WorldWideScience

Sample records for leasing program butte

  1. 7 CFR 772.7 - Leasing minor program loan security.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Leasing minor program loan security. 772.7 Section 772..., DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS SERVICING MINOR PROGRAM LOANS § 772.7 Leasing minor program loan security. (a) Eligibility. The Agency may consent to the borrower leasing all or a portion of security...

  2. Oil and gas leasing/production program

    International Nuclear Information System (INIS)

    Heimberger, M.L.

    1992-01-01

    As the Congress declared in the Outer Continental Shelf Lands Act the natural gas and oil production from the Outer Continental Shelf constitutes an important part of the Nation's domestic energy supply. Federal offshore minerals are administered within the Department of the Interior by the Minerals Management Service (MMS), which provides access to potential new sources of natural gas and oil offshore by conducting lease sales. Each year, on or before March 31, the MMS presents to Congress a fiscal year annual report on the Federal offshore natural gas and oil leasing and production program. In FY 1991, this program was the third largest producer of non-tax revenue for the US Treasury, contributing more than $3 billion. This report presents Federal offshore leasing, sales, production, and exploration activities, and environmental monitoring activities

  3. Solar lease grant program. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress on a lease program for the installation of a solar water heater with no installation charge is reported. Information on the announcement of the program, the selection of participants, the contractural agreement, progress on installation of equipment, monitoring, and evaluation is summarized. The status of the budget concerned with the program is announced. Forms used for applications for the program and an announcement from Resource Alternatives for Cilco customers are presented.

  4. California State Implementation Plan; Butte County Air Quality Management District; New Source Review (NSR) Permitting Program

    Science.gov (United States)

    EPA is proposing to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California SIP concerning the District's New Source Review (NSR) permitting program for new and modified sources of air pollution.

  5. Final environmental statement for the geothermal leasing program

    Energy Technology Data Exchange (ETDEWEB)

    1973-12-31

    This second of the four volumes of the Geothermal Leasing Program final impact statement contains the individual environmental statements for the leasing of federally owned geothermal resources for development in three specific areas: Clear Lake-Geysers; Mono Lake-Long Valley; and Imperial Valley, all in California. It also includes a summary of the written comments received and departmental responses relative to the Draft Environmental Impact Statement issued in 1971; comments and responses on the Draft Environmental Impact Statement; consultation and coordination in the development of the proposal and in the preparation of the Draft Environmental Statement; and coordination in the review of the Draft Environmental Statement.

  6. Final Environmental assessment for the Uranium Lease Management Program

    International Nuclear Information System (INIS)

    1995-07-01

    The US Department of Energy (DOE) has prepared a programmatic environmental assessment (EA) of the proposed action to continue leasing withdrawn lands and DOE-owned patented claims for the exploration and production of uranium and vanadium ores. The Domestic Uranium Program regulation, codified at Title 10, Part 760.1, of the US Code of Federal Regulations (CFR), gives DOE the flexibility to continue leasing these lands under the Uranium Lease Management Program (ULMP) if the agency determines that it is in its best interest to do so. A key element in determining what is in DOE's ''best interest'' is the assessment of the environmental impacts that may be attributable to lease tract operations and associated activities. On the basis of the information and analyses presented in the EA for the ULMP, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment, as defined in the National Environmental Policy Act (NEPA) of 1969 (42 United States Code 4321 et seq.), as amended.Therefore, preparation of an environmental impact statement is not required for the ULMP,and DOE is issuing this Finding, of No Significant Impact (FONSI)

  7. Final Environmental assessment for the Uranium Lease Management Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The US Department of Energy (DOE) has prepared a programmatic environmental assessment (EA) of the proposed action to continue leasing withdrawn lands and DOE-owned patented claims for the exploration and production of uranium and vanadium ores. The Domestic Uranium Program regulation, codified at Title 10, Part 760.1, of the US Code of Federal Regulations (CFR), gives DOE the flexibility to continue leasing these lands under the Uranium Lease Management Program (ULMP) if the agency determines that it is in its best interest to do so. A key element in determining what is in DOE`s ``best interest`` is the assessment of the environmental impacts that may be attributable to lease tract operations and associated activities. On the basis of the information and analyses presented in the EA for the ULMP, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment, as defined in the National Environmental Policy Act (NEPA) of 1969 (42 United States Code 4321 et seq.), as amended.Therefore, preparation of an environmental impact statement is not required for the ULMP,and DOE is issuing this Finding, of No Significant Impact (FONSI).

  8. Utilizing the geochemical data from the National Uranium Resource Evaluation (NURE) program: an evaluation of the Butte quadrangle, Montana

    International Nuclear Information System (INIS)

    Van Eeckhout, E.M.

    1980-12-01

    Some 1370 water and 1951 sediment samples were collected from 1994 locations in the Butte quadrangle, Montana, in 1976 and 1977 by the University of Montana for the Los Alamos Scientific Laboratory (LASL). The LASL analyzed the water samples for uranium and the sediment samples for uranium plus 42 additional elements. The data were then released to the Montana College of Mineral Science and Technology (MCMS and T), which was responsible for the evaluation of the uranium data. The data have subsequently been released by the LASL in an open-file report (Broxton, 1980). Statistical evaluations of the data were undertaken for uranium, copper, lead, zinc, manganese, gold, and silver. The uranium evaluations indicated certain areas in the western part of the quadrangle to be favorable for further investigation (particularly along the Rock Creek), as well as anomalous areas just north of Anaconda. The entire Boulder Batholith area had a high uranium background, but there didn't appear to be any particular site in this area that might be worth pursuing. The multielement evaluations confirmed the known base and precious metal provinces within the quadrangle. A methodology for evaluating data tapes from the National Uranium Resource Evaluation (NURE) program was developed and presented throughout this report. This methodology could be developed further to define areas worth exploring for commodities other than uranium

  9. 77 FR 24734 - Outer Continental Shelf (OCS) Renewable Energy Program Leasing for Marine Hydrokinetic Technology...

    Science.gov (United States)

    2012-04-25

    ... DEPARTMENT OF THE INTERIOR Bureau of Ocean Energy Management [Docket No. BOEM-2012-0011] Outer Continental Shelf (OCS) Renewable Energy Program Leasing for Marine Hydrokinetic Technology Testing Offshore Florida AGENCY: Bureau of Ocean Energy Management, Interior. ACTION: Notice of the Availability of an...

  10. 41 CFR 101-26.501-9 - Centralized motor vehicle leasing program.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Centralized motor vehicle leasing program. 101-26.501-9 Section 101-26.501-9 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26...

  11. 10 CFR 760.1 - Uranium leases on lands controlled by DOE. (Domestic Uranium Program Circular No. 760.1, formerly...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Uranium leases on lands controlled by DOE. (Domestic Uranium Program Circular No. 760.1, formerly (AEC) Domestic Uranium Program Circular 8, 10 CFR 60.8). 760.1 Section 760.1 Energy DEPARTMENT OF ENERGY DOMESTIC URANIUM PROGRAM § 760.1 Uranium leases on lands...

  12. 76 FR 70156 - Proposed 5-Year Outer Continental Shelf (OCS) Oil and Gas Leasing Program for 2012-2017

    Science.gov (United States)

    2011-11-10

    ... Analysis for the OCS 5-Year Program 2012-2017: Theory and Methodology (BOEM 050-2011), a paper containing a..., which remain the two areas of highest resource potential and interest, the Proposed Program schedules..., and setting the fiscal terms and conditions by individual lease sale, based on a current assessment of...

  13. Interview with Gavin Butt

    DEFF Research Database (Denmark)

    Hasse Jørgensen, Stina; Alexandra Sofie, Jönsson

    2008-01-01

    We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory.......We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory....

  14. FIRE HAZARDS ANALYSIS - BUSTED BUTTE

    International Nuclear Information System (INIS)

    Longwell, R.; Keifer, J.; Goodin, S.

    2001-01-01

    The purpose of this fire hazards analysis (FHA) is to assess the risk from fire within individual fire areas at the Busted Butte Test Facility and to ascertain whether the DOE fire safety objectives are met. The objective, identified in DOE Order 420.1, Section 4.2, is to establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: (1) The occurrence of a fire related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees. (3) Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. Critical process controls and safety class systems being damaged as a result of a fire and related events

  15. 78 FR 16483 - Notice of Availability of the Draft Uranium Leasing Program Programmatic Environmental Impact...

    Science.gov (United States)

    2013-03-15

    ... Protection Agency (EPA); Colorado Department of Transportation; Colorado Division of Reclamation, Mining, and... via the internet at http://ulpeis.anl.gov/ gov/. DOE will give equal weight to written, email, and... Court, among other things, invalidated the July 2007 PEA and FONSI; stayed the ULP leases; and ordered...

  16. Radio and television use in Butte County, California: application to fire prevention

    Science.gov (United States)

    William S. Folkman

    1975-01-01

    A sample of Butte County residents were interviewed about their radio and television use habits. Their responses were analyzed in terms of demographic, social, and economic characteristics. The findings can be used in developing more effective fire prevention programs. Most people in Butte County listen to the radio or watch television but they differ widely in the way...

  17. Conventional Leasing vs Islamic Leasing

    Directory of Open Access Journals (Sweden)

    Violeta ISAI

    2014-12-01

    Full Text Available Leasing developed in time, from the simple form of renting to the modern modality of financial from nowadays, as an alternative for loan. It is present in the entire world, being used both by the financial specialized companies and banks, and the clients are companies and population. The object of leasing contract can be assets and also services, which are rented by the financier (lessor, on definite period, to the client (lessee, in exchange for a leasing rate (rent. The registering in accounting and the fiscal implications in the companies financial administration are different, according to the leasing form which they are using. The capitalist system has in view to obtain profit from renting, but the Islamic System, based on Șaria, forbids renting “haram” assets and services, obtaining interest from renting and using the leasing contract for the transfer of the property.

  18. Solar Leasing Summary, Houston Texas

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, Mary [City of San Antonio, TX (United States)

    2013-02-14

    A relatively new option for homeowners looking to add solar to their home is the solar lease. At present, the solar lease option can be found in California, Arizona, Texas, Colorado, Hawaii, New York and Oregon. The most active companies currently offering solar leases are NRG Energy, Sungevity, Solar City and Sun Run. With the uncertainty and/or lack of subsidies the states participating in these programs have ebbed and flowed over the last few years. However, there is an expectation that in the current market solar leasing will make solar viable without the utility and federal subsidies. NRG Energy is currently testing this expectation in Houston, TX where currently no subsidies or incentives beyond the federal tax incentives, exist. Following is an explanation on the state of solar leasing in Houston, TX and explanation of the current financing options.

  19. Busted Butte Unsaturated Zone Transport Test: Fiscal Year 1998 Status Report Yucca Mountain Site Characterization Program Deliverable SPU85M4

    International Nuclear Information System (INIS)

    Bussod, G.Y.; Turin, H.J.; Lowry, W.E.

    1999-01-01

    This report describes the status of the Busted Butte Unsaturated Zone Transport Test (UZTT) and documents the progress of construction activities and site and laboratory characterization activities undertaken in fiscal year 1998. Also presented are predictive flow-and-transport simulations for Test Phases 1 and 2 of testing and the preliminary results and status of these test phases. Future anticipated results obtained from unsaturated-zone (UZ) transport testing in the Calico Hills Formation at Busted Butte are also discussed in view of their importance to performance assessment (PA) needs to build confidence in and reduce the uncertainty of site-scale flow-and-transport models and their abstractions for performance for license application. The principal objectives of the test are to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain, as identified by the PA working group in February 1997. These include but are not restricted to: (1) The effect of heterogeneities on flow and transport in unsaturated and partially saturated conditions in the Calico Hills Formation. In particular, the test aims to address issues relevant to fracture-matrix interactions and permeability contrast boundaries; (2) The migration behavior of colloids in fractured and unfractured Calico Hills rocks; (3) The validation through field testing of laboratory sorption experiments in unsaturated Calico Hills rocks; (4) The evaluation of the 3-D site-scale flow-and-transport process model (i.e., equivalent-continuum/dual-permeability/discrete-fracture-fault representations of flow and transport) used in the PA abstractions for license application; and (5) The effect of scaling from lab scale to field scale and site scale

  20. Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials

    Directory of Open Access Journals (Sweden)

    Saternus Zbigniew

    2018-01-01

    Full Text Available The paper concerns numerical analysis of thermal phenomena occurring in the butt welding of two different materials by a laser beam welding. The temperature distribution for the welded butt-joint is obtained on the basis of numerical simulations performed in the ABAQUS program. Numerical analysis takes into account the thermophysical properties of welded plate made of two different materials. Temperature distribution in analysed joints is obtained on the basis of numerical simulation in Abaqus/Standard solver, which allowed the determination of the geometry of laser welded butt-joint.

  1. 77 FR 6479 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

    Science.gov (United States)

    2012-02-08

    ... Commercial Access; Development of Competition and Diversity in Video Programming Distribution and Carriage... contained in the Second Report and Order, FCC 11-119, pertaining to carriage of video programming vendors by multichannel video programming distributors (program carriage rules). This notice is consistent with the Secord...

  2. 76 FR 60651 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

    Science.gov (United States)

    2011-09-29

    ... programming services seeking access through their conduit.''); H.R. Rep. No. 102-628 (1992), at 41 (``[T]he... Programming Distribution and Carriage; Revision of the Commission's Program Carriage Rules; Final Rule and... Programming Distribution and Carriage AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY...

  3. Impact of end of lease contracts’ option on joint pricing and inventory decisions of remanufacturable leased products

    Directory of Open Access Journals (Sweden)

    M. Rabbani

    2016-04-01

    Full Text Available Leasing currently plays an important role for the global economy. The equipment leasing earning acquired through leasing rather than cash or credit, has reached a dominant level. With this regards, this paper represents a basic mixed-integer non-linear programming model. The study deliberates a firm that leases new products and remanufactured leased merchandises. The proposed study considers the end of lease contract, which contains several options: Return the leased product, return the used product and purchase other remanufactured product and buying the leased product. The primary objective is to maximize the discrepancy between the revenue and the costs of a firm, which leases new products as well as selling remanufactured ones. The product deteriorates with time and the difference between a new and used good is obvious. The product must undergo a remanufacturing procedure before being sold as a remanufactured product.

  4. 13 CFR 120.870 - Leasing Project Property.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Leasing Project Property. 120.870... Company Loan Program (504) Leasing Policies Specific to 504 Loans § 120.870 Leasing Project Property. (a... recorded lien against the leasehold estate and other collateral as necessary. (b) If the Project is for new...

  5. Rethinking the Buy vs. Lease Decision

    Science.gov (United States)

    2014-07-01

    Navy! Navy! SSN 721! 16! 44! 60! Navy! Navy! SSN 722! 23! 50! 73! Navy! Navy! CG 50! 18! 33! 51! Navy! Navy! CG 51! 27! 36! 63! Navy! Navy! FEG 57! 20...United States and Canada , FedEx operates FedEx Feeder on a damp lease program; the contractor leases the aircraft from FedEx fleet and provides a crew

  6. Truth in Leasing.

    Science.gov (United States)

    Board of Governors of the Federal Reserve System, Washington, DC.

    Designed for the general public and possibly suitable also for high school economics students, this pamphlet discusses the Consumer Leasing Act. The act requires leasing companies to inform consumers of the costs and terms of their contracts, limits any extra payments at the end of a lease, and regulates lease advertising. The pamphlet focuses on…

  7. 77 FR 32015 - Revision to the Section 8 Management Assessment Program Lease-Up Indicator

    Science.gov (United States)

    2012-05-31

    ... the HCV program and programmatic inefficiency. To eliminate such complexity, and reduce inefficiency... many HCVs, so the PHA may need to hold turnover HCVs so they will be available to assist new PBV... created after SEMAP began) have separate procedures or requirements that reduce the PHA's control over...

  8. 7 CFR 767.102 - Leasing non-real estate inventory property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Leasing non-real estate inventory property. 767.102..., DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INVENTORY PROPERTY MANAGEMENT Lease of Real Estate Inventory Property § 767.102 Leasing non-real estate inventory property. The Agency does not lease non-real estate...

  9. Leasing research

    Directory of Open Access Journals (Sweden)

    Pedro Franco

    2015-09-01

    Full Text Available En agosto de 2010, La International Accounting Standards Board (IASB y Financial AccountingStandards Board (FASB presentó un proyecto que propone un nuevo modelo de tratamientocontable para el arrendamiento. El propósito principal del Discussion Paper: Leases PreliminaryViews 2009 y el Exposure Draft: Leases 2010, emitidos conjuntamente por IASB y FASB, esla unificación en la presentación y tratamiento contable de la información financiera delarrendamiento a nivel internacional.Por un lado, la propuesta presentada en el Discussion Paper 2009 modificará los estándares delos arrendamientos e impactará aquellas empresas que utilicen contratos de arrendamientooperativo para sus activos fijos. Esto debido a que, bajo la actual NIC 17, el arrendatario noreconoce todas las obligaciones que genera el arrendamiento y por lo tanto, distorsiona losresultados afectando el proceso de toma de decisiones.Por otro lado, la propuesta del FASB plantea que, en el Estado de Situación Financiera,deben reconocerse los derechos y obligaciones del arrendatario bajo cualquier modelo dearrendamiento. Esto significará que se reconocerá un activo por el arrendamiento1 y un pasivopor los pagos futuros2. Asimismo la contabilidad del arrendador también se verá afectada, yaque la propuesta sugiere que el arrendador escoja entre dos modelos contables, los cualesdependen de la transferencia de riesgos y beneficios al momento de realizar el contrato dearrendamiento. Por lo tanto, la presente investigación tiene comoobjetivo analizar los impactos y dificultades de lanueva propuesta. Para esto se tendrán en cuentatanto la perspectiva de los arrendadores comode los arrendatarios.

  10. California Air Quality State Implementation Plans; Final Approval; Butte County Air Quality Management District; Stationary Source Permits

    Science.gov (United States)

    EPA is taking final action to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California State Implementation Plan (SIP). This revision concerns the District's New Source Review (NSR) permitting program.

  11. The Western Environmental Technology Office (WETO) Butte, Montana

    International Nuclear Information System (INIS)

    1994-10-01

    This document has been prepared to highlight the research, development, demonstration, testing and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. This information has been assembled from recently produced Office of Technology Development (OTD) documents which highlight technology development activities within each of the OTD program elements. Projects include: Heavy metals contaminated soil project; In Situ remediation integrated program; Minimum additive waste stabilization program; Resource recovery project; Buried waste integrated demonstration; Mixed waste integrated program; Pollution prevention program; and Mine waste technology program

  12. Leasing nemovitostí

    OpenAIRE

    BRONCOVÁ, Jana

    2010-01-01

    The main aim of this bachelor´s thesis is to offer closer look at not very well known form of property financing called property leasing. The thesis is divided into two main parts. The first part is focused on basic characteristics of leasing i.e. subject of leasing, forms of financing, advantages and disadvantages. The second part includes the definition of property leasing and subsequent terms. Property leasing development in the Czech Republic from 2000 to 2009 is also included. The thesis...

  13. Full Service Leasing

    OpenAIRE

    Richter, Ján

    2009-01-01

    Aim of this master thesis is to describe the service of Full Service Leasing, as a modern form of financing and management of assets, primarily automobile fleet. Description of full service leasing is designed as a comprehensive and complete guide to support reader's position when deciding to finance and manage a fleet by this service. Whether the reader is an entrepreneur, CFO, fleet manager, new employee of leasing company, or anyone who is interested in this service, this master thesis wil...

  14. Nuclear fuel lease accounting

    International Nuclear Information System (INIS)

    Danielson, A.H.

    1986-01-01

    The subject of nuclear fuel lease accounting is a controversial one that has received much attention over the years. This has occurred during a period when increasing numbers of utilities, seeking alternatives to traditional financing methods, have turned to leasing their nuclear fuel inventories. The purpose of this paper is to examine the current accounting treatment of nuclear fuel leases as prescribed by the Financial Accounting Standards Board (FASB) and the Federal Energy Regulatory Commission's (FERC's) Uniform System of Accounts. Cost accounting for leased nuclear fuel during the fuel cycle is also discussed

  15. Telecom infrastructure leasing

    International Nuclear Information System (INIS)

    Henley, R.

    1995-01-01

    Slides to accompany a discussion about leasing telecommunications infrastructure, including radio/microwave tower space, radio control buildings, paging systems and communications circuits, were presented. The structure of Alberta Power Limited was described within the ATCO group of companies. Corporate goals and management practices and priorities were summarized. Lessons and experiences in the infrastructure leasing business were reviewed

  16. 7 CFR 767.103 - Managing leased real estate inventory property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Managing leased real estate inventory property. 767... AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INVENTORY PROPERTY MANAGEMENT Lease of Real Estate Inventory Property § 767.103 Managing leased real estate inventory property. (a) The Agency will pay for...

  17. 47 CFR 76.971 - Commercial leased access terms and conditions.

    Science.gov (United States)

    2010-10-01

    ... operators that have not satisfied their statutory leased access requirements shall accommodate part-time..., educational and governmental access programming, provided that the operator's franchise agreement requires it... leased commercial channels. Cable operators may impose reasonable insurance requirements on leased access...

  18. 47 CFR 76.977 - Minority and educational programming used in lieu of designated commercial leased access capacity.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Minority and educational programming used in... Cable Rate Regulation § 76.977 Minority and educational programming used in lieu of designated... of programming from a qualified minority programming source or from any qualified educational...

  19. Innovations in Funding the Maritime Prepositioning Ships Program - A Case Analysis of the How and Why the Lease Option was Successful

    National Research Council Canada - National Science Library

    Bailey, John

    2004-01-01

    ... and equipment in strategic areas of the world. It will explain why the lease option was eventually approved when initially so many participants in the decision-making process objected to this type of financing for shipbuilding...

  20. 77 FR 12106 - Kapka Butte Sno-Park Construction

    Science.gov (United States)

    2012-02-28

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Kapka Butte Sno-Park Construction... Construction project. SUMMARY: The FHWA is issuing this notice to advise the public that the FHWA is officially designated as the Joint-Lead Agency pursuant to 23 U.S.C. 139(c)(1) for the Kapka Butte Sno-Park Construction...

  1. THE OBJECT OF LEASING OPERATIONS

    Directory of Open Access Journals (Sweden)

    Raluca Antoanetta TOMESCU

    2017-05-01

    Full Text Available The leasing operation according to article 1, paragraph (2 of Government Ordinance 51/1997 covers movable or immovable property by their nature or which become movable by destination and by the definition of the leasing operation that the legislator offers in the same law, the leasing operation appears to be reduced to signing a lease agreement. But as practice proves, and recognized by part of the legal doctrine, leasing operations cannot be reduced only to the conclusion of the lease agreement. If the lease agreement represents the materialization of the will of the parties (lender and user, it is fact only a stage (final stage of several operations that precede and accompany the leasing operations along their development. It is recognized in the doctrine that within the leasing operations we have a sequence of operations and contracts without which the final act, namely the lease agreement would not exist. We are referring to the sale-purchase contract signed by the financier with the supplier of goods, the mandate contract of the financier concluded with the user and the actual funding contract, the last two coexisting in the wording of the lease agreement. Through the study developed, we aimed to individualize concretely the specific subject of each of these legal operations, with the intention of consolidate the own identity of the lease agreement and of the leasing operations implicitly.

  2. New Trends in Leasing Accounting

    Directory of Open Access Journals (Sweden)

    Nicolae Traian Cristin

    2017-01-01

    An entity shall apply IFRS 16 Leasing contracts for annual periods beginning on or after 1 January 2019. IFRS 16 sets out the principles for the recognition, measurement, presentation and disclosure for accountimg of the leases. The objective is to ensure that leasing companies and locators provide relevant information in a way that accurately represents those transactions. Based on this information, users of financial statements can assess the effect that leases have on an entity's financial position, financial performance and cash flows.

  3. 75 FR 78632 - Consumer Leasing

    Science.gov (United States)

    2010-12-16

    ... The new threshold for exempt consumer leases in the CLA goes into effect on July 21, 2011. Accordingly... and 213.4) and when the availability of consumer leases on particular terms is advertised (Sec. 213.7... regulation also contain rules about advertising consumer leases. The information collection pursuant to...

  4. Sutter Buttes-the lone volcano in California's Great Valley

    Science.gov (United States)

    Hausback, Brain P.; Muffler, L.J. Patrick; Clynne, Michael A.

    2011-01-01

    The volcanic spires of the Sutter Buttes tower 2,000 feet above the farms and fields of California's Great Valley, just 50 miles north-northwest of Sacramento and 11 miles northwest of Yuba City. The only volcano within the valley, the Buttes consist of a central core of volcanic domes surrounded by a large apron of fragmental volcanic debris. Eruptions at the Sutter Buttes occurred in early Pleistocene time, 1.6 to 1.4 million years ago. The Sutter Buttes are not part of the Cascade Range of volcanoes to the north, but instead are related to the volcanoes in the Coast Ranges to the west in the vicinity of Clear Lake, Napa Valley, and Sonoma Valley.

  5. Mobile dental units: leasing or buying? A dollar-cost analysis.

    Science.gov (United States)

    Arevalo, Oscar; Saman, Daniel M; Bonaime, Alice; Skelton, Judy

    2010-01-01

    The decision to acquire a mobile dental unit is based on a standard capital budgeting analysis. The next step is to determine whether to obtain the use of the mobile dental unit by borrowing and purchasing or by leasing. As a financing mechanism, leases are simply another way of borrowing money to pay for the asset. To compare lease vs. debt as financial vehicles to acquiring a mobile dental unit. An estimate for a new mobile unit was obtained. Lease and loan proposals from financial lenders were collected. A cost of capital rate was chosen for comparison. Cash flows associated with borrowing and leasing vs. buying were determined fortwo different scenarios: for profit (FP) vs. not-for-profit (NFP), at 5 years. A dollar-cost analysis was utilized to determine the option with the lowest capitalized value. There was a net advantage to buying vs. leasing for both for FP and NFP organizations. Due to tax advantages, owning and leasing were substantially less expensive for FP than for NFP. Slight decreases in the monthly lease payments would make leasing competitive to the buying approach. Exploring alternative financing vehicles may allow dental programs to expand their services through the acquisition of a mobile unit. Though programs generally own assets, it is the use of the asset which is important rather than the ownership. Dental programs can find leasing an attractive alternative by offering access to capital with cash-flow advantages.

  6. PERPETUAL LEASE: FEATURES OF ACCOUNTING

    Directory of Open Access Journals (Sweden)

    Tetiana Yurchenko

    2017-03-01

    Full Text Available The article namely deals with the peculiarities of legal regulation of the right to use someone else's land for agricultural purposes under the perpetual lease contract. Recognition of the legitimacy of perpetual lease as an intangible asset and, therefore, the object of accounting was justified. The features of the primary account perpetual lease rights were analyzed. It was found that for documenting transactions receipt, commissioning, de-recognition perpetual lease specialized forms of primary documents is not installed. The main aspects of accounting reflection of land under perpetual lease contracts were identified and ways of their improving were developed. The period on which the land is transferred for use under perpetual lease contract was proposed. During the study, general scientific methods – induction, deduction, synthesis, analysis, dialectical, historical, generalizations and specific methods of accounting – documentation, evaluation, accounting records were used. Keywords: accounting, land, perpetual lease, intangible assets, the right to use.

  7. new lease accounting and health care.

    Science.gov (United States)

    Berman, Mindy

    2016-05-01

    Recently released lease accounting standards from the Financial Accounting Standards Board (FASB) present three significant challenges for healthcare organizations: All leases must be reported on a company's balance sheet, increasing liabilities on the balance sheets of healthcare organizations considerably. Contractual agreements not previously considered leases will now be treated as leases. Classification of some equipment leases could change.

  8. Creep failure analysis of butt welded tubes

    International Nuclear Information System (INIS)

    Browne, R.J.; Parker, J.D.; Walters, D.J.

    1981-01-01

    As part of a major research programme to investigate the influence of butt welds on the life expectancy of tubular components, a series of internal-pressure, stress-rupture tests have been carried out. Thick walled 1/2Cr 1/2Mo 1/4V tube specimens were welded with mild steel, 1Cr 1/2Mo steel, 2 1/4Cr 1Mo steel or nominally matching 1/2Cr 1/2Mo 1/4V steel to give a wide range of weld metal creep strengths relative to the parent tube. The weldments were tested at 565 0 C at two values of internal pressure, and gave failure lives of up to 44,000 hrs. Finite element techniques have been used to determine the stationary state stress distribution in the weldment which was represented by a three material model. Significant stress redistribution was indicated and these results enabled the position and orientation of cracking and the rupture life to be predicted. The theoretical and experimental results have been used to highlight the limitations of current design methods which are based on the application of the mean diameter hoop stress to the parent material stress rupture data. (author)

  9. Oil-Spill Analysis: Gulf of Mexico Outer Continental Shelf (OCS) Lease Sales, Eastern Planning Area, 2003-2007 and Gulfwide OCS Program, 2003-2042

    Science.gov (United States)

    2002-09-01

    The Federal Government plans to offer U.S. Outer Continental Shelf (OCS) lands in the Eastern Planning Area of the Gulf of Mexico (GOM) for oil and gas leasing. This report summarizes results of that analysis, the objective of which was to estimate the risk of oil-spill contact to sensitive offshore and onshore environmental resources and socioeconomic features from oil spills accidentally occurring from the OCS activities.

  10. Advantages and disadvantages of leasing

    Directory of Open Access Journals (Sweden)

    Katarzyna Wiśniewska

    2012-12-01

    Full Text Available The article is systematization of knowledge on leasing as a source of financing for enterprises. This paper defines the leasing and presented its nature according to the norms of civil, tax and accounting law. It shows the basic classification of leases and briefly describes each type. This article discusses the key benefits gained from using the financial tools and the most common business problems. Presented the consequences arising from the signing of the lease. Description was written based on literature studies on the issues of lease. Concerns the benefits and drawbacks arising from the lease agreement for use of this form of financing for enterprises. The article can help entrepreneurs in making the correct choice of the method of financing.

  11. 76 FR 35721 - Consumer Leasing

    Science.gov (United States)

    2011-06-20

    ... 213 Advertising, Consumer leasing, Consumer protection, Federal Reserve System, Reporting and... contains regulatory documents #0;having general applicability and legal effect, most of which are keyed #0...

  12. Leasing of nuclear installations

    International Nuclear Information System (INIS)

    Capaccioli, Enzo.

    1977-01-01

    The high costs to be borne in industrialised countries for expanding nuclear programmes make leasing, in terms of funding, an attractive proposition even in times of recession. This system is advantageous to both parties: the bodies providing funds make substantial profits without untoward risk, given the internationally-recognised regime of channelling liability onto the nuclear operator and because such contracts usually provide that ownership of the property involved will eventually be transferred to the operator. The latter obtains the sums needed by a simple, speedy procedure enabling him to start operations more quickly than if he had to seek funds by a more conventional method. The problem in Italy is that nuclear electricity generating plants are a State monopoly while leasing is a private enterprise. The Italian 1975 Siting Act provides a consultation procedure of regional and State authorities, with the ultimate decision taken by the latter. To maintain the momentum, arrangements could be made for leasing, before starting the licensing procedure proper according to the Act. (NEA) [fr

  13. Geographic patterns of cigarette butt waste in the urban environment.

    Science.gov (United States)

    Marah, Maacah; Novotny, Thomas E

    2011-05-01

    This reports the initial phase of a study to quantify the spatial pattern of cigarette butt waste in an urban environment. Geographic Information Systems (GIS) was used to create a weighted overlay analysis model which was then applied to the locations of businesses where cigarettes are sold or are likely to be consumed and venues where higher concentrations of butts may be deposited. The model's utility was tested using a small-scale litter audit in three zip codes of San Diego, California. We found that cigarette butt waste is highly concentrated around businesses where cigarettes are sold or consumed. The mean number of butts for predicted high waste sites was 38.1 (SD 18.87), for predicted low waste sites mean 4.8 (SD 5.9), psales and consumption. A GIS and weighted overlay model may be a useful tool in predicting urban locations of greater and lesser amounts of cigarette butt waste. These data can in turn be used to develop economic cost studies and plan mitigation strategies in urban communities.

  14. Bali Cattle Carcass Characteristic of Different Butt Shape Condition

    Science.gov (United States)

    Hafid, H.; Nuraini; Inderawati; Kurniawan, W.

    2018-02-01

    Carcass was main product on cattle slaughtering which contain beef for human consumption and it has high nutritional and economical value. Carcass production on cattle has been influenced by several factors, such as cattle breed, feed, and body conformation. Cattle Butt Shape was one of part cattle body conformation which allegedly has have positive correlation on produced carcass. This research was aimed to evaluate Butt Shape condition influenced on Bali cattle carcass characteristic. The research was using Bali cattle which slaughter in Kendari Slaughtering House (Rumah Potong Hewan/RPH - Kendari). The observation includes weighing, and measuring parts of carcass was conducted on 60 heads of Halal process slaughtered Bali cattle which traditionally maintained. The research parameters were carcass productivity parameters i.e: slaughtering weight, carcass weight and length, leg length and circumstances. Obtained data were analyzed using Complete Randomized Design and post hoc analyzed using Least Significant Different if have any influence. The research result showed that cattle Butt Shape condition have significant (pBali cattle carcass productivity parameters. Butt shape with B category was result the best carcass productivity compare the others, while C category was better than D. It can be concluded that body and carcass weight were linearly influenced by cattle butt shape.

  15. [Even cigarette butts can impact environment and health: preliminary considerations].

    Science.gov (United States)

    Martino, Gianrocco; Gorini, Giuseppe; Chellini, Elisabetta

    2013-01-01

    In Italy, every year about 72 billion of cigarette butts are thrown away in the environment. Cigarette butts represent 50% of the wastes of urban areas (parks, roads) in the world, and 40% of Mediterranean Sea wastes. In particular, total polluting load is constituted of 1,872 Bq millions of Polonium-210, assuming 75 mBq per cigarette butt, and 1,800 tons of volatile organic compounds. As a matter of fact, according to several surveys, cigarette butts are considered by smokers and non-smokers as a common and acceptable waste in the environment. In 2008, European Union issued a Directive on wastes considering the «extended producer responsibility» (i.e., every industry is liable for costs of collection, transport and disposal of its own products). In October 2012, the Italian Parliament proposed a bill that classifies cigarette butts as special wastes in the frame of this responsibility. It could be interesting in the future to follow the legislative process of that bill in the Italian Parliament in order to show how strong it will be supported.

  16. Geology of Gable Mountain-Gable Butte Area

    International Nuclear Information System (INIS)

    Fecht, K.R.

    1978-09-01

    Gable Mountain and Gable Butte are two ridges which form the only extensive outcrops of the Columbia River Basalt Group in the central portion of the Pasco Basin. The Saddle Mountains Basalt and two interbedded sedimentary units of the Ellensburg Formation crop out on the ridges. These include, from oldest to youngest, the Asotin Member (oldest), Esquatzel Member, Selah Interbed, Pomona Member, Rattlesnake Ridge Interbed, and Elephant Mountain Member (youngest). A fluvial plain composed of sediments from the Ringold and Hanford (informal) formations surrounds these ridges. The structure of Gable Mountain and Gable Butte is dominated by an east-west-trending major fold and northwest-southeast-trending parasitic folds. Two faults associated with the uplift of these structures were mapped on Gable Mountain. The geomorphic expression of the Gable Mountain-Gable Butte area resulted from the comlex folding and subsequent scouring by post-basalt fluvial systems

  17. MMS trims proposed schedule for OCS oil and gas lease sales

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the U.S. Interior Department has proposed only 18 Outer Continental Shelf oil and gas lease sales in its new 5 year schedule. Eleven of the sales are in the Gulf of Mexico, one off the east Coast, none off the West Coast, and six off Alaska. Congress has 60 days in which to reject the 5 year lease sale plan but is not expected to. An earlier draft plan called for 23 sales. The Minerals Management Service, which administers the offshore leasing program, the the new schedule emphasizes leasing of gas prone areas

  18. 78 FR 21582 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is proposing to approve revisions to the Butte County Air Quality Management...

  19. Equipment for Preparing Pipeline Position Butts for Welding

    Directory of Open Access Journals (Sweden)

    Lobanov L.M.

    2015-09-01

    Full Text Available The results of developments of the Ye.O.Paton Electric Welding Institute and its specialized departments on the designing national equipment models for preparation during the assembly the edges and butt ends of pipeline position butts with the diameter from 14 up to 159 mm, repair and modernization of power engineering objects, including the power units of nuclear and heat electric stations, in chemical and machine building, at enterprises of oil-gas complex and other branches of industry are presented.

  20. Teaching Ethics with Apartment Leases.

    Science.gov (United States)

    Pomerenke, Paula J.

    1998-01-01

    Describes an assignment in a corporate-communications class in which students examine the design and the language of their apartment leases. Discusses how this assignment teaches students about the Plain English laws and the need for plain English in leases and in ethics. (SR)

  1. 12 CFR 714.3 - Must you own the leased property in an indirect leasing arrangement?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Must you own the leased property in an indirect leasing arrangement? 714.3 Section 714.3 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS LEASING § 714.3 Must you own the leased property in an indirect leasing...

  2. 75 FR 53714 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-09-01

    ...)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan. SUMMARY: The Commission hereby gives... butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  3. LEASING AS IMPORTANT TOOL OF AIRLINE FINANCING

    Directory of Open Access Journals (Sweden)

    V. G. Afanasiev

    2014-01-01

    Full Text Available The article corers current state of airline financing using such instrument as aviation leasing indifferent forms, such as finance leasing its different forms, operational leasing and its different types, sale and lease back analyzed all pluses and minuses of each form. The main questions of Capetown Convention on international warranties concerning moving equipment also discussed.

  4. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in

  5. Butt-welding technology for double walled Polyethylene pipe

    International Nuclear Information System (INIS)

    Lee, Bo-Young; Kim, Jae-Seong; Lee, Sang-Yul; Kim, Yeong K.

    2012-01-01

    Highlights: ► We developed a butt welding apparatus for doubled walled Polyethylene pipe. ► We design the welding process by analyzing thermal behaviors of the material. ► We performed the welding and tested the welded structural performances. ► We also applied the same technology to PVC pipes. ► We verified the butt welding was successful and effective for the pipes with irregular sections. -- Abstract: In this study, mechanical analyses of a butt welding technology for joining Polyethylene pipe are presented. The pipe had unique structure with double wall, and its section topology was not flat. For an effective repair of leakage and replacements of the pipe, the butt welding technology was developed and tested. For the material characterizations, thermodynamic analyses such as thermal gravimetric analysis and differential scanning calorimetry were performed. Based on the test results, the process temperature and time were determined to ensure safe joining of the pipes using a hot plate apparatus. The welding process was carefully monitored by measuring the temperature. Then, the joined pipes were tested by various methods to evaluate the quality. The analyses results showed the detail process mechanism during the joining process, and the test results demonstrated the successful application of the technology to the sewage pipe repairs.

  6. Application Regarding the Butt-Welding Through Intermediate Melting

    Directory of Open Access Journals (Sweden)

    Tudorel Ene

    2006-10-01

    Full Text Available It consists in presenting butt welding procedure through intermediate melting and its usage for manufacturing cutting tools type drill, tap screw, reamer by welding the active part (made of high-speed steel to the tool tail (made of unalloyed steel wit low carbon.

  7. ANSYS Simulation of Residual Strains in Butt-welded Joints

    Directory of Open Access Journals (Sweden)

    A. Atroshenko

    2014-07-01

    Full Text Available The effect of thermal-strain cycle on residual strains in thin-walled circular seams of cylindrical shells using TIG butt welds was studied. Estimates were calculated using numerical modelling. The structure was made of corrosion-resistant austenitic steels.

  8. Regulating the disposal of cigarette butts as toxic hazardous waste.

    Science.gov (United States)

    Barnes, Richard L

    2011-05-01

    The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment.

  9. BLM Colorado Oil Shale Leases

    Data.gov (United States)

    Department of the Interior — KMZ file Format –This data set contains the Oil Shale Leases for the State of Colorado, derived from Legal Land Descriptions (LLD) contained in the US Bureau of Land...

  10. GAP WIDTH STUDY IN LASER BUTT-WELDING

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely related......In this paper the maximum allowable gap width in laser butt-welding is intensively studied. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0.5-2.0 m/min, the laser...... to the welding speed, (2) the larger laser power leads to the bigger maximum allowable gap width and (3) the focal point position has very little influence on the maximum gap width....

  11. Investigation and control of factors influencing resistance upset butt welding.

    OpenAIRE

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in production. In principle the welding process is rather simple, the materials to be joined are clamped between two electrodes and pressed together. Because there is an interface present with a higher resist...

  12. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO`s environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO`s areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation`s largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST`s Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management.

  13. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO's environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO's areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation's largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST's Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management

  14. 78 FR 49079 - Lease Modifications, Lease and Logical Mining Unit Diligence, Advance Royalty, Royalty Rates, and...

    Science.gov (United States)

    2013-08-12

    ... Management 43 CFR Parts 3000, 3400, 3430, et al. Lease Modifications, Lease and Logical Mining Unit Diligence... Lease Modifications, Lease and Logical Mining Unit Diligence, Advance Royalty, Royalty Rates, and Bonds... producing coal and has achieved diligence; (3) the value of any unpaid bonus payments; and (4) 100 percent...

  15. Inventory of Owned and Leased Properties (IOLP)

    Data.gov (United States)

    General Services Administration — The Inventory of Owned and Leased Properties (IOLP) allows users to search properties owned and leased by the General Services Administration (GSA) across the United...

  16. 77 FR 69735 - Consumer Leasing (Regulation M)

    Science.gov (United States)

    2012-11-21

    ... Part 213 Advertising, Consumer leasing, Consumer protection, Federal Reserve System, Reporting and recordkeeping requirements. 12 CFR Part 1013 Advertising, Consumer leasing, Reporting and recordkeeping... contains regulatory documents #0;having general applicability and legal effect, most of which are keyed #0...

  17. Operating-Lease Disclosures: an empirical investigation

    OpenAIRE

    Lückerath-Rovers, Mijntje

    2007-01-01

    textabstractIn 2008, the International Accounting Standards Board (IASB), in cooperation with the Financial Accounting Standards Board (FASB), will issue a new proposal to change the current accounting regulation with respect to leasing to an alternative approach. This new lease-accounting approach, called the “asset and liability approach”, capitalises all leases on the balance sheet. This contrasts with the current lease-accounting approach, called the “risk and reward approach”, which disc...

  18. 32 CFR 644.136 - Leasing guidelines.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Leasing guidelines. 644.136 Section 644.136 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Acquisition Acquisition by Leasing § 644.136 Leasing guidelines. Division and District...

  19. 23 CFR 710.407 - Leasing.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Leasing. 710.407 Section 710.407 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Real Property Management § 710.407 Leasing. (a) Leasing of real property acquired with title 23 of...

  20. Formation of the oil and gas lease

    International Nuclear Information System (INIS)

    Gillespie, E.M.; Piercy, J.R.

    1998-01-01

    The legal nature of an oil and gas lease was described and the challenges associated with working with the freehold oil and gas lease were discussed. This paper also reviewed the formalities of execution under seal, issues relating to capacity of the executing party, ability of an executor of an estate to grant the lease, and homestead rights. Precautions that should be taken to ensure that oil and gas lease documents are properly executed so as not to void a lease are also discussed. 46 refs

  1. Lease of agricultural land in public ownership

    Directory of Open Access Journals (Sweden)

    Baturan Luka

    2014-01-01

    Full Text Available This paper analyzes the legal norms which regulate leasing of agricultural land in public ownership. The basic hypothesis is that the main goal of land leasing should be to achieve an efficient allocation and maximization of public rental income. It was concluded that we should eliminate all restrictions that serve as barriers to market allocation. These include provisions that restrict some groups from participating in the land lease auctions, then the preemptive right of lease, as well as the ban on subleasing. It also criticizes the application of the principles of affectation, or restriction of freedom of local governments in the use of funds received from land leasing.

  2. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.

  3. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    International Nuclear Information System (INIS)

    1996-03-01

    This document has been prepared by the US Department of Energy's (DOE's) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE's Operations Office and Energy Technology Centers

  4. Federal coal lease readjustments: will reason prevail

    Energy Technology Data Exchange (ETDEWEB)

    Margolf, C W

    1988-01-01

    After 1920, when the US Congress passed the Mineral Lands Leasing Act (MLLA), coal owned by the Federal government could only be developed by leasing under the MLLA. Most Federally owned coal is in the west, where the Federal government enjoys a near monopoly in coal ownership and its development. In 1976, congress enacted the Federal Coal Leasing Amendments ACT (FCLAA), over President Ford's veto, in order to: increase rents and royalties on Federal coal leases; force lessees holding Federal coal leases not in production to open mines on the non-producing leases; and end 'speculation' in Federal coal leases. The book maintains that in passing the FCLAA, Congress did not understand the western coal industry, and neither did the Department of the Interior (DOI) in concluding that Congress had mandated that the FCLAA must be applied to pre-FCLAA leases, even those in production, when such leases are readjusted. In the resulting lawsuits, the western coal industry has not been explained to the Federal courts and the decisions regarding the applicability of the FCLAA upon readjustment of pre-FCLAA leases have consequently been wrong. The book examines the record to date and aims to demonstrate the validity of these conclusions. It also describes which actions the DOI should have taken to accomplish the objectives of congress set forth in the FCLAA, to readjust pre-FCLAA leases without litigation.

  5. Preliminary geologic map of the Sleeping Butte volcanic centers

    International Nuclear Information System (INIS)

    Crowe, B.M.; Perry, F.V.

    1991-07-01

    The Sleeping Butte volcanic centers comprise two, spatially separate, small-volume ( 3 ) basaltic centers. The centers were formed by mildly explosive Strombolian eruptions. The Little Black Peak cone consists of a main scoria cone, two small satellitic scoria mounds, and associated lobate lava flows that vented from sites at the base of the scoria cone. The Hidden Cone center consists of a main scoria cone that developed on the north-facing slope of Sleeping Butte. The center formed during two episodes. The first included the formation of the main scoria cone, and venting of aa lava flows from radial dikes at the northeast base of the cone. The second included eruption of scoria-fall deposits from the summit crater. The ages of the Little Black Peak and the Hidden Cone are estimated to be between 200 to 400 ka based on the whole-rock K-Ar age determinations with large analytical undertainty. This age assignment is consistent with qualitative observations of the degree of soil development and geomorphic degradation of volcanic landforms. The younger episode of the Hidden Cone is inferred to be significantly younger and probably of Late Pleistocene or Holocene age. This is based on the absence of cone slope rilling, the absence of cone-slope apron deposits, and erosional unconformity between the two episodes, the poor horizon- development of soils, and the presence of fall deposits on modern alluvial surfaces. Paleomagnetic data show that the centers record similar but not identical directions of remanent magnetization. Paleomagnetic data have not been obtained for the youngest deposits of the Hidden Cone center. Further geochronology, soils, geomorphic, and petrology studies are planned of the Sleeping Butte volcanic centers 20 refs., 3 figs

  6. Littered cigarette butts as a source of nicotine in urban waters

    Science.gov (United States)

    Roder Green, Amy L.; Putschew, Anke; Nehls, Thomas

    2014-11-01

    The effect of nicotine from littered cigarette butts on the quality of urban water resources has yet to be investigated. This two-part study addresses the spatial variation, seasonal dynamics and average residence time of littered cigarette butts in public space, as well as the release of nicotine from cigarette butts to run-off in urban areas during its residence time. Thereby, we tested two typical situations: release to standing water in a puddle and release during alternating rainfall and drying. The study took place in Berlin, Germany, a city which completely relies on its own water resources to meet its drinking water demand. Nine typical sites located in a central district, each divided into 20 plots were studied during five sampling periods between May 2012 and February 2013. The nicotine release from standardized cigarette butts prepared with a smoking machine was examined in batch and rainfall experiments. Littered cigarette butts are unevenly distributed among both sites and plots. The average butt concentration was 2.7 m-2 (SD = 0.6 m-2, N = 862); the maximum plot concentration was 48.8 butts m-2. This heterogeneity is caused by preferential littering (gastronomy, entrances, bus stops), redistribution processes such as litter removal (gastronomy, shop owners), and the increased accumulation in plots protected from mechanized street sweeping (tree pits, bicycle stands). No significant seasonal variation of cigarette butt accumulation was observed. On average, cigarette butt accumulation is characterized by a 6 days cadence due to the rhythm and effectiveness of street sweeping (mean weekly butt accumulation rate = 0.18 m-2 d-1; SD = 0.15 m-1). Once the butt is exposed to standing water, elution of nicotine occurs rapidly. Standardized butts released 7.3 mg g-1 nicotine in a batch experiment (equivalent to 2.5 mg L-1), 50% of which occurred within the first 27 min. In the rainfall experiment, the cumulative nicotine release from fifteen consecutive

  7. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...... penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least...

  8. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  9. Observations of elk movement patterns on Fossil Butte National Monument

    Science.gov (United States)

    Olexa, Edward M.; Soileau, Suzanna Carrithers.; Allen, Leslie A.

    2014-01-01

    The elk herd that frequents Fossil Butte National Monument, a subset of the West Green River elk population, provides visitors with seasonal opportunities to view an iconic species of the western United States. Throughout the year, these elk range across a variety of private, State, and Federal lands within close proximity to the Monument. These lands are managed differently for various uses which can create challenging wildlife-management issues and influence the herd’s seasonal movements and distribution. Research lead by the USGS investigates some of the factors associated with these seasonal changes.

  10. 30 CFR 256.50 - Dating of leases.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Dating of leases. 256.50 Section 256.50 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE LEASING OF SULPHUR OR OIL AND GAS IN THE OUTER CONTINENTAL SHELF Issuance of Leases § 256.50 Dating of leases. All leases issued under...

  11. 12 CFR 614.4356 - Farm Credit Leasing Services Corporation.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Farm Credit Leasing Services Corporation. 614... OPERATIONS Lending and Leasing Limits § 614.4356 Farm Credit Leasing Services Corporation. The Farm Credit Leasing Services Corporation may enter into a lease agreement with a lessee if the consolidated amount of...

  12. 77 FR 39735 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines

    Science.gov (United States)

    2012-07-05

    ... revocation of the antidumping duty orders on stainless steel butt-weld pipe fittings From Italy, Malaysia... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines Determination On the basis of the...

  13. 75 FR 76025 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-12-07

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-376 and 563-564 (Third Review)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... steel butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  14. 78 FR 33897 - Atlantic Wind Lease Sale 2 (ATLW2) Commercial Leasing for Wind Power on the Outer Continental...

    Science.gov (United States)

    2013-06-05

    ... Management Atlantic Wind Lease Sale 2 (ATLW2) Commercial Leasing for Wind Power on the Outer Continental Shelf Offshore Rhode Island and Massachusetts-- Final Sale Notice and Commercial Wind Lease Issuance and...; MMAA104000] Atlantic Wind Lease Sale 2 (ATLW2) Commercial Leasing for Wind Power on the Outer Continental...

  15. 77 FR 14002 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results...

    Science.gov (United States)

    2012-03-08

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results of the... Duty Orders on Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines'' from... Commerce (the Department) initiated sunset reviews of the antidumping duty orders on stainless steel butt...

  16. 77 FR 42697 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation...

    Science.gov (United States)

    2012-07-20

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation of... from Italy, Malaysia, and the Philippines.\\2\\ \\1\\ See Antidumping Duty Orders: Stainless Steel Butt...), titled Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines (Investigation...

  17. 76 FR 67473 - Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and The Philippines; Institution of...

    Science.gov (United States)

    2011-11-01

    ... Concerning the Antidumping Duty Orders on Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and... stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be likely to lead to... antidumping duty orders on imports of stainless steel butt-weld pipe fittings from Italy, Malaysia, and the...

  18. Oyster leases in Louisiana, Geographic NAD83, LOSCO (1997) [oyster_leases_USACE_1997

    Data.gov (United States)

    Louisiana Geographic Information Center — This data set indicates the locations of oyster leases in Louisiana. The lease areas should be polygons, however, the source data has very poor topology including...

  19. 30 CFR 285.201 - How will MMS issue leases?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How will MMS issue leases? 285.201 Section 285... Energy Leases General Lease Information § 285.201 How will MMS issue leases? The MMS will issue leases on... noncompetitively, as provided under §§ 285.230 and 285.232. We will issue leases on forms approved by MMS and will...

  20. Credit constraints, consumer leasing and the automobile replacement decision

    OpenAIRE

    Kathleen W. Johnson

    1999-01-01

    This paper presents a model of consumer automobile replacement in the presence of leasing. The model incorporates credit constraints to distinguish between the leasing and purchasing options. It demonstrates how leasing increases the probability that a household replaces its automobile and how households that lease choose higher quality automobiles. The qualitative choice model of the household's decision to lease provides support for the observation that households that lease face credit con...

  1. Leveraged Leasing in the Federal Sector.

    Science.gov (United States)

    1983-12-01

    entity obtains cash while the private investors can depreciate the property and obtain investment tax credits and other tax benefits. The costs are borne...lease from a common base point to familiarize the reader with the applicable portions of generally accepted accounting principles, GAAP , and how they...chapter identifies the differences between a basic lease and a leveraged lease in terms of structure and accounting requirements relative to GAAP

  2. Lease Accounting in Australia: Further Empirical Evidence

    OpenAIRE

    Hassan, Salleh; Christopher, Theo

    1998-01-01

    Key words: Australia; Accounting standard; Efficient contracting; Lease accounting; Signalling The objective of this study is to examine the economic factors motivating Australian listed lessee firms to adopt capitalization of finance leases policy from 1985 to 1987 as permitted by the transitional provision of AAS 17. Capitalization is considered as the preferred accounting policy for finance leases compared to footnote disclosure. Adopting a joint efficient contracting and quality signaling pers...

  3. Lease Operations Environmental Guidance Document

    Energy Technology Data Exchange (ETDEWEB)

    Bureau of Land Management

    2001-02-14

    This report contains discussions in nine different areas as follows: (1) Good Lease Operating Practices; (2) Site Assessment and Sampling; (3) Spills/Accidents; (4) Containment and Disposal of Produced Waters; (5) Restoration of Hydrocarbon Impacted Soils; (6) Restoration of Salt Impacted Soils; (7) Pit Closures; (8) Identification, Removal and Disposal of Naturally Occurring Radioactive Materials (NORM); and (9) Site Closure and Construction Methods for Abandonment Wells/Locations. This report is primary directed towards the operation of oil and gas producing wells.

  4. Optimal Lease Contract for Remanufactured Equipment

    Science.gov (United States)

    Iskandar, B. P.; Wangsaputra, R.; Pasaribu, U. S.; Husniah, H.

    2018-03-01

    In the last two decades, the business of lease products (or equipment) has grown significantly, and many companies acquire equipment through leasing. In this paper, we propose a new lease contract under which a product (or equipment) is leased for a period of time with maximum usage per period (e.g. 1 year). This lease contract has only a time limit but no usage limit. If the total usage per period exceeds the maximum usage allowed in the contract, then the customer (as a lessee) will be charged an additional cost. In general, the lessor (OEM) provides a full coverage of maintenance, which includes PM and CM under the lease contract. It is considered that the lessor offers the lease contract for a remanufactured product. We presume that the price of the lease contract for the remanufactured product is much lower than that of a new one, and hence it would be a more attractive option to the customer. The decision problem for the lessee is to select the best option offered that fits to its requirement, and the decision problem for the lessor is find the optimal maintenance efforts for a given price of the lease option offered. We first find the optimal decisions independently for each party, and then the joint optimal decisions for both parties.

  5. Determinants of leasing business in emerging country

    Directory of Open Access Journals (Sweden)

    Pariang Siagian

    2017-03-01

    Full Text Available The primary purpose of this paper is to examine leasing business in Indonesia, if there is any effect of leasing literacy to the access into leasing company, motivation to buy and ability to pay liabilities. The research’s object is customers of leasing companies who have been buying leasing products and live around Jakarta. While the methodology used will be the qualitative method by using survey and questionnaire. The outcomes revealed that 68.5% of respondents have the average income of less than 5 million per month, and the type of product leased is dominated by motorcycles and cars. Furthermore, the result of regression analysis is the literacy to the access into leasing company has no effect. But on the other hand, the result shows that there is an effect of literacy on motivation and ability to pay liabilities. From this study, it can be concluded that generally, customers do not care about the insight into leasing business. Most of the customers used the literacy for to get the products and to be able to pay the installments obligations. Hence, they need sufficient information about leasing company and its services.

  6. Leasing instruments of high-rise construction financing

    Science.gov (United States)

    Aleksandrova, Olga; Ivleva, Elena; Sukhacheva, Viktoria; Rumyantseva, Anna

    2018-03-01

    The leasing sector of the business economics is expanding. Leasing instruments for high-rise construction financing allow to determine the best business behaviour in the leasing economy sector, not only in the sphere of transactions with equipment and vehicles. Investments in high-rise construction have a multiplicative effect. It initiates an active search and leasing instruments use in the economic behaviour of construction organizations. The study of the high-rise construction sector in the structure of the leasing market participants significantly expands the leasing system framework. The scheme of internal and external leasing process factors influence on the result formation in the leasing sector of economy is offered.

  7. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    International Nuclear Information System (INIS)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. WETO's environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies

  8. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. WETO`s environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies.

  9. Features of residual stresses in duplex stainless steel butt welds

    Science.gov (United States)

    Um, Tae-Hwan; Lee, Chin-Hyung; Chang, Kyong-Ho; Nguyen Van Do, Vuong

    2018-04-01

    Duplex stainless steel finds increasing use as an alternative to austenitic stainless steel, particularly where chloride or sulphide stress corrosion cracking is of primary concern, due to the excellent combination of strength and corrosion resistance. During welding, duplex stainless steel does not create the same magnitude or distribution of weld-induced residual stresses as those in welded austenitic stainless steel due to the different physical and mechanical properties between them. In this work, an experimental study on the residual stresses in butt-welded duplex stainless steel is performed utilizing the layering technique to investigate the characteristics of residual stresses in the weldment. Three-dimensional thermos-mechanical-metallurgical finite element analysis is also performed to confirm the residual stress measurements.

  10. BUSTED BUTTE TEST FACILITY GROUND SUPPORT CONFIRMATION ANALYSIS

    International Nuclear Information System (INIS)

    Bonabian, S.

    1998-01-01

    The main purpose and objective of this analysis is to confirm the validity of the ground support design for Busted Butte Test Facility (BBTF). The highwall stability and adequacy of highwall and tunnel ground support is addressed in this analysis. The design of the BBTF including the ground support system was performed in a separate document (Reference 5.3). Both in situ and seismic loads are considered in the evaluation of the highwall and the tunnel ground support system. In this analysis only the ground support designed in Reference 5.3 is addressed. The additional ground support installed (still work in progress) by the constructor is not addressed in this analysis. This additional ground support was evaluated by the A/E during a site visit and its findings and recommendations are addressed in this analysis

  11. Use of pulsed arc welding for butt joint fabrication

    International Nuclear Information System (INIS)

    Merkulov, B.A.

    1977-01-01

    A technology of pulsed-arc butt welding with periodic wire feed to the welding zone has been developed. The pulsed arc is suitable both for submerged and gas-shielded weldings. The technology proposed has some advantages over the stationary-arc welding. Control of the amplitude-frequency characteristics of the process enables one to affect melting and crystallization conditions of the welding crater, weld shape, relation between melting and deposited metal section areas, etc., as well as to reduce heat contribution to the base metal. The new process is shown to be applicable in power engineering. Automatic submerged welding conditions are given for low-carbon and pearlitic heat-resistant steels

  12. Critical reflections on the Chemical Leasing concept

    NARCIS (Netherlands)

    Lozano, Rodrigo; Carpenter, Angela; Lozano, Francisco J.

    Chemical Leasing has been developed as a collaborative business model to complement the two main approaches (policy initiatives and scientific/ technological) used to foster green chemistry and sustainable chemistry. Chemical Leasing is based on using chemicals more efficiently, reducing waste, and

  13. Operating-Lease Disclosures: an empirical investigation

    NARCIS (Netherlands)

    M. Lückerath-Rovers (Mijntje)

    2007-01-01

    textabstractIn 2008, the International Accounting Standards Board (IASB), in cooperation with the Financial Accounting Standards Board (FASB), will issue a new proposal to change the current accounting regulation with respect to leasing to an alternative approach. This new lease-accounting approach,

  14. 12 CFR 560.41 - Leasing.

    Science.gov (United States)

    2010-01-01

    ... principal and interest payments that a lessor would receive if the finance lease were structured as a market... property at the expiration of the term of the lease. (c) Finance leasing—(1) Investment limits. A Federal... loans), 5(c)(2)(A) (commercial, business, corporate or agricultural loans), 5(c)(2)(B) (nonresidential...

  15. 29 CFR 779.225 - Leased departments.

    Science.gov (United States)

    2010-07-01

    ..., Franchise and Other Business Arrangements § 779.225 Leased departments. (a) As stated in section 3(r) of the... without) a separate entrance, and operates under a separate name, with his own separate employees and... “leased department” and will not be included in the same enterprise with the lessor. (e) The employees of...

  16. Application of Securitization of Leasing Assets

    Directory of Open Access Journals (Sweden)

    Igor Viktorovich Linev

    2014-01-01

    Full Text Available Securitization of leasing assets was widely adopted abroad within the last decades. Securitization of leasing assets usually is meant as process of formation of a portfolio based on future leasing payments of one and (or more leasing company and sale of securities to investors for the subsequent refinancing of leasing operations. These securities can be bonds, actions or bills. Thus the asset leased, acts as providing these papers. Nomenclature of property includes office, medical (first of all, stomatology, training, video the equipment, and also a car, motor-equipment, towers of cellular communication production of heavy mechanical engineering and computers. The essence of securitization of leasing assets consists in isolation of streams of leasing payments from risk of bankruptcy of the leasing company. As the considered mechanism has the greatest development in the USA, so far as consideration of experience of its application in this country is represented especially actual. The special attention is deserved by a question of decrease in credit risk of the investor. External and internal providing is applied to its decision in different types. Interest of participants in securitization of leasing assets consists in distribution of risks between them, emergence of a new source of financing, depreciation of attracted resources, increase of liquidity of a leasing portfolio and optimization by management by balance of the enterprise. Appeal of this tool to the leasing company in a case when it has no available own funds for business development, represents separate interest. Securitization allows the leasing company to expand sources of attraction of the capital and to receive a reserve for the future, and also to broaden the sphere of options of activity and to give it new opportunities for financing of projects. Widespread introduction of schemes of securitization in practice of the Russian leasing business, requires development, and on some

  17. Leasing wind turbines (and its alternatives)

    International Nuclear Information System (INIS)

    Johns, Jonathan H.

    1999-01-01

    The financing of wind farms has historically consisted of a mixture of traditional debt and equity, with debt generally being provided by high street or specialist banks, through inter-company loans, or from International Funding Agencies (IFA's) via National Funding Agencies in developing countries. The use of more innovative financing methods has to date been limited. One possible methods of attracting finance for wind farms is the leasing of wind turbines, and this paper sets out the reasons leasing is particularly appropriate for renewable energy (RE) projects (in particular wind farms), the effect leasing may have on returns available to investors, and some of the obstacles that have to be overcome by the RE and wind industry to increase the utilisation of leasing. This paper concludes by discussing the possibility of using a pan-European leasing company as means of providing overseas aid to developing countries, thereby facilitating the implementation of wind energy in these important regions. (Author)

  18. INFLUENCE FACTORS FOR LEASING MARKET CONTRACTS

    Directory of Open Access Journals (Sweden)

    Oana BĂRBULESCU

    2016-11-01

    Full Text Available This paper aims to investigate the relationship between leasing contracts and some factors that influence the value of these contracts. In order to do this, we have decided on some quantitative marketing research by appealing to statistics for accomplishing the objectives that we have set: to find a correlation between the turnover percentage assigned to leasing expenses and several influence factors. This study indicated that the more contracts are signed by a firm, the more likely is to assign a bigger fraction of the income to each new leasing contract. The study confirmed that bigger companies are relying more on leasing as a way of financing than small companies. This study also discovered that companies with more employees are using larger contracts in order to sustain their activity. The findings are expected to contribute to adjusting the offers by the leasing companies, taking into consideration these factors and to using these factors in order to better predict the market evolution.

  19. 78 FR 21540 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Direct... Quality Management District (BCAQMD) and Sacramento Metropolitan Air Quality Management District (SMAQMD...

  20. Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding

    Science.gov (United States)

    2013-05-01

    H.K.D.H. Bhadeshia, A Model for the Microstruc- ture of Some Advanced Bainitic Steels , Mater. Trans., 1991, 32, p 689–696 19. G.J. Davies and J.G. Garland...REPORT Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding 14. ABSTRACT 16. SECURITY...Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding Report Title ABSTRACT A fully coupled (two-way

  1. 18 CFR 367.18 - Criteria for classifying leases.

    Science.gov (United States)

    2010-04-01

    ... the lessee) must not give rise to a new classification of a lease for accounting purposes. ... classifying the lease. (4) The present value at the beginning of the lease term of the minimum lease payments... taxes to be paid by the lessor, including any related profit, equals or exceeds 90 percent of the excess...

  2. 30 CFR 256.80 - Leases of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Leases of other minerals. 256.80 Section 256.80 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE LEASING OF SULPHUR OR OIL AND GAS IN THE OUTER CONTINENTAL SHELF Section 6 Leases § 256.80 Leases of other minerals. The...

  3. 49 CFR 639.33 - Management of leased assets.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Management of leased assets. 639.33 Section 639.33..., DEPARTMENT OF TRANSPORTATION CAPITAL LEASES Lease Management § 639.33 Management of leased assets. Each recipient must maintain an inventory of capital assets acquired by standard FTA project management...

  4. 47 CFR 76.978 - Leased access annual reporting requirement.

    Science.gov (United States)

    2010-10-01

    ... against the cable system with the Commission or a Federal district court regarding a commercial leased..., which provides the following information for the calendar year: (1) The number of commercial leased... commercial leased access channel. (3) The rates the cable system charges for full-time and part-time leased...

  5. 47 CFR 1.9020 - Spectrum manager leasing arrangements.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Spectrum manager leasing arrangements. 1.9020... Leasing General Policies and Procedures § 1.9020 Spectrum manager leasing arrangements. (a) Overview... may enter into a spectrum manager leasing arrangement, without the need for prior Commission approval...

  6. 77 FR 21803 - Notice of Competitive Coal Lease Sale, Colorado

    Science.gov (United States)

    2012-04-11

    ..., COC-70615] Notice of Competitive Coal Lease Sale, Colorado AGENCY: Bureau of Land Management, Interior... described below in Gunnison County, Colorado, will be offered for competitive lease by sealed bid in accordance with the provisions of the Mineral Leasing Act of 1920, as amended. DATES: The lease sale will be...

  7. 77 FR 71612 - Atlantic Wind Lease Sale 2 (ATLW2) Commercial Leasing for Wind Power on the Outer Continental...

    Science.gov (United States)

    2012-12-03

    ... Wind Lease Sale 2 (ATLW2) Commercial Leasing for Wind Power on the Outer Continental Shelf Offshore...), Interior. ACTION: Proposed Sale Notice for commercial leasing for wind power on the Outer Continental Shelf... sale of commercial wind energy leases on the Outer Continental Shelf (OCS) offshore Rhode Island and...

  8. 25 CFR 162.605 - Negotiation of leases.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Negotiation of leases. 162.605 Section 162.605 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER LEASES AND PERMITS Non-Agricultural Leases § 162.605 Negotiation of leases. (a) Leases of individually owned land or tribal land may be negotiated by those owners or their...

  9. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

  10. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    of "reference" welds are made and compared to sheets with the edges shear cut. The gap distance is precisely controlled by inserting spacers between the sheets. In the tests the gap is set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with thickness? of 0.75 and 1.25 mm with and without zinc......When butt-welding metal sheets with high power lasers the gap distance between the sheets determine the final quality of the seam. In a number of systematic laboratory experiments the critical gap distance that results in sound beads is identified. By grinding the edges of the sheets, a number...... coating were analysed. A total of 120 welds are made at different welding speeds.As quality norm DIN 8563 is used to divide the welds into quality classes. Since this norm only deals with surface defects a number of welds are also x-ray photographed.According to DIN 8563 the welds have classes of either B...

  11. Residual-stress distributions near stainless steel butt weldments

    International Nuclear Information System (INIS)

    Elligson, W.A.; Shack, W.J.

    1978-01-01

    Concern for the integrity of stainless steel butt-weldments in boiling-water-reactor (BWR) piping systems has stimulated study of the conditions that cause stress corrosion cracking (SCC) in the heat-affected zones (HAZ) of the weldments. It is generally agreed that a high stress exceeding the initial yield strength is one of the essential elements for crack initiation. Since design procedures usually ensure that load stresses are below initial yield, the source of the high stresses necessary to produce SCC is thought to be the residual stresses due to welding. To examine the level of residual stresses in the weldments of interest, bulk residual stresses were measured on 100 mm (4-in.) and 254 mm (10-in.) diameter Schedule 80 piping weldments using strain relief techniques. Both laboratory welded specimens and field welded specimens from reactors in service were studied. Axial bulk residual stress distributions were obtained at 45 0 intervals around the circumference. At each azimuthal position, the residual stresses were measured at seven axial positions: on the weld centerline and 13, 20, and 25 mm on either side of the weld centerline on both the inside and outside surfaces

  12. Tobacco industry responsibility for butts: a Model Tobacco Waste Act.

    Science.gov (United States)

    Curtis, Clifton; Novotny, Thomas E; Lee, Kelley; Freiberg, Mike; McLaughlin, Ian

    2017-01-01

    Cigarette butts and other postconsumer products from tobacco use are the most common waste elements picked up worldwide each year during environmental cleanups. Under the environmental principle of Extended Producer Responsibility, tobacco product manufacturers may be held responsible for collection, transport, processing and safe disposal of tobacco product waste (TPW). Legislation has been applied to other toxic and hazardous postconsumer waste products such as paints, pesticide containers and unused pharmaceuticals, to reduce, prevent and mitigate their environmental impacts. Additional product stewardship (PS) requirements may be necessary for other stakeholders and beneficiaries of tobacco product sales and use, especially suppliers, retailers and consumers, in order to ensure effective TPW reduction. This report describes how a Model Tobacco Waste Act may be adopted by national and subnational jurisdictions to address the environmental impacts of TPW. Such a law will also reduce tobacco use and its health consequences by raising attention to the environmental hazards of TPW, increasing the price of tobacco products, and reducing the number of tobacco product retailers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  13. Geopressure industrial forums, newsletter and lease support. Final report, April 7, 1981-December 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Knutson, C.F.

    1983-12-01

    In the course of this contract C. K. GeoEnergy: (1) planned, organized, conducted, and reported on six DOE/Industry Forum meetings where the progress of DOE's resource development program was outlined and discussed (these six forum meetings included three meetings of the Drilling and Testing Subgroup and three meetings of the Overview Group), (2) prepared and distributed 15 newsletters, and (3) prepared three reports for DOE lease support. This final report includes summaries of each of the forum meetings as well as the three lease support meetings and the newsletter program.

  14. PROBLEMS AND PROSPECTS FOR THE DEVELOPMENT OF THE FIRST MARKET OF LEASE LAND IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Hunko L.A.

    2017-08-01

    Full Text Available The land is the main asset of the farmer. The basic production of agricultural products, the food security of the state and its export potential today depend directly on the ability of agricultural producers to conduct sustainable production. However, in addition to the natural elements that stand in the way of stabilizing the situation in the field of agriculture, we also have a chronic presence of numerous "man-made" problems that remain unsettled for years. One of the most significant and painful of them is the state registration of the right to lease land. Long-term disorder, corporate wars between state authorities for the right to land relations, negligent attitude to information on land rights and their encumbrances, the shifting of competence among registrars of land tenure rights continue to cause complaints from agricultural producers. But the peculiarities of the legal regulation of the state registration of the right to lease land for agricultural purposes did not become the subject of a separate scientific study. Consequently, the purpose of this work is to study and analyze the problems of legal regulation of state registration of the right to lease land and to find an acceptable option for their further solution. Since the reform of the agrarian sector of Ukraine, the most common form of land use in agricultural production is the use of land by agricultural producers on a lease. The advantage of leasing relations in agricultural production is enshrined in the Concept of the State Target Program for Land Relations Development in Ukraine for the period up to 2020, which was approved by the Resolution of the Cabinet of Ministers of Ukraine dated June 17, 2009 No. 743-p. The right to lease a land plot is mediated by a contract concluded in accordance with the Article 20 of the Law of Ukraine "On land lease" is subject to mandatory state registration,on the other hand in Article 125 of the Land Code of Ukraine, it is stated that the

  15. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    International Nuclear Information System (INIS)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib; Haruman, Esa; Chau, Chan Yin

    2011-01-01

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy

  16. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib [Universiti Teknologi MARA, Kuala Lumpur (Malaysia); Haruman, Esa [Bakrie University, Jakarta (Indonesia); Chau, Chan Yin [ESI Group, Kuala Lumpur (Malaysia)

    2011-10-15

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy.

  17. Financial distress prediction and operating leases

    NARCIS (Netherlands)

    Lückerath – Rovers, M.

    2009-01-01

    This study investigates whether including operating lease commitments in financial distress prediction models would increase the classification accuracy of these models. Classification accuracy measures the percentages of correctly classified companies in either of the two categories (healthy or

  18. Lease vs. Purchase in Defense Acquisition

    National Research Council Canada - National Science Library

    Hensley, Carlton L; Tinjum, Archie L

    2008-01-01

    With declining budgets and consolidation in the defense industry, should competition between prime and sub-prime contractors be fostered through innovative lease arrangements similar to the Navy's TAKX...

  19. The Search for Hot Jupiters using Red Buttes Observatory

    Science.gov (United States)

    Sorber, Rebecca L.; Kar, Aman; Hancock, Daniel A.; Leuquire, Jacob D.; Suhaimi, Afiq; Kasper, David; Jang-Condell, Hannah

    2018-01-01

    The goal of this research is to use the University of Wyoming’s Red Buttes Observatory (RBO) to perform manual, remote, or automated observations of transiting exoplanet candidates. The data contributes to discovery of star systems that include never before identified exoplanets. RBO houses a 0.6-meter telescope and is located approximately 10 miles south of the University of Wyoming’s campus. Our targets are catalogued by the KELT (Kilodegree Extremely Little Telescope) Survey, a photometric search for transiting exoplanets around bright main sequence stars. The KELT Follow-up Network (KELT-FUN), a collaboration of small-aperture telescope users located all over the world, confirms new exoplanet candidates. As part of KELT-FUN, students use the RBO to monitor candidates identified by the KELT team. RBO typically detects transits around stars that are 8-12 in V magnitude, with transit durations of ~1-4 hours and full depth relative changes in brightness above 2 mmags. Using AstroImageJ, we process the data and we look for any indication of a transit occurrence in the processed lightcurve which might confirm the presence of the potential exoplanet. Our team has contributed over 50 light curves to KELT-FUN to date. We are able to compare our data with simultaneous observations by other members of KELT-FUN to maximize the utility of our observations. This project gives undergraduates an authentic scientific research experience, learning how to operate an observatory, process data, and participate in a scientific collaboration.

  20. Emerging accounting trends accounting for leases.

    Science.gov (United States)

    Valletta, Robert; Huggins, Brian

    2010-12-01

    A new model for lease accounting can have a significant impact on hospitals and healthcare organizations. The new approach proposes a "right-of-use" model that involves complex estimates and significant administrative burden. Hospitals and health systems that draw heavily on lease arrangements should start preparing for the new approach now even though guidance and a final rule are not expected until mid-2011. This article highlights a number of considerations from the lessee point of view.

  1. Microstructure and mechanical performance of autogenously fibre laser beam welded Ti-6242 butt joints

    Energy Technology Data Exchange (ETDEWEB)

    Kashaev, Nikolai, E-mail: nikolai.kashaev@hzg.de; Pugachev, Dmitry; Ventzke, Volker; Fomin, Fedor; Burkhardt, Irmela; Enz, Josephin; Riekehr, Stefan

    2017-05-10

    This work deals with the effects of laser beam power, focus position and advance speed on the geometry, microstructure and mechanical properties such as the tensile strength and microhardness of autogenously fibre laser beam welded Ti-6Al-2Sn-4Zr-2Mo (denoted as Ti-6242) butt joints used for high temperature applications. The Ti-6242 sheet employed here is characterized by a globular (α+β) microstructure. Laser beam welded butt joints consisted of a martensitic fusion zone, inhomogeneous heat affected zones and equiaxed base materials. The microhardness increased from 330 HV 0.3 in base material to 430 HV 0.3 in fusion zone due to the martensitic transformation. Butt joints showed the base material level of strength in tensile test. The local increase in microhardness provided a shielding effect that protected the Ti-6242 butt joint against mechanical damage during the static tensile load test. The predicted critical total underfill depth that does not reduce the tensile strength of the weld was determined to be 25% of the specimen thickness. - Highlights: • Autogenous fibre LBW of Ti-6242 was successfully achieved. • Butt joints showed low levels of porosity and an appropriate seam geometry. • Base material level of strength achieved for tensile strength. • Predicted critical underfill depth is 25% of the specimen thickness.

  2. LEASE FINANCING: A NEW DUAL APPROACH

    Directory of Open Access Journals (Sweden)

    Cristina-Aurora, BUNEA-BONTAS

    2013-12-01

    Full Text Available Leasing is an important additional financing technique used by many companies, enabling them to use property, plant and equipment without making large initial cash outlays. It also provides flexibility, allowing entities to address obsolescence risks. Under current accounting rules, when referring to the operating leasing in particular, there is a lack of comparability between the financial position and operating results of companies that buy assets and the financial position and operating results of those that lease similar assets. This has led critics to assert that the current accounting does not portray the economics of lease arrangements. In response to this criticism, the IASB and FASB have developed a new approach to lease accounting that would require a lessee to recognise assets and liabilities for the rights and obligations created by leases, this providing greater transparency and comparability for financial statements users. On the other hand, the proposals will affect almost every company and the impact of the proposed changes may be significant, as recognising additional assets and liabilities and finance expense will affect key performance ratios and, consequently, the ability to satisfy debt covenants.

  3. A framework for determining optimal petroleum leasing

    International Nuclear Information System (INIS)

    Robinson, D.R.

    1991-01-01

    The techniques of auction theory and option theory are combined to allow valuation under both geologic and oil price uncertainty. The primary motivation for developing this framework is to understand the prevalence of leasing in transferring ownership of oil properties. Under a standard oil lease, the landowner sells an oil company the right to explore and develop a tract of land for a fixed period of time. If oil is found, a fraction of the revenues is reserved for the landowner. Compared to the outright sale of the minerals, leasing has the disadvantages of: (1) lowering total oil field value through alteration of investment incentives; (2) providing the seller with a more risk cash flow; and (3) increasing legal and administrative costs. It is demonstrated here that in lease sales as compared to full mineral interest sales, the relative disadvantages are offset by more effective value transfer to the seller. For the base-case parameters, the optimal lease in a bonus auction gives the seller 28% more value than the sale of the full mineral interest. There is a loss in the leasing process from distortion of development timing incentives

  4. The ABCs of Technology Leasing: Get the Facts on the Pros and Cons of Leasing

    Science.gov (United States)

    Aldridge, Robb

    2005-01-01

    Ownership means control. What one buys is easier to manage with respect to upgrading or getting rid of equipment that is no longer adequate for the job. Purchasing can put severe demands on cash flow, however, so sometimes the budget drives the decision to lease. Not surprisingly, leasing reverses the advantages and disadvantages of ownership. For…

  5. 30 CFR 250.182 - When may the Secretary cancel a lease at the exploration stage?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When may the Secretary cancel a lease at the... Requirements, Lease Term Extensions, and Lease Cancellations § 250.182 When may the Secretary cancel a lease at... be modified to avoid the condition(s). The Secretary may cancel the lease if: (a) The primary lease...

  6. 25 CFR 162.229 - How long can the term of an agricultural lease run?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How long can the term of an agricultural lease run? 162... AND PERMITS Agricultural Leases Lease Requirements § 162.229 How long can the term of an agricultural lease run? (a) An agricultural lease must provide for a definite lease term, specifying the commencement...

  7. 26 CFR 1.514(f)-1 - Definition of business lease.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Definition of business lease. 1.514(f)-1 Section... § 1.514(f)-1 Definition of business lease. (a) In general. The term business lease means any lease... extension, the lease shall be considered a 3-year lease and hence does not meet the definition of a business...

  8. 26 CFR 1.280F-5T - Leased property (temporary).

    Science.gov (United States)

    2010-04-01

    ... incidental leasing activity is insufficient. For example, a person leasing only one passenger automobile during a taxable year is not regularly engaged in the business of leasing automobiles. In addition, an... listed property leased or held for leasing by any person regularly engaged in the business of leasing...

  9. Dormaier and Chester Butte 2007 Follow-up Habitat Evaluation Procedures Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul R.

    2008-01-01

    Follow-up habitat evaluation procedures (HEP) analyses were conducted on the Dormaier and Chester Butte wildlife mitigation sites in April 2007 to determine the number of additional habitat units to credit Bonneville Power Administration (BPA) for providing funds to enhance, and maintain the project sites as partial mitigation for habitat losses associated with construction of Grand Coulee Dam. The Dormaier follow-up HEP survey generated 482.92 habitat units (HU) or 1.51 HUs per acre for an increase of 34.92 HUs over baseline credits. Likewise, 2,949.06 HUs (1.45 HUs/acre) were generated from the Chester Butte follow-up HEP analysis for an increase of 1,511.29 habitat units above baseline survey results. Combined, BPA will be credited with an additional 1,546.21 follow-up habitat units from the Dormaier and Chester Butte parcels.

  10. Geology of Pine and Crater Buttes: two basaltic constructs on the far eastern Snake River Plain

    International Nuclear Information System (INIS)

    Mazierski, P.F.; King, J.S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets

  11. Optimization and Prediction of Angular Distortion and Weldment Characteristics of TIG Square Butt Joints

    Science.gov (United States)

    Narang, H. K.; Mahapatra, M. M.; Jha, P. K.; Biswas, P.

    2014-05-01

    Autogenous arc welds with minimum upper weld bead depression and lower weld bead bulging are desired as such welds do not require a second welding pass for filling up the upper bead depressions (UBDs) and characterized with minimum angular distortion. The present paper describes optimization and prediction of angular distortion and weldment characteristics such as upper weld bead depression and lower weld bead bulging of TIG-welded structural steel square butt joints. Full factorial design of experiment was utilized for selecting the combinations of welding process parameter to produce the square butts. A mathematical model was developed to establish the relationship between TIG welding process parameters and responses such as upper bead width, lower bead width, UBD, lower bead height (bulging), weld cross-sectional area, and angular distortions. The optimal welding condition to minimize UBD and lower bead bulging of the TIG butt joints was identified.

  12. 48 CFR 23.704 - Application to Government-owned or -leased facilities.

    Science.gov (United States)

    2010-10-01

    ... ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Application to Government... and Services 23.704 Application to Government-owned or -leased facilities. Executive Order 13101...

  13. 78 FR 21912 - Proposed Information Collection; Comment Request; Crab Rationalization (CR) Program: Annual Report

    Science.gov (United States)

    2013-04-12

    ... consolidation, absentee quota share (QS) ownership, and changes in crew compensation as some of the program's... financial impacts of high lease rates, the amount of any lease payments charged to crews could be limited or...

  14. 75 FR 60804 - Notice of Availability of the Final Environmental Impact Statement for the West Butte Wind Power...

    Science.gov (United States)

    2010-10-01

    ... Wind Power Right-of-Way, Crook and Deschutes Counties, OR AGENCY: Bureau of Land Management, Interior... Final Environmental Impact Statement (EIS) for the West Butte Wind Power Right-of-Way and by this Notice... Register notice. FOR FURTHER INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right of Way...

  15. 77 FR 61020 - Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2012-10-05

    ...; UTU-83067] Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte... (BLM) has prepared a Final Environmental Impact Statement (EIS) for the Sigurd to Red Butte No. 2--345...; Utah School and Institutional Trust Lands Administration; Millard, Sevier, Beaver, Iron, and Washington...

  16. 77 FR 10773 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of...

    Science.gov (United States)

    2012-02-23

    ... Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of Expedited Five-Year... orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be... certificate of service. Determination.--The Commission has determined to exercise its authority to extend the...

  17. 76 FR 67146 - Stainless Steel Butt-Weld Pipe Fittings From Italy; Extension of Time Limit for Preliminary...

    Science.gov (United States)

    2011-10-31

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-475-828] Stainless Steel Butt-Weld... antidumping duty order on stainless steel butt-weld pipe fittings from Italy in the Federal Register. See... preliminary results of this review within the original time frame because it needs to obtain additional...

  18. DEVELOPMENT FEATURES OF LEASING RELATIONS IN CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    Patimat A. Abdulkhalikova

    2017-01-01

    Full Text Available Abstract. Objectives Leasing, which is an alternative to traditional forms of investment for Russia, is currently among the most effective methods of financing construction organisations. Under conditions of shortage of available financial resources, leasing allows the modernisation of production to be carried out, modern equipment to be used or new production facilities to be opened in the shortest possible time. The purpose of the study is to comprehensively substantiate the specifics of leasing operations in construction and demonstrate its advantages as a tool for financing construction organisations. Methods The theoretical basis of the study was the fundamental provisions of economic, financial and management theory. During the process of research, logical, statistical and comparative analysis methods were used alongside expert evaluation and factor analysis approaches. Results For a leasing company whose purpose is to identify potential risk areas associated with the possibility of exceeding planned costs, it is recommended that a feasibility analysis be carried out prior to forming a loan portfolio. It is established that the transactions of a leasing company with a construction organisation can be presented as a separate investment project with a complex financial structure and a combination of interrelated long-term contracts. It is shown that the standardisation of principles of corporate governance and risk management is capable not only of reducing the susceptibility of a construction organisation to risk, but also of increasing the degree of trust on the part of customers and counterparties. Conclusion The expediency of using leasing in construction is due to the insufficient volume of private funds for the acquisition of equipment, which becomes particularly relevant against the background of rapidly aging facilities of construction organisations. Under conditions of largescale technical re-equipment, in which advanced

  19. A parametric study of residual stresses in multipass butt-welded stainless steel pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brickstad, B. [SAQ Inspection Ltd., Stockholm (Sweden); Josefson, L. [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Solid Mechanics

    1996-06-01

    Multipass circumferential butt-welding of stainless steel pipes is simulated numerically in a non-linear thermo-mechanical FE-analysis. In particular, the through-thickness variation at the weld and heat affected zone, of the axial and hoop stresses and their sensitivity to variation in weld parameters are studied. Recommendations are given for the through thickness variation of the axial and hoop stresses to be used when assessing the growth of surface flaws at circumferential butt welds in nuclear piping system. 31 refs, 12 tabs, 54 figs.

  20. Et cigaretskod, en donation, en renere by: A cigarette butt, a donation, a cleaner city

    OpenAIRE

    Bengtsen, Monica; Patursson, Guttormur; Nedergaard, Sofie Tarpø; Madsen, Maria Chas; Drews, Anna Ørsted; Bach, Katrine Møller

    2013-01-01

    This project concerns an explanation of the problem of cigarette butts lying in the streets of Copenhagen. By using elements of the theory of nudging we have designed an ashtray ment to pledge smokers not to throw their butt in the streets. The design is a response to a design competition published by the municipality of Copenhagen, as an attempt to be the cleanest capital in Europe by the year 2015. The core of the design presentation is in cooperation with private firms, who have obligated ...

  1. 25 CFR 211.51 - Surrender of leases.

    Science.gov (United States)

    2010-04-01

    ... received by the superintendent or area director; (g) If oil, gas, or geothermal resources are being drained from the leased premises by a well or wells located on lands not included in the lease, the Secretary...

  2. Cost/Benefit Analysis of Leasing Versus Purchasing Computers

    National Research Council Canada - National Science Library

    Arceneaux, Alan

    1997-01-01

    .... In constructing this model, several factors were considered, including: The purchase cost of computer equipment, annual lease payments, depreciation costs, the opportunity cost of purchasing, tax revenue implications and various leasing terms...

  3. Analysis and Prediction of the Billet Butt and Transverse Weld in the Continuous Extrusion Process of a Hollow Aluminum Profile

    Science.gov (United States)

    Lou, Shumei; Wang, Yongxiao; Liu, Chuanxi; Lu, Shuai; Liu, Sujun; Su, Chunjian

    2017-08-01

    In continuous extrusions of aluminum profiles, the thickness of the billet butt and the length of the discarded extrudate containing the transverse weld play key roles in reducing material loss and improving product quality. The formation and final distribution of the billet butt and transverse weld depend entirely on the flow behavior of the billet skin material. This study examined the flow behavior of the billet skin material as well as the formation and evolution of the billet butt and the transverse weld in detail through numerical simulation and a series of experiments. In practical extrusions, even if the billet skin is removed by lathe turning shortly before extrusion, billet skin impurities are still distributed around the transverse weld and in the billet butt. The thickness of the scrap billet butt and the length of the discarded extrudate containing the transverse weld can be exactly predicted via simulation.

  4. FINANCIAL REPORTING AND TAX IMPLICATIONS OF REAL ESTATE LEASE

    OpenAIRE

    Snežana Miletić; Savka Vučković Milutinović

    2013-01-01

    Leasing is a very popular way of acquiring fixed assets, but despite its importance and presence the users of financial statements are often not in a position to realistically consider reporting entity's lease transactions and their impact on entity's financial position and performance. For years, current financial reporting for leases has been subject to many critiques. The reason for this primary lies in the fact that it left a lot of opportunities for manipulation during the lease classifi...

  5. 76 FR 43341 - Notice of Availability of the Record of Decision for the West Butte Wind Power Right-of-Way...

    Science.gov (United States)

    2011-07-20

    ... LVRWH09H0600; HAG 10-0338] Notice of Availability of the Record of Decision for the West Butte Wind Power Right... INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right-of-Way Project Lead: telephone (541) 416... INFORMATION: The applicant, West Butte Wind Power, LLC, filed right-of-way (ROW) application OR-065784 to...

  6. 25 CFR 215.7 - Advertisement of sale of leases.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Advertisement of sale of leases. 215.7 Section 215.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.7 Advertisement of sale of leases. Upon authority being granted by...

  7. 24 CFR 982.603 - SRO: Lease and HAP contract.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false SRO: Lease and HAP contract. 982... Types Single Room Occupancy (sro) § 982.603 SRO: Lease and HAP contract. For SRO housing, there is a separate lease and HAP contract for each assisted person. ...

  8. 18 CFR 367.19 - Accounting for leases.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Accounting for leases. 367.19 Section 367.19 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Instructions § 367.19 Accounting for leases. (a) All leases must be classified as either capital or operating...

  9. 7 CFR 765.252 - Lease of security.

    Science.gov (United States)

    2010-01-01

    ... as security for FLP loans. (1) For loans secured by real estate before December 23, 1985, the Agency has a security interest in any mineral rights the borrower has on the real estate pledged as... Lease of security. (a) Real estate leases. The borrower may lease real estate security provided the...

  10. 77 FR 40630 - Notice of Competitive Coal Lease Sale, Colorado

    Science.gov (United States)

    2012-07-10

    ..., COC-74219] Notice of Competitive Coal Lease Sale, Colorado AGENCY: Bureau of Land Management, Interior... in the Wadge Seam described below in Routt County, Colorado, will be offered for competitive lease by sealed bid in accordance with the provisions of the Mineral Leasing Act of 1920, as amended. DATES: The...

  11. An Auction-Based Spectrum Leasing Mechanism for Mobile Macro-Femtocell Networks of IoT

    Directory of Open Access Journals (Sweden)

    Xin Chen

    2017-02-01

    Full Text Available The Internet of Things (IoT is a vision of the upcoming society. It can provide pervasive communication between two or more entities using 4G-LTE (Long Term Evolution communication technology. In 4G-LTE networks, there are two important problems: helping manage the spectrum demands of IoT devices and achieving much more revenue with the limited resource. This paper proposes a pricing framework to investigate the spectrum leasing in mobile heterogeneous networks with single macrocell and multiple femtocells. We modeled the leasing procedure between the macrocell service provider (MSP and femtocell holders (FHs as an auction to motivate the MSP to lease its spectrum resource. All FHs act as the bidders, and the monopolist MSP acts as the auctioneer. In the auction, FHs submit their bids to rent the spectrum resource so that they can make a profit by selling it to their subscribers. The MSP determines the spectrum leasing amount and chooses the winning FHs by solving the dynamic programming-based 0–1 knapsack problem. In our proposed framework, we focus on the spectrum pricing strategy and revenue maximization of the MSP. The simulation results show that the proposed scheme provides effective motivation for the MSP to lease the spectrum to FHs, and both the MSP and FHs can benefit from spectrum leasing.

  12. An Auction-Based Spectrum Leasing Mechanism for Mobile Macro-Femtocell Networks of IoT.

    Science.gov (United States)

    Chen, Xin; Xing, Lei; Qiu, Tie; Li, Zhuo

    2017-02-16

    The Internet of Things (IoT) is a vision of the upcoming society. It can provide pervasive communication between two or more entities using 4G-LTE (Long Term Evolution) communication technology. In 4G-LTE networks, there are two important problems: helping manage the spectrum demands of IoT devices and achieving much more revenue with the limited resource. This paper proposes a pricing framework to investigate the spectrum leasing in mobile heterogeneous networks with single macrocell and multiple femtocells. We modeled the leasing procedure between the macrocell service provider (MSP) and femtocell holders (FHs) as an auction to motivate the MSP to lease its spectrum resource. All FHs act as the bidders, and the monopolist MSP acts as the auctioneer. In the auction, FHs submit their bids to rent the spectrum resource so that they can make a profit by selling it to their subscribers. The MSP determines the spectrum leasing amount and chooses the winning FHs by solving the dynamic programming-based 0-1 knapsack problem. In our proposed framework, we focus on the spectrum pricing strategy and revenue maximization of the MSP. The simulation results show that the proposed scheme provides effective motivation for the MSP to lease the spectrum to FHs, and both the MSP and FHs can benefit from spectrum leasing.

  13. The coal deposits of the Alkali Butte, the Big Sand Draw, and the Beaver Creek fields, Fremont County, Wyoming

    Science.gov (United States)

    Thompson, Raymond M.; White, Vincent L.

    1952-01-01

    Large coal reserves are present in three areas located between 12 and 20 miles southeast of Riverton, Fremont County, central Wyoming. Coal in two of these areas, the Alkali Butte coal field and the Big Sand Draw coal field, is exposed on the surface and has been developed to some extent by underground mining. The Beaver Creek coal field is known only from drill cuttings and cores from wells drilled for oil and gas in the Beaver Creek oil and gas field.These three coal areas can be reached most readily from Riverton, Wyo. State Route 320 crosses Wind River about 1 mile south of Riverton. A few hundred yards south of the river a graveled road branches off the highway and extends south across the Popo Agie River toward Sand Draw oil and gas field. About 8 miles south of the highway along the Sand Draw road, a dirt road bears east and along this road it is about 12 miles to the Bell coal mine in the Alkali Butte coal field. Three miles southeast of the Alkali Butte turn-off, 3 miles of oiled road extends southwest into the Beaver Creek oil and gas field. About 6 miles southeast of the Beaver Creek turn-off, in the valley of Little Sand Draw Creek, a dirt road extends east 1. mile and then southeast 1 mile to the Downey mine in the Big Sand Draw coal field. Location of these coal fields is shown on figure 1 with their relationship to the Wind River basin and other coal fields, place localities, and wells mentioned in this report. The coal in the Alkali Butte coal field is exposed partly on the Wind River Indian Reservation in Tps. 1 and 2 S., R. 6 E., and partly on public land. Coal in the Beaver Creek and Big Sand Draw coal fields is mainly on public land. The region has a semiarid climate with rainfall averaging less than 10 in. per year. When rain does fall the sandy-bottomed stream channels fill rapidly and are frequently impassable for a few hours. Beaver Creek, Big Sand Draw, Little Sand Draw, and Kirby Draw and their smaller tributaries drain the area and flow

  14. Innovative leasing engineering as tool for synchronization of innovative, leasing and buying cycles

    Science.gov (United States)

    Yaskova, Natalia; Alekseeva, Tatyana

    2017-10-01

    This article suggests a new principle of cyclic synchronization of innovative, leasing and buying cycles in construction “innovative leasing engineering” which facilitates the accelerated transition of the national economy to the innovative way of development. Cyclical nature of economic phenomena is not only their immanent property, but also the subject of economic analysis. Modern format of decision making management requires analysis of the many cycles which fill any kind of activity. Accounting and reconciliation of construction, design, investment, buying, reproduction, leasing and other cycles is important for investment and construction sphere from the point of view of necessity for synchronization and position of determining the nature of trends in sectoral development.

  15. Modeling and control of a DC upset resistance butt welding process

    NARCIS (Netherlands)

    Naus, G.J.L.; Meulenberg, R.; Molengraft, van de M.J.G.

    2007-01-01

    This paper presents the analysis and synthesis of modeling and control of the DC upset resistance butt welding process used in rim production lines. A new control strategy is developed, enabling active control of the welding seam temperature and the upset size. As a result, set-up times and energy

  16. Gap Width Study and Fixture Design in Laser Butt-Welding

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    .5-2.0 m/min, the laser power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely......This paper discusses some practical consideration for design of a mechanical fixture, which enables to accurately measure the width of a gap between two stainless steel workpieces and to steadfastly clamp the workpieces for butt-welding with a high power CO2 laser.With such a fixture, a series...... of butt-welding experiment is successfully carried out in order to find the maximum allowable gap width in laser butt-welding. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0...

  17. TIG-dressing of High Strength Butt Welded Connection. Part 2 : Physical Testing and Modelling

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  18. TIG-dressing of high strength butt welded connection - Part 2: physical testing and modelling

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  19. Characterizing butt-rot fungi on USA-affiliated islands in the western Pacific

    Science.gov (United States)

    Phil Cannon; Ned B. Klopfenstein; Robert L. Schlub; Mee-Sook Kim; Yuko Ota; Norio Sahashi; Roland J. Quitugua; John W. Hanna; Amy L. Ross-Davis; J. D. Sweeney

    2014-01-01

    Ganoderma and Phellinus are genera that commonly cause tree butt-rot on USA-affiliated islands of the western Pacific. These fungal genera can be quite prevalent, especially in older mangrove stands. Although the majority of infections caused by these fungi lead to severe rotting of the heartwood, they typically do not directly kill the living tissues of the sapwood,...

  20. Ultrasonic wave propagation in real-life austenitic V-butt welds: Numerical modeling and validation

    International Nuclear Information System (INIS)

    Hannemann, R.; Marklein, R.; Langenberg, K. J.; Schurig, C.; Koehler, B.; Walte, F.

    2000-01-01

    In nondestructive testing the evaluation of austenitic steel welds with ultrasound is a commonly used method. But, since the wave propagation, scattering, and diffraction effects in such complicated media are hardly understood, computer simulations are very helpful to increase the knowledge of the physical phenomena in such samples. A particularly powerful numerical time domain modeling tool is the well established Elastodynamic Finite Integration Technique (EFIT). Recently, EFIT has been extended to simulate elastic waves in inhomogeneous anisotropic media. In this paper, the step-by-step evaluation of ultrasonic wave propagation in inhomogeneous anisotropic media will be described and the results will be validated against measurements. As a simplified model, a V-butt weld with perpendicular grain structure is investigated. The coincidence between the B Scans of the simulation and the measurement of an idealized V-butt weld is remarkable and even effects predicted by theory and simulation - the appearance of two coupled quasi-SV waves - can be observed. As a next step, an improved and more realistic model of the grain orientation inside the V-butt weld is introduced. This model has been implemented in the EFIT code and has been validated against measurements. For this verification, measured and simulated B-Scans for a real-life V-butt weld have been compared and a significant coincidence has been observed. Furthermore, the main pulses in the B-Scans are interpreted by analyzing the snapshot-movies of the wavefronts

  1. 77 FR 13072 - Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental...

    Science.gov (United States)

    2012-03-05

    ... DEPARTMENT OF AGRICULTURE Forest Service Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental Impact Statement to the 2009 Salmon- Challis National Forest... of intent to prepare a supplemental environmental impact statement. SUMMARY: The Salmon-Challis...

  2. Geology of the Pumpkin Buttes Area of the Powder River Basin, Campbell and Johnson Counties, Wyoming

    Science.gov (United States)

    Sharp, William Neil; White, Amos McNairy

    1956-01-01

    About 200 uranium occurrences have been examined in the Pumpkin Buttes area, Wyoming. Uranium minerals are visible at most of these places and occur in red and buff sandstone lenses in the Wasatch formation of Eocene age. The uranium minerals are disseminated in buff sandstone near red sandstone, and also occur in red sandstone in manganese oxide concretions and uraninite concretions.

  3. A study of fatigue life distribution of butt-welded joints

    International Nuclear Information System (INIS)

    Sakai, Tatsuo; Fujitani, Keizo; Kikuchi, Toshiro; Tanaka, Takao.

    1981-01-01

    Various kinds of welded joints are being used in many structures such as ships, bridges and constructions. It is important in reliability analysis of such structures to clarify the statistical fatigue property of the welded joints. In this study, fatigue tests were carried out on the butt-welded joints of SM50A steel and a theoretical interpretation on the fatigue life distribution was attempted, assuming that a butt-welded joint is composed of a number of sliced specimens with different fatigue strengths. Main results obtained are summarized as follows; (1) The median crack initiation life of the butt-welded joint specimens coincided with that of the sliced specimens, when the crack initiation was defined by a 0.2 mm crack in the sliced specimens or the equivalent state of stress intensity factor in the joint specimens. (2) The distribution of crack initiation lives of the butt-welded joints can be theoretically derived by combining the concept of extreme distribution and the distribution model on the number of fatigue cracks. The theoretical distribution of crack initiation lives of the joints is in good agreement with the general trend of the experimental results. (3) If the distribution of crack initiation lives and the crack growth law are given experimentally, one can obtain analytically the distribution of final fatigue lives. The fatigue life distribution of the sliced specimens can be explained by the theory established in this study. (author)

  4. Teacher's Guide to Architectural Styles. Skinner's Butte Historical District. Revised Edition.

    Science.gov (United States)

    Bauer, Mary; Neimand, Hahn

    This document is a teacher's guide to the historic buildings of Eugene, Oregon. Eighteen buildings in the Skinner's Butte Historical District are highlighted, including the U.S. Post Office, the Eagles Building, the Lane Hotel, the Oregon Electric Depot, the Southern Pacific Railroad Depot, and several houses. For each structure there is a brief…

  5. 78 FR 76643 - Atlantic Wind Lease Sale 3 (ATLW3) Commercial Leasing for Wind Power on the Outer Continental...

    Science.gov (United States)

    2013-12-18

    ...; MMAA104000] Atlantic Wind Lease Sale 3 (ATLW3) Commercial Leasing for Wind Power on the Outer Continental.... ACTION: Proposed Sale Notice for Commercial Leasing for Wind Power on the Outer Continental Shelf Offshore Maryland. SUMMARY: This document is the Proposed Sale Notice (PSN) for the sale of commercial wind...

  6. Leasing: una alternativa de financiamiento para PYMES

    OpenAIRE

    Bedjan, María Belén

    2008-01-01

    En la actualidad las pequeñas y medianas empresas encuentran dificultades para acceder a las líneas tradicionales de créditos bancarios. Por otro lado las empresas necesitan actualizarse constantemente para poder ser competitivas en el mercado. Es aquí donde el leasing nace como una alternativa de financiación para las PyMEs. Este trabajo pretendió demostrar la conveniencia financiera del leasing con respecto a los préstamos bancarios para la compra de maquinarias agrícolas ...

  7. LEASE AS INSTITUTE OF OBLIGATORY AND REAL RIGHTS

    Directory of Open Access Journals (Sweden)

    Damir Kontrec

    2016-01-01

    Full Text Available The lease contract often occurs in practice and is one of the contract on the temporary transfer and use of things and goods. General regulation of the lease agreement stipulates by Obligations Act, on the other hand there are a number of special regulations governing contracts for the lease of specific types of things (agricultural land, office, ship. The article specifically points to the case law dealing with the institution of lease, especially talking about the lease as an institute real (land rights.

  8. Cigarettes Butts and the Case for an Environmental Policy on Hazardous Cigarette Waste

    Directory of Open Access Journals (Sweden)

    Richard Barnes

    2009-05-01

    Full Text Available Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell ‘safe’ cigarettes. They are perceived by much of the public (especially current smokers to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  9. Cigarettes butts and the case for an environmental policy on hazardous cigarette waste.

    Science.gov (United States)

    Novotny, Thomas E; Lum, Kristen; Smith, Elizabeth; Wang, Vivian; Barnes, Richard

    2009-05-01

    Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell 'safe' cigarettes. They are perceived by much of the public (especially current smokers) to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  10. RESIDUAL VALUE RISK IN AUTOMOTIVE OPERATING LEASE CONTRACTS

    Directory of Open Access Journals (Sweden)

    Ivan Tot

    2017-01-01

    Full Text Available The subject of the research in this paper are automotive operating lease contracts in the Croatian business practice. The provisions of the general terms and conditions for operating lease contracts of the Croatian leasing companies are being analysed, particulary those relating to the rights and obligations of the parties to the contract after the operating lease contract was terminated and the motor vehicle returned to the lessor. The existence of three contractual models of the automotive operating lease contract in the Croatian business practice is established, which vary with regard to the assignment and the distribution of the residual value risk. Those contractual models are being compared with the two most common contractual models of automotive lease contracts in the Austrian and German business practice: the lease contract with the excess mileage adjustment and the lease contract with the terminal rent adjustment. On the basis of the results of this comparison, applicability of the legal solutions, developed in the Austrian and German jurisprudence and legal literature regarding the lease contract with the excess mileage adjustment and the lease contract with the terminal rent adjustment, to the automotive operating lease contract within the framework of Croatian law, is being examinded.

  11. International experience in the use of leasing relations in Ukraine

    Directory of Open Access Journals (Sweden)

    L.V. Mikhalchuk

    2015-09-01

    Full Text Available The article examines the market of leasing relations in the UK, Germany, France, the USA. Comparative analysis of development of leasing in foreign countries has been carried out in order to use international experience of leasing relations in Ukraine at the present stage of development of state economy. In spite of prevalence of leasing in developed countries, this kind of relationship is still uncommon in the economic environment of Ukraine because of its novelty and lack of experience. Relevance of leasing development in Ukraine, including the formation of leasing market, primarily is caused by a significant proportion of obsolete equipment and low efficiency of its use. One of solutions to these problems can be leasing which brings together all the elements of international trade, credit, and investment operations.

  12. Advantage from Funding Durable Centers Leasing

    Directory of Open Access Journals (Sweden)

    Alina Zając

    2009-09-01

    Full Text Available In present market conditions huge number of businessmen has problems from gain over from banks capital on purchase of durable centers not only, but also on develop - ment and operating activity Individual can use with different forms funding investment, it which is between different leasing.

  13. Financier-led asset lease model

    NARCIS (Netherlands)

    Zhao, X.; Angelov, S.A.; Grefen, P.W.P.J.; Meersman, R.A.; Dillon, T.S.

    2010-01-01

    Nowadays, the business globalisation trend drives organisations to spread their business worldwide, which in turn generates vast asset demands. In this context, broader asset channels and higher financial capacities are required to boost the asset lease sector to meet the increasing asset demands

  14. Why your lease is an important asset.

    Science.gov (United States)

    Wood, Jason P; Wood, Patrick J

    2008-07-01

    The authors represent more than 3,500 dentists in California and have utilized their experience, knowledge and actual client examples to provide a thorough guide to protecting your future income and sale of your dental practice. This article is intended to provide an in-depth prospective of the value of the lease for your dental practice.

  15. 76 FR 78500 - Consumer Leasing (Regulation M)

    Science.gov (United States)

    2011-12-19

    ... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1013 [Docket No. CFPB-2011-0026] RIN 3170-AA06 Consumer Leasing (Regulation M) AGENCY: Bureau of Consumer Financial Protection. ACTION: Interim final rule... Protection Act (Dodd-Frank Act) transferred rulemaking authority for a number of consumer financial...

  16. Dutchwoman Butte revisited: Examining paradigms for livestock grazing exclusion

    Science.gov (United States)

    Jim Sprinkle; Mick Holder; Chas Erickson; Al Medina; Dan Robinett; George Ruyle; Jim Maynard; Sabrina Tuttle; John Hays; Walt Meyer; Scott Stratton; Alix Rogstad; Kevin Eldredge; Joe Harris; Larry Howery; Wesley Sprinkle

    2007-01-01

    In 2000, a collaborative range-monitoring program, "Reading the Range," was established with the University of Arizona Cooperative Extension in Gila County, the Gila County Cattle Growers, and the Tonto National Forest with the assistance of the US Department of Agriculture Renewable Resources Extension Act grant program. Funding for Reading the Range has...

  17. Development of radiographic technique for examining k-type butt weld

    International Nuclear Information System (INIS)

    Barui, K.L.; Bhattacharyya, B.

    1983-01-01

    An attempt is made to develop a radiographic technique for examining K-type full penetration butt joints in heavy duty crane girders. The existing standard techniques of radiographic examination is found to be unsuitable to assess the internal defects properly. The examination technique reported here is successful in detecting not only the nature of the internal defects but also their degree of severities - from which clues for avoiding the most probable defects can be found out. The results of radiographic examination applied on the K-type butt joints of heavy duty crane girders have been discussed and it is specified that the acceptable limit of the defects must lie between 'blue' and 'green' according to the IIW colour code. Much work is yet to be done before standard specifications regarding the acceptibility of the defects in the actual job can be formulated. (author)

  18. A new method to butt weld pipes with laser at different angles

    International Nuclear Information System (INIS)

    Gualini, M.M.S.

    1999-01-01

    Laser butt welding of pipes at different angles may be cumbersome and may require very expensive tooling. The pipe size may not allow using the laser for large volume throughputs. We propose a rotary optical head composed by an adjustable focus lens system and two reflecting mirrors. The laser beam is bent at 90 deg. C. so that weld can be performed inwards outwards. The optic head design compensates the rotary backlash and vibrations, like a penta prism thus ensuring a perfect follow up of the weld track. The optic head can be inclined at 45 deg. C. to laser butt weld pipe each other at 90 deg. C. In this case the laser beam focus position is computer controlled in order to keep the focus point always on the elliptical weld profile. The paper covers theoretical and practical aspects of the proposed device. (author)

  19. Wrought stainless steel butt-welding fittings: including reference to other corrosion resistant materials - approved 1971

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    ANSI B16.9 is the American Standard for steel butt-welding fittings and although not so stated, it is implied that its scope deals primarily with the schedules of wall thicknesses which are common to carbon steel and the grades of alloy steel piping that are selected for pressure and temperature considerations. The purpose of this standard is to provide industry with a set of dimensional standards for butt-welding fittings that can be used with these light wall pipes of corrosion resisting materials. The center-to-end dimensions of all fittings are identical with those in ANSI B16.9 which give to industry the advantage of uniform design room practice and a maximum utilization of existing die equipment. The only departure from this is in the lap-joint stub end where for purposes of economy the face-to-end of the product has been reduced for use with thin wall piping

  20. Technical Letter Report - Preliminary Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion

    International Nuclear Information System (INIS)

    Crawford, Susan L.; Cumblidge, Stephen E.; Doctor, Steven R.; Hall, Thomas E.; Anderson, Michael T.

    2008-01-01

    The U.S. Nuclear Regulatory Commission (NRC) has a multi-year program at the Pacific Northwest National Laboratory (PNNL) to provide engineering studies and assessments of issues related to the use of nondestructive evaluation (NDE) methods for the reliable inspection of nuclear power plant components. As part of this program, there is a subtask 2D that was set up to address an assessment of issues related to the NDE of high density polyethylene (HDPE) butt fusion joints. This work is being driven by the nuclear industry wanting to employ HDPE materials in nuclear power plant systems. This being a new material for use in nuclear applications, there are a number of issues related to its use and potential problems that may evolve. The industry is pursuing ASME Code Case N-755 entitled 'Use of Polyethylene (PE) Plastic Pipe for Section III, Division 1, Construction and Section XI Repair/Replacement Activities' that contains the requirements for nuclear power plant applications of HDPE. This Code Case requires that inspections be performed after the fusion joint is made by visually examining the bead that is formed and conducting a pressure test of the joint. These tests are only effective in general if gross through-wall flaws exist in the fusion joint. The NRC wants to know whether a volumetric inspection can be conducted on the fusion joint that will reliably detect lack-of-fusion conditions that may be produced during joint fusing. The NRC has requested that the work that PNNL is conducting be provided to assist them in resolving this inspection issue of whether effective volumetric NDE can be conducted to detect lack of fusion (LOF) in the butt HDPE joints. PNNL had 24 HDPE pipe specimens manufactured of 3408 material to contain LOF conditions that could be used to assess the effectiveness of NDE in detecting the LOF. Basic ultrasonic material properties were measured and used to guide the use of phased arrays and time-of-flight diffraction (TOFD) work that was

  1. Vision and spectroscopic sensing for joint tracing in narrow gap laser butt welding

    Science.gov (United States)

    Nilsen, Morgan; Sikström, Fredrik; Christiansson, Anna-Karin; Ancona, Antonio

    2017-11-01

    The automated laser beam butt welding process is sensitive to positioning the laser beam with respect to the joint because a small offset may result in detrimental lack of sidewall fusion. This problem is even more pronounced in case of narrow gap butt welding, where most of the commercial automatic joint tracing systems fail to detect the exact position and size of the gap. In this work, a dual vision and spectroscopic sensing approach is proposed to trace narrow gap butt joints during laser welding. The system consists of a camera with suitable illumination and matched optical filters and a fast miniature spectrometer. An image processing algorithm of the camera recordings has been developed in order to estimate the laser spot position relative to the joint position. The spectral emissions from the laser induced plasma plume have been acquired by the spectrometer, and based on the measurements of the intensities of selected lines of the spectrum, the electron temperature signal has been calculated and correlated to variations of process conditions. The individual performances of these two systems have been experimentally investigated and evaluated offline by data from several welding experiments, where artificial abrupt as well as gradual deviations of the laser beam out of the joint were produced. Results indicate that a combination of the information provided by the vision and spectroscopic systems is beneficial for development of a hybrid sensing system for joint tracing.

  2. A Vision-Aided 3D Path Teaching Method before Narrow Butt Joint Welding.

    Science.gov (United States)

    Zeng, Jinle; Chang, Baohua; Du, Dong; Peng, Guodong; Chang, Shuhe; Hong, Yuxiang; Wang, Li; Shan, Jiguo

    2017-05-11

    For better welding quality, accurate path teaching for actuators must be achieved before welding. Due to machining errors, assembly errors, deformations, etc., the actual groove position may be different from the predetermined path. Therefore, it is significant to recognize the actual groove position using machine vision methods and perform an accurate path teaching process. However, during the teaching process of a narrow butt joint, the existing machine vision methods may fail because of poor adaptability, low resolution, and lack of 3D information. This paper proposes a 3D path teaching method for narrow butt joint welding. This method obtains two kinds of visual information nearly at the same time, namely 2D pixel coordinates of the groove in uniform lighting condition and 3D point cloud data of the workpiece surface in cross-line laser lighting condition. The 3D position and pose between the welding torch and groove can be calculated after information fusion. The image resolution can reach 12.5 μm. Experiments are carried out at an actuator speed of 2300 mm/min and groove width of less than 0.1 mm. The results show that this method is suitable for groove recognition before narrow butt joint welding and can be applied in path teaching fields of 3D complex components.

  3. Summary of investigations of uranium deposits in the Pumpkin Buttes area, Johnson and Campbell Counties, Wyoming

    Science.gov (United States)

    Troyer, Max L.; McKay, Edward J.; Soister, Paul E.; Wallace, Stewart R.

    1954-01-01

    Uranium minerals were discovered in the Pumpkin Buttes area, Campbell and Johnson Counties, Wyo., by the U. S. Geological Survey in October 1951. From June to November 1952, an area of about 750 square miles was examined for uranium deposits, and 211 localities having abnormally high radioactivity were found; uranium minerals are visible at 121 of these localities. All known uranium mineralization in the area is restricted to sandstones of the Wasatch formation, except sparsely disseminated uranium in the sandstone of the White River formation, which caps the Pumpkin Buttes, mid several localities on the Great Pine Ridge southwest of the Pumpkin Buttes where iron-saturated sandstone and clinker in the Fort Union formation have above-normal radioactivity. The uranium occurrences in the Wasatch formation are in a red sandstone zone 450 to 900 feet above the base of the formation and are of two types: small concretionary masses of uranium, iron, manganese and vanadium minerals in sandstone, and irregular zones in which uranium minerals are disseminated in sandstone. The second type is usually larger but of lower grade than the first. Most of the localities at which uranium occurs are in a north-trending belt about 60 miles long and 18 miles in maximum width.

  4. A Demonstration System for Capturing Geothermal Energy from Mine Waters beneath Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    Blackketter, Donald [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-06-01

    Executive Summary An innovative 50-ton ground-source heat pump (GSHP) system was installed to provide space heating and cooling for a 56,000 square foot (5,200 square meter) building in Butte Montana, in conjunction with its heating and chiller systems. Butte is a location with winter conditions much colder than the national average. The GSHP uses flooded mine waters at 78F (25C) as the heat source and heat sink. The heat transfer performance and efficiency of the system were analyzed using data from January through July 2014. This analysis indicated that for typical winter conditions in Butte, Montana, the GSHP could deliver about 88% of the building’s annual heating needs. Compared with a baseline natural-gas/electric system, the system demonstrated at least 69% site energy savings, 38% source energy savings, 39% carbon dioxide emissions reduction, and a savings of $17,000 per year (40%) in utility costs. Assuming a $10,000 per ton cost for installing a production system, the payback period at natural gas costs of $9.63/MMBtu and electricity costs of $0.08/kWh would be in the range of 40 to 50 years. At higher utility prices, or lower installation costs, the payback period would obviously be reduced.

  5. Marketing Factors Affecting Leasing Selection in Bosnia and Herzegovina: Case Study on VB Leasing

    Directory of Open Access Journals (Sweden)

    Almir Ljeskovica

    2014-06-01

    Full Text Available In constantly changing environment all types of companies need some support from various types of funding institutions. Companies use their own resources to finance some projects or purchases but also take loans, mostly from banks to have additional support or in case of lack of money. Beside small, medium, as well as big companies, physical persons also use different types of financing to achieve their goals and fulfil their needs. Financing companies need to recognize the criteria on which prospective customers establish their financing selection decision. Planning a proper marketing strategy in order to attract new customers is of crucial importance in identifying these criteria. The main purpose of the study is to identify which factors affects people to choose leasing services. For data collection and analyse both, qualitative and quantitative study is conducted. Data for this study were collected through surveys delivered to 65 VB Leasing users from Sarajevo region. Out of 65, 57 useful responses were accepted for further analysis. Also interview was done with director of VB Leasing for qualitative study in order to get more insights in this topic. Findings of the study show what are the important factors for leasing selection and these information can support leasing managers in designing marketing strategies for perspective customers.

  6. Decision Tree Approach to Discovering Fraud in Leasing Agreements

    OpenAIRE

    Horvat Ivan; Pejić Bach Mirjana; Merkač Skok Marjana

    2014-01-01

    Background: Fraud attempts create large losses for financing subjects in modern economies. At the same time, leasing agreements have become more and more popular as a means of financing objects such as machinery and vehicles, but are more vulnerable to fraud attempts. Objectives: The goal of the paper is to estimate the usability of the data mining approach in discovering fraud in leasing agreements. Methods/Approach: Real-world data from one Croatian leasing firm was used for creating tow mo...

  7. An analysis of the buy-vs-lease decision.

    Science.gov (United States)

    Berlin, Jonathan W; Lexa, Frank J

    2006-02-01

    This article presents a financial model to analyze the buy-vs-lease decision. The model is constructed from the perspective of a lessee with an operating lease and uses the concept of net present value, which calculates the current value of predicted cash flows in the future. Predicted cash flows of an operating lease compared with buying are presented in the model, as is the after-tax borrowing rate, the appropriate discount rate used in a model of this type. The article also discusses nonfinancial factors that may influence the buy-vs-lease decision, including the need for flexibility in working capital and the anticipated technological obsolescence of equipment.

  8. EVALUAREA CONTRACTELOR DE LEASING LA NIVELUL ÎNTREPRINDERII

    Directory of Open Access Journals (Sweden)

    Mihaela Diaconu

    2011-01-01

    Full Text Available This paper outlines a framework for lease vs buy analysis. It also hightlines various aspectsof the lease/buy decision. The decision to lease or buy needs a comparison of alternativefinancing arrangements for the use of an asset. We provide a format for comparing netpresent value of the options, taking into account the analzsis of lease and buy using loans.Net present value is a more simple criterion to use in practice than dicounting costs, directlyreflecting the increasing value of the company as a result of its decision.

  9. Thermo-mechanical FE-analysis of butt-welding of a Cu-Fe canister for spent nuclear fuel

    International Nuclear Information System (INIS)

    Josefson, B.L.; Karlsson, L.; Lindgren, L.E.; Jonsson, M.

    1992-10-01

    In the Swedish nuclear waste program it has been proposed that spent nuclear fuel shall be placed in composite copper-steel canisters. These canisters will be placed in holes in tunnels located some 500 m underground in a rock storage. The canisters consists of two cylinders of 4850 mm length, one inner cylinder made of steel and one outer cylinder made of copper. The outer diameter of the canister is 880 mm and the wall thickness for each cylinder is 50 mm. At the storage, the steel cylinder, which contains the spent nuclear fuel, is placed inside the copper cylinder. Thereafter, a copper end is butt welded to the copper cylinder using electron beam welding. To obtain penetration through the thickness with this weld method a backing ring is placed at the inside of the copper cylinder. In the present paper, the temperature, strain and stress fields present during welding and after cooling after welding are calculated numerically using the FE-code NIKE-2D. The aim is to use the results of the present calculations to estimate the risk for creep fracture during the subsequent design life. A large strain formulation is employed for the calculation of transient and residual stresses in the canister based on the calculated history of the temperature field present in the canister during the welding process. The contact algorithm available in NIKE-2D is used to detect possible contact between the steel and copper cylinders during the welding. To simplify the numerical calculations and reduce the computational time, rotational symmetry is assumed. For large gap distances between the steel and copper cylinders the residual stress field is calculated to have a shape similar to that observed in butt welded pipes with maximum axial stress values at the yield stress level. For small gap distances the backing ring will come in contact with the steel cylinder which leads to large residual stresses in the backing ring. The maximum accumulated plastic strain in the weld metal and

  10. 78 FR 59968 - Potential Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore Oregon...

    Science.gov (United States)

    2013-09-30

    ... technical and financial qualifications can be found at: http://www.boem.gov/Renewable-Energy-Program... submissions of indications of interest in obtaining a commercial lease for wind energy development on the OCS... area described in this notice, the potential environmental consequences of wind energy development in...

  11. 78 FR 760 - Potential Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore New...

    Science.gov (United States)

    2013-01-04

    ... technical and financial qualifications can be found at: http://www.boem.gov/Renewable-Energy-Program... lease for wind energy development on the OCS offshore New York for the area identified in this notice... project to supply the Long Island and New York City region with renewable energy, consistent with New York...

  12. Theory of Financial Lease Contracts - Why all capital goods are not leased

    OpenAIRE

    Penttinen, Jussi

    2013-01-01

    The economic theory states that the capital structure of a firm is irrelevant in a perfect frictionless world. Hence when the assumptions of the Modigliani–Miller theorem and the CAPM hold, the question about the optimal source of funding of capital investments is also irrelevant. In practice though, capital leasing is widely used and the decision to lease or own assets is hardly a matter of indifference to firms or individuals. The motivation of this thesis is to identify when and why leasin...

  13. A New Lease on Learning.

    Science.gov (United States)

    Anderson, Lorin W.; Pellicer, Leonard O.

    1993-01-01

    South Carolina has found that meaningful improvement in Chapter 1 schools requires taking six crucial steps: (1) set meaningful goals; (2) pay attention to school culture; (3) revamp the curriculum; (4) pick up the pace; (5) integrate learning objectives with the regular program; and (6) change teaching tactics. An insert summarizes changes…

  14. Financial Leasing: Problems and Prospects of Development in Ukraine

    Directory of Open Access Journals (Sweden)

    Ganna Gridina

    2017-09-01

    Full Text Available The article highlights the current state of the financial services market, in particular financial leasing, which is a form of intensification of the investment process in Ukraine. The main problems of financial leasing development and prospects of its development in Ukraine are revealed. The shortcomings and advantages of financial leasing and its characteristics are determined. The article assesses the state of the Ukrainian market of leasing services and identifies the main problems of its functioning. An estimation of the development of the number of leasing companies in Ukraine is made. It is established that the number of legal entities - lessors remains almost unchanged, but financial companies that provide financial leasing services are rapidly developing. It is substantiated that financial companies providing financial leasing services as universal institutions provide a wider range of financial services in crisis conditions; it serves as the basis for the growth of their number. In these circumstances, these financial institutions can take over the functions of banks and develop at the expense of a larger portfolio of financial services than in highly specialized institutions. Distribution of concluded financial leasing agreements is characterized by the fact that transport, agriculture and construction were the most significant decrease. The services sector, machine building and metallurgy were almost not influenced of the destructive processes. Extractive industry, in contrast to the rest of the industries, has increased the volumes of financial leasing contracts. In the course of the study, the hypothesis of the substitutability of bank lending by leasing was confirmed, which is confirmed by the growing number of financial companies providing financial leasing services while simultaneously reducing the number of banks.

  15. Options and Consequences: Water Banking/Leasing Issues Explored for the Rio Grande in Southern New Mexico

    Science.gov (United States)

    Brookshire, D. S.; Coursey, D.; Dimint, A.; Tidwell, V.

    2004-12-01

    Since 1950, the demand for water has more than doubled in the United States. Historically, growing demands have been met by increasing reservoir capacity and through groundwater mining, often at the expense of environmental and cultural concerns. The future is expected to hold much the same. Demand for water will continue to increase particularly in response to the expanding urban sector, while growing concerns over the environment are prompting interest in allocating more water for in-stream uses. So, where will this water come from? Virtually all water supplies are allocated. Providing for new uses requires a reduction in the amount of water dedicated to existing uses. The water banking/leasing model is formulated within a system dynamics context using the object oriented commercial software package, Powersimä Studio 2003. System dynamics provides a unique mathematical framework for integrating the natural and social processes important to managing natural resources and can provide an interactive interface for engaging the public in the decision process. These system level models focus on capturing the broad structure of the system, specifically the feedback and time delays between interacting subsystems. The spatially aggregated models are computationally efficient allowing simulations to be conducted on a PC in a matter of seconds to minutes. By employing interactive interfaces, these models can be taken directly to the public or decision maker. To demonstrate the water banking/leasing model, application has been made to potential markets on the Rio Grande. Specifically, the model spans the reach between Elephant Butte Reservoir (central New Mexico) and the New Mexico/Texas state line. Primary sectors in the model include climate, surface and groundwater, riparian and aquatic habitat, watershed processes, water quality, water demand (residential, commercial, industrial, institution, and agricultural), economics, policy, and legal institutions. Within the model

  16. Hanford Federal Facility state of Washington leased land

    International Nuclear Information System (INIS)

    1993-11-01

    This report was prepared to provide information concerning past solid and hazardous waste management practices for all leased land at the US DOE Hanford Reservation. This report contains sections including land description; land usage; ground water, air and soil monitoring data; and land uses after 1963. Numerous appendices are included which provide documentation of lease agreements and amendments, environmental assessments, and site surveys

  17. 12 CFR 714.4 - What are the lease requirements?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false What are the lease requirements? 714.4 Section 714.4 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS... reasonably expect to recoup your entire investment in the leased property, plus the estimated cost of...

  18. Hanford Federal Facility state of Washington leased land

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    This report was prepared to provide information concerning past solid and hazardous waste management practices for all leased land at the US DOE Hanford Reservation. This report contains sections including land description; land usage; ground water, air and soil monitoring data; and land uses after 1963. Numerous appendices are included which provide documentation of lease agreements and amendments, environmental assessments, and site surveys.

  19. FINANCIAL ASPECTS OF ECOLOGICAL CLEAN LEASE IN CARPATHIAN MACROREGION

    Directory of Open Access Journals (Sweden)

    Taras Sus

    2016-06-01

    Full Text Available The features of the modern development of the agricultural land lease market in Ukraine are considered. The possible two scenarios of development of land relations in the context of the moratorium on land sales and financial crisis are proposed. The basic directions of development of land relations and the threat of sale of agricultural land bypass the moratorium by perpetual lease transaction are considered. Because of the difficult economic conditions in Ukraine, devaluation of the national currency and decreasing of real rent, increasing poverty among the rural population perpetual lease agreements will gain more and more popularity. This creates dangerous tendencies for legal land quasi market organization in terms of the moratorium and in modern realities it is gaining popularity among large agricultural holdings. The increasing popularity of perpetual lease promotes the factor that land owners are able to obtain a large sum of money immediately after contract conclusion, but not in parts during the lease term. Inducing factors of such a scenario of land relations development and the gaps in legal support of agricultural reform are considered. Financial problems of ecological clean land lease and the ways of their solution are outlined. Key words: ecological agricultural production, lease, perpetual lease, rent, land  relations. JEL: Q 14, R 58

  20. Chemical Leasing business models and corporate social responsibility.

    Science.gov (United States)

    Moser, Frank; Jakl, Thomas; Joas, Reihard; Dondi, Francesco

    2014-11-01

    Chemical Leasing is a service-oriented business model that shifts the focus from increasing sales volume of chemicals towards a value-added approach. Recent pilot projects have shown the economic benefits of introducing Chemical Leasing business models in a broad range of sectors. A decade after its introduction, the promotion of Chemical Leasing is still predominantly done by the public sector and international organizations. We show in this paper that awareness-raising activities to disseminate information on this innovative business model mainly focus on the economic benefits. We argue that selling Chemical Leasing business models solely on the grounds of economic and ecological considerations falls short of branding it as a corporate social responsibility initiative, which, for this paper, is defined as a stakeholder-oriented concept that extends beyond the organization's boundaries and is driven by an ethical understanding of the organization's responsibility for the impact of its business activities. For the analysis of Chemical Leasing business models, we introduce two case studies from the water purification and metal degreasing fields, focusing on employees and local communities as two specific stakeholder groups of the company introducing Chemical Leasing. The paper seeks to demonstrate that Chemical Leasing business models can be branded as a corporate social responsibility initiative by outlining the vast potential of Chemical Leasing to improve occupational health and safety and to strengthen the ability of companies to protect the environment from the adverse effects of the chemicals they apply.

  1. Aspects of royalty clauses inside freehold oil and gas leases

    International Nuclear Information System (INIS)

    Hughes, N.T.

    1998-01-01

    Some of the most common royalty clauses currently used are discussed with particular emphasis on the CAPL 88 and the CAPL 91 petroleum and natural gas lease forms and the provisions regarding lessors and lessees. The problems regarding their practical applications are described. The legal status of a royalty inside a freehold oil and gas lease is also examined. 4 refs

  2. Incorporation of cigarette butts into nests reduces nest ectoparasite load in urban birds: new ingredients for an old recipe?

    Science.gov (United States)

    Suárez-Rodríguez, Monserrat; López-Rull, Isabel; Garcia, Constantino Macías

    2013-02-23

    Birds are known to respond to nest-dwelling parasites by altering behaviours. Some bird species, for example, bring fresh plants to the nest, which contain volatile compounds that repel parasites. There is evidence that some birds living in cities incorporate cigarette butts into their nests, but the effect (if any) of this behaviour remains unclear. Butts from smoked cigarettes retain substantial amounts of nicotine and other compounds that may also act as arthropod repellents. We provide the first evidence that smoked cigarette butts may function as a parasite repellent in urban bird nests. The amount of cellulose acetate from butts in nests of two widely distributed urban birds was negatively associated with the number of nest-dwelling parasites. Moreover, when parasites were attracted to heat traps containing smoked or non-smoked cigarette butts, fewer parasites reached the former, presumably due to the presence of nicotine. Because urbanization changes the abundance and type of resources upon which birds depend, including nesting materials and plants involved in self-medication, our results are consistent with the view that urbanization imposes new challenges on birds that are dealt with using adaptations evolved elsewhere.

  3. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    International Nuclear Information System (INIS)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck; Myoung, Gi Hoon; Park, In Duck

    2016-01-01

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar

  4. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck [Korea Maritime and Ocean Univ., Busan (Korea, Republic of); Myoung, Gi Hoon; Park, In Duck [Korea Institute of Machinery and Materials, Busan (Korea, Republic of)

    2016-07-15

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar.

  5. Gas metal arc welding of butt joint with varying gap width based on neural networks

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2005-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters, has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  6. TEM analysis of a friction stir-welded butt joint of Al-Si-Mg alloys

    International Nuclear Information System (INIS)

    Cabibbo, M.; Meccia, E.; Evangelista, E.

    2003-01-01

    The microstructure evolution of a joint of Al-Si-Mg alloys A6056-T4 and A6056-T6 has been characterized by transmission electron microscopy (TEM). Metallurgical investigations, hardness and mechanical tests were also performed to correlate the TEM investigations to the mechanical properties of the produced friction stir-welded butt joint. After friction stir-welding thermal treatment has been carried out at 530 deg. C followed by ageing at 160 deg. C (T6). The base material (T4) and the heat-treated one (T6) were put in comparison showing a remarkable ductility reduction of the joint after T6 treatment

  7. Dealing with Operating Leases in Valuation

    OpenAIRE

    Aswath Damodaran

    1999-01-01

    Most firm valuation models start with the after-tax operating income as a measure of the operating income on a firm and reduce it by the reinvestment rate to arrive at the free cash flow to the firm. Implicitly, we assume that the operating expenses do not include any financing expenses (such as interest expense on debt). While this assumption, for the most part, is true, there is a significant exception. When a firm leases an asset, the accounting treatment of the expense depends upon whethe...

  8. 12 CFR 714.10 - What other laws must you comply with when engaged in leasing?

    Science.gov (United States)

    2010-01-01

    ..., or provide the member with greater protections or benefits than the Consumer Leasing Act. You are... leasing? You must comply with the Consumer Leasing Act, 15 U.S.C. 1667-67f, and its implementing regulation, Regulation M, 12 CFR part 213. You must comply with state laws on consumer leasing, but only to...

  9. 30 CFR 285.437 - When can my lease or grant be canceled?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When can my lease or grant be canceled? 285.437... Administration Lease Or Grant Cancellation § 285.437 When can my lease or grant be canceled? (a) The Secretary will cancel any lease or grant issued under this part upon proof that it was obtained by fraud or...

  10. 25 CFR 213.6 - Leases for minerals other than oil and gas.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Leases for minerals other than oil and gas. 213.6 Section 213.6 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF... Leases for minerals other than oil and gas. Uncontested mining leases for minerals other than oil and gas...

  11. 12 CFR 714.7 - What are the insurance requirements applicable to leasing?

    Science.gov (United States)

    2010-01-01

    ... to leasing? 714.7 Section 714.7 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS LEASING § 714.7 What are the insurance requirements applicable to leasing? (a) You must maintain a contingent liability insurance policy with an endorsement for leasing or be named as...

  12. 30 CFR 285.210 - How does MMS initiate the competitive leasing process?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How does MMS initiate the competitive leasing... OCS Renewable Energy Leases Competitive Lease Process § 285.210 How does MMS initiate the competitive leasing process? The MMS may publish in the Federal Register a public notice of Request for Interest to...

  13. 30 CFR 285.436 - Can MMS require lease or grant contraction?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Can MMS require lease or grant contraction? 285... Administration Lease Or Grant Contraction § 285.436 Can MMS require lease or grant contraction? At an interval no more frequent than every 5 years, the MMS may review your lease or grant area to determine whether the...

  14. 30 CFR 285.202 - What types of leases will MMS issue?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What types of leases will MMS issue? 285.202 Section 285.202 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE... Renewable Energy Leases General Lease Information § 285.202 What types of leases will MMS issue? The MMS may...

  15. 25 CFR 215.6 - Applications for leases; consent of Indian owners.

    Science.gov (United States)

    2010-04-01

    ... a new lease be executed and delivered (or advertised for sale to the highest bidder) unless the... be personally incompetent to transact ordinary business affairs, has agreed to the terms of said lease or the terms under which said lease is advertised for lease, except in cases where the land is...

  16. The geology of Pine and Crater Buttes: Two basaltic constructs on the far eastern Snake River Plain

    Science.gov (United States)

    Mazierski, Paul F.; King, John S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets.

  17. An Integrated Model for a Water Leasing System on the Middle Rio Grand, New Mexico

    Science.gov (United States)

    Brookshire, D. S.; Coursey, D. L.; Tidwell, V. C.; Broadbent, C. D.

    2006-12-01

    motivated by a utility function specific to each water users needs. Currently twelve experiments have been run in four different climatic scenarios (decreasing, increasing, normal and dry water scenarios) for the generalized water leasing system, and the sophisticated farmer decision process. The results have shown the market to be robust, with multiple trades occurring in each trading year. The trading process is efficient with positive gains being realized from participation in the marketplace. This material is based upon work supported in part by SAHRA (Sustainability of semi-Arid Hydrology and Riparian Areas) under the STC Program of the National Science Foundation, Agreement No. EAR-9876800 and through Sandia National Laboratory Research and Development Program. Special thanks go to Kyle Carpenter, Ramon Vasquez, Ann Demint, for programming of various software components and to Jake Grandy and Frannie Miller for help in running the experiments.

  18. Analytical model of stress field in submerged arc welding butt joint with thorough penetration

    Directory of Open Access Journals (Sweden)

    Winczek Jerzy

    2018-01-01

    Full Text Available Analytical model of temporary and residual stresses for butt welding with thorough penetration was described assuming planar section hypothesis and using integral equations of stress equilibrium of the bar and simple Hooke’s law. In solution the effect of phase transformations (structure changes and structural strains has been taken into account. Phase transformations during heating are limited by temperature values at the beginning and at the end of austenitic transformation, depending on chemical composition of steel while the progress of phase transformations during cooling is determined on the basis of TTT-welding diagram. Temperature values at the beginning and at the end of transformation are conditioned by the speed of heating. Kinetics of diffusional transformation is described basing on Johnson-Mehl-Avrami-Kolmogorov equation, while martensitic transformation, basing on Koistinen-Marburger equation. Stresses in elasto-plastic state are determined by iteration, using elastic solutions method with changeable longitudinal modulus of elasticity, conditioned by stress-strain curve. Computations of stress field have been conducted for one-side butt welded of two steel flats made from S235 steel. It has enabled a clear interpretation of influence of temperature field and phase transformation on stresses caused by welding using Submerged Arc Welding (SAW method.

  19. The microstructure of aluminum A5083 butt joint by friction stir welding

    International Nuclear Information System (INIS)

    Jasri, M. A. H. M.; Afendi, M.; Ismail, A.; Ishak, M.

    2015-01-01

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected

  20. A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding

    Directory of Open Access Journals (Sweden)

    Jinle Zeng

    2016-09-01

    Full Text Available During the complex path workpiece welding, it is important to keep the welding torch aligned with the groove center using a visual seam detection method, so that the deviation between the torch and the groove can be corrected automatically. However, when detecting the narrow butt of a specular reflection workpiece, the existing methods may fail because of the extremely small groove width and the poor imaging quality. This paper proposes a novel detection method to solve these issues. We design a uniform surface light source to get high signal-to-noise ratio images against the specular reflection effect, and a double-line laser light source is used to obtain the workpiece surface equation relative to the torch. Two light sources are switched on alternately and the camera is synchronized to capture images when each light is on; then the position and pose between the torch and the groove can be obtained nearly at the same time. Experimental results show that our method can detect the groove effectively and efficiently during the welding process. The image resolution is 12.5 μm and the processing time is less than 10 ms per frame. This indicates our method can be applied to real-time narrow butt detection during high-speed welding process.

  1. Primary water stress corrosion cracking resistance of alloy 690 heat affected zones of butt welds

    International Nuclear Information System (INIS)

    Fournier, L.; Calonne, O.; Toloczko, M.B.; Bruemmer, S.M.; Massoud, J.P.; Lemaire, E.; Gerard, R.; Somville, F.; Richnau, A.; Lagerstrom, J.

    2015-01-01

    A wide V-groove butt weld was fabricated from Alloy 690 plates using Alloy 152 filler material, maximum allowable heat input, and very stiff strong-backs. Alloy 690 heat affected zones (HAZ) was characterized in terms of microstructure and plastic strains induced by weld shrinkage. Crack initiation tests were carried out in pure hydrogenated steam at 400 C. degrees for 4000 h. Crack growth rate tests were performed in simulated PWR primary water at a temperature of 360 C. degrees. A maximum plastic strain around 5% was measured in the vicinity of the fusion line, which decreased almost linearly with the distance from the fusion line. Crack initiation tests on Alloy 690 HAZ specimens as well as on 30% cold-rolled Alloy 690 specimens were performed in pure hydrogenated steam at 400 C. degrees (partial pressure of hydrogen = 0.7 bar) for a total of 4000 h using cylindrical notched tensile specimens, reverse U-bends and flat micro-tensile specimens. No crack initiation was detected. Stress corrosion propagation rates revealed extremely low SCC (Stress Corrosion Cracking) growth rates both in the base metal and in the HAZ region whose magnitudes are of no engineering significance. Overall, the results indicated limited plastic strain induced by weld shrinkage in butt weld HAZ, and to no particular susceptibility of primary water stress corrosion cracking. (authors)

  2. The microstructure of aluminum A5083 butt joint by friction stir welding

    Energy Technology Data Exchange (ETDEWEB)

    Jasri, M. A. H. M.; Afendi, M. [School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh, 02600, Arau, Perlis (Malaysia); Ismail, A. [UniKL MIMET, JalanPantaiRemis, 32200, Lumut, Perak (Malaysia); Ishak, M. [Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 02600, Pekan, Pahang (Malaysia)

    2015-05-15

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected.

  3. Remedying breaches or non-performance of the lease

    International Nuclear Information System (INIS)

    Sali, L.M.

    1998-01-01

    This paper discusses how natural gas and petroleum leases should be handled in the event of a dispute or non-performance, particularly in cases when the original parties to the lease have assigned their interests to others, which is currently a common practice. The most obvious concern is premature termination or default which, however, can be easily prevented by paying all delay rentals in a timely fashion, and at the proper address. In other types of default, most leases in use today contain a default clause which requires the party that asserts the existence of a default to serve notice to the party allegedly in default. Remedying the default is permitted, as it is in many other contracts. Interruptions in production is a frequent occasion for claiming default and many leases deal with shut-in production in special ways, but care must be exercised in interpreting the lease in question, for if there is an intention by the lessee to shut-in production due to economic or other considerations after the primary term expires there is virtually no way to bring that lease back to life, unless the facts clearly show that the parties knowingly effectively constructed a new lease

  4. Chemical leasing in the context of sustainable chemistry.

    Science.gov (United States)

    Moser, Frank; Karavezyris, Vassilios; Blum, Christopher

    2015-05-01

    Chemical leasing is a new and innovative approach of selling chemicals. It aims at reducing the risks emanating from hazardous substances and ensuring long-term economic success within a global system of producing and using chemicals. This paper explores how, through chemical leasing, the consumption of chemicals, energy, resources and the generation of related wastes can be reduced. It also analyses the substitution of hazardous chemicals as a tool to protect environmental, health and safety and hence ensure compliance with sustainability criteria. For this, we are proposing an evaluation methodology that seeks to provide an answer to the following research questions: (1) Does the application of chemical leasing promote sustainability in comparison to an existing chemicals production and management system? 2. If various chemical leasing project types are envisaged, which is the most promising in terms of sustainability? The proposed methodology includes a number of basic goals and sub-goals to assess the sustainability for eight different chemical leasing case studies that have been implemented both at the local and the national levels. The assessment is limited to the relative assessment of specific case studies and allows the comparisons of different projects in terms of their relative contribution to sustainable chemistry. The findings of our assessment demonstrate that chemical leasing can be regarded as promoting sustainable chemistry in five case studies with certainty. However, on the grounds of our assessment, we cannot conclude with certainty that chemical leasing has equivalent contribution to sustainable chemistry in respect of three further case studies.

  5. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Lee, Young Ju; Oh, Young Jin

    2015-01-01

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions

  6. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Sung; Lee, Young Ju [Sunchon National University, Suncheon (Korea, Republic of); Oh, Young Jin [KEPCO E and C, Yongin (Korea, Republic of)

    2015-01-15

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

  7. Construction permit of nuclear power plants in case of leasing

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Guiding lines (unofficial): 1. A leasing company can be founded to finance and to operate a nuclear power plant. 2. The leasing company does not require a license according to section 7 of the Atomic Energy Act, for it neither constructs nor posesses the nuclear power plant. 3. This also applies if the proprietor, and later on operator, of the nuclear power plant holds an interest in this leasing company as a shareholder. Section 7, and 19 subsection 3 of the Atomic Energy Act. Higher Administrative Court of Rhineland Palatinate, Decision of July 20sup(th), 1982. (orig.) [de

  8. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne); Datation du site paleolithique moyen de la Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, M. [Ecole Nationale Superieure de Chimie, Lab. de Travaux Pratiques de Genie Chimique, 75 - Paris (France); Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L. [Lab. de Prehistoire du Museum National d' Histoire Naturelle, Institut de Paleontologie Humaine, UMR 6569 du CNRS, 75 - Paris (France); Rousseau, L. [Amiens Univ., Lab. de Sedimentologie et de Geochimie, 80 (France)

    2000-04-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  9. The Leasing Contract. Harmonizing National Legislation with the Lease Specific International Norms

    Directory of Open Access Journals (Sweden)

    Gheorghe Dinu

    2016-05-01

    Full Text Available By elaborating the proposed work, we want to bring theoretical contributions and enter a scientific domain which may not be at the beginning of its course to Romanian society, but which we consider to be able to handle improvements under doctrinaire and practical aspects. Objectively, we intend to reinforce the “statute” of leasing operations on a national level, operations which are still searching for their own identity, lacking any “legacy” gained from experience or historical post-December accumulations, and what has been gained has been assumed in a rush, under the influence of the Romanian society’s processes of democratization and European integration and are mechanical accumulations/teachings which resulted from the enforcement and necessity of complying with certain treaties and agreements which have not been sufficiently analyzed. Because they were taken in fractions, a series of norms resulted, lacking the consistency and sufficiency needed to improve education in the leasing domain, which has often led to contractual imbalances and a considerable decrease of the leasing market in Romania.

  10. 76 FR 21331 - Certain Carbon Steel Butt-Weld Pipe Fittings From Brazil, Japan, Taiwan, Thailand, and the People...

    Science.gov (United States)

    2011-04-15

    ... the People's Republic of China: Continuation of Antidumping Duty Orders AGENCY: Import Administration... butt-weld pipe fittings from Brazil, Japan, Taiwan, Thailand, and the People's Republic of China (PRC), pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year...

  11. Butt-joint integration of active optical components based on InP/AlInGaAsP alloys

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kuznetsova, Nadezda; Semenova, Elizaveta

    2014-01-01

    We demonstrate all-active planar high quality butt-joint (BJ) integration of a QW Semiconductor Optical Amplifier (SOA) and MQW Electro-Absorption Modulator (EAM) based on an InP/AlInGaAsP platform. The degradation of the optical properties in the vicinity of ~1 μm to the BJ interface was determi...

  12. TIG-dressing of High Strength Steel Butt Welded Connections. Part 1 : Weld Toe Geometry and Local Hardness

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  13. TIG-dressing of high strength steel butt welded connections - Part 1: weld toe geometry and local hardness

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  14. 77 FR 18266 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised...

    Science.gov (United States)

    2012-03-27

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised Schedule for the Subject Reviews AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date: March...

  15. 75 FR 430 - Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...

    Science.gov (United States)

    2010-01-05

    ...; UTU-83067] Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...) Cedar City Field Office, Cedar City, Utah, intends to prepare an Environmental Impact Statement (EIS... Fishlake National Forests), State of Utah, Millard County, Sevier County, Beaver County, Utah Division of...

  16. 76 FR 30962 - Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2011-05-27

    ...; UTU-83067] Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte..., as amended, the Bureau of Land Management (BLM) has prepared a Draft Environmental Impact Statement... Service; State of Utah; Millard, Sevier, Beaver, Iron, and Washington counties, Utah; and the cities of St...

  17. 76 FR 5205 - Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-01-28

    ...)] Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice of the scheduling of expedited reviews pursuant to..., Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury within a...

  18. 75 FR 60814 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2010-10-01

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice that it has instituted reviews pursuant to section... Thailand would be likely to lead to continuation or recurrence of material injury. Pursuant to section 751...

  19. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    International Nuclear Information System (INIS)

    Laurent, M.; Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L.; Rousseau, L.

    2000-01-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  20. 76 FR 19788 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-04-08

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand Determinations On... fittings from Brazil, China, Japan, Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. \\1...

  1. 30 CFR 282.15 - Cancellation of leases.

    Science.gov (United States)

    2010-07-01

    ... lease would probably cause serious harm or damage to life (including fish and other aquatic life), to... due to the failure of one or more partners to exercise due diligence, the innocent parties shall have...

  2. The application of chemical leasing business models in Mexico.

    Science.gov (United States)

    Schwager, Petra; Moser, Frank

    2006-03-01

    To better address the requirements of the changing multilateral order, the United Nations Industrial Development Organization (UNIDO) Cleaner Production Programme, in 2004, developed the new Sustainable Industrial Resource Management (SIRM) approach. This approach is in accordance with the principles decided at the United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro, Brazil in 1992. Unlike the traditional approaches to environmental management, the SIRM concept captures the idea of achieving sustainable industrial development through the implementation of circular material and energy flows in the entire production chain and reduction of the amount of material and energy used with greater efficiency solutions. The SIRM approach seeks to develop new models to encourage a shift from selling products to supplying services, modifying, in this manner, the supplier/user relationship and resulting in a win-win situation for the economy and the environment. Chemical Leasing represents such a new service-oriented business model and is currently being promoted by UNIDO's Cleaner Production Programme. MAIN FEATURES. One of the potential approaches to address the problems related to ineffective use and over-consumption of chemicals is the development and implementation of Chemical Leasing business models. These provide concrete solutions to the effective management of chemicals and on the ways negative releases to the environment can be reduced. The Chemical Leasing approach is a strategy that addresses the obligations of the changing international chemicals policy by focusing on a more service-oriented strategy. Mexico is one of the countries that were selected for the implementation of UNIDO's demonstration project to promote Chemical Leasing models in the country. The target sector of this project is the chemical industry, which is expected to shift their traditional business concept towards a more service and value-added approach. This is

  3. 29 CFR 779.306 - Leased departments not separate establishments.

    Science.gov (United States)

    2010-07-01

    ... STANDARDS ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES Exemptions for Certain Retail or Service... leased departments, controls the space location, determines the type of goods that may be sold...

  4. 30 CFR 256.8 - Leasing maps and diagrams.

    Science.gov (United States)

    2010-07-01

    ... OIL AND GAS IN THE OUTER CONTINENTAL SHELF Outer Continental Shelf Oil, Gas, and Sulphur Management... any lease is offered or issued an area may be (1) withdrawn from disposition pursuant to section 12(a...

  5. El leasing financiero internacional en el tratado UNIDROIT

    OpenAIRE

    Flores Doña, Mª Sierra

    1998-01-01

    El Tratado UNIDROIT se refiere al contrato de leasing financiero internacional, esto es, al celebrado entre una Sociedad de leasing y un empresario con establecimientos (principal o secundario) situados en el territorio de dos Estados contratantes y caracterizado porque la primera adquiere elementos integrantes del patrimonio empresarial a un fabricante, según las instrucciones recibidas por su cliente y a quien se le entregará para su uso a cambio del pago de cuotas períodicas, al margen de ...

  6. Dynamic interaction between markets for leasing and selling automobiles

    OpenAIRE

    Andrikopoulos, Athanasios; Markellos, Raphael N.

    2015-01-01

    We develop a model of dynamic interactions between price variations in leasing and selling markets for automobiles. Our framework assumes a differential game between multiple Bertrand-type competing firms which offer differentiated products to forward-looking agents. Empirical analysis of our model using monthly US data from 2002 to 2011 shows that variations in selling (cash) market prices lead rapidly dissipating changes of leasing market prices in the opposite direction. We discuss the pra...

  7. Episodic Holocene eruption of the Salton Buttes rhyolites, California, from paleomagnetic, U-Th, and Ar/Ar dating

    Science.gov (United States)

    Wright, Heather M.; Vazquez, Jorge A.; Champion, Duane E.; Calvert, Andrew T.; Mangan, Margaret T.; Stelten, Mark E.; Cooper, Kari M.; Herzig, Charles; Schriener Jr., Alexander

    2015-01-01

    In the Salton Trough, CA, five rhyolite domes form the Salton Buttes: Mullet Island, Obsidian Butte, Rock Hill, North and South Red Hill, from oldest to youngest. Results presented here include 40Ar/39Ar anorthoclase ages, 238U-230Th zircon crystallization ages, and comparison of remanent paleomagnetic directions with the secular variation curve, which indicate that all domes are Holocene. 238U-230Th zircon crystallization ages are more precise than but within uncertainty of 40Ar/39Ar anorthoclase ages, suggesting that zircon crystallization proceeded until shortly before eruption in all cases except one. Remanent paleomagnetic directions require three eruption periods: (1) Mullet Island, (2) Obsidian Butte, and (3) Rock Hill, North Red Hill, and South Red Hill. Borehole cuttings logs document up to two shallow tephra layers. North and South Red Hills likely erupted within 100 years of each other, with a combined 238U-230Th zircon isochron age of: 2.83 ± 0.60 ka (2 sigma); paleomagnetic evidence suggests this age predates eruption by hundreds of years (1800 cal BP). Rock Hill erupted closely in time to these eruptions. The Obsidian Butte 238U-230Th isochron age (2.86 ± 0.96 ka) is nearly identical to the combined Red Hill age, but its Virtual Geomagnetic Pole position suggests a slightly older age. The age of aphyric Mullet Island dome is the least well constrained: zircon crystals are resorbed and the paleomagnetic direction is most distinct; possible Mullet Island ages include ca. 2300, 5900, 6900, and 7700 cal BP. Our results constrain the duration of Salton Buttes volcanism to between ca. 5900 and 500 years.

  8. A novel butt-joint scheme for the preparation of electro-absorptive lasers

    International Nuclear Information System (INIS)

    Cheng Yuanbing; Pan Jiaoqing; Zhou Fan; Feng Wen; Wang Baojun; Zhu Hongliang; Zhao Lingjuan; Wang Wei

    2008-01-01

    A 1.55 μm InGaAsP/InGaAsP multiple-quantum-well electro-absorption modulator (EAM) monolithically integrated with a distributed feedback laser (DFB) diode has been realized based on a novel butt-joint scheme by ultra-low metal-organic vapour phase epitaxy for the first time. The threshold current of 25 mA and an extinction ratio of more than 30 dB are obtained by using the novel structure. The beam divergence angles at the horizontal and vertical directions are as small as 19.3 deg. x 13 deg., respectively, without a spot-size converter by undercutting the InGaAsP active region. The capacitance of the ridge waveguide device with a deep mesa buried by polyimide was reduced down to 0.30 pF

  9. Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding

    Science.gov (United States)

    Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo; Minutolo, Fabrizio Memola Capece; Squillace, Antonino

    2018-05-01

    Polycarbonate sheets, 3 mm thick, were successfully friction stir welded in butt joint configuration. Aiming to study the feasibility of the process and the influence of the process parameters joints under different processing conditions, obtained by varying the tool rotational speed and the tool travel speed, were realized. Tensile tests were carried out to characterize the joints. Moreover the forces arising during the process were recorded and carefully studied. The experimental outcomes proved the feasibility of the process when the process parameters are properly set, joints retaining more than 70% of the UTS of the base material were produced. The trend of the forces was described and explained, the influence of the process parameters was also introduced.

  10. Merging high resolution geophysical and geochemical surveys to reduce exploration risk at glass buttes, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Patrick [Ormat Nevada, Inc., Reno, NV (United States); Fercho, Steven [Ormat Nevada, Inc., Reno, NV (United States); Perkin, Doug [Ormat Nevada, Inc., Reno, NV (United States); Martini, Brigette [Corescan Inc., Ascot (Australia); Boshmann, Darrick [Oregon State Univ., Corvallis, OR (United States)

    2015-06-01

    The engineering and studies phase of the Glass Buttes project was aimed at reducing risk during the early stages of geothermal project development. The project’s inclusion of high resolution geophysical and geochemical surveys allowed Ormat to evaluate the value of these surveys both independently and in combination to quantify the most valuable course of action for exploration in an area where structure, permeability, and temperature are the most pressing questions. The sizes of the thermal anomalies at Glass Buttes are unusually large. Over the course of Phase I Ormat acquired high resolution LIDAR data to accurately map fault manifestations at the surface and collected detailed gravity and aeromagnetic surveys to map subsurface structural features. In addition, Ormat collected airborne hyperspectral data to assist with mapping the rock petrology and mineral alteration assemblages along Glass Buttes faults and magnetotelluric (MT) survey to try to better constrain the structures at depth. Direct and indirect identification of alteration assemblages reveal not only the geochemical character and temperature of the causative hydrothermal fluids but can also constrain areas of upflow along specific fault segments. All five datasets were merged along with subsurface lithologies and temperatures to predict the most likely locations for high permeability and hot fluids. The Glass Buttes temperature anomalies include 2 areas, totaling 60 km2 (23 mi2) of measured temperature gradients over 165° C/km (10° F/100ft). The Midnight Point temperature anomaly includes the Strat-1 well with 90°C (194 °F) at 603 m (1981 ft) with a 164 °C/km (10°F/100ft) temperature gradient at bottom hole and the GB-18 well with 71°C (160 °F) at 396 m (1300 ft) with a 182°C/km (11°F/100ft) gradient. The primary area of alteration and elevated temperature occurs near major fault intersections associated with Brothers Fault Zone and Basin and Range systems. Evidence for faulting is

  11. Residual stress in a thick section high strength T-butt weld

    International Nuclear Information System (INIS)

    Pearce, S.V.; Linton, V.M.; Oliver, E.C.

    2008-01-01

    Residual stresses in a structure are generated as a result of the various fabrication and welding processes used to make the component. Being able to quantify these residual stresses is a key step in determining the continuing integrity of a structure in service. In this work, the residual stresses around a high strength, quenched and tempered steel T-butt web to curved plate weld have been measured using neutron strain scanning. The results show that the residual stresses near the weld were dominated by the welding residual stresses, while the stresses further from the weld were dominated by the bending residual stresses. The results suggest that the combination of welding-induced residual stress and significant pre-welding residual stress, as in the case of a thick bent section of plate can significantly alter the residual stress profile from that in a flat plate

  12. A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

    Science.gov (United States)

    Ko, Dae-Eun

    2017-11-01

    A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

  13. Application of ultrasonic NDT technique for butt fusion joints of plastic pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Gyung; Lim, Hyung Taik; Choi, Jeong Guen; Lee, Jae Myung [ANSCO, Daejeon (Korea, Republic of)

    2016-05-15

    The long term-durability and the soundness of the plastic pipe have been sufficiently verified through use of the plastic pipe during the past several decades. Recently, as the pipe material have been constantly developed, the application of the plastic pipe is expanded to various industrial fields, such as an increase of a use pressure, the bigger diameter of the pipe, etc. In a nuclear power plant where a carbon steel pipe and a stainless steel pipe are mainly used as a safety class III buried pipe, safety in an operation is seriously threatened by abrasion, heat deterioration or the like, frequently generated in a metal pipe. Therefore, in order to provide an alternate to this problem there is a rising interest on using high-density polyethylene (HDPE) pipes which are known to provide much enhanced corrosion, abrasion and impact resistant properties. With polyethylene piping, one of the issue that is being looked into is the integrity of butt-fusion joint. At the present time the Referencing Code and Standard for the NDT technology of for butt fusion joint of the plastic pipe have not yet established. An optimum inspection parameters were determined according to the thickness of the HDPE pipe. It was also confirmed that most of the detection results of two techniques have matched with each other. In the PAUT, it is easy to distinguish signals with from the flaws made by the thin plate and the void. Also the resolving power of PAUT on the detection in the depth direction has been demonstrated to be satisfactory.

  14. Microstructure and mechanical properties of resistance upset butt welded 304 austenitic stainless steel joints

    International Nuclear Information System (INIS)

    Sharifitabar, M.; Halvaee, A.; Khorshahian, S.

    2011-01-01

    Graphical abstract: Three different microstructural zones formed at different distances from the joint interface in resistance upset butt welding of 304 austenitic stainless steel. Highlights: → Evaluation of microstructure in resistance upset welding of 304 stainless steel. → Evaluation of welding parameters effects on mechanical properties of the joint. → Introducing the optimum welding condition for joining stainless steel bars. -- Abstract: Resistance upset welding (UW) is a widely used process for joining metal parts. In this process, current, time and upset pressure are three parameters that affect the quality of welded products. In the present research, resistance upset butt welding of 304 austenitic stainless steel and effect of welding power and upset pressure on microstructure, tensile strength and fatigue life of the joint were investigated. Microstructure of welds were studied using scanning electron microscopy (SEM). X-ray diffraction (XRD) analysis was used to distinguish the phase(s) that formed at the joint interface and in heat affected zone (HAZ). Energy dispersive spectroscopy (EDS) linked to the SEM was used to determine chemical composition of phases formed at the joint interface. Fatigue tests were performed using a pull-push fatigue test machine and the fatigue properties were analyzed drawing stress-number of cycles to failure (S-N) curves. Also tensile strength tests were performed. Finally tensile and fatigue fracture surfaces were studied by SEM. Results showed that there were three different microstructural zones at different distances from the joint interface and delta ferrite phase has formed in these regions. There was no precipitation of chromium carbide at the joint interface and in the HAZ. Tensile and fatigue strengths of the joint decreased with welding power. Increasing of upset pressure has also considerable influence on tensile strength of the joint. Fractography of fractured samples showed that formation of hot spots at

  15. Telecommunications Circuit Allocation Programs - Kansas City Area

    National Research Council Canada - National Science Library

    Thomas, William

    1994-01-01

    The overall objective of the audit was to determine whether DoD circuit allocation programs identified and used the most effective configurations for leased long-haul, special-purpose telecommunications circuits...

  16. Central Gulf of Mexico lease sale draws weak industry response

    International Nuclear Information System (INIS)

    Koen, A.D.

    1992-01-01

    This paper reports that interest in oil and gas leases in the Gulf of Mexico continued spiraling downward at the latest Minerals Management Service offshore sale. Companies participating in Outer Continental Shelf Sale 139 last week in New Orleans offered 196 bids for 151 blocks in the central Gulf of Mexico. MMS offered 5,213 blocks for lease. The number of tracts receiving bids was the fewest at a central gulf lease sale since 114 tracts garnered high bids totaling $146.4 million at Sale 104 in April 1986. Apparent high bids in Sale 139 totaled $56,195,552, and all bids offered totaled just $65,300,864. Both bidding totals were the lowest in a Gulf of Mexico lease sale since MMS began area-wide gulf leasing at Sale 72 in May 1983. Only 64 of 93 qualified companies participated in Sale 139. Fifty-five companies offered apparent winning bids. By comparison, 123 companies at central gulf lease Sale 131 in March 1991 offered 637 bids totaling $320.5 million for 464 tracts. Apparent high bids last spring totaled $259.9 million. At central gulf lease Sale 123 in March 1990, high bids totaled $427.4 million for 538 tracts. In that sale, BP Exploration Inc. led all bidders, exposing $78 million in 79 high bids, including 60 for deepwater tracts. Since then, interest in deepwater tracts has waned in part because of sagging oil and gas prices as U.S. operators sought bigger prospects outside the U.S. Ironically, Sale 139 was dominated by the U.S. subsidiary of an Italian holding company

  17. 41 CFR 102-73.130 - When may Federal agencies consider acquiring leases with purchase options?

    Science.gov (United States)

    2010-07-01

    ... consider leasing with a purchase option at or below fair market value, consistent with the lease-purchase... and other advantages to the Government and is consistent with the Government's goals. (b) The...

  18. Analisis Yuridis Tentang Berlakunya Force Majeur Terhadap Wanprestasi Dalam Kontrak Leasing

    OpenAIRE

    Sidauruk, Masnur

    2011-01-01

    Dengan berkembangnya kegiatan ekonomi nasional, maka berkembang jugalah kegiatan masyarakat dalam bidang usaha ekonomi. Kegiatan usaha yang saat ini banyak berkembang di masyarakat adalah sewa guna usaha atau yang biasa disebut dengan leasing. Leasing adalah kegiatan pembiayaan dalam bentuk penyediaan barang modal baik secara Sewa Guna Usaha dengan hak opsi (Finance Lease) maupun Sewa Guna Usaha tanpa hak opsi (Operating Lease) untuk digunakan oleh Penyewa Guna Usaha (Lessee) selama jangka w...

  19. The Commercial Office Market and the Markup for Full Service Leases

    OpenAIRE

    Jonathan A. Wiley; Yu Liu; Dongshin Kim; Tom Springer

    2014-01-01

    Because landlords assume all of the operating expense risk, rents for gross leases exceed those for net leases. The markup, or spread, for gross leases varies between properties and across markets. Specifically, the markup is expected to increase with the cost of real estate services at the property, and to be influenced by market conditions. A matching procedure is applied to measure the services markup as the percentage difference between the actual rent on a gross lease relative to the act...

  20. Decision Tree Approach to Discovering Fraud in Leasing Agreements

    Directory of Open Access Journals (Sweden)

    Horvat Ivan

    2014-09-01

    Full Text Available Background: Fraud attempts create large losses for financing subjects in modern economies. At the same time, leasing agreements have become more and more popular as a means of financing objects such as machinery and vehicles, but are more vulnerable to fraud attempts. Objectives: The goal of the paper is to estimate the usability of the data mining approach in discovering fraud in leasing agreements. Methods/Approach: Real-world data from one Croatian leasing firm was used for creating tow models for fraud detection in leasing. The decision tree method was used for creating a classification model, and the CHAID algorithm was deployed. Results: The decision tree model has indicated that the object of the leasing agreement had the strongest impact on the probability of fraud. Conclusions: In order to enhance the probability of the developed model, it would be necessary to develop software that would enable automated, quick and transparent retrieval of data from the system, processing according to the rules and displaying the results in multiple categories.

  1. Effect of the weld groove shape and pass number on residual stresses in butt-welded pipes

    International Nuclear Information System (INIS)

    Sattari-Far, I.; Farahani, M.R.

    2009-01-01

    This study used finite element techniques to analyze the thermo-mechanical behaviour and residual stresses in butt-welded pipes. The residual stresses were also measured in some welds by using the Hole-Drilling method. The results of the finite element analysis were compared with experimentally measured data to evaluate the accuracy of the finite element modelling. Based on this study, a finite element modelling procedure with reasonable accuracy was developed. The developed FE modelling was used to study the effects of weld groove shape and weld pass number on welding residual stresses in butt-welded pipes. The hoop and axial residual stresses in pipe joints of 6 and 10 mm thickness of different groove shapes and pass number were studied. It is shown that these two parameters may have significant effects on magnitude and distribution of residual stresses in welded pipes.

  2. 13 CFR 120.871 - Leasing part of Project Property to another business.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Leasing part of Project Property....871 Leasing part of Project Property to another business. (a) The costs of interior finishing of space to be leased out to another business are not eligible Project costs. (b) Third-party loan proceeds...

  3. 30 CFR 285.408 - May I assign my lease or grant interest?

    Science.gov (United States)

    2010-07-01

    ... RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Lease and Grant... application to MMS. The assignment application must include: (1) The MMS-assigned lease or grant number; (2) A... required financial assurance. (c) If you submit an application to assign a lease or grant, you will...

  4. 24 CFR 982.616 - Shared housing: Lease and HAP contract.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Shared housing: Lease and HAP... Types Shared Housing § 982.616 Shared housing: Lease and HAP contract. For assistance in a shared housing unit, there is a separate HAP contract and lease for each assisted family. ...

  5. 24 CFR 982.607 - Congregate housing: Lease and HAP contract.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Congregate housing: Lease and HAP... Types Congregate Housing § 982.607 Congregate housing: Lease and HAP contract. For congregate housing, there is a separate lease and HAP contract for each assisted family. ...

  6. 24 CFR 982.611 - Group home: Lease and HAP contract.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Group home: Lease and HAP contract... Types Group Home § 982.611 Group home: Lease and HAP contract. For assistance in a group home, there is a separate HAP contract and lease for each assisted person. ...

  7. 43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

    Science.gov (United States)

    2010-10-01

    ... patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest... locations, mineral patents, and mineral leasing within National Forest Wilderness are contained in parts...

  8. 12 CFR 714.2 - What are the permissible leasing arrangements?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false What are the permissible leasing arrangements? 714.2 Section 714.2 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING... leasing. In direct leasing, you purchase personal property from a vendor, becoming the owner of the...

  9. 12 CFR 714.6 - Are you required to retain salvage powers over the leased property?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Are you required to retain salvage powers over the leased property? 714.6 Section 714.6 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS LEASING § 714.6 Are you required to retain salvage powers over the leased...

  10. Farm Equipment Leasing. A New Financial Strategy. Staff Report No. AGES870302.

    Science.gov (United States)

    Serletis, William S.

    For farmers with high debt/asset ratios, leasing is an attractive option for securing the use of farm machinery. Under the current tax laws, financial leasing carries lower after-tax costs than loan purchasing. By size, farms with more than $500,000 in sales had the highest proportion of U.S. expenditures for farm equipment leasing. By region, the…

  11. 30 CFR 203.63 - Does my application have to include all leases in the field?

    Science.gov (United States)

    2010-07-01

    ...) The Regional Director maintains a Field Names Master List with updates of all leases in each... application for all leases that are part of the designated field on the date of application, except as... eventually become part of the authorized field. Therefore, if you have any other leases that you believe may...

  12. 18 CFR 367.1011 - Account 101.1, Property under capital leases.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Account 101.1, Property under capital leases. 367.1011 Section 367.1011 Conservation of Power and Water Resources FEDERAL ENERGY... date, (4) Original cost or fair market value of property leased, (5) Future minimum lease payments, (6...

  13. 75 FR 32221 - Whirlpool Corporation, Evansville Division, Including On-Site Leased Workers from Andrews...

    Science.gov (United States)

    2010-06-07

    ..., Evansville Division, Including On-Site Leased Workers from Andrews International, Inc., Evansville, IN... that workers leased from Andrews International, Inc. were employed on-site at the Evansville, Indiana... findings, the Department is amending this certification to include leased workers from Andrews...

  14. 75 FR 41895 - Whirlpool Corporation, Evansville Division, Including On-Site Leased Workers From Andrews...

    Science.gov (United States)

    2010-07-19

    ..., Evansville Division, Including On-Site Leased Workers From Andrews International, Inc., M.H. Equipment, and... 10321). The notice was amended on May 25, 2010 to include on-site leased workers from Andrews... workers of Whirlpool Corporation, Evansville Division, including on-site leased workers from Andrews...

  15. 76 FR 26178 - Modifications to Treatment of Aircraft and Vessel Leasing Income

    Science.gov (United States)

    2011-05-06

    ... Modifications to Treatment of Aircraft and Vessel Leasing Income AGENCY: Internal Revenue Service (IRS... final regulations addressing the treatment of certain income and assets related to the leasing of... controlled foreign corporations that derive income from the leasing of aircraft or vessels in foreign...

  16. 49 CFR 604.8 - Leasing FTA funded equipment and drivers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Leasing FTA funded equipment and drivers. 604.8... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.8 Leasing FTA funded equipment and drivers. (a) A recipient may lease its FTA-funded equipment and drivers to registered charter providers...

  17. 30 CFR 285.231 - How will MMS process my unsolicited request for a noncompetitive lease?

    Science.gov (United States)

    2010-07-01

    ... a noncompetitive lease? 285.231 Section 285.231 Mineral Resources MINERALS MANAGEMENT SERVICE... described in §§ 285.640 through 285.648. (e) The MMS will coordinate and consult with affected Federal.... (1) Within 10 business days after you receive the lease copies you must: (i) Execute the lease; (ii...

  18. 12 CFR 616.6300 - Leasing policies, procedures, and underwriting standards.

    Science.gov (United States)

    2010-01-01

    ... property and associated risks; (e) Property tax and sales tax reporting; (f) Title and ownership of leased... engaged in lease underwriting must adopt a written policy (or policies). Management, at the direction of the board, must develop procedures that reflect lease practices that control risk and comply with all...

  19. 36 CFR 18.5 - May property be leased without receiving fair market value rent?

    Science.gov (United States)

    2010-07-01

    ... without receiving fair market value rent? 18.5 Section 18.5 Parks, Forests, and Public Property NATIONAL... leased without receiving fair market value rent? Property may be leased under this part only if the lease requires payment of rent to the government equal to or higher than the property's fair market value rent...

  20. Busted Butte Phase 2: Introduction and Analytical Modeling of Nonreactive Tracer and Lithium Breakthrough

    International Nuclear Information System (INIS)

    Turin, H.J.; Soll, W.E.

    2002-01-01

    The Busted Butte Unsaturated-Zone Transport Test Facility is located approximately 8 km southeast of Yucca Mountain, and was designed to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain. Busted Butte Phase 2 consisted of a 10m x 10m x 7m test block. From July 1988 through October 2000, complex tracer mixtures were injected continuously at 77 discrete points located along eight parallel 10-m boreholes arranged in two horizontal planes. In August 1999, iodide was added to the tracer mixture to explore the effects of initial hydraulic transients. During the course of the experiment, porewater samples were collected at regular intervals using sorbing-paper collection pads, emplaced into fifteen horizontal and inclined 10-m collection boreholes, oriented perpendicular to the injection boreholes. Potential travel distances ranged from 20 cm to over 500 cm. Nonreactive tracer and weakly sorbing lithium breakthrough was observed at most of the collection points during the injection period. Following termination of injection, approximately 800 rock samples were collected using overcore and mineback techniques, and analyzed for tracer concentration. Rock analyses are discussed in a subsequent paper. To complement complex 3-dimensional finite-element modeling of the entire block, bromide, iodide, and lithium breakthrough onto the collection pads has been modeled with CXTFIT. This simple 1-dimensional analytical code uses a non-linear curve-fitting routine to estimate transport parameters including apparent velocity, dispersivity, and field retardation factors. Preliminary results show that: (1) Bromide and iodide behaved similarly, despite the fact that bromide was injected in a strongly transient flow field, while iodide injection began after flow had approached steady state conditions. (2) With the exception of the closest collection points, tracer velocities remained relatively constant, indicating that transport was

  1. Wired for success: A history of the Butte, Anaconda & Pacific Railway, 1892--1985

    Science.gov (United States)

    Mutschler, Charles Vincent

    The Butte, Anaconda & Pacific Railway (BA&P) was a standard gauge common carrier short line railroad within the state of Montana. A subsidiary of the Anaconda Copper Mining Company, the BA&P was built to carry ore from mines at Butte, Montana to Anaconda, twenty-six miles away, for concentrating and smelting. Other freight and passenger business was of secondary importance. In 1912, when General Electric contracted to convert the BA&P from steam to electric operation, the short line became a proving ground for main line railroad electrification, and the center of attention from advocates for electric power. Electric operation was demonstrated to be mechanically superior to the use of steam locomotives on the BA&P. Immediately after the BA&P proved the technological feasibility of high voltage direct current for moving heavy freight trains, the Chicago Milwaukee & St. Paul (CM&St.P) electrified over 600 miles of transcontinental main line using the basic technology demonstrated on the BA&P. However, on long distances of track with relatively few trains such as the CM&St.P, the capital cost of the electric distribution system exceeded the operational savings obtained by use of electric locomotives. Steam locomotives remained the primary form of railroad motive power in the United States until the 1950's, when the diesel-electric locomotive combined the mechanical efficiency of electric motors with an on-board diesel generating plant, eliminating the need for expensive electric power supply and distribution wires of conventional electrics. The BA&P purchased three diesels in the early 1950's, but relied primarily on its electric locomotives until 1967, when diesel operation became less costly than continued use of electric motive power. The BA&P offers a microcosmic view of the transformation of one industry in response to technological and economic forces as the United States moved from reliance on coal-burning steam power to electric power and internal combustion

  2. A Semi-analytical model for creep life prediction of butt-welded joints in cylindrical vessels

    International Nuclear Information System (INIS)

    Zarrabi, K.

    2001-01-01

    There have been many investigations on the life assessment of high temperature weldments used in cylindrical pressure vessels, pipes and tubes over the last two decades or so. But to the author's knowledge, currently, there exists no practical, economical and relatively accurate model for creep life assessment of butt-welded joints in cylindrical pressure vessels. This paper describes a semi-analytical and economical model for creep life assessment of butt-welded joints. The first stage of the development of the model is described where the model takes into account the material discontinuities at the welded joint only. The development of the model to include other factors such as geometrical stress concentrations, residual stresses, etc will be reported separately. It has been shown that the proposed model can estimate the redistributions of stresses in the weld and Haz with an error of less than 4%. It has also been shown that the proposed model can conservatively predict the creep life of a butt-welded joint with an error of less than 16%

  3. A Study on the compensation margin on butt welding joint of Large Steel plates during Shipbuilding construction

    International Nuclear Information System (INIS)

    Kim, J; Jeong, K; Chung, H; Jeong, H; Ji, M; Yun, C; Lee, J

    2015-01-01

    This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ∼ 2 mm in 11t ∼ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000 mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage. (paper)

  4. Land lease contract and prior right of lessee to concluding the new land lease contract - case of Slovakia

    Directory of Open Access Journals (Sweden)

    Anna Bandlerová

    2016-12-01

    Full Text Available Land lease is one of the few possible ways to use the agricultural land effectively. This is caused by problems in the proprietary and user relationships, therefore the agricultural land lease and its legal regulation is especially important for Slovakia. This paper deals with the selected legal arrangements related to the agricultural land lease in Slovakia with an objective to identify application problems faced by lessees and lessors of agricultural land. When regulating the agricultural land lease relationships, the Slovak law maker prefers dispositive legal norms. However, this method is rarely used in the application practice. Contracting parties often focus only on obligatory characters of the contract, relying on the legal text of dispositive provisions. The legal arrangement of the lessee’s prior right to sign the new lease contract attracts a particular attention. Current legal regulation of this lessee’s right seems to be unenforceable; on the other hand, it collides with the basic human rights. This provision needs to be either cancelled or adjusted so that it achieves the objective defined by the law maker and so that it is legally enforceable in compliance with superior legal norms.

  5. Environmental Assessment of Beale AFB Grazing Lease Program

    Science.gov (United States)

    2012-12-01

    Beale AFB will use livestock (cattle, sheep and goats ) on its properties throughout the year as needed for the control of noxious weeds, reduction...initiating a wildfire. California Farm Bureau Federation policy recognizes that grazing is the most practical and environmentally acceptable way to...Site Monitoring Well Installation and Annual Targeted Goat Grazing Project, Placer County, California. 21 September 2011.  

  6. Petrographic Analysis and Geochemical Source Correlation of Pigeon Peak, Sutter Buttes, CA

    Science.gov (United States)

    Novotny, N. M.; Hausback, B. P.

    2013-12-01

    The Sutter Buttes are a volcanic complex located in the center of the Great Valley north of Sacramento. They are comprised of numerous inter-intruding andesite and rhyolite lava domes of varying compositions surrounded by a shallow rampart of associated tephras. The Pigeon Peak block-and-ash flow sequence is located in the rampart and made up of a porphyritic Biotite bearing Hornblende Andesite. The andesite blocks demonstrate a high degree of propylization in hornblende crystals, highly zoned plagioclase, trace olivine, and display a red to gray color gradation. DAR is an andesite dome located less than one mile from Pigeon Peak. Of the 15 to 25 andesite lava domes within four miles from Pigeon Peak, only DAR displays trace olivine, red to grey color stratification, low biotite content, and propylitized hornblende. These characteristic similarities suggest that DAR may be the source for Pigeon Peak. My investigation used microprobe analysis of the DAR and Pigeon Peak feldspar crystals to identify the magmatic history of the magma body before emplacement. Correlation of the anorthite zoning within the feldspars from both locations support my hypothesis that DAR is the source of the Pigeon Peak block-and-ash flow.

  7. IE Information No. 86-104: Unqualified butt splice connectors identified in qualified penetrations

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    During an NRC equipment qualification (EQ) inspection at Dresden Nuclear Power Station, May 19--23, 1986, a deficiency was discovered concerning a lack of similarity between tested and installed nylon insulated butt splices in EQ qualified GE electrical penetrations. commonwealth Edison sent four sample splices removed from Quad Cities Nuclear Power Station to Wyle Laboratory to further substantiate their qualification for use in a harsh environment. These splices were identical to those installed at Dresden. During the testing performed at Wyle Laboratory December 4--5, 1986, all four samples exhibited excessive leakage currents to ground when exposed to a steam environment. Commonwealth Edison consequently declared the splices unqualified and shut down its Quad Cities Unit 1 to rework the splices by wrapping them with previously qualified tape. Dresden Unit 2 has similarly reworked the splices by wrapping them with tape. Duane Arnold Energy Center also has commenced a shutdown in order to make repairs. The short circuits that occurred appeared to start by condensation entering the splice between the wire insulation and the nylon tubing. The arcing caused insulation degradation that then allowed arcs to pass through the insulation to the enclosure

  8. Requirements to gap widths and clamping for CO2 laser butt welding

    DEFF Research Database (Denmark)

    Gong, Hui; Juhl, Thomas Winther

    1999-01-01

    In the experimental study of fixturing and gap width requirements a clamping device for laser butt welding of steel sheets has been developed and tested. It has fulfilled the work and made the gap width experiments possible.It has shown that the maximum allowable gap width to some extent...... is inversely related to the welding speed. Also larger laser power leads to bigger allowable gap widths. The focal point position, though, has little influence on the maximum allowable gap width.During analysis X-ray photos show no interior porosity in the weld seam. Other methods have been applied to measure...... responses from variations in welding parameters.The table below lists the results of the study, showing the maximum allowable gap widths and some corresponding welding parameters.Maximum allowable Gap Width; Welding Speed; Laser Power:0.10 mm2 m/min2, 2.6 kW0.15 mm1 m/min2 kW0.20 mm1 m/min2.6 kW0.30 mm0.5 m...

  9. Application of Phased Array Ultrasonic Testing (PAUT) on Single V-Butt Weld Integrity Determination

    International Nuclear Information System (INIS)

    Amry Amin Abas; Mohd Kamal Shah Shamsudin; Norhazleena Azaman

    2015-01-01

    Phased Array Ultrasonic Testing (PAUT) utilizes arrays of piezoelectric elements that are embedded in an epoxy base. The benefit of having such kind of array is that beam forming such as steering and focusing the beam front possible. This enables scanning patterns such as linear scan, sectorial scan and depth focusing scan to be performed. Ultrasonic phased array systems can potentially be employed in almost any test where conventional ultrasonic flaw detectors have traditionally been used. Weld inspection and crack detection are the most important applications, and these tests are done across a wide range of industries including aerospace, power generation, petrochemical, metal billet and tubular goods suppliers, pipeline construction and maintenance, structural metals, and general manufacturing. Phased arrays can also be effectively used to profile remaining wall thickness in corrosion survey applications. The benefits of PAUT are simplifying inspection of components of complex geometry, inspection of components with limited access, testing of welds with multiple angles from a single probe and increasing the probability of detection while improving signal-to-noise ratio. This paper compares the result of inspection on several specimens using PAUT as to digital radiography. The specimens are welded plates with single V-butt weld made of carbon steel. Digital radiography is done using blue imaging plate with x-ray source. PAUT is done using Olympus MX2 with 5 MHz probe consisting of 64 elements. The location, size and length of defect is compared. (author)

  10. Characterization of magnetically impelled arc butt welded T11 tubes for high pressure applications

    Directory of Open Access Journals (Sweden)

    R. Sivasankari

    2015-09-01

    Full Text Available Magnetically impelled arc butt (MIAB welding is a pressure welding process used for joining of pipes and tubes with an external magnetic field affecting arc rotation along the tube circumference. In this work, MIAB welding of low alloy steel (T11 tubes were carried out to study the microstructural changes occurring in thermo-mechanically affected zone (TMAZ. To qualify the process for the welding applications where pressure could be up to 300 bar, the MIAB welds are studied with variations of arc current and arc rotation time. It is found that TMAZ shows higher hardness than that in base metal and displays higher weld tensile strength and ductility due to bainitic transformation. The effect of arc current on the weld interface is also detailed and is found to be defect free at higher values of arc currents. The results reveal that MIAB welded samples exhibits good structural property correlation for high pressure applications with an added benefit of enhanced productivity at lower cost. The study will enable the use of MIAB welding for high pressure applications in power and defence sectors.

  11. Spectral image analysis of the Hopi Buttes volcanic field, Arizona, U.S.A

    International Nuclear Information System (INIS)

    Gabelman, J.W.; Wescott, T.F.

    1987-01-01

    The possibility of economic deposits, the semi-arid environment and the youth of applied remote-sensing technology suit the Hopi Buttes volcanic field as a test site for the application of multispectral image analysis to geologic interpretation and uranium evaluation. All possible enhancements of seasonal images were created in the General Electric interactive multispectral analyzer, model 100, and photographed for study. Contrast and directional edge-enhancement excellently delineated the patterns of megafractures and lineaments which are obscure to ground observation, but may control vent positions. Two sets of orthogonal groups of megafractures are oriented in the cardinal and diagonal directions; they suggest rotation of the stress ellipsoid, or the overlap of stresses from a differently oriented ellipsoid in a neighboring region. A megacircle of vents suggests a deep cylindrical fracture zone and possible incipient cauldron. Other circular areas with unusually abundant travertine maars or volcanic-material-free pipes suggest incipient collapse. Band ratios, density slices and histogram stretches selectively enhanced and differentiated stratigraphic formations, limburgite, tuff, travertine, gypsum-argillized rock and Fe-enriched rock. These were portrayed successfully on thematic map-images. A signature was derived for uraniferous travertine-marl and used to map its distribution. 30 refs.; 24 figs

  12. Identifying Variations in Hydraulic Conductivity on the East River at Crested Butte, CO

    Science.gov (United States)

    Ulmer, K. N.; Malenda, H. F.; Singha, K.

    2016-12-01

    Slug tests are a widely used method to measure saturated hydraulic conductivity, or how easily water flows through an aquifer, by perturbing the piezometric surface and measuring the time the local groundwater table takes to re-equilibrate. Saturated hydraulic conductivity is crucial to calculating the speed and direction of groundwater movement. Therefore, it is important to document data variance from in situ slug tests. This study addresses two potential sources of data variability: different users and different types of slug used. To test for user variability, two individuals slugged the same six wells with water multiple times at a stream meander on the East River near Crested Butte, CO. To test for variations in type of slug test, multiple water and metal slug tests were performed at a single well in the same meander. The distributions of hydraulic conductivities of each test were then tested for variance using both the Kruskal-Wallis test and the Brown-Forsythe test. When comparing the hydraulic conductivity distributions gathered by the two individuals, we found that they were statistically similar. However, we found that the two types of slug tests produced hydraulic conductivity distributions for the same well that are statistically dissimilar. In conclusion, multiple people should be able to conduct slug tests without creating any considerable variations in the resulting hydraulic conductivity values, but only a single type of slug should be used for those tests.

  13. Assessment of role of metamorphic remobilization in genesis of uranium ores from Ralston Buttes area, Colorado

    International Nuclear Information System (INIS)

    Chatterjee, S.K.

    1984-01-01

    The Ralston Buttes mining district, the principal source of commercial uranium in the Front Range since the late 1940s, is located northeast of Golden and southeast of the Front Range mineral belt. Uranium ore occurs in veins emplaced in fault breccia in Precambrian metamorphic rocks. The progenitors of the metamorphic rocks are a possible source for the uranium. Hornblende gneisses of the Idaho Springs Formation is the major rock type in the area, thus its origin is a major consideration in assessing the quantity of uranium that might have been contributed by metamorphic processes. To evaluate this, 41 rock samples (19 hornblende gneisses, 7 biotite gneisses, 5 chlorite gneisses, and 10 metapelites) were analyzed for major elements, and 3 rock samples (16 hornblende gneisses, 8 biotite gneisses, 4 chlorite gneisses, and 5 mica schists) were analyzed for trace metals (Rb, Sc, Zr, V, Ni, Co, Cr, Ba, U, and Th). Four samples of hornblende gneiss and 1 sample of mica schists were also analyzed for rare earth elements. Major elements are rare earth data indicate that the hornblende gneiss was derived from sediments and tholeiitic basalts. Trace element data suggest a volcanic provenance for these sediments. Rare earth patterns and uranium and thorium abundances of metapelites are similar to average North American shales. Low uranium and thorium values and low thorium-uranium ratios in hornblende gneisses and mica schists preclude large-scale uranium remobilization during metamorphism of these source rocks

  14. Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel

    Science.gov (United States)

    Sathiya, P.; Panneerselvam, K.; Soundararajan, R.

    2012-09-01

    Laser welding input parameters play a very significant role in determining the quality of a weld joint. The joint quality can be defined in terms of properties such as weld bead geometry, mechanical properties and distortion. Therefore, mechanical properties should be controlled to obtain good welded joints. In this study, the weld bead geometry such as depth of penetration (DP), bead width (BW) and tensile strength (TS) of the laser welded butt joints made of AISI 904L super austenitic stainless steel were investigated. Full factorial design was used to carry out the experimental design. Artificial Neural networks (ANN) program was developed in MatLab software to establish the relationships between the laser welding input parameters like beam power, travel speed and focal position and the three responses DP, BW and TS in three different shielding gases (Argon, Helium and Nitrogen). The established models were used for optimizing the process parameters using Genetic Algorithm (GA). Optimum solutions for the three different gases and their respective responses were obtained. Confirmation experiment has also been conducted to validate the optimized parameters obtained from GA.

  15. Gulf-Wide Information System, Environmental Sensitivity Index Oyster Leases, Geographic NAD83, LDWF (2001) [esi_oyster_lease_LDWF_2001

    Data.gov (United States)

    Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) oyster leases data of coastal Louisiana. The ESI is a classification and ranking system, which...

  16. 24 CFR 882.511 - Lease and termination of tenancy.

    Science.gov (United States)

    2010-04-01

    ... CFR part 5, subpart L, in all cases where domestic violence, dating violence, or stalking, or criminal activity directly related to domestic violence, dating violence, or stalking is involved or claimed to be... prohibited by HUD. (2) The lease must provide that drug-related criminal activity engaged in on or near the...

  17. 7 CFR 3560.408 - Lease of security property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Lease of security property. 3560.408 Section 3560.408 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, DEPARTMENT OF... facilities related to a housing project (e.g., central kitchens, recreation facilities, laundry rooms, and...

  18. Scooter Leasing : A Cradle-to-Cradle Sound Strategy?

    NARCIS (Netherlands)

    Peters, F.H.J.; De Brito, M.P.

    2010-01-01

    This article investigates the application of the Cradle-to-Cradle approach to the electric scooter vehicle, and how the concept of leasing can be used as a means to make it operational. This research is a result of a research project with Eco-Movement, a Dutch firm currently selling electric

  19. 78 FR 48343 - Reporting and Paying Royalties on Federal Leases

    Science.gov (United States)

    2013-08-08

    ... Federal Government may benefit because (1) the reduced burden of reporting may extend the life on marginal... its leases in the unit or communitization agreement. These imbalances led to numerous questions about... a member of such staff is required to perform work on a specific case. Section 304(b) of FLPMA...

  20. Leases – Public Discussion of a New Common Standard

    OpenAIRE

    Valášková, Mariana

    2011-01-01

    The paper focus on the importance of public discussion for developing a new common standard in case of topical lease accounting. To stimulate the public discussion the IASB and the FASB have done several outreach activities and going to continue in obtaining more views from stakeholders

  1. 76 FR 64099 - Notice of Competitive Coal Lease Sale, Wyoming

    Science.gov (United States)

    2011-10-17

    .... The tract will be leased to the qualified bidder of the highest cash amount provided that the high bid...-way as required by typical mining practices. The total mineable stripping ratio of the coal in bank... containing approximately 0.27 percent sulfur. These quality averages place the coal reserves at the high end...

  2. Buying and leasing real estate for veterinary hospitals.

    Science.gov (United States)

    Salzsieder, Karl R

    2006-03-01

    The major factors to be considered in the real estate purchase decision are the interest rate, the depreciation schedule, the property appreciation, the income tax impact, and the impact of paying a principal payment as part of the real estate mortgage. All these factors must be compared with the costs of leasing.

  3. 32 CFR 644.135 - Lease authorization and approvals.

    Science.gov (United States)

    2010-07-01

    ... work to the Government for the expected life of the lease shall be less than the cost of alternative... geographical area in which the availability of Government-owned space was surveyed, together with reasons for limiting the area. The mission is to be set forth in detail, along with the reason(s) why space in this...

  4. Leasing Retirees: Smart Business or Gaming the System?

    Science.gov (United States)

    Lawton, Stephen B.

    2009-01-01

    In April 2009, a high school principal in a large Arizona school district met individually with 18 of his most senior teachers to inform them that they would not have a job the following year. Why didn't tenure protect them from wholesale dismissal? The answer is they all had one thing in common: they were retirees who had been leased or hired…

  5. RELATIVE PROLIFERATION RISKS FOR NUCLEAR FUEL LEASING ARRANGEMENT

    International Nuclear Information System (INIS)

    CHENG, L.Y.; YUE, M.; BARI, R.A.

    2007-01-01

    The present study demonstrates a probabilistic approach to quantify the proliferation risks of fuel leasing and recycling. A Markov model approach is applied to evaluate the probability of proliferation success by diversion or theft. Proliferation risk is calculated as a product of the probability of success and the corresponding consequences

  6. 47 CFR 76.975 - Commercial leased access dispute resolution.

    Science.gov (United States)

    2010-10-01

    ... declaration and the party submitting the protected material. The Commission has full authority to fashion... leased access complaint within 90 days of the close of the pleading cycle. (2) The Media Bureau, after... the proposals or choose to fashion its own remedy. (i) During the pendency of a dispute, a party...

  7. Lessee's obligations under the oil and gas lease

    International Nuclear Information System (INIS)

    Malcolm, R.T.

    1998-01-01

    Obligations of a lessee under the present day freehold petroleum and natural gas lease are described. The effect of recent cases relating to fiduciary and good faith duties on the lessee's obligations are also examined. Every lease under the Canadian Association of Petroleum Landmen (CAPL) must specifically deal with rights to be granted, the obligations to drill, royalties, the length of the primary term, the amount of the rental rights, rights to pool, and offset obligations. In Alberta, the most accepted petroleum and natural gas lease form is the CAPL 91. This form is presently being revised to create the 1998 version. The contents of this discussion included: (1) historical lease interpretation, (2) fiduciary obligations, (3) the definition of the doctrine of good faith, (4) implied and express covenants, (5) application of the default clause and (6) force majeur provisions. Although Alberta law does not recognize the doctrine of good faith, nevertheless the court will review the obligations of the lessee and if they do not feel that the lessee has acted fairly with respect to the lessor and damages have resulted, the court will find for the lessor

  8. 26 CFR 48.4217-1 - Lease considered as sale.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Lease considered as sale. 48.4217-1 Section 48... article by a manufacturer, producer, or importer shall be considered a sale of the article. The term “lease” means a contract or agreement, written or verbal, which gives the lessee an exclusive, continuous...

  9. Lease accounting trouble looms for corporate real estate management

    NARCIS (Netherlands)

    Baltussen, S.; Schelle, T.G.F.; Appel - Meulenbroek, H.A.J.A.; van Egmond, B.; Hesselink, M.; Leersum, van L.

    2014-01-01

    Purpose – The purpose of this paper is to investigate what impact International Financial Reporting Standards (IFRS) lease accounting changes might have on corporate real estate (CRE) strategies, and what the consequences for future corporate real estate portfolio decisions might be.

  10. Method for strength calculating of structural elements of mobile machines for flash butt welding of rails

    Directory of Open Access Journals (Sweden)

    Andriy Valeriy Moltasov

    2017-12-01

    Full Text Available Purpose. The subject of this study is the strength of the loaded units of mobile machines for flash butt welding by refining high-strength rails. The theme of the work is related to the development of a technique for strength calculating of the insulation of the central axis of these machines. The aim of the paper is to establish the mathematical dependence of the pressure on the insulation on the magnitude of deflections of the central axis under the action of the upset force. Design/methodology/approach. Using the Mohr’s method, the displacements of the investigated sections of the central axis under the action of the upset force and the equivalent load distributed along the length of the insulation were calculated. The magnitude of the load distributed along the length of the insulation equivalent to the draft force was determined from the condition that the displacements of the same cross sections are equal under the action of this load and under the action of the upset force. Results. An analytical expression for establishing the relationship between the pressure acting on the insulation and the magnitude of the upset force and the geometric dimensions of the structural elements of the machine was obtained. Based on the condition of the strength of the insulation for crushing, an analytical expression for establishing the relationship between the length of insulation and the size of the upset force, the geometric dimensions of the structural elements of the machine, and the physical and mechanical properties of the insulation material was obtained. Originality/cost. The proposed methodology was tested in the calculation and design of the K1045 mobile rail welding machine, 4 of which is currently successfully used in the USA for welding rails in hard-to-reach places.

  11. Unravelling the magmatic system beneath a monogenetic volcanic complex (Jagged Rocks Complex, Hopi Buttes, AZ, USA)

    Science.gov (United States)

    Re, G.; Palin, J. M.; White, J. D. L.; Parolari, M.

    2017-12-01

    The Jagged Rocks complex is the eroded remnant of the plumbing systems of closely spaced monogenetic alkaline volcanic centres in the southern Hopi Buttes Volcanic Field (AZ, USA). It contains different clinopyroxene populations with distinctive textures and geochemical patterns. In the Northwestern part of the complex, which exposes the best developed system of conduits, most of the clinopyroxenes consist of large- to medium-sized resorbed cores overgrown by euhedral rims (type 1), small moderately resorbed greenish cores with the same overgrown rims (type 2), and phlogopite as an accessory phase. By contrast, in the Southern part of the complex the majority of clinopyroxenes are euhedral with oscillatory zonation (type 3) and are accompanied by minor euhedral olivine. The differences between these mineral assemblages indicate a composite history of crystallization and magmatic evolution for the two parts of the complex, governed by different mechanisms and ascent patterns from a single source at 50 km depth (16 kbar). The Northwest system preserves a high-pressure assemblage that cooled rapidly from near-liquidus conditions, suggesting direct ascent from the source to the surface at high-to-moderate transport rates (average 1.25 m/s). By contrast, the Southern system represents magma that advanced upward at much lower overall ascent rates, stalling at times to form small-volume mid-crustal storage zones (e.g., sills or a network of sheeted intrusions); this allowed the re-equilibration of the magma at lower pressure ( 30 km; 8 kbar), and led to nucleation and growth of euhedral clinopyroxene and olivine phenocrysts.

  12. 77 FR 1743 - Discount Rates for Cost-Effectiveness Analysis of Federal Programs

    Science.gov (United States)

    2012-01-11

    ... OFFICE OF MANAGEMENT AND BUDGET Discount Rates for Cost-Effectiveness Analysis of Federal Programs... Appendix C are to be used for cost-effectiveness analysis, including lease-purchase analysis, as specified... (Revised December 2011) Discount Rates for Cost-Effectiveness, Lease Purchase, and Related Analyses...

  13. 76 FR 7881 - Discount Rates for Cost-Effectiveness Analysis of Federal Programs

    Science.gov (United States)

    2011-02-11

    ... OFFICE OF MANAGEMENT AND BUDGET Discount Rates for Cost-Effectiveness Analysis of Federal Programs... Appendix C are to be used for cost-effectiveness analysis, including lease-purchase analysis, as specified... (Revised December 2010) DISCOUNT RATES FOR COST-EFFECTIVENESS, LEASE PURCHASE, AND RELATED ANALYSES...

  14. 78 FR 6140 - Discount Rates for Cost-Effectiveness Analysis of Federal Programs

    Science.gov (United States)

    2013-01-29

    ... OFFICE OF MANAGEMENT AND BUDGET Discount Rates for Cost-Effectiveness Analysis of Federal Programs... in Appendix C are to be used for cost-effectiveness analysis, including lease-purchase analysis, as...) Discount Rates for Cost-Effectiveness, Lease Purchase, and Related Analyses Effective Dates. This appendix...

  15. A novel weld seam detection method for space weld seam of narrow butt joint in laser welding

    Science.gov (United States)

    Shao, Wen Jun; Huang, Yu; Zhang, Yong

    2018-02-01

    Structured light measurement is widely used for weld seam detection owing to its high measurement precision and robust. However, there is nearly no geometrical deformation of the stripe projected onto weld face, whose seam width is less than 0.1 mm and without misalignment. So, it's very difficult to ensure an exact retrieval of the seam feature. This issue is raised as laser welding for butt joint of thin metal plate is widely applied. Moreover, measurement for the seam width, seam center and the normal vector of the weld face at the same time during welding process is of great importance to the welding quality but rarely reported. Consequently, a seam measurement method based on vision sensor for space weld seam of narrow butt joint is proposed in this article. Three laser stripes with different wave length are project on the weldment, in which two red laser stripes are designed and used to measure the three dimensional profile of the weld face by the principle of optical triangulation, and the third green laser stripe is used as light source to measure the edge and the centerline of the seam by the principle of passive vision sensor. The corresponding image process algorithm is proposed to extract the centerline of the red laser stripes as well as the seam feature. All these three laser stripes are captured and processed in a single image so that the three dimensional position of the space weld seam can be obtained simultaneously. Finally, the result of experiment reveals that the proposed method can meet the precision demand of space narrow butt joint.

  16. In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser

    International Nuclear Information System (INIS)

    Kawahito, Yousuke; Kito, Masayuki; Katayama, Seiji

    2007-01-01

    A gap is one of the most important issues to be solved in laser welding of a micro butt joint, because the gap results in welding defects such as underfilling or a non-bonded joint. In-process monitoring and adaptive control has been expected as one of the useful procedures for the stable production of sound laser welds without defects. The objective of this research is to evaluate the availability of in-process monitoring and adaptive control in micro butt welding of pure titanium rods with a pulsed neodymium : yttrium aluminium garnet (Nd : YAG) laser beam of a 150 μm spot diameter. It was revealed that a 45 μm narrow gap was detected by the remarkable jump in a reflected light intensity due to the formation of the molten pool which could bridge the gap. Heat radiation signal levels increased in proportion to the sizes of molten pools or penetration depths for the respective laser powers. As for adaptive control, the laser peak power was controlled on the basis of the reflected light or the heat radiation signals to stably produce a sound deeply penetrated weld reduced underfilling. In the case of a 100 μm gap, the underfilling was greatly reduced by half smaller than those made with a conventional rectangular pulse shape in seam welding as well as spot welding with a pulsed Nd : YAG laser beam. Consequently, the adaptive control of the laser peak power on the basis of in-process monitoring could reduce the harmful effects due to a gap in micro butt laser welding with a pulsed laser beam

  17. Monogenetic volcanoes fed by interconnected dikes and sills in the Hopi Buttes volcanic field, Navajo Nation, USA

    Science.gov (United States)

    Muirhead, James D.; Van Eaton, Alexa R.; Re, Giuseppe; White, James D. L.; Ort, Michael H.

    2016-01-01

    Although monogenetic volcanic fields pose hazards to major cities worldwide, their shallow magma feeders (networks. Analysis of vent alignments using the pyroclastic massifs and other eruptive centers (e.g., maar-diatremes) shows a NW-SE trend, parallel to that of dikes in the region. We therefore infer that dikes fed many of the eruptions. Dikes are also observed in places transforming to transgressive (ramping) sills. Estimates of the observable volume of dikes (maximum volume of 1.90 × 106 m3) and sills (minimum volume of 8.47 × 105 m3) in this study reveal that sills at Hopi Buttes make up at least 30 % of the shallow intruded volume (∼2.75 × 106 m3 total) within 350 m of the paeosurface. We have also identified saucer-shaped sills, which are not traditionally associated with monogenetic volcanic fields. Our study demonstrates that shallow feeders in monogenetic fields can form geometrically complex networks, particularly those intruding poorly consolidated sedimentary rocks. We conclude that the Hopi Buttes eruptions were primarily fed by NW-SE-striking dikes. However, saucer-shaped sills also played an important role in modulating eruptions by transporting magma toward and away from eruptive conduits. Sill development could have been accompanied by surface uplifts on the order of decimeters. We infer that the characteristic feeder systems described here for the Hopi Buttes may underlie monogenetic fields elsewhere, particularly where magma intersects shallow, and often weak, sedimentary rocks. Results from this study support growing evidence of the important role of shallow sills in active monogenetic fields.

  18. Butt pressure welding of wheels from vehicles consisting of steel and aluminium; Pressstumpfschweissen von Fahrzeugraedern aus Stahl und Aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Grobelin, K. [Hess Engineering AG, Frauenfeld (Switzerland)

    2001-07-01

    Every year in Europe 35 million wheels for vehicles are produced. Most of them are wheels consisting of metal tapes, both of steel and of aluminium alloys. The manufacturing of wheels is explained, in detail the method known as DC upset welding used for butt joints of wheel-rims. The engaged machinery, the specials of welding various materials, the limits of the method, and the quality assurance are discussed. Advantages of the applied method are joints of first-class quality, high productivity, energy saving and environmental cleanness. (orig.)

  19. Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

    Science.gov (United States)

    Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

    2011-01-01

    What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations

  20. A Methodology for the Assessment of Unconventional (Continuous) Resources with an Application to the Greater Natural Buttes Gas Field, Utah

    International Nuclear Information System (INIS)

    Olea, Ricardo A.; Cook, Troy A.; Coleman, James L.

    2010-01-01

    The Greater Natural Buttes tight natural gas field is an unconventional (continuous) accumulation in the Uinta Basin, Utah, that began production in the early 1950s from the Upper Cretaceous Mesaverde Group. Three years later, production was extended to the Eocene Wasatch Formation. With the exclusion of 1100 non-productive ('dry') wells, we estimate that the final recovery from the 2500 producing wells existing in 2007 will be about 1.7 trillion standard cubic feet (TSCF) (48.2 billion cubic meters (BCM)). The use of estimated ultimate recovery (EUR) per well is common in assessments of unconventional resources, and it is one of the main sources of information to forecast undiscovered resources. Each calculated recovery value has an associated drainage area that generally varies from well to well and that can be mathematically subdivided into elemental subareas of constant size and shape called cells. Recovery per 5-acre cells at Greater Natural Buttes shows spatial correlation; hence, statistical approaches that ignore this correlation when inferring EUR values for untested cells do not take full advantage of all the information contained in the data. More critically, resulting models do not match the style of spatial EUR fluctuations observed in nature. This study takes a new approach by applying spatial statistics to model geographical variation of cell EUR taking into account spatial correlation and the influence of fractures. We applied sequential indicator simulation to model non-productive cells, while spatial mapping of cell EUR was obtained by applying sequential Gaussian simulation to provide multiple versions of reality (realizations) having equal chances of being the correct model. For each realization, summation of EUR in cells not drained by the existing wells allowed preparation of a stochastic prediction of undiscovered resources, which range between 2.6 and 3.4 TSCF (73.6 and 96.3 BCM) with a mean of 2.9 TSCF (82.1 BCM) for Greater Natural Buttes

  1. 3-D Characteristics of the Residual Stress in the Plate Butt Weld Between SA508 and F316L SS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoung Soo; Kim, Tae Ryong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of); Park, Jai Hak [Chungbuk National University, Cheongju (Korea, Republic of); Kim, Man Won [GNEC, Daejeon (Korea, Republic of); Cho, Seon Yeong [KLES, Daejeon (Korea, Republic of)

    2009-04-15

    This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

  2. Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Carlone, P.; Citarella, R.

    2015-01-01

    This paper deals with a numerical and experimental investigation on the influence of residual stresses on fatigue crack growth in AA2024-T3 friction stir welded butt joints. An integrated FEM-DBEM procedure for the simulation of crack propagation is proposed and discussed. A numerical FEM model...... of the welding process of precipitation hardenable AA2024-T3 aluminum alloy is employed to infer the process induced residual stress field. The reliability of the FEM simulations with respect to the induced residual stresses is assessed comparing numerical outcomes with experimental data obtained by means...

  3.  Ischemic Stroke Secondary to Aortic Dissection Following Rifle Butt Recoil Chest Injury: A Case Report

    Directory of Open Access Journals (Sweden)

    John Valiath

    2011-11-01

    Full Text Available  Ischemic stroke secondary to aortic dissection is not uncommon. We present a patient with left hemiplegia secondary to Stanford type A aortic dissection extending to the supra-aortic vessels, which was precipitated by rifle butt recoil chest injury. The diagnosis of aortic dissection was delayed due to various factors. Finally, the patient underwent successful Bentall procedure with complete resolution of symptoms. This case emphasizes the need for caution in the use of firearms for recreation and to take precautions in preventing such incidents. In addition, this case illustrates the need for prompt cardiovascular physical examination in patients presenting with stroke.

  4. Tool material effect on the friction stir butt welding of AA2124-T4 Alloy Matrix MMC

    Directory of Open Access Journals (Sweden)

    Yahya Bozkurt

    2018-01-01

    Full Text Available The purpose of the present work is to study on the effect of material properties tool on friction stir butt welding of AA2124-T4 alloy matrix MMC. Uncoated tool, coated tool with a CrN, and coated tool with AlTiN were used to weld aluminum MMC plates. Macrostructure and microstructure observations, ultimate tensile strength, wear resistance, and chemical analysis were carried out to determine the appropriate tool for joining these composite plates. Results showed that the good welded joints could be obtained when a tool is coated with AlTiN.

  5. Aluminum 6060-T6 friction stir welded butt joints: fatigue resistance with different tools and feed rates

    International Nuclear Information System (INIS)

    Baragetti, S.; D'Urso, G.

    2014-01-01

    The fatigue behavior of AA6060-T6 friction stir welded butt joints was investigated. The joints were produced by using both a standard and a threaded tri-flute cylindrical-tool with flat shoulder. The friction stir welding process was carried out using different feed rates. Preliminary tensile tests, micrograph analyses and hardness profile measurements across the welds were carried out. Welded and unwelded fatigue samples were tested under axial loading (R = 0.1) with upper limits of 10 4 and 10 5 cycles, using threaded and unthreaded (standard) tools at different feed rates. The best tensile and fatigue performance was obtained using the standard tool at low feed rate.

  6. 30 CFR 203.71 - How does MMS allocate a field's suspension volume between my lease and other leases on my field?

    Science.gov (United States)

    2010-07-01

    ... RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Pre-Act Deep Water Leases and for Development... or post-November 2000 deep water lease to your field after we approve your application We will not..., or the minimum suspension volume of the authorized field, whichever is greater (i) You toll the time...

  7. Stress Distribution in the Dissimilar Metal Butt Weld of Nuclear Reactor Piping due to the Simulation Technique for the Repair Welding

    International Nuclear Information System (INIS)

    Lee, Hweeseung; Huh, Namsu; Kim, Jinsu; Lee, Jinho

    2013-01-01

    During welding, the dissimilar metal butt welds of nuclear piping are typically subjected to repair welding in order to eliminate defects that are found during post-weld inspection. It has been found that the repair weld can significantly increase the tensile residual stress in the weldment, and therefore, accurate estimation of the weld residual stress due to repair weld, especially for dissimilar metal welds using Ni-based alloy 82/182 in nuclear components, is of great importance in order to assess susceptibility to primary water stress corrosion cracking. In the present study, the stress distributions of dissimilar metal butt welds in nuclear reactor piping subjected to repair weld were investigated based on detailed nonlinear finite element analyses. Particular emphasis was placed on the variation of the stress distribution in the dissimilar metal butt weld according to the finite element welding analysis sequence for the repair welding process

  8. Busted Butte Phase 2: Analysis of Post-Test Mineback and Overcore Rock Samples

    International Nuclear Information System (INIS)

    Turin, H.J.; McGraw, M.A.; Jones, C.L.; Scism, C.D.; Soll, W.E.

    2002-01-01

    A complex tracer mixture was injected continuously for over two years into a 10 x 10 x 7 m block of tuff as part of the unsaturated-zone (UZ) tracer test at Busted Butte. The test was designed to address uncertainties associated with flow and transport models within the Topopah Springs and Calico Hills tuffs. The tracer mixture included nonreactive (Br, I, and FBAs) and reactive tracers (Li, Ce, Sm, Ni, Coy and Mn) and synthetic colloids. Once injection was completed, samples from the block were collected in two ways. Overcores were taken from around and below injection holes. Then, the entire block was excavated via mineback--during which progressive vertical planes of the block were exposed. Samples from the overcores and mineback were analyzed to determine the distribution of tracers on different spatial scales than available from collection borehole data. Rock analyses confirmed collection pad results that the nonreactive tracers, Br and FBAs, moved several meters. Furthermore, Br and FBAs are observed above and lateral to the injector planes suggesting that capillarity was an important process for tracer movement. Lithium, the most mobile of the metals, was transported on a scale of meters. This is consistent with laboratory sorption measurements and observed breakthrough on the collection pads. Co and Ni show transport distances of tens of cm, while Sm and Ce moved far less, possibly due to precipitation and sorption effects. Colloid transport was assessed using 1 ft3 blocks extracted from the BB Phase 2 block. In the Calico Hills material, after 15 L of water was injected over 3.5 months, less than 1% of the colloids injected were recovered. Flow patterns in the block indicate that water injected at the center imbibed outward from the injection point. In a block taken from a boundary of the Calico Hills ashfall layer, breakthrough was observed only due to fractures formed during drying of the block. The colloid transport module for FEHM was tested against

  9. Geologic map of the Strawberry Butte 7.5’ quadrangle, Meagher County, Montana

    Science.gov (United States)

    Reynolds, Mitchell W.; Brandt, Theodore R.

    2017-06-19

    The 7.5′ Strawberry Butte quadrangle in Meagher County, Montana near the southwest margin of the Little Belt Mountains, encompasses two sharply different geologic terranes.  The northern three-quarters of the quadrangle are underlain mainly by Paleoproterozoic granite gneiss, across which Middle Cambrian sedimentary rocks rest unconformably.  An ancestral valley of probable late Eocene age, eroded northwest across the granite gneiss terrane, is filled with Oligocene basalt and overlying Miocene and Oligocene sandstone, siltstone, tuffaceous siltstone, and conglomerate.  The southern quarter of the quadrangle is underlain principally by deformed Mesoproterozoic sedimentary rocks of the Newland Formation, which are intruded by Eocene biotite hornblende dacite dikes.  In this southern terrane, Tertiary strata are exposed only in a limited area near the southeast margin of the quadrangle.  The distinct terranes are juxtaposed along the Volcano Valley fault zone—a zone of recurrent crustal movement beginning possibly in Mesoproterozoic time and certainly established from Neoproterozoic–Early Cambrian to late Tertiary time.  Movement along the fault zone has included normal faulting, the southern terrane faulted down relative to the northern terrane, some reverse faulting as the southern terrane later moved up against the northern terrane, and lateral movement during which the southern terrane likely moved west relative to the northern terrane.  Near the eastern margin of the quadrangle, the Newland Formation is locally the host of stratabound sulfide mineralization adjacent to the fault zone; west along the fault zone across the remainder of the quadrangle are significant areas and bands of hematite and iron-silicate mineral concentrations related to apparent alteration of iron sulfides.  The map defines the distribution of a variety of surficial deposits, including the distribution of hematite-rich colluvium and iron-silicate boulders.  The southeast

  10. Busted Butte report on laboratory radionuclide migration experiments in non-welded tuff under unsaturated conditions

    Energy Technology Data Exchange (ETDEWEB)

    Vandergraaf, T.T.; Drew, D.J.; Ticknor, K.V

    2002-11-01

    Three blocks of non-welded tuff, one nominally one cubic foot (trial block) and the other two, nominally one cubic metre (1 m{sup 3}), were excavated from the Busted Butte Test Facility on the Nevada Test Site and transported to the Atomic Energy of Canada Limited Whiteshell Laboratories in Pinawa, Manitoba. The trial block and one of the 1-m{sup 3} blocks were used for unsaturated flow experiments. The remaining 1-m{sup 3} block is being used for saturated flow experiments and will be reported on separately. After a vertical flow of synthetic transport solution was set up under unsaturated conditions, a suite of conservative and chemically reactive radionuclide tracers was injected at volumetric flow rates of 20 mL/hr in the trial block, and 10 mL/hr in the 1-m{sup 3} block. The duration of the migration experiment in the trial block was 87 days, while the migration experiment in the 1-m{sup 3} block was continuing after 600 days. Results obtained from the migration experiment in the trial block showed that transport of {sup 95m+99}Tc, injected as the pertechnetate (an)ion, was slightly faster than that of the transport solution, using tritiated water ({sup 3}H{sub 2}O) as a flow indicator. Retardation of {sup 237}Np was consistent with that predicted from results obtained in supporting static batch sorption studies. Post-migration analysis of the flow field in the trial block showed that the front of the {sup 22}Na had migrated about half the distance through the block, and that {sup 60}Co and {sup 137}Cs had been retained near the inlet. This observation agrees qualitatively with that predicted from the results from static batch sorption studies. In the larger scale experiment, the transport behavior of Tc is very similar to that of the transport solution at this point in time. None of the other radionuclide tracers have been detected in water collected from this block. This observation is consistent with the observations for the smaller block. (author)

  11. Microstructure feature of friction stir butt-welded ferritic ductile iron

    International Nuclear Information System (INIS)

    Chang, Hung-Tu; Wang, Chaur-Jeng; Cheng, Chin-Pao

    2014-01-01

    Highlights: • Defect-free ferritic ductile iron joints is fabricated by FSW. • The welding nugget is composed of graphite, martensite, and recrystallized ferrite. • The graphite displays a striped pattern in the surface and advancing side. • The ferritic matrix transforms into martensite structure during welding. • High degree of plastic deformation is found on the advancing side. - Abstract: This study conducted friction stir welding (FSW) by using the butt welding process to join ferritic ductile iron plates and investigated the variations of microsturcture in the joined region formed after welding. No defects appeared in the resulting experimental weld, which was formed using a 3-mm thick ductile iron plate and tungsten carbide alloy stir rod to conduct FSW at a rotational speed of 982 rpm and traveling speed of 72 mm/min. The welding region was composed of deformed graphite, martensite phase, and dynamically recrystallized ferrite structures. In the surface region and on the advancing side (AS), the graphite displayed a striped configuration and the ferritic matrix transformed into martensite. On the retreating side (RS), the graphite surrounded by martensite remained as individual granules and the matrix primarily comprised dynamically recrystallized ferrite. After welding, diffusion increased the carbon content of the austenite around the deformed graphite nodules, which transformed into martensite during the subsequent cooling process. A micro Vickers hardness test showed that the maximum hardness value of the martensite structures in the weld was approximately 800 HV. An analysis using an electron probe X-ray microanalyzer (EPMA) indicated that its carbon content was approximately 0.7–1.4%. The peak temperature on the RS, 8 mm from the center of the weld, measured 630 °C by the thermocouple. Overall, increased severity of plastic deformation and process temperature near the upper stir zone (SZ) resulted in distinct phase transformation

  12. The Growing Importance and Value Implications of Recreational Hunting Leases to Agricultural Land Investors in America

    OpenAIRE

    John S. Baen

    1997-01-01

    This study considers the evolution and explosion growth of recreational hunting leases in America. The traditional European practice of leasing rural lands for the exclusive rights of tenants to hunt and fish is now an important revenue source for American agricultural land investors/owners. Hunting lease income can enhance value to the point that recreation becomes the highest and best use of rural land for both the market and income approaches to valuation. This study offers new perspective...

  13. PENGARUH BESAR ARUS LISTRIK DENGAN MENGGUNAKAN ELEKTRODA SMAW TERHADAP KEKUATAN SAMBUNGAN LAS BUTT JOINT PADA PLAT MILD STEEL

    Directory of Open Access Journals (Sweden)

    Sarjito Jokosisworo

    2012-03-01

    Full Text Available The influence of mechanic disposition, is one of the factor influence ship strength. This influence can be test by mechanical test in welding butt joint. The result test database analysis can be conclude that very helpful to increase safety and quality butt joint. With steel specification C= 0,15%, Si= 0,24%, Mn= 0,88%,P= 0,018%, S= 0,034%. This material give a 90, 110, 125 ampere with SMAW AC electrode diameter 3,2 mm x 350 mm with V root and 600 angle In the fabrication of mild steel products, components or equipment, manufacturers employ welding as the principal joining method. Mild steel are weldable materials, and a welded joint can provide optimum corrosion resistance, strength, and fabrication economy. However, designers should recognize that any metal, including stainless steels, may undergo certain changes during welding. It is necessary, therefore, to exercise a reasonable degree of care during welding to minimize or prevent any deleterious effects that may occur, and to preserve the same degree of corrosion resistance and strength in weld zone that is an intheren part of the base metal

  14. Special metallurgy - the electrical butt-welding by flashing of sintered magnesium-magnesium oxide composites (1963)

    International Nuclear Information System (INIS)

    Charleux, J.

    1963-01-01

    Electrical resistance welding has become quite important since World War II because of the need of a high yield in aeronautical production. Progress has been due in particular to the improvements made in electronically controlled apparatus making possible the automatic control of welding. For the butt-welding of sections requiring either a high production rate or a high quality weld, the flash butt-welding system has been very much developed these last few years. The use of this welding method is of great importance in the field of the bonding of oxidisable metals such as magnesium or aluminium and its alloys, because the welded joint is free from oxides. This study consists of general considerations on the flash-welding process with regard to temperature distribution in the parts during welding, and to electrical phenomena connected with flashing. Besides this general or theoretical section, we have applied the welding process to the bonding of sintered magnesium, a magnesium-magnesium oxide composite, whose use as a structural element in nuclear reactors is considered. (author) [fr

  15. Competitive bidding for OCS leases and environmental risk

    International Nuclear Information System (INIS)

    Englin, J.E.; Klan, M.S.

    1990-01-01

    In the last few years, the role of environment has become increasingly contentious in the process of competitive bidding for exploration and development rights of offshore petroleum leases in the outer continental shelf (OCS). Although an extensive literature exists on OCS leasing per se, relatively little work focuses on the role of environmental factors. This paper examines the effect on environmental risk on the number of firms (or joint ventures) entering bids for a given tract, which relates to the effective competition for the tracts. The next section outlines a theoretical model of bidding behavior under environmental risk. The third section presents the data used to estimate the model. The fourth section gives empirical results of an analysis of Sale No. 42, conducted in 1979 for Georges Bank in the North Atlantic. The last section provides concluding remarks

  16. LEASE AGREEMENTS FINANCIAL REPORTING ISSUES ACCORDING TO THE INTERNATIONAL STANDARDS

    Directory of Open Access Journals (Sweden)

    Marina MAISURADZE

    2016-08-01

    Full Text Available On January 13th 2016, the Board for International Accounting Standards  published the  new International Standard 16 of Financial Reporting,   named as “Lease”, which will substitute the International Accounting Standard 17 of financial reporting “Lease”. ISFR 16 ensures reflection of practically all lease agreements in the financial reporting, which, in is part, meets the requirements of investors regarding reliability and transparency of the information related to a financial state of an enterprise. The Article considers the changes caused by ISFR 16, which relate to recognition of the lease agreements as the asset, their accounting and, impact on the financial reporting. Relevant conclusions are provided regarding the above mentioned issues.

  17. The Feasibility of Solar Panel Leasing in Finland

    OpenAIRE

    Nyberg, Nico

    2016-01-01

    The aim of this thesis was to analyse the feasibility of solar panel leasing in Finland. The research was conducted using the exploratory research design, utilizing both qualitative and quantitative data. The data was collected from secondary sources, e.g. industry reports, government publications, and newspaper articles. During the literature review, methods for answering the thesis question were recognized. The chosen method was to analyse the market and industry feasibility, product or ser...

  18. Competitive Analysis for Online Leasing Problem with Compound Interest Rate

    OpenAIRE

    Yang, Xingyu; Zhang, Weiguo; Xu, Weijun; Zhang, Yong

    2011-01-01

    We introduce the compound interest rate into the continuous version of the online leasing problem and discuss the generalized model by competitive analysis. On the one hand, the optimal deterministic strategy and its competitive ratio are obtained; on the other hand, a nearly optimal randomized strategy is constructed and a lower bound for the randomized competitive ratios is proved by Yao's principle. With the help of numerical examples, the theoretical results show that the interest rate pu...

  19. Battery Ownership Model - Medium Duty HEV Battery Leasing & Standardization

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Ken; Smith, Kandler; Cosgrove, Jon; Prohaska, Robert; Pesaran, Ahmad; Paul, James; Wiseman, Marc

    2015-12-01

    Prepared for the U.S. Department of Energy, this milestone report focuses on the economics of leasing versus owning batteries for medium-duty hybrid electric vehicles as well as various battery standardization scenarios. The work described in this report was performed by members of the Energy Storage Team and the Vehicle Simulation Team in NREL's Transportation and Hydrogen Systems Center along with members of the Vehicles Analysis Team at Ricardo.

  20. Assessment of blood lead level declines in an area of historical mining with a holistic remediation and abatement program.

    Science.gov (United States)

    Schoof, Rosalind A; Johnson, Dina L; Handziuk, Emma R; Landingham, Cynthia Van; Feldpausch, Alma M; Gallagher, Alexa E; Dell, Linda D; Kephart, Amy

    2016-10-01

    Lead exposure and blood lead levels (BLLs) in the United States have declined dramatically since the 1970s as many widespread lead uses have been discontinued. Large scale mining and mineral processing represents an additional localized source of potential lead exposure in many historical mining communities, such as Butte, Montana. After 25 years of ongoing remediation efforts and a residential metals abatement program that includes blood lead monitoring of Butte children, examination of blood lead trends offers a unique opportunity to assess the effectiveness of Butte's lead source and exposure reduction measures. This study examined BLL trends in Butte children ages 1-5 (n= 2796) from 2003-2010 as compared to a reference dataset matched for similar demographic characteristics over the same period. Blood lead differences across Butte during the same period are also examined. Findings are interpreted with respect to effectiveness of remediation and other factors potentially contributing to ongoing exposure concerns. BLLs from Butte were compared with a reference dataset (n=2937) derived from the National Health and Nutrition Examination Survey. The reference dataset was initially matched for child age and sample dates. Additional demographic factors associated with higher BLLs were then evaluated. Weights were applied to make the reference dataset more consistent with the Butte dataset for the three factors that were most disparate (poverty-to-income ratio, house age, and race/ethnicity). A weighted linear mixed regression model showed Butte geometric mean BLLs were higher than reference BLLs for 2003-2004 (3.48vs. 2.05µg/dL), 2005-2006 (2.65vs. 1.80µg/dL), and 2007-2008 (2.2vs. 1.72µg/dL), but comparable for 2009-2010 (1.53vs. 1.51µg/dL). This trend suggests that, over time, the impact of other factors that may be associated with Butte BLLs has been reduced. Neighborhood differences were examined by dividing the Butte dataset into the older area called "Uptown

  1. Case studies of geothermal leasing and development on federal lands

    Energy Technology Data Exchange (ETDEWEB)

    Trummel, Marc

    1978-09-29

    In response to a widely expressed need to examine the impact of the federal regulatory system on the rate of geothermal power development, the Department of Energy-Division of Geothermal Energy (DGE) has established a Streamlining Task Force in cooperation with appropriate federal agencies. The intent is to find a way of speeding development by modification of existing laws or regulations or by better understanding and mechanization of the existing ones. The initial focus was on the leasing and development of federal lands. How do the existing processes work? Would changes produce positive results in a variety of cases? These are questions which must be considered in a national streamlining process. This report presents case studies of federal leasing actions on seven diverse locations in the western region. Characteristics of existing high geothermal potential areas are quite diverse; geography, environment, industry interest and the attitudes and activities of the responsible federal land management agencies and the interested public vary widely. Included are descriptions of post and current activities in leasing exploration and development and discussions of the probable future direction of activities based on current plans. Implications of these plans are presented. The case studies were based on field interviews with the appropriate State and District BLM officer and with the regional forester's office and the particular forest office. Documentation was utilized to the extent possible and has been included in whole or in part in appendices as appropriate.

  2. Leasing as a Source of Finance by the Major US Airlines: Hidden Debt and its Changes Over Time

    Science.gov (United States)

    Gritta, Richard D.; Lippman, Ellen J.

    2003-01-01

    This paper updates prior research on aircraft leasing and contrasts the findings of current data with prior results. Usage of leases by air carriers is a means to lessen the impact of financial obligations from fleet purchases. The study revisits two previous studies, one in 1969 and one in 1991, which is analyzed the incidence of leases by major air carriers. The current study updates these past studies to consider air carriers current usage of leases. Additionally, since operating leases are not reflected in the balance sheets of airlines, operating lease information was capitalized using a present value of future operating lease payments. Then, financial debt burden ratios were computed to determine the impact from the capitalization of lease information. The usage of operating leases increased, significantly from the first study to the 1991 study, and this trend continues. The incidence of leasing, the classification of leases as operating, and the percentage of operating leases to total fleet have all increased for the majority of the airlines reviewed. When operating lease data were capitalized, debt ratios weakened, providing further evidence of deterioration in the financial health of air carriers.

  3. Metal loading in Soda Butte Creek upstream of Yellowstone National Park, Montana and Wyoming; a retrospective analysis of previous research; and quantification of metal loading, August 1999

    Science.gov (United States)

    Boughton, G.K.

    2001-01-01

    Acid drainage from historic mining activities has affected the water quality and aquatic biota of Soda Butte Creek upstream of Yellowstone National Park. Numerous investigations focusing on metals contamination have been conducted in the Soda Butte Creek basin, but interpretations of how metals contamination is currently impacting Soda Butte Creek differ greatly. A retrospective analysis of previous research on metal loading in Soda Butte Creek was completed to provide summaries of studies pertinent to metal loading in Soda Butte Creek and to identify data gaps warranting further investigation. Identification and quantification of the sources of metal loading to Soda Butte Creek was recognized as a significant data gap. The McLaren Mine tailings impoundment and mill site has long been identified as a source of metals but its contribution relative to the total metal load entering Yellowstone National Park was unknown. A tracer-injection and synoptic-sampling study was designed to determine metal loads upstream of Yellowstone National Park.A tracer-injection and synoptic-sampling study was conducted on an 8,511-meter reach of Soda Butte Creek from upstream of the McLaren Mine tailings impoundment and mill site downstream to the Yellowstone National Park boundary in August 1999. Synoptic-sampling sites were selected to divide the creek into discrete segments. A lithium bromide tracer was injected continuously into Soda Butte Creek for 24.5 hours. Downstream dilution of the tracer and current-meter measurements were used to calculate the stream discharge. Stream discharge values, combined with constituent concentrations obtained by synoptic sampling, were used to quantify constituent loading in each segment of Soda Butte Creek.Loads were calculated for dissolved calcium, silica, and sulfate, as well as for dissolved and total-recoverable iron, aluminum, and manganese. Loads were not calculated for cadmium, copper, lead, and zinc because these elements were infrequently

  4. Competition and performance in OCS oil and gas lease sales and lease development, 1954-1969

    Science.gov (United States)

    Mead, Walter J.; Sorensen, Philip Edward

    1980-01-01

    The oil and gas resources of the Outer Continental Shelf represent one of America's largest publicly-owned assets. Through 1978, OCS oil and gas leases had yielded \\$40.5 billion in gross production value and produced over \\$28.3 billion in direct revenue to the federal government.Policies and procedures for managing the oil and gas resources of the OCS were established by Congress in the Outer Continental Shelf Lands Act of 1953. The Department of Interior was given the central responsibility for carrying out this management role in the 1953 Act; this responsibility has been re-established in the 1978 Amendments to the OCS Lands Act. As stated in the 1978 legislation, the goals of OCS management are to:...preserve, protect and develop oil and natural gas resources in a manner which is consistent with the need (A) to make such resources available to meet the Nation's energy needs as rapidly as possible... (C) to insure the public a fair and equitable return on the resources of the Outer Continental Shelf, and (D) to preserve and maintain free enterprise competition.As part of its continuing effort to monitor the effectiveness of federal policies relating to OCS oil and gas resources, the Conservation Division of U.S. Geological Survey, Department of Interior, has sponsored the research which is the basis for the present report. The objectives of the research have been to determine the extent to which the historical policies of OCS management have resulted in achievement of the goals set forth by Congress in the section quoted above.

  5. Convergence of IFRS and US GAAP in the field of lease: the impact of new methodological approaches for operating lease reporting

    Directory of Open Access Journals (Sweden)

    Patrik Svoboda

    2012-01-01

    Full Text Available Since 2002 the International Accounting Standards Board (IASB and the Financial Accounting Standards Board (FASB has begun significantly cooperate in the creation of standards based on the same principals. This is a process of convergence. It is realized through a series of sub-projects aimed at short-term or long-term period. Revenue recognition and lease reporting projects represent priority areas of convergence. The issue of leases belongs to one of the areas in which there have been, after a relatively long time, criticized the very principles applied in international accounting standards. The result of the convergence activities should be the creation of such methodological approaches of reporting the lease contracts on the side of lessee and then lessor that would eliminate the main weaknesses of the current system of reporting based on the classification of lease contracts in connection with the execution or non execution of the transfer of risks and benefits associated with the lease to the lessee. The aim of this paper is to evaluate the impact of implementation of the newly proposed methodological approach for lease reporting in the field of operating leases into the financial statements that will be affected by this change of methodology (balance sheet, income statement. Subsequently, it is evaluated also the impact into selected indicators of financial analysis with a focus on indicators, in whose construction are used items of statements that are significantly affected by the change of the methodological approach.

  6. Nuclear Fuel Leasing, Recycling and proliferation: Modeling a Global View

    International Nuclear Information System (INIS)

    Crozat, M P; Choi, J; Reis, V H; Hill, R

    2004-01-01

    On February 11, 2004, U.S. President George W. Bush, in a speech to the National Defense University stated: ''The world must create a safe, orderly system to field civilian nuclear plants without adding to the danger of weapons proliferation. The world's leading nuclear exporters should ensure that states have reliable access at reasonable cost to fuel for civilian reactors, so long as those states renounce enrichment and reprocessing. Enrichment and reprocessing are not necessary for nations seeking to harness nuclear energy for peaceful purposes.'' This concept would require nations to choose one of two paths for civilian nuclear development: those that only have reactors and those that contain one or more elements of the nuclear fuel cycle, including recycling. ''Fuel cycle'' states would enrich uranium, manufacture and lease fuel to ''reactor'' states and receive the reactor states' spent fuel. All parties would accede to stringent security and safeguard standards, embedded within a newly invigorated international regime. Reactor states would be relieved of the financial, environmental (and political) burden of enriching and manufacturing fuel and dealing with spent fuel. Fuel cycle states would potentially earn money on leasing the fuel and perhaps on sales of reactors to the reactor states. Such a leasing concept is especially interesting in scenarios which envision growth in nuclear power, and an important consideration for such a nuclear growth regime is the role of recycling of civilian spent fuel. Recycling holds promise for improved management of spent fuel and efficient utilization of resources, but continues to raise the specter of a world with uncontrolled nuclear weapons proliferation. If done effectively, a fuel-leasing concept could help create a political and economic foundation for significant growth of clean, carbon-free nuclear power while providing a mechanism for significant international cooperation to reduce proliferation concern. This

  7. 36 CFR 228.104 - Consideration of requests to modify, waive, or grant exceptions to lease stipulations.

    Science.gov (United States)

    2010-07-01

    ... Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE MINERALS Oil and Gas Resources Leasing § 228... led the Forest Service to require the inclusion of the stipulation in the lease can be met without...

  8. THE USE EFFICIENCY OF FINANCIAL LEASING FOR THE RENEWAL OF FIXED CAPITAL OF THE RAILWAY INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    V. I. Strilets

    2009-12-01

    Full Text Available In the article the dynamics of development and global structure of the leasing market are analyzed, the advantages of using the financial leasing for upgrading the fixed capital of railway industry are formulated.

  9. 77 FR 14832 - Plumchoice, Inc., Including On-Site Leased Workers From Balance Staffing, Insight Global Staffing...

    Science.gov (United States)

    2012-03-13

    ...., Including On-Site Leased Workers From Balance Staffing, Insight Global Staffing, and Technisource..., Insight Global Staffing, and Technisource, Scarborough, Maine. The workers are engaged in activities... leased workers from Balance Staffing, Insight Global Staffing, and Technisource, Scarborough, Maine, who...

  10. High-quality MOVPE butt-joint integration of InP/AlGaInAs/InGaAsP-based all-active optical components

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kadkhodazadeh, Shima; Kuznetsova, Nadezda

    2014-01-01

    In this paper, we demonstrate the applicability of MOVPE butt-joint regrowth for integration of all-active InP/AlGaAs/InGaAsP optical components and the realization of high-functionality compact photonic devices. Planar high-quality integration of semiconductor optical amplifiers of various epi...

  11. Wintercuring of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid in response to Xylella fastidiosa infections

    Science.gov (United States)

    Clonal replicates of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid P 63-61 were inoculated with Xylella fastidiosa strain M23 and evaluated for Almond Leaf Scorch Disease and subsequent wintercuring of infections during three growing seasons. Initial inoculations established gr...

  12. Recreational Use and Value of Water at Elephant Butte and Navajo Reservoirs. New Mexico State University Agricultural Experiment Station Bulletin 535.

    Science.gov (United States)

    Coppedge, Robert O.; Gray, James R.

    This document is a descriptive study of the recreational use and the value of water at Elephant Butte and Navajo Reservoirs. Previous research studies, as well as the study areas and recreational characteristics and procedures of investigation used in this study (sampling and data collection, data organization, analysis) are described. Discussions…

  13. Assessment of undiscovered oil and gas resources in the Uteland Butte Member of the Eocene Green River Formation, Uinta Basin, Utah

    Science.gov (United States)

    Johnson, Ronald C.; Birdwell, Justin E.; Mercier, Tracey J.; Brownfield, Michael E.; Charpentier, Ronald R.; Klett, Timothy R.; Leathers, Heidi M.; Schenk, Christopher J.; Tennyson, Marilyn E.

    2015-09-03

    Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean undiscovered resources of 214 million barrels of oil, 329 billion cubic feet of associated/dissolved natural gas, and 14 million barrels of natural gas liquids in the informal Uteland Butte member of the Green River Formation, Uinta Basin, Utah.

  14. Composite Sunrise Butte pluton: Insights into Jurassic–Cretaceous collisional tectonics and magmatism in the Blue Mountains Province, northeastern Oregon

    Science.gov (United States)

    Johnson, Kenneth H.; Schwartz, J.J.; Žák, Jiří; Verner, Krystof; Barnes, Calvin G.; Walton, Clay; Wooden, Joseph L.; Wright, James E.; Kistler, Ronald W.

    2015-01-01

    The composite Sunrise Butte pluton, in the central part of the Blue Mountains Province, northeastern Oregon, preserves a record of subduction-related magmatism, arc-arc collision, crustal thickening, and deep-crustal anatexis. The earliest phase of the pluton (Desolation Creek unit) was generated in a subduction zone environment, as the oceanic lithosphere between the Wallowa and Olds Ferry island arcs was consumed. Zircons from this unit yielded a 206Pb/238U age of 160.2 ± 2.1 Ma. A magmatic lull ensued during arc-arc collision, after which partial melting at the base of the thickened Wallowa arc crust produced siliceous magma that was emplaced into metasedimentary rocks and serpentinite of the overthrust forearc complex. This magma crystallized to form the bulk of the Sunrise Butte composite pluton (the Sunrise Butte unit; 145.8 ± 2.2 Ma). The heat necessary for crustal anatexis was supplied by coeval mantle-derived magma (the Onion Gulch unit; 147.9 ± 1.8 Ma).The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159–154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath–Sierra Nevada Provinces suggest that

  15. Finanční leasing z pohledu nájemce dle české legislativy a IFRS

    OpenAIRE

    Ťápalová, Hana

    2008-01-01

    The main goal of this bachelor's thesis is to create a comprehensive view of the problematics of the financial leasing from the leaseholder's point of view. The first part is focused on theoretical background of the financial leasing regulated by Czech legislation. It also describes financial leasing in light of accounting (evaluation and evidence, reporting leasing or advance payment) and taxes (corporation income tax, VAT and other ones). The second part is focused on International Financia...

  16. How to electrify more of the public to lease electric vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Huestis, E.P. [City of Vacaville, CA (United States)

    2000-07-01

    The City of Vacaville, in Northern California, aims to become the city which boast the highest number of electric vehicles per capita (residential) in both California and the United States. To that effect, it secured a $300,000 grant from the Congestion Mitigation and Air Quality Improvement Program in order to provide an incentive of $6,000 to 35 customers over the life of the three-year lease of a qualifying electric vehicle. Additional electric charging infrastructure throughout the Vacaville and the replacement of some aging City fleet vehicles with electric vehicles will be possible using the remainder of the grant money. The incentive program proved so popular, through word of mouth and positive press coverage, that 75 customers expressed an interest in the program. Several of the customers had just taken delivery of an electric vehicle from General Motors or Ford. Unable to provide the same incentive to all customers from the original grant, the City of Vacaville applied for a $600,000 additional grant from the Congestion Mitigation and Air Quality to serve 50 more customers, as well as for the provision of additional charging stations at strategic locations. The expansion of the program has received preliminary approval for its second grant application.

  17. 76 FR 19466 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable...

    Science.gov (United States)

    2011-04-07

    ... Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable Staffing, and Third Dimension Waverly, OH; Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network... Group including on-site leased workers from Reserves Network, Jackson, Ohio. The workers produce...

  18. 75 FR 20390 - Robert Bosch LLC, Including On-Site Leased Workers From Bosch Management Services North America...

    Science.gov (United States)

    2010-04-19

    ...-site leased workers of Bosch Management Services North America, South Haven Community Hospital... leased workers of Bosch Management Services North America, South Haven Community Hospital, Huffmaster Inc..., Including On-Site Leased Workers From Bosch Management Services North America, South Haven Community...

  19. 75 FR 55613 - Dupont Teijin Films Including On-Site Leased Workers From Schenkers Logistics, Inc., Florence, SC...

    Science.gov (United States)

    2010-09-13

    ... Including On-Site Leased Workers From Schenkers Logistics, Inc., Florence, SC; Amended Certification... Teijin Films, including on-site leased workers from Schenkers Logistics, Inc., Florence, South Carolina... leased workers of Schenkers Logistics, Inc., Florence, South Carolina, who became totally or partially...

  20. 41 CFR 102-73.170 - What types of special purpose space may the Department of Agriculture lease?

    Science.gov (United States)

    2010-07-01

    ... purpose space may the Department of Agriculture lease? 102-73.170 Section 102-73.170 Public Contracts and... § 102-73.170 What types of special purpose space may the Department of Agriculture lease? The Department of Agriculture is delegated the authority to lease the following types of special purpose space: (a...

  1. 41 CFR 102-72.30 - What are the different types of delegations related to real estate leasing?

    Science.gov (United States)

    2010-07-01

    ... types of delegations related to real estate leasing? 102-72.30 Section 102-72.30 Public Contracts and... REGULATION REAL PROPERTY 72-DELEGATION OF AUTHORITY Delegation of Authority § 102-72.30 What are the different types of delegations related to real estate leasing? Delegations related to real estate leasing...

  2. 76 FR 18778 - Notice of Proposed Reinstatement of Terminated Oil and Gas Leases MTM 89460, MTM 89461, MTM 89467...

    Science.gov (United States)

    2011-04-05

    ... that affect these lands. The lessee agrees to new lease terms for rentals and royalties of $10 per acre and 16\\2/3\\ percent. The lessee paid the $500 administration fee for the reinstatement of each lease... leases; The increased rental of $10 per acre; The increased royalty of 16\\2/3\\ percent; and The $163 cost...

  3. 75 FR 66795 - TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site...

    Science.gov (United States)

    2010-10-29

    ... follows: ``All workers TTM Technologies, including on-site leased workers from Kelly Services and Aerotek... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-64,993] TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site Leased Worker From Orbotech...

  4. 77 FR 21588 - Hart and Cooley, Inc., A Subsidiary of Tomkins, PLC Including On-Site Leased Workers from...

    Science.gov (United States)

    2012-04-10

    ... Subsidiary of Tomkins, PLC Including On- Site Leased Workers from Reliable, Masiello Employment Services..., applicable to workers of Hart and Cooley, Inc., a subsidiary of Tomkins, PLC, including on-site leased... workers. Based on these findings, the Department is amending this certification to include workers leased...

  5. 78 FR 8190 - Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore North Carolina...

    Science.gov (United States)

    2013-02-05

    ...] Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore North Carolina--Call for... Commercial Leasing for Wind Power Offshore North Carolina (Call), published on December 13, 2012 (77 FR 7204). DATES: BOEM must receive your nomination describing your interest in obtaining a commercial wind lease...

  6. 77 FR 47877 - Potential Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore Maine...

    Science.gov (United States)

    2012-08-10

    ... Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore Maine; Request for Interest... Request for a Commercial OCS Wind Lease, Request for Interest, and Request for Public Comment SUMMARY: The... (Statoil NA) to acquire an OCS wind lease; (2) solicit public input regarding the proposal, its potential...

  7. 76 FR 62452 - Avon Products, Inc. Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH...

    Science.gov (United States)

    2011-10-07

    .... Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH; Amended Certification Regarding... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

  8. 76 FR 62451 - Avon Products, Inc., Including On-Site Leased Workers From Spherion/Source Right, Springdale...

    Science.gov (United States)

    2011-10-07

    ...., Including On-Site Leased Workers From Spherion/Source Right, Springdale, Ohio; Amended Certification... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

  9. 77 FR 61028 - Hasbro, Inc.; Hasbro Managerial Services, Inc., Including On-Site Leased Workers of Entegee East...

    Science.gov (United States)

    2012-10-05

    ... relevant period and that the subject firm had sufficient control over the leased workers for the Department to determine that there was operational control of the leased workers by the subject firm. The... Managerial Services, Inc., Including On-Site Leased Workers of Entegee East Longmeadow, MA Amended...

  10. 30 CFR 210.205 - What reports must I submit to claim allowances on Indian coal leases?

    Science.gov (United States)

    2010-07-01

    ... on Indian coal leases? 210.205 Section 210.205 Mineral Resources MINERALS MANAGEMENT SERVICE... Minerals § 210.205 What reports must I submit to claim allowances on Indian coal leases? General. You must... coal leases: (1) Form MMS-4292, Coal Washing Allowance Report, to claim an allowance for the reasonable...

  11. Lease of agricultural land of the Treasury in the light of new regulations

    Directory of Open Access Journals (Sweden)

    Adam Majchrzak

    2012-04-01

    Full Text Available After 1992 lease was in Poland the primary form of land management of Treasury agricul-ture property. It was preferred by both the state because of the possibility of quick disposal of property and by farmers because of the need to involve the smaller one-off funding, which could be used instead for production and investment. In recent years the importance of leasing as a way of public land management has been decreasing in favour of the sale. It follows with the growing demand for agricultural land, as well as government policies and actions undertaken by the Agricultural Property Agency. This results in the new law regula-tions on public agricultural property management, which on 3 December 2011 introduced significant changes in the public land lease. The aim of new regulations is to accelerate the privatization of state land resources, which will be carried out in the first place by disabling part of the leased agricultural land from large-area farms, as well as for sale of the land, for which the lease will be ended. In this article the author tries to assess the impact of introduced regulations on the role of leasing of public agricultural land in Poland. It is expected that due to the new law, the lease will concern mainly small plots, while interest in the lease as a way to increase land resources by individual farmers will be reduced.

  12. 76 FR 46839 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease NDM 95192

    Science.gov (United States)

    2011-08-03

    ... and royalties of $10 per acre and 16\\2/3\\ percent. The lessees paid the $500 administration fee for... River Royalty Corporation timely filed a petition for reinstatement of competitive oil and gas lease NDM... original terms and conditions of the lease; The increased rental of $10 per acre; The increased royalty of...

  13. 78 FR 28642 - Eastman Kodak Company, Electrographic Print Solutions, Including On-Site Leased Workers From...

    Science.gov (United States)

    2013-05-15

    ... Kodak Company, Electrographic Print Solutions, Including On-Site Leased Workers From Adecco and Datrose, Spencerport, New York; Eastman Kodak Company, IPS, Including On-Site Leased Workers From Adecco, Dayton, Ohio... Trade Adjustment Assistance (TAA) filed on behalf of Eastman Kodak Company, Electrographic Print...

  14. 78 FR 19530 - Eastman Kodak Company (GCG), Electrographic Print Solutions, Including On-Site Leased Workers...

    Science.gov (United States)

    2013-04-01

    ... Kodak Company (GCG), Electrographic Print Solutions, Including On-Site Leased Workers From Adecco and Datrose, Spencerport, New York; Eastman Kodak Company, IPS, Including On-Site Leased Workers From Adecco..., 2011, applicable to workers of Eastman Kodak Company (GCG), Electrographic Print Solutions, including...

  15. 75 FR 43555 - Experian, Global Technology Services, a Subsidiary of Experian, Including a Leased Employee From...

    Science.gov (United States)

    2010-07-26

    ... Technology Services, a Subsidiary of Experian, Including a Leased Employee From Tapfin Working Off-Site in... Experian, Global Technology Services, a subsidiary of Experian, including on-site leased workers from... control of the Schaumburg, Illinois location of Experian, Global Technology Services, a subsidiary of...

  16. Federal offshore statistics: 1995 - leasing, exploration, production, and revenue as of December 31, 1995

    International Nuclear Information System (INIS)

    Gaechter, R.A.

    1997-01-01

    This report provides data on federal offshore operations for 1995. Information is included for leasing activities, development, petroleum and natural gas production, sales and royalties, revenue from federal offshore leasing, disbursement of federal revenues, reserves and resource estimates, and oil pollution in U.S. and international waters

  17. 75 FR 76487 - Haldex Brake Corporation, Commercial Vehicle Systems, Including On-Site Leased Workers of...

    Science.gov (United States)

    2010-12-08

    ..., Commercial Vehicle Systems, Including On-Site Leased Workers of Johnston Integration Technologies, a... Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (``Act''), 19 U.S.C... system components. The company reports that workers leased from Johnston Integration Technologies, a...

  18. 77 FR 72439 - Residential, Business, and Wind and Solar Resource Leases on Indian Land

    Science.gov (United States)

    2012-12-05

    ... to streamline and expedite the leasing process, advance economic development, and spur renewable... entities; however, many tribes requested clarification regarding other taxation arising in the context of... residential, business, and WSR leasing subparts to subpart A. This section now addresses not only taxation of...

  19. 78 FR 12358 - UBS Financial Services, Inc., Wealth Management Americas Operations, Including On-Site Leased...

    Science.gov (United States)

    2013-02-22

    ..., Inc., Wealth Management Americas Operations, Including On-Site Leased Workers From Leafstone... Services, Inc., Wealth Management Americas Operations (UBS), Weehawken, New Jersey. The workers are engaged... to include all leased workers on-site at UBS Financial Services, Inc., Wealth Management Americas...

  20. 76 FR 20367 - Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Off Delaware...

    Science.gov (United States)

    2011-04-12

    ... No. BOEM-2011-0008] Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Off... determination that no competitive interest exists in acquiring a commercial wind lease in the area offshore... a Request for Interest (RFI) in the Federal Register on April 26, 2010 (75 FR 21653). Bluewater Wind...

  1. 76 FR 14681 - Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore Massachusetts...

    Science.gov (United States)

    2011-03-17

    ... No. BOEM-2010-0063] Commercial Leasing for Wind Power on the Outer Continental Shelf (OCS) Offshore..., Regulation and Enforcement (BOEMRE), Interior. ACTION: Request for Interest (RFI) in Commercial Wind Energy... (BOEMRE) is reopening the comment period on the RFI in Commercial Wind Energy Leasing Offshore...

  2. 76 FR 2881 - Fishlake National Forest; Utah; Oil and Gas Leasing EIS

    Science.gov (United States)

    2011-01-18

    ... leasing, and to determine what lease stipulations would apply to those lands. The proposal also includes amending the FNF Land and Resource Management Plan (LRMP) to update management direction for minerals management, specifically oil and gas. The scope of the analysis is forest-wide. A Notice of Intent (NOI) was...

  3. 26 CFR 1.861-16 - Income from certain craft first leased after December 28, 1980.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Income from certain craft first leased after... the United States § 1.861-16 Income from certain craft first leased after December 28, 1980. (a) General rule. If a taxpayer— (1) Owns a qualified craft (as defined in paragraph (b) of this section). (2...

  4. 78 FR 52982 - Regal Beloit Corporation; Springfield, Missouri Division Including On-site Leased Workers From...

    Science.gov (United States)

    2013-08-27

    ... these workers were sufficiently under the control of the subject firm to be considered leased workers...; Springfield, Missouri Division Including On-site Leased Workers From Penmac Personnel Services and GCA Services Group Springfield, Missouri; Amended Certification Regarding Eligibility to Apply for Worker...

  5. 76 FR 175 - Faurecia Emissions Control Technologies Including On-Site Leased Workers From Adecco Employment...

    Science.gov (United States)

    2011-01-03

    ... Technologies Including On-Site Leased Workers From Adecco Employment Servcies and Emcon Technologies, Troy, MI..., applicable to workers of Faurecia Emissions Control Technologies, Troy, Michigan, including on-site leased workers from Adecco Employment Services, Troy, Michigan. The Department's notice of determination was...

  6. 75 FR 81637 - Commercial Lease for the Cape Wind Energy Project

    Science.gov (United States)

    2010-12-28

    ... Commercial Lease for the Cape Wind Energy Project AGENCY: Bureau of Ocean Energy Management, Regulation and... Renewable Energy Development on the Outer Continental Shelf (``OCS'') for the Cape Wind Energy Project... requirements of 30 CFR 285.231. The Lease is for the Cape Wind Energy Project (``Project'') which grants Cape...

  7. 30 CFR 285.510 - May MMS reduce or waive my lease or grant payments?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May MMS reduce or waive my lease or grant... Financial Assurance Requirements Payments § 285.510 May MMS reduce or waive my lease or grant payments? (a) The MMS Director may reduce or waive the rent or operating fee or components of the operating fee...

  8. 13 CFR 120.131 - Leasing part of new construction or existing building to another business.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Leasing part of new construction or existing building to another business. 120.131 Section 120.131 Business Credit and Assistance... § 120.131 Leasing part of new construction or existing building to another business. (a) If the SBA...

  9. The evaluation of new methodological approaches to lease reporting on the side of lessor

    Directory of Open Access Journals (Sweden)

    Hana Bohušová

    2013-01-01

    Full Text Available Since 2002 the International Accounting Standards Board (IASB and the Financial Accounting Standards Board (FASB has begun significantly cooperate in the development of standards based on the same principles. The cooperation is realised through a series of short term or long term projects. Revenue recognition and lease reporting projects represent priority areas of convergence. The development of methodological approaches for lease reporting on the side of lessee and lessor that would eliminate the main weaknesses of the current system of reporting based on the classification of lease contracts in connection with the lease term and the transfer of risks and benefits associated with the lease to the lessee should be the result of the convergence activity in the area of lease reporting. The evaluation of the impact of the newly proposed methodological approaches to lease reporting in the field of operating leases into the financial statements of lessor that will be affected by this change of methodology (financial position, comprehensive income statement is the main aim of the paper. The impact into selected indicators of financial analysis with a focus on indicators, in whose construction are used items of statements that are significantly affected by the change of the methodological approach is evaluated as well.

  10. 25 CFR 162.212 - When will the BIA advertise Indian land for agricultural leases?

    Science.gov (United States)

    2010-04-01

    ... laws and leasing policies that have been made applicable to the land under §§ 162.109 and 162.203 of..., unless a preference in favor of individual Indians is required by a superseding tribal law or leasing policy. (c) Advertisements will require sealed bids, and they may also provide for further competitive...

  11. The choice of leasing companies for automobile fleet updating on the basis of hierarchies analysis method

    OpenAIRE

    Dorohov, А.

    2007-01-01

    The basic criteria of leasing companies choice by the transport enterprises for automobile fleet updating such as terms of financing, size of advance, assortment time of existence at the market, have been determined. The determination of the best leasing company according to these parameters on the basis of hierarchies analysis method has been offered.

  12. 76 FR 42725 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease COC64399

    Science.gov (United States)

    2011-07-19

    ... (USA), for lands in Garfield County, Colorado. The petition was filed on time and was accompanied by...: Milada Krasilinec, BLM Land Law Examiner, Fluid Minerals Adjudication, at (303) 239-3767. Persons who use... requirements for reinstatement of the lease as set out in Section 31(d) and (e) of the Mineral Lands Leasing...

  13. 76 FR 35909 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease COC64168

    Science.gov (United States)

    2011-06-20

    ..., LTD, for lands in Gunnison County, Colorado. The petition was filed on time and was accompanied by all...: BLM, Milada Krasilinec, Land Law Examiner, Branch of Fluid Minerals Adjudication, at (303) 239-3767... requirements for reinstatement of the lease as set out in Section 31(d) and (e) of the Mineral Lands Leasing...

  14. 78 FR 19520 - Notice of Competitive Coal Lease Sale COC-74813, CO

    Science.gov (United States)

    2013-04-01

    ... Federal coal reserves (Red Wash Tracts 1 and 2) in Moffat and Rio Blanco Counties, Colorado, will be offered for competitive lease by sealed bid in accordance with the provisions of the Mineral Leasing Act... Fourth Floor Conference Room of the Bureau of Land Management (BLM) Colorado State Office, 2850...

  15. 77 FR 9696 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease COC30486

    Science.gov (United States)

    2012-02-17

    ... (USA) Inc., for lands in Mesa County, Colorado. The petition was filed on time and was accompanied by...: Milada Krasilinec, BLM Land Law Examiner, Fluid Minerals Adjudication, at (303) 239-3767. Persons who use... requirements for reinstatement of the lease as set out in Section 31(d) and (e) of the Mineral Lands Leasing...

  16. 77 FR 11155 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease COC73670

    Science.gov (United States)

    2012-02-24

    ... Inc., for lands in Huerfano County, Colorado. The petition was filed on time and was accompanied by...: Milada Krasilinec, BLM Land Law Examiner, Fluid Minerals Adjudication, at (303) 239-3767. Persons who use... requirements for reinstatement of the lease as set out in Section 31(d) and (e) of the Mineral Lands Leasing...

  17. 75 FR 53981 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 47609, California

    Science.gov (United States)

    2010-09-02

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CA-920-1310-FI; CACA 47609] Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 47609, California AGENCY: Bureau of Land... Management (BLM) received a petition for reinstatement of oil and gas lease CACA 47609 from Mirada Petroleum...

  18. 76 FR 22422 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 49187, California

    Science.gov (United States)

    2011-04-21

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CACA 49187, LLCA920000 L1310000 FI0000] Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 49187, California AGENCY: Bureau of... of Land Management (BLM) received a petition for reinstatement of oil and gas lease CACA 49187 from...

  19. 75 FR 38543 - Proposed Reinstatement of Terminated Oil and Gas Lease CACA 46594

    Science.gov (United States)

    2010-07-02

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management CA-920-1310-FI; CACA 46594] Proposed Reinstatement of Terminated Oil and Gas Lease CACA 46594 AGENCY: Bureau of Land Management, Interior. ACTION... for reinstatement of oil and gas lease CACA 46594 from Gasco Production Company. The petition was...

  20. 75 FR 32812 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 44900, California

    Science.gov (United States)

    2010-06-09

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CA-920-1310-FI; CACA 44900] Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 44900, California AGENCY: Bureau of Land... Management (BLM) received a petition for reinstatement of oil and gas lease CACA 44900 from NW. Lost Hills...

  1. 76 FR 66080 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 52030, California

    Science.gov (United States)

    2011-10-25

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CACA 52030, LLCA920000 L1310000 FI0000] Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 52030, California AGENCY: Bureau of... oil and gas lease CACA 52030 from Plains Exploration & Production Co. The petition was filed on time...

  2. 77 FR 9959 - Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 50123, California

    Science.gov (United States)

    2012-02-21

    ... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CACA 50123, LLCA920000 L1310000 FI0000] Notice of Proposed Reinstatement of Terminated Oil and Gas Lease CACA 50123, California AGENCY: Bureau of... of Land Management (BLM) received a petition for reinstatement of oil and gas lease CACA 50123 from...

  3. De invloed van IFRS 16 leases op de jaarrekening van lessees

    NARCIS (Netherlands)

    Arnold, Coen; Tahtah, Jay

    2017-01-01

    The article describes the outcome of a research (simulation) to the impact of new lease accounting rules to the 2016 financial statements of companies of the AEX- and AMX-index. In deze bijdrage wordt verslag gedaan van de verwachte gevolgen van IFRS 16 Leases voor lessees op de jaarrekening over

  4. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    International Nuclear Information System (INIS)

    Steinberg, Spencer M.; Buck, Brenda; Morton, Janice; Dorman, James

    2008-01-01

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as 129 I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I - , IO 3 - and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples

  5. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Spencer M. [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)], E-mail: spencer.steinberg@unlv.edu; Buck, Brenda; Morton, Janice [Department of Geoscience, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States); Dorman, James [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)

    2008-12-15

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as {sup 129}I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I{sup -}, IO{sub 3}{sup -} and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples.

  6. Influence of the phase morphology on the weldability of PLA/PBAT-blends by using butt-welding

    Science.gov (United States)

    Goebel, L.; Bonten, C.

    2014-05-01

    The material development in the field of bioplastics is steadily increasing. It is important to examine the processability but the Investigation of further process steps is also very important. In this paper the weldability of bioplastics is discussed. Compounds of Polylactide (PLA) and Polybutyleneadipate-terephthalate (PBAT) are produced by a twin screw extruder with different mixing ratios. Tensile specimens are produced by injection moulding and the tensile tests are carried out. In order to verify the weldability, some tensile specimens are cut in halfes and butt welded. Afterwards a tensile test is performed with the welded samples and the results are compared with the values of the unwelded samples. For understanding the results, the morphology of the welds were examined and correlated. It has been found that blends with a mixing ratio of 50:50 have the lowest welding factor, because of the immiscibility of PLA and PBAT. Weld images show segregated areas that reduce the force transmission.

  7. Numerical Simulation of Heat and Flow Behaviors in Butt-fusion Welding Process of HDPE Pipes with Curved Fusion Surface

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jae Hyun; Ahn, Kyung Hyun [Seoul National University, Seoul (Korea, Republic of); Choi, Sunwoong; Oh, Ju Seok [Hannam University, Daejeon (Korea, Republic of)

    2017-08-15

    Butt-fusion welding process is used to join the polymeric pipes. Recently, some researchers suggest the curved surface to enhance a welding quality. We investigated how curved welding surface affects heat and flow behaviors of polymer melt during the process in 2D axisymmetric domain with finite element method, and discussed the effect to the welding quality. In this study, we considered HDPE pipes. In heat soak stage, curved phase interface between the melt and solid is shown along the shape of welding surface. In jointing stage, squeezing flow is generated between curved welding surface and phase interface. The low shear rate in fusion domain reduces the alignment of polymer to the perpendicular direction of pipes, and then this phenomenon is expected to help to enhance the welding quality.

  8. Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels

    International Nuclear Information System (INIS)

    Moraitis, G.A.; Labeas, G.N.

    2009-01-01

    A two-level three-dimensional Finite Element (FE) model has been developed to predict keyhole formation and thermo-mechanical response during Laser Beam Welding (LBW) of steel and aluminium pressure vessel or pipe butt-joints. A very detailed and localized (level-1) non-linear three-dimensional transient thermal model is initially developed, which simulates the mechanisms of keyhole formation, calculates the temperature distribution in the local weld area and predicts the keyhole size and shape. Subsequently, using a laser beam heat source model based on keyhole assumptions, a global (level-2) thermo-mechanical analysis of the LBW butt-joint is performed, from which the joint residual stresses and distortions are calculated. All the major physical phenomena associated to LBW, such as laser heat input via radiation, heat losses through convection and radiation, as well as latent heat are accounted for in the numerical model. Material properties and particularly enthalpy, which is very important due to significant material phase changes, are introduced as temperature-dependent functions. The main advantages of the developed model are its efficiency, flexibility and applicability to a wide range of LBW problems (e.g. welding for pressure vessel or pipework construction, welding of automotive, marine or aircraft components, etc). The model efficiency arises from the two-scale approach applied. Minimal or no experimental data are required for the keyhole size and shape computation by the level-1 model, while the thermo-mechanical response calculation by the level-2 model requires only process and material data. Therefore, it becomes possible to efficiently apply the developed simulation model to different material types and varying welding parameters (i.e. welding speed, heat source power, joint geometry, etc.) in order to control residual stresses and distortions within the welded structure

  9. Assessment of Offshore Wind Energy Leasing Areas for the BOEM New Jersey Wind Energy Area

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W.; Elliott, D.; Fields, J.; Parker, Z.; Scott, G.; Draxl, C.

    2013-10-01

    The National Renewable Energy Laboratory (NREL), under an interagency agreement with the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM), is providing technical assistance to identify and delineate leasing areas for offshore wind energy development within the Atlantic Coast Wind Energy Areas (WEAs) established by BOEM. This report focuses on NREL's development and evaluation of the delineations for the New Jersey (NJ) WEA. The overarching objective of this study is to develop a logical process by which the New Jersey WEA can be subdivided into non-overlapping leasing areas for BOEM's use in developing an auction process in a renewable energy lease sale. NREL identified a selection of leasing areas and proposed delineation boundaries within the established NJ WEA. The primary output of the interagency agreement is this report, which documents the methodology, including key variables and assumptions, by which the leasing areas were identified and delineated.

  10. A Decision Optimization Model for Leased Manufacturing Equipment with Warranty under Forecasting Production/Maintenance Problem

    Directory of Open Access Journals (Sweden)

    Zied Hajej

    2015-01-01

    Full Text Available Due to the expensive production equipment, many manufacturers usually lease production equipment with a warranty period during a finite leasing horizon, rather than purchasing them. The lease contract contains the possibility of obtaining an extended warranty for a given additional cost. In this paper, based on the forecasting production/maintenance optimization problem, we develop a mathematical model to study the lease contract with basic and extended warranty based on win-win relationship between the lessee and the lessor. The influence of the production rates in the equipment degradation consequently on the total cost by each side during the finite leasing horizon is stated in order to determine a theoretical condition under which a compromise-pricing zone exists under different possibilities of maintenance policies.

  11. The Role and Importance of the Lease Towards the Farms’ Size Increase

    Directory of Open Access Journals (Sweden)

    Gabriel Popescu

    2007-01-01

    Full Text Available The lease reactivation, within the agrarian relations, at year 1994, was considered as a "normal economic phenomenon". The rent, as a price of the land lease, should equal gratify the interest of those two marketer partners, land owner and leaseholder. The estimations prove the restrictive character of the lease for owner of the land, not through the hectare's quantum, but through the total income size gained by the family, as a result of the farm low size, or of the plot of land gave to lease. The lease as a landed market's action has demonstrated its role within the agriculture farm size increase, merely through the restrictive manufactures factors character at the renters, which has substituted to the households.

  12. The Role and Importance of the Lease Towards the Farms’ Size Increase

    Directory of Open Access Journals (Sweden)

    Gabriel Popescu

    2007-01-01

    Full Text Available The lease reactivation, within the agrarian relations, at year 1994, was considered as a "normal economic phenomenon". The rent, as a price of the land lease, should equal gratify the interest of those two marketer partners, land owner and leaseholder. The estimations prove the restrictive character of the lease for owner of the land, not through the hectare’s quantum, but through the total income size gained by the family, as a result of the farm low size, or of the plot of land gave to lease. The lease as a landed market’s action has demonstrated its role within the agriculture farm size increase, merely through the restrictive manufactures factors character at the renters, which has substituted to the households.

  13. THE ANALYSIS OF THE BRAŞOV CONSUMER BEHAVIOR REGARDING THE USE OF THE LEASING SERVICES

    Directory of Open Access Journals (Sweden)

    OANA BĂRBULESCU (ŞEITAN

    2012-01-01

    Full Text Available The leasing market is in a constant diversification, the services provided within having the role, on the one hand, to stimulate the sales of high quality goods, and on the other hand, to reduce the flows of cheap and poor quality goods. Thus, if, initially, the use of leasing services had as a main purpose the acquisition of vehicles, now there is a growing demand for the financing of the equipment and buildings. Under the effect of the economic – financial crisis, the Romanian leasing market registered significant decreases across all customer segments. In this context, it appeared the necessity of drawing up some market researches in order to investigate the using behavior of the consumers of leasing services, their results could be using in the development and implementation of the marketing strategies adopted by the companies from the leasing sector.

  14. [Financing problems of capital goods: part 1: leasing as a solution?].

    Science.gov (United States)

    Clausen, C C; Bauer, M; Saleh, A; Picker, O

    2008-06-01

    The provision of financial support of hospitals by States for buying capital goods is becoming increasingly more limited. In order to still make investments, alternative forms of financing such as leasing must be considered in hospitals. However, the change from the classical form of dual financing and the decision to opt for a leasing model involves much more than just a question of costs. Leasing results in easily manageable expenditure, flexibility and adaptability for the choice of model but the leasing installments must be directly financed by the turnover from diagnosis-related groups and so lead to a reduction in the annual profit. In this article the authors try to give the reader an overview of the complex and sometimes counter-productive effect of financial instruments for investments in hospitals using leasing financing as an example. In the follow-up article the decision-making procedure using dynamic investment calculations will be demonstrated using a concrete example.

  15. Department of the Navy FY 1990/FY 1991 Biennial Budget Estimates. Military Construction and Family Housing Program FY 1990. Justification Data Submitted to Congress

    Science.gov (United States)

    1989-01-01

    properly configured for optimum space use, are inadequate, overcrowded, and cannot acca -modate all the children who need child care. Comeercial child... F6 -4 l’mestic Leasing Fiscal Year Summary: PY 1988 - The domestic leasing program consists of 1,324 units requiring funding of 09,551.0. runding in

  16. ASAS FREIES ERMESSEN DAN ASPEK PERPAJAKAN LEASING MENURUT KEPUTUSAN MENTERI KEUANGAN NO. 1169/KMK.01/1991 TENTANG KEGIATAN SEWA GUNA USAHA (LEASING

    Directory of Open Access Journals (Sweden)

    Syofrin Syofyan

    2017-06-01

    Full Text Available This article discusses the government’s role in granting tax incentives in support of the leasing business which in itself already functions as a financing instrument. The author purports to show how the government’s (the state administration’s freedom in making policy rules based on the principle of freies ermessen is realized in the economic (tax sector. The policy rules being discussed is the Ministry of Finance’ Decree no. 1169/KMK.01/1991 re. Leasing.

  17. Comparison of financial leasing according to the Czech accounting legislation and IAS/IFRS including taximplications

    Directory of Open Access Journals (Sweden)

    Jana Gláserová

    2010-01-01

    Full Text Available There is intensive effort of the harmonisation of accounting in the world. Primary sence of harmonisation is ensured that individual financial statements of all accounting units were comparable. Notwithstanding there are still significant differences in same areas. This contribution is aimed at define of posting and showing financial leasing according to Czech accounting legislation and international accounting standards IAS/IFRS, and determination of significant differences in these legislation.The leasing is one of the form of purchase of property. So International Accounting Standards require so that a tenant (leasee notices the subject of leasing in his assests and correlationally with obligation. After that the subject of leasing can be amortized. Argument for this way of billing is the fact, that the tenant (leasee obtaines economic gain from use of the subject of leasing during its essential economic lifetime. For it the tenant (leasee has to pay an amount that is about equal to real value and financial costs.The companies recording leasing according to czech legal form this fact do not record in accounting so value of their assests and obligations is lower than their actual (true value. This procedure dis­fi­gu­res financial indicators to be important for review of financial situation of company according to International accounting standardsBecause financial leasing is the most favourite form of leasing relation, the aim of this article is determination all changes in tax legislation to be related to financial leasing during three last years. And of course outline effect of these changes on the leasing market.

  18. Financing wind plants, taking leasing into special account

    International Nuclear Information System (INIS)

    Veltrup, M.

    1993-01-01

    Leasing cannot be managed without a special sort of external financing of wind power plants. Specifically for wind energy, it was found from an investigation of less than a year that an intended erection of a wind power plant should be carried out in the months of September or October, so that the autumn and winter months rich in energy can be used. For the erection of small wind power plants, it was found that taking advantage of the Investment Cost Grant is more sensible than the Operating Cost Grant. (orig./HW) [de

  19. Competitive Analysis for Online Leasing Problem with Compound Interest Rate

    Directory of Open Access Journals (Sweden)

    Xingyu Yang

    2011-01-01

    Full Text Available We introduce the compound interest rate into the continuous version of the online leasing problem and discuss the generalized model by competitive analysis. On the one hand, the optimal deterministic strategy and its competitive ratio are obtained; on the other hand, a nearly optimal randomized strategy is constructed and a lower bound for the randomized competitive ratios is proved by Yao's principle. With the help of numerical examples, the theoretical results show that the interest rate puts off the purchase date and diminishes the uncertainty involved in the decision making.

  20. LEASING SECTOR IN MACEDONIA-STATES AND TRENDS

    Directory of Open Access Journals (Sweden)

    DIANA BOSKOVSKA

    2011-01-01

    Full Text Available In conditions of limited access to traditional sources of funding when lending a privilege of the largest and most creditworthy companies, contemporary, alternative ways of funding, including the leasing are increasingly gaining importance. They are particularly attractive for small and medium enterprises that grow rapidly and are facing a shortage of funds. In terms of general illiquidity of the Macedonian economy, on the one hand, and restrictive credit policies of banks on the other hand, creating a business climate where will apply and promote alternative modes of financing in the Republic of Macedonia is a very importance for the operation and development of small and medium enterprises.

  1. El Leasing como herramienta de financiación

    OpenAIRE

    Chorén, María Cecilia

    2015-01-01

    El siguiente trabajo de investigación es planteado para ser utilizado por las Pymes para evaluar la oportunidad de aplicar el Leasing frente a una posibilidad de inversión en activos fijos; ya que hoy en día es tenido en cuenta en los países desarrollados como la herramienta de financiamiento más conveniente y perfecto que existe debido a sus amplios beneficios. Este trabajo tiene como objetivo primordial establecer las ventajas impositivas, jurídicas, financieras y operativas para que las...

  2. Application of the Analytic Hierarchy Process to Identify the Most Suitable Lessor of Freight Car Finance Leasing

    Directory of Open Access Journals (Sweden)

    Lei Lei

    2017-01-01

    Full Text Available Finance leasing (also “equipment leasing” saves the cost, improves the efficiency and benefit, larger the manufacture supply channels, which is an optimal solution for equipment supply with uncertain freight demand. The article collects the definitions of Finance Leasing based on the four pillars theory of finance leasing, also divides the lessors in Freight Car finance leasing into three categories according to their major business: manufacturers, banks as the representative financial institutions, firms that specialized in finance leasing. To identify the most suitable lessor for each railway department, an indicator system is built and operated by Yaahp (a software based on Analytic Hierarchy Process.

  3. Hydrology of coal-lease areas near Durango, Colorado

    Science.gov (United States)

    Brooks, Tom

    1985-01-01

    The U.S. Bureau of Land Management leases Federal lands and minerals for coal mining near Durango, Colorado. This report addresses the hydrologic suitability of those lands for coal leasing; the report describes the general hydrology of the Durango area and, more specifically, the hydrology of the Stollsteimer Creek study area 32 miles east of the Durango and the Hay Gulch study area, 12 miles southwest of Durango. The most productive aquifers in the Durango study area are Quaternary alluvium and the tertiary Animas Formation. Water wells completed in alluvium typically yield 5 to 20 gallons/min; wells completed is the Animas Formation yield as much as 50 gallons/min. Water quality in these aquifers is variable, but it generally is suitable for domestic use. The coal-bearing Cretaceous Fruitland and Menefee Formations are mined by surface methods at the Chimney Rock Mine in the Stollsteimer Creek study area and by underground methods at the National King Coal Mine in the Hay Gulch study area. Effects of surface mining in the Stollsteimer Creek area are: (1) Dewatering of an alluvial aquifer; and (2) Local degradation of alluvium water quality by spoil-pile effluent. Effects of underground mining in the Hay Gulch area are: (1) Introduction of water with greater dissolved-solids concentrations into the upper Hay Gulch alluvium from mine runoff; (2) Subsidence fracturing which could dewater streams and the alluvial aquifer. (USGS)

  4. CONDITIONS AND EFFECTS OF THE COMMISSORIA LEX IN THE LEASING CONTRACT

    Directory of Open Access Journals (Sweden)

    Raluca Tomescu

    2015-11-01

    Full Text Available The main problem with the execution of a leasing contract in Romania is that there are still shortcomings to the laws in force. The complexity of this contract which, at first sight, seems so commonplace, as well as the void in our ambiguous law are an inexhaustible source of research and exploration, but also the origin of controversial conflicts. With this paper I decided to elaborate I would like to contribute to consolidating the ”status” of national leasing operations, which are still in search of their own identity. Aiming to place the leasing contract back in its rightful place, that of a contract from which nobody has anything to lose but everything to gain, I consider it appropriate to analyse the conditions and effects of the commissoria lex fragments inserted in the leasing contract. One of the most controversial aspect of these last years brought to the attention of the courts of law cases where the financier, once the leasing contract was cancelled, requests the foreclosure of the user. The cancellation we are taking into account is based on the commissoria lex inserted in the clauses of the leasing contract. We have therefore to an alyse whether the foreclosure of the user can be carried on, based on the provisions of GO 51/1997 referring to leasing contracts.

  5. Cook Inlet Planning Area oil and gas lease sale 149: Final environmental impact statement. Volume 1

    International Nuclear Information System (INIS)

    1996-01-01

    This environmental impact statement (EIS) discusses a proposed oil and gas lease sale in the Cook Inlet Planning Area, analyzes its potential effects on the environment, describes alternatives, presents major issues determined through the scoping process and staff analyses, and evaluates potential mitigating measures. Descriptions of the (1) leasing and scoping process are given in Section 1, (2) alternatives and mitigating measures in Section 2, and (3) description of the environment in Section 3. The potential effects of the lease sale are analyzed in Section 4. Alternative 1, the proposed action, is based on offering for lease 402 blocks (approximately 0.8 million hectares--1.98 million acres) in lower Cook Inlet that range from about 5 to 50 kilometers (3 to 25 mi) offshore. Alterative 2 (No Lease Sale) would cancel the proposed lease sale tentatively scheduled for April 1996. Alternative 2 (Delay the Sale) would delay the proposed sale for 2 years. Alternatives 4, 5, 6, 7, 8, and 9 would defer from leasing areas adjacent to the lower Cook Inlet and northwestern Shelikof Strait: the size of areas deferred ranges from about 5 to 45% of the area proposed for Alternative 1. After a thorough review, the Secretary of the Interior will decide which alternative or combination of alternatives will be included in the Notice of Sale

  6. Assessment of Offshore Wind Energy Leasing Areas for the BOEM Massachusetts Wind Energy Area

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Parker, Z. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fields, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Scott, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Elliott, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Draxl, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-01

    The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), under an interagency agreement with the Bureau of Ocean Energy Management (BOEM), is providing technical assistance to identify and delineate leasing areas for offshore wind energy development within the Atlantic Coast Wind Energy Areas (WEAs) established by BOEM. This report focuses on NREL's development of three delineated leasing area options for the Massachusetts (MA) WEA and the technical evaluation of these leasing areas. The overarching objective of this study is to develop a logical process by which the MA WEA can be subdivided into non-overlapping leasing areas for BOEM's use in developing an auction process in a renewable energy lease sale. NREL worked with BOEM to identify an appropriate number of leasing areas and proposed three delineation alternatives within the MA WEA based on the boundaries announced in May 2012. A primary output of the interagency agreement is this report, which documents the methodology, including key variables and assumptions, by which the leasing areas were identified and delineated.

  7. Policy for equipment’s leasing period extension with minimum cost of maintenance

    Science.gov (United States)

    Lestari, C.; Kurniati, N.

    2018-04-01

    The cost structure for equipment investment including purchase cost and maintenance cost is getting more expensive. The company considers to lease the equipment instead of purchase it under a contractual agreement. Offering to extend the lease period, following to the base lease period, will provide more benefits for both the lessor (owner) and the lessee (user). Whenever the lease period extension offered at the beginning of the contract, there are some risks in finance e.g. uncertainty of the equipment performance and lessor responsibility. Therefore, this research attempts to model the optimal maintenance policy for lease period extension offered at the end of the contract. Minimal repair is performed to rectify a failed equipment, while imperfect preventive maintenance is conducted to improve the operational state of the equipment when reaches a certain control limit to avoid failures. The mathematical model is constructed to determine the optimal control limit, the number and degree of preventive maintenance, and the multiplication number of the lease period extension. Finally, numerical examples are given to illustrate the influences of the optimal length of the extended lease and the maintenance policy to minimize the maintenance cost.

  8. The influence of external factors on the credit risk in leasing industry

    Directory of Open Access Journals (Sweden)

    Gholamreza Farsad Amanollahi

    2016-03-01

    Full Text Available Credit risk consists of probability of non-return, which may be in the form of bankruptcy or a decrease in financial and credit situation of the lessee. The variables are extracted from the Central Bank. In this study the independent variables are measured with six factors that are called external factors. The external factors are size of leasing, ownership interest rate, foreign exchange, inflation, and Gross Domestic Product (GDP. The present study uses related observations from 31 leasing companies from 2008 to 2013 to find out the determinants of the credit risk. The combined evidences suggest that internal factors such as upfront prepayment, credit insurance contract, security deposits, time and period contract, collateral and guarantees, contract amount, as well as external factors such as interest rate, inflation, foreign exchange, Gross Domestic Product infrastructure, and credit risk are determinants in the policy-making process involving the industrial leasing. Furthermore, the empirical results indicate the size of leasing and ownership are not the significant determinants of credit risk. The results of this dissertation provide several implications for policy-makers in the leasing industry. Policy-makers will be better off employing different procedures for leasing activities in the leasing industry.

  9. A forum on LPG vehicles and leasing; Un forum sur les vehicules GPL et la LLD

    Energy Technology Data Exchange (ETDEWEB)

    Fridman, G.

    1999-04-01

    As a specialist of vehicle leasing, Axus France cooperated with Arthur Andersen, Butagaz and Volvo to promote the LPG solution to managers. Axus France offers with LPG vehicles leasing a range of tailor made products and services. Thus, the company estimates that LPG economics applied through vehicle leasing are not sufficiently large from Diesel (its calculation gives only 2 %) on some utilizations. This is why Axus offers an extra incitement to its customers, by keeping the financial risk linked to the LPG vehicle resale. (authors)

  10. Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

    Science.gov (United States)

    Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

    1994-09-01

    Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

  11. Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion with Validation from Mechanical Testing

    International Nuclear Information System (INIS)

    Anderson, Michael T.; Cinson, Anthony D.; Crawford, Susan L.; Doctor, Steven R.; Moran, Traci L.; Watts, Michael W.

    2010-01-01

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the U.S. Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12-in. IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer-diameter weld beads were removed for the microwave inspection. In two of the four pipes, both the outer and inner weld beads were removed and the pipe joints re-evaluated. The pipes were sectioned and the joints destructively evaluated with the side-bend test by cutting portions of the fusion joint into slices that were planed and bent. The last step in this limited study will be to correlate the fusion parameters, nondestructive, and destructive evaluation results to validate the effectiveness of what each NDE technology detects and what each does not detect. The results of the correlation will be used in identifying any future work that is needed.

  12. The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods

    International Nuclear Information System (INIS)

    Li, Bo; Shen, Yifu; Hu, Weiye

    2011-01-01

    Research highlights: → Friction stir weld-defect forming mechanisms of thick butt-joints. → Relationship between weld-defects and friction stir welding process parameters. → Multiple non-destructive testing methods applied to friction stir welds. → Empirical criterion basing on mass-conservation for inner material-loss defects. → Nonlinear correlation between weld strengths and root-flaw lengths. -- Abstract: The present study focused on the relationship between primary friction stir welding process parameters and varied types of weld-defect discovered in aluminum 2219-T6 friction stir butt-welds of thick plates, meanwhile, the weld-defect forming mechanisms were investigated. Besides a series of optical metallographic examinations for friction stir butt welds, multiple non-destructive testing methods including X-ray detection, ultrasonic C-scan testing, ultrasonic phased array inspection and fluorescent penetrating fluid inspection were successfully used aiming to examine the shapes and existence locations of different weld-defects. In addition, precipitated Al 2 Cu phase coarsening particles were found around a 'kissing-bond' defect within the weld stirred nugget zone by means of scanning electron microscope and energy dispersive X-ray analysis. On the basis of volume conservation law in material plastic deformation, a simple empirical criterion for estimating the existence of inner material-loss defects was proposed. Defect-free butt joints were obtained after process optimization of friction stir welding for aluminum 2219-T6 plates in 17-20 mm thickness. Process experiments proved that besides of tool rotation speed and travel speed, more other appropriate process parameter variables played important roles at the formation of high-quality friction stir welds, such as tool-shoulder target depth, spindle tilt angle, and fixture clamping conditions on the work-pieces. Furthermore, the nonlinear correlation between weld tensile strengths and weld crack

  13. Jointly Production and Correlated Maintenance Optimization for Parallel Leased Machines

    Directory of Open Access Journals (Sweden)

    Tarek ASKRI

    2017-04-01

    Full Text Available This paper deals with a preventive maintenance strategy optimization correlated to production for a manufacturing system made by several parallel machines under lease contract. In order to minimize the total cost of production and maintenance by reducing the production system interruptions due to maintenance activities, a correlated group preventive maintenance policy is developed using the gravity center approach (GCA. The aim of this study is to determine an economical production plan and an optimal group preventive maintenance interval Tn at which all machines are maintained simultaneously. An analytical correlation between failure rate of machines and production level is considered and the impact of the preventive maintenance policy on the production plan is studied. Finally, the proposed maintenance policy GPM is compared with an individual simple strategy approach IPM in order to illustrate its efficiency.

  14. Western Gulf of Mexico lease sale draws weak response

    International Nuclear Information System (INIS)

    Koen, A.D.

    1992-01-01

    This paper reports that puny participation in the federal lease sale for the western Gulf of Mexico reflected a lack of open acreage on attractive prospects and the crisis sweeping the U.S. offshore oil and gas industry. Thirty-eight companies participating in the Minerals Management Service's Outer Continental Shelf Sale 141 offered 81 bids for 61 tracts in the western gulf planning area. That was the fewest bids offered in a western gulf sale since operators offered 52 bids for 41 tracts at Sale 105 in August 1986. The only Gulf of Mexico minerals sale to attract less bonus money was the MMS sulfur and salt sale in the central gulf in February 1988 in which $20.8 million was exposed

  15. Entomological reconnaissance of Syncrude Lease No. 17 and its environs

    Energy Technology Data Exchange (ETDEWEB)

    Porter, W.B.; Lousier, J.D.

    1975-01-01

    In 1974, a three week field reconnaissance study of terrestrial insects occurring on Syncrude Lease No. 17 and its environs, in the Athabasca Tar Sands of Northern Alberta, was carried out. Various sampling methods were employed in disturbed and undisturbed stands of different boreal forest tree types and in an area cleared of trees for mining purposes. The results obtained suggest that further study of certain insects may give an early indication of possible environmental damage. These insects are a dung beetle, Aphodius sp. (Scarabaeidae : Coleoptera), two species of March flies (Bibionidae : Diptera) and several species of ground beetles (Carabidae : Coleoptera). A future sampling plan can be based on the quantitative (soil sampling) data.

  16. 25 CFR 162.231 - How can the land be used under an agricultural lease?

    Science.gov (United States)

    2010-04-01

    ... with recognized principles of sustained yield management, integrated resource management planning, sound conservation practices, and other community goals as expressed in applicable tribal laws, leasing policies, or agricultural resource management plans. Appropriate stipulations or conservation plans must be...

  17. QUALITATIVE MARKETING RESEARCH REGARDING THE IMPACT OF THE CRISIS ON THE ACTIVITY OF THE LEASING COMPANIES

    Directory of Open Access Journals (Sweden)

    CRISTINA BĂLTEANU

    2012-01-01

    Full Text Available The financial crisis has caused the economic system both direct and indirect effects. Negative macroeconomic shocks have had a direct impact on the results of leasing companies, and effects such as panic and "nervous breakdown" also had major repercussions. The purpose of this paper based on a qualitative marketing research is knowing, on the one hand, the effects of the crisis on the consumption of leasing products/services and, on the other hand, the factors that caused these effects. The study also aimed to outline the possible evolution of the leasing services offers over the next three years, taking in consideration the measures taken by leasing companies in order to restart the financing process through this system.

  18. FEASIBILITY OF CHOICE THE EVALUATION FINANCE LEASE METHOD AND ITS ALTERNATIVE ONES

    Directory of Open Access Journals (Sweden)

    O. M. Lukianova

    2010-09-01

    Full Text Available In the article a classification of techniques of estimation of economic efficiency of leasing, where the rule of modeling a currency flow is taken as a criterion, is presented; their advantages and demerits are demonstrated.

  19. 76 FR 2144 - Quest Diagnostics, Inc. Information Technology Help Desk Services Including On-Site Leased...

    Science.gov (United States)

    2011-01-12

    .... Information Technology Help Desk Services Including On-Site Leased Workers From Modis, West Norriton, PA..., applicable to workers of Quest Diagnostics, Inc., Information Technology Help Desk Services, West Norriton... Quest Diagnostics, Inc., Information Technology Help Desk [[Page 2145

  20. 75 FR 49526 - Halliburton Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel...

    Science.gov (United States)

    2010-08-13

    ... Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel, Clayton Personnel Service, and Manpower Planning, Duncan, OK; Halliburton Company, Technology and Engineering Division, Finance... Halliburton Company, Technology and Engineering Division, and Finance and Administration Division, Duncan...

  1. The influence of micro economic factors on the default risk of leasing industry

    Directory of Open Access Journals (Sweden)

    Gholamreza Farsad Amanollahi

    2016-01-01

    Full Text Available The aim of this study is to establish a framework for measuring and managing credit risk for fifteen leasing companies in Iran. An analysis on the influence of internal factors on credit performance will then be performed. This will enable a leasing industry to progress towards its goals and objectives in the most direct and effective way. Credit risk consists of probability of non-return. This may be in the form of bankruptcy or a decrease in financial and credit situation of the lessee. We can assume a correlated market and credit risk. The variables are extracted from the Central Bank of Kanoon Leasing Association in Iran. Numerical analysis reveals that lessee credit risk can have a substantial impact on a lease term structure.

  2. 78 FR 27859 - Residential, Business, and Wind and Solar Resource Leases on Indian Land

    Science.gov (United States)

    2013-05-13

    ... agricultural leases, failed to specifically redesignate the section numbers of sections being moved to subpart... notice makes a minor correction to redesignate section numbers for sections that were moved to a new...

  3. A CBO PAPER: The Budgetary Treatment of Leases and Public/Private Ventures

    National Research Council Canada - National Science Library

    Clay-Mendex, Deborah

    2003-01-01

    Federal agencies sometimes use long-term leases and special-purpose public/private ventures to acquire capital assets without having to obtain Congressional appropriations for the full costs up front...

  4. 75 FR 76040 - Weyerhaeuser Company Corporate Headquarters Including On-Site Leased Workers From Volt Services...

    Science.gov (United States)

    2010-12-07

    ... Assistance on June 2, 2010, applicable to workers of Weyerhaeuser Company, Corporate Headquarters, including... Weyerhaeuser Company, Corporate Headquarters to be considered leased workers. Based on these findings, the... the Federal Way, Washington location of Weyerhaeuser Company, Corporate Headquarters. The amended...

  5. 75 FR 3250 - Glaxosmithkline, Including On-Site Temporary and Leased Workers From Kelly Services, Kelly...

    Science.gov (United States)

    2010-01-20

    ... subject firm. The workers are engaged in the production of penicillin-based antibiotics for humans and animals. The company reports that on-site leased workers from Dream Clean, Inc. were employed on-site at...

  6. O lizingovom finansirovanii tranzitnogo sektora = Lease financing of the transit sector / Marina Vijar

    Index Scriptorium Estoniae

    Vijar, Marina

    2003-01-01

    Ülevaade 2002. aasta novembris Hansapanga Grupi, Hansa Capital Grupi ja Euroopa Rekonstruktsiooni- ja Arengupanga (EBRD) poolt Venemaal asutatud ettevõtte Hansa Leasing Russia tegevusest transiitkaubandusettevõtete finantseerimisel

  7. Opções reais na análise de contratos de leasing

    OpenAIRE

    Martinez,Antonio Lopo

    1998-01-01

    Este artigo procura incorporar a precificação de opções à análise tradicional do contrato de leasing. Após uma breve revisão dos conceitos básicos sobre opções, questionam-se os critérios tradicionais de análise de investimentos, propondo a utilização de opções reais como um instrumento para aprimorar a avaliação de contratos de leasing. O contrato de leasing operacional é avaliado incorporado a opções e observam-se diversos direitos oferecidos nos contratos de leasing que podem assumir o pap...

  8. Rent pricing decision support mathematical model for finance leases under effective risks

    Directory of Open Access Journals (Sweden)

    Rabbani Masoud

    2015-01-01

    Full Text Available Nowadays, leasing has become an increasingly important and popular method for equipment acquisition. But, because of the rent pricing difficulties and some risks that affect the lessor and lessee's decision making, there are many people that still tend to buy equipment instead of lease it. In this paper we explore how risk can affect the leasing issue support mathematical model. For this purpose, we consider three types of risk; Credit risk, Transaction risk and Risk based pricing. In particular, our focus was on how to make decision about rent pricing in a leasing problem with different customers, various quality levels and different pricing methods. Finally, the mathematical model has been solved by Genetic Algorithm that is a search heuristic to optimize the problem. This algorithm was coded in MATLAB® R2012a to provide the best set of results.

  9. Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint

    Directory of Open Access Journals (Sweden)

    Sare Celik

    2016-05-01

    Full Text Available Friction Stir Welding (FSW is a solid-state welding process used for welding similar and dissimilar materials. FSW is especially suitable to join sheet Al alloys, and this technique allows different material couples to be welded continuously. In this study, 1050 Al alloys and commercially pure Cu were produced at three different tool rotation speeds (630, 1330, 2440 rpm and three different tool traverse speeds (20, 30, 50 mm/min with four different tool position (0, 1, 1.5, 2 mm by friction stir welding. The influence of the welding parameters on the microstructure and mechanical properties of the joints was investigated. Tensile and bending tests and microhardness measurements were used to determine the mechanical properties. The microstructures of the weld zone were investigated by optical microscope and scanning electron microscope (SEM and were analyzed in an energy dispersed spectrometer (EDS. Intermetallic phases were detected based on the X-ray diffraction (XRD analysis results that evaluated the formation of phases in the weld zone. When the welding performance of the friction stir welded butt joints was evaluated, the maximum value obtained was 89.55% with a 1330 rpm tool rotational speed, 20 mm/min traverse speed and a 1 mm tool position configuration. The higher tensile strength is attributed to the dispersion strengthening of the fine Cu particles distributed over the Al material in the stir zone region.

  10. Study of Defect Sizing in Carbon Steel Butt Welds using Conventional Ultrasonic Technique and Phased Array Ultrasonic

    International Nuclear Information System (INIS)

    Amry Amin Abas; Noorhazleena Azaman; Mohd Yusnisyam Mohd Yusoff

    2016-01-01

    Ultrasonic testing is a proven reliable method which is able to detect and measure the size of defects in butt welds with acceptable tolerance. Recent advancement of technology has introduced a computerized technique which is phased array. Phased array employs focal law that enable focusing and steering of beam at the active aperture axis. This enables one line scanning but covering the whole weld volume as compared to conventional technique which employs aster scan and multiple probes to completely cover the whole weld volume. Phased array also gives multiple data view which assist the interpreter. This paper is about the study of these two techniques and technical analysis of comparison between the two. The conventional technique is performed using GE USM GO with 4 MHz 45 degrees shear wave probe. The phased array technique uses OLYMPUS OMNISCAN MX2 with 5L64 linear array probe with 16 elements aperture and 55 degrees wedge emitting shear wave into the specimen. Sensitivity of both techniques are based on 1.5 mm Side Drilled Hole. The results are compared and analysis such as defect sizing and defect type determination are performed. (author)

  11. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hun; Kim, Jae-Woong [Yeungnam Univ., Gyeongsan (Korea, Republic of)

    2017-04-15

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  12. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    International Nuclear Information System (INIS)

    Jung, Sung Hun; Kim, Jae-Woong

    2017-01-01

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  13. Comparison of Corner-Butt 45 (Cb-45 and Corner-Lap (Cl joints in friction stir welding

    Directory of Open Access Journals (Sweden)

    Setiawan Widia

    2018-01-01

    Full Text Available The 10 mm thick Aluminum 6061 plates have been corner joined using varied design and those were 45° Corner Butt and Corner Lap Joints (CB-45 & CL. Friction tool was hardened EMS 45. True experimental method was used with independent parameters is feed rate which varied at 10 mm/min, 15 mm/min and 30 mm/min respectively. Other parameter such as rotating speed was kept constant. Experiment results show that, CB-45 yields better properties than CL. The tensile strength of CB-45 reaches 163.7 MPa for 10 mm/min feed rate. Whilst CL produces joint with tensile strength equal 120 MPa for equal parameters. Microstructure observation showed that CB-45 produces fine and homogenous appearance of MgO compared to CL. This phenomenon is caused by the pin of CB-45 joint which fully penetrates the nugget zone which is not found in CL design. This microstructure in turn promotes higher tensile strength of CB-45.

  14. PERSONAL SALES FACTORS AND THEIR QUANTIFICATION ON THE EXAMPLE OF A B-H LEASING COMPANY

    OpenAIRE

    Sasa Vujic; Slobodan Vujic; Mesud Ajanovic

    2013-01-01

    The paper is aimed at analyzing and quantifying personal sales elements in order to increase the volume of leasing service sales and achieve higher quality in satisfying customers’ needs. In their service sales, leasing companies typically use the personal sales method. Its basic characteristic is personal contact between the sales representative and the customer. Personal sales is to a lesser degree quantifi ed through quantitative elements of plan fulfi llment; however, all the other qualit...

  15. Federal Offshore Statistics, 1993. Leasing, exploration, production, and revenue as of December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Francois, D.K.

    1994-12-31

    This document contains statistical data on the following: federal offshore lands; offshore leasing activity and status; offshore development activity; offshore production of crude oil and natural gas; federal offshore oil and natural gas sales volume and royalties; revenue from federal offshore leases; disbursement of federal offshore revenue; reserves and resource estimates of offshore oil and natural gas; oil pollution in US and international waters; and international activities and marine minerals. A glossary is included.

  16. Noble Gas Isotope Evidence for Mantle Volatiles in the Cu-Mo Porphyry and Main Stage Polymetallic Veins at Butte, Montana

    Science.gov (United States)

    Hofstra, A. H.; Rusk, B. G.; Manning, A. H.; Hunt, A. G.; Landis, G. P.

    2017-12-01

    Recent studies suggest that volatiles released from mafic intrusions may be important sources of heat, sulfur, and metals in porphyry Cu-Mo-Au and epithermal Au-Ag deposits associated with intermediate to silicic stocks. The huge Cu-Mo porphyry and Main Stage polymetallic vein deposits at Butte are well suited to test this hypothesis because there is no geologic or isotopic evidence of basaltic intrusions in the mine or drill holes. The Butte porphyry-vein system is associated with quartz monzonite stocks and dikes within the southwest part of the Late Cretaceous Boulder batholith. The Boulder batholith was emplaced into Mesoproterozoic to Mesozoic sedimentary rocks and Late Cretaceous volcanic rocks. The Boulder batholith and Butte intrusions have Sri and eNd values indicative of crustal contamination. Eu and Ce anomalies in zircon from Butte intrusions provide evidence of oxidation due to magma degassing. To ascertain the source of volatiles in this system, 11 samples from the Cu-Mo porphyry and 16 from Main Stage veins were selected. The isotopic composition of Ar, Ne, and He extracted from fluid inclusions in quartz, magnetite, pyrite, chalcopyrite, sphalerite, galena, enargite, and covellite were determined. Helium isotopes exceed blank levels in all samples and Ne and Ar in some samples. On a 38Ar/36Ar vs. 40Ar/36Ar diagram, data plot near air. On a 20Ne/22Ne vs. 21Ne/22Ne diagram, data extend from air along the trajectories of OIB and MORB. On a 36Ar/4He vs. 3He/4He RA diagram, data extend from crust toward the air-mantle mixing line. The maximum 3He/4He RA values in the Cu-Mo porphyry (2.86) and Main Stage veins (3.46) are from pyrite and these values correspond to 36 and 43 % mantle helium. The Ne and He results show that fluid inclusions contain volatiles discharged from mantle magmas and that these volatiles were diluted by groundwater containing He derived from country rocks. Despite the lack of mafic intrusions in the Butte magmatic center, noble gas

  17. Specific Features of Reflection of Information Regarding Lease Operations in the National and International Standards

    Directory of Open Access Journals (Sweden)

    Nikolenko Nataliya V.

    2013-12-01

    Full Text Available The article identifies the degree of correspondence of the national Provisions (Standard of Business Accounting (PSBA Lease with the international standard and provides recommendations with respect to their closing up. On the results of the study the author provides specific features of international and national standards – the existing IFRS 17 Lease and national PSBA 14 Lease by the following components: definition of lease, its classification and reflection in accounting. Also the text of PSBA 31 Financial Expenditures is supplemented with provisions on capitalisation of financial expenditures prospectively, which would allow avoidance of correction of the balance of the retained income and provision of comparative information for previous periods. The article provides an algorithm of division of lease for accounting purposes on the basis of international standards. Its use would ensure correctness of reflection of lease operations in accounting and would serve as a basis for development of methodical provisions with respect to accounting. By the result of the study the author forms definition of the qualification asset as an asset which requires considerable time for its creation, preparation for target use, sales or acquisition of the ownership right. Capitalisation of such expenditures would allow non-reduction of the accounting income and also would provide a possibility to reflect financial expenditures in accordance with their economic essence.

  18. Fatique Resistant, Energy Efficient Welding Program, Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Egland, Keith; Ludewig, Howard

    2006-05-25

    The program scope was to affect the heat input and the resultant weld bead geometry by synchronizing robotic weave cycles with desired pulsed waveform shapes to develop process parameters relationships and optimized pulsed gas metal arc welding processes for welding fatique-critical structures of steel, high strength steel, and aluminum. Quality would be addressed by developing intelligent methods of weld measurement that accurately predict weld bead geometry from process information. This program was severely underfunded, and eventually terminated. The scope was redirected to investigate tandem narrow groove welding of steel butt joints during the one year of partial funding. A torch was designed and configured to perform a design of experiments of steel butt weld joints that validated the feasability of the process. An initial cost model estimated a 60% cost savings over conventional groove welding by eliminating the joint preparation and reducing the weld volume needed.

  19. 75 FR 6874 - Outer Continental Shelf (OCS) Central Planning Area (CPA) Gulf of Mexico (GOM) Oil and Gas Lease...

    Science.gov (United States)

    2010-02-12

    ... for blocks in water depths of 400 meters to less than 1,600 meters. Blocks in 400 to less than 800... resulting from this lease sale. Leases in water depths of 400 meters to less than 800 meters will be offered... still may require the full 10-year term. In both the 400-800 and 800-1,600 meter cases, the lease...

  20. Programming

    International Nuclear Information System (INIS)

    Jackson, M.A.

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

  1. Programming

    OpenAIRE

    Jackson, M A

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, thi...

  2. Análise e avaliação do contrato de leasing : uma abordagem financeira

    OpenAIRE

    Martinez, Antonio Lopo

    2010-01-01

    Efetua uma análise dos contrataos de "Leasing" caracterizando-os e apontando vantagens e desvantagens. Revista a literatura no campo da avaliação de contratos de "Leasing". Trata também da análise do contrato de "Leasing" dentro do contexto específico da realidade brasileira. Aponta a direção para análises mais completas da "Leasing" por meio da incorporação dos modelos de preficação

  3. Basic numerical study on gap influence of residual stress and distortion during high-brightness laser butt welding

    International Nuclear Information System (INIS)

    Serizawa, Hisashi; Mori, Daiki; Murakawa, Hidekazu

    2013-01-01

    High-brightness laser such as fiber laser or disk laser is expected to minimize the total heat input energy in welding due to its high beam quality, and the welding residual stress and distortion also seem to be reduced as a result. However, the diameter of high-brightness laser beam is less than 0.6 mm and it is difficult to set the beam position to contact face between two parts because in general there would be a gap due to quality of parts. In this study, in order to reveal the effect of gap on the residual stress and the welding distortion during fiber laser welding, the butt welding of two plates were examined through the thermal elastic-plastic analysis with a new gap element. From the result of thermal analyses, it was found that the homogeneous ellipsoid body could be applicable to model the shape of heat source for the fiber laser and the gap width would not influence the penetration shape when the gap width was changed from 0.1 to 0.25 mm. In addition, the elastic-plastic analyses indicated that the transverse shrinkage slightly increased with increasing the gap width, while this shrinkage without gap was much smaller than that with gap. Also, it was revealed that the welding speed largely affects both the welding residual stress and distortion. Moreover, it was found that the residual stress was almost independent of the jig position, while the position of fixtures slightly affected the transverse shrinkage. (author)

  4. Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint

    Science.gov (United States)

    Gou, Ning-Nian; Zhang, Jian-Xun; Wang, Jian-Long; Bi, Zong-Yue

    2017-04-01

    The explosively welded 2205 duplex stainless steel/X65 pipe steel bimetallic sheets were butt jointed by multilayer and multi-pass welding (gas tungsten arc welding for the flyer and gas metal arc welding for the transition and parent layers of the bimetallic sheets). The microstructure and mechanical properties of the welded joint were investigated. The results showed that in the thickness direction, microstructure and mechanical properties of the welded joint exhibited obvious inhomogeneity. The microstructures of parent filler layers consisted of acicular ferrite, widmanstatten ferrite, and a small amount of blocky ferrite. The microstructure of the transition layer and flyer layer consisted of both austenite and ferrite structures; however, the transition layer of weld had a higher volume fraction of austenite. The results of the microhardness test showed that in both weld metal (WM) and heat-affected zone (HAZ) of the parent filler layers, the average hardness decreased with the increasing (from parent filler layer 1 to parent filler layer 3) welding heat input. The results of hardness test also indicated that the hardness of the WM and the HAZ for the flyer and transition layers was equivalent. The tensile test combined with Digital Specklegram Processing Technology demonstrated that the fracturing of the welded joint started at the HAZ of the flyer, and then the fracture grew toward the base metal of the parent flyer near the parent HAZ. The stratified impact test at -5 °C showed that the WM and HAZ of the flyer exhibited lower impact toughness, and the fracture mode was ductile and brittle mixed fracture.

  5. 30 CFR 285.435 - How can I relinquish a lease or a grant or parts of a lease or grant?

    Science.gov (United States)

    2010-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER... relinquishment application with MMS. A relinquishment takes effect on the date we approve your application... obligations under the lease or grant. (b) Your relinquishment application must include: (1) Name; (2) Contact...

  6. PROJECT LIFE CYCLE OF LEASING MARINE VESSEL OWNERS AND CHARTERERS

    Directory of Open Access Journals (Sweden)

    Алла Витальевна БОНДАРЬ

    2016-03-01

    Full Text Available Based on the study of the basic types of the bareboat charter, presented algorithms decision on the justification of the respective projects. It was found that the initiator of the project can be both owners who wants to pass the boat rental and the charterer, and also who is the owner, who wants to take a boat for rent. It is proved that the implementation of these specific operations requires careful preparation, and using of the project approach will greatly enhance their effectiveness. We describe the life of the project finance lease from the standpoint of the marine vessel, the ship-owner and charterer. It is established that such projects characterized by four-phase structure of the life cycle: preparation, let's call it as the principal decision on (from the chartering of the vessel, the investment - to select the optimal variant (from the charter and the conclusion of the bareboat charter, the phase of operation of the vessel and the fourth - the closure of the project at the end of term bareboat charter. Skill description of the content of each phase, which will continue for the main participants of the project to determine the value of each phase and the value of the whole project.

  7. Wildlife inventory of oil sand leases 12, 13 and 34

    International Nuclear Information System (INIS)

    Skinner, D.L.

    1996-01-01

    Results of a preliminary study to assess wildlife abundance and distribution on Syncrude's proposed oil sand leases 12, 13 and 34 were presented. The objective of the study was to determine the relative abundance and habitat preferences of different wildlife species. Aerial and track count surveys were conducted in winter. The abundance of hooved animals was determined using an aerial survey of the entire Syncrude area which is composed of conifer-dominated lowlands. Results of the surveys showed that wildlife abundance in the study area was typical of the Fort McMurray region. Thirteen habitat types were identified, including 2 types of upland deciduous forest, mixed wood forest, 4 types of coniferous forest, 2 types of wetland community, 3 types of riparian community and cleared peatland. The distribution of mammals in the study area was presented. This included distribution of hooved animals, small herbivores, large carnivores, small carnivores, and other furbearers. The habitat utilization of each wildlife species was discussed. Several habitat types were preferred by at least one species. Very few species were associated with deciduous and mixed wood forest. It was noted that winter track counts may not be indicative of habitat preferences and distribution during other important periods such as breeding and natal seasons. 69 refs., 12 tabs., 13 figs

  8. The future of nursing: how important is discipline-specific knowledge? A conversation with Jacqueline Fawcett. Interview by Dr. Janie Butts and Dr. Karen Rich.

    Science.gov (United States)

    Fawcett, Jacqueline

    2012-04-01

    Nurses have long attempted to secure a unique identity for the profession. Many scholars are now promoting an interdisciplinary framework for nursing practice. Fawcett is convinced that interdisciplinary practice poses a danger for nursing to lose its identity and that interdisciplinary practice cannot be successful if members of each discipline do not understand the conceptual models, practice, and research of their own discipline. Dr. Janie Butts and Dr. Karen Rich interviewed Dr. Jacqueline Fawcett about her views related to discipline-specific knowledge and nursing's future. The authors conclude that Fawcett's scientific foundation gives nursing the solidarity and power necessary to determine the unique internal goods of its practice.

  9. USE OF IMPORT REVOLVING LEVERAGE LEASING IN ORDER TO MINIMIZE RISKS IN THE ORGANIZATION OF PRODUCTION

    Directory of Open Access Journals (Sweden)

    Olga Sergeevna Muftahova

    2015-11-01

    Full Text Available In the article the financing form in case of import revolving leverage leasing is described to modernize of fixed assets.In the research process the methods of mathematical modeling are applied.The mathematical model of the generalized method of calculation leasing payments proposed by the authors is represented according to the results of the research.The presented method includes several forms of leasing utilized both in the domestic and in the foreign practice.The novelty of this method consists in the fact that on the basis of the proposed forms of leasing is calculated the sum of leasing payment, which considers with the calculation insu-rance, financial and currency component to minimize losses from downtime due to the limited using of basic production assets of the enterprise in the organization of the production process.The method presented by authors is intended to minimize the risk of downtime of production equipment. This fact will enable us to provide high qualitative and quantitative indicators of the enterprise, stability and continuity of the production process.

  10. Business Models for Circular Economy and Sustainable Development: the Case of Lease Transactions

    Directory of Open Access Journals (Sweden)

    Ion Ionașcu

    2018-05-01

    Full Text Available The purpose of this paper is to discuss the features of leasing as a business model in the circular economy, which is presumed to support sustainable development by product recirculation and driving economic performance. In particular, this study highlights microeconomic benefits for listed Romanian companies, showing that adopting a "greener" business model, as in the case of leasing, does not penalize firms economically but it is a catalyst for increasing their performance, both in terms of accountancy-based measures (return on assets and return on sales, but also in terms of the subjective perceptions of investors and financial analysts operating on the capital market (proxied by Tobin’s Q and market to book value of equity. Based on 266 observations from companies listed on the Bucharest Stock Exchange (BSE during 2013-2016, the study uses regression analysis to show that financial performance is higher for quoted Romanian companies that use leasing and renting and that performance is also directly associated with leasing intensity, i.e. the share of the value of the rights to use leased goods in the total value of property, plant and equipment.

  11. Právní, daňový a účetní pohled na leasing v ČR

    OpenAIRE

    Kulhánková, Hana

    2009-01-01

    This thesis deals with leasing, its division, legal, tax and accountig framework of leasing in the Czech Republic. Accounting and tax part focuses on obligations of a leasholder and a lessor. One part is dedicated to lease market in the Czech Republic and on part deals with IFRS.

  12. 75 FR 76038 - Zach System Corporation a Subdivision of Zambon Company, SPA Including On-Site Leased Workers of...

    Science.gov (United States)

    2010-12-07

    ... Subdivision of Zambon Company, SPA Including On-Site Leased Workers of Turner Industries and Go Johnson, La..., including on-site leased workers from Turner Industries and Go Johnson, La Porte, Texas. The Department's... investigation revealed that Zach System Corporation is a subdivision of Zambon Company, SPA, not Zach System SPA...

  13. 76 FR 16447 - ETHICON, a Subsidiary of Johnson & Johnson Including On-Site Leased Workers From Kelly Temporary...

    Science.gov (United States)

    2011-03-23

    ... workers of ETHICON, A Johnson and Johnson Company, San Angelo, Texas, separated from employment on or... Johnson & Johnson Including On-Site Leased Workers From Kelly Temporary Services, San Angelo, TX; Amended... of ETHICON, a subsidiary of Johnson & Johnson, including on-site leased workers from Kelly Temporary...

  14. 13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... standard for leasing of Government land for uranium mining? A concern is small for this purpose if it...

  15. 76 FR 30956 - Outer Continental Shelf, Alaska OCS Region, Chukchi Sea Planning Area, Oil and Gas Lease Sale 193

    Science.gov (United States)

    2011-05-27

    ... Point Hope et al., v. Salazar, No. 1:08-cv-00004-RRB (D. Alaska)]. The sale was conducted in February... Continental Shelf, Alaska OCS Region, Chukchi Sea Planning Area, Oil and Gas Lease Sale 193 AGENCY: Bureau of...: BOEMRE announces the availability of a Revised Draft SEIS, OCS Oil and Gas Lease Sale 193, Chukchi Sea...

  16. 76 FR 27366 - CEVA Freight, LLC, Dell Logistics Division, Including On-Site Leased Workers From Prologistix...

    Science.gov (United States)

    2011-05-11

    ... Logistics Division, Including On-Site Leased Workers From Prologistix, Including Workers Whose Unemployment..., applicable to workers of CEVA Freight, LLC, Dell Logistics Division, including on-site leased workers from... workers employed at CEVA Freight, LLC, Dell Logistics Division, Winston-Salem, North Carolina who were...

  17. 75 FR 11921 - Heritage Aviation, Ltd., Including On-Site Leased Workers From Global Technical Services and...

    Science.gov (United States)

    2010-03-12

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,924] Heritage Aviation, Ltd., Including On-Site Leased Workers From Global Technical Services and Global, Inc. (Global Employment... from Heritage Aviation, Ltd, including on-site leased workers from Global Technical Services, Grand...

  18. 30 CFR 250.181 - When may the Secretary cancel my lease and when am I compensated for cancellation?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When may the Secretary cancel my lease and when... may the Secretary cancel my lease and when am I compensated for cancellation? If the Secretary cancels.... Section 250.185 states conditions under which you will receive no compensation. The Secretary may cancel a...

  19. 25 CFR 215.23a - Suspension of operations and production on leases for minerals other than oil and gas.

    Science.gov (United States)

    2010-04-01

    ... minerals other than oil and gas. 215.23a Section 215.23a Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.23a Suspension of operations and production on leases for minerals other than oil and gas. The provisions of...

  20. 12 CFR 714.9 - Are indirect leasing arrangements subject to the purchase of eligible obligation limit set forth...

    Science.gov (United States)

    2010-01-01

    ... the purchase of eligible obligation limit set forth in § 701.23 of this chapter? 714.9 Section 714.9....9 Are indirect leasing arrangements subject to the purchase of eligible obligation limit set forth... underwriting decision and that the lease contract is assigned to you very soon after it is signed by the member...