WorldWideScience

Sample records for legume-crested wheatgrass mixtures

  1. Proteomics characterization of intermediate wheatgrass (Thinopyrum intermedium) flour proteins

    Science.gov (United States)

    Thinopyrum intermedium, commonly known as intermediate wheatgrass (IWG), is a perennial crop with favorable agronomic characteristics and nutritional benefits. IWG lines are deficient in high molecular weight glutenins (HMWG), responsible for dough strength. A detailed characterization of IWG flou...

  2. Multitude potential of wheatgrass juice (Green Blood: An overview

    Directory of Open Access Journals (Sweden)

    Swati Padalia

    2010-01-01

    Full Text Available Wheatgrass is the young grass of the common wheat plant Triticum aestivum Linn., family Poeaceae (Graminae. It is commonly known as the "green blood" due to its high chlorophyll content which accounts for 70% of its chemical constituents. It contains a plethora of vitamins, minerals, amino acids and vital enzymes like superoxide dismutase and cytochrome oxidase. The vitamin content makes it an important adjuvant in anti-allergic and anti-asthmatic treatment, while the enzymes play a pivotal role in the anticancer approach of this herbal drug. A notable feature of the wheatgrass juice is its bioflavonoid content which are the naturally occurring antioxidants and ac-count for many of its clinical utilities such as management of inflammatory bowel disease and as a general detoxi-fier. However, the most remarkable feature of the wheatgrass juice is its high chlorophyll content. Chlorophyll bears structural similarity to hemoglobin and has been found to regenerate or act as a substitute of hemoglobin in hemoglobin deficiency conditions. This might be the reason behind the utility of wheatgrass in clinical conditions like thalassemia and hemolytic anemia. The present article focuses onto the various studies emphasizing the multi-tude potentials of wheatgrass.

  3. Living life the natural way – Wheatgrass and Health

    Directory of Open Access Journals (Sweden)

    Jaspreet Kaur Kamboj

    2011-11-01

    Full Text Available Abstract:The Human diet is enriched with young parts of plants (so called ―green foods‖, which can improve nutrient balance intake in natural way. Wheatgrass (Triticum aestivum refers to young grass of the common wheat plant, which belongs to Poaceae family. This is the most commonly found herb in India, although its nativity is currently unknown. This plant is believed to have many nutritional values; it has been shown to have anti-inflammatory, antioxidant, anticarcinogenic, immunomodulatory, laxative, astringent, diuretic, antibacterial and anti-aging properties. Its use in acidity, colitis, kidney malfunctions, atherosclerosis and swelling has been shown to be beneficial. Wheatgrass juice helps in building red blood cells and stimulates healthy tissue cell growth. 100 g of wheatgrass powder is equal to 23 kg of fresh vegetables. Ideally, wheatgrass should be taken about an hour prior to meal. This allows the body to fully metabolize it without competing with other foods, and it may also curb hunger. It is recommended that lot of water (at least a liter should be consumed with the juice to reap its maximum nutritional benefits. Taking wheatgrass as a supplement in the mid-morning or mid-afternoon is a great time for this "green" energy boost.

  4. Do cheatgrass, snake river wheatgrass, and crested wheatgrass sense different availabilities of N and P in soils conditioned by a cheatgrass invasion?

    Science.gov (United States)

    Long-term invasion by cheatgrass often increases availability of soil N and P thereby fostering increased competitive ability. We designed an experiment to test if cheatgrass (exotic annual), Snake River wheatgrass (native perennial), and crested wheatgrass (exotic perennial) all benefit from this e...

  5. Multitude potential of wheatgrass juice (Green Blood: An overview

    Directory of Open Access Journals (Sweden)

    Indira Raheja

    2010-03-01

    Full Text Available Wheatgrass is the young grass of the common wheat plant Triticum aestivum Linn., family Poeaceae (Graminae. It is commonly known as the “green blood” due to its high chlorophyll content which accounts for 70% of its chemical constituents. It contains a plethora of vitamins, minerals, amino acids and vital enzymes like superoxide dismutase and cytochrome oxidase. The vitamin content makes it an important adjuvant in anti-allergic and anti-asthmatic treatment, while the enzymes play a pivotal role in the anticancer approach of this herbal drug. A notable feature of the wheatgrass juice is its bioflavonoid content which are the naturally occurring antioxidants and account for many of its clinical utilities such as management of inflammatory bowel disease and as a general detoxifier. However, the most remarkable feature of the wheatgrass juice is its high chlorophyll content. Chlorophyll bears structural similarity to hemoglobin and has been found to regenerate or act as a substitute of hemoglobin in hemoglobin deficiency conditions. This might be the reason behind the utility of wheatgrass in clinical conditions like thalassemia and hemolytic anemia. The present article focuses onto the various studies emphasizing the multitude potentials of wheatgrass.

  6. Studies on tender wheatgrass: estimation of elemental content, bioaccessibility of essential elements and antioxidant activity

    International Nuclear Information System (INIS)

    Reddy, A.V.R.; Acharya, R.; Nair, A.G.C.; Kulkarni, S.D.; Rajurkar, N.S.

    2008-08-01

    Tender wheatgrass is being consumed by human beings in juice form or as it is due to its antioxidant potential and medicinal value. Systematic studies were carried out to (i) estimate elemental profiles as a function of growth period and conditions, bioaccessibility of different elements and the antioxidant potential of the tender wheatgrass, (ii) determine the optimum growth period for obtaining maximum benefit and (iii) examine the possible correlation between antioxidant potential and mineral content. Wheatgrass was grown in four different conditions namely (i) tap water, (ii) tap water with nutrients, (iii) soil and tap water and (iv) soil with nutrient solution. The studies were carried out on the wheatgrass of 5-20 days old. For comparison with laboratory grown wheatgrass, a set of commercially available wheatgrass tablets and wheat seeds were also studied. Instrumental neutron activation analysis (INAA) was used for concentration determination of elements in the wheatgrass, wheat seeds and wheatgrass tablets. A total of 15 elements like Na, K, Ca, Mg, Mn, Br, Fe and Zn were determined in the samples of shoots and roots of tender wheatgrass. A comparison with the recommended dietary allowance (RDA) of different essential elements with that in tender wheatgrass revealed that wheatgrass is a good source of minerals for health benefits rather than a food supplement. Bioaccessible fractions of various elements were estimated by a chemical NAA method by subjecting the samples to in vitro gastric and gastro-intestinal digestion followed by NAA. The bioaccessibility concentrations by both the measurements were in the range of 9-60%. It was found that bioaccessibility of the elements studied was the highest from fresh wheatgrass and the lowest from wheat seeds. Accuracy of the NAA method was evaluated by analyzing two biological reference materials, SRM 1573a (Tomato leaves) from NIST, USA and ICHTJ CTA-vtl-2 (Tobacco leaves) from INCT, Poland. The antioxidant

  7. Notice to release Anatone germplasm bluebunch wheatgrass (selected class natural population)

    Science.gov (United States)

    Stephen B. Monsen; Stanley G. Kitchen; Kelly Memmott; Nancy Shaw; Mike Pellant; Stanford Young; Dan Ogle; Loren St. John

    2003-01-01

    Anatone is a natural, non-manipulated bluebunch wheatgrass population accession originating from Asotin County in Southeastern Washington. It is a long-lived perennial bunchgrass better adapted to low elevation, semi-arid sites with long, hot growing seasons than other bluebunch wheatgrass accessions or available releases. Its seedling vigor and establishment also...

  8. Strategies to enhance plant structure and diversity in crested wheatgrass seedings

    Science.gov (United States)

    Mike Pellant; Cindy R. Lysne

    2005-01-01

    Crested wheatgrass (Agropyron cristatum sensu amplo [L.] Gaertn.) is an introduced, caespitose grass that has been seeded on millions of acres of Western rangelands. In some areas, crested wheatgrass seedings overlap with critical sage-grouse (Centrocercus urophasianus; C. minimus) habitat,...

  9. Mixture

    Directory of Open Access Journals (Sweden)

    Silva-Aguilar Martín

    2011-01-01

    Full Text Available Metals are ubiquitous pollutants present as mixtures. In particular, mixture of arsenic-cadmium-lead is among the leading toxic agents detected in the environment. These metals have carcinogenic and cell-transforming potential. In this study, we used a two step cell transformation model, to determine the role of oxidative stress in transformation induced by a mixture of arsenic-cadmium-lead. Oxidative damage and antioxidant response were determined. Metal mixture treatment induces the increase of damage markers and the antioxidant response. Loss of cell viability and increased transforming potential were observed during the promotion phase. This finding correlated significantly with generation of reactive oxygen species. Cotreatment with N-acetyl-cysteine induces effect on the transforming capacity; while a diminution was found in initiation, in promotion phase a total block of the transforming capacity was observed. Our results suggest that oxidative stress generated by metal mixture plays an important role only in promotion phase promoting transforming capacity.

  10. Crested wheatgrass-cheatgrass seedling competition in a mixed-density design

    Science.gov (United States)

    Francis, Mark G.; Pyke, David A.

    1996-01-01

    Plant competition experiments have historically used designs that are difficult to interpret due to confounding problems. Recently, designs based on a 'response function' approach have been proposed and tested in various plant mixture settings. For this study, 3 species were used that are important in current revegetation practices in the Intermountain West. 'Nordan' (Agropyron desertorum [Fish. ex Link] Shult.) and 'Hycrest' (A. cristatum [L.] Gaertn. x desertorum) crested wheatgrass are commonly-used revegetation species on rangelands susceptible to cheatgrass (Bromus tectorum L.) invasion, although little quantitative data exist that compare their competitive abilities. We evaluated the competitive ability of Hycrest and Nordan seedlings in 2-species mixtures with cheatgrass in a greenhouse study. Linear and nonlinear models were developed for a range of densities (130- 520 seeds m-2) for each species to predict median above-ground biomass and tiller numbers and to further test the usefulness of this design for evaluating species to rehabilitate rangelands. In both experiments, increasing Hycrest and Nordan densities reduced their own biomass and tiller production while increasing Hycrest densities reduced cheatgrass biomass and tiller production. Nordan did not affect cheatgrass biomass and tiller production. However, increasing cheatgrass densities reduced Hycrest and Nordan biomass and tiller production, and its own biomass and tiller production. The competition index i.e. substitution rate, indicated that Hycrest seedlings were better competitors with cheatgrass than Nordan, although in all mixtures, cheatgrass plants were the superior competitors. Further field research using this design, where environmental inputs are less optimal and diverse, is needed to validate these results and to further evaluate the use of this approach in examining effects of intra- and interspecific competition.

  11. Hycrest crested wheatgrass accelerates the degradation of pentachlorophenol in soil

    Science.gov (United States)

    Ferro, A. M.; Sims, R. C.; Bugbee, B.

    1994-01-01

    We investigated the effects of vegetation on the fate of pentachlorophenol (PCP) in soil using a novel high-flow sealed test system. Pentachlorophenol has been widely used as a wood preservative, and this highly toxic biocide contaminates soil and ground water at many sites. Although plants are known to accelerate the rates of degradation of certain soil contaminants, this approach has not been thoroughly investigated for PCP. The fate of [14C]PCP, added to soil at a concentration of 100 mg/kg, was compared in three unplanted and three planted systems. The plant used was Hycrest, a perennial, drought-tolerant cultivar of crested wheatgrass [Agropyron desertorum (Fischer ex Link) Schultes]. The flow-through test system allowed us to maintain a budget for 14C-label as well as monitor mineralization (breakdown to 14CO2) and volatilization of the test compound in a 155-d trial. In the unplanted systems, an average of 88% of the total radiolabel remained in the soil and leachate and only 6% was mineralized. In the planted system, 33% of the radiolabel remained in the soil plus leachate, 22% was mineralized, and 36% was associated with plant tissue (21% with the root fraction and 15% with shoots). Mineralization rates were 23.1 mg PCP mineralized kg-1 soil in 20 wk in the planted system, and for the unplanted system 6.6 mg PCP kg-1 soil for the same time period. Similar amounts of volatile organic material were generated in the two systems (1.5%). Results indicated that establishing crested wheatgrass on PCP-contaminated surface soils may accelerate the removal of the contaminant.

  12. Investigation of phytochemical constituents, phenolic profiles and antioxidant activities of ricegrass juice compared to wheatgrass juice

    Directory of Open Access Journals (Sweden)

    Rattanamanee Chomchan

    2016-10-01

    Full Text Available Background: Cereal grass has been brought attention as a new functional food. Wheatgrass juice was known as a super food which provides lots of advantages for human health. However, the young stage of rice sprout has not been made widely known for consumption, though it is in the similar family to wheat (Poaeceae. Accordingly, ricegrass juice can and should be introduced, especially in Asian countries, as an economical functional drink. Nevertheless, currently there is none of the apparent evidences which confirm the nutritive values of ricegrass juice compared to wheatgrass juice. Objective: To investigate the chemical compositions, major phytochemical constituents, bioactive compounds content, specific phenolic profiles, and in vitro antioxidant activities of ricegrass juice compared to wheatgrass juice. Methods: Rice and wheat seeds were germinated and grown hydroponically for 8 days. Both fresh plants were determined for chemical compositions. Next, the grasses were extracted with water, centrifuged, and the supernatants were tested for chlorophyll, carotenoid, and ascorbic acid contents. The left-over supernatant were freeze-dried. The extracts were then screened for the main group of phytochemicals, total extractable phenolic and specific phenolic compounds. Lastly, the extracts were tested for the antioxidant activities using DPPH, ABTS, FRAP, FCA and HRSA. Results: Data revealed that wheatgrass contained higher levels of protein and fat. Both ricegrass and wheatgrass juice extract exhibited the group of phenol, tannin and saponin but not alkaloid, flavonoid, sterol, terpenoid, courmarin, and cardiac glycoside. Wheatgrass juice can be detected for higher level of ascorbic acid and chlorophyll. Both grass juices were found the similar phenolic acids analyzed by HPLC included pyrogallol, vanilic acid, syringic acid and ferulic acid, however, ricegrass juice contained larger amounts of all phenolic acids excluding syringic acid. Conversely

  13. Genotyping-by-sequencing data of 272 crested wheatgrass (Agropyron cristatum genotypes

    Directory of Open Access Journals (Sweden)

    Pingchuan Li

    2017-12-01

    Full Text Available Crested wheatgrass [Agropyron cristatum L. (Gaertn.] is an important cool-season forage grass widely used for early spring grazing. However, the genomic resources for this non-model plant are still lacking. Our goal was to generate the first set of next generation sequencing data using the genotyping-by-sequencing technique. A total of 272 crested wheatgrass plants representing seven breeding lines, five cultivars and five geographically diverse accessions were sequenced with an Illumina MiSeq instrument. These sequence datasets were processed using different bioinformatics tools to generate contigs for diploid and tetraploid plants and SNPs for diploid plants. Together, these genomic resources form a fundamental basis for genomic studies of crested wheatgrass and other wheatgrass species. The raw reads were deposited into Sequence Read Archive (SRA database under NCBI accession SRP115373 (https://www.ncbi.nlm.nih.gov/sra?term=SRP115373 and the supplementary datasets are accessible in Figshare (10.6084/m9.figshare.5345092. Keywords: Crested wheatgrass, Genotyping-by-sequencing, Diploid, Tetraploid, Raw sequence data

  14. A Native Arbuscular Mycorrhizal Fungus, Acaulospora scrobiculata Stimulated Growth of Mongolian Crested Wheatgrass ( Agropyron cristatum (L. Gaertn.

    Directory of Open Access Journals (Sweden)

    Burenjargal Otgonsuren

    2010-12-01

    Full Text Available Agr opyron cristatum (L. Gaertn. (crested wheatgrass is an endemic plant species, which dominates most area of the Mongolian steppe and forest steppe. In the present study, spores of arbuscular mycorrhizal fungi in the rhizosphere soil of crested wheatgrass were isolated with wet- sieving/decanting methods, and the major species was identifi ed as Acaulospora scrobiculata Trappe. For arbuscular-mycorrhizal resynthesis, the spores of A. scrobiculata were propagated with corn pot-culture technique and inoculated onto the roots of crested wheatgrass seedlings. The inoculated crested wheatgrass seedlings exhibited vigor in growth, and examination of the root structure revealed the occurrence of arbuscules and vesicles in the cortical cells. These results demonstrated that A. scrobiculata could effectively form arbuscular mycorrhizas with crested wheatgrass and promote its growth, which can be used to restore Mongolian grassland.

  15. Genetic and epigenetic changes in somatic hybrid introgression lines between wheat and tall wheatgrass

    Science.gov (United States)

    Broad phenotypic variations were induced in derivatives of an asymmetric somatic hybridization of bread wheat (Triticum aestivum) and tall wheatgrass (Thinopyrum ponticum Podp); however, how did these variations happened was unknown. We explored the nature of these variations by cytogenetic assays ...

  16. Variation in sagebrush communities historically seeded with crested wheatgrass in the eastern great basin

    Science.gov (United States)

    Although crested wheatgrass (CWG; Agropyron cristatum [L.] Gaertn.) has been one of the most commonly seeded exotic species in the western United States, long-term successional trajectories of seeded sites are poorly characterized, especially for big sagebrush (Artemisia tridentana Nutt.) ecosystems...

  17. Habitat use and food selection of small mammals near a sagebrush/crested wheatgrass interface in southeastern Idaho

    International Nuclear Information System (INIS)

    Koehler, D.K.; Anderson, S.H.

    1991-01-01

    Research has been conducted on various aspects of the ecology of wildlife residing on and adjacent to the Subsurface Disposal Area (SDA) and one other low-level radioactive waste disposal site on the Idaho National Engineering Laboratory (INEL) in southeastern Idaho. Habitat use and food selection data were collected for deer mice (Peromyscus maniculatus), montane voles (Microtus montanus), Ord's kangaroo rats (Dipodomys ordii), and Townsend's ground squirrels (Spermophilus townsendii) near a sagebrush (Artemisia tridentata)/crested wheatgrass (Agropyron cristatum) interface. Significantly more captures occurred in the native sagebrush habitat than in areas planted in crested wheatgrass or in disturbed sites. Crested wheatgrass, a prolific seed producer, still accounted for over 30% of the total captures. Montane voles and Townsend's ground squirrels (during periods of aboveground activity) used the crested wheatgrass habitat throughout the summer, while deer mice and Ord's kangaroo rats exhibited heavy use after seed set

  18. Molecular cytogenetic (FISH and genome analysis of diploid wheatgrasses and their phylogenetic relationship.

    Directory of Open Access Journals (Sweden)

    Gabriella Linc

    Full Text Available This paper reports detailed FISH-based karyotypes for three diploid wheatgrass species Agropyron cristatum (L. Beauv., Thinopyrum bessarabicum (Savul.&Rayss A. Löve, Pseudoroegneria spicata (Pursh A. Löve, the supposed ancestors of hexaploid Thinopyrum intermedium (Host Barkworth & D.R.Dewey, compiled using DNA repeats and comparative genome analysis based on COS markers. Fluorescence in situ hybridization (FISH with repetitive DNA probes proved suitable for the identification of individual chromosomes in the diploid JJ, StSt and PP genomes. Of the seven microsatellite markers tested only the (GAAn trinucleotide sequence was appropriate for use as a single chromosome marker for the P. spicata AS chromosome. Based on COS marker analysis, the phylogenetic relationship between diploid wheatgrasses and the hexaploid bread wheat genomes was established. These findings confirmed that the J and E genomes are in neighbouring clusters.

  19. Uncovering the genetic architecture of seed weight and size in intermediate wheatgrass through linkage and association mapping

    Science.gov (United States)

    Intermediate wheatgrass (IWG); Thinopyrum intermedium) is being developed as a new perennial grain crop that has a large allohexaploid genome similar to that of wheat (Triticum aestivum). Breeding for increased seed weight is one of the primary goals for improving grain yield of IWG. As a new crop, ...

  20. Genetic and epigenetic changes in somatic hybrid introgression lines between wheat and tall wheatgrass.

    Science.gov (United States)

    Liu, Shuwei; Li, Fei; Kong, Lina; Sun, Yang; Qin, Lumin; Chen, Suiyun; Cui, Haifeng; Huang, Yinghua; Xia, Guangmin

    2015-04-01

    Broad phenotypic variations were induced in derivatives of an asymmetric somatic hybridization of bread wheat (Triticum aestivum) and tall wheatgrass (Thinopyrum ponticum Podp); however, how these variations occurred was unknown. We explored the nature of these variations by cytogenetic assays and DNA profiling techniques to characterize six genetically stable somatic introgression lines. Karyotyping results show the six lines similar to their wheat parent, but GISH analysis identified the presence of a number of short introgressed tall wheatgrass chromatin segments. DNA profiling revealed many genetic and epigenetic differences, including sequences deletions, altered regulation of gene expression, changed patterns of cytosine methylation, and the reactivation of retrotransposons. Phenotypic variations appear to result from altered repetitive sequences combined with the epigenetic regulation of gene expression and/or retrotransposon transposition. The extent of genetic and epigenetic variation due to the maintenance of parent wheat cells in tissue culture was assessed and shown to be considerably lower than had been induced in the introgression lines. Asymmetric somatic hybridization provides appropriate material to explore the nature of the genetic and epigenetic variations induced by genomic shock. Copyright © 2015 by the Genetics Society of America.

  1. Effects of blending wheatgrass juice on enhancing phenolic compounds and antioxidant activities of traditional kombucha beverage.

    Science.gov (United States)

    Sun, Tzu-Ying; Li, Jia-Shiun; Chen, Chinshuh

    2015-12-01

    Traditional kombucha is a fermented black tea extract and sugar. Sweetened black tea (10% w/v) and wheatgrass juice (WGJ) were mixed in various ratios and used as fermentation substrate for enhancing phenolic compounds and antioxidant activity. Starter, comprising of yeast (Dekkera bruxellensis) and acetic acid bacteria (Gluconacetobacter rhaeticus and Gluconobacter roseus), was inoculated at 20% (v/v), and fermented statically at 29 ± 1°C for 12 days. The results showed that the total phenolic and flavonoid contents and antioxidant activity of the modified kombucha were higher than those of traditional preparations. All WGJ-blended kombucha preparations were characterized as having higher concentrations of various phenolic compounds such as gallic acid, catechin, caffeic acid, ferulic acid, rutin, and chlorogenic acid as compared to traditional ones. Addition of WGJ resulted in the 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging ability of kombucha being > 90%, while the oxygen radical absorbance capacity increased from 5.0 μmol trolox equivalents/mL to 12.8 μmol trolox equivalents/mL as the ratio of WGJ increased from 0% to 67% (v/v). The highest antioxidant activity was obtained using a 1:1 (v/v) black tea decoction to WGJ ratio and 3 days of fermentation, producing various types of phenolic acids. These results suggest that intake of fermented black tea enhanced with wheatgrass juice is advantageous over traditional kombucha formulas in terms of providing various complementary phenolics and might have more potential to reduce oxidative stress. Copyright © 2015. Published by Elsevier B.V.

  2. Effects of blending wheatgrass juice on enhancing phenolic compounds and antioxidant activities of traditional kombucha beverage

    Directory of Open Access Journals (Sweden)

    Tzu-Ying Sun

    2015-12-01

    Full Text Available Traditional kombucha is a fermented black tea extract and sugar. Sweetened black tea (10% w/v and wheatgrass juice (WGJ were mixed in various ratios and used as fermentation substrate for enhancing phenolic compounds and antioxidant activity. Starter, comprising of yeast (Dekkera bruxellensis and acetic acid bacteria (Gluconacetobacter rhaeticus and Gluconobacter roseus, was inoculated at 20% (v/v, and fermented statically at 29 ± 1°C for 12 days. The results showed that the total phenolic and flavonoid contents and antioxidant activity of the modified kombucha were higher than those of traditional preparations. All WGJ-blended kombucha preparations were characterized as having higher concentrations of various phenolic compounds such as gallic acid, catechin, caffeic acid, ferulic acid, rutin, and chlorogenic acid as compared to traditional ones. Addition of WGJ resulted in the 1,1-diphenyl-2-picrylhydrazyl (DPPH scavenging ability of kombucha being > 90%, while the oxygen radical absorbance capacity increased from 5.0 μmol trolox equivalents/mL to 12.8 μmol trolox equivalents/mL as the ratio of WGJ increased from 0% to 67% (v/v. The highest antioxidant activity was obtained using a 1:1 (v/v black tea decoction to WGJ ratio and 3 days of fermentation, producing various types of phenolic acids. These results suggest that intake of fermented black tea enhanced with wheatgrass juice is advantageous over traditional kombucha formulas in terms of providing various complementary phenolics and might have more potential to reduce oxidative stress.

  3. Pre-harvest sprouting resistance and haplotype variation of ThVp-1 gene in the collection of wheat-wheatgrass hybrids

    Science.gov (United States)

    Kocheshkova, A. A.; Kroupin, P. Yu.; Bazhenov, M. S.; Karlov, G. I.; Pochtovyy, A. A.; Upelniek, V. P.; Belov, V. I.

    2017-01-01

    The germplasm collection of 87 wheat-wheatgrass hybrids developed in Tsitisin Main Botanical Garden (Russia, Moscow) was evaluated for resistance to pre-harvest sprouting (PHS) by spike sprouting (SS) and germination index (GI) assays as well as for spike and grain features. The PHS resistance variation and haplotype polymorphism of the wheatgrass ThVp-1 and wheat TaVp-1B genes orthologues of Vp-1 was revealed in the studied collection. Four haplotypes of ThVp-1 were revealed: ThVp-1a (41% of the entries), ThVp-1b (13%), ThVp-1c (29%), and ThVp-1d (15%). The association between the allelic state of ThVp-1 and PHS resistance in the wheat-wheatgrass hybrids was shown: haplotype ThVp-1d of the wheatgrass Vp-1 gene is significantly associated with reduced PHS in the wheat-wheatgrass hybrids (mean SS 0.33, mean GI 0.64). The resistant entries may be perspective as a source of PHS resistance in the development of commercial cultivars of perennial wheat. PMID:29131854

  4. Phenolic Content and Antioxidant Activity in Raw and Denatured Aqueous Extracts from Sprouts and Wheatgrass of Einkorn and Emmer Obtained under Salinity.

    Science.gov (United States)

    Falcinelli, Beatrice; Benincasa, Paolo; Calzuola, Isabella; Gigliarelli, Lilia; Lutts, Stanley; Marsili, Valeria

    2017-12-02

    Total phenolic content (TPC), reducing power (RP), superoxide radical scavenging (RS), and thiobarbituric acid reactive substances (TBARS) production inhibition were measured in raw and denatured aqueous extracts from sprouts and wheatgrass of einkorn and emmer obtained at increasing salinity. Grains were incubated and kept at 0, 25, 50, and 100 mM NaCl until either sprout or wheatgrass stage. Additionally, a recovery treatment was included, in which sprouts obtained at 100 mM NaCl were then transferred at 0 mM NaCl until wheatgrass stage. All parameters (TPC, RP, RS, and TBARS production inhibition) increased with sprouting and were highest in wheatgrass. Salinity increased all parameters, but the effect varied with NaCl concentration, genotype, developmental stage, and plant material processing (raw or denatured). Overall, given the delay and limitation of growth at high NaCl concentration, the best compromise appears to be the application of a moderate salinity (25 to 50 mM NaCl). In denatured extracts, TPC, RP, and RS slightly decreased, and TBARS was not affected, which means that antioxidant activity was mainly related to compounds other than enzymes and peptides, and thus it can be assumed to remain after digestion. Thus, supplementing the human diet with einkorn or emmer sprouts and wheatgrass can actually benefit health.

  5. Ramet spacing of Elymus lanceolatus (thickspike wheatgrass) in response to neighbor density

    Science.gov (United States)

    Humphrey, L.D.; Pyke, David A.

    2001-01-01

    Many plants exploit patchy resources through clonal foraging. Plants established in field plots were used to determine if Elymus lanceolatus ssp. lanceolatus (Scribner et J.G. Smith) Gould (thickspike wheatgrass) showed a clonal foraging response to neighbour densities, as it had previously shown to patchy soil nutrients. Neighbours consisted of the rhizomatous E. lanceolatus ssp. lanceolatus and the bunchgrass Elymus lanceolatus ssp. wawawaiensis (Scribner et Gould) J.R. Carlson et D.R. Dewey (proposed name), which are both native to the semiarid western U.S.A., and their ratios as well as total densities varied. Rather than an increase in spacing of exploratory ramets at high densities, as expected with clonal foraging, there was a decrease in spacing in both years of the experiment. Fewer target plants produced exploratory ramets at higher densities only in the second year. These reductions in exploratory clonal growth at higher neighbour densities, which were opposite to E. lanceolatus ssp. lanceolatus' response to low-resource patches, occurred perhaps because soil resource levels were too low overall to support rhizome production, and this condition was more pronounced in the second year. Physical resistance from neighbour roots perhaps also reduced rhizome production. However, rhizome growth may not be beneficial in such cases, and plants may be adapted to produce exploratory rhizomes only when some high-resource patches are encountered by the clone.

  6. Genetic Diversity of Northern Wheatgrass (Elymus lanceolatus ssp. lanceolatus as Revealed by Genotyping-by-Sequencing

    Directory of Open Access Journals (Sweden)

    Pingchuan Li

    2018-04-01

    Full Text Available Recent advances in next generation sequencing technologies make genotyping-by-sequencing (GBS more feasible for the molecular characterization of plant germplasm with complex and unsequenced genomes. This study represents the first preliminary effort using GBS to discover genome-wide genetic variants of northern wheatgrass (Elymus lanceolatus ssp. lanceolatus (Scribn. and J. G. Sm. Gould plants and to assess the genetic diversity present in four cultivated and six wild accessions. The effort generated the first novel set of genomic resources and 5659 single nucleotide polymorphism (SNP markers for this tetraploid grass. The diversity analysis revealed 8.8% of SNP variation residing among the 10 accessions and 1.9% SNP variation present between cultivated and wild accessions. The Bayesian analysis identified three major clusters of the assayed samples, and the principal coordinates analysis revealed the genetic distinctness of the two accessions collected from Nevada and Wyoming. The flow cytometry analysis confirmed the tetraploid nature of some of the assayed samples and estimated the average genome size to be 9.3–9.4 Gb for this species. These findings are useful for the genetic improvement of this native grass species for forage production and rangeland reclamation. The findings are also encouraging for the broad application of genotyping-by-sequencing in the characterization of genome-wide genetic variability in non-model polyploid plants.

  7. Selectivity of Some Herbicides to Standard Wheatgrass (Agropyron desertorum (Fisch. Schultes During Stand Establishment and Seed Production

    Directory of Open Access Journals (Sweden)

    Aneliya Katova

    2013-01-01

    Full Text Available A study was conducted in the experimental field of the Institute of Forage Crops –Pleven on a slightly leached chernozem soil in 2011-2012 to determine the selectivity ofsome herbicides to standard wheatgrass (Agropyron desertorum (Fisch. Schultes duringstand establishment and its seed production. The study had the following results: the herbicidesKambio SL (320 g/l bentazone + 90 g/l dicamba – 1250 ml/ha; Kalam (125 g/l tritosulfuron+ 600 g/kg dicamba – 200 g/ha; Lintur 70 WG (4.1% triasulfuron + 65.9% dicamba– 150 g/ha, and Axial 050ЕK (50 g/l pinoxaden – 600 ml/ha showed high selectivityto standard wheatgrass when applied at the stage of 3-4 leaves during the year of standestablishment; the herbicides Imaspro (69 g/l fenoxaprop-P-ethyl+antidote and Stelar (50g/l topramezone + 160 g/l dicamba, each applied at the rate of 1000 ml/ha, caused phytotoxicity(scores from 4 to 6, while Termidor (40 g/l nicosulfuron – 1250 ml/ha completelydestroyed the crop (score 9; the herbicides Kambio SL; Kalam; Lintur 70WG and Axial 050ЕKapplied at the same doses at the stage from spring growth to the beginning of shootingup in the seed production year had a high selectivity to standard wheatgrass and could beapplied in seed production stands without negative influence on seed productivity. Theherbicide Termidor was very phytotoxic (scores from 3 to 7 and prevented the formationof generative stems.

  8. Effect of wheatgrass on membrane fatty acid composition during hepatotoxicity induced by alcohol and heated PUFA.

    Science.gov (United States)

    Durairaj, Varalakshmi; Shakya, Garima; Pajaniradje, Sankar; Rajagopalan, Rukkumani

    2014-06-01

    Alcoholism is a broad term used for problems related to alcohol, medically considered as disease, specifically an addictive illness, abuse, and dependence. It is the major cause of liver disease in western countries. Alcoholic liver disease encompasses the hepatic alterations leading to fatty liver, hepatitis, and fibrosis or cirrhosis. Fried food items prepared with repeatedly heated polyunsaturated fatty acid (PUFA) exacerbate the disturbances induced by alcohol. The use of herbs to treat diseases is almost universal. Wheatgrass (WG) is used as a supplemental nutrition because of its unique curative properties. As it has antioxidant property, it prevents cancer, diabetes, and acts as liver cleanser. The present study was undertaken to evaluate the efficacy of WG on preserving membrane integrity in liver damage induced by alcohol and heated PUFA (ΔPUFA).The rats were divided into four groups. The animals in group 1 served as normal (standard diet), group 2 served as hepatotoxic (alcohol + ΔPUFA), group 3 served as treated (alcohol + ΔPUFA + WG), and group 4 served as WG control. The compositions of membrane fatty acid, total phospholipids, phospholipase A, C (PLA and PLC) were analyzed in liver to evaluate the effects of WG. Changes in fatty acid composition, decrease in phospholipids levels, and increase in PLA, PLC were observed in the diseased group. Restoration effect was seen in WG-treated rats. Histopathological observations were in correlation with the biochemical parameters. From the results obtained, we conclude that WG effectively protects the liver against alcohol and ΔPUFA-induced changes in fatty acid composition and preserves membrane integrity.

  9. Wheatgrass-Derived Polysaccharide Has Antiinflammatory, Anti-Oxidative and Anti-Apoptotic Effects on LPS-Induced Hepatic Injury in Mice.

    Science.gov (United States)

    Nepali, Sarmila; Ki, Hyeon-Hui; Lee, Ji-Hyun; Lee, Hoon-Yeon; Kim, Dae-Ki; Lee, Young-Mi

    2017-07-01

    Hepatic injury occurs frequently during sepsis, and polysaccharides isolated from plants have been reported to have antiinflammatory and antioxidant effects in various models. However, the effect of wheatgrass-derived polysaccharide (WGP) has not been previously studied. In the present study, we investigated the effect of WGP on lipopolysaccharide (LPS)-induced hepatic injury in mice. Mice were pre-treated with WGP (100 or 200 mg/kg daily for 2 days) and then challenged with LPS (1 mg/kg, intraperitoneal), and sacrificed after 12 h. Wheatgrass-derived polysaccharide decreased serum aminotransferase levels and histological changes as compared with LPS-challenged mice. Wheatgrass-derived polysaccharide also significantly inhibited LPS-induced pro-inflammatory cytokine up-regulation and improved the oxidative status of liver tissues. Furthermore, these effects were found to be mediated by the suppression of the transcriptional activity of nuclear factor-kappa B (NF-κB), due to inhibitions of transforming growth factor beta (TGF-β)-activated kinase (TAK)-1 phosphorylation and inhibition of kappa B (IκB)-α degradation. In addition, WGP inhibited the activations of mitogen-activated protein kinases (MAPKs). Wheatgrass-derived polysaccharide also attenuated hepatic cell death by modulating caspase-3 and apoptosis associated mitochondrial proteins, such as, B-cell lymphoma 2 (Bcl-2) and Bcl-2-associated X (Bax). Taken together, WGP possesses antiinflammatory, anti-oxidant and anti-apoptotic activity and ameliorates LPS-induced liver injury in mice. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  10. Interaction of SiO2 Nanoparticles with Seed Prechilling on Germination and Early Seedling Growth of Tall Wheatgrass (Agropyron Elongatum L.

    Directory of Open Access Journals (Sweden)

    Azimi Reyhane

    2014-09-01

    Full Text Available The effect of six SiO2 nanosized concentrations (0, 5, 20, 40, 60 and 80 mg L-1 and three seed prechilling treatments (control, seed prechilling before nano SiO2 treatments, treatments of seed with nano SiO2 before prechilling on germination and seedling growth of tall wheatgrass (Agropyron elongatum L. were studied. Results indicated that application of SiO2 nanoparticles significantly increased seed germination of tall wheatgrass from 58 percent in control group to 86.3 and 85.7 percent in 40 and 60 mg L-1, respectively. Applying SiO2 nanoparticles increased dry weight of shoot, root and seedling of tall wheatgrass. Increasing concentration of nanoparticle from 0 up to 40 mg L-1 increased seedling weight around 49 percent compared to the control, nevertheless decreased under 60 and 80 mg L-1 treatments. In conclusion, seed prechilling in combination with SiO2 nanoparticles largely broke the seed dormancy for A. elongatum.

  11. Mixture Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.

    2007-12-01

    A mixture experiment involves combining two or more components in various proportions or amounts and then measuring one or more responses for the resulting end products. Other factors that affect the response(s), such as process variables and/or the total amount of the mixture, may also be studied in the experiment. A mixture experiment design specifies the combinations of mixture components and other experimental factors (if any) to be studied and the response variable(s) to be measured. Mixture experiment data analyses are then used to achieve the desired goals, which may include (i) understanding the effects of components and other factors on the response(s), (ii) identifying components and other factors with significant and nonsignificant effects on the response(s), (iii) developing models for predicting the response(s) as functions of the mixture components and any other factors, and (iv) developing end-products with desired values and uncertainties of the response(s). Given a mixture experiment problem, a practitioner must consider the possible approaches for designing the experiment and analyzing the data, and then select the approach best suited to the problem. Eight possible approaches include 1) component proportions, 2) mathematically independent variables, 3) slack variable, 4) mixture amount, 5) component amounts, 6) mixture process variable, 7) mixture of mixtures, and 8) multi-factor mixture. The article provides an overview of the mixture experiment designs, models, and data analyses for these approaches.

  12. Rathayibacter agropyri (non O'Gara, 1916) comb. nov., nom. rev., isolated from western wheatgrass (Pascopyrum smithii).

    Science.gov (United States)

    Schroeder, Brenda K; Schneider, William L; Luster, Douglas G; Sechler, Aaron; Murray, Timothy D

    2018-03-20

    Aplanobacter agropyri was first described in 1915 by O'Gara and later transferred to the genus Corynebacterium by Burkholder in 1948 but it was not included in the Approved Lists of Bacterial Names in 1980 and, consequently, is not recognized as a validly published species. In the 1980s, bacteria resembling Corynebacterium agropyri were isolated from plant samples stored at the Washington State Mycological Herbarium and from a diseased wheatgrass plant collected in Cardwell, Montana, USA. In the framework of this study, eight additional isolates were recovered from the same herbarium plant samples in 2011. The isolates are slow-growing, yellow-pigmented, Gram-stain-positive and coryneform. The peptidoglycan is type B2γ containing diaminobutyric acid, alanine, glycine and glutamic acid, the cell-wall sugars are rhamnose and mannose, the major respiratory quinone is MK-10, and the major fatty acids are anteiso-15 : 0, anteiso 17 : 0 and iso-16 : 0, all of which are typical of the genus Rathayibacter. Phylogenetic analysis of 16S rRNA gene sequences placed the strains in the genus Rathayibacter and distinguished them from the six other described species of Rathayibacter. DNA-DNA hybridization confirmed that the strains were members of a novel species. Based on phenotypic, chemotaxonomic and phylogenetic characterization, it appears that strains CA-1 to CA-12 represent a novel species, and the name Rathayibacter agropyri (non O'Gara, 1916) comb. nov., nom. rev. is proposed; the type strain is CA-4 T (=DSM 104101 T ;=ATCC TSD-78 T ).

  13. Ensilage of oats and wheatgrass under natural alpine climatic conditions by indigenous lactic acid bacteria species isolated from high-cold areas.

    Science.gov (United States)

    Zhang, Miao; Wang, Xiaojie; Cui, Meiyan; Wang, Yanping; Jiao, Zhen; Tan, Zhongfang

    2018-01-01

    Five different species of selected broad-spectrum antibiotic lactic acid bacteria isolated from extremely high-cold areas were used as starters to ferment indigenous forage oats and wheatgrass under rigid alpine climatic conditions. The five isolates were Lactobacillus plantarum QZ227, Enterococcus mundtii QZ251, Pediococcus cellicola QZ311, Leuconostoc mesenteroides QZ1137 and Lactococcus lactis QZ613, and commercial Lactobacillus plantarum FG1 was used as the positive control and sterile water as the negative control. The minimum and maximum temperatures were -22°C and 23°C during the fermentation process, respectively. The pH of wheatgrass silage fermented by the QZ227 and FG1 inocula reached the expected values (≤4.15) although the pathogens detected in the silage should be further investigated. All of the inocula additives used in this study were effective in improving the fermentation quality of oat silage as indicated by the higher content of lactic acid, lower pH values (≤4.17) and significant inhibition of pathogens. QZ227 exhibited a fermentation ability that was comparable with the commercial inoculum FG1 for the whole process, and the deterioration rate was significantly lower than for FG1 after storage for 7 months. The pathogens Escherichia coli, mold and yeast were counted and isolated from the deteriorated silage. E. coli were the main NH3-N producer while F. fungi and yeast produced very little.

  14. Optimal mixture experiments

    CERN Document Server

    Sinha, B K; Pal, Manisha; Das, P

    2014-01-01

    The book dwells mainly on the optimality aspects of mixture designs. As mixture models are a special case of regression models, a general discussion on regression designs has been presented, which includes topics like continuous designs, de la Garza phenomenon, Loewner order domination, Equivalence theorems for different optimality criteria and standard optimality results for single variable polynomial regression and multivariate linear and quadratic regression models. This is followed by a review of the available literature on estimation of parameters in mixture models. Based on recent research findings, the volume also introduces optimal mixture designs for estimation of optimum mixing proportions in different mixture models, which include Scheffé’s quadratic model, Darroch-Waller model, log- contrast model, mixture-amount models, random coefficient models and multi-response model.  Robust mixture designs and mixture designs in blocks have been also reviewed. Moreover, some applications of mixture desig...

  15. Liquids and liquid mixtures

    CERN Document Server

    Rowlinson, J S; Baldwin, J E; Buckingham, A D; Danishefsky, S

    2013-01-01

    Liquids and Liquid Mixtures, Third Edition explores the equilibrium properties of liquids and liquid mixtures and relates them to the properties of the constituent molecules using the methods of statistical thermodynamics. Topics covered include the critical state, fluid mixtures at high pressures, and the statistical thermodynamics of fluids and mixtures. This book consists of eight chapters and begins with an overview of the liquid state and the thermodynamic properties of liquids and liquid mixtures, including vapor pressure and heat capacities. The discussion then turns to the thermodynami

  16. Perception of trigeminal mixtures.

    Science.gov (United States)

    Filiou, Renée-Pier; Lepore, Franco; Bryant, Bruce; Lundström, Johan N; Frasnelli, Johannes

    2015-01-01

    The trigeminal system is a chemical sense allowing for the perception of chemosensory information in our environment. However, contrary to smell and taste, we lack a thorough understanding of the trigeminal processing of mixtures. We, therefore, investigated trigeminal perception using mixtures of 3 relatively receptor-specific agonists together with one control odor in different proportions to determine basic perceptual dimensions of trigeminal perception. We found that 4 main dimensions were linked to trigeminal perception: sensations of intensity, warmth, coldness, and pain. We subsequently investigated perception of binary mixtures of trigeminal stimuli by means of these 4 perceptual dimensions using different concentrations of a cooling stimulus (eucalyptol) mixed with a stimulus that evokes warmth perception (cinnamaldehyde). To determine if sensory interactions are mainly of central or peripheral origin, we presented stimuli in a physical "mixture" or as a "combination" presented separately to individual nostrils. Results showed that mixtures generally yielded higher ratings than combinations on the trigeminal dimensions "intensity," "warm," and "painful," whereas combinations yielded higher ratings than mixtures on the trigeminal dimension "cold." These results suggest dimension-specific interactions in the perception of trigeminal mixtures, which may be explained by particular interactions that may take place on peripheral or central levels. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. Identifying Mixtures of Mixtures Using Bayesian Estimation

    Science.gov (United States)

    Malsiner-Walli, Gertraud; Frühwirth-Schnatter, Sylvia; Grün, Bettina

    2017-01-01

    ABSTRACT The use of a finite mixture of normal distributions in model-based clustering allows us to capture non-Gaussian data clusters. However, identifying the clusters from the normal components is challenging and in general either achieved by imposing constraints on the model or by using post-processing procedures. Within the Bayesian framework, we propose a different approach based on sparse finite mixtures to achieve identifiability. We specify a hierarchical prior, where the hyperparameters are carefully selected such that they are reflective of the cluster structure aimed at. In addition, this prior allows us to estimate the model using standard MCMC sampling methods. In combination with a post-processing approach which resolves the label switching issue and results in an identified model, our approach allows us to simultaneously (1) determine the number of clusters, (2) flexibly approximate the cluster distributions in a semiparametric way using finite mixtures of normals and (3) identify cluster-specific parameters and classify observations. The proposed approach is illustrated in two simulation studies and on benchmark datasets. Supplementary materials for this article are available online. PMID:28626349

  18. SEPARATION OF FLUID MIXTURES

    Science.gov (United States)

    Lipscomb, R.; Craig, A.; Labrow, S.; Dunn, J.F.

    1958-10-28

    An apparatus is presented for separating gaseous mixtures by selectively freezing a constituent of the mixture and subsequently separating the frozen gas. The gas mixture is passed through a cylinder fltted with a cooling jacket, causing one gas to freeze on the walls of the cylinder. A set of scraper blades are provided in the interior of the cyllnder, and as the blades oscillate, the frozen gas is scraped to the bottom of the cylinder. Means are provided for the frozen material to pass into a heating chamber where it is vaporized and the product gas collected.

  19. Iterative Mixture Component Pruning Algorithm for Gaussian Mixture PHD Filter

    Directory of Open Access Journals (Sweden)

    Xiaoxi Yan

    2014-01-01

    Full Text Available As far as the increasing number of mixture components in the Gaussian mixture PHD filter is concerned, an iterative mixture component pruning algorithm is proposed. The pruning algorithm is based on maximizing the posterior probability density of the mixture weights. The entropy distribution of the mixture weights is adopted as the prior distribution of mixture component parameters. The iterative update formulations of the mixture weights are derived by Lagrange multiplier and Lambert W function. Mixture components, whose weights become negative during iterative procedure, are pruned by setting corresponding mixture weights to zeros. In addition, multiple mixture components with similar parameters describing the same PHD peak can be merged into one mixture component in the algorithm. Simulation results show that the proposed iterative mixture component pruning algorithm is superior to the typical pruning algorithm based on thresholds.

  20. Mixtures Estimation and Applications

    CERN Document Server

    Mengersen, Kerrie; Titterington, Mike

    2011-01-01

    This book uses the EM (expectation maximization) algorithm to simultaneously estimate the missing data and unknown parameter(s) associated with a data set. The parameters describe the component distributions of the mixture; the distributions may be continuous or discrete. The editors provide a complete account of the applications, mathematical structure and statistical analysis of finite mixture distributions along with MCMC computational methods, together with a range of detailed discussions covering the applications of the methods and features chapters from the leading experts on the subject

  1. I-optimal mixture designs

    OpenAIRE

    GOOS, Peter; JONES, Bradley; SYAFITRI, Utami

    2013-01-01

    In mixture experiments, the factors under study are proportions of the ingredients of a mixture. The special nature of the factors in a mixture experiment necessitates specific types of regression models, and specific types of experimental designs. Although mixture experiments usually are intended to predict the response(s) for all possible formulations of the mixture and to identify optimal proportions for each of the ingredients, little research has been done concerning their I-optimal desi...

  2. Mixture based outlier filtration

    Czech Academy of Sciences Publication Activity Database

    Pecherková, Pavla; Nagy, Ivan

    2006-01-01

    Roč. 46, č. 2 (2006), s. 30-35 ISSN 1210-2709 R&D Projects: GA MŠk 1M0572; GA MDS 1F43A/003/120 Institutional research plan: CEZ:AV0Z10750506 Keywords : data filtration * system modelling * mixture models Subject RIV: BD - Theory of Information http://library.utia.cas.cz/prace/20060165.pdf

  3. Separating Underdetermined Convolutive Speech Mixtures

    DEFF Research Database (Denmark)

    Pedersen, Michael Syskind; Wang, DeLiang; Larsen, Jan

    2006-01-01

    a method for underdetermined blind source separation of convolutive mixtures. The proposed framework is applicable for separation of instantaneous as well as convolutive speech mixtures. It is possible to iteratively extract each speech signal from the mixture by combining blind source separation...

  4. Mixtures of truncated basis functions

    DEFF Research Database (Denmark)

    Langseth, Helge; Nielsen, Thomas Dyhre; Rumí, Rafael

    2012-01-01

    In this paper we propose a framework, called mixtures of truncated basis functions (MoTBFs), for representing general hybrid Bayesian networks. The proposed framework generalizes both the mixture of truncated exponentials (MTEs) framework and the mixture of polynomials (MoPs) framework. Similar...

  5. Separation of gas mixtures

    International Nuclear Information System (INIS)

    1981-01-01

    Apparatus is described for the separation of a gaseous plasma mixture into components in some of which the original concentration of a specific ion has been greatly increased or decreased, comprising: a source for converting the gaseous mixture into a train of plasma packets; an open-ended vessel with a main section and at least one branch section, adapted to enclose along predetermined tracks the original plasma packets in the main section, and the separated plasma components in the branch sections; drive means for generating travelling magnetic waves along the predetermined tracks with the magnetic flux vector of the waves transverse to each of the tracks; and means for maintaining phase coherence between the plasma packets and the magnetic waves at a value needed for accelerating the components of the packets to different velocities and in such different directions that the plasma of each packet is divided into distinctly separate packets in some of which the original concentration of a specific ion has been greatly increased or decreased, and which plasma packets are collected from the branch sections of the vessels. (author)

  6. Research of Deformation of Clay Soil Mixtures Mixtures

    OpenAIRE

    Romas Girkontas; Tadas Tamošiūnas; Andrius Savickas

    2014-01-01

    The aim of this article is to determine clay soils and clay soils mixtures deformations during drying. Experiments consisted from: a) clay and clay mixtures bridges (height ~ 0,30 m, span ~ 1,00 m); b) tiles of clay and clay, sand and straw (height, length, wide); c) cylinders of clay; clay and straw; clay, straw and sand (diameter; height). According to the findings recommendations for clay and clay mixtures drying technology application were presented. During the experiment clay bridge bear...

  7. Concomitant variables in finite mixture models

    NARCIS (Netherlands)

    Wedel, M

    The standard mixture model, the concomitant variable mixture model, the mixture regression model and the concomitant variable mixture regression model all enable simultaneous identification and description of groups of observations. This study reviews the different ways in which dependencies among

  8. Mutagenicity of complex mixtures

    International Nuclear Information System (INIS)

    Pelroy, R.A.

    1985-01-01

    The effect of coal-derived complex chemical mixtures on the mutagenicity of 6-aminochrysene (6-AC) was determined with Salmonella typhimurium TA98. Previous results suggested that the mutagenic potency of 6-AC for TA98 in the standard microsomal activation (Ames) assay increased if it was presented to the cells mixed with high-boiling coal liquids (CL) from the solvent refined coal (SRC) process. In this year's work, the apparent mutational synergism of CL and 6-AC was independently verified in a fluctuation bioassay which allowed quantitation of mutational frequencies and cell viability. The results of this assay system were similar to those in the Ames assay. Moreover, the fluctation assay revealed that mutagenesis and cellular toxicity induced by 6-AC were both strongly enhanced if 6-AC was presented to the cells mixed in a high-boiling CL. 4 figures

  9. Neurotoxicity of Metal Mixtures.

    Science.gov (United States)

    Andrade, V M; Aschner, M; Marreilha Dos Santos, A P

    2017-01-01

    Metals are the oldest toxins known to humans. Metals differ from other toxic substances in that they are neither created nor destroyed by humans (Casarett and Doull's, Toxicology: the basic science of poisons, 8th edn. McGraw-Hill, London, 2013). Metals are of great importance in our daily life and their frequent use makes their omnipresence and a constant source of human exposure. Metals such as arsenic [As], lead [Pb], mercury [Hg], aluminum [Al] and cadmium [Cd] do not have any specific role in an organism and can be toxic even at low levels. The Substance Priority List of Agency for Toxic Substances and Disease Registry (ATSDR) ranked substances based on a combination of their frequency, toxicity, and potential for human exposure. In this list, As, Pb, Hg, and Cd occupy the first, second, third, and seventh positions, respectively (ATSDR, Priority list of hazardous substances. U.S. Department of Health and Human Services, Public Health Service, Atlanta, 2016). Besides existing individually, these metals are also (or mainly) found as mixtures in various parts of the ecosystem (Cobbina SJ, Chen Y, Zhou Z, Wub X, Feng W, Wang W, Mao G, Xu H, Zhang Z, Wua X, Yang L, Chemosphere 132:79-86, 2015). Interactions among components of a mixture may change toxicokinetics and toxicodynamics (Spurgeon DJ, Jones OAH, Dorne J-L, Svendsen C, Swain S, Stürzenbaum SR, Sci Total Environ 408:3725-3734, 2010) and may result in greater (synergistic) toxicity (Lister LJ, Svendsen C, Wright J, Hooper HL, Spurgeon DJ, Environ Int 37:663-670, 2011). This is particularly worrisome when the components of the mixture individually attack the same organs. On the other hand, metals such as manganese [Mn], iron [Fe], copper [Cu], and zinc [Zn] are essential metals, and their presence in the body below or above homeostatic levels can also lead to disease states (Annangi B, Bonassi S, Marcos R, Hernández A, Mutat Res 770(Pt A):140-161, 2016). Pb, As, Cd, and Hg can induce Fe, Cu, and Zn

  10. Complex mixtures biostudies

    International Nuclear Information System (INIS)

    Springer, D.L.

    1987-01-01

    The objective of the project is to identify potential adverse biological activities associated with human exposures to complex organic mixtures (COM) from energy-related industries. Studies to identify the influence of chemical class fractions from a COM on the initiating activity of a known carcinogen, benzo(a)pyrene (BaP), demonstrated that the polycyclic aromatic hydrocarbons (PAH) and nitrogen-containing polycyclic aromatic compound (NPAC) fractions were the most effective inhibitors of initiation. In an effort to determine the contribution of BaP to the initiating activity of the COM, binding of radiolabeled BaP to mouse skin DNA was measured. Results indicated that binding of BaP to DNA decreased in the presence of the COM so that at initiating COM doses, BaP binding was near the limit detection. Addition of unlabeled BaP to the COM at an amount similar to that originally present in the COM did not significantly increase the binding. Studies to determine the rates of disappearance of carcinogenic PAH from the site of application on the skin indicated that half-lives for PAH differed by a factor of about 2. Analytical methods developed to identify PAH from COM which covalently bind to DNA demonstrated that the lower level of detection is approximately 200 picograms. Developmental studies demonstrated that both pregnant rats and mice treated dermally with a high-boiling COM developed fetuses with major malformations including cleft palate, small lungs, edema, and sagittal suture hemorrhages. 3 figures, 5 tables

  11. Thermophysical Properties of Hydrocarbon Mixtures

    Science.gov (United States)

    SRD 4 NIST Thermophysical Properties of Hydrocarbon Mixtures (PC database for purchase)   Interactive computer program for predicting thermodynamic and transport properties of pure fluids and fluid mixtures containing up to 20 components. The components are selected from a database of 196 components, mostly hydrocarbons.

  12. Easy and flexible mixture distributions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Mabit, Stefan L.

    2013-01-01

    We propose a method to generate flexible mixture distributions that are useful for estimating models such as the mixed logit model using simulation. The method is easy to implement, yet it can approximate essentially any mixture distribution. We test it with good results in a simulation study...

  13. Nonlinearity of bituminous mixtures

    Science.gov (United States)

    Mangiafico, S.; Babadopulos, L. F. A. L.; Sauzéat, C.; Di Benedetto, H.

    2018-02-01

    This paper presents an experimental characterization of the strain dependency of the complex modulus of bituminous mixtures for strain amplitude levels lower than about 110 μm/m. A series of strain amplitude sweep tests are performed at different temperatures (8, 10, 12 and 14°C) and frequencies (0.3, 1, 3 and 10 Hz), during which complex modulus is monitored. For each combination of temperature and frequency, four maximum strain amplitudes are targeted (50, 75, 100 and 110 μm/m). For each of them, two series of 50 loading cycles are applied, respectively at decreasing and increasing strain amplitudes. Before each decreasing strain sweep and after each increasing strain sweep, 5 cycles are performed at constant maximum targeted strain amplitude. Experimental results show that the behavior of the studied material is strain dependent. The norm of the complex modulus decreases and phase angle increases with strain amplitude. Results are presented in Black and Cole-Cole plots, where characteristic directions of nonlinearity can be identified. Both the effects of nonlinearity in terms of the complex modulus variation and of the direction of nonlinearity in Black space seem to validate the time-temperature superposition principle with the same shift factors as for linear viscoelasticity. The comparison between results obtained during increasing and decreasing strain sweeps suggests the existence of another phenomenon occurring during cyclic loading, which appears to systematically induce a decrease of the norm of the complex modulus and an increase of the phase angle, regardless of the type of the strain sweep (increasing or decreasing).

  14. Evaluation of superpave mixtures containing hydrated lime.

    Science.gov (United States)

    2013-07-01

    The use of hydrated lime in Hot-Mix Asphalt (HMA) mixtures can reduce permanent deformation, long-term aging, and moisture : susceptibility of mixtures. In addition, hydrated lime increases the stiffness and fatigue resistance of mixtures. This study...

  15. Performance evaluation of Louisiana superpave mixtures.

    Science.gov (United States)

    2008-12-01

    This report documents the performance of Louisiana Superpave mixtures through laboratory mechanistic tests, mixture : volumetric properties, gradation analysis, and early field performance. Thirty Superpave mixtures were evaluated in this : study. Fo...

  16. Nonparametric e-Mixture Estimation.

    Science.gov (United States)

    Takano, Ken; Hino, Hideitsu; Akaho, Shotaro; Murata, Noboru

    2016-12-01

    This study considers the common situation in data analysis when there are few observations of the distribution of interest or the target distribution, while abundant observations are available from auxiliary distributions. In this situation, it is natural to compensate for the lack of data from the target distribution by using data sets from these auxiliary distributions-in other words, approximating the target distribution in a subspace spanned by a set of auxiliary distributions. Mixture modeling is one of the simplest ways to integrate information from the target and auxiliary distributions in order to express the target distribution as accurately as possible. There are two typical mixtures in the context of information geometry: the [Formula: see text]- and [Formula: see text]-mixtures. The [Formula: see text]-mixture is applied in a variety of research fields because of the presence of the well-known expectation-maximazation algorithm for parameter estimation, whereas the [Formula: see text]-mixture is rarely used because of its difficulty of estimation, particularly for nonparametric models. The [Formula: see text]-mixture, however, is a well-tempered distribution that satisfies the principle of maximum entropy. To model a target distribution with scarce observations accurately, this letter proposes a novel framework for a nonparametric modeling of the [Formula: see text]-mixture and a geometrically inspired estimation algorithm. As numerical examples of the proposed framework, a transfer learning setup is considered. The experimental results show that this framework works well for three types of synthetic data sets, as well as an EEG real-world data set.

  17. Mixtures of skewed Kalman filters

    KAUST Repository

    Kim, Hyoungmoon

    2014-01-01

    Normal state-space models are prevalent, but to increase the applicability of the Kalman filter, we propose mixtures of skewed, and extended skewed, Kalman filters. To do so, the closed skew-normal distribution is extended to a scale mixture class of closed skew-normal distributions. Some basic properties are derived and a class of closed skew. t distributions is obtained. Our suggested family of distributions is skewed and has heavy tails too, so it is appropriate for robust analysis. Our proposed special sequential Monte Carlo methods use a random mixture of the closed skew-normal distributions to approximate a target distribution. Hence it is possible to handle skewed and heavy tailed data simultaneously. These methods are illustrated with numerical experiments. © 2013 Elsevier Inc.

  18. Bayesian Kernel Mixtures for Counts.

    Science.gov (United States)

    Canale, Antonio; Dunson, David B

    2011-12-01

    Although Bayesian nonparametric mixture models for continuous data are well developed, there is a limited literature on related approaches for count data. A common strategy is to use a mixture of Poissons, which unfortunately is quite restrictive in not accounting for distributions having variance less than the mean. Other approaches include mixing multinomials, which requires finite support, and using a Dirichlet process prior with a Poisson base measure, which does not allow smooth deviations from the Poisson. As a broad class of alternative models, we propose to use nonparametric mixtures of rounded continuous kernels. An efficient Gibbs sampler is developed for posterior computation, and a simulation study is performed to assess performance. Focusing on the rounded Gaussian case, we generalize the modeling framework to account for multivariate count data, joint modeling with continuous and categorical variables, and other complications. The methods are illustrated through applications to a developmental toxicity study and marketing data. This article has supplementary material online.

  19. Preparation of conducting solid mixtures

    International Nuclear Information System (INIS)

    Spokas, J.J.

    1978-01-01

    The application of conducting plastic mixtures to the fundamental problem of radiation dosimetry is briefly reviewed. A particular approach to achieving formulations with the necessary characteristics is described. A number of successful mixtures are defined for a number of different specific dosimetry situations. To obtain high quality stable materials requires intense blending and working of the materials at elevated temperatures. One machine that succeeds in this task is the Shonka plastics mixer-extruder. The Shonka mixer is described in complete detail. The procedures used in preparing representative formulations with this device are presented. A number of properties of successful conducting mixtures so prepared are summarized. The conditions required for molding such material are given. Several special welding methods for specific application with these formulations have been devised and are described

  20. 16 CFR 1500.5 - Hazardous mixtures.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Hazardous mixtures. 1500.5 Section 1500.5... HAZARDOUS SUBSTANCES AND ARTICLES; ADMINISTRATION AND ENFORCEMENT REGULATIONS § 1500.5 Hazardous mixtures. For a mixture of substances, the determination of whether the mixture is a “hazardous substance” as...

  1. Ecological Assembly of Chemical Mixtures

    Science.gov (United States)

    Human-environment interactions have a significant role in the formation of chemical mixtures in the environment and by extension in human tissues and fluids. These interactions, which include decisions to purchase and use products containing chemicals as well as behaviors and act...

  2. Characterization of bioactive mixtures oligogalacturonidos

    International Nuclear Information System (INIS)

    Mederos Torres, Yuliem; Hormaza Montenegro, Josefa; Reynaldo Escobar, Ines; Montesino Sequi, Raquel

    2011-01-01

    Oligogalacturonides are pectic oligosaccharides composed of lineal chains of D-galacturonic acid, linked by α (1-4) glycosidic linkage. Oligogalacturonides' mixtures are obtained by enzymatic hydrolysis of pectins of diverse vegetal species. These oligosaccharides unchain a diverse biological activity in plants, which depends mainly on their polymerization degrees. The National Institute of Agricultural Science has a patent technology at national scale that lets to obtain a mixture of oligogalacturonides with different polymerization degree. In this work is presented the characterization of oligogalacturonides by spectrophotometric analysis attending to their uronic acids, reductor sugars, and neutral sugars content. Also the chromatographic profile of samples in study is obtained, using the derivatization with 2-aminobenzamide label and the separation by high pH anion exchange chromatography. It is achieved the separation of at least eight galacturonic acid oligomers with a variable degree of polymerization. On the other hand, the analysis by Fourier transform-infrared spectroscopy (FT-IR) showed that mixtures were composed by galacturonic acid salts. Results indicated that starting from two pectic acids with different characteristics, mixtures of oligogalacturonides of similar chemical composition could be obtained, but they differ in the proportion that they are presented

  3. hydrocarbon mixtures: Phase strength analysis

    Indian Academy of Sciences (India)

    Unknown

    In case of each type of binary mixture, there were five samples with different molar ratio (MR) ... Philips X-ray diffractometer, type PW1710. The operating conditions were: 25 mA current at 40 kV potential; Co- ..... ned only as a dream of the authors. The authors are since- rely thankful to Dr D Banerjee, Director, Defence.

  4. Afrikaner spirituality: A complex mixture

    African Journals Online (AJOL)

    UPuser

    Afrikaner spirituality: A complex mixture. Erna Oliver. Department of Christian Spirituality. Church History and Missiology. University of South Africa. Abstract. The article argues that the perception that Afrikaner spirituality is and has always been founded mainly or only upon the Calvinistic tradition is a misconception.

  5. Toxicity of Flare and Crude Hydrocarbon Mixtures

    Directory of Open Access Journals (Sweden)

    Sonja V. Cook

    2002-01-01

    Full Text Available The toxicity of whole, saturate, and aromatic hydrocarbon mixtures from flare pit and crude oil sources were evaluated using Lumbricus terrestris. Body burden analysis was used to analyze the intrinsic toxicity of the six hydrocarbon mixtures. The major fractions of the whole mixtures, the saturate, and aromatic fractions had different intrinsic toxicities; the aromatics were more toxic than the saturates. The toxicity of the saturate and aromatic fractions also differed between the mixtures. The flare saturate mixture was more toxic than the crude saturate mixture, while the crude aromatic mixture was more toxic than the flare aromatic mixture. The most dramatic difference in toxicity of the two sources was between the flare whole and crude whole mixtures. The crude whole mixture was very toxic; the toxicity of this mixture reflected the toxicity of the crude aromatic fraction. However, the flare whole mixture was not toxic, due to a lack of partitioning from the whole mixture into the lipid membrane of the exposed worms. This lack of partitioning appears to be related to the relatively high concentrations of asphaltenes and polar compounds in the flare pit whole mixture.

  6. Mixtures in nonstable Levy processes

    International Nuclear Information System (INIS)

    Petroni, N Cufaro

    2007-01-01

    We analyse the Levy processes produced by means of two interconnected classes of nonstable, infinitely divisible distribution: the variance gamma and the Student laws. While the variance gamma family is closed under convolution, the Student one is not: this makes its time evolution more complicated. We prove that-at least for one particular type of Student processes suggested by recent empirical results, and for integral times-the distribution of the process is a mixture of other types of Student distributions, randomized by means of a new probability distribution. The mixture is such that along the time the asymptotic behaviour of the probability density functions always coincide with that of the generating Student law. We put forward the conjecture that this can be a general feature of the Student processes. We finally analyse the Ornstein-Uhlenbeck process driven by our Levy noises and show a few simulations of it

  7. On theoretical aspects of mixture problems

    Directory of Open Access Journals (Sweden)

    François Dubeau

    2017-11-01

    Full Text Available Mixture problems are basic but important problems in Operations Research. In this paper we consider variants of the basic linear mixture problem and indicate mathematical links between them.

  8. Properties of asphalt mixtures containing RAP.

    Science.gov (United States)

    2009-12-01

    A typical NHDOT Hot Mix Asphalt (HMA) concrete mixture contains at least 15% Reclaimed Asphalt Pavement (RAP). The increasing cost of virgin asphalt and aggregate has increased the interest in using higher percentages of RAP in HMA mixtures. The purp...

  9. Evaluation of HMA mixtures containing Sasobit.

    Science.gov (United States)

    2009-07-01

    This limited study provided a laboratory and field comparative evaluation of PG 76-22 HMA : hot mix asphalt (HMA) mixture and a mixture containing the additive Sasobit. The : fundamental material characterization testing (asphalt cement binde...

  10. Consistency of the MLE under mixture models

    OpenAIRE

    Chen, Jiahua

    2016-01-01

    The large-sample properties of likelihood-based statistical inference under mixture models have received much attention from statisticians. Although the consistency of the nonparametric MLE is regarded as a standard conclusion, many researchers ignore the precise conditions required on the mixture model. An incorrect claim of consistency can lead to false conclusions even if the mixture model under investigation seems well behaved. Under a finite normal mixture model, for instance, the consis...

  11. Dirichlet Process Parsimonious Mixtures for clustering

    OpenAIRE

    Chamroukhi, Faicel; Bartcus, Marius; Glotin, Hervé

    2015-01-01

    The parsimonious Gaussian mixture models, which exploit an eigenvalue decomposition of the group covariance matrices of the Gaussian mixture, have shown their success in particular in cluster analysis. Their estimation is in general performed by maximum likelihood estimation and has also been considered from a parametric Bayesian prospective. We propose new Dirichlet Process Parsimonious mixtures (DPPM) which represent a Bayesian nonparametric formulation of these parsimonious Gaussian mixtur...

  12. Psychophysical studies of mixtures of tastants

    NARCIS (Netherlands)

    Graaf, de C.

    1988-01-01

    The human perception of mixtures of tastante was studied with reference to three central issues, i.e., 1) the paradigma of equiratio taste substance mixtures. as an instrument to manipulate the physical composition of tastant mixtures. This paradiama also enables the construction of psychophysical

  13. 21 CFR 82.6 - Certifiable mixtures.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Certifiable mixtures. 82.6 Section 82.6 Food and... PROVISIONALLY LISTED COLORS AND SPECIFICATIONS General Provisions § 82.6 Certifiable mixtures. (a) A batch of a mixture which contains no straight color listed in subpart C or D may be certified for use in food, drugs...

  14. Some properties of explosive mixtures containing peroxides

    International Nuclear Information System (INIS)

    Zeman, Svatopluk; Trzcinski, Waldemar A.; Matyas, Robert

    2008-01-01

    This study concerns mixtures of triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP) and ammonium nitrate (AN) with added water (W), as the case may be, and dry mixtures of TATP with urea nitrate (UN). Relative performances (RP) of the mixtures and their individual components, relative to TNT, were determined by means of ballistic mortar. The detonation energies, E 0 , and detonation velocities, D, were calculated for the mixtures studied by means of the thermodynamic code CHEETAH. Relationships have been found and are discussed between the RP and the E 0 values related to unit volume of gaseous products of detonation of these mixtures. These relationships together with those between RP and oxygen balance values of the mixtures studied indicate different types of participation of AN and UN in the explosive decomposition of the respective mixtures. Dry TATP/UN mixtures exhibit lower RP than analogous mixtures TATP/AN containing up to 25% of water. Depending on the water content, the TATP/AN mixtures possess higher detonability values than the ANFO explosives. A semi-logarithmic relationship between the D values and oxygen coefficients has been derived for all the mixtures studied at the charge density of 1000 kg m -3 . Among the mixtures studied, this relationship distinguishes several samples of the type of 'tertiary explosives' as well as samples that approach 'high explosives' in their performances and detonation velocities

  15. Complex mixtures: Hazard identification and risk assessment

    NARCIS (Netherlands)

    Fay, R.M.; Feron, V.J.

    1996-01-01

    Regarding risk evaluation of complex mixtures, the Working Group discussed the following topics: evaluation of the mixture as a whole, fractionation of the mixture, identification of the 'top ten' chemicals, and composite standards. It was concluded that no standard methodology for hazard

  16. Nonparametric Mixture of Regression Models.

    Science.gov (United States)

    Huang, Mian; Li, Runze; Wang, Shaoli

    2013-07-01

    Motivated by an analysis of US house price index data, we propose nonparametric finite mixture of regression models. We study the identifiability issue of the proposed models, and develop an estimation procedure by employing kernel regression. We further systematically study the sampling properties of the proposed estimators, and establish their asymptotic normality. A modified EM algorithm is proposed to carry out the estimation procedure. We show that our algorithm preserves the ascent property of the EM algorithm in an asymptotic sense. Monte Carlo simulations are conducted to examine the finite sample performance of the proposed estimation procedure. An empirical analysis of the US house price index data is illustrated for the proposed methodology.

  17. TRANSPORT PROPERTIES FOR REFRIGERANT MIXTURES

    Directory of Open Access Journals (Sweden)

    V. Geller

    2014-06-01

    Full Text Available A set of models to predict viscosity and thermal conductivity of refrigerant mixtures is developed. A general model for viscosity and thermal conductivity use the three contributions sum form (the dilute-gas terms, the residual terms, and the liquid terms. The corresponding states model is recommended to predict the dense gas transport properties over a range of reduced density from 0 to 2. It is shown that the RHS model provides the most reliable results for the saturated-liquid and the compressed-liquid transport properties over a range of given temperatures from 0,5 to 0,95.

  18. Supercritical Water Mixture (SCWM) Experiment

    Science.gov (United States)

    Hicks, Michael C.; Hegde, Uday G.

    2012-01-01

    The subject presentation, entitled, Supercritical Water Mixture (SCWM) Experiment, was presented at the International Space Station (ISS) Increment 33/34 Science Symposium. This presentation provides an overview of an international collaboration between NASA and CNES to study the behavior of a dilute aqueous solution of Na2SO4 (5% w) at near-critical conditions. The Supercritical Water Mixture (SCWM) investigation, serves as important precursor work for subsequent Supercritical Water Oxidation (SCWO) experiments. The SCWM investigation will be performed in DECLICs High Temperature Insert (HTI) for the purpose of studying critical fluid phenomena at high temperatures and pressures. The HTI includes a completely sealed and integrated test cell (i.e., Sample Cell Unit SCU) that will contain approximately 0.3 ml of the aqueous test solution. During the sequence of tests, scheduled to be performed in FY13, temperatures and pressures will be elevated to critical conditions (i.e., Tc = 374C and Pc = 22 MPa) in order to observe salt precipitation, precipitate agglomeration and precipitate transport in the presence of a temperature gradient without the influences of gravitational forces. This presentation provides an overview of the motivation for this work, a description of the DECLIC HTI hardware, the proposed test sequences, and a brief discussion of the scientific research objectives.

  19. Mixtures Research at NIEHS: An Evolving Program

    Science.gov (United States)

    Rider, Cynthia V; Carlin, Danielle J; DeVito, Micheal J; Thompson, Claudia L; Walker, Nigel J

    2014-01-01

    The National Institute of Environmental Health Sciences (NIEHS) has a rich history in evaluating the toxicity of mixtures. The types of mixtures assessed by the Division of the National Toxicology Program (DNTP) and the extramural community (through the Division of Extramural Research and Training (DERT)) have included a broad range of chemicals and toxicants, with each study having a unique set of questions and design considerations. Some examples of the types of mixtures studied include: groundwater contaminants, pesticides/fertilizers, dioxin-like chemicals (assessing the toxic equivalency approach), drug combinations, air pollution, metals, polycyclic aromatic hydrocarbons, technical mixtures (e.g. pentachlorophenol, flame retardants), and mixed entities (e.g. herbals, asbestos). These endeavors have provided excellent data on the toxicity of specific mixtures and have been informative to the human health risk assessment process in general (e.g. providing data on low dose exposures to environmental chemicals). However, the mixtures research effort at NIEHS, to date, has been driven by test article nominations to the DNTP or by investigator-initiated research through DERT. Recently, the NIEHS has embarked upon an effort to coordinate mixtures research across both intramural and extramural divisions in order to maximize mixtures research results. A path forward for NIEHS mixtures research will be based on feedback from a Request for Information (RFI) designed to gather up-to-date views on the knowledge gaps and roadblocks to evaluating mixtures and performing cumulative risk assessment, and a workshop organized to bring together mixtures experts from risk assessment, exposure science, biology, epidemiology, and statistics. The future of mixtures research at NIEHS will include projects from nominations to DNTP, studies by extramural investigators, and collaborations across government agencies that address high-priority questions in the field of mixtures research

  20. A novel method dependent only on the mixture information (MIM) for evaluating the toxicity of mixture

    International Nuclear Information System (INIS)

    Zhang Jin; Liu Shushen; Liu Hailing; Zhu Xiangwei; Mi Xiaojuan

    2011-01-01

    Compound contamination and toxicity interaction necessitate the development of models that have an insight into the combined toxicity of chemicals. In this paper, a novel and simple model dependent only on the mixture information (MIM), was developed. Firstly, the concentration-response data of seven groups of binary and multi-component (pseudo-binary) mixtures with different mixture ratios to Vibrio qinghaiensis sp.-Q67 were determined using the microplate toxicity analysis. Then, a desirable non-linear function was selected to fit the data. It was found that there are good linear correlations between the location parameter (α) and mixture ratio (p) of a component and between the steepness (β) and p. Based on the correlations, a mixture toxicity model independent of pure component toxicity profiles was built. The model can be used to accurately estimate the toxicities of the seven groups of mixtures, which greatly simplified the predictive procedure of the combined toxicity. - Highlights: → We develop a mixture toxicity model only on the mixture toxicity profiles. → We regard all multi-component mixtures as pseudo-binary mixtures. → The model is built by using a set of uniform design mixtures. → The model is validated by using a set of fixed concentration ratio mixtures. → The model can also predict the toxicity of external mixtures. - A novel method depends only on mixture information but not on pure component toxicity profiles for evaluating the combined toxicity.

  1. Model structure selection in convolutive mixtures

    DEFF Research Database (Denmark)

    Dyrholm, Mads; Makeig, Scott; Hansen, Lars Kai

    2006-01-01

    The CICAAR algorithm (convolutive independent component analysis with an auto-regressive inverse model) allows separation of white (i.i.d) source signals from convolutive mixtures. We introduce a source color model as a simple extension to the CICAAR which allows for a more parsimoneous...... representation in many practical mixtures. The new filter-CICAAR allows Bayesian model selection and can help answer questions like: 'Are we actually dealing with a convolutive mixture?'. We try to answer this question for EEG data....

  2. Some properties of explosive mixtures containing peroxides

    Energy Technology Data Exchange (ETDEWEB)

    Zeman, Svatopluk [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)], E-mail: svatopluk.zeman@upce.cz; Trzcinski, Waldemar A. [Institute of Chemistry, Military University of Technology, PL-00-908 Warsaw 49 (Poland); Matyas, Robert [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)

    2008-06-15

    This study concerns mixtures of triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP) and ammonium nitrate (AN) with added water (W), as the case may be, and dry mixtures of TATP with urea nitrate (UN). Relative performances (RP) of the mixtures and their individual components, relative to TNT, were determined by means of ballistic mortar. The detonation energies, E{sub 0}, and detonation velocities, D, were calculated for the mixtures studied by means of the thermodynamic code CHEETAH. Relationships have been found and are discussed between the RP and the E{sub 0} values related to unit volume of gaseous products of detonation of these mixtures. These relationships together with those between RP and oxygen balance values of the mixtures studied indicate different types of participation of AN and UN in the explosive decomposition of the respective mixtures. Dry TATP/UN mixtures exhibit lower RP than analogous mixtures TATP/AN containing up to 25% of water. Depending on the water content, the TATP/AN mixtures possess higher detonability values than the ANFO explosives. A semi-logarithmic relationship between the D values and oxygen coefficients has been derived for all the mixtures studied at the charge density of 1000 kg m{sup -3}. Among the mixtures studied, this relationship distinguishes several samples of the type of 'tertiary explosives' as well as samples that approach 'high explosives' in their performances and detonation velocities.

  3. Shear viscosity of liquid mixtures Mass dependence

    CERN Document Server

    Kaushal, R

    2002-01-01

    Expressions for zeroth, second, and fourth sum rules of transverse stress autocorrelation function of two component fluid have been derived. These sum rules and Mori's memory function formalism have been used to study shear viscosity of Ar-Kr and isotopic mixtures. It has been found that theoretical result is in good agreement with the computer simulation result for the Ar-Kr mixture. The mass dependence of shear viscosity for different mole fraction shows that deviation from ideal linear model comes even from mass difference in two species of fluid mixture. At higher mass ratio shear viscosity of mixture is not explained by any of the emperical model.

  4. Deciding which chemical mixtures risk assessment methods work best for what mixtures

    International Nuclear Information System (INIS)

    Teuschler, Linda K.

    2007-01-01

    The most commonly used chemical mixtures risk assessment methods involve simple notions of additivity and toxicological similarity. Newer methods are emerging in response to the complexities of chemical mixture exposures and effects. Factors based on both science and policy drive decisions regarding whether to conduct a chemical mixtures risk assessment and, if so, which methods to employ. Scientific considerations are based on positive evidence of joint toxic action, elevated human exposure conditions or the potential for significant impacts on human health. Policy issues include legislative drivers that may mandate action even though adequate toxicity data on a specific mixture may not be available and risk assessment goals that impact the choice of risk assessment method to obtain the amount of health protection desired. This paper discusses three important concepts used to choose among available approaches for conducting a chemical mixtures risk assessment: (1) additive joint toxic action of mixture components; (2) toxicological interactions of mixture components; and (3) chemical composition of complex mixtures. It is proposed that scientific support for basic assumptions used in chemical mixtures risk assessment should be developed by expert panels, risk assessment methods experts, and laboratory toxicologists. This is imperative to further develop and refine quantitative methods and provide guidance on their appropriate applications. Risk assessors need scientific support for chemical mixtures risk assessment methods in the form of toxicological data on joint toxic action for high priority mixtures, statistical methods for analyzing dose-response for mixtures, and toxicological and statistical criteria for determining sufficient similarity of complex mixtures

  5. Simulation of mixture microstructures via particle packing models and their direct comparison with real mixtures

    Science.gov (United States)

    Gulliver, Eric A.

    The objective of this thesis to identify and develop techniques providing direct comparison between simulated and real packed particle mixture microstructures containing submicron-sized particles. This entailed devising techniques for simulating powder mixtures, producing real mixtures with known powder characteristics, sectioning real mixtures, interrogating mixture cross-sections, evaluating and quantifying the mixture interrogation process and for comparing interrogation results between mixtures. A drop and roll-type particle-packing model was used to generate simulations of random mixtures. The simulated mixtures were then evaluated to establish that they were not segregated and free from gross defects. A powder processing protocol was established to provide real mixtures for direct comparison and for use in evaluating the simulation. The powder processing protocol was designed to minimize differences between measured particle size distributions and the particle size distributions in the mixture. A sectioning technique was developed that was capable of producing distortion free cross-sections of fine scale particulate mixtures. Tessellation analysis was used to interrogate mixture cross sections and statistical quality control charts were used to evaluate different types of tessellation analysis and to establish the importance of differences between simulated and real mixtures. The particle-packing program generated crescent shaped pores below large particles but realistic looking mixture microstructures otherwise. Focused ion beam milling was the only technique capable of sectioning particle compacts in a manner suitable for stereological analysis. Johnson-Mehl and Voronoi tessellation of the same cross-sections produced tessellation tiles with different the-area populations. Control charts analysis showed Johnson-Mehl tessellation measurements are superior to Voronoi tessellation measurements for detecting variations in mixture microstructure, such as altered

  6. Thermodynamics of mixtures containing amines

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Juan Antonio [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain)], E-mail: jagl@termo.uva.es; Mozo, Ismael; Garcia de la Fuente, Isaias; Cobos, Jose Carlos [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain); Riesco, Nicolas [Department of Chemical Engineering, Loughborough University, Loughborough, LE113TU Leicestershire (United Kingdom)

    2008-01-30

    Mixtures with dimethyl or trimethylpyridines and alkane, aromatic compound or 1-alkanol have been examined using different theories: DISQUAC, Flory, the concentration-concentration structure factor, S{sub CC}(0), or the Kirkwood-Buff formalism. DISQUAC represents fairly well the available experimental data, and improves theoretical calculations from Dortmund UNIFAC. Two important effects have been investigated: (i) the effect of increasing the number of methyl groups attached to the aromatic ring of the amine; (ii) the effect of modifying the position of the methyl groups in this ring. The molar excess enthalpy, H{sup E}, and the molar excess volume, V{sup E}, decrease in systems with alkane or methanol as follows: pyridine > 3-methylpyridine > 3,5-dimethylpyridine and pyridine > 2-methylpyridine > 2,4-dimethylpyridine > 2,4,6-trimethylpyridine, which has been attributed to a weakening of the amine-amine interactions in the same sequences. This is in agreement with the relative variation of the effective dipole moment, {mu}-bar, and of the differences between the boiling temperature of a pyridine base and that of the homomorphic alkane. For heptane solutions, the observed H{sup E} variation, H{sup E} (3,5-dimethylpyridine) > H{sup E} (2,4-dimethylpyridine) > H{sup E} (2,6-dimethylpyridine), is explained similarly. Calculations on the basis of the Flory model confirm that orientational effects become weaker in systems with alkane in the order: pyridine > methylpyridine > dimethylpyridine > trimethylpyridine. S{sub CC}(0) calculations show that steric effects increase with the number of CH{sub 3}- groups in the pyridine base, and that the steric effects exerted by methyl groups in positions 2 and 6 are higher than when they are placed in positions 3 and 5. The hydrogen bond energy in methanol mixtures is independent of the pyridine base, and it is estimated to be -35.2 kJ mol{sup -1}. Heterocoordination in these solutions is due in part to size effects. Their

  7. Optimizing laboratory mixture design as it relates to field compaction to improve asphalt mixture durability.

    Science.gov (United States)

    2015-11-01

    Most departments of transportation, including Indiana, currently use the Superpave mixture design method to design asphalt mixtures. : This method specifies that the optimum asphalt content for a given gradation be selected at 4 percent air voids. Du...

  8. STAR-POLYMER -- COLLOID MIXTURES

    Directory of Open Access Journals (Sweden)

    J.Dzubiella

    2002-01-01

    Full Text Available Recent results in theory and simulation of star-polymer--colloid mixtures are reviewed. We present the effective interaction between hard, colloidal particles and star polymers in a good solvent derived by monomer-resolved Molecular Dynamics simulations and theoretical arguments. The relevant parameters are the size ratio q between the stars and the colloids, as well as the number of polymeric arms f (functionality attached to the common center of the star. By covering a wide range of q's ranging from zero (star against a flat wall up to about 0.5, we establish analytical forms for the star-colloid interaction which are in excellent agreement with simulation results. By employing this cross interaction and the effective interactions between stars and colloids themselves, a demixing transition in the fluid phase is observed and systematically investigated for different arm numbers and size ratios. The demixing binodals are compared with experimental observations and found to be consistent. Furthermore, we map the full two-component system on an effective one-component description for the colloids, by inverting the two-component Ornstein-Zernike equations. Some recent results for the depletion interaction and freezing transitions are shown.

  9. Fibril assembly in whey protein mixtures

    NARCIS (Netherlands)

    Bolder, S.G.

    2007-01-01

    The objective of this thesis was to study fibril assembly in mixtures of whey proteins. The effect of the composition of the protein mixture on the structures and the resulting phase behaviour was investigated. The current work has shown that beta-lactoglobulin is responsible for the fibril assembly

  10. Robust classification using mixtures of dependency networks

    DEFF Research Database (Denmark)

    Gámez, José A.; Mateo, Juan L.; Nielsen, Thomas Dyhre

    2008-01-01

    -ups are often obtained at the expense of accuracy. In this paper we try to address this issue through the use of mixtures of dependency networks. To reduce learning time and improve robustness when dealing with data sparse classes, we outline methods for reusing calculations across mixture components. Finally...

  11. Mixture Modeling: Applications in Educational Psychology

    Science.gov (United States)

    Harring, Jeffrey R.; Hodis, Flaviu A.

    2016-01-01

    Model-based clustering methods, commonly referred to as finite mixture modeling, have been applied to a wide variety of cross-sectional and longitudinal data to account for heterogeneity in population characteristics. In this article, we elucidate 2 such approaches: growth mixture modeling and latent profile analysis. Both techniques are…

  12. Separation of organic azeotropic mixtures by pervaporation

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.W.

    1991-12-01

    Distillation is a commonly used separation technique in the petroleum refining and chemical processing industries. However, there are a number of potential separations involving azetropic and close-boiling organic mixtures that cannot be separated efficiently by distillation. Pervaporation is a membrane-based process that uses selective permeation through membranes to separate liquid mixtures. Because the separation process is not affected by the relative volatility of the mixture components being separated, pervaporation can be used to separate azetropes and close-boiling mixtures. Our results showed that pervaporation membranes can be used to separate azeotropic mixtures efficiently, a result that is not achievable with simple distillation. The membranes were 5--10 times more permeable to one of the components of the mixture, concentrating it in the permeate stream. For example, the membrane was 10 times more permeable to ethanol than methyl ethyl ketone, producing 60% ethanol permeate from an azeotropic mixture of ethanol and methyl ethyl ketone containing 18% ethanol. For the ethyl acetate/water mixture, the membranes showed a very high selectivity to water (> 300) and the permeate was 50--100 times enriched in water relative to the feed. The membranes had permeate fluxes on the order of 0.1--1 kg/m{sup 2}{center dot}h in the operating range of 55--70{degrees}C. Higher fluxes were obtained by increasing the operating temperature.

  13. Buffer gas cooling and mixture analysis

    Science.gov (United States)

    Patterson, David S.; Doyle, John M.

    2018-03-06

    An apparatus for spectroscopy of a gas mixture is described. Such an apparatus includes a gas mixing system configured to mix a hot analyte gas that includes at least one analyte species in a gas phase into a cold buffer gas, thereby forming a supersaturated mixture to be provided for spectroscopic analysis.

  14. Two-microphone Separation of Speech Mixtures

    DEFF Research Database (Denmark)

    2006-01-01

    Matlab source code for underdetermined separation of instaneous speech mixtures. The algorithm is described in [1] Michael Syskind Pedersen, DeLiang Wang, Jan Larsen and Ulrik Kjems: ''Two-microphone Separation of Speech Mixtures,'' 2006, submitted for journal publoication. See also, [2] Michael...

  15. The Modified Enskog Equation for Mixtures

    NARCIS (Netherlands)

    Beijeren, H. van; Ernst, M.H.

    1973-01-01

    In a previous paper it was shown that a modified form of the Enskog equation, applied to mixtures of hard spheres, should be considered as the correct extension of the usual Enskog equation to the case of mixtures. The main argument was that the modified Enskog equation leads to linear transport

  16. Spectrometric mixture analysis: An unexpected wrinkle

    Indian Academy of Sciences (India)

    Administrator

    Dedicated to the memory of the late Professor S K Rangarajan. Spectrometric mixture analysis: An unexpected wrinkle. †. ROBERT DE LEVIE. Chemistry Department ..... For a quick visual check of the mixture spectra, we plotted the absorbances of those solutions that have a constant value of c + t, such as (0, 180), (90,.

  17. Separation of gas mixtures by centrifugation

    Science.gov (United States)

    Park, C.; Love, W. L.

    1972-01-01

    Magnetohydrodynamic (MHD) centrifuge utilizing electric currents and magnetic fields produces a magnetic force which develops supersonic rotational velocities in gas mixtures. Device is superior to ordinary centrifuges because rotation of gas mixture is produced by MHD force rather than mechanical means.

  18. Intelligent gas-mixture flow sensor

    NARCIS (Netherlands)

    Lammerink, Theodorus S.J.; Dijkstra, Fred; Houkes, Z.; van Kuijk, J.C.C.; van Kuijk, Joost

    A simple way to realize a gas-mixture flow sensor is presented. The sensor is capable of measuring two parameters from a gas flow. Both the flow rate and the helium content of a helium-nitrogen gas mixture are measured. The sensor exploits two measurement principles in combination with (local)

  19. Supercritical separation process for complex organic mixtures

    Science.gov (United States)

    Chum, H.L.; Filardo, G.

    1990-10-23

    A process is disclosed for separating low molecular weight components from complex aqueous organic mixtures. The process includes preparing a separation solution of supercritical carbon dioxide with an effective amount of an entrainer to modify the solvation power of the supercritical carbon dioxide and extract preselected low molecular weight components. The separation solution is maintained at a temperature of at least about 70 C and a pressure of at least about 1,500 psi. The separation solution is then contacted with the organic mixtures while maintaining the temperature and pressure as above until the mixtures and solution reach equilibrium to extract the preselected low molecular weight components from the organic mixtures. Finally, the entrainer/extracted components portion of the equilibrium mixture is isolated from the separation solution. 1 fig.

  20. Deformation Properties and Fatigue of Bituminous Mixtures

    Directory of Open Access Journals (Sweden)

    Frantisek Schlosser

    2013-01-01

    Full Text Available Deformation properties and fatigue performance are important characteristics of asphalt bound materials which are used for construction of pavement layers. Viscoelastic asphalt mixtures are better characterized via dynamic tests. This type of tests allows us to collate materials with regard to axle vibrations which lie usually in the range of 6 Hz–25 Hz for standard conditions. Asphalt modified for heat sensitivity in the range from −20°C to +60°C has significant impact on the overall characteristics of the mixture. Deformation properties are used as inputs for empirical mixture design, and fatigue performance of asphalt mixtures reflects the parameters of functional tests. Master curves convey properties of asphalt mixtures for various conditions and allow us to evaluate them without the need of time expensive testing.

  1. Radiolytic decomposition of water-ethanol mixtures

    International Nuclear Information System (INIS)

    Baquey, Charles

    1968-07-01

    This research thesis addresses the study of the behaviour of binary mixtures submitted to ionizing radiations, and notably aims, by studying the case of water-ethanol mixtures, at verifying solutions proposed by previously published works on the origin of hydrogen atoms and of molecular hydrogen, on the intervention of excited atoms, and on the origin of products appearing under radiolysis. The experimental part of this work consists in the dosing of products formed in water-ethanol mixtures irradiated in presence or absence of nitrate, hydrogen, hydrocarbon, acetaldehyde, 2-3 butanediol and nitrite. Results are discussed and interpreted in terms of acetaldehyde efficiency, 2-3 butanediol efficiencies, and hydrocarbon efficiencies in pure ethanol, and in water-ethanol mixtures. The influence of the presence of nitrate ions in mixtures is also discussed

  2. Coking technology using packed coal mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Kuznichenko, V.M.; Shteinberg, Eh.A.; Tolstoi, A.P. (Khar' kovskii Nauchno-Issledovatel' skii Uglekhimicheskii Institut, Kharkov (Ukrainian SSR))

    1991-08-01

    Discusses coking of packed coal charges in the FRG, USSR, France, India, Poland and Czechoslovakia. The following aspects are evaluated: types of weakly caking coals that are used as components of packed mixtures, energy consumption of packing, effects of coal mixture packing on coke oven design, number of coke ovens in a battery, heating temperature, coking time, coke properties, investment and operating cost. Statistical data that characterize the Saarberg packing process used in the FRG are analyzed. Packing coal mixtures for coking improves coke quality and reduces environmental pollution. 4 refs.

  3. APPARATUS FOR HANDLING MIXTURES OF SOLID MATERIALS

    Science.gov (United States)

    Hubbell, J.P.

    1959-08-25

    An apparatus is described for handling either a mixture of finely subdivided materials or a single material requiring a compacting action thereon preparatory to a chemical reducing process carried out in a crucible container. The apparatus is designed to deposit a mixture of dust-forming solid materials in a container while confining the materials against escape into the surrounding atmosphere. A movable filling tube, having a compacting member, is connected to the container and to a covered hopper receiving the mixture of materials. The filling tube is capable of reciprocating in the container and their relative positions are dependent upon the pressure established upon the material by the compacting member.

  4. Probabilistic mixture-based image modelling

    Czech Academy of Sciences Publication Activity Database

    Haindl, Michal; Havlíček, Vojtěch; Grim, Jiří

    2011-01-01

    Roč. 47, č. 3 (2011), s. 482-500 ISSN 0023-5954 R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593 Grant - others:CESNET(CZ) 387/2010; GA MŠk(CZ) 2C06019; GA ČR(CZ) GA103/11/0335 Institutional research plan: CEZ:AV0Z10750506 Keywords : BTF texture modelling * discrete distribution mixtures * Bernoulli mixture * Gaussian mixture * multi-spectral texture modelling Subject RIV: BD - Theory of Information Impact factor: 0.454, year: 2011 http://library.utia.cas.cz/separaty/2011/RO/haindl-0360244.pdf

  5. Principles and practice of mixtures toxicology

    National Research Council Canada - National Science Library

    Mumtaz, Moiz

    2010-01-01

    ... accurate predictions for the adverse effects of mixtures has been limited by the difficulty of acquiring data for all the possible combinations of dose and time that exist even in simple mixtures. Such predictions are also compromised by our use of single-agent toxicity studies since most "realworld" exposures are to mixtures. This has resulted in a variety of approaches (models, protocols, techniques, etc.) to address these issues. These are described in detail in the two dozen chapters of this book along with ca...

  6. Adsorption on mixtures of ion exchangers

    International Nuclear Information System (INIS)

    Triolo, R.; Lietzke, M.H.

    1979-01-01

    A theoretical study has been made of adsorption on mixtures of ion exchangers. The effect of variables such as the concentration of the ion being adsorbed, the concentration of the supporting electrolyte, loading, the values of the capacities and equilibrium constants for the various exchange processes, and the fraction of each adsorber in the mixture on the observed distribution coefficient has been investigated. A computer program has been written to facilitate the calculation of distribution coefficients for the adsorption of an ion on a given mixture of ion exchangers under a specified set of conditions

  7. Quantitative characterization of microstructure of asphalt mixtures

    Science.gov (United States)

    2010-10-01

    The microstructure of the fine aggregate matrix has a significant influence on the : mechanical properties and evolution of damage in an asphalt mixture. However, very little : work has been done to define and quantitatively characterize the microstr...

  8. Structural design parameters of current WSDOT mixtures.

    Science.gov (United States)

    2013-06-01

    The AASHTO LRFD, as well as other design manuals, has specifications that estimate the structural performance of a concrete mixture with regard to compressive strength, tensile strength, and deformation-related properties such as the modulus of elast...

  9. Model structure selection in convolutive mixtures

    DEFF Research Database (Denmark)

    Dyrholm, Mads; Makeig, S.; Hansen, Lars Kai

    2006-01-01

    The CICAAR algorithm (convolutive independent component analysis with an auto-regressive inverse model) allows separation of white (i.i.d) source signals from convolutive mixtures. We introduce a source color model as a simple extension to the CICAAR which allows for a more parsimonious represent......The CICAAR algorithm (convolutive independent component analysis with an auto-regressive inverse model) allows separation of white (i.i.d) source signals from convolutive mixtures. We introduce a source color model as a simple extension to the CICAAR which allows for a more parsimonious...... representation in many practical mixtures. The new filter-CICAAR allows Bayesian model selection and can help answer questions like: ’Are we actually dealing with a convolutive mixture?’. We try to answer this question for EEG data....

  10. Modelling of an homogeneous equilibrium mixture model

    International Nuclear Information System (INIS)

    Bernard-Champmartin, A.; Poujade, O.; Mathiaud, J.; Mathiaud, J.; Ghidaglia, J.M.

    2014-01-01

    We present here a model for two phase flows which is simpler than the 6-equations models (with two densities, two velocities, two temperatures) but more accurate than the standard mixture models with 4 equations (with two densities, one velocity and one temperature). We are interested in the case when the two-phases have been interacting long enough for the drag force to be small but still not negligible. The so-called Homogeneous Equilibrium Mixture Model (HEM) that we present is dealing with both mixture and relative quantities, allowing in particular to follow both a mixture velocity and a relative velocity. This relative velocity is not tracked by a conservation law but by a closure law (drift relation), whose expression is related to the drag force terms of the two-phase flow. After the derivation of the model, a stability analysis and numerical experiments are presented. (authors)

  11. Adaptive estimation of Raman chemical mixture spectra

    Science.gov (United States)

    Burr, David J.; Chen, Carl G.; Sedlacek, Arthur J., III

    1996-11-01

    We introduce an adaptive mixing algorithm for estimating the relative ratios of chemicals in a mixture spectrum. This procedure is particularly well suited to mixtures with a large dynamic range of mixture weights. It has the advantage of being able to be used in conjunction with a band-pass (difference-to-Gaussian or DOG) filter, and a correction of baseline off-set and tilting of the spectrum. Output of these filtering techniques is a cleaner signal retaining most of the relevant Raman spectral signature while minimizing artifacts due primarily to Rayleigh, dust, and atmospheric aerosols. We will describe the results of applying these algorithm to mixture spectra with both real and simulated additive noise.

  12. Quantiles for Finite Mixtures of Normal Distributions

    Science.gov (United States)

    Rahman, Mezbahur; Rahman, Rumanur; Pearson, Larry M.

    2006-01-01

    Quantiles for finite mixtures of normal distributions are computed. The difference between a linear combination of independent normal random variables and a linear combination of independent normal densities is emphasized. (Contains 3 tables and 1 figure.)

  13. Mixture design procedure for flexible base.

    Science.gov (United States)

    2013-04-01

    This document provides information on mixture design requirements for a flexible base course. Sections : design requirements, job mix formula, contractor's responsibility, and engineer's responsibility. Tables : material requirements; requirements fo...

  14. Composition of nonflowing impregnating cable mixture

    Energy Technology Data Exchange (ETDEWEB)

    Dimitrov, D.M.; Andreyev, V.G.; Koralski, G.I.; Petkova, N.; Velikova, D.G.

    1979-08-10

    A composition of a nonflowing electrical insulation cable mixture is patented which is based on petroleum oil, colophony, polyolefinic wax, polyethylene and ceresine containing 1-20 percent per mixture of butadiene-styrol latex. Example (parts by weight). Cable impregnating oil has the following composition: colophony 5, petroleum oil 7.7, butadiene-styrol latex 5.0, polyolefin wax 10, low pressure polyethylene 3. In order to obtain a mixture latex is added to petroleum oil heated to 80 degrees, the mixture is heated to 110 degrees, and then to 130 degrees and the other components are added as it is vigorously mixed. The oil obtained features the following properties: drop point 110 degrees, penetration at 25 degrees 142, specific volumetric resistance at 80 degrees 1.485 x 10 13, angle of dielectric losses 0.0049, dielectric strength at 20 degrees 240 kW/cm.

  15. Predicting skin permeability from complex chemical mixtures.

    Science.gov (United States)

    Riviere, Jim E; Brooks, James D

    2005-10-15

    Occupational and environmental exposure to topical chemicals is usually in the form of complex chemical mixtures, yet risk assessment is based on experimentally derived data from individual chemical exposures from a single, usually aqueous vehicle, or from computed physiochemical properties. We present an approach using hybrid quantitative structure permeation relationships (QSPeR) models where absorption through porcine skin flow-through diffusion cells is well predicted using a QSPeR model describing the individual penetrants, coupled with a mixture factor (MF) that accounts for physicochemical properties of the vehicle/mixture components. The baseline equation is log k(p) = c + mMF + a sigma alpha2(H) + b sigma beta2(H) + s pi2(H) + rR2 + vV(x) where sigma alpha2(H) is the hydrogen-bond donor acidity, sigma beta2(H) is the hydrogen-bond acceptor basicity, pi2(H) is the dipolarity/polarizability, R2 represents the excess molar refractivity, and V(x) is the McGowan volume of the penetrants of interest; c, m, a, b, s, r, and v are strength coefficients coupling these descriptors to skin permeability (k(p)) of 12 penetrants (atrazine, chlorpyrifos, ethylparathion, fenthion, methylparathion, nonylphenol, rho-nitrophenol, pentachlorophenol, phenol, propazine, simazine, and triazine) in 24 mixtures. Mixtures consisted of full factorial combinations of vehicles (water, ethanol, propylene glycol) and additives (sodium lauryl sulfate, methyl nicotinate). An additional set of 4 penetrants (DEET, SDS, permethrin, ricinoleic acid) in different mixtures were included to assess applicability of this approach. This resulted in a dataset of 16 compounds administered in 344 treatment combinations. Across all exposures with no MF, R2 for absorption was 0.62. With the MF, correlations increased up to 0.78. Parameters correlated to the MF include refractive index, polarizability and log (1/Henry's Law Constant) of the mixture components. These factors should not be considered final

  16. Flash evaporation of liquid monomer particle mixture

    Science.gov (United States)

    Affinito, John D.; Darab, John G.; Gross, Mark E.

    1999-01-01

    The present invention is a method of making a first solid composite polymer layer. The method has the steps of (a) mixing a liquid monomer with particles substantially insoluble in the liquid monomer forming a monomer particle mixture; (b) flash evaporating the particle mixture and forming a composite vapor; and (c) continuously cryocondensing said composite vapor on a cool substrate and cross-linking the cryocondensed film thereby forming the polymer layer.

  17. Isotope mixtures of hydrogen in vanadium

    International Nuclear Information System (INIS)

    Mecking-Schloetensack, P.

    1982-03-01

    The properties of isotope-mixtures of Protium and Deuterium stored in Vanadium have been studied. Protium and Deuterium are existing as interstitial-atoms on tetrahedral sites as well as on octahedral sites in this system. This feature leads to large isotopic-effects between the two isotopes. The dependence of the thermodynamic functions like heat of solution, nonconfigurational entropy, specific heat and ordering temperatures from the composition of the isotope-mixture has been determined. (orig.)

  18. Using Big Data Analytics to Address Mixtures Exposure

    Science.gov (United States)

    The assessment of chemical mixtures is a complex issue for regulators and health scientists. We propose that assessing chemical co-occurrence patterns and prevalence rates is a relatively simple yet powerful approach in characterizing environmental mixtures and mixtures exposure...

  19. Exact Fit of Simple Finite Mixture Models

    Directory of Open Access Journals (Sweden)

    Dirk Tasche

    2014-11-01

    Full Text Available How to forecast next year’s portfolio-wide credit default rate based on last year’s default observations and the current score distribution? A classical approach to this problem consists of fitting a mixture of the conditional score distributions observed last year to the current score distribution. This is a special (simple case of a finite mixture model where the mixture components are fixed and only the weights of the components are estimated. The optimum weights provide a forecast of next year’s portfolio-wide default rate. We point out that the maximum-likelihood (ML approach to fitting the mixture distribution not only gives an optimum but even an exact fit if we allow the mixture components to vary but keep their density ratio fixed. From this observation we can conclude that the standard default rate forecast based on last year’s conditional default rates will always be located between last year’s portfolio-wide default rate and the ML forecast for next year. As an application example, cost quantification is then discussed. We also discuss how the mixture model based estimation methods can be used to forecast total loss. This involves the reinterpretation of an individual classification problem as a collective quantification problem.

  20. Microsiemens or Milligrams: Measures of Ionic Mixtures ...

    Science.gov (United States)

    In December of 2016, EPA released the Draft Field-Based Methods for Developing Aquatic Life Criteria for Specific Conductivity for public comment. Once final, states and authorized tribes may use these methods to derive field-based ecoregional ambient Aquatic Life Ambient Water Quality Criteria (AWQC) for specific conductivity (SC) in flowing waters. The methods provide flexible approaches for developing science-based SC criteria that reflect ecoregional or state specific factors. The concentration of a dissolved salt mixture can be measured in a number of ways including measurement of total dissolved solids, freezing point depression, refractive index, density, or the sum of the concentrations of individually measured ions. For the draft method, SC was selected as the measure because SC is a measure of all ions in the mixture; the measurement technology is fast, inexpensive, and accurate, and it measures only dissolved ions. When developing water quality criteria for major ions, some stakeholders may prefer to identify the ionic constituents as a measure of exposure instead of SC. A field-based method was used to derive example chronic and acute water quality criteria for SC and two anions a common mixture of ions (bicarbonate plus sulfate, [HCO3−] + [SO42−] in mg/L) that represent common mixtures in streams. These two anions are sufficient to model the ion mixture and SC (R2 = 0.94). Using [HCO3−] + [SO42−] does not imply that these two anions are the

  1. Coal-water mixture fuel burner

    Science.gov (United States)

    Brown, T.D.; Reehl, D.P.; Walbert, G.F.

    1985-04-29

    The present invention represents an improvement over the prior art by providing a rotating cup burner arrangement for use with a coal-water mixture fuel which applies a thin, uniform sheet of fuel onto the inner surface of the rotating cup, inhibits the collection of unburned fuel on the inner surface of the cup, reduces the slurry to a collection of fine particles upon discharge from the rotating cup, and further atomizes the fuel as it enters the combustion chamber by subjecting it to the high shear force of a high velocity air flow. Accordingly, it is an object of the present invention to provide for improved combustion of a coal-water mixture fuel. It is another object of the present invention to provide an arrangement for introducing a coal-water mixture fuel into a combustion chamber in a manner which provides improved flame control and stability, more efficient combustion of the hydrocarbon fuel, and continuous, reliable burner operation. Yet another object of the present invention is to provide for the continuous, sustained combustion of a coal-water mixture fuel without the need for a secondary combustion source such as natural gas or a liquid hydrocarbon fuel. Still another object of the present invention is to provide a burner arrangement capable of accommodating a coal-water mixture fuel having a wide range of rheological and combustion characteristics in providing for its efficient combustion. 7 figs.

  2. A constitutive theory of reacting electrolyte mixtures

    Science.gov (United States)

    Costa Reis, Martina; Wang, Yongqi; Bono Maurizio Sacchi Bassi, Adalberto

    2013-11-01

    A constitutive theory of reacting electrolyte mixtures is formulated. The intermolecular interactions among the constituents of the mixture are accounted for through additional freedom degrees to each constituent of the mixture. Balance equations for polar reacting continuum mixtures are accordingly formulated and a proper set of constitutive equations is derived with basis in the Müller-Liu formulation of the second law of thermodynamics. Moreover, the non-equilibrium and equilibrium responses of the reacting mixture are investigated in detail by emphasizing the inner and reactive structures of the medium. From the balance laws and constitutive relations, the effects of molecular structure of constituents upon the fluid flow are studied. It is also demonstrated that the local thermodynamic equilibrium state can be reached without imposing that the set of independent constitutive variables is time independent, neither spatially homogeneous nor null. The resulting constitutive relations presented throughout this work are of relevance to many practical applications, such as swelling of clays, developing of bio and polymeric membranes, and use of electrorheological fluids in industrial processes. The first author acknowledges financial support from National Counsel of Technological and Scientific Development (CNPq) and German Academic Exchange Service (DAAD).

  3. Pattern formation in phase separating binary mixtures.

    Science.gov (United States)

    Sam, Ebie M; Hayase, Yumino; Auernhammer, Günter K; Vollmer, Doris

    2011-08-07

    We experimentally investigate the interplay of thermodynamics with hydrodynamics during phase separation of (quasi-) binary mixtures. Well defined patterns emerge while slowly crossing the cloud point curve. Depending on the material parameters of the experimental system, two distinct scenarios are observed. In quasi-binary mixtures of methanol-hexane patterns appear before macroscopic phase separation sets in. In course of time the patterns turn faint while the overall turbidity of the sample increases until the mixtures become completely turbid. We attribute this pattern formation to a latent heat induced instability resembling a Rayleigh-Bénard instability. This is confirmed by calorimetric data and an estimate of its Rayleigh number. Mixtures of C(4)E(1)-water doped with decane phase separate under heating. After passing the cloud point curve these mixtures first become homogenously turbid. While clearing up, pattern formation is observed. We attribute this type of pattern formation to an interfacial tension induced Bénard-Marangoni instability. The occurrence of the two scenarios is supported by the relevant dimensionless numbers. This journal is © the Owner Societies 2011

  4. GLIMMIX : Software for estimating mixtures and mixtures of generalized linear models

    NARCIS (Netherlands)

    Wedel, M

    2001-01-01

    GLIMMIX is a commercial WINDOWS-based computer program that implements the EM algorithm (Dempster, Laird and Rubin 1977) for the estimation of finite mixtures and mixtures of generalized linear models. The program allows for the specification of a number of distributions in the exponential family,

  5. Chemical Mixtures Health Risk Assessment: Overview of Exposure Assessment, Whole Mixtures Assessments; Basic Concepts

    Science.gov (United States)

    This problems-based, half-day, introductory workshop focuses on methods to assess health risks posed by exposures to chemical mixtures in the environment. Chemical mixtures health risk assessment methods continue to be developed and evolve to address concerns over health risks f...

  6. The Viscosity of Organic Liquid Mixtures

    Science.gov (United States)

    Len, C. W.; Trusler, J. P. M.; Vesovic, V.; Wakeham, W. A.

    2006-01-01

    The paper reports measurements of the viscosity and density of two heavy hydrocarbon mixtures, Dutrex and Arab Light Flashed Distillate (ALFD), and of their mixtures with hydrogen. The measurements have been carried out with a vibrating-wire device over a range of temperatures from 399 to 547 K and at pressures up to 20 MPa. Measurements have also been carried out on systems in which hydrogen at different concentrations has been dissolved in the liquids. The measurements have an estimated uncertainty of ±5% for viscosity and ±2% for density and represent the first results on these prototypical heavy hydrocarbons. The results reveal that the addition of hydrogen reduces both the density and viscosity of the original hydrocarbon mixture at a particular temperature and pressure.

  7. MICROBIAL QUALITY OF HONEY MIXTURE WITH POLLEN

    Directory of Open Access Journals (Sweden)

    Ján Mareček

    2011-02-01

    Full Text Available Normal 0 21 MicrosoftInternetExplorer4 The aim of this study was evaluation of microbial quality in raw materials (honey, pollen and evaluation of microbial quality in honey mixture with pollen (2.91 % and 3.85 % and also dynamics of microbial groups in honey mixtures with pollen after 14 days storage at the room temperature (approximately 25 °C and in cold store (8 °C. We used dilution plating method for testing of samples. Detections of total plate microbial count (aerobic and anaerobic microorganisms, sporulating bacteria, coliform bacteria, Bifidobacterium sp., Lactobacillus sp. and microscopic fungi were performed. In general, counts of microorganisms decreased in honey mixture with pollen compared to raw pollen and these counts increased compared to natural honey. Total plate count was 5.37 log KTJ.g-1 in pollen; 1.36 log KTJ.g-1 in honey; 2.97 log KTJ.g-1 in honey mixture with 2.91 % pollen and 2.04 log KTJ.g-1 in honey mixture with 3.85 % pollen. Coliform bacteria were detected in pollen (1.77 log KTJ.g-1. Then, we found coliform bacteria in one sample of honey mixtures with pollen (2.91 % - 1.00 log KTJ.g-1.Bifidobacterium species were detected only in raw pollen. We did not findLactobacillus sp. in any of the samples. Microscopic fungi were detected on two cultivating media. Yeasts were present in pollen sample (average 5.39 log KTJ.g-1, honey mixture with 2.91 % pollen (average 2.51 log KTJ.g-1 and honey mixture with 3.85 % pollen (average 1.58 log KTJ.g-1. Filamentous microscopic fungi were detectable in pollen (average 3.38 log KTJ.g-1, in honey (only on one medium: 1.00 log KTJ.g-1, in honey mixture with 2.91 % pollen (average 1.15 log KTJ.g-1 and in honey mixture with 3.85 % pollen (1.71 %. Raw pollen contained microscopic fungi as Absidiasp., Mucor sp., Alternaria sp. andEmericella nidulans. Honey mixture with 2.91 % pollen after storage (14 days contained lower microbial counts when compared with the sample

  8. Two-Microphone Separation of Speech Mixtures

    DEFF Research Database (Denmark)

    Pedersen, Michael Syskind; Wang, DeLiang; Larsen, Jan

    2008-01-01

    Separation of speech mixtures, often referred to as the cocktail party problem, has been studied for decades. In many source separation tasks, the separation method is limited by the assumption of at least as many sensors as sources. Further, many methods require that the number of signals within...... combined, independent component analysis (ICA) and binary time–frequency (T–F) masking. By estimating binary masks from the outputs of an ICA algorithm, it is possible in an iterative way to extract basis speech signals from a convolutive mixture. The basis signals are afterwards improved by grouping...... similar signals. Using two microphones, we can separate, in principle, an arbitrary number of mixed speech signals. We show separation results for mixtures with as many as seven speech signals under instantaneous conditions. We also show that the proposed method is applicable to segregate speech signals...

  9. Detonation velocity in poorly mixed gas mixtures

    Science.gov (United States)

    Prokhorov, E. S.

    2017-10-01

    The technique for computation of the average velocity of plane detonation wave front in poorly mixed mixture of gaseous hydrocarbon fuel and oxygen is proposed. Here it is assumed that along the direction of detonation propagation the chemical composition of the mixture has periodic fluctuations caused, for example, by layered stratification of gas charge. The technique is based on the analysis of functional dependence of ideal (Chapman-Jouget) detonation velocity on mole fraction (with respect to molar concentration) of the fuel. It is shown that the average velocity of detonation can be significantly (by more than 10%) less than the velocity of ideal detonation. The dependence that permits to estimate the degree of mixing of gas mixture basing on the measurements of average detonation velocity is established.

  10. PREPARATION OF CONDUCTING SOLID MIXTURES, Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Spokas, J. J.

    1978-07-31

    The application of conducting plastic mixtures to the fundamental problem of radiation Dosimetry is briefly reviewed. A particular approach to achieveing formulations with the necessary characteristics is decribed. A number of successful mixtures are defined for a number of different specific dosimetry situations. To obtain high quality stable materials requires intense blending·and working of the materials at elevated temperatures. One machine that succeeds in this task is the Shonka plastics mixer-extruder. The Shonka mixer is described in complete detail. The procedures used in preparing represeptative formulations with this device are presented. A number of properties of successful conducting mixtures so prepared are summarized. The conditions required for molding such material are given. Several special welding methods for specific application with these formulations have been devised and are described.

  11. Joint Bayesian analysis of forensic mixtures.

    Science.gov (United States)

    Pascali, Vince L; Merigioli, Sara

    2012-12-01

    Evaluation of series of PCR experiments referring to the same evidence is not infrequent in a forensic casework. This situation is met when 'series of results in mixture' (EPGs produced by reiterating PCR experiments over the same DNA mixture extract) have to be interpreted or when 'potentially related traces' (mixtures that can have contributors in common) require a combined interpretation. In these cases, there can be uncertainty on the genotype assignment, since: (a) more than one genotype combination fall under the same peak profile; (b) PCR preferential amplification alters pre-PCR allelic proportions; (c) other, more unpredictable technical problems (dropouts/dropins, etc.) take place. The uncertainty in the genotype assignment is in most cases addressed by empirical methods (selection of just one particular profile; extraction of consensual or composite profiles) that disregard part of the evidence. Genotype assignment should conversely take advantage from a joint Bayesian analysis (JBA) of all STRs peak areas generated at each experiment. This is the typical case of Bayesian analysis in which adoption of object-oriented Bayesian networks (OOBNs) could be highly helpful. Starting from experimentally designed mixtures, we created typical examples of 'series of results in mixture' of 'potentially related traces'. JBA was some administered to the whole peak area evidence, by specifically tailored OOBNs models, which enabled genotype assignment reflecting all the available evidence. Examples of a residual ambiguity in the genotype assignment came to light at assumed genotypes with partially overlapping alleles (for example: AB+AC→ABC). In the 'series of results in mixture', this uncertainty was in part refractory to the joint evaluation. Ambiguity was conversely dissipated at the 'potentially related' trace example, where the ABC allelic scheme at the first trace was interpreted together with other unambiguous combinations (ABCD; AB) at the related trace. We

  12. Separation of alcohols from organic liquid mixtures by pervaporation

    NARCIS (Netherlands)

    Park, Hyun-Chae

    1993-01-01

    In the chemical industry, distillation is generally the preferred technique to separate a liquid mixture. However some liquid mixtures such as azeotropic mixtures, close-boiling hydrocarbons, and various isomers are difficult to separate by simple distillation. For the separation of these mixtures

  13. 21 CFR 1310.12 - Exempt chemical mixtures.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Exempt chemical mixtures. 1310.12 Section 1310.12... CHEMICALS AND CERTAIN MACHINES § 1310.12 Exempt chemical mixtures. (a) The chemical mixtures meeting the... importation of listed chemicals contained in the exempt chemical mixture or the civil liability for unlawful...

  14. Productivity, botanical composition, and nutritive value of commercial pasture mixtures

    Science.gov (United States)

    Pastures in the northeastern USA often are planted to mixtures of grasses and legumes. There is limited public sector information on the performance of commercial forage mixtures. We evaluated a range of commercial pasture mixtures to determine if the number of species in a mixture affected yield an...

  15. Isotope mixture enrichment and equipment therefor

    International Nuclear Information System (INIS)

    Inchauspe, N.; Bearn, A. de.

    1973-01-01

    A mixture of isotopes of an element belonging to the third group-first subgroup, or the fourth group-first subgroup, or the sixth group-second subgroup, or the rare gases group of the periodic system in the gaseous phase is introduced into a chamber filled with a sorption medium showing fixation properties and with a damping gas, inert to the isotope mixture as well as to the sorption medium. The fraction enriched by the least adsorbed isotope may be trapped at the chamber output. (B.S.)

  16. Unfolding the potential of wheat cultivar mixtures

    DEFF Research Database (Denmark)

    Borg, J.; Kiær, Lars Pødenphant; Lecarpentier, C.

    2018-01-01

    Increasing the biodiversity of cropped plants is a key leverage for agroecology, aiming to replace chemical inputs by ecological processes and regulations. Cultivar mixtures are a straightforward way to increase within-crop diversity, but they have so far been poorly used by farmers and they are ......Increasing the biodiversity of cropped plants is a key leverage for agroecology, aiming to replace chemical inputs by ecological processes and regulations. Cultivar mixtures are a straightforward way to increase within-crop diversity, but they have so far been poorly used by farmers...

  17. in Binary Liquid Mixtures of Ethyl benzoate

    Directory of Open Access Journals (Sweden)

    Shaik Babu

    2012-01-01

    Full Text Available Ultrasonic velocity is measured at 2MHz frequency in the binary mixtures of Ethyl Benzoate with 1-Propanol, 1-Butanol, 1-Pentanol and theoretical values of ultrasonic velocity have been evaluated at 303K using Nomoto's relation, Impedance relation, Ideal mixture relation, Junjie's method and free length theory. Theoretical values are compared with the experimental values and the validity of the theories is checked by applying the chi-square test for goodness of fit and by calculating the average percentage error (APE. A good agreement has been found between experimental and Nomoto’s ultrasonic velocity.

  18. Thermophysical Properties of Fluids and Fluid Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Sengers, Jan V.; Anisimov, Mikhail A.

    2004-05-03

    The major goal of the project was to study the effect of critical fluctuations on the thermophysical properties and phase behavior of fluids and fluid mixtures. Long-range fluctuations appear because of the presence of critical phase transitions. A global theory of critical fluctuations was developed and applied to represent thermodynamic properties and transport properties of molecular fluids and fluid mixtures. In the second phase of the project, the theory was extended to deal with critical fluctuations in complex fluids such as polymer solutions and electrolyte solutions. The theoretical predictions have been confirmed by computer simulations and by light-scattering experiments. Fluctuations in fluids in nonequilibrium states have also been investigated.

  19. Plasma assisted combustion of parafin mixture

    International Nuclear Information System (INIS)

    Nedybaliuk, O.A.; Chernyak, V.Ya.; Martysh, E.V.; Lisitchenko, T.E.; Vergun, O.Yu.; Orlovska, S.G.

    2013-01-01

    In this work the results of solid paraffin combustion with the aid of the plasma of transverse and rotational gliding arc studies are represented. The question of the additional activation of paraffin based solid fuels is examined. The mixture of n-paraffin and stearin in the solid state as the model of the solid paraffin based fuel is used. The plasma assisted combustion of this model is experimentally investigated. The voltage-current characteristics of discharge at the different regimes are measured. The population temperatures of excited rotational levels are determined. The flame temperature during the combustion of solid paraffin containing mixture is calculated

  20. Flows and chemical reactions in homogeneous mixtures

    CERN Document Server

    Prud'homme, Roger

    2013-01-01

    Flows with chemical reactions can occur in various fields such as combustion, process engineering, aeronautics, the atmospheric environment and aquatics. The examples of application chosen in this book mainly concern homogeneous reactive mixtures that can occur in propellers within the fields of process engineering and combustion: - propagation of sound and monodimensional flows in nozzles, which may include disequilibria of the internal modes of the energy of molecules; - ideal chemical reactors, stabilization of their steady operation points in the homogeneous case of a perfect mixture and c

  1. MixtureTree annotator: a program for automatic colorization and visual annotation of MixtureTree.

    Directory of Open Access Journals (Sweden)

    Shu-Chuan Chen

    Full Text Available The MixtureTree Annotator, written in JAVA, allows the user to automatically color any phylogenetic tree in Newick format generated from any phylogeny reconstruction program and output the Nexus file. By providing the ability to automatically color the tree by sequence name, the MixtureTree Annotator provides a unique advantage over any other programs which perform a similar function. In addition, the MixtureTree Annotator is the only package that can efficiently annotate the output produced by MixtureTree with mutation information and coalescent time information. In order to visualize the resulting output file, a modified version of FigTree is used. Certain popular methods, which lack good built-in visualization tools, for example, MEGA, Mesquite, PHY-FI, TreeView, treeGraph and Geneious, may give results with human errors due to either manually adding colors to each node or with other limitations, for example only using color based on a number, such as branch length, or by taxonomy. In addition to allowing the user to automatically color any given Newick tree by sequence name, the MixtureTree Annotator is the only method that allows the user to automatically annotate the resulting tree created by the MixtureTree program. The MixtureTree Annotator is fast and easy-to-use, while still allowing the user full control over the coloring and annotating process.

  2. Spinodal decomposition of chemically reactive binary mixtures

    Science.gov (United States)

    Lamorgese, A.; Mauri, R.

    2016-08-01

    We simulate the influence of a reversible isomerization reaction on the phase segregation process occurring after spinodal decomposition of a deeply quenched regular binary mixture, restricting attention to systems wherein material transport occurs solely by diffusion. Our theoretical approach follows a diffuse-interface model of partially miscible binary mixtures wherein the coupling between reaction and diffusion is addressed within the frame of nonequilibrium thermodynamics, leading to a linear dependence of the reaction rate on the chemical affinity. Ultimately, the rate for an elementary reaction depends on the local part of the chemical potential difference since reaction is an inherently local phenomenon. Based on two-dimensional simulation results, we express the competition between segregation and reaction as a function of the Damköhler number. For a phase-separating mixture with components having different physical properties, a skewed phase diagram leads, at large times, to a system converging to a single-phase equilibrium state, corresponding to the absolute minimum of the Gibbs free energy. This conclusion continues to hold for the critical phase separation of an ideally perfectly symmetric binary mixture, where the choice of final equilibrium state at large times depends on the initial mean concentration being slightly larger or less than the critical concentration.

  3. Semiparametric mixtures in case-controlstudies

    NARCIS (Netherlands)

    Murphy, S.A.; van der Vaart, A.W.

    2001-01-01

    We consider likelihood based inference in a class of logistic models for case-control studies with a partially observed covariate. The likelihood is a combination of a nonparametric mixture, a parametric likelihood, and an empirical likelihood. We prove the asymptotic normality of the maximum

  4. Quantification of complex mixtures by NMR

    NARCIS (Netherlands)

    Duynhoven, van J.P.M.; Velzen, van E.; Jacobs, D.M.

    2013-01-01

    NMR has firmly established itself as an analytical tool that can quantify analyte concentrations in complex mixtures in a rapid, cost-effective, accurate and precise manner. Here, the technological advances with respect to instrumentation, sample preparation, data acquisition and data processing

  5. Spectrometric mixture analysis: An unexpected wrinkle

    Indian Academy of Sciences (India)

    Administrator

    The resulting calculation is simple, and typically yields a determinant ratio which, at least for a small number of mixture components, .... nes, both caffeine and theobromine have acid–base equilibria that make their ultraviolet spectra poten- tially pH-dependent. For a quantitative application of Beer's law we must therefore ...

  6. Concrete mixture characterization. Cementitious barriers partnership

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Protiere, Yannick [SIMCO Technologies, Inc., Quebec (Canada)

    2014-12-01

    This report summarizes the characterization study performed on two concrete mixtures used for radioactive waste storage. Both mixtures were prepared with approximately 425 kg of binder. The testing protocol mostly focused on determining the transport properties of the mixtures; volume of permeable voids (porosity), diffusion coefficients, and water permeability were evaluated. Tests were performed after different curing durations. In order to obtain data on the statistical distribution of transport properties, the measurements after 2 years of curing were performed on 10+ samples. Overall, both mixtures exhibited very low tortuosities and permeabilities, a direct consequence of their low water-to-binder ratio and the use of supplementary cementitious materials. The data generated on 2-year old samples showed that porosity, tortuosity and permeability follow a normal distribution. Chloride ponding tests were also performed on test samples. They showed limited chloride ingress, in line with measured transport properties. These test results also showed that both materials react differently with chloride, a consequence of the differences in the binder chemical compositions.

  7. Bayesian mixture models for partially verified data

    DEFF Research Database (Denmark)

    Kostoulas, Polychronis; Browne, William J.; Nielsen, Søren Saxmose

    2013-01-01

    Bayesian mixture models can be used to discriminate between the distributions of continuous test responses for different infection stages. These models are particularly useful in case of chronic infections with a long latent period, like Mycobacterium avium subsp. paratuberculosis (MAP) infection...

  8. A Skew-Normal Mixture Regression Model

    Science.gov (United States)

    Liu, Min; Lin, Tsung-I

    2014-01-01

    A challenge associated with traditional mixture regression models (MRMs), which rest on the assumption of normally distributed errors, is determining the number of unobserved groups. Specifically, even slight deviations from normality can lead to the detection of spurious classes. The current work aims to (a) examine how sensitive the commonly…

  9. Predicting diffusivities in dense fluid mixtures

    Directory of Open Access Journals (Sweden)

    C. DARIVA

    1999-09-01

    Full Text Available In this work the Enskog solution of the Boltzmann equation, as corrected by Speedy, together with the Weeks-Chandler-Andersen (WCA perturbation theory of liquids is employed in correlating and predicting self-diffusivities of dense fluids. Afterwards this theory is used to estimate mutual diffusion coefficients of solutes at infinite dilution in sub and supercritical solvents. We have also investigated the behavior of Fick diffusion coefficients in the proximity of a binary vapor-liquid critical point since this subject is of great interest for extraction purposes. The approach presented here, which makes use of a density and temperature dependent hard-sphere diameter, is shown to be excellent for predicting diffusivities in dense pure fluids and fluid mixtures. The calculations involved highly nonideal mixtures as well as systems with high molecular asymmetry. The predicted diffusivities are in good agreement with the experimental data for the pure and binary systems. The methodology proposed here makes only use of pure component information and density of mixtures. The simple algebraic relations are proposed without any binary adjustable parameters and can be readily used for estimating diffusivities in multicomponent mixtures.

  10. Toxicology of chemical mixtures: International perspective

    NARCIS (Netherlands)

    Feron, V.J.; Cassee, F.R.; Groten, J.P.

    1998-01-01

    This paper reviews major activities outside the United States on human health issues related to chemical mixtures. In Europe an international study group on combination effects has been formed and has started by defining synergism and antagonism. Successful research programs in Europe include the

  11. Methods and systems for deacidizing gaseous mixtures

    Science.gov (United States)

    Hu, Liang

    2010-05-18

    An improved process for deacidizing a gaseous mixture using phase enhanced gas-liquid absorption is described. The process utilizes a multiphasic absorbent that absorbs an acid gas at increased rate and leads to reduced overall energy costs for the deacidizing operation.

  12. The use of ternary mixtures in concrete.

    Science.gov (United States)

    2014-05-01

    This manual is a summary of the findings of a comprehensive study. Its purpose is to provide engineers with the information they need to make educated decisions on the use of ternary mixtures for constructing concrete structures. It discusses the eff...

  13. Advances in Chemical Mixtures Risk Methods

    Science.gov (United States)

    This presentation is an overview of emerging issues for dose addition in chemical mixtures risk assessment. It is intended to give the participants a perspective of recent developments in methods for dose addition. The workshop abstract is as follows:This problems-based, half-day...

  14. New developments in mixture toxicity parameters

    Energy Technology Data Exchange (ETDEWEB)

    Hermens, J.; Loon, W. van; Verhaar, H.; Leeuwen, K. van [Utrecht Univ. (Netherlands). Research Inst. of Toxicology

    1995-12-31

    The potential toxicological effects of complex organic mixtures in water are usually evaluated based on standard bioassays, chemical analyses or chemical assays such as Extractable Organic Halogen (EOX) content. There is a need for additional chemical and biochemical techniques which supply information on concentrations of chemicals and which can directly be translated into toxicological information. A major class of chemical pollutants in the environment consist out of baseline toxicity chemicals which act by narcosis. The major characteristic of effects (survival or growth inhibition) of mixtures of chemicals with baseline toxicity is that they are completely additive and occur at a fixed body burden. A parameter was recently developed which simulates bioaccumulation and which measures the total baseline toxicity of organic mixtures in water. The parameter is based on a simulation of bioconcentration and measurement of total molar concentrations via vapor pressure osmometry on a hydrophobic phase. In this presentation the results of the application of this procedure to effluents and surface water are presented. Moreover, the use of GC-MS as a technique for measuring total molar concentrations is presented. The results for total molar concentrations measured via vapor pressure osmometry and GS-MS are compared and both techniques essentially give the same answer. The application of the new approach in evaluating the effects of complex mixtures is discussed in the light of future developments.

  15. Mixture toxicity of PBT-like chemicals

    DEFF Research Database (Denmark)

    Syberg, Kristian; Dai, Lina; Ramskov, Tina

    beyond that of the individual components. Firstly, the effects of three chemicals with PBT-like properties (acetyl cedrene, pyrene and triclosan) was examined on the freshwater snail, Potamopyrgus antipodarum. Secondly, mixture bioaccumulation of the same three chemicals were assessed experimentally...

  16. The Coffee-Milk Mixture Problem Revisited

    Science.gov (United States)

    Marion, Charles F.

    2015-01-01

    This analysis of a problem that is frequently posed at professional development workshops, in print, and on the Web--the coffee-milk mixture riddle--illustrates the timeless advice of George Pólya's masterpiece on problem solving in mathematics, "How to Solve It." In his book, Pólya recommends that problems previously solved and put…

  17. Pool Boiling of Hydrocarbon Mixtures on Water

    Energy Technology Data Exchange (ETDEWEB)

    Boee, R.

    1996-09-01

    In maritime transport of liquefied natural gas (LNG) there is a risk of spilling cryogenic liquid onto water. The present doctoral thesis discusses transient boiling experiments in which liquid hydrocarbons were poured onto water and left to boil off. Composition changes during boiling are believed to be connected with the initiation of rapid phase transition in LNG spilled on water. 64 experimental runs were carried out, 14 using pure liquid methane, 36 using methane-ethane, and 14 using methane-propane binary mixtures of different composition. The water surface was open to the atmosphere and covered an area of 200 cm{sup 2} at 25 - 40{sup o}C. The heat flux was obtained by monitoring the change of mass vs time. The void fraction in the boiling layer was measured with a gamma densitometer, and a method for adapting this measurement concept to the case of a boiling cryogenic liquid mixture is suggested. Significant differences in the boil-off characteristics between pure methane and binary mixtures revealed by previous studies are confirmed. Pure methane is in film boiling, whereas the mixtures appear to enter the transitional boiling regime with only small amounts of the second component added. The results indicate that the common assumption that LNG will be in film boiling on water because of the high temperature difference, may be questioned. Comparison with previous work shows that at this small scale the results are influenced by the experimental apparatus and procedures. 66 refs., 76 figs., 28 tabs.

  18. Immunomodulatory Activity Of Saponin Mixture Isolated From ...

    African Journals Online (AJOL)

    An attempt has been made to assess the immunomodulatory activity of purified saponin mixture (PSM) isolated from the fruits of Lagenaria siceraria at three dose levels ranging from 50-150 mg/kg body weight in mice using haemagglutination antibody (HA) titre, delayed type hypersensitivity (DTH) and carbon clearance ...

  19. Mixture model analysis of complex samples

    NARCIS (Netherlands)

    Wedel, M; ter Hofstede, F; Steenkamp, JBEM

    1998-01-01

    We investigate the effects of a complex sampling design on the estimation of mixture models. An approximate or pseudo likelihood approach is proposed to obtain consistent estimates of class-specific parameters when the sample arises from such a complex design. The effects of ignoring the sample

  20. Spectrometric mixture analysis: An unexpected wrinkle

    Indian Academy of Sciences (India)

    The spectrometric analysis of a mixture of two chemically and spectroscopically similar compounds is illustrated for the simultaneous spectrometric determination of caffeine and theobromine, the primary stimulants in coffee and tea, based on their ultraviolet absorbances. Their analysis indicates that such measurements ...

  1. Experiments with Mixtures Designs, Models, and the Analysis of Mixture Data

    CERN Document Server

    Cornell, John A

    2011-01-01

    The most comprehensive, single-volume guide to conducting experiments with mixtures"If one is involved, or heavily interested, in experiments on mixtures of ingredients, one must obtain this book. It is, as was the first edition, the definitive work."-Short Book Reviews (Publication of the International Statistical Institute)"The text contains many examples with worked solutions and with its extensive coverage of the subject matter will prove invaluable to those in the industrial and educational sectors whose work involves the design and analysis of mixture experiments."-Journal of the Royal S

  2. Properties of Direct Coal Liquefaction Residue Modified Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Jie Ji

    2017-01-01

    Full Text Available The objectives of this paper are to use Direct Coal Liquefaction Residue (DLCR to modify the asphalt binders and mixtures and to evaluate the performance of modified asphalt mixtures. The dynamic modulus and phase angle of DCLR and DCLR-composite modified asphalt mixture were analyzed, and the viscoelastic properties of these modified asphalt mixtures were compared to the base asphalt binder SK-90 and Styrene-Butadiene-Styrene (SBS modified asphalt mixtures. The master curves of the asphalt mixtures were shown, and dynamic and viscoelastic behaviors of asphalt mixtures were described using the Christensen-Anderson-Marasteanu (CAM model. The test results show that the dynamic moduli of DCLR and DCLR-composite asphalt mixtures are higher than those of the SK-90 and SBS modified asphalt mixtures. Based on the viscoelastic parameters of CAM models of the asphalt mixtures, the high- and low-temperature performance of DLCR and DCLR-composite modified asphalt mixtures are obviously better than the SK-90 and SBS modified asphalt mixtures. In addition, the DCLR and DCLR-composite modified asphalt mixtures are more insensitive to the frequency compared to SK-90 and SBS modified asphalt mixtures.

  3. Equivalence of truncated count mixture distributions and mixtures of truncated count distributions.

    Science.gov (United States)

    Böhning, Dankmar; Kuhnert, Ronny

    2006-12-01

    This article is about modeling count data with zero truncation. A parametric count density family is considered. The truncated mixture of densities from this family is different from the mixture of truncated densities from the same family. Whereas the former model is more natural to formulate and to interpret, the latter model is theoretically easier to treat. It is shown that for any mixing distribution leading to a truncated mixture, a (usually different) mixing distribution can be found so that the associated mixture of truncated densities equals the truncated mixture, and vice versa. This implies that the likelihood surfaces for both situations agree, and in this sense both models are equivalent. Zero-truncated count data models are used frequently in the capture-recapture setting to estimate population size, and it can be shown that the two Horvitz-Thompson estimators, associated with the two models, agree. In particular, it is possible to achieve strong results for mixtures of truncated Poisson densities, including reliable, global construction of the unique NPMLE (nonparametric maximum likelihood estimator) of the mixing distribution, implying a unique estimator for the population size. The benefit of these results lies in the fact that it is valid to work with the mixture of truncated count densities, which is less appealing for the practitioner but theoretically easier. Mixtures of truncated count densities form a convex linear model, for which a developed theory exists, including global maximum likelihood theory as well as algorithmic approaches. Once the problem has been solved in this class, it might readily be transformed back to the original problem by means of an explicitly given mapping. Applications of these ideas are given, particularly in the case of the truncated Poisson family.

  4. Conditional Density Approximations with Mixtures of Polynomials

    DEFF Research Database (Denmark)

    Varando, Gherardo; López-Cruz, Pedro L.; Nielsen, Thomas Dyhre

    2015-01-01

    Mixtures of polynomials (MoPs) are a non-parametric density estimation technique especially designed for hybrid Bayesian networks with continuous and discrete variables. Algorithms to learn one- and multi-dimensional (marginal) MoPs from data have recently been proposed. In this paper we introduce...... is found. We illustrate and study the methods using data sampled from known parametric distributions, and we demonstrate their applicability by learning models based on real neuroscience data. Finally, we compare the performance of the proposed methods with an approach for learning mixtures of truncated...... basis functions (MoTBFs). The empirical results show that the proposed methods generally yield models that are comparable to or significantly better than those found using the MoTBF-based method....

  5. Probabilistic Discrete Mixtures Colour Texture Models

    Czech Academy of Sciences Publication Activity Database

    Haindl, Michal; Havlíček, Vojtěch; Grim, Jiří

    2008-01-01

    Roč. 2008, č. 5197 (2008), s. 675-682 ISSN 0302-9743. [Iberoamerican Congress on Pattern Recognition /13./. Havana, 09.092008-12.09.2008] R&D Projects: GA AV ČR 1ET400750407; GA MŠk 1M0572; GA ČR GA102/07/1594; GA ČR GA102/08/0593 Grant - others:GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : Discrete distribution mixtures * EM algorithm * texture modeling Subject RIV: BD - Theory of Information http://library.utia.cas.cz/separaty/2008/RO/haindl-havlicek-grim-probabilistic%20discrete%20mixtures%20colour%20texture%20models.pdf

  6. Sum of Bernoulli Mixtures: Beyond Conditional Independence

    Directory of Open Access Journals (Sweden)

    Taehan Bae

    2014-01-01

    Full Text Available We consider the distribution of the sum of Bernoulli mixtures under a general dependence structure. The level of dependence is measured in terms of a limiting conditional correlation between two of the Bernoulli random variables. The conditioning event is that the mixing random variable is larger than a threshold and the limit is with respect to the threshold tending to one. The large-sample distribution of the empirical frequency and its use in approximating the risk measures, value at risk and conditional tail expectation, are presented for a new class of models which we call double mixtures. Several illustrative examples with a Beta mixing distribution, are given. As well, some data from the area of credit risk are fit with the models, and comparisons are made between the new models and also the classical Beta-binomial model.

  7. NMRI Measurements of Flow of Granular Mixtures

    Science.gov (United States)

    Nakagawa, Masami; Waggoner, R. Allen; Fukushima, Eiichi

    1996-01-01

    We investigate complex 3D behavior of granular mixtures in shaking and shearing devices. NMRI can non-invasively measure concentration, velocity, and velocity fluctuations of flows of suitable particles. We investigate origins of wall-shear induced convection flow of single component particles by measuring the flow and fluctuating motion of particles near rough boundaries. We also investigate if a mixture of different size particles segregate into their own species under the influence of external shaking and shearing disturbances. These non-invasive measurements will reveal true nature of convecting flow properties and wall disturbance. For experiments in a reduced gravity environment, we will design a light weight NMR imager. The proof of principle development will prepare for the construction of a complete spaceborne system to perform experiments in space.

  8. Thermodynamic modeling of CO2 mixtures

    DEFF Research Database (Denmark)

    Bjørner, Martin Gamel

    Knowledge of the thermodynamic properties and phase equilibria of mixtures containing carbon dioxide (CO2) is important in several industrial processes such as enhanced oil recovery, carbon capture and storage, and supercritical extractions, where CO2 is used as a solvent. Despite this importance......, accurate predictions of the thermodynamic properties and phase equilibria of mixtures containing CO2 are challenging with classical models such as the Soave-Redlich-Kwong (SRK) equation of state (EoS). This is believed to be due to the fact, that CO2 has a large quadrupole moment which the classical models...... and with or without introducing an additional pure compound parameter. In the absence of quadrupolar compounds qCPA reduces to CPA, which itself reduces toSRK in the absence of association. As the number of adjustable parameters in thermodynamic models increase, the parameter estimation problem becomes increasingly...

  9. Sequential Estimation of Mixtures in Diffusion Networks

    Czech Academy of Sciences Publication Activity Database

    Dedecius, Kamil; Reichl, Jan; Djurić, P. M.

    2015-01-01

    Roč. 22, č. 2 (2015), s. 197-201 ISSN 1070-9908 R&D Projects: GA ČR(CZ) GP14-06678P Institutional support: RVO:67985556 Keywords : distributed estimation * mixture models * bayesian inference Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 1.661, year: 2015 http://library.utia.cas.cz/separaty/2014/AS/dedecius-0431479.pdf

  10. Texture modelling by discrete distribution mixtures

    Czech Academy of Sciences Publication Activity Database

    Grim, Jiří; Haindl, Michal

    2003-01-01

    Roč. 41, 3-4 (2003), s. 603-615 ISSN 0167-9473 R&D Projects: GA ČR GA102/00/0030; GA AV ČR KSK1019101 Institutional research plan: CEZ:AV0Z1075907 Keywords : discrete distribution mixtures * EM algorithm * texture modelling Subject RIV: JC - Computer Hardware ; Software Impact factor: 0.711, year: 2003

  11. Text document classification based on mixture models

    Czech Academy of Sciences Publication Activity Database

    Novovičová, Jana; Malík, Antonín

    2004-01-01

    Roč. 40, č. 3 (2004), s. 293-304 ISSN 0023-5954 R&D Projects: GA AV ČR IAA2075302; GA ČR GA102/03/0049; GA AV ČR KSK1019101 Institutional research plan: CEZ:AV0Z1075907 Keywords : text classification * text categorization * multinomial mixture model Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.224, year: 2004

  12. Bioavailability and variability of biphasic insulin mixtures

    DEFF Research Database (Denmark)

    Søeborg, Tue; Rasmussen, Christian Hove; Mosekilde, Erik

    2012-01-01

    Absorption of subcutaneously administered insulin is associated with considerable variability. Some of this variability was quantitatively explained for both soluble insulin and insulin suspensions in a recent contribution to this journal (Søeborg et al., 2009). In the present article, the absorp...... mixtures. The results can be used in both the development of novel insulin products and in the planning of the treatment of insulin dependent diabetic patients....

  13. Nitrocarburising in ammonia-hydrocarbon gas mixtures

    DEFF Research Database (Denmark)

    Pedersen, Hanne; Christiansen, Thomas; Somers, Marcel A. J.

    2010-01-01

    The present work investigates the possibility of nitrocarburising in ammonia-acetylene-hydrogen and ammoniapropene- hydrogen gas mixtures, where unsaturated hydrocarbon gas is the carbon source during nitrocarburising. Consequently, nitrocarburising is carried out in a reducing atmosphere...... microscopy and X-ray diffraction analysis. It is shown that the use of unsaturated hydrocarbon gas in nitrocarburising processes is a viable alternative to traditional nitrocarburising methods....

  14. Nitrocarburizing in ammonia-hydrocarbon gas mixtures

    DEFF Research Database (Denmark)

    Pedersen, Hanne; Christiansen, Thomas; Somers, Marcel A. J.

    2011-01-01

    The present work investigates the possibility of nitrocarburising in ammonia-acetylene-hydrogen and ammonia-propene-hydrogen gas mixtures, where unsaturated hydrocarbon gas is the carbon source during nitrocarburising. Consequently, nitrocarburising is carried out in a reducing atmosphere...... microscopy and X-ray diffraction analysis. It is shown that the use of unsaturated hydrocarbon gas in nitrocarburising processes is a viable alternative to traditional nitrocarburising methods....

  15. Structure of cholesterol/ceramide monolayer mixtures

    DEFF Research Database (Denmark)

    Scheffer, L.; Solomonov, I.; Weygand, M.J.

    2005-01-01

    The structure of monolayers of cholesterol/ ceramide mixtures was investigated using grazing incidence x-ray diffraction, immunofluorescence, and atomic force microscopy techniques. Grazing incidence x-ray diffraction measurements showed the existence of a crystalline mixed phase of the two....... As ceramide incorporates the lipid backbone common to all sphingolipids, this arrangement may be relevant to the understanding of the molecular organization of lipid rafts....

  16. Modeling text with generalizable Gaussian mixtures

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Sigurdsson, Sigurdur; Kolenda, Thomas

    2000-01-01

    We apply and discuss generalizable Gaussian mixture (GGM) models for text mining. The model automatically adapts model complexity for a given text representation. We show that the generalizability of these models depends on the dimensionality of the representation and the sample size. We discuss ...... the relation between supervised and unsupervised learning in the test data. Finally, we implement a novelty detector based on the density model....

  17. Manufacturing cycle for pure neon-helium mixture production

    International Nuclear Information System (INIS)

    Batrakov, B.P.; Kravchenko, V.A.

    1980-01-01

    The manufacturing cycle for pure neon-helium mixture production with JA-300 nitrogen air distributing device has been developed. Gas mixture containing 2-3% of neon-helium mixture (the rest is mainly nitrogen 96-97%) is selected out of the cover of the JA-300 column condensator and enters the deflegmator under the 2.3-2.5 atm. pressure. The diflegmator presents a heat exchange apparatus in which at 78 K liquid nitrogen the condensation of nitrogen from the mixture of gases entering from the JA-300 column takes place. The enriched gas mixture containing 65-70% of neon-helium mixture and 30-35% of nitrogen goes out from the deflegmator. This enriched neon-helium mixture enters the gasgoeder for impure (65-70%) neon-helium mixture. Full cleaning of-neon helium mixture of nitrogen is performed by means of an adsorber. As adsorbent an activated coal has been used. Adsorption occurs at the 78 K temperature of liquid nitrogen and pressure P=0.1 atm. As activated coal cooled down to nitrogen temperature adsorbs nitrogen better than neon and helium, the nitrogen from the mixture is completely adsorbed. Pure neon-helium mixture from the adsorber comes into a separate gasgolder. In one campaign the cycle allows obtaining 2 m 3 of the mixture. The mixture contains 0.14% of nitrogen, 0.01% of oxygen and 0.06% of hydrogen

  18. Dye mixtures for ultrafast wavelength shifters

    International Nuclear Information System (INIS)

    Gangopadhyay, S.; Liu, L.; Palsule, C.; Borst, W.; Wigmans, R.

    1994-01-01

    Particle detectors based on scintillation processes have been used since the discovery of radium about 100 years ago. The fast signals that can be obtained with these detectors, although often considered a nice asset, were rarely essential for the success of experiments. However, the new generation of high energy particle accelerators require particle detectors with fast response time. The authors have produced fast wavelength shifters using mixtures of various Coumarin dyes with DCM in epoxy-polymers (DGEBA+HHPA) and measured the properties of these wavelength shifters. The particular mixtures were chosen because there is a substantial overlap between the emission spectrum of Coumarin and the absorption spectrum of DCM. The continuous wave and time-resolved fluorescence spectra have been studied as a function of component concentration to optimize the decay times, emission peaks and quantum yields. The mean decay times of these mixtures are in the range of 2.5--4.5 ns. The mean decay time increases with an increase in Coumarin concentration at a fixed DCM concentration or with a decrease in DCM concentration at a fixed Coumarin concentration. This indicates that the energy transfer is radiative at lower relative DCM concentrations and becomes non-radiative at higher DCM concentrations

  19. Non-Genomic Effects of Xenoestrogen Mixtures

    Science.gov (United States)

    Viñas, René; Jeng, Yow-Jiun; Watson, Cheryl S.

    2012-01-01

    Xenoestrogens (XEs) are chemicals derived from a variety of natural and anthropogenic sources that can interfere with endogenous estrogens by either mimicking or blocking their responses via non-genomic and/or genomic signaling mechanisms. Disruption of estrogens’ actions through the less-studied non-genomic pathway can alter such functional end points as cell proliferation, peptide hormone release, catecholamine transport, and apoptosis, among others. Studies of potentially adverse effects due to mixtures and to low doses of endocrine-disrupting chemicals have recently become more feasible, though few so far have included actions via the non-genomic pathway. Physiologic estrogens and XEs evoke non-monotonic dose responses, with different compounds having different patterns of actions dependent on concentration and time, making mixture assessments all the more challenging. In order to understand the spectrum of toxicities and their mechanisms, future work should focus on carefully studying individual and mixture components across a range of concentrations and cellular pathways in a variety of tissue types. PMID:23066391

  20. Non-Genomic Effects of Xenoestrogen Mixtures

    Directory of Open Access Journals (Sweden)

    Yow-Jiun Jeng

    2012-07-01

    Full Text Available Xenoestrogens (XEs are chemicals derived from a variety of natural and anthropogenic sources that can interfere with endogenous estrogens by either mimicking or blocking their responses via non-genomic and/or genomic signaling mechanisms. Disruption of estrogens’ actions through the less-studied non-genomic pathway can alter such functional end points as cell proliferation, peptide hormone release, catecholamine transport, and apoptosis, among others. Studies of potentially adverse effects due to mixtures and to low doses of endocrine-disrupting chemicals have recently become more feasible, though few so far have included actions via the non-genomic pathway. Physiologic estrogens and XEs evoke non-monotonic dose responses, with different compounds having different patterns of actions dependent on concentration and time, making mixture assessments all the more challenging. In order to understand the spectrum of toxicities and their mechanisms, future work should focus on carefully studying individual and mixture components across a range of concentrations and cellular pathways in a variety of tissue types.

  1. Gaussian Process-Mixture Conditional Heteroscedasticity.

    Science.gov (United States)

    Platanios, Emmanouil A; Chatzis, Sotirios P

    2014-05-01

    Generalized autoregressive conditional heteroscedasticity (GARCH) models have long been considered as one of the most successful families of approaches for volatility modeling in financial return series. In this paper, we propose an alternative approach based on methodologies widely used in the field of statistical machine learning. Specifically, we propose a novel nonparametric Bayesian mixture of Gaussian process regression models, each component of which models the noise variance process that contaminates the observed data as a separate latent Gaussian process driven by the observed data. This way, we essentially obtain a Gaussian process-mixture conditional heteroscedasticity (GPMCH) model for volatility modeling in financial return series. We impose a nonparametric prior with power-law nature over the distribution of the model mixture components, namely the Pitman-Yor process prior, to allow for better capturing modeled data distributions with heavy tails and skewness. Finally, we provide a copula-based approach for obtaining a predictive posterior for the covariances over the asset returns modeled by means of a postulated GPMCH model. We evaluate the efficacy of our approach in a number of benchmark scenarios, and compare its performance to state-of-the-art methodologies.

  2. Robustifying Bayesian nonparametric mixtures for count data.

    Science.gov (United States)

    Canale, Antonio; Prünster, Igor

    2017-03-01

    Our motivating application stems from surveys of natural populations and is characterized by large spatial heterogeneity in the counts, which makes parametric approaches to modeling local animal abundance too restrictive. We adopt a Bayesian nonparametric approach based on mixture models and innovate with respect to popular Dirichlet process mixture of Poisson kernels by increasing the model flexibility at the level both of the kernel and the nonparametric mixing measure. This allows to derive accurate and robust estimates of the distribution of local animal abundance and of the corresponding clusters. The application and a simulation study for different scenarios yield also some general methodological implications. Adding flexibility solely at the level of the mixing measure does not improve inferences, since its impact is severely limited by the rigidity of the Poisson kernel with considerable consequences in terms of bias. However, once a kernel more flexible than the Poisson is chosen, inferences can be robustified by choosing a prior more general than the Dirichlet process. Therefore, to improve the performance of Bayesian nonparametric mixtures for count data one has to enrich the model simultaneously at both levels, the kernel and the mixing measure. © 2016, The International Biometric Society.

  3. Computational aspects of N-mixture models.

    Science.gov (United States)

    Dennis, Emily B; Morgan, Byron J T; Ridout, Martin S

    2015-03-01

    The N-mixture model is widely used to estimate the abundance of a population in the presence of unknown detection probability from only a set of counts subject to spatial and temporal replication (Royle, 2004, Biometrics 60, 105-115). We explain and exploit the equivalence of N-mixture and multivariate Poisson and negative-binomial models, which provides powerful new approaches for fitting these models. We show that particularly when detection probability and the number of sampling occasions are small, infinite estimates of abundance can arise. We propose a sample covariance as a diagnostic for this event, and demonstrate its good performance in the Poisson case. Infinite estimates may be missed in practice, due to numerical optimization procedures terminating at arbitrarily large values. It is shown that the use of a bound, K, for an infinite summation in the N-mixture likelihood can result in underestimation of abundance, so that default values of K in computer packages should be avoided. Instead we propose a simple automatic way to choose K. The methods are illustrated by analysis of data on Hermann's tortoise Testudo hermanni. © 2014 The Authors Biometrics published by Wiley Periodicals, Inc. on behalf of International Biometric Society.

  4. Statistical mechanical theory of fluid mixtures

    Science.gov (United States)

    Zhao, Yueqiang; Wu, Zhengming; Liu, Weiwei

    2014-01-01

    A general statistical mechanical theory of fluid mixtures (liquid mixtures and gas mixtures) is developed based on the statistical mechanical expression of chemical potential of components in the grand canonical ensemble, which gives some new relationships between thermodynamic quantities (equilibrium ratio Ki, separation factor α and activity coefficient γi) and ensemble average potential energy u for one molecule. The statistical mechanical expressions of separation factor α and activity coefficient γi derived in this work make the fluid phase equilibrium calculations can be performed by molecular simulation simply and efficiently, or by the statistical thermodynamic approach (based on the saturated-vapor pressure of pure substance) that does not need microscopic intermolecular pair potential functions. The physical meaning of activity coefficient γi in the liquid phase is discussed in detail from a viewpoint of molecular thermodynamics. The calculated Vapor-Liquid Equilibrium (VLE) properties of argon-methane, methanol-water and n-hexane-benzene systems by this model fit well with experimental data in references, which indicates that this model is accurate and reliable in the prediction of VLE properties for small, large and strongly associating molecules; furthermore the statistical mechanical expressions of separation factor α and activity coefficient γi have good compatibility with classical thermodynamic equations and quantum mechanical COSMO-SAC approach.

  5. Ethane-xenon mixtures under shock conditions

    Science.gov (United States)

    Flicker, Dawn; Magyar, Rudolph; Root, Seth; Cochrane, Kyle; Mattsson, Thomas

    2015-06-01

    Mixtures of light and heavy elements arise in inertial confinement fusion and planetary science. We present results on the physics of molecular scale mixing through a validation study of equation of state (EOS) properties. Density functional theory molecular dynamics (DFT/QMD) at elevated-temperature and pressure is used to obtain the properties of pure xenon, ethane, and various compressed mixture compositions along their principal Hugoniots. To validate the QMD simulations, we performed high-precision shock compression experiments using Sandia's Z-Machine. A bond tracking analysis of the simulations correlates the sharp rise in the Hugoniot curve with completion of dissociation in ethane. DFT-based simulation results compare well with experimental data and are used to provide insight into the dissociation as a function of mixture composition. Interestingly, we find that the compression ratio for complete dissociation is similar for ethane, Xe-ethane, polymethyl-pentene, and polystyrene, suggesting that a limiting compression exists for C-C bonded systems. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Company, Security Administration under contract DE-AC04-94AL85000.

  6. Catalytic Pyrolysis of Waste Plastic Mixture

    Science.gov (United States)

    Sembiring, Ferdianta; Wahyu Purnomo, Chandra; Purwono, Suryo

    2018-03-01

    Inorganic waste especially plastics still become a major problem in many places. Low biodegradability of this materials causes the effort in recycling become very difficult. Most of the municipal solid waste (MSW) recycling facilities in developing country only use composting method to recover the organic fraction of the waste, while the inorganic fraction is still untreated. By pyrolysis, plastic waste can be treated to produce liquid fuels, flammable gas and chars. Reduction in volume and utilization of the liquid and gas as fuel are the major benefits of the process. By heat integration actually this process can become a self-sufficient system in terms of energy demand. However, the drawback of this process is usually due to the diverse type of plastic in the MSW creating low grade of liquid fuel and harmful gases. In this study, the mixture of plastics i.e. polypropylene (PP) and polyethylene terephthalate (PET) is treated using pyrolysis with catalyst in several operating temperature. PET is problematic to be treated using pyrolysis due to wax-like byproduct in liquid which may cause pipe clogging. The catalyst is the mixture of natural zeolite and bentonite which is able to handle PP and PET mixture feed to produce high grade liquid fuels in terms of calorific value and other fuel properties.

  7. Separation of gas mixtures by supported complexes

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, D.A.; Lilga, M.A.; Hallen, R.T.; Lyke, S.E.

    1986-08-01

    The goal of this program is to determine the feasibility of solvent-dissolved coordination complexes for the separation of gas mixtures under bench-scale conditions. In particular, mixtures such as low-Btu gas are examined for CO and H/sub 2/ separation. Two complexes, Pd/sub 2/(dpm)/sub 2/Br/sub 2/ and Ru(CO)/sub 2/(PPh/sub 3/)/sub 3/, were examined in a bench-scale apparatus for the separation of binary (CO-N/sub 2/ or H/sub 2/-N/sub 2/) and quinary (H/sub 2/, CO, CO/sub 2/, CH/sub 4/, and N/sub 2/) mixtures. The separation of CO-N/sub 2/ was enhanced by the presence of the palladium complex in the 1,1,2-trichloroethane (TCE) solvent, especially at high gas and low liquid rates. The five-component gas mixture separation with the palladium complex in TCE provided quite unexpected results based on physical solubility and chemical coordination. The complex retained CO, while the solvent retained CO/sub 2/, CH/sub 4/, and N/sub 2/ to varying degrees. This allowed the hydrogen content to be enhanced due to its low solubility in TCE and inertness to the complex. Thus, a one-step, hydrogen separation can be achieved from gas mixtures with compositions similar to that of oxygen-blown coal gas. A preliminary economic evaluation of hydrogen separation was made for a system based on the palladium complex. The palladium system has a separation cost of 50 to 60 cents/MSCF with an assumed capital investment of $1.60/MSCF of annual capacity charged at 30% per year. This assumes a 3 to 4 year life for the complex. Starting with a 90% hydrogen feed, PSA separation costs are in the range of 30 to 50 cents/MSCF. The ruthenium complex was not as successful for hydrogen or carbon monoxide separation due to unfavorable kinetics. The palladium complex was found to strip hydrogen gas from H/sub 2/S. The complex could be regenerated with mild oxidants which removed the sulfur as SO/sub 2/. 24 refs., 26 figs., 10 tabs.

  8. Chemical Mixture Risk Assessment Additivity-Based Approaches

    Science.gov (United States)

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  9. Implementation of warm-mix asphalt mixtures in Nebraska pavements.

    Science.gov (United States)

    2012-07-01

    The primary objective of this research is to evaluate the feasibility of several WMA mixtures as potential asphalt paving : mixtures for Nebraska pavements. To that end, three well-known WMA additives (i.e., Sasobit, Evotherm, and Advera : synthetic ...

  10. REFLEAK: NIST Leak/Recharge Simulation Program for Refrigerant Mixtures

    Science.gov (United States)

    SRD 73 NIST REFLEAK: NIST Leak/Recharge Simulation Program for Refrigerant Mixtures (PC database for purchase)   REFLEAK estimates composition changes of zeotropic mixtures in leak and recharge processes.

  11. Characterization of Alaskan HMA mixtures with the simple performance tester.

    Science.gov (United States)

    2014-05-01

    Material characterization provides basic and essential information for pavement design and the evaluation of hot mix asphalt (HMA). : This study focused on the accurate characterization of an Alaskan HMA mixture using an asphalt mixture performance t...

  12. Multivariate mixtures of Erlangs for density estimation under censoring

    NARCIS (Netherlands)

    Verbelen, R.; Antonio, K.; Claeskens, G.

    2016-01-01

    Multivariate mixtures of Erlang distributions form a versatile, yet analytically tractable, class of distributions making them suitable for multivariate density estimation. We present a flexible and effective fitting procedure for multivariate mixtures of Erlangs, which iteratively uses the EM

  13. Mixture Density Mercer Kernels: A Method to Learn Kernels

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper presents a method of generating Mercer Kernels from an ensemble of probabilistic mixture models, where each mixture model is generated from a Bayesian...

  14. Performance evaluation of Louisiana superpave mixtures : tech summary.

    Science.gov (United States)

    2008-12-01

    The primary objective of this research was to evaluate the fundamental engineering : properties and mixture performance of Superpave hot mix asphalt (HMA) mixtures : in Louisiana through laboratory mechanistic tests, aggregate gradation analysis, and...

  15. Perfect posterior simulation for mixture and hidden Marko models

    DEFF Research Database (Denmark)

    Berthelsen, Kasper Klitgaard; Breyer, Laird A.; Roberts, Gareth O.

    2010-01-01

    In this paper we present an application of the read-once coupling from the past algorithm to problems in Bayesian inference for latent statistical models. We describe a method for perfect simulation from the posterior distribution of the unknown mixture weights in a mixture model. Our method...... is extended to a more general mixture problem, where unknown parameters exist for the mixture components, and to a hidden Markov model....

  16. Investigation of a Gamma model for mixture STR samples

    DEFF Research Database (Denmark)

    Christensen, Susanne; Bøttcher, Susanne Gammelgaard; Lauritzen, Steffen L.

    The behaviour of PCR Amplification Kit, when used for mixture STR samples, is investigated. A model based on the Gamma distribution is fitted to the amplifier output for constructed mixtures, and the assumptions of the model is evaluated via residual analysis.......The behaviour of PCR Amplification Kit, when used for mixture STR samples, is investigated. A model based on the Gamma distribution is fitted to the amplifier output for constructed mixtures, and the assumptions of the model is evaluated via residual analysis....

  17. A Convex Hull Formulation for the Design of Optimal Mixtures

    OpenAIRE

    Jonuzaj, S; Adjiman, CS

    2016-01-01

    The design of mixtures plays an important role in improving process and product performance but is challenging because it requires finding the optimal number, identities and compositions of mixture components and using nonlinear property models. To address this, a general modeling framework for mixture design problems is presented. It integrates Generalized Disjunctive Programming (GDP) into Computer-Aided Mixture/blend Design via Hull Reformulation (HR). The design methodology is applied suc...

  18. Optimal (Solvent) Mixture Design through a Decomposition Based CAMD methodology

    OpenAIRE

    Achenie, L.; Karunanithi, Arunprakash T.; Gani, Rafiqul

    2004-01-01

    Computer Aided Molecular/Mixture design (CAMD) is one of the most promising techniques for solvent design and selection. A decomposition based CAMD methodology has been formulated where the mixture design problem is solved as a series of molecular and mixture design sub-problems. This approach is able to overcome most of the difficulties associated with the solution of mixture design problems. The new methodology has been illustrated with the help of a case study involving the design of solve...

  19. Liquid class predictor for liquid handling of complex mixtures

    Science.gov (United States)

    Seglke, Brent W [San Ramon, CA; Lekin, Timothy P [Livermore, CA

    2008-12-09

    A method of establishing liquid classes of complex mixtures for liquid handling equipment. The mixtures are composed of components and the equipment has equipment parameters. The first step comprises preparing a response curve for the components. The next step comprises using the response curve to prepare a response indicator for the mixtures. The next step comprises deriving a model that relates the components and the mixtures to establish the liquid classes.

  20. Stability Studies of a Mixture of Paracetamol and Ascorbic Acid ...

    African Journals Online (AJOL)

    Purpose: To determine the effect of the temperature of water used for the preparation of paracetamol and ascorbic acid mixture on its stability, as well as to assess the influence of humidity on the stability of single components and their mixtures. Methods: The stability of the mixtures in aqueous medium was evaluated with ...

  1. Plant relations in mixtures of Trifolium subterraneum cv. Midmar: II ...

    African Journals Online (AJOL)

    Land Equivalent Ratios (LER) were calculated for mixtures of Trifolium subterraneum and Lolium multiflorum in terms of dry matter production and crude protein production. This ratio denotes the yield advantage, if any, of a specific mixture against the pure stands of the different components. The mixture receiving 240 kg N ...

  2. Energy utitlzation by broilers fed different micro-nutrient mixtures ...

    African Journals Online (AJOL)

    Feeding micro-nutrient mixture B improved energy efficiency. It was concluded that the poor performance and the poor energy efficiency of C-fed broilers was as a result of the micronutrient imbalance of the mixture since the mixture is deficient in Zinc and four B-vitamins that affect energy utilization. It also contains ...

  3. Peptide de novo sequencing of mixture tandem mass spectra

    DEFF Research Database (Denmark)

    Gorshkov, Vladimir; Hotta, Stéphanie Yuki Kolbeck; Braga, Thiago Verano

    2016-01-01

    The impact of mixture spectra deconvolution on the performance of four popular de novo sequencing programs was tested using artificially constructed mixture spectra as well as experimental proteomics data. Mixture fragmentation spectra are recognized as a limitation in proteomics because they dec...

  4. Bayesian D-Optimal Choice Designs for Mixtures

    NARCIS (Netherlands)

    A. Ruseckaite (Aiste); P.P. Goos (Peter); D. Fok (Dennis)

    2014-01-01

    markdownabstract__Abstract__ Consumer products and services can often be described as mixtures of ingredients. Examples are the mixture of ingredients in a cocktail and the mixture of different components of waiting time (e.g., in-vehicle and out-of-vehicle travel time) in a transportation

  5. 40 CFR 792.113 - Mixtures of substances with carriers.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Mixtures of substances with carriers... § 792.113 Mixtures of substances with carriers. (a) For each test, control, or reference substance that... the uniformity of the mixture and to determine, periodically, the concentration of the test, control...

  6. 40 CFR 160.113 - Mixtures of substances with carriers.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Mixtures of substances with carriers... Mixtures of substances with carriers. (a) For each test, control, or reference substance that is mixed with... uniformity of the mixture and to determine, periodically, the concentration of the test, control, or...

  7. 21 CFR 58.113 - Mixtures of articles with carriers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures... by appropriate analytical methods shall be conducted: (1) To determine the uniformity of the mixture...

  8. TEMPERATURE INFLUENCE ON PHASE STABILITY OF ETHANOL-GASOLINE MIXTURES

    Directory of Open Access Journals (Sweden)

    Valerian Cerempei

    2011-06-01

    Full Text Available The article investigates phase stability of ethanol-gasoline mixtures depending on their composition, water concentration in ethanol and ethanol-gasoline mixture and temperature. There have been determined the perfect functioning conditions of spark ignition engines fueled with ethanol-gasoline mixtures.

  9. Lessons learned in managing alfalfa-grass mixtures

    Science.gov (United States)

    Grass-alfalfa mixtures have a number of benefits that make them attractive to producers. However, they can be problematic to establish and maintain. Research programs have made progress in understanding the benefits and challenges of alfalfa-grass mixtures. Mixtures may have greater winter survival ...

  10. Low temperature irradiation of vitrifiable mixtures of unsaturated monomers

    International Nuclear Information System (INIS)

    Kaetsu, I.; Ito, A.; Hayashi, K.

    1975-01-01

    A specific mixture containing at least one polymerizable unsaturated monomer which is not vitrifiable by itself can advantageously be polymerized by irradiating the mixture at a temperature not higher than 100 0 C above glass transition temperature of the mixture with an ionizing radiation and/or a light. 12 claims, 6 drawings, figures

  11. Recycling Solvent Mixtures of Ethyl Acetate and Hexanes

    Science.gov (United States)

    Wilkinson, Timothy J.

    1998-12-01

    A method to recycle ethyl acetate-hexanes mixtures from thin-layer or column chromatography experiments is described. The procedure consists of co-distillation of the mixture followed by estimation of the composition by reference to an Rf vs percent composite graph. The mixture is then diluted with the appropriate solvent to achieve the desired composition.

  12. Hycrest Crested Wheatgrass Accelerates the Degradation of Pentachlorophenol in Soil

    OpenAIRE

    Ferro, A.; Sims, Ronald C.; Bugbee, B.

    1994-01-01

    We investigated the effects of vegetation on the fate of pentachlorophenol (PCP) in soil using a novel high-flow sealed test system. Pentachlorophenol has been widely used as a wood preservative, and this highly toxic biocide contaminates soil and ground water at many sites. Although plants are known to accelerate the rates of degradation of certain soil contaminants, this approach has not been thoroughly investigated for PCP. The fate of [14C]PCP, added to soil at a concentration of 100 mg/k...

  13. Confirmation of gluten-free status of wheatgrass

    Science.gov (United States)

    Celiac Disease (CD) and other gluten related disorders causes both malabsorption of nutrients and an abnormal immune reaction to gluten, the only effective therapy is a gluten-free diet. Codex Alimentarius sets the threshold level at 20 mg/kg gluten for gluten-free foods and this threshold has been ...

  14. Modeling phase equilibria for acid gas mixtures using the CPA equation of state. Part II: Binary mixtures with CO2

    DEFF Research Database (Denmark)

    Tsivintzelis, Ioannis; Kontogeorgis, Georgios; Michelsen, Michael Locht

    2011-01-01

    In Part I of this series of articles, the study of H2S mixtures has been presented with CPA. In this study the phase behavior of CO2 containing mixtures is modeled. Binary mixtures with water, alcohols, glycols and hydrocarbons are investigated. Both phase equilibria (vapor–liquid and liquid–liqu...

  15. Some properties of explosive mixtures containing peroxides Part I. Relative performance and detonation of mixtures with triacetone triperoxide.

    Science.gov (United States)

    Zeman, Svatopluk; Trzciński, Waldemar A; Matyás, Robert

    2008-06-15

    This study concerns mixtures of triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP) and ammonium nitrate (AN) with added water (W), as the case may be, and dry mixtures of TATP with urea nitrate (UN). Relative performances (RP) of the mixtures and their individual components, relative to TNT, were determined by means of ballistic mortar. The detonation energies, E0, and detonation velocities, D, were calculated for the mixtures studied by means of the thermodynamic code CHEETAH. Relationships have been found and are discussed between the RP and the E0 values related to unit volume of gaseous products of detonation of these mixtures. These relationships together with those between RP and oxygen balance values of the mixtures studied indicate different types of participation of AN and UN in the explosive decomposition of the respective mixtures. Dry TATP/UN mixtures exhibit lower RP than analogous mixtures TATP/AN containing up to 25% of water. Depending on the water content, the TATP/AN mixtures possess higher detonability values than the ANFO explosives. A semi-logarithmic relationship between the D values and oxygen coefficients has been derived for all the mixtures studied at the charge density of 1000 kg m(-3). Among the mixtures studied, this relationship distinguishes several samples of the type of "tertiary explosives" as well as samples that approach "high explosives" in their performances and detonation velocities.

  16. An equiratio mixture model for non-additive components : a case study for aspartame/acesulfame-K mixtures

    NARCIS (Netherlands)

    Schifferstein, H.N.J.

    1996-01-01

    The Equiratio Mixture Model predicts the psychophysical function for an equiratio mixture type on the basis of the psychophysical functions for the unmixed components. The model reliably estimates the sweetness of mixtures of sugars and sugar-alchohols, but is unable to predict intensity for

  17. Flows and chemical reactions in heterogeneous mixtures

    CERN Document Server

    Prud'homme, Roger

    2014-01-01

    This book - a sequel of previous publications 'Flows and Chemical Reactions' and 'Chemical Reactions in Flows and Homogeneous Mixtures' - is devoted to flows with chemical reactions in heterogeneous environments.  Heterogeneous media in this volume include interfaces and lines. They may be the site of radiation. Each type of flow is the subject of a chapter in this volume. We consider first, in Chapter 1, the question of the generation of environments biphasic individuals: dusty gas, mist, bubble flow.  Chapter 2 is devoted to the study at the mesoscopic scale: particle-fluid exchange of mom

  18. Diffusive flux of energy in binary mixtures

    International Nuclear Information System (INIS)

    Sampaio, R.S.

    1976-04-01

    The diffusive flux of energy j tilde is studied through the reduced diffusive flux of energy K tilde, which obeys equations of the form: sim(delta K tilde/delta grad rho sub(α))= sim(delta K tilde/delta grad theta)=0. By a representation theorem, herein proved, is obtained a general representation for K tilde which is simplified, for the case of binary mixtures, using the principle of objectivity. Some consequences of this representation are discussed such as the symmetry of the partial stresses T 1 tilde and T 2 tilde and the difference between the normal stresses [pt

  19. Thermodynamic properties of mixtures of liquids

    International Nuclear Information System (INIS)

    Benedetti, A.V.; Cilense, M.; Vollet, D.

    1982-01-01

    The molar excess enthalpy (H sup(-E)) of water-ethanol has been measured at 298.15, 306.85, 313.95 and 319.75 K. The mixtures are exothermics at studied temperatures with minimum values of -785, -655, -555 and -490 J. mol -1 respectively, at value of X 2 about 0.16. The other thermodynamics properties have been obtained from experimental data and data from literature. The results are interpreted qualitatively by considering molecular interactions in solution. (Author) [pt

  20. Computing Properties Of Chemical Mixtures At Equilibrium

    Science.gov (United States)

    Mcbride, B. J.; Gordon, S.

    1995-01-01

    Scientists and engineers need data on chemical equilibrium compositions to calculate theoretical thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93 is general program that calculates chemical equilibrium compositions and properties of mixtures for any chemical system for which thermodynamic data are available. Includes thermodynamic data for more than 1,300 gaseous and condensed species and thermal-transport data for 151 gases. Written in FORTRAN 77.

  1. Gaussian mixture model of heart rate variability.

    Directory of Open Access Journals (Sweden)

    Tommaso Costa

    Full Text Available Heart rate variability (HRV is an important measure of sympathetic and parasympathetic functions of the autonomic nervous system and a key indicator of cardiovascular condition. This paper proposes a novel method to investigate HRV, namely by modelling it as a linear combination of Gaussians. Results show that three Gaussians are enough to describe the stationary statistics of heart variability and to provide a straightforward interpretation of the HRV power spectrum. Comparisons have been made also with synthetic data generated from different physiologically based models showing the plausibility of the Gaussian mixture parameters.

  2. Pycnonuclear reaction rates for binary ionic mixtures

    Science.gov (United States)

    Ichimaru, S.; Ogata, S.; Van Horn, H. M.

    1992-01-01

    Through a combination of compositional scaling arguments and examinations of Monte Carlo simulation results for the interparticle separations in binary-ionic mixture (BIM) solids, we have derived parameterized expressions for the BIM pycnonuclear rates as generalizations of those in one-component solids obtained previously by Salpeter and Van Horn and by Ogata et al. We have thereby discovered a catalyzing effect of the heavier elements, which enhances the rates of reactions among the lighter elements when the charge ratio exceeds a critical value of approximately 2.3.

  3. Two-microphone Separation of Speech Mixtures

    DEFF Research Database (Denmark)

    2006-01-01

    In this demonstration we show the separation of 3-7 mixed speech sources based on information from two microphones. Separation with background noise is demonstrated too. The algorithms are described in 1] Michael Syskind Pedersen, DeLiang Wang, Jan Larsen and Ulrik Kjems: "Two-microphone Separation...... of Speech Mixtures," 2006, submited for journal publication. See also, [2] Michael Syskind Pedersen, DeLiang Wang, Jan Larsen and Ulrik Kjems: "Overcomplete Blind Source Separation by Combining ICA and Binary Time-Frequency Masking," in proceedings of IEEE International workshop on Machine Learning...

  4. Mixture densities, maximum likelihood, and the EM algorithm

    Science.gov (United States)

    Redner, R. A.; Walker, H. F.

    1982-01-01

    The problem of estimating the parameters which determine a mixture density is reviewed as well as maximum likelihood estimation for it. A particular iterative procedure for numerically approximating maximum likelihood estimates for mixture density problems is considered. This EM algorithm, is a specialization to the mixture density context of a general algorithm of the same name used to approximate maximum likelihood estimates for incomplete data problems. The formulation and theoretical and practical properties of the EM algorithm for mixture densities are discussed focussing in particular on mixtures of densities from exponential families.

  5. Optimal (Solvent) Mixture Design through a Decomposition Based CAMD methodology

    DEFF Research Database (Denmark)

    Achenie, L.; Karunanithi, Arunprakash T.; Gani, Rafiqul

    2004-01-01

    Computer Aided Molecular/Mixture design (CAMD) is one of the most promising techniques for solvent design and selection. A decomposition based CAMD methodology has been formulated where the mixture design problem is solved as a series of molecular and mixture design sub-problems. This approach is...... is able to overcome most of the difficulties associated with the solution of mixture design problems. The new methodology has been illustrated with the help of a case study involving the design of solvent-anti solvent binary mixtures for crystallization of Ibuprofen....

  6. Toxicity of combined mixtures of nanoparticles to plants.

    Science.gov (United States)

    Jośko, Izabela; Oleszczuk, Patryk; Skwarek, Ewa

    2017-06-05

    An increasing production and using of nanoproducts results in releasing and dispersing nanoparticles (NPs) in the environment. Being released into various environment components, NPs may interact with numerous pollutants, including other NPs. This research aimed at assessing toxicity of combined binary mixtures of NPs. The study focused on assessing mixtures of NPs believed to be toxic (nano-ZnO+nano-CuO) and nano-ZnO/nano-CuO with the ones that are insignificantly toxic or non-toxic NPs (nano-TiO 2 /nano-Cr 2 O 3 /nano-Fe 2 O 3 ). Toxicity of combined mixtures proved comparable to toxicity of individual mixtures of NPs (the sum of effects triggered by individual types of NPs comprising respective mixtures). Toxicity evaluation was based on two parameters: seed germination and inhibition of root growth with respect to four plant species: Lepidium sativum, Linum utisassimmum, Cucumis sativus and Triticum aestivum. The findings showed combined mixtures of NPs to be significantly less toxic in comparison to individual mixtures, irrespective of their components. Within the scope of concentrations used, greatest differences between the toxicity of mixtures were reported at the 100mgL -1 concentration. Toxicity levels of combined and individual mixtures might have been determined by a lower total concentration of Zn and Cu metals and a greater aggregation of particles in combined mixtures than in individual mixtures. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. mixtools: An R Package for Analyzing Mixture Models

    Directory of Open Access Journals (Sweden)

    Tatiana Benaglia

    2009-10-01

    Full Text Available The mixtools package for R provides a set of functions for analyzing a variety of finite mixture models. These functions include both traditional methods, such as EM algorithms for univariate and multivariate normal mixtures, and newer methods that reflect some recent research in finite mixture models. In the latter category, mixtools provides algorithms for estimating parameters in a wide range of different mixture-of-regression contexts, in multinomial mixtures such as those arising from discretizing continuous multivariate data, in nonparametric situations where the multivariate component densities are completely unspecified, and in semiparametric situations such as a univariate location mixture of symmetric but otherwise unspecified densities. Many of the algorithms of the mixtools package are EM algorithms or are based on EM-like ideas, so this article includes an overview of EM algorithms for finite mixture models.

  8. Health and environmental effects of complex chemical mixtures: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    The Office of Health and Environmental Research (OHER) of the Department of Energy supports a broad long-term research program on human health and environmental effects from potential exposure to energy-related complex chemical mixtures. The program seeks basic mechanistic data on the effects of complex mixtures at the cellular, molecular, and whole animal levels to aid in predicting human health effects and seeks ecological data on biological and physical transformations in the mixtures, concentrations of the mixtures in various compartments of the environment, and potential routes for human exposure to these mixtures (e.g., food chain). On June 17-18, 1985, OHER held its First Annual Technical Meeting on the Complex Chemical Mixtures Program in Chicago, IL. The primary purpose of the meeting was to enable principal investigators to report the research status and accomplishments of ongoing complex chemical mixture studies supported by OHER. To help focus future research directions round table discussions were conducted.

  9. DDT in methane-air mixtures

    Science.gov (United States)

    Kuznetsov, M.; Ciccarelli, G.; Dorofeev, S.; Alekseev, V.; Yankin, Yu.; Kim, T. H.

    Experimental results from a study on the critical condition for deflagration-to-detonation transition (DDT) in methane-air mixtures are presented. Experiments were carried out at 293 K and 1 atm using methane-air mixtures with methane concentrations ranging from 5.5 to 17% vol. The tests were performed in detonation tubes with inner-diameters of 174 mm and 520 mm. Detonation cell widths λ were determined in the tests for a range of methane concentrations. The results of DDT tests indicate that for a tube cross-sectional area blockage ratio (BR) of 0.3 the critical condition for DDT can be characterized by the d/λ = 1 criterion. However, for a BR = 0.6 the critical value d/λ was significantly higher. The data also show that the critical condition for DDT can be described by L/λ = 7, where L is the characteristic length-scale of the channel volume between orifice plates. This length-scale is defined by a grouping of the orifice plate dimensions (inner and outer-diameter) and plate spacing.

  10. Developmental Exposure to an Environmental PCB Mixture ...

    Science.gov (United States)

    Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6 mg/kg/day of the PCB mixture dissolved in corn oil vehicle during the perinatal period. On postnatal day (PND) 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200 µA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating an attenuated focal (amygdala) excitability. A delay in kindling progression from a focally stimulated limbic site stands in contrast to our previous finding of increase

  11. Rutting performance of cold bituminous emulsion mixtures

    Science.gov (United States)

    Arshad, Ahmad Kamil; Ali, Noor Azilatom; Shaffie, Ekarizan; Hashim, Wardati; Rahman, Zanariah Abd

    2017-10-01

    Cold Bituminous Emulsion Mixture (CBEM) is an environmentally friendly alternative to hot mix asphalt (HMA) for road surfacing, due to its low energy requirements. However, CBEM has generally been perceived to be less superior in performance, compared to HMA. This paper details a laboratory study on the rutting performance of CBEM. The main objective of this study is to determine the Marshall properties of CBEM and to evaluate the rutting performance. The effect of cement in CBEM was also evaluated in this study. The specimens were prepared using Marshall Mix Design Method and rutting performance was evaluated using the Asphalt Pavement Analyzer (APA). Marshall Properties were analysed to confirm compliance with the PWD Malaysia's specification requirements. The rutting performance for specimens with cement was also found to perform better than specimens without cement. It can be concluded that Cold Bituminous Emulsion Mixtures (CBEM) with cement is a viable alternative to Hot Mix Asphalt (HMA) as their Marshall Properties and performance obtained from this study meets the requirements of the specifications. It is recommended that further study be conducted on CBEM for other performance criteria such as moisture susceptibility and fatigue.

  12. Thermodynamics of organic mixtures containing amines

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Juan Antonio [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain)]. E-mail: jagl@termo.uva.es; Mozo, Ismael [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain); Fuente, Isaias Garcia de la [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain); Cobos, Jose Carlos [G.E.T.E.F. Dpto Termodinamica y Fisica Aplicada, Facultad de Ciencias, Universidad de Valladolid, Valladolid 47071 (Spain)

    2006-02-01

    Binary mixtures containing pyridine (PY), or 2-methylpyridine (2MPY) or 3-methylpyridine (3MPY) or 4-methylpyridine (4MPY) and an organic solvent as benzene, toluene, alkane, or 1-alkanol are investigated in the framework of DISQUAC. The corresponding interaction parameters are reported. The model describes accurately a whole set of thermodynamic properties: vapor-liquid equilibria (VLE), liquid-liquid equilibria (LLE), solid-liquid equilibria (SLE), molar excess Gibbs energies (G{sup E}), molar excess enthalpies (H{sup E}), molar excess heat capacities at constant pressure (C{sub P}{sup E}) and the concentration-concentration structure factor (S{sub CC}(0)). It is remarkable that DISQUAC correctly predicts the W-shaped curve of the C{sub P}{sup E} of the pyridine + n-hexadecane system. The model can be applied successfully to mixtures with strong positive or negative deviations from the Raoult's law. DISQUAC improves the theoretical results from UNIFAC (Dortmund version). The replacement of pyridine by a methylpyridine leads to a weakening of the amine-amine interactions, ascribed to the steric effect caused by the methyl group attached to the aromatic ring. This explains that for a given solvent (alkane, 1-alkanol) H{sup E}(pyridine)>H{sup E}(methylpyridine)

  13. Acid resistance of sewer pipe concrete mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, M. G.; Fourie, C. [Cape Town Univ., Dept. of Civil Engineering (South Africa)

    2000-07-01

    Using hydrochloric acid in a test method developed at the University of Cape Town, six different sets of concrete materials were measured for acid resistance. One of the six mixtures was a standard mix used for the preparation of sewer pipes by the roller suspension method; the other five were variations of the standard mix, modified by the partial replacement of the standard cement with slag, fly ash, condensed silica fume or metakaolin. In one test mixture, normal portland cement was replaced by a calcium aluminate cement. At 28 days the physical properties of concrete with admixtures of silica fume and metakaolin were superior to the other concretes, although the acid resistance of metakaolin concrete showed no improvement despite otherwise superior quality. The concrete containing condensed silica fume showed marked improvement in acid resistance It showed a lower percentage of mass loss and hydrogen ion consumption than other concretes. This concrete also compacted well, indicating its high suitability for the production of sewer pipes with the roller suspension method. Slag and fly ash concretes did not gain strength rapidly enough and calcium aluminate also showed limited capacity to protect the sewer pipes from bacterial attack, despite its reputed toxicity to the Thiobacillus bacteria, which is the principal agent of acid attack in sewer pipes. 8 refs., 5 tabs., 3 figs.

  14. Thermodynamics of organic mixtures containing amines

    International Nuclear Information System (INIS)

    Gonzalez, Juan Antonio; Mozo, Ismael; Fuente, Isaias Garcia de la; Cobos, Jose Carlos

    2006-01-01

    Binary mixtures containing pyridine (PY), or 2-methylpyridine (2MPY) or 3-methylpyridine (3MPY) or 4-methylpyridine (4MPY) and an organic solvent as benzene, toluene, alkane, or 1-alkanol are investigated in the framework of DISQUAC. The corresponding interaction parameters are reported. The model describes accurately a whole set of thermodynamic properties: vapor-liquid equilibria (VLE), liquid-liquid equilibria (LLE), solid-liquid equilibria (SLE), molar excess Gibbs energies (G E ), molar excess enthalpies (H E ), molar excess heat capacities at constant pressure (C P E ) and the concentration-concentration structure factor (S CC (0)). It is remarkable that DISQUAC correctly predicts the W-shaped curve of the C P E of the pyridine + n-hexadecane system. The model can be applied successfully to mixtures with strong positive or negative deviations from the Raoult's law. DISQUAC improves the theoretical results from UNIFAC (Dortmund version). The replacement of pyridine by a methylpyridine leads to a weakening of the amine-amine interactions, ascribed to the steric effect caused by the methyl group attached to the aromatic ring. This explains that for a given solvent (alkane, 1-alkanol) H E (pyridine)>H E (methylpyridine)

  15. Equilibrium study for ternary mixtures of biodiesel

    Science.gov (United States)

    Doungsri, S.; Sookkumnerd, T.; Wongkoblap, A.; Nuchitprasittichai, A.

    2017-11-01

    The liquid-liquid equilibrium (LLE) data for the ternary mixtures of methanol + fatty acid methyl ester (FAME) + palm oil and FAME + palm oil + glycerol at various temperatures from 35 to 55°C, the tie lines and binodial curves were also investigated and plotted in the equilibrium curve. The experimental results showed that the binodial curves of methanol + FAME + palm oil depended significantly with temperature while the binodial curves of FAME + palm oil + glycerol illustrated insignificant change with temperatures. The interaction parameters between liquid pair obtained for NRTL (Nonrandom Two-Liquid) and UNIQUAC (Universal Quasi-Chemical Theory) models from the experimental data were also investigated. It was found that the correlated parameters of UNIQUAC model for system of FAME + palm oil + glycerol, denoted as a13 and a31, were 580.42K and -123.69K, respectively, while those for system of methanol + FAME + palm oil, denoted as a42 and a24, were 71.48 K and 965.57K, respectively. The ternary LLE data reported here would be beneficial for engineers and scientists to use for prediction of yield and purity of biodiesel for the production. The UNIQUAC model agreed well with the experimental data of ternary mixtures of biodiesel.

  16. Thermal neutron diffusion parameters in homogeneous mixtures

    International Nuclear Information System (INIS)

    Drozdowicz, K.; Krynicka, E.

    1995-01-01

    A physical background is presented for a computer program which calculates the thermal neutron diffusion parameters for homogeneous mixtures of any compounds. The macroscopic absorption, scattering and transport cross section of the mixture are defined which are generally function of the incident neutron energy. The energy-averaged neutron parameters are available when these energy dependences and the thermal neutron energy distribution are assumed. Then the averaged diffusion coefficient and the pulsed thermal neutron parameters (the absorption rare and the diffusion constant) are also defined. The absorption cross section is described by the 1/v law and deviations from this behaviour are considered. The scattering cross section can be assumed as being almost constant in the thermal neutron region (which results from the free gas model). Serious deviations are observed for hydrogen atoms bound in molecules and a special study in the paper is devoted to this problem. A certain effective scattering cross section is found in this case on a base of individual exact data for a few hydrogenous media. Approximations assumed for the average cosine of the scattering angle are also discussed. The macroscopic parameters calculated are averaged over the Maxwellian energy distribution for the thermal neutron flux. An information on the input data for the computer program is included. (author). 10 refs, 4 figs, 5 tabs

  17. Use of Adhesion Promoters in Asphalt Mixtures

    Directory of Open Access Journals (Sweden)

    Cihlářová Denisa

    2018-03-01

    Full Text Available The purpose of asphalt binder as a significant binder in road constructions is to permanently bind aggregates of different compositions and grain sizes. The asphalt binder itself does not have suitable adhesiveness, so after a period of time, bare grains can appear. This results in a gradual separation of the grains from an asphalt layer and the presence of potholes in a pavement. Adhesion promoters or adhesive agents are important and proven promoters in practice. They are substances mainly based on the fatty acids of polyamides which should increase the reliability of the asphalt’s binder adhesion to the aggregates, thus increasing the lifetime period of the asphalt mixture as well as its resistance to mechanical strain. The amount of a promoter or agent added to the asphalt mixture is negligible and constitutes about 0.3% of the asphalt’s binder weight. Nevertheless, even this quantity significantly increases the adhesive qualities of an asphalt binder. The article was created in cooperatation with the Slovak University of Technology, in Bratislava, Slovakia, and focuses on proving the new AD2 adhesive additive and comparing it with the Addibit and Wetfix BE promoters used on aggregates from the Skuteč - Litická and Bystřec quarries.

  18. Honeybees learn odour mixtures via a selection of key odorants.

    Directory of Open Access Journals (Sweden)

    Judith Reinhard

    2010-02-01

    Full Text Available The honeybee has to detect, process and learn numerous complex odours from her natural environment on a daily basis. Most of these odours are floral scents, which are mixtures of dozens of different odorants. To date, it is still unclear how the bee brain unravels the complex information contained in scent mixtures.This study investigates learning of complex odour mixtures in honeybees using a simple olfactory conditioning procedure, the Proboscis-Extension-Reflex (PER paradigm. Restrained honeybees were trained to three scent mixtures composed of 14 floral odorants each, and then tested with the individual odorants of each mixture. Bees did not respond to all odorants of a mixture equally: They responded well to a selection of key odorants, which were unique for each of the three scent mixtures. Bees showed less or very little response to the other odorants of the mixtures. The bees' response to mixtures composed of only the key odorants was as good as to the original mixtures of 14 odorants. A mixture composed of the other, non-key-odorants elicited a significantly lower response. Neither an odorant's volatility or molecular structure, nor learning efficiencies for individual odorants affected whether an odorant became a key odorant for a particular mixture. Odorant concentration had a positive effect, with odorants at high concentration likely to become key odorants.Our study suggests that the brain processes complex scent mixtures by predominantly learning information from selected key odorants. Our observations on key odorant learning lend significant support to previous work on olfactory learning and mixture processing in honeybees.

  19. Honeybees Learn Odour Mixtures via a Selection of Key Odorants

    Science.gov (United States)

    Reinhard, Judith; Sinclair, Michael; Srinivasan, Mandyam V.; Claudianos, Charles

    2010-01-01

    Background The honeybee has to detect, process and learn numerous complex odours from her natural environment on a daily basis. Most of these odours are floral scents, which are mixtures of dozens of different odorants. To date, it is still unclear how the bee brain unravels the complex information contained in scent mixtures. Methodology/Principal Findings This study investigates learning of complex odour mixtures in honeybees using a simple olfactory conditioning procedure, the Proboscis-Extension-Reflex (PER) paradigm. Restrained honeybees were trained to three scent mixtures composed of 14 floral odorants each, and then tested with the individual odorants of each mixture. Bees did not respond to all odorants of a mixture equally: They responded well to a selection of key odorants, which were unique for each of the three scent mixtures. Bees showed less or very little response to the other odorants of the mixtures. The bees' response to mixtures composed of only the key odorants was as good as to the original mixtures of 14 odorants. A mixture composed of the other, non-key-odorants elicited a significantly lower response. Neither an odorant's volatility or molecular structure, nor learning efficiencies for individual odorants affected whether an odorant became a key odorant for a particular mixture. Odorant concentration had a positive effect, with odorants at high concentration likely to become key odorants. Conclusions/Significance Our study suggests that the brain processes complex scent mixtures by predominantly learning information from selected key odorants. Our observations on key odorant learning lend significant support to previous work on olfactory learning and mixture processing in honeybees. PMID:20161714

  20. A numerical study of laminar flames propagating in stratified mixtures

    Science.gov (United States)

    Zhang, Jiacheng

    Numerical simulations are carried out to study the structure and speed of laminar flames propagating in compositionally and thermally stratified fuel-air mixtures. The study is motivated by the need to understand the physics of flame propagation in stratified-charge engines and model it. The specific question of interest in this work is: how does the structure and speed of the flame in the stratified mixture differ from that of the flame in a corresponding homogeneous mixture at the same equivalence ratio, temperature, and pressure? The studies are carried out in hydrogen-air, methane-air, and n-heptane-air mixtures. A 30-species 184-step skeletal mechanism is employed for methane oxidation, a 9-species 21-step mechanism for hydrogen oxidation, and a 37-species 56-step skeletal mechanism for n-heptane oxidation. Flame speed and structure are compared with corresponding values for homogeneous mixtures. For compositionally stratified mixtures, as shown in prior experimental work, the numerical results suggest that when the flame propagates from a richer mixture to a leaner mixture, the flame speed is faster than the corresponding speed in the homogeneous mixture. This is caused by enhanced diffusion of heat and species from the richer mixture to the leaner mixture. In fact, the effects become more pronounced in leaner mixtures. Not surprisingly, the stratification gradient influences the results with shallower gradients showing less effect. The controlling role that diffusion plays is further assessed and confirmed by studying the effect of a unity Lewis number assumption in the hydrogen/air mixtures. Furthermore, the effect of stratification becomes less important when using methane or n-heptane as fuel. The laminar flame speed in a thermally stratified mixture is similar to the laminar flame speed in homogeneous mixture at corresponding unburned temperature. Theoretical analysis is performed and the ratio of extra thermal diffusion rate to flame heat release rate

  1. Concrete pavement mixture design and analysis (MDA) : effect of aggregate systems on concrete mixture properties.

    Science.gov (United States)

    2012-07-01

    For years, specifications have focused on the water to cement ratio (w/cm) and strength of concrete, despite the majority of the volume : of a concrete mixture consisting of aggregate. An aggregate distribution of roughly 60% coarse aggregate and 40%...

  2. Mechanical and economical impacts of adding polymers into asphalt mixtures

    Directory of Open Access Journals (Sweden)

    Souliman Mena

    2017-01-01

    Full Text Available Load associated fatigue cracking is one of the major distress types occurring in flexible pavements. Flexural bending beam fatigue laboratory test has been used for several decades and is considered an integral part of the Superpave advanced characterization procedure. One of the most significant solutions to sustain the fatigue life for an asphaltic mixture is to add sustainable materials such as polymers to the asphalt mixture. A laboratory testing program was performed on two gap-graded mixtures: unmodified and polymer-modified asphalt mixtures. Strain controlled fatigue tests were conducted according to the AASHTO T321 procedure. The results from the beam fatigue tests indicated that the polymer-modified gap graded mixture would have much longer fatigue life compared to the reference (unmodified mixture. In addition, a mechanistic analysis using 3D-Move software coupled with a cost-effectiveness analysis study based on the fatigue performance on the three mixtures were performed. Overall, the analysis showed that the polymer-modified asphalt mixture exhibited significantly higher cost-effectiveness compared to unmodified HMA mixture. Although polymer-modification increases the cost of the material, the analysis showed that it is more cost effective than the unmodified mixture.

  3. A mechanistic model for rational design of optimal cellulase mixtures.

    Science.gov (United States)

    Levine, Seth E; Fox, Jerome M; Clark, Douglas S; Blanch, Harvey W

    2011-11-01

    A model-based framework is described that permits the optimal composition of cellulase enzyme mixtures to be found for lignocellulose hydrolysis. The rates of hydrolysis are shown to be dependent on the nature of the substrate. For bacterial microcrystalline cellulose (BMCC) hydrolyzed by a ternary cellulase mixture of EG2, CBHI, and CBHII, the optimal predicted mixture was 1:0:1 EG2:CBHI:CBHII at 24 h and 1:1:0 at 72 h, at loadings of 10 mg enzyme per g substrate. The model was validated with measurements of soluble cello-oligosaccharide production from BMCC during both single enzyme and mixed enzyme hydrolysis. Three-dimensional diagrams illustrating cellulose conversion were developed for mixtures of EG2, CBHI, CBHII acting on BMCC and predicted for other substrates with a range of substrate properties. Model predictions agreed well with experimental values of conversion after 24 h for a variety of enzyme mixtures. The predicted mixture performances for substrates with varying properties demonstrated the effects of initial degree of polymerization (DP) and surface area on the performance of cellulase mixtures. For substrates with a higher initial DP, endoglucanase enzymes accounted for a larger fraction of the optimal mixture. Substrates with low surface areas showed significantly reduced hydrolysis rates regardless of mixture composition. These insights, along with the quantitative predictions, demonstrate the utility of this model-based framework for optimizing cellulase mixtures. Copyright © 2011 Wiley Periodicals, Inc.

  4. Urea and deuterium mixtures at high pressures

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, M., E-mail: m.donnelly-2@sms.ed.ac.uk; Husband, R. J.; Frantzana, A. D.; Loveday, J. S. [Centre for Science at Extreme Conditions and School of Physics and Astronomy, The University of Edinburgh, Erskine Williamson Building, Peter Guthrie Tait Road, The King’s Buildings, Edinburgh EH9 3FD (United Kingdom); Bull, C. L. [ISIS, Rutherford Appleton Laboratory, Oxford Harwell, Didcot OX11 0QX (United Kingdom); Klotz, S. [IMPMC, CNRS UMR 7590, Université P and M Curie, 4 Place Jussieu, 75252 Paris (France)

    2015-03-28

    Urea, like many network forming compounds, has long been known to form inclusion (guest-host) compounds. Unlike other network formers like water, urea is not known to form such inclusion compounds with simple molecules like hydrogen. Such compounds if they existed would be of interest both for the fundamental insight they provide into molecular bonding and as potential gas storage systems. Urea has been proposed as a potential hydrogen storage material [T. A. Strobel et al., Chem. Phys. Lett. 478, 97 (2009)]. Here, we report the results of high-pressure neutron diffraction studies of urea and D{sub 2} mixtures that indicate no inclusion compound forms up to 3.7 GPa.

  5. Deconvolution estimation of mixture distributions with boundaries

    Science.gov (United States)

    Lee, Mihee; Hall, Peter; Shen, Haipeng; Marron, J. S.; Tolle, Jon; Burch, Christina

    2013-01-01

    In this paper, motivated by an important problem in evolutionary biology, we develop two sieve type estimators for distributions that are mixtures of a finite number of discrete atoms and continuous distributions under the framework of measurement error models. While there is a large literature on deconvolution problems, only two articles have previously addressed the problem taken up in our article, and they use relatively standard Fourier deconvolution. As a result the estimators suggested in those two articles are degraded seriously by boundary effects and negativity. A major contribution of our article is correct handling of boundary effects; our method is asymptotically unbiased at the boundaries, and also is guaranteed to be nonnegative. We use roughness penalization to improve the smoothness of the resulting estimator and reduce the estimation variance. We illustrate the performance of the proposed estimators via our real driving application in evolutionary biology and two simulation studies. Furthermore, we establish asymptotic properties of the proposed estimators. PMID:24009793

  6. Wetting and evaporation of binary mixture drops.

    Science.gov (United States)

    Sefiane, Khellil; David, Samuel; Shanahan, Martin E R

    2008-09-11

    Experimental results on the wetting behavior of water, methanol, and binary mixture sessile drops on a smooth, polymer-coated substrate are reported. The wetting behavior of evaporating water/methanol drops was also studied in a water-saturated environment. Drop parameters (contact angle, shape, and volume) were monitored in time. The effects of the initial relative concentrations on subsequent evaporation and wetting dynamics were investigated. Physical mechanisms responsible for the various types of wetting behavior during different stages are proposed and discussed. Competition between evaporation and hydrodynamic flow are evoked. Using an environment saturated with water vapor allowed further exploration of the controlling mechanisms and underlying processes. Wetting stages attributed to differential evaporation of methanol were identified. Methanol, the more volatile component, evaporates predominantly in the initial stage. The data, however, suggest that a small proportion of methanol remained in the drop after the first stage of evaporation. This residual methanol within the drop seems to influence subsequent wetting behavior strongly.

  7. Dynamics of Polymer Thin Film Mixtures

    Science.gov (United States)

    Besancon, Brian M.; Green, Peter F.; Soles, Christopher L.

    2006-03-01

    We examined the influence of film thickness and composition on the glass transition temperature (Tg) and mean square atomic displacements (MSD) of thin film mixtures of deuterated polystyrene (dPS) and tetramethyl bisphenol-A polycarbonate (TMPC) on Si/SiOx substrates using incoherent elastic neutron scattering (ICNS). The onset of dissipative motions, such as those associated with the glass transition and sub-Tg relaxations, are manifested as ``kinks'' in the curve of elastic intensity (or MSD) versus temperature. From the relevant kinks, the Tg was determined as a function of composition and of film thickness. The dependence of the Tg on film thickness exhibited qualitatively similar trends, at a given composition, as determined by the ICNS and ellipsometry measurements. However, with increasing PS content, the values of Tg measured by INS were consistently larger then those measured by ellipsometry. These results are examined in light of existing models on the thin film glass transition and component blend dynamics.

  8. Performance of asphalt mixture incorporating recycled waste

    Science.gov (United States)

    Hamid, Nor Baizura; Abdullah, Mohd Ezree; Sanik, Mohd Erwan; Mokhtar, Mardiha; Kaamin, Masiri; Raduan, Rasyidah; Ramli, Mohd Zakwan

    2017-12-01

    Nowadays, the amount of premix waste was increased every year, especially at the batching plants. Normally, the waste materials will be discarded without doing any innovative and effective research about those materials. This situation has become one of the global concerns due to the increasing number of premix waste produced every year. Therefore, the aim of this study is to evaluate the performance of hot mix asphalt (HMA) using premix waste on improving asphalt mixture fatigue behaviour. The method used in this study was Superpave mix design method. The sample conducted in this study were 0%, 10%, 20%, 30%, and 100% of premix waste respectively. For a binder test, the laboratory test conducted were penetration test, softening test and thin film oven test while for the performance test were resilient modulus test and indirect tensile fatigue test. From the laboratory test, the resilient modulus test was conducted with two different temperature which was 25°C and 40°C. The result from that test was 20% of premix waste had higher resilient modulus at that two different temperatures compared to another samples. From that test also shown that the sample at the lower temperature which was 25°C has higher resilient modulus compared to the temperature of 40°C. Indirect tensile fatigue test showed that the 30% of premix waste sample was suitable for the modified asphalt mixture with referring to the maximum deformation and strain for comparison control, 10%,20%, and 100% of premix waste samples. So, it can be concluded that premix waste inhibits great potential as road construction material and suitable for repeated traffic loading.

  9. Computer simulation-molecular-thermodynamic framework to predict the micellization behavior of mixtures of surfactants: application to binary surfactant mixtures.

    Science.gov (United States)

    Iyer, Jaisree; Mendenhall, Jonathan D; Blankschtein, Daniel

    2013-05-30

    We present a computer simulation-molecular-thermodynamic (CSMT) framework to model the micellization behavior of mixtures of surfactants in which hydration information from all-atomistic simulations of surfactant mixed micelles and monomers in aqueous solution is incorporated into a well-established molecular-thermodynamic framework for mixed surfactant micellization. In addition, we address the challenges associated with the practical implementation of the CSMT framework by formulating a simpler mixture CSMT model based on a composition-weighted average approach involving single-component micelle simulations of the mixture constituents. We show that the simpler mixture CSMT model works well for all of the binary surfactant mixtures considered, except for those containing alkyl ethoxylate surfactants, and rationalize this finding molecularly. The mixture CSMT model is then utilized to predict mixture CMCs, and we find that the predicted CMCs compare very well with the experimental CMCs for various binary mixtures of linear surfactants. This paper lays the foundation for the mixture CSMT framework, which can be used to predict the micellization properties of mixtures of surfactants that possess a complex chemical architecture, and are therefore not amenable to traditional molecular-thermodynamic modeling.

  10. Thermal analysis of pyrotechnic mixture-fireworks, atom-bomb

    International Nuclear Information System (INIS)

    Rajendran, Jeya; Thanulingam, T.L.

    2008-01-01

    Sound level produced from two varieties of sound producing fireworks of atom-bomb, cake bomb and thunder bomb were measured. The pyrotechnic mixture, KNO 3 /S/Al(H 3 BO 3 ) of compositions 57.5/19.9/22.1(0.5)% very much similar to commercial atom-bomb were taken and five cake bomb and seven thunder bomb with different net weight of chemicals were manufactured specifically for analysis. Cake bomb with 1g pyrotechnic mixture and thunder bomb with 2g pyrotechnic mixture produce -3 . Ignition temperature of the mixture is above the melting point of the metallic fuel, Al (660 deg C) and self propagating decomposition occurred at high temperature. The pyrotechnic mixture, KNO 3 /S/Al(H 3 BO 3 ) is a safe mixture from accidental factor, static electricity. DSC studies indicate slight formation of potassium nitrite with evolution of NO above 400 deg C. (author)

  11. Odor mixture alters neural resources during symbolic problem solving.

    Science.gov (United States)

    Lorig, Tyler S; Malin, Emily L; Horwitz, Julie E

    2005-05-01

    The smell of a cup of coffee is produced by many different odor chemicals combined in a mixture, yet the perception of that odor is of a single unified whole. Recent evidence has demonstrated that mixtures of odors share some of the same spatiotemporal features of speech sounds and may use similar brain resources in associating those features with the symbols they represent. This experiment investigated the hypothesis that an odor mixture would interfere with a math task that requires symbolic but not spatial processing. Results indicated the pattern of brain electrical activity was similar for the single odors and the mixture during spatial processing. During solution of the task requiring symbolic processing, the odor mixture produced a pattern of brain electrical activity different from the single odorants. These data suggest that the perception of odor mixtures may use some of the same resources associated with symbolic processing.

  12. Residual-based model diagnosis methods for mixture cure models.

    Science.gov (United States)

    Peng, Yingwei; Taylor, Jeremy M G

    2017-06-01

    Model diagnosis, an important issue in statistical modeling, has not yet been addressed adequately for cure models. We focus on mixture cure models in this work and propose some residual-based methods to examine the fit of the mixture cure model, particularly the fit of the latency part of the mixture cure model. The new methods extend the classical residual-based methods to the mixture cure model. Numerical work shows that the proposed methods are capable of detecting lack-of-fit of a mixture cure model, particularly in the latency part, such as outliers, improper covariate functional form, or nonproportionality in hazards if the proportional hazards assumption is employed in the latency part. The methods are illustrated with two real data sets that were previously analyzed with mixture cure models. © 2016, The International Biometric Society.

  13. Mixture of Regression Models with Single-Index

    OpenAIRE

    Xiang, Sijia; Yao, Weixin

    2016-01-01

    In this article, we propose a class of semiparametric mixture regression models with single-index. We argue that many recently proposed semiparametric/nonparametric mixture regression models can be considered special cases of the proposed model. However, unlike existing semiparametric mixture regression models, the new pro- posed model can easily incorporate multivariate predictors into the nonparametric components. Backfitting estimates and the corresponding algorithms have been proposed for...

  14. Statistical Description of Segregation in a Powder Mixture

    DEFF Research Database (Denmark)

    Chapiro, Alexander; Stenby, Erling Halfdan

    1996-01-01

    In this paper we apply the statistical mechanics of powders to describe a segregated state in a mixture of grains of different sizes. Variation of the density of a packing with depth arising due to changes of particle configurations is studied. The statistical mechanics of powders is generalized...... in such a way as to consider not only binary mixtures (as its first formulation by A. Mehta and S.F. Edwards), but also polydisperse mixtures of particles....

  15. Bayesian D-Optimal Choice Designs for Mixtures

    OpenAIRE

    Aiste Ruseckaite; Peter Goos; Dennis Fok

    2014-01-01

    markdownabstract__Abstract__ Consumer products and services can often be described as mixtures of ingredients. Examples are the mixture of ingredients in a cocktail and the mixture of different components of waiting time (e.g., in-vehicle and out-of-vehicle travel time) in a transportation setting. Choice experiments may help to determine how the respondents' choice of a product or service is affected by the combination of ingredients. In such studies, individuals are confronted with sets of ...

  16. Antiandrogenic activity of phthalate mixtures: Validity of concentration addition

    Energy Technology Data Exchange (ETDEWEB)

    Christen, Verena [University of Applied Sciences Northwestern Switzerland, School of Life Sciences, Gründenstrasse 40, CH-4132 Muttenz (Switzerland); Crettaz, Pierre; Oberli-Schrämmli, Aurelia [Swiss Federal Office of Public Health, Division Chemical Products, 3003 Bern (Switzerland); Fent, Karl, E-mail: karl.fent@bluewin.ch [University of Applied Sciences Northwestern Switzerland, School of Life Sciences, Gründenstrasse 40, CH-4132 Muttenz (Switzerland); Swiss Federal Institute of Technology Zürich (ETH Zürich), Department of Environmental Sciences, 8092 Zürich (Switzerland)

    2012-03-01

    Phthalates and bisphenol A have very widespread use leading to significant exposure of humans. They are suspected to interfere with the endocrine system, including the androgen, estrogen and the thyroid hormone system. Here we analyzed the antiandrogenic activity of six binary, and one ternary mixture of phthalates exhibiting complete antiandrogenic dose–response curves, and binary mixtures of phthalates and bisphenol A at equi-effective concentrations of EC{sub 10}, EC{sub 25} and EC{sub 50} in MDA-kb2 cells. Mixture activity followed the concentration addition (CA) model with a tendency to synergism at high and antagonism at low concentrations. Isoboles and the toxic unit approach (TUA) confirmed the additive to synergistic activity of the binary mixtures BBP + DBP, DBP + DEP and DEP + BPA at high concentrations. Both methods indicate a tendency to antagonism for the EC{sub 10} mixtures BBP + DBP, BBP + DEP and DBP + DEP, and the EC{sub 25} mixture of DBP + BPA. A ternary mixture revealed synergism at the EC{sub 50}, and weak antagonistic activity at the EC{sub 25} level by the TUA. A mixture of five phthalates representing a human urine composition and reflecting exposure to corresponding parent compounds showed no antiandrogenic activity. Our study demonstrates that CA is an appropriate concept to account for mixture effects of antiandrogenic phthalates and bisphenol A. The interaction indicates a departure from additivity to antagonism at low concentrations, probably due to interaction with the androgen receptor and/or cofactors. This study emphasizes that a risk assessment of phthalates should account for mixture effects by applying the CA concept. -- Highlights: ► Antiandrogenic activity of mixtures of 2 and 3 phthalates are assessed in MDA-kb2 cells. ► Mixture activities followed the concentration addition model. ► A tendency to synergism at high and antagonism at low levels occurred.

  17. Genetic Evidence for Recent Population Mixture in India

    OpenAIRE

    Moorjani, Priya; Thangaraj, Kumarasamy; Patterson, Nick; Lipson, Mark; Loh, Po-Ru; Govindaraj, Periyasamy; Berger, Bonnie; Reich, David; Singh, Lalji

    2013-01-01

    Most Indian groups descend from a mixture of two genetically divergent populations: Ancestral North Indians (ANI) related to Central Asians, Middle Easterners, Caucasians, and Europeans; and Ancestral South Indians (ASI) not closely related to groups outside the subcontinent. The date of mixture is unknown but has implications for understanding Indian history. We report genome-wide data from 73 groups from the Indian subcontinent and analyze linkage disequilibrium to estimate ANI-ASI mixture ...

  18. Mixture Experiments and their Application in Agricultural Research

    OpenAIRE

    Raza, Irum; Masood, M. Asif; Mahmood, Rashid

    2013-01-01

    The present study was designed to show the applicability of Mixture designs in Agricultural Research System and to fit an appropriate mixture regression model making response variables as functions of the proportions of the mixture components. Data on four components namely neem oil, garlic oil, clove oil and tobacco extract (ml) were collected from field experiment conducted by Honeybee Research Institute, NARC. The main goal of the experiment was to check whether blending two components hav...

  19. Determination of thermal conductivity in foundry mould mixtures

    Directory of Open Access Journals (Sweden)

    G. Solenički

    2010-01-01

    Full Text Available For a thorough understanding of the behaviour of foundry mould mixtures, a good knowledge of thermal properties of mould materials is needed. Laboratory determination of thermal conductivity of mould mixtures enables a better control over scabbing defects which are a major problem in green sand mould mixtures. A special instrument has been designed for that purpose and it is described in this work.

  20. DURABILITY OF ASPHALT CONCRETE MIXTURES USING DOLOMITE AGGREGATES

    Directory of Open Access Journals (Sweden)

    Imad Al-Shalout

    2015-12-01

    Full Text Available This study deals with the durability of asphalt concrete, including the effects of different gradations, compaction temperatures and immersion time on the durability potential of mixtures. The specific objectives of this study are: to investigate the effect of compaction temperature on the mechanical properties of asphalt concrete mixtures; investigate the effect of bitumen content and different aggregate gradations on the durability potential of bituminous mixtures.

  1. Tutorial for mixture-process experiments with an industrial application

    Directory of Open Access Journals (Sweden)

    Luiz Henrique Abreu Dal Bello

    2011-12-01

    Full Text Available This article presents a tutorial on mixture-process experiments and a case study of a chemical compound used in the delay mechanism for starting a rocket engine. The compound consists in a three-component mixture. Besides the mixture components, two process variables are considered. For the model selection, the use of an information criterion showed to be efficient in the case under study. A linear regression model was fitted. Through the developed model, the optimal proportions of the mixture components and the levels of the process variables were determined.

  2. Designing optimal mixtures using generalized disjunctive programming: Hull relaxations

    OpenAIRE

    Jonuzaj, S; Adjiman, CSJ

    2016-01-01

    A general modeling framework for mixture design problems, which integrates Generalized Disjunctive Programming (GDP) into the Computer-Aided Mixture/blend Design (CAMbD) framework, was recently proposed (S. Jonuzaj, P.T. Akula, P.-M. Kleniati, C.S. Adjiman, 2016. AIChE Journal 62, 1616???1633). In this paper we derive Hull Relaxations (HR) of GDP mixture design problems as an alternative to the big-M (BM) approach presented in this earlier work. We show that in restricted mixture design probl...

  3. [Construction of Three-Dimensional Isobologram for Ternary Pollutant Mixtures].

    Science.gov (United States)

    2015-12-01

    Tongji University, Shanghai 200092, China) Isobolographic analysis was widely used in the interaction assessment of binary mixtures. However, how to construct a three-dimensional (3D) isobologram for the assessment of toxicity interaction within ternary mixtures is still not reported up to date. The main purpose of this paper is to develop a 3D isobologram where the relative concentrations of three components are acted as three coordinate axes in 3D space to examine the toxicity interaction within ternary mixtures. Taking six commonly used pesticides in China, including three herbicides (2, 4-D, desmetryne and simetryn) and three insecticides ( dimethoate, imidacloprid and propoxur) as the mixture components, the uniform design ray procedure (UD-Ray) was used to rationally design the concentration composition of various components in the ternary mixtures so that effectively and comprehensively reflected the variety of actual environmental concentrations. The luminescent inhibition toxicities of single pesticides and their ternary mixtures to Vibrio fischeri at various concentration levels were determined by the microplate toxicity analysis. Selecting concentration addition (CA) as the addition reference, 3D isobolograms were constructed to study the toxicity interactions of various ternary mixtures. The results showed that the 3D isobologram could clearly and directly exhibit the toxicity interactions of ternary mixtures, and extend the use of isobolographic analysis into the ternary mixtures.

  4. Communication: Modeling electrolyte mixtures with concentration dependent dielectric permittivity

    Science.gov (United States)

    Chen, Hsieh; Panagiotopoulos, Athanassios Z.

    2018-01-01

    We report a new implicit-solvent simulation model for electrolyte mixtures based on the concept of concentration dependent dielectric permittivity. A combining rule is found to predict the dielectric permittivity of electrolyte mixtures based on the experimentally measured dielectric permittivity for pure electrolytes as well as the mole fractions of the electrolytes in mixtures. Using grand canonical Monte Carlo simulations, we demonstrate that this approach allows us to accurately reproduce the mean ionic activity coefficients of NaCl in NaCl-CaCl2 mixtures at ionic strengths up to I = 3M. These results are important for thermodynamic studies of geologically relevant brines and physiological fluids.

  5. Initiation of explosive mixtures having multi-sized structures

    Science.gov (United States)

    Vasil'ev, A. A.; Vasiliev, V. A.; Trotsyuk, A. V.

    2016-10-01

    Theory of strong blast was used as the basis for the experimental method of determining of the energy of source which provides the initiation of combustible mixture. For mono-fuel mixtures the following parameters were experimentally determined at testing: the critical initiation energy of a cylindrical detonation wave in mixtures 2H2+O2 and C2H2+2.5O2 (exploding wire); the critical initiation energy of a spherical detonation in a mixture of C2H2+2.5O2 (electrical discharge). Similarly, for the double-fuel mixtures of acetylene - nitrous oxide - oxygen (having bifurcation cellular structures) the critical initiation energy of spherical wave was determined also. It was found that for the stoichiometric mixture on both fuel components the critical energy of mixture with the bifurcation structure was undervalued by several times in comparison with the value of the critical energy for the mono-fuel mixture, in which the cell size at a given pressure is determined by the large scale of bifurcation cells. This result shows the decrease of the critical energy with an increase of the number of "hot spots", which are the numerous areas of collision of the transverse waves of large and small scales in a mixture with bifurcation properties.

  6. Effect of Mixture Pressure and Equivalence Ratio on Detonation Cell Size for Hydrogen-Air Mixtures

    Science.gov (United States)

    2015-06-01

    mixture pressure detonation cell sizes are important for scaling the combustion chambers, and before this research no data existed for hydrogen and air...Introduction General Issue Pressure gain combustors have the potential to replace traditional combustions systems in gas turbine engines (Tellefsen et al... combustion has not been fully incorporated into turbine engines. In order to fully integrate RDEs into turbine engines, RDEs must be able to function

  7. Two-fluid theory and thermodynamic properties of liquid mixtures: Application to simple mixtures of nonelectrolytes.

    Science.gov (United States)

    Brandani, V; Prausnitz, J M

    1982-09-01

    In this last of three articles describing a two-fluid theory of liquid mixtures, the important result is a derivation of local compositions to describe nonrandomness (clustering) of mixing. The model is applied to the system methane/tetrafluoromethane. Although it appears that the two-fluid theory with local compositions may provide an improvement over random-mixing theories, it is likely that the use of local compositions overestimates the effect of nonrandomness.

  8. mixsmsn: Fitting Finite Mixture of Scale Mixture of Skew-Normal Distributions

    Directory of Open Access Journals (Sweden)

    Marcos Oliveira Prates

    2013-09-01

    Full Text Available We present the R package mixsmsn, which implements routines for maximum likeli- hood estimation (via an expectation maximization EM-type algorithm in finite mixture models with components belonging to the class of scale mixtures of the skew-normal distribution, which we call the FMSMSN models. Both univariate and multivariate re- sponses are considered. It is possible to fix the number of components of the mixture to be fitted, but there exists an option that transfers this responsibility to an automated procedure, through the analysis of several models choice criteria. Plotting routines to generate histograms, plug-in densities and contour plots using the fitted models output are also available. The precision of the EM estimates can be evaluated through their esti- mated standard deviations, which can be obtained by the provision of an approximation of the associated information matrix for each particular model in the FMSMSN family. A function to generate artificial samples from several elements of the family is also supplied. Finally, two real data sets are analyzed in order to show the usefulness of the package.

  9. Realistic environmental mixtures of micropollutants in surface, drinking, and recycled water: herbicides dominate the mixture toxicity toward algae.

    Science.gov (United States)

    Tang, Janet Y M; Escher, Beate I

    2014-06-01

    Mixture toxicity studies with herbicides have focused on a few priority components that are most likely to cause environmental impacts, and experimental mixtures were often designed as equipotent mixtures; however, real-world mixtures are made up of chemicals with different modes of toxic action at arbitrary concentration ratios. The toxicological significance of environmentally realistic mixtures has only been scarcely studied. Few studies have simultaneously compared the mixture effect of water samples with designed reference mixtures comprised of the ratios of analytically detected concentrations in toxicity tests. In the present study, the authors address the effect of herbicides and other chemicals on inhibition of photosynthesis and algal growth rate. The authors tested water samples including secondary treated wastewater effluent, recycled water, drinking water, and storm water in the combined algae assay. The detected chemicals were mixed in the concentration ratios detected, and the biological effects of the water samples were compared with the designed mixtures of individual detected chemicals to quantify the fraction of effect caused by unknown chemicals. The results showed that herbicides dominated the algal toxicity in these environmentally realistic mixtures, and the contribution by the non-herbicides was negligible. A 2-stage model, which used concentration addition within the groups of herbicides and non-herbicides followed by the model of independent action to predict the mixture effect of the two groups, could predict the experimental mixture toxicity effectively, but the concentration addition model for herbicides was robust and sufficient for complex mixtures. Therefore, the authors used the bioanalytical equivalency concept to derive effect-based trigger values for algal toxicity for monitoring water quality in recycled and surface water. All water samples tested would be compliant with the proposed trigger values associated with the

  10. Porous concrete mixtures for pervious urban pavements

    Directory of Open Access Journals (Sweden)

    Castro, J.

    2007-08-01

    Full Text Available The present study aimed to analyze the hydraulic and mechanical behaviour of a series of roller-compacted, laboratory porous concrete mixtures. The mix design variables examined were the actual void ratio in the hardened concrete and the water/cement ratio. From these results the better dosages from the mechanical and hydraulical behaviour point of view were determined. One of the designs developed was found to exhibit excellent hydraulic capacity and 20% greater strength than the mixtures recommended in the literature. Moreover, concrete with an actual void ratio of only 14% was observed to meet permeability requirements. Maximum flexural strength of concretes with different w/c ratios was achieved with a cement paste content of 250 l/m3. Relationships were found between the void ratio and both 28-day concrete permeability and flexural strength. Finally, the doses exhibiting the best mechanical and hydraulic performance were identified.El trabajo realizado en este estudio consistió en analizar el comportamiento de diferentes dosificaciones de mezclas de hormigón poroso, fabricadas en laboratorio y compactadas con rodillo pesado para simular las condiciones de terreno. Las variables consideradas para el diseño de las mezclas fueron el porcentaje real de huecos en el hormigón endurecido y la razón agua/cemento. A partir de estos resultados se determinaron las dosificaciones que presentan mejor comportamiento desde el punto de vista mecánico e hidráulico. Los resultados muestran que existe una dosificación de hormigón poroso, distinta a las encontradas actualmente en la literatura internacional, que permite obtener resistencias hasta 20% más altas, manteniendo todavía una excelente capacidad hidráulica. Se determinó que una permeabilidad suficiente se puede obtener con un porcentaje real de huecos de 14%, y que agregar pasta de cemento en una proporción de 250 l/m3 permite maximizar la resistencia a flexotracción de hormigones que

  11. Compendium of shock wave data. Section C. Organic compounds excluding hydrocarbons. Section D. Mixtures. Section E. Mixtures and solutions without chemical characterization. Compendium index

    International Nuclear Information System (INIS)

    van Thiel, M.; shaner, J.; Salinas, E.

    1977-06-01

    This volume lists thermodynamic data for organic compounds excluding hydrocarbons, mixtures, and mixtures and solutions without chemical characterization. Alloys and some minerals are included among the mixtures. This volume also contains the index for the three-volume compendium

  12. An Equiratio Mixture Model for non-additive components: a case study for aspartame/acesulfame-K mixtures.

    Science.gov (United States)

    Schifferstein, H N

    1996-02-01

    The Equiratio Mixture Model predicts the psychophysical function for an equiratio mixture type on the basis of the psychophysical functions for the unmixed components. The model reliably estimates the sweetness of mixtures of sugars and sugar-alcohols, but is unable to predict intensity for aspartame/sucrose mixtures. In this paper, the sweetness of aspartame/acesulfame-K mixtures in aqueous and acidic solutions is investigated. These two intensive sweeteners probably do not comply with the model's original assumption of sensory dependency among components. However, they reveal how the Equiratio Mixture Model could be modified to describe and predict mixture functions for non-additive substances. To predict equiratio functions for all similar tasting substances, a new Equiratio Mixture Model should yield accurate predictions for components eliciting similar intensities at widely differing concentration levels, and for substances exhibiting hypo- or hyperadditivity. In addition, it should be able to correct violations of Stevens's power law. These three problems are resolved in a model that uses equi-intense units as the measure of physical concentration. An interaction index in the formula for the constant accounts for the degree of interaction between mixture components. Deviations from the power law are corrected by a nonlinear response output transformation, assuming a two-stage model of psychophysical judgment.

  13. Nonparametric Mixture Models for Supervised Image Parcellation.

    Science.gov (United States)

    Sabuncu, Mert R; Yeo, B T Thomas; Van Leemput, Koen; Fischl, Bruce; Golland, Polina

    2009-09-01

    We present a nonparametric, probabilistic mixture model for the supervised parcellation of images. The proposed model yields segmentation algorithms conceptually similar to the recently developed label fusion methods, which register a new image with each training image separately. Segmentation is achieved via the fusion of transferred manual labels. We show that in our framework various settings of a model parameter yield algorithms that use image intensity information differently in determining the weight of a training subject during fusion. One particular setting computes a single, global weight per training subject, whereas another setting uses locally varying weights when fusing the training data. The proposed nonparametric parcellation approach capitalizes on recently developed fast and robust pairwise image alignment tools. The use of multiple registrations allows the algorithm to be robust to occasional registration failures. We report experiments on 39 volumetric brain MRI scans with expert manual labels for the white matter, cerebral cortex, ventricles and subcortical structures. The results demonstrate that the proposed nonparametric segmentation framework yields significantly better segmentation than state-of-the-art algorithms.

  14. Electrical properties of methane hydrate + sediment mixtures

    Science.gov (United States)

    Du Frane, Wyatt L.; Stern, Laura A.; Weitemeyer, Karen A.; Constable, Steven; Roberts, Jeffery J.

    2011-01-01

    As part of our DOE-funded proposal to characterize gas hydrate in the Gulf of Mexico using marine electromagnetic methods, a collaboration between SIO, LLNL, and USGS with the goal of measuring the electrical properties of lab-created methane (CH4) hydrate and sediment mixtures was formed. We examined samples with known characteristics to better relate electrical properties measured in the field to specific gas hydrate concentration and distribution patterns. Here we discuss first-ever electrical conductivity (σ) measurements on unmixed CH4 hydrate (Du Frane et al., 2011): 6 x 10-5 S/m at 5 °C, which is ~5 orders of magnitude lower than seawater. This difference allows electromagnetic (EM) techniques to distinguish highly resistive gas hydrate deposits from conductive water saturated sediments in EM field surveys. More recently, we performed measurements on CH4 hydrate mixed with sediment and we also discuss those initial findings here. Our results on samples free of liquid water are important for predicting conductivity of sediments with pores highly saturated with gas hydrate, and are an essential starting point for comprehensive mixing models.

  15. A Gaussian Mixture Model for Nulling Pulsars

    Science.gov (United States)

    Kaplan, D. L.; Swiggum, J. K.; Fichtenbauer, T. D. J.; Vallisneri, M.

    2018-03-01

    The phenomenon of pulsar nulling—where pulsars occasionally turn off for one or more pulses—provides insight into pulsar-emission mechanisms and the processes by which pulsars turn off when they cross the “death line.” However, while ever more pulsars are found that exhibit nulling behavior, the statistical techniques used to measure nulling are biased, with limited utility and precision. In this paper, we introduce an improved algorithm, based on Gaussian mixture models, for measuring pulsar nulling behavior. We demonstrate this algorithm on a number of pulsars observed as part of a larger sample of nulling pulsars, and show that it performs considerably better than existing techniques, yielding better precision and no bias. We further validate our algorithm on simulated data. Our algorithm is widely applicable to a large number of pulsars even if they do not show obvious nulls. Moreover, it can be used to derive nulling probabilities of nulling for individual pulses, which can be used for in-depth studies.

  16. Hydrodynamic 'memory' of binary fluid mixtures

    International Nuclear Information System (INIS)

    Kalashnik, M. V.; Ingel, L. Kh.

    2006-01-01

    A theoretical analysis is presented of hydrostatic adjustment in a two-component fluid system, such as seawater stratified with respect to temperature and salinity. Both linear approximation and nonlinear problem are investigated. It is shown that scenarios of relaxation to a hydrostatically balanced state in binary fluid mixtures may substantially differ from hydrostatic adjustment in fluids that can be stratified only with respect to temperature. In particular, inviscid two-component fluids have 'memory': a horizontally nonuniform disturbance in the initial temperature or salinity distribution does not vanish even at the final stage, transforming into a persistent thermohaline 'trace.' Despite stability of density stratification and convective stability of the fluid system by all known criteria, an initial temperature disturbance may not decay and may even increase in amplitude. Moreover, its sign may change (depending on the relative contributions of temperature and salinity to stable background density stratification). Hydrostatic adjustment may involve development of discontinuous distributions from smooth initial temperature or concentration distributions. These properties of two-component fluids explain, in particular, the occurrence of persistent horizontally or vertically nonuniform temperature and salinity distributions in the ocean, including discontinuous ones

  17. Ultrasonic study of molecular interaction in binary liquid mixtures at ...

    Indian Academy of Sciences (India)

    The variation of these parameters with composition of the mixture helps us in understanding the nature and extent of interaction between unlike molecules in the mixtures. Further, theoretical values of ultrasonic speed were evaluated using theories and empirical relations. The relative merits of these theories and relations ...

  18. Radiation-polymerizable mixture and recording material containing it

    International Nuclear Information System (INIS)

    Gersdorf, J.; Kleiner, H-J.

    1991-01-01

    Esters of dihydric alcohols with alkenylphosphonic or alkenylphosphinic acids which are polymerizable by free radicals are described. They are combined with polymer binders, in particular water-soluble polymers, and photoinitiators forming free radicals to give photopolymerizable mixtures which are suitable for the production of photoresists and printing plates. The mixtures display low heat-sensitivity and have long shelf lives. (author) 1 tab

  19. Evaluating Mixture Modeling for Clustering: Recommendations and Cautions

    Science.gov (United States)

    Steinley, Douglas; Brusco, Michael J.

    2011-01-01

    This article provides a large-scale investigation into several of the properties of mixture-model clustering techniques (also referred to as latent class cluster analysis, latent profile analysis, model-based clustering, probabilistic clustering, Bayesian classification, unsupervised learning, and finite mixture models; see Vermunt & Magdison,…

  20. Using Mixture of Gaussians to Compare Approaches to Signal Separation

    DEFF Research Database (Denmark)

    Petersen, Kaare Brandt

    2004-01-01

    is an example of how such different approaches to separation can be compared using Mixtures of Gaussians as a prior distribution. This not only illuminates some interesting properties of Maximum Likelihood and Energy Based Models, but is also an example of how Mixtures of Gaussians can serve as a both flexible...

  1. Generalized Stacy-Lindley mixture distribution | Maya | Afrika Statistika

    African Journals Online (AJOL)

    In this paper, we introduce a five parameter extension of mixture of two Stacy gamma distributions called generalized Stacy- Lindley mixture distribution. Several statistical properties are derived. Two types of estimation techniques are used for estimating the parameters. Asymptotic confidence interval is also calculated for ...

  2. Dielectric relaxation studies of aqueous sucrose in ethanol mixtures ...

    Indian Academy of Sciences (India)

    done on alcohol-water mixture [9-19] because this system has interesting behaviour with reference to hydrogen bonding. Mashimo et al [13] gave dielectric relaxation parameters of mixtures of water and primary alcohols over a frequency range of 10. MHz to 15 GHz using time domain reflectometry (TDR) technique at 25.

  3. Microwave dielectric characterization of binary mixture of formamide ...

    Indian Academy of Sciences (India)

    Dielectric relaxation measurements of formamide (FMD)–,- dimethylaminoethanol (DMAE) solvent mixtures have been carried out over the entire concentration range using time domain reflectometry technique at 25, 35 and 45° C in thefrequency range of 10 MHz to 20 GHz. The mixtures exhibit a principle dispersion of ...

  4. Phase separation in binary hard-core mixtures

    NARCIS (Netherlands)

    Dijkstra, Marjolein; Frenkel, D.; Hansen, J.-P.

    1994-01-01

    We report the observation of a purely entropic demixing transition in a three-dimensional binary hard-core mixture by computer simulations. This transition is observed in a lattice model of a binary hard-core mixture of parallel cubes provided that the size asymmetry of the large and small particles

  5. Mixture optimization for mixed gas Joule-Thomson cycle

    Science.gov (United States)

    Detlor, J.; Pfotenhauer, J.; Nellis, G.

    2017-12-01

    An appropriate gas mixture can provide lower temperatures and higher cooling power when used in a Joule-Thomson (JT) cycle than is possible with a pure fluid. However, selecting gas mixtures to meet specific cooling loads and cycle parameters is a challenging design problem. This study focuses on the development of a computational tool to optimize gas mixture compositions for specific operating parameters. This study expands on prior research by exploring higher heat rejection temperatures and lower pressure ratios. A mixture optimization model has been developed which determines an optimal three-component mixture based on the analysis of the maximum value of the minimum value of isothermal enthalpy change, ΔhT , that occurs over the temperature range. This allows optimal mixture compositions to be determined for a mixed gas JT system with load temperatures down to 110 K and supply temperatures above room temperature for pressure ratios as small as 3:1. The mixture optimization model has been paired with a separate evaluation of the percent of the heat exchanger that exists in a two-phase range in order to begin the process of selecting a mixture for experimental investigation.

  6. DESIGNS FOR MIXTURE AND PROCESS VARIABLES APPLIED IN TABLET FORMULATIONS

    NARCIS (Netherlands)

    DUINEVELD, C. A. A.; Smilde, A. K.; Doornbos, D. A.

    1993-01-01

    Although there are several methods for the construction of a design for process variables and mixture variables, there are not very many methods which are suitable to combine mixture and process variables in one design. Some of the methods which are feasible will be shown. These methods will be

  7. Cumulative effects of anti-androgenic chemical mixtures and ...

    Science.gov (United States)

    Kembra L. Howdeshell and L. Earl Gray, Jr.Toxicological studies of defined chemical mixtures assist human health risk assessment by characterizing the joint action of chemicals. This presentation will review the effects of anti-androgenic chemical mixtures on reproductive tract development in rats with a special focus on the reproductive toxicant phthalates. Observed mixture data are compared to mathematical mixture model predictions to determine how the individual chemicals in a mixture interact (e.g., response addition – probabilities of response for each individual chemical are added; dose-addition – the doses of each individual chemical at a given mixture dose are combined together based on the relative potency of the individual chemicals). Phthalate mixtures are observed to act in a dose-additive manner based on the relative potency of the individual phthalates to suppress fetal testosterone production. Similar dose-additive effects have been reported for mixtures of phthalates with anti-androgenic pesticides of differing mechanisms. Data from these phthalate experiments in rats can be used in conjunction with human biomonitoring data to determine individual hazard ratios. Furthermore, data from the toxicological studies can inform the analysis of human biomonitoring data on the association of detected chemicals and their metabolites with measured health outcomes. Data from phthalate experiments in rats can be used in conjunction with human biomonit

  8. 40 CFR Table 9 to Part 455 - Group 2 Mixtures

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Group 2 Mixtures 9 Table 9 to Part 455 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Pt. 455, Table 9 Table 9 to Part 455—Group 2 Mixtures Shaughnessey code Chemical name 1...

  9. Thermodynamic study of (anthracene + phenanthrene) solid state mixtures.

    Science.gov (United States)

    Rice, James W; Fu, Jinxia; Sandström, Emma; Ditto, Jenna C; Suuberg, Eric M

    2015-11-01

    Polycyclic aromatic hydrocarbons (PAH) are common components of many materials, such as petroleum and various types of tars. They are generally present in mixtures, occurring both naturally and as byproducts of fuel processing operations. It is important to understand the thermodynamic properties of such mixtures in order to understand better and predict their behavior ( i.e. , fate and transport) in the environment and in industrial operations. To characterize better the thermodynamic behavior of PAH mixtures, the phase behavior of a binary (anthracene + phenanthrene) system was studied by differential scanning calorimetry, X-ray diffraction, and the Knudsen effusion technique. Mixtures of (anthracene + phenanthrene) exhibit non-ideal mixture behavior. They form a lower-melting, phenanthrene-rich phase with an initial melting temperature of 372 K (identical to the melting temperature of pure phenanthrene) and a vapor pressure of roughly ln P /Pa = -2.38. The phenanthrene-rich phase coexists with an anthracene-rich phase when the mole fraction of phenanthrene ( x P ) in the mixture is less than or equal to 0.80. Mixtures initially at x P = 0.90 consist entirely of the phenanthrene-rich phase and sublime at nearly constant vapor pressure and composition, consistent with azeotrope-like behavior. Quasi-azeotropy was also observed for very high-content anthracene mixtures (2.5 < x P < 5) indicating that anthracene may accommodate very low levels of phenanthrene in its crystal structure.

  10. A suggestion for planning cover crop mixtures: zones of occupancy

    Science.gov (United States)

    Producers may be able to improve the competitiveness of cover crop mixtures by selecting species to occupy zones in the cover crop canopy. This suggestion is based on a study where we compared four cover crop treatments, 1, 3, 6, and 9 species mixtures, for biomass production. Treatments were est...

  11. Evaluation of open graded friction course (OGFC) mixtures.

    Science.gov (United States)

    2013-10-01

    Louisiana Department of Transportation and Development (LADOTD) began the development of Open-Graded : Friction Course (OGFC) mixtures in the late 1960s and early 1970s. In the early 1980s, a moratorium was : imposed on the use of OGFC mixtures due t...

  12. Evaluation of open graded friction course (OGFC) mixtures : [tech summary].

    Science.gov (United States)

    2013-10-01

    Louisiana Department of Transportation and Development (LADOTD) began the development of Open-Graded Friction : Course (OGFC) mixtures in the late 1960s and early 1970s. In the early 1980s, a moratorium was imposed on the use : of OGFC mixtures due t...

  13. Widom Lines in Binary Mixtures of Supercritical Fluids.

    Science.gov (United States)

    Raju, Muralikrishna; Banuti, Daniel T; Ma, Peter C; Ihme, Matthias

    2017-06-08

    Recent experiments on pure fluids have identified distinct liquid-like and gas-like regimes even under supercritical conditions. The supercritical liquid-gas transition is marked by maxima in response functions that define a line emanating from the critical point, referred to as Widom line. However, the structure of analogous state transitions in mixtures of supercritical fluids has not been determined, and it is not clear whether a Widom line can be identified for binary mixtures. Here, we present first evidence for the existence of multiple Widom lines in binary mixtures from molecular dynamics simulations. By considering mixtures of noble gases, we show that, depending on the phase behavior, mixtures transition from a liquid-like to a gas-like regime via distinctly different pathways, leading to phase relationships of surprising complexity and variety. Specifically, we show that miscible binary mixtures have behavior analogous to a pure fluid and the supercritical state space is characterized by a single liquid-gas transition. In contrast, immiscible binary mixture undergo a phase separation in which the clusters transition separately at different temperatures, resulting in multiple distinct Widom lines. The presence of this unique transition behavior emphasizes the complexity of the supercritical state to be expected in high-order mixtures of practical relevance.

  14. Band-in-band segregation of multidisperse granular mixtures

    NARCIS (Netherlands)

    Newey, M.; Ozik, J.; van der Meer, S.M.

    2004-01-01

    Radial and axial segregation is investigated experimentally in polydisperse mixtures of granular materials rotated in a long, partly filled, horizontal cylinder. Radial segregation by size is observed in all polydisperse mixtures. Axial segregation, with smaller-size particles forming bands within

  15. Research note : Miscibility behaviour of binary mixtures of benzyl ...

    African Journals Online (AJOL)

    Miscibility of binary mixtures of benzyl benzoate and liquid paraffin as functions of temperature and composition has been determined using phase separation method. The binary mixtures demonstrated a critical (upper) solution temperature of 35 °C at 101325 Nm-2 with a mixing gap. A tie-line drawn at 28 °C across the ...

  16. Binary mixtures of carbon dioxide and dimethyl ether as alternative ...

    African Journals Online (AJOL)

    Vapor-liquid equilibrium (VLE) data were predicted for the binary mixture of carbon dioxide (CO2) and dimethyl ether (DME) at ten temperatures ranging from 273.15 to 386.56 K and pressure upto 7.9 MPa to observe this mixture's potential of COP enhancement and capacity modulation as a working fluid in a refrigeration ...

  17. Quantitative measurement of mixtures by terahertz time–domain ...

    Indian Academy of Sciences (India)

    Administrator

    earth and space science, quality control of food and agricultural products and global environmental monitoring. In quantitative applications, terahertz technology has been widely used for studying dif- ferent kinds of mixtures, such as amino acids,. 8 ter- nary chemical mixtures,. 9 pharmaceuticals,. 10 racemic compounds. 11.

  18. Asymmetric borane reduction using mixtures of homochiral amino alcohol ligands

    NARCIS (Netherlands)

    Kaptein, Bernard; Elsenberg, Henk; Minnaard, Adriaan J.; Broxterman, Quirinus B.; Hulshof, Lumbertus A.; Vries, Ton R.

    1999-01-01

    The asymmetric borane reduction of acetophenone is investigated using mixtures of homochiral β-amino alcohol ligands. With stoichiometric amounts of a mixture of two- or three-amino alcohols, the e.e. remains at the level of the best amino alcohol for a wide composition range. A small but

  19. Separation of organic azeotropic mixtures by pervaporation. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.W.

    1991-12-01

    Distillation is a commonly used separation technique in the petroleum refining and chemical processing industries. However, there are a number of potential separations involving azetropic and close-boiling organic mixtures that cannot be separated efficiently by distillation. Pervaporation is a membrane-based process that uses selective permeation through membranes to separate liquid mixtures. Because the separation process is not affected by the relative volatility of the mixture components being separated, pervaporation can be used to separate azetropes and close-boiling mixtures. Our results showed that pervaporation membranes can be used to separate azeotropic mixtures efficiently, a result that is not achievable with simple distillation. The membranes were 5--10 times more permeable to one of the components of the mixture, concentrating it in the permeate stream. For example, the membrane was 10 times more permeable to ethanol than methyl ethyl ketone, producing 60% ethanol permeate from an azeotropic mixture of ethanol and methyl ethyl ketone containing 18% ethanol. For the ethyl acetate/water mixture, the membranes showed a very high selectivity to water (> 300) and the permeate was 50--100 times enriched in water relative to the feed. The membranes had permeate fluxes on the order of 0.1--1 kg/m{sup 2}{center_dot}h in the operating range of 55--70{degrees}C. Higher fluxes were obtained by increasing the operating temperature.

  20. Mechanistic and Economical Characteristics of Asphalt Rubber Mixtures

    Directory of Open Access Journals (Sweden)

    Mena I. Souliman

    2016-01-01

    Full Text Available Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Rubber- (AR- gap-graded mixtures to investigate the impact of added rubber on the mechanical, mechanistic, and economical attributes of asphaltic mixtures. Strain controlled fatigue tests were conducted according to American Association of State Highway and Transportation Officials (AASHTO procedures. The results from the beam fatigue tests indicated that the AR-gap-graded mixtures would have much longer fatigue life compared with the reference (conventional mixtures. In addition, a mechanistic analysis using 3D-Move software coupled with a cost analysis study based on the fatigue performance on the two mixtures was performed. Overall, analysis showed that AR modified asphalt mixtures exhibited significantly lower cost of pavement per 1000 cycles of fatigue life per mile compared to conventional HMA mixture.

  1. A Multilevel Mixture IRT Model with an Application to DIF

    Science.gov (United States)

    Cho, Sun-Joo; Cohen, Allan S.

    2010-01-01

    Mixture item response theory models have been suggested as a potentially useful methodology for identifying latent groups formed along secondary, possibly nuisance dimensions. In this article, we describe a multilevel mixture item response theory (IRT) model (MMixIRTM) that allows for the possibility that this nuisance dimensionality may function…

  2. Self-consistent calculation of atomic structure for mixture

    International Nuclear Information System (INIS)

    Meng Xujun; Bai Yun; Sun Yongsheng; Zhang Jinglin; Zong Xiaoping

    2000-01-01

    Based on relativistic Hartree-Fock-Slater self-consistent average atomic model, atomic structure for mixture is studied by summing up component volumes in mixture. Algorithmic procedure for solving both the group of Thomas-Fermi equations and the self-consistent atomic structure is presented in detail, and, some numerical results are discussed

  3. Structural and Physical Properties of Ionic Liquid Mixtures

    Science.gov (United States)

    Cha, Seoncheol; Kim, Doseok

    Ionic liquids are the materials consisting of only cations and anions and existing at liquid phase below 100 °C. They are called designer solven as the physical properties of the materials can be tuned by changing their constituent ions. Mixing ionic liquids is a new way of maximizing this advantage because the material properties can be changed continuously in the mixture. The excess molar volumes, a difference between the molar volumes of the mixtures and a linear interpolation between the volumes of pure components, have been found to differ significantly for some ionic liquid mixtures, but the origin of this difference is not well understood. The different microstructures of the mixtures, which can range from a simple mixture of two different consisting ionic liquids to a different structure from those of pure materials, have been suggested as the origin of this difference. We investigated ionic liquid mixture systems by IR spectroscopy by utilizing a particular peak in the IR spectrum for the moiety participating in the hydrogen bonding (νC(2)-H) that changes sensitively with the change of the anion in the ionic liquid. The absorbance of νC(2)-H changed proportionally to the composition for the mixtures consisting of halide anion. By contrast, the absorbance changed nonlinearly for the mixtures of which one of the anion had multiple interaction sites

  4. Liquid crystalline behaviour of mixtures of structurally dissimilar ...

    Indian Academy of Sciences (India)

    Unknown

    Physical properties of individual mesogens may or may not undergo modifications in their mixtures. Sometimes, the modifications become characteristic thereby making the study of mixtures important. Earlier studies1–10 have suggested the formation of mixed mesomorphism by mixing compounds where none, one or both ...

  5. Herbal mixtures in the traditional medicine of Eastern Cuba

    NARCIS (Netherlands)

    Hernández, J.; Volpato, G.

    2004-01-01

    Herbal mixtures in the traditional medicine of Eastern Cuba. Traditional herbal mixtures in Eastern Cuba are investigated through interviews with 130 knowledgeable people and traditional healers of the provinces of Santiago de Cuba and Guantanamo. One hundred seventy plant species and other products

  6. Ultrasonic study of molecular interaction in binary liquid mixtures at ...

    Indian Academy of Sciences (India)

    physics pp. 695–701. Ultrasonic study of molecular interaction in binary liquid mixtures at 30 о. C. A ALI and A K NAIN. Department of Chemistry, Jamia Millia ... The variation of these parameters with composition of the mixture helps ... AR grade, 99.5 and 99.0%, respectively) were purified by standard procedure [11]. The.

  7. Learning Mixtures of Polynomials of Conditional Densities from Data

    DEFF Research Database (Denmark)

    L. López-Cruz, Pedro; Nielsen, Thomas Dyhre; Bielza, Concha

    2013-01-01

    Mixtures of polynomials (MoPs) are a non-parametric density estimation technique for hybrid Bayesian networks with continuous and discrete variables. We propose two methods for learning MoP ap- proximations of conditional densities from data. Both approaches are based on learning MoP approximations......- ods with the approach for learning mixtures of truncated basis functions from data....

  8. Effects of dietary supplementation of Chinese herb medicine mixture ...

    African Journals Online (AJOL)

    Effects of dietary supplementation of Chinese herb medicine mixture on rumen fermentation, nutrient digestion and blood profile in goats. ... improving the functions of immunity and antioxidation, as well as the digestion and metabolism of nutrients. However, the CHM mixture did not affect their rumen fermentation patterns.

  9. Quantitative measurement of mixtures by terahertz time-domain ...

    Indian Academy of Sciences (India)

    ... absorption coefficients of the components in each mixture were linearly proportional to their concentrations in the mixture. The results from analysis were in agreement with actual values with a relative error of less than 7%. The quantitative method will help in the detection of illegal drugs, poisons and dangerous materials ...

  10. Moisture sorption in mixtures of biopolymer, disaccharides and water

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2013-01-01

    The moisture sorption of ternary mixtures of biopolymer, sugar and water is investigated by means of the Free-Volume-Flory-Huggins (FVFH) theory. The earlier FVFH theory developed for binary mixtures of biopolymer/water and sugar/water has to be modified to account for two effects: 1) the change in

  11. Shock Compression of Cryogenic Noble Gas Mixtures: Xenon - Krypton

    Science.gov (United States)

    Root, Seth; Magyar, Rudolph; Lemke, Raymond; Mattsson, Thomas

    2013-06-01

    In past work, we have examined the multi-Mbar response of cryogenically cooled liquid xenon and liquid krypton measuring their Hugoniots to 8 Mbar. These results were utilized in the development of new EOS models for Xe and Kr to use in high energy density physics applications. The previous work demonstrated the usefulness of integrating high accuracy shock compression experiments with DFT to generate the basis for equation of state (EOS) models. In many physics applications, such as Z-pinch experiments, gas mixtures are used instead. However, we do not have reliable experimental data on these mixtures to provide informed decisions about the EOS models or mixture rules. To improve our understanding of mixtures at extreme conditions, we performed dynamic compression experiments using Sandia's Z - facility on a 70/30 molar ratio Kr/Xe cryogenically cooled liquid mixture. We measured the Hugoniot state and reshock state of the liquid mixture to several Mbar. The experimental data validated the DFT simulations for identical molar ratio mixtures. The combined experimental and DFT results are used to assess the EOS models and test the mixture rules. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Securities Administration under Contract No. DE-AC04-94AL85000.

  12. Criticality of mixtures of plutonium and high enriched uranium

    International Nuclear Information System (INIS)

    Grolleau, E.; Lein, M.; Leka, G.; Maidou, B.; Klenov, P.

    2003-01-01

    This paper presents a criticality evaluation of moderated homogeneous plutonium-uranium mixtures. The fissile media studied are homogeneous mixtures of plutonium and high enriched uranium in two chemical forms: aqueous mixtures of metal and mixtures of nitrate solutions. The enrichment of uranium considered are 93.2wt.% 235 U and 100wt.% 235 U. The 240 Pu content in plutonium varies from 0wt.% 240 Pu to 12wt.% 240 Pu. The critical parameters (radii and masses of a 20 cm water reflected sphere) are calculated with the French criticality safety package CRISTAL V0. The comparison of the calculated critical parameters as a function of the moderator-to-fuel atomic ratio shows significant ranges in which high enriched uranium systems, as well as plutonium-uranium mixtures, are more reactive than plutonium systems. (author)

  13. Combustion of soybean oil and diesel mixtures for heating purposes

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Adriana Correa; Sanz, Jose Francisco [European University Miguel de Cervantes, Valladolid (Spain)], E-mail: acorrea@uemc.es; Hernandez, Salvador; Navas, Luis Manuel; Rodriguez, Elena; Ruiz, Gonzalo [University of Valladolid (Spain). Dept. of Agricultural and Forest Engineering; San Jose, Julio [University of Valladolid (Spain). Dept. of Energetic Engineering; Gomez, Jaime [University of Valladolid (Spain). Dept. of Communications and Signal Theory and Telematics Engineering

    2008-07-01

    Using blends of vegetable oils with petroleum derivates for heating purposes has several advantages over other energy application for vegetable oils. This paper presents the results of an investigation by use of soybean oil and diesel mixture as fuel for producing heat in conventional diesel installation. The paper is set out as follows: properties characterization of soybean oil as fuel and of diesel oil, as well as the mixture of both; selection of the mixture according to their physical chemical properties and how they adapt to conventional combustion installation; experimentation with the selected mixture, allowing the main combustion parameters to be measured; processing the collected data, values of combustion, efficiency and reduction of emissions. Conclusions show that the use of soybean oil and diesel mixture for producing heat energy in conventional equipment is feasible and beneficial for reduction emissions. (author)

  14. High density thermite mixture for shaped charge ordnance disposal

    Directory of Open Access Journals (Sweden)

    Tamer Elshenawy

    2017-10-01

    Full Text Available The effect of thermite mixture based on aluminum and ferric oxides for ammunition neutralization has been studied and tested. Thermochemical calculations have been carried out for different percentage of Al using Chemical Equilibrium Code to expect the highest performance thermite mixture used for shaped charge ordnance disposal. Densities and enthalpy of different formulations have been calculated and demonstrated. The optimized thermite formulation has been prepared experimentally using cold iso-static pressing technique, which exhibited relatively high density and high burning rate thermite mixture. The produced green product compacted powder mixture was tested against small caliber shaped charge bomblet for neutralization. Theoretical and experimental results showed that the prepared thermite mixture containing 33% of aluminum as a fuel with ferric oxide can be successfully used for shaped charge ordnance disposal.

  15. IGNITION IMPROVEMENT OF LEAN NATURAL GAS MIXTURES

    Energy Technology Data Exchange (ETDEWEB)

    Jason M. Keith

    2005-02-01

    This report describes work performed during a thirty month project which involves the production of dimethyl ether (DME) on-site for use as an ignition-improving additive in a compression-ignition natural gas engine. A single cylinder spark ignition engine was converted to compression ignition operation. The engine was then fully instrumented with a cylinder pressure transducer, crank shaft position sensor, airflow meter, natural gas mass flow sensor, and an exhaust temperature sensor. Finally, the engine was interfaced with a control system for pilot injection of DME. The engine testing is currently in progress. In addition, a one-pass process to form DME from natural gas was simulated with chemical processing software. Natural gas is reformed to synthesis gas (a mixture of hydrogen and carbon monoxide), converted into methanol, and finally to DME in three steps. Of additional benefit to the internal combustion engine, the offgas from the pilot process can be mixed with the main natural gas charge and is expected to improve engine performance. Furthermore, a one-pass pilot facility was constructed to produce 3.7 liters/hour (0.98 gallons/hour) DME from methanol in order to characterize the effluent DME solution and determine suitability for engine use. Successful production of DME led to an economic estimate of completing a full natural gas-to-DME pilot process. Additional experimental work in constructing a synthesis gas to methanol reactor is in progress. The overall recommendation from this work is that natural gas to DME is not a suitable pathway to improved natural gas engine performance. The major reasons are difficulties in handling DME for pilot injection and the large capital costs associated with DME production from natural gas.

  16. Modeling Phase Equilibria for Acid Gas Mixtures Using the CPA Equation of State. I. Mixtures with H2S

    DEFF Research Database (Denmark)

    Tsivintzelis, Ioannis; Kontogeorgis, Georgios; Michelsen, Michael Locht

    2010-01-01

    The Cubic-Plus-Association (CPA) equation of state is applied to a large variety of mixtures containing H2S, which are of interest in the oil and gas industry. Binary H2S mixtures with alkanes, CO2, water, methanol, and glycols are first considered. The interactions of H2S with polar compounds...

  17. A Study on The Mixture of Exponentiated-Weibull Distribution

    Directory of Open Access Journals (Sweden)

    Adel Tawfik Elshahat

    2016-12-01

    Full Text Available Mixtures of measures or distributions occur frequently in the theory and applications of probability and statistics. In the simplest case it may, for example, be reasonable to assume that one is dealing with the mixture in given proportions of a finite number of normal populations with different means or variances. The mixture parameter may also be denumerable infinite, as in the theory of sums of a random number of random variables, or continuous, as in the compound Poisson distribution. The use of finite mixture distributions, to control for unobserved heterogeneity, has become increasingly popular among those estimating dynamic discrete choice models. One of the barriers to using mixture models is that parameters that could previously be estimated in stages must now be estimated jointly: using mixture distributions destroys any additive reparability of the log likelihood function. In this thesis, the maximum likelihood estimators have been obtained for the parameters of the mixture of exponentiated Weibull distribution when sample is available from censoring scheme. The maximum likelihood estimators of the parameters and the asymptotic variance covariance matrix have been also obtained. A numerical illustration for these new results is given.

  18. Poisson Mixture Regression Models for Heart Disease Prediction

    Science.gov (United States)

    Erol, Hamza

    2016-01-01

    Early heart disease control can be achieved by high disease prediction and diagnosis efficiency. This paper focuses on the use of model based clustering techniques to predict and diagnose heart disease via Poisson mixture regression models. Analysis and application of Poisson mixture regression models is here addressed under two different classes: standard and concomitant variable mixture regression models. Results show that a two-component concomitant variable Poisson mixture regression model predicts heart disease better than both the standard Poisson mixture regression model and the ordinary general linear Poisson regression model due to its low Bayesian Information Criteria value. Furthermore, a Zero Inflated Poisson Mixture Regression model turned out to be the best model for heart prediction over all models as it both clusters individuals into high or low risk category and predicts rate to heart disease componentwise given clusters available. It is deduced that heart disease prediction can be effectively done by identifying the major risks componentwise using Poisson mixture regression model. PMID:27999611

  19. Identification and evaluation of pyrethroid insecticide mixtures in urban sediments.

    Science.gov (United States)

    Trimble, Andrew J; Weston, Donald P; Belden, Jason B; Lydy, Michael J

    2009-08-01

    Organochlorine, organophosphorous, and pyrethroid insecticides frequently have been detected together as mixtures in stream sediments. To simplify mixture analyses, additive toxic responses usually are assumed but rarely are confirmed, especially for compounds with similar modes of action. The first objective of the present study was to screen a database of 24 different pesticides and 94 urban-stream sediment samples collected throughout central and northern California (USA) to identify compounds and partial mixtures that dominated sample toxicity to Hyalella azteca. Pyrethroids and chlorpyrifos were the most toxicologically relevant compounds in terms of detection frequency, contribution to overall sample toxicity, and co-occurrence in the most common mixture patterns. Organochlorine insecticides were the least toxicologically relevant compounds, with only a small percentage of samples exceeding predefined screening values. The second objective was to confirm that mixtures of type I and type II pyrethroids display additive responses. Ten-day sediment toxicity tests of binary pesticide mixtures were conducted using H. azteca as the test organism. Observed dose-response curves were compared to those predicted from concentration-addition and independent-action models. Model deviation ratios (MDRs) were calculated at the median effect level to quantify the magnitudes of deviation between observed and predicted curves. Whereas the concentration-addition model adequately predicted toxicity for all the pyrethroid mixtures (MDRs within a factor of two), dose-response values deviated from additivity enough to warrant further investigation.

  20. Treatment of synthetic textile wastewater containing dye mixtures with microcosms.

    Science.gov (United States)

    Yaseen, Dina A; Scholz, Miklas

    2018-01-01

    The aim was to assess the ability of microcosms (laboratory-scale shallow ponds) as a post polishing stage for the remediation of artificial textile wastewater comprising two commercial dyes (basic red 46 (BR46) and reactive blue 198 (RB198)) as a mixture. The objectives were to evaluate the impact of Lemna minor L. (common duckweed) on the water quality outflows; the elimination of dye mixtures, organic matter, and nutrients; and the impact of synthetic textile wastewater comprising dye mixtures on the L. minor plant growth. Three mixtures were prepared providing a total dye concentration of 10 mg/l. Findings showed that the planted simulated ponds possess a significant (p mixtures compared with the corresponding unplanted ponds. The removal of mixed dyes in planted ponds was mainly due to phyto-transformation and adsorption of BR46 with complete aromatic amine mineralisation. For ponds containing 2 mg/l of RB198 and 8 mg/l of BR46, removals were around 53%, which was significantly higher than those for other mixtures: 5 mg/l of RB198 and 5 mg/l of BR46 and 8 mg/l of RB198 and 2 mg/l of BR46 achieved only 41 and 26% removals, respectively. Dye mixtures stopped the growth of L. minor, and the presence of artificial wastewater reduced their development.

  1. Explosibility boundaries for fly ash/pulverized fuel mixtures.

    Science.gov (United States)

    Dastidar, A G; Amyotte, P R

    2002-05-27

    Incomplete combustion and subsequent fuel contamination of a waste stream can pose a serious explosion hazard. An example of this type of incident is the contamination of fly ash with unburned pulverized coal. The coal, if present in sufficient quantities in the mixture, can act as a fuel source for a potential explosion. Experiments were conducted in a 20l Siwek explosibility test chamber to determine the minimum fuel contamination of fly ash required to form an explosible mixture. A sample of fly ash from Ontario Power Generation (OPG) (Ont., Canada) was artificially contaminated with Pittsburgh pulverized coal dust (the surrogate used to represent unburned fuel dust). Additionally, the influence of fly ash particle size on the amount of fuel contaminant required to form an explosible mixture was examined. Fine and coarse size fractions of fly ash were obtained by screening the original sample of OPG fly ash. The results show that at least 21% Pittsburgh pulverized coal (or 10% volatile matter) was required to form an explosible mixture of the original fly ash sample and coal dust. The results also illustrate that fly ash particle size is important when examining the explosibility of the mixture. The fine size fraction of fly ash required a minimum of 25% coal dust (12% volatile matter) in the mixture for explosibility, whereas the coarse fly ash required only 10% coal dust (7% volatile matter). Thus, the larger the particle size of the inert fly ash component in the mixture, the greater the hazard.

  2. Forensic identification of an individual in complex DNA mixtures.

    Science.gov (United States)

    Voskoboinik, Lev; Darvasi, Ariel

    2011-11-01

    The identification of a suspect in a complex DNA mixture typed with standard short tandem repeat (STR) kits has proved difficult. In the current study we present the theoretical framework of a method aimed to resolve this problem in forensic cases. The method suggests genotyping a specially designed panel of 1000-3000 single nucleotide polymorphisms (SNPs), each with a relatively low (DNA mixture will carry this particular set only if the one individual is represented in the DNA mixture. The efficiency of the method is evaluated by estimating the probability that a random man will not be excluded (RMNE) from the mixture. When this probability, P(RMNE), is low, one can conclude that the suspect's DNA is present in the DNA mixture. Essentially, a P(RMNE)DNA mixture and when contributors or suspects come from different populations. We have also found that the method can accurately identify the number of contributors to the mixture, something that in some instances has significant forensic value on its own. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  3. Automatic Control of the Concrete Mixture Homogeneity in Cycling Mixers

    Science.gov (United States)

    Anatoly Fedorovich, Tikhonov; Drozdov, Anatoly

    2018-03-01

    The article describes the factors affecting the concrete mixture quality related to the moisture content of aggregates, since the effectiveness of the concrete mixture production is largely determined by the availability of quality management tools at all stages of the technological process. It is established that the unaccounted moisture of aggregates adversely affects the concrete mixture homogeneity and, accordingly, the strength of building structures. A new control method and the automatic control system of the concrete mixture homogeneity in the technological process of mixing components have been proposed, since the tasks of providing a concrete mixture are performed by the automatic control system of processing kneading-and-mixing machinery with operational automatic control of homogeneity. Theoretical underpinnings of the control of the mixture homogeneity are presented, which are related to a change in the frequency of vibrodynamic vibrations of the mixer body. The structure of the technical means of the automatic control system for regulating the supply of water is determined depending on the change in the concrete mixture homogeneity during the continuous mixing of components. The following technical means for establishing automatic control have been chosen: vibro-acoustic sensors, remote terminal units, electropneumatic control actuators, etc. To identify the quality indicator of automatic control, the system offers a structure flowchart with transfer functions that determine the ACS operation in transient dynamic mode.

  4. Improved gas mixtures for gas-filled particle detectors

    Science.gov (United States)

    Christophorou, L.G.; McCorkle, D.L.; Maxey, D.V.; Carter, J.G.

    Improved binary and tertiary gas mixture for gas-filled particle detectors are provided. The components are chosen on the basis of the principle that the first component is one gas or mixture of two gases having a large electron scattering cross section at energies of about 0.5 eV and higher, and the second component is a gas (Ar) having a very small cross section at and below about 0.5 eV; whereby fast electrons in the gaseous mixture are slowed into the energy range of about 0.5 eV where the cross section for the mixture is small and hence the electron mean free path is large. The reduction in both the cross section and the electron energy results in an increase in the drift velocity of the electrons in the gas mixtures over that for the separate components for a range of E/P (pressure-reduced electron field) values. Several gas mixtures are provided that provide faster response in gas-filled detectors for convenient E/P ranges as compared with conventional gas mixtures.

  5. Parameters of Solidifying Mixtures Transporting at Underground Ore Mining

    Directory of Open Access Journals (Sweden)

    Golik Vladimir

    2017-01-01

    Full Text Available The article is devoted to the problem of providing mining enterprises with solidifying filling mixtures at underground mining. The results of analytical studies using the data of foreign and domestic practice of solidifying mixtures delivery to stopes are given. On the basis of experimental practice the parameters of transportation of solidifying filling mixtures are given with an increase in their quality due to the effect of vibration in the pipeline. The mechanism of the delivery process and the procedure for determining the parameters of the forced oscillations of the pipeline, the characteristics of the transporting processes, the rigidity of the elastic elements of pipeline section supports and the magnitude of vibrator’ driving force are detailed. It is determined that the quality of solidifying filling mixtures can be increased due to the rational use of technical resources during the transportation of mixtures, and as a result the mixtures are characterized by a more even distribution of the aggregate. The algorithm for calculating the parameters of the pipe vibro-transport of solidifying filling mixtures can be in demand in the design of mineral deposits underground mining technology.

  6. Electrical characteristics research of 25% ethanol/deionized water mixture

    International Nuclear Information System (INIS)

    Xu Jian; Yang Hanwu; Zhang Zicheng; Tian Xiwen; Zuo Yangbo

    2014-01-01

    In this paper, the application of the mixture as an energy storage medium in the pulsed modulator is explored. Resistivity and freezing point of 25% ethanol/deionized water mixture are measured after deionization and removal impurity by using liquid cleaning equipment. And the pulsed insulating properties and engineering applications of ethanol/deionized water mixture in the microsecond regime are both investigated by using compact capacitive-energy-storage pulsed modulator. Conclusions are shown as follows. (l) The resistivity of ethanol/deionized water mixture can be raised to 230.5 MΩ·cm from 7.3 MΩ·cm after cleaning treatment, and it drops to 27.6 MΩ· cm after 30 days which is still higher than deionized water after cleaning treatment. (2) The freezing point of 25% ethanol/deionized water mixture is experimentally measured to be approximately-10.2 centigrade, which is in agreement with the Lan's Handbook of Chemistry. (3) The breakdown strength of 25% ethanol/deionized water mixture can achieve approximately 160 kV/cm under the microsecond charging time, which is more than that of 25% ethylene glycol/deionized water mixture. (authors)

  7. Gas mixtures for gas-filled radiation detectors

    International Nuclear Information System (INIS)

    Carter, J.G.; Christophorou, L.G.; Maxey, D.V.; Mccorkle, D.L.

    1982-01-01

    Improved binary and ternary gas mixtures for gas-filled radiation detectors are provided. The components are chosen on the basis of the principle that the first component is one molecular gas or mixture of two molecular gases having a large electron scattering cross section at energies of about 0.5 ev and higher, and the second component is a noble gas having a very small cross section at and below about 1.0 ev, whereby fast electrons in the gaseous mixture are slowed into the energy range of about 0.5 ev where the cross section for the mixture is small and hence the electron mean free path is large. The reduction in both the cross section and the electron energy results in an increase in the drift velocity of the electrons in the gas mixtures over that for the separate components for a range of e/p (Pressure-reduced electric field) values. Several gas mixtures are provided that provide faster response in gas-filled detectors for convenient e/p ranges as compared with conventional gas mixtures

  8. Preparation of carbonized biomass water mixture and upgraded coal water mixture

    Energy Technology Data Exchange (ETDEWEB)

    Umar, D.F.; Usui, H.; Komoda, Y.; Daulay, B. [Research & Development Centre for Mineral & Coal Technology, Bandung (Indonesia)

    2006-11-15

    Biomass is the third largest primary energy resource in the world after coal and oil. Due to its huge potential, the renewable and the corresponding positive role for CO{sub 2} reduction, the use of carbonized biomass for energy purpose is expected to increase. The carbonized biomass comes from agricultural waste and forest by-product. Carbonized plant and carbonized coconut cell biomass were mixed with water to study the possibilities of slurry preparation as a carbonized biomass water mixture (CBWM). Beside that, the upgraded coal by an upgraded brown coal (UBC) process was also studied to produce a UBC water mixture (UBCWM) with high coal concentration. The rheological characteristics of CBWM and UBCWM have been conducted by using a stress controlled rheometer. The results indicate that the maximum concentrations of the carbonized plant, carbonized coconut cell biomass, and UBC were 35.9, 51.2, and 61.5 wt%, when respectively using 0.3 wt% of naphthalene sulfonic acid (NSF), polymethacrylate (PMA), and NSF as dispersing additives, and 0.1 wt% of carboxyl methyl cellulose (CMC) as a stabilizing additive.

  9. Detonation characteristics of dimethyl ether and ethanol-air mixtures

    Science.gov (United States)

    Diakow, P.; Cross, M.; Ciccarelli, G.

    2015-05-01

    The detonation cell structure in dimethyl ether vapor and ethanol vapor-air mixtures was measured at atmospheric pressure and initial temperatures in the range of 293-373 K. Tests were carried out in a 6.2-m-long, 10-cm inner diameter tube. For more reactive mixtures, a series of orifice plates were used to promote deflagration-to-detonation transition in the first half of the tube. For less reactive mixtures prompt detonation initiation was achieved with an acetylene-oxygen driver. The soot foil technique was used to capture the detonation cell structure. The measured cell size was compared to the calculated one-dimensional detonation reaction zone length. For fuel-rich dimethyl ether mixtures the calculated reaction zone is highlighted by a temperature gradient profile with two maxima, i.e., double heat release. The detonation cell structure was interpreted as having two characteristic sizes over the full range of mixture compositions. For mixtures at the detonation propagation limits the large cellular structure approached a single-head spin, and the smaller cells approached the size of the tube diameter. There is little evidence to support the idea that the two cell sizes observed on the foils are related to the double heat release predicted for the rich mixtures. There was very little influence of initial temperature on the cell size over the temperature range investigated. A double heat release zone was not predicted for ethanol-air detonations. The detonation cell size for stoichiometric ethanol-air was found to be similar to the size of the small cells for dimethyl ether. The measured cell size for ethanol-air did not vary much with composition in the range of 30-40 mm. For mixtures near stoichiometric it was difficult to discern multiple cell sizes. However, near the detonation limits there was strong evidence of a larger cell structure similar to that observed in dimethyl ether air mixtures.

  10. Taste mixture interactions: suppression, additivity, and the predominance of sweetness.

    Science.gov (United States)

    Green, Barry G; Lim, Juyun; Osterhoff, Floor; Blacher, Karen; Nachtigal, Danielle

    2010-12-02

    Most of what is known about taste interactions has come from studies of binary mixtures. The primary goal of this study was to determine whether asymmetries in suppression between stimuli in binary mixtures predict the perception of tastes in more complex mixtures (e.g., ternary and quaternary mixtures). Also of interest was the longstanding question of whether overall taste intensity derives from the sum of the tastes perceived within a mixture (perceptual additivity) or from the sum of the perceived intensities of the individual stimuli (stimulus additivity). Using the general labeled magnitude scale together with a sip-and-spit procedure, we asked subjects to rate overall taste intensity and the sweetness, sourness, saltiness and bitterness of approximately equi-intense sucrose, NaCl, citric acid and QSO(4) stimuli presented alone and in all possible binary, ternary and quaternary mixtures. The results showed a consistent pattern of mixture suppression in which sucrose sweetness tended to be both the least suppressed quality and the strongest suppressor of other tastes. The overall intensity of mixtures was found to be predicted best by perceptual additivity. A second experiment that was designed to rule out potentially confounding effects of the order of taste ratings and the temperature of taste solutions replicated the main findings of the first experiment. Overall, the results imply that mixture suppression favors perception of sweet carbohydrates in foods at the expense of other potentially harmful ingredients, such as high levels of sodium (saltiness) and potential poisons or spoilage (bitterness and sourness). Copyright © 2010 Elsevier Inc. All rights reserved.

  11. Lattice Models of Amphiphile and Solvent Mixtures.

    Science.gov (United States)

    Brindle, David

    Available from UMI in association with The British Library. Materials based on amphiphilic molecules have a wide range of industrial applications and are of fundamental importance in the structure of many biological systems. Their importance derives from their behaviour as surface-active agents in solubilization applications and because of their ability to form systems with varying degrees of structural order such as micelles, bilayers and liquid crystal phases. The nature of the molecular ordering is of importance both during the processing of these materials and in their final application. A Monte Carlo simulation of a three dimensional lattice model of an amphiphile and solvent mixture has been developed as an extension of earlier work in two dimensions. In the earlier investigation the simulation was carried out with three segment amphiphiles on a two dimensional lattice and cluster size distributions were determined for a range of temperatures, amphiphile concentrations and intermolecular interaction energies. In the current work, a wider range of structures are observed including micelles, bilayers and a vesicle. The structures are studied as a function of temperature, chain length, amphiphile concentration and intermolecular interaction energies. Clusters are characterised according to their shape, size and surface roughness. A detailed temperature -concentration phase diagram is presented for a system with four segment amphiphiles. The phase diagram shows a critical micelle concentration (c.m.c.) at low amphiphile concentrations and a transition from a bicontinuous to lamellar region at amphiphile concentrations around 50%. At high amphiphile concentrations, there is some evidence for the formation of a gel. The results obtained question the validity of current models of the c.m.c. The Monte Carlo simulations require extensive computing power and the simulation was carried out on a transputer array, where the parallel architecture allows high speed. The

  12. Research of oxyhydrogen gas mixture influence upon diesel engine performance

    Directory of Open Access Journals (Sweden)

    Dimitrov Evgeni

    2017-01-01

    Full Text Available The paper presents the results from testing a Volkswagen 1.9 D diesel engine on a test bench to work on gas-diesel cycle with oxyhydrogen gas mixture. Experimental research is done to show the impact of oxyhydrogen gas mixture on engine consumption and environmental indexes such as: fuel and specific fuel consumption; carbon monoxide; carbon dioxide; oxides of nitrogen; smoke emissions. The oxyhydrogen gas mixture delivered to the engine intake manifold with constant flow rate. The results are obtained under research contract № 6524-4/2016.

  13. Identification and separation of DNA mixtures using peak area information

    DEFF Research Database (Denmark)

    Cowell, R.G.; Lauritzen, Steffen Lilholt; Mortera, J.

    We show how probabilistic expert systems can be used to analyse forensic identification problems involving DNA mixture traces using quantitative peak area information. Peak area is modelled with conditional Gaussian distributions. The expert system can be used for scertaining whether individuals......, whose profiles have been measured, have contributed to the mixture, but also to predict DNA profiles of unknown contributors by separating the mixture into its individual components. The potential of our methodology is illustrated on case data examples and compared with alternative approaces...

  14. Chemometrics as a tool to analyse complex chemical mixtures

    DEFF Research Database (Denmark)

    Christensen, J. H.

    and at the same time must consider a substantial fraction of compounds in the complex mixture. A combination of a) limited sample preparation, b) rapid chemical screening analysis, c) fast and semi-automatic pre-processing, d) compre- hensive multivariate statistical data analysis and e) objective data evaluation......Chemical characterisation of contaminant mixtures is important for environmental forensics and risk assessment. The great challenge in future research lies in develop- ing suitable, rapid, reliable and objective methods for analysis of the composition of complex chemical mixtures. This thesis...

  15. Segregation of granular binary mixtures by a ratchet mechanism.

    Science.gov (United States)

    Farkas, Zénó; Szalai, Ferenc; Wolf, Dietrich E; Vicsek, Tamás

    2002-02-01

    We report on a segregation scheme for granular binary mixtures, where the segregation is performed by a ratchet mechanism realized by a vertically shaken asymmetric sawtooth-shaped base in a quasi-two-dimensional box. We have studied this system by computer simulations and found that most binary mixtures can be segregated using an appropriately chosen ratchet, even when the particles in the two components have the same size and differ only in their normal restitution coefficient or friction coefficient. These results suggest that the components of otherwise nonsegregating granular mixtures may be separated using our method.

  16. Spectrophotometric determination of volautile inorganic hydrides in binary gaseous mixtures

    International Nuclear Information System (INIS)

    Rezchikov, V.G.; Skachkova, I.N.; Kuznetsova, T.S.; Khrushcheva, V.V.

    1985-01-01

    A study was made on possibility of single and continuons analysis of binary mixtures (hydride-gas) for the content of volatile inorganic hydrides (VIH) from absorption spectra in the 185-280 nm band. Dependences of the percentage of VIH transmission on the wavelength are presented. It is shown that the maximum of their absorption depends on the element-hydrogen the bond length and binding energy. Detection limit for boron hydride was established to be n x 10 -3 % vol at 185-190 nm wavelength. Technique for spectrophotometric hydride determination in binary mixtures with hydrogen, argon, helium was developed. The technique provides the continuous control of gaseous mixture composition

  17. Lattice Boltzmann model for thermal binary-mixture gas flows.

    Science.gov (United States)

    Kang, Jinfen; Prasianakis, Nikolaos I; Mantzaras, John

    2013-05-01

    A lattice Boltzmann model for thermal gas mixtures is derived. The kinetic model is designed in a way that combines properties of two previous literature models, namely, (a) a single-component thermal model and (b) a multicomponent isothermal model. A comprehensive platform for the study of various practical systems involving multicomponent mixture flows with large temperature differences is constructed. The governing thermohydrodynamic equations include the mass, momentum, energy conservation equations, and the multicomponent diffusion equation. The present model is able to simulate mixtures with adjustable Prandtl and Schmidt numbers. Validation in several flow configurations with temperature and species concentration ratios up to nine is presented.

  18. Transport properties of supercritical fluids and their binary mixtures

    CERN Document Server

    Luedemann, H D

    2002-01-01

    The molecular dynamics of the two supercritical fluids most applied in industry and some of their mixtures are characterized by their self-diffusion coefficients D sub i , measured by high pressure high resolution nuclear magnetic resonance with the strengthened glass cell technique. The technical details of the apparatus will be given. The fluids studied are carbon dioxide and ammonia. For CO sub 2 , mixtures with C sub 6 H sub 6 , H sub 2 , CH sub 3 COOH and CH sub 3 OH were investigated. The NH sub 3 mixtures include C sub 6 H sub 6 , (CH sub 3) sub 3 N, CH sub 3 CN and CH sub 3 OH.

  19. Phase and viscosity behaviour of refrigerant-lubricant mixtures

    DEFF Research Database (Denmark)

    Cisneros, Sergio; Garcia, J.; Fernandez, J.

    2005-01-01

    The understanding of thermophysical properties and phase behaviour of refrigerant-lubricant oil mixtures is highly important for the optimal design of refrigeration and air-conditioning systems. Refrigerant lubricant mixtures, which are likely to have strong asymmetry, can show complex phase...... behaviour such as closed miscibility gaps, open miscibility gaps, liquid-liquid-vapour equilibrium, and even barotropic phenomena (density inversions). In fact, the type of phase behaviour that refrigerant-lubricant mixtures may show is linked to the transition between different types of phase diagrams...

  20. Chemical kinetics of detonation in some liquid mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Raikova, Vlada M.; Likholatov, Evgeny A. [Mendeleev University of Chemical Technology, Moscow (Russian Federation)

    2005-09-01

    The main objective of this work is to study the chemical kinetics of detonation reactions in some nitroester mixtures and solutions of nitrocompounds in concentrated nitric acid. The main source of information on chemical kinetics in the detonation wave was the experimental dependence of failure diameter on composition of mixtures. Calculations were carried out in terms of classic theory of Dremin using the SGKR computer code. Effective values for the activation energies and pre-exponential factors for detonation reactions in the mixtures under investigation have been defined. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  1. The effect of mixtures of organophosphate and carbamate pesticides on acetylcholinesterase and application of chemometrics to identify pesticides in mixtures.

    Science.gov (United States)

    Mwila, K; Burton, M H; Van Dyk, J S; Pletschke, B I

    2013-03-01

    Organophosphate (OP) and carbamate (CP) pesticides act by the inhibition of acetylcholinesterase (AChE). This enables the use of this enzyme for the detection of these pesticides in the environment. While many studies have looked at the effect of single pesticides on AChE, the effect of mixtures of pesticides still requires extensive investigation. This is important to evaluate the cumulative risk in the case of simultaneous exposure to multiple pesticides. Therefore we examined the effect of five different pesticides (carbaryl, carbofuran, parathion, demeton-S-methyl, and aldicarb) on AChE activity to determine whether combinations had an additive, synergistic, or antagonistic inhibitory effect. Results indicated that the mixtures had an additive inhibitory effect on AChE activity. The data from the assays of the mixtures were used to develop and train an artificial neural network (ANN) which was then utilised successfully for the identification of pesticides and their concentrations in mixtures. This study is significant because it evaluated mixtures of OPs and CPs where previous studies focused on either OPs or CPs. Previous studies have only examined up to three pesticides while this study evaluated mixtures of five pesticides simultaneously. This is also the first study where an ANN was able to utilise data from the inhibition of a single enzyme to differentiate five different pesticides and their concentrations from mixtures.

  2. Native prairie revegetation on wellsites in southeastern Alberta

    International Nuclear Information System (INIS)

    Soulodre, E.; Naeth, A.; Hammermeister, A.

    1999-01-01

    The Native Prairie Revegetation Research Project (NPRRP) was initiated to address concerns about wellsite revegetation of native grassland. The objective was to determine the impact of alternative seeding treatments on soil and vegetation and to produce a quantifiable description of what constitutes successful revegetation of native prairie sites. Four wellsites, each site comprising four revegetation treatment plots and an undisturbed control plot, have been chosen for field study. The revegetation treatments included natural recovery without seeding; current mix dominated by native wheatgrass cultivars; simple mix seeding containing wheatgrasses plus other native grasses, and diverse mix seeding with a mixture of wheatgrasses, other grasses and thirteen perennial forbs. The plant communities were monitored for biomass production, species richness, species composition and a combination of factors which include density, frequency, canopy cover and basal cover, these collectively representing importance value. Nitrogen availability in the soil was also monitored. Results showed high importance values for wheatgrasses for all seeded treatments. Perennial non-wheatgrasses had low importance values in the seeded treatment but higher importance in the control plot. The dominance of wheatgrasses in the seeded treatments resulted in communities that differed significantly from both the control and natural recovery communities, probably due to suppression of the growth of other grasses

  3. Fluorescence and gain predictions in laser dye mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Ali, M.; Ahmed, S.A.; Mitwally, K. (CUNY City College, Department of Electrical Engineering, Institute for Ultrafast Spectroscopy and Lasers, New York, New York 10031 (US))

    1989-09-01

    Radiative energy transfer in three different laser dye mixtures composed of (1) dichlorofluorescein (donor) and DODC (acceptor), (2) dichlorofluorescein (donor) and RhB (acceptor), and (3) coumarine (donor) and RhB (acceptor) have been studied under steady state excitation conditions. Analytical expressions have been developed to predict steady state fluorescence and hence gain line shape of laser dye mixtures using computer simulation. The theoretical predictions derived are generally in excellent agreement with experimental results, which confirm that at the mixture concentrations needed for lasing, radiative transfer is the dominant energy transfer mechanism. The method developed is effective and practical for predicting laser gain lineshapes (and hence tunability) as well as predicting fluorescence emission spectra of dye mixtures.

  4. Mixture Segmentation of Multispectral MR Brain Images for Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Lihong Li

    2005-04-01

    Full Text Available We present a fully automatic mixture model-based tissue classification of multispectral (T1- and T2-weighted magnetic resonance (MR brain images. Unlike the conventional hard classification with a unique label for each voxel, our method models a mixture to estimate the partial volumes (PV of multiple tissue types within a voxel. A new Markov random field (MRF model is proposed to reflect the spatial information of tissue mixtures. A mixture classification algorithm is performed by the maximum a posterior (MAP criterion, where the expectation maximization (EM algorithm is utilized to estimate model parameters. The algorithm interleaves segmentation with parameter estimation and improves classification in an iterative manner. The presented method is evaluated by clinical MR image datasets for quantification of brain volumes and multiple sclerosis (MS.

  5. Research note : field control of asphalt concrete paving mixtures.

    Science.gov (United States)

    1995-01-01

    The goal of this study was to develop information and evaluate new methods for controlling quality of the AC mixture in the mat. Specifically, this research project evaluated a gyratory compactor in the field laboratory to determine mix quality. Spec...

  6. Optimizing cementious content in concrete mixtures for required performance.

    Science.gov (United States)

    2012-01-01

    "This research investigated the effects of changing the cementitious content required at a given water-to-cement ratio (w/c) on workability, strength, and durability of a concrete mixture. : An experimental program was conducted in which 64 concrete ...

  7. A Dirichlet process mixture model for brain MRI tissue classification.

    Science.gov (United States)

    Ferreira da Silva, Adelino R

    2007-04-01

    Accurate classification of magnetic resonance images according to tissue type or region of interest has become a critical requirement in diagnosis, treatment planning, and cognitive neuroscience. Several authors have shown that finite mixture models give excellent results in the automated segmentation of MR images of the human normal brain. However, performance and robustness of finite mixture models deteriorate when the models have to deal with a variety of anatomical structures. In this paper, we propose a nonparametric Bayesian model for tissue classification of MR images of the brain. The model, known as Dirichlet process mixture model, uses Dirichlet process priors to overcome the limitations of current parametric finite mixture models. To validate the accuracy and robustness of our method we present the results of experiments carried out on simulated MR brain scans, as well as on real MR image data. The results are compared with similar results from other well-known MRI segmentation methods.

  8. Rheology and Segregation of Granular Mixtures in Dense Flows

    Indian Academy of Sciences (India)

    Devang Khakhar

    IIT Bombay. Rheology and Segregation of. Granular Mixtures in Dense Flows. Devang Khakhar. Department of Chemical Engineering. Indian Institute of Technology Bombay. Mumbai, India. Acknowledgment: Anurag Tripathi. 77th Annual Meeting of IASc, Ahmedabad, 18-20 Nov, 2011 ...

  9. Permeation of aromatic solvent mixtures through nitrile protective gloves.

    Science.gov (United States)

    Chao, Keh-Ping; Hsu, Ya-Ping; Chen, Su-Yi

    2008-05-30

    The permeation of binary and ternary mixtures of benzene, toluene, ethyl benzene and p-xylene through nitrile gloves were investigated using the ASTM F739 test cell. The more slowly permeating component of a mixture was accelerated to have a shorter breakthrough time than its pure form. The larger differences in solubility parameter between a solvent mixture and glove resulted in a lower permeation rate. Solubility parameter theory provides a potential approach to interpret the changes of permeation properties for BTEX mixtures through nitrile gloves. Using a one-dimensional diffusion model based on Fick's law, the permeation concentrations of ASTM F739 experiments were appropriately simulated by the estimated diffusion coefficient and solubility. This study will be a fundamental work for the risk assessment of the potential dermal exposure of workers wearing protective gloves.

  10. Modeling amplitude SAR image with the Cauchy-Rayleigh mixture

    Science.gov (United States)

    Peng, Qiangqiang; Du, Qingyu; Yao, Yinwei; Huang, Huang

    2017-10-01

    In this paper, we introduce a novel mixture model of the SAR amplitude image, which is proposed as an approximation to the heavy-tailed Rayleigh model. The limitation of the heavy-tailed Rayleigh model in SAR image application is discussed. We also present an expectation-maximization (EM) algorithm based parameter estimation method for the Cauchy-Rayleigh mixture. We test the new model on some simulated data in order to confirm that is appropriate to the heavy-tailed Rayleigh model. The performance is evaluated by some statistic values (cumulative square errors (CSE) 0.99 and Kolmogorov-Smirnov distance (K-S) the performance of the proposed mixture model is tested on some real SAR images and compared with other models, including the heavy-tailed Rayleigh and Nakagami mixture models. The result indicates that the proposed model can be an optional statistical model for amplitude SAR images.

  11. Laboratory evaluation of friction loss and compactability of asphalt mixtures.

    Science.gov (United States)

    2012-04-01

    This study aimed to develop prediction models for friction loss and laboratory compaction of asphalt : mixtures. In addition, the study evaluated the effect of compaction level and compaction method of skid : resistance and the internal structure of ...

  12. Polynomial mixture method of solving ordinary differential equations

    Science.gov (United States)

    Shahrir, Mohammad Shazri; Nallasamy, Kumaresan; Ratnavelu, Kuru; Kamali, M. Z. M.

    2017-11-01

    In this paper, a numerical solution of fuzzy quadratic Riccati differential equation is estimated using a proposed new approach that provides mixture of polynomials where iteratively the right mixture will be generated. This mixture provide a generalized formalism of traditional Neural Networks (NN). Previous works have shown reliable results using Runge-Kutta 4th order (RK4). This can be achieved by solving the 1st Order Non-linear Differential Equation (ODE) that is found commonly in Riccati differential equation. Research has shown improved results relatively to the RK4 method. It can be said that Polynomial Mixture Method (PMM) shows promising results with the advantage of continuous estimation and improved accuracy that can be produced over Mabood et al, RK-4, Multi-Agent NN and Neuro Method (NM).

  13. Petroleum Diesel Fuel and Linseed Oil Mixtures as Engine Fuels

    Science.gov (United States)

    Markov, V. A.; Kamaltdinov, V. G.; Savastenko, A. A.

    2018-01-01

    The actual problem is the use of alternative biofuels in automotive diesel engines. Insufficiently studied are the indicators of toxicity of exhaust gases of these engines operating on biofuel. The aim of the study is to identify indicators of the toxicity of exhaust gases when using of petroleum diesel fuel and linseed oil mixtures as a fuel for automotive diesel engines. Physical and chemical properties of linseed oil and its mixtures with petroleum diesel fuel are considered. Experimental researches of D-245.12C diesel are carried out on mixtures of diesel fuel and corn oil with a different composition. An opportunity of exhaust toxicity indexes improvement using these mixtures as a fuel for automobiles engine is shown.

  14. Folk medicinal plant mixtures: Establishing a protocol for further studies.

    Science.gov (United States)

    Gras, Airy; Parada, Montse; Rigat, Montse; Vallès, Joan; Garnatje, Teresa

    2018-03-25

    Most ethnobotanical research bases its analyses on individual taxa catalogues and their uses, rather than on mixtures. However, mixtures constitute an important chapter of our different lines of research and they represent a large volume of information. The relevance of these data in folk medicine could be explained as a response to the cure of multicausal etiology diseases or by a possible polyvalent effect of the mixture as opposed to the effect of each taxon alone. The main goals are: i) to perform qualitative and quantitative analyses of these mixtures; ii) to carry out a comparison among the mixtures in two Catalan territories and their floristic composition; iii) to assess the worth of families association; and, iv) to evaluate whether the plants claimed to be used in mixtures have contraindications or possible negative interactions according to phytopharmaceutical literature. The ultimate goal is to test a protocol that can be implemented in similar studies. We have used data on medicinal plant mixtures obtained from two extensive ethnobotanical field studies carried out in two Catalan districts, Alt Empordà and Ripollès. The quantitative analyses by means of descriptive statistics were carried out with Excel. New contributions like the implementation of the Shannon index to quantify the diversity of families in plant combinations, the creation of a new index to calculate the taxon importance in mixtures, or the use of a social network analysis to study the connection between botanical families have been employed in this work. In total, a set of 484 mixtures from Alt Empordà and Ripollès (Catalonia, Iberian Peninsula) have been analysed: 462 for human use and 22 for veterinary. Thymus vulgaris and Rosmarinus officinalis are among the most commonly used species in mixtures. The aerial part of the plant is the most used, and the anticatarrhal usage is the most frequent in both territories. A wide diversity of families has been observed in mixtures and

  15. Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

    Directory of Open Access Journals (Sweden)

    Byong Chol Bai

    2015-01-01

    Full Text Available This paper investigates the thermal properties of asphalt mixtures modified with conductive fillers used for snow melting and solar harvesting pavements. Two different mixing processes were adopted to mold asphalt mixtures, dry- and wet-mixing, and two conductive fillers were used in this study, graphite and carbon black. The thermal conductivity was compared to investigate the effects of asphalt mixture preparing methods, the quantity, and the distribution of conductive filler on thermal properties. The combination of conductive filler with carbon fiber in asphalt mixture was evaluated. Also, rheological properties of modified asphalt binders with conductive fillers were measured using dynamic shear rheometer and bending beam rheometer at grade-specific temperatures. Based on rheological testing, the conductive fillers improve rutting resistance and decrease thermal cracking resistance. Thermal testing indicated that graphite and carbon black improve the thermal properties of asphalt mixes and the combined conductive fillers are more effective than the single filler.

  16. Evaluation of superpave mixtures containing hydrated lime : tech summary.

    Science.gov (United States)

    2013-08-01

    In the mid-1990s the Louisiana Department of Transportation and Development (LADOTD) revised its hot-mix asphalt (HMA) : mixture specifi cations. Some of those major changes included requiring larger nominal maximum aggregate size in its : aggregate ...

  17. Risk management of low air void asphalt concrete mixtures.

    Science.gov (United States)

    2013-07-01

    Various forms of asphalt pavement distress, such as rutting, shoving and bleeding, can be attributed, in many cases, to low air voids in : the mixtures during production and placement. The occurrence of low air void contents during plant production m...

  18. Powder XRD investigations on dotriacontane in mixtures: Phase ...

    Indian Academy of Sciences (India)

    Abstract. Powder XRD investigations on dotriacontane-decane and dotriacontane-decanol mixtures are made. Phase strength, phase separation and formation of superlattices are discussed. The role of tunnel-like defects is considered.

  19. Development of a design methodology for asphalt treated mixtures.

    Science.gov (United States)

    2013-12-01

    This report summarizes the results of a study that was conducted to develop a simplified design methodology for asphalt : treated mixtures that are durable, stable, constructible, and cost effective through the examination of the performance of : mix...

  20. Reducing cement content in concrete mixtures : [research brief].

    Science.gov (United States)

    2011-12-01

    Concrete mixtures contain crushed rock or gravel, and sand, bound together by Portland cement in combination with supplemental cementitious materials (SCMs), which harden through a chemical reaction with water. Portland cement is the most costly comp...

  1. Establishing Mixtures of Redcedar In Poor Oak-Hickory Forests

    Science.gov (United States)

    Leon S. Minckler

    1966-01-01

    Oak-history forests on the poorest sites in the Upper Mississippi Valley have both low productivity and little esthetic appeal. A mixture of the native evergreen redcedar would add bearty and increase wildlife values.

  2. Recycled tires as coarse aggregate in concrete pavement mixtures.

    Science.gov (United States)

    2013-07-01

    The reuse potential of tire chips as coarse aggregates in pavement concrete was examined in this research by : investigating the effects of low- and high-volume tire chips on fresh and hardened concrete properties. One concrete : control mixture was ...

  3. Thermal Conductivity of Gas Mixtures in Chemical Equilibrium

    Science.gov (United States)

    Brokaw, Richard S.

    1960-01-01

    The expression for the thermal conductivity of gas mixtures in chemical equilibrium is presented in a simpler and less restrictive form. This new form is shown to be equivalent to the previous equations.

  4. Reduced Immunogenicity of DNA Vaccine Plasmids in Mixtures

    National Research Council Canada - National Science Library

    Sedegah, M; Charoenvit, Y; Minh, L; Belmonte, M; Majam, V. F; Abot, S; Ganeshan, H; Kumar, S; Bacon, D. J; Stowers, A; Narum, D. L; Carucci, D. J; Rogers, W. O

    2004-01-01

    We measured the ability of nine DNA vaccine plasmids encoding candidate malaria vaccine antigens to induce antibodies and interferon-gamma responses when delivered alone or in a mixture containing all nine plasmids...

  5. Forced convection heat transfer to air/water vapor mixtures

    International Nuclear Information System (INIS)

    Richards, D.R.; Florschuetz, L.W.

    1986-01-01

    Heat transfer coefficients were measured using both dry air and air/water vapor mixtures in the same forced convection cooling test rig (jet array impingement configurations) with mass ratios of water vapor to air up to 0.23. The primary objective was to verify by direct experiment that selected existing methods for evaluation of viscosity and thermal conductivity of air/water vapor mixtures could be used with confidence to predict heat transfer coefficients for such mixtures using as a basis heat transfer data for dry air only. The property evaluation methods deemed most appropriate require as a basis a measured property value at one mixture composition in addition to the property values for the pure components. 20 references

  6. Modeling self-assembly and phase behavior in complex mixtures.

    Science.gov (United States)

    Balazs, Anna C

    2007-01-01

    Using a variety of computational techniques, I investigate how the self-assembly of complex mixtures can be guided by surfaces or external stimuli to form spatially regular or temporally periodic patterns. Focusing on mixtures in confined geometries, I examine how thermodynamic and hydrodynamic effects can be exploited to create regular arrays of nanowires or monodisperse, particle-filled droplets. I also show that an applied light source and chemical reaction can be harnessed to create hierarchically ordered patterns in ternary, phase-separating mixtures. Finally, I consider the combined effects of confining walls and a chemical reaction to demonstrate that a swollen polymer gel can be driven to form dynamically periodic structures. In addition to illustrating the effectiveness of external factors in directing the self-organization of multicomponent mixtures, the selected examples illustrate how coarse-grained models can be used to capture both the equilibrium phase behavior and the dynamics of these complex systems.

  7. Transport Properties of operational gas mixtures used at LHC

    CERN Document Server

    Assran, Yasser

    2011-01-01

    This report summarizes some useful data on the transport characteristics of gas mixtures which are required for detection of charged particles in gas detectors. We try to replace Freon used for RPC detector in the CMS experiment with another gas while maintaining the good properties of the Freon gas mixture unchanged. We try to switch to freonless gas mixture because Freon is not a green gas, it is very expensive and its availability is decreasing. Noble gases like Ar, He, Ne and Xe (with some quenchers like carbon dioxide, methane, ethane and isobutene) are investigated. Transport parameters like drift velocity, diffusion, Townsend coefficient, attachment coefficient and Lorentz angle are computed using Garfield software for different gas mixtures and compared with experimental data.

  8. Finite Gaussian Mixture Approximations to Analytically Intractable Density Kernels

    DEFF Research Database (Denmark)

    Khorunzhina, Natalia; Richard, Jean-Francois

    The objective of the paper is that of constructing finite Gaussian mixture approximations to analytically intractable density kernels. The proposed method is adaptive in that terms are added one at the time and the mixture is fully re-optimized at each step using a distance measure that approxima......The objective of the paper is that of constructing finite Gaussian mixture approximations to analytically intractable density kernels. The proposed method is adaptive in that terms are added one at the time and the mixture is fully re-optimized at each step using a distance measure...... that approximates the corresponding importance sampling variance. All functions of interest are evaluated under Gaussian quadrature rules. Examples include a sequential (filtering) evaluation of the likelihood function of a stochastic volatility model where all relevant densities (filtering, predictive...

  9. Mixtures Equation Pilot Program to Reduce Animal Testing

    Science.gov (United States)

    EPA is announcing the start of a pilot program to evaluate the usefulness and acceptability of a mathematical tool (the GHS Mixtures Equation), which is used in the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).

  10. Concrete mixtures with high-workability for ballastless slab tracks

    OpenAIRE

    Olga Smirnova

    2017-01-01

    The concrete track-supporting layer and the monolithic concrete slab of ballastless track systems are made in-situ. For this reason the concrete mixtures of high workability should be used. Influence of the sand kind, the quartz microfiller fineness and quantity as well as quantity of superplasticizer on workability of fresh concrete and durability of hardened concrete is shown. The compositions of the high-workability concrete mixtures with lower consumption of superplasticizer are developed...

  11. Acoustic properties of organic acid mixtures in water

    Science.gov (United States)

    Macavei, I.; Petrisor, V.; Auslaender, D.

    1974-01-01

    The variation of the rate of propagation of ultrasounds in organic acid mixtures in water points to structural changes caused by interactions that take place under conditions of thermal agitation, at different acid concentrations. At the same time, a difference is found in the changes in velocity as a function of the length of the carbon chain of the acids in the mixture as a result of their effect on the groups of water molecules associated by hydrogen bonds.

  12. SANS studies of critical phenomena in ternary mixtures

    CERN Document Server

    Bulavyn, L A; Hohryakov, A; Garamus, V; Avdeev, M; Almasy, L

    2002-01-01

    Critical behaviour of a quasi-binary liquid mixture is investigated by small-angle neutron scattering. Analysis of the changes of the critical parameters, caused by addition of a small amount of electrolyte into the binary mixture 3-methylpyridine-heavy water, shows that the third component does not change the 3D Ising-type behaviour of the system; a crossover towards the mean-field behaviour is not observed. (orig.)

  13. Comparing bee species responses to chemical mixtures: Common response patterns?

    Directory of Open Access Journals (Sweden)

    Alex Robinson

    Full Text Available Pollinators in agricultural landscapes can be exposed to mixtures of pesticides and environmental pollutants. Existing mixture toxicity modelling approaches, such as the models of concentration addition and independent action and the mechanistic DEBtox framework have been previously shown as valuable tools for understanding and ultimately predicting joint toxicity. Here we apply these mixture models to investigate the potential to interpret the effects of semi-chronic binary mixture exposure for three bee species: Apis mellifera, Bombus terrestris and Osmia bicornis within potentiation and mixture toxicity experiments. In the potentiation studies, the effect of the insecticide dimethoate with added propiconazole fungicide and neonicotinoid insecticide clothianidin with added tau-fluvalinate pyrethroid acaricide showed no difference in toxicity compared to the single chemical alone. Clothianidin toxicity showed a small scale, but temporally conserved increase in exposure conducted in the presence of propiconazole, particularly for B. terrestris and O. bicornis, the latter showing a near three-fold increase in clothianidin toxicity in the presence of propiconazole. In the mixture toxicity studies, the dominant response patterns were of additivity, however, binary mixtures of clothianidin and dimethoate in A. mellifera, B. terrestris and male O. bicornis there was evidence of a predominant antagonistic interaction. Given the ubiquitous nature of exposures to multiple chemicals, there is an urgent need to consider mixture effects in pollinator risk assessments. Our analyses suggest that current models, particularly those that utilise time-series data, such as DEBtox, can be used to identify additivity as the dominant response pattern and also those examples of interactions, even when small-scale, that may need to be taken into account during risk assessment.

  14. Pseudoideal detonation of mechanoactivated mixtures of ammonium perchlorate with nanoaluminum

    Science.gov (United States)

    Shevchenko, A. A.; Dolgoborodov, A. Yu; Brazhnikov, M. A.; Kirilenko, V. G.

    2018-01-01

    Detonation properties of mechanochemical activated ammonium perchlorate with aluminum (AP–Al) mixtures with increased detonation velocity was studied. For compositions with nanoscale aluminum was obtained nonmonotonic dependence of the detonation velocity vs reciprocal diameter. The results generally showed that the combined usage of mechanical activation and nanoscale components of explosive mixtures can significantly increase the detonation ability and reduce the critical diameter to d cr = 7 mm.

  15. Investigation of new gas mixtures for the Pestov Counter

    CERN Document Server

    Sann, H; CERN. Geneva; Eschke, J; Lühning, J; Lynen, U; Neyer, C; Pestov, Yu N; Schmidt, H R; Schreiber, B M; Schulze, R; Stelzer, H; Woerner, A; Frankenfeld, U

    2000-01-01

    The physical principle of discharge localization in Pestor spark counters is described. It was experimentally shown that Isoprene is one of the promising candidates to replace 1,3-Butadiene in the standard gas mixture. In the spark counter with the DME-Argon gas mixture and an aluminium nitrite cathode a discharge localization was obtained for the first time. This result is considered as the beginning of a new spark counter technology without conditioning.

  16. Predicting Development of an Epidemics on Cultivar Mixtures

    DEFF Research Database (Denmark)

    Østergård, Hanne

    1983-01-01

    A mathematical model for the development of an epidemic on a plant cultivar mixture illustrates the influence of the infection efficiency, spore production rate, proportion of deposited spores, frequency of autodeposition, and composition of the mixture on the genetic composition of the pathogen......), and finally mixing fields instead of plants. A relation was found between the long-term rate of disease increase of a pathotype and its number of virulence genes, and this relation was used for evaluating the different strategies....

  17. Experimental Study of Explosion Limits of Refrigerants and Lubricants’ Mixture

    OpenAIRE

    Shi, Y.Q; Chen, Guangming; Chen, Q

    2012-01-01

    The explosion limits of refrigerants and lubricants’ mixture were studied. The refrigerants like R161, R1234yf and R152a are combustible. Lubricants, to a certain extent, are combustion-supporting. In many actual conditions, lubricants and refrigerants are mixed together. In this paper, a test device which can be run automatically was established according to ASTM E681-09, and the explosive experimental of refrigerants and lubricants’ mixture in some ratio was studied. By altering the proport...

  18. High density thermite mixture for shaped charge ordnance disposal

    OpenAIRE

    Tamer Elshenawy; Salah Soliman; Ahmed Hawass

    2017-01-01

    The effect of thermite mixture based on aluminum and ferric oxides for ammunition neutralization has been studied and tested. Thermochemical calculations have been carried out for different percentage of Al using Chemical Equilibrium Code to expect the highest performance thermite mixture used for shaped charge ordnance disposal. Densities and enthalpy of different formulations have been calculated and demonstrated. The optimized thermite formulation has been prepared experimentally using col...

  19. Pervaporation applied for dewatering of reaction mixture during esterification

    OpenAIRE

    Krasiński Andrzej; Wierzba Patrycja; Grudzień Agata; Hajmowicz Halina; Zawada Krzysztof; Synoradzki Ludwik

    2016-01-01

    In this work the esterification of diethyl tartrate was studied. The research was focused on the enhancement of reversible reaction yield, which is accomplished by dewatering of the reaction mixture. The removal of water shifts the equilibrium towards the main product. Pervaporation was applied for this purpose, and results were compared to distillation. The advantages and limitations of both processes are discussed. The experimental part consists of dewatering of mixture after the reaction h...

  20. Curing kinetics of alkyd/melamine resin mixtures

    Directory of Open Access Journals (Sweden)

    Jovičić Mirjana C.

    2009-01-01

    Full Text Available Alkyd resins are the most popular and useful synthetic resins applied as the binder in protective coatings. Frequently they are not used alone but are modified with other synthetic resins in the manufacture of the coatings. An alkyd/melamine resin mixture is the usual composition for the preparation of coating called 'baking enamel' and it is cured through functional groups of resins at high temperatures. In this paper, curing kinetics of alkyd resins based on castor oil and dehydrated castor oil with melamine resin, has been studied by DSC method with programmed heating and in isothermal mode. The results determined from dynamic DSC curves were mathematically transformed using the Ozawa isoconversional method for obtaining the isothermal data. These results, degree of curing versus time, are in good agreement with those determined by the isothermal DSC experiments. By applying the Ozawa method it is possible to calculate the isothermal kinetic parameters for the alkyd/melamine resin mixtures curing using only calorimetric data obtained by dynamic DSC runs. Depending on the alkyd resin type and ratio in mixtures the values of activation energies of curing process of resin mixtures are from 51.3 to 114 kJ mol-1. The rate constant of curing increases with increasing the content of melamine resin in the mixture and with curing temperature. The reaction order varies from 1.12 to 1.37 for alkyd based on dehydrated castor oil/melamine resin mixtures and from 1.74 to 2.03 for mixtures with alkyd based on castor oil. Based on the results obtained, we propose that dehydrated castor oil alkyd/melamine resin mixtures can be used in practice (curing temperatures from 120 to 160°C.

  1. Coarse particles-water mixtures flow in pipes

    Directory of Open Access Journals (Sweden)

    П. Власак

    2017-06-01

    Full Text Available The present paper is focused on evaluation of the effect of average mixture velocity and overall concentration on the pressure drop versus the slurry average velocity relationship, on slurry flow behaviour and local concentration distribution. The experimental investigation was carried out on the pipe loop of inner diameter D =100 mm, which consists of smooth stainless steel pipes and horizontal, inclinable and vertical pipe sections. The frictional pressure drop in the horizontal pipe section were significantly higher than that in the vertical pipe due to the fact, that for stratified flow the contact load produced significant energy losses. The frictional pressure drop of coarse particles mixtures in vertical pipe increased with the increasing mixture concentration and velocity, what confirmed effect of inner friction, inter-particles collision, and the drag due to particle-liquid slip. It was found that for stratified coarse particles-water mixture the frictional pressure drop was not significantly influenced by the pipe inclination, especially for low concentration values. The effect of pipe inclination decreased with increasing mixture velocity in ascending pipe section; the maximum value was reached for inclination between 20 and 40 degrees. Inclination of pressure drop maximum increased with decreasing mixture velocity. In descending pipe section the frictional pressure drop gradually decreased with increasing pipe inclination. The effect of inclination on frictional pressure drops could be practically neglected, especially for low mixture concentration and higher flow velocities. The study revealed that the coarse particle-water mixtures in the horizontal and inclined pipe sections were significantly stratified. The particles moved principally in a layer close to the pipe invert. However, for higher and moderate flow velocities the particles moved also in the central part of the pipe cross-section, and particle saltation [1] was found to

  2. Equation of state of strongly coupled plasma mixtures

    International Nuclear Information System (INIS)

    DeWitt, H.E.

    1984-01-01

    Thermodynamic properties of strongly coupled (high density) plasmas of mixtures of light elements have been obtained by Monte Carlo simulations. For an assumed uniform charge background the equation of state of ionic mixtures is a simple extension of the one-component plasma EOS. More realistic electron screening effects are treated in linear response theory and with an appropriate electron dielectric function. Results have been obtained for the ionic pair distribution functions, and for the electric microfield distribution

  3. Extending Growth Mixture Models Using Continuous Non-Elliptical Distributions

    OpenAIRE

    Wei, Yuhong; Tang, Yang; Shireman, Emilie; McNicholas, Paul D.; Steinley, Douglas L.

    2017-01-01

    Growth mixture models (GMMs) incorporate both conventional random effects growth modeling and latent trajectory classes as in finite mixture modeling; therefore, they offer a way to handle the unobserved heterogeneity between subjects in their development. GMMs with Gaussian random effects dominate the literature. When the data are asymmetric and/or have heavier tails, more than one latent class is required to capture the observed variable distribution. Therefore, a GMM with continuous non-el...

  4. [Preparation of standard mixture of volatile organic compounds].

    Science.gov (United States)

    Shi, L; Han, K

    1999-01-30

    This article presented a simple, convenient and flexible device for the preparation of standard mixtures of VOCs. By the aid of a constant pressure on the surface of a liquid with specific composition of VOCs, the liquid passed through a long capillary tube at a definite flow rate. A standard VOCs source was thus formed. The mean relative standard deviation (RSD) of flow rate was 3%. As the outlet of capillary tube inserted in a stream of zero air, the components of liquid vaporized and eventually became a homogeneous gas mixture. The concentration of VOCs in the mixture varied with the pressure applied and the flow rate of dilution air. The mean RSD of concentration of total VOCs in the standard mixture determined by GC method was 5.7%, and the absolute error was 8%. No significient difference was found between the determined and calculated concentrations of the mixture. This method is suitable for preparation of standard mixtures of VOCs with boiling points lower than 150 degrees C.

  5. Detonation cell widths in hydrogen-air-diluent mixtures

    International Nuclear Information System (INIS)

    Stamps, D.W.

    1990-01-01

    In this paper I report on the influence of steam and carbon dioxide on the detonability of hydrogen-air mixtures. Data were obtained on the detonation cell width in a heated detonation tube that is 0.43 m in diameter and 13.1 m long. The detonation cell widths were correlated using a characteristic length calculated from a chemical kinetic model. The addition of either diluent to a hydrogen-air mixture increased the cell width for all equivalence ratios. For equal diluent concentrations, however, carbon dioxide not only yielded larger increases in the cell width than steam, but its efficacy relative to steam was predicted to increase with increasing concentration. The range of detonable hydrogen concentrations in a hydrogen-air mixture initially at 1 atm pressure was found to be between 11.6 percent and 74.9 percent for mixtures at 20 degree C and 9.4 percent and 76.9 percent for mixtures at 100 degree C. The detonation limit was between 38.8 percent and 40.5 percent steam for a stoichiometric hydrogen-air-steam mixture initially at 100 degree C and 1 atm. 10 refs., 4 figs., 1 tab

  6. A new correlation for nucleate pool boiling of aqueous mixtures

    International Nuclear Information System (INIS)

    Thome, J.R.; Shakir, S.

    1987-01-01

    A new mixture boiling correlation was developed for nucleate pool boiling of aqueous mixtures on plain, smooth tubes. The semi-empirical correlation models the rise in the local bubble point temperature in a mixture caused by the preferential evaporation of the more volatile component during bubble growth. This rise varies from zero at low heat fluxes (where only single-phase natural convection is present) up to nearly the entire boiling range at the peak heat flux (where latent heat transport is dominant). The boiling range, which is the temperature difference between the dew point and bubble point of a mixture, is used to characterize phase equilibrium effects. An exponential term models the rise in the local bubble point temperature as a function of heat flux. The correlation was compared against binary mixture boiling data for ethanol-water, methanol-water, n-propanol-water, and acetone-water. The majority of the data was predicted to within 20%. Further experimental research is currently underway to obtain multicomponent boiling data for aqueous mixtures with up to five components and for wider boiling ranges

  7. Isotopic analysis of H2, HD, D2 mixtures and analysis of ortho-para-hydrogen mixtures by gas chromatography

    International Nuclear Information System (INIS)

    Botter, F.; Perriere, G. de la; Tistchenko, S.

    1961-01-01

    This communication describes the present situation concerning the possibilities of vapor phase chromatography for the separation and analysis of mixtures of H 2 , HD and D 2 and of ortho- and para-hydrogen mixtures. Separation factors for physical adsorption of the various varieties of hydrogen have been deduced from chromatograms and have also been measured directly with a static method - the agreements is good. (author) [fr

  8. An Empirical Approach to Sufficient Similarity: Combining Exposure Data and Mixtures Toxicology Data

    Science.gov (United States)

    Marshall, Scott; Gennings, Chris; Teuschler, Linda K.; Stork, LeAnna G.; Tornero-Velez, Rogelio; Crofton, Kevin M.; Rice, Glenn E.

    2013-01-01

    When assessing risks posed by environmental chemical mixtures, whole mixture approaches are preferred to component approaches. When toxicological data on whole mixtures as they occur in the environment are not available, EPA guidance states that, toxicity data from a mixture considered “sufficiently similar” to the environmental mixture can serve as a surrogate. We propose a novel method to examine whether mixtures are sufficiently similar, when exposure data and mixture toxicity study data from at least one representative mixture are available. We define sufficient similarity using equivalence testing methodology comparing the distance between benchmark dose estimates for mixtures in both data rich and data poor cases. We construct a “similar mixtures risk indicator” (analogous to the hazard index) on sufficiently similar mixtures linking exposure data with mixtures toxicology data. The methods are illustrated using pyrethroid mixtures occurrence data collected in child care centers (CCC) and dose-response data examining acute neurobehavioral effects of pyrethroid mixtures in rats. Our method shows that the mixtures from 90% of the CCCs were sufficiently similar to the dose-response study mixture. Using exposure estimates for a hypothetical child, the 95th percentile of the (weighted) similar mixtures risk indicator (SMRI) for these sufficiently similar mixtures was 0.20 (i.e., where SMRI1, more concern). PMID:23398277

  9. PhD Dissertation Proposal - Introduction to Dark Mix Concept: Gamma Measurements of Capsule Mixture

    Energy Technology Data Exchange (ETDEWEB)

    Meaney, Kevin Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-06

    Presentation slides: Intro to Inertial Confinement Fusion; Types of Mixture in ICF capsules; Previous mixture experiments; Dark Mix Concept; Measuring Dark Mix with Gamma Cherenkov Detector; Dissertation Outline.

  10. Toxicity of a binary mixture on Daphnia magna: biological effects of uranium and selenium isolated and in mixture

    International Nuclear Information System (INIS)

    Zeman, F.

    2008-10-01

    Among the multiple substances that affect freshwater ecosystems, uranium and selenium are two pollutants found worldwide in the environment, alone and in mixture. The aim of this thesis work was to investigate the effect of uranium and selenium mixture on daphnia (Daphnia magna). Studying effects of a mixture requires the assessment of the effect of single substances. Thus, the first experiments were performed on single substance. Acute toxicity data were obtained: EC 50 48h = 0, 39±0, 04 mg.L -1 for uranium and EC 50 48h 1, 86±0, 85 mg.L -1 for selenium. Chronic effects were also studied. Data on fecundity showed an EC 10 reproduction of 14±7 μg. L -1 for uranium and of 215±25 μg. L -1 for selenium. Uranium-selenium mixture toxicity experiments were performed and revealed an antagonistic effect. This study further demonstrates the importance of taking into consideration different elements in binary mixture studies such as the choice of reference models (concentration addition or independent action), statistical method, time exposure and endpoints. Using integrated parameters like energy budget was shown to be an interesting way to better understand interactions. An approach including calculation of chemical speciation in the medium and bioaccumulation measurements in the organism permits assumptions to be made on the nature of possible interactions between mixture components (toxico-dynamic et toxico-kinetic interactions). (author)

  11. Heat transfer degradation during condensation of non-azeotropic mixtures

    Science.gov (United States)

    Azzolin, M.; Berto, A.; Bortolin, S.; Del, D., Col

    2017-11-01

    International organizations call for a reduction of the HFCs production and utilizations in the next years. Binary or ternary blends of hydroflourocarbons (HFCs) and hydrofluoroolefins (HFOs) are emerging as possible substitutes for high Global Warming Potential (GWP) fluids currently employed in some refrigeration and air-conditioning applications. In some cases, these mixtures are non-azeotropic and thus, during phase-change at constant pressure, they present a temperature glide that, for some blends, can be higher than 10 K. Such temperature variation during phase change could lead to a better matching between the refrigerant and the water temperature profiles in a condenser, thus reducing the exergy losses associated with the heat transfer process. Nevertheless, the additional mass transfer resistance which occurs during the phase change of zeotropic mixtures leads to a heat transfer degradation. Therefore, the design of a condenser working with a zeotropic mixture poses the problem of how to extend the correlations developed for pure fluids to the case of condensation of mixtures. Experimental data taken are very helpful in the assessment of design procedures. In the present paper, heat transfer coefficients have been measured during condensation of zeotropic mixtures of HFC and HFO fluids. Tests have been carried out in the test rig available at the Two Phase Heat Transfer Lab of University of Padova. During the condensation tests, the heat is subtracted from the mixture by using cold water and the heat transfer coefficient is obtained from the measurement of the heat flux on the water side, the direct measurements of the wall temperature and saturation temperature. Tests have been performed at 40°C mean saturation temperature. The present experimental database is used to assess predictive correlations for condensation of mixtures, providing valuable information on the applicability of available models.

  12. Dietary fiber mixture in pediatric patients with controlled chronic constipation.

    Science.gov (United States)

    Weber, Thabata K; Toporovski, Mauro S; Tahan, Soraia; Neufeld, Clarice B; de Morais, Mauro B

    2014-03-01

    The aim of the study was to test the clinical efficacy and effect on colonic transit time (CTT) of a dietary fiber mixture given to children with controlled chronic constipation (CC) after the withdrawal of stool softeners and enemas. This randomized, placebo-controlled, double-blind clinical trial involved 54 patients aged 4 to 12 years and had CC that was controlled by the use of low-dose stool softeners. The use of these softeners was discontinued when the patients were admitted to the clinical trial. The patients were randomized into 2 groups for the 4-week study period. One group received a dietary fiber mixture and the other group received a placebo (maltodextrin). The primary outcome was therapeutic failure (oral stool softeners or enemas was required to prescribe during the trial). Secondary outcomes included defecation frequency, stool consistency (measured using the Bristol Stool Form Scale), and CTT. Therapeutic failure was observed in 34.6% (9/26) of the patients in the dietary fiber mixture group and in 35.7% (10/28) in the control group (P = 0.933). The mean increase in daily bowel movements was 0.53 in the dietary fiber mixture group and 0.23 in the control group (P = 0.014). The patients in the dietary fiber mixture group (60.0%) passed nonhardened stools more frequently than did those in the control group (16.7%, P = 0.003). The CTT was similar for both groups. The fiber mixture did not prevent the suspension of stool softeners or lead to reduced CTT; however, the mixture promoted an increased frequency of defecation and an improvement in the stool consistency.

  13. Fission product release from core-concrete mixtures

    International Nuclear Information System (INIS)

    Roche, M.F.; Settle, J.; Leibowitz, L.; Johnson, C.E.; Ritzman, R.L.

    1988-01-01

    The objective of this research is to measure the amount of strontium, barium, and lanthanum that is vaporized from core-concrete mixtures. The measurements are being done using a transpiration method. Mixtures of limestone-aggregated concrete, urania doped with a small amount of La, Sr, Ba, and Zr oxides, and stainless steel were vaporized at 2150 K from a zirconia crucible into flowing He-6% H 2 -0.06% H 2 O (a partial molar free energy of oxygen of -420 kJ). The amounts that were vaporized was determined by weight change and by chemical analyses on condensates. The major phases present in the mixture were inferred from electron probe microanalysis (EPM). They were: (1) urania containing calcia and zirconia, (2) calcium zirconate, (3) a calcium magnesium silicate, and (4) magnesia. About 10% of the zirconia crucible was dissolved by the concrete-urania mixture during the experiment, which accounts for the presence of zirconia-containing major phases. To circumvent the problem of zirconia dissolution, we repeated the experiments using mixtures of the limestone-aggregate concrete and the doped urania in molybdenum crucibles. These studies show that thermodynamic calculations of the release of refractory fission products will yield release fractions that are a factor of sixteen too high if the effects of zirconate formation are ignored

  14. Bayesian Plackett-Luce Mixture Models for Partially Ranked Data.

    Science.gov (United States)

    Mollica, Cristina; Tardella, Luca

    2017-06-01

    The elicitation of an ordinal judgment on multiple alternatives is often required in many psychological and behavioral experiments to investigate preference/choice orientation of a specific population. The Plackett-Luce model is one of the most popular and frequently applied parametric distributions to analyze rankings of a finite set of items. The present work introduces a Bayesian finite mixture of Plackett-Luce models to account for unobserved sample heterogeneity of partially ranked data. We describe an efficient way to incorporate the latent group structure in the data augmentation approach and the derivation of existing maximum likelihood procedures as special instances of the proposed Bayesian method. Inference can be conducted with the combination of the Expectation-Maximization algorithm for maximum a posteriori estimation and the Gibbs sampling iterative procedure. We additionally investigate several Bayesian criteria for selecting the optimal mixture configuration and describe diagnostic tools for assessing the fitness of ranking distributions conditionally and unconditionally on the number of ranked items. The utility of the novel Bayesian parametric Plackett-Luce mixture for characterizing sample heterogeneity is illustrated with several applications to simulated and real preference ranked data. We compare our method with the frequentist approach and a Bayesian nonparametric mixture model both assuming the Plackett-Luce model as a mixture component. Our analysis on real datasets reveals the importance of an accurate diagnostic check for an appropriate in-depth understanding of the heterogenous nature of the partial ranking data.

  15. The use of gaseous fuels mixtures for SI engines propulsion

    Science.gov (United States)

    Flekiewicz, M.; Kubica, G.

    2016-09-01

    Paper presents results of SI engine tests, carried on for different gaseous fuels. Carried out analysis made it possible to define correlation between fuel composition and engine operating parameters. Tests covered various gaseous mixtures: of methane and hydrogen and LPG with DME featuring different shares. The first group, considered as low carbon content fuels can be characterized by low CO2 emissions. Flammability of hydrogen added in those mixtures realizes the function of combustion process activator. That is why hydrogen addition improves the energy conversion by about 3%. The second group of fuels is constituted by LPG and DME mixtures. DME mixes perfectly with LPG, and differently than in case of other hydrocarbon fuels consists also of oxygen makes the stoichiometric mixture less oxygen demanding. In case of this fuel an improvement in engine volumetric and overall engine efficiency has been noticed, when compared to LPG. For the 11% DME share in the mixture an improvement of 2% in the efficiency has been noticed. During the tests standard CNG/LPG feeding systems have been used, what underlines utility value of the research. The stand tests results have been followed by combustion process simulation including exhaust forming and charge exchange.

  16. A Statistical Approach to Optimizing Concrete Mixture Design

    Science.gov (United States)

    Alghamdi, Saeid A.

    2014-01-01

    A step-by-step statistical approach is proposed to obtain optimum proportioning of concrete mixtures using the data obtained through a statistically planned experimental program. The utility of the proposed approach for optimizing the design of concrete mixture is illustrated considering a typical case in which trial mixtures were considered according to a full factorial experiment design involving three factors and their three levels (33). A total of 27 concrete mixtures with three replicates (81 specimens) were considered by varying the levels of key factors affecting compressive strength of concrete, namely, water/cementitious materials ratio (0.38, 0.43, and 0.48), cementitious materials content (350, 375, and 400 kg/m3), and fine/total aggregate ratio (0.35, 0.40, and 0.45). The experimental data were utilized to carry out analysis of variance (ANOVA) and to develop a polynomial regression model for compressive strength in terms of the three design factors considered in this study. The developed statistical model was used to show how optimization of concrete mixtures can be carried out with different possible options. PMID:24688405

  17. Aluminium Morphological Modification by Nitrogen-Argon Mixture PIII

    International Nuclear Information System (INIS)

    Munnoz-Castro, A.E.; Valencia Alvarado, R.; Penna-Eguiluz, R.; Mercado-Cabrera, A.; Barocio, S.R.; Rodriguez-Mendez, B.G.; Lopez-Callejas, R.; Piedad-Beneitez, A. de la

    2011-01-01

    With incident fluences of ∼ 10 12 atoms/cm 2 aluminium samples have been plasma immersion ion implanted with either pure nitrogen or argon/nitrogen mixtures at temperatures around 450 o C. X-ray diffraction studies have validated the formation of the cubic phase of AlN, in samples treated with both the gas mixtures and pure nitrogen. Likewise, the presence of the hexagonal phase of AlN has been detected when either pure nitrogen or a 70% N/30% Ar mixture have been used. The signature peak of AlN has also been confirmed by the Raman spectroscopy. The maximal microhardness values were found in samples treated with the mixture. The maximal roughness was achieved with the equal part mixture in all cases, although increasing with the implantation pulse width up to a 300 nm peak at 150 μs. The latter critical value remains invariant under the pure nitrogen plasma treatment, provided that implantation periods in the order of 4.5 h are carried out. (author)

  18. Geoenvironmental behavior of foundry sand amended mixtures for highway subbases.

    Science.gov (United States)

    Guney, Yucel; Aydilek, Ahmet H; Demirkan, M Melih

    2006-01-01

    The high cost of landfilling and the potential uses of waste foundry sands have prompted research into their beneficial reuse. Roadways have a high potential for large volume usage of the foundry sands. A laboratory testing program was conducted on soil-foundry sand mixtures amended with cement and lime to assess their applicability as highway subbase materials. The mixtures were compacted in the laboratory at a variety of moisture contents and compactive efforts and subjected to unconfined compression, California bearing ratio, and hydraulic conductivity tests. The environmental suitability of the prepared mixtures was evaluated by analyzing the effluent collected during hydraulic conductivity tests. Finally, required subbase thicknesses were calculated using the laboratory-based strength parameters. The results of the study show that the strength of a mixture is highly dependent on the curing period, compactive energy, lime or cement presence, and water content at compaction. The resistance of foundry sand-based specimens to winter conditions is generally better than that of a typical subbase reference material. Laboratory leaching tests indicated that if these mixtures later come in contact with water that has been discharged directly to the environment (e.g., drainage through asphalt pavement), the quality of water will not be affected.

  19. PERFORMANCE PROPERTIES OF ASA POLYMER MODIFIED ASPHALT BINDERS AND MIXTURES

    Directory of Open Access Journals (Sweden)

    SHABAN ISMAEL ALBRKA

    2016-08-01

    Full Text Available Asphalt is commonly used as a binder in the construction of highways and runways, due to its good viscoelastic properties, natural asphalt cement does not have sufficient strength to resist sudden stresses of excessive loading or stress from low and high temperatures. Therefore, modification of asphalt is necessary in order to improve its material temperature sensitivity, adhesion, durability, oxidation and aging resistance. The property of base asphalt and polymer modified asphalt binders and mixtures has been characterized using the conventional tests and dynamic creep tests. It has been found that, the addition of Acrylate Styrene Acrylonhrtilrei (ASA polymer content has magnificent influence on the properties of the asphalt binders and mixtures. The temperature susceptibility of modified asphalt binders was reduced compared with base asphalt binder as the penetration increase and softening point decrease. The reduction in penetration was up to 69%, while the improvement in softening point was up to 19%. Moreover, it was approved from the storage stability test that, the ASA polymer has a great compatibility with asphalt binder up to 5% ASA. In addition, it was observe reduction in permanent deformation of modified asphalt mixtures with increase of modifier up to 5% ASA, which lead to better resistance to rutting at high temperatures, and the reduction was up to 36%. As a result, the modification of asphalt binder and mixture with ASA polymer can be considered a proper alternative technique to improve the properties of asphalt binder and mixture and 5% ASA was the optimum content of the modifier.

  20. In Vitro Digestibility of Rapeseed and Bovine Whey Protein Mixtures.

    Science.gov (United States)

    Joehnke, Marcel Skejovic; Rehder, Alina; Sørensen, Susanne; Bjergegaard, Charlotte; Sørensen, Jens Christian; Markedal, Keld Ejdrup

    2018-01-24

    Partial replacement of animal protein sources with plant proteins is highly relevant for the food industry, but potential effects on protein digestibility need to be established. In this study, the in vitro protein digestibility (IVPD) of four protein sources and their mixtures (50:50 w/w ratio) was investigated using a transient pepsin hydrolysis (1 h) followed by pancreatin (1 h). The protein sources consisted of napin-rich rapeseed (Brassica napus L.) protein concentrates (RPCs; RP1, RP2) prepared in pilot scale and major bovine whey proteins (WPs; α-LA, alpha-lactalbumin; β-LG, beta-lactoglobulin). IVPD of individual protein sources was higher for WPs compared to RPCs. The RP2/β-LG mixture resulted in an unexpected high IVPD equivalent to β-LG protein alone. Protein mixtures containing RP1 showed a new IVPD response type due to the negative influence of a high trypsin inhibitor activity (TIA) level. Improved IVPD of RP1 alone and in protein mixtures was obtained by lowering the TIA level using dithiothreitol (DTT). These results showed that napin-rich protein products prepared by appropriate processing can be combined with specific WPs in mixtures to improve the IVPD.

  1. Enhanced selective metal adsorption on optimised agroforestry waste mixtures.

    Science.gov (United States)

    Rosales, Emilio; Ferreira, Laura; Sanromán, M Ángeles; Tavares, Teresa; Pazos, Marta

    2015-04-01

    The aim of this work is to ascertain the potentials of different agroforestry wastes to be used as biosorbents in the removal of a mixture of heavy metals. Fern (FE), rice husk (RI) and oak leaves (OA) presented the best removal percentages for Cu(II) and Ni(II), Mn(II) and Zn(II) and Cr(VI), respectively. The performance of a mixture of these three biosorbents was evaluated, and an improvement of 10% in the overall removal was obtained (19.25mg/g). The optimum mixture proportions were determined using simplex-centroid mixture design method (FE:OA:RI=50:13.7:36.3). The adsorption kinetics and isotherms of the optimised mixture were fit by the pseudo-first order kinetic model and Langmuir isotherm. The adsorption mechanism was studied, and the effects of the carboxylic, hydroxyl and phenolic groups on metal-biomass binding were demonstrated. Finally, the recoveries of the metals using biomass were investigated, and cationic metal recoveries of 100% were achieved when acidic solutions were used. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Reuse of steel slag in bituminous paving mixtures.

    Science.gov (United States)

    Sorlini, Sabrina; Sanzeni, Alex; Rondi, Luca

    2012-03-30

    This paper presents a comprehensive study to evaluate the mechanical properties and environmental suitability of electric arc furnace (EAF) steel slag in bituminous paving mixtures. A variety of tests were executed on samples of EAF slag to characterize the physical, geometrical, mechanical and chemical properties as required by UNI EN specifications, focusing additionally on the volumetric expansion associated with hydration of free CaO and MgO. Five bituminous mixtures of aggregates for flexible road pavement were designed containing up to 40% of EAF slag and were tested to determine Marshall stability and indirect tensile strength. The leaching behaviour of slag samples and bituminous mixtures was evaluated according to the UNI EN leaching test. The tested slag showed satisfactory physical and mechanical properties and a release of pollutants generally below the limits set by the Italian code. Tests on volume stability of fresh materials confirmed that a period of 2-3 months is necessary to reduce effects of oxides hydration. The results of tests performed on bituminous mixtures with EAF slag were comparable with the performance of mixtures containing natural aggregates and the leaching tests provided satisfactory results. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Dynamics of water and hydrated gelatin in partially crystallized mixtures

    Science.gov (United States)

    Sasaki, K.; Panagopoulou, A.; Miyara, M.; Fujita, K.; Yamamoto, W.; Pissis, P.; Kyritsis, A.; Kita, R.; Shinyashiki, N.; Yagihara, S.

    2013-02-01

    Gelatin-water mixtures with gelatin concentrations in a range of 10 - 40 wt% were investigated by broadband dielectric spectroscopy measurements in wide frequency (1 mHz - 50 GHz) and temperature (113 - 298 K) ranges. Three dielectric relaxation processes were observed. The temperature dependences of the three relaxation processes observed for the gelatin-water mixtures are similar to those observed for the BSA-water mixtures. The fastest relaxation process is originated from the uncrystallized water (UCW) in hydration shell and its relaxation time is the same to that of the UCW in various uncrystallized binary water mixtures. The intermediate relaxation process is originated from ice and its temperature dependence of the relaxation time and strength resemble pure ice relaxation process especially above 240 K. The slowest relaxation process is originated from hydrated gelatin. The strength of the slowest relaxation process is large, and it is similar to that of the relaxation process of hydrated BSA. The characteristic property of the gelatin-water mixture is the change of the temperature dependences of the relaxation times of the UCW and hydrated gelatin at around 260 K, above which the melting of ice occurs.

  4. Microscopic structure of the hydrogen-xenon mixture

    Science.gov (United States)

    Senesi, R.; Nardone, M.; Ricci, F. P.; Ricci, M. A.; Soper, A. K.

    1997-09-01

    We report a neutron-diffraction study of the microscopic structure of the H2-Xe binary mixture in the Xe-rich phase, xXe=0.78, at T=283 K and P=170 bars, i.e., in the vicinity of the second-type gas-gas demixing surface. The site-site distribution functions are extracted employing the H-D isotopic substitution technique. We report also molecular-dynamics simulations for a mixture of equivalent Lennard-Jones (LJ) atoms. The experimental results are compared with previous ones obtained for the He-Xe and Ne-Xe mixtures, which show a first- and a second-type gas-gas transition, respectively. The general picture already suggested by the other two mixtures agrees also with the present results, although in this case the center-center distribution functions H2-H2 and H2-Xe are clearly modulated by the Xe-Xe correlations. In particular the features found in the distribution functions of the mixture suggest that the LJ potential model is not able to reproduce at a satisfactory level the H2-H2 and the H2-Xe correlation functions and that a (XeH4) chemical complex is present.

  5. Flash Points of Secondary Alcohol and n-Alkane Mixtures.

    Science.gov (United States)

    Esina, Zoya N; Miroshnikov, Alexander M; Korchuganova, Margarita R

    2015-11-19

    The flash point is one of the most important characteristics used to assess the ignition hazard of mixtures of flammable liquids. To determine the flash points of mixtures of secondary alcohols with n-alkanes, it is necessary to calculate the activity coefficients. In this paper, we use a model that allows us to obtain enthalpy of fusion and enthalpy of vaporization data of the pure components to calculate the liquid-solid equilibrium (LSE) and vapor-liquid equilibrium (VLE). Enthalpy of fusion and enthalpy of vaporization data of secondary alcohols in the literature are limited; thus, the prediction of these characteristics was performed using the method of thermodynamic similarity. Additionally, the empirical models provided the critical temperatures and boiling temperatures of the secondary alcohols. The modeled melting enthalpy and enthalpy of vaporization as well as the calculated LSE and VLE flash points were determined for the secondary alcohol and n-alkane mixtures.

  6. Cement mixtures containing copper tailings as an additive: durability properties

    Directory of Open Access Journals (Sweden)

    Obinna Onuaguluchi

    2012-12-01

    Full Text Available The effects of copper tailings as an additive, on some durability properties of cement mixtures were investigated. In each mixture, copper tailings addition levels by mass were 0%, 5% and 10%. Compared to the control samples, copper tailings blended pastes showed superior performance against autoclave expansion while insignificant decreases in sulfate resistance of mortars were observed. Copper tailings increased the water absorption and total permeable voids of concretes slightly. However, the compressive and flexural strengths of blended concretes were higher than those of the control samples. Similarly, improved resistance to acid attack and chloride penetration as the copper tailings content of concretes increased were also observed. Results further showed that the ASTM C 1202 rapid chloride permeability test may not be a valid indicator of chloride migration in mixtures containing conductive copper tailings. These results suggest that copper tailings can potentially enhance the durability properties of cement based materials.

  7. Stability and Volumetric Properties of Asphalt Mixture Containing Waste Plastic

    Directory of Open Access Journals (Sweden)

    Abd Kader Siti Aminah

    2017-01-01

    Full Text Available The objectives of this study are to determine the optimum bitumen content (OBC for every percentage added of waste plastics in asphalt mixtures and to investigate the stability properties of the asphalt mixtures containing waste plastic. Marshall stability and flow values along with density, air voids in total mix, voids in mineral aggregate, and voids filled with bitumen were determined to obtain OBC at different percentages of waste plastic, i.e., 4%, 6%, 8%, and 10% by weight of bitumen as additive. Results showed that the OBC for the plastic-modified asphalt mixtures at 4%, 6%, 8%, and 10% are 4.98, 5.44, 5.48, and 5.14, respectively. On the other hand, the controlled specimen’s shows better volumetric properties compared to plastic mixes. However, 4% additional of waste plastic indicated better stability than controlled specimen.

  8. Refractometry for quality control of anesthetic drug mixtures.

    Science.gov (United States)

    Stabenow, Jennifer M; Maske, Mindy L; Vogler, George A

    2006-07-01

    Injectable anesthetic drugs used in rodents are often mixed and further diluted to increase the convenience and accuracy of dosing. We evaluated clinical refractometry as a simple and rapid method of quality control and mixing error detection of rodent anesthetic or analgesic mixtures. Dilutions of ketamine, xylazine, acepromazine, and buprenorphine were prepared with reagent-grade water to produce at least 4 concentration levels. The refraction of each concentration then was measured with a clinical refractometer and plotted against the percentage of stock concentration. The resulting graphs were linear and could be used to determine the concentration of single-drug dilutions or to predict the refraction of drug mixtures. We conclude that refractometry can be used to assess the concentration of dilutions of single drugs and can verify the mixing accuracy of drug combinations when the components of the mixture are known and fall within the detection range of the instrument.

  9. Composition measurements of binary mixture droplets by rainbow refractometry.

    Science.gov (United States)

    Wilms, J; Weigand, B

    2007-04-10

    So far, refractive index measurements by rainbow refractometry have been used to determine the temperature of single droplets and ensembles of droplets. Rainbow refractometry is, for the first time, to the best of our knowledge, applied to measure composition histories of evaporating, binary mixture droplets. An evaluation method is presented that makes use of Airy theory and the simultaneous size measurement by Mie scattering imaging. The method further includes an empirical correction function for a certain diameter and refractive index range. The measurement uncertainty was investigated by numerical simulations with Lorenz-Mie theory. For the experiments, an optical levitation setup was used allowing for long measurement periods. Temperature measurements of single-component droplets at different temperature levels are shown to demonstrate the accuracy of rainbow refractometry. Measurements of size and composition histories of binary mixture droplets are presented for two different mixtures. Experimental results show good agreement with numerical results using a rapid-mixing model.

  10. Composition measurements of binary mixture droplets by rainbow refractometry

    International Nuclear Information System (INIS)

    Wilms, J.; Weigand, B.

    2007-01-01

    So far, refractive index measurements by rainbow refractometry have been used to determine the temperature of single droplets and ensembles of droplets. Rainbow refractometry is, for the first time, to the best of our knowledge, applied to measure composition histories of evaporating, binary mixture droplets. An evaluation method is presented that makes use of Airy theory and the simultaneous size measurement by Mie scattering imaging. The method further includes an empirical correction function for a certain diameter and refractive index range. The measurement uncertainty was investigated by numerical simulations with Lorenz-Mie theory. For the experiments, an optical levitation setup was used allowing for long measurement periods. Temperature measurements of single-component droplets at different temperature levels are shown to demonstrate the accuracy of rainbow refractometry. Measurements of size and composition histories of binary mixture droplets are presented for two different mixtures. Experimental results show good agreement with numerical results using a rapid-mixing model

  11. Evaluation of cell cytotoxic effect on herbal extracts mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Soo; Gwon, Hui Jeong; Choi, Bo Ram; Lim, Youn Mook; Nho, Young Chang [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2009-12-15

    Herbal extracts (HE) such as Houttuynia cordata Thunb., Eucommia ulimoides, Plantago asiatica var., Morus alba L., and Ulmus davidiana var., are known to suppress an atopic dermatitis like skin lesions. In this study, to evaluate the cell cytotoxicity effect on L929, HaCaT and HMC-1 cell by the HE, the herbs were extracted with distilled water (at 75 .deg. C) and then the HE mixtures were freeze-dried for 5 days and sterilized with {gamma}-rays. The cytotoxicity was measured by Cell Counting Kit-8 (CCK-8) assay. The result showed that the HE mixtures did not significantly affect cell viability and had no toxicity on the cells. These findings indicate that the HE mixtures can be used as a potential therapeutic agent.

  12. Malabsorption of fructose-sorbitol mixtures. Interactions causing abdominal distress

    DEFF Research Database (Denmark)

    Rumessen, J J; Gudmand-Høyer, E

    1987-01-01

    Hydrogen breath tests were performed on 10 healthy adults after they had ingested a mixture of sorbitol and fructose, in which these substances were present in amounts corresponding to the individual absorption capacities. A significant malabsorption of this mixture was evident in 7 of 10 subjects......, but given as sucrose, and a similar amount of sorbitol was further given to four of the seven subjects showing malabsorption of the fructose-sorbitol mixture. Malabsorption now failed to appear, and symptoms were absent. These findings are of potential importance for the understanding of the physiologic...... processes involved in fructose absorption and suggest that in healthy adults the presence of sorbitol interferes with fructose absorption and/or vice versa. An interaction between small amounts of fructose and sorbitol causing malabsorption and abdominal distress has not been demonstrated previously...

  13. Segregation in inclined flows of binary mixtures of spheres

    Directory of Open Access Journals (Sweden)

    Larcher Michele

    2017-01-01

    Full Text Available We outline the equations that govern the evolution of segregation of a binary mixture of spheres in flows down inclines. These equations result from the mass and momentum balances of a kinetic theory for dense flows of inelastic spheres that interact through collisions. The theory employed for segregation is appropriate for particles with relatively small differences in size and mass. The flow of the mixture is assumed to reach a fully developed state much more rapidly than does the concentrations of the two species. We illustrate the predictions of the theory for a mixture of spheres of the same diameter but different masses and for spheres of different diameters but nearly the same mass. We show the evolution of the profiles of the concentration fractions of the two types of spheres and the profiles in the final, steady state. The latter compare favourably with those obtained in discrete-element numerical simulations.

  14. A classification system for tableting behaviors of binary powder mixtures

    Directory of Open Access Journals (Sweden)

    Changquan Calvin Sun

    2016-08-01

    Full Text Available The ability to predict tableting properties of a powder mixture from individual components is of both fundamental and practical importance to the efficient formulation development of tablet products. A common tableting classification system (TCS of binary powder mixtures facilitates the systematic development of new knowledge in this direction. Based on the dependence of tablet tensile strength on weight fraction in a binary mixture, three main types of tableting behavior are identified. Each type is further divided to arrive at a total of 15 sub-classes. The proposed classification system lays a framework for a better understanding of powder interactions during compaction. Potential applications and limitations of this classification system are discussed.

  15. Irradiation controlpathogens in mixture of blanched peanut and celery

    International Nuclear Information System (INIS)

    Li Shurong; Gao Meixu; Li Chunhong

    2007-01-01

    The effects of irradiation on microbiological, nutrient and sensory qualities of blanched peanut and celery mixture stored at commercial condition and D 10 values of pathogens of Listeria innocua and Salmonella enteritidis were investigated. Results showed that D 10 values of Salmonella enteritidis and Listeria innocua inoculated mixture of blanched celery and peanut were 0.284 and 0.296 kGy, respectively. Irradiation at dose lower than 2.0kGy have no significant effects on sensory qualities, content of crude protein and amino acid (p>0.05), and decrease 2-3 log of microbial in the mixture blanched peanut and celery and above 6 log of pathogens of Listeria innocua and Salmonella enteritidis inoculated. 2.0 kGy might be the optimum dose to ensure the hygienic quality of products. (authors)

  16. Laboratory Mix Design of Asphalt Mixture Containing Reclaimed Material

    Directory of Open Access Journals (Sweden)

    Davide Lo Presti

    2014-01-01

    Full Text Available This paper presents a study on the production of asphalt test specimens in the laboratory containing reclaimed asphalt. The mixtures considered were stone mastic asphalt concrete mixtures containing up to 30% of reclaimed asphalt. Specimens were compacted to the reference density obtained from the Marshall mix design. Gyration compaction method was used for preparing specimens for the experimental programme, while coring and cutting methods and X-ray computed tomography (CT were used to investigate the change in properties within the specimens and to validate the selected methodology. The study concluded that gyratory compaction is suitable to produce homogeneous test specimens also for mixtures containing high amount of reclaimed asphalt. Nevertheless, preliminary trials for each material are mandatory, as well as final coring and trimming of the specimens due to side effects.

  17. Verifying reciprocal relations for experimental diffusion coefficients in multicomponent mixtures

    DEFF Research Database (Denmark)

    Medvedev, Oleg; Shapiro, Alexander

    2003-01-01

    into Onsager coefficients and a subsequent symmetry check make it possible to evaluate different thermodynamic models with regard to their possibility of being used for prediction of the transport properties. We performed several checks of this kind for ternary mixtures of hydrocarbons and alcohols, where......The goal of the present study is to verify the agreement of the available data on diffusion in ternary mixtures with the theoretical requirement of linear non-equilibrium thermodynamics consisting in symmetry of the matrix of the phenomenological coefficients. A common set of measured diffusion...... diffusion coefficients into Onsager coefficients for a non-ideal mixture involves derivatives of the chemical potentials and, thus, should be based on a certain thermodynamic model (cubic equation of state (EoS), an activity coefficient model, etc.). Transformation of the Fickian diffusion coefficients...

  18. Tools and perspectives for assessing chemical mixtures and multiple stressors

    DEFF Research Database (Denmark)

    Løkke, Hans; Ragas, Ad M. J.; Holmstrup, Martin

    2013-01-01

    The present paper summarizes the most important insights and findings of the EU NoMiracle project with a focus on (1) risk assessment of chemical mixtures, (2) combinations of chemical and natural stressors, and (3) the receptor-oriented approach in cumulative risk assessment. The project aimed...... at integration of methods for human and ecological risk assessment. A mechanistically based model, considering uptake and toxicity as a processes in time, has demonstrated considerable potential for predicting mixture effects in ecotoxicology, but requires the measurement of toxicity endpoints at different...... moments in time. Within a novel framework for risk assessment of chemical mixtures, the importance of environmental factors on toxicokinetic processes is highlighted. A new paradigm for applying personal characteristics that determine individual exposure and sensitivity in human risk assessment...

  19. Microwave Determination of Water Mole Fraction in Humid Gas Mixtures

    Science.gov (United States)

    Cuccaro, R.; Gavioso, R. M.; Benedetto, G.; Madonna Ripa, D.; Fernicola, V.; Guianvarc'h, C.

    2012-09-01

    A small volume (65 cm3) gold-plated quasi-spherical microwave resonator has been used to measure the water vapor mole fraction x w of H2O/N2 and H2O/air mixtures. This experimental technique exploits the high precision achievable in the determination of the cavity microwave resonance frequencies and is particularly sensitive to the presence of small concentrations of water vapor as a result of the high polarizability of this substance. The mixtures were prepared using the INRIM standard humidity generator for frost-point temperatures T fp in the range between 241 K and 270 K and a commercial two-pressure humidity generator operated at a dew-point temperature between 272 K and 291 K. The experimental measurements compare favorably with the calculated molar fractions of the mixture supplied by the humidity generators, showing a normalized error lower than 0.8.

  20. Structural features of coke obtained from mixtures of various compositions

    Energy Technology Data Exchange (ETDEWEB)

    Gromova, O.B.; Syskov, K.I.; Mikhailets, S.N.; Gromov, V.E.; Sukhov, Yu.K.

    1985-11-01

    Fundamental aspects are examined for sorptional theory of coking by exposing structural features of coke obtained from charges of varying quantitative proportions of leaning (fillers) and caking (binding) components. Test samples of binding coke (fat coal) and its mixtures with fillers were studied. The samples were boiled with a mixture of xylene and colophony and then freshly spalled so that bonding coke surfaces could be prepared. Microscopic nonuniformity of substances under investigation was taken into consideration during analysis of the results. All varieties of the substance were studied in order to obtain statistically averaged characteristics. It was found that the addition of fillers to the mixture increases the size of structural globular constituents of coke. 6 references.

  1. Mixture reduction algorithms for target tracking in clutter

    Science.gov (United States)

    Salmond, David J.

    1990-10-01

    The Bayesian solution of the problem of tracking a target in random clutter gives rise to Gaussian mixture distributions, which are composed of an ever increasing number of components. To implement such a tracking filter, the growth of components must be controlled by approximating the mixture distribution. A popular and economical scheme is the Probabilistic Data Association Filter (PDAF), which reduces the mixture to a single Gaussian component at each time step. However this approximation may destroy valuable information, especially if several significant, well spaced components are present. In this paper, two new algorithms for reducing Gaussian mixture distributions are presented. These techniques preserve the mean and covariance of the mixture, and the fmal approximation is itself a Gaussian mixture. The reduction is achieved by successively merging pairs of components or groups of components until their number is reduced to some specified limit. Further reduction will then proceed while the approximation to the main features of the original distribution is still good. The performance of the most economical of these algorithms has been compared with that of the PDAF for the problem of tracking a single target which moves in a plane according to a second order model. A linear sensor which measures target position is corrupted by uniformly distributed clutter. Given a detection probability of unity and perfect knowledge of initial target position and velocity, this problem depends on only tw‡ non-dimensional parameters. Monte Carlo simulation has been employed to identify the region of this parameter space where significant performance improvement is obtained over the PDAF.

  2. Prospective aquatic risk assessment for chemical mixtures in agricultural landscapes

    Science.gov (United States)

    Brown, Colin D.; Hamer, Mick; Jones, Russell; Maltby, Lorraine; Posthuma, Leo; Silberhorn, Eric; Teeter, Jerold Scott; Warne, Michael St J; Weltje, Lennart

    2018-01-01

    Abstract Environmental risk assessment of chemical mixtures is challenging because of the multitude of possible combinations that may occur. Aquatic risk from chemical mixtures in an agricultural landscape was evaluated prospectively in 2 exposure scenario case studies: at field scale for a program of 13 plant‐protection products applied annually for 20 yr and at a watershed scale for a mixed land‐use scenario over 30 yr with 12 plant‐protection products and 2 veterinary pharmaceuticals used for beef cattle. Risk quotients were calculated from regulatory exposure models with typical real‐world use patterns and regulatory acceptable concentrations for individual chemicals. The results could differentiate situations when there was concern associated with single chemicals from those when concern was associated with a mixture (based on concentration addition) with no single chemical triggering concern. Potential mixture risk was identified on 0.02 to 7.07% of the total days modeled, depending on the scenario, the taxa, and whether considering acute or chronic risk. Taxa at risk were influenced by receiving water body characteristics along with chemical use profiles and associated properties. The present study demonstrates that a scenario‐based approach can be used to determine whether mixtures of chemicals pose risks over and above any identified using existing approaches for single chemicals, how often and to what magnitude, and ultimately which mixtures (and dominant chemicals) cause greatest concern. Environ Toxicol Chem 2018;37:674–689. © 2017 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC. PMID:29193235

  3. Third sound in mixtures of helium-3 and helium-4

    International Nuclear Information System (INIS)

    Downs, J.L.

    1975-01-01

    Third sound (surface wave) velocities have been measured at temperatures of 1.205, 1.400, and 1.601 K in thin adsorbed films of 3 He-- 4 He mixtures of four concentrations. The molar concentrations of the overall mixtures, including both the film and vapor phases, were 20.254 percent, 39.907 percent, 64.968 percent, and 84.686 percent. The results of these measurements are generally consistent with a new theory of third sound in mixtures, in which the changes in velocity from that in the case of pure 4 He are shown to result from two factors. A decrease in the superfluid density in the mixture, which is enhanced by an increase in the superfluid healing length, tends to cause a reduction in the velocity, which is sometimes dominant for very thin films. An increase in the restoring force resulting from osmotic pressure in the mixture (in addition to Van der Waals forces) causes an increase in the velocity, which is dominant for thicker films. Other characteristics of third sound in mixtures are an increase in the onset thickness and an increase in the attenuation from those observed in pure 4 He. New measurements of third sound velocities in films of pure 4 He have also been made, with emphasis on very thin films near the onset thickness. The onset of third sound was seen to occur at less than the maximum velocity, and dispersion has been observed in very thin films which is qualitatively in agreement with theory

  4. Exploring the Fate of Nitrogen Heterocycles in Complex Prebiotic Mixtures

    Science.gov (United States)

    Smith, Karen E.; Callahan, Michael P.; Cleaves, Henderson J.; Dworkin, Jason P.; House, Christopher H.

    2011-01-01

    A long standing question in the field of prebiotic chemistry is the origin of the genetic macromolecules DNA and RNA. DNA and RNA have very complex structures with repeating subunits of nucleotides, which are composed of nucleobases (nitrogen heterocycles) connected to sugar-phosphate. Due to the instability of some nucleobases (e.g. cytosine), difficulty of synthesis and instability of D-ribose, and the likely scarcity of polyphosphates necessary for the modern nucleotides, alternative nucleotides have been proposed for constructing the first genetic material. Thus, we have begun to investigate the chemistry of nitrogen heterocycles in plausible, complex prebiotic mixtures in an effort to identify robust reactions and potential alternative nucleotides. We have taken a complex prebiotic mixture produced by a spark discharge acting on a gas mixture of N2, CO2, CH4, and H2, and reacted it with four nitrogen heterocycles: uracil, 5-hydroxymethyluracil, guanine, and isoxanthopterin (2-amino-4,7-dihydroxypteridine). The products of the reaction between the spark mixture and each nitrogen heterocycle were characterized by liquid chromatography coupled to UV spectroscopy and Orbitrap mass spectrometry. We found that the reaction between the spark mixtUl'e and isoxanthopterin formed one major product, which was a cyanide adduct. 5-hydroxymethyluracil also reacted with the spark mixture to form a cyanide adduct, uracil-5-acetonitrile, which has been synthesized previously by reacting HCN with S-hydroxymethyluracil. Unlike isoxanthopterin, the chromatogram of the 5-hydroxymethyluracil reaction was much more complex with multiple products including spark-modified dimers. Additionally, we observed that HMU readily self-polymerizes in solution to a variety of oligomers consistent with those suggested by Cleaves. Guanine and uracil, the biological nucleobases, did not react with the spark mixture, even at high temperature (100 C). This suggests that there are alternative

  5. Solvation of hydrocarbons in aqueous-organic mixtures

    International Nuclear Information System (INIS)

    Sedov, I.A.; Magsumov, T.I.; Solomonov, B.N.

    2016-01-01

    Highlights: • Thermodynamic functions of solvation in mixtures of water with acetone and acetonitrile are measured at T = 298.15 K. • Solvation of n-octane and toluene in aqueous-organic mixtures is studied. • When increasing water content, Gibbs free energies grow up steadily, while enthalpies have a maximum. • Hydrocarbons are preferentially solvated with organic cosolvent even in mixtures with rather high water content. • Acetonitrile suppresses the hydrophobic effect less than acetone. - Abstract: We study the solvation of two hydrocarbons, n-octane and toluene, in binary mixtures of water with organic cosolvents. Two polar aprotic cosolvents that are miscible with water in any proportions, acetonitrile and acetone, were considered. We determine the magnitudes of thermodynamic functions of dissolution and solvation at T = 298.15 K in the mixtures with various compositions. Solution calorimetry was used to measure the enthalpies of solution, and GC headspace analysis was applied to obtain limiting activity coefficients of solutes in the studied systems. For the first time, the enthalpies of solution of alkane in the mixtures with high water content were measured directly. We observed well-pronounced maxima of the dependencies of enthalpies of solvation from the composition of solvent and no maxima for the Gibbs free energies of solvation. Two factors are concluded to be important to explain the observed tendencies: high energy cost of reorganization of binary solvent upon insertion of solute molecules and preferential surrounding of hydrocarbons with the molecules of organic cosolvent. Enthalpy-entropy compensation leads to a steady growth of the Gibbs free energies with increasing water content. On the other hand, consideration of the plots of the Gibbs free energy against enthalpy of solvation clearly shows that the solvation properties are changed dramatically after addition of a rather small amount of organic cosolvents. It is shown that they

  6. Measurements of local mixture fraction of reacting mixture in swirl-stabilised natural gas-fuelled burners

    Science.gov (United States)

    Orain, M.; Hardalupas, Y.

    2011-11-01

    Local, time-dependent measurements of mixture fraction of the reacting mixture were obtained in a swirl-stabilised natural gas-fuelled, nominally non-premixed burner using the intensity of chemiluminescence from OH∗ and CH∗ radicals. The measurements quantified the mean, rms of fluctuations and probability density functions of local mixture fraction at the stabilisation region of the flame. In addition, the probability of flame presence and the degree of lean or rich versus stoichiometric reaction is reported. The burner was operated for three air flow Reynolds numbers (Re=18970, 29100 and 57600), at an overall equivalence ratio of 0.32, without and with imposed oscillations to the air flow of the burner at the resonance frequency of 350 Hz. Results show that combustion occurred in a partially premixed mode for all flow conditions, although fuel and air were injected separately in the reaction zone. The mean local mixture fraction was nearly stoichiometric at the base of the flame without imposed air oscillations, but with large fluctuations leading to around 80% of lean or rich reaction. The degree of non-stoichiometric reaction increased with axial distance from the burner exit and Reynolds number and lean reaction dominated. Imposed air oscillations led to lifted flames and increased the degree of non-stoichiometric reaction for Re=18970 and 29100, whereas the flame remained attached onto the injector for Re=57600 and little modification of the mixture fraction was observed.

  7. 7 CFR 201.12a - Lawn and turf seed mixtures.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Lawn and turf seed mixtures. 201.12a Section 201.12a... REGULATIONS Labeling Agricultural Seeds § 201.12a Lawn and turf seed mixtures. Seed mixtures intended for lawn and turf purposes shall be designated as a mixture on the label and each seed component shall be...

  8. 9 CFR 318.13 - Mixtures containing product but not amendable to the Act.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Mixtures containing product but not... PREPARATION OF PRODUCTS General § 318.13 Mixtures containing product but not amendable to the Act. Mixtures... provided for in part 350 of subchapter B of this chapter. When such mixtures are manufactured in any part...

  9. 40 CFR 716.45 - How to report on substances and mixtures.

    Science.gov (United States)

    2010-07-01

    ... mixtures. 716.45 Section 716.45 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... substances and mixtures. Section 716.120 lists substances and mixtures, in order by Chemical Abstract Service Registry Number and by alphabetical order. Studies of listed substances and listed mixtures shall be...

  10. 21 CFR 80.35 - Color additive mixtures; certification and exemption from certification.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Color additive mixtures; certification and... additive mixtures; certification and exemption from certification. (a) Color additive mixtures to be certified. Any color additive mixture that contains one or more straight colors listed in part 74 of this...

  11. Mixtures of Strongly Interacting Bosons in Optical Lattices

    International Nuclear Information System (INIS)

    Buonsante, P.; Penna, V.; Giampaolo, S. M.; Illuminati, F.; Vezzani, A.

    2008-01-01

    We investigate the properties of strongly interacting heteronuclear boson-boson mixtures loaded in realistic optical lattices, with particular emphasis on the physics of interfaces. In particular, we numerically reproduce the recent experimental observation that the addition of a small fraction of 41 K induces a significant loss of coherence in 87 Rb, providing a simple explanation. We then investigate the robustness against the inhomogeneity typical of realistic experimental realizations of the glassy quantum emulsions recently predicted to occur in strongly interacting boson-boson mixtures on ideal homogeneous lattices

  12. Inorganic salt mixtures as electrolyte media in fuel cells

    Science.gov (United States)

    Angell, Charles Austen (Inventor); Belieres, Jean-Philippe (Inventor); Francis-Gervasio, Dominic (Inventor)

    2012-01-01

    Fuel cell designs and techniques for converting chemical energy into electrical energy uses a fuel cell are disclosed. The designs and techniques include an anode to receive fuel, a cathode to receive oxygen, and an electrolyte chamber in the fuel cell, including an electrolyte medium, where the electrolyte medium includes an inorganic salt mixture in the fuel cell. The salt mixture includes pre-determined quantities of at least two salts chosen from a group consisting of ammonium trifluoromethanesulfonate, ammonium trifluoroacetate, and ammonium nitrate, to conduct charge from the anode to the cathode. The fuel cell includes an electrical circuit operatively coupled to the fuel cell to transport electrons from the cathode.

  13. Phase Behavior of Mixtures of Ionic Liquids and Organic Solvents

    DEFF Research Database (Denmark)

    Abildskov, Jens; Ellegaard, Martin Dela; O’Connell, J.P.

    2010-01-01

    are implemented, leading to an entirely predictive method for densities of mixed compressed ionic liquids. Quantitative agreement with experimental data is obtained over wide ranges of conditions. Previously, the method has been applied to solubilities of sparingly soluble gases in ionic liquids and in organic......A corresponding-states form of the generalized van der Waals equation, previously developed for mixtures of an ionic liquid and a supercritical solute, is here extended to mixtures including an ionic liquid and a solvent (water or organic). Group contributions to characteristic parameters...... solvents. Here we show results for heavier and more-than-sparingly solutes such as carbon dioxide and propane in ionic liquids....

  14. Detonability of H2-air-diluent mixtures

    International Nuclear Information System (INIS)

    Tieszen, S.R.; Sherman, M.P.; Benedick, W.B.; Berman, M.

    1987-06-01

    This report describes the Heated Detonation Tube (HDT). Detonation cell width and velocity results are presented for H 2 -air mixtures, undiluted and diluted with CO 2 and H 2 O for a range of H 2 concentration, initial temperature and pressure. The results show that the addition of either CO 2 or H 2 O significantly increases the detonation cell width and hence reduces the detonability of the mixture. The results also show that the detonation cell width is reduced (detonability is increased) for increased initial temperature and/or pressure

  15. Application of association models to mixtures containing alkanolamines

    DEFF Research Database (Denmark)

    Avlund, Ane Søgaard; Eriksen, Daniel Kunisch; Kontogeorgis, Georgios

    2011-01-01

    . The role of association schemes is investigated in connection with CPA, while for sPC-SAFT emphasisis given on the role of different types of data in the determination of pure compound parameters suitable for mixture calculations. Moreover, the performance of CPA and sPC-SAFT for MEA-containing systems...... is compared.The investigation showed that vapor pressures and liquid densities were not sufficient for obtaining reliable parameters with either CPA or sPC-SAFT, but that at least one other type of information is needed. LLE data for a binary mixture of the associating component with an inert compound is very...

  16. Self-compacting concrete mixtures for road BUILDING

    Directory of Open Access Journals (Sweden)

    Tran Tuan My

    2012-10-01

    Therefore, effective concrete road pavements require self-compacting though non-segregating concrete mixtures to comply with the pre-set values of their properties, namely, bending and compressive strength, corrosion resistance, freeze resistance, etc. Acting in cooperation with Department of Technology of Binders and Concretes of MSUCE, NIIMosstroy developed and examined a self-compacting cast concrete mixture designated for durable monolithic road pavements. The composition in question was generated by adding a multi-component modifier into the mix. The modifier was composed of a hyperplasticiser, active (structureless fine and crystalline silica, and a concrete hardening control agent.

  17. Perturbation of the Maxwellian distribution in chemically reacting gas mixtures

    Science.gov (United States)

    Alekseyev, B. V.; Yanovskiy, V. R.

    1972-01-01

    Chemically reacting gas mixtures are considered for the case in which inelastic collisions occur significantly less frequently than elastic ones. The first approximation of the general solution of the Boltzmann equation is developed and is shown to contain an additional scaler term. The concentration, the mean mass velocity, and the temperature of the mixture are determined and the rate of reaction in the first approximation is formulated. Tables are presented which give reaction rate values obtained by both the first and second approximation for different activation energies. The tables show that the first approximation is sufficient for practical purposes for calculating the reaction rate.

  18. Concrete mixtures with high-workability for ballastless slab tracks

    Directory of Open Access Journals (Sweden)

    Olga Smirnova

    2017-10-01

    Full Text Available The concrete track-supporting layer and the monolithic concrete slab of ballastless track systems are made in-situ. For this reason the concrete mixtures of high workability should be used. Influence of the sand kind, the quartz microfiller fineness and quantity as well as quantity of superplasticizer on workability of fresh concrete and durability of hardened concrete is shown. The compositions of the high-workability concrete mixtures with lower consumption of superplasticizer are developed. The results of the research can be recommended for high performance concrete of ballastless slab track.

  19. Theory of amorphous packings of binary mixtures of hard spheres.

    Science.gov (United States)

    Biazzo, Indaco; Caltagirone, Francesco; Parisi, Giorgio; Zamponi, Francesco

    2009-05-15

    We extend our theory of amorphous packings of hard spheres to binary mixtures and more generally to multicomponent systems. The theory is based on the assumption that amorphous packings produced by typical experimental or numerical protocols can be identified with the infinite pressure limit of long-lived metastable glassy states. We test this assumption against numerical and experimental data and show that the theory correctly reproduces the variation with mixture composition of structural observables, such as the total packing fraction and the partial coordination numbers.

  20. Microbial comparative pan-genomics using binomial mixture models

    DEFF Research Database (Denmark)

    Ussery, David; Snipen, L; Almøy, T

    2009-01-01

    The size of the core- and pan-genome of bacterial species is a topic of increasing interest due to the growing number of sequenced prokaryote genomes, many from the same species. Attempts to estimate these quantities have been made, using regression methods or mixture models. We extend the latter...... occurring genes in the population. CONCLUSION: Analyzing pan-genomics data with binomial mixture models is a way to handle dependencies between genomes, which we find is always present. A bottleneck in the estimation procedure is the annotation of rarely occurring genes....

  1. Low temperature catalytic combustion of natural gas - hydrogen - air mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Newson, E.; Roth, F. von; Hottinger, P.; Truong, T.B. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    The low temperature catalytic combustion of natural gas - air mixtures would allow the development of no-NO{sub x} burners for heating and power applications. Using commercially available catalysts, the room temperature ignition of methane-propane-air mixtures has been shown in laboratory reactors with combustion efficiencies over 95% and maximum temperatures less than 700{sup o}C. After a 500 hour stability test, severe deactivation of both methane and propane oxidation functions was observed. In cooperation with industrial partners, scaleup to 3 kW is being investigated together with startup dynamics and catalyst stability. (author) 3 figs., 3 refs.

  2. Cytotoxic Isobractatin (Prenylated Xanthone Epimer Mixture of Garcinia eugenifolia

    Directory of Open Access Journals (Sweden)

    Sri Hartati

    2014-10-01

    Full Text Available In search of bioactive anti-cancer compounds from natural products has been found isobractatin from n-hexane extract of Garcinia eugenifolia. Isolation was done through the stages of maceration and column chromatography. Elucidation of the structure was analyzed by spectroscopy of UV-Vis, FTIR, LC-MS, NMR proton and carbon one and two dimension data. The results found three compounds isolated from G. eugenifolia. The three compounds were stigmasterol, prenylated xanthone isobractatin and its epimer (in a mixture. The mixture of isobractatin and its epimer showed cytotoxic activity against breast cancer cell line T47D with IC50 = 17 µg/mL.

  3. Probabilistic expert systems for handling artifacts in complex DNA mixtures.

    Science.gov (United States)

    Cowell, R G; Lauritzen, S L; Mortera, J

    2011-06-01

    This paper presents a coherent probabilistic framework for taking account of allelic dropout, stutter bands and silent alleles when interpreting STR DNA profiles from a mixture sample using peak size information arising from a PCR analysis. This information can be exploited for evaluating the evidential strength for a hypothesis that DNA from a particular person is present in the mixture. It extends an earlier Bayesian network approach that ignored such artifacts. We illustrate the use of the extended network on a published casework example. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  4. Blind separation of more sources than sensors in convolutive mixtures

    DEFF Research Database (Denmark)

    Olsson, Rasmus Kongsgaard; Hansen, Lars Kai

    2006-01-01

    We demonstrate that blind separation of more sources than sensors can be performed based solely on the second order statistics of the observed mixtures. This a generalization of well-known robust algorithms that are suited for equal number of sources and sensors. It is assumed that the sources...... are non-stationary and sparsely distributed in the time-frequency plane. The mixture model is convolutive, i.e. acoustic setups such as the cocktail party problem are contained. The limits of identifiability are determined in the framework of the PARAFAC model. In the experimental section...

  5. Partial structure factors in star polymer/colloid mixtures

    CERN Document Server

    Stellbrink, J; Richter, D; Moussaid, A; Schofield, A B; Poon, W C K; Pusey, P N; Lindner, P; Dzubiella, J; Likos, C N; Löwen, H

    2002-01-01

    Addition of polymer to colloidal suspensions induces an attractive part to the colloid pair potential, which is of purely entropic origin (''depletion interaction''). We investigated the influence of polymer branching on depletion forces by studying mixtures of hard sphere colloids and star polymers with increasing arm number f=2-32, but constant R sub g approx 500 A. We found a pronounced effect of branching on the position of the gas/liquid demixing transition. Using small angle neutron scattering (SANS) we were able to measure partial structure factors in star polymer/colloid mixtures. The relative distance to the demixing transition is reflected in our scattering data. (orig.)

  6. Monaural ICA of white noise mixtures is hard

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Petersen, Kaare Brandt

    2003-01-01

    Separation of monaural linear mixtures of `white' source signals is fundamentally ill-posed. In some situations it is not possible to find the mixing coefficients for the full `blind' problem. If the mixing coefficients are known, the structure of the source prior distribution determines the sour...... of white noise signals and give a set of `no go' cases.......Separation of monaural linear mixtures of `white' source signals is fundamentally ill-posed. In some situations it is not possible to find the mixing coefficients for the full `blind' problem. If the mixing coefficients are known, the structure of the source prior distribution determines the source...

  7. Identifying Clusters with Mixture Models that Include Radial Velocity Observations

    Science.gov (United States)

    Czarnatowicz, Alexis; Ybarra, Jason E.

    2018-01-01

    The study of stellar clusters plays an integral role in the study of star formation. We present a cluster mixture model that considers radial velocity data in addition to spatial data. Maximum likelihood estimation through the Expectation-Maximization (EM) algorithm is used for parameter estimation. Our mixture model analysis can be used to distinguish adjacent or overlapping clusters, and estimate properties for each cluster.Work supported by awards from the Virginia Foundation for Independent Colleges (VFIC) Undergraduate Science Research Fellowship and The Research Experience @Bridgewater (TREB).

  8. Asymptotic Limits for Transport in Binary Stochastic Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Prinja, A. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-05-01

    The Karhunen-Loeve stochastic spectral expansion of a random binary mixture of immiscible fluids in planar geometry is used to explore asymptotic limits of radiation transport in such mixtures. Under appropriate scalings of mixing parameters - correlation length, volume fraction, and material cross sections - and employing multiple- scale expansion of the angular flux, previously established atomic mix and diffusion limits are reproduced. When applied to highly contrasting material properties in the small cor- relation length limit, the methodology yields a nonstandard reflective medium transport equation that merits further investigation. Finally, a hybrid closure is proposed that produces both small and large correlation length limits of the closure condition for the material averaged equations.

  9. Mixture and method for simulating soiling and weathering of surfaces

    Science.gov (United States)

    Sleiman, Mohamad; Kirchstetter, Thomas; Destaillats, Hugo; Levinson, Ronnen; Berdahl, Paul; Akbari, Hashem

    2018-01-02

    This disclosure provides systems, methods, and apparatus related to simulated soiling and weathering of materials. In one aspect, a soiling mixture may include an aqueous suspension of various amounts of salt, soot, dust, and humic acid. In another aspect, a method may include weathering a sample of material in a first exposure of the sample to ultraviolet light, water vapor, and elevated temperatures, depositing a soiling mixture on the sample, and weathering the sample in a second exposure of the sample to ultraviolet light, water vapor, and elevated temperatures.

  10. Pulsed electron beam propagation in argon and nitrogen gas mixture

    Science.gov (United States)

    Kholodnaya, G. E.; Sazonov, R. V.; Ponomarev, D. V.; Remnev, G. E.; Zhirkov, I. S.

    2015-10-01

    The paper presents the results of current measurements for the electron beam, propagating inside a drift tube filled in with a gas mixture (Ar and N2). The experiments were performed using the TEA-500 pulsed electron accelerator. The main characteristics of electron beam were as follows: 60 ns pulse duration, up to 200 J energy, and 5 cm diameter. The electron beam propagated inside the drift tube assembled of three sections. Gas pressures inside the drift tube were 760 ± 3, 300 ± 3, and 50 ± 1 Torr. The studies were performed in argon, nitrogen, and their mixtures of 33%, 50%, and 66% volume concentrations, respectively.

  11. A new efficient mixture screening design for optimization of media.

    Science.gov (United States)

    Rispoli, Fred; Shah, Vishal

    2009-01-01

    Screening ingredients for the optimization of media is an important first step to reduce the many potential ingredients down to the vital few components. In this study, we propose a new method of screening for mixture experiments called the centroid screening design. Comparison of the proposed design with Plackett-Burman, fractional factorial, simplex lattice design, and modified mixture design shows that the centroid screening design is the most efficient of all the designs in terms of the small number of experimental runs needed and for detecting high-order interaction among ingredients. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

  12. Structure Property Relationships in Imidazole-based Deep Eutectic Mixtures

    Science.gov (United States)

    Terheggen, Logan; Cosby, Tyler; Sangoro, Joshua

    2015-03-01

    Deep eutectic mixtures of levulinic acid with a systematic series of imidazoles are measured by broadband dielectric spectroscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy to investigate the impact of steric interactions on charge transport and structural dynamics. An enhancement of dc conductivity is found in each of the imidazoles upon the addition of levulinic acid. However, the extent of increase is dependent upon the alkyl substitution on the imidazole ring. These results highlight the importance of molecular structure on hydrogen bonding and charge transport in deep eutectic mixtures.

  13. Catalytic Gasification of Coal using Eutectic Salt Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Atul Sheth; Pradeep Agrawal; Yaw D. Yeboah

    1998-12-04

    The objectives of this study are to: identify appropriate eutectic salt mixture catalysts for coal gasification; assess agglomeration tendency of catalyzed coal; evaluate various catalyst impregnation techniques to improve initial catalyst dispersion; evaluate effects of major process variables (such as temperature, system pressure, etc.) on coal gasification; evaluate the recovery, regeneration and recycle of the spent catalysts; and conduct an analysis and modeling of the gasification process to provide better understanding of the fundamental mechanisms and kinetics of the process. A review of the collected literature was carried out. The catalysts which have been used for gasification can be roughly classified under the following five groups: alkali metal salts; alkaline earth metal oxides and salts; mineral substances or ash in coal; transition metals and their oxides and salts; and eutectic salt mixtures. Studies involving the use of gasification catalysts have been conducted. However, most of the studies focused on the application of individual catalysts. Only two publications have reported the study of gasification of coal char in CO2 and steam catalyzed by eutectic salt mixture catalysts. By using the eutectic mixtures of salts that show good activity as individual compounds, the gasification temperature can be reduced possibly with still better activity and gasification rates due to improved dispersion of the molten catalyst on the coal particles. For similar metal/carbon atomic ratios, eutectic catalysts were found to be consistently more active than their respective single salts. But the exact roles that the eutectic salt mixtures play in these are not well understood and details of the mechanisms remain unclear. The effects of the surface property of coals and the application methods of eutectic salt mixture catalysts with coal chars on the reactivity of gasification will be studied. Based on our preliminary evaluation of the literature, a ternary

  14. Improving Students' Understanding of the Connections between the Concepts of Real-Gas Mixtures, Gas Ideal-Solutions, and Perfect-Gas Mixtures

    Science.gov (United States)

    Privat, Romain; Jaubert, Jean-Noël; Moine, Edouard

    2016-01-01

    In many textbooks of chemical-engineering thermodynamics, a gas mixture obeying the fundamental law pV[subscript m] = RT is most often called ideal-gas mixture (in some rare cases, the term perfect-gas mixture can be found). These textbooks also define the fundamental concept of ideal solution which in theory, can be applied indifferently to…

  15. New Flexible Models and Design Construction Algorithms for Mixtures and Binary Dependent Variables

    OpenAIRE

    Ruseckaite, Aiste

    2017-01-01

    markdownabstractThis thesis discusses new mixture(-amount) models, choice models and the optimal design of experiments. Two chapters of the thesis relate to the so-called mixture, which is a product or service whose ingredients’ proportions sum to one. The thesis begins by introducing mixture models in the choice context and develops new optimal design construction algorithms for choice experiments involving mixtures. Building further, varying the total amount of a mixture, and not only its i...

  16. Quantum statistics and liquid helium 3 - helum 4 mixtures

    International Nuclear Information System (INIS)

    Cohen, E.G.D.

    1979-01-01

    The behaviour of liquid helium 3-helium 4 mixtures is considered from the point of view of manifestation of quantum statistics effects in macrophysics. The Boze=Einstein statistics is shown to be of great importance for understanding superfluid helium-4 properties whereas the Fermi-Dirac statistics is of importance for understanding helium-3 properties. Without taking into consideration the interaction between the helium atoms it is impossible to understand the basic properties of liquid helium 33 - helium 4 mixtures at constant pressure. Proposed is a simple model of the liquid helium 3-helium 4 mixture, namely the binary mixture consisting of solid spheres of two types subjecting to the Fermi-Dirac and Bose-Einstein statistics relatively. This model predicts correctly the most surprising peculiarities of phase diagrams of concentration dependence on temperature for helium solutions. In particular, the helium 4 Bose-Einstein statistics is responsible for the phase lamination of helium solutions at low temperatures. It starts in the peculiar critical point. The helium 4 Fermi-Dirac statistics results in incomplete phase lamination close to the absolute zero temperatures, that permits operation of a powerful cooling facility, namely refrigerating machine on helium solution

  17. Comparison of different protein sources in enriched grain mixture for ...

    African Journals Online (AJOL)

    mixture by molasses powder. The protein sources, where applicable, were added subsequently and thoroughly mixed with the grain. The volume of water added amounted to about. 3 l/ 100kg. No storage problems occurred. The growth trial was carried out with 48 South African. Mutton Merino (SAMM) lambs, approximately ...

  18. Dielectric Relaxation Studies of Alkyl Methacrylate–Phenol Mixtures ...

    African Journals Online (AJOL)

    NJD

    mixtures with structure-breaking and structure-making proper- ties.8 Studies of the Kirkwood correlation factor ... cable. The sample was placed at the end of the coaxial line in a standard military application (SMA) coaxial cell. The physical dimensions of the cell are very important. The impedance of the cell should be ...

  19. Pharmacokinetics of a pyrethroid insecticide mixture in the rat

    Science.gov (United States)

    Pyrethroid insecticides are used and co-occur in the environment, in residences and day care facilities. Pharmacokinetic models of pyrethroids and assessment of risk from their exposure would be better informed if data are derived from studies using chemical mixtures. The objecti...

  20. Parameter Estimation and Model Selection for Mixtures of Truncated Exponentials

    DEFF Research Database (Denmark)

    Langseth, Helge; Nielsen, Thomas Dyhre; Rumí, Rafael

    2010-01-01

    Bayesian networks with mixtures of truncated exponentials (MTEs) support efficient inference algorithms and provide a flexible way of modeling hybrid domains (domains containing both discrete and continuous variables). On the other hand, estimating an MTE from data has turned out to be a difficult...

  1. Anti-platelet aggregation of mixtures of betulinic oleanolic and ...

    African Journals Online (AJOL)

    Original Research Article. Anti-platelet aggregation of mixtures of betulinic oleanolic ... Index Medicus, JournalSeek, Journal Citation Reports/Science Edition, Directory of Open Access Journals. (DOAJ), African Journal Online, Bioline ... antiseptic, aphrodisiac, anti-emetic, anti- inflammatory and carminative properties [5,6].

  2. Contributions to the analytical control of polyphenylic mixture

    International Nuclear Information System (INIS)

    Barrera Pinero, R.

    1961-01-01

    Separation and identification experiences of polyphenylic mixtures are described. the following technique are used: vacuum fractional distillation, vacuum sublimation and chromatography on acetylated paper. Also new coloured reactions of polyphenyls with aldehyde chlorides and their spectrophotometric application are studied. (Author) 17 refs

  3. Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Abdullah Mohd Ezree

    2017-01-01

    Full Text Available The objectives of this study are to investigate the engineering properties of the asphalt mixtures containing waste plastic at different percentages i.e. 4%, 6%, 8%, and 10% by weight of bitumen. The experimental tests performed in the study were stability, tensile strength, resilient modulus and dynamic creep test. Results showed that the mixture with 4% plastic has the highest stability (184kN. However, the stability slightly decreases with the increase of plastic additive. On the other hand, the highest tensile strength among the modified asphaltic concrete is 1049kPa (8% plastic added. The modified asphalt mixture with 8% plastic has the highest resilient modulus, which is 3422 MPa (25°C and 494Mpa (40°C. Where the highest creep modulus recorded is 73.30Mpa at 8% plastic added. It can be concluded that the addition of 8% plastic gave the highest value properties of asphalt mixture. Finally, it can be said that 8% plastic is the optimum value adding.

  4. Using particle packing technology for sustainable concrete mixture design

    NARCIS (Netherlands)

    Fennis, S.A.A.M.; Walraven, J.C.

    2012-01-01

    The annual production of Portland cement, estimated at 3.4 billion tons in 2011, is responsible for about 7% of the total worldwide CO2-emission. To reduce this environmental impact it is important to use innovative technologies for the design of concrete structures and mixtures. In this paper, it

  5. Posterior convergence rates of Dirichlet mixtures at smooth densities

    NARCIS (Netherlands)

    Ghosal, S.; van der Vaart, A.W.

    2007-01-01

    We study the rates of convergence of the posterior distribution for Bayesian density estimation with Dirichlet mixtures of normal distributions as the prior. The true density is assumed to be twice continuously differentiable. The bandwidth is given a sequence of priors which is obtained by scaling

  6. Extra-terrestrial sprites: laboratory investigations in planetary gas mixtures

    NARCIS (Netherlands)

    D. Dubrovin; Y. Yair; C. Price; S. Nijdam (Sander); T.T.J. Clevis; E.M. van Veldhuizen; U. M. Ebert (Ute)

    2012-01-01

    textabstractWe investigate streamers in gas mixtures representing the atmospheres of Jupiter, Saturn (H2-He) and Venus (CO2-N2). Streamer diameters, velocities, radiance and overall morphology are investigated with fast ICCD camera images. We confirm experimentally the scaling of streamer diameters

  7. Superlattice configurations in linear chain hydrocarbon binary mixtures

    Indian Academy of Sciences (India)

    Unknown

    of n-C28H58 hydrocarbon, through an angle mθ, where m = 1, 2, 3 … and angle θ has an average value of. 3.3°. Supporting literature ... Keywords. Long-chain alkanes; binary mixtures; superlattices; discrete orientational changes. 1. Introduction ... tem and a model of superlattice configuration was proposed4, in terms of ...

  8. Variation of ionic conductivity in a plastic-crystalline mixture

    Science.gov (United States)

    Reuter, D.; Geiß, C.; Lunkenheimer, P.; Loidl, A.

    2017-09-01

    Ionically conducting plastic crystals (PCs) are possible candidates for solid-state electrolytes in energy-storage devices. Interestingly, the admixture of larger molecules to the most prominent molecular PC electrolyte, succinonitrile, was shown to drastically enhance its ionic conductivity. Therefore, binary mixtures seem to be a promising way to tune the conductivity of such solid-state electrolytes. However, to elucidate the general mechanisms of ionic charge transport in plastic crystals and the influence of mixing, a much broader database is needed. In the present work, we investigate mixtures of two well-known plastic-crystalline systems, cyclohexanol and cyclooctanol, to which 1 mol. % of Li ions were added. Applying differential scanning calorimetry and dielectric spectroscopy, we present a thorough investigation of the phase behavior and the ionic and dipolar dynamics of this system. All mixtures reveal plastic-crystalline phases with corresponding orientational glass-transitions. Moreover, their conductivity seems to be dominated by the "revolving-door" mechanism, implying a close coupling between the ionic translational and the molecular reorientational dynamics of the surrounding plastic-crystalline matrix. In contrast to succinonitrile-based mixtures, there is no strong variation of this coupling with the mixing ratio.

  9. Phase diagrams and lipid domains in multicomponent lipid bilayer mixtures.

    Science.gov (United States)

    Feigenson, Gerald W

    2009-01-01

    Understanding the phase behavior of biological membranes is helped by the study of more simple systems. Model membranes that have as few as 3 components exhibit complex phase behavior that can be well described, providing insight for biological membranes. A number of different studies are in agreement on general findings for some compositional phase diagrams, in particular, those that model the outer leaflet of animal cell plasma membranes. These model mixtures include cholesterol, together with one high-melting lipid and one low-melting lipid. An interesting finding is of two categories of such 3-component mixtures, leading to what we term Type I and Type II compositional phase diagrams. The latter have phase regions of macroscopic coexisting domains of [Lalpha+Lbeta+Lo] and of [Lalpha+Lo], with domains resolved under the light microscope. Type I mixtures have the same phase coexistence regions, but the domains seem to be nanoscopic. Type I mixtures are likely to be better models for biological membranes.

  10. Crystallisation of mixtures of ammonium nitrate, ammonium sulphate and soot

    NARCIS (Netherlands)

    Dougle, P.G.; Veefkind, J.P.; Brink, H.M. ten

    1998-01-01

    Crystallisation of laboratory aerosols of ammonium nitrate and of internal mixtures of this salt with ammonium sulphate were investigated using humidity controlled nephelometry. The aerosol was produced via nebulizing of solutions and then dried to 25% RH, which is a realistic minimum value for

  11. Use of waste plastic in concrete mixture as aggregate replacement.

    Science.gov (United States)

    Ismail, Zainab Z; Al-Hashmi, Enas A

    2008-11-01

    Industrial activities in Iraq are associated with significant amounts of non-biodegradable solid waste, waste plastic being among the most prominent. This study involved 86 experiments and 254 tests to determine the efficiency of reusing waste plastic in the production of concrete. Thirty kilograms of waste plastic of fabriform shapes was used as a partial replacement for sand by 0%, 10%, 15%, and 20% with 800 kg of concrete mixtures. All of the concrete mixtures were tested at room temperature. These tests include performing slump, fresh density, dry density, compressive strength, flexural strength, and toughness indices. Seventy cubes were molded for compressive strength and dry density tests, and 54 prisms were cast for flexural strength and toughness indices tests. Curing ages of 3, 7, 14, and 28 days for the concrete mixtures were applied in this work. The results proved the arrest of the propagation of micro cracks by introducing waste plastic of fabriform shapes to concrete mixtures. This study insures that reusing waste plastic as a sand-substitution aggregate in concrete gives a good approach to reduce the cost of materials and solve some of the solid waste problems posed by plastics.

  12. Sparse Gaussian graphical mixture model | Lotsi | Afrika Statistika

    African Journals Online (AJOL)

    Abstract. This paper considers the problem of networks reconstruction from heterogeneous data using a Gaussian Graphical Mixture Model (GGMM). It is well known that parameter estimation in this context is challenging due to large numbers of variables coupled with the degenerate nature of the likelihood. We propose as ...

  13. Effects of nitrogen and phosphine mixtures on storedproduct insects ...

    African Journals Online (AJOL)

    Adults of Sitophilus oryzae (L.), Tribolium castaneum (Herbst), Rhizopertha dominica (F.), Callosobrochus maculatus (F.) and 3th larvae of Plodia interpunctella (Hubner) were exposed the mixture of nitrogen and phosphine. After exposure periods of 24 h, the insects were transferred to clean jars containing food and held at ...

  14. Powder XRD investigations on dotriacontane in mixtures: Phase ...

    Indian Academy of Sciences (India)

    Unknown

    Powder XRD investigations on dotriacontane in mixtures: Phase strength and super lattices. P B SHASHIKANTH and P B V PRASAD*. SR Research Laboratory for Studies in Crystallization Phenomena, 10-1-96,. Mamillaguda, Khammam 507 001, India e-mail: prasadpbv_kmm@sol.net.in. MS received 29 January 2000; ...

  15. Afrikaner spirituality: A complex mixture | Oliver | HTS Teologiese ...

    African Journals Online (AJOL)

    The article argues that the perception that Afrikaner spirituality is and has always been founded mainly or only upon the Calvinistic tradition is a misconception. Nineteenth century Afrikaner spiritualism consisted of a mixture of theology, philosophy and a way of adapting to extreme living conditions. These factors, although ...

  16. Improved Gaussian Mixture Models for Adaptive Foreground Segmentation

    DEFF Research Database (Denmark)

    Katsarakis, Nikolaos; Pnevmatikakis, Aristodemos; Tan, Zheng-Hua

    2016-01-01

    Adaptive foreground segmentation is traditionally performed using Stauffer & Grimson’s algorithm that models every pixel of the frame by a mixture of Gaussian distributions with continuously adapted parameters. In this paper we provide an enhancement of the algorithm by adding two important dynamic...

  17. Bayesian Hierarchical Grouping: perceptual grouping as mixture estimation

    Science.gov (United States)

    Froyen, Vicky; Feldman, Jacob; Singh, Manish

    2015-01-01

    We propose a novel framework for perceptual grouping based on the idea of mixture models, called Bayesian Hierarchical Grouping (BHG). In BHG we assume that the configuration of image elements is generated by a mixture of distinct objects, each of which generates image elements according to some generative assumptions. Grouping, in this framework, means estimating the number and the parameters of the mixture components that generated the image, including estimating which image elements are “owned” by which objects. We present a tractable implementation of the framework, based on the hierarchical clustering approach of Heller and Ghahramani (2005). We illustrate it with examples drawn from a number of classical perceptual grouping problems, including dot clustering, contour integration, and part decomposition. Our approach yields an intuitive hierarchical representation of image elements, giving an explicit decomposition of the image into mixture components, along with estimates of the probability of various candidate decompositions. We show that BHG accounts well for a diverse range of empirical data drawn from the literature. Because BHG provides a principled quantification of the plausibility of grouping interpretations over a wide range of grouping problems, we argue that it provides an appealing unifying account of the elusive Gestalt notion of Prägnanz. PMID:26322548

  18. Turbidimetric Estimation of Alcohol Concentration in Aqueous-Alcohol Mixtures

    Science.gov (United States)

    Swinehart, William E.; Zimmerman, Bonnie L.; Powell, Kinsey; Moore, Stephen D.; Iordanov, Tzvetelin D.

    2014-01-01

    A concept of the turbidimetric method for determining the concentration of ethanol in water-ethanol mixtures is described. A closed sample cell containing the analyte was heated to achieve vapor saturation and subsequent condensation. As the condensation occurred, the decrease in percentage transmittance with time due to light scattering was…

  19. Quantification of food polysaccharide mixtures by ¹H NMR

    NARCIS (Netherlands)

    Merkx, Donny W.H.; Westphal, Yvonne; Velzen, van Ewoud J.J.; Thakoer, Kavish V.; Roo, de Niels; Duynhoven, van John P.M.

    2018-01-01

    Polysaccharides are food ingredients that critically determine rheological properties and shelf life. A qualitative and quantitative assessment on food-specific polysaccharide mixtures by 1H NMR is presented. The method is based on the identification of intact polysaccharides, combined

  20. Relaxation in binary mixtures: Non-ideality, heterogeneity and re ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 113; Issue 5-6. Relaxation in ... Binary mixtures show many kinds of fascinating dynamical behaviour which has eluded microscopic description till very recently. In this work we show ... Specifically, three well-known problems have been addressed here. Non-ideality in ...

  1. Optimization and characterization of liposome formulation by mixture design.

    Science.gov (United States)

    Maherani, Behnoush; Arab-tehrany, Elmira; Kheirolomoom, Azadeh; Reshetov, Vadzim; Stebe, Marie José; Linder, Michel

    2012-02-07

    This study presents the application of the mixture design technique to develop an optimal liposome formulation by using the different lipids in type and percentage (DOPC, POPC and DPPC) in liposome composition. Ten lipid mixtures were generated by the simplex-centroid design technique and liposomes were prepared by the extrusion method. Liposomes were characterized with respect to size, phase transition temperature, ζ-potential, lamellarity, fluidity and efficiency in loading calcein. The results were then applied to estimate the coefficients of mixture design model and to find the optimal lipid composition with improved entrapment efficiency, size, transition temperature, fluidity and ζ-potential of liposomes. The response optimization of experiments was the liposome formulation with DOPC: 46%, POPC: 12% and DPPC: 42%. The optimal liposome formulation had an average diameter of 127.5 nm, a phase-transition temperature of 11.43 °C, a ζ-potential of -7.24 mV, fluidity (1/P)(TMA-DPH)((¬)) value of 2.87 and an encapsulation efficiency of 20.24%. The experimental results of characterization of optimal liposome formulation were in good agreement with those predicted by the mixture design technique.

  2. Learning Mixtures of Truncated Basis Functions from Data

    DEFF Research Database (Denmark)

    Langseth, Helge; Nielsen, Thomas Dyhre; Pérez-Bernabé, Inmaculada

    2014-01-01

    In this paper we investigate methods for learning hybrid Bayesian networks from data. First we utilize a kernel density estimate of the data in order to translate the data into a mixture of truncated basis functions (MoTBF) representation using a convex optimization technique. When utilizing...

  3. Slow rheological mode in glycerol and glycerol–water mixtures

    DEFF Research Database (Denmark)

    Jensen, Mikkel Hartmann; Gainaru, Catalin; Alba-Simionesco, Christiane

    2018-01-01

    Glycerol–water mixtures were studied at molar concentrations ranging from xgly = 1 (neat glycerol) to xgly = 0.3 using shear mechanical spectroscopy. We observed a low frequency mode in neat glycerol, similar to what has been reported for monohydroxy alcohols. This mode has no dielectric...

  4. Gibbs ensemble Monte Carlo simulations of multicomponent natural gas mixtures

    NARCIS (Netherlands)

    Ramdin, M.; Jamali, S.H.; Becker, T.M.; Vlugt, T.J.H.

    2018-01-01

    Vapour–liquid equilibrium (VLE) and volumetric data of multicomponent mixtures are extremely important for natural gas production and processing, but it is time consuming and challenging to experimentally obtain these properties. An alternative tool is provided by means of molecular simulation.

  5. Comparing State SAT Scores Using a Mixture Modeling Approach

    Science.gov (United States)

    Kim, YoungKoung Rachel

    2009-01-01

    Presented at the national conference for AERA (American Educational Research Association) in April 2009. The large variability of SAT taker population across states makes state-by-state comparisons of the SAT scores challenging. Using a mixture modeling approach, therefore, the current study presents a method of identifying subpopulations in terms…

  6. Effects of mixtures of dicamba and glyphosate on nontarget plants

    Science.gov (United States)

    New technologies are being developed using mixtures of herbicides to manage a broader variety of weeds in multiple herbicide resistant crops such as soybean and cotton. As part of its regulation of pesticides, the US Environmental Protection Agency considers environmental risks,...

  7. Olfactory attractiveness of mixtures of some host plant and ...

    African Journals Online (AJOL)

    A simple "Y" shaped olfactometer was used in laboratory studies on the olfactory attractiveness of mixtures in various proportions of industrial analogues of some host plant and conspecific-based semiochemicals, or their combinations with banana rhizome, to the banana weevil. The aim was to identify factors that influence ...

  8. Characterisation of Oil-Gas Mixtures by Raman Spectroscopy

    DEFF Research Database (Denmark)

    Hansen, Susanne Brunsgaard; Berg, Rolf W.; Stenby, Erling Halfdan

    2004-01-01

    . The present project deals with development of a technique for quick analysis of oil-gas mixtures. The main emphasis is laid on characterisation of gas phases in equilibrium with oil at high pressures and high temperatures by Raman spectroscopy. The Raman technique has a great potential of being useful, due...

  9. Anti-platelet aggregation of mixtures of betulinic oleanolic and ...

    African Journals Online (AJOL)

    Anti-platelet aggregation of mixtures of betulinic oleanolic and maslinic acids and derivatives from medicinal plants. Foluso O. Osunsanmi, Babatunji E. Oyinloye, Rebamang A. Mosa, Monisola I. Ikhile, J Catherine Ngila, Francis O. Shode, M Singh, Andy R. Opoku ...

  10. Effectiveness of anti-strip agents in asphalt mixtures.

    Science.gov (United States)

    2012-07-01

    Since the late 1970s there has been much research performed to better understand the stripping phenomenon in asphalt mixtures. : As a result, there have been changes in both materials and technology over the past 30 years to improve the resistance to...

  11. Sand-Laterite Mixtures for Road Construction (A Laboratory ...

    African Journals Online (AJOL)

    Soil mixtures have been used extensively in developed countries to construct great lengths of road when other materials like cement and lime were not either available, developed or widely used. Developing countries with low per capita income, low cement and lime production, can use the same technique today. Laterite ...

  12. Polymer mixtures in confined geometries: Model systems to explore ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 64; Issue 6. Polymer mixtures in confined geometries: Model systems to explore phase transitions. K Binder M Müller A Cavallo E V Albano. Invited Talks:- Topic 7. Soft condensed matter (colloids, polymers, liquid crystals, microemulsions, foams, membranes, etc.) ...

  13. Spasmolytic Effects of Aqueous Extract of Mixture from ...

    African Journals Online (AJOL)

    The spasmolytic properties of the aqueous extract of Aframomum melegueta (K Schum) and Citrus aurantifolia (Christm and Panzer) (AMCA) mixture were tested on isolated rat trachea. Inhibition of the contraction was observed the in presence of the AMCA (EC 50 = 1.80 ± 0.48 mg/mL) after a pre contraction of the trachea ...

  14. Mixture effects of endocrine disrupting compounds in vitro

    DEFF Research Database (Denmark)

    Kjærstad, Mia Birkhøj; Taxvig, Camilla; Andersen, H. R.

    2010-01-01

    assuming additivity. Overall these and other studies show that weak endocrine disrupting compounds, like parabens and azole fungicides, give rise to combination effects when they occur in mixtures. These combination effects should be taken into account in regulatory risk assessment not to under...

  15. Experimental studies on ion mobility in xenon-trimethylamine mixtures

    Science.gov (United States)

    Trindade, A. M. F.; Encarnação, P. M. C. C.; Escada, J.; Cortez, A. F. V.; Neves, P. N. B.; Conde, C. A. N.; Borges, F. I. G. M.; Santos, F. P.

    2017-07-01

    In this paper we present experimental results for ion reduced mobilities (K0) in gaseous trimethylamine, TMA—(CH3)3N, and xenon-TMA mixtures for reduced electric fields E/N between 7.5 and 60 Td and in the pressure range from 0.5 to 10 Torr, at room temperature. Both in the mixtures and in pure TMA only one peak was observed in the time of arrival spectra, which is believed to be due to two TMA ions with similar mass, (CH3)3N+ (59 u) and (CH3)2CH2N+ (58 u), whose mobility is indistinguishable in our experimental system. The possibility of ion cluster formation is also discussed. In pure TMA, for the E/N range investigated, an average value of 0.56 cm2V-1s-1 was obtained for the reduced mobility of TMA ions. For the studied mixtures, it was observed that even a very small amount of gaseous TMA (~0.2%) in xenon leads to the production of the above referred TMA ions or clusters. The reduced mobility value of this ion or ions in Xe-TMA mixtures is higher than the value in pure TMA: around 0.8 cm2V-1s-1 for TMA concentrations from 0.2% to about 10%, decreasing for higher TMA percentages, eventually converging to the reduced mobility value in pure TMA.

  16. Liquid crystalline behaviour of mixtures of structurally dissimilar ...

    Indian Academy of Sciences (India)

    Unknown

    Liquid crystalline behaviour of mixtures of structurally dissimilar mesogens in binary systems. JAYRANG S DAVE*, MEERA R MENON and PRATIK R PATEL. Department of Applied Chemistry, Faculty of Technology and Engineering,. M S University of Baroda, Baroda 390 001, India e-mail: jayrangdave@yahoo.com.

  17. Microwave dielectric characterization of binary mixture of formamide ...

    Indian Academy of Sciences (India)

    C in the frequency range of 10 MHz to 20 GHz. The mixtures exhibit a principle dispersion of the Davidson–Cole relaxation type at microwave frequencies. Bilinear calibration method is used to obtain complex permittivity ε*. (ω) from complex reflection coefficient ρ*. (ω) over the frequency range of 10 MHz to 10 GHz.

  18. utilization of ensiled metabolizable mixture of cassava peel and caged

    African Journals Online (AJOL)

    Toluwande

    2011-09-05

    Sep 5, 2011 ... component of farm animal feed has been documented [8, 9]. Therefore, this investigation was carried out to study the response of broiler chicken to fermented mixture of cassava peel and caged layers' manure (obtained as farm residue or waste) and fed as a component of energy source in the feed.

  19. Effect of probiotic mixture on some haematological parametres in ...

    African Journals Online (AJOL)

    ml in 1ml normal saline together with daily administration of a mixture of probiotics (Lactobacillus acidophilus, Bacillus pumilus, Bacillus subtilis and Bacillus licheniformis) at 4.5 x10 CFU/ml, Group C: lambs were administered only viable STEC ...

  20. Studies on Molecular Interaction in Ternary Liquid Mixtures

    Directory of Open Access Journals (Sweden)

    R. Uvarani

    2010-01-01

    Full Text Available Ultrasonic velocity, density and viscosity for the ternary liquid mixtures of cyclohexanone with 1-propanol and 1-butanol in carbon tetrachloride were measured at 303 K. The acoustical parameters and their excess values were calculated. The trends in the variation of these excess parameters were used to discuss the nature and strength of the interactions present between the component molecules.