WorldWideScience

Sample records for lens storage case

  1. Bacterial transmission from lens storage cases to contact lenses - Effects of lens care solutions and silver impregnation of cases

    NARCIS (Netherlands)

    Vermeltfoort, Pit B. J.; Hooymans, Johanna M. M.; Busscher, Henk J.; van der Mei, Henny C.

    2008-01-01

    The killing efficacies of multipurpose lens care solutions on planktonic and biofilm bacteria grown in polypropylene contact lens storage cases with and without silver impregnation and effects on bacterial transmission from storage cases to silicone hydrogel contact lenses were investigated. For tra

  2. Bacterial Bioburden Decrease in Orthokeratology Lens Storage Cases After Forewarning: Assessment by the DNA Dot Hybridization Assay.

    Science.gov (United States)

    Fang, Po-Chiung; Lo, Jung; Chang, Tsung C; Chien, Chun-Chih; Hsiao, Chang-Chun; Tseng, Shin-Ling; Lai, Yu-Hsuan; Kuo, Ming-Tse

    2017-05-01

    The aim of this study was to measure the changes in the bacterial bioburden in orthokeratology (OK) lens storage cases using the DNA dot hybridization assay (DHA) after forewarning patients about their bacterial contamination severity. Thirty-one OK lens wearers were prospectively enrolled in this study. Dot hybridization assay was used for serial measurements of bacterial bioburden in OK storage cases after lenses had been soaked for approximately 6 hr. After the first assessment, the lens wearers were informed of the extent of case contamination and the possible risk of microbial keratitis (MK), and best practices for lens care and lens case hygiene were reviewed and reinforced. A second assessment by the same DHA method was performed after approximately 6 months. Two universal bacterial probes confirmed a significant decrease in bacterial bioburden at the second assessment (P<0.01 and P<0.001). Genus-specific probes showed significant reductions in Acinetobacter and Klebsiella (P=0.02 and P=0.01), but not in Pseudomonas (P=0.42). Making OK lens wearers aware of the bacterial bioburden in their lens cases resulted in improved quality of case care and reduced bioburden. Our results suggest that a strategy of bioburden assessment with forewarning could be a useful method to decrease the incidence of OK-related MK.

  3. Genetic analyses of Acanthamoeba isolates from contact lens storage cases of students in Seoul, Korea.

    Science.gov (United States)

    Yu, H S; Choi, K H; Kim, H K; Kong, H H; Chung, D I

    2001-06-01

    We conducted both the small subunit ribosomal DNA (SSU rDNA) polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) and mitochondrial (mt) DNA RFLP analyses for a genetic characterization of Acanthamoeba isolates from contact lens storage cases of students in Seoul, Korea. Twenty-three strains of Acanthamoeba from the American Type Culture Collection and twelve clinical isolates from Korean patients were used as reference strains. Thirty-nine isolates from contact lens storage cases were classified into seven types (KA/LS1, KA/LS2, KA/LS4, KA/LS5, KA/LS7, KA/LS18, KA/LS31). Four types (KA/LS1, KA/LS2, KA/LS5, KA/LS18) including 33 isolates were regarded as A. castellanii complex by riboprints. KA/LS1 type was the most predominant (51.3%) in the present survey area, followed by KA/LS2 (20.9%), and KA/LS5 (7.7%) types. Amoebae of KA/LS1 type had the same mtDNA RFLP and riboprint patterns as KA/E2 and KA/E12 strains, clinical isolates from Korean keratitis patients. Amoebae of KA/LS2 type had the identical mtDNA RFLP patterns with A. castellanii Ma strain, a corneal isolate from an American patient as amoebae of KA/LS5 type, with KA/E3 and KA/E8 strains from other Korean keratitis patients. Amoebae of KA/LS18 type had identical patterns with JAC/E1, an ocular isolate from a Japanese patient. Three types, which remain unidentified at species level, were not corresponded with any clinical isolate in their mtDNA RFLP and riboprint patterns. Out of 39 isolates analyzed in this study, mtDNA RFLP and riboprint patterns of 33 isolates (84.6%) were identical to already known clinical isolates, and therefore, they may be regarded as potentially keratopathogenic. These results suggest that contact lens wearers in Seoul should pay more attention to hygienic maintenance of contact lens storage cases for the prevention of Acanthamoeba keratitis.

  4. Identification and susceptibility to multipurpose disinfectant solutions of bacteria isolated from contact lens storage cases of patients with corneal infiltrative events.

    Science.gov (United States)

    Kilvington, Simon; Shovlin, Joseph; Nikolic, Marina

    2013-12-01

    Corneal infiltrative events (CIEs) are being reported with increasing frequency in lens wearers and may be related to specific multipurpose disinfecting solution (MPDS), contact lens type or bacterial bio-burden. Here, the efficacy of MPDS's against bacteria from contact lens storage cases (CLSC) of patients with CIEs was investigated. Eighteen CLSC from patients with CIEs were cultured. All reported using the same MPDS based on PQ-1+Aldox+nonanoyl-EDTA prior to experiencing CIEs. Bacteria were identified and tested for sensitivity to MPDS-1 and three other MPSDs. 16/18 CLSC (89%) contained bacterial counts of ≥10(4)-10(8)/mL. Achromobacter spp. was most frequently identified and was found in 11/18 cases (61%). This was followed by 4/18 (22%) Stenotrophomonas maltophilia, 3/18 (17%) Serratia marcescens, 3/18 (17%) Delftia spp., 2/18 (11%) Elizabethkingia spp., 2/18 (11%) Chryseobacterium indologenes and 1/18 Sphingobacterium spiritivorum. Acanthamoeba was not isolated. All of the Achromobacter strains were resistant to MPDS-1 with CIEs in contact lens wearers remain unclear. However, the presence of significant bio-burden in the contact lens storage case and lens may initiate an immunological response resulting in CIEs either directly or through the release of endotoxins (e.g. lipopolysaccharides) from the bacterial outer cell membrane.

  5. Mitochondrial DNA restriction fragment length polymorphism (RFLP) and 18S small-subunit ribosomal DNA PCR-RFLP analyses of Acanthamoeba isolated from contact lens storage cases of residents in southwestern Korea.

    Science.gov (United States)

    Kong, Hyun-Hee; Shin, Ji-Yeol; Yu, Hak-Sun; Kim, Jin; Hahn, Tae-Won; Hahn, Young-Ho; Chung, Dong-Il

    2002-04-01

    We applied ribosomal DNA PCR-restriction fragment length polymorphism (RFLP) and mitochondrial DNA (mtDNA) RFLP analyses to 43 Acanthamoeba environmental isolates (KA/LH1 to KA/LH43) from contact lens storage cases in southwestern Korea. These isolates were compared to American Type Culture Collection strains and clinical isolates (KA/E1 to KA/E12) from patients with keratitis. Seven riboprint patterns were seen. To identify the species of the isolates, a phylogenetic tree was constructed based on the comparison of riboprint patterns with reference strains. Four types accounted for 39 of the isolates belonging to the A. castellanii complex. The most predominant (48.8%) type was A. castellanii KA/LH2 type, which had identical riboprint and mtDNA RFLP patterns to those of A. castellanii Castellani, KA/E3 and KA/E8. The riboprint and mtDNA RFLP patterns of the KA/LH7 (20.9%) type were identical to those of A. castellanii Ma, a corneal isolate from the United States. The riboprint and mtDNA RFLP patterns of the KA/LH1 (18.6%) type were the same as those of A. lugdunensis L3a, KA/E2, and KA/E12. The prevalent pattern for each type of Acanthamoeba in southwestern Korea was very different from that from southeastern Korea and Seoul, Korea. It is noteworthy that 38 (88.4%) out of 43 isolates from contact lens storage cases of the residents in southwestern Korea revealed mtDNA RFLP and riboprint patterns identical to those found for clinical isolates in our area. This indicates that most isolates from contact lens storage cases in the surveyed area are potential keratopathogens. More attention should be paid to the disinfection of contact lens storage cases to prevent possible amoebic keratitis.

  6. Forensic Analysis of a Contact Lens in a Murder Case.

    Science.gov (United States)

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations. © 2016 American Academy of Forensic Sciences.

  7. The binary gravitational lens and its extreme cases

    NARCIS (Netherlands)

    Dominik, M

    1999-01-01

    The transition of the binary gravitational lens from the equal mass case to small (planetary) mass ratios q is studied. It is shown how the Limit of a (pure shear) Chang-Refsdal lens is approached, under what conditions the Chang-Refsdal approximation is valid, and how the 3 different topologies of

  8. Force analysis of bacterial transmission from contact lens cases to corneas, with the contact lens as the intermediary

    NARCIS (Netherlands)

    Qu, Wen-wen; Hooymans, Johanna MM; de Vries, Jacob; van der Mei, Henderina; Busscher, Hendrik

    2011-01-01

    PURPOSE. To determine the probability of transmission of a Staphylococcus aureus strain from a contact lens case, to the contact lens (CL) surfaces, to the cornea, on the basis of bacterial adhesion forces measured by using atomic force microscopy (AFM). METHODS. Adhesion forces between S. aureus st

  9. Bacterial Adhesion Forces to Ag-Impregnated Contact Lens Cases and Transmission to Contact Lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Busscher, Henk J.; van der Mei, Henny C.; Hooymans, Johanna M. M.

    2013-01-01

    Purpose: To measure adhesion forces of Pseudomonas aeruginosa, Staphylococcus aureus, and Serratia marcescens to a rigid contact lens (CL), standard polypropylene, and Ag-impregnated lens cases using atomic force microscopy and determine bacterial transmission from lens case to CL. Methods: Adhesion

  10. Eye lens membrane junctional microdomains: a comparison between healthy and pathological cases

    Energy Technology Data Exchange (ETDEWEB)

    Buzhynskyy, Nikolay; Scheuring, Simon [Institut Curie, Equipe Inserm Avenir, UMR168-CNRS, 26 Rue d' Ulm, 75248 Paris Cedex 05 (France); Sens, Pierre [ESPCI, CNRS-UMR 7083, 75231 Paris (France); Behar-Cohen, Francine, E-mail: simon.scheuring@curie.fr [UMRS Inserm 872, Universite Paris Descartes, Centre de Recherches des Cordeliers, 15 rue de l' Ecole de Medecine, 75270 Paris Cedex 06 (France)

    2011-08-15

    The eye lens is a transparent tissue constituted of tightly packed fiber cells. To maintain homeostasis and transparency of the lens, the circulation of water, ions and metabolites is required. Junctional microdomains connect the lens cells and ensure both tight cell-to-cell adhesion and intercellular flow of fluids through a microcirculation system. Here, we overview membrane morphology and tissue functional requirements of the mammalian lens. Atomic force microscopy (AFM) has opened up the possibility of visualizing the junctional microdomains at unprecedented submolecular resolution, revealing the supramolecular assembly of lens-specific aquaporin-0 (AQP0) and connexins (Cx). We compare the membrane protein assembly in healthy lenses with senile and diabetes-II cataract cases and novel data of the lens membranes from a congenital cataract. In the healthy case, AQP0s form characteristic square arrays confined by connexons. In the cases of senile and diabetes-II cataract patients, connexons were degraded, leading to malformation of AQP0 arrays and breakdown of the microcirculation system. In the congenital cataract, connexons are present, indicating probable non-membranous grounds for lens opacification. Further, we discuss the energetic aspects of the membrane organization in junctional microdomains. The AFM hence becomes a biomedical nano-imaging tool for the analysis of single-membrane protein supramolecular association in healthy and pathological membranes.

  11. Eye lens membrane junctional microdomains: a comparison between healthy and pathological cases

    Science.gov (United States)

    Buzhynskyy, Nikolay; Sens, Pierre; Behar-Cohen, Francine; Scheuring, Simon

    2011-08-01

    The eye lens is a transparent tissue constituted of tightly packed fiber cells. To maintain homeostasis and transparency of the lens, the circulation of water, ions and metabolites is required. Junctional microdomains connect the lens cells and ensure both tight cell-to-cell adhesion and intercellular flow of fluids through a microcirculation system. Here, we overview membrane morphology and tissue functional requirements of the mammalian lens. Atomic force microscopy (AFM) has opened up the possibility of visualizing the junctional microdomains at unprecedented submolecular resolution, revealing the supramolecular assembly of lens-specific aquaporin-0 (AQP0) and connexins (Cx). We compare the membrane protein assembly in healthy lenses with senile and diabetes-II cataract cases and novel data of the lens membranes from a congenital cataract. In the healthy case, AQP0s form characteristic square arrays confined by connexons. In the cases of senile and diabetes-II cataract patients, connexons were degraded, leading to malformation of AQP0 arrays and breakdown of the microcirculation system. In the congenital cataract, connexons are present, indicating probable non-membranous grounds for lens opacification. Further, we discuss the energetic aspects of the membrane organization in junctional microdomains. The AFM hence becomes a biomedical nano-imaging tool for the analysis of single-membrane protein supramolecular association in healthy and pathological membranes.

  12. Retrospective analysis of surgical strategies for traumatic lens dislocation in 105 cases

    Directory of Open Access Journals (Sweden)

    Sheng-Xiang Guo

    2016-06-01

    Full Text Available AIM: To retrospectively analyze the surgical strategies and outcome of traumatic lens dislocation. METHODS: Retrospective study. Clinical data of 105 cases(105 eyesdiagnosed with traumatic lens dislocation from April to June 2014 in our hospital were recruited. According to position of dislocated lens and complicated situations, different surgical approaches were performed, including intracapsular lens extraction, phacoemulsification, vitrectomy through pars plana and lensectomy.Meanwhile, vitreo-retinal or anti-glaucoma surgeries were performed in complicated cases.Preoperative and postoperative LogMar(Logarithm of the Minimum Angle of Resolutionvisual acuity were compared by paired t-test. Perioperative complications including expulsive choroidal hemorrhages and recurrent retinal detachment were recorded and assessed. RESULTS: All 105 dislocated lenses were removed completely. Visual acuity of 91 eyes(86.7%were significantly improved postoperatively.The visual acuity of most patients was 0.1-0.3(42 eyes, 40.0%and 1 patient's visual acuity with lens subluxation reached more than 0.8 postoperatively. Expulsive choroidal hemorrhages occurred in 1 eye intraoperatively and 1 eye postoperatively. Recurrent retinal detachment was observed in 2 eyes postoperatively. CONCLUSION: According to position of the lens dislocation, personalized surgery strategy is critical for therapy of traumatic lens dislocation.Expulsive choroidal hemorrhage is one of most several complications and should be managed properly.

  13. Successful toric intraocular lens implantation in a patient with induced cataract and astigmatism after posterior chamber toric phakic intraocular lens implantation: a case report

    Directory of Open Access Journals (Sweden)

    Kamiya Kazutaka

    2012-04-01

    Full Text Available Abstract Introduction We report the case of a patient in whom simultaneous toric phakic intraocular lens removal and phacoemulsification with toric intraocular lens implantation were beneficial for reducing pre-existing astigmatism and acquiring good visual outcomes in eyes with implantable collamer lens-induced cataract and astigmatism. Case presentation A 53-year-old woman had undergone toric implantable collamer lens implantation three years earlier. After informed consent was obtained, we performed simultaneous toric implantable collamer lens removal and phacoemulsification with toric intraocular lens implantation. Preoperatively, the manifest refraction was 0, -0.5 × 15, with an uncorrected visual acuity of 0.7 and a best spectacle-corrected visual acuity of 0.8. Postoperatively, the manifest refraction was improved to 0, -0.5 × 180, with an uncorrected visual acuity of 1.2 and a best spectacle-corrected visual acuity of 1.5. No vision-threatening complications were observed. Conclusion Toric intraocular lens implantation may be a good surgical option for the correction of spherical and cylindrical errors in eyes with implantable collamer lens-induced cataract and astigmatism.

  14. Akreos Adapt AO Intraocular Lens Opacification: A Case Report

    Directory of Open Access Journals (Sweden)

    Matteo Forlini

    2013-09-01

    Full Text Available A 79-year-old hyperglycemic patient was referred to the ‘Santa Maria delle Croci' Hospital, Ravenna, Italy. He presented with visual impairment in the right eye. Four years ago, he had had an uneventful cataract surgery in the right eye. We observed an opacification of the intraocular lens (IOL causing significant visual disturbance. The IOL was exchanged. Unfortunately, pathologic analysis was not performed. Patient-related factors such as hyperglycemia and hypertension might have been responsible for the opacification. To our knowledge, there is only one previous report of opacification of the Akreos Adapt AO IOL.

  15. Multicenter case-control study of the role of lens materials and care products on the development of corneal infiltrates.

    Science.gov (United States)

    Chalmers, Robin L; Keay, Lisa; McNally, John; Kern, Jami

    2012-03-01

    To evaluate the association of symptomatic soft contact lens (SCL)-related corneal infiltrative events (CIEs) with SCL material, lens care products (LCPs), and other risk factors. Cases with symptomatic CIEs were identified in a retrospective, multicenter case-control study at five academic eye care centers. Each case was matched to three controls each who had received eye care near the time of the case's last full examination at that center but were not matched for demographic or other factors. Infiltrate status was established by an expert panel who were masked to sponsor, SCL, and LCP brand. Stratified analyses were conducted removing all daily disposable (DD) and all extended wear (EW) cases. Clinical records from 166 patients with symptomatic CIEs and known EW status were included. Cases used >50 SCL brands and >10 LCP brands. Increased risk in univariate analysis for LCP was not significant after adjustment for other factors. In the multivariate analysis of all cases, use of reusable SCLs (4.03×; 95% C.I. 1.12 to 14.67) and EW (3.98×; 2.32 to 6.84) increased risk and patient age (per year older) was protective (0.96×; 0.94 to 0.98). Among daily wear cases (n = 102 cases), use of reusable SCLs (12.46×; 1.54 to 100.62) and silicone hydrogel (SiHy) (1.99×; 1.06 to 3.75) and age (0.95×: 0.92 to 0.97) were associated. Without DD cases (n = 162), EW (4.42×; 2.53 to 7.70), SiHy use (1.84×; 1.03 to 3.29), and patient age (0.96× 0.94 to 0.98) were significant factors. No specific SCL or LCP brands were associated with increased risk. In this community-based trial, younger patients were at increased risk of infiltrative events. DD lenses were protective relative to reusable lenses. Overnight use increased risk in all analyses and silicone hydrogels increased risk in daily wearers, regardless of LCP brand. Improvements in lens storage case hygiene and environment may be a mechanism for reducing risk of CIEs related to SCL use.

  16. A case of Alagille syndrome complicated by intraocular lens subluxation and rhegmatogenous retinal detachment

    Directory of Open Access Journals (Sweden)

    Fukumoto M

    2013-07-01

    Full Text Available Masanori Fukumoto, Tsunehiko Ikeda, Tetsuya Sugiyama, Mari Ueki, Takaki Sato, Eisuke Ishizaki Department of Ophthalmology, Osaka Medical College, Takatsuki City, Japan Abstract: This case report describes a case of Alagille syndrome with developing intraocular lens subluxation and rhegmatogenous retinal detachment 4 years after cataract surgery. A 15-year-old female patient with Alagille syndrome-associated cataracts in both eyes underwent phacoemulsification aspiration and intraocular lens implantation. Four years postoperative, intraocular lens subluxation developed in her left eye. For treatment, extraction of the dislocated intraocular lens, anterior vitrectomy, and intraocular lens fixation was performed. Three weeks later, the patient developed rhegmatogenous retinal detachment, which was well-treated by pars plana vitrectomy. Cataract surgery needs to be performed carefully in patients with Alagille syndrome due to the weakness of the zonule of Zinn. Careful postoperative observation is necessary for patients with Alagille syndrome who have undergone intraocular surgery in order to facilitate early detection of a possible rhegmatogenous retinal detachment. Keywords: Alagille syndrome, cataract, retina, surgery

  17. [Risk factors for contact lens-related microbial keratitis: A multicenter case-control study].

    Science.gov (United States)

    Becmeur, P H; Abry, F; Bourcier, T; Meyer, N; Sauer, A

    2017-03-01

    Currently, the most feared complication by ophthalmologists of contact lens (CL) wear is microbial keratitis (MK), even though its incidence remains low. It is also a significant financial burden for society. This study aimed to identify the risk factors for CL-related MK especially with regard to hygiene and pattern of use, in a large, prospective, multicenter, case-control study. A multicenter retrospective case-control study was designed. The CL-related MK subpopulation (case) was compared with healthy CL wearers (control) using a 52-item anonymous questionnaire designed to determine subject demographics, lens wear history, lens type and disinfection solution, fitting, patient education, hygiene and maintenance of contact lenses, and patient history. Univariate logistic regression analysis was performed to compare both groups. The study included 497 cases and 364 controls. The risk factors associated with the greatest increased odds of CL-related MK were as follows: extended wear (OR=2.96 [1.65-5.33], Pcase replacement (OR=3.95 [2.28-6.82] Pcase maintenance. The knowledge of these risks factors incentivizes action at all levels to reduce the incidence of MK, from the prescriber to the patient, including the type of CL, case and contact lens solution. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  18. CATARACT SURGERY AND INTRAOCULAR LENS POWER CALCULATION IN A PATIENT WITH ANTERIOR MEGALOPHTHALMOS WITH NORMAL SIZED CRYSTALLINE LENS; CASE REPORT

    Directory of Open Access Journals (Sweden)

    Glišić Selimir

    2015-12-01

    Full Text Available Cataract surgery and intraocular lens power calculation is challenging in patients with anterior megalophthalmos and cataract, with postoperative refractive surprise frequently reported. Deep anterior chamber in these patients substantially influence effective lens position. To minimize possibility of refractive surprise, we used Haigis formula that takes into account anterior chamber depth in the lens power calculation for our patient. Cataract was managed by phakoemulsification with standard intraocular lens implanted in the capsular bag. Postoperatively, satisfying refractive result was achieved and refractive surprise was avoided.

  19. A Case of Non-Contact Lens related Acanthamoeba keratitis in Malaysia

    Directory of Open Access Journals (Sweden)

    Mohamed Kamel, A. G.

    2005-01-01

    Full Text Available Acanthamoeba is a ubiquitous free-living amoeba and is responsible for an uncommon yet increasingly diagnosed keratitis in humans. Acanthamoeba keratitis is perhaps the most challenging ocular infection to manage successfully and it can result in permanently impaired vision or blindness. Although contact lens use is the principal risk factor, about 10% of cases occur following trauma and exposure to contaminated soil or water. Cases of Acanthamoeba keratitis involving contact lens wearers have previously been reported in Malaysia but this is the first time, a non-contact lens relatedAcanthamoeba keratitis is reported. The case involved a 28 year old Indonesian male construction worker who had a trauma of the right eye. While working his eye was struck by some sand and dust particles and he quickly washed his eye with water from an open tank at the construction site. He then experienced pain, redness, glaring and blurring of vision of the right eye. The diagnosis was missed at the initial presentation but subsequent culture of the corneal scraping demonstrated Acanthamoeba as the aetiological agent. The history, clinical findings, diagnosis and treatment of non-contact lens related Acanthamoeba keratitis are briefly discussed in this communication. We hope to create awareness especially among the medical and paramedical staff about the existence of this infection in the country and fully support the consideration of Acanthamoeba keratitis as part of the differential diagnosis of most cases of presumed microbial keratitis.

  20. A case of iridoschisis associated with lens displacement into the vitreous cavity

    Directory of Open Access Journals (Sweden)

    Tetsuya Mutoh

    2010-05-01

    Full Text Available Tetsuya Mutoh1, Yukihiro Matsumoto1, Makoto Chikuda11Department of Ophthalmology, Dokkyo Medical University Koshigaya Hospital, Saitama, JapanAbstract: We report the case of a 67-year-old woman with a lens that was displaced into the vitreous cavity in one eye and ipsilateral iridoschisis. She was free from a history of ocular trauma or of heritable ocular disease. Her best-corrected visual acuity was 1.2 bilaterally and right eye showed signs of iridoschisis. The corneal endothelial cell density decreased to 1,263 cells/mm2 in the right eye preoperatively. We speculated that iris tissue flowing in the anterior chamber might have intermittently touched the corneal endothelium. 25-gauge pars plana vitrectomy and lens removal were performed immediately. Free-floating iris tissue was cut during surgery with care not to injure the corneal endothelial cells. The postoperative progress was satisfactory and scleral fixation of an intraocular lens is planned. Iridoschisis is an uncommon cause of lens displacement into the vitreous cavity.Keywords: lens displacement, vitreous cavity, iridoschisis, corneal endothelial cell density, free-floating iris tissue

  1. Clinical Observation of 126 Cases of Sutureless Phacoemulsification with PMMA Intraocular Lens Implantation

    Institute of Scientific and Technical Information of China (English)

    Yanshuang Yan; Zhengxing Mao

    2000-01-01

    Objective: To observe the safety and effect of sutureless phacoemulsification with PMMA intraocular lens (IOL) implantation.Methods: One-hundred and twenty-six cases (126 eyes) of sutureless phacoemulsification with PMMA intraocular lens (IOL) implantation were retrospected and evaluated. The surgeries were performed through a limbal tunnel incision. PMMA IOLs with 5.5mm or 6.0mm in diameter were implanted.Results: The follow-up was 3~20 months. Visual acuity of 0. 5 or better was obtained in 120 cases (95.2%), and that of 1.0 or better was obtained in 89 cases (70. 6% ).Intra-operative complications included posterior capsule rupture in 9 cases (7. 1% ) and iris injury in 7 cases(5.6% ). Postoperative complications included early corneal edema in 96 cases(76.2% ), transient intraocular pressure elevation in 5 cases(4. 3%),remnant of cortex in 1 case and leakage of incision in 1 case. M1 were properly managed with good results.Conclusion: Sutureless phacoemulsification with PMMA IOL implantation is safe even in grass-root hospitals where cataracts are harder.

  2. Diffractive super-resolution elements applied to near-field optical data storage with solid immersion lens

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yaoju [Department of Physics, Wenzhou Normal College, Wenzhou 325027 (China); Xiao Huaceng [Department of Biology, Wenzhou Normal College, Wenzhou 325027 (China); Zheng Chongwei [Department of Physics, Wenzhou Normal College, Wenzhou 325027 (China)

    2004-07-01

    The intensity distribution in near-field optical data storage with a solid immersion lens (SIL) and a binary phase-only diffractive super-resolution element (DSE) is expressed in a single definite integral by using angular spectrum theory. The super-resolution of binary two-zone phase DSEs for SIL systems is numerically studied for low and high numerical aperture (NA) systems. The results for the low-NA systems show that optimizing the zone boundary and phase of binary two-zone phase DSEs can decrease the spot size. The Strehl ratio, sidelobe intensity and axial characteristic length are also discussed. In addition, a binary two-zone phase filter can change the position of focus that shifts from the SIL-air interface to air, but the spot size increases. For the high-NA systems, the y- and z-polarized components of the transmitted field increase as the boundary and depth of phase of the DSE increase. When the phase boundary is smaller and the depth of phase depth is close to {pi}, super-resolving effect of DSE is more obvious but the intensity of sidelobes is larger for the high-NA system. In this way, it may be possible to improve both the resolution and focal depth of the SIL with high-NA systems.

  3. Examining the role of carbon capture and storage through an ethical lens.

    Science.gov (United States)

    Medvecky, Fabien; Lacey, Justine; Ashworth, Peta

    2014-12-01

    The risk posed by anthropogenic climate change is generally accepted, and the challenge we face to reduce greenhouse gas (GHG) emissions to a tolerable limit cannot be underestimated. Reducing GHG emissions can be achieved either by producing less GHG to begin with or by emitting less GHG into the atmosphere. One carbon mitigation technology with large potential for capturing carbon dioxide at the point source of emissions is carbon capture and storage (CCS). However, the merits of CCS have been questioned, both on practical and ethical grounds. While the practical concerns have already received substantial attention, the ethical concerns still demand further consideration. This article aims to respond to this deficit by reviewing the critical ethical challenges raised by CCS as a possible tool in a climate mitigation strategy and argues that the urgency stemming from climate change underpins many of the concerns raised by CCS.

  4. Electrostatic protocol treatment lens. The purpose of this device is to transport Antiprotons from the new ELENA storage beam to all AD experiments. The electrostatic device was successfully tested in ASACUSA two weeks ago.

    CERN Multimedia

    Maximilien Brice

    2012-01-01

    Electrostatic protocol treatment lens. The purpose of this device is to transport Antiprotons from the new ELENA storage beam to all AD experiments. The electrostatic device was successfully tested in ASACUSA two weeks ago.

  5. ELECTRON MICROSCOPY STUDIES OF LENS FROM TWO CASES OF OCULAR SIDEROSIS

    Institute of Scientific and Technical Information of China (English)

    1991-01-01

    Cases report Case 1: A 50-year-old man was injuried by iron filings on his left eye. He was admitted to our hospital on Feb. 3, 1987. On examination, his visual acuity was 20/15 OD and 20/500 OS. Left eye: The cornea was clear, the anterior chamber depth was 3 CT, tyndall(-). Iris pattern is clear, pupil was 3.5×3.5mm. Dilated pupil examination: There were scattered brown-yellow ironrust under anterior capsule and the lens cortex had become totally opaque. Nuclear, posterior capsule and fundus can't be ...

  6. Energy storage systems: power grid and energy market use cases

    Directory of Open Access Journals (Sweden)

    Komarnicki Przemysław

    2016-09-01

    Full Text Available Current power grid and market development, characterized by large growth of distributed energy sources in recent years, especially in Europa, are according energy storage systems an increasingly larger field of implementation. Existing storage technologies, e.g. pumped-storage power plants, have to be upgraded and extended by new but not yet commercially viable technologies (e.g. batteries or adiabatic compressed air energy storage that meet expected demands. Optimal sizing of storage systems and technically and economically optimal operating strategies are the major challenges to the integration of such systems in the future smart grid. This paper surveys firstly the literature on the latest niche applications. Then, potential new use case and operating scenarios for energy storage systems in smart grids, which have been field tested, are presented and discussed and subsequently assessed technically and economically.

  7. [Lens platform].

    Science.gov (United States)

    Łukaszewska-Smyk, Agnieszka; Kałuzny, Józef

    2010-01-01

    The lens platform defines lens structure and lens material. Evolution of lens comprises change in their shape, angulation of haptens and transition of three-piece lens into one-piece lens. The lens fall into two categories: rigid (PMMA) and soft (siliconic, acrylic, colameric). The main lens maaterials are polymers (hydrophilic and hydrophobic). The lens platform has an effect on biocompatibility, bioadhesion, stability of lens in capsule, degree of PCO evolution and sensitiveness to laser damages.

  8. CASE STORAGE BASED ON RELATIONAL DATABASE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This paper focused on the integration of case base and relational database management system (RDBMS). The organizational and commercial impact will be far greater if the case-based reasoning (CBR) system is integrated with main stream information system, which is exemplified by RDBMS. The scalability, security and robustness provided by a commercial RDBMS facilitate the CBR system to manage the case base.The virtual table in relational database (RDB) is important for CBR systems to implement the flexibility of case template. It was discussed how to implement a flexible and succinct case template, and a mapping model between case template and RDB was proposed. The key idea is to build the case as the virtual view of underlying data.

  9. The method for staining of anterior lens capsule in cases with small and rigid pupils

    Directory of Open Access Journals (Sweden)

    V. Kumar

    2014-07-01

    Full Text Available Purpose: to evaluate the safety and effectiveness of proposed method for staining with trypan blue anterior lens capsule in cases with small and rigid pupils.Methods: the safety and effectiveness of the proposed method was evaluated in 169 cases having small and rigid pupils of III and IV grade. Surgical steps included: irrigation of anterior chamber with small amount of air, enough to block the pupil; irrigation of posterior chamber with little amount of dye followed by aspiration of air bubble. the excess dye came out and stained the capsule in pupillary area.Results: No difficulty was encountered in irrigating the posterior chamber with dye. Uneven staining of the capsule was noticed in 16 cases (9.5%. In 3 cases (1.8% extensive staining of iris and posterior capsule was observed. Continuous curvilinear capsulorhexis was performed successfully in 97.6% cases. In 4 cases there was radial run of the rhexis extending up to posterior capsule. Postopera- tive inflammation of 1st and 2nd degree was observed in 5.9 and 23.1% cases, which was related to unavoidable trauma to iris tissue during pupil stretching.Conclusion: the proposed method of capsule staining in cases with small and rigid pupils is safe and effective.

  10. The method for staining of anterior lens capsule in cases with small and rigid pupils

    Directory of Open Access Journals (Sweden)

    V. Kumar

    2012-01-01

    Full Text Available Purpose: to evaluate the safety and effectiveness of proposed method for staining with trypan blue anterior lens capsule in cases with small and rigid pupils.Methods: the safety and effectiveness of the proposed method was evaluated in 169 cases having small and rigid pupils of III and IV grade. Surgical steps included: irrigation of anterior chamber with small amount of air, enough to block the pupil; irrigation of posterior chamber with little amount of dye followed by aspiration of air bubble. the excess dye came out and stained the capsule in pupillary area.Results: No difficulty was encountered in irrigating the posterior chamber with dye. Uneven staining of the capsule was noticed in 16 cases (9.5%. In 3 cases (1.8% extensive staining of iris and posterior capsule was observed. Continuous curvilinear capsulorhexis was performed successfully in 97.6% cases. In 4 cases there was radial run of the rhexis extending up to posterior capsule. Postopera- tive inflammation of 1st and 2nd degree was observed in 5.9 and 23.1% cases, which was related to unavoidable trauma to iris tissue during pupil stretching.Conclusion: the proposed method of capsule staining in cases with small and rigid pupils is safe and effective.

  11. A prospective study of 413 cases of lens-induced glaucoma in Nepal

    Directory of Open Access Journals (Sweden)

    Pradhan Damodar

    2001-01-01

    Full Text Available Purpose: To determine the frequency and types of lens-induced glaucoma (LIG, reasons for late presentation and outcome of current management. Methods: Prospective case series of 413 patients/eyes with LIG over a 12-month period in 1998; 311 of these patients underwent cataract surgery. Visual acuity and intraocular pressure (IOP were pre-and postoperatively assessed. Results: Four hundred and thirteen (1.5% of 27,073 senile cataracts seen in the outpatient department of Sagarmatha Choudhary Eye Hospital, Lahan, Nepal presented with LIG. There were 298 (72% phacomorphic cases and 115 (28% phacolytic glaucoma. Pain for more than 10 days was reported by 293 (71% patients. The majority, 258 (62.4%, travelled a distance of more than 100 kms to the hospital. The major reasons for late presentation were "no escort" in 143 (34.6% and "lack of money" in 128 (31.0% cases. At presentation the IOP was more than 30 mm Hg in 327 (79% eyes. Following cataract surgery, 251 (80.7% had 21 mm Hg or less at discharge. The visual acuity was hand-movement or less before surgery in all eyes; at discharge 120 of 311 operated eyes (38.6% achieved 6/60 or better, 97 (31.2% less than 6/60, and 94 (30.2% less than 3/60. The main causes for poor outcome in 94 cases were optic atrophy in 32 (34% eyes, uveitis in 25 (26.6%eyes and corneal oedema in 24 (25.5% eyes. Conclusion: The results highlight the importance of early diagnosis and treatment of visually disabling cataract. There is a need to educate both the patient and the cataract surgeon of the dangers of lens-induced glaucoma and of the poor outcome if treatment is delayed.

  12. Unusual case of methicillin resistant staphylococcus aureus and acanthamoeba keratitis in a non-contact lens wearer from Kashmir, India.

    Science.gov (United States)

    Lone, Rubina; Syed, Khurshid; Abdul, Rashid; Sheikh, Sajjad Ahmed; Shah, Faisal

    2009-01-01

    Acanthamoeba species can cause a chronic, progressive, ulcerative keratitis of the eye, which is not responsive to the usual antimicrobial treatment and is frequently mistaken for stromal herpes keratitis. Acanthamoeba keratitis continues to be a burgeoning and unsolved problem. Although soft contact lens wear is reported as the major risk factor in other parts of the world, reports from India suggest that acanthamoeba keratitis is more common among non-contact lens wearers. An unusual case of coinfection with Acanthamoeba and methicillin resistant staphylococcus aureus (MRSA) as causes of corneal keratitis in a contact lens wearer from Kashmir, India, is reported. Recent findings have shown that MRSA uses amoebae to spread, sidestepping hospital and other protection measures. Cysts of the isolated Acanthamoeba tolerated an incubation temperature of 40°C, indicating a pathogenic species. This case highlights the importance of culture methods in the diagnosis of corneal infection and the choice of treatment regimen.

  13. Contact lens-related infectious keratitis in Malaysia.

    Science.gov (United States)

    Reddy, S C; Tajunisah, I

    2008-01-01

    Fifty-six contact lens-related corneal ulcers (central in 32; hypopyon in 24 and stromal abscess in 6) were studied. Culture was positive in 78.9%. Corneal ulcers healed with intense antibiotic therapy in nearly all patients. Increased awareness of lens care/disinfection and frequent replacement of storage cases and solution, and early detection of pathogens and intensive appropriate antibiotic therapy are key points in management.

  14. Nonadhesive, silica nanoparticles-based brush-coated contact lens casesCompromising between ease of cleaning and microbial transmission to contact lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Hooymans, Johanna M. M.; Qiu, Jun; de-Bont, Nik; Gelling, Onko-Jan; van der Mei, Henny C.; Busscher, Henk J.

    2013-01-01

    Surface properties of lens cases are determinant for their cleanability and for microbial transmission from lens cases to contact lenses (CLs). PEG-polymer-brush-coatings are known to decrease microbial adhesion more than other surface-coatings. Here, we applied a robust, silica nanoparticles-based

  15. Spontaneous fracture of an implanted posterior chamber polyimide intraocular lens haptic: A case report

    Directory of Open Access Journals (Sweden)

    Haemin Kang

    2014-01-01

    Full Text Available A 57-year-old male patient visited our clinic for decreased visual acuity in the right eye for 10 days. He denied any trauma history, but recalled that the symptom developed after straining. He had undergone uncomplicated phacoemulsification and posterior chamber intraocular lens (IOL implantation in the bag of the right eye 11 years ago. The IOL was a three-piece silicone polyimide-haptics design. On slit-lamp examination, the IOL optic and proximal part of nasal fractured haptic were found in the anterior chamber. The distal part of fractured haptic was observed in the capsular bag. He underwent IOL exchange. The fracture site of the haptic was near the optic-haptic junction. This is the unique case report of a spontaneous fracture of an implanted posterior chamber polyimide IOL haptic, which implies the possibility of IOL haptic fracture in various haptic materials.

  16. Inadvertent implantation of a reversed-optic Tecnis ZM900 multifocal intraocular lens: case report

    Directory of Open Access Journals (Sweden)

    Wilson Takashi Hida

    2012-12-01

    Full Text Available A 51-year-old woman with age-related cataract had an uneventful phacoemulsification and a Tecnis ZM900 multifocal intraocular lens (IOL implantation in both eyes. During IOL implantation in the left eye, the optic was unintentionally reversed in the bag and left that way. The refraction surprise was not significant and six months postoperatively the corrected distance visual acuity in both eyes was 20/20 and neither complained of visual discomfort. In conclusion, we found that a reversed-optic Tecnis multifocal IOL in the present case resulted in good final visual acuity without significant differences in aberrations compared to the other eye, and a conservative management can be taken as a safe option.

  17. [Femtosecond laser-assisted lens surgery depending on interface design and laser pulse energy: results of the first 200 cases].

    Science.gov (United States)

    Mayer, W J; Klaproth, O K; Ostovic, M; Hengerer, F H; Kohnen, T

    2014-12-01

    This study was designed to evaluate the effectiveness and safety of femtosecond laser-assisted lens surgery depending on interface design and laser pulse energy settings. In this non-randomized, consecutive case series200 eyes underwent femtosecond laser-assisted (LenSx, Alcon) lens surgery between November 2012 and June 2013. Group 1 consisted of 85 eyes with 60 cataracts and 25 refractive lens exchanges (RLE) which were treated with a curved direct contact interface, and group 2 consisting of 115 eyes with 72 cataracts and 43 RLEs treated with a modified interface using an additional soft contact lens (SoftFit™, Alcon) between the corneal surface and the interface. The degree of opacity of the lens in cataract eyes was measured with a Scheimpflug camera. Afterwards, phacoemulsification was performed with intraocular lens (IOL) implantation in all eyes. Primary endpoints were the effective phacoemulsification time (EPT), the average laser treatment time and the occurrence of intraoperative complications. The mean EPT in group 1 was 1.62 ± 1.12 s (cataract 1.94 ± 1.31 s, RLE 1.29 ± 1.01 s) and in group 2 the mean EPT was 1.66 ± 0.92 s (cataract 1.98 ± 1.28 s, RLE 1.33 ± 1.22 s, p = 0.32 between groups). The laser treatment lasted on average 48.90 ± 2.45 s (group 1) and 49.70 ± 2.87 s (group 2) with an average lens fragmentation thickness of 3401.48 ± 401.12 µm (all groups). In four cases of group 1, a second applanation of the interface was necessary. Furthermore, one anterior capsule tear, 39 cases of intraoperative wrinkling of the corneal surface and 21 cases in which the corneal incision had to be opened manually were documented in group 1. In group 2 no second applanation of the interface, no anterior capsule tears and no corneal wrinkling but 9 cases with a manual opening of corneal incisions were documented (p interface and reduced laser pulse energy.

  18. Results of case-control studies support the association between contact lens use and Acanthamoeba keratitis

    Directory of Open Access Journals (Sweden)

    Pacella E

    2013-05-01

    Full Text Available Elena Pacella,1 Giuseppe La Torre,2 Maria De Giusti,2 Chiara Brillante,1 Anna Maria Lombardi,2 Gianpaolo Smaldone,1 Tommaso Lenzi,1 Fernanda Pacella11Department of Sense Organs, Faculty of Medicine and Dentistry, Sapienza University of Rome, Italy; 2Department of Public Health and Infectious Diseases, Faculty of Pharmacy and Medicine, Sapienza University of Rome, ItalyBackground: Acanthamoeba keratitis (AK is ever more frequently reported in industrialized countries. The loss of the corneal surface integrity consequent to secondary microtrauma produced by the use of contact lens (CL favors the penetration of the parasite into the corneal tissue.Objectives: A scientific review was performed to investigate the association of CL wear as an Acanthamoeba keratitis (AK risk factor.Methods: A computerized screening of 7834 Medline articles (4623 from PubMed; 3211 from Scopus used a strict selection criteria of case-control studies involving CL wear and/or trauma.Results: The search yielded five case-control studies published from 1995 to 2012. All studies included showed a statistically significant positive association between AK and CL use, with a combined odds ratio (OR of 10.21 (95%, confidence intervals [CI]; 3.57–27.64.Statistical analysis: All studies included showed a statistically significant positive association between AK and CL use, though with differing OR values.Conclusion: Though rare, AK should be held in higher consideration when ophthalmologists are faced with CL users exhibiting simplex-like lesions associated with circular stromal infiltrates and disproportionate ocular pain in respect to the objective clinical picture.Keywords: keratitis, contact lens, Acanthamoeba

  19. Long-term corneal endothelial cell changes in pediatric intraocular lens reposition and exchange cases.

    Science.gov (United States)

    Wang, Yan; Wu, Mingxing; Zhu, Liyuan; Liu, Yizhi

    2012-04-01

    To evaluate long-term corneal endothelial cell changes of intraocular lens (IOL) reposition and exchange in children. State key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangzhou, 510060, China In this retrospective study, all IOL reposition and exchange procedures performed in patients under 14 years old between January 1999 and April 2009 were included. Follow-up outcomes included corneal endothelial cell density, hexagonality, coefficient of variance, average cell size. IOL reposition procedures in 12 eyes (12 cases) (reposition group, RPG), and IOL exchanges in eight eyes (eight cases) (exchange group, EXG) were performed because of IOL pupillary capture or IOL dislocation. Median of follow-up was 44.5 months in RPG and 66.2 months in EXG. The density of corneal endothelial cells in RPG (2,053 ± 493/mm(2)) and EXG (2,100 ± 758/mm(2)) was significantly decreased in comparison to the control eyes (3,116 ± 335/mm(2)). Hexagonality of corneal endothelial cells and coefficient of variance showed no difference among the control group, RPG and EXG (P > 0.05). The density of corneal endothelial cells was conspicuously decreased after IOL reposition or exchange procedures in childhood cases. Longer follow-up must be conducted in these cases.

  20. Viabilidade do pólen de laranjas doces em diferentes condições de armazenamento Viability of citrus pollen in different storage conditions

    Directory of Open Access Journals (Sweden)

    Leila Aparecida Salles Pio

    2007-02-01

    Full Text Available O presente trabalho foi realizado visando avaliar a viabilidade de grãos de pólen armazenados das cultivares copas cítricas Natal, Pêra e Valência. O pólen foi submetido a 3 temperaturas de armazenamento: -10ºC (freezer, 4ºC ( refrigerador e temperatura ambiente; 2 ambientes (com e sem dessecador e na presença e ausência de sílica-gel. A avaliação do índice de germinação foi feita com o pólen fresco e a cada 7 dias, durante 9 semanas. Para avaliar a germinação foi utilizado meio constituído de 1% de ágar e 10% de sacarose, 800 mg L-1 de nitrato de cálcio (Ca(NO32 4H2O, 200 mg L-1 de Ácido Bórico (H3BO3 e pH corrigido para 6,5. Os grãos de pólen foram incubados à temperatura de 25 ± 2ºC por 12 horas. As avaliações foram realizadas através da porcentagem de grãos de pólen germinados. Constatou-se que os grãos de pólen possuem redução na viabilidade com o aumento do tempo de armazenamento; o armazenamento em freezer (-10ºC foi mais eficiente do que em refrigerador (4ºC e à temperatura ambiente. Melhores resultados foram alcançados com os tratamentos em freezer com sílica-gel dentro de dessecador e em freezer sem sílica-gel dentro de dessecador. A cultivar Valência apresentou-se superior às demais em todos os tratamentos.The present work was accomplished to evaluate the effects of storage on the viability of pollen grains from Natal, Pêra and Valência cultivars of sweet oranges. The grains were stored at 3 temperatures: -10ºC (freezer, 4ºC (refrigerator, and room temperature; 2 environments (with or without desiccator and in the presence or absence of silica-gel. The germination was evaluated every 7 days, during 9 weeks. To evaluate the germination, a medium consisting of 1% and sucrose 10%, 800 mg L-1 calcium nitrate (Ca(NO32 4H2O, 200 mg L-1 boric acid (H3BO3 and pH 6,5 was used. The pollen was incubated at 25 ± 2ºC temperature for 12 hours. The evaluation was performed using the percentage of

  1. Perfluorodecaline residue in the anterior chamber of a patient with an intact crystalline lens: a case report

    Directory of Open Access Journals (Sweden)

    Aydin Erdinc

    2008-01-01

    Full Text Available Abstract Background Perfluorocarbon liquids are frequently used as intraoperative tools in vitreoretinal surgery and may occasionally be retained in the vitreous cavity. We report a patient who underwent pars plana vitrectomy for a giant tear after receiving blunt trauma to his right eye and sustained postoperative perfluorocarbon liquid residue in the anterior chamber in spite of an intact crystalline lens. Case presentation Perfluorodecaline was used as a temporary retinal tamponade. Three weeks after the surgery, a residue of heavy liquid was observed in the anterior chamber, even though the patient had an intact crystalline lens without any tilt or dislocation. The remnant of the heavy liquid was taken out of the anterior chamber immediately to avoid secondary complications. Conclusion Presence of heavy liquids in the anterior chamber may be associated with zonular defects even though the patient has an intact crystalline lens.

  2. Bilateral transient pupil closure after iris supported intraocular lens implantation in a case with Marfan syndrome

    Directory of Open Access Journals (Sweden)

    Necip Kara

    2012-01-01

    Full Text Available A 16-year-old woman presented with Marfan syndrome and bilateral ectopia lentis. The surgical treatment including removal of the crystalline lens and implantation of an iris-supported intraocular lens in both eyes at a week interval. Postoperatively, the biomicroscopic examination showed total pupil closure bilaterally. After the topical tropicamide treatment, the pupil returned to normal shape.

  3. Corrosion studies on casing steel in CO2 storage environments

    NARCIS (Netherlands)

    Zhang, X.; Zevenbergen, J.F.; Benedictus, T.

    2013-01-01

    The corrosion behavior of casing steel N80 in brine plus CO2 was studied in autoclave to simulate the CO2 storage environment. The brine solution used in the study contained 130 g/l NaCl, 22.2 g/l CaCl2 and 4 g/l MgCl2. The CO2 was charged in the autoclave at different pressures (60, 80 and 100 bar)

  4. Corrosion studies on casing steel in CO2 storage environments

    NARCIS (Netherlands)

    Zhang, X.; Zevenbergen, J.F.; Benedictus, T.

    2013-01-01

    The corrosion behavior of casing steel N80 in brine plus CO2 was studied in autoclave to simulate the CO2 storage environment. The brine solution used in the study contained 130 g/l NaCl, 22.2 g/l CaCl2 and 4 g/l MgCl2. The CO2 was charged in the autoclave at different pressures (60, 80 and 100 bar)

  5. Economic Analysis Case Studies of Battery Energy Storage with SAM

    Energy Technology Data Exchange (ETDEWEB)

    DiOrio, Nicholas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Dobos, Aron [National Renewable Energy Lab. (NREL), Golden, CO (United States); Janzou, Steven [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-11-01

    Interest in energy storage has continued to increase as states like California have introduced mandates and subsidies to spur adoption. This energy storage includes customer sited behind-the-meter storage coupled with photovoltaics (PV). This paper presents case study results from California and Tennessee, which were performed to assess the economic benefit of customer-installed systems. Different dispatch strategies, including manual scheduling and automated peak-shaving were explored to determine ideal ways to use the storage system to increase the system value and mitigate demand charges. Incentives, complex electric tariffs, and site specific load and PV data were used to perform detailed analysis. The analysis was performed using the free, publically available System Advisor Model (SAM) tool. We find that installation of photovoltaics with a lithium-ion battery system priced at $300/kWh in Los Angeles under a high demand charge utility rate structure and dispatched using perfect day-ahead forecasting yields a positive net-present value, while all other scenarios cost the customer more than the savings accrued. Different dispatch strategies, including manual scheduling and automated peak-shaving were explored to determine ideal ways to use the storage system to increase the system value and mitigate demand charges. Incentives, complex electric tariffs, and site specific load and PV data were used to perform detailed analysis. The analysis was performed using the free, publically available System Advisor Model (SAM) tool. We find that installation of photovoltaics with a lithium-ion battery system priced at $300/kWh in Los Angeles under a high demand charge utility rate structure and dispatched using perfect day-ahead forecasting yields a positive net-present value, while all other scenarios cost the customer more than the savings accrued.

  6. Consumer electronic optics: how small can a lens be: the case of panomorph lenses

    Science.gov (United States)

    Thibault, Simon; Parent, Jocelyn; Zhang, Hu; Du, Xiaojun; Roulet, Patrice

    2014-09-01

    In 2014, miniature camera modules are applied to a variety of applications such as webcam, mobile phone, automotive, endoscope, tablets, portable computers and many other products. Mobile phone cameras are probably one of the most challenging parts due to the need for smaller and smaller total track length (TTL) and optimized embedded image processing algorithms. As the technology is developing, higher resolution and higher image quality, new capabilities are required to fulfil the market needs. Consequently, the lens system becomes more complex and requires more optical elements and/or new optical elements. What is the limit? How small an injection molded lens can be? We will discuss those questions by comparing two wide angle lenses for consumer electronic market. The first lens is a 6.56 mm (TTL) panoramic (180° FOV) lens built in 2012. The second is a more recent (2014) panoramic lens (180° FOV) with a TTL of 3.80 mm for mobile phone camera. Both optics are panomorph lenses used with megapixel sensors. Between 2012 and 2014, the development in design and plastic injection molding allowed a reduction of the TTL by more than 40%. This TTL reduction has been achieved by pushing the lens design to the extreme (edge/central air and material thicknesses as well as lens shape). This was also possible due to a better control of the injection molding process and material (low birefringence, haze and thermal stability). These aspects will be presented and discussed. During the next few years, we don't know if new material will come or new process but we will still need innovative people and industries to push again the limits.

  7. Approaching Knowledge Management through the Lens of the Knowledge Life Cycle: A Case Study Investigation

    Science.gov (United States)

    Fowlin, Julaine M.; Cennamo, Katherine S.

    2017-01-01

    More organizational leaders are recognizing that their greatest competitive advantage is the knowledge base of their employees and for organizations to thrive knowledge management (KM) systems need to be in place that encourage the natural interplay and flow of tacit and explicit knowledge. Approaching KM through the lens of the knowledge life…

  8. Case of late-onset corneal decompensation after iris-fixated phakic intraocular lens implantation.

    NARCIS (Netherlands)

    Eijden, R. van; Vries, N.E. de; Cruysberg, L.P.J.; Webers, C.A.; Berenschot, T.; Nuijts, R.M.

    2009-01-01

    A 48-year-old myopic patient with bilateral anterior chamber depth of 3.1 mm and endothelial cell density (ECD) of 2525 cells/mm(2) and 2638 cells/mm(2) preoperatively had bilateral implantation of an Artisan iris-fixated phakic intraocular lens (pIOL). Five years postoperatively, unilateral corneal

  9. Approaching Knowledge Management through the Lens of the Knowledge Life Cycle: A Case Study Investigation

    Science.gov (United States)

    Fowlin, Julaine M.; Cennamo, Katherine S.

    2017-01-01

    More organizational leaders are recognizing that their greatest competitive advantage is the knowledge base of their employees and for organizations to thrive knowledge management (KM) systems need to be in place that encourage the natural interplay and flow of tacit and explicit knowledge. Approaching KM through the lens of the knowledge life…

  10. Nonadhesive, silica nanoparticles-based brush-coated contact lens cases--compromising between ease of cleaning and microbial transmission to contact lenses.

    Science.gov (United States)

    Qu, Wenwen; Hooymans, Johanna M M; Qiu, Jun; de-Bont, Nik; Gelling, Onko-Jan; van der Mei, Henny C; Busscher, Henk J

    2013-05-01

    Surface properties of lens cases are determinant for their cleanability and for microbial transmission from lens cases to contact lenses (CLs). PEG-polymer-brush-coatings are known to decrease microbial adhesion more than other surface-coatings. Here, we applied a robust, silica nanoparticles-based brush-coating to polypropylene cases to evaluate their ease of cleaning and probability of bacterial transmission to CLs. Adhesion forces of nine bacterial strains (Pseudomonas, Staphylococci, and Serratia) to rigid CLs, polypropylene, and silica nanoparticles-based brush-coated polypropylene were measured using atomic-force-microscopy and subjected to Weibull analyses to yield bacterial transmission probabilities. Biofilms of each strain were grown in coated and uncoated cases and rinsed with a NaCl or antimicrobial lens care solution. Residual, viable organisms were quantified. Bacterial adhesion forces of all strains were significantly, up to tenfold smaller on brush-coated than on uncoated polypropylene. This yielded, higher transmission probabilities to a CL, but mild-rinsing yielded 10-100 fold higher removal of bacteria from brush-coated than from polypropylene cases. Moreover, due to weak adhesion forces, bacteria on brush-coated cases were two-to-three fold more susceptible to an antimicrobial lens care solution than on polypropylene cases. Therewith, the design of lens case surfaces is a compromise between ease of cleaning and transmission probability to CLs.

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her with a corneal abrasion. ... Studies Look at Effects of Marijuana on Vision FEB ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her ...

  13. Calcification of a hydrophilic acrylic intraocular lens: case report with laboratory analysis.

    Science.gov (United States)

    Bodnar, Z M; Rozot, P; Leishman, L; Ollerton, A; Michelson, J; Plasse-Fauque, S; Werner, L

    2013-09-01

    We analyzed a single-piece plate-type hydrophilic acrylic posterior chamber intraocular lens (IOL) that was explanted due to a progressive loss of vision, which occurred 6 years after uncomplicated phacoemulsification. Gross and light microscopy, as well as anterior segment optical coherence tomography (OCT) revealed granular deposits below the IOL surface. Light scattering, as measured with Scheimpflug photography and densitometry analyses was found to be increased; spectrophotometry demonstrated a decrease in the light transmittance of the explanted lens. The granular deposits within the IOL material were found to be composed of calcium by histochemical methods (alizarin red and Von Kossa stains). To our knowledge this is the only report of calcification of this IOL design. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  14. Can Maxwell's Fish Eye Lens Really Give Perfect Imaging? Part II. The case with drains

    CERN Document Server

    Sun, Fei; He, Sailing

    2010-01-01

    We use both FEM (finite element method) and FDTD (finite difference time domain method) to simulate the field distribution in Maxwell's fish eye lens with one or more passive drains around the image point. We use the same Maxwell's fish eye lens structure as the one used in recent microwave experiment [arXiv:1007.2530]: Maxwell's fish eye lens bounded by PEC (perfect electric conductor) is inserted between two parallel PEC plates (as a waveguide structure). Our simulation results indicate that if one uses an active coaxial cable as the object and set an array of passive drains around the image region, what one obtains is not an image of the object but only multiple spots resembling the array of passive drains. The resolution of Maxwell's fish eye is finite even with such passive drains at the image locations. We also found that the subwavelength spot around the passive drain is due to the local field enhancement of the metal tip of the drain rather than the fish eye medium or the ability of the drain in extra...

  15. A Case of Atypical Mucin Balls Wearing Extended Wear of Silicone Hydrogel Lens for Therapeutic Use

    Directory of Open Access Journals (Sweden)

    Yusuke Matsuzaki

    2013-01-01

    Full Text Available A 25-year-old man visited our hospital showing atopic conjunctivitis and corneal shield ulcer on his left eye. Although eye drops of 0.1% of betamethasone sodium phosphate and 0.1% of hyaluronic acid ophthalmic solution were prescribed, calcific corneal opacities developed. The corrected visual acuity decreased to 6/20 in Snellen chart. After corneal epithelial exfoliation, removal of calcific corneal opacity was scrubbed with MQA soaked in 0.05 M of ethylenediaminetetraacetic acid (EDTA. After washing the eye with 200 mL of physiological saline, a silicon hydrogel lens, PureVision (balafilcon A, was inserted to obtain pain relief for the therapeutic use. At postoperative day 11, mucin balls were found between cornea and contact lens and stained by rose bengal dye. One of them was atypically larger than usual, and the major axis was approximately 1.5 mm. Wearing lens was stopped, and all of mucin balls and corneal staining were disappeared at postoperative day. Little corneal opacity remained, and visual acuity after surgery recovered to 14/20 at five months.

  16. How Cumbersome is a Tenth Order Polynomial? The Case of Gravitational Triple Lens Equation

    CERN Document Server

    Rhie, S H

    2002-01-01

    Three point mass gravitational lens equation is a two-dimensional vector equation that can be embedded in a tenth order analytic polynomial equation of one complex variable, and we can solve the one variable equation on the source trajectories using recipies for Fortran or $C$ (portable for $C$++ or $C_{jj}$) in Numerical Recipes, or using packages such as Mathemetica, Matlab, etc. This ready solvability renders fitting microlensing light curves including triple lenses a normal process, and such was done in a circumbinary planet fit for MACHO-97-BLG-41. Subsequently, there was a claim that converting the triple lens equation into the analytic equation was rather cumbersome, and the impressionable judgement has caused an effect of mysterious impedance around the perfectly tractable lens equation. There are judgements. Then, there is nature. We looked up for one of the quantities of highest precision measurements: electron $g$-factor correction $a_e \\equiv g/2-1$. The current best experimental values of $a_e$ a...

  17. Bacterial and fungal biofilm formation on contact lenses and their susceptibility to lens care solutions

    Directory of Open Access Journals (Sweden)

    Siddharth Kackar

    2017-01-01

    Full Text Available Background: Microbial biofilm formation on contact lenses and lens storage cases may be a risk factor for contact lens-associated corneal infections. Various types of contact lens care solutions are used to reduce microbial growths on lenses. Objectives: The present study aimed at comparing the growths of biofilms on the different contact lenses and lens cases. The study also aimed at determining the effect of lens care solutions and bacteriophage on these biofilms. Materials and Methods: One type of hard lens and two types of soft lenses were used for the study. The organisms used were Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, Candida albicans ATCC 60193 and Escherichia coli ATCC 25922. Biofilm production was performed by modified O'Toole and Kolter method and effect of lens cleaning solutions and a crude coliphage on biofilms was also studied. Results were visualised using scanning electron microscopy and quantitated by colony counting method and spectrophotometric measurement of optical density (OD. Statistical analysis was done by SPSS 11.5, Kruskal–Wallis test and Chi-square test. Results: Soft lens cleaning solutions had a significant inhibitory effect (P = 0.020 on biofilm formation on soft lenses and also lens cases (P < 0.001. Soft lens cleaning solution 2 was more efficient than solution 1. However, no such inhibitory effect was observed with regard to hard lens cleaning solution, but for a significant reduction in the OD values (P < 0.001. There was no significant inhibitory effect by bacteriophages. Conclusion: This study showed the importance of selecting the appropriate lens cleaning solution to prevent biofilm production on contact lenses.

  18. Health information management using optical storage technology: case studies.

    Science.gov (United States)

    Kohn, D

    1992-05-01

    All the health care facilities examined in the case studies addressed several important organizational issues before and during the installation of their systems. All the facilities examined employee commitment. The prudent managers considered how easily their employees adapt to changes in their jobs and work environment. They considered how enthusiastic cooperation can be fostered in the creation of a liberated and reengineered office. This was determined not only by each individual's reaction to change, but also by the health care facility's track record with other system installations. For example, document image, diagnostic image, and coded data processing systems allow the integration of divergent health care information systems within complex institutions. Unfortunately, many institutions are currently struggling with how to create an information management architecture that will integrate their mature systems, such as their patient care and financial systems. Information managers must realize that if optical storage technology-based systems are used in a strategic and planned fashion, these systems can act as focal points for systems integration, not as promises to further confuse the issue. Another issue that needed attention in all the examples was the work environment. The managers considered how the work environment was going to affect the ability to integrate optical image and data systems into the institution. For example, many of these medical centers have created alliances with clinics, HMOs, and large corporate users of medical services. This created a demand for all or part of the health information outside the confines of the original institution. Since the work environment is composed of a handful of factors such as merged medical services, as many work environment factors as possible were addressed before application of the optical storage technology solution in the institutions. And finally, the third critical issue was the organization of work

  19. Capsule Contraction Syndrome with a Microincision Foldable Hydrophilic Acrylic Intraocular Lens: Two Case Reports and Review of the Literature

    Directory of Open Access Journals (Sweden)

    Angelo Balestrazzi

    2014-10-01

    Full Text Available Here we present 2 cases of capsule contraction syndrome (CCS. In both cases, a hydrophilic acrylic Akreos MI60 (Bausch and Lomb intraocular lens (IOL was implanted in the capsular bag through microincision cataract surgery, and the literature on the subject is reviewed. Since CCS has been described after the implantation of every IOL type, it is unlikely that the Akreos MI60 chemical and physical properties may cause CCS. When CCS occurs with IOLs composed of increasingly flexible materials that are inserted through incisions of decreasing size, a severe dislocation and deformation of IOL optics and haptics may develop. In both cases illustrated here, Nd:YAG laser anterior capsulotomy was highly effective. Hence, also based on the literature, which reports severe complications as a result of surgical intervention, it is suggested that Nd:YAG laser anterior capsulotomy be the first line of CCS treatment when the luxation of an IOL capsular bag is absent.

  20. Capsule contraction syndrome with a microincision foldable hydrophilic acrylic intraocular lens: two case reports and review of the literature.

    Science.gov (United States)

    Balestrazzi, Angelo; Malandrini, Alex; Martone, Gianluca; Marigliani, Davide; Caporossi, Tomaso; Tosi, Gian Marco

    2014-09-01

    Here we present 2 cases of capsule contraction syndrome (CCS). In both cases, a hydrophilic acrylic Akreos MI60 (Bausch and Lomb) intraocular lens (IOL) was implanted in the capsular bag through microincision cataract surgery, and the literature on the subject is reviewed. Since CCS has been described after the implantation of every IOL type, it is unlikely that the Akreos MI60 chemical and physical properties may cause CCS. When CCS occurs with IOLs composed of increasingly flexible materials that are inserted through incisions of decreasing size, a severe dislocation and deformation of IOL optics and haptics may develop. In both cases illustrated here, Nd:YAG laser anterior capsulotomy was highly effective. Hence, also based on the literature, which reports severe complications as a result of surgical intervention, it is suggested that Nd:YAG laser anterior capsulotomy be the first line of CCS treatment when the luxation of an IOL capsular bag is absent.

  1. Combined 20-gauge and 23-gauge pars plana vitrectomy for the management of posteriorly dislocated lens: a case series

    Directory of Open Access Journals (Sweden)

    Pipat Kongsap

    2010-06-01

    Full Text Available Pipat KongsapDepartment of Ophthalmology, Prapokklao Hospital, Chanthaburi, Thailand; Affiliated with the Faculty of Medicine, Chulalongkorn University, Bangkok, ThailandObjective: To present a new surgical approach for the management of posteriorly dislocated lens by using a combination of 20-gauge (20G and 23-gauge (23G pars plana vitrectomy.Design: An interventional case seriesMethods: This technique was performed on six patients (five men, one woman; mean age, 66.67 years; range, 66–72 years. Two 23G trans-conjunctival sclerotomy ports were created for infusion and illumination along with a 20G sclerotomy port for introducing the vitrectomy probe or fragmatome.Results: This procedure was successfully performed on six eyes. On postoperative day one, the media were clear and the retina could be seen by indirect ophthalmoscopy. Hyphema developed in one eye and resolved within a week. There were no observed cases of retinal tear, wound leakage, hypotony, or endophthalmitis. The post-operative follow-up period ranged from three to twelve months (mean, 8.1 months. By the final visit, two patients had achieved a visual acuity of 20/40 or better, three patients, 20/70, and one patient, 20/200.Conclusion: The combination of 20G and 23G pars plana vitrectomy is an efficacious and safe procedure for management of posteriorly dislocated lens.Keywords: lensectomy, fragmatome, sutureless vitrectomy

  2. Securing Internet Protocol (IP) Storage: A Case Study

    CERN Document Server

    Somayaji, Siva Rama Krishnan; 10.5121/ijngn.2010.2102

    2010-01-01

    Storage networking technology has enjoyed strong growth in recent years, but security concerns and threats facing networked data have grown equally fast. Today, there are many potential threats that are targeted at storage networks, including data modification, destruction and theft, DoS attacks, malware, hardware theft and unauthorized access, among others. In order for a Storage Area Network (SAN) to be secure, each of these threats must be individually addressed. In this paper, we present a comparative study by implementing different security methods in IP Storage network.

  3. Lens opacities in Bloom syndrome: case report and review of the literature.

    Science.gov (United States)

    Cefle, Kivanc; Ozturk, Sukru; Gozum, Nilufer; Duman, Nilgun; Mantar, Ferhan; Guler, Kerim; Palanduz, Sukru

    2007-09-01

    Bloom syndrome is an autosomal recessive disorder characterized by proportionate short stature, photosensitivity, immunodeficiency, hypogonadism and a tendency to develop various malignancies. The greatly increased frequency of sister chromatid exchanges (reciprocal exchange of homologous segments between the two sister chromatids of a chromosome) is regarded as pathognomonic for BS. We describe an 18-year old girl who presented with short stature. She was diagnosed with BS based on an extremely increased frequency of sister chromatid exchanges. Ophthalmological examination revealed mild lens opacities bilaterally, which, to our knowledge, has not been previously reported to be associated with BS.

  4. Contact lens fitting in a patient with Alport syndrome and posterior polymorphous corneal dystrophy: a case report

    Directory of Open Access Journals (Sweden)

    Juliana Maria da Silva Rosa

    2016-02-01

    Full Text Available ABSTRACT Alport Syndrome is a hereditary disease that is caused by a gene mutation and affects the production of collagen in basement membranes; this condition causes hemorrhagic nephritis associated with deafness and ocular changes. The X-linked form of this disease is the most common and mainly affects males. Typical ocular findings are dot-and-fleck retinopathy, anterior lenticonus, and posterior polymorphous corneal dystrophy. Some cases involving polymorphous corneal dystrophy and corneal ectasia have been previously described. Here we present a case report of a 33-year-old female with Alport syndrome, posterior polymorphous corneal dystrophy, and irregular astigmatism, whose visual acuity improved with a rigid gas permeable contact lens.

  5. Water Storage Instead of Energy Storage for Desalination Powered by Renewable Energy—King Island Case Study

    Directory of Open Access Journals (Sweden)

    Aya Tafech

    2016-10-01

    Full Text Available In this paper, we scrutinized the energy storage options used in mitigation of the intermittent nature of renewable energy resources for desalination process. In off-grid islands and remote areas, renewable energy is often combined with appropriate energy storage technologies (ESTs to provide a consistent and reliable electric power source. We demonstrated that in developing a renewable energy scheme for desalination purposes, product (water storage is a more reliable and techno-economic solution. For a King Island (Southeast Australia case-study, electric power production from renewable energy sources was sized under transient conditions to meet the dynamic demand of freshwater throughout the year. Among four proposed scenarios, we found the most economic option by sizing a 13 MW solar photovoltaic (PV field to instantly run a proportional RO desalination plant and generate immediate freshwater in diurnal times without the need for energy storage. The excess generated water was stored in 4 × 50 ML (mega liter storage tanks to meet the load in those solar deficit times. It was also demonstrated that integrating well-sized solar PV with wind power production shows more consistent energy/water profiles that harmonize the transient nature of energy sources with the water consumption dynamics, but that would have trivial economic penalties caused by larger desalination and water storage capacities.

  6. A case of abdominal pain with dyslipidemia: difficulties diagnosing cholesterol ester storage disease.

    Science.gov (United States)

    Cameron, S J; Daimee, U; Block, R C

    2015-01-01

    Cholesterol ester storage disease is an exceptionally rare dyslipidemia with less than 150 cases reported in the medical literature. The diagnosis of Cholesterol Ester Storage Disease is often missed by virtue of the fact that the symptoms mimic both inborn metabolic defects and hepatic steatosis. Patients with Cholesterol Ester Storage Disease usually present with atypical complaints including abdominal pain from altered gut motility. Blood analysis typically reveals abnormal liver function tests with coincident dyslipidemia. We present a case of a young woman with Cholesterol Ester Storage Disease who was followed over two decades. We discuss issues common to her initial protracted diagnosis with management options over time.

  7. Battery energy storage systems life cycle costs case studies

    Energy Technology Data Exchange (ETDEWEB)

    Swaminathan, S.; Miller, N.F.; Sen, R.K. [SENTECH, Inc., Bethesda, MD (United States)

    1998-08-01

    This report presents a comparison of life cycle costs between battery energy storage systems and alternative mature technologies that could serve the same utility-scale applications. Two of the battery energy storage systems presented in this report are located on the supply side, providing spinning reserve and system stability benefits. These systems are compared with the alternative technologies of oil-fired combustion turbines and diesel generators. The other two battery energy storage systems are located on the demand side for use in power quality applications. These are compared with available uninterruptible power supply technologies.

  8. Innovative Business Cases for Energy Storage In a Restructured Electricity Marketplace, A Study for the DOE Energy Storage Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    IANNUCCI, JOE; EYER, JIM; BUTLER, PAUL C.

    2003-02-01

    This report describes the second phase of a project entitled ''Innovative Business Cases for Energy Storage in a Restructured Electricity Marketplace''. During part one of the effort, nine ''Stretch Scenarios'' were identified. They represented innovative and potentially significant uses of electric energy storage. Based on their potential to significantly impact the overall energy marketplace, the five most compelling scenarios were identified. From these scenarios, five specific ''Storage Market Opportunities'' (SMOs) were chosen for an in-depth evaluation in this phase. The authors conclude that some combination of the Power Cost Volatility and the T&D Benefits SMOs would be the most compelling for further investigation. Specifically, a combination of benefits (energy, capacity, power quality and reliability enhancement) achievable using energy storage systems for high value T&D applications, in regions with high power cost volatility, makes storage very competitive for about 24 GW and 120 GWh during the years of 2001 and 2010.

  9. Polymicrobial Infection of the Cornea Due to Contact Lens Wear

    Science.gov (United States)

    Sızmaz, Selçuk; Bingöllü, Sibel; Erdem, Elif; Kibar, Filiz; Koltaş, Soner; Yağmur, Meltem; Ersöz, Reha

    2016-01-01

    A 38-year-old male presented with pain and redness in his left eye. He had a history of wearing contact lenses. His ophthalmic examination revealed a large corneal ulcer with surrounding infiltrate. Cultures were isolated from the contact lenses, lens solutions, storage cases, and conjunctivae of both eyes and also corneal scrapings of the left eye. Fortified vancomycin and amikacin drops were started hourly. Culture results of conjunctivae of each eye and left cornea were positive for Pseudomonas aeruginosa; cultures from the contact lenses, lens solution and storage case of both eyes revealed Pseudomonas aeruginosa and Alcaligenes xylosoxidans. Polymerase chain reaction of the corneal scraping was positive for Acanthameoba. The topical antibiotics were changed with ones that both bacteria were sensitive to and anti-amoebic therapy was added. The patient had two recurrences following initial presentation despite intensive therapy. Keratitis occurred due to multiple pathogens; the relapsing course despite adequate therapy is potentially associated with this polymicrobial etiology. PMID:27800266

  10. Clinical analysis of 49 cases with intraocular lens dislocation%人工晶状体脱位49例临床分析

    Institute of Scientific and Technical Information of China (English)

    王海燕; 庞秀琴; 何雷; 裴雪婷; 王绍莉; 卢海

    2012-01-01

    Objective To discuss the clinical characteristics of intraocular lens (IOL) dislocation. Design Retrospective cases series. Participants 49 eyes (49 cases) of intraocular lens dislocation in Beijing Tongren Hospital from 2004 to 2011. Methods Clinical data of intraocular lens dislocation were reviewed retrospectively. Main Outcome Measures Age, original disease, history of disease, position and type of intraocular lens, cause, surgical method, and complication. Results Majority of 49 cases of intraocular lens dislocation were cases with surgery of age-related cataract (46.9%) and traumatic cataract (28.6%). 6 cases with dislocation of intraocular lens with ciliary sulcus fixation happened 1 year after surgery. Majority of intraocular lenses dislocated located in vitreous body (53.1%) and "C" loop (89.8%). 75.5% of causes were original disease and surgery. Ciliary sulcus fixation or re-fixation of intraocular lens (47 eyes, 95.9%) could achieve good centration and stability of the intraocular lens. Naked vision of 0.1 or more accounted for 59.6% at 2 weeks after fixation or re-fixation. Conclusion Intraocular lens dislocation is related with original disease and surgery. Ciliary sulcus fixation of intraocular lens is an effective strategy to treat intraocular lens dislocation. But intraocular lens with ciliary sulcus fixation still happens to dislocate. (Ophthalmol CHN, 2012, 21: 47-51)%目的 探讨人工晶状体(IOL)脱位的临床特点.设计 回顾性病例系列.研究对象 北京同仁医院2004-2011年治疗的IOL脱位49例49眼.方法 对IOL脱位患者的临床资料进行同顾性分析.主要指标 年龄、原IOL植入原因,发病时间,脱位IOL位置及类型,IOL脱位诱因,手术治疗方法及并发症.结果 49眼IOL脱位中,老年性白内障和外伤性白内障摘除联合IOL植入术者较多,分别占46.9%、28.6%.6例睫状沟固定IOL脱位均发生于手术1年后.脱位IOL53.1%位于玻璃体腔内.89.8

  11. The potential pathogenicity of chlorhexidine-sensitive Acanthamoeba strains isolated from contact lens cases from asymptomatic individuals in Tenerife, Canary Islands, Spain.

    Science.gov (United States)

    Martín-Navarro, Carmen M; Lorenzo-Morales, Jacob; Cabrera-Serra, M Gabriela; Rancel, Fernando; Coronado-Alvarez, Nieves M; Piñero, José E; Valladares, Basilio

    2008-11-01

    Pathogenic strains of the genus Acanthamoeba are causative agents of a serious sight-threatening infection of the eye known as Acanthamoeba keratitis. The prevalence of this infection has risen in the past 20 years, mainly due to the increase in number of contact lens wearers. In this study, the prevalence of Acanthamoeba in a risk group constituted by asymptomatic contact lens wearers from Tenerife, Canary Islands, Spain, was evaluated. Contact lenses and contact lens cases were analysed for the presence of Acanthamoeba isolates. The isolates' genotypes were also determined after rDNA sequencing. The pathogenic potential of the isolated strains was subsequently established using previously described molecular and biochemical assays, which allowed the selection of three strains with high pathogenic potential. Furthermore, the sensitivity of these isolates against two standard drugs, ciprofloxacin and chlorhexidine, was analysed. As the three selected strains were sensitive to chlorhexidine, its activity and IC(50) were evaluated. Chlorhexidine was found to be active against these strains and the obtained IC(50) values were compared to the concentrations of this drug present in contact lens maintenance solutions. It was observed that the measured IC(50) was higher than the concentration found in these maintenance solutions. Therefore, the ineffectiveness of chlorhexidine-containing contact lens maintenance solutions against potentially pathogenic strains of Acanthamoeba is demonstrated in this study.

  12. Infantile Onset Glycogen Storage Disease Type 2: Case Report

    Directory of Open Access Journals (Sweden)

    Serkan Bilge Koca

    2014-08-01

    Full Text Available Glycogen storage disease type 2 (Pompe’s disease is an autosomal recessive, fatal glycogen storage disease presenting with hypotonia and muscle weakness. It is known that deficiency of lysosomal acid alpha-glucosidase (acid maltase leads to progressive generalised myopathy, cardiomyopathy and death in early infancy because of respiratory muscle weakness. Excessive undegradable intracellular glycogen deposition plays a role in the pathogenesis of the disease. Here we report a 3.5 month-old girl presenting with respiratory failure due to pneumonia and hypotonia, who was later diagnosed as Pompe disease.

  13. Electrical Energy Storage Systems Feasibility; the Case of Terceira Island

    Directory of Open Access Journals (Sweden)

    Ana Rodrigues

    2017-07-01

    Full Text Available The Azores Regional Government, through the Sustainable Energy Action Plan for the Azorean Islands, assumed that by the year 2018, 60% of electricity would be generated from renewable energy sources. Nevertheless, by increasing renewable energy sources share in the electricity mix, peak energy that exceeds grid capacity cannot be used unless when considering energy storage systems. Therefore, this article aims at determining, among batteries and Pumped Hydro Systems, the most cost-effective energy storage system to deploy in Terceira Island, along with geothermal, wind, thermal and bio waste energy, while considering demand and supply constraints. It is concluded that a pumped hydro system sited in Serra do Morião-Nasce Água is the best option for storage of the excess generated energy when compared with batteries. However, further studies should analyze environmental constraints. It is demonstrated that by increasing the storage power capacity, a pumped hydro system improves its cost efficiency when compared with batteries. It is also demonstrated that, to ensure quality, economic feasibility, reliability and a reduction of external costs, it is preferable to replace fuel-oil by wind to generate electricity up to a conceivable technical limit, while building a pumped hydro system, or dumping the excess peak energy generated.

  14. The effect of contact lens materials on disinfection activity of polyquaternium-1 and myristamidopropyl dimethylamine multipurpose solution against Staphylococcus aureus.

    Science.gov (United States)

    Shoff, Megan E; Lucas, Anne D; Phillips, K Scott; Brown, Jennifer N; Hitchins, Victoria M; Eydelman, Malvina B

    2012-11-01

    This study examined the interaction of seven different lens materials with a multipurpose solution (MPS) containing the disinfectants polyquaternium-1 (0.001%) and myristamidopropyl dimethylamine (0.0005%). The objective of this study was to determine whether the different lens materials affect the concentration of a disinfectant in this commercially available MPS and the efficacy of the disinfectant against Staphylococcus aureus. Silicone hydrogel lenses (galyfilcon A, senofilcon A, comfilcon A, enfilcon A, balafilcon A, and lotrafilcon B) and a conventional hydrogel lens (etafilcon A) were soaked in polypropylene lens cases filled with commercially available MPS containing 0.001% polyquaternium-1 and 0.0005% myristamidopropyl dimethylamine for 6, 12, 24, 72, and 168 hours. Empty lens cases were also filled with MPS. After each time point, solutions from cases containing the seven types of lenses and controls were assayed for activity against S. aureus according to International Standards Organization 14729 standard with modifications. Test solutions were analyzed for polyquaternium-1 and myristamidopropyl dimethylamine concentration at each time point. The concentration of polyquaternium-1 and myristamidopropyl dimethylamine remaining in the lens cases was reduced only slightly over time. Storage with the lenses did not adversely affect biocidal efficacy of the solution, and in some cases, it was significantly better (P=0.0029). The efficacy of this polyquaternium-1 and myristamidopropyl dimethylamine MPS to kill S. aureus was not adversely affected by the presence of lens materials soaking in the cases. Thus, current methods for performing solution antimicrobial testing should be reevaluated.

  15. [Intraocular lens implantation in developmental lens disorders in children].

    Science.gov (United States)

    Kanigowska, Krystyna; Grałek, Mirosława; Kepa, Beata; Chipczyńska, Barbara

    2009-01-01

    The pediatric cataract surgery in eyes with developmental disorders, stay with still considerable challenge. At children, the lasting vision development extorts necessity quick settlement of refraction defect formed after operation. The intraocular lens old boy with cataract in microspherophakia and 12 years old boy with cataract in lens with coloboma. One-piece flexible and rigid PMMA intraocular lens was placed with success at posterior chamber without scleral fixations and without using capsular tension ring in this cases. After 3 years of observation there were no decentration or dislocation of intraocular lens in both children. Authors concluded that in some cases posterior chamber intraocular lens implantation despite defective zonular or capsular support, can make up the effective method of surgical treatment without risk of early dislocation.

  16. Opacificação tardia de lente intra-ocular de polimetilmetacrilato (PMMA: relato de caso Late opacification of a polymethylmethacrylate (PMMA intraocular lens: case report

    Directory of Open Access Journals (Sweden)

    Otacílio de Oliveira Maia Júnior

    2005-10-01

    Full Text Available O implante das lentes intra-oculares foi grande avanço na reabilitação visual de pacientes submetidos à cirurgia de extração da catarata. Contudo, os materiais utilizados na fabricação destas lentes, apesar de terem boa biocompatibilidade, são passíveis de alterações posteriores ao implante. No presente estudo, os autores relatam um caso raro de opacificação tardia de lente de polimetilmetacrilato, material inerte e bem tolerado intra-ocularmente, discutindo aspectos importantes no manejo desta complicação, bem como indicação de explante e substituição da lente.The use of intraocular lenses was a great advance in visual recovery after cataract surgery. Although usually with good biocompatibility, some alterations in the intraocular lens material may occur after implantation. Polymethylmethacrylate was the first intraocular lens material to be used on a large scale and assumed to be inert and well-tolerated. We present a rare case of late opacification of a polymethylmethacrylate lens, discussing important aspects of its management such as the indication for intraocular lens exchange.

  17. Integrated underground gas storage of CO2 and CH4 for renewable energy storage for a test case in China

    Science.gov (United States)

    Kühn, Michael; Li, Qi; Nakaten, Natalie, Christine; Kempka, Thomas

    2017-04-01

    Integration and further development of the energy supply system in China is a major challenge for the years to come. Part of the strategy is the implementation of a low carbon energy system based on carbon dioxide capture and storage (CCS). The innovative idea presented here is based on an extension of the power-to-gas-to-power (PGP) technology by establishing a closed carbon dioxide cycle [1]. Thereto, hydrogen generated from excess renewable energy is transformed into methane for combustion in a combined cycle gas power plant. To comply with the fluctuating energy demand, carbon dioxide produced during methane combustion and required for the methanation process as well as excess methane are temporarily stored in two underground reservoirs located close to each other [2]. Consequently, renewable energy generation units can be operated even if energy demand is below consumption, while stored energy can be fed into the grid as energy demand exceeds production [3]. We studied a show case for Xinjiang in China [4] to determine the energy demand of the entire process chain based on numerical computer simulations for the operation of the CO2 and CH4 storage reservoirs, and to ascertain the pressure regimes present in the storage formations during the injection and production phases of the annual cycle. [1] Streibel M., Nakaten N., Kempka T., Kühn M. (2013) Analysis of an integrated carbon cycle for storage of renewables. Energy Procedia 40, 202-211. doi: 10.1016/j.egypro.2013.08.024. [2] Kühn M., Streibel M., Nakaten N.C., Kempka T. (2014) Integrated Underground Gas Storage of CO2 and CH4 to Decarbonise the "Power-to-gas-to-gas-to-power" Technology. Energy Procedia 59, 9-15. doi: 10.1016/j.egypro.2014.10.342 [3] Kühn M., Nakaten N.C., Streibel M., Kempka T. (2014) CO2 Geological Storage and Utilization for a Carbon Neutral "Power-to-gas-to-power" Cycle to Even Out Fluctuations of Renewable Energy Provision. Energy Procedia 63, 8044-8049. doi: 10.1016/j.egypro.2014

  18. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...... of probabilistic functionalism, and concerns the environment and the mind, and adaptation by the latter to the former. This entry is about the lens model, and probabilistic functionalism more broadly. Focus will mostly be on firms and their employees, but, to fully appreciate the scope, we have to keep in mind...

  19. A Case Study of University Honors Students in Humanities through a Disciplinary Literacy Lens

    Science.gov (United States)

    Cisco, Jonathan

    2016-01-01

    Students face challenging texts in higher education, whether they are discipline-specific journal articles or great works of literature. Building on research in content area reading and disciplinary literacy, this case study explores the various stances undergraduate honors students take when coping with challenging texts while enrolled in a…

  20. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...

  1. Recurrent iritis after implantation of an iris-fixated phakic intraocular lens for the correction of myopia Case report and clinicopathologic correlation.

    Science.gov (United States)

    Kleinmann, Guy; Apple, David J; Mackool, Richard J

    2006-08-01

    The iris-claw intraocular lens (IOL) was recently approved by the U.S. Food and Drug Administration for the correction of refractive disorders. Previous reports are not uniform regarding its potential to induce inflammatory reaction. We report the case of a young healthy patient who experienced persistent and intolerable iritis after implantation of an iris-claw IOL. The iritis was resolved only after explantation of the IOL.

  2. Exploring Chinese cultural standards through the lens of German managers: A case study approach

    Directory of Open Access Journals (Sweden)

    Roger Moser

    2011-06-01

    Full Text Available The ability to understand one’s own culture and to deal with specificities of foreign cultures is one of the core requirements in today’s international business. Management skills are partially culture specific and a management approach that is appropriate in one cultural context may not be appropriate in another. Several business activities of companies nowadays take place abroad, which requires managers to interact with different cultures. This paper aims to analyse cultural characteristics, especially in a Sino-German business context. Based on literature analysis and case study research, relevant cultural standards in China were identified from the German perspective. The result differentiates three superordinate cultural areas and five specific cultural standards and analyses different influence factors on the dimensions of the identified Chinese cultural standards.

  3. 18S Ribosomal DNA Typing and Tracking of Acanthamoeba Species Isolates from Corneal Scrape Specimens, Contact Lenses, Lens Cases, and Home Water Supplies of Acanthamoeba Keratitis Patients in Hong Kong

    OpenAIRE

    Booton, G. C.; Kelly, D J; Chu, Y.-W.; Seal, D. V.; Houang, E.; Lam, D S C; Byers, T. J.; Fuerst, P A

    2002-01-01

    We examined partial 18S ribosomal DNA (Rns) sequences of Acanthamoeba isolates cultured in a study of microbial keratitis in Hong Kong. Sequence differences were sufficient to distinguish closely related strains and were used to examine links between strains obtained from corneal scrape specimens, contact lenses, lens cases, lens case solutions, and home water-supply faucets of patients with Acanthamoeba. We also looked for evidence of mixed infections. Identification of Acanthamoeba Rns geno...

  4. Distributed storage and cloud computing: a test case

    Science.gov (United States)

    Piano, S.; Delia Ricca, G.

    2014-06-01

    Since 2003 the computing farm hosted by the INFN Tier3 facility in Trieste supports the activities of many scientific communities. Hundreds of jobs from 45 different VOs, including those of the LHC experiments, are processed simultaneously. Given that normally the requirements of the different computational communities are not synchronized, the probability that at any given time the resources owned by one of the participants are not fully utilized is quite high. A balanced compensation should in principle allocate the free resources to other users, but there are limits to this mechanism. In fact, the Trieste site may not hold the amount of data needed to attract enough analysis jobs, and even in that case there could be a lack of bandwidth for their access. The Trieste ALICE and CMS computing groups, in collaboration with other Italian groups, aim to overcome the limitations of existing solutions using two approaches: sharing the data among all the participants taking full advantage of GARR-X wide area networks (10 GB/s) and integrating the resources dedicated to batch analysis with the ones reserved for dynamic interactive analysis, through modern solutions as cloud computing.

  5. Case report: hypoparathyroidism and iron storage disease. Treatment with 25-hydroxy-vitamin D3.

    Science.gov (United States)

    Mautalen, C A; Kvicala, R; Perriard, D; Bugnard, E; Rossi, E; Duhart, J

    1978-01-01

    A patient in whom hypoparathyroidism developed as a complication of posttransfusional iron storage disease is described. The hypoparathyroidism occurred after more than 15 years of receiving blood transfusions at frequent intervals. In this patient with thalassemia major the serum PTH levels were undetectable. 25-hydroxy-vitamin D3 corrected the hypocalcemia that was resistant to vitamin D2, probably due to the associated liver dysfunction. Other cases reported in the literature are reviewed. It is suggested that hypoparathyroidism occurs more frequently than usually suspected in patients with iron storage disease.

  6. Glycogen storage disease: report of two cases in the city of Cartagena

    Directory of Open Access Journals (Sweden)

    Ciro C. Alvear

    2010-03-01

    Full Text Available Objective: to report two cases of children with type Ia glycogen storage disease compatible with Von Gierke disease, suspected in the presence of findings such as hepatomegaly, nephromegaly, hypoglycemia, and stunted growth.Method: Presentation of the clinical records of two patients referred to the diagnostic unit of innate errors of metabolism of the Faculty of Medicine in Universidad de Cartagena.Results: The first case reported was a child who debuted with acute cyanosis without widespread neurological deficit when he was eleven months old, followed by hepatomegaly at two years of age. At 4 years of age, symptoms reappeared with similar characteristics: hypoglycemia, growth failure, and persistent hepatomegaly detected on physical examination. With the precedent that an older brother that presented similar symptoms was suspected of glycogen storage disease, a biopsy was performed and confirmed liver glycogen storage with normal structure. The patient’s treatment was modification of dietary habits (small, frequent feedings during the day and cornstarch. The second event was the older brother who consulted for the first time when he was 18 months old due to prolonged diarrhea. Hepatomegaly was documented by ultrasound study without kidney compromise and no hypoglycemia was found.Recommendations: It is necessary for the entire health team to be trained to detect rare diseases such as glycogen storage disease. If they make early diagnoses and establish support groups for interdisciplinary management of such diseases, they may change the prognosis and quality of life of these children.

  7. Glycogen storage disease: report of two cases in the city of Cartagena

    Directory of Open Access Journals (Sweden)

    Ciro C. Alvear

    2010-09-01

    Full Text Available Objective: to report two cases of children with type Ia glycogen storage disease compatible with Von Gierke disease, suspected in the presence of findings such as hepatomegaly, nephromegaly, hypoglycemia, and stunted growth. Method: Presentation of the clinical records of two patients referred to the diagnostic unit of innate errors of metabolism of the Faculty of Medicine in Universidad de Cartagena. Results: The first case reported was a child who debuted with acute cyanosis without widespread neurological deficit when he was eleven months old, followed by hepatomegaly at two years of age. At 4 years of age, symptoms reappeared with similar characteristics: hypoglycemia, growth failure, and persistent hepatomegaly detected on physical examination. With the precedent that an older brother that presented similar symptoms was suspected of glycogen storage disease, a biopsy was performed and confirmed liver glycogen storage with normal structure. The patient’s treatment was modification of dietary habits (small, frequent feedings during the day and cornstarch. The second event was the older brother who consulted for the first time when he was 18 months old due to prolonged diarrhea. Hepatomegaly was documented by ultrasound study without kidney compromise and no hypoglycemia was found. Recommendations: It is necessary for the entire health team to be trained to detect rare diseases such as glycogen storage disease. If they make early diagnoses and establish support groups for interdisciplinary management of such diseases, they may change the prognosis and quality of life of these children.

  8. Fusarium and Candida albicans biofilms on soft contact lenses: model development, influence of lens type and susceptibility to lens care solutions

    Science.gov (United States)

    Fungal keratitis is commonly caused by Fusarium species, while cases of Candida-associated keratitis are less frequent. Recent outbreaks of Fusarium keratitis were associated with contact lens wear and with MoistureLoc contact lens care solution, and biofilm formation on contact lens/lens cases was...

  9. Pathogenesis of Morquio A syndrome: an autopsied case reveals systemic storage disorder.

    Science.gov (United States)

    Yasuda, Eriko; Fushimi, Kazunari; Suzuki, Yasuyuki; Shimizu, Katsuji; Takami, Tsuyoshi; Zustin, Jozef; Patel, Pravin; Ruhnke, Kristen; Shimada, Tsutomu; Boyce, Bobbie; Kokas, Terry; Barone, Carol; Theroux, Mary; Mackenzie, William; Nagel, Barbara; Ryerse, Jan S; Orii, Kenji E; Iida, Hiroki; Orii, Tadao; Tomatsu, Shunji

    2013-07-01

    Mucopolysaccharidosis IVA (MPS IVA; Morquio A syndrome) is a lysosomal storage disorder caused by deficiency of N-acetylgalactosamine-6-sulfate sulfatase, which results in systemic accumulation of glycosaminoglycans (GAGs), keratan sulfate and chondroitin-6-sulfate. Accumulation of these GAGs causes characteristic features as disproportionate dwarfism associated with skeletal deformities, genu valgum, pigeon chest, joint laxity, and kyphoscoliosis. However, the pathological mechanism of systemic skeletal dysplasia and involvement of other tissues remain unanswered in the paucity of availability of an autopsied case and successive systemic analyses of multiple tissues. We report here a 20-year-old male autopsied case with MPS IVA, who developed characteristic skeletal features by the age of 1.5 years and died of acute respiratory distress syndrome five days later after occipito-C1-C2 cervical fusion. We pathohistologically analyzed postmortem tissues including trachea, lung, thyroid, humerus, aorta, heart, liver, spleen, kidney, testes, bone marrow, and lumbar vertebrae. The postmortem tissues relevant with clinical findings demonstrated 1) systemic storage materials in multiple tissues beyond cartilage, 2) severely vacuolated and ballooned chondrocytes in trachea, humerus, vertebrae, and thyroid cartilage with disorganized extracellular matrix and poor ossification, 3) appearance of foam cells and macrophages in lung, aorta, heart valves, heart muscle, trachea, visceral organs, and bone marrow, and 4) storage of chondrotin-6-sulfate in aorta. This is the first autopsied case with MPS IVA whose multiple tissues have been analyzed pathohistologically and these pathological findings should provide a new insight into pathogenesis of MPS IVA.

  10. Phakic Pattern Pseudoexfoliation Material Accumulation on Intraocular Lens Surface

    Directory of Open Access Journals (Sweden)

    Emre Güler

    2014-03-01

    Full Text Available Pseudophakic pseudoexfoliation is the accumulation of pseudoexfoliation material on the intraocular lens. Most of the cases have showed scattered flecks of pseudoexfoliation material on the surface of the intraocular lens. However, the phakic pattern consisting of classic three-zone on the intraocular lens is rarely observed. In this case report, we describe a phakic pattern pseudoexfoliation material on the intraocular lens surface 8 years after cataract extraction. (Turk J Ophthalmol 2014; 44: 156-7

  11. Phakic Pattern Pseudoexfoliation Material Accumulation on Intraocular Lens Surface

    OpenAIRE

    Emre Güler; Aylin Tenlik; Tuba Kara Akyüz

    2014-01-01

    Pseudophakic pseudoexfoliation is the accumulation of pseudoexfoliation material on the intraocular lens. Most of the cases have showed scattered flecks of pseudoexfoliation material on the surface of the intraocular lens. However, the phakic pattern consisting of classic three-zone on the intraocular lens is rarely observed. In this case report, we describe a phakic pattern pseudoexfoliation material on the intraocular lens surface 8 years after cataract extraction. (Turk J Ophthalm...

  12. Forensic Investigation of Cooperative Storage Cloud Service: Symform as a Case Study.

    Science.gov (United States)

    Teing, Yee-Yang; Dehghantanha, Ali; Choo, Kim-Kwang Raymond; Dargahi, Tooska; Conti, Mauro

    2016-11-25

    Researchers envisioned Storage as a Service (StaaS) as an effective solution to the distributed management of digital data. Cooperative storage cloud forensic is relatively new and is an under-explored area of research. Using Symform as a case study, we seek to determine the data remnants from the use of cooperative cloud storage services. In particular, we consider both mobile devices and personal computers running various popular operating systems, namely Windows 8.1, Mac OS X Mavericks 10.9.5, Ubuntu 14.04.1 LTS, iOS 7.1.2, and Android KitKat 4.4.4. Potential artefacts recovered during the research include data relating to the installation and uninstallation of the cloud applications, log-in to and log-out from Symform account using the client application, file synchronization as well as their time stamp information. This research contributes to an in-depth understanding of the types of terrestrial artifacts that are likely to remain after the use of cooperative storage cloud on client devices.

  13. 76 FR 39869 - Lee 8 Storage Partnership; Notice of Motion for Extension of Rate Case Filing Deadline

    Science.gov (United States)

    2011-07-07

    ... Energy Regulatory Commission Lee 8 Storage Partnership; Notice of Motion for Extension of Rate Case Filing Deadline Take notice that on June 27, 2011, Lee 8 Storage Partnership (Lee 8) filed a request for.... Eastern Time on Monday, July 11, 2011. Dated: June 28, 2011. Nathaniel J. Davis, Sr., Deputy...

  14. Contact lens in keratoconus

    Directory of Open Access Journals (Sweden)

    Varsha M Rathi

    2013-01-01

    Full Text Available Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP lenses, soft and soft toric lenses, piggy back contact lenses (PBCL, hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL.

  15. Public Responses to CO2 Storage Sites. Lessons from Five European Cases

    Energy Technology Data Exchange (ETDEWEB)

    Oltra, C.; Boso, A. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas CIEMAT, Madrid (Spain); Upham, P. [Finnish Environment Institute, Helsinki and Centre for Integrated Energy Research, University of Leeds, Leeds (United Kingdom); Riesch, H. [Centre for Environmental Policy, Imperial College London, London (United Kingdom); Brunsting, S. [ECN Policy Studies, Energy Research Centre of the Netherlands ECN, Amsterdam (Netherlands); Duetschke, E. [Fraunhofer-Institut fuer System- und Innovationsforschung ISI, Karlsruhe (Germany); Lis, A. [Department of Sociology and Social Anthropology, Central European University, Budapest (Hungary)

    2012-05-24

    Studies of the factors involved in public perceptions of CO2 storage projects reveal a level of complexity and diversity that arguably confounds a comprehensive theoretical account. To some extent, a conceptual approach that simply organises the relevant social scientific knowledge thematically, rather than seeking an integrated explanation, is as useful as any single account that fails to do justice to the contingencies involved. This paper reviews and assembles such knowledge in terms of six themes and applies these themes to five European cases of carbon capture and storage (CCS) implementation. We identify the main factors involved in community responses to CCS as relating to: the characteristics of the project; the engagement process; risk perceptions; the actions of the stakeholders; the characteristics of the community, and the socio-political context.

  16. Structured storage in ATLAS Distributed Data Management: use cases and experiences

    CERN Document Server

    Lassnig, M; The ATLAS collaboration; Molfetas, A; Beermann, T; Dimitrov, G; Canali, L; Zang, D; Chinzer, LA

    2012-01-01

    The distributed data management system of the high-energy physics experiment ATLAS has a critical dependency on the Oracle Relational Database Management System. Recently however, the increased appearance of data warehouse-like workload in the experiment has put considerable and increasing strain on the Oracle database. In particular, the analysis of archived data, and the aggregation of data for summary purposes has been especially demanding. For this reason, structured storage systems were evaluated to offload the Oracle database, and to handle processing of data in a non-transactional way. This includes distributed file systems like HDFS that support parallel execution of computational tasks on distributed data, as well as non-relational databases like HBase, Cassandra, or MongoDB. In this paper, the most important analysis and aggregation use cases of the data management system are presented, and how structured storage systems were established to process them.

  17. 18S ribosomal DNA typing and tracking of Acanthamoeba species isolates from corneal scrape specimens, contact lenses, lens cases, and home water supplies of Acanthamoeba keratitis patients in Hong Kong.

    Science.gov (United States)

    Booton, G C; Kelly, D J; Chu, Y-W; Seal, D V; Houang, E; Lam, D S C; Byers, T J; Fuerst, P A

    2002-05-01

    We examined partial 18S ribosomal DNA (Rns) sequences of Acanthamoeba isolates cultured in a study of microbial keratitis in Hong Kong. Sequence differences were sufficient to distinguish closely related strains and were used to examine links between strains obtained from corneal scrape specimens, contact lenses, lens cases, lens case solutions, and home water-supply faucets of patients with Acanthamoeba. We also looked for evidence of mixed infections. Identification of Acanthamoeba Rns genotypes was based on sequences of approximately 113 bp within the genus-specific amplicon ASA.S1. This permitted genotype identification by using nonaxenic cultures. Of 13 specimens obtained from corneal scrapes, contact lenses, lens cases, or lens case solutions, 12 were Rns genotype T4 and the remaining one was Rns genotype T3. The sequences of corneal scrape specimens of two patients also were the same as those obtained from their contact lenses or lens case specimens. A possible triple-strain infection was indicated by three different T4 sequences in cultures from one patient's lenses. Although faucet water used by patients to clean their lenses is a possible source of infections, specimens isolated from the faucets at two Acanthamoeba keratitis patients' homes differed from their corneal scrape or lens specimens. The overall results demonstrate the potential of this Rns region for tracking Acanthamoeba keratitis strains in infections and for distinguishing single-strain and closely related multiple-strain infections even when other microorganisms might be present with the cultured specimens. They also confirm the predominance of Rns genotype T4 strains in Acanthamoeba keratitis infections.

  18. The Medical Nutritional Therapy for Glycogen Storage Diseases:Case Report and Literature Review

    Institute of Scientific and Technical Information of China (English)

    Chun-wei LI; Kang YU; Rong-rong LI; Ming LI; Min-jie ZHANG

    2014-01-01

    Glycogen storage diseases (GSDs) are a group of inherited metabolic diseases caused by inherited defects in one of enzymes in glycogenolysis or/and gluconeogenesis. The morbidity of GSDs ranges from 0.04% to 0.05%, according to European data. Since limited data are available, more studies are needed in diagnosis and treatment of GSDs. To date, medical nutritional therapy (MNT) has become an effective measure in improving the clinical outcome of GSDs patients. We reported 4 cases of GSDs with different manifestations, including hypoglycemia, hepatomegaly, splenomegaly and growth retardation. We also provided individualized nutritional interventions and literature review was conducted as well.

  19. Polymicrobial Infection of the Cornea Due to Contact Lens Wear

    Directory of Open Access Journals (Sweden)

    Selçuk Sızmaz

    2016-04-01

    Full Text Available A 38-year-old male presented with pain and redness in his left eye. He had a history of wearing contact lenses. His ophthalmic examination revealed a large corneal ulcer with surrounding infiltrate. Cultures were isolated from the contact lenses, lens solutions, storage cases, and conjunctivae of both eyes and also corneal scrapings of the left eye. Fortified vancomycin and amikacin drops were started hourly. Culture results of conjunctivae of each eye and left cornea were positive for Pseudomonas aeruginosa; cultures from the contact lenses, lens solution and storage case of both eyes revealed Pseudomonas aeruginosa and Alcaligenes xylosoxidans. Polymerase chain reaction of the corneal scraping was positive for Acanthameoba. The topical antibiotics were changed with ones that both bacteria were sensitive to and anti-amoebic therapy was added. The patient had two recurrences following initial presentation despite intensive therapy. Keratitis occurred due to multiple pathogens; the relapsing course despite adequate therapy is potentially associated with this polymicrobial etiology.

  20. Gram negative bacteria and contact lens induced acute red eye

    Directory of Open Access Journals (Sweden)

    Sankaridurg Padmaja

    1996-01-01

    Full Text Available Two patients using hydrogel contact lenses on a daily wear schedule slept overnight with the lenses and woke up with a Contact Lens Induced Acute Red Eye (CLARE. The contact lenses recovered aseptically at the time of the event grew significant colonies of Pseudomonas aeruginosa and Aeromonas hydrophila in patient A and Pseudomonas aeruginosa and Serratia liquefaciens from patient B. Similar organisams from the contact lenses were recovered from the lens case and lens care solutions of patient B. In both the patients the condition resolved on discontinuation of lens wear. Patient compliance as a requirement for successful contact lens wear is highlighted with the illustration of these cases.

  1. Severe chronic diarrhea and weight loss in cholesteryl ester storage disease: A case report

    Institute of Scientific and Technical Information of China (English)

    Uta Drebber; Matthias Andersen; Hans U Kasper; Peter Lohse; Manfred Stolte; Hans P Dienes

    2005-01-01

    AIM: An inherited deficiency of human lysosomal acid lipase (LAL)results in the rare conditions of Wolman disease and cholesteryl ester storage disease (CESD). We want to present the rare case of CESD in an adult.METHODS: We report about an adult female patient with severe chronic diarrhea and weight loss as a consequence of CESD. Clinical examination revealed signs of malabsorption and slightly elevated liver enzymes.RESULTS: Histopathologic changes in the liver tissue and DNA sequence analysis confirmed the diagnosis of CESD due to homozygosity for the most common CESD mutation,a G934A splice site defect encoded by exon 8 of the lysosomal acid lipase (LIPA) gene.CONCLUSION: It is the first case in the literature with diarrhea as a putative symptom of CESD in adult patients.

  2. Opposed-phase MR imaging of lipid storage myopathy in a case of Chanarin-Dorfman disease

    Energy Technology Data Exchange (ETDEWEB)

    Gaeta, Michele; Celona, Antonio; Racchiusa, Sergio; Mazziotti, Silvio [University of Messina, Department of Radiological Sciences, Messina (Italy); Minutoli, Fabio [University of Messina, Department of Radiological Sciences, Messina (Italy); A.O.U. ' ' Policlinico G. Martino' ' , Dipartimento di Scienze Radiologiche, Messina (Italy); Toscano, Antonio; Musumeci, Olimpia [University of Messina, Department of Neurosciences, Psychiatry and Anaesthesiology, Messina (Italy)

    2008-11-15

    Chanarin-Dorfman disease (CDD) is a rare genetic disorder characterized by ichthyosis, myopathy, central nervous system disturbances, and intracellular lipid storage in muscle fibers, hepatocytes, and granulocytes. We describe skeletal muscle magnetic resonance imaging findings in a case of CDD, outlining the potential role of GE T1-weighted opposed-phase sequence (chemical shift imaging) in the evaluation of lipid storage myopathies. (orig.)

  3. Rapid cooled lens cell

    Science.gov (United States)

    Stubbs, David M.; Hsu, Ike C.

    1991-12-01

    This paper describes the optomechanical design, thermal analysis, fabrication, and test evaluation processes followed in developing a rapid cooled, infrared lens cell. Thermal analysis was the key engineering discipline exercised in the design phase. The effect of thermal stress on the lens, induced by rapid cooling of the lens cell, was investigated. Features of this lens cell that minimized the thermal stress will be discussed in a dedicated section. The results of thermal analysis on the selected lens cell design and the selection of the flow channel design in the heat exchanger will be discussed. Throughout the paper engineering drawings, illustrations, analytical results, and photographs of actual hardware are presented.

  4. Smart Grids for Aquifer Thermal Energy Storage (ATES): a case study for the Amsterdam Zuidas district

    Science.gov (United States)

    Jaxa-Rozen, Marc; Bloemendal, Martin; Rostampour, Vahab

    2017-04-01

    In the context of increasingly strict requirements for building energy efficiency, Aquifer Thermal Energy Storage (ATES) systems have emerged as an effective means to reduce energy demand for space heating and cooling in larger buildings. In the Netherlands, over 2000 systems are currently active, which has already raised issues with spatial planning in some areas; current planning schemes may lack the flexibility to properly address variations in ATES operation, which are driven by uncertainties across a broad range of time scales - from daily changes in building energy demand, to decadal trends for climate or groundwater conditions. This work is therefore part of a broader research effort on ATES Smart Grids (ATES-SG), which has focused on more adaptive methods for ATES management and control. In particular, improved control schemes which allow for coordination between neighboring ATES systems may offer more robust performance under uncertainty (Rostampour & Keviczky, 2016). The case studies for the ATES-SG project have so far focused on idealized cases, and on a historical simulation of ATES development in the city center of Utrecht. This poster will present an additional case study for the city center of Amsterdam, which poses several geohydrological challenges for ATES: for instance, variable density flow due to salinity gradients in the local aquifer, and varying depths for ATES systems due to the thickness of the aquifer. To study the effect of these conditions, this case uses an existing 15-layer geohydrological model of the Amsterdam region, cropped to an area of 4500m x 2500m around the Amsterdam Zuidas district. This rapidly developing business district is one of the densest areas of ATES use in Amsterdam, with 32 well doublets and 53 monowells currently registered. The geohydrological model is integrated with GIS data to accurately represent ATES spatial planning; simulated well flows are provided by a model predictive control component. This model is

  5. Hydrogen Energy Storage and Power-to-Gas: Establishing Criteria for Successful Business Cases

    Energy Technology Data Exchange (ETDEWEB)

    Eichman, Joshua; Melaina, Marc

    2015-10-27

    As the electric sector evolves and increasing amounts of variable generation are installed on the system, there are greater needs for system flexibility, sufficient capacity and greater concern for overgeneration. As a result there is growing interest in exploring the role of energy storage and demand response technologies to support grid needs. Hydrogen is a versatile feedstock that can be used in a variety of applications including chemical and industrial processes, as well as a transportation fuel and heating fuel. Traditionally, hydrogen technologies focus on providing services to a single sector; however, participating in multiple sectors has the potential to provide benefits to each sector and increase the revenue for hydrogen technologies. The goal of this work is to explore promising system configurations for hydrogen systems and the conditions that will make for successful business cases in a renewable, low-carbon future. Current electricity market data, electric and gas infrastructure data and credit and incentive information are used to perform a techno-economic analysis to identify promising criteria and locations for successful hydrogen energy storage and power-to-gas projects. Infrastructure data will be assessed using geographic information system applications. An operation optimization model is used to co-optimizes participation in energy and ancillary service markets as well as the sale of hydrogen. From previous work we recognize the great opportunity that energy storage and power-to-gas but there is a lack of information about the economic favorability of such systems. This work explores criteria for selecting locations and compares the system cost and potential revenue to establish competitiveness for a variety of equipment configurations. Hydrogen technologies offer unique system flexibility that can enable interactions between multiple energy sectors including electric, transport, heating fuel and industrial. Previous research established that

  6. Lightweight autoclavable wide-angle contact lens for vitreous surgery.

    Science.gov (United States)

    Chalam, K V; Gupta, Shailesh K; Agarwal, Swati

    2007-01-01

    The authors describe an autoclavable, self-stabilizing, lightweight wide-angle contact lens for vitrectomy. The lens has two optical pieces with perforated plastic casing to sustain a high temperature (150 degrees C) for autoclaving. The lens has a 106 degrees static and 127 degrees dynamic field of view. The footplates and reduced weight (2.4 grams) due to the plastic casing allow self-stabilization of the lens. The open lens design.with high temperature resistant plastic prevents fogging during autoclaving and surgery. The autoclavable, self-stabilizing, lightweight wide-angle contact lens allows visualization of the peripheral retina during surgery and faster sterilization by autoclaving between surgeries without the disadvantage of lens fogging.

  7. Time resolved thermal lens in edible oils

    Science.gov (United States)

    Albuquerque, T. A. S.; Pedreira, P. R. B.; Medina, A. N.; Pereira, J. R. D.; Bento, A. C.; Baesso, M. L.

    2003-01-01

    In this work time resolved thermal lens spectrometry is applied to investigate the optical properties of the following edible oils: soya, sunflower, canola, and corn oils. The experiments were performed at room temperature using the mode mismatched thermal lens configuration. The results showed that when the time resolved procedure is adopted the technique can be applied to investigate the photosensitivity of edible oils. Soya oil presented a stronger photochemical reaction as compared to the other investigated samples. This observation may be relevant for future studies evaluating edible oils storage conditions and also may contribute to a better understanding of the physical and chemical properties of this important foodstuff.

  8. Deformidade corneana em usuário de lente de contato portador de ceratocone: relato de caso Corneal warpage in contact lens wearer with keratoconus: a case report

    Directory of Open Access Journals (Sweden)

    César Lipener

    1999-12-01

    wearer with keratoconus who developed corneal warpage symptoms that were diag-nosed and studied by topographies and a series of clinical examinations. Case report: A forty-year-old patient with diagnosis of bilateral keratoconus for 12 years was wearing rigid gas permeable contact lenses since the initial diagnosis. On the first exa-mination in 05/95, it was impossible to determine the RE refraction and keratometry was more than 60.00 D. Topogra-phy was carried out being compatible with keratoconus and a Soper RGP lens was fitted with a 20/70 vision. One year later a control topography showed an increase in the central curve and a flattening of the inferior periphery. The use of contact lenses was interrupted and after further six months there was a reversal of the changes, and a new Soper lens was fitted with a better pattern and a 20/40 vision. Discussion: This case shows the occurrence of corneal de-formity in a keratoconus patient using RGP lenses. The au-thor discusses the pathophysiology and clinical and topographical diagnosis of corneal warpage, emphasizing the fact that patients with keratoconus as well as normal patients, can have these alterations which should be differentiated from the keratoconus evolution itself.

  9. Conjugate metamaterials and the perfect lens

    CERN Document Server

    Xu, Yadong; Xu, Lin; Chen, Huanyang

    2015-01-01

    In this letter, we show how transformation optics makes it possible to design what we call conjugate metamaterials. We show that these materials can also serve as substrates for making a subwavelength-resolution lens. The so-called "perfect lens", which is a lens that could focus all components of light (including propagating and evanescent waves), can be regarded as a limiting case, in which the respective conjugate metamaterials approach the characteristics of left-handed metamaterials, which have a negative refractive index.

  10. Lente intra-ocular opaca em diplopia intratável: relato de caso Opaque intraocular lens in intractable diplopia: case report

    Directory of Open Access Journals (Sweden)

    Fernanda Teixeira Krieger

    2006-08-01

    Full Text Available Diplopia intratável tem sido descrita em várias situações. Métodos convencionais como prismas e correção cirúrgica do estrabismo falham em neutralizá-la. O objetivo do trabalho é documentar o caso de uma paciente com estrabismo de longa data, cuja diplopia deteriorou-se ao longo dos anos, e não foi possível resolução com cirurgia, prisma, e oclusão com óculos e lente de contato com pupila opaca. A paciente foi então submetida à facoemulsificação com implante de lente intra-ocular opaca que atingiu o objetivo desejado.Intractable diplopia has been described in many situations but poor results are the rule with standard treatment modalities. The authors report a case of a woman with long-standing strabismus and diplopia who failed to improve following surgery, prism, and occlusive spectacles or contact lenses. Then, she was submitted to phacoemulsification and opaque intraocular lens implantation, which successfully neutralized diplopia.

  11. Pupil-occluding organized hyphema anterior to the intraocular lens treated by neodymium: yttrium-aluminum-garnet laser: a case report

    Science.gov (United States)

    Kim, Moosang; Lee, Seung-Jun; Han, Sang Beom; Yang, Hee Kyung; Hyon, Joon Young

    2016-01-01

    We report, to our best knowledge, the first case of treatment of pupil-occluding postoperative organized hyphema anterior to the intraocular lens (IOL) using neodymium: yttrium-aluminum-garnet (Nd:YAG) laser. A 78-year-old Asian female underwent uneventful cataract operation. She had been taking aspirin, which she discontinued 1 week before surgery. Iris prolapse occurred at the end of the surgery, which led to intracameral bleeding. Two weeks later, her best-corrected visual acuity was hand motion. Although hyphema had decreased, pupil-occluding organized hematoma had formed anterior to the IOL. The blood clot anterior to the IOL was removed using Nd:YAG laser. One week later, although the hematoma anterior to the IOL resolved, endocapsular hematoma was observed, which was dispersed with Nd:YAG laser posterior capsulotomy. Two weeks later, her best-corrected visual acuity improved to 20/60. There was no complication associated with Nd:YAG laser. In conclusion, pupil-occluding organized hyphema anterior to the IOL can occur as a complication of cataract surgery, in which Nd:YAG laser can be a useful treatment option. PMID:27462181

  12. Contact lens in keratoconus

    OpenAIRE

    Varsha M Rathi; Preeji S Mandathara; Srikanth Dumpati

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the En...

  13. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    OpenAIRE

    Elena Bonafonte Marquez; Sergio Bonafonte Royo

    2015-01-01

    We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL) implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for i...

  14. Iatrogenic Lens Injuries

    Directory of Open Access Journals (Sweden)

    Ümit Kamış

    2012-12-01

    Full Text Available During intraocular surgery, undesired damages of various etiology may occur in adjacent tissues. One of these tissues is the crystalline lens, which may be traumatized both in anterior segment and posterior segment surgeries, and when damaged, it usually causes marked decrease in visual acuity. The leading causes of iatrogenic lens injuries are intravitreal injection, laser iridotomy, phakic intraocular lens implantation, anterior chamber paracentesis, and vitreoretinal surgery. When crystalline lens damage occurs, its negative effect on visual function may be eliminated by performing cataract surgery intraoperatively or in elective conditions. (Turk J Ophthalmol 2012; 42: Supplement 27-30

  15. Reaction and transport in wellbore interfaces under CO2 storage conditions: Experiments simulating debonded cement-casing interfaces

    NARCIS (Netherlands)

    Wolterbeek, T.K.T.; Peach, C.J.; Spiers, C.J.

    2013-01-01

    Debonding-defects at the interfaces between wellbore casing and cement are widely recognized as providing potential pathways for CO2 escape from geological storage systems. This study addresses how chemical reaction between CO2, cement and steel may affect the transport properties of such defects un

  16. Phases of school health promotion implementation through the lens of complexity theory: lessons learnt from an Austrian case study.

    Science.gov (United States)

    Kremser, W

    2011-06-01

    The implementation of health promotion concepts in (school) settings is a complex undertaking on which little scientific knowledge exists. The purpose of this study was to better understand organizational influences on the implementation of school health promotion. An extended case study design that incorporated important insights from complexity science was used. This design influenced the focus of analysis and led to the use of multiple methods of data collection and analysis. A primary school in Vienna served as a case for observing and analysing the first year of implementing the health-promoting school concept. The study provided detailed insights into the implementation process. Results showed four chronologically overlapping implementation phases (starting health promotion, deciding what to do, planning health promotion projects, doing health promotion) on different system levels. In each phase, the original health-promoting school concept was adapted to the necessities and characteristics of each level and, therefore, changed considerably. Implications for possible adaptations of the health-promoting school concept to better fit the situation in schools are discussed.

  17. The role of the underground for massive storage of energy: a preliminary glance of the French case

    Science.gov (United States)

    Audigane, Pascal; Gentier, Sylvie; Bader, Anne-Gaelle; Beccaletto, Laurent; Bellenfant, Gael

    2014-05-01

    The question of storing energy in France has become of primary importance since the launch of a road map from the government which places in pole position this topic among seven major milestones to be challenged in the context of the development of innovative technology in the country. The European objective to reach 20% of renewables in the energy market, from which a large part would come from wind and solar power generation, raises several issues regarding the capacity of the grid to manage the various intermittent energy sources in line with the variability of the public demand and offer. These uncertainties are highly influenced by unpredictable weather and economic fluctuations. To facilitate the large-scale integration of variable renewable electricity sources in grids, massive energy storage is needed. In that case, electric energy storage techniques involving the use of underground are often under consideration as they offer a large storage capacity volume with a adapted potential of confining and the space required for the implantation. Among the panel of massive storage technologies, one can find (i) the Underground Pumped Hydro-Storage (UPHS) which are an adaptation of classical Pumped Hydro Storage system often connected with dam constructions, (ii) the compressed air storage (CAES) and (iii) the hydrogen storage from conversion of electricity into H2 and O2 by electrolysis. UPHS concept is based on using the potential energy between two water reservoirs positioned at different heights. Favorable natural locations like mountainous areas or cliffs are spatially limited given the geography of the territory. This concept could be extended with the integration of one of these reservoirs in an underground cavities (specifically mined or reuse of preexisting mines) to increase opportunities on the national territory. Massive storage based on compression and relaxation of air (CAES) requires high volume and confining pressure around the storage that exists

  18. The mechanical response of the porcine lens to a spinning test.

    Science.gov (United States)

    Reilly, Matthew A; Martius, Philipp; Kumar, Saurav; Burd, Harvey J; Stachs, Oliver

    2016-06-01

    The pig lens has been used as a model for presbyopia as pigs lack accommodative ability. Previous studies using microindentation have indicated that the shear modulus distribution is qualitatively similar to that of the aged human lens and that the lens does not alter its refractive power due to equatorial stretching. A lens spinning test was used to determine whether prior lens stiffness data obtained from a sectioned porcine lens were reliable and whether the testing conditions significantly influence the lens' mechanical properties. The elastic modulus distribution determined for fresh lenses closely matched that measured previously using a microindentation test. Confocal scanning laser microscopy was used to evaluate changes to the lens' structure arising from mechanical stress and following storage for up to one week.

  19. Fast neutron incineration in the energy amplifier as alternative to geologic storage the case of Spain

    CERN Document Server

    Rubbia, Carlo; Kadi, Y; Rubio, Juan Antonio

    1997-01-01

    In previous reports [1][2] we have presented the conceptual design of a fast neutron driven sub-critical device (Energy Amplifier) designed both for energy amplification (production) and for the incineration of unwanted ³waste² from Nuclear Light Water Reactors (LWR). The latter scheme is here applied to the specific case of Spain, where 9 large LWR¹s are presently in operation. It is shown that a cluster of 5 EA¹s is a very effective and realistic solution to the elimination (in 37 years) of the present and foreseen (till 2029) LWR-Waste stockpiles of Spain, but with major improvements over Geologic Storage, since: (1) only a Low Level Waste (LLW) surface repository of reasonable size is ultimately required; (2) the large amount of energy stored in the trans-Uranics is recovered, amounting for each of the 37 years of incineration to a saving of about 8% of the present primary energy demand of Spain (100 MTep/y); (3) the slightly enriched (1.1%) Uranium, unburned by LWR¹s, can be recovered for further us...

  20. Superlensing Microscope Objective Lens

    CERN Document Server

    Yan, Bing; Parker, Alan; Lai, Yukun; Thomas, John; Yue, Liyang; Monks, James

    2016-01-01

    Conventional microscope objective lenses are diffraction limited, which means that they cannot resolve features smaller than half the illumination wavelength. Under white light illumination, such resolution limit is about 250-300 nm for an ordinary microscope. In this paper, we demonstrate a new superlensing objective lens which has a resolution of about 100 nm, offering at least two times resolution improvement over conventional objectives in resolution. This is achieved by integrating a conventional microscope objective lens with a superlensing microsphere lens using a 3D printed lens adaptor. The new objective lens was used for label-free super-resolution imaging of 100 nm-sized engineering and biological samples, including a Blu-ray disc sample, semiconductor chip and adenoviruses. Our work creates a solid base for developing a commercially-viable superlens prototype, which has potential to transform the field of optical microscopy and imaging.

  1. Making the case for direct hydrogen storage in fuel cell vehicles

    Energy Technology Data Exchange (ETDEWEB)

    James, B.D.; Thomas, C.E.; Baum, G.N.; Lomas, F.D. Jr.; Kuhn, I.F. Jr. [Directed Technologies, Inc., Arlington, VA (United States)

    1997-12-31

    Three obstacles to the introduction of direct hydrogen fuel cell vehicles are often states: (1) inadequate onboard hydrogen storage leading to limited vehicle range; (2) lack of an hydrogen infrastructure, and (3) cost of the entire fuel cell system. This paper will address the first point with analysis of the problem/proposed solutions for the remaining two obstacles addressed in other papers. Results of a recent study conducted by Directed Technologies Inc. will be briefly presented. The study, as part of Ford Motor Company/DOE PEM Fuel Cell Program, examines multiple pure hydrogen onboard storage systems on the basis of weight, volume, cost, and complexity. Compressed gas, liquid, carbon adsorption, and metal hydride storage are all examined with compressed hydrogen storage at 5,000 psia being judged the lowest-risk, highest benefit, near-term option. These results are combined with recent fuel cell vehicle drive cycle simulations to estimate the onboard hydrogen storage requirement for full vehicle range (380 miles on the combined Federal driving schedule). The results indicate that a PNGV-like vehicle using powertrain weights and performance realistically available by the 2004 PNGV target data can achieve approximate fuel economy equivalent to 100 mpg on gasoline (100 mpg{sub eq}) and requires storage of approximately 3.6 kg hydrogen for full vehicle storage quantity allows 5,000 psia onboard storage without altering the vehicle exterior lines or appreciably encroaching on the passenger or trunk compartments.

  2. Primary frequency regulation with Li-ion battery energy storage system: A case study for Denmark

    DEFF Research Database (Denmark)

    Swierczynski, Maciej Jozef; Stroe, Daniel Ioan; Stan, Ana-Irina

    2013-01-01

    and improving the predictability of the intermittent renewables but also of providing the ancillary services in the future energy markets. However, this is currently difficult to achieve due to high prices of the energy storage systems and difficulties with accurate prediction of the energy storage systems......Meeting ambitious goals of transition to distributed and environmentally-friendly renewable energy generation can be difficult to achieve without energy storage systems due to technical and economical challenges. Moreover, energy storage systems have a high potential of not only smoothing...... on the results obtained from accelerated lifetime testing. The developed Li­-ion battery lifetime model is later a base for the analyses of the economic profitability of the investment in the Li-ion battery energy storage system (BESS), which delivers the primary frequency regulation service on the Danish...

  3. Re-evaluating Science and Technology trough the lens of Arts and Graphic Design. A case study in La Spezia.

    Science.gov (United States)

    Locritani, Marina; Stroobant, Mascha; Talamoni, Roberta; Merlino, Silvia; Guccinelli, Giacomo; Benvenuti, Lucrezia; Zatta, Consuelo; Stricker, Federica; Zappa, Franco; Sgherri, Matteo

    2016-04-01

    and imprinted in the minds of the public thanks to the support of speed painting and visual scribing, which made it more understandable, interesting and direct. 2. Edutainment activities. Two games have been build up for children aged between 7 and 13 years as a part of the European Researchers' Night activities (2011 and 2014-2015): a great board game with questions and drawings related to marine ecology and environmental protection and a memory game through which children can learn notions on Earthquakes, Volcanoes and Environment. Children's learning is facilitated if bound by game, and in this case images are more direct than words. 3. Surveys. A graphic questionnaire has been created in order to understand science perception and/or stereotypes in children who do not yet know how to read and write. In all these cases the relationship between researchers and artists has been extremely constructive and fruitful: researchers had to simplify their object of study in order to be able to disclose concepts that have been then translated into a simple and easy language.

  4. Clinical Presentation and Microbial Analyses of Contact Lens Keratitis; an Epidemiologic Study

    Directory of Open Access Journals (Sweden)

    Seyed Ahmad Rasoulinejad

    2014-09-01

    Full Text Available Introduction: Microbial keratitis is an infective process of the cornea with a potentially and serious visual impairments. Contact lenses are a major cause of microbial keratitis in the developed countries especially among young people. Therefore, the purpose of the present study was to evaluate the frequency and microbiological characteristic of CLK in patients referred to the emergency department (ED of teaching hospitals, Babol, Iran. Methods: This is a cross-sectional study of all patients with contact lens induced corneal ulcers admitted to the teaching hospitals of Babol, Iran, from 2011- 2013. An ophthalmologist examined patients with the slit-lamp and clinical features of them were noted (including pain, redness, foreign body sensation, chemosis, epiphora, blurred vision, discomfort, photophobia, discharge, ocular redness and swelling. All suspected infectious corneal ulcers were scraped for microbial culture and two slides were prepared. Data were analyzed using SPSS software, version 18.0. Results: A total of 14 patients (17 eyes were recruited into the study (100% female. The patients’ age ranged from 16-37 years old (mean age 21.58±7.23 years. The most prevalent observed clinical signs were pain and redness. Three samples reported as sterile. The most common isolated causative organism was pseudomonas aeroginosa (78.6%, Staphylococcus aureus 14.3%, and enterobacter 7.1%, respectively. Treatment outcome was excellent in 23.5%, good in 47.1%, and poor in 29.4% of cases. Conclusion: Improper lens wear and care as well as the lack of awareness about the importance of aftercare visits have been identified as potential risk factors for the corneal ulcer among contact lens wearers. Training and increasing the awareness of adequate lens care and disinfection practices, consulting with an ophthalmologist, and frequent replacement of contact lens storage cases would greatly help reducing the risk of microbial keratitis.

  5. Visual Outcomes, Quality of Vision, and Quality of Life of Diffractive Multifocal Intraocular Lens Implantation after Myopic Laser In Situ Keratomileusis: A Prospective, Observational Case Series

    Science.gov (United States)

    2017-01-01

    Purpose. To report visual performance and quality of life after implantation of a bifocal diffractive multifocal intraocular lens (MIOL) in postmyopic laser in situ keratomileusis (LASIK) patients. Methods. Prospective, observational case series. Patients with prior myopic LASIK who had implantation of Tecnis ZMA00/ZMB00 MIOL (Abbott Medical Optics) at Hong Kong Sanatorium and Hospital were included. Postoperative examinations included monocular and binocular distance, intermediate and near visual acuity (VA), and contrast sensitivity; visual symptoms (0–5); satisfaction (1–5); spectacle independence rate; and quality of life. Results. Twenty-three patients (27 eyes) were included. No intraoperative complications developed. Mean monocular uncorrected VA at distance, intermediate, and near were 0.13 ± 0.15 (standard deviation), 0.22 ± 0.15, and 0.16 ± 0.15, respectively. Corresponding mean values for binocular uncorrected VA were 0.00 ± 0.10, 0.08 ± 0.13, and 0.13 ± 0.10, respectively. No eyes lost >1 line of corrected distance VA. Contrast sensitivity at different spatial frequencies between operated and unoperated eyes did not differ significantly (all P > 0.05). Mean score for halos, night glare, starbursts, and satisfaction were 1.46 ± 1.62, 1.85 ± 1.69, 0.78 ± 1.31, and 3.50 ± 1.02, respectively. Eighteen patients (78%) reported complete spectacle independence. Mean composite score of the quality-of-life questionnaire was 90.31 ± 8.50 out of 100. Conclusions. Implantation of the MIOL after myopic LASIK was safe and achieved good visual performance.

  6. Inadvertent implantation of a reversed-optic Tecnis ZM900 multifocal intraocular lens: case report Implante invertido da lente intraocular Tecnis ZM900 multifocal: relato de caso

    Directory of Open Access Journals (Sweden)

    Wilson Takashi Hida

    2012-12-01

    Full Text Available A 51-year-old woman with age-related cataract had an uneventful phacoemulsification and a Tecnis ZM900 multifocal intraocular lens (IOL implantation in both eyes. During IOL implantation in the left eye, the optic was unintentionally reversed in the bag and left that way. The refraction surprise was not significant and six months postoperatively the corrected distance visual acuity in both eyes was 20/20 and neither complained of visual discomfort. In conclusion, we found that a reversed-optic Tecnis multifocal IOL in the present case resulted in good final visual acuity without significant differences in aberrations compared to the other eye, and a conservative management can be taken as a safe option.Paciente de 51 anos, sexo feminino, apresentando catarata foi submetida a cirurgia de facoemulsificação com implante de lente intraocular (LIO multifocal Tecnis ZM900 em ambos os olhos (AO. Durante a implantação da LIO no olho esquerdo, a lente foi inadvertidamente implantada invertida e deixada dessa maneira. Seis meses pós-operatório a surpresa refracional não se mostrou significativa e a acuidade visual corrigida era de 20/20 em AO, sem nenhuma queixa de desconforto visual. Em conclusão, no presente caso, o implante de uma LIO Tecnis multifocal invertida resultou em boa acuidade visual final e sem diferenças significativas na aberrometria em comparação ao olho contralateral, tendo sido possível conduzir o caso de maneira conservadora.

  7. Lens rigidity with trapped geodesics in two dimensions

    CERN Document Server

    Croke, Christopher B

    2011-01-01

    We consider the scattering and lens rigidity of compact surfaces with boundary that have a trapped geodesic. In particular we show that the flat cylinder and the flat M\\"obius strip are determined by their lens data. We also see by example that the flat M\\"obius strip is not determined by it's scattering data. We then consider the case of negatively curved cylinders with convex boundary and show that they are lens rigid.

  8. Glutathione Preservation during Storage of Rat Lenses in Optisol-GS and Castor Oil

    DEFF Research Database (Denmark)

    Holm, Thomas; Brøgger-Jensen, Martin Rocho; Johnson, Leif

    2013-01-01

    Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels...

  9. Habitat and Biodiversity of On-Farm Water Storages: A Case Study in Southeast Queensland, Australia

    Science.gov (United States)

    Markwell, Kim A.; Fellows, Christine S.

    2008-02-01

    On-farm water storages (locally known as farm dams or farm ponds) are an important part of many agricultural landscapes, as they provide a reliable source of water for irrigation and stock. Although these waterbodies are artificially constructed and morphologically simple, there is increasing interest in their potential role as habitat for native flora and fauna. In this article, we present results from a case study which examined the habitat characteristics (such as water physical and chemical parameters, benthic metabolism, and macrophyte cover) and the macrophyte and macroinvertebrate biodiversity of eight farm ponds on four properties in the Stanley Catchment, Southeast Queensland, Australia. Each landowner was interviewed to allow a comparison of the management of the ponds with measured habitat and biodiversity characteristics, and to understand landowners’ motivations in making farm pond management decisions. The physical and chemical water characteristics of the study ponds were comparable to the limited number of Australian farm ponds described in published literature. Littoral zones supported forty-five macroinvertebrate families, with most belonging to the orders Hemiptera, Coleoptera, Odonata, and Diptera. Invertebrate community composition was strongly influenced by littoral zone macrophyte structure, with significant differences between ponds with high macrophyte cover compared to those with bare littoral zones. The importance of littoral zone macrophytes was also suggested by a significant positive relationship between invertebrate taxonomic richness and macrophyte cover. The landowners in this study demonstrated sound ecological knowledge of their farm ponds, but many had not previously acknowledged them as having high habitat value for native flora and fauna. If managed for aquatic organisms as well as reliable water sources, these artificial habitats may help to maintain regional biodiversity, particularly given the large number of farm ponds

  10. Unitary lens semiconductor device

    Science.gov (United States)

    Lear, Kevin L.

    1997-01-01

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  11. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.A.; Foreman, L.R.

    1997-07-08

    This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

  12. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, Mike A. (Albuquerque, NM); Foreman, Larry R. (Los Alamos, NM)

    1997-01-01

    This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

  13. Location Optimization for Biomass Trigeneration System with Pit Thermal Energy Storage: the Case of the City of Petrinja

    DEFF Research Database (Denmark)

    Ćosić, B.; Dominkovic, Dominik Franjo; Ban, M.

    2015-01-01

    The combined production of electricity, heat and cold in biomass trigeneration power plants integrated with seasonal pit thermal energy storage ensures maximum utilization of biomass resources and at the same time reduction of variable operation costs of the system. Beside optimal size...... of trigeneration system, location allocation problem is additional factor which need to be taken into account. In this study, optimization of the location of biomass trigeneration power plant was considered. The system combined biomass cogeneration power plant, absorbers and the seasonal pit thermal energy storage......, four case studies were done for the city of Petrinja for which economic assessment of choosing optimal and non-optimal location was performed. Case studies have shown that significant amount of yearly spending on fuel can be avoided, if the optimal location has been chosen for the power plant location...

  14. Primary frequency regulation with Li-ion battery energy storage system: A case study for Denmark

    DEFF Research Database (Denmark)

    Swierczynski, Maciej Jozef; Stroe, Daniel Ioan; Stan, Ana-Irina;

    2013-01-01

    and improving the predictability of the intermittent renewables but also of providing the ancillary services in the future energy markets. However, this is currently difficult to achieve due to high prices of the energy storage systems and difficulties with accurate prediction of the energy storage systems...... electricity market. Moreover, in this paper a possible improvement of the Li-ion BESS energy management strategy is shown, which allows for obtaining the higher NPV....

  15. Carbon dioxide capture and storage: a win-win option? (the economic case)

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, G. [Future Energy Solutions, Didcot (United Kingdom)

    2003-07-01

    The UK currently derived 90% of its primary energy and generates over 70% of its electricity from fossil fuels. Moreover, it has access to substantial carbon dioxide storage capacity. In particular there is potential for storage combined with Enhance Oil Recovery (EOR) in the oil fields of the central and northern North Sea areas, while the gas fields of the southern North Sea offer a large near shore resource for storage. In the longer term saline aquifers offer an even large storage capacity. Consequently carbon dioxide capture and storage needs to be assessed as an important potential option for greenhouse gas abatement for the UK. This scoping study has examined the implementation, operation, economics and barriers to undertaking carbon dioxide capture and storage in the UK. It has concentrated on carbon dioxide capture from fossil fuel power stations; large 'point sources' of the gas that would need to be tackled in order to deliver significant levels of greenhouse gas abatement. Options for gas capture considered are retrofitting equipment to existing coal and natural gas fired plant as well as the construction of new coal (IGCC) and gas (GTCC) technology. Economic assessments have been made with 'present day' costs, and do not consider future improvements through technical innovation and; learning by doing', the potential of which is considerable for the mature carbon capture technologies.

  16. Out-of-the-bag intraocular lens dislocation: outcomes of posterior chamber intraocular lens exchange, risk factors, and prevention

    Institute of Scientific and Technical Information of China (English)

    ZHENG Dan-ying; CHEN Li-na; SUN Yi; SHAO Ying-feng; LIANG Jing-li; LIU Yi-zhi

    2010-01-01

    Background Dislocation of posterior chamber intraocular lens is one of the most common complications of intraocular lens implantation. Lens exchange is an effective solution to this unsatisfactory status. This study was conducted to analyze the possible predisposing factors for out-of-the-bag posterior chamber intraocular lens dislocation and to study the outcomes of lens exchange surgery.Methods Thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation who underwent posterior chamber intraocular lens exchange in Zhongshan Ophthalmic Center of Sun Yat-sen University (Guangdong,China) from January 2003 to October 2009 were included. A 6-month follow-up was completed. The causes for out-of-the-bag intraocular lens dislocation and visual outcomes of posterior chamber intraocular lens exchange were analyzed. The out-of-the-bag intraocular lens dislocation was diagnosed on the basis of the findings from slit-lamp microscope and B-ultrasound. The dislocated intraocular lens was explanted. Reimplantation of a new posterior chamber intraocular lens was performed in each case using standardized surgical procedures.Results In this study, a total of thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation underwent posterior chamber intraocular lens exchange surgery. Causes for out-of-the-bag intraocular lens dislocation included posterior capsule rupture during the initial cataract extraction procedure (23 eyes, 63.8%), trauma (5 eyes,13.9%), neodymium-doped yttrium aluminium garnet (Nd:YAG) laser-induced dislocation (2 eyes, 5.6%), the status after vitrectomy (2 eyes, 5.6%) and unidentifiable etiology (4 eyes, 11.1%). Symptoms of these patients mainly included decrease in visual acuity (17 cases, 47.2%), blurred vision (16 cases, 44.4%), glare (1 case, 2.8%), diplopia (1 case,2.8%), and halo (1 case, 2.8%). Intraocular lens dislocation into the posterior vitreous cavity (29 eyes, 80.5%), anterior chamber (1

  17. Seeing lens imaging as a superposition of multiple views

    CERN Document Server

    Grusche, Sascha

    2015-01-01

    In the conventional approach to lens imaging, rays are used to map object points to image points. However, many students have a need to think of the image as a whole. To answer this need, lens imaging is reinterpreted as a superposition of sharp images from different viewpoints. These so-called elemental images are uncovered by covering the lens with a pinhole array. Rays are introduced to connect elemental images. Lens ray diagrams are constructed based on bundles of elemental images. The conventional construction method is included as a special case. The proposed approach proceeds from concrete images to abstract rays.

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent Oct ... easy answer, and neither one considers long-term impacts. Phakic Intraocular Lenses for Nearsightedness FEB 27, 2017 ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lenses without a prescription in the United States. All contact lenses are medical devices that require a ... no such thing as a "one size fits all" contact lens. Lenses that are not properly fitted ...

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at ... ask for a prescription. There is no such thing as a "one size fits all" contact lens. ...

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals ...

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... 2016 More Eye Health News Studies Look at Effects of Marijuana on Vision FEB 28, 2017 By ...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ...

  5. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... Worse? May 16, 2016 More Eye Health News New Dry Eye Treatment is a Tear-Jerker JUL ...

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... glow-in-the-dark lizard lenses, costume contacts can certainly add a spooky, eye-popping touch. But ... consideration as a standard contact lens because they can be purchased over-the-counter or on the ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Healthy Contact Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 ... Number: * Email: * Enter code: * Message: Thank you Your feedback has been sent.

  9. Optimizing a Hybrid Energy Storage System for a Virtual Power Plant for Improved Wind Power Generation: A Case Study for Denmark

    DEFF Research Database (Denmark)

    Braun, Philipp; Swierczynski, Maciej Jozef; Diosi, Robert

    2011-01-01

    This paper describes one approach to find two optimum energy storages (ESs) to build a hybrid system which is part of a virtual power plant. Here it means the combination of the hybrid energy storage system and wind power plant (WPP). The discussed approach is applied in a case study on the power...

  10. Numerical simulation of CO2 geological storage in saline aquifers - case study of Utsira formation

    Directory of Open Access Journals (Sweden)

    Zheming Zhang, Ramesh K. Agarwal

    2014-01-01

    Full Text Available CO2 geological storage (CGS is one of the most promising technologies to address the issue of excessive anthropogenic CO2 emissions in the atmosphere due to fossil fuel combustion for electricity generation. In order to fully exploit the storage potential, numerical simulations can help in determining injection strategies before the deployment of full scale sequestration in saline aquifers. This paper presents the numerical simulations of CO2 geological storage in Utsira saline formation where the sequestration is currently underway. The effects of various hydrogeological and numerical factors on the CO2 distribution in the topmost hydrogeological layer of Utsira are discussed. The existence of multiple pathways for upward mobility of CO2 into the topmost layer of Utsira as well as the performance of the top seal are also investigated.

  11. Numerical simulation of CO2 geological storage in saline aquifers – case study of Utsira formation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zheming; Agarwal, Ramesh K. [Department of Mechanical Engineering and Materials Science, Washington University, St. Louis, MO 63130 (United States)

    2013-07-01

    CO2 geological storage (CGS) is one of the most promising technologies to address the issue of excessive anthropogenic CO2 emissions in the atmosphere due to fossil fuel combustion for electricity generation. In order to fully exploit the storage potential, numerical simulations can help in determining injection strategies before the deployment of full scale sequestration in saline aquifers. This paper presents the numerical simulations of CO2 geological storage in Utsira saline formation where the sequestration is currently underway. The effects of various hydrogeological and numerical factors on the CO2 distribution in the topmost hydrogeological layer of Utsira are discussed. The existence of multiple pathways for upward mobility of CO2 into the topmost layer of Utsira as well as the performance of the top seal are also investigated.

  12. Renewable rural electrification: Prediction of sustainability in South Africa. Case study: Wind and solar photo-voltaic with lead acid battery storage

    CSIR Research Space (South Africa)

    Rogers, DEC

    2009-01-01

    Full Text Available A case study methodology and assessment of renewable energy technology and sustainable development is applied to a DME rural village project. Wind, solar and lead acid battery energy storage technologies were used for off-grid electrification...

  13. Forbearance, Regulation, and Market Power in Natural Gas Storage: The Case of Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.; Ware, R.; Wetston, H.

    2007-07-01

    In late 2006 the Ontario Energy Board rendered a landmark decision to forbear from the price regulation of natural gas storage services. This paper examines the key issues and provides some economic analysis of the evidence. The decision followed a proceeding during which evidence was given on whether the market for storage is competitive or is subject to significant market power possessed by dominant and incumbent utility firms in the province. Intervenors in the proceeding were in broad agreement on the use of standard concepts from North American antitrust analysis of merger reviews: identification of the relevant product and geographic markets, analysis of market structure within the relevant market, and assessment of barriers to entry. A critical issue at the hearing was the extent of the geographic market; a broad market encompassing U.S. storage facilities in neighbouring states supports a finding of competition, whereas a narrower geographic market restricted to Ontario makes market power more likely. Since gas storage is only as functional as the pipelines connected to it, evidence was directed at assessing the availability of pipeline capacity in both primary and secondary markets. (auth)

  14. Modeling and Control of Heat Networks with Storage : the Single-Producer Multiple-Consumer Case

    NARCIS (Netherlands)

    Scholten, Tjeert Wobko; De Persis, Claudio; Tesi, Pietro

    2015-01-01

    In heat networks, energy storage is a viable approach to balance demand and supply. In such a network, a heat carrier is used in the form of water, where heat is injected and extracted through heat exchangers. The network can transport and store heated water in stratification tanks to shift loads in

  15. An overview of hydrogen storage materials: Making a case for metal organic frameworks

    CSIR Research Space (South Africa)

    Langmi, Henrietta W

    2013-04-01

    Full Text Available One of the major challenges facing the transition to a Hydrogen Economy is the development of a suitable storage medium for hydrogen. Conventionally, hydrogen is stored as compressed gas or cryogenically as a liquid. In order to meet future targets...

  16. Modeling and Control of Heat Networks with Storage : the Single-Producer Multiple-Consumer Case

    NARCIS (Netherlands)

    Scholten, Tjeert; De Persis, Claudio; Tesi, Pietro

    2016-01-01

    In heat networks, energy storage in the form of hot water in a tank is a viable approach to balancing supply and demand. In order to store a desired amount of energy, both the volume and temperature of the water in the tank need to converge to desired setpoints. To this end we provide a provably cor

  17. Modeling and Control of Heat Networks With Storage : The Single-Producer Multiple-Consumer Case

    NARCIS (Netherlands)

    Scholten, Tjardo; De Persis, Claudio; Tesi, Pietro

    2016-01-01

    In heat networks, energy storage in the form of hot water in a tank is a viable approach to balancing supply and demand. In order to store a desired amount of energy, both the volume and temperature of the water in the tank need to converge to desired setpoints. To this end, we provide a provably co

  18. Minus Piggyback Lens Overlaying ReSTOR® Multifocal Lens in High Myopia

    Directory of Open Access Journals (Sweden)

    Isha Gupta

    2013-06-01

    Full Text Available Background: We report the case of a 40-year-old female patient treated with implantation of the Acrysof® IQ ReSTOR® lens (Alcon, Fort Worth, Tex., USA with overlaying Acrysof EXpand® minus piggyback lens (Alcon. Methods: The patient had high myopia and was diagnosed with presbyopia and bilateral posterior subcapsular cataract. She desired to be spectacle-free and opted to undergo bilateral placement of the ReSTOR multifocal lens. The necessary intraocular lens (IOL power was +3.5 in the right eye and +4.0 in the left eye, though the range of commercially available ReSTOR lenses is +6.0 to +34.0 D. In order to achieve emmetropia in this case of high myopia, it was determined that an EXpand minus piggyback lens would be necessary. Results: Implantation of the ReSTOR lens with overlaying EXpand minus piggyback lens was performed successfully and without complication. At 5 months postoperatively, the patient had 20/20 uncorrected visual acuity in both eyes. She reported a high level of satisfaction and was able to return to her daily activities including reading and driving without spectacles. Conclusion: We report successful primary implantation of AcrySof EXpand minus piggyback lenses overlying the AcrySof IQ ReSTOR lens in a patient with high myopia. Long-term follow-up and further evaluation is necessary to establish piggyback IOL implantation with multifocal IOL as an accepted treatment for high myopia with presbyopia.

  19. The mass profile of early-type galaxies in overdense environments: the case of the double source plane gravitational lens SL2SJ02176-0513

    CERN Document Server

    TU, H; Limousin, M; Cabanac, R; Marshall, P J; Fort, B; Treu, T; Péllo, R; Jullo, E; Kneib, J -P; Sygnet, J -F

    2009-01-01

    SL2SJ02176-0513 is a remarkable lens for the presence of two multiply-imaged systems at different redshifts lensed by a foreground massive galaxy at $z_{\\rm lens}=0.656$: a bright cusp arc at $z_{\\rm arc}=1.847$ and an additional double-image system at an estimated redshift of $z_{\\rm dbl}\\sim2.9$ based on photometry and lensing geometry. The system is located about 400 kpc away from the center of a massive group of galaxies. Mass estimates for the group are available from X-ray observations and satellite kinematics. Multicolor photometry provides an estimate of the stellar mass of the main lens galaxy. The lensing galaxy is modeled with two components (stars and dark matter), and we include the perturbing effect of the group environment, and all available constraints. We find that classic lensing degeneracies, e.g. between external convergence and mass density slope, are significantly reduced with respect to standard systems and infer tight constraints on the mass density profile: (i) the dark matter content...

  20. A retrospective study of nine cases of Acanthamoeba keratitis

    Directory of Open Access Journals (Sweden)

    Tetsuya Mutoh

    2010-10-01

    Full Text Available Tetsuya Mutoh, Isao Ishikawa, Yukihiro Matsumoto, Makoto ChikudaDokkyo Medical University Koshigaya Hospital, Saitama, JapanPurpose: To evaluate the clinical features of Acanthamoeba keratitis in nine patients diagnosed at Dokkyo Medical University Koshigaya Hospital, Saitama, Japan.Methods: In nine eyes of nine patients, Acanthamoeba keratitis was diagnosed by direct light microscopy of corneal scrapings stained by the Parker ink-potassium hydroxide method between September 2006 and September 2009. Their clinical features and course were studied retrospectively. Antifungal eye drops, systemic antifungal therapy, and surgical debridement of the corneal lesions were performed in all patients.Results: At presentation, the clinical stage was initial in six cases, transient in one case, and complete in two cases. The patients were all contact lens wearers who had washed their lens storage cases with tap water. After treatment, final visual acuity was improved in six cases, unchanged in one case, and worse in two cases. The patient with the worst final vision (hand motion had rheumatoid arthritis and was taking oral prednisolone, which led to corneal perforation and prevented adequate debridement from being done.Conclusion: Acanthamoeba keratitis is closely related to wearing contact lenses and washing the lens storage case with tap water. Although final visual acuity improved after treatment in most patients, insufficient surgical debridement resulted in a poor visual prognosis.Keywords: surgical debridement, Acanthamoeba keratitis, contact lens wearers

  1. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    Directory of Open Access Journals (Sweden)

    Elena Bonafonte Marquez

    2015-01-01

    Full Text Available We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for it could be the only sign of secondary glaucoma.

  2. Ternary Amides Containing Transition Metals for Hydrogen Storage: A Case Study with Alkali Metal Amidozincates.

    Science.gov (United States)

    Cao, Hujun; Richter, Theresia M M; Pistidda, Claudio; Chaudhary, Anna-Lisa; Santoru, Antonio; Gizer, Gökhan; Niewa, Rainer; Chen, Ping; Klassen, Thomas; Dornheim, Martin

    2015-11-01

    The alkali metal amidozincates Li4 [Zn(NH2)4](NH2)2 and K2[Zn(NH2)4] were, to the best of our knowledge, studied for the first time as hydrogen storage media. Compared with the LiNH2-2 LiH system, both Li4 [Zn(NH2)4](NH2)2-12 LiH and K2[Zn(NH2)4]-8 LiH systems showed improved rehydrogenation performance, especially K2[Zn(NH2)4]-8 LiH, which can be fully hydrogenated within 30 s at approximately 230 °C. The absorption properties are stable upon cycling. This work shows that ternary amides containing transition metals have great potential as hydrogen storage materials.

  3. Design, construction and management of tailings storage facilities for surface disposal in China: case studies of failures.

    Science.gov (United States)

    Wei, Zuoan; Yin, Guangzhi; Wang, J G; Wan, Ling; Li, Guangzhi

    2013-01-01

    Rapid development of China's economy demands for more mineral resources. At the same time, a vast quantity of mine tailings, as the waste byproduct of mining and mineral processing, is being produced in huge proportions. Tailings impoundments play an important role in the practical surface disposal of these large quantities of mining waste. Historically, tailings were relatively small in quantity and had no commercial value, thus little attention was paid to their disposal. The tailings were preferably discharged near the mines and few tailings storage facilities were constructed in mainland China. This situation has significantly changed since 2000, because the Chinese economy is growing rapidly and Chinese regulations and legislation require that tailings disposal systems must be ready before the mining operation begins. Consequently, data up to 2008 shows that more than 12 000 tailings storage facilities have been built in China. This paper reviews the history of tailings disposal in China, discusses three cases of tailings dam failures and explores failure mechanisms, and the procedures commonly used in China for planning, design, construction and management of tailings impoundments. This paper also discusses the current situation, shortcomings and key weaknesses, as well as future development trends for tailings storage facilities in China.

  4. Coal fired unit CO{sub 2} capture and storage feasibility study: an Italian case

    Energy Technology Data Exchange (ETDEWEB)

    Dodero, G.; Girardi, G.

    2008-07-01

    The paper discusses what criteria must be adopted by electric utilities in selecting the CO{sub 2} capture process, before covering post combustion capture, integrated gasification combined cycle plants (IGCC), oxy-fuel combustion, advanced carbon capture technologies, CO{sub 2} treatment, purification and compression, transportation of recovered CO{sub 2} to disposal sites, and CO{sub 2} storage. 15 refs., 2 figs., 1 tab.

  5. Adult onset glycogen storage disease type II (adult onset Pompe disease): report and magnetic resonance images of two cases

    Energy Technology Data Exchange (ETDEWEB)

    Del Gaizo, Andrew [Emory University School of Medicine, Radiology Resident, Atlanta, GA (United States); Banerjee, Sima [Emory University School of Medicine, Musculoskeletal Radiology Department, Atlanta, GA (United States); Terk, Michael [Emory University School of Medicine, Radiology, Division of Musculoskeletal Imaging, Atlanta, GA (United States)

    2009-12-15

    Glycogen storage disease type II (GSDII), also referred to as Pompe disease or acid maltase deficiency, is a rare inherited condition caused by a deficiency in acid alpha-glucosidase (GAA) enzyme activity. The condition is often classified by age of presentation, with infantile and late onset variants (Laforet et al. J Neurology 55:1122-8, 2000). Late onset tends to present with progressive proximal muscle weakness and respiratory insufficiency (Winkel et al. J Neurology 252:875-84, 2005). We report two cases of biopsy confirmed adult onset GSDII, along with key Magnetic Resonance (MR) images. (orig.)

  6. CO2 capture and storage in Greece: A case study from komotini ngcc power plant

    Directory of Open Access Journals (Sweden)

    Koukouzas Nikolaos

    2006-01-01

    Full Text Available The aim of this paper is to examine the possibilities for the abatement of CO2 emissions in the Greek fossil fuel power generation sector. An overview of CO2 capture, transportation, and storage concepts, on which the R&D community is focused, is presented. The implementation of post-combustion CO2 capture options in an existing fossil fuel power plant is then examined and the consequences on the overall plant performance are determined. Finally, the possibilities of transportation and then underground storage of the pure CO2 stream are analyzed taking into account both technical and economical factors. The results of this analysis show that CO2 sequestration is technically feasible for existing fossil fuel fired power plants in Greece. However, substantial reduction in plant efficiency is observed due to increased energy demand of the technologies used as well as in electricity production cost due to capital and operation costs of capture, transport, and storage of CO2. .

  7. Intraocular Lens Calcification; a Clinicopathologic Report

    Directory of Open Access Journals (Sweden)

    Mozhgan Rezaei-Kanavi

    2009-04-01

    Full Text Available

    PURPOSE: To describe the clinical and pathological features of a case of hydrogel intraocular lens (IOL calcification. CASE REPORT: A 48-year-old man underwent explantation of a single-piece hydrophilic acrylic intraocular lens in his left eye because of decreased visual acuity and milky white opalescence of the IOL. The opacified lens was exchanged uneventfully with a hydrophobic acrylic IOL. Gross examination of the explanted IOL disclosed opacification of the optic and haptics. Full-thickness sections of the lens optic were stained with hematoxylin and eosin (H&E, von Kossa and Gram Tworts'. Microscopic examination of the sections revealed fine and diffuse basophilic granular deposits of variable size within the lens optic parallel to the lens curvature but separated from the surface by a moderately clear zone. The deposits were of high calcium content as evident by dark brown staining with von Kossa. Gram Tworts' staining disclosed no microorganisms. CONCLUSION: This report further contributes to the existing literature on hydrogel IOL calcification.

  8. Clinical analysis of 46 cases of ocular trauma underwent secondary suspended intraocular lens implantation%眼外伤后行二期悬吊人工晶状体植入46例临床分析

    Institute of Scientific and Technical Information of China (English)

    蔡莉莉

    2015-01-01

    Objective To investigate the methods and results of ocular trauma underwent seeondary suspended intraocular lens implantation.Methods Forty-six cases of ocular trauma after surgical treatment showed aphakia.After they were implemented the secondary suspended intraocular lens implantation,their visual acuity before and after surgery,intraocular pressure changes and the incidence of complications were recorded and statistically analyzed after conclusion.Results After 46 cases of ocular trauma patients was conducted the secondary suspended intraocular lens implantation surgery,their visual acuity all significantly improved than before the treatment (P < 0.05),whereas no significant change in terms of intraocular pressure(P > 0.05).The complication incidence was 21.74% (10/46),of which the highest was ocular hypertension (8.70%).Conclusions Secondary suspended intraocular lens implantation after ocular trauma can significantly improve visual acuity,improve patient outcomes and prognosis,protect their quality of life.%目的 探讨眼外伤后行二期悬吊人工晶状体植入的方法及效果.方法 46例眼外伤患者经一期手术治疗后均呈现无晶状体眼,实施二期悬吊人工晶状体植入手术治疗,记录其手术前后视力、眼压变化情况及并发症发生率,进行统计学分析.结果 46例眼外伤患者经二期悬吊人工晶状体植入手术治疗后,其视力均较治疗前显著改善(P<0.05),而眼压则较治疗前无明显变化(P>0.05),相关并发症发生率为21.74%(10/46),其中高眼压发生率最高(8.70%).结论 眼外伤后给予二期悬吊人工晶状体植入手术治疗可显著改善患者视力,提高患者疗效及预后,保障其生活质量.

  9. Carbon Storage Potential of Forest Land: A Comparative Study of Cases in Finland and Croatia

    Directory of Open Access Journals (Sweden)

    Martina Tijardović

    2013-06-01

    Full Text Available Background and Purpose: The concentrations of greenhouse gases in the atmosphere have been increasing over the last hundred years in relation to the Fourth IPCC assessment report that highlighted human activities as a direct influence on climate changes. Since Croatia and Finland signed the Kyoto Protocol, they are both committed to fulfil international obligations of lowering GHG’s emissions, enhancing the storage, as well as protecting and enhancing the current pools where the forestry sector has a prominent role. These obligations created a need for a review on carbon storage potentials for both countries with the aim of setting further scientific and management guidelines as the basic purpose of this research. Materials and Methods: Data collection was conducted within the scope of the Sort Term Scientific Mission (STSM in the period from May 2 – July 22, 2009 in the Finnish Forest Research Institute in Joensuu. The research encompassed an overview of literature, personal contacts with scientists and experts from both countries (research institutes, ministries, the EFI branch office in Joensuu and a field inspection which altogether provided an insight into the applied silvicultural and utilization activities. A significant data source were official documents and published project results on the carbon storage potential. Results and Discussion: Mitigation activities within the framework of the LULUCF project reduced the total emissions for 33.4 millions tons of CO2 equivalents in Finland in 2006 (this data has varied from 18 to 33.4 millions tons CO2 equivalents in the last fifteen years while for Croatia the availability of such data is limited. Finland has some former agricultural land which may be afforested but not in the substantial share, while in Croatia such areas amount to around 1 million ha. According to the climate change scenario for Finland (FINADAPT, predicting the largest climate changes, the total forest growth

  10. Cataract Surgery for Tilted Lens in Peters' Anomaly Type 2

    Directory of Open Access Journals (Sweden)

    Tadayuki Nishide

    2013-09-01

    Full Text Available Background: Cases of cataract surgery without penetrating keratoplasty in patients with Peters' anomaly are very rare. We report a case of Peters' anomaly type 2 with tilted lens due to synechia between the lens and iris that was treated with cataract surgery without penetrating keratoplasty. Case Presentation: A 16-year-old girl had Peters' anomaly in both eyes. Corneal opacity was severe in the left eye due to high-grade dysgenesis of the anterior segment. In the right eye, corneal opacity had spread from the center of the cornea to the inferotemporal side, and there was synechia between the iris and corneal endothelium from the inferonasal side to the inferotemporal side. Opacity was observed in the anterior pole of the lens, and there was synechia between the anterior iris and the lens. Ultrasound biomicroscopy (UBM revealed that the lens was tilted because of synechia. The tilted lens induced astigmatism, which reduced visual acuity to 20/250, in conjunction with a cataract. Cataract surgery was performed; the synechia between the lens capsule and the iris was severed, an intraocular lens was inserted, and the tilt was repaired. UBM was used postoperatively to confirm that the lens capsule synechia had been corrected and that the intraocular lens was not tilted. As a result, visual acuity improved to 20/100; glaucoma and expansion of corneal opacity were not observed. Conclusions: Severing of the synechia between the cataract and iris, during cataract surgery, in a patient with Peters' anomaly type 2 resulted in favorable postoperative visual acuity.

  11. Paediatric intraocular lens implants: accuracy of lens power calculations.

    Science.gov (United States)

    O'Gallagher, M K; Lagan, M A; Mulholland, C P; Parker, M; McGinnity, G; McLoone, E M

    2016-09-01

    PurposeThis study aims to evaluate the accuracy of lens prediction formulae on a paediatric population.MethodsA retrospective case-note review was undertaken of patients under 8 years old who underwent cataract surgery with primary lens implantation in a regional referral centre for paediatric ophthalmology, excluding those whose procedure was secondary to trauma. Biometric and refractive data were analysed for 43 eyes, including prediction errors (PE). Statistical measures used included mean absolute error (MAE), median absolute error (MedAE), Student's t-test and Lin's correlation coefficient.ResultsThe mean PE using the SRK-II formula was +0.96 D (range -2.47D to +2.41 D, SD 1.33 D, MAE 1.38 D, MedAE 1.55, n=15). The mean PE was smaller using SRK/T (-0.18 D, range -3.25 D to +3.95 D, SD 1.70 D, MAE 1.30 D, MedAE 1.24, n=27). We performed an analysis of the biometry data using four different formula (Hoffer Q, Holladay 1, SRK-II and SRK/T). Hoffer Q showed a smaller MedAE than other formulae but also a myopic bias.ConclusionOur clinical data suggest SRK/T was more accurate in predicting post-operative refraction in this cohort of paediatric patients undergoing cataract surgery. Hoffer Q may have improved accuracy further.

  12. Pollen storages in nests of bees of the genera Partamona, Scaura and Trigona (Hymenoptera, Apidae Pólen estocado nos ninhos de abelhas dos gêneros Partamona, Scaura e Trigona (Hymenoptera, Apidae

    Directory of Open Access Journals (Sweden)

    André Rodrigo Rech

    2011-09-01

    Full Text Available Bees and angiosperms established a mutualistic relationship along the evolutionary time. The aim of this study is to contribute for the understanding of this relation analyzing pollen stored by stingless bees colonies distributed along the Rio Negro. Fourteen species of Meliponini from the genera Partamona, Scaura, and Trigona were studied with regard to the content of pollen pots. The pollen material was removed from the pollen pots, homogenized, and prepared according to the usual acetolysis technique. The overlap of the trophic niche and the grouping of species by similarity of niches was calculated. The identification revealed 78 pollen types belonging to 36 families, being 37 types attractive and 16 considered as promoters of a temporary specialization event. With the results, it was possible to indicate a list of important plants for meliponiculture in the Amazon.Abelhas e plantas estabeleceram ao longo do tempo evolutivo uma relação mutualística. Buscando contribuir para o entendimento dessa relação, foi analisado o pólen estocado por colônias de abelhas-sem-ferrão distribuídas ao longo do rio Negro. Foram estudados potes de pólen de 14 espécies de Meliponini dos gêneros Partamona, Scaura e Trigona. O material polínico foi retirado dos potes de pólen, homogeneizado e preparado segundo técnica usual de acetólise. Foram calculados a sobreposição de nicho trófico e o agrupamento das espécies pela similaridade de nichos. Foi identificado o total de 78 tipos polínicos, pertencentes a 36 famílias, sendo 37 destes, considerados atrativos, enquanto 16 foram promotores de eventos de especialização temporária. Com os resultados obtidos foi possível indicar uma lista de plantas de importância para a meliponicultura na Amazônia.

  13. 小切口白内障摘除联合人工晶体植入术52例临床分析%Clinical analysis of 52 cases of small incision cataract extraction combined with intraocular lens implantation

    Institute of Scientific and Technical Information of China (English)

    阿西木

    2014-01-01

    目的:对小切口白内障摘除联合人工晶体植入术的临床疗效进行分析。方法选取我院52例白内障患者为例,所有患者均实施小切口白内障摘除联合人工晶体植入术进行治疗,观察和分析患者的手术治疗效果。结果患者术后显示视力水平有所改善,并发症患者经过处理均全部治愈。结论采用小切口白内障摘除联合人工晶体植入术对白内障患者进行治疗,创伤性小,治疗效果显著,安全性高,值得推广和普及。%Objective The clinical efficacy of small incision cataract extraction and intraocular lens implantation for analysis. Methods 52 cases of cataract patients in our hospital, for example, all patients were implementing small incision cataract extraction and intraocular lens implantation for treatment, observation and analysis of surgical treatment of patients. Results Postoperative patients showed improvement in visual acuity and complications in patients treated were cured. Conclusion the use of small incision cataract extraction and intraocular lens implantation for cataract treatment, traumatic small, significant treatment effect, safe, worthy of promotion and popularization.

  14. Effects of drinking water in Acanthamoeba contamination of contact lens and contact lens storage cases%饮用水对角膜接触镜保存盒棘阿米巴污染的影响

    Institute of Scientific and Technical Information of China (English)

    王月华; 崔春权; 郑善子

    2006-01-01

    [目的]观察饮用水的棘阿米巴污染情况,研究其与角膜接触镜保存盒棘阿米巴污染的关系[方法]对延吉市居民饮用水棘阿米巴污染情况及大学生角膜接触镜保存盒和保存液的棘阿米巴污染情况进行调查.将103份饮用水和93份角膜接触镜保存液及保存盒擦拭液接种于有灭活大肠杆菌的无营养琼脂培养基中在28℃条件下培养1周,观察棘阿米巴生长情况.[结果]93份角膜接触镜保存盒擦拭液及保存液中有1份(1%)检出棘阿米巴污染,103份饮用水中有41份(40%)检出棘阿米巴污染[结论]角膜接触镜保存液和保存盒棘阿米巴污染可能与不正确地使用饮用水清洗和保存角膜接触镜有关.

  15. Diabetes mellitus-associated glycogen storage hepatomegaly: report of a case and review of the Japanese literature.

    Science.gov (United States)

    Nakamuta, M; Ohashi, M; Goto, K; Tanabe, Y; Hiroshige, K; Nawata, H

    1993-07-01

    A huge hepatomegaly was seen in a 30-yr-old female diabetic who was treated with high dose of insulin for her uncontrollable food ingestion. The liver function at the peak of the hepatic enlargement showed a moderate increase of transaminases, alkaline phosphatase, and gamma-glutamyl transpeptidase. The histology of the enlarged liver revealed PAS-positive granules in enlarged hepatocytes, indicating the presence of massive glycogen storage. On admission, she was maintained under a calorie-restricted diet and received approximately 15 to 20 units per day of insulin supplement. At one month after admission, a marked shrinkage of her enlarged liver and restoration of normal liver function were observed concomitantly with the return of fair control of her blood sugar levels. One year later, she had an episode of diabetic ketoacidosis which subsequently was treated with a continuous low-dose infusion of insulin; however, she showed neither hepatomegaly nor liver dysfunction during this episode. There have been 20 cases reported of Japanese diabetics with marked hepatomegaly, in whom the vigorous treatment of diabetic ketoacidosis with insulin seemed to be a trigger of the enlarged liver. This has occurred mostly in patients with insulin-dependent diabetes mellitus. We present a case of non-insulin-dependent diabetes mellitus with glycogen storage hepatomegaly, presumably due to excessive insulin supplements. This suggests that glycogen storage hepatomegaly in diabetics may not be only due to an acute restoration from diabetic ketoacidosis, but may also be due to an overinsulinization in an attempt to maintain a euglycemic condition in spite of excess food intake.

  16. Thin Lens Ray Tracing.

    Science.gov (United States)

    Gatland, Ian R.

    2002-01-01

    Proposes a ray tracing approach to thin lens analysis based on a vector form of Snell's law for paraxial rays as an alternative to the usual approach in introductory physics courses. The ray tracing approach accommodates skew rays and thus provides a complete analysis. (Author/KHR)

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 More Eye ... EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health observances EyeSmart resources are also ...

  18. Thermal energy storage for sustainable energy consumption : fundamentals, case studies and design

    CERN Document Server

    Paksoy, Halime

    2007-01-01

    We all share a small planet. Our growing thirst for energy already threatens the future of our earth. Fossil fuels - energy resources of today - are not evenly distributed on the earth. 10 per cent of the world's population exploits 90 per cent of its resources. Today's energy systems rely heavily on fossil fuel resources which are diminishing ever faster. The world must prepare for a future without fossil fuels. Thermal energy storage provides us with a flexible heating and/or cooling tool to combat climate change through conserving energy and increasing energy while utilizing natural renewab

  19. Late opacification of a hydrophilic acrylic intraocular lens

    Directory of Open Access Journals (Sweden)

    Al-Bdour Muawyah

    2008-01-01

    Full Text Available Cataract extraction and intraocular lens implantation is considered to be a safe procedure in most cases. However, the new advances in the surgical technique namely phacoemulsification and hence the increased use of foldable intraocular lenses have given rise to new complications including late opacification of intraocular lenses. In this case we report late opacification of a foldable hydrophilic acrylic intraocular lens and the surgical technique for its exchange.

  20. Fabricating customized hydrogel contact lens

    Science.gov (United States)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  1. Case Studies of Energy Storage with Fuel Cells and Batteries for Stationary and Mobile Applications

    Directory of Open Access Journals (Sweden)

    Nadia Belmonte

    2017-03-01

    Full Text Available In this paper, hydrogen coupled with fuel cells and lithium-ion batteries are considered as alternative energy storage methods. Their application on a stationary system (i.e., energy storage for a family house and a mobile system (i.e., an unmanned aerial vehicle will be investigated. The stationary systems, designed for off-grid applications, were sized for photovoltaic energy production in the area of Turin, Italy, to provide daily energy of 10.25 kWh. The mobile systems, to be used for high crane inspection, were sized to have a flying range of 120 min, one being equipped with a Li-ion battery and the other with a proton-exchange membrane fuel cell. The systems were compared from an economical point of view and a life cycle assessment was performed to identify the main contributors to the environmental impact. From a commercial point of view, the fuel cell and the electrolyzer, being niche products, result in being more expensive with respect to the Li-ion batteries. On the other hand, the life cycle assessment (LCA results show the lower burdens of both technologies.

  2. [High cost drugs for rare diseases in Brazil: the case of lysosomal storage disorders].

    Science.gov (United States)

    de Souza, Mônica Vinhas; Krug, Bárbara Corrêa; Picon, Paulo Dornelles; Schwartz, Ida Vanessa Doederlein

    2010-11-01

    This paper approaches in a critical way aspects of Brazilian public policies for drugs, emphasizing those classified as high cost and for rare diseases. The lysosomal storage diseases was taken as an example because of their rarity and the international trend for the development of new drugs for their treatment, all at high costs. Three lysosomal storage diseases were approached: Gaucher disease, Fabry disease and mucopolysaccharidosis type I. Gaucher disease has its treatment drug licensed in Brazil and guidelines for its use are established through a clinical protocol by the Ministry of Health. The others have their drug treatments registered in Brazil; however, no treatment guidelines for them have been developed by the government. The objective of the paper was to foster the discussion on the role of health technology assessment for high-cost drugs for rare diseases in Brazil, emphasizing the need for establishing health policies with legitimacy towards these diseases. Despite the difficulties in establishing a health policy for each rare disease, it is possible to create rational models to deal with this growing challenge.

  3. Case Study in Corporate Memory Recovery: Hanford Tank Farms Miscellaneous Underground Waste Storage Tanks - 15344

    Energy Technology Data Exchange (ETDEWEB)

    Washenfelder, D. J.; Johnson, J. M.; Turknett, J. C.; Barnes, T. J.; Duncan, K. G.

    2015-01-07

    In addition to managing the 177 underground waste storage tanks containing 212,000 m3 (56 million gal) of radioactive waste at the U. S. Department of Energy’s Hanford Site 200 Area Tank Farms, Washington River Protection Solutions LLC is responsible for managing numerous small catch tanks and special surveillance facilities. These are collectively known as “MUSTs” - Miscellaneous Underground Storage Tanks. The MUSTs typically collected drainage and flushes during waste transfer system piping changes; special surveillance facilities supported Tank Farm processes including post-World War II uranium recovery and later fission product recovery from tank wastes. Most were removed from service following deactivation of the single-shell tank system in 1980 and stabilized by pumping the remaining liquids from them. The MUSTs were isolated by blanking connecting transfer lines and adding weatherproofing to prevent rainwater entry. Over the next 30 years MUST operating records were dispersed into large electronic databases or transferred to the National Archives Regional Center in Seattle, Washington. During 2014 an effort to reacquire the historical bases for the MUSTs’ published waste volumes was undertaken. Corporate Memory Recovery from a variety of record sources allowed waste volumes to be initially determined for 21 MUSTs, and waste volumes to be adjusted for 37 others. Precursors and symptoms of Corporate Memory Loss were identified in the context of MUST records recovery.

  4. The analysis of optical wave beams propagation in lens systems

    Science.gov (United States)

    Kazakov, I.; Mosentsov, S.; Moskaletz, O.

    2016-08-01

    In this paper some aspects of the formation and propagation of optical wave beams in lens systems were considered. As an example, the two-lens optical information processing system was considered. Analysis of the two-lens optical circuit has been made with a systems approach perspective. As part of the radio-optical analogies had been applied certain provisions of the theory of dynamical systems to the spatial optical system. The lens system is represented as a simple series-connected optical elements with known spatial impulse response. General impulse response of such a system has been received, as well as consider some special cases of the impulse response. The question of the relationship between the parameters and the size of the input aperture lenses for undistorted transmission of the optical signal has been considered. Analysis of the energy loss resulting from the finite aperture of the lens. It's based on an assessment of the fraction of radiation that propagates beyond the lens. Analysis showed that the energy losses depend explicitly on the following parameters: radiation wavelength, distance between input aperture and lens, and ratio of the input aperture and lens aperture. With the computer help simulation the dependence of losses was shown on the above parameters

  5. A case study of electrostatic accidents in the process of oil-gas storage and transportation

    Science.gov (United States)

    Hu, Yuqin; Wang, Diansheng; Liu, Jinyu; Gao, Jianshen

    2013-03-01

    Ninety nine electrostatic accidents were reviewed, based on information collected from published literature. All the accidents over the last 30 years occurred during the process of oil-gas storage and transportation. Statistical analysis of these accidents was performed based on the type of complex conditions where accidents occurred, type of tanks and contents, and type of accidents. It is shown that about 85% of the accidents occurred in tank farms, gas stations or petroleum refineries, and 96% of the accidents included fire or explosion. The fishbone diagram was used to summarize the effects and the causes of the effects. The results show that three major reasons were responsible for accidents, including improper operation during loading and unloading oil, poor grounding and static electricity on human bodies, which accounted for 29%, 24% and 13% of the accidents, respectively. Safety actions are suggested to help operating engineers to handle similar situations in the future.

  6. Characterization of bedded salt for storage caverns -- A case study from the Midland Basin, Texas

    Energy Technology Data Exchange (ETDEWEB)

    Hovorka, Susan D.; Nava, Robin

    2000-06-13

    The geometry of Permian bedding salt in the Midland Basin is a product of interaction between depositional facies and postdepositional modification by salt dissolution. Mapping high-frequency cycle patterns in cross section and map view using wireline logs documents the salt geometry. Geologically based interpretation of depositional and dissolution processes provides a powerful tool for mapping and geometry of salt to assess the suitability of sites for development of solution-mined storage caverns. In addition, this process-based description of salt geometry complements existing data about the evolution of one of the best-known sedimentary basins in the world, and can serve as a genetic model to assist in interpreting other salts.

  7. Failure Analysis of Overhanging Blocks in the Walls of a Gas Storage Salt Cavern: A Case Study

    Science.gov (United States)

    Wang, Tongtao; Yang, Chunhe; Li, Jianjun; Li, Jinlong; Shi, Xilin; Ma, Hongling

    2017-01-01

    Most of the rock salt of China is bedded, in which non-salt layers and rock salt layers alternate. Due to the poor solubility of the non-salt layers, many blocks overhang on the walls of the caverns used for gas storage, constructed by water leaching. These overhanging blocks may collapse at any time, which may damage the tubing and casing string, and even cause instability of the cavern. They are one of the main factors threatening the safety of caverns excavated in bedded rock salt formations. In this paper, a geomechanical model of the JJKK-D salt cavern, located in Jintan salt district, Jintan city, Jiangsu province, China, is established to evaluate the stability of the overhanging blocks on its walls. The characters of the target formation, property parameters of the rock mass, and actual working conditions are considered in the geomechanical model. An index system composed of stress, displacement, plastic zone, safety factor, and equivalent strain is used to predict the collapse length of the overhanging blocks, the moment the collapse will take place, and the main factors causing the collapse. The sonar survey data of the JJKK-D salt cavern are used to verify the reliability and accuracy of the proposed geomechanical model. The results show that the proposed geomechanical model has a good reliability and accuracy, and can be used for the collapse prediction of the overhanging blocks on the wall of the JJKK-D salt cavern. The collapse length of the overhanging block is about 8 m. We conclude that the collapse takes place during the debrining. The reason behind the collapse is the sudden decrease of the fluid density, leading to the increase of the self-weight of the overhanging blocks. This study provides a basis for the collapse prediction method of the overhanging blocks of Jintan salt cavern gas storage, and can also serve as a reference for salt cavern gas storage with similar conditions to deal with overhanging blocks.

  8. Energy Storage.

    Science.gov (United States)

    Eaton, William W.

    Described are technological considerations affecting storage of energy, particularly electrical energy. The background and present status of energy storage by batteries, water storage, compressed air storage, flywheels, magnetic storage, hydrogen storage, and thermal storage are discussed followed by a review of development trends. Included are…

  9. Implantation of a Multifocal Toric Intraocular Lens after Radial Keratotomy and Cross-Linking with Hyperopia and Astigmatism Residues: A Case Report

    Directory of Open Access Journals (Sweden)

    Raffaele Nuzzi

    2017-08-01

    Full Text Available Radial keratotomy is a refractive surgical technique, widely used in the 80s and early 90s to correct myopia and astigmatism, but now overcome by more recent laser techniques. Important consequences, often in patients with more than 45 years of age, are progressive hyperopic shift and/or an increase in corneal astigmatism, whose main cause seems to be an increase in the curvature radius of the central portion of the cornea. This seems to be due to radial keratotomy incisions – with the consequent need for cross-linking – intraocular pressure, and corneal biomechanical parameters. The authors propose phacoemulsification with a customized multifocal toric intraocular lens implantation to correct the induced shift and hyperopic astigmatism. A decent postoperative visual acuity was observed with good patient satisfaction. A specific protocol must be applied to optimize the correct diagnosis, presurgical evaluation and postsurgical outcomes that are to be maintained over time, without regressions.

  10. Numerical implementation of generalized Coddington equations for ophthalmic lens design

    Science.gov (United States)

    Rojo, P.; Royo, S.; Ramírez, J.; Madariaga, I.

    2014-02-01

    A method for general implementation in any software platform of the generalized Coddington equations is presented, developed, and validated within a Matlab environment. The ophthalmic lens design strategy is presented thoroughly, and the basic concepts of generalized ray tracing are introduced. The methodology for ray tracing is shown to include two inter-related processes. Firstly, finite ray tracing is used to provide the main direction of propagation of the considered ray at the incidence point of interest. Afterwards, generalized ray tracing provides the principal curvatures of the local wavefront at that point, and its orientation after being refracted by the lens. The curvature values of the local wavefront are interpreted as the sagital and tangential powers of the lens at the point of interest. The proposed approach is validated using a double-check of the calculated lens performance in the spherical lens case: while finite ray tracing is validated using a commercial ray tracing software, generalized ray tracing is validated using a software application for ophthalmic lens design based on the classical version of Coddington equations. Equations of the complete tracing process are developed in detail for the case of generic astigmatic ophthalmic lenses as an example. Three-dimensional representation of the sagital and tangential powers of the ophthalmic lens at all directions of gaze then becomes possible, and results are presented for lenses with different geometries.

  11. Development of a universal toric intraocular lens calculator

    Science.gov (United States)

    Hjelmstad, David; Sayegh, Samir I.

    2014-02-01

    We present a method for calculating the ideal toric lens to implant in astigmatic patients following cataract surgery. We show that the online calculators provided by major toric IOL manufacturers are insufficient for both theoretical and practical reasons. We reveal important theoretical shortcomings in their approach, illustrated by a number of cases which demonstrate how the approach can lead to errors in lens selection. Our approach combines the spherical and cylindrical power calculations into one, and allows for lens data from any manufacturer to be used, eliminating the reliance on multiple programs.

  12. Diesel oil safety stock in storage and distribution terminals: a case study: Porto Velho/Rio, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, Rubens C. [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil); D' agosto, Marcio A. [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil)

    2012-07-01

    This paper presents a methodology for calculating diesel oil safety stock in distributor terminals located in the northern of Brazil, applied on a case study for terminals in the state of Rondonia. From the mapping of logistic flows related to transport and storage of diesel oil, the risk factors that cause uncertainties in lead time were analyzed and quantified. Through a research conducted among economic agents (producers, distributors and carriers) operating in the region, it was measured the relevance and impact of risk factors on the safety stock in the terminals. The safety stock was calculated by the classical equation of inventories, as well as by the methodology proposed in this paper. The difference between the two methods has unveiled inefficiencies derived from uncertainties in lead time. Recommendations of actions to mitigate the risk factors are included at the end of this paper. (author)

  13. Decentralized Monitoring and Control of Electric Power Distribution System with a use case of Community Energy Storage System

    Science.gov (United States)

    Huq, Kazi Mohammad Moyeenull

    This work focuses on the platform and framework required for developing decentralized monitoring and control applications for a distribution system. Decentralized control of Community Energy Storage (CES) devices has been considered as a use case. The first chapter gives an overview of energy management system and applications. Then the development of centralized and decentralized CES control applications are discussed. The next chapters discusses the software architecture of a typical centralized SCADAEMS platform and outlines the architecture required for a decentralized platform. Then, suitability of IEC 61850 standard for decentralized monitoring and control is investigated and an approach to developing decentralized applications in IEC 61850 enabled environment is proposed and demonstrated. Finally, CIM standard is reviewed for exchanging power system topology information for distributed control.

  14. Posterior chamber implantable contact lens for 18 cases of high myopia%有晶状体眼后房型可植入式接触镜矫正高度近视患者18例

    Institute of Scientific and Technical Information of China (English)

    张淑萍; 叶子隆; 刘旭姣; 高岩; 史彩霞; 谢淑丽; 高海音

    2009-01-01

    Objective To investigate the efficacy and safety of posterior chamber implantable contact lens (ICL) implantation to correct high myopia in phakic eyes. Methods Under topical anesthesia 18 cases (32 eyes) of high myopia were treated with posterior chamber intraocular lens implantation. Comparisons between post-operative uncorrected visual acuity and pre-operative best corrected visual acuity, between post-operative refraction and pre-operative refraction, and between post-operative intraocular pressure and pre-operative pressure were carried out. ICL's location and complications such as cataract and secondary glaucoma were observed. Results Post-operative uncorrected visual acuity reached or exceeded the preoperative best corrected visual acuity in 18 cases (32 eyes). Except that 2 cases (2 eyes) had a transient high intraocular pressure 2 hours after the operation and 1 case had a high intraocular pressure 10 days after the operation, others were controlled normally. UBM showed that there was a certain gap between ICL and the lens. During the follow-up period, visual acuity, refraction, and intraocular pressure were stable. No complicated cataract, secondary glaucoma, retinal detachment or chronic meningitis, such as uvitis happened. Conclusion ICL posterior chamber intraocular lens implantation in eyes is safe and reliable.%目的 探讨有晶状体眼后房型可植入式接触镜(ICL)植入术矫正高度近视的有效性及安全性.方法 表面麻醉下对18例(32眼)高度近视患者行有晶状体眼后房型ICL植入术,将术后裸眼视力与术前最佳矫正视力对比.术后屈光度、眼压与术前屈光度、眼压进行对比.观察ICL在眼内的位置及有无并发性白内障、继发性青光眼等并发症的发生.结果 18例(32眼)术后裸眼视力均达到或超过术前最佳矫正视力,除两例(2眼)术后2 h出现一过性高眼压,1例(1眼)术后10d出现眼压升高,经局部降眼压对症治疗及停用激素眼药治疗

  15. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Willson, Reg G.; Goetz, Walter

    2012-09-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ˜5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ˜2.1 cm to infinity. At the minimum working distance, image pixel scale is ˜14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI's resolution is comparable at ˜30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  16. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Wilson, Reg G.; Goetz, Walter

    2012-01-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ?5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ?2.1 cm to infinity. At the minimum working distance, image pixel scale is ?14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI?s resolution is comparable at ?30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  17. Impact of Electric Vehicles as Distributed Energy Storage in Isolated Systems: The Case of Tenerife

    Directory of Open Access Journals (Sweden)

    Alfredo Ramírez Díaz

    2015-11-01

    Full Text Available Isolated regions are highly dependent on fossil fuels. The use of endogenous sources and the improvement in energy efficiency in all of the consumption activities are the two main ways to reduce the dependence of petroleum-derived fuels. Tenerife offers an excellent renewable resource (hours of sun and wind. However, the massive development of these technologies could cause important operational problems within the electric power grids, because of the small size of the system. In this paper, we explore the option of coupling an electric vehicle fleet as a distributed energy storage system to increase the participation of renewables in an isolated power system, i.e., Tenerife Island. A model simulator has been used to evaluate five key outputs, that is the renewable share, the energy spilled, the CO2 emissions, the levelized cost of generating electricity and fuel dependence, under alternative scenarios. Comparing to the current situation, combining a gradual renewable installed capacity and the introduction of an electric vehicle fleet using alternative charging strategies, a total of 30 different scenarios have been evaluated. Results shows that the impact of 50,000 electric vehicles would increase the renewable share in the electricity mix of the island up to 30%, reduce CO2 emissions by 27%, the total cost of electric generation by 6% and the oil internal market by 16%.

  18. Scleral suspension pars-plana lensectomy for ectopia lentis followed by suture fixation of intraocular lens

    Directory of Open Access Journals (Sweden)

    Mitra Sandip

    2001-01-01

    Full Text Available Purpose: To describe a simple technique of scleral suspension-pars plana lensectomy (SS-PPL in acquired and congenital ectopia lentis and scleral fixation of intraocular lens (IOL. Materials and Methods: Twenty eyes of 16 patients (12 unilateral and 4 bilateral cases of "essential familial lens subluxation" aged 10-40 years (mean 25 years underwent SS-PPL with implantation of scleral fixated IOL. Indications for surgery were best-corrected visual acuity <6/18, bisection of pupil by the lens, and lens-induced glaucoma. Prerequisites for SS-PPL were, visibility of part of the lens in the pupillary area and soft lens. Results: Postoperative visual acuity ranged from 6/6 - 6/36. Lens tilt in 3 cases(15% and small decentration in 2 cases(10% were seen; however these did not seriously compromise the visual result. Scant vitreous bleeding on the first postoperative day was seen in 3 cases (15%. Conclusion: The advantages of the scleral suspension of subluxated lens prior to lensectomy include stabilization; it allows proper viewing of the lens, avoids injury to the iris and cliary body during lensectomy and reduces the possibility of dislocation of the lens.

  19. Bilateral cataract formation via acute spontaneous fracture of the lens following treatment of hyperglycemic hyperosmolar syndrome

    Directory of Open Access Journals (Sweden)

    Yevgeniy V. Sychev

    2017-09-01

    Conclusions and importance: Acute transient cataracts that develop during correction of hyperglycemic hyperosmolar syndrome are thought to result from osmotic lens swelling. In this case report, internal fracture of the lens was produced by mechanical forces generated in the process of lens swelling occurring as a consequence of initial hyperglycemia and its subsequent correction. This case represents a rare ocular complication of hyperglycemia correction, and provides new evidence that mechanical forces can be part of diabetic cataractogenesis.

  20. A Lens Mapping Algorithm for Weak Lensing

    CERN Document Server

    Saini, T D; Saini, Tarun Deep; Raychaudhury, Somak

    2001-01-01

    We develop an algorithm for the reconstruction of the two-dimensional massdistribution of a cluster of galaxies from the observable distortion ofbackground galaxies. From the measured reduced shear gamma_i/(1-kappa) the lensmapping is directly obtained, from which a mass distribution is derived. Thisis unlike other methods where the convergence (kappa) is first obtained. Weshow that this method works best for sub-critical lenses but can be applied toa critical lens away from the critical lines. For finite fields the usualmass-sheet degeneracy is shown to exist in this method as well. We suggest aniterative scheme to remove the mass-sheet degeneracy for the case of asub-critical lens, in the absence of a substantial external shear. The sametechnique can be used with additional information for the case of a criticallens as well. A scheme to reduce the effects of noise is also suggested.

  1. LASER INDUCED THERMAL LENS EFFECT

    Institute of Scientific and Technical Information of China (English)

    沈俊; 黄孟才; 江景云; 施教芳

    1991-01-01

    The thermal lens effect has emerged in recent years as a novel ,highly sensitive tool for the study of the very weak molecular absorption of light energy,This paper discusses the theory and technique of the thermal lens measurement.Some opplications of the thermal lens measurement are described.A mode-mismatched dual-beam thermal lens experimental arragement with a modulated probe beam ,designed by the authors.for trace analysis is presented,and its detection limit was found to be 4.1×10-7 for Cu(Ⅱ) in ethanol and 80 mW excitation power.

  2. Fibrosis in the lens. Sprouty regulation of TGFβ-signaling prevents lens EMT leading to cataract.

    Science.gov (United States)

    Lovicu, F J; Shin, E H; McAvoy, J W

    2016-01-01

    Cataract is a common age-related condition that is caused by progressive clouding of the normally clear lens. Cataract can be effectively treated by surgery; however, like any surgery, there can be complications and the development of a secondary cataract, known as posterior capsule opacification (PCO), is the most common. PCO is caused by aberrant growth of lens epithelial cells that are left behind in the capsular bag after surgical removal of the fiber mass. An epithelial-to-mesenchymal transition (EMT) is central to fibrotic PCO and forms of fibrotic cataract, including anterior/posterior polar cataracts. Transforming growth factor β (TGFβ) has been shown to induce lens EMT and consequently research has focused on identifying ways of blocking its action. Intriguingly, recent studies in animal models have shown that EMT and cataract developed when a class of negative-feedback regulators, Sprouty (Spry)1 and Spry2, were conditionally deleted from the lens. Members of the Spry family act as general antagonists of the receptor tyrosine kinase (RTK)-mediated MAPK signaling pathway that is involved in many physiological and developmental processes. As the ERK/MAPK signaling pathway is a well established target of Spry proteins, and overexpression of Spry can block aberrant TGFβ-Smad signaling responsible for EMT and anterior subcapsular cataract, this indicates a role for the ERK/MAPK pathway in TGFβ-induced EMT. Given this and other supporting evidence, a case is made for focusing on RTK antagonists, such as Spry, for cataract prevention. In addition, and looking to the future, this review also looks at possibilities for supplanting EMT with normal fiber differentiation and thereby promoting lens regenerative processes after cataract surgery. Whilst it is now known that the epithelial to fiber differentiation process is driven by FGF, little is known about factors that coordinate the precise assembly of fibers into a functional lens. However, recent research

  3. State of the art on high-temperature thermal energy storage for power generation. Part 2. Case studies

    Energy Technology Data Exchange (ETDEWEB)

    Medrano, Marc; Gil, Antoni; Martorell, Ingrid; Potau, Xavi; Cabeza, Luisa F. [GREA Innovacio Concurrent, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida (Spain)

    2010-01-15

    Power generation systems are attracting a lot of interest from researchers and companies. Storage is becoming a component with high importance to ensure system reliability and economic profitability. A few experiences of storage components have taken place until the moment in solar power plants, most of them as research initiatives. In this paper, real experiences with active storage systems and passive storage systems are compiled, giving detailed information of advantages and disadvantages of each one. Also, a summary of different technologies and materials used in solar power plants with thermal storage systems existing in the world is presented. (author)

  4. Finite Element Analysis of the LOLA Receiver Telescope Lens

    Science.gov (United States)

    Matzinger, Elizabeth

    2007-01-01

    This paper presents the finite element stress and distortion analysis completed on the Receiver Telescope lens of the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. The Receiver Telescope captures the laser pulses transmitted through a diffractive optical element (DOE) and reflected off the lunar surface. The largest lens of the Receiver Telescope, Lens 1, is a 150 mm diameter aspheric lens originally designed to be made of BK7 glass. The finite element model of the Receiver Telescope Lens 1 is comprised of solid elements and constrained in a manner consistent with the behavior of the mounting configuration of the Receiver Telescope tube. Twenty-one temperature load cases were mapped to the nodes based on thermal analysis completed by LOLA's lead thermal analyst, and loads were applied to simulate the preload applied from the ring flexure. The thermal environment of the baseline design (uncoated BK7 lens with no baffle) produces large radial and axial gradients in the lens. These large gradients create internal stresses that may lead to part failure, as well as significant bending that degrades optical performance. The high stresses and large distortions shown in the analysis precipitated a design change from BK7 glass to sapphire.

  5. Achromobacter xylosoxidans keratitis after contact lens usage.

    Science.gov (United States)

    Park, Jung Hyun; Song, Nang Hee; Koh, Jae Woong

    2012-02-01

    To report on Achromobacter xylosoxidans keratitis in two healthy patients who had worn contact lenses foran extended period of time. A 36-year-old female and a 21-year-old female visited our hospital with ocular pain and blurred vision. Both patients had a history of wearing soft contact lenses for over fve years with occasional overnight wear. At the initial presentation, a slit lamp examination revealed corneal stromal infiltrations and epithelial defects with peripheral neovascularization in both patients. Microbiological examinations were performed from samples of corneal scrapings, contact lenses, contact lens cases, and solution. The culture resulting from the samples taken from the contact lenses, contact lens cases, and solution were all positive for Achromobacter xylosoxidans. Confrming that the direct cause of the keratitis was the contact lenses, the frst patient was prescribed ceftazidime and amikacin drops sensitive to Achromobacter xylosoxidans. The second patient was treated with 0.3% gatifoxacin and fortifed tobramycin drops. After treatment, the corneal epithelial defects were completely healed, and subepithelial corneal opacity was observed. Two cases of Achromobacter xylosoxidans keratitis were reported in healthy young females who wore soft contact lenses. Achromobacter xylosoxidans should be considered a rare but potentially harmful pathogen for lens-induced keratitis in healthy hosts.

  6. Pitfalls in aphakic contact lens fitting

    Directory of Open Access Journals (Sweden)

    Dada Vijay

    1990-01-01

    Full Text Available We examined 23 consecutive cases of unilateral aphakia reporting to the contact lens office for endothelial count and morphology, corneal thickness and toricity. The fellow eye served as a control in all the cases. It was found that there is a significant drop in the central endothelial cell density, and change in the size and shape of the cells. These observations indicate a thermodynamically unstable state. The aphakic corneas were thicker than the controls but not to a significant extent. The cell count and pachymetry had no statistical correlation. Toricity of the aphakic corneas make successful fitting of a lens difficult. Since prolonged use of extended wear gas permeable as well as hydrogel lenses have a deleterious effect on the endothelium it is suggested that a careful case selection be made and strict monitoting carried out at follow up. These corneas are liable for decompensation with only mild noxious stimuli. This article is intended to acquaint the ophthalmologist with the pitfalls in aphakic contact lens fitting so that a cautious follow up may be planned.

  7. Tophaceous gout in a female premenopausal patient with an unexpected diagnosis of glycogen storage disease type Ia: a case report and literature review.

    Science.gov (United States)

    Zhang, Bingqing; Zeng, Xuejun

    2016-11-01

    A young female with recurrent tophaceous gout and infertility presented to our clinic. On clinical evaluation, hypoglycaemia, hypertriglyceridaemia, lactic acidosis, and hepatomegaly were noted. Targeted gene sequencing revealed a novel composite heterozygous c.190G>T/c.508C>T mutation in the G6PC gene of the patient, leading to a diagnosis of glycogen storage disease type Ia. Her father possessed a heterozygous c.190G>T mutation, and her mother possessed a heterozygous c.508C>T mutation. A search of the previous literature revealed 16 reported cases of glycogen storage disease type Ia with gout. Here, we describe a female patient with gout, review previous cases, and discuss the mechanisms of gout and hyperuricaemia in glycogen storage disease type Ia.

  8. Intraocular Lens Power Estimation in Combined Phacoemulsification and Pars Plana Vitrectomy in Eyes with Epiretinal Membranes: A Case-Control Study

    Science.gov (United States)

    Kim, Min; Kim, Hyoung Eun; Lee, Dong Hyun; Koh, Hyoung Jun; Lee, Sung Chul

    2015-01-01

    Purpose To evaluate the accuracy of postoperative refractive outcomes of combined phacovitrectomy for epiretinal membrane (ERM) in comparison to cataract surgery alone. Materials and Methods Thirty-nine eyes that underwent combined phacovitrectomy with intraocular lens (IOL) implantation for cataract and ERM (combined surgery group) and 39 eyes that received phacoemulsification for cataract (control group) were analyzed, retrospectively. The predicted preoperative refractive aim was compared with the results of postoperative refraction. Results In the combined surgery group, refractive prediction error by A-scan and IOLMaster were -0.305±0.717 diopters (D) and -0.356±0.639 D, respectively, compared to 0.215±0.541 and 0.077±0.529 in the control group, showing significantly more myopic change compared to the control group (p=0.001 and p=0.002, respectively). Within each group, there was no statistically significant difference in refractive prediction error between A-scan and IOLMaster (all p>0.05). IOL power calculation using adjusted A-scan measurement of axial length based on the macular thickness of the normal contralateral eye still resulted in significant postoperative refractive error (all ppower estimation in eyes with cataract and ERM, sequential surgery for ERM and cataract may need to be considered. PMID:25837189

  9. Physics of electrostatic lens

    Science.gov (United States)

    1981-09-01

    The purpose of this program was to study the physics of the ion-energy boosting electrostatic lens for collective ion acceleration in the Luce diode. Extensive work was done in preparation for experiments on the PI Pulserad 1150. Analytic work was done on the orbit of protons in a mass spectrometer and a copper stack for nuclear activation analysis of proton energy spectrum has been designed. Unfortunately, a parallel program which would provide the Luce diode for the collective ion acceleration experiment never materialized. As a result no experiments were actually performed on the Pulserad 1150.

  10. An Energy-Based Control Strategy for Battery Energy Storage Systems: A Case Study on Microgrid Applications

    Directory of Open Access Journals (Sweden)

    Rui Hou

    2017-02-01

    Full Text Available Battery energy storage systems (BESSs with proportional-integral (PI control methods have been widely studied in microgrids (MGs. However, the performance of PI control methods might be unsatisfactory for BESSs due to the nonlinear characteristics of the system. To overcome this problem, an energy-based (EB control method is applied to control the converter of a BESS in this study. The EB method is a robust nonlinear control method based on passivity theory with good performance in both transient and steady states. The detailed design process of the EB method in the BESS by adopting an interconnection and damping assignment (IDA strategy is described. The design process comprises three steps: the construction of the port-controlled Hamiltonian model, the determination of the equilibrium point and the solution of the undetermined matrix. In addition, integral action is combined to eliminate the steady state error generated by the model mismatch. To establish the correctness and validity of the proposed method, we implement several case simulation studies based on a test MG system and compare the control performance of the EB and PI methods carefully. The case simulation results demonstrate that the EB method has better tracking and anti-disturbance performance compared with the classic PI method. Moreover, the proposed EB method shows stronger robustness to the uncertainty of system parameters.

  11. Contribution of terrigenous rocks of South Belgian coal deposits in geological storage of CO2 : the sandstones case

    Science.gov (United States)

    Dupont, N.; Baele, J.-M.

    2009-04-01

    Sequestration of CO2 in unmined coal seams is one of the different options for storing CO2 in geological reservoirs. In favorable situations, it could be coupled with the retrieving of adsorbed methane from coal (ECBM), which can make this solution economically more attractive. However, in the case of South Belgian coal measures, both weak permeability of the coal and frequent faulting/folding of the seams are likely to decrease the efficiency of this technique. Westphalian A and B sediments from South Belgium are containing only about 2.5% vol. of coal; the other rocks consisting of shales/siltstones (~80%) and sandstones (~20%). For all these lithologies, the main processes of CO2 sequestration are 1) adsorption in coal and clay minerals that are partly forming shales, and within rock porosity in the case of sandstones and, to a lesser extent, in the shales/siltstone porosity. In a previous assessment of the sequestration potential in Westphalian coal measures of South Belgium, Baele et al. (2007) showed that coal and shales each account for 25% of the total sequestration potential, and the rest, i.e. 50%, is related to sandstones on a basis of 2% porosity. Beside their significant additional storage capacity, sandstones have also a better permeability than the other finer-grained and organic lithologies. Additionally, sandstones are known to occasionally cut the coal seams (wash-out), thus providing insights in increasing accessibility of injected CO2 into the coal. On the other hand, some sandstone banks are fossil braided rivers that induced peripheral fractures by differential compaction during burial diagenesis (Van Tongeren et al., 2000). These fractures are thus likely to have increased accessibility from high-injectivity sandstones to surrounding lithologies that could significantly contribute to storage capacity. The aim of this study is to refine the contribution of the westphalian South Belgium sandstones to the geological storage of CO2. Measurements

  12. Panoramic lens applications revisited

    Science.gov (United States)

    Thibault, Simon

    2008-04-01

    During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

  13. Chediak Higashi Syndrome masquerading as acute leukemia / storage disorder - A rare case report

    Directory of Open Access Journals (Sweden)

    Mirza Asif Baig

    2015-07-01

    CHS is characterised by partial oculocutaneous albinism, frequent fatal bacterial infections, bleeding diathesis and peripheral + Cranial nerve palsies. This disorder further culminates into accelerated phase (Lymphoproliferative Syndrome progressing into pancytopenia. CHS is due to single gene mutation in LYST (CHS gene localized to 1q chromosome. The diagnostic hallmark of CHS is presence of giant purple to blue violet inclusions in leucocytes. In this study granules are more prominent in Bone marrow than in PBS correlating well with previous studies. Approximately 85% of the cases, of CHS culminates into Accelerated phase showing Lymphohistiocytic infiltration progressing to pancytopenia and death due to infection. The very rare nature of this disease and its grave prognosis merits its reporting. [Int J Res Med Sci 2015; 3(7.000: 1785-1787

  14. Microbial contamination of soft contact lenses & accessories in asymptomatic contact lens users

    Directory of Open Access Journals (Sweden)

    Deeksha V Thakur

    2014-01-01

    Full Text Available Background & objectives: With increasing use of soft contact lenses the incidence of contact lens induced infections is also increasing. This study was aimed to assess the knowledge of new and existing contact lens users about the risk of microbial contamination associated with improper use and maintenance of contact lenses, type of microbial flora involved and their potential to cause ophthalmic infections. Methods: Four samples each from 50 participants (n=200 were collected from the lenses, lens care solutions, lens care solution bottles and lens cases along with a questionnaire regarding their lens use. The samples were inoculated onto sheep blood agar, Mac Conkey′s agar and Sabouraud′s dextrose agar. Organisms were identified using standard laboratory protocols. Results: Overall rate of microbial contamination among the total samples was 52 per cent. The most and the least contaminated samples were found to be lens cases (62% and lens care solution (42%, respectively. The most frequently isolated contaminant was Staphylococcus aureus (21% followed by Pseudomonas species (19.5%. Majority (64% of the participants showed medium grade of compliance to lens cleaning practices. Rate of contamination was 100 and 93.75 per cent respectively in those participants who showed low and medium compliance to lens care practices as compared to those who had high level of compliance (43.75% ( p0 <0.05. Interpretation & conclusions: Lens care practices amongst the participants were not optimum which resulted into high level contamination. Hence, creating awareness among the users about the lens care practices and regular cleaning and replacements of lens cases are required.

  15. Application of Foldable Intraocular Lens in Multiple Types of Cataract

    Institute of Scientific and Technical Information of China (English)

    Songtao Yuan; Qinghuai Liu; Qing Jiang; Nanrong Yuan

    2002-01-01

    Objective: To evaluate the clinical results of implantation of foldable intraocular lens inmultiple types of cataract.Methods: This retrospective study comprised 162 eyes of 148 patients undergoingphacoemulsification and implantation of foldable intraocular lens, some of whom under-went combined pars plana vitrectomy or trabeculectomy or silicone oil removal. Theperiod of follow-up was from 3 months to 17 months.Results: There is slight reaction postoperatively in all cases. The postoperative uncorrectedvisual acuites was from 0. 05 to 1.2, patient with 0.6 or above acuity were 70.98%. Aneodymium: YAG capsulotomy was required in 5 eyes. Posterior capsule ruptured in 1eyes, and a PMMA intraocular lens was implanted in ciliary sulcus. In one eye, a lenswas removed because of recurrence of retina detachment.Conclusions: The application of foldable intraocular lens in multiple types of cataract issafe, and there is a slight postoperative reaction. less complications , and fast visualacuity recovery.

  16. Kalundborg case study, a feasibility study of CO{sub 2} storage in onshore saline aquifers. CO2STORE[Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Michael; Bech, N.; Bidstrup, T.; Christensen, Niels Peter; Vangkilde-Pedersen, T. [GEUS (Denmark); Biede, O. [ENERGI E2 (Denmark)

    2007-06-15

    The Danish case-study of the CO2STORE project comprises the potential future capture and underground storage of CO{sub 2} from two point sources. These are the coal fired power plant Asnaesvaerket and the Statoil refinery both located in the city of Kalundborg, Denmark. Initial mapping of the storage structure was conducted as part of the EU funded research project GESTCO that was concluded in 2003. The study identified a large underground structure forming a potential, future storage site 15 km to the northeast of the city. Porous sandstones filled with saline water at a depth of approximately 1.500 m form the reservoir. The structure covers approximately 160 km{sup 2} and a preliminary calculation suggests a storage capacity of nearly 900 million tonnes of CO2 equal to more than 150 years of CO{sub 2} emissions from the two point sources. In the Kalundborg case-study, a fictive capture and storage scenario will be formulated and modelled. The scenario is based on experiences learned through the SACS and GESTCO projects. Detailed geological modelling, reservoir simulation, reservoir and cap rock characterisation and risk assessment will be important issues for the case-study. The Geological Survey of Denmark and Greenland (GEUS) is project leader for the Kalundborg case-study. Information on CO{sub 2} emissions from the point sources and technical and economical input for the three scenarios is provided by the industrial partners; ENERGI E2 and Statoil ASA. The scenario is designed only for this case study and does not reflect the strategic plans of ENERGI E2 nor Statoil ASA. Geochemical simulation and modelling studies on reservoir and cap rock were performed at Bureau de Recherches Geologiques et Minieres (BRGM) in France. The CO2STORE project is performed within the European Community supported 5th Framework Programme. (au)

  17. CO{sub 2} storage possibilities in karstik regions: A case study from southwestern Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Sener, M.; Tufekci, K. [Nigde University, Nigde (Turkey). Dept. of Geology

    2008-07-01

    In Turkey, the three power plants (Yataan, Yenikoy, and Kemerkoy) in the southwestern part of Anatolia use Upper Miocene-Pliocene coal and cause environmental pollution in the winter. For this reason, some considerations have been given to the injection of CO{sub 2} from the power plants into the crust. A research project has been put into the practice for decreasing of global warming. Karstification and geological features, which are included in very thick carbonate rocks (a thickness over 2,000 m and limestone, dolomite, and marble from Paleozoic to Pliocene), and faults-lineaments have been considered as very important agents that will affect the injection of CO{sub 2}. The micro- and macro-karstification and lineament of the region have been studied, and the rocks of the area have been grouped into two classes based on the appropriateness of karstification as suitable and unsuitable rocks. Karstic and geological features (rocks and dislocation lines) have been compared together in a Geographic Information Systems (GIS); thus, by taking note of the geological-geomorphological characteristics of the area, a case study has been proposed for the CO{sub 2} injection from the Gokova power plant emissions with GIS applications, and suitable areas for the injection have been determined for further research.

  18. Replantation after extended dry storage of avulsed permanent incisors: report of a case.

    Science.gov (United States)

    Cobankara, Funda Kont; Ungor, Mete

    2007-08-01

    A 15-year-old boy lost his maxillary right and left central incisor teeth in a bicycle accident. He was referred to our clinic 1 week after the injury. The crown-root integrities of both the teeth were not damaged. Although the teeth were stored under dry conditions for 1 week, reimplantation of the teeth was planned to retain the teeth in the mouth for as long a period as possible because of the patient's age. Following the debridement and sterilization of root surfaces in 2.5% NaOCl, root canals were prepared and filled with calcium hydroxide. Then, about 2 mm of the apexes were resected to ensure that the roots easily seated in the alveolar socket and the prepared cavities in root ends were obturated with the amalgam. The teeth were placed into their respective sockets and splinted temporarily. The root canal therapy was completed 5 weeks later. Ankylosis was observed radiographically after 10 months. The patient is now 23 years old and he is still able to use both the central incisors functionally. However, there is a pink appearance on the cervical buccal surface of left central incisor because of progressive replacement resorption. In this case, the new treatment plan is to perform a permanent restoration with dental implants following the extraction of both teeth. Even though the long-term prognosis is uncertain, this treatment technique has provided an advantage for the patient in his adolescent period by maintaining the height of alveolar bone and making the provision of an aesthetically acceptable permanent restoration at a later age possible.

  19. [Lens luxation in dogs: a retrospective study of 134 dogs (2000-2011)].

    Science.gov (United States)

    Betschart; Hässig; Spiess

    2014-03-01

    This retrospective study evaluated cases of lens luxation in dogs that were documented at the University of Zurich Veterinary Teaching Hospital between 2000 and 2011. A total 134 dogs were included in the study. This population of dogs with lens luxation represents 0.41 % of all dogs presented to the Zurich Veterinary Teaching Hospital (32'523) and 3.02 % of all dogs presented to the ophthalmology service during the same time period. The 134 dogs represented over 40 different breeds, including mixed breeds. 63 of the dogs were male, 71 were female. The 134 dogs were divided in primary lens luxation (86 of the 134 dogs, 64 %) and secondary lens luxation (48 dogs, 36 %). The most frequent causes for secondary lens luxation were glaucoma (58 %), cataract (19 %) and trauma (17 %). This study shows the predisposition for primary lens luxations in terrier breeds, Chinese Crested dogs, Pinscher and Spitz. In contrast, Siberian Huskies, Basset Hounds, Bearded Collies, Cairn Terriers, mixed breed dogs, Bolonka Zwetna, Boston Terriers, Borzoi, Doberman, Eurasian, Leonberg, Luzerner Niederlaufhund and Weimaraner suffered significantly more often from secondary lens luxation. There was no sex predilection for primary or secondary lens luxation. Dogs with primary lens luxation were on average 7.39 ± 3.02 years old, which is significantly younger than the dogs with secondary lens luxation (9.12 ± 3.38 years). Dogs with primary lens luxation showed a significantly higher rate of a bilateral development than those with secondary lens luxation (85.5 % of the dogs with primary lens luxation and only 14.5 % of the dogs with secondary lens luxation showed it in both their eyes).

  20. Interpreting potential markers of storage and rehearsal: Implications for studies of verbal short-term memory and neuropsychological cases.

    Science.gov (United States)

    Wang, Xiaoli; Logie, Robert H; Jarrold, Christopher

    2016-08-01

    Neuropsychological studies of verbal short-term memory have often focused on two signature effects - phonological similarity and word length - the absence of which has been taken to indicate problems in phonological storage and rehearsal respectively. In the present study we present a possible alternative reading of such data, namely that the absence of these effects can follow as a consequence of an individual's poor level of recall. Data from a large normative sample of 251 adult participants were re-analyzed under the assumption that the size of phonological similarity and word length effects are proportional to an individual's overall level of recall. For both manipulations, when proportionalized effects were plotted against memory span, the same function fit the data in both auditory and visual presentation conditions. Furthermore, two additional sets of single-case data were broadly comparable to those that would be expected for an individual's level of verbal short-term memory performance albeit with some variation across tasks. These findings indicate that the absolute magnitude of phonological similarity and word length effects depends on overall levels of recall, and that these effects are necessarily eliminated at low levels of verbal short-term memory performance. This has implications for how one interprets any variation in the size of these effects, and raises serious questions about the causal direction of any relationship between impaired verbal short-term memory and the absence of phonological similarity or word length effects.

  1. Assessment of environmental risk for red mud storage facility in China: a case study in Shandong Province.

    Science.gov (United States)

    Wen, Zhi-Chao; Ma, Shu-Hua; Zheng, Shi-Li; Zhang, Yi; Liang, Yan

    2016-06-01

    Red mud storage facility (RM-SF) pollution remains a serious problem in China mainly due to the RM's huge quantity, little recyclability, and high alkalinity. And, there is also a risk of dam failure because almost all RM-SFs are processed by damming. In order to address this challenge and improve the level of risk management, it is necessary to evaluate the environmental risk of RM-SFs systematically. So, this paper firstly designs a comprehensive evaluation index system with a three-level evaluation index in the terms of RM characteristics, RM-SF characteristics, ambient environment of RM-SF, the management of RM-SF, and the application aspect of RM by the analytic hierarchy process (AHP) method. Then, a case of RM-SF from a typical alumina production enterprise is studied according to this system, as is assisted by several experts from different fields when determining the weights of all indicators. The results show that the risk of selected RM-SF primarily depends on the former factors, that is, RM and RM-SF characteristics, while the contributions of the other factors are quite smaller.

  2. The Deep Lens Survey

    CERN Document Server

    Wittman, D; Dell'Antonio, I P; Becker, A C; Margoniner, V E; Cohen, J; Norman, D; Loomba, D; Squires, G; Wilson, G; Stubbs, C; Hennawi, J F; Spergel, D N; Boeshaar, P C; Clocchiatti, A; Hamuy, M; Bernstein, G; González, A; Guhathakurta, R; Hu, W; Seljak, U; Zaritsky, D

    2002-01-01

    The Deep Lens Survey (DLS) is a deep BVRz' imaging survey of seven 2x2 degree fields, with all data to be made public. The primary scientific driver is weak gravitational lensing, but the survey is also designed to enable a wide array of other astrophysical investigations. A unique feature of this survey is the search for transient phenomena. We subtract multiple exposures of a field, detect differences, classify, and release transients on the Web within about an hour of observation. Here we summarize the scientific goals of the DLS, field and filter selection, observing techniques and current status, data reduction, data products and release, and transient detections. Finally, we discuss some lessons which might apply to future large surveys such as LSST.

  3. Distributed Leadership through the Lens of Activity Theory

    Science.gov (United States)

    Yuen, Jeanne Ho Pau; Victor Chen, Der-Thanq; Ng, David

    2016-01-01

    Purpose: Using Activity Theory as an interpretive lens to examine the distribution of leadership, this paper shares a case study on how leadership for an ICT project was distributed in a Singapore school. Method: The case study involved observations of 49 meetings and 34 interviews of leaders and the teachers who were involved in the ICT project.…

  4. Iris reconstruction combined with iris-claw intraocular lens implantation for the management of iris-lens injured patients

    Science.gov (United States)

    Hu, Shufang; Wang, Mingling; Xiao, Tianlin; Zhao, Zhenquan

    2016-01-01

    Aim: To study the efficiency and safety of iris reconstruction combined with iris-claw intraocular lens (IOL) implantation in the patients with iris-lens injuries. Settings and Design: Retrospective, noncomparable consecutive case series study. Materials and Methods: Eleven patients (11 eyes) following iris-lens injuries underwent iris reconstructions combined with iris-claw IOL implantations. Clinical data, such as cause and time of injury, visual acuity (VA), iris and lens injuries, surgical intervention, follow-up period, corneal endothelial cell count, and optical coherence tomography, were collected. Results: Uncorrected VA (UCVA) in all injured eyes before combined surgery was equal to or <20/1000. Within a 1.1–4.2-year follow-up period, a significant increase, equal to or better than 20/66, in UCVA was observed in six (55%) cases, and in best-corrected VA (BCVA) was observed in nine (82%) cases. Postoperative BCVA was 20/40 or better in seven cases (64%). After combined surgery, the iris returned to its natural round shape or smaller pupil, and the iris-claw IOLs in the 11 eyes were well-positioned on the anterior surface of reconstructed iris. No complications occurred in those patients. Conclusions: Iris reconstruction combined with iris-claw IOL implantation is a safe and efficient procedure for an eye with iris-lens injury in the absence of capsular support. PMID:27146932

  5. Transferring Lens Prescriptions Between Lens-Design Programs

    Science.gov (United States)

    Stacy, John E.; Wooley, Laura; Carlin, Brian

    1989-01-01

    Optical Lens Prescription Data Formatter computer program enables user to transfer complicated lens prescriptions quickly and easily from one major optical-design program to another and back again. One can take advantage of inherent strength of either program. Programs are ACCOS V from Scientific Calculations, Inc., of Fishers, NY, and CODE V from Optical Research Associates of Pasadena, CA. VAX version written in FORTRAN.

  6. Design of wide field and high resolution video lens

    Science.gov (United States)

    Xiao, Ze-xin; Zhan, Binzhou; Han, Haimei

    2009-11-01

    Online detecting is increasingly used in industrial process for the requirement of product quality improving. It is a trend that the "machine detecting" with "machine version + computer intelligence" as new method replaces traditional manual "eye observation". The essential of "machine detecting" is that image of object being collected with high resolution video lens on sensor panel of photoelectric (CCD ,CMOS) and detecting result being automatically gained by computer after the image saved and processed. "Machine detecting" is developing rapidly with the universal reception by enterprises because of its fine accurateness, high efficiency and the real time. Video lens is one of the important components of machine version system. Requirements of wide field and high resolution enlarged the complexity of video lens design. In this paper a design case used in visible light with field diameter Φ32mm, β=-0.25× and NA'=0.15. We give design parameters of the video lens which obtained with theoretically calculating and Oslo software optimization: MTF>0.3 in full field and 215lp/mm, distortion <0.05%.This lens has an excellent optic performance to match with 1.3 million pixels 1/2"CCD, and a high performance price ratio for being consist of only 7 single lens in the way of 5 units.

  7. Potentially pathogenic free-living amoebae in contact lenses of the asymptomatic contact lens wearers.

    Directory of Open Access Journals (Sweden)

    Maryam Niyyati

    2014-03-01

    Full Text Available Free-living amoebae (FLA including Acanthamoeba spp. and Hartmannella spp. are the causative agents of serious corneal infection especially within contact lens wearers. Thus contact lenses and their storage case could be a suitable niche for potentially pathogenic amoebae. The main objective of the present study was to evaluate the contamination of contact lenses to free living amoebae using morphological and sequencing based methods.Overall, 90 volunteers provided their contact lenses. All volunteers wore soft contact lenses. Both lenses were cultured in the same plate. Forty-eight of the volunteers were medical and dentistry student and 42 were ophthalmology attendees of hospitals in Tehran, Iran. All of the samples were inoculated to non-nutrient medium and monitored daily for the outgrowth of the amoebae. PCR and sequencing were performed using various primer pairs.Of the 90 volunteers, 9 (10% were positive for free-living amoebae outgrowth. Morphological analysis revealed that 3 isolates were belonged to Hartmannella genus according to small round cysts and 6 isolates were belonged to Acanthamoeba genus based on the star shape of endocysts. Sequencing revealed that Acanthamoeba belonged to T4, T3 and T5 genotype. Hartmannella were also belonged to vermiformis species.The presence of potentially pathogenic free living amoebae including Acanthamoeba and Hartmannella could be a high risk for people using soft contact lenses. These results revealed that improved clarification and professional recommendations for contact lens wearers is of utmost importance.

  8. Public concerns regarding the storage and secondary uses of residual newborn bloodspots: an analysis of print media, legal cases, and public engagement activities.

    Science.gov (United States)

    Cunningham, Shannon; O'Doherty, Kieran C; Sénécal, Karine; Secko, David; Avard, Denise

    2015-04-01

    Recently, public concerns have been expressed regarding the non-consented storage and secondary research uses of residual newborn bloodspot (RBS) samples. The purpose of this paper is to examine public responses to the storage and secondary uses of RBS that can be identified through analysis of media, legal cases, and documented public engagement activities. Coverage in the examined print media confirmed the importance of RBS to journalists and those people who expressed their concerns to these journalists. Several lawsuits, brought by parents concerned about the storage of newborn bloodspots, placed the practice of storing NBS into the spotlight. This resulted in controversial debates and the mandatory destruction of millions of samples. Analysis of public engagement activities across several jurisdictions indicated that across (inter)national boundaries there are common elements to what is perceived as inappropriate governance of RBS. Public concerns were grouped into five main themes: trust, transparency, confidentiality, ownership, and stigmatization/discrimination. The results of our analysis help to make a compelling case for placing citizens at the center of the debate and developing policy about the storage and secondary uses of newborn bloodspots.

  9. Silicone Oil Tamponade Combined with Lensectomy Preserving Anterior Lens Capsule

    Institute of Scientific and Technical Information of China (English)

    LuL; YangJ

    1999-01-01

    Purpose:To investigate the therapeutic effect and indicatio n of silicone oil tamponade combined with lensectomy preserving anterior lens capsule.Methods:Silicone oil tamponade combined with lensectomy preserving anterior lens capsule was performed in 33 cases (33 eyes)of high myopia ,proliferative vitroretinopathy(PVR)D grade and giant retinal tear(GRT).10 cases were onlyeye and 11 cases had harder nucleus of lens.The surgical methods included:1.smashing lens nucleus and lensectomy preserving complete anterior capsule;2,vitrectomy and membrane peeling;3,usage of liquid perfluorocarbin or retinotomy or drainage;4.silicone oil tamponade;5.postoperative Nd;YAG laser for anterior capsulectomy. Results:Follow-up time was 6 months or more in 29 cases.Total retinal reattachment was achieved in 22 cases,macular retinal reattachment in 5 cases.The visual acuity was 20/800 to 20/200 in 13 cases,20/100 to 20/50 in 12 cases.Visual acuity was significantly improved in GRT group(P<0.05).Complications included unexpected anterior capsule break intraoperatively,anterior capsule opacity,silicone oil emulsification and liquid perfluorocarbin remainig postoperatively.Conclusions:Silicone oil tamponade combined with lensectomy preserving anterior capsule was safe and can reduce the operative complications.The indications included:1.GRT complicated with high myopia;2,advanced PVR cases complicated with high myopia in which silicone oil must be used;3.severe lens opacity cases in which silicone oil must be used;4.complex retinal detachment of only ye.

  10. The Lissajous lens: a three-dimensional absolute optical instrument without spherical symmetry.

    Science.gov (United States)

    Danner, Aaron J; Dao, H L; Tyc, Tomáš

    2015-03-09

    We propose a three dimensional optical instrument with an isotropic gradient index in which all ray trajectories form Lissajous curves. The lens represents the first absolute optical instrument discovered to exist without spherical symmetry (other than trivial cases such as the plane mirror or conformal maps of spherically-symmetric lenses). An important property of this lens is that a three-dimensional region of space can be imaged stigmatically with no aberrations, with a point and its image not necessarily lying on a straight line with the lens center as in all other absolute optical instruments. In addition, rays in the Lissajous lens are not confined to planes. The lens can optionally be designed such that no rays except those along coordinate axes form closed trajectories, and conformal maps of the Lissajous lens form a rich new class of optical instruments.

  11. Long-term results of clear lens extraction combined with piggyback intraocular lens implantation to correct high hyperopia

    Directory of Open Access Journals (Sweden)

    Xia Hua

    2013-10-01

    Full Text Available AIM: To assess the refractive outcome of clear lensectomy combined with piggyback intraocular lens implantation in highly hyperopic patients.METHODS: This case review included 19 eyes of 10 patients with high hyperopia and axial length less than 21mm. Intraocular lens power was calculated for emmetropia using the Holladay II formula in 17 eyes, and SRK/T formula in 2 eyes following clear lens extraction and piggyback intraocular lens implantation. Patients were examined periodically over 24 months for visual acuity and spherical equivalent (SE.RESULTS: The mean postoperative SE at 24 months was 0.20±1.39D (range, -3.00 to 2.50D, better than preoperative 9.81±2.62D (range, +6.00 to +14.50D (PPP=0.34. Twelve eyes maintained and 1 gained 1 or more Snellen line of BCVA, 4 eyes lost 1 line, and 2 eyes lost 2 lines at 24 postoperative months. Twelve eyes best-corrected near visual acuity (BCNVA achieved J1 at postoperative 24 months compared to preoperative 7 eyes and the other 7 eyes better than J3.CONCLUSION: Clear lens extraction combined piggyback intraocular lens implantation appears to be an effective procedure to correct high hyperopia but mild overcorrection and intralenticular opacification may require secondary procedure.

  12. Connexin hemichannels in the lens

    Directory of Open Access Journals (Sweden)

    Eric C Beyer

    2014-02-01

    Full Text Available The normal function and survival of cells in the avascular lens is facilitated by intercellular communication through an extensive network of gap junctions formed predominantly by three connexins (Cx43, Cx46, and Cx50. In expression systems, these connexins can all induce hemi-channel currents, but other lens proteins (e.g., pannexin1 can also induce similar currents. Hemichannel currents have been detected in isolated lens fiber cells. These hemichannels may make significant contributions to normal lens physiology and pathophysiology. Studies of some connexin mutants linked to congenital cataracts have implicated hemichannels with aberrant voltage-dependent gating or modulation by divalent cations in disease pathogenesis. Hemichannels may also contribute to age- and disease-related cataracts.

  13. Gravitational lens surveys with LOFAR

    CERN Document Server

    Wucknitz, O

    2008-01-01

    Deep surveys planned as a Key Science Project of LOFAR provide completely new opportunities for gravitational lens searches. For the first time do large-scale surveys reach the resolution required for a direct selection of lens candidates using morphological criteria. We briefly describe the strategies that we will use to exploit this potential. The long baselines of an international E-LOFAR are essential for this project.

  14. Ascorbate in the ocular lens

    OpenAIRE

    Mody, Vino C. Jr

    2006-01-01

    Purpose: First, we intended to establish a method for sample preparation for measurement of ascorbate in whole rat and guinea pig lenses utilizing ultrafiltration and high performance liquid chromatography with ultraviolet radiation detection. Then, we aimed to investigate whether, in the albino rat, lens ascorbate concentration depends on solid dietary intake. Finally, we investigated if, in the pigmented guinea pig, lens ascorbate concentration may be elevated with drinkin...

  15. Phakic Intraocular lens- a review

    OpenAIRE

    Cruz, Francisco Miguel

    2015-01-01

    Introduction: Intraocular refractive procedures with the implantation of a Phakic Intraocular lens have become a safe efficient and predictable alternative for treating high ametropias when the use of corneal photoablative procedures is not possible. The implantation of Phakic intraocular lens preservs the accomodative function,is a reversable refractive procedure, with minimal induction of higher order aberrations compaed with corneal photoablative procedures. Methods: An analytical review o...

  16. A course in lens design

    CERN Document Server

    Velzel, Chris

    2014-01-01

    A Course in Lens Design is an instruction in the design of image-forming optical systems. It teaches how a satisfactory design can be obtained in a straightforward way. Theory is limited to a minimum, and used to support the practical design work. The book introduces geometrical optics, optical instruments and aberrations. It gives a description of the process of lens design and of the strategies used in this process. Half of its content is devoted to the design of sixteen types of lenses, described in detail from beginning to end. This book is different from most other books on lens design because it stresses the importance of the initial phases of the design process: (paraxial) lay-out and (thin-lens) pre-design. The argument for this change of accent is that in these phases much information can be obtained about the properties of the lens to be designed. This information can be used in later phases of the design. This makes A Course in Lens Design a useful self-study book, and a suitable basis for an intro...

  17. Numerical Simulations of Transverse Beam Diffusion Enhancement by the Use of Electron Lens in the Tevatron Collider

    Energy Technology Data Exchange (ETDEWEB)

    Previtali, V.; Stancari, G.; Valishev, A.; /Fermilab; Shatilov, D.N.; /Novosibirsk, IYF

    2012-05-01

    Transverse beam diffusion for the Tevatron machine has been calculated using the Lifetrac code. The following effects were included: random noise (representing residual gas scattering, voltage noise in the accelerating cavities) lattice nonlinearities and beam-beam interactions. The time evolution of particle distributions with different initial amplitudes in Hamiltonian action has been simulated for 6 million turns, corresponding to a time of about 2 minutes. For each particle distribution, several cases have been considered: a single beam in storage ring mode, the collider case and the effects of a hollow electron beam collimator. The diffusion coefficient for some representative points in the amplitude space has been calculated by fitting the time evolution of delta-like particle distributions using the diffusion equation, for different machine conditions. The results confirm a strong efficiency of the electron lens as an halo diffusive enhancer, leading to diffusion coefficients which are at least a factor 10K higher than the values obtained for the collision case. This result is confirmed by the Frequency Map Analysis, which shows a clear intensification of resonance lines for particle amplitudes larger than the electron lens inner radius. If compared with past experiments, the simulations successfully reproduce the diffusion coefficients for the beam core, but still present a large discrepancy for halo particles, still under investigation.

  18. Band-width performances of antennas based on leaky lens radiation

    NARCIS (Netherlands)

    Neto, A.; Bruniy, S.; Gerini, G.; Sabbadini, M.; Marliani, F.

    2005-01-01

    Leaky lens antennas are linearly polarised antennas constituted by long slots etched on a ground plane that separates a dense dielectric, shaped as a lens, from free space. Three different versions of the same antenna concept exist: multi-frequency, wide band, ultra-wide band. In all cases these ant

  19. Efficiency of Traditional Maize Storage and Control Methods in Rural Grain Granaries: a Case Study from Senegal

    Directory of Open Access Journals (Sweden)

    Gueye, MT.

    2013-01-01

    Full Text Available Maize storage and pest control method as practiced in traditional clay granaries in the Kédougou region in eastern Senegal were evaluated under rural conditions during two successive years. Three storage modes, i.e. maize cobs, winnowed and non-winnowed maize grains, were tested in seven granaries where the insecticidal plants Hyptis spicigera or H. suaveolens were either incorporated in the store structure or deposited as layers intermittently with maize. At the beginning of the storage period, all granaries were artificially infested with 7 pairs Tribolium castaneum and Sitophilus zeamais. No damage, losses or live insects were observed during 7 months of storage when maize cobs were placed between layers of H. spicigera. Compared with the control, incorporation of insecticidal plants within the granary bottom had no significant effect on the damage and loss level irrespective of the storage mode. Non-winnowed maize always suffered less damage and losses than the winnowed variant. In all granaries depredation, insect abundance and moisture content were highest toward the end of storage period between June and July.

  20. The 2010 IODC lens design problem: the green lens

    Science.gov (United States)

    Juergens, Richard C.

    2010-08-01

    The lens design problem for the 2010 IODC is to design a 100 mm focal length lens in which every optical surface has the same radius of curvature, positive or negative, or is plano. The lens is used monochromatically at 532 nm and is made of only Schott N-BK7 glass. The goal of the problem is to maximize the product of the semi-field of view and the entrance pupil diameter while holding the distortion to within +/-5% and the RMS wavefront error to <= 0.07 wave within the field of view. There were 37 entries from eight different countries. Four different commercial lens design programs were used, along with two custom, in-house programs. The number of lens elements in the entries ranged from 3 to 64. The overall length of the lenses varied from 105 mm to 3.6 km. The winning entry had an entrance pupil diameter of 81.3 mm and a semi-field of view of 43.5° for a merit function product of 3537.

  1. Real-time 3D display system based on computer-generated integral imaging technique using enhanced ISPP for hexagonal lens array.

    Science.gov (United States)

    Kim, Do-Hyeong; Erdenebat, Munkh-Uchral; Kwon, Ki-Chul; Jeong, Ji-Seong; Lee, Jae-Won; Kim, Kyung-Ah; Kim, Nam; Yoo, Kwan-Hee

    2013-12-01

    This paper proposes an open computer language (OpenCL) parallel processing method to generate the elemental image arrays (EIAs) for hexagonal lens array from a three-dimensional (3D) object such as a volume data. Hexagonal lens array has a higher fill factor compared to the rectangular lens array case; however, each pixel of an elemental image should be determined to belong to the single hexagonal lens. Therefore, generation for the entire EIA requires very large computations. The proposed method reduces processing time for the EIAs for a given hexagonal lens array. By using the proposed image space parallel processing (ISPP) method, it can enhance the processing speed that generates the 3D display of real-time interactive integral imaging for hexagonal lens array. In our experiment, we implemented the EIAs for hexagonal lens array in real-time and obtained a good processing time for a large of volume data for multiple cases of lens arrays.

  2. Towards a framework for evaluation of renewable energy storage projects: A study case of hydrogen and fuel cells in Denmark

    DEFF Research Database (Denmark)

    Tambo, Torben; Enevoldsen, Peter

    2015-01-01

    Renewable energy is characterized by its intermittency and a general dislocation between places of production and places of use. To overcome the intermittency, renewable energy storage (RES) is critical in the design of a future carbon-free society. More than 700 RES projects are in the pipeline...... on governmental subsidies or high-risk venture capital. RES projects are along the energy agenda following an agenda of industrial development. The research question of this paper is: Given the high degree of uncertainty and low degree of technological maturity in energy storage, how to design evaluation...... frameworks and approaches for energy storage projects? The paper consists of: (1) A literature review of evaluation frameworks for major technological transformations related to energy or more unrelated: main reference class forecasting (Flyvbjerg, 2006), OECD, IEA, and Jesus-Hitzschky (JTMI, 2007). (2...

  3. [Intraocular lenses for the correction of refraction errors. Part II. Phakic posterior chamber lenses and refractive lens exchange with posterior chamber lens implantation].

    Science.gov (United States)

    Kohnen, T; Kasper, T; Terzi, E

    2005-11-01

    In this overview, the current status of intraocular lens surgery to correct refractive error is reviewed. The interventions are divided into additive surgery with intraocular lens implantation without extraction of the crystalline lens (phakic intraocular lens, PIOL) or removal of the crystalline lens with implantation of an IOL (refractive lens exchange, RLE). Phakic IOLs are constructed as angle-supported or iris-fixated anterior chamber lenses and posterior chamber lenses which are fixated in the ciliary sulcus. The implantation of phakic IOLs has been demonstrated to be an effective, safe, predictable and stable procedure to correct higher refractive errors. Complications are rare and differ for the three types of PIOL; for posterior chamber lenses these are mainly cataract formation and pigment dispersion. RLE is preferable in cases of high ametropia in which the natural lens has lost its accommodative effect. The main complications for myopic RLA include retinal detachment, while hyperopic refractive lens exchange may be associated with surgical problems in the narrower anterior eye segment.

  4. The Risk of Contact Lens Wear and the Avoidance of Complications

    Directory of Open Access Journals (Sweden)

    Farihah Tariq

    2013-11-01

    Full Text Available Contact lenses are lenses placed on the surface of the cornea to correct refractive errors such as myopia (short-sightedness, hypermetropia (far-sightedness and astigmatism. Lens-related complications are becoming a greater health concern as increasing number of individuals are using them as an alternative to spectacles. Contact lenses alter the natural ocular environment and reduce the efficacy of the innate defences. Although many complications are minor, microbial keratitis is potentially blinding and suspected cases should be rapidly diagnosed and referred to an ophthalmologist for treatment. Several risk factors have been identified with extended wear, poor hand hygiene, inadequate lens and lens-case care being the most significant. Promotion of good contact lens hygiene and practices are essential to reduce the adverse effects of contact lens wear.

  5. Monitoring the eye lens: which dose quantity is adequate?

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, R [Physikalisch-Technische Bundesanstalt, Bundesallee 100, D-38116 Braunschweig (Germany); Dietze, G, E-mail: rolf.behrens@ptb.d [Paracelsusstrasse 7, D-38116 Braunschweig (Germany)

    2010-07-21

    Recent epidemiological studies suggest a rather low dose threshold (below 0.5 Gy) for the induction of a cataract of the eye lens. Some other studies even assume that there is no threshold at all. Therefore, protection measures have to be optimized and current dose limits for the eye lens may be reduced in the future. The question of which personal dose equivalent quantity is appropriate for monitoring the dose to the eye lens arises from this situation. While in many countries dosemeters calibrated in terms of the dose equivalent quantity H{sub p}(0.07) have been seen as being adequate for monitoring the dose to the eye lens, this might be questionable in the case of reduced dose limits and, thus, it may become necessary to use the dose equivalent quantity H{sub p}(3) for this purpose. To discuss this question, the dose conversion coefficients for the equivalent dose of the eye lens (in the following eye lens dose) were determined for realistic photon and beta radiation fields and compared with the values of the corresponding conversion coefficients for the different operational quantities. The values obtained lead to the following conclusions: in radiation fields where most of the dose comes from photons, especially x-rays, it is appropriate to use dosemeters calibrated in terms of H{sub p}(0.07) on a slab phantom, while in other radiation fields (dominated by beta radiation or unknown contributions of photon and beta radiation) dosemeters calibrated in terms of H{sub p}(3) on a slab phantom should be used. As an alternative, dosemeters calibrated in terms of H{sub p}(0.07) on a slab phantom could also be used; however, in radiation fields containing beta radiation with the end point energy near 1 MeV, an overestimation of the eye lens dose by up to a factor of 550 is possible.

  6. Slotting optimization of automated storage and retrieval system (AS/RS) for efficient delivery of parts in an assembly shop using genetic algorithm: A case Study

    Science.gov (United States)

    Yue, L.; Guan, Z.; He, C.; Luo, D.; Saif, U.

    2017-06-01

    In recent years, the competitive pressure on manufacturing companies shifted them from mass production to mass customization to produce large variety of products. It is a great challenge for companies nowadays to produce customized mixed flow mode of production to meet customized demand on time. Due to large variety of products, the storage system to deliver variety of products to production lines influences on the timely production of variety of products, as investigated from by simulation study of an inefficient storage system of a real Company, in the current research. Therefore, current research proposed a slotting optimization model with mixed model sequence to assemble in consideration of the final flow lines to optimize whole automated storage and retrieval system (AS/RS) and distribution system in the case company. Current research is aimed to minimize vertical height of centre of gravity of AS/RS and total time spent for taking the materials out from the AS/RS simultaneously. Genetic algorithm is adopted to solve the proposed problem and computational result shows significant improvement in stability and efficiency of AS/RS as compared to the existing method used in the case company.

  7. Combined aniridic intraocular lens implantation and vitreoretinal surgery

    Directory of Open Access Journals (Sweden)

    Mehta Hitendra

    2007-01-01

    Full Text Available A 45-year-old man presented with post-traumatic aniridia. We describe the combined surgery done to treat both aniridia and epiretinal membrane simultaneously. A combined aniridia intraocular lens and vitreoretinal surgery was done. The case report highlights the advantage of combined surgery in terms of cost factor and surgical time.

  8. [Lens prescription for rigid contact lenses in keratoconus].

    Science.gov (United States)

    Manea, Georgiana

    2012-01-01

    Rigid Gas-Permeable contact lenses is a less risky option for improving the quality of vision in corneal ectasias such as keratoconus. They reshape the corneal surface (flattens the cornea) so that in most cases, with a proper lens, the patient can reach a visual acuity of 20/20.

  9. Acanthamoeba sp.: un caso de queratitis no relacionada con el uso de lentes de contacto Acanthamoeba sp.: a case report in a non-contact lens wearer

    Directory of Open Access Journals (Sweden)

    Claudia Menghi

    2012-12-01

    Full Text Available La queratitis por Acanthamoeba sp. generalmente se relaciona con el uso de lentes de contacto y en menor proporción se vincula con el contacto con agua contaminada. Se caracteriza por una disminución de la capacidad visual y la presencia de un fuerte dolor ocular. al examen clínico, puede confundirse con una infección herpética. Si la infección no es diagnosticada y tratada a tiempo en forma adecuada, puede culminar en la perforación de la córnea y, eventualmente, en la pérdida del ojo. en este trabajo se informa uno de los pocos casos registrados de queratitis por Acanthamoeba sp. no relacionada con el uso de lentes de contacto.Acanthamoeba sp. keratitis is generally related to wearing contact lenses, and, to a lesser extent, to contaminated water. it is characterized by reduced visual capacity and the presence of severe ocular pain. Clinically, it can be mistaken for a herpes infection. if it is not diagnosed, and timely and adequately treated, it can result in corneal perforation and, eventually, in vision loss. One of the few registered cases of Acanthamoeba sp. keratitis not related to the use of contact lenses is herein reported.

  10. Comparison of visual outcomes after implantation of diffractive trifocal toric intraocular lens and a diffractive apodized bifocal toric intraocular lens

    Science.gov (United States)

    Gundersen, Kjell Gunnar; Potvin, Rick

    2016-01-01

    Purpose The aim of this study was to compare a new diffractive trifocal toric lens with an apodized diffractive bifocal toric lens in terms of refractive and visual acuity (VA) outcomes, including low-contrast VA (LCVA), as well as the patient’s visual function 3 months after implantation. Patients and methods This is a randomized prospective study involving bilateral implantation of a trifocal toric or a bifocal toric lens. At 3 months postoperatively, the subject’s vision was tested both uncorrected and with his/her best distance correction at: distance (4 m), intermediate (63 cm), and near (40 cm). Binocular defocus curves were measured with no correction and with the subject’s best distance correction in place. Quality of vision was measured using the National Eye Institute Visual Function Questionnaire. Results A total of 22 patients were enrolled (eleven in each group). There was no statistically significant difference in the absolute change in measured rotation between 1 month and 3 months postoperatively between the two intraocular lens (IOL) groups (P=0.98). At 3 months, the postoperative refraction and distance VA by eye were similar between groups. There was no statistically significant difference in the measured LCVA between groups (P=0.39). The defocus curve showed that at 67 cm, the trifocal toric lens had statistically significantly better VA when compared to the bifocal toric lens. There were no statistically significant differences by group for any of the National Eye Institute Visual Function Questionnaire scores (P>0.26 in all cases). Conclusion The trifocal toric IOL improved the intermediate vision without negatively impacting visual function and distance, near, or low-contrast VA when compared to a bifocal toric IOL. The toric component of the trifocal lens effectively reduced astigmatism and provided good rotational stability. PMID:27051269

  11. Tinting of intraocular lens implants

    Energy Technology Data Exchange (ETDEWEB)

    Zigman, S.

    1982-06-01

    Intraocular lens (IOL) implants of polymethyl methacrylate (PMMA) lack an important yellow pigment useful as a filter in the visual process and in the protection of the retina from short-wavelength radiant energy. The ability to produce a yellow pigment in the PMMA used in IOL implants by exposure to near-ultraviolet (UV) light was tested. It was found that the highly cross-linked material in Copeland lens blanks was tinted slightly because of this exposure. The absorptive properties of lens blanks treated with near-UV light in this way approached that of the absorptive properties of human lenses. This finding shows that it is possible to alter IOL implants simply so as to induce a pale-yellow pigment in them to improve the visual process and to protect the retinas of IOL users.

  12. International rigid contact lens prescribing.

    Science.gov (United States)

    Efron, Nathan; Morgan, Philip B; Helland, Magne; Itoi, Motozumi; Jones, Deborah; Nichols, Jason J; van der Worp, Eef; Woods, Craig A

    2010-06-01

    Rigid lenses have been fitted less since the introduction of soft lenses nearly 40 years ago. Data that we have gathered from annual contact lens fitting surveys conducted in Australia, Canada, Japan, the Netherlands, Norway, the UK and the USA between 2000 and 2008 facilitate an accurate characterization of the pattern of the decline of rigid lens fitting during the first decade of this century. There is a trend for rigid lenses to be utilized primarily for refitting those patients who are already successful rigid lens wearers-most typically older females being refit with higher Dk materials. Rigid lenses are generally fitted on a full-time basis (four or more days of wear per week) without a planned replacement schedule. Orthokeratology is especially popular in the Netherlands, but is seldom prescribed in the other countries surveyed.

  13. The SNAP Strong Lens Survey

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, P.

    2005-01-03

    Basic considerations of lens detection and identification indicate that a wide field survey of the types planned for weak lensing and Type Ia SNe with SNAP are close to optimal for the optical detection of strong lenses. Such a ''piggy-back'' survey might be expected even pessimistically to provide a catalogue of a few thousand new strong lenses, with the numbers dominated by systems of faint blue galaxies lensed by foreground ellipticals. After sketching out our strategy for detecting and measuring these galaxy lenses using the SNAP images, we discuss some of the scientific applications of such a large sample of gravitational lenses: in particular we comment on the partition of information between lens structure, the source population properties and cosmology. Understanding this partitioning is key to assessing strong lens cosmography's value as a cosmological probe.

  14. Planar immersion lens with metasurfaces

    CERN Document Server

    Ho, John S; Tanabe, Yuji; Yeh, Alexander J; Fan, Shanhui; Poon, Ada S Y

    2015-01-01

    The solid immersion lens is a powerful optical tool that allows light entering material from air or vacuum to focus to a spot much smaller than the free-space wavelength. Conventionally, however, they rely on semispherical topographies and are non-planar and bulky, which limits their integration in many applications. Recently, there has been considerable interest in using planar structures, referred to as metasurfaces, to construct flat optical components for manipulating light in unusual ways. Here, we propose and demonstrate the concept of a planar immersion lens based on metasurfaces. The resulting planar device, when placed near an interface between air and dielectric material, can focus electromagnetic radiation incident from air to a spot in material smaller than the free-space wavelength. As an experimental demonstration, we fabricate an ultrathin and flexible microwave lens and further show that it achieves wireless energy transfer in material mimicking biological tissue.

  15. Algebraic Lens Distortion Model Estimation

    Directory of Open Access Journals (Sweden)

    Luis Alvarez

    2010-07-01

    Full Text Available A very important property of the usual pinhole model for camera projection is that 3D lines in the scene are projected to 2D lines. Unfortunately, wide-angle lenses (specially low-cost lenses may introduce a strong barrel distortion, which makes the usual pinhole model fail. Lens distortion models try to correct such distortion. We propose an algebraic approach to the estimation of the lens distortion parameters based on the rectification of lines in the image. Using the proposed method, the lens distortion parameters are obtained by minimizing a 4 total-degree polynomial in several variables. We perform numerical experiments using calibration patterns and real scenes to show the performance of the proposed method.

  16. Key Performance Criteria Affecting the Most the Safety of a Nuclear Waste Long Term Storage : A Case Study Commissioned by CEA

    Energy Technology Data Exchange (ETDEWEB)

    Marvy, A.; Lioure, A; Heriard-Dubreuil, G.; Gadbois, S.; Schneider, T.; Schieber, C.

    2003-02-24

    As part of the work scope set in the French law on high level long lived waste R&D passed in 1991, CEA is conducting a research program to establish the scientific basis and assess the feasibility of long term storage as an option for the safe management of nuclear waste for periods as long as centuries. This goal is a significant departure from the current industrial practice where storage facilities are usually built to last only a few decades. From a technical viewpoint such an extension in time seems feasible provided care and maintenance is exercised. Considering such long periods of time, the risk for Society of loosing oversight and control of such a facility is real, which triggers the question of whether and how long term storage safety can be actually achieved. Therefore CEA commissioned a study (1) in which MUTADIS Consultants (2) and CEPN (3) were both involved. The case study looks into several past and actual human enterprises conducted over significant periods o f time, one of them dating back to the end of the 18th century, and all identified out of the nuclear field. Then-prevailing societal behavior and organizational structures are screened out to show how they were or are still able to cope with similar oversight and control goals. As a result, the study group formulated a set of performance criteria relating to issues like responsibility, securing funds, legal and legislative implications, economic sustainable development, all being areas which are not traditionally considered as far as technical studies are concerned. These criteria can be most useful from the design stage onward, first in an attempt to define the facility construction and operating guiding principles, and thereafter to substantiate the safety case for long term storage and get geared to the public dialogue on that undertaking should it become a reality.

  17. Contact lens-related acanthamoeba keratitis.

    Science.gov (United States)

    Stapleton, Fiona; Ozkan, Jerome; Jalbert, Isabelle; Holden, Brien A; Petsoglou, Con; McClellan, Kathy

    2009-10-01

    Acanthamoeba keratitis is a rare but severe disease, with more than 95% of cases occurring in contact lens wearers. With a worldwide resurgence of contact lens-related disease, this report illustrates the clinical characteristics and treatment challenges representative of this disease. This report describes Acanthamoeba keratitis in a 47-year-old female using extended wear silicone hydrogel contact lenses, with a history of swimming in a home pool and failure to subsequently disinfect the contact lenses. The diagnosis was based on clinical signs, disease course, and confocal microscopy results despite a negative result for corneal smear and culture. The corneal signs included an epithelial defect, epithelial irregularities, anterior stromal infiltrates, perineural infiltrates, an anterior stromal ring infiltrate, and hypopyon. The case was diagnosed as an infective keratitis and treated promptly using intensive topical administration of fortified gentamicin and cephalothin. The high likelihood Acanthamoeba prompted immediate use of polyhexamethylbiguanide and chlorhexidine, with propamide and adjunct treatment using atropine and oral diclofenac. Steroids were added on day 3, and the frequency of administration of antibacterial treatment was gradually reduced and ceased by day 10. The analgesia was stopped at 3 months. The frequency of administration of antiamoeba therapy and steroid treatment was slowly reduced and all treatment was ceased after 18 months. Despite considerable morbidity in terms of the treatment duration, hospitalization, outpatient appointments, and associated disease costs, the final visual outcome (6/6) was excellent.

  18. Geochemical evaluation of CO2 injection into storage reservoirs based on case-studies in The Netherlands

    NARCIS (Netherlands)

    Tambach, T.; Koenen, M.; Bergen, F. van

    2011-01-01

    Over the past few years several geochemical evaluations of CO2 storage in Dutch potential reservoirs are carried out, including predictions of the short- and long-term impact of CO2 on the reservoir using geochemical modelling. The initial mineralogy of the reservoir is frequently obtained from core

  19. Towards a framework for evaluation of renewable energy storage projects: A study case of hydrogen and fuel cells in Denmark

    DEFF Research Database (Denmark)

    Tambo, Torben; Enevoldsen, Peter

    2015-01-01

    worldwide, and market potentials are projected as immense. RES is complicated, and projects persistently fail to present operational scale of operations except for a few “classical” storage technologies: Variants of lead-acid batteries and pumped hydro-power reservoirs. Most RES projects are relying...

  20. Disk Tree——A Case of Parallel Storage Architecture to Improve Performance in Random Access Pattern

    Institute of Scientific and Technical Information of China (English)

    ZHOUKe; HUANGYongfeng; ZHANGJiangling; FENGDan; WANGFang

    2005-01-01

    Parallelism is an important way to improve the performance of a storage device. RAID (Redundant array of independent disk) is an example, which uses multi channels to realize parallelism of disk operation. While,because of the limits of bus and channel speed, the number of parallel channels in RAID cannot be increased as far as we wish. In order to break the bottleneck of bus, this paper presents a new approach of storage architecture, disk tree. Disk tree is a tree structure and uses unit controller as a node, which has one channel to connect with up node and two or three channels to connect with down nodes. Disk is the leaf of this tree. In host, multi storage spaces of multi channels are virtualized to a storage space. This paper builds SPN (Stochastic Petri net) model of RAID and unit controller of disk tree, analyzes average utilization of string controller, discusses some basic issues of disk tree,including its architecture, data striping, and gives some results of an implementation of this architecture.

  1. Lens siderosis resulting from a small intralenticular metallic foreign body

    Directory of Open Access Journals (Sweden)

    Shah, Mehul A.

    2015-11-01

    Full Text Available We report a rare case of lens siderosis with an undetectable intraocular foreign body by imaging. An 8-year-old boy presented with diminution of vision in the left eye since 3 months. His parents gave a preceding uncertain history of a foreign body injury to his left eye 3 months ago while playing. Presenting visual acuity in the left eye was perception of hand movements. Slit-lamp examination revealed a total white cataract with brownish-pigmented spots on the anterior capsule of the lens, but no intraocular foreign body was found. There was also no evidence of an intraocular foreign body on ultrasonography. Patient underwent cataract extraction with intraocular lens implantation. During the operation, a small (2×1×1 mm in size intralenticular foreign body of metal material was found and removed carefully with a magnet. The patient regained 20/30 vision after surgery.

  2. An integral-field spectroscopic strong lens survey

    Energy Technology Data Exchange (ETDEWEB)

    Bolton, Adam S [Harvard-Smithsonian Center for Astrophysics, 60 Garden St. MS-20, Cambridge, MA 02138 (United States); Burles, Scott [Department of Physics and Kavli Institute, Massachusetts Institute of Technology, 77 Massachusetts Ave., Cambridge, MA 02139 (United States)

    2007-12-15

    We present the observational results of a survey for strong gravitational lens systems consisting of extended emission-line galaxies lensed by intervening early-type galaxies, conducted using integral field units (IFUs) of the Magellan IMACS and Gemini GMOS-N spectrographs. These data are highly valuable for corroborating the lensing interpretation of Hubble Space Telescope imaging data. We show that in many cases, ground-based IFU spectroscopy is in fact competitive with space-based imaging for the measurement of the mass model parameters of the lensing galaxy. We demonstrate a novel technique of three-dimensional gravitational lens modeling for a single lens system with a resolved lensed rotation curve. We also describe the details of our custom IFU data analysis software, which performs optimal multi-fiber extraction, relative and absolute wavelength calibration to a few hundredths of a pixel RMS and nearly Poisson-limited sky subtraction.

  3. Bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome

    Directory of Open Access Journals (Sweden)

    Sahu, Sabin

    2016-12-01

    Full Text Available A rare case of bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome is reported. A 21-year-old female presented with decreased vision in both eyes. Her unaided visual acuity was 20/200 and 20/400 in the right and left eye, respectively, improving to 20/40 with –4.5 DS/–3.0 DC x 10° correction in the right eye and 20/80 with –10.0 DS/–6.5 Dc x10° correction in the left eye. On slit lamp examination under mydriasis, both eyes revealed ectopia lentis with lens coloboma and stretched zonules. Fundus examination revealed pigmentary changes at the fovea. On systemic evaluation, she was diagnosed with Marfan syndrome. She was prescribed a refractive correction in form of a contact lens and kept under observation.

  4. Bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome

    Science.gov (United States)

    Sahu, Sabin; Yadav, Reena; Gupta, Sharad; Raj Puri, Lila

    2016-01-01

    A rare case of bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome is reported. A 21-year-old female presented with decreased vision in both eyes. Her unaided visual acuity was 20/200 and 20/400 in the right and left eye, respectively, improving to 20/40 with –4.5 DS/–3.0 DC x 10° correction in the right eye and 20/80 with –10.0 DS/–6.5 Dc x10° correction in the left eye. On slit lamp examination under mydriasis, both eyes revealed ectopia lentis with lens coloboma and stretched zonules. Fundus examination revealed pigmentary changes at the fovea. On systemic evaluation, she was diagnosed with Marfan syndrome. She was prescribed a refractive correction in form of a contact lens and kept under observation. PMID:28028488

  5. Misdiagnosis induced intraocular lens dislocation in anterior megalophthalmos

    Institute of Scientific and Technical Information of China (English)

    WANG Qi-wei; XU Wen; ZHU Ya-nan; LI Jin-yu; ZHANG Li; YAO Ke

    2012-01-01

    Anterior megalophthalmos (AM) is an uncommon developmental anomaly of the anterior segment of the eye with a constellation of findings that includes enlarged cornea,deep anterior chamber,posterior positioning of the iris and lens,iris stroma atrophy,hypoplasia of iris dilator,pupil displacement,large capsular bag,lens subluxation,prematurely cataract and the tendency to retinal detachment.AM,especially when symptoms are mild,is not an easy disease to diagnose.We present 3 AM cases that were misdiagnosed as congenital cataract with weak zonule and megalocornea.Intraocular lenses (IOLs) dislocated after standard cataract surgeries and subsequent surgery (replacing the dislocated IOLs with iris-claw intraocular lenses) achieved satisfactory outcome.Although rare,AM should be included in the differential diagnosis of enlarged cornea and we recommend implanting Artisan lens in AM patients.

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... to my eye like a suction cup." Halloween is a popular time for people to use colored ... at Case Western Reserve University in Cleveland. "This is far from the truth." Real People, Real Problems ...

  7. Implante intra-ocular de lentes dobráveis "piggyback" em paciente portador de catarata congênita no primeiro ano de vida: relato de caso Piggyback foldable intraocular lens implant in patient with congenital cataract in the first year of life: case report

    Directory of Open Access Journals (Sweden)

    Leonardo Akaishi

    2004-12-01

    Full Text Available No presente relato os autores descrevem um caso de catarata congênita unilateral tratada cirurgicamente com implante intra-ocular de lentes dobráveis "piggyback", ainda não descrito na literatura nacional. São analisadas as diferenças e semelhanças com outros casos descritos na literatura.The authors report a case of congenital cataract, which was treated with piggyback foldable intraocular lens implant, not described in the Brazilian literature. The differences and similarities are analyzed with other reported cases in the literature.

  8. Time lens assisted photonic sampling extraction

    Science.gov (United States)

    Petrillo, Keith Gordon

    Telecommunication bandwidth demands have dramatically increased in recent years due to Internet based services like cloud computing and storage, large file sharing, and video streaming. Additionally, sensing systems such as wideband radar, magnetic imaging resonance systems, and complex modulation formats to handle large data transfer in telecommunications require high speed, high resolution analog-to-digital converters (ADCs) to interpret the data. Accurately processing and acquiring the information at next generation data rates from these systems has become challenging for electronic systems. The largest contributors to the electronic bottleneck are bandwidth and timing jitter which limit speed and reduce accuracy. Optical systems have shown to have at least three orders of magnitude increase in bandwidth capabilities and state of the art mode locked lasers have reduced timing jitters into thousands of attoseconds. Such features have encouraged processing signals without the use of electronics or using photonics to assist electronics. All optical signal processing has allowed the processing of telecommunication line rates up to 1.28 Tb/s and high resolution analog-to-digital converters in the 10s of gigahertz. The major drawback to these optical systems is the high cost of the components. The application of all optical processing techniques such as a time lens and chirped processing can greatly reduce bandwidth and cost requirements of optical serial to parallel converters and push photonically assisted ADCs into the 100s of gigahertz. In this dissertation, the building blocks to a high speed photonically assisted ADC are demonstrated, each providing benefits to its own respective application. A serial to parallel converter using a continuously operating time lens as an optical Fourier processor is demonstrated to fully convert a 160-Gb/s optical time division multiplexed signal to 16 10-Gb/s channels with error free operation. Using chirped processing, an

  9. Spectral analysis and comparison of mineral deposits forming in opacified intraocular lens and senile cataractous lens

    Science.gov (United States)

    Lin, Shan-Yang; Chen, Ko-Hwa; Lin, Chih-Cheng; Cheng, Wen-Ting; Li, Mei-Jane

    2010-10-01

    This preliminary report was attempted to compare the chemical components of mineral deposits on the surfaces of an opacified intraocular lens (IOL) and a calcified senile cataractous lens (SCL) by vibrational spectral diagnosis. An opacified intraocular lens (IOL) was obtained from a 65-year-old male patient who had a significant decrease in visual acuity 2-years after an ocular IOL implantation. Another SCL with grayish white calcified plaque on the subcapsular cortex was isolated from a 79-year-old male patient with complicated cataract after cataract surgery. Optical light microscope was used to observe both samples and gross pictures were taken. Fourier transform infrared (FT-IR) and Raman microspectroscopic techniques were employed to analyze the calcified deposits. The curve-fitting algorithm using the Gaussian function was also used to quantitatively estimate the chemical components in each deposit. The preliminary results of spectral diagnosis indicate that the opacified IOL mainly consisted of the poorly crystalline, immature non-stoichiometric hydroxyapatite (HA) with higher content of type B carbonated apatites. However, the calcified plaque deposited on the SCL was comprised of a mature crystalline stoichiometric HA having higher contents of type A and type B carbonate apatites. More case studies should be examined in future.

  10. Panoramic lens designed with transformation optics

    Science.gov (United States)

    Wang, Huaping; Deng, Yangyang; Zheng, Bin; Li, Rujiang; Jiang, Yuyu; Dehdashti, Shahram; Xu, Zhiwei; Chen, Hongsheng

    2017-01-01

    The panoramic lens is a special kind of lens, which is applied to observe full view. In this letter, we theoretically present a panoramic lens (PL) using transformation optics method. The lens is designed with inhomogeneous and anisotropic constitutive parameters, which has the ability to gather light from all directions and confine light within the visual angle of observer. Simulation results validate our theoretical design.

  11. SimpLens: Interactive gravitational lensing simulator

    Science.gov (United States)

    Saha, Prasenjit; Williams, Liliya L. R.

    2016-06-01

    SimpLens illustrates some of the theoretical ideas important in gravitational lensing in an interactive way. After setting parameters for elliptical mass distribution and external mass, SimpLens displays the mass profile and source position, the lens potential and image locations, and indicate the image magnifications and contours of virtual light-travel time. A lens profile can be made shallower or steeper with little change in the image positions and with only total magnification affected.

  12. Modified technique of endocapsular lens aspiration for severely subluxated lenses.

    Science.gov (United States)

    Khokhar, S; Aron, N; Yadav, N; Pillay, G; Agarwal, E

    2017-08-11

    PurposeSeverely subluxated crystalline lenses pose a difficult situation to anterior segment surgeons and can only be managed surgically by removal of the lens as well as the capsular bag. Several techniques have been described in literature for the management of such cases. We describe a modified technique of endocapsular lens aspiration by the limbal route for lens extraction through small incisions on the cornea.Patients and methodsThirty-two eyes of 16 consecutive patients with severely subluxated crystalline lenses were recruited in the study. All eyes underwent a modified technique of lens aspiration within the capsular bag using a single instrument, vitrectomy cutter, and irrigation cannula, followed by sacrificing of the capsular bag. The patients were either left aphakic or implanted with an open loop anterior chamber intraocular lens (ACIOL Kelman Multiflex) and prospectively followed up for a period of 3 months.ResultsThe mean age of the patients was 9 years 3 months±3 years (range 5-15 yrs). All eyes underwent complete lens aspiration within the capsular bag with no dislocation of the lens matter. ACIOL was inserted in 22 eyes (68.7%) and 10 eyes (31.2%) were left aphakic. All the surgeries were uneventful. The mean best corrected visual acuity (BCVA) at 3 months post surgery was 0.47±0.11 logMAR which was significantly better than pre-operative BCVA (P=0.001). The percentage endothelial cell loss at 3 months was 7.1%. There was no evidence of glaucoma, corneal decompensation, or retinal detachment. The astigmatism which increased from 1.45D±086 preoperatively to 3.76D±2.02 1 week post-operatively due to sutures reduced to 1.97D±0.81 post suture removal at 3 months.ConclusionThe modified technique of endocapsular lens aspiration proves to be a simple and effective method of removal of the lens-capsular bag complex in severely subluxated lenses.Eye advance online publication, 11 August 2017; doi:10.1038/eye.2017.160.

  13. In vivo human crystalline lens topography.

    Science.gov (United States)

    Ortiz, Sergio; Pérez-Merino, Pablo; Gambra, Enrique; de Castro, Alberto; Marcos, Susana

    2012-10-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye with known surfaces geometry and on a human lens in vitro, and demonstrated on three human lenses in vivo. Not correcting for distortion overestimated the anterior lens radius by 25% and the posterior lens radius by more than 65%. In vivo lens surfaces were fitted by biconicoids and Zernike polynomials after distortion correction. The anterior lens radii of curvature ranged from 10.27 to 14.14 mm, and the posterior lens radii of curvature ranged from 6.12 to 7.54 mm. Surface asphericities ranged from -0.04 to -1.96. The lens surfaces were well fitted by quadrics (with variation smaller than 2%, for 5-mm pupils), with low amounts of high order terms. Surface lens astigmatism was significant, with the anterior lens typically showing horizontal astigmatism ([Formula: see text] ranging from -11 to -1 µm) and the posterior lens showing vertical astigmatism ([Formula: see text] ranging from 6 to 10 µm).

  14. 21 CFR 886.3600 - Intraocular lens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens. 886.3600 Section 886.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3600 Intraocular lens. (a) Identification. An intraocular lens is a device made of materials...

  15. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus...

  16. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus for ...

  17. The Ultrawideband Leaky Lens Antenna

    NARCIS (Netherlands)

    Bruni, S.; Neto, A.; Marliani, F.

    2007-01-01

    A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design.

  18. A dual strategy for improving lithium storage performance, a case of Fe{sub 2}O{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xia; Xiao, Ying; Hu, Changwen; Cao, Minhua, E-mail: caomh@bit.edu.cn

    2014-11-15

    Graphical abstract: The α-Fe{sub 2}O{sub 3} nanoellipse with180–230 nm (edge length) and 140–170 nm (edge width) has been synthesize and tested as anode material for LIBs. The α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. - Highlights: • α-Fe{sub 2}O{sub 3} nanoellipses were fabricated by a simple hydrothermal method with glycine. • The elliptical α-Fe{sub 2}O{sub 3}-SA electrode exhibits enhanced lithium storage performance. • The reason for the enhanced performance of elliptical α-Fe{sub 2}O{sub 3}-SA was investigated. - Abstract: In this paper, we developed a dual strategy, the nanostructure engineering of active material and the proper choice of binder, to achieve excellent lithium storage performance of transition metal oxides. α-Fe{sub 2}O{sub 3} nanoellipses with a mean size of 180–230 nm (edge length) and 140–170 nm (edge width) were fabricated by a simple hydrothermal method in the presence of glycine. When tested as anode material for lithium ion batteries (LIBs), the α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. The capacity could be retained as high as 1164 mA h g{sup −1} at a current density of 100 mA g{sup −1} for over 60 cycles. Even cycled at high current densities of 2000–5000 mA g{sup −1}, high capacities of 443–628 mA h g{sup −1} can be achieved, whereas the electrode with the conventional poly(vinylidene fluoride) (PVDF) binder suffers from rapid capacity decay under the same test conditions.

  19. Estimation of the hybrid lens parameters through rigid gas permeable lens fitting

    OpenAIRE

    Hasani, Mohammadali; Hashemi, Hassan; Jafarzadehpur, Ebrahim; Yekta, Abbas Ali; Dadbin, Nooshin; khabazkhoob, Mehdi

    2016-01-01

    Purpose To estimate the fitting parameters of the hybrid contact lens in patients with corneal ectasia using the rigid gas permeable (RGP) lens. Methods Thirty-four eyes with corneal ectasia were evaluated in this study. The patients were examined once with the RGP lens and once with the hybrid contact lens. The relationship between the base curvature of the RGP and the vault of the hybrid lens and the correlation between their powers were analyzed. Results We found a linear relationship betw...

  20. Reduction of pasteurization temperature leads to lower bacterial outgrowth in pasteurized fluid milk during refrigerated storage: a case study.

    Science.gov (United States)

    Martin, N H; Ranieri, M L; Wiedmann, M; Boor, K J

    2012-01-01

    Bacterial numbers over refrigerated shelf-life were enumerated in high-temperature, short-time (HTST) commercially pasteurized fluid milk for 15 mo before and 15 mo after reducing pasteurization temperature from 79.4°C (175°F) [corrected] to 76.1°C (169°F). Total bacterial counts were measured in whole fat, 2% fat, and fat-free milk products on the day of processing as well as throughout refrigerated storage (6°C) at 7, 14, and 21 d postprocessing. Mean total bacterial counts were significantly lower immediately after processing as well as at 21 d postprocessing in samples pasteurized at 76.1°C versus samples pasteurized at 79.4°C. In addition to mean total bacterial counts, changes in bacterial numbers over time (i.e., bacterial growth) were analyzed and were lower during refrigerated storage of products pasteurized at the lower temperature. Lowering the pasteurization temperature for unflavored fluid milk processed in a commercial processing facility significantly reduced bacterial growth during refrigerated storage.

  1. Impact of Screening on Behavior During Storage and Cost of Ground Small-Diameter Pine Trees: A Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Erin Searcy; Brad D Blackwelder; Mark E Delwiche; Allison E Ray; Kevin L Kenney

    2011-10-01

    Whole comminuted trees are known to self-heat and undergo quality changes during storage. Trommel screening after grinding is a process that removes fines from the screened material and removes a large proportion of high-ash, high-nutrient material. In this study, the trade-off between an increase in preprocessing cost from trommel screening and an increase in quality of the screened material was examined. Fresh lodgepole pine (Pinus contorta) was comminuted using a drum grinder with a 10-cm screen, and the resulting material was distributed into separate fines and overs piles. A third pile of unscreened material, the unsorted pile, was also examined. The three piles exhibited different characteristics during a 6-week storage period. The overs pile was much slower to heat. The overs pile reached a maximum temperature of 56.88 degrees C, which was lower than the maximum reached by the other two piles (65.98 degrees C and 63.48 degrees C for the unsorted and fines, respectively). The overs also cooled faster and dried to a more uniform moisture content and had a lower ash content than the other two piles. Both piles of sorted material exhibited improved airflow and more drying than the unsorted material. Looking at supply system costs from preprocessing through in-feed into thermochemical conversion, this study found that trommel screening reduced system costs by over $3.50 per dry matter ton and stabilized material during storage.

  2. How to Characterize a Potential Site for CO2 Storage with Sparse Data Coverage – a Danish Onshore Site Case

    Directory of Open Access Journals (Sweden)

    Nielsen Carsten Møller

    2015-04-01

    Full Text Available The paper demonstrates how a potential site for CO2 storage can be evaluated up to a sufficient level of characterization for compiling a storage permit application, even if the site is only sparsely explored. The focus of the paper is on a risk driven characterization procedure. In the initial state of a site characterization process with sparse data coverage, the regional geological and stratigraphic understanding of the area of interest can help strengthen a first model construction for predictive modeling. Static and dynamic modeling in combination with a comprehensive risk assessment can guide the different elements needed to be evaluated for fulfilling a permit application. Several essential parameters must be evaluated; the storage capacity for the site must be acceptable for the project life of the operation, the trap configuration must be efficient to secure long term containment, the injectivity must be sufficient to secure a longstanding stable operation and finally a satisfactory and operational measuring strategy must be designed. The characterization procedure is demonstrated for a deep onshore aquifer in the northern part of Denmark, the Vedsted site. The site is an anticlinal structural closure in an Upper Triassic – Lower Jurassic sandstone formation at 1 800-1 900 m depth.

  3. Multifocal contact lens myopia control.

    Science.gov (United States)

    Walline, Jeffrey J; Greiner, Katie L; McVey, M Elizabeth; Jones-Jordan, Lisa A

    2013-11-01

    Previous studies on soft multifocal contact lens myopia control published in the peer-reviewed literature reported findings of noncommercial contact lenses worn for 1 year or less. This study sought to determine the progression of myopia and axial elongation of children fitted with commercially available distance center soft multifocal contact lenses for 2 years. Eight- to eleven-year-old children with -1.00 D to -6.00 D spherical component and less than 1.00 D astigmatism were fitted with soft multifocal contact lenses with a +2.00 D add (Proclear Multifocal "D"; CooperVision, Fairport, NY). They were age- and gender-matched to participants from a previous study who were fitted with single-vision contact lenses (1 Day Acuvue; Vistakon, Jacksonville, FL). A-scan ultrasound and cycloplegic autorefraction were performed at baseline, after 1 year, and after 2 years. Multilevel modeling was used to compare the rate of change of myopia and axial length between single-vision and soft multifocal contact lens wearers. Forty participants were fitted with soft multifocal contact lenses, and 13 did not contribute complete data (5 contributed 1 year of data). The adjusted mean ± standard error spherical equivalent progression of myopia at 2 years was -1.03 ± 0.06 D for the single-vision contact lens wearers and -0.51 ± 0.06 for the soft multifocal contact lens wearers (p < 0.0001). The adjusted mean axial elongation was 0.41 ± 0.03 and 0.29 ± 0.03 for the single-vision and soft multifocal contact lens wearers, respectively (p < 0.0016). Soft multifocal contact lens wear resulted in a 50% reduction in the progression of myopia and a 29% reduction in axial elongation during the 2-year treatment period compared to a historical control group. Results from this and other investigations indicate a need for a long-term randomized clinical trial to investigate the potential for soft multifocal contact lens myopia control.

  4. Compliance and hygiene behaviour among soft contact lens wearers in the Maldives.

    Science.gov (United States)

    Gyawali, Rajendra; Nestha Mohamed, Fathimath; Bist, Jeewanand; Kandel, Himal; Marasini, Sanjay; Khadka, Jyoti

    2014-01-01

    Significant levels of non-compliance and poor hygiene among contact lens wearers have been reported previously from different parts of the world. This survey aimed at identifying the scope of hygiene and non-compliant behaviour of soft contact lens wearers in the Maldives. Established soft lens wearers attending two eye clinics in Male' city, were interviewed in office or via telephone. A set of interviewer-administered questions was used to access the subjective response on compliance and hygiene behaviour (hand and lens case hygiene, water exposure, adherence to lens replacement schedule, dozing and overnight wear, awareness of aftercare visits and reuse of disinfecting solution). Participants were also asked to rate themselves as a contact lens user based on their perceived compliance and hygiene practices. Out of 107 participants, 79 (74.8 per cent) were interviewed in the office and the rest via telephone. The majority of lens wearers were female, office workers and students, with a mean age of 20.64 ± 4.4 years. Mean duration of lens wear was 28.04 ± 8.36 months. Most of them were using spherical lenses (86.9 per cent) on a daily wear basis (96.3 per cent). Major reported forms of non-compliance were poor hand hygiene (60.7 per cent), lack of aftercare awareness (39.3 per cent), water exposure (35.5 per cent) and over-use of lenses (24.3 per cent). While females were more likely to overuse their lenses than males (p hygienic behaviour. A significant number of Maldivian contact lens wearers exhibited poor levels of hygiene and compliance with contact lenses and lens care systems. An effective educational reinforcement strategy needs to be developed to modify lens wearers' non-compliance. © 2013 The Authors. Clinical and Experimental Optometry © 2013 Optometrists Association Australia.

  5. Elastic constants of the human lens capsule.

    Science.gov (United States)

    Fisher, R F

    1969-03-01

    1. A technique is described whereby the elasticity of the human lens capsule has been determined at birth and throughout life. This technique requires three separate determinations: (a) thickness; (b) stress and strain; (c) Poisson's ratio; (a) the capsule was clamped between accurately perforated ground glass plates and its thickness determined by noting the change in depth of focus between Latex spherules adhering to its upper and lower surfaces; (b) the undisturbed capsule was then placed in a specially designed glass distension apparatus and the relationship between volume and pressure recorded when it was distended with isotonic saline. The permeability of the capsule was also measured; (c) in some cases Poisson's ratio was determined by measuring the change of thickness of the capsule and the height to which it rose when distended with isotonic saline at different pressures. An apparatus was designed for this purpose.2. The average thickness of the anterior capsule increases from birth until about the 60th year but thereafter it decreases slightly.3. Poisson's ratio was about 0.47 for both cat and human capsule, and no significant variations with age in human capsule could be detected.4. Corrected volume pressure curves obeyed Hook's law almost to the point of capsule rupture.5. In childhood Young's Modulus of elasticity is about 6 x 10(7) dyn/cm(2) and decreases to 3 x 10(7) dyn/cm(2) at 60 and 1.5 x 10(7) dyn/cm(2) in extreme old age.6. The ultimate tensile stress was 2.3 x 10(7) dyn/cm(2) in young capsules and 0.7 x 10(7) dyn/cm(2) in old ones. The maximum percentage elongation was 29 per cent and independent of age.7. The implications of these findings are discussed in relation to(a) the mechanical properties of the lens capsule;(b) the ageing of the lens capsule and basement membranes; and(c) the decrease in elasticity of the lens capsule as a cause of presbyopia.

  6. Spontaneous resorption of sub-retinal cortical lens material

    Directory of Open Access Journals (Sweden)

    Salil S Gadkari

    2014-01-01

    Full Text Available We report a rare case of retained sub-retinal cortical material, which underwent spontaneous resorption. Patient presented with a left eye traumatic retinal detachment with a large retinal tear and posteriorly dislocated cataractous lens. Vitrectomy, lensectomy, silicone oil injection, and endolaser were performed. A good visual result was achieved. The report draws attention to this condition and highlights possible technique for minimizing risk of this complication in similar cases.

  7. Lens stem cells may reside outside the lens capsule: an hypothesis

    Directory of Open Access Journals (Sweden)

    Meyer Rita A

    2007-06-01

    Full Text Available Abstract In this paper, we consider the ocular lens in the context of contemporary developments in biological ideas. We attempt to reconcile lens biology with stem cell concepts and a dearth of lens tumors. Historically, the lens has been viewed as a closed system, in which cells at the periphery of the lens epithelium differentiate into fiber cells. Theoretical considerations led us to question whether the intracapsular lens is indeed self-contained. Since stem cells generate tumors and the lens does not naturally develop tumors, we reasoned that lens stem cells may not be present within the capsule. We hypothesize that lens stem cells reside outside the lens capsule, in the nearby ciliary body. Our ideas challenge the existing lens biology paradigm. We begin our discussion with lens background information, in order to describe our lens stem cell hypothesis in the context of published data. Then we present the ciliary body as a possible source for lens stem cells, and conclude by comparing the ocular lens with the corneal epithelium.

  8. Distributed Storage Allocation Problems

    OpenAIRE

    Leong, Derek; Dimakis, Alexandros G.; Ho, Tracey

    2009-01-01

    We investigate the problem of using several storage nodes to store a data object, subject to an aggregate storage budget or redundancy constraint. It is challenging to find the optimal allocation that maximizes the probability of successful recovery by the data collector because of the large space of possible symmetric and nonsymmetric allocations, and the nonconvexity of the problem. For the special case of probability-l recovery, we show that the optimal allocatio...

  9. Geological exploration for a high-temperature aquifer thermal energy storage (HT-ATES) system: a case study from Oman

    Science.gov (United States)

    Winterleitner, Gerd; Schütz, Felina; Huenges, Ernst

    2017-04-01

    A collaborative research programme between the German Research Centre for Geoscience, Potsdam (GFZ) and The Research Council of Oman (TRC) is underway, which aims to develop and implement an innovative concept of a sustainable thermally driven cooling system in combination with a HT-ATES in northern Oman. The system will use an absorption chiller for cold supply, which nominally requires water of around 100°C as energy source. Solar collectors will provide this thermal energy and energy surpluses during daytimes will be stored to ensure a continuous operation of the cooling system. An integral part of this project is, therefore, the development of an efficient HT-ATES (100°C), which is based on temporary storage and recovery of thermal energy through hot water injection in subsurface aquifer horizons. Thus, an accurate thermal and fluid flow characterisation of potential reservoir horizons is essential to ensure optimal efficiency of the cooling system. The study area is located in the Al Khwad area, approximately 40 km to the west of Muscat. The area is characterised by a thick Cenozoic mixed carbonate-siliciclastic sedimentary succession, containing at least 3 aquifer horizons. We use a multidisciplinary approach for the initial ATES exploration and development phase, including traditional geological fieldwork dovetailed with virtual outcrop geology, thin-section analyses, geological modelling and reservoir fluid flow forecasting analyses. Our first results indicate two potential storage horizons: (1) a Miocene-aged clastic-dominated alluvial fan system and (2) an Eocene carbonate-dominated sequence. The alluvial fan system is characterised by a more than 300 m thick, coarse-clastic succession of coalesced individual fans. Thermal and hydraulic parameters are favourable for gravel and sandstone intervals but reservoir architecture is complex due to multiple generations of interconnecting fans with highly heterogeneous facies distributions. The Eocene carbonates

  10. Modern lens antennas for communications engineering

    CERN Document Server

    Thornton, John

    2012-01-01

    The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas.  Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc.  The major advantages of lens antennas are na

  11. Suspension and optical properties of the crystalline lens in the eyes of basal vertebrates.

    Science.gov (United States)

    Kröger, Ronald H H; Gustafsson, Ola S E; Tuminaite, Inga

    2014-06-01

    We have investigated the apparatus suspending the crystalline lens in the eyes of basal vertebrates. Data are presented for Holocephali (Chondrichthyes) and the actinopterygians Polypteriformes, Polyodontidae (Acipenseriformes), Lepisosteiformes, Amiiformes, and one teleost species, the banded archerfish (Toxotes jaculatrix). We also studied the optical properties of the lens in Polypteriformes, Lepisosteiformes, and the archerfish. Together with previously published results, our findings show that there are three basic types of lens suspension in vertebrates. These are i) a rotationally symmetric suspension (Petromyzontida, lampreys; Ceratodontiformes, lungfishes; Tetrapoda), ii) a suspension with a dorso-ventral axis of symmetry and a ventral papilla (all Chondrichthyes and Acipenseriformes), and iii) an asymmetric suspension with a ventral muscle and a varying number of ligaments (all Actinopterygii except for Acipenseriformes). Large eyes with presumably high spatial resolution have evolved in all groups. Multifocal lenses creating well-focused color images are also present in all groups studied. Stable and exact positioning of the lens, in many cases in combination with accommodative changes in lens position or shape, is achieved by all three types of lens suspension. It is somewhat surprising that lens suspensions are strikingly similar in Chondrichthyes and Acipenseriformes (Actinopterygii), while the suspension apparatus in Polypteriformes, usually being regarded as an actinopterygian group more basal than Acipenseriformes, are considerably more teleostean-like. This study completes a series of investigations on lens suspensions in nontetrapod vertebrates, covering all major groups except for the rare and highly derived coelacanths.

  12. Biofilm formation of Achromobacter xylosoxidans on contact lens.

    Science.gov (United States)

    Konstantinović, Neda; Ćirković, Ivana; Đukić, Slobodanka; Marić, Vesna; Božić, Dragana D

    2017-02-20

    Achromobacter spp. may contaminate lenses, lens cases, and contact lens solutions and cause ocular infections. The aim of this study was to investigate the possibility of isolated strain of Achromobacter xylosoxidans to form biofilm on the surface of soft contact lenses (CL), to quantify the production of the formed biofilm, and compare it with the reference strains (Pseudomonas aeruginosa, Staphylococcus aureus, and Haemophilus influenzae). Bacterial strain isolated from one contact lens case was identified as A. xylosoxidans using Vitek2 Automated System. Biofilm forming capacity of isolated strain of A. xylosoxidans and reference strains of P. aeruginosa, S. aureus, and H. influenzae on soft CL were analyzed by commonly used microtitre plate method. Our results showed that isolated strain of A. xylosoxidans was capable to form biofilm on the surface of soft contact lens. A. xylosoxidans was strong biofilm producer while all examined reference strains were moderate biofilm producers. A. xylosoxidans appears to be superior biofilm producer on soft CL compared to reference strains.

  13. Conjunctival impression cytology in contact lens wearers.

    Directory of Open Access Journals (Sweden)

    Simon Priya

    2002-01-01

    Full Text Available PURPOSE: To evaluate the cytological changes in conjunctiva following regular contact lens wear and to determine the correlation, if any, between severity of cytological alteration and symptoms related to contact lens wear. METHODS: One hundred eyes (50 normal asymptomatic subjects who served as a control group were studied by conjunctival impression cytology (CIC. These subjects were fitted with rigid gas permeable (RGP or soft contact lenses and were followed up at the end of 3 and 6 months. At each follow-up visit the CIC was repeated. A filter paper with the impression specimen was stained with periodic acid schiff (PAS and haematoxylin stain to study goblet cell loss. Papanicolaou stain was done to study squamous metaplasia. The cytological changes were graded using the system described by Natadisastra et al. RESULTS: Severity of cytological changes increased with the duration of contact lens wear (P = 0.00001. At the end of 6 months, 60% of symptomatic eyes wearing soft contact lens and RGP lens showed abnormal CIC changes. None of the asymptomatic RGP contact lens wearing eyes showed abnormal CIC changes whereas 33.4% of the asymptomatic soft contact lens wearing eyes showed abnormal CIC changes (P = 0.033. Epithelial changes occurred within 3-6 months of contact lens fitting. CONCLUSION: Severity of cytological changes increased with duration of lens wear (P = 0.00001. Prevalence and severity of cytological alteration is more in symptomatic contact lens wearers. Soft contact lens wearers although asymptomatic showed severe CIC changes.

  14. Effect of soft contact lens curvature on dry eye of flight attendants

    Directory of Open Access Journals (Sweden)

    Chang-Liang Meng

    2014-10-01

    Full Text Available AIM: To discuss the effect of wearing customized curvature soft corneal contact lens to dry eye degree of flight attendants.METHODS: Eighty cases(160 eyesof flight attendants from China Southern were divided into two groups: control group 40 cases(80 eyeswearing ready-made Bausch soft corneal contact lens(curvature 8.4; the experiment group 40 cases(80 eyes, wearing Bausch soft corneal contact lens with customized curvature. Tear break-up time(BUT, Schirmer Ⅰ test(SⅠtand fluorescein(FLstaining were as dry eye evaluation index. The results was statistically analyzed.RESULTS: BUT, SⅠt average shortening value of the experimental group were less than that of the control group, there was statistical significance(PPCONCLUSION: Wearing customized curvature soft corneal contact lens can prevent the flight dry eye more effectively than fixed curvature product.

  15. Energy storage

    CERN Document Server

    Brunet, Yves

    2013-01-01

    Energy storage examines different applications such as electric power generation, transmission and distribution systems, pulsed systems, transportation, buildings and mobile applications. For each of these applications, proper energy storage technologies are foreseen, with their advantages, disadvantages and limits. As electricity cannot be stored cheaply in large quantities, energy has to be stored in another form (chemical, thermal, electromagnetic, mechanical) and then converted back into electric power and/or energy using conversion systems. Most of the storage technologies are examined: b

  16. Exploring trade-offs between carbon storage, yield and biodiversity in analog forestry. A case study in the Peruvian Amazon

    Science.gov (United States)

    Recanati, F.; Saini, M.; Guariso, G.; Melia, P.

    2016-12-01

    Creation and management of agro-ecosystems can considerably influence the greenhouse gas exchange between terrestrial ecosystems and atmosphere. This is especially evident for tropical areas, where the expansion of agricultural lands for monoculture is among the main causes of deforestation and consequent CO2 emissions. In these contexts, agro-ecological approaches, such as analog forestry, seem promising alternatives to intensive ones. Analog forestry is usually created for reforestation purposes through the combination of ecological succession and architecture of natural forests (i.e., inclusion of species from shrubs to higher trees). Besides provisioning a variety of food and medicinal products, they provide high levels of biodiversity (compared to other agricultural practices) and important ecosystem services, like carbon storage. Given the complexity of such agro-ecosystems, this study aims to estimate the quantity of carbon that can be stored in an analog forest as a function of its species composition. Consequently, trade-offs between performances in terms of carbon storage, productivity and biodiversity are explored. The analysis focuses on the Peruvian region of Madre de Dios, where native forest and its biodiversity is threatened by intensive agriculture. To quantify plant above- and belowground biomass and the related carbon content, we feed appropriate allometric models with plant morphological information gathered in the field. Relying on our database of productive plant species suitable for the region, we formulate an optimization problem aimed at the selection of plant population under different constraint systems. The latter are defined according to possible farmers' preferences (e.g., average profitability or multi-functionality). The analysis refers to the farm-scale and is performed over medium-term horizon (i.e., 40 years), in order to take into account important plant dynamics (species growth and the evolution of shade interaction

  17. Materials Data Infrastructure: A Case Study of the Citrination Platform to Examine Data Import, Storage, and Access

    Science.gov (United States)

    O'Mara, Jordan; Meredig, Bryce; Michel, Kyle

    2016-08-01

    Considerations are presented around the design of a materials data infrastructure including import of structured and unstructured data, storage of that data for archival and retrieval, and access to that data through programmatic and graphical interfaces. In particular, the choices around technologies used in such an infrastructure, the benefits and drawbacks of those technologies, and their impact on the experience of users of that system are presented. The Citrination platform is used as an example of a materials data infrastructure and the choices made around architecture are discussed.

  18. Grid-Level Application of Electrical Energy Storage: Example Use Cases in the United States and China

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yang, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhou, Shengru [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Caixia [State Grid Corporation of China; Lei, Xuejiao [State Grid Corporation of China; Li, Qionghui [State Grid Corporation of China; Jiang, Liping [State Grid Corporation of China

    2017-08-16

    Electrical energy storage (EES) systems are expected to play an increasing role in helping the United States and China-the world's largest economies with the two largest power systems-meet the challenges of integrating more variable renewable resources and enhancing the reliability of power systems by improving the operating capabilities of the electric grid. EES systems are becoming integral components of a resilient and efficient grid through a diverse set of applications that include energy management, load shifting, frequency regulation, grid stabilization, and voltage support.

  19. Vitreous Humor Changes Expression of Iron-Handling Proteins in Lens Epithelial Cells

    Science.gov (United States)

    Goralska, Malgorzata; Fleisher, Lloyd N.; McGahan, M. Christine

    2017-01-01

    Purpose In humans, vitrectomy is associated with development of nuclear cataracts. Iron catalyzes free radical formation causing oxidative damage, which is implicated in cataract formation. This study was designed to determine if vitreous humor, which can initiate differentiation of lens epithelial cells, would have an effect on iron-handling proteins. Methods Cultured canine lens epithelial cells were treated with collected canine vitreous humor. Lysates of treated and control cells were separated by SDS-PAGE. Ferritin H- and L-chains, transferrin receptor 1, and aquaporin 0 were immunodetected and quantitated with specific antibodies. Morphologic changes in treated cells were assessed. Results Treatment of lens epithelial cells with a 33% (vol/vol) solution of vitreous humor changed the morphology of lens cells and induced expression of aquaporin 0, a marker of fiber cell differentiation that was undetectable in control cells. Treatment did not modify the size of iron-handling proteins but significantly increased content of ferritin from 2.9- to 8.8-fold over control and decreased levels of transferrin receptor by 37% to 59%. Conclusions Vitreous humor may significantly limit iron uptake by transferrin/transferrin receptor pathway, and by increasing ferritin levels could profoundly increase the iron-storage capacity of ferritin in lens cells. Vitreous humor may play a significant protective role against iron-catalyzed oxidative damage of lens epithelial cells and therefore in the formation of cataracts. PMID:28245299

  20. The Impact of Storage Times of Museum Insect Specimens on PCR Success: Case Study on Moth Collections in Indonesia

    Directory of Open Access Journals (Sweden)

    HARI SUTRISNO

    2012-06-01

    Full Text Available Museum specimens are vast repositories of genetic information of interests to biological researchers. Since a new method in DNA extraction, a non destructive method, has been reported to be successful in extracting DNA of museum specimens even fossils without any morphological damages, using museum specimens as resources of genetic information for molecular studies is becoming popular recently. However, the PCR success depends on the quality of the specimens. To evaluate the impact of the storage times of museum specimens on PCR success,we conducted DNA extraction of 14 dry museum specimens of the moths collected from 1992 to 2010 by using a non destructive method. The results showed that the DNA specimens museum were fragmented into various sizes (100-1000 bp depend on the storage times. On the other hand, fresh specimens which were preserved withinabsolute ethanol were almost not fragmented. The specimens of < 6 years old (2005-2010 succeed to amplify in 650 bp amplicon but for some specimens of 7 years old (2 of 3 specimens resulted in a very weak amplification. These specimens, however, were able to amplify strongly in 300 bp amplicon. The results also showed that specimens of 1-19 years old were success to amplify in 100 bp amplicon.

  1. Well selection in depleted oil and gas fields for a safe CO2 storage practice: A case study from Malaysia

    Directory of Open Access Journals (Sweden)

    Arshad Raza

    2017-03-01

    Full Text Available Carbon capture and sequestration technology is recognized as a successful approach taken to mitigate the amount of greenhouse gases released into the atmosphere. However, having a successful storage practice requires wise selection of suitable wells in depleted oil or gas fields to reduce the risk of leakage and contamination of subsurface resources. The aim of this paper is to present a guideline which can be followed to provide a better understanding of sophisticated wells chosen for injection and storage practices. Reviewing recent studies carried out on different aspects of geosequestration indicated that the fracture pressure of seals and borehole conditions such as cement-sheath integrity, distance from faults and fractures together with the depth of wells are important parameters, which should be part of the analysis for well selection in depleted reservoirs. A workflow was then designed covering these aspects and it was applied to a depleted gas field in Malaysia. The results obtained indicated that Well B in the field may have the potential of being a suitable conduit for injection. Although more studies are required to consider other aspects of well selections, it is recommended to employ the formation integrity analysis as part of the caprock assessment before making any decisions.

  2. A case of perioperative glucose control by using an artificial pancreas in a patient with glycogen storage disease.

    Science.gov (United States)

    Yatabe, Tomoaki; Nakamura, Ryu; Kitagawa, Hiroyuki; Munekage, Masaya; Hanazaki, Kazuhiro

    2016-03-01

    A 57-year-old woman was diagnosed with type I glycogen storage disease in her twenties. She had undergone hepatectomy under general anesthesia with epidural anesthesia. Fifty minutes after the induction of anesthesia, a 20-gauge venous catheter was inserted in the patient's right hand, and an artificial pancreas (STG-55, Nikkiso Co., Tokyo, Japan) was connected for continuous glucose monitoring and automatic glucose control. Insulin was infused when the blood glucose level reached 120 mg/dL or higher, and glucose was infused when the level fell to 100 mg/dL or lower. After the Pringle maneuver, the blood glucose level increased, and insulin was administered automatically via an artificial pancreas. Hypoglycemia did not occur during the operation. After total parenteral nutrition was started in the intensive care unit (ICU), the blood glucose level increased, and the artificial pancreas controlled the blood glucose level through automatic insulin administration. Thirty-four hours after admission to the ICU, the artificial pancreas was removed because the blood sampling failed. After the removal of the artificial pancreas, blood glucose level was measured every 2 h until extubation. During the ICU stay, hypoglycemia never occurred, with the average blood glucose level being 144 mg/dL. In conclusion, the use of an artificial pancreas for perioperative blood glucose management in a patient with glycogen storage disease had the beneficial effect of enabling the management of blood glucose levels without hypoglycemia.

  3. Generalized multi-plane gravitational lensing: time delays, recursive lens equation, and the mass-sheet transformation

    CERN Document Server

    Schneider, Peter

    2014-01-01

    We consider several aspects of the generalized multi-plane gravitational lens theory, in which light rays from a distant source are affected by several main deflectors, and in addition by the tidal gravitational field of the large-scale matter distribution in the Universe when propagating between the main deflectors. Specifically, we derive a simple expression for the time-delay function in this case, making use of the general formalism for treating light propagation in inhomogeneous spacetimes which leads to the characterization of distance matrices between main lens planes. Applying Fermat's principle, an alternative form of the corresponding lens equation is derived, which connects the impact vectors in three consecutive main lens planes, and we show that this form of the lens equation is equivalent to the more standard one. For this, some general relations for cosmological distance matrices are derived. The generalized multi-plane lens situation admits a generalized mass-sheet transformation, which corres...

  4. Surgical Management of a Patient with Anterior Megalophthalmos, Lens Subluxation, and a High Risk of Retinal Detachment

    Science.gov (United States)

    Esteve, María Carmen Guixeres; Pardo Saiz, Augusto Octavio; Martínez-Costa, Lucía; Dorta, Samuel González-Ocampo; Solana, Pedro Sanz

    2017-01-01

    The early development of lens opacities and lens subluxation are the most common causes of vision loss in patients with anterior megalophthalmos (AM). Cataract surgery in such patients is challenging, however, because of anatomical abnormalities. Intraocular lens dislocation is the most common postoperative complication. Patients with AM also seem to be affected by a type of vitreoretinopathy that predisposes them to retinal detachment. We here present the case of a 36-year-old man with bilateral AM misdiagnosed as simple megalocornea. He had a history of amaurosis in the right eye due to retinal detachment. He presented with vision loss in the left eye due to lens subluxation. Following the removal of the subluxated lens, it was deemed necessary to perform a vitrectomy in order to prevent retinal detachment. Seven months after surgery, an Artisan® Aphakia iris-claw lens was implanted in the anterior chamber. Fifteen months of follow-up data are provided. PMID:28203198

  5. A Fully Integrated RF-Powered Contact Lens With a Single Element Display.

    Science.gov (United States)

    Pandey, J; Yu-Te Liao; Lingley, Andrew; Mirjalili, R; Parviz, B; Otis, B

    2010-12-01

    We present progress toward a wirelessly-powered active contact lens comprised of a transparent polymer substrate, loop antenna, power harvesting IC, and micro-LED. The fully integrated radio power harvesting and power management system was fabricated in a 0.13 μm CMOS process with a total die area of 0.2 mm(2). It utilizes a small on-chip capacitor for energy storage to light up a micro-LED pixel. We have demonstrated wireless power transfer at 10 cm distance using the custom IC and on-lens antenna.

  6. Experimental studies on PCM filled Flat Plate Solar Water Heater without and with Fresnel lens glazing

    Directory of Open Access Journals (Sweden)

    R. Sivakumar

    2016-07-01

    Full Text Available Flat Plate Solar Water Heater (FPSWH is commonly used to harvest solar energy. Solar concentration techniques help to achieve higher temperatures of energy. The aim of this article is to compare the performance of a Fresnel lens glazed Flat Plate Solar Water Heater with Phase Change Material (PCM with that provided with an ordinary glazing. The effect of solar concentration using Fresnel lens on energy storage in PCM and heat gained by water are studied and compared with that having an ordinary glazing. Experiments showed 47% improvements in the heat gained by water.

  7. Study on Titanium Nitride Film Modified for Intraocular Lens

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Objective:To study the characteristics of the intraocular lens using ion beam sputtering depositing titanium nitride thin film on the intraocular lens(IOLs).Methods:To deposite titanium nitride thin film on the top of intraocular lens by ion beam sputtering depositing.We analyzed the surface morphology of intraocular lens through SEM and AFM.We detected intraocular lens resolution through the measurement of intraocular lens.Biocompatibility of intraocular lens is preliminary evaluated in this test.Results:T...

  8. Impact of contact lens materials on multipurpose contact lens solution disinfection activity against Fusarium solani.

    Science.gov (United States)

    Clavet, Charles R; Chaput, Maria P; Silverman, Matthew D; Striplin, Megan; Shoff, Megan E; Lucas, Anne D; Hitchins, Victoria M; Eydelman, Malvina B

    2012-11-01

    To investigate the effects of eight different soft contact lenses on disinfection efficacy of a multipurpose solution (MPS) containing polyhexamethylene biguanide (PHMB) against Fusarium solani. Six silicone hydrogel lenses (galyfilcon A, senofilcon A, comfilcon A, enfilcon A, balafilcon A, and lotrifilcon B) and two conventional hydrogel lenses (polymacon and etafilcon A) were placed in polypropylene lens cases filled with MPS containing 0.0001% PHMB and soaked for 6, 12, 24, 72, and 168 hours. After each interval, depleted MPS from lens cases were removed and assayed for activity against F. solani according to International Organization for Standardization (ISO) 14729 stand-alone procedure. A portion was aliquoted for chemical analysis. Soaking etafilcon A, balafilcon A, and polymacon lenses for 6 hours reduced the concentration of PHMB in MPS by more than half the stated labeled concentration, with concentrations below the limit of detection for etafilcon A-depleted and balafilcon A-depleted solutions after 12 and 72 hours of soaking, respectively. Except for comfilcon A-depleted solutions, all others failed to consistently obtain one log reduction of F. solani. The solutions soaked with etafilcon A, balafilcon A, and polymacon lenses for 24 hours or more lost all or almost all fungicidal activity against F. solani. Over time, the disinfectant uptake by some lenses can significantly reduce the PHMB concentration and the fungicidal activity of the MPS against F. solani. Current ISO methodology does not address the reduction in microbiocidal efficacy when lenses are soaked in MPS. The ISO committee should consider adding "soaking experiments" to quantify the effect that contact lens materials have on the performance of MPSs.

  9. Lens Coupled Quantum Cascade Laser

    Science.gov (United States)

    Hu, Qing (Inventor); Lee, Alan Wei Min (Inventor)

    2013-01-01

    Terahertz quantum cascade (QC) devices are disclosed that can operate, e.g., in a range of about 1 THz to about 10 THz. In some embodiments, QC lasers are disclosed in which an optical element (e.g., a lens) is coupled to an output facet of the laser's active region to enhance coupling of the lasing radiation from the active region to an external environment. In other embodiments, terahertz amplifier and tunable terahertz QC lasers are disclosed.

  10. Fresnel Lens with Embedded Vortices

    Directory of Open Access Journals (Sweden)

    Sunil Vyas

    2012-01-01

    Full Text Available Vortices of different charges are embedded in a wavefront that has quadratic phase variation, and the intensity distribution near the focal plane is studied. This method may be useful in realizing complicated beam profiles. We have experimentally demonstrated the generation of vortex arrays having integer as well as fractional topological charges that produce different intensity profiles at the focal plane. The phase variation realized on a spatial light modulator (SLM acts as a Fresnel lens with embedded vortices.

  11. Aflatoxins & Safe Storage

    Directory of Open Access Journals (Sweden)

    Philippe eVillers

    2014-04-01

    Full Text Available The paper examines both field experience and research on the prevention of the exponential growth of aflatoxins during multi-month post harvest storage in hot, humid countries. The approach described is the application of modern safe storage methods using flexible, Ultra Hermetic™ structures that create an unbreatheable atmosphere through insect and microorganism respiration alone, without use of chemicals, fumigants, or pumps. Laboratory and field data are cited and specific examples are given describing the uses of Ultra Hermetic storage to prevent the growth of aflatoxins with their significant public health consequences. Also discussed is the presently limited quantitative information on the relative occurrence of excessive levels of aflatoxin (>20 ppb before versus after multi-month storage of such crops as maize, rice and peanuts when under high humidity, high temperature conditions and, consequently, the need for further research to determine the frequency at which excessive aflatoxin levels are reached in the field versus after months of post-harvest storage. The significant work being done to reduce aflatoxin levels in the field is mentioned, as well as its probable implications on post harvest storage. Also described is why, with some crops such as peanuts, using Ultra Hermetic storage may require injection of carbon dioxide or use of an oxygen absorber as an accelerant. The case of peanuts is discussed and experimental data is described.

  12. Water storage capacity of the natural river valley - how sedge communities influence it. Case study of Upper Biebrza Basin (Poland) based on ALS and TLS data

    Science.gov (United States)

    Brach, Marcin; Chormański, Jarosław

    2014-05-01

    The exact determination of water storage capacity in river valley is an important issue for hydrologists, ecologist and flood modellers. In case of natural river valley, the dense and complexity vegetation of the natural ecosystems can influence the proper identification of the water storage. Methods considered to be sufficient in other cases (urbanized, agricultural) may not produce correct results. Sedge communities in natural river valleys form characteristic tussocks, built from the species roots, other organic material and silt or mud. They are formed due to partial flooding during the inundation, so the plants can survive in hard, anaerobic conditions. They can growth even up to 0.5 meters, which is not so visible due to very dense vegetation in the valleys. These tussocks form a microtopography or a river valley. Currently, the most commonly used technology to register the terrain topography is an Airborne Laser Scanning (ALS), but in the case of the tussocks and the dense vegetation it generates high errors on elevation in the areas of the sedges (Carex appropinquata). This study concerns the Upper Biebrza Valley which is located in the northeastern Poland. For purpose of our work we used Terrestrial Laser Scanner (TLS) technology to determine microtopography of selected fields. Before measurements, the green part of the sedge was cut in selected measurements fields. It make possible to register only tussocks shape. Next, step was collection of the airborne ALS data of the valley with density of 8 points/sq m. The experimental field was divided on two sub-fields: one was cut and scanned using TLS before ALS collection, while the second after. Data collected as ALS and the TLS were then compared. The accuracy of the ALS data depends on the land cover of an area, while TLS accuracy is around 2 millimeters (when georeferenced it depends on the accuracy of reference points - in our case it was made using GPS RTK which gave us accuracy of few centimeters). The

  13. Intraocular lens employed for cataract surgery

    Science.gov (United States)

    Roszkowska, A. M.; Torrisi, L.

    2014-04-01

    The aim of this paper is to illustrate the techniques of cataract surgery with implantation of intraocular lenses and some physical properties of the used materials. The new technology, coupled with extensive experience and the studied cases, permits to increase the standardization and accuracy of the engravings, by reducing the use and handling of surgical instruments inside the eye. At present it is possible to replace the cataract with crystalline lenses based on biopolymers such as PMMA, silicone, acrylic hydrophilic and hydrophobic acrylic. These materials are increasingly able to replace the natural lens and to ensure the fully functional of the eye. The role of femtosecond lasers in cataract surgery, to assist or replace several aspects of the manual cataract surgery, are discussed.

  14. Contact lens wear is intrinsically inflammatory.

    Science.gov (United States)

    Efron, Nathan

    2017-01-01

    Eye-care practitioners typically associate ocular inflammation during contact lens wear with serious complications such as microbial keratitis; however, more subtle mechanisms may be at play. This paper tests the notion that contact lens wear is intrinsically inflammatory by exploring whether uncomplicated contact lens wear meets the classical, clinical definition of inflammation - rubor (redness), calor (heat), tumor (swelling), dolor (pain) and functio laesa (loss of function) - as well as the contemporary, sub-clinical definition of inflammation (cellular and biochemical reactions). It is demonstrated that all of these clinical and sub-clinical criteria are met with hydrogel lens wear and most are met with silicone hydrogel lens wear, indicating that uncomplicated contact lens wear is intrinsically inflammatory. Consideration of both traditional and contemporary thinking about the role of inflammation in the human body leads to the perhaps surprising conclusion that the chronic, low grade, sub-clinical inflammatory status of the anterior eye during contact lens wear, which may be termed 'para-inflammation', is a positive, protective phenomenon, whereby up-regulation of the immune system, in a non-damaging way, maintains the eye in a state of 'heightened alert', ready to ward off any extrinsic noxious challenge. Characterisation of this inflammatory status may lead to the development of lens engineering or pharmacological strategies to modulate contact lens-induced inflammation, so as to render lens wear more safe and comfortable. © 2016 Optometry Australia.

  15. Probe Storage

    NARCIS (Netherlands)

    Gemelli, Marcellino; Abelmann, Leon; Engelen, Johan B.C.; Khatib, Mohammed G.; Koelmans, Wabe W.; Zaboronski, Olog; Campardo, Giovanni; Tiziani, Federico; Laculo, Massimo

    2011-01-01

    This chapter gives an overview of probe-based data storage research over the last three decades, encompassing all aspects of a probe recording system. Following the division found in all mechanically addressed storage systems, the different subsystems (media, read/write heads, positioning, data chan

  16. Atomic storage

    CERN Multimedia

    Ricadela, A

    2003-01-01

    IBM is supplying CERN, the European Organization for Nuclear Research, with its Storage Tank file system virtualization software, 20 terabytes of storage capacity, and services under a three-year deal to build computer systems that will support the Large Hadron Collider accelerator (1 paragraph).

  17. Whole Watershed Management to Maximize Total Water Storage: Case Study of the American-Cosumnes River Basin

    Science.gov (United States)

    Goharian, E.; Gailey, R.; Medellin-Azuara, J.; Maples, S.; Adams, L. E.; Sandoval Solis, S.; Fogg, G. E.; Dahlke, H. E.; Harter, T.; Lund, J. R.

    2016-12-01

    Drought and unrelenting water demands by urban, agricultural and ecological entities present a need to manage and perhaps maximize all the major stores of water, including mountain snowpack and soil moisture, surface reservoirs, and groundwater reservoirs for the future. During drought, the over-exploitations of groundwater, which supplies up to 60% of California's agricultural water demand, has caused serious overdraft in many areas. Moreover, owing to climate change, faster and earlier snowmelt in Mediterranean climate systems such as California dictates that less water can be stored in reservoirs. If we are to substantially compensate for this loss of stored water without drastically cutting back water supply, a new era of radically increased groundwater recharge will be needed. Managed aquifer recharge (MAR) has become a common and fast-growing management option, especially in areas with high water availability variation intra- and inter-annually. Enhancing the recharge by the use of peak runoff requires integrated river basin management to improve prospects to downstream users and ecology. This study implements a quantitative approach to assess the physical and economic feasibility of MAR for American-Cosumnes River basin, CA. For this purpose, two scenarios are considered, the pre-development condition which is represented by unimpaired flows, and the other one in which available peak flow releases from Folsom reservoir derived from the CalSim II hydrologic simulation model will be employed to estimated available water for recharge. Preliminary results show peak flows during winter (Dec-Feb) and extended winter (Nov-Mar) from the American River flow can be captured within a range of 64,000 to 198,000 af/month through the Folsom South Canal for recharge. Changes in groundwater storage are estimated by using California Central Valley Groundwater-Surface Water Simulation Model (C2VSim). Results show increasing groundwater recharge benefits not only the regional

  18. In-the-bag decentration of an intraocular lens in a patient with a tendency to hypertrophic scarring

    Science.gov (United States)

    Joshi, Rajesh Subhash

    2016-01-01

    Summary We report a case of rapid anterior lens capsular contraction leading to decentration of a hydrophilic acrylic lens with stiff haptics (Rayner design). To our knowledge, this is the first report to investigate early capsular contraction with folding of the haptic over the optic in a patient with a tendency toward hypertrophic scar formation. PMID:27330480

  19. Ontogeny and localization of gamma-crystallins in Rana temporaria, Ambystoma mexicanum and Pleurodeles waltlii normal lens development

    NARCIS (Netherlands)

    Brahma, S.K.; McDevitt, David S.

    1974-01-01

    Rana pipiens lens γ-crystallin antibodies were used in the indirect immunofluorescence staining method to investigate the role of γ-crystallins in the normal lens development of the amphibians Rana temporaria, Ambystoma mexicanum and Pleurodeles waltlii Michah. In each case, the fluorescence was fir

  20. Ontogeny and localization of gamma-crystallins in Rana temporaria, Ambystoma mexicanum and Pleurodeles waltlii normal lens development

    NARCIS (Netherlands)

    Brahma, S.K.; McDevitt, David S.

    1974-01-01

    Rana pipiens lens γ-crystallin antibodies were used in the indirect immunofluorescence staining method to investigate the role of γ-crystallins in the normal lens development of the amphibians Rana temporaria, Ambystoma mexicanum and Pleurodeles waltlii Michah. In each case, the fluorescence was

  1. Treatment Approach to Small Inadvertent Injury of the Crystalline Lens Anterior Capsule During Iridodialysis Repair Surgery

    Directory of Open Access Journals (Sweden)

    Gökçen Gökçe

    2013-01-01

    Full Text Available A 22-year-old man presented to our ophthalmology department with photophobia. On ophthalmic examination, iridodialysis secondary to blunt trauma that occurred 5 years ago was diagnosed. During iridodialysis repair surgery, long curved double-armed needle of 10-0 polypropylene suture (PC-9 inserted into the 19 gauge side port turned down inadvertently by its own weight, resulting in crystalline lens anterior capsule perforation. Postoperative clinical observation revealed no lens opacification affecting visual acuity. This case report showed that lens aspiration surgery should be postponed if the capsule injury is small.(Turk J Ophthalmol 2013; 43: 61-3

  2. Sutureless, Glueless, Scleral Fixation of Single-Piece and Toric Intraocular Lens: A Novel Technique.

    Science.gov (United States)

    Kelkar, Aditya; Shah, Rachana; Kelkar, Jai; Kelkar, Shreekant; Arora, Ekta

    2015-01-01

    Sutureless, glueless, scleral fixation of an intraocular lens is a known technique of fixing a lens in the scleral pockets. However, this technique is applied to single-piece and toric lenses instead of 3-piece lenses, allowing the advantage of the use of premium lenses in patients with poor capsular support. Favourable results without complications of pigment dispersion, iris transillumination defects, dysphotopsia, elevated intraocular pressure, intraocular hemorrhage and cystoid macular edema with a well-centered, stable intraocular lens have been observed in the 3-month postoperative period in both cases.

  3. A modified technique for extracting a dislocated lens with perfluorocarbon liquids and viscoelastics.

    Science.gov (United States)

    Dalma-Weiszhausz, José; Franco-Cardenas, Valentina; Dalma, Alejandro

    2010-01-01

    The authors describe a modified technique for extraction of a dislocated crystalline lens or large and hard lens fragments displaced into the vitreous cavity. An ophthalmic viscosurgical device was used around and on top of the heavy liquid bubble to keep the lens centered and less mobile for easier phacofragmentation or removal by the cutting-suction probe. This technique was used in 10 eyes, including cases of traumatic dislocation and Marfan syndrome, with excellent anatomical results and no complications that could be attributed to the surgical technique. The technique has also been used to retrieve and reposition dislocated intraocular lenses.

  4. CO2 abatement in the iron and steel industry - the case for carbon capture and storage (CCS

    Directory of Open Access Journals (Sweden)

    A.V. Todorut

    2017-01-01

    Full Text Available The steel industry is amongst the most energy-intensive industries also consuming large amounts of coal and emitting significant volumes of carbon dioxide (CO2. Studies indicate that steelmaking accounts for 6 - 7 % of world anthropogenic CO2 emissions, and 27 % of the total emissions of the world’s manufacturing sector. Steel manufacturers have responded to sustainable resource use and development adopting several measures attaining a reduction in energy consumption of 60 % in the last 50 years. The paper discusses Carbon Capture and Storage (CCS as a CO2 mitigation option, after the 2015 Paris Climate Conference (COP 21 and in relation to the European Regulation for CO2 measurement, reporting and verification.

  5. Secure Storage Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2015-01-01

    The purpose of this report is to clarify the challenges associated with storage for secure enclaves. The major focus areas for the report are: - review of relevant parallel filesystem technologies to identify assets and gaps; - review of filesystem isolation/protection mechanisms, to include native filesystem capabilities and auxiliary/layered techniques; - definition of storage architectures that can be used for customizable compute enclaves (i.e., clarification of use-cases that must be supported for shared storage scenarios); - investigate vendor products related to secure storage. This study provides technical details on the storage and filesystem used for HPC with particular attention on elements that contribute to creating secure storage. We outline the pieces for a a shared storage architecture that balances protection and performance by leveraging the isolation capabilities available in filesystems and virtualization technologies to maintain the integrity of the data. Key Points: There are a few existing and in-progress protection features in Lustre related to secure storage, which are discussed in (Chapter 3.1). These include authentication capabilities like GSSAPI/Kerberos and the in-progress work for GSSAPI/Host-keys. The GPFS filesystem provides native support for encryption, which is not directly available in Lustre. Additionally, GPFS includes authentication/authorization mechanisms for inter-cluster sharing of filesystems (Chapter 3.2). The limitations of key importance for secure storage/filesystems are: (i) restricting sub-tree mounts for parallel filesystem (which is not directly supported in Lustre or GPFS), and (ii) segregation of hosts on the storage network and practical complications with dynamic additions to the storage network, e.g., LNET. A challenge for VM based use cases will be to provide efficient IO forwarding of the parallel filessytem from the host to the guest (VM). There are promising options like para-virtualized filesystems to

  6. Effect of grassland cutting frequency on soil carbon storage - a case study on public lawns in three Swedish cities

    Science.gov (United States)

    Poeplau, C.; Marstorp, H.; Thored, K.; Kätterer, T.

    2016-04-01

    Soils contain the largest terrestrial carbon pool and thus play a crucial role in the global carbon cycle. Grassland soils have particularly high soil organic carbon (SOC) stocks. In Europe (EU 25), grasslands cover 22 % of the land area. It is therefore important to understand the effects of grassland management and management intensity on SOC storage. City lawns constitute a unique study system in this context, since they provide a high functional diversity and thus a wide range of different management intensities per unit area. In this study we investigated frequently mown (on average eight times per season) utility lawns and rarely mown (once per season) meadow-like lawns at three multi-family housing areas in each of three Swedish cities: Uppsala, Malmö, and Gothenburg. The two different lawn types were compared regarding their aboveground net primary production (NPP) and SOC storage. In addition, root biomass was determined in Uppsala. We found significantly higher aboveground NPP and SOC concentrations and significantly lower soil C : N ratio for the utility lawns compared with the meadow-like lawns. On average, aboveground NPP was 24 % or 0.7 Mg C ha-1 yr-1 higher and SOC was 12 % or 7.8 Mg ha-1 higher. Differences in SOC were well explained by differences in aboveground NPP (R2 = 0.39), which indicates that the increase in productivity due to more optimum CO2-assimilating leaf area, leading to higher carbon input to the soil, was the major driver for soil carbon sequestration. Differences in soil C : N ratio indicated a more closed N cycle in utility lawns, which might have additionally affected SOC dynamics. We did not find any difference in root biomass between the two management regimes, and concluded that cutting frequency most likely only exerts an effect on SOC when cuttings are left on the surface.

  7. Foldable Lens Explantation and Exchange:The Reason and Solution

    Institute of Scientific and Technical Information of China (English)

    Danying Zheng; Zhenpin Zhang; Wenhui Yang; Weirong Chen

    2001-01-01

    Objective: To report the explantation and exchange of Hydrophilic Acrylic foldable intraocular lens (IOL) on 14 patients who had visual disturbances caused by the change of transparence on optic. Methods: Sixteen Hydrophilic Acrylic foldable intraocular lenses from 14 patients who presented with decreased visual acuity from 6 months to 1 year after normal phacoemulsification and IOL implantation associated with extensive transparent change on optic of the lens. The lenses were explanted with the bisection technique. All the eyes were reinserted with Acrysof foldable lenses. Results: Sixteen lenses were removed successfully and exchanged with the new lens in the capsule. The posterior capsular rupture and vitreous loss were found in the first two cases. One of them had the zonulysis due to the radial tear of the anterior capsule during the enlargement of the capsular opening. The anterior vitrectomy was performed with IOL fixed on the ciliary sulcus. The visual acuity of all the patients improved obviously without posterior complication. Conclusion: Foldable lens explantation with the bisection technique and exchange had a successful outcome with improvement of ocular condition. Eye science 2001; 17:54 ~56.

  8. On subwavelength imaging with Maxwell's fish eye lens

    CERN Document Server

    Sun, Fei

    2010-01-01

    Both explicit analysis and FEM numerical simulation are used to analyze the field distribution of a line current in the so-called Maxwell's fish eye lens [bounded with a perfectly electrical conductor (PEC) boundary]. We show that such a 2D Maxwell's fish eye lens cannot give perfect imaging due to the fact that high order modes of the object field can hardly reach the image point in Maxwell's fish eye lens. If only zeroth order mode is excited, a subwavelength image of a sharp object may be achieved in some cases, however, its spot-size is larger than the spot size of the initial object field. The image resolution is determined by the field spot size of the image corresponding to the zeroth order component of the object field. Our explicit analysis consists very well with the FEM results for a fish eye lens. Time-domain simulation is also given to verify our conclusion. Multi-point imaging for a single object point is also demonstrated.

  9. Can Maxwell's fish eye lens really give perfect imaging?

    CERN Document Server

    Sun, Fei

    2010-01-01

    Both explicit analysis and FEM numerical simulation are used to analyze the field distribution of a line current in the so-called Maxwell's fish eye lens [bounded with a perfectly electrical conductor (PEC) boundary]. We show that such a 2D Maxwell's fish eye lens cannot give perfect imaging due to the fact that high order modes of the object field can hardly reach the image point in Maxwell's fish eye lens. If only zeroth order mode is excited, a good image of a sharp object may be achieved in some cases, however, its spot-size is larger than the spot size of the initial object field. The image resolution is determined by the field spot size of the image corresponding to the zeroth order component of the object field. Our explicit analysis consists very well with the FEM results for a fish eye lens. Time-domain simulation is also given to verify our conclusion. Multi-point images for a single object point are also demonstrated.

  10. Posterior Iris Fixated Intraocular Lens for Pediatric Traumatic Cataract

    Science.gov (United States)

    Kavitha, V.; Balasubramanian, Preethi; Heralgi, Mallikarjun M.

    2016-01-01

    Purpose: To evaluate the postoperative visual outcomes and complications of posterior iris fixated intraocular lens (IFIOL) implantation for pediatric traumatic cataract. Methods: A retrospective clinical audit was performed of all the pediatric traumatic cataract patients who underwent lens removal and iris fixated lens implantation due to inadequate capsular support with or without corneal tear repair between January 2009 and December 2013. Data were collected and analyzed on the preoperative and postoperative visual outcomes and complications. Results: Twenty-five children (25 eyes; 21 males and 4 females) were enrolled with the mean age of 11 ± 4.0 years. There were 72% of eyes that underwent primary cataract removal with IFIOL implantation. Twenty-eight percent of eyes underwent corneal tear repair prior to intraocular lens (IOL) implantation. Preoperative best corrected visual acuity (BCVA) was hand motion in 32% eyes, counting fingers in 24%, and perception of light in 44%. Postoperative BCVA of 0-0.2 logarithm of minimum angle of resolution was reported in the 64% of eyes. One eye developed secondary glaucoma, one eye underwent re-enclavation, and none developed retinal complications. Conclusion: Posterior IFIOL implantation resulted in an improved visual outcome, low incidence of postoperative complications, and is a good alternative to other IOL, in the cases of pediatric traumatic cataract without adequate capsular support. PMID:27162456

  11. Noise Exposure of Teachers in Nursery Schools—Evaluation of Measures for Noise Reduction When Dropping DUPLO Toy Bricks into Storage Cases by Sound Analyses

    Directory of Open Access Journals (Sweden)

    Konstanze Gebauer

    2016-07-01

    Full Text Available Background: Although noise is one of the leading work-related health risk factors for teachers, many nursery schools lack sufficient noise reduction measures. Methods: This intervention study evaluated the noise exposure of nursery school teachers when dropping DUPLO toy bricks into storage cases. Sound analyses of the impact included assessment of the maximum sound pressure level (LAFmax as well as frequency analyses with 1/3 octave band filter. For the purpose of standardization, a customized gadget was developed. Recordings were performed in 11 cases of different materials and designs to assess the impact on sound level reduction. Thereby, the acoustic effects of three damping materials (foam rubber, carpet, and PU-foam were investigated. Results: The lowest LAFmax was measured in cases consisting of “metal grid” (90.71 dB or of a woven willow “basket” (91.61 dB, whereas a case of “aluminium” (103.34 dB generated the highest impact LAFmax. The frequency analyses determined especially low LAFmax in the frequency bands between 80 and 2500 Hz in cases designs “metal grid” and “basket”. The insertion of PU-foam achieved the most significant attenuation of LAFmax (−13.88 dB and, in the frequency analyses, the best sound damping. Conclusion: The dropping of DUPLO bricks in cases contributes to the high noise level in nursery schools, but measured LAFmax show no evidence for the danger of acute hearing loss. However, continuous exposure may lead to functional impairment of the hair cells and trigger stress reactions. We recommend noise reduction by utilizing cases of woven “basket” with an insert of PU-foam.

  12. [Surgery in posterior luxated lens fragments through intravitreal phacofragmentation].

    Science.gov (United States)

    Branisteanu, D; Moraru, Andreea

    2013-01-01

    To assess the intra and postoperative difficulties, the anatomical and functional results after intravitreal phacoemulsification during pars plana vitrectomy for retained intraocular lens fragments. Retrospective, non-comparative case series of 48 eyes who underwent vitrectomy for posterior dislocated lens fragments during phacoemulsification between January 2000 and January 2010. In 11 cases the vitrectomy was performed immediately, within 24 hours, and in 37 cases it was delayed 2 to 10 days after cataract surgery. During pars plana vitrectomy the lens fragments were separated of vitreous strings and then phacoemulsification was performed into the center of vitreous cavity. All cases were performed under local anesthesia by the same surgeon. During vitrectomy PFCL was used in 5 cases to protect central retina. Cases were followed-up at least 6 months. Statistical analysis was performed using Wilcoxon and chi square tests. Mean age in the study group was 65.38% 9.49 years (ranging 52-82 years). The mean visual acuity improved from 0.12% 0.07 (0.04-0.3) preoperatively to 0.3% 0.2 (0.05-0.6) postoperatively (p < 0.01). Mean intraocular pressure decreased postoperatively from 26.24% 9.3 mmHg (16-48 mmHg) to 15.95% 3.69 mmHg(12-24 mmHg) (p < 0.01). In all cases corneal edema and intraocular inflammation ceased after vitrectomy. In those 11 cases operated immediately the intravitreal phacoemulsification time was longer, as well as greater number of intraoperative complication (corneal edema, corneal leakage). In 4 out of these 11 cases (36.36%) severe postoperative retinal complications were noticed (2 cases of retinal detachment, 1 case of choroidal detachment and 1 case of choroidal hematoma). In the delayed group the only postoperative complication was cystoid macular edema in 9 out of 37 cases (24.32%). Removal of retained intraocular lens fragments suspended the intraocular inflammation and normalized intraocular pressure in all cases. Our results are in favor of

  13. Determination of the critical time of canal storage capacity controlled by cross pump stations “Case Study: Egypt, El-Salam Canal”

    Directory of Open Access Journals (Sweden)

    Ahmed M. El-Belasy

    2013-06-01

    Full Text Available El-Salam Pump Stations (1 and (2 are located at 22.1 km and 54.3 km respectively at El-Salam Canal. When El-Salam Pump Station (1 is in operation, and switching off El-Salam Pump Station (2, water level rises upstream El-Salam Pump Station (2. Water level overtops El-Salam Pump Station (2 and banks upstream it. Flooding then takes place as Wadi El Noqra Canal, Egypt. This necessitates discharging the excess water to protect the pump station and the canal from water flooding when the electricity is shut down. The hydrodynamic simulation of El-Salam Canal determinates the critical time for storage capacity according to location and type of emergency spillways through the numerical model to prevent water overtopping upstream pump stations. Determination of the critical time of storage capacity is considered as a new parameter in case of the hydraulic design of the canal controlled by cross pump stations.

  14. Evolution of a pre and post lens tear film with a contact lens

    Science.gov (United States)

    Gerhart, Matthew; Anderson, Daniel

    2012-11-01

    The work is the development, implementation, and analysis of a two-dimensional tear film model including a porous contact lens. The geometry of the problem is: a pre-lens layer that is a thin tear film between the outside air and contact lens, a contact lens that is a rigid but movable porous substrate, and a post-lens layer that is a thin film layer between the contact lens and the cornea. We are looking at short and long term behavior of the evolution of the thin film in the pre-lens layer coupled with the porous layer and the thin squeeze film in the post-lens layer. We model the different behaviors that arise as the Darcy number, evaporation effects, and boundary flux conditions change.

  15. Lateral shear interferometry with holo shear lens

    Science.gov (United States)

    Joenathan, C.; Mohanty, R. K.; Sirohi, R. S.

    1984-12-01

    A simple method for obtaining lateral shear using holo shear lenses (HSL) has been discussed. This simple device which produces lateral shears in the orthogonal directions has been used for lens testing. The holo shear lens is placed at or near the focus of the lens to be tested. It has also been shown that HSL can be used in speckle shear interferometry as it performs both the functions of shearing and imaging.

  16. An inverse and analytic lens design method

    OpenAIRE

    Lu, Yang; Lakshminarayanan, Vasudevan

    2016-01-01

    Traditional lens design is a numerical and forward process based on ray tracing and aberration theory. This method has limitations because the initial configuration of the lens has to be specified and the aberrations of the lenses have to considered. This paper is an initial attempt to investigate an analytic and inverse lens design method, called Lagrange, to overcome these barriers. Lagrange method tries to build differential equations in terms of the system parameters and the system input ...

  17. Assessing land take by urban development and its impact on carbon storage: Findings from two case studies in Italy

    Energy Technology Data Exchange (ETDEWEB)

    Sallustio, L. [Dipartimento di Bioscienze e Territorio (DiBT), Università del Molise, C. da Fonte Lappone, I-86090 Isernia (Italy); Quatrini, V. [Dipartimento per l' Innovazione nei sistemi Biologici, Agroalimentari e Forestali (DIBAF), Università della Tuscia, v. San Camillo de Lellis, I-01100 Viterbo (Italy); Geneletti, D., E-mail: davide.geneletti@unitn.it [Department of Civil, Environmental and Mechanical Engineering, University of Trento, Via Mesiano 77, 38123 Trento (Italy); Corona, P., E-mail: piermaria.corona@entecra.it [Consiglio per la ricerca in agricoltura e l' analisi dell' economia agraria, Forestry Research Centre (CRA-SEL), Viale S. Margherita 80, 52100 Arezzo (Italy); Marchetti, M. [Dipartimento di Bioscienze e Territorio (DiBT), Università del Molise, C. da Fonte Lappone, I-86090 Isernia (Italy)

    2015-09-15

    Highlights: • We tested a new methodology for monitoring land take and its effects on C storage. • The ecological impact of urban growth derives from the previous land use. • C loss increases with the naturalness of the territory. • Different urban assets may imply different forms of land take containment. Land take due to urbanization triggers a series of negative environmental impacts with direct effects on quality of life for people living in cities. Changes in ecosystem services are associated with land take, among which is the immediate C loss due to land use conversion. Land use change monitoring represents the first step in quantifying land take and its drivers and impacts. To this end, we propose an innovative methodology for monitoring land take and its effects on ecosystem services (in particular, C loss) under multi-scale contexts. The devised approach was tested in two areas with similar sizes, but different land take levels during the time-span 1990–2008 in Central Italy (the Province of Rome and the Molise Region). The estimates of total coverage of built up areas were calculated using point sampling. The area of the urban patches including each sampling point classified as built up areas in the year 1990 and/or in the year 2008 is used to estimate total abundance and average area of built up areas. Biophysical and economic values for carbon loss associated with land take were calculated using InVEST. Although land take was 7–8 times higher in the Province of Rome (from 15.1% in 1990 to 20.4% in 2008) than in Molise region, our findings show that its relative impact on C storage is higher in the latter, where the urban growth consistently affects not only croplands but also semi-natural land uses such as grasslands and other wooded lands. The total C loss due to land take has been estimated in 1.6 million Mg C, corresponding to almost 355 million €. Finally, the paper discusses the main characteristics of urban growth and their

  18. Crystalline lens dislocation secondary to bacterial endogenous endophthalmitis

    Directory of Open Access Journals (Sweden)

    Amit Sangave

    2017-09-01

    Conclusions and importance: Endophthalmitis secondary to GAS has been sparsely reported in the literature, and this case highlights a unique clinical presentation. We suspect that this atypical non-hemolytic strain may have evaded detection on initial pharyngeal cultures. Additionally, we hypothesize that GAS-mediated protease release resulted in breakdown of the zonular fibers and subsequent lens dislocation. Ophthalmologists should be aware of GAS and its devastating intraocular manifestations.

  19. Algorithm design of liquid lens inspection system

    Science.gov (United States)

    Hsieh, Lu-Lin; Wang, Chun-Chieh

    2008-08-01

    In mobile lens domain, the glass lens is often to be applied in high-resolution requirement situation; but the glass zoom lens needs to be collocated with movable machinery and voice-coil motor, which usually arises some space limits in minimum design. In high level molding component technology development, the appearance of liquid lens has become the focus of mobile phone and digital camera companies. The liquid lens sets with solid optical lens and driving circuit has replaced the original components. As a result, the volume requirement is decreased to merely 50% of the original design. Besides, with the high focus adjusting speed, low energy requirement, high durability, and low-cost manufacturing process, the liquid lens shows advantages in the competitive market. In the past, authors only need to inspect the scrape defect made by external force for the glass lens. As to the liquid lens, authors need to inspect the state of four different structural layers due to the different design and structure. In this paper, authors apply machine vision and digital image processing technology to administer inspections in the particular layer according to the needs of users. According to our experiment results, the algorithm proposed can automatically delete non-focus background, extract the region of interest, find out and analyze the defects efficiently in the particular layer. In the future, authors will combine the algorithm of the system with automatic-focus technology to implement the inside inspection based on the product inspective demands.

  20. A Magnification Lens for Interactive Volume Visualization

    Energy Technology Data Exchange (ETDEWEB)

    LaMar, E; Hamann, B; Joy, K I

    2001-07-19

    Volume visualization of large data sets suffers from the same problem that many other visualization modalities suffer from: either one can visualize the entire data set and lose small details or visualize a small region and lose the context. In this paper, they present a magnification lens technique for volume visualization. While the notion of a magnification-lens is not new, and other techniques attempt to simulate the physical properties of a magnifying lens, their contribution is in developing a magnification lens that is fast, can be implemented using a fairly small software overhead, and has a natural, intuitive appearance. The issue with magnification lens is the border, or transition, region. The lens center and exterior have a constant zoom factor, and are simple to render. It is the border region that blends between the external and interior magnification, and has a non-constant magnification. They use the perspective-correct textures capability, available in most current graphics systems, to produce a lens with a tessellated border region that approximates linear compression with respect to the radius of the magnification lens. They discuss how a cubic border can mitigate the discontinuities resulting from the use of a linear function, without significant performance loss. They discuss various issues concerning development of a three-dimensional magnification lens.

  1. Trends of contact lens prescribing in Jordan.

    Science.gov (United States)

    Haddad, Mera F; Bakkar, May; Gammoh, Yazan; Morgan, Philip

    2016-10-01

    To evaluate contact lens prescribing trends among optometrists in Jordan. Optometrists from 173 practices in Jordan were surveyed about prescribing contact lenses in their practice. Practitioners were required to record information for the last 10 patients that visited their practice. Demographic data such as age and gender was obtained for each patient. In addition, data relating to lens type, lens design, replacement methods and the care regime advised to each patient were recorded. Practitioners were required to provide information relating to their education and years of experience. The influence of education and experience with respect to lens prescribing trends was explored using linear regression models for the proportions of lens types fitted for patients. A total of 1730 contact lens fits were analyzed. The mean (±SD) age of lens wearers was 26.6 (±7.9) years, of whom 65% were female. Conventional hydrogel lenses were the most prescribed lenses, accounting for 60.3% of the fits, followed by silicone hydrogel lenses (31.3%), and rigid lenses (8.4%). In terms of lens design, spherical lenses appeared to be most commonly prescribed on monthly basis. Daily disposable lenses were second most prescribed lens modality, accounting for 20.4% of the study sample. Multi-purpose solution (MPS) was the preferred care regimen, with a prevalence of 88.1% reported in the study sample, compared to hydrogen peroxide (1-step and 2-step), which represented only 2.8% of the patients in this study. A relationship was established between the two educational groups for rigid lens prescribing (F=17.4, ptrends among optometrists in Jordan. Contact lens prescribing in terms of lens type, lens design, modality of wear and care regimen agree with global market trends with small variations. This report will help practitioners and the industry to detect any deficiencies in the contact lens market in Jordan, which will ease implementing current and future plans in developing contact

  2. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    Science.gov (United States)

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal biocompatibility, specifically through the quantification of cell-surface markers of leukocyte activation.

  3. Assessment of Risk Due to Chemicals Transferred in a Watershed: A Case of an Aquifer Storage Transfer and Recovery Site

    Directory of Open Access Journals (Sweden)

    Hyon Wook Ji

    2016-06-01

    Full Text Available This paper presents an analysis of the potential risks of chemicals that can affect an aquifer storage transfer and recovery (ASTR site. ASTR is a water supply system that injects surface water into an aquifer and then extracts naturally filtered groundwater. The pilot site of the ASTR supplying drinking water is located downstream of the Nakdong River in South Korea. Hazard analysis and critical control points (HACCP was adopted to ensure suitable water quality in response to the deteriorated water quality of the Nakdong River. HACCP is a proactive management system for ensuring consistent confidence in food (or water. Hazard analysis, the first of the seven principles of HACCP, assesses physical, microbial, chemical, and radioactive hazards. This study focuses on the chemicals that are most likely to be involved in major hazardous events. Pollutant release and transfer register (PRTR data were used to analyze potential risks of chemicals. A PRTR is a national environmental database of potentially hazardous chemicals. Potential risk analysis considers the total amount of chemicals transferred off-site for treatment or disposal. Fifty-five cities and the top 10 chemicals released in the Nakdong River basin were investigated. Potential risk was defined as a function of total transfers, the relative distance, and toxicity. The top 10 cities with high potential risks were identified, and the city with the highest potential risk turned out to be Ulju.

  4. Protamine sulfate precipitation method depletes abundant plant seed-storage proteins: A case study on legume plants.

    Science.gov (United States)

    Kim, Yu Ji; Wang, Yiming; Gupta, Ravi; Kim, So Wun; Min, Chul Woo; Kim, Yong Chul; Park, Ki Hun; Agrawal, Ganesh Kumar; Rakwal, Randeep; Choung, Myoung-Gun; Kang, Kyu Young; Kim, Sun Tae

    2015-05-01

    Depletion of abundant proteins is one of the effective ways to improve detection and identification of low-abundance proteins. Our previous study showed that protamine sulfate precipitation (PSP) method can deplete abundant ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) from leaf proteins and is suitable for their in-depth proteome investigation. In this study, we provide evidence that the PSP method can also be effectively used for depletion of abundant seed-storage proteins (SSPs) from the total seed proteins of diverse legume plants including soybean, broad bean, pea, wild soybean, and peanut. The 0.05% protamine sulfate (PS) was sufficient to deplete major SSPs from all legumes tested except for peanut where 0.1% PS was required. SDS-PAGE, Western blotting and 2DE analyses of PS-treated soybean and peanut seed proteins showed enriched spots in PS-supernatant than total proteins. Coefficient of variation percentage (%CV) and principal component analysis of 2DE spots support the reproducibility, suitability, and efficacy of the PSP method for quantitative and comparative seed proteome analysis. MALDI-TOF-TOF successfully identified some protein spots from soybean and peanut. Hence, this simple, reproducible, economical PSP method has a broader application in depleting plant abundant proteins including SSPs in addition to RuBisCO, allowing discussion for comprehensive proteome establishment and parallel comparative studies in plants.

  5. Evaluation of immersion 20 MHz B-scan ultrasonography in observing lens in the alkali burn eyes

    Institute of Scientific and Technical Information of China (English)

    Qing-Hua; Yang; Bing; Chen; Li-Qiang; Wang; Guang-Hua; Peng; Zhao-Hui; Li; Yi-Fei; Huang

    2014-01-01

    ·AIM: To evaluate the accuracy of 20 MHz immersion Bscan ultrasonography in observing lens and to investigate the value of this noninvasive preoperative diagnosis method in alkali burn eyes.·METHODS: It was a comparative study. Fifty-six cases(56 eyes) of alkali burn eyes were examined by ultrasound biomicroscopy(UBM) and immersion 20 MHz B-scan ultrasonography from June 2011 to April 2013,the images were analyzed, and the ultrasonographic diagnosis compared with the operation results.·RESULTS: In 56 alkali burn eyes examined by UBM, the lens were not detected in 16 eyes; the IOL could be detected in 2 eyes; the anterior lens capsule surface or/and the front lens could be detected in 18 eyes, and lens opacification in 3 eyes of them; suspected abnormal lens were detected in the other 20 eyes. In all the same eyes examined by immersion 20 MHz B-scan ultrasonography,the lens were not detected in 16 eyes; the IOL could be detected in 2 eyes; 24 abnormal lens(opacity, lens expansion, shrinkage) and 14 normal lens were found.Compared with the intraoperative findings, the diagnostic accordance rate of the immersion 20 MHz B-scan appearance of lens was 100%(56/56), which was significantly higher than examined by UBM 57.14%(32/56)(χ2=30.55, P =0.0000).·CONCLUSION: Immersion 20 MHz B-scan ultrasonography can observe the lens accurately in alkali burn eyes. It has important clinical value to combine with UBM in eyes of alkali burn.

  6. Practical assessment of veiling glare in camera lens system

    Directory of Open Access Journals (Sweden)

    Ivana Tomić

    2014-12-01

    Full Text Available Veiling glare can be defined as an unwanted or stray light in an optical system caused by internal reflections between elements of the camera lens. It leads to image fogging and degradation of both image density and contrast, diminishing its overall quality. Each lens is susceptible to veiling glare to some extent - sometimes it is negligible, but it most cases it leads to the visible defects in an image. Unlike the other flaws and errors, lens flare is not easy to correct. Hence, it is highly recommended to prevent it during the capturing phase, if possible. For some applications, it can also be useful to estimate the susceptibility to a lens glare i.e. the degree of a glare in the lens system. Few methods are usually used for this types of testing. Some of the methods are hard to implement and often do not lead to consistent results. In this paper, we assessed one relatively easy method for practical evaluation of veiling glare. Method contains three steps: creating an appropriate scene, capturing the target image and analyzing it. In order to evaluate its applicability, we tested four lenses for Nikon 700 digital camera. Lenses used were with the fixed focal length of 35 and 85 mm and differed by the coatings of their elements. Furthermore, we evaluated the influence of aperture on veiling glare value. It was shown that presented method is not applicable for testing the lenses with short focal length and that the new generation of lenses, equipped with Nano crystal coatings are less susceptible to veiling glare. Aperture did not affect veiling glare value significantly.

  7. Flat lens for seismic waves

    CERN Document Server

    Brule, Stephane; Guenneau, Sebastien

    2016-01-01

    A prerequisite for achieving seismic invisibility is to demonstrate the ability of civil engineers to control seismic waves with artificially structured soils. We carry out large-scale field tests with a structured soil made of a grid consisting of cylindrical and vertical holes in the ground and a low frequency artificial source (< 10 Hz). This allows the identification of a distribution of energy inside the grid, which can be interpreted as the consequence of an effective negative refraction index. Such a flat lens reminiscent of what Veselago and Pendry envisioned for light opens avenues in seismic metamaterials to counteract the most devastating components of seismic signals.

  8. Atom lens without chromatic aberrations

    CERN Document Server

    Efremov, Maxim A; Schleich, Wolfgang P

    2012-01-01

    We propose a lens for atoms with reduced chromatic aberrations and calculate its focal length and spot size. In our scheme a two-level atom interacts with a near-resonant standing light wave formed by two running waves of slightly different wave vectors, and a far-detuned running wave propagating perpendicular to the standing wave. We show that within the Raman-Nath approximation and for an adiabatically slow atom-light interaction, the phase acquired by the atom is independent of the incident atomic velocity.

  9. Intraocular lens with accommodation capacity

    OpenAIRE

    Dorronsoro, Carlos; Alejandre, Nicolás; Bekesi, Nandor; Marcos, Susana

    2014-01-01

    Intraocular lens with accommodation capacity comprising a first optical member (1) having a dynamic optical power, to which a second optical member (2) with a fixed optical power is affixed, in such a manner that at least a central part of each of one of one of the curved surfaces (2a, 2b) of the second optical member (2) and of at least one of the surfaces (1a, 1b) of the first optical member (1) are in contact with each other, the second optical member (2) and the first optical member (1) p...

  10. Emissions due to the natural gas storage well-casing blowout at Aliso Canyon/SS-25

    Science.gov (United States)

    Herndon, Scott; Daube, Conner; Jervis, Dylan; Yacovitch, Tara; Roscioli, Joseph; Curry, Jason; Nelson, David; Knighton, Berk

    2017-04-01

    The pronounced increase in unconventional gas production in North America over the last fifteen years has intensified interest in understanding emissions and leaks in the supply chain from well pad to end use. Los Angeles, California is home 19 million consumers of natural gas in both industry and domestic end use. The well blowout at Aliso Canyon Natural Gas Storage Facility in the greater Los Angeles area was quantified using the tracer flux ratio method (TFR). Over 400 tracer plume transects were collected, each lasting 15-300 seconds, using instrumentation aboard a mobile platform on 25 days between December 21, 2015 and March 9, 2016. The leak rate from October 23rd to February 11th has been estimated here using a combination of this work (TFR) and the flight mass balance (FMB) data [Conley et al., 2016]. This estimate relies on the TFR data as the most specific SS-25 emission dataset. Scaling the FMB dataset, the leak rate is projected from Oct 23rd to December 21th. Adding up the emissions inferred and measured suggests a total leak burden of 86,022 ± 8,393 metric tons of methane. This work quantified the emissions during the "bottom kill" procedure which halted the primary emission leak. The ethane to methane enhancement ratio observed downwind of the leak site is consistent with the content of ethane in the natural gas at this site and provides definitive evidence that the methane emission rate quantified via tracer flux ratio is not due to a nearby landfill or other potential biogenic sources. Additionally, the TFR approach employed here is assessing only the leaks due to the SS-25 well blowout and excludes other possible emissions at the facility.

  11. Numerical evaluation of community-scale aquifer storage, transfer and recovery technology: A case study from coastal Bangladesh

    Science.gov (United States)

    Barker, Jessica L. B.; Hassan, Md. Mahadi; Sultana, Sarmin; Ahmed, Kazi Matin; Robinson, Clare E.

    2016-09-01

    Aquifer storage, transfer and recovery (ASTR) may be an efficient low cost water supply technology for rural coastal communities that experience seasonal freshwater scarcity. The feasibility of ASTR as a water supply alternative is being evaluated in communities in south-western Bangladesh where the shallow aquifers are naturally brackish and severe seasonal freshwater scarcity is compounded by frequent extreme weather events. A numerical variable-density groundwater model, first evaluated against data from an existing community-scale ASTR system, was applied to identify the influence of hydrogeological as well as design and operational parameters on system performance. For community-scale systems, it is a delicate balance to achieve acceptable water quality at the extraction well whilst maintaining a high recovery efficiency (RE) as dispersive mixing can dominate relative to the small size of the injected freshwater plume. For the existing ASTR system configuration used in Bangladesh where the injection head is controlled and the extraction rate is set based on the community water demand, larger aquifer hydraulic conductivity, aquifer depth and injection head improve the water quality (lower total dissolved solids concentration) in the extracted water because of higher injection rates, but the RE is reduced. To support future ASTR system design in similar coastal settings, an improved system configuration was determined and relevant non-dimensional design criteria were identified. Analyses showed that four injection wells distributed around a central single extraction well leads to high RE provided the distance between the injection wells and extraction well is less than half the theoretical radius of the injected freshwater plume. The theoretical plume radius relative to the aquifer dispersivity is also an important design consideration to ensure adequate system performance. The results presented provide valuable insights into the feasibility and design

  12. 光学镜片加工企业节水改造实例%Case study on the modification of water-saving in optical lens processing enterprises

    Institute of Scientific and Technical Information of China (English)

    张霞; 张雷; 朱海涛; 刘娜

    2016-01-01

    光学镜片加工的清洗流程消耗大量水资源,同时末端产生大量清洗废水。2015年水污染防治行动计划实施,其中明确提出着力节约保护水资源,生产企业面临严峻的节水压力。天津市某光学镜片加工企业通过建立水平衡明确镜片加工清洗流程的用水排水情况,在此基础上对清洗流程进行改造,取得了明显的节水效益和废水减排效益。%A large number of wate r resources is consumed in the cleaning process of optical lens processing enter-prises,and a great deal of cleaning wastewater is produced at the terminal at the same time. The water pollution con-trol action plan was implemented in 2015 ,and it was proposed that the saving and protection of water resources should be focused on definitely. Production enterprises are facing severe pressure from the conservation of water reso-urces. By means of establishing water consumption balance ,the water discharge situation in optical lens processing cleaning process has been comfirmed for an optical lens processing factory in Tianjin. Based on this ,the cleaning process has been modified,and obvious water saving profit and wastewater emission reduction profit are obtained.

  13. Negative refractive perfect lens vs Spherical geodesic lens. Perfect Imaging comparative analysis

    CERN Document Server

    Gonzalez, Juan C; Minano, Juan C; Grabovickic, Dejan

    2012-01-01

    Negative Refractive Lens (NRL) has shown that an optical system can produce images with details below the classic Abbe diffraction limit. This optical system transmits the electric field, emitted by the object surface, towards the image surface producing the same field distribution in both surfaces. In particular, a Dirac delta electric field in the object surface is focused without diffraction limit to the Dirac delta electric field in the image surface. The Maxwell Fish Eye lens (MFE) and the Spherical Geodesic Waveguide (SGW) have been claimed to break the diffraction limit using positive refraction with a different meaning. In these cases, it has been considered the power transmission from a point source to a point receptor, which falls drastically when the receptor is displaced from the focus by a distance much smaller than the wavelength. Although these systems can detect displacements up to Wavelength/500, they cannot be compared to the NRL, since the concept of the object and image surface is not esta...

  14. Contact lens intolerance: refitting with dual axis lens for corneal refractive therapy

    Science.gov (United States)

    López-López, María; Pelegrín-Sánchez, José Miguel; Sobrado-Calvo, Paloma; García-Ayuso, Diego

    2011-01-01

    Corneal refractive therapy is a non-surgical procedure whose main purpose is to improve uncorrected visual acuity during the day, without spectacles or contact lenses. We report an adult woman who shows contact lens intolerance and does not want to wear eyeglasses. We used dual axis contact lens to improve lens centration. We demonstrate a maintained unaided visual acuity during one year of treatment. In conclusion, we can consider refitting with dual axis lens for corneal refractive therapy as a non-surgical option for patients who show contact lens intolerance.

  15. Treatment of a dislocated lens by transcorneal vitrectomy and bimanual phacoemulsification

    Directory of Open Access Journals (Sweden)

    Watanabe A

    2014-08-01

    Full Text Available Akira Watanabe, Tamaki Gekka, Hiroshi Tsuneoka Department of Ophthalmology, The Jikei University School of Medicine, Tokyo, Japan Background: As a method of treatment for a dropped lens nucleus, which occurred during cataract surgery, the dropped lens nucleus was removed through the corneal wound without using pars plana vitrectomy (PPV. After vitrectomy, the dropped lens nucleus was floated on the perfluorocarbon liquid (PFCL. The floating lens nucleus was then phacoemulsified and aspirated. During surgery, irrigation from the anterior chamber was performed. This method was very effective for treatment of a dropped hard nucleus.Case report: During cataract surgery on the left eye of an 80-year-old woman, a posterior capsule rupture occurred. As a result, the lens nucleus dropped into the vitreous cavity. Irrigation to the anterior chamber was performed, with an anterior chamber maintainer inserted through a newly created side port at the corneal limbus. A vitreous cutter and a light guide were inserted in order to perform vitrectomy through the corneal incisions that were created for the cataract surgery. After vitrectomy, the dropped lens nucleus was floated using PFCL. The floating lens nucleus was removed by a bimanual phacoemulsification technique, with the anterior chamber irrigation continuing. The separation of the irrigation port and the aspiration port allowed for effective treatment of the dropped nucleus that was floating on the PFCL, even using a ­phacoemulsification machine with a peristaltic pump system. Safe and effective vitrectomy, similar to a PPV, could be performed with this method using three corneal ports.Conclusion: This technique may allow safer and more effective treatment for a dropped lens nucleus compared with conventional PPV. With this technique, corneal distortion due to surgical manipulation can lead to reduced visibility of the posterior eye. Keywords: dislocated lens, transcorneal vitrectomy, bimanual

  16. Determination of the manufacturing cost by UEP method: a case study in the cold storage sausage making industry

    Directory of Open Access Journals (Sweden)

    Rodney Wernke

    2015-03-01

    Full Text Available This article aimed to answer the following research question: how to show the manager of a company that produces sausages’ the positive impacts of knowing the unit cost of processing? The objective was to verify the possibility of applying the UEP method to determine the cost of processing the products manufactured by a company of this type. A descriptive methodology was used in a case study format, with a qualitative approach. A literature review was initially conducted regarding the UEP method, approaching aspects such as history, concepts, guiding principles, steps to be taken for implementation, benefits and associated limitations. Then the main characteristics of the case study conducted through a brief description of the focused company and the steps followed to implement such a method of costing were presented. Subsequently, the informational benefits highlighted by the study and the limitations of methodology were listed . It was concluded that the method is applicable in the context of this company.

  17. Plasma Lens for Muon and Neutrino Beams

    Energy Technology Data Exchange (ETDEWEB)

    Kahn,S.A.; Korenev, S.; Bishai, M.; Diwan, M.; Gallardo, J.C.; Hershcovitch, A.; Johnson, B.M.

    2008-06-23

    The plasma lens is examined as an alternate to focusing horns and solenoids for use in a neutrino or muon beam facility. The plasma lens concept is based on a combined high-energy lens/target configuration. The current is fed at electrodes located upstream and downstream from the target where pion capturing is needed. The current flows primarily in the plasma, which has a lower resistivity than the target. A second plasma lens section, with an additional current feed, follows the target to provide shaping of the plasma for optimum focusing. The plasma lens is immersed in an additional solenoid magnetic field to facilitate the plasma stability. The geometry of the plasma is shaped to provide optimal pion capture. Simulations of this plasma lens system have shown a 25% higher neutrino production than the horn system. Plasma lenses have the additional advantage of negligible pion absorption and scattering by the lens material and reduced neutrino contamination during anti-neutrino running. Results of particle simulations using plasma lens will be presented.

  18. Liquid lens using acoustic radiation force.

    Science.gov (United States)

    Koyama, Daisuke; Isago, Ryoichi; Nakamura, Kentaro

    2011-03-01

    A liquid lens is proposed that uses acoustic radiation force with no mechanical moving parts. It consists of a cylindrical acrylic cell filled with two immiscible liquids (degassed water and silicone oil) and a concave ultrasound transducer. The focal point of the transducer is located on the oil-water interface, which functions as a lens. The acoustic radiation force is generated when there is a difference in the acoustic energy densities of different media. An acoustic standing wave was generated in the axial direction of the lens and the variation of the shape of the oil-water interface was observed by optical coherence tomography (OCT). The lens profile can be rapidly changed by varying the acoustic radiation force from the transducer. The kinematic viscosity of silicone oil was optimized to minimize the response times of the lens. Response times of 40 and 80 ms when switching ultrasonic radiation on and off were obtained with a kinematic viscosity of 200 cSt. The path of a laser beam transmitted through the lens was calculated by ray-tracing simulations based on the experimental results obtained by OCT. The transmitted laser beam could be focused by applying an input voltage. The liquid lens could be operated as a variable-focus lens by varying the input voltage.

  19. Metasurface lens: Shrinking the camera size

    Science.gov (United States)

    Sun, Cheng

    2017-01-01

    A miniaturized camera has been developed by integrating a planar metasurface lens doublet with a CMOS image sensor. The metasurface lens doublet corrects the monochromatic aberration and thus delivers nearly diffraction-limited image quality over a wide field of view.

  20. Managing as designing with a positive lens

    NARCIS (Netherlands)

    Avital, M.; Boland, R.J.; Avital, M.; Boland, R.J.; Cooperrider, D.L.

    2007-01-01

    The role and potential contribution of a positive lens to the design of systems and organizations is the focus of this essay. The positive lens refers to an emerging perspective in the social sciences that emphasizes a positive stance toward our capacity to construct better organizations and technol

  1. Optimization of Zoom Lens with Discrete State of Liquid Lens Elements by Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Cheng-Mu Tsai

    2015-01-01

    Full Text Available This paper is to employ liquid lens elements to design a lens with zoom function by using the genetic algorithm (GA optimization. The liquid lens elements used in the proposal can apply voltage adjustment to generate the electrical field that induces the liquid with electric conductivity to vary the surface curvature between two different kinds of liquids. According to the voltage level, the liquid lens element makes the discrete variation of the curvature and thickness realize the zoom function without moving the lens groups so that the overall length can be reduced. However, it is difficult to design the zoom lens under the discrete variation of the curvature and thickness in the liquid lens elements and the mechanical space that is constantly limited. The GA offers a flexible way for lens optimization. We regarded the spot size as the fitness function to look for the optimum curvatures, thickness, and the corresponding statuses of liquid lens elements for the zoom lens. As a result, the zoom lens with constant space can be realized by running the selection, crossover, and mutation operation in the GA optimization.

  2. The Experimental Study on Implantation of Intraocular Lens in Different Animals

    Institute of Scientific and Technical Information of China (English)

    WANGGui-qin; PENGXiu-jun; GUHan-qing

    2004-01-01

    To prevent the complications in cataract surgeries, the eyes of rabbits and monkeys were implanted with intraocular lens for 360 days. Methods: The eyes of the rabbits were performed with phacoemulsification and soft intraocular lens implantation. The eyes of the monkeys were performed with extracapsular cataract extraction and hard intraocular lens implantation. Results: The postoperative reactions included corneal edema, anterior chamber exudation, posterior capsule opacification and so on. The complications in the eyes of the rabbits were more than that in the eyes of the monkeys. Conclusion: The different postoperative reactions happened in different animals. In clinical the choice of the operative method and intraocular lens depended on the case in order to acquire the best sight.

  3. Terrestrial Energy Storage SPS Systems

    Science.gov (United States)

    Brandhorst, Henry W., Jr.

    1998-01-01

    Terrestrial energy storage systems for the SSP system were evaluated that could maintain the 1.2 GW power level during periods of brief outages from the solar powered satellite (SPS). Short-term outages of ten minutes and long-term outages up to four hours have been identified as "typical" cases where the ground-based energy storage system would be required to supply power to the grid. These brief interruptions in transmission could result from performing maintenance on the solar power satellite or from safety considerations necessitating the power beam be turned off. For example, one situation would be to allow for the safe passage of airplanes through the space occupied by the beam. Under these conditions, the energy storage system needs to be capable of storing 200 MW-hrs and 4.8 GW-hrs, respectively. The types of energy storage systems to be considered include compressed air energy storage, inertial energy storage, electrochemical energy storage, superconducting magnetic energy storage, and pumped hydro energy storage. For each of these technologies, the state-of-the-art in terms of energy and power densities were identified as well as the potential for scaling to the size systems required by the SSP system. Other issues addressed included the performance, life expectancy, cost, and necessary infrastructure and site locations for the various storage technologies.

  4. Fifty-year follow-up and Strampelli anterior chamber intraocular lens.

    Science.gov (United States)

    Oakley, Carmen L; Nigro, Matthew A; Vote, Brendan J

    2015-01-01

    The Strampelli anterior chamber intraocular lens was created in 1953, and was primarily used to treat myopia and aphakia. Due to the positioning of the lens, it was associated with a number of complications, and was later modified to decrease the rate of significant complications, including endothelial cell loss. This paper describes a 62-year-old man, who has had a Strampelli intraocular lens (IOL) in situ for 52 years, with relatively few complications. The case provides a framework for reflection on the significant advances in the development of IOLs since the Strampelli era. The Strampelli anterior chamber intraocular lens was created in 1953, and was primarily used to treat myopia and aphakia. Due to the positioning of the lens, it was associated with a number of complications, and was later modified to decrease the rate of significant complications, including endothelial cell loss. This paper describes a 62-year-old man, who has had a Strampelli intraocular lens (IOL) in situ for 52 years, with relatively few complications. The case provides a framework for reflection on the significant advances in the development of IOLs since the Strampelli era.

  5. Higher risk taking propensity of contact lens wearers is associated with less compliance.

    Science.gov (United States)

    Carnt, Nicole; Keay, Lisa; Willcox, Mark; Evans, Vicki; Stapleton, Fiona

    2011-10-01

    To determine whether risk taking personality is associated with compliance in contact lens wear, and how practitioner perception of compliance compares with wearer risk taking and non-compliant behaviour. Optometrists in Australia, recruited through professional organizations, were asked to enroll up to 10 current contact lens wearers each. Wearers completed a questionnaire assessing risk-taking propensity (20-item instrument), non-compliant behaviour and demographics. Non-compliance was scored on four components (maximum score 40, lens disinfection, 20; hand hygiene, 8; case hygiene, 6; case replacement, 6). Independently, practitioners ranked each wearer's non-compliance on a 1-5 scale. Associations between wearer risk taking propensity, non-compliant behaviour and practitioner perceived non-compliance were investigated using Pearson correlation. Significant associations were entered into a linear regression model predicting overall non-compliant behaviour. Seventy-three wearers were recruited by 18 optometrists (mean 4, range 1-10). Wearer risk taking was associated with less compliance (p0.6) Linear regression indicated that risk taking was the only independent significant factor predicting non-compliance, explaining 24% of the variation in behaviour. A higher risk taking personality style of contact lens wearers in Australia is associated with less compliant behaviour. Risk taking is a better predictor of compliance than age, gender and practitioner perception and helps explain the individual characteristics of wearers that may influence lens care and maintenance. Copyright © 2010 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  6. Controversies in intraocular lens implantation in pediatric uveitis.

    Science.gov (United States)

    Phatak, Sumita; Lowder, Careen; Pavesio, Carlos

    2016-12-01

    Cataract is one of the most common and visually debilitating complications of pediatric uveitis. It develops as a consequence of chronic inflammation and steroid use and is seen most often in juvenile idiopathic arthritis (JIA)-associated uveitis. Cataract extraction with intraocular lens (IOL) insertion has been carried out with a measure of success in non-uveitic pediatric eyes, but in cases of uveitis, multiple factors affect the final outcome. Chronic inflammation and its sequelae such as band keratopathy, posterior synechiae, and cyclitic membranes make surgical intervention more challenging and outcome less certain. Postoperative complications like increased inflammation, glaucoma, posterior capsular opacification, retrolental membranes, and hypotony may compromise the visual outcome. Early refractive correction is imperative in pediatric eyes to prevent amblyopia. The use of contact lenses and intraocular lenses in pediatric uveitic eyes were fraught with complications in the past. Surgical interventions such as vitreo-lensectomy followed by contact lens fitting and small incision cataract surgery followed by different types of intraocular lenses have been utilized, and many reports have been published, albeit in small patient groups. This review analyzes and discusses the existing literature on intraocular lens implantation in cases of pediatric uveitic cataract surgery.

  7. Corneal Biomechanical Findings in Contact Lens Induced Corneal Warpage

    Science.gov (United States)

    Letafatnejad, Mojgan; Beheshtnejad, Amir Hooshang; Ghaffary, Seyed Reza; Hassanpoor, Narges; Yaseri, Mehdi

    2016-01-01

    Purpose. To evaluate the difference in biomechanical properties between contact lens induced corneal warpage and normal and keratoconic eyes. Method. Prospective observational case control study, where 94 eyes of 47 warpage suspicious and 46 eyes of 23 keratoconic patients were included. Warpage suspected cases were followed until a definite diagnosis was made (warpage, normal, or keratoconus). Results. 44 eyes of 22 patients had contact lens related corneal warpage. 46 eyes of 23 people were diagnosed as nonwarpage normal eyes. 46 eyes of 23 known keratoconus patients were included for comparison. The mean age of the participants was 23.8 ± 3.8 years, and 66.2% of the subjects were female. The demographic and refractive data were not different between warpage and normal groups but were different in the keratoconus group. The biomechanical properties (corneal hysteresis or CH and corneal resistance factor or CRF) were different with the highest value in the warpage group followed by normal and keratoconus groups. CRF was 10.08 ± 1.75, 9.23 ± 1.22, and 7.38 ± 2.14 and CH was 10.21 ± 1.57, 9.59 ± 1.21, and 8.69 ± 2.34 in the warpage, normal, and keratoconus groups, respectively. Conclusion. Corneal biomechanics may be different in people who develop contact lens induced warpage. PMID:27688908

  8. Outcomes of Sutureless Iris-Claw Lens Implantation

    Science.gov (United States)

    Nowomiejska, Katarzyna; Moneta-Wielgoś, Joanna; Jünemann, Anselm G. M.

    2016-01-01

    Purpose. To evaluate the indications, refraction, and visual and safety outcomes of iris-claw intraocular lens implanted retropupillary with sutureless technique during primary or secondary operation. Methods. Retrospective study of case series. The Haigis formula was used to calculate intraocular lens power. In all cases the wound was closed without suturing. Results. The study comprised 47 eyes. The mean follow-up time was 15.9 months (SD 12.2). The mean preoperative CDVA was 0.25 (SD 0.21). The final mean CDVA was 0.46 (SD 0.27). No hypotony or need for wound suturing was observed postoperatively. Mean postoperative refractive error was −0.27 Dsph (−3.87 Dsph to +2.85 Dsph; median 0.0, SD 1.28). The mean postoperative astigmatism was −1.82 Dcyl (min −0.25, max −5.5; median −1.25, SD 1.07). Postoperative complications were observed in 10 eyes. The most common complication was ovalization of the iris, which was observed in 8 eyes. The mean operation time was 35.9 min (min 11 min, max 79 min; median 34, SD 15.4). Conclusion. Retropupilary iris-claw intraocular lens (IOL) implantation with sutureless wound closing is an easy and fast method, ensuring good refractive outcome and a low risk of complication. The Haigis formula proved to be predictable in postoperative refraction. PMID:27642519

  9. Secure Storage Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2015-01-01

    The purpose of this report is to clarify the challenges associated with storage for secure enclaves. The major focus areas for the report are: - review of relevant parallel filesystem technologies to identify assets and gaps; - review of filesystem isolation/protection mechanisms, to include native filesystem capabilities and auxiliary/layered techniques; - definition of storage architectures that can be used for customizable compute enclaves (i.e., clarification of use-cases that must be supported for shared storage scenarios); - investigate vendor products related to secure storage. This study provides technical details on the storage and filesystem used for HPC with particular attention on elements that contribute to creating secure storage. We outline the pieces for a a shared storage architecture that balances protection and performance by leveraging the isolation capabilities available in filesystems and virtualization technologies to maintain the integrity of the data. Key Points: There are a few existing and in-progress protection features in Lustre related to secure storage, which are discussed in (Chapter 3.1). These include authentication capabilities like GSSAPI/Kerberos and the in-progress work for GSSAPI/Host-keys. The GPFS filesystem provides native support for encryption, which is not directly available in Lustre. Additionally, GPFS includes authentication/authorization mechanisms for inter-cluster sharing of filesystems (Chapter 3.2). The limitations of key importance for secure storage/filesystems are: (i) restricting sub-tree mounts for parallel filesystem (which is not directly supported in Lustre or GPFS), and (ii) segregation of hosts on the storage network and practical complications with dynamic additions to the storage network, e.g., LNET. A challenge for VM based use cases will be to provide efficient IO forwarding of the parallel filessytem from the host to the guest (VM). There are promising options like para-virtualized filesystems to

  10. Cosmic string lens effects on CMB polarization patterns

    Science.gov (United States)

    Benabed, K.; Bernardeau, F.

    2000-06-01

    Extending the Kaiser-Stebbins mechanism we propose here a method for detecting relics of topological defects such as cosmic strings based on lens-induced small-scale B-type polarization in the cosmic microwave background. Models of inflation, in which large-scale structures of the Universe emerge from the inflaton fluctuations, do not exclude the formation of topological defects at the end of the inflationary phase. In such a case, we show that the lens effect of a string on the small-scale E-type polarization of the cosmic microwave background induces a significant amount of B-type polarization along the line of sight. The amplitude of the effect is estimated for different resolutions of cosmic microwave background experiments.

  11. Bacterial assay of contact lens wearers.

    Science.gov (United States)

    Hart, D E; Hosmer, M; Georgescu, M; Farris, R L

    1996-03-01

    The goal of the project was to determine the quantity of bacteria on the contact lens and adjacent areas of the eye. This paper is a quantitative study of the contact lens and ocular aerobic microbiota in a mixed group of daily and extended wear disposable contact lens users. The contact lens, the lower fornix, tears collecting at the lower fornix, and edge of the lower lid at the Meibomian gland margin were assayed for the quantity of bacterial colony forming units (CFU). Eighteen patients wearing 49 disposable high water content hydrogel contact lenses were assayed and the mean lens age was 8.8 +/- 4.6 days. Three patients wore their lenses on a daily wear basis and 15 on an extended wear schedule. Tear samples were obtained with sterile microbial loops and the lens was macerated into small particles with a tissue grinder. The samples were poured onto the surface of chocolate agar plates and incubated at 35 degrees C for 48 h in 5% Co2. The lid margin revealed the greatest bacterial presence (mean = 9.7 CFU; median = 2 CFU; mode = 0 CFU). The lens showed the next greatest presence of CFU (mean = 4.5 CFU; median = 1 CFU; mode = 0). The fornix and tears revealed the least bacterial presence (fornix: mean = 2.6 CFU; median = 0 CFU; mode = 0 CFU). The bacteria were coagulase-negative staphylococci. The bacterial assay of disposable lens wearing contact lens subjects indicates that the lid margins are the greatest source of bacteria with the tears being the lowest. These studies support the concept that in the eye, the lens typically does not possess a large number of bacteria under normal conditions.

  12. Estimating hydraulic properties from tidal attenuation in the Northern Guam Lens Aquifer, territory of Guam, USA

    Science.gov (United States)

    Rotzoll, Kolja; Gingerich, Stephen B.; Jenson, John W.; El-Kadi, Aly I.

    2013-01-01

    Tidal-signal attenuations are analyzed to compute hydraulic diffusivities and estimate regional hydraulic conductivities of the Northern Guam Lens Aquifer, Territory of Guam (Pacific Ocean), USA. The results indicate a significant tidal-damping effect at the coastal boundary. Hydraulic diffusivities computed using a simple analytical solution for well responses to tidal forcings near the periphery of the island are two orders of magnitude lower than for wells in the island’s interior. Based on assigned specific yields of ~0.01–0.4, estimated hydraulic conductivities are ~20–800 m/day for peripheral wells, and ~2,000–90,000 m/day for interior wells. The lower conductivity of the peripheral rocks relative to the interior rocks may best be explained by the effects of karst evolution: (1) dissolutional enhancement of horizontal hydraulic conductivity in the interior; (2) case-hardening and concurrent reduction of local hydraulic conductivity in the cliffs and steeply inclined rocks of the periphery; and (3) the stronger influence of higher-conductivity regional-scale features in the interior relative to the periphery. A simple numerical model calibrated with measured water levels and tidal response estimates values for hydraulic conductivity and storage parameters consistent with the analytical solution. The study demonstrates how simple techniques can be useful for characterizing regional aquifer properties.

  13. Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-09-30

    Energy storage technology is critical if the U.S. is to achieve more than 25% penetration of renewable electrical energy, given the intermittency of wind and solar. Energy density is a critical parameter in the economic viability of any energy storage system with liquid fuels being 10 to 100 times better than batteries. However, the economical conversion of electricity to fuel still presents significant technical challenges. This project addressed these challenges by focusing on a specific approach: efficient processes to convert electricity, water and nitrogen to ammonia. Ammonia has many attributes that make it the ideal energy storage compound. The feed stocks are plentiful, ammonia is easily liquefied and routinely stored in large volumes in cheap containers, and it has exceptional energy density for grid scale electrical energy storage. Ammonia can be oxidized efficiently in fuel cells or advanced Carnot cycle engines yielding water and nitrogen as end products. Because of the high energy density and low reactivity of ammonia, the capital cost for grid storage will be lower than any other storage application. This project developed the theoretical foundations of N2 catalysis on specific catalysts and provided for the first time experimental evidence for activation of Mo 2N based catalysts. Theory also revealed that the N atom adsorbed in the bridging position between two metal atoms is the critical step for catalysis. Simple electrochemical ammonia production reactors were designed and built in this project using two novel electrolyte systems. The first one demonstrated the use of ionic liquid electrolytes at room temperature and the second the use of pyrophosphate based electrolytes at intermediate temperatures (200 – 300 ºC). The mechanism of high proton conduction in the pyrophosphate materials was found to be associated with a polyphosphate second phase contrary to literature claims and ammonia production rates as high as 5X 10

  14. Clinical Application of the Sapphire Unfolder Lens Injection System

    Institute of Scientific and Technical Information of China (English)

    Weiai Guo; Danying Zheng; Zhenyu Li; Yiyong Qian; Zhenping Zhang

    2002-01-01

    Purpose: To summarize the clinical experience of 300 cases using the Sapphire unfloder intraocular lens (IOL) injection system.Methods: After the standard phacoemulsification, an AR40e IOL was implanted using the Sapphire Unfolder. The involved problems during and after the operation were observed and analyzed.Results:The complications occurred during the operation including the crack at the haptic-optic junction in 2 cases, slight kink in the haptic in 5 cases, IOL clamp into the cartridge in 2 cases, posterior capsular rupture in 2 cases and endothelium damage in the central small area in 4 cases. All the patients recovered successfully with IOLs in good position.Conclusion: IOL implantation with the Sapphire Unfolder led to no serious complications and got the satisfactory results.

  15. The estimation of CO2 storage potential of gas-bearing shale complex at the early stage of reservoir characterization: the case of Baltic Basin (Poland).

    Science.gov (United States)

    Wójcicki, Adam; Jarosiński, Marek

    2017-04-01

    For the stage of shale gas production, like in the USA, prediction of the CO2 storage potential in shale reservoir can be performed by dynamic modeling. We have made an attempt to estimate this potential at an early stage of shale gas exploration in the Lower Paleozoic Baltic Basin, based on data from 3,800 m deep vertical well (without hydraulic fracking stimulation), supplemented with additional information from neighboring boreholes. Such an attempt makes a sense as a first guess forecast for company that explores a new basin. In our approach, the storage capacity is build by: (1) sorption potential of organic matter, (2) open pore space and (3) potential fracture space. the sequence. our estimation is done for 120 m long shale sequence including three shale intervals enriched with organic mater. Such an interval is possible to be fracked from a single horizontal borehole as known from hydraulic fracture treatment in the other boreholes in this region. The potential for adsorbed CO2 is determined from Langmuir isotherm parameters taken from laboratory measurements in case of both CH4 and CO2 adsorption, as well as shale density and volume. CO2 has approximately three times higher sorption capacity than methane to the organic matter contained in the Baltic Basin shales. Finally, due to low permeability of shale we adopt the common assumption for the USA shale basins that the CO2 will be able to reach effectively only 10% of theoretical total sorption volume. The pore space capacity was estimated by utilizing results of laboratory measurements of dynamic capacity for pores bigger than 10 nm. It is assumed for smaller pores adsorption prevails over free gas. Similarly to solution for sorption, we have assumed that only 10 % of the tight pore space will be reached by CO2. For fracture space we have considered separately natural (tectonic-origin) and technological (potentially produced by hydraulic fracturing treatment) fractures. From fracture density profile and

  16. Technology Roadmap: Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    Energy storage technologies are valuable components in most energy systems and could be an important tool in achieving a low-carbon future. These technologies allow for the decoupling of energy supply and demand, in essence providing a valuable resource to system operators. There are many cases where energy storage deployment is competitive or near-competitive in today's energy system. However, regulatory and market conditions are frequently ill-equipped to compensate storage for the suite of services that it can provide. Furthermore, some technologies are still too expensive relative to other competing technologies (e.g. flexible generation and new transmission lines in electricity systems). One of the key goals of this new roadmap is to understand and communicate the value of energy storage to energy system stakeholders. This will include concepts that address the current status of deployment and predicted evolution in the context of current and future energy system needs by using a ''systems perspective'' rather than looking at storage technologies in isolation.

  17. Hydrogen storage

    NARCIS (Netherlands)

    Peters, C.J.; Sloan, E.D.

    2005-01-01

    The invention relates to the storage of hydrogen. The invention relates especially to storing hydrogen in a clathrate hydrate. The clathrate hydrate according to the present invention originates from a composition, which comprises water and hydrogen, as well as a promotor compound. The promotor comp

  18. Southern company energy storage study :

    Energy Technology Data Exchange (ETDEWEB)

    Ellison, James; Bhatnagar, Dhruv; Black, Clifton; Jenkins, Kip

    2013-03-01

    This study evaluates the business case for additional bulk electric energy storage in the Southern Company service territory for the year 2020. The model was used to examine how system operations are likely to change as additional storage is added. The storage resources were allowed to provide energy time shift, regulation reserve, and spinning reserve services. Several storage facilities, including pumped hydroelectric systems, flywheels, and bulk-scale batteries, were considered. These scenarios were tested against a range of sensitivities: three different natural gas price assumptions, a 15% decrease in coal-fired generation capacity, and a high renewable penetration (10% of total generation from wind energy). Only in the elevated natural gas price sensitivities did some of the additional bulk-scale storage projects appear justifiable on the basis of projected production cost savings. Enabling existing peak shaving hydroelectric plants to provide regulation and spinning reserve, however, is likely to provide savings that justify the project cost even at anticipated natural gas price levels. Transmission and distribution applications of storage were not examined in this study. Allowing new storage facilities to serve both bulk grid and transmission/distribution-level needs may provide for increased benefit streams, and thus make a stronger business case for additional storage.

  19. Effect of storage media on human periodontal ligament cell apoptosis.

    Science.gov (United States)

    Chamorro, Mónica M; Regan, John D; Opperman, Lynne A; Kramer, Phillip R

    2008-02-01

    The ability of storage media to preserve periodontal ligament (PDL) cell vitality has been previously evaluated. However, the mechanisms by which different storage conditions alter the functional status of PDL cells have not been determined. The purpose of the present study was to investigate, in vitro, the level of programed cell death or apoptosis in a population of PDL cells following storage under different conditions. Primary human PDL cells were plated into 24-well-culture plates and allowed to attach for 24 h. Cells were then exposed for 1 h to milk, Hank's balanced salt solution (HBSS), Soft Wear contact lens solution or Gatorade at room temperature or on ice. Culture medium was used as a negative control. Apoptosis was evaluated at 24, 48, and 72 h after treatment on quadruplicate samples by using the ST 160 ApopTag Fluorescein Direct In Situ Detection Kit. The total number of cells and the total number of apoptotic cells were counted. The results indicated that at 24 and 72 h, PDL treated with Gatorade and the contact lens solution displayed the highest percentages of apoptotic cells when compared with the other treatment groups at room temperature. Overall, cells treated on ice showed significantly lower levels of apoptosis when compared with treatments at room temperature. In conclusion, the results indicated that apoptosis plays a major role in cell death in cells treated with Gatorade and contact lens solutions in comparison to other storage solutions and that storage on ice can inhibit programed cell death.

  20. PMMA lens with high efficiency and reliability

    Science.gov (United States)

    Matsuzaki, Ichiro; Abe, Koji; Fujita, Katsuhiro

    2013-09-01

    Polymethyl Methacrylate (PMMA) Fresnel lenses are increasingly being used in concentrated photovoltaic (CPV) systems installed outdoors and, accordingly, emphasis is being placed on the durability of such lenses with regard to light transmittance when subject to ultraviolet (UV) light and dust exposure. Accelerated testing methods for evaluating durability under UV exposure were established, allowing development of a lens material with improved UV resistance. Simultaneously, through a proprietary molding method, a Fresnel lens that boasts favorable light concentration efficiency with little deformation even after prolonged outdoor use was developed. Moreover, the lens incorporates a new hard-coat finish that possesses sand durability and UV resistance comparable to that of tempered glass.

  1. Elasticity of the eye's crystalline lens: A Brillouin light scattering study.

    Science.gov (United States)

    Bailey, S.; Gump, J.; Sooryakumar, R.; Jayaprakash, C.; Venkiteshwar, M. S.; Bullimore, M.; Twa, M.

    2009-03-01

    Focusing the eye on a near object results in an increase in its optical power brought about by contraction of the ciliary muscles and an increase in the lens surface curvature. Distant vision occurs when the muscular force flattens the lens. Central to the ability of the lens to alter shape are its mechanical properties. Thus, given that hardening of the lens would impede deformation and reduce its ability to undergo the changes required for accommodation, a noninvasive approach to measure the elastic properties of the lens is valuable. We present results of Brillouin scattering from bovine and human lenses (from the organ donor program at The Ohio State University) that measure their high frequency acoustic response. These measurements are conducted with a few milli-watts of laser power and, in the case of bovine lenses, from entire intact eye globes, allow the stiffness of the lens to be mapped across its cross-section. The results will be compared to values of the shear- and bulk-moduli determined from other techniques and the implications of differences in these moduli discussed.

  2. Sustainability through the Lens of Environmental Sociology: An Introduction

    Directory of Open Access Journals (Sweden)

    Md Saidul Islam

    2017-03-01

    Full Text Available Our planet is undergoing radical environmental and social changes. Sustainability has now been put into question by, for example, our consumption patterns, loss of biodiversity, depletion of resources, and exploitative power relations. With apparent ecological and social limits to globalization and development, current levels of consumption are known to be unsustainable, inequitable, and inaccessible to the majority of humans. Understanding and achieving sustainability is a crucial matter at a time when our planet is in peril—environmentally, economically, socially, and politically. Since its official inception in the 1970s, environmental sociology has provided a powerful lens to understanding the challenges, possibilities, and modes of sustainability. This editorial, accompanying the Special Issue on “sustainability through the Lens of Environmental Sociology”, first highlights the evolution of environmental sociology as a distinct field of inquiry, focusing on how it addresses the environmental challenges of our time. It then adumbrates the rich theoretical traditions of environmental sociology, and finally examines sustainability through the lens of environmental sociology, referring to various case studies and empirical analyses.

  3. Hologram stability evaluation for Microsoft HoloLens

    Science.gov (United States)

    Vassallo, Reid; Rankin, Adam; Chen, Elvis C. S.; Peters, Terry M.

    2017-03-01

    Augmented reality (AR) has an increasing presence in the world of image-guided interventions which is amplified by the availability of consumer-grade head-mounted display (HMD) technology. The Microsoft® HoloLensTM optical passthrough device is at the forefront of consumer technology, as it is the first un-tethered head mounted computer (HMC). It shows promise of effectiveness in guiding clinical interventions, however its accuracy and stability must still be evaluated for the clinical environment. We have developed an evaluative protocol for the HoloLensTM using an optical measurement device to digitize the perceived pose of the rendered hologram. This evaluates the ability of the HoloLensTM to maintain the hologram in its intended pose. The stability is measured when actions are performed that may cause a shift in the holograms' pose due to errors in its simultaneous localization and mapping. An emphasis is placed on actions that are more likely to be performed in a clinical setting. This will be used to determine the most applicable use cases for this technology in the future and how to minimize errors when in use. Our results show promise of this device's potential for intraoperative clinical use. Further analysis must be performed to evaluate other potential sources of hologram disruption.

  4. Flare and lens aberration requirements for EUV lithographic tools

    Science.gov (United States)

    Lee, Sang Hun; Shroff, Yashesh; Chandhok, Manish

    2005-05-01

    EUV lithographic tools can support the 32 nm MPU manufacturing node and beyond. In order to meet the stringent requirements on CD control and overlay for such technology generations, wavefront error and flare of the EUV exposure systems have to be well controlled. The cross field variations of wavefront errors and flare need to be in the acceptable range in order to improve the common Depth of Focus (DoF) across the field. The impacts of lens aberration and flare to the aerial image at the system level are studied for the 32nm MPU technology node using Intel's aerial image simulation tool. The focus control budget of the exposure tools has been estimated. Useable Depth of Focus (UDoF) has been defined, and focus margin between UDoF and focus control budget from the exposure tool has been calculated for various cases. Focus margin has been used to determine the flare and lens aberration requirements for the 32nm MPU node. It is found that <10% intrinsic flare and <0.75nm rms lens aberration are required for the 32nm MPU node. Process window as a measure of individual aberration terms for the 32nm node has been also investigated.

  5. Underground Storage Tanks - Storage Tank Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — A Storage Tank Location is a DEP primary facility type, and its sole sub-facility is the storage tank itself. Storage tanks are aboveground or underground, and are...

  6. Oil Storage Facilities - Storage Tank Locations

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — A Storage Tank Location is a DEP primary facility type, and its sole sub-facility is the storage tank itself. Storage tanks are aboveground or underground, and are...

  7. Nevada test site underground storage tank number 12-13-1: Nevada division of emergency management case number H931130E corrective action unit 450. Closure report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The project site was identified as an abandoned Underground Storage Tank (UST) to be closed under the Department of Energy/Nevada Operations Office (DOE/NV) Environmental Restoration Division (ERD) Program during Fiscal Year 1993. The United States Environmental Protection Agency (EPA) requires that before permanent closure is completed an assessment of the site must take place. The Nevada Division of Environmental Protection (NDEP) requires assessment and corrective actions for a petroleum substance in the soil which exceeds 100 milligrams per kilogram (mg/kg). Subsequent to the tank removal, a hydrocarbon release was identified at the site. The release was reported to the NDEP by DOE/NV on November 30, 1993. Nevada Division of Environmental Management (NDEM) Case Number H931130E was assigned. This final closure report documents the assessment and corrective actions taken for the hydrocarbon release identified at the site. The Notification of Closure, EPA Form 7530-1 dated March 22, 1994, is provided in Appendix A. A 45-day report documenting the notification for a hydrocarbon release was submitted to NDEP on April 6, 1994.

  8. National hydrogen technology competitiveness analysis with an integrated fuzzy AHP and TOPSIS approaches: In case of hydrogen production and storage technologies

    Science.gov (United States)

    Lee, Seongkon; Mogi, Gento

    2017-02-01

    The demand of fossil fuels, including oil, gas, and coal has been increasing with the rapid development of developing countries such as China and India. U.S., Japan, EU, and Korea have been making efforts to transfer to low carbon and green growth economics for sustainable development. And they also have been measuring to cope with climate change and the depletion of conventional fuels. Advanced nations implemented strategic energy technology development plans to lead the future energy market. Strategic energy technology development is crucial alternative to address the energy issues. This paper analyze the relative competitiveness of hydrogen energy technologies in case of hydrogen production and storage technologies from 2006 to 2010. Hydrogen energy technology is environmentally clean technology comparing with the previous conventional energy technologies and will play a key role to solve the greenhouse gas effect. Leading nations have increasingly focused on hydrogen technology R&D. This research is carried out the relative competitiveness of hydrogen energy technologies employed by an integrated fuzzy analytic hierarchy process (Fuzzy AHP) and The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approaches. We make four criteria, accounting for technological status, R&D budget, R&D human resource, and hydrogen infra. This research can be used as fundamental data for implementing national hydrogen energy R&D planning for energy policy-makers.

  9. Lysosomal storage disorder in non-immunological hydrops fetalis (NIHF - more common than assumed? Report of four cases with transient NIHF and a review of the literature

    Directory of Open Access Journals (Sweden)

    Whybra Catharina

    2012-11-01

    Full Text Available Abstract Background Lysosomal storage disorders (LSD are a rare cause of non immunological hydrops fetalis (NIHF and congenital ascites. The reported incidence is about 1%. The incidence of idiopathic NIHF is estimated to be about 18%. Patients and methods We report four cases with transient hydrops fetalis resulting from LSD and performed a literature review on LSD with NIHF and congenital ascites in combination. Results At present, 12 different LSDs are described to be associated with NIHF or congenital ascites. Most patients had a family history of NIHF, where the preceding sibling had not been examined. A diagnostic approach to the fetus with NIHF due to suspected LSD either in utero or postnatal is suggested. Transient forms of NIHF and/or ascites in association with MPS IVA, MPS VII and NPC are described for the first time in this publication. Conclusions LSD should be considered in transient hydrops. Enzymatic studies in chorionic villous sample or amniotic cultured cells, once the most common conditions associated with fetal ascites or hydrops have been ruled out, are important. This paper emphasizes the fact that LSD is significantly higher than the estimated 1% in previous studies, which is important for genetic counseling as there is a high risk of recurrence and the availability of enzyme replacement therapy for an increasing number of LSD.

  10. A novel mutation in PNPLA2 causes neutral lipid storage disease with myopathy and triglyceride deposit cardiomyovasculopathy: a case report and literature review.

    Science.gov (United States)

    Kaneko, Kimihiko; Kuroda, Hiroshi; Izumi, Rumiko; Tateyama, Maki; Kato, Masaaki; Sugimura, Koichiro; Sakata, Yasuhiko; Ikeda, Yoshihiko; Hirano, Ken-Ichi; Aoki, Masashi

    2014-07-01

    Mutations in PNPLA2 cause neutral lipid storage disease with myopathy (NLSDM) or triglyceride deposit cardiomyovasculopathy (TGCV). We report a 59-year-old patient with NLSDM/TGCV presenting marked asymmetric skeletal myopathy and cardiomyovasculopathy. Skeletal muscle and endomyocardial biopsies showed cytoplasmic vacuoles containing neutral lipid. Gene analysis revealed a novel homozygous mutation (c.576delC) in PNPLA2. We reviewed 37 genetically-proven NLSDM/TGCV cases; median age was 30 years; distribution of myopathy was proximal (69%) and distal predominant (16%); asymmetric myopathy (right>left) was reported in 41% of the patients. Frequently-affected muscles were posterior compartment of leg (75%), shoulder girdle to upper arm (50%), and paraspinal (33%). Skeletal muscle biopsies showed lipid accumulation in 100% and rimmed vacuoles in 22%. Frequent comorbidities were cardiomyopathy (44%), hyperlipidemia (23%), diabetes mellitus (24%), and pancreatitis (14%). PNPLA2 mutations concentrated in Exon 4-7 without apparent genotype-phenotype correlations. To know the characteristic features is essential for the early diagnosis of NLSDM/TGCV. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Management and treatment of contact lens-related Pseudomonas keratitis

    Directory of Open Access Journals (Sweden)

    Willcox MD

    2012-06-01

    Full Text Available Mark DP WillcoxSchool of Optometry and Vision Science, University of New South Wales, Sydney, AustraliaAbstract: Pubmed and Medline were searched for articles referring to Pseudomonas keratitis between the years 2007 and 2012 to obtain an overview of the current state of this disease. Keyword searches used the terms "Pseudomonas" + "Keratitis" limit to "2007–2012", and ["Ulcerative" or "Microbial"] + "Keratitis" + "Contact lenses" limit to "2007–2012". These articles were then reviewed for information on the percentage of microbial keratitis cases associated with contact lens wear, the frequency of Pseudomonas sp. as a causative agent of microbial keratitis around the world, the most common therapies to treat Pseudomonas keratitis, and the sensitivity of isolates of Pseudomonas to commonly prescribed antibiotics. The percentage of microbial keratitis associated with contact lens wear ranged from 0% in a study from Nepal to 54.5% from Japan. These differences may be due in part to different frequencies of contact lens wear. The frequency of Pseudomonas sp. as a causative agent of keratitis ranged from 1% in Japan to over 50% in studies from India, Malaysia, and Thailand. The most commonly reported agents used to treat Pseudomonas keratitis were either aminoglycoside (usually gentamicin fortified with a cephalosporin, or monotherapy with a fluoroquinolone (usually ciprofloxacin. In most geographical areas, most strains of Pseudomonas sp. (≥95% were sensitive to ciprofloxacin, but reports from India, Nigeria, and Thailand reported sensitivity to this antibiotic and similar fluoroquinolones of between 76% and 90%.Keywords: Pseudomonas, keratitis, contact lens

  12. Hemispherical projection lens for insect behavior analysis

    Science.gov (United States)

    Aikio, Mika; Takalo, Jouni; Lempeä, Mikko; Vähäsöyrinki, Mikko

    2010-05-01

    Virtual reality projection systems have been used formerly to study if mammals, including humans, are able to act in or understand virtual environments. Insects have been more difficult to study in such circumstances, one of the factors being their large, almost hemispherical field of view. Designing such a projection system that is capable of fulfilling the full field of vision of an insect is a challenging task. Normally, when designing a photographic objective, one of the goals is to minimize field curvature in order to provide sharp image through the whole sensor surface. However, because the image surface in this case is a sphere, flat field is not desirable and the design task becomes an opposite of a typical camera lens. Introducing field curvature becomes mandatory. We have designed and built a system with satisfactory image quality throughout the whole spherical surface with reasonable number of lenses as an add-on for common digital projectors. The manufactured system is able to project an image to a solid angle of 11.95 steradians, and when compared to the whole sphere which is represented with a solid angle of 4π steradians, approximately 5 % of the total sphere area is not illuminated.

  13. Bionic intraocular lens with variable focus and integrated structure

    Science.gov (United States)

    Liang, Dan; Wang, Xuan-Yin; Du, Jia-Wei; Xiang, Ke

    2015-10-01

    This paper proposes a bionic accommodating intraocular lens (IOL) for ophthalmic surgery. The designed lens has a solid-liquid mixed integrated structure, which mainly consists of a support ring, elastic membrane, rigid lens, and optical liquid. The lens focus can be adjusted through the deformation of the lens front surface when compressed. The integrated structure of the IOL is presented, as well as a detailed description of the lens materials and fabrication process. Images under different radial pressures are captured, and the lens deformation process, accommodating range, density, and optical property are analyzed. The designed lens achieves a 14.6 D accommodating range under a radial pressure of 51.4 mN and a 0.24 mm alteration of the lens outer radius. The deformation property of the lens matches well with the characteristic of the eye and shows the potential to help patients fully recover their vision accommodation ability after the cataract surgery.

  14. Incisões relaxantes limbares ou incisões no meridiano mais curvo associadas a facoemulsificação com implante de lente intra-ocular multifocal: relato de três casos Limbal relaxing incision or the more curved meridian incision associated to phacoemulsification with multifocal intraocular lens implant: three case reports

    Directory of Open Access Journals (Sweden)

    Wilson Takashi Hida

    2008-04-01

    Full Text Available O implante de lentes intra-oculares (LIOs multifocais é um grande avanço na reabilitação de pacientes permitindo boa acuidade visual sem correção óptica para longe e perto. Contudo pacientes com alguns graus de astigmatismo corneano tem indicação limitada. Este artigo relata três pacientes que foram submetidas a facoemulsificação com implante de lentes intra-oculares multifocais (AcrySof® Restor®, Alcon Labs após incisão relaxante limbar (IRL no olho dominante e incisão no eixo mais curvo da topografia no olho contralateral. Não foi encontrado nenhuma análise relacionada a dominância ocular e relaxante limbar na literatura. Acredita-se que essa associação pode ampliar as indicações de implante das lentes intra-oculares multifocais em pacientes com astigmatismo corneano significativo, devendo-se confirmar esta possibilidade por meio de futuros estudos.The use of multifocal intraocular lenses (IOLs is a great advance in the treatment of patients with cataract allowing near and distance uncorrected visual acuity recovery. However patients with some degrees of corneal astigmatism have some limitations. We present 3 cases that were indicated for phacoemulsitfication and multifocal intraocular lens implant (AcrySof® Restor®, Alcon Labs after limbal relaxing incision (LRI in the dominant eye and axis topographic incision in the fellow eye. There was no similar case report in the literature. It is believed that this association can extend the indications for multifocal intraocular lens implants in patients with significant corneal astigmatism and this possibility should be confirmed by future studies.

  15. Dynamic heat transfer problems in a thermal storage unit with packed bed of encapsulated PCM. Analysis in the case of fusible alloy

    Energy Technology Data Exchange (ETDEWEB)

    Asahina, Tadashi; Kosaka, Mineo (Government Industrial Research Inst., Nagoya (Japan))

    1989-06-10

    It is important to know the dynamical properties of a heat storage unit for effective use of energy at low temperature for air conditioning and hot water supply. In the present study, in order to clarify a dynamical heat transfer characteristic of encapsulated heat storage unit in which a fusible alloy was packed as a phase change type heat storage material, temperature changes of the heat storage material and the heat transfer media injecting hot or cold air were measured and were compared with calculated results. Sn-Pb-Bi based molten Rose's alloy metal was poured into the cylindrical aluminum capsules of 20 mm in outside diameter, 1 mm in thickness and 20 mm in height. The packed bed was composed of 4430 capsules stacked in ten steps. Measured values of temperature change of the heat storage unit in the process of heat storage and radiation conformed sufficiently with calculated values, and thus showed that an assumed simple models in calculation were adequate. This heat storage unit with packed bed of encapsulated phase change material has comparatively sufficient characteristic of heat trantsient response and has a wider range of application as a higher efficient heat storage unit with constant temperature thermal output. 13 refs., 9 figs.

  16. Restoring lens capsule integrity enhances lens regeneration in New Zealand albino rabbits and cats.

    Science.gov (United States)

    Gwon, A; Gruber, L J; Mantras, C

    1993-11-01

    In studies conducted by numerous investigators for 150 years, lenses regenerated following endocapsular lens extraction in New Zealand albino rabbits have been irregular in shape, appearing primarily doughnut-shaped as a result of lack of lens growth at the site of the anterior capsulotomy and its adhesion to the posterior capsule. In the present study, we restored the lens capsule integrity by inserting a collagen patch at the time of surgery to seal the anterior capsulotomy and to improve the shape and structure of the regenerated lenses. We then filled the capsule bag with air to prevent adhesions between the anterior and posterior capsule and maintain capsule tautness and shape. Lens regeneration was first noted as early as one to two weeks. Regenerated lens filled approximately 50% of the capsule bag at two weeks and 100% by five weeks. Subsequent growth was in the anterior-posterior direction and measured by A-scan biometry. Lens thickness increased by 0.3 mm per month. The regenerated lenses were spherical with normal cortical structure and a nuclear opacity. In conclusion, restoration of lens capsular integrity with a collagen patch following endocapsular lens extraction enhanced the shape, structure, and growth rate of the regenerated lenses. In addition, lens regeneration was shown to occur in two cats.

  17. Conjunctival Microbiome Changes Associated With Soft Contact Lens and Orthokeratology Lens Wearing.

    Science.gov (United States)

    Zhang, Haikun; Zhao, Fuxin; Hutchinson, Diane S; Sun, Wenfeng; Ajami, Nadim J; Lai, Shujuan; Wong, Matthew C; Petrosino, Joseph F; Fang, Jianhuo; Jiang, Jun; Chen, Wei; Reinach, Peter S; Qu, Jia; Zeng, Changqing; Zhang, Dake; Zhou, Xiangtian

    2017-01-01

    Usage of different types of contact lenses is associated with increased risk of sight-threatening complications. Changes in the ocular microbiome caused by contact lens wear are suggested to affect infection development in those individuals. To address this question, this study compares conjunctival microbial communities in contact lens wearers with those in noncontact lens wearers. Paired-end sequencing of the V3 region of the 16S rRNA gene was used to characterize the bacterial communities on the conjunctival surfaces of contact lens wearers and nonwearers. No differences in microbial diversity were detected between contact lens wearers and nonwearers. Nevertheless, some slight microbe variability was evident between these two different groups. Bacillus, Tatumella and Lactobacillus abundance was less in orthokeratology lens (OKL) wearers than in nonwearers. In soft contact lenses (SCL) wearers, Delftia abundance decreased whereas Elizabethkingia levels increased. The difference in the SCL and nonwearer group was smaller than that in the OKL group. Variations in the conjunctival taxonomic composition between SCL wearers were larger than those in other groups. Sex differences in the conjunctival microbiota makeup were only evident among nonwearers. Even though there were slight percentage changes between contact lens wearers and nonwearers in some microbes, there were no differences in their diversity. On the other hand, contact lens usage might cause relative abundance of some taxa to change. Our results will help assess whether or not conjunctival microbiome changes caused by contact lens wear affect infection risk.

  18. Outcomes of Lensectomy in Hereditary Lens Subluxation

    Directory of Open Access Journals (Sweden)

    Mohammad-Hossein Dehghan

    2008-12-01

    Full Text Available

    PURPOSE: To evaluate the results of pars plana lensectomy in patients with hereditary lens subluxation. METHOD: Hospital records of patients with hereditary lens subluxation who had undergone pars plana lensectomy at Labbafinejad Medical Center, Tehran-Iran from 1996 to 2003 were reviewed. Patients with more than 6 months of follow up were included. Underlying disorders, best corrected visual acuity (BCVA before and after surgery, intraocular pressure (IOP, postoperative refraction and complications were evaluated. RESULTS: Overall, records of 87 eyes of 49 patients including 27 male and 22 female subjects were reviewed. Mean follow up duration was 20±18 months. Underlying disorders leading to lens subluxation included Marfan syndrome (79.5%, Weill-Marchesani syndrome (8.2%, simple ectopia lentis (8.2%, and homocystinuria (4.1%. The most common indication for surgery was non-correctable refractive error (92.1%. Mean BCVA was 1.13 LogMAR (20/250 preoperatively, which improved to 0.26 LogMAR (20/30-20/40 postoperatively (P < 0.001. BCVA better than 20/40 was achieved in 82.8% of cases after surgery. Angle-supported anterior chamber intraocular lens (ACIOL was implanted in

  19. Variable-focus cylindrical liquid lens array

    Science.gov (United States)

    Zhao, Wu-xiang; Liang, Dong; Zhang, Jie; Liu, Chao; Zang, Shang-fei; Wang, Qiong-hua

    2013-06-01

    A variable-focus cylindrical liquid lens array based on two transparent liquids of different refractive index is demonstrated. An elastic membrane divides a transparent reservoir into two chambers. The two chambers are filled with liquid 1 and liquid 2, respectively, which are of different refractive index. The micro-clapboards help liquid 1, liquid 2 and the elastic membrane form a cylindrical lens array. Driving these two liquids to flow can change the shape of the elastic membrane as well as the focal length. In this design, the gravity effect of liquid can be overcome. A demo lens array of positive optical power is developed and tested. Moreover, a potential application of the proposed lens array for autostereoscopic 3D displays is emphasized.

  20. Role of Aquaporin 0 in lens biomechanics

    Energy Technology Data Exchange (ETDEWEB)

    Sindhu Kumari, S.; Gupta, Neha [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); Shiels, Alan [Washington University School of Medicine, St. Louis, MO (United States); FitzGerald, Paul G. [Cell Biology and Human Anatomy, School of Medicine, University of California, Davis, CA (United States); Menon, Anil G. [University of Cincinnati College of Medicine, Cincinnati, OH (United States); Mathias, Richard T. [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States); Varadaraj, Kulandaiappan, E-mail: kulandaiappan.varadaraj@stonybrook.edu [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States)

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5{sup −/−}), AQP0 KO (heterozygous KO: AQP0{sup +/−}; homozygous KO: AQP0{sup −/−}; all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0{sup +/−} lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and

  1. Ensuring Safe Use of Contact Lens Solution

    Science.gov (United States)

    ... evaluating contact lens solutions and the development of Acanthamoeba keratitis, a rare but serious eye infection that's ... contact lenses to water has been associated with Acanthamoeba keratitis, a corneal infection that is resistant to ...

  2. Role of Aquaporin 0 in lens biomechanics.

    Science.gov (United States)

    Sindhu Kumari, S; Gupta, Neha; Shiels, Alan; FitzGerald, Paul G; Menon, Anil G; Mathias, Richard T; Varadaraj, Kulandaiappan

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5(-/-)), AQP0 KO (heterozygous KO: AQP0(+/-); homozygous KO: AQP0(-/-); all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0(+/-) lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and together they help to confer

  3. Veselago lens by photonic hyper-crystals

    CERN Document Server

    Huang, Zun

    2014-01-01

    An imaging system functioning as a Veselago lens has been proposed based on the novel concept of photonic "hyper-crystal" -- an artificial optical medium synthesizing the properties of hyperbolic materials and photonic crystals. This Veselago lens shows a nearly constant negative refractive index and substantially reduced image aberrations. It can find potential applications in photolithography and hot-spots detection of silicon-based integrated circuits.

  4. Lens Design Using Group Indices of Refraction

    Science.gov (United States)

    Vaughan, A. H.

    1995-01-01

    An approach to lens design is described in which the ratio of the group velocity to the speed of light (the group index) in glass is used, in conjunction with the more familiar phase index of refraction, to control certain chromatic properties of a system of thin lenses in contact. The first-order design of thin-lens systems is illustrated by examples incorporating the methods described.

  5. In vivo human crystalline lens topography

    OpenAIRE

    Ortiz, Sergio; Pérez Merino, Pablo; Gambra, Enrique; Castro, Alberto; Marcos, Susana

    2012-01-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye ...

  6. Environmental standards for intraocular lens implantation.

    Science.gov (United States)

    Crawford, B A; Kaufman, D V

    1984-02-01

    Successful implantation of prosthetic devices depends upon their freedom from postoperative inflammation and infection. Techniques and lessons learned in orthopaedic and other implant surgery should be applied to intraocular lens implantation. The avoidance of contamination by particles and micro-organisms is one essential principle of the surgical procedure. Practical steps are described to reduce both types of contamination. These measures taken together are recommended for adoption as a standard of environmental safety for lens implantation.

  7. A Spectrometer Based on Diffractive Lens

    Institute of Scientific and Technical Information of China (English)

    WANG Daoyi; YAN Yingbai; JIN Guofan; WU Minxian

    2001-01-01

    A novel spectrometer is designed based on diffractive lens. It is essentially a flat field spectrometer. All the focal points are along the optical axis. Besides, all the asymmetrical aberrations vanish in our mounting. Thus low aberration can be obtained. In this article a diffractive lens is modeled as a special grating and analyzed by using a grating-based method. And a stigmatic point is introduced to reduce the aberrations.

  8. Introduction to the development of intraocular lens

    Science.gov (United States)

    Li, Yifan; Peng, Runling; Hu, Shuilan; Wei, Maowei; Chen, Jiabi

    2013-08-01

    In order to cure the cataract disease or injuries in eyes, intraocular lens(IOL) has been studied all the time to replace the crystalline lens in human eyes. Researches on IOL are started early from 19th century, and it develops greatly in the hundreds years after. This article introduces several main kinds of IOLs that appear in the development history of IOL, and raises the double-liquid zoom IOL based on electrowetting, which will be the trend of IOL study.

  9. Evolution and the Calcite Eye Lens

    CERN Document Server

    Williams, Vernon L

    2013-01-01

    Calcite is a uniaxial, birefringent crystal, which in its optically transparent form, has been used for animal eye lenses, the trilobite being one such animal. Because of the calcite birefringence there is a difficulty in using calcite as a lens. When the propagation direction of incoming light is not exactly on the c-axis, the mages blur. In this paper, calcite blurring is evaluated, and the non-blurring by a crystallin eye lens is compared to a calcite one.

  10. Pigment Epithelium-derived Factor in Cataractous Aqueous Humor and Lens Epithelial Cells

    Institute of Scientific and Technical Information of China (English)

    Tian Liu; Yizhi Liu; Mingxing Wu

    2006-01-01

    Purpose:To study the characteristics of PEDF in cataractous aqueous humor and its expression in human lens epithelium.Methods:The PEDF concentration in the aqueous humor was measured by enzyme linked immunosorbent assay in senile (130cases) and congenital (18cases) cataract patients who underwent cataract phacoemulsification extraction surgery. Anterior lens capsular specimens were obtained from these patients to count lens epithelial cells(LEC) density. The Lens Opacities Classification System Ⅲ was used to classify the senile cataracts as cortical, nuclear, posterior subcapsular and mixed types of opacity, and quantitative analysis of the nuclear opacities was performed by Pentacam Scheimpflug imaging system. Anterior lens capsular specimens from another senile(10cases) and congenital (10cases) cataract were collected for immunofluorescence with polyclonal antibodies specific to human pigment epithelium-derived factor(PEDF).Results:The mean aqueous level of PEDF was(178. 9±87. 5)ng/ml, and there was negative linear correlation of PEDF level and age (r=0. 811, P < 0. 001) . In senile cases, the aqueous PEDF concentration decreased with increasing nuclear opacities(r=0. 447, P < 0.01 ), and the mean PEDF level in nuclear cataract was significantly lower than that in posterior subcapsular opacity (P < 0.01 ) . PEDF immunostaining was detected in LEC of all capsular specimens.Conclusion :The PEDF level in human aqueous humor is related to age, types of cataracts and lens opacity. PEDF also express in human LEC. The study results suggest PEDF may regulate and/or protect LEC by paracrine and autocrine, and lack of PEDF may play a role in cataractogenesis.

  11. A correlation of thin lens approximation to thick lens design by using context based method in optics education

    Science.gov (United States)

    Farsakoglu, O. F.; Inal Atik, Ipek; Kocabas, Hikmet

    2014-07-01

    The effect of Coddington factors on aberration functions has been analysed using thin lens approximation with optical glass parameters. The dependence of spherical aberration on Coddington shape factor for the various optical glasses in real lens design was discussed using exact ray tracing for the optics education and training purposes. Thin lens approximation and thick lens design are generally taught with only lecturing method. But, thick lens design is closely related to the real life. Hence, it is more appropriate to teach thin lens approximation and thick lens design with real-life context based approach. Context based teaching can be effective in solving problems in which the subject is very difficult and irrelevant. It also provides extensive evidence for optics education that students are generally unable to correctly apply the concepts of lens design to optical instruments currently used. Therefore, the outline of real-life context based thick lens design lessons were proposed and explained in detail considering thin lens approximation.

  12. Photon nanojet lens: design, fabrication and characterization

    Science.gov (United States)

    Xu, Chen; Zhang, Sichao; Shao, Jinhai; Lu, Bing-Rui; Mehfuz, Reyad; Drakeley, Stacey; Huang, Fumin; Chen, Yifang

    2016-04-01

    In this paper, a novel nanolens with super resolution, based on the photon nanojet effect through dielectric nanostructures in visible wavelengths, is proposed. The nanolens is made from plastic SU-8, consisting of parallel semi-cylinders in an array. This paper focuses on the lens designed by numerical simulation with the finite-difference time domain method and nanofabrication of the lens by grayscale electron beam lithography combined with a casting/bonding/lift-off transfer process. Monte Carlo simulation for injected charge distribution and development modeling was applied to define the resultant 3D profile in PMMA as the template for the lens shape. After the casting/bonding/lift-off process, the fabricated nanolens in SU-8 has the desired lens shape, very close to that of PMMA, indicating that the pattern transfer process developed in this work can be reliably applied not only for the fabrication of the lens but also for other 3D nanopatterns in general. The light distribution through the lens near its surface was initially characterized by a scanning near-field optical microscope, showing a well defined focusing image of designed grating lines. Such focusing function supports the great prospects of developing a novel nanolithography based on the photon nanojet effect.

  13. Lens Biology is a Dimension of Neurobiology.

    Science.gov (United States)

    Frederikse, Peter; Kasinathan, Chinnaswamy

    2017-02-04

    There is a second cell type in your body that expresses scores of the most intensively studied genes in neuroscience and exclusively shares critical interdependent modes of molecular regulation that include a network first described as responsible for the basic bifurcation of neuronal from non-neuronal gene expression in vertebrates. Neurons and lens cells are among the most ancient animal cell types, yet neurons have an exclusive status also attributed to roles underlying sensation, movement, and cognition. However, this status is challenged by cells in the lens of the eye. The extent and detail of internally consistent parallels with neuron biology now catalogued in their second native cell type in the lens provide a detailed model of interdependent neuron gene expression in lens development and non-neuronal role in vision. These comprehensive parallels identify the lens as a dimension of neurobiology and a fundamental new perspective on neurodevelopment and its disorders. Finally, this understanding identifies that hallmark neuronal gene expression and key modes of associated molecular regulation evolved in tandem in the lens.

  14. Vitreoretinal Surgery for Intraocular Lens Dislocated into the Vitreous Cavity

    Directory of Open Access Journals (Sweden)

    Dilek Özçelik Soba

    2015-04-01

    Full Text Available Objectives: To investigate the sex, age, accompanying eye examination findings, and the outcomes of vitreoretinal surgery (VRS for intraocular lens (IOL dislocated into the vitreous cavity. Materials and Methods: The medical records of 30 patients who underwent VRS for IOL dislocation into the vitreous cavity were retrospectively analyzed in this study. Preoperative and postoperative visual acuity, intraocular pressure, biomicroscopic, and posterior segment examination findings were assessed. Results: The average age of the patients was 63.1 (range: 38-83 years. Twenty-one patients were male (70% and 9 patients were female (30%. As etiologic causes, 18 cases (60% had late spontaneous dislocation, 5 cases (16.6% had dislocation after phacoemulsification surgery, 4 cases (13.3% had trauma, 2 cases (6.6% had previously undergone vitrectomy, and 1 case (3.3% had undergone YAG laser capsulotomy. VRS including 23-gauge triamcinolone-assisted pars plana vitrectomy, intraocular lens extraction, posterior hyaloid membrane removing, endolaser photocoagulation, and fluid-air exchange was performed. Posterior chamber IOL implantation on to the anterior capsule in 13 cases (43.3%, anterior chamber IOL implantation in 10 cases (33.3%, and scleral fixated posterior IOL implantation in 4 cases (13.3% were performed. The corrected visual acuity recorded at the last follow-up was better than the first visit in 23 cases (76.6%, the same in 5 eyes (16.6%, and worse in 2 eyes (6.6%. Conclusion: VRS combined IOL implantation is a successful surgery method for IOL dislocated into the vitreous cavity and can avoid poor visual outcomes. (Turk J Ophthalmol 2015; 45: 56-9

  15. Conservation through the economics lens.

    Science.gov (United States)

    Farley, Joshua

    2010-01-01

    Although conservation is an inherently transdisciplinary issue, there is much to be gained from examining the problem through an economics lens. Three benefits of such an approach are laid out in this paper. First, many of the drivers of environmental degradation are economic in origin, and the better we understand them, the better we can conserve ecosystems by reducing degradation. Second, economics offers us a when-to-stop rule, which is equivalent to a when-to-conserve rule. All economic production is based on the transformation of raw materials provided by nature. As the economic system grows in physical size, it necessarily displaces and degrades ecosystems. The marginal benefits of economic growth are diminishing, and the marginal costs of ecological degradation are increasing. Conceptually, we should stop economic growth and focus on conservation when the two are equal. Third, economics can help us understand how to efficiently and justly allocate resources toward conservation, and this paper lays out some basic principles for doing so. Unfortunately, the field of economics is dominated by neoclassical economics, which builds an analytical framework based on questionable assumptions and takes an excessively disciplinary and formalistic approach. Conservation is a complex problem, and analysis from individual disciplinary lenses can make important contributions to conservation only when the resulting insights are synthesized into a coherent vision of the whole. Fortunately, there are a number of emerging transdisciplines, such as ecological economics and environmental management, that are dedicated to this task.

  16. Mini-scleral Contact Lens for Management of Poor Visual Outcomes after Intrastromal Corneal Ring Segments Implantation in Keratoconus

    Science.gov (United States)

    Alipour, Fatemeh; Rahimi, Firoozeh; Hashemian, Mohammad Naser; Ajdarkosh, Zahra; Roohipoor, Ramak; Mohebi, Masoumeh

    2016-01-01

    Purpose: To evaluate the feasibility and efficacy of mini-scleral design (MSD) contact lenses to treat keratoconus patients who were unsatisfied with the results of corneal inlay. Methods: In this prospective interventional case series, 9 eyes of 6 keratoconus patients who were unsatisfied with the results of corneal inlay were fitted with MSD contact lenses. Demographic data, uncorrected visual acuity (UCVA), best spectacle-corrected visual acuity (BSCVA), and higher order aberrations (HOAs) were evaluated before contact lens fitting. Corrected visual acuity by placing the MSD contact lens with or without over-refraction, and HOAs were measured one hour after contact lens fitting. One month after contact lens wearing, corrected visual acuity by placing the MSD contact lens with over-refraction and possible contact lens related problems were assessed. Ocular comfort and contact lens handling problems were asked in follow-up visits. The data was analyzed using descriptive statistical tests. Results: Nine eyes of 6 patients were successfully fitted with the mini-scleral lens. Fitting was ideal in 7 eyes and acceptable in 2 eyes. Mean corrected visual acuity by placing the MSD lens without over-refraction was 0.09 (range, 0.00-0.15) LogMAR which was significantly better than the mean BSCVA of 0.38 (range, 0.2-0.6) LogMAR (P = 0.007). The mean root mean square (RMS) of third-order coma and trefoil significantly decreased after MSD contact lens fitting (P = 0.012 and P = 0.015, respectively); however, changes in the fourth-order spherical aberration were not statistically significant (P = 0.336). Conclusion: Mini-scleral contact lenses may be helpful in the management of visually unsatisfied patients after corneal inlay. PMID:27621780

  17. Pigment dispersion syndrome associated with intraocular lens implantation: a new surgical technique

    Science.gov (United States)

    Jordana, M Isabel Canut; Formigó, Daniel Pérez; González, Rodrigo Abreu; Reus, Jeroni Nadal

    2010-01-01

    Aims We report the case of a myopic patient who, after intraocular lens transplant in the posterior chamber, suffered elevated intraocular pressure due to pigment dispersion, with recurrent episodes of blurred vision. The patient was treated with a new surgical technique that can avoid potential iridolenticular contact. Methods Complete ophthalmologic examination and optical coherence tomography (OCT) of the anterior segment were performed. Results Contact between the pigmentary epithelium and the iris with an intraocular lens was revealed by utrasound biomicroscopy and OCT. In this case, Nd:YAG laser iridotomy and laser iridoplasty were not effective for iridolenticular separation and control of the pigment dispersion. We propose a new technique: stitches on the surface of the iris to obtain good iridolenticular separation and good intraocular pressure control. Conclusion Stitches on the iris surface should be considered as optional therapy in pigmentary glaucoma secondary to intraocular lens implantation. This surgical technique can avoid potential iridolenticular contacts more definitively. PMID:21151331

  18. Diagnostic Accuracy of Ultrasound in Detection of Traumatic Lens Dislocation

    Directory of Open Access Journals (Sweden)

    Seyed Hossein Ojaghi Haghighi

    2014-08-01

    Full Text Available Introduction: Traumatic eye injuries (TEI involved about 3% of cases referred to the emergency departments of developing countries. Lens dislocation is one of the critical cases of ophthalmic emergencies. The present study was aimed to evaluate the diagnostic accuracy of ultrasonography in detection of traumatic lens dislocation. Methods: In this cross-sectional study the findings of ultrasonography and orbital computed tomography (OCT of head and face trauma patients, referred to Imam Reza hospital, Tabriz, Iran, from July 2013 to June 2014, have been compared. The sensitivity, specificity, positive and negative likelihood ratio, positive and negative predictive value, and accuracy of ultrasonography were calculated. Cohen's kappa coefficient was presented to assess the agreement of ultrasonography with OCT findings. Results: One hundred thirty patients with the mean age of 35.4±18.0 were evaluated (75.4% male. Sensitivity and specificity of ultrasonography were 84.6% (95% Cl: 53.7-97.3 and 98.3% (95% Cl: 93.3- 99.7, respectively. Also, positive and negative likelihood ratio were calculated 49.5 (95% Cl: 12.3-199.4 and 0.15 (95% Cl: 0.04- 0.56, respectively. Cohen's kappa coefficient of 0.83 (95% Cl: 0.66-1.0; p<0.0001 was representative of excellent agreement of these two tests. Conclusion: The finding of this project was representative of 84.6% sensitivity, 98.3% specificity, and 96.9% accuracy of ultrasonography in detection of traumatic lens dislocation. It seems that in cases which OCT is not possible, ultrasonography could be an acceptable option to assess traumatic eye injuries.

  19. Using Airborne LiDAR and QuickBird Data for Modelling Urban Tree Carbon Storage and Its Distribution—A Case Study of Berlin

    Directory of Open Access Journals (Sweden)

    Johannes Schreyer

    2014-11-01

    Full Text Available While CO2 emissions of cities are widely discussed, carbon storage in urban vegetation has been rarely empirically analyzed. Remotely sensed data offer considerable benefits for addressing this lack of information. The aim of this paper is to develop and apply an approach that combines airborne LiDAR and QuickBird to assess the carbon stored in urban trees of Berlin, Germany, and to identify differences between urban structure types. For a transect in the city, dendrometric parameters were first derived to estimate individual tree stem diameter and carbon storage with allometric equations. Field survey data were used for validation. Then, the individual tree carbon storage was aggregated at the level of urban structure types and the distribution of carbon storage was analysed. Finally, the results were extrapolated to the entire urban area. High accuracies of the detected tree locations were reached with 65.30% for all trees and 80.1% for dominant trees. The total carbon storage of the study area was 20,964.40 t (σ = 15,550.11 t. Its carbon density equaled 13.70 t/ha. A general center-to-periphery increase in carbon storage was identified along the transect. Our approach methods can be used by scientists and decision-makers to gain an empirical basis for the comparison of carbon storage capacities between cities and their subunits to develop adaption and mitigation strategies against climate change.

  20. NGLW RCRA Storage Study

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Waters; R. Ochoa; K. D. Fritz; D. W. Craig

    2000-06-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) at the Idaho National Engineering and Environmental Laboratory contains radioactive liquid waste in underground storage tanks at the INTEC Tank Farm Facility (TFF). INTEC is currently treating the waste by evaporation to reduce the liquid volume for continued storage, and by calcination to reduce and convert the liquid to a dry waste form for long-term storage in calcine bins. Both treatment methods and activities in support of those treatment operations result in Newly Generated Liquid Waste (NGLW) being sent to TFF. The storage tanks in the TFF are underground, contained in concrete vaults with instrumentation, piping, transfer jets, and managed sumps in case of any liquid accumulation in the vault. The configuration of these tanks is such that Resource Conservation and Recovery Act (RCRA) regulations apply. The TFF tanks were assessed several years ago with respect to the RCRA regulations and they were found to be deficient. This study considers the configuration of the current tanks and the RCRA deficiencies identified for each. The study identifies four potential methods and proposes a means of correcting the deficiencies. The cost estimates included in the study account for construction cost; construction methods to minimize work exposure to chemical hazards, radioactive contamination, and ionizing radiation hazards; project logistics; and project schedule. The study also estimates the tank volumes benefit associated with each corrective action to support TFF liquid waste management planning.

  1. Repositioning a decentered intraocular lens with 4 haptics.

    Science.gov (United States)

    Liu, Jiewei; Liu, Wenjie; Jia, Yading; Al-Mohtaseb, Zaina N; Wang, Li

    2016-03-01

    We describe a technique to reposition a decentered 4-haptic intraocular lens (IOL). Using an ophthalmic viscosurgical device, the haptic with the worst distortion is dissected from the capsular bag and pulled outside the bag. The opposite haptic (180 degrees away) is also dissected and placed in front of the anterior capsule. The remaining 2 haptics are left in the capsular bag. With this repositioning, the 2 haptics in the bag limit the IOL movement, the 2 haptics outside the bag are no longer distorted, and the IOL is centered. We present 2 cases in which this technique was used to reposition decentered 4-haptic IOLs.

  2. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift

  3. Effect of infusion bottle height on lens power after lens refilling with and without a plug

    NARCIS (Netherlands)

    Koopmans, SA; Terwee, T; Haitjema, HJ; Kooijman, AC; Barkhof, J

    2003-01-01

    Purpose: To evaluate the influence of intraoperative infusion bottle height on the power of refilled pig lenses. Setting: Research Laboratory, Pharmacia Intraocular Lens Manufacturing Plant, Groningen, The Netherlands. Methods: This study comprised 2 groups of pig eyes. In 1 group, the lens was refi

  4. Gravitational binary-lens events with prominent effects of lens orbital motion

    Energy Technology Data Exchange (ETDEWEB)

    Park, H.; Han, C.; Choi, J.-Y. [Department of Physics, Institute for Astrophysics, Chungbuk National University, Cheongju 371-763 (Korea, Republic of); Udalski, A.; Szymański, M. K.; Kubiak, M.; Soszyński, I.; Pietrzyński, G.; Poleski, R.; Ulaczyk, K.; Pietrukowicz, P.; Kozłowski, S.; Skowron, J.; Wyrzykowski, Ł. [Warsaw University Observatory, Al. Ujazdowskie 4, 00-478 Warszawa (Poland); Gould, A.; Gaudi, B. S. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Beaulieu, J.-P. [Institut d' Astrophysique de Paris, UMR 7095 CNRS-Université Pierre and Marie Curie, 98bis Bd Arago, F-75014 Paris (France); Tsapras, Y. [Las Cumbres Observatory Global Telescope Network, 6740 Cortona Drive, Suite 102, Goleta, CA 93117 (United States); Depoy, D. L. [Department of Physics and Astronomy, Texas A and M University, College Station, TX 77843 (United States); Dong, Subo [Institute for Advanced Study, Einstein Drive, Princeton, NJ 08540 (United States); Collaboration: OGLE Collaboration; μFUN Collaboration; PLANET Collaboration; RoboNet Collaboration; and others

    2013-12-01

    Gravitational microlensing events produced by lenses composed of binary masses are important because they provide a major channel for determining physical parameters of lenses. In this work, we analyze the light curves of two binary-lens events, OGLE-2006-BLG-277 and OGLE-2012-BLG-0031, for which the light curves exhibit strong deviations from standard models. From modeling considering various second-order effects, we find that the deviations are mostly explained by the effect of the lens orbital motion. We also find that lens parallax effects can mimic orbital effects to some extent. This implies that modeling light curves of binary-lens events not considering orbital effects can result in lens parallaxes that are substantially different from actual values and thus wrong determinations of physical lens parameters. This demonstrates the importance of routine consideration of orbital effects in interpreting light curves of binary-lens events. It is found that the lens of OGLE-2006-BLG-277 is a binary composed of a low-mass star and a brown dwarf companion.

  5. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift c

  6. DISSECTING THE GRAVITATIONAL LENS B1608+656. I. LENS POTENTIAL RECONSTRUCTION

    NARCIS (Netherlands)

    Suyu, S. H.; Marshall, P. J.; Blandford, R. D.; Fassnacht, C. D.; Koopmans, L. V. E.; McKean, J. P.; Treu, T.

    2009-01-01

    Strong gravitational lensing is a powerful technique for probing galaxy mass distributions and for measuring cosmological parameters. Lens systems with extended source-intensity distributions are particularly useful for this purpose since they provide additional constraints on the lens potential ( m

  7. Studying integrated silicon-lens antennas for radio communication systems operated in the 60 GHz frequency band

    Science.gov (United States)

    Artemenko, A. A.; Mal'tsev, A. A.; Maslennikov, R. O.; Sevastyanov, A. G.; Ssorin, V. N.

    2013-01-01

    We consider the development of an integrated lens antenna for LAN radio communication systems operated in the 60 GHz frequency band. The antenna is an extended hemispherical silicon lens. On its flat surface, a microstrip antenna element is located. The use of silicon, which has a dielectric permittivity ɛ = 11.7, as the lens material ensures the maximum range of scanning angles for the minimum axial size of the lens. The approximate analytical formulas, which are used for initial calculations of the lens parameters, allow one to evaluate the basic parameters of the lens antenna integrated with the microstrip antenna element. For further optimizing the parameters of the lens and the antenna element, 3D simulation of the electromagnetic-field distribution was performed. Based on its results, we have developed and manufactured extended hemispherical silicon lenses, which had radii of 6 and 12 mm. The planar microstrip antenna element was manufactured by the low temperature co-fired ceramics (LTCC) technology. The results of simulation and experimental studies of the manufactured prototypes demonstrate that the developed lens antennas has directivities of 17.6 and 23.1 dBi for lenses with radii of 6 and 12 mm, respectively. In this case, the maximum beam deflection angle is achieved, which is equal to 55°, while the permissible decrease in the directivity is no more than 6 dBi compared with the case of a non-deflected beam. The obtained results show that the developed integrated lens antennas can find applications in high-speed radio communication systems operated in the millimeter-wave range.

  8. Posterior chamber phakic intraocular lens implantation for high myopia

    Directory of Open Access Journals (Sweden)

    Yan Ju

    2013-12-01

    Full Text Available AIM:To evaluate the efficacy, safety and stability of posterior chamber phakic intraocular lens implantation for the correction of high myopia.METHODS: Retrospective case review of 82 eyes (43 patients undergoing implantable Collamer lens (ICL placement by a single surgeon (Xiao-Wei Gao to correct preoperative mean spherical equivalents between -9.00 diopter (D and -23.00D. Main outcome measures included uncorrected visual acuity (UCVA, refraction, best spectacle-corrected visual acuity (BSCVA, endothelial cell density (ECD, intraocular pressure (IOP, lens transparency, postoperative uveitis. Visante anterior segment optical coherence tomography (AS-OCT was used to measure anterior chamber depth (ACD and the position of ICL.RESULTS:Mean follow-up was 6.54±3.26 months (range 3-12 months. Predictability of the manifest spherical equivalent (SE refraction to within ±1.00D was achieved in 88% of eyes and ±0.50D in 72.5% of eyes. The mean postoperative manifest SE refraction was -1.85±0.72D, with 96.34% of eyes maintaining or gaining ≥1 line(s of BSCVA. The mean 3-month postoperative ECD decreased but had no statistically difference compared with the preoperative ECD. Of the 7 eyes (8.54% with a mild transient increase in intraocular pressure (up to 30mmHg, none required a second surgical procedure or prolonged topical medication. There was no loss of lens transparency. Pigmented precipitates were observed in 5 eyes (6.09%. The mean preoperative ACD measured with AS-OCT was 3.28±0.14mm, three months after surgery, the mean ACD was 2.45±0.22mm. Anterior chamber depth showed a statistically significant reduction. One eye (1.22% had ICL spontaneous rotation, 81 eyes (98.78% of the lens remained correctly centered.CONCLUSION: The implantation of ICL is an effective surgical option for the management of high myopia. But its long time effect and safety still need more time to prove.

  9. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    Directory of Open Access Journals (Sweden)

    Ladan Espandar

    2011-01-01

    Full Text Available Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular lens (IOL. The hydrophilic design of the lens is optimized to address dysphotopsia while maintaining biocompatibility, optical clarity, resistance to damage, and resistance to biocontamination. Aspheric lenses decrease postoperative spherical aberration. The addition of the Softec lens provides clinicians with another option for IOL placement; however, randomized comparative studies of this lens to others already on the market remain to be completed.Keywords: hydrophilic acrylic intraocular lens, Softec HD intraocular lens, aspheric intraocular lens, IOL

  10. Monitoring of injected CO2 at two commercial geologic storage sites with significant pressure depletion and/or re-pressurization histories: A case study

    Directory of Open Access Journals (Sweden)

    Dayanand Saini

    2017-03-01

    The monitoring technologies that have been used/deployed/tested at both the normally pressured West Hastings and the subnormally pressured Bell Creek storage sites appear to adequately address any of the potential “out of zone migration” of injected CO2 at these sites. It would be interesting to see if any of the collected monitoring data at the West Hastings and the Bell Creek storage sites could also be used in future to better understand the viability of initially subnormally pressured and subsequently depleted and re-pressurized oil fields as secure geologic CO2 storage sites with relatively large storage CO2 capacities compared to the depleted and re-pressurized oil fields that were initially discovered as normally pressured.

  11. An improved spinning lens test to determine the stiffness of the human lens

    Science.gov (United States)

    Burd, H.J.; Wilde, G.S.; Judge, S.J.

    2011-01-01

    It is widely accepted that age-related changes in lens stiffness are significant for the development of presbyopia. However, precise details on the relative importance of age-related changes in the stiffness of the lens, in comparison with other potential mechanisms for the development of presbyopia, have not yet been established. One contributing factor to this uncertainty is the paucity and variability of experimental data on lens stiffness. The available published data generally indicate that stiffness varies spatially within the lens and that stiffness parameters tend to increase with age. However, considerable differences exist between these published data sets, both qualitatively and quantitatively. The current paper describes new and improved methods, based on the spinning lens approach pioneered by Fisher, R.F. (1971) ‘The elastic constants of the human lens’, Journal of Physiology, 212, 147–180, to make measurements on the stiffness of the human lens. These new procedures have been developed in an attempt to eliminate, or at least substantially reduce, various systematic errors in Fisher’s original experiment. An improved test rig has been constructed and a new modelling procedure for determining lens stiffness parameters from observations made during the test has been devised. The experiment involves mounting a human lens on a vertical rotor so that the lens spins on its optical axis (typically at 1000 rpm). An automatic imaging system is used to capture the outline of the lens, while it is rotating, at pre-determined angular orientations. These images are used to quantify the deformations developed in the lens as a consequence of the centripetal forces induced by the rotation. Lens stiffness is inferred using axisymmetric finite element inverse analysis in which a nearly-incompressible neo-Hookean constitutive model is used to represent the mechanics of the lens. A numerical optimisation procedure is used to determine the stiffness parameters

  12. Corneal topography and soft contact lens fit.

    Science.gov (United States)

    Young, Graeme; Schnider, Cristina; Hunt, Chris; Efron, Suzanne

    2010-05-01

    To determine which ocular topography variables affect soft contact lens fit. Fifty subjects each wore three pairs of soft lenses in random succession (Vistakon Acuvue 2, Vistakon Acuvue Advance, Ciba Vision Night & Day), and various aspects of lens fit were evaluated. The steeper base curves of each type were worn in one eye and the flatter base curves in the other eye. Corneal topography data were collected using a Medmont E300 corneal topographer (Camberwell, Australia). Corneal curvature, shape factor (SF), and corneal height were measured over a 10 mm chord and also over the maximum measurable diameter. These were measured in the horizontal, vertical, steepest, and flattest meridians. With each lens type, the steeper base curve provided the best fit on the greatest proportion of eyes and the significant differences in various aspects of fit were noted between base curves. For each lens type, there was no significant difference in mean K-reading between those eyes best fit with the steeper base curve and those eyes best fit with the flatter base curve. Two of the lenses showed a positive correlation between centration and horizontal corneal height (maximum), whereas one lens showed a negative correlation between centration and horizontal SF (SF = e). Several lenses showed a positive correlation between post-blink movement and horizontal or vertical corneal SF. The measurement of corneal topography using current Placido disc instrumentation allows a better prediction of soft lens fit than by keratometry, but it is not reliable enough to enable accurate selection of the best fitting base curve. Some correlations are evident between corneal measurements; however, trial fitting remains the method of choice for selection of soft lens base curve.

  13. Phacoemulsification using iris-hooks for capsular support in high myopic patient with subluxated lens and secondary angle closure glaucoma

    Directory of Open Access Journals (Sweden)

    Morris Brid

    2006-01-01

    Full Text Available We report an unusual case of angle closure glaucoma in a 78-year-old highly myopic female patient. The patient did not show any preoperative signs of subluxation of lens. However, the capsular bag was noted to be unstable during surgery. The patient was managed with phacoemulsification of lens using a novel method of iris hooks for stabilization of capsular bag during surgery.

  14. Critical Curves and Caustics of Triple-lens Models

    Science.gov (United States)

    Daněk, Kamil; Heyrovský, David

    2015-06-01

    Among the 25 planetary systems detected up to now by gravitational microlensing, there are two cases of a star with two planets, and two cases of a binary star with a planet. Other, yet undetected types of triple lenses include triple stars or stars with a planet with a moon. The analysis and interpretation of such events is hindered by the lack of understanding of essential characteristics of triple lenses, such as their critical curves and caustics. We present here analytical and numerical methods for mapping the critical-curve topology and caustic cusp number in the parameter space of n-point-mass lenses. We apply the methods to the analysis of four symmetric triple-lens models, and obtain altogether 9 different critical-curve topologies and 32 caustic structures. While these results include various generic types, they represent just a subset of all possible triple-lens critical curves and caustics. Using the analyzed models, we demonstrate interesting features of triple lenses that do not occur in two-point-mass lenses. We show an example of a lens that cannot be described by the Chang-Refsdal model in the wide limit. In the close limit we demonstrate unusual structures of primary and secondary caustic loops, and explain the conditions for their occurrence. In the planetary limit we find that the presence of a planet may lead to a whole sequence of additional caustic metamorphoses. We show that a pair of planets may change the structure of the primary caustic even when placed far from their resonant position at the Einstein radius.

  15. [Representation and mathematical analysis of human crystalline lens].

    Science.gov (United States)

    Tălu, Stefan; Giovanzana, Stefano; Tălu, Mihai

    2011-01-01

    The surface of human crystalline lens can be described and analyzed using mathematical models based on parametric representations, used in biomechanical studies and 3D solid modeling of the lens. The mathematical models used in lens biomechanics allow the study and the behavior of crystalline lens on variables and complex dynamic loads. Also, the lens biomechanics has the potential to improve the results in the development of intraocular lenses and cataract surgery. The paper presents the most representative mathematical models currently used for the modeling of human crystalline lens, both optically and biomechanically.

  16. Steady-State Diffusion of Water through Soft-Contact LensMaterials

    Energy Technology Data Exchange (ETDEWEB)

    Fornasiero, Francesco; Krull, Florian; Radke, Clayton J.; Prausnitz, JohnM.

    2005-01-31

    Water transport through soft contact lenses (SCL) is important for acceptable performance on the human eye. Chemical-potential gradient-driven diffusion rates of water through soft-contact-lens materials are measured with an evaporation-cell technique. Water is evaporated from the bottom surface of a lens membrane by impinging air at controlled flow rate and humidity. The resulting weight loss of a water reservoir covering the top surface of the contact-lens material is recorded as a function of time. New results are reported for a conventional hydrogel material (SofLens{trademark} One Day, hilafilcon A, water content at saturation W{sub 10} = 70 weight %) and a silicone hydrogel material (PureVision{trademark}, balafilcon A, W{sub 10} = 36 %), with and without surface oxygen plasma treatment. Also, previously reported data for a conventional HEMA-SCL (W{sub 10} = 38 %) hydrogel are reexamined and compared with those for SofLens{trademark} One Day and PureVision{trademark} hydrogels. Measured steady-state water fluxes are largest for SofLens{trademark} One Day, followed by PureVision{trademark} and HEMA. In some cases, the measured steady-state water fluxes increase with rising relative air humidity. This increase, due to an apparent mass-transfer resistance at the surface (trapping skinning), is associated with formation of a glassy skin at the air/membrane interface when the relative humidity is below 55-75%. Steady-state water-fluxes are interpreted through an extended Maxwell-Stefan diffusion model for a mixture of species starkly different in size. Thermodynamic nonideality is considered through Flory-Rehner polymer-solution theory. Shrinking/swelling is self-consistently modeled by conservation of the total polymer mass. Fitted Maxwell-Stefan diffusivities increase significantly with water concentration in the contact lens.

  17. Imaging characteristics of a volume holographic lens

    Science.gov (United States)

    Yang, Jing; Jiang, Zhu-qing; Xu, Zhi-qiang; Liu, Shao-jie; Sun, Ya-jun; Tao, Shi-quan

    2009-07-01

    A volume holographic grating lens can reconstruct the three-dimensional information by conducting multiple optical slicing of an object based on Bragg selectivity of the volume holographic grating. In this paper, we employ the point-spread function of volume holographic imaging system to theoretically analyze its imaging resolution. In the experiments, the volume holographic gratings are made with a spherical reference (SR) and a planar reference (PR), respectively, and used as volume holographic imaging lens in our imaging system. The longitudinal and lateral defocusing characteristics of volume holographic lens with SR and with PR are investigated experimentally by displacing the interested objects from original reference location, respectively. The effects of the parameters of the volume holographic lens on the longitudinal and lateral resolution are also discussed. The experimental results show that increasing the size of the volume holographic lens can improve the depth resolution, and in particular, it has greater influence on SR VHI. The lateral selectivity of SR VHI is more sensitive than that of PR VHI, and the Bragg degenerate diffraction of PR VHI on the y axis is obviously observed.

  18. Clinical observation on cataract with lens subluxation treated by phacoemulsification combined with intraocular lens implanta-tion%晶状体不全脱位白内障超声乳化手术临床观察

    Institute of Scientific and Technical Information of China (English)

    原文新; 曲端; 郭哲锋

    2013-01-01

    目的:观察超声乳化白内障吸出联合人工晶体植入术治疗晶状体不全脱位白内障的疗效及安全性。方法对56例(60眼)晶状体不全脱位白内障患者采用超声乳化白内障吸出术,人工晶状体固定方式采用睫状沟缝线固定或囊袋内植入,观察术后视力及并发症等情况。结果56例(60眼)病例脱位晶状体均顺利取出,并植入人工晶状体,视力均有不同程度提高。结论超声乳化白内障吸出联合人工晶状体植入术治疗晶状体不全脱位白内障是安全有效的。%Objective To observe the efficacy and safety of phacoe-mulsification combined with intraocular lens implantation for the treatment of cataract with lens subluxation. Methods 56cases (60eyes) cataract with lens subluxation were operated by phacoemulsification,intraocular lens were fixed in ciliary sulcus with sutures or implanted in the capsular bag. The visual acuity and the postoperative complications were observed and analyzed. Results 56 cases (60 eyes) cases of dislocated lens were removed successfully,with implantation of artificial lens,visual acuity was improved in different degree. Conclusion Phacoemulsifi-cation combined with intraocular lens implantation for the treatment of dislocated lens cataract is safe and effective.

  19. The Lens Staring You in the Face

    Science.gov (United States)

    vachon, R. W.

    2012-12-01

    When you are embedded in the minutia of a science, you and your collaborators don't need to be convinced that there are benefits to investigating your precise science. You are intrinsically invested. In fact, we spend so much time around each other that we create our own language. So many acronyms that we come to take for granted and topic relevant words, like "fractionate", are not common parlance. This is the case with any specialization, but when it becomes second nature to communicate your work with these norms, transmission breaks down, people tune out, and some audiences become frustrated. Media can cushion this separation, but what do you do when you are the one in front of the camera, and clarity and impact of a concept rests on your shoulders? Just as writing a peer review paper is an acquired skill, so is communicating to the ones who pay many of our salaries, taxpayers. Over the past three years I have worked intimately with publishers, networks and university outreach programs to refine my approach to communicating scientific knowledge to particular audiences. The road has positioned me as interviewee, motivational speaker for science, technology, engineering and math (STEM) in middle and high schools, and educational video series host. Media has their own standards. Personality and enthusiasm may be just as important as the journal into which your findings were published. This presentation will emphasize the audience-adjustable tenants that have stood the test of time to result in effective video communication. Additionally, preparation for and execution of different roles in front of the lens will be discussed.Communicating concepts on video

  20. Apoptosis in the lens anlage of the heritable lens aplastic mouse (lap mouse).

    Science.gov (United States)

    Aso, S; Tashiro, M; Baba, R; Sawaki, M; Noda, S; Fujita, M

    1998-08-01

    Adult homozygous lap mice show various eye abnormalities, such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode seems to develop normally. However, the lens vesicle progresses abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. We examined cell death in the lens anlage of this mutant. The lens anlagen of homozygous lap and normal mice from days 10 to 12 of gestation were observed by light microscopy after DNA end-labeling by immunohistochemistry and by transmission electron microscopy. By light microscopy, a slight frequency of cell death was detected in the lens anlage encircling the surface ectoderm and in the anlage or in the anlage of both homozygous lap mice and normal mice at day 10 of gestation. Cell death was seen in the lens anlage encircling the surface ectoderm in the normal mouse and sporadically in the anlage of the homozygous lap mouse at day 10.5 of gestation. Cell death was visible at the area of the lens vesicle attached to the surface ectoderm and encircling the surrounding surface ectoderm in the normal mouse, and in the lens anlage encircling the surface ectoderm and the apex areas of the lens anlage in the homozygous lap mouse at day 11 of gestation. At day 12 of gestation, almost no cell death was observed in the lens anlage of the normal mouse. However, extensive areas of cell death were still seen in the lens anlage at its apex, at the inner region, and encircling the surface ectoderm in the homozygous lap mouse. Electron microscopic observation showed that the dead cells observed in the lens anlagen by light microscopy in normal and lap mice are the result of apoptosis. In lap mice, cells with cytoplasmic condensation were observed mainly at days 10 and 10.5 of gestation. Many apoptotic bodies which had been phagocytosed by adjacent cells were seen predominantly at day 11 of gestation. At day 12 of

  1. Comparison of a hydrophilic and a hydrophobic apodized diffractive multifocal intraocular lens.

    NARCIS (Netherlands)

    Linden, J.W.M. van der; Meulen, I.J. van der; Mourits, M.P.; Lapid-Gortzak, R.

    2013-01-01

    To compare outcomes between a new design apodized diffractive hydrophilic multifocal intraocular lens (IOL) (Seelens MF; study group), and a well-known apodized diffractive hydrophobic multifocal IOL (SN6AD1; control group). A comparative case series comparing refractive and visual outcomes at dista

  2. Principal Succession: A View through the Lens of Mary Douglas' Grid and Group

    Science.gov (United States)

    Mills, Angela

    2012-01-01

    Scope and Method of Study: This Naturalistic Inquiry Case Study examines principal succession at two small, rural high schools through naturalistic inquiry presented through the lens of Mary Douglas' grid and group cultural typology. A grid and group cultural analysis survey was sent to all school employees then in-depth, follow-up interviews…

  3. Acanthamoeba Species Keratitis in a Soft Contact Lens Wearer Molecularly Linked to Well Water

    Directory of Open Access Journals (Sweden)

    Samira Mubareka

    2006-01-01

    Full Text Available Acanthamoeba species keratitis has been associated with soft contact lens wear. In the present report, an epidemiological link was established between the patient's isolate and well water from the home using molecular methods. To the authors' knowledge, this is the first case in Canada where such a link has been established. Primary care practitioners and specialists, including ophthalmologists and infectious diseases specialists, must maintain a high degree of clinical suspicion in soft contact lens wearers with keratitis unresponsive to conventional topical and systemic treatment.

  4. Lithium ion storage between graphenes

    Directory of Open Access Journals (Sweden)

    Chan Yue

    2011-01-01

    Full Text Available Abstract In this article, we investigate the storage of lithium ions between two parallel graphene sheets using the continuous approximation and the 6-12 Lennard-Jones potential. The continuous approximation assumes that the carbon atoms can be replaced by a uniform distribution across the surface of the graphene sheets so that the total interaction potential can be approximated by performing surface integrations. The number of ion layers determines the major storage characteristics of the battery, and our results show three distinct ionic configurations, namely single, double, and triple ion forming layers between graphenes. The number densities of lithium ions between the two graphenes are estimated from existing semi-empirical molecular orbital calculations, and the graphene sheets giving rise to the triple ion layers admit the largest storage capacity at all temperatures, followed by a marginal decrease of storage capacity for the case of double ion layers. These two configurations exceed the maximum theoretical storage capacity of graphite. Further, on taking into account the charge-discharge property, the double ion layers are the most preferable choice for enhanced lithium storage. Although the single ion layer provides the least charge storage, it turns out to be the most stable configuration at all temperatures. One application of the present study is for the design of future high energy density alkali batteries using graphene sheets as anodes for which an analytical formulation might greatly facilitate rapid computational results.

  5. An inverse and analytic lens design method

    CERN Document Server

    Lu, Yang

    2016-01-01

    Traditional lens design is a numerical and forward process based on ray tracing and aberration theory. This method has limitations because the initial configuration of the lens has to be specified and the aberrations of the lenses have to considered. This paper is an initial attempt to investigate an analytic and inverse lens design method, called Lagrange, to overcome these barriers. Lagrange method tries to build differential equations in terms of the system parameters and the system input and output (object and image). The generalized Snell's law in three dimensional space and the normal of a surface in fundamental differential geometry are applied. Based on the Lagrange method equations for a single surface system are derived which can perfectly image a point object.

  6. 3D printed helical antenna with lens

    KAUST Repository

    Farooqui, Muhammad Fahad

    2016-12-19

    The gain of an antenna can be enhanced through the integration of a lens, however this technique has traditionally been restricted to planar antennas due to fabrication limitations of standard manufacturing processes. Here, with a unique combination of 3D and 2D inkjet printing of dielectric and metallic inks respectively, we demonstrate a Fresnel lens that has been monolithically integrated to a non-planar antenna (helix) for the first time. Antenna measurements show that the integration of a Fresnel lens enhances the gain of a 2-turn helix by around 4.6 dB giving a peak gain of about 12.9 dBi at 8.8 GHz.

  7. Catadioptric aberration correction in cathode lens microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tromp, R.M. [IBM T.J. Watson Research Center, PO Box 218, Yorktown Heights, NY 10598 (United States); Kamerlingh Onnes Laboratory, Leiden Institute of Physics, Niels Bohrweg 2, 2333 CA Leiden (Netherlands)

    2015-04-15

    In this paper I briefly review the use of electrostatic electron mirrors to correct the aberrations of the cathode lens objective lens in low energy electron microscope (LEEM) and photo electron emission microscope (PEEM) instruments. These catadioptric systems, combining electrostatic lens elements with a reflecting mirror, offer a compact solution, allowing simultaneous and independent correction of both spherical and chromatic aberrations. A comparison with catadioptric systems in light optics informs our understanding of the working principles behind aberration correction with electron mirrors, and may point the way to further improvements in the latter. With additional developments in detector technology, 1 nm spatial resolution in LEEM appears to be within reach. - Highlights: • The use of electron mirrors for aberration correction in LEEM/PEEM is reviewed. • A comparison is made with similar systems in light optics. • Conditions for 1 nm spatial resolution are discussed.

  8. Louvre-Lens : le Louvre autrement

    OpenAIRE

    Audrey Bodéré

    2010-01-01

    ∙ Quels sont les enjeux du projet Louvre-Lens pour le Musée du Louvre ? Par ce projet, le Louvre participe tant à la politique de décentralisation qu’à une volonté de démocratisation culturelle, en allant à la rencontre de nouveaux publics. Mais le projet scientifique et culturel du Louvre-Lens (PSC) précise aussi que l'un des principaux défis est d'oser le « Louvre autrement ». La présentation des collections est donc repensée pour traduire le monde Louvre à Lens. Le lien entre le Louvre Par...

  9. Louvre-Lens : le Louvre autrement

    Directory of Open Access Journals (Sweden)

    Audrey Bodéré

    2010-04-01

    Full Text Available ∙ Quels sont les enjeux du projet Louvre-Lens pour le Musée du Louvre ? Par ce projet, le Louvre participe tant à la politique de décentralisation qu’à une volonté de démocratisation culturelle, en allant à la rencontre de nouveaux publics. Mais le projet scientifique et culturel du Louvre-Lens (PSC précise aussi que l'un des principaux défis est d'oser le « Louvre autrement ». La présentation des collections est donc repensée pour traduire le monde Louvre à Lens. Le lien entre le Louvre Par...

  10. Image watermarking against lens flare effects

    Science.gov (United States)

    Chotikawanid, Piyanart; Amornraksa, Thumrongrat

    2017-02-01

    Lens flare effects in various photo and camera software nowadays can partially or fully damage the watermark information within the watermarked image. We propose in this paper a spatial domain based image watermarking against lens flare effects. The watermark embedding is based on the modification of the saturation color component in HSV color space of a host image. For watermark extraction, a homomorphic filter is used to predict the original embedding component from the watermarked component, and the watermark is blindly recovered by differentiating both components. The watermarked image's quality is evaluated by wPSNR, while the extracted watermark's accuracy is evaluated by NC. The experimental results against various types of lens flare effects from both computer software and mobile application showed that our proposed method outperformed the previous methods.

  11. The Frontier Fields Lens Modeling Comparison Project

    CERN Document Server

    Meneghetti, M; Coe, D; Contini, E; De Lucia, G; Giocoli, C; Acebron, A; Borgani, S; Bradac, M; Diego, J M; Hoag, A; Ishigaki, M; Johnson, T L; Jullo, E; Kawamata, R; Lam, D; Limousin, M; Liesenborgs, J; Oguri, M; Sebesta, K; Sharon, K; Williams, L L R; Zitrin, A

    2016-01-01

    Gravitational lensing by clusters of galaxies offers a powerful probe of their structure and mass distribution. Deriving a lens magnification map for a galaxy cluster is a classic inversion problem and many methods have been developed over the past two decades to solve it. Several research groups have developed techniques independently to map the predominantly dark matter distribution in cluster lenses. While these methods have all provided remarkably high precision mass maps, particularly with exquisite imaging data from the Hubble Space Telescope (HST), the reconstructions themselves have never been directly compared. In this paper, we report the results of comparing various independent lens modeling techniques employed by individual research groups in the community. Here we present for the first time a detailed and robust comparison of methodologies for fidelity, accuracy and precision. For this collaborative exercise, the lens modeling community was provided simulated cluster images -- of two clusters Are...

  12. Critical Curves and Caustics of Triple-lens Models

    CERN Document Server

    Danek, Kamil

    2015-01-01

    Among the 25 planetary systems detected up to now by gravitational microlensing, there are two cases of a star with two planets, and two cases of a binary star with a planet. Other, yet undetected types of triple lenses include triple stars or stars with a planet with a moon. The analysis and interpretation of such events is hindered by the lack of understanding of essential characteristics of triple lenses, such as their critical curves and caustics. We present here analytical and numerical methods for mapping the critical-curve topology and caustic cusp number in the parameter space of $n$-point-mass lenses. We apply the methods to the analysis of four symmetric triple-lens models, and obtain altogether 9 different critical-curve topologies and 32 caustic structures. While these results include various generic types, they represent just a subset of all possible triple-lens critical curves and caustics. Using the analyzed models, we demonstrate interesting features of triple lenses that do not occur in two-p...

  13. The Preliminary Clinical Observation of Array Multifocal lntraocular Lens Implantation

    Institute of Scientific and Technical Information of China (English)

    Zhende Lin; Bo Feng; Yizhi Liu; Bing Cheng

    2001-01-01

    Purpose: To evaluate the clinical effects of implantation of Array multifocal intraocular lenses. Methods: Thirty-one cases (37 eyes) of cataract patients, including 15 males( 19 eyes)and 16 females( 18 eyes), were involved in this study. All patients underwent standard phacoemulsification with Array multifocal intraocular lens implantation. The complications during operation, postoperative distant visual acuity, near visual acuity,corneal curvature and visual symptoms were observed. Results: the mean value of best postoperative visual acuity was recorded as follows:uncorrected distant visual acuity was 0.8, the best-corrected distant visual acuity was 0.9, uncorrected near visual acuity was 0.5, near visual acuity with distant-corrected was 0.6, the best-corrected near visual acuity wss 0.9. The astigmatism of cornea was less than 1.5 D pre-operatively and post-operatively. One patient complained of glare. Conclusion: Array multifocal intraocular lens can provide good distant and near visual acuity. With observation of more cases and follow-up of longer time, we can draw a further conclusion. Eye Science 2001; 17: 57 ~ 60.

  14. Spatial Information Storage

    Directory of Open Access Journals (Sweden)

    Vladimir Markelov

    2013-01-01

    Full Text Available The article describes the spatial information storage, shows the features of spatial information and of such storage systems formation. Requirements for information storage technologies and for the data management in storage systems are determined. Cartographic information storage and updating features are shown. The article proves that intelligent solutions are the most efficient means of working with large amounts of spatial data.

  15. Microscopic analysis of an opacified OFT CRYL® hydrophilic acrylic intraocular lens

    Directory of Open Access Journals (Sweden)

    Bruna Vieira Ventura

    Full Text Available ABSTRACT A 51-year-old patient underwent posterior vitrectomy with perfluoropropane gas injection, phacoemulsification, and implantation of an Oft Cryl® hydrophilic acrylic intraocular lens (IOL because of traumatic retinal detachment and cataract in the right eye. On the first postoperative day, gas was filling the anterior chamber because of patient's non-compliance in terms of head positioning, and was reabsorbed within one week. Eight months later, the patient returned complaining of a significant decrease in vision. IOL opacification was noticed by slit-lamp examination. The lens was explanted to undergo gross and light microscopic analysis. The lens was also stained with the alizarin red method for calcium identification. Light microscopic analysis confirmed the presence of granular deposits, densely distributed in an overall circular pattern in the central part of the lens optic. The granules stained positive for calcium. This is the first case of the opacification of this type of hydrophilic lens. Surgeons should be aware of this potential postoperative complication, and the use of hydrophilic IOLs should be avoided in procedures involving intracameral gas because of the risk of IOL opacification.

  16. Microscopic analysis of an opacified OFT CRYL® hydrophilic acrylic intraocular lens.

    Science.gov (United States)

    Ventura, Bruna Vieira; MacLean, Kyle Douglas; Lira, Wagner; Oliveira, Daniele Mendes de; Ventura, Camila Vieira; Werner, Liliana

    2016-01-01

    A 51-year-old patient underwent posterior vitrectomy with perfluoropropane gas injection, phacoemulsification, and implantation of an Oft Cryl® hydrophilic acrylic intraocular lens (IOL) because of traumatic retinal detachment and cataract in the right eye. On the first postoperative day, gas was filling the anterior chamber because of patient's non-compliance in terms of head positioning, and was reabsorbed within one week. Eight months later, the patient returned complaining of a significant decrease in vision. IOL opacification was noticed by slit-lamp examination. The lens was explanted to undergo gross and light microscopic analysis. The lens was also stained with the alizarin red method for calcium identification. Light microscopic analysis confirmed the presence of granular deposits, densely distributed in an overall circular pattern in the central part of the lens optic. The granules stained positive for calcium. This is the first case of the opacification of this type of hydrophilic lens. Surgeons should be aware of this potential postoperative complication, and the use of hydrophilic IOLs should be avoided in procedures involving intracameral gas because of the risk of IOL opacification.

  17. Zooming into the Cosmic Horseshoe: new insights on the lens profile and the source shape

    CERN Document Server

    Bellagamba, Fabio; Metcalf, R Benton

    2016-01-01

    The gravitational lens SDSS J1148+1930, also known as the Cosmic Horseshoe, is one of the biggest and of the most detailed Einstein rings ever observed. We use the forward reconstruction method implemented in the lens fitting code Lensed to investigate with great detail the properties of the lens and of the background source. We model the lens with different mass distributions, focusing in particular on the determination of the slope of the dark matter component. The inherent degeneracy between the lens slope and the source size can be broken when we can isolate separate components of each lensed image, as in this case. For an elliptical power law model, $\\kappa(r) \\sim r^{-t}$, the results favour a flatter-than-isothermal slope with a maximum-likelihood value t = 0.08. Instead, when we consider the contribution of the baryonic matter separately, the maximum-likelihood value of the slope of the dark matter component is t = 0.31 or t = 0.44, depending on the assumed Initial Mass Function. We discuss the origin...

  18. FEM analysis of hot-pressing process of aspheric glass P-SK57 lens

    Science.gov (United States)

    Zhu, Yongjian; Na, Jingxin; Wang, Yu; Li, Anhu; Zhi, Yanan; Fan, Yufeng

    2013-09-01

    Lens molding has become the promising technique to conduct mass produce of aspheric glass lens. It overcomes some disadvantages of traditional grinding or turning methods, such as high cost, low efficiency, unstable accuracy, and so on. Up to now, the lens molding process has been looked on as one of the reliable methods in fabrication of aspheric glass lens. However, in real production, one has found that it's hard to control the molding parameters, e.g. molding temperature, molding period, molding speed and pressing pressure, etc. Therefore it's necessary to develop the specific molding processes for a certain glass material. In this paper, SCHOTT P-SK57 is adopted to carry out the lens molding analysis in order to achieve the relative processing parameters. The molding cases are analyzed based on three different temperatures of 510°C, 520°C, and 530°C, higher than transition point 493°C of P-SK57. Through continuous heating and pressing simulation, the results show that the best pressing temperature could be about 530°C, at which the residual stress is only 5.22MPa (with the molding speed of 0.1mm/s).

  19. Zooming into the Cosmic Horseshoe: new insights on the lens profile and the source shape

    Science.gov (United States)

    Bellagamba, Fabio; Tessore, Nicolas; Metcalf, R. Benton

    2017-02-01

    The gravitational lens SDSS J1148+1930, also known as the Cosmic Horseshoe, is one of the biggest and most detailed Einstein rings ever observed. We use the forward reconstruction method implemented in the lens-fitting code LENSED to investigate in great detail the properties of the lens and background source. We model the lens with different mass distributions, focusing in particular on the determination of the slope of the dark-matter component. The inherent degeneracy between the lens slope and the source size can be broken when we can isolate separate components of each lensed image, as in this case. For an elliptical power-law model, κ(r) ˜ r-t, the results favour a flatter-than-isothermal slope with a maximum-likelihood value of t = 0.08. Instead, when we consider the contribution of the baryonic matter separately, the maximum-likelihood value of the slope of the dark-matter component is t = 0.31 or t = 0.44, depending on the assumed initial mass function. We discuss the origin of this result by analysing in detail how the images and the sources change when the slope t changes. We also demonstrate that these slope values at the Einstein radius are not inconsistent with the recent forecast from the theory of structure formation in the ΛCDM model.

  20. Imaging of sub-surface nanostructures by dielectric planer cavity coupled microsphere lens

    Science.gov (United States)

    Guo, Minglei; Ye, Yong-Hong; Hou, Jinglei; Du, Bintao; Wang, Tian

    2017-01-01

    In this paper, a dielectric planar cavity between an object and a microsphere lens is fabricated and its effects on the imaging of sub-surface nanostructures have been studied. Using the dielectric planar cavity combined (DPCC) silica microsphere lens, our experimental results illustrate that the nanostructures of data-recorded Blu-ray disc can be clearly resolved. Optical images of the object with higher contrast and larger field of view (FOV) can be obtained, compared to the case when only a microsphere lens is used. For the 3.4 μm diameter microsphere lens combing a planar cavity with a thickness about 2.2 μm, the FOV is about 2.4 μm and the magnification is about 1.6. With the 3.4 μm diameter microsphere lens only, the FOV and magnification is 1.5 μm and 1.4 respectively. Theoretical analysis of the imaging properties is carried out by the characteristics of electric field distribution of microsphere lenses. The simulated results indicate that the dielectric planar cavity working as a Fabry-Pérot cavity can effectively enhance the coupling of optical information.

  1. Clinical Presentation and Antibiotic Susceptibility of Contact Lens Associated Microbial Keratitis

    Directory of Open Access Journals (Sweden)

    Hesam Hedayati

    2015-01-01

    Full Text Available Introduction. In recent years, the number of contact lens wearers has dramatically increased in Iran, particularly in youngsters. The purpose of current study was to assess the clinical presentation and antibiotic susceptibility of contact lens related microbial keratitis in Ahvaz, southwest of Iran. Methodology. A cross-sectional investigation of 26 patients (33 eyes with contact lens induced corneal ulcers who were admitted to Imam Khomeini Hospital, Ahwaz City, from June 2012 to June 2013 was done. In order to study microbial culture and susceptibility of corneal ulcers, all of them were scraped. Results. Eight samples were reported as sterile. Pseudomonas aeruginosa (80% in positive cultures was the most widely recognized causative organism isolated. This is followed by Staphylococcus aureus 12% and Enterobacter 8%. The results showed that 84% of the microorganism cases were sensitive to ciprofloxacin, while imipenem, meropenem, and ceftazidime were the second most effective antibiotics (76%. Conclusion. Results of current study show the importance of referring all contact lens wearers with suspected corneal infection to ophthalmologists for more cure. The corneal scraping culture and contact lens solution should be performed to guide antibiotic therapy.

  2. Analytic Models of Plausible Gravitational Lens Potentials

    Energy Technology Data Exchange (ETDEWEB)

    Baltz, Edward A.; Marshall, Phil; Oguri, Masamune

    2007-05-04

    Gravitational lenses on galaxy scales are plausibly modeled as having ellipsoidal symmetry and a universal dark matter density profile, with a Sersic profile to describe the distribution of baryonic matter. Predicting all lensing effects requires knowledge of the total lens potential: in this work we give analytic forms for that of the above hybrid model. Emphasizing that complex lens potentials can be constructed from simpler components in linear combination, we provide a recipe for attaining elliptical symmetry in either projected mass or lens potential.We also provide analytic formulae for the lens potentials of Sersic profiles for integer and half-integer index. We then present formulae describing the gravitational lensing effects due to smoothly-truncated universal density profiles in cold dark matter model. For our isolated haloes the density profile falls off as radius to the minus fifth or seventh power beyond the tidal radius, functional forms that allow all orders of lens potential derivatives to be calculated analytically, while ensuring a non-divergent total mass. We show how the observables predicted by this profile differ from that of the original infinite-mass NFW profile. Expressions for the gravitational flexion are highlighted. We show how decreasing the tidal radius allows stripped haloes to be modeled, providing a framework for a fuller investigation of dark matter substructure in galaxies and clusters. Finally we remark on the need for finite mass halo profiles when doing cosmological ray-tracing simulations, and the need for readily-calculable higher order derivatives of the lens potential when studying catastrophes in strong lenses.

  3. Photonic crystal based polarization insensitive flat lens

    Science.gov (United States)

    Turduev, M.; Bor, E.; Kurt, H.

    2017-07-01

    The paper proposes a new design of an inhomogeneous artificially created photonic crystal lens structure consisting of annular dielectric rods to efficiently focus both transverse electric and transverse magnetic polarizations of light into the same focal point. The locations of each individual cell that contains the annular dielectric rods are determined according to a nonlinear distribution function. The inner and outer radii of the annular photonic dielectric rods are optimized with respect to the polarization insensitive frequency response of the transmission spectrum of the lens structure. The physical background of the polarization insensitive focusing mechanism is investigated in both spatial and frequency domains. Moreover, polarization independent wavefront transformation/focusing has been explored in detail by investigating the dispersion relation of the structure. Corresponding phase index distribution of the lens is attained for polarization insensitive normalized frequency range of a/λ  =  0.280 and a/λ  =  0.300, where a denotes the lattice constant of the designed structure and λ denotes the wavelength of the incident light. We show the wave transformation performance and focal point movement dynamics for both polarizations of the lens structure by specially adjusting the length of the structure. The 3D finite-difference time domain numerical analysis is also performed to verifiy that the proposed design is able to focus the wave regardless of polarization into approximately the same focal point (difference between focal distances of both polarizations stays below 0.25λ) with an operating bandwidth of 4.30% between 1476 nm and 1541 nm at telecom wavelengths. The main superiorities of the proposed lens structure are being all dielectric and compact, and having flat front and back surfaces, rendering the proposed lens design more practical in the photonic integration process in various applications such as optical switch

  4. Residual stresses in LENS[reg] components using neutron diffraction and contour method

    Energy Technology Data Exchange (ETDEWEB)

    Rangaswamy, P. [Los Alamos National Laboratory, Materials Science and Technology, Los Alamos, NM 87545 (United States)]. E-mail: partha@lanl.gov; Griffith, M.L. [Sandia National Laboratories, Albuquerque, NM 87185 (United States); Prime, M.B. [Los Alamos National Laboratory, Materials Science and Technology, Los Alamos, NM 87545 (United States); Holden, T.M. [Los Alamos National Laboratory, Materials Science and Technology, Los Alamos, NM 87545 (United States); Rogge, R.B. [National Research Council of Canada, Chalk River Laboratories Chalk River, Ont., K0J 1J0 (Canada); Edwards, J.M. [Los Alamos National Laboratory, Materials Science and Technology, Los Alamos, NM 87545 (United States); Sebring, R.J. [Los Alamos National Laboratory, Materials Science and Technology, Los Alamos, NM 87545 (United States)

    2005-06-15

    During manufacturing of components by laser engineered net shaping (LENS[reg]), a solid freeform fabrication process, the introduction of residual stresses causes deformation or in the worst case, cracking. The origin is attributed to thermal transients encountered during solidification. In the absence of reliable predictive models for the residual stresses, measurements are necessary. Residual stresses were measured in LENS[reg] samples of 316 stainless steel and Inconel 718 having simple geometrical shapes by both neutron diffraction and the contour methods. The results by the two methods are compared and discussed in the context of the growth direction during the LENS[reg] process. Surprisingly, the residual stresses are practically uni-axial, with high stresses in the growth direction.

  5. Effect of pulsed hollow electron-lens operation on the proton beam core in LHC

    CERN Document Server

    Fitterer, Miriam; Valishev, Alexander

    2016-01-01

    Collimation with hollow electron beams is currently one of the most promising concepts for active halo control in the HL-LHC. In order to further increase the diffusion rates for a fast halo removal as e.g. desired before the squeeze, the electron lens (e-lens) can be operated in pulsed mode. In case of profile imperfections in the electron beam the pulsing of the e-lens induces noise on the proton beam which can, depending on the frequency content and strength, lead to emittance growth. In order to study the sensitivity to the pulsing pattern and the amplitude, a beam study (machine development MD) at the LHC has been proposed for August 2016 and we present in this note the preparatory simulations and estimates.

  6. [Iritis with destabilization of the intraocular pressure due to dislocation of a posterior chamber intraocular lens].

    Science.gov (United States)

    Handzel, D M

    2012-04-01

    This report concerns the case of a 67-year-old male patient who underwent uncomplicated phacoemulsification with implantation of a posterior chamber intraocular lens (IOL). After an interval of 2 months the patient developed iritis together with an uncontrollable increase in intraocular pressure. After a detailed examination a dislocated haptic of the IOL was identified as the cause of the symptoms. The dislocation had led to uveitis-glaucoma-hyphema syndrome although no hemorrhage was observed. In addition to this complication the haptic had arroded the zonular complex which made implantation of an anterior chamber lens necessary. Although improvements in operating techniques, lens materials and designs have been made uveitis-glaucoma-hyphema syndrome has to be kept in mind. Surgical intervention is the only therapeutic option.

  7. New Management of Malignant Glaucoma by Phacoemulsification with Posterior Chamber Foldable Intraocular Lens Implantation

    Institute of Scientific and Technical Information of China (English)

    GeJian; GuoY

    1999-01-01

    Objective:To investigate the feasibility of phacoemulsification with posterior chamber foldable intraocular lens implantation in the management of malignant glaucoma. Patients and Methods:Fourteen patients with malignant glaucoma diagnosed in the Department of Glaucoma were enrolled in the study.12 patients developed malignant glaucoma after filtration surgery.1 developed after peripheral iridectomy.1 patient developed malignant glaucoma without any clear cause.Cataract phacoemulsification was performed.Posterior chamber intraocular foldable lens was implanted in 10 cases of patients.Results:All 14 patients were cured wiht normal intraocular pressure,normal anterior chamber depth and increased visual acuity.Conclusion:Phacoemulsification with posterior chamber foldable intraocular lens implantation is a good alternative in treating malignant glaucoma.

  8. Pulse transformer for the AA lithium lens

    CERN Multimedia

    1980-01-01

    The antiprotons emanating from the target were initially focused by a magnetic horn. Later on, a Li-lens was used during operation for the SPS collider, until 1992. A Li-rod (130 mm long, 34 mm in diameter) constituted the secondary of a 1:23 pulse-transformer. The half-sine pulse rose to 1000 kA in 900 microsec. The angular acceptance was 95 mrad. In operation after 1992, for LEAR only, a more modest Li-lens was used (155 mm long, diameter 20 mm, 480 kA, risetime 240 microsec, angular acceptance 75 mrad).

  9. Fundamentals of concentric lens systems synthesis

    Science.gov (United States)

    Ezhova, Kseniia; Zverev, Victor; Tochilina, Tatiana; Tymoshchuk, Irina

    2016-09-01

    Introduction of coefficients defining the relationship of the radii of curvature of the surfaces of concentric optical systems, allowed the transformation of the obtained analytical relations in a system of two equations with two unknowns. It is shown that the existence of the solution of the system of equations determined by the optical constants of the selected lens material. The results of the analysis of the conditions of the chromatic aberration correction position and the sequence of obtaining of the system equations define the theoretical basis of the engineering method of parametric synthesis of concentric lens systems. Application of the developed method is illustrated by examples of calculation particular systems design build.

  10. Feasibility study for the partial conversion of a hydropower plant into a pumped-storage power plant: a case study of hydroelectric power plant La Barca (Asturias, Spain

    Directory of Open Access Journals (Sweden)

    E. Antuña Yudego

    2017-01-01

    Full Text Available Renewable energy sources have reported an unprecedented increase of global installed renewable power capacity. Against the advantages provided by this renewable power generation technology it should be taken into account an important issue: these intermittent energy sources supply a fluctuating output which is difficult to manage. Pumped-storage hydro power plants reappear in these circumstances as an efficient form of energy storage which allows to use reserves when necessary, enabling power generation output to cover continuously this energy demand. The present paper shows a simplified feasibility study of the partial conversion of hydropower plant La Barca, in Asturias, into a reversible storage through the development of an algorithm to simulate its operation according to electricity market prices. For this purpose, the operation in the deviation management market is considered and the technical modifications required for the conversion are shown. The estimation of costs and incomes present a feasible scenario.

  11. Immunochemical analyses of soluble lens proteins in some marine fishes

    Digital Repository Service at National Institute of Oceanography (India)

    Menezes, M.R.

    Soluble eye lens proteins of 10 fishes, belonging to the families Clupeidae, Hemirhamphidae, Lactaridae, Scombridae, Stromatidae, Psettodidae, Bothidae and Soleidae were studied by immunoelectrophoresis using the lens antiserum of Sardinella...

  12. Experimental Contact Lens to Prevent Glaucoma-Induced Blindness

    Science.gov (United States)

    ... Home Page An Experimental Contact Lens to Prevent Glaucoma-Induced Blindness By Sharon Reynolds Posted January 23, 2014 An experimental contact lens design releases a glaucoma medicine at a steady rate for up to ...

  13. Biomarker for Glycogen Storage Diseases

    Science.gov (United States)

    2017-07-03

    Fructose Metabolism, Inborn Errors; Glycogen Storage Disease; Glycogen Storage Disease Type I; Glycogen Storage Disease Type II; Glycogen Storage Disease Type III; Glycogen Storage Disease Type IV; Glycogen Storage Disease Type V; Glycogen Storage Disease Type VI; Glycogen Storage Disease Type VII; Glycogen Storage Disease Type VIII

  14. Lens autofluorescence is not increased at high altitude

    DEFF Research Database (Denmark)

    Kessel, Line; Kofoed, Peter Kristian; Zubieta-Calleja, Gustavo

    2010-01-01

    PURPOSE: To study the relation between ambient environmental ultraviolet radiation exposure and lens fluorescence. METHODS: Non-invasive lens fluorometry measurements were compared in healthy Bolivian and Danish subjects. Background ultraviolet radiation was 4.5 times higher in Bolivia than...... in Denmark. RESULTS: No significant differences in lens fluorescence or transmittance were found between Bolivian and Danish volunteers. CONCLUSION: Age-corrected lens fluorescence and transmittance were comparable for healthy participants living at high altitude near the equator and healthy volunteers...

  15. An Ultrasonic Lens Design Based on Prefractal Structures

    OpenAIRE

    Sergio Castiñeira-Ibáñez; Daniel Tarrazó-Serrano; Constanza Rubio; Pilar Candelas; Antonio Uris

    2016-01-01

    The improvement in focusing capabilities of a set of annular scatterers arranged in a fractal geometry is theoretically quantified in this work by means of the finite element method (FEM). Two different arrangements of rigid rings in water are used in the analysis. Thus, both a Fresnel ultrasonic lens and an arrangement of rigid rings based on Cantor prefractals are analyzed. Results show that the focusing capacity of the modified fractal lens is better than the Fresnel lens. This new lens is...

  16. Seasonal thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.; Kannberg, L.D.; Raymond, J.R.

    1984-05-01

    This report describes the following: (1) the US Department of Energy Seasonal Thermal Energy Storage Program, (2) aquifer thermal energy storage technology, (3) alternative STES technology, (4) foreign studies in seasonal thermal energy storage, and (5) economic assessment.

  17. Social acceptance of CO{sub 2} storage: Review of case studies and literature review; Aceptabilidad Social del Almacenamiento de CO{sub 2}: Revision de Estudios de Caso y Revision de la Literatura

    Energy Technology Data Exchange (ETDEWEB)

    Sola, R.; Oltra, C.; Sala, R.; Di Masso, M.

    2009-12-19

    Stake holder and public acceptance of CCS will play an important role in the efficient technology development. Together with socio-political acceptance, local acceptance could raise significant challenges to CCS deployment. The objective of the present work is to analyse the social acceptance of CO{sub 2} storage. First, we review the social science literature on local reactions and acceptance of risk technology projects. Lessons learned during these last decades around possible local reactions to risk technology facilities could help in the design of communication strategies for the context of CO{sub 2} storage. Second, we review different case studies of European CCS projects in which some strategy of public information, communication or engagement has been initiated from the promoters of the project. (Author) 26 refs.

  18. In-vitro analysis of the microbicidal activity of 6 contact lens care solutions

    Directory of Open Access Journals (Sweden)

    Hildebrandt Claudia

    2012-10-01

    Full Text Available Abstract Background Contact lens-related infections are often associated with inadequate contact lens hygiene, and therefore, contact lens care products should be able to sufficiently minimise the amount of pathogens that are responsible for these infections. In 2001, the EN ISO 14729 was introduced to ensure adequate disinfection efficacy of contact lens care solutions, but this norm has recently been criticised. Methods In this study, six frequently used contact lens care solutions were retested according to the Stand Alone Test of the EN ISO 14729 (2001. The Stand Alone Test is a quantitative suspension test. In addition, the products were tested in a modified setting adding an organic load. The load was a mixture of human blood serum, lysozyme, and mucine, which resembles tear fluid. Results The criteria of the Stand Alone Test recommended in EN ISO 14729 were only met by Aosept Plus. This 3% hydrogen-peroxide-based contact lens care solution attained a reduction factor of > 5 log units for bacteria and > 4 for fungi in all cases. Two further contact lens care solutions, Blue Vision and Optifree Replenish, met the criteria of a reduction factor of > 3 log units for bacteria and > 1 log unit for fungi, but only in the presence of artificial tear fluid. The three remaining products did not exhibit adequate disinfecting efficacy, at least against one of the tested microorganisms. Conclusions Through the observation that the artificial tear fluid used in this study influences the disinfecting efficacy of contact lens care solutions, especially that of multi-purpose solutions, in a different way than does albumin, mucine, or even the organic load suggested in EN ISO 14729, it becomes obvious that the test conditions in the EN ISO 14729 should be revised in order to create more realistic conditions, e.g., by using a more realistic artificial tear fluid. Furthermore, we suggest adapting the EN ISO 14729 to the European test hierarchy for chemical

  19. 21 CFR 886.4300 - Intraocular lens guide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens guide. 886.4300 Section 886.4300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4300 Intraocular lens guide. (a) Identification. An intraocular lens guide is a device...

  20. 21 CFR 886.5916 - Rigid gas permeable contact lens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rigid gas permeable contact lens. 886.5916 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5916 Rigid gas permeable contact lens. (a) Identification. A rigid gas permeable contact lens is a device intended to be worn...

  1. 21 CFR 800.10 - Contact lens solutions; sterility.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Contact lens solutions; sterility. 800.10 Section...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... ophthalmic use, including contact lens solutions, should be sterile. It is further evident that...

  2. Integrated management of organic wastes for remediation of massive tailings storage facilities under semiarid mediterranean climate type: efficacy of organic pork residues as study case

    Science.gov (United States)

    Ginocchio, Rosanna; Arellano, Eduardo; España, Helena; Gardeweg, Rosario; Bas, Fernando; Gandarillas, Mónica

    2016-04-01

    Remediation of large surface areas of massive mine wastes, such as tailings storage facilities (TSFs) is challenging, particularly when no topsoils have been stored for the mine closure stage. Worldwide, it has been demonstrated that the use of organic wastes as substrate amendments for remediation of hard rock mine wastes is a useful alternative to topsoils material. In the case of semi-arid climate conditions of north-central Chile, the copper mining industry has generated massive TSF (between 400 ha and 3,000 ha) which needs now to be properly closed according to recently established mine closure regulations. However, in most of the cases, there have been no topsoils savage that facilitate the initial stage of the site remediation. Industrial organic wastes (i.e. biosolids) are found in the area, but their availability is normally below the demand needed for remediation of TSFs and salt content is normally elevated, thus posing salinization risks to the substrate and negative plant growth. We focused on a large organic waste producing industry, the pork industry, whose growth has been restricted due to the limited possibilities for using pig slurries as amendments for croplands in north-central Chile and the strong odor generated, resulting in conflicts with local communities. Incorporation of pig slurries as amendments to post-operative TSFs has been scarcely evaluated at international level (i.e. Spain) and no evaluation at all exists for the solid organic fraction generated from pig slurry treatment plants (PSTP). In the present study, we evaluated the efficacy of both pig slurries (PS) and the solid fraction of PSTP (SF-PSTP) as tailings amendment for creating good plant productivity on TSFs located under semi-arid Mediterranean climate conditions in north-central Chile. A short-term greenhouse study was developed. Copper mine tailings were mixed either with PS (0, 40, 80, and 120 m3 ha-1) or SF-PSTP (0, 25, 50 and 75 t ha-1), distributed in 3 L pots, and

  3. Mycotoxin Contamination in Stored Maize and Groundnuts Based on Storage Practices and Conditions in Subhumid Tropical Africa: The Case of Kilosa District, Tanzania.

    Science.gov (United States)

    Magembe, K S; Mwatawala, M W; Mamiro, D P

    2016-12-01

    Experiments were conducted to assess the influence of storage practices on mycotoxin incidences in stored maize and groundnuts in Kilosa District, Eastern Central Tanzania. Factorial experiments were used to test the effects of processing, storage conditions, and protectants at 3-month intervals for 12 weeks. Temperature and relative humidity data were recorded by using data loggers. The differences among the treatment means were compared using Tukey's honestly significant difference test at 5% probability level. The log-linear model was used to determine the influence of weather on mycotoxin. Dried neem ( Azadirachta indica ) leaves significantly reduced fumonisin B1 (FB1) in stored maize. Levels of FB1 were significantly higher in maize heaped on the floor than in the other tested storage methods (P < 0.001). Similarly, aflatoxin levels were significantly higher in groundnuts stored in nylon bags than in the other tested methods (P < 0.001). The high concentration of mycotoxins at the study villages suggests that storage practices and weather conditions play major roles in mycotoxin production.

  4. Analysis on shift and rotation of intraocular lens after phakic collamer lens implantation

    National Research Council Canada - National Science Library

    Yuan-Yuan Lu; Na Yang; Xue-Dong Li; Jun Kong

    2016-01-01

    .... In 1993, Staar Surgical(A.G. Nidau)introduced a modified intraocular collamer lens(ICL)for the correction of high myopia, which emerged as a safe and effective operation for moderate or high myopia gradually...

  5. Avaliação do uso do anel endocapsular modificado em casos de subluxação traumática do cristalino Evaluation of the modified capsular tension ring in cases of traumatic lens subluxation

    Directory of Open Access Journals (Sweden)

    Daniela Meira Villano Marques

    2007-10-01

    implantation. The preoperative examination included best correct visual acuity (BCVA and the presence or absence of phacodonesis, lens decentration and vitreous prolapse. The postoperative evaluation included BCVA, the presence of pseudophacodonesis, PCIOL centration, necessity of vitrectomy and other complications. RESULTS: 21 eyes (95.45% had an improvement in BCVA. The preoperative examination disclosed phacodonesis in 11 eyes (50% and no eye presented pseudophacodonesis in the postoperative period. Preoperatively, symptomatic decentration was presented by 10 eyes (45.45% and 22 eyes (100% had no decentration after surgery. The preoperative examination revealed vitreous prolapse in the anterior chamber in 9 eyes (40.90%. Vitrectomy was required in 11 eyes (50%. CONCLUSIONS: The use of the MCTR resulted in a good centration of the capsular bag and the PC IOL in 22 eyes with traumatic cataract and loss of zonular support.

  6. Contact lens wear and microbial keratitis.

    Science.gov (United States)

    Ahuja, Markanday

    2002-11-01

    Common types of contact lens are hard, rigid gas-permeable or soft lenses. Most lenses are worn on a daily basis. Cosmetic lenses are worn for non-medical indications. Microbial keratitis, a rare but most significant complication is discussed in this article. Pseudomonas aeruginosa and staphylococci are the most common organisms cause infective keratitis. Fungi and acanthamoeba are also responsible. The causes of increased susceptibility to infection are poor lens hygiene, adhesion of bacteria to lens surface and hypoxia. Preventing measures to be taken while wearing contact lens are discussed in a nutshell. Ocular pain, conjunctival infection, photophobia, epiphora and reduced vision are some of the symptoms of corneal infection. Diagnostic laboratory investigations are to be carried out immediately when a microbial corneal ulcer is suspected. Acanthamoeba can be cultured from corneal scrapes. Immunologically based fluorescein labelling techniques appear to be more sensitive than simple staining. The treatment consists of medical and surgical intervention. Corneal thinning, descemetocele formation and perforation are possible complications.

  7. Application of optical polymers in lens design

    Science.gov (United States)

    Sultanova, Nina; Kasarova, Stefka; Nikolov, Ivan

    2016-03-01

    Optical, some thermal and elastic properties of optical polymers which are of importance in lens design are considered. Results are based on precise measurement of refraction of materials. Ultrasonic investigation of elastic moduli is carried out. Comparison to properties of Schott glasses is accomplished. Examples on the design of all-plastic and hybrid glass-plastic systems are presented.

  8. Testing and inspecting lens by holographic means

    Science.gov (United States)

    Hildebrand, Bernard P.

    1976-01-01

    Processes for the accurate, rapid and inexpensive testing and inspecting of oncave and convex lens surfaces through holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and said convex surfaces to be so tested.

  9. Lens testing using total internal reflection holography

    Science.gov (United States)

    Hildebrand, Bernard P.

    1976-12-14

    Accurate, rapid and inexpensive testing and inspecting of lens surfaces tugh holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and convex surfaces to be so tested.

  10. Contact lens rehabilitation following repaired corneal perforations

    Directory of Open Access Journals (Sweden)

    Sreenivas V

    2006-03-01

    Full Text Available Abstract Background Visual outcome following repair of post-traumatic corneal perforation may not be optimal due to presence of irregular keratometric astigmatism. We performed a study to evaluate and compare rigid gas permeable contact lens and spectacles in visual rehabilitation following perforating corneal injuries. Method Eyes that had undergone repair for corneal perforating injuries with or without lens aspiration were fitted rigid gas permeable contact lenses. The fitting pattern and the improvement in visual acuity by contact lens over spectacle correction were noted. Results Forty eyes of 40 patients that had undergone surgical repair of posttraumatic corneal perforations were fitted rigid gas permeable contact lenses for visual rehabilitation. Twenty-four eyes (60% required aphakic contact lenses. The best corrected visual acuity (BCVA of ≥ 6/18 in the snellen's acuity chart was seen in 10 (25% eyes with spectacle correction and 37 (92.5% eyes with the use of contact lens (p Conclusion Rigid gas permeable contact lenses are better means of rehabilitation in eyes that have an irregular cornea due to scars caused by perforating corneal injuries.

  11. Magnifying perfect lens with positive refraction

    CERN Document Server

    Tyc, Tomas

    2010-01-01

    We propose a device with a positive isotropic refractive index that creates a magnified perfect real image of an optically homogeneous three-dimensional region of space within geometrical optics. Its key ingredient is a new refractive index profile that can work as a perfect lens on its own, having a very moderate index range.

  12. Solar powered desalination system using Fresnel lens

    Science.gov (United States)

    Sales, M. T. B. F.

    2016-11-01

    The Philippines is surrounded by coastal areas and these areas can be a potential source for potable water. This study aims to design and construct a solar powered desalination system using Fresnel lens. The experimental study was conducted using polluted salt water for the sample and desalination was carried out using the designed system. The desalination system was composed of the solar concentrator, solar still and the condenser system. The Fresnel lens was made of acrylic plastic and was an effective solar concentrator. Solar stills made of dark colored glass bottles were effective in absorbing the solar energy. The condenser system made of polybutylene and polystyrene were effective in condensing the vapor at ambient temperature. The shortest time of vaporization of the salt water was at 293 sec and the optimum angle of position of the lens was 36.42°. The amount of condensate collected was directly proportional to the amount of salt water in the solar still. The highest mean efficiency of the designed set-up was 34.82%. The water produced by the solar powered desalination system using Fresnel lens passed the standards set by WHO (World Health Organization) for drinking water.

  13. Intraocular lens in a fighter aircraft pilot.

    OpenAIRE

    Loewenstein, A; Geyer, O; Biger, Y; Bracha, R; Shochat, I; Lazar, M.

    1991-01-01

    A pseudophakic pilot of the Israeli air force flying an F-15 (Eagle) aircraft was followed up for three years. He experienced about 100 flying hours, 5% of the time under high g stress. The intraocular lens did not dislocate and no complications were observed. It seems that flying high performance fighter aircraft is not contraindicated in pseudophakic pilots.

  14. High Accuracy Dual Lens Transmittance Measurements

    Science.gov (United States)

    2007-08-01

    measurement of lens transmission,” Metrologia 37, 603–605 (2000). 3. B. Munro, “Quantum information processing with light and its requirement for detectors...5. N. P. Fox, “Trap detectors and their properties,” Metrologia 28, 197–202 (1991). 5402 APPLIED OPTICS Vol. 46, No. 22 1 August 2007 6. S. L

  15. Analysis Countermeasure and Causes of Ureter Hard Lens Dififculties:Attch 93 Cases Report%输尿管硬镜进镜困难原因分析及对策:附93例报告

    Institute of Scientific and Technical Information of China (English)

    郭石磊; 陈从其; 林忠应

    2015-01-01

    Objective To explore the causes and treatment of dififculties in accessing into ureter during rigid ureteroscopy, for improveing the technical level.Methods Selected 852 cases underwent transurethral ureteroscopy, the data were evaluated retrospectively. 93 cases had difficulties in ureteroscope into ureter in operation, analyzed the reasons.Results Among 93 cases, 89 cases were completed successfully and 4 cases failed. 1 case was converted to open operation,3 cases were left with double J ureteral operation for the second surgery.ConclusionThe causes of dififculties in accessing into ureter during conventional adult ureteroscopy include the intramural ureteral stricture. The key to successful retrograde access to the rigid ureteroscope lies in the urologist′s operative skills.%目的:分析输尿管硬镜手术中进镜困难的原因以及处理方法,以提高输尿管硬镜的技术水平。方法选取我院输尿管中下段结石行输尿管镜钬激光碎石取石术患者852例,其中93例术中存在不同程度进镜困难,对其原因进行分析。结果针对不同的原因采用相应方法进镜,成功89例,失败4例,改开放手术1例,3例留置输尿管双J管后二期输尿管镜手术。结论输尿管进镜困难的原因主要为输尿管开口或壁内段狭窄等,熟练掌握相关技巧可以提高手术成功率。

  16. High Dk piggyback contact lens system for contact lens-intolerant keratoconus patients

    OpenAIRE

    Tomris Sengor; Sevda Aydin Kurna; Suat Aki; et al

    2011-01-01

    Tomris Sengor, Sevda Aydin Kurna, Suat Aki, Yelda ÖzkurtFatih Sultan Mehmet Training and Research Hospital, Istanbul, TurkeyBackground: The aim of the study was to examine the clinical success of high Dk (oxygen permeability) piggyback contact lens (PBCL) systems for the correction of contact lens intolerant keratoconus patients.Methods: Sixteen patients (29 eyes) who were not able to wear gas-permeable rigid lenses were included in this study. Hyper Dk silicone hydrogel (oxygen tran...

  17. Preventive role of lens antioxidant defense mechanism against riboflavin-mediated sunlight damaging of lens crystallins.

    Science.gov (United States)

    Anbaraki, Afrooz; Khoshaman, Kazem; Ghasemi, Younes; Yousefi, Reza

    2016-10-01

    The main components of sunlight reaching the eye lens are UVA and visible light exerting their photo-damaging effects indirectly by the aid of endogenous photosensitizer molecules such as riboflavin (RF). In this study, lens proteins solutions were incubated with RF and exposed to the sunlight. Then, gel mobility shift analysis and different spectroscopic assessments were applied to examine the structural damaging effects of solar radiation on these proteins. Exposure of lens proteins to direct sunlight, in the presence of RF, leads to marked structural crosslinking, oligomerization and proteolytic instability. These structural damages were also accompanied with reduction in the emission fluorescence of Trp and Tyr and appearance of a new absorption peak between 300 and 400nm which can be related to formation of new chromophores. Also, photo-oxidation of lens crystallins increases their oligomeric size distribution as examined by dynamic light scattering analysis. The above mentioned structural insults, as potential sources of sunlight-induced senile cataract and blindness, were significantly attenuated in the presence of ascorbic acid and glutathione which are two important components of lens antioxidant defense system. Therefore, the powerful antioxidant defense mechanism of eye lens is an important barrier against molecular photo-damaging effects of solar radiations during the life span. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Analysis of fiber lens with gradient index based on thin lens equivalence

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rui-feng; GE Chun-feng; LI Shi-chen

    2006-01-01

    Theoretical analysis of the fiber-lens TEC (Thermally Expended Core) /Coreless/GRIN (Graded-Index) based on thin lens equivalence is presented in this paper.On condition that the TEC part adjusts the waist radius of an incident Gaussian beam,that the coreless part controlls the space between the beam waist and the thin lens,and that the GRIN part acts as the thin lens with its focal length determined by fiber index distribution parameter g,the analytic expressions of the waist spot size and the working distance of the output Gaussian beam are derived,and the influence of the coreless fiber and the length of the GRIN fiber upon the fiber-lens parameter is discussed based on the numerical simulation results.It is concluded that,if a GRIN style fiber-lens is used as a collimator,the maximum of the spot waist can be up to 80 μm and the divergence angle of single-mode optical fiber can be reduced by 8 times.If it is applied to a MEMS device, the maximum working distance can be up to 3 mm.

  19. The validity of high-pass angular spectrum filter in solid immersion lens system

    Institute of Scientific and Technical Information of China (English)

    Zheng Chong-Wei; Dai Yu-Xing

    2005-01-01

    The focal field of a solid immersion lens (SIL) system with a high-pass angular spectrum filter is calculated by using a vector method. Numerical results show that for a radially (azimuthally) polarized input field, a high-pass angular spectrum filter can reduce the light-spot (dark-spot) size of the SIL system. For a linearly polarized input field,however, the focal field cannot be optimized and the optical storage density of the SIL system cannot be improved by using a simple high-pass filter, either.

  20. New optical architecture for holographic data storage system compatible with Blu-ray Disc™ system

    Science.gov (United States)

    Shimada, Ken-ichi; Ide, Tatsuro; Shimano, Takeshi; Anderson, Ken; Curtis, Kevin

    2014-02-01

    A new optical architecture for holographic data storage system which is compatible with a Blu-ray Disc™ (BD) system is proposed. In the architecture, both signal and reference beams pass through a single objective lens with numerical aperture (NA) 0.85 for realizing angularly multiplexed recording. The geometry of the architecture brings a high affinity with an optical architecture in the BD system because the objective lens can be placed parallel to a holographic medium. Through the comparison of experimental results with theory, the validity of the optical architecture was verified and demonstrated that the conventional objective lens motion technique in the BD system is available for angularly multiplexed recording. The test-bed composed of a blue laser system and an objective lens of the NA 0.85 was designed. The feasibility of its compatibility with BD is examined through the designed test-bed.