WorldWideScience

Sample records for lens capsule thickness

  1. Noncontact optical measurement of lens capsule thickness ex vivo

    Science.gov (United States)

    Ziebarth, Noel M.; Manns, Fabrice; Uhlhorn, Stephen; Parel, Jean-Marie

    2004-07-01

    Purpose: To design a non-contact optical system to measure lens capsule thickness in cadaver eyes. Methods: The optical system uses a 670nm laser beam delivered to a single-mode fiber coupler. The output of the fiber coupler is focused onto the tissue using an aspheric lens (NA=0.68) mounted on a motorized translation stage. Light reflected from the sample is collected by the fiber coupler and sent to a silicon photodiode connected to a power meter. Peaks in the power signal are detected when the focal point of the aspheric lens coincides with the capsule boundaries. The capsule thickness is proportional to the distance between successive peaks. Anterior and posterior lens capsule thickness measurements were performed on 13 human, 10 monkey, and 34 New Zealand white rabbit lenses. The cadaver eyes were prepared for optical measurements by bonding a PMMA ring on the sclera. The posterior pole was sectioned, excess vitreous was removed, and the eye was placed on a Teflon slide. The cornea and iris were then sectioned. After the experiments, the lenses were excised, placed in 10% buffered formalin, and prepared for histology. Results: Central anterior lens capsule thickness was 9.4+/-2.9μm (human), 11.2+/-6.6μm (monkey), and 10.3+/-3.6μm (rabbit) optically and 14.9+/-1.6μm (human), 17.7+/-4.9μm (monkey), and 12.6+/-2.3μm (rabbit) histologically. The values for the central posterior capsule were 9.4+/-2.9μm (human), 6.6+/-2.5μm (monkey), and 7.9+/-2.3μm (rabbit) optically and 4.6+/-1.4μm (human), 4.5+/-1.2μm (monkey), and 5.7+/-1.7μm (rabbit) histologically. Conclusions: This study demonstrates that a non-contact optical system can successfully measure lens capsule thickness in cadaver eyes.

  2. Elastic constants of the human lens capsule.

    Science.gov (United States)

    Fisher, R F

    1969-03-01

    1. A technique is described whereby the elasticity of the human lens capsule has been determined at birth and throughout life. This technique requires three separate determinations: (a) thickness; (b) stress and strain; (c) Poisson's ratio; (a) the capsule was clamped between accurately perforated ground glass plates and its thickness determined by noting the change in depth of focus between Latex spherules adhering to its upper and lower surfaces; (b) the undisturbed capsule was then placed in a specially designed glass distension apparatus and the relationship between volume and pressure recorded when it was distended with isotonic saline. The permeability of the capsule was also measured; (c) in some cases Poisson's ratio was determined by measuring the change of thickness of the capsule and the height to which it rose when distended with isotonic saline at different pressures. An apparatus was designed for this purpose.2. The average thickness of the anterior capsule increases from birth until about the 60th year but thereafter it decreases slightly.3. Poisson's ratio was about 0.47 for both cat and human capsule, and no significant variations with age in human capsule could be detected.4. Corrected volume pressure curves obeyed Hook's law almost to the point of capsule rupture.5. In childhood Young's Modulus of elasticity is about 6 x 10(7) dyn/cm(2) and decreases to 3 x 10(7) dyn/cm(2) at 60 and 1.5 x 10(7) dyn/cm(2) in extreme old age.6. The ultimate tensile stress was 2.3 x 10(7) dyn/cm(2) in young capsules and 0.7 x 10(7) dyn/cm(2) in old ones. The maximum percentage elongation was 29 per cent and independent of age.7. The implications of these findings are discussed in relation to(a) the mechanical properties of the lens capsule;(b) the ageing of the lens capsule and basement membranes; and(c) the decrease in elasticity of the lens capsule as a cause of presbyopia.

  3. Restoring lens capsule integrity enhances lens regeneration in New Zealand albino rabbits and cats.

    Science.gov (United States)

    Gwon, A; Gruber, L J; Mantras, C

    1993-11-01

    In studies conducted by numerous investigators for 150 years, lenses regenerated following endocapsular lens extraction in New Zealand albino rabbits have been irregular in shape, appearing primarily doughnut-shaped as a result of lack of lens growth at the site of the anterior capsulotomy and its adhesion to the posterior capsule. In the present study, we restored the lens capsule integrity by inserting a collagen patch at the time of surgery to seal the anterior capsulotomy and to improve the shape and structure of the regenerated lenses. We then filled the capsule bag with air to prevent adhesions between the anterior and posterior capsule and maintain capsule tautness and shape. Lens regeneration was first noted as early as one to two weeks. Regenerated lens filled approximately 50% of the capsule bag at two weeks and 100% by five weeks. Subsequent growth was in the anterior-posterior direction and measured by A-scan biometry. Lens thickness increased by 0.3 mm per month. The regenerated lenses were spherical with normal cortical structure and a nuclear opacity. In conclusion, restoration of lens capsular integrity with a collagen patch following endocapsular lens extraction enhanced the shape, structure, and growth rate of the regenerated lenses. In addition, lens regeneration was shown to occur in two cats.

  4. Regional multiaxial mechanical properties of the porcine anterior lens capsule.

    Science.gov (United States)

    David, G; Pedrigi, R M; Heistand, M R; Humphrey, J D

    2007-02-01

    The lens capsule of the eye plays fundamental biomechanical roles in both normal physiological processes and clinical interventions. There has been modest attention given to the mechanical properties of this important membrane, however, and prior studies have focused on 1-D analyses of the data. We present results that suggest that the porcine anterior lens capsule has a complex, regionally dependent, nonlinear, anisotropic behavior. Specifically, using a subdomain inverse finite element method to analyze data collected via a new biplane video-based test system, we found that the lens capsule is nearly isotropic (in-plane) near the pole but progressively stiffer in the circumferential compared to the meridional direction as one approaches the equator. Because the porcine capsule is a good model of the young human capsule, there is strong motivation to determine if similar regional variations exist in the human lens capsule for knowledge of such complexities may allow us to improve the design of surgical procedures and implants.

  5. MALDI-MS-imaging of whole human lens capsule.

    Science.gov (United States)

    Ronci, Maurizio; Sharma, Shiwani; Chataway, Tim; Burdon, Kathryn P; Martin, Sarah; Craig, Jamie E; Voelcker, Nicolas H

    2011-08-05

    The ocular lens capsule is a smooth, transparent basement membrane that encapsulates the lens and is composed of a rigid network of interacting structural proteins and glycosaminoglycans. During cataract surgery, the anterior lens capsule is routinely removed in the form of a circular disk. We considered that the excised capsule could be easily prepared for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry imaging (MALDI-MSI) analysis. MALDI-MSI is a powerful tool to elucidate the spatial distribution of small molecules, peptides, and proteins within tissues. Here, we apply this molecular imaging technique to analyze the freshly excised human lens capsule en face. We demonstrate that novel information about the distribution of proteins by MALDI-MSI can be obtained from this highly compact connective tissue, having no evident histo-morphological characteristics. Trypsin digestion carried out on-tissue is shown to improve MALDI-MSI analysis of human lens capsules and affords high repeatability. Most importantly, MALDI-MSI analysis reveals a concentric distribution pattern of proteins such as apolipoprotein E (ApoE) and collagen IV alpha-1 on the anterior surface of surgically removed lens capsule, which may indicate direct or indirect effects of environmental and mechanical stresses on the human ocular lens.

  6. Multiaxial mechanical behavior of the porcine anterior lens capsule.

    Science.gov (United States)

    Heistand, M R; Pedrigi, R M; Delange, S L; Dziezyc, J; Humphrey, J D

    2005-11-01

    The biomechanics of the lens capsule of the eye is important both in physiologic processes such as accommodation and clinical treatments such as cataract surgery. Although the lens capsule experiences multiaxial stresses in vivo, there have been no measurements of its multiaxial properties or possible regional heterogeneities. Rather all prior mechanical data have come from 1-D pressure-volume or uniaxial force-length tests. Here, we report a new experimental approach to study in situ the regional, multiaxial mechanical behavior of the lens capsule. Moreover, we report multiaxial data suggesting that the porcine anterior lens capsule exhibits a typical nonlinear pseudo-elastic behavior over finite strains, that the in situ state is pre-stressed multi-axially, and that the meridional and circumferential directions are principal directions of strain, which is nearly equi-biaxial at the pole but less so towards the equator. Such data are fundamental to much needed constitutive formulations.

  7. Perforation forces of the intact porcine anterior lens capsule.

    Science.gov (United States)

    Ullrich, Franziska; Lussi, Jonas; Felekis, Dimitrios; Michels, Stephan; Petruska, Andrew J; Nelson, Bradley J

    2016-09-01

    During the first step of cataract surgery, the lens capsule is perforated and a circular hole is created with a sharp instrument, a procedure called capsulorhexis. To develop automated systems that can assist ophthalmologists during capsulorhexis, the forces required must be quantified. This study investigates perforation forces of the central anterior lens capsule in porcine eyes, which are used as a conservative model for the human eye. A micro-mechanical characterisation method is presented that measures capsular bag perforation forces with a high precision positioning and high-resolution force sensing system. The force during perforation of the anterior lens capsule was measured with various sized needles and indentation speeds and is found to be 15-35mN. A bio-mechanical model is identified that describes an exponential correlation between indentation force and depth, indicating strain hardening behaviour of the porcine anterior lens capsule.

  8. Lens stem cells may reside outside the lens capsule: an hypothesis

    Directory of Open Access Journals (Sweden)

    Meyer Rita A

    2007-06-01

    Full Text Available Abstract In this paper, we consider the ocular lens in the context of contemporary developments in biological ideas. We attempt to reconcile lens biology with stem cell concepts and a dearth of lens tumors. Historically, the lens has been viewed as a closed system, in which cells at the periphery of the lens epithelium differentiate into fiber cells. Theoretical considerations led us to question whether the intracapsular lens is indeed self-contained. Since stem cells generate tumors and the lens does not naturally develop tumors, we reasoned that lens stem cells may not be present within the capsule. We hypothesize that lens stem cells reside outside the lens capsule, in the nearby ciliary body. Our ideas challenge the existing lens biology paradigm. We begin our discussion with lens background information, in order to describe our lens stem cell hypothesis in the context of published data. Then we present the ciliary body as a possible source for lens stem cells, and conclude by comparing the ocular lens with the corneal epithelium.

  9. Silicone Oil Tamponade Combined with Lensectomy Preserving Anterior Lens Capsule

    Institute of Scientific and Technical Information of China (English)

    LuL; YangJ

    1999-01-01

    Purpose:To investigate the therapeutic effect and indicatio n of silicone oil tamponade combined with lensectomy preserving anterior lens capsule.Methods:Silicone oil tamponade combined with lensectomy preserving anterior lens capsule was performed in 33 cases (33 eyes)of high myopia ,proliferative vitroretinopathy(PVR)D grade and giant retinal tear(GRT).10 cases were onlyeye and 11 cases had harder nucleus of lens.The surgical methods included:1.smashing lens nucleus and lensectomy preserving complete anterior capsule;2,vitrectomy and membrane peeling;3,usage of liquid perfluorocarbin or retinotomy or drainage;4.silicone oil tamponade;5.postoperative Nd;YAG laser for anterior capsulectomy. Results:Follow-up time was 6 months or more in 29 cases.Total retinal reattachment was achieved in 22 cases,macular retinal reattachment in 5 cases.The visual acuity was 20/800 to 20/200 in 13 cases,20/100 to 20/50 in 12 cases.Visual acuity was significantly improved in GRT group(P<0.05).Complications included unexpected anterior capsule break intraoperatively,anterior capsule opacity,silicone oil emulsification and liquid perfluorocarbin remainig postoperatively.Conclusions:Silicone oil tamponade combined with lensectomy preserving anterior capsule was safe and can reduce the operative complications.The indications included:1.GRT complicated with high myopia;2,advanced PVR cases complicated with high myopia in which silicone oil must be used;3.severe lens opacity cases in which silicone oil must be used;4.complex retinal detachment of only ye.

  10. Treatment Approach to Small Inadvertent Injury of the Crystalline Lens Anterior Capsule During Iridodialysis Repair Surgery

    Directory of Open Access Journals (Sweden)

    Gökçen Gökçe

    2013-01-01

    Full Text Available A 22-year-old man presented to our ophthalmology department with photophobia. On ophthalmic examination, iridodialysis secondary to blunt trauma that occurred 5 years ago was diagnosed. During iridodialysis repair surgery, long curved double-armed needle of 10-0 polypropylene suture (PC-9 inserted into the 19 gauge side port turned down inadvertently by its own weight, resulting in crystalline lens anterior capsule perforation. Postoperative clinical observation revealed no lens opacification affecting visual acuity. This case report showed that lens aspiration surgery should be postponed if the capsule injury is small.(Turk J Ophthalmol 2013; 43: 61-3

  11. Image registration reveals central lens thickness minimally increases during accommodation

    Directory of Open Access Journals (Sweden)

    Schachar RA

    2017-09-01

    Full Text Available Ronald A Schachar,1 Majid Mani,2 Ira H Schachar31Department of Physics, University of Texas at Arlington, Arlington, TX, 2California Retina Associates, El Centro, 3Byers Eye Institute of Stanford University, Palo Alto, CA, USAPurpose: To evaluate anterior chamber depth, central crystalline lens thickness and lens curvature during accommodation.Setting: California Retina Associates, El Centro, CA, USA.Design: Healthy volunteer, prospective, clinical research swept-source optical coherence biometric image registration study of accommodation.Methods: Ten subjects (4 females and 6 males with an average age of 22.5 years (range: 20–26 years participated in the study. A 45° beam splitter attached to a Zeiss IOLMaster 700 (Carl Zeiss Meditec Inc., Jena, Germany biometer enabled simultaneous imaging of the cornea, anterior chamber, entire central crystalline lens and fovea in the dilated right eyes of subjects before, and during focus on a target 11 cm from the cornea. Images with superimposable foveal images, obtained before and during accommodation, that met all of the predetermined alignment criteria were selected for comparison. This registration requirement assured that changes in anterior chamber depth and central lens thickness could be accurately and reliably measured. The lens radii of curvatures were measured with a pixel stick circle.Results: Images from only 3 of 10 subjects met the predetermined criteria for registration. Mean anterior chamber depth decreased, −67 µm (range: −0.40 to −110 µm, and mean central lens thickness increased, 117 µm (range: 100–130 µm. The lens surfaces steepened, anterior greater than posterior, while the lens, itself, did not move or shift its position as appeared from the lack of movement of the lens nucleus, during 7.8 diopters of accommodation, (range: 6.6–9.7 diopters.Conclusion: Image registration, with stable invariant references for image correspondence, reveals that during accommodation a

  12. Measuring phacoemulsification groove depth using probe tip dimensions and biometry lens thickness readings

    Directory of Open Access Journals (Sweden)

    Dunne K

    2016-08-01

    Full Text Available Kevin Dunne, Alex J Buller Department of Ophthalmology, Hawkes Bay District Health Board, Hastings, New Zealand Aim: To describe a useful technique utilizing lens thickness from biometric data as well as phacoemulsification (phaco probe tip dimensions, in order to more accurately determine safe groove depth during divide and conquer techniques for cataract surgery. Methods: Single center, selection of patients for cataract surgery deemed low risk and suitable for surgical teaching cases. Individual lens thickness measurements from biometry were calculated with known phaco tip dimensions to give an individualized safe number of phaco tip depths for grooving during divide and conquer. This technique was then applied during cataract surgery. Results: Utilization of this technique allows calculation and determination of an appropriate number of phaco tip depths of grooving for each individual patient. This technique was applied as a teaching tool for surgical trainees, with subsequent successful safe cataract surgeries completed. No posterior capsule ruptures were noted for these cases. Conclusion: By combining the biometric measurements of an individual patient’s lens thickness together with known phaco tip dimensions, individualized safe groove depths can be theoretically determined and applied during divide and conquer cataract surgery. Keywords: cataract, divide and conquer, groove depth, lens thickness, probe tip

  13. A correlation of thin lens approximation to thick lens design by using context based method in optics education

    Science.gov (United States)

    Farsakoglu, O. F.; Inal Atik, Ipek; Kocabas, Hikmet

    2014-07-01

    The effect of Coddington factors on aberration functions has been analysed using thin lens approximation with optical glass parameters. The dependence of spherical aberration on Coddington shape factor for the various optical glasses in real lens design was discussed using exact ray tracing for the optics education and training purposes. Thin lens approximation and thick lens design are generally taught with only lecturing method. But, thick lens design is closely related to the real life. Hence, it is more appropriate to teach thin lens approximation and thick lens design with real-life context based approach. Context based teaching can be effective in solving problems in which the subject is very difficult and irrelevant. It also provides extensive evidence for optics education that students are generally unable to correctly apply the concepts of lens design to optical instruments currently used. Therefore, the outline of real-life context based thick lens design lessons were proposed and explained in detail considering thin lens approximation.

  14. Diffusion of nanoparticles into the capsule and cortex of a crystalline lens

    Energy Technology Data Exchange (ETDEWEB)

    Schachar, Ronald A [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Chen Wei [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Woo, Boon K [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Pierscionek, Barbara K [School of Biomedical Sciences, University of Ulster, Coleraine BT52 1SA (United Kingdom); Zhang, Xing [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Ma, Lun [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States)

    2008-01-16

    The purpose of this study is to determine the ability of fluorescent nanoparticles to diffuse into a crystalline lens. Intact porcine lenses from five-month-old pigs, intact human lenses obtained from three donors aged 41, 42 and 45 years, and sections of human lens cortex obtained from four donors aged 11, 19, 32, and 34 years were incubated for 72 h at 7 deg. C in aqueous solutions of green (566 nm) and red (652 nm) fluorescent water soluble cadmium tellurium (CdTe) nanoparticles. As demonstrated by fluorescent and confocal microscopy, the CdTe nanoparticles diffused into the porcine and human lens capsule and into human cortical lens fibres; however, the nanoparticles did not pass through the intact lens capsule. Nanoparticles can be used as a method for studying intracellular structure and biochemical pathways within the lens capsule and cortical lens fibres to further understand cataractogenesis and may serve as a carrier for chemotherapeutic agents for the potential treatment of primary and secondary cataracts.

  15. Tethered capsule OCT endomicroscopy for upper gastrointestinal tract imaging by using ball lens probe (Conference Presentation)

    Science.gov (United States)

    Dong, Jing; Gora, Michalina J.; Reddy, Rohith; Trasischker, Wolfgang; Poupart, Oriane; Lu, Weina; Carruth, Robert W.; Grant, Catriona N.; Soomro, Amna R.; Tiernan, Aubrey R.; Rosenberg, Mireille; Nishioka, Norman S.; Tearney, Guillermo J.

    2016-03-01

    While endoscopy is the most commonly used modality for diagnosing upper GI tract disease, this procedure usually requires patient sedation that increases cost and mandates its operation in specialized settings. In addition, endoscopy only visualizes tissue superfically at the macroscopic scale, which is problematic for many diseases that manifest below the surface at a microscopic scale. Our lab has previously developed technology termed tethered capsule OCT endomicroscopy (TCE) to overcome these diagnostic limitations of endoscopy. The TCE device is a swallowable capsule that contains optomechanical components that circumferentially scan the OCT beam inside the body as the pill traverses the organ via peristalsis. While we have successfully imaged ~100 patients with the TCE device, the optics of our current device have many elements and are complex, comprising a glass ferrule, optical fiber, glass spacer, GRIN lens and prism. As we scale up manufacturing of this device for clinical translation, we must decrease the cost and improve the manufacturability of the capsule's optical configuration. In this abstract, we report on the design and development of simplificed TCE optics that replace the GRIN lens-based configuration with an angle-polished ball lens design. The new optics include a single mode optical fiber, a glass spacer and an angle polished ball lens, that are all fusion spliced together. The ball lens capsule has resolutions that are comparable with those of our previous GRIN lens configuration (30µm (lateral) × 7 µm (axial)). Results in human subjects show that OCT-based TCE using the ball lens not only provides rapid, high quality microstructural images of upper GI tract, but also makes it possible to implement this technology inexpensively and on a larger scale.

  16. Measuring phacoemulsification groove depth using probe tip dimensions and biometry lens thickness readings.

    Science.gov (United States)

    Dunne, Kevin; Buller, Alex J

    2016-01-01

    To describe a useful technique utilizing lens thickness from biometric data as well as phacoemulsification (phaco) probe tip dimensions, in order to more accurately determine safe groove depth during divide and conquer techniques for cataract surgery. Single center, selection of patients for cataract surgery deemed low risk and suitable for surgical teaching cases. Individual lens thickness measurements from biometry were calculated with known phaco tip dimensions to give an individualized safe number of phaco tip depths for grooving during divide and conquer. This technique was then applied during cataract surgery. Utilization of this technique allows calculation and determination of an appropriate number of phaco tip depths of grooving for each individual patient. This technique was applied as a teaching tool for surgical trainees, with subsequent successful safe cataract surgeries completed. No posterior capsule ruptures were noted for these cases. By combining the biometric measurements of an individual patient's lens thickness together with known phaco tip dimensions, individualized safe groove depths can be theoretically determined and applied during divide and conquer cataract surgery.

  17. MORPHOLOGICAL ASPECTS OF HUMAN LENS CAPSULES - A COMPARATIVE LM, SEM AND TEM EXAMINATION

    NARCIS (Netherlands)

    JONGEBLOED, WL; KALICHARAN, D; LOS, LI; VANDERVEEN, G; WORST, JGF

    1991-01-01

    Lens capsules of patients of advanced age, obtained after extracapsular cataract surgery, were carefully prepared for a combined LM, TEM and SEM investigation, after preliminary washing and mounting onto a holder in a buffer solution. After pre-fixation with GA, samples were postfixed for LM/TEM and

  18. Altered multiaxial mechanical properties of the porcine anterior lens capsule cultured in high glucose.

    Science.gov (United States)

    Pedrigi, R M; Staff, E; David, G; Glenn, S; Humphrey, J D

    2007-02-01

    Hyperglycemia can alter the mechanical properties of tissues through the formation of advanced glycation endproducts in matrix proteins that have long half-lives. We used a custom experimental system and subdomain finite element method to quantify alterations in the regional multiaxial mechanical properties of porcine lens capsules that were cultured for 8 or 14 weeks in high glucose versus control media. Findings revealed that high glucose significantly stiffened the capsules in both the circumferential and the meridional directions, but it did not affect the known regional variations in anisotropy. Such information could be important in the design of both improved clinical procedures and intraocular implants for diabetic patients.

  19. Optical transmission and laser ablation of pathologically changed eye lens capsule

    Energy Technology Data Exchange (ETDEWEB)

    Gamidov, A A; Bolshunov, A V [Research Institute of Eye Diseases, Russian Academy of Medical Sciences, Moscow (Russian Federation); Yuzhakov, A V; Shcherbakov, E M; Baum, O I; Sobol, E N [Institute on Laser and Information Technologies, Russian Academy of Sciences, Shatura, Moscow Region (Russian Federation)

    2015-02-28

    Optical transmission and ablation mechanisms in the secondary cataract films under the impact of 1.06-mm laser radiation are studied. The comparison of incident and transmitted (paraxial) radiation power at different values of the power density is carried out for two types of the eye lens capsule tissue (hard and soft) possessing different optical and mechanical properties. It is found that the effective attenuation coefficient for soft films is almost five times as large as that for the hard ones. The obtained measurement data on the transparency variation in the process of laser action allow the temperature evaluation and the determination of dominant mechanism of laser ablation, as well as the development of recommendations, providing the prevention or reduction of possible side effects. The obtained results can be used to optimise the regimes of laser impact in the process of the opacified lens capsule removal.

  20. The method for staining of anterior lens capsule in cases with small and rigid pupils

    Directory of Open Access Journals (Sweden)

    V. Kumar

    2014-07-01

    Full Text Available Purpose: to evaluate the safety and effectiveness of proposed method for staining with trypan blue anterior lens capsule in cases with small and rigid pupils.Methods: the safety and effectiveness of the proposed method was evaluated in 169 cases having small and rigid pupils of III and IV grade. Surgical steps included: irrigation of anterior chamber with small amount of air, enough to block the pupil; irrigation of posterior chamber with little amount of dye followed by aspiration of air bubble. the excess dye came out and stained the capsule in pupillary area.Results: No difficulty was encountered in irrigating the posterior chamber with dye. Uneven staining of the capsule was noticed in 16 cases (9.5%. In 3 cases (1.8% extensive staining of iris and posterior capsule was observed. Continuous curvilinear capsulorhexis was performed successfully in 97.6% cases. In 4 cases there was radial run of the rhexis extending up to posterior capsule. Postopera- tive inflammation of 1st and 2nd degree was observed in 5.9 and 23.1% cases, which was related to unavoidable trauma to iris tissue during pupil stretching.Conclusion: the proposed method of capsule staining in cases with small and rigid pupils is safe and effective.

  1. The method for staining of anterior lens capsule in cases with small and rigid pupils

    Directory of Open Access Journals (Sweden)

    V. Kumar

    2012-01-01

    Full Text Available Purpose: to evaluate the safety and effectiveness of proposed method for staining with trypan blue anterior lens capsule in cases with small and rigid pupils.Methods: the safety and effectiveness of the proposed method was evaluated in 169 cases having small and rigid pupils of III and IV grade. Surgical steps included: irrigation of anterior chamber with small amount of air, enough to block the pupil; irrigation of posterior chamber with little amount of dye followed by aspiration of air bubble. the excess dye came out and stained the capsule in pupillary area.Results: No difficulty was encountered in irrigating the posterior chamber with dye. Uneven staining of the capsule was noticed in 16 cases (9.5%. In 3 cases (1.8% extensive staining of iris and posterior capsule was observed. Continuous curvilinear capsulorhexis was performed successfully in 97.6% cases. In 4 cases there was radial run of the rhexis extending up to posterior capsule. Postopera- tive inflammation of 1st and 2nd degree was observed in 5.9 and 23.1% cases, which was related to unavoidable trauma to iris tissue during pupil stretching.Conclusion: the proposed method of capsule staining in cases with small and rigid pupils is safe and effective.

  2. Repeatability of OCT lens thickness measures with age and accommodation.

    Science.gov (United States)

    Doyle, Lesley; Little, Julie-Anne; Saunders, Kathryn J

    2013-12-01

    To investigate crystalline lens thickness (LT) across a range of ages and accommodative demands and to evaluate the repeatability of LT measurements using the Visante Anterior Segment Optical Coherence Tomographer (AS-OCT) (Zeiss Meditec, Germany) under non-cycloplegic conditions. Participants were 98 visually normal adults aged 18-75 years, stratified into age groups of 18-29, 30-39, 40-49, 50-59, and 60-75 years of age. Images of the crystalline lens were taken using the Visante AS-OCT during stimulation of accommodation at demands of 0, 1, 2, 3, 4, 5, and 8 D with accommodative response measured in a subgroup of participants. Images were analyzed and LT measured assuming a refractive index of 1.42. Repeat measures were taken from 86 participants for each accommodative demand at a second visit. The mean unaccommodated LT for all participants was 4.07 ± 0.40 mm. An average increase in LT of 20 μm per year was calculated (linear regression, R² = 0.61, F(1,89) = 143.92, p report the repeatability of LT measures using the Visante AS-OCT in the non-cyclopleged eye. It has also demonstrated the ability of the Visante AS-OCT to detect small changes in lens thickness with accommodation.

  3. In-the-bag decentration of a hydrophilic radially asymmetric multifocal intraocular lens secondary to capsule contraction.

    NARCIS (Netherlands)

    Linden, J.W.M. van der; Meulen, I.J. van der; Mourits, M.P.; Lapid-Gortzak, R.

    2013-01-01

    We report a case of in-the-bag decentration and tilt of a hydrophilic rotationally asymmetric multifocal intraocular lens (IOL) of the M Plus type secondary to capsule contraction. After uneventful surgery and follow-up for 3 months, progressive decentering and tilting of the IOL secondary to capsul

  4. Experimental study on cyclosporine A drug delivery system in prevention of posterior capsule opacification after intraocular lens implantation in rabbits

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Objective To study the effect of cyclosporine A drug delivery system (CsA-DDS) on the prevention of posterior capsule opacification (PCO) after experimental intraocular lens implantation in rabbit eyes. Methods Twenty healthy New Zealand white rabbits, whose left eyes and right eyes were used respectively as experiment eyes and controls, were subjected to extracapsular lens extraction and artificial lens implantation. During the operation, CsA-DDS with poly (lactideco-glycolide) as carriers or empty DDS was...

  5. Bilateral spontaneous rupture of anterior lens capsules in a middle-aged woman

    Directory of Open Access Journals (Sweden)

    Hemalatha C

    2012-11-01

    Full Text Available Chandrakanthan Hemalatha,1,2 Hamzah Norhafizah,1 Ismail Shatriah21Department of Ophthalmology, Hospital Tengku Ampuan Rahimah, Selangor, Malaysia; 2Department of Ophthalmology, School of Medical Sciences, Universiti Sains Malaysia, Kubang Kerian, Kelantan, MalaysiaAbstract: Hypermature cataracts are commonly seen in developing countries. Spontaneous rupture of the anterior capsule, resulting in dislocation of the lens nucleus into the anterior chamber, presents rarely in hypermature cataracts. We describe a middle-aged woman who presented with spontaneous anterior dislocation of the nucleus in both eyes. The presence of calcification spots in the posterior capsule at the pupillary edge strongly suggested that our patient had hypermature cataracts. It is important to highlight this uncommon cause of nucleus dislocation in a patient with no previous history of ocular trauma.Keywords: dislocation of the nucleus, anterior chamber, hypermature cataract

  6. SURGICAL INTERVENTION AND ACCOMMODATIVE RESPONSES: I. CENTRIPETAL CILIARY BODY, CAPSULE AND LENS MOVEMENT IN RHESUS MONKEYS OF VARYING AGE

    Science.gov (United States)

    Croft, Mary Ann; Mcdonald, Jared P.; James, Rebecca J.; Heatley, Gregg A.; Lin, Ting-Li; Lütjen-Drecoll, Elke; Kaufman, Paul L.

    2009-01-01

    Purpose To determine how surgically altering the normal relationship between the lens and the ciliary body in rhesus monkeys affects centripetal ciliary body and lens movement. Methods In 18 rhesus monkey eyes (aged 6–27 years), accommodation was induced before and after surgery by electrical stimulation of the Edinger-Westphal (E–W) nucleus. Accommodative amplitude was measured by coincidence refractometry. Goniovideography was performed before and after intra- and extra-capsular lens extraction (ICLE, ECLE) and anterior regional zonulolysis. Centripetal lens/capsule movements, centripetal ciliary process (CP) movements, and circumlental space were measured by computerized image analysis of the goniovideography images. Results Centripetal accommodative CP and capsule movement increased in velocity and amplitude post-ECLE compared to pre-ECLE regardless of age (n=5). The presence of the lens substance retarded capsule movement by ~21% in the young eyes and by ~62% in the older eyes. Post-ICLE compared to pre-ICLE centripetal accommodative CP movement was dampened in all eyes in which the anterior vitreous was disturbed (n=7), but not in eyes in which the anterior vitreous was left intact (n=2). Following anterior regional zonulolysis (n=4), lens position shifted toward the lysed quadrant during accommodation. Conclusions The presence of the lens substance, capsule zonular attachments, and Wiegers ligament may play a role in centripetal CP movement. The capsule is still capable of centripetal movement in the older eye (although at a reduced capacity) and may have the ability to produce ~6 diopters of accommodation in the presence of a normal young crystalline lens or a similar surrogate. PMID:18552393

  7. Ultrasonic Evaluation of the Lens Thickness to Axial Length Factor in Primary Closure Angle Glaucoma

    Institute of Scientific and Technical Information of China (English)

    1993-01-01

    Ultrasonic biometry was done in 232 normal eyes and 138 eyes with primary angle closure glaucoma (ACG), using Ultrascan Digital B System IV (10 MHz). The ratio between the lens thickness and the axial length (lens thickness to axial length factor, LAF) was evaluated as a biometric index for assessing the eye with primary ACG in Chinese. LAF of 2.00 was found to be ideal point of demarcation between ACG and normal eyes (i.e., lens thickness equals to 1/5 of axial length). It appears that LAF is helpful i...

  8. Protective effect of the anterior lens capsule during extracapsular cataract extraction. Part I. Experimental animal study.

    Science.gov (United States)

    Solomon, K D; Gwin, T D; O'Morchoe, D J; Tetz, M R; Hansen, S O; Sugita, A; Imkamp, E M; Apple, D J

    1989-05-01

    In an experimental study using albino Rex rabbits, the intercapsular cataract extraction (ICCE) technique was performed in 20 eyes with a small anterior capsulotomy. A large, can opener capsulotomy was performed in another 20 eyes, and 10 unoperated eyes served as controls. Endothelial cell loss was determined by vital staining with Trypan blue and Alizarin red S stains. Average endothelial cell loss with the ICCE technique was 1.2%; with the can opener technique, the average cell loss was 6.6%. This difference was statistically significant (P less than 0.01). The percentage of endothelial cell loss in the control eyes was 0.5. A positive correlation between endothelial cell loss related to phacoemulsification time and/or the amount of irrigating fluid used existed for the can opener group only (P less than 0.01). These results demonstrate that the presence of an almost intact anterior lens capsule during removal of lens substance is protective to the corneal endothelium.

  9. [Lens platform].

    Science.gov (United States)

    Łukaszewska-Smyk, Agnieszka; Kałuzny, Józef

    2010-01-01

    The lens platform defines lens structure and lens material. Evolution of lens comprises change in their shape, angulation of haptens and transition of three-piece lens into one-piece lens. The lens fall into two categories: rigid (PMMA) and soft (siliconic, acrylic, colameric). The main lens maaterials are polymers (hydrophilic and hydrophobic). The lens platform has an effect on biocompatibility, bioadhesion, stability of lens in capsule, degree of PCO evolution and sensitiveness to laser damages.

  10. Experimental study on cyclosporine A drug delivery system in prevention of posterior capsule opacification after intraocular lens implantation in rabbits

    Institute of Scientific and Technical Information of China (English)

    Pei Cheng; Sun Naixue

    2008-01-01

    Objective To study the effect of cyclosporine A drug delivery system (CsA-DDS) on the prevention of posterior capsule opacification (PCO) after experimental intraocular lens implantation in rabbit eyes. Methods Twenty healthy New Zealand white rabbits, whose left eyes and right eyes were used respectively as experiment eyes and controls, were subjected to extracapsular lens extraction and artificial lens implantation. During the operation, CsA-DDS with poly (lactideco-glycolide) as carriers or empty DDS was implanted in the capsular bag for the experimental eyes and controls respectively. After the operation, anterior chamber reaction, intraocular pressure (IOP) and CsA concentration were monitored and twelve weeks after the operation, the eyes were extracted for histopathological and morphological examinations. Results There were no differences between the two groups in conjunctival congestion,IOP change and anterior chamber reaction. PCO was less severe in the experimental eyes than in the controls. Light microscopy revealed that posterior capsular membrane in the experimental eyes was slick, with no obvious proliferation,whereas in the controls, there were lens epithelial cell proliferation and cortex regeneration of different degrees.Morphological examination with electron microscope showed that in the experimental eyes, lens epithelial cells did not function actively and apoptosis occurred, whereas in the controls, epithelial cells presented active function. No marked ultrastructural changes were found in either group. Conclusion Cs-DDS can inhibit PCO after intraocular lens implantation in rabbit eyes and does not have toxic effects on the surrounding ocular tissues. Therefore, it has a good potential for clinical use in prevention of PCO.

  11. New method for lens thickness measurement by the frequency-shifted confocal feedback

    Science.gov (United States)

    Tan, Yidong; Zhu, Kaiyi; Zhang, Shulian

    2016-12-01

    We describe a new method for lens thickness and air gap measurement based on the frequency-shifted confocal feedback. The light intensity fluctuation is eliminated by the heterodyne modulation and the detection sensitivity is improved prominently by the frequency-shifted feedback effect. The measurement results for different materials and kinds of lenses are presented in the paper, including K9 plain glasses, fused silica plain glass, and K9 biconvex lens. The uncertainty of the axial positioning is better than 0.0005 mm and the accuracy reaches micron range. It is promising to be applied in the multi-layer interface positioning and measurement area.

  12. Clinical Observation on Preservation of Lens Anterior Capsule in Reduction of Complications Associated with Silicone Oil

    Institute of Scientific and Technical Information of China (English)

    Zongming Song; Yannian Hui; Lin Wang; Xiaoyan Cao; Qianying Gao

    2001-01-01

    Purpose: To observe the effect of preservation of anterior capsule on the incidence of complications associated with silicone oil. Methods: 82 patients(82 eyes) accepted trans pars plana vitrectomy(TPPV) combined with lensectomy of whom , 30 eyes with preservation of anterior capsule(PAC) and 52eyes with no preservation of anterior capsule (NPAC). Analysis of the incidence of complications associated with use of oil. Results:The incidence rate was 50.0 % in NPAC group, and 23.3 % in PAC group( P < 0. 025 ). There were seconda'y glaucoma (21. 1% ), band keratopathy ( 13.5 % ) and corneal decompensation(9.6 % ) in NPAC group, while there was none of them in PAC group. Conclusions: Preservation of anterior capsule is an eftective method to reduce the complications associated with silicone oil. Eye Science 2001; 17:39 ~ 41.

  13. Analysis of water film thickness on contact lens by reflectometry technique

    Science.gov (United States)

    Wang, Michael R.; Lu, Hui; Wang, Jianhua; Shen, Meixiao

    2011-03-01

    We report the use of optical reflectometry technique for evaluation of water film on contact lens. The water film can be measured through the spectral dependent reflectance evaluation, which is carried out by illuminating the contact lens with a white light and collecting the returning light with an optical fiber coupled to a spectrometer. Water film thinning process has been observed on different soft contact lenses and minimum measurable thickness is about 0.85 μm. The measurement is fast and accurate. The water film measurement can be valuable for contact lens design to improve its hydrophilic properties. The technique can be extended for the study of tear film dynamics in an eye.

  14. Finite thickness lens model for self-focusing (defocusing) in Kerr medium

    Institute of Scientific and Technical Information of China (English)

    Shi-fang GUO; Qiang TIAN

    2009-01-01

    A "finite thickness lens" model for self-focusing (defocusing) in Kerr medium is presented. An onaxis normalization transmittance formula is presented for arbitrary nonlinear phase shift for the finite thickness Kerr medium by introducing a nonlinear ABCD-matrix for the transition of a Gaussian beam from linear to nonlinear medium, without complex calculation for the beam radius at the far field aperture. The variation of the peak and valley transmittance difference is found to enhance linearly as the phase shift at the focus increases by increasing the thickness of the medium. If the ratio of the Rayleigh distance divided by the thickness of the medium (d/zo) is constant and small enough, the peak and valley transmittance difference stays constant. Finally, a qualitative formula is presented to express the relationship between the system parameters and the on-axis phase shift at the focus.

  15. Capsule Contraction Syndrome with a Microincision Foldable Hydrophilic Acrylic Intraocular Lens: Two Case Reports and Review of the Literature

    Directory of Open Access Journals (Sweden)

    Angelo Balestrazzi

    2014-10-01

    Full Text Available Here we present 2 cases of capsule contraction syndrome (CCS. In both cases, a hydrophilic acrylic Akreos MI60 (Bausch and Lomb intraocular lens (IOL was implanted in the capsular bag through microincision cataract surgery, and the literature on the subject is reviewed. Since CCS has been described after the implantation of every IOL type, it is unlikely that the Akreos MI60 chemical and physical properties may cause CCS. When CCS occurs with IOLs composed of increasingly flexible materials that are inserted through incisions of decreasing size, a severe dislocation and deformation of IOL optics and haptics may develop. In both cases illustrated here, Nd:YAG laser anterior capsulotomy was highly effective. Hence, also based on the literature, which reports severe complications as a result of surgical intervention, it is suggested that Nd:YAG laser anterior capsulotomy be the first line of CCS treatment when the luxation of an IOL capsular bag is absent.

  16. Capsule contraction syndrome with a microincision foldable hydrophilic acrylic intraocular lens: two case reports and review of the literature.

    Science.gov (United States)

    Balestrazzi, Angelo; Malandrini, Alex; Martone, Gianluca; Marigliani, Davide; Caporossi, Tomaso; Tosi, Gian Marco

    2014-09-01

    Here we present 2 cases of capsule contraction syndrome (CCS). In both cases, a hydrophilic acrylic Akreos MI60 (Bausch and Lomb) intraocular lens (IOL) was implanted in the capsular bag through microincision cataract surgery, and the literature on the subject is reviewed. Since CCS has been described after the implantation of every IOL type, it is unlikely that the Akreos MI60 chemical and physical properties may cause CCS. When CCS occurs with IOLs composed of increasingly flexible materials that are inserted through incisions of decreasing size, a severe dislocation and deformation of IOL optics and haptics may develop. In both cases illustrated here, Nd:YAG laser anterior capsulotomy was highly effective. Hence, also based on the literature, which reports severe complications as a result of surgical intervention, it is suggested that Nd:YAG laser anterior capsulotomy be the first line of CCS treatment when the luxation of an IOL capsular bag is absent.

  17. Primary Posterior Chamber Intraocular Lens Implantation in Traumatic Cataract With Posterior Capsule Breaks

    Institute of Scientific and Technical Information of China (English)

    YupingZou; WenhuiYang

    1995-01-01

    Background:In patients with incomplete posterior capsule support,posterior chamber intraocular lenses(PC-IOLs)were implanted with both haptics transs-cleral fixation.This causes more damage to the eye and may result in more com-plications,In patients with small posterior breaks,non-fixation or single haptic fixation may be adequate.Methods:Thiry-two consecutive patients of traumatic cataract with posterior capsule breaks caused by penetrating eye trauma were retospected.Posterior chamber intraocular lenses were implanted in all these patients with three tech-niques,ie,without fixation,with single haptic fixation and with both haptics fixation .The selection of the technique was based on the position and size of the posterior capsule.The follow-up period was 21days to 28months(mean,15.2months).Results:Intra-operative problems included ciliary body bleeding(Two patents,6.25%)and enlargement of posterior capsule breaks(2patients,6.25).Postoperative visual acuity was0.5or better(Corrected)in28case(87.5%)and 0.1-0.4in four patients(12.5%),Postoperative complications included hyphema(6eyes,18.8%),transient intraocular pressure elevation(6eyes,18.8%),transient hypotention(7eyes,21.8%).Postoperative IOL position were good except one case of IOL tilt.No pupillary capture or endophthalmitis was found.Conclusions:Not all PC-IOLs have to be fixed by two haptics.In patients with small posterior capsule breaks,PC-IOLmay not be fixed or fixed by only one haptics.Eye Science1995;11:140-142.

  18. Estimating the freshwater-lens thickness of atoll islands in the Federated States of Micronesia

    Science.gov (United States)

    Bailey, R. T.; Jenson, J. W.; Taboroši, D.

    2013-03-01

    The water resources of the 32 atolls of the Federated States of Micronesia (FSM) are under continual threat from El Niño-induced droughts and other natural hazards. With government policies emphasizing sustainable development of atoll-island communities, local managers are in need of tools for predicting changes in the availability of fresh groundwater, which communities depend upon during droughts that incapacitate rain-catchment systems. An application of a recently developed, readily portable algebraic model is demonstrated here, to estimate the freshwater-lens thickness of atoll islands in the FSM, a key component of FSM groundwater resource assessment. Specifically, the model provides estimates of the lens thickness of atoll islands in the FSM during normal and drought conditions. The model was tested for use in the FSM through comparison with available lens data under both average rainfall conditions and intense drought conditions, and then applied to major islands of each atoll within the FSM. Results indicate that out of 105 major islands on FSM atolls, only six would likely retain sufficient groundwater to sustain the local community during an intense drought.

  19. The impact of capsule ``tent'' thickness on interpreting low mode shape

    Science.gov (United States)

    Nagel, S. R.; Rygg, J. R.; Benedetti, L. R.; Ma, T.; Barrios, M. A.; Haan, S. W.; Hammel, B. A.; Doeppner, T.; Pak, A. E.; Tommasini, R.; Jones, O. S.; Town, R. P. J.; Bradley, D. K.

    2013-10-01

    The performance of ICF targets relies on the symmetric implosion of highly compressed fuel. X-ray area-backlit imaging is used to assess in-flight low mode 2D asymmetries of the shell. These time-resolved images of the shell exhibit features that can be related to the lift-off position of the membranes used to hold the capsule within the hohlraum. Here we describe a systematic study of this membrane or ``tent'' thickness and its impact on the measured low modes seen in in-flight and self-emission images. While the low mode amplitudes (particularly P2 and P4) are weakly affected by the tent in time-resolved, backlit data, we observe areal density variations consistent with the membrane. By contrast, time integrated self-emission images along the same axis exhibit a reversal in perceived P4 mode due to the growth of the tent seeded feature, which could explain prior inconsistencies between the in-flight P4 and core P4, leading to a reevaluation of optimum hohlraum length. Prepared by LLNL under Contract DE-AC52-07NA27344. LLNL-ABS-640729.

  20. Study of Scintillator thickness optimization of lens-coupled X-ray imaging detectors

    Science.gov (United States)

    Xie, H.; Du, G.; Deng, B.; Chen, R.; Xiao, T.

    2016-03-01

    Lens-coupled X-ray in-direct imaging detectors are very popular for high-resolution X-ray imaging at the third generation synchrotron radiation facilities. This imaging system consists of a scintilator producing a visible-light image of X-ray beam, a microscope objective, a mirror reflecting at 90° and a CCD camera. When the thickness of the scintillator is matched with the numerical aperture (NA) of the microscope objective, the image quality of experimental results will be improved obviously. This paper used an imaging system at BL13W beamline of Shanghai Synchrotron Radiation Facility (SSRF) to study the matching relation between the scintillator thickness and the NA of the microscope objective with a real sample. By use of the matching relation between the scintillator thickness and the NA of the microscope objective, the optimal imaging results have been obtained.

  1. Longitudinal Changes in Lens Thickness in Myopic Children Enrolled in the Correction of Myopia Evaluation Trial (COMET).

    Science.gov (United States)

    Gwiazda, Jane; Norton, Thomas T; Hou, Wei; Hyman, Leslie; Manny, Ruth

    2016-04-01

    To describe longitudinal changes in lens thickness in myopic children in the Correction of Myopia Evaluation Trial (COMET) and to investigate the association between these changes and myopia progression. Four-hundred sixty-nine 6 to Sonomed A2500) were measured annually over 11 years. Analyses of lens thickness were based on right eye data from 426 children with refractions fit with Gompertz functions. Longitudinal lens thickness measurements for each participant were fit with a third-degree polynomial function, and average polynomial functions were calculated for three groups of children previously identified based on Gompertz functions: 6-7 years at baseline (n = 40), ≥8 years with progressing myopia (n = 329), and ≥8 years with non-progressing myopia (n = 56). ANOVAs were used for comparing the lens curve-based parameters among the three groups. Associations between lens and Gompertz parameters were assessed using Pearson correlations. Overall, between 6 and 18 years the lenses thinned and then thickened, with the minimum value of 3.37 ± 0.15mm reached at 11.56 ± 2.04 years. The minimum lens thickness did not differ among the three myopia groups (p = 0.09), nor was it correlated with the amount of myopia at lens minimum or amount of final myopia (r's = -0.01 and -0.03, respectively, p's > 0.05). As a similar pattern of change in lens thickness with age was found in all children, whether their myopia progressed or not, these results suggest that the association of lens thinning and thickening with the course of myopia is coincidental rather than causal.

  2. Development of an accommodating intra-ocular lens - In vitro prevention of re-growth of pig and rabbit lens capsule epithelial cells

    NARCIS (Netherlands)

    van Kooten, Theo G.; Koopmans, Steven; Terwee, Thom; Norrby, Sverker; Hooymans, J. M. M.; Busscher, Henk J.

    2006-01-01

    Cataract surgery is routinely performed to replace the clouded lens by a rigid polymeric intra-ocular lens unable to accommodate. By implanting a silicone gel into an intact capsular bag the accommodating properties of the natural lens can be maintained or enhanced. The implantation success of accom

  3. Effect of femtosecond laser-assisted lens surgery on posterior capsule opacification in the human capsular bag in vitro.

    Science.gov (United States)

    Wertheimer, Christian; Kreutzer, Thomas C; Dirisamer, Martin; Eibl-Lindner, Kirsten; Kook, Daniel; Priglinger, Siegfried; Mayer, Wolfgang J

    2017-03-01

    To compare posterior capsule opacification (PCO) by observing lens epithelial cell growth in the human capsular bag in vitro between conventional lens surgery using phacoemulsification (Phaco) technique and femtosecond laser-assisted lens surgery (FLACS). For the in vitro human capsular bag model, 18 cadaver eyes from nine human donors underwent three types of lens surgery. Three groups consisting of six capsular bags were established, that is FLACS, Phaco and extracapsular lens extraction (ECCE). The capsular bag was transferred into equal cell culture conditions after using one of the defined surgical approaches. Cellular growth of lens epithelial cells was observed and photo-documented. The time until full cell-coverage of the capsular bag was measured. The human capsular bag model can be successfully prepared using FLACS. There was no statistically significant difference in time until cell-coverage of the human donor capsular bag in vitro in all three surgical settings (ECCE versus Phaco p = 0.6; ECCE versus FLACS p = 1.0; Phaco versus FLACS p = 1.0). In our in vitro human capsular bag model, we could not observe a statistically significant difference in PCO formation using different surgical approaches of lens extraction. Therefore, PCO formation might not be attributed to the type of surgery. Furthermore, this study shows that FLACS can be used for the human capsular bag model preparation and validates the human capsular bag model for future research. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  4. The Repeatability Assessment of Three-Dimensional Capsule-Intraocular Lens Complex Measurements by Means of High-Speed Swept-Source Optical Coherence Tomography

    Science.gov (United States)

    Chang, Pingjun; Li, Jin; Savini, Giacomo; Huang, Jinhai; Huang, Shenghai; Zhao, Yinying; Liao, Na; Lin, Lei; Yu, Xiaoyu; Zhao, Yun-e

    2015-01-01

    Purpose To rebuild the three-dimensional (3-D) model of the anterior segment by high-speed swept-source optical coherence tomography (SSOCT) and evaluate the repeatability of measurement for the parameters of capsule-intraocular lens (C-IOL) complex. Methods Twenty-two pseudophakic eyes from 22 patients were enrolled. Three continuous SSOCT measurements were performed in all eyes and the tomograms obtained were used for 3-D reconstruction. The output data were used to evaluate the measurement repeatability. The parameters included postoperative aqueous depth (PAD), the area and diameter of the anterior capsule opening (Area and D), IOL tilt (IOL-T), horizontal, vertical, and space decentration of the IOL, anterior capsule opening, and IOL-anterior capsule opening. Results PAD, IOL-T, Area, D, and all decentration measurements showed high repeatability. Repeated measure analysis showed there was no statistically significant difference among the three continuous measurements (all P > .05). Pearson correlation analysis showed high correlation between each pair of them (all r >0.90, P<0.001). ICCs were all more than 0.9 for all parameters. The 95% LoAs of all parameters were narrow for comparison of three measurements, which showed high repeatability for three measurements. Conclusion SSOCT is available to be a new method for the 3-D measurement of C-IOL complex after cataract surgery. This method presented high repeatability in measuring the parameters of the C-IOL complex. PMID:26600254

  5. The morphlogic change of the lens capsule in patients with congenital cataract%先天性白内障的晶体囊膜异常

    Institute of Scientific and Technical Information of China (English)

    庞琳; 甘晓玲

    2001-01-01

    Object To investigate researched the morphologic change of thelens capsule and the relationship with congenital cataract. Method We reviewed records of 41 eyes of 26 patients with congenital cataract. They were undergone the cataract extraction between April. 1998 and October. 1999. The mean age of them was 2.5 years. (2 months~12years), 16 male and 10 female. The morphologic characteristics of the lens were observed with slit-lamp or operating microscope. Result 39.0% of all cases have the pathological changes of the lens capsule. In the most of them, cataract often happens in the 6 months of age and majority of the eyes were combined with multifarious congenital abnormalities, such as microphthalmus、 glaucoma、 PHPV、 microcrystal and so on. The shorter the ocular axial lengths is, the more odds of lens capsule abnormalities is. Conclusion The dysgenesis of lens capsule is intimately correlated with congenital cataract.%目的 探讨晶体囊膜的形态学特点及与先天性白内障的关系。方法 对患有先天性白内障的26人41眼进行临床形态学观察。结果 有晶体囊膜异常的病例占总数的39.0%,大部分在半岁内发病,多数合并有小眼球、青光眼、虹膜异常、晶体后纤维增生症、永存增生性原始玻璃体(PHPV)、小晶体等先天异常。眼轴越短的眼有囊膜病变的几率越高。结论 本结果提示晶体囊膜的形成与白内障的发生及眼球的发育密切相关。

  6. [Effects of Kuntai Capsules on endometrial thickness and expressions of leukemia inhibitory factor and epidermal growth factor in mouse after controlled ovarian hyperstimulation].

    Science.gov (United States)

    Chu, Xiying; Song, Yuxia; Wan, Lijing; Tan, Li

    2014-08-05

    To explore the effects of Kuntai Capsules on endometrial thickness and the expressions of leukemia inhibitory factor (LIF) and epidermal growth factor (EGF) in mouse after controlled ovarian hyperstimulation. Healthy Sprague-Dawley mice were randomly allocated into 4 groups of control (group A), controlled ovarian hyperstimulation [COH (group B)], COH plus low-dose Kuntai Capsules (group C) and COH plus large-dose Kuntai Capsules [2x low-dose (group D)]. The controlled ovarian hyperstimulation model was established. The endometrial thickness was measured by computerized multi-functional image analyzer. And the expressions of LIF and EGF in proliferating endometrium were examined by immunohistochemistry. The endometrial thickness of groups C and D were higher than that of groups A and B. And there were significant differences (P Capsules can promote the growth of endometrium and enhance the expression levels of EGF and LIF in mice. And it may improve the ability of endometrial receptivity through optimized microenvironment. And a larger dose of Kuntai Capsules yields better outcomes.

  7. A thick lens of fresh groundwater in the southern Lihue Basin, Kauai, Hawaii, USA

    Science.gov (United States)

    Izuka, Scot; Gingerich, Stephen

    2002-11-01

    A thick lens of fresh groundwater exists in a large region of low permeability in the southern Lihue Basin, Kauai, Hawaii, USA. The conventional conceptual model for groundwater occurrence in Hawaii and other shield-volcano islands does not account for such a thick freshwater lens. In the conventional conceptual model, the lava-flow accumulations of which most shield volcanoes are built form large regions of relatively high permeability and thin freshwater lenses. In the southern Lihue Basin, basin-filling lavas and sediments form a large region of low regional hydraulic conductivity, which, in the moist climate of the basin, is saturated nearly to the land surface and water tables are hundreds of meters above sea level within a few kilometers from the coast. Such high water levels in shield-volcano islands were previously thought to exist only under perched or dike-impounded conditions, but in the southern Lihue Basin, high water levels exist in an apparently dike-free, fully saturated aquifer. A new conceptual model of groundwater occurrence in shield-volcano islands is needed to explain conditions in the southern Lihue Basin. Résumé. Dans le sud du bassin de Lihue (Kauai, Hawaii, USA), il existe une épaisse lentille d'eau souterraine douce dans une vaste région à faible perméabilité. Le modèle conceptuel conventionnel pour la présence d'eau souterraine à Hawaii et dans les autres îles de volcans en bouclier ne rend pas compte d'une lentille d'eau douce si épaisse. Dans ce modèle conceptuel, les accumulations de lave dont sont formés la plupart des volcans en bouclier couvrent de vastes régions à relativement forte perméabilité, avec des lentilles d'eau douce peu épaisses. Dans le sud du bassin de Lihue, les laves remplissant le bassin et les sédiments constituent une région étendue à faible conductivité hydraulique régionale, qui, sous le climat humide du bassin, est saturée presque jusqu'à sa surface; les surfaces pi

  8. Comparison of posterior capsule opacification at 360-degree square edge hydrophilic and sharp edge hydrophobic acrylic intraocular lens in diabetic patients

    Institute of Scientific and Technical Information of China (English)

    Ling; Bai; Jin; Zhang; Ling; Chen; Ting; Ma; Hou-Cheng; Liang

    2015-01-01

    ·AIM: To compare posterior capsule opacification(PCO)degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens(IOL)(570C C-flex, Rayner) and sharp edge hydrophobic acrylic IOL(Sensar AR40 e,AMO) in diabetic patients.· METHODS: Sixty diabetic patients underwent uneventful phacoemulsification and randomly implanted one of the two IOLs. The PCO value was measured by retroillumination photographs and Evaluation of Posterior Capsule Opacification(EPCO) 2000 image-analysis software at 1, 6, 12, and 24 mo after surgery. Visual acuity, and contrast sensitivity in photopic and mesopic conditions were also examined at each follow up time point. The incidence of eye that required Nd:YAG laser posterior capsulotomy were also compared.·RESULTS: There was not any statistically significant difference in PCO scores between Rayner C-flex 570 C group and Sensar AR40 e group at each follow up time point. Visual acuity, Nd:YAG capsulotomy incidence and contrast sensitivity also had no significant difference during the 24 mo follow-up.·CONCLUSION: For diabetic patients, Rayner 570 C Cflex and Sensar AR40 e IOLs are same effective for prevent PCO. The 360-degree square edge design maybe is a good alternative technique to improve PCO prevention.

  9. Practice patterns of cataract surgeons at academic medical centers for the management of inadequate capsule support for intracapsular or sulcus intraocular lens placement during cataract surgery.

    Science.gov (United States)

    Sorenson, Rebecca; Scott, Ingrid U; Tucker, Steven H; Chinchilli, Vernon M; Papachristou, George C

    2016-02-01

    To determine practice patterns with regard to intraocular lens (IOL) placement during cataract surgery when there is inadequate capsule support for intracapsular or sulcus IOL placement. Pennsylvania State College of Medicine, Hershey, Pennsylvania, USA. Cross-sectional study of anonymous survey results. An online survey was e-mailed to the coordinators of all Accreditation Council for Graduate Medical Education-accredited ophthalmology residency programs with a request to forward to all faculty who perform cataract surgery. Sixty-seven (57.2%) of 117 confirmed survey recipients participated. Thirty-six (62.1%) said they felt comfortable placing scleral-fixated posterior chamber IOLs (PC IOLs) independently. Faced with inadequate capsule support, 58.6% would place a primary anterior chamber IOL (AC IOL), 29.3% would place a primary scleral-fixated PC IOL, and 5.3% would leave the patient aphakic for secondary scleral-fixated PC IOL placement. Surgeons not comfortable placing scleral-fixated PC IOLs were most likely to choose primary AC IOLs (77.3%). Surgeons comfortable placing scleral-fixated PC IOLs were more evenly divided between primary AC IOLs (47.2%) and scleral-fixated PC IOLs (41.7%). Among surgeons who favored primary scleral-fixated PC IOLs, 63.7% cited a decreased risk for long-term complications as their reason for IOL choice; 50.0% of surgeons who favored primary AC IOLs cited avoidance of a second surgery. In general, primary AC IOL placement was preferred in the setting of inadequate capsule support, although less so among surgeons who were comfortable placing scleral-fixated PC IOLs. Lack of comfort with scleral-fixated PC IOL placement suggests a potential unmet training need in residency and fellowship programs. No author has a financial or proprietary interest in any material or method mentioned. Copyright © 2016 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  10. A longitudinal study assessing lens thickness changes in the eye of the growing beagle using ultrasound scanning: relevance to age of dogs in regulatory toxicology studies.

    Science.gov (United States)

    Maynard, Juliana; Sykes, Angela; Powell, Helen; Healing, Guy; Scott, Marietta; Holmes, Andrew; Ricketts, Sally-Ann; Stewart, Jane; Davis, Stewart

    2014-12-01

    The lens is formed in utero with new secondary lens fibres added as outer layers throughout life in a growth pattern characteristic of the species. This study examined the time course of beagle lens growth to better understand the optimal starting age of dogs for safety studies to support adult versus paediatric indications, and to assess the feasibility of non-invasively monitoring lens growth with high frequency ultrasound. Ultrasound scanning was performed in six female beagle dogs using the Vevo770. All dogs were imaged in B-mode using local anaesthetic but without sedation. Imaging was carried out every 2 weeks from 8 to 22 weeks of age and then monthly until 62 weeks of age. The dogs tolerated the procedure well. The lens was visible in all dogs and measuring the lens thickness with high frequency ultrasound demonstrated good analytical reproducibility [Root Mean Square (RMS) = 3.13%]. No differences between the left and right eye existed and lens thickness correlated with body weight. The highest weekly growth rate was before 12 weeks of age. A statistically significant difference between monthly thickness was detected until 42 weeks of age at which point growth reached a plateau. During the experiment, lenses grew by 29.7% reaching an average thickness of 6.4 mm ± 0.03. By 10 months of age (the typical age used for routine toxicological evaluation), beagles have reached a plateau in lens growth that is analogous to human adults. Where lens is a target organ of concern it is suggested that beagles under 6 months old may be a better model for determining paediatric safety.

  11. Influence of Intraocular Lens Material and Eye Axial Length on Posterior Capsule Opacification Dynamic Rate and Frequency

    Directory of Open Access Journals (Sweden)

    G. V. Sorokoletov

    2016-01-01

    Full Text Available Purpose: To evaluate posterior capsule opacification (PCO formation dynamic rate and frequency in artificial eyes with myopia in different terms after cataract extraction and it’s relation with IOL material. Patients and methods. An evaluation of PCO formationdynamic rate and frequency was done by using a retrospective analysis of YAG-laser assist posterior capsule dissections in different terms after cataract extraction on 45640 eyes of 43520 patients with emmetropia and myopia without concomitant pathology.The mean patient’s age was 73±7 years and the least follow-up after  hacoemulsification was 5 years. All eyes were divided on two groups. The first group included 25339 eyes where a hydrophilic IOL was implanted; the second group included 20301 eyes where a hydrophobic IOL was implanted. Results. At the first group the YAG-laser assist posterior capsule dissection was done on 2128 (8,4% eyes. It was shown a proportional influence of axial length on PCO frequency but more rapidly the PCO rate increased between 26 to 28 mm and then this parameter had stabilization. The PCO dynamic rate had a normal statistical corresponding in the group with maximum at third postoperative year. At the second group YAG-laser assist posterior capsule dissection was done on 244 (1,2% eyes. It was shown a proportional influence of axial length on PCO frequency too. But increasing of axial length more than 28 mmincreased PCO rate correspondingly that differ the second group from the first. The PCO dynamic rate had an inversely proportional character in the group. Comparing the PCO frequency in both groups showed that hydrophobic material has less PCO rate with any axial length and every time of follow-up. Conclusion. An IOL’s material plays an important role in PCO formation and PCO formation dynamic rate. Hydrophobic material has a statistically significant less PCO frequency through five-year follow-up in eyes with myopia and emmetropia. The PCO dynamic

  12. Synthesis of the Thickness Profile of the Waveguide Layer of the Thin Film Generalized Waveguide Luneburg Lens

    Directory of Open Access Journals (Sweden)

    Ayryan E.A.

    2016-01-01

    Full Text Available A local variation in the thickness of the waveguide layer of integrated optics waveguide causes a local decrease of phase velocity, and hence bending of rays and of the wave front. The relationship of the waveguide layer thickness profile h (y, z with the distribution of the effective refractive index of the waveguide β (y, z is described in terms of a particular model of waveguide solutions of the Maxwell equations. In the model of comparison waveguides the support of the thickness irregularity of the waveguide layer Δh coincides with the support of inhomogeneity of the effective refractive index Δβ. A more adequate but more cumbersome model of the adiabatic waveguide modes allows them to mismatch supp Δh ⊃ supp Δβ. In this paper, we solve the problem of the Δh reconstruction on the base of given Δβ of the thin film generalized waveguide Luneburg lens in a model of adiabatic waveguide modes. The solution is found in the form of a linear combination of Gaussian exponential functions and in the form of a cubic spline for the cylindrically symmetric Δh (r and in the form of a cubic spline for Δβ (r.

  13. Incidence of posterior capsule opacification following the implantation of a foldable hydrophilic acrylic intraocular lens: a 4 year follow-up study

    Directory of Open Access Journals (Sweden)

    Priscilla de Almeida Jorge

    2014-08-01

    Full Text Available Purpose: To evaluate the incidence of posterior capsule opacification (PCO four years after the implantation of a hydrophilic acrylic intraocular lens (IOL. Methods: Fifty-eight randomly selected eyes from 58 patients were analyzed four years after phacoemulsification and Ioflex IOL implantation. The patients underwent an ophthalmic examination to detect PCO and a detailed medical history was obtained. The patients' charts were reviewed for their corrected distance visual acuity prior to the IOL implantation, as well as for one month postoperatively. The Student's t-test was used for statistical analysis. Results: The mean age of patients without PCO was 74.6 ± 9.5 years, compared to 70.3 ± 15 years in patients with PCO. Four years after surgery, 39 of the 58 eyes (67% had detectable PCO and 24 eyes (41.3% had decreased visual acuity (VA due to PCO. These patients were referred for Nd:YAG laser capsulotomy. Three patients (5.1% had decreased VA due to glaucoma, IOL opacification, or age-related macular degeneration. Twelve eyes (20.7% presented mild PCO with unchanged VA. Systemic arterial hypertension was reported by 45% of the patients, and in 3.5% of these cases this was associated with diabetes mellitus. Conclusion: This study found the incidence of PCO to be 67% four years after phacoemulsification and Ioflex IOL implantation.

  14. Capsule contraction syndrome

    Directory of Open Access Journals (Sweden)

    Mesut COŞKUN

    2009-06-01

    Full Text Available Capsule contraction syndrome occurs after fibrous metaplasia of lens proteins that leads to capsular bag contraction. Excessive front capsular wrinkling is seen in capsule contraction syndrome and there is an imbalance between powers supplying capsular integrity. This situation leads to zonular weakness. Capsule contraction syndrome is associated with pseudoexfoliation, older age, uveitis, pars planitis and myotonic muscular dystrophy. In order to decrease the risk of capsule contraction syndrome, front capsulerhexis area should be open as 5.5-6 mm diameter and a curysoft intraocular lens should be used. In order to prevent lens epithelial proliferation and metaplasia, lens epithelial cells at inferior surface of front capsule should be aspirated carefully. If postoperative capsular contraction detected, front capsulotomy should be performed by Nd-YAG laser at postoperative 2 to 3 weeks. In patients that Nd-YAG laser is unsuccessful, capsular tension should be decreased by surgical microincisions. In present study, we evaluated etiology, prevention and management of capsule contraction syndrome in the light of actual literature knowledge.

  15. Effects of cross-linking, capsule wall thickness, and compound hydrophobicity on aroma release from complex coacervate microcapsules.

    Science.gov (United States)

    Leclercq, Segolene; Milo, Christian; Reineccius, Gary A

    2009-02-25

    Microcapsules were produced by complex coacervation with a gelatin-gum acacia wall and medium-chain-triglyceride core. Dry capsules were partially rehydrated and then loaded with model aroma compounds covering a range of volatility, hydrophobicity, and molecular structure. An experimental design was prepared to evaluate the effects of cross-linking, wall/core ratio, and volatile load level on aroma release from capsules in a hot, aqueous environment. The real-time release on rehydration was measured by monitoring the headspace of a vessel containing the capsules to proton transfer reaction mass spectrometry (PTR-MS). Data collected showed no effects of cross-linking or wall/core ratio on volatile release in hot water for any of the volatiles studied. When comparing real-time release of the prepared coacervates to a spray-dried equivalent, there was no difference in the release from hot water but the release was slower when coacervates were added to ambient-temperature water. We found volatile release to be primarily determined by compound partition coefficients (oil/water and water/air) and temperature.

  16. Biometric, optical and physical changes in the isolated human crystalline lens with age in relation to presbyopia.

    Science.gov (United States)

    Glasser, A; Campbell, M C

    1999-06-01

    The biometric, optical and physical properties of 19 pairs of isolated human eye-bank lenses ranging in age from 5 to 96 years were compared. Lens focal length and spherical aberration were measured using a scanning laser apparatus, lens thickness and the lens surface curvatures were measured by digitizing the lens profiles and equivalent refractive indices were calculated for each lens using this data. The second lens from each donor was used to measure resistance to physical deformation by providing a compressive force to the lens. The lens capsule was then removed from each lens and each measurement was repeated to ascertain what role the capsule plays in determining these optical and physical characteristics. Age dependent changes in lens focal length, lens surface curvatures and lens resistance to physical deformation are described. Isolated lens focal length was found to be significantly linearly correlated with both the anterior and posterior surface curvatures. No age dependent change in equivalent refractive index of the isolated lens was found. Although decapsulating human lenses causes similar changes in focal length to that which we have shown to occur when human lenses are mechanically stretched into an unaccommodated state, the effects are due to nonsystematic changes in lens curvatures. These studies reinforce the conclusion that lens hardening must be considered as an important factor in the development of presbyopia, that age changes in the human lens are not limited to the loss of accommodation that characterizes presbyopia but that the lens optical and physical properties change substantially with age in a complex manner.

  17. Clinical application of the three-piece intraocular lens with optical surfaces entrapment by the posterior capsule in secondary intraocular lens implantation of the pediatric cataract for preventing lens dislocation%三片式人工晶状体光学面后囊孔嵌压术在预防儿童白内障二期人工晶状体脱位应用

    Institute of Scientific and Technical Information of China (English)

    王志亮

    2014-01-01

    目的 评价三片式人工晶状体光学面后囊孔嵌压术在预防儿童白内障二期人工晶状体脱位的临床疗效.方法 选择2009年10月至2010年11月期间在邢台市眼科医院就诊的5岁以内儿童无晶状体眼患儿76例152只眼.手术分为两组,A组(单纯人工晶状体睫状沟植入组)80只眼;B组(人工晶状体光学面后囊孔嵌压组)72只眼,随访3~19个月,平均11个月.结果 A组80只眼中有13只眼出现人工晶状体脱位,B组72只眼中只有1只眼出现人工晶状体瞳孔夹持,两组对比有统计学意义(x2=10.01,P<0.05).结论 使用光学部直径大的三片式人工晶状体,将其光学部确实地嵌压在后囊孔后,可以有效地预防儿童白内障二期人工晶状体植入术后人工晶状体脱位.%Objective To assess the clinical effects of the three-piece intraocular lens which optical surfaces were captured by the posterior capsule in secondary intraocular lens implantation of the pediatric cataract.Methods The 152 eyes of children less than 5 years old with aphakia were selected between October 2009 and November 2010.Operation was divided into two groups,Group A (the intraocular lens which were implanted at ciliary sulcus) 80 eyes,Group B (the intraocular lens which optical surfaces were captured by the posterior capsule) 72 eyes,follow-up duration was from 3 to 19 months,an average of 11 months.Results In group A,there were 13 eyes of intraocular lens dislocation.In group B,there was only 1 eye of intraocular lens captured by the pupil.There was significant difference between two groups (P <0.05).Conclusions The three-piece intraocular lens which big optical surfaces are captured by the posterior capsule can prevent the dislocation in secondary intraocular lens implantation of the pediatric cataract.

  18. Membrane thickness of microcapsules generated by complex coacervation method; Coacervation ho ni yoru microcapsule no capsule makuatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kage, H.; Ogura, H.; Matsuno, Y. [Kyushu Institute of Technology, Kitakyushu (Japan); Yada, N. [Idemitsu Engineering Co. Ltd., Tokyo (Japan); Kunimasa, M. [Takeda Chemical Industries, Ltd., Osaka (Japan)

    1996-03-10

    Microencapsulation of glass beads was carried out by complex coacervation of gelatin and acacia. Glass beads were chosen as the core material, because their surface was easily treated to be hydrophobic. We succeeded in excluding the complicated influence of emulsion on microencapsulation by the use of the coacervation method and a solid core material with narrow size distribution. The membrane of the microcapsule became thick with the increase of acetic acid dosage, while encapsulation was prevented by its excess addition because of the low pH value in the hardening process. Hydrophobizing of the core surface decreased the amount of acetic acid required to microencapsulate. A thin membrane was obtained due to the existence of salt, however the membrane thickness conversely became thick with a minute quantity of salt. 12 refs., 13 figs.

  19. 保留晶状体前囊减少硅油并发症的临床观察%Clinical observation on preservation of anterior lens capsule in the reduction of complications associated with silicone oil

    Institute of Scientific and Technical Information of China (English)

    宋宗明; 惠延年; 王琳; 曹小燕; 高前应

    2001-01-01

    Objective To observe the effect of preservation of anterior lens capsule on the incidence of complications associated with silicone oil. Methods Eighty-two patients(82 eyes)accepted trans pars plana vitrectomy combined with lensectomy,30 eyes with preservation of anterior lens capsule (PAC) and 52 eyes with no preservation of anterior capsule(NPAC)were observed.The incidence of complications was analysed to investigate whether PAC could reduce the complications associated with the usage of tamponade of silicone oil. Results The incidence was 50.0% in NPAC group,and 23.3% in PAC group(0.010<P<0.025).There were secondary glaucoma(21.1%),band keratopathy(13.5%)and corneal decompensation(9.6%)in NPAC group,while there was none of them in PAC group. Conclusion Preservation of anterior lens capsule is an effective measure to reduce the complicaltons associated with the tamponade of silicone oil.%目的观察保留晶状体前囊对硅油眼并发症的影响。方法 82只眼行玻璃体切割联合晶状体切除手术,其中30只眼术中保留完整晶状体前囊,52只眼未保留前囊,随访观察硅油并发症的发生情况。结果有前囊组硅油并发症的发生率为23.3%、无前囊组为50.0%(0.010<P<0.025)。后者主要有继发性青光眼(21.2%)、角膜带状变性(13.5%)和角膜内皮失代偿(9.6%)。结论保留晶状体前囊可以减少硅油眼并发症的发生

  20. Clinical observation on the efficacy of preserving anterior lens capsule in lensectomy combined with vitrectomy surgery%保留晶状体前囊的玻璃体晶状体切除术临床观察

    Institute of Scientific and Technical Information of China (English)

    史志洁; 吕晓贝

    2016-01-01

    Objective To observe the efficacy of preserving complete anterior lens capsule in lensectomy combined with vitrectomy.Methods The records of 68 eyes of 68 patients with vitreoretinal disease complicated with opaque lens were analyzed.The conventional three-channel pars plana vitrectomy and lensectomy were performed on all patients.The cental part of posterior capsule,nucleus and cortex of lens were resected completely by cutting head.The complete anterior capsule and peripheral part of the posterior capsule of lens were retained.Vitrectomy and retinal reattachment operations were performed after above operation.Results The patients were followed up for 12 months.The retina reattached in 66 cases of 68 patients (97.06%).Two cases(2.94%) occurred recurrent retinal detachment,which were reattached after silicone oil tamponade.The posterior chamber IOL implantation were performed at 6 months after vitrectomy and lensectomy surgery.Conclusion Preserving complete anterior lens capsule in lensectomy and vitrectomy surgery is a safe and effective treatment,which can shorten operative time and reduce complication.%目的 观察保留完整晶状体前囊的方法在晶状体切除联合玻璃体切除手术的临床效果.方法 对伴有晶状体浑浊的玻璃体视网膜疾病68例(68眼)进行观察分析.做常规平坦部三通道玻璃体切除及晶状体切除术,玻切头从后方切除中央部晶状体后囊、晶状体核及皮质,保留周边部晶状体后囊及完整的晶状体前囊,然后进行玻璃体切除、视网膜复位等手术操作.结果 术后随访12个月,本组68例中66例(97.06%)视网膜复位良好,视网膜脱离未复发;2例(2.94%)视网膜脱离复发经再次硅油填充后视网膜复位.术后6个月后行二期人工晶状体植入术.结论 保留完整晶状体前囊的晶状体切除联合玻璃体切除术治疗伴晶状体浑浊的玻璃体视网膜疾病是一种缩短手术时间和减少并发症的安全而有效的手术方式.

  1. Regenerated Cellulose Capsules for Controlled Drug Delivery, Part 2: Modulating Membrane Permeability by Incorporation of Depolymerized Cellulose and Altering Membrane Thickness.

    Science.gov (United States)

    Bhatt, Bhavik; Kumar, Vijay

    2015-12-01

    For application of regenerated cellulose (RC) membranes in capsule dosage forms, the methods to modify drug release from these membranes are described. Membranes were fabricated by blending native and depolymerized celluloses dissolved in dimethyl sulfoxide and paraformaldehyde solvent system, prior to casting on molds, precipitation in water, and thermal annealing. The effect of laminating layers of RC to fabricate membranes with increasing thickness was also investigated. Solute diffusion studies using ionic and hydrophobic solutes, as well as large protein molecules, were conducted in side-by-side diffusion cells. Microscopic as well as physiological evaluation of these membranes indicated that pore size, porosity, and water uptake decreased as the fraction of depolymerized cellulose increased in the membranes. Permeability analysis of small ionic and hydrophobic solutes indicated that the solute transport across the hydrated membrane occurs through diffusion in the water-filled pores that are formed in situ. The apparent path for solute diffusion increases as the fraction of depolymerized cellulose increases. Permeability analysis of large protein molecules indicated that the pore sizes and distribution in these membranes is heterogeneous. Increasing the membrane thickness by lamination of RC does not influence porosity but causes formation of dead-end pores because of blocking by subsequent laminate layers.

  2. Capsule endoscopy

    Science.gov (United States)

    ... It is about the size of a large vitamin pill. The person swallows the capsule, and it takes pictures all the way through ... can be started in the doctor's office. The capsule is the size of a large vitamin pill, about an inch (2.5 centimeters) long ...

  3. Capsule endoscopy

    DEFF Research Database (Denmark)

    Skovsen, Anders Peter; Burcharth, Jakob; Burgdorf, Stefan Kobbelgaard

    2013-01-01

    with ultrasound, MRI, and subsequently a capsule endoscopy. Six months later, the patient presented, and an abdominal CT-scan showed mechanical small bowel obstruction with suspicion of metallic foreign body and perforation. Laparotomy showed perforation, stenosis, and foreign body, approximately 5 cm from...... the ileocecal valve. A right hemicolectomy and distal ileectomy (60 cm) with an ileostomy were performed. On further inspection of resection, a capsule endoscope was found impacted in a stenosis. The ileostomy was later reversed without complications. Conclusion. It is important to be aware of the possibility...... of capsule retention, especially in patients with known or suspected Crohn's disease, due to the propensity of Crohn's disease to form stenosis of the bowel. In cases where a stenosis is suspected, it is warranted to perform a patency capsule swallow before subjecting the patient to a capsule endoscopy....

  4. Double-concave Lens Thickness and Refractive Index Determination of the Radius of Curvature%双凹厚透镜曲率半径和折射率的测定

    Institute of Scientific and Technical Information of China (English)

    徐建丽; 顾菊观; 张良锋

    2011-01-01

    It observes the image caused by spherical refraction of double-concave lens,utilizes this experimental phenomenon combined the image formula to determine the refractive index and curvature radius of double thick lens lens's front and back surface.It may extract the concave-concave thick lens' radius of curvature using two spherical surface catoptrical imaging,two methods can be comparable.This method can correct the error caused by neglecting lens thickness in the measurement of thin lens.%观察双凹厚透镜的球面反射成像,利用这一实验现象结合物像公式测定双凹厚透镜前后表面的曲率半径和折射率。利用两次球面反射成像可求出双凹厚透镜的曲率半径,两种方法可比较。对于薄透镜,这种方法可以修正在实际测量中忽略透镜厚度所产生的误差。

  5. Required Be Capsule Strength For Room Temperature Transport

    Energy Technology Data Exchange (ETDEWEB)

    Cook, B

    2005-03-21

    The purpose of this memo is to lay out the criteria for the Be capsule strength necessary for room temperature transport. Ultimately we will test full thickness capsules by sealing high pressures inside, but currently we are limited to both thinner capsules and alternative measures of capsule material strength.

  6. Capsule Endoscopy

    Science.gov (United States)

    ... because experience with it is limited and traditional upper endoscopy is widely available. Your doctor might recommend a capsule endoscopy procedure to: Find the cause of gastrointestinal bleeding. If you have unexplained bleeding in your digestive ...

  7. Poly(N-isopropylacrylamide)/poly(dopamine) capsules.

    Science.gov (United States)

    Zhang, Yan; Teo, Boon M; Goldie, Kenneth N; Städler, Brigitte

    2014-05-20

    Polymer capsules are an interesting concept considered in nanobiotechnology. Approaches that facilitate their assembly remain sought after. Poly(dopamine) (PDA) has been considered and successfully applied in this context. We recently demonstrated that PDA could be copolymerized with different types of poly(N-isopropylacrylamide) (pNiPAAm) to assemble mixed films on planar substrates. Herein, we transferred this approach onto colloidal substrates and characterized the film thickness depending on the film composition and template particles size. While the membrane of capsules assembled using 5 μm template particles exhibited strong dependency on the film composition, smaller templates led to capsules with similar membrane thickness. We then compared the permeability of different capsules using fluorescently labeled dextran and fluorescein. We found that the permeability of capsules was heavily dependent on the polymer composition and the template particle size. These fundamental findings contribute to the potential of these capsules, assembled in one-step, for biomedical applications.

  8. Operating condition and membrane thickness of microcapsules generated by complex coacervation method; Coacervation ho ni yoru seisei microcapsule no sosa joken to capsule makuatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kage, H.; Ogura, H.; Matsuno, Y. [Kyushu Institute of Technology, Kitakyushu (Japan); Kunimasa, M. [Takeda Chemical Industries, Ltd., Osaka (Japan); Kawahara, H. [Dainippon Ink Chemicals, Inc., Tokyo (Japan)

    1996-03-10

    Microencapsulation of glass beads with a narrow size distribution was carried out by complex coacervation of gelatin and acacia. The coacervation process was observed in detail and the effects of agitation strength, cooling rate, addition time of core material, addition plans of acetic acid and distilled water, and heating rate in the hardening process on membrane thickness of the microcapsules were investigated systematically. The membrane thickness of the microcapsules increased under the operating conditions where low cooling rate and relatively strong agitation were utilized, and pH was changed moderately by discrete addition of acetic acid or distilled water over a certain time interval. It became clear that strict control of operating conditions at 19{degree}C in the cooling process where the viscosity of the coacervate suddenly increases is remarkably important for the control of membrane thickness. 3 refs., 9 figs., 3 tabs.

  9. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.A.; Foreman, L.R.

    1997-07-08

    This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

  10. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, Mike A. (Albuquerque, NM); Foreman, Larry R. (Los Alamos, NM)

    1997-01-01

    This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

  11. A new endocapsular open ring for prevention of anterior and posterior capsule opacification

    Science.gov (United States)

    Pallikaris, Ioannis G; Stojanovic, Nela R; Ginis, Harilaos S

    2016-01-01

    Purpose The aim of this study is to demonstrate the functionality of a new design of a thick endocapsular open ring for prevention of anterior capsule opacification (ACO) and posterior capsule opacification (PCO). Setting The Institute of Vision and Optics, University of Crete and University Hospital of Heraklion, Crete, Greece. Design Prospective, interventional pilot study. Methods Fifteen patients (17 eyes) underwent cataract surgery with phacoemulsification. During surgery, a thick endocapsular open ring (peripheral capsule reconstructor) was inserted into the capsular bag, prior to intraocular lens (IOL) implantation. Six different models of IOL were implanted. Postoperatively, the degree of ACO and PCO was evaluated and described as none, mild, moderate, or severe. Results The mean follow-up period was 30±8.06 months (range: 12–36 months). At the last follow-up, mild PCO was observed in only three eyes and mild ACO in three patients. The centration of IOLs was good in all but one eye, which had a tilted IOL. Conclusion The results of this pilot study suggest that the implantation of a new design of thick endocapsular open ring is feasible and may contribute to the prevention of PCO and ACO after cataract surgery. PMID:27843291

  12. A new endocapsular open ring for prevention of anterior and posterior capsule opacification

    Directory of Open Access Journals (Sweden)

    Pallikaris IG

    2016-11-01

    Full Text Available Ioannis G Pallikaris, Nela R Stojanovic, Harilaos S Ginis Institute of Vision and Optics, Department of Medicine, University of Crete, Heraklion, Crete, Greece Purpose: The aim of this study is to demonstrate the functionality of a new design of a thick endocapsular open ring for prevention of anterior capsule opacification (ACO and posterior capsule opacification (PCO. Setting: The Institute of Vision and Optics, University of Crete and University Hospital of Heraklion, Crete, Greece. Design: Prospective, interventional pilot study. Methods: Fifteen patients (17 eyes underwent cataract surgery with phacoemulsification. During surgery, a thick endocapsular open ring (peripheral capsule reconstructor was inserted into the capsular bag, prior to intraocular lens (IOL implantation. Six different models of IOL were implanted. Postoperatively, the degree of ACO and PCO was evaluated and described as none, mild, moderate, or severe. Results: The mean follow-up period was 30±8.06 months (range: 12–36 months. At the last follow-up, mild PCO was observed in only three eyes and mild ACO in three patients. The centration of IOLs was good in all but one eye, which had a tilted IOL. Conclusion: The results of this pilot study suggest that the implantation of a new design of thick endocapsular open ring is feasible and may contribute to the prevention of PCO and ACO after cataract surgery. Keywords: intraocular implant, cataract, phacoemulsification, silicone

  13. Simulation of Blast Loading on an Ultrastructurally-based Computational Model of the Ocular Lens

    Science.gov (United States)

    2015-10-01

    public release; distribution unlimited The views, opinions and/or findings contained in this report are those of the author(s) and should not be...cells) is stressed by the passing shock wave. Traumatic cataract can result in a partially or fully clouded lens, complete dislo- cation of the lens...CSLM), and type IV collagen ultrastructure in lens capsule using cyro- electron tomography: 6b - On as-received porcine lens capsules, image type IV

  14. Study on Errors in Measuring the Focus of a Thin Lens Caused by Its Thickness%薄透镜厚度引起焦距测量误差的探究

    Institute of Scientific and Technical Information of China (English)

    高立华; 高松华; 林小锦

    2012-01-01

    The focal length was measured by the method of the object distance image distance,and the second imaging method,respectively.According to comparing the results of the two methods,the experiment conclusions were summarized as follow:the error caused by the thickness of thin lens through the method of the object distance image distance is equal to the difference between the method of the object distance image distance and the second imaging method.The measured focal length is smaller than the truth value of thin lens because the refracted light is close to optical center with the increase of the thickness of lens,therefore,the system error caused by the thickness should be revised,and the revised focal length value is fm+Δf.%从理想光具组的焦距公式出发,理论上分析了薄透镜厚度引起焦距测量的误差。采用物距像距法测定焦距,并与二次成像法测得的焦距比较,得出实验结论:采用物距像距法测量焦距,因薄透镜厚度引起的误差大小等于物距像距法测得的焦距与二次成像法测得的焦距之差;由于薄透镜的厚度越厚,折射越靠近光心,所测得的焦距值会偏小,因此对厚度引起的系统误差进行修正,得到修正后的焦距为fm+Δf。

  15. 白内障患者手术年龄和眼轴长度与晶状体厚度相关性分析%Correlation of operation age, axial length and lens thickness in cataract

    Institute of Scientific and Technical Information of China (English)

    孙小银; 徐唐

    2013-01-01

    AIM: To study the correlation of operation age, axial length and lens thickness in cataract eyes. METHODS: A total of 319 patients ( 393 eyes ) were divided into non -high myopia cataract group ( 198 patients, 237 eyes) and high myopia cataract group (121 patients, 156 eyes ) according to the axial length.Axial length and lens thickness were measured with A-mode ultrasound biometry. RESULTS:There were statistical difference in operation age (t=3.614, P=0.000), lens thickness (t=-3.081, P=0.002) between the non-high myopia cataract group and high myopia cataract group.The operation age of high myopia cataract group was younger than that of non-high myopia cataract group.The lens thickness in high myopia cataract group was thicker than that in non-high myopia cataract group. There was no significant correlation between age and axial length in the non-high myopia cataract group (r=-0.081, P=0.214).Age and lens thickness had positive correlation in the non-high myopia cataract group (r=0.178, P=0.006).Axial length and lens thickness had no significant correlation in the non-high myopia cataract group (r=-0.050, P=0.442). There was a negative correlation between age and lens thickness in the high myopia cataract group ( r=-0.211, P=0.008).Age and lens thickness had no significant correlation in the high myopia cataract group ( r=0.078, P=0.332).Axial length and lens thickness had positive correlation in the high myopia cataract group ( r=0.207, P=0.010). CONCLUSION: For the non -high myopia cataract patients, the cataract aggravate as the age increase.The operation age will not change as the axial length change. For the high myopia cataract patients, the cataract will not aggravate as the age increase, and the longer of the axial length, the younger of the operation age.%目的:探讨白内障患者手术年龄、眼轴长度、晶状体厚度之间相关性。方法:将319例393眼白内障患者根据眼轴长度分为非高度近视白内障组198例237

  16. Capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    Miguel Mu(n)oz-Navas

    2009-01-01

    Capsule endoscopy (CE) is a simple, safe, non-invasive, reliable technique, well accepted and tolerated by the patients, which allows complete exploration of the small intestine. The advent of CE in 2000 has dramatically changed the diagnosis and management of many diseases of the small intestine, such as obscure gastrointestinal bleeding, Crohn's disease, small bowel tumors, polyposis syndromes, etc. CE has become the gold standard for the diagnosis of most diseases of the small bowel. Lately this technique has also been used for esophageal and colonic diseases.

  17. Utility of MR arthrography in the diagnosis of adhesive capsulitis

    Energy Technology Data Exchange (ETDEWEB)

    Manton, G.L.; Schweitzer, M.E.; Weishaupt, D.; Karasick, D. [Dept. of Radiology, Thomas Jefferson Univ. Hospital, Philadelphia, PA (United States)

    2001-06-01

    Objective. Arthrographically, adhesive capsulitis is characterized by decreased joint volume; histologically, the capsule and synovium are thickened. We therefore compared using MR arthrography the joint volumes and capsule/synovial thickness of patients with and without adhesive capsulitis in order to assess the utility of MR arthrography in diagnosing adhesive capsulitis.Design and patients. The 1.5 T MR arthrography images of 28 subjects with (n=9) and without (n=19) adhesive capsulitis were compared. Adhe- sive capsulitis was diagnosed when there was an injected glenohumeral joint volume of less than 10 ml. Two masked observers working in consensus assessed the images for the relative amount of fluid in the biceps tendon sheath and axillary recess, corrugation at the margin of the capsule, capsule/synovial thickness, abnormalities of the rotator interval capsule, and for the presence of a cuff tear.Results. There was a trend towards differences in capsular and synovial thickness (P>0.07) between the subjects with and without adhesive capsulitis; however, the controls had thicker synovium/capsules. Surprisingly, the amount of fluid in the axillary recess and biceps tendon sheath was not significantly different between the groups (P>0.25). There were more tears of the rotator cuff in controls than in patients with adhesive capsulitis (6, 3 vs 1, 1: complete, partial). Also, both corrugation (7 vs 0) and interval abnormalities (7 vs 0) were more common in the controls.Conclusion. There appear to be no useful MR arthrographic signs of adhesive capsulitis. Capsular/synovial thickness, static fluid volume, and the presence of corrugation are inconclusive as MR arthrographic signs for distinguishing shoulders with adhesive capsulitis from those without. (orig.)

  18. BASICS OF COMPOUNDING: Capsules.

    Science.gov (United States)

    Allen, Loyd V

    2016-01-01

    Capsules have been used for administering medications to patients more than a century and have an important role in drug delivery. When a primary care provider prescribes a tablet, the choice is usually, but not always, limited to commercially available products. A capsule, however, can be prepared extemporaneously, which provides dosing flexibility for the primary care provider and the pharmacist. This article discusses the definitions/types of capsules, their applications, composition, preparation, capsule sizes, the encapsulation process, capsule cleaning, physiochemical considerations, quality control in the preparation of capsules, packaging/storage, stability, and patient counseling to determine the proper capsule size. Also, provided are sample formulations.

  19. Role of shocks and mix caused by capsule defects

    Science.gov (United States)

    Bradley, P. A.; Cobble, J. A.; Tregillis, I. L.; Schmitt, M. J.; Obrey, K. D.; Glebov, V.; Batha, S. H.; Magelssen, G. R.; Fincke, J. R.; Hsu, S. C.; Krasheninnikova, N. S.; Murphy, T. J.; Wysocki, F. J.

    2012-09-01

    An Eulerian code with a turbulent mix model is used to model a set of plastic (CH) ablator capsules with and without equatorial grooves. The "perfect" capsule results were used to calibrate simulations of capsules with equatorial grooves of different depths that provided information on increasingly perturbed implosions. Simulations with a turbulence model were able to calculate the same yield over mix (YOM) ratio (experiment/mix simulation) of 0.2 to 0.3 for thin (8-μm thick) and thick shell (15-μm thick) capsules with no grooves and thin capsules with shallow grooves. When the capsules have deep grooves, the YOM ratio increases to greater than unity, probably because the deformed shocks focus too strongly on the symmetry axis in our two-dimensional simulations. This is supported by a comparison of simulated and experimental x-ray images.

  20. Incidência de opacificação de cápsula posterior em pacientes submetidos à facoemulsificação e implante de lentes intra-oculares acrílicas hidrofílicas expansíveis Incidence of posterior capsule opacification in patients submitted to phacoemulsification and expandable acrylic intraocular lens implantation

    Directory of Open Access Journals (Sweden)

    Hilton Arcoverde Gonçalves de Medeiros

    2006-06-01

    Full Text Available OBJETIVO: Avaliar prospectivamente os resultados das lentes intra-oculares de polímeros expansíveis implantadas em pacientes submetidos à facoemulsificação, quanto à incidência de opacificação de cápsula posterior, levando em consideração a biocompatibilidade das lentes expansíveis. MÉTODOS: O grupo de estudo foi composto por 830 pacientes, 1.200 olhos, que foram submetidos a facoemulsificação, utilizando a mesma técnica, variando-se apenas o diâmetro da capsulorrexe, pelo mesmo cirurgião, no período de 1998 a 2002, com implante de lente intra-ocular hidrofílica expansível. O acompanhamento médio foi de 2,4 anos, variando de seis meses a quatro anos. RESULTADOS: O número total de opacificação de cápsula posterior foi de 54 casos. CONCLUSÃO: A incidência de opacificação de cápsula posterior encontrada no grupo foi de 4,6%.PURPOSE: To evaluate prospectively the results of expandable acrylic intraocular lenses in patients submitted to phacoemulsification as regard posterior capsule opacification. METHODS: The study group consisted of 830 patients, 1,200 eyes that underwent phacoemulsification from 1998 to 2002, by the same surgeon, using the same technique but with different diameters of capsulorrhexis, with expandable hydrophilic acrylic intraocular lens implantation. The mean follow-up was 2.4 years, ranging from 6 months to 4 years. RESULTS: The total number of posterior capsule opacification was 54 cases. CONCLUSIONS: The incidence of posterior capsule opacification was 4.6% in these patients.

  1. Electrical inhibition of lens epithelial cell proliferation: an additional factor in secondary cataract?

    OpenAIRE

    Wang, Entong; Reid, Brian; Lois, Noemi; Forrester, John V.; McCaig, Colin D.; Zhao, Min

    2005-01-01

    Cataract is the most common cause of blindness but is at least curable by surgery. Unfortunately, many patients gradually develop the complication of posterior capsule opacification (PCO) or secondary cataract. This arises from stimulated cell growth within the lens capsule and can greatly impair vision. It is not fully understood why residual lens epithelial cell growth occurs after surgery. We propose and show that cataract surgery might remove an important inhibitory factor for lens cell g...

  2. Inadvertent Trypan Blue Staining of Posterior Capsule during Cataract Surgery Associated with “Argentinian Flag” Event

    Directory of Open Access Journals (Sweden)

    Robert A. Prinzi

    2016-01-01

    Full Text Available Trypan blue is common in visualizing the anterior capsule during cataract surgery. Inadvertent staining of the posterior capsule during phacoemulsification is a rare complication and there are few reports in the literature. The proposed mechanism of posterior capsule staining in previous reports includes a compromised zonular apparatus or iris retractors facilitating the posterior flow of trypan blue. We report the first case of trypan blue staining of the posterior capsule associated with the “Argentinian flag” sign. In our case, the “Argentinian flag” allowed the trypan blue to seep between the posterior capsule and the lens, staining the anterior surface of the posterior capsule.

  3. Esophageal capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    Ignacio Fernandez-Urien; Cristina Carretero; Raul Armendariz; Miguel Mu(n)oz-Navas

    2008-01-01

    Capsule endoscopy is now considered as the first imaging tool for small bowel examination.Recently,new capsule endoscopy applications have been developed,such as esophageal capsule endoscopy and colon capsule endoscopy.Esophageal capsule endoscopy in patients with suspected esophageal disorders is feasible and safe,and could be also an alternative procedure in those patients refusing upper endoscopy.Although large-scale studies are needed to confirm its utility in GERD and cirrhotic patients,current results are encouraging and open a new era in esophageal examination.

  4. Colon capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    Ignacio Fernandez-Urien; Cristina Carretero; Ana Borda; Miguel Mu(n)oz-Navas

    2008-01-01

    Wireless capsule endoscopy has become the first imaging tool for small bowel examination.Recently,new capsule endoscopy applications have been developed,such as esophageal capsule endoscopy and colon capsule endoscopy.Clinical trials results have shown that colon capsule endoscopy is feasible,accurate and safe in patients suffering from colonic diseases.It could be a good alternative in patients refusing conventional colonoscopy or when it is contraindicated.Upcoming studies are needed to demonstrate its utilty for colon cancer screening and other indications such us ulcerative colitis.Comparative studies including both conventional and virtual colonoscopy are also required.

  5. Motion of an elastic capsule in a square microfluidic channel.

    Science.gov (United States)

    Kuriakose, S; Dimitrakopoulos, P

    2011-07-01

    In the present study we investigate computationally the steady-state motion of an elastic capsule along the centerline of a square microfluidic channel and compare it with that in a cylindrical tube. In particular, we consider a slightly over-inflated elastic capsule made of a strain-hardening membrane with comparable shearing and area-dilatation resistance. Under the conditions studied in this paper (i.e., small, moderate, and large capsules at low and moderate flow rates), the capsule motion in a square channel is similar to and thus governed by the same scaling laws with the capsule motion in a cylindrical tube, even though in the channel the cross section in the upstream portion of large capsules is nonaxisymmetric (i.e., square-like with rounded corners). When the hydrodynamic forces on the membrane increase, the capsule develops a pointed downstream edge and a flattened rear (possibly with a negative curvature) so that the restoring tension forces are increased as also happens with droplets. Membrane tensions increase significantly with the capsule size while the area near the downstream tip is the most probable to rupture when a capsule flows in a microchannel. Because the membrane tensions increase with the interfacial deformation, a suitable Landau-Levich-Derjaguin-Bretherton analysis reveals that the lubrication film thickness h for large capsules depends on both the capillary number Ca and the capsule size a; our computations determine the latter dependence to be (in dimensionless form) h ~ a(-2) for the large capsules studied in this work. For small and moderate capsule sizes a, the capsule velocity Ux and additional pressure drop ΔP+ are governed by the same scaling laws as for high-viscosity droplets. The velocity and additional pressure drop of large thick capsules also follow the dynamics of high-viscosity droplets, and are affected by the lubrication film thickness. The motion of our large thick capsules is characterized by a Ux-U ~ h ~ a(-2

  6. Optimization of Zoom Lens with Discrete State of Liquid Lens Elements by Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Cheng-Mu Tsai

    2015-01-01

    Full Text Available This paper is to employ liquid lens elements to design a lens with zoom function by using the genetic algorithm (GA optimization. The liquid lens elements used in the proposal can apply voltage adjustment to generate the electrical field that induces the liquid with electric conductivity to vary the surface curvature between two different kinds of liquids. According to the voltage level, the liquid lens element makes the discrete variation of the curvature and thickness realize the zoom function without moving the lens groups so that the overall length can be reduced. However, it is difficult to design the zoom lens under the discrete variation of the curvature and thickness in the liquid lens elements and the mechanical space that is constantly limited. The GA offers a flexible way for lens optimization. We regarded the spot size as the fitness function to look for the optimum curvatures, thickness, and the corresponding statuses of liquid lens elements for the zoom lens. As a result, the zoom lens with constant space can be realized by running the selection, crossover, and mutation operation in the GA optimization.

  7. Rho GTPase inactivation impairs lens growth and integrity.

    Science.gov (United States)

    Rao, Vasantha; Wawrousek, Eric; Tamm, Ernst R; Zigler, Samuel

    2002-02-01

    To elucidate the significance of Rho GTPase signaling on lens growth and structural integrity, we have selectively inactivated Rho GTPase in the ocular lens. To achieve this tissue-specific inactivation, a transgene encoding the C3-exoenzyme from Clostridium botulinum has been expressed in mice under transcriptional control of the lens-specific alphaA-crystallin promoter. C3-exoenzyme is known to selectively inactivate all Rho GTPase isoforms by ADP-ribosylating an asparagine residue at position 41. Mice expressing the C3-exoenzyme transgene exhibited selective ocular defects, including cataract and microphthalmia. Extralenticular effects included ocular hemorrhage (blood accumulation in the anterior and posterior chambers of the eye) and abnormalities of the iris including focal attachments to lens and cornea (synechiae). C3-transgene expression was found only in the lens and not in the other ocular tissues as determined by RT-PCR analysis. Histologic examination of the eyes of C3 transgenic mice from two independent lines revealed extensive abnormalities of the lens, including defective fiber cell differentiation and elongation, ruptured posterior lens capsule, and thickened anterior lens capsule. Electron microscopic analysis of hemorrhaged C3 eyes showed abnormalities in the posterior hyaloid vessels. Collectively these data reveal the importance of Rho GTPase signaling in regulating lens growth and maintenance of lens transparency.

  8. Pars Plana Vitrectomy in Treatment of Lens Injury

    Directory of Open Access Journals (Sweden)

    Remzi Avcı

    2013-01-01

    Full Text Available Lens injury due to traumas may present as loss of capsule integrity, cataract, lens subluxation, or lens luxation. In addition, lens subluxation and lens luxation may occur in pseudophakic patients due to trauma. Clear corneal, scleral or sclero-corneal phacoemulsification surgery, pars plana vitrectomy, pars plana vitrectomy with phaco-fragmentation, or pars plana vitrectomy with removal through corneal incision techniques are used in the treatment of lens injury due to traumas. Intraocular lens can be implanted in the bag, sulcus, or anterior chamber during the surgery. Depending on the circumstances, scleral fixated intraocular lenses or iris-claw lenses may also be preferred. Rehabilitation of such patients is not of a great concern today, with the advanced level of vitreoretinal surgery and cataract surgery techniques and with the current state of technology. (Turk J Ophthalmol 2013; 43: 51-4

  9. NIF capsule performance modeling

    OpenAIRE

    Weber S.; Callahan D.; Cerjan C.; Edwards M.; Haan S.; Hicks D.; Jones O.; Kyrala G.; Meezan N.; Olson R; Robey H.; Spears B.; Springer P.; Town R.

    2013-01-01

    Post-shot modeling of NIF capsule implosions was performed in order to validate our physical and numerical models. Cryogenic layered target implosions and experiments with surrogate targets produce an abundance of capsule performance data including implosion velocity, remaining ablator mass, times of peak x-ray and neutron emission, core image size, core symmetry, neutron yield, and x-ray spectra. We have attempted to match the integrated data set with capsule-only simulations by adjusting th...

  10. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...... of probabilistic functionalism, and concerns the environment and the mind, and adaptation by the latter to the former. This entry is about the lens model, and probabilistic functionalism more broadly. Focus will mostly be on firms and their employees, but, to fully appreciate the scope, we have to keep in mind...

  11. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...

  12. [Femtosecond laser-assisted lens surgery depending on interface design and laser pulse energy: results of the first 200 cases].

    Science.gov (United States)

    Mayer, W J; Klaproth, O K; Ostovic, M; Hengerer, F H; Kohnen, T

    2014-12-01

    This study was designed to evaluate the effectiveness and safety of femtosecond laser-assisted lens surgery depending on interface design and laser pulse energy settings. In this non-randomized, consecutive case series200 eyes underwent femtosecond laser-assisted (LenSx, Alcon) lens surgery between November 2012 and June 2013. Group 1 consisted of 85 eyes with 60 cataracts and 25 refractive lens exchanges (RLE) which were treated with a curved direct contact interface, and group 2 consisting of 115 eyes with 72 cataracts and 43 RLEs treated with a modified interface using an additional soft contact lens (SoftFit™, Alcon) between the corneal surface and the interface. The degree of opacity of the lens in cataract eyes was measured with a Scheimpflug camera. Afterwards, phacoemulsification was performed with intraocular lens (IOL) implantation in all eyes. Primary endpoints were the effective phacoemulsification time (EPT), the average laser treatment time and the occurrence of intraoperative complications. The mean EPT in group 1 was 1.62 ± 1.12 s (cataract 1.94 ± 1.31 s, RLE 1.29 ± 1.01 s) and in group 2 the mean EPT was 1.66 ± 0.92 s (cataract 1.98 ± 1.28 s, RLE 1.33 ± 1.22 s, p = 0.32 between groups). The laser treatment lasted on average 48.90 ± 2.45 s (group 1) and 49.70 ± 2.87 s (group 2) with an average lens fragmentation thickness of 3401.48 ± 401.12 µm (all groups). In four cases of group 1, a second applanation of the interface was necessary. Furthermore, one anterior capsule tear, 39 cases of intraoperative wrinkling of the corneal surface and 21 cases in which the corneal incision had to be opened manually were documented in group 1. In group 2 no second applanation of the interface, no anterior capsule tears and no corneal wrinkling but 9 cases with a manual opening of corneal incisions were documented (p interface and reduced laser pulse energy.

  13. Lens regeneration in juvenile and adult rabbits measured by image analysis.

    Science.gov (United States)

    Gwon, A E; Jones, R L; Gruber, L J; Mantras, C

    1992-06-01

    Secondary cataract growth commonly occurs after extracapsular cataract extraction. The proliferation of this regrowth occurs at rates related to many factors. In this study, the authors analyzed the amount of lens regeneration after endocapsular lens extraction that leaves the anterior and posterior capsules relatively intact. The analysis was performed in New Zealand albino rabbits with the aid of image analysis measurements in young and adult animals. The effect of low vacuum suction of the anterior capsule on the growth was determined. Lens regeneration was used as a measure of the growth potential of the leftover epithelial cells in the capsule bag. The results showed that lens regeneration was significantly faster in younger rabbits. However, low vacuum suction had no effect on the growth rate. Potential therapeutic agents for preventing secondary cataracts may be better analyzed with image analysis processing of lens regeneration, a precise and rapid measurement technique.

  14. Hollow microporous organic capsules

    National Research Council Canada - National Science Library

    Li, Buyi; Yang, Xinjia; Xia, Lingling; Majeed, Muhammad Irfan; Tan, Bien

    2013-01-01

    Fabrication of hollow microporous organic capsules (HMOCs) could be very useful because of their hollow and porous morphology, which combines the advantages of both microporous organic polymers and non-porous nanocapsules...

  15. Engineering Stable Hollow Capsules

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ Scientists at the CAS Institute of Chemistry have been succeeded in fabricating stable hollow capsules by extending covalent layer-by-layer self-assembly(CSA)technique from 2-dimensional to 3-dimensional systems.

  16. Posterior capsule opacification. Part 1: Experimental investigations.

    Science.gov (United States)

    Nishi, O

    1999-01-01

    Posterior capsule opacification (PCO) is the most frequent complication associated with decreased vision after cataract surgery. Previous methods of preventing PCO have not proven to be practical, effective, and safe for routine clinical procedure, but some novel concepts and methods have recently been developed. This 2-part review looks at clinical and experimental investigations of PCO, focusing on developments since 1992. Clinical aspects will be presented in a later issue. This paper addresses (1) in vitro models for PCO research; (2) pathophysiology and molecular biology of lens epithelial cells (LECs); (3) prevention of PCO. Of special interest are methods of culturing human LECs obtained by capsulotomy during cataract surgery, including those obtained with an intact capsular bag, to provide an in vitro model for investigating the pathophysiology of LECs; the effect of a sharp bend in the lens capsule that induces contact inhibition of migrating LECs; more specific inhibition of migrating LECs using an immunotoxin, b-FGF-saporin, or EDTA and RGD-peptides.

  17. Study of Contact Melting Inside Isothermally Heated Vertical Cylindrical Capsules

    Institute of Scientific and Technical Information of China (English)

    ChenWenzhen; ChengShangmo; 等

    1993-01-01

    Close-contact melting processes of phase change material(PCM) inside vertical cylindrical capsule are studied.PCM are heated bhy the capsule isothermalyy at the bottom and side.The theoretical formulas of the melting rate and thickness of liquid layer during the heat transfer process are obtained by analysis,which are convenient for engineering predictions.Finally,the factors that affect melting are discussed.and conclusions are drawn.

  18. Simulation of Blast Loading on an Ultrastructurally-based Computational Model of the Ocular Lens

    Science.gov (United States)

    2013-10-01

    tion that may require cataract surgery ( implantation of an intraocular lens (IOL)) are not well understood in comparison to the mature and ever-improving...showing promise, and we are confi- dent we can obtain good structural identification of lens fiber cell structure pre and post-test. This will be used...being investigated as part of the research. References MR. Banitt, JB. Malta, SL. Mian, and H.K Soong. Rupture of anterior lens capsule from blunt

  19. NIF capsule performance modeling

    Directory of Open Access Journals (Sweden)

    Weber S.

    2013-11-01

    Full Text Available Post-shot modeling of NIF capsule implosions was performed in order to validate our physical and numerical models. Cryogenic layered target implosions and experiments with surrogate targets produce an abundance of capsule performance data including implosion velocity, remaining ablator mass, times of peak x-ray and neutron emission, core image size, core symmetry, neutron yield, and x-ray spectra. We have attempted to match the integrated data set with capsule-only simulations by adjusting the drive and other physics parameters within expected uncertainties. The simulations include interface roughness, time-dependent symmetry, and a model of mix. We were able to match many of the measured performance parameters for a selection of shots.

  20. Cataract Surgery for Tilted Lens in Peters' Anomaly Type 2

    Directory of Open Access Journals (Sweden)

    Tadayuki Nishide

    2013-09-01

    Full Text Available Background: Cases of cataract surgery without penetrating keratoplasty in patients with Peters' anomaly are very rare. We report a case of Peters' anomaly type 2 with tilted lens due to synechia between the lens and iris that was treated with cataract surgery without penetrating keratoplasty. Case Presentation: A 16-year-old girl had Peters' anomaly in both eyes. Corneal opacity was severe in the left eye due to high-grade dysgenesis of the anterior segment. In the right eye, corneal opacity had spread from the center of the cornea to the inferotemporal side, and there was synechia between the iris and corneal endothelium from the inferonasal side to the inferotemporal side. Opacity was observed in the anterior pole of the lens, and there was synechia between the anterior iris and the lens. Ultrasound biomicroscopy (UBM revealed that the lens was tilted because of synechia. The tilted lens induced astigmatism, which reduced visual acuity to 20/250, in conjunction with a cataract. Cataract surgery was performed; the synechia between the lens capsule and the iris was severed, an intraocular lens was inserted, and the tilt was repaired. UBM was used postoperatively to confirm that the lens capsule synechia had been corrected and that the intraocular lens was not tilted. As a result, visual acuity improved to 20/100; glaucoma and expansion of corneal opacity were not observed. Conclusions: Severing of the synechia between the cataract and iris, during cataract surgery, in a patient with Peters' anomaly type 2 resulted in favorable postoperative visual acuity.

  1. A gradient of matrix-bound FGF-2 and perlecan is available to lens epithelial cells.

    Science.gov (United States)

    Wu, Weiju; Tholozan, Frederique M; Goldberg, Martin W; Bowen, Leon; Wu, Junjie; Quinlan, Roy A

    2014-03-01

    Fibroblast growth factors play a key role in regulating lens epithelial cell proliferation and differentiation via an anteroposterior gradient that exists between the aqueous and vitreous humours. FGF-2 is the most important for lens epithelial cell proliferation and differentiation. It has been proposed that the presentation of FGF-2 to the lens epithelial cells involves the lens capsule as a source of matrix-bound FGF-2. Here we used immunogold labelling to measure the matrix-bound FGF-2 gradient on the inner surface of the lens capsule in flat-mounted preparations to visualize the FGF-2 available to lens epithelial cells. We also correlated FGF-2 levels with levels of its matrix-binding partner perlecan, a heparan sulphate proteoglycan (HSPG) and found the levels of both to be highest at the lens equator. These also coincided with increased levels of phosphorylated extracellular signal-regulated kinase 1 and 2 (pERK1/2) in lens epithelial cells that localised to condensed chromosomes of epithelial cells that were Ki-67 positive. The gradient of matrix-bound FGF-2 (anterior pole: 3.7 ± 1.3 particles/μm2; equator: 8.2 ± 1.9 particles/μm2; posterior pole: 4 ± 0.9 particles/μm2) and perlecan (anterior pole: 2.1 ± 0.4 particles/μm2; equator: 5 ± 2 particles/μm2; posterior pole: 1.9 ± 0.7 particles/μm2) available at the inner lens capsule surface was measured for the bovine lens. These data support the anteroposterior gradient hypothesis and provide the first measurement of the gradient for an important morphogen and its HSPG partner, perlecan, at the epithelial cell-lens capsule interface.

  2. Contact lens in keratoconus

    Directory of Open Access Journals (Sweden)

    Varsha M Rathi

    2013-01-01

    Full Text Available Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP lenses, soft and soft toric lenses, piggy back contact lenses (PBCL, hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL.

  3. Structural analysis and design optimization of double shell system for fuel irradiation capsule

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. S.; Choi, Y. J.; Choi, M. H.; Rhu, C. H.; Go, J. H.; Hong, S. J.; Lee, H. C. [Chungnam National Univ., Taejeon (Korea)

    2001-04-01

    During irradiation tests, the fuel capsule expect that the high temperature will be occur. Thus, to estimate the structural integrity of fuel capsule during irradiation tests, it is needed to perform structural analysis and to obtain the information of mechanical characteristics for the system. In this study, the structure analysis of the circular capsule is performed using the finite element analysis program, ANSYS and analysis calculation. To obtain the mechanical characteristics of the circular capsule structure such as stresses, critical buckling loads and natural frequencies et al. the static nd model analysis are conducted. The effects of various wall thicknesses of capsule outer tube and support tube for circular capsule are obtained. Also, the effects of boundary conditions and principal materials of the fuel capsule on the structural behavior are investigated. The FE results are compared with the analysis results in case of possible. 13 refs., 34 figs., 10 tabs. (Author)

  4. Wireless capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    A Mata; J Llach; JM Bordas

    2008-01-01

    Wireless capsule endoscopy is a new technique that allows complete exploration of the small bowel without external wires. Its role has been analyzed in many small bowel diseases such as obscure gastrointestinal bleeding, Crohn's disease and gastrointestinal polyposis syndromes with promising results. Studies on other pathologies (I.e. Small bowel tumour, celiac disease) are under evaluation to define the role of this technique.

  5. The linear-viscoelastic behaviour of a dispersion of transversely rigid spherical capsules

    NARCIS (Netherlands)

    de Bruin, G.J.; de Bruijn, R.A.; Mellema, J.

    1985-01-01

    A rheological model has been derived for the linear-viscoelastic behaviour of a dispersion of transversely rigid spherical capsules. The model incorporates finite thickness of the elastic shell of the capsules, anisotropy of the mechanical properties of the interface and finite volume fraction. The

  6. Management of adhesive capsulitis

    Directory of Open Access Journals (Sweden)

    Stupay KL

    2015-08-01

    Full Text Available Kristen L Stupay,1 Andrew S Neviaser2 1Tulane University School of Medicine, New Orleans, LA, USA; 2George Washington University Medical Faculty Associates, Washington, DC, USA Abstract: Adhesive capsulitis of the shoulder is a condition of capsular contracture that reduces both active and passive glenohumeral motion. The cause of adhesive capsulitis is not known but it is strongly associated with endocrine abnormalities such as diabetes. Diverse terminology and the absence of definitive criteria for diagnosis make evaluating treatment modalities difficult. Many treatment methods have been reported, most with some success, but few have been proved to alter the natural course of this disease. Most afflicted patients will achieve acceptable shoulder function without surgery. Those who remain debilitated after 8–12 months are reasonable candidates for invasive treatments. Here, the various treatment methods and the data to support their use are reviewed. Keywords: frozen shoulder, stiff shoulder, periarthritis, painful shoulder 

  7. Out-of-the-bag intraocular lens dislocation: outcomes of posterior chamber intraocular lens exchange, risk factors, and prevention

    Institute of Scientific and Technical Information of China (English)

    ZHENG Dan-ying; CHEN Li-na; SUN Yi; SHAO Ying-feng; LIANG Jing-li; LIU Yi-zhi

    2010-01-01

    Background Dislocation of posterior chamber intraocular lens is one of the most common complications of intraocular lens implantation. Lens exchange is an effective solution to this unsatisfactory status. This study was conducted to analyze the possible predisposing factors for out-of-the-bag posterior chamber intraocular lens dislocation and to study the outcomes of lens exchange surgery.Methods Thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation who underwent posterior chamber intraocular lens exchange in Zhongshan Ophthalmic Center of Sun Yat-sen University (Guangdong,China) from January 2003 to October 2009 were included. A 6-month follow-up was completed. The causes for out-of-the-bag intraocular lens dislocation and visual outcomes of posterior chamber intraocular lens exchange were analyzed. The out-of-the-bag intraocular lens dislocation was diagnosed on the basis of the findings from slit-lamp microscope and B-ultrasound. The dislocated intraocular lens was explanted. Reimplantation of a new posterior chamber intraocular lens was performed in each case using standardized surgical procedures.Results In this study, a total of thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation underwent posterior chamber intraocular lens exchange surgery. Causes for out-of-the-bag intraocular lens dislocation included posterior capsule rupture during the initial cataract extraction procedure (23 eyes, 63.8%), trauma (5 eyes,13.9%), neodymium-doped yttrium aluminium garnet (Nd:YAG) laser-induced dislocation (2 eyes, 5.6%), the status after vitrectomy (2 eyes, 5.6%) and unidentifiable etiology (4 eyes, 11.1%). Symptoms of these patients mainly included decrease in visual acuity (17 cases, 47.2%), blurred vision (16 cases, 44.4%), glare (1 case, 2.8%), diplopia (1 case,2.8%), and halo (1 case, 2.8%). Intraocular lens dislocation into the posterior vitreous cavity (29 eyes, 80.5%), anterior chamber (1

  8. Capsule-train stability

    Science.gov (United States)

    Bryngelson, Spencer H.; Freund, Jonathan B.

    2016-07-01

    Elastic capsules flowing in small enough tubes, such as red blood cells in capillaries, are well known to line up into regular single-file trains. The stability of such trains in somewhat wider channels, where this organization is not observed, is studied in a two-dimensional model system that includes full coupling between the viscous flow and suspended capsules. A diverse set of linearly amplifying disturbances, both long-time asymptotic (modal) and transient (nonmodal) perturbations, is identified and analyzed. These have a range of amplification rates and their corresponding forms are wavelike, typically dominated by one of five principal perturbation classes: longitudinal and transverse translations, tilts, and symmetric and asymmetric shape distortions. Finite-amplitude transiently amplifying perturbations are shown to provide a mechanism that can bypass slower asymptotic modal linear growth and precipitate the onset of nonlinear effects. Direct numerical simulations are used to verify the linear analysis and track the subsequent transition of the regular capsule trains into an apparently chaotic flow.

  9. Application of Foldable Intraocular Lens in Multiple Types of Cataract

    Institute of Scientific and Technical Information of China (English)

    Songtao Yuan; Qinghuai Liu; Qing Jiang; Nanrong Yuan

    2002-01-01

    Objective: To evaluate the clinical results of implantation of foldable intraocular lens inmultiple types of cataract.Methods: This retrospective study comprised 162 eyes of 148 patients undergoingphacoemulsification and implantation of foldable intraocular lens, some of whom under-went combined pars plana vitrectomy or trabeculectomy or silicone oil removal. Theperiod of follow-up was from 3 months to 17 months.Results: There is slight reaction postoperatively in all cases. The postoperative uncorrectedvisual acuites was from 0. 05 to 1.2, patient with 0.6 or above acuity were 70.98%. Aneodymium: YAG capsulotomy was required in 5 eyes. Posterior capsule ruptured in 1eyes, and a PMMA intraocular lens was implanted in ciliary sulcus. In one eye, a lenswas removed because of recurrence of retina detachment.Conclusions: The application of foldable intraocular lens in multiple types of cataract issafe, and there is a slight postoperative reaction. less complications , and fast visualacuity recovery.

  10. Capsule endoscopy in celiac disease

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Video capsule endoscopy is an attractive and patient- friendly tool that provides high quality images of the small bowel. Obscure gastrointestinal bleeding is the primary and most evaluated indication to capsule endoscopy; however, indications are expanding and a small number of preliminary reports have been presented concerning the role of video capsule endoscopy in the diagnosis of celiac disease. The purpose of this review is to update the current knowledge and to hypothesize on future perspectives of the use of video capsule endoscopy in patients with celiac disease.

  11. Pentagonal shaped microstrip patch antenna in wireless capsule endoscopy system

    Directory of Open Access Journals (Sweden)

    Bondili Kohitha Bai

    2012-01-01

    Full Text Available Wireless capsule endoscopy is a best option for exploring inaccessible areas of small intestine for inspection of gastrointestinal tract. This technique brings less pain compare to conventional endoscopy technique. The wireless endoscopy system comprises of three main modules: an ingestible capsule that is swallowed by the patient, an external control unit and display device for image display. In this paper we proposed pentagonal shape microstrip patch antenna for wireless capsule endoscopy system. Inhibiting characteristics of a single microstrip patch like low gain, light weight, thin thickness and smaller bandwidth, make it more popular. This kind of antenna is aggressive miniaturized to meet the requirements of the wireless capsule endoscope. The simulation results show that the designed Circular Polarization (CP pentagonal shaped microstrip patch antenna gives axial ratio of 0.6023 at 2.38 GHz and CP axial ratio bandwidth of 36MHz with 1.5%. The antenna designed for wireless capsule endoscopy is a proposed one, which may work effectively when compared to other antennas in the capsule.

  12. Rapid cooled lens cell

    Science.gov (United States)

    Stubbs, David M.; Hsu, Ike C.

    1991-12-01

    This paper describes the optomechanical design, thermal analysis, fabrication, and test evaluation processes followed in developing a rapid cooled, infrared lens cell. Thermal analysis was the key engineering discipline exercised in the design phase. The effect of thermal stress on the lens, induced by rapid cooling of the lens cell, was investigated. Features of this lens cell that minimized the thermal stress will be discussed in a dedicated section. The results of thermal analysis on the selected lens cell design and the selection of the flow channel design in the heat exchanger will be discussed. Throughout the paper engineering drawings, illustrations, analytical results, and photographs of actual hardware are presented.

  13. Fabrication of hybrid graphene oxide/polyelectrolyte capsules by means of layer-by-layer assembly on erythrocyte cell templates.

    Science.gov (United States)

    Irigoyen, Joseba; Politakos, Nikolaos; Diamanti, Eleftheria; Rojas, Elena; Marradi, Marco; Ledezma, Raquel; Arizmendi, Layza; Rodríguez, J Alberto; Ziolo, Ronald F; Moya, Sergio E

    2015-01-01

    A novel and facile method was developed to produce hybrid graphene oxide (GO)-polyelectrolyte (PE) capsules using erythrocyte cells as templates. The capsules are easily produced through the layer-by-layer technique using alternating polyelectrolyte layers and GO sheets. The amount of GO and therefore its coverage in the resulting capsules can be tuned by adjusting the concentration of the GO dispersion during the assembly. The capsules retain the approximate shape and size of the erythrocyte template after the latter is totally removed by oxidation with NaOCl in water. The PE/GO capsules maintain their integrity and can be placed or located on other surfaces such as in a device. When the capsules are dried in air, they collapse to form a film that is approximately twice the thickness of the capsule membrane. AFM images in the present study suggest a film thickness of approx. 30 nm for the capsules in the collapsed state implying a thickness of approx. 15 nm for the layers in the collapsed capsule membrane. The polyelectrolytes used in the present study were polyallylamine hydrochloride (PAH) and polystyrenesulfonate sodium salt (PSS). Capsules where characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic light scattering (DLS) and Raman microscopy, the constituent layers by zeta potential and GO by TEM, XRD, and Raman and FTIR spectroscopies.

  14. Fabrication of hybrid graphene oxide/polyelectrolyte capsules by means of layer-by-layer assembly on erythrocyte cell templates

    Directory of Open Access Journals (Sweden)

    Joseba Irigoyen

    2015-12-01

    Full Text Available A novel and facile method was developed to produce hybrid graphene oxide (GO–polyelectrolyte (PE capsules using erythrocyte cells as templates. The capsules are easily produced through the layer-by-layer technique using alternating polyelectrolyte layers and GO sheets. The amount of GO and therefore its coverage in the resulting capsules can be tuned by adjusting the concentration of the GO dispersion during the assembly. The capsules retain the approximate shape and size of the erythrocyte template after the latter is totally removed by oxidation with NaOCl in water. The PE/GO capsules maintain their integrity and can be placed or located on other surfaces such as in a device. When the capsules are dried in air, they collapse to form a film that is approximately twice the thickness of the capsule membrane. AFM images in the present study suggest a film thickness of approx. 30 nm for the capsules in the collapsed state implying a thickness of approx. 15 nm for the layers in the collapsed capsule membrane. The polyelectrolytes used in the present study were polyallylamine hydrochloride (PAH and polystyrenesulfonate sodium salt (PSS. Capsules where characterized by transmission electron microscopy (TEM, atomic force microscopy (AFM, dynamic light scattering (DLS and Raman microscopy, the constituent layers by zeta potential and GO by TEM, XRD, and Raman and FTIR spectroscopies.

  15. Capsule Ablator Inflight Performance Measurements Via Streaked Radiography Of ICF Implosions On The NIF*

    Science.gov (United States)

    Dewald, E. L.; Tommasini, R.; Mackinnon, A.; MacPhee, A.; Meezan, N.; Olson, R.; Hicks, D.; LePape, S.; Izumi, N.; Fournier, K.; Barrios, M. A.; Ross, S.; Pak, A.; Döppner, T.; Kalantar, D.; Opachich, K.; Rygg, R.; Bradley, D.; Bell, P.; Hamza, A.; Dzenitis, B.; Landen, O. L.; MacGowan, B.; LaFortune, K.; Widmayer, C.; Van Wonterghem, B.; Kilkenny, J.; Edwards, M. J.; Atherton, J.; Moses, E. I.

    2016-03-01

    Streaked 1-dimensional (slit imaging) radiography of 1.1 mm radius capsules in ignition hohlraums was recently introduced on the National Ignition Facility (NIF) and gives an inflight continuous record of capsule ablator implosion velocities, shell thickness and remaining mass in the last 3-5 ns before peak implosion time. The high quality data delivers good accuracy in implosion metrics that meets our requirements for ignition and agrees with recently introduced 2-dimensional pinhole radiography. Calculations match measured trajectory across various capsule designs and laser drives when the peak laser power is reduced by 20%. Furthermore, calculations matching measured trajectories give also good agreement in ablator shell thickness and remaining mass.

  16. Technology needs for the development of the accommodative intraocular lens

    Science.gov (United States)

    Nishi, Okihiro

    2010-02-01

    Refilling the lens capsule while preserving capsular integrity offers the potential to restore ocular accommodation. There are two persisting problems in capsular bag refilling for possible clinical application: Leakage of the injectable material through the capsular opening and capsular opacification. Numerous attempts for solving these cardinal problems have not been proven to be clinically applicable. Recently, we developed a novel capsular bag refilling procedure using a novel accommodative intraocular lens that serves as an optic as well as a plug for sealing the capsular opening. The procedure and the results of monkey experiments will be presented.

  17. Optimal Design of Capsule Transporting Pipeline carrying Spherical Capsules

    Science.gov (United States)

    Asim, Taimoor; Mishra, Rakesh; Ubbi, Kuldip

    2012-05-01

    A capsule pipeline transports material or cargo in capsules propelled by fluid flowing through a pipeline. The cargo may either be contained in capsules (such as wheat enclosed inside sealed cylindrical containers), or may itself be the capsules (such as coal compressed into the shape of a cylinder or sphere). As the concept of capsule transportation is relatively new, the capsule pipelines need to be designed optimally for commercial viability. An optimal design of such a pipeline would have minimum pressure drop due to the presence of the solid medium in the pipeline, which corresponds to minimum head loss and hence minimum pumping power required to drive the capsules and the transporting fluid. The total cost for the manufacturing and maintenance of such pipelines is yet another important variable that needs to be considered for the widespread commercial acceptance of capsule transporting pipelines. To address this, the optimisation technique presented here is based on the least-cost principle. Pressure drop relationships have been incorporated to calculate the pumping requirements for the system. The maintenance and manufacturing costs have been computed separately to analyse their effects on the optimisation process. A design example has been included to show the usage of the model presented. The results indicate that for a specific throughput, there exists an optimum diameter of the pipeline for which the total cost for the piping system is at its minimum.

  18. Flavin nucleotides in human lens: regional distribution in brunescent cataracts.

    Science.gov (United States)

    Bhat, K S; Nayak, S

    1998-12-01

    The biochemical mechanism(s) underlying brunescent cataracts remain unclear. Oxidative stress due to reactive oxygen species may have a role in the pigmentation process in eye lens. We have analysed human cataractous lenses for flavins by high-performance liquid chromatography (HPLC), since flavins are light sensitive and act as endogenous sensitizers generating reactive oxygen species in the eye. The most significant observation in this study is that higher levels of flavin nucleotides occur in brown lens compared to yellow lens. The concentration of flavin nucleotides (flavin monouncleotide, FMN + flavin adenine dinucleotide, FAD) was highest in the nuclear region of the lens followed by the cortical and capsule-epithelial regions. However, the ratio of FAD/FMN was lowest in the nuclear region of the lens followed by other regions. On the other hand, riboflavin was not detected in any of the lens (cataractous) regions. These results suggest that the observed increase in flavin nucleotides in the ocular tissue could contribute towards deepening of lens pigmentation.

  19. Magnetism in metal-organic capsules

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, Jerry L.; Brechin, Euan K; Dalgarno, Scott J.; Inglis, Ross; Jones, Leigh F.; Mossine, Andrew; Paterson, Martin J.; Power, Nicholas P.; Teat, Simon J.

    2010-01-07

    Nickel and cobalt seamed metal-organic capsules have been isolated and studied using structural, magnetic and computational approaches. Antiferromagnetic exchange in the Ni capsule results from coordination environments enforced by the capsule framework.

  20. Magnetism in metal-organic capsules

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, Jerry L.; Brechin, Euan K; Dalgarno, Scott J.; Inglis, Ross; Jones, Leigh F.; Mossine, Andrew; Paterson, Martin J.; Power, Nicholas P.; Teat, Simon J.

    2010-01-07

    Nickel and cobalt seamed metal-organic capsules have been isolated and studied using structural, magnetic and computational approaches. Antiferromagnetic exchange in the Ni capsule results from coordination environments enforced by the capsule framework.

  1. At a watershed? Technical developments in wireless capsule endoscopy.

    Science.gov (United States)

    Swain, Paul

    2010-10-01

    This article reviews some of the technical developments that allowed the introduction of the wireless capsule 10 years ago into human usage. Technical advances and commercial competition have substantially improved the performance of clinical capsule endoscopy, especially in optical quality. Optical issues including the airless environment, depth of focus, dome reflection, the development of white light light-emitting diodes, exposure length and the advent of adaptive illumination are discussed. The competition between charge coupled devices and complementary metal oxide silicone technologies for imaging, lens improvements and the requirements for different frame rates and their associated power management strategies and battery type choices and the introduction of field enhancement methods into commercial capsule technology are considered. Capsule technology stands at a watershed. It is mainly confined to diagnostic small intestinal imaging. It might overtake other forms of conventional diagnostic endoscopy, especially colonoscopy but also gastroscopy and esophagoscopy but has to improve both technically and compete in price. It might break out of its optical diagnostic confinement and become a therapeutic modality. To make this leap there have to be several technical advances especially in biopsy, command, micromechanical internal movements, remote controlled manipulation and changes in power management, which may include external power transmission.

  2. Effects of process variables on the encapsulation of oil in ca-alginate capsules using an inverse gelation technique.

    Science.gov (United States)

    Abang, Sariah; Chan, Eng-Seng; Poncelet, Denis

    2012-01-01

    The objective of this study was to investigate the effects of process variables on the encapsulation of oil in a calcium alginate membrane using an inverse gelation technique. A dispersion of calcium chloride solution in sunflower oil (water-in-oil emulsion) was added dropwise to the alginate solution. The migration of calcium ions to the alginate solution initiates the formation of a ca-alginate membrane around the emulsion droplets. The membrane thickness of wet capsules and the elastic modulus of dry capsules increased following first-order kinetics with an increasing curing time. An increase in the calcium chloride concentration increased the membrane thickness of wet capsules and the elastic modulus of dry capsules. An increase in the alginate concentration decreased the mean diameter of wet capsules but increased the elastic modulus of dry capsules.

  3. Anterior lens epithelium in cataract patients with retinitis pigmentosa - scanning and transmission electron microscopy study.

    Science.gov (United States)

    Andjelic, Sofija; Drašlar, Kazimir; Hvala, Anastazija; Hawlina, Marko

    2017-05-01

    In retinitis pigmentosa (RP) patients, relatively minor lens opacity in central part of posterior pole of the lens may cause disproportionate functional symptoms requiring cataract operation. To investigate the possible structural reasons for this opacity development, we studied the structure of the lens epithelium of patients with RP. The anterior lens capsule (aLC: basement membrane and associated lens epithelial cells, LECs) was obtained from cataract surgery and prepared for scanning and transmission electron microscopy (SEM and TEM). Both SEM and TEM show a number of abnormal features in the anterior lens epithelium of cataract patients with RP. The abnormalities appear mainly as holes, thinning and degradation of the epithelium, with the dimensions from <1 μm to more than 50 μm. Other types of holes in size up to 20 μm were seen that may be formed by gradual stretching of the lens epithelium. Another type of abnormalities was cracks that were seen between adjacent LECs, with dimensions 0.1-2 μm × up to 10 μm. Abnormal structural features were observed in the anterior lens epithelium that may cause water influx into the lens. This may lead to clouding along the water clefts leading towards the posterior pole in the RP cataractous lens. We suggest that the lens epithelium has a role in the development of the cataract in patients with RP. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  4. Comparison of Anterior Capsule Stability Following Implantation of Three Single Piece Acrylic Intraocular Lenses with Different Haptic Design.

    Science.gov (United States)

    Yang, Soonwon; Lim, Sung A; Na, Kyung-Sun; Joo, Choun-Ki

    2017-02-01

    To compare the anterior capsule contraction and intraocular lens (IOL) decentration among three types of IOL to determine the influence of haptic design on anterior capsule stability. One hundred fifty patients were enrolled in this prospective, randomized study and 260 eyes underwent implantation of one of the following IOLs: modified L-haptic IOL (n = 74), modified C-haptic IOL (n = 97), or a plate-haptic IOL (n = 89). The area of the anterior capsule opening, IOL decentration, and capsule overlap were measured using retroillumination photospot 1 day and 2 months after cataract surgery. The area of capsule opening at postoperative day 1 was significantly different between the three IOLs (p haptic IOL (p haptic IOLs were less than those in modified C-haptic IOLs and comparable to those in plate-haptic IOLs.

  5. Contact lens in keratoconus

    OpenAIRE

    Varsha M Rathi; Preeji S Mandathara; Srikanth Dumpati

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the En...

  6. Wzy-dependent bacterial capsules as potential drug targets.

    Science.gov (United States)

    Ericsson, Daniel J; Standish, Alistair; Kobe, Bostjan; Morona, Renato

    2012-10-01

    The bacterial capsule is a recognized virulence factor in pathogenic bacteria. It likely works as an antiphagocytic barrier by minimizing complement deposition on the bacterial surface. With the continual rise of bacterial pathogens resistant to multiple antibiotics, there is an increasing need for novel drugs. In the Wzy-dependent pathway, the biosynthesis of capsular polysaccharide (CPS) is regulated by a phosphoregulatory system, whose main components consist of bacterial-tyrosine kinases (BY-kinases) and their cognate phosphatases. The ability to regulate capsule biosynthesis has been shown to be vital for pathogenicity, because different stages of infection require a shift in capsule thickness, making the phosphoregulatory proteins suitable as drug targets. Here, we review the role of regulatory proteins focusing on Streptococcus pneumoniae, Staphylococcus aureus, and Escherichia coli and discuss their suitability as targets in structure-based drug design.

  7. Iatrogenic Lens Injuries

    Directory of Open Access Journals (Sweden)

    Ümit Kamış

    2012-12-01

    Full Text Available During intraocular surgery, undesired damages of various etiology may occur in adjacent tissues. One of these tissues is the crystalline lens, which may be traumatized both in anterior segment and posterior segment surgeries, and when damaged, it usually causes marked decrease in visual acuity. The leading causes of iatrogenic lens injuries are intravitreal injection, laser iridotomy, phakic intraocular lens implantation, anterior chamber paracentesis, and vitreoretinal surgery. When crystalline lens damage occurs, its negative effect on visual function may be eliminated by performing cataract surgery intraoperatively or in elective conditions. (Turk J Ophthalmol 2012; 42: Supplement 27-30

  8. 长期配戴角膜接触镜角膜中央厚度的变化%Changes in central corneal thickness in long term contact lens wear

    Institute of Scientific and Technical Information of China (English)

    叶翠玉; 沙翔垠; 姚达强; 李明瑶; 丁宇虹; 刘咏仪

    2006-01-01

    目的探讨长期持续配戴软性角膜接触镜者和长期配戴硬性透氧性接触镜(rigid gaspermeable contact lens,RGP)者与无角膜接触镜配戴史者中央角膜厚度的差异.方法应用超声角膜测厚仪检测无角膜接触镜配戴史者500例(918眼)、长期持续配戴软性角膜接触镜2年以上200例(386眼)和长期配戴RGP≥1年者100例(195眼)的中央角膜厚度.结果无角膜接触镜配戴史者,平均角膜中央厚度为(528.59士23.37)μm,长期持续配戴软性角膜接触镜者平均中央角膜厚度为(512.31±21.73)μm,配戴RGP者平均中央角膜厚度为(515.03±22.97)μm.配戴软性角膜接触镜者与正常者比较,差异有显著性(P<0.05).配戴RGP者与正常者比较,差异有显著性(P<0.05),配戴软性角膜接触镜者与RGP者比较,差异无显著性(P>0.05).结论长期持续配戴软性角膜接触镜者和RGP者平均中央角膜厚度均薄于无角膜接触镜配戴者.

  9. Novel fabrication technique of hybrid structure lens array for 3D images

    Science.gov (United States)

    Lee, Junsik; Kim, Junoh; Kim, Cheoljoong; Shin, Dooseub; Koo, Gyohyun; Won, Yong Hyub

    2016-03-01

    Tunable liquid lens arrays can produce three dimensional images by using electrowetting principle that alters surface tensions by applying voltage. This method has advantages of fast response time and low power consumption. However, it is challenging to fabricate a high fill factor liquid lens array and operate three dimensional images which demand high diopter. This study describes a hybrid structure lens array which has not only a liquid lens array but a solid lens array. A concave-shape lens array is unavoidable when using only the liquid lens array and some voltages are needed to make the lens flat. By placing the solid lens array on the liquid lens array, initial diopter can be positive. To fabricate the hybrid structure lens array, a conventional lithographic process in semiconductor manufacturing is needed. A negative photoresist SU-8 was used as chamber master molds. PDMS and UV adhesive replica molding are done sequentially. Two immiscible liquids, DI water and dodecane, are injected in the fabricated chamber, followed by sealing. The fabricated structure has a 20 by 20 pattern of cylindrical shaped circle array and the aperture size of each lens is 1mm. The thickness of the overall hybrid structure is about 2.8mm. Hybrid structure lens array has many advantages. Solid lens array has almost 100% fill factor and allow high efficiency. Diopter can be increased by more than 200 and negative diopter can be shifted to the positive region. This experiment showed several properties of the hybrid structure and demonstrated its superiority.

  10. Foldable Lens Explantation and Exchange:The Reason and Solution

    Institute of Scientific and Technical Information of China (English)

    Danying Zheng; Zhenpin Zhang; Wenhui Yang; Weirong Chen

    2001-01-01

    Objective: To report the explantation and exchange of Hydrophilic Acrylic foldable intraocular lens (IOL) on 14 patients who had visual disturbances caused by the change of transparence on optic. Methods: Sixteen Hydrophilic Acrylic foldable intraocular lenses from 14 patients who presented with decreased visual acuity from 6 months to 1 year after normal phacoemulsification and IOL implantation associated with extensive transparent change on optic of the lens. The lenses were explanted with the bisection technique. All the eyes were reinserted with Acrysof foldable lenses. Results: Sixteen lenses were removed successfully and exchanged with the new lens in the capsule. The posterior capsular rupture and vitreous loss were found in the first two cases. One of them had the zonulysis due to the radial tear of the anterior capsule during the enlargement of the capsular opening. The anterior vitrectomy was performed with IOL fixed on the ciliary sulcus. The visual acuity of all the patients improved obviously without posterior complication. Conclusion: Foldable lens explantation with the bisection technique and exchange had a successful outcome with improvement of ocular condition. Eye science 2001; 17:54 ~56.

  11. Influence of capsule shell composition on the performance indicators of hypromellose capsule in comparison to hard gelatin capsules.

    Science.gov (United States)

    Al-Tabakha, Moawia M; Arida, Adi Issam; Fahelelbom, Khairi M S; Sadek, Bassem; Saeed, Dima Ahmed; Abu Jarad, Rami A; Jawadi, Jeevani

    2015-01-01

    The purpose of this study was to assess the in vitro performances of "vegetable" capsules in comparison to hard gelatin capsules in terms of shell weight variation, reaction to different humidity conditions, resistance to stress in the absence of moisture, powder leakage, disintegration and dissolution. Two types of capsules made of HPMC produced with (Capsule 2) or without (Capsule 3) a gelling agent and hard gelatin capsules (Capsule 1) were assessed. Shell weight variability was relatively low for all tested capsules shells. Although Capsule 1 had the highest moisture content under different humidity conditions, all capsule types were unable to protect the encapsulated hygroscopic polyvinylpyrrolidone (PVP) powder from surrounding humidity. The initial disintegration for all Capsule 1 occurred within 3 min, but for other types of capsules within 6 min (n = 18). Dissolution of acetaminophen was better when the deionized water (DIW) temperature increased from 32 to 42 °C in case of Capsule 1, but the effect of temperature was not significant for the other types of capsules. Acetaminphen dissolution from Capsule 1 was the fastest (i.e. >90% in 10 min) and independent of the media pH or contents unlike Capsule 2 which was influenced by the pH and dissolution medium contents. It is feasible to use hypromellose capsules shells with or without gelling agent for new lines of pharmaceutical products, however, there is a window for capsule shells manufacturing companies to improve the dissolution of their hypromellose capsules to match the conventional gelatin capsule shells and eventually replace them.

  12. Lens siderosis resulting from a small intralenticular metallic foreign body

    Directory of Open Access Journals (Sweden)

    Shah, Mehul A.

    2015-11-01

    Full Text Available We report a rare case of lens siderosis with an undetectable intraocular foreign body by imaging. An 8-year-old boy presented with diminution of vision in the left eye since 3 months. His parents gave a preceding uncertain history of a foreign body injury to his left eye 3 months ago while playing. Presenting visual acuity in the left eye was perception of hand movements. Slit-lamp examination revealed a total white cataract with brownish-pigmented spots on the anterior capsule of the lens, but no intraocular foreign body was found. There was also no evidence of an intraocular foreign body on ultrasonography. Patient underwent cataract extraction with intraocular lens implantation. During the operation, a small (2×1×1 mm in size intralenticular foreign body of metal material was found and removed carefully with a magnet. The patient regained 20/30 vision after surgery.

  13. Eye lens crystallins: a component of intraocular pseudoexfoliative material.

    Science.gov (United States)

    Veromann, Siiri; Sünter, Alar; Juronen, Erkki; Tasa, Gunnar; Panov, Aleksei

    2004-01-01

    Feeding experimental animals (19 pigs) with surplus sucrose and salt (NaCl) caused cataractous changes in lens tissue and triggered the formation of pseudoexfoliative material on the lens capsule. In the control animals (15 pigs) pseudoexfoliative material was absent. The avidin-biotin complex immunohistochemical method was applied to the pseudoexfoliative material obtained from 15 porcine experimental precataractous lenses and 1 spontaneously cataractous eye and revealed crystallins as a component of the intraocular pseudoexfoliative material. To prevent the development of both intraocular pseudoexfoliative material and crystallin-dependent glaucomatous changes in the trabecular meshwork of the eye, it is important to avoid any cataractogenic insult, including surplus sucrose and salt consumption, causing crystallin leakage from the lens. Copyright 2004 S. Karger AG, Basel

  14. Solution Based Deposition of Polyimide Ablators for NIF Capsules

    Energy Technology Data Exchange (ETDEWEB)

    Cook, R

    2002-07-11

    Between June 1997 and March 2002 Luxel Corporation was contracted to explore the possibility of preparing NIF scale capsules with polyimide ablators using solution-based techniques. This work offered a potential alternative to a vapor deposition approach talking place at LLNL. The motivation for pursuing the solution-based approach was primarily two-fold. First, it was expected that much higher strength capsules (relative to vapor deposition) could be prepared since the solution precursors were known to produce high strength films. Second, in applying the ablator as a fluid it was expected that surface tension effects would lead to very smooth surfaces. These potential advantages were offset by expected difficulties, primary among them that the capsules would need to be levitated in some fashion (for example acoustically) during coating and processing, and that application of the coating uniformly to thicknesses of 150 pm on levitated capsules would be difficult. Because of the expected problems with the coupling of levitation and coating, most of the initial effort was to develop coating and processing techniques on stalk-mounted capsules. The program had some success. Using atomizer spray techniques in which application of {approx}5 {micro}m fluid coatings were alternated with heating to remove solvent resulted in up to 70 {micro}m thick coatings that were reasonably smooth at short wavelengths, and showed only about a 1 {micro}m thickness variation over long wavelengths. More controlled deposition with an inkjet devise was also developed. However difficult technical problems remained, and these problems coupled with the relative success of the vapor deposition approach led to the termination of the solution-based work in 2002. What follows is a compilation of the progress reports submitted by Luxel for this work which spanned a number of separate contracts. The reports are arranged chronologically, the last report in the collection has a modest summary of what

  15. Fibrosis in the lens. Sprouty regulation of TGFβ-signaling prevents lens EMT leading to cataract.

    Science.gov (United States)

    Lovicu, F J; Shin, E H; McAvoy, J W

    2016-01-01

    Cataract is a common age-related condition that is caused by progressive clouding of the normally clear lens. Cataract can be effectively treated by surgery; however, like any surgery, there can be complications and the development of a secondary cataract, known as posterior capsule opacification (PCO), is the most common. PCO is caused by aberrant growth of lens epithelial cells that are left behind in the capsular bag after surgical removal of the fiber mass. An epithelial-to-mesenchymal transition (EMT) is central to fibrotic PCO and forms of fibrotic cataract, including anterior/posterior polar cataracts. Transforming growth factor β (TGFβ) has been shown to induce lens EMT and consequently research has focused on identifying ways of blocking its action. Intriguingly, recent studies in animal models have shown that EMT and cataract developed when a class of negative-feedback regulators, Sprouty (Spry)1 and Spry2, were conditionally deleted from the lens. Members of the Spry family act as general antagonists of the receptor tyrosine kinase (RTK)-mediated MAPK signaling pathway that is involved in many physiological and developmental processes. As the ERK/MAPK signaling pathway is a well established target of Spry proteins, and overexpression of Spry can block aberrant TGFβ-Smad signaling responsible for EMT and anterior subcapsular cataract, this indicates a role for the ERK/MAPK pathway in TGFβ-induced EMT. Given this and other supporting evidence, a case is made for focusing on RTK antagonists, such as Spry, for cataract prevention. In addition, and looking to the future, this review also looks at possibilities for supplanting EMT with normal fiber differentiation and thereby promoting lens regenerative processes after cataract surgery. Whilst it is now known that the epithelial to fiber differentiation process is driven by FGF, little is known about factors that coordinate the precise assembly of fibers into a functional lens. However, recent research

  16. Squeezing through: capsule or bubble?

    CERN Document Server

    Dawson, Geoffrey

    2013-01-01

    In this fluid dynamics video, we compare the deformation of two flexible particles as they propagate through a sudden constriction of a liquid filled channel under constant-flux flow: a gas bubble, and a capsule formed by encapsulating a liquid droplet in a cross-linked polymeric membrane. Both bubble and capsule adopt highly contorted configurations as they squeeze through the constriction, exhibit broadly similar features over a wide range of flow rates, and rupture for sufficiently high flow rates. However, at flow rates prior to rupture, certain features of the deformation allow bubble and capsule to be distinguished: bubbles exhibit a tip-streaming singularity associated with critical thinning of the rear of the bubble, while the capsule membrane wrinkles under large compressive stresses induced by the constriction.

  17. Ignition capsules with aerogel-supported liquid DT fuel for the National Ignition Facility

    Directory of Open Access Journals (Sweden)

    Ho D.D.-M.

    2013-11-01

    Full Text Available For high repetition-rate fusion power plant applications, capsules with aerogel-supported liquid DT fuel can have much reduced fill time compared to β-layering a solid DT fuel layer. The melting point of liquid DT can be lowered once liquid DT is embedded in an aerogel matrix, and the DT vapor density is consequently closer to the desired density for optimal capsule design requirement. We present design for NIF-scale aerogel-filled capsules based on 1-D and 2-D simulations. An optimal configuration is obtained when the outer radius is increased until the clean fuel fraction is within 65 – 75% at peak velocity. A scan (in ablator and fuel thickness parameter space is used to optimize the capsule configurations. The optimized aerogel-filled capsule has good low-mode robustness and acceptable high-mode mix.

  18. Superlensing Microscope Objective Lens

    CERN Document Server

    Yan, Bing; Parker, Alan; Lai, Yukun; Thomas, John; Yue, Liyang; Monks, James

    2016-01-01

    Conventional microscope objective lenses are diffraction limited, which means that they cannot resolve features smaller than half the illumination wavelength. Under white light illumination, such resolution limit is about 250-300 nm for an ordinary microscope. In this paper, we demonstrate a new superlensing objective lens which has a resolution of about 100 nm, offering at least two times resolution improvement over conventional objectives in resolution. This is achieved by integrating a conventional microscope objective lens with a superlensing microsphere lens using a 3D printed lens adaptor. The new objective lens was used for label-free super-resolution imaging of 100 nm-sized engineering and biological samples, including a Blu-ray disc sample, semiconductor chip and adenoviruses. Our work creates a solid base for developing a commercially-viable superlens prototype, which has potential to transform the field of optical microscopy and imaging.

  19. The conformity of a soft contact lens on the eye.

    Science.gov (United States)

    Funkenbusch, G M; Benson, R C

    1996-08-01

    An axisymmetric elastic shell deformation model has been created to predict the conformity of a soft contact lens when pressed against the eye. Regions of contact and gap may be predicted, and the nonuniform reaction pressure between the lens and eye may also be found. This is important for issues like abrasion and comfort. Bending, membrane and transverse shear loads within the lens are also computed. Commercial soft contact lenses and a representative eye shape are used for the examples. We find that the uniformity of loading against the eye is strongly affected by the degree to which the lens is shaped to fit the eye, and relatively unaffected by the thickness of the lens.

  20. Facile and Scalable Synthesis of Monodispersed Spherical Capsules with a Mesoporous Shell

    KAUST Repository

    Qi, Genggeng

    2010-05-11

    Monodispersed HMSs with tunable particle size and shell thickness were successfully synthesized using relatively concentrated polystyrene latex templates and a silica precursor in a weakly basic ethanol/water mixture. The particle size of the capsules can vary from 100 nm to micrometers. These highly engineered monodispersed capsules synthesized by a facile and scalable process may find applications in drug delivery, catalysis, separationm or as biological and chemical microreactors. © 2010 American Chemical Society.

  1. The development and application of wireless capsule endoscopy.

    Science.gov (United States)

    Glukhovsky, A; Jacob, H

    2004-06-01

    The introduction of the Video Capsule Endoscope (VCE) by Given Imaging Ltd. (Yoqneam, Israel) in 2001, and its subsequent approval by the FDA as a first line tool in the detection of abnormalities of the small bowel, is indicative of the rapid acceptance of capsule endoscopy by the practicing gastroenterological community. An extensive clinical trials program consistently revealed a high diagnostic yield of the VCE when compared to other diagnostic modalities of the small intestine. The capsule endoscope contains a miniature color video camera, illumination sources, lens, transmitter/controller, antenna, and a power source. It is small enough to easily swallow (11 x 26 mm), and it is propelled through the gastrointestinal (GI) tract by peristalsis. Its development was enabled by a series of technological breakthroughs that occurred at the close of the 20th century. The VCE is one of the most exciting examples of the recent trend for minimally invasive autonomous medical tools in diagnostic, monitoring, and therapeutic applications. Expanding applications of the VCE to additional parts of the GI tract, adding physiological sensors, and--in the more remote future--addition of therapeutic capabilities will likely occur as this new branch of endoscopy develops.

  2. Capsular Outcomes After Pediatric Cataract Surgery Without Intraocular Lens Implantation

    Science.gov (United States)

    Tan, Xuhua; Lin, Haotian; Lin, Zhuoling; Chen, Jingjing; Tang, Xiangchen; Luo, Lixia; Chen, Weirong; Liu, Yizhi

    2016-01-01

    Abstract The objective of this study was to investigate capsular outcomes 12 months after pediatric cataract surgery without intraocular lens implantation via qualitative classification and quantitative measurement. This study is a cross-sectional study that was approved by the institutional review board of Zhongshan Ophthalmic Center of Sun Yat-sen University in Guangzhou, China. Digital coaxial retro-illumination photographs of 329 aphakic pediatric eyes were obtained 12 months after pediatric cataract surgery without intraocular lens implantation. Capsule digital coaxial retro-illumination photographs were divided as follows: anterior capsule opening area (ACOA), posterior capsule opening area (PCOA), and posterior capsule opening opacity (PCOO). Capsular outcomes were qualitatively classified into 3 types based on the PCOO: Type I—capsule with mild opacification but no invasion into the capsule opening; Type II—capsule with moderate opacification accompanied by contraction of the ACOA and invasion to the occluding part of the PCOA; and Type III—capsule with severe opacification accompanied by total occlusion of the PCOA. Software was developed to quantitatively measure the ACOA, PCOA, and PCOO using standardized DCRPs. The relationships between the accurate intraoperative anterior and posterior capsulorhexis sizes and the qualitative capsular types were statistically analyzed. The DCRPs of 315 aphakic eyes (95.8%) of 191 children were included. Capsular outcomes were classified into 3 types: Type I—120 eyes (38.1%); Type II—157 eyes (49.8%); Type III—38 eyes (12.1%). The scores of the capsular outcomes were negatively correlated with intraoperative anterior capsulorhexis size (R = −0.572, P < 0.001), but no significant correlation with intraoperative posterior capsulorhexis size (R = −0.16, P = 0.122) was observed. The ACOA significantly decreased from Type I to Type II to Type III, the PCOA increased in size from Type I to Type

  3. Unitary lens semiconductor device

    Science.gov (United States)

    Lear, Kevin L.

    1997-01-01

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  4. The capsule's contribution to total hip construct stability--a finite element analysis.

    Science.gov (United States)

    Elkins, Jacob M; Stroud, Nicholas J; Rudert, M James; Tochigi, Yuki; Pedersen, Douglas R; Ellis, Benjamin J; Callaghan, John J; Weiss, Jeffrey A; Brown, Thomas D

    2011-11-01

    Instability is a significant concern in total hip arthroplasty (THA), particularly when there is structural compromise of the capsule due to pre-existing pathology or due to necessities of surgical approach. An experimentally grounded fiber-direction-based finite element model of the hip capsule was developed, and was integrated with an established three-dimensional model of impingement/dislocation. Model validity was established by close similarity to results from a cadaveric experiment in a servohydraulic hip simulator. Parametric computational runs explored effects of graded levels of capsule thickness, of regional detachment from the capsule's femoral or acetabular insertions, of surgical incisions of capsule substance, and of capsule defect repairs. Depending strongly upon the specific site, localized capsule defects caused varying degrees of construct stability compromise, with several specific situations involving over 60% decrement in dislocation resistance. Construct stability was returned substantially toward intact-capsule levels following well-conceived repairs, although the suture sites involved were often at substantial risk of failure. These parametric model results underscore the importance of retaining or robustly repairing capsular structures in THA, in order to maximize overall construct stability. 

  5. Summary Report for Capsule Dry Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    JOSEPHSON, W S

    2003-09-04

    There are 1.936 cesium (Cs) and strontium (Sr) capsules stored in pools at the Waste Encapsulation and Storage Facility (WESF). These capsules will be moved to dry storage on the Hanford Site as an interim measure to reduce risk. The Cs/Sr Capsule Dry Storage Project (CDSP) is conducted under the assumption the capsules will eventually be moved to the repository at Yucca Mountain, and the design criteria include requirements that will facilitate acceptance at the repository. The storage system must also permit retrieval of capsules in the event vitrification of the capsule contents is pursued. A cut away drawing of a typical cesium chloride (CsCI) capsule and the capsule property and geometry information are provided in Figure 1.1. Strontium fluoride (SrF{sub 2}) capsules are similar in design to CsCl capsules. Further details of capsule design, current state, and reference information are given later in this report and its references. Capsule production and life history is covered in WMP-16938, Capsule Characterization Report for Capsule Dry Storage Project, and is briefly summarized in Section 5.2 of this report.

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent Oct ... easy answer, and neither one considers long-term impacts. Phakic Intraocular Lenses for Nearsightedness FEB 27, 2017 ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lenses without a prescription in the United States. All contact lenses are medical devices that require a ... no such thing as a "one size fits all" contact lens. Lenses that are not properly fitted ...

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her with a corneal abrasion. ... Studies Look at Effects of Marijuana on Vision FEB ...

  9. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her ...

  10. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at ... ask for a prescription. There is no such thing as a "one size fits all" contact lens. ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals ...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... 2016 More Eye Health News Studies Look at Effects of Marijuana on Vision FEB 28, 2017 By ...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... Worse? May 16, 2016 More Eye Health News New Dry Eye Treatment is a Tear-Jerker JUL ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... glow-in-the-dark lizard lenses, costume contacts can certainly add a spooky, eye-popping touch. But ... consideration as a standard contact lens because they can be purchased over-the-counter or on the ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Healthy Contact Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 ... Number: * Email: * Enter code: * Message: Thank you Your feedback has been sent.

  19. Capsule endoscopy of the esophagus.

    Science.gov (United States)

    Waterman, Matti; Gralnek, Ian M

    2009-08-01

    Video capsule endoscopy has acquired wide clinical acceptance since its the US Food and Drug Administration approval in 2001. Recently, the technology of video capsule endoscopy has been adapted to other organs in the gastrointestinal tract, including the esophagus and colon. In this review, we discuss esophageal capsule endoscopy (ECE)-the procedure, its indications, contraindications, safety, and future applications. ECE is a minimally invasive procedure that uses special video capsules with ability to acquire images from 2 cameras with high image storing speed of 14 to 18 frames per second. A special ingestion procedure allows for prolonged esophageal transit time and an optimized view of the gastroesophageal junction. ECE has been shown to have moderately high sensitivity and accuracy in the diagnosis and surveillance of Barrett esophagus in patients with gastroesophageal reflux disease but has not demonstrated superiority to esogastroduodenoscopy in cost-effectiveness models. In patients with portal hypertension, ECE has a sensitivity of 63% to 100% for screening of esophageal varices, but does not seem to be superior to esogastroduodenoscopy in its cost-effectiveness. No serious complications have been reported after ECE although a low rate of esophageal capsule retention (0.7% to 2.2%) has been reported, usually because of unsuspected esophageal strictures. Contraindications to capsule endoscopy include known or suspected gastrointestinal and esophageal obstruction, strictures, or fistulas, intestinal pseudoobstruction, and children under 10 years of age. It is expected that improvements in imaging technology will improve the accuracy of ECE with the development of immunological-based and chemical-based diagnostic capabilities.

  20. Intraocular Lens Calcification; a Clinicopathologic Report

    Directory of Open Access Journals (Sweden)

    Mozhgan Rezaei-Kanavi

    2009-04-01

    Full Text Available

    PURPOSE: To describe the clinical and pathological features of a case of hydrogel intraocular lens (IOL calcification. CASE REPORT: A 48-year-old man underwent explantation of a single-piece hydrophilic acrylic intraocular lens in his left eye because of decreased visual acuity and milky white opalescence of the IOL. The opacified lens was exchanged uneventfully with a hydrophobic acrylic IOL. Gross examination of the explanted IOL disclosed opacification of the optic and haptics. Full-thickness sections of the lens optic were stained with hematoxylin and eosin (H&E, von Kossa and Gram Tworts'. Microscopic examination of the sections revealed fine and diffuse basophilic granular deposits of variable size within the lens optic parallel to the lens curvature but separated from the surface by a moderately clear zone. The deposits were of high calcium content as evident by dark brown staining with von Kossa. Gram Tworts' staining disclosed no microorganisms. CONCLUSION: This report further contributes to the existing literature on hydrogel IOL calcification.

  1. Triggered Release from Polymer Capsules

    Energy Technology Data Exchange (ETDEWEB)

    Esser-Kahn, Aaron P. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Odom, Susan A. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Sottos, Nancy R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Materials Science and Engineering; White, Scott R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Aerospace Engineering; Moore, Jeffrey S. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry

    2011-07-06

    Stimuli-responsive capsules are of interest in drug delivery, fragrance release, food preservation, and self-healing materials. Many methods are used to trigger the release of encapsulated contents. Here we highlight mechanisms for the controlled release of encapsulated cargo that utilize chemical reactions occurring in solid polymeric shell walls. Triggering mechanisms responsible for covalent bond cleavage that result in the release of capsule contents include chemical, biological, light, thermal, magnetic, and electrical stimuli. We present methods for encapsulation and release, triggering methods, and mechanisms and conclude with our opinions on interesting obstacles for chemically induced activation with relevance for controlled release.

  2. Capsule implosions driven by dynamic hohlraum x-rays

    Science.gov (United States)

    Bailey, James

    2005-10-01

    Dynamic hohlraum experiments at the Z facility already implode capsules with up to 80 kJ absorbed x-ray energy. However, many challenging issues remain for ICF. The present experiments use diagnostic capsules to address two of these issues: symmetry measurement and control and building understanding of the capsule/hohlraum implosion system. A suite of x-ray spectrometers record time and space resolved spectra emitted by Ar tracer atoms in the implosion core, simultaneously from up to three different quasi-orthogonal directions. Comparing the results with simulation predictions provide severe tests of understanding. These data also can used to produce a tomographic reconstruction of the time resolved core temperature and density profiles. X-ray and neutron diagnostics are used to examine how the implosion conditions change as the capsule design changes. The capsule design changes include variations in CH wall thickness and diameter, Ge-doped CH shells, and SiO2 shells. In addition, a new campaign investigating Be capsule implosions is beginning. Be capsules may offer superior performance for dynamic hohlraum research and it may be possible to investigate NIF-relevant Be implosion issues such as the fill tube effects, sensitivity to columnar growth associated with sputtered Be capsule fabrication, and the effect of Cu dopants on implosion conditions. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the U.S. Dept. of Energy under contract No. DE-AC04-94AL85000. * In collaboration with G.A. Rochau, G.A. Chandler, S.A. Slutz, P.W. Lake, G. Cooper, G.S. Dunham, R.J. Leeper, R. Lemke, T.A. Mehlhorn, T.J. Nash, D.S. Nielsen, K. Peterson, C.L. Ruiz, D.B. Sinars, J. Torres, W. Varnum, Sandia; R.C. Mancini, T.J. Buris-Mog, UNR; I. Golovkin, J.J. MacFarlane, PRISM; A. Nikro, D. Steinman, J.D. Kilkenny, H. Xu, General Atomics; M. Bump, T.C. Moore, K-tech; D.G. Schroen, Schafer

  3. Photon Production Within Storage Capsules

    CERN Document Server

    Rittmann, P D

    2003-01-01

    This report provides tables and electronic worksheets that list the photon production rate within SrF2 and CsC1 storage capsules, particularly the continuous spectrum of bremsstrahlung photons from the slowing down of the emitted electrons (BREMCALC).

  4. Capsule endoscopy in pediatric patients

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Wireless capsule endoscope (WCE) for the investigation of the small bowel is an approved technique both in adults and children (more than 10 years old). The present review provides data on the indications, diagnostic yield, adverse events and limitations of the WCE technique in children and tries to predict the future of WCE usage in this population of patients.

  5. [Visco-hydraulic irrigation of the lens cortex. A safe ECCE method].

    Science.gov (United States)

    Friedburg, D

    1994-12-01

    The safe and effective Hydrojet nucleus expression (Klin Monatsbl Augenheilkd 1993; 202:288-291) should be completed by a safe non traumatic and easy to perform method of cortex removal. OPERATION TECHNIQUE: 8-mm tunnel incision, spiral capsulorhexis, hydrodissection and viscodissection of the nucleus, hydrojet nucleus expression. The lens cortex can be separated from the lens capsule by injection of hydroxypropylmethylcellulose (Metho), the viscoelastic substance acts as a wedge to separate the cortex from the capsule step by step. Finally the cortex is expressed by the injection of Metho. The capsule remains so clean, that often polishing is not necessary. PMMA lenses with an over all diameter of 10 or 11-mm and 7-mm optics were implanted. In 100 consecutive cases complications which occurred intraoperatively or within the following 2 days were listed. The following complications occurred: Hyphaema (2x, the blood disappeared spontaneously within 4-5 days), small cortex flake in the anterior chamber (2x), rhexis rim not intact (1x, nevertheless exact lens centration in the bag). No lesion of the capsule/zonule diaphragm, no fibrin reaction, no corneal edema. The method described is a safe method for ECCE. Capsulorhexis and tunnel incision are required. The method does not need any high technology equipment.

  6. Inflated Sporopollenin Exine Capsules Obtained from Thin-Walled Pollen

    Science.gov (United States)

    Park, Jae Hyeon; Seo, Jeongeun; Jackman, Joshua A.; Cho, Nam-Joon

    2016-06-01

    Sporopollenin is a physically robust and chemically resilient biopolymer that comprises the outermost layer of pollen walls and is the first line of defense against harsh environmental conditions. The unique physicochemical properties of sporopollenin increasingly motivate the extraction of sporopollenin exine capsules (SECs) from pollen walls as a renewable source of organic microcapsules for encapsulation applications. Despite the wide range of different pollen species with varying sizes and wall thicknesses, faithful extraction of pollen-mimetic SECs has been limited to thick-walled pollen capsules with rigid mechanical properties. There is an unmet need to develop methods for producing SECs from thin-walled pollen capsules which constitute a large fraction of all pollen species and have attractive materials properties such as greater aerosol dispersion. Herein, we report the first successful extraction of inflated SEC microcapsules from a thin-walled pollen species (Zea mays), thereby overcoming traditional challenges with mechanical stability and loss of microstructure. Morphological and compositional characterization of the SECs obtained by the newly developed extraction protocol confirms successful protein removal along with preservation of nanoscale architectural features. Looking forward, there is excellent potential to apply similar strategies across a wide range of unexplored thin-walled pollen species.

  7. Myo/Nog cells: targets for preventing the accumulation of skeletal muscle-like cells in the human lens.

    Directory of Open Access Journals (Sweden)

    Jacquelyn Gerhart

    Full Text Available Posterior capsule opacification (PCO is a vision impairing condition that arises in some patients following cataract surgery. The fibrotic form of PCO is caused by myofibroblasts that may emerge in the lens years after surgery. In the chick embryo lens, myofibroblasts are derived from Myo/Nog cells that are identified by their expression of the skeletal muscle specific transcription factor MyoD, the bone morphogenetic protein inhibitor Noggin, and the epitope recognized by the G8 monoclonal antibody. The goal of this study was to test the hypothesis that depletion of Myo/Nog cells will prevent the accumulation of myofibroblasts in human lens tissue. Myo/Nog cells were present in anterior, equatorial and bow regions of the human lens, cornea and ciliary processes. In anterior lens tissue removed by capsulorhexis, Myo/Nog cells had synthesized myofibroblast and skeletal muscle proteins, including vimentin, MyoD and sarcomeric myosin. Alpha smooth muscle actin (α-SMA was detected in a subpopulation of Myo/Nog cells. Areas of the capsule denuded of epithelial cells were surrounded by Myo/Nog cells. Some of these cell free areas contained a wrinkle in the capsule. Depletion of Myo/Nog cells eliminated cells expressing skeletal muscle proteins in 5-day cultures but did not affect cells immunoreactive for beaded filament proteins that accumulate in differentiating lens epithelial cells. Transforming growth factor-betas 1 and 2 that mediate an epithelial-mesenchymal transition, did not induce the expression of skeletal muscle proteins in lens cells following Myo/Nog cell depletion. This study demonstrates that Myo/Nog cells in anterior lens tissue removed from cataract patients have undergone a partial differentiation to skeletal muscle. Myo/Nog cells appear to be the source of skeletal muscle-like cells in explants of human lens tissue. Targeting Myo/Nog cells with the G8 antibody during cataract surgery may reduce the incidence of PCO.

  8. Lens Epithelial Cell Proliferation and Cell Density in Human Age-related Cataract

    Institute of Scientific and Technical Information of China (English)

    Xialin Liu; Yizhi Liu; Jianliang Zheng; Qiang Huang; Huling Zheng

    2000-01-01

    Purpose: To discuss the potential effect of the lens epithelial cell proliferation in age-related cataract.Methods: In vitro cell proliferation was assayed by MTT method to evaluate the lens epithelial cell density, index, and proliferation capacity in normal lens and all kinds of age-related cataract. Capsulotomy specimens from all kinds of patients who underwent cataract phacoemulsification extraction surgery were compared with the lens epithelial specimens from non-cataract lenses of Eye Bank eyes.Results: Lens epithelial cell density of central anterior capsule (LECD) in female normal lens was higher than that in male, LECD in nuclear cataract( > NⅢ ) was higher than that in normal lens, but in the mature cortical cataract, LF CD was lower. Mitotic index of three kinds of age-related cataracts in vivo had no statistical difference, neither did cell proliferation capacity of cultivated cells in vitro.Conclusion: The individual difference of lens epithelial cell density and proliferation capacity in vivo may be an important underlying cause for senile cataract in the cellular level, especially for nuclear cataract.

  9. Formation and degradation of layer-by-layer-assembled polyelectrolyte polyrotaxane capsules.

    Science.gov (United States)

    Dam, Henk H; Caruso, Frank

    2013-06-18

    We report the preparation of degradable capsules via layer-by-layer assembly using polyelectrolyte (PE) polyrotaxanes (PRXs). The PRX capsules were prepared by the sequential deposition of PRXs onto silica particles followed by the dissolution of the silica cores. The colloidal stability of the PRX capsules that are formed depends on the salt/buffer solution used in the assembly process. Various salt/buffer combinations were examined to avoid aggregation of the core-shell particles during PRX assembly and core dissolution. Using appropriate assembly conditions, we prepared colloidally stable, robust capsules. PRX capsules consisting of eight layers of PE PRXs had a wall thickness of ~15 nm. The degradation of the PRX capsules was demonstrated through the disassembly of the PE PRXs using glutathione, which cleaves the disulfide bonds linking the end-capping groups of the PE PRXs. Given the supramolecular noncovalent structure of PRXs and their adjustable properties, it is expected that PRXs will be used as building blocks for assembling advanced capsules with unique and tailored properties.

  10. Engineering multifunctional capsules through the assembly of metal-phenolic networks.

    Science.gov (United States)

    Guo, Junling; Ping, Yuan; Ejima, Hirotaka; Alt, Karen; Meissner, Mirko; Richardson, Joseph J; Yan, Yan; Peter, Karlheinz; von Elverfeldt, Dominik; Hagemeyer, Christoph E; Caruso, Frank

    2014-05-26

    Metal-organic coordination materials are of widespread interest because of the coupled benefits of inorganic and organic building blocks. These materials can be assembled into hollow capsules with a range of properties, which include selective permeability, enhanced mechanical/thermal stability, and stimuli-responsiveness. Previous studies have primarily focused on the assembly aspects of metal-coordination capsules; however, the engineering of metal-specific functionality for capsule design has not been explored. A library of functional metal-phenolic network (MPN) capsules prepared from a phenolic ligand (tannic acid) and a range of metals is reported. The properties of the MPN capsules are determined by the coordinated metals, allowing for control over film thickness, disassembly characteristics, and fluorescence behavior. Furthermore, the functional properties of the MPN capsules were tailored for drug delivery, positron emission tomography (PET), magnetic resonance imaging (MRI), and catalysis. The ability to incorporate multiple metals into MPN capsules demonstrates that a diverse range of functional materials can be generated. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Sputter-deposited Be ablators for NIF target capsules

    Energy Technology Data Exchange (ETDEWEB)

    McEachern, R.; Clford, C.; Cook, R.; Makowiecki, E.; Wallace, R.

    1997-03-26

    We have performed a series of preliminary experiments to determine whether sputter deposition of doped Be is a practical route to producing NIF target capsules with Be ablators. Films ranging in thickness from 7 to {approximately} 120 {micro}m have been deposited on spherical polymer mandrels using a bounce pan to ensure uniform coating. With no voltage bias applied to the pan, relatively porous coatings were formed that were highly permeable to hydrogen. The surface finish of these films ranged from {approximately}250 nm rms for 13-{micro}m-thick films to a minimum of {approximately}75 nm rms for an 80-{micro}m-thick film. Application of a voltage bias was found to significantly modify the film morphology. At a bias of 120 V, 7-{micro}m-thick films with a dense, fine-grained microstructure were produced. These capsules had a reflective surface with a 50 nm rms roughness. Finally, to demonstrate the ability to produce a graded dopant profile, a coating was produced in which the concentration of added Cu was varied from 2.5 atom % at the beginning to zero after 40 {micro}m of deposition.

  12. Thickening of the inferior glenohumeral capsule: an ultrasound sign for shoulder capsular contracture.

    Science.gov (United States)

    Michelin, Paul; Delarue, Yohann; Duparc, Fabrice; Dacher, Jean Nicolas

    2013-10-01

    The aim of this retrospective study was to measure the inferior glenohumeral capsule thickness of shoulders clinically affected by capsular contracture by comparison to the contralateral asymptomatic side. Bilateral shoulder ultrasound (US) examinations of 20 patients with clinically or MRI proven unilateral capsular contracture were retrospectively assessed. Inferior capsule evaluation was performed with a transducer placed within the axilla in maximally abducted shoulders. Measurements were symmetrically performed orthogonally to the inferior glenohumeral ligament (IGHL) in the axial plane; the coronal plane was used to ensure the tension of the IGHL. The significance of any difference in thickening was assessed with the Mann-Whitney test. The average thickness was 4.0 mm in shoulders with capsular contracture vs. 1.3 mm in asymptomatic contralateral shoulders (P contracture and inferior capsule thickness increase showed US features of other painful diseases of the rotator cuff. The thickness of the inferior capsule is measurable through ultrasound examination and appears to be increased in shoulders with capsular contracture. Exploration of the inferior aspect of the shoulder joint could be added to shoulder US examination protocols for capsular contracture assessment even if other rotator cuff abnormalities are diagnosed by US. • Ultrasound is increasingly used to diagnose shoulder problems. • The thickness of the inferior glenohumeral ligament is measurable in the axilla. • The inferior glenohumeral ligament appears thickened in shoulders with capsular contracture. • Capsular contracture ultrasound features can be associated with other rotator cuff problems.

  13. The Experimental Study on Implantation of Intraocular Lens in Different Animals

    Institute of Scientific and Technical Information of China (English)

    WANGGui-qin; PENGXiu-jun; GUHan-qing

    2004-01-01

    To prevent the complications in cataract surgeries, the eyes of rabbits and monkeys were implanted with intraocular lens for 360 days. Methods: The eyes of the rabbits were performed with phacoemulsification and soft intraocular lens implantation. The eyes of the monkeys were performed with extracapsular cataract extraction and hard intraocular lens implantation. Results: The postoperative reactions included corneal edema, anterior chamber exudation, posterior capsule opacification and so on. The complications in the eyes of the rabbits were more than that in the eyes of the monkeys. Conclusion: The different postoperative reactions happened in different animals. In clinical the choice of the operative method and intraocular lens depended on the case in order to acquire the best sight.

  14. Repositioning a decentered intraocular lens with 4 haptics.

    Science.gov (United States)

    Liu, Jiewei; Liu, Wenjie; Jia, Yading; Al-Mohtaseb, Zaina N; Wang, Li

    2016-03-01

    We describe a technique to reposition a decentered 4-haptic intraocular lens (IOL). Using an ophthalmic viscosurgical device, the haptic with the worst distortion is dissected from the capsular bag and pulled outside the bag. The opposite haptic (180 degrees away) is also dissected and placed in front of the anterior capsule. The remaining 2 haptics are left in the capsular bag. With this repositioning, the 2 haptics in the bag limit the IOL movement, the 2 haptics outside the bag are no longer distorted, and the IOL is centered. We present 2 cases in which this technique was used to reposition decentered 4-haptic IOLs.

  15. Using HT and DT gamma rays to diagnose mix in Omega capsule implosions

    Science.gov (United States)

    Schmitt, M. J.; Herrmann, H. W.; Kim, Y. H.; McEvoy, A. M.; Zylstra, A.; Hammel, B. A.; Sepke, S. M.; Leatherland, A.; Gales, S.

    2016-05-01

    Experimental evidence [1] indicates that shell material can be driven into the core of Omega capsule implosions on the same time scale as the initial convergent shock. It has been hypothesized that shock-generated temperatures at the fuel/shell interface in thin exploding pusher capsules diffusively drives shell material into the gas core between the time of shock passage and bang time. We propose a method to temporally resolve and observe the evolution of shell material into the capsule core as a function of fuel/shell interface temperature (which can be varied by varying the capsule shell thickness). Our proposed method uses a CD plastic capsule filled with 50/50 HT gas and diagnosed using gas Cherenkov detection (GCD) to temporally resolve both the HT “clean” and DT “mix” gamma ray burn histories. Simulations using Hydra [2] for an Omega CD-lined capsule with a sub-micron layer of the inside surface of the shell pre-mixed into a fraction of the gas region produce gamma reaction history profiles that are sensitive to the depth to which this material is mixed. An experiment to observe these differences as a function of capsule shell thickness is proposed to determine if interface mixing is consistent with thermal diffusion λii∼T2/Z2ρ at the gas/shell interface. Since hydrodynamic mixing from shell perturbations, such as the mounting stalk and glue, could complicate these types of capsule-averaged temporal measurements, simulations including their effects also have been performed showing minimal perturbation of the hot spot geometry.

  16. Lens Epithelial Cell Death Secondary to Acanthamoeba Keratitis: Absence of Capsular Bag Opacification Six Years after Cataract Surgery

    Directory of Open Access Journals (Sweden)

    Javier Moreno-Montañés

    2011-12-01

    Full Text Available Purpose: To show the evolution of anterior chamber structures 6 years after cataract surgery in a case with Acanthamoeba keratitis (AK. Methods: A 37-year-old woman with AK receiving long-term treatment with chlorhexidine, propamidine isethionate and steroids developed a white cataract and iris atrophy. Penetrating keratoplasty and cataract surgery were performed with subsequent intraocular pressure elevation requiring Molteno shunt implantation. Two years after the last surgery, endothelial decompensation developed and another penetrating keratoplasty was performed. Intraoperatively, the anterior and posterior capsules were completely transparent. Results: Six years after cataract surgery, the intraocular lens was centered with clear anterior and posterior capsules without lens epithelial cells proliferation. No Soemmering’s ring formation or posterior capsule opacification was found. Also, no zonular damage or pseudophacodonesis was observed. Conclusions: This case suggests that AK infection and AK treatment not only cause white progressive cataract but also lens epithelial cell death. The capsules may be completely clear 6 years after cataract surgery, with a good quality of vision regardless of intraocular lens material or design.

  17. Intraocular lens exchange-removing the optic intact.

    Science.gov (United States)

    Lee, Matthew Hao; Webster, Diane Lesley

    2016-01-01

    Current practice for intraocular lens (IOL) exchange is to cut the optic of the posterior chamber intraocular lens (PCIOL) prior to removing it. Great care must be taken during this maneuver to avoid a posterior capsular tear. Removing the haptics from the fibrosed capsule can also be hazardous, as it may result in zonular stress and dehiscence. A technique is described for performing foldable (one-piece acrylic) IOL removal without cutting the optic. Careful visco-dissection of the haptics with a low viscosity ophthalmic viscosurgical device (OVD) in the fibrosed peripheral capsular tunnel avoids zonular or capsular stress. Internal wound enlargement permits foldable IOL removal in one piece, whilst preserving a self-sealing sutureless corneal wound. This technique may enhance the safety and efficacy of foldable IOL exchange.

  18. Intraocular lens exchange-removing the optic intact

    Science.gov (United States)

    Lee, Matthew Hao; Webster, Diane Lesley

    2016-01-01

    Current practice for intraocular lens (IOL) exchange is to cut the optic of the posterior chamber intraocular lens (PCIOL) prior to removing it. Great care must be taken during this maneuver to avoid a posterior capsular tear. Removing the haptics from the fibrosed capsule can also be hazardous, as it may result in zonular stress and dehiscence. A technique is described for performing foldable (one-piece acrylic) IOL removal without cutting the optic. Careful visco-dissection of the haptics with a low viscosity ophthalmic viscosurgical device (OVD) in the fibrosed peripheral capsular tunnel avoids zonular or capsular stress. Internal wound enlargement permits foldable IOL removal in one piece, whilst preserving a self-sealing sutureless corneal wound. This technique may enhance the safety and efficacy of foldable IOL exchange. PMID:27366699

  19. ELECTRON MICROSCOPY STUDIES OF LENS FROM TWO CASES OF OCULAR SIDEROSIS

    Institute of Scientific and Technical Information of China (English)

    1991-01-01

    Cases report Case 1: A 50-year-old man was injuried by iron filings on his left eye. He was admitted to our hospital on Feb. 3, 1987. On examination, his visual acuity was 20/15 OD and 20/500 OS. Left eye: The cornea was clear, the anterior chamber depth was 3 CT, tyndall(-). Iris pattern is clear, pupil was 3.5×3.5mm. Dilated pupil examination: There were scattered brown-yellow ironrust under anterior capsule and the lens cortex had become totally opaque. Nuclear, posterior capsule and fundus can't be ...

  20. Thin Lens Ray Tracing.

    Science.gov (United States)

    Gatland, Ian R.

    2002-01-01

    Proposes a ray tracing approach to thin lens analysis based on a vector form of Snell's law for paraxial rays as an alternative to the usual approach in introductory physics courses. The ray tracing approach accommodates skew rays and thus provides a complete analysis. (Author/KHR)

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 More Eye ... EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health observances EyeSmart resources are also ...

  2. Species in the Cryptococcus gattii Complex Differ in Capsule and Cell Size following Growth under Capsule-Inducing Conditions

    Science.gov (United States)

    Fernandes, Kenya E.; Dwyer, Christine; Campbell, Leona T.

    2016-01-01

    ABSTRACT Cryptococcus gattii causes invasive fungal infections that have been increasing in incidence and global distribution in recent years. The major molecular genotypes of C. gattii that were previously classified as VGI to VGIV have recently been described as four new species: C. gattii (VGI), C. deuterogattii (VGII), C. bacillisporus (VGIII), and C. tetragattii (VGIV). The main driver for their classification has been phylogeny, and phenotypic diversity has not yet been extensively characterized. This study examines variation in attributes related to virulence and pathogenicity, including capsule thickness, cell size, tolerance to temperature, oxidative and osmotic stress, and cell wall integrity. A capsule induction agar using diluted Sabouraud medium revealed significant differences in capsule and cell size across the C. gattii species complex and produced irregularly shaped elongated cells in a number of strains. C. gattii/VGI strains possessed the largest capsules of all species but had smaller cells, while C. deuterogattii/VGII strains possessed the largest cells of all species but had smaller capsules. Overall thermotolerance was highest in C. deuterogattii/VGII strains, while a number of C. bacillisporus/VGIII, and C. tetragattii/VGIV strains had substantially reduced growth at 37°C. There was no significant difference among species in their tolerances to oxidative or osmotic stresses, and there was no evidence for defects in cell wall integrity in strains producing irregular cells. These data support the division of the C. gattii species complex into distinctly identified species and suggest underlying reasons for their differences in virulence, epidemiology, and host preference. IMPORTANCE Infections with the fungal pathogen Cryptococcus gattii have been increasing in recent years. Recently, four different species have been described within C. gattii, which correspond to four previously known molecular genotypes (VGI to VGIV). Examining

  3. Innervation and functional characteristics of connective tissues, especially elastic fibers, in human fetal thoracic intervertebral articular capsule and its surroundings.

    Science.gov (United States)

    Shiraishi, Yosuke; Kobayashi, Miya; Yasui, Masaya; Ozaki, Noriyuki; Sugiura, Yasuo

    2003-05-01

    The articular capsules between the thoracic vertebrae, which have physiologically different functions from those of other levels of the vertebrae, have yet to be subjected to neuro-anatomical and fine structural analysis. In the present study, we analyzed serial frozen sections of decalcified thoracic vertebrae in human fetuses, and identified the articular capsule tissue with its unique distribution of elastic fibers. The fine structure of the elastic fibers was studied by transmission electron microscopy. In the early-stage fetus, the fibrous membrane forming the lateral intervertebral articular capsule contained abundant thin elastic fibers consisting of microfibrils. In the late-stage fetus, the lateral capsule of fibrous membrane was occupied by thick elastic fibers. A medial articular capsule, namely the ligamenta flava, contained numerous thick elastic fibers in both early and late-stage fetuses. The distributional differences in nerve fibers between early and late-stage fetuses were determined by immunostaining, using antibodies raised against protein gene product 9.5 (PGP 9.5; ubiquitin carboxyl-terminal hydrolase). Innervation by PGP 9.5 immunoreactive fibers was limited to the areas of the articular capsules near the blood vessels, which may indicate their functional relation with blood flow. No PGP 9.5 immunoreactive fibers were found in the ligamenta flava of the late-stage fetus. Innervation might be directly involved in the development of the intervertebral articular capsules in normal human fetuses.

  4. Lens glutathione homeostasis: Discrepancies and gaps in knowledge standing in the way of novel therapeutic approaches.

    Science.gov (United States)

    Fan, Xingjun; Monnier, Vincent M; Whitson, Jeremy

    2016-06-29

    Cataract is the major cause of blindness worldwide. The WHO has estimated around 20 million people have bilateral blindness from cataract, and that number is expected to reach 50 million in 2050. The cataract surgery is currently the main treatment approach, though often associated with complications, such as Posterior Capsule Opacification (PCO)-also known as secondary cataract. The lens is an avascular ocular structure equipped with an unusually high level of glutathione (GSH), which plays a vital role in maintaining lens transparency by regulating lenticular redox state. The lens epithelium and outer cortex are thought to be responsible for providing the majority of lens GSH via GSH de novo synthesis, assisted by a continuous supply of constituent amino acids from the aqueous humor, as well as extracellular GSH recycling from the gamma-glutamyl cycle. However, when de novo synthesis is impaired, in the presence of low GSH levels, as in the aging human lens, compensatory mechanisms exist, suggesting that the lens is able to uptake GSH from the surrounding ocular tissues. However, these uptake mechanisms, and the GSH source and its origin, are largely unknown. The lens nucleus does not have the ability to synthesize its own GSH and fully relies on transport from the outer cortex by yet unknown mechanisms. Understanding how aging reduces GSH levels, particularly in the lens nucleus, how it is associated with age-related nuclear cataract (ARNC), and how the lens compensates for GSH loss via external uptake should be a major research priority. The intent of this review, which is dedicated to the memory of David C. Beebe, is to summarize our current understanding of lens GSH homeostasis and highlight discrepancies and gaps in knowledge that stand in the way of pharmacologically minimizing the impact of declining GSH content in the prevention of age-related cataract.

  5. Perform Ultrasonic Testing on Cs Capsule Overpacks

    Energy Technology Data Exchange (ETDEWEB)

    DAVIS, S.J.

    2000-04-06

    This procedure provides a safe, uniform method for the performance of the ultrasonic weld inspection of the Cesium capsule overpacks. The inspection system will detect cracks, lack of fusion, and lack of penetration. This computer controlled automated system will perform the examination once the capsule overpack has been placed in the pool cell. Examination of the capsule overpacks will be in accordance with drawing H-283014, REV. 0 ,and a certified NDE examiner will perform the test procedure, provide analysis, and test documentation.

  6. Colon Capsule Endoscopy: Review and Perspectives

    Directory of Open Access Journals (Sweden)

    David Friedel

    2016-01-01

    Full Text Available Colon capsule endoscopy utilizing PillCam COLON 2 capsule allows for visualization potentially of the entire colon and is currently approved for patients who cannot withstand the rigors of traditional optical colonoscopy (OC and associated sedation as well as those that had an OC that was incomplete for technical reasons other than a poor preparation. We will then describe the prior experience and current status of colon capsule endoscopy.

  7. Continuous image distortion by astrophysical thick lenses

    CERN Document Server

    Kling, Thomas P

    2011-01-01

    Image distortion due to weak gravitational lensing is examined using a non-perturbative method of integrating the geodesic deviation and optical scalar equations along the null geodesics connecting the observer to a distant source. The method we develop continuously changes the shape of the pencil of rays from the source to the observer with no reference to lens planes in astrophysically relevant scenarios. We compare the projected area and the ratio of semi-major to semi-minor axes of the observed elliptical image shape for circular sources from the continuous, thick-lens method with the commonly assumed thin-lens approximation. We find that for truncated singular isothermal sphere and NFW models of realistic galaxy clusters, the commonly used thin-lens approximation is accurate to better than 1 part in 10^4 in predicting the image area and axes ratios. For asymmetric thick lenses consisting of two massive clusters separated along the line of sight in redshift up to \\Delta z = 0.2, we find that modeling the ...

  8. The effect of lens parameters on the development of the primary angle-closure glaucoma

    Institute of Scientific and Technical Information of China (English)

    Zhaohui Feng; Naixue Sun; Aiyi Zhou; Donggang Han; Yun Long; Zhao Wang; Xiaohua Wang

    2007-01-01

    Objective:To investigate the role the lens dimensions played on the pathogenesis of primary angle-closure glaucoma.Methods:38 eyes of 20 patients with primary angle-closure glaucoma (PACG) and 35 eyes of 22 normal individuals without ocular abnormalities were examined. The anatomical parameters of the lens and other structures of the anterior segment were calculated using B ultrasound, computer image processing and ultrasound biomicroscopy (UBM). The parameters were compared between the patients and normal subjects. Correlation analysis was used to determine the relationship between the radii of curvature of the anterior lens surface (RCALS) and the other parameters of the anterior segment. Results:Compared with the normal eyes, the eyes of PACG had thicker lens, steeper curvature of anterior lens surface, decreased depth of the anterior chamber, narrower chamber angle, and more anterior position of the ciliary bodies and lens. All these differences were significant(P < 0.05 or P < 0.01). In the PACG group, the RCALS had significantly negative correlation with the central and peripheral lens thickness (P < 0.01 and P < 0.05 respectively), and had positive correlation with relative lens position, anterior chamber depth (ACD), angle-open distance at 500 um(AOD500), trabecular iris angle(TIA) and trabecular ciliary processes distance(TCPD, P < 0.05 or P < 0.01 ). Conclusion:The occurrence of PACG is relevant to the abnormal anatomical structures of the anterior segment. Among all factors, the lens parameters play an important role in the pathogenesis. Increased lens thickness, relative more anterior position of lens, especially steepened curvature of anterior lens surface are predisposing factors of the pathologic phenomenon in PACG including pupillary blockage, shallow anterior chamber, secondary closure of chamber angle and elevation of intraocular pressure.

  9. Retina projection using curved lens arrays

    Science.gov (United States)

    Yen, Hao-Ren; Su, Guo-Dung J.

    2016-09-01

    In this paper, we propose a multi-channel imaging system which combines the principles of an insect's compound eye and optical cluster eye. The system consists of two curved structure lens arrays with different pitches. Both of them have the same curvature and the radiuses of the lenses in the arrays are optimized to focus rays on the retina. The optical axes of different channels are tilted to each other in order to reduce the optical system volume and transmit a wide field of view. Each channel of an array of multiple optical system transfers only a part of the field of view. Each partial image passes through each channel and stitches together on the retina to reconstruct a complete image. In order to simulate the image stitching, we also build an eye model. The thickness from the panel to the last surface of lens group is less than 25mm. The panel size is designed to be 4 inch which is the scale of eyeglass. The system can provide a large field of view about 150 degrees which is much wider than the commercial products. By using the 3D printer, we can make a model of lens array to achieve our design.

  10. Pitfalls in aphakic contact lens fitting

    Directory of Open Access Journals (Sweden)

    Dada Vijay

    1990-01-01

    Full Text Available We examined 23 consecutive cases of unilateral aphakia reporting to the contact lens office for endothelial count and morphology, corneal thickness and toricity. The fellow eye served as a control in all the cases. It was found that there is a significant drop in the central endothelial cell density, and change in the size and shape of the cells. These observations indicate a thermodynamically unstable state. The aphakic corneas were thicker than the controls but not to a significant extent. The cell count and pachymetry had no statistical correlation. Toricity of the aphakic corneas make successful fitting of a lens difficult. Since prolonged use of extended wear gas permeable as well as hydrogel lenses have a deleterious effect on the endothelium it is suggested that a careful case selection be made and strict monitoting carried out at follow up. These corneas are liable for decompensation with only mild noxious stimuli. This article is intended to acquaint the ophthalmologist with the pitfalls in aphakic contact lens fitting so that a cautious follow up may be planned.

  11. Biocompatible multilayer capsules engineered with a graphene oxide derivative: synthesis, characterization and cellular uptake

    Science.gov (United States)

    Del Mercato, Loretta L.; Guerra, Flora; Lazzari, Gianpiero; Nobile, Concetta; Bucci, Cecilia; Rinaldi, Rosaria

    2016-03-01

    Graphene-based capsules have strong potential for a number of applications, including drug/gene delivery, tissue engineering, sensors, catalysis and reactors. The ability to integrate graphene into carrier systems with three-dimensional (3D) geometry may open new perspectives both for fundamental tests of graphene mechanics and for novel (bio)technological applications. However, the assembly of 3D complexes from graphene or its derivatives is challenging because of its poor stability under biological conditions. In this work, we attempted to integrate a layer of graphene oxide derivative into the shell of biodegradable capsules by exploiting a facile layer-by-layer (LbL) protocol. As a first step we optimized the LbL protocol to obtain colloidal suspensions of isolated capsules embedding the graphene oxide derivative. As a following step, we investigated in detail the morphological properties of the hybrid capsules, and how the graphene oxide derivative layer influences the porosity and the robustness of the multilayer composite shells. Finally, we verified the uptake of the capsules modified with the GO derivative by two cell lines and studied their intracellular localization and biocompatibility. As compared to pristine capsules, the graphene-modified capsules possess reduced porosity, reduced shell thickness and a higher stability against osmotic pressure. They show remarkable biocompatibility towards the tested cells and long-term colloidal stability and dispersion. By combining the excellent mechanical properties of a graphene oxide derivative with the high versatility of the LbL method, robust and flexible biocompatible polymeric capsules with novel characteristics have been fabricated.Graphene-based capsules have strong potential for a number of applications, including drug/gene delivery, tissue engineering, sensors, catalysis and reactors. The ability to integrate graphene into carrier systems with three-dimensional (3D) geometry may open new perspectives

  12. Critical swelling of fluctuating capsules

    Science.gov (United States)

    Diamant, Haim; Haleva, Emir

    2009-03-01

    In many natural transport processes the solute molecules to be transported are encapsulated in semipermeable, flexible membrane vesicles of micron size. We study the swelling of such fluctuating capsules, as the number of encapsulated particles is increased, or the concentration of the outer solution is decreased. The approach to the maximum volume-to-area ratio and the associated buildup of membrane tension involve a continuous phase transition and follow universal scaling laws. The criticality and its features are model-independent, arising solely from the interplay between volume and surface degrees of freedom.ootnotetextE. Haleva and H. Diamant, Phys. Rev. Lett. 101, 078104 (2008).

  13. Biocompatible multilayer capsules engineered with a graphene oxide derivative: synthesis, characterization and cellular uptake.

    Science.gov (United States)

    del Mercato, Loretta L; Guerra, Flora; Lazzari, Gianpiero; Nobile, Concetta; Bucci, Cecilia; Rinaldi, Rosaria

    2016-04-14

    Graphene-based capsules have strong potential for a number of applications, including drug/gene delivery, tissue engineering, sensors, catalysis and reactors. The ability to integrate graphene into carrier systems with three-dimensional (3D) geometry may open new perspectives both for fundamental tests of graphene mechanics and for novel (bio)technological applications. However, the assembly of 3D complexes from graphene or its derivatives is challenging because of its poor stability under biological conditions. In this work, we attempted to integrate a layer of graphene oxide derivative into the shell of biodegradable capsules by exploiting a facile layer-by-layer (LbL) protocol. As a first step we optimized the LbL protocol to obtain colloidal suspensions of isolated capsules embedding the graphene oxide derivative. As a following step, we investigated in detail the morphological properties of the hybrid capsules, and how the graphene oxide derivative layer influences the porosity and the robustness of the multilayer composite shells. Finally, we verified the uptake of the capsules modified with the GO derivative by two cell lines and studied their intracellular localization and biocompatibility. As compared to pristine capsules, the graphene-modified capsules possess reduced porosity, reduced shell thickness and a higher stability against osmotic pressure. They show remarkable biocompatibility towards the tested cells and long-term colloidal stability and dispersion. By combining the excellent mechanical properties of a graphene oxide derivative with the high versatility of the LbL method, robust and flexible biocompatible polymeric capsules with novel characteristics have been fabricated.

  14. Impact of Laser Capsulotomy in the Quality of Life of the Elderly with Posterior Capsule Opacity after Cataract Surgery

    Directory of Open Access Journals (Sweden)

    Armando Rafael Milanés Armengol

    2013-04-01

    Full Text Available Background: the opacity of the posterior lens capsule after cataract surgery has decreased in recent years but its incidence remains high.Objective: To assess the impact of the opacification of the posterior lens capsule and its treatment with laser capsulotomy on visual function and life quality of patients after cataract surgery. Methods: A case series study of elderly patients with diagnose of opacity in the posterior lens capsule after cataract surgery who were treated with laser capsulotomy from January 2010 to January 2011 in the General University Hospital of Cienfuegos was conducted. A survey and a battery of assessment tools to measure functional status were applied as well as the VF-14 test for the assessment of life quality. Results: We observed an improvement in the average value of the visual acuity (0, 326 by 0, 726 practiced capsulotomy to later, with an average range of efficiency improvement of a binocular visual 6.96%, likewise improved functional visual capacity from 57, 728 to 96, 223; exploration by VF-14 showed a higher life quality. The degree of overall validism was recovered in 86, 56 % of patients and only one patient was totally dependent for the realization of daily life activities. Conclusions: Patients who underwent laser capsulotomy showed evidence of improvement in visual acuity, functionality and life quality.

  15. Photochromic lens mirror-coated with Cr

    Science.gov (United States)

    Shin, Sungho; Lee, Myeongkyu

    2007-11-01

    We have designed and fabricated mirror-coated photochromic lenses for use in sunglasses. These lenses consisted of a Cr thin film sandwiched between two SiO2 layers on the front surface and an anti-reflection (AR) coating on the backside. The SiO2 films above and below the Cr layer were introduced as the protection and buffer layers, respectively. The AR coating was to suppress back-reflection from the lens surface. Deposition of all coating layers were carried out by an e-beam evaporator under Ar atmosphere at P = 10-5 Torr and T = 70 °C. As expected, the overall transmittance decreased with increasing Cr thickness. For a Cr layer of 5 nm thickness, it changed from about 45% in the bleached state down to 25% after exposure to sunlight. This is consistent with the transmission range typically required for sunglasses.

  16. Evaluation of immersion 20 MHz B-scan ultrasonography in observing lens in the alkali burn eyes

    Institute of Scientific and Technical Information of China (English)

    Qing-Hua; Yang; Bing; Chen; Li-Qiang; Wang; Guang-Hua; Peng; Zhao-Hui; Li; Yi-Fei; Huang

    2014-01-01

    ·AIM: To evaluate the accuracy of 20 MHz immersion Bscan ultrasonography in observing lens and to investigate the value of this noninvasive preoperative diagnosis method in alkali burn eyes.·METHODS: It was a comparative study. Fifty-six cases(56 eyes) of alkali burn eyes were examined by ultrasound biomicroscopy(UBM) and immersion 20 MHz B-scan ultrasonography from June 2011 to April 2013,the images were analyzed, and the ultrasonographic diagnosis compared with the operation results.·RESULTS: In 56 alkali burn eyes examined by UBM, the lens were not detected in 16 eyes; the IOL could be detected in 2 eyes; the anterior lens capsule surface or/and the front lens could be detected in 18 eyes, and lens opacification in 3 eyes of them; suspected abnormal lens were detected in the other 20 eyes. In all the same eyes examined by immersion 20 MHz B-scan ultrasonography,the lens were not detected in 16 eyes; the IOL could be detected in 2 eyes; 24 abnormal lens(opacity, lens expansion, shrinkage) and 14 normal lens were found.Compared with the intraoperative findings, the diagnostic accordance rate of the immersion 20 MHz B-scan appearance of lens was 100%(56/56), which was significantly higher than examined by UBM 57.14%(32/56)(χ2=30.55, P =0.0000).·CONCLUSION: Immersion 20 MHz B-scan ultrasonography can observe the lens accurately in alkali burn eyes. It has important clinical value to combine with UBM in eyes of alkali burn.

  17. LASER INDUCED THERMAL LENS EFFECT

    Institute of Scientific and Technical Information of China (English)

    沈俊; 黄孟才; 江景云; 施教芳

    1991-01-01

    The thermal lens effect has emerged in recent years as a novel ,highly sensitive tool for the study of the very weak molecular absorption of light energy,This paper discusses the theory and technique of the thermal lens measurement.Some opplications of the thermal lens measurement are described.A mode-mismatched dual-beam thermal lens experimental arragement with a modulated probe beam ,designed by the authors.for trace analysis is presented,and its detection limit was found to be 4.1×10-7 for Cu(Ⅱ) in ethanol and 80 mW excitation power.

  18. Chitosan Derivatives/Calcium Carbonate Composite Capsules Prepared by the Layer-by-Layer Deposition Method

    Directory of Open Access Journals (Sweden)

    Takashi Sasaki

    2008-01-01

    Full Text Available Core/shell capsules composed of calcium carbonate whisker core (rod-like shape and chitosan/chitosansulfate shell were prepared by the layer-by-layer deposition technique. Two chitosan samples of different molecular weights (Mw=9.7×104 and 1.09×106g·mol-1 were used as original materials. Hollow capsules were also obtained by dissolution of the core in hydrochloric acid. Electron microscopy revealed that the surface of the shell is rather ragged associated with some agglomerates. The shell thickness l obeys a linear relation with respect to the number of deposited layers m as l=md+a(a>0. The values of d (thickness per layer were 4.0 and 1.0 nm for the higher and lower Mw chitosan materials, respectively, both of which are greater than the thickness of the monolayer. The results suggest that the feature of the deposition does not obey an ideal homogeneous monolayer-by-monolayer deposition mechanism. Shell crosslinked capsules were also prepared via photodimerization reaction of cinnamoyl groups after a deposition of cinnamoyl chitosan to the calcium carbonate whisker core. The degree of crosslink was not enough to stabilize the shell structure, and hollow capsule was not obtained.

  19. How helpful is capsule endoscopy to surgeons?

    Institute of Scientific and Technical Information of China (English)

    Osman Ersoy; Bulent Sivri; Yusuf Bayraktar

    2007-01-01

    Capsule endoscopy is a new technology that, for the first time, allows complete, non-invasive endoscopic imaging of the small bowel. The efficacy of capsule endoscopy in the diagnosis of suspected small bowel diseases has been established. Important applications for surgeons include observations of obscure gastrointestinal bleeding and small bowel neoplasms.

  20. The future of wireless capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We outline probable and possible developments with wireless capsule endoscopy. It seems likely that capsule endoscopy will become increasingly effective in diagnostic gastrointestinal endoscopy. This will be attractive to patients especially for cancer or varices detection because capsule endoscopy is painless and is likely to have a higher take up rate compared to conventional colonoscopy and gastroscopy. Double imager capsules with increased frame rates have been used to image the esophagus for Barrett's and esophageal varices. The image quality is not bad but needs to be improved if it is to become a realistic substitute for flexible upper and lower gastrointestinal endoscopy. An increase in the frame rate, angle of view, depth of field, image numbers, duration of the procedure and improvements in illumination seem likely. Colonic, esophageal and gastric capsules will improve in quality, eroding the supremacy of flexible endoscopy, and become embedded into screening programs. Therapeutic capsules will emerge with brushing, cytology, fluid aspiration, biopsy and drug delivery capabilities. Electrocautery may also become possible. Diagnostic capsules will integrate physiological measurements with imaging and optical biopsy, and immunologic cancer recognition. Remote control movement will improve with the use of magnets and/or electrostimulation and perhaps electromechanical methods. External wireless commands will influence capsule diagnosis and therapy and will increasingly entail the use of real-time imaging. However, it should be noted that speculations about the future of technology in any detail are almost always wrong.

  1. Intrauterine fertilization capsules--a clinical trial

    DEFF Research Database (Denmark)

    Lenz, S; Lindenberg, S; Sundberg, K

    1991-01-01

    chorionic gonadotropin. Oocytes were collected by ultrasonically guided transvaginal aspiration, and spermatozoa were prepared by swim-up technique. The gametes were placed in agar capsules 4 hr after oocyte collection, and the capsules were introduced to the uterine fundus using an insertion tube...

  2. Physics of electrostatic lens

    Science.gov (United States)

    1981-09-01

    The purpose of this program was to study the physics of the ion-energy boosting electrostatic lens for collective ion acceleration in the Luce diode. Extensive work was done in preparation for experiments on the PI Pulserad 1150. Analytic work was done on the orbit of protons in a mass spectrometer and a copper stack for nuclear activation analysis of proton energy spectrum has been designed. Unfortunately, a parallel program which would provide the Luce diode for the collective ion acceleration experiment never materialized. As a result no experiments were actually performed on the Pulserad 1150.

  3. Treatment of a dislocated lens by transcorneal vitrectomy and bimanual phacoemulsification

    Directory of Open Access Journals (Sweden)

    Watanabe A

    2014-08-01

    Full Text Available Akira Watanabe, Tamaki Gekka, Hiroshi Tsuneoka Department of Ophthalmology, The Jikei University School of Medicine, Tokyo, Japan Background: As a method of treatment for a dropped lens nucleus, which occurred during cataract surgery, the dropped lens nucleus was removed through the corneal wound without using pars plana vitrectomy (PPV. After vitrectomy, the dropped lens nucleus was floated on the perfluorocarbon liquid (PFCL. The floating lens nucleus was then phacoemulsified and aspirated. During surgery, irrigation from the anterior chamber was performed. This method was very effective for treatment of a dropped hard nucleus.Case report: During cataract surgery on the left eye of an 80-year-old woman, a posterior capsule rupture occurred. As a result, the lens nucleus dropped into the vitreous cavity. Irrigation to the anterior chamber was performed, with an anterior chamber maintainer inserted through a newly created side port at the corneal limbus. A vitreous cutter and a light guide were inserted in order to perform vitrectomy through the corneal incisions that were created for the cataract surgery. After vitrectomy, the dropped lens nucleus was floated using PFCL. The floating lens nucleus was removed by a bimanual phacoemulsification technique, with the anterior chamber irrigation continuing. The separation of the irrigation port and the aspiration port allowed for effective treatment of the dropped nucleus that was floating on the PFCL, even using a ­phacoemulsification machine with a peristaltic pump system. Safe and effective vitrectomy, similar to a PPV, could be performed with this method using three corneal ports.Conclusion: This technique may allow safer and more effective treatment for a dropped lens nucleus compared with conventional PPV. With this technique, corneal distortion due to surgical manipulation can lead to reduced visibility of the posterior eye. Keywords: dislocated lens, transcorneal vitrectomy, bimanual

  4. Thermoregulation of Capsule Production by Streptococcus pyogenes

    Science.gov (United States)

    Kang, Song Ok; Wright, Jordan O.; Tesorero, Rafael A.; Lee, Hyunwoo; Beall, Bernard; Cho, Kyu Hong

    2012-01-01

    The capsule of Streptococcus pyogenes serves as an adhesin as well as an anti-phagocytic factor by binding to CD44 on keratinocytes of the pharyngeal mucosa and the skin, the main entry sites of the pathogen. We discovered that S. pyogenes HSC5 and MGAS315 strains are further thermoregulated for capsule production at a post-transcriptional level in addition to the transcriptional regulation by the CovRS two-component regulatory system. When the transcription of the hasABC capsular biosynthetic locus was de-repressed through mutation of the covRS system, the two strains, which have been used for pathogenesis studies in the laboratory, exhibited markedly increased capsule production at sub-body temperature. Employing transposon mutagenesis, we found that CvfA, a previously identified membrane-associated endoribonuclease, is required for the thermoregulation of capsule synthesis. The mutation of the cvfA gene conferred increased capsule production regardless of temperature. However, the amount of the capsule transcript was not changed by the mutation, indicating that a post-transcriptional regulator mediates between CvfA and thermoregulated capsule production. When we tested naturally occurring invasive mucoid strains, a high percentage (11/53, 21%) of the strains exhibited thermoregulated capsule production. As expected, the mucoid phenotype of these strains at sub-body temperature was due to mutations within the chromosomal covRS genes. Capsule thermoregulation that exhibits high capsule production at lower temperatures that occur on the skin or mucosal surface potentially confers better capability of adhesion and invasion when S. pyogenes penetrates the epithelial surface. PMID:22615992

  5. Posterior capsule opacification and neovascularization treated with intravitreal bevacizumab and Nd:YAG capsulotomy

    Science.gov (United States)

    Sánchez-Castro, Grimelda Yuriana; Hitos-Fájer, Alejandra; Mendoza-Schuster, Erick; Velez-Montoya, Raul; Velasco-Barona, Cecilio Francisco

    2008-01-01

    We reported a 75-year-old diabetic man, who developed opacification and neovascularization of the posterior capsule after extracapsular cataract extraction and posterior chamber intraocular lens implantation. The patient was treated with two injections of 2.5 mg of intravitreal bevacizumab. The treatment produced an important regression of the posterior capsular new vessels, allowing us to perform a successful Nd:YAG capsulotomy, clearing the visual axis and improving the visualization of the posterior pole. Even though, best corrected visual acuity was 20/200 due to diabetic macular edema. PMID:19668770

  6. [Intraocular lens implantation in developmental lens disorders in children].

    Science.gov (United States)

    Kanigowska, Krystyna; Grałek, Mirosława; Kepa, Beata; Chipczyńska, Barbara

    2009-01-01

    The pediatric cataract surgery in eyes with developmental disorders, stay with still considerable challenge. At children, the lasting vision development extorts necessity quick settlement of refraction defect formed after operation. The intraocular lens old boy with cataract in microspherophakia and 12 years old boy with cataract in lens with coloboma. One-piece flexible and rigid PMMA intraocular lens was placed with success at posterior chamber without scleral fixations and without using capsular tension ring in this cases. After 3 years of observation there were no decentration or dislocation of intraocular lens in both children. Authors concluded that in some cases posterior chamber intraocular lens implantation despite defective zonular or capsular support, can make up the effective method of surgical treatment without risk of early dislocation.

  7. Capsule of parotid gland tumor: evaluation by 3.0 T magnetic resonance imaging using surface coils

    Energy Technology Data Exchange (ETDEWEB)

    Ishibashi, Mana; Fujii, Shinya; Nishihara, Keisuke; Matsusue, Eiji; Kodani, Kazuhiko; Kaminou, Toshio; Ogawa, Toshihide (Div. of Radiology, Dept. of Pathophysiological and Therapeutic Science, Tottori Univ. Faculty of Medicine, Tottori (Japan)), e-mail: ishibashi-ttr@umin.ac.jp; Kawamoto, Katsuyuki (Div. of Otolaryngology, Head and Neck Surgery, Dept. of Medicine of Sensory and Motor Organs, Tottori Univ. Faculty of Medicine, Tottori (Japan))

    2010-12-15

    Background: Magnetic resonance (MR) imaging of parotid gland tumors has been widely reported, although few reports have evaluated the capsule of parotid gland tumors in detail. Purpose: To evaluate the diagnostic usefulness of 3.0 T MR imaging with surface coils for detection of the parotid gland tumor capsule, and to clarify the characteristics of the capsules. Material and Methods: Seventy-eight patients with parotid gland tumors (63 benign and 15 malignant) were evaluated. Axial and coronal T2-weighted and contrast-enhanced T1-weighted images were obtained using a 3.0 T MR scanner with 70 mm surface coils. It was retrospectively assessed whether each parotid gland tumor was completely surrounded by a capsule. The capsule was classified as regular or irregular in terms of capsular thickness, and as none, mildly, or strongly enhancing in terms of contrast enhancement. Visual interpretations were compared with histopathological findings to evaluate the diagnostic ability of MR imaging to detect parotid gland tumor capsules. Statistical evaluation was conducted concerning the presence of capsules, capsular irregularity, and the difference in contrast enhancement between benign and malignant tumors, and that between pleomorphic adenomas and Warthin's tumors. Results: Capsules completely surrounding the tumor on MR imaging yielded a sensitivity of 87.7% (50/57), specificity of 90.5% (19/21), and accuracy of 88.5% (69/78). Benign tumors had a capsule completely surrounding the tumor significantly more often than malignant tumors (P = 0.009). Concerning capsular irregularity, malignant tumors tended to have more irregular capsules than benign tumors, although there were no significant differences. The capsules of malignant tumors enhanced significantly more strongly than those of benign tumors (P = 0.018). Conclusion: 3.0 T MR imaging using surface coils could correctly depict parotid gland tumor capsules in most cases. Most benign and some malignant tumors had

  8. Effects of different antioxidants on lens-induced uveitis.

    Science.gov (United States)

    Koch, F H; Augustin, A J; Grus, F H; Spitznas, M

    1996-07-01

    For evaluation of the effects of different free-radical scavengers on biochemical changes in lens-induced uveitis (LIU), ten male Wistar rats were sensitized for 8 weeks using bovine lens protein and Freund's adjuvant. The uveitis was induced by disruption of the lens capsule. One group of animals received superoxide dismutase and catalase (SOD/CAT); a second group of animals was treated with vitamin E. Lipid peroxides (LPO) of the retinal tissue and aqueous humor served as parameter of oxidative tissue damage. Glutathione (GSH/GSSG) of the aqueous humor was evaluated as a parameter of the tissue's redox state. For evaluation of the inflammatory response, myeloperoxidase activity (MPO) was determined in the iris/ciliary-body complex. SOD/CAT produced no improvement in the significantly (P vitamin E treatment the GSH/GSSG and LPO values in aqueous humor were markedly improved as compared with controls. Retinal LPO values were significantly (P vitamin E can do so. However, the inflammatory response itself is not reduced. To achieve global results, drugs are necessary that act on both free radicals produced by noninflammatory pathways and those originating from inflammation.

  9. Panoramic lens applications revisited

    Science.gov (United States)

    Thibault, Simon

    2008-04-01

    During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

  10. Morphometry of the lumbar zygapophyseal facet capsule and cartilage with special reference to degenerative osteoarthritic changes: an anatomical study using fresh cadavers of elderly Japanese and Korean subjects.

    Science.gov (United States)

    Tanno, Iwao; Murakami, Gen; Oguma, Hiroshi; Sato, Shu-Ichi; Lee, U-Young; Han, Seung-Ho; Yamashita, Toshihiko

    2004-01-01

    Morphometric data were obtained from fresh cadaver dissections, and observations of degenerative changes in the joint cartilage (DCs) were analyzed to determine whether the morphometric parameters of the lumbar zygapophyseal joint capsule varied according to the presence and severity of DCs. There have been no previous morphometric studies of the facet capsule that describe age-related DCs. Using 23 fresh osteoligamentous lumbar spines from donated cadavers, we performed morphometric investigations of the surface areas of the joints and their capsules and measured the capsular thickness. We hypothesized that the ratio of the inner capsular area to the joint surface area for each facet (the capsule/facet index) could serve as an index showing a functional aspect of a large or small capsule. Our results showed that the joint surface area increased significantly with increasing severity of DCs, according to Grogan's classification. Facets with advanced DCs tended to have a small inner capsular surface. The capsule/facet index generally correlated positively with capsular thickness, especially the dorsal portion; however, this was not true for the ventral portion. The index also correlated negatively with DC progression. Thus, lumbar facet DCs were strongly linked to reconstructive alterations in capsular size, thickness, and looseness. The occurrence and progression of DCs narrowed the joint capsule, especially the dorsal portion, and this seemed to decrease the potential looseness of the joint. Conversely, these capsular alterations seemed to accelerate DC progression. A negative adaptation cycle seemed to occur.

  11. Lightweight, highly compressible, noncrystalline cellulose capsules.

    Science.gov (United States)

    Carrick, Christopher; Lindström, Stefan B; Larsson, Per Tomas; Wågberg, Lars

    2014-07-08

    We demonstrate how to prepare extraordinarily deformable, gas-filled, spherical capsules from nonmodified cellulose. These capsules have a low nominal density, ranging from 7.6 to 14.2 kg/m(3), and can be deformed elastically to 70% deformation at 50% relative humidity. No compressive strain-at-break could be detected for these dry cellulose capsules, since they did not rupture even when compressed into a disk with pockets of highly compressed air. A quantitative constitutive model for the large deformation compression of these capsules is derived, including their high-frequency mechanical response and their low-frequency force relaxation, where the latter is governed by the gas barrier properties of the dry capsule. Mechanical testing corroborated these models with good accuracy. Force relaxation measurements at a constant compression rendered an estimate for the gas permeability of air through the capsule wall, calculated to 0.4 mL μm/m(2) days kPa at 50% relative humidity. These properties taken together open up a large application area for the capsules, and they could most likely be used for applications in compressible, lightweight materials and also constitute excellent model materials for adsorption and adhesion studies.

  12. [Evaluation of nopal capsules in diabetes mellitus].

    Science.gov (United States)

    Frati Munari, A C; Vera Lastra, O; Ariza Andraca, C R

    1992-01-01

    To find out if commercial capsules with dried nopal (prickle-pear cactus, Opuntia ficus indica may have a role in the management of diabetes mellitus, three experiments were performed: 30 capsules where given in fasting condition to 10 diabetic subjects and serum glucose was measured through out 3 hours; a control test was performed with 30 placebo capsules. OGTT with previous intake of 30 nopal or placebo capsules was performed in ten healthy individuals. In a crossover and single blinded study 14 diabetic patients withdrew the oral hypoglycemic treatment and received 10 nopal or placebo capsules t.i.d. during one week; serum glucose, cholesterol and tryglycerides levels were measured before and after each one-week period. Five healthy subjects were also studied in the same fashion. Opuntia capsules did not show acute hypoglycemic effect and did not influence OGTT. In diabetic patients serum glucose, cholesterol and tryglycerides levels did not change with Opuntia, but they increased with placebo (P nopal, while cholesterol and triglycerides decreased (P < 0.01 vs. placebo). The intake of 30 Opuntia capsules daily in patients with diabetes mellitus had a discrete beneficial effect on glucose and cholesterol. However this dose is unpractical and at present it is not recommended in the management of diabetes mellitus.

  13. [Karyosphere capsule in Tribolium castaneum oocytes].

    Science.gov (United States)

    Batalova, F M; Bogoliubov, D S

    2013-01-01

    Structure and composition of the karyosphere (karyosome) capsule were studied in the oocytes of a laboratory insect, Tribolium castaneum, with the use of electron microscopy and immunoelectron cytochemistry. Basing on the study of nuclear structure dynamics, we distinguished 8 stages that characterize the period of oocyte growth. At the diplotene stage, T. castaneum oocyte chromosomes conjoin early into a compact karyosphere, but a significant chromatin condensation does not occur. The process of karyosphere formation is accompanied by the development of an extensive extrachromosome capsule surrounding chromatin. The capsule consists of a material of different morphological types. Significant molecular components of the T. castaneum karyosphere capsule are represented by the proteins of nuclear matrix including F-actin and lamin B. Besides the structural proteins, the Sm proteins of small nuclear (sn) RNPs and mature 2,2,7-trimethyl guanosine (TMG) 5'-capped snRNAs are revealed immunocytochemically in the karyosphere capsule. The obtained data can form a basis for further expansion of ideas on the functions of the karyosphere capsule as a specialized extrachromosomal nuclear domain of the oocytes. We believe that the T. castaneum karyosphere capsule plays not only a structural role, but may be involved directly in the processes related to gene expression.

  14. Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

    Directory of Open Access Journals (Sweden)

    Camila de CAMPO

    2016-01-01

    Full Text Available Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4 were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

  15. Capsule of Streptococcus pyogenes is essential for delayed death of mice in a model of streptococcal toxic shock syndrome.

    Science.gov (United States)

    Iida, Ken-ichiro; Seki, Masanori; Saito, Mitsumasa; Kawamura, Yoshiaki; Kajiwara, Hideko; Yoshida, Shin-ichi

    2006-01-01

    We have previously reported a mouse model of severe group A streptococcal infection (Microbiol. Immunol. 45: 777-786, 2001). When we injected Streptococcus pyogenes strains intramuscularly, the mice suffered from acute phase of infection for a few days but recovered from the illness and gained body weight. These mice, however, began to die after 3 weeks of infection, which we called 'delayed death.' Bacterial strains isolated from organs of the dead mice showed thick capsules. We, therefore, constructed a hyaluronic acid capsule gene, hasA, knockout mutant by homologous recombination and the effect of capsule on the death was observed. hasA knockout strain did not cause delayed death, though it caused acute death at high doses of infection. According to this result, the capsule is a critical pathogenic factor for causing the delayed death in our mouse model.

  16. Tag gas capsule with magnetic piercing device

    Science.gov (United States)

    Nelson, Ira V.

    1976-06-22

    An apparatus for introducing a tag (i.e., identifying) gas into a tubular nuclear fuel element. A sealed capsule containing the tag gas is placed in the plenum in the fuel tube between the fuel and the end cap. A ferromagnetic punch having a penetrating point is slidably mounted in the plenum. By external electro-magnets, the punch may be caused to penetrate a thin rupturable end wall of the capsule and release the tag gas into the fuel element. Preferably the punch is slidably mounted within the capsule, which is in turn loaded as a sealed unit into the fuel element.

  17. Parameters measurement of rigid gas permeable contact lens based on optical coherence tomography

    Science.gov (United States)

    Zhu, Dexi; Shen, Meixiao; Li, Yiyu

    2012-10-01

    Spectral domain optical coherence tomography (OCT) was developed in order to measure the geometric parameters of rigid gas permeable (RGP) contact lens. With custom designed OCT system, an ultra-high axial resolution of 3.3 μm in lens was achieved. The OCT image was corrected to eliminate the optical distortion and actual surfaces of lens were shown in contour map. Central thickness, lens diameter, base curve and front surface curvature at optical zone were calculated from the contour map. The results match well with the real values measured by conventional instruments. Our research indicates that OCT can be used to test the RGP lens in a simple and exact way.

  18. Aerococcus viridans var. homari: The presence of capsule and the relationship to virulence in American lobster (Homarus americanus).

    Science.gov (United States)

    Clark, K Fraser; Wadowska, Dorota; Greenwood, Spencer J

    2016-01-01

    The relationship between virulence and encapsulation of Aerococcus viridans var. homari was evaluated by growing virulent (Rabin's) and avirulent (ATCC 10400) strains under varying culture conditions, and during challenge trials. Changes in capsule thickness were monitored using a modified lysine-ruthenium red (LRR) fixation method and transmission electron microscopy. The virulent Rabin's strain possessed a prominent capsule of 0.252 μm±0.061 μm that was diminished by in vitro growth conditions to 0.206 μm±0.076 μm. The ATCC 10400 strain capsule thickness decreased from 0.157 μm±0.043 μm to 0.117 μm±0.043 μm after 10 in vitro passages. The virulent Rabin's strain capsule was significantly thicker than the avirulent ATCC 10400 strain under all growth conditions. Rabin's strain, regardless of pre-challenge growth conditions or dose (high dose 10(7) or low dose 10(2)), was able to kill lobsters in 7 days at 15°C. ATCC 10400 strain, regardless of pre-challenge growth conditions, killed lobster only at high doses (10(7)) with varying median time to death of ∼15 days, while at low doses (10(2)) all lobsters survived and no bacteria were present after 42 days. This work demonstrates the importance of the thickness of the A. viridans capsule to virulence in the American lobster.

  19. Genomic analysis reveals the molecular basis for capsule loss in the group B Streptococcus population.

    Science.gov (United States)

    Rosini, Roberto; Campisi, Edmondo; De Chiara, Matteo; Tettelin, Hervé; Rinaudo, Daniela; Toniolo, Chiara; Metruccio, Matteo; Guidotti, Silvia; Sørensen, Uffe B Skov; Kilian, Mogens; Ramirez, Mario; Janulczyk, Robert; Donati, Claudio; Grandi, Guido; Margarit, Immaculada

    2015-01-01

    The human and bovine bacterial pathogen Streptococcus agalactiae (Group B Streptococcus, GBS) expresses a thick polysaccharide capsule that constitutes a major virulence factor and vaccine target. GBS can be classified into ten distinct serotypes differing in the chemical composition of their capsular polysaccharide. However, non-typeable strains that do not react with anti-capsular sera are frequently isolated from colonized and infected humans and cattle. To gain a comprehensive insight into the molecular basis for the loss of capsule expression in GBS, a collection of well-characterized non-typeable strains was investigated by genome sequencing. Genome based phylogenetic analysis extended to a wide population of sequenced strains confirmed the recently observed high clonality among GBS lineages mainly containing human strains, and revealed a much higher degree of diversity in the bovine population. Remarkably, non-typeable strains were equally distributed in all lineages. A number of distinct mutations in the cps operon were identified that were apparently responsible for inactivation of capsule synthesis. The most frequent genetic alterations were point mutations leading to stop codons in the cps genes, and the main target was found to be cpsE encoding the portal glycosyl transferase of capsule biosynthesis. Complementation of strains carrying missense mutations in cpsE with a wild-type gene restored capsule expression allowing the identification of amino acid residues essential for enzyme activity.

  20. Genomic analysis reveals the molecular basis for capsule loss in the group B Streptococcus population.

    Directory of Open Access Journals (Sweden)

    Roberto Rosini

    Full Text Available The human and bovine bacterial pathogen Streptococcus agalactiae (Group B Streptococcus, GBS expresses a thick polysaccharide capsule that constitutes a major virulence factor and vaccine target. GBS can be classified into ten distinct serotypes differing in the chemical composition of their capsular polysaccharide. However, non-typeable strains that do not react with anti-capsular sera are frequently isolated from colonized and infected humans and cattle. To gain a comprehensive insight into the molecular basis for the loss of capsule expression in GBS, a collection of well-characterized non-typeable strains was investigated by genome sequencing. Genome based phylogenetic analysis extended to a wide population of sequenced strains confirmed the recently observed high clonality among GBS lineages mainly containing human strains, and revealed a much higher degree of diversity in the bovine population. Remarkably, non-typeable strains were equally distributed in all lineages. A number of distinct mutations in the cps operon were identified that were apparently responsible for inactivation of capsule synthesis. The most frequent genetic alterations were point mutations leading to stop codons in the cps genes, and the main target was found to be cpsE encoding the portal glycosyl transferase of capsule biosynthesis. Complementation of strains carrying missense mutations in cpsE with a wild-type gene restored capsule expression allowing the identification of amino acid residues essential for enzyme activity.

  1. Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete

    Directory of Open Access Journals (Sweden)

    Branko Šavija

    2016-12-01

    Full Text Available Polymeric capsules can have an advantage over glass capsules used up to now as proof-of-concept carriers in self-healing concrete. They allow easier processing and afford the possibility to fine tune their mechanical properties. Out of the multiple requirements for capsules used in this context, the capability of rupturing when crossed by a crack in concrete of a typical size is one of the most relevant, as without it no healing agent is released into the crack. This study assessed the fitness of five types of polymeric capsules to fulfill this requirement by using a numerical model to screen the best performing ones and verifying their fitness with experimental methods. Capsules made of a specific type of poly(methyl methacrylate (PMMA were considered fit for the intended application, rupturing at average crack sizes of 69 and 128 μm, respectively for a wall thickness of ~0.3 and ~0.7 mm. Thicker walls were considered unfit, as they ruptured for crack sizes much higher than 100 μm. Other types of PMMA used and polylactic acid were equally unfit for the same reason. There was overall good fitting between model output and experimental results and an elongation at break of 1.5% is recommended regarding polymers for this application.

  2. Magnetic resonance imaging of shoulders with idiopathic adhesive capsulitis: reliability of measures

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre-Colau, Marie-Martine; Fayad, Fouad; Rannou, Francois; Demaille-Wlodyka, Samantha; Mayoux-Benhamou, Marie-Anne; Poiraudeau, Serge; Revel, Michel [Universite Rene Descartes, Department of Physical and Rehabilitation Medicine, Hopital Cochin (AP-HP), Paris (France); Drape, Jean-Luc; Diche, Thierry; Minvielle, Francois [Hopital Cochin (AP-HP), Department of Radiology B, Paris (France); Fermanian, Jacques [Universite Rene Descartes, Department of Biostatistics, Hopital Necker (AP-HP), Paris (France)

    2005-12-01

    The magnetic resonance imaging (MRI) findings in idiopathic adhesive capsulitis (AC) were compared with those of contralateral healthy shoulders and the reliability of measures assessed. Twenty-six consecutive patients (26 AC and 14 healthy shoulders) were prospectively assessed. The main measurements were thickness of the joint capsule and synovial membrane in the axillary recess and rotator interval in T1-weighted spin-echo sequence enhanced with intravenous (IV) gadolinium chelate (Gd-chelate). Reliability was studied by use of the intraclass correlation coefficient (ICC). The mean thickness of the axillary recess on the coronal plane was 9.0{+-}2.2 mm in AC shoulders and 0.4{+-}0.7 mm in healthy shoulders. The mean thickness of the rotator interval on the sagittal plane was 8.4{+-}2.8 in AC shoulders and 0.6{+-}0.8 mm in healthy shoulders. Interobserver reliability was good for the axillary recess, with ICC values of 0.84 for the coronal plane, and good for the rotator interval, with ICC values of 0.80 for the sagittal plane. MRI with IV Gd-chelate injection can show, with acceptable reliability, signal and thickness abnormalities of the shoulder joint capsule and synovial membrane in AC. (orig.)

  3. The Deep Lens Survey

    CERN Document Server

    Wittman, D; Dell'Antonio, I P; Becker, A C; Margoniner, V E; Cohen, J; Norman, D; Loomba, D; Squires, G; Wilson, G; Stubbs, C; Hennawi, J F; Spergel, D N; Boeshaar, P C; Clocchiatti, A; Hamuy, M; Bernstein, G; González, A; Guhathakurta, R; Hu, W; Seljak, U; Zaritsky, D

    2002-01-01

    The Deep Lens Survey (DLS) is a deep BVRz' imaging survey of seven 2x2 degree fields, with all data to be made public. The primary scientific driver is weak gravitational lensing, but the survey is also designed to enable a wide array of other astrophysical investigations. A unique feature of this survey is the search for transient phenomena. We subtract multiple exposures of a field, detect differences, classify, and release transients on the Web within about an hour of observation. Here we summarize the scientific goals of the DLS, field and filter selection, observing techniques and current status, data reduction, data products and release, and transient detections. Finally, we discuss some lessons which might apply to future large surveys such as LSST.

  4. Aspherical Lens Design Using Genetic Algorithm for Reducing Aberrations in Multifocal Artificial Intraocular Lens

    Directory of Open Access Journals (Sweden)

    Chih-Ta Yen

    2015-09-01

    Full Text Available A complex intraocular lens (IOL design involving numerous uncertain variables is proposed. We integrated a genetic algorithm (GA with the commercial optical design software of (CODE V to design a multifocal IOL for the human eye. We mainly used an aspherical lens in the initial state to the crystalline type; therefore, we used the internal human eye model in the software. The proposed optimized algorithm employs a GA method for optimally simulating the focusing function of the human eye; in this method, the thickness and curvature of the anterior lens and the posterior part of the IOL were varied. A comparison of the proposed GA-designed IOLs and those designed using a CODE V built-in optimal algorithm for 550 degrees myopia and 175 degrees astigmatism conditions of the human eye for pupil size 6 mm showed that the proposed IOL design improved the spot size of root mean square (RMS, tangential coma (TCO and modulation transfer function (MTF at a spatial frequency of 30 with a pupil size of 6 mm by approximately 17%, 43% and 35%, respectively. However, the worst performance of spherical aberration (SA was lower than 46%, because the optical design involves a tradeoff between all aberrations. Compared with the traditional CODE V built-in optimal scheme, the proposed IOL design can efficiently improve the critical parameters, namely TCO, RMS, and MTF.

  5. 21 CFR 520.1660b - Oxytetracycline hydrochloride capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride capsules. 520.1660b Section 520.1660b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Oxytetracycline hydrochloride capsules. (a) Specifications. The drug is in capsule form with each capsule...

  6. 21 CFR 520.1803 - Piperazine citrate capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Piperazine citrate capsules. 520.1803 Section 520... capsules. (a) Specifications. Piperazine citrate capsules contain piperazine citrate equivalent to 140 milligrams of piperazine base in each capsule. (b) Sponsor. See No. 021091 in § 510.600(c) of this chapter...

  7. 21 CFR 520.446 - Clindamycin capsules and tablets.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Clindamycin capsules and tablets. 520.446 Section... capsules and tablets. (a) Specifications—(1) Each capsule contains the equivalent of 25, 75, 150, or 300... 150 mg clindamycin as the hydrochloride salt. (3) Each capsule contains the equivalent of 25, 75, or...

  8. 21 CFR 520.390b - Chloramphenicol capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Chloramphenicol capsules. 520.390b Section 520... capsules. (a) Specifications. Each capsule contains 50, 100, 250, or 500 milligrams (mg) chloramphenicol... section. (1) Nos. 000069 and 050057 for capsules containing 50, 100, 250, or 500 mg chloramphenicol. (2...

  9. 21 CFR 520.2605 - Trimeprazine tartrate and prednisolone capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Trimeprazine tartrate and prednisolone capsules... Trimeprazine tartrate and prednisolone capsules. (a) Specifications. Each capsule contains 3.75 milligrams of trimeprazine in sustained released form (as the tartrate) and 1 milligram of prednisolone (capsule no. 1) or 7...

  10. 21 CFR 520.2345a - Tetracycline hydrochloride capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Tetracycline hydrochloride capsules. 520.2345a... Tetracycline hydrochloride capsules. (a) Specifications. Each capsule contains 50, 100, 125, 250, or 500... as in paragraph (c) of this section: (1) No. 000009: 250 mg per capsule. (2) No. 000069: 125, 250, or...

  11. [Safety of promestriene capsule used in postmenopausal atrophic vaginitis].

    Science.gov (United States)

    Sun, Ai-jun; Lin, Shou-qing; Jing, Lian-hong; Wang, Zi-yi; Ye, Jia-lin; Zhang, Ying

    2009-08-01

    To investigate the safety and efficacy of promestriene capsule used in the treatment of postmenopausal atrophic vaginitis. Fifty-three women at age of 45 - 75 years (more than one year history of menopause) diagnosed with postmenopausal atrophic vaginitis were enrolled in self-control study. They all had typicalsymptoms of postmenopausal vaginitis. Promestriene was given by continuous therapy for 20 days, then maintenance therapy for for 8 weeks (1 pill two times per week used). The level of follicle stimulation hormone (FSH) and estradiol (E(2)) in serum was and thickness of endometrium were detected before and after treatment. The routine biochemical test was used as index to monitoring the safety. The vaginal mature index (VMI), the atrophic vaginitis evaluating score and vaginal healthy evaluating score were evaluated for therapeutic effect. In the mean time, adverse effect was recorded. (1) SAFETY: during promestriene treatment, no case with adverse effect was observed. Before treatment, the mean level of FSH and E(2) was (71 +/- 3) U/L and (41 +/- 18) pmol/L, the mean thickness of endometrium was (2.4 +/- 0.9) mm. After treatment, the mean level of FSH and E(2) was (67 +/- 22) U/L and (43 +/- 37) pmol/L, the mean thickness of endometrium was (2.5 +/- 1.3) mm. No significant difference was observed (P > 0.05). (2) Therapeutic effect: VMI were 42 +/- 15 before and 54 +/- 8 after treatment. The atrophic vaginitis evaluating score were 3.4 +/- 1.7 before and 1.5 +/- 1.4 after treatment. Vaginal healthy evaluating score were 7.8 +/- 2.4 before and 12.0 +/- 2.4 after treatment. They all showed significant difference (P vaginal bleeding, 3 cases with breast nodules and 1 case with cervical polyp was observed, however, it was uncertain whether those events were associated with promestriene use. The premestriene capsule was safe and effective in the treatment of postmenopausal atrophic vaginitis.

  12. Size-tunable drug-delivery capsules composed of a magnetic nanoshell

    Science.gov (United States)

    Fuchigami, Teruaki; Kitamoto, Yoshitaka; Namiki, Yoshihisa

    2012-01-01

    Nano-sized FePt capsules with two types of ultrathin shell were fabricated using a template method for use in a nano-scale drug delivery system. One capsule was composed of an inorganic-organic hybrid shell of a water-soluble polymer and FePt nanoparticles, and the other capsule was composed of a network of fused FePt nanoparticles. We demonstrated that FePt nanoparticles selectively accumulated on the polymer molecules adsorbed on the template silica particles, and investigated the morphologies of the particle accumulation by changing the concentration of the polymer solution with which the template particles were treated. Capsular size was reduced from 340 to less than 90 nm by changing the size of the silica template particles, and the shell thickness was controlled by changing the amount of FePt nanoparticles adsorbed on the template particles. The hybrid shell was maintained by the connection of FePt nanoparticles and polymer molecules, and the shell thickness was 10 nm at the maximum. The FePt network shell was fabricated by hydrothermal treatment of the FePt/polymer-modified silica composite particles. The FePt network shell was produced from only the FePt alloy, and the shell thickness was 3 nm. Water-soluble anti-cancer drugs could be loaded into the hollow space of FePt network capsules, and lipid-coated FePt network capsules loaded with anti-cancer drugs showed cellular toxicity. The nano-sized capsular structure and the ultrathin shell suggest applicability as a drug carrier in magnetically guided drug delivery systems. PMID:23507895

  13. Extended formalism for simulating compound refractive lens-based x-ray microscopes

    CERN Document Server

    Simons, Hugh; Poulsen, Henning Friis; Detlefs, Carsten

    2016-01-01

    We present a comprehensive formalism for the simulation and optimisation of CRLs in both condensing and full-field imaging configurations. The approach extends ray transfer matrix analysis to account for x-ray attenuation by the lens material. Closed analytical expressions for critical imaging parameters such as numerical aperture, vignetting, chromatic aberration and focal length are provided for both thin- and thick-lens imaging geometries.

  14. 人工晶体睫状沟缝合固定术临床观察%Clinical observation of intraocular lens ciliary sulcus suture fixation

    Institute of Scientific and Technical Information of China (English)

    沙英虹; 史要武

    2015-01-01

    Objective To investigate clinical application of intraocular lens ciliary sulcus suture fixation.Methods Posterior chamber intraocular lens ciliary sulcus suture fixation was applied for 15 patients with traumatic lens subluxation, posterior capsule injury, posterior capsule injury after senile cataract ultrasonic emulsification, and non-lens after vitrectomy. Their clinical effects were observed.Results Follow-up for 6 months showed postoperative visual acuity in 15 cases were all better than best corrected visual acuity before operation.Conclusion Implement of intraocular lens ciliary sulcus suture fixation is a safe and effective method for non-lens capsule, lens posterior capsular rupture, or wide acantholysis of lens suspensory ligament.%目的 探讨人工晶状体睫状沟缝合固定术的临床应用.方法 对15例外伤性晶体半脱位,后囊破损,老年性白内障超声乳化后囊破损,玻璃体切割术后无晶体眼患者施行后房型人工晶体(IOL)缝线固定术,观察临床效果.结果 随诊6个月,15例患者术后视力均高于术前最佳矫正视力.结论 对无晶体囊膜及晶体后囊膜破裂或晶体悬韧带大范围松解施行人工晶状体睫状沟固定术是一种安全有效的方法.

  15. Comparison of lens oxidative damage induced by vitrectomy and/or hyperoxia in rabbits

    Directory of Open Access Journals (Sweden)

    Hong Yan

    2017-02-01

    Full Text Available AIM: To compare of lens oxidative damage induced by vitrectomy and/or hyperoxia in rabbit. METHODS: Sixteen New Zealand rabbits (2.4-2.5 kg were randomly divided into two groups (Group A, n=12; Group B, n=4. In Group A, the right eyes were treated with vitrectomy and systemic hyperoxia (oxygen concentration: 80%-85%, 1 ATA, 4h/d (Group A-right, and the left eyes were treated with hyperoxia without vitrectomy surgery (Group A-left. Four rabbits in group B (eight eyes were untreated as the controls. Lens transparency was monitored with a slit lamp and recorded before and after vitrectomy. After hyperoxic treatment for 6mo, the eyeballs were removed and the lens cortices (containing the capsules and nuclei were separated for further morphological and biochemical evaluation. RESULTS: Six months after treatments, there were no significant morphological changes in the lenses in any experimental group when observed with a slit lamp. However, the levels of water-soluble proteins and ascorbate, and the activities of catalase and Na+-K+-ATPase were significantly reduced, whereas the levels of malondialdehyde and transforming growth factor β2 (TGF-β2 were significantly elevated, in both the cortices and nuclei of eyes treated with vitrectomy and hyperoxia. The increase in protein-glutathione mixed disulfides and the reduction in water-soluble proteins were more obvious in the lens nuclei. The levels of ascorbate in the vitreous fluid were also reduced after vitrectomy, whereas TGF-β2 increased after vitrectomy and hyperoxia. Systemic hyperoxia exposure increased these effects. CONCLUSION: Removal of the intact vitreous gel with vitrectomy and exposing the lens to increased oxygen from the retina induce lens oxidation and aggregation. Thus, an intact vitreous gel structure may protect the lens from oxidative insult and maintain lens transparency.

  16. Capsule Endoscopy: New Technology, Old Complication ...

    African Journals Online (AJOL)

    Capsule Endoscopy: New Technology, Old Complication. ... A 65-year-old female with a long standing history of anemia and obscure gastrointestinal ... The patient was resuscitated and taken up for an explorative laparotomy where a short ...

  17. Therapeutic Capsule Endoscopy: Opportunities and Challenges

    Directory of Open Access Journals (Sweden)

    Mahdi Rasouli

    2011-01-01

    Full Text Available The increasing demand for non-invasive (or less-invasive monitoring and treatment of medical conditions has attracted both physicians and engineers to work together and investigate new methodologies. Wireless capsule endoscopy is a successful example of such techniques which has become an accepted routine for diagnostic inspection of the gastrointestinal tract. This method offers a non-invasive alternative to traditional endoscopy and provides the opportunity for exploring distal areas of the small intestine which are otherwise not accessible. Despite these advantages, wireless capsule endoscopy is still limited in functionality compared to traditional endoscopy. Wireless capsule endoscopes with advanced functionalities, such as biopsy or drug delivery, are highly desirable. In this article, the current status of wireless capsule endoscopy is reviewed together with some of its possible therapeutic applications as well as the existing challenges.

  18. Capsular Outcomes After Pediatric Cataract Surgery Without Intraocular Lens Implantation: Qualitative Classification and Quantitative Measurement.

    Science.gov (United States)

    Tan, Xuhua; Lin, Haotian; Lin, Zhuoling; Chen, Jingjing; Tang, Xiangchen; Luo, Lixia; Chen, Weirong; Liu, Yizhi

    2016-03-01

    The objective of this study was to investigate capsular outcomes 12 months after pediatric cataract surgery without intraocular lens implantation via qualitative classification and quantitative measurement.This study is a cross-sectional study that was approved by the institutional review board of Zhongshan Ophthalmic Center of Sun Yat-sen University in Guangzhou, China.Digital coaxial retro-illumination photographs of 329 aphakic pediatric eyes were obtained 12 months after pediatric cataract surgery without intraocular lens implantation. Capsule digital coaxial retro-illumination photographs were divided as follows: anterior capsule opening area (ACOA), posterior capsule opening area (PCOA), and posterior capsule opening opacity (PCOO). Capsular outcomes were qualitatively classified into 3 types based on the PCOO: Type I-capsule with mild opacification but no invasion into the capsule opening; Type II-capsule with moderate opacification accompanied by contraction of the ACOA and invasion to the occluding part of the PCOA; and Type III-capsule with severe opacification accompanied by total occlusion of the PCOA. Software was developed to quantitatively measure the ACOA, PCOA, and PCOO using standardized DCRPs. The relationships between the accurate intraoperative anterior and posterior capsulorhexis sizes and the qualitative capsular types were statistically analyzed.The DCRPs of 315 aphakic eyes (95.8%) of 191 children were included. Capsular outcomes were classified into 3 types: Type I-120 eyes (38.1%); Type II-157 eyes (49.8%); Type III-38 eyes (12.1%). The scores of the capsular outcomes were negatively correlated with intraoperative anterior capsulorhexis size (R = -0.572, P < 0.001), but no significant correlation with intraoperative posterior capsulorhexis size (R = -0.16, P = 0.122) was observed. The ACOA significantly decreased from Type I to Type II to Type III, the PCOA increased in size from Type I to Type II, and the PCOO increased

  19. Radiocarbon dating of the human eye lens crystallines reveal proteins without carbon turnover throughout life.

    Directory of Open Access Journals (Sweden)

    Niels Lynnerup

    Full Text Available BACKGROUND: Lens crystallines are special proteins in the eye lens. Because the epithelial basement membrane (lens capsule completely encloses the lens, desquamation of aging cells is impossible, and due to the complete absence of blood vessels or transport of metabolites in this area, there is no subsequent remodelling of these fibers, nor removal of degraded lens fibers. Human tissue ultimately derives its (14C content from the atmospheric carbon dioxide. The (14C content of the lens proteins thus reflects the atmospheric content of (14C when the lens crystallines were formed. Precise radiocarbon dating is made possible by comparing the (14C content of the lens crystallines to the so-called bomb pulse, i.e. a plot of the atmospheric (14C content since the Second World War, when there was a significant increase due to nuclear-bomb testing. Since the change in concentration is significant even on a yearly basis this allows very accurate dating. METHODOLOGY/PRINCIPAL FINDINGS: Our results allow us to conclude that the crystalline formation in the lens nucleus almost entirely takes place around the time of birth, with a very small, and decreasing, continuous formation throughout life. The close relationship may be further expressed as a mathematical model, which takes into account the timing of the crystalline formation. CONCLUSIONS/SIGNIFICANCE: Such a life-long permanence of human tissue has hitherto only been described for dental enamel. In confront to dental enamel it must be held in mind that the eye lens is a soft structure, subjected to almost continuous deformation, due to lens accommodation, yet its most important constituent, the lens crystalline, is never subject to turnover or remodelling once formed. The determination of the (14C content of various tissues may be used to assess turnover rates and degree of substitution (for example for brain cell DNA. Potential targets may be nervous tissues in terms of senile or pre

  20. Systematic Design of edical Capsule Robots

    OpenAIRE

    Beccani, M; Tunc, H; Taddese, AZ; Susilo, E; Volgiesi, P; Ledeczi, A; Valdastri, P

    2015-01-01

    Medical capsule robots that navigate inside the body as diagnostic and interventional tools are an emerging and challenging research area within medical CPSs. These robots must provide locomotion, sensing, actuation, and communication within severe size, power, and computational constraints. This paper presents the first effort for an open architecture, platform design, software infrastructure, and a supporting modular design environment for medical capsule robots to further this research area.

  1. Influence of bone morphogenetic protein type IA receptor conditional knockout in lens on expression of bone morphogenetic protein 4 in lens

    Institute of Scientific and Technical Information of China (English)

    Qi; Zhao; Jiang-Yue; Zhao; Jin-Song; Zhang

    2015-01-01

    AIM: To investigate the influence of bone morphogenetic protein type IA receptor [BMPR-IA(ALK3)] conditional knockout in lens on expression of bone morphogenetic protein 4(BMP4) in lens during the development of the vertebrate eye.METHODS: Cre-positive mice were mated with Crenegative mice to generate 50% Cre-positive(conditional knockout, CKO) 4 embryos, 8 eyes and 50% Cre-negative offspring(wild type, WT) 4 embryos, 8 eyes. The embryos were fixed in 4% paraformaldehyde, embedded in paraffin, and sectioned to a thickness of 4 μm.Removal of paraffin wax and dehydrating for sections,and then the procedure of in situ hybridization was processed, BMP4 MK1784-m(BOSTER) was used, and observed the expression of BMP4 in the lens in experimental group and control group. We selected SPSS11.0 software for statistical analysis, P<0.05 showed that the difference was statistically significant.· RESULTS: Four embryos of each genotype were examined, totally we had 8 embryos, 16 eyes. We got the uniform outcomes in all the embryos. We found ALK3 was required during lens growing, but was not essential for the formation of lens. We observed that the expression of BMP4 in the lens was significantly reduced in all 8 ALK3 CKO lens, BMP4 expression was normal in all the 8 WT lens, P <0.01. This phenomenon became increasingly visible in accordance with embryo development. The most apparent alteration was present at stage E15.5.CONCLUSION: ALK3 is essential for lens growth. The influence of ALK3 on the expression of BMP4 is present during the development of mice lens.

  2. Transferring Lens Prescriptions Between Lens-Design Programs

    Science.gov (United States)

    Stacy, John E.; Wooley, Laura; Carlin, Brian

    1989-01-01

    Optical Lens Prescription Data Formatter computer program enables user to transfer complicated lens prescriptions quickly and easily from one major optical-design program to another and back again. One can take advantage of inherent strength of either program. Programs are ACCOS V from Scientific Calculations, Inc., of Fishers, NY, and CODE V from Optical Research Associates of Pasadena, CA. VAX version written in FORTRAN.

  3. Dynamics of nonspherical compound capsules in simple shear flow

    Science.gov (United States)

    Luo, Zheng Yuan; Bai, Bo Feng

    2016-10-01

    The dynamics of an initially ellipsoidal compound capsule in a simple shear flow is investigated numerically using a three-dimensional front-tracking finite-difference model. Membrane bending resistance is included based on Helfrich's energy function besides the resistances against shear deformation and area dilatation governed by the constitutive law of Skalak et al. In this paper, we focus specifically on how the presence of a spherical inner capsule and its size affects the characteristics and transition of various dynamical states of nonspherical compound capsules (i.e., the outer capsule). Significant differences in the dynamical characteristics are observed between compound capsules and homogeneous capsules in both qualitative and quantitative terms. We find the transition from swinging to tumbling can occur at vanishing viscosity mismatch through increasing the inner capsule size alone to a critical value regardless of the initial shape of the nonspherical compound capsule (i.e., prolate or oblate). Besides, for compound capsules with viscosity mismatch, the critical viscosity ratio for the swinging-to-tumbling transition remarkably decreases by increasing the inner capsule size. It is thus concluded that the inner capsule size is a key governing parameter of compound capsule dynamics apart from the capillary number, aspect ratio, and viscosity ratio that have been long identified for homogeneous capsules. Further, we discuss the mechanisms underlying the effects of the inner capsule on the compound capsule dynamics from the viewpoint of the effective viscosity of internal fluid and find that the effects of the inner capsule on compound capsule dynamics are qualitatively similar to that of increasing the internal viscosity on homogeneous capsule dynamics. However, in quantitative terms, the compound capsule cannot be viewed as a homogeneous capsule with higher viscosity as obvious inhomogeneity in fluid stress distribution is induced by the inner membrane.

  4. Estimating transient freshwater lens dynamics for atoll islands of the Maldives

    Science.gov (United States)

    Bailey, Ryan T.; Khalil, Abedalrazq; Chatikavanij, Vansa

    2014-07-01

    The water resources of the atolls of the Republic of the Maldives are under continual threat from climatic and anthropogenic stresses, such as changing rainfall patterns, sea-level rise, and contamination from human activities and climatic events. Groundwater, a historically important resource of the island communities of the Maldives, is particularly affected due to the fragile nature of the freshwater lens on small atoll islands. In this study the dynamics of the freshwater lens are simulated during an extended (1998-2011) time period to determine the fluctuation of lens thickness of islands of the Maldives in response to annual and long-term changes in rainfall. Particularly, maximum and minimum lens thickness during the simulation period are assessed, as well as the occurrence of general trends, either decreasing or increasing, in lens thickness. Simulations are performed for a variety of island sizes, corresponding to the range of sizes of the islands of the Maldives, and for the various climatic regions of the Maldives. Results indicate that many of the atoll islands are expected to have a measurable freshwater lens during the majority of a long-term climatic period, although significant decreases in thickness can occur during the months of the dry season, with complete depletion occurring for small islands. Of particular note is the observation of a general decrease in lens thickness, approximately 2-4 cm/yr, over the 14-year period for the northern regions of the Maldives. If continued at current rates, these trends can have a significant impact on groundwater resources for the Maldives. Results imply that fresh groundwater, if properly protected from land surface-derived contamination and over-pumping and associated salinization, can be a valuable source of water for the Maldives, particularly for the larger islands. Overall, results provide water resource managers and government officials with valuable data for consideration in water security measures.

  5. Excessive hydrogen peroxide enhances the attachment of amyloid β1-42 in the lens epithelium of UPL rats, a hereditary model for cataracts.

    Science.gov (United States)

    Nagai, Noriaki; Ito, Yoshimasa

    2014-01-06

    Several studies have reported that hydrogen peroxide (H2O2) is related to the toxicity of amyloid β (Aβ), and that the accumulation of Aβ in the lenses of humans causes lens opacification. In this study, we investigate the accumulation of Aβ1-42 in the lenses of UPL rats, which then leads to lens opacification. In addition, we demonstrate the effect of disulfiram eye drops (DSF), a potent radical scavenger, on Aβ1-42 accumulation in the lenses of UPL rats. The H2O2 levels in 46- to 60-day-old UPL rat lenses are significantly higher than in normal rats, and the Aβ1-42 levels in 53- and 60-day-old UPL rats are also increased only in lens epithelium containing capsules (capsule-epithelium), not in the lens cortex and nucleus. However, no increases in amyloid precursor protein (APP), β- or γ-secretase mRNA were observed in lenses of the corresponding ages. It has been thought that Aβ1-42 that accumulates in the lenses of UPL rats is actually produced in another tissue containing neuronal cells, such as brain or retina. Aβ1-42 levels in the brain and retina rise with aging, and the levels of APP, β- and γ-secretase mRNA in the retinas of 53-day-old UPL rats with opaque lenses are significantly higher than in 25-day-old UPL rats with transparent lenses. In contrast to the results in retinas, the levels of APP, β- and γ-secretase mRNA in the brains of 25- and 53-day-old UPL rats are similar. On the other hand, in an in vitro study, Aβ1-42 attachment in the lens capsule-epithelium of UPL rats was found to increase in H2O2. In addition, in an in vivo study, the inhibition of H2O2 by DSF was found to attenuate the increase in Aβ1-42 in the lens capsule-epithelium of 60-day-old UPL rats. Taken together, we hypothesize that excessive H2O2 in the lens enhances the attachment of Aβ1-42 in the lens capsule-epithelium of UPL rats, and that the instillation of DSF has the ability to attenuate the attachment of Aβ1-42 by inhibiting H2O2 production in lens. These

  6. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Willson, Reg G.; Goetz, Walter

    2012-09-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ˜5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ˜2.1 cm to infinity. At the minimum working distance, image pixel scale is ˜14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI's resolution is comparable at ˜30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  7. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Wilson, Reg G.; Goetz, Walter

    2012-01-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ?5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ?2.1 cm to infinity. At the minimum working distance, image pixel scale is ?14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI?s resolution is comparable at ?30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  8. Crystal diffraction lens for medical imaging

    Science.gov (United States)

    Smither, Robert K.; Roa, Dante E.

    2000-04-01

    A crystal diffraction lens for focusing energetic gamma rays has been developed at Argonne National Laboratory for use in medical imaging of radioactivity in the human body. A common method for locating possible cancerous growths in the body is to inject radioactivity into the blood stream of the patient and then look for any concentration of radioactivity that could be associated with the fast growing cancer cells. Often there are borderline indications of possible cancers that could be due to statistical functions in the measured counting rates. In order to determine if these indications are false or real, one must resort to surgical means and take tissue samples in the suspect area. We are developing a system of crystal diffraction lenses that will be incorporated into a 3- D imaging system with better sensitivity (factors of 10 to 20) and better spatial resolution (a few mm in both vertical and horizontal directions) than most systems presently in use. The use of this new imaging system will allow one to eliminate 90 percent of the false indications and both locate and determine the size of the cancer with mm precision. The lens consists of 900 single crystals of copper, 4 mm X 4 mm on a side and 2 - 4 mm thick, mounted in 13 concentric rings.

  9. High efficiency nanocomposite sorbents for CO2 capture based on amine-functionalized mesoporous capsules

    KAUST Repository

    Qi, Genggeng

    2011-01-01

    A novel high efficiency nanocomposite sorbent for CO2 capture has been developed based on oligomeric amine (polyethylenimine, PEI, and tetraethylenepentamine, TEPA) functionalized mesoporous silica capsules. The newly synthesized sorbents exhibit extraordinary capture capacity up to 7.9 mmol g-1 under simulated flue gas conditions (pre-humidified 10% CO 2). The CO2 capture kinetics were found to be fast and reached 90% of the total capacities within the first few minutes. The effects of the mesoporous capsule features such as particle size and shell thickness on CO2 capture capacity were investigated. Larger particle size, higher interior void volume and thinner mesoporous shell thickness all improved the CO2 capacity of the sorbents. PEI impregnated sorbents showed good reversibility and stability during cyclic adsorption-regeneration tests (50 cycles). © 2011 The Royal Society of Chemistry.

  10. Connexin hemichannels in the lens

    Directory of Open Access Journals (Sweden)

    Eric C Beyer

    2014-02-01

    Full Text Available The normal function and survival of cells in the avascular lens is facilitated by intercellular communication through an extensive network of gap junctions formed predominantly by three connexins (Cx43, Cx46, and Cx50. In expression systems, these connexins can all induce hemi-channel currents, but other lens proteins (e.g., pannexin1 can also induce similar currents. Hemichannel currents have been detected in isolated lens fiber cells. These hemichannels may make significant contributions to normal lens physiology and pathophysiology. Studies of some connexin mutants linked to congenital cataracts have implicated hemichannels with aberrant voltage-dependent gating or modulation by divalent cations in disease pathogenesis. Hemichannels may also contribute to age- and disease-related cataracts.

  11. Gravitational lens surveys with LOFAR

    CERN Document Server

    Wucknitz, O

    2008-01-01

    Deep surveys planned as a Key Science Project of LOFAR provide completely new opportunities for gravitational lens searches. For the first time do large-scale surveys reach the resolution required for a direct selection of lens candidates using morphological criteria. We briefly describe the strategies that we will use to exploit this potential. The long baselines of an international E-LOFAR are essential for this project.

  12. Ascorbate in the ocular lens

    OpenAIRE

    Mody, Vino C. Jr

    2006-01-01

    Purpose: First, we intended to establish a method for sample preparation for measurement of ascorbate in whole rat and guinea pig lenses utilizing ultrafiltration and high performance liquid chromatography with ultraviolet radiation detection. Then, we aimed to investigate whether, in the albino rat, lens ascorbate concentration depends on solid dietary intake. Finally, we investigated if, in the pigmented guinea pig, lens ascorbate concentration may be elevated with drinkin...

  13. Phakic Intraocular lens- a review

    OpenAIRE

    Cruz, Francisco Miguel

    2015-01-01

    Introduction: Intraocular refractive procedures with the implantation of a Phakic Intraocular lens have become a safe efficient and predictable alternative for treating high ametropias when the use of corneal photoablative procedures is not possible. The implantation of Phakic intraocular lens preservs the accomodative function,is a reversable refractive procedure, with minimal induction of higher order aberrations compaed with corneal photoablative procedures. Methods: An analytical review o...

  14. Analysis of intraocular lens surface adhesiveness by atomic force microscopy.

    Science.gov (United States)

    Lombardo, Marco; Carbone, Giovanni; Lombardo, Giuseppe; De Santo, Maria P; Barberi, Riccardo

    2009-07-01

    To analyze intraocular lens (IOL) optic surface adhesiveness using atomic force microscopy (AFM). LiCryL Laboratory, University of Calabria, Rende, Italy. The surface adhesive properties of poly(methyl methacrylate) (PMMA), silicone, hydrophilic acrylic, and hydrophobic acrylic IOLs were evaluated by AFM. Analysis was performed at room temperature (21 degrees C) in a liquid environment using the force-versus-distance mode of a commercial instrument (NanoScope III). Measurements were acquired with rectangular silicon cantilevers of a nominal elastic constant of 10 Newton/m. The nominal value of the tip's radius of curvature was 1 mum, and the scanning speed during the acquisitions ranged from 10 to 400 nm/s. The adhesion force measurements showed different characteristics for the various types of IOLs (Pdevelopment and the interface interactions between the IOL and capsule, the results in this study may bolster the theory of manufacturing more-adhesive materials to prevent PCO.

  15. A course in lens design

    CERN Document Server

    Velzel, Chris

    2014-01-01

    A Course in Lens Design is an instruction in the design of image-forming optical systems. It teaches how a satisfactory design can be obtained in a straightforward way. Theory is limited to a minimum, and used to support the practical design work. The book introduces geometrical optics, optical instruments and aberrations. It gives a description of the process of lens design and of the strategies used in this process. Half of its content is devoted to the design of sixteen types of lenses, described in detail from beginning to end. This book is different from most other books on lens design because it stresses the importance of the initial phases of the design process: (paraxial) lay-out and (thin-lens) pre-design. The argument for this change of accent is that in these phases much information can be obtained about the properties of the lens to be designed. This information can be used in later phases of the design. This makes A Course in Lens Design a useful self-study book, and a suitable basis for an intro...

  16. Posterior capsule opacification and neovascularization treated with intravitreal bevacizumab and Nd:YAG capsulotomy

    Directory of Open Access Journals (Sweden)

    Grimelda Yuriana Sánchez-Castro

    2008-10-01

    Full Text Available Grimelda Yuriana Sánchez-Castro1, Alejandra Hitos-Fájer1, Erick Mendoza-Schuster1, Raul Velez-Montoya2, Cecilio Francisco Velasco-Barona11Asociación para Evitar la Ceguera en México. Hospital “Dr. Luis Sánchez Bulnes”, México, D.F. Ophthalmology Department – Anterior Segment; 2Asociación para Evitar la Ceguera en México. Hospital “Dr. Luis Sánchez Bulnes”, México, D.F. Ophthalmology Department – Retina departmentAbstract: We reported a 75-year-old diabetic man, who developed opacification and neovascularization of the posterior capsule after extracapsular cataract extraction and posterior chamber intraocular lens implantation. The patient was treated with two injections of 2.5 mg of intravitreal bevacizumab. The treatment produced an important regression of the posterior capsular new vessels, allowing us to perform a successful Nd:YAG capsulotomy, clearing the visual axis and improving the visualization of the posterior pole. Even though, best corrected visual acuity was 20/200 due to diabetic macular edema.Keywords: posterior capsule opacification, posterior capsule neovascularization, cataract surgery, postoperative complications, intravitreal bevacizumab

  17. Under-air staining of the anterior capsule using Trypan blue with a 30 G needle

    Directory of Open Access Journals (Sweden)

    Giammaria D

    2013-01-01

    Full Text Available Daniele Giammaria,1 Michele Giannotti,2 Angelo Scopelliti,1 Giacomo Pellegrini,1 Bruno Giannotti11Azienda Ospedaliera Ospedali Riuniti Marche Nord, Fano, Italy; 2Catholic University of Rome, Rome, ItalyAbstract: The original technique of staining the anterior capsule of the lens with Trypan blue involves the injection of an air bubble in the anterior chamber. A drawback of this technique is the possible instability of the anterior chamber caused by the sudden exit of air when the dye is injected with the cannula through the side-port incision. Other staining techniques that use viscoelastic substances to increase the stability of the anterior chamber and to dose the injected dye have been described. The authors present an under-air staining technique of the anterior capsule using one drop of Trypan blue injected with a 30 G needle through the peripheral cornea. This procedure prevents the air bubble from escaping the anterior chamber and allows fast and selective staining of the capsule.Keywords: Trypan blue, staining technique, dye, cataract surgery, capsulorhexis

  18. Capsule endoscopy in neoplastic diseases

    Institute of Scientific and Technical Information of China (English)

    Marco Pennazio; Emanuele Rondonotti; Roberto de Franchis

    2008-01-01

    Until recently,diagnosis and management of small-bowel tumors were delayed by the difficulty of access to the small bowel and the poor diagnostic capabilities of the available diagnostic techniques.An array of new methods has recently been developed,increasing the possibility of detecting these tumors at an earlier stage.Capsule endoscopy (CE) appears to be an ideal tool to recognize the presence of neoplastic lesions along this organ,since it is non-invasive and enables the entire small bowel to be visualized.Highquality images of the small-bowel mucosa may be captured and small and fiat lesions recognized,without exposure to radiation.Recent studies on a large population of patients undergoing CE have reported small-bowel tumor frequency only slightly above that reported in previous surgical series (range,1.6%-2.4%)and have also confirmed that the main clinical indication to CE in patients with small-bowel tumors is obscure gastrointestinal (GI) bleeding.The majority of tumors identified by CE are malignant;many were unsuspected and not found by other methods.However,it remains difficult to identify pathology and tumor type based on the lesion's endoscopic appearance.Despite its limitations,CE provides crucial information leading in most cases to changes in subsequent patient management.Whether the use of CE in combination with other new diagnostic (MRI or multidetector CT enterography) and therapeutic (Push-and-pull enteroscopy) techniques will lead to earlier diagnosis and treatment of these neoplasms,ultimately resulting in a survival advantage and in cost savings,remains to be determined through carefully-designed studies.

  19. Effect of four different intraocular lenses on posterior capsule opacification

    Institute of Scientific and Technical Information of China (English)

    Rahmi; Duman; Fatih; Karel; Pelin; ?zyol; Can; Ates

    2015-01-01

    AIM: To evaluate the impact of 4 different intraocular lenses(IOLs) on posterior capsule opacification(PCO) by comparing the neodymium: yttrium-aluminum-garnet(Nd:YAG) laser capsulotomy rates.METHODS: This retrospective study included 4970 eyes of 4013 cataract patients who underwent phacoemulsification and IOL implantation between January 2000 and January 2008 by the same surgeon at one clinic. Four different IOLs were assessed. The outcome parameter was the incidence of Nd:YAG laser posterior capsulotomies.· RESULTS: An Nd:YAG laser posterior capsulotomy was performed in 153(3.07%) of the 4970 eyes. The mean follow-up time was 84 mo for all of the IOL groups. The percentage of eyes developing PCO was significantly greater for the acrylic hydrophilic IOLs than for the hydrophobic IOLs, although eyes with acrylic hydrophilic IOLs did not require Nd:YAG laser capsulotomy as soon as eyes with acrylic hydrophobic IOLs. There was no difference between the long-term PCO rates when 1-and 3-piece acrylic hydrophobic IOLs were compared or when IOLs made of the same material but with different haptic angles were compared.· CONCLUSION: In this study, eyes with acrylic hydrophilic IOLs were more likely to develop PCO than those with acrylic hydrophobic IOLs. The lens design(1-piece versus 3-piece and varying haptic angles) did not affect the PCO rate.

  20. 3D Printed Programmable Release Capsules.

    Science.gov (United States)

    Gupta, Maneesh K; Meng, Fanben; Johnson, Blake N; Kong, Yong Lin; Tian, Limei; Yeh, Yao-Wen; Masters, Nina; Singamaneni, Srikanth; McAlpine, Michael C

    2015-08-12

    The development of methods for achieving precise spatiotemporal control over chemical and biomolecular gradients could enable significant advances in areas such as synthetic tissue engineering, biotic-abiotic interfaces, and bionanotechnology. Living organisms guide tissue development through highly orchestrated gradients of biomolecules that direct cell growth, migration, and differentiation. While numerous methods have been developed to manipulate and implement biomolecular gradients, integrating gradients into multiplexed, three-dimensional (3D) matrices remains a critical challenge. Here we present a method to 3D print stimuli-responsive core/shell capsules for programmable release of multiplexed gradients within hydrogel matrices. These capsules are composed of an aqueous core, which can be formulated to maintain the activity of payload biomolecules, and a poly(lactic-co-glycolic) acid (PLGA, an FDA approved polymer) shell. Importantly, the shell can be loaded with plasmonic gold nanorods (AuNRs), which permits selective rupturing of the capsule when irradiated with a laser wavelength specifically determined by the lengths of the nanorods. This precise control over space, time, and selectivity allows for the ability to pattern 2D and 3D multiplexed arrays of enzyme-loaded capsules along with tunable laser-triggered rupture and release of active enzymes into a hydrogel ambient. The advantages of this 3D printing-based method include (1) highly monodisperse capsules, (2) efficient encapsulation of biomolecular payloads, (3) precise spatial patterning of capsule arrays, (4) "on the fly" programmable reconfiguration of gradients, and (5) versatility for incorporation in hierarchical architectures. Indeed, 3D printing of programmable release capsules may represent a powerful new tool to enable spatiotemporal control over biomolecular gradients.

  1. Refractive power and biometric properties of the nonhuman primate isolated crystalline lens.

    Science.gov (United States)

    Borja, David; Manns, Fabrice; Ho, Arthur; Ziebarth, Noel M; Acosta, Ana Carolina; Arrieta-Quintera, Esdras; Augusteyn, Robert C; Parel, Jean-Marie

    2010-04-01

    Purpose. To characterize the age dependence of shape, refractive power, and refractive index of isolated lenses from nonhuman primates. Methods. Measurements were performed on ex vivo lenses from cynomolgus monkeys (cyno: n = 120; age, 2.7-14.3 years), rhesus monkeys (n = 61; age, 0.7-13.3 years), and hamadryas baboons (baboon: n = 16; age, 1.7-27.3 years). Lens thickness, diameter, and surface curvatures were measured with an optical comparator. Lens refractive power was measured with a custom optical system based on the Scheiner principle. The refractive contributions of the gradient, the surfaces, and the equivalent refractive index were calculated with optical ray-tracing software. The age dependence of the optical and biometric parameters was assessed. Results. Over the measured age range isolated lens thickness decreased (baboon: -0.04, cyno: -0.05, and rhesus: -0.06 mm/y) and equatorial diameter increased (logarithmically for the baboon and rhesus, and linearly for cyno: 0.07 mm/y). The isolated lens surfaces flattened and the corresponding refractive power from the surfaces decreased with age (-0.33, -0.48, and -0.68 D/y). The isolated lens equivalent refractive index decreased (only significant for the baboon, -0.001 D/y), and as a result the total isolated lens refractive power decreased with age (baboon: -1.26, cyno: -0.97, and rhesus: -1.76 D/y). Conclusions. The age-dependent trends in the optical and biometric properties, growth, and aging, of nonhuman primate lenses are similar to those of the pre-presbyopic human lens. As the lens ages, the decrease in refractive contributions from the gradient refractive index causes a rapid age-dependent decrease in maximally accommodated lens refractive power.

  2. Analysis of the conditions of experiments on the compression of capsules with a foam absorber at Iskra V facility

    Energy Technology Data Exchange (ETDEWEB)

    Demchenko, N N; Doskoch, I Y; Gus' kov, S Y; Rozanov, V B; Stepanov, R V; Yakhin, R A [P. N. Lebedev Physical Institute of RAS, Moscow (Russian Federation); Garanin, S G; Suslov, N A; Zhidkov, N V [Russian Federation Nuclear Center - VNIIEF, Sarov (Russian Federation); Gatin, A A; Tishkin, V F; Zmitrenko, N V [Institute of Mathematical Modelling of RAS, Moscow (Russian Federation)], E-mail: rozanov@sci.lebedev.ru

    2008-05-15

    The compression conditions are analyzed and the capsules are discussed for the energy of {approx}2 kJ and pulse duration of {approx}0.5 ns at the second harmonic of an iodine laser ({lambda} = 0.66 {mu}m) under irradiation by a small number of beams at Iskra V facility (the facility has 12 beams, which are focused in a certain way onto the capsule). The authors consider different capsules filled with DT gas: the glass capsules (the inner radius is 260 {mu}m; the thickness, 1.2-1.3 {mu}m; the aspect ratio A = 200) experimentally examined with Iskra V; the capsules made of polystyrene (R = 140-170 {mu}m; {delta} = 5-10 {mu}m; A = 14-34), and the capsules made of polystyrene and covered by a foam absorber (R = 140-170 {mu}m; {delta} = 5-10 {mu}m; A = 14-34, foam absorber {delta} = 150 {mu}m) - 'Laser Greenhouse'.

  3. Histological evaluation of capsules formed by silicon implants coated with polyurethane foam and with a textured surface in rats.

    Science.gov (United States)

    Silva, Eduardo Nascimento; Ribas-Filho, Jurandir Marcondes; Czeczko, Nicolau Gregori; Pachnicki, Jan Pawel Andrade; Netto, Mário Rodrigues Montemor; Lipinski, Leandro Cavalcante; Noronha, Lucia de; Colman, Joelmir; Zeni, João Otavio; Carvalho, Caroline Aragão de

    2016-12-01

    To assess the capsules formed by silicone implants coated with polyurethane foam and with a textured surface. Sixty-four Wistar albinus rats were divided into two groups of 32 each using polyurethane foam and textured surface. The capsules around the implants were analyzed for 30, 50, 70 and 90 days. Were analyzed the following parameters: foreign body reaction, granulation tissue, presence of myofibroblasts, neoangiogenesis, presence of synovial metaplasia, capsular thickness, total area and collagen percentage of type I and III, in capsules formed around silicone implants in both groups. The foreign body reaction was only present in the four polyurethane subgroups. The formation of granulation tissue and the presence of myofibroblasts were higher in the four polyurethane subgroups. Regarding to neoangiogenesis and synovial metaplasia, there was no statistical difference between the groups. Polyurethane group presented (all subgroups) a greater capsule thickness, a smaller total area and collagen percentage of type I and a higher percentage area of type III, with statistical difference. The use of polyurethane-coated implants should be stimulated by the long-term results in a more stable capsule and a lower incidence of capsular contracture, despite developing a more intense and delayed inflammatory reaction in relation to implants with textured surface.

  4. Multilayer Capsules of Bovine Serum Albumin and Tannic Acid for Controlled Release by Enzymatic Degradation.

    Science.gov (United States)

    Lomova, Maria V; Brichkina, Anna I; Kiryukhin, Maxim V; Vasina, Elena N; Pavlov, Anton M; Gorin, Dmitry A; Sukhorukov, Gleb B; Antipina, Maria N

    2015-06-10

    With the purpose to replace expensive and significantly cytotoxic positively charged polypeptides in biodegradable capsules formed via Layer-by-Layer (LbL) assembly, multilayers of bovine serum albumin (BSA) and tannic acid (TA) are obtained and employed for encapsulation and release of model drugs with different solubility in water: hydrophilic-tetramethylrhodamine-isothiocyanate-labeled BSA (TRITC-BSA) and hydrophobic 3,4,9,10-tetra-(hectoxy-carbonyl)-perylene (THCP). Hydrogen bonding is proposed to be predominant within thus formed BSA/TA films. The TRITC-BSA-loaded capsules comprising 6 bilayers of the protein and polyphenol are benchmarked against the shells composed of dextran sulfate (DS) and poly-l-arginine (PARG) on degradability by two proteolytic enzymes with different cleavage site specificity (i.e., α-chymotrypsin and trypsin) and toxicity for murine RAW264.7 macrophage cells. Capsules of both types possess low cytotoxicity taken at concentrations equal or below 50 capsules per cell, and evident susceptibility to α-chymotrypsin resulted in release of TRITC-BSA. While the BSA/TA-based capsules clearly display resistance to treatment with trypsin, the assemblies of DS/PARG extensively degrade. Successful encapsulation of THCP in the TRITC-BSA/TA/BSA multilayer is confirmed, and the release of the model drug is observed in response to treatment with α-chymotrypsin. The thickness, surface morphology, and enzyme-catalyzed degradation process of the BSA/TA-based films are investigated on a planar multilayer comprising 40 bilayers of the protein and polyphenol deposited on a silicon wafer. The developed BSA/TA-based capsules with a protease-specific degradation mechanism are proposed to find applications in personal care, pharmacology, and the development of drug delivery systems including those intravenous injectable and having site-specific release capability.

  5. The 2010 IODC lens design problem: the green lens

    Science.gov (United States)

    Juergens, Richard C.

    2010-08-01

    The lens design problem for the 2010 IODC is to design a 100 mm focal length lens in which every optical surface has the same radius of curvature, positive or negative, or is plano. The lens is used monochromatically at 532 nm and is made of only Schott N-BK7 glass. The goal of the problem is to maximize the product of the semi-field of view and the entrance pupil diameter while holding the distortion to within +/-5% and the RMS wavefront error to <= 0.07 wave within the field of view. There were 37 entries from eight different countries. Four different commercial lens design programs were used, along with two custom, in-house programs. The number of lens elements in the entries ranged from 3 to 64. The overall length of the lenses varied from 105 mm to 3.6 km. The winning entry had an entrance pupil diameter of 81.3 mm and a semi-field of view of 43.5° for a merit function product of 3537.

  6. Scaling effects in spiral capsule robots.

    Science.gov (United States)

    Liang, Liang; Hu, Rong; Chen, Bai; Tang, Yong; Xu, Yan

    2017-04-01

    Spiral capsule robots can be applied to human gastrointestinal tracts and blood vessels. Because of significant variations in the sizes of the inner diameters of the intestines as well as blood vessels, this research has been unable to meet the requirements for medical applications. By applying the fluid dynamic equations, using the computational fluid dynamics method, to a robot axial length ranging from 10(-5) to 10(-2) m, the operational performance indicators (axial driving force, load torque, and maximum fluid pressure on the pipe wall) of the spiral capsule robot and the fluid turbulent intensity around the robot spiral surfaces was numerically calculated in a straight rigid pipe filled with fluid. The reasonableness and validity of the calculation method adopted in this study were verified by the consistency of the calculated values by the computational fluid dynamics method and the experimental values from a relevant literature. The results show that the greater the fluid turbulent intensity, the greater the impact of the fluid turbulence on the driving performance of the spiral capsule robot and the higher the energy consumption of the robot. For the same level of size of the robot, the axial driving force, the load torque, and the maximum fluid pressure on the pipe wall of the outer spiral robot were larger than those of the inner spiral robot. For different requirements of the operating environment, we can choose a certain kind of spiral capsule robot. This study provides a theoretical foundation for spiral capsule robots.

  7. Lubricin in human breast tissue expander capsules.

    Science.gov (United States)

    Cheriyan, Thomas; Guo, Lifei; Orgill, Dennis P; Padera, Robert F; Schmid, Thomas M; Spector, Myron

    2012-10-01

    Capsular contraction is the most common complication of breast reconstruction surgery. While presence of the contractile protein alpha smooth muscle actin (α-SMA) is considered among the causes of capsular contraction, the exact etiology and pathophysiology is not fully understood. The objective of this study was to investigate the possible role of lubricin in capsular formation and contraction by determining the presence and distribution of the lubricating protein lubricin in human breast tissue expander capsules. Related aims were to evaluate select histopathologic features of the capsules, and the percentage of cells expressing α-SMA, which reflects the myofibroblast phenotype. Capsules from tissue expanders were obtained from eight patients. Lubricin, at the tissue-implant interface, in the extracellular matrix, and in cells, and α-SMA-containing cells were evaluated immunohistochemically. The notable finding was that lubricin was identified in all tissue expander capsules: as a discrete layer at the tissue-implant interface, extracellular, and intracellular. There was a greater amount of lubricin in the extracellular matrix in the intimal-subintimal zone when compared with the tissue away from the implant. Varying degrees of synovial metaplasia were seen at the tissue-implant interface. α-SMA-containing cells were also seen in all but one patient. The findings might help us better understand factors involved in capsule formation.

  8. Capsular bag opacification with a new accommodating intraocular lens.

    Science.gov (United States)

    Floyd, Anne M; Werner, Liliana; Liu, Erica; Stallings, Shannon; Ollerton, Andrew; Leishman, Lisa; Bodnar, Zachary; Morris, Caleb; Mamalis, Nick

    2013-09-01

    To evaluate the biocompatibility and capsular bag opacification of an accommodating intraocular lens (IOL) containing large haptic elements that separate the anterior and posterior capsules. John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA. Experimental study. Bilateral phacoemulsification with IOL implantation was performed in 6 New Zealand rabbits. Each animal received a study (accommodating) IOL and a control (1-piece hydrophobic acrylic) IOL. Eyes were examined at the slitlamp from 1 day through 6 weeks postoperatively. The globes were then enucleated and evaluated grossly. Capsular bag opacification was scored from the posterior aspect (Miyake-Apple view). The eyes were then processed for complete histopathologic evaluation. At 6 weeks, the mean posterior capsule opacification (PCO) clinical score was 0.5 ± 0.3 (SD) in the study group and 3.0 ± 0.9 in the control group (P=.001, 2-tail paired t test). Anterior capsule opacification was practically absent in the study group and mild in the control group. Miyake-Apple posterior view showed a mean central PCO score of 0 ± 0 in the study group and 3.0 ± 1.1 in the control group (P=.001), peripheral PCO score of 0.7 ± 0.4 and 3.5 ± 0.8 (P=.0006), respectively, and Soemmerring ring score of 2.3 ± 0.8 and 7.0 ± 2.8 (P=.01), respectively. Histopathology showed no signs of toxicity in any eye. The study IOL maintained an expanded capsular bag secondary to the large size of the haptic elements, which appears to prevent capsular bag opacification. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  9. Liquid-crystal intraocular adaptive lens with wireless control.

    Science.gov (United States)

    Simonov, Aleksey N; Vdovin, Gleb; Loktev, Mikhail

    2007-06-11

    We present a prototype of an adaptive intraocular lens based on a modal liquid-crystal spatial phase modulator with wireless control. The modal corrector consists of a nematic liquid-crystal layer sandwiched between two glass substrates with transparent low- and high-ohmic electrodes, respectively. Adaptive correction of ocular aberrations is achieved by changing the amplitude and the frequency of the applied control voltage. The convex-shaped glass substrates provide the required initial focusing power of the lens. A loop antenna mounded on the rim of the lens delivers an amplitude-modulated radio-frequency control signal to the integrated rectifier circuit that drives the liquid-crystal modal corrector. In vitro measurements of a 5-mm clear aperture prototype with an initial focusing power of +12.5 diopter, remotely driven by a radio-frequency control unit at ~6 MHz, were carried out using a Shack-Hartmann wavefront sensor. The lens based on a 40-mum thick liquid-crystal layer allows for an adjustable defocus of 4 waves, i. e. an accommodation of ~2.51 dioptres at a wavelength of 534 nm, and correction of spherical aberration coefficient ranging from -0.8 to 0.67 waves. Frequency-switching technique was employed to increase the response speed and eliminate transient overshoots in aberration coefficients. The full-scale settling time of the adaptive modal corrector was measured to be ~4 s.

  10. Intestinal preparation prior to capsule endoscopy administration

    Institute of Scientific and Technical Information of China (English)

    Vicente Pons Beltrán; Cristina Carretero; Bego(n)a Gonzalez-Suárez; I(n)aqui Fernández-Urien; Miguel Mu(n)oz Navas

    2008-01-01

    In order to have an adequate view of the whole small intestine during capsule endoscopy,the preparation recommended consists of a clear liquid diet and an overnight fast.However,visualization of the small bowel during video capsule endoscopy can be impaired by intestinal contents.To improve mucosal visualization,some authors have evaluated different regimens of preparation.There is no consensus about the necessity of intestinal preparation for capsule endoscopy and it should be interesting to develop adequate guidelines to improve its efficacy and tolerability.Moreover,the effect of preparation type (purgative) on intestinal transit time is not clear.Since a bowel preparation cannot definitively improve its visibility (and theoretically the yield of the test),it is not routinely recommended.

  11. Spectral measurements of asymmetrically irradiated capsule backlighters

    Science.gov (United States)

    Keiter, P. A.; Drake, R. P.

    2016-11-01

    Capsule backlighters provide a quasi-continuum x-ray spectrum over a wide range of photon energies [J. F. Hansen et al., Rev. Sci. Instrum. 79, 013504 (2008)]. Ideally one irradiates the capsule backlighter symmetrically, however, in complex experimental geometries, this is not always possible. In recent experiments we irradiated capsule backlighters asymmetrically and measured the x-ray spectrum from multiple directions. We will present time-integrated spectra over the photon energy range of 2-13 keV and time-resolved spectra over the photon energy range of 2-3 keV. We will compare the spectra from different lines of sight to determine if the laser asymmetry results in an angular dependence in the x-ray emission.

  12. Unsteady Pressures on a Generic Capsule Shape

    Science.gov (United States)

    Burnside, Nathan; Ross, James C.

    2015-01-01

    While developing the aerodynamic database for the Orion spacecraft, the low-speed flight regime (transonic and below) proved to be the most difficult to predict and measure accurately. The flow over the capsule heat shield in descent flight was particularly troublesome for both computational and experimental efforts due to its unsteady nature and uncertainty about the boundary layer state. The data described here were acquired as part of a study to improve the understanding of the overall flow around a generic capsule. The unsteady pressure measurements acquired on a generic capsule shape are presented along with a discussion about the effects of various flight conditions and heat-shield surface roughness on the resulting pressure fluctuations.

  13. Capsule endoscopy—A mechatronics perspective

    Science.gov (United States)

    Lin, Lin; Rasouli, Mahdi; Kencana, Andy Prima; Tan, Su Lim; Wong, Kai Juan; Ho, Khek Yu; Phee, Soo Jay

    2011-03-01

    The recent advances in integrated circuit technology, wireless communication, and sensor technology have opened the door for development of miniature medical devices that can be used for enhanced monitoring and treatment of medical conditions. Wireless capsule endoscopy is one of such medical devices that has gained significant attention during the past few years. It is envisaged that future wireless capsule endoscopies replace traditional endoscopy procedures by providing advanced functionalities such as active locomotion, body fluid/tissue sampling, and drug delivery. Development of energy-efficient miniaturized actuation mechanisms is a key step toward achieving this goal. Here, we review some of the actuators that could be integrated into future wireless capsules and discuss the existing challenges.

  14. Integrated Lens Antennas for Multi-Pixel Receivers

    Science.gov (United States)

    Lee, Choonsup; Chattopadhyay, Goutam

    2011-01-01

    Future astrophysics and planetary experiments are expected to require large focal plane arrays with thousands of detectors. Feedhorns have excellent performance, but their mass, size, fabrication challenges, and expense become prohibitive for very large focal plane arrays. Most planar antenna designs produce broad beam patterns, and therefore require additional elements for efficient coupling to the telescope optics, such as substrate lenses or micromachined horns. An antenna array with integrated silicon microlenses that can be fabricated photolithographically effectively addresses these issues. This approach eliminates manual assembly of arrays of lenses and reduces assembly errors and tolerances. Moreover, an antenna array without metallic horns will reduce mass of any planetary instrument significantly. The design has a monolithic array of lens-coupled, leaky-wave antennas operating in the millimeter- and submillimeter-wave frequencies. Electromagnetic simulations show that the electromagnetic fields in such lens-coupled antennas are mostly confined in approximately 12 15 . This means that one needs to design a small-angle sector lens that is much easier to fabricate using standard lithographic techniques, instead of a full hyper-hemispherical lens. Moreover, this small-angle sector lens can be easily integrated with the antennas in an array for multi-pixel imager and receiver implementation. The leaky antenna is designed using double-slot irises and fed with TE10 waveguide mode. The lens implementation starts with a silicon substrate. Photoresist with appropriate thickness (optimized for the lens size) is spun on the substrate and then reflowed to get the desired lens structure. An antenna array integrated with individual lenses for higher directivity and excellent beam profile will go a long way in realizing multi-pixel arrays and imagers. This technology will enable a new generation of compact, low-mass, and highly efficient antenna arrays for use in multi

  15. Video capsule endoscopy in inflammatory bowel disease

    Science.gov (United States)

    Collins, Paul D

    2016-01-01

    Video capsule endoscopy (VCE) has evolved to become an important tool for the non-invasive examination of the small bowel, which hitherto had been relatively inaccessible to direct visualisation. VCE has been shown to play a role in monitoring the activity of small bowel Crohn’s disease and can be used to assess the response to anti-inflammatory treatment in Crohn’s disease. For those patients with Crohn’s disease who have undergone an intestinal resection, VCE has been assessed as a tool to detect post-operative recurrence. VCE may also aid in the reclassification of patients with a diagnosis of Inflammatory Bowel Disease Unclassified to Crohn’s disease. The evolution of colon capsule endoscopy (CCE) has expanded the application of this technology further. The use of CCE to assess the activity of ulcerative colitis has been described. This advance in capsule technology has also fuelled interest in its potential role as a minimally invasive tool to assess the whole of GI tract opening the possibility of its use for the panenteric assessment of Crohn’s disease. VCE is a safe procedure. However, the risk of a retained capsule is higher in patients with suspected or confirmed Crohn’s disease compared with patients having VCE examination for other indications. A retained video capsule is rare after successful passage of a patency capsule which may be utilised to pre-screen patients undergoing VCE. This paper describes the use of VCE in the assessment of inflammatory bowel disease. PMID:27499830

  16. Wavelength dependence of focusing properties of two-dimensional photonic quasicrystal flat lens.

    Science.gov (United States)

    Liu, Jianjun; Fan, Zhigang; Hu, Haili; Yang, Maohua; Guan, Chunying; Yuan, Libo; Guo, Hao; Zhang, Xiong

    2012-05-15

    We investigated the wavelength dependence of the focusing properties of a germanium-cylinder-based two-dimensional (2D) decagonal Penrose-type photonic quasicrystal (PQC) flat lens for the first time, to the best of our knowledge. We found that near the second bandgap and in the high-frequency side (between the bandgap boundary and the first light intensity peak) of the pass band, the flat lens can exhibit a focusing effect for a point light source and that the focusing wavelengths can directly be drawn from the photonic band structure. For all the focusing wavelengths, the summation of the object distance and the image distance is less than the thickness of the flat lens when the object distance is half the thickness of the flat lens. As the wavelength increases, the image distance, the image quality, and the effective refractive index of the flat lens increase, whereas the image power of the point light source decreases. The effective refractive index of the flat lens is less than -1.

  17. Shielding Effect of Lead Glasses on Radiologists' Eye Lens Exposure in Interventional Procedures.

    Science.gov (United States)

    Hu, Panpan; Kong, Yan; Chen, Bo; Liu, Qianqian; Zhuo, Weihai; Liu, Haikuan

    2016-05-05

    To study the shielding effect of radiologists' eye lens with lead glasses of different equivalent thicknesses and sizes in interventional radiology procedures. Using the human voxel phantom with a more accurate model of the eye and MCNPX software, eye lens doses of the radiologists who wearing different kinds of lead glasses were simulated, different beam projections were taken into consideration during the simulation. Measurements were also performed with the physical model to verify simulation results. Simulation results showed that the eye lens doses were reduced by a factor from 3 to 9 when wearing a 20 cm(2)-sized lead glasses with the equivalent thickness ranging from 0.1 to 1.0 mm Pb. The increase of dose reduction factor (DRF) was not significant whenever increase the lead equivalent of glasses of which larger than 0.35 mm. Furthermore, the DRF was proportional to the size of glass lens from 6 to 30 cm(2) with the same lead equivalent. The simulation results were in well agreements with the measured ones. For more reasonable and effective protection of the eye lens of interventional radiologists, a pair of glasses with a lead equivalent of 0.5 mm Pb and large-sized (at least 27 cm(2) per glass) lens are recommended.

  18. Capsules with external navigation and triggered release.

    Science.gov (United States)

    Shchukin, Dmitry G; Shchukina, Elena

    2014-10-01

    Encapsulation is an important technology for pharmaceutical industry, food production, et cetera. Its current level of development requires capsule functionalization. One of the interesting ideas to provide new functionality to the microcapsule and nanocapsule is layer-by-layer deposition of functional species. This technique provides step-by-step adsorption of various species (polyelectrolytes, nanoparticles, proteins) when the layer growth is controlled by electrostatic, hydrogen bonding, hydrophobic forces and forming multilayer shells with nanometer precision. This review article introduces recent achievements of layer-by-layer technique attaining external navigation ability and release properties the capsule shell.

  19. Evaluation of the contribution of the renal capsule and cortex to kidney autofluorescence intensity under ultraviolet excitation

    Energy Technology Data Exchange (ETDEWEB)

    Raman, R N; Pivetti, C D; Rubenchik, A M; Matthews, D L; Troppmann, C; Demos, S G

    2008-12-12

    The use of reduced nicotinamide adenine dinucleotide (NADH) fluorescence to gain metabolic information on kidneys in response to an alteration in oxygen availability has previously been experimentally demonstrated, but signal quantification has not to date been addressed. In this work the relative contribution to rat kidney autofluorescence of the capsule vs. cortex under ultraviolet excitation is determined from experimental results obtained using autofluorescence microscopy and a suitable mathematical model. The results allow for a quantitative assessment of the relative contribution of the signal originating in the metabolically active cortex as a function of capsule thickness for different wavelengths.

  20. AGE-RAGE interaction in the TGFβ2-mediated epithelial to mesenchymal transition of human lens epithelial cells.

    Science.gov (United States)

    Raghavan, Cibin T; Nagaraj, Ram H

    2016-08-01

    Basement membrane (BM) proteins accumulate chemical modifications with age. One such modification is glycation, which results in the formation of advanced glycation endproducts (AGEs). In a previous study, we reported that AGEs in the human lens capsule (BM) promote the TGFβ2-mediated epithelial-to-mesenchymal transition (EMT) of lens epithelial cells, which we proposed as a mechanism for posterior capsule opacification (PCO) or secondary cataract formation. In this study, we investigated the role of a receptor for AGEs (RAGE) in the TGFβ2-mediated EMT in a human lens epithelial cell line (FHL124). RAGE was present in FHL124 cells, and its levels were unaltered in cells cultured on either native or AGE-modified BM or upon treatment with TGFβ2. RAGE overexpression significantly enhanced the TGFβ2-mediated EMT responses in cells cultured on AGE-modified BM compared with the unmodified matrix. In contrast, treatment of cells with a RAGE antibody or EN-RAGE (an endogenous ligand for RAGE) resulted in a significant reduction in the TGFβ2-mediated EMT response. This was accompanied by a reduction in TGFβ2-mediated Smad signaling and ROS generation. These results imply that the interaction of matrix AGEs with RAGE plays a role in the TGFβ2-mediated EMT of lens epithelial cells and suggest that the blockade of RAGE could be a strategy to prevent PCO and other age-associated fibrosis.

  1. Tinting of intraocular lens implants

    Energy Technology Data Exchange (ETDEWEB)

    Zigman, S.

    1982-06-01

    Intraocular lens (IOL) implants of polymethyl methacrylate (PMMA) lack an important yellow pigment useful as a filter in the visual process and in the protection of the retina from short-wavelength radiant energy. The ability to produce a yellow pigment in the PMMA used in IOL implants by exposure to near-ultraviolet (UV) light was tested. It was found that the highly cross-linked material in Copeland lens blanks was tinted slightly because of this exposure. The absorptive properties of lens blanks treated with near-UV light in this way approached that of the absorptive properties of human lenses. This finding shows that it is possible to alter IOL implants simply so as to induce a pale-yellow pigment in them to improve the visual process and to protect the retinas of IOL users.

  2. International rigid contact lens prescribing.

    Science.gov (United States)

    Efron, Nathan; Morgan, Philip B; Helland, Magne; Itoi, Motozumi; Jones, Deborah; Nichols, Jason J; van der Worp, Eef; Woods, Craig A

    2010-06-01

    Rigid lenses have been fitted less since the introduction of soft lenses nearly 40 years ago. Data that we have gathered from annual contact lens fitting surveys conducted in Australia, Canada, Japan, the Netherlands, Norway, the UK and the USA between 2000 and 2008 facilitate an accurate characterization of the pattern of the decline of rigid lens fitting during the first decade of this century. There is a trend for rigid lenses to be utilized primarily for refitting those patients who are already successful rigid lens wearers-most typically older females being refit with higher Dk materials. Rigid lenses are generally fitted on a full-time basis (four or more days of wear per week) without a planned replacement schedule. Orthokeratology is especially popular in the Netherlands, but is seldom prescribed in the other countries surveyed.

  3. The SNAP Strong Lens Survey

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, P.

    2005-01-03

    Basic considerations of lens detection and identification indicate that a wide field survey of the types planned for weak lensing and Type Ia SNe with SNAP are close to optimal for the optical detection of strong lenses. Such a ''piggy-back'' survey might be expected even pessimistically to provide a catalogue of a few thousand new strong lenses, with the numbers dominated by systems of faint blue galaxies lensed by foreground ellipticals. After sketching out our strategy for detecting and measuring these galaxy lenses using the SNAP images, we discuss some of the scientific applications of such a large sample of gravitational lenses: in particular we comment on the partition of information between lens structure, the source population properties and cosmology. Understanding this partitioning is key to assessing strong lens cosmography's value as a cosmological probe.

  4. Planar immersion lens with metasurfaces

    CERN Document Server

    Ho, John S; Tanabe, Yuji; Yeh, Alexander J; Fan, Shanhui; Poon, Ada S Y

    2015-01-01

    The solid immersion lens is a powerful optical tool that allows light entering material from air or vacuum to focus to a spot much smaller than the free-space wavelength. Conventionally, however, they rely on semispherical topographies and are non-planar and bulky, which limits their integration in many applications. Recently, there has been considerable interest in using planar structures, referred to as metasurfaces, to construct flat optical components for manipulating light in unusual ways. Here, we propose and demonstrate the concept of a planar immersion lens based on metasurfaces. The resulting planar device, when placed near an interface between air and dielectric material, can focus electromagnetic radiation incident from air to a spot in material smaller than the free-space wavelength. As an experimental demonstration, we fabricate an ultrathin and flexible microwave lens and further show that it achieves wireless energy transfer in material mimicking biological tissue.

  5. Algebraic Lens Distortion Model Estimation

    Directory of Open Access Journals (Sweden)

    Luis Alvarez

    2010-07-01

    Full Text Available A very important property of the usual pinhole model for camera projection is that 3D lines in the scene are projected to 2D lines. Unfortunately, wide-angle lenses (specially low-cost lenses may introduce a strong barrel distortion, which makes the usual pinhole model fail. Lens distortion models try to correct such distortion. We propose an algebraic approach to the estimation of the lens distortion parameters based on the rectification of lines in the image. Using the proposed method, the lens distortion parameters are obtained by minimizing a 4 total-degree polynomial in several variables. We perform numerical experiments using calibration patterns and real scenes to show the performance of the proposed method.

  6. Far-field characteristics of the square grooved-dielectric lens antenna for the terahertz band.

    Science.gov (United States)

    Pan, Wu; Zeng, Wei

    2016-09-10

    In order to improve the gain and directionality of a terahertz antenna, a square grooved-dielectric lens antenna based on a Fresnel zone plate is proposed. First, a diagonal horn, which is adopted as the primary feed antenna, is designed. Then, the far-field characteristics of the lens antenna are studied by using Fresnel-Kirchhoff diffraction theory and the paraxial approximation. The effects of the full-wave period, the focus diameter ratio, the subregion, and the dielectric substrate thickness on radiation characteristics are studied. The experimental results show that the proposed lens antenna has axisymmetric radiation patterns. The gain is over 26.1 dB, and the 3 dB main lobe beam width is lower than 5.6° across the operation band. The proposed lens antenna is qualified for applications in terahertz wireless communication systems.

  7. Focusing of a Flat Left-Handed Metamaterial Lens in a Heterogeneous and Lossy Medium

    Institute of Scientific and Technical Information of China (English)

    WANG Gang; FANG Jie-Ran; WANG Hong-Jin

    2009-01-01

    For applications such as near-field target detection and tumor hyperthermla with a fiat left-handed metamaterial (LHM) lens, a microwave will be focused in the heterogeneous and lossy medium. Different from the focusing of a fiat LHM lens in vacuum as reported in most previous studies, the medium loss and heterogeneity will affect the focusing performance of the LHM lens. Numerical simulations indicate that the medium loss will degrade the focusing resolution, while the heterogeneity of random variability within ±30% will affect the focusing resolution to a limited extent. Both the loss and heterogeneity of the medium will shift the focal point away from the image plane. When focusing in a medium with different permittivity values, an LHM lens will also have different focusing resolutions due to different electric thicknesses.

  8. Biodistribution of polymer hydrogel capsules for the delivery of therapeutics.

    Science.gov (United States)

    Hinton, Tracey M; Monaghan, Paul; Green, Diane; Kooijmans, Sander A A; Shi, Shuning; Breheney, Kerry; Tizard, Mark; Nicolazzo, Joseph A; Zelikin, Alexander N; Wark, Kim

    2012-09-01

    A key phase in the development of intelligently designed nanoparticle delivery vehicles for new therapeutic agents is to gain an understanding of their interaction with tissues and cells. We report a series of in vitro and in vivo experiments aimed at tracking a potential delivery vehicle for therapeutic agents, including vaccine peptides and drugs derived from poly(methacrylic acid) hydrogel capsules in certain organs and cell types. For the in vitro studies, two immortal liver-derived cell lines (Huh7 and Hepa1-6) and primary cultures of mouse hepatocytes were incubated with Alexa 647 labelled fluorescent capsules to track their internalization and intracellular distribution by confocal microscopy. Capsules, 500nm in diameter, were taken up into the cells in a time-dependent manner in all three cell lines. Capsules were observed in plasma membrane-derived vesicles within the cells. After 24h a significant proportion of the capsules was observed in lysosomes. To understand the behaviour of the capsules in vivo, Alexa 488 labelled fluorescent capsules were intravenously injected into Sprague-Dawley rats and after 24h the fate of the capsules in a number of organs was determined by flow cytometry and confocal microscopy. By flow cytometry, the majority of the capsules were detected in the spleen whilst similar numbers were found in the lung and liver. By confocal microscopy, the majority of the capsules were found in the liver and spleen with significantly less capsules in the lung, heart and kidney. Colocalization of capsules with cell-type specific markers indicated that in lung, heart and kidney, the majority of the capsules were located in endothelial cells. In the spleen ~50% of the capsules were found in CD163-positive cells, whereas in the liver, almost all capsules were located in CD163-positive cells, indicating uptake by Kupffer cells. Electron microscopy confirmed the presence of capsules within Kupffer cells. Crown Copyright © 2012. Published by

  9. Capsule endoscopy: Current status in obscure gastrointestinal bleeding

    Institute of Scientific and Technical Information of China (English)

    R Gupta; Nageshwar Duvvuru Reddy

    2007-01-01

    Capsule endoscopy (CE) is a safe, non invasive diagnostic modality for the evaluation of small bowel lesions. Obscure gastrointestinal bleeding (OGIB) is one of the most important indications of capsule endoscopy.Capsule endoscopy has a very high diagnostic yield especially if the bleeding is ongoing. This technique appears to be superior to other techniques for the detection of suspected lesions and the source of bleeding. Capsule endoscopy has been shown to change the outcome in patients with obscure gastrointestinal (GI)bleed.

  10. Panoramic lens designed with transformation optics

    Science.gov (United States)

    Wang, Huaping; Deng, Yangyang; Zheng, Bin; Li, Rujiang; Jiang, Yuyu; Dehdashti, Shahram; Xu, Zhiwei; Chen, Hongsheng

    2017-01-01

    The panoramic lens is a special kind of lens, which is applied to observe full view. In this letter, we theoretically present a panoramic lens (PL) using transformation optics method. The lens is designed with inhomogeneous and anisotropic constitutive parameters, which has the ability to gather light from all directions and confine light within the visual angle of observer. Simulation results validate our theoretical design.

  11. SimpLens: Interactive gravitational lensing simulator

    Science.gov (United States)

    Saha, Prasenjit; Williams, Liliya L. R.

    2016-06-01

    SimpLens illustrates some of the theoretical ideas important in gravitational lensing in an interactive way. After setting parameters for elliptical mass distribution and external mass, SimpLens displays the mass profile and source position, the lens potential and image locations, and indicate the image magnifications and contours of virtual light-travel time. A lens profile can be made shallower or steeper with little change in the image positions and with only total magnification affected.

  12. The thickness of glaciers

    Science.gov (United States)

    Faraoni, Valerio; Vokey, Marshall W.

    2015-09-01

    Basic formulae and results of glacier physics appearing in glaciology textbooks can be derived from first principles introduced in algebra-based first year physics courses. We discuss the maximum thickness of alpine glaciers and ice sheets and the relation between maximum thickness and length of an ice sheet. Knowledge of ordinary differential equations allows one to derive also the local ice thickness.

  13. Mitochondrial oxygen metabolism in primary human lens epithelial cells: Association with age, diabetes and glaucoma.

    Science.gov (United States)

    Kubota, M; Shui, Y B; Liu, M; Bai, F; Huang, A J; Ma, N; Beebe, D C; Siegfried, C J

    2016-08-01

    The hypoxic environment around the lens is important for maintaining lens transparency. Lens epithelial cells (LECs) play a key role in lens metabolism. We measured oxygen consumption to assess the role of human LECs in maintaining hypoxia around the lens, as well as the impact of systemic and ocular diagnosis on these cells. Baseline cellular respiration was measured in rabbit LECs (NN1003A), canine kidney epithelial cells (MDCK), trabecular meshwork cells (TM-5), and bovine corneal endothelial cells (CCEE) using a XF96 Extracellular Flux Analyzer (Seahorse Bioscience, North Billerica, MA), which measures oxygen consumption rate (OCR) and extracellular acidification rate (ECAR) in vitro. Following informed written consent, lens capsule epithelial cells were obtained from patients during cataract surgery and were divided into small explants in 96-well plates. Capsules were removed when LECs became confluent. OCR was normalized to the number of cells per well using rabbit LECs as a standard. The effect of patient age, sex, race, and presence of diabetes or glaucoma on oxygen consumption was assessed by using the Mann-Whitney U test and multivariate regression analysis. Primary LECs were obtained from 69 patients. The OCR from donors aged 70 and over was lower than that of those under 70 years (2.21±1.037 vs. 2.86±1.383 fmol/min/cell; pOCR than non-diabetic patients (2.02±0.911 vs. 2.79±1.332fmol/min/cell; pOCR than non-glaucoma patients (2.27±1.19 vs. 2.83±1.286 fmol/min/cell; pOCR, independent of other variables. Gender and race had no significant effect on OCR. The lower oxygen consumption rate of human LECs in older donors and patients with diabetes or glaucoma could contribute to cataract development. Diabetes and glaucoma are particularly important factors associated with decreased OCR, independent of age. Ongoing studies are examining pO2 at the anterior surface of the lens in vivo and oxygen consumption in the patient's LECs. Copyright © 2016 Elsevier

  14. 21 CFR 520.90a - Ampicillin capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ampicillin capsules. 520.90a Section 520.90a Food... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.90a Ampicillin capsules. (a) Specifications. Each capsule contains 125 milligrams or 250 milligrams of ampicillin. (b) Sponsor. See No. 000008...

  15. 21 CFR 520.580 - Dichlorophene and toluene capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Dichlorophene and toluene capsules. 520.580 Section 520.580 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Dichlorophene and toluene capsules. (a) Specifications. Each soft gelatin capsule contains 50 milligrams of...

  16. 21 CFR 520.1920 - Prochlorperazine, isopropamide sustained release capsules.

    Science.gov (United States)

    2010-04-01

    ... capsules. 520.1920 Section 520.1920 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND... § 520.1920 Prochlorperazine, isopropamide sustained release capsules. (a) Specifications. Prochlorperazine, isopropamide sustained release capsules contain either: (1) 3.33 milligrams of prochlorperazine...

  17. 21 CFR 520.260 - n-Butyl chloride capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride capsules. (a)(1) Specifications. n-Butyl chloride capsules, veterinary contain 272 milligrams or 816 milligrams...

  18. 21 CFR 520.1804 - Piperazine phosphate capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Piperazine phosphate capsules. 520.1804 Section 520.1804 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... phosphate capsules. (a) Specifications. Each capsule contains 120, 300, or 600 milligrams of piperazine...

  19. 21 CFR 520.90c - Ampicillin trihydrate capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ampicillin trihydrate capsules. 520.90c Section 520.90c Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... trihydrate capsules. (a) Specifications. Each capsule contains ampicillin trihydrate equivalent to 125, 250...

  20. 21 CFR 520.608 - Dicloxacillin sodium monohydrate capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Dicloxacillin sodium monohydrate capsules. 520.608 Section 520.608 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Dicloxacillin sodium monohydrate capsules. (a) Specifications. Each capsule contains dicloxacillin sodium...

  1. 21 CFR 520.622d - Diethylcarbamazine citrate capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Diethylcarbamazine citrate capsules. 520.622d Section 520.622d Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Diethylcarbamazine citrate capsules. (a) Specifications. Each capsule contains 12.5, 50, 200, or 400 milligrams (mg...

  2. 21 CFR 872.3110 - Dental amalgam capsule.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental amalgam capsule. 872.3110 Section 872.3110...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3110 Dental amalgam capsule. (a) Identification. A dental amalgam capsule is a container device in which silver alloy is intended to be mixed with...

  3. Ingestible capsule for remote controlled release of a substance

    DEFF Research Database (Denmark)

    2014-01-01

    The application relates to an ingestible capsule (102) for delivery of a substance e.g. a pharmaceutical drug, to a human or animal. The ingestible capsule comprises a capsule wall structure (202) forming a substantially sealed reservoir or lumen holding the substance (204). An electrical resonan...

  4. The migration of human lens epithelial cells induced by UV-irradiation in vitro

    Institute of Scientific and Technical Information of China (English)

    Jin Yao; Guoxing Yuan; Yuan Liu; Yi Shen; Qin Jiang

    2008-01-01

    Objective: Ultraviolet (UV) radiation is one of the important cataract risk factors. However, the pathogenesis is still poorly understood.The migration of human lens epithelial cells(HLECs) plays a crucial role in the remodeling of lens capsule and cataract formation. The purpose of this study is to investigate the mechanism of UV inducing cataractogenesis. Methods:The toxicity of UV-irradiation on HLECs was assessed by Methyl thiazolyl tetrazolium(MTT) assay. The activity of matrix metalloproteinase-2(MMP-2) was observed by Gelatin zymography. The migration of HLECs was examined by Cell Track Motility. Results:UV-irradiation does great harm to HLECs, and may induce apoptosis in the cells when UV higher than 15 mj/cm2. UV significantly increased MMP-2 activity in a timedependent manner. In addition, the irradiation could induce the migration of HLECs. Conclusion:UV-irradiation could induce the migration of HLECs by increasing the activity of MMP-2.

  5. Results of phacoemulsification of cataract complicated by lens subluxation depending on the ring setting method

    Directory of Open Access Journals (Sweden)

    N. G. Zavgorodnjaja

    2015-02-01

    Full Text Available Actuality. Cataract extraction complicated by zonular weakness remains one of the urgent problems of eye microsurgery. Aim. To increase the efficiency of cataract surgery complicated by lens subluxation through comparative analysis of frequency and structure of intra- and postoperative complications, as well as the functional results of surgical treatment of patients depending on the ring setting method. Methods and results. 91 patients (93 eyes were examined, who were operated on complicated cataract, and were divided into 2 groups depending on the method of ring setting. Conclusion. It was established that the offered method of implant capsular ring gives the opportunity to reduce the length of patients’ treatment by 2,6 day, to decrease of 28,43% for complications, and also to avoid such heavy operating complications, as a vitreous prolapse, displacement of the eye lens fragments in a vitreous body, dug up capsule bag.

  6. Electrohydrodynamic deformation of capsules in electric field

    Science.gov (United States)

    Das, Sudip; Thaokar, Rochish

    2016-11-01

    Micron size capsules are abundant in natural, technological and biological processes but they still require extensive investigation for better understanding of their mechanical behavior. A spherical capusle containing a Newtonian fluid bounded by a viscoelastic membrane and immersed in another Newtonian fluid, and subject to electric field is considered. Discontinuity of electrical properties such as conductivity and permittivity leads to a net Maxwell stress at the capsule interface. In response the capsule undergoes elastic deformation, leading to strain fields and elastic stresses that can balance the applied forces. We investigate this problem with fully resolved hydrodynamics in the Stokes flow limit and electrostatics using the capacitance model. Effect of AC, DC and pulsed DC fields is investigated. Our results show that membrane electrical properties have a huge impact on the equilibrium deformation as well as on the break up of capsules. Our results match with the literature results in the limit of high conductance of the membrane. Analytical theory is employed using spherical harmonics and numerical investigations are conducted using the Boundary integral method.

  7. Student Mobility. Information Capsule. Volume 0608

    Science.gov (United States)

    Blazer, Christie

    2007-01-01

    Mobility, rather than stability, has become the norm for students in schools across the United States. The student mobility rate is now higher in the United States than in any other industrialized country. This Information Capsule discusses the reasons for student mobility and the characteristics of highly mobile students and families. Research…

  8. Design of Endoscopic Capsule With Multiple Cameras.

    Science.gov (United States)

    Gu, Yingke; Xie, Xiang; Li, Guolin; Sun, Tianjia; Wang, Dan; Yin, Zheng; Zhang, Pengfei; Wang, Zhihua

    2015-08-01

    In order to reduce the miss rate of the wireless capsule endoscopy, in this paper, we propose a new system of the endoscopic capsule with multiple cameras. A master-slave architecture, including an efficient bus architecture and a four level clock management architecture, is applied for the Multiple Cameras Endoscopic Capsule (MCEC). For covering more area of the gastrointestinal tract wall with low power, multiple cameras with a smart image capture strategy, including movement sensitive control and camera selection, are used in the MCEC. To reduce the data transfer bandwidth and power consumption to prolong the MCEC's working life, a low complexity image compressor with PSNR 40.7 dB and compression rate 86% is implemented. A chipset is designed and implemented for the MCEC and a six cameras endoscopic capsule prototype is implemented by using the chipset. With the smart image capture strategy, the coverage rate of the MCEC prototype can achieve 98% and its power consumption is only about 7.1 mW.

  9. Simulating and optimizing compound refractive lens-based X-ray microscopes

    Science.gov (United States)

    Simons, Hugh; Ahl, Sonja Rosenlund; Poulsen, Henning Friis; Detlefs, Carsten

    2017-01-01

    A comprehensive optical description of compound refractive lenses (CRLs) in condensing and full-field X-ray microscopy applications is presented. The formalism extends ray-transfer matrix analysis by accounting for X-ray attenuation by the lens material. Closed analytical expressions for critical imaging parameters such as numerical aperture, spatial acceptance (vignetting), chromatic aberration and focal length are provided for both thin- and thick-lens imaging geometries. These expressions show that the numerical aperture will be maximized and chromatic aberration will be minimized at the thick-lens limit. This limit may be satisfied by a range of CRL geometries, suggesting alternative approaches to improving the resolution and efficiency of CRLs and X-ray microscopes.

  10. In vivo human crystalline lens topography.

    Science.gov (United States)

    Ortiz, Sergio; Pérez-Merino, Pablo; Gambra, Enrique; de Castro, Alberto; Marcos, Susana

    2012-10-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye with known surfaces geometry and on a human lens in vitro, and demonstrated on three human lenses in vivo. Not correcting for distortion overestimated the anterior lens radius by 25% and the posterior lens radius by more than 65%. In vivo lens surfaces were fitted by biconicoids and Zernike polynomials after distortion correction. The anterior lens radii of curvature ranged from 10.27 to 14.14 mm, and the posterior lens radii of curvature ranged from 6.12 to 7.54 mm. Surface asphericities ranged from -0.04 to -1.96. The lens surfaces were well fitted by quadrics (with variation smaller than 2%, for 5-mm pupils), with low amounts of high order terms. Surface lens astigmatism was significant, with the anterior lens typically showing horizontal astigmatism ([Formula: see text] ranging from -11 to -1 µm) and the posterior lens showing vertical astigmatism ([Formula: see text] ranging from 6 to 10 µm).

  11. 21 CFR 886.3600 - Intraocular lens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens. 886.3600 Section 886.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3600 Intraocular lens. (a) Identification. An intraocular lens is a device made of materials...

  12. Advances in lenticular lens arrays for visual display

    Science.gov (United States)

    Johnson, R. Barry; Jacobsen, Gary A.

    2005-08-01

    Lenticular lens arrays are widely used in the printed display industry and in specialized applications of electronic displays. In general, lenticular arrays can create from interlaced printed images such visual effects as 3-D, animation, flips, morph, zoom, or various combinations. The use of these typically cylindrical lens arrays for this purpose began in the late 1920's. The lenses comprise a front surface having a spherical crosssection and a flat rear surface upon where the material to be displayed is proximately located. The principal limitation to the resultant image quality for current technology lenticular lenses is spherical aberration. This limitation causes the lenticular lens arrays to be generally thick (0.5 mm) and not easily wrapped around such items as cans or bottles. The objectives of this research effort were to develop a realistic analytical model, to significantly improve the image quality, to develop the tooling necessary to fabricate lenticular lens array extrusion cylinders, and to develop enhanced fabrication technology for the extrusion cylinder. It was determined that the most viable cross-sectional shape for the lenticular lenses is elliptical. This shape dramatically improves the image quality. The relationship between the lens radius, conic constant, material refractive index, and thickness will be discussed. A significant challenge was to fabricate a diamond-cutting tool having the proper elliptical shape. Both true elliptical and pseudo-elliptical diamond tools were designed and fabricated. The plastic sheets extruded can be quite thin (< 0.25 mm) and, consequently, can be wrapped around cans and the like. Fabrication of the lenticular engraved extrusion cylinder required remarkable development considering the large physical size and weight of the cylinder, and the tight mechanical tolerances associated with the lenticular lens molds cut into the cylinder's surface. The development of the cutting tool and the lenticular engraved

  13. Kinetic simulation of hydrodynamic equivalent capsule implosions

    Science.gov (United States)

    Kwan, Thomas; Le, Ari; Schmitt, Mark; Herrmann, Hans

    2016-10-01

    We have carried out simulations of direct-drive hydrodynamic equivalent capsule implosion experiments conducted on Omega laser facility at the Laboratory of Laser Energetics of the University of Rochester. The capsules had a glass shell (SiO2) 4.87 μm with an inner diameter of 1086 μm. One was filled with deuterium (D) and tritium (T) at 6.635 and 2.475 atmospheric pressure respectively. The other capsule with D, T, and He-3 at 2.475, 2.475, and 5.55 atmospheric pressure respectively. The capsules were imploded with 60 laser beams with a square pulse length of 0.6ns of total energy of 15.6 kJ. One-dimensional radiation hydrodynamic calculations with HYDRA and kinetic particle/hybrid simulations with LSP are carried out for the post-shot analysis. HYDRA outputs at 0.6ns are linked to LSP, in which the electrons are treated as a fluid while all the ion dynamics is simulated by the standard particle-in-cell technique. Additionally, simulations with the new photon package in LSP are initiated at the beginning of the implosion to include the implosion phase of the capsule. The simulation results of density, temperature, and velocity profiles of the electrons, D, T, He-3, and SiO2species are compared with HYDRA. Detail comparisons among the kinetic simulations, rad-hydro simulations, and experimental results of neutron yield, yield ratio, fusion burn histories, and shell convergence will be presented to assess plasma kinetic effects. Work performed under the auspices of the US DOE by the Los Alamos National Laboratory under Contract No. W7405-ENG-36.

  14. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus...

  15. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus for ...

  16. The Ultrawideband Leaky Lens Antenna

    NARCIS (Netherlands)

    Bruni, S.; Neto, A.; Marliani, F.

    2007-01-01

    A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design.

  17. Volumetric rendering and metrology of spherical gradient refractive index lens imaged by angular scan optical coherence tomography system.

    Science.gov (United States)

    Yao, Jianing; Thompson, Kevin P; Ma, Bin; Ponting, Michael; Rolland, Jannick P

    2016-08-22

    In this paper, we develop the methodology, including the refraction correction, geometrical thickness correction, coordinate transformation, and layer segmentation algorithms, for 3D rendering and metrology of a layered spherical gradient refractive index (S-GRIN) lens based on the imaging data collected by an angular scan optical coherence tomography (OCT) system. The 3D mapping and rendering enables direct 3D visualization and internal defect inspection of the lens. The metrology provides assessment of the surface geometry, the lens thickness, the radii of curvature of the internal layer interfaces, and the misalignment of the internal S-GRIN distribution with respect to the lens surface. The OCT metrology results identify the manufacturing defects, and enable targeted process development for optimizing the manufacturing parameters. The newly fabricated S-GRIN lenses show up to a 7x spherical aberration reduction that allows a significantly increased utilizable effective aperture.

  18. Liquid-core capsules via interfacial polymerization: a free-radical analogy of the nylon rope trick.

    Science.gov (United States)

    Scott, Charles; Wu, Dan; Ho, Chia-Chi; Co, Carlos C

    2005-03-30

    Liquid-core capsules have wide-ranging applications in the high-efficiency encapsulation and controlled release of drugs, dyes, enzymes, and other substrates. Their great utility has driven the rapid development of various preparation techniques. However, there remains no convenient technique for the preparation of submicrometer liquid-core capsules with shell thicknesses less than 100 nm. Here, we demonstrate a new interfacial free-radical polymerization approach for the straightforward preparation of liquid-core polymer capsules. Conceptually, this interfacial free-radical polymerization is analogous to the classical "nylon rope trick" wherein hydrophobic and hydrophilic monomers alternately copolymerize to constrain the polymerization at interfaces, but its free-radical mechanism allows precise control of initiation, which makes it possible to finely disperse the immiscible phases prior to polymerization.

  19. Estimation of the hybrid lens parameters through rigid gas permeable lens fitting

    OpenAIRE

    Hasani, Mohammadali; Hashemi, Hassan; Jafarzadehpur, Ebrahim; Yekta, Abbas Ali; Dadbin, Nooshin; khabazkhoob, Mehdi

    2016-01-01

    Purpose To estimate the fitting parameters of the hybrid contact lens in patients with corneal ectasia using the rigid gas permeable (RGP) lens. Methods Thirty-four eyes with corneal ectasia were evaluated in this study. The patients were examined once with the RGP lens and once with the hybrid contact lens. The relationship between the base curvature of the RGP and the vault of the hybrid lens and the correlation between their powers were analyzed. Results We found a linear relationship betw...

  20. Multifocal contact lens myopia control.

    Science.gov (United States)

    Walline, Jeffrey J; Greiner, Katie L; McVey, M Elizabeth; Jones-Jordan, Lisa A

    2013-11-01

    Previous studies on soft multifocal contact lens myopia control published in the peer-reviewed literature reported findings of noncommercial contact lenses worn for 1 year or less. This study sought to determine the progression of myopia and axial elongation of children fitted with commercially available distance center soft multifocal contact lenses for 2 years. Eight- to eleven-year-old children with -1.00 D to -6.00 D spherical component and less than 1.00 D astigmatism were fitted with soft multifocal contact lenses with a +2.00 D add (Proclear Multifocal "D"; CooperVision, Fairport, NY). They were age- and gender-matched to participants from a previous study who were fitted with single-vision contact lenses (1 Day Acuvue; Vistakon, Jacksonville, FL). A-scan ultrasound and cycloplegic autorefraction were performed at baseline, after 1 year, and after 2 years. Multilevel modeling was used to compare the rate of change of myopia and axial length between single-vision and soft multifocal contact lens wearers. Forty participants were fitted with soft multifocal contact lenses, and 13 did not contribute complete data (5 contributed 1 year of data). The adjusted mean ± standard error spherical equivalent progression of myopia at 2 years was -1.03 ± 0.06 D for the single-vision contact lens wearers and -0.51 ± 0.06 for the soft multifocal contact lens wearers (p < 0.0001). The adjusted mean axial elongation was 0.41 ± 0.03 and 0.29 ± 0.03 for the single-vision and soft multifocal contact lens wearers, respectively (p < 0.0016). Soft multifocal contact lens wear resulted in a 50% reduction in the progression of myopia and a 29% reduction in axial elongation during the 2-year treatment period compared to a historical control group. Results from this and other investigations indicate a need for a long-term randomized clinical trial to investigate the potential for soft multifocal contact lens myopia control.

  1. Evaluation of ultrasound velocity in enucleated equine aqueous humor, lens and vitreous body

    NARCIS (Netherlands)

    Meister, Ulrike; Ohnesorge, Bernhard; Körner, Daniel; Boevé, Michael H

    2014-01-01

    BackgroundSonographic ophthalmic examinations have become increasingly important in veterinary medicine. If the velocity of ultrasound in ocular tissues is known, the A-mode ultrasound method may be used to determine the axial intraocular distances, such as anterior chamber depth, lens thickness,

  2. Evaluation of ultrasound velocity in enucleated equine aqueous humor, lens and vitreous body

    NARCIS (Netherlands)

    Meister, Ulrike; Ohnesorge, Bernhard; Körner, Daniel; Boevé, Michael H

    2014-01-01

    BackgroundSonographic ophthalmic examinations have become increasingly important in veterinary medicine. If the velocity of ultrasound in ocular tissues is known, the A-mode ultrasound method may be used to determine the axial intraocular distances, such as anterior chamber depth, lens thickness, ax

  3. Large deformation of liquid capsules enclosed by thin shells immersed in the fluid

    Science.gov (United States)

    Le, Duc-Vinh; Tan, Zhijun

    2010-06-01

    The deformation of a liquid capsule enclosed by a thin shell in a simple shear flow is studied numerically using an implicit immersed boundary method. We present a thin-shell model for computing the forces acting on the shell middle surface during the deformation within the framework of the Kirchhoff-Love theory of thin shells. This thin-shell model takes full account of finite-deformation kinematics which allows thickness stretching as well as large deflections and bending strains. For hyperelastic materials, the plane-stress assumption is used to compute the hydrostatic pressure and the incompressibility condition yields the thickness strain component and the corresponding change in the thickness. The stresses developing over the cross-section of the shell are integrated over the thickness to yield the stress and moment resultants which are then used to compute the forces acting on the shell middle surface. The immersed boundary method is employed for calculating the hydrodynamics and fluid-structure interaction effects. The location of the thin shell is updated implicitly using the Newton-Krylov method. The present numerical technique has been validated by several examples including an inflation of a spherical shell and deformations of spherical and oblate spheroidal capsules in the shear flow.

  4. Expression of P53 during Lens Epithelial Cell Apoptosis Induced by Ultraviolet

    Institute of Scientific and Technical Information of China (English)

    SUN; Xufang; ZOU; Weiyu; ZHAO; Changsong

    2001-01-01

    The apoptosis of lens epithelial cells (LECs) induced by ultraviolet and the expression of P53 were investigated. Wistar rats received 100 mW/m2 ultraviolet irradiation (UVR) (λ=280 nm-315 nm) for 15 min. One, 6, 24 h after irradiation the lens capsules were dissected. The percentages of apoptotic cells were evaluated by the TdT-dUTP terminal nick-end labeling (TUNEL) technique and the expression of P53 was detected by using immunohistochemical assay. The results showed that the percentages of TUNEL-positive nuclei at 24 h after irradiation was significantly higher than in the control group and those 1 h, 6 h after irradiation. The percentages of P53-positive cells at 6 h,24 h after irradiation were significantly higher than in the control group and those 1 h after irradiation. It was concluded that UVR could induce the apoptosis of lens epithelial cell. The expression of P53 might be responsible for the apoptosis of lens epithelial cells.

  5. Anterior lens epithelium in intumescent white cataracts - scanning and transmission electron microscopy study.

    Science.gov (United States)

    Andjelic, Sofija; Drašlar, Kazimir; Hvala, Anastazija; Hawlina, Marko

    2016-02-01

    Our purpose was to study the structure of the lens epithelial cells (LECs) of intumescent white cataracts (IC) in comparison with nuclear cataracts (NC) in order to investigate possible structural reasons for development of IC. The anterior lens capsule (aLC: basement membrane and associated LECs) were obtained from cataract surgery and prepared for scanning electron microscopy (SEM) and transmission electron microscopy (TEM). We observed by SEM that in IC, LEC swelling was pronounced with the clefts surrounding the groups of LECs. Another structural feature was spherical formations, that were observed on the apical side of LEC's, towards the fibre cell layer, both by SEM and TEM. Development of these structures, bulging out from the apical cell membrane of the LEC's and disrupting it, could be followed in steps towards the sphere formation. The degeneration of the lens epithelium and the structures of the aLC in IC similar to Morgagnian globules were also observed. None of these structural changes were observed in NC. We show by SEM and TEM that, in IC, LECs have pronounced structural features not observed in NC. This supports the hypothesis that the disturbed structure of LECs plays a role in water accumulation in the IC lens. We also suggest that, in IC, LECs produce bulging spheres that represent unique structures of degenerated material, extruded from the LEC.

  6. The Role of Type IV Collagen in Developing Lens in Mouse Fetuses

    Directory of Open Access Journals (Sweden)

    Mehdi Jalali

    2009-09-01

    Full Text Available Objective(sExtracellular matrix (ECM and basement membrane (BM play important roles in many developmental processes during development and after birth. Among the components of the BM, collagen fibers specially type IV are the most important parts. The aim of this study was to determine the time when collagen type IV appears in the BM of lens structure during mouse embryonic development.Materials and MethodsIn this experimental study, 22 female Balb/C mice were randomly selected and were kept under normal condition, finding vaginal plug was assumed as day zero of pregnancy. From embryonic day 10 to 20, all specimens were sacrificed by cervical dislocation and their heads were fixed, serially sectioned and immunohistochemistry study for tracing collagen type IV in lens were carried out.ResultsOur data revealed that collagen type IV appeared at the early stage of gestation day 12 in BM of anterior epithelial lens cells and the amount of this protein gradually increased until days 15-17 in ECM and posterior capsule epithelium. After this period, severe reaction was not observed in any part of the lens.ConclusionThese findings establish the important role of collagen IV in developing optic cup and any changes during critical period of pregnancy may be result in severe visual system defect

  7. Symptomatic Patency Capsule Retention in Suspected Crohn's Disease

    DEFF Research Database (Denmark)

    Rasmussen, Bjørn; Nathan, Torben; Jensen, Michael Dam

    2016-01-01

    The main limitation of capsule endoscopy is the risk of capsule retention. In patients with suspected Crohn's disease, however, this complication is rare, and if a small bowel stenosis is not reliably excluded, small bowel patency can be confirmed with the Pillcam patency capsule. We present two...... patients examined for suspected Crohn's disease who experienced significant symptoms from a retained patency capsule. Both patients had Crohn's disease located in the terminal ileum. In one patient, the patency capsule caused abdominal pain and vomiting and was visualized at magnetic resonance enterography...

  8. Modern lens antennas for communications engineering

    CERN Document Server

    Thornton, John

    2012-01-01

    The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas.  Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc.  The major advantages of lens antennas are na

  9. Capsule implosions for continuum x-ray backlighting of opacity samples at the National Ignition Facility

    Science.gov (United States)

    Opachich, Y. P.; Heeter, R. F.; Barrios, M. A.; Garcia, E. M.; Craxton, R. S.; King, J. A.; Liedahl, D. A.; McKenty, P. W.; Schneider, M. B.; May, M. J.; Zhang, R.; Ross, P. W.; Kline, J. L.; Moore, A. S.; Weaver, J. L.; Flippo, K. A.; Perry, T. S.

    2017-06-01

    Direct drive implosions of plastic capsules have been performed at the National Ignition Facility to provide a broad-spectrum (500-2000 eV) X-ray continuum source for X-ray transmission spectroscopy. The source was developed for the high-temperature plasma opacity experimental platform. Initial experiments using 2.0 mm diameter polyalpha-methyl styrene capsules with ˜20 μm thickness have been performed. X-ray yields of up to ˜1 kJ/sr have been measured using the Dante multichannel diode array. The backlighter source size was measured to be ˜100 μm FWHM, with ˜350 ps pulse duration during the peak emission stage. Results are used to simulate transmission spectra for a hypothetical iron opacity sample at 150 eV, enabling the derivation of photometrics requirements for future opacity experiments.

  10. Conjunctival impression cytology in contact lens wearers.

    Directory of Open Access Journals (Sweden)

    Simon Priya

    2002-01-01

    Full Text Available PURPOSE: To evaluate the cytological changes in conjunctiva following regular contact lens wear and to determine the correlation, if any, between severity of cytological alteration and symptoms related to contact lens wear. METHODS: One hundred eyes (50 normal asymptomatic subjects who served as a control group were studied by conjunctival impression cytology (CIC. These subjects were fitted with rigid gas permeable (RGP or soft contact lenses and were followed up at the end of 3 and 6 months. At each follow-up visit the CIC was repeated. A filter paper with the impression specimen was stained with periodic acid schiff (PAS and haematoxylin stain to study goblet cell loss. Papanicolaou stain was done to study squamous metaplasia. The cytological changes were graded using the system described by Natadisastra et al. RESULTS: Severity of cytological changes increased with the duration of contact lens wear (P = 0.00001. At the end of 6 months, 60% of symptomatic eyes wearing soft contact lens and RGP lens showed abnormal CIC changes. None of the asymptomatic RGP contact lens wearing eyes showed abnormal CIC changes whereas 33.4% of the asymptomatic soft contact lens wearing eyes showed abnormal CIC changes (P = 0.033. Epithelial changes occurred within 3-6 months of contact lens fitting. CONCLUSION: Severity of cytological changes increased with duration of lens wear (P = 0.00001. Prevalence and severity of cytological alteration is more in symptomatic contact lens wearers. Soft contact lens wearers although asymptomatic showed severe CIC changes.

  11. Study on the Effects of Liquid Thermal Media on the Irradiation Capsule of High-Temperature Materials

    Directory of Open Access Journals (Sweden)

    Man Soon Cho

    2015-01-01

    Full Text Available Irradiation tests of materials at HANARO have usually been conducted using a standard capsule at temperatures of about 300°C for irradiation of materials used at PWR. Thus, the standard capsule uses aluminum as the specimen holder, which acts to dissipate the thermal energy. Future nuclear systems such as a VHTR and SFR require the irradiation tests at a relatively high temperature. As an alternative to aluminum which has been used as the thermal media in a standard material capsule, the characteristics of liquid metals such as NaK and LBE are reviewed. The temperatures of the capsule are affected by the variation of parameters such as the gap and wall thickness of the container. In particular, the external gap is most important in determining the temperature of the specimen. LBE raises the temperature of the specimen higher than NaK at the same configuration of the capsule. Thus, LBE can lessen the gap of the parts and reduce the vibration for a stable long-term test in reactor.

  12. Simulations of symcap and layered NIF experiments with top/bottom laser asymmetry to impose P1 drive on capsules

    Science.gov (United States)

    Eder, D.; Spears, B.; Casey, D.; Pak, A.; Ma, T.; Izumi, N.; Pollock, B.; Weber, C.; Kritcher, A.; Jones, O.; Milovich, J.; Town, R.; Robey, H.; Hinkel, D.; Callahan, D.; Hatchett, S.; Knauer, J.; Yeamans, C.; Bleuel, D.; Nagel, S.; Hatarik, R.; Khan, S.; Sayre, D.; Caggiano, J.; Grim, G.; Eckart, M.; Fittinghoff, D.; Merrill, F.; Bradley, D.

    2016-05-01

    Integrated hohlraum/capsule post-shot simulation of the first full-scale cryogenic layered-DT experiment with top/bottom laser asymmetries of 8% is discussed. The imposed P1 Legendre mode drive on the capsule results in downward velocity of 85 ± 15 km/s as measured by neutron time of flight (NTOF) diagnostics and x-ray imagers, which is in excellent agreement with the calculated velocity of 87 km/s. The measured DT yield is approximately 30% less than the average of two comparable shots using the same 4 shock HiFoot pulse shape without drive asymmetry. The calculated DT yield of 5.0e15 is very close to the measured value of 4.86e15 for the shot with drive asymmetry, which implies that P1 effects dominate yield reduction. The neutron activation diagnostics (NADs) give clear indication of higher areal density in the direction of the north pole in excellent agreement with calculations. Integrated post-shot simulation of an earlier symcap (capsule with appropriate ablator thicknesses to act as a surrogate for an ignition capsule) experiment with laser asymmetries show that calculated neutron-wighted velocity is a strong function of capsule shape.

  13. Expression of the sodium potassium chloride cotransporter (NKCC1) and sodium chloride cotransporter (NCC) and their effects on rat lens transparency.

    Science.gov (United States)

    Chee, K N; Vorontsova, I; Lim, J C; Kistler, J; Donaldson, P J

    2010-05-04

    To characterize the expression patterns of the Na+-K+-Cl(-) cotransporter (NKCC) 1 and NKCC2, and the Na+-Cl(-) cotransporter (NCC) in the rat lens and to determine if they play a role in regulating lens volume and transparency. RT-PCR was performed on RNA extracted from fiber cells to identify sodium dependent cotransporters expressed in the rat lens. Western blotting and immunohistochemistry, using NKCC1, NKCC2, and NCC antibodies, were used to verify expression at the protein level and to localize transporter expression. Organ cultured rat lenses were incubated in Artificial Aqueous Humor (AAH) of varying osmolarities or isotonic AAH that contained either the NKCC specific inhibitor bumetanide, or the NCC specific inhibitor thiazide for up to 18 h. Lens transparency was monitored with dark field microscopy, while tissue morphology and antibody labeling patterns were recorded using a confocal microscope. Molecular experiments showed that NKCC1 and NCC were expressed in the lens at both the transcript and protein levels, but NKCC2 was not. Immunohistochemistry showed that both NKCC1 and NCC were expressed in the lens cortex, but NCC expression was also found in the lens core. In the lens cortex the majority of labeling for both transporters was cytoplasmic in nature, while in the lens core, NCC labeling was associated with the membrane. Exposure of lenses to either hypotonic or hypertonic AAH had no noticeable effects on the predominantly cytoplasmic location of either transporter in the lens cortex. Incubation of lenses in isotonic AAH plus the NKCC inhibitor bumetanide for 18 h induced a cortical opacity that was initiated by a shrinkage of peripheral fiber cells and the dilation of the extracellular space between fiber cells in a deeper zone located some approximately 150 microm in from the capsule. In contrast, lenses incubated in isotonic AAH and the NCC inhibitor thiazide maintained both their transparency and their regular fiber cell morphology. We have

  14. Study on Titanium Nitride Film Modified for Intraocular Lens

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Objective:To study the characteristics of the intraocular lens using ion beam sputtering depositing titanium nitride thin film on the intraocular lens(IOLs).Methods:To deposite titanium nitride thin film on the top of intraocular lens by ion beam sputtering depositing.We analyzed the surface morphology of intraocular lens through SEM and AFM.We detected intraocular lens resolution through the measurement of intraocular lens.Biocompatibility of intraocular lens is preliminary evaluated in this test.Results:T...

  15. Lens Coupled Quantum Cascade Laser

    Science.gov (United States)

    Hu, Qing (Inventor); Lee, Alan Wei Min (Inventor)

    2013-01-01

    Terahertz quantum cascade (QC) devices are disclosed that can operate, e.g., in a range of about 1 THz to about 10 THz. In some embodiments, QC lasers are disclosed in which an optical element (e.g., a lens) is coupled to an output facet of the laser's active region to enhance coupling of the lasing radiation from the active region to an external environment. In other embodiments, terahertz amplifier and tunable terahertz QC lasers are disclosed.

  16. Fresnel Lens with Embedded Vortices

    Directory of Open Access Journals (Sweden)

    Sunil Vyas

    2012-01-01

    Full Text Available Vortices of different charges are embedded in a wavefront that has quadratic phase variation, and the intensity distribution near the focal plane is studied. This method may be useful in realizing complicated beam profiles. We have experimentally demonstrated the generation of vortex arrays having integer as well as fractional topological charges that produce different intensity profiles at the focal plane. The phase variation realized on a spatial light modulator (SLM acts as a Fresnel lens with embedded vortices.

  17. Symmetrical optical imaging system with bionic variable-focus lens for off-axis aberration correction

    Science.gov (United States)

    Wang, Xuan-Yin; Du, Jia-Wei; Zhu, Shi-Qiang

    2017-09-01

    A bionic variable-focus lens with symmetrical layered structure was designed to mimic the crystalline lens. An optical imaging system based on this lens and with a symmetrical structure that mimics the human eye structure was proposed. The refractive index of the bionic variable-focus lens increases from outside to inside. The two PDMS lenses with a certain thickness were designed to improve the optical performance of the optical imaging system and minimise the gravity effect of liquid. The paper presents the overall structure of the optical imaging system and the detailed description of the bionic variable-focus lens. By pumping liquid in or out of the cavity, the surface curvatures of the rear PDMS lens were varied, resulting in a change in the focal length. The focal length range of the optical imaging system was 20.71-24.87 mm. The optical performance of the optical imaging system was evaluated by imaging experiments and analysed by ray tracing simulations. On the basis of test and simulation results, the optical performance of the system was quite satisfactory. Off-axis aberrations were well corrected, and the image quality was greatly improved.

  18. Contact lens wear is intrinsically inflammatory.

    Science.gov (United States)

    Efron, Nathan

    2017-01-01

    Eye-care practitioners typically associate ocular inflammation during contact lens wear with serious complications such as microbial keratitis; however, more subtle mechanisms may be at play. This paper tests the notion that contact lens wear is intrinsically inflammatory by exploring whether uncomplicated contact lens wear meets the classical, clinical definition of inflammation - rubor (redness), calor (heat), tumor (swelling), dolor (pain) and functio laesa (loss of function) - as well as the contemporary, sub-clinical definition of inflammation (cellular and biochemical reactions). It is demonstrated that all of these clinical and sub-clinical criteria are met with hydrogel lens wear and most are met with silicone hydrogel lens wear, indicating that uncomplicated contact lens wear is intrinsically inflammatory. Consideration of both traditional and contemporary thinking about the role of inflammation in the human body leads to the perhaps surprising conclusion that the chronic, low grade, sub-clinical inflammatory status of the anterior eye during contact lens wear, which may be termed 'para-inflammation', is a positive, protective phenomenon, whereby up-regulation of the immune system, in a non-damaging way, maintains the eye in a state of 'heightened alert', ready to ward off any extrinsic noxious challenge. Characterisation of this inflammatory status may lead to the development of lens engineering or pharmacological strategies to modulate contact lens-induced inflammation, so as to render lens wear more safe and comfortable. © 2016 Optometry Australia.

  19. Characterization of novel lactoferrin loaded capsules prepared with polyelectrolyte complexes.

    Science.gov (United States)

    Wu, Qing-Xi; Zhang, Qi-Lei; Lin, Dong-Qiang; Yao, Shan-Jing

    2013-10-15

    Novel capsules loaded with lactoferrin (LF) were prepared using polyelectrolyte complexes that were formed by water soluble chitosan (WSC), sodium cellulose sulfate (NaCS) and sodium polyphosphate (PPS). Normal chitosan (soluble in acidic conditions) was chosen as a control to prepare similar capsules with NaCS and PPS. (1)H NMR and FTIR spectra analysis showed that WSC was in a form of chitosan hydrochloride which can be directly dissolved and protonated in acid-free water. SEM results showed that the capsules had a typical wall-capsule structure with a regular spherical shape and an average diameter of 1.97 mm. TGA studies revealed that the thermal stability of the capsules were enhanced and the moisture content of the drug-free/loaded capsules were 6.3% and 3.2%. SDS-PAGE results showed that the primary structures of the processed LF in the capsules were unchanged. Drug loading (LE%) and encapsulation efficiency (EE%) analysis showed that the capsules had a higher LE% (45.6%) and EE% (70.7%) than that of the control. In vitro release studies showed that the capsules had a regular and sustainable release profiles in simulated colonic fluid. All of these results indicated that the capsules prepared could be used as a candidate protein drug carrier for colon. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. Basic ammonothermal GaN growth in molybdenum capsules

    Science.gov (United States)

    Pimputkar, S.; Speck, J. S.; Nakamura, S.

    2016-12-01

    Single crystal, bulk gallium nitride (GaN) crystals were grown using the basic ammonothermal method in a high purity growth environment created using a non-hermetically sealed molybdenum (Mo) capsule and compared to growths performed in a similarly designed silver (Ag) capsule and capsule-free René 41 autoclave. Secondary ion mass spectrometry (SIMS) analysis revealed transition metal free (<1×1017 cm-3) GaN crystals. Anomalously low oxygen concentrations ((2-6)×1018 cm-3) were measured in a {0001} seeded crystal boule grown using a Mo capsule, despite higher source material oxygen concentrations ((1-5)×1019 cm-3) suggesting that molybdenum (or molybdenum nitrides) may act to getter oxygen under certain conditions. Total system pressure profiles from growth runs in a Mo capsule system were comparable to those without a capsule, with pressures peaking within 2 days and slowly decaying due to hydrogen diffusional losses. Measured Mo capsule GaN growth rates were comparable to un-optimized growth rates in capsule-free systems and appreciably slower than in Ag-capsule systems. Crystal quality replicated that of the GaN seed crystals for all capsule conditions, with high quality growth occurring on the (0001) Ga-face. Optical absorption and impurity concentration characterization suggests reduced concentrations of hydrogenated gallium vacancies (VGa-Hx).

  1. Ophthalmic drug delivery utilizing two-photon absorption: a novel approach to treat posterior capsule opacification

    Science.gov (United States)

    Kim, H.-C.; Träger, J.; Zorn, M.; Haberkorn, N.; Hampp, N.

    2007-07-01

    Intraocular lens (IOL) implantation is the standard technique to treat cataract. Despite recent progress in surgical procedures, posterior capsule opacification is one of the sill remaining postoperative complications of cataract surgery. We present a novel strategy to reduce the incidence of posterior capsule opacification. A drug delivery polymer suitable for manufacturing intraocular lenses has been developed which enables repeated drug release in a non-invasive and controlled manner. The therapeutic molecules are attached through a UV light sensitive linkage to the polymer backbone which is mainly responsible for the optical properties of the intraocular lenses. However, UV light can not trigger the release of drug from the polymer due to the high absorption of the cornea. We developed linkers which enable drug release by two-photon absorption induced cleavage of the linker structure. Since the two-photon absorption requires high photon densities, this does not occur in ambient light conditions in daily life, but is easily triggered by focused laser beams from a pulsed laser. In this proof-of-principle study we have employed a cyclobutane type linker and investigated the properties of the therapeutic system with the approved drugs 5-fluorouracil and chlorambucil. The controlled drug delivery was successfully demonstrated in vitro and additional cell tests confirmed that the device itself shows no cytotoxicity until photochemical activation. This presented concept can provide a powerful method in ophthalmic drug delivery.

  2. Education and "Thick" Epistemology

    Science.gov (United States)

    Kotzee, Ben

    2011-01-01

    In this essay Ben Kotzee addresses the implications of Bernard Williams's distinction between "thick" and "thin" concepts in ethics for epistemology and for education. Kotzee holds that, as in the case of ethics, one may distinguish between "thick" and "thin" concepts of epistemology and, further, that this distinction points to the importance of…

  3. Thick film hydrogen sensor

    Science.gov (United States)

    Hoffheins, Barbara S.; Lauf, Robert J.

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  4. Alignment and Testing of a Telecentric Zoom Lens Used for the Cygnus X-ray Source

    Energy Technology Data Exchange (ETDEWEB)

    Malone, R. M. [NSTec; Baker, S. A. [NSTec; Brown, K. K. [NSTec; Castaneda, J. J. [NSTec; Curtis, A. H. [NSTec; Danielson, J. [NSTec; Droemer, D. W. [NSTec; Esquibel, D. L. [NSTec; Haines, T. J. [LANL; Hollabaugh, J. S. [NSTec; Howe, R. A. [NSTec; Huerta, J. A. [NSTec; King, N. S. P. [LANL; Lutz, S. S. [NSTec; Kaufman, M. I. [NSTec; McGillivray, K. D. [NSTec; Smith, A. D. [NSTec; Stokes, B. M. [NSTec; Tibbitts, A. [NSTec

    2013-09-01

    Cygnus is a high-energy radiographic x-ray source. Three large zoom lenses have been assembled to collect images from large scintillators. A large elliptical pellicle (394 × 280 mm) deflects the scintillator light out of the x-ray path into an eleven-element zoom lens coupled to a CCD camera. The zoom lens and CCD must be as close as possible to the scintillator to maximize light collection. A telecentric lens design minimizes image blur from a volume source. To maximize the resolution of objects of different sizes, the scintillator and zoom lens are translated along the x-ray axis, and the zoom lens magnification changes. Zoom magnification is also changed when different-sized recording cameras are used (50 or 62 mm square format). The LYSO scintillator measures 200 × 200 mm and is 5 mm thick. The scintillator produces blue light peaking at 435 nm, so special lens materials are required. By swapping out one doublet and allowing all other lenses to be repositioned, the zoom lens can also use a CsI(Tl) scintillator that produces green light centered at 540 nm (for future operations). All lenses have an anti-reflective coating for both wavelength bands. Two sets of doublets, the stop, the scintillator, and the CCD camera move during zoom operations. One doublet has x-y compensation. Alignment of the optical elements was accomplished using counter propagating laser beams and monitoring the retro-reflections and steering collections of laser spots. Each zoom lens uses 60 lb of glass inside the 425 lb mechanical structure, and can be used in either vertical or horizontal orientation.

  5. Modified posterior-assisted levitation with intraocular lens scaffold and glued IOL for sinking nucleus in eyes with inadequate sulcus support.

    Science.gov (United States)

    Narang, Priya; Agarwal, Amar

    2017-07-01

    Posterior-assisted levitation is used to retrieve and levitate a sinking nucleus in cataract surgery associated with posterior capsule rupture. After the nucleus is levitated in the anterior chamber, the intraocular lens (IOL) scaffold procedure helps emulsify the nuclear remnants with the phacoemulsification probe and glue-assisted intrascleral haptic fixation (glued IOL) enables appropriate placement of an IOL in cases with insufficient capsule support. We describe a triumvirate procedure for a sinking nucleus in the absence of capsule support that combines modified posterior-assisted levitation, in which the nucleus is levitated from the existing sclerotomy sites of glued IOL surgery, with the IOL scaffold technique, enabling a closed-chamber approach when performed concurrently. Copyright © 2017 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  6. Changes on the corneal thickness and curvature after orthokeratology

    Science.gov (United States)

    Mitsui, Iwane; Yamada, Yoshiya

    2004-07-01

    To evaluate the corneal thickness and curvature changes after Orthokeratology contact lens wear, using the ORBSCAN II corneal topography system, corneal thickness and corneal curvature were measured on one hundred and twenty eyes of sixty patients before and after wearing the custom rigid gas permeable contact lenses for Orthokeratology. The contact lenses were specially designed for each eye. The subjects wore the orthokeratology lenses for approximately Four hours with their eyes closed. The corneal thickness of the subjects was increased on fifty-five eyes at not only the peripheral zone but also the center of the cornea. The average increase of central and peripheral corneal thickness was 18 micrometer and 22micrometer, respectively. The mean anterior curvature of corneal surface changed 1.25D. The mean posterior curvature of corneal endothelium side changed 0.75D.

  7. Capsule formation and asymbiotic seed germination in some hybrids of Phalaenopsis, influenced by pollination season and capsule maturity.

    Science.gov (United States)

    Balilashaki, Khosro; Gantait, Saikat; Naderi, Roohangiz; Vahedi, Maryam

    2015-07-01

    We explored the influence of pollination season and maturity of capsule on post-pollination capsule formation and in vitro asymbiotic seed germination, respectively. Three Phalaenopsis orchid hybrids, namely, 'Athens', 'Moscow' and 'Lusaka' flowers were artificially self-pollinated during winter, spring, summer and fall seasons and the impact of the pollination seasons was evident during capsule formation. It was observed that winter was the most suitable season for pollination of all the three Phalanaeopsis hybrids resulting in 80-88 % capsule formation. During summer, the pollination success rate was 24-28 %, but resulted in successful capsule formation. Season of pollination further delimited the germination efficiency of seeds harvested from capsules of variable maturity levels. Invariably, seeds collected from winter-pollinated capsules performed best in germination compared to other seasons, for instance, 'Moscow' seeds took less than 14 days to germinate from capsules developed following winter-pollination. Regarding the influence of capsule maturity on seed germination, we observed that seeds derived from 5-month mature capsules, invariably took least time to germinate than that of the 3-month or 7-month in all three hybrids, e.g., for 'Moscow' it was 13.9 days with a maximum of 90.3 % germination.

  8. TGF-β1 serum concentrations and receptor expressions in the lens capsular of dogs with diabetes mellitus

    Science.gov (United States)

    Neumann, Stephan; Linek, Jens; Loesenbeck, Gerhard; Schüttler, Julia; Gaedke, Sonja

    2017-01-01

    Tissue fibrosis as complication of diabetes mellitus is known in humans. Because TGF-β1induces fibrosis and is elevated in humans suffering from diabetes mellitus we measured this growth factor in serum of dogs with diabetes mellitus and compared it with healthy dogs and those with fibrotic diseases. Further we measured the expression of TGF-β1receptor on lens capsule to investigate possible association between diabetes mellitus and cataract associated alterations. TGF-β1 was measured in serum of 12 dogs with diabetes mellitus, 20 healthy controls and 12 dogs with fibrotic diseases. Dogs with diabetes mellitus and fibrotic diseases have significantly increased TGF-β1 serum concentrations compared to healthy controls. Some dogs with diabetes mellitus showed increased expression of TGF-β1 receptor in lens capsule. Based on our observations we can conclude that TGF-β1 elevation in dogs with diabetes mellitus may induces complications of the disease and may participates on lens alteration. PMID:28180095

  9. Foveal thickness after phacoemulsification as measured by optical coherence tomography

    Directory of Open Access Journals (Sweden)

    Gerasimos Th Georgopoulos

    2008-08-01

    Full Text Available Gerasimos Th Georgopoulos, Dimitrios Papaconstantinou, Maria Niskopoulou, Marilita Moschos, Ilias Georgalas, Chrysanthi KoutsandreaGlaucoma Department, Medical School, Athens University, Athens, GreeceBackground: Despite a significant body of research, no consistency on postoperative foveal thickness as measured by optical coherence tomography (OCT, can be recorded. The purpose of our study was to evaluate the effect of uncomplicated cataract surgery in the thickness of the retina in the foveal area during the early postoperative period.Methods: In a prospective study, 79 eyes were assessed by OCT, on day 1, and weeks 2 and 4 after uncomplicated phacoemulsification with intraocular lens implantation in the Athens University Clinic. The outcome measure was the thickness of the retina in the foveal area.Results: The thickness of the retina preoperatively is significantly smaller (150.4 ± 18.8 (p < 0.05 than the thickness of the retina on day 1 (171.8 ± 21 and week 2 (159.7 ± 19 and returned to the initial levels on week 4 (152 ± 17.1. The estimated correlation coefficients between preoperative and postoperative thickness of the retina were significant (p < 0.05. Conversely, no association was found between postoperative visual acuity and thickness of the retina, neither between the phacoemulsification energy and retinal thickness. Operation time, although inversely related with postoperative visual acuity, was not associated with the thickness of the retina.Conclusions: Following phacoemulsification, an increase in the foveal thickness was detected in the early postoperative period, quantified and followed up by OCT. The foveal thickness returned to the preoperative level, 1 month following surgery in our study. No association was shown between intraoperative parameters and increased postoperative retinal thickness.Keywords: optical coherence tomography, phacoemulsification, retinal thickness

  10. Evolution of a pre and post lens tear film with a contact lens

    Science.gov (United States)

    Gerhart, Matthew; Anderson, Daniel

    2012-11-01

    The work is the development, implementation, and analysis of a two-dimensional tear film model including a porous contact lens. The geometry of the problem is: a pre-lens layer that is a thin tear film between the outside air and contact lens, a contact lens that is a rigid but movable porous substrate, and a post-lens layer that is a thin film layer between the contact lens and the cornea. We are looking at short and long term behavior of the evolution of the thin film in the pre-lens layer coupled with the porous layer and the thin squeeze film in the post-lens layer. We model the different behaviors that arise as the Darcy number, evaporation effects, and boundary flux conditions change.

  11. Comprehensive and Systematic Analysis of the Immunocompatibility of Polyelectrolyte Capsules.

    Science.gov (United States)

    Zyuzin, Mikhail V; Díez, Paula; Goldsmith, Meir; Carregal-Romero, Susana; Teodosio, Cristina; Rejman, Joanna; Feliu, Neus; Escudero, Alberto; Almendral, María Jesús; Linne, Uwe; Peer, Dan; Fuentes, Manuel; Parak, Wolfgang J

    2017-02-15

    The immunocompability of polyelectrolyte capsules synthesized by layer-by-layer deposition has been investigated. Capsules of different architecture and composed of either non-degradable or biodegradable polymers, with either positively or negatively charged outer surface, and with micrometer size, have been used, and the capsule uptake by different cell lines has been studied and quantified. Immunocompatibility studies were performed with peripheral blood mononuclear cells (PBMCs). Data demonstrate that incubation with capsules, at concentrations relevant for practical applications, did not result in a reduced viability of cells, as it did not show an increased apoptosis. Presence of capsules also did not result in an increased expression of TNF-α, as detected with antibody staining, as well as at mRNA level. It also did not result in increased expression of IL-6, as detected at mRNA level. These results indicate that the polyelectrolyte capsules used in this study are immunocompatible.

  12. The motion of a deforming capsule through a corner

    CERN Document Server

    Zhu, Lailai

    2014-01-01

    A three-dimensional deformable capsule convected through a channel/duct with a corner is studied via numerical simulations using an accelerated boundary integral method adapted to general geometries. A global spectral method is adopted to resolve the dynamics of the capsule's membrane developing elastic tensions according to the Neo-Hookean constitutive law and bending moments in an inertialess flow. The simulations show that the trajectory of the capsule closely follows the underlying streamlines and the deformation of the capsule induces an anti-clockwise rotation of its material points with respect to the travelling direction. The surface area, principle tension and elastic energy of the capsule increase around the corner. Their temporal evolutions are characterised by a clear phase delay and the loss of time-reversal symmetry of Stokes flow due to the elasticity of membrane. The capsule centroid velocity decreases approaching the corner as the mean flow does while a velocity overshoot is observed past the...

  13. Expanding role of capsule endoscopy in inflammatory bowel disease

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Capsule endoscopy has been shown to detect small bowel inflammatory changes better than any other imaging modality. Selection criteria have been optimized to increase the yield of capsule endoscopy in patients suspected to have Crohn's disease. Capsule endoscopy allows for earlier diagnosis of Crohn's disease of the small bowel and improved diagnosis of colitis in patients where it is unclear if they suffer from Crohn's or ulcerative colitis. A test capsule is available to assess for small bowel strictures and thus avoid capsule retention. A common language has been developed and a new scoring index will be added to capsule software. It is envisioned that the manner in which we treat Crohn's disease in the future will change, based on earlier diagnosis and treatment aimed at mucosal healing rather than symptom improvement.

  14. Polar tent for reduced perturbation of NIF ignition capsules

    Science.gov (United States)

    Hammel, B. A.; Pickworth, L.; Stadermann, M.; Field, J.; Robey, H.; Scott, H. A.; Smalyuk, V.

    2016-10-01

    In simulations, a tent that contacts the capsule near the poles and departs tangential to the capsule surface greatly reduces the capsule perturbation, and the resulting mass injected into the hot-spot, compared to current capsule support methods. Target fabrication appears feasible with a layered tent (43-nm polyimide + 8-nm C) for increased stiffness. We are planning quantitative measurements of the resulting shell- ρR perturbation near peak implosion velocity (PV) using enhanced self-emission backlighting, achieved by adding 1% Ar to the capsule fill in Symcaps (4He + H). Layered DT implosions are also planned for an integrated test of capsule performance. We will describe the design and simulation predictions. Prepared by LLNL under Contract DE-AC52-07NA27344.

  15. Analysis Of Wetted-Foam ICF Capsule Perormance

    Science.gov (United States)

    Peterson, R.; Olson, R.; Zylstra, A.; Haines, B.; Yi, A.; Bradley, P.; Yin, L.; Leeper, R.; Kline, J.

    2016-10-01

    The performance of wetted-foam ICF capsules is investigated with the RAGE Eulerian radiation-hydrodynamics computer code. We are developing an experimental platform on NIF that employs a wetted foam liquid DT fuel layer ICF capsules. By varying the capsule temperature, the vapor density in the capsule can be prescribed, and the hot spot convergence ratio (CR) of the capsule implosion can be controlled. This allows us to investigate the fidelity of RAGE in modeling of capsule implosions as the value of CR is varied. In the NIF experiments, CR can be varied from 12 to 25. This presentation will cover simulations with RAGE of three NIF shots performed in 2016; a DD and a DT liquid fuel shot with CR =14 and a DT shot with CR =16. It will also discuss analysis of future experiments. This work was performed under auspices of the U. S. DOE by LANL.

  16. Gelatin and Non-Gelatin Capsule Dosage Forms.

    Science.gov (United States)

    Gullapalli, Rampurna P; Mazzitelli, Carolyn L

    2017-06-01

    Capsules offer an alternate to tablets for oral delivery of therapeutic compounds. One advantage of capsules over tablets is their amenability to deliver not only solids but also nonaqueous liquids and semisolids as a unit dose solid dosage form. Shell component is an essential part of capsule dosage forms. Capsule shells, available as hard or soft shells, are formulated from gelatin or a non-gelatin polymeric material such as hypromellose and starch, water, and with or without a nonvolatile plasticizer. The capsule shells may also be formulated to modify the release of their fill contents in a site-specific manner in the gastrointestinal tract. The goal of the current review is to provide an in-depth discussion on polymeric film-forming materials and manufacturing technologies used in the production of capsule shells. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  17. Capsule development and utilization for material irradiation tests

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Young Hwan; Kim, B. G.; Joo, K. N. [and others

    2000-05-01

    The development program of advanced nuclear structural and fuel materials includes the in-pile tests using the instrumented capsule at HANARO. The tests were performed in the in-core test holes of CT, IR 1 and 2 and OR 4 and 5 of HANARO. Extensive efforts have also been made to establish design and manufacturing technology for the instrumented capsule and its related system, which should be compatible with the HANARO's characteristics. Since the first instrumented capsule(97M-01K) had been designed and successfully fabricated, five tests were done to support the users and provided the economic benefits to user by generating the essential in-pile information on the performance and structural integrity of materials. This paper describes the present status and future plans of these R and D activities for the development of the instrumented capsule including in-situ material property measurement capsules and nuclear fuel test capsules.

  18. Design of a slow-release capsule using laser drilling.

    Science.gov (United States)

    Jain, N K; Naik, S U

    1984-12-01

    Conventional hard gelatin capsules were made GI-tract resistant by formalin vapor treatment. The residual formalin content was 80 micrograms/capsule 24 h after treatment, which decreased with increased storage time. An in vitro GI-tract resistance test was performed by exposing the capsules to simulated gastric fluid for 4 h and then to simulated intestinal fluid for 4 h at 37 degrees C. The resistance was further confirmed by in vivo X-ray studies in human volunteers. Minute pores were drilled on the hardened shells of the capsules with a carbon dioxide gas laser. This permitted the slow passage of the encapsulated tetracycline hydrochloride when subjected to 0.1 M HCl in in vitro dissolution studies. In vitro drug release from these capsules followed zero-order kinetics after an initial lag period of 30 min. The factors influencing the in vitro release rate of tetracycline hydrochloride from these capsules are discussed.

  19. Lateral shear interferometry with holo shear lens

    Science.gov (United States)

    Joenathan, C.; Mohanty, R. K.; Sirohi, R. S.

    1984-12-01

    A simple method for obtaining lateral shear using holo shear lenses (HSL) has been discussed. This simple device which produces lateral shears in the orthogonal directions has been used for lens testing. The holo shear lens is placed at or near the focus of the lens to be tested. It has also been shown that HSL can be used in speckle shear interferometry as it performs both the functions of shearing and imaging.

  20. An inverse and analytic lens design method

    OpenAIRE

    Lu, Yang; Lakshminarayanan, Vasudevan

    2016-01-01

    Traditional lens design is a numerical and forward process based on ray tracing and aberration theory. This method has limitations because the initial configuration of the lens has to be specified and the aberrations of the lenses have to considered. This paper is an initial attempt to investigate an analytic and inverse lens design method, called Lagrange, to overcome these barriers. Lagrange method tries to build differential equations in terms of the system parameters and the system input ...

  1. Numerical Simulation of a Thermal-Protection Element of a Promising Reusable Capsule-Type Lander

    Science.gov (United States)

    Prosuntsov, P. V.; Shulyakovskii, A. V.; Taraskin, N. Yu.

    2017-01-01

    An indestructible multilayer thermal-barrier coating is proposed for a promising reusable capsule-type lander. This coating is based on a porous carbon-ceramic material. The thermal state of the coating proposed was simulated mathematically for different types of its reinforcement and different values of the porosity and the heat-conductivity coefficient of the carbon-ceramic material. Results of a numerical simulation of the temperature state of an element of the multilayer thermal-barrier coating are presented. On the basis of these data, the thickness and the weight efficiency of the coating were estimated.

  2. Accommodation-Amplitudes following an Accommodative Lens Refilling Procedure — an in vivo Update

    Science.gov (United States)

    Nishi, Okihiro; Nishi, Yutaro; Chang, S.; Nishi, Kayo

    2014-01-01

    Purpose To investigate whether a newly developed lens refilling procedure can provide some accommodation in monkey eyes and to evaluate the difference in accommodation with different degrees of capsular bag refilling. Setting Jinshikai Medical Foundation, Nishi Eye Hospital, Osaka, Japan. Design Experimental monkey study. Methods Following a central 3–4 mm continuous curvilinear capsulorhexis, phacoemulsification was performed in the usual manner. A novel accommodative membrane intraocular lens for sealing capsular opening was implanted into the capsular bag. Silicone polymers were injected beneath the intraocular lens into the capsular bag through the delivery hole. In three study groups, each with six monkey eyes, the lens capsule was refilled with 0.08 ml corresponding to 65% bag volume, 0.1 ml corresponding to 80% bag volume, and 0.125 ml of silicone polymers corresponding to 100% bag volume, respectively. To calculate the accommodation-amplitudes achieved, automated refractometry was performed before and 1 hour after the topical 4% pilocarpine application before and four weeks after surgery. Results The refilling technique was successful in all monkeys without polymer leakage. Accommodation-amplitudes attained were 2.56 ± 0.74 dioptries (D), 2.42 ± 1.00D, and 2.71 ± 0.63D, respectively, 4 weeks after surgery in the three study groups. Conclusions Using the technique, some accommodation could be obtained in the young monkey eyes. Leakage of the injectable silicone polymer and anterior capsular opacification at least in the visual axis could be avoided. The results suggest that this lens refilling procedure warrants further studies for a possible clinical application. PMID:24461501

  3. Vitreoretinal Surgery for Intraocular Lens Dislocated into the Vitreous Cavity

    Directory of Open Access Journals (Sweden)

    Dilek Özçelik Soba

    2015-04-01

    Full Text Available Objectives: To investigate the sex, age, accompanying eye examination findings, and the outcomes of vitreoretinal surgery (VRS for intraocular lens (IOL dislocated into the vitreous cavity. Materials and Methods: The medical records of 30 patients who underwent VRS for IOL dislocation into the vitreous cavity were retrospectively analyzed in this study. Preoperative and postoperative visual acuity, intraocular pressure, biomicroscopic, and posterior segment examination findings were assessed. Results: The average age of the patients was 63.1 (range: 38-83 years. Twenty-one patients were male (70% and 9 patients were female (30%. As etiologic causes, 18 cases (60% had late spontaneous dislocation, 5 cases (16.6% had dislocation after phacoemulsification surgery, 4 cases (13.3% had trauma, 2 cases (6.6% had previously undergone vitrectomy, and 1 case (3.3% had undergone YAG laser capsulotomy. VRS including 23-gauge triamcinolone-assisted pars plana vitrectomy, intraocular lens extraction, posterior hyaloid membrane removing, endolaser photocoagulation, and fluid-air exchange was performed. Posterior chamber IOL implantation on to the anterior capsule in 13 cases (43.3%, anterior chamber IOL implantation in 10 cases (33.3%, and scleral fixated posterior IOL implantation in 4 cases (13.3% were performed. The corrected visual acuity recorded at the last follow-up was better than the first visit in 23 cases (76.6%, the same in 5 eyes (16.6%, and worse in 2 eyes (6.6%. Conclusion: VRS combined IOL implantation is a successful surgery method for IOL dislocated into the vitreous cavity and can avoid poor visual outcomes. (Turk J Ophthalmol 2015; 45: 56-9

  4. Multiple internalization pathways of polyelectrolyte multilayer capsules into mammalian cells.

    Science.gov (United States)

    Kastl, Lena; Sasse, Daniel; Wulf, Verena; Hartmann, Raimo; Mircheski, Josif; Ranke, Christiane; Carregal-Romero, Susana; Martínez-López, José Antonio; Fernández-Chacón, Rafael; Parak, Wolfgang J; Elsasser, Hans-Peter; Rivera Gil, Pilar

    2013-08-27

    Polyelectrolyte multilayer (PEM) capsules are carrier vehicles with great potential for biomedical applications. With the future aim of designing biocompatible, effective therapeutic delivery systems (e.g., for cancer), the pathway of internalization (uptake and fate) of PEM capsules was investigated. In particular the following experiments were performed: (i) the study of capsule co-localization with established endocytic markers, (ii) switching-off endocytotic pathways with pharmaceutical/chemical inhibitors, and (iii) characterization and quantification of capsule uptake with confocal and electron microscopy. As result, capsules co-localized with lipid rafts and with phagolysosomes, but not with other endocytic vesicles. Chemical interference of endocytosis with chemical blockers indicated that PEM capsules enter the investigated cell lines through a mechanism slightly sensitive to electrostatic interactions, independent of clathrin and caveolae, and strongly dependent on cholesterol-rich domains and organelle acidification. Microscopic characterization of cells during capsule uptake showed the formation of phagocytic cups (vesicles) to engulf the capsules, an increased number of mitochondria, and a final localization in the perinuclear cytoplasma. Combining all these indicators we conclude that PEM capsule internalization in general occurs as a combination of different sequential mechanisms. Initially, an adsorptive mechanism due to strong electrostatic interactions governs the stabilization of the capsules at the cell surface. Membrane ruffling and filopodia extensions are responsible for capsule engulfing through the formation of a phagocytic cup. Co-localization with lipid raft domains activates the cell to initiate a lipid-raft-mediated macropinocytosis. Internalization vesicles are very acidic and co-localize only with phagolysosome markers, excluding caveolin-mediated pathways and indicating that upon phagocytosis the capsules are sorted to

  5. Multicomposite ultrathin capsules for sustained ocular delivery of ciprofloxacin hydrochloride.

    Science.gov (United States)

    Bhadra, Dipankar; Gupta, Girish; Bhadra, Sulekha; Umamaheshwari, R B; Jain, Narendra

    2004-07-16

    The present work is intended to develop a sustained bioadhesive drug delivery system for delivery of Ciprofloxacin Hydrochloride in Cul-de-Sac for sustained and effective antimicrobial chemotherapy. For this, ultrathin multicomposite capsular systems were selected. Multicomposite ultrathin capsules are molecular assemblies of tailored architecture having layer-by-layer adsorption of oppositely charged macromolecules onto colloidal particles. In the present study colloidal calcium phosphate core and gluateraldehyde fixed RBCs were used as core on which alginate (-vely charged) and polyallylamine hydrochloride (+vely charged) polyelectrolyte coating was deposited alternatively upto 10th layer. The coating in each subsequent layer was determined by changes in zeta potential. Ciprofloxacin hydrochloride was loaded in the capsules by incubation with the capsules suspended in phosphate buffer saline pH 7.4. The cores of the capsules were then removed by treatment with 0.1N HCl for calcium phosphate core and by sodium hypochlorite for RBC cored capsules. The hollow ciprofloxacin HCl loaded capsules were the evaluated in-vitro for pattern of layer-by-layer drug loading, drug release, stability at various temperatures and ionic concentrations and corneal retention. The core removal process was found to have minimal effects on drug loading in capsules. The drug loading was found to be higher for RBC cored hollow capsules and hence release rate was lower as compared to calcium cored hollow capsules. Draize test for corneal irritancy proved that the capsules were not irritating. The capsules were found to deliver the ciprofloxacin in cul-de-sac of rabbit's eyes for prolonged period. Based on corneal retention studies and tear drug concentration, the capsules can be considered for suitable and safe use for sustained ocular delivery of drugs.

  6. Algorithm design of liquid lens inspection system

    Science.gov (United States)

    Hsieh, Lu-Lin; Wang, Chun-Chieh

    2008-08-01

    In mobile lens domain, the glass lens is often to be applied in high-resolution requirement situation; but the glass zoom lens needs to be collocated with movable machinery and voice-coil motor, which usually arises some space limits in minimum design. In high level molding component technology development, the appearance of liquid lens has become the focus of mobile phone and digital camera companies. The liquid lens sets with solid optical lens and driving circuit has replaced the original components. As a result, the volume requirement is decreased to merely 50% of the original design. Besides, with the high focus adjusting speed, low energy requirement, high durability, and low-cost manufacturing process, the liquid lens shows advantages in the competitive market. In the past, authors only need to inspect the scrape defect made by external force for the glass lens. As to the liquid lens, authors need to inspect the state of four different structural layers due to the different design and structure. In this paper, authors apply machine vision and digital image processing technology to administer inspections in the particular layer according to the needs of users. According to our experiment results, the algorithm proposed can automatically delete non-focus background, extract the region of interest, find out and analyze the defects efficiently in the particular layer. In the future, authors will combine the algorithm of the system with automatic-focus technology to implement the inside inspection based on the product inspective demands.

  7. A Magnification Lens for Interactive Volume Visualization

    Energy Technology Data Exchange (ETDEWEB)

    LaMar, E; Hamann, B; Joy, K I

    2001-07-19

    Volume visualization of large data sets suffers from the same problem that many other visualization modalities suffer from: either one can visualize the entire data set and lose small details or visualize a small region and lose the context. In this paper, they present a magnification lens technique for volume visualization. While the notion of a magnification-lens is not new, and other techniques attempt to simulate the physical properties of a magnifying lens, their contribution is in developing a magnification lens that is fast, can be implemented using a fairly small software overhead, and has a natural, intuitive appearance. The issue with magnification lens is the border, or transition, region. The lens center and exterior have a constant zoom factor, and are simple to render. It is the border region that blends between the external and interior magnification, and has a non-constant magnification. They use the perspective-correct textures capability, available in most current graphics systems, to produce a lens with a tessellated border region that approximates linear compression with respect to the radius of the magnification lens. They discuss how a cubic border can mitigate the discontinuities resulting from the use of a linear function, without significant performance loss. They discuss various issues concerning development of a three-dimensional magnification lens.

  8. Trends of contact lens prescribing in Jordan.

    Science.gov (United States)

    Haddad, Mera F; Bakkar, May; Gammoh, Yazan; Morgan, Philip

    2016-10-01

    To evaluate contact lens prescribing trends among optometrists in Jordan. Optometrists from 173 practices in Jordan were surveyed about prescribing contact lenses in their practice. Practitioners were required to record information for the last 10 patients that visited their practice. Demographic data such as age and gender was obtained for each patient. In addition, data relating to lens type, lens design, replacement methods and the care regime advised to each patient were recorded. Practitioners were required to provide information relating to their education and years of experience. The influence of education and experience with respect to lens prescribing trends was explored using linear regression models for the proportions of lens types fitted for patients. A total of 1730 contact lens fits were analyzed. The mean (±SD) age of lens wearers was 26.6 (±7.9) years, of whom 65% were female. Conventional hydrogel lenses were the most prescribed lenses, accounting for 60.3% of the fits, followed by silicone hydrogel lenses (31.3%), and rigid lenses (8.4%). In terms of lens design, spherical lenses appeared to be most commonly prescribed on monthly basis. Daily disposable lenses were second most prescribed lens modality, accounting for 20.4% of the study sample. Multi-purpose solution (MPS) was the preferred care regimen, with a prevalence of 88.1% reported in the study sample, compared to hydrogen peroxide (1-step and 2-step), which represented only 2.8% of the patients in this study. A relationship was established between the two educational groups for rigid lens prescribing (F=17.4, ptrends among optometrists in Jordan. Contact lens prescribing in terms of lens type, lens design, modality of wear and care regimen agree with global market trends with small variations. This report will help practitioners and the industry to detect any deficiencies in the contact lens market in Jordan, which will ease implementing current and future plans in developing contact

  9. 21 CFR 520.1921 - Prochlorperazine, isopropamide, with neomycin sustained-release capsules.

    Science.gov (United States)

    2010-04-01

    ... sustained-release capsules. 520.1921 Section 520.1921 Food and Drugs FOOD AND DRUG ADMINISTRATION... capsules. (a) Specifications. Each capsule contains either: (1) Capsule No. 1: 3.33 milligrams of... base (as the sulfate); or (2) Capsule No. 3: 10 milligrams of prochlorperazine (as the dimaleate), 5...

  10. Hydrodynamic instability measurements in DT-layered ICF capsules using the layered-HGR platform

    Science.gov (United States)

    Weber, C.; Döppner, T.; Casey, D.; Bunn, T.; Carlson, L.; Dylla-Spears, R.; Kozioziemski, B.; MacPhee, A. G.; Sater, J.; Nikroo, A.; Robey, H.; Smalyuk, V.

    2016-05-01

    The first measurements of hydrodynamic instability growth at the fuel-ablator interface in an ICF implosion are reported. Previous instability measurements on the National Ignition Facility have used plastic capsules to measure ablation front Rayleigh-Taylor growth with the Hydro.-Growth Radiography (HGR) platform. These capsules substituted an additional thickness of plastic ablator material in place of the cryogenic layer of Deuterium- Tritium (DT) fuel. The present experiments are the first to include a DT ice layer, which enables measurements of the instability growth occurring at the fuel-ablator interface. Instability growth at the fuel-ablator interface is seeded differently in two independent NIF experiments. In the first case, a perturbation on the outside of the capsule feeds through and grows on the interface. Comparisons to an implosion without a fuel layer produce a measure of the fuel's modulation. In the second case, a modulation was directly machined on the inner ablator before the fuel layer was added. The measurement of growth in these two scenarios are compared to 2D rad-hydro modeling.

  11. A batch fabricated capacitive pressure sensor with an integrated Guyton capsule for interstitial fluid pressure measurement

    Science.gov (United States)

    Maleki, Teimour; Fogle, Benjamin; Ziaie, Babak

    2011-05-01

    In this paper, we present the design, fabrication and test of a batch fabricated capacitive pressure sensor with an integrated Guyton capsule for interstitial fluid pressure measurement. The sensor is composed of 12 µm thick single crystalline silicon membrane and a 3 µm gap, hermetically sealed through silicon-glass anodic bonding. A novel batch scale method for creating electrical feed-throughs inside the sealed capacitor chamber is developed. The Guyton capsule consists of an array of 10 µm diameter access holes etched onto a silicon back-plate separated from the silicon sensing membrane by a gap of 5 µm. The presence of the Guyton capsule (i.e. plates with access holes plus the gap separating them from the sensing membrane) allows for the ingress of interstitial fluid inside the 5 µm gap following the implantation, thus, providing an accurate measurement of interstitial fluid pressure. The fabricated sensor is 3 × 2 × 0.42 mm3 in dimensions and has a maximum sensitivity of 10 fF mmHg-1.

  12. Thin Shell Model for NIF capsule stagnation studies

    Science.gov (United States)

    Hammer, J. H.; Buchoff, M.; Brandon, S.; Field, J. E.; Gaffney, J.; Kritcher, A.; Nora, R. C.; Peterson, J. L.; Spears, B.; Springer, P. T.

    2015-11-01

    We adapt the thin shell model of Ott et al. to asymmetric ICF capsule implosions on NIF. Through much of an implosion, the shell aspect ratio is large so the thin shell approximation is well satisfied. Asymmetric pressure drive is applied using an analytic form for ablation pressure as a function of the x-ray flux, as well as time-dependent 3D drive asymmetry from hohlraum calculations. Since deviations from a sphere are small through peak velocity, we linearize the equations, decompose them by spherical harmonics and solve ODE's for the coefficients. The model gives the shell position, velocity and areal mass variations at the time of peak velocity, near 250 microns radius. The variables are used to initialize 3D rad-hydro calculations with the HYDRA and ARES codes. At link time the cold fuel shell and ablator are each characterized by a density, adiabat and mass. The thickness, position and velocity of each point are taken from the thin shell model. The interior of the shell is filled with a uniform gas density and temperature consistent with the 3/2PV energy found from 1D rad-hydro calculations. 3D linked simulations compare favorably with integrated simulations of the entire implosion. Through generating synthetic diagnostic data, the model offers a method for quickly testing hypothetical sources of asymmetry and comparing with experiment. Prepared by LLNL under Contract DE-AC52-07NA27344.

  13. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    Science.gov (United States)

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal biocompatibility, specifically through the quantification of cell-surface markers of leukocyte activation.

  14. Peripapillary and Macular Choroidal Thickness in Glaucoma

    Directory of Open Access Journals (Sweden)

    Hamid Hosseini

    2014-01-01

    Full Text Available Purpose: To compare choroidal thickness (CT between individuals with and without glaucomatous damage and to explore the association of peripapillary and submacular CT with glaucoma severity using spectral domain optical coherence tomography (SD-OCT. Methods: Ninety-one eyes of 20 normal subjects and 43 glaucoma patients from the UCLA SD-OCT Imaging Study were enrolled. Imaging was performed using Cirrus HDOCT. Choroidal thickness was measured at four predetermined points in the macular and peripapillary regions, and compared between glaucoma and control groups before and after adjusting for potential confounding variables. Results: The average (± standard deviation mean deviation (MD on visual fields was −0.3 (±2.0 dB in controls and −3.5 (±3.5 dB in glaucoma patients. Age, axial length and their interaction were the most significant factors affecting CT on multivariate analysis. Adjusted average CT (corrected for age, axial length, their interaction, gender and lens status however, was not different between glaucoma patients and the control group (P=0.083 except in the temporal parafoveal region (P=0.037; nor was choroidal thickness related to glaucoma severity (r=−0.187, P=0.176 for correlation with MD, r=−0.151, P=0.275 for correlation with average nerve fiber layer thickness. Conclusions: Choroidal thickness of the macular and peripapillary regions is not decreased in glaucoma. Anatomical measurements with SD-OCT do not support the possible influence of the choroid on the pathophysiology of glaucoma.

  15. Capsule shields the function of short bacterial adhesins

    DEFF Research Database (Denmark)

    Schembri, Mark; Dalsgaard, D.; Klemm, Per

    2004-01-01

    Bacterial surface structures such as capsules and adhesins are generally regarded as important virulence factors. Here we demonstrate that capsules block the function of the self-recognizing protein antigen 43 through physical shielding. The phenomenon is not restricted to Escherichia coli but can...... occur in other gram-negative bacteria. Likewise, we show that other short adhesins exemplified by the AIDA-I protein are blocked by the presence of a capsule. The results support the notion that capsule polysaccharides sterically prevent receptor-target recognition of short bacterial adhesins...

  16. The Thermal Hydraulic Test of SFR Irradiation Test Capsule

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chul Yong; Park, Sung Jae; Choo, Kee Nam [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Irradiation test using a capsule has been performed for fuel or material performance test in the test reactor. Irradiation capsule for the HANARO reactor must satisfy the hydraulic conditions and structural integrity from a out-pile test. Items of a out-pile test are pressure drop, flow-induced vibration test and endurance test. The results of test must show that a test capsule satisfy the HANARO operational requirement with sufficient margin. This paper describes the devices of thermal hydraulic test and the results of SFR test capsule

  17. Small intestinal model for electrically propelled capsule endoscopy

    Directory of Open Access Journals (Sweden)

    Woo Sang Hyo

    2011-12-01

    Full Text Available Abstract The aim of this research is to propose a small intestine model for electrically propelled capsule endoscopy. The electrical stimulus can cause contraction of the small intestine and propel the capsule along the lumen. The proposed model considered the drag and friction from the small intestine using a thin walled model and Stokes' drag equation. Further, contraction force from the small intestine was modeled by using regression analysis. From the proposed model, the acceleration and velocity of various exterior shapes of capsule were calculated, and two exterior shapes of capsules were proposed based on the internal volume of the capsules. The proposed capsules were fabricated and animal experiments were conducted. One of the proposed capsules showed an average (SD velocity in forward direction of 2.91 ± 0.99 mm/s and 2.23 ± 0.78 mm/s in the backward direction, which was 5.2 times faster than that obtained in previous research. The proposed model can predict locomotion of the capsule based on various exterior shapes of the capsule.

  18. Fabrication of Single Crystal MgO Capsules

    Science.gov (United States)

    Danielson, Lisa

    2012-01-01

    A method has been developed for machining MgO crystal blocks into forms for containing metallic and silicate liquids at temperatures up to 2,400 C, and pressures up to at least 320 kilobars. Possible custom shapes include tubes, rods, insulators, capsules, and guides. Key differences in this innovative method include drilling along the crystallographic zone axes, use of a vibration minimizing material to secure the workpiece, and constant flushing of material swarf with a cooling medium/lubricant (water). A single crystal MgO block is cut into a section .5 mm thick, 1 cm on a side, using a low-speed saw with a 0.004 blade. The cut is made parallel to the direction of cleavage. The block may be cut to any thickness to achieve the desired length of the piece. To minimize drilling vibrations, the MgO block is mounted on a piece of adhesive putty in a vise. The putty wad cradles the bottom half of the entire block. Diamond coring tools are used to drill the MgO to the desired custom shape, with water used to wet and wash the surface of swarf. Compressed air may also be used to remove swarf during breaks in drilling. The MgO workpiece must be kept cool at all times with water. After all the swarf is rinsed off, the piece is left to dry overnight. If the workpiece is still attached to the base of the MgO block after drilling, it may be cut off by using a diamond cutoff wheel on a rotary hand tool or by using a low-speed saw.

  19. Ocean Sediment Thickness Contours

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean sediment thickness contours in 200 meter intervals for water depths ranging from 0 - 18,000 meters. These contours were derived from a global sediment...

  20. Origami of thick panels

    Science.gov (United States)

    Chen, Yan; Peng, Rui; You, Zhong

    2015-07-01

    Origami patterns, including the rigid origami patterns in which flat inflexible sheets are joined by creases, are primarily created for zero-thickness sheets. In order to apply them to fold structures such as roofs, solar panels, and space mirrors, for which thickness cannot be disregarded, various methods have been suggested. However, they generally involve adding materials to or offsetting panels away from the idealized sheet without altering the kinematic model used to simulate folding. We develop a comprehensive kinematic synthesis for rigid origami of thick panels that differs from the existing kinematic model but is capable of reproducing motions identical to that of zero-thickness origami. The approach, proven to be effective for typical origami, can be readily applied to fold real engineering structures.

  1. Paediatric intraocular lens implants: accuracy of lens power calculations.

    Science.gov (United States)

    O'Gallagher, M K; Lagan, M A; Mulholland, C P; Parker, M; McGinnity, G; McLoone, E M

    2016-09-01

    PurposeThis study aims to evaluate the accuracy of lens prediction formulae on a paediatric population.MethodsA retrospective case-note review was undertaken of patients under 8 years old who underwent cataract surgery with primary lens implantation in a regional referral centre for paediatric ophthalmology, excluding those whose procedure was secondary to trauma. Biometric and refractive data were analysed for 43 eyes, including prediction errors (PE). Statistical measures used included mean absolute error (MAE), median absolute error (MedAE), Student's t-test and Lin's correlation coefficient.ResultsThe mean PE using the SRK-II formula was +0.96 D (range -2.47D to +2.41 D, SD 1.33 D, MAE 1.38 D, MedAE 1.55, n=15). The mean PE was smaller using SRK/T (-0.18 D, range -3.25 D to +3.95 D, SD 1.70 D, MAE 1.30 D, MedAE 1.24, n=27). We performed an analysis of the biometry data using four different formula (Hoffer Q, Holladay 1, SRK-II and SRK/T). Hoffer Q showed a smaller MedAE than other formulae but also a myopic bias.ConclusionOur clinical data suggest SRK/T was more accurate in predicting post-operative refraction in this cohort of paediatric patients undergoing cataract surgery. Hoffer Q may have improved accuracy further.

  2. Campylobacter polysaccharide capsules: virulence and vaccines

    Directory of Open Access Journals (Sweden)

    Patricia eGuerry

    2012-02-01

    Full Text Available Campylobacter jejuni remains a major cause of bacterial diarrhea worldwide and is associated with numerous sequelae, including Guillain Barre Syndrome, inflammatory bowel disease, reactive arthritis, and irritable bowel syndrome. C. jejuni is unusual for an intestinal pathogen in its ability to coat its surface with a polysaccharide capsule (CPS. These capsular polysaccharides vary in sugar composition and linkage, especially those involving heptoses of unusual configuration and O-methyl phosphoramidate linkages. This structural diversity is consistent with CPS being the major serodeterminant of the Penner scheme, of which there are 47 C. jejuni serotypes. Both CPS expression and expression of modifications are subject to phase variation by slip strand mismatch repair. Although capsules are virulence factors for other pathogens, the role of CPS in C. jejuni disease has not been well defined beyond descriptive studies demonstrating a role in serum resistance and for diarrhea in a ferret model of disease. However, perhaps the most compelling evidence for a role in pathogenesis are data that CPS conjugate vaccines protect against diarrheal disease in non-human primates. A CPS conjugate vaccine approach against this pathogen is intriguing, but several questions need to be addressed, including the valency of CPS types required for an effective vaccine. There have been numerous studies of prevalence of CPS serotypes in the developed world, but few studies from developing countries where the disease incidence is higher. The complexity and cost of Penner serotyping has limited its usefulness, and a recently developed multiplex PCR method for determination of capsule type offers the potential of a more rapid and affordable method. Comparative studies have shown a strong correlation of the two methods and studies are beginning to ascertain CPS-type distribution worldwide, as well as examination of correlation of severity of illness with specific CPS types.

  3. Flat lens for seismic waves

    CERN Document Server

    Brule, Stephane; Guenneau, Sebastien

    2016-01-01

    A prerequisite for achieving seismic invisibility is to demonstrate the ability of civil engineers to control seismic waves with artificially structured soils. We carry out large-scale field tests with a structured soil made of a grid consisting of cylindrical and vertical holes in the ground and a low frequency artificial source (< 10 Hz). This allows the identification of a distribution of energy inside the grid, which can be interpreted as the consequence of an effective negative refraction index. Such a flat lens reminiscent of what Veselago and Pendry envisioned for light opens avenues in seismic metamaterials to counteract the most devastating components of seismic signals.

  4. Atom lens without chromatic aberrations

    CERN Document Server

    Efremov, Maxim A; Schleich, Wolfgang P

    2012-01-01

    We propose a lens for atoms with reduced chromatic aberrations and calculate its focal length and spot size. In our scheme a two-level atom interacts with a near-resonant standing light wave formed by two running waves of slightly different wave vectors, and a far-detuned running wave propagating perpendicular to the standing wave. We show that within the Raman-Nath approximation and for an adiabatically slow atom-light interaction, the phase acquired by the atom is independent of the incident atomic velocity.

  5. Intraocular lens with accommodation capacity

    OpenAIRE

    Dorronsoro, Carlos; Alejandre, Nicolás; Bekesi, Nandor; Marcos, Susana

    2014-01-01

    Intraocular lens with accommodation capacity comprising a first optical member (1) having a dynamic optical power, to which a second optical member (2) with a fixed optical power is affixed, in such a manner that at least a central part of each of one of one of the curved surfaces (2a, 2b) of the second optical member (2) and of at least one of the surfaces (1a, 1b) of the first optical member (1) are in contact with each other, the second optical member (2) and the first optical member (1) p...

  6. Contact lens intolerance: refitting with dual axis lens for corneal refractive therapy

    Science.gov (United States)

    López-López, María; Pelegrín-Sánchez, José Miguel; Sobrado-Calvo, Paloma; García-Ayuso, Diego

    2011-01-01

    Corneal refractive therapy is a non-surgical procedure whose main purpose is to improve uncorrected visual acuity during the day, without spectacles or contact lenses. We report an adult woman who shows contact lens intolerance and does not want to wear eyeglasses. We used dual axis contact lens to improve lens centration. We demonstrate a maintained unaided visual acuity during one year of treatment. In conclusion, we can consider refitting with dual axis lens for corneal refractive therapy as a non-surgical option for patients who show contact lens intolerance.

  7. New reduced volume preparation regimen in colon capsule endoscopy

    Institute of Scientific and Technical Information of China (English)

    Yasuo Kakugawa; Kazuhide Higuchi; Shinji Tanaka; Hideki Ishikawa; Hisao Tajiri; Yutaka Saito; Shoichi Saito; Kenji Watanabe; Naoki Ohmiya; Mitsuyuki Murano; Shiro Oka; Tetsuo Arakawa; Hidemi Goto

    2012-01-01

    AIM:To evaluate the effectiveness of our proposed bowel preparation method for colon capsule endoscopy.METHODS:A pilot,multicenter,randomized controlled trial compared our proposed "reduced volume method" (group A) with the "conventional volume method" (group B) preparation regimens.Group A did not drink polyethylene glycol electrolyte lavage solution (PEGELS) the day before the capsule procedure,while group B drank 2 L.During the procedure day,groups A and B drank 2 L and 1 L of PEG-ELS,respectively,and swallowed the colon capsule (PillCam COLON(R) capsule).Two hours later the first booster of 100 g magnesium citrate mixed with 900 mL water was administered to both groups,and the second booster was administered six hours post capsule ingestion as long as the capsule had not been excreted by that time.Capsule videos were reviewed for grading of cleansing level.RESULTS:Sixty-four subjects were enrolled,with results from 60 analyzed.Groups A and B included 31 and 29 subjects,respectively.Twenty-nine (94%) subjects in group A and 25 (86%) subjects in group B had adequate bowel preparation (ns).Twenty-two (71%) of the 31 subjects in group A excreted the capsule within its battery life compared to 16 (55%) of the 29 subjects in group B (ns).Of the remaining 22 subjects whose capsules were not excreted within the battery life,all of the capsules reached the left side colon before they stopped functioning.A single adverse event was reported in one subject who had mild symptoms of nausea and vomiting one hour after starting to drink PEG-ELS,due to ingesting the PEG-ELS faster than recommended.CONCLUSION:Our proposed reduced volume bowel preparation method for colon capsule without PEG-ELS during the days before the procedure was as effective as the conventional volume method.

  8. Fabricating customized hydrogel contact lens

    Science.gov (United States)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  9. On the mechanism of wind-induced transformation of a river runoff water lens in the Kara Sea

    Science.gov (United States)

    Zatsepin, A. G.; Zavialov, P. O.; Baranov, V. I.; Kremenetskiy, V. V.; Nedospasov, A. A.; Poyarkov, S. G.; Ocherednik, V. V.

    2017-01-01

    The paper describes a possible mechanism for the transformation of a desalinated water lens in the Kara Sea under the action of vertical turbulent mixing induced by wind. Using a simple one-dimensional model, we show that the strongest transformation occurs at the edge of the lens—its frontal zone, where the thickness of the desalinated layer is the smallest. Because of the strong (cubic) nonlinear dependence of the turbulent energy flux on the wind speed, significant transformation of the frontal zone of the lens occurs during storm events. A series of consecutive storms can cause horizontal lens fragmentation into several zones in which the salinity increases spasmodically towards the edge of the lens.

  10. 21 CFR 876.1300 - Ingestible telemetric gastrointestinal capsule imaging system.

    Science.gov (United States)

    2010-04-01

    ... § 876.1300 Ingestible telemetric gastrointestinal capsule imaging system. (a) Identification. An ingestible telemetric gastrointestinal capsule imaging system is used for visualization of the small bowel... Special Controls Guidance Document: Ingestible Telemetric Gastrointestinal Capsule Imaging Systems;...

  11. Plasma Lens for Muon and Neutrino Beams

    Energy Technology Data Exchange (ETDEWEB)

    Kahn,S.A.; Korenev, S.; Bishai, M.; Diwan, M.; Gallardo, J.C.; Hershcovitch, A.; Johnson, B.M.

    2008-06-23

    The plasma lens is examined as an alternate to focusing horns and solenoids for use in a neutrino or muon beam facility. The plasma lens concept is based on a combined high-energy lens/target configuration. The current is fed at electrodes located upstream and downstream from the target where pion capturing is needed. The current flows primarily in the plasma, which has a lower resistivity than the target. A second plasma lens section, with an additional current feed, follows the target to provide shaping of the plasma for optimum focusing. The plasma lens is immersed in an additional solenoid magnetic field to facilitate the plasma stability. The geometry of the plasma is shaped to provide optimal pion capture. Simulations of this plasma lens system have shown a 25% higher neutrino production than the horn system. Plasma lenses have the additional advantage of negligible pion absorption and scattering by the lens material and reduced neutrino contamination during anti-neutrino running. Results of particle simulations using plasma lens will be presented.

  12. Liquid lens using acoustic radiation force.

    Science.gov (United States)

    Koyama, Daisuke; Isago, Ryoichi; Nakamura, Kentaro

    2011-03-01

    A liquid lens is proposed that uses acoustic radiation force with no mechanical moving parts. It consists of a cylindrical acrylic cell filled with two immiscible liquids (degassed water and silicone oil) and a concave ultrasound transducer. The focal point of the transducer is located on the oil-water interface, which functions as a lens. The acoustic radiation force is generated when there is a difference in the acoustic energy densities of different media. An acoustic standing wave was generated in the axial direction of the lens and the variation of the shape of the oil-water interface was observed by optical coherence tomography (OCT). The lens profile can be rapidly changed by varying the acoustic radiation force from the transducer. The kinematic viscosity of silicone oil was optimized to minimize the response times of the lens. Response times of 40 and 80 ms when switching ultrasonic radiation on and off were obtained with a kinematic viscosity of 200 cSt. The path of a laser beam transmitted through the lens was calculated by ray-tracing simulations based on the experimental results obtained by OCT. The transmitted laser beam could be focused by applying an input voltage. The liquid lens could be operated as a variable-focus lens by varying the input voltage.

  13. Metasurface lens: Shrinking the camera size

    Science.gov (United States)

    Sun, Cheng

    2017-01-01

    A miniaturized camera has been developed by integrating a planar metasurface lens doublet with a CMOS image sensor. The metasurface lens doublet corrects the monochromatic aberration and thus delivers nearly diffraction-limited image quality over a wide field of view.

  14. Managing as designing with a positive lens

    NARCIS (Netherlands)

    Avital, M.; Boland, R.J.; Avital, M.; Boland, R.J.; Cooperrider, D.L.

    2007-01-01

    The role and potential contribution of a positive lens to the design of systems and organizations is the focus of this essay. The positive lens refers to an emerging perspective in the social sciences that emphasizes a positive stance toward our capacity to construct better organizations and technol

  15. Potassium iodide capsule treatment of feline sporotrichosis.

    Science.gov (United States)

    Reis, Erica G; Gremião, Isabella D F; Kitada, Amanda A B; Rocha, Raphael F D B; Castro, Verônica S P; Barros, Mônica B L; Menezes, Rodrigo C; Pereira, Sandro A; Schubach, Tânia M P

    2012-06-01

    Sporotrichosis is a mycosis caused by Sporothrix schenckii. The most affected animal is the cat; it has played an important role in the zoonotic transmission of this disease, especially in Rio de Janeiro, Brazil, since 1998. In order to evaluate the treatment of feline sporotrichosis with potassium iodide, an observational cohort was conducted in 48 cats with sporotrichosis at Instituto de Pesquisa Clínica Evandro Chagas, Fiocruz. All cats received potassium iodide capsules, 2.5 mg/kg to 20 mg/kg q24h. The cure rate was 47.9%, treatment failure was 37.5%, treatment abandonment was 10.4% and death was 4.2%. Clinical adverse effects were observed in 52.1% of the cases. Thirteen cats had a mild increase in hepatic transaminase levels during the treatment, six of them presented clinical signs suggestive of hepatotoxicity. Compared to previous studies with itraconazole and iodide in saturated solution, potassium iodide capsules are an alternative for feline sporotrichosis treatment.

  16. Orbital Thermal Control of the Mercury Capsule

    Science.gov (United States)

    Weston, Kenneth C.

    1960-01-01

    The approach to orbital thermal control of the Project Mercury capsule environment is relatively unsophisticated compared with that for many unmanned satellites. This is made possible by the relatively short orbital flight of about 4 1/2 hours and by the presence of the astronaut who is able to monitor the capsule systems and compensate for undesirable thermal conditions. The general external features of the Mercury configuration as it appears in the orbital phase of flight are shown. The conical afterbody is a double-wall structure. The inner wall serves as a pressure vessel for the manned compartment, and the outer wall, of shingle type construction, acts as a radiating shield during reentry. Surface treatment of the shingles calls for a stably oxidized surface to minimize reentry temperatures. The shingles are supported by insulated stringers attached to the inner skin. Areas between stringers are insulated by blankets of Thermoflex insulation. This insulation is especially effective at high altitude due to the reduction of its thermal conductivity with decreasing pressure. As a result of the design of the afterbody for the severe reentry conditions, the heat balance on the manned compartment indicates the necessity for moderate internal cooling to compensate for the heat generation due to human and electrical sources. This cooling is achieved by the controlled vaporization of water in the cabin and astronaut-suit heat exchangers.

  17. Potential value of Cs-137 capsules

    Energy Technology Data Exchange (ETDEWEB)

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  18. Isotretinoin Oil-Based Capsule Formulation Optimization

    Directory of Open Access Journals (Sweden)

    Pi-Ju Tsai

    2013-01-01

    Full Text Available The purpose of this study was to develop and optimize an isotretinoin oil-based capsule with specific dissolution pattern. A three-factor-constrained mixture design was used to prepare the systemic model formulations. The independent factors were the components of oil-based capsule including beeswax (X1, hydrogenated coconut oil (X2, and soybean oil (X3. The drug release percentages at 10, 30, 60, and 90 min were selected as responses. The effect of formulation factors including that on responses was inspected by using response surface methodology (RSM. Multiple-response optimization was performed to search for the appropriate formulation with specific release pattern. It was found that the interaction effect of these formulation factors (X1X2, X1X3, and X2X3 showed more potential influence than that of the main factors (X1, X2, and X3. An optimal predicted formulation with Y10 min, Y30 min, Y60 min, and Y90 min release values of 12.3%, 36.7%, 73.6%, and 92.7% at X1, X2, and X3 of 5.75, 15.37, and 78.88, respectively, was developed. The new formulation was prepared and performed by the dissolution test. The similarity factor f2 was 54.8, indicating that the dissolution pattern of the new optimized formulation showed equivalence to the predicted profile.

  19. Quality evaluation of simvastatin compounded capsules

    Directory of Open Access Journals (Sweden)

    Flávia Dias Marques-Marinho

    2011-09-01

    Full Text Available Simvastatin is commercially available as tablets and compounded capsules in Brazil. Very few reports regarding these capsules' quality, and consequently their efficacy, are available. The pharmaceutical quality of 30 batches of 20 mg simvastatin capsules from the market was evaluated by weight determination, content uniformity, disintegration (Brazilian Pharmacopeia, assay and dissolution test (USP32 tablet monograph. A HPLC method was developed for assay, content uniformity and dissolution test, and specifications were also established. Out of the 30 batches evaluated, 29 showed capsule disintegration within 45 min and individual weight variation was within ±10% or ±7.5% relative to average weight, for 300 mg, respectively. Only 27 batches met dissolution test criteria with values >80% of the labeled amount in 45 min; 21 batches showed simvastatin content between 90.0-110.0% of the labeled amount and 19 batches had at least 9 out of 10 capsules with content uniformity values between 85.0-115.0% of the labeled amount with RSDNo Brasil, a sinvastatina está comercialmente disponível na forma de comprimidos e cápsulas manipuladas. Poucos relatos estão disponíveis sobre a qualidade e, consequentemente, a eficácia dessas cápsulas. A qualidade de 30 lotes de sinvastatina 20 mg cápsulas do mercado foi avaliada através da determinação de peso, uniformidade de conteúdo, desintegração (Farmacopéia Brasileira, doseamento e teste de dissolução (monografia comprimidos USP32. Método por CLAE foi desenvolvido para o doseamento, uniformidade de conteúdo e teste de dissolução; além disso, especificações foram estabelecidas. Dos 30 lotes avaliados, 29 apresentaram desintegração da cápsula até 45 min e a variação do peso individual foi ± 10% ou ± 7,5% em relação ao peso médio, se 300 mg, respectivamente. Apenas 27 lotes preencheram os critérios do teste de dissolução com valores > 80% da quantidade rotulada, em 45 min, 21

  20. Vitrectomy and translocation of the anterior chamber intraocular lens to the sulcus: a closed microsurgical technique for the UGH syndrome.

    Science.gov (United States)

    Gualtieri, William; Rossini, Paolo; Forlini, Cesare

    2008-01-01

    This interventional case report presents an anterior chamber intraocular lens (AC-IOL) translocation technique to manage a case of uveitis-glaucoma-hyphema (UGH) syndrome associated with posterior dislocation of nuclear fragments and vitreitis as a consequence of capsule rupture during cataract surgery. Pars plana vitrectomy followed by an AC-IOL translocation from the anterior chamber to the sulcus without additional surgical corneal incision was performed. At 12 months' follow-up, the original AC-IOL was in stable position in the posterior chamber, with binocular refractive balance and no further astigmatism and resolution of the UGH syndrome.

  1. Effect of small-dose mifepristone in combined with Gongxuening capsule on perimenopasual dysfunctional uterine bleeding and sex hormone levels

    Institute of Scientific and Technical Information of China (English)

    Wei-Feng Zhang

    2016-01-01

    Objective:To explore the clinical efficacy of small-dose mifepristone in combined with Gongxuening capsule in the treatment of perimenopasual dysfunctional uterine bleeding and their effects on sex hormone levels. Methods: The perimenopasual women with dysfunctional uterine bleeding who were admitted in our hospital from October, 2014 to October, 2015 and received small-dose mifepristone in combined with Gongxuening capsule were served as the observation group. They were orally administered with mifepristone, 6.25 mg/time, 1 time/d, taken before bedtime, and Gongxuening capsule, 2 pills/time, 3 times/d, for 7 d after each menstruation, and continuously for 3 months. The perimenopasual women with dysfunctional uterine bleeding who were received mifepristone were served as the control group. They were orally administered with mifepristone, 12.5 mg/time, 1 time/d, taken before bedtime, and continuously for 3 months. The HGB level and endometrial thickness before and after treatment were detected. The bleeding control time, total blood stopping time, and adverse reactions in the two groups were compared. The levels of FSH, E2, P, and LH before and after treatment in the two groups were determined. Results:After treatment, HGB level in the observation group was elevated, and the altered degree of endometrial thickness was significantly superior to that in the control group (P0.05). Conclusions: Small-dose mifepristone in combined with Gongxuening capsule in the treatment of perimenopasual dysfunctional uterine bleeding can effectively improve the endometrial thickness, timely control bleeding, and improve the serum sex hormone levels, with a satisfactory effect;therefore, it deserves to be widely recommended in the clinic.

  2. Triple-ion interactions for the construction of supramolecular capsules

    NARCIS (Netherlands)

    Oshovsky, G.; Reinhoudt, David; Verboom, Willem

    2006-01-01

    A novel type of [2+4] capsules based on triple-ion interactions was obtained. Four monovalent anions (bromide, nitrate, acetate, and tosylate) bring together two tetrakis(pyridiniummethyl)tetramethyl cavitands by pyridinium−anion−pyridinium interactions. ESI-MS experiments have confirmed the capsule

  3. Experimental measurement on movement of spiral-type capsule endoscope

    Directory of Open Access Journals (Sweden)

    Yang W

    2016-01-01

    Full Text Available Wanan Yang,1 Houde Dai,2 Yong He,1 Fengqing Qin1 1School of Computer and Information Engineering, Yibin University, Yibin, Sichuan, People's Republic of China; 2Quanzhou Institute of Equipment Manufacturing, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Quanzhou, People's Republic of China Abstract: Wireless capsule endoscope achieved great success, however, the maneuvering of wireless capsule endoscope is challenging at present. A magnetic driving instrument, including two bar magnets, a stepper motor, a motor driver, a motor controller, and a power supplier, was developed to generate rotational magnetic fields. Permanent magnet ring, magnetized as S and N poles radially and mounted spiral structure on the surface, acted as a capsule. The maximum torque passing to the capsule, rotational synchronization of capsule and motor, and the translational speed of capsule, were measured in ex vivo porcine large intestine. The experimental results illustrate that the rotational movement of the spiral-type capsule in the intestine is feasible and the cost of the magnetic driving equipment is low. As a result, the solution is promising in the future controllability. Keywords: wireless capsule endoscope, magnet ring, magnetic driving, spiral structure, torque  

  4. Improving ICF implosion performance with alternative capsule supports

    Science.gov (United States)

    Weber, C. R.; Casey, D. T.; Clark, D. S.; Hammel, B. A.; MacPhee, A.; Milovich, J.; Martinez, D.; Robey, H. F.; Smalyuk, V. A.; Stadermann, M.; Amendt, P.; Bhandarkar, S.; Chang, B.; Choate, C.; Crippen, J.; Felker, S. J.; Field, J. E.; Haan, S. W.; Johnson, S.; Kroll, J. J.; Landen, O. L.; Marinak, M.; Mcinnis, M.; Nikroo, A.; Rice, N.; Sepke, S. M.

    2017-05-01

    The thin membrane that holds the capsule in-place in the hohlraum is recognized as one of the most significant contributors to reduced performance in indirect drive inertial confinement fusion (ICF) experiments on the National Ignition Facility. This membrane, known as the "tent," seeds a perturbation that is amplified by Rayleigh-Taylor and can rupture the capsule. A less damaging capsule support mechanism is under development. Possible alternatives include the micron-scale rods spanning the hohlraum width and supporting either the capsule or stiffening the fill-tube, a larger fill-tube to both fill and support the capsule, or a low-density foam layer that protects the capsule from the tent impact. Experiments are testing these support features to measure their imprint on the capsule. These experiments are revealing unexpected aspects about perturbation development in indirect drive ICF, such as the importance of shadows coming from bright spots in the hohlraum. Two dimensional and 3D models are used to explain these features and assess the impact on implosion performance. Experiments and modeling suggest that the fill-tube supported by a perpendicular rod can mount the capsule without any additional perturbation beyond that of the fill tube.

  5. Risk factors for incomplete small-bowel capsule endoscopy

    NARCIS (Netherlands)

    Westerhof, Jessie; Weersma, Rinse K.; Koornstra, Jan J.

    2009-01-01

    Background: In 20% to 30% of capsule endoscopy (CE) procedures, the capsule does not reach the cecum within recording time, with incomplete imaging of the small bowel, which limits the value of CE. Objective: To identify possible risk factors for incomplete small-bowel CE examinations. Design: Data

  6. Material properties of the human posterior knee capsule

    NARCIS (Netherlands)

    Rachmat, H.H.; Janssen, D.W.; van Tienen, T.; Diercks, R.L.; Verkerke, Gijsbertus Jacob; Verdonschot, Nicolaas Jacobus Joseph; Fernandes, Paulo; Folgado, Joao; Silva, Miguel

    2012-01-01

    BACKGROUND: There is considerable interest to develop accurate subject-specific biomechanical models of the knee. Most of the existing models currently do not include a representation of the posterior knee capsule. In order to incorporate the posterior capsule in knee models, data is needed on its

  7. Experimental modulation of capsule size in Cryptococcus neoformans

    Directory of Open Access Journals (Sweden)

    Zaragoza Oscar

    2004-01-01

    Full Text Available Experimental modulation of capsule size is an important technique for the study of the virulence of the encapsulated pathogen Cryptococcus neoformans. In this paper, we summarize the techniques available for experimental modulation of capsule size in this yeast and describe improved methods to induce capsule size changes. The response of the yeast to the various stimuli is highly dependent on the cryptococcal strain. A high CO2 atmosphere and a low iron concentration have been used classically to increase capsule size. Unfortunately, these stimuli are not reliable for inducing capsular enlargement in all strains. Recently we have identified new and simpler conditions for inducing capsule enlargement that consistently elicited this effect. Specifically, we noted that mammalian serum or diluted Sabouraud broth in MOPS buffer pH 7.3 efficiently induced capsule growth. Media that slowed the growth rate of the yeast correlated with an increase in capsule size. Finally, we summarize the most commonly used media that induce capsule growth in C. neoformans.

  8. Bacterial assay of contact lens wearers.

    Science.gov (United States)

    Hart, D E; Hosmer, M; Georgescu, M; Farris, R L

    1996-03-01

    The goal of the project was to determine the quantity of bacteria on the contact lens and adjacent areas of the eye. This paper is a quantitative study of the contact lens and ocular aerobic microbiota in a mixed group of daily and extended wear disposable contact lens users. The contact lens, the lower fornix, tears collecting at the lower fornix, and edge of the lower lid at the Meibomian gland margin were assayed for the quantity of bacterial colony forming units (CFU). Eighteen patients wearing 49 disposable high water content hydrogel contact lenses were assayed and the mean lens age was 8.8 +/- 4.6 days. Three patients wore their lenses on a daily wear basis and 15 on an extended wear schedule. Tear samples were obtained with sterile microbial loops and the lens was macerated into small particles with a tissue grinder. The samples were poured onto the surface of chocolate agar plates and incubated at 35 degrees C for 48 h in 5% Co2. The lid margin revealed the greatest bacterial presence (mean = 9.7 CFU; median = 2 CFU; mode = 0 CFU). The lens showed the next greatest presence of CFU (mean = 4.5 CFU; median = 1 CFU; mode = 0). The fornix and tears revealed the least bacterial presence (fornix: mean = 2.6 CFU; median = 0 CFU; mode = 0 CFU). The bacteria were coagulase-negative staphylococci. The bacterial assay of disposable lens wearing contact lens subjects indicates that the lid margins are the greatest source of bacteria with the tears being the lowest. These studies support the concept that in the eye, the lens typically does not possess a large number of bacteria under normal conditions.

  9. Consumer electronic optics: how small can a lens be: the case of panomorph lenses

    Science.gov (United States)

    Thibault, Simon; Parent, Jocelyn; Zhang, Hu; Du, Xiaojun; Roulet, Patrice

    2014-09-01

    In 2014, miniature camera modules are applied to a variety of applications such as webcam, mobile phone, automotive, endoscope, tablets, portable computers and many other products. Mobile phone cameras are probably one of the most challenging parts due to the need for smaller and smaller total track length (TTL) and optimized embedded image processing algorithms. As the technology is developing, higher resolution and higher image quality, new capabilities are required to fulfil the market needs. Consequently, the lens system becomes more complex and requires more optical elements and/or new optical elements. What is the limit? How small an injection molded lens can be? We will discuss those questions by comparing two wide angle lenses for consumer electronic market. The first lens is a 6.56 mm (TTL) panoramic (180° FOV) lens built in 2012. The second is a more recent (2014) panoramic lens (180° FOV) with a TTL of 3.80 mm for mobile phone camera. Both optics are panomorph lenses used with megapixel sensors. Between 2012 and 2014, the development in design and plastic injection molding allowed a reduction of the TTL by more than 40%. This TTL reduction has been achieved by pushing the lens design to the extreme (edge/central air and material thicknesses as well as lens shape). This was also possible due to a better control of the injection molding process and material (low birefringence, haze and thermal stability). These aspects will be presented and discussed. During the next few years, we don't know if new material will come or new process but we will still need innovative people and industries to push again the limits.

  10. Analysis of Fission Products on the AGR-1 Capsule Components

    Energy Technology Data Exchange (ETDEWEB)

    Paul A. Demkowicz; Jason M. Harp; Philip L. Winston; Scott A. Ploger

    2013-03-01

    The components of the AGR-1 irradiation capsules were analyzed to determine the retained inventory of fission products in order to determine the extent of in-pile fission product release from the fuel compacts. This includes analysis of (i) the metal capsule components, (ii) the graphite fuel holders, (iii) the graphite spacers, and (iv) the gas exit lines. The fission products most prevalent in the components were Ag-110m, Cs 134, Cs 137, Eu-154, and Sr 90, and the most common location was the metal capsule components and the graphite fuel holders. Gamma scanning of the graphite fuel holders was also performed to determine spatial distribution of Ag-110m and radiocesium. Silver was released from the fuel components in significant fractions. The total Ag-110m inventory found in the capsules ranged from 1.2×10 2 (Capsule 3) to 3.8×10 1 (Capsule 6). Ag-110m was not distributed evenly in the graphite fuel holders, but tended to concentrate at the axial ends of the graphite holders in Capsules 1 and 6 (located at the top and bottom of the test train) and near the axial center in Capsules 2, 3, and 5 (in the center of the test train). The Ag-110m further tended to be concentrated around fuel stacks 1 and 3, the two stacks facing the ATR reactor core and location of higher burnup, neutron fluence, and temperatures compared with Stack 2. Detailed correlation of silver release with fuel type and irradiation temperatures is problematic at the capsule level due to the large range of temperatures experienced by individual fuel compacts in each capsule. A comprehensive Ag 110m mass balance for the capsules was performed using measured inventories of individual compacts and the inventory on the capsule components. For most capsules, the mass balance was within 11% of the predicted inventory. The Ag-110m release from individual compacts often exhibited a very large range within a particular capsule.

  11. Analysis of Fission Products on the AGR-1 Capsule Components

    Energy Technology Data Exchange (ETDEWEB)

    Paul A. Demkowicz; Jason M. Harp; Philip L. Winston; Scott A. Ploger

    2013-03-01

    The components of the AGR-1 irradiation capsules were analyzed to determine the retained inventory of fission products in order to determine the extent of in-pile fission product release from the fuel compacts. This includes analysis of (i) the metal capsule components, (ii) the graphite fuel holders, (iii) the graphite spacers, and (iv) the gas exit lines. The fission products most prevalent in the components were Ag-110m, Cs 134, Cs 137, Eu-154, and Sr 90, and the most common location was the metal capsule components and the graphite fuel holders. Gamma scanning of the graphite fuel holders was also performed to determine spatial distribution of Ag-110m and radiocesium. Silver was released from the fuel components in significant fractions. The total Ag-110m inventory found in the capsules ranged from 1.2×10 2 (Capsule 3) to 3.8×10 1 (Capsule 6). Ag-110m was not distributed evenly in the graphite fuel holders, but tended to concentrate at the axial ends of the graphite holders in Capsules 1 and 6 (located at the top and bottom of the test train) and near the axial center in Capsules 2, 3, and 5 (in the center of the test train). The Ag-110m further tended to be concentrated around fuel stacks 1 and 3, the two stacks facing the ATR reactor core and location of higher burnup, neutron fluence, and temperatures compared with Stack 2. Detailed correlation of silver release with fuel type and irradiation temperatures is problematic at the capsule level due to the large range of temperatures experienced by individual fuel compacts in each capsule. A comprehensive Ag 110m mass balance for the capsules was performed using measured inventories of individual compacts and the inventory on the capsule components. For most capsules, the mass balance was within 11% of the predicted inventory. The Ag-110m release from individual compacts often exhibited a very large range within a particular capsule.

  12. Analysing intracellular deformation of polymer capsules using structured illumination microscopy

    Science.gov (United States)

    Chen, Xi; Cui, Jiwei; Sun, Huanli; Müllner, Markus; Yan, Yan; Noi, Ka Fung; Ping, Yuan; Caruso, Frank

    2016-06-01

    Understanding the behaviour of therapeutic carriers is important in elucidating their mechanism of action and how they are processed inside cells. Herein we examine the intracellular deformation of layer-by-layer assembled polymer capsules using super-resolution structured illumination microscopy (SIM). Spherical- and cylindrical-shaped capsules were studied in three different cell lines, namely HeLa (human epithelial cell line), RAW264.7 (mouse macrophage cell line) and differentiated THP-1 (human monocyte-derived macrophage cell line). We observed that the deformation of capsules was dependent on cell line, but independent of capsule shape. This suggests that the mechanical forces, which induce capsule deformation during cell uptake, vary between cell lines, indicating that the capsules are exposed to higher mechanical forces in HeLa cells, followed by RAW264.7 and then differentiated THP-1 cells. Our study demonstrates the use of super-resolution SIM in analysing intracellular capsule deformation, offering important insights into the cellular processing of drug carriers in cells and providing fundamental knowledge of intracellular mechanobiology. Furthermore, this study may aid in the design of novel drug carriers that are sensitive to deformation for enhanced drug release properties.Understanding the behaviour of therapeutic carriers is important in elucidating their mechanism of action and how they are processed inside cells. Herein we examine the intracellular deformation of layer-by-layer assembled polymer capsules using super-resolution structured illumination microscopy (SIM). Spherical- and cylindrical-shaped capsules were studied in three different cell lines, namely HeLa (human epithelial cell line), RAW264.7 (mouse macrophage cell line) and differentiated THP-1 (human monocyte-derived macrophage cell line). We observed that the deformation of capsules was dependent on cell line, but independent of capsule shape. This suggests that the mechanical forces

  13. Imaging of sub-surface nanostructures by dielectric planer cavity coupled microsphere lens

    Science.gov (United States)

    Guo, Minglei; Ye, Yong-Hong; Hou, Jinglei; Du, Bintao; Wang, Tian

    2017-01-01

    In this paper, a dielectric planar cavity between an object and a microsphere lens is fabricated and its effects on the imaging of sub-surface nanostructures have been studied. Using the dielectric planar cavity combined (DPCC) silica microsphere lens, our experimental results illustrate that the nanostructures of data-recorded Blu-ray disc can be clearly resolved. Optical images of the object with higher contrast and larger field of view (FOV) can be obtained, compared to the case when only a microsphere lens is used. For the 3.4 μm diameter microsphere lens combing a planar cavity with a thickness about 2.2 μm, the FOV is about 2.4 μm and the magnification is about 1.6. With the 3.4 μm diameter microsphere lens only, the FOV and magnification is 1.5 μm and 1.4 respectively. Theoretical analysis of the imaging properties is carried out by the characteristics of electric field distribution of microsphere lenses. The simulated results indicate that the dielectric planar cavity working as a Fabry-Pérot cavity can effectively enhance the coupling of optical information.

  14. Comparative study of the sectional slice of the anterior commissure and the internal capsule with its MRI images

    Institute of Scientific and Technical Information of China (English)

    WANG Dandan; MA Wenyi; Zhang Xiaoyang; YUAN Lixiang; YUAN Wu; LI Yunsheng

    2015-01-01

    Objective:The brain of 100 normal persons were performed MRI scan and image analysis. 12 adult female brain specimens fixed by formalin, were made into the thickness of 0. 5mm by celloidin embedding technique. We analyzed the anatomical position of the relationship about the anterior limb of internal capsule and the anterior commissure in eollodion-embedded plans, and then compared with the brain MRI of normal people. We also further compared the statistical differences of the internal capsule’ s volume. This research aimed to pro-vide a reliable sectional anatomic basis for the study of the central nervous system and deep brain stimulation to treat the mental neurological diseases. Results:1. Continous observation of celloid in brain slices horizontal section:Approximately 130 slices of each specimen, from the parietal lobe,the internal capsule was the typical structure"><" on the level of about 35 mm . On the level of about 41mm, the anterior commissure was"arc" through the bot-tom head of the caudate nucleus connecting the bilateral anterior limb, which located between the caudate nucleus and the lentiform nucleus. The posterior limb of internal capsule situated between the dorsal thalamus and the lenti-form nucleus on the level of about 46 mm. Coronal section:about 150 slices of per specimen, from the former lat-eral ventricle horn back,on the level of about 16 mm the anterior commissure was "arch" connecting the anterior limb. About 28 mm dimension, the interior capsule fore limb located between the caudate nucleus and the puta-men, the posterior limb of internal capsule located between the globus pallidus and the dorsal thalamus, extending down to the cerebral peduncle. Sagittal section:about 180 slices of per specimen, from the outside to the inside at the beginning of the temporal lobe, the corona radia taextends between the putamen and dorsal thalamus, and then formsthe posterior limb of the internal capsule at the level of about 21 mm. About 25 mm level

  15. RAMA Surveillance Capsule and Component Activation Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, Kenneth E.; Jones, Eric N. [TransWare Enterprises Inc., 1565 Mediterranean Dr., Sycamore, IL 60178 (United States); Carter, Robert G. [Electric Power Research Institute, 1300 West W. T. Harris Blvd., Charlotte, NC 28262 (United States)

    2011-07-01

    This paper presents the calculated-to-measured ratios associated with the application of the RAMA Fluence Methodology software to light water reactor surveillance capsule and reactor component activation evaluations. Comparisons to measurements are performed for pressurized water reactor and boiling water reactor surveillance capsule activity specimens from seventeen operating light water reactors. Comparisons to measurements are also performed for samples removed from the core shroud, top guide, and jet pump brace pads from two reactors. In conclusion: The flexible geometry modeling capabilities provided by RAMA, combined with the detailed representation of operating reactor history and anisotropic scattering detail, produces accurate predictions of the fast neutron fluence and neutron activation for BWR and PWR surveillance capsule geometries. This allows best estimate RPV fluence to be determined without the need for multiplicative bias corrections. The three-dimensional modeling capability in RAMA provides an accurate estimate of the fast neutron fluence for regions far removed from the core mid-plane elevation. The comparisons to activation measurements for various core components indicate that the RAMA predictions are reasonable, and notably conservative (i.e., C/M ratios are consistently greater than unity). It should be noted that in the current evaluations, the top and bottom fuel regions are represented by six inch height nodes. As a result, the leakage-induced decrease in power near the upper and lower edges of the core are not well represented in the current models. More precise predictions of fluence for components that lie above and below the core boundaries could be obtained if the upper and lower fuel nodes were subdivided into multiple axial regions with assigned powers that reflect the neutron leakage at the top and bottom of the core. This use of additional axial sub-meshing at the top and bottom of the core is analogous to the use of pin

  16. [The study of cyclosporin A modified intraocular lens preventing posterior capsular opacification in rabbit eyes].

    Science.gov (United States)

    Teng, H; Zhang, H; Tian, F; Gu, H Q; Liu, X; Sun, J

    2016-02-01

    To investigate the safety and efficacy of cyclosporine A sustained release from modified intraocular lens for preventing posterior capsular opacification (PCO) in rabbit eyes. Forty-five New Zealand albino rabbits undergoing phacoemulsification in their right eyes were randomly and equally divided into three groups. Group A had implanted original IOL, group B had implanted PLGA-IOL(IOL coated with polylactide-glycoli acid), and group C had implanted CsA-PLGA-IOL (CsA loaded PLGA-IOL). All the 45 eyes were examined by a slit-lamp microscope. The intraocular pressures were recorded. Anterior chamber flare and aqueous humor cells were graded at different time point after surgery. The concentrations of CsA in the aqueous humor and blood were determined by high performance liquid chromatography. Anterior segment tissue was histologically examined. Wet posterior capsules were weighed. PCO was graded 6 months later. The mean concentrations of CsA in group C at 2 h,1 d,3 d,7 d,14 d,30 d,60 d after operation were (11.47±2.42) mg/L, (10.30±2.15) mg/L, (6.71±1.45) mg/L, (4.81±1.16) mg/L, (6.11±0.84) mg/L, (2.53±0.77) mg/L, (0.86±0.28) mg/L. The concentrations of CsA in blood were undetectable. During the early days after operation, the reactions of the anterior chamber in group A and B were more severe than group C. The initial appearance of PCO in group C was much later than in the other two groups, and the grade of PCO in group C was much lower than the other two groups. The mean weights of wet posterior capsules in group A(312.86±52.91) mg and B(310.64±62.42) mg were much heavier than that of group C(56.93 ± 24.24) mg. Histological observation showed that there was remarkably less accumulation of lens materials on the posterior capsules in group C than in the other two groups. No toxic actions were found in intraocular tissues in group C. Our study suggested that Cyclosporin A modified intraocular lens could effectively and safely prevent the formation and

  17. Optimal Bowel Preparation for Video Capsule Endoscopy

    Directory of Open Access Journals (Sweden)

    Hyun Joo Song

    2016-01-01

    Full Text Available During video capsule endoscopy (VCE, several factors, such as air bubbles, food material in the small bowel, and delayed gastric and small bowel transit time, influence diagnostic yield, small bowel visualization quality, and cecal completion rate. Therefore, bowel preparation before VCE is as essential as bowel preparation before colonoscopy. To date, there have been many comparative studies, consensus, and guidelines regarding different kinds of bowel cleansing agents in bowel preparation for small bowel VCE. Presently, polyethylene glycol- (PEG- based regimens are given primary recommendation. Sodium picosulphate-based regimens are secondarily recommended, as their cleansing efficacy is less than that of PEG-based regimens. Sodium phosphate as well as complementary simethicone and prokinetics use are considered. In this paper, we reviewed previous studies regarding bowel preparation for small bowel VCE and suggested optimal bowel preparation of VCE.

  18. Vortex Rings from Sphagnum Moss Capsules

    CERN Document Server

    Chang, Emily S; Cha, Jung Ha; Strassman, Sam; Hard, Clara; Whitaker, Dwight L

    2010-01-01

    Long distance wind dispersal requires small spores with low terminal velocities, which can be held aloft by turbulent air currents until they are deposited in suitable habitats for colonization. The inherent difficulty in dispersing spores by wind is that spores easily carried by wind are also rapidly decelerated when moving through still air. Thus the height of spore release is critical in determining their range of dispersal. Vascular plants with wind dispersed spores use the height of the plant to lift spores into sufficient wind currents for dispersal, however non-vascular plants such as Sphagnum cannot grow sufficiently tall. These fluid dynamics videos show how exploding capsules of {\\em Sphagnum} moss generate vortex rings to carry spores to heights above 10 cm with an initial velocity of 16 m s$^{-1}$. In contrast spores launched ballistically at these speeds through still air would travel only 2-7 mm.

  19. A comparative study on liquid core formulation on the diameter on the alginate capsules

    Science.gov (United States)

    Ong, Hui-Yen; Lee, Boon-Beng; Radzi, AkmalHadi Ma'; Zakaria, Zarina; Chan, Eng-Seng

    2015-08-01

    Liquid core capsule has vast application in biotechnology related industries such as pharmaceutical, medical, agriculture and food. Formulation of different types of capsule was important to determine the performance of the capsule. Generally, the liquid core capsule with different formulations generated different size of capsule.Therefore, the aim of this project is to investigate the effect of different liquid core solution formulations on the diameter of capsule. The capsule produced by extruding liquid core solutions into sodium alginate solution. Three types of liquid core solutions (chitosan, xanthan gum, polyethylene glycol (PEG)) were investigated. The results showed that there is significant change in capsule diameter despite in different types of liquid core solution were used and a series of capsule range in diameter of 3.1 mm to 4.5 mm were produced. Alginate capsule with chitosan formulation appeared to be the largest capsule among all.

  20. Zoom lens compensator for a cylindrical window in laser anemometer uses.

    Science.gov (United States)

    Wernet, M P; Seasholtz, R G

    1987-11-01

    In laser anemometer systems, the flow fields under study are typically enclosed by a window. Aberration of a flat window can be corrected by a shift of the object distance. A zooming correction lens eliminates the astigmatism caused by a thick cylindrical window and yields diffraction-limited performance for a monochromatic laser anemometer system. The effects of residual anamorphic distortion are discussed, and procedures for correcting these effects are presented.

  1. Use of d-3He proton spectroscopy as a diagnostic of shell rho r in capsule implosion experiments with approximately 0.2 NIF scale high temperature Hohlraums at Omega.

    Science.gov (United States)

    Delamater, N D; Wilson, D C; Kyrala, G A; Seifter, A; Hoffman, N M; Dodd, E; Singleton, R; Glebov, V; Stoeckl, C; Li, C K; Petrasso, R; Frenje, J

    2008-10-01

    We present the calculations and preliminary results from experiments on the Omega laser facility using d-(3)He filled plastic capsule implosions in gold Hohlraums. These experiments aim to develop a technique to measure shell rho r and capsule unablated mass with proton spectroscopy and will be applied to future National Ignition Facility (NIF) experiments with ignition scale capsules. The Omega Hohlraums are 1900 microm length x 1200 microm diameter and have a 70% laser entrance hole. This is approximately a 0.2 NIF scale ignition Hohlraum and reaches temperatures of 265-275 eV similar to those during the peak of the NIF drive. These capsules can be used as a diagnostic of shell rho r, since the d-(3)He gas fill produces 14.7 MeV protons in the implosion, which escape through the shell and produce a proton spectrum that depends on the integrated rho r of the remaining shell mass. The neutron yield, proton yield, and spectra change with capsule shell thickness as the unablated mass or remaining capsule rho r changes. Proton stopping models are used to infer shell unablated mass and shell rho r from the proton spectra measured with different filter thicknesses. The experiment is well modeled with respect to Hohlraum energetics, neutron yields, and x-ray imploded core image size, but there are discrepancies between the observed and simulated proton spectra.

  2. Conjugate metamaterials and the perfect lens

    CERN Document Server

    Xu, Yadong; Xu, Lin; Chen, Huanyang

    2015-01-01

    In this letter, we show how transformation optics makes it possible to design what we call conjugate metamaterials. We show that these materials can also serve as substrates for making a subwavelength-resolution lens. The so-called "perfect lens", which is a lens that could focus all components of light (including propagating and evanescent waves), can be regarded as a limiting case, in which the respective conjugate metamaterials approach the characteristics of left-handed metamaterials, which have a negative refractive index.

  3. PMMA lens with high efficiency and reliability

    Science.gov (United States)

    Matsuzaki, Ichiro; Abe, Koji; Fujita, Katsuhiro

    2013-09-01

    Polymethyl Methacrylate (PMMA) Fresnel lenses are increasingly being used in concentrated photovoltaic (CPV) systems installed outdoors and, accordingly, emphasis is being placed on the durability of such lenses with regard to light transmittance when subject to ultraviolet (UV) light and dust exposure. Accelerated testing methods for evaluating durability under UV exposure were established, allowing development of a lens material with improved UV resistance. Simultaneously, through a proprietary molding method, a Fresnel lens that boasts favorable light concentration efficiency with little deformation even after prolonged outdoor use was developed. Moreover, the lens incorporates a new hard-coat finish that possesses sand durability and UV resistance comparable to that of tempered glass.

  4. In vitro study on sustained release capsule formulation of acetazolamide.

    Science.gov (United States)

    Pandey, V P; Kannan, K; Manavalan, R; Desai, N

    2003-10-01

    In the present study formulation of sustained release capsule of acetazolamide 250 mg was tried using nonpareil seeds. Nonpareil seeds were coated with drug, polyvinylpyrrolidone, glyceryl monostearate, microcrystalline wax, and glyceryl distearate either individually or in combination to achieve sustained release capsule 250 mg. In successful formulation 20% drug coated pellets and 80% wax coated pellets were taken. Wax coated pellets for successful formulation contained coating of microcrystalline wax and glyceryl distearate on drug coated pellets of the same concentration of 1.6% w/w. Successful formulated sustained release capsule 250 mg of acetazolamide was compared in in vitro study with theoretical sustained release formulation suggested by wagner and one marketed sustained release capsule 250 mg. Formulated capsule showed result superior to or on par with marketed capsule. For successful formulation pellets were filled in '1' size hard gelatin capsule and stability study was carried out in hot air over at room temperature and 45 degrees C for 5 weeks. The formulation was found stable in respect of drug content and release rate.

  5. Tuning the Properties of Polymer Capsules for Cellular Interactions.

    Science.gov (United States)

    Sun, Huanli; Cui, Jiwei; Ju, Yi; Chen, Xi; Wong, Edgar H H; Tran, Jenny; Qiao, Greg G; Caruso, Frank

    2017-07-19

    Particle-cell interactions are governed by, among other factors, the composition and surface properties of the particles. Herein, we report the preparation of various polymer capsules with different compositions and properties via atom transfer radical polymerization mediated continuous assembly of polymers (CAPATRP), where the cellular interactions of these capsules, particularly fouling and specific targeting, are examined by flow cytometry and deconvolution microscopy. Acrylated eight-arm poly(ethylene glycol) (8-PEG) and poly(N-(2-hydroxypropyl)-methacrylamide) (PHPMA) as well as methacrylated hyaluronic acid (HA), poly(glutamic acid) (PGA), and poly(methacrylic acid) (PMA) are used as macro-cross-linkers to obtain a range of polymer capsules with different compositions (PEG, PHPMA, HA, PGA, and PMA). Capsules composed of low-fouling polymers, PEG and PHPMA, show negligible association with macrophage Raw 264.7, monocyte THP-1, and HeLa cells. HA capsules, although moderately low-fouling (capsules show high cellular association toward phagocytic Raw 264.7 and THP-1 cells. These findings demonstrate the capability of the CAPATRP technique in preparing polymer capsules with specific cellular interactions.

  6. Albumin/asparaginase capsules prepared by ultrasound to retain ammonia.

    Science.gov (United States)

    Tinoco, Ana; Ribeiro, Artur; Oliveira, César; Parpot, Pier; Gomes, Andreia; Cavaco-Paulo, Artur

    2016-11-01

    Asparaginase reduces the levels of asparagine in blood, which is an essential amino acid for the proliferation of lymphoblastic malign cells. Asparaginase converts asparagine into aspartic acid and ammonia. The accumulation of ammonia in the bloodstream leads to hyperammonemia, described as one of the most significant side effects of asparaginase therapy. Therefore, there is a need for asparaginase formulations with the potential to reduce hyperammonemia. We incorporated 2 % of therapeutic enzyme in albumin-based capsules. The presence of asparaginase in the interface of bovine serum albumin (BSA) capsules showed the ability to hydrolyze the asparagine and retain the forming ammonia at the surface of the capsules. The incorporation of Poloxamer 407 in the capsule formulation further increased the ratio aspartic acid/ammonia from 1.92 to 2.46 (and 1.10 from the free enzyme), decreasing the levels of free ammonia. This capacity to retain ammonia can be due to electrostatic interactions and retention of ammonia at the surface of the capsules. The developed BSA/asparaginase capsules did not cause significant cytotoxic effect on mouse leukemic macrophage cell line RAW 264.7. The new BSA/asparaginase capsules could potentially be used in the treatment of acute lymphoblastic leukemia preventing hyperammonemia associated with acute lymphoblastic leukemia (ALL) treatment with asparaginase.

  7. Patency(C) and agile(C) capsules

    Institute of Scientific and Technical Information of China (English)

    àngel Caunedo-àlvarez; Javier Romero-Vazquez; Juan M Herrerias-Gutierrez

    2008-01-01

    Small bowel strictures can be missed by current diagnostic methods.The Patency capsule is a new non-endoscopic dissolvable capsule which has as an objective of checking the patency of digestive tract,in a non-invasive manner.The available clinical trials have demonstrated that the Patency(C) capsule is a good tool for assessment of the functional patency of the small bowel,and it allows identification of those patients who can safely undergo a capsule endoscopy,despite clinical and radiographic evidence of small-bowel obstruction.Some cases of intestinal occlusion have been reported with the Patency(C) capsule,four of them needed surgery.So,a new capsule with two timer plugs (Agile(C) capsule) has been recently developed in order to minimize the risk of occlusion.This new device stars its dissolution process earlier (30 h after ingestion) and its two timer plugs have been designed to begin the disintegration even when the device is blocked in a tight stricture.

  8. Emerging Issues and Future Developments in Capsule Endoscopy.

    Science.gov (United States)

    Slawinski, Piotr R; Obstein, Keith L; Valdastri, Pietro

    2015-01-01

    Capsule endoscopy (CE) has transformed from a research venture into a widely used clinical tool and the primary means for diagnosing small bowel pathology. These orally administered capsules traverse passively through the gastrointestinal tract via peristalsis and are used in the esophagus, stomach, small bowel, and colon. The primary focus of CE research in recent years has been enabling active CE manipulation and extension of the technology to therapeutic functionality; thus, widening the scope of the procedure. This review outlines clinical standards of the technology as well as recent advances in CE research. Clinical capsule applications are discussed with respect to each portion of the gastrointestinal tract. Promising research efforts are presented with an emphasis on enabling active capsule locomotion. The presented studies suggest, in particular, that the most viable solution for active capsule manipulation is actuation of a capsule via exterior permanent magnet held by a robot. Developing capsule procedures adhering to current healthcare standards, such as enabling a tool channel or irrigation in a therapeutic device, is a vital phase in the adaptation of CE in the clinical setting.

  9. Current Clinical Indications for Small Bowel Capsule Endoscopy.

    Science.gov (United States)

    Rosa, Bruno; Cotter, José

    2015-01-01

    Small bowel capsule endoscopy is currently the first line diagnostic examination for many diseases affecting the small bowel. This article aims to review and critically address the current indications of small bowel capsule endoscopy in clinical practice. Bibliographic review of relevant and recent papers indexed in PubMed. Small bowel capsule endoscopy enables a non-invasive full-assessment of the small bowel mucosa, with high diagnostic yield even for subtle lesions. In patients with obscure gastrointestinal bleeding, diagnostic yield is higher when performed early after the onset of bleeding. Endoscopic treatment of angioectasias using balloon-assisted enteroscopy may contribute to reduce rebleeding, while the risk of rebleeding in patients with 'negative' small bowel capsule endoscopy is debatable. Cross-sectional imaging may be more accurate than small bowel capsule endoscopy for the diagnosis of large small bowel tumors. The Smooth Protruding Index on Capsule Endoscopy (SPICE score) may help to differentiate submucosal tumors from innocent bulges. Small bowel capsule endoscopy is also a key diagnostic instrument in patients with suspected Crohn's disease and non-diagnostic ileocolonoscopy; it may also influence prognosis and therapeutic management, by determining disease extent and activity in patients with known Crohn's disease. The role of small bowel capsule endoscopy to investigate possible complications in patients with non-responsive coeliac disease is evolving. Small bowel capsule endoscopy is a valuable diagnostic instrument for patients with obscure gastrointestinal bleeding and/or suspected small bowel tumors; it may also be a key examination in patients with suspected Crohn's disease, or patients with known Crohn's disease to fully assess disease extension and activity; finally, it may contribute for the diagnosis of complications of non-responsive coeliac disease.

  10. Solid State Stability of Extemporaneously Prepared Levothyroxine Aliquots and Capsules.

    Science.gov (United States)

    Fortner, Jeff; Salton, Jason; Carlson, Christie; Wheeler, Rich; Cote, Brianna; Rao, Deepa

    2015-01-01

    The purpose of this research was to collect, analyze, and compare stability data for levothyroxine (T4) powder in the anhydrous and pentahydrate form when prepared as an aliquot and in capsules. Two different compounding pharmacies, Central Iowa Compounding and Gateway Medical Pharmacy, used different forms of T4 and aliquot formulations, which were studied to determine the beyond-use date at ±5% or ±10% of labeled strength. T4 was extracted from aliquot and capsule formulations and assessed using reverse-phase high- performance liquid chromatography validated to differentiate between the degraded and original forms of T4. The results indicate that T4 1:100 aliquot formulation prepared with silica gel or Avicel as filler are stable for 120 days at ±10% labeled potency, but at ±5% labeled potency, the silica gel and Avicel aliquot formulations are stable for 45 and 30 days, respectively. The silica gel capsules prepared from fresh aliquot were stable for 120 days at ±10% labeled potency and 90 days at ±5% labeled potency, while the Avicel capsules prepared from fresh aliquot were stable for 180 days at both ±10% and ±5% labeled potency. Avicel capsules prepared from old aliquot (120 days) and fresh aliquot (1 day) were also compared for stability. The old aliquot Avicel capsules were stable for 14 days at ±5% labeled potency and 150 days at ±10% labeled potency, while new aliquot Avicel capsules were stable for 180 days at both ±10% and ±5% labeled potency. Based on our data, there can be significant variation in the beyond-use dates assigned to T4 capsules based on the diluents used for aliquots, the final capsule formulations, and the potency standards applied. These results also indicate that pharmacists must exercise caution when using older aliquots and may have to assign shorter beyond-use dates.

  11. Bionic intraocular lens with variable focus and integrated structure

    Science.gov (United States)

    Liang, Dan; Wang, Xuan-Yin; Du, Jia-Wei; Xiang, Ke

    2015-10-01

    This paper proposes a bionic accommodating intraocular lens (IOL) for ophthalmic surgery. The designed lens has a solid-liquid mixed integrated structure, which mainly consists of a support ring, elastic membrane, rigid lens, and optical liquid. The lens focus can be adjusted through the deformation of the lens front surface when compressed. The integrated structure of the IOL is presented, as well as a detailed description of the lens materials and fabrication process. Images under different radial pressures are captured, and the lens deformation process, accommodating range, density, and optical property are analyzed. The designed lens achieves a 14.6 D accommodating range under a radial pressure of 51.4 mN and a 0.24 mm alteration of the lens outer radius. The deformation property of the lens matches well with the characteristic of the eye and shows the potential to help patients fully recover their vision accommodation ability after the cataract surgery.

  12. Researches on Magnetic Localization for Detecting Capsule in Gastrointestinal Tract

    Institute of Scientific and Technical Information of China (English)

    HE Wen-hui; YAN Guo-zheng; GUO Xu-dong; WANG Kun-dong

    2007-01-01

    Recently, the capsule detection for examination of gastrointestinal (GI) tract became a novel noninvasive system, but it was still a problem for capsule's location.This paper examined various technologies used for measuring position based on magnetic method of the capsule in GI tract, while some new methods were investigated and their efficiency and complexity were analyzed.The results show that the radio frequency location is only practicable, but the tri-coil stimulating magnetic method and magnetic marker method can help to acquire a high precise, simplified, efficient and localized device.

  13. Characterisation of two AGATA asymmetric high purity germanium capsules

    Energy Technology Data Exchange (ETDEWEB)

    Colosimo, S.J., E-mail: sjc@ns.ph.liv.ac.uk [Department of Physics, Oliver Lodge Laboratory, University of Liverpool, Liverpool L69 7ZE (United Kingdom); Moon, S.; Boston, A.J.; Boston, H.C.; Cresswell, J.R.; Harkness-Brennan, L.; Judson, D.S. [Department of Physics, Oliver Lodge Laboratory, University of Liverpool, Liverpool L69 7ZE (United Kingdom); Lazarus, I.H. [STFC Daresbury, Daresbury, Warrington WA4 4AD (United Kingdom); Nolan, P.J. [Department of Physics, Oliver Lodge Laboratory, University of Liverpool, Liverpool L69 7ZE (United Kingdom); Simpson, J. [STFC Daresbury, Daresbury, Warrington WA4 4AD (United Kingdom); Unsworth, C. [Department of Physics, Oliver Lodge Laboratory, University of Liverpool, Liverpool L69 7ZE (United Kingdom)

    2015-02-11

    The AGATA spectrometer is an array of highly segmented high purity germanium detectors. The spectrometer uses pulse shape analysis in order to track Compton scattered γ-rays to increase the efficiency of nuclear spectroscopy studies. The characterisation of two high purity germanium detector capsules for AGATA of the same A-type has been performed at the University of Liverpool. This work will examine the uniformity of performance of the two capsules, including a comparison of the resolution and efficiency as well as a study of charge collection. The performance of the capsules shows good agreement, which is essential for the efficient operation of the γ-ray tracking array.

  14. Conjunctival Microbiome Changes Associated With Soft Contact Lens and Orthokeratology Lens Wearing.

    Science.gov (United States)

    Zhang, Haikun; Zhao, Fuxin; Hutchinson, Diane S; Sun, Wenfeng; Ajami, Nadim J; Lai, Shujuan; Wong, Matthew C; Petrosino, Joseph F; Fang, Jianhuo; Jiang, Jun; Chen, Wei; Reinach, Peter S; Qu, Jia; Zeng, Changqing; Zhang, Dake; Zhou, Xiangtian

    2017-01-01

    Usage of different types of contact lenses is associated with increased risk of sight-threatening complications. Changes in the ocular microbiome caused by contact lens wear are suggested to affect infection development in those individuals. To address this question, this study compares conjunctival microbial communities in contact lens wearers with those in noncontact lens wearers. Paired-end sequencing of the V3 region of the 16S rRNA gene was used to characterize the bacterial communities on the conjunctival surfaces of contact lens wearers and nonwearers. No differences in microbial diversity were detected between contact lens wearers and nonwearers. Nevertheless, some slight microbe variability was evident between these two different groups. Bacillus, Tatumella and Lactobacillus abundance was less in orthokeratology lens (OKL) wearers than in nonwearers. In soft contact lenses (SCL) wearers, Delftia abundance decreased whereas Elizabethkingia levels increased. The difference in the SCL and nonwearer group was smaller than that in the OKL group. Variations in the conjunctival taxonomic composition between SCL wearers were larger than those in other groups. Sex differences in the conjunctival microbiota makeup were only evident among nonwearers. Even though there were slight percentage changes between contact lens wearers and nonwearers in some microbes, there were no differences in their diversity. On the other hand, contact lens usage might cause relative abundance of some taxa to change. Our results will help assess whether or not conjunctival microbiome changes caused by contact lens wear affect infection risk.

  15. Variable-focus cylindrical liquid lens array

    Science.gov (United States)

    Zhao, Wu-xiang; Liang, Dong; Zhang, Jie; Liu, Chao; Zang, Shang-fei; Wang, Qiong-hua

    2013-06-01

    A variable-focus cylindrical liquid lens array based on two transparent liquids of different refractive index is demonstrated. An elastic membrane divides a transparent reservoir into two chambers. The two chambers are filled with liquid 1 and liquid 2, respectively, which are of different refractive index. The micro-clapboards help liquid 1, liquid 2 and the elastic membrane form a cylindrical lens array. Driving these two liquids to flow can change the shape of the elastic membrane as well as the focal length. In this design, the gravity effect of liquid can be overcome. A demo lens array of positive optical power is developed and tested. Moreover, a potential application of the proposed lens array for autostereoscopic 3D displays is emphasized.

  16. Role of Aquaporin 0 in lens biomechanics

    Energy Technology Data Exchange (ETDEWEB)

    Sindhu Kumari, S.; Gupta, Neha [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); Shiels, Alan [Washington University School of Medicine, St. Louis, MO (United States); FitzGerald, Paul G. [Cell Biology and Human Anatomy, School of Medicine, University of California, Davis, CA (United States); Menon, Anil G. [University of Cincinnati College of Medicine, Cincinnati, OH (United States); Mathias, Richard T. [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States); Varadaraj, Kulandaiappan, E-mail: kulandaiappan.varadaraj@stonybrook.edu [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States)

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5{sup −/−}), AQP0 KO (heterozygous KO: AQP0{sup +/−}; homozygous KO: AQP0{sup −/−}; all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0{sup +/−} lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and

  17. Ensuring Safe Use of Contact Lens Solution

    Science.gov (United States)

    ... evaluating contact lens solutions and the development of Acanthamoeba keratitis, a rare but serious eye infection that's ... contact lenses to water has been associated with Acanthamoeba keratitis, a corneal infection that is resistant to ...

  18. Role of Aquaporin 0 in lens biomechanics.

    Science.gov (United States)

    Sindhu Kumari, S; Gupta, Neha; Shiels, Alan; FitzGerald, Paul G; Menon, Anil G; Mathias, Richard T; Varadaraj, Kulandaiappan

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5(-/-)), AQP0 KO (heterozygous KO: AQP0(+/-); homozygous KO: AQP0(-/-); all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0(+/-) lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and together they help to confer

  19. Veselago lens by photonic hyper-crystals

    CERN Document Server

    Huang, Zun

    2014-01-01

    An imaging system functioning as a Veselago lens has been proposed based on the novel concept of photonic "hyper-crystal" -- an artificial optical medium synthesizing the properties of hyperbolic materials and photonic crystals. This Veselago lens shows a nearly constant negative refractive index and substantially reduced image aberrations. It can find potential applications in photolithography and hot-spots detection of silicon-based integrated circuits.

  20. Lens Design Using Group Indices of Refraction

    Science.gov (United States)

    Vaughan, A. H.

    1995-01-01

    An approach to lens design is described in which the ratio of the group velocity to the speed of light (the group index) in glass is used, in conjunction with the more familiar phase index of refraction, to control certain chromatic properties of a system of thin lenses in contact. The first-order design of thin-lens systems is illustrated by examples incorporating the methods described.

  1. In vivo human crystalline lens topography

    OpenAIRE

    Ortiz, Sergio; Pérez Merino, Pablo; Gambra, Enrique; Castro, Alberto; Marcos, Susana

    2012-01-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye ...

  2. Environmental standards for intraocular lens implantation.

    Science.gov (United States)

    Crawford, B A; Kaufman, D V

    1984-02-01

    Successful implantation of prosthetic devices depends upon their freedom from postoperative inflammation and infection. Techniques and lessons learned in orthopaedic and other implant surgery should be applied to intraocular lens implantation. The avoidance of contamination by particles and micro-organisms is one essential principle of the surgical procedure. Practical steps are described to reduce both types of contamination. These measures taken together are recommended for adoption as a standard of environmental safety for lens implantation.

  3. A Spectrometer Based on Diffractive Lens

    Institute of Scientific and Technical Information of China (English)

    WANG Daoyi; YAN Yingbai; JIN Guofan; WU Minxian

    2001-01-01

    A novel spectrometer is designed based on diffractive lens. It is essentially a flat field spectrometer. All the focal points are along the optical axis. Besides, all the asymmetrical aberrations vanish in our mounting. Thus low aberration can be obtained. In this article a diffractive lens is modeled as a special grating and analyzed by using a grating-based method. And a stigmatic point is introduced to reduce the aberrations.

  4. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    OpenAIRE

    Elena Bonafonte Marquez; Sergio Bonafonte Royo

    2015-01-01

    We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL) implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for i...

  5. Introduction to the development of intraocular lens

    Science.gov (United States)

    Li, Yifan; Peng, Runling; Hu, Shuilan; Wei, Maowei; Chen, Jiabi

    2013-08-01

    In order to cure the cataract disease or injuries in eyes, intraocular lens(IOL) has been studied all the time to replace the crystalline lens in human eyes. Researches on IOL are started early from 19th century, and it develops greatly in the hundreds years after. This article introduces several main kinds of IOLs that appear in the development history of IOL, and raises the double-liquid zoom IOL based on electrowetting, which will be the trend of IOL study.

  6. Evolution and the Calcite Eye Lens

    CERN Document Server

    Williams, Vernon L

    2013-01-01

    Calcite is a uniaxial, birefringent crystal, which in its optically transparent form, has been used for animal eye lenses, the trilobite being one such animal. Because of the calcite birefringence there is a difficulty in using calcite as a lens. When the propagation direction of incoming light is not exactly on the c-axis, the mages blur. In this paper, calcite blurring is evaluated, and the non-blurring by a crystallin eye lens is compared to a calcite one.

  7. Equilibrium thickness of large liquid lenses spreading over another liquid surface.

    Science.gov (United States)

    Sebilleau, Julien

    2013-10-01

    This article discusses the equilibrium states and more particularly the equilibrium thickness of large lenses of a liquid spread over the surface of a denser liquid. Both liquids are supposed to be nonvolatile and immiscible. Taking into account the effect of intermolecular forces in addition to the sign of the spreading parameters leads to four possible states. The three first are similar to the states of equilibrium of a liquid spread on a solid surface: total wetting where the floating liquid spreads until it reaches an equilibrium thickness on the order of the molecular size, partial wetting where the floating liquid forms a lens of macroscopic thickness in equilibrium with a "dry" bath, and pseudopartial wetting where the floating liquid spreads as a lens of macroscopic thickness in equilibrium with a thin film covering the bath. The last regime, called pseudototal wetting, consists of a macroscopic lens of the floating liquid covered with a thin film of the bath. These four regimes are described through a free-energy minimization, and their equilibrium thicknesses are predicted. A comparison of this model with experimental results available in the literature and dedicated experiments for the pseudototal wetting state are reported.

  8. 77 FR 66621 - Draft Guidance for Industry on Bioequivalence Recommendation for Lenalidomide Capsules; Availability

    Science.gov (United States)

    2012-11-06

    ... for Lenalidomide Capsules; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice... lenalidomide capsules. The draft guidance is a revised version of a previously published draft guidance on the... availability of revised draft BE recommendations for lenalidomide capsules. Revlimid (lenalidomide capsules...

  9. Design and synthesis of organic-inorganic hybrid capsules for biotechnological applications.

    Science.gov (United States)

    Shi, Jiafu; Jiang, Yanjun; Wang, Xiaoli; Wu, Hong; Yang, Dong; Pan, Fusheng; Su, Yanlei; Jiang, Zhongyi

    2014-08-07

    Organic-inorganic hybrid capsules, which typically possess a hollow lumen and a hybrid wall, have emerged as a novel and promising class of hybrid materials and have attracted enormous attention. In comparison to polymeric capsules or inorganic capsules, the hybrid capsules combine the intrinsic physical/chemical properties of the organic and inorganic moieties, acquire more degrees of freedom to manipulate multiple interactions, create hierarchical structures and integrate multiple functionalities. Thus, the hybrid capsules exhibit superior mechanical strength (vs. polymeric capsules) and diverse functionalities (vs. inorganic capsules), which may give new opportunities to produce high-performance materials. Much effort has been devoted to exploring innovative and effective methods for the synthesis of hybrid capsules that exhibit desirable performance in target applications. This tutorial review firstly presents a brief description of the capsular structure and hybrid materials in nature, then classifies the hybrid capsules into molecule-hybrid capsules and nano-hybrid capsules based upon the size of the organic and inorganic moieties in the capsule wall, followed by a detailed discussion of the design and synthesis of the hybrid capsules. For each kind of hybrid capsule, the state-of-the-art synthesis methods are described in detail and a critical comment is embedded. The applications of these hybrid capsules in biotechnological areas (biocatalysis, drug delivery, etc.) have also been summarized. Hopefully, this review will offer a perspective and guidelines for the future research and development of hybrid capsules.

  10. Fabrication of a 77 GHz Rotman Lens on a High Resistivity Silicon Wafer Using Lift-Off Process

    Directory of Open Access Journals (Sweden)

    Ali Attaran

    2014-01-01

    Full Text Available Fabrication of a high resistivity silicon based microstrip Rotman lens using a lift-off process has been presented. The lens features 3 beam ports, 5 array ports, 16 dummy ports, and beam steering angles of ±10 degrees. The lens was fabricated on a 200 μm thick high resistivity silicon wafer and has a footprint area of 19.7 mm × 15.6 mm. The lens was tested as an integral part of a 77 GHz radar where a tunable X band source along with an 8 times multiplier was used as the RF source and the resulting millimeter wave signal centered at 77 GHz was radiated through a lens-antenna combination. A horn antenna with a downconverter harmonic mixer was used to receive the radiated signal and display the received signal in an Advantest R3271A spectrum analyzer. The superimposed transmit and receive signal in the spectrum analyzer showed the proper radar operation confirming the Rotman lens design.

  11. Refractive Outcomes of Three-Port Lens-Sparing Vitrectomy for Retinopathy of Prematurity (An AOS Thesis)

    Science.gov (United States)

    Holz, Eric R.

    2009-01-01

    Purpose: To study the refractive outcomes of 3-port lens-sparing vitrectomy (LSV) for subtotal retinal detachments due to retinopathy of prematurity (ROP). Lens-sparing vitrectomy may provide superior refractive outcomes by limiting induced myopia of prematurity. Methods: This is a retrospective, consecutive, nonrandomized, comparative (paired eye) study. Entrance criteria were previous complete ablative laser for threshold ROP in both eyes, followed by LSV in one eye for stage 4A traction retinal detachment. Both eyes then maintained complete retinal attachment. Main outcome variables were cycloplegic refraction, keratometry, and biometric values for axial length, lens thickness, and anterior chamber depth. Results: Nine patients met inclusion criteria. Lens-sparing vitrectomy eyes were significantly less myopic than control eyes (−6.78 D vs −10.33 D, P < .005). The reduction in myopia in LSV eyes was predominantly due to increased anterior chamber depth (3.81 mm ± 0.217 vs 2.96 mm ± 0.232, P < .005). There was a minor contribution from reduced corneal power in LSV eyes (43.89 D ± 0.253 vs 44.20 D ± 0.265, P < .005). There was a minor negative impact from increased lens thickness in LSV eyes (3.85 ± 0.32 mm vs 3.74 ± 0.31, P < .005). There was no significant difference in axial length or lens power between the LSV and control groups. Conclusions: The data demonstrate that infant eyes undergoing 3-port LSV for stage 4A ROP develop less myopia than fellow eyes treated with laser alone. The difference is due to posterior displacement of the lens-iris diaphragm with a smaller contribution from reduced corneal power. The reduction in myopia may improve functional outcomes following 3-port LSV for stage 4A ROP. PMID:20126504

  12. Morphological Findings of Intraocular Lens with Haptics Detached from Optics Following Cataract Surgery.

    Science.gov (United States)

    Suzuki, Yukihiko; Suzuki, Kaori; Metok, Tomomi; Nakazawai, Mitsuru

    2010-03-09

    A 55-year-old woman was treated using phacoemulsification, aspiration, and intraocular lens (IOL) implantation. Three months after surgery, the optical zone of the anterior capsule was completely closed due to strong capsular contractions. As the two haptics were found to be completely detached from the optics, the IOL was subsequently extracted and morphologically examined. Although the optics and haptics of the IOL when viewed with a stereomicroscope appeared to have no marked damage on their surfaces, an ultra-structural examination showed that a portion of the acrylic optics on the detached surface was defective. We considered that the IOL haptics might have become detached from the optics due to continuous force from postoperative capsular contractions.

  13. [Candida infiltrations in the iris and lens during iritis and situation after sepsis].

    Science.gov (United States)

    Kuerten, D; Fuest, M; Mazinani, B; Walter, P; Plange, N

    2017-01-31

    Intraocular Candida infections are overall rather rare; nevertheless they are often found as endogenous infections after Candida sepsis and can be sight-threatening. The most common manifestations are either a sole chorioretinitis or an endophthalmitis. Here we report the case of a 35-year-old man developing Candida infiltrations in the lens capsule and behind the iris after corticosteroid treatment of a presumed HLA-B27-positive iritis. The patient suffered from a life-threatening intensive care stay with positive Candida blood cultures earlier after intestinal perforation. With systemic intracameral and topical voriconazole, the infection was successfully treated. In patients with positive blood samples for Candida, topical and systemic corticosteroids should be given with care even months after the last positive blood cultures.

  14. Goat′s eye integrated with a human cataractous lens: A training model for phacoemulsification

    Directory of Open Access Journals (Sweden)

    Sabyasachi Sengupta

    2015-01-01

    Full Text Available A relatively simple and inexpensive technique to train surgeons in phacoemulsification using a goat′s eye integrated with a human cataractous nucleus is described. The goat′s eye is placed on a bed of cotton within the lumen of a cylindrical container. This is then mounted on a rectangular thermocol so that the limbus is presented at the surgical field. After making a clear corneal entry with a keratome, the trainer makes a 5-5.5 mm continuous curvilinear capsulorhexis in the anterior lens capsule, creates a crater of adequate depth in the cortex and inserts the human nucleus within this crater in the goat′s capsular bag. The surgical wound is sutured, and the goat′s eye is ready for training. Creating the capsulorhexis with precision and making the crater of adequate depth to snugly accommodate the human nucleus are the most important steps to prevent excessive wobbling of the nucleus while training.

  15. Photon nanojet lens: design, fabrication and characterization

    Science.gov (United States)

    Xu, Chen; Zhang, Sichao; Shao, Jinhai; Lu, Bing-Rui; Mehfuz, Reyad; Drakeley, Stacey; Huang, Fumin; Chen, Yifang

    2016-04-01

    In this paper, a novel nanolens with super resolution, based on the photon nanojet effect through dielectric nanostructures in visible wavelengths, is proposed. The nanolens is made from plastic SU-8, consisting of parallel semi-cylinders in an array. This paper focuses on the lens designed by numerical simulation with the finite-difference time domain method and nanofabrication of the lens by grayscale electron beam lithography combined with a casting/bonding/lift-off transfer process. Monte Carlo simulation for injected charge distribution and development modeling was applied to define the resultant 3D profile in PMMA as the template for the lens shape. After the casting/bonding/lift-off process, the fabricated nanolens in SU-8 has the desired lens shape, very close to that of PMMA, indicating that the pattern transfer process developed in this work can be reliably applied not only for the fabrication of the lens but also for other 3D nanopatterns in general. The light distribution through the lens near its surface was initially characterized by a scanning near-field optical microscope, showing a well defined focusing image of designed grating lines. Such focusing function supports the great prospects of developing a novel nanolithography based on the photon nanojet effect.

  16. Lens Biology is a Dimension of Neurobiology.

    Science.gov (United States)

    Frederikse, Peter; Kasinathan, Chinnaswamy

    2017-02-04

    There is a second cell type in your body that expresses scores of the most intensively studied genes in neuroscience and exclusively shares critical interdependent modes of molecular regulation that include a network first described as responsible for the basic bifurcation of neuronal from non-neuronal gene expression in vertebrates. Neurons and lens cells are among the most ancient animal cell types, yet neurons have an exclusive status also attributed to roles underlying sensation, movement, and cognition. However, this status is challenged by cells in the lens of the eye. The extent and detail of internally consistent parallels with neuron biology now catalogued in their second native cell type in the lens provide a detailed model of interdependent neuron gene expression in lens development and non-neuronal role in vision. These comprehensive parallels identify the lens as a dimension of neurobiology and a fundamental new perspective on neurodevelopment and its disorders. Finally, this understanding identifies that hallmark neuronal gene expression and key modes of associated molecular regulation evolved in tandem in the lens.

  17. Improvement of Uveal and Capsular Biocompatibility of Hydrophobic Acrylic Intraocular Lens by Surface Grafting with 2-Methacryloyloxyethyl Phosphorylcholine-Methacrylic Acid Copolymer

    Science.gov (United States)

    Tan, Xuhua; Zhan, Jiezhao; Zhu, Yi; Cao, Ji; Wang, Lin; Liu, Sa; Wang, Yingjun; Liu, Zhenzhen; Qin, Yingyan; Wu, Mingxing; Liu, Yizhi; Ren, Li

    2017-01-01

    Biocompatibility of intraocular lens (IOL) is critical to vision reconstruction after cataract surgery. Foldable hydrophobic acrylic IOL is vulnerable to the adhesion of extracellular matrix proteins and cells, leading to increased incidence of postoperative inflammation and capsule opacification. To increase IOL biocompatibility, we synthesized a hydrophilic copolymer P(MPC-MAA) and grafted the copolymer onto the surface of IOL through air plasma treatment. X-ray photoelectron spectroscopy, atomic force microscopy and static water contact angle were used to characterize chemical changes, topography and hydrophilicity of the IOL surface, respectively. Quartz crystal microbalance with dissipation (QCM-D) showed that P(MPC-MAA) modified IOLs were resistant to protein adsorption. Moreover, P(MPC-MAA) modification inhibited adhesion and proliferation of lens epithelial cells (LECs) in vitro. To analyze uveal and capsular biocompatibility in vivo, we implanted the P(MPC-MAA) modified IOLs into rabbits after phacoemulsification. P(MPC-MAA) modification significantly reduced postoperative inflammation and anterior capsule opacification (ACO), and did not affect posterior capsule opacification (PCO). Collectively, our study suggests that surface modification by P(MPC-MAA) can significantly improve uveal and capsular biocompatibility of hydrophobic acrylic IOL, which could potentially benefit patients with blood-aqueous barrier damage. PMID:28084469

  18. Conservation through the economics lens.

    Science.gov (United States)

    Farley, Joshua

    2010-01-01

    Although conservation is an inherently transdisciplinary issue, there is much to be gained from examining the problem through an economics lens. Three benefits of such an approach are laid out in this paper. First, many of the drivers of environmental degradation are economic in origin, and the better we understand them, the better we can conserve ecosystems by reducing degradation. Second, economics offers us a when-to-stop rule, which is equivalent to a when-to-conserve rule. All economic production is based on the transformation of raw materials provided by nature. As the economic system grows in physical size, it necessarily displaces and degrades ecosystems. The marginal benefits of economic growth are diminishing, and the marginal costs of ecological degradation are increasing. Conceptually, we should stop economic growth and focus on conservation when the two are equal. Third, economics can help us understand how to efficiently and justly allocate resources toward conservation, and this paper lays out some basic principles for doing so. Unfortunately, the field of economics is dominated by neoclassical economics, which builds an analytical framework based on questionable assumptions and takes an excessively disciplinary and formalistic approach. Conservation is a complex problem, and analysis from individual disciplinary lenses can make important contributions to conservation only when the resulting insights are synthesized into a coherent vision of the whole. Fortunately, there are a number of emerging transdisciplines, such as ecological economics and environmental management, that are dedicated to this task.

  19. Subwavelength-thick Lenses with High Numerical Apertures and Large Efficiency Based on High Contrast Transmitarrays

    CERN Document Server

    Arbabi, Amir; Ball, Alexander J; Bagheri, Mahmood; Faraon, Andrei

    2014-01-01

    We report subwavelength-thick, polarization insensitive micro-lenses operating at telecom wavelength with focal spots as small as 0.57 wavelengths and measured focusing efficiency up to 82%. The lens design is based on high contrast transmitarrays that enable control of optical phase fronts with subwavelength spatial resolution. A rigorous method for ultra-thin lens design, and the trade-off between high efficiency and small spot size (or large numerical aperture) are discussed. The transmitarrays, composed of silicon nano-posts on glass, could be fabricated by high-throughput photo or nanoimprint lithography, thus enabling widespread adoption.

  20. Emerging methods for the fabrication of polymer capsules.

    Science.gov (United States)

    Cui, Jiwei; van Koeverden, Martin P; Müllner, Markus; Kempe, Kristian; Caruso, Frank

    2014-05-01

    Hollow polymer capsules are attracting increasing research interest due to their potential application as drug delivery vectors, sensors, biomimetic nano- or multi-compartment reactors and catalysts. Thus, significant effort has been directed toward tuning their size, composition, morphology, and functionality to further their application. In this review, we provide an overview of emerging techniques for the fabrication of polymer capsules, encompassing: self-assembly, layer-by-layer assembly, single-step polymer adsorption, bio-inspired assembly, surface polymerization, and ultrasound assembly. These techniques can be applied to prepare polymer capsules with diverse functionality and physicochemical properties, which may fulfill specific requirements in various areas. In addition, we critically evaluate the challenges associated with the application of polymer capsules in drug delivery systems. © 2013.

  1. [Acute caffeine intoxication after intake of 'herbal energy capsules'

    NARCIS (Netherlands)

    Kromhout, H.E.; Landstra, A.M.; Luin, M. van; Setten, P.A. van

    2008-01-01

    Two males, 15 and 17 years old respectively, presented at the Emergency Department complaining of cramping abdominal pain, nausea and vomiting after ingestion of energy capsules. Physical examination revealed sinus tachycardia and slight abdominal pain. Laboratory examination showed substantial

  2. The mechanical properties of the human hip capsule ligaments.

    Science.gov (United States)

    Hewitt, John D; Glisson, Richard R; Guilak, Farshid; Vail, T Parker

    2002-01-01

    The human hip capsule is adapted to facilitate upright posture, joint stability, and ambulation, yet it routinely is excised in hip surgery without a full understanding of its mechanical contributions. The objective of this study was to provide information about the mechanical properties of the ligaments that form the hip capsule. Cadaver bone-ligament-bone specimens of the iliofemoral, ischiofemoral, and femoral arcuate ligaments were tested to failure in tension. The hip capsule was found to be an inhomogeneous structure and should be recognized as being composed of discrete constituent ligaments. The anterior ligaments, consisting of the 2 arms of the iliofemoral ligament, were much stronger than the posterior ischiofemoral ligament, withstanding greater force at failure and exhibiting greater stiffness. Knowledge of the anatomy and mechanical properties of the capsule may help the hip surgeon choose an appropriate surgical approach or repair strategy.

  3. [Acute caffeine intoxication after intake of 'herbal energy capsules'

    NARCIS (Netherlands)

    Kromhout, H.E.; Landstra, A.M.; Luin, M. van; Setten, P.A. van

    2008-01-01

    Two males, 15 and 17 years old respectively, presented at the Emergency Department complaining of cramping abdominal pain, nausea and vomiting after ingestion of energy capsules. Physical examination revealed sinus tachycardia and slight abdominal pain. Laboratory examination showed substantial hypo

  4. Wireless capsule video endoscopy:Three years of experience

    Institute of Scientific and Technical Information of China (English)

    Rami Eliakim

    2004-01-01

    AIM: To review and summerize the current literatue regarding M2A wireless capsule endoscopy.METHODS: Peer reviewed publications regarding the use of capsule endoscopy as well as our personal experience were reviewed.RESULTS: Review of the literature dearly showed that capsule endoscopy was superior to enteroscopy, small bowel follow through and computerized tomography in patients with obscure gastrointestinal bleeding, iron deficiency anemia,or suspected Crohn′s disease. It was very sensitive for the diagnosis of small bowel tumors and for survailance of small bowel pathology in patients with Gardner syndrome or familial adenomatous polyposis syndrome. Its role in celiac disease and in patients with known Crohn′s disease was currently being investigated.CONCLUSION: Capsule video endoscopy is a superior and more sensitive diagnostic tool than barium follow through,enteroscopy and entero- CT in establishing the diagnosis of many small bowel pathologies.

  5. Capsule endoscopy of the future: What's on the horizon?

    Science.gov (United States)

    Slawinski, Piotr R; Obstein, Keith L; Valdastri, Pietro

    2015-10-01

    Capsule endoscopes have evolved from passively moving diagnostic devices to actively moving systems with potential therapeutic capability. In this review, we will discuss the state of the art, define the current shortcomings of capsule endoscopy, and address research areas that aim to overcome said shortcomings. Developments in capsule mobility schemes are emphasized in this text, with magnetic actuation being the most promising endeavor. Research groups are working to integrate sensor data and fuse it with robotic control to outperform today's standard invasive procedures, but in a less intrusive manner. With recent advances in areas such as mobility, drug delivery, and therapeutics, we foresee a translation of interventional capsule technology from the bench-top to the clinical setting within the next 10 years.

  6. Inhibition of phage infection in capsule-producing Streptococcus ...

    African Journals Online (AJOL)

    SERVER

    2007-10-04

    Oct 4, 2007 ... Acid production by capsule-producing Streptococcus thermophilus was inhibited less ... lactic acid bacteria (LAB) are of similar size to fat globules ..... Characterization of new virulent phage (MLC-A) of Lactobacillus paracasei.

  7. OUTCOME OF PHACOEMULSIFICATION WITH INTRAOCULAR LENS IMPLANTATION IN PATIENTS WITH HIGH MYOPIA

    Directory of Open Access Journals (Sweden)

    Sunil

    2015-11-01

    Full Text Available : OBJECTIVE: To evaluate the visual and refractive outcomes of phacoemulsification with intraocular lens (IOL implantation in highly myopic eyes and to assess the intraoperative and postoperative complications. SETTINGS: Tertiary care Centre Ranchi, India. METHODS: Consecutive patients with high myopia were retrospectively studied for outcomes and complications after phacoemulsification and IOL implantation. RESULTS: The study included 125 eyes of 89 patients (53 females and 36 males with a mean age of 56.01±9.51 years and mean follow-up of 19.45±4.07 months. The mean axial length was 29.58±2.57mm and power of the IOL ranged from −4.00 D to + 17.00 D. The mean preoperative logMAR Best corrected visual acuity (BCVA was 0.82±0.26 which improved to 0.38±0.29 at one month and to 0.43±0.33 at last follow-up, the improvement in vision was statistically significant (P<0.0001, paired t test. Postoperatively, 80 eyes (64% had a BCVA between 0.00 logMAR (20/20 and 0.30 logMAR (20/40. Pre-existing myopic chorioretinal degeneration (13.6% was most common factor causing decreased visual acuity. The mean spherical equivalent at one month postoperative was -0.06±1.28 D. The complications included posterior capsule rupture (5.6%, zonular dehiscence (1.6%, retinal detachment (1.6%, cystoid macular edema (8.8% and posterior capsule opacifications (10.4%. CONCLUSIONS: Phacoemulsification with intraocular lens implantation is a safe and effective procedure to improve patients visual acuity in those with high myopia.

  8. Determining the Optimum Font Size for Braille on Capsule Paper

    OpenAIRE

    Watanabe, Tetsuya

    2014-01-01

    Braille fonts allow us to easily make braille labels on capsule paper. For legibility, fonts should be printed at optimum sizes. To find the optimum sizes for Japanese braille fonts, we conducted an experiment in which a Japanese braille font was printed at various sizes on capsule paper and read and rated by young braille users. The results show that braille printed at 17 and 18 point sizes were read faster and evaluated higher than those printed at smaller or bigger sizes.

  9. Granular computing in mosaicing of images from capsule endoscopy

    OpenAIRE

    Maciura, Lukasz; Bazan, Jan G.

    2015-01-01

    This article introduces methods for modeling compound granules used in algorithms which could successfully construct a mosaic from the images coming from an endoscope capsule. In order to apply the algorithm, combined images must have a common area where the correspondence of points is determined. That allows to determine the transformation parameters to compensate movement of the capsule that occurs between moments when the mosaic images were acquired. The developed algorithm for images from...

  10. Research on Technology of Filling Sodium into Fuel Test Capsules

    Institute of Scientific and Technical Information of China (English)

    XU; Chi; XIE; Chun; WANG; Shu-xing; MI; Zheng-feng; YU; Tuan-jie; CUI; Chao; WANG; Ming-zheng

    2015-01-01

    In order to provide a high pure sodium environment for properties testing in the fuel research for fast reactor,it is essential to fill sodium into fuel testing capsules.By the method of vacuum,temperature-controlling and inert gas protection,quantificational sodium had been filled into the fuel testing capsules.Fig.1shows the schematic diagram of sodium filling device.Table 1shows

  11. Role of glucose and CcpA in capsule expression and virulence of Streptococcus suis.

    Science.gov (United States)

    Willenborg, J; Fulde, M; de Greeff, A; Rohde, M; Smith, H E; Valentin-Weigand, P; Goethe, R

    2011-06-01

    Streptococcus suis is one of the most important pathogens in pigs and is also an emerging zoonotic agent. After crossing the epithelial barrier, S. suis causes bacteraemia, resulting in meningitis, endocarditis and bronchopneumonia. Since the host environment seems to be an important regulatory component for virulence, we related expression of virulence determinants of S. suis to glucose availability during growth and to the sugar metabolism regulator catabolite control protein A (CcpA). We found that expression of the virulence-associated genes arcB, representing arcABC operon expression, cps2A, representing capsular locus expression, as well as sly, ofs, sao and epf, differed significantly between exponential and early stationary growth of a highly virulent serotype 2 strain. Deletion of ccpA altered the expression of the surface-associated virulence factors arcB, sao and eno, as well as the two currently proven virulence factors in pigs, ofs and cps2A, in early exponential growth. Global expression analysis using a cDNA expression array revealed 259 differentially expressed genes in early exponential growth, of which 141 were more highly expressed in the CcpA mutant strain 10ΔccpA and 118 were expressed to a lower extent. Interestingly, among the latter genes, 18 could be related to capsule and cell wall synthesis. Correspondingly, electron microscopy characterization of strain 10ΔccpA revealed a markedly reduced thickness of the capsule. This phenotype correlated with enhanced binding to porcine plasma proteins and a reduced resistance to killing by porcine neutrophils. Taken together, our data demonstrate that CcpA has a significant effect on the capsule synthesis and virulence properties of S. suis.

  12. Oestrogen receptor-alpha and -beta expression in breast implant capsules: experimental findings and clinical correlates.

    Science.gov (United States)

    Persichetti, Paolo; Segreto, Francesco; Carotti, Simone; Marangi, Giovanni Francesco; Tosi, Daniele; Morini, Sergio

    2014-03-01

    Myofibroblasts provide a force to decrease the surface area of breast implant capsules as the collagen matrix matures. 17-β-Oestradiol promotes myofibroblast differentiation and contraction. The aim of the study was to investigate the expression of oestrogen receptors α and β in capsular tissue. The study enrolled 70 women (80 capsules) who underwent expander or implant removal, following breast reconstruction. Specimens were stained with haematoxylin/eosin, Masson trichrome and immunohistochemistry and immunofluorescence stainings for alpha-smooth muscle actin (α-SMA), oestrogen receptor-alpha (ER-α) and oestrogen receptor-beta (ER-β). The relationship between anti-oestrogenic therapy and capsular severity was evaluated. A retrospective analysis of 233 cases of breast reconstruction was conducted. Myofibroblasts expressed ER-α, ER-β or both. In the whole sample, α-SMA score positively correlated with ER-α (p = 0.022) and ER-β expression (p < 0.004). ER-β expression negatively correlated with capsular thickness (p < 0.019). In capsules surrounding expanders α-SMA and ER-α, expressions negatively correlated with time from implantation (p = 0.002 and p = 0.016, respectively). The incidence of grade III-IV contracture was higher in patients who did not have anti-oestrogenic therapy (p < 0.036); retrospective analysis of 233 cases confirmed this finding (p < 0.0001). This study demonstrates the expression of oestrogen receptors in myofibroblasts of capsular tissue. A lower contracture severity was found in patients who underwent anti-oestrogenic therapy.

  13. Modeling gated neutron images of THD capsules

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Douglas Carl [Los Alamos National Laboratory; Grim, Gary P [Los Alamos National Laboratory; Tregillis, Ian L [Los Alamos National Laboratory; Wilke, Mark D [Los Alamos National Laboratory; Morgan, George L [Los Alamos National Laboratory; Loomis, Eric N [Los Alamos National Laboratory; Wilde, Carl H [Los Alamos National Laboratory; Oertel, John A [Los Alamos National Laboratory; Fatherley, Valerie E [Los Alamos National Laboratory; Clark, David D [Los Alamos National Laboratory; Schmitt, Mark J [Los Alamos National Laboratory; Merrill, Frank E [Los Alamos National Laboratory; Wang, Tai - Sen F [Los Alamos National Laboratory; Danly, Christopher R [Los Alamos National Laboratory; Batha, Steven H [Los Alamos National Laboratory; Patel, M [LLNL; Sepke, S [LLNL; Hatarik, R [LLNL; Fittinghoff, D [LLNL; Bower, D [LLNL; Marinak, M [LLNL; Munro, D [LLNL; Moran, M [LLNL; Hilko, R [NSTEC; Frank, M [LLNL; Buckles, R [NSTEC

    2010-01-01

    Time gating a neutron detector 28m from a NIF implosion can produce images at different energies. The brighter image near 14 MeV reflects the size and symmetry of the capsule 'hot spot'. Scattered neutrons, {approx}9.5-13 MeV, reflect the size and symmetry of colder, denser fuel, but with only {approx}1-7% of the neutrons. The gated detector records both the scattered neutron image, and, to a good approximation, an attenuated copy of the primary image left by scintillator decay. By modeling the imaging system the energy band for the scattered neutron image (10-12 MeV) can be chosen, trading off the decayed primary image and the decrease of scattered image brightness with energy. Modeling light decay from EJ399, BC422, BCF99-55, Xylene, DPAC-30, and Liquid A leads to a preference from BCF99-55 for the first NIF detector, but DPAC 30 and Liquid A would be preferred if incorporated into a system. Measurement of the delayed light from the NIF scintillator using implosions at the Omega laser shows BCF99-55 to be a good choice for down-scattered imaging at 28m.

  14. Internal capsule stroke in the common marmoset.

    Science.gov (United States)

    Puentes, S; Kaido, T; Hanakawa, T; Ichinohe, N; Otsuki, T; Seki, K

    2015-01-22

    White matter (WM) impairment and motor deficit after stroke are directly related. However, WM injury mechanisms and their relation to motor disturbances are still poorly understood. In humans, the anterior choroidal artery (AChA) irrigates the internal capsule (IC), and stroke to this region can induce isolated motor impairment. The goal of this study was to analyze whether AChA occlusion can injure the IC in the marmoset monkey. The vascular distribution of the marmoset brain was examined by colored latex perfusion and revealed high resemblance to the human brain anatomy. Next, a new approach to electrocoagulate the AChA was developed and chronic experiments showed infarction compromising the IC on magnetic resonance imaging (MRI) scanning (day 4) and histology (day 11). Behavioral analysis was performed using a neurologic score previously developed and our own scoring method. Marmosets showed a decreased score that was still evident at day 10 after AChA electrocoagulation. We developed a new approach able to induce damage to the marmoset IC that may be useful for the detailed study of WM impairment and behavioral changes after stroke in the nonhuman primate.

  15. Capsule Endoscopy for Portal Hypertensive Enteropathy

    Directory of Open Access Journals (Sweden)

    Seong Ran Jeon

    2016-01-01

    Full Text Available Portal hypertensive enteropathy (PHE is a mucosal abnormality of the small bowel that is observed in patients with portal hypertension (PH and can lead to gastrointestinal bleeding and anemia. The pathogenesis is still not completely understood. The introduction of new endoscopic methods, including capsule endoscopy (CE or balloon-assisted enteroscopy, has increased the detection of these abnormalities. CE can also serve as a road map for deciding subsequent interventions and evaluating the treatment effect. The prevalence of PHE is reportedly 40–70% in patients with PH. Endoscopic findings can be roughly divided into vascular and nonvascular lesions such as inflammatory-like lesions. Traditionally, PHE-associated factors include large esophageal varices, portal hypertensive gastropathy or colopathy, Child-Turcotte-Pugh class B or C, a history of variceal treatment, and acute gastrointestinal bleeding. More recently, on using scoring systems, a high computed tomography or transient elastography score was reportedly PHE-related factors. However, the prevalence of PHE and its related associated factors remain controversial. The management of PHE has not yet been standardized. It should be individualized according to each patient’s situation, the availability of therapy, and each institutional expertise.

  16. Electromagnetic wave propagation of wireless capsule endoscopy in human body

    Institute of Scientific and Technical Information of China (English)

    LIM; Eng-Gee; 王炤; 陈瑾慧; TILLO; Tammam; MAN; Ka-lok

    2013-01-01

    Wireless capsule endoscopy(WCE) is a promising technique which has overcome some limitations of traditional diagnosing tools, such as the comfortlessness of the cables and the inability of examining small intestine section. However, this technique is still far from mature and asks for the feasible improvements. For example, the relatively low transmission data rate and the absence of the real-time localization information of the capsule are all important issues. The studies of them rely on the understanding of the electromagnetic wave propagation in human body. Investigation of performance of WCE communication system was carried out by studying electromagnetic(EM) wave propagation of the wireless capsule endoscopy transmission channel. Starting with a pair of antennas working in a human body mimic environment, the signal transmissions and attenuations were examined. The relationship between the signal attenuation and the capsule(transmitter) position, and direction was also evaluated. These results provide important information for real-time localization of the capsule. Moreover, the pair of antennas and the human body were treated as a transmission channel, on which the binary amplitude shift keying(BASK) modulation scheme was used. The relationship between the modulation scheme, data rate and bit error rate was also determined in the case of BASK. With the obtained studies, it make possible to provide valuable information for further studies on the selection of the modulation scheme and the real-time localization of the capsules.

  17. Pickering Emulsion-Based Marbles for Cellular Capsules

    Directory of Open Access Journals (Sweden)

    Guangzhao Zhang

    2016-07-01

    Full Text Available The biodegradable cellular capsule, being prepared from simple vaporization of liquid marbles, is an ideal vehicle for the potential application of drug encapsulation and release. This paper reports the fabrication of cellular capsules via facile vaporization of Pickering emulsion marbles in an ambient atmosphere. Stable Pickering emulsion (water in oil was prepared while utilizing dichloromethane (containing poly(l-lactic acid and partially hydrophobic silica particles as oil phase and stabilizing agents respectively. Then, the Pickering emulsion marbles were formed by dropping emulsion into a petri dish containing silica particles with a syringe followed by rolling. The cellular capsules were finally obtained after the complete vaporization of both oil and water phases. The technique of scanning electron microscope (SEM was employed to research the microstructure and surface morphology of the prepared capsules and the results showed the cellular structure as expected. An in vitro drug release test was implemented which showed a sustained release property of the prepared cellular capsules. In addition, the use of biodegradable poly(l-lactic acid and the biocompatible silica particles also made the fabricated cellular capsules of great potential in the application of sustained drug release.

  18. Bushen Yisui Capsule ameliorates axonal injury in experimental autoimmune encephalomyelitis

    Institute of Scientific and Technical Information of China (English)

    Ling Fang; Lei Wang; Qi Zheng; Tao Yang; Hui Zhao; Qiuxia Zhang; Kangning Li; Li Zhou; Haiyang Gong; Yongping Fan

    2013-01-01

    A preliminary clinical study by our group demonstrated Bushen Yisui Capsule (formerly cal ed Er-huang Formula) in combination with conventional therapy is an effective prescription for the treat-ment of multiple sclerosis. However, its effect on axonal injury during early multiple sclerosis re-mains unclear. In this study, a MOG 35-55-immunized C57BL/6 mouse model of experimental au-toimmune encephalomyelitis was intragastrical y administered Bushen Yisui Capsule. The results showed that Bushen Yisui Capsule effectively improved clinical symptoms and neurological function of experimental autoimmune encephalomyelitis. In addition, amyloid precursor protein expression was down-regulated and microtubule-associated protein 2 was up-regulated. Experimental findings indicate that the disease-preventive mechanism of Bushen Yisui Capsule in experimental autoim-mune encephalomyelitis was mediated by amelioration of axonal damage and promotion of rege-neration. But the effects of the high-dose Bushen Yisui Capsule group was not better than that of the medium-dose and low-dose Bushen Yisui Capsule group in preventing neurological dysfunction.

  19. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift

  20. Effect of infusion bottle height on lens power after lens refilling with and without a plug

    NARCIS (Netherlands)

    Koopmans, SA; Terwee, T; Haitjema, HJ; Kooijman, AC; Barkhof, J

    2003-01-01

    Purpose: To evaluate the influence of intraoperative infusion bottle height on the power of refilled pig lenses. Setting: Research Laboratory, Pharmacia Intraocular Lens Manufacturing Plant, Groningen, The Netherlands. Methods: This study comprised 2 groups of pig eyes. In 1 group, the lens was refi

  1. Gravitational binary-lens events with prominent effects of lens orbital motion

    Energy Technology Data Exchange (ETDEWEB)

    Park, H.; Han, C.; Choi, J.-Y. [Department of Physics, Institute for Astrophysics, Chungbuk National University, Cheongju 371-763 (Korea, Republic of); Udalski, A.; Szymański, M. K.; Kubiak, M.; Soszyński, I.; Pietrzyński, G.; Poleski, R.; Ulaczyk, K.; Pietrukowicz, P.; Kozłowski, S.; Skowron, J.; Wyrzykowski, Ł. [Warsaw University Observatory, Al. Ujazdowskie 4, 00-478 Warszawa (Poland); Gould, A.; Gaudi, B. S. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Beaulieu, J.-P. [Institut d' Astrophysique de Paris, UMR 7095 CNRS-Université Pierre and Marie Curie, 98bis Bd Arago, F-75014 Paris (France); Tsapras, Y. [Las Cumbres Observatory Global Telescope Network, 6740 Cortona Drive, Suite 102, Goleta, CA 93117 (United States); Depoy, D. L. [Department of Physics and Astronomy, Texas A and M University, College Station, TX 77843 (United States); Dong, Subo [Institute for Advanced Study, Einstein Drive, Princeton, NJ 08540 (United States); Collaboration: OGLE Collaboration; μFUN Collaboration; PLANET Collaboration; RoboNet Collaboration; and others

    2013-12-01

    Gravitational microlensing events produced by lenses composed of binary masses are important because they provide a major channel for determining physical parameters of lenses. In this work, we analyze the light curves of two binary-lens events, OGLE-2006-BLG-277 and OGLE-2012-BLG-0031, for which the light curves exhibit strong deviations from standard models. From modeling considering various second-order effects, we find that the deviations are mostly explained by the effect of the lens orbital motion. We also find that lens parallax effects can mimic orbital effects to some extent. This implies that modeling light curves of binary-lens events not considering orbital effects can result in lens parallaxes that are substantially different from actual values and thus wrong determinations of physical lens parameters. This demonstrates the importance of routine consideration of orbital effects in interpreting light curves of binary-lens events. It is found that the lens of OGLE-2006-BLG-277 is a binary composed of a low-mass star and a brown dwarf companion.

  2. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift c

  3. DISSECTING THE GRAVITATIONAL LENS B1608+656. I. LENS POTENTIAL RECONSTRUCTION

    NARCIS (Netherlands)

    Suyu, S. H.; Marshall, P. J.; Blandford, R. D.; Fassnacht, C. D.; Koopmans, L. V. E.; McKean, J. P.; Treu, T.

    2009-01-01

    Strong gravitational lensing is a powerful technique for probing galaxy mass distributions and for measuring cosmological parameters. Lens systems with extended source-intensity distributions are particularly useful for this purpose since they provide additional constraints on the lens potential ( m

  4. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    Directory of Open Access Journals (Sweden)

    Ladan Espandar

    2011-01-01

    Full Text Available Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular lens (IOL. The hydrophilic design of the lens is optimized to address dysphotopsia while maintaining biocompatibility, optical clarity, resistance to damage, and resistance to biocontamination. Aspheric lenses decrease postoperative spherical aberration. The addition of the Softec lens provides clinicians with another option for IOL placement; however, randomized comparative studies of this lens to others already on the market remain to be completed.Keywords: hydrophilic acrylic intraocular lens, Softec HD intraocular lens, aspheric intraocular lens, IOL

  5. An improved spinning lens test to determine the stiffness of the human lens

    Science.gov (United States)

    Burd, H.J.; Wilde, G.S.; Judge, S.J.

    2011-01-01

    It is widely accepted that age-related changes in lens stiffness are significant for the development of presbyopia. However, precise details on the relative importance of age-related changes in the stiffness of the lens, in comparison with other potential mechanisms for the development of presbyopia, have not yet been established. One contributing factor to this uncertainty is the paucity and variability of experimental data on lens stiffness. The available published data generally indicate that stiffness varies spatially within the lens and that stiffness parameters tend to increase with age. However, considerable differences exist between these published data sets, both qualitatively and quantitatively. The current paper describes new and improved methods, based on the spinning lens approach pioneered by Fisher, R.F. (1971) ‘The elastic constants of the human lens’, Journal of Physiology, 212, 147–180, to make measurements on the stiffness of the human lens. These new procedures have been developed in an attempt to eliminate, or at least substantially reduce, various systematic errors in Fisher’s original experiment. An improved test rig has been constructed and a new modelling procedure for determining lens stiffness parameters from observations made during the test has been devised. The experiment involves mounting a human lens on a vertical rotor so that the lens spins on its optical axis (typically at 1000 rpm). An automatic imaging system is used to capture the outline of the lens, while it is rotating, at pre-determined angular orientations. These images are used to quantify the deformations developed in the lens as a consequence of the centripetal forces induced by the rotation. Lens stiffness is inferred using axisymmetric finite element inverse analysis in which a nearly-incompressible neo-Hookean constitutive model is used to represent the mechanics of the lens. A numerical optimisation procedure is used to determine the stiffness parameters

  6. Corneal topography and soft contact lens fit.

    Science.gov (United States)

    Young, Graeme; Schnider, Cristina; Hunt, Chris; Efron, Suzanne

    2010-05-01

    To determine which ocular topography variables affect soft contact lens fit. Fifty subjects each wore three pairs of soft lenses in random succession (Vistakon Acuvue 2, Vistakon Acuvue Advance, Ciba Vision Night & Day), and various aspects of lens fit were evaluated. The steeper base curves of each type were worn in one eye and the flatter base curves in the other eye. Corneal topography data were collected using a Medmont E300 corneal topographer (Camberwell, Australia). Corneal curvature, shape factor (SF), and corneal height were measured over a 10 mm chord and also over the maximum measurable diameter. These were measured in the horizontal, vertical, steepest, and flattest meridians. With each lens type, the steeper base curve provided the best fit on the greatest proportion of eyes and the significant differences in various aspects of fit were noted between base curves. For each lens type, there was no significant difference in mean K-reading between those eyes best fit with the steeper base curve and those eyes best fit with the flatter base curve. Two of the lenses showed a positive correlation between centration and horizontal corneal height (maximum), whereas one lens showed a negative correlation between centration and horizontal SF (SF = e). Several lenses showed a positive correlation between post-blink movement and horizontal or vertical corneal SF. The measurement of corneal topography using current Placido disc instrumentation allows a better prediction of soft lens fit than by keratometry, but it is not reliable enough to enable accurate selection of the best fitting base curve. Some correlations are evident between corneal measurements; however, trial fitting remains the method of choice for selection of soft lens base curve.

  7. Use of pars plana vitrectomy with phacoemulsification in vitreous cavity to treat complete posterior dislocation of lens

    Directory of Open Access Journals (Sweden)

    Mutoh T

    2011-07-01

    Full Text Available Tetsuya Mutoh, Yukihiro Matsumoto, Makoto ChikudaDepartment of Ophthalmology, Dokkyo Medical University Koshigaya Hospital, Koshigaya, Saitama, JapanBackground: The purpose of this study was to evaluate pars plana vitrectomy (PPV with phacoemulsification in the vitreous cavity for treatment of complete posterior dislocation of the lens without any damage to the lens capsule.Methods: We evaluated factors such as cause of dislocation, scleral fixation of an intraocular lens (IOL, preoperative and postoperative visual acuity, corneal endothelial cell density, and intraoperative and postoperative complications.Results: Displacement in the eleven eyes studied was mostly caused by ocular trauma and was idiopathic (four eyes each. Scleral fixation of the IOL was performed in seven of the eyes during first-time PPV. Visual acuity was improved in two eyes, unchanged in eight eyes, and worse in one eye. Mean corneal endothelial cell density was 2485 cells/mm2 preoperatively and 2301 cells/mm2 postoperatively. No significant differences were seen before and after the surgeries (P = 0.15, paired t-test. Intraoperative complications included retinal detachment and suprachoroidal hemorrhage in one eye each. The most common postoperative complication was transient ocular hypertension, which occurred in three eyes. IOL dislocation and vitreous incarceration of the anterior chamber in one eye required a second operation, while retinal detachment in one eye required a third operation.Conclusion: When treating a completely dislocated lens, prevention of retinal detachment which subsequently can affect the visual prognosis is the most important factor to be addressed after PPV with intravitreal phacoemulsification.Keywords: lens dislocation, pars plana vitrectomy, phacoemulsification in the vitreous cavity, retinal detachment

  8. Prevention of capsular bag opacification with a modified hydrophilic acrylic disk-shaped intraocular lens.

    Science.gov (United States)

    Leishman, Lisa; Werner, Liliana; Bodnar, Zachary; Ollerton, Andrew; Michelson, Jennifer; Schmutz, Mason; Mamalis, Nick

    2012-09-01

    To evaluate the stability and capsular bag opacification with a modified disk-shaped 1-piece hydrophilic acrylic intraocular lens (IOL) suspended between 2 complete haptic rings connected by a pillar of the haptic material and with a commercially available 1-piece hydrophilic acrylic IOL. John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA. Experimental study. Study and control IOLs were implanted into the left eyes and right eyes of 5 New Zealand rabbits. Eyes were examined at the slitlamp from 1 through 4 weeks. At 4 weeks, the globes were enucleated and evaluated under a very-high-frequency ultrasound. Photographs were taken and capsular bag opacification scored from the posterior aspect (Miyake-Apple view), and the eyes were processed for complete histopathology. At 4 weeks, the posterior capsule opacification score was 0.0 in the study group and 1.75 ± 0.5 (SD) in the control group (P=.005, paired t test). Ultrasound examination showed that 2 of the study IOLs had no contact between the posterior optic surface and the posterior capsule. Minimal proliferative cortical material was confined to the peripheral space between anterior and posterior rings of the study IOL haptics in localized areas at the equatorial region of the capsular bag. Anterior capsule opacification was absent in all eyes. The study IOL is a modification of a previous design, incorporating haptic perforations between the peripheral rings. By maintaining an open capsular bag and enhancing endocapsular inflow of aqueous, this modified design appears to prevent capsular bag opacification. Copyright © 2012 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  9. Early clinical outcome with a new monofocal microincision intraocular lens.

    Science.gov (United States)

    Toygar, Baha; Yabas Kiziloglu, Ozge; Toygar, Okan; Hacimustafaoglu, Ali Murat

    2016-10-01

    The purpose of this study was to evaluate the early visual and refractive outcomes of a new aspheric monofocal microincision intraocular lens (IOL). This retrospective case series included eyes of patients who underwent implantation of a microincision IOL following 1.8 mm manual coaxial microincision cataract surgery and who attended regular postoperative follow-up visits on the first week and first, third, and sixth months. The postoperative uncorrected visual acuity (UCVA), best corrected visual acuity (BCVA), refraction and predictability, intraoperative and postoperative complications, posterior capsule opacification (PCO), IOL centration, and surgically induced astigmatism (SIA) were evaluated. Sixty-three eyes of 38 patients ranging in age from 51 to 86 were included in the study. The mean preoperative BCVA was 0.52 ± 0.42 logMAR. At the postoperative sixth month, the mean postoperative UCVA and BCVA were 0.12 ± 0.11 and 0.01 ± 0.03 logMAR, respectively. The mean postoperative spherical equivalent refraction (SER) was -0.30 ± 0.49 D. The SER was within ± 1.00 D of the attempted correction in 95.2 % of the eyes. The mean SIA measured with vector analysis was 0.45 ± 0.28 D. Mild PCO was observed in 9 eyes (14.7 %) with none requiring Nd:Yag laser capsulotomy. On centration analysis, the IOL was found to be 0.26 mm on average to the supero-nasal position. The aspheric microincision IOL was safely implanted and provided satisfactory visual and refractive outcomes in the early postoperative period.

  10. How thick is the lithosphere?

    Science.gov (United States)

    Kanamori, H; Press, F

    1970-04-25

    A rapid decrease in shear velocity in the suboceanic mantle is used to infer the thickness of the lithosphere. It is proposed that new and highly precise group velocity data constrain the solutions and imply a thickness near 70 km.

  11. Refractive Index Measurement of the Isolated Crystalline Lens Using Optical Coherence Tomography

    Science.gov (United States)

    Uhlhorn, Stephen R.; Borja, David; Manns, Fabrice; Parel, Jean-Marie

    2008-01-01

    An optical coherence tomography system has been developed that was designed specifically for imaging the isolated crystalline lens. Cross-sectional OCT images were recorded on 40 lenses from 32 human donors with an age range of 6 – 82 years. A method has been developed to measure the axial thickness and average refractive index of the lens from a single recorded image. The measured average group refractive index at the measurement wavelength of 825 nm was converted to the average phase refractive index at 589 nm using lens dispersion data from the literature. The average refractive index for all lenses measured was 1.408 ± 0.005 which agrees well with recent MRI measurements of the lens index gradient. A linear regression of the data resulted in a statistically significant decrease in the average refractive index with age, but a simple linear model was insufficient to explain the age dependence. The results presented here suggest that the peak refractive index in the nucleus is closer to 1.420, rather than the previously accepted value of 1.406. PMID:18824191

  12. Toward a Wirelessly Powered On-Lens Intraocular Pressure Monitoring System.

    Science.gov (United States)

    Chiou, Jin-Chern; Hsu, Shun-Hsi; Liao, Yu-Te; Huang, Yu-Chieh; Yeh, Guan-Ting; Kuei, Cheng-Kai; Dai, Kai-Shiun

    2016-09-01

    This paper presents a wireless on-lens intraocular pressure monitoring system, comprising a capacitance-to-digital converter and a wirelessly powered radio-frequency identification (RFID)-compatible communication system, for sensor control and data communication. The capacitive sensor was embedded on a soft contact lens of 200 μm thickness using commercially available biocompatible lens material, to improve compliance and reduce user discomfort. The sensor chip was shown to achieve effective number of bits greater than 10 over a capacitance range up to 50 pF while consuming only 64-μW power. The on-lens capacitive sensor could detect dielectric variation caused by changes in water content from a distance of 2 cm by using incident power from an RFID reader at 20 dBm. The maximum detectable distance was 11 cm with 30-dBm incident RF power. The rise in eye tissue temperature under 30-dBm RF exposure over an interval of 1 s was simulated and found to be less than 0.01°C.

  13. Intraocular lens power estimation by accurate ray tracing for eyes underwent previous refractive surgeries

    Science.gov (United States)

    Yang, Que; Wang, Shanshan; Wang, Kai; Zhang, Chunyu; Zhang, Lu; Meng, Qingyu; Zhu, Qiudong

    2015-08-01

    For normal eyes without history of any ocular surgery, traditional equations for calculating intraocular lens (IOL) power, such as SRK-T, Holladay, Higis, SRK-II, et al., all were relativley accurate. However, for eyes underwent refractive surgeries, such as LASIK, or eyes diagnosed as keratoconus, these equations may cause significant postoperative refractive error, which may cause poor satisfaction after cataract surgery. Although some methods have been carried out to solve this problem, such as Hagis-L equation[1], or using preoperative data (data before LASIK) to estimate K value[2], no precise equations were available for these eyes. Here, we introduced a novel intraocular lens power estimation method by accurate ray tracing with optical design software ZEMAX. Instead of using traditional regression formula, we adopted the exact measured corneal elevation distribution, central corneal thickness, anterior chamber depth, axial length, and estimated effective lens plane as the input parameters. The calculation of intraocular lens power for a patient with keratoconus and another LASIK postoperative patient met very well with their visual capacity after cataract surgery.

  14. A Wirelessly Powered Smart Contact Lens with Reconfigurable Wide Range and Tunable Sensitivity Sensor Readout Circuitry.

    Science.gov (United States)

    Chiou, Jin-Chern; Hsu, Shun-Hsi; Huang, Yu-Chieh; Yeh, Guan-Ting; Liou, Wei-Ting; Kuei, Cheng-Kai

    2017-01-07

    This study presented a wireless smart contact lens system that was composed of a reconfigurable capacitive sensor interface circuitry and wirelessly powered radio-frequency identification (RFID) addressable system for sensor control and data communication. In order to improve compliance and reduce user discomfort, a capacitive sensor was embedded on a soft contact lens of 200 μm thickness using commercially available bio-compatible lens material and a standard manufacturing process. The results indicated that the reconfigurable sensor interface achieved sensitivity and baseline tuning up to 120 pF while consuming only 110 μW power. The range and sensitivity tuning of the readout circuitry ensured a reliable operation with respect to sensor fabrication variations and independent calibration of the sensor baseline for individuals. The on-chip voltage scaling allowed the further extension of the detection range and prevented the implementation of large on-chip elements. The on-lens system enabled the detection of capacitive variation caused by pressure changes in the range of 2.25 to 30 mmHg and hydration level variation from a distance of 1 cm using incident power from an RFID reader at 26.5 dBm.

  15. Ceramic microparticles and capsules via microfluidic processing of a preceramic polymer

    Science.gov (United States)

    Ye, Congwang; Chen, Anthony; Colombo, Paolo; Martinez, Carlos

    2010-01-01

    We have developed a robust technique to fabricate monodispersed solid and porous ceramic particles and capsules from single and double emulsion drops composed of silsesquioxane preceramic polymer. A microcapillary microfluidic device was used to generate the monodispersed drops. In this device, two round capillaries are aligned facing each other inside a square capillary. Three fluids are needed to generate the double emulsions. The inner fluid, which flows through the input capillary, and the middle fluid, which flows through the void space between the square and inner fluid capillaries, form a coaxial co-flow in a direction that is opposite to the flow of the outer fluid. As the three fluids are forced through the exit capillary, the inner and middle fluids break into monodispersed double emulsion drops in a single-step process, at rates of up to 2000 drops s−1. Once the drops are generated, the silsesquioxane is cross-linked in solution and the cross-linked particles are dried and pyrolysed in an inert atmosphere to form oxycarbide glass particles. Particles with diameters ranging from 30 to 180 µm, shell thicknesses ranging from 10 to 50 µm and shell pore diameters ranging from 1 to 10 µm were easily prepared by changing fluid flow rates, device dimensions and fluid composition. The produced particles and capsules can be used in their polymeric state or pyrolysed to ceramic. This technique can be extended to other preceramic polymers and can be used to generate unique core–shell multimaterial particles. PMID:20484226

  16. Mutation in fucose synthesis gene of Klebsiella pneumoniae affects capsule composition and virulence in mice.

    Science.gov (United States)

    Pan, Po-Chang; Chen, Hui-Wen; Wu, Po-Kuan; Wu, Yu-Yang; Lin, Chun-Hung; Wu, June H

    2011-02-01

    The emerging pathogenicity of Klebsiella pneumoniae (KP) is evident by the increasing number of clinical cases of liver abscess (LA) due to KP infection. A unique property of KP is its thick mucoid capsule. The bacterial capsule has been found to contain fucose in KP strains causing LA but not in those causing urinary tract infections. The products of the gmd and wcaG genes are responsible for converting mannose to fucose in KP. A KP strain, KpL1, which is known to have a high death rate in infected mice, was mutated by inserting an apramycin-resistance gene into the gmd. The mutant expressed genes upstream and downstream of gmd, but not gmd itself, as determined by reverse transcriptase polymerase chain reaction. The DNA mapping confirmed the disruption of the gmd gene. This mutant decreased its ability to kill infected mice and showed decreased virulence in infected HepG2 cells. Compared with wild-type KpL1, the gmd mutant lost fucose in capsular polysaccharides, increased biofilm formation and interacted more readily with macrophages. The mutant displayed morphological changes with long filament forms and less uniform sizes. The mutation also converted the serotype from K1 of wild-type to K2 and weak K3. The results indicate that disruption of the fucose synthesis gene affected the pathophysiology of this bacterium and may be related to the virulence of this KpL1 strain.

  17. Capsule modeling of high foot implosion experiments on the National Ignition Facility

    Science.gov (United States)

    Clark, D. S.; Kritcher, A. L.; Milovich, J. L.; Salmonson, J. D.; Weber, C. R.; Haan, S. W.; Hammel, B. A.; Hinkel, D. E.; Marinak, M. M.; Patel, M. V.; Sepke, S. M.

    2017-05-01

    This paper summarizes the results of detailed, capsule-only simulations of a set of high foot implosion experiments conducted on the National Ignition Facility (NIF). These experiments span a range of ablator thicknesses, laser powers, and laser energies, and modeling these experiments as a set is important to assess whether the simulation model can reproduce the trends seen experimentally as the implosion parameters were varied. Two-dimensional (2D) simulations have been run including a number of effects—both nominal and off-nominal—such as hohlraum radiation asymmetries, surface roughness, the capsule support tent, and hot electron pre-heat. Selected three-dimensional simulations have also been run to assess the validity of the 2D axisymmetric approximation. As a composite, these simulations represent the current state of understanding of NIF high foot implosion performance using the best and most detailed computational model available. While the most detailed simulations show approximate agreement with the experimental data, it is evident that the model remains incomplete and further refinements are needed. Nevertheless, avenues for improved performance are clearly indicated.

  18. Age-dependence of the optomechanical responses of ex vivo human lenses from India and the USA, and the force required to produce these in a lens stretcher: the similarity to in vivo disaccommodation.

    Science.gov (United States)

    Augusteyn, Robert C; Mohamed, Ashik; Nankivil, Derek; Veerendranath, Pesala; Arrieta, Esdras; Taneja, Mukesh; Manns, Fabrice; Ho, Arthur; Parel, Jean-Marie

    2011-07-15

    The purpose of this study was to study the age-dependence of the optomechanical properties of human lenses during simulated disaccommodation in a mechanical lens stretcher, designed to determine accommodative forces as a function of stretch distance, to compare the results with in vivo disaccommodation and to examine whether differences exist between eyes harvested in the USA and India. Postmortem human eyes obtained in the USA (n=46, age=6-83 years) and India (n=91, age=1 day-85 years) were mounted in an optomechanical lens stretching system and dissected to expose the lens complete with its accommodating framework, including zonules, ciliary body, anterior vitreous and a segmented rim of sclera. Disaccommodation was simulated through radial stretching of the sectioned globe by 2mm in increments of 0.25 mm. The load, inner ciliary ring diameter, lens equatorial diameter, central thickness and power were measured at each step. Changes in these parameters were examined as a function of age, as were the dimension/load and power/load responses. Unstretched lens diameter and thickness increased over the whole age range examined and were indistinguishable from those of in vivo lenses as well as those of in vitro lenses freed from zonular attachments. Stretching increased the diameter and decreased the thickness in all lenses examined but the amount of change decreased with age. Unstretched lens power decreased with age and the accommodative amplitude decreased to zero by age 45-50. The load required to produce maximum stretch was independent of age (median 80 mN) whereas the change in lens diameter and power per unit load decreased significantly with age. The age related changes in the properties of human lenses, as observed in the lens stretching device, are similar to those observed in vivo and are consistent with the classical Helmholtz theory of accommodation. The response of lens diameter and power to disaccommodative (stretching) forces decreases with age

  19. [Representation and mathematical analysis of human crystalline lens].

    Science.gov (United States)

    Tălu, Stefan; Giovanzana, Stefano; Tălu, Mihai

    2011-01-01

    The surface of human crystalline lens can be described and analyzed using mathematical models based on parametric representations, used in biomechanical studies and 3D solid modeling of the lens. The mathematical models used in lens biomechanics allow the study and the behavior of crystalline lens on variables and complex dynamic loads. Also, the lens biomechanics has the potential to improve the results in the development of intraocular lenses and cataract surgery. The paper presents the most representative mathematical models currently used for the modeling of human crystalline lens, both optically and biomechanically.

  20. Thick-Big Descriptions

    DEFF Research Database (Denmark)

    Lai, Signe Sophus

    The paper discusses the rewards and challenges of employing commercial audience measurements data – gathered by media industries for profitmaking purposes – in ethnographic research on the Internet in everyday life. It questions claims to the objectivity of big data (Anderson 2008), the assumption...... communication systems, language and behavior appear as texts, outputs, and discourses (data to be ‘found’) – big data then documents things that in earlier research required interviews and observations (data to be ‘made’) (Jensen 2014). However, web-measurement enterprises build audiences according...... to a commercial logic (boyd & Crawford 2011) and is as such directed by motives that call for specific types of sellable user data and specific segmentation strategies. In combining big data and ‘thick descriptions’ (Geertz 1973) scholars need to question how ethnographic fieldwork might map the ‘data not seen...