WorldWideScience

Sample records for length contaminated equipment

  1. Treatment options for tank farms long-length contaminated equipment

    Energy Technology Data Exchange (ETDEWEB)

    Josephson, W.S.

    1995-10-16

    This study evaluated a variety of treatment and disposal technologies for mixed waste (MW) meeting the following criteria: 1. Single-Shell and Double-Shell Tank System (tank farms) equipment and other debris; 2. length greater than 12 feet; and contaminated with listed MW from the tank farms. This waste stream, commonly referred to as tank farms long-length contaminated equipment (LLCE), poses a unique and costly set of challenges during all phases of the waste management lifecycle.

  2. Long-length contaminated equipment disposal process path document

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, W.A.

    1998-09-30

    The first objective of the LLCE Process Path Document is to guide future users of this system on how to accomplish the cradle-to-grave process for the disposal of long-length equipment. Information will be provided describing the function and approach to each step in the process. Pertinent documentation, prerequisites, drawings, procedures, hardware, software, and key interfacing organizations will be identified. The second objective is related to the decision to lay up the program until funding is made available to complete it or until a need arises due to failure of an important component in a waste tank. To this end, the document will identify work remaining to be completed for each step of the process and open items or issues that remain to be resolved.

  3. Safety analysis report for packaging, onsite, long-length contaminated equipment transport system

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, W.A.

    1997-05-09

    This safety analysis report for packaging describes the components of the long-length contaminated equipment (LLCE) transport system (TS) and provides the analyses, evaluations, and associated operational controls necessary for the safe use of the LLCE TS on the Hanford Site. The LLCE TS will provide a standardized, comprehensive approach for the disposal of approximately 98% of LLCE scheduled to be removed from the 200 Area waste tanks.

  4. Long Length Contaminated Equipment Retrieval System Receiver Trailer and Transport Trailer Operations and Maintenance Manual

    Energy Technology Data Exchange (ETDEWEB)

    DALE, R.N.

    2000-05-01

    A system to accommodate the removal of long-length contaminated equipment (LLCE) from Hanford underground radioactive waste storage tanks was designed, procured, and demonstrated, via a project activity during the 1990s. The system is the Long Length Contaminated Equipment Removal System (LLCERS). LLCERS will be maintained and operated by Tank Farms Engineering and Operations organizations and other varied projects having a need for the system. The responsibility for the operation and maintenance of the LLCERS Receiver Trailer (RT) and Transport Trailer (TT) resides with the RPP Characterization Project Operations organization. The purpose of this document is to provide vendor supplied operating and maintenance (O & M) information for the RT and TT in a readily retrievable form. This information is provided this way instead of in a vendor information (VI) file to maintain configuration control of the operations baseline as described in RPP-6085, ''Configuration Management Plan for Long Length Contaminated Equipment Receiver and Transport Trailers''. Additional Operations Baseline documents are identified in RPP-6085.

  5. Limb-length discrepancy measured with computerized axial tomographic equipment

    Energy Technology Data Exchange (ETDEWEB)

    Huurman, W.W.; Jacobsen, F.S.; Anderson, J.C.; Chu, W.K.

    1987-06-01

    A simple, rapid, and accurate method for measuring limb-length discrepancies with computerized axial tomographic equipment is described. With this method less irradiation is delivered and some of the errors of computation are eliminated, compared with conventional methods. The costs of the technique are comparable with those of scanograms. The method is particularly applicable in the patient who has contracture of a joint.

  6. Bacteriological research for the contamination of equipment in chest radiography

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Seung Gu; Song, Woon Heung; Kweon, Dae Cheol [Shinhan University, Uijeongbu (Korea, Republic of)

    2015-12-15

    The purpose is to determine the degree of contamination of the equipment for infection control in chest radiography of the radiology department. We confirmed by chemical and bacterial identification of bacteria of the equipment and established a preventive maintenance plan. Chest X-ray radiography contact area on the instrument patients shoulder, hand, chin, chest lateral radiography patient contact areas with a 70% isopropyl alcohol cotton swab were compared to identify the bacteria before and after sterilization on the patient contact area in the chest radiography equipment of the department. The gram positive Staphylococcus was isolated from side shoots handle before disinfection in the chest radiography equipment. For the final identification of antibiotic tested that it was determined by performing the nobobiocin to the sensitive Staphylococcus epidermidis. Chest radiography equipment before disinfecting the handle side of Staphylococcus epidermidis bacteria were detected using a disinfectant should be to prevent hospital infections.

  7. Effect of contamination of pharmaceutical equipment on powder triboelectrification.

    Science.gov (United States)

    Eilbeck, J; Rowley, G; Carter, P A; Fletcher, E J

    2000-02-15

    Triboelectrification of pharmaceutical powders may cause problems during processing and manufacture due to adhesion/cohesion effects. The aim of this work was to investigate the role of adhered particles and moisture as contact surface contaminants on the electrostatic charging of size fractionated lactose, following contact with a surface, i.e. stainless steel, typically used in pharmaceutical process and manufacturing operations. Replicated experimental runs without cleaning the contact surface showed a successive decrease in the net electronegative charge due to adhered lactose particles. Removal of these contaminating particles by different cleaning methods had a considerable effect on the charge after triboelectrification. The charge on the lactose samples was found to decrease when humidity in the cyclone apparatus was increased from 2 to 100% relative humidity. These results clearly demonstrate that moisture, particulate contamination and method of cleaning of processing equipment during pharmaceutical manufacturing operations may influence the electrostatic behaviour of powders.

  8. Latin American and Caribbean intercomparison of surface contamination monitoring equipment.

    Science.gov (United States)

    Cabral, T S; Ramos, M M O; Laranjeira, A S; Santos, D S; Suarez, R C

    2011-03-01

    In October 2009, the International Atomic Energy Agency (IAEA) sponsored an intercomparison exercise of surface contamination monitoring equipment, which was held at the Laboratório Nacional de Metrologia das Radiações Ionizantes, from the Instituto de Radioproteção e Dosimetria, IRD/CNEN, Rio de Janeiro. This intercomparison was performed to evaluate the calibration accessibility in Latin America and the Caribbean. Thirteen countries within the region and IAEA have sent instruments to be compared, but only five countries and IAEA were considered apt to participate. Analysis of instruments, results and discussions are presented and recommendations are drawn.

  9. GLOVEBOX DISMANTLEMENT AND EQUIPMENT PROTECTION IN CONTAMINATED ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Kitamura, Akihiro; Stallings, Ellen; Wilburn, Dianne W.

    2003-02-27

    It has been revealed from the experiences of Decontamination and Decommissioning (D&D) activities that even a small improvement in performance can result in significant risk reduction and cost savings. For example, Race Scan Ear Mic System, which was originally developed for communications between racecar drivers and crews in loud environments, has been successfully applied to D&D work and proved to enhance worker safety and communications. Glovebox dismantlement is an important and costly process in D&D activities of nuclear facilities. Adequate decontamination and size reduction of the gloveboxes are especially important in this activity because they have the potential to reduce risks and costs significantly. This paper presents some simple approaches to support D&D tasks and discusses their potential advantages. Examples discussed include: Repeated shear wiping of large pipes and ducts; Application of thin layers on radiological counters for uninterrupted use; and Partial use of robotics for glovebox dismantling. The paper also discusses schematics for protecting equipment interiors and/or glovebox inner surfaces from contamination, which may result in significant savings and waste minimization upon future dismantlement. Examples discussed include: Smart coating for contamination prevention; and Protecting equipment by geometrically simple cover.

  10. Sodium cleaning from sodium contaminated components and operation for experimental equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, B. H.; Kim, J. M.; Kim, T. J.; Nam, H. Y.; Jeong, J. Y.; Choi, B. H.; Choi, J. H

    2007-11-15

    An objective of washing technology development for sodium contaminated equipment is to clean and reuse safely and effectively the used equipment through a washing and maintenance, and recovery of the sodium wastes generated during washing.

  11. Analysis of bacterial contamination on surface of general radiography equipment and CT equipment in emergency room of radiology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Dong Hee; KIm, Hyeong Gyun [Dept. of Radiological Science, Far East University, Eumseong (Korea, Republic of)

    2016-09-15

    We aim to offer basic materials about infection management through conducting bacterial contamination test about general radiography equipment and CT equipment installed in ER of three general hospitals with 100 sickbeds or more located in Gyeongsangbuk-do Province, and suggest management plan. It had been conducted from 1st December 2015 to 31st December, and objects were general radiography equipment and CT equipment of emergency room located in Gyeongsangbuk-do Province. For general radiography equipment, sources were collected from 4 places such as upper side of control box which employees use most, upper side of exposure button, whole upper side of table which is touching part of patient's skin, upper side of stand bucky's grid, and where patients put their jaws on. For CT equipment, sources were collected from 3 places such as upper side of control box which radiography room employees use most, X-ray exposure button, whole upper side of table which is touching part of patient's skin, and gantry inner. Surface contamination strain found at general radiography equipment in emergency room of radiology are Providencia stuartii(25%), Stenotrophomonas maltophilia(18%), Enterobacter cloacae(8%), Pseudomonas species(8%), Staphylococcus epidermidis(8%), Gram negative bacilli(8%), and ungrown bacteria at incubator after 48 hours of incubation (67%) which is the biggest. Most bacteria were found at upper side of stand bucky-grid and stand bucky of radiology's general radiography equipment, and most sources of CT equipment were focused at patient table, which means it is contaminated by patients who have various diseases, and patients who have strains with decreased immunity may get severe diseases. Thus infection prevention should be made through 70% alcohol disinfection at both before test and after test.

  12. High-resolution electron beam length measuring equipment; Kobunkaino denshisen sokucho sochi

    Energy Technology Data Exchange (ETDEWEB)

    Otaka, T.; Sasada, K.; Ezumi, M.; Maeda, T. [Hitachi, Ltd., Tokyo (Japan)

    1997-10-01

    Regarding the manufacture of semiconductor devices, the 16-megabit DRAM mass production system has been established, 64-megabit DRAM mass production has begun, and research and assessment are under way for the mass production of 256-megabit to 1-gigabit DRAMs. For the handling of devices so advanced in their microstructural feature and integration, sophisticated evaluation technologies are indispensable for the high-resolution observation of product geometry and for the high-precision management of product dimensions. Hitachi, Ltd., aiming to satisfy such needs, has introduced commercially its S-8820 series electron beam length measuring equipment based on the scanning electron microscope technology. This time, the corporation has developed S-8840 electron beam length measuring equipment, which can deal with the next-generation manufacturing processes. This equipment incorporates into itself an innovative signal detecting function for observing the bottom of, for example, a contact hole whose aspect ratio is quite high. The S-8840 type, furthermore, can process wafers at a rate approximately 50% higher than the conventional equipment for enhanced cost/performance. 3 refs., 8 figs., 1 tab.

  13. 40 CFR 267.116 - What must I do with contaminated equipment, structure, and soils?

    Science.gov (United States)

    2010-07-01

    ... equipment, structure, and soils? 267.116 Section 267.116 Protection of Environment ENVIRONMENTAL PROTECTION..., structure, and soils? You must properly dispose of or decontaminate all contaminated equipment, structures, and soils during the partial and final closure periods. By removing any hazardous wastes or...

  14. Bacterial contamination of inanimate surfaces and equipment in the intensive care unit.

    Science.gov (United States)

    Russotto, Vincenzo; Cortegiani, Andrea; Raineri, Santi Maurizio; Giarratano, Antonino

    2015-01-01

    Intensive care unit (ICU)-acquired infections are a challenging health problem worldwide, especially when caused by multidrug-resistant (MDR) pathogens. In ICUs, inanimate surfaces and equipment (e.g., bedrails, stethoscopes, medical charts, ultrasound machine) may be contaminated by bacteria, including MDR isolates. Cross-transmission of microorganisms from inanimate surfaces may have a significant role for ICU-acquired colonization and infections. Contamination may result from healthcare workers' hands or by direct patient shedding of bacteria which are able to survive up to several months on dry surfaces. A higher environmental contamination has been reported around infected patients than around patients who are only colonized and, in this last group, a correlation has been observed between frequency of environmental contamination and culture-positive body sites. Healthcare workers not only contaminate their hands after direct patient contact but also after touching inanimate surfaces and equipment in the patient zone (the patient and his/her immediate surroundings). Inadequate hand hygiene before and after entering a patient zone may result in cross-transmission of pathogens and patient colonization or infection. A number of equipment items and commonly used objects in ICU carry bacteria which, in most cases, show the same antibiotic susceptibility profiles of those isolated from patients. The aim of this review is to provide an updated evidence about contamination of inanimate surfaces and equipment in ICU in light of the concept of patient zone and the possible implications for bacterial pathogen cross-transmission to critically ill patients.

  15. Bacterial contamination of inanimate surfaces and equipment in the intensive care unit

    OpenAIRE

    Russotto, V; Cortegiani, A; Raineri, S.; Giarratano, A

    2015-01-01

    Intensive care unit (ICU)-acquired infections are a challenging health problem worldwide, especially when caused by multidrug-resistant (MDR) pathogens. In ICUs, inanimate surfaces and equipment (e.g., bedrails, stethoscopes, medical charts, ultrasound machine) may be contaminated by bacteria, including MDR isolates. Cross-transmission of microorganisms from inanimate surfaces may have a significant role for ICU-acquired colonization and infections. Contamination may result from healthcare wo...

  16. Cleaning and sanitation of Salmonella-contaminated peanut butter processing equipment.

    Science.gov (United States)

    Grasso, Elizabeth M; Grove, Stephen F; Halik, Lindsay A; Arritt, Fletcher; Keller, Susanne E

    2015-04-01

    Microbial contamination of peanut butter by Salmonella poses a significant health risk as Salmonella may remain viable throughout the product shelf life. Effective cleaning and sanitation of processing lines are essential for preventing cross-contamination. The objective of this study was to evaluate the efficacy of a cleaning and sanitation procedure involving hot oil and 60% isopropanol, ± quaternary ammonium compounds, to decontaminate pilot-scale processing equipment harboring Salmonella. Peanut butter inoculated with a cocktail of four Salmonella serovars (∼ 7 log CFU/g) was used to contaminate the equipment (∼ 75 L). The system was then emptied of peanut butter and treated with hot oil (90 °C) for 2 h followed by sanitizer for 1 h. Microbial analysis of food-contact surfaces (7 locations), peanut butter, and oil were conducted. Oil contained ∼ 3.2 log CFU/mL on both trypticase soy agar with yeast extract (TSAYE) and xylose lysine deoxycholate (XLD), indicating hot oil alone was not sufficient to inactivate Salmonella. Environmental sampling found 0.25-1.12 log CFU/cm(2) remaining on processing equipment. After the isopropanol sanitation (± quaternary ammonium compounds), no Salmonella was detected in environmental samples on XLD (<0.16 log CFU/cm(2)). These data suggest that a two-step hot oil clean and isopropanol sanitization treatment may eliminate pathogenic Salmonella from contaminated equipment.

  17. Evaluation of the secondary radiation impact on personnel during the dismantling of contaminated nuclear equipment

    Directory of Open Access Journals (Sweden)

    Stankunas Gediminas

    2013-01-01

    Full Text Available The article contains a numerical analysis of the secondary radiation contribution to the total radiation affecting the operational personnel during the dismantling activities of the contaminated equipment at a nuclear power plant. This study considers a widely applicable Monte Carlo particle transport code MCNPX and real Ignalina nuclear power plant records. A simplified albedo method is investigated in order to analyze the selected geometrical design cases. Additionally, the impact of the secondary radiation on the personnel dose was analyzed. The numerical MCNPX simulation allowed ascertaining the optimal distance between the source and the wall for the working personnel in closed rooms with contaminated equipment. The developed dose rate maps of the secondary radiation showed cross-sectional distribution of the dose rate inside the enclosed area.

  18. Ebola virus disease: The use of fluorescents as markers of contamination for personal protective equipment

    Directory of Open Access Journals (Sweden)

    Todd Bell

    2015-01-01

    Full Text Available The recent Ebola virus disease (EVD outbreak has created interest in personal protective equipment (PPE content and usage. PPE testing has historically been done by individual component, rather than as a bundle for contact isolation. Fluorescent agents are commonly used in training for infection control techniques. The purpose of our study was to compare 2 PPE bundles and to evaluate the feasibility of fluorescent markers as an assessment tool for PPE effectiveness. Eight healthcare providers volunteered for this preliminary study. Participants were randomized to 1 of 2 PPE bundles that meet current (October 20, 2014 CDC recommendations. One PPE bundle utilized commercial EVD-recommended components. The other PPE bundle used components already available at local hospitals or retail stores. Participants were also randomized to standard or high volume exposures (HVE to simulate fluid splash. Each participant was assisted in PPE donning and doffing by an experienced trainer. A training mannequin was contaminated with fluorescent agents to simulate bodily fluids. Participants were then given clinical tasks to care for the EVD “patient.” De-gowned participants were examined under “black light” for fluorescence indicative of contamination. One participant in each PPE arm had evidence of contamination. One of the contamination events was suspected during the patient care exercise. The other contamination event was not suspected until black light examination. In spite of a large difference in cost of PPE, the two bundle arms performed similarly. Bundle testing using fluorescent markers could help identify optimal PPE systems.

  19. Epidemiology of Pseudomonas aeruginosa in cystic fibrosis and the possible role of contamination by dental equipment

    DEFF Research Database (Denmark)

    Jensen, E T; Giwercman, B; Ojeniyi, B;

    1997-01-01

    Cystic fibrosis (CF) patients often suffer from Pseudomonas aeruginosa lung infection yet the source of this organism is not known. In order to determine whether CF patients might be contaminated with P. aeruginosa from dental equipment, a total of 103 water samples from 25 dental sessions...... in Frederiksberg Municipal Oral Health Care Service were examined. Three samples (2.9%) were positive for P. aeruginosa. Three hundred and twenty-seven water samples from 82 dental sessions from various other Municipal Oral Health Services in Denmark, attended by CF patients, were also examined. Eighteen of 327...... samples (5.5%) from nine sessions (11%) were positive for P. aeruginosa. In one case, genotypically identical (RFLP, pulsed-field gel electrophoresis) P. aeruginosa strains were found both in water from the dental equipment and in the CF patients sputum. This indicates a small risk for acquiring P...

  20. Assessment of Self-Contamination During Removal of Personal Protective Equipment for Ebola Patient Care.

    Science.gov (United States)

    Casanova, Lisa M; Teal, Lisa J; Sickbert-Bennett, Emily E; Anderson, Deverick J; Sexton, Daniel J; Rutala, William A; Weber, David J

    2016-10-01

    OBJECTIVE Ebola virus disease (EVD) places healthcare personnel (HCP) at high risk for infection during patient care, and personal protective equipment (PPE) is critical. Protocols for EVD PPE doffing have not been validated for prevention of viral self-contamination. Using surrogate viruses (non-enveloped MS2 and enveloped Φ6), we assessed self-contamination of skin and clothes when trained HCP doffed EVD PPE using a standardized protocol. METHODS A total of 15 HCP donned EVD PPE for this study. Virus was applied to PPE, and a trained monitor guided them through the doffing protocol. Of the 15 participants, 10 used alcohol-based hand rub (ABHR) for glove and hand hygiene and 5 used hypochlorite for glove hygiene and ABHR for hand hygiene. Inner gloves, hands, face, and scrubs were sampled after doffing. RESULTS After doffing, MS2 virus was detected on the inner glove worn on the dominant hand for 8 of 15 participants, on the non-dominant inner glove for 6 of 15 participants, and on scrubs for 2 of 15 participants. All MS2 on inner gloves was observed when ABHR was used for glove hygiene; none was observed when hypochlorite was used. When using hypochlorite for glove hygiene, 1 participant had MS2 on hands, and 1 had MS2 on scrubs. CONCLUSIONS A structured doffing protocol using a trained monitor and ABHR protects against enveloped virus self-contamination. Non-enveloped virus (MS2) contamination was detected on inner gloves, possibly due to higher resistance to ABHR. Doffing protocols protective against all viruses need to incorporate highly effective glove and hand hygiene agents. Infect Control Hosp Epidemiol 2016;1-6.

  1. Effect of negative air ions on the potential for bacterial contamination of plastic medical equipment

    Directory of Open Access Journals (Sweden)

    Kerr Kevin G

    2010-04-01

    acrylonitrile, did however develop a positive charge in the presence of the ionizer. Conclusion The findings of the study suggest that the action of negative air ionizers significantly alters the electrostatic landscape of the clinical environment, and that this has the potential to cause any Acinetobacter-bearing particles in the air to be strongly repelled from some plastic surfaces and attracted to others. In so doing, this may prevent critical items of equipment from becoming contaminated with the bacterium.

  2. Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures.

    Science.gov (United States)

    Fent, Kenneth W; Alexander, Barbara; Roberts, Jennifer; Robertson, Shirley; Toennis, Christine; Sammons, Deborah; Bertke, Stephen; Kerber, Steve; Smith, Denise; Horn, Gavin

    2017-06-21

    Firefighters' skin may be exposed to chemicals via permeation/penetration of combustion byproducts through or around personal protective equipment (PPE) or from the cross-transfer of contaminants on PPE to the skin. Additionally, volatile contaminants can evaporate from PPE following a response and be inhaled by firefighters. Using polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) as respective markers for non-volatile and volatile substances, we investigated the contamination of firefighters' turnout gear and skin following controlled residential fire responses. Participants were grouped into three crews of twelve firefighters. Each crew was deployed to a fire scenario (one per day, four total) and then paired up to complete six fireground job assignments. Wipe sampling of the exterior of the turnout gear was conducted pre- and post-fire. Wipe samples were also collected from a subset of the gear after field decontamination. VOCs off-gassing from gear were also measured pre-fire, post-fire, and post-decon. Wipe sampling of the firefighters' hands and neck was conducted pre- and post-fire. Additional wipes were collected after cleaning neck skin. PAH levels on turnout gear increased after each response and were greatest for gear worn by firefighters assigned to fire attack and to search and rescue activities. Field decontamination using dish soap, water, and scrubbing was able to reduce PAH contamination on turnout jackets by a median of 85%. Off-gassing VOC levels increased post-fire and then decreased 17-36 minutes later regardless of whether field decontamination was performed. Median post-fire PAH levels on the neck were near or below the limit of detection (< 24 micrograms per square meter [µg/m(2)]) for all positions. For firefighters assigned to attack, search, and outside ventilation, the 75(th) percentile values on the neck were 152, 71.7, and 39.3 µg/m(2), respectively. Firefighters assigned to attack and search had higher

  3. Transmission of hazardous diseases via nanobacterial contamination of medical and dental equipment

    Directory of Open Access Journals (Sweden)

    Jafar Kolahi

    2013-01-01

    Full Text Available Introduction: Nanobacteria (calcifying nanoparticles, nanobes are one of the most controversial issues in contemporary biology. Studies show accumulating evidence on association of nanobacteria with pathologic calcifications such as kidney stone, arterial plaque, calcification of coronary arteries, and cardiac valves calculus. The Hypothesis: Nanobacteria can tolerate harsh conditions extremely well. The apatite mineral layer around the organism and slow metabolism is likely to be the reason for the resistance of nanobacteria. They showed a wide resistance to the several disinfecting and sterilizating chemicals as well as autoclaving, ultraviolet light, microwaves, heating and drying treatments. Hence, it seems logic to postulate that hazardous diseases can be easily transmitted via nanobacterial contamination of medical and dental equipment. Evaluation of the Hypothesis: It is not enough to claim an agent not living according to the standard view on living creatures, as irrelevant to biological safety of cell cultures, or to human and animal health. Although the nature of prions is still under debate and prions are classified as nonliving, they exist and cause diseases, and thus form a serious risk for animal and human health. The risk was recognized only after enormous economical losses. It appears that nanobacteria situation is rather similar, except the fact that nanobacteria appear to cause or contribute to common hazardous diseases of the mankind. Hence, world-widely well-known organizations such as the Centers for Disease Control and Prevention, the Occupational Safety and Health Administration, and the World Health Organization should pay more attention to transmission of hazardous diseases via nanobacterial contamination of medical and dental equipment.

  4. CONTAMINATED PROCESS EQUIPMENT REMOVAL FOR THE D&D OF THE 232-Z CONTAMINATED WASTE RECOVERY PROCESS FACILITY AT THE PLUTONIUM FINISHING PLANT (PFP)

    Energy Technology Data Exchange (ETDEWEB)

    HOPKINS, A.M.; MINETTE, M.J.; KLOS, D.B.

    2007-01-25

    This paper describes the unique challenges encountered and subsequent resolutions to accomplish the deactivation and decontamination of a plutonium ash contaminated building. The 232-Z Contaminated Waste Recovery Process Facility at the Plutonium Finishing Plant was used to recover plutonium from process wastes such as rags, gloves, containers and other items by incinerating the items and dissolving the resulting ash. The incineration process resulted in a light-weight plutonium ash residue that was highly mobile in air. This light-weight ash coated the incinerator's process equipment, which included gloveboxes, blowers, filters, furnaces, ducts, and filter boxes. Significant airborne contamination (over 1 million derived air concentration hours [DAC]) was found in the scrubber cell of the facility. Over 1300 grams of plutonium held up in the process equipment and attached to the walls had to be removed, packaged and disposed. This ash had to be removed before demolition of the building could take place.

  5. Cross-contamination between processing equipment and deli meats by Listeria monocytogenes.

    Science.gov (United States)

    Lin, Chia-Min; Takeuchi, Kazue; Zhang, Lei; Dohm, Cynthia B; Meyer, Joseph D; Hall, Paul A; Doyle, Michael P

    2006-01-01

    Contamination of luncheon meats by Listeria monocytogenes has resulted in outbreaks of listeriosis and major product recalls. Listeriae can survive on processing equipment such as meat slicers which serve as a potential contamination source. This study was conducted to determine (i) the dynamics of cross-contamination of L. monocytogenes from a commercial slicer and associated equipment onto sliced meat products, (ii) the influence of sample size on the efficacy of the BAX-PCR and U.S. Department of Agriculture-Food Safety and Inspection Service enrichment culture assays to detect L. monocytogenes on deli meat, and (iii) the fate of L. monocytogenes on sliced deli meats of different types during refrigerated storage. Three types of deli meats, uncured oven-roasted turkey, salami, and bologna containing sodium diacetate and potassium lactate, were tested. A five-strain mixture of L. monocytogenes was inoculated at ca.10(3) CFU onto the blade of a commercial slicer. Five consecutive meat slices were packed per package, then vacuum sealed, stored at 4 degrees C, and sampled at 1 and 30 days postslicing. Two sample sizes, 25 g and contents of the entire package of meat, were assayed. Total numbers of L. monocytogenes-positive samples, including the two sample sizes and two sampling times, were 80, 9, and 3 for turkey, salami, and bologna, respectively. A higher percentage of turkey meat samples were L. monocytogenes positive when contents of the entire package were assayed than when the 25-g sample was assayed (12.5 and 7.5%, respectively). Lower inoculum populations of ca. 10(1) or 10(2) CFU of L. monocytogenes on the slicer blade were used for an additional evaluation of oven-roasted turkey using two additional sampling times of 60 and 90 days postslicing. L. monocytogenes-positive samples were not detected until 60 days postslicing, and more positive samples were detected at 90 days than at 60 days postslicing. When BAX-PCR and enrichment culture assays were

  6. Removal of Contaminants from Equipment and Debris and Waste Minimization Using the TECHXTRACT(TM) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jorg Schwitzgebel; Klaus Schwitzgebel; Michael W. Bonem; Ronald E. Borah

    1998-12-09

    From September, 1996 through July, 1997, EET, Inc. conducted a series of experiments under a U.S. Department of Energy (DOE) Program Research and Development Agreement (PRDA). This project, entitled "Removal of Contaminants from Equipment and Debris and Waste Minimization Using the TECHXTRACT â Technology" was conducted under DOE Contract DE-AC21- 96MC33138, administered by the Federal Energy Technology Center. The contract is divided into two phases - a base phase during which bench scale testing was conducted; and an optional phase for a field demonstration of a full-scale system. This report documents the results from the base phase of the contract. The base phase included the following major elements: - Evaluation of the effectiveness of various decontamination options, using both surrogate and radioactively contaminated samples. - Evaluation of various methods for the treatment of the secondary waste streams from the preferred decontamination system(s). - Evaluation of decontamination effectiveness for concrete rubble. - Preliminary engineering design and cost estimation for a full-scale system. - Preliminary economic analysis of the proposed system versus other currently available options for disposition of the materials. Results from the base phase, which are described in the following report, are very positive. Testing has shown that free release requirements and extremely high decontamination factors can be achieved for a variety of materials and radionuclides. Results for concrete rubble decontamination were less conclusive. The bench scale testing has led to the design of two different systems, both based on the TECHXTRACT â chemistry, for potential full-scale demonstration. Based on the preliminary economic analysis, this system compares favorably with currently available commercial options, including disposal.

  7. Identification of Pork Contamination in Meatballs of Indonesia Local Market Using Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) Analysis.

    Science.gov (United States)

    Erwanto, Yuny; Abidin, Mohammad Zainal; Sugiyono, Eko Yasin Prasetyo Muslim; Rohman, Abdul

    2014-10-01

    This research applied and evaluated a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) using cytochrome b gene to detect pork contamination in meatballs from local markets in Surabaya and Yogyakarta regions, Indonesia. To confirm the effectiveness and specificity of this fragment, thirty nine DNA samples from different meatball shops were isolated and amplified, and then the PCR amplicon was digested by BseDI restriction enzyme to detect the presence of pork in meatballs. BseDI restriction enzyme was able to cleave porcine cytochrome b gene into two fragments (131 bp and 228 bp). Testing the meatballs from the local market showed that nine of twenty meatball shops in Yogyakarta region were detected to have pork contamination, but there was no pork contamination in meatball shops in Surabaya region. In conclusion, specific PCR amplification of cytochrome b gen and cleaved by BseDI restriction enzymes seems to be a powerful technique for the identification of pork presence in meatball because of its simplicity, specificity and sensitivity. Furthermore, pork contamination intended for commercial products of sausage, nugget, steak and meat burger can be checked. The procedure is also much cheaper than other methods based on PCR, immunodiffusion and other techniques that need expensive equipment.

  8. Identification of Pork Contamination in Meatballs of Indonesia Local Market Using Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) Analysis

    Science.gov (United States)

    Erwanto, Yuny; Abidin, Mohammad Zainal; Sugiyono, Eko Yasin Prasetyo Muslim; Rohman, Abdul

    2014-01-01

    This research applied and evaluated a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) using cytochrome b gene to detect pork contamination in meatballs from local markets in Surabaya and Yogyakarta regions, Indonesia. To confirm the effectiveness and specificity of this fragment, thirty nine DNA samples from different meatball shops were isolated and amplified, and then the PCR amplicon was digested by BseDI restriction enzyme to detect the presence of pork in meatballs. BseDI restriction enzyme was able to cleave porcine cytochrome b gene into two fragments (131 bp and 228 bp). Testing the meatballs from the local market showed that nine of twenty meatball shops in Yogyakarta region were detected to have pork contamination, but there was no pork contamination in meatball shops in Surabaya region. In conclusion, specific PCR amplification of cytochrome b gen and cleaved by BseDI restriction enzymes seems to be a powerful technique for the identification of pork presence in meatball because of its simplicity, specificity and sensitivity. Furthermore, pork contamination intended for commercial products of sausage, nugget, steak and meat burger can be checked. The procedure is also much cheaper than other methods based on PCR, immunodiffusion and other techniques that need expensive equipment. PMID:25178301

  9. Controlling Beryllium Contaminated Material And Equipment For The Building 9201-5 Legacy Material Disposition Project

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, T. D.; Easterling, S. D.

    2010-10-01

    This position paper addresses the management of beryllium contamination on legacy waste. The goal of the beryllium management program is to protect human health and the environment by preventing the release of beryllium through controlling surface contamination. Studies have shown by controlling beryllium surface contamination, potential airborne contamination is reduced or eliminated. Although there are areas in Building 9201-5 that are contaminated with radioactive materials and mercury, only beryllium contamination is addressed in this management plan. The overall goal of this initiative is the compliant packaging and disposal of beryllium waste from the 9201-5 Legacy Material Removal (LMR) Project to ensure that beryllium surface contamination and any potential airborne release of beryllium is controlled to levels as low as practicable in accordance with 10 CFR 850.25.

  10. Analysis of Bacterial Contamination in Anesthetic Equipments in Operation Room of Vali-E-Asr Hospital of Fasa; Efficiency of Disinfection Methods

    Directory of Open Access Journals (Sweden)

    Abbas Abdollahi

    2011-09-01

    Full Text Available Background & Objectives: Anesthetic equipments could be one of the factors transmitting infection in a surgical operation. We could be prevent infection transmission to a great extend, by providing efficient methods of disinfection of anesthetic equipments. The purpose of the present research is to analyze the bacterial contamination in anesthetic equipment in operation rooms of Vali-e-Asr hospital in Fasa city, Fars province, and evaluate the efficiency of the applied disinfection methods. Materials & Methods: In this cross-sectional & analytical study, sampling from anesthetic equipment was done by sterile swap and culture on nutrient media, irregularly and randomly, before and after using and washing tools. Used anesthetic equipment in such operation rooms have been washed with Betadine 7.5% by experts and technicians of anesthetic section and were prepared for the next operation. Results: Total contamination was 2.3% in 210 samples taken. 5 culture items indicated the existence of bacterial contamination, among which 2 contamination cases were observed in nasal airway (coagulase negative Staphylococcus, non pathogen Neisseria, 2 contamination cases in red rubber endotracheal tube (nonpathogen Neisseria and Klebsiella pneumonia and 1 contamination case in oxygen mask (Escherichia coli. Conclusion: The very low level of contamination (20-85% contamination in anesthetic equipments in our research is probably due to application of a appropriate disinfection method used by educated personnel in operation rooms. This could have a significant role in decreasing the infection rate in one hand and decreasing expenses and time on the other hand.

  11. Resrad-recycle: a computer model for analyzing radiation exposures resulting from recycling radioactively contaminated scrap metals or reusing radioactively surface-contaminated materials and equipment.

    Science.gov (United States)

    Cheng, Jing-Jy; Kassas, Bassel; Yu, Charley; Amish, John; LePoire, Dave; Chen, Shih-Yew; Williams, W A; Wallo, A; Peterson, H

    2004-11-01

    RESRAD-RECYCLE is a computer code designed by Argonne National Laboratory (ANL) to be used in making decisions about the disposition of radioactively contaminated materials and scrap metals. It implements a pathway analysis methodology to evaluate potential radiation exposures resulting from the recycling of contaminated scrap metals and the reuse of surface-contaminated materials and equipment. For modeling purposes, it divides the entire metal recycling process into six steps: (1) scrap delivery, (2) scrap melting, (3) ingot delivery, (4) product fabrication, (5) product distribution, and (6) use of finished product. RESRAD-RECYCLE considers the reuse of surface-contaminated materials in their original forms. It contains representative exposure scenarios for each recycling step and the reuse process; users can also specify scenarios if desired. The model calculates individual and collective population doses for workers involved in the recycling process and for the public using the finished products. The results are then used to derive clearance levels for the contaminated materials on the basis of input dose restrictions. The model accounts for radiological decay and ingrowth, dilution and partitioning during melting, and distribution of refined metal in the various finished products, as well as the varying densities and geometries of the radiation sources during the recycling process. A complete material balance in terms of mass and radioactivity during the recycling process can also be implemented. In an international validation study, the radiation doses calculated by RESRAD-RECYCLE were shown to agree fairly well with actual measurement data.

  12. Removal of contaminants from equipment and debris and waste minimization using TechXtract{reg_sign} technology

    Energy Technology Data Exchange (ETDEWEB)

    Bonem, M.W. [EET, Inc., Bellaire, TX (United States)

    1997-10-01

    Under this Program Research and Development Agreement (PRDA), EET, Inc., is extending its proprietary TechXtract{reg_sign} chemical decontamination technology into an effective, economical, integrated contaminant removal system. This integrated system will consist of a series of decontamination baths using the TechXtract{reg_sign} chemical formulas, followed by a waste treatment process that will remove the contaminants from the spent chemicals. Sufficient decontamination will result so that materials can be released without restriction after they have been treated, even those materials that have traditionally been considered to be {open_quotes}undecontaminable.{close_quotes} The secondary liquid waste will then be treated to separate any hazardous and radioactive contaminants, so that the spent chemicals and wastewater can be discharged through conventional, permitted outlets. The TechXtract{reg_sign} technology is a unique process that chemically extracts hazardous contaminants from the surface and substrate of concrete, steel, and other solid materials. This technology has been used successfully to remove contaminants as varied as PCBs, radionuclides, heavy metals, and hazardous organics. The process` advantage over other alternatives is its effectiveness in safe and consistent extraction of subsurface contamination. TechXtract{reg_sign} is a proprietary process developed, owned, and provided by EET, Inc. The objective of the PRDA is to demonstrate on a full-scale basis an economical system for decontaminating equipment and debris, with further treatment of secondary waste streams to minimize waste volumes. Contaminants will be removed from the contaminated items to levels where they can be released for unrestricted use. The entire system will be designed with maximum flexibility and automation in mind.

  13. Effect of alkyl length of cationic surfactants on desorption of Cs from contaminated clay

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Hyun; Park, Chan Woo; Yang, Hee Man; Seo, Bum Kyoung; Lee, Kune Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, So Jin [Chungnam National University, Daejeon (Korea, Republic of)

    2017-03-15

    In this study, desorption characteristics of Cs from clay according to the hydrophobic alkyl chain length of the cationic surfactant were investigated. Alkyltrimethylammonium bromide was used as a cationic surfactant, and the length of the hydrophobic alkyl chain of the cationic surfactant was varied from –octyl to –cetyl. The adsorbed amount of the cationic surfactant on montmorillonite increased with the length of the hydrophobic alkyl chain, and intercalation of the cationic surfactant into the clay interlayer increased the interlayer distances. The Cs removal efficiency was also enhanced with increasing alkyl chain length, and the cationic surfactant with the cetyl group showed a maximum Cs removal efficiency of 99±2.9%.

  14. Listeria monocytogenes contamination of the environment and surfaces of the equipment in the meat processing facilities in republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Dean Jankuloski

    2007-11-01

    Full Text Available Listeria monocytogenes contamination of the environment and surfaces of the equipment was examined in seven meat processing facilities. Up to date prevalence of this foodborn pathogen in meat processing facilities facilities in Republic of Macedonia was unknown. Biofilms are composed from food spoilage microorganisms and food born pathogens. They are located on the surfaces of the equipment that come in contact with food and in facilities environment. Microorganisms in biofilm presenting micro eco system and are source of dissemination and contamination of food born pathogens in final meat products. During the preparation of this study we have covered a 7 meat processing facilities and we took a total of 39 swabs from surfaces that come in direct or indirect contact with food. Listeria monocytogenes was discovered in 10 (25,64% swabs (locations. Prevalence of other Listeria spp. compared with total number of taken samples was 15 (38,46% Listeria innocua, 3 (7,69% Listeria welshimeri and 1 (2,65% isolate Listeria seeligeri.

  15. Bacterial Contamination of CT Equipment: Use of ATP Detection and Culture Results to Target Quality Improvement.

    Science.gov (United States)

    Childress, John; Burch, Debborah; Kucharski, Cheryl; Young, Carol; Kazerooni, Ella A; Davenport, Matthew S

    2017-08-01

    This study aimed to evaluate the use of an adenosine triphosphate (ATP) monitoring system to minimize surface contamination on inpatient computed tomography (CT) scanners. The bore, table, and wrap of two quaternary care inpatient CT scanners (load/scanner: ~ 30-40 CT examinations/day) were assayed with bacterial cultures and an ATP detection system during six prospective iterative plan-do-check-act improvement cycles from January 6, 2016 to October 12, 2016. Per-cycle sampling was for eight consecutive weekdays. ATP detection was expressed as relative light units (RLUs) through a luciferase reaction, with >350 RLU considered contaminated per manufacturer recommendations. Culture swabs were placed into 6.5% NaCl broth, a Staphylococcus enrichment broth, and incubated aerobically at 37°C for 48 hours. Positive broths were plated to chromogenic Staphylococcus media. Culture rates (Fisher exact test) and RLU values (Mann-Whitney U test) were compared. In Cycle 1, both culture results and median RLU values indicated the wrap was the most contaminated item (positive culture rate: 63% [10/16], median RLU interquartile range: 173 [IQR: 56-640]); however, RLU values were not predictive of per-sample culture results (P = .36). Following iterative improvements, RLU values at Cycle 6 were significantly lower than at peak (P = .02-.04) and within manufacturer's recommendations: all samples: 45 (IQR: 16-87), bore: 26 (IQR: 0-51), table: 68 (IQR: 21-89), wrap: 47 (IQR: 38-121). The Velcro wrap is the most contaminated item on a CT scanner, and special processes may be needed to ensure adequate cleansing. ATP detection is a crude surrogate for bacterial culture results but benefits from speed, reduced cost, and greater statistical power. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  16. Occurrence of Arcobacter in Iranian poultry and slaughterhouse samples implicates contamination by processing equipment and procedures.

    Science.gov (United States)

    Khoshbakht, R; Tabatabaei, M; Shirzad Aski, H; Seifi, S

    2014-01-01

    1. The occurrence of Arcobacter spp. and three pathogenic species of Arcobacter from Iranian poultry carcasses was investigated at different steps of broiler processing to determine critical control points for reducing carcass contamination. 2. Samples were collected from (a) cloaca immediately before processing, (b) different points during processing and (c) at different stations in a processing plant of a slaughterhouse in southern Iran. 3. After enrichment steps in Arcobacter selective broth, DNA of the samples was extracted and three significant pathogen species of Arcobacter were identified based on polymerase chain reaction (PCR) detection of 16S rRNA and specific species PCR. 4. Out of a total of 540 samples, 244 (45%) were positive for Arcobacter spp. Arcobacter butzleri was more frequently detected (73% ± 13.9%) than A. cryaeophilus (9% ± 13.9%) and A. skirrowii (4.1%). In addition, co-colonisation (A. butzleri and A. cryaerophilus) occurred in 13.9% of the positive samples. 5. The results indicate a high prevalence of Arcobacter in the investigated slaughterhouse and broiler carcasses and that Arcobacter is not a normal flora of the broilers. Evidence for the presence of Arcobacter in the environment and water of processing plants suggests that these are sources of contamination of poultry carcasses. In addition, contamination of the poultry carcasses can spread between poultry meats in different parts and processes of the slaughterhouse (pre-scalding to after evisceration).

  17. Thermal dechlorination of heavily PCB-contaminated soils from a sealed site of PCB-containing electrical equipment.

    Science.gov (United States)

    Gao, Xingbao; Ji, Bingjing; Huang, Qifei

    2016-08-01

    A large amount of soils are contaminated by leakage of polychlorinated biphenyls (PCBs) from sealed-up PCB-containing electrical equipment in China. Thermal dechlorination of soils contaminated with PCBs at a level of 108 mg g(-1) and PCB77 (3,3',4,4'-tetrachlorobiphenyl) as a model isomer in conjunction with calcium oxide was investigated in this study. The PCB dechlorination rate improved with increased temperature and time. The highest dechlorination rate was 85.3 %, and temperature was the main influencing factor. Pentachlorobiphenyl and tetrachlorobiphenyl in soils decreased or disappeared in response to treatment at 350 and 400 °C for 4 h, while monochlorinated biphenyl and biphenyl were detected after the reaction, indicating the presence of a dechlorination/hydrogenation pathway. Discrepancy in chlorine balance was observed after low-temperature thermal dechlorination. The species of dechlorination products were identified as amorphous carbon containing a crystalline graphite plane structure and a carbonyl group-containing polymerized product, demonstrating the existence of a dechlorination/polymerization pathway. The yield of amorphous carbon and high-molecular-weight intermediates increased with heating time. The results showed that the discrepancy in chlorine balance was because of the generation of polymerized products and undetected intermediates.

  18. Disposal of tank farm long-length contaminated equipment: LLCE characterization software functional criteria and management plan

    Energy Technology Data Exchange (ETDEWEB)

    Roach, H.L., Westinghouse Hanford

    1996-05-15

    This plan outlines the functional criteria requirements and the management plan required to develop computer software to calculate the radionuclide and chemical content of the LLCE waste packages. The software will use the calculated radionuclide and chemical content to prepare waste characterization support data in support of LLCE waste characterization and shipment.

  19. Plasma-based determination of inorganic contaminants in waste of electric and electronic equipment after microwave-induced combustion

    Science.gov (United States)

    Mello, Paola A.; Diehl, Lisarb O.; Oliveira, Jussiane S. S.; Muller, Edson I.; Mesko, Marcia F.; Flores, Erico M. M.

    2015-03-01

    A systematic study was performed for the determination of inorganic contaminants in polymeric waste from electrical and electronic equipment (EEE) for achieving an efficient digestion to minimize interferences in determination using plasma-based techniques. The determination of As, Br, Cd, Co, Cr, Cu, Ni, Pb, Sb, and Zn by inductively coupled plasma mass spectrometry (ICP-MS) and also by inductively coupled plasma optical emission spectrometry (ICP OES) was carried out after digestion using microwave-induced combustion (MIC). Arsenic and Hg were determined by flow-injection chemical vapor generation inductively coupled plasma mass spectrometry (FI-CVG-ICP-MS). Dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP-MS) with ammonia was also used for Cr determination. The suitability of MIC for digestion of sample masses up to 400 mg was demonstrated using microcrystalline cellulose as aid for combustion of polymers from waste of EEEs that usually contain flame retardants that impair the combustion. The composition and concentration of acid solutions (HNO3 or HNO3 plus HCl) were evaluated for metals and metalloids and NH4OH solutions were investigated for Br absorption. Accuracy was evaluated by comparison of results with those obtained using high pressure microwave-assisted wet digestion (HP-MAWD) and also by the analysis of certified reference material (CRM) of polymer (EC680k-low-density polyethylene). Bromine determination was only feasible using digestion by MIC once losses were observed when HP-MAWD was used. Lower limits of detection were obtained for all analytes using MIC (from 0.005 μg g- 1 for Co by ICP-MS up to 3.120 μg g-1 for Sb by ICP OES) in comparison to HP-MAWD due to the higher sample mass that can be digested (400 mg) and the use of diluted absorbing solutions. The combination of HNO3 and HCl for digestion showed to be crucial for quantitative recovery of some elements, as Cr and Sb. In addition, suitable agreement of Cr to

  20. Personal protective equipment for preventing highly infectious diseases due to exposure to contaminated body fluids in healthcare staff.

    Science.gov (United States)

    Verbeek, Jos H; Ijaz, Sharea; Mischke, Christina; Ruotsalainen, Jani H; Mäkelä, Erja; Neuvonen, Kaisa; Edmond, Michael B; Sauni, Riitta; Kilinc Balci, F Selcen; Mihalache, Raluca C

    2016-04-19

    In epidemics of highly infectious diseases, such as Ebola Virus Disease (EVD) or SARS, healthcare workers (HCW) are at much greater risk of infection than the general population, due to their contact with patients' contaminated body fluids. Contact precautions by means of personal protective equipment (PPE) can reduce the risk. It is unclear which type of PPE protects best, what is the best way to remove PPE, and how to make sure HCWs use PPE as instructed. To evaluate which type or component of full-body PPE and which method of donning or removing (doffing) PPE have the least risk of self-contamination or infection for HCWs, and which training methods most increase compliance with PPE protocols. We searched MEDLINE (PubMed up to 8 January 2016), Cochrane Central Register of Trials (CENTRAL up to 20 January 2016), EMBASE (embase.com up to 8 January 2016), CINAHL (EBSCOhost up to 20 January 2016), and OSH-Update up to 8 January 2016. We also screened reference lists of included trials and relevant reviews, and contacted NGOs and manufacturers of PPE. We included all eligible controlled studies that compared the effect of types or components of PPE in HCWs exposed to highly infectious diseases with serious consequences, such as EVD and SARS, on the risk of infection, contamination, or noncompliance with protocols. This included studies that simulated contamination with fluorescent markers or a non-pathogenic virus.We also included studies that compared the effect of various ways of donning or removing PPE, and the effects of various types of training in PPE use on the same outcomes. Two authors independently selected studies, extracted data and assessed risk of bias in included trials. We intended to perform meta-analyses but we did not find sufficiently similar studies to combine their results. We included nine studies with 1200 participants evaluating ten interventions. Of these, eight trials simulated the exposure with a fluorescent marker or virus or bacteria

  1. Plasma-based determination of inorganic contaminants in waste of electric and electronic equipment after microwave-induced combustion

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Paola A.; Diehl, Lisarb O.; Oliveira, Jussiane S.S.; Muller, Edson I. [Departamento de Química, Universidade Federal de Santa Maria, Av. Roraima, 1000, 97105-900, Santa Maria (Brazil); Mesko, Marcia F. [Centro de Ciências Químicas, Farmacêuticas e de Alimentos, Universidade Federal de Pelotas, Campus Capão do Leão, 96900-010 Pelotas, RS (Brazil); Flores, Erico M.M., E-mail: ericommf@gmail.com [Departamento de Química, Universidade Federal de Santa Maria, Av. Roraima, 1000, 97105-900, Santa Maria (Brazil)

    2015-03-01

    A systematic study was performed for the determination of inorganic contaminants in polymeric waste from electrical and electronic equipment (EEE) for achieving an efficient digestion to minimize interferences in determination using plasma-based techniques. The determination of As, Br, Cd, Co, Cr, Cu, Ni, Pb, Sb, and Zn by inductively coupled plasma mass spectrometry (ICP-MS) and also by inductively coupled plasma optical emission spectrometry (ICP OES) was carried out after digestion using microwave-induced combustion (MIC). Arsenic and Hg were determined by flow-injection chemical vapor generation inductively coupled plasma mass spectrometry (FI-CVG-ICP-MS). Dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP-MS) with ammonia was also used for Cr determination. The suitability of MIC for digestion of sample masses up to 400 mg was demonstrated using microcrystalline cellulose as aid for combustion of polymers from waste of EEEs that usually contain flame retardants that impair the combustion. The composition and concentration of acid solutions (HNO{sub 3} or HNO{sub 3} plus HCl) were evaluated for metals and metalloids and NH{sub 4}OH solutions were investigated for Br absorption. Accuracy was evaluated by comparison of results with those obtained using high pressure microwave-assisted wet digestion (HP-MAWD) and also by the analysis of certified reference material (CRM) of polymer (EC680k—low-density polyethylene). Bromine determination was only feasible using digestion by MIC once losses were observed when HP-MAWD was used. Lower limits of detection were obtained for all analytes using MIC (from 0.005 μg g{sup −1} for Co by ICP-MS up to 3.120 μg g{sup −1} for Sb by ICP OES) in comparison to HP-MAWD due to the higher sample mass that can be digested (400 mg) and the use of diluted absorbing solutions. The combination of HNO{sub 3} and HCl for digestion showed to be crucial for quantitative recovery of some elements, as Cr and Sb

  2. Heavy metal contamination characteristic of soil in WEEE (waste electrical and electronic equipment) dismantling community: a case study of Bangkok, Thailand.

    Science.gov (United States)

    Damrongsiri, Seelawut; Vassanadumrongdee, Sujitra; Tanwattana, Puntita

    2016-09-01

    Sue Yai Utit is an old community located in Bangkok, Thailand which dismantles waste electrical and electronic equipment (WEEE). The surface soil samples at the dismantling site were contaminated with copper (Cu), lead (Pb), zinc (Zn), and nickel (Ni) higher than Dutch Standards, especially around the WEEE dumps. Residual fractions of Cu, Pb, Zn, and Ni in coarse soil particles were greater than in finer soil. However, those metals bonded to Fe-Mn oxides were considerably greater in fine soil particles. The distribution of Zn in the mobile fraction and a higher concentration in finer soil particles indicated its readily leachable character. The concentration of Cu, Pb, and Ni in both fine and coarse soil particles was mostly not significantly different. The fractionation of heavy metals at this dismantling site was comparable to the background. The contamination characteristics differed from pollution by other sources, which generally demonstrated the magnification of the non-residual fraction. A distribution pathway was proposed whereby contamination began by the deposition of WEEE scrap directly onto the soil surface as a source of heavy metal. This then accumulated, corroded, and was released via natural processes, becoming redistributed among the soil material. Therefore, the concentrations of both the residual and non-residual fractions of heavy metals in WEEE-contaminated soil increased.

  3. An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE)

    Energy Technology Data Exchange (ETDEWEB)

    Stenvall, Erik, E-mail: erik.stenvall@chalmers.se [Department of Materials and Manufacturing Technology, Chalmers University of Technology, 41296 Göteborg (Sweden); Tostar, Sandra [Department of Industrial Materials Recycling, Chalmers University of Technology, 41296 Göteborg (Sweden); Boldizar, Antal [Department of Materials and Manufacturing Technology, Chalmers University of Technology, 41296 Göteborg (Sweden); Foreman, Mark R.StJ. [Department of Industrial Materials Recycling, Chalmers University of Technology, 41296 Göteborg (Sweden); Möller, Kenneth [Chemistry and Materials Technology, SP, 50115 Borås (Sweden)

    2013-04-15

    The compositions of three WEEE plastic batches of different origin were investigated using infrared spectroscopy, and the metal content was determined with inductively coupled plasma. The composition analysis of the plastics was based mainly on 14 samples collected from a real waste stream, and showed that the major constituents were high impact polystyrene (42 wt%), acrylonitrile–butadiene–styrene copolymer (38 wt%) and polypropylene (10 wt%). Their respective standard deviations were 21.4%, 16.5% and 60.7%, indicating a considerable variation even within a single batch. The level of metal particle contamination was found to be low in all samples, whereas wood contamination and rubber contamination were found to be about 1 wt% each in most samples. In the metal content analysis, iron was detected at levels up to 700 ppm in the recyclable waste plastics fraction, which is of concern due to its potential to catalyse redox reactions during melt processing and thus accelerate the degradation of plastics during recycling. Toxic metals were found only at very low concentrations, with the exception of lead and cadmium which could be detected at 200 ppm and 70 ppm levels, respectively, but these values are below the current threshold limits of 1000 ppm and 100 ppm set by the Restriction of Hazardous Substances directive.

  4. An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE).

    Science.gov (United States)

    Stenvall, Erik; Tostar, Sandra; Boldizar, Antal; Foreman, Mark R StJ; Möller, Kenneth

    2013-04-01

    The compositions of three WEEE plastic batches of different origin were investigated using infrared spectroscopy, and the metal content was determined with inductively coupled plasma. The composition analysis of the plastics was based mainly on 14 samples collected from a real waste stream, and showed that the major constituents were high impact polystyrene (42 wt%), acrylonitrile-butadiene-styrene copolymer (38 wt%) and polypropylene (10 wt%). Their respective standard deviations were 21.4%, 16.5% and 60.7%, indicating a considerable variation even within a single batch. The level of metal particle contamination was found to be low in all samples, whereas wood contamination and rubber contamination were found to be about 1 wt% each in most samples. In the metal content analysis, iron was detected at levels up to 700 ppm in the recyclable waste plastics fraction, which is of concern due to its potential to catalyse redox reactions during melt processing and thus accelerate the degradation of plastics during recycling. Toxic metals were found only at very low concentrations, with the exception of lead and cadmium which could be detected at 200 ppm and 70 ppm levels, respectively, but these values are below the current threshold limits of 1000 ppm and 100 ppm set by the Restriction of Hazardous Substances directive. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Experimental analysis of the environmental contamination of electrical equipment; Analisis experimental de la contaminacion ambiental en equipos electricos

    Energy Technology Data Exchange (ETDEWEB)

    Campillo Ruiz, Maria Teresa; Ponce Velez, Marco Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This paper is a summary of the main causes that originate the contamination problems in insulating materials. This as the result of different studies performed in experimental testing stations, as well as in transmission, distribution and laboratory power lines by the Departamento de Materiales of the Instituto de Investigaciones Electricas (IIE). [Espanol] En el presente trabajo se muestra un resumen de los principales factores que originan los problemas de contaminacion en aislamientos. Esto, como resultado de diversos estudios realizados tanto en estaciones de prueba experimentales como en lineas de transmision, distribucion y laboratorio por el Departamento de Materiales del Instituto de Investigaciones Electricas (IIE).

  6. 高压输变电设备污闪防范措施%The High-voltage Power Transmission Equipment Contamination Flashover Precautions

    Institute of Scientific and Technical Information of China (English)

    张红黎

    2012-01-01

    During the Spring Festival in 2011, the Jiaodong region experienced rare sea fog weather invasion, the occurrence of a large area of contamination flashover power outages in some areas. This paper introduced pollution flashover characteristics, and through the accident analysis, it proposed the antifouling flash measures for high-voltage power transmission equipment.%2011年春节期间,胶东地区遭遇少见的海雾天气侵袭,部分地区发生大面积的污闪停电事故。介绍了污闪特点,通过事故分析,提出高压输变电设备防污闪措施。

  7. Decontamination Strategy for Large Area and/or Equipment Contaminated with Chemical and Biological Agents using a High Energy Arc Lamp (HEAL)

    Energy Technology Data Exchange (ETDEWEB)

    Schoske, Richard [ORNL; Kennedy, Patrick [ORNL; Duty, Chad E [ORNL; Smith, Rob R [ORNL; Huxford, Theodore J [ORNL; Bonavita, Angelo M [ORNL; Engleman, Greg [ORNL; Vass, Arpad Alexander [ORNL; Griest, Wayne H [ORNL; Ilgner, Ralph H [ORNL; Brown, Gilbert M [ORNL

    2009-04-01

    A strategy for the decontamination of large areas and or equipment contaminated with Biological Warfare Agents (BWAs) and Chemical Warfare Agents (CWAs) was demonstrated using a High Energy Arc Lamp (HEAL) photolysis system. This strategy offers an alternative that is potentially quicker, less hazardous, generates far less waste, and is easier to deploy than those currently fielded by the Department of Defense (DoD). For example, for large frame aircraft the United States Air Force still relies on the combination of weathering (stand alone in environment), air washing (fly aircraft) and finally washing the aircraft with Hot Soapy Water (HSW) in an attempt to remove any remaining contamination. This method is laborious, time consuming (upwards of 12+ hours not including decontamination site preparation), and requires large amounts of water (e.g., 1,600+ gallons for a single large frame aircraft), and generates large amounts of hazardous waste requiring disposal. The efficacy of the HEAL system was demonstrated using diisopropyl methyl phosphonate (DIMP) a G series CWA simulant, and Bacillus globigii (BG) a simulant of Bacillus anthracis. Experiments were designed to simulate the energy flux of a field deployable lamp system that could stand-off 17 meters from a 12m2 target area and uniformly expose a surface at 1360 W/m2. The HEAL system in the absence of a catalyst reduced the amount of B. globigii by five orders of magnitude at a starting concentration of 1.63 x 107 spores. In the case of CWA simulants, the HEAL system in the presence of the catalyst TiO2 effectively degraded DIMP sprayed onto a 100mm diameter Petri dish in 5 minutes.

  8. Changes in the processing of heavy {alpha}-contaminated equipment at the Marcoule center; L'evolution du conditionnement des gros materiels contamines en {alpha} sur le centre de Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Seyfried, P. [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    The processing of heavy {alpha}-contaminated equipment at the Marcoule Centre has been carried out for a long time by a rather expensive 'manual' method. It has become necessary to reduce these costs by using more automated methods. Two studies which have been carried out have shown that when the amount of waste to be treated is large and is composed mainly of plastic material, it is possible to design economic installations using cooling and shock demolition, conventional compaction leading to rather poor results. For average quantities, a cutting-up reservoir, used also for other purposes, makes it possible to solve these processing problems at Marcoule. The costs involved are much lower than those previously required in the case of so-called 'manual' methods. (author) [French] Le conditionnement du gros materiel contamine en {alpha} a longtemps ete effectue sur le Centre de Marcoule par une methode 'manuelle' assez couteuse. Il est apparu necessaire de chercher a reduire les couts en utilisant des methodes plus automatisees. Deux etudes ont permis de montrer que lorsque les quantites a traiter sont grandes et interessent surtout des dechets plastiques, on pouvait concevoir economiquement des installations utilisant le refroidissement et choc, le compactage classique donnant des resultats assez decevants. Pour les quantites moyennes, une piscine de decoupage, utilisable d'ailleurs a d'autres fins, permet de resoudre, a Marcoule, le probleme du conditionnement. Les frais sont tres inferieurs a ceux anciennement engages avec les methodes 'manuelles'. (auteur)

  9. 10 CFR 835.1101 - Control of material and equipment.

    Science.gov (United States)

    2010-01-01

    ....1101 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radioactive Contamination Control... section, material and equipment in contamination areas, high contamination areas, and airborne radioactivity areas shall not be released to a controlled area if: (1) Removable surface contamination levels on...

  10. Survey of surface contamination of digital equipment in clean operating room Survey of surface contamination of digital equipment in clean operating room%洁净手术室数字化设备表面污染情况调查

    Institute of Scientific and Technical Information of China (English)

    林志敏; 章明阳; 马颖; 杨维泽

    2015-01-01

    目的:了解洁净手术室数字化设备的细菌污染状况,拟定合理的防控措施。方法2014年3月选取我院10间手术间共20个单位的数字化设备(包括电脑主机、键盘、鼠标、显示器、条码扫描及打印机)表面进行细菌分布情况及种类监测,4月采取新的防控措施后再次对该设备进行监测分析。结果3月份共检出44份阳性标本,4月共检出8份阳性标本,差异有统计学意义( P<0.05);3月检测出病原微生物菌19株,4月未检测到各类病原微生物,实施新防控措施前后差异显著。结论洁净手术室内不同区域数字化设备存在不同差异的细菌污染,采取有效的防控措施能够明显改善污染状况。%Objective To explore the condition of bacterial contamination of digitizing equipment in clean operating room, and de-velop reasonable control measures.Methods In march of 2014 , a total of 20 units of the surface of the digital equipment ( including com-puter host, keyboard, mouse, display, barcode scanning and printer) were selected from 10 operating rooms, bacterial distribution and types were monitored, again after April new prevention and control measures were taken to conduct monitoring and analysis of the device.Results 44positivespecimenswerecheckedoutinMarch,eightmasculinespecimenwerecheckedinApril,thedifferencewasstatisticallysignifi-cant (P<0.05), 19 strains of pathogenic microorganisms bacteria were checked out in March, none of pathogenic microorganisms was detec-ted in April, the significant difference before and after the implementation of the new prevention and control measures.Conclusions There exist different bacterial contamination in the different regions digital devices in the clean operating room, effective prevention and control measures can greatly improve the pollution condition.

  11. Characterization of contaminated soils using a x-ray fluorescence equipment; Caracterizacion de suelos contaminados mediante un equipo portatil de fluorescencia de rayos X

    Energy Technology Data Exchange (ETDEWEB)

    Quindos, L. S.; Fuente, I.; Sainz, C.; Queral, I.

    2006-07-01

    Fast and accurate material identification is required in many areas of the metal industry as well as surveillance of contaminated areas. The portable X-ray analyzer described in this paper consists of a hand-held probe and electronic unit. The system is configured with three excitation sources, such as ''241 Am, ''109Cd and ''55 Fe, which provides excellent performance for common elements to be controlled in contaminated soils. Data about measurements developed with this device in field as well as in the laboratory are shown in this paper. (Author)

  12. An assessment and evaluation for recycle/reuse of contaminated process and metallurgical equipment at the DOE Rocky Flats Plant Site -- Building 865. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    An economic analysis of the potential advantages of alternatives for recycling and reusing equipment now stored in Building 865 at the Rocky Flats Plant (RFP) in Colorado has been conducted. The inventory considered in this analysis consists primarily of metallurgical and process equipment used before January 1992, during development and production of nuclear weapons components at the site. The economic analysis consists of a thorough building inventory and cost comparisons for four equipment dispositions alternatives. The first is a baseline option of disposal at a Low Level Waste (LLW) landfill. The three alternatives investigated are metal recycling, reuse with the government sector, and release for unrestricted use. This report provides item-by-item estimates of value, disposal cost, and decontamination cost. The economic evaluation methods documented here, the simple cost comparisons presented, and the data provided as a supplement, should provide a foundation for D&D decisions for Building 865, as well as for similar D&D tasks at RFP and at other sites.

  13. Flame Length

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Flame length was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The tool...

  14. 23 CFR 658.13 - Length.

    Science.gov (United States)

    2010-04-01

    ... power unit behind the cab and on an over-cab rack. No State shall impose an overall length limitation of... may carry boats on the power unit so long as the length and width restrictions of the vehicles and...) in 23 CFR 658.19. (6) Munitions carriers using dromedary equipment. A truck tractor equipped with...

  15. Monitoring of airborne contamination using mobile equipment

    Energy Technology Data Exchange (ETDEWEB)

    Honkamaa, T.; Toivonen, H.; Nikkinen, M.

    1996-02-01

    Rapid and accurate measurements must be carried out in a nuclear disaster that releases radioactive material into the atmosphere. To evaluate the risk to the people, external dose rate and nuclide-specific activity concentrations in air must be determined. The Finnish Centre for Radiation and Nuclear Safety (STUK) has built an emergency vehicle to accomplish these tasks in the field. The systems and methods to determine the activity concentration in air is described in the report. (23 refs., 21 figs., 9 tabs.).

  16. Equipment for gas conversion

    Energy Technology Data Exchange (ETDEWEB)

    Tabata, K.; Matsumoto, I.

    1983-01-28

    Equipment is proposed for vapor conversion of hydrocarbons (Uv), possibly in a mixture with air, in order to produce an inorganic gas, which chiefly consists of H2 and COx. It consists of a reaction pipe made of an inorganic refractory ceramic and equipped along the wall circumference with heaters. The reaction pipe is filled with a combined, multilayer catalyst (Kt) carrier, made of gamma-A1203 which in the transverse cross section has a multipore reticular or fibrous structure. Replacement of the traditional steel (St) materials for the walls of the reaction pipe with ceramic materials reduces the output of the hydrocarbon which contaminates the surface (Pv) of the catalyst; the use of a multilayer carrier for the catalyst made of gamma-A1203 with a porous reticular or fibrous structure reduces the pressure losses in the reactor and facilitates the replacement of the spent catalyst. The equipment is designed for vapor conversion of natural gas, C3H8, and vapors of kerosene, naphtha and so on.

  17. Drilling equipment

    Energy Technology Data Exchange (ETDEWEB)

    Voyevodin, Yu.M.; Kholosha, Ye.G.; Leshchenko, A.G.; Timchenko, A.I.

    1979-01-10

    The invention refers to units designed for extracting minerals by mechanical action on the face by a cutting tool. There is a known drills which includes a pulse device which contains a combustion chamber, cylinder, piston-percussion tool and cutting tool. The combustion chamber and the sub-piston cavity of the cylinder are connected by a channel in which there is a distributor. Its shortcoming is the fact that the pulse device does not guarantee the necessary motion of the actuating mechanism for its velocity and frequency of the shocks on the cutting tool. This reduces the efficiency of the operation and limits the area of application. The purpose of the proposed invention is to improve productivity of the device. This is achieved because the head of the drill is equipped with a 2-piston pulse device which contains 2-combustion chambers, 2 working cylinders, 2 piston percussion instruments, a rod with gas-conducting and connecting channels for interconnection of the sub-piston cavities and combustion chambers of both cylinders. The spent gases of one cylinder are used for closing the combustion chamber of the second cylinder.

  18. Some Case Studies on Metal-Microbe Interactions to Remediate Heavy Metals- Contaminated Soils in Korea

    Science.gov (United States)

    Chon, Hyo-Taek

    2015-04-01

    Conventional physicochemical technologies to remediate heavy metals-contaminated soil have many problems such as low efficiency, high cost and occurrence of byproducts. Recently bioremediation technology is getting more and more attention. Bioremediation is defined as the use of biological methods to remediate and/or restore the contaminated land. The objectives of bioremediation are to degrade hazardous organic contaminants and to convert hazardous inorganic contaminants to less toxic compounds of safe levels. The use of bioremediation in the treatment of heavy metals in soils is a relatively new concept. Bioremediation using microbes has been developed to remove toxic heavy metals from contaminated soils in laboratory scale to the contaminated field sites. Recently the application of cost-effective and environment-friendly bioremediation technology to the heavy metals-contaminated sites has been gradually realized in Korea. The merits of bioremediation include low cost, natural process, minimal exposure to the contaminants, and minimum amount of equipment. The limitations of bioremediation are length of remediation, long monitoring time, and, sometimes, toxicity of byproducts for especially organic contaminants. From now on, it is necessary to prove applicability of the technologies to contaminated sites and to establish highly effective, low-cost and easy bioremediation technology. Four categories of metal-microbe interactions are generally biosorption, bioreduction, biomineralization and bioleaching. In this paper, some case studies of the above metal-microbe interactions in author's lab which were published recently in domestic and international journals will be introduced and summarized.

  19. Aquatic Equipment Information.

    Science.gov (United States)

    Sova, Ruth

    Equipment usually used in water exercise programs is designed for variety, intensity, and program necessity. This guide discusses aquatic equipment under the following headings: (1) equipment design; (2) equipment principles; (3) precautions and contraindications; (4) population contraindications; and (5) choosing equipment. Equipment is used…

  20. Inventory of Tank Farm equipment stored or abandoned aboveground

    Energy Technology Data Exchange (ETDEWEB)

    Hines, S.C.; Lakes, M.E.

    1994-10-12

    This document provides an inventory of Tank Farm equipment stored or abandoned aboveground and potentially subject to regulation. This inventory was conducted in part to ensure that Westinghouse Hanford Company (WHC) does not violate dangerous waste laws concerning storage of potentially contaminated equipment/debris that has been in contact with dangerous waste. The report identifies areas inventoried and provides photographs of equipment.

  1. Equipment. Out of order.

    Science.gov (United States)

    Connolly, C

    2000-08-17

    The NHS has underinvested in equipment for more than 20 years. Most hospitals have inadequate equipment inventories. More than half the anaesthetic machines in use are more than five years old and should be replaced. Almost a fifth of the equipment used in cancer treatment is obsolete. Current accounting systems act as a disincentive to replacing old equipment.

  2. Estimation of genome length

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The genome length is a fundamental feature of a species. This note outlined the general concept and estimation method of the physical and genetic length. Some formulae for estimating the genetic length were derived in detail. As examples, the genome genetic length of Pinus pinaster Ait. and the genetic length of chromosome Ⅵ of Oryza sativa L. were estimated from partial linkage data.

  3. Understanding Mechanisms of Radiological Contamination

    Energy Technology Data Exchange (ETDEWEB)

    Rick Demmer; John Drake; Ryan James, PhD

    2014-03-01

    Over the last 50 years, the study of radiological contamination and decontamination has expanded significantly. This paper addresses the mechanisms of radiological contamination that have been reported and then discusses which methods have recently been used during performance testing of several different decontamination technologies. About twenty years ago the Idaho Nuclear Technology Engineering Center (INTEC) at the INL began a search for decontamination processes which could minimize secondary waste. In order to test the effectiveness of these decontamination technologies, a new simulated contamination, termed SIMCON, was developed. SIMCON was designed to replicate the types of contamination found on stainless steel, spent fuel processing equipment. Ten years later, the INL began research into methods for simulating urban contamination resulting from a radiological dispersal device (RDD). This work was sponsored by the Defense Advanced Research Projects Agency (DARPA) and included the initial development an aqueous application of contaminant to substrate. Since 2007, research sponsored by the US Environmental Protection Agency (EPA) has advanced that effort and led to the development of a contamination method that simulates particulate fallout from an Improvised Nuclear Device (IND). The IND method diverges from previous efforts to create tenacious contamination by simulating a reproducible “loose” contamination. Examining these different types of contamination (and subsequent decontamination processes), which have included several different radionuclides and substrates, sheds light on contamination processes that occur throughout the nuclear industry and in the urban environment.

  4. Monitorando indicadores de desempenho relacionados ao tempo de assistência da equipe de enfermagem Identificando indicadores de desempeño relativos al tiempo de asistencia del equipo de enfermería Monitoring performance indicators regarding the length of care by the nursing team

    Directory of Open Access Journals (Sweden)

    Danielle Fabiana Cucolo

    2010-06-01

    Full Text Available Este estudo descritivo objetivou: caracterizar unidades de clínica médica-cirúrgica de um hospital filantrópico, e a equipe de enfermagem lotada nestas unidades; identificar o perfil assistencial da clientela e investigar o tempo de assistência dispensado aos pacientes pela equipe de enfermagem. Os dados foram coletados a partir de documentos dos Departamentos de Pessoal e de Enfermagem, e aplicação de instrumento de classificação de pacientes. Para cálculo das horas de assistência, utilizou-se equação proposta pelo Compromisso com a Qualidade Hospitalar (CQH. Os achados evidenciaram relação de 1:1 profissional de enfermagem/leito e variação de 0,10 a 0,21 enfermeiros/leito. Os pacientes demandaram, predominantemente, cuidados mínimos (47,1% a 79,6% e intermediários (17,7% a 38,6% e o tempo médio dispensado pela equipe de enfermagem variou de 4,1 a 5,1 horas. Os valores mostraram que as horas de assistência dispensadas pela equipe de enfermagem estavam insuficientes para atender à complexidade assistencial dos pacientes.Este estudio descriptivo tuvo como objetivos: caracterizar unidades de clínica médico-quirúrgica de un hospital filantrópico y el equipo de enfermería asignado a esas unidades; identificar el perfil asistencial de los pacientes e investigar el tiempo de asistencia dispensado a los pacientes por el equipo de enfermería. Los datos fueron recopilados a partir de documentos de los Departamentos de Personal y de Enfermería, y de la aplicación de un instrumento de clasificación de pacientes. Para el cálculo de las horas de asistencia se utilizó la ecuación propuesta por el Compromiso con la Calidad Hospitalaria (CCH. Los resultados evidenciaron relación de 1:1 profesional de enfermería/lecho y variación de 0,10 a 0,21 enfermeros/lecho. Los pacientes necesitaron, predominantemente, cuidados mínimos (47,1% a 79,6% e intermedios (17,7% a 38,6% y el promedio de tiempo dispensado por el equipo de

  5. Common NICU Equipment

    Science.gov (United States)

    ... newborn intensive care unit (NICU) > Common NICU equipment Common NICU equipment E-mail to a friend Please ... Baby Caring for your baby Feeding your baby Common illnesses Family health & safety Complications & Loss Pregnancy complications ...

  6. IMF Length Scales and Predictability: The Two Length Scale Medium

    Science.gov (United States)

    Collier, Michael R.; Szabo, Adam; Slavin, James A.; Lepping, R. P.; Kokubun, S.

    1999-01-01

    We present preliminary results from a systematic study using simultaneous data from three spacecraft, Wind, IMP 8 (Interplanetary Monitoring Platform) and Geotail to examine interplanetary length scales and their implications on predictability for magnetic field parcels in the typical solar wind. Time periods were selected when the plane formed by the three spacecraft included the GSE (Ground Support Equipment) x-direction so that if the parcel fronts were strictly planar, the two adjacent spacecraft pairs would determine the same phase front angles. After correcting for the motion of the Earth relative to the interplanetary medium and deviations in the solar wind flow from radial, we used differences in the measured front angle between the two spacecraft pairs to determine structure radius of curvature. Results indicate that the typical radius of curvature for these IMF parcels is of the order of 100 R (Sub E). This implies that there are two important IMF (Interplanetary Magnetic Field) scale lengths relevant to predictability: (1) the well-established scale length over which correlations observed by two spacecraft decay along a given IMF parcel, of the order of a few tens of Earth radii and (2) the scale length over which two spacecraft are unlikely to even observe the same parcel because of its curvature, of the order of a hundred Earth radii.

  7. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  8. RETRIEVAL EQUIPMENT DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    J. Steinhoff

    1997-08-25

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler.

  9. 2007 special equipment safety

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The General Administration of Quality Supervision, Inspection and Quarantine of P.R.China (AQSIQ) issued a notice on May 28, 2007,requiring various locations to rectify their procedures for checking special equipment and hoisting machines for hidden problems. To further clarify and implement responsibility in the safety management of special equipment in enterprises, inspection responsibilities and test organizations related to technical assurance are to be established. Further, quality inspection departments will be supervised by law in order to improve special equipment safety.

  10. Development of maintenance equipment for nuclear material fabrication equipment in a highly active hot cell

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Yang, M. S.; Kim, K. H. and others

    2000-09-01

    This report presents the development of a maintenance system for a highly contaminated nuclear material handling equipment at a hot-cell. This maintenance system has mainly three subsystems - a gamma-radiation measurement module for detecting a gamma-radiation level and identifying its distribution in-situ, a dry-type decontamination device for cleaning up contaminated particles, and a maintenance chamber for isolating contaminated equipment. The mechanical design considerations, controller, capabilities and remote operation and manipulation of the maintenance system are described. Such subsystems developed were installed and tested in the IMEF (Irradiated Material Examination Facility) M6 hot-cell after mock-up tests and performed their specific tasks successfully.

  11. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  12. Development on improved parboiling equipment for paddy rice in ...

    African Journals Online (AJOL)

    Mo

    Development on improved parboiling equipment for paddy rice in Benin. P. Houssou and E. ... shelf life of the main component of the new system combined with the high cost ... Type of rice Vegetative cycle (days). Length breath thickness.

  13. Measuring Thermodynamic Length

    Energy Technology Data Exchange (ETDEWEB)

    Crooks, Gavin E

    2007-09-07

    Thermodynamic length is a metric distance between equilibrium thermodynamic states. Among other interesting properties, this metric asymptotically bounds the dissipation induced by a finite time transformation of a thermodynamic system. It is also connected to the Jensen-Shannon divergence, Fisher information, and Rao's entropy differential metric. Therefore, thermodynamic length is of central interestin understanding matter out of equilibrium. In this Letter, we will consider how to denethermodynamic length for a small system described by equilibrium statistical mechanics and how to measure thermodynamic length within a computer simulation. Surprisingly, Bennett's classic acceptance ratio method for measuring free energy differences also measures thermodynamic length.

  14. Technology Equipment Rooms.

    Science.gov (United States)

    Day, C. William

    2001-01-01

    Examines telecommunications equipment room design features that allow for growth and can accommodate numerous equipment replacements and upgrades with minimal service disruption and with minimal cost. Considerations involving the central hub, power and lighting needs, air conditioning, and fire protection are discussed. (GR)

  15. Crack Length Detection by Digital Image Processing

    DEFF Research Database (Denmark)

    Lyngbye, Janus; Brincker, Rune

    1990-01-01

    It is described how digital image processing is used for measuring the length of fatigue cracks. The system is installed in a Personal Computer equipped with image processing hardware and performs automated measuring on plane metal specimens used in fatigue testing. Normally one can not achieve...... a resolution better then that of the image processing equipment. To overcome this problem an extrapolation technique is used resulting in a better resolution. The system was tested on a specimen loaded with different loads. The error σa was less than 0.031 mm, which is of the same size as human measuring...

  16. 40 CFR 265.114 - Disposal or decontamination of equipment, structures and soils.

    Science.gov (United States)

    2010-07-01

    ... equipment, structures and soils. 265.114 Section 265.114 Protection of Environment ENVIRONMENTAL PROTECTION... decontamination of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soil must be properly disposed of, or decontaminated unless specified otherwise...

  17. 40 CFR 264.114 - Disposal or decontamination of equipment, structures and soils.

    Science.gov (United States)

    2010-07-01

    ... equipment, structures and soils. 264.114 Section 264.114 Protection of Environment ENVIRONMENTAL PROTECTION... of equipment, structures and soils. During the partial and final closure periods, all contaminated equipment, structures and soils must be properly disposed of or decontaminated unless otherwise specified...

  18. RCT: 2.05 Contamination Control, Course #8770

    Energy Technology Data Exchange (ETDEWEB)

    Hillmer, Kurt T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-23

    This report focuses on the detection and control of radioactive contamination, which are an integral part of an aggressive ALARA program and provide an indication of the effectiveness of engineering controls and proper work practices in preventing the release of radioactive material. Radioactive contamination, if undetected or not properly controlled, can be spread and contaminate areas, equipment, personnel, and the environment.

  19. O preparo da equipe cirúrgica: aspecto relevante no controle da contaminação ambiental La preparación del equipo quirúrgico: aspecto relevante en el control de la contaminación ambiental The preparation of the surgical team: significant aspect in the control of environmental contamination

    Directory of Open Access Journals (Sweden)

    Caroline Cataneo

    2004-04-01

    Full Text Available O controle da contaminação ambiental tem sido considerado como medida racional para a prevenção da infecção do sítio cirúrgico. O objetivo deste estudo é apresentar as atuais recomendações relacionadas ao preparo da equipe cirúrgica e tecer considerações sobre o papel do enfermeiro no controle da contaminação ambiental. Baseados na literatura atual, abordamos pontos relacionados à paramentação cirúrgica e a escovação das mãos. Os estudos apontam que o preparo da equipe cirúrgica constitui barreira de proteção importante para a prevenção da infecção do sítio cirúrgico; entretanto salientam a necessidade dos profissionais de saúde realizarem os procedimentos de forma adequada.El control de la contaminación ambiental ha sido considerado como una medida racional para la prevención de la infección en el sitio quirúrgico. El objetivo de este estudio es presentar las recomendaciones actuales con respecto a la preparación del equipo quirúrgico y hacer consideraciones acerca del papel del enfermero en el control de la contaminación ambiental. Basados en la literatura actual, tratamos puntos relacionados con el vestuario quirúrgico y al cepillado de las manos. Estudios indican que la preparación del equipo quirúrgico sirve como una importante barrera de protección en la prevención de la infección en el sitio quirúrgico; sin embargo, destacan que los profesionales de salud necesitan realizar los procedimientos de manera adecuada.The control of environmental contamination has been considered a rational measure for preventing surgical site infection. This study aims to present the current recommendations related to the preparation of the surgical team and to discuss the role of nurses in controlling environmental contamination. On the basis of current literature, we treat issues related to surgical garment and hand brushing. Studies indicate that the preparation of the surgical team constitutes an important

  20. Water Contamination

    Science.gov (United States)

    ... Statistics Training & Education Policy & Recommendations Fast Facts Healthy Water Sites Healthy Water Drinking Water Healthy Swimming Global ... type=”submit” value=”Submit” /> Healthy Water Home Water Contamination Recommend on Facebook Tweet Share Compartir On ...

  1. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  2. Reliable Electronic Equipment

    Directory of Open Access Journals (Sweden)

    N. A. Nayak

    1960-05-01

    Full Text Available The reliability aspect of electronic equipment's is discussed. To obtain optimum results, close cooperation between the components engineer, the design engineer and the production engineer is suggested.

  3. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...... is considered as extruded profiles are inadequate for compact designs. An optimal pin fin shape and configuration is sought also taking manufacturing costs into consideration. Standard methods for geometrical modeling and thermal analysis are applied....

  4. Quarry Equipment Yearbook 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This issue of the journal is devoted to an annual review of developments in the equipment used for minerals extraction and recycling. For each of 12 types of equipment, an editorial review is presented of developments and a tabular presentation of suppliers' ranges and contact information, including e-mail addresses and websites. The sections are: asphalt plants, conveyors, crushers and screens, drill rigs, dump trucks, excavators, hammers, pumps, tyres, weighbridges, wheel loaders and wheel washers.

  5. [Water used for hemodialysis equipment: where is Pseudomonas aeruginosa?].

    Science.gov (United States)

    Ducki, Sébastien; Francini, Nicolas; Blech, Marie-Françoise

    2005-05-01

    The water used in dilution of the dialysis solutions constitutes an essential element of the efficiency and the safety of this therapeutics. Water must be specifically treated, and some technical rules must be respected, such as disinfection of the equipment for water treatment, to guarantee a satisfying level for whole the installation. This article reports the investigations, which were led to find the spring of Pseudomonas aeruginosa which contamined in a recurring way the water feeding dialysis equipment. The observation of samples'chronology and an analysis of the sanitary pad suggested a contamination during disinfection. Sample of residual water from the pump used for the injection of Dialox identified this reservoir as origin of the contamination. To stop this contamination by P. aeruginosa, a pump maintenance revision and purges of the system were used.

  6. Minimum Length - Maximum Velocity

    CERN Document Server

    Panes, Boris

    2011-01-01

    We study a framework where the hypothesis of a minimum length in space-time is complemented with the notion of reference frame invariance. It turns out natural to interpret the action of the obtained reference frame transformations in the context of doubly special relativity. As a consequence of this formalism we find interesting connections between the minimum length properties and the modified velocity-energy relation for ultra-relativistic particles. For example we can predict the ratio between the minimum lengths in space and time using the results from OPERA about superluminal neutrinos.

  7. [Contaminated heparins].

    Science.gov (United States)

    Monneret, C

    2008-08-01

    In January 2008, following the detection of severe allergic reaction, several batches of heparins were removed from the United-States market. Although less dramatic, comparable side effects were also reported in Germany but not in France despite the fact that low-weight heparins, obtained from contaminated batches of unfractionated heparins, were used to limit shortage. So far, tainted injectable heparin has been linked to over 80 deaths in the USA. Analyses demonstrated that such tainted heparins were contaminated by high levels of chondroïtin persulfate (5-20%), a cheaper hemi-synthetic product. All batches were furnished by several Chinese chemical industries, China representing 50% of all heparins produced worldwide. Thus, contamination of the heparin supply is a worldwide problem. Following this event, the efficiency of the quality insurance, particularly analytical controls before proceeding, remains questionable. The strict respect of the pharmaceutical chain is urgently required to avoid any kind of quality problem in the future.

  8. Subsurface Contamination Control

    Energy Technology Data Exchange (ETDEWEB)

    Y. Yuan

    2001-11-16

    There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of the subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the

  9. Subsurface Contamination Control

    Energy Technology Data Exchange (ETDEWEB)

    Y. Yuan

    2001-12-12

    There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of the subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the

  10. Telomere length and depression

    DEFF Research Database (Denmark)

    Wium-Andersen, Marie Kim; Ørsted, David Dynnes; Rode, Line

    2016-01-01

    BACKGROUND: Depression has been cross-sectionally associated with short telomeres as a measure of biological age. However, the direction and nature of the association is currently unclear. AIMS: We examined whether short telomere length is associated with depression cross-sectionally as well...... as prospectively and genetically. METHOD: Telomere length and three polymorphisms, TERT, TERC and OBFC1, were measured in 67 306 individuals aged 20-100 years from the Danish general population and associated with register-based attendance at hospital for depression and purchase of antidepressant medication....... RESULTS: Attendance at hospital for depression was associated with short telomere length cross-sectionally, but not prospectively. Further, purchase of antidepressant medication was not associated with short telomere length cross-sectionally or prospectively. Mean follow-up was 7.6 years (range 0...

  11. Myofilament length dependent activation

    Energy Technology Data Exchange (ETDEWEB)

    de Tombe, Pieter P.; Mateja, Ryan D.; Tachampa, Kittipong; Mou, Younss Ait; Farman, Gerrie P.; Irving, Thomas C. (IIT); (Loyola)

    2010-05-25

    The Frank-Starling law of the heart describes the interrelationship between end-diastolic volume and cardiac ejection volume, a regulatory system that operates on a beat-to-beat basis. The main cellular mechanism that underlies this phenomenon is an increase in the responsiveness of cardiac myofilaments to activating Ca{sup 2+} ions at a longer sarcomere length, commonly referred to as myofilament length-dependent activation. This review focuses on what molecular mechanisms may underlie myofilament length dependency. Specifically, the roles of inter-filament spacing, thick and thin filament based regulation, as well as sarcomeric regulatory proteins are discussed. Although the 'Frank-Starling law of the heart' constitutes a fundamental cardiac property that has been appreciated for well over a century, it is still not known in muscle how the contractile apparatus transduces the information concerning sarcomere length to modulate ventricular pressure development.

  12. A Characteristic Particle Length

    CERN Document Server

    Roberts, Mark D

    2015-01-01

    It is argued that there are characteristic intervals associated with any particle that can be derived without reference to the speed of light $c$. Such intervals are inferred from zeros of wavefunctions which are solutions to the Schr\\"odinger equation. The characteristic length is $\\ell=\\beta^2\\hbar^2/(8Gm^3)$, where $\\beta=3.8\\dots$; this length might lead to observational effects on objects the size of a virus.

  13. (Contaminated soil)

    Energy Technology Data Exchange (ETDEWEB)

    Siegrist, R.L.

    1991-01-08

    The traveler attended the Third International Conference on Contaminated Soil, held in Karlsruhe, Germany. The Conference was a status conference for worldwide research and practice in contaminated soil assessment and environmental restoration, with more than 1500 attendees representing over 26 countries. The traveler made an oral presentation and presented a poster. At the Federal Institute for Water, Soil and Air Hygiene, the traveler met with Dr. Z. Filip, Director and Professor, and Dr. R. Smed-Hildmann, Research Scientist. Detailed discussions were held regarding the results and conclusions of a collaborative experiment concerning humic substance formation in waste-amended soils.

  14. Equilibrium CO bond lengths

    Science.gov (United States)

    Demaison, Jean; Császár, Attila G.

    2012-09-01

    Based on a sample of 38 molecules, 47 accurate equilibrium CO bond lengths have been collected and analyzed. These ultimate experimental (reEX), semiexperimental (reSE), and Born-Oppenheimer (reBO) equilibrium structures are compared to reBO estimates from two lower-level techniques of electronic structure theory, MP2(FC)/cc-pVQZ and B3LYP/6-311+G(3df,2pd). A linear relationship is found between the best equilibrium bond lengths and their MP2 or B3LYP estimates. These (and similar) linear relationships permit to estimate the CO bond length with an accuracy of 0.002 Å within the full range of 1.10-1.43 Å, corresponding to single, double, and triple CO bonds, for a large number of molecules. The variation of the CO bond length is qualitatively explained using the Atoms in Molecules method. In particular, a nice correlation is found between the CO bond length and the bond critical point density and it appears that the CO bond is at the same time covalent and ionic. Conditions which permit the computation of an accurate ab initio Born-Oppenheimer equilibrium structure are discussed. In particular, the core-core and core-valence correlation is investigated and it is shown to roughly increase with the bond length.

  15. Observations on oesophageal length.

    Science.gov (United States)

    Kalloor, G J; Deshpande, A H; Collis, J L

    1976-01-01

    The subject of oesophageal length is discussed. The great variations in the length of the oesophagus in individual patients is noted, and the practical use of its recognition in oesophageal surgery is stressed. An apprasial of the various methods available for this measurement is made; this includes the use of external chest measurement, endoscopic measurement, and the measurement of the level of the electrical mucosal potential change. Correlative studies of these various methods are made, and these show a very high degree of significance. These studies involved simultaneous measurement of external and internal oesophageal length in 26 patients without a hiatal hernia or gastro-oesophageal length in 26 patients without a hiatal hernia or gastro-oesophageal reflux symptoms, 42 patients with sliding type hiatal hernia, and 17 patients with a peptic stricture in association with hiatal hernia. The method of measuring oesophageal length by the use of the external chest measurement, that is, the distance between the lower incisor teeth and the xiphisternum, measured with the neck fully extended and the patient lying supine, is described in detail, its practical application in oesophageal surgery is illustrated, and its validity tested by internal measurements. The findings of this study demonstrate that the external chest measurement provides a mean of assessing the true static length of the oesophagus, corrected for the size of the individual. Images PMID:941114

  16. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  17. Corrosive effects of gaseous contaminants on electrical equipment

    Energy Technology Data Exchange (ETDEWEB)

    Sera, K.; Hamamoto, J.; Kakimoto, H.

    1974-12-01

    The corrosion of outdoor apparatus by sulfur dioxide from industrial development and population growth is described. The corrosion of the field apparatus of the South Iwakuni transformer and the Shimoachi transformer is discussed. The results of SO/sub 2/ analysis are given, as well as those of corrosion tests of outdoor apparatus of the inner surface of the pipes and the compressed tanks, and an analysis of the waste gases around the terminals. The SO/sub 2/ concentration when the M.V. was 0.3-0.4 SO/sub 3/ mg/100 sq cm/day.

  18. Contaminated aerosol recovery from pulmonary function testing equipment.

    Science.gov (United States)

    Hiebert, T; Miles, J; Okeson, G C

    1999-02-01

    Clinically, the spread of infectious agents between subjects undergoing spirometry is quite uncommon. There is almost no documentation in the medical literature on this subject. We studied the retrieval of nonpathogenic Escherichia coli after aerosolizing organisms into standard pulmonary function tubing of a type that is frequently used by volume-sensing spirometers. The arrival of the aerosol at the distal end of the tubing was documented by culture. After delays of 0, 1, 5, and 10 min, respectively, air was forcibly withdrawn from the proximal end of the tubing through a special petri plate assembly. The plates were cultured and the colonies were counted. Immediately after insufflation of organisms, air withdrawn from the proximal tubing had counts similar to the air sampled at the distal end. After a 1-min delay, the proximal samples contained only rare organisms. No organisms were recovered from proximal air samples after a delay of 5 or 10 min after insufflation of organisms. The absence of detectable aerosolized E. coli after delays of 5 and 10 min after insufflation of organisms into spirometry tubing supports the hypothesis that a significant transfer of aerosolized organisms does not occur during routine pulmonary function testing as long as an interval of 5 min or more is allowed between tests.

  19. Standardization of surface contamination analysis systems

    Science.gov (United States)

    Boothe, Richard E.

    1995-01-01

    Corrosion products, oils and greases can potentially degrade material bonding properties. The Marshall Space Flight Center (MSFC) Surface Contamination Analysis Team (SCAT) utilizes a variety of analytical equipment to detect identify and quantify contamination on metallic and non-metallic substrates. Analysis techniques include FT-IR Microscopy (FT-IR), Near Infrared Optical Fiber Spectrometry (NIR), Optically Stimulated Electron Emission (OSEE), Ultraviolet Fluorescence (UVF) and Ellipsometry. To insure that consistent qualitative and quantitative information are obtained, standards are required to develop analysis techniques, to establish instrument sensitivity to potential contaminants, and to develop calibration curves. This paper describes techniques for preparing and preserving contamination standards. Calibration of surface contamination analysis systems is discussed, and methods are presented for evaluating the effects of potential contaminants on bonding properties.

  20. Dairy Equipment Lubrication

    Science.gov (United States)

    1978-01-01

    Lake To Lake Dairy Cooperative, Manitowoc, Wisconsin, operates four plants in Wisconsin for processing milk, butter and cheese products from its 1,300 member farms. The large co-op was able to realize substantial savings by using NASA information for improved efficiency in plant maintenance. Under contract to Marshall Space Flight Center, Midwest Research Institute compiled a handbook consolidating information about commercially available lubricants. The handbook details chemical and physical properties, applications, specifications, test procedures and test data for liquid and solid lubricants. Lake To Lake's plant engineer used the handbook to effect savings in maintenance labor and materials costs by reducing the number of lubricants used on certain equipment. Strict U.S. Department of Agriculture and Food and Drug Administration regulations preclude lubrication changes n production equipment, but the co-op's maintenance chief was able to eliminate seven types of lubricants for ancillary equipment, such as compressors and high pressure pumps. Handbook data enabled him to select comparable but les expensive lubricants in the materials consolidation process, and simplified lubrication schedules and procedures. The handbook is in continuing use as a reference source when a new item of equipment is purchased.

  1. Education Demonstration Equipment

    Science.gov (United States)

    Nagy, A.; Lee, R. L.

    2003-10-01

    The General Atomics fusion education program ``Scientist in the Classroom" (SIC) now in its sixth year, uses scientists and engineers to present plasma as a state of matter to students in the classroom. Using hands-on equipment, students see how magnets, gas pressure changes, and different gases are turned into plasmas. A piston, sealed volume, and vacuum chamber illuminate ideal gas laws. Liquid nitrogen is used to explore thermodynamic temperature effects and changes in states of matter. Light bulbs are excited with a Tesla coil to ionize gases, thus becoming an inexpensive plasma devices and a plasma tube shows magnetic interactions with plasma. The demonstration equipment used in this program is built with simple designs and common commercial equipment keeping in mind a teacher's tight budget. The SIC program ( ˜25 school presentations per year) has become very popular and has acquired an enthusiastic group of regular teacher clientele requesting repeat visits. In addition, three very popular and successful ``Build-It" days, sponsored by the General Atomics Fusion Education Outreach Program, enables teachers to build and keep in their classroom some of this equipment. The demonstration devices will be presented along with their ``build-it" details.

  2. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    bed, and a digital clock and a transponder helped to locate the camera. Equipment for the analysis of the nodules such as x-ray fluorescence and atomic absorption spectrophotometers were installed aboard MV Skandi Surveyor and MV Fernella and MV G A...

  3. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  4. Contaminação por Bacillus cereus em superfícies de equipamentos e utensílios em unidade de alimentação e nutrição Contamination by Bacillus cereus on equipment and utensil surfaces in a food and nutrition service unit

    Directory of Open Access Journals (Sweden)

    Renata Aparecida Mendes

    2011-09-01

    Full Text Available A constatação de que Bacillus cereus é um microrganismo que constitui problema especial em plantas de processamento de alimentos, dentre as quais se incluem restaurantes universitários, levou a realização deste trabalho, que teve como objetivo contribuir para a avaliação de riscos a que se expõem os usuários de cozinhas de grande porte, por meio da identificação de pontos do ambiente, a partir dos quais o microrganismo pode ser transferido aos alimentos. A presença de B. cereus foi detectada em 38,3% das amostras de equipamentos e utensílios estudados. As contagens atingiram até 5,7x10² UFC/cm², sendo que os valores mais elevados foram obtidos a partir de amostras dos setores de distribuição, indicando a importância destes locais como fontes potenciais de transmissão do microrganismo para os alimentos.The confirmation that Bacillus cereus is a microorganism that represents a special problem in food processing plants, such as university cafeterias, inspired this work, the scope of which was to evaluate the risks consumers are exposed to by identifying the contamination points from whence the microorganism can be transferred on to food. The presence of B. cereus was detected in 38.3% of the equipment and utensils studied. Counts of up to 5.7x10 ² CFU/cm² were found, with the highest values being found in samples from distribution sectors, indicating the importance of these areas as potential sources of microorganism transmission on to food.

  5. 10 CFR 850.29 - Protective clothing and equipment.

    Science.gov (United States)

    2010-01-01

    ... beryllium, regardless of measured exposure levels. (b) The responsible employer must comply with 29 CFR 1910... and equipment. (c) The responsible employer must establish procedures for donning, doffing, handling... that contain beryllium with contamination on their bodies or their personal clothing; and (2)...

  6. Mappability and Read Length

    Directory of Open Access Journals (Sweden)

    Wentian eLi

    2014-11-01

    Full Text Available Power-law distributions are the main functional form forthe distribution of repeat size and repeat copy number in the human genome. When the genome is broken into fragments for sequencing, the limited size offragments and reads may prevent an unique alignment of repeatsequences to the reference sequence. Repeats in the human genome canbe as long as $10^4$ bases, or $10^5-10^6$ bases when allowing for mismatches between repeat units. Sequence reads from these regions are therefore unmappable when the read length is in the range of $10^3$ bases.With the read length of exactly 1000 bases, slightly more than 1% of theassembled genome, and slightly less than 1% of the 1kbreads, are unmappable, excluding the unassembled portion of the humangenome (8% in GRCh37. The slow decay (long tail ofthe power-law function implies a diminishing return in convertingunmappable regions/reads to become mappable with the increase of theread length, with the understanding that increasing read length willalways move towards the direction of 100% mappability.

  7. Telomere Length and Mortality

    DEFF Research Database (Denmark)

    Kimura, Masayuki; Hjelmborg, Jacob V B; Gardner, Jeffrey P

    2008-01-01

    telomeres predicted the death of the first co-twin better than the mTRFL did (mTRFL: 0.56, 95% confidence interval (CI): 0.49, 0.63; mTRFL(50): 0.59, 95% CI: 0.52, 0.66; mTRFL(25): 0.59, 95% CI: 0.52, 0.66; MTRFL: 0.60, 95% CI: 0.53, 0.67). The telomere-mortality association was stronger in years 3-4 than......Leukocyte telomere length, representing the mean length of all telomeres in leukocytes, is ostensibly a bioindicator of human aging. The authors hypothesized that shorter telomeres might forecast imminent mortality in elderly people better than leukocyte telomere length. They performed mortality...... analysis in 548 same-sex Danish twins (274 pairs) aged 73-94 years, of whom 204 pairs experienced the death of one or both co-twins during 9-10 years of follow-up (1997-2007). From the terminal restriction fragment length (TRFL) distribution, the authors obtained the mean TRFL (mTRFL) and the mean values...

  8. MODERNIZATION OF CUPOLA EQUIPMENT

    Directory of Open Access Journals (Sweden)

    S. L. Rovin

    2015-01-01

    Full Text Available This article presents an automated cupola complex, developed by scientific-production enterprise «Technolit» together with GSTU named after P. O. Sukhoi, launched in the spring of 2015 at the plant «Stroiex» in the city of Chelyabinsk (the Russian Federation. The old cupolas (open type have been replaced by the new cupolas of the closed type, equipped with automatic control and management system and multistage wet gas treatment system. Cupolas are equipped with systems of post-combustion gases and the batch charging, the separate systems of air blast, systems of sludge removal and recirculation of water, the slag granulation installations, mechanized cleaning of cupola furnace and automatic safety system. These activities allowed the company to increase production and improve the quality of cast iron, reduce the coke consumption by 20% and reducing emissions of pollutants into the atmosphere almost 30 times.

  9. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  10. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  11. Relativistic length agony continued

    Directory of Open Access Journals (Sweden)

    Redžić D.V.

    2014-01-01

    Full Text Available We made an attempt to remedy recent confusing treatments of some basic relativistic concepts and results. Following the argument presented in an earlier paper (Redžić 2008b, we discussed the misconceptions that are recurrent points in the literature devoted to teaching relativity such as: there is no change in the object in Special Relativity, illusory character of relativistic length contraction, stresses and strains induced by Lorentz contraction, and related issues. We gave several examples of the traps of everyday language that lurk in Special Relativity. To remove a possible conceptual and terminological muddle, we made a distinction between the relativistic length reduction and relativistic FitzGerald-Lorentz contraction, corresponding to a passive and an active aspect of length contraction, respectively; we pointed out that both aspects have fundamental dynamical contents. As an illustration of our considerations, we discussed briefly the Dewan-Beran-Bell spaceship paradox and the ‘pole in a barn’ paradox. [Projekat Ministarstva nauke Republike Srbije, br. 171028

  12. Study on the breakup length of circular impinging jet

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Circular impinging jet, which is widely used in accelerated control cooling (ACC) equipment to accelerate the cooling of hot rolled plates, is subject to breakup, and may result in undesirable cooling effect. Therefore, the jet breakup should be avoided as possible in industrial production. The objective of this study is to find the relation of the processing parameters of the ACC equipment versus the breakup length of jet with weaker turbulence. To obtain quantitative findings, not only relative experimental study but also numerical simulation was carried out. For a weaker turbulent water jet, the breakup length increases with the increase of jet diameter, as well as with the jet velocity; jet diameter has a significant effect on the breakup length for a certain flow rate when compared with jet velocity; finally a suggested correlation of the jet breakup length versus jet Weber number is presented in this study.

  13. Ground Wood Fiber Length Distributions

    OpenAIRE

    Lauri Ilmari Salminen; Sari Liukkonen; Alava, Mikko J.

    2014-01-01

    This study considers ground wood fiber length distributions arising from pilot grindings. The empirical fiber length distributions appear to be independent of wood fiber length as well as feeding velocity. In terms of mathematics the fiber fragment distributions of ground wood pulp combine an exponential distribution for high-length fragments and a power-law distribution for smaller lengths. This implies that the fiber length distribution is influenced by the stone surface. A fragmentation-ba...

  14. How to Use Equipment Therapeutically.

    Science.gov (United States)

    Bowne, Douglas

    1986-01-01

    Shares therapeutic and economic practices surrounding equipment used in New York's Higher Horizons adventure program of therapy for troubled youth. Encourages educators, therapists, and administrators to explore relationship between equipment selection, program goals, and clients. (NEC)

  15. NIH Standard. Animal Care Equipment.

    Science.gov (United States)

    National Institutes of Health (DHEW), Bethesda, MD. Office of Administrative Management.

    The National Institutes of Health standardized animal care equipment is presented in this catalog. Each piece of equipment is illustrated and described in terms of overall dimensions, construction, and general usage. A price list is included to estimate costs in budgeting, planning, and requisitioning animal care equipment. The standards and…

  16. Virus Transfer from Personal Protective Equipment to Healthcare Employees’ Skin and Clothing

    Science.gov (United States)

    Casanova, Lisa; Alfano-Sobsey, Edie; Rutala, William A.; Weber, David J.

    2008-01-01

    We evaluated a personal protective equipment removal protocol designed to minimize wearer contamination with pathogens. Following this protocol often resulted in virus transfer to hands and clothing. An altered protocol or other measures are needed to prevent healthcare worker contamination. PMID:18680659

  17. 21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

    Science.gov (United States)

    2010-04-01

    ... HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN... or glass fragments; (v) Filth or any other extraneous material; (vi) Contaminated water; or (vii) Any other contaminants. (3) All equipment and utensils you use must be: (i) Installed and maintained...

  18. discouraged by queue length

    Directory of Open Access Journals (Sweden)

    P. R. Parthasarathy

    2001-01-01

    Full Text Available The transient solution is obtained analytically using continued fractions for a state-dependent birth-death queue in which potential customers are discouraged by the queue length. This queueing system is then compared with the well-known infinite server queueing system which has the same steady state solution as the model under consideration, whereas their transient solutions are different. A natural measure of speed of convergence of the mean number in the system to its stationarity is also computed.

  19. Abyssal soil investigation equipment

    Energy Technology Data Exchange (ETDEWEB)

    Smits, F.P.; Maggioni, W.; Mainardi, U. [ISMES, Bergamo (Italy)

    1994-12-31

    The present paper deals with the development of a testing device for quick offshore geotechnical investigations. The equipment, at present, consists of a penetrometer, mounted on a sea bed platform, a handling frame and a control cabin; a further development includes a drill rig and a geotechnical laboratory. All this is designed so as to be an autonomous unit that can be handled by various types of non-specialized ships which have the necessary deck space. The sea bed platform can operate in 2,000 m of waterdepth and is provided with a hydraulic penetrometer, with a thrust capacity of 400 kN, able to carry out cone penetration type testing until a depth of more than 100 m, as well as shallow depth continuous sampling. The penetrometer can be equipped with a series of probes (piezocone, pressiocone, total radial pressure transducer, seismic cone) allowing the execution of the wide range of direct geotechnical measurements normally performed during on-land penetration tests.

  20. Wire-Mesh-Based Sorber for Removing Contaminants from Air

    Science.gov (United States)

    Perry, Jay; Roychoudhury, Subir; Walsh, Dennis

    2006-01-01

    A paper discusses an experimental regenerable sorber for removing CO2 and trace components principally, volatile organic compounds, halocarbons, and NH3 from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to activated-carbon and zeolite-pellet sorbent beds now in use. The regenerable sorber consists mainly of an assembly of commercially available meshes that have been coated with a specially-formulated washcoat containing zeolites. The zeolites act as the sorbents while the meshes support the zeolite-containing washcoat in a configuration that affords highly effective surface area for exposing the sorbents to flowing air. The meshes also define flow paths characterized by short channel lengths to prevent excessive buildup of flow boundary layers. Flow boundary layer resistance is undesired because it can impede mass and heat transfer. The total weight and volume comparison versus the atmosphere revitalization equipment used onboard the International Space Station for CO2 and trace-component removal will depend upon the design details of the final embodiment. However, the integrated mesh-based CO2 and trace-contaminant removal system is expected to provide overall weight and volume savings by eliminating most of the trace-contaminant control equipment presently used in parallel processing schemes traditionally used for spacecraft. The mesh-based sorbent media enables integrating the two processes within a compact package. For the purpose of regeneration, the sorber can be heated by passing electric currents through the metallic meshes combined with exposure to space vacuum. The minimal thermal mass of the meshes offers the potential for reduced regeneration-power requirements and cycle time required for regeneration compared to regenerable sorption processes now in use.

  1. The Fate of Trace Contaminants in a Crewed Spacecraft Cabin Environment

    Science.gov (United States)

    Perry, Jay L.; Kayatin, Matthew J.

    2016-01-01

    Trace chemical contaminants produced via equipment offgassing, human metabolic sources, and vehicle operations are removed from the cabin atmosphere by active contamination control equipment and incidental removal by other air quality control equipment. The fate of representative trace contaminants commonly observed in spacecraft cabin atmospheres is explored. Removal mechanisms are described and predictive mass balance techniques are reviewed. Results from the predictive techniques are compared to cabin air quality analysis results. Considerations are discussed for an integrated trace contaminant control architecture suitable for long duration crewed space exploration missions.

  2. Remanufacturing strategy for chemical equipment

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xian-cheng; XU Bin-shi; WANG Hai-dou; JIANG Yi; WU Yi-xiong; GONG Jian-ming; TU Shan-dong

    2005-01-01

    Failure, especially induced by cracks, usually occurred in the service process of chemical equipment, which could cause the medium leakage, fire hazard and explosion and induced the personnel casualty and economic losses. To assure the long-term and safety service, it is necessary to apply the remanufacturing technology on the chemical equipment containing cracks. The recent research advances on the remanufacturing, the failure modes and the life extension technology for chemical equipment were reviewed. The engineering strategy of the remanufacturing for the chemical equipment was proposed, which could provide a reasonable and reliable technical route for the remanufacturing operation of chemical equipment. In the strategy, the redesign was also been considered.

  3. Hydrodynamic slip length as a surface property

    Science.gov (United States)

    Ramos-Alvarado, Bladimir; Kumar, Satish; Peterson, G. P.

    2016-02-01

    Equilibrium and nonequilibrium molecular dynamics simulations were conducted in order to evaluate the hypothesis that the hydrodynamic slip length is a surface property. The system under investigation was water confined between two graphite layers to form nanochannels of different sizes (3-8 nm). The water-carbon interaction potential was calibrated by matching wettability experiments of graphitic-carbon surfaces free of airborne hydrocarbon contamination. Three equilibrium theories were used to calculate the hydrodynamic slip length. It was found that one of the recently reported equilibrium theories for the calculation of the slip length featured confinement effects, while the others resulted in calculations significantly hindered by the large margin of error observed between independent simulations. The hydrodynamic slip length was found to be channel-size independent using equilibrium calculations, i.e., suggesting a consistency with the definition of a surface property, for 5-nm channels and larger. The analysis of the individual trajectories of liquid particles revealed that the reason for observing confinement effects in 3-nm nanochannels is the high mobility of the bulk particles. Nonequilibrium calculations were not consistently affected by size but by noisiness in the smallest systems.

  4. Hydrodynamic slip length as a surface property.

    Science.gov (United States)

    Ramos-Alvarado, Bladimir; Kumar, Satish; Peterson, G P

    2016-02-01

    Equilibrium and nonequilibrium molecular dynamics simulations were conducted in order to evaluate the hypothesis that the hydrodynamic slip length is a surface property. The system under investigation was water confined between two graphite layers to form nanochannels of different sizes (3-8 nm). The water-carbon interaction potential was calibrated by matching wettability experiments of graphitic-carbon surfaces free of airborne hydrocarbon contamination. Three equilibrium theories were used to calculate the hydrodynamic slip length. It was found that one of the recently reported equilibrium theories for the calculation of the slip length featured confinement effects, while the others resulted in calculations significantly hindered by the large margin of error observed between independent simulations. The hydrodynamic slip length was found to be channel-size independent using equilibrium calculations, i.e., suggesting a consistency with the definition of a surface property, for 5-nm channels and larger. The analysis of the individual trajectories of liquid particles revealed that the reason for observing confinement effects in 3-nm nanochannels is the high mobility of the bulk particles. Nonequilibrium calculations were not consistently affected by size but by noisiness in the smallest systems.

  5. Contamination monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Alamares, A.L. [Philippine Nuclear Research Inst., Diliman, Quezon City (Philippines)

    1997-06-01

    By virture of Republic Act 2067, as amended the Philippine Atomic Energy Commission (PAEC), now renamed Philippine Nuclear Research Institute (PNRI) is the government agency charged with the regulations and control of radioactive materials in the Philippines. The protection against the hazards of non-ionizing radiation is being monitored by the Radiological Health Service (RHS) of the Department of Health pursuant to the provision of Presidental Decree 480. The RHS issues licenses for possession, handling, and use of x-ray machines and equipment, both industrial and medical, and provide radiation protection training to x-ray technologists and technicians. As part of its regulatory function, the PNRI is charged with the responsibility of assuring that the radiation workers and the public are protected from the hazards associated with the possession, handling, production, manufacturing, and the use of radioactive materials and atomic energy facilities in the Philippines. The protection of radiation workers from the hazards of ionizing radiation has always been a primary concern of PNRI and by limiting the exposure of radiation workers, the risk to population is kept to within acceptable level. In this paper, the following items are described: radiation protection program, radiation protection services, radiation control, and problems encountered/recommendation. (G.K.)

  6. Ground Wood Fiber Length Distributions

    Directory of Open Access Journals (Sweden)

    Lauri Ilmari Salminen

    2014-01-01

    Full Text Available This study considers ground wood fiber length distributions arising from pilot grindings. The empirical fiber length distributions appear to be independent of wood fiber length as well as feeding velocity. In terms of mathematics the fiber fragment distributions of ground wood pulp combine an exponential distribution for high-length fragments and a power-law distribution for smaller lengths. This implies that the fiber length distribution is influenced by the stone surface. A fragmentation-based model is presented that allows reproduction of the empirical results.

  7. Personal protective equipment and decontamination of adults and children.

    Science.gov (United States)

    Holland, Michael G; Cawthon, David

    2015-02-01

    Accurate identification of the hazardous material is essential for proper care. Efficient hospital security and triage must prevent contaminated victims from entering the emergency department (ED) and causing secondary contamination. The decontamination area should be located outside the ambulance entrance. Decontamination priorities are protection of the health care worker, utilization of Level C personal protective equipment, and proper decontamination of the exposed patient. Decontamination proceeds in a head-to-toe sequence. Run-off water is a hazardous waste. Hospital and Community Management Planning for these emergencies is essential for proper preparation and effective response to the hazardous materials incident.

  8. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  9. Tax Adjusted for Imported Equipment

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Ministry of Finance, Central Administration of Customs, and State Administration of Taxation of P.R. of China jointly issued a "Notice on the Lists Related to the Interim Provisions on the Adjustment of Import Tax Policy on Major Technical Equipment" (the Notice) on April 13rd to adjust the list of equipment catalog and merchandise attached to the "Interim Provisions on the Import Tax Policy on Major Technical Equipment", as well as the preferential scope and extent of the import tax on a number of major technical equipment.

  10. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    Science.gov (United States)

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  11. Hydraulic Lifting Mechanisms for the Erection Equipment

    Directory of Open Access Journals (Sweden)

    B. M. Novozhilov

    2016-01-01

    Full Text Available In erection equipment of space launch complexes the hydraulic lifting mechanisms (HLM are solely and exclusively used to accomplish changing the space-mission vehicle (SMV position from horizontal to the vertical one. Existing designs of lifting mechanisms are diverse, but all of them basically contain a basic mechanism comprising one hydro-cylinder. With increasing SMV size and weight a task to design the more complicated lifting mechanisms, comprising more kinematic links and using several hydro-cylinders becomes urgent.The article conducts a detailed analysis of the basic HLM schemes and defines the features of their arrangement in erection equipment. Gives basic calculation relationships, allowing us to determine design parameters of mechanisms for stationary and transport units. Via examples of available erection equipment shows the embodiment of lifting mechanisms using basic schemes.The ways for development of HLM schemes to erect a SMV of the large size and weight are shown. Two options of the double-cylinder HLM are described. Both schemes are based on dividing a lift cycle into two parts, in each of which only one of the cylinders is in operation. The first option contains an additional, intermediate boom, with respect to which the main boom is erected. In such a mechanism the cylinders start running sequentially: at first, one of the cylinders erects the intermediate boom, then the other cylinder does the main one. The second HLM embodiment comprises a single carrier boom with the swing arm, which allows to swing the boom at a certain angle of less than 90 ° using one of the cylinders, also sequentially operating. The second cylinder allows the boom to fall into vertical position. Such schemes can reduce a stroke length of used hydraulic cylinders, which are the most expensive devices of the lifting mechanism.The analysis results are of interest to designers of erection equipment for the space launch complexes.

  12. Dental operatory design and equipment.

    Science.gov (United States)

    Floyd, M

    1993-08-01

    Improving and expanding the dental services of a practice can involve purchasing new equipment and even modifying or expanding the physical plant. Operatory design is important to the efficiency with which dental procedures can be performed. Equipment purchases to outfit the dental operatory should be made based on the specific needs and functions of a practice.

  13. Information technology equipment cooling method

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  14. Aeration equipment for small depths

    Science.gov (United States)

    Sluše, Jan; Pochylý, František

    2015-05-01

    Deficit of air in water causes complications with cyanobacteria mainly in the summer months. Cyanobacteria is a bacteria that produces poison called cyanotoxin. When the concentration of cyanobacteria increases, the phenomena "algal bloom" appears, which is very toxic and may kill all the organisms. This article describes new equipment for aeration of water in dams, ponds and reservoirs with small depth. This equipment is mobile and it is able to work without any human factor because its control is provided by a GPS module. The main part of this equipment consists of a floating pump which pumps water from the surface. Another important part of this equipment is an aerator where water and air are blended. Final aeration process runs in the nozzles which provide movement of all this equipment and aeration of the water. Simulations of the flow are solved by multiphase flow with diffusion in open source program called OpenFOAM. Results will be verified by an experiment.

  15. Equipe de trabalho

    Directory of Open Access Journals (Sweden)

    Gabriel Gerber Hornink

    2014-08-01

    Full Text Available   Equipe de Trabalho 2014 1. Equipe editorial Editor-Chefe Bayardo Bapstista Torres, Instituto de Química - USP, Brasil Eduardo Galembeck, Departamento de Bioquímica Instituto de Biologia UNICAMP, Brasil   Editores Gabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas - Unifal-MG, Brasil Vera Maria Treis Trindade, Instituto de Ciências Básicas da Saúde, Departamento de Bioquímica, Universidade Federal do Rio Grande do Sul, Brasil   Corpo Editorial Adriana Cassina, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Angel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, Espanha André Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, Brasil Denise Vaz de Macedo, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Eneida de Paula, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Guilherme Andrade Marson, Instituto de Química - USP, Brasil Jose Antonio Martinez Oyanedel, Universidad de Concepción, Chile Josep Maria Fernández Novell, Dept. Bioquímica i Biologia Molecular Universitat de Barcelona, Espanha Leila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo - USP, Brasil Manuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, Portugal Maria Lucia Bianconi, Instituto de Bioquímica Médica Universidade Federal do Rio de Janeiro (UFRJ, Brasil María Noel Alvarez, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Miguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, Espanha Nelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo - USP, Brasil Paulo De Avila

  16. LDRD report: Smoke effects on electrical equipment

    Energy Technology Data Exchange (ETDEWEB)

    TANAKA,TINA J.; BAYNES JR.,EDWARD E.; NOWLEN,STEVEN P.; BROCKMANN,JOHN E.; GRITZO,LOUIS A.; SHADDIX,CHRISTOPHER R.

    2000-03-01

    Smoke is known to cause electrical equipment failure, but the likelihood of immediate failure during a fire is unknown. Traditional failure assessment techniques measure the density of ionic contaminants deposited on surfaces to determine the need for cleaning or replacement of electronic equipment exposed to smoke. Such techniques focus on long-term effects, such as corrosion, but do not address the immediate effects of the fire. This document reports the results of tests on the immediate effects of smoke on electronic equipment. Various circuits and components were exposed to smoke from different fields in a static smoke exposure chamber and were monitored throughout the exposure. Electrically, the loss of insulation resistance was the most important change caused by smoke. For direct current circuits, soot collected on high-voltage surfaces sometimes formed semi-conductive soot bridges that shorted the circuit. For high voltage alternating current circuits, the smoke also tended to increase the likelihood of arcing, but did not accumulate on the surfaces. Static random access memory chips failed for high levels of smoke, but hard disk drives did not. High humidity increased the conductive properties of the smoke. The conductivity does not increase linearly with smoke density as first proposed; however, it does increase with quantity. The data can be used to give a rough estimate of the amount of smoke that will cause failures in CMOS memory chips, dc and ac circuits. Comparisons of this data to other fire tests can be made through the optical and mass density measurements of the smoke.

  17. Harvesting contaminants from liquid

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, John T.; Hunter, Scott R.

    2016-05-31

    Disclosed are examples of apparatuses for evaporative purification of a contaminated liquid. In each example, there is a vessel for storing the contaminated fluid. The vessel includes a surface coated with a layer of superhydrophobic material and the surface is at least partially in contact with the contaminated liquid. The contaminants do not adhere to the surface as the purified liquid evaporates, thus allowing the contaminants to be harvested.

  18. FETAL FOOT LENGTH AND HAND LENGTH: RELATIONSHIP WITH CROWN RUMP LENGTH AND GESTATIONAL AGE

    Directory of Open Access Journals (Sweden)

    Garima

    2015-12-01

    Full Text Available BACKGROUND Estimation of gestational age of fetus is of great medicolegal importance. Multiple parameters of the fetal anatomical measurements are in use. However, gestational age assessment may be difficult in fetus with anencephaly, hydrocephalus, short limb dysplasia, post mortem destruction or in mutilated case. Study of literature suggests that fetal foot has a characteristic pattern of normal growth and the fetal foot shows gradual increase in length relative to the length of the embryo and could be used to estimate gestational age. The purpose of the present study is to determine the accuracy in estimating gestational age using fetal foot and hand length by studying its relation with crown rump length in the foetuses of Manipuri origin. AIMS AND OBJECTIVES 1 To study the relationship between fetal crown rump length and fetal hand and foot length, thereby determining the accuracy in estimating gestational age by a cross-sectional study. MATERIALS AND METHODS A total of 100 formalin fixed fetuses of Manipuri origin, obtained from the Department of Obstetrics and Gynaecology, Regional Institute of Medical Sciences, Imphal, were included in the study, carried out in the Department of Anatomy, from February 2015 to July 2015. The parameters studied were crown rump length, foot length and hand length of fetuses. The data was analysed using SPSS software by regression analysis. Graphs were also plotted to determine pattern of growth and their correlation with crown rump length if any. RESULTS A total of 100 fetuses were studied, of which 43 were females and 57 were males. The mean foot length and hand length progressively increased with increase in crown rump length. Measurements were not significantly different in right or left side or among male and female fetuses. A statistically significant linear relationship was seen between foot length and crown rump length of the fetus (r=0.980, p<0.0001 and hand length and crown rump length of the fetus

  19. Apparatus for Sampling Surface Contamination

    Science.gov (United States)

    Wells, Mark

    2008-01-01

    An apparatus denoted a swab device has been developed as a convenient means of acquiring samples of contaminants from surfaces and suspending the samples in liquids. (Thereafter, the liquids can be dispensed, in controlled volumes, into scientific instruments for analysis of the contaminants.) The swab device is designed so as not to introduce additional contamination and to facilitate, simplify, and systematize the dispensing of controlled volumes of liquid into analytical instruments. The swab device is a single apparatus into which are combined all the equipment and materials needed for sampling surface contamination. The swab device contains disposable components stacked together on a nondisposable dispensing head. One of the disposable components is a supply cartridge holding a sufficient volume of liquid for one complete set of samples. (The liquid could be clean water or another suitable solvent, depending on the application.) This supply of liquid is sealed by Luer valves. At the beginning of a sampling process, the user tears open a sealed bag containing the supply cartridge. A tip on the nondisposable dispensing head is engaged with a Luer valve on one end of the supply cartridge and rotated, locking the supply cartridge on the dispensing head and opening the valve. The swab tip includes a fabric swab that is wiped across the surface of interest to acquire a sample. A sealed bag containing a disposable dispensing tip is then opened, and the swab tip is pushed into the dispensing tip until seated. The dispensing head contains a piston that passes through a spring-loaded lip seal. The air volume displaced by this piston forces the liquid out of the supply cartridge, over the swab, and into the dispensing tip. The piston is manually cycled to enforce oscillation of the air volume and thereby to cause water to flow to wash contaminants from the swab and cause the resulting liquid suspension of contaminants to flow into the dispensing tip. After several cycles

  20. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    NA

    1997-09-29

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive.

  1. IMPEDANCE OF FINITE LENGTH RESISTOR

    Energy Technology Data Exchange (ETDEWEB)

    KRINSKY, S.; PODOBEDOV, B.; GLUCKSTERN, R.L.

    2005-05-15

    We determine the impedance of a cylindrical metal tube (resistor) of radius a, length g, and conductivity {sigma}, attached at each end to perfect conductors of semi-infinite length. Our main interest is in the asymptotic behavior of the impedance at high frequency, k >> 1/a. In the equilibrium regime, , the impedance per unit length is accurately described by the well-known result for an infinite length tube with conductivity {sigma}. In the transient regime, ka{sup 2} >> g, we derive analytic expressions for the impedance and wakefield.

  2. Polyketide chain length control by chain length factor.

    Science.gov (United States)

    Tang, Yi; Tsai, Shiou-Chuan; Khosla, Chaitan

    2003-10-22

    Bacterial aromatic polyketides are pharmacologically important natural products. A critical parameter that dictates product structure is the carbon chain length of the polyketide backbone. Systematic manipulation of polyketide chain length represents a major unmet challenge in natural product biosynthesis. Polyketide chain elongation is catalyzed by a heterodimeric ketosynthase. In contrast to homodimeric ketosynthases found in fatty acid synthases, the active site cysteine is absent from the one subunit of this heterodimer. The precise role of this catalytically silent subunit has been debated over the past decade. We demonstrate here that this subunit is the primary determinant of polyketide chain length, thereby validating its designation as chain length factor. Using structure-based mutagenesis, we identified key residues in the chain length factor that could be manipulated to convert an octaketide synthase into a decaketide synthase and vice versa. These results should lead to novel strategies for the engineered biosynthesis of hitherto unidentified polyketide scaffolds.

  3. Curve Length Estimation using Vertix Chain Code Curve Length Estimation

    Directory of Open Access Journals (Sweden)

    Habibollah Haron

    2010-09-01

    Full Text Available Most of the applications in image analysis are based on Freeman chain code. In this paper, for the first time, vertex chain code (VCC proposed by Bribiesca is applied to improve length estimation of the 2D digitized curve. The chain code has some preferences such as stable in shifting, turning, mirroring movement of image and has normalized starting point. Due to the variety of length estimator methods, we focused on the three specific techniques. First, the way Bribiesca proposed which is based on counting links between vertices; second, based on maximum length digital straight segments (DSSs and lastly local metrics. The results of these length estimators with the real perimeter are compared. Results thus obtained exhibits thatlength estimation using VCC is nearest to the actual length.

  4. Zoning Method to Predict Contaminant Sources in Turbulent-Type Cleanroom

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. K.; Sung, H. G. [Sungkyunkwan University, Seoul (Korea, Republic of); Han, S. M.; Hwang, Y. K. [Korea Marine Equipment Research Institute, Seoul (Korea, Republic of)

    2015-03-15

    Particle contamination in a cleanroom is very complex with a complicated process and several pieces of spreading equipment. Detailed information on the locations of the contamination sources and the path of the contamination is needed for economical and efficient control of the contaminant particles in such a cleanroom. An allocation method was developed to quantitatively predict the contamination generated from the pollution sources. In this paper, we propose a zoning method to accelerate the computation time for estimating the contributions. Our results showed that we can quantitatively estimate the amount of contamination generated from pollution sources.

  5. ENERGY STAR Certified Imaging Equipment

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Imaging Equipment that are effective as of...

  6. EAS Equipment Authorization Grantee Registrations

    Data.gov (United States)

    Federal Communications Commission — EAS (Equipment Authorization System). Radio Frequency (RF) devices are required to be properly authorized under 47 CFR Part 2 prior to being marketed or imported...

  7. EMR Measurements on NDA Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Macdonell, Alexander Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Meierbachtol, Krista Cruse [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Evans, James Walter Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mayo, Douglas R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-10

    Electromagnetic radiation (EMR) emission strength measurements were performed on a suite of passive non-destructive assay (NDA) radiation detection equipment. Data were collected from 9 kHz up to 6 GHz on each of the assembled systems.

  8. An audit of the use of manual handling equipment and their microbiological flora--implications for infection control.

    Science.gov (United States)

    Barnett, J; Thomlinson, D; Perry, C; Marshall, R; MacGowan, A P

    1999-12-01

    A review of the use of manual handling aids in two hospitals found equipment was employed on a multi-patient basis with inadequate cleaning. Sampling with a Casella slit sampler demonstrated frequent contamination by methicillin-resistant Staphylococcus aureus and Clostridium difficile of fabric aids. Recommendations for care of equipment are made.

  9. Military GPS User Equipment (MGUE)

    Science.gov (United States)

    2015-04-29

    Space and Missile Systems Center Military GPS User Equipment (MGUE) Lt Col James “Mutt” Wilson Program Manager 29 Apr 15 Information contained in...SUBTITLE Military GPS User Equipment (MGUE) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...SUPPLEMENTARY NOTES Presented at the GPS Partnership Council 2015 (GPSPC15), held April 29 to May 1, 2015, at the Los Angeles AFB, CA. 14. ABSTRACT

  10. Nuclear Weapon and Military Equipment

    Directory of Open Access Journals (Sweden)

    N. Natarajan

    1985-10-01

    Full Text Available Military equipment must survive a, nuclear attack if enough personnel required to operate them remain combat effective. To achieve this goal, the criteria that determine equipment survivability should be established and any new design should incorporate these criteria to evolve a hardened design. An analysis of the overall response by considering the response to each individual nuclear environment can result in a balanced overall hardened system. The paper discusses the criteria required to be known.

  11. Factors Affecting Microbial Contamination of Market Eggs: A Review

    Directory of Open Access Journals (Sweden)

    Svobodová J.

    2015-01-01

    Full Text Available The aim of the review was to analyze the ways of microbial contamination, the protective mechanism of egg, and factors that affect the quantity of contamination and microbial penetration. Eggs can be contaminated during their formation in the infected reproductive organs of hens or after laying, when eggs are exposed to contaminated environment. The eggs are equipped against microbial contamination by several protective mechanisms comprising the presence of cuticle, eggshell, eggshell membranes, occurrence of some antibacterial proteins, and high pH value of albumen. There are several factors that affect the quantity of microbial contamination and penetration such as species of bacteria, the amount of microorganisms, storage conditions, quality of eggshell or number of pores.

  12. Impedance of Finite Length Resistor

    CERN Document Server

    Krinsky, Samuel; Podobedov, Boris

    2005-01-01

    We determine the impedance of a cylindrical metal tube (resistor) of radius a and length g, attached at each end to perfect conductors of semi-infinite length. Our main interest is in the behavior of the impedance at high frequency (k>>1/a). In the equilibrium regime, ka2

  13. Line Lengths and Starch Scores.

    Science.gov (United States)

    Moriarty, Sandra E.

    1986-01-01

    Investigates readability of different line lengths in advertising body copy, hypothesizing a normal curve with lower scores for shorter and longer lines, and scores above the mean for lines in the middle of the distribution. Finds support for lower scores for short lines and some evidence of two optimum line lengths rather than one. (SKC)

  14. Research on Selection of Equipment Maintenance Modes

    Institute of Scientific and Technical Information of China (English)

    SHANG Wen-li; SHI Hai-bo; HE Bai-tao

    2006-01-01

    The development of equipment maintenance management is introduced, and equipment maintenance concept is defined. Equipment maintenance modes are classified, analyzed and compared, which merits and demerits are pointed out. At last, a decision-making frame to select equipment maintenance modes is advanced, and steps to select and implement equipment maintenance are given.

  15. 14 CFR 25.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 25.1415 Section 25.1415... STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Safety Equipment § 25.1415 Ditching equipment. (a) Ditching equipment used in airplanes to be certificated for ditching under § 25.801, and required by...

  16. Gestation length in farmed reindeer.

    Science.gov (United States)

    Shipka, M P; Rowell, J E

    2010-01-01

    Reindeer (Rangifer tarandus tarundus) are the only cervids indigenous to the arctic environment. In Alaska, reindeer are a recognized agricultural species and an economic mainstay for many native populations. Traditionally raised in extensive free-ranging systems, a recent trend toward intensive farming requires a more in-depth knowledge of reproductive management. Reported gestation length in reindeer varies, ranging from 198 to 229 d in studies performed at the University of Alaska Fairbanks. A switchback study that manipulated only breeding date demonstrated a mean increase in gestation length of 8.5 d among females bred early in the season. The negative correlation between conception date and gestation length is consistent with reindeer research at other locations and reports of variable gestation length in a growing number of domestic and non-domestic species. This paper reviews the phenomenon in reindeer and discusses some of the factors known to affect gestation length as well as possible areas for future research.

  17. Reserved-Length Prefix Coding

    CERN Document Server

    Baer, Michael B

    2008-01-01

    Huffman coding finds an optimal prefix code for a given probability mass function. Consider situations in which one wishes to find an optimal code with the restriction that all codewords have lengths that lie in a user-specified set of lengths (or, equivalently, no codewords have lengths that lie in a complementary set). This paper introduces a polynomial-time dynamic programming algorithm that finds optimal codes for this reserved-length prefix coding problem. This has applications to quickly encoding and decoding lossless codes. In addition, one modification of the approach solves any quasiarithmetic prefix coding problem, while another finds optimal codes restricted to the set of codes with g codeword lengths for user-specified g (e.g., g=2).

  18. Contaminant analysis automation demonstration proposal

    Energy Technology Data Exchange (ETDEWEB)

    Dodson, M.G.; Schur, A.; Heubach, J.G.

    1993-10-01

    The nation-wide and global need for environmental restoration and waste remediation (ER&WR) presents significant challenges to the analytical chemistry laboratory. The expansion of ER&WR programs forces an increase in the volume of samples processed and the demand for analysis data. To handle this expanding volume, productivity must be increased. However. The need for significantly increased productivity, faces contaminant analysis process which is costly in time, labor, equipment, and safety protection. Laboratory automation offers a cost effective approach to meeting current and future contaminant analytical laboratory needs. The proposed demonstration will present a proof-of-concept automated laboratory conducting varied sample preparations. This automated process also highlights a graphical user interface that provides supervisory, control and monitoring of the automated process. The demonstration provides affirming answers to the following questions about laboratory automation: Can preparation of contaminants be successfully automated?; Can a full-scale working proof-of-concept automated laboratory be developed that is capable of preparing contaminant and hazardous chemical samples?; Can the automated processes be seamlessly integrated and controlled?; Can the automated laboratory be customized through readily convertible design? and Can automated sample preparation concepts be extended to the other phases of the sample analysis process? To fully reap the benefits of automation, four human factors areas should be studied and the outputs used to increase the efficiency of laboratory automation. These areas include: (1) laboratory configuration, (2) procedures, (3) receptacles and fixtures, and (4) human-computer interface for the full automated system and complex laboratory information management systems.

  19. Contaminated Sites in Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Sites contaminated by hazardous materials or wastes. These sites are those administered by the Contaminated Sites Section of Iowa DNR. Many are sites which are...

  20. Center for Contaminated Sediments

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Army Corps of Engineers Center for Contaminated Sediments serves as a clearinghouse for technology and expertise concerned with contaminated sediments. The...

  1. Minimum length-maximum velocity

    Science.gov (United States)

    Panes, Boris

    2012-03-01

    We study a framework where the hypothesis of a minimum length in space-time is complemented with the notion of reference frame invariance. It turns out natural to interpret the action of the obtained reference frame transformations in the context of doubly special relativity. As a consequence of this formalism we find interesting connections between the minimum length properties and the modified velocity-energy relation for ultra-relativistic particles. For example, we can predict the ratio between the minimum lengths in space and time using the results from OPERA on superluminal neutrinos.

  2. CERN lifting equipment use authorisation

    CERN Multimedia

    2004-01-01

    Updated procedures to obtain authorisation to use lifting equipment at CERN have been put in place. As a general rule, lifting equipment at CERN may be operated only by qualified staff, i.e. those who have had intensive training in and adequate experience of using such equipment. However, for straightforward recurrent lifting operations, the Organization issues authorisations to operate lifting equipment at CERN to people who have followed a suitable course of training. The authorisation to use lifting equipment is valid for five years. More information about the procedures will be found at the following addresses: CERN Staff: http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_staff.htm Associated members of the personnel (users, ...) : http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_users.htm Contractors personnel : http://sc-gs.web.cern.ch/sc-gs/gs_ms/ms/freq%20topics/te_mc_FT_peoplefromext.htm In case of questions, please send a message to: securite...

  3. Mining equipment manufacturers; 17th ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping, and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  4. Mining equipment manufacturers. 13th edition

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  5. Aerodynamics Laboratory Facilities, Equipment, and Capabilities

    Data.gov (United States)

    Federal Laboratory Consortium — The following facilities, equipment, and capabilities are available in the Aerodynamics Laboratory Facilities and Equipment (1) Subsonic, open-jet wind tunnel with...

  6. Rulison: radiation contamination clearance report

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-01

    Under contract with Austral Oil Company, Eberline Instrument Corporation provided supervision and technicians to radiologically support the well plugging and site abandonment activities at the Project Rulison site during the period September 1, 1976 through October 12, 1976. The purpose of the support was to identify and prepare for removal of all radioactively contaminated materials remaining on site. The emplacement and reentry wells were successfully plugged without a serious radiological incident. There was no measurable radiation exposure above natural background to participating personnel. Decontamination and monitoring procedures assured that no equipment or material was improperly released to unrestricted use. A review of the history of project operations, the conduct of comprehensive sampling programs, and an extensive final survey, ensures that the extent of radioactivity on the site is identified and that such activity is well below established guide lines. Except for appropriate restrictions regarding deep drilling, the radiological condition of the Project Rulison site permits its return to unrestricted use.

  7. Pairing versus quarteting coherence length

    CERN Document Server

    Delion, Doru S

    2015-01-01

    We systematically analyse the coherence length in even-even nuclei. The pairing coherence length in the spin-singlet channel for the effective density dependent delta (DDD) and Gaussian interaction is estimated. We consider in our calculations bound states as well as narrow resonances. It turns out that the pairing gaps given by the DDD interaction are similar to those of the Gaussian potential if one renormalizes the radial width to the nuclear radius. The correlations induced by the pairing interaction have in all considered cases a long range character inside the nucleus and decrease towards the surface. The mean coherence length is larger than the geometrical radius for light nuclei and approaches this value for heavy nuclei. The effect of the temperature and states in continuum is investigated. Strong shell effects are evidenced, especially for protons. We generalize this concept to quartets by considering similar relations, but between proton and neutron pairs. The quartet coherence length has a similar...

  8. Length Invisibilization of Tachyonic Neutrinos

    Science.gov (United States)

    Estakhr, Ahmad Reza

    2016-09-01

    Faster than the speed of light particle such as tachyonic neutrino due to its superluminal nature disapper and is undetectable. L = iΩ-1Lo where, i =√{ - 1 } is imaginary Number, Ω = 1 /√{βs2 - 1 } is Estakhr's Omega factor, L is the Superluminal Length, Lo is the proper length, βs =Vs / c > 1 is superluminal speed parameter, Vs is Superluminal velocity and c is speed of light.

  9. MULTIDISCIPLINARIDADE E TRABALHO EM EQUIPE

    Directory of Open Access Journals (Sweden)

    Helmuth Krüger

    2013-10-01

    Full Text Available Foram dois os objetivos deste trabalho: estabelecer critérios para a comparação de pesquisas científicas e analisar alguns problemas psicossociais que podem ocorrer em equipes multiprofissionais. Conclui-se que os critérios de comparação podem ser os quatro componentes de qualquer disciplina científica: o conjunto dos pressupostos filosóficos, o objeto a investigar, a metodologia de pesquisa e a linguagem técnica empregada na elaboração de teorias. Quanto às equipes multiprofissionais, foram analisados 3 problemas: a atribuição de papéis sociais, a confidencialidade das informações e as diferenças de prestígio social entre os membros dessas equipes.

  10. Another donation of computer equipment

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On Thursday 27 February, CERN was pleased to donate computer equipment to a physics institute in the Philippines.   H.E. Leslie J. Baja and Rolf Heuer. Following donations of computer equipment to institutes in Morocco, Ghana, Bulgaria, Serbia and Egypt, CERN is to send 50 servers and 4 network switches to the National Institute of Physics at the University of the Philippines Diliman. CERN’s Director-General Rolf Heuer and the Ambassador of the Philippines to Switzerland and Lichtenstein, H.E. Leslie J. Baja, spoke of their enthusiasm for the project during an official ceremony. The equipment will be used for various high energy physics research programmes in the Philippines and for the University’s development of digital resources for science.

  11. Detection and reduction of tungsten contamination in ion implantation processes

    Energy Technology Data Exchange (ETDEWEB)

    Polignano, M.L.; Galbiati, A.; Grasso, S.; Mica, I.; Barbarossa, F.; Magni, D. [STMicroelectronics, Agrate Brianza (Italy)

    2016-12-15

    In this paper, we review the results of some studies addressing the problem of tungsten contamination in implantation processes. For some tests, the implanter was contaminated by implantation of wafers with an exposed tungsten layer, resulting in critical contamination conditions. First, DLTS (deep level transient spectroscopy) measurements were calibrated to measure tungsten contamination in ion-implanted samples. DLTS measurements of tungsten-implanted samples showed that the tungsten concentration increases linearly with the dose up to a rather low dose (5 x 10{sup 10} cm{sup -2}). Tungsten deactivation was observed when the dose was further increased. Under these conditions, ToF-SIMS revealed tungsten at the wafer surface, showing that deactivation was due to surface segregation. DLTS calibration could therefore be obtained in the linear dose regime only. This calibration was used to evaluate the tungsten contamination in arsenic implantations. Ordinary operating conditions and critical contamination conditions of the equipment were compared. A moderate tungsten contamination was observed in samples implanted under ordinary operating conditions. This contamination was easily suppressed by a thin screen oxide. On the contrary, implantations in critical conditions of the equipment resulted in a relevant tungsten contamination, which could be reduced but not suppressed even by a relatively thick screen oxide (up to 150 Aa). A decontamination process consisting of high dose implantations of dummy wafers was tested for its efficiency to remove tungsten and titanium contamination. This process was found to be much more effective for titanium than for tungsten. Finally, DLTS proved to be much more sensitive that TXRF (total reflection X-ray fluorescence) in detecting tungsten contamination. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  13. Mechanical (turbines and auxiliary equipment)

    CERN Document Server

    Sherry, A; Cruddace, AE

    2013-01-01

    Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

  14. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  15. Problems of Outsourcing when Repairing and Servicing Production Equipment

    Directory of Open Access Journals (Sweden)

    Medvedeva Marina I.

    2013-11-01

    Full Text Available The article is devoted to the issue of calculation of stationary probabilities of states of the system of mass servicing with unreliable equipment, servicing and re-adjustment at the beginning of the production cycle. The article describes functioning both of the main and auxiliary material flow of the logistic system. It is supposed that the incoming flow for processing or orders has a Poisson distribution and the time of breakage of equipment, the time of re-adjustment and the time of servicing have indicative laws of distribution. Equipment is serviced by two crews: maintenance and service. The maintenance crew repairs broken equipment and the orders on the device are not lost but are serviced during the time left. The second crew deals only with servicing works. The article considers one of the possible schemes when the equipment required for completion of the production cycle is sent for servicing. There are no restrictions with respect to the length of the queue. The article finds main characteristics of the above described system, namely: probability that the device is not in working condition and is sent for servicing and re-adjustment. The found probabilities of states of the described system could be used for assessment of expediency of the repair outsourcing at industrial enterprises.

  16. Situ treatment of contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    McNab, Jr., Walt W. (Concord, CA); Ruiz, Roberto (Tracy, CA); Pico, Tristan M. (Livermore, CA)

    2001-01-01

    A system for treating dissolved halogenated organic compounds in groundwater that relies upon electrolytically-generated hydrogen to chemically reduce the halogenated compounds in the presence of a suitable catalyst. A direct current is placed across at least a pair, or an array, of electrodes which are housed within groundwater wells so that hydrogen is generated at the cathode and oxygen at the anode. A pump is located within the well housing in which the cathode(s) is(are) located and draws in groundwater where it is hydrogenated via electrolysis, passes through a well-bore treatment unit, and then transported to the anode well(s) for reinjection into the ground. The well-bore treatment involves a permeable cylinder located in the well bore and containing a packed bed of catalyst material that facilitates the reductive dehalogenation of the halogenated organic compounds by hydrogen into environmentally benign species such as ethane and methane. Also, electro-osmatic transport of contaminants toward the cathode also contributes to contaminant mass removal. The only above ground equipment required are the transfer pipes and a direct circuit power supply for the electrodes. The electrode wells in an array may be used in pairs or one anode well may be used with a plurality of cathode wells. The DC current flow between electrode wells may be periodically reversed which controls the formation of mineral deposits in the alkaline cathode well-bore water, as well as to help rejuvenate the catalysis.

  17. Strategy Guideline. HVAC Equipment Sizing

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, Arlan [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-02-01

    This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, FL. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  18. Lifting operations and lifting equipment

    NARCIS (Netherlands)

    Douwes, M.

    2013-01-01

    Lifting operations are inherent to many occupations in the construction industry. They can be performed manually or using lifting equipment. Both manual lifting and mechanical lifting operations can put construction workers at great risk of injury or health symptoms causing sick leave or disability.

  19. [Hygienic maintenance of water mist-generating equipment that couples directly to the tap].

    Science.gov (United States)

    Hamatake, Michiko; Aoki, Rie; Yamazaki, Mitsugu; Ohnishi, Kenjiro; Matsumoto, Kazutoshi

    2015-01-01

    Water mist is usually generated using equipment directly connected to the water tap, as its installation is relatively easy. However, there is no legal regulation regarding the maintenance of this equipment, and the quality of the mist has not been sufficiently well investigated. In this study, we sought to establish methods that allow the hygienic maintenance of this equipment. We monitored the use of the mist generating equipment in five of the 61 institutions in the jurisdiction of Ichinomiya Health Center, examined the resulting water quality, and tested for Legionella bacteria in the mist. If equipment was found to contain bacteria, the contaminated part was identified by counting the number of bacteria in the water after sequentially washing and disinfecting parts of the equipment. We also identified the predominant bacterial species. In the water mists from three of 5 institutions, the number of bacteria greatly exceeded that permitted for drinking-water, even though the residual chlorine level was >0.1 mg/l. However, no Legionella bacteria were detected. Brevundimonas species were predominant in the water mists at each institute. The hose was found to be the contaminated component in each case. Our findings suggest that the number of bacteria in the water mist exceeded the drinking-water quality standard, even with a residual chlorine level of >0.1 mg/l. This study also revealed the importance of the continued drainage of water, following suitable cleaning and disinfection for maintenance of the mist-generating equipment.

  20. 21 CFR 58.61 - Equipment design.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Equipment design. 58.61 Section 58.61 Food and... PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  1. 40 CFR 792.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Equipment design. 792.61 Section 792.61...) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall...

  2. Energy-related laboratory equipment (ERLE) guidelines

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This document describes the Used Energy-Related Laboratory Equipment grants, and eligibility and procedures for participation. The document contains tables identifying typical equipment that may be requested, where to review ERLE equipment lists, and where to mail applications, a description of the eligible equipment grants access data system, and a copy of the ERLE grant application and instructions for its completion and submission.

  3. 21 CFR 606.60 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Equipment. 606.60 Section 606.60 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Equipment § 606.60 Equipment. (a) Equipment used in the collection, processing,...

  4. 7 CFR 58.626 - Packaging equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging equipment. 58.626 Section 58.626 Agriculture....626 Packaging equipment. Packaging equipment designed to mechanically fill and close single service... Standards for Equipment for Packaging Frozen Desserts and Cottage Cheese. Quality Specifications for...

  5. 14 CFR 27.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 27.1415 Section 27.1415... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1415 Ditching equipment. (a) Emergency... accommodate one life preserver for each occupant for which certification for ditching is requested. (c)...

  6. 14 CFR 29.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 29.1415 Section 29.1415 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Safety Equipment § 29.1415 Ditching equipment....

  7. 46 CFR 197.460 - Diving equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Diving equipment. 197.460 Section 197.460 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Periodic Tests and Inspections of Diving Equipment § 197.460 Diving equipment. The diving supervisor shall insure that the diving equipment designated for...

  8. 40 CFR 160.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  9. Persistence Length of Stable Microtubules

    Science.gov (United States)

    Hawkins, Taviare; Mirigian, Matthew; Yasar, M. Selcuk; Ross, Jennifer

    2011-03-01

    Microtubules are a vital component of the cytoskeleton. As the most rigid of the cytoskeleton filaments, they give shape and support to the cell. They are also essential for intracellular traffic by providing the roadways onto which organelles are transported, and they are required to reorganize during cellular division. To perform its function in the cell, the microtubule must be rigid yet dynamic. We are interested in how the mechanical properties of stable microtubules change over time. Some ``stable'' microtubules of the cell are recycled after days, such as in the axons of neurons or the cilia and flagella. We measured the persistence length of freely fluctuating taxol-stabilized microtubules over the span of a week and analyzed them via Fourier decomposition. As measured on a daily basis, the persistence length is independent of the contour length. Although measured over the span of the week, the accuracy of the measurement and the persistence length varies. We also studied how fluorescently-labeling the microtubule affects the persistence length and observed that a higher labeling ratio corresponded to greater flexibility. National Science Foundation Grant No: 0928540 to JLR.

  10. CEBAF Upgrade Bunch Length Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Mahmoud [Old Dominion Univ., Norfolk, VA (United States)

    2016-05-01

    Many accelerators use short electron bunches and measuring the bunch length is important for efficient operations. CEBAF needs a suitable bunch length because bunches that are too long will result in beam interruption to the halls due to excessive energy spread and beam loss. In this work, bunch length is measured by invasive and non-invasive techniques at different beam energies. Two new measurement techniques have been commissioned; a harmonic cavity showed good results compared to expectations from simulation, and a real time interferometer is commissioned and first checkouts were performed. Three other techniques were used for measurements and comparison purposes without modifying the old procedures. Two of them can be used when the beam is not compressed longitudinally while the other one, the synchrotron light monitor, can be used with compressed or uncompressed beam.

  11. Keeping disease at arm's length

    DEFF Research Database (Denmark)

    Lassen, Aske Juul

    2015-01-01

    active ageing change everyday life with chronic disease, and how do older people combine an active life with a range of chronic diseases? The participants in the study use activities to keep their diseases at arm’s length, and this distancing of disease at the same time enables them to engage in social...... and physical activities at the activity centre. In this way, keeping disease at arm’s length is analysed as an ambiguous health strategy. The article shows the importance of looking into how active ageing is practised, as active ageing seems to work well in the everyday life of the older people by not giving...... emphasis to disease. The article is based on ethnographic fieldwork and uses vignettes of four participants to show how they each keep diseases at arm’s length....

  12. Spreading lengths of Hermite polynomials

    CERN Document Server

    Sánchez-Moreno, P; Manzano, D; Yáñez, R; 10.1016/j.cam.2009.09.043

    2009-01-01

    The Renyi, Shannon and Fisher spreading lengths of the classical or hypergeometric orthogonal polynomials, which are quantifiers of their distribution all over the orthogonality interval, are defined and investigated. These information-theoretic measures of the associated Rakhmanov probability density, which are direct measures of the polynomial spreading in the sense of having the same units as the variable, share interesting properties: invariance under translations and reflections, linear scaling and vanishing in the limit that the variable tends towards a given definite value. The expressions of the Renyi and Fisher lengths for the Hermite polynomials are computed in terms of the polynomial degree. The combinatorial multivariable Bell polynomials, which are shown to characterize the finite power of an arbitrary polynomial, play a relevant role for the computation of these information-theoretic lengths. Indeed these polynomials allow us to design an error-free computing approach for the entropic moments (w...

  13. Continuous lengths of oxide superconductors

    Science.gov (United States)

    Kroeger, Donald M.; List, III, Frederick A.

    2000-01-01

    A layered oxide superconductor prepared by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon. A continuous length of a second substrate ribbon is overlaid on the first substrate ribbon. Sufficient pressure is applied to form a bound layered superconductor precursor powder between the first substrate ribbon and the second substrate ribbon. The layered superconductor precursor is then heat treated to establish the oxide superconducting phase. The layered oxide superconductor has a smooth interface between the substrate and the oxide superconductor.

  14. Overview of bunch length measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A. H.

    1999-02-19

    An overview of particle and photon beam bunch length measurements is presented in the context of free-electron laser (FEL) challenges. Particle-beam peak current is a critical factor in obtaining adequate FEL gain for both oscillators and self-amplified spontaneous emission (SASE) devices. Since measurement of charge is a standard measurement, the bunch length becomes the key issue for ultrashort bunches. Both time-domain and frequency-domain techniques are presented in the context of using electromagnetic radiation over eight orders of magnitude in wavelength. In addition, the measurement of microbunching in a micropulse is addressed.

  15. Multiservice Tactics, Techniques, and Procedures for Chemical, Biological, Radiological and Nuclear Contamination Avoidance

    Science.gov (United States)

    2006-02-01

    contaminants, and these contaminants accumulate. Even if the hazard area is small, it can be deadly . Persons working around equipment should be...Cataract formation. • Chronic radiodermatitis. • Decreased fertility . • Genetic mutations. The effect upon future generations is unclear. Data from...a) Apply insect repellant on the exposed skin. (b) Gain intelligence on the threat capabilities and intentions. (c) Seek out

  16. Bioremediation of contaminated groundwater

    Science.gov (United States)

    Hazen, Terry C.; Fliermans, Carl B.

    1995-01-01

    An apparatus and method for in situ remediation of contaminated subsurface soil or groundwater contaminated by chlorinated hydrocarbons. A nutrient fluid is selected to stimulate the growth and reproduction of indigenous subsurface microorganisms that are capable of degrading the contaminants; an oxygenated fluid is selected to create a generally aerobic environment for these microorganisms to degrade the contaminants, leaving only pockets that are anaerobic. The nutrient fluid is injected periodically while the oxygenated fluid is injected continuously and both are extracted so that both are drawn across the plume. The nutrient fluid stimulates microbial colony growth; withholding it periodicially forces the larger, healthy colony of microbes to degrade the contaminants. Treatment is continued until the subsurface concentration of contaminants is reduced to an acceptable, preselected level. The nutrient fluid can be methane and the oxygenated fluid air for stimulating production of methanotrophs to break down chlorohydrocarbons, especially trichloroethylene (TCE) and tetrachloroethylene.

  17. JPL Contamination Control Engineering

    Science.gov (United States)

    Blakkolb, Brian

    2013-01-01

    JPL has extensive expertise fielding contamination sensitive missions-in house and with our NASA/industry/academic partners.t Development and implementation of performance-driven cleanliness requirements for a wide range missions and payloads - UV-Vis-IR: GALEX, Dawn, Juno, WFPC-II, AIRS, TES, et al - Propulsion, thermal control, robotic sample acquisition systems. Contamination control engineering across the mission life cycle: - System and payload requirements derivation, analysis, and contamination control implementation plans - Hardware Design, Risk trades, Requirements V-V - Assembly, Integration & Test planning and implementation - Launch site operations and launch vehicle/payload integration - Flight ops center dot Personnel on staff have expertise with space materials development and flight experiments. JPL has capabilities and expertise to successfully address contamination issues presented by space and habitable environments. JPL has extensive experience fielding and managing contamination sensitive missions. Excellent working relationship with the aerospace contamination control engineering community/.

  18. 21 CFR 600.11 - Physical establishment, equipment, animals, and care.

    Science.gov (United States)

    2010-04-01

    ... establishment, equipment, animals, and care. (a) Work areas. All rooms and work areas where products are... the extent necessary to prevent cross-contamination. (f) Animals used in manufacture—(1) Care of... shall be sufficient in number and have adequate experience to insure adequate care. Animal quarters...

  19. Length Normalization in XML Retrieval

    NARCIS (Netherlands)

    Kamps, Jaap; Rijke, Maarten de; Sigurbjörnsson, Börkur

    2005-01-01

    The full paper appeared as: J. Kamps, M. de Rijke, and B. Sigurbj¨ornsson, “Length Normalization in XML Retrieval,” In: Proceedings 27th Annual International ACM SIGIR Conference (SIGIR 2004), pages 80-87, 2004.

  20. Finite length Taylor Couette flow

    Science.gov (United States)

    Streett, C. L.; Hussaini, M. Y.

    1987-01-01

    Axisymmetric numerical solutions of the unsteady Navier-Stokes equations for flow between concentric rotating cylinders of finite length are obtained by a spectral collocation method. These representative results pertain to two-cell/one-cell exchange process, and are compared with recent experiments.

  1. 7 Length-weight relationship

    African Journals Online (AJOL)

    Administrator

    from which stomachs were extracted for the analysis of the food contents, using frequency of occurrence, numerical and ... both fish species showed strong correlation between the weight and length with correlation coefficient (r) and ..... Basic data on the assessment of Sphyraena ... review of methods and their application.

  2. Persistence length of dendronized polymers

    NARCIS (Netherlands)

    Mikhailov, I.V.; Darinskii, A.A.; Zhulina, E.B.; Borisov, O.V.; Leermakers, F.A.M.

    2015-01-01

    We present numerical results for the thermodynamic rigidity and induced persistence length of dendronized polymers with systematically varied topology of their grafts obtained by the Scheutjens-Fleer self-consistent field method. The results were compared to predictions of an analytical mean-fiel

  3. Fractional baud-length coding

    Directory of Open Access Journals (Sweden)

    J. Vierinen

    2011-06-01

    Full Text Available We present a novel approach for modulating radar transmissions in order to improve target range and Doppler estimation accuracy. This is achieved by using non-uniform baud lengths. With this method it is possible to increase sub-baud range-resolution of phase coded radar measurements while maintaining a narrow transmission bandwidth. We first derive target backscatter amplitude estimation error covariance matrix for arbitrary targets when estimating backscatter in amplitude domain. We define target optimality and discuss different search strategies that can be used to find well performing transmission envelopes. We give several simulated examples of the method showing that fractional baud-length coding results in smaller estimation errors than conventional uniform baud length transmission codes when estimating the target backscatter amplitude at sub-baud range resolution. We also demonstrate the method in practice by analyzing the range resolved power of a low-altitude meteor trail echo that was measured using a fractional baud-length experiment with the EISCAT UHF system.

  4. Cavity length below chute aerators

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    It is proved that air entrainment is one of the efficient measures dealing with cavi-tation control for the release works of hydropower projects. There are many factors to be considered in designing a chute aerator. One of the most important factors concerns the cavity length below the aerator,which has outstanding effects on air entrainment against cavitation damage. It is crucial to determine reasonable emergence angle for the calculation of the cavity length. In the present paper the overall effects of structural and hydraulic parameters on the emergence angle of the flow from the aerator were analyzed. Four improved expressions of the emer-gence angle with weight coefficient were investigated through experimental data of 68 points observed from 12 aerators of 6 hydropower projects,of both model and prototype,on the basis of error theory. A method to calculate the cavity length be-low aerators was suggested,which considers overall effects of the above men-tioned parameters. Comparison between the method in this paper and the other five methods of calculating the cavity length showed that the present method is much more reliable than the existing methods while the mean error of the method is less than others.

  5. Cavity length below chute aerators

    Institute of Scientific and Technical Information of China (English)

    WU JianHua; RUAN ShiPing

    2008-01-01

    It is proved that air entrainment is one of the efficient measures dealing with cavitation control for the release works of hydropower projects. There are many factors to be considered in designing a chute aerator. One of the most important factors concerns the cavity length below the aerator, which has outstanding effects on air entrainment against cavitation damage. It is crucial to determine reasonable emergence angle for the calculation of the cavity length. In the present paper the overall effects of structural and hydraulic parameters on the emergence angle of the flow from the aerator were analyzed. Four improved expressions of the emergence angle with weight coefficient were investigated through experimental data of 68 points observed from 12 aerators of 6 hydropower projects, of both model and prototype, on the basis of error theory. A method to calculate the cavity length below aerators was suggested, which considers overall effects of the above mentioned parameters. Comparison between the method in this paper and the other five methods of calculating the cavity length showed that the present method is much more reliable than the existing methods while the mean error of the method is less than others.

  6. Cyclic Codes of Length 2

    Indian Academy of Sciences (India)

    Manju Pruthi

    2001-11-01

    In this paper explicit expressions of + 1 idempotents in the ring $R = F_q[X]/\\langle X^{2^m}-1\\rangle$ are given. Cyclic codes of length 2 over the finite field , of odd characteristic, are defined in terms of their generator polynomials. The exact minimum distance and the dimension of the codes are obtained.

  7. Contamination of the environment by special purpose centrifuges used in clinical laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Harper, G.J.

    1981-10-01

    The generation of aerosols and the contamination of surfaces arising from the use of a number of special purpose centrifuges have been measured. Except when sealed containers were used all the equipment tested generated airborne particles and contaminated surrounding surfaces. The magnitude of this contamination was shown to be associated with several factors, and it could be considerably reduced by the use of sealed containers, and by fitting air filters. The significance of these findings and their application are discussed.

  8. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  9. Waterway Equipment - Boat, Barge, Motor

    Science.gov (United States)

    2012-09-25

    and service systems; deck and special machinery; and hoisting gear and equipment are operated and monitored throughout the entire test period...loaded statically to 200 percent of the ramp design hoist condition. This load is held for a minimum of three minutes. 4.6.6.2 Data Required...the contents fall short of filling a container. Wake The body of water that tends to follow a ship. It is set in motion by the friction with the

  10. Profitability Versus Construction Equipment Maintenance

    Science.gov (United States)

    2010-05-01

    E7(/(3+21(180%(5 ,QFOXGHDUHDFRGH XX-05-2010 Master’s Thesis DEC 2009 - MAY 2010 Profitability Versus Construction Equipment Maintenance...optimization of a perceived profit . This project recommends a decision support model that can be used by private and public entities alike to determine the...best fir acquisition method between rent-lease-buy and guidance for profitability optimization. Methods of life cycle cost estimating and decision

  11. [Equipment and technology in robotics].

    Science.gov (United States)

    Murphy, Declan; Challacombe, Ben; Nedas, Tim; Elhage, Oussama; Althoefer, Kaspar; Seneviratne, Lakmal; Dasgupta, Prokar

    2007-05-01

    We review the evolution and current status of robotic equipment and technology in urology. We also describe future developments in the key areas of virtual reality simulation, mechatronics and nanorobotics. The history of robotic technology is reviewed and put into the context of current systems. Experts in the associated fields of nanorobotics, mechatronics and virtual reality simulation simulation review the important future developments in these areas.

  12. Strategy Guideline: HVAC Equipment Sizing

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, A.

    2012-02-01

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  13. CERN computing equipment for Senegal

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On 26 May, CERN once again had the honour of donating computing equipment to a foreign institute.   This time, around 100 servers and five network hubs were sent to Senegal, making it the seventh country, after Morocco, Ghana, Bulgaria, Serbia, Egypt and the Philippines, to receive a donation of computing equipment from the Organization. The official ceremony was held at CERN on 26 May in the presence of the Director-General, Rolf Heuer, and Senegal's ambassador to Geneva, Fodé Seck, who both expressed their enthusiasm for the project. The equipment is intended for Cheikh Anta Diop University (UCAD) in Dakar and will be of particular use to students attending the African School of Fundamental Physics and its Applications (ASP 2014) taking place from 3 to 23 August, for which CERN is a partner. The ASP allows a large number of African students to hone their skills in high-energy physics and to forge professional links with fellow physicists in Africa and Europe. ...

  14. Data center equipment location and monitoring system

    DEFF Research Database (Denmark)

    2011-01-01

    , and runs a software application program that communicates with the equipment rack controllers. The software application program of the central control computer stores IDs of the equipment rack controllers and each of its connected electronic ID tags in a database.; The software application program......A data center equipment location system includes both hardware and software to provide for location, monitoring, security and identification of servers and other equipment in equipment racks. The system provides a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to a equipment rack controller on the equipment rack. The equipment rack controllers then link over a local area network to a central control computer. The central control computer provides an operator interface...

  15. JCE Online: Equipment Buyers Guide

    Science.gov (United States)

    Holmes, Jon L.

    1999-01-01

    The Equipment Buyers Guide was edited by Jo Rita Jordan. The new Equipment Buyers Guide, bound into the back of this issue, is also a new resource of JCE Internet. This resource provides an online source for the information contained in the printed guide. Placing this information online allows us to regularly update it and to provide live links to the suppliers' WWW sites. The organization of the online version parallels that of the print version. There is an alphabetical list of suppliers and a categorical listing. Links to these lists are provided on every page in the left-hand navigation bar. To quickly find information about a particular supplier, you click Supplier List, click the letter that begins the supplier's name, and scroll through the list to find the supplier. To find which suppliers provide a particular type of instrument or equipment, use the Categories link; click the category of the equipment you are looking for and then click the link to a supplier. You will then be taken to an alphabetical supplier listing page where you can scroll until you find the particular supplier of the item for which you are looking. Once you have found a supplier, the online Equipment Buyers Guide gives you the traditional contact information. But in addition, you also get one-click access to the WWW sites of the suppliers that have them. Depending on the site, you should be able to find information about the items that you seek and may even be able to order the items online! We think that you will find the online version of the Equipment Buyers Guide useful. To make it more useful, please send your suggestions, any errors or omissions you find, and any additional categories to the editor at jjordan@world.std.com The online Equipment Buyers Guide can be found at JCE Online at http://JChemEd.chem.wisc.edu/JCEWWW/Resources/EBG/ JCE Online in '99 JCE Online is your online source of "all things JCE". In order to provide you with an even more useful online resource, JCE

  16. Contaminated soil concrete blocks

    NARCIS (Netherlands)

    Korte, de A.C.J.; Brouwers, H.J.H.; Limbachiya, Mukesh C.; Kew, Hsein Y.

    2009-01-01

    According to Dutch law the contaminated soil needs to be remediated or immobilised. The main focus in this article is the design of concrete blocks, containing contaminated soil, that are suitable for large production, financial feasible and meets all technical and environmental requirements. In ord

  17. Contaminated water treatment

    Science.gov (United States)

    Gormly, Sherwin J. (Inventor); Flynn, Michael T. (Inventor)

    2010-01-01

    Method and system for processing of a liquid ("contaminant liquid") containing water and containing urine and/or other contaminants in a two step process. Urine, or a contaminated liquid similar to and/or containing urine and thus having a relatively high salt and urea content is passed through an activated carbon filter to provide a resulting liquid, to remove most of the organic molecules. The resulting liquid is passed through a semipermeable membrane from a membrane first side to a membrane second side, where a fortified drink having a lower water concentration (higher osmotic potential) than the resulting liquid is positioned. Osmotic pressure differential causes the water, but not most of the remaining inorganic (salts) contaminant(s) to pass through the membrane to the fortified drink. Optionally, the resulting liquid is allowed to precipitate additional organic molecules before passage through the membrane.

  18. Length of a Hanging Cable

    Directory of Open Access Journals (Sweden)

    Eric Costello

    2011-01-01

    Full Text Available The shape of a cable hanging under its own weight and uniform horizontal tension between two power poles is a catenary. The catenary is a curve which has an equation defined by a hyperbolic cosine function and a scaling factor. The scaling factor for power cables hanging under their own weight is equal to the horizontal tension on the cable divided by the weight of the cable. Both of these values are unknown for this problem. Newton's method was used to approximate the scaling factor and the arc length function to determine the length of the cable. A script was written using the Python programming language in order to quickly perform several iterations of Newton's method to get a good approximation for the scaling factor.

  19. INTERPOLATION WITH RESTRICTED ARC LENGTH

    Institute of Scientific and Technical Information of China (English)

    Petar Petrov

    2003-01-01

    For given data (ti,yi), I= 0,1,…,n,0 = t0 <t1 <…<tn = 1we study constrained interpolation problem of Favard type inf{‖f"‖∞|f∈W2∞[0,1],f(ti)=yi,i=0,…,n,l(f;[0,1])≤l0}, wherel(f";[0,1])=∫1 0 / 1+f'2(x)dx is the arc length off in [0,1]. We prove the existence of a solution f* of the above problem, that is a quadratic spline with a second derivative f"* , which coincides with one of the constants - ‖f"*‖∞,0,‖f"*‖∞ between every two consecutive knots. Thus, we extend a result ofKarlin concerning Favard problem, to the case of restricted length interpolation.

  20. Minimal Length, Measurability and Gravity

    Directory of Open Access Journals (Sweden)

    Alexander Shalyt-Margolin

    2016-03-01

    Full Text Available The present work is a continuation of the previous papers written by the author on the subject. In terms of the measurability (or measurable quantities notion introduced in a minimal length theory, first the consideration is given to a quantum theory in the momentum representation. The same terms are used to consider the Markov gravity model that here illustrates the general approach to studies of gravity in terms of measurable quantities.

  1. Detection of contaminant plumes released from landfills

    Science.gov (United States)

    Yenigül, N. B.; Hendsbergen, A. T.; Elfeki, A. M. M.; Dekking, F. M.

    2006-06-01

    Contaminant leaks released from landfills are a significant threat to groundwater quality. The groundwater detection monitoring systems installed in the vicinity of such facilities are vital. In this study the detection probability of a contaminant plume released from a landfill has been investigated by means of both a simulation and an analytical model for both homogeneous and heterogeneous aquifer conditions. The results of the two models are compared for homogeneous aquifer conditions to illustrate the errors that might be encountered with the simulation model. For heterogeneous aquifer conditions contaminant transport is modelled by an analytical model using effective (macro) dispersivities. The results of the analysis show that the simulation model gives the concentration values correctly over most of the plume length for homogeneous aquifer conditions, and that the detection probability of a contaminant plume at given monitoring well locations match quite well. For heterogeneous aquifer conditions the approximating analytical model based on effective (macro) dispersivities yields the average concentration distribution satisfactorily. However, it is insufficient in monitoring system design since the discrepancy between the detection probabilities of contaminant plumes at given monitoring well locations computed by the two models is significant, particularly with high dispersivity and heterogeneity.

  2. Minimizing microbial contamination of sperm samples

    Science.gov (United States)

    Jenkins, Jill A.; Tiersch, Terrence R.; Green, Christopher C.

    2011-01-01

    Taken from the Methods section: With the collection and translocation of gametes from aquatic species, a potential hazard exists for microbial transfer. Contamination of semen can occur during collection, processing, storage, and transport. Some preventative measures are described below for limiting the spread and amplification of microorganisms such as bacteria, viruses, fungi, mycoplasmas, and parasites. Generally, sanitation during collection is essential. Materials and equipment used to freeze semen should be sterile. Following good practice guidelines for handling and processing samples collected for freezing is especially important for non-domestic animals where disease-free status cannot be guaranteed and unsophisticated technology is used (Russell et al. 1977).

  3. Status of contamination monitoring in Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Begum, Aleya [Institute of Nuclear Science and Technology, Savar, Dacca (Bangladesh)

    1997-06-01

    The applications of radioisotopes and radiation sources to the research and development in medicine, food agriculture, industries and others are rapidly increasing in Bangladesh. The existing major nuclear facilites and allied laboratories of the country include 3 MW TRIGA Mark-2 research reactor for training, research and radioisotope production, 14 MeV neutron generator for nuclear data measurement and elemental analysis via neutron activation, 3 MeV Van de Graaff accelerator for the research and application of nuclear physics, and 50,000 Ci and 5,000 Ci Co-60 irradiators. About 10 Co-60 and Cs-137 teletherapy units are in operation in hospitals. The radioactive contamination of working areas, equipment, protective clothing and skin may result from normal operation and accidents, and contamination monitoring and decontamination are the essential part of radiation protection program. Surface contamination is monitored with Berthold survey meters. Hand and foot monitors have been used. Routine systematic search, continuous air monitoring, the examination of silt movement in Chittagong harbor using Sc-46 tracer and the measurement of tritium contamination for the neutron generator are reported. (K.I.)

  4. Electrical Ground Support Equipment Fabrication, Specification for

    Science.gov (United States)

    Denson, Erik C.

    2014-01-01

    This document specifies parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment (GSE) at the Kennedy Space Center (KSC).

  5. 40 CFR 265.32 - Required equipment.

    Science.gov (United States)

    2010-07-01

    ... equipment, or automatic sprinklers, or water spray systems. ... of equipment specified below: (a) An internal communications or alarm system capable of providing... assistance from local police departments, fire departments, or State or local emergency response teams;...

  6. Modernization of Deployable Airfield Debris Removal Equipment

    Science.gov (United States)

    2017-04-01

    measurements and to calculate volumes. A market survey of available loading and sweeping equipment was conducted to populate a database of physical...1 1.2 Objective and scope...Equipment ............................................................................................................................. 4 3 Market

  7. Proceedings of FED remote maintenance equipment workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sager, P.; Garin, J.; Hager, E.R.; Spampinato, P.T.; Tobias, D.; Young, N.

    1981-11-01

    A workshop was convened in two sessions in January and March 1981, on the remote maintenance equipment for the Fusion Engineering Device (FED). The objectives of the first session were to familiarize the participants with the status of the design of the FED and to develop a remote maintenance equipment list for the FED. The objective of the second session was to have the participants present design concepts for the equipment which had been identified in the first session. The equipment list was developed for general purpose and special purpose equipment. The general purpose equipment was categorized as manipulators and other, while the special purpose equipment was subdivided according to the reactor subsystem it serviced: electrical, magnetic, and nuclear. Both mobile and fixed base manipulators were identified. Handling machines were identified as the major requirement for special purpose equipment.

  8. Fitness Equipment Brings Business Opportunities

    Institute of Scientific and Technical Information of China (English)

    Lin Feng

    2011-01-01

    @@ Nowadays, as you walk in the domestic cities, color-ful and dynamic signs of gyms will always come into your view.And when you walk into the gym, you must first be greet-ed by rows of neatly stacked tread-mills.People running on the tread-mill, regardless of age, regardless of gender, can control their running speed all by themselves, with sports games playing in the monitor in the front of the equipment, and ears full of beautiful music from their iPods.

  9. First Magdas Equipment In Ecuador

    CERN Document Server

    López, Ericson; Vicente, Klever; Yumoto, K; Vasquez, N; Matsushita, H; Shishime, A; Vásconez, C

    2013-01-01

    The Magnetic Data Acquisition System (MAGDAS) was installed in the protected Jerusalem Park in Malchingui-Ecuador in October of 2012, under the joint collaboration between Kyushu University of Japan and the Quito Astronomical Observatory of the National Polytechnic School of Ecuador. In this paper, we describe the installation process and present the preliminary data obtained with the MAGDAS equipment. The behavior of the four components, D, H, Z and F allow us to see the importance of having the Ecuador station where the magnetic field has not been systematically measured before, in valuable contribution to study of the equatorial atmosphere.

  10. 46 CFR 154.1430 - Equipment locker.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Equipment locker. 154.1430 Section 154.1430 Shipping... Equipment § 154.1430 Equipment locker. One of each item of equipment under §§ 154.1400 and 154.1420 must be stowed in a marked locker: (a) On the open deck in or adjacent to the cargo area; or (b) In...

  11. Subsurface contaminants focus area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The US Department of Enregy (DOE) Subsurface Contaminants Focus Area is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater that exist throughout the DOE complex, including radionuclides, heavy metals; and dense non-aqueous phase liquids (DNAPLs). More than 5,700 known DOE groundwater plumes have contaminated over 600 billion gallons of water and 200 million cubic meters of soil. Migration of these plumes threatens local and regional water sources, and in some cases has already adversely impacted off-site rsources. In addition, the Subsurface Contaminants Focus Area is responsible for supplying technologies for the remediation of numerous landfills at DOE facilities. These landfills are estimated to contain over 3 million cubic meters of radioactive and hazardous buried Technology developed within this specialty area will provide efective methods to contain contaminant plumes and new or alternative technologies for development of in situ technologies to minimize waste disposal costs and potential worker exposure by treating plumes in place. While addressing contaminant plumes emanating from DOE landfills, the Subsurface Contaminants Focus Area is also working to develop new or alternative technologies for the in situ stabilization, and nonintrusive characterization of these disposal sites.

  12. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...

  13. 46 CFR 154.1005 - Equipment approval.

    Science.gov (United States)

    2010-10-01

    ... carried. (b) Each submerged cargo pump motor installation must be specially approved by the Commandant (CG... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Electrical § 154.1005 Equipment approval. (a) Electrical equipment that is required to be intrinsically safe...

  14. 46 CFR 28.880 - Hydraulic equipment.

    Science.gov (United States)

    2010-10-01

    ... hydraulic equipment and the adjacent work area. Protection shall be afforded to the operator of hydraulic... 46 Shipping 1 2010-10-01 2010-10-01 false Hydraulic equipment. 28.880 Section 28.880 Shipping... INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.880 Hydraulic equipment. (a) Each hydraulic system must...

  15. Recent R&D in Drilling Equipment

    Institute of Scientific and Technical Information of China (English)

    Sun Zuchen; Huang Zhiqian

    1997-01-01

    @@ Situation for Drilling Equipment Technical performance of drilling equipment and perfection of supporting systems hold the key to drilling safety, technical procedure development and drilling cost. In the end of the 1980s, the stituation for drilling equipment was not optimistic in China because of poor technical performance, low-level supporting system and scarcity of electric-driven rigs.

  16. New Trends in School Science Equipment.

    Science.gov (United States)

    Lowe, Norman K., Ed.

    This four-part volume examines trends, problems, and issues related to school science equipment. Part 1 focuses on laboratory work and practical activities in science and technology education, considering equipment and curriculum development, equipment development related to curricula in Brazil, uses of local resources for practical work,…

  17. 46 CFR 28.405 - Hydraulic equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Hydraulic equipment. 28.405 Section 28.405 Shipping... Operate With More Than 16 Individuals on Board § 28.405 Hydraulic equipment. (a) Each hydraulic system... than four times the system maximum operating pressure. (c) Each hydraulic system must be equipped...

  18. Used equipment-standard contract elements

    Institute of Scientific and Technical Information of China (English)

    Gary F. Alexander

    2004-01-01

    @@ One thing that both the purchase of new and used equipment has in common is the need for a comprehensive purchase agreement. The big difference is that while repetitive purchases of new equipment often only require the modification of one or more sections of a contract, every used equipment transaction and contract is normally different.

  19. Load Bearing Equipment for Bone and Muscle

    Science.gov (United States)

    Shackelford, Linda; Griffith, Bryan

    2015-01-01

    Resistance exercise on ISS has proven effective in maintaining bone mineral density and muscle mass. Exploration missions require exercise with similar high loads using equipment with less mass and volume and greater safety and reliability than resistance exercise equipment used on ISS (iRED, ARED, FWED). Load Bearing Equipment (LBE) uses each exercising person to create and control the load to the partner.

  20. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...

  1. 14 CFR 23.1415 - Ditching equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ditching equipment. 23.1415 Section 23.1415 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Ditching equipment. (a) Emergency flotation and signaling equipment required by any operating rule in...

  2. 46 CFR 121.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Heating equipment. 121.210 Section 121.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... SYSTEMS AND EQUIPMENT Cooking and Heating § 121.210 Heating equipment. (a) Each heater must be...

  3. 30 CFR 77.1914 - Electrical equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft...

  4. 38 CFR 21.216 - Special equipment.

    Science.gov (United States)

    2010-07-01

    ... which the veteran needs special equipment and is eligible for such equipment under other VA programs... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Special equipment. 21.216...) VOCATIONAL REHABILITATION AND EDUCATION Vocational Rehabilitation and Employment Under 38 U.S.C. Chapter...

  5. Proposal for the donation of LEP equipment

    CERN Document Server

    2000-01-01

    CERN has announced that LEP equipment will become available for donations to educational and scientific research institutes, to museums and public bodies in Member States and non-member States. A number of requests for a limited amount of equipment have been received. CERN has no further use for this equipment. The Finance Committee is invited to approve these donations.

  6. Material Handling Equipment Evaluation for Crater Repair

    Science.gov (United States)

    2016-11-01

    material handling equipment with a reduced logistical footprint for use by crater repair teams in airfield damage repair (ADR) scenarios. A market ...compared to currently utilized material handling equipment. This report presents the results of the market survey and equipment evaluations. Results...1 1.2 Objective and scope

  7. 29 CFR 1926.952 - Mechanical equipment.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.952 Mechanical equipment. (a) General. (1) Visual inspections shall be made of the equipment to determine that it... 29 Labor 8 2010-07-01 2010-07-01 false Mechanical equipment. 1926.952 Section 1926.952...

  8. Characterize Human Forward Contamination Project

    Science.gov (United States)

    Rucker, Michelle

    2015-01-01

    Let's face it: wherever we go, we will inevitably carry along the little critters that live in and on us. Conventional wisdom has long held that it's unlikely those critters could survive the space environment, but in 2007 microscopic animals called Tardigrades survived exposure to space and in 2008 Cyanobacteria lived for 548 days outside the International Space Station (ISS). But what about the organisms we might reasonably expect a crewed spacecraft to leak or vent? Do we even know what they are? How long might our tiny hitch-hikers survive in close proximity to a warm spacecraft that periodically leaks/vents water or oxygen-and how might they mutate with long-duration exposure? Unlike the Mars rovers that we cleaned once and sent on their way, crew members will provide a constantly regenerating contaminant source. Are we prepared to certify that we can meet forward contamination protocols as we search for life at new destinations? This project has four technical objectives: 1. TEST: Develop a test plan to leverage existing equipment (i.e. ISS) to characterize the kinds of organisms we can reasonably expect pressurized, crewed volumes to vent or leak overboard; as part of testing, we'll need to develop an Extravehicular Activity (EVA)-compatible tool that can withstand the pressure and temperature extremes of space, as well as collect, separate, and store multiple samples; 2. ANALYSIS: Develop an analysis plan to study those organisms in relevant destination environments, including spacecraft-induced conditions; 3. MODEL: Develop a modeling plan to model organism transport mechanisms in relevant destination environments; 4. SHARE: Develop a plan to disseminate findings and integrate recommendations into exploration requirements & ops. In short, we propose a system engineering approach to roadmap the necessary experiments, analysis, and modeling up front--rather than try to knit together disparate chunks of data into a sensible conclusion after the fact.

  9. Carbon Absorber Retrofit Equipment (CARE)

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Eric [Neumann Systems Group, Incorporated, Colorado Springs, CO (United States)

    2015-12-23

    During Project DE-FE0007528, CARE (Carbon Absorber Retrofit Equipment), Neumann Systems Group (NSG) designed, installed and tested a 0.5MW NeuStream® carbon dioxide (CO2) capture system using the patented NeuStream® absorber equipment and concentrated (6 molal) piperazine (PZ) as the solvent at Colorado Springs Utilities’ (CSU’s) Martin Drake pulverized coal (PC) power plant. The 36 month project included design, build and test phases. The 0.5MW NeuStream® CO2 capture system was successfully tested on flue gas from both coal and natural gas combustion sources and was shown to meet project objectives. Ninety percent CO2 removal was achieved with greater than 95% CO2product purity. The absorbers tested support a 90% reduction in absorber volume compared to packed towers and with an absorber parasitic power of less than 1% when configured for operation with a 550MW coal plant. The preliminary techno-economic analysis (TEA) performed by the Energy and Environmental Research Center (EERC) predicted an over-the-fence cost of $25.73/tonne of CO2 captured from a sub-critical PC plant.

  10. Liquid-Liquid Extraction Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Jack D. Law; Terry A. Todd

    2008-12-01

    Solvent extraction processing has demonstrated the ability to achieve high decontamination factors for uranium and plutonium while operating at high throughputs. Historical application of solvent extraction contacting equipment implies that for the HA cycle (primary separation of uranium and plutonium from fission products) the equipment of choice is pulse columns. This is likely due to relatively short residence times (as compared to mixer-settlers) and the ability of the columns to tolerate solids in the feed. Savannah River successfully operated the F-Canyon with centrifugal contactors in the HA cycle (which have shorter residence times than columns). All three contactors have been successfully deployed in uranium and plutonium purification cycles. Over the past 20 years, there has been significant development of centrifugal contactor designs and they have become very common for research and development applications. New reprocessing plants are being planned in Russia and China and the United States has done preliminary design studies on future reprocessing plants. The choice of contactors for all of these facilities is yet to be determined.

  11. Test Bed For Control Of Optical-Path Lengths

    Science.gov (United States)

    O'Neal, Michael C.; Eldred, Daniel D.; Liu, Dankai; Redding, David C.

    1994-01-01

    Truss structure and ancillary equipment constitute test bed for experiments in methods of controlling lengths of optical paths under conditions of structural vibration and deformation. Accommodates both passive and active methods of control. Experimental control system reduces millimeter-level disturbances in optical path length to nanometers. Developed for control, alignment, and aiming of distributed optical systems on large flexible structures. Test bed includes tower 2.5 meters high with two horizontal arms extending at right angles from its top. Rigidly mounted on massive steel block providing measure of isolation from ground vibrations. Optical motion-compensation system similar to one described previously in NASA Tech Briefs enclosed in flexure-mounted frame, called "trolley," at end of longer horizontal arm.

  12. International journal of food contamination

    National Research Council Canada - National Science Library

    2014-01-01

    The International Journal of Food Contamination publishes baseline, monitoring data, indicating the qualitative and quantitative presence of microbiological and chemical contaminants in foods, animal...

  13. Pharmacologically induced erect penile length and stretched penile length are both good predictors of post-inflatable prosthesis penile length.

    Science.gov (United States)

    Osterberg, E C; Maganty, A; Ramasamy, R; Eid, J F

    2014-01-01

    Inflatable penile prosthesis (IPP) remains the gold standard for the surgical treatment of refractory erectile dysfunction; however, current literature to aid surgeons on how best to counsel patients on their postoperative inflated penile length is lacking. The aim of this study was to identify preoperative parameters that could better predict postoperative penile length following insertion of an IPP. Twenty men were enrolled in a prospective study examining penile lengths before and after IPP surgery. Patients with Peyronie's disease were excluded from this analysis. Baseline preoperative characteristics, including body mass index, history of hypertension, diabetes, Sexual Health Inventory for Men scores and/or prior radical prostatectomy were recorded. All patients underwent implantation with a three-piece inflatable Coloplast penile prosthesis. We compared stretched penile length to pharmacologically induced erect lengths. Postoperatively, we measured inflated penile lengths at 6 weeks and assessed patients' perception of penile size at 12 weeks. The median (±interquartile range) stretched penile length and pharmacologically induced erect penile length was 15 (±3) and 14.25 (±2) cm, respectively (P=0.5). Median post-prosthesis penile length (13.5±2.13 cm) was smaller than preoperative pharmacologically induced length (P=0.02) and preoperative stretched penile length (P=0.01). The majority of patients (70%) had a decrease in penile length (median loss 0.5±1.5 cm); however, this loss was perceptible by 43% of men. Stretched penile length and pharmacologically induced erect penile length were equally good predictors of postoperative inflated length (Spearman's correlation 0.8 and 0.9, respectively). Pharmacologically induced erect penile length and stretched penile lengths are equal predictors of post-prosthesis penile length. The majority of men will experience some decrease in penile length following prosthesis implantation; however <50% report a

  14. Testing of Cotton Fiber Length

    Institute of Scientific and Technical Information of China (English)

    刘若华; 李汝勤

    2001-01-01

    To understand the influences of actual sampling conditions on cotton fiber length testing, this article presents a theoretic study on the distributions and fibrogram of the sample taken out by sampler from ideal sliver at a certain angle. From the distributions expression it can be found that the size of the sampler and the sampling angle are important factors which affect sampling, but if the sampling width is narrow enough, the influence of the sampling angle on the distributions and fibrogram is small enough to be omitted. This is an important conclusion for sampling, in light of this, some suggestions for designing new type sampler are put forward.

  15. Microwave sterilization of nitrous oxide nasal hoods contaminated with virus

    Energy Technology Data Exchange (ETDEWEB)

    Young, S.K.; Graves, D.C.; Rohrer, M.D.; Bulard, R.A.

    1985-12-01

    Although there exists a desire to eliminate the possibility of cross-infection from microbial contaminated nitrous oxide nasal hoods, effective and practical methods of sterilization in a dental office are unsatisfactory. Microwaves have been used to sterilize certain contaminated dental instruments without damage. In this study nasal hoods contaminated with rhinovirus, parainfluenza virus, adenovirus, and herpes simplex virus were sterilized in a modified microwave oven. Ninety-five percent of the virus activity was destroyed after 1 minute of exposure of the contaminated nasal hoods to microwaves. By the end of 4 minutes, complete inactivation of all four viruses was found. Repeated exposure of the nasal hoods to microwaves resulted in no damage to their texture and flexibility. Microwave sterilization may potentially provide a simple and practical method of sterilizing nitrous oxide anesthesia equipment in a dental or medical practice.

  16. Safety analysis report for packaging (onsite) decontaminated equipment self-container

    Energy Technology Data Exchange (ETDEWEB)

    Boehnke, W.M.

    1998-09-29

    The purpose of this Safety Analysis Report for Packaging (SARP) is to demonstrate that specific decontaminated equipment can be safely used as its own self-container. As a Decontaminated Equipment Self-Container (also referred to as a self-container), no other packaging, such as a burial box, would be required to transport the equipment onsite. The self-container will consist of a piece of equipment or apparatus which has all readily removable interior contamination removed, all of its external openings sealed, and all external surfaces decontaminated to less than 2000 dpm/100 cm for gamma-emitting radionuclides and less than 220 dpm/100 CM2 for alpha-emitting radionuclides.

  17. Equipment design guidelines for remote hot cell operations.

    Energy Technology Data Exchange (ETDEWEB)

    Wahlquist, D. R.

    1998-07-10

    Hot cells provide a unique and challenging environment for designing remotely operated equipment. A typical hot cell is an isolated room used to protect operators from highly contaminated and radioactive equipment. Hot cells usually have thick reinforced concrete walk and leaded glass windows. Operations within the hot cell are accomplished using master-slave manipulators and overhead crane or electro-mechanical manipulator systems. The inability to perform hands-on operation and maintenance in hot cells requires special design considerations. Some of these design considerations include operational interfaces, radiation, accessibility, replaceability/interchangeability, decontamination, atmospheric conditions, functionality, operator fatigue, and ease of use. This paper will discuss guidelines for designing hot cell remotely operated equipment that has been used successfully at Argonne National Laboratory. General topics in this paper will include master-slave manipulator types and limitations, overhead handling systems, viewing limitations, types and sizes of typical fasteners, hot cell compatible materials, mockup testing, guide features for mating parts, modularity, labeling, electrical fasteners, and lifting fixtures.

  18. Mechanical characteristics of base isolation systems for secondary equipment

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Y. S.; Kim, M. G.; Choi, I. G. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    This paper presents the results of experimental studies of the mechanical characteristics of base isolation systems for secondary equipment. The Friction Pendulum System (FPS), Natural Rubber Bearing (NRB) and High Damping Rubber Bearing (HDRB) were selected for the isolation systems. 400kg design loads were selected and 10 ton actuators are used in vertical and horizontal direction in this test. Finally, it is noted that the shape factor and damping characteristics of rubber bearing and length of curvature of the concave surface of FPS are the important factor of the isolation systems.

  19. Explosive Contamination from Substrate Surfaces: Differences and Similarities in Contamination Techniques Using RDX and C-4

    Science.gov (United States)

    Miller, C. J.; Yoder, T. S.

    2010-06-01

    Explosive trace detection equipment has been deployed to airports for more than a decade. During this time, the need for standardized procedures and calibrated trace amounts for ensuring that the systems are operating properly and detecting the correct explosive has been apparent but a standard representative of a fingerprint has been elusive. Standards are also necessary to evaluate instrumentation in the laboratories during development and prior to deployment to determine sample throughput, probability of detection, false positive/negative rates, ease of use by operator, mechanical and/or software problems that may be encountered, and other pertinent parameters that would result in the equipment being unusable during field operations. Since many laboratories do not have access to nor are allowed to handle explosives, the equipment is tested using techniques aimed at simulating the actual explosives fingerprint. This laboratory study focused on examining the similarities and differences in three different surface contamination techniques that are used to performance test explosive trace detection equipment in an attempt to determine how effective the techniques are at replicating actual field samples and to offer scenarios where each contamination technique is applicable. The three techniques used were dry transfer deposition of standard solutions using the Transportation Security Laboratory’s (TSL) patented dry transfer techniques (US patent 6470730), direct deposition of explosive standards onto substrates, and fingerprinting of actual explosives onto substrates. RDX was deposited on the surface of one of five substrates using one of the three different deposition techniques. The process was repeated for each substrate type using each contamination technique. The substrate types used were: 50% cotton/50% polyester as found in T-shirts, 100% cotton with a smooth surface such as that found in a cotton dress shirt, 100% cotton on a rough surface such as that

  20. Generalizations of Brandl's theorem on Engel length

    Science.gov (United States)

    Quek, S. G.; Wong, K. B.; Wong, P. C.

    2013-04-01

    Let n Engel cycle generated by g and h. The length of the Engel cycle is m-n. A group G is said to have Engel length r, if all the length of the Engel cycles in G divides r. In this paper we discuss the Brandl's theorem on Engel length and give some of its generalizations.

  1. The TDCPR Management Mode of Engineering Equipment

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The Three Gorges Project is a very large project, and its structure is very complex. International advanced engineering equipment is broadly used. The state of equipment running directly influences project building qualities and limited time. According to the factual conditions of the Three Gorges Project, the characteristics of engineering equipment are analyzed. At the same time, some theories about equipment management are induced, and the TDCPR management mode of engineering equipmeat of the Three Gorges Project is put forward in order to gain the aim of managing and using equipment well and speeding up the project construction.

  2. Contamination vs. Exposure

    Science.gov (United States)

    ... Issues Related to Polonium-210 Contamination in the United Kingdom Guidance for Public Health Departments and Clinicians Caring ... released into the environment can cause air, water, surfaces, soil, plants, buildings, people, or animals to become ...

  3. Contaminant Candidate List 3

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 3 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  4. Contaminant Candidate List 1

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 1 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  5. Contaminant Candidate List 2

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 2 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  6. Modeling for Airborne Contamination

    Energy Technology Data Exchange (ETDEWEB)

    F.R. Faillace; Y. Yuan

    2000-08-31

    The objective of Modeling for Airborne Contamination (referred to from now on as ''this report'') is to provide a documented methodology, along with supporting information, for estimating the release, transport, and assessment of dose to workers from airborne radioactive contaminants within the Monitored Geologic Repository (MGR) subsurface during the pre-closure period. Specifically, this report provides engineers and scientists with methodologies for estimating how concentrations of contaminants might be distributed in the air and on the drift surfaces if released from waste packages inside the repository. This report also provides dose conversion factors for inhalation, air submersion, and ground exposure pathways used to derive doses to potentially exposed subsurface workers. The scope of this report is limited to radiological contaminants (particulate, volatile and gaseous) resulting from waste package leaks (if any) and surface contamination and their transport processes. Neutron activation of air, dust in the air and the rock walls of the drift during the preclosure time is not considered within the scope of this report. Any neutrons causing such activation are not themselves considered to be ''contaminants'' released from the waste package. This report: (1) Documents mathematical models and model parameters for evaluating airborne contaminant transport within the MGR subsurface; and (2) Provides tables of dose conversion factors for inhalation, air submersion, and ground exposure pathways for important radionuclides. The dose conversion factors for air submersion and ground exposure pathways are further limited to drift diameters of 7.62 m and 5.5 m, corresponding to the main and emplacement drifts, respectively. If the final repository design significantly deviates from these drift dimensions, the results in this report may require revision. The dose conversion factors are further derived by using concrete of

  7. DECISION ANALYSIS SCIENCE MODELING FOR APPLICATION AND FIELDING SELECTION APPLIED TO EQUIPMENT DISMANTLEMENT TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D&D process. There are an estimated 1,200 buildings in the DOE-EM complex that will require the dismantlement of equipment and various metal structures. As buildings undergo the D&D process, this metallic equipment contaminated with radionuclides such as uranium and plutonium must be size-reduced before final disposal. A single information source comparing dismantlement technologies in the areas of safety, cost, and performance is needed by DOE managers and is not currently available. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D&D project costs. The purpose of this investigation was to evaluate commercially available and innovative technologies for equipment dismantlement and provide a comprehensive source of information to the D&D community in the areas of technology performance, cost, and health and safety.

  8. Contaminants in Otter, Mink and Marten in British Colombia

    Directory of Open Access Journals (Sweden)

    Harding L.

    1999-10-01

    Full Text Available As a continuation of studies of mustelids on the Columbia and Fraser River systems in north-western North America, chlorinated hydrocarbon and trace metal contamination of mink, marten and river otter were assessed in relation to physiological and reproductive measures of condition. Mink, marten and river otter were collected during the winters 1994/95 and 1995/96 from commercial trappers. Necropsies included evaluation of the following biological parameters: sex, body mass and length, age, thymus, heart, liver, lung, spleen, pancreas, kidney, gonad, omentum, adrenal gland and baculum (in males masses, baculum length, and stomach contents. Livers were analysed, individually or in pools, for residues of organochlorine (OC pesticides, polychlorinated biphenyls (PCBs, dibenzo-p-dioxins (PCDDs and dibenzofurans (PCDFs. Contamination levels were relatively low compared to those documented in other North American populations, although they ranged higher than those detected during an earlier survey (1990-92 of these regional populations. Nutritional condition varied slightly amongst collection regions, but showed no relationships with contaminant burdens. Specifically, mink from the upper Fraser River appeared to have less fat stores (evaluated by stomach contents and omentum mass, but also showed some of the lowest OC contamination levels observed. Similarly, a few individuals with enlarged livers and kidneys had unremarkable contamination profiles. Although a few individuals with gross abnormalities of reproductive systems did not show high levels of contamination, there was a significant negative correlation between Aroclor 1260 concentrations and baculum length in juvenile mink. The influence of baculum length on reproductive success is unknown, but given similar associations found in juvenile otter from Oregon, the incidence of smaller baculum size and its influence on reproduction needs to be further characterized in a larger subset of these

  9. Heat recovery equipment for engines

    Energy Technology Data Exchange (ETDEWEB)

    Segaser, C.L.

    1977-04-01

    The recovery and use of waste heat from prime movers is an important consideration for evaluating an on-site power system, since it is the basic factor that makes possible a substantial increase in fuel-use efficiency. The equipment usually employed to recover waste heat can be categorized as: (a) shell-and-tube type heat exchangers, (b) radiator-type heat exchangers, (c) exhaust gas boilers for the generation of pressurized hot water and/or steam, (d) steam separators, and (e) combined packaged units for ebulliently cooled internal combustion piston engines. The functional requirements and cost considerations involved in applying these devices for the recovery of waste heat from various types of prime-movers considered for application in the ICES Systems Engineering Program are examined.

  10. Antenna Calibration and Measurement Equipment

    Science.gov (United States)

    Rochblatt, David J.; Cortes, Manuel Vazquez

    2012-01-01

    A document describes the Antenna Calibration & Measurement Equipment (ACME) system that will provide the Deep Space Network (DSN) with instrumentation enabling a trained RF engineer at each complex to perform antenna calibration measurements and to generate antenna calibration data. This data includes continuous-scan auto-bore-based data acquisition with all-sky data gathering in support of 4th order pointing model generation requirements. Other data includes antenna subreflector focus, system noise temperature and tipping curves, antenna efficiency, reports system linearity, and instrument calibration. The ACME system design is based on the on-the-fly (OTF) mapping technique and architecture. ACME has contributed to the improved RF performance of the DSN by approximately a factor of two. It improved the pointing performances of the DSN antennas and productivity of its personnel and calibration engineers.

  11. Air cleaning issues with contaminated sites

    Energy Technology Data Exchange (ETDEWEB)

    Bellamy, R.R. [Nuclear Regulatory Commission, King of Prussia, PA (United States)

    1997-08-01

    The US Nuclear Regulatory Commission has developed a list of contaminated sites that warrant special USNRC attention because they pose unique or complex decommissioning issues. This list of radiologically contaminated sites is termed the Site Decommissioning Management Plan (SDMP), and was first issued in 1990. A site is placed on the SDMP list if it has; (1) Problems with the viability of the responsible organization (e.g., the licensee for the site is unable or unwilling to pay for the decommissioning); (2) Large amounts of soil contamination or unused settling ponds or burial grounds that may make the waste difficult to dispose of; (3) The long-term presence of contaminated, unused buildings; (4) A previously terminated license; or (5) Contaminated or potential contamination of the ground water from on-site wastes. In deciding whether to add a site to the SDMP list, the NRC also considers the projected length of time for decommissioning and the willingness of the responsible organization to complete the decommissioning in a timely manner. Since the list was established, 9 sites have been removed from the list, and the current SDMP list contains 47 sites in 11 states. The USNRC annually publishes NUREG-1444, {open_quotes}Site Decommissioning Management Plan{close_quotes}, which updates the status of each site. This paper will discuss the philosophical goals of the SDMP, then will concentrate on the regulatory requirements associated with air cleaning issues at the SDMP sites during characterization and remediation. Both effluent and worker protection issues will be discussed. For effluents, the source terms at sites will be characterized, and measurement techniques will be presented. Off-site dose impacts will be included. For worker protection issues, air sampling analyses will be presented in order to show how the workers are adequately protected and their doses measured to satisfy regulatory criteria during decontamination operations. 1 tab.

  12. A baseline assessment of beach debris and tar contamination in Bonaire, Southeastern Caribbean

    NARCIS (Netherlands)

    Debrot, A.O.; Rijn, van J.; Bron, P.S.; Leon, R.

    2013-01-01

    Data on beach debris and tar contamination is provided for 21 natural beach sites in Bonaire, Southeastern Caribbean. Transects amounting to a combined length of 991 m were sampled March–May 2011 and a total of 8960 debris items were collected. Highest debris and tar contamination were found on the

  13. Contamination Control for Thermal Engineers

    Science.gov (United States)

    Rivera, Rachel B.

    2015-01-01

    The presentation will be given at the 26th Annual Thermal Fluids Analysis Workshop (TFAWS 2015) hosted by the Goddard Spaceflight Center (GSFC) Thermal Engineering Branch (Code 545). This course will cover the basics of Contamination Control, including contamination control related failures, the effects of contamination on Flight Hardware, what contamination requirements translate to, design methodology, and implementing contamination control into Integration, Testing and Launch.

  14. Lead-210 contamination

    Energy Technology Data Exchange (ETDEWEB)

    Gray, P. [Peter Gray and Associates, Tulsa, OK (United States)

    1997-12-31

    Nearly all scrap dealers, smelters and other recyclers routinely monitor for radioactivity in shipments entering their facility. These sensitive radiation gate monitors easily detect radium-226 and most other radioactive nuclides. However, the type of detector normally used, sodium iodide scintillation crystals, will not detect the low energy gamma radiation emitted by lead-210 and its progeny. Since lead-210 is a common radioactive contaminant in certain industries, contaminated scrap metal from these industries may avoid detection at the recycler. Lead-210 is a decay product of radon-222 which is produced in small concentrations with natural gas. As the natural gas liquids, particularly ethane and propane, are separated from the natural gas, the radon concentrates in the ethane/propane fraction. The natural gas industry, particularly gas processing facilities and industries using ethane and propane as feed stocks can be significantly contaminated with the radon decay products, especially lead-210, bismuth-210 and polonium-210. Unless the scrap metal is decontaminated before sending to the recycler, the lead-210 contaminated scrap may be processed, resulting in some degree of radioactive contamination of the recycling facilities. Methods of detecting the low energy gamma radiation associated with lead-210 include the pancake G-M detector and the thin crystal-thin window scintillation detector.

  15. Mine railway equipments management information system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, X.; Han, K.; Duan, T.; Liu, Z.; Lu, H. [China University of Mining and Technology, Xuzhou (China)

    2007-06-15

    Based on client/server and browser/server models, the management information system described realized the entire life-cycle management of mine railway equipment which included universal equipment and special equipment in the locomotive depot, track maintenance division, electrical depot and car depot. The system has other online functions such as transmitting reports, graphics management, statistics, searches, graphics wizard and web propaganda. It was applied in Pingdingshan Coal Co. Ltd.'s Railway Transport Department. 5 refs., 4 figs.

  16. Surface contamination analysis technology team overview

    Science.gov (United States)

    Burns, H. Dewitt

    1995-01-01

    A team was established which consisted of representatives from NASA (Marshall Space Flight Center and Langley Research Center), Thiokol Corporation, the University of Alabama in Huntsville, AC Engineering, SAIC, Martin Marietta, and Aerojet. The team's purpose was to bring together the appropriate personnel to determine what surface inspection techniques were applicable to multiprogram bonding surface cleanliness inspection. In order to identify appropriate techniques and their sensitivity to various contaminant families, calibration standards were developed. Producing standards included development of consistent low level contamination application techniques. Oxidation was also considered for effect on inspection equipment response. Ellipsometry was used for oxidation characterization. Verification testing was then accomplished to show that selected inspection techniques could detect subject contaminants at levels found to be detrimental to critical bond systems of interest. Once feasibility of identified techniques was shown, selected techniques and instrumentation could then be incorporated into a multipurpose inspection head and integrated with a robot for critical surface inspection. Inspection techniques currently being evaluated include optically stimulated electron emission (OSEE); near infrared (NIR) spectroscopy utilizing fiber optics; Fourier transform infrared (FTIR) spectroscopy; and ultraviolet (UV) fluorescence. Current plans are to demonstrate an integrated system in MSFC's Productivity Enhancement Complex within five years from initiation of this effort in 1992 assuming appropriate funding levels are maintained. This paper gives an overview of work accomplished by the team and future plans.

  17. Integrated Control Sytems of Mycotoxin Contamination

    Directory of Open Access Journals (Sweden)

    Name\tRomsyah

    2006-03-01

    Full Text Available Contamination of mycotoxins produced by Aspergillus spp., Fusarium spp . and Penicillium s pp . i n agricultural products has been a concern regarding their effect to health and economic impact. Integrated control system should be based on Hazard Analysis and Critical Control Point (HACCP approach involving Good Agricultural Practices (GAP and Good Manufacturing Practices (GMP . Prevention should be carried out through pre harvest, harvest, post harvest, as well as control quality at all stages of production. Pre harvest control is conducted through the selection of resistant varieties, insect control and weeds management mechanically or applying fungicides and herbicides, plant rotation, irrigation and soil management, as well as biological control . Harvesting at the right time using clean equipments from fungal contamination and insect infestation avoids the contamination of mycotoxins . Post harvest control by physical selection, washing and dilution, drying, storage, application of chemicals and binding agents, natural products, nutrients and vitamins, microbiological control, heating and radiation could also minimize mycotoxin in food and feed . Although chemicals can effectively reduce mycotoxin, the use of those on food/feed should be considered the safety . The addition of natural products, nutrition supplements and vitamins suppress the negative effect of mycotoxin on animals . The use of non-toxigenic fungi and other microbes as biological control is the effective and safe methods for food/feed . The implementation of integrated mycotoxin control system by utilizing the HACCP concept would meet the qualified and safe food/feed products .

  18. Export of electronics equipment waste.

    Science.gov (United States)

    LaDou, Joseph; Lovegrove, Sandra

    2008-01-01

    Electronics equipment waste ("e-waste") includes discarded computers, computer monitors, television sets, and cell phones. Less than 10% of e-waste is currently recycled. The United States and other developed countries export e-waste primarily to Asia, knowing it carries a real harm to the poor communities where it will be discarded. A 2006 directive bans the use of lead, mercury, cadmium, hexavalent chromium, and certain brominated flame retardants in most electronics products sold in the EU. A similar directive facilitates the development and design of clean electronics products with longer lifespans that are safe and easy to repair, upgrade, and recycle, and will not expose workers and the environment to hazardous chemicals. These useful approaches apply only regionally and cover only a fraction of the hazardous substances used in electronics manufacture, however. There is an urgent need for manufacturers of electronics products to take responsibility for their products from production to end-of-life, and for much tighter controls both on the transboundary movement of e-waste and on the manner in which it is recycled. Manufacturers must develop clean products with longer lifespans that are safe and easy to repair, upgrade, and recycle and will not expose workers and the environment to hazardous chemicals.

  19. ISS qualified thermal carrier equipment

    Science.gov (United States)

    Deuser, Mark S.; Vellinger, John C.; Jennings, Wm. M.

    2000-01-01

    Biotechnology is undergoing a period of rapid and sustained growth, a trend which is expected to continue as the general population ages and as new medical treatments and products are conceived. As pharmaceutical and biomedical companies continue to search for improved methods of production and, for answers to basic research questions, they will seek out new avenues of research. Space processing on the International Space Station (ISS) offers such an opportunity! Space is rapidly becoming an industrial laboratory for biotechnology research and processing. Space bioprocessing offers exciting possibilities for developing new pharmaceuticals and medical treatments, which can be used to benefit mankind on Earth. It also represents a new economic frontier for the private sector. For over eight years, the thermal carrier development team at SHOT has been working with government and commercial sector scientists who are conducting microgravity experiments that require thermal control. SHOT realized several years ago that the hardware currently being used for microgravity thermal control was becoming obsolete. It is likely that the government, academic, and industrial bioscience community members could utilize SHOT's hardware as a replacement to their current microgravity thermal carrier equipment. Moreover, SHOT is aware of several international scientists interested in utilizing our space qualified thermal carrier. SHOT's economic financing concept could be extremely beneficial to the international participant, while providing a source of geographic return for their particular region. Beginning in 2000, flight qualified thermal carriers are expected to be available to both the private and government sectors. .

  20. Radiation Monitoring Equipment Dosimeter Experiment

    Science.gov (United States)

    Hardy, Kenneth A.; Golightly, Michael J.; Quam, William

    1992-01-01

    Spacecraft crews risk exposure to relatively high levels of ionizing radiation. This radiation may come from charged particles trapped in the Earth's magnetic fields, charged particles released by solar flare activity, galactic cosmic radiation, energetic photons and neutrons generated by interaction of these primary radiations with spacecraft and crew, and man-made sources (e.g., nuclear power generators). As missions are directed to higher radiation level orbits, viz., higher altitudes and inclinations, longer durations, and increased flight frequency, radiation exposure could well become a major factor for crew stay time and career lengths. To more accurately define the radiological exposure and risk to the crew, real-time radiation monitoring instrumentation, which is capable of identifying and measuring the various radiation components, must be flown. This presentation describes a radiation dosimeter instrument which was successfully flown on the Space Shuttle, the RME-3.

  1. Environmental Contaminants in Foodstuffs

    Directory of Open Access Journals (Sweden)

    Mária Túri-Szerletics

    2008-06-01

    Full Text Available Consumers have specific concerns about food contaminants but often lack themeans to make appropriate judgements on what is high risk and what is not. Contaminantsin foods can be grouped according to their origin and nature. Environmental contaminantsof food-safety concern includes toxic metals and elements, organometallic compounds,agricultural chemicals and persistent organic pollutants such as halogenated hydrocarbonpesticides, polychlorinated biphenyls, dioxins, polycyclic aromatic hydrocarbons,phthalates, nirates, nitrites. These contaminants may present a potential hazard for humanhealth if exposure exceeds tolerable levels. This article shows the characteristics and thedietary intake of these elements and compounds. Further works need to concentrate onmechanism of different contaminants toxicity and metabolism, reevaluation of acceptablelimits, and their control in foods and in the environment.

  2. Microbial Contamination of Ice Machines Is Mediated by Activated Charcoal Filtration Systems in a City Hospital.

    Science.gov (United States)

    Yorioka, Katsuhiro; Oie, Shigeharu; Hayashi, Koji; Kimoto, Hiroo; Furukawa, Hiroyuki

    2016-06-01

    Although microbial contamination of ice machines has been reported, no previous study has addressed microbial contamination of ice produced by machines equipped with activated charcoal (AC) filters in hospitals. The aim of this study was to provide clinical data for evaluating AC filters to prevent microbial contamination of ice. We compared microbial contamination in ice samples produced by machines with (n = 20) and without an AC filter (n = 40) in Shunan City Shinnanyo Municipal Hospital. All samples from the ice machine equipped with an AC filter contained 10-116 CFUs/g of glucose nonfermenting gram-negative bacteria such as Pseudomonas aeruginosa and Chryseobacterium meningosepticum. No microorganisms were detected in samples from ice machines without AC filters. After the AC filter was removed from the ice machine that tested positive for Gram-negative bacteria, the ice was resampled (n = 20). Analysis found no contaminants. Ice machines equipped with AC filters pose a serious risk factor for ice contamination. New filter-use guidelines and regulations on bacterial detection limits to prevent contamination of ice in healthcare facilities are necessary.

  3. Characterisation of NORM Contaminated Objects: Reliable and Efficient

    DEFF Research Database (Denmark)

    Breddam, Kresten; Hou, Xiaolin; Koufakis, Markos

    The predominant contributors to the production of Technologically En-hanced Naturally Occurring Radioactive Material (TENORM) and NORM-waste in the Nordic countries are the on- and offshore oil and gas produc-ers. In oil and gas production processes, host rock formation water con-taining low...... concentrations of NORM is mixed with seawater containing high concentrations of sulphate. This leads to precipitation of NORM (Ra, Pb, Po)SO4, which is deposited as either scale or sludge in the production equipment. NORM contaminated pipes, tubes, pumps and tanks, etc. are therefore subject to radiological...... characterization in order to ensure safe reuse or recycling as well as safe NORM waste handling.The procedures and measurement techniques may significantly affect the amount of mate-rial that is categorized as NORM contaminated equipment and NORM waste. At present, different procedures are used for categorization...

  4. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  5. Detection of Equipment Faults Before Beam Loss

    CERN Document Server

    Galambos, J.

    2016-01-01

    High-power hadron accelerators have strict limits on fractional beam loss. In principle, once a high-quality beam is set up in an acceptable state, beam loss should remain steady. However, in practice, there are many trips in operational machines, owing to excessive beam loss. This paper deals with monitoring equipment health to identify precursor signals that indicate an issue with equipment that will lead to unacceptable beam loss. To this end, a variety of equipment and beam signal measurements are described. In particular, several operational examples from the Spallation Neutron Source (SNS) of deteriorating equipment functionality leading to beam loss are reported.

  6. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  7. An Analysis Pattern for Equipment Management

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In this paper, we account for this subject: how to de sign a pattern, it can track the state of the equipment of some organizations su ch as enterprise, organ, laboratory, school etc. We present an analysis pattern, which describes the whole procedure of managing the equipment and record the us ing of the equipment. It not only can track the quantity and location of the equ ipment of the whole organization, the more important is it can update the state of the equipment at real-time automatically. First,...

  8. Process Equipment Cost Estimation, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Loh, H. P. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Lyons, Jennifer [EG& G Technical Services, Inc., Morgantown, WV (United States); White, Charles W. [EG& G Technical Services, Inc., Morgantown, WV (United States)

    2002-01-01

    This report presents generic cost curves for several equipment types generated using ICARUS Process Evaluator. The curves give Purchased Equipment Cost as a function of a capacity variable. This work was performed to assist NETL engineers and scientists in performing rapid, order of magnitude level cost estimates or as an aid in evaluating the reasonableness of cost estimates submitted with proposed systems studies or proposals for new processes. The specific equipment types contained in this report were selected to represent a relatively comprehensive set of conventional chemical process equipment types.

  9. The relationships of the process/reactive, paranoid/nonparanoid, length of illness, and length of hospitalization dimensions to schizophrenic abstract thinking deficits.

    Science.gov (United States)

    Watson, C G

    1976-11-01

    Attempts to determine whether the quality of schizophrenic thought disorder varies from one type of schizophrenic to another in earlier studies have been hindered by the contamination of the major individual difference dimensions with each other. In the project described here, partial correlations were run between each of two abstraction deficit measures (Proverbs Test Abstract Level and Autism scores) and four independent variables which represent dimensions commonly used as criteria in individual differences research in schizophrenia--Ullmann-Giovannoni Process-Reactive scores, the MMPI Paranoia Scale, length of illness, and length of hospitalization. In each correlation the three noncriterion individual difference measures, the unused abstraction measure, age, education, and WAIS Vocabulary were partialed out. The correlations were also corrected for attenuation. After partialing, level of abstraction was negatively correlated with processness. Autism was positively related to reactiveness and length of hospitalization. Neither of two paranoid/nonparanoid measures used nor length of illness was related to either dependent variable.

  10. Contamination Analysis Tools

    Science.gov (United States)

    Brieda, Lubos

    2015-01-01

    This talk presents 3 different tools developed recently for contamination analysis:HTML QCM analyzer: runs in a web browser, and allows for data analysis of QCM log filesJava RGA extractor: can load in multiple SRS.ana files and extract pressure vs. time dataC++ Contamination Simulation code: 3D particle tracing code for modeling transport of dust particulates and molecules. Uses residence time to determine if molecules stick. Particulates can be sampled from IEST-STD-1246 and be accelerated by aerodynamic forces.

  11. Groundwater contamination in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Tase, Norio [Univ. of Tsukuba, Ibaraki (Japan)

    1992-07-01

    Problems on groundwater contamination in Japan are briefly summarized in this paper. Although normal physical conditions in Japan restrict the possibilities of groundwater contamination, human activities are threatening groundwater resources. A survey by the Environment Agency of Japan showed nationwide spreading of organic substances, such as trichloroethylene as well as nitrogen compounds. Synthetic detergents have also been detected even in rural areas and in deep confined aquifers, although their concentrations are not as high. Public awareness of agrichemical or pesticides abuse, especially from golf courses, is apparent. Other problems such as nitrate-nitrogen, leachate from landfills, and the leaking of underground storage tanks are also discussed. 9 refs., 3 figs., 4 tabs.

  12. Groundwater contamination in Japan

    Science.gov (United States)

    Tase, Norio

    1992-07-01

    Problems on groundwater contamination in Japan are briefly summarized in this paper. Although normal physical conditions in Japan restrict the possibilities of groundwater contamination, human activities are threatening groundwater resources. A survey by the Environment Agency of Japan showed nationwide spreading of organic substances, such as trichloroethylene as well as nitrogen compounds. Synthetic detergents have also been detected even in rural areas and in deep confined aquifers, although their concentrations are not as high. Public awareness of agrichemical or pesticides abuse, especially from golf courses, is apparent. Other problems such as nitrate-nitrogen, leachate from landfills, and the leaking of underground storage tanks are also discussed.

  13. Information, polarization and term length in democracy

    DEFF Research Database (Denmark)

    Schultz, Christian

    2008-01-01

    This paper considers term lengths in a representative democracy where the political issue divides the population on the left-right scale. Parties are ideologically different and better informed about the consequences of policies than voters are. A short term length makes the government more accou...... the uncertainty is large and parties are not very polarized. Partisan voters always prefer a long term length. When politicians learn while in office a long term length becomes more attractive for swing voters....

  14. A Structure Innovation on the Loading/Unloading Equipment for MSW Container

    Institute of Scientific and Technical Information of China (English)

    YANG Xianhai; LV Chuanyi

    2006-01-01

    A structure innovation on the loading/unloading equipment for MSW (municipal solid waste) container was designed. By disposing chain transmission perpendicularly, the loading/unloading equipment for MSW container was developed by linear movement part of the chain transmission. Effect of transmission mechanism on the motion stability of chain transmission was discussed. The relation between chain sag, chain length and chain pitch numbers was studied, and the calculation equation of chain sag by perpendicularly disposing chain transmission was deduced. The relation curve between allowed abrasion ratio and pitch numbers of chain was studied, the reason for tooth-leap was analyzed, and new equipment of preventing tooth-leap was put forward. Loading/unloading devices equipped with new transmission mechanism have been made into products, and this structure innovation has been applied in practice largely. It made considerable economic and social benefit.

  15. Decontamination of multiple casualties who are chemically contaminated: a challenge for acute hospitals.

    Science.gov (United States)

    Clarke, Simon F J; Chilcott, Rob P; Wilson, James C; Kamanyire, Robie; Baker, David J; Hallett, Anthony

    2008-01-01

    Patients who have been contaminated by chemical compounds present a number of difficulties to emergency departments, in particular, the risk of secondary contamination of healthcare staff and facilities. The Department of Health in the United Kingdom has provided equipment to decontaminate chemically contaminated casualties who present at emergency departments. The capacity of this equipment is limited, and although both the ambulance and fire services have equipment to cope with mass casualties at the scene of a chemical incident, there is still the possibility that acute hospitals will be overwhelmed by large numbers of self-presenting patients. The risks and potential consequences of this gap in resilience are discussed and a number of possible practical solutions are proposed.

  16. 28 CFR 551.4 - Hair length.

    Science.gov (United States)

    2010-07-01

    ... to an inmate hair care services which comply with applicable health and sanitation requirements. ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Hair length. 551.4 Section 551.4 Judicial... Hair length. (a) The Warden may not restrict hair length if the inmate keeps it neat and clean. (b)...

  17. String matching with variable length gaps

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li; Vildhøj, Hjalte Wedel

    2012-01-01

    We consider string matching with variable length gaps. Given a string T and a pattern P consisting of strings separated by variable length gaps (arbitrary strings of length in a specified range), the problem is to find all ending positions of substrings in T that match P. This problem is a basic...

  18. Lunar construction/mining equipment

    Science.gov (United States)

    Ozdemir, Levent

    1990-01-01

    For centuries, mining has utilized drill and blast as the primary method of rock excavation. Although this technique has undergone significant improvements, it still remains a cyclic, labor intensive operation with inherent safety hazards. Other drawbacks include damage to the surrounding ground, creation of blast vibrations, rough excavation walls resulting in increased ventilation requirements, and the lack of selective mining ability. Perhaps the most important shortcoming of drill and blast is that it is not conducive to full implementation of automation or robotics technologies. Numerous attempts have been made in the past to automate drill and blast operations to remove personnel from the hazardous work environment. Although most of the concepts devised look promising on paper, none of them was found workable on a sustained production basis. In particular, the problem of serious damage to equipment during the blasting cycle could not be resolved regardless of the amount of charge used in excavation. Since drill and blast is not capable of meeting the requirements of a fully automated rock fragmentation method, its role is bound to gradually decrease. Mechanical excavation, in contrast, is highly suitable to automation because it is a continuous process and does not involve any explosives. Many of the basic principles and trends controlling the design of an earth-based mechanical excavator will hold in an extraterrestrial environment such as on the lunar surface. However, the economic and physical limitations for transporting materials to space will require major rethinking of these machines. In concept, then, a lunar mechanical excavator will look and perform significantly different from one designed for use here on earth. This viewgraph presentation gives an overview of such mechanical excavator systems.

  19. A wide angle low coherence interferometry based eye length optometer

    Science.gov (United States)

    Meadway, Alexander; Siegwart, John; Wildsoet, Christine; Norton, Thomas; Zhang, Yuhua

    2015-03-01

    Interest in eye growth regulation has burgeoned with the rise in myopia prevalence world-wide. Eye length and eye shape are fundamental metrics for related research, but current in vivo measurement techniques are generally limited to the optical axis of the eye. We describe a high resolution, time domain low coherence interferometry based optometer for measuring the eye length of small animals over a wide field of view. The system is based upon a Michelson interferometer using a superluminescent diode as a source, including a sample arm and a reference arm. The sample arm is split into two paths by a polarisation beam splitter; one focuses the light on the cornea and the other focuses the light on the retina. This method has a high efficiency of detection for reflections from both surfaces. The reference arm contains a custom high speed linear motor with 25 mm stroke and equipped with a precision displacement encoder. Light reflected from the cornea and the retina is combined with the reference beam to generate low coherence interferograms. Two galvo scanners are employed to steer the light to different angles so that the eye length over a field of view of 20° × 20° can be measured. The system has an axial resolution of 6.8 μm (in air) and the motor provides accurate movement, allowing for precise and repeatable measurement of coherence peak positions. Example scans from a tree shrew are presented.

  20. Mercury contamination extraction

    Science.gov (United States)

    Fuhrmann, Mark; Heiser, John; Kalb, Paul

    2009-09-15

    Mercury is removed from contaminated waste by firstly applying a sulfur reagent to the waste. Mercury in the waste is then permitted to migrate to the reagent and is stabilized in a mercury sulfide compound. The stable compound may then be removed from the waste which itself remains in situ following mercury removal therefrom.

  1. DSCOVR Contamination Lessons Learned

    Science.gov (United States)

    Graziani, Larissa

    2015-01-01

    The Triana observatory was built at NASA GSFC in the late 1990's, then placed into storage. After approximately ten years it was removed from storage and repurposed as the Deep Space Climate Observatory (DSCOVR). This presentation outlines the contamination control program lessons learned during the integration, test and launch of DSCOVR.

  2. Practices and conditions which promote persistence of Listeria monocytogenes on equipment surfaces and transfer to cantaloupes in the packing environment

    Science.gov (United States)

    Introduction: Investigation of the 2011 U.S. listeriosis outbreak associated withcontaminated cantaloupes revealed that transfer of L. monocytogenes(Lm) from equipment surfaces to melons in the packing facility was a potential route of contamination. Purpose:This study examined the persistence of Lm...

  3. Equipment for the Disabled. Volumes 1 - 4.

    Science.gov (United States)

    Wilshere, E. Rosamond, Comp.

    Four volumes of equipment for the disabled which can simplify their lives and those who live with them are presented. The authors have not included surgical, medical, therapeutic, corrective or gymnastic equipment in the publication. Voume one includes house adaptations and planning, beds and bed accessories, chairs, and wheelchairs and…

  4. 29 CFR 1926.600 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... motors stopped and brakes set, unless work being performed requires otherwise. (ii) Whenever the equipment is parked, the parking brake shall be set. Equipment parked on inclines shall have the wheels chocked and the parking brake set. (4) The use, care and charging of all batteries shall conform to...

  5. Office equipment energy use and trends

    Energy Technology Data Exchange (ETDEWEB)

    Piette, M.A.; Eto, J.H.; Harris, J.P.

    1991-09-01

    Office information technologies are using an increasing amount of energy in commercial buildings. During recent forecasting hearings in California, the office equipment end use has been a major source of differences among forecasts of commercial sector energy use. Not only are there major differences in forecasted load growth resulting from the energy use of office equipment, but there are also differences in interpretations of historical and base-year estimates. Understanding office equipment energy use is particularly important because office equipment is widely believed to be the fastest growing electrical end use in the fastest growing sector. This report describes the development and application of a spreadsheet to estimate current and future energy use by office equipment. We define the term office equipment'' to mean information processing technologies used in buildings. The seven categories of office equipment relate to categories found in our analysis of utility surveys and industry sales reports. These seven categories of equipment are examined for eleven types of commercial buildings.

  6. Office equipment energy use and trends

    Energy Technology Data Exchange (ETDEWEB)

    Piette, M.A.; Eto, J.H.; Harris, J.P.

    1991-09-01

    Office information technologies are using an increasing amount of energy in commercial buildings. During recent forecasting hearings in California, the office equipment end use has been a major source of differences among forecasts of commercial sector energy use. Not only are there major differences in forecasted load growth resulting from the energy use of office equipment, but there are also differences in interpretations of historical and base-year estimates. Understanding office equipment energy use is particularly important because office equipment is widely believed to be the fastest growing electrical end use in the fastest growing sector. This report describes the development and application of a spreadsheet to estimate current and future energy use by office equipment. We define the term ``office equipment`` to mean information processing technologies used in buildings. The seven categories of office equipment relate to categories found in our analysis of utility surveys and industry sales reports. These seven categories of equipment are examined for eleven types of commercial buildings.

  7. Quantitative techniques for medical equipment maintenance management

    NARCIS (Netherlands)

    Ben Houria, Zeineb; Masmoudi, Malek; Al Hanbali, Ahmad; Khatrouch, Ikram; Masmoudi, Faouzi

    2016-01-01

    The maintenance department in a hospital is responsible for ensuring the safety of medical equipment and their availability while keeping the operation costs minimal. The selection of the best maintenance strategy is a key decision to reduce the equipment downtime, increase the availability, and bri

  8. 30 CFR 56.7002 - Equipment defects.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7002 Equipment defects. Equipment defects affecting safety shall be corrected...

  9. 30 CFR 57.7002 - Equipment defects.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7002 Equipment defects. Equipment defects affecting...

  10. Equipped for Life: More than a Game.

    Science.gov (United States)

    Shively, Randy

    2002-01-01

    The EQUIP Program teaches antisocial youth to think and behave more pro-socially and addresses motivating youth to use these tools. The Equipped for Life game is a motivational tool, which provides students with opportunities for social learning. Topics revolve around community reintegration and can be easily adapted to any cognitive behavioral…

  11. Communications techniques and equipment: A compilation

    Science.gov (United States)

    1975-01-01

    This Compilation is devoted to equipment and techniques in the field of communications. It contains three sections. One section is on telemetry, including articles on radar and antennas. The second section describes techniques and equipment for coding and handling data. The third and final section includes descriptions of amplifiers, receivers, and other communications subsystems.

  12. Functioning condition monitoring of industrial equipment

    Science.gov (United States)

    Ungureanu, N. S.; Petrovan, A.; Ungureanu, M.; Alexandrescu, M.

    2017-02-01

    The paper analyses the theoretical aspects related to monitoring industrial equipment. Are treated issues that concern the choosing of industrial equipment to be monitored, the parameters to be monitored, monitoring mode (local or remote) and the mode of collection and transmission of data.

  13. 46 CFR 184.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Heating equipment. 184.210 Section 184.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Cooking and Heating § 184.210 Heating...

  14. 46 CFR 153.466 - Electrical equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Electrical equipment. 153.466 Section 153.466 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING... Requirements for Flammable Or Combustible Cargoes § 153.466 Electrical equipment. A tankship carrying...

  15. 77 FR 13173 - Best Equipped Best Served

    Science.gov (United States)

    2012-03-05

    ... Federal Aviation Administration Best Equipped Best Served AGENCY: Department of Transportation, Federal... scenarios. The candidate proposals for discussion have been designed to deliver on the best equipped, best performing, best served concept for implementation in the 2012-2014 timeframe. The proposed scenarios target...

  16. 15 CFR 14.34 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... organizations for a fee that is less than private companies charge for equivalent services, unless specifically..., and continued need for the equipment. (4) A control system shall be in effect to insure adequate... the equipment, proper sales procedures shall be established which provide for competition to...

  17. 24 CFR 84.34 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... to non-Federal outside organizations for a fee that is less than private companies charge for... effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any loss, damage... the equipment, proper sales procedures shall be established which provide for competition to...

  18. 28 CFR 70.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... organizations for a fee that is less than private companies charge for equivalent services, unless specifically..., and continued need for the equipment. (4) A control system must be in effect to insure adequate... equipment, proper sales procedures must be established which provide for competition to the...

  19. [Metrological software of laser medical equipment].

    Science.gov (United States)

    Romashkov, A P; Glazov, A I; Tikhomirov, S V

    2001-01-01

    The paper considers the laser medical equipment situation that has established in Russia and that is characterized by the wide medical application of laser technologies and appropriate software and by inadequate development and imperfection of required metrological software and maintenance of laser equipment.

  20. 38 CFR 43.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Equipment. 43.32 Section 43.32 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) UNIFORM... the equipment in accordance with Federal agency rules and procedures, and submit an annual...

  1. MAGNETIC FLUID BEARINGS OF MINING EQUIPMENT

    Directory of Open Access Journals (Sweden)

    I. Gorlov

    2012-01-01

    Full Text Available The paper considers a problem pertaining to selection friction pair materials for plain bearings of mining equipment which are lubricated with  nano-dispersed magnetic oil. Methodology for equipment tests, technology for obtaining new anti-friction materials (polymer, ceramic, amorphous and investigation results are presented in the paper.

  2. EQUIP3 Newsletter. Issue Number 19

    Science.gov (United States)

    EQUIP3, 2009

    2009-01-01

    The "EQUIP3 Newsletter" is an e-newsletter that is currently sent to subscribers quarterly. It provides updates on EQUIP3 activities and initiatives, and shares excerpts from relevant youth development resources. This issue contains the following articles: (1) Bangladesh Youth Employment Pilot (BYEP); (2) CSY [Cross-Sectoral Youth]/YED…

  3. 21 CFR 211.65 - Equipment construction.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment construction. 211.65 Section 211.65 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS... construction. (a) Equipment shall be constructed so that surfaces that contact components, in-process...

  4. Days individual equipment of protection and professional risks; Equipements de protection individuelle et risques professionnelles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The personal protection equipment is studied in the legal way (legal liabilities, certification, European texts), technical way (ergonomics, painfulness of ventilated equipment wearing, reliability of a respirable air line, protection gloves against the chemical risk, exposure to nano particulates, working in hot area), human factors (hostile area and emotion management), studies on personal equipment such evaluation, efficiency, conception of new equipment, physiological tolerance, limit of use, and some general safety studies on the working places. (N.C.)

  5. Design Report of Volume Reduction and Handling Equipment of ACPF Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, K. C.; Ku, J. H.; Lee, W. K.; Lee, E. P.; Choung, W. M.; Cho, I. J.; Kook, D. H.; You, G. S.; Youn, J. S

    2007-01-15

    For the efficient disposal of wastes from the ACPF (Advanced spent fuel Conditioning Process Facility), hot cell filter press equipment, vacuum press equipment of compatible wastes and hot cell auxiliary crane were developed. The filter press equipment installed in hot cell is pneumatically driven and remotely operated. In order to avoid the contamination of hot cell by dust particles from filters being compressed, it is designed to compress filters with them put into the basket of the solid wastes cask. The performance test showed that the height of a filter was reduced by more than 75% and a basket could contain up to four compressed filters. The vacuum press equipment reduces the volume of the plastic bag containing compatible wastes such as cloth, plastic film and paper by vacuumizing the bag. It consists of the vacuum pump, the suction and HEPA filters and the manual pneumatic valve, and is designed to be easily handled and managed. Through the performance test, it is observed that the volume of wastes was reduced to a third. Also an additional crane of 300 kg capacity was manufactured and installed in the ACP hot cell to handle the salt ingot wastes container located where the overhead crane is not accessible. This report presenting the details of the design, manufacturing and performance of these equipment will be used as technical materials for the operation of the facility and the development of equipment.

  6. Universal null DTE (data terminal equipment)

    Science.gov (United States)

    George, M.; Pierson, L.G.; Wilkins, M.E.

    1987-11-09

    A communication device in the form of data terminal equipment permits two data communication equipments, each having its own master clock and operating at substantially the same nominal clock rate, to communicate with each other in a multi-segment circuit configuration of a general communication network even when phase or frequency errors exist between the two clocks. Data transmitted between communication equipments of two segments of the communication network is buffered. A variable buffer fill circuit is provided to fill the buffer to a selectable extent prior to initiation of data output clocking. Selection switches are provided to select the degree of buffer preload. A dynamic buffer fill circuit may be incorporated for automatically selecting the buffer fill level as a function of the difference in clock frequencies of the two equipments. Controllable alarm circuitry is provided for selectively generating an underflow or an overflow alarm to one or both of the communicating equipments. 5 figs.

  7. A change of culture: reducing blood culture contamination rates in an Emergency Department.

    Science.gov (United States)

    Bentley, James; Thakore, Shobhan; Muir, L; Baird, Alastair; Lee, Jennifer

    2016-01-01

    Blood cultures are an important investigation to help tailor effective management for patients with severe sepsis. Frequent contaminated samples increase laboratory workload and can delay or cause incorrect changes to patient management. This can prolong patient hospitalisation, increase the risk of harm and increase cost to health boards. Current guidelines advocate a contamination rate of 2-3%. From January 2013 to November 2014 inclusive, the contamination rate was 4.74% in our Emergency Department, responsible for initial management and investigation of over 40 cases of sepsis per month. A Quality Improvement team was created to try to reduce contamination rates to the recommended target. An initial baseline survey of local staff showed good understanding of when to obtain a blood culture but there was variability in the methods and equipment used. A project was then conducted which focused on rationalising and standardising equipment and technique for blood culture sampling along with staff education to support this change. A simple department target of 30 days free from a contaminated blood culture was created which, if achieved, would ensure a contamination rate of less than 3%. This was supported by ongoing surveillance of contamination rates and investigation of contaminated sample cases. We were able to then identify high risk patients and factors which increased the chance of blood culture contamination. This allowed us to formulate solutions to help reduce the risks of contamination. Department achievements and learning points to help prevent further contamination were fed back positively to all staff. This project operated for 12-months and successfully reduced local contamination rates to 2.0%.

  8. DARA vestibular equipment onboard MIR.

    Science.gov (United States)

    Hofmann, P; Kellig, A; Hoffmann, H U; Ruyters, G

    1998-01-01

    In space, the weightless environment provides a different stimulus to the otolith organs of the vestibular system, and the resulting signals no longer correspond with the visual and other sensory signals sent to the brain. This signal conflict causes disorientation. To study this and also to understand the vestibular adaptation to weightlessness, DARA has developed scientific equipment for vestibular and visuo-oculomotoric investigations. Especially, two video-oculography systems (monocular--VOG--and binocular--BIVOG, respectively) as well as stimuli such as an optokinetic stimulation device have successfully been employed onboard MIR in the frame of national and European missions since 1992. The monocular VOG was used by Klaus Flade during the MIR '92 mission, by Victor Polyakov during his record 15 months stay onboard MIR in 1993/94 as well as by Ulf Merbold during EUROMIR '94. The binocular version was used by Thomas Reiter and Sergej Avdeyev during the 6 months EUROMIR '95 mission. PIs of the various experiments include H. Scherer and A. Clarke (FU Berlin), M. Dieterichs and S. Krafczyk (LMU Munchen) from Germany as well as C.H. Markham and S.G. Diamond from the United States. Video-Oculography (VOG) is a technique for examining the function of the human balance system located in the inner ear (vestibular system) and the visio-oculomotor interactions of the vestibular organ. The human eye movements are measured, recorded and evaluated by state-of-the-art video techniques. The method was first conceived and designed at the Vestibular Research Laboratory of the ENT Clinic in Steglitz, FU Berlin (A. Clarke, H. Scherer). Kayser-Threde developed, manufactured and tested the facilities for space application under contract to DARA. Evaluation software was first provided by the ENT Clinic, Berlin, later by our subcontractor Sensomotoric Instruments (SMI), Teltow. Optokinetic hardware to support visuo-oculomotoric investigations, has been shipped to MIR for EUROMIR '95

  9. 47 CFR 15.607 - Equipment authorization of Access BPL equipment.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Equipment authorization of Access BPL equipment. 15.607 Section 15.607 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Access Broadband Over Power Line (Access BPL) § 15.607 Equipment authorization of Access...

  10. Potential soil contaminant levels of polychlorinated dibenzodioxins and dibenzofurans at industrial facilities employing heat transfer operations

    Energy Technology Data Exchange (ETDEWEB)

    Korte, N.E.; Muhr, C.A.; Greene, D.W.

    1992-04-01

    Certain manufacturing facilities formerly used large quantities of polychlorinated biphenyl (PCB) fluids in heat transfer operations. At many of these locations, operations have also involved PCB-containing electrical equipment. Commonly, over many years of plant operations, spills and leaks have resulted in PCB soil contamination. Dioxins and furans have been associated with PCB contamination in both the technical and popular press. Consequently, the need for analyses for dioxins and furans must be evaluated at locations where soils are contaminated with PCBs. This report presents an evaluation of potential dioxin and furan soil contamination based on heat transfer operations and spills from electrical equipment. The following five scenarios were examined for dioxin and furan contamination: (1) impurities in heat transfer fluids, (2) formation during heat transfer operations, (3) pyrolysis of heat transfer fluids, (4) impurities in dielectric fluids, and (5) pyrolysis of dielectric fluids. The potential contamination with dioxins and furans was calculated and compared with a 20 ppb guideline that has been used by the Centers for Disease Control for dioxin in subsoil. The results demonstrated that dioxins are formed only under pyrolytic conditions and only from the trichlorobenzenes present in dielectric fluids. Furans are found as impurities in PCB fluids but, as with dioxins, are not formed in significant quantities except during pyrolysis. Fortunately, pyrolytic conditions involving PCB fluids and soil contamination are unlikely; therefore, analyses for dioxin and furan contamination in soils will rarely be needed.

  11. Regenerable Contaminant Removal System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Regenerable Contaminant Removal System (RCRS) is an innovative method to remove sulfur and halide compounds from contaminated gas streams to part-per-billion...

  12. Unregulated Contaminant Monitoring Program Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — EPA uses the Unregulated Contaminant Monitoring (UCM) program to collect data for contaminants suspected to be present in drinking water, but that do not have...

  13. A study on decontamination and decommissioning of experimental DUPIC equipment at PIEF 9405 hot cell

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H. H.; Park, J. J.; Shin, J. M.; Yang, M. S.; Lee, H. S.; Lee, E. P

    2000-09-01

    The characterization experiment for powder and sintered fuel had been performed using about 1 kg-U spent PWR fuel at No. 9405 hot-cell in PIEF(Post Irradiated Experiment Facility) since early in 1999. Currently, The experiments in PIEF have been completed. It is supposed to dismantle and decontaminate the installed equipment by the end of year 2000. Since all of DUPIC equipment in hot-cell are contaminated by high radioactive material, the decontamination and dismantlement must br performed remotely by M/S manipulator. During the radioactive waste packing and transportation, the reduction method of radiation exposure has to be considered. Firstly, This report describes the basic plan for dismantlement/decontamination of the characterization equipment(power and sintered fuel). And methods of measurement/packing/ transportation, method of dismantlement/decontamination of the experimental apparatus and the reduction method of radiation dose exposure, etc. are explained in order.

  14. Chlorine dioxide as a disinfectant for Ralstonia solanacearum control in water, storage and equipment

    Directory of Open Access Journals (Sweden)

    Popović Tatjana

    2016-01-01

    Full Text Available Brown rot or bacterial wilt caused by bacterium Ralstonia solanacearum is the main limiting factor in potato production. Quarantine measures are necessary to avoid spread of disease to disease-free areas. R. solanacearum has been shown to contaminate watercourses from which crop irrigation is then prohibited causing further potential losses in yield and quality. The bacteria also spread via surfaces that diseased seed potatoes come into contact with. This study showed bactericidal activity of chlorine dioxide (CIO2 on R. solanacearum for disinfection of water, surface and equipment. The results showed that CIO2 solution at concentration of 2 ppm at 30 minutes of exposure time had bactericidal effect for disinfection of water. For surface and equipment disinfection, concentration of 50 ppm showed total efficacy at 30 min and 5 sec exposure time, respectively. Results suggest that use of CIO2 as a disinfectant has a potential for control of brown rot pathogen in water, storage and equipment.

  15. Inheritance of telomere length in a bird.

    Directory of Open Access Journals (Sweden)

    Thorsten Horn

    Full Text Available Telomere dynamics are intensively studied in human ageing research and epidemiology, with many correlations reported between telomere length and age-related diseases, cancer and death. While telomere length is influenced by environmental factors there is also good evidence for a strong heritable component. In human, the mode of telomere length inheritance appears to be paternal and telomere length differs between sexes, with females having longer telomeres than males. Genetic factors, e.g. sex chromosomal inactivation, and non-genetic factors, e.g. antioxidant properties of oestrogen, have been suggested as possible explanations for these sex-specific telomere inheritance and telomere length differences. To test the influence of sex chromosomes on telomere length, we investigated inheritance and sex-specificity of telomere length in a bird species, the kakapo (Strigops habroptilus, in which females are the heterogametic sex (ZW and males are the homogametic (ZZ sex. We found that, contrary to findings in humans, telomere length was maternally inherited and also longer in males. These results argue against an effect of sex hormones on telomere length and suggest that factors associated with heterogamy may play a role in telomere inheritance and sex-specific differences in telomere length.

  16. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in

  17. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in th

  18. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in th

  19. Exercise and sports equipment: some ergonomics aspects.

    Science.gov (United States)

    Reilly, T; Lees, A

    1984-12-01

    Sports equipment encompasses a gamut of devices used in laboratory, training and competitive contexts and these form the content of this paper. Ergometers range in sophistication from friction braked stationary bicycles to computer controlled simulators which incorporate exercise modes specific to the athletic user. These are now used in training, as experimental devices and in some instances for competition purposes. Training equipment exhibits a similar emphasis on exercise specificity, safety being an important aspect of its use. Design of projectiles for sporting activities has mainly reflected their traditional modes of use, the introduction of synthetic materials having some ergonomics implications. Similarly, materials science and design technology have contributed innovations in equipment for racquet sports and hitting implements. The changes have tended to be associated with availability of new materials for product construction and have implications for safety and skill in the transition to using the new products. Ski equipment design illustrates ergonomics factors in interfacing the performer with the sporting environment and how equipment has progressed by regenerative design processes. Enhancement of performance in some sports must be accompanied by an awareness of safety requirements: where appropriate, risks to participants should be reduced by use of protective clothing and equipment. Enforced validation of protective equipment is recommended to raise safety levels in certain sports and the safety of spectators must not be neglected. Human factors criteria can then be applied in monitoring, officiating and spectating at sporting events.

  20. Contaminant Research in Canada

    Directory of Open Access Journals (Sweden)

    Wren C.

    1987-03-01

    Full Text Available Contaminant Research in CanadaPages 9 - 11 (ReportChristopher WrenAbstract:During the 1983/84 and 1984/85 trapping seasons, carcasses of river otter (Lutra canadensis were collected for contaminant analysis from trappers in Ontario. The studies identified clear differences in tissue levels of Hg, Pb and Cd between different collection areas. There is evidence to support Hg poisoning as the cause of death in at least one otter along this river system. The studies emphasize the potential interactions of toxic chemicals with each other and with natural stresses (e.g. cold, starvation, disease. More research is required along these lines since simultaneous exposure to more than one chemical and other stresses is more typical of conditions in the wild.

  1. Contain contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Mutch, R.D. Jr.; Caputi, J.R. [Eckenfelder, Inc., Mahwah, NJ (United States); Ash, R.E. IV [Eckenfelder Inc., Nashville, TN (United States)

    1997-05-01

    Despite recent progress in innovative treatment technologies, many problems with contaminated groundwater still require the use of barrier walls, typically in combination with extraction and treatment systems. New technologies for subsurface barrier walls, mostly based on geomembranes, advancements in self-hardening slurries and permeation grouts with materials such as colloidal silica gel and montan wax emulsions, are being developed at an unprecedented pace. The paper discusses deep soil mixing, jet grouting, slurry trenches, and permeation grouting.

  2. Emerging contaminants in groundwater

    OpenAIRE

    Lapworth, Dan; Stuart, Marianne; HART Alwyn; Crane, Emily; Baran, Nicole

    2011-01-01

    The term ‘emerging contaminants’ (ECs) is used to cover not only newly developed compounds but also includes newly discovered compounds in the environment (often due to analytical developments), and compounds that have been recently categorised as contaminants. ECs include a huge array of different compounds (and their metabolites) that are used by society for a range of purposes and include; pharmaceuticals, pesticides, personal care products, veterinary medicines, engineered nano-materials,...

  3. NAFTA opportunities: Electrical equipment and power generation

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    The North American Free Trade Agreement (NAFTA) provides significant commercial opportunities in Mexico and Canada for the United States electric equipment and power generation industries, through increased goods and services exports to the Federal Electricity Commission (CFE) and through new U.S. investment in electricity generation facilities in Mexico. Canada and Mexico are the United States' two largest export markets for electrical equipment with exports of $1.53 billion and $1.51 billion, respectively, in 1992. Canadian and Mexican markets represent approximately 47 percent of total U.S. exports of electric equipment. The report presents an economic analysis of the section.

  4. Incidents of chemical reactions in cell equipment

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, N.M.; Barlow, C.R. [Uranium Enrichment Organization, Oak Ridge, TN (United States)

    1991-12-31

    Strongly exothermic reactions can occur between equipment structural components and process gases under certain accident conditions in the diffusion enrichment cascades. This paper describes the conditions required for initiation of these reactions, and describes the range of such reactions experienced over nearly 50 years of equipment operation in the US uranium enrichment program. Factors are cited which can promote or limit the destructive extent of these reactions, and process operations are described which are designed to control the reactions to minimize equipment damage, downtime, and the possibility of material releases.

  5. Contaminants in human milk.

    Science.gov (United States)

    Olszyna-Marzys, A E

    1978-09-01

    There is a paucity of information regarding excretion of contaminants in human milk, due to experimental difficulties and until recently a general lack of interest. Because of the high fat content of milk and as its acidity is higher than that of plasma, nearly all liposoluble and basic agents consumed by the mother will be excreted in the milk. Distinction must be made between, on the one hand drugs and social toxicants such as smoking and alcohol, whose intake can be stopped or limited during pregnancy and lactation, and ecological toxicants present in a polluted environment to which the mother is exposed. Cases have occurred of heavy prenatal and postnatal intoxication of infants with hexachlorobenzene in Turkey and methylmercury in Iraq due to consumption of fungicide-treated seed wheat by pregnant and lactating mothers. Recent attention has been concentrated on contamination of milk with organochlorine compounds such as DDT and PCB's, that are found in many parts of the world. The heaviest contamination with DDT has been found in Guatemala, resulting in suckling infants consuming many times the Acceptable Daily Intake of this compound proposed by WHO, with unknown future effects.

  6. Axial Globe Length in Congenital Ptosis.

    Science.gov (United States)

    Takahashi, Yasuhiro; Kang, Hyera; Kakizaki, Hirohiko

    2015-01-01

    To compare axial globe length between affected and unaffected sides in patients with unilateral congenital ptosis. This prospective observational study included 37 patients (age range: 7 months to 58 years). The axial globe length, margin reflex distance-1 (MRD-1), and refractive power were measured. The axial globe length difference was calculated by subtracting the axial globe length on the unaffected side from that of the affected side. The relationships among axial globe length differences, MRD-1 on the affected sides, and patient ages were analyzed using multiple regression analysis. No significant differences were found in the axial globe length between sides (P = .677). The axial globe length difference was 0.17 ± 0.30 mm (mean ± standard deviation), and two patients (5.4%), aged 32 to 57 years, showed axial globe length more than 0.67 mm longer (corresponding to a refractive power of 2 diopters) on the affected side compared to the unaffected side. The multiple regression model between axial globe length difference, patient age, and MRD-1 on the affected sides was less appropriate (YAGL = 0.003XAGE-0.048XMRD-1 +0.112; r = 0.338; adjusted r2 = 0.062; P = .127). The cylindrical power was greater on the affected side (P = .046), although the spherical power was not different between sides (P = .657). No significant difference was identified in the axial globe length between sides, and only 5% of non-pediatric patients showed an axial globe length more than 0.67 mm longer on the affected side. Congenital ptosis may have little effect on axial globe length elongation, and the risk of axial myopia-induced anisometropic amblyopia may be low in patients with unilateral congenital ptosis. Copyright 2015, SLACK Incorporated.

  7. Diabetes mellitus and the eye: axial length

    OpenAIRE

    Huntjens, B.; O’Donnell, C.

    2006-01-01

    Background and aims: The refractive error of the eye is dependent on its axial length. Refractive error is known to fluctuate significantly in poorly controlled diabetic patients. Recently it has been reported that human eyes fluctuate in axial length during the day. However, this change is not detectable in all subjects, suggesting physiological influences such as diet. The purpose of this study was to investigate fluctuations in axial length and blood glucose levels (BGLs) in diabetic patie...

  8. Fibonacci Lengths of Certain Nilpotent 2-Groups

    Institute of Scientific and Technical Information of China (English)

    H. DOOSTIE; A. T. ADNANI

    2007-01-01

    In this paper, we study two classes of 2-generated 2-groups of nilpotency class 2 classified by Kluempen in 2002 and also a class of finite 2-groups of high nilpotency class for their Fibonacci lengths.Their involvement in certain interesting sequences of Tribonacci numbers gives us some explicit formulas for the Fibonacci lengths and this adds to the small class of finite groups for which the Fibonacci length are known.

  9. Large Slip Length over a Nanopatterned Surface

    Institute of Scientific and Technical Information of China (English)

    LI Ding; DI Qin-Feng; LI Jing-Yuan; QIAN Yue-Hong; FANG Hai-Ping

    2007-01-01

    A thermodynamic method is employed to analyse the slip length of hydrophobic nanopatterned surface.The maximal slip lengths with respect to the hydrophobicity of the nanopatterned surface are computed.It is found that the slip length reaches more than 50μm if the nanopatterned surfaces have a contact angle larger than 160°.Such results are expected to find extensive applications in micro-channels and helpful to understand recent experimental observations of the slippage of nanopatterned surfaces.

  10. Dither Cavity Length Controller with Iodine Locking

    Directory of Open Access Journals (Sweden)

    Lawson Marty

    2016-01-01

    Full Text Available A cavity length controller for a seeded Q-switched frequency doubled Nd:YAG laser is constructed. The cavity length controller uses a piezo-mirror dither voltage to find the optimum length for the seeded cavity. The piezo-mirror dither also dithers the optical frequency of the output pulse. [1]. This dither in optical frequency is then used to lock to an Iodine absorption line.

  11. Understanding Contamination; Twenty Years of Simulating Radiological Contamination

    Energy Technology Data Exchange (ETDEWEB)

    Emily Snyder; John Drake; Ryan James

    2012-02-01

    A wide variety of simulated contamination methods have been developed by researchers to reproducibly test radiological decontamination methods. Some twenty years ago a method of non-radioactive contamination simulation was proposed at the Idaho National Laboratory (INL) that mimicked the character of radioactive cesium and zirconium contamination on stainless steel. It involved baking the contamination into the surface of the stainless steel in order to 'fix' it into a tenacious, tightly bound oxide layer. This type of contamination was particularly applicable to nuclear processing facilities (and nuclear reactors) where oxide growth and exchange of radioactive materials within the oxide layer became the predominant model for material/contaminant interaction. Additional simulation methods and their empirically derived basis (from a nuclear fuel reprocessing facility) are discussed. In the last ten years the INL, working with the Defense Advanced Research Projects Agency (DARPA) and the National Homeland Security Research Center (NHSRC), has continued to develop contamination simulation methodologies. The most notable of these newer methodologies was developed to compare the efficacy of different decontamination technologies against radiological dispersal device (RDD, 'dirty bomb') type of contamination. There are many different scenarios for how RDD contamination may be spread, but the most commonly used one at the INL involves the dispersal of an aqueous solution containing radioactive Cs-137. This method was chosen during the DARPA projects and has continued through the NHSRC series of decontamination trials and also gives a tenacious 'fixed' contamination. Much has been learned about the interaction of cesium contamination with building materials, particularly concrete, throughout these tests. The effects of porosity, cation-exchange capacity of the material and the amount of dirt and debris on the surface are very important factors

  12. New length operator for loop quantum gravity

    CERN Document Server

    Ma, Yongge; Yang, Jinsong

    2010-01-01

    An alternative expression for the length operator in loop quantum gravity is presented. The operator is background-independent, symmetric, positive semi-definite, and well-defined on the kinematical Hilbert space. The expression for the regularized length operator can moreover be understood both from a simple geometrical perspective as the average of a formula relating the length to area, volume and flux operators, and also consistently as the result of direct substitution of the densitized triad operator with the functional derivative operator into the regularized expression of the length. Both these derivations are discussed, and the origin of an undetermined overall factor in each case is also elucidated.

  13. On the attached length of orifices

    Science.gov (United States)

    Komkin, A. I.; Mironov, M. A.; Yudin, S. I.

    2012-11-01

    The attached length of orifices in reactive mufflers has been estimated based on numerical calculations by the finite-element method. The numerical results for a diaphragm in a duct are compared with the theoretical data obtained by Rayleigh, Fock, Karal, and Ingard. The dependence of the attached length on the diaphragm thickness is given. The results obtained are generalized for the case in which the orifice is a Helmholtz resonator neck. The effect of the resonator length on the attached length of the neck is analyzed.

  14. Mouse gestation length is genetically determined.

    Directory of Open Access Journals (Sweden)

    Stephen A Murray

    Full Text Available BACKGROUND: Preterm birth is an enormous public health problem, affecting over 12% of live births and costing over $26 billion in the United States alone. The causes are complex, but twin studies support the role of genetics in determining gestation length. Despite widespread use of the mouse in studies of the genetics of preterm birth, there have been few studies that actually address the precise natural gestation length of the mouse, and to what degree the timing of labor and birth is genetically determined. METHODOLOGY/PRINCIPAL FINDINGS: To further develop the mouse as a genetic model of preterm birth, we developed a high-throughput monitoring system and measured the gestation length in 15 inbred strains. Our results show an unexpectedly wide variation in overall gestation length between strains that approaches two full days, while intra-strain variation is quite low. Although litter size shows a strong inverse correlation with gestation length, genetic difference alone accounts for a significant portion of the variation. In addition, ovarian transplant experiments support a primary role of maternal genetics in the determination of gestation length. Preliminary analysis of gestation length in the C57BL/6J-Chr#(A/J/NaJ chromosome substitution strain (B.A CSS panel suggests complex genetic control of gestation length. CONCLUSIONS/SIGNIFICANCE: Together, these data support the role of genetics in regulating gestation length and present the mouse as an important tool for the discovery of genes governing preterm birth.

  15. Forensic application of microbiological culture analysis to identify mail intentionally contaminated with Bacillus anthracis spores.

    Science.gov (United States)

    Beecher, Douglas J

    2006-08-01

    The discovery of a letter intentionally filled with dried Bacillus anthracis spores in the office of a United States senator prompted the collection and quarantine of all mail in congressional buildings. This mail was subsequently searched for additional intentionally contaminated letters. A microbiological sampling strategy was used to locate heavy contamination within the 642 separate plastic bags containing the mail. Swab sampling identified 20 bags for manual and visual examination. Air sampling within the 20 bags indicated that one bag was orders of magnitude more contaminated than all the others. This bag contained a letter addressed to Senator Patrick Leahy that had been loaded with dried B. anthracis spores. Microbiological sampling of compartmentalized batches of mail proved to be efficient and relatively safe. Efficiency was increased by inoculating culture media in the hot zone rather than transferring swab samples to a laboratory for inoculation. All mail sampling was complete within 4 days with minimal contamination of the sampling environment or personnel. However, physically handling the intentionally contaminated letter proved to be exceptionally hazardous, as did sorting of cross-contaminated mail, which resulted in generation of hazardous aerosol and extensive contamination of protective clothing. Nearly 8 x 10(6) CFU was removed from the most highly cross-contaminated piece of mail found. Tracking data indicated that this and other heavily contaminated envelopes had been processed through the same mail sorting equipment as, and within 1 s of, two intentionally contaminated letters.

  16. Phenotypic and genetic diversity of Saccharomyces contaminants isolated from lager breweries and their phylogenetic relationship with brewing yeasts

    DEFF Research Database (Denmark)

    Jespersen, Lene; Kühle, Alis Van der Aa; Petersen, Kamilla M.

    2000-01-01

    -amplified intergenic transcribed spacer (ITS) regions. Chromosome length polymorphism (CLP) was evident among the Saccharomyces brewing contaminants with chromosome profiles typical of Saccharomyces sensu stricto. Based upon cluster analysis of their chromosome profiles the majority of the brewing contaminants could...... be grouped as either S. cerevisiae or S. pastorianus/S. bayanus. Further, the technique was able to differentiate between almost all brewing contaminants and to separate them from any specific lager brewing yeast. The diversity of the Saccharomyces brewing contaminants clearly demonstrated by their CLP...... in the SaccharomYces brewing contaminants indicate their adaptation to a maltose-enriched environment....

  17. DRILL WEAR DURING THE BORING OF PARTICLE BOARD: A MULTI-FACTOR ANALYSIS INCLUDING EFFECTS OF MINERAL CONTAMINANTS

    Directory of Open Access Journals (Sweden)

    Boleslaw Porankiewicz

    2008-05-01

    Full Text Available This paper evaluates and discusses multifactor non-linear, statistical dependencies of drill side-edges recession VBK and drill diameter recession DW on the cutting path length LC, the content of hard mineral contaminants CMC, the size of contaminant particles SMC, and the Mohs hardness MH. Significant influence of the cutting path LC, the content CMC of hard mineral contaminants (HMC, and the size of contaminant particles SMC was found, whereas the Mohs hardness MH of the contamination particles was less important.

  18. Contamination monitoring activities in Kanupp

    Energy Technology Data Exchange (ETDEWEB)

    Naqvi, S.S. [Karachi Nuclear Power Plant (Pakistan)

    1997-06-01

    The Karachi Nuclear Power Plant (Kanupp) is a 137 MWe pressurized heavy water reactor, designed and erected by the Canadian General Electric Company as a turn key project. The plant is in operation since it was commissioned in the year 1972. It is located at the Arabian Sea Coast about 15 miles to the west of Karachi. During its more than two decades of operation, the plant has generated about 8 billion units of electricity with an average life time availability factor of 60%. In Kanupp, radioactive contamination may exit due to the release of fission product, activation products etc., which may somehow escape from its confinement and may contaminate surface or other media such as air, water etc. In this paper, following items are described: main aspects of contamination, status of contamination monitoring, need of contamination monitoring, radiation protection activity, instruments, contamination, current status of contamination survey materials and their disposal, and environmental monitoring. (G.K.)

  19. Biological Remediation of Petroleum Contaminants

    Science.gov (United States)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  20. Simulated Variable Inertia for Exercise Equipment Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Exercise equipment for on-orbit or very low gravity use has been developed using springs or motors to provide a constant force for resistive exercise.  These...

  1. 29 CFR 1910.263 - Bakery equipment.

    Science.gov (United States)

    2010-07-01

    ... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Special Industries § 1910.263 Bakery equipment. (a) General... the motor control circuit. (ii) (13) Chocolate melting, refining, and mixing kettles. Each kettle...

  2. Solar-Radiation Measuring Equipment and Glossary

    Science.gov (United States)

    Carter, E. A.; Patel, A. M.; Greenbaum, S. A.

    1982-01-01

    1976 listing of commercially available solar-radiation measuring equipment is presented in 50-page report. Sensor type, response time, cost data, and comments concerning specifications and intended usage are listed for 145 instruments from 38 manufactures.

  3. Field surveys of office equipment operating patterns

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Carrie A.; Roberson, Judy A.; Brown, Richard E.; Payne, Christopher T.; Nordman, Bruce; Koomey, Jonathan G.

    2001-09-05

    This paper presents the results of 11 after-hours walk-throughs of offices in the San Francisco CA and Washington D.C. areas. The primary purpose of these walk-throughs was to collect data on turn-off rates for various types of office equipment (computers, monitors, printers, fax machines, copiers, and multifunction products). Each piece of equipment observed was recorded and its power status noted (e.g. on, off, low power). Whenever possible, we also recorded whether power management was enabled on the equipment. The floor area audited was recorded as well, which allowed us to calculate equipment densities. We found that only 44 percent of computers, 32 percent of monitors, and 25 percent of printers were turned off at night. Based on our observations we estimate success rates of 56 percent for monitor power management and 96 percent for enabling of power management on printers.

  4. VIRTUAL ELECTRONIC COMPONENTS OF THE ELECTRONIC EQUIPMENT

    Directory of Open Access Journals (Sweden)

    E. Lazarevich

    2013-01-01

    Full Text Available The article is present new idea of the creation, developments and improvements of the electronic equipment of complex systems by means of the virtual electronic components. The idea of the virtual electronic components is a presentation and perception of the creation and developments of the equipment on two forming: real – in the manner of standard marketed block of the intellectual property and image – in the manner of virtual component. The real component in most cases slows the development of the electronic equipment. The imaginary component is the «locomotive» of development of the electronic equipment. The Imaginary component contains the scientific has brushed against developer. The scientific has brushed against developer reveals of itself in the manner of virtual component on the modern level of the design rates of microelectronics.

  5. Mechanization of hydraulic testing of chemical equipment

    Energy Technology Data Exchange (ETDEWEB)

    Bannikov, M.T.; Fridman, R.N.; Petrovnin, A.I.

    1982-09-01

    The Institute VNIIPTKhimmash has worked out a comprehensive list of equipment for testing for strength and tightness containers and heat exchangers with jackets, with mixers, also of individual parts and subassemblies for this equipment. Points out that in the test stands developed for hydraulic testing of vessels both individual and centralized recirculating water supply can be used. Concludes that a reduction in labor consumption in hydraulic testing and in servicing of all the equipment used, an increase in the mechanization of this kind of chemical equipment, and the solution of the problem of standardization not only with regard to dimensions and parameters, but also with regard to the makes and types of the materials used, will make possible a considerable increase in labor productivity and product quality.

  6. 14 CFR 91.513 - Emergency equipment.

    Science.gov (United States)

    2010-01-01

    ... treatment of injuries likely to occur in flight or in minor accidents must be provided. (e) Each airplane accommodating more than 19 passengers must be equipped with a crash axe. (f) Each passenger-carrying airplane...

  7. CNPC Exports Drilling Equipment to United States

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Beijing Petroleum Machinery Plant(BPM) of CNPC and Rowan Drilling Company Inc, one of the most powerful drilling service and driller manufacturing companies in the United States signed a petroleum equipment contract on December 9 in Beijing.

  8. 50 CFR 27.72 - Audio equipment.

    Science.gov (United States)

    2010-10-01

    ... NATIONAL WILDLIFE REFUGE SYSTEM PROHIBITED ACTS Disturbing Violations: Light and Sound Equipment § 27.72..., loudspeakers, television sets, public address systems and musical instruments so as to cause unreasonable...

  9. Donning and Doffing Personal Protective Equipment

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Provides stepwise instructions and guidance on how to properly put on and take of personal protective equipment (PPE) when conducting surveillance or sampling...

  10. Hazard Analysis. Football: Activity and Related Equipment.

    Science.gov (United States)

    1974

    Data on football injuries acquired from surveillance sources and in-depth investigations are presented. Results of the study are summarized by descriptions of the accident sequence, diagnosis of the injury, and specific equipment involved in the injury. (JD)

  11. Field surveys of office equipment operating patterns

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Carrie A.; Roberson, Judy A.; Brown, Richard E.; Payne, Christopher T.; Nordman, Bruce; Koomey, Jonathan G.

    2001-09-05

    This paper presents the results of 11 after-hours walk-throughs of offices in the San Francisco CA and Washington D.C. areas. The primary purpose of these walk-throughs was to collect data on turn-off rates for various types of office equipment (computers, monitors, printers, fax machines, copiers, and multifunction products). Each piece of equipment observed was recorded and its power status noted (e.g. on, off, low power). Whenever possible, we also recorded whether power management was enabled on the equipment. The floor area audited was recorded as well, which allowed us to calculate equipment densities. We found that only 44 percent of computers, 32 percent of monitors, and 25 percent of printers were turned off at night. Based on our observations we estimate success rates of 56 percent for monitor power management and 96 percent for enabling of power management on printers.

  12. Inventory Control for Furniture and Equipment.

    Science.gov (United States)

    Nelson, Mason

    1982-01-01

    Keeping track of educational furniture and equipment is necessary for accountability and insurance. A categorization and numbering system can organize information submitted by school personnel and can be used by hand or by computer. (MLF)

  13. Hot conditioning equipment conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Bradshaw, F.W., Westinghouse Hanford

    1996-08-06

    This report documents the conceptual design of the Hot Conditioning System Equipment. The Hot conditioning System will consist of two separate designs: the Hot Conditioning System Equipment; and the Hot Conditioning System Annex. The Hot Conditioning System Equipment Design includes the equipment such as ovens, vacuum pumps, inert gas delivery systems, etc.necessary to condition spent nuclear fuel currently in storage in the K Basins of the Hanford Site. The Hot Conditioning System Annex consists of the facility of house the Hot Conditioning System. The Hot Conditioning System will be housed in an annex to the Canister Storage Building. The Hot Conditioning System will consist of pits in the floor which contain ovens in which the spent nuclear will be conditioned prior to interim storage.

  14. ENERGY STAR Certified Electric Vehicle Supply Equipment

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.0 ENERGY STAR Program Requirements for Electric Vehicle Supply Equipment that are...

  15. Safety Assessment of Low-Contaminated Equipment Dismantling at Nuclear Power Plants

    Directory of Open Access Journals (Sweden)

    Egidijus Babilas

    2015-01-01

    Full Text Available The decommissioning of nuclear facilities requires adequate planning and demonstration that dismantling and decontamination activities can be conducted safely. Existing safety standards require that an appropriate safety assessment be performed to support the decommissioning plan for each facility (International Atomic Energy Agency, 2006. This paper presents safety assessment approach used in Lithuania during the development of the first dismantling and decontamination project for Ignalina NPP. The paper will mainly focus on the identification and assessment of the hazards raised due to dismantling and decontamination activities at Ignalina Nuclear Power Plant and on the assessment of the nonradiological and radiological consequences of the indicated most dangerous initiating event. The drop of heavy item was indicated as one of most dangerous initiating events for the discussed Ignalina Nuclear Power Plant dismantling and decontamination project. For the analysis of the nonradiological impact the finite element model for the load drop force calculation was developed. The radiological impact was evaluated in those accident cases which would lead to the worst radiological consequences. The assessments results show that structural integrity of the building and supporting columns of building structures will be maintained and radiological consequences are lower than the annual regulatory operator dose limit.

  16. Chemical, Biological, and Radiological (CBR) Contamination Survivability, Small Items of Equipment

    Science.gov (United States)

    2012-06-22

    packing closed cell foam planks Expected to absorb and desorb chemical agents and trap nuclear and biological agents. May disintegrate when exposed...property-effects of liquids X 34 Peel/lap shear strength change X X X X 35 Adhesion (loss of), blistering , spalling X X X X X

  17. Manufacture and maintenance of laboratory equipment

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Kim, Jong Kyun; Yeum, Ki Eon; Park, Myung Ku; Hong, Soon Eon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyung Sik; Lee, Won Jae; Yoon, Ki Byung; Kim, Heung Woo; Lee, In Bae; Yeom, Jeong Hyun; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Seo, Yong Chil; Yang, Song Yeul; Lee, Young Soon; Choi, Byung Kwon; Chang, Kyung Duk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of request working to the machine shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the machine shop is to support the successful and convenient performance of the R and D by manufacture and maintenance of all sorts of laboratory equipment. 11 tabs., 3 figs. (Author) .new.

  18. MODERN MANAGEMENT METHODS FOR EQUIPMENT MAINTENANCE

    OpenAIRE

    Ioan Cucu; Ciprian Cucu

    2009-01-01

    The concept of maintenance in the field of complex equipment wasdeveloped in the USA being quickly adopted by European countries and Japan. TheAmerican maintenance concept has the significance of creating a support system forindustrial equipment functioning. Functional maintenance is one of the most frequentused methods in maintenance management for industrial enterprises. This paper tries topresent some aspects related to the systemic approach of the functional maintenancemodel, starting fro...

  19. Equipment selection heuristics for microwave fixed links

    Science.gov (United States)

    Flood, I. D.; Allen, S. M.

    2014-08-01

    Microwave fixed links use highly standardized radio equipment and, in the radio equipment standard referenced in this paper, there is a choice between exactly two radio systems when the assigner wishes to resolve a specific data rate exactly: one using a relatively lower-order modulation scheme and one a relatively higher-order scheme. Although the higher-order equipment requires less bandwidth for an isolated link, these systems radiate at higher powers and require larger protection ratios in the radio interference environment which lead to well-established trade-offs between modulation, bandwidth, equivalent isotropic radiated power, and frequency assignment criteria. Our earlier research showed that by extending the Frequency Assignment Problem to include equipment selection and using lower-order modulation equipment on selected links, we can actually reduce the overall span of frequencies required for a network frequency assignment. This work focused on the development of integer programming formulations and analyzed the exact solutions obtained. Exact solutions are impractical for real world problems; hence, here we focus on the development of heuristics for equipment selection. We can model the fixed link network as a complete graph where the vertices represent fixed link frequency assignment requests and the edges represent interference between pairs of vertices. Using a graph theoretic analysis of the interference problem, we propose heuristic techniques and discuss the relative success of our approach in this article.

  20. 7 CFR 58.229 - Filler and packaging equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Filler and packaging equipment. 58.229 Section 58.229....229 Filler and packaging equipment. All filling and packaging equipment shall be of sanitary... equipment should comply with the 3-A Sanitary Standards for equipment for Packaging Dry Milk and Dry...

  1. 14 CFR 23.1461 - Equipment containing high energy rotors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Equipment containing high energy rotors. 23... Equipment Miscellaneous Equipment § 23.1461 Equipment containing high energy rotors. (a) Equipment, such as Auxiliary Power Units (APU) and constant speed drive units, containing high energy rotors must...

  2. 30 CFR 57.4260 - Underground self-propelled equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Underground self-propelled equipment. 57.4260... Prevention and Control Firefighting Equipment § 57.4260 Underground self-propelled equipment. (a) Whenever self-propelled equipment is used underground, a fire extinguisher shall be on the equipment....

  3. 30 CFR 56.4230 - Self-propelled equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Self-propelled equipment. 56.4230 Section 56... Control Firefighting Equipment § 56.4230 Self-propelled equipment. (a)(1) Whenever a fire or its effects could impede escape from self-propelled equipment, a fire extinguisher shall be on the equipment....

  4. 42 CFR 414.226 - Oxygen and oxygen equipment.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Oxygen and oxygen equipment. 414.226 Section 414... Equipment and Prosthetic and Orthotic Devices § 414.226 Oxygen and oxygen equipment. (a) Payment rules—(1) Oxygen equipment. Payment for rental of oxygen equipment is made based on a monthly fee schedule...

  5. 14 CFR 29.1353 - Electrical equipment and installations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electrical equipment and installations. 29... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 29.1353 Electrical equipment and installations. (a) Electrical equipment, controls, and...

  6. 14 CFR 25.1353 - Electrical equipment and installations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electrical equipment and installations. 25... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Electrical Systems and Equipment § 25.1353 Electrical equipment and installations. (a) Electrical equipment and controls must...

  7. Length-biased Weighted Maxwell Distribution

    Directory of Open Access Journals (Sweden)

    Kanak Modi

    2015-12-01

    Full Text Available The concept of length-biased distribution can be employed in development of proper models for life-time data. In this paper, we develop the length-biased form of Weighted Maxwell distribution (WMD. We study the statistical properties of the derived distribution including moments, moment generating function, hazard rate, reverse hazard rate, Shannon entropy and estimation of parameters

  8. Segment lengths influence hill walking strategies.

    Science.gov (United States)

    Sheehan, Riley C; Gottschall, Jinger S

    2014-08-22

    Segment lengths are known to influence walking kinematics and muscle activity patterns. During level walking at the same speed, taller individuals take longer, slower strides than shorter individuals. Based on this, we sought to determine if segment lengths also influenced hill walking strategies. We hypothesized that individuals with longer segments would display more joint flexion going uphill and more extension going downhill as well as greater lateral gastrocnemius and vastus lateralis activity in both directions. Twenty young adults of varying heights (below 155 cm to above 188 cm) walked at 1.25 m/s on a level treadmill as well as 6° and 12° up and downhill slopes while we collected kinematic and muscle activity data. Subsequently, we ran linear regressions for each of the variables with height, leg, thigh, and shank length. Despite our population having twice the anthropometric variability, the level and hill walking patterns matched closely with previous studies. While there were significant differences between level and hill walking, there were few hill walking variables that were correlated with segment length. In support of our hypothesis, taller individuals had greater knee and ankle flexion during uphill walking. However, the majority of the correlations were between tibialis anterior and lateral gastrocnemius activities and shank length. Contrary to our hypothesis, relative step length and muscle activity decreased with segment length, specifically shank length. In summary, it appears that individuals with shorter segments require greater propulsion and toe clearance during uphill walking as well as greater braking and stability during downhill walking.

  9. Influence of mandibular length on mouth opening

    NARCIS (Netherlands)

    Dijkstra, PU; Hof, AL; Stegenga, B; De Bont, LGM

    1999-01-01

    Theoretically, mouth opening not only reflects the mobility of the temporomandibular joints (TMJs) but also the mandibular length. Clinically, the exact relationship between mouth opening, mandibular length, and mobility of TMJs is unclear. To study this relationship 91 healthy subjects, 59 women an

  10. Extending electronic length frequency analysis in R

    DEFF Research Database (Denmark)

    Taylor, M. H.; Mildenberger, Tobias K.

    2017-01-01

    Electronic length frequency analysis (ELEFAN) is a system of stock assessment methods using length-frequency (LFQ) data. One step is the estimation of growth from the progression of LFQ modes through time using the von Bertalanffy growth function (VBGF). The option to fit a seasonally oscillating...

  11. Leaf Length Variation in Perennial Forage Grasses

    Directory of Open Access Journals (Sweden)

    Philippe Barre

    2015-08-01

    Full Text Available Leaf length is a key factor in the economic value of different grass species and cultivars in forage production. It is also important for the survival of individual plants within a sward. The objective of this paper is to discuss the basis of within-species variation in leaf length. Selection for leaf length has been highly efficient, with moderate to high narrow sense heritability. Nevertheless, the genetic regulation of leaf length is complex because it involves many genes with small individual effects. This could explain the low stability of QTL found in different studies. Leaf length has a strong response to environmental conditions. However, when significant genotype × environment interactions have been identified, their effects have been smaller than the main effects. Recent modelling-based research suggests that many of the reported environmental effects on leaf length and genotype × environment interactions could be biased. Indeed, it has been shown that leaf length is an emergent property strongly affected by the architectural state of the plant during significant periods prior to leaf emergence. This approach could lead to improved understanding of the factors affecting leaf length, as well as better estimates of the main genetic effects.

  12. Analysis of ureteral length in adult cadavers

    Directory of Open Access Journals (Sweden)

    Hugo F. F. Novaes

    2013-04-01

    Full Text Available Introduction In some occasions, correlations between human structures can help planning surgical intra-abdominal interventions. The previous determination of ureteral length helps pre-operatory planning of surgeries, reduces costs of auxiliary exams, the correct choice of double-J catheter with low morbidity and fewer symptoms, and an adequate adhesion to treatment. Objective To evaluate ureteral length in adult cadavers and to analyze its correlation with anthropometric measures. Materials and Methods: From April 2009 to January 2012 we determined ureteral length of adult cadavers submitted to necropsy and obtained the following measures: height, distance from shoulder to wrist, elbow-wrist, xiphoid appendix-umbilicus, umbilicus-pubis, xiphoid appendix-pubis and between iliac spines. We analyzed the correlations between ureteral length and those anthropometric measures. Results We dissected 115 ureters from 115 adult corpses from April 2009 to January 2012. Median ureteral length didn't vary between sexes or according to height. It was observed no correlation among ureteral length and all considered anthropometric measures in all analyzed subgroups and in general population. There were no significant differences between right and left ureteral measures. Conclusions There is no difference of ureteral length in relation to height or gender (male or female. There is no significant correlation among ureteral length and the considered anthropometric measures.

  13. 7 CFR 29.6024 - Length.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Length. 29.6024 Section 29.6024 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6024 Length. The linear measurement of cured tobacco leaves from...

  14. Biofuel on contaminated land

    Science.gov (United States)

    Suer, Pascal; Andersson-Sköld, Yvonne; Blom, Sonja; Bardos, Paul; Polland, Marcel; Track, Thomas

    2010-05-01

    Desktop studies of two Swedish contaminated sites has indicated that growing biofuel crops on these sites may be more environmentally beneficial than alternative risk management approaches such as excavation / removal or containment The demand for biofuel increases pressure on the cultivatable soil of the world. While contaminated land is not very suitable for food production, cultivation of low and medium contaminated soil may remove some pressure from agricultural soils. For larger sites, biofuel cultivation may be economically viable without a remediation bonus. Suitable sites have topographic conditions that allow agricultural machinery, are not in urgent need of remediation, and contamination levels are not plant toxic. Life cycle assessment (LCA) was done for two cases. The (desk top) case studies were - Case K, a 5000 m2 site where salix (willow) was cultivated with hand-held machinery and the biofuel harvest was left on site, and - Case F, a 12 ha site were on site ensuring was being considered, and were salix might have rented an economic profit if the remediation had not been urgent due to exploitation pressure. Some selected results for biofuel K; biofuel F; excavation K; and on site ensuring F respectively: Energy: 0,05; 1,4; 3,5; 19 TJ Waste: 1; 9; 1200; 340 ton Land use off-site: 190; 3 500; 200 000; 1 400 000 m² a Global warming: 3; 86; 230; 1 200 ton CO2 eq Acidification: 25; 1 000; 2 600; 14 000 kg SO2 eq Photochemical smog: 10; 180; 410; 2 300 kg ethene eq Human health: 2; 51; 150; 620 index The environmental impact of the traditional remediation methods of excavation and on-site ensuring was mainly due to the transport of contaminated soil and replacement soil, and landfilling of the contaminated soil. Biofuel cultivation avoids these impacts, while fertiliser production and agricultural machinery would have a lower environmental impact than moving large volumes of soil around. Journeys of a controller to check on the groundwater quality also

  15. Length contraction in Very Special Relativity

    CERN Document Server

    Dutta, Biplab

    2011-01-01

    Glashow and Cohen claim that many results of special theory of relativity (SR) like time dilation, relativistic velocity addition, etc, can be explained by using certain proper subgroups, of the Lorentz group, which collectively form the main body of Very special relativity (VSR). They did not mention about length contraction in VSR. Length contraction in VSR has not been studied at all. In this article we calculate how the length of a moving rod contracts in VSR, particularly in the HOM(2) version. The results are interesting in the sense that in general the length contraction formulas in VSR are different from SR but in many cases the two theories predict similar length contraction of moving rods.

  16. Screening length in dusty plasma crystals

    Science.gov (United States)

    Nikolaev, V. S.; Timofeev, A. V.

    2016-11-01

    Particles interaction and value of the screening length in dusty plasma systems are of great interest in dusty plasma area. Three inter-particle potentials (Debye potential, Gurevich potential and interaction potential in the weakly collisional regime) are used to solve equilibrium equations for two dusty particles suspended in a parabolic trap. The inter-particle distance dependence on screening length, trap parameter and particle charge is obtained. The functional form of inter-particle distance dependence on ion temperature is investigated and compared with experimental data at 200-300 K in order to test used potentials applicability to dusty plasma systems at room temperatures. The preference is given to the Yukawa-type potential including effective values of particle charge and screening length. The estimated effective value of the screening length is 5-15 times larger than the Debye length.

  17. Variable length representation in evolutionary electronics.

    Science.gov (United States)

    Zebulum, R S; Pacheco, M A; Vellasco, M

    2000-01-01

    This work investigates the application of variable length representation (VLR) evolutionary algorithms (EAs) in the field of Evolutionary Electronics. We propose a number of VLR methodologies that can cope with the main issues of variable length evolutionary systems. These issues include the search for efficient ways of sampling a genome space with varying dimensionalities, the task of balancing accuracy and parsimony of the solutions, and the manipulation of non-coding segments. We compare the performance of three proposed VLR approaches to sample the genome space: Increasing Length Genotypes, Oscillating Length Genotypes, and Uniformly Distributed Initial Population strategies. The advantages of reusing genetic material to replace non-coding segments are also emphasized in this work. It is shown, through examples in both analog and digital electronics, that the variable length genotype's representation is natural to this particular domain of application. A brief discussion on biological genome evolution is also provided.

  18. Salmonella contamination of cereal ingredients for animal feeds.

    Science.gov (United States)

    Davies, R H; Wales, A D

    2013-10-25

    Cereal ingredients for animal feedstuffs may become contaminated by Salmonella on their farms of origin. This is often concentrated in multiple foci, owing to contamination by rodents and other wildlife which may be missed by routine sampling, and may involve serovars of particular public health significance, such as Salmonella Typhimurium (STM). The study examined such contamination in domestically-produced cereal ingredients in the United Kingdom. Cereal-producing farms with associated cattle or pig enterprises (43) and feedmills (6) were investigated, following the isolation of STM from their premises (feedmills) or STM DT104 from their livestock (farms) by routine surveillance. Cereal samples from feedmills yielded two STM isolates from the same premises, of the same phage types as were isolated from wild bird faeces at ingredient intake and product loading areas. Farm investigations identified numerous Salmonella serovars, including STM, on grain harvesting and handling equipment, in grain storage areas, and in wildlife samples. Mice were removed from one pig farm and shed Salmonella Derby and Salmonella Bovismorbificans for 10 months afterwards. Grain stores more than one kilometre away from livestock areas were rarely found to be contaminated with STM. The principal issues with Salmonella contamination of cereals appeared to be the use of livestock areas as temporary grain stores on cattle farms, and access to stored grain by wildlife and domestic animals. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  19. Remediation of PCB contaminated soils at Saglek, Labrador

    Energy Technology Data Exchange (ETDEWEB)

    Maskell, B.; Bordin, D. [Bennett Environmental Inc., Oakville, ON (Canada)

    2005-07-01

    Polychlorinated biphenyl (PCB) contaminated soils were discovered in Saglek in 1986. This paper describes a contract awarded to Bennett Environmental Inc., by the Department of National Defense for the removal of all contaminated soils and debris in the area. Key tasks included removal of all stockpiles of PCB contaminated soil; collection, cleaning and sorting of debris for containerization and removal; remediation of potential contaminated soils beneath the stockpiles; and reinstatement of the staging and clean stone deposition zone area to its natural state. Planning of the project was outlined, including details of partnering sessions and workshops, as well as details of community meetings held in Nain. Details of startup and pre-environmental monitoring were also provided. An outline of the containerization unit used during the project was presented, as well as ship cycle times and soil sampling procedures. Washing and water treatment procedures were reviewed, as well as details of the on-site laboratory, equipped with personal exposure monitoring; an ambient air monitoring network; water sampling and analysis; and continuous monitoring to assess potential exposure to PCB to conform to alarm levels and implement mitigation measures. Shipping procedures were reviewed as well as soil treatment processes at a facility in Cornwall, Ontario. It was concluded that the remediation of the site was successful. All contaminated material was removed and treated. 1 ref., 4 figs.

  20. THE IMPACTS OF WINTER MAINTENANCE EQUIPMENT ON VEHICLE DELAY ON INTERSTATES

    Directory of Open Access Journals (Sweden)

    William A. Holik

    2015-09-01

    Full Text Available This paper evaluates the impacts of specialty winter maintenance equipment on vehicle delay by fusing Bluetooth speed, weather, and winter maintenance treatment data. A specialty plow capable of plowing two lanes in one pass is compared to a standard winter maintenance truck that plows and treats one lane per pass. Each type of equipment is analyzed on the same two-lane interstate highway, with the two trucks maintaining different sections to avoid cross contamination. The researchers deployed multiple Bluetooth nodes along the roadway to capture vehicle speeds during maintenance activities. The cumulative delay per mile is compared for the two trucks during light and heavy snowfall. The times when delay occurs are grouped into five-minute intervals for two scenarios including when the winter maintenance equipment has just passed through a Bluetooth node segment and for all recently-treated segments after the equipment has exited the highway. The results indicated the specialty plow creates a larger delay than the standard truck when plowing two lanes and a similar delay when plowing one lane and the shoulder. However, when looking solely at heavy snowfall, the delay is similar for each type of equipment, indicating the specialty plow is more effective during heavy snowfall.

  1. Waste Handling Equipment Devleopment Test and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    R.L. Tome

    1998-12-01

    The purpose of this study is to identify candidate Monitored Geologic Repository (MGR) surface waste handling equipment for development testing. This study will also identify strategies for performing the development tests. Development testing shall be implemented to support detail design and reduce design risks. Development testing shall be conducted to confirm design concepts, evaluate alternative design concepts, show the availability of needed technology, and provide design documentation. The candidate equipment will be selected from MGR surface waste handling equipment that is the responsibility of the Management and Operating Contractor (M&O) Surface Design Department. The equipment identified in this study is based on Viability Assessment (VA) design. The ''Monitored Geologic Repository Test and Evaluation Plan'' (MGR T&EP), Reference 5.1, was used as a basis for this study. The MGR T&EP reflects the extent of test planning and analysis that can be conducted, given the current status of the MGR requirements and latest VA design information. The MGR T&EP supports the appropriate sections in the license application (LA) in accordance with 10 CFR 60.2 1(c)(14). The MGR T&EP describes the following test activities: site characterization to confirm, by test and analysis, the suitability of the Yucca Mountain site for housing a geologic repository; development testing to investigate and document design concepts to reduce risk; qualification testing to verify equipment compliance with design requirements, specifications, and regulatory requirements; system testing to validate compliance with MGR requirements, which include the receipt, handling, retrieval, and disposal of waste; periodic performance testing to verify preclosure requirements and to demonstrate safe and reliable MGR operation; and performance confirmation modeling, testing, and analysis to verify adherence to postclosure regulatory requirements. Development test activities can be

  2. Gasp. Contamination study

    Energy Technology Data Exchange (ETDEWEB)

    Malaker, S.F.; Anderson, C.J.; Rossi, R.A.

    1961-01-01

    Calculations and analyses were performed to evaluate the radiological hazards associated with the use of a contained underground fission detonation for the propulsion of large space platforms. This investigation included a study of fission product release, neutron induced activity, ground water contamination, chemical reactions, decontamination and closure mechanisms. Analytical results, representing extreme conditions, were obtained for a defined reference system. The key to control of the environmental hazard in the GASP system is the closure mechanism - if operating properly, the radiological hazard is acceptable but upon failure, the hazard may be substantial.

  3. Solutions Remediate Contaminated Groundwater

    Science.gov (United States)

    2010-01-01

    During the Apollo Program, NASA workers used chlorinated solvents to clean rocket engine components at launch sites. These solvents, known as dense non-aqueous phase liquids, had contaminated launch facilities to the point of near-irreparability. Dr. Jacqueline Quinn and Dr. Kathleen Brooks Loftin of Kennedy Space Center partnered with researchers from the University of Central Florida's chemistry and engineering programs to develop technology capable of remediating the area without great cost or further environmental damage. They called the new invention Emulsified Zero-Valent Iron (EZVI). The groundwater remediation compound is cleaning up polluted areas all around the world and is, to date, NASA's most licensed technology.

  4. Length-free near infrared measurement of newborn malnutrition

    Science.gov (United States)

    Mustafa, Fatin Hamimi; Bek, Emily J.; Huvanandana, Jacqueline; Jones, Peter W.; Carberry, Angela E.; Jeffery, Heather E.; Jin, Craig T.; McEwan, Alistair L.

    2016-11-01

    Under-nutrition in neonates can cause immediate mortality, impaired cognitive development and early onset adult disease. Body fat percentage measured using air-displacement-plethysmography has been found to better indicate under-nutrition than conventional birth weight percentiles. However, air-displacement-plethysmography equipment is expensive and non-portable, so is not suited for use in developing communities where the burden is often the greatest. We proposed a new body fat measurement technique using a length-free model with near-infrared spectroscopy measurements on a single site of the body - the thigh. To remove the need for length measurement, we developed a model with five discrete wavelengths and a sex parameter. The model was developed using air-displacement-plethysmography measurements in 52 neonates within 48 hours of birth. We identified instrumentation required in a low-cost LED-based screening device and incorporated a receptor device that can increase the amount of light collected. This near-infrared method may be suitable as a low cost screening tool for detecting body fat levels and monitoring nutritional interventions for malnutrition in neonates and young children in resource-constrained communities.

  5. Double tube heat exchanger with novel enhancement: Part I - flow development length and adiabatic friction factor

    Energy Technology Data Exchange (ETDEWEB)

    Tiruselvam, R.; Raghavan, Vijay R. [Universiti Teknologi PETRONAS, Faculty of Mechanical Engineering, Tronoh (Malaysia)

    2012-04-15

    The study is conducted to evaluate the flow characteristics in a double tube heat exchanger using two new and versatile enhancement configurations. The novelty is that they are usable in single phase forced convection, evaporation and condensation. Correlations are proposed for flow development length and friction factor for use in predicting fluid pumping power in thermal equipment as well as in subsequent heat transfer characterization of the surface. (orig.)

  6. PROBLEMS PERTAINING TO DIVERSIFICATION OF CIVIL EQUIPMENT IN EQUIPMENT OF MILITARY PURPOSE

    Directory of Open Access Journals (Sweden)

    A. I. Kotlabay

    2009-01-01

    Full Text Available Study of directions concerning development of military equipment, its modernization with the purpose to improve its military efficiency is an actual problem for the Armed Forces, military science, designers and researchers.The paper analyzes and estimates possibilities to use civil equipment for military purpose. Problems pertaining to technologies of double application, diversification of civil equipment in military engineering machinery are considered in the paper.

  7. Kidney Length in Normal Korean Children

    Energy Technology Data Exchange (ETDEWEB)

    Kim, In One; Cheon, Jung Eun [Seoul National University College of Medicine, Seoul (Korea, Republic of); Lee, Young Seok [Dankook University College of Medicine, Cheonan (Korea, Republic of); Lee, Sun Wha [Ewha Womans University College of Medicine, Seoul (Korea, Republic of); Kim, Ok Hwa [Ajou University College of Medicine, Suwon (Korea, Republic of); Kim, Ji Hye [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of); Kim, Hong Dae [Kangnam Sacred Heart Hospital, Hanllym University College of Medicine, Seoul (Korea, Republic of); Sim, Jung Suk [Mothers Clinic, Bundang, Seongnam (Korea, Republic of)

    2010-09-15

    Renal length offers important information to detect or follow-up various renal diseases. The purpose of this study was to determine the kidney length of normal Korean children in relation to age, height, weight, body surface area (BSA), and body mass index (BMI). Children between 1 month and 15 years of age without urological abnormality were recruited. Children below 3rd percentile and over 97th percentile for height or weight were excluded. Both renal lengths were measured in the prone position three times and then averaged by experienced radiologists. The mean length and standard deviation for each age group was obtained, and regression equation was calculated between renal length and age, weight, height, BSA, and BMI, respectively. Renal length was measured in 550 children. Renal length grows rapidly until 24 month, while the growth rate is reduced thereafter. The regression equation for age is: renal length (mm) = 45.953 + 1.064 x age (month, {<=} 24 months) (R2 = 0.720) or 62.173 + 0.203 x age (months, > 24 months) (R2 = 0.711). The regression equation for height is: renal length (mm) = 24.494 + 0.457 x height (cm) (R2 = 0.894). The regression equation for weight is: renal length (mm) = 38.342 + 2.117 x weight (kg, {<=}18 kg) (R2 = 0.852) or 64.498 + 0.646 x weight (kg, > 18 kg) (R2 = 0.651). The regression equation for BSA is: renal length (mm) = 31.622 + 61.363 x BSA (m2, {<=} 0.7) (R2 = 0.857) or 52.717 + 29.959 x BSA (m2, > 0.7) (R2 = 0.715). The regression equation for BMI is: renal length (mm) = 44.474 + 1.163 x BMI (R2 = 0.079). This study provides data on the normal renal length and its association with age, weight, height, BSA and BMI. The results of this study will guide the detection and follow-up of renal diseases in Korean children

  8. Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management.

    Science.gov (United States)

    Schlummer, Martin; Gruber, Ludwig; Mäurer, Andreas; Wolz, Gerd; van Eldik, Rudi

    2007-04-01

    There is an increasing interest in the end-of-life management of polymers present in waste electrical and electronic equipment (WEEE). This is mainly due to high recycling and recovery quotas set by the European WEEE directive, which can only be fulfilled by including the plastic fraction in recycling and recovery approaches. Previous studies identified a high material diversity and various contaminants in WEEE plastics, including heavy metals, polybrominated biphenyls (PBB), diphenyl ethers (PBDE), as well as polybrominated dibenzodioxins and dibenzofurans (PBDD/F). These substances are regulated by European directives that limit their levels in marketable products. Consequently, both material diversity and contaminants are strong arguments against material recycling and point to hazardous waste treatment. However, recent developments in the production of flame retardants and electrical and electronic goods aimed to reduce contaminants and material diversity. Thus, the present study summarises updated contaminant levels of plastic fractions of European WEEE, as well as data on materials in waste housing polymers. Material characterisation revealed housing fractions to be interesting sources for polymer recycling, which however has to implement potent material separation and/or bromine elimination techniques. With respect to contaminants, our data indicate an effective phase-out of PBB, but still high levels of PBDE and PBDD/F are found. Sources and implications for the material recycling and thermal recovery approaches are discussed in detail.

  9. Analysis of the Improvement Methods for Equipment Maintenance Support

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rui-chang; ZHAO Song-zheng

    2005-01-01

    According to military requirement, and based on the problems of equipment maintenance support methods in high-tech battles, each element supporting equipment maintenance is analyzed, and the methods for improving equipment maintenance are proposed.

  10. 47 CFR 36.126 - Circuit equipment-Category 4.

    Science.gov (United States)

    2010-10-01

    ... equipment. (6) Composite sets and repeating coils. (7) Program transmission amplifiers, monitoring devices... equipment is general use, while audio program transmission amplifiers, bridges, monitoring devices and... jurisdictions shall be updated annually. Information Origination/Termination (IOT) Equipment...

  11. Restoration of contaminated sites in the project PIMIC decommissioning. The case of the lentil; Restauracion de terrenos contaminados en el proyecto PIMIC desmantelamiento. El caso de la lenteja

    Energy Technology Data Exchange (ETDEWEB)

    Medina Tellez, G.

    2010-07-01

    During execution PIMIC Decommissioning Project at CIEMAT has detected the existence of contaminated sites in some parts of the area affected by the project. The inclusion within the scope of this project, decontamination, involves dealing with special challenges, as to what are the decommissioning of contaminated systems and equipment in buildings.

  12. Molecular contamination modeling with CTSP

    Science.gov (United States)

    Brieda, Lubos

    2016-11-01

    Spacecraft instruments and thermal control surfaces are generally highly sensitive to molecular and particulate contamination. Despite best efforts taken during assembly, integration, and test, it is impossible to completely eliminate all sources of contaminants. Contamination transport analysis then becomes of critical importance. It can be used to predict the end of life accumulation on critical surfaces from prescribed source rates. Conversely, given allowable deposition levels, contamination modeling can be used to determine the cleanliness requirements to be met prior to launch. This paper describes a recently developed code for modeling contamination transport. Unlike other tools used by the community, CTSP concurrently traces many simulation particles through small time steps. This allows the code to visualize contaminant partial pressures, and to also include aerodynamic, gravitation, or electrostatic forces. The code is demonstrated by simulating an outgassing characterization test in a bell jar.

  13. The differential relationship between mental contamination and the core dimensions of contact contamination fear.

    Science.gov (United States)

    Melli, Gabriele; Bulli, Francesco; Carraresi, Claudia; Tarantino, Federica; Gelli, Simona; Poli, Andrea

    2017-01-01

    Two types of contamination fear are recognized: contact and mental contamination. Contact contamination appears to be motivated both by harm avoidance and disgust avoidance. This study aimed to examine the relationships between disgust propensity, mental contamination and contact contamination while differentiating between harm avoidance and disgust avoidance in contact contamination. 169 OCD patients completed a set of questionnaires assessing mental contamination, contact contamination, disgust propensity, OCD, anxiety and depression. 1) Contact contamination based on disgust avoidance was more strongly associated with mental contamination and disgust propensity than contact contamination based on harm avoidance; 2) mental contamination significantly predicted contact contamination based on disgust avoidance, while it did not predict contact contamination based on harm avoidance; 3) mental contamination had a significant mediational role in the relationship between disgust propensity and contact contamination motivated by disgust avoidance. Mental contamination plays a role in contact contamination fear when disgust is primarily experienced. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Explosive Contamination from Substrate Surfaces: Differences and Similarities in Contamination Techniques using RDX and C-4

    Energy Technology Data Exchange (ETDEWEB)

    C.J. Miller; T.S. Yoder

    2010-06-01

    The amount of time that an explosive is present on the surface of a material is dependent upon the original amount of explosive on the surface, temperature, humidity, rain, etc. This laboratory study focused on looking at similarities and differences in three different surface contamination techniques that are used when performance testing explosive trace detection equipment in an attempt to determine how effective the techniques are at replicating actual field samples. The three techniques used were dry transfer deposition of solutions using the Transportation Security Laboratory (TSL) patented dry transfer techniques (US patent 6470730), direct deposition of explosive standards, and fingerprinting of actual explosives. Explosives were deposited on the surface of one of five substrates using one of the three different deposition techniques. The process was repeated for each surface type using each contamination technique. The surface types used were: 50% cotton/50% polyester as found in T-shirts, 100% cotton with a smooth surface such as that found in a cotton dress shirt, 100% cotton on a rough surface such as that found on canvas or denim, suede leather such as might be found on jackets, purses, or shoes, and metal obtained from a car hood at a junk yard. The samples were not pre-cleaned prior to testing and contained sizing agents, and in the case of the metal, oil and dirt. The substrates were photographed using a Zeiss Discover V12 stereoscope with Axiocam ICc1 3 megapixel digital camera to determine the difference in the crystalline structure and surface contamination in an attempt to determine differences and similarities associated with current contamination techniques.

  15. Inproved grade length limitation of freeways

    Institute of Scientific and Technical Information of China (English)

    XING En-hui; PEI Yu-long

    2006-01-01

    A method of ascertaining grade length limitation of freeways in mountain terrain is presented. The relationship models between 15th percentile speeds and grades were built through the surveys and analyses of operation speeds on 7 typical sections of 3 freeways in mountain terrain. Using 15th percentile and 85th percentile as speed limitations, the methods of determining admitted velocities were put forward according to the grades. Deceleration distances of longitudinal slopeways were analyzed utilizing the theories of vehicle. According to the results of analysis, grade length limitation was loosed. Finally the values of grade length limitation for freeways were put forward. The results could be used as references for freeway design.

  16. Scattering lengths of calcium and barium isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Dammalapati, U.; Willmann, L.; Knoop, S. [Kernfysisch Versneller Instituut (KVI), University of Groningen, Zernikelaan 25, 9747 AA Groningen (Netherlands); LaserLaB Vrije Universiteit, De Boelelaan 1081, 1081 HV Amsterdam (Netherlands)

    2011-11-15

    We have calculated the s-wave scattering length of all the even isotopes of calcium (Ca) and barium (Ba) in order to investigate the prospect of Bose-Einstein condensation (BEC). For Ca we have used an accurate molecular potential based on detailed spectroscopic data. Our calculations show that Ca does not provide other isotopes alternative to the recently Bose condensed {sup 40}Ca that suffers strong losses because of a very large scattering length. For Ba we show by using a model potential that the even isotopes cover a broad range of scattering lengths, opening the possibility of BEC for at least one of the isotopes.

  17. The tree length of an evolving coalescent

    CERN Document Server

    Pfaffelhuber, Peter; Weisshaupt, Heinz

    2009-01-01

    A well-established model for the genealogy of a large population in equilibrium is Kingman's coalescent. For the population together with its genealogy evolving in time, this gives rise to a time-stationary tree-valued process. We study the sum of the branch lengths, briefly denoted as tree length, and prove that the (suitably compensated) sequence of tree length processes converges, as the population size tends to infinity, to a limit process with cadlag paths, infinite infinitesimal variance, and a Gumbel distribution as its equilibrium.

  18. Stylish lengths: Mate choice in flowers

    Indian Academy of Sciences (India)

    B T Ramesha; M D Yetish; G Ravikanth; K N Ganeshaiah; Jaboury Ghazoul; R Uma Shaanker

    2011-06-01

    The styles of flowers may represent an arena for pollen competition in the race to fertilize ovules. Accordingly, selection should favour a longer ‘race’ to better discriminate among variable pollen by increasing style length. Sampling across a taxonomically diverse range of wild and outcrossed species, we found that the distribution of style lengths within plants were skewed towards longer styles, as predicted. In self-pollinated domesticated species, where discrimination among pollen is less important, we found no such pattern. We conclude that style length is under directional selection towards longer styles as a mechanism for mate choice among pollen of variable quality.

  19. Bunch Length Measurements in SPEAR3

    Energy Technology Data Exchange (ETDEWEB)

    Corbett, W.J.; Fisher, A.; Huang, X.; Safranek, J.; Sebek, J.; /SLAC; Lumpkin, A.; /Argonne; Sannibale, F.; /LBL, Berkeley; Mok, W.; /Unlisted

    2007-11-28

    A series of bunch length measurements were made in SPEAR3 for two different machine optics. In the achromatic optics the bunch length increases from the low-current value of 16.6ps rms to about 30ps at 25ma/bunch yielding an inductive impedance of -0.17{Omega}. Reducing the momentum compaction factor by a factor of {approx}60 [1] yields a low-current bunch length of {approx}4ps rms. In this paper we review the experimental setup and results.

  20. Resistance welding equipment manufacturing capability for exports

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, V.S.; Raju, Y.S.; Somani, A.K.; Setty, D.S.; Rameswara Raw, A.; Hermantha Rao, G.V.S.; Jayaraj, R.N. [Nuclear Fuel Complex, Dept. of Atomic Energy, Hyderbad (India)

    2010-07-01

    Indian Pressurised Heavy Water Reactor (PHWR) fuel bundle is fully welded and is unique in its design. Appendage welding, end closure welding, and end plate welding is carried out using resistance welding technique. Out of many joining processes available, resistance-welding process is reliable, environment friendly and best suitable for mass production applications. Nuclear Fuel Complex (NFC), an industrial unit is established in Hyderabad, under the aegis of the Dept of Atomic Energy to manufacture fuel for Pressurised Heavy Water Reactors. From inception, NFC has given importance for self-reliance and indigenization with respect to manufacturing process and equipment. Sintering furnaces, centreless grinders, appendage-welding machines, end-closure welding equipment and end-plate welding equipments, which were initially imported, are either indigenized or designed and manufactured in house. NFC has designed, manufactured a new appendage-welding machine for manufacturing 37 element fuel bundles. Recently NFC has bagged an order from IAEA through international bidding for design, manufacture, supply, erection and commissioning of end-closure welding equipment. The paper gives in detail the salient features of these welding equipment. (author)

  1. Energy Recovery from Contaminated Biomass

    Directory of Open Access Journals (Sweden)

    Jiří Moskalík

    2012-01-01

    Full Text Available This study focuses on thermal gasification methods of contaminated biomass in an atmospheric fluidized bed, especially biomass contaminated by undesirable substances in its primary use. For the experiments, chipboard waste was chosen as a representative sample of contaminated biomass. In the experiments, samples of gas and tar were taken for a better description of the process of gasifying chipboard waste. Gas and tar samples also provide information about the properties of the gas that is produced.

  2. Mining equipment manufacturers: an industry sector analysis; 14th edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report analyses and compares the financial ratios of mining equipment manufacturers in the United Kingdom. It includes companies who produce equipment for the mining industry such as cutting tools, drilling equipment, crushers, screens, centrifuges, tunnelling equipment, conveyors and other materials handling equipment, hydraulic equipment, filtration, pumping and mixing equipment and ventilation equipment. The report presents business ratios analysing profitability, efficiency, liquidity, employee-based ratios and a series of figures on growth rate. Accounting data for the individual companies are given, together with principal ratios, areas of activity, names of directors and company secretary, trading address and holding companies.

  3. Phytotechnologies: remediation of environmental contaminants

    National Research Council Canada - National Science Library

    Anjum, Naser A

    2013-01-01

    .... The book offers an evaluation of the known plant species for their different roles in phytotechnological applications in relation to remediation of varied environmental contaminants and also explores...

  4. Efficiency of cleaning procedure of milking equipment and bacterial quality of milk

    Directory of Open Access Journals (Sweden)

    Anna Sandrucci

    2010-01-01

    Full Text Available The cleaning and sanitation of milking equipment could be consider a critical point in the milking procedure because a cleaning failure could influence the level of bacteria contamination of bulk tank milk. Aim of the study is to monitor the cleaning procedures of milking systems in 7 dairy cows farms in Lombardy and to find a relation between efficacy of cleaning system and the bacterial quality of bulk tank milk, remaining washing water through milking equipment and teat cup surface. Cleaning procedures were monitored with Lactocorder, that measured: duration, water temperature, turbulence, percentage of water in pipes, water conductivity of pre- and post-rinse and detergent phases. Results showed that the monitored farms the most of the cleaning parameters were lower than recommendations, in particular maximum water temperature (42.1±9.9°C and percentage of water during detergent phase (76.1±13.9 %. A maximum temperature of detergent phase <40°C determined a high Standard Plate Count (SPC, thermoduric bacteria and Coliform Count (CC of bulk tank milk, SPC and CC of teat cup surface. The research indicated that monitoring the efficiency of cleaning milking equipment with proper tools provide useful information about possible sources of contamination of bulk tank milk. Improving cleaning milking efficiency allow to improve milk quality.

  5. Development of nuclear equipment qualification technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

    1999-03-01

    In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

  6. Liver enzymes among microelectronics equipment maintenance technicians.

    Science.gov (United States)

    Upfal, M

    1992-04-01

    Equipment maintenance workers within the microelectronics industry have opportunities for occupational exposure to a variety of toxic agents. This pilot investigation compares liver enzymes in this population with that of other coworkers. Participants (n = 135) were randomly selected from a medical surveillance program at the manufacturing facility. Nine job categories were examined, including equipment maintenance workers and electronic technicians. Although abnormal liver enzymes were detected among equipment maintenance workers (odds ratio 16.4; P less than .008) and electronic technicians (odds ratio 27; P less than .0005), the numbers of participants were small (n = 8, 10). The data suggest that independent and/or interactive etiologic roles of occupation and alcohol should be further investigated. Early detection of subclinical occupational or recreational hepatotoxicity with appropriate employment of industrial hygiene control technology and/or the reduction of alcohol consumption may provide a means of preventing liver disease.

  7. Emission of chemical substances from office equipment

    Directory of Open Access Journals (Sweden)

    Joanna Kowalska

    2012-12-01

    Full Text Available A number of potentially harmful pollutants are emitted from office equipment. Printers and copiers are sources of volatile organic compounds (VOC, which at least partly, are generated from the heated toner and paper dust during printing process. Benzene, toluene, ethylbenzene, xylenes, styrene, and formaldehyde were detected in the blended emissions emitted from printing devices. Office printing devices are recognized to be the major sources of indoor fine and ultrafine aerosol particles. The emissions of certain pollutants from office equipment may be at relatively low level compared to other known sources (e.g. building materials. However, office equipment is potentially the important source of human exposure due to the short distance for the people operating them both at home and in the office.

  8. LESSONS LEARNED IN TESTING OF SAFEGUARDS EQUIPMENT.

    Energy Technology Data Exchange (ETDEWEB)

    PEPPER,S.; FARNITANO,M.; CARELLI,J.; HAZELTINE,J.; BAILEY,D.

    2001-10-29

    The International Atomic Energy Agency's (IAEA) Department of Safeguards uses complex instrumentation for the application of safeguards at nuclear facilities around the world. Often, this equipment is developed through cooperation with member state support programs because the Agency's requirements are unique and are not met by commercially available equipment. Before approving an instrument or system for routine inspection use, the IAEA subjects it to a series of tests designed to evaluate its reliability. In 2000, the IAEA began to observe operational failures in digital surveillance systems. In response to the observed failures, the IAEA worked with the equipment designer and manufacturer to determine the cause of failure. An action plan was developed to correct the performance issues and further test the systems to make sure that additional operational issues would not surface later. This paper addresses the steps taken to address operation issues related to digital image surveillance systems and the lessons learned during this process.

  9. CPS Trawl Life History Length Frequency Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Length distribution of a subset of individuals from a species (mainly non-target) caught during SWFSC-FRD fishery independent trawl surveys of coastal pelagic...

  10. Length and coverage of inhibitory decision rules

    KAUST Repository

    Alsolami, Fawaz

    2012-01-01

    Authors present algorithms for optimization of inhibitory rules relative to the length and coverage. Inhibitory rules have a relation "attribute ≠ value" on the right-hand side. The considered algorithms are based on extensions of dynamic programming. Paper contains also comparison of length and coverage of inhibitory rules constructed by a greedy algorithm and by the dynamic programming algorithm. © 2012 Springer-Verlag.

  11. Process for fabricating continuous lengths of superconductor

    Science.gov (United States)

    Kroeger, Donald M.; List, III, Frederick A.

    1998-01-01

    A process for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor precursor between said first substrate ribbon and said second substrates ribbon. The layered superconductor precursor is then heat treated to form a super conductor layer.

  12. Fragment Length of Circulating Tumor DNA.

    Directory of Open Access Journals (Sweden)

    Hunter R Underhill

    2016-07-01

    Full Text Available Malignant tumors shed DNA into the circulation. The transient half-life of circulating tumor DNA (ctDNA may afford the opportunity to diagnose, monitor recurrence, and evaluate response to therapy solely through a non-invasive blood draw. However, detecting ctDNA against the normally occurring background of cell-free DNA derived from healthy cells has proven challenging, particularly in non-metastatic solid tumors. In this study, distinct differences in fragment length size between ctDNAs and normal cell-free DNA are defined. Human ctDNA in rat plasma derived from human glioblastoma multiforme stem-like cells in the rat brain and human hepatocellular carcinoma in the rat flank were found to have a shorter principal fragment length than the background rat cell-free DNA (134-144 bp vs. 167 bp, respectively. Subsequently, a similar shift in the fragment length of ctDNA in humans with melanoma and lung cancer was identified compared to healthy controls. Comparison of fragment lengths from cell-free DNA between a melanoma patient and healthy controls found that the BRAF V600E mutant allele occurred more commonly at a shorter fragment length than the fragment length of the wild-type allele (132-145 bp vs. 165 bp, respectively. Moreover, size-selecting for shorter cell-free DNA fragment lengths substantially increased the EGFR T790M mutant allele frequency in human lung cancer. These findings provide compelling evidence that experimental or bioinformatic isolation of a specific subset of fragment lengths from cell-free DNA may improve detection of ctDNA.

  13. Fragment Length of Circulating Tumor DNA.

    Science.gov (United States)

    Underhill, Hunter R; Kitzman, Jacob O; Hellwig, Sabine; Welker, Noah C; Daza, Riza; Baker, Daniel N; Gligorich, Keith M; Rostomily, Robert C; Bronner, Mary P; Shendure, Jay

    2016-07-01

    Malignant tumors shed DNA into the circulation. The transient half-life of circulating tumor DNA (ctDNA) may afford the opportunity to diagnose, monitor recurrence, and evaluate response to therapy solely through a non-invasive blood draw. However, detecting ctDNA against the normally occurring background of cell-free DNA derived from healthy cells has proven challenging, particularly in non-metastatic solid tumors. In this study, distinct differences in fragment length size between ctDNAs and normal cell-free DNA are defined. Human ctDNA in rat plasma derived from human glioblastoma multiforme stem-like cells in the rat brain and human hepatocellular carcinoma in the rat flank were found to have a shorter principal fragment length than the background rat cell-free DNA (134-144 bp vs. 167 bp, respectively). Subsequently, a similar shift in the fragment length of ctDNA in humans with melanoma and lung cancer was identified compared to healthy controls. Comparison of fragment lengths from cell-free DNA between a melanoma patient and healthy controls found that the BRAF V600E mutant allele occurred more commonly at a shorter fragment length than the fragment length of the wild-type allele (132-145 bp vs. 165 bp, respectively). Moreover, size-selecting for shorter cell-free DNA fragment lengths substantially increased the EGFR T790M mutant allele frequency in human lung cancer. These findings provide compelling evidence that experimental or bioinformatic isolation of a specific subset of fragment lengths from cell-free DNA may improve detection of ctDNA.

  14. Derived length for arbitrary topological spaces

    Directory of Open Access Journals (Sweden)

    A. J. Jayanthan

    1992-01-01

    Full Text Available The notion of derived length is as old as that of ordinal numbers itself. It is also known as the Cantor-Bendixon length. It is defined only for dispersed (that is scattered spaces. In this paper this notion has been extended in a natural way for all topological spaces such that all its pleasing properties are retained. In this process we solve a problem posed by V. Kannan. ([1] Page 158.

  15. Planning and Selection of Heavy Construction Equipment in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Mr. Nilesh D. Chinchore

    2014-04-01

    Full Text Available Construction equipment planning and selection plays crucial role for the success of construction firms.Inadequate manual processes of equipmentplanning and selection and the subjective decisions of equipment managers usually result in major losses in construction firms. An indispensable item of resources, it produces output at accelerated speed, enables completion of task in limited time. Equipment saves manpower, which is becoming costly and more demanding day by day. Equipment improves quality, productivity and safety. Construction equipment planning aims at identifying construction equipment for executing project tasks, assessing equipment performance capability, forecasting date wise requirement of number and type of equipment and finally participating in the selection of equipment to be acquired. To derive full benefits from the equipment, there should be proper selection and good planning of its operations. This paper deals with the planning and selection procedure for equipment adopted by a company to achieve its objective of timely project completion.

  16. Measuring and Test Equipment through barcode technology

    Energy Technology Data Exchange (ETDEWEB)

    Crockett, J.D.; Carr, C.C.

    1993-06-01

    Over the past several years, the use, trace methodology, and documentation of Measuring and Test Equipment has become a major concern. Current regulations are forcing companies to develop new policies, providing use history and traceability of Measuring and Test Equipment. The US Department of Energy and Environmental Organizations are driving Westinghouse Hanford Company to comply with the more stringent environmental guidelines and recent modifications in Department of Energy Orders. This paper discusses how the Fast Flux Test Facility at Westinghouse Hanford Company overcame these obstacles by using a computerized system through barcode technology.

  17. Conceptual design report, CEBAF basic experimental equipment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-04-13

    The Continuous Electron Beam Accelerator Facility (CEBAF) will be dedicated to basic research in Nuclear Physics using electrons and photons as projectiles. The accelerator configuration allows three nearly continuous beams to be delivered simultaneously in three experimental halls, which will be equipped with complementary sets of instruments: Hall A--two high resolution magnetic spectrometers; Hall B--a large acceptance magnetic spectrometer; Hall C--a high-momentum, moderate resolution, magnetic spectrometer and a variety of more dedicated instruments. This report contains a short description of the initial complement of experimental equipment to be installed in each of the three halls.

  18. Process plant equipment operation, control, and reliability

    CERN Document Server

    Holloway, Michael D; Onyewuenyi, Oliver A

    2012-01-01

    "Process Plant Equipment Book is another great publication from Wiley as a reference book for final year students as well as those who will work or are working in chemical production plants and refinery…" -Associate Prof. Dr. Ramli Mat, Deputy Dean (Academic), Faculty of Chemical Engineering, Universiti Teknologi Malaysia "…give[s] readers access to both fundamental information on process plant equipment and to practical ideas, best practices and experiences of highly successful engineers from around the world… The book is illustrated throughout with numerous black & white p

  19. Risk matrix model for rotating equipment

    Directory of Open Access Journals (Sweden)

    Wassan Rano Khan

    2014-07-01

    Full Text Available Different industries have various residual risk levels for their rotating equipment. Accordingly the occurrence rate of the failures and associated failure consequences categories are different. Thus, a generalized risk matrix model is developed in this study which can fit various available risk matrix standards. This generalized risk matrix will be helpful to develop new risk matrix, to fit the required risk assessment scenario for rotating equipment. Power generation system was taken as case study. It was observed that eight subsystems were under risk. Only vibration monitor system was under high risk category, while remaining seven subsystems were under serious and medium risk categories.

  20. How to optimize an equipment leasing program.

    Science.gov (United States)

    Ung, Blaine; Zeinfeld, Jay

    2011-04-01

    To enable their organizations to get the most value from an equipment leasing contract, healthcare finance executives should: Be aware of "yield enhancers" that could result in unnecessary expenses for the organization (including advance fee requests, restocking fees, and conditions related to contract renewals) Know how to incorporate value-added services as part of contracts (such as asset tracking, memory scrubbing, and equipment disposal) Thoroughly understand the master lease agreements and schedules and be prepared to negotiate, if possible, cross-default language that links to other indebtedness or material contracts

  1. Medical equipment maintenance management and oversight

    CERN Document Server

    Wang, Binseng

    2012-01-01

    In addition to being essential for safe and effective patient care, medical equipment also has significant impact on the income and, thus, vitality of healthcare organizations. For this reason, its maintenance and management requires careful supervision by healthcare administrators, many of whom may not have the technical background to understand all of the relevant factors. This book presents the basic elements of medical equipment maintenance and management required of healthcare leaders responsible for managing or overseeing this function. It will enable these individuals to understand thei

  2. Prediction of wear rates in comminution equipment

    DEFF Research Database (Denmark)

    Jensen, Lucas Roald Dörig; Fundal, Erling; Møller, Per

    2010-01-01

    Raw material comminution equipment may be exposed to excessive wear, which makes it difficult to operate minerals processing plants continuously because lengthy and unplanned shut-downs interrupt the overall process. In general, most comminution equipment is fine-tuned to operate at low vibrations......-resistant high chromium white cast iron (21988/JN/HBW555XCr21), a heat-treated wear resistant steel (Hardox 400) and a plain carbon construction steel (S235). Quartz, which accounts for the largest wear loss in the cement industry, was chosen as abrasive. Other process parameters such as velocity (1–7 m...

  3. Development of Lab-to-Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells

    DEFF Research Database (Denmark)

    Hösel, Markus; Dam, Henrik Friis; Krebs, Frederik C

    2015-01-01

    We describe and review how the scaling of printed energy technologies not only requires scaling of the input materials but also the machinery used in the processes. The general consensus that ultrafast processing of technologies with large energy capacity can only be realized using roll-to-roll m......We describe and review how the scaling of printed energy technologies not only requires scaling of the input materials but also the machinery used in the processes. The general consensus that ultrafast processing of technologies with large energy capacity can only be realized using roll...

  4. Reduced fetal telomere length in gestational diabetes.

    Directory of Open Access Journals (Sweden)

    Jian Xu

    Full Text Available Gestational diabetes mellitus (GDM is an important complication of pregnancy that poses significant threats to women and their offspring. Telomere length shortens as cellular damage increases and is associated with metabolic diseases. Telomere length in fetal leucocytes was determined in 82 infants of women with GDM (N = 82 and 65 normal pregnant women (N = 65. Women with preeclampsia (N = 45 and gestational hypertension (N = 23 were also studied. In the GDM group, telomere length was significantly shorter than normal pregnancy (P = 0.028, but there were no significant differences in fetal telomere length between preeclampsia and normal pregnancy (P = 0.841 and between gestational hypertension and normal pregnancy (P = 0.561. Regression analysis revealed that fetal telomere length was significantly associated with intrauterine exposure to GDM (P = 0.027 after adjustment for maternal age, gestational age at delivery, birth weight and fetal gender. Shortened telomere length may increase the risk of metabolic diseases in adulthood of GDM offspring.

  5. Development and evaluation of magnesium oxide-based ceramics for chamber parts in mass-production plasma etching equipment

    Science.gov (United States)

    Kasashima, Yuji; Tsutsumi, Kota; Mitomi, Shinzo; Uesugi, Fumihiko

    2017-06-01

    In mass-production plasma etching equipment, the corrosion of ceramic chamber parts reduces the production yield of LSI and overall equipment effectiveness (OEE) owing to contamination, short useful life, and particle generation. Novel ceramics that can improve the production yield and OEE are highly required. We develop magnesium oxide (MgO)-based ceramics and evaluate them under mass-production plasma etching conditions. The results of this study indicate that the developed MgO-based ceramics with high mechanical properties and low electric resistivity have a higher resistance to corrosion in plasma etching using CF4 gas than Si and conventional ceramic materials such as aluminum oxide and yttrium oxide.

  6. Classifying stages of third molar development: crown length as a predictor for the mature root length.

    Science.gov (United States)

    Altalie, Salem; Thevissen, Patrick; Willems, Guy

    2015-01-01

    Multiple tooth development staging techniques were reported based on arbitrarily set borderlines between succeeding stages. Anatomic tooth features or predictions of future tooth part dimensions were described to identify the thresholds between the established stages. The need to predict mature tooth dimensions, while the tooth considered is still in development, is a drawback to use this staging technique for dental age estimations. Using the fully mature crown length as a predictor for the future root length could provide a tool for undisputable staging. The aim of this study was first to measure the crown and root length of fully mature third molars and second to investigate whether the crown length could be used as a predictor of the root length, in order to classify the observed root length as a proportion of the future mature root. The crown and root lengths of all present third molars were digitally measured on dental panoramic radiographs of 1,000 subjects. The included subjects were equally distributed in gender, and their age ranged between 22 and 40 years. Two occlusal borders, the cement enamel junction and the root apices, were defined as landmarks for standardized measurements. Regression models with root length as response and crown length as predictor were established and revealed low R (2) and high RMSE values. Due to the small explained variance by the prediction models and the high variation in prediction errors, the observed crown length cannot be used to predict the final root length of a developing third molar.

  7. Restoring contaminated wires, removing gas contaminants, and aging studies of drift tube chambers

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Thomas E-mail: marshall@fnal.gov

    2003-12-01

    The original muon detection system of the Fermilab D0 colliding beam experiment contained 12,000 drift cells 10 cmx5 cm in cross-section and up to 580 cm in length. The gas mixture used was Ar/CF{sub 4}/CO{sub 2} (90:6:4). There was one recycling gas system for all the chambers. During the first year of operation, it was discovered that inefficient cells, all in regions of high radiation, had a contaminating shell of crud coating their wires. The source of the contaminant was outgassing of the cathode pads, which were made from a laminate of fiberglass and epoxy/polyester resin, with a copper cladding on one surface. The vapor formed a brittle sheath on the wires, but only in regions of high current discharge due to radiation from the accelerator and colliding beams. A method for cleaning wires in place was devised. By heating the wire quickly to a temperature close to the melting temperature of gold, the sheath was ripped to shreds and blown away. The procedure for 'zapping' wires and for removing the contaminating vapor is presented. The upgraded D0 experiment now uses Iarocci-type mini-drift tubes for the forward muon system. The results of aging tests for these chambers are also presented.

  8. Tracking cross-contamination transfer dynamics at a mock retail deli market using GloGerm.

    Science.gov (United States)

    Maitland, Jessica; Boyer, Renee; Gallagher, Dan; Duncan, Susan; Bauer, Nate; Kause, Janell; Eifert, Joseph

    2013-02-01

    Ready-to-eat (RTE) deli meats are considered a food at high risk for causing foodborne illness. Deli meats are listed as the highest risk RTE food vehicle for Listeria monocytogenes. Cross-contamination in the retail deli market may contribute to spread of pathogens to deli meats. Understanding potential cross-contamination pathways is essential for reducing the risk of contaminating various products. The objective of this study was to track cross-contamination pathways through a mock retail deli market using an abiotic surrogate, GloGerm, to visually represent how pathogens may spread through the deli environment via direct contact with food surfaces. Six contamination origination sites (slicer blade, meat chub, floor drain, preparation table, employee's glove, and employee's hands) were evaluated separately. Each site was inoculated with 20 ml of GloGerm, and a series of standard deli operations were completed (approximately 10 min of work). Photographs were then taken under UV illumination to visualize spread of GloGerm throughout the deli. A sensory panel evaluated the levels of contamination on the resulting contaminated surfaces. Five of the six contamination origination sites were associated with transfer of GloGerm to the deli case door handle, slicer blade, meat chub, preparation table, and the employee's gloves. Additional locations became contaminated (i.e., deli case shelf, prep table sink, and glove box), but this contamination was not consistent across all trials. Contamination did not spread from the floor drain to any food contact surfaces. The findings of this study reinforce the need for consistent equipment cleaning and food safety practices among deli workers to minimize cross-contamination.

  9. Environmental contamination with Toxocara eggs

    NARCIS (Netherlands)

    Nijsse, Rolf; Mughini-Gras, Lapo; Wagenaar, J.A.; Franssen, Frits; Ploeger, Harm W.

    2015-01-01

    Background: Environmental contamination with Toxocara eggs is considered the main source of human toxocariasis. The contribution of different groups of hosts to this contamination is largely unknown. Current deworming advices focus mainly on dogs. However, controversy exists about blind deworming

  10. Environmental contamination with Toxocara eggs

    NARCIS (Netherlands)

    Nijsse, Rolf; Mughini-Gras, Lapo; Wagenaar, J.A.; Franssen, Frits; Ploeger, Harm W.

    2015-01-01

    Background: Environmental contamination with Toxocara eggs is considered the main source of human toxocariasis. The contribution of different groups of hosts to this contamination is largely unknown. Current deworming advices focus mainly on dogs. However, controversy exists about blind deworming

  11. Contamination and solid state welds.

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Bernice E.

    2007-05-01

    Since sensitivity to contamination is one of the verities of solid state joining, there is a need for assessing contamination of the part(s) to be joined, preferably nondestructively while it can be remedied. As the surfaces that are joined in pinch welds are inaccessible and thus provide a greater challenge, most of the discussion is of the search for the origin and effect of contamination on pinch welding and ways to detect and mitigate it. An example of contamination and the investigation and remediation of such a system is presented. Suggestions are made for techniques for nondestructive evaluation of contamination of surfaces for other solid state welds as well as for pinch welds. Surfaces that have good visual access are amenable to inspection by diffuse reflection infrared Fourier transform (DRIFT) spectroscopy. Although other techniques are useful for specific classes of contaminants (such as hydrocarbons), DRIFT can be used most classes of contaminants. Surfaces such as the interior of open tubes or stems that are to be pinch welded can be inspected using infrared reflection spectroscopy. It must be demonstrated whether or not this tool can detect graphite based contamination, which has been seen in stems. For tubes with one closed end, the technique that should be investigated is emission infrared spectroscopy.

  12. Field based plastic contamination sensing

    Science.gov (United States)

    The United States has a long-held reputation of being a dependable source of high quality, contaminant-free cotton. Recently, increased incidence of plastic contamination from sources such as shopping bags, vegetable mulch, surface irrigation tubing, and module covers has threatened the reputation o...

  13. Processing Contaminants in Food Production

    DEFF Research Database (Denmark)

    Granby, Kit; Duedahl-Olesen, Lene; Fromberg, Arvid

    Contaminants like acrylamide, furan or PAHs (polyaromatic hydrocarbons) as e.g. Benz(a)pyrene may be formed during food processing. All of the substances are genotoxic carcinogens, and for that reason mitigation strategies to reduce the levels are needed. Examples of the formation of the processing...... contaminants and factors that influence the occurrence are given as well as suggestions for mitigation....

  14. The Prevalence of Gram-Negative Bacilli in the Environment and the Equipments: A Case Study in Hospitals of the East of Golestan Province, Iran

    Directory of Open Access Journals (Sweden)

    Ali Asghar Ayatollahi

    2017-01-01

    Full Text Available Background:  Nosocomial infections are considered as health issues that affect developed and poor countries. These infections can be transmitted to patients through hospital environment and equipments. The aim of this study was to evaluate the prevalence of Gram-negative bacilli in the environment and the equipments of hospitals in the East of Golestan province in 2015. Methods:  In this study, 770 samples were collected using sterile swabs from the environment and equipments which were in use in different units of six teaching hospitals located in the East of Golestan province. The collected samples were then identified by standard biochemical tests. Results:   Of the total samples, 249 samples (32.33% were contaminated with Gram-negative bacilli with the most number of contaminations were Enterobacter aerogenes (37.75% at the Department of Surgery (18.07%.  Among the medical equipments and surfaces, the highest level of contamination was observed in laryngoscope and its blades (10.44%, suctions (7.23%, and EKG sensors and monitoring connectors (7.23%. Telephone handset (5.22% and patients’ bed (5.22% had the highest rate of contamination with Gram-negative bacilli in the non-medical equipments. Conclusion:  The results of the present study shows that Gram-negative bacilli contamination rates are considerable in hospitals in East of the Golestan province. Thus, hand washing, disinfecting, sterilizing medical equipment and generally compliance with the standards in this field are of great importance.

  15. The Prevalence of Gram-Negative Bacilli in the Environment and the Equipments, a Case Study in Hospitals of the East of Golestan Province, Iran

    Directory of Open Access Journals (Sweden)

    Ali Asghar Ayatollahi

    2016-09-01

    Full Text Available Background:  Nosocomial infections are considered as health issues that affect developed and poor countries. These infections can be transmitted to patients through hospital environment and equipments. The aim of this study was to evaluate the prevalence of Gram-negative bacilli in the environment and the equipments of hospitals in the East of Golestan province in 2015. Methods:  In this study, 770 samples were collected using sterile swabs from the environment and equipments which were in use in different units of six teaching hospitals located in the East of Golestan province. The collected samples were then identified by standard biochemical tests. Results:   Of the total samples, 249 samples (32.33% were contaminated with Gram-negative bacilli with the most number of contaminations were Enterobacter aerogenes (37.75% at the Department of Surgery (18.07%.  Among the medical equipments and surfaces, the highest level of contamination was observed in laryngoscope and its blades (10.44%, suctions (7.23%, and EKG sensors and monitoring connectors (7.23%. Telephone handset (5.22% and patients’ bed (5.22% had the highest rate of contamination with Gram-negative bacilli in the non-medical equipments. Conclusion:  The results of the present study shows that Gram-negative bacilli contamination rates are considerable in hospitals in East of the Golestan province. Thus, hand washing, disinfecting, sterilizing medical equipment and generally compliance with the standards in this field are of great importance.

  16. Nano-scaled graphene platelets with a high length-to-width aspect ratio

    Science.gov (United States)

    Zhamu, Aruna; Guo, Jiusheng; Jang, Bor Z.

    2010-09-07

    This invention provides a nano-scaled graphene platelet (NGP) having a thickness no greater than 100 nm and a length-to-width ratio no less than 3 (preferably greater than 10). The NGP with a high length-to-width ratio can be prepared by using a method comprising (a) intercalating a carbon fiber or graphite fiber with an intercalate to form an intercalated fiber; (b) exfoliating the intercalated fiber to obtain an exfoliated fiber comprising graphene sheets or flakes; and (c) separating the graphene sheets or flakes to obtain nano-scaled graphene platelets. The invention also provides a nanocomposite material comprising an NGP with a high length-to-width ratio. Such a nanocomposite can become electrically conductive with a small weight fraction of NGPs. Conductive composites are particularly useful for shielding of sensitive electronic equipment against electromagnetic interference (EMI) or radio frequency interference (RFI), and for electrostatic charge dissipation.

  17. Genotyping of the fish rhabdovirus, viral haemorrhagic septicaemia virus, by restriction fragment length polymorphisms

    DEFF Research Database (Denmark)

    Einer-Jensen, Katja; Winton, J.; Lorenzen, Niels

    2005-01-01

    -gene by a set of three restriction enzymes was predicted to accurately enable the assignment of the VHSV isolates into the four major genotypes discovered to date. Further sub-typing of the isolates into the recently described sub-lineages of genotype I was possible by applying three additional enzymes......The aim of this study was to develop a standardized molecular assay that used limited resources and equipment for routine genotyping of isolates of the fish rhabdovirus, viral haemorrhagic septicaemia virus (VHSV). Computer generated restriction maps, based on 62 unique full-length (1524 nt......) sequences of the VHSV glycoprotein (G) gene, were used to predict restriction fragment length polymorphism (RFLP) patterns that were subsequently grouped and compared with a phylogenetic analysis of the G-gene sequences of the same set of isolates. Digestion of PCR amplicons from the full-length G...

  18. Equipment, exposure, emission review--specification of process equipment for worker exposure control.

    Science.gov (United States)

    Bowes, Stephen M

    2008-12-01

    Worker exposure to chemical agents may occur from equipment leaks in closed processes and from open system activities and maintenance (e.g., sampling, tank gauging, line breaking, equipment flushing, and drainage). To prevent worker overexposure to chemical agents, an Equipment, Exposure, Emission Review (EEER) was developed to consistently match equipment properties to the leakage-related inhalation risk posed by each stream. For streams where gas or liquid leakage could cause worker exposure above occupational exposure limits (OEL), the EEER recommended a high performance, low leakage equipment category. Conversely, where standard engineering offered reliable containment for lower health risk streams, the EEER did not recommend over-control. The EEER matched equipment to stream health hazard as follows: (1) the composition of each stream was determined, with particular attention to chemical substances with stringent exposure limits; (2) a mixture exposure limit was calculated for each stream based on stream composition and the OEL for stream constituent chemicals; (3) each stream was classified as to its respiratory exposure hazard on the basis of the stream exposure limit; (4) equipment was recommended as a function of respiratory exposure hazard class using an Equipment Selection Matrix. Equipment options were based, in part, on the emission performance of the equipment and a near-field dispersion model that was used to relate equipment emissions to an OEL. Over a 5-yr implementation period, nearly 1700 streams of 78 refining process units were reviewed. Standard engineering practice was selected for about 70% of the streams reviewed. Benzene, hydrogen sulfide, ethanolamine, and high boiling aromatic oil streams were the primary chemical agents responsible for more stringent controls. Although the EEER criteria for stream classification and control options were arranged in order of magnitude--a form of control banding--the correct selection of control

  19. Reduction of Clinical Culture Contamination in an Inpatient Medical Unit by Revisiting Microbiology Education.

    Science.gov (United States)

    Yoon, Bona; Irmler, Monica; Faselis, Charles; Liappis, Angelike P

    2016-10-01

    Clinical culture contaminations delay the correct diagnosis, result in repeat testing, and may extend the length of a hospital stay. A simple educational session reminding providers of the ubiquitous presence of bacteria on the skin and in our environment, led to a significant decrease in contaminated cultures (16.9% versus 10.9%, p = 0.03). J Contin Educ Nurs. 2016;47(10):446-448. Copyright 2016, SLACK Incorporated.

  20. Phytostabilization of metal contaminated soils.

    Science.gov (United States)

    Alkorta, I; Becerril, J M; Garbisu, C

    2010-01-01

    The contamination of soils with heavy metals represents a worldwide environmental problem of great concern. Traditional methods for the remediation of metal contaminated soils are usually very expensive and frequently induce adverse effects on soil properties and biological activity. Consequently, biological methods of soil remediation like phytoremediation (the use of green plants to clean up contaminated sites) are currently receiving a great deal of attention. In particular, chemophytostabilization of metal contaminated soils (the use of metal tolerant plants together with different amendments like organic materials, liming agents, or phosphorus compounds and such) to reduce metal mobility and bioavailability in soils appears most promising for sites contaminated with high levels of several metals when phytoextraction is not a feasible option. During chemophytostabilization processes, one must at all times be cautious with a possible future reversal of soil metal immobilization, with concomitant adverse environmental consequences.

  1. Auto Mechanics. Heavy Equipment. Small Engines.

    Science.gov (United States)

    Finnerty, Kathy

    Developed for use in auto mechanics, Heavy Equipment Repair and Operation (HERO), and small engines programs, these study guides and supplemental worksheets cover operating principles, lubrication, cooling system, ignition circuit and electrical system, and fuel system. The worksheets and guide questions are phrased to emphasize key points…

  2. Design of a rib impactor equipment

    Science.gov (United States)

    Torres, C. R.; García, G.; Aguilar, L. A.; Martínez, L.

    2017-01-01

    The human ribs must be analyzed as long and as curved bones, due to their physiology. For the development of an experimental equipment that simulate the application of loads, over the rib in the moment of a frontal collision in an automobile with seat belt, it was applied a methodology that constituted in the identification of needs and the variables which led the design of 3D model, from this it was used the technique of fused deposition modeling for the development of the equipment pieces. The supports that hold the rib ends were design with two and three degrees of freedom that allows the simulation of rib movement with the spine and the breastbone in the breathing. For the simulation of the seat belt, it was determined to applied two loads over the front part of the rib from the sagittal and lateral plane respectively, for this it was made a displacement through a lineal actuator with a speed of 4mm/s. The outcomes shown a design of an equipment able to obtain the load parameters required to generate fractures in rib specimens. The equipment may be used for the study of specimens with nearby geometries to the rib taken as a reference.

  3. Standard hydrogen monitoring system equipment installation instructions

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1996-09-27

    This document provides the technical specifications for the equipment fabrication, installation, and sitework construction for the Standard Hydrogen Monitoring System. The Standard Hydrogen Monitoring System is designed to remove gases from waste tank vapor space and exhaust headers for continual monitoring and remote sample analysis.

  4. 78 FR 25916 - Authorization of Radiofrequency Equipment

    Science.gov (United States)

    2013-05-03

    ..., while at the same time protecting against interference among radio services and devices using the RF... multitude of RF devices used in the United States operate effectively without causing harmful interference... provision of RF equipment, while at the same time protecting against interference among radio services and...

  5. Equipping Youth with Mature Moral Judgment

    Science.gov (United States)

    Gibbs, John C.

    2003-01-01

    To enhance the ability of youth to help peers and themselves, the author proposes specific training in mature social decision-making to help youth overcome immature moral development and egocentric thinking. The EQUIP program emphasizes the positive moral potential of anti-social adolescents, as well as the limitations of antisocial youth:…

  6. 45 CFR 2543.34 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... Regulations Relating to Public Welfare (Continued) CORPORATION FOR NATIONAL AND COMMUNITY SERVICE GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award... not use equipment acquired with Federal funds to provide services to non-Federal outside organizations...

  7. 47 CFR 74.151 - Equipment changes.

    Science.gov (United States)

    2010-10-01

    ... equipment that are deemed desirable or necessary provided: (a) That the operating frequency is not permitted to deviate more than the allowed tolerance; (b) That the emissions are not permitted outside the authorized band; (c) That the power output complies with the license and the regulations governing the...

  8. 47 CFR 73.712 - Equipment tests.

    Science.gov (United States)

    2010-10-01

    ... rules and regulations. Such tests shall use voice identification and test tones only. No programming... 47 Telecommunication 4 2010-10-01 2010-10-01 false Equipment tests. 73.712 Section 73.712 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST...

  9. Robust control investigations for equipment loaded panels

    DEFF Research Database (Denmark)

    Aglietti, G.S.; Langley, R.S.; Rogers, E.

    1998-01-01

    This paper develops a modelling technique for equipment load panels which directly produces (adequate) models of the underlying dynamics on which to base robust controller design/evaluations. This technique is based on the use of the Lagrange's equations of motion and the resulting models...

  10. The first equipment for protection from nanoparticles

    Science.gov (United States)

    Faure, Louis-Paul; Bombardier, Pierre; Reinwalt, Jean-Marie

    2009-05-01

    How can we guarantee the containment of ultrafine particles but also implement the ergonomic and handling constraints voiced by researchers? This is the equation that the engineers at FAURE INGENIERIE had to resolve to develop the first barrier protection equipment for nanoparticle research.

  11. 22 CFR 145.34 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... Relations DEPARTMENT OF STATE CIVIL RIGHTS GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION... such other use will not interfere with the work on the project or program for which the equipment was... promptly notify the Department. (5) Adequate maintenance procedures shall be implemented to keep the...

  12. Communication equipment for underground conveyor units

    Energy Technology Data Exchange (ETDEWEB)

    Geurts, J.

    1981-06-01

    There are many factors governing smooth operation of a conveyor system. Communication systems are required for fast access to information in case of disturbances. The following possibilities are reported: Use of the existing telecommunication network, use of radio equipment, use of an independent intercommunication system.

  13. The LHC's equipment all in step

    CERN Multimedia

    2005-01-01

    Over 80% of the control equipment for the LHC will be connected by a special communication network known as WorldFIP, which has been chosen for its very precise timing, excellent operating performance and robustness in difficult environments. Over 350 kilometres of this network are currently being installed in the LHC tunnel and checked for compliance with the required standards.

  14. 21 CFR 1250.34 - Refrigeration equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Refrigeration equipment. 1250.34 Section 1250.34 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... SANITATION Food Service Sanitation on Land and Air Conveyances, and Vessels § 1250.34 Refrigeration...

  15. 21 CFR 1020.31 - Radiographic equipment.

    Science.gov (United States)

    2010-04-01

    ...) RADIOLOGICAL HEALTH PERFORMANCE STANDARDS FOR IONIZING RADIATION EMITTING PRODUCTS § 1020.31 Radiographic... indicators. The x-ray control shall provide visual indication whenever x-rays are produced. In addition, a...) Radiation from capacitor energy storage equipment. Radiation emitted from the x-ray tube shall not exceed...

  16. Magnet measuring equipment of SC2

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    Checking the positioning of the magnet measuring equipment installed between the poles of SC2. The steel structure in front of the magnet is designed to house the rotary condenser and to shield it from the stray magnetic field of the accelerator.

  17. Magnet measuring equipment of SC2

    CERN Multimedia

    1974-01-01

    Checking the positioning of the magnet measuring equipment installed between the poles of SC2. The steel structure in front of the magnet is designed to house the rotary condenser and to shield it from the stray magnetic field of the accelerator. On the left, Marinus van Gulik. (See Photo Archive 7402005 and Annual Report 1974, p. 44.)

  18. 43 CFR 12.934 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... Federal funds to provide services to non-Federal outside organizations for a fee that is less than private... shall be in effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any... which provide for competition to the extent practicable and result in the highest possible return....

  19. 7 CFR 550.38 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... Federal funds to provide services to non-Federal outside organizations for a fee that is less than private... equipment. (4) A control system shall be in effect to insure adequate safeguards to prevent loss, damage, or... established which provide for competition to the extent practicable and result in the highest possible...

  20. 41 CFR 105-72.404 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... services to non-Federal outside organizations for a fee that is less than private companies charge for... shall be in effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any... which provide for competition to the extent practicable and result in the highest possible return....

  1. 22 CFR 226.34 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... to provide services to non-Federal outside organizations for a fee that is less than private..., and continued need for the equipment. (4) A control system shall be in effect to insure adequate... which provide for competition to the extent practicable and result in the highest possible return....

  2. 49 CFR 19.34 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... a fee that is less than private companies charge for equivalent services, unless specifically..., current utilization, and continued need for the equipment. (4) A control system shall be in effect to... competition to the extent practicable and result in the highest possible return. (g) When the recipient...

  3. 14 CFR 1260.134 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... with Federal funds to provide services to non-Federal outside organizations for a fee that is less than..., and continued need for the equipment. (4) A control system shall be in effect to insure adequate... sales procedures shall be established which provide for competition to the extent practicable and...

  4. 7 CFR 3019.34 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... Federal funds to provide services to non-Federal outside organizations for a fee that is less than private... equipment. (4) A control system shall be in effect to ensure adequate safeguards to prevent loss, damage, or... procedures shall be established which provide for competition to the extent practicable and result in...

  5. 29 CFR 95.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... funds to provide services to non-Federal outside organizations for a fee that is less than private... effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any loss, damage... competition to the extent practicable and result in the highest possible return. (g) When the recipient...

  6. 2 CFR 215.34 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... to non-Federal outside organizations for a fee that is less than private companies charge for... shall be in effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any... which provide for competition to the extent practicable and result in the highest possible return....

  7. 22 CFR 518.34 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... that is less than private companies charge for equivalent services, unless specifically authorized by..., current utilization, and continued need for the equipment. (4) A control system shall be in effect to... competition to the extent practicable and result in the highest possible return. (g) When the recipient...

  8. 34 CFR 74.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... to provide services to non-Federal outside organizations for a fee that is less than private... must be in effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any... competition to the extent practicable and result in the highest possible return. (g) When the recipient...

  9. 38 CFR 49.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... to non-Federal outside organizations for a fee that is less than private companies charge for... shall be in effect to insure adequate safeguards to prevent loss, damage, or theft of the equipment. Any... which provide for competition to the extent practicable and result in the highest possible return....

  10. Diagnosis of Equipment Failures by Pattern Recognition

    DEFF Research Database (Denmark)

    Pau, L. F.

    1974-01-01

    The main problems in relation to automatic fault finding and diagnosis in equipments or production systems are discussed: 1) compression of the syndrome and observation spaces for better discrimination between failure modes; 2) simultaneous display of the failure patterns and the failure instants...

  11. 21 CFR 1403.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... OFFICE OF NATIONAL DRUG CONTROL POLICY UNIFORM ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE... of disposal and sale price of the property. (2) A physical inventory of the property must be taken... the equipment in accordance with Federal agency rules and procedures, and submit an annual inventory...

  12. Equipment and techniques for carbon nanotube research

    Energy Technology Data Exchange (ETDEWEB)

    Vorob' eva, Alla I [Belarusian State University of Informatics and Radioelectronics, Minsk (Belarus)

    2010-06-07

    Many nanotube applications, in particular those in nanoelectronic systems, require nanotubes with strictly defined electrophysical parameters. This paper reviews equipment and techniques for studying and measuring the most important of these parameters. Theoretical and experimental parameter values obtained from different techniques are compared. Ways of preparing nanotube-containing samples for investigation and measurement purposes are examined. (instruments and methods of investigation)

  13. Stopping of Ships Equipped with Azipods

    Directory of Open Access Journals (Sweden)

    Jacek Nowicki

    2014-09-01

    Full Text Available The paper contains a description of different possibilities of stopping a large ship equipped with azipods. The model tests were carried out to compare the effectiveness of stopping the ship using the different methods. The ship model used in stopping tests reproduces a large LNG carrier of capacity ~150 000 m3

  14. 48 CFR 870.112 - Telecommunications equipment.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Telecommunications... DEPARTMENT SUPPLEMENTARY REGULATIONS SPECIAL PROCUREMENT CONTROLS Controls 870.112 Telecommunications... specifications for telecommunications equipment, as defined in VA manual MP-6, Part VIII (available at any...

  15. Longevity and Depreciation of Audiovisual Equipment.

    Science.gov (United States)

    Post, Richard

    1987-01-01

    Describes results of survey of media service directors at public universities in Ohio to determine the expected longevity of audiovisual equipment. Use of the Delphi technique for estimates is explained, results are compared with an earlier survey done in 1977, and use of spreadsheet software to calculate depreciation is discussed. (LRW)

  16. 43 CFR 12.72 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Equipment. 12.72 Section 12.72 Public Lands: Interior Office of the Secretary of the Interior ADMINISTRATIVE AND AUDIT REQUIREMENTS AND COST PRINCIPLES FOR ASSISTANCE PROGRAMS Uniform Administrative Requirements for Grants and Cooperative...

  17. ModBack - simplified contaminant source zone delineation using backtracking

    Science.gov (United States)

    Thielsch, K.; Herold, M.; Ptak, T.

    2012-12-01

    al. (2005). The contaminant plume length can be estimated using plume length statistics, first order rate degradation equations or calculations based on site specific hydraulic and chemical parameters. Furthermore, an analytical tool is included to identify the distribution of contaminants across a control plane. All relevant output can be graphically displayed and saved as vector data to be later used in GIS software. ModBack has been already used to delimit the zones of source presence or absence at several test sites. With ModBack, a tool is now available which enables environmental consultants, engineers and environmental agencies to delineate possible sources of contamination already at the planning stage of site investigation and remediation measures, helping to significantly reduce costs of contaminated site management. Bayer-Raich, M., Jarsjö, J., Holder, T. and Ptak, T. (2003): "Numerical estimations of contaminant mass flow rate based on concentration measurements in pumping wells", ModelCare 2002: A Few Steps Closer to Reality, IAHS Publication No. 277, 10-16. Jarsjö, J., Bayer-Raich, M., Ptak, T. (2005): "Monitoring groundwater contamination and delineating source zones at industrial sites: Uncertainty analyses using integral pumping tests", Journal of Contaminant Hydrology, 79, 107-134

  18. 46 CFR 153.215 - Safety equipment lockers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Safety equipment lockers. 153.215 Section 153.215... Vessel Requirements § 153.215 Safety equipment lockers. Each self-propelled ship must have the following: (a) Each tankship must have at least two safety equipment lockers. (b) One safety equipment...

  19. 38 CFR 17.156 - Eligibility for automobile adaptive equipment.

    Science.gov (United States)

    2010-07-01

    ... automobile adaptive equipment. 17.156 Section 17.156 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.156 Eligibility for automobile adaptive equipment. Automobile adaptive equipment may be authorized if the Under Secretary for Health...

  20. 21 CFR 211.182 - Equipment cleaning and use log.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and use log. 211.182 Section... Reports § 211.182 Equipment cleaning and use log. A written record of major equipment cleaning... individual equipment logs that show the date, time, product, and lot number of each batch processed....