utilization of wood energy. (Slides, additional information from the author)

  6. Radiographic testing of wood

    International Nuclear Information System (INIS)

    Osterloh, K.; Zscherpel, U.; Raedel, C.; Weidemann, G.; Meinel, D.; Goebbels, J.; Ewert, U.; Hasenstab, A.; Buecherl, T.


    Wood is an old and established consumption and construction material. It is still the most common material for constructing furniture, roofs, playgrounds and mine supports. In contrast to steel and concrete, wood warns of extreme loads by creaking. Its mechanical stability is more influenced by decay than by peripheral cracks. While external cracks are visible, internal decay by fungus growth is undetectable from outside. This may be a safety problem in supporting structures. The best analysis of the internal structure is provided by computed tomography, but this is also the most complex method, much more so than simple radiographic testing. However, the latter is made inaccurate by scattered radiation resulting from internal moisture. With the image processing options of digital radiographic techniques, the structural information can be separated effectively from noise. In contrast to X-ray and gamma radiography, neutron radiography provides information on the spatial distribution of moisture. In healthy wood, water is conducted in the sapwood while the hardwood is dry. Moisture in hardwood is caused by infestations, e.g. fungus growth. The contribution presents a comparative analysis of the available radiographic methods. (orig.)

  7. Diffusion barrier performances of thin Mo, Mo-N and Mo/Mo-N films between Cu and Si

    International Nuclear Information System (INIS)

    Song Shuangxi; Liu Yuzhang; Mao Dali; Ling Huiqin; Li Ming


    In this work, we have studied the diffusion barrier performances of Mo, Mo-N and Mo/Mo-N metallization layers deposited by sputtering Mo in Ar/N 2 atmospheres, respectively. Samples were subsequently annealed at different temperatures ranging from 400 to 800 deg C in vacuum condition. The film properties and their suitability as diffusion barriers and protective coatings in silicon devices were characterized using four-point probe measurement, X-ray diffractometry, scanning electron microscopy, Auger electron spectroscopy and transmission electron microscopy analyses. Experimental results revealed that the Mo (20 nm)/Mo-N (30 nm) layer was able to prevent the diffusion reaction between Cu and Si substrate after being annealed at 600 deg C for 30 min. The adhesion between layers and the content of N atoms are the key parameters to improve the properties of Mo-based barrier materials. The Mo layer interposed between Cu and Mo-N diluted the high nitrogen concentration of the barrier and so enhanced the barrier performances

  8. Wood ash to treat sewage sludge for agricultural use

    Energy Technology Data Exchange (ETDEWEB)

    White, R.K. [Clemson Univ., SC (United States)


    About 90% of the three million tons of wood ash generated in the United States from wood burning facilities is being landfilled. Many landfills are initiated tipping fees and/or restrictions on the disposal of special wastes such as ash. The purpose of this work was to evaluate (1) the feasibility of using wood ash to stabilize sewage sludge and (2) the fertilizer and liming value of the sludge/ash mixture on plant response and soil pH. Research showed that wood ash, when mixed with sludge, will produce a pH above 12.0, which meets US EPA criteria for pathogen reduction for land application on non-direct food chain crops. Different ratios of wood ash to sludge mixtures were tested and the 1:1 ratio (by weight) was found to be optimal. Five replications of wood ash from four sources were tested for moisture content, pH and fertilizer nutrients. The pH of the ash/sludge mixture (1:1) on day one ranged from 12.4 to 13.2. In most cases the pH remained the same over a 21 day test or only dropped 0.1 to 0.3 units. Analyses of the mixtures showed that heavy metal concentrations (As, B, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, S, Se, Zn) were low. The 1:1 ash/sludge mixture had a calcium carbonate equivalency of 17%. Green house pot studies using tall fescue grass were loadings of 300 to 750 pounds per acre of TKN-N than for 500 lb/acre of 10-10-10 commercial fertilizer. Plant tissue analysis showed N, P, K, Ca, and Mg levels to be within the sufficiency range for tall fescue.

  9. European wood-fuel trade

    International Nuclear Information System (INIS)

    Hillring, B.; Vinterbaeck, J.


    This paper discusses research carried out during the l990s on European wood fuel trade at the Department of Forest Management and Products, SLU, in Sweden. Utilisation of wood-fuels and other biofuels increased very rapidly in some regions during that period. Biofuels are replacing fossil fuels which is an effective way to reduce the future influence of green house gases on the climate. The results indicate a rapid increase in wood-fuel trade in Europe from low levels and with a limited number of countries involved. The chief products traded are wood pellets, wood chips and recycled wood. The main trading countries are, for export, Germany and the Baltic states and, for import, Sweden, Denmark and to some extent the Netherlands. In the future, the increased use of biofuel in European countries is expected to intensify activity in this trade. (orig.)

  10. Controlling mold on wood Pallets (United States)

    Carol A. Clausen


    THE WOOD PALLET AND CONTAINER INDUSTRY CONSUMES 4.5 billion board feet (BBF) of hardwoods and 1.8 BBF of softwoods for the annual production of 400-500 million solid wood pallets. While alternative materials such as plastic, corrugated paperboard and metal have entered the market, solid wood remains the material of choice for a majority of pallets on the market (more...

  11. Inoculation Expedition of Agar wood

    International Nuclear Information System (INIS)

    Peng, C.S.; Mohd Fajri Osman; Rusli Zakaria


    Inoculation expedition of agar wood is a main field works for researcher in Nuclear Malaysia to prove the real inoculation of agar wood in real jungle. These expeditions was conducted fourth times in the jungles of Malaysia including Gunung Tebu in Terengganu, Murum in Belaga, Sarawak, Kampung Timbang in Kota Belud, Sabah and Nuclear Malaysia itself. This expedition starts from preparation of samples and equipment, transportation into the jungle, searching and recognition of agar wood and lastly, inoculation of the agar wood. Safety aspects precedence set out in the preparation and implementation of this expedition. (author)

  12. Quantifying arthropod contributions to wood decay (United States)

    Michael Ulyshen; Terry Wagner


    Termites carry large amounts of soil into dead wood, and this behaviour complicates efforts to measure their contributions to wood decay. A novel method for isolating termite soil by burning the wood is described, and some preliminary results are presented.

  13. Corrosion of Fasteners in Wood Treated with Newer Wood Preservatives (United States)

    Samuel L. Zelinka


    This document compiles recent research findings related to corrosion of metals in preservative treated wood into a single report on corrosion of metals in wood. The research was conducted as part of the Research, Technology and Education portion of the National Historic Covered Bridge Preservation (NHCBP) Program administered by the Federal Highway Administration. The...

  14. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian


    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  15. Preservation of forest wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.


    As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

  16. Properties of seven Colombian woods (United States)

    B. A. Bendtsen; M. Chudnoff


    Woods from abroad are an important raw material to the forest products industries in the United States. A major concern in effective utilization of this resource is the lack of technical information on many species. This report presents the results of an evaluation of the mechanical properties of small, clear specimens of seven Colombian woods. These results are...

  17. Moisture transport in coated wood

    NARCIS (Netherlands)

    Meel, P.A. van; Erich, S.J.F.; Huinink, H.P.; Kopinga, K.; Jong, J. DE; Adan, O.C.G.


    Moisture accumulation inside wood causes favorable conditions for decay. Application of a coating alters the moisture sorption of wood and prevents accumulation of moisture. This paper presents the results of a nuclear magnetic resonance (NMR) study on the influence of a coating on the moisture

  18. The sustainable wood production initiative. (United States)

    Robert. Deal


    To address concerns about sustainable forestry in the region, the Focused Science Delivery Program is sponsoring a three year Sustainable Wood Production Initiative. The Pacific Northwest is one of the world's major timber producing regions, and the ability of this region to produce wood on a sustained yield basis is widely recognized. Concerns relating to the...

  19. Measuring wood specific gravity, correctly (United States)

    G. Bruce Williamson; Michael C. Wiemann


    The specific gravity (SG) of wood is a measure of the amount of structural material a tree species allocates to support and strength. In recent years, wood specific gravity, traditionally a forester’s variable, has become the domain of ecologists exploring the universality of plant functional traits and conservationists estimating global carbon stocks. While these...

  20. On Erdos–Wood's conjecture

    Indian Academy of Sciences (India)

    In this article, we prove that infinite number of integers satsify Erdős–Woods conjecture. Moreover, it follows that the number of natural numbers ≤ satisfies Erdős–Woods conjecture with = 2 is at least /(log ) for some positive constant > 2.

  1. Composites from wood and plastics (United States)

    Craig Clemons


    Composites made from thermoplastics and fillers or reinforcements derived from wood or other natural fibers are a dynamic research area encompassing a wide variety of composite materials. For example, as the use of biopolymers grows, wood and other natural fiber sources are being investigated as renewable sources of fillers and reinforcements to modify performance....

  2. The wood of Merovingian weaponry

    Czech Academy of Sciences Publication Activity Database

    Tegel, W.; Muigg, B.; Büntgen, Ulf


    Roč. 65, JAN (2016), s. 148-153 ISSN 0305-4403 R&D Projects: GA MŠk(CZ) EE2.3.20.0248 Institutional support: RVO:67179843 Keywords : Early Middle Ages * Merovingian weaponry * Mineralised wood * Wood anatomy Subject RIV: EH - Ecology, Behaviour Impact factor: 2.602, year: 2016

  3. Public opinion and wood energy (United States)

    Sarah Hitchner; John Schelhas; Teppo Hujala; J. Peter Brosius


    As wood-based bioenergy continues to develop around the world, it will utilize forestlands in new ways and will have different effects on a number of stakeholders, including forest landowners, local communities, extant industries, policymakers, investors, and others. As more stakeholders become involved in the wood energy web, and as the general public becomes more...

  4. Characterisation of wood combustion ashes

    DEFF Research Database (Denmark)

    Maresca, Alberto

    The combustion of wood chips and wood pellets for the production of renewable energy in Denmark increased from 5.7 PJ to 16 PJ during the period 2000-2015, and further increases are expected to occur within the coming years. In 2012, about 22,300 tonnes of wood ashes were generated in Denmark....... Currently, these ashes are mainly landfilled, despite Danish legislation allowing their application onto forest and agricultural soils for fertilising and/or liming purposes. During this PhD work, 16 wood ash samples generated at ten different Danish combustion plants were collected and characterised...... for their composition and leaching properties. Despite the relatively large variations in the contents of nutrients and trace metals, the overall levels were comparable to typical ranges reported in the literature for other wood combustion ashes, as well as with regards to leaching. In general, the composition...

  5. Origin of Petrified Wood Color

    Directory of Open Access Journals (Sweden)

    George Mustoe


    Full Text Available Fossil forests have world-wide distribution, commonly preserving mineralized wood that displays vivid hues and complex color patterns. However, the origin of petrified color has received little scientific attention. Color of silicified wood may be influenced by the presence of relict organic matter, but the most significant contribution comes from trace metals. This study reports quantitative analysis of trace metals in 35 silicified wood samples, determined using LA-ICP-MS spectrometry. The most important of these metals is Fe, which can produce a rainbow of hues depending on its abundance and oxidation state. Cr is the dominant colorant for bright green fossil wood from Arizona, USA and Zimbabwe, Africa. Complex color patterns result from the progressive nature of the fossilization process, which causes wood to have varying degrees of permeability during successive episodes of permineralization. These processes include simple diffusion, chromatographic separation, infiltration of groundwater along fractures and void spaces, and oxidation/reduction.

  6. Projected wood energy impact on US forest wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Skog, K.E. [USDA Forest Service, Madison, WI (United States)


    The USDA Forest Service has developed long-term projections of wood energy use as part of a 1993 assessment of demand for and supply of resources from forest and range lands in the United States. To assess the impact of wood energy demand on timber resources, a market equilibrium model based on linear programming was developed to project residential, industrial, commercial, and utility wood energy use from various wood energy sources: roundwood from various land sources, primary wood products mill residue, other wood residue, and black liquor. Baseline projections are driven by projected price of fossil fuels compared to price of wood fuels and the projected increase in total energy use in various end uses. Wood energy use is projected to increase from 2.67 quad in 1986 to 3.5 quad in 2030 and 3.7 quad in 2040. This is less than the DOE National Energy Strategy projection of 5.5 quad in 2030. Wood energy from forest sources (roundwood) is projected to increase from 3.1 billion (10{sup 9}) ft{sup 3} in 1986 to 4.4. billion ft{sup 3} in 2030 and 4.8 billion ft{sup 3} in 2040 (88, 124 and 136 million m{sup 3}, respectively). This rate of increase of roundwood use for fuel -- 0.8 percent per year -- is virtually the same as the projected increase rate for roundwood for pulpwood. Pulpwood roundwood is projected to increase from 4.2 billion ft{sup 3} in 1986 to 6.0 billion ft{sup 3} in 2030 and 6.4 billion ft{sup 3} in 2040 (119, 170 and 183 million m{sup 3}, respectively).

  7. Wood power in North Carolina

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, J.G.; Guessous, L. [Research Triangle Institute, Research Triangle Park, NC (United States)


    North Carolina (NC) is one of the most forested states, and supports a major wood products industry. The NC Department of Natural Resources sponsored a study by Research Triangle Institute to examine new, productive uses of the State`s wood resources, especially electric power generation by co-firing with coal. This paper summarizes our research of the main factors influencing wood power generation opportunities, i.e., (1) electricity demand; (2) initiative and experience of developers; (3) available fuel resources; (4) incentives for alternate fuels; and (5) power plant technology and economics. The results cover NC forests, short rotation woody crops, existing wood energy facilities, electrical power requirements, and environmental regulations/incentives. Quantitative assessments are based on the interests of government agencies, utilities, electric cooperatives, developers and independent power producers, forest products industries, and the general public. Several specific, new opportunities for wood-to-electricity in the State are identified and described. Comparisons are made with nationwide resources and wood energy operations. Preferred approaches in NC are co-generation in existing or modified boilers and in dedicated wood power plants in forest industry regions. Co-firing is mainly an option for supplementing unreliable primary fuel supplies to existing boilers.

  8. Cooling of wood briquettes

    Directory of Open Access Journals (Sweden)

    Adžić Miroljub M.


    Full Text Available This paper is concerned with the experimental research of surface temperature of wood briquettes during cooling phase along the cooling line. The cooling phase is an important part of the briquette production technology. It should be performed with care, otherwise the quality of briquettes could deteriorate and possible changes of combustion characteristics of briquettes could happen. The briquette surface temperature was measured with an IR camera and a surface temperature probe at 42 sections. It was found that the temperature of briquette surface dropped from 68 to 34°C after 7 minutes spent at the cooling line. The temperature at the center of briquette, during the 6 hour storage, decreased to 38°C.

  9. Wood would burn

    International Nuclear Information System (INIS)

    Swithenbank, Jim; Chen, Qun; Zhang, Xiaohui; Sharifi, Vida; Pourkashanian, Mohamed


    Absract: In view of the world-wide problem of energy sustainability and greenhouse gas production (carbon dioxide), it is timely to review the issues involved in generating heat and power from all fuels and especially new (to the UK) solid fuels, including high moisture fuels such as wood, SRF, oil shale, tar sands and brown coal, which will become major international fuels as oil and gas become depleted. The combustion properties of some of these materials are significantly different from traditional coal, oil and gas fuels, however the technology proposed herein is also applicable to these conventional fuels. This paper presents some innovative combustion system options and the associated technical factors that must be considered for their implementation. For clarity of understanding, the novel concepts will be largely presented in terms of a currently developing solid fuel market; biomass wood chips. One of the most important characteristics of many solid fuels to be used in the future (including oil shale and brown coal) is their high moisture content of up to 60%. This could be removed by utilising low grade waste heat that is widely available in industry to dry the fuel and thus reduce transport costs. Burning such dried wood for power generation also increases the energy available from combustion and thus acts as a thermal transformer by upgrading the low grade heat to heat available at combustion temperatures. The alternative approach presented here is to recover the latent heat by condensing the extrinsic moisture and the water formed during combustion. For atmospheric combustion, the temperature of the condensed combustion products is below the dew point at about 55-65 o C and is only suitable for recovery in an efficient district heating system. However, in order to generate power from the latent heat, the condensation temperature must be increased to the level where the heat can be used in the thermodynamic power cycle. This can be achieved by

  10. The Carbon Impacts of Wood Products (United States)

    Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog


    Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

  11. Treatments that enhance physical properties of wood (United States)

    Roger M. Rowell; Peggy Konkol


    This paper was prepared for anyone who wants to know more about enhancing wood’s physical properties, from the amateur wood carver to the president of a forest products company. The authors describe chemical and physical treatments of wood that enhance the strength, stiffness, water repellency, and stability of wood. Five types of treatments are described: 1. water-...

  12. Physical properties and moisture relations of wood (United States)

    William Simpson; Anton TenWolde


    The versatility of wood is demonstrated by a wide variety of products. This variety is a result of a spectrum of desirable physical characteristics or properties among the many species of wood. In many cases, more than one property of wood is important to the end product. For example, to select a wood species for a product, the value of appearance- type properties,...

  13. Moisture relations and physical properties of wood (United States)

    Samuel V. Glass; Samuel L. Zelinka


    Wood, like many natural materials, is hygroscopic; it takes on moisture from the surrounding environment. Moisture exchange between wood and air depends on the relative humidity and temperature of the air and the current amount of water in the wood. This moisture relationship has an important influence on wood properties and performance. Many of the challenges of using...

  14. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)



    Apr 19, 2011 ... selected dry wood by grinding. Interest in this modern industrial practice in wood anchors ... flour moulding technology minimizes atmospheric pollution, reduces cost of wood waste disposal and curbs, ... Zhang and Wolcott,. 2007). Wood Flour Moulding Technology: Implications for Technical Education ...

  15. Fire Safety Design of Wood Structures

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl


    Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections.......Lecture Notes on Fire Safety Design of Wood Structures including charring of wood and load bearing capacity of beams, columns, and connections....

  16. Wood-based composites and panel products (United States)

    John A. Youngquist


    Because wood properties vary among species, between trees of the same species, and between pieces from the same tree, solid wood cannot match reconstituted wood in the range of properties that can be controlled in processing. When processing variables are properly selected, the end result can sometimes surpass nature’s best effort. With solid wood, changes in...

  17. Wood Technology: Techniques, Processes, and Products (United States)

    Oatman, Olan


    Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…




  19. The challenge of bonding treated wood (United States)

    Charles R. Frihart


    Wood products are quite durable if exposure to moisture is minimized; however, most uses of wood involve considerable exposure to moisture. To preserve the wood, chemicals are used to minimize moisture pickup, to prevent insect attack, and/or to resist microbial growth. The chemicals used as preservatives can interfere with adhesive bonds to wood. Given the many...

  20. Combustion properties of wood impregnated with commercial ...

    African Journals Online (AJOL)

    ajl yemi


    Dec 19, 2011 ... ... thermal conductivity and the fact that wood char is formed when wood is burned. In order to reduce flammability and provide safety, wood is treated with fire-retardant chemicals. In other words, the combustibility of wood may be reduced with flame- retardant or fire-retardant materials (Nussbaum, 1988;.

  1. Potential wood protection strategies using physiological requirements of wood degrading fungi

    NARCIS (Netherlands)

    Sailer, M.F.; Etten, B.D. van


    Due to the increasing restrictions in the use of wood preserving biocides a number of potential biocide free wood preserving alternatives are currently assessed. Wood degrading fungi require certain conditions in the wood in order to be able to use wood as a food source. This paper discusses the


    Directory of Open Access Journals (Sweden)

    Yalçın ÖRS


    Full Text Available In this study, the combustion properties of some impregnation materials (abiotic and biotic factors used for eucalyptus wood in interior or exterior environments were investigated. The experimental samples were prepared from Eucalyptus wood based on ASTM-D-1413-76 Tanalith-CBC, boric acid, borax, vacsol-WR, immersol-WR, polyethylen glycole-400 and ammonium sulphate were used as an impregnation material. The results indicated that, vacuum treatment on Eucalyptus gave the lowest retention value of salts. Compounds containing boron+salt increased fire resistance however water repellents decreased the wood flammability.

  3. Women's work... in wood products (United States)

    Janice K. Wiedenbeck


    Women have opportunities galore in the 1990s in wood products research, education, extension, consulting,manufacturing, marketing, and associations in North America. In the 1980s the same statement could not have been made.

  4. Wood and Paper Manufacturing Sectors (United States)

    Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

  5. Wood-burning stoves worldwide

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo

    were suggested to facilitate the transition to cleaner wood-burning regimes. Considering that 40% of the world population continues relying on traditional forms of wood-burning, the design and dissemination of cleaner technologies of WBSs constitute relevant strategies to mitigate global climate...... of improved stoves. In the Brazilian case study, it was observed that the kitchen concentrations of PM2.5 monitored during wood cooking events increased by more than 10 times in relation to the background levels due to the improper use and maintenance of the studied ICSs (rocket stoves). In Southern Europe...... to facilitate the transition to more intelligent modes of using WBSs by: 1st training solid-fuel users to better operate and maintain existing installations, 2nd harmonizing wood-burning regulations to address the use of seasoned fuels, certified stoves and functioning chimneys; 3rd designing applications...

  6. Preparation of MoB and MoB-MoSi2 composites by combustion synthesis in SHS mode

    International Nuclear Information System (INIS)

    Yeh, C.L.; Hsu, W.S.


    Combustion synthesis in the mode of self-propagating high-temperature synthesis (SHS) was carried out in the Mo-B and Mo-B-Si systems for the preparation of molybdenum boride MoB and the composite of MoB-MoSi 2 from elemental powder compacts. Under a preheating temperature above 150 deg. C , the reaction of Mo with boron in the sample compact of Mo:B = 1:1 is characterized by a planar combustion front propagating in a self-sustaining and steady manner. As the preheating temperature or sample compaction density increased, combustion temperature was found to increase and the propagation rate of the combustion front was correspondingly enhanced. Moreover, the XRD analysis provides evidence of yielding nearly single-phase α-MoB from the Mo-B sample at equiatomic stoichiometry. In the synthesis of MoB-MoSi 2 composites, the starting stoichiometry of the Mo-B-Si powder compact was varied so as to produce the final composites containing 20-80 mol% MoB. It was also found the increase of flame-front velocity and combustion temperature with increasing MoB content formed in the composite. The composition analysis by XRD shows excellent conversion from the Mo-B-Si powder compact to the MoB-MoSi 2 composite through the SHS reaction; that is, in addition to a small amount of Mo 5 Si 3 , the as-synthesized composite is composed entirely of MoB and MoSi 2

  7. Robert Williams Wood: pioneer of invisible light. (United States)

    Sharma, Shruti; Sharma, Amit


    The Wood's lamp aids in the diagnosis of multiple infectious, inflammatory and neoplastic dermatologic conditions. Although the Wood's lamp has many applications, which have improved both the diagnosis and management of disease, the man credited for its invention is relatively unknown in medicine. Robert Williams Wood, a prominent physicist of the early 20th century, is credited for the invention of the Wood's lamp. Wood was the father of infrared and ultraviolet photography and made significant contributions to other areas in optics and spectroscopy. Wood's work encompassed the formative years of American Physics; he published over 200 original papers over his lifetime. A few years after the invention of the Wood's lamp for ultraviolet photography, physicians in Europe adopted the Wood's lamp for dermatologic applications. Wood's lamp remains popular in clinics globally, given its ease of use and ability to improve diagnostic precision. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  8. 99Mo Yield Using Large Sample Mass of MoO3 for Sustainable Production of 99Mo (United States)

    Tsukada, Kazuaki; Nagai, Yasuki; Hashimoto, Kazuyuki; Kawabata, Masako; Minato, Futoshi; Saeki, Hideya; Motoishi, Shoji; Itoh, Masatoshi


    A neutron source from the C(d,n) reaction has the unique capability of producing medical radioisotopes such as 99Mo with a minimum level of radioactive waste. Precise data on the neutron flux are crucial to determine the best conditions for obtaining the maximum yield of 99Mo. The measured yield of 99Mo produced by the 100Mo(n,2n)99Mo reaction from a large sample mass of MoO3 agrees well with the numerical result estimated with the latest neutron data, which are a factor of two larger than the other existing data. This result establishes an important finding for the domestic production of 99Mo: approximately 50% of the demand for 99Mo in Japan could be met using a 100 g 100MoO3 sample mass with a single accelerator of 40 MeV, 2 mA deuteron beams.

  9. Refraction and absorption of microwaves in wood

    International Nuclear Information System (INIS)

    Ziherl, Saša; Bajc, Jurij; Čepič, Mojca


    A demonstration experiment for physics students showing the dependence of the refractive index and absorption coefficient of wood on the direction of microwaves is presented. Wood and microwaves enable study of anisotropic properties, which are typically found in crystals. Wood is used as the persuasive representative of uniaxial anisotropic materials due to its visible structure and its consequent anisotropic properties. Wood can be cut in a general direction and wooden plates a few centimetres thick with well-defined fibre orientation are easily prepared. Microwaves are used because wood is transparent for microwaves and their centimetre-scale wavelength is comparable to the wood structure. (paper)

  10. wood burns down

    Directory of Open Access Journals (Sweden)

    Vladimir Bukh


    Full Text Available To relax the local authorities and to receive the guests of high rank «with no tie» the so-called «Fisherman's House» was built at the source of Angara-river, near Lake Baikal. Vladimir Ivanov, a young architect, was noticed by his skillful performa nee of exclusive orders and became the author of this house. At the time of ferroconcrete boom the proposal to build a wooden guest house turned out to be unexpectedly to the point and was graciously approved. The economic department was entrusted to select the men good for carpenter's work, and the forestry department was entrusted to provide thick round timber. And the work started. But, as it usually happens, the workers did not take the trouble and made the first eight rims of the current timber with an inappropriate diameter.And when Pavlov insisted on demolishing the construction and replacing the logs by the logs with the necessary diameter, the building work obeyed to his will and was finished suecessfully.The architecture of the house is not the derived action of the saw and the fret-saw. It is a technology of the axe. It is natural, convincing and original. It is no use to look for the local sources in it. It grew up in the area of timber and cold winter. And this clear and efficient action kept the construction from the annoying vulgarity and provided Siberian exotics easily penetrating into one's soul, refined as it may be.One of the eminent guests said with admiration: «Even if Pavlov had created nothing more, he would have justified his professional choice with this single house.» Why not to say it as a good toast. However, this is a suitable case to add: style is an absence of style. It is a taste.After the Fisherman's House Irkutsk architects were attracted by wood. They followed the strictness in wood and, as much as they could, created a couple of successful remakes, until the cylinder logs and ... new

  11. Thermopower of beech wood biocarbon (United States)

    Smirnov, I. A.; Smirnov, B. I.; Orlova, T. S.; Sulkovski, Cz.; Misiorek, H.; Jezowski, A.; Muha, J.


    This paper reports on measurements of the thermopower S of high-porosity samples of beech wood biocarbon with micron-sized sap pores aligned with the tree growth direction. The measurements have been performed in the temperature range 5-300 K. The samples have been fabricated by pyrolysis of beech wood in an argon flow at different carbonization temperatures ( T carb). The thermopower S has been measured both along and across the sap pores, thus offering a possibility of assessing its anisotropy. The curves S( T carb) have revealed a noticeable increase of S for T carb biocarbons, which suggests that for T carb ˜ 1000°C they undergo a phase transition of the insulator-(at T carb 1000°C) type. The existence of this transition is attested also by the character of the temperature dependences S( T) of beech wood biocarbon samples prepared at T carb above and below 1000°C.

  12. Assessment of the wood waste resource and its position in the wood / wood-energy sector - Synthesis

    International Nuclear Information System (INIS)

    Guinard, Ludovic; Deroubaix, Gerard; Roux, Marie-Lise; Levet, Anne-Laure; Quint, Vincent


    The first objective of this study is to obtain a better knowledge of the 'wood wastes' issue, to propose a photography of the wood waste sector (productions, trades, consumptions), and then to elaborate different prospective scenarios on the use of wood waste volumes while taking into account possible evolutions on the medium or short term of the regulation and market of the wood/wood energy sector. The considered wastes come from industrial production, from the use of wood-based products, and from the end of life of products potentially containing wood. The authors present bibliographical sources and the adopted methodology, briefly describe the 'wood waste' system with its actors, and then report their assessment of wood wastes. They propose a global assessment as well as detailed assessments with respect to waste origins: wood trade and distribution, industries, craft, households and communities, building sector, public and private tertiary sector, packaging. They also address the collection and management of wood wastes by public services, and present the different types of valorisation (panel fabrication, energy, and others). They discuss exports, and then present different scenarios: a trend-based scenario, and two prospective scenarios with a priority to energetic valorisation or to material valorisation of wood wastes. These scenarios are compared

  13. Dipole strength distribution below the giant dipole resonance in {sup 92}Mo, {sup 98}Mo and {sup 100}Mo

    Energy Technology Data Exchange (ETDEWEB)

    Rusev, G.Y.


    Investigations of the dipole-strength distributions in {sup 92}Mo, {sup 98}Mo and {sup 100}Mo were carried out by means of the method of nuclear resonance fluorescence. The low-lying excitations in the nuclides {sup 92}Mo, {sup 98}Mo and {sup 100}Mo have been studied in photon-scattering experiments at an electron energy of 6 MeV at the ELBE accelerator and at electron energies from 3.2 to 3.8 MeV at the Dynamitron accelerator. Five levels were observed in {sup 92}Mo. Five levels in {sup 98}Mo and 14 in {sup 100}Mo were identified for the first time in the energy range from 2 to 4 MeV. Dipole-strength distributions up to the neutron-separation energies in the nuclides {sup 92}Mo, {sup 98}Mo and {sup 100}Mo have been investigated at the ELBE accelerator. Because of the possible observation of transitions in the neighboring nuclei produced via ({gamma},n) reaction, additional measurements at electron energies of 8.4 and 7.8 MeV, below the neutron-separation energy, were performed on {sup 98}Mo and {sup 100}Mo, respectively. The number of transitions assigned to {sup 92}Mo, {sup 98}Mo and {sup 100}Mo is 340, 485 and 499, respectively, the main part of them being dipole transitions. Statistical properties of the observed transitions are obtained. The continuum contains the ground-state transitions as well as the branching transitions to the low-lying levels and the subsequent deexcitations of these levels. (orig.)

  14. Mo(ve)ment-methodology

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Christian Celosse-Andersen, Martin


    This paper describes the theoretical basis and development of a moment-movement research methodology, based on an integration of critical psychological practice research and critical ethnographic social practice theory. The paper illustrates how the mo(ve)ment methodology was applied in a study...... of major identity formation and gang exit processes, done together with a former biker gang member, Martin, becoming a research apprentice and more academically reflective, while moving beyond gang involvement. The paper empirically exemplifies the mo(ve)ment methodology presenting and analyzing one...

  15. Wood: a construction material for tall buildings (United States)

    Wimmers, Guido


    Wood has great potential as a building material, because it is strong and lightweight, environmentally friendly and can be used in prefabricated buildings. However, only changes in building codes will make wood competitive with steel and concrete.

  16. Ergonomics and safety in secondary wood processing (United States)

    Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih


    The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.


    The objective of this project was to evaluate the potential synergistic combinations of environmentally-safe biocides as wood preservatives. These wood preservatives could be potential replacements for the heavy-metal based CCA.Didecyldimethylammonium chloride [DDAC] was...

  18. Wood preservatives and pressure-treated wood: considerations for historic-preservation projects (United States)

    Ronald W. Anthony; Stan T. Lebow


    Wood, an abundant resource throughout most of the world, has been used as a building material for thousands of years. Many historic buildings have been built primarily of wood, and masonry and stone buildings generally have wood elements, both structural and architectural. As a biological material, wood is both remarkably complex and yet quite durable if well...

  19. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites (United States)

    Nicole M. Stark; Robert E. Rowlands


    Commercial wood flour, the most common wood-derived filler for thermoplastics, is produced in a mixture of particle sizes and generally has a lower aspect ratio than wood and other natural fibers. To understand how wood flour and fiber characteristics influence the mechanical properties of polypropylene composites, we first investigated the effect of different sizes of...

  20. Fuel wood symposium; Symposium Energieholz

    Energy Technology Data Exchange (ETDEWEB)

    Wild, C.; Wauer, A. (comps.)


    The Bavarian State Institute of Forestry (LWF) organised a 'Fuel Wood Symposium' in Freising-Weihenstephan on 17.11.2000. The purpose of this specialist conference was to give an overview of the use of biomass, especially wood, as an source of energy. (orig.) [German] Die Bayerische Landesanstalt fuer Wald und Forstwirtschaft richtete am 17.11.2000 in Freising-Weihenstephan das 'Symposium Energieholz' aus. Ziel der Fachtagung war es, einen Ueberblick ueber die energetische Nutzung von Biomasse, insbesondere Holz, zu geben. (orig.)

  1. Wood Properties and Kinds; A Base Syllabus on Wood Technology. (United States)

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. This booklet is concerned largely with the physical composition and…

  2. Bioremediation of treated wood with fungi (United States)

    Barbara L. Illman; Vina W. Yang


    The authors have developed technologies for fungal bioremediation of waste wood treated with oilborne or metal-based preservatives. The technologies are based on specially formulated inoculum of wood-decay fungi, obtained through strain selection to obtain preservative-tolerant fungi. This waste management approach provides a product with reduced wood volume and the...

  3. Effects of phosphoramides on wood dimensional stability (United States)

    Hong-Lin. Lee; George C. Chen; Roger M. Rowell


    To evaluate the dimensional stability of phosphoramide-reacted wood, wood was reacted with a mixture which was derived from compounding phosphorus pentoxide and each of 12 amines including alkyl, halophenyl, and phenyl amines in N,N-dimethylformamide. Dimensional stability of such reacted wood was analyzed by antishrink efficiency (ASE) using the water-soak method....

  4. Mapping wood production in European forests

    NARCIS (Netherlands)

    Verkerk, P.J.; Levers, C.; Kuemmerle, T.; Lindner, M.; Vanbuena, R.; Verburg, P.H.; Zudin, S.


    Wood production is an important forest use, impacting a range of other ecosystem services. However, information on the spatial patterns in wood production is limited and often available only for larger administrative units. In this study, we developed high-resolution wood production maps for

  5. Wood properties affecting finish service life (United States)

    R. Sam. Williams; Charles. Jourdain; George I. Daisey; Robert W. Springate


    Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth conditions, size of the tree at harvest, sawing, and other manufacturing processes. Some of the more important wood properties as they relate to wood finishing are discussed, e.g., growth rate, density, knots, extractives, juvenile...

  6. Build Green: Wood Can Last for Centuries (United States)

    Carol A. Clausen; Samuel V. Glass


    This report updates and revises information from the 1976 Forest Service publication by Rodney C. DeGroot, “Your Wood Can Last for Centuries.” It explains why wood decays, alerts the homeowner to conditions that can result in decay in buildings, and describes measures to prevent moisture-related damage to wood.

  7. Characteristics and availability of commercially important woods (United States)

    Regis B. Miller


    Throughout history, the unique characteristics and comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, and minor amounts (5% to 10%) of extraneous...

  8. European wood-pastures in transition

    DEFF Research Database (Denmark)

    Wood-pastures are important elements of European cultural identity and have an exceptional ecological value, yet they are in decline all over Europe. The structure of wood-pastures is strongly influenced by grazing and multiple other land uses and by local and regional environmental conditions. T...... conservation policies and management approaches for wood-pastures....

  9. Wood Flour Moulding Technology: Implications for Technical ...

    African Journals Online (AJOL)

    Wood Flour Moulding Technology: Implications for Technical Education in Nigeria. ... Interest in this modern industrial practice in wood anchors around the high level of unemployment among the youths in. Nigeria. ... flour moulding technology minimizes atmospheric pollution, reduces cost of wood waste disposal and curbs, ...

  10. The wood energy; Le bois energie

    Energy Technology Data Exchange (ETDEWEB)

    Vachey, C.


    This paper is a first approach of the wood energy. It presents the wood fuels, the automatic wood boilers for the collective buildings and the different domestic uses. An estimation of the cost and the advantages and disadvantages are also presented. (A.L.B.)

  11. Sustainable wood waste management in Nigeria

    Directory of Open Access Journals (Sweden)

    Owoyemi Jacob Mayowa


    Full Text Available Wood industries produce large volumes of residues which must be utilized, marketed or properly disposed of. Heaps of wood residues are common features in wood industries throughout the year. In Nigeria, this residue is generally regarded as waste and this has led to open burning practices, dumping in water bodies or dumping in an open area which constitutes environmental pollution. Sawmills in Nigeria generated over 1,000,000 m3 of wood waste in 2010 while about 5000 m3 of waste was generated in plywood mills. Nigeria generates about 1.8 million tons of sawdust annually and 5.2 million tons of wood wastes. The impact of improper disposal of waste wood on the environment affects both the aquatic and terrestrial ecosystems. Also burning of waste wood releases greenhouse gases into the atmosphere causing various health issues. Reuse/recycling of these wood residues in Nigeria will reduce the pressure on our ever decreasing forests, reduce environmental pollution, create wealth and employment. The literature available on this subject was reviewed and this article, therefore, focuses on the various methods of wood waste disposal and its utilization in Nigerian wood industries, the effects of wood waste on the environment as well as on human health and the benefits of proper wood waste management practices.

  12. Mechanical Behaviour of the Wood Masonry

    Directory of Open Access Journals (Sweden)

    Fazia FOUCHAL


    Full Text Available In this paper we study the walls wood masonry behaviour. First, we propose a regulatory validation of the walls wood masonry behaviour subjected to vertical and horizontal loads according to Eurocode 5. Then we present the numerical application on the wall wood supported two floors level.

  13. Determination of pectin content of eucalyptus wood

    NARCIS (Netherlands)

    Coetzee, B.; Schols, H.A.; Wolfaardt, F.


    Very little is known about the occurrence of pectin in wood and it is speculated that between 10 mg g-1 and 40 mg g-1 of wood consists of pectin. The present study aimed to quantify pectin in eucalyptus wood and to determine the influence of tree species, yield potential of the site, tree age class

  14. Cone calorimeter tests of wood composites (United States)

    Robert H. White; Kuma Sumathipala


    The cone calorimeter is widely used for the determination of the heat release rate (HRR) of building products and other materials. As part of an effort to increase the availability of cone calorimeter data on wood products, the U.S. Forest Products Laboratory and the American Wood Council conducted this study on composite wood products in cooperation with the Composite...

  15. Microstructure and properties of MoSi2-MoB and MoSi2-Mo5Si3 molybdenum silicides

    International Nuclear Information System (INIS)

    Schneibel, J.H.; Sekhar, J.A.


    MoSi 2 -based intermetallics containing different volume fractions of MoB or Mo 5 Si 3 were fabricated by hot-pressing MoSi 2 , MoB, and Mo 5 Si 3 powders in vacuum. Both classes of alloys contained approximately 5 vol.% of dispersed silica phase. Additions of MoB or Mo 5 Si 3 caused the average grain size to decrease. The decrease in the grain size was typically accompanied by an increase in flexure strength, a decrease in the room temperature fracture toughness, and a decrease in the hot strength (compressive creep strength) measured around 1200 deg. C, except when the Mo 5 Si 3 effectively became the major phase. Oxidation measurements on the two classes of alloys were carried out in air. Both classes of alloys were protected from oxidation by an in-situ adherent scale that formed on exposure to high temperature. The scale, although not analyzed in detail, is commonly recognized in MoSi 2 containing materials as consisting mostly of SiO 2 . The MoB containing materials showed an increase in the scale thickness and the cyclic oxidation rate at 1400 deg. C when compared with pure MoSi 2 . However, in contrast with the pure MoSi 2 material, oxidation at 1400 deg. C began with a weight loss followed by a weight gain and the formation of the protective silica layer. The Mo 5 Si 3 containing materials experienced substantial initial weight losses followed by regions of small weight changes. Overall, the MoB and Mo 5 Si 3 additions to MoSi 2 tended to be detrimental for the mechanical and oxidative properties

  16. Utilization of Wood Waste Mahang (Macaranga SP.) From Sawmill Industry for Making Wood Vinegar


    Sutrisno, Lis; Sulaeman, Rudianda; Sribudiani, Evi


    Wood vinegar is the result of condensation and combustion products directly or indirectly. One of the methodes to make wood vinegar is by condensing the smoke products of incomplete combustion (pyrolysis). Materials used for the manufacture of wood vinegar is mahang wood waste from the sawmill industry in the form of sawdust, shavings and slashes. This study aims to determine how much rendement, chemical constituents of wood vinegar (phenol, total acid and pH) as well as the colors of the v...

  17. K2MoO4-CaMoO4-BaMoO4 system

    International Nuclear Information System (INIS)

    Gasanaliev, A.M.; Trunin, A.S.; Dibirov, M.A.


    The liquidus of the K 2 MoO 4 -CaMoO 4 -BaMoO 4 ternary system has been studied by differential thermal (DTA) and by visual polythermal (VPT) analyses. The compositions and temperatures of non-variant points have been determined, the borders between the crystallizing phase regions being found

  18. Body of Wood

    Directory of Open Access Journals (Sweden)

    Pierre Michon


    not only a defrocked friar with the guys or on the street; he donned the silk babouches when he went home too. He dispossessed himself of the Seine that rolled on before his eyes; the small girl who lived on her feet, whom he puts to death in all his books, he hardly saw her; the loveliest girls of his day, the finest too for sure, who wanted him, so that he happened to come – he dispossessed himself of them, whether he came or opted to come no more, which amounted to the same thing; no apples from Norman orchards, no trees deep in the woods, no unlaced Louise Colet, no lilies, no young laughter, no Louise Colet weeping at his door, he kissed it all off, laughed over it and kissed it off, cried about it and kissed it off, he was not there. In fact he had nothing, he was deprived of everything, since it was in his head.

  19. Nanoindentation size effects in wood (United States)

    Joseph E. Jakes; Donald S. Stone; Charles R. Frihart


    The purpose of this work was to test some of the assumptions underlying methods currently employed to investigate nanoindentation properties of wood. We examined whether hardness and modulus depend on load. We employed a surface preparation technique that minimizes alterations of cell wall properties. Areas were determined using both (a) Oliver-Pharr method and (b) a...

  20. Adhesive bonding of wood materials (United States)

    Charles B. Vick


    Adhesive bonding of wood components has played an essential role in the development and growth of the forest products industry and has been a key factor in the efficient utilization of our timber resource. The largest use of adhesives is in the construction industry. By far, the largest amounts of adhesives are used to manufacture building materials, such as plywood,...

  1. The Hygroscopic Nature of Wood, (United States)

    The cell walls of wood are organized as a structural system involving filamentous microfibrils , oriented essentially in the direction of the...longitudinal axis embedded in an amorphous matrix of noncrystalline cellulose , hemicelluloses, and lignin. The molecules in the amorphous regions, primarily

  2. China: changing wood products markets (United States)

    Daowei Zhang; Junchang Liu; James Granskog; Jianbang Gan


    In the 1980's, China emerged as the world's second largest importer of forest products and the second largest importer of U.S. forest products. However, U.S. wood products exports to China declined nearly 93 percent from 1988 to 1996, from >/=448 million to >/=33 million. Little is known about the reasons that caused this decline. Less is probably known...

  3. Wood and concrete polymer composites

    International Nuclear Information System (INIS)

    Singer, K.


    There are several ways to prepare and use wood and concrete polymer composites. The most important improvements in the case of concrete polymer composites are obtained for compressive and tensile strengths. The progress in this field in United States and other countries is discussed in this rview. (M.S.)

  4. Nanoscale Phenomena Occurring during Pyrolysis of Salix viminalis Wood

    Directory of Open Access Journals (Sweden)

    Aleksandra W. Cyganiuk


    Full Text Available Selective utilisation of unique properties of Salix viminalis wood enables preparation of materials of nanotechnologic properties. Thermal decomposition of lignin-cellulose organic matter results in the formation of a nanostructured porous carbon matrix (charcoal. Narrowed pore size distribution (PSD in the subnanometer range allows to consider the charcoals as carbon molecular sieves (CMSs, which are capable of separating even chemically inert gases like neon, krypton, and nitrogen. High tolerance of Salix viminalis to heavy metal ions enables enriching living plant tissues with metal ions like lanthanum and manganese. Such ions may later form LaMnO3 with parallel transformation of plant tissues (organic matter to carbon matrix using a heat treatment. In this way, one gets a hybrid material: a porous carbon matrix with uniformly suspended nanocrystallites of LaMoO3. The crystallites are in the catalytically active phase during the conversion of n-butanol to heptanone-4 with high yield and selectivity.

  5. Optimization of the Processing of Mo Disks

    Energy Technology Data Exchange (ETDEWEB)

    Tkac, Peter [Argonne National Lab. (ANL), Argonne, IL (United States); Rotsch, David A. [Argonne National Lab. (ANL), Argonne, IL (United States); Stepinski, Dominique [Argonne National Lab. (ANL), Argonne, IL (United States); Makarashvili, Vakhtang [Argonne National Lab. (ANL), Argonne, IL (United States); Harvey, James [NorthStar Medical Technologies, LLC, Madison, WI (United States); Vandegrift, George F. [Argonne National Lab. (ANL), Argonne, IL (United States)


    The objective of this work is to decrease the processing time for irradiated disks of enriched Mo for the production of 99Mo. Results are given for the dissolution of nonirradiated Mo disks, optimization of the process for large-scale dissolution of sintered disks, optimization of the removal of the main side products (Zr and Nb) from dissolved targets, and dissolution of irradiated Mo disks.

  6. Measurement and Estimation of the 99Mo Production Yield by 100Mo(n,2n)99Mo (United States)

    Minato, Futoshi; Tsukada, Kazuaki; Sato, Nozomi; Watanabe, Satoshi; Saeki, Hideya; Kawabata, Masako; Hashimoto, Shintaro; Nagai, Yasuki


    We, for the first time, measured the yield of 99Mo, the mother nuclide of 99mTc used in nuclear medicine diagnostic procedures, produced by the 100Mo(n,2n)99Mo reaction with accelerator neutrons. The neutrons with a continuous energy spectrum from the thermal energy up to about 40 MeV were provided by the C(d,n) reaction with 40 MeV deuteron beams. It was proved that the 99Mo yield agrees with that estimated by using the latest data on neutrons from the C(d,n) reaction and the evaluated cross section of the 100Mo(n,2n)99Mo reaction given in the Japanese Evaluated Nuclear Data Library. On the basis of the agreement, a systematic calculation was carried out to search for an optimum condition that enables us to produce as much 99Mo as possible with a good 99Mo/100Mo value from an economical point of view. The calculated 99Mo yield from a 150 g 100MoO3 sample indicated that about 30% of the demand for 99Mo in Japan can be met with a single accelerator capable of 40 MeV, 2 mA deuteron beams. Here, by referring to an existing 18F-fluorodeoxyglucose (FDG) distribution system we assumed that 99mTc radiopharmaceuticals formed after separating 99mTc from 99Mo can be delivered to hospitals from a radiopharmaceutical company within 6 h. The elution of 99mTc from 99Mo twice a day would meet about 50% of the demand for 99Mo.

  7. Kinetic investigation of wood pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Thurner, F.; Mann, U.; Beck, S. R.


    The objective of this investigation was to determine the kinetics of the primary reactions of wood pyrolysis. A new experimental method was developed which enabled us to measure the rate of gas, tar, and char production while taking into account the temperature variations during the wood heating up. The experimental method developed did not require any sophisticated instruments. It facilitated the collection of gas, tar and residue (unreacted wood and char) as well as accurate measurement of the temperature inside the wood sample. Expressions relating the kinetic parameters to the measured variables were derived. The pyrolysis kinetics was investigated in the range of 300 to 400/sup 0/C at atmospheric pressure and under nitrogen atmosphere. Reaction temperature and mass fractions of gas, tar, and residue were measured as a function of time. Assuming first-order reactions, the kinetic parameters were determined using differential method. The measured activation energies of wood pyrolysis to gas, tar, and char were 88.6, 112.7, and 106.5 kJ/mole, respectively. These kinetic data were then used to predict the yield of the various pyrolysis products. It was found that the best prediction was obtained when an integral-mean temperature obtained from the temperature-time curve was used as reaction temperature. The pyrolysis products were analyzed to investigate the influence of the pyrolysis conditions on the composition. The gas consisted mainly of carbon dioxide, carbon monoxide, oxygen, and C/sub 3//sup +/-compounds. The gas composition depended on reaction time as well as reactor temperature. The tar analysis indicated that the tar consisted of about seven compounds. Its major compound was believed to be levoglucosan. Elemental analysis for the char showed that the carbon content increased with increasing temperature.

  8. Materials selection for a transport packaging of Mo-99

    Energy Technology Data Exchange (ETDEWEB)

    Hara, Debora H.S.; Lucchesi, Raquel F.; Mancini, Victor A.; Rossi, Jesualdo L., E-mail: [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Fiore, Marina [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Engenharia Metalurgica e de Materiais. Escola Politecnica


    The radiopharmaceuticals are radioactive isotopes used in nuclear medicine for more accurate diagnosis and treatment of diseases or dysfunctions. Currently, the most important radionuclide for the preparation of radiopharmaceuticals for diagnostic purposes is technetium-99m ({sup 99m}Tc), a product of the radioactive decay of molybdenum-99 (Mo-99). The aim of this work was the materials selection that can enable the manufacture of a package for Mo-99 transport with the aid of CES EduPack program and the methodology developed by Ashby. The ESTAR program was used to check the occurrence of Bremsstrahlung and the XCOM program was used to calculate the attenuation coefficient of gamma radiation from some of the selected materials for the shield; after, the thickness required for radiation shielding was calculated. From the results, the materials selected as potential candidates for the manufacture of the shielding were the tungsten alloys. Related to the thermal insulation and the impact protection, woods, plywoods and particle boards stand out. With regard to internal and external coatings, the selected materials focus on groups of steels and nickel alloys. (author)

  9. Materials selection for a transport packaging of Mo-99

    International Nuclear Information System (INIS)

    Hara, Debora H.S.; Lucchesi, Raquel F.; Mancini, Victor A.; Rossi, Jesualdo L.; Fiore, Marina


    The radiopharmaceuticals are radioactive isotopes used in nuclear medicine for more accurate diagnosis and treatment of diseases or dysfunctions. Currently, the most important radionuclide for the preparation of radiopharmaceuticals for diagnostic purposes is technetium-99m ( 99m Tc), a product of the radioactive decay of molybdenum-99 (Mo-99). The aim of this work was the materials selection that can enable the manufacture of a package for Mo-99 transport with the aid of CES EduPack program and the methodology developed by Ashby. The ESTAR program was used to check the occurrence of Bremsstrahlung and the XCOM program was used to calculate the attenuation coefficient of gamma radiation from some of the selected materials for the shield; after, the thickness required for radiation shielding was calculated. From the results, the materials selected as potential candidates for the manufacture of the shielding were the tungsten alloys. Related to the thermal insulation and the impact protection, woods, plywoods and particle boards stand out. With regard to internal and external coatings, the selected materials focus on groups of steels and nickel alloys. (author)

  10. Wood pellets : a worldwide fuel commodity

    International Nuclear Information System (INIS)

    Melin, S.


    Aspects of the wood pellet industry were discussed in this PowerPoint presentation. Details of wood pellets specifications were presented, and the wood pellet manufacturing process was outlined. An overview of research and development activities for wood pellets was presented, and issues concerning quality control were discussed. A chart of the effective calorific value of various fuels was provided. Data for wood pellet mill production in Canada, the United States and the European Union were provided, and various markets for Canadian wood pellets were evaluated. Residential sales as well as Canadian overseas exports were reviewed. Production revenues for British Columbia and Alberta were provided. Wood pellet heat and electricity production were discussed with reference to prefabricated boilers, stoves and fireplaces. Consumption rates, greenhouse gas (GHG) emissions, and fuel ratios for wood pellets and fossil fuels were compared. Price regulating policies for electricity and fossil fuels have prevented the domestic expansion of the wood pellet industry. There are currently no incentives for advanced biomass combustion to enter British Columbia markets, and this has led to the export of wood pellets. It was concluded that climate change mitigation policies will be a driving force behind market expansion for wood pellets. tabs., figs

  11. Natural radionuclides and radiocaesium contained in wood

    International Nuclear Information System (INIS)

    Mahmoud, Kamal Reyad; El-Husseiny, Fathy Ahmed; Badran, Hussein Mahmoud


    The activity concentrations of natural ( 226 Ra, 232 Th and 40 K) and anthropogenic ( 137 Cs) radioactive elements in local and imported wood samples have been investigated during the last few years. Seven local and four imported wood types were measured. The activities of the natural isotopes in both local and imported wood samples were comparable. The Chernobyl accident didn't only affect European countries through contamination of the forested but also non-wood producing countries like Egypt. A fraction of the deposited fallout radionuclides has become incorporated into wood. Most of the imported samples (∼ 83%) showed measurable concentration of 137 Cs. The average 137 Cs activity levels in local and imported wood were 0.16 and 2.75 Bq/kg dry weight, respectively. The result of this study has its importance to many other wood-importing countries. (author)

  12. Mathematical Simulation of Temperature Profiles within Microwave Heated Wood Made for Wood-Based Nano composites

    International Nuclear Information System (INIS)

    Li, X.; He, X.; Lv, J.; Wu, Y.; Luo, Y.; Chen, H.


    High intensive microwave pretreatment is a new method to modify wood for the fabrication of wood-based nano composites. Based on the physical law on heat transfer, a mathematical model to describe the temperature profiles within wood heated by high intensive microwave was established and simulated in this research. The results showed that the temperature profiles within wood were related to microwave heating methods; The temperature inside wood firstly increased and then gradually decreased along the direction of microwave transmission when the unilateral microwave heating was applied, and the temperature difference along the thickness direction of wood was very significant; The temperature with wood firstly increased and then gradually decreased from the wood surface to interior when the bilateral microwave heating was applied. Compared with the unilateral microwave heating, bilateral microwave heating is a better microwave heating method for the more uniform wood microwave pretreatment.


    Directory of Open Access Journals (Sweden)

    Gradimir Danon


    Full Text Available Wood biomass has got its place in the energy balance of Montenegro. A little more than 6% of the total energy consumption is obtained by burning wood. Along with the appropriate state measures, it is economically and environmentally justified to expect Montenegro to more than double the utilization of the existing renewable energy sources including wood biomass, in the near future. For the purpose of achieving this goal, ‘Commercial Utilisation of the Wood Residue as a Resource for Economic Development in the North of Montenegro' project was carried out in 2007. The results of this project were included in the plan of the necessary interventions of the Government and its Agencies, associations or clusters, non-government organisations and interested enterprises. The plan was made on the basis of the wood residue at disposal and the attitude of individual subjects to produce and/or use solid bio-fuels and consists of a proposal of collection and utilisation of the wood residue for each individual district in the north of Montenegro. The basic factors of sustainability of future commercialisation of the wood residue were: availability of the wood raw material, and thereby the wood residue; the development of wood-based fuel markets, and the size of the profit.

  14. Wood energy and air quality

    International Nuclear Information System (INIS)


    This publication first recalls the main benefits of the use of wood, the first source of renewable energy in France: abundant and local resource, low CO 2 emission, competitiveness, job creation. It comments the relationship between the use of this source of energy and the compliance with air quality standards as they are notably defined by European directives, as the use of wood as heating source is one of the recommended lever to improve air quality. The publication comments emissions generated by this type of heating (mainly in the housing sector, with some critical meteorological periods). Levers for actions are discussed: fleet renewal to promote the best performing equipment, practice improvements (fuel quality, apparatus maintenance). Actions undertaken by the ADEME are briefly reviewed: support to individual equipment fleet modernisation, support to R and D, support to the sector, and information and communication

  15. Wood construction under cold climate

    DEFF Research Database (Denmark)

    Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror


    was sensitive to temperature change. MUF, PRF and PVAc resins demonstrated different characters with Norway spruce and Scot pine. At room temperature, all types of adhesive showed relative stability, in terms of shear strength variation. While at low temperature, the shear strength varied considerably. More......) and Scots pine (Pinus sylvestris) joints (150mm x 20mm x 10mm) were bonded with seven commercially available resins (PUR, PVAc, EPI, MF, MUF1, PRF and MUF2) and tested at six temperatures (20, -20, -30, -40, -50 and -60 °C), respectively. Generally, for both species, temperature changes significantly...... affected shear strength of wood joints. As temperature decreased, the shear strength decreased. PUR resin resulted in the strongest shear strength at all temperatures tested. MF resin responded to temperature changes in a similar ways as the PUR resin. The shear strength of wood joints with EPI resins...

  16. Discover the benefits of residential wood heating

    International Nuclear Information System (INIS)


    This publication described how residential wood-heating systems are being used to reduce energy costs and increase home comfort. Biomass energy refers to all forms are renewable energy that is derived from plant materials. The source of fuel may include sawmills, woodworking shops, forest operations and farms. The combustion of biomass is also considered to be carbon dioxide neutral, and is not considered to be a major producer of greenhouse gases (GHG) linked to global climate change. Wood burning does, however, release air pollutants, particularly if they are incompletely burned. Incomplete combustion of wood results in dense smoke consisting of toxic gases. Natural Resources Canada helped create new safety standards and the development of the Wood Energy Technical Training Program to ensure that all types of wood-burning appliances are installed correctly and safely to reduce the risk of fire and for effective wood heating. In Canada, more than 3 million families heat with wood as a primary or secondary heating source in homes and cottages. Wood heating offers security from energy price fluctuations and electrical power failures. This paper described the benefits of fireplace inserts that can transform old fireplaces into modern heating systems. It also demonstrated how an add-on wood furnace can be installed next to oil furnaces to convert an oil-only heating system to a wood-oil combination system, thereby saving thousands of dollars in heating costs. Wood pellet stoves are another wood burning option. The fuel for the stoves is produced from dried, finely ground wood waste that is compressed into hard pellets that are loaded into a hopper. The stove can run automatically for up to 24 hours. New high-efficiency advanced fireplaces also offer an alternative heating system that can reduce heating costs while preserving Canada's limited supply of fossil fuels such as oil and gas. 13 figs

  17. North America's wood pellet sector (United States)

    Henry Spelter; Daniel Toth


    The North American wood pellet sector is profiled in this paper. A small pellet industry has existed since the 1930s, but its main growth occurred in the wake of the energy crisis in the 1970s. Its current spurt is even greater, growing from is set to reach 6.2 million in 2009. Most plants are small, relying on sawmill residues for fiber and thus are limited to 100,000...

  18. Carbon Sequestration via Wood Burial (United States)

    Zeng, N.


    To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which forest dead wood or old trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It was estimated that the carbon sequestration potential of forest wood harvest and burial is 10GtC y-1 with an uncertainty range of 5-15 GtC y-1. Based on data from North American logging industry, the cost was crudely estimated at $50/tC, significantly lower than the cost for power plant CO2 capture with geological storage, a carbon sequestration technique currently under most serious consideration. The low cost is largely because the CO2 capture is achieved at little cost by the natural process of photosynthesis. The technique is low tech, distributed, safe and can be stopped or reversed at any time. The relatively low cost may soon be competitive enough for large-scale implementation in a world-wide carbon trading market. In tropical regions with ongoing deforestation, wood burial instead of burning will immediately reduce that portion of the anthropogenic CO2 emission.

  19. Blood parasites of wood ducks (United States)

    Herman, C.M.; Knisley, J.O.; Knipling, G.D.


    Examination of blood films from wood ducks (Aix sponsa) from several northeastern states revealed Haemoproteus, Leucocytozoon, Plasmodium and a typanosome. Haemoproteus occurred in all areas sampled and birds of the year from Massachusetts demonstrated the highest incidence during the last 2 weeks in August. Leucocytozoon was most prevalent in more northern areas. P. circumflexum and a trypanosome are reported for the first time from this host.

  20. Status of Wood Processing and Storage in Nigeria | Ohagwu ...

    African Journals Online (AJOL)

    The work showcases wood processing and storage operations in Nigeria. The importance of wood as a multipurpose biomaterial were discussed as well as its nature, characteristics, lumbering pattern and other product derived from wood. The available wood/timber in Nigeria as well as the unit operations in wood ...

  1. Chapter 02: Basic wood biology—Anatomy for identification (United States)

    Alex Wiedenhoeft


    Before the topics of using a hand lens, preparing wood for observation, and understanding the characters used in wood identification can be tackled, a general introduction to the biology of wood must be undertaken. The woods in commercial trade in Central America come almost exclusively from trees, so the discussion of wood biology is restricted to trees here, though...

  2. Mechanical properties of small-scale wood laminated composite poles (United States)

    Cheng Piao; Todd F. Shupe; Chung Y. Hse


    Power companies in the United States consume millions of solid wood poles every year. These poles are from high-valued trees that are becoming more expensive and less available. wood laminated composite poles (LCP) are a novel alternative to solid wood poles. LCP consists of trapezoid wood strips that are bonded by a synthetic resin. The wood strips can be made from...

  3. Carbon sequestration via wood burial

    Directory of Open Access Journals (Sweden)

    Zeng Ning


    Full Text Available Abstract To mitigate global climate change, a portfolio of strategies will be needed to keep the atmospheric CO2 concentration below a dangerous level. Here a carbon sequestration strategy is proposed in which certain dead or live trees are harvested via collection or selective cutting, then buried in trenches or stowed away in above-ground shelters. The largely anaerobic condition under a sufficiently thick layer of soil will prevent the decomposition of the buried wood. Because a large flux of CO2 is constantly being assimilated into the world's forests via photosynthesis, cutting off its return pathway to the atmosphere forms an effective carbon sink. It is estimated that a sustainable long-term carbon sequestration potential for wood burial is 10 ± 5 GtC y-1, and currently about 65 GtC is on the world's forest floors in the form of coarse woody debris suitable for burial. The potential is largest in tropical forests (4.2 GtC y-1, followed by temperate (3.7 GtC y-1 and boreal forests (2.1 GtC y-1. Burying wood has other benefits including minimizing CO2 source from deforestation, extending the lifetime of reforestation carbon sink, and reducing fire danger. There are possible environmental impacts such as nutrient lock-up which nevertheless appears manageable, but other concerns and factors will likely set a limit so that only part of the full potential can be realized. Based on data from North American logging industry, the cost for wood burial is estimated to be $14/tCO2($50/tC, lower than the typical cost for power plant CO2 capture with geological storage. The cost for carbon sequestration with wood burial is low because CO2 is removed from the atmosphere by the natural process of photosynthesis at little cost. The technique is low tech, distributed, easy to monitor, safe, and reversible, thus an attractive option for large-scale implementation in a world-wide carbon market.

  4. Atmospheric Hydrodeoxygenation of Biomass Fast Pyrolysis Vapor by MoO3

    DEFF Research Database (Denmark)

    Zhou, Guofeng; Jensen, Peter Arendt; Le, Duy Michael


    16.2 wt %daf organic liquid, while achieving 52% degree of deoxygenation at 450 °C catalyst temperature under 89 vol % H2 concentration. The corresponding energy recovery in the liquid phase was 23.5%. The spent catalyst showed two deactivation routes, coke formation and reduction of MoO3 to MoO2......, which is inactive in HDO. The catalyst experienced severe reduction at temperatures higher than 400 °C. The yields of coke relative to the fed biomass were in the range of 3–4 wt %daf for lignin and 5–6 wt %daf for wood. Compared to untreated bio-oil the upgraded lignin organic liquid showed improved...

  5. Power and efficiency of wood burning furnaces

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, D.; Froment, G.; Kubala, J.F.; Chantret, A.; Renault, G.


    In 1981 an automated test rig for wood boilers was set up at the COSTIC. The special characteristics of wood combustion made it necessary to develop a computerized measuring method that enables the progress of this combustion to be followed step by step in the furnaces. After a number of preliminary adjustments, it is possible to move on to a series of tests during which the essential difficulty is to assess the wood consumption.

  6. Wood Energy Potential in Northwestern South Carolina (United States)

    James W. McMinn


    The quantity of unused wood in an Ill-county area in northwestern South Carolina was projected to be more than 16 million tons annually. Wood that is unsuitable for products other than fuel amounts to nearly 9 million tons annually.The most likely energy demand by industrial plants that are good candidates for wood fuel systems is 1.5 million tons annually.Maximum...

  7. Wood's light in Microsporum canis positive patients. (United States)

    Kefalidou, S; Odia, S; Gruseck, E; Schmidt, T; Ring, J; Abeck, D


    In 64 patients with culturally proven Microsporum canis infections, Wood's light examination was performed. In 30 patients (47%) the characteristic fluorescence correlated with the cultural findings, whereas in the remaining 34 patients (53%), Microsporum canis was isolated, although Wood's light examination was negative. Of the 30 positive and 34 negative cases eight patients of each group had been pre-treated. From the results presented, Wood's light examination has a poor sensitivity in cases of Microsporum canis-infections.

  8. Properties of laminated strand panels used as an alternative to solid wood

    Directory of Open Access Journals (Sweden)

    Alex Gomes Bravim


    Full Text Available Laminated strand lumber and oriented strand lumber (LSL/OSL are structural composite lumber, which has beenrecently introduced in the building construction market, as an alternative to solid wood utilization. This research aimed to analyze thetechnical feasibility of producing LSL and OSL. Additionally, it was also investigated the effect of using different lengths of particles onphysical and mechanical properties of the composites and comparing it to Chrysophyllum sp solid wood. Six wood panels wereproduced, utilizing particles of 15 and 30 centimeters of length, divided into two analyses (OSL/LSL, with three repetitions in eachone. The following tests were performed: static bending (MOE//, MOR// non-destructive testing (MOEd//, parallel compressionstrength (COMP//; thickness swelling (TS, water absorption (AA and linear expansion (EL for 2 and 24 hours. These tests wereconducted according to the ASTM D 5456 (ASTM, 2006. It was not identified the effect of particle length on mechanical properties.On the other hand, the composite produced with shorter particles (OSL presented better dimensional stability than the LSL, producedwith longer ones. Flexural properties and compression strength of OSL/LSL composites presented values close, but still lower, thanthose observed for solid wood.

  9. Effect of Wood Aging on Wine Mineral Composition and87Sr/86Sr Isotopic Ratio. (United States)

    Kaya, Ayse D; Bruno de Sousa, Raúl; Curvelo-Garcia, António S; Ricardo-da-Silva, Jorge M; Catarino, Sofia


    The evolution of mineral composition and wine strontium isotopic ratio 87 Sr/ 86 Sr (Sr IR) during wood aging were investigated. A red wine was aged in stainless steel tanks with French oak staves (Quercus sessiliflora Salisb.), with three industrial scale replicates. Sampling was carried out after 30, 60, and 90 days of aging, and the wines were evaluated in terms of general analysis, phenolic composition, total polysaccharides, multielement composition, and Sr IR. Li, Be, Mg, Al, Sc, Ti, V, Mn, Co, Ni, Cu, Zn, Ga, Ge, As, Rb, Sr, Y, Zr, Mo, Sb, Cs, Ba, Pr, Nd, Sm, Eu, Dy, Ho, Er, Yb, Lu, Tl, and Pb elements and 87 Sr/ 86 Sr were determined by quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS) and Na, K, Ca, and Fe by flame atomic absorption spectrometry (FAAS). Two-way ANOVA was applied to assess wood aging and time effect on Sr IR and mineral composition. Wood aging resulted in significantly higher concentrations of Mg, V, Co, Ni, and Sr. At the end of the aging period, wine exhibited statistically identical Sr IR compared to control. Study suggests that wood aging does not affect 87 Sr/ 86 Sr, not precluding the use of this parameter for wine traceability purposes.

  10. Study of wood polymer combinations for various woods of Kashmir - Part I

    International Nuclear Information System (INIS)

    Mohan, H.; Rao, K.N.


    The report describes the studies conducted to upgrade inferior woods in Kashmir by the method of radiation polymerisation. The normal qualities of wood are retained and modifications brought about in unfavourable properties such as softness, dimensional instability, hygroscopicity and compressibility. Various changes in properties of wood after the modifications are discussed. It is shown that 50% of polymer content in wood considerably improves the physical and mechanical properties. (author)

  11. The use of new, aqueous chemical wood modifications to improve the durability of wood-plastic composites (United States)

    Rebecca E. Ibach; Craig M. Clemons; George C. Chen


    The wood flour used in wood-plastic composites (WPCs) can biologically deteriorate and thus the overall mechanical performance of WPCs decrease when exposed to moisture and fungal decay. Protecting the wood flour by chemical modification can improve the durability of the wood in a nontoxic way so it is not harmful to the environment. WPCs were made with modified wood...

  12. Wood-energy in Europe: resources, technologies

    International Nuclear Information System (INIS)

    Defaye, S.


    A voluntaristic policy for the development of wood fuel would contribute to save energy and to protect the environment. Different strategies of development exist at the European scale as demonstrated by a recent report ordered by the French agency of environment and energy mastery (ADEME). This paper gives a synthesis of this report. It deals successively with: the European wood resources (the northern and continental forests, the mountain and bocage regions, the Mediterranean forests); the 3 main resources: forest exploitation, wood transformation, recycling of waste wood; the different economical status of wood resources; the place of wood-fuel in the economy: estimation, complementarity of industrial and energy uses; technological files and perspectives of development: collection, transport, conditioning, fuel production and supply, technologies of energy production from wood (domestic heating, collective heating, cogeneration and mixed wood-coal combustion); future markets; strategy of development: forestry and agriculture, management, producers, environmental aspects, afforestation of abandoned lands, employment...; policies of European, national and regional authorities: political and financial help, regulations and standardizations, financial helps and fiscal policy, inter-region cooperation and R and D, advice and communication; contribution of wood-fuel to the energy supply of Europe. (J.S.)

  13. Wood energy 2000; Bois energie 2000

    Energy Technology Data Exchange (ETDEWEB)

    Druette, L. [Centre Scientifique et Technique du Batiment, (CSTB), 44 - Nantes (France); Lacome, T. [AFNOR, 75 - Paris (France); Roy, C. [Agence de l' Environnement et de la Maitrise de l' Energie, ADEME, 75 - Paris (France)] [and others


    The deregulation of the Electric Market and the opening of the Green Certificate exchange market force the set up of renewable energies. The wood, which is for most of european countries an important part of renewable fuel, should see the increase of its utilization. This conference on the wood energy deals the main aspects of this energy development. The papers present the wood burning furnaces technology assessment, the wood fuel market and the standardization of the appliances in this domain. Some papers also include the consequences of the big storms of december 1999. (A.L.B.)

  14. The effect of wood extractives on the thermal stability of different wood species

    Energy Technology Data Exchange (ETDEWEB)

    Shebani, A.N.; Reenen, A.J. van [Department of Chemistry and Polymer Science, University of Stellenbosch, Private Bag X1, Matieland 7602 (South Africa); Meincken, M. [Department of Forest and Wood Science, University of Stellenbosch, Private Bag X1, Matieland 7602 (South Africa)], E-mail:


    This study compares the thermal stability of different wood species, which is an important factor for the production of wood-polymer composites (WPCs), and investigates the effect of extraction on thermal properties. The chemical composition of four wood species -Quercus alba, Pinus radiata, Eucalyptus grandis and Acacia cyclops - has been determined, as the species is expected to affect the thermal stability of wood. Subsequently, the hot-water (HW) extractives, ethanol/cyclohexane (E/C) extractives and both extractives were eliminated from the wood via Soxhlet extraction and the thermal stability of the wood determined with thermogravimetric analysis (TGA) under identical conditions. The results suggest that a higher cellulose and lignin content leads to better thermal stability of wood in different temperature regimes. In all cases, the removal of extractives improved the thermal stability of the wood. The effect of combined extractions was more pronounced than of an individual extraction and E/C-extraction caused less improvement in the thermal stability of wood than HW extraction. The degradation of the investigated wood extractives occurred at low rates over a broad temperature range. Pure cellulose exhibited superior thermal stability compared to wood, but differences were observed between the investigated wood species.

  15. Energy wood. Part 2b: Wood pellets and pellet space-heating systems

    International Nuclear Information System (INIS)

    Nussbaumer, T.


    The paper gives an overview on pellet utilization including all relevant process steps: Potential and properties of saw dust as raw material, pellet production with drying and pelletizing, standardization of wood pellets, storage and handling of pellets, combustion of wood pellets in stoves and boilers and applications for residential heating. In comparison to other wood fuels, wood pellets show several advantages: Low water content and high heating value, high energy density, and homogeneous properties thus enabling stationary combustion conditions. However, quality control is needed to ensure constant properties of the pellets and to avoid the utilization of contaminated raw materials for the pellet production. Typical data of efficiencies and emissions of pellet stoves and boilers are given and a life cycle analysis (LCA) of wood pellets in comparison to log wood and wood chips is described. The LCA shows that wood pellets are advantageous thanks to relatively low emissions. Hence, the utilization of wood pellet is proposed as a complementary technology to the combustion of wood chips and log wood. Finally, typical fuel cost of wood pellets in Switzerland are given and compared with light fuel oil. (author)

  16. Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species (United States)

    Lanying Lin; Sheng He; Feng Fu; Xiping Wang


    Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

  17. The central role of wood biology in understanding the durability of wood-coating interactions (United States)

    Alex C. Wiedenhoeft


    To design effectively for durability, one must actively and honestly assess the material properties and limitations of each of the components in the design system; wood or wood composite, and the coating. Inasmuch as wood coatings are manufactured to specified tolerances from known materials, we have control of that component of the system. Compared to manmade...

  18. Moisture Performance of wood-plastic composites reinforced with extracted and delignified wood flour (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan


    This study investigated the effect of using extracted and delignified wood flour on water sorption properties of wood–plastic composites. Wood flour (WF) extraction was performed with three solvent systems: toluene/ethanol (TE), acetone/water (AW), and hot water (HW); delignification was conducted using sodium chlorite/acetic acid solution. A 24 full-factorial...

  19. Weathering characteristics of wood plastic composites reinforced with extracted or delignified wood flour (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan


    This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial...

  20. Mo(ve)ment-methodology

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Christian Celosse-Andersen, Martin


    conditions and identity formation, are discussed in relation to criminological theories of gang desistance. The paper illustrates how the mo(ve)ment methodology was applied in a study of comprehensive processes of identity (re)formation and gang exit processes. This study was conducted with Martin, a former......This paper describes the theoretical basis for and development of a moment-movement research methodology, based on an integration of critical psychological practice research and critical ethnographic social practice theory. Central theoretical conceptualizations, such as human agency, life...

  1. Variation in wood nutrients along a tropical soil fertility gradient. (United States)

    Heineman, Katherine D; Turner, Benjamin L; Dalling, James W


    Wood contains the majority of the nutrients in tropical trees, yet controls over wood nutrient concentrations and their function are poorly understood. We measured wood nutrient concentrations in 106 tree species in 10 forest plots spanning a regional fertility gradient in Panama. For a subset of species, we quantified foliar nutrients and wood density to test whether wood nutrients scale with foliar nutrients at the species level, or wood nutrient storage increases with wood density as predicted by the wood economics spectrum. Wood nutrient concentrations varied enormously among species from fourfold in nitrogen (N) to > 30-fold in calcium (Ca), potassium (K), magnesium (Mg) and phosphorus (P). Community-weighted mean wood nutrient concentrations correlated positively with soil Ca, K, Mg and P concentrations. Wood nutrients scaled positively with leaf nutrients, supporting the hypothesis that nutrient allocation is conserved across plant organs. Wood P was most sensitive to variation in soil nutrient availability, and significant radial declines in wood P indicated that tropical trees retranslocate P as sapwood transitions to heartwood. Wood P decreased with increasing wood density, suggesting that low wood P and dense wood are traits associated with tree species persistence on low fertility soils. Substantial variation among species and communities in wood nutrient concentrations suggests that allocation of nutrients to wood, especially P, influences species distributions and nutrient dynamics in tropical forests. © 2016 The Authors. New Phytologist © 2016 New Phytologist Trust.

  2. The Wood Anatomy of Rubiaceae tribes Anthospermeae and Paederieae

    NARCIS (Netherlands)

    Koek-Noorman, J.; Puff, Ch.


    Detailed wood anatomical descriptions are given for the genera Anthospermum, Nenax, Phyllis, Carpacoce, Coprosma, Neogaillonia, Crocyllis, Plocama and Spermadictyon, and miscellaneous wood anatomical data on the genera Normandia, Pomax, Opercularia, Leptodermis and Aitchisonia. The wood anatomical

  3. The role of wood anatomy in phylogeny reconstruction of Ericales

    NARCIS (Netherlands)

    Lens, F.; Schönenberger, J.; Baas, P.; Jansen, S.; Smets, E.


    The systematic significance of wood anatomical characters within Ericales is evaluated using separate and combined parsimony analyses including 23 wood characters and 3945 informative molecular characters. Analyses of wood features alone result in poorly resolved and conflicting topologies. However,

  4. Nodulação e fixação biológica de nitrogênio de Adesmia latifolia e Lotus corniculatus em vasos de Leonard Nodulation and biological nitrogen fixation of Adesmia latifolia and Lotus corniculatus in Leonard jars

    Directory of Open Access Journals (Sweden)

    Simone Meredith Scheffer-Basso


    Full Text Available Adesmia latifolia, que é uma leguminosa forrageira nativa do Sul do Brasil, destaca-se pelo seu hábito de crescimento estolonífero e por produzir forragem durante a estação fria. O Lotus corniculatus (cornichão é uma forrageira comercialmente utilizada na formação de pastagens hibernais em regiões subtropicais e temperadas. Para ambas as espécies, no entanto, são limitados os trabalhos científicos relacionados ao padrão de nodulação e à fixação biológica de nitrogênio (FBN. Este trabalho foi desenvolvido com o objetivo de analisar tais processos nessas espécies, bem como comparar o seu desenvolvimento morfológico sob diferentes fontes de N: N-mineral (nitrato de amônio 5%, N-simbiótico (inoculação e na ausência dessas fontes (testemunha. O ensaio foi conduzido em casa de vegetação, utilizando-se vasos de Leonard com solução nutritiva; o substrato constou de uma mistura de areia + vermiculita + carvão. O delineamento foi completamente casualizado, com quatro repetições. Ao final de 65 dias, as plantas foram colhidas e avaliadas quanto ao comprimento e volume de raízes, número e peso de nódulos, acúmulo de MS e FBN. A. latifolia destacou-se pelo maior número de nódulos (126/vaso e peso total de nódulos (82,22 mg MS/vaso em relação ao cornichão, com 82 nódulos/vaso e 20,25 mg MS/vaso. A FBN foi mais efetiva em A. latifolia, cujas plantas inoculadas produziram, em média, 37% de MS em relação às plantas supridas com N-mineral; no cornichão esse percentual foi de apenas 15%. A quantidade de N fixado simbioticamente foi de 43,12 mg/vaso em Adesmia e de 9,92 mg N/vaso em cornichão.Adesmia latifolia is a forage legume native from Southern Brazil which is outstanding due to stoloniferous growth habit and for forage production during the cool season. The Lotus corniculatus (birdsfoot trefoil is a forage usually utilized as cool season species in subtropical and temperate regions. For both species, however

  5. Strength of anisotropic wood and synthetic materials. [plywood, laminated wood plastics, glass fiber reinforced plastics, polymeric film, and natural wood (United States)

    Ashkenazi, Y. K.


    The possibility of using general formulas for determining the strength of different anisotropic materials is considered, and theoretical formulas are applied and confirmed by results of tests on various nonmetallic materials. Data are cited on the strength of wood, plywood, laminated wood plastics, fiber glass-reinforced plastics and directed polymer films.

  6. Mo99 Production Plant Layout

    Energy Technology Data Exchange (ETDEWEB)

    Woloshun, Keith Albert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Naranjo, Angela Carol [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    The NorthStar Medical Technologies 99Mo production facility configuration is envisioned to be 8 accelerator pairs irradiating 7 100Mo targets (one spare accelerator pair undergoing maintenance while the other 7 pairs are irradiating targets). The required shielding in every direction for the accelerators is initially estimated to be 10 feet of concrete. With the accelerator pairs on one (ground) level and spaced with the required shielding between adjacent pairs, the only practical path for target insertion and removal while minimizing floor space is vertical. The current scheme then requires a target vertical lift of nominally 10 feet through a shield stack. It is envisioned that the lift will be directly into a hot cell where an activated target can be removed from its holder and a new target attached and lowered. The hot cell is on a rail system so that a single hot cell can service all active target locations, as well as deliver the ready targets to the separations lab. On this rail system, coupled to the hot cell, will be a helium recovery and clean-up system. All helium coolant equipment is located on the upper level near to the target removal point.

  7. Manufacturing methods and magnetic characteristics of magnetic wood

    International Nuclear Information System (INIS)

    Oka, H.; Hojo, A.; Osada, H.; Namizaki, Y.; Taniuchi, H.


    The relationship between wood construction and DC magnetic characteristics for three types of magnetic wood was experimentally investigated. The results show that the magnetic characteristics of each type of magnetic wood are dependent on the magnetic materials, the density of the magnetic material and the construction of the wood. Furthermore, it was determined that the relationship between the fiber direction and the magnetic path direction of the magnetic wood influenced the wood's magnetic characteristics

  8. Social Housing: wood prefabrication techniques

    Directory of Open Access Journals (Sweden)

    Tiziana Ferrante


    Full Text Available Student housing, a particular and quite significant part of social housing, and innovation in processing and production of industrial building components made of a material (wood not adequately inquired: two fields of research that have been explored for a long time allowing here to share and compare experiences gained thus far. By a selection of samples of wooden student housing in Europe we have documented the performances of this material and we have underlined, at the same time, through what happens abroad, the need of an organic national social housing plan that can meet an unsatisfied demand and boost the construction industry during this particular stage of economic crisis.

  9. Gascoigne Wood - eagle or albatross?

    Energy Technology Data Exchange (ETDEWEB)

    Hoy, H.D.; Lowery, P.A. [RJB Mining (United Kingdom) Limited (United Kingdom). Gascoigne Wood Mine


    This paper reviews the history of Gascoigne Wood coal receiving and dispatch centre from conception through to the present. The design and development of the infrastructure is described with particular reference to the spine tunnels, major engineering installations and the system modifications undertaken to maintain a marketable product. Performance parameters are examined and a comparison made of the attributable and surface costs of a Selby Complex Mine with a similar size individual colliery. Finally, the changes envisaged in the future are discussed. 10 figs., 4 tabs.

  10. Preparation and characterization of waste wood post- industrial plastic reinforced with wood powder waste


    Wallace Fernando Pedrosa de Paula; Luciana Portal da Silva


    The aim of this study is to assess the feasibility of production of composite plastic with wood waste and wood powder with improved properties.Post-industrial waste to be used as base High Density Polyethylene (HDPE) as used plastic wood, called plastic wood waste (RMP) were benefited and mixed with wood dust residues (RPM). The mixtures were prepared with different percentages (by mass) RPM (0, 10, 20, 30 and 40%) in the twin-screw extruder model TeckTrill DCT 40, with L/D: 40 and ten temper...

  11. Effect of Wood Fillers on the Viscoelastic and Thermophysical Properties of HDPE-Wood Composite

    Directory of Open Access Journals (Sweden)

    M. Tazi


    Full Text Available Wood polymer composites (WPC have well proven their applicability in several fields of the plasturgy sector, due to their aesthetics and low maintenance costs. However, for plasturgy applications, the characterization of viscoelastic behavior and thermomechanical and thermophysical properties of WPC with the temperature and wood filler contents is essential. Therefore, the processability of polymer composites made up with different percentage of wood particles needs a better understanding of materials behaviors in accordance with temperature and wood particles contents. To this end, a numerical analysis of the viscoelastic, mechanical, and thermophysical properties of composite composed of high density polyethylene (HDPE reinforced with soft wood particles is evaluated.

  12. Structural Evaluation Procedures for Heavy Wood Truss Structures

    National Research Council Canada - National Science Library

    Issa, Mohsen


    .... An evaluation procedure for wood structures differs from conventional methods used in steel, concrete, and masonry structures because, in wood construction, the allowable stresses used in design...

  13. Edge termination of MoS2 and CoMoS catalyst particles

    DEFF Research Database (Denmark)

    Byskov, Line Sjolte; Nørskov, Jens Kehlet; Clausen, B. S.


    The edge termination of MoS2 and CoMoS catalyst particles is studied by density functional calculations. We show that for structures without vacancies Mo-terminated edges have the lowest edge energies. Creation of vacancies, which are believed to be active sites in these catalyst systems, leads...

  14. On the reduction of orthorhombic MoO3 to MoO2

    International Nuclear Information System (INIS)

    Delannay, F.


    Electron diffraction shows evidence of topotactic orientation relationships between the original MoO 3 crystal and MoO 2 crystals formed under mild reduction conditions. These relationships differ from previously published literature data. A possible mechanism of formation of the [100] strings of edge sharing octahedra in the MoO 2 structure is tentatively proposed. (author)

  15. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour

    Directory of Open Access Journals (Sweden)

    A.A. Enayati


    Full Text Available Hemicellulose of Southern Yellow Pine wood spices was extracted by pressurized hot water at three different temperatures: 140°C, 155°C and 170°C. Compounding with PP (polypropylene was performed by extrusion after preparing wood flour and sieving to determine its mesh size. The ratio of wood to polymer was 50:50 based on oven-dry weight of wood flour. All extraction treatments and control samples were compounded under two sets of conditions, without and with 2% MAPP as coupling agent. Injection molding was used to make tensile test samples (dogbone from the pellets made by extrusion. Thermal properties of wood-plastic composites were studied by TGA and DSC while the thermal stability of pretreated wood flours, PP and MAPP were studied by TGA as well. The greater weight loss of wood materials was an indication that higher treatment temperature increases the extractability of hemicellulose. The removal of hemicellulose by extraction improves thermal stability of wood flour, especially for extraction at 170°C. Wood-plastic composites made from extracted fibers at 170°C showed the highest thermal stability. Coupling agent did not have a significant effect on thermal stability but it improved the degree of crystallinity of the composites.Surface roughness of wood fiber increased after treatment. Extraction of hemicellulose increased the degree of crystallinity but it was not significant except for samples from treated wood flour at 170°C and with MAPP.

  16. Bacteria in decomposing wood and their interactions with wood-decay fungi. (United States)

    Johnston, Sarah R; Boddy, Lynne; Weightman, Andrew J


    The fungal community within dead wood has received considerable study, but far less attention has been paid to bacteria in the same habitat. Bacteria have long been known to inhabit decomposing wood, but much remains underexplored about their identity and ecology. Bacteria within the dead wood environment must interact with wood-decay fungi, but again, very little is known about the form this takes; there are indications of both antagonistic and beneficial interactions within this fungal microbiome. Fungi are hypothesised to play an important role in shaping bacterial communities in wood, and conversely, bacteria may affect wood-decay fungi in a variety of ways. This minireview considers what is currently known about bacteria in wood and their interactions with fungi, and proposes possible associations based on examples from other habitats. It aims to identify key knowledge gaps and pressing questions for future research. © FEMS 2016. All rights reserved. For permissions, please e-mail:

  17. Relationship between ecological indicators and teak wood ...

    African Journals Online (AJOL)

    Relationship between ecological indicators and teak wood characteristics in Tchorogo plantation (Togo) ... International Journal of Biological and Chemical Sciences ... Results showed that teak productivity level, which is linked to the fibre properties of teak wood varied significantly (F749,2=71.81; P<0.001 for fibre length; ...

  18. Analysis of acetylated wood by electron microscopy

    NARCIS (Netherlands)

    Sander, C.; Beckers, E.P.J.; Militz, H.; Veenendaal, van W.


    The properties of acetylated solid wood were investigated earlier, in particular the anti-shrink efficiency and the resistance against decay. This study focuses on the possible changes and damage to the wood structure due to an acetylation process leading to weight per cent gains of up to 20%.

  19. Chapter 13:Wood/Nonwood Thermoplastic Composites (United States)

    Craig M. Clemons; Roger M. Rowell; David Plackett; B. Kristoffer Segerholm


    Composites made from wood, other biomass resources and polymers have existed for a long time but the nature of many of these composites has changed in recent decades. Wood-thermoset composites date to the early 1900s. "Thermosets" or thermosetting polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins such as epoxies...

  20. Potential for Biobased Adhesives in Wood Bonding (United States)

    Charles R. Frihart


    There has been a resurgence of interest and research on using bio-based materials as wood adhesives; however, they have achieved only limited market acceptance. To better understand this low level of replacement, it is important to understand why adhesives work or fail in moisture durability tests. A holistic model for wood adhesives has been developed that clarifies...

  1. Wood mimetic hydrogel beads for enzyme immobilization. (United States)

    Park, Saerom; Kim, Sung Hee; Won, Keehoon; Choi, Joon Weon; Kim, Yong Hwan; Kim, Hyung Joo; Yang, Yung-Hun; Lee, Sang Hyun


    Wood component-based composite hydrogels have potential applications in biomedical fields owing to their low cost, biodegradability, and biocompatibility. The controllable properties of wood mimetic composites containing three major wood components are useful for enzyme immobilization. Here, lipase from Candida rugosa was entrapped in wood mimetic beads containing cellulose, xylan, and lignin by dissolving wood components with lipase in [Emim][Ac], followed by reconstitution. Lipase entrapped in cellulose/xylan/lignin beads in a 5:3:2 ratio showed the highest activity; this ratio is very similar to that in natural wood. The lipase entrapped in various wood mimetic beads showed increased thermal and pH stability. The half-life times of lipase entrapped in cellulose/alkali lignin hydrogel were 31- and 82-times higher than those of free lipase during incubation under denaturing conditions of high temperature and low pH, respectively. Owing to their biocompatibility, biodegradability, and controllable properties, wood mimetic hydrogel beads can be used to immobilize various enzymes for applications in the biomedical, bioelectronic, and biocatalytic fields. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Micromechanical measurement of wood substructure properties. (United States)

    David E. Kretschmann; Troy W. Schmidt; Roderic S. Lakes; Steven M. Cramer


    The annual rings of softwoods are visually obvious and represent cylindrical layers of primarily cellulosic material that possess significantly different properties. For simplicity, wood construction products are designed assuming a material homogeneity that does not exist. As rapidly grown plantation trees are used for wood products, fewer rings are contained in an...

  3. Wood properties from roundwood to timber engineering

    NARCIS (Netherlands)

    van de Kuilen, J.W.G.; Eberhardsteiner, J.; Winter, W.; Fadai, A.; Pöll, M.


    Measuring and assessing wood properties during the production chain is getting more and more important for an optimal use of the resource. Over the years, research has been performed with the focus on establishing important wood properties, with the final goal of an

  4. Use of nanofillers in wood coatings

    DEFF Research Database (Denmark)

    Nikolic, Miroslav; Lawther, John Mark; Sanadi, Anand Ramesh


    Wood has been used for thousands of years and remains an important material in the construction industry, most often protected with coatings. Development of nanotechnology allows further improvements or new performance properties to be achieved in wood coatings. Increased UV protection...

  5. The market for wood picnic structures. (United States)

    Jerry A. Sesco


    Most of the picnic structures in six north-central states studied were constructed of wood. Service life of structure varied greatly. Vandalism and decay were the major reasons for repairing and replacing picnic tables. More than half the tables were made by the recreation agencies themselves. These results describe a market that existing and potential wood...

  6. Wood decay and the cleanup crew (United States)

    Kevin T. Smith; Jessie A. Glaeser


    Arborists are encouraged to recognize the wood-decay process as an important factor in tree health and public safety. Technical experts who develop training materials to recognize wood-decay processes in living trees are frequently forest pathologists. Much of the history of forest pathology was to support production of sound, high-quality timber. That heritage is...

  7. Wood as a sustainable building material (United States)

    Robert H. Falk


    Few building materials possess the environmental benefits of wood. It is not only our most widely used building material but also one with characteristics that make it suitable for a wide range of applications. As described in the many chapters of this handbook, efficient, durable, and useful wood products produced from trees can range from a minimally processed log at...

  8. Successful approaches to recycling urban wood waste (United States)

    Solid Waste Association of North America


    This report presents eight case studies of successful urban wood waste recycling projects and businesses. These studies document the success of recovered products such as lumber and lumber products, mulch, boiler fuel, and alternative cover for landfills. Overall, wood waste accounts for about 17% of the total waste received at municipal solid waste landfills in the...

  9. Factors influencing wood mobilization in streams (United States)

    Merten, Eric; Finlay, Jacques; Johnson, Lucinda; Newman, Raymond; Stefan, Heinz; Vondracek, Bruce


    Natural pieces of wood provide a variety of ecosystem functions in streams including habitat, organic matter retention, increased hyporheic exchange and transient storage, and enhanced hydraulic and geomorphic heterogeneity. Wood mobilization is a critical process in determining the residence time of wood. We documented the characteristics and locations of 865 natural wood pieces (>0.05 m in diameter for a portion >1 m in length) in nine streams along the north shore of Lake Superior in Minnesota. We determined the locations of the pieces again after an overbank stormflow event to determine the factors that influenced mobilization of stationary wood pieces in natural streams. Seven of 11 potential predictor variables were identified with multiple logistic regression as significant to mobilization: burial, effective depth, ratio of piece length to effective stream width (length ratio), bracing, rootwad presence, downstream force ratio, and draft ratio. The final model (P r2 = 0.39) indicated that wood mobilization under natural conditions is a complex function of both mechanical factors (burial, length ratio, bracing, rootwad presence, draft ratio) and hydraulic factors (effective depth, downstream force ratio). If stable pieces are a goal for stream management then features such as partial burial, low effective depth, high length relative to channel width, bracing against other objects (e.g., stream banks, trees, rocks, or larger wood pieces), and rootwads are desirable. Using the model equation from this study, stewards of natural resources can better manage in-stream wood for the benefit of stream ecosystems.

  10. Wood energy markets, 2011-2012 (United States)

    Francisco Aguilar; Rens Hartkamp; Warren Mabee; Kenneth Skog


    To celebrate the 2012 International Year of Sustainable Energy for All, in this chapter we consider in some depth the sustainability of wood energy. To do so, we evaluate the traditional economic, environmental and social dimensions of the sustainability concept. We also address how public policy has influenced wood energy sustainability across the UNECE region.

  11. Chapter 01: Wood identification and pattern recognition (United States)

    Alex Wiedenhoeft


    Wood identification is a combination of art and science. Although the bulk of this manual focuses on the scientific characteristics used to make accurate field identifications of wood, the contribution of the artistic component to the identification process should be neither overlooked nor understated. Though the accumulation of scientific knowledge and experience is...

  12. Bioremediation of treated wood with bacteria (United States)

    Carol A. Clausen


    This chapter reviews prior research in the field of bacterial bioremediation for wood treated with oilborne and inorganic preservatives. Current state of the art is summarized along with potential benefits and pitfalls of a pilot-scale bioremediation process for CCA-treated waste wood.

  13. Radial wood Allocation in Schizolobium Parahyba (United States)

    G. Bruce Williamson; Michael C. Wiemann; James P. Geaghan


    The diversity of tropical trees has captivated botanists for centuries. Woods of difterent species, not only differ in appearance, but also in functional traits-density, porosity and strength-characteristics that relate to various plant functions such as support and conduction. The specific gravity (SG) of wood is a species' trait that integrates mechanical...

  14. WGDB: Wood Gene Database with search interface. (United States)

    Goyal, Neha; Ginwal, H S


    Wood quality can be defined in terms of particular end use with the involvement of several traits. Over the last fifteen years researchers have assessed the wood quality traits in forest trees. The wood quality was categorized as: cell wall biochemical traits, fibre properties include the microfibril angle, density and stiffness in loblolly pine [1]. The user friendly and an open-access database has been developed named Wood Gene Database (WGDB) for describing the wood genes along the information of protein and published research articles. It contains 720 wood genes from species namely Pinus, Deodar, fast growing trees namely Poplar, Eucalyptus. WGDB designed to encompass the majority of publicly accessible genes codes for cellulose, hemicellulose and lignin in tree species which are responsive to wood formation and quality. It is an interactive platform for collecting, managing and searching the specific wood genes; it also enables the data mining relate to the genomic information specifically in Arabidopsis thaliana, Populus trichocarpa, Eucalyptus grandis, Pinus taeda, Pinus radiata, Cedrus deodara, Cedrus atlantica. For user convenience, this database is cross linked with public databases namely NCBI, EMBL & Dendrome with the search engine Google for making it more informative and provides bioinformatics tools named BLAST,COBALT. The database is freely available on

  15. Wood Variety Recognition on Mobile Devices

    Czech Academy of Sciences Publication Activity Database

    Vácha, Pavel; Haindl, Michal


    Roč. 2013, č. 93 (2013), s. 52-52 ISSN 0926-4981 R&D Projects: GA ČR GA102/08/0593 Institutional support: RVO:67985556 Keywords : wood recognition * Markov random fields Subject RIV: BD - Theory of Information http:// library variety recognition on mobile devices.pdf

  16. Wood decomposition as influenced by invertebrates (United States)

    Michael D. Ulyshen


    The diversity and habitat requirements of invertebrates associated with dead wood have been the subjects of hundreds of studies in recent years but we still know very little about the ecological or economic importance of these organisms. The purpose of this review is to examine whether, how and to what extent invertebrates affect wood decomposition in terrestrial...

  17. Factors influencing wood mobilization in Minnesota streams (United States)

    Merten, Eric; Finlay, Jacques; Johnson, Lucinda; Newman, Raymond; Stefan, Heinz; Vondracek, Bruce C.


    Natural pieces of wood provide a variety of ecosystem functions in streams including habitat, organic matter retention, increased hyporheic exchange and transient storage, and enhanced hydraulic and geomorphic heterogeneity. Wood mobilization is a critical process in determining the residence time of wood. We documented the characteristics and locations of 865 natural wood pieces (>0.05 m in diameter for a portion >1 m in length) in nine streams along the north shore of Lake Superior in Minnesota. We determined the locations of the pieces again after an overbank stormflow event to determine the factors that influenced mobilization of stationary wood pieces in natural streams. Seven of 11 potential predictor variables were identified with multiple logistic regression as significant to mobilization: burial, effective depth, ratio of piece length to effective stream width (length ratio), bracing, rootwad presence, downstream force ratio, and draft ratio. The final model (P< 0.001, r2 = 0.39) indicated that wood mobilization under natural conditions is a complex function of both mechanical factors (burial, length ratio, bracing, rootwad presence, draft ratio) and hydraulic factors (effective depth, downstream force ratio). If stable pieces are a goal for stream management then features such as partial burial, low effective depth, high length relative to channel width, bracing against other objects (e.g., stream banks, trees, rocks, or larger wood pieces), and rootwads are desirable. Using the model equation from this study, stewards of natural resources can better manage in-stream wood for the benefit of stream ecosystems.

  18. Kraft pulping of industrial wood waste (United States)

    Aziz. Ahmed; Masood. Akhtar; Gary C. Myers; Gary M. Scott


    Most of the approximately 25 to 30 million tons of industrial wood waste generated in the United States per year is burned for energy and/or landfilled. In this study, kraft pulp from industrial wood waste was evaluated and compared with softwood (loblolly pine, Douglas-fir) and hardwood (aspen) pulp. Pulp bleachability was also evaluated. Compared to loblolly pine...

  19. Environmental education on wood preservatives and preservative ...

    African Journals Online (AJOL)

    Forest products specialists are often asked about the perceived risks and environmental costs of treated wood products. Evidently, the civil society is ignorant of the fact that preservative treated wood products (PTWP) are not as lethal as pesticides. In this paper, a careful review is made of the environmental and health ...


    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  1. Waste-wood-derived fillers for plastics (United States)

    Brent English; Craig M. Clemons; Nicole Stark; James P. Schneider


    Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper...

  2. Finishability of CCA pressure-treated wood (United States)

    Alan Ross; Richard Carlson; William Feist; Steven Bussjaeger


    Thus, a need arose for the development of surface finishes for CCA-treated wood that could address the special requirements of this substrate and provide protection against the ravages of water, sunlight, mildew, and other aspects of weathering and wear. Initially, this need was not addressed, most wood preserving companies had little expertise in surface finishes and...

  3. Wood products research in the USA (United States)

    Theodore Wegner


    Forest biomass conversion to biofuels and other value-added co-products; hyper-performance advanced composites custom tailored to end use requirements; advanced high performance wood-based structures; and nanomaterials and nano-enable high performance products from wood represent important research and development investment areas for the successful transformation of...

  4. Systematic wood anatomy of the Rosaceae

    NARCIS (Netherlands)

    Zhang, Shu-Yin


    The wood anatomy of the Rosaceae is surveyed and analysed, based on the study of 280 species (c. 500 specimens) belonging to 62 genera from different parts of the world. Eighteen wood anatomical characters have been used for a phenetic and phylogenetic classification. In the phenetic classification,

  5. Least cost supply strategies for wood chips

    DEFF Research Database (Denmark)

    Möller, Bernd

    The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark.......The abstract presents a study based on a geographical information system, which produce  cost-supply curves by location for forest woods chips in Denmark....

  6. Reactivity and burnout of wood fuels

    DEFF Research Database (Denmark)

    Dall'Ora, Michelangelo

    This thesis deals with the combustion of wood in pulverised fuel power plants. In this type of boiler, the slowest step in the wood conversion process is char combustion, which is one of the factors that not only determine the degree of fuel burnout, but also affect the heat release profile...

  7. Business environment in the wood fuels field

    International Nuclear Information System (INIS)

    Laitinen, H.; Ranta, T.


    In this publication the business environment in the wood fuels sector and the internal and external factors affecting it are studied. It has been considered important to describe both the present situation and future possibilities of the business in order to develop it so that the planned increase in the use of wood fuels can be achieved

  8. Chapter 16: Soy Proteins as Wood Adhesives (United States)

    Charles R. Frihart; Christopher G. Hunt; Michael J. Birkeland


    Protein adhesives allowed the development of bonded wood products such as plywood and glulam in the early 20th century. Petrochemical-based adhesives replaced proteins in most wood bonding applications because of lower cost, improved production efficiencies, and enhanced durability. However, several technological and environmental factors have led to a resurgence of...

  9. Scarcity on the market for wood wastes

    International Nuclear Information System (INIS)

    De Boer, A.


    An overview is given of the market for wood wastes in the Netherlands and how this affects the targets to use biomass. Several types of biomass must be imported, not only wood wastes, but also e.g. olive stones and cacao shells [nl

  10. Ammonia treated Mo/AC catalysts for CO hydrogenation with ...

    Indian Academy of Sciences (India)


    K-Ni-Mo catalyst. The interaction of activated carbon with the Ni-Mo species prevents the complete reduc- tion of the active metals (Ni0 and Mo0 lead to methane formation) and preserves partially oxidized Mo and Ni species, which are thought to be active sites for alcohol formation.14 Zhang et al.,15 synthesized Ni-Mo-K ...

  11. Physiological Effects of Touching Wood

    Directory of Open Access Journals (Sweden)

    Harumi Ikei


    Full Text Available This study aimed to clarify the physiological effects of touching wood with the palm, in comparison with touching other materials on brain activity and autonomic nervous activity. Eighteen female university students (mean age, 21.7  ±  1.6 years participated in the study. As an indicator of brain activity, oxyhemoglobin (oxy-Hb concentrations were measured in the left/right prefrontal cortex using near-infrared time-resolved spectroscopy. Heart rate variability (HRV was used as an indicator of autonomic nervous activity. The high-frequency (HF component of HRV, which reflected parasympathetic nervous activity, and the low-frequency (LF/HF ratio, which reflected sympathetic nervous activity, were measured. Plates of uncoated white oak, marble, tile, and stainless steel were used as tactile stimuli. After sitting at rest with their eyes closed, participants touched the materials for 90 s. As a result, tactile stimulation with white oak significantly (1 decreased the oxy-Hb concentration in the left/right prefrontal cortex relative to marble, tile, and stainless steel and (2 increased ln(HF-reflected parasympathetic nervous activity relative to marble and stainless steel. In conclusion, our study revealed that touching wood with the palm calms prefrontal cortex activity and induces parasympathetic nervous activity more than other materials, thereby inducing physiological relaxation.

  12. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL


    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  13. Wood for energy production. Technology - environment - economy

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others


    `Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

  14. Mineralogy of Non-Silicified Fossil Wood

    Directory of Open Access Journals (Sweden)

    George E. Mustoe


    Full Text Available The best-known and most-studied petrified wood specimens are those that are mineralized with polymorphs of silica: opal-A, opal-C, chalcedony, and quartz. Less familiar are fossil woods preserved with non-silica minerals. This report reviews discoveries of woods mineralized with calcium carbonate, calcium phosphate, various iron and copper minerals, manganese oxide, fluorite, barite, natrolite, and smectite clay. Regardless of composition, the processes of mineralization involve the same factors: availability of dissolved elements, pH, Eh, and burial temperature. Permeability of the wood and anatomical features also plays important roles in determining mineralization. When precipitation occurs in several episodes, fossil wood may have complex mineralogy.

  15. Alaska Wood Biomass Energy Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Bolling


    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  16. Wood for energy production. Technology - environment - economy

    International Nuclear Information System (INIS)

    Serup, H.; Falster, H.; Gamborg, C.


    'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

  17. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others


    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production

  18. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others


    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production.

  19. Solution chemistry of Mo(III) and Mo(IV): Thermodynamic foundation for modeling localized corrosion

    International Nuclear Information System (INIS)

    Wang Peiming; Wilson, Leslie L.; Wesolowski, David J.; Rosenqvist, Joergen; Anderko, Andrzej


    To investigate the behavior of molybdenum dissolution products in systems that approximate localized corrosion environments, solubility of Mo(III) in equilibrium with solid MoO 2 has been determined at 80 deg. C as a function of solution acidity, chloride concentration and partial pressure of hydrogen. The measurements indicate a strong increase in solubility with acidity and chloride concentration and a weak effect of hydrogen partial pressure. The obtained results have been combined with literature data for systems containing Mo(III), Mo(IV), and Mo(VI) in solutions to develop a comprehensive thermodynamic model of aqueous molybdenum chemistry. The model is based on a previously developed framework for simulating the properties of electrolyte systems ranging from infinite dilution to solid saturation or fused salt limit. To reproduce the measurements, the model assumes the presence of a chloride complex of Mo(III) (i.e., MoCl 2+ ) and hydrolyzed species (MoOH 2+ , Mo(OH) 2 + , and Mo(OH) 3 0 ) in addition to the Mo 3+ ion. The model generally reproduces the experimental data within experimental scattering and provides a tool for predicting the phase behavior and speciation in complex, concentrated aqueous solutions. Thus, it provides a foundation for simulating the behavior of molybdenum species in localized corrosion environments.

  20. How spectroscopy and microspectroscopy of degraded wood contribute to understand fungal wood decay. (United States)

    Fackler, Karin; Schwanninger, Manfred


    Nuclear magnetic resonance, mid and near infrared, and ultra violet (UV) spectra of wood contain information on its chemistry and composition. When solid wood samples are analysed, information on the molecular structure of the lignocellulose complex of wood e.g. crystallinity of polysaccharides and the orientation of the polymers in wood cell walls can also be gained. UV and infrared spectroscopy allow also for spatially resolved spectroscopy, and state-of-the-art mapping and imaging systems have been able to provide local information on wood chemistry and structure at the level of wood cells (with IR) or cell wall layers (with UV). During the last decades, these methods have also proven useful to follow alterations of the composition, chemistry and physics of the substrate wood after fungi had grown on it as well as changes of the interactions between the wood polymers within the lignocellulose complex caused by decay fungi. This review provides an overview on how molecular spectroscopic methods could contribute to understand these degradation processes and were able to characterise and localise fungal wood decay in its various stages starting from the incipient and early ones even if the major share of research focussed on advanced decay. Practical issues such as requirements in terms of sample preparation and sample form and present examples of optimised data analysis will also be addressed to be able to detect and characterise the generally highly variable microbial degradation processes within their highly variable substrate wood.

  1. Properties of Wood Fibre-Polypropylene Composites: Effect of Wood Fibre Source (United States)

    Butylina, Svetlana; Martikka, Ossi; Kärki, Timo


    This study examined the effect of type of wood fibre source on the physical and mechanical properties of wood fibre-polypropylene composites. Wood flour, fibres of heat-treated wood and pellets were used as sources of wood fibres in the manufacturing process. All studied wood fibre-polypropylene composites were made from 75% wood, 22% recycled polypropylene (PP) and 3% maleated polypropylene (MAPP). Wood fibre-polypropylene composites were compounded in a conical twin-screw extruder. Water absorption and thickness swelling were studied. Mechanical properties of the composites were characterised by tensile, flexural, and impact testing. Micromechanical deformation processes were investigated using scanning electron microscopy done on the fractured surfaces of broken samples. The durability of composites exposed to three accelerated cycles of water immersion, freezing and thawing was examined. The results showed that the density of the composites was a key factor governing water absorption and thickness swelling. A significant improvement in tensile strength, flexural strength, and Charpy impact strength was observed for composites reinforced with heat-treated fibre compared to composites reinforced with pellets and especially to wood flour reinforced composites. The flexural strength and dimensional stability performance reduced after exposure to freeze-thaw cycling for all composites, but the degree of these changes was dependent on the wood fibre source.

  2. Preparation of MoSex>3/Mo-NPs catalytic films for enhanced hydrogen evolution by pulsed laser ablation of MoSe2 target (United States)

    Fominski, V. Yu.; Romanov, R. I.; Fominski, D. V.; Shelyakov, A. V.


    The peculiarities of pulsed laser ablation of MoSe2 targets which caused the formation of a complex plume containing atoms (Mo and Se) and Mo nanoparticles (Mo-NPs) have been studied. Investigations of the composition, structure, and catalytic activity toward the hydrogen evolution reaction (HER) for MoSex/Mo-NPs films prepared by pulsed laser deposition (PLD) in a vacuum and in a buffer He gas were carried out. For He pressure of 30 Pa, a shock wave could be the dominant mechanism of material transport, resulting in the deposition of an Se-enriched flux of chemically active atoms and leading to the growth of amorphous films with an increased Se content. Mo nanoparticles allowed for a larger surface area of the MoSex∼3.1/Mo-NPs catalyst deposited 5 cm from the target. However, for deposition in He at 10 cm, the amount of Mo NPs in the film appreciably decreased. Factors that could impact on the transport of nanoparticles through a buffer gas were considered. The amorphous MoSex∼3.1/Mo-NPs films prepared by PLD in He gas exhibited excellent HER performance. Quasicrystal MoSex<2/Mo-NPs films obtained by vacuum PLD were obviously inferior to amorphous films. Despite the formation of edge-oriented MoSe2 nanocrystals, the vacuum-deposited films had a large majority of metallic Mo and a deficiency of Se, which could adversely affect their HER performance.

  3. Solvolytic liquefaction of wood under mild conditions

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.M.


    Conversion of wood to liquid products requires cleavage of bonds which crosslink the wood structure. This study examines a low-severity wood solubilization process utilizing a solvent medium consisting of a small amount of sulfuric acid and a potentially wood-derivable alcohol. In one half hour of reaction time at 250/sup 0/C under 15 psia starting nitrogen pressure, over 95% of the wood (maf) was rendered acetone-soluble. The product is a soft, black, bitumen-like solid at room temperature but readily softens at 140/sup 0/C. Between 25 and 50% of the original wood oxygen, depending on alcohol used, was removed as water. Approximately 2 to 17% of the alcohols were retained in the product. Gel permeation chromatography showed that the product's median molecular weight is around 300. Based on experimental and literature results, a mechanism for wood solubilization is proposed. This involves protonation of the etheric oxygen atoms, leading to subsequent bond scission to form carbonium ions which are stabilized by solvent alkoxylation. At severe conditions, polymerization and condensation reactions result in acetone-insoluble materials.

  4. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)


    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  5. Wood quality changes caused by mineral fertilization

    Directory of Open Access Journals (Sweden)

    Carlos Roberto Sette Jr


    Full Text Available The diverse and important use of wood from fast growth eucalyptus plantations requires the analysis of the effect of mineral fertilizers on wood quality. The objective of this study was to evaluate the anatomical characteristics and wood density from Eucalyptus grandis trees (3 m x 2 m spacing fertilized with potassium and sodium (at planting, 6 th and 12th month. Fifteen (15 6 years old eucalyptus trees were selected (5 trees/treatment, cut and wood samples at DBH (1,3 m were taken for anatomical characteristics (fiber and vessels and wood density analysis. Results showed that eucalyptus trees treated with mineral fertilizers did not show significant alteration in average wood density, with radial profile model common to all three treatments, characterized by a values increase in the region next to the pith, toward to bark. Mineral fertilization influenced wood anatomical characteristics: treatment with sodium was characterized by thinner walls and lumen larger diameter; in treatment with potassium, larger vessels were detected.

  6. Utilisation of Estonian energy wood resources

    International Nuclear Information System (INIS)

    Muiste, P.; Tullus, H.; Uri, V.


    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs

  7. Characteristics of MoSe{sub 2} formation during rapid thermal processing of Mo-coated glass

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Soobin; Koo, Jaseok; Kim, Sammi [School of Chemical Engineering, Yeungnam University, Gyeonsan, Gyeongbuk 712-749 (Korea, Republic of); Kim, Soo-Hyun [School of Materials Science and Engineering, Yeungnam University, Gyeonsan, Gyeongbuk 712-749 (Korea, Republic of); Cheon, Taehoon [Daegu Gyeongbuk Institute of Science and Technology, Daegu 711-873 (Korea, Republic of); Oh, Jong Seok; Kim, Suk Jin [AVACO Co., Ltd., Daegu 704-833 (Korea, Republic of); Kim, Woo Kyoung, E-mail: [School of Chemical Engineering, Yeungnam University, Gyeonsan, Gyeongbuk 712-749 (Korea, Republic of)


    Multi-layered Mo, prepared using an in-line sputtering system, was selenized by reaction with Se vapor and thermal annealing of bilayer Mo/Se samples. In situ high-temperature X-ray diffraction analysis indicated that the phase evolution of the glass/Mo/Se sample during heat treatment was similar to that of the selenization of glass/Mo with Se vapor, except for crystallization of Se in the glass/Mo/Se sample. However, the MoSe{sub 2} layer formed from the selenization of the Mo layer by Se vapor preferentially grew perpendicularly to the Mo surface, whereas MoSe{sub 2} formed from the reaction of Mo with Se liquid showed random orientation. The detailed reaction pathways of the double-layer random-MoSe{sub 2}/vertical-MoSe{sub 2} formation from the Mo/Se bilayer sample were suggested on the basis of the several characterization results including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy and selected-area electron diffraction patterns. - Highlights: ► The selenization of glass/Mo and glass/Mo/Se samples was investigated. ► The reaction of the Mo layer with Se vapor produced vertically oriented MoSe{sub 2}. ► Randomly oriented MoSe{sub 2} layer was formed from the reaction of Mo with liquid Se.

  8. Wood-starved and footsore

    International Nuclear Information System (INIS)

    Field, T.


    Nearly half the people on earth soon may find themselves a little colder and a little hungrier as sources of cheap fuel for cooking and heating begin to disappear. Traditional wood-base fuels such as firewood and charcoal are becoming scarce as populations increase and forest land is converted to other uses. For more than 100 million people, this shortage has reached crisis proportions. In just seven years the world population, now estimated at 5.5 billion, is expected to exceed 6.25 billion. Almost half-including nearly 600 million urban dwellers-may not have enough fuel to heat their homes and feed their families. By 2025, when the world population could reach 10 billion, finding fuel supplies that are reliable and inexpensive will be both a rural and an urban problem. Solutions are being explored in several areas, based on more efficient and more effective tree planting and more energy efficient technologies

  9. AMORE Mo-99 Spike Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Youker, Amanda J. [Argonne National Lab. (ANL), Argonne, IL (United States); Krebs, John F. [Argonne National Lab. (ANL), Argonne, IL (United States); Quigley, Kevin J. [Argonne National Lab. (ANL), Argonne, IL (United States); Byrnes, James P. [Argonne National Lab. (ANL), Argonne, IL (United States); Rotsch, David A [Argonne National Lab. (ANL), Argonne, IL (United States); Brossard, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); Wesolowski, Kenneth [Argonne National Lab. (ANL), Argonne, IL (United States); Alford, Kurt [Argonne National Lab. (ANL), Argonne, IL (United States); Chemerisov, Sergey [Argonne National Lab. (ANL), Argonne, IL (United States); Vandegrift, George F. [Argonne National Lab. (ANL), Argonne, IL (United States)


    With funding from the National Nuclear Security Administrations Material Management and Minimization Office, Argonne National Laboratory (Argonne) is providing technical assistance to help accelerate the U.S. production of Mo-99 using a non-highly enriched uranium (non-HEU) source. A potential Mo-99 production pathway is by accelerator-initiated fissioning in a subcritical uranyl sulfate solution containing low enriched uranium (LEU). As part of the Argonne development effort, we are undertaking the AMORE (Argonne Molybdenum Research Experiment) project, which is essentially a pilot facility for all phases of Mo-99 production, recovery, and purification. Production of Mo-99 and other fission products in the subcritical target solution is initiated by putting an electron beam on a depleted uranium (DU) target; the fast neutrons produced in the DU target are thermalized and lead to fissioning of U-235. At the end of irradiation, Mo is recovered from the target solution and separated from uranium and most of the fission products by using a titania column. The Mo is stripped from the column with an alkaline solution. After acidification of the Mo product solution from the recovery column, the Mo is concentrated (and further purified) in a second titania column. The strip solution from the concentration column is then purified with the LEU Modified Cintichem process. A full description of the process can be found elsewhere [1–3]. The initial commissioning steps for the AMORE project include performing a Mo-99 spike test with pH 1 sulfuric acid in the target vessel without a beam on the target to demonstrate the initial Mo separation-and-recovery process, followed by the concentration column process. All glovebox operations were tested with cold solutions prior to performing the Mo-99 spike tests. Two Mo-99 spike tests with pH 1 sulfuric acid have been performed to date. Figure 1 shows the flow diagram for the remotely operated Mo-recovery system for the AMORE project

  10. Housing and the wood industry, trends & market conditions (United States)

    Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig


    Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

  11. Consumer preference study of characteristics of Hawaiian koa wood bowls (United States)

    Eini C Lowell; Katherine Wilson; Jan Wiedenbeck; Catherine Chan; J. B. Friday; Nicole Evans


    Koa (Acacia koa A. Gray), a species endemic to the Hawaiian Islands, has ecological, cultural, and economic significance. Its wood is prized globally but today, most woodworkers only use koa wood from dead and dying old-growth trees. The general perception of wood from young-growth koa is that it lacks the color and figure of old-growth wood and is...

  12. The vessels in the wood of Javan Mangrove trees

    NARCIS (Netherlands)

    Janssonius, H.H.


    In the course of my study on the wood-anatomy of Javan woods (Mikrographie des Holzes der auf Java vorkommenden Baumarten), I examined also many woods from mangrove-trees. Mangrove has been the subject of much investigation; the community is usually described as xeromorphic. Mangrove woods proved to

  13. Utilization trend of wood species utilized in furniture industry in ...

    African Journals Online (AJOL)

    The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

  14. 49 CFR 178.515 - Standards for reconstituted wood boxes. (United States)


    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for reconstituted wood boxes. 178.515... wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements for reconstituted wood boxes are as follows: (1) The walls of boxes must be made of water...

  15. The compression of wood/thermoplastic fiber mats during consolidation (United States)

    Karl R. Englund; Michael P. Wolcott; John C. Hermanson


    Secondary processing of non-woven wood and wood/thermoplastic fiber mats is generally performed using compression molding, where heated platens or dies form the final product. Although the study and use of wood-fiber composites is widespread, few research efforts have explicitly described the fundamentals of mat consolidation. In contrast, the wood composite literature...

  16. Achieving wood energy potentials: evidence in northeastern Minnesota. (United States)

    Dennis P. Bradley; David C. Lothner


    A study of wood energy potential in northeastern Minnesota concludes that (1) the forests of the region could support a much larger wood energy harvest without significant cost increases for other forest products; (2) existing stands are predominantly overmature and cutting more now will enhance future wood supplies for all users; (3) converting to wood energy could...

  17. The use and market for wood in the electrometallurgical industry (United States)

    Jeffery L. Wartluft; Jeffery L. Wartluft


    Wood residues, particularly large chips, play an important role in the electric smelting of certain ferro-alloys. This is a report on the characteristics and growth potential of the market for wood in the electrometallurgicaI industry, including a brief account of how wood is used in electrometallurgical processes, a discussion of the preferred form of wood used, a...

  18. Finite Element Analysis Of Boron Diffusion In Wood

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl


    The coupled heat and mass transfer equations for air, water and heat transfer are supplemented with a conservation equation for an additional species representing the concentration of boron in wood. Boundary conditions for wood-air. wood-soil and wood-boron interfaces arc discussed and finally...

  19. Methods for Mitigating the Environmental Risks Associated with Wood Preservatives (United States)

    Dennis Hayward; Stan T. Lebow; Kenneth M. Brooks


    As noted in earlier chapters, the treatment of wood is both art and science. Wood is a variable material; treatment results tend to vary with the preservative and wood species and even within boards of the same species. This means that treated wood often contains a range of preservative retentions. Some pieces will have less than the desired retention, while others may...

  20. Raman spectroscopic characterization of wood and pulp fibers (United States)

    Umesh Prasad Agarwal


    This chapter reviews applications of Raman spectroscopy in the field of wood and pulp fibers. Most of the literature examined was published between 1998 and 2006. In addition to introduction, this chapter contains sections on wood and components, mechanical pulp, chemical pulp, modified/treated wood, cellulose I crystallinity of wood fibers, and the self-absorption...

  1. Adhesives for Achieving Durable Bonds with Acetylated Wood

    Directory of Open Access Journals (Sweden)

    Charles R. Frihart


    Full Text Available Acetylation of wood imparts moisture durability, decay resistance, and dimensional stability to wood; however, making durable adhesive bonds with acetylated wood can be more difficult than with unmodified wood. The usual explanation is that the acetylated surface has fewer hydroxyl groups, resulting in a harder-to-wet surface and in fewer hydrogen bonds between wood and adhesive. This concept was evaluated using four different adhesives (resorcinol–formaldehyde, emulsion polymer isocyanate, epoxy, and melamine–formaldehyde with unmodified wood, acetylated wood, and acetylated wood that had been planed. Strikingly, acetylation did not hinder adhesive bonds with a waterborne resorcinol–formaldehyde adhesive that bonded equally well to both unmodified and acetylated yellow poplar. An epoxy adhesive bonded better to the acetylated wood than to the unmodified wood, in contrast to an emulsion polymer isocyanate, which gave less durable bonds to acetylated than to unmodified wood. Planing of the acetylated wood surface prior to bonding reduced bond durability for the epoxy adhesive and increased the amount of surface hydroxyl groups, as measured using X-ray photoelectron spectroscopic analysis of the trifluoroacetic anhydride-treated wood. These experiments showed that wood modification is useful in understanding wood-adhesive interactions, in addition to determining how to develop adhesives for acetylated woods.

  2. Factors that lead to failure with wood adhesive bonds (United States)

    Charles R. Frihart; James F. Beecher


    Understanding what makes a good wood adhesive is difficult since the type of adhesive, wood species, bonding process, and resultant products vary considerably. Wood bonds are subjected to a variety of tests that reflect the different product performance criteria in diverse countries. The most common tests involve some type of moisture resistance; both wood and adhesive...

  3. Wood and Other Materials Used to Construct Nonresidential Buildings - Canada (United States)

    David B. McKeever; Joe Elling


    Low-rise nonresidential building construction is an important market in Canada for lumber, engineered wood products, structural wood panels, and nonstructural wood panels. This report examines wood products consumption in 2012 for construction of selected low-rise nonresidential buildings types that have six or fewer stories. Buildings with more than six stories are...

  4. Crane harvesters for systematic wood clearing

    Energy Technology Data Exchange (ETDEWEB)

    Mahler, G.


    Wood harvesting in methodical clearing areas has witnessed developments over the last thirty years that can be described for one thing with 'Shifting from short timber to long timber' and for the other with shifting part of the work to central places. Both approaches to make harvesting of thin wood more efficient have been intensively studied over this period by Grammel. Further, thin wood harvesting has lately gained in importance in terms of operational efficiency because more recent recommendations for forest management have very substantially increased intermediate returns at least temporarily.

  5. Mathematical modelling of wood and briquettes torrefaction

    Energy Technology Data Exchange (ETDEWEB)

    Felfli, Felix Fonseca; Luengo, Carlos Alberto [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Grupo Combustiveis Alternativos; Soler, Pedro Beaton [Universidad de Oriente, Santiago de Cuba (Cuba). Fac. de Ingenieria Mecanica. Centro de Estudios de Eficiencia Energetica; Rocha, Jose Dilcio [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico (NIPE)


    A mathematical model valid for the torrefaction of wood logs and biomass briquettes is presented. The model described both chemical and physical processes, which take place in a moist piece of wood heated at temperatures between 503 and 573 K. Calibration measurements of the temperature profile and mass loss, were performed on dry cylinders of wood samples during torrefaction in an inert atmosphere at 503, 533, and 553 K. The calculated data shows a good agreement with experiments. The model can be a useful tool to estimate projecting and operating parameters for torrefaction furnaces such as minimum time of torrefaction, energy consumption and the mass yield. (author)

  6. Supply of Rubber Wood Log in Malaysia


    Noraida, A. W.; Abdul-Rahim, A. S.


    Issue on shortage of raw material for wood processing solved by discovery of rubber wood log as one of the substitutes the natural log. This paper examines the supply of rubber wood log in Malaysia. We employ ARDL Bound Approach Test and time series data from 1980 to 2010 which represented the whole Malaysia are used to achieve the established objectives. The result shown, in the long run harvested area and wages have 1% and 10% significant level respectively. While in the short run, there wa...

  7. Wood used by Stradivari and Guarneri. (United States)

    Nagyvary, Joseph; DiVerdi, Joseph A; Owen, Noel L; Tolley, H Dennis


    Whether or not the great Italian violin-makers used wood that had been chemically processed in order to preserve it and enhance the instrument's sound quality has long been a contentious issue. Here we use nuclear magnetic resonance and infrared spectroscopy to analyse organic matter in wood taken from antique instruments made by Stradivari and Guarneri del Gesu. Our results indicate that the wood used by the masters could indeed have been chemically treated, a technique that may inspire an approach to violin making that is more chemistry-based.

  8. Environmental assessment of domestic wood heating

    International Nuclear Information System (INIS)

    Labouze, E.; Le Guerin, Y.


    In France, more than 6 million families are concerned with the domestic use of wood energy. The wood energy plan of ADEME aims at encouraging the development of wood energy in three sectors: domestic, collective/tertiary, industrial. In that context, ADEME commissioned BIO Intelligence Service a life cycle assessment of collective and industrial heating in order to give objective environmental information and to analyse the strength and weakness of wood heating. Three scenarios were defined according to the origin of wood: firewood, granules and sawmill chips. The study also proposes a comparison to other heating systems: gas, fuel oil and electricity. The life cycle analysis applied to domestic heating consists in quantifying the environmental impacts of the whole linked steps: extraction of fuel, distribution, final use... Every system under study has been divided according to three main stages: - Extraction of raw materials; - Transport of fuels until the place of storage or distribution; - Use (combustion or upstream production of energy in the case of electricity). The environmental impacts are estimated with the following indicators: - Non renewable primary energy balance sheet; - Global warming potential; - Air acidification potential; - Eutrophication potential; - Emissions of toxic metals in air and in soils. The results show that wood heating have the best energy and global warming balance sheets. For air acidification, the combustion stage is pre-dominant regardless of the energy resource. This is mainly due to nitrogen and sulphur oxides airborne emissions. For wood heating, preparation requires fuel consumption which also contributes significantly to nitrogen oxides emissions. The comparison with conventional energy shows that the wood scenarios are well positioned in relation to fuel and electricity for this indicator. Gas appears to be the best heating option for this indicator. The contribution eutrophication is also due to nitrogen oxides airborne

  9. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others


    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility

  10. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others


    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

  11. Coal and wood fuel for electricity production: An environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.M. [EPON, Zwolle (Netherlands)


    Waste wood from primary wood processing and demolition presents both a problem and a potential. If disposed in landfills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MW{sub e}) where 60 000 tonnes of waste and demolition wood will be used annually. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from an environmental liability to an environmental and economic asset. (author)

  12. Electrical properties and x-ray diffraction of wood and wood plastic composite (WPC)

    Energy Technology Data Exchange (ETDEWEB)

    Khan, M.A.; Idriss Ali, K.M. (Institute of Nuclear Science and Technology, Savar, Dacca (Bangladesh)); Wang, W. (New South Wales Univ., Kensington (Australia))


    Wood plastic composite (WPC) of kadom, simul, mango and debdaro were prepared with two monomers methylmethacrylate (MMA) and butylmethacrylate (BMA) using high energy ionizing radiation. X-ray diffraction and scanning electron microscope (SEM) studies reveal that significant grafting occurred with wood fiber. Electric properties like resistivity and dielectric constant of both wood and WPC were measured under different moisture contents and relative humidities. The resistivities of wood decreased dramatically with increase of moisture content, but those of WPC decreased very slowly with moisture content. The dielectric constant of wood increased significantly with moisture content but no significant difference was observed in the case of WPC within the range of moisture contents studied. The dielectric constants of untreated wood also increased with their densities. (author).

  13. Coal and wood fuel for electricity production: an environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.; Zonneveld, N. [nv EPON, Zwolle (Germany)


    Waste wood from primary wood processing and demolition presents both a problem and potential. If disposed of in land fills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes an unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MWe) where 60,000 tonnes of waste and demolition wood will be used yearly. Special emphasis is given to the processing of the powdered wood fuel. Therefore, most waste and demolition wood can be converted from a environmental liability to an environmental and economic asset.

  14. Electrical properties and X-ray diffraction of wood and wood plastic composite (WPC) (United States)

    Ahmad Khan, Mubarak; Idriss Ali, K. M.; Wang, W.

    Wood plastic composite (WPC) of kadom, simul, mango and debdaro were prepared with two monomers, methylmethacrylate (MMA) and butylmethacrylate (BMA) using high energy ionizing radiation. X-ray diffraction and scanning electron microscope (SEM) studies reveal that significant grafting occurred with wood fiber. Electric properties like resistivity and dielectric constant of both wood and WPC were measured under different moisture contents and relative humidities. The resistivities of wood decreased dramatically with increase of moisture content, but those of WPC decreased very slowly with moisture content. The dielectric constant of wood increased significantly with moisture content but no significant difference was observed in the case of WPC within the range of moisture contents studied. The dielectric constants of untreated wood also increased with their densities.

  15. LCA-based optimization of wood utilization under special consideration of a cascading use of wood. (United States)

    Höglmeier, Karin; Steubing, Bernhard; Weber-Blaschke, Gabriele; Richter, Klaus


    Cascading, the use of the same unit of a resource in multiple successional applications, is considered as a viable means to improve the efficiency of resource utilization and to decrease environmental impacts. Wood, as a regrowing but nevertheless limited and increasingly in demand resource, can be used in cascades, thereby increasing the potential efficiency per unit of wood. This study aims to assess the influence of cascading wood utilization on optimizing the overall environmental impact of wood utilization. By combining a material flow model of existing wood applications - both for materials provision and energy production - with an algebraic optimization tool, the effects of the use of wood in cascades can be modelled and quantified based on life cycle impact assessment results for all production processes. To identify the most efficient wood allocation, the effects of a potential substitution of non-wood products were taken into account in a part of the model runs. The considered environmental indicators were global warming potential, particulate matter formation, land occupation and an aggregated single score indicator. We found that optimizing either the overall global warming potential or the value of the single score indicator of the system leads to a simultaneous relative decrease of all other considered environmental impacts. The relative differences between the impacts of the model run with and without the possibility of a cascading use of wood were 7% for global warming potential and the single score indicator, despite cascading only influencing a small part of the overall system, namely wood panel production. Cascading led to savings of up to 14% of the annual primary wood supply of the study area. We conclude that cascading can improve the overall performance of a wood utilization system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse


    Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P/W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (150o and 180oC) and 2) cooking method (atmospheric and sealed). Panels were...

  17. [Suppressive Effects of Extract of Cedar Wood on Heat-induced Expression of Cellular Heat Shock Protein]. (United States)

    Miyakoshi, Junji; Matsubara, Eri; Narita, Eijiro; Koyama, Shin; Shimizu, Yoko; Kawai, Shuichi


     In recent years, highly antimicrobial properties of cedar heartwood essential oil against the wood-rotting fungi and pathogenic fungi have been reported in several papers. Antimicrobial properties against oral bacteria by hinokitiol contained in Thujopsis have been also extensively studied. The relation of naturally derived components and human immune system has been studied in some previous papers. In the present study, we focused on Japanese cedar, which has the widest artificial afforestation site in the country among various tree species. Extract oil was obtained from mixture of sapwood and heartwood of about 40-year cedar grown in Oguni, Kumamoto, Japan. We examined the influence of extract components from Japanese cedar woods on the expression of heat shock protein 70 (Hsp70) during heating, and on the micronucleus formation induced by the treatment of bleomycin as a DNA damaging agent. Cell lines used in this study were human fetal glial cells (SVGp12) and human glioma cells (MO54). Remarkable suppression of the Hsp70 expression induced by heating at 43°C was detected by the treatment of cedar extract in both SVGp12 and MO54 cells. We also found that cedar extract had an inhibitory tendency to reduce the micronucleus formation induced by bleomycin. From these results, the extract components from Japanese cedar woods would have an inhibitory effect of the stress response as a suppression of the heat-induced Hsp70 expression, and might have a reductive effect on carcinogenicity.

  18. Continued growth expected for wood energy despite turbulence of the economic crisis : wood energy markets, 2008-2009 (United States)

    Rens Hartkamp; Bengt Hillring; Warren Mabee; Olle Olsson; Kenneth Skog; Henry Spelter; Johan Vinterback; Antje Wahl


    The economic crisis has not reduced the demand for wood energy, which is expected to continue to grow. The downturn in sawmill production caused a shortage of raw material supply for wood pellet producers. With decreased demand for pulpwood-quality roundwood for wood and paper products in 2009, some pulpwood is being converted into wood energy. Economies of scale are...

  19. Juvenile wood effect in red alder : analysis of physical and mechanical data to delineate juvenile and mature wood zones (United States)

    Joel W. Evans; John F. Senft; David W. Green


    The objective of this study was to investigate the influence of juvenile wood on the mechanical and physical properties of red alder. Tree growth in the first 10 to 20 years, usually referred to as juvenile wood, often influences wood quality by adversely affecting mechanical strength properties. Strength can be reduced up to 50 percent by the presence of juvenile wood...

  20. The economic potential of wood pellet production from alternative, low-value wood sources in the southeast of the US

    NARCIS (Netherlands)

    Hoefnagels, Ric; Junginger, Martin; Faaij, Andre


    The global demand for wood pellets used for energy purposes is growing. Therefore, increased amounts of wood pellets are produced from primary forestry products, such as pulp wood. The present analysis demonstrates that substantial amounts of alternative, low-value wood resources are available that

  1. Effect of chipping on emergence of the redbay ambrosia beetle (Coleoptera: Curculionidae: Scolytinae) and recovery of the laurel wilt pathogen from infested wood chips. (United States)

    Spence, D J; Smith, J A; Ploetz, R; Hulcr, J; Stelinski, L L


    Significant mortality ofredbay trees (Persea borbonia (L.) Spreng.) in the southeastern United States has been caused by Raffaelea lauricola, T.C. Harr., Fraedrich, & Aghayeva (Harrington et al. 2008), a fungal symbiont of the exotic redbay ambrosia beetle, Xyleborus glabratus, Eichhoff (Fraedrich et al. 2008). This pathogen causes laurel wilt, which is an irreversible disease that can kill mature trees within a few weeks in summer. R. lauricola has been shown to be lethal to most native species of Lauraceae and cultivated avocado (Persea americana Mill.) in the southeastern United States. In this study, we examined the survival of X. glabratus and R. lauricola in wood chips made from infested trees by using a standard tree chipper over a 10-wk period. After 2 wk, 14 X. glabratus were recovered from wood chips, whereas 339 X. glabratus emerged from nonchipped bolts. R. lauricola was not found 2 d postchipping from wood chips, indicating that the pathogen is not likely to survive for long inside wood chips. In contrast, R. lauricola persisted in dead, standing redbay trees for 14 mo. With large volumes of wood, the potential for infested logs to be moved between states or across U.S. borders is significant. Results demonstrated that chipping wood from laurel wilt-killed trees can significantly reduce the number of X. glabratus and limit the persistence of R. lauricola, which is important for sanitation strategies aimed at limiting the spread of this disease.

  2. On-line automatic detection of wood pellets in pneumatically conveyed wood dust flow (United States)

    Sun, Duo; Yan, Yong; Carter, Robert M.; Gao, Lingjun; Qian, Xiangchen; Lu, Gang


    This paper presents a piezoelectric transducer based system for on-line automatic detection of wood pellets in wood dust flow in pneumatic conveying pipelines. The piezoelectric transducer senses non-intrusively the collisions between wood pellets and the pipe wall. Wavelet-based denoising is adopted to eliminate environmental noise and recover the collision events. Then the wood pellets are identified by sliding a time window through the denoised signal with a suitable threshold. Experiments were carried out on a laboratory test rig and on an industrial pneumatic conveying pipeline to assess the effectiveness and operability of the system.

  3. Temporal Trend in Wood Dust Exposure During the Production of Wood Pellets. (United States)

    Eriksson, Kåre; Bryngelsson, Ing-Liss; Hagström, Katja


    Wood dust data collected in the production of wood pellets during 2001 to 2013 were evaluated to study a temporal trend in inhalation exposure. A linear mixed effects model of natural ln-transformed data was used to express the relative annual difference in inhalation wood dust exposure. There was an annual decrease of -20.5% of the geometric mean wood dust exposure during 2001 until 2013. The results were based on 617 inhalable dust samples collected at 14 different production units. The exposure to wood dust at the industrial premises investigated has decreased from a relatively high level of 6.4 mg m-3 in 2001 to 1.0 mg-3 in 2013. The Swedish Occupational Exposure Limit (SOEL) of 2 mg m-3 may still be exceeded. Analysis of the temporal trend in soft wood production units revealed declines in exposure of 20.5% per annum. It is important that precautions are taken to protect workers from a hazardous exposure to wood dust at the premises as the SOEL of 2 mg m-3 at some occasions is still exceeded. Additional measurements of wood dust exposure should be carried out on a regular basis in wood pellet production units in Sweden as well in other countries. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  4. Effects of Mixing Temperature and Wood Powder Size on Mechanical Properties of Wood Plastic Recycled Composite (United States)

    Miki, Tsunehisa; Sugimoto, Hiroyuki; Kojiro, Keisuke; Kanayama, Kozo; Yamamoto, Ken

    In this study, wood (cedar) powder ranging from 53 µm to 1 mm sizes, recycled polypropylene (PP) / polyethylene (PE) and acid-modified PP as a compatibilization agent were used to produce a wood-plastic recycled composite (WPRC). For discussing the effects of the wood powder sizes on the mechanical properties of the WPRC, a mixing process of the wood powder and the plastics in a constant wood content of 50% weight was firstly performed by a mixing machine controlled temperature and rotation of mixing blade. And then, to obtain WPRC panels the wood and plastics mixtures were compressed in a mould under a constant pressure and a temperature for a certain holding time. WPRC specimens for mechanical tests were cut from the WPRC panels, and a tensile strength and a size-stability were acquired. The results show that the successful mixing process runs above 180°C, where the mixing torque required compounding keeps constant or slightly increases. The tensile strength of the WPRC increases when the smaller size of wood powder is used for wood/plastic compound under successful mixing conditions. It is shown from thickness change rate of specimens that mixing temperature of wood/plastic compound affects a size stability of the WPRC.

  5. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    Directory of Open Access Journals (Sweden)

    Elena Bobeková


    Full Text Available The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit. The experiment based on dry rot fungus (Serpula lacrymans detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was identified using the PCR–based methods including species-specific PCR and sequencing of amplified ITS region of ribosomal DNA.

  6. Common wood decay fungi found in the Caribbean Basin (United States)

    D. Jean. Lodge


    There are hundreds of wood-decay fungi in the Caribbean Basin, but relatively few of these are likely to grow on manmade structures built of wood or wood-composites. The wood-decay fungi of greatest concern are those that cause brown-rot, and especially brown-rot fungi that are resistant to copper-based wood preservatives. Some fungi that grow in the Caribbean and...



    İsmail Aydın; Gürsel Çolakoğlu


    Some visual characteristics of wood such as color, pattern and texture determine the quality of manufactured products. Surface properties of wood material are important both in production and marketing after production. Initial studies related to the roughness of wood surface were begun in early 1950’s. However, no general agreed standardization can not have been developed for wood surfaces. Surface roughness of wood is function of the production process, product type and the natural anatomic...

  8. Manufacture, delivery and marketing of wood pellets

    International Nuclear Information System (INIS)

    Huhtanen, T.


    Wood pellet is a cheap fuel, the use of which can easily bee automated. Pellet heating can be carried out with a stoker or a pellet burner, which can be mounted to oil and solid fuels boiler or to solid fuel boilers. Vapo Oy delivers wood pellet to farms and detached houses via Agrimarket stores. Vapo Oy delivers pellets to large real estates, municipalities, industry, greenhouses and power plants directly as bulk. The pellets are delivered either by trailers or lorries equipped with fan-operated unloaders. The use of wood pellets is a suitable fuel especially for real estates, the boiler output of which is 20 - 1000 kW. Vapo Oy manufactures wood pellets of cutter chips, grinding dust and sawdust. The raw material for Ilomantsi pellet plant is purchased from the province of North Karelia. The capacity of pelletizing plant is 45 000 t of pellets per year, half of which is exported mainly to Sweden and Denmark

  9. Bioinspired Wood Nanotechnology for Functional Materials. (United States)

    Berglund, Lars A; Burgert, Ingo


    It is a challenging task to realize the vision of hierarchically structured nanomaterials for large-scale applications. Herein, the biomaterial wood as a large-scale biotemplate for functionalization at multiple scales is discussed, to provide an increased property range to this renewable and CO 2 -storing bioresource, which is available at low cost and in large quantities. The Progress Report reviews the emerging field of functional wood materials in view of the specific features of the structural template and novel nanotechnological approaches for the development of wood-polymer composites and wood-mineral hybrids for advanced property profiles and new functions. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Wood biomass gasification in the world today

    International Nuclear Information System (INIS)

    Nikolikj, Ognjen; Perishikj, Radovan; Mikulikj, Jurica


    Today gasification technology of different kinds represents a more and more interesting option of the production of energy forms. The article describes a biomass gasification plant (waste wood) Sydkraft, Vernamo from Sweden. (Author)

  11. Wood machining highlights, 1972 and 1973 (United States)

    Charles W. Mcmillin


    Important wood machining research published during 1972 and 1973 is highlighted to provide the reader with a concise summary of activity in 17 fields of endeavor. The review is based on 427 references and contains 154 citations.

  12. Habitat characteristics of wintering Wood Warbler Phylloscopus ...

    African Journals Online (AJOL)

    Habitat characteristics of wintering Wood Warbler Phylloscopus sibilatrix in the Centre Region of Cameroon: conservation implications. Taku Awa II, Tsi A Evaristus, Robin C Whytock, Tsetagho Guilain, John Mallord ...

  13. Cold shock on the wood fuel industry

    International Nuclear Information System (INIS)

    Queyrel, A.


    The development of the wood fuel industry represents one of the pillars of the European energy plan, and in particular of the French energy policy, as it fulfills both objectives of development of renewable energy sources and CO 2 balance. The wood fuel industry supplies 6% of the French energy consumption and has permitted to save more than 9 million tons of petroleum equivalent. However, the conclusions of the European project CARBOSOL stress on the strong health impacts of wood-fueled combustion systems, in particular in the case of domestic individual systems and appliances. The combustion of biomass (fireplaces and agriculture) is responsible for 50 to 70% of the winter carbon pollution in Europe. The situation of collective or industrial wood-fueled facilities is different since pollution control solutions can be more easily implemented. (J.S.)

  14. Gamma radiation a help to archeological woods

    International Nuclear Information System (INIS)

    Balibar, F.


    Waterlogged archeological wood falls into dust once extracted from the water. In order to prevent this destruction several processes have been thought up. In France, the Grenoble Nuclear Study Centre has developed a method of consolidation by resin impregnation and gamma irradiation. The object is first immersed in a vessel containing liquid resin which spreads throughout the wood thereby driving off the water. During the second stage of the treatment, the impregnated objects are irradiated by gamma radiation emitted by a rectangular grid of cobalt 60, so as to polymerize the resin inside the wood. The irradiated objects are Gallo-Roman statuettes discovered during digs at the sources of the river Seine. The wood consolidated right through to the core then becomes sufficiently solid for the restorer to work on the surface of these objects [fr

  15. Understanding the Residential Wood Heater Rules (United States)

    Information on the components of the current wood heater new source performance standards (NSPS) and proposed updates to the NSPS including which types of heaters are covered under the rules and the benefits.

  16. 2015 OLC Lidar DEM: Big Wood, ID (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Quantum Spatial has collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Big Wood 2015 study area. This study area is located in...

  17. Chemistry and stoichiometry of wood liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Davis, H.G.; Kloden, D.J.; Schaleger, L.L.


    The approximate stoichiometry of liquefaction, from data of two PDU runs and a laboratory run is Wood (100 g) + CO (0.1 - 0.4 Mol) ..-->.. CO/sub 2/ (0.5 - 1.0 Mol) + H/sub 2/O (0.4 - 0.8 Mol) + Product (55 - 64 g). Product includes wood oil, water soluble organics and residues. Water is formed by decomposition, carbon dioxide by decomposition and reduction of wood oxygen by CO. Aqueous products include many carboxylic acids plus a roughly equal percentage of non-acids. The wood oil is divided into a neutral fraction and three phenolic fractions of varying molecular weight. Some specific compounds found in water and oil phases are listed.

  18. Wood ethanol and synthetic natural gas pathways

    Energy Technology Data Exchange (ETDEWEB)



    This report provided details of updates to the wood ethanol pathway recently added to the GHGenius model, an analytical tool used to analyze emissions from conventional and alternative fuel combustion processes. The pathway contains data developed by the United States Department of Energy. A number of co-products were added to the wood and agricultural residue pathways, including furfural, xylitol, lignin, and glycerol. New chemical inputs included nitrogen gas, ammonia, enzymes and yeast. Biological ethanol pathways were reviewed, and separate inputs for wood, agricultural residues, corn ethanol, and wheat ethanol were added. The model was updated to reflect current research conducted on the gasification of wood and the upgrading of the gas to produce pipeline quality natural gas. New process developments in producing pipeline quality gas from coal were also added. The ability to model enzyme consumption was added to all ethanol pathways. 25 refs., 41 tabs., 8 figs.

  19. Wood decomposition as influenced by invertebrates. (United States)

    Ulyshen, Michael D


    The diversity and habitat requirements of invertebrates associated with dead wood have been the subjects of hundreds of studies in recent years but we still know very little about the ecological or economic importance of these organisms. The purpose of this review is to examine whether, how and to what extent invertebrates affect wood decomposition in terrestrial ecosystems. Three broad conclusions can be reached from the available literature. First, wood decomposition is largely driven by microbial activity but invertebrates also play a significant role in both temperate and tropical environments. Primary mechanisms include enzymatic digestion (involving both endogenous enzymes and those produced by endo- and ectosymbionts), substrate alteration (tunnelling and fragmentation), biotic interactions and nitrogen fertilization (i.e. promoting nitrogen fixation by endosymbiotic and free-living bacteria). Second, the effects of individual invertebrate taxa or functional groups can be accelerative or inhibitory but the cumulative effect of the entire community is generally to accelerate wood decomposition, at least during the early stages of the process (most studies are limited to the first 2-3 years). Although methodological differences and design limitations preclude meta-analysis, studies aimed at quantifying the contributions of invertebrates to wood decomposition commonly attribute 10-20% of wood loss to these organisms. Finally, some taxa appear to be particularly influential with respect to promoting wood decomposition. These include large wood-boring beetles (Coleoptera) and termites (Termitoidae), especially fungus-farming macrotermitines. The presence or absence of these species may be more consequential than species richness and the influence of invertebrates is likely to vary biogeographically. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  20. Transparent wood for functional and structural applications (United States)

    Li, Yuanyuan; Fu, Qiliang; Yang, Xuan; Berglund, Lars


    Optically transparent wood combines mechanical performance with optical functionalities is an emerging candidate for applications in smart buildings and structural optics and photonics. The present review summarizes transparent wood preparation methods, optical and mechanical performance, and functionalization routes, and discusses potential applications. The various challenges are discussed for the purpose of improved performance, scaled-up production and realization of advanced applications. This article is part of a discussion meeting issue `New horizons for cellulose nanotechnology'.

  1. Supplies and production of aircraft wood (United States)

    Sparhawk, W N


    The purpose of this report is to present in brief form such information as is available regarding the supplies of the kinds of wood that have been used or seem likely to become important in the construction of airplanes, and the amount of lumber of each species normally put on the market each year. A general statement is given of the uses to which each kind of wood is or may be put.

  2. Wood durability and stability without toxicity (United States)

    Roger M. Rowell; Rebecca E. Ibach; Thomas Nilsson


    Part of a sustainable future for wood products depends on extending the lifetime of wood used in adverse environments. For some products such as the daily news paper, the average life of the products is one day. For packaging, the products average life time may be as few days to a few weeks. For pallets and wooden containers, the lifetime may be several months. For...

  3. Floodplain Mapping Submission for Oregon County, MO (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The Floodplain Mapping study deliverables depict and quantify the flood risks for Oregon County, MO. The City of Thayer and the Missouri State Emergency Management...

  4. Phase transformations in Mo-doped FINEMETs

    Energy Technology Data Exchange (ETDEWEB)

    Silveyra, Josefina M., E-mail: jsilveyra@fi.uba.a [Lab. de Solidos Amorfos, INTECIN, FIUBA-CONICET, Paseo Colon 850, (C1063ACV) Buenos Aires (Argentina); Illekova, Emilia; Svec, Peter; Janickovic, Dusan [Institute of Physics SAS, Dubravska cesta 9, 845 11 Bratislava (Slovakia); Rosales-Rivera, Andres [Laboratorio de Magnetismo y Materiales Avanzados, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Colombia, Manizales (Colombia); Cremaschi, Victoria J. [Lab. de Solidos Amorfos, INTECIN, FIUBA-CONICET, Paseo Colon 850, (C1063ACV) Buenos Aires (Argentina)


    In this paper, the phase transformations occurring during the crystallization process of FINEMETs in which Nb has been gradually replaced by Mo have been studied by a variety of techniques including DSC, DTA, TGA, XRD and TEM. The thermal stability of the alloy was deteriorated as a consequence of Mo's smaller atomic size. The gradual replacement of Nb by Mo reduced the onset temperature of Fe-Si and of the borides. The Curie temperature of the amorphous phase slightly decreased from 594 K for x=0 to 587 K for x=3. The borides compounds Fe{sub 2}B and Fe{sub 23}B{sub 6} as well as the (Nb,Mo){sub 5}Si{sub 3} phase were found to precipitate in the second and third crystallization.

  5. Alternative energy resources for MoDOT (United States)


    This research investigates environmentally friendly alternative energy sources that could be used by MoDOT in various areas, and develops applicable and sustainable strategies to implement those energy sources.

  6. Wood versus quality of the air?

    International Nuclear Information System (INIS)

    Richard, A.


    CITEPA has estimated at 875000 tonnes the releases of fine particles in France in 2014. Wood heating is responsible for 1/3 of the release of PM10 particles (particles with a diameter lower than 10 μm) and for half of the release of PM2.5 particles. PM2.5 particles are particles whose diameter is lower than 2.5 μm, they are more dangerous than PM10 particles because they enter the lungs more deeply. In 2012 the World Health Organisation acknowledged fine particles as responsible for lung cancers. The other contributors are industry (20 to 30%) and transport (16%). The uncertainties on the figures are important and can reach 50% as the estimations are based on extrapolations but wood heating appears to be the major polluter. The solution is to promote the installation of new wood heating systems that release far less particles. Open fireplaces and closed fireplaces installed before 2002 release respectively 97 and 91 kg of fine particles a year while closed fireplaces installed after 2007 release only 8 kg a year and the latest closed systems only 3 kg a year. In some mountainous regions like Haute-Savoie where wood heating is a tradition, local authorities give financial helps to individuals to install efficient systems. Community wood heating and industrial wood boilers have been equipped with efficient filters since the first Grenelle law on the environment took effect and their releases of fine particles have dropped sharply. (A.C.)

  7. Determination of Mo in U-Mo alloy. EDTA volumetric method

    International Nuclear Information System (INIS)

    Wang Meiling; Wang Shu'an Hou Lieqi


    The determination methods of Mo are mentioned and EDTA volumetric method is proposed to determine the quantity of Mo in U-Mo alloy. According to the method, some condition experiments are done to confirm the quantity of some reagents. The results are satisfying. When the sample weight is 0.1-0.25 g, the precision is superior to 1% and the percent recovery is 99.2%-101.0%. (authors)

  8. 99Mo production using MoO3 pellets obtained by mechanical compression and heat treatment

    International Nuclear Information System (INIS)

    Rojas, Jorge; Mendoza, Pablo; Lopez, Alcides


    This paper shows the results of the MoO 3 pellets fabrication by mechanical compression and the heat treatment method (MCHT) in order to optimize the production of 99 Mo in the RACSO Nuclear Center. The effects of polyvinyl alcohol (PVA) as binder are assessed by heat treatment of pellets in air atmosphere, evaluating the elimination process with increasing temperature and solubility in 5N NaOH. The results show that the pellets fabrication technique is suitable because fulfills the required technical specifications, allows to irradiate 50 % more of 98 Mo mass and facilitate a safer radiological handling of the irradiated MoO 3 . (authors).

  9. Mo100 to Mo99 Target Cooling Enhancements Report

    Energy Technology Data Exchange (ETDEWEB)

    Woloshun, Keith Albert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Olivas, Eric Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mocko, Michal [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    Target design requirements changed significantly over the past year to a much higher beam current on larger diameter disks, and with a beam impingement on both ends of the target. Scaling from the previous design, that required significantly more mass flow rate of helium coolant, and also thinner disks. A new Aerzen GM12.4 blower was selected that can deliver up to 400 g/s at 400 psi, compared to about 100 g/s possible with the Tuthill blower previously selected.Further, to accommodate the 42 MeV, 2.7 mA beam on each side of the target, the disk thickness and the coolant gaps were halved to create the current baseline design: 0.5 mm disk thickness (at 29 mm diameter) and 0.25 mm coolant gap. Thermal-hydraulic analysis of this target, presented below for reference, gave very good results, suggesting that the target could be improved with fewer, thicker disks and with disk thickness increasing toward the target center. The total thickness of Mo100 in the target remaining the same, that reduces the number of coolant gaps. This allows for the gap width to be increased, increasing the mass flow in each gap and consequently increasing heat transfer. A preliminary geometry was selected and analyzed with variable disk thickness and wider coolant gaps. The result of analysis of this target shows that disk thickness increase near the window was too aggressive and further resizing of the disks is necessary, but it does illustrate the potential improvements that are possible. Experimental and analytical study of diffusers on the target exit has been done. This shows modest improvement in requcing pressure drop, as will be summarized below. However, the benefit is not significant, and implementation becomes problematic when disk thickness is varying. A bull nose at the entrance does offer significant benefit and is relatively easy to incorporate. A bull nose on both ends is now a feature of the baseline design, and will be a feature of any redesign or enhanced designs that

  10. Short rotation Wood Crops Program

    Energy Technology Data Exchange (ETDEWEB)

    Wright, L.L.; Ehrenshaft, A.R.


    This report synthesizes the technical progress of research projects in the Short Rotation Woody Crops Program for the year ending September 30, 1989. The primary goal of this research program, sponsored by the US Department of Energy's Biofuels and Municipal Waste Technology Division, is the development of a viable technology for producing renewable feedstocks for conversion to biofuels. One of the more significant accomplishments was the documentation that short-rotation woody crops total delivered costs could be $40/Mg or less under optimistic but attainable conditions. By taking advantage of federal subsidies such as those offered under the Conservation Reserve Program, wood energy feedstock costs could be lower. Genetic improvement studies are broadening species performance within geographic regions and under less-than-optimum site conditions. Advances in physiological research are identifying key characteristics of species productivity and response to nutrient applications. Recent developments utilizing biotechnology have achieved success in cell and tissue culture, somaclonal variation, and gene-insertion studies. Productivity gains have been realized with advanced cultural studies of spacing, coppice, and mixed-species trials. 8 figs., 20 tabs.


    Directory of Open Access Journals (Sweden)

    İsmail Aydın


    Full Text Available Some visual characteristics of wood such as color, pattern and texture determine the quality of manufactured products. Surface properties of wood material are important both in production and marketing after production. Initial studies related to the roughness of wood surface were begun in early 1950’s. However, no general agreed standardization can not have been developed for wood surfaces. Surface roughness of wood is function of the production process, product type and the natural anatomical properties of wood. Contact and non-contact tracing methods are used to measure of wood surface roughness. Surface roughness also affects the gluability and wettability of wood surfaces. The success in finishing also depends on the surface roughness of wood.

  12. Wood energy barometer. 43 million toe produced in 2003

    International Nuclear Information System (INIS)



    The use of wood in the form of energy contributes in fighting global warming since, unlike fossil energies, the carbon dioxide emitted by its combustion is reabsorbed by the forests. These environmental and energetic advantages explain why the European Union large wood countries are preparing programmes to develop both wood energy technologies and wood energy consumption; This document takes stock or gives information on the breakdown of valorization of wood energy origin primary energy, the gross electricity generation from wood energy in the 15 european union countries and Poland, the primary energy from wood energy, the comparative between different wood energy fuel prices in Europe, the number of direct and indirect job created in different sectors, the wood energy sector industrialists and a comparison between current trend and white paper objectives. (A.L.B.)

  13. Extraction of chromium, copper, and arsenic from CCA-treated wood by using wood vinegar. (United States)

    Choi, Yong-Seok; Ahn, Byoung Jun; Kim, Gyu-Hyeok


    In the present study, wood vinegar was used to extract chromium, copper, and arsenic from chromated copper arsenate (CCA)-treated wood. The extraction efficiency for CCA elements was evaluated using various concentrations of wood vinegar, extraction temperatures, and extraction periods. The extraction efficiency for CCA elements increased with increasing the concentration of wood vinegar and the extraction conditions, resulting in maximal removal rate of copper (95.7%), followed by arsenic (92.7%) and chromium (86.3%). Since wood vinegar afforded high levels of copper extraction, its use was extended to copper-based preservative-treated wood, wherein significant extraction of copper up to 97.6% and 95.7% was obtained from alkaline copper quats (ACQ)- and copper azole (CuAz)-treated sawdust, respectively. To the best of our knowledge, this is the first study on the application of wood vinegar for the extraction of metal elements from CCA-treated wood. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. An assessment of management practices of wood and wood-related wastes in the urban environment

    Energy Technology Data Exchange (ETDEWEB)



    The US Environmental Protection Agency estimates that yard waste{sup 1} accounts for approximately 16% of the municipal solid waste (MSW) stream (US EPA, 1994). Until recently, specific data and related information on this component of the (MSW) stream has been limited. The purposes of this study, phase two of the three-phase assessment of urban wood waste issues, are to assess and describe current alternatives to landfills for urban wood waste management; provide guidance on the management of urban wood waste to organizations that produce or manage wood waste; and clarify state regulatory and policy positions affecting these organizations. For this study, urban wood waste is defined as solid waste generated by tree and landscape maintenance services (public and private). Urban wood waste includes the following materials: unchipped mixed wood, unchipped logs, and unchipped tops and brush; clearing and grubbing waste; fall leaves and grass clippings; and chips and whole stumps. Construction and demolition debris and consumer-generated yard waste are not included in this study. Generators of urban wood waste include various organizations; municipal, county, and commercial tree care divisions; nurseries, orchards, and golf courses; municipal park and recreation departments; and electric and telephone utility power line maintenance, excavator and land clearance, and landscape organizations. (1) US EPA defines yard waste as ''yard trimmings'' which includes ''grass, leaves and tree brush trimmings from residential, institutional, and commercial sources.''

  15. Chapter 6: Above Ground Deterioration of Wood and Wood-Based Materials (United States)

    Grant Kirker; Jerrold Winandy


    Wood as a material has unique properties that make it ideal for above ground exposure in a wide range of structural and non-strucutral applications. However, no material is without limitations. Wood is a bio-polymer which is subject to degradative processes, both abiotic and biotic. This chapter is a general summary of the abiotic and biotic factors that impact service...

  16. Development of wood decay in wound-initiated discolored wood of eastern red cedar (United States)

    Walter C. Shortle; Kenneth R. Dudzik; Kevin T. Smith


    Logs of eastern red cedar, Juniperus virginiana L., with well-developed bands of light-colored wood ("included sapwood") within heartwood can be unsuitable for sawn wood products. This finding is in contrast to published information that the "included sapwood" is (1) a heartwood anomaly rather than sapwood and (2) its occurrence...

  17. Wood-plastic composites utilizing wood flours derived from fast- growing trees common to the midwest (United States)

    There are several non- or under-utilized hardwood trees common to the Midwestern states. Wood flour (WF) derived from fast-growing Midwest trees (Osage orange, Black Locust and Red Mulberry) were evaluated as a source of bio-based fiber reinforcements. Wood plastic composites (WPC) of high density p...

  18. Surface characterization of weathered wood-plastic composites produced from modified wood flour (United States)

    James S. Fabiyi; Armando G. McDonald; Nicole M. Stark


    The effects of weathering on the surface properties of wood-plastic composites (WPC) were examined. High-density polyethylene (HDPE) based WPCs made from modified wood flour (untreated, extractives free, and holocellulose (delignified) fibers) were subjected to accelerated (xenon-arc) weathering. Colorimetry and Fourier-transform infrared spectroscopy were employed to...

  19. Long term durability of wood-plastic composites made with chemically modified wood (United States)

    Rebecca E. Ibach; Craig M. Clemons


    Wood-plastic composites (WPCs) have slower moisture sorption than solid wood, but over time moisture can impact the strength, stiffness, and decay of the composite. These changes will become increasingly important if WPCs are used in more challenging environments such as in ground-contact applications. There are several options for mitigating the moisture sorption of...

  20. Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene (United States)

    Alex Wiedenhoeft


    Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

  1. A review of wood thermal pretreatments to improve wood composite properties (United States)

    Manuel Raul Pelaez-Samaniego; Vikram Yadama; Eini Lowell; Raul. Espinoza-Herrera


    The objective of this paper is to review the published literature on improving properties of wood composites through thermal pretreatment of wood. Thermal pretreatment has been conducted in moist environments using hot water or steam at temperatures up to 180 and 230 ˚C, respectively, or in dry environments using inert gases at temperatures up to 240 ...

  2. Decay resistance of wood-plastic composites reinforced with extracted or delignified wood flour (United States)

    Rebecca E. Ibach; Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Yongming Fan; Jianmin Gao


    The moisture and decay resistance of wood-plastic composites (WPCs) reinforced with extracted or delignified wood flour (WF) was investigated. Three different extractions were preformed: toluene/ethanol (TE), acetone/water (AW), and hot water (HW). Delignification (DL) was performed using a sodium chlorite/acetic acid solution. All WPCs specimens were made with 50% by...

  3. Properties of wood-plastic composites (WPCs) reinforced with extracted and delignified wood flour (United States)

    Yao Chen; Nicole M. Stark; Mandla A. Tshabalala; Jianmin Gao; Yongming Fan


    The water sorption and mechanical properties of wood-plastic composites (WPCs) made of extracted and delignified wood flour (WF) has been investigated. WF was prepared by extraction with the solvent systems toluene/ethanol (TE), acetone/water (AW), and hot water (HW), and its delignification was conducted by means of sodium chlorite/acetic acid (AA) solution. A 2 4...

  4. Furniture wood wastes: Experimental property characterisation and burning tests

    International Nuclear Information System (INIS)

    Tatano, Fabio; Barbadoro, Luca; Mangani, Giovanna; Pretelli, Silvia; Tombari, Lucia; Mangani, Filippo


    Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675 to 5105 kcal kg -1 for HHV, and from 3304 to 4634 kcal kg -1 for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM 1 fraction during incomplete industrial wood burning.

  5. Microstructural defects modeling in the Al-Mo system

    International Nuclear Information System (INIS)

    Pascuet, Maria I.; Fernandez, Julian R.; Monti, Ana M.


    In this work we have utilized computer simulation techniques to study microstructural defects, such as point defects and interfaces, in the Al-Mo alloy. Such alloy is taken as a model to study the Al(fcc)/U-Mo(bcc) interface. The EAM interatomic potential used has been fitted to the formation energy and lattice constant of the AlMo 3 intermetallic. Formation of vacancies for both components Al and Mo and anti-sites, Al Mo and Mo Al , as well as vacancy migration was studied in this structure. We found that the lowest energy defect complex that preserves stoichiometry is the antisite pair Al Mo +Mo Al , in correspondence with other intermetallics of the same structure. Our results also suggest that the structure of the Al(fcc)/Mo(bcc) interface is unstable, while that of the Al(fcc)/Al 5 Mo interface is stable, as observed experimentally. (author) [es

  6. Climate effects of wood used for bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Ros, Jan P.M.; Van Minnen, Jelle G. [Netherlands Environmental Assessment Agency PBL, Bilthoven (Netherlands); Arets, Eric J.M.M. [Alterra, Wageningen University WUR, Wageningen (Netherlands)


    Wood growth and natural decay both take time, and this is an important aspect of sustainability assessments of wood used for energy. Wood taken from forests is a carbon-neutral energy source in the long term, but there are many examples of potential sources of wood used for bioenergy for which net emission reductions are not achieved in 10 to 40 years - the time frame for most climate policy mitigation targets. This is caused by two factors. The first factor relates to the fact that the carbon cycles of wood have a long time span. After final felling, CO2 fixation rates are initially relatively low, but increase again as forests regrow. This regrowth takes many years, sometimes more than a century. Wood residues can either be used or left in the forest. By using them, the emissions from the otherwise decaying residues (taking 2 to 30 years) would be avoided. The second factor concerns the fact that, if the wood is used for bioenergy, then fossil energy emissions are being avoided. However, the direct emission levels from bioenergy are higher than those related to the fossil energy it replaces. These additional emissions also have to be compensated. The carbon debt caused by both factors has to be paid back first, before actual emission reductions can be realised. For wood residues (from harvesting or thinning) that are used to replace coal or oil products, these payback times are relatively short, of the order of 5 to 25 years, mainly depending on location and type of residue (longer if they replace gas). This is also the case when using wood from salvage logging. In most cases, when using wood from final felling directly for energy production, payback times could be many decades to more than a century, with substantial increases in net CO2 emissions, in the meantime. This is especially the case for many forests in Europe, because they are currently an effective carbon sink. Additional felling reduces average growth rates in these forests and thus the sequestration

  7. Differentiation of Wines Treated with Wood Chips Based on Their Phenolic Content, Volatile Composition, and Sensory Parameters. (United States)

    Kyraleou, Maria; Kallithraka, Stamatina; Chira, Kleopatra; Tzanakouli, Eleni; Ligas, Ioannis; Kotseridis, Yorgos


    The effects of both wood chips addition and contact time on phenolic content, volatile composition, color parameters, and organoleptic character of red wine made by a native Greek variety (Agiorgitiko) were evaluated. For this purpose, chips from American, French, Slavonia oak, and Acacia were added in the wine after fermentation. A mixture consisting of 50% French and 50% Americal oak chips was also evaluated. In an attempt to categorize wine samples, various chemical parameters of wines and sensory parameters were studied after 1, 2, and 3 mo of contact time with chips. The results showed that regardless of the type of wood chips added in the wines, it was possible to differentiate the samples according to the contact time based on their phenolic composition and color parameters. In addition, wood-extracted volatile compounds seem to be the critical parameter that could separate the samples according to the wood type. The wines that were in contact with Acacia and Slavonia chips could be separated from the rest mainly due to their distinct sensory characters. © 2015 Institute of Food Technologists®

  8. Coal and wood fuel for electricity production: an environmentally sound solution for waste and demolition wood

    Energy Technology Data Exchange (ETDEWEB)

    Penninks, F.W.; Zonneveld, N. [nv EPON, Zwolte (Netherlands)


    Waste wood from primary wood processing and demolition presents both a problem and potential. If disposed of in land-fills, it consumes large volumes and decays, producing CH{sub 4}, CO{sub 2} and other greenhouse gases. As an energy source used in a coal fired power plant it reduces the consumption of fossil fuels reducing the greenhouse effect significantly. Additional advantages are a reduction of the ash volume and the SO{sub 2} and NO{sub x} emissions. The waste wood requires collection, storage, processing and burning. This paper describes a unique project which is carried out in the Netherlands at EPON`s Gelderland Power Plant (635 MWe) where 60,000 tonnes of waste and demolition wood will be used yearly. Special emphasis is given to the processing of the powdered wood fuel. 1 fig., 5 tabs.

  9. Impact of reduced graphene oxide on MoS{sub 2} grown by sulfurization of sputtered MoO{sub 3} and Mo precursor films

    Energy Technology Data Exchange (ETDEWEB)

    Pacley, Shanee, E-mail:; Brausch, Jacob; Beck-Millerton, Emory [U.S. Air Force Research Laboratory (AFRL)/Wright Patterson Air Force Base, Wright Patterson, Ohio 45433-7707 (United States); Hu, Jianjun; Jespersen, Michael [University of Dayton Research Institute, 300 College Park, Dayton, Ohio 45469 (United States); Hilton, Al [Wyle Laboratories, 4200 Colonel Glenn Hwy, Beavercreek, Ohio 45431 (United States); Waite, Adam [University Technology Corporation, 1270 N Fairfield Rd., Beavercreek, Ohio 45432 (United States); Voevodin, Andrey A. [Department of Materials Science and Engineering, University of North Texas, 1155 Union Circle, Denton, Texas 76203 (United States)


    Monolayer molybdenum disulfide (MoS{sub 2}), a two dimensional semiconducting dichalcogenide material with a bandgap of 1.8–1.9 eV, has demonstrated promise for future use in field effect transistors and optoelectronics. Various approaches have been used for MoS{sub 2} processing, the most common being chemical vapor deposition. During chemical vapor deposition, precursors such as Mo, MoO{sub 3}, and MoCl{sub 5} have been used to form a vapor reaction with sulfur, resulting in thin films of MoS{sub 2}. Currently, MoO{sub 3} ribbons and powder, and MoCl{sub 5} powder have been used. However, the use of ribbons and powder makes it difficult to grow large area-continuous films. Sputtering of Mo is an approach that has demonstrated continuous MoS{sub 2} film growth. In this paper, the authors compare the structural properties of MoS{sub 2} grown by sulfurization of pulse vapor deposited MoO{sub 3} and Mo precursor films. In addition, they have studied the effects that reduced graphene oxide (rGO) has on MoS{sub 2} structure. Reports show that rGO increases MoS{sub 2} grain growth during powder vaporization. Herein, the authors report a grain size increase for MoS{sub 2} when rGO was used during sulfurization of both sputtered Mo and MoO{sub 3} precursors. In addition, our transmission electron microscopy results show a more uniform and continuous film growth for the MoS{sub 2} films produced from Mo when compared to the films produced from MoO{sub 3}. Atomic force microscopy images further confirm this uniform and continuous film growth when Mo precursor was used. Finally, x-ray photoelectron spectroscopy results show that the MoS{sub 2} films produced using both precursors were stoichiometric and had about 7–8 layers in thickness, and that there was a slight improvement in stoichiometry when rGO was used.

  10. Temperature effects on wood anatomy, wood density, photosynthesis and biomass partitioning of Eucalyptus grandis seedlings. (United States)

    Thomas, D S; Montagu, K D; Conroy, J P


    Wood density, a gross measure of wood mass relative to wood volume, is important in our understanding of stem volume growth, carbon sequestration and leaf water supply. Disproportionate changes in the ratio of wood mass to volume may occur at the level of the whole stem or the individual cell. In general, there is a positive relationship between temperature and wood density of eucalypts, although this relationship has broken down in recent years with wood density decreasing as global temperatures have risen. To determine the anatomical causes of the effects of temperature on wood density, Eucalyptus grandis W. Hill ex Maiden seedlings were grown in controlled-environment cabinets at constant temperatures from 10 to 35 degrees C. The 20% increase in wood density of E. grandis seedlings grown at the higher temperatures was variously related to a 40% reduction in lumen area of xylem vessels, a 10% reduction in the lumen area of fiber cells and a 10% increase in fiber cell wall thickness. The changes in cell wall characteristics could be considered analogous to changes in carbon supply. Lumen area of fiber cells declined because of reduced fiber cell expansion and increased fiber cell wall thickening. Fiber cell wall thickness was positively related to canopy CO2 assimilation rate (Ac), which increased 26-fold because of a 24-fold increase in leaf area and a doubling in leaf CO2 assimilation rate from minima at 10 and 35 degrees C to maxima at 25 and 30 degrees C. Increased Ac increased seedling volume, biomass and wood density; but increased wood density was also related to a shift in partitioning of seedling biomass from roots to stems as temperature increased.

  11. [Application of near infrared spectroscopy in analysis of wood properties]. (United States)

    Yao, Sheng; Pu, Jun-wen


    There is substantial interest in the improvement of wood properties through genetic selection or a change in silviculture prescription. Tree breeding purpose requires measurement of a large number of samples. However, traditional methods of assessing wood properties are both time consuming and destructive, limiting the numbers of samples that can be processed, so new method would be needed to find. Near infrared spectroscopy (NIR) is an advanced spectroscopic tool for nondestructive evaluation of wood and it can quickly, accurately estimate the properties of increment core, solid wood or wood meal. The present paper reviews the advances in the research on the wood chemistry properties and anatomical properties using NIR.

  12. Wood energy in Switzerland - fillet steaks and sausages

    International Nuclear Information System (INIS)

    Keel, A.


    This article discusses the increasing use of wood energy to help meet Switzerland's energy needs. The increasing interest in wood-fired systems in comparison with fossil fuels is commented on. The article presents figures on energy carriers and the shares of the energy supply they meet as well as the development of wood-fired systems between 1991 and 2003. The influence of Swiss regional identities on the market for wood heating systems is discussed, as are difficulties resulting from stop-and-go governmental promotional funding. The importance of wood-fired energy systems for local authorities with difficulties in selling wood from their communal forestry departments is also discussed

  13. Spectrophotometric and potentiometric studies of oxidation of Mo(III) by Mo(VI) in phosphoric acid medium

    International Nuclear Information System (INIS)

    Kumar, Arvind; Verma, G.S.P.


    Oxidation of Mo(III) (green) by Mo(VI) in an inert atmosphere and in orthophosphoric acid medium at various acid concentrations is reported. Potentiometric and spectrophotometric data suggest that oxidation of Mo(III) proceeds to Mo(V) through a binuclear species Mo(III) Mo(IV) absorbing at 400 nm. The formation of this species is facilitated at high acid concentrations. It is further found that quantitative conversion of Mo(III) into Mo(V) takes place at fairly high acid concentrations. In high phosphoric acid concentrations, solution of Mo(III) has been found to be oxidized to Mo(VI) by air and hence this can be used as a good oxygen absorber. (author)

  14. DFT study of the reactions of Mo and Mo with CO2 in gas phase

    Indian Academy of Sciences (India)

    Abstract. Density functional theory (DFT) calculations have been performed to explore the potential energy surfaces of C–O bond activation in CO2 molecule by gas-phase Mo. + cation and Mo atom, in order to better understanding the mechanism of second-row metal reacting with CO2. The minimum energy reaction path is.

  15. DFT study of the reactions of Mo and Mo with CO 2 in gas phase

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 3. DFT study of the reactions of Mo and Mo+ with CO2 in gas phase. Deman Han Guoliang Dai Hao Chen Hua Yan Junyong Wu Chuanfeng Wang Aiguo Zhong. Volume 123 Issue 3 May 2011 pp 299-309 ...

  16. Physiological Effects of Touching Coated Wood

    Directory of Open Access Journals (Sweden)

    Harumi Ikei


    Full Text Available This study examined the physiological effects of touching wood with various coating with the palm of the hand on brain activity and autonomic nervous activity. Participants were 18 female university students (mean age, 21.7 ± 1.6 years. As an indicator of brain activity, oxyhemoglobin concentrations were measured in the left and right prefrontal cortices using near-infrared time-resolved spectroscopy. Heart rate variability (HRV and heart rate were used as indicators of autonomic nervous activity. The high-frequency (HF component of HRV, which reflects parasympathetic nervous activity, and the low-frequency (LF/HF ratio, which reflects sympathetic nervous activity, were measured. Plates of uncoated, oil-finished, vitreous-finished, urethane-finished, and mirror-finished white oak wood were used as tactile stimuli. After sitting at rest with their eyes closed for 60 s, participants touched the stimuli with their palm for 90 s each. The results indicated that tactile stimulation with uncoated wood calmed prefrontal cortex activity (vs. urethane finish and mirror finish, increased parasympathetic nervous activity (vs. vitreous finish, urethane finish, and mirror finish, and decreased heart rate (vs. mirror finish, demonstrating a physiological relaxation effect. Further, tactile stimulation with oil- and vitreous-finished wood calmed left prefrontal cortex activity and decreased heart rate relative to mirror-finished wood.

  17. Wood-Based Nanotechnologies toward Sustainability. (United States)

    Jiang, Feng; Li, Tian; Li, Yiju; Zhang, Ying; Gong, Amy; Dai, Jiaqi; Hitz, Emily; Luo, Wei; Hu, Liangbing


    With over 30% global land coverage, the forest is one of nature's most generous gifts to human beings, providing shelters and materials for all living beings. Apart from being sustainable, renewable, and biodegradable, wood and its derivative materials are also extremely fascinating from a materials aspect, with numerous advantages including porous and hierarchical structure, excellent mechanical performance, and versatile chemistry. Here, strategies for designing novel wood-based materials via advanced nanotechnologies are summarized, including both the controllable bottom-up assembly from the highly crystalline nanocellulose building block and the more efficient top-down approaches directly from wood. Beyond material design, recent advances regarding the sustainable applications of these novel wood-based materials are also presented, focusing on areas that are traditionally dominated by man-made nonrenewable materials such as plastic, glass, and metals, as well as more advanced applications in the areas of energy storage, wastewater treatment and solar-steam-assisted desalination. With all recent progress pertaining to materials' design and sustainable applications presented, a vision for the future engineering of wood-based materials to promote continuous and healthy progress toward true sustainability is outlined. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Physiological Effects of Touching Coated Wood. (United States)

    Ikei, Harumi; Song, Chorong; Miyazaki, Yoshifumi


    This study examined the physiological effects of touching wood with various coating with the palm of the hand on brain activity and autonomic nervous activity. Participants were 18 female university students (mean age, 21.7 ± 1.6 years). As an indicator of brain activity, oxyhemoglobin concentrations were measured in the left and right prefrontal cortices using near-infrared time-resolved spectroscopy. Heart rate variability (HRV) and heart rate were used as indicators of autonomic nervous activity. The high-frequency (HF) component of HRV, which reflects parasympathetic nervous activity, and the low-frequency (LF)/HF ratio, which reflects sympathetic nervous activity, were measured. Plates of uncoated, oil-finished, vitreous-finished, urethane-finished, and mirror-finished white oak wood were used as tactile stimuli. After sitting at rest with their eyes closed for 60 s, participants touched the stimuli with their palm for 90 s each. The results indicated that tactile stimulation with uncoated wood calmed prefrontal cortex activity (vs. urethane finish and mirror finish), increased parasympathetic nervous activity (vs. vitreous finish, urethane finish, and mirror finish), and decreased heart rate (vs. mirror finish), demonstrating a physiological relaxation effect. Further, tactile stimulation with oil- and vitreous-finished wood calmed left prefrontal cortex activity and decreased heart rate relative to mirror-finished wood.

  19. Visual associative learning in wood ants. (United States)

    Fernandes, A Sofia D; Buckley, Christopher L; Niven, Jeremy E


    Wood ants are a model system for studying visual learning and navigation. They can forage for food and navigate to their nests effectively by forming memories of visual features in their surrounding environment. Previous studies of freely behaving ants have revealed many of the behavioural strategies and environmental features necessary for successful navigation. However, little is known about the exact visual properties of the environment that animals learn or the neural mechanisms that allow them to achieve this. As a first step towards addressing this, we developed a classical conditioning paradigm for visual learning in harnessed wood ants that allows us to control precisely the learned visual cues. In this paradigm, ants are fixed and presented with a visual cue paired with an appetitive sugar reward. Using this paradigm, we found that visual cues learnt by wood ants through Pavlovian conditioning are retained for at least 1 h. Furthermore, we found that memory retention is dependent upon the ants' performance during training. Our study provides the first evidence that wood ants can form visual associative memories when restrained. This classical conditioning paradigm has the potential to permit detailed analysis of the dynamics of memory formation and retention, and the neural basis of learning in wood ants. © 2018. Published by The Company of Biologists Ltd.

  20. P.E.I. wood fuel survey, 1990-91

    International Nuclear Information System (INIS)


    In 1991 a wood fuel survey of 450 randomly selected households, representing 1% of the total number of households in Prince Edward Island, was conducted. The survey indicated that 49.8% of the households burned wood, up from 42.1% of households in the 1988-1989 survey. The wood burning households consumed an average of 4.92 cords of wood, consistent with the 4.90 cords in the 1989 survey. The total residential wood consumption was estimated at ca 100,377 cords, an increase from the 89,000 cords used in 1988-89. Wood cutters represented 23.4% of respondents, with buyers representing 25.4% of respondents. The wood burning appliances used by the respondents were: airtight wood stove 39.9%, wood furnace 22.5%, kitchen wood stove 15.7%, combined wood/oil furnace 8.9%, Franklin/non-airtight 4.4%, Kemac unit 4.4%, fireplace insert 3.1%, and open fireplace 1%. The most frequent response among rural wood users cited price as an advantage of wood fuel, while the most frequent response of urban users cited the quality of the heat. 9 figs., 47 tabs

  1. Characteristics of heat-treated Turkish pine and fir wood after ThermoWood processing. (United States)

    Kol, Hamiyet Sahin


    The Finnish wood heat treatment technology ThermoWood, was recently introduced to Turkey. Data about the mechanical and physical properties of Turkish wood species are important for industry and academia. In this study two industrially important Turkish wood species, pine (Pinus nigraArnold.) and fir (Abies bornmülleriana Matf.) were heat-treated using the ThermoWood process. Pine and fir samples were thermally modified for 2 hr at 212 and 190 degrees C, respectively. The modulus of rupture (MOR), modulus of elasticity in bending (MOE), impact bending strength (IBS), and compression strength (CS), in addition to swelling (Sw) and shrinkage (Sh) of thermally-modified wood were examined. The results indicate that the heat treatment method clearly decreased the MOR, MOE and lBS of pine and fir. However, a small increase was observed for CS values of heat treated wood species. The most affected mechanical properties were MOR and lBS for both pine and fir. The reduction in MOE was smaller than that in MOR and lBS. Volumetric shrinkage and swelling of these species were also improved by approximately half. In Addition, the changes in the mechanical and physical properties studied in pine were larger than that of fir.

  2. Genetic improvement of trees for wood production, with particular refeference to wood traits

    Directory of Open Access Journals (Sweden)

    Nocetti M


    Full Text Available The use of selected propagation material from tree improvement programs is expected to lead to a more homogenous product, generally appreciated by industry. So far, breeding strategy have been mainly targeted to maximize acclimation/adaptation to specific environment conditions, tree growth and disease resistance, but it is not obvious that such strategy might lead to improvement of wood characteristics at the same time. Therefore, it seems important to introduce wood traits improvement as specific target of the selection process in tree breeding programs, and/or to assess heritability of wood technological properties of trees previously selected based on different criteria. Investigations reported so far have revealed that several wood traits are under a medium to high genetic control. The main goal of this work is to discuss the suitability of wood traits improvement as main target of specific breeding programs, with particular attention to wood technological characteristics to be considered in the tree selection process. Finally, we focused on noble hardwoods, that have been the target species for many improvement programs developed in Italy, and particularly on wild cherry, where studies on the genetic control of wood traits are rare.

  3. Wood energy and air quality. Synthetic report

    International Nuclear Information System (INIS)


    This report presents and comments some reference data about the current and prospective (2010, 2020) pollutant emissions through wood combustion as a source of energy. It indicates and compares greenhouse gas emissions by the different sources for household, collective and industrial heating (fuel, gas, electricity, pellets, logs, grinds, wood wastes), gives an overview of atmospheric emissions due to biomass combustion. It compares emissions due to wood combustion with respect to the activity sectors and to combustion equipment. It highlights the challenges of the development of the household sector in terms of improvement and renewal of the quality of the burning equipment. It comments the implemented policies which notably aim at reducing the emission of particles, and at defining quality labels

  4. Bamboo and Wood in Musical Instruments (United States)

    Wegst, Ulrike G. K.


    Over centuries and millennia, our ancestors worldwide found the most appropriate materials for increasingly complex acoustical applications. In the temperate climate of Europe, where the instruments of the Western symphony orchestra were developed and perfected, instrument makers still primarily take advantage of the unique property combination and the aesthetic appeal of wood. In all other continents, one material dominates and is frequently chosen for the manufacture of wind, string, and percussion instruments: the grass bamboo. Here, we review from a materials science perspective bamboo's and wood's unique and highly optimized structure and properties. Using material property charts plotting acoustic properties such as the speed of sound, the characteristic impedance, the sound radiation coefficient, and the loss coefficient against one another, we analyze and explain why bamboo and specific wood species are ideally suited for the manufacture of xylophone bars and chimes, flutes and organs, violins and zithers, violin bows, and even strings.

  5. Structural changes in wood during ozonation (United States)

    Ben'ko, E. M.; Manisova, O. R.; Murav'eva, G. P.; Lunin, V. V.


    It is found that ozone treatment of aspen wood leads to changes in its structural characteristics, i.e., its specific surface area and the crystallinity index of cellulose. Using optical microscopy, it is shown that ozonation is accompanied by a decrease in the average size and visible surface of wood particles. The values for the specific area of the outer surface of samples are calculated. The specific surface area available to the enzyme molecules is determined from data on the adsorption of inert protein hemoglobin on wood. It is shown that this value is an order of magnitude higher than that of the outer surface and increases considerably for an ozonized sample. Based on the results from X-ray analysis, it is established that the structure of cellulose is disordered during ozone delignification, as is indicated by a reduction in the crystallinity index and crystallite sizes.


    Directory of Open Access Journals (Sweden)

    Jamaludin Malik


    Full Text Available This research is aimed to assess the characteristics of 3-ply laminated wood assembly incorporating wood waste belonged to three species i.e. bengkal (Nauclea sp., pisang-pisang (Alponsea teysmanii Boerl, and jambu-jambu (Eugenia spp..  The waste was procured from logged natural forests. The used adhesive was tannin-resorcinol formaldehyde.  The lamination experiment was replicated three times. The assessed characteristics were moisture content, density, formaldehyde emission, bonding strength, wood defect, and static bending strength. The resulting 3-ply laminated wood assembly (beam has a moisture content at 4.00 - 13.90%, density 0.30 - 0.68 gram per cm3, and formaldehyde emission 0.323 - 3.199 mg per liter that tended to increase with the decrease in density of the laminated wood.  The bonding strength of the laminated wood ranges varied from 47.14 to 107.52 kg per cm2  (dry testing and 40.76 - 79.57 kg per cm2  (wet testing.  Likewise, wood defect was about 80 - 100% (dry test and 20 - 80% (wet test.  Static bending strength varied from 455.62 - 843.36 kg per cm2 (for MOE and from 35,985.49 to 104,332.63 kg per cm2 (for MOR. Based on these data, the three wood waste species afforded good bending strength and they were suitable for reconstituting material for exterior-type laminated wood beam.

  7. The Statistics of wood assays for preservative retention (United States)

    Patricia K. Lebow; Scott W. Conklin


    This paper covers general statistical concepts that apply to interpreting wood assay retention values. In particular, since wood assays are typically obtained from a single composited sample, the statistical aspects, including advantages and disadvantages, of simple compositing are covered.

  8. A Survey of Wood Protection Chemicals, Tree Killers and Sprayers ...

    African Journals Online (AJOL)

    chemicals used in wood protection (preservation) within Makurdi metropolis. A purposive, non-random sampling was undertaken in Makurdi metropolis to identify wood protection chemicals/tree-killers available in agrochemical stores, ...

  9. Electrodialytic remediation of CCA treated waste wood in pilot scale

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Christensen, Iben Vernegren; Ottosen, Lisbeth M.


    When CCA (Chromated Copper Arsenate) treated wood is removed from service and turns into waste, the contents of Cu, Cr and As is still high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA treated waste wood...... is not allowed in Denmark, instead the wood is to be land filled until new methods for handling the wood are available. Since the amounts of CCA treated wood being removed from service is expected to increase in the years to come, the need of finding alternative handling methods is very relevant. In this present...... study the utility of the method Electrodialytic Remediation was demonstrated for handling of CCA treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low level DC current as the cleaning agent, combines elektrokinetic movement of ions in the wood matrix with the princi...

  10. Method of predicting mechanical properties of decayed wood (United States)

    Kelley, Stephen S.


    A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

  11. Micromechanical modelling of mechanical behaviour and strength of wood

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Qing, Hai


    An overview of the micromechanical theoretical and numerical models of wood is presented. Different methods of analysis of the effects of wood microstructures at different scale levels on the mechanical behaviour, deformation and strength of wood are discussed and compared. Micromechanical models...... of deformation and strength of wood are divided into three groups: cellular models (applied most often to the mesoscale or cell scale analysis of the wood deformation), continuum micromechanics and homogenization based methods, models which consider wood as a composite and are applied mainly to the analysis...... of wood at the microscale (cell wall scale) level and multiscale models. Lattice and composite models, which are used to analyze the damage and fracture of wood, are considered in a separate section. The areas of applicability and strong sides of each approach are discussed. (C) 2008 Elsevier B.V. All...

  12. Wood anatomy of Argyroxiphium (Asteraceae): adaptive radiation and ecological correlations

    International Nuclear Information System (INIS)

    Carlquist, S.


    Wood anatomy shows close correlation with ecology: A. kauense, A. sandwicense (stem), and A. virescens, which occur in dry localities, show xeromorphic wood patterns. The most mesomorphic woods are those of the bog species A. grayanum and root wood of A. sandwicense. The wood of A. caliginis is xeromorphic, despite the bog habitat of the species, a fact explainable if A. caliginis is a recent entrant into the bog habitat Libriform wall thickness appears correlated with habit. Quantitative features of stem woods of Argyroxiphium are comparable to woods ranging from desert to moist montane forest areas in California. The similarities to woods from each Californian habitat are correlative to the relative moisture availability of the respective Hawaiian habitats of the Argyroxiphium species. (author)


    The report summarizes wood stove particle size and chemical composition data gathered to date. [NOTE: In 1995, EPA estimated that residential wood combustion (RWC), including fireplaces, accounted for a significant fraction of national particulate matter with aerodynamic diameter...

  14. 21 CFR 866.2600 - Wood's fluorescent lamp. (United States)


    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2600 Wood's fluorescent lamp. (a) Identification. A Wood's fluorescent lamp is a device intended for medical purposes to detect...

  15. Fatigue testing of wood-concrete composite beams. (United States)


    Currently, wood-concrete composite structural members are usually applied in building structures. There are a relatively small number (in the low 100s) of known bridge applications involving wood-concrete composites. A problem with using these novel ...

  16. Vedinių su priesaga *-mo- raida

    Directory of Open Access Journals (Sweden)

    Saulius Ambrazas


    Full Text Available DEVELOPMENT OF DERIVATIVES WITH THE SUFFIX *-mo-SummaryAdjectives with the suffix *-mo- have been formed from substantives (cf. Lith. tólimas / tólymas and Latv. dial. tuôl’eims ‘distant’; Pruss. *auktimas ‘high’; Skr. agrimá- ‘the first, who is at the head’ and verbs (cf. Lith. dial. ãpsukmas ‘sewn round’, pliùkšmas ‘deflated, limp’; OLith. laimas ‘happy’ and Pruss. etnīstislaims (gnadenreich III 631; Lith. liñksmas and Latv. lìksms ‘merry, gay, joyfull’, Gmc. *werma- ‘warm’, Skr. bhīmá- ‘terrible, frightfull’, Toch. A, B cämpamo- ‘well-to-do, rich’, Hitt. kišamma- ‘combed’ from the Late Proto-Indo-European. The gratest part of them became participles in the Baltic, Slavic and Albanian languages.On the other hand, the use of derivatives with the suffix *-mo- in the position of abstract nouns is also very old, cf. semanticaly concretized and derivationaly indissoluble abstract noun, in herited from Proto-Indo-European, Lith. dmas (dmai, Latv. dũmi, Pruss. dumis (rauch E 39, Slav. *dymъ, Latv. fūmus, Skr. dhūmó- ‘smoke’ and Gk. θῡ‑μός with abstract meaning ‘soal, vitality, passion,    need’ : dhe-/dh-/dhū- ‘blow; breathe; choke; smoke; rush; disperse; whirl, move, stir’.In the East Baltic languages abstract nouns with the derived suffixes, based on *-mo-, became productive, cf. nomina actionis with *-i-mo- in Lithuanian (cf. gyvẽnimas ‘life’ and corresponding derivatives with *-u-mo- in Latvian (cf. ìeradums ‘custom, habit’.

  17. International Trade of Wood Pellets (Brochure)

    Energy Technology Data Exchange (ETDEWEB)


    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  18. Synthesis and cure kinetics of liquefied wood/phenol/formaldehyde resins (United States)

    Hui Pan; Todd F. Shupe; Chung-Yun Hse


    Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three-necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac-type liquefied wood/phenol/...

  19. Spektroskopie a spektroelektrochemie MoS2


    Jurková, Kateřina


    This work deals with studies MoS2 layers prepared by mechanical exfoliation was detected by optical microscopy and the number of layers was determined from AFM measurement. The layers were characterized by Raman spectroscopy in various wavelengths. A spectroelectrochemical cell for the sandwich sample consisting of a MoS2 layer and two layers of graphene with various isotope composition and Raman spectra measurements were performed at voltages from 0.0 V to 0.9 V. A larger shift of the G band...

  20. mo encontrar patentes, setiembre 2010


    Bonich, Mònica; Cervera-Farré, Albert; Santos-Hermosa, Gema


    Com es poden trobar les patents: què són les patents?, què es pot patentar?, qui assigna les patents? i com es poden trobar patents? Cómo encontrar patentes: ¿qué son las patentes?, ¿qué se puede patentar?, ¿quién asigna las patentes? y ¿cómo se pueden encontrar patentes? How to find patents: what are patents?, what can be patented?, who awards the patents? and how can patents be found?

  1. Economics of marketing wood fuel in south western Nigeria




    Marketing of fuel wood is an important source of livelihood for most parts of Nigeria. The study examined the economics of marketing of wood fuel in south western Nigeria with a view to determine the socio-economic characteristics of the marketers, the profitability of marketing wood fuel, the market structure and constraints to profitability. Data for the study were obtained from a total sample of 100 randomly selected wood fuel marketers through interviews schedules and application of struc...

  2. Surfaces foliated by planar geodesics: a model forcurved wood design

    DEFF Research Database (Denmark)

    Brander, David; Gravesen, Jens


    Surfaces foliated by planar geodesics are a natural model for surfaces made from wood strips. We outline how to construct all solutions, and produce non-trivial examples, such as a wood-strip Klein bottle......Surfaces foliated by planar geodesics are a natural model for surfaces made from wood strips. We outline how to construct all solutions, and produce non-trivial examples, such as a wood-strip Klein bottle...

  3. Firing with wood chips in heating and cogeneration plants

    International Nuclear Information System (INIS)

    Kofman, P.D.


    The document was produced for use as detailed teaching material aimed at spreading information on the use of wood chips as fuel for heating and cogeneration plants. It includes information and articles on wood fuels generally, combustion values, chopping machines, suppliers, occupational health hazards connected with the handling of wood chips, measuring amounts, the selection of types, prices, ash, environmental aspects and information on the establishment of a wood-chip fired district heating plant. (AB)

  4. Elevated Temperature Tensile Tests on DU–10Mo Rolled Foils

    Energy Technology Data Exchange (ETDEWEB)

    Schulthess, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)


    Tensile mechanical properties for uranium-10 wt.% molybdenum (U–10Mo) foils are required to support modeling and qualification of new monolithic fuel plate designs. It is expected that depleted uranium-10 wt% Mo (DU–10Mo) mechanical behavior is representative of the low enriched U–10Mo to be used in the actual fuel plates, therefore DU-10Mo was studied to simplify material processing, handling, and testing requirements. In this report, tensile testing of DU-10Mo fuel foils prepared using four different thermomechanical processing treatments were conducted to assess the impact of foil fabrication history on resultant tensile properties.

  5. Wood and Wood-Based Materials as Sensors—A Review of the Piezoelectric Effect in Wood (United States)

    Robert J. Ross; Jiangming Kan; Xiping Wang; Julie Blankenburg; Janet I. Stockhausen; Roy F. Pellerin


    A variety of techniques have been investigated for use in assessing the physical and mechanical properties of wood products and structures. Ultrasound, transverse vibration, and stress-wave based methods are all techniques that have shown promise for many nondestructive evaluation applications. These techniques and others rely on the use of measurement systems to...

  6. Criterion 6, indicator 28 : total and per capita consumption of wood and wood products in round wood equivalents (United States)

    James L. Howard; Rebecca Westby; Kenneth E. Skog


    Total consumption of wood and paper products and fuelwood, in roundwood equivalents, increased between 1965 and 1988 from 13.2 to 18.9 billion cubic feet. Since 1988, it has been about 20 billion cubic feet per year. Total per capita consumption increased between 1965 and 1987, from 68 to 83 ft3 per year. Since 1987 through 2006, per capita...

  7. The biodiversity and biotic integration in the oak-wood of middle Russian partially wooded steppe districts

    Directory of Open Access Journals (Sweden)

    V. I. Reutskaya


    Full Text Available In this article there are givin the problems of biotic integration in the oak-wood of partially wooded steppe destrikts. There was studying the vitality dependens of oaks from their composition diversity.

  8. Calorific values of wood species of Nigerian origin | Kulla | Journal ...

    African Journals Online (AJOL)

    Calorific values of samples of fuel wood and charcoal from nine different wood species were determined by using a bomb calorimeter. The wood species azadritcha indica and cassia siamea had the highest calorific values of 358.0 and 300.6 kJ/kg respectively, while the charcoals of poliostigma thonningii, anageissus ...

  9. Nigerian Wood Waste: A Potential Resource for Economic ...

    African Journals Online (AJOL)

    Nigerian Wood Waste: A Potential Resource for Economic Development. ... Journal of Applied Sciences and Environmental Management ... wood waste as a viable resource for economic growth and sustainable development and thereby pique the people's interest in the proper management and harnessing of wood waste.

  10. Environmental Degradation of Fiber-Reinforced Polymer Fasteners in Wood (United States)

    Samuel L. Zelinka; Douglas R. Rammer


    This paper examines the durability of fiber-reinforced polymer (FRP) nails in treated wood. The FRP nails were exposed to four conditions: (1) accelerated weathering, consisting of exposure to ultraviolet light and condensation; (2) 100% relative humidity (RH); (3) being driven into untreated wood and exposed to 100% RH; and (4) being driven into wood treated with...

  11. Engineering economic assessment of residential wood heating in NY (United States)

    We provide insight into the recent resurgence in residential wood heating in New York by: (i) examining the lifetime costs of outdoor wood hydronic heaters (OWHHs) and other whole-house residential wood heat devices,(ii) comparing these lifetime costs with those of competing tech...

  12. Supply and demand of timber for wood turning in Maine (United States)

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell


    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  13. Supply and demand for wood: a worldwide perspective? (United States)

    Sally. Duncan


    In a unique effort to compare and contrast differing views on future supply and demand for wood, a study found that demand for wood will increase, but there is no evidence of a crisis at the world scale. Opportunities to increase wood production, however, are limited and trade-offs among competing uses of forests are inevitable. A complex of factors determine supply...

  14. Tolerance of Serpula lacrymans to copper-based wood preservatives (United States)

    Anne Christine Steenkjaer Hastrup; Frederick Green; Carol A. Clausen; Bo Jensen


    Serpula lacrymans, the dry rot fungus, is considered the most economically important wood decay fungus in certain temperate regions of the world, namely northern Europe, Japan, and Australia. Previously, copper-based wood preservatives were commonly used for pressure treatment of wood for building construction, but some decay fungi are known to be copper tolerant. In...

  15. Purdue Plane Structures Analyzer II : a computerized wood engineering system (United States)

    S. K. Suddarth; R. W. Wolfe


    The Purdue Plane Structures Analyzer (PPSA) is a computer program developed specifically for the analysis of wood structures. It uses recognized analysis procedures, in conjunction with recommendations of the 1982 National Design Specification for Wood Construction, to determine stresses and deflections of wood trusses and frames. The program offers several options for...

  16. Biomass is beginning to threaten the wood-processors

    International Nuclear Information System (INIS)

    Beer, G.; Sobinkovic, B.


    In this issue an exploitation of biomass in Slovak Republic is analysed. Some new projects of constructing of the stoke-holds for biomass processing are published. The grants for biomass are ascending the prices of wood raw material, which is thus becoming less accessible for the wood-processors. An excessive wood export threatens the domestic processors

  17. Mechanism of Transport Through Wood Cell Wall Polymers (United States)

    Joseph E. Jakes; Nayomi Plaza; Donald S. Stone; Christopher G. Hunt; Samuel V. Glass; Samuel L. Zelinka


    The movement of chemicals through wood is necessary for decay and fastener corrosion to occur in forest products. However, the mechanism responsible for the onset of fastener corrosion and decay in wood is not known. The onset occurs before the formation of free water in wood cavities and aqueous chemical transport would be possible. Here, we propose that the onset...

  18. A new method of determining moisture gradient in wood (United States)

    Zhiyong Cai


    Moisture gradient in wood and wood composites is one of most important factors that affects both physical stability and mechanical performance. This paper describes a method for measuring moisture gradient in lumber and engineering wood composites as it varies across material thickness. This innovative method employs a collimated radiation beam (x rays or [gamma] rays...

  19. Chapter 23: Corrosion of Metals in Wood Products (United States)

    Samuel L. Zelinka


    The corrosion of metals in contact with wood has been studied for over 80 years, and in most situations wood is not corrosive [1]. Recently, however, the durability of fasteners in preservative--treated wood has become a concern. Changes in legislation and certification in the United States, the European Union, and Australasia have restricted the use of chromated...

  20. 30 CFR 77.1913 - Fire-resistant wood. (United States)


    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fire-resistant wood. 77.1913 Section 77.1913 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... Shaft Sinking § 77.1913 Fire-resistant wood. Except for crossties, timbers, and other wood products...

  1. Global Wood Pellet Industry and Trade Study 2017

    NARCIS (Netherlands)

    Thrän, D.; Peetz, D.; Schaubach, K.; Mai-Moulin, T.; Junginger, H.M.; Lamers, P.; Visser, L.


    The report Global Wood Pellet Industry Market published in 2011 has always been the most downloaded document of IEA Bioenergy Task 40. We have decided to update the report and bring new insights on market trends and trade of the global wood pellets. The global wood pellet market has increased

  2. Considerations in recycling of wood-plastic composites (United States)

    J.E. Winandy; N.M. Stark; C.M. Clemons


    Wood-plastic composite decking has made major advances in material performance, processing and user acceptance. The growth of wood-plastic composite decking in North America has grown from less than 1 % in mid- 0's to over 10% today with growth projected by several studies to reach +20% before the end of this decade (2010). Preservative-treated wood decking...

  3. Innovations in Wood Protection in the age of Nanotechnology (United States)

    Carol A. Clausen


    Advances in wood protection based on nanotechnology are being developed to improve resistance of wood products to biodeterioration, reduce environmental impacts from chemical leaching and resist UV degradation of in-service wood. A number of different approaches have been explored. First, the nanometals zinc oxide and copper oxide were evaluated as preservative...

  4. Advanced wood- and bio-composites : enhanced performance and sustainability (United States)

    Jerrold E. Winandy


    Use of wood-based-composites technology to create value-added commodities and traditional construction materials is generally accepted worldwide. Engineered wood- and lignocellulosic-composite technologies allow users to add considerable value to a diverse number of wood- and lignocellulosic feedstocks including small-diameter timber, fast plantation-grown timber,...

  5. Still rethinking the value of high wood density. (United States)

    Larjavaara, Markku; Muller-Landau, Helene C


    In a previous paper, we questioned the traditional interpretation of the advantages and disadvantages of high wood density (Functional Ecology 24: 701-705). Niklas and Spatz (American Journal of Botany 97: 1587-1594) challenged the biomechanical relevance of studying properties of dry wood, including dry wood density, and stated that we erred in our claims regarding scaling. We first present the full derivation of our previous claims regarding scaling. We then examine how the fresh modulus of rupture and the elastic modulus scale with dry wood density and compare these scaling relationships with those for dry mechanical properties, using almost exactly the same data set analyzed by Niklas and Spatz. The derivation shows that given our assumptions that the modulus of rupture and elastic modulus are both proportional to wood density, the resistance to bending is inversely proportional to wood density and strength is inversely proportional with the square root of wood density, exactly as we previously claimed. The analyses show that the elastic modulus of fresh wood scales proportionally with wood density (exponent 1.05, 95% CI 0.90-1.11) but that the modulus of rupture of fresh wood does not, scaling instead with the 1.25 power of wood density (CI 1.18-1.31). The deviation from proportional scaling for modulus of rupture is so small that our central conclusion remains correct: for a given construction cost, trees with lower wood density have higher strength and higher resistance to bending.

  6. 7 CFR 2902.42 - Wood and concrete sealers. (United States)


    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Wood and concrete sealers. 2902.42 Section 2902.42... Items § 2902.42 Wood and concrete sealers. (a) Definition. (1) Products that are penetrating liquids formulated to protect wood and/or concrete, including masonry and fiber cement siding, from damage caused by...

  7. Harvested wood products : basis for future methodological development (United States)

    Kenneth E. Skog


    The IPCC Guidelines (IPCC 1997) provide an outline of how harvested wood could be treated in national greenhouse gas (GHG) inventories. This section shows the relation of that outline to the approaches and estimation methods to be presented in this Appendix. Wood and paper products are referred to as harvested wood products (HWP). It does not include carbon in...

  8. Industrial wood productivity in the United States, 1900-1998 (United States)

    Peter J. Ince


    The productivity of U.S. wood and paper product output in terms of wood input is computed and displayed in graphs. Background tables provide supporting data. The productivity trend parallels trends in the recovered paper utilization rate. Recycling and wood residue use are key factors in productivity gains.

  9. Volatile organic compound emissions from engineered wood products (United States)

    Steve Zylkowski; Charles Frihart


    Thirteen bonded engineered wood products representing those commonly used in building construction were evaluated for volatile organic chemicals using methods developed for interior bonded wood products. Although formaldehyde and acetaldehyde were emitted from all samples, they were not the dominant volatiles, which greatly depended on wood species and bonding...

  10. Southern Exports of Wood Products 1968-80 (United States)

    Harold W. Wisdom; James E. Granskog; R. J. Peeler


    Exports of wood products from the South have risen sharply since the mid 1970's. Lumber shipments are the largest export group, while panel products have exhibited the fastest growth. Hardwood logs, wood chips, and prefabricated wooden structures have been the primary contributors to the growth of roundwood and miscellaneous wood product exports. Western Europe...

  11. Primary wood-product industries of southern New England - 1971 (United States)

    James T. Bones


    The results of a complete canvass of the primary wood manufacturers in southern New England. The report contains data about wood production and receipts for the states of the region. Comparisons are made with a similar 1952 survey and trends in industrial wood output are noted.

  12. The wood anatomy of Gardenieae, Ixoreae and Mussaendeae (Rubiaceae)

    NARCIS (Netherlands)

    Koek-Noorman, Jifke


    The tribe Gardenieae in the restricted delimitation proposed by Bremekamp and Verdcourt is wood anatomically homogeneous. The genera of the Ixoreae studied by me also agree with each other in wood structure. Within the tribe Mussaendeae in the delimitation accepted by Schumann the wood anatomy shows

  13. Cement bonded wood wool boards from podocarpus spp. for low ...

    African Journals Online (AJOL)

    ... sound insulation in walls, ceilings and floors, roofs, sound barriers and thermal insulation. Further research is required to investigate the use of different wood species and different mineral binders. Keywords: podocarpus spp, wood-wool, wood-cement composites. Journal of Civil Engineering Research and Practice Vol.

  14. The potential of wood-based composite poles (United States)

    Todd F. Shupe; Cheng Piao; Chung Y. Hse


    Wood-based composite utility poles are receiving increasing attention in the North American pole market. This interest is being driven by many increasing factors such as increasing: (1) disposal costs of solid wood poles, (2) liability and environmental concerns with traditional means of disposal of solid wood poles, (3) cost and concerns of long-term...

  15. Insect-mediated nitrogen dynamics in decomposing wood (United States)

    Michael D. Ulyshen


    1.Wood decomposition is characterised by complex and poorly understood nitrogen (N) dynamics with unclear implications for forest nutrient cycling and productivity.Wood-dwelling microbes have developed unique strategies for coping with the N limitations imposed by their substrate, including the translocation of N into wood by cord-forming fungi and the fixation of...

  16. Understanding extractive bleed : wood extractives: distribution, properties, and classes (United States)

    Edward Burke; Norm Slavik; Tony Bonura; Dennis Connelly; Tom Faris; Arnie Nebelsick; Brent Stuart; Sam Williams; Alex C. Wiedenhoeft


    Color, odor, and natural durability of heartwood are characteristics imparted by a class of chemicals in wood known collectively extractives. Wood is converted by the tree from sapwood to heartwood by the deposition of extractives, typically many years after the growth ring undergoing this change was formed by the tree. Extractives are thus not a part of the wood...

  17. Influence of wood defects on some mechanical properties of two ...

    African Journals Online (AJOL)

    Effects of slope of wood grain, knot, split, ingrowth and sapwood on some mechanical wood properties of Pterygota macrocarpa (Kyere) and Piptadeniastrum africanum (Dahoma) have been studied, using structural size specimens and a 60 tonne structural wood testing machine. The study on the two tropical hardwoods ...

  18. Characterizing phenolformaldehyde adhesive cure chemistry within the wood cell wall (United States)

    Daniel J. Yelle; John Ralph


    Adhesive bonding of wood using phenol-formaldehyde remains the industrial standard in wood product bond durability. Not only does this adhesive infiltrate the cell wall, it also is believed to form primary bonds with wood cell wall polymers, particularly guaiacyl lignin. However, the mechanism by which phenol-formaldehyde adhesive intergrally interacts and bonds to...

  19. Molecular Dissection of Xylan Biosynthesis During Wood Formation in Poplar (United States)

    Xylan, being the second most abundant polysaccharide in dicot wood, is considered to be one of the factors contributing to wood biomass recalcitrance for biofuel production. To better utilize wood as biofuel feedstock, it is crucial to functionally characterize all the genes invo...

  20. Studies of properties of rubber wood with impregnation of polymer

    Indian Academy of Sciences (India)


    checked and found to be improved by incorporation of GMA as the crosslinker with styrene. The polymer- impregnated wood has also been characterized by FTIR spectroscopy and DSC. Keywords. Wood; composite; crosslinker; polymers; styrene–glycidyl methacrylate. 1. Introduction. Wood, a renewable resource and ...

  1. 7 CFR 160.8 - Steam distilled wood turpentine. (United States)


    ... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation from... 7 Agriculture 3 2010-01-01 2010-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8...

  2. Theoretical modeling and experimental analyses of laminated wood composite poles (United States)

    Cheng Piao; Todd F. Shupe; Vijaya Gopu; Chung Y. Hse


    Wood laminated composite poles consist of trapezoid-shaped wood strips bonded with synthetic resin. The thick-walled hollow poles had adequate strength and stiffness properties and were a promising substitute for solid wood poles. It was necessary to develop theoretical models to facilitate the manufacture and future installation and maintenance of this novel...

  3. Characterization of liquefied wood residues from different liquefaction conditions (United States)

    Hui Pan; Todd f. Shupe; Chung-Yun Hse


    The amount of wood residue is used as a measurement of the extent of wood liquefaction. Characterization of the residue from wood liquefaction provides a new approach to understand some fundamental aspects of the liquefaction reaction. Residues were characterized by wet chemical analyses, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and...

  4. Spatial and temporal price variations of sawn wood utilized for ...

    African Journals Online (AJOL)

    O Y Ogunsanwo

    sawn timber to the gross in-efficiency of sawn-wood pricing should also be prevented. Keywords: Sawn-wood ... Thus the furniture industry is an important sector of the Nigeria economy in terms of annual wood ... pricing system in Nigeria is inefficient; while the forest product market is bereft of good performance due to the ...

  5. Direct current testing to measure corrosiveness of wood preservatives (United States)

    Samuel L. Zelinka; Douglas R. Rammer; Donald S. Stone; James T. Gilbertson


    A qualitative test that mimics the corrosion behaviour of metals in contact with treated wood without using wood specimens would be of great value in rapidly evaluating the corrosiveness of new wood preservatives. The objective of this study was to determine whether the linear polarisation resistance of metals immersed in a solution of preservative chemicals is related...

  6. Flavanoid biocides: Wood preservatives based on condensed tannins (United States)

    Peter Laks; Peggy A. McKaig; Richard W. Hemingway


    The condensed tannins are natural wood preservatives found in high concentrations in the bark and wood of some tree species. Condensed tannin-containing bark extracts from loblolly pine (Pinus taeda) were evaluated as wood preservatives using standard methods. Bark extracts by themselves did not cause any reduction in weight loss of pressure-treated...

  7. Adhesive Penetration of Wood and Its Effect on Bond Strength (United States)

    Charles R. Frihart


    Woodworkers know that wood is porous in that adhesive flows into lumens for a mechanical interlock (1) and that wood absorbs water, allowing the use of water-borne adhesives. However, the anatomical aspects of wood that lend to its porosity are much more complicated and have a greater influence on adhesive performance than is normallyrealized or discussed. This...

  8. Determination of crystallization as a function of Mo layer thickness in Mo/Si multilayers

    DEFF Research Database (Denmark)

    Abdali, Salim; Gerward, Leif; Yakshin, A.E.


    information on the crystalline phases, average size and crystallite formation. Comparison of these parameters for the samples examined provided novel results, especially regarding the in-plane and in-depth average sizes of the crystallites. The most important result is that crystallization takes place already......Mo/Si multilayer samples with different Mo layer thickness were deposited by electron beam evaporation, while Kr+ ions (300 eV) were used for polishing the Si layers. Crystallization as a function of the Mo layer thickness deposited was investigated by grazing incidence X-ray diffraction, giving...

  9. Isothermal and Two-Temperature Zone Selenization of Mo Layers

    Directory of Open Access Journals (Sweden)

    L. Kaupmees


    Full Text Available Glass/Mo, Mo foil, glass/Mo/In, and glass/Mo/Cu stacked layers were selenized in closed vacuum tubes by isothermal and/or two-temperature zone annealing in Se vapors. The selenization process was studied dependent on Se vapor pressure, temperature and time. Samples were selenized from 375 to 580°C for 30 and 60 minutes. The applied Se pressure was varied between 130 and 4.4⋅103 Pa. The increase of MoSe2 film thickness was found to depend on the origin of Mo. MoSe2 thickness dL on Mo-foil was much higher than on sputtered Mo layers, and it depended linearly on time and as a power function dL~PSe1/2 on Se vapor pressure. The residual oxygen content in the formed MoSe2 layers was much lower in the two-zone selenization process. If Mo was covered with Cu or In before selenization, these were found to diffuse into formed MoSe2 layer. All the MoSe2 layers showed p-type conductivity.

  10. Van de Graaff Experiments: Mo Redox Chemistry and Iodine Speciation

    Energy Technology Data Exchange (ETDEWEB)

    Youker, A. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Krebs, J. F. [Argonne National Lab. (ANL), Argonne, IL (United States); Hebden, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Quigley, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Stepinski, D. [Argonne National Lab. (ANL), Argonne, IL (United States); Vandegrift, G. F. [Argonne National Lab. (ANL), Argonne, IL (United States)


    Argonne National Laboratory (Argonne) is assisting Morgridge Institute for Research (MIR) in its efforts to develop SHINE, which is an accelerator-driven process that will use a uranyl-sulfate solution for the production of Mo-99. Mo will be separated from an irradiated uranyl-sulfate solution using a titania sorbent; however, the highly reducing environment may lead to Mo reduction. If Mo is reduced to Mo(IV) or Mo(V), its adsorption and/or recovery will decrease, and an oxidizing agent will be required to ensure that Mo is present as Mo(VI). Another concern for SHINE is related to the speciation of iodine during irradiation, cooling, column loading and stripping, and Mo-99 purification. Both Mo oxidation state and iodine speciation experiments were performed using a Van de Graaff generator as a source of radiation. Initial results indicate that Mo may be reduced during irradiation because low Mo recoveries were obtained for three separate column experiments performed using irradiated solutions. The results were complicated, however, because nearly 60 min passed between the end of irradiation and the initiation of column experiments, and high back pressures were observed for two out of the three experiments. This also made it difficult to determine what variable caused low Mo recovery. Radiation dose and starting iodine species had no effect on overall iodine speciation, and iodide was the predominant species for all tests.

  11. Corrosion of metals in wood : comparing the results of a rapid test method with long-term exposure tests across six wood treatments (United States)

    Samuel L. Zelinka; Donald S. Stone


    This paper compares two methods of measuring the corrosion of steel and galvanized steel in wood: a long-term exposure test in solid wood and a rapid test method where fasteners are electrochemically polarized in extracts of wood treated with six different treatments. For traditional wood preservatives, the electrochemical extract method correlates with solid wood...

  12. Wood energy x 2 - Scenario for the development of wood energy use in Switzerland

    International Nuclear Information System (INIS)


    This study for the Swiss Agency for the Environment, Forests and Landscapes (SAEFL) and the Swiss wood-energy association (Holzenergie Schweiz) presents the results of a scenario-study that examined if, and under what conditions, doubling the use of wood energy in Switzerland could help reach carbon dioxide reduction targets. Two scenarios are presented that are based on high and low rates of growth for the number of automatic wood-chipping or pellets-fired installations. For both scenarios, figures are presented on the amount of wood used and the heating energy generated. The political and financial prerequisites for the scenarios are discussed and other boundary conditions are defined. The report draws conclusions from the study of the two scenarios and summarises the political action deemed necessary

  13. How Much Wood Would Wood Waste Waste if None Were Used for Fuel? (United States)

    Franklin, Ben A.


    The recent trend in using wood for energy is examined with new developments for gaining greater efficiency from an old source. The threat of deforestation is acknowledged and discussed, particularly in relation to Appalachia. (KR)

  14. Environmental impact assessment of wood ash utilization in forest road construction and maintenance--A field study. (United States)

    Oburger, Eva; Jäger, Anna; Pasch, Alexander; Dellantonio, Alex; Stampfer, Karl; Wenzel, Walter W


    The ever increasing use of wood material as fuel for green energy production requires innovative, environmentally safe strategies for recycling of the remaining wood ash. Utilizing wood ash in forest road construction and maintenance to improve mechanical stability has been suggested as a feasible recycling option. To investigate the environmental impact of wood ash application in forest road maintenance, a two-year field experiment was conducted at two Austrian forest sites (Kobernausserwald (KO) (soil pH 5.5) and Weyregg (WE) (pH 7.7)) differing in their soil chemical properties. Two different ashes, one produced by grate incineration (GA) and the other by fluidized bed incineration in a mixture with 15 vol% burnt lime (FBA), were incorporated in repeated road sections at a 15:85% (V/V) ash-to-soil rate. Leaching waters from the road body were collected and analyzed for 32 environmentally relevant parameters over two years. Upon termination of the experiment, sub-road soil samples were collected and analyzed for ash-related changes in soil chemistry. Even though a larger number of parameters was affected by the ash application at the alkaline site (WE), we observed the most pronounced initial increases of pH as well as Al, As, Fe, Mn, Ni, Co, Cu, Mo, and NO2(−) concentrations in leachates beneath GA-treated road bodies at Kobernausserwald due to the lower soil buffer capacity at this site. Despite the observed effects our results indicate that, when specific requirements are met (i.e. appropriate ash quality, sufficient soil buffer capacity below the road body, and single time-point ash incorporation within several decades), wood ash application in forest road construction is generally environmentally acceptable.

  15. Ventilation system for 99Mo production apparatus

    International Nuclear Information System (INIS)

    Izumo, Mishiroku; Okane, Shougo; Sorita, Takami; Aoyama, Saburou


    In production of 20 Ci 99 Mo from 235 U fission, about 120 Ci of radioiodine ( 131 I, 132 I, and 133 I) is involved. To remove airborne radioiodine from the exhaust air from production apparatus and minimize radioiodine release to the atmosphere, the ventilation system is equipped with 2 units of Model-FD charcoal filter (KI 3 -Impregnated charcoal 2 inch thick of Barnebey-Cheney Co.). From September 1976 to December 1977, 21 runs of 99 Mo production involving airborne radioiodine were carried out. The ventilation system was operated continuously for the whole 15 months period; variation in removal efficiency of airborne radioiodine from the exhaust air stream was observed. In the runs valuable experiences were gained in operation and maintenance of the ventilation system including activated charcoal filter and health-physics management of such facility. Following are the results: (1) Airborne radioiodine from 99 Mo production apparatus is reduced to 10 -3 % of the original quantity. (2) When the ventilation system is operated at a maximum air flow rate through the filter, the average efficiency during 15 months is over 98%. (3) Airborne radioiodine released from 99 Mo production apparatus to the ventilation system is less than 5% particulate iodine and alkyl iodines and more than 95% inorganic iodine. (4) Airborne radioiodine released from the stack is less than 28 μCi/run, which is below the limit in regulations on Radioisotope Production Laboratory. (auth.)

  16. Interface roughness in Mo/Si multilayers

    International Nuclear Information System (INIS)

    Nedelcu, I.; Kruijs, R.W.E. van de; Yakshin, A.E.; Tichelaar, F.; Zoethout, E.; Louis, E.; Enkisch, H.; Muellender, S.; Bijkerk, F.


    In this work we present a study of surface roughness development at the molybdenum-on-silicon and silicon-on-molybdenum interfaces in Mo/Si multilayers as employed in Extreme UV lithography. Thin Mo/Si multilayers, with layer thicknesses of 3-5 nm, were deposited using electron beam evaporation. The effect of ion treatment on the surface roughness was studied by X-ray reflectometry and transmission electron microscopy. Without ion treatment we observed build up of correlated roughness. The roughness development is shown here to depend strongly on the thickness of the crystalline Mo layer. Independent of the Mo ratio in a period, we show that a minimal amount of ion treatment is required to smoothen the multilayer roughness, which is also confirmed by EUV reflectivity measurements. At high ion energies the layers become smoother due to a larger ion penetration depth. The higher penetration depth is also shown to initiate additional interdiffusion and structural changes at buried interfaces

  17. Teens join the MoEDAL collaboration

    CERN Multimedia

    Stephanie Hills


    The principal investigator for any institute joining an experimental collaboration is generally a self-assured researcher with evident leadership skills and an in-depth knowledge of their subject gained over many years. Katherine Evans fits the brief in every respect, except that she is 17 years old and her research institute is the Langton Star Centre, based at the Simon Langton Grammar School for Boys. The school has just joined the MoEDAL experiment.   Teacher Becky Parker (left) with two students from the Simon Langton Grammar School for Boys in the MoEDAL experimental area. MoEDAL, the latest LHC experiment has detectors located close to the interaction point of the LHCb experiment. This new experiment is designed to search for the highly ionizing avatars of new physics at the LHC, specifically the magnetic monopole or dyon and other highly ionizing stable massive particles from a number of beyond-the-Standard-Model scenarios. MoEDAL was approved in 2010 and is due to start taking data i...

  18. Nanostructured Mo-B-C coatings

    Czech Academy of Sciences Publication Activity Database

    Buršík, Jiří; Buršíková, V.; Souček, P.; Zábranský, L.; Vašina, P.


    Roč. 68, č. 3 (2016), s. 1069-1075 ISSN 1841-8759 R&D Projects: GA ČR(CZ) GA15-17875S Institutional support: RVO:68081723 Keywords : magnetron sputtering * Mo-B-C coating * microstructure Subject RIV: JI - Composite Materials

  19. Mo-99 from low-enriched uranium

    International Nuclear Information System (INIS)

    Cols, Hector J.; Cristini, Pablo R.; Manzini, Alberto C.


    The use of low-enriched uranium aluminide targets for the production of fission Mo-99 is presented. Former tests on uranium silicide targets are also reviewed. Tests of dissolution of aluminide miniplates in alkaline medium were performed, showing interesting results for the replacement of current HEU targets. (author)

  20. Relationships between wood functions in the living tree and wood industrial qualities : What can we learn from tree biomechanical research ?


    Fournier, Meriem; Dlouha, Jana; Ruelle, Julien; Constant, Thiery; Rathgeber, Cyrille; Almeras, Tancrede


    In order to predict wood technological properties in the context of growth and yield studies, wood variations have been investigated by forest science from several decades. Typical patterns have been defined concerning the effects of cambial age or tree ring width on some wood structural, physical or mechanical properties, in wide ranges of genotypes and site conditions