TLP Structural Health Monitoring Based on Vibration Signal of Energy Harvesting System

Directory of Open Access Journals (Sweden)

Vahid Jahangiri

Full Text Available Abstract Structural Health Monitoring (SHM of Tension Leg Platform (TLP is very crucial for preventing catastrophic and sudden collapse of the structures. One of the methods of monitoring these structures is implementing SHM sensors. Supplying energy for these sensors for a long period is a challenging problem. So, one of the new methods of supplying energy for SHM, is usage of mechanical energy. In this method, the piezoelectric material is employed to convert the mechanical energy which is resulted from vibration of structure, to electrical energy. The advantage of this method is based on not implementing the battery charging system. Therefore, in this paper, after modeling TLP structure, energy supplying of these sensors with piezoelectric converters is studied. Furthermore, fault diagnosis of these structures in the presence of different uncertainties is proposed by the features of voltage signal, produced from piezoelectric patches and fuzzy classification method. Results show that this method can diagnose faults of the structure with an acceptable success rate.

Learning Activity Package, Algebra.

Science.gov (United States)

Evans, Diane

A set of ten teacher-prepared Learning Activity Packages (LAPs) in beginning algebra and nine in intermediate algebra, these units cover sets, properties of operations, number systems, open expressions, solution sets of equations and inequalities in one and two variables, exponents, factoring and polynomials, relations and functions, radicals,…

Lessons learned during Type A Packaging testing

International Nuclear Information System (INIS)

O'Brien, J.H.; Kelly, D.L.

1995-11-01

For the past 6 years, the US Department of Energy (DOE) Office of Facility Safety Analysis (EH-32) has contracted Westinghouse Hanford Company (WHC) to conduct compliance testing on DOE Type A packagings. The packagings are tested for compliance with the U.S. Department of Transportation (DOT) Specification 7A, general packaging, Type A requirements. The DOE has shared the Type A packaging information throughout the nuclear materials transportation community. During testing, there have been recurring areas of packaging design that resulted in testing delays and/or initial failure. The lessons learned during the testing are considered a valuable resource. DOE requested that WHC share this resource. By sharing what is and can be encountered during packaging testing, individuals will hopefully avoid past mistakes

An online clinical governance learning package for student radiographers

International Nuclear Information System (INIS)

Messer, Simon; Griffiths, Marc

2007-01-01

Purpose: Clinical governance is a key element of the Government's plan for reform in the National Health Service. As such, it is an essential element for final year undergraduate radiography studies. With Ciris becoming a standard web-based solution for clinical governance within the NHS, a need has been identified for it to be introduced at university to undergraduate radiographers. Methods: A distance learning package for Ciris has therefore been developed that was trialed by third year radiography students whilst on their final clinical placement. The package includes a specifically designed online virtual hospital which the students engaged with interactively using a workbook. The students undertook detailed individual and group exercises aimed at delivering practical experience of the Ciris program and its role in clinical governance. Results: The package was evaluated by the students in terms of their experiential learning and their perceived learning needs for clinical governance. Technical and support issues associated with the delivery of this package online were identified. Conclusion: The combination of a distance online learning environment, supported by a workbook, is an effective method of engaging students and is beneficial in terms of helping achieve learning outcomes in clinical governance for final year radiography studies

A Framework for the Flexible Content Packaging of Learning Objects and Learning Designs

Science.gov (United States)

Lukasiak, Jason; Agostinho, Shirley; Burnett, Ian; Drury, Gerrard; Goodes, Jason; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper presents a platform-independent method for packaging learning objects and learning designs. The method, entitled a Smart Learning Design Framework, is based on the MPEG-21 standard, and uses IEEE Learning Object Metadata (LOM) to provide bibliographic, technical, and pedagogical descriptors for the retrieval and description of learning…

Development of an e-learning package for sepsis care.

Science.gov (United States)

Davis, Anna; Henderson, James; Langmack, Gill

Severe sepsis is a major cause of morbidity and mortality in the UK. This article describes the collaborative development and implementation of an interactive online learning package to understand the key role nurses have in recognising and then starting to apply the Sepsis Six care bundle in clinical practice. The e-learning package, developed in a UK teaching hospital, uses a case study approach to address the knowledge that is required to be able to recognise sepsis, to understand the processes that occur and the ongoing care and treatment required. The package is relevant to final-year student nurses, newly registered nurses in preceptorship and other health professionals involved in assessing and treating patients who may be developing sepsis.

Grooming. Instructor's Packet. Learning Activity Package.

Science.gov (United States)

Stark, Pamela

This instructor's packet accompanies the learning activity package (LAP) on grooming. Contents included in the packet are a time sheet, suggested uses for the LAP, an instruction sheet, final LAP reviews, a final LAP review answer key, suggested activities, an additional resources list, and student completion cards to issue to students as an…

Transient effects of tendon disconnection on the survivability of a TLP in moderate-strength hurricane conditions

Directory of Open Access Journals (Sweden)

Moo Hyun Kim

2009-09-01

Full Text Available The primary objective of this paper is to investigate the dynamic stability and survivability of a four-column classic TLP (tension-leg platform under less-than-extreme storm conditions where one or more tendons have been lost due to damage or disconnect. The transient responses of the platform and tendon tensions at the moment of disconnection are particularly underscored. The numerical simulation is based on the BE-FE hybrid hull-tendon-riser coupled dynamic analysis in time domain. Compared to the common industry practice of checking the system without a failed tendon in the beginning, the maximum tension on the neighboring tendon can be significantly increased at the moment of disconnection due to the snap-like transient effects, which can lead to unexpected failure of the total system. It is also found that the transient effects can be reduced with the presence of TTRs (top-tensioned risers with pneumatic tensioners. It is also seen that the TLP cannot survive in the 100-yr hurricane condition after losing one tendon.

Oral Hygiene. Instructor's Packet. Learning Activity Package.

Science.gov (United States)

Hime, Kirsten

This instructor's packet accompanies the learning activity package (LAP) on oral hygiene. Contents included in the packet are a time sheet, suggested uses for the LAP, an instruction sheet, final LAP reviews, a final LAP review answer key, suggested activities, additional resources (student handouts), student performance checklists for both…

Approaches to Learning and Student Acceptance of Self-Study Packages.

Science.gov (United States)

Jones, Alice; Kember, David

1994-01-01

Examines the attitudes of physiotherapy students toward the replacement of conventional lectures with self-learning packages at the Hong Kong Polytechnic. Highlights include learning processes; a comparison of physiotherapy students with other students; and correlations between evaluation questions and English language fluency. (Contains 10…

Lessons learned related to packaging and transportation

International Nuclear Information System (INIS)

Wallen, C.

1995-01-01

The use of lessons learned as a tool for learning from past experiences is well established, especially by many organizations within the nuclear industry. Every person has, at some time, used the principles of lessons learned to adopt good work practices based on their own experiences or the experiences of others. Lessons learned can also help to avoid the recurrence of adverse practices, which is often an area that most lessons-learned programs tend to focus on. This paper will discuss how lessons learned relate to packaging and transportation issues and events experienced at Department of Energy (DOE) facilities. It will also discuss the role performed by the Office of Nuclear and Facility Safety's Office of Operating Experience Analysis and Feedback in disseminating lessons learned and operating experience feedback to the DOE complex. The central concept of lessons learned is that any organization should be able to learn from its own experiences and events. In addition, organizations should implement methodologies to scan external environments for lessons learned, to analyze and determine the relevance of lessons learned, and to bring about the necessary changes learned from these experiences. With increased concerns toward facility safety, the importance of utilizing the lessons-learned principles and the establishment of lessons-learned programs can not be overstated

BDgraph: An R Package for Bayesian Structure Learning in Graphical Models

NARCIS (Netherlands)

Mohammadi, A.; Wit, E.C.

2017-01-01

Graphical models provide powerful tools to uncover complicated patterns in multivariate data and are commonly used in Bayesian statistics and machine learning. In this paper, we introduce an R package BDgraph which performs Bayesian structure learning for general undirected graphical models with

The Micro TIPS - Cases - Programmed Learning Course Package.

Science.gov (United States)

Heriot-Watt Univ., Edinburgh (Scotland). Esmee Fairbairn Economics Research Centre.

Part of an economic education series, the course package is designed to teach basic concepts and principles of microeconomics and how they can be applied to various world problems. For use with college students, learning is gained through lectures, tutorials, textbooks, programmed text, cases, and TIPS (Teaching Information Processing System).…

Toward a Generative Model of the Teaching-Learning Process.

Science.gov (United States)

McMullen, David W.

Until the rise of cognitive psychology, models of the teaching-learning process (TLP) stressed external rather than internal variables. Models remained general descriptions until control theory introduced explicit system analyses. Cybernetic models emphasize feedback and adaptivity but give little attention to creativity. Research on artificial…

Learning Activity Package, Algebra 93-94, LAPs 12-22.

Science.gov (United States)

Evans, Diane

A set of 11 teacher-prepared Learning Activity Packages (LAPs) in beginning algebra, these units cover sets, properties of operations, operations over real numbers, open expressions, solution sets of equations and inequalities, equations and inequalities with two variables, solution sets of equations with two variables, exponents, factoring and…

The MOBO City: A Mobile Game Package for Technical Language Learning

Directory of Open Access Journals (Sweden)

Faranak Fotouhi-Ghazvini

2009-04-01

Full Text Available In this research we produced a mobile language learning game that is designed within a technical context. After conceptual analysis of the subject matter i.e. computer’s motherboard, the game was designed. The action within the game is consistent to the theme. There is a story, simplifying and exaggerating real life. Elements of control, feedback and sense of danger are incorporated into our game. By producing an engaging learning experience, vocabularies were learned incidentally. Deliberate vocabulary learning games were also added to our package to help students solve their common errors.

Understanding Insurance. A Guide for Industrial Cooperative Training Programs. Learning Activity Package No. 15.

Science.gov (United States)

Duenk, Lester G.; Tuel, Charles

This learning activity package (LAP) on the insurance industry and the methods used to give protection to the insured is designed for student self-study. Following a list of learning objectives, the LAP contains a pretest (answer key provided at the back). Six learning activities follow. The learning activities cover the following material: terms…

Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni–Si–B ternary filler alloy

Energy Technology Data Exchange (ETDEWEB)

Pouranvari, M., E-mail: mpouranvari@yahoo.com [Department of Materials Science and Engineering, Sharif University of Technology, Tehran 11365-11155 (Iran, Islamic Republic of); Ekrami, A.; Kokabi, A.H. [Department of Materials Science and Engineering, Sharif University of Technology, Tehran 11365-11155 (Iran, Islamic Republic of)

2013-06-25

Highlights: ► Microstructure evolution during TLP bonding of IN718 using Ni–Si–B filler. ► Athermal solidification path is influenced by severe segregation of B and Si in residual liquid. ► High hardness of ASZ microconstituents necessitates designing a PBHT to avert brittleness. ► Diffusion induced Cr–Mo–Nb based boride precipitation was observed in DAZ. ► Boride precipitates in DAZ influence the corrosion resistance and aging behavior. -- Abstract: This paper addresses solidification and solid state precipitation phenomena during transient liquid phase (TLP) bonding of wrought IN718 nickel base superalloy using Ni–4.5Si–3.2B (wt.%) ternary filler alloy. The solidification sequence of the residual liquid in the joint centerline was found to be (1) formation of proeutectic γ, followed by (2) γ/Ni{sub 3}B eutectic reaction, followed by (3) ternary eutectic of γ/Ni{sub 3}B/Ni{sub 6}Si{sub 2}B. Extensive fine Ni{sub 3}Si formed within the eutectic-γ via solid state precipitation during cooling. Extensive Cr–Mo–Nb rich boride precipitates were formed in the substrate region due to boron diffusion into the base metal during bonding process. The implications of the phase transformations on the mechanical properties, corrosion resistance and aging behavior of the joint, which are pertinent to the development of an optimum post bond heat treatment, are highlighted.

Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni–Si–B ternary filler alloy

International Nuclear Information System (INIS)

Pouranvari, M.; Ekrami, A.; Kokabi, A.H.

2013-01-01

Highlights: ► Microstructure evolution during TLP bonding of IN718 using Ni–Si–B filler. ► Athermal solidification path is influenced by severe segregation of B and Si in residual liquid. ► High hardness of ASZ microconstituents necessitates designing a PBHT to avert brittleness. ► Diffusion induced Cr–Mo–Nb based boride precipitation was observed in DAZ. ► Boride precipitates in DAZ influence the corrosion resistance and aging behavior. -- Abstract: This paper addresses solidification and solid state precipitation phenomena during transient liquid phase (TLP) bonding of wrought IN718 nickel base superalloy using Ni–4.5Si–3.2B (wt.%) ternary filler alloy. The solidification sequence of the residual liquid in the joint centerline was found to be (1) formation of proeutectic γ, followed by (2) γ/Ni 3 B eutectic reaction, followed by (3) ternary eutectic of γ/Ni 3 B/Ni 6 Si 2 B. Extensive fine Ni 3 Si formed within the eutectic-γ via solid state precipitation during cooling. Extensive Cr–Mo–Nb rich boride precipitates were formed in the substrate region due to boron diffusion into the base metal during bonding process. The implications of the phase transformations on the mechanical properties, corrosion resistance and aging behavior of the joint, which are pertinent to the development of an optimum post bond heat treatment, are highlighted

OpenML : An R package to connect to the machine learning platform OpenML

NARCIS (Netherlands)

Casalicchio, G.; Bossek, J.; Lang, M.; Kirchhoff, D.; Kerschke, P.; Hofner, B.; Seibold, H.; Vanschoren, J.; Bischl, B.

2017-01-01

OpenML is an online machine learning platform where researchers can easily share data, machine learning tasks and experiments as well as organize them online to work and collaborate more efficiently. In this paper, we present an R package to interface with the OpenML platform and illustrate its

Learning Activity Package, Physics 124, (LAP) Studies 45, 47, and 48.

Science.gov (United States)

Holland, Bill

Included are three Learning Activity Packages (LAP) studies for use in high school physics instruction: Time and Measurement Function; Force, Work, and Momentum; and Momentum, Work, and Energy. Each LAP contains a rationale for teaching the material included, student objectives (stated in behavioral terms), a list of resources (readings, problems,…

Learning Activity Package, Physical Science. LAP Numbers 1, 2, 3, and 4.

Science.gov (United States)

Williams, G. J.

These four units of the Learning Activity Packages (LAPs) for individualized instruction in physical science cover measuring techniques, operations of instruments, metric system heat, matter, energy, elements, atomic numbers, isotopes, molecules, mixtures, compounds, physical and chemical properties, liquids, solids, and gases. Each unit contains…

Learning Activity Package, Physical Science. LAP Numbers 8, 9, 10, and 11.

Science.gov (United States)

Williams, G. J.

These four units of the Learning Activity Packages (LAPs) for individualized instruction in physical science cover nuclear reactions, alpha and beta particles, atomic radiation, medical use of nuclear energy, fission, fusion, simple machines, Newton's laws of motion, electricity, currents, electromagnetism, Oersted's experiment, sound, light,…

3D-image theater system using TLP770J LCD data projector; Ekisho data projector wo mochiita rittai eizo theater system

Energy Technology Data Exchange (ETDEWEB)

Kawasato, H. [Toshiba Corp., Tokyo (Japan)

2000-02-01

In today's multimedia era, visual systems are widely used not only for two-dimensional images but also for the depiction of virtual reality and for simulated three-dimensional images. At the same time, the projection technology used in large-screen projectors is shifting from the cathode ray tube (CRT) to the liquid crystal display (LCD). Toshiba has developed a simplified 3D-image theater system using the TLP770J LCD data projector, which offers easy maintenance and lower costs. (author)

Owning and Operating a Small Business. A Guide for Industrial Cooperative Training Programs. Learning Activity Package No. 14.

Science.gov (United States)

Braden, Robert P.; Remzi, Kerim

This learning activity package (LAP) on starting a small business is designed for student self-study. It will help students learn about their aptitudes and abilities as well as about the basics of running a small business. Following a list of learning objectives, the LAP contains a pretest (answer key provided at the end of the LAP). Ten learning…

ANALISIS KUALITAS PENGELOLAAN GEDUNG TERHADAP KEPUASAN PELANGGAN MENGGUNAKAN METODE SERVQUAL DAN MODEL KANO (STUDI KASUS : PT.TLP DI GEDUNG TCC

Directory of Open Access Journals (Sweden)

Razul harfi

2017-10-01

Full Text Available PT. TLP is a company which employs the service area and  the task is  to preserve the TCC building and to fulfill the needs of its users through providing complete facilities and service. But have the customers satisfied with the facilities and services? Therefore, the aim of this research is to measure  the level of customer satisfaction, to determine which service attributes are prioritized for improvements, and the efforts to the improvement. The method used is servqual methods and models of canoes. The servqual method is intended to determine the level of customer satisfaction, while the canoe models is for finding out the preferred  improvement services. The result of servqual analysis shows that there is a gap of all attributes and the scores are negative. These means that the quality of customer service  of PT.TLP is not satisfactory. The average percentage for the customer's perception is 75.25% and 88.10% for expectations. Moreover,  the canoe analysis also shows that out of 32 service attributes, there are 25 attributes that should be corrected, namely 3 services are categorized Attractive, 5 service category One-dimensional, and 17 services are categorized ‘Must be’. Having  integrated the servqual with canoes model, it is obtained that there is a sorting of  the improvements priority, then determined improvements suggestion to evaluation for the company, such as setting the lobby and courtyard regularly, implementing the service with heart, socializing the call center, having the training  regularly, making the  data collection and the disposition  of the vehicle, also  testing of fire protection and alarm regularly

Developing, implementing and evaluating a simulation learning package on post-partum haemorrhage for undergraduate midwifery students in KwaZulu-Natal*

Directory of Open Access Journals (Sweden)

Hafaza B. Amod

2017-10-01

Full Text Available Background: The training of undergraduate midwifery students to identify and manage post-partum haemorrhage, is an essential skill in midwifery. Aim: The aim of this study was to develop, implement and evaluate a simulation learning package (SLP on post-partum haemorrhage for undergraduate midwifery students using high fidelity simulation without risks to real-life patients. Methods: An exploratory sequential mixed methodology was used in this study. The study was made up of three phases namely; the development, implementation and evaluation of the learning package. The research participants were fourth year baccalaureate of nursing midwifery students and midwifery experts involved in teaching midwifery. Data was collected using an evaluation checklist for experts, a student satisfaction survey and focus group sessions. Quantitative data were analysed using SPSS Version 23.0 and the qualitative data was analysed using content analysis as described by Graneheim and Lundman(2004. Results: The evaluation checklist for experts revealed that the developed SLP was considered suitable for undergraduate students. It encouraged active learning, teamwork and accommodated diverse learning styles. The package was easy to use and offered opportunities for student feedback. The student satisfaction survey revealed that the pre-simulation support received was adequate and helpful, and the post simulation outcomes showed that using high fidelity simulation improved clinical skills, knowledge, critical thinking, self-confidence and satisfaction. The focus group sessions revealed that the SLP was an innovative and interactive method of learning; it improved the student's perception of their clinical competence, stimulated critical thinking and increased self-confidence. Conclusion: A simulation learning package, that uses high fidelity simulation, can be an innovative and interactive method to teach midwifery emergencies.

Maldives. Package on population education for special interest groups developed.

Science.gov (United States)

1995-01-01

The Population Education Program of the Non-Formal Education Center has developed a package of Population Education for Special Interest Groups comprising a learning package and fieldworker's guide. The learning package is especially developed for teaching population education for out-of-school populations. Special interest groups in Maldives include newly married couples, adolescents, and working youth. Produced under the guidance of UNESCO, Bangkok, the package contains 36 different materials such as posters, charts, leaflets, booklets, stories, and illustrated booklets which may be taught in 36 to 45 periods. The materials deal with eight themes, namely, family size and family welfare, population and resources, delayed marriage and parenthood, responsible parenthood, population-related values and beliefs, women in development, AIDS/STD, and respect for old people. Accompanying the learning package is the fieldworker's guide used to teach the package. It contains individual guides for each of the 36 learning materials. The guide gives the titles of the materials, format, objectives of the materials, messages, target groups, and an overview of the content of each learning materials. The methodologies used for teaching the learning materials include role playing, group discussion, questioning, brainstorming, survey, creative writing, problem-solving and evaluation. The package will be used by fieldworkers to conduct island-based population education courses. full text

Web-based teaching video packages on anatomical education.

Science.gov (United States)

Ozer, Mehmet Asim; Govsa, Figen; Bati, Ayse Hilal

2017-11-01

The aim of this study was to study the effect of web-based teaching video packages on medical students' satisfaction during gross anatomy education. The objective was to test the hypothesis that individual preference, which can be related to learning style, influences individual utilization of the video packages developed specifically for the undergraduate medical curriculum. Web-based teaching video packages consisting of Closed Circuit Audiovisual System and Distance Education of Anatomy were prepared. 54 informative application videos each lasting an average 12 min, competent with learning objectives have been prepared. 300 young adults of the medical school on applied anatomy education were evaluated in terms of their course content, exam performance and perceptions. A survey was conducted to determine the difference between the students who did not use teaching packages with those who used it during or after the lecture. A mean of 150 hits for each student per year was indicated. Academic performance of anatomy has been an increase of 10 points. Positive effects of the video packages on anatomy education have manifested on the survey conducted on students. The survey was compiled under twenty different items including effectiveness, providing education opportunity and affecting learning positively. Additionally, the difference was remarkable that the positive ideas of the second year students on learning were statistically significant from that of the third year students. Web-based video packages are helpful, definitive, easily accessible and affordable which enable students with different pace of learning to reach information simultaneously in equal conditions and increase the learning activity in crowded group lectures in cadaver labs. We conclude that personality/learning preferences of individual students influence their use of video packages in the medical curriculum.

Design Brief--Packaging: More than Just a Box! Communications: Getting the Message across with Advertising. Technology Learning Activities.

Science.gov (United States)

Technology Teacher, 1991

1991-01-01

Each technology learning activity in this article includes content description, objectives, required materials, challenge, and evaluation questions. Subjects are designing product packages and communication through advertising. (SK)

Preparing mental health professionals for new directions in mental health practice: Evaluating the sensory approaches e-learning training package.

Science.gov (United States)

Meredith, Pamela; Yeates, Harriet; Greaves, Amanda; Taylor, Michelle; Slattery, Maddy; Charters, Michelle; Hill, Melissa

2018-02-01

The application of sensory modulation approaches in mental health settings is growing in recognition internationally. However, a number of barriers have been identified as limiting the implementation of the approach, including workplace culture and a lack of accessible and effective sensory approaches training. The aim of this project was to investigate the efficacy of providing this training through a custom-designed e-learning package. Participants in the present study were predominately nurses and occupational therapists working in mental health settings in Queensland, Australia. Data were collected from 121 participants using an online survey. Significant improvements were found between pre- and post-training in participants' real and perceived levels of knowledge, their perceived levels of confidence, and their attitudes towards using sensory modulation approaches in mental health settings. The findings of the study suggest that the custom-designed sensory approaches e-learning package is an effective, accessible, acceptable, and usable method to train health professionals in sensory modulation approaches. As this study is the first to analyse the efficacy of an e-learning sensory approaches package, the results are considered preliminary, and further investigation is required. © 2017 Australian College of Mental Health Nurses Inc.

Modeling and Fuzzy PDC Control and Its Application to an Oscillatory TLP Structure

Directory of Open Access Journals (Sweden)

Cheng-Wu Chen

2010-01-01

Full Text Available An analytical solution is derived to describe the wave-induced flow field and surge motion of a deformable platform structure controlled with fuzzy controllers in an oceanic environment. In the controller design procedure, a parallel distributed compensation (PDC scheme is utilized to construct a global fuzzy logic controller by blending all local state feedback controllers. The Lyapunov method is used to carry out stability analysis of a real system structure. The corresponding boundary value problems are then incorporated into scattering and radiation problems. These are analytically solved, based on the separation of variables, to obtain a series of solutions showing the harmonic incident wave motion and surge motion. The dependence of the wave-induced flow field and its resonant frequency on wave characteristics and structural properties including platform width, thickness and mass can thus be drawn with a parametric approach. The wave-induced displacement of the surge motion is determined from these mathematical models. The vibration of the floating structure and mechanical motion caused by the wave force are also discussed analytically based on fuzzy logic theory and the mathematical framework to find the decay in amplitude of the surge motion in the tension leg platform (TLP system. The expected effects of the damping in amplitude of the surge motion due to the control force on the structural response are obvious.

Strength and reliability of low temperature transient liquid phase bonded Cu-Sn-Cu interconnects

DEFF Research Database (Denmark)

Brincker, Mads; Söhl, Stefan; Eisele, Ronald

2017-01-01

As power electronic devices have tendencies to operate at higher temperatures and current densities, the demand for reliable and efficient packaging technologies are ever increasing. This paper reports the studies on application of transient liquid phase (TLP) bonding of CuSnCu systems...

A Thermodynamics Course Package in Onenote

Science.gov (United States)

Falconer, John L.; Nicodemus, Garret D.; Medlin, J. Will; deGrazia, Janet; McDanel, Katherine P.

2014-01-01

A ready-to-use package of active-learning materials for a semester-long chemical engineering thermodynamics course was prepared for instructors, and similar materials are being prepared for a material and energy balance course. The course package includes ConcepTests, explanations of the ConcepTests for instructors, links to screencasts, chapter…

An Interactive Computer Aided Electrical Engineering Education Package.

Science.gov (United States)

Cavati, Cicero Romao

This paper describes an educational package to help the learning process. A case study is presented of an energy distribution course in the Electrical Engineering Department at the Federal University of Espirito Santo (UFES). The advantages of the developed package are shown by comparing it with the traditional academic book. This package presents…

Accelerating what works: using qualitative research methods in developing a change package for a learning collaborative.

Science.gov (United States)

Sorensen, Asta V; Bernard, Shulamit L

2012-02-01

Learning (quality improvement) collaboratives are effective vehicles for driving coordinated organizational improvements. A central element of a learning collaborative is the change package-a catalogue of strategies, change concepts, and action steps that guide participants in their improvement efforts. Despite a vast literature describing learning collaboratives, little to no information is available on how the guiding strategies, change concepts, and action items are identified and developed to a replicable and actionable format that can be used to make measurable improvements within participating organizations. The process for developing the change package for the Health Resources and Services Administration's (HRSA) Patient Safety and Clinical Pharmacy Services Collaborative entailed environmental scan and identification of leading practices, case studies, interim debriefing meetings, data synthesis, and a technical expert panel meeting. Data synthesis involved end-of-day debriefings, systematic qualitative analyses, and the use of grounded theory and inductive data analysis techniques. This approach allowed systematic identification of innovative patient safety and clinical pharmacy practices that could be adopted in diverse environments. A case study approach enabled the research team to study practices in their natural environments. Use of grounded theory and inductive data analysis techniques enabled identification of strategies, change concepts, and actionable items that might not have been captured using different approaches. Use of systematic processes and qualitative methods in identification and translation of innovative practices can greatly accelerate the diffusion of innovations and practice improvements. This approach is effective whether or not an individual organization is part of a learning collaborative.

The development and evaluation of a holistic needs assessment and care planning learning package targeted at cancer nurses in the UK.

Science.gov (United States)

Henry, R; Hartley, B; Simpson, M; Doyle, N

2014-01-01

A project team from the United Kingdom Oncology Nursing Society developed a blended e-learning website to facilitate nurses to further develop their confidence and competencies in a range of skills related to assessing the holistic needs of people with cancer. The project team identified three areas which were integral to an holistic needs assessment (HNA) implementation project. These were project support information, project management skills, and practical competencies delivered in a blended e-learning package containing a series of accessible video presentations, supporting documents, and practical activities. The team worked with internal and external partners to ensure that a robust and inspiring programme was created. www.hnaforcancer.com was launched in October 2012 as a blended learning programme that incorporates e-learning on core subjects. These subjects are packaged as videoed presentations with supporting learning material and can be accessed via the UKONS website. By the end of the programme participants were equipped to identify and explore the essential requirements for HNA and care planning, more able to recognise potential need, and initiate care to prevent or minimise the risk of complications. Participants had also developed confidence and competency in new skills, including basic project management.

Efficacy of Multimedia Package in Communicative Skill in English

Science.gov (United States)

Singaravelu, G.

2014-01-01

The study enlightens the effectiveness of Multimedia Package in learning communicative skill in English. Objectives of the study: To prepare a Multimedia Package for developing communicative skill in English. To find out the impact of Multimedia Package in improving communicative skill in English. Quasi Experimental method was adopted in the…

Assessment Of The Use Of Autocad Package For Teaching And Learning Engineering Drawing In Afe Babalola University Ado-Ekiti

Directory of Open Access Journals (Sweden)

Oluwadare Joshua Oyebode

2015-08-01

Full Text Available ABSTRACT Drawing is the language of engineers. Drawings encompass the architectural civil structural and mechanical professions and they are the means of conveying diagrammatic detailed aspects of the design components of a structure. This Study intends to investigate an assessment of the use of AutoCAD package for teaching and learning engineering drawing in Afe Babalola University Ado-Ekiti in Ekiti State. The investigation was carried out by administering 100 questionnaires to engineering drawing lecturers and Students of the college of engineering in the university. The Findings revealed that there are positive impacts created by AutoCAD package on teachers and Students towards the teaching and learning of AutoCAD package to teach engineering drawing in all the seven programmes in the college. Engineering drawing is done in Nigerian universities polytechnics and colleges that offer courses in the areas of technical and vocational education TVE Architecture urban and regional planning and engineering. The traditional teaching and learning of technical drawing in most Nigerian universities has been characterized by the use of such manual equipment and materials part of drawing board dividers compasses set-squares protractors drawing paper drawing pen pencil scales and eraser among others. These manual tools and materials make drawing to be more time and energy consuming. Thus the arrival of the 21st century information and communication technological facilities or technologies presented a more interesting and efficient facilities for the teaching and learning of technical drawing in institutions in Nigeria. The information and communication technologies that are utilized in the teaching and learning of technical drawing include computer hardware and software computers projectors interactive broad internet scanners and so on. These are also known as computer assisted draftingdesign tools. The details of these technological facilities

Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer

Energy Technology Data Exchange (ETDEWEB)

Arafin, M.A. [Department of Mechanical and Industrial Engineering, Concordia University, Montreal, H3G 1M8 (Canada)], E-mail: ma_arafi@encs.concordia.ca; Medraj, M. [Department of Mechanical and Industrial Engineering, Concordia University, Montreal, H3G 1M8 (Canada)], E-mail: mmedraj@encs.concordia.ca; Turner, D.P. [Metallurgical Planning, Pratt and Whitney Canada, Longueuil, Que., J4G 1A1 (Canada)], E-mail: Daniel.P.Turner@pwc.ca; Bocher, P. [Department de Genie Mecanique, Ecole de Technologie Superieure, Montreal, H3C 1K3 (Canada)], E-mail: Philippe.Bocher@etsmtl.ca

2007-11-15

The random diffusion of solute atoms during transient liquid phase (TLP) bonding of SS 410 and 321 with nickel-based brazing filler alloy BNi-2 have been modeled using Random Walk Modeling technique. Cumulative probability distributions and probability density functions of isothermal solidification times have been calculated for different process conditions and verified with experimental data. The solubility limit of boron has been found to have decreased from 0.3 at.% at higher temperature bonding operations (1358-1394 K) because of substantial iron-rich base metal dissolution when SS 410 was used as base metals; whereas it remained unchanged for SS 321/BNi-2 combination because of high concentrations of nickel and chromium in the base metal. Silicon diffusion model, based on the EDS analysis, also predicted the isothermal solidification times reasonably well.

Stabilizing And Packaging Pu Materials Per 3013 At SRS

International Nuclear Information System (INIS)

STEVE, HENSEL

2005-01-01

The Savannah River Site (SRS) began packaging Pu metals into 3013 containers in April, 2003 and oxides in October, 2003. A total of 919 outer 3013 containers were made in the FB-Line at SRS when stabilization and packaging was completed in January, 2005. Experiences, lessons learned, and an overview of packaging activities are presented

Cross-Platform Learning Media Development of Software Installation on Computer Engineering and Networking Expertise Package

Directory of Open Access Journals (Sweden)

Afis Pratama

2018-03-01

Full Text Available Software Installation is one of the important lessons that must be mastered by student of computer and network engineering expertise package. But there is a problem about the lack of attention and concentration of students in following the teaching and learning process in the subject of installation of the software. The matter must immediately find a solution. This research refers to the technology development that is always increasing. The technology can be used as a tool to support learning activities. Currently, all grade 10 students in public vocational high school (SMK 8 Semarang Indonesia already have a gadget, either a smartphone or a laptop and the intensity of usage is high enough. Based on this phenomenon, this research aims to create a learning media software installation that is cross-platform. It is practical and can be carried easily in a smartphone and a laptop that has different operating system. So that, this media is expected to improve learning outcomes, understanding and enthusiasm of the students in the software installation lesson.

An e-learning course in medical immunology: does it improve learning outcome?

Science.gov (United States)

Boye, Sondre; Moen, Torolf; Vik, Torstein

2012-01-01

E-learning is used by most medical students almost daily and several studies have shown e-learning to improve learning outcome in small-scale interventions. However, few studies have explored the effects of e-learning in immunology. To study the effect of an e-learning package in immunology on learning outcomes in a written integrated examination and to examine student satisfaction with the e-learning package. All second-year students at a Norwegian medical school were offered an animated e-learning package in basic immunology as a supplement to the regular teaching. Each student's log-on-time was recorded and linked with the student's score on multiple choice questions included in an integrated end-of-the-year written examination. Student satisfaction was assessed through a questionnaire. The intermediate-range students (interquartile range) on average scored 3.6% better on the immunology part of the examination per hour they had used the e-learning package (p = 0.0046) and log-on-time explained 17% of the variance in immunology score. The best and the less skilled students' examination outcomes were not affected by the e-learning. The e-learning was well appreciated among the students. Use of an e-learning package in immunology in addition to regular teaching improved learning outcomes for intermediate-range students.

Nirex - The complete package

International Nuclear Information System (INIS)

Carr, N.A.; Rarok, M.

2002-01-01

Through continuous interaction with its customers, Nirex had identified the need for a comprehensive range of waste containers, reflecting the variety of wastes and operational undertakings. The current range consists of five standard containers. Standardisation is introduced across all waste packages to enable the safe and efficient operation of future waste management facilities. The practical lessons learned during the development of standard containers are in turn reflected in the container design work that Nirex has undertaken. They are also fed into the advice given to customers during evaluation of waste packaging proposals. (author)

Developing and evaluating health education learning package (HELP) to control soil-transmitted helminth infections among Orang Asli children in Malaysia.

Science.gov (United States)

Al-Delaimy, Ahmed K; Al-Mekhlafi, Hesham M; Lim, Yvonne A L; Nasr, Nabil A; Sady, Hany; Atroosh, Wahib M; Mahmud, Rohela

2014-09-02

This study was carried out to develop a health education learning package (HELP) about soil-transmitted helminth (STH) infections, and to evaluate what impact such a package could have in terms of reducing the incidence and intensity of STH infections among Orang Asli schoolchildren in Pahang, Malaysia. To identify the key risk factors of STH in Orang Asli communities, we applied an extensive mixed methods approach which involved an intensive literature review, as well as community-based discussions with children, their parents, teachers and health personnel, whilst also placing the children under direct observation. To evaluate the package, 317 children from two schools in Lipis, Pahang were screened for STH infections, treated by a 3-day course of albendazole and then followed up over the next 6 months. The knowledge of teachers, parents and children towards STH infections were assessed at baseline and after 3 months. The developed package consists of a half day workshop for teachers, a teacher's guide book to STH infections, posters, a comic book, a music video, a puppet show, drawing activities and an aid kit. The package was well-received with effective contributions being made by teachers, children and their parents. The incidence rates of hookworm infection at different assessment points were significantly lower among children in the intervention school compared to those in the control school. Similarly, the intensity of trichuriasis, ascariasis and hookworm infections were found to be significantly lower among children in the HELP group compared to those in the control group (P < 0.05). Moreover, the package significantly improved the knowledge, attitude and practices (KAP) of Orang Asli people and the knowledge of teachers towards STH infections. A school-based health education learning package (HELP) was developed which displayed a significant impact in terms of reducing the intensity of all three main STH infections, as well as in reducing the

Packaging- and transportation-related occurrence reports, October-December 1994

International Nuclear Information System (INIS)

Welch, M.J.; Dickerson, L.S.; Armstrong, C.J.

1995-02-01

The Oak Ridge National Laboratory (ORNL) Packaging and Transportation Safety Program (PATS), which is sponsored by the U.S. Department of Energy (DOE) Office of Environment, Safety and Health, Office of Facility Safety Analysis, EH-32, has been charged with the responsibility of retrieving reports and information pertaining to transportation or packaging incidents from the Occurrence Reporting and Processing System (ORPS). These selected reports are being analyzed for trends, impact on EH-32 policies and concerns, and lessons learned concerning transportation and packaging safety. This task is designed not only to keep EH-32 aware of current packaging and transportation incidents and potential transportation and packaging problems that may need attention on DOE sites but also to allow future dissemination of lessons learned to the Operations Offices and, subsequently, to management and operating contractors. This report, which covers the period from October 2 to December 31, 1994, covers the weekly tabular reports OR-94-40 through OR-94-52. These 12 reports, which contained a total of 75 occurrence reports (ORs) relating to packaging and transportation issues, were submitted to EH-32 for its information and use during this quarter. The 75 ORs that were selected from the hundreds reviewed are listed. The second column of Table I contains the PATS nature of occurrence (NOC) coding for the respective OR, and the third column lists the weekly report issue in which the OR was originally transmitted to DOE-Headquarters (HQ). The Lesson Learned bulletins produced this quarter are included. These two bulletins have been distributed to a large packaging and transportation safety audience and are included as a natural outgrowth of the quarterly reports

MGtoolkit: A python package for implementing metagraphs

Science.gov (United States)

Ranathunga, D.; Nguyen, H.; Roughan, M.

In this paper we present MGtoolkit: an open-source Python package for implementing metagraphs - a first of its kind. Metagraphs are commonly used to specify and analyse business and computer-network policies alike. MGtoolkit can help verify such policies and promotes learning and experimentation with metagraphs. The package currently provides purely textual output for visualising metagraphs and their analysis results.

MGtoolkit: A python package for implementing metagraphs

Directory of Open Access Journals (Sweden)

D. Ranathunga

2017-01-01

Full Text Available In this paper we present MGtoolkit : an open-source Python package for implementing metagraphs - a first of its kind. Metagraphs are commonly used to specify and analyse business and computer-network policies alike. MGtoolkit can help verify such policies and promotes learning and experimentation with metagraphs. The package currently provides purely textual output for visualising metagraphs and their analysis results.

The R package "sperrorest" : Parallelized spatial error estimation and variable importance assessment for geospatial machine learning

Science.gov (United States)

Schratz, Patrick; Herrmann, Tobias; Brenning, Alexander

2017-04-01

Computational and statistical prediction methods such as the support vector machine have gained popularity in remote-sensing applications in recent years and are often compared to more traditional approaches like maximum-likelihood classification. However, the accuracy assessment of such predictive models in a spatial context needs to account for the presence of spatial autocorrelation in geospatial data by using spatial cross-validation and bootstrap strategies instead of their now more widely used non-spatial equivalent. The R package sperrorest by A. Brenning [IEEE International Geoscience and Remote Sensing Symposium, 1, 374 (2012)] provides a generic interface for performing (spatial) cross-validation of any statistical or machine-learning technique available in R. Since spatial statistical models as well as flexible machine-learning algorithms can be computationally expensive, parallel computing strategies are required to perform cross-validation efficiently. The most recent major release of sperrorest therefore comes with two new features (aside from improved documentation): The first one is the parallelized version of sperrorest(), parsperrorest(). This function features two parallel modes to greatly speed up cross-validation runs. Both parallel modes are platform independent and provide progress information. par.mode = 1 relies on the pbapply package and calls interactively (depending on the platform) parallel::mclapply() or parallel::parApply() in the background. While forking is used on Unix-Systems, Windows systems use a cluster approach for parallel execution. par.mode = 2 uses the foreach package to perform parallelization. This method uses a different way of cluster parallelization than the parallel package does. In summary, the robustness of parsperrorest() is increased with the implementation of two independent parallel modes. A new way of partitioning the data in sperrorest is provided by partition.factor.cv(). This function gives the user the

Lessons learned from the fire test of Westinghouse's new type AF package, the traveller: (nothing like the real thing)

International Nuclear Information System (INIS)

Malloy, J.; Hempy, B.; Utlak, R.; Kent, N.

2004-01-01

Satisfying the thermal test requirements is a significant part of licensing a Type AF package. Regulations allow the thermal test requirements to be satisfied by several means including thermal analysis, thermal test inside a furnace, pool fire test, test using a scale model of the package, test using a segment or portion of a package, or test using a full-scale package. It was decided that a pool fire test using a full-scale package was the only way to adequately test the many features of the Traveller. Items crucial to criticality safety are more subject to damage during the thermal test. The Traveller design includes a substantial amount of neutron moderating material built into the packaging. This is so that criticality safety would not be dependent on moderation by HAC immersion. A full-scale fire test proved to be the only method to verify that the moderator survives. The Traveller also features a unique impact limiter system inside the packaging that is designed to lessen the impact of the contents in an end drop. It was determined that the full-scale fire test would be the only way to verify that the limiters would not ignite and burn inside the package. Actual pool fire temperatures are more severe than the 800 C minimum required in the regulations. Also it is impossible to model distortions and stresses caused by an actual fire, and these have a significant impact on any thermal analysis. This paper describes the many exploratory and scoping tests that preceded the final fire tes t. The lessons learned, though perhaps not new to those regularly employed in the fire testing profession, proved to be valuable to the licensee in completing the Traveller design

Variation in diffusion-induced solidification rate of liquated Ni-Cr-B insert during TLP bonding of Waspaloy superalloy

International Nuclear Information System (INIS)

Tokoro, K.; Wikstrom, N.P.; Ojo, O.A.; Chaturvedi, M.C.

2008-01-01

A microstructural study was performed on transient liquid phase (TLP) bonded Waspaloy superalloy with a Ni-Cr-B filler. The applicability of a diffusion model based on Fick's second law of diffusion to determine the time required for complete isothermal solidification (t f ) was investigated. Over the temperature range of 1065-1110 deg. C, experimental observations of t f were in reasonable agreement with t f values predicted by the diffusion model. However, a notable deviation was observed in joints prepared between 1175 and 1225 deg. C in that the rate of isothermal solidification was reduced at these temperatures resulting in the formation of a centerline eutectic-type microconstituent, which in contrast, was prevented from forming after holding the brazing assembly for an equivalent bonding time at a lower temperature of 1145 deg. C. Boride particles were observed as part of the eutectic product, which suggested that diffusion of boron out of the liquated insert was also reduced at these higher temperatures. A decrease in solubility of the melting point depressing solute, boron, with increase in temperature is suggested to be an important factor contributing to the reduction in isothermal solidification rate observed at the higher bonding temperatures

Learner support in a distributed learning environment:the use of WWW-based teachware packages

Directory of Open Access Journals (Sweden)

Christian Langenbach

1997-01-01

Full Text Available Various forms of education and training, based on the classical Computer Based Training (CBT, have become well established within companies and in higher education. With regard to the flexibility in terms of time and location, as well as in terms of incurred cost, they are far superior to traditional forms of instruction. A relatively recent development which has not yet gained widespread acceptance is the use of the World Wide Web (WWW as a basis and platform for distributed computer assisted teaching and learning. In addition to the advantages outlined with regard to classical CBT, the WWW offers the two advantages of world wide availablity as well as ease of promptly updating courses, but also adds many possibilities of collaborative learning. Using the Java programming language and the ever improving means of online presentation it has become possible to realize sophisticated WWW-based teachware packages which are comparable in terms of appearance and functionality to classical CBT applications created with dedicated authoring systems.

Packaging- and transportation-related occurrence reports, January--March 1995

International Nuclear Information System (INIS)

Dickerson, L.S.; Welch, M.J.; Armstrong, C.J.

1995-04-01

Reports on transportation/packaging incidents, from the Occurrence Reporting and Processing System, are being analyzed for trends, impact on DOE EH-32 policies and concerns, and lessons learned concerning transportation and packaging safety. Besides keeping EH-32 aware of current incidents and potential problems that may need attention on DOE sites, this task allows future dissemination of lessons learned to the Operations Offices and to management and operating contractors. This report covers the weekly tabular reports OR-95-01 through OR-95-13, which contained a total of 50 occurrence reports

A Computerized Petroleum Geology Package.

Science.gov (United States)

Moser, Louise E.

1983-01-01

Describes a package of computer programs developed to implement an oil exploration game that gives undergraduate students practical experience in applying theoretical principles of petroleum geology. The programs facilitate management of the game by the instructor and enhance the learning experience. (Author/MBR)

Effect of interlayer configurations on joint formation in TLP bonding of Ti-6AI-4V to Mg-AZ31

International Nuclear Information System (INIS)

Atieh, A. M.; Khan, T. I.

2013-01-01

In this research work, the transient liquid phase (TLP) bonding process was utilized to fabricate joints using thin (20 micro m) nickel and copper foils placed between two bonding surfaces to help facilitate joint formation. Two joint configurations were investigated, first, Ti-6Al-4V/CuNi/Mg-AZ31 and second, Ti-6Al-4V/NiCu/Mg-AZ3L The effect of bonding time on microstructural developments across the joint and the changes in mechanical properties were studied as a function of bonding temperature and pressure. The bonded specimens were examined by metallographic analysis, scanning electron microscopy (SEM), and X-ray diffraction (XRD). In both cases, intermetallic phase of CuMg/sub 2/ and Mg/sub 3/AlNi/sub 2/ was observed inside the joint region. The results show that joint shear strengths for the Ti-6Al-4V/CuNi/Mg-AZ31 setup produce joints with shear strength of 57 MPa compared to 27MPa for joints made using the Ti-6Al-4V/NiCu/Mg-AZ31 layer arrangement. (author)

Effect of interlayer configurations on joint formation in TLP bonding of Ti-6Al-4V to Mg-AZ31

International Nuclear Information System (INIS)

Atieh, A M; Khan, T I

2014-01-01

In this research work, the transient liquid phase (TLP) bonding process was utilized to fabricate joints using thin (20μm) nickel and copper foils placed between two bonding surfaces to help facilitate joint formation. Two joint configurations were investigated, first, Ti-6Al-4V/CuNi/Mg-AZ31 and second, Ti-6Al-4V/NiCu/Mg-AZ3L The effect of bonding time on microstructural developments across the joint and the changes in mechanical properties were studied as a function of bonding temperature and pressure. The bonded specimens were examined by metallographic analysis, scanning electron microscopy (SEM), and X-ray diffraction (XRD). In both cases, intermetallic phase of CuMg 2 and Mg 3 AlNi 2 was observed inside the joint region. The results show that joint shear strengths for the Ti-6Al-4V/CuNi/Mg-AZ31 setup produce joints with shear strength of 57 MPa compared to 27MPa for joints made using the Ti-6Al-4V/NiCu/Mg-AZ31 layer arrangement

Cigarette package design: opportunities for disease prevention.

Science.gov (United States)

Difranza, J R; Clark, D M; Pollay, R W

2002-06-15

To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers.

2010 drug packaging review: identifying problems to prevent errors.

Science.gov (United States)

2011-06-01

Prescrire's analyses showed that the quality of drug packaging in 2010 still left much to be desired. Potentially dangerous packaging remains a significant problem: unclear labelling is source of medication errors; dosing devices for some psychotropic drugs create a risk of overdose; child-proof caps are often lacking; and too many patient information leaflets are misleading or difficult to understand. Everything that is needed for safe drug packaging is available; it is now up to regulatory agencies and drug companies to act responsibly. In the meantime, health professionals can help their patients by learning to identify the pitfalls of drug packaging and providing safe information to help prevent medication errors.

Bayesian Network Constraint-Based Structure Learning Algorithms: Parallel and Optimized Implementations in the bnlearn R Package

Directory of Open Access Journals (Sweden)

Marco Scutari

2017-03-01

Full Text Available It is well known in the literature that the problem of learning the structure of Bayesian networks is very hard to tackle: Its computational complexity is super-exponential in the number of nodes in the worst case and polynomial in most real-world scenarios. Efficient implementations of score-based structure learning benefit from past and current research in optimization theory, which can be adapted to the task by using the network score as the objective function to maximize. This is not true for approaches based on conditional independence tests, called constraint-based learning algorithms. The only optimization in widespread use, backtracking, leverages the symmetries implied by the definitions of neighborhood and Markov blanket. In this paper we illustrate how backtracking is implemented in recent versions of the bnlearn R package, and how it degrades the stability of Bayesian network structure learning for little gain in terms of speed. As an alternative, we describe a software architecture and framework that can be used to parallelize constraint-based structure learning algorithms (also implemented in bnlearn and we demonstrate its performance using four reference networks and two real-world data sets from genetics and systems biology. We show that on modern multi-core or multiprocessor hardware parallel implementations are preferable over backtracking, which was developed when single-processor machines were the norm.

A Web-Based Interactive Homework Quiz and Tutorial Package To Motivate Undergraduate Chemistry Students and Improve Learning

Science.gov (United States)

Freasier, Ben; Collins, Grant; Newitt, Paula

2003-11-01

This study presents a Web-based interactive homework quiz and tutorial package that we have devised to improve the learning of first-year undergraduate chemistry students. We developed this automated scheme, based on WWWAssign, to produce randomly generated quizzes from a large database of questions, instantaneously grade that homework, give a fully-worked solution, and provide individually targeted tutorial assistance. Success in these quizzes was a necessary requirement before taking supervised tests. We found a positive correlation at the p= 0.1 level (90%) between voluntary extra use of the quizzes in the interactive package and the final course grade. All students undertook more quizzes than the base course requirement even though the quiz grades did not contribute to the total course grades. We suggest that students were motivated to pursue additional practice with the quizzes and associated tutorial information, as they perceived some benefit in this student-centered study tool and could access it at any time.

Cigarette package design: opportunities for disease prevention

Directory of Open Access Journals (Sweden)

Pollay RW

2003-01-01

Full Text Available Abstract Objective To learn how cigarette packages are designed and to determine to what extent cigarette packages are designed to target children. Methods A computer search was made of all Internet websites that post tobacco industry documents using the search terms: packaging, package design, package study, box design, logo, trademark and design study. All documents were retrieved electronically and analyzed by the first author for recurrent themes. Data Synthesis Cigarette manufacturers devote a great deal of attention and expense to package design because it is central to their efforts to create brand images. Colors, graphic elements, proportioning, texture, materials and typography are tested and used in various combinations to create the desired product and user images. Designs help to create the perceived product attributes and project a personality image of the user with the intent of fulfilling the psychological needs of the targeted type of smoker. The communication of these images and attributes is conducted through conscious and subliminal processes. Extensive testing is conducted using a variety of qualitative and quantitative research techniques. Conclusion The promotion of tobacco products through appealing imagery cannot be stopped without regulating the package design. The same marketing research techniques used by the tobacco companies can be used to design generic packaging and more effective warning labels targeted at specific consumers.

Lessons Learned From the Analysis of the SAFOD Downhole Instrument Package.

Science.gov (United States)

Johnson, Wade; Mencin, David; Mattioli, Glen

2013-04-01

In September of 2008 a downhole instrument package (DIP) consisting of a string of seismometers and tilt meters in isolated pressure vessels (PODs) was installed in the SAFOD main borehole. This package was designed to protect the sensors from the corrosive borehole environment and to operate for two years. The SAFOD borehole is not sealed at the bottom allowing borehole gasses and fluids infiltratration. Previous short-term installations of instruments in the SAFOD main borehole had also failed as a result of corrosion of the wireline cable head. The average failure time for these installations was two weeks. The use of stainless steel tubing connected to the pressure vessels through gas tight fittings was designed to block borehole fluid and gas infiltration of the individual instruments within the PODs. Unfortunately, the DIP completely failed within a month of its installation. In October of 2010, the DIP was removed from the borehole and a failure analysis was performed. This analysis involved to following steps: 1. Analysis of data to understand timeline of failure 2. Remove instrument safely, maintaining integrity of spliced section and documenting any external clues. Test instrument at surface 3. Open PODs in a way that allows for sampling and avoids damaging instruments. 4. Chemical analysis of fluids recovered from splices and PODs. 5. Instrument failure analysis by the instrument manufacturers. The analysis found that there were several design flaws in the DIP. This included the use of motor oil to take up air space in the individual PODs, use of a large number of gas tight seals, lack of internal seals, poorly done solder joints, use of non-temperature rated sensors, and lack of management oversight. The lessons learned from the attempts to instrument the SAFOD borehole are critical to the success of future deep borehole projects.

PROCESS OF SERVICE LEARNING IMPLEMENTATION IN PACKAGING DESIGN COURSE AT VISUAL COMMUNICATION DESIGN OF PETRA CHRISTIAN UNIVERSITY INDONESIA AND THE IMPACT TO MICRO BUSINESSES

Directory of Open Access Journals (Sweden)

Listia Natadjaja

2006-01-01

Full Text Available Service Learning sebagai suatu metode pembelajaran yang diimplementasikan ke dalam mata kuliah desain kemasan di jurusan Desain Komunikasi Visual Universitas Kristen Petra Surabaya Indonesia. Sebuah proses yang hasilnya bervariasi dan akan dijelaskan di dalam artikel ini. Service Learning sangat cocok diimplementasikan di Indonesia; karena masih banyaknya pengusaha yang membutuhkan sesuatu untuk menaikkan daya jual produknya. Mata kuliah desain kemasan mencoba untuk memecahkan masalah tersebut. Di dalam mata kuliah ini%2C mahasiswa dapat belajar%2C membantu melalui sebuah proses dan mereka dapat mengalami pembelajaran yang nyata untuk memberikan pelayanan kepada masyarakat umum dan pada akhir pelajaran mahasiswa dapat mempunyai portfolio. Di dalam tulisan ini penulis mencoba menjelaskan proses keseluruhan%2C keuntungan dan kerugian%2C segi-segi positif dan negatif dan prospek ke depan penerapan Service Learning secara umum di Indonesia dan khususnya di Surabaya. Abstract in Bahasa Indonesia : Service Learning as a new kind of leaning method was implemented in packaging design course at Visual Communication Design major of Petra Christian University Surabaya- Indonesia. The causes were various%2C and are explained in this study. Service Learning is suitable to be implemented in Indonesia; especially because there are a lot of low economic micro businesses these days that need to increase their sales. One of the courses that can solve this problem is through packaging design. Students can learn%2C help through the process%2C and they can have actual learning for these services and at the end of the lesson they can get their portfolio. This study tries to explain the whole process%2C benefit and loss%2C positive and negative of the implementation and the further prospect of Service Learning implementation in Indonesia especially in Surabaya. Service Learning%2C desain kemasan%2C makro industri.

Analyzing State Sequences with Probabilistic Suffix Trees: The PST R Package

Directory of Open Access Journals (Sweden)

Alexis Gabadinho

2016-08-01

Full Text Available This article presents the PST R package for categorical sequence analysis with probabilistic suffix trees (PSTs, i.e., structures that store variable-length Markov chains (VLMCs. VLMCs allow to model high-order dependencies in categorical sequences with parsimonious models based on simple estimation procedures. The package is specifically adapted to the field of social sciences, as it allows for VLMC models to be learned from sets of individual sequences possibly containing missing values; in addition, the package is extended to account for case weights. This article describes how a VLMC model is learned from one or more categorical sequences and stored in a PST. The PST can then be used for sequence prediction, i.e., to assign a probability to whole observed or artificial sequences. This feature supports data mining applications such as the extraction of typical patterns and outliers. This article also introduces original visualization tools for both the model and the outcomes of sequence prediction. Other features such as functions for pattern mining and artificial sequence generation are described as well. The PST package also allows for the computation of probabilistic divergence between two models and the fitting of segmented VLMCs, where sub-models fitted to distinct strata of the learning sample are stored in a single PST.

Packaging and transportation occurrence reporting

International Nuclear Information System (INIS)

Needels, T.S.

1996-01-01

The US Department of Energy (DOE) Order 231.1 calls for the maintenance of a database for all unclassified occurrence reports (ORs). ORS provide DOE with notice of incidents and accidents that endanger the public, workers, or DOE facility operations. To fulfill this policy, the DOE Occurrence Reporting and Processing System (ORPS) was established to require DOE facilities to report and process information concerning such events. The Oak Ridge National Laboratory (ORNL) provides DOE with data and analysis of occurrence related to packaging and transportation (P and T) safety. This program produces annual reports, lessons learned bulletins, and information for the packaging and transportation home page on the Internet. The analysis and reports provided can be used as a tool for oversight and a means for DOE sites to be proactive and anticipate problems through shared knowledge and lessons learned. To illustrate, some observable trends based on 3 years of the program are given. In summary, this program shows potential problem areas that need correcting, and possible breakdowns of safety

Innovative Approaches to Large Component Packaging

International Nuclear Information System (INIS)

Freitag, A.; Hooper, M.; Posivak, E.; Sullivan, J.

2006-01-01

presents the approach that has been successfully used for planning, implementing, and preparing for the disposition of large components such as those mentioned previously. It addresses the major regulatory and design requirements for packaging, transporting, and disposing of these components. The specific topics that are covered include radiological characterization, shielding, packaging design, on-site handling and movement, off-site transportation options, a brief discussion on disposition, and lessons learned. (authors)

Cloning and expression of three thaumatin-like protein genes from Polyporus umbellatus

Directory of Open Access Journals (Sweden)

Mengmeng Liu

2017-05-01

Full Text Available Genes encoding thaumatin-like protein (TLPs are frequently found in fungal genomes. However, information on TLP genes in Polyporus umbellatus is still limited. In this study, three TLP genes were cloned from P. umbellatus. The full-length coding sequence of PuTLP1, PuTLP2 and PuTLP3 were 768, 759 and 561 bp long, respectively, encoding for 256, 253 and 187 amino acids. Phylogenetic trees showed that P. umbellatus PuTLP1, PuTLP2 and PuTLP3 were clustered with sequences from Gloeophyllum trabeum, Trametes versicolor and Stereum hirsutum, respectively. The expression patterns of the three TLP genes were higher in P. umbellatus with Armillaria mellea infection than in the sclerotia without A. mellea. Furthermore, over-expression of three PuTLPs were carried out in Escherichia coli BL21 (DE3 strain, and high quality proteins were obtained using Ni-NTA resin that can be used for preparation of specific antibodies. These results suggest that PuTLP1, PuTLP2 and PuTLP3 in P. umbellatus may be involved in the defense response to A. mellea infections.

Learn by Yourself: The Self-Learning Tools for Qualitative Analysis Software Packages

Science.gov (United States)

Freitas, Fábio; Ribeiro, Jaime; Brandão, Catarina; Reis, Luís Paulo; de Souza, Francislê Neri; Costa, António Pedro

2017-01-01

Computer Assisted Qualitative Data Analysis Software (CAQDAS) are tools that help researchers to develop qualitative research projects. These software packages help the users with tasks such as transcription analysis, coding and text interpretation, writing and annotation, content search and analysis, recursive abstraction, grounded theory…

DOE-EM-45 Packaging Operations And Maintenance Course

International Nuclear Information System (INIS)

Watkins, R.; England, J.

2010-01-01

Savannah River National Laboratory - Savannah River Packaging Technology (SRNL-SRPT) delivered the inaugural offering of the Packaging Operations and Maintenance Course for DOE-EM-45's Packaging Certification Program (PCP) at the University of South Carolina Aiken on September 1 and 2, 2009. Twenty-nine students registered, attended, and completed this training. The DOE-EM-45 Packaging Certification Program (PCP) sponsored the presentation of a new training course, Packaging Maintenance and Operations, on September 1-2, 2009 at the University of South Carolina Aiken (USC-Aiken) campus in Aiken, SC. The premier offering of the course was developed and presented by the Savannah River National Laboratory, and attended by twenty-nine students across the DOE, NNSA and private industry. This training informed package users of the requirements associated with handling shipping containers at a facility (user) level and provided a basic overview of the requirements typically outlined in Safety Analysis Report for Packaging (SARP) Chapters 1, 7, and 8. The course taught packaging personnel about the regulatory nature of SARPs to help reduce associated and often costly packaging errors. Some of the topics covered were package contents, loading, unloading, storage, torque requirements, maintaining records, how to handle abnormal conditions, lessons learned, leakage testing (including demonstration), and replacement parts. The target audience for this course was facility operations personnel, facility maintenance personnel, and field quality assurance personnel who are directly involved in the handling of shipping containers. The training also aimed at writers of SARP Chapters 1, 7, and 8, package designers, and anyone else involved in radioactive material packaging and transportation safety. Student feedback and critiques of the training were very positive. SRNL will offer the course again at USC Aiken in September 2010.

Flexible State-Merging for learning (P)DFAs in Python

OpenAIRE

Hammerschmidt, Christian; Loos, Benjamin Laurent; Verwer, Sicco; State, Radu

2016-01-01

We present a Python package for learning (non-)probabilistic deterministic finite state automata and provide heuristics in the red-blue framework. As our package is built along the API of the popular \\texttt{scikit-learn} package, it is easy to use and new learning methods are easy to add. It provides PDFA learning as an additional tool for sequence prediction or classification to data scientists, without the need to understand the algorithm itself but rather the limitations of PDFA as a mode...

Photosystem II repair and plant immunity: Lessons learned from Arabidopsis mutant lacking the THYLAKOID LUMEN PROTEIN 18.3

Directory of Open Access Journals (Sweden)

Sari eJärvi

2016-03-01

Full Text Available Chloroplasts play an important role in the cellular sensing of abiotic and biotic stress. Signals originating from photosynthetic light reactions, in the form of redox and pH changes, accumulation of reactive oxygen and electrophile species or stromal metabolites are of key importance in chloroplast retrograde signaling. These signals initiate plant acclimation responses to both abiotic and biotic stresses. To reveal the molecular responses activated by rapid fluctuations in growth light intensity, gene expression analysis was performed with Arabidopsis thaliana wild type and the tlp18.3 mutant plants, the latter showing a stunted growth phenotype under fluctuating light conditions (Biochem. J, 406, 415-425. Expression pattern of genes encoding components of the photosynthetic electron transfer chain did not differ between fluctuating and constant light conditions, neither in wild type nor in tlp18.3 plants, and the composition of the thylakoid membrane protein complexes likewise remained unchanged. Nevertheless, the fluctuating light conditions repressed in wild-type plants a broad spectrum of genes involved in immune responses, which likely resulted from shade-avoidance responses and their intermixing with hormonal signaling. On the contrary, in the tlp18.3 mutant plants there was an imperfect repression of defense-related transcripts upon growth under fluctuating light, possibly by signals originating from minor malfunction of the photosystem II (PSII repair cycle, which directly or indirectly modulated the transcript abundances of genes related to light perception via phytochromes. Consequently, a strong allocation of resources to defense reactions in the tlp18.3 mutant plants presumably results in the stunted growth phenotype under fluctuating light.

Training Package Implementation: Innovative and Flexible Approaches.

Science.gov (United States)

Meyers, Dave; Blom, Kaaren

The implementation of training packages (TPs) in Australian workplaces was examined through case studies of the use of TPs in nontraditional trade areas by six innovative registered training organizations (RTOs) across Australia. The study focused on the extent to which new and flexible approaches to learning, training delivery, and assessment…

Safety Analysis Report - Packages, 9965, 9968, 9972-9975 Packages

International Nuclear Information System (INIS)

Blanton, P.

2000-01-01

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on four type B Packages: the 9972, 9973, 9974, and 9975 packages. Because all four packages have similar designs with very similar performance characteristics, all of them are presented in a single SARP. The performance evaluation presented in this SARP documents the compliance of the 9975 package with the regulatory safety requirements. Evaluations of the 9972, 9973, and 9974 packages support that of the 9975. To avoid confusion arising from the inclusion of four packages in a single document, the text segregates the data for each package in such a way that the reader interested in only one package can progress from Chapter 1 through Chapter 9. The directory at the beginning of each chapter identifies each section that should be read for a given package. Sections marked ''all'' are generic to all packages

The effect of an interactive e-drug calculations package on nursing students' drug calculation ability and self-efficacy.

Science.gov (United States)

McMullan, Miriam; Jones, Ray; Lea, Susan

2011-06-01

Nurses need to be competent and confident in performing drug calculations to ensure patient safety. The purpose of this study is to compare an interactive e-drug calculations package, developed using Cognitive Load Theory as its theoretical framework, with traditional handout learning support on nursing students' drug calculation ability, self-efficacy and support material satisfaction. A cluster randomised controlled trial comparing the e-package with traditional handout learning support was conducted with a September cohort (n=137) and a February cohort (n=92) of second year diploma nursing students. Students from each cohort were geographically dispersed over 3 or 4 independent sites. Students from each cohort were invited to participate, halfway through their second year, before and after a 12 week clinical practice placement. During their placement the intervention group received the e-drug calculations package while the control group received traditional 'handout' support material. Drug calculation ability and self-efficacy tests were given to the participants pre- and post-intervention. Participants were given the support material satisfaction scale post-intervention. Students in both cohorts randomised to e-learning were more able to perform drug calculations than those receiving the handout (September: mean 48.4% versus 34.7%, p=0.027; February: mean 47.6% versus 38.3%, p=0.024). February cohort students using the e-package were more confident in performing drug calculations than those students using handouts (self-efficacy mean 56.7% versus 45.8%, p=0.022). There was no difference in improved self-efficacy between intervention and control for students in the September cohort. Students who used the package were more satisfied with its use than the students who used the handout (mean 29.6 versus 26.5, p=0.001), particularly with regard to the package enhancing their learning (p=0.023), being an effective way to learn (p=0.005), providing practice and

Packaging Solutions : Delivering customer value through Logistical Packaging: A Case Study at Stora Enso Packaging

OpenAIRE

Shan, Kun; Julius, Joezer

2015-01-01

AbstractBackground;Despite of the significant role of packaging within logistics and supply chain management, packaging is infrequently studied as focal point in supply chain. Most of the previous logistics research studies tend to explain the integration between packaging and logistics through logistical packaging. In very rare cases, the studies mentioned about customer value. Therefore the major disadvantage of these studies is that, they didn’t consider logistical packaging and customer v...

Packaging fluency

DEFF Research Database (Denmark)

Mocanu, Ana; Chrysochou, Polymeros; Bogomolova, Svetlana

2011-01-01

Research on packaging stresses the need for packaging design to read easily, presuming fast and accurate processing of product-related information. In this paper we define this property of packaging as “packaging fluency”. Based on the existing marketing and cognitive psychology literature on pac...

Scikit-learn: Machine Learning in Python

OpenAIRE

Pedregosa, Fabian; Varoquaux, Gaël; Gramfort, Alexandre; Michel, Vincent; Thirion, Bertrand; Grisel, Olivier; Blondel, Mathieu; Prettenhofer, Peter; Weiss, Ron; Dubourg, Vincent; Vanderplas, Jake; Passos, Alexandre; Cournapeau, David; Brucher, Matthieu; Perrot, Matthieu

2011-01-01

International audience; Scikit-learn is a Python module integrating a wide range of state-of-the-art machine learning algorithms for medium-scale supervised and unsupervised problems. This package focuses on bringing machine learning to non-specialists using a general-purpose high-level language. Emphasis is put on ease of use, performance, documentation, and API consistency. It has minimal dependencies and is distributed under the simplified BSD license, encouraging its use in both academic ...

Scikit-learn: Machine Learning in Python

OpenAIRE

Pedregosa, Fabian; Varoquaux, Gaël; Gramfort, Alexandre; Michel, Vincent; Thirion, Bertrand; Grisel, Olivier; Blondel, Mathieu; Louppe, Gilles; Prettenhofer, Peter; Weiss, Ron; Dubourg, Vincent; Vanderplas, Jake; Passos, Alexandre; Cournapeau, David; Brucher, Matthieu

2012-01-01

Scikit-learn is a Python module integrating a wide range of state-of-the-art machine learning algorithms for medium-scale supervised and unsupervised problems. This package focuses on bringing machine learning to non-specialists using a general-purpose high-level language. Emphasis is put on ease of use, performance, documentation, and API consistency. It has minimal dependencies and is distributed under the simplified BSD license, encouraging its use in both academic and commercial settings....

Microelectronic packaging

CERN Document Server

Datta, M; Schultze, J Walter

2004-01-01

Microelectronic Packaging analyzes the massive impact of electrochemical technologies on various levels of microelectronic packaging. Traditionally, interconnections within a chip were considered outside the realm of packaging technologies, but this book emphasizes the importance of chip wiring as a key aspect of microelectronic packaging, and focuses on electrochemical processing as an enabler of advanced chip metallization.Divided into five parts, the book begins by outlining the basics of electrochemical processing, defining the microelectronic packaging hierarchy, and emphasizing the impac

The Packaging Handbook -- A guide to package design

International Nuclear Information System (INIS)

Shappert, L.B.

1995-01-01

The Packaging Handbook is a compilation of 14 technical chapters and five appendices that address the life cycle of a packaging which is intended to transport radioactive material by any transport mode in normal commerce. Although many topics are discussed in depth, this document focuses on the design aspects of a packaging. The Handbook, which is being prepared under the direction of the US Department of Energy, is intended to provide a wealth of technical guidance that will give designers a better understanding of the regulatory approval process, preferences of regulators in specific aspects of packaging design, and the types of analyses that should be seriously considered when developing the packaging design. Even though the Handbook is concerned with all packagings, most of the emphasis is placed on large packagings that are capable of transporting large radioactive sources that are also fissile (e.g., spent fuel). These are the types of packagings that must address the widest range of technical topics in order to meet domestic and international regulations. Most of the chapters in the Handbook have been drafted and submitted to the Oak Ridge National Laboratory for editing; the majority of these have been edited. This report summarizes the contents

The fastclime Package for Linear Programming and Large-Scale Precision Matrix Estimation in R.

Science.gov (United States)

Pang, Haotian; Liu, Han; Vanderbei, Robert

2014-02-01

We develop an R package fastclime for solving a family of regularized linear programming (LP) problems. Our package efficiently implements the parametric simplex algorithm, which provides a scalable and sophisticated tool for solving large-scale linear programs. As an illustrative example, one use of our LP solver is to implement an important sparse precision matrix estimation method called CLIME (Constrained L 1 Minimization Estimator). Compared with existing packages for this problem such as clime and flare, our package has three advantages: (1) it efficiently calculates the full piecewise-linear regularization path; (2) it provides an accurate dual certificate as stopping criterion; (3) it is completely coded in C and is highly portable. This package is designed to be useful to statisticians and machine learning researchers for solving a wide range of problems.

A blended learning approach to teaching CVAD care and maintenance.

Science.gov (United States)

Hainey, Karen; Kelly, Linda J; Green, Audrey

2017-01-26

Nurses working within both acute and primary care settings are required to care for and maintain central venous access devices (CVADs). To support these nurses in practice, a higher education institution and local health board developed and delivered CVAD workshops, which were supported by a workbook and competency portfolio. Following positive evaluation of the workshops, an electronic learning (e-learning) package was also introduced to further support this clinical skill in practice. To ascertain whether this blended learning approach to teaching CVAD care and maintenance prepared nurses for practice, the learning package was evaluated through the use of electronic questionnaires. Results highlighted that the introduction of the e-learning package supported nurses' practice, and increased their confidence around correct clinical procedures.

Transducer Like Proteins of Campylobacter jejuni 81-176: Role in chemotaxis and colonization of the chicken gastrointestinal tract

Directory of Open Access Journals (Sweden)

Gireesh eRajashekara

2015-05-01

Full Text Available Transducer Like Proteins (Tlps, also known as Methyl accepting chemotaxis proteins (MCP, enable enteric pathogens to respond to changing nutrient levels in the environment by mediating taxis towards or away from specific chemoeffector molecules such as nutrients. Despite recent advances in the characterization of chemotaxis responses in Campylobacter jejuni, the impact of Tlps on the adaptation of this pathogen to disparate niches and hosts is not fully characterized. The latter is particularly evident in the case of C. jejuni 81-176, a strain that is known to be highly invasive. Furthermore, the cytoplasmic group C Tlps (Tlp5, 6, and 8 was not extensively evaluated. Here, we investigated the role of C. jejuni 81-176 Tlps in chemotaxis towards various substrates, biofilm formation, in vitro interaction with human intestinal cells, and chicken colonization. We found that the ∆tlp6 and ∆tlp10 mutants exhibited decreased chemotaxis towards aspartate whereas the ∆tlp6 mutant displayed a decreased chemotaxis towards Tri-Carboxylic Acid (TCA cycle intermediates such as pyruvate, isocitrate, and succinate. Our findings also corroborated that more than one Tlp is involved in mediating chemotaxis towards the same nutrient. The deletion of tlps affected important phenotypes such as motility, biofilm formation, and invasion of human intestinal epithelial cells (INT-407. The ∆tlp8 mutant displayed increased motility in soft agar and showed decreased biofilm formation. The ∆tlp8 and ∆tlp9 mutants were significantly defective in invasion in INT-407 cells. The ∆tlp10 mutant was defective in colonization of the chicken proximal and distal gastrointestinal tract, while the ∆tlp6 and ∆tlp8 mutants showed reduced colonization of the duodenum and jejunum. Our results highlight the importance of Tlps in C. jejuni’s adaptation and pathobiology.

The Use of Digital Radiography in the Evaluation of Radioactive Materials. Packaging Performance Testing

International Nuclear Information System (INIS)

May, C; Lawrence Gelder, L; Boyd Howard, B

2007-01-01

New designs of radioactive material shipping packages are required to be evaluated in accordance with 10 CFR Part 71, ''Packaging and Transportation of Radioactive Material''. This paper will discuss the use of digital radiography to evaluate the effects of the tests required by 10 CFR 71.71, Normal Conditions of Transport (NCT), and 10 CFR 71.73, Hypothetical Accident Conditions (HAC). One acceptable means of evaluating packaging performance is to subject packagings to the series of NCT and HAC tests. The evaluation includes a determination of the effect on the packaging by the conditions and tests. That determination has required that packagings be cut and sectioned to learn the actual effects on internal components. Digital radiography permits the examination of internal packaging components without sectioning a package. This allows a single package to be subjected to a series of tests. After each test, the package is digitally radiographed and the effects of particular tests evaluated. Radiography reduces the number of packages required for testing and also reduces labor and materials required to section and evaluate numerous packages. This paper will include a description of the digital radiography equipment used in the testing and evaluation of the 9977 and 9978 packages at SRNL. The equipment is capable of making a single radiograph of a full-sized package in one exposure. Radiographs will be compared to sectioned packages that show actual conditions compared to radiographic images

GOexpress: an R/Bioconductor package for the identification and visualisation of robust gene ontology signatures through supervised learning of gene expression data.

Science.gov (United States)

Rue-Albrecht, Kévin; McGettigan, Paul A; Hernández, Belinda; Nalpas, Nicolas C; Magee, David A; Parnell, Andrew C; Gordon, Stephen V; MacHugh, David E

2016-03-11

Identification of gene expression profiles that differentiate experimental groups is critical for discovery and analysis of key molecular pathways and also for selection of robust diagnostic or prognostic biomarkers. While integration of differential expression statistics has been used to refine gene set enrichment analyses, such approaches are typically limited to single gene lists resulting from simple two-group comparisons or time-series analyses. In contrast, functional class scoring and machine learning approaches provide powerful alternative methods to leverage molecular measurements for pathway analyses, and to compare continuous and multi-level categorical factors. We introduce GOexpress, a software package for scoring and summarising the capacity of gene ontology features to simultaneously classify samples from multiple experimental groups. GOexpress integrates normalised gene expression data (e.g., from microarray and RNA-seq experiments) and phenotypic information of individual samples with gene ontology annotations to derive a ranking of genes and gene ontology terms using a supervised learning approach. The default random forest algorithm allows interactions between all experimental factors, and competitive scoring of expressed genes to evaluate their relative importance in classifying predefined groups of samples. GOexpress enables rapid identification and visualisation of ontology-related gene panels that robustly classify groups of samples and supports both categorical (e.g., infection status, treatment) and continuous (e.g., time-series, drug concentrations) experimental factors. The use of standard Bioconductor extension packages and publicly available gene ontology annotations facilitates straightforward integration of GOexpress within existing computational biology pipelines.

Evaluation of an e-learning package to improve understanding of blood-borne viruses amongst prison staff in Wales, UK.

Science.gov (United States)

Ellen Perrett, Stephanie; Erricker, Mark; Lyons, Marion

2014-01-01

The purpose of this paper is to provide education on blood-borne viruses (BBVs) to prison staff to help reduce stigma within the prisons, improve the care prisoners receive and reduce the risk of occupational transmission. An e-module was used to improve staff understanding of hepatitis B (HBV), hepatitis C (HCV) and HIV at a prison in Wales, UK. An assessment was used to gather data on prison staff understanding of BBVs prior to undertaking the e-module. In total, 530/697 (76 per cent) prison staff completed the BBV e-module. Average pre- and post-course assessment scores were 8.6/11 and 10.85/11, respectively. Most staff understood the modes of hepatitis transmission, however, gaps in understanding were highlighted. In total, 22 per cent of staff believed HBV and HCV were airborne, 9 per cent believed transmission occurred through sharing cutlery. In total, 31 per cent of staff believed prisoners with hepatitis should declare their status to the prison. Practical implications: The e-module significantly improved staff understanding of BBVs and should be incorporated into future prison training packages. Future education should include how BBVs are not transmitted with an emphasis on casual contact. Medical confidentiality in prisons should also be addressed. Improving understanding will help reduce the stigma of BBVs within prison and improve the multidisciplinary care the prisoner receives. To the authors knowledge this is the first published evaluation of a BBV learning package for custodial staff. Evaluation of this educational package demonstrates a unique and valuable insight into the general understanding of BBVs by prison staff in Wales, UK.

MEMS packaging

CERN Document Server

Hsu , Tai-Ran

2004-01-01

MEMS Packaging discusses the prevalent practices and enabling techniques in assembly, packaging and testing of microelectromechanical systems (MEMS). The entire spectrum of assembly, packaging and testing of MEMS and microsystems, from essential enabling technologies to applications in key industries of life sciences, telecommunications and aerospace engineering is covered. Other topics included are bonding and sealing of microcomponents, process flow of MEMS and microsystems packaging, automated microassembly, and testing and design for testing.The Institution of Engineering and Technology is

Packaging design criteria for the Hanford Ecorok Packaging

International Nuclear Information System (INIS)

Mercado, M.S.

1996-01-01

The Hanford Ecorok Packaging (HEP) will be used to ship contaminated water purification filters from K Basins to the Central Waste Complex. This packaging design criteria documents the design of the HEP, its intended use, and the transportation safety criteria it is required to meet. This information will serve as a basis for the safety analysis report for packaging

ALLA SCOPERTA DEL PACKAGING DESIGN CON IL WEBQUEST

Directory of Open Access Journals (Sweden)

Antonietta Gobbis

2013-01-01

Full Text Available Il seguente saggio tratta le possibilità di presentazione in Università straniere, dove si insegna l’ItalianoL2, di un aspetto culturale italiano di forte impatto all’estero come il design, attraverso l’innovativa metodologia del webquest. L’iniziale parte teorica descrive il webquest come metodo didattico costruttivista, con particolare riferimento alle sue caratteristiche, parti costituenti e tipologie. Nella seconda parte vengono dati esempi concreti di webquest di breve e lunga durata su due prodotti italiani molto famosi di packaging design, che hanno festeggiato il loro anniversario nel 2012: il Bacio Perugina e il Campari Soda. I risultati positivi di entrambi i progetti intendono mostrare i vantaggi di una didattica centrata sull’alunno basata su attività di problem-solving e strategie di cooperative learning.  Discovering packaging design through webquest The following essay deals about the possibilities to introduce a very successful cultural topic like Italian Design in Universities abroad, where Italian is taught as second foreign language, through the innovative methodology of WebQuests. The theoretical part describes WebQuests as constructivist didactic method with reference to its characteristics, main constituent parts  and typologies. In the second part we give concrete examples of short and long term WebQuests about two very famous packaging design Italian products which celebrated in 2012 their anniversary: BacioPerugina and Campari Soda. The positive results of both projects aim to show the advantages of learner-centered teaching methods based on problem-solving activities and cooperative learning strategies.

R Package multiPIM: A Causal Inference Approach to Variable Importance Analysis

Directory of Open Access Journals (Sweden)

Stephan J Ritter

2014-04-01

Full Text Available We describe the R package multiPIM, including statistical background, functionality and user options. The package is for variable importance analysis, and is meant primarily for analyzing data from exploratory epidemiological studies, though it could certainly be applied in other areas as well. The approach taken to variable importance comes from the causal inference field, and is different from approaches taken in other R packages. By default, multiPIM uses a double robust targeted maximum likelihood estimator (TMLE of a parameter akin to the attributable risk. Several regression methods/machine learning algorithms are available for estimating the nuisance parameters of the models, including super learner, a meta-learner which combines several different algorithms into one. We describe a simulation in which the double robust TMLE is compared to the graphical computation estimator. We also provide example analyses using two data sets which are included with the package.

Packaging microservices

DEFF Research Database (Denmark)

Montesi, Fabrizio; Thrane, Dan Sebastian

2017-01-01

We describe a first proposal for a new packaging system for microservices based on the Jolie programming language, called the Jolie Package Manager (JPM). Its main features revolve around service interfaces, which make the functionalities that a service provides and depends on explicit. For the f......We describe a first proposal for a new packaging system for microservices based on the Jolie programming language, called the Jolie Package Manager (JPM). Its main features revolve around service interfaces, which make the functionalities that a service provides and depends on explicit...

PRIDE Surveillance Projects Data Packaging Project, Information Package Specification Version 1.0

Energy Technology Data Exchange (ETDEWEB)

Kelleher, D.M.; Shipp, R. L.; Mason, J. D.

2009-09-28

This document contains a specification for a standard XML document format called an information package that can be used to store information and the context required to understand and use that information in information management systems and other types of information archives. An information package consists of packaged information, a set of information metadata that describes the packaged information, and an XML signature that protects the packaged information. The information package described in this specification was designed to be used to store Department of Energy (DOE) and National Nuclear Security Administration (NNSA) information and includes the metadata required for that information: a unique package identifier, information marking that conforms to DOE and NNSA requirements, and access control metadata. Information package metadata can also include information search terms, package history, and notes. Packaged information can be text content, binary content, and the contents of files and other containers. A single information package can contain multiple types of information. All content not in a text form compatible with XML must be in a text encoding such as base64. Package information is protected by a digital XML signature that can be used to determine whether the information has changed since it was signed and to identify the source of the information. This specification has been tested but has not been used to create production information packages. The authors expect that gaps and unclear requirements in this specification will be identified as this specification is used to create information packages and as information stored in information packages is used. The authors expect to issue revised versions of this specification as needed to address these issues.

PerMallows: An R Package for Mallows and Generalized Mallows Models

Directory of Open Access Journals (Sweden)

Ekhine Irurozki

2016-08-01

Full Text Available In this paper we present the R package PerMallows, which is a complete toolbox to work with permutations, distances and some of the most popular probability models for permutations: Mallows and the Generalized Mallows models. The Mallows model is an exponential location model, considered as analogous to the Gaussian distribution. It is based on the definition of a distance between permutations. The Generalized Mallows model is its best-known extension. The package includes functions for making inference, sampling and learning such distributions. The distances considered in PerMallows are Kendall's τ , Cayley, Hamming and Ulam.

Leaf turgor loss point is correlated with drought tolerance and leaf carbon economics traits.

Science.gov (United States)

Zhu, Shi-Dan; Chen, Ya-Jun; Ye, Qing; He, Peng-Cheng; Liu, Hui; Li, Rong-Hua; Fu, Pei-Li; Jiang, Guo-Feng; Cao, Kun-Fang

2018-05-01

Leaf turgor loss point (πtlp) indicates the capacity of a plant to maintain cell turgor pressure during dehydration, which has been proven to be strongly predictive of the plant response to drought. In this study, we compiled a data set of πtlp for 1752 woody plant individuals belonging to 389 species from nine major woody biomes in China, along with reduced sample size of hydraulic and leaf carbon economics data. We aimed to investigate the variation of πtlp across biomes varying in water availability. We also tested two hypotheses: (i) πtlp predicts leaf hydraulic safety margins and (ii) it is correlated with leaf carbon economics traits. Our results showed that there was a positive relationship between πtlp and aridity index: biomes from humid regions had less negative values than those from arid regions. This supports the idea that πtlp may reflect drought tolerance at the scale of woody biomes. As expected, πtlp was significantly positively correlated with leaf hydraulic safety margins that varied significantly across biomes, indicating that this trait may be useful in modelling changes of forest components in response to increasing drought. Moreover, πtlp was correlated with a suite of coordinated hydraulic and economics traits; therefore, it can be used to predict the position of a given species along the 'fast-slow' whole-plant economics spectrum. This study expands our understanding of the biological significance of πtlp not only in drought tolerance, but also in the plant economics spectrum.

In-Package Chemistry Abstraction

Energy Technology Data Exchange (ETDEWEB)

P.S. Domski

2003-07-21

The work associated with the development of this model report was performed in accordance with the requirements established in ''Technical Work Plan for Waste Form Degradation Modeling, Testing, and Analyses in Support of SR and LA'' (BSC 2002a). The in-package chemistry model and in-package chemistry model abstraction are developed to predict the bulk chemistry inside of a failed waste package and to provide simplified expressions of that chemistry. The purpose of this work is to provide the abstraction model to the Performance Assessment Project and the Waste Form Department for development of geochemical models of the waste package interior. The scope of this model report is to describe the development and validation of the in-package chemistry model and in-package chemistry model abstraction. The in-package chemistry model will consider chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) and codisposed high-level waste glass (HLWG) and N Reactor spent fuel (CDNR). The in-package chemistry model includes two sub-models, the first a water vapor condensation (WVC) model, where water enters a waste package as vapor and forms a film on the waste package components with subsequent film reactions with the waste package materials and waste form--this is a no-flow model, the reacted fluids do not exit the waste package via advection. The second sub-model of the in-package chemistry model is the seepage dripping model (SDM), where water, water that may have seeped into the repository from the surrounding rock, enters a failed waste package and reacts with the waste package components and waste form, and then exits the waste package with no accumulation of reacted water in the waste package. Both of the submodels of the in-package chemistry model are film models in contrast to past in-package chemistry models where all of the waste package pore space was filled with water. The

In-Package Chemistry Abstraction

International Nuclear Information System (INIS)

P.S. Domski

2003-01-01

The work associated with the development of this model report was performed in accordance with the requirements established in ''Technical Work Plan for Waste Form Degradation Modeling, Testing, and Analyses in Support of SR and LA'' (BSC 2002a). The in-package chemistry model and in-package chemistry model abstraction are developed to predict the bulk chemistry inside of a failed waste package and to provide simplified expressions of that chemistry. The purpose of this work is to provide the abstraction model to the Performance Assessment Project and the Waste Form Department for development of geochemical models of the waste package interior. The scope of this model report is to describe the development and validation of the in-package chemistry model and in-package chemistry model abstraction. The in-package chemistry model will consider chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) and codisposed high-level waste glass (HLWG) and N Reactor spent fuel (CDNR). The in-package chemistry model includes two sub-models, the first a water vapor condensation (WVC) model, where water enters a waste package as vapor and forms a film on the waste package components with subsequent film reactions with the waste package materials and waste form--this is a no-flow model, the reacted fluids do not exit the waste package via advection. The second sub-model of the in-package chemistry model is the seepage dripping model (SDM), where water, water that may have seeped into the repository from the surrounding rock, enters a failed waste package and reacts with the waste package components and waste form, and then exits the waste package with no accumulation of reacted water in the waste package. Both of the submodels of the in-package chemistry model are film models in contrast to past in-package chemistry models where all of the waste package pore space was filled with water. The current in-package

Advancements in meat packaging.

Science.gov (United States)

McMillin, Kenneth W

2017-10-01

Packaging of meat provides the same or similar benefits for raw chilled and processed meats as other types of food packaging. Although air-permeable packaging is most prevalent for raw chilled red meat, vacuum and modified atmosphere packaging offer longer shelf life. The major advancements in meat packaging have been in the widely used plastic polymers while biobased materials and their integration into composite packaging are receiving much attention for functionality and sustainability. At this time, active and intelligent packaging are not widely used for antioxidant, antimicrobial, and other functions to stabilize and enhance meat properties although many options are being developed and investigated. The advances being made in nanotechnology will be incorporated into food packaging and presumably into meat packaging when appropriate and useful. Intelligent packaging using sensors for transmission of desired information and prompting of subsequent changes in packaging materials, environments or the products to maintain safety and quality are still in developmental stages. Copyright © 2017 Elsevier Ltd. All rights reserved.

Color in packaging design : Case: ZheJiang JinSheng packaging Co,Ltd

OpenAIRE

Hu, Cuicui

2010-01-01

Color occupies an important position in packaging design, with the improvement of living standard, the higher requirement of color design in packaging. The aim of this thesis was to discuss key issues concerning aesthetics of packaging design. Topics will include an overview of the packaging design, the influence factor of packaging design, and introduce the aesthetics from packaging aspect. This thesis will also identify common problems of the production process, and list the phases of ho...

Packaging for Sustainability

CERN Document Server

Lewis, Helen; Fitzpatrick, Leanne

2012-01-01

The packaging industry is under pressure from regulators, customers and other stakeholders to improve packaging’s sustainability by reducing its environmental and societal impacts. This is a considerable challenge because of the complex interactions between products and their packaging, and the many roles that packaging plays in the supply chain. Packaging for Sustainability is a concise and readable handbook for practitioners who are trying to implement sustainability strategies for packaging. Industry case studies are used throughout the book to illustrate possible applications and scenarios. Packaging for Sustainability draws on the expertise of researchers and industry practitioners to provide information on business benefits, environmental issues and priorities, environmental evaluation tools, design for environment, marketing strategies, and challenges for the future.

CDIAC catalog of numeric data packages and computer model packages

International Nuclear Information System (INIS)

Boden, T.A.; Stoss, F.W.

1993-05-01

The Carbon Dioxide Information Analysis Center acquires, quality-assures, and distributes to the scientific community numeric data packages (NDPs) and computer model packages (CMPs) dealing with topics related to atmospheric trace-gas concentrations and global climate change. These packages include data on historic and present atmospheric CO 2 and CH 4 concentrations, historic and present oceanic CO 2 concentrations, historic weather and climate around the world, sea-level rise, storm occurrences, volcanic dust in the atmosphere, sources of atmospheric CO 2 , plants' response to elevated CO 2 levels, sunspot occurrences, and many other indicators of, contributors to, or components of climate change. This catalog describes the packages presently offered by CDIAC, reviews the processes used by CDIAC to assure the quality of the data contained in these packages, notes the media on which each package is available, describes the documentation that accompanies each package, and provides ordering information. Numeric data are available in the printed NDPs and CMPs, in CD-ROM format, and from an anonymous FTP area via Internet. All CDIAC information products are available at no cost

Waste package performance assessment

International Nuclear Information System (INIS)

Lester, D.H.

1981-01-01

This paper describes work undertaken to assess the life-expectancy and post-failure nuclide release behavior of high-level and waste packages in a geologic repository. The work involved integrating models of individual phenomena (such as heat transfer, corrosion, package deformation, and nuclide transport) and using existing data to make estimates of post-emplacement behavior of waste packages. A package performance assessment code was developed to predict time to package failure in a flooded repository and subsequent transport of nuclides out of the leaking package. The model has been used to evaluate preliminary package designs. The results indicate, that within the limitation of model assumptions and data base, packages lasting a few hundreds of years could be developed. Very long lived packages may be possible but more comprehensive data are needed to confirm this

Edible packaging materials.

Science.gov (United States)

Janjarasskul, Theeranun; Krochta, John M

2010-01-01

Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

Reliability of CGA/LGA/HDI Package Board/Assembly (Final Report)

Science.gov (United States)

Ghaffaroam. Reza

2014-01-01

Package manufacturers are now offering commercial-off-the-shelf column grid array (COTS CGA) packaging technologies in high-reliability versions. Understanding the process and quality assurance (QA) indicators for reliability are important for low-risk insertion of these advanced electronics packages. The previous reports, released in January of 2012 and January of 2013, presented package test data, assembly information, and reliability evaluation by thermal cycling for CGA packages with 1752, 1517, 1509, and 1272 inputs/outputs (I/Os) and 1-mm pitch. It presented the thermal cycling (-55C either 100C or 125C) test results for up to 200 cycles. This report presents up to 500 thermal cycles with quality assurance and failure analysis evaluation represented by optical photomicrographs, 2D real time X-ray images, dye-and-pry photomicrographs, and optical/scanning electron Microscopy (SEM) cross-sectional images. The report also presents assembly challenge using reflowing by either vapor phase or rework station of CGA and land grid array (LGA) versions of three high I/O packages both ceramic and plastic configuration. A new test vehicle was designed having high density interconnect (HDI) printed circuit board (PCB) with microvia-in-pad to accommodate both LGA packages as well as a large number of fine pitch ball grid arrays (BGAs). The LGAs either were assembled onto HDI PCB as an LGA or were solder paste print and reflow first to form solder dome on pads before assembly. Both plastic BGAs with 1156 I/O and ceramic LGAs were assembled. It also presented the X-ray inspection results as well as failures due to 200 thermal cycles. Lessons learned on assembly of ceramic LGAs are also presented.

Active Packaging Coatings

Directory of Open Access Journals (Sweden)

Luis J. Bastarrachea

2015-11-01

Full Text Available Active food packaging involves the packaging of foods with materials that provide an enhanced functionality, such as antimicrobial, antioxidant or biocatalytic functions. This can be achieved through the incorporation of active compounds into the matrix of the commonly used packaging materials, or by the application of coatings with the corresponding functionality through surface modification. The latter option offers the advantage of preserving the packaging materials’ bulk properties nearly intact. Herein, different coating technologies like embedding for controlled release, immobilization, layer-by-layer deposition, and photografting are explained and their potential application for active food packaging is explored and discussed.

Design, development and production of the TNF-XI new powder package

International Nuclear Information System (INIS)

Naigeon, P.; Brut, S.; Fujiwara, T.; Cohen, M.E.

2004-01-01

The TNF-XI was jointly developed by COGEMA LOGISTICS of France and Nuclear Fuel Industries, Ltd. (NFI) of Japan. The design and development of this package were started in 2000 and it was first used in 2003. The package design was based on the COGEMA LOGISTICS TN trademark UO2 package, which is cylindrical. To optimize the use of space and to facilitate operations, the TNF-XI incorporates four cavities. Each cavity is similar to one TN trademark U02. The overall shape of the package is approximately a one-meter cube, which allows it to be easily arranged and stacked in a transport container. It has a total weight of nearly 1 metric ton when loaded with 300 kg of uraniferous oxide material. The powder (or pellets) is placed inside NFI pails, and three pails are placed inside each cavity. The test results and analyses were documented in the French, Japanese, and United States 'Safety Analysis Reports' in order to get approvals in these countries. Additionally, the French license was validated in other countries. The 'Safety Analysis Reports' were prepared by COGEMA LOGISTICS in France, NFI in Japan and PACKAGING TECHNOLOGY, Inc. in the USA. In order to transform the TNF-XI design into a fleet of 800 packagings, a successful mass production process had to be developed and put into place by COGEMA LOGISTICS and the fabricator MECAGEST. Adopting mass production methods was challenging - not only because of the large quantity of packages, but also because of the rate of production (50 units per month minimum), quality requirements and the need to keep low packaging costs. This resulted in a significant challenge for mass producing the packaging: what was needed was a robust, efficient, and well-organized process. During the development of the manufacturing process, we also worked on shortening the learning curve

Budgeted Interactive Learning

Science.gov (United States)

2017-06-15

2, and 3). The selection scheme is implemented and released as an open-source active learning package. They have studied theories for designing...We have studied theories for designing algorithms for interactive learning with batch-like feedback (for 1) and algorithms for online digestion of... necessity on pre-training. The new idea provides layer-wise cost estimation with auxiliary nodes, and is applicable to a wider range of deep learning

Safety Analysis Report for packaging (onsite) steel waste package

International Nuclear Information System (INIS)

BOEHNKE, W.M.

2000-01-01

The steel waste package is used primarily for the shipment of remote-handled radioactive waste from the 324 Building to the 200 Area for interim storage. The steel waste package is authorized for shipment of transuranic isotopes. The maximum allowable radioactive material that is authorized is 500,000 Ci. This exceeds the highway route controlled quantity (3,000 A 2 s) and is a type B packaging

PRIDE Surveillance Projects Data Packaging Project Information Package Specification Version 1.1

Energy Technology Data Exchange (ETDEWEB)

Kelleher, D. M.; Shipp, R. L.; Mason, J. D.

2010-08-31

Information Package Specification version 1.1 describes an XML document format called an information package that can be used to store information in information management systems and other information archives. An information package consists of package information, the context required to understand and use that information, package metadata that describes the information, and XML signatures that protect the information. The information package described in this specification was designed to store Department of Energy (DOE) and National Nuclear Security Administration (NNSA) information and includes the metadata required for that information: a unique package identifier, information marking that conforms to DOE and NNSA requirements, and access control metadata. It is an implementation of the Open Archival Information System (OAIS) Reference Model archival information package tailored to meet NNSA information storage requirements and designed to be used in the computing environments at the Y-12 National Security Complex and at other NNSA sites.

HPLOT: the graphics interface package for the HBOOK histogramming package

International Nuclear Information System (INIS)

Watkins, H.

1978-01-01

The subroutine package HPLOT described in this report, enables the CERN histogramming package HBOOK to produce high-quality pictures by means of high-resolution devices such as plotters. HPLOT can be implemented on any scientific computing system with a Fortran IV compiler and can be interfaced with any graphics package; spectral routines in addition to the basic ones enable users to embellish their histograms. Examples are also given of the use of HPLOT as a graphics package for plotting simple pictures without histograms. (Auth.)

Package

Directory of Open Access Journals (Sweden)

Arsić Zoran

2013-01-01

Full Text Available It is duty of the seller to pack the goods in a manner which assures their safe arrival and enables their handling in transit and at the place of destination. The problem of packing is relevant in two main respects. First of all the buyer is in certain circumstances entitled to refuse acceptance of the goods if they are not properly packed. Second, the package is relevant to calculation of price and freight based on weight. In the case of export trade, the package should conform to the legislation in the country of destination. The impact of package on environment is regulated by environment protection regulation of Republic if Serbia.

EpiModel: An R Package for Mathematical Modeling of Infectious Disease over Networks.

Science.gov (United States)

Jenness, Samuel M; Goodreau, Steven M; Morris, Martina

2018-04-01

Package EpiModel provides tools for building, simulating, and analyzing mathematical models for the population dynamics of infectious disease transmission in R. Several classes of models are included, but the unique contribution of this software package is a general stochastic framework for modeling the spread of epidemics on networks. EpiModel integrates recent advances in statistical methods for network analysis (temporal exponential random graph models) that allow the epidemic modeling to be grounded in empirical data on contacts that can spread infection. This article provides an overview of both the modeling tools built into EpiModel , designed to facilitate learning for students new to modeling, and the application programming interface for extending package EpiModel , designed to facilitate the exploration of novel research questions for advanced modelers.

Packaging-radiation disinfestation relationships

International Nuclear Information System (INIS)

Highland, H.A.

1985-01-01

Foods that are susceptible to insect infestation can be irradiated to destroy the infestation; however, the food must be kept essentially insect-free until consumed, or it must be disinfested again, perhaps repeatedly. Insect-resistant packages can be used to prevent reinfestation, but there are certain requirements that must be fulfilled before a package can be made insect resistant. These include the use of insect-light construction and packaging materials that resist boring insects. The relative insect resistance of various packages and packaging materials is discussed, as are behavior traits such as egressive boring that enables insects to escape from packages and the ability of insects to climb on various packaging materials. Some successful and unsuccessful attempts to make various types of packages insect resistant are discussed, as are factors that must be considered in the selection or development of insect-resistant packages for radiation disinfested foods. The latter factors include biological and physical environments, length of storage periods, stresses on packages during shipment, types of storage facilities, governmental regulations, health requirements, and others

The triple line pattern on carotid intima media thickness imaging and its relationship to cardiovascular risk factors in patients on lipid lowering therapy

Directory of Open Access Journals (Sweden)

Singh TA

2014-06-01

Full Text Available Tania A Singh,1 Todd C Villines,2 Allen J Taylor31Division of Cardiology, Medstar Georgetown University Hospital, 2Walter Reed National Military Medical Center, Bethesda, MD, 3Georgetown University School of Medicine, Washington, DC, USA Background: Carotid intima media thickness (CIMT infrequently identifies a triple line pattern (TLP in the visualization of the internal elastic lamina. We examined the prevalence and predictors of the TLP among a consecutive series of subjects enrolled in a CIMT clinical trial, and also the effects of lipid lowering therapy.Methods: Baseline CIMT studies of subjects with known heart disease, or high risk for heart disease, were evaluated from a single site of the Arterial Biology for the Investigation of the Treatment Effects of Reducing Cholesterol 6-HDL and LDL Treatment Strategies in Atherosclerosis trial (N=120. One sonographer obtained four views of the right and left far wall common CIMT, using a 13 MHz ultrasound probe. Images were blindly reviewed for the presence of the TLP. The TLP was defined as absent (0, possible (1, or definite (2. A composite score from all four views was calculated. A patient was defined as having the TLP if the composite score was ≥4. Univariate predictors of the TLP were explored. Follow-up ultrasounds at 14 months were also reviewed for presence of the TLP.Results: The prevalence of the TLP at baseline was 22.5%. Among cardiovascular risk variables, systolic blood pressure was significantly higher in subjects displaying the TLP (141.3±15.6 mmHg versus 133.1±18.4 mmHg; P=0.036. There were no differences among those with, and without, the TLP, with respect to other cardiovascular risk variables (age, sex, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, C-reactive protein, glucose, weight, waist girth, tobacco use, medications, quantitative CIMT, or image quality. During ongoing lipid lowering therapy, the prevalence of the TLP increased to 54

Packaging Printing Today

Directory of Open Access Journals (Sweden)

Stanislav Bolanča

2015-12-01

Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

Packaged die heater

Science.gov (United States)

Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

2011-06-21

A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

Safety Analysis Report for packaging (onsite) steel waste package

Energy Technology Data Exchange (ETDEWEB)

BOEHNKE, W.M.

2000-07-13

The steel waste package is used primarily for the shipment of remote-handled radioactive waste from the 324 Building to the 200 Area for interim storage. The steel waste package is authorized for shipment of transuranic isotopes. The maximum allowable radioactive material that is authorized is 500,000 Ci. This exceeds the highway route controlled quantity (3,000 A{sub 2}s) and is a type B packaging.

Packaging Printing Today

OpenAIRE

Stanislav Bolanča; Igor Majnarić; Kristijan Golubović

2015-01-01

Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. T...

Enabling robots to make use of the structure of human actions - a user study employing Acoustic Packaging

NARCIS (Netherlands)

Lohse, M.; Wrede, Britta; Schillingmann, Lars

2013-01-01

Human learning strongly depends on the ability to structure the actions of teachers in order to identify relevant parts. We propose that this is also true for learning in robots. Therefore, we apply a method for multimodal action segmentation called Acoustic Packaging to a corpus of pairs of users

Thermal Management of Power Semiconductor Packages - Matching Cooling Technologies with Packaging Technologies (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Bennion, K.; Moreno, G.

2010-04-27

Heat removal for power semiconductor devices is critical for robust operation. Because there are different packaging options, different thermal management technologies, and a range of applications, there is a need for a methodology to match cooling technologies and package configurations to target applications. To meet this need, a methodology was developed to compare the sensitivity of cooling technologies on the overall package thermal performance over a range of power semiconductor packaging configurations. The results provide insight into the trade-offs associated with cooling technologies and package configurations. The approach provides a method for comparing new developments in power semiconductor packages and identifying potential thermal control technologies for the package. The results can help users select the appropriate combination of packaging configuration and cooling technology for the desired application.

Packaging- and transportation-related occurrence reports. Fiscal year 1996 annual report

International Nuclear Information System (INIS)

Dickerson, L.S.; Welch, M.J.

1997-02-01

The Oak Ridge National Laboratory (ORNL), through its support to the US Department of Energy's (DOE's) Office of Transportation, Emergency Management, and Analytical Services (EM-76), retrieves reports and information pertaining to transportation and packaging occurrences from the centralized Occurrence Reporting and Processing System (ORPS) database. These selected reports are analyzed for trends, impact on packaging and transportation operations and safety concerns, and lessons learned (LL) in transportation and packaging safety. Some selected reports are reviewed to evaluate the corrective actions being conducted. This report contains an analysis of 246 occurrences identified as packaging- or transportation-related during fiscal year (FY) 1996, with supporting data from calendar year (CY) 1991 through 1995 which provide the basis for trending. The overall number of packaging- and transportation-related occurrences remains a small percentage of the total occurrences in the DOE system, through it is relatively higher this year (∼6%) than previous years when transportation occurrences were approximately 3% of the total. The decrease in the total number of occurrences may be the result of the rollup provisions of the new DOE Order 232.1, and the comparative increase in packaging- and transportation-related occurrence reports (ORs) is only a reflection of the decrease in the overall total. There does not appear to be a correlation between the total number of offsite hazardous materials shipments and the number of reported occurrences. The offsite occurrences, while few in number, are consistent for the major shippers and contractors

NRF TRIGA packaging

International Nuclear Information System (INIS)

Clements, M.D.

1995-11-01

Training Reactor Isotopes, General Atomics (TRIGA reg-sign) Reactors are in use at four US Department of Energy (DOE) complex facilities and at least 23 university, commercial, or government facilities. The development of the Neutron Radiography Facility (NRF) TRIGA packaging system began in October 1993. The Hanford Site NRF is being shut down and requires an operationally user-friendly transportation and storage packaging system for removal of the TRIGA fuel elements. The NRF TRIGA packaging system is designed to remotely remove the fuel from the reactor and transport the fuel to interim storage (up to 50 years) on the Hanford Site. The packaging system consists of a cask and an overpack. The overpack is used only for transport and is not necessary for storage. Based upon the cask's small size and light weight, small TRIGA reactors will find it versatile for numerous refueling and fuel storage needs. The NRF TRIGA packaging design also provides the basis for developing a certifiable and economical packaging system for other TRIGA reactor facilities. The small size of the NRF TRIGA cask also accommodates placing the cask into a larger certified packaging for offsite transport. The Westinghouse Hanford Company NRF TRIGA packaging, as described herein can serve other DOE sites for their onsite use, and the design can be adapted to serve university reactor facilities, handling a variety of fuel payloads

Advanced Spacesuit Portable Life Support System Packaging Concept Mock-Up Design & Development

Science.gov (United States)

O''Connell, Mary K.; Slade, Howard G.; Stinson, Richard G.

1998-01-01

A concentrated development effort was begun at NASA Johnson Space Center to create an advanced Portable Life Support System (PLSS) packaging concept. Ease of maintenance, technological flexibility, low weight, and minimal volume are targeted in the design of future micro-gravity and planetary PLSS configurations. Three main design concepts emerged from conceptual design techniques and were carried forth into detailed design, then full scale mock-up creation. "Foam", "Motherboard", and "LEGOtm" packaging design concepts are described in detail. Results of the evaluation process targeted maintenance, robustness, mass properties, and flexibility as key aspects to a new PLSS packaging configuration. The various design tools used to evolve concepts into high fidelity mock ups revealed that no single tool was all encompassing, several combinations were complimentary, the devil is in the details, and, despite efforts, many lessons were learned only after working with hardware.

Thaumatin-like proteins are differentially expressed and localized in phloem tissues of hybrid poplar

Directory of Open Access Journals (Sweden)

Dafoe Nicole J

2010-08-01

Full Text Available Abstract Background Two thaumatin-like proteins (TLPs were previously identified in phloem exudate of hybrid poplar (Populus trichocarpa × P. deltoides using proteomics methods, and their sieve element localization confirmed by immunofluorescence. In the current study, we analyzed different tissues to further understand TLP expression and localization in poplar, and used immunogold labelling to determine intracellular localization. Results Immunofluorescence using a TLP antiserum confirmed the presence of TLP in punctate, organelle-like structures within sieve elements. On western blots, the antiserum labeled two constitutively expressed proteins with distinct expression patterns. Immunogold labelling suggested that TLPs are associated with starch granules and starch-containing plastids in sieve elements and phloem parenchyma cells. In addition, the antiserum recognized TLPs in the inner cell wall and sieve plate region of sieve elements. Conclusions TLP localization in poplar cells and tissues is complex. TLP1 is expressed predominantly in tissues with a prominent vascular system such as midveins, petioles and stems, whereas the second TLP is primarily expressed in starch-storing plastids found in young leaves and the shoot apex.

Packaging for Food Service

Science.gov (United States)

Stilwell, E. J.

1985-01-01

Most of the key areas of concern in packaging the three principle food forms for the space station were covered. It can be generally concluded that there are no significant voids in packaging materials availability or in current packaging technology. However, it must also be concluded that the process by which packaging decisions are made for the space station feeding program will be very synergistic. Packaging selection will depend heavily on the preparation mechanics, the preferred presentation and the achievable disposal systems. It will be important that packaging be considered as an integral part of each decision as these systems are developed.

Waste Package Lifting Calculation

International Nuclear Information System (INIS)

H. Marr

2000-01-01

The objective of this calculation is to evaluate the structural response of the waste package during the horizontal and vertical lifting operations in order to support the waste package lifting feature design. The scope of this calculation includes the evaluation of the 21 PWR UCF (pressurized water reactor uncanistered fuel) waste package, naval waste package, 5 DHLW/DOE SNF (defense high-level waste/Department of Energy spent nuclear fuel)--short waste package, and 44 BWR (boiling water reactor) UCF waste package. Procedure AP-3.12Q, Revision 0, ICN 0, calculations, is used to develop and document this calculation

Effectiveness of a Constructivistic Multimedia-Learning Package on Shaping and Guiding Students' Attitudes Toward Physics

Directory of Open Access Journals (Sweden)

Divya C. Senan

2016-06-01

Full Text Available Physics is considered by some to be the most perplexing area in the sciences and perceived as a hard subject for students from secondary school to the university to adult-graduate education. Educational research has provided evidence that attitudes towards physics change with exposure to it. When students have negative attitudes towards physics, they often do not "like" physics courses or the teachers of those courses. Based on this premise, numerous studies have been conducted to determine the factors that affect students' attitudes towards physics. A goal that is important to most if not all teachers of physics courses is to inspire students to have a positive attitude towards the subject. This goal encompasses an appreciation of how physicists think and how they incorporate the values that it provides, as well as, how it is applied to other areas or related fields, and its application in everyday life. In this regard, the aim of this investigation has been to explore how to impact more effectively positive students' attitudes in physics courses. To that end, we report the effectiveness of a constructivistic multimedia-learning package (MLP in shaping and guiding students' attitudes towards physics.

Certification of packagings: compliance with DOT specification 7A packaging requirements

International Nuclear Information System (INIS)

Edling, D.A.

1976-01-01

A study was conducted to determine which of the packagings currently listed in CFR 49 Section 173.395 a.1-5, meet the Specification 7A requirements (CFR 49 Section 173.350). According to DOT HM-111 the present listing of various authorized DOT specifications in Section 173.394 and Section 173.395 (Type A containers) of ICC Tariff No. 27 would be deleted with complete reliance being placed on the use of DOT 7A, Type A general packaging specification. Each user of a Specification 7A package would be required to document and maintain on file for one year a written record of his determination of compliance with the DOT Specification 7A performance requirements. All the specification packagings listed in CFR 49 Section 173.395a.1-5 were tested and shown to meet the Specification 7A criteria; however, in many cases qualifications were placed on their use. Forty-nine specification packagings were tested and shown to meet the DOT Specification 7A performance requirements and since there were several styles of some specific packagings, this amounts to greater than 80 packagings. The extensive testing generally indicated a high degree of containment integrity in the packagings tested and the documentation discussed is a valuable tool for shippers of Type A quantities of radioactive materials

Learnings from LCA-based methods: should chemicals in food packaging be a priority focus to protect human health?

DEFF Research Database (Denmark)

Ernstoff, Alexi; Stylianou, Katerina S.; Fantke, Peter

2017-01-01

Given the scale and variety of human health damage (HHD) caused by food systems, prioritization methods are urgently needed. In this study HHD is estimated for case studies on red meat and sugary sweetened beverages (SSB) packaged in high-impact polystyrene (HIPS) due to various relevant health...... impacts. Specifically, we aim to asses if chemicals in food packaging are important to HHD in a life cycle context. The functional unit is "daily consumption of a packaged food per person in the United States." Method developments focus on human toxicity characterization of chemicals migrating from...... packaging into food. Chemicals and their concentrations in HIPS were identified from regulatory lists. A new high-throughput model estimated migration into food, depending on properties of chemicals, packaging, food, and scenario, and HHD was extrapolated following LCA characterization methods. An LCA...

Anhydrous Ammonia Training Module. Trainer's Package. Participant's Package.

Science.gov (United States)

Beaudin, Bart; And Others

This document contains a trainer's and a participant's package for teaching employees on site safe handling procedures for working with anhydrous ammonia, especially on farms. The trainer's package includes the following: a description of the module; a competency; objectives; suggested instructional aids; a training outline (or lesson plan) for…

Green Packaging Development. : A way to efficient, effective and more environmental friendly packaging solutions.

OpenAIRE

Mian Muhammad, Masoud

2011-01-01

Growing pressure on the packaging design to enhance the environmental and logistics performance of a packaging system stresses the packaging designers to search new design strategies that not only fulfill logistics requirements in the supply chain, but also reduce the CO 2emissions during the packaging life cycle. This thesis focuses on the packaging design process and suggests some improvements by considering its logistics performance and CO 2emissions. A Green packaging development model wa...

IN-PACKAGE CHEMISTRY ABSTRACTION

Energy Technology Data Exchange (ETDEWEB)

E. Thomas

2005-07-14

This report was developed in accordance with the requirements in ''Technical Work Plan for Postclosure Waste Form Modeling'' (BSC 2005 [DIRS 173246]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as a function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model, which uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model, which is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials, and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed (CDSP) waste packages containing high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor diffusing into the waste package, and (2) seepage water entering the waste package as a liquid from the drift. (1) Vapor-Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H{sub 2}O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Liquid-Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package.

IN-PACKAGE CHEMISTRY ABSTRACTION

International Nuclear Information System (INIS)

E. Thomas

2005-01-01

This report was developed in accordance with the requirements in ''Technical Work Plan for Postclosure Waste Form Modeling'' (BSC 2005 [DIRS 173246]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as a function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model, which uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model, which is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials, and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed (CDSP) waste packages containing high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor diffusing into the waste package, and (2) seepage water entering the waste package as a liquid from the drift. (1) Vapor-Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H 2 O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Liquid-Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package

PWR internals segmentation and packaging experience in the U.S

International Nuclear Information System (INIS)

Kreitman, P.J.

2008-01-01

Seven commercial nuclear power plants of the Pressurized Water Reactor (PWR) design have been permanently shut down in the US to date. Six of these plants have been decommissioned using dismantling methods. The remaining plant, Indian Point 1, located in Buchanan, NY, has been placed in Safe Storage. Of the six dismantled plants, five underwent extensive segmentation, separation, and packaging of their internal components to allow removal and disposal of the reactor vessel assembly. Only the Trojan Plant in Portland, Oregon, was able to ship the reactor vessel assembly with its internals intact to the final disposal site near Richland, Washington. An important part of the planning for the upcoming decommissioning of similar plants in Europe such as Chooz A in France and Zorita in Spain will be to study the lessons learned from the US efforts and apply the best practices to future projects. This paper will chronicle the evolution of the reactor internals segmentation and packaging process to date, including the planning, methodology, equipment, waste management, and packaging strategy. (author)

Hazardous materials package performance regulations

International Nuclear Information System (INIS)

Russell, N.A.; Glass, R.E.; McClure, J.D.; Finley, N.C.

1992-01-01

The hazardous materials (hazmat) packaging development and certification process is currently defined by two different regulatory philosophies, one based on specification packagings and the other based on performance standards. With specification packagings, a packaging is constructed according to an agreed set of design specifications. In contrast, performance standards do not specify the packaging design; they specify performance standards that a packaging design must be able to pass before it can be certified for transport. The packaging can be designed according to individual needs as long as it meets these performance standards. Performance standards have been used nationally and internationally for about 40 years to certify radioactive materials (RAM) packagings. It is reasonable to state that for RAM transport, performance specifications have maintained transport safety. A committee of United Nation's experts recommended the performance standard philosophy as the preferred regulation method for hazmat packaging. Performance standards for hazmat packagings smaller than 118 gallons have been adopted in 49CFR178. Packagings for materials that are classified as toxic-by-inhalation must comply with the performance standards by October 1, 1993, and packagings for all other classes of hazardous materials covered must comply by October 1, 1996. For packages containing bulk (in excess of 188 gallons) quantities of materials that are extremely toxic by inhalation, there currently are no performance requirements. This paper discusses a Hazmat Packaging Performance Evaluation (HPPE) project to look at the subset of bulk packagings that are larger than 2000 gallons. The objectives of this project are the evaluate current hazmat specification packagings and develop supporting documentation for determining performance requirements for packagings in excess of 2000 gallons that transport hazardous materials that have been classified as extremely toxic by inhalation (METBI)

Lithium niobate packaging challenges

International Nuclear Information System (INIS)

Murphy, E.J.; Holmes, R.J.; Jander, R.B.; Schelling, A.W.

1988-01-01

The use of lithium niobate integrated optic devices outside of the research laboratory is predicated on the development of a sound packaging method. The authors present a discussion of the many issues that face the development of a viable, robust packaging technology. The authors emphasize the interaction of lithium niobate's physical properties with available packaging materials and technologies. The broad range of properties (i.e. electro-optic, piezo-electric, pyro-electric, photorefractive...) that make lithium niobate an interesting material in many device applications also make it a packaging challenge. The package design, materials and packaging technologies must isolate the device from the environment so that lithium niobate's properties do not adversely affect the device performance

User friendly packaging

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

2010-01-01

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...... “User-friendly Packaging” aims to create a platform for developing more user-friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?...

A pilot randomised controlled trial to assess the utility of an e-learning package that trains users in adverse drug reaction causality.

Science.gov (United States)

Conroy, Elizabeth J; Kirkham, Jamie J; Bellis, Jennifer R; Peak, Matthew; Smyth, Rosalind L; Williamson, Paula R; Pirmohamed, Munir

2015-12-01

Causality assessment of adverse drug reactions (ADRs) by healthcare professionals is often informal which can lead to inconsistencies in practice. The Liverpool Causality Assessment Tool (LCAT) offers a systematic approach. An interactive, web-based, e-learning package, the Liverpool ADR Causality Assessment e-learning Package (LACAeP), was designed to improve causality assessment using the LCAT. This study aimed to (1) get feedback on usability and usefulness on the LACAeP, identify areas for improvement and development, and generate data on effect size to inform a larger scale study; and (2) test the usability and usefulness of the LCAT. A pilot, single-blind, parallel-group, randomised controlled trial hosted by the University of Liverpool was undertaken. Participants were paediatric medical trainees at specialty training level 1+ within the Mersey and North-West England Deaneries. Participants were randomised (1 : 1) access to the LACAeP or no training. The primary efficacy outcome was score by correct classification, predefined by a multidisciplinary panel of experts. Following participation, feedback on both the LCAT and the LACAeP was obtained, via a built in survey, from participants. Of 57 randomised, 35 completed the study. Feedback was mainly positive although areas for improvement were identified. Seventy-four per cent of participants found the LCAT easy to use and 78% found the LACAeP training useful. Sixty-one per cent would be unlikely to recommend the training. Scores ranged from 4 to 13 out of 20. The LACAeP increased scores by 1.3, but this was not significant. Improving the LACAeP before testing it in an appropriately powered trial, informed by the differences observed, is required. Rigorous evaluation will enable a quality resource that will be of value in healthcare professional training. © 2015 The Authors. International Journal of Pharmacy Practice published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society.

GT-SUPREEM: the Georgia Tech summer undergraduate packaging research and engineering experience for minorities

Science.gov (United States)

May, Gary S.

1996-07-01

The Georgia Tech SUmmer Undergraduate Packaging Research and Engineering Experience for Minorities (GT-SUPREEM) is an eight-week summer program designed to attract qualified minority students to pursue graduate degrees in packaging- related disciplines. The program is conducted under the auspices of the Georgia Tech Engineering Research Center in Low-Cost Electronic Packaging, which is sponsored by the National Science Foundation. In this program, nine junior and senior level undergraduate students are selected on a nationwide basis and paired with a faculty advisor to undertake research projects in the Packaging Research CEnter. The students are housed on campus and provided with a $DLR3,000 stipend and a travel allowance. At the conclusion of the program, the students present both oral and written project summaries. It is anticipated that this experience will motivate these students to become applicants for graduate study in ensuring years. This paper will provide an overview of the GT-SUPREEM program, including student research activities, success stories, lessons learned, and overall program outlook.

Packaging Review Guide for Reviewing Safety Analysis Reports for Packagings

Energy Technology Data Exchange (ETDEWEB)

DiSabatino, A; Biswas, D; DeMicco, M; Fisher, L E; Hafner, R; Haslam, J; Mok, G; Patel, C; Russell, E

2007-04-12

This Packaging Review Guide (PRG) provides guidance for Department of Energy (DOE) review and approval of packagings to transport fissile and Type B quantities of radioactive material. It fulfills, in part, the requirements of DOE Order 460.1B for the Headquarters Certifying Official to establish standards and to provide guidance for the preparation of Safety Analysis Reports for Packagings (SARPs). This PRG is intended for use by the Headquarters Certifying Official and his or her review staff, DOE Secretarial offices, operations/field offices, and applicants for DOE packaging approval. This PRG is generally organized at the section level in a format similar to that recommended in Regulatory Guide 7.9 (RG 7.9). One notable exception is the addition of Section 9 (Quality Assurance), which is not included as a separate chapter in RG 7.9. Within each section, this PRG addresses the technical and regulatory bases for the review, the manner in which the review is accomplished, and findings that are generally applicable for a package that meets the approval standards. This Packaging Review Guide (PRG) provides guidance for DOE review and approval of packagings to transport fissile and Type B quantities of radioactive material. It fulfills, in part, the requirements of DOE O 460.1B for the Headquarters Certifying Official to establish standards and to provide guidance for the preparation of Safety Analysis Reports for Packagings (SARPs). This PRG is intended for use by the Headquarters Certifying Official and his review staff, DOE Secretarial offices, operations/field offices, and applicants for DOE packaging approval. The primary objectives of this PRG are to: (1) Summarize the regulatory requirements for package approval; (2) Describe the technical review procedures by which DOE determines that these requirements have been satisfied; (3) Establish and maintain the quality and uniformity of reviews; (4) Define the base from which to evaluate proposed changes in scope

DNA Packaging by λ-Like Bacteriophages: Mutations Broadening the Packaging Specificity of Terminase, the λ-Packaging Enzyme

OpenAIRE

Feiss, Michael; Reynolds, Erin; Schrock, Morgan; Sippy, Jean

2010-01-01

The DNA-packaging specificities of phages λ and 21 depend on the specific DNA interactions of the small terminase subunits, which have support helix-turn-recognition helix-wing DNA-binding motifs. λ-Terminase with the recognition helix of 21 preferentially packages 21 DNA. This chimeric terminase's ability to package λDNA is reduced ∼20-fold. Phage λ with the chimeric terminase is unable to form plaques, but pseudorevertants are readily obtained. Some pseudorevertants have trans-acting suppre...

The paradox of packaging optimization – a characterization of packaging source reduction in the Netherlands

NARCIS (Netherlands)

van Sluisveld, M.A.E.; Worrell, E.

2013-01-01

The European Council Directive 94/62/EC for Packaging and Packaging Waste requires that Member States implement packaging waste prevention measures. However, consumption and subsequently packaging waste figures are still growing annually. It suggests that policies to accomplish packaging waste

Building the Capability of Non-Formal Education Teachers to Develop a Learning Society for Promoting Lifelong Education in Thailand

Science.gov (United States)

Sungsri, Sumalee

2018-01-01

This study aims to study Thai non-formal education teachers' perceptions of their opportunities to obtain knowledge about the learning society; identify the knowledge of non-formal education teachers need about the learning society which could be obtained through a distance learning package; and to develop and evaluate distance learning package on…

Fostering students’ thinking skill and social attitude through STAD cooperative learning technique on tenth grade students of chemistry class

Science.gov (United States)

Kriswintari, D.; Yuanita, L.; Widodo, W.

2018-04-01

The aim of this study was to develop chemistry learning package using Student Teams Achievement Division (STAD) cooperative learning technique to foster students’ thinking skills and social attitudes. The chemistry learning package consisting of lesson plan, handout, students’ worksheet, thinking skill test, and observation sheet of social attitude was developed using the Dick and Carey model. Research subject of this study was chemistry learning package using STAD which was tried out on tenth grade students of SMA Trimurti Surabaya. The tryout was conducted using the one-group pre-test post-test design. Data was collected through observation, test, and questionnaire. The obtained data were analyzed using descriptive qualitative analysis. The findings of this study revealed that the developed chemistry learning package using STAD cooperative learning technique was categorized valid, practice and effective to be implemented in the classroom to foster students’ thinking skill and social attitude.

Multiple Acid Sensors Control Helicobacter pylori Colonization of the Stomach.

Science.gov (United States)

Huang, Julie Y; Goers Sweeney, Emily; Guillemin, Karen; Amieva, Manuel R

2017-01-01

Helicobacter pylori's ability to respond to environmental cues in the stomach is integral to its survival. By directly visualizing H. pylori swimming behavior when encountering a microscopic gradient consisting of the repellent acid and attractant urea, we found that H. pylori is able to simultaneously detect both signals, and its response depends on the magnitudes of the individual signals. By testing for the bacteria's response to a pure acid gradient, we discovered that the chemoreceptors TlpA and TlpD are each independent acid sensors. They enable H. pylori to respond to and escape from increases in hydrogen ion concentration near 100 nanomolar. TlpD also mediates attraction to basic pH, a response dampened by another chemoreceptor TlpB. H. pylori mutants lacking both TlpA and TlpD (ΔtlpAD) are unable to sense acid and are defective in establishing colonization in the murine stomach. However, blocking acid production in the stomach with omeprazole rescues ΔtlpAD's colonization defect. We used 3D confocal microscopy to determine how acid blockade affects the distribution of H. pylori in the stomach. We found that stomach acid controls not only the overall bacterial density, but also the microscopic distribution of bacteria that colonize the epithelium deep in the gastric glands. In omeprazole treated animals, bacterial abundance is increased in the antral glands, and gland colonization range is extended to the corpus. Our findings indicate that H. pylori has evolved at least two independent receptors capable of detecting acid gradients, allowing not only survival in the stomach, but also controlling the interaction of the bacteria with the epithelium.

A cross-validation package driving Netica with python

Science.gov (United States)

Fienen, Michael N.; Plant, Nathaniel G.

2014-01-01

Bayesian networks (BNs) are powerful tools for probabilistically simulating natural systems and emulating process models. Cross validation is a technique to avoid overfitting resulting from overly complex BNs. Overfitting reduces predictive skill. Cross-validation for BNs is known but rarely implemented due partly to a lack of software tools designed to work with available BN packages. CVNetica is open-source, written in Python, and extends the Netica software package to perform cross-validation and read, rebuild, and learn BNs from data. Insights gained from cross-validation and implications on prediction versus description are illustrated with: a data-driven oceanographic application; and a model-emulation application. These examples show that overfitting occurs when BNs become more complex than allowed by supporting data and overfitting incurs computational costs as well as causing a reduction in prediction skill. CVNetica evaluates overfitting using several complexity metrics (we used level of discretization) and its impact on performance metrics (we used skill).

JGromacs: a Java package for analyzing protein simulations.

Science.gov (United States)

Münz, Márton; Biggin, Philip C

2012-01-23

In this paper, we introduce JGromacs, a Java API (Application Programming Interface) that facilitates the development of cross-platform data analysis applications for Molecular Dynamics (MD) simulations. The API supports parsing and writing file formats applied by GROMACS (GROningen MAchine for Chemical Simulations), one of the most widely used MD simulation packages. JGromacs builds on the strengths of object-oriented programming in Java by providing a multilevel object-oriented representation of simulation data to integrate and interconvert sequence, structure, and dynamics information. The easy-to-learn, easy-to-use, and easy-to-extend framework is intended to simplify and accelerate the implementation and development of complex data analysis algorithms. Furthermore, a basic analysis toolkit is included in the package. The programmer is also provided with simple tools (e.g., XML-based configuration) to create applications with a user interface resembling the command-line interface of GROMACS applications. JGromacs and detailed documentation is freely available from http://sbcb.bioch.ox.ac.uk/jgromacs under a GPLv3 license .

Prevention policies addressing packaging and packaging waste: Some emerging trends.

Science.gov (United States)

Tencati, Antonio; Pogutz, Stefano; Moda, Beatrice; Brambilla, Matteo; Cacia, Claudia

2016-10-01

Packaging waste is a major issue in several countries. Representing in industrialized countries around 30-35% of municipal solid waste yearly generated, this waste stream has steadily grown over the years even if, especially in Europe, specific recycling and recovery targets have been fixed. Therefore, an increasing attention starts to be devoted to prevention measures and interventions. Filling a gap in the current literature, this explorative paper is a first attempt to map the increasingly important phenomenon of prevention policies in the packaging sector. Through a theoretical sampling, 11 countries/states (7 in and 4 outside Europe) have been selected and analyzed by gathering and studying primary and secondary data. Results show evidence of three specific trends in packaging waste prevention policies: fostering the adoption of measures directed at improving packaging design and production through an extensive use of the life cycle assessment; raising the awareness of final consumers by increasing the accountability of firms; promoting collaborative efforts along the packaging supply chains. Copyright © 2016 Elsevier Ltd. All rights reserved.

Food packages for Space Shuttle

Science.gov (United States)

Fohey, M. F.; Sauer, R. L.; Westover, J. B.; Rockafeller, E. F.

1978-01-01

The paper reviews food packaging techniques used in space flight missions and describes the system developed for the Space Shuttle. Attention is directed to bite-size food cubes used in Gemini, Gemini rehydratable food packages, Apollo spoon-bowl rehydratable packages, thermostabilized flex pouch for Apollo, tear-top commercial food cans used in Skylab, polyethylene beverage containers, Skylab rehydratable food package, Space Shuttle food package configuration, duck-bill septum rehydration device, and a drinking/dispensing nozzle for Space Shuttle liquids. Constraints and testing of packaging is considered, a comparison of food package materials is presented, and typical Shuttle foods and beverages are listed.

In-Package Chemistry Abstraction

Energy Technology Data Exchange (ETDEWEB)

E. Thomas

2004-11-09

This report was developed in accordance with the requirements in ''Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package'' (BSC 2004 [DIRS 171583]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model that uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model that is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed waste packages that contain both high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor that diffuses into the waste package, and (2) seepage water that enters the waste package from the drift as a liquid. (1) Vapor Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H2O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Water Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package. TSPA-LA uses the vapor influx case for the nominal scenario for simulations where the waste

In-Package Chemistry Abstraction

International Nuclear Information System (INIS)

E. Thomas

2004-01-01

This report was developed in accordance with the requirements in ''Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package'' (BSC 2004 [DIRS 171583]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model that uses the EQ3/6 geochemistry-modeling tool, and a surface complexation model that is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed waste packages that contain both high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor that diffuses into the waste package, and (2) seepage water that enters the waste package from the drift as a liquid. (1) Vapor Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H2O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Water Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package. TSPA-LA uses the vapor influx case for the nominal scenario for simulations where the waste package has been

Radioactive material packaging performance testing

International Nuclear Information System (INIS)

Romano, T.; Cruse, J.M.

1991-02-01

To provide uniform packaging of hazardous materials on an international level, the United Nations has developed packaging recommendations that have been implemented worldwide. The United Nations packaging recommendations are performance oriented, allowing for a wide variety of package materials and systems. As a result of this international standard, efforts in the United States are being directed toward use of performance-oriented packaging and elimination of specification (designed) packaging. This presentation will focus on trends, design evaluation, and performance testing of radioactive material packaging. The impacts of US Department of Transportation Dockets HM-181 and HM-169A on specification and low-specific activity radioactive material packaging requirements are briefly discussed. The US Department of Energy's program for evaluating radioactive material packings per US Department of Transportation Specification 7A Type A requirements, is used as the basis for discussing low-activity packaging performance test requirements. High-activity package testing requirements are presented with examples of testing performed at the Hanford Site that is operated by Westinghouse Hanford Company for the US Department of Energy. 5 refs., 2 tabs

Experimental and theoretical analyses of package-on-package structure under three-point bending loading

International Nuclear Information System (INIS)

Jia Su; Wang Xi-Shu; Ren Huai-Hui

2012-01-01

High density packaging is developing toward miniaturization and integration, which causes many difficulties in designing, manufacturing, and reliability testing. Package-on-Package (PoP) is a promising three-dimensional high-density packaging method that integrates a chip scale package (CSP) in the top package and a fine-pitch ball grid array (FBGA) in the bottom package. In this paper, in-situ scanning electron microscopy (SEM) observation is carried out to detect the deformation and damage of the PoP structure under three-point bending loading. The results indicate that the cracks occur in the die of the top package, then cause the crack deflection and bridging in the die attaching layer. Furthermore, the mechanical principles are used to analyse the cracking process of the PoP structure based on the multi-layer laminating hypothesis and the theoretical analysis results are found to be in good agreement with the experimental results. (condensed matter: structural, mechanical, and thermal properties)

WASTE PACKAGE TRANSPORTER DESIGN

International Nuclear Information System (INIS)

Weddle, D.C.; Novotny, R.; Cron, J.

1998-01-01

The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''

Context-Adaptive Learning Designs by Using Semantic Web Services

Science.gov (United States)

Dietze, Stefan; Gugliotta, Alessio; Domingue, John

2007-01-01

IMS Learning Design (IMS-LD) is a promising technology aimed at supporting learning processes. IMS-LD packages contain the learning process metadata as well as the learning resources. However, the allocation of resources--whether data or services--within the learning design is done manually at design-time on the basis of the subjective appraisals…

Components of Adenovirus Genome Packaging

Science.gov (United States)

Ahi, Yadvinder S.; Mittal, Suresh K.

2016-01-01

Adenoviruses (AdVs) are icosahedral viruses with double-stranded DNA (dsDNA) genomes. Genome packaging in AdV is thought to be similar to that seen in dsDNA containing icosahedral bacteriophages and herpesviruses. Specific recognition of the AdV genome is mediated by a packaging domain located close to the left end of the viral genome and is mediated by the viral packaging machinery. Our understanding of the role of various components of the viral packaging machinery in AdV genome packaging has greatly advanced in recent years. Characterization of empty capsids assembled in the absence of one or more components involved in packaging, identification of the unique vertex, and demonstration of the role of IVa2, the putative packaging ATPase, in genome packaging have provided compelling evidence that AdVs follow a sequential assembly pathway. This review provides a detailed discussion on the functions of the various viral and cellular factors involved in AdV genome packaging. We conclude by briefly discussing the roles of the empty capsids, assembly intermediates, scaffolding proteins, portal vertex and DNA encapsidating enzymes in AdV assembly and packaging. PMID:27721809

Genome packaging in viruses

OpenAIRE

Sun, Siyang; Rao, Venigalla B.; Rossmann, Michael G.

2010-01-01

Genome packaging is a fundamental process in a viral life cycle. Many viruses assemble preformed capsids into which the genomic material is subsequently packaged. These viruses use a packaging motor protein that is driven by the hydrolysis of ATP to condense the nucleic acids into a confined space. How these motor proteins package viral genomes had been poorly understood until recently, when a few X-ray crystal structures and cryo-electron microscopy structures became available. Here we discu...

Learn ggplot2 using Shiny App

CERN Document Server

Moon, Keon-Woong

2016-01-01

This book and app is for practitioners, professionals, researchers, and students who want to learn how to make a plot within the R environment using ggplot2, step-by-step without coding. In widespread use in the statistical communities, R is a free software language and environment for statistical programming and graphics. Many users find R to have a steep learning curve but to be extremely useful once overcome. ggplot2 is an extremely popular package tailored for producing graphics within R but which requires coding and has a steep learning curve itself, and Shiny is an open source R package that provides a web framework for building web applications using R without requiring HTML, CSS, or JavaScript. This manual—"integrating" R, ggplot2, and Shiny—introduces a new Shiny app, Learn ggplot2, that allows users to make plots easily without coding. With the Learn ggplot2 Shiny app, users can make plots using ggplot2 without having to code each step, reducing typos and error messages and allowing users to bec...

Model Development and Loads Analysis of an Offshore Wind Turbine on a Tension Leg Platform with a Comparison to Other Floating Turbine Concepts: April 2009

Energy Technology Data Exchange (ETDEWEB)

Matha, D.

2010-02-01

This report presents results of the analysis of a 5-MW wind turbine located on a floating offshore tension leg platform (TLP) that was conducted using the fully coupled time-domain aero-hydro-servo-elastic design code FAST with AeroDyn and HydroDyn. The report also provides a description of the development process of the TLP model. The model has been verified via comparisons to frequency-domain calculations. Important differences have been identified between the frequency-domain and time-domain simulations, and have generated implications for the conceptual design process. An extensive loads and stability analysis for ultimate and fatigue loads according to the procedure of the IEC 61400-3 offshore wind turbine design standard was performed with the verified TLP model. This report compares the loads for the wind turbine on the TLP to those of an equivalent land-based turbine. Major instabilities for the TLP are identified and described.

Food packaging history and innovations.

Science.gov (United States)

Risch, Sara J

2009-09-23

Food packaging has evolved from simply a container to hold food to something today that can play an active role in food quality. Many packages are still simply containers, but they have properties that have been developed to protect the food. These include barriers to oxygen, moisture, and flavors. Active packaging, or that which plays an active role in food quality, includes some microwave packaging as well as packaging that has absorbers built in to remove oxygen from the atmosphere surrounding the product or to provide antimicrobials to the surface of the food. Packaging has allowed access to many foods year-round that otherwise could not be preserved. It is interesting to note that some packages have actually allowed the creation of new categories in the supermarket. Examples include microwave popcorn and fresh-cut produce, which owe their existence to the unique packaging that has been developed.

Trends in Food Packaging.

Science.gov (United States)

Ott, Dana B.

1988-01-01

This article discusses developments in food packaging, processing, and preservation techniques in terms of packaging materials, technologies, consumer benefits, and current and potential food product applications. Covers implications due to consumer life-style changes, cost-effectiveness of packaging materials, and the ecological impact of…

WASTE PACKAGE TRANSPORTER DESIGN

Energy Technology Data Exchange (ETDEWEB)

D.C. Weddle; R. Novotny; J. Cron

1998-09-23

The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

The Innovative Approaches to Packaging – Comparison Analysis of Intelligent and Active Packaging Perceptions in Slovakia

Directory of Open Access Journals (Sweden)

Loucanova Erika

2017-06-01

Full Text Available Packaging has always served a practical function - to hold goods together and protect it when moving toward the customer through distribution channel. Today packaging is also a container for promoting the product and making it easier and safer to use. The sheer importance of packaging functions is still growing and consequently the interest of the company is to access to the packaging more innovative and creative. The paper deals with the innovative approaches to packaging resulting in the creation of packaging with interactive active features in the form of active and intelligent packaging. Using comparative analysis, we monitored the perception of the active packaging functions in comparison to intelligent packaging function among different age categories. We identified the age categories which are most interested in these functions.

Applications of Active Packaging in Breads

Directory of Open Access Journals (Sweden)

Ali Göncü

2017-10-01

Full Text Available Changes on consumer preferences lead to innovations and improvements in new packaging technologies. With these new developments passive packaging technologies aiming to protect food nowadays have left their place to active and intelligent packaging technologies that have other various functions beside protection of food. Active packaging is defined as an innovative packaging type and its usage increases the shelf life of food significantly. Applications of active packaging have begun to be used for packaging of breads. In this study active packaging applications in breads have been reviewed.

Food Packaging Materials

Science.gov (United States)

1978-01-01

The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

Plasma physics plotting package

International Nuclear Information System (INIS)

Hyman, D.H.

1981-02-01

We describe a package of plotting routines that do up to six two- or three-dimensional plots on a frame with minimal loss of resolution. The package now runs on a PDP-10 with PLOT-10 TCS primitives and on a Control Data Corporation-7600 and a Cray-1 with TV80LIB primitives on the National Magnetic Fusion Energy Computer Center network. The package is portable to other graphics systems because only the primitive plot calls are used from the underlying system's graphics package

Active food packaging technologies.

Science.gov (United States)

Ozdemir, Murat; Floros, John D

2004-01-01

Active packaging technologies offer new opportunities for the food industry, in the preservation of foods. Important active packaging systems currently known to date, including oxygen scavengers, carbon dioxide emitters/absorbers, moisture absorbers, ethylene absorbers, ethanol emitters, flavor releasing/absorbing systems, time-temperature indicators, and antimicrobial containing films, are reviewed. The principle of operation of each active system is briefly explained. Recent technological advances in active packaging are discussed, and food related applications are presented. The effects of active packaging systems on food quality and safety are cited.

Software Packages to Support Electrical Engineering Virtual Lab

Directory of Open Access Journals (Sweden)

Manuel Travassos Valdez

2012-03-01

Full Text Available The use of Virtual Reality Systems (VRS, as a learning aid, encourages the creation of tools that allow users/students to simulate educational environments on a computer. This article presents a way of building a VRS system with Software Packages to support Electrical Engineering Virtual Laboratories to be used in a near future in the teaching of the curriculum unit of Circuit Theory. The steps required for the construction of a project are presented in this paper. The simulation is still under construction and intends to use a three-dimensional virtual environment laboratory electric measurement, which will allow users/students to experiment and test the modeled equipment. Therefore, there are still no links available for further examination. The result may demonstrate the future potential of applications of Virtual Reality Systems as an efficient and cost-effective learning system.

Naval Waste Package Design Report

International Nuclear Information System (INIS)

M.M. Lewis

2004-01-01

A design methodology for the waste packages and ancillary components, viz., the emplacement pallets and drip shields, has been developed to provide designs that satisfy the safety and operational requirements of the Yucca Mountain Project. This methodology is described in the ''Waste Package Design Methodology Report'' Mecham 2004 [DIRS 166168]. To demonstrate the practicability of this design methodology, four waste package design configurations have been selected to illustrate the application of the methodology. These four design configurations are the 21-pressurized water reactor (PWR) Absorber Plate waste package, the 44-boiling water reactor (BWR) waste package, the 5-defense high-level waste (DHLW)/United States (U.S.) Department of Energy (DOE) spent nuclear fuel (SNF) Co-disposal Short waste package, and the Naval Canistered SNF Long waste package. Also included in this demonstration is the emplacement pallet and continuous drip shield. The purpose of this report is to document how that design methodology has been applied to the waste package design configurations intended to accommodate naval canistered SNF. This demonstrates that the design methodology can be applied successfully to this waste package design configuration and support the License Application for construction of the repository

Melanie II--a third-generation software package for analysis of two-dimensional electrophoresis images: II. Algorithms.

Science.gov (United States)

Appel, R D; Vargas, J R; Palagi, P M; Walther, D; Hochstrasser, D F

1997-12-01

After two generations of software systems for the analysis of two-dimensional electrophoresis (2-DE) images, a third generation of such software packages has recently emerged that combines state-of-the-art graphical user interfaces with comprehensive spot data analysis capabilities. A key characteristic common to most of these software packages is that many of their tools are implementations of algorithms that resulted from research areas such as image processing, vision, artificial intelligence or machine learning. This article presents the main algorithms implemented in the Melanie II 2-D PAGE software package. The applications of these algorithms, embodied as the feature of the program, are explained in an accompanying article (R. D. Appel et al.; Electrophoresis 1997, 18, 2724-2734).

49 CFR 173.24 - General requirements for packagings and packages.

Science.gov (United States)

2010-10-01

... identifiable (without the use of instruments) release of hazardous materials to the environment; (2) The effectiveness of the package will not be substantially reduced; for example, impact resistance, strength... significant chemical or galvanic reaction between the materials and contents of the package. (3) Plastic...

Packaging systems for animal origin food

Directory of Open Access Journals (Sweden)

2011-03-01

Full Text Available The main task of food packaging is to protect the product during storage and transport against the action of biological, chemical and mechanical factors. The paper presents packaging systems for food of animal origin. Vacuum and modified atmosphere packagings were characterised together with novel types of packagings, referred to as intelligent packaging and active packaging. The aim of this paper was to present all advantages and disadvantages of packaging used for meat products. Such list enables to choose the optimal type of packaging for given assortment of food and specific conditions of the transport and storing.

Merganser Download Package

Data.gov (United States)

U.S. Environmental Protection Agency — This data download package contains an Esri 10.0 MXD, file geodatabase and copy of this FGDC metadata record. The data in this package are used in support of the...

Modular assembly of chimeric phi29 packaging RNAs that support DNA packaging.

Science.gov (United States)

Fang, Yun; Shu, Dan; Xiao, Feng; Guo, Peixuan; Qin, Peter Z

2008-08-08

The bacteriophage phi29 DNA packaging motor is a protein/RNA complex that can produce strong force to condense the linear-double-stranded DNA genome into a pre-formed protein capsid. The RNA component, called the packaging RNA (pRNA), utilizes magnesium-dependent inter-molecular base-pairing interactions to form ring-shaped complexes. The pRNA is a class of non-coding RNA, interacting with phi29 motor proteins to enable DNA packaging. Here, we report a two-piece chimeric pRNA construct that is fully competent in interacting with partner pRNA to form ring-shaped complexes, in packaging DNA via the motor, and in assembling infectious phi29 virions in vitro. This is the first example of a fully functional pRNA assembled using two non-covalently interacting fragments. The results support the notion of modular pRNA architecture in the phi29 packaging motor.

The art of packaging: An investigation into the role of color in packaging, marketing, and branding

Directory of Open Access Journals (Sweden)

Behzad Mohebbi

2014-12-01

Full Text Available The purpose of this study is to contribute to the existing research in the field of packaging and marketing and shed more light on the psychology of colors and their effect on packaging and marketing. Nowadays, packaging is proved to be one of the significant factors in the success of promoting product sale. However, there is a perceived gap with respect to the different aspects of packaging, in particular the graphics, design, and color of packaging. The current study provides a comprehensive overview of packaging. It elaborates on different aspects of packaging and summarizes the findings of the most recent research conducted to date probing into packaging from different perspectives. It also discusses the role of color, i.e., the psychology of colors, and graphics in packaging and product sale. It is argued that graphics and color play key roles in promoting product sale and designers and marketers should attach a great deal of importance to color in packaging. The implications for producers, marketers, practitioners, and researchers are discussed in detail and suggestions for future research are provided.

MINUIT package parallelization and applications using the RooFit package

International Nuclear Information System (INIS)

Lazzaro, Alfio; Moneta, Lorenzo

2010-01-01

The fitting procedures are based on numerical minimization of functions. The MINUIT package is the most common package used for such procedures in High Energy Physics community. The main algorithm in this package, MIGRAD, searches the minimum of a function using the gradient information. For each minimization iteration, MIGRAD requires the calculation of the derivative for each free parameter of the function to be minimized. Minimization is required for data analysis problems based on the maximum likelihood technique. The calculation of complex likelihood functions, with several free parameters, many independent variables and large data samples, can be very CPU-time consuming. Then, the minimization process requires the calculation of the likelihood functions several times for each minimization iteration. In this paper we will show how MIGRAD algorithm and the likelihood function calculation can be easily parallelized using Message Passing Interface techniques. We will present the speed-up improvements obtained in typical physics applications such as complex maximum likelihood fits using the RooFit package.

Waste package performance analysis

International Nuclear Information System (INIS)

Lester, D.H.; Stula, R.T.; Kirstein, B.E.

1982-01-01

A performance assessment model for multiple barrier packages containing unreprocessed spent fuel has been applied to several package designs. The resulting preliminary assessments were intended for use in making decisions about package development programs. A computer model called BARIER estimates the package life and subsequent rate of release of selected nuclides. The model accounts for temperature, pressure (and resulting stresses), bulk and localized corrosion, and nuclide retardation by the backfill after water intrusion into the waste form. The assessment model assumes a post-closure, flooded, geologic repository. Calculations indicated that, within the bounds of model assumptions, packages could last for several hundred years. Intact backfills of appropriate design may be capable of nuclide release delay times on the order of 10 7 yr for uranium, plutonium, and americium. 8 references, 6 figures, 9 tables

Comparative Packaging Study

Science.gov (United States)

Perchonok, Michele H.; Oziomek, Thomas V.

2009-01-01

Future long duration manned space flights beyond low earth orbit will require the food system to remain safe, acceptable and nutritious. Development of high barrier food packaging will enable this requirement by preventing the ingress and egress of gases and moisture. New high barrier food packaging materials have been identified through a trade study. Practical application of this packaging material within a shelf life test will allow for better determination of whether this material will allow the food system to meet given requirements after the package has undergone processing. The reason to conduct shelf life testing, using a variety of packaging materials, stems from the need to preserve food used for mission durations of several years. Chemical reactions that take place during longer durations may decrease food quality to a point where crew physical or psychological well-being is compromised. This can result in a reduction or loss of mission success. The rate of chemical reactions, including oxidative rancidity and staling, can be controlled by limiting the reactants, reducing the amount of energy available to drive the reaction, and minimizing the amount of water available. Water not only acts as a media for microbial growth, but also as a reactant and means by which two reactants may come into contact with each other. The objective of this study is to evaluate three packaging materials for potential use in long duration space exploration missions.

A Methodological Approach to Encourage the Service-Oriented Learning Systems Development

Science.gov (United States)

Diez, David; Malizia, Alessio; Aedo, Ignacio; Diaz, Paloma; Fernandez, Camino; Dodero, Juan-Manuel

2009-01-01

The basic idea of service-oriented learning is that a learning environment should be conceived as a set of independent units of learning packaged as learning services. The design, development and deployment of a learning system based on integrating different learning services needs both a technological platform to support the system as well as a…

Intelligent food packaging - research and development

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2015-03-01

Full Text Available Packaging also fosters effective marketing of the food through distribution and sale channels. It is of the utmost importance to optimize the protection of the food, a great quality and appearance - better than typical packaged foods. In recent years, intelligent packaging became very popular. Intelligent packaging is becoming more and more widely used for food products. Application of this type of solution contributes to improvement of the quality consumer life undoubtedly. Intelligent packaging refers to a package that can sense environmental changes, and in turn, informs the users about the changes. These packaging systems contain devices that are capable of sensing and providing information about the functions and properties of the packaged foods. Also, this paper will review intelligent packaging technologies and describe different types of indicators (time-temperature indicators, freshness indicators.

Creative Thinking Package

Science.gov (United States)

Jones, Clive

1972-01-01

A look at the latest package from a British managment training organization, which explains and demonstrates creative thinking techniques, including brainstorming. The package, designed for groups of twelve or more, consists of tapes, visuals, and associated exercises. (Editor/JB)

Perspectives on the Elements of Packaging Design : A Qualitative Study on the Communication of Packaging

OpenAIRE

Alervall, Viktoria; Saied, Juan Sdiq

2013-01-01

Background: In today’s markets almost all products we buy come packaged. We use packaging to protect, contain and identify products. Furthermore if this is executed in a skillful way consumers often choose products based on packaging. The work of a designer and marketer is therefore extremely valuable when it comes to the design of a package. Problem: How are packages used to communicate marketing information? Purpose: The focus of this thesis is to identify differences and similarities of a ...

21 CFR 355.20 - Packaging conditions.

Science.gov (United States)

2010-04-01

... conditions. (a) Package size limitation. Due to the toxicity associated with fluoride active ingredients, the... (toothpastes and tooth powders) packages shall not contain more than 276 milligrams (mg) total fluorine per... packages shall not contain more than 120 mg total fluorine per package. (3) Exception. Package size...

19 CFR 191.13 - Packaging materials.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Packaging materials. 191.13 Section 191.13 Customs... (CONTINUED) DRAWBACK General Provisions § 191.13 Packaging materials. (a) Imported packaging material... packaging material when used to package or repackage merchandise or articles exported or destroyed pursuant...

Warpage of QFN Package in Post Mold Cure Process of integrated circuit packaging

Science.gov (United States)

Sriwithoon, Nattha; Ugsornrat, Kessararat; Srisuwitthanon, Warayoot; Thonglor, Panakamon

2017-09-01

This research studied about warpage of QFN package in post mold cure process of integrated circuit (IC) packages using pre-plated (PPF) leadframe. For IC package, epoxy molding compound (EMC) are molded by cross linking of compound stiffness but incomplete crosslinked network and leading the fully cured thermoset by post mold cure (PMC) process. The cure temperature of PMC can change microstructure of EMC in term of stress inside the package and effect to warpage of the package due to coefficient of thermal expansion (CTE) between EMC and leadframe. In experiment, cure temperatures were varied to check the effect of internal stress due to different cure temperature after completed post mold cure for TDFN 2×3 8L. The cure temperature were varied with 180 °C, 170 °C, 160 °C, and 150°C with cure time 4 and 6 hours, respectively. For analysis, the TDFN 2×3 8L packages were analyzed the warpage by thickness gauge and scanning acoustic microscope (SAM) after take the test samples out from the oven cure. The results confirmed that effect of different CTE between EMC and leadframe due to different cure temperature resulting to warpage of the TDFN 2×3 8L packages.

CYPROS - Cybernetic Program Packages

Directory of Open Access Journals (Sweden)

Arne Tyssø

1980-10-01

Full Text Available CYPROS is an interactive program system consisting of a number of special purpose packages for simulation, identification, parameter estimation and control system design. The programming language is standard FORTRAN IV and the system is implemented on a medium size computer system (Nord-10. The system is interactive and program control is obtained by the use of numeric terminals. Output is rapidly examined by extensive use of video colour graphics. The subroutines included in the packages are designed and documented according to standardization rules given by the SCL (Scandinavian Control Library organization. This simplifies the exchange of subroutines throughout the SCL system. Also, this makes the packages attractive for implementation by industrial users. In the simulation package, different integration methods are available and it can be easily used for off-line, as well as real time, simulation problems. The identification package consists of programs for single-input/single-output and multivariablc problems. Both transfer function models and state space models can be handled. Optimal test signals can be designed. The control package consists of programs based on multivariable time domain and frequency domain methods for analysis and design. In addition, there is a package for matrix and time series manipulation. CYPROS has been applied successfully to industrial problems of various kinds, and parts of the system have already been implemented on different computers in industry. This paper will, in some detail, describe the use and the contents of the packages and some examples of application will be discussed.

Characterization of integrated circuit packaging materials

CERN Document Server

Moore, Thomas

1993-01-01

Chapters in this volume address important characteristics of IC packages. Analytical techniques appropriate for IC package characterization are demonstrated through examples of the measurement of critical performance parameters and the analysis of key technological problems of IC packages. Issues are discussed which affect a variety of package types, including plastic surface-mount packages, hermetic packages, and advanced designs such as flip-chip, chip-on-board and multi-chip models.

The ZOOM minimization package

International Nuclear Information System (INIS)

Fischler, Mark S.; Sachs, D.

2004-01-01

A new object-oriented Minimization package is available for distribution in the same manner as CLHEP. This package, designed for use in HEP applications, has all the capabilities of Minuit, but is a re-write from scratch, adhering to modern C++ design principles. A primary goal of this package is extensibility in several directions, so that its capabilities can be kept fresh with as little maintenance effort as possible. This package is distinguished by the priority that was assigned to C++ design issues, and the focus on producing an extensible system that will resist becoming obsolete

Packaging Concerns/Techniques for Large Devices

Science.gov (United States)

Sampson, Michael J.

2009-01-01

This slide presentation reviews packaging challenges and options for electronic parts. The presentation includes information about non-hermetic packages, space challenges for packaging and complex package variations.

Lerot: An Online Learning to Rank Framework

NARCIS (Netherlands)

Schuth, A.; Hofmann, K.; Whiteson, S.; de Rijke, M.

2013-01-01

Online learning to rank methods for IR allow retrieval systems to optimize their own performance directly from interactions with users via click feedback. In the software package Lerot, presented in this paper, we have bundled all ingredients needed for experimenting with online learning to rank for

Packaging and transport of radioisotopes

International Nuclear Information System (INIS)

Taylor, C.B.G.

1976-01-01

The importance of radioisotope traffic is emphasized. More than a million packages are being transported each year, mostly for medical uses. The involvement of public transport services and the incidental dose to the public (which is very small) are appreciably greater than for movements connected with the nuclear fuel cycle. Modern isotope packages are described, and an outline given of the problems of a large radioisotope manufacturer who has to package many different types of product. Difficulties caused by recent uncoordinated restrictions on the use of passenger aircraft are mentioned. Some specific problems relating to radioisotope packaging are discussed. These include the crush resistance of Type A packages, the closure of steel drums, the design of secure closures for large containers, the Type A packaging of liquids, leak tightness criteria of Type B packages, and the use of 'unit load' overpacks to consign a group of individually approved packages together as a single shipment. Reference is made to recent studies of the impact of radioisotope shipments on the environment. Cost/benefit analysis is important in this field - an important public debate is only just beginning. (author)

Safety Analysis Report - Packages, 9965, 9968, 9972-9975 Packages

International Nuclear Information System (INIS)

Van Alstine, M.N.

1999-01-01

This Safety Analysis Report for Packaging (SARP) documents the performance of the 9965 B, 9968 B, 9972 B(U), 9973 B(U), 9974 B(U), and 9975 B(U) packages in satisfying the regulatory safety requirements of the Code of Federal Regulations (CFR) 711 and the International Atomic Energy Agency (IAEA) Safety Series No. 6, Regulations for the Safe Transport of Radioactive Material, 1985 edition2. Results of the analysis and testing performed on the 9965 B, 9968 B, 9972 B(U), 9973 B(U), 9974 B(U), and 9975 B(U) packages are presented in this SARP, which was prepared in accordance with U.S. Department of energy (DOE) Order 5480.33 and in the format specified in the Nuclear Regulatory Commission (NRC) Regulatory Guides 7.94 and 7.10.5

Safety analysis report - packages 9965, 9968, 9972-9975 packages

International Nuclear Information System (INIS)

Van Alstine, M.N.

1997-10-01

This Safety Analysis Report for Packaging (SARP) documents the performance of the 9965 B( ), 9968 B( ), 9972 B(U), 9973 B(U), 9974 B(U), and 9975 B(U) packages in satisfying the regulatory safety requirements of the Code of Federal Regulations (CFR) 10 CFR 71 and the International Atomic Energy Agency (IAEA) Safety Series No. 6, Regulations for the Safe Transport of Radioactive Material, 1985 edition. Results of the analysis and testing performed on the 9965 B(), 9968 B(), 9972 B(U), 9973 B(U), and 9975 B(U) packages are presented in this SARP, which was prepared in accordance with U.S. Department of Energy (DOE) Order 5480.3 and in the format specified in the Nuclear Regulatory Commission (NRC) Regulatory Guides 7.9 and 7.10

Healthy package, healthy product? Effects of packaging design as a function of purchase setting

NARCIS (Netherlands)

van Rompay, Thomas Johannes Lucas; Deterink, Florien; Fenko, Anna

2016-01-01

Inspired by research testifying to the influence of visual packaging appearance and meaning portrayal on food evaluation, here it is argued that effects of packaging design vary depending on purchase context. Realistic packaging variants for a fictitious yoghurt brand varying in health connotation

Integrated Approach to Industrial Packaging Design

Science.gov (United States)

Vorobeva, O.

2017-11-01

The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

Directory of certificates of compliance for radioactive materials packages. Summary report of NRC approved packages

International Nuclear Information System (INIS)

1979-10-01

This directory contains a Summary Report of NRC Approved Packages for radioactive material packages effective September 14, 1979. Purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory

Directory of certificates of compliance for radioactive materials packages. Summary report of NRC approved packages

Energy Technology Data Exchange (ETDEWEB)

None

1979-10-01

This directory contains a Summary Report of NRC Approved Packages for radioactive material packages effective September 14, 1979. Purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory.

Directory of Certificates of Compliance for Radioactive Materials Packages: Report of NRC approved packages

International Nuclear Information System (INIS)

1988-12-01

This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), all Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective October 1, 1988. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

Directory of certificates of compliance for radioactive materials packages, Report of NRC approved packages

International Nuclear Information System (INIS)

1990-10-01

This directory contains a Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Materials Packages effective October 1, 1990. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by Company name is included in the back of Volume 3 for approved QA programs. The Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

The Lawrence Livermore National Laboratory DOE-STD-3013 Surveillance Program for the Storage of Plutonium Packages

International Nuclear Information System (INIS)

Riley, D

2005-01-01

This document presents a site-specific DOE-STD-3013 (3013) surveillance program for 3013 material stored at Lawrence Livermore National Laboratory (LLNL) in the B332 Plutonium Facility. The 3013 standard requires the development of a surveillance program to assure the long-term safety of plutonium storage in 3013 compliant containers. A complex-wide Integrated Surveillance Program in Support of Long-Term Storage of Plutonium-Bearing Materials (ISP)(LA-UR-00-3246, Revision 1, March 2001) has been developed to give guidance on an acceptable surveillance approach and to set up a mechanism to integrate surveillance activities and facilitate the sharing of lessons learned. This LLNL 3013 surveillance program has been developed following guidelines established for Storage Sites in the ISP and is sufficient for the storage in the LLNL Plutonium Facility. The LLNL 3013 surveillance program must be coupled with the DOE complex wide Materials Identification and Surveillance (MIS) program and the ISP led by Savannah River Site (SRS). These programs support the technical basis for continuing safe storage of plutonium packages and provide the technical basis for the limited scope of the site-specific LLNL 3013 surveillance program. The LLNL 3013 surveillance program calls for surveillance of 3013 packages to begin approximately three years after packaging of the first oxide. One percent of the stored packages per year will be randomly selected and nondestructively examined (NDE) by LLNL per the guidelines of the ISP. Additional packages may be selected for NDE if recommended by the ISP Steering Committee and agreed upon by the MIS Working Group. One selected package will be shipped to SRS for destructive analysis each year starting when SRS can receive them. This is expected to be in FY2007. We expect to store a maximum of 400 3013 packages. This would result in an expected maximum of 4 surveillances per year. The activities outlined in the program evolved from the current

Safety analysis report for packages: packaging of fissile and other radioactive materials. Final report

International Nuclear Information System (INIS)

Chalfant, G.G.

1984-01-01

The 9965, 9966, 9967, and 9968 packages are designed for surface shipment of fissile and other radioactive materials where a high degree of containment (either single or double) is required. Provisions are made to add shielding material to the packaging as required. The package was physically tested to demonstrate that it meets the criteria specified in USDOE Order No. 5480.1, chapter III, dated 5/1/81, which invokes Title 10, Code of Federal Regulations, Part 71 (10 CFR 71), Packing and Transportation of Radioactive Material, and Title 49, Code of Federal Regulations, Part 100-179, Transportation. By restricting the maximum normal operating pressure of the packages to less than 7 kg/cm 2 (gauge) (99 to 54 psig), the packages will comply with Type B(U) regulations of the International Atomic Energy Agency (IAEA) in its Regulations for the Safe Transport of Radioactive Materials, Safety Series No. 6, 1973 Revised Edition, and may be used for export and import shipments. These packages have been assessed for transport of up to 14.5 kilograms of uranium, excluding uranium-233, or 4.4 kilograms of plutonium metal, oxides, or scrap having a maximum radioactive decay energy of 30 watts. Specific maximum package contents are given. This quantity and the configuration of uranium or plutonium metal cannot be made critical by any combination of hydrogeneous reflection and moderation regardless of the condition of the package. For a uranium-233 shipment, a separate criticality evaluation for the specific package is required

Ensuring socially responsible packaging design

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...... "User‐friendly Packaging" aims to create a platform for developing more user‐friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?...

Packaging based on polymeric materials

Directory of Open Access Journals (Sweden)

Jovanović Slobodan M.

2005-01-01

Full Text Available In the past two years the consumption of common in the developed countries world wide (high tonnage polymers for packaging has approached a value of 50 wt.%. In the same period more than 50% of the packaging units on the world market were made of polymeric materials despite the fact that polymeric materials present 17 wt.% of all packaging materials. The basic properties of polymeric materials and their environmental and economical advantages, providing them such a position among packaging materials, are presented in this article. Recycling methods, as well as the development trends of polymeric packaging materials are also presented.

Advanced flip chip packaging

CERN Document Server

Lai, Yi-Shao; Wong, CP

2013-01-01

Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable. This book also: Offers broad-ranging chapters with a focus on IC-package-system integration Provides viewpoints from leading industry executives and experts Details state-of-the-art achievements in process technologies and scientific research Presents a clear development history and touches on trends in the industry while also discussing up-to-date technology information Advanced Flip Chip Packaging is an ideal book for engineers, researchers, and graduate students interested in the field of flip chip packaging.

Challenges in the Packaging of MEMS

Energy Technology Data Exchange (ETDEWEB)

Malshe, A.P.; Singh, S.B.; Eaton, W.P.; O' Neal, C.; Brown, W.D.; Miller, W.M.

1999-03-26

The packaging of Micro-Electro-Mechanical Systems (MEMS) is a field of great importance to anyone using or manufacturing sensors, consumer products, or military applications. Currently much work has been done in the design and fabrication of MEMS devices but insufficient research and few publications have been completed on the packaging of these devices. This is despite the fact that packaging is a very large percentage of the total cost of MEMS devices. The main difference between IC packaging and MEMS packaging is that MEMS packaging is almost always application specific and greatly affected by its environment and packaging techniques such as die handling, die attach processes, and lid sealing. Many of these aspects are directly related to the materials used in the packaging processes. MEMS devices that are functional in wafer form can be rendered inoperable after packaging. MEMS dies must be handled only from the chip sides so features on the top surface are not damaged. This eliminates most current die pick-and-place fixtures. Die attach materials are key to MEMS packaging. Using hard die attach solders can create high stresses in the MEMS devices, which can affect their operation greatly. Low-stress epoxies can be high-outgassing, which can also affect device performance. Also, a low modulus die attach can allow the die to move during ultrasonic wirebonding resulting to low wirebond strength. Another source of residual stress is the lid sealing process. Most MEMS based sensors and devices require a hermetically sealed package. This can be done by parallel seam welding the package lid, but at the cost of further induced stress on the die. Another issue of MEMS packaging is the media compatibility of the packaged device. MEMS unlike ICS often interface with their environment, which could be high pressure or corrosive. The main conclusion we can draw about MEMS packaging is that the package affects the performance and reliability of the MEMS devices. There is a

CH Packaging Program Guidance

International Nuclear Information System (INIS)

2006-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.' They further state: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant| (WIPP) management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations(CFR) 71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations

CH Packaging Program Guidance

International Nuclear Information System (INIS)

2007-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.' They further state: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) 71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations

User friendly packaging

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

2010-01-01

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...

The R Package bgmm : Mixture Modeling with Uncertain Knowledge

Directory of Open Access Journals (Sweden)

Przemys law Biecek

2012-04-01

Full Text Available Classical supervised learning enjoys the luxury of accessing the true known labels for the observations in a modeled dataset. Real life, however, poses an abundance of problems, where the labels are only partially defined, i.e., are uncertain and given only for a subsetof observations. Such partial labels can occur regardless of the knowledge source. For example, an experimental assessment of labels may have limited capacity and is prone to measurement errors. Also expert knowledge is often restricted to a specialized area and is thus unlikely to provide trustworthy labels for all observations in the dataset. Partially supervised mixture modeling is able to process such sparse and imprecise input. Here, we present an R package calledbgmm, which implements two partially supervised mixture modeling methods: soft-label and belief-based modeling. For completeness, we equipped the package also with the functionality of unsupervised, semi- and fully supervised mixture modeling. On real data we present the usage of bgmm for basic model-fitting in all modeling variants. The package can be applied also to selection of the best-fitting from a set of models with different component numbers or constraints on their structures. This functionality is presented on an artificial dataset, which can be simulated in bgmm from a distribution defined by a given model.

Packaging of control system software

International Nuclear Information System (INIS)

Zagar, K.; Kobal, M.; Saje, N.; Zagar, A.; Sabjan, R.; Di Maio, F.; Stepanov, D.

2012-01-01

Control system software consists of several parts - the core of the control system, drivers for integration of devices, configuration for user interfaces, alarm system, etc. Once the software is developed and configured, it must be installed to computers where it runs. Usually, it is installed on an operating system whose services it needs, and also in some cases dynamically links with the libraries it provides. Operating system can be quite complex itself - for example, a typical Linux distribution consists of several thousand packages. To manage this complexity, we have decided to rely on Red Hat Package Management system (RPM) to package control system software, and also ensure it is properly installed (i.e., that dependencies are also installed, and that scripts are run after installation if any additional actions need to be performed). As dozens of RPM packages need to be prepared, we are reducing the amount of effort and improving consistency between packages through a Maven-based infrastructure that assists in packaging (e.g., automated generation of RPM SPEC files, including automated identification of dependencies). So far, we have used it to package EPICS, Control System Studio (CSS) and several device drivers. We perform extensive testing on Red Hat Enterprise Linux 5.5, but we have also verified that packaging works on CentOS and Scientific Linux. In this article, we describe in greater detail the systematic system of packaging we are using, and its particular application for the ITER CODAC Core System. (authors)

Emotional responses to a negative emotion induction procedure in Borderline Personality Disorder

Directory of Open Access Journals (Sweden)

Albert Feliu-Soler

2013-01-01

Full Text Available El presente estudio pretende determinar si existe o no una mayor reactividad emocional en el Trastorno Límite de la Personalidad (TLP en un contexto de laboratorio. Se realizó una inducción emocional negativa (presentación de imágenes estandarizadas con contenido negativo a cincuenta participantes (35 pacientes con TLP y 15 controles sanos. Para evaluar la respuesta emocional subjetiva se utilizaron cuestionarios auto-informados; los niveles de cortisol (sCORT y alfa-amilasa (sAA salivares se utilizaron para medir la reactividad biológica al procedimiento. En el grupo de TLP, se observaron niveles de sCORT más bajos y niveles de sAA más elevados en comparación al grupo control. No se observaron diferencias significativas en relación a la reactividad emocional auto-informada, pero los pacientes con TLP reportaron mayor intensidad de emociones negativas a nivel basal así como también durante todo el procedimiento. Los resultados no apoyan la hipótesis de hiperreactividad emocional en el TLP. Sin embargo, los pacientes con TLP presentaron mayor intensidad de emociones negativas a nivel basal, característica que debería ser considerada como esencial en el trastorno. Futuros estudios deberán incorporar otros paradigmas de inducción emocional más específicos para TLP con el fin de confirmar las tendencias observadas en el presente estudio. © 2012 Asociación Española de Psicología Conductual. Publicado por Elsevier España, S.L. Todos los derechos reservados.

Technical Evaluation Report 29: Integrated Learning Management Systems

Directory of Open Access Journals (Sweden)

Linda Schwartz

2004-04-01

Full Text Available Four integrated learning management packages were reviewed: CentraOne, IntraLearn, Lyceum, and Silicon Chalk. These products provide different combinations of synchronous and asynchronous tools. The current report examines the products in relation to their specific value for distance educators and students.

Sensory impacts of food-packaging interactions.

Science.gov (United States)

Duncan, Susan E; Webster, Janet B

2009-01-01

Sensory changes in food products result from intentional or unintentional interactions with packaging materials and from failure of materials to protect product integrity or quality. Resolving sensory issues related to plastic food packaging involves knowledge provided by sensory scientists, materials scientists, packaging manufacturers, food processors, and consumers. Effective communication among scientists and engineers from different disciplines and industries can help scientists understand package-product interactions. Very limited published literature describes sensory perceptions associated with food-package interactions. This article discusses sensory impacts, with emphasis on oxidation reactions, associated with the interaction of food and materials, including taints, scalping, changes in food quality as a function of packaging, and examples of material innovations for smart packaging that can improve sensory quality of foods and beverages. Sensory evaluation is an important tool for improved package selection and development of new materials.

Plutonium stabilization and packaging system

International Nuclear Information System (INIS)

1996-01-01

This document describes the functional design of the Plutonium Stabilization and Packaging System (Pu SPS). The objective of this system is to stabilize and package plutonium metals and oxides of greater than 50% wt, as well as other selected isotopes, in accordance with the requirements of the DOE standard for safe storage of these materials for 50 years. This system will support completion of stabilization and packaging campaigns of the inventory at a number of affected sites before the year 2002. The package will be standard for all sites and will provide a minimum of two uncontaminated, organics free confinement barriers for the packaged material

RH Packaging Operations Manual

International Nuclear Information System (INIS)

Washington TRU Solutions LLC

2003-01-01

This procedure provides operating instructions for the RH-TRU 72-B Road Cask, Waste Shipping Package. In this document, ''Packaging'' refers to the assembly of components necessary to ensure compliance with the packaging requirements (not loaded with a payload). ''Package'' refers to a Type B packaging that, with its radioactive contents, is designed to retain the integrity of its containment and shielding when subject to the normal conditions of transport and hypothetical accident test conditions set forth in 10 CFR Part 71. Loading of the RH 72-B cask can be done two ways, on the RH cask trailer in the vertical position or by removing the cask from the trailer and loading it in a facility designed for remote-handling (RH). Before loading the 72-B cask, loading procedures and changes to the loading procedures for the 72-B cask must be sent to CBFO at sitedocuments at wipp.ws for approval

Large packages for reactor decommissioning waste

International Nuclear Information System (INIS)

Price, M.S.T.

1991-01-01

This study was carried out jointly by the Atomic Energy Establishment at Winfrith (now called the Winfrith Technology Centre), Windscale Laboratory and Ove Arup and Partners. The work involved the investigation of the design of large transport containers for intermediate level reactor decommissioning waste, ie waste which requires shielding, and is aimed at European requirements (ie for both LWR and gas cooled reactors). It proposes a design methodology for such containers covering the whole lifetime of a waste disposal package. The design methodology presented takes account of various relevant constraints. Both large self shielded and returnable shielded concepts were developed. The work was generic, rather than specific; the results obtained, and the lessons learned, remain to be applied in practice

MARS software package status

International Nuclear Information System (INIS)

Azhgirej, I.L.; Talanov, V.V.

2000-01-01

The MARS software package is intended for simulating the nuclear-electromagnetic cascades and the secondary neutrons and muons transport in the heterogeneous medium of arbitrary complexity in the magnetic fields presence. The inclusive approach to describing the particle production in the nuclear and electromagnetic interactions and by the unstable particles decay is realized in the package. The MARS software package was actively applied for solving various radiation physical problems [ru

CH Packaging Program Guidance

International Nuclear Information System (INIS)

Washington TRU Solutions LLC

2003-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP charges the WIPP management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document provides the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs

CH Packaging Program Guidance

International Nuclear Information System (INIS)

Washington TRU Solutions LLC

2002-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT Shipping Package, and directly related components. This document complies with the minimum requirements as specified in TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event there is a conflict between this document and the SARP or C of C, the SARP and/or C of C shall govern. C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SAR P charges the WIPP Management and Operation (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 CFR 71.11. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document details the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize these operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs

Consumer response to packaging design

NARCIS (Netherlands)

Steenis, Nigel D.; Herpen, van Erica; Lans, van der Ivo A.; Ligthart, Tom N.; Trijp, van Hans C.M.

2017-01-01

Building on theories of cue utilization, this paper investigates whether and how packaging sustainability influences consumer perceptions, inferences and attitudes towards packaged products. A framework is tested in an empirical study among 249 students using soup products varying in packaging

Natural biopolimers in organic food packaging

Science.gov (United States)

Wieczynska, Justyna; Cavoski, Ivana; Chami, Ziad Al; Mondelli, Donato; Di Donato, Paola; Di Terlizzi, Biagio

2014-05-01

Concerns on environmental and waste problems caused by use of non-biodegradable and non-renewable based plastic packaging have caused an increase interest in developing biodegradable packaging using renewable natural biopolymers. Recently, different types of biopolymers like starch, cellulose, chitosan, casein, whey protein, collagen, egg white, soybean protein, corn zein, gelatin and wheat gluten have attracted considerable attention as potential food packaging materials. Recyclable or biodegradable packaging material in organic processing standards is preferable where possible but specific principles of packaging are not precisely defined and standards have to be assessed. There is evidence that consumers of organic products have specific expectations not only with respect to quality characteristics of processed food but also in social and environmental aspects of food production. Growing consumer sophistication is leading to a proliferation in food eco-label like carbon footprint. Biopolymers based packaging for organic products can help to create a green industry. Moreover, biopolymers can be appropriate materials for the development of an active surfaces designed to deliver incorporated natural antimicrobials into environment surrounding packaged food. Active packaging is an innovative mode of packaging in which the product and the environment interact to prolong shelf life or enhance safety or sensory properties, while maintaining the quality of the product. The work will discuss the various techniques that have been used for development of an active antimicrobial biodegradable packaging materials focusing on a recent findings in research studies. With the current focus on exploring a new generation of biopolymer-based food packaging materials with possible applications in organic food packaging. Keywords: organic food, active packaging, biopolymers , green technology

Physical and chemical characteristics of cashew nut flour stored and packaged with different packages

Directory of Open Access Journals (Sweden)

Bruna Carolina GADANI

Full Text Available Abstract The aim of this study was to evaluate the physical and chemical changes in cashew nut flour under different packaging and storage conditions. The flour samples were characterized according to their chemical composition, packaged in polystyrene trays associated with covering chloride polyvinyl (PVC, plastic pot of polyethylene terephthalate (PET, plastic packaging polyethylene (POL and without coating polystyrene trays (CON. All packages were stored for 225 days, evaluating every 45 days the moisture content of the flour as well as extracting their oil by the cold method for characterization on the following indexes: acidity, saponification, iodine, peroxide and refraction. There was slight and gradual increase in the moisture content from the 45th to the 225th day, especially for products packaged in PVC and without coating polystyrene trays (CON. The oil saponification indexes showed gradual decrease during storage, especially in flour without packaging (CON. There was a gradual increase in the iodine index until the 135th day, followed by decay. The acidity and peroxide indexes increased along with the storage time. However packages with lower oxygen and moisture permeability, such as PET and POL, minimized such changes, being therefore the most suitable for long-term storage.

CH Packaging Program Guidance

International Nuclear Information System (INIS)

2008-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the pplication.' They further state: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) 71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations

CH Packaging Program Guidance

International Nuclear Information System (INIS)

2009-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.' They further state: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) 71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations

RH Packaging Program Guidance

International Nuclear Information System (INIS)

2008-01-01

The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package (also known as the 'RH-TRU 72-B cask') and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.' It further states: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M and O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) 71.8, 'Deliberate Misconduct.' Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, 'Packaging and Transportation of Radioactive Material,' certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, 'Reporting of Defects and Noncompliance,' regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous

RH Packaging Program Guidance

International Nuclear Information System (INIS)

2006-01-01

The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: 'each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.' It further states: 'each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.' Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M and O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 Code of Federal Regulations (CFR) 1.8, 'Deliberate Misconduct.' Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, 'Packaging and Transportation of Radioactive Material,' certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, 'Reporting of Defects and Noncompliance,' regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these

Safety analysis report: packages. LP-12 tritium package (packaging of fissile and other radioactive materials). Final report

International Nuclear Information System (INIS)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.

1975-05-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-12) within an aluminum vessel and surrounded by 3.9 in.-thick Celotex insulation in a steel drum. Information is presented on the packaging design, evaluation of the structural, thermal, containment, shielding, and criticality characteristics of the package, procedures for loading, unloading, transporting, and testing the LP-12, and quality assurance requirements. (U.S.)

40 CFR 157.27 - Unit packaging.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Unit packaging. 157.27 Section 157.27 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PACKAGING REQUIREMENTS FOR PESTICIDES AND DEVICES Child-Resistant Packaging § 157.27 Unit packaging. Pesticide products...

CH Packaging Program Guidance

International Nuclear Information System (INIS)

2005-01-01

The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: ''each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application.'' They further state: ''each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP charges the Waste Isolation Pilot Plant (WIPP) management and operating (M and O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) 71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.

The MOBO City: A Mobile Game Package for Technical Language Learning

OpenAIRE

Faranak Fotouhi-Ghazvini; Rae Earnshaw; David Robison; Peter Excell

2009-01-01

In this research we produced a mobile language learning game that is designed within a technical context. After conceptual analysis of the subject matter i.e. computer’s motherboard, the game was designed. The action within the game is consistent to the theme. There is a story, simplifying and exaggerating real life. Elements of control, feedback and sense of danger are incorporated into our game. By producing an engaging learning experience, vocabularies were learned incidentally. Deliberate...

40 CFR 262.30 - Packaging.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Packaging. 262.30 Section 262.30... APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Pre-Transport Requirements § 262.30 Packaging. Before... the waste in accordance with the applicable Department of Transportation regulations on packaging...

LEARNING TOOLS INTEROPERABILITY – A NEW STANDARD FOR INTEGRATION OF DISTANCE LEARNING PLATFORMS

Directory of Open Access Journals (Sweden)

Oleksandr A. Shcherbyna

2015-06-01

Full Text Available For information technology in education there is always an issue of re-usage of electronic educational resources, their transferring possibility from one virtual learning environment to another. Previously, standardized sets of files were used to serve this purpose, for example, SCORM-packages. In this article the new standard Learning Tools Interoperability (LTI is reviewed, which allows users from one environment to access resources from another environment. This makes it possible to integrate them into a single distributed learning environment that is created and shared. The article gives examples of the practical use of standard LTI in Moodle learning management system using External tool and LTI provider plugins.

Project monitoring package (PMP) : A package for project activity monitoring

International Nuclear Information System (INIS)

Vyas, K.N.; Kannan, A.; Susandhi, R.; Basu, S.

1987-01-01

A package for preparing PERT/CPM network diagrams has been written for PDP-11/34. The program uses PLOT-10 library calls for device interfacing. The package is essentially non-interactive in nature, and reads input data in the form of activity description and duration. It calculates the critical path time and performs time scaling of the events. The report gives a brief outline of the logic used, a sample plot and tabular output for reference. An additional facility for performing project activity monitoring has also been implemented. Activity monitoring generally requires various reports such as feed back reports from various group co-ordinators, information report for project co-ordinator and brief periodical reports for management. A package 'DATATRIEVE' (DTR) on PDP-11/34 system is utilized for generating the above mentioned reports. As DTR can also use normal sequential files, an interfacing program has been written which reformats the files accepted by PERT program acceptable to DTR. Various types of reports as generated by DTR are included. However this part of the package is not transportable and can be implemented only on systems having DTR. 6 figures. (author)

Learning experiences in population education: proposed guidelines and core messages.

Science.gov (United States)

1984-01-01

As a result of the 1984 Regional Workshop for the Development of Packages of Adequate Learning Requirements in Population Education, the participants tackled the problem of non-institutionalization of population education into the formal and non-formal educational curricula in their countries. Based on their deliberations, several sets of guidelines and core messages were formulated to provide countries with a more definite direction that will hopefully ensure the functional and effective integration of population education in their respective national school and out-of-school curriculum system. Useful packages of learning materials in population education should help realize the country's population policy and goals within the broader framework of socioeconomic development, and the content of the package should comprehensively cover the core messages of the country's Population Information, Education and Communication (IEC) Program. The population knowledge base of the package should be accurate and relevant; the package should provide for graphic and visual presentation and for assessment of effects on the target groups. Proposed core messages in population education discuss the advantages of small family size and delayed marriage, and aspects of responsible parenthood. Other messages discuss population resource development and population-related beliefs and values.

Perfume Packaging, Seduction and Gender

Directory of Open Access Journals (Sweden)

Magdalena Petersson McIntyre

2013-06-01

Full Text Available This article examines gender and cultural sense-making in relation to perfumes and their packaging. Gendered meanings of seduction, choice, consumption and taste are brought to the fore with the use of go-along interviews with consumers in per-fume stores. Meeting luxury packages in this feminized environment made the interviewed women speak of bottles as objects to fall in love with and they de-scribed packages as the active part in an act of seduction where they were expect-ing packages to persuade them into consumption. The interviewed men on the other hand portrayed themselves as active choice-makers and stressed that they were always in control and not seduced by packaging. However, while their ways of explaining their relationship with packaging on the surface seems to confirm cultural generalizations in relation to gender and seduction, the article argues that letting oneself be seduced is no less active than seducing. Based on a combination of actor network theories and theories of gender performativity the article points to the agency of packaging for constructions of gender and understands the inter-viewees as equally animated by the flows of passion which guide their actions.

Naval Waste Package Design Sensitivity

International Nuclear Information System (INIS)

T. Schmitt

2006-01-01

The purpose of this calculation is to determine the sensitivity of the structural response of the Naval waste packages to varying inner cavity dimensions when subjected to a comer drop and tip-over from elevated surface. This calculation will also determine the sensitivity of the structural response of the Naval waste packages to the upper bound of the naval canister masses. The scope of this document is limited to reporting the calculation results in terms of through-wall stress intensities in the outer corrosion barrier. This calculation is intended for use in support of the preliminary design activities for the license application design of the Naval waste package. It examines the effects of small changes between the naval canister and the inner vessel, and in these dimensions, the Naval Long waste package and Naval Short waste package are similar. Therefore, only the Naval Long waste package is used in this calculation and is based on the proposed potential designs presented by the drawings and sketches in References 2.1.10 to 2.1.17 and 2.1.20. All conclusions are valid for both the Naval Long and Naval Short waste packages

Radioactive material packaging performance testing

International Nuclear Information System (INIS)

Romano, T.

1992-06-01

In an effort to provide uniform packaging of hazardous material on an international level, recommendations for the transport of dangerous goods have been developed by the United Nations. These recommendations are performance oriented and contrast with a large number of packaging specifications in the US Department of Transportation's hazard materials regulations. This dual system presents problems when international shipments enter the US Department of Transportation's system. Faced with the question of continuing a dual system or aligning with the international system, the Research and Special Programs Administration of the US Department of Transportation responded with Docket HM-181. This began the transition toward the international transportation system. Following close behind is Docket HM-169A, which addressed low specific activity radioactive material packaging. This paper will discuss the differences between performance-oriented and specification packaging, the transition toward performance-oriented packaging by the US Department of Transportation, and performance-oriented testing of radioactive material packaging by Westinghouse Hanford Company. Dockets HM-181 and HM-169A will be discussed along with Type A (low activity) and Type B (high activity) radioactive material packaging evaluations

RASPLAV package

International Nuclear Information System (INIS)

1990-01-01

The RASPLAV package for investigation of post-accident mass transport and heat transfer processes is presented. The package performs three dimensional thermal conduction calculations in space nonuniform and temperature dependent conductivities and variable heat sources, taking into account phase transformations. The processes of free-moving bulk material, mixing of melting fuel due to advection and dissolution, and also evaporation/adsorption are modelled. Two-dimensional hydrodynamics with self-consistent heat transfer are also performed. The paper briefly traces the ways the solution procedures are carried out in the program package and outlines the major results of the simulation of reactor vessel melting after a core meltdown. The theoretical analysis and the calculations in this case were carried out in order to define the possibility of localization of the zone reminders. The interactions between the reminders and the concrete are simulated and evaluation of the interaction parameters is carried out. 4 refs. (R.Ts)

7 CFR 58.640 - Packaging.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging. 58.640 Section 58.640 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.640 Packaging. The packaging of the semifrozen product shall be done by means which will in...

Emergency response packaging: A conceptual outline

International Nuclear Information System (INIS)

Luna, R.E.; McClure, J.D.; Bennett, P.C.; Wheeler, T.A.

1992-01-01

The Packaging and Transportation Needs in the 1990's (PATN) component of the Transportation Assessment and Integration (TRAIN) program (DOE Nov. 1991) was designed to survey United States Department of Energy programs, both ongoing and planned, to identify needs for packaging and transportation services over the next decade. PATN also identified transportation elements that should be developed by the DOE Office of Environmental Restoration and Waste Management (DOE EM) Transportation Management Program (TMP). As a result of the predominant involvement of the TMP in radioactive material shipment issues and DOE EM's involvement with waste management issues, the primary focus of PATN was on waste packaging issues. Pending DOE regulations will formalize federal guidelines and regulations for transportation of hazardous and radioactive materials within the boundaries of DOE reservations and facilities and reflect a growing awareness of concern regarding safety environmental responsibility activities on DOE reservations. Future practices involving the transportation of radioactive material within DOE reservations will closely parallel those used for commercial and governmental transportation across the United States. This has added to the perceived need for emergency recovery packaging and emergency response features on primary packaging, for both on-site shipments and shipments between DOE facilities (off-site). Historically, emergency response and recovery functions of packaging have not been adequately considered in packaging design and construction concepts. This paper develops the rationale for emergency response packaging, including both overpack concepts for repackaging compromised packaging and primary packaging redesign to facilitate the recovery of packages via mobile remote handling equipment. The rationale will examine concepts for determination of likely use patterns to identify types of shipments where recovery packaging may have the most favorable payoff

Sustainable packaging. Packaging for a circular economy; Duurzaam verpakken. Verpakken voor de circulaire economie

Energy Technology Data Exchange (ETDEWEB)

Haffmans, S. [Partners for Innovation, Amsterdam (Netherlands); Standhardt, G. [Nederlands Verpaskkingscentrum NVC, Gouda (Netherlands); Hamer, A. [Agentschap NL, Utrecht (Netherlands)

2013-10-15

What is Sustainable Packaging? And what is the most sustainable packaging for a product? The publication is intended for anyone who wants to take into account the environment in the design of a product and packaging. It offers concrete suggestions and inspiring examples to bring sustainable packaging into practice [Dutch] Wat is Duurzaam Verpakken? En wat is de duurzaamste verpakking voor mijn product? De publicatie is bestemd voor iedereen die rekening wil houden met het milieu bij het ontwerp van een product-verpakkingscombinatie. Ze biedt concrete aanknopingspunten en inspirerende voorbeelden om hier praktisch mee aan de slag te gaan.

Implementation of standards within eLearning information systems

OpenAIRE

Roman Malo

2007-01-01

Nowadays, eLearning standards' support within eLearning systems is much discussed problem. In this problem domain especially the reference model SCORM must be considered. This de-facto standard is a package of common standards and specifications used for the standardization of eLearning activities as eLearning content preparation, using e-course, communication etc. Implementation of standards itself is a process with great difficulty and time requests. Interesting and considerable approach to...

AN ADA NAMELIST PACKAGE

Science.gov (United States)

Klumpp, A. R.

1994-01-01

The Ada Namelist Package, developed for the Ada programming language, enables a calling program to read and write FORTRAN-style namelist files. A namelist file consists of any number of assignment statements in any order. Features of the Ada Namelist Package are: the handling of any combination of user-defined types; the ability to read vectors, matrices, and slices of vectors and matrices; the handling of mismatches between variables in the namelist file and those in the programmed list of namelist variables; and the ability to avoid searching the entire input file for each variable. The principle user benefits of this software are the following: the ability to write namelist-readable files, the ability to detect most file errors in the initialization phase, a package organization that reduces the number of instantiated units to a few packages rather than to many subprograms, a reduced number of restrictions, and an increased execution speed. The Ada Namelist reads data from an input file into variables declared within a user program. It then writes data from the user program to an output file, printer, or display. The input file contains a sequence of assignment statements in arbitrary order. The output is in namelist-readable form. There is a one-to-one correspondence between namelist I/O statements executed in the user program and variables read or written. Nevertheless, in the input file, mismatches are allowed between assignment statements in the file and the namelist read procedure statements in the user program. The Ada Namelist Package itself is non-generic. However, it has a group of nested generic packages following the nongeneric opening portion. The opening portion declares a variety of useraccessible constants, variables and subprograms. The subprograms are procedures for initializing namelists for reading, reading and writing strings. The subprograms are also functions for analyzing the content of the current dataset and diagnosing errors. Two nested

21 CFR 820.130 - Device packaging.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device packaging. 820.130 Section 820.130 Food and... QUALITY SYSTEM REGULATION Labeling and Packaging Control § 820.130 Device packaging. Each manufacturer shall ensure that device packaging and shipping containers are designed and constructed to protect the...

76 FR 30551 - Specifications for Packagings

Science.gov (United States)

2011-05-26

... design qualification test and each periodic retest on a packaging, a test report must be prepared. The... where the design qualification tests are conducted, for as long as the packaging is produced and for at... report; (5) Manufacturer of the packaging; (6) Description of the packaging design type (e.g. dimensions...

E-learning Programmes and Courses Evaluation Report

DEFF Research Database (Denmark)

Badger, Merete; Prag, Sidsel-Marie Winther; Monaco, Lucio

the development, testing, and evaluation of a series of applications for training and entrepreneurship in the field of sustainable energy (project work package 2, 3, and 4). This report describes the project outcomes related to this work stream with focus on E-learning programmes and courses. It represents...... the project deliverable “D3.4 E-learning Programmes and Courses Evaluation Report”. The applications developed for entrepreneurship will be described and evaluated in the project deliverable “D4.3 e-link evaluation report”. The second work stream (work package 5) covers the development of E......-infrastructure eduGAIN2. The access point is a web portal – the VCH Portal – which is used to manage users and groups. The E-infrastructure of VCH will be described and evaluated in the project deliverable “5.4 Virtual Campus Hub Technology Evaluation Report”. The E-learning applications described in this report...

Package Formats for Preserved Digital Material

DEFF Research Database (Denmark)

Zierau, Eld

2012-01-01

This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up requireme......This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up...... requirements for package formats used for long term preserved digital material, and using these requirements as the basis for analysing a range of package formats. The result of the concrete investigation is that the WARC format is the package format best suited for the listed requirements. Fulfilling...

Directory of Certificates of Compliance for Radioactive-Materials Packages. Summary report of NRC approved packages

International Nuclear Information System (INIS)

1983-01-01

This directory contains a Summary Report of the US Nuclear Regulatory Commission's Approved Packages (Volume I), all Certificates of Compliance (Volume 2), and Summary Report of NRC Approved Quality Assurance Programs (Volume 3) for Radioactive Material Packages effective December 31, 1982. The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volumes 1 and 2 of the directory. A listing by packaging types is included in the back of Volume 2. An alphabetical listing by company name is included in the back of Volume 3 for approved QA programs. The Summary Reports include a listing of all users of each package design and approved QA programs prior to the publication date of the directory

9 CFR 354.72 - Packaging.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Packaging. 354.72 Section 354.72... CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Supervision of Marking and Packaging § 354.72 Packaging. No container which bears or may bear any official identification or any abbreviation...

Antimicrobial packaging with natural compunds - a review

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2016-12-01

Full Text Available Background:  Packaging problems are an integral part of logistics and the implementation of packaging significantly affects the effectiveness of logistics processes, as a factor which increases the safety and the quality of products being transported. Active packaging is an area of technology needed to meet the requirements of the contemporary consumer. Active packaging creates additional opportunities in systems for packing goods, as well as offering a solution in which the packaging, the product and surroundings interact. Furthermore, active packaging allows packaging to interact with food and the environment and play a dynamic role in food preservation. The main role of antimicrobial packaging is to inhibit the growth of microorganisms that reduce the quality of the packaged product. Methods: The application of natural antimicrobial agents appears to be safe for food products. Also, these compounds have potential applications as a natural preservative in the food packaging industry. This study presents some antibacterial agents, namely chitosan, nisin and pectins. Results and conclusion: Natural substances used in active packaging can eliminate the danger of chemical substances migrating to food.

Overview of the DOE packaging certification process

Energy Technology Data Exchange (ETDEWEB)

Liu, Y.Y.; Carlson, R.D. [Argonne National Lab., IL (United States); Carlson, R.W. [Lawrence Livermore National Lab., CA (United States); Kapoor, A. [USDOE, Washington, DC (United States)

1995-12-31

This paper gives an overview of the DOE packaging certification process, which is implemented by the Office of Facility Safety Analysis, under the Assistance Secretary for Environment, Safety and Health, for packagings that are not used for weapons and weapons components, nor for naval nuclear propulsion. The overview will emphasize Type B packagings and the Safety Analysis Report for Packaging (SARP) review that parallels the NRC packaging review. Other important elements in the DOE packaging certification program, such as training, methods development, data bases, and technical assistance, are also emphasized, because they have contributed significantly to the improvement of the certification process since DOE consolidated its packaging certification function in 1985. The paper finishes with a discussion of the roles and functions of the DOE Packaging Safety Review Steering Committee, which is chartered to address issues and concerns of interest to the DOE packaging and transportation safety community. Two articles related to DOE packaging certification were published earlier on the SARP review procedures and the DOE Packaging Review Guide. These articles may be consulted for additional information.

The immediate effect of individual manipulation techniques on pulmonary function measures in persons with chronic obstructive pulmonary disease.

Science.gov (United States)

Noll, Donald R; Johnson, Jane C; Baer, Robert W; Snider, Eric J

2009-10-08

The use of manipulation has long been advocated in the treatment of chronic obstructive pulmonary disease (COPD), but few randomized controlled clinical trials have measured the effect of manipulation on pulmonary function. In addition, the effects of individual manipulative techniques on the pulmonary system are poorly understood. Therefore, the purpose of this study was to determine the immediate effects of four osteopathic techniques on pulmonary function measures in persons with COPD relative to a minimal-touch control protocol. Persons with COPD aged 50 and over were recruited for the study. Subjects received five, single-technique treatment sessions: minimal-touch control, thoracic lymphatic pump (TLP) with activation, TLP without activation, rib raising, and myofascial release. There was a 4-week washout period between sessions. Protocols were given in random order until all five techniques had been administered. Pulmonary function measures were obtained at baseline and 30-minutes posttreatment. For the actual pulmonary function measures and percent predicted values, Wilcoxon signed rank tests were used to test within-technique changes from baseline. For the percent change from baseline, Friedman tests were used to test for between-technique differences. Twenty-five subjects were enrolled in the study. All four tested osteopathic techniques were associated with adverse posttreatment changes in pulmonary function measures; however, different techniques changed different measures. TLP with activation increased posttreatment residual volume compared to baseline, while TLP without activation did not. Side effects were mild, mostly posttreatment chest wall soreness. Surprisingly, the majority of subjects believed they could breathe better after receiving osteopathic manipulation. In persons with COPD, TLP with activation, TLP without activation, rib raising, and myofascial release mildly worsened pulmonary function measures immediately posttreatment relative to

Application of a newly built semi-submersible vessel for transportation of a tension leg platform

Science.gov (United States)

Zhang, Dagang; Sun, Weiying; Fan, Zhixia

2012-09-01

Transportation of tension leg platform (TLP) structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and their availability is limited. To prepare for the future development of South China Sea deepwater projects, the China Offshore Oil Engineering Corporation has recently built a heavy lift transport vessel-Hai Yang Shi You 278. This semi-submersible vessel has a displacement capacity of 50k DWT, and a breath of 42 meters. Understanding the vessel's applicability and preparing it for use in future deepwater projects are becoming imminent needs. This paper reviews the current critical issues associated with TLP transportation and performs detailed analysis of the designed TLP during load-out and transportation. The newly built COOEC transportation vessel HYSY 278 was applied to dry transport of the TLP structure from the COOEC fabrication yard in Qingdao to an oil field in South China Sea. The entire process included the load-out of the TLP structure from the landsite of the fabrication yard, the offloading and float-on of the platform from the vessel, the dry transport of the TLP over a long distance, and the final offloading of the platform. Both hydrodynamic and structure analysis were performed to evaluate the behavior of the transport vessel and TLP structure. Special attention was paid to critical areas associated with the use of this new vessel, along with any potential limitations. The results demonstrate that HYSY 278 can effectively be used for transporting the structure with proper arrangement and well-prepared operation. The procedure and details were presented on the basis of the study results. Special attention was also given to discussion on future use based on the results from the analysis.

A flexible R package for nonnegative matrix factorization

Directory of Open Access Journals (Sweden)

Seoighe Cathal

2010-07-01

Full Text Available Abstract Background Nonnegative Matrix Factorization (NMF is an unsupervised learning technique that has been applied successfully in several fields, including signal processing, face recognition and text mining. Recent applications of NMF in bioinformatics have demonstrated its ability to extract meaningful information from high-dimensional data such as gene expression microarrays. Developments in NMF theory and applications have resulted in a variety of algorithms and methods. However, most NMF implementations have been on commercial platforms, while those that are freely available typically require programming skills. This limits their use by the wider research community. Results Our objective is to provide the bioinformatics community with an open-source, easy-to-use and unified interface to standard NMF algorithms, as well as with a simple framework to help implement and test new NMF methods. For that purpose, we have developed a package for the R/BioConductor platform. The package ports public code to R, and is structured to enable users to easily modify and/or add algorithms. It includes a number of published NMF algorithms and initialization methods and facilitates the combination of these to produce new NMF strategies. Commonly used benchmark data and visualization methods are provided to help in the comparison and interpretation of the results. Conclusions The NMF package helps realize the potential of Nonnegative Matrix Factorization, especially in bioinformatics, providing easy access to methods that have already yielded new insights in many applications. Documentation, source code and sample data are available from CRAN.

Safety analysis report: packages. LP-50 tritium package (packaging of fissile and other radioactive materials). Final report

International Nuclear Information System (INIS)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.

1975-04-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) sealed within an aluminum vessel and surrounded by a minimum of 4-in. thick Celotex insulation in a steel drum. The structural, thermal, containment, shielding, and criticality safety aspects of this package are evaluated. Procedures for loading and unloading, empty cask transport, acceptance testing and maintenance, and quality assurance requirements for the LP-50 package are described in detail. (U.S.)

Safety analysis report; packages LP-50 tritium package. (Packaging of fissile and other radioactive materials). Final report

International Nuclear Information System (INIS)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.; Chalfant, G.G.

1975-05-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) surrounded by an aluminum vessel and Celotex insulation at least 4 in. thick in a steel drum. The total weight of the package is 260 lbs maximum. The various components that constitute the package are described and are shown in 7 figures. The safety analysis includes: structural evaluations; thermal evaluations; containment; operating procedures; acceptance tests and maintenance program; and design review

Large transport packages for decommissioning waste

International Nuclear Information System (INIS)

Price, M.S.T.

1988-08-01

This document reports progress on a study of large transport packages for decommissioning waste and is the semi-annual report for the period 1 January - 30 June 1988. The main tasks performed during the period related to the assembly of package design criteria ie those aspects of manufacture, handling, storage, transport and disposal which impose constraints on design. This work was synthesised into a design specification for packages which formed the conclusion of that task and was the entry into the final task - the development of package design concepts. The design specifications, which concentrated on the Industrial Package category of the IAEA Transport Regulations, has been interpreted for the two main concepts (a) a self-shielded package disposed of in its entirety and (b) a package with returnable shielding. Preliminary information has been prepared on the cost of providing the package as well as transport to a repository and disposal. There is considerable uncertainty about the cost of disposal and variations of over a factor of 10 are possible. Under these circumstances there is merit in choosing a design concept which is relatively insensitive to disposal cost variations. The initial results indicate that on these grounds the package with returnable shielding is preferred. (author)

RF and microwave microelectronics packaging II

CERN Document Server

Sturdivant, Rick

2017-01-01

Reviews RF, microwave, and microelectronics assembly process, quality control, and failure analysis Bridges the gap between low cost commercial and hi-res RF/Microwave packaging technologies Engages in an in-depth discussion of challenges in packaging and assembly of advanced high-power amplifiers This book presents the latest developments in packaging for high-frequency electronics. It is a companion volume to “RF and Microwave Microelectronics Packaging” (2010) and covers the latest developments in thermal management, electrical/RF/thermal-mechanical designs and simulations, packaging and processing methods, and other RF and microwave packaging topics. Chapters provide detailed coverage of phased arrays, T/R modules, 3D transitions, high thermal conductivity materials, carbon nanotubes and graphene advanced materials, and chip size packaging for RF MEMS. It appeals to practicing engineers in the electronic packaging and high-frequency electronics domain, and to academic researchers interested in underst...

Fullrmc, a rigid body Reverse Monte Carlo modeling package enabled with machine learning and artificial intelligence.

Science.gov (United States)

Aoun, Bachir

2016-05-05

A new Reverse Monte Carlo (RMC) package "fullrmc" for atomic or rigid body and molecular, amorphous, or crystalline materials is presented. fullrmc main purpose is to provide a fully modular, fast and flexible software, thoroughly documented, complex molecules enabled, written in a modern programming language (python, cython, C and C++ when performance is needed) and complying to modern programming practices. fullrmc approach in solving an atomic or molecular structure is different from existing RMC algorithms and software. In a nutshell, traditional RMC methods and software randomly adjust atom positions until the whole system has the greatest consistency with a set of experimental data. In contrast, fullrmc applies smart moves endorsed with reinforcement machine learning to groups of atoms. While fullrmc allows running traditional RMC modeling, the uniqueness of this approach resides in its ability to customize grouping atoms in any convenient way with no additional programming efforts and to apply smart and more physically meaningful moves to the defined groups of atoms. In addition, fullrmc provides a unique way with almost no additional computational cost to recur a group's selection, allowing the system to go out of local minimas by refining a group's position or exploring through and beyond not allowed positions and energy barriers the unrestricted three dimensional space around a group. © 2016 Wiley Periodicals, Inc.

49 CFR 173.3 - Packaging and exceptions.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Packaging and exceptions. 173.3 Section 173.3... SHIPMENTS AND PACKAGINGS General § 173.3 Packaging and exceptions. (a) The packaging of hazardous materials.... standard packaging must be open to inspection by a representative of the Department. (b) The regulations...

Active Learning in Introductory Climatology.

Science.gov (United States)

Dewey, Kenneth F.; Meyer, Steven J.

2000-01-01

Introduces a software package available for the climatology curriculum that determines possible climatic events according to a long-term climate history. Describes the integration of the software into the curriculum and presents examples of active learning. (Contains 19 references.) (YDS)

Materials for advanced packaging

CERN Document Server

Wong, CP

2017-01-01

This second edition continues to be the most comprehensive review on the developments in advanced electronic packaging technologies, with a focus on materials and processing. Recognized experts in the field contribute to 22 updated and new chapters that provide comprehensive coverage on various 3D package architectures, novel bonding and joining techniques, wire bonding, wafer thinning techniques, organic substrates, and novel approaches to make electrical interconnects between integrated circuit and substrates. Various chapters also address advances in several key packaging materials, including: Lead-free solders Flip chip underfills Epoxy molding compounds Conductive adhesives Die attach adhesives/films Thermal interface materials (TIMS) Materials for fabricating embedded passives including capacitors, inductors, and resistors Materials and processing aspects on wafer-level chip scale package (CSP) and MicroElectroMechanical system (MEMS) Contributors also review new and emerging technologies such as Light ...

Biobased Packaging - Application in Meat Industry

Directory of Open Access Journals (Sweden)

S. Wilfred Ruban

2009-04-01

Full Text Available Because of growing problems of waste disposal and because petroleum is a nonrenewable resource with diminishing quantities, renewed interest in packaging research is underway to develop and promote the use of “bio-plastics.” In general, compared to conventional plastics derived from petroleum, bio-based polymers have more diverse stereochemistry and architecture of side chains which enable research scientists a greater number of opportunities to customize the properties of the final packaging material. The primary challenge facing the food (Meat industry in producing bio-plastic packaging, currently, is to match the durability of the packaging with product shelf-life. Notable advances in biopolymer production, consumer demand for more environmentally-friendly packaging, and technologies that allow packaging to do more than just encompass the food are driving new and novel research and developments in the area of packaging for muscle foods. [Vet. World 2009; 2(2.000: 79-82

Hermeticity of electronic packages

CERN Document Server

Greenhouse, Hal; Romenesco, Bruce

2011-01-01

This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the packageùespecially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to so

Hermeticity of electronic packages

CERN Document Server

Greenhouse, Hal

2000-01-01

This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the package-especially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to so

Directory of certificates of compliance for radioactive materials packages; Summary Report of NRC Approved Packages

International Nuclear Information System (INIS)

1980-12-01

This directory contains a Summary Report of NRC approved Packages (Volume 1), Certificates of Compliance (Volume 2), and a Summary Report of NRC Approved Quality Assurance Programs for Radioactive Material Packages (Volume 3). The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the U.S. Nuclear Regulatory Commission. To assist in identifying packaging, and index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory. The Summary Report includes a listing of all users of each package design prior to the publication date of the directory. Shipments of radioactive material using these packagings must be in accordance with the provisions of 49 CFR 173.393a and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure them--that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program

Energy and packaging

Energy Technology Data Exchange (ETDEWEB)

Boustead, I; Hancock, G F

1981-01-01

Information is given on the energy and raw materials required in the production and use of containers used to package beer, cider, and carbonated soft drinks in the United Kingdom. Topics covered include: methodology of energy analysis, primary and secondary fuels, transport, packaging materials, including glass, aluminum, iron, steel, and tinplate, container production, including plastic bottles, distribution of empty containers, filling and packing, distribution, and disposal. (LEW)

Bringing problem based learning to life using virtual reality.

Science.gov (United States)

Nelson, Linda; Sadler, Lynne; Surtees, Geoffrey

2005-03-01

Recent UK government policy advocates the need for a more flexible approach to nurse education and ;Fitness for Practice' stresses the importance of information technology and computer mediated learning facilities in the future of nursing education [Department of Health, Making a Difference, Strengthening the Nursing, Midwifery and Health Visiting Contribution to Health Care, Department of Health, 1999; The United Kingdom Central Council For Nursing, Fitness for Practice, The UKCC Commission for Nursing and Midwifery Education, 1999]. In response to this recommendation, a virtual reality package has been designed as a learning resource within adult pre-registration nursing education. This learning and teaching strategy is used in conjunction with problem based learning, enabling students to visualise individual/family life in a community setting. Students are encouraged to consider wider issues such as social and environmental factors and their impact upon health. The virtual reality package acts as one of a number of triggers. This paper will discuss the early development and offer an example of its use as a learning and teaching strategy within year two of a three year programme.

Signalling product healthiness through symbolic package cues: Effects of package shape and goal congruence on consumer behaviour.

Science.gov (United States)

van Ooijen, Iris; Fransen, Marieke L; Verlegh, Peeter W J; Smit, Edith G

2017-02-01

Three studies show that product packaging shape serves as a cue that communicates healthiness of food products. Inspired by embodiment accounts, we show that packaging that simulates a slim body shape acts as a symbolic cue for product healthiness (e.g., low in calories), as opposed to packaging that simulates a wide body shape. Furthermore, we show that the effect of slim package shape on consumer behaviour is goal dependent. Whereas simulation of a slim (vs. wide) body shape increases choice likelihood and product attitude when consumers have a health-relevant shopping goal, packaging shape does not affect these outcomes when consumers have a hedonic shopping goal. In Study 3, we adopt a realistic shopping paradigm using a shelf with authentic products, and find that a slim (as opposed to wide) package shape increases on-shelf product recognition and increases product attitude for healthy products. We discuss results and implications regarding product positioning and the packaging design process. Copyright © 2016 Elsevier Ltd. All rights reserved.

ACTIVE PACKAGING SYSTEM FOR MEAT AND MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Adriana Pavelková

2012-10-01

Full Text Available In the recent past, food packaging was used to enable marketing of products and to provide passive protection against environmental contaminations or influences that affect the shelf life of the products. However, unlike traditional packaging, which must be totally inert, active packaging is designed to interact with the contents and/or the surrounding environment. Interest in the use of active packaging systems for meat and meat products has increased in recent years. Active packaging systems are developed with the goal of extending shelf life for foods and increasing the period of time that the food is high quality. Developments in active packaging have led to advances in many areas, including delayed oxidation and controlled respiration rate, microbial growth, and moisture migration. Active packaging technologies include some physical, chemical, or biological action which changes interactions between a package, product, and/or headspace of the package in order to get a desired outcome. Active packaging systems discussed include oxygen scavengers, carbon dioxide scavengers and emitters, moisture control agents, flavour/odour absorbers and releasers  and antimicrobial packaging technologies. Active packaging is typically found in two types of systems; sachets and pads which are placed inside of packages, and active ingredients that are incorporated directly into packaging materials.  Recognition of the benefits of active packaging technologies by the food industry, development of economically viable packaging systems and increased consumer acceptance is necessary for commercial realisation of these packaging technologies.doi:10.5219/205

Power Electronics Packaging Reliability | Transportation Research | NREL

Science.gov (United States)

Packaging Reliability Power Electronics Packaging Reliability A photo of a piece of power electronics laboratory equipment. NREL power electronics packaging reliability research investigates the electronics packaging around a semiconductor switching device determines the electrical, thermal, and

The use of computer assisted technology to enhance student psychiatric nurses learning during a practice placement.

Science.gov (United States)

Denny, Margaret; Higgins, Agnes

2003-06-01

Despite the available literature that identifies the value of integrating computer-assisted learning into the curriculum, psychiatric nurse education lags behind in this area of curriculum development. The purpose of this paper is to report on a pilot project involving the use of a computer assisted learning (CAL) interactive multimedia (IMM) package called 'Admissions,' as a self-directed learning tool with two-second year psychiatric nursing students. The students were on a practice placement in an Irish mental health service. The aim of using the multimedia resource was to augment the students' learning during their practice placement and enable them to re-examine the issue of psychosis from a multiplicity of perspectives. This paper provides a brief description of the interactive multimedia package, together with a discussion on the support offered to the students during its use. experiential taxonomy is used as a framework to guide the discussion on the learning and evaluation process used. Feedback from the students suggests that the CAL package is easy to use, informative and promoted independence and self-directed study.

Development of waste packages for TRU-disposal. 5. Development of cylindrical metal package for TRU wastes

International Nuclear Information System (INIS)

Mine, Tatsuya; Mizubayashi, Hiroshi; Asano, Hidekazu; Owada, Hitoshi; Otsuki, Akiyoshi

2005-01-01

Development of the TRU waste package for hulls and endpieces compression canisters, which include long-lived and low sorption nuclides like C-14 is essential and will contribute a lot to a reasonable enhancement of safety and economy of the TRU-disposal system. The cylindrical metal package made of carbon steel for canisters to enhance the efficiency of the TRU-disposal system and to economically improve their stacking conditions was developed. The package is a welded cylindrical construction with a deep drawn upper cover and a disc plate for a bottom cover. Since the welding is mainly made only for an upper cover and a bottom disc plate, this package has a better containment performance for radioactive nuclide and can reduce the cost for construction and manufacturing including its welding control. Furthermore, this package can be laid down in pile for stacking in the circular cross section disposal tunnel for the sedimentary rock, which can drastically minimize the space for disposal tunnel as mentioned previously in TRU report. This paper reports the results of the study for application of newly developed metal package into the previous TRU-disposal system and for the stacking equipment for the package. (author)

The development of a digital signal processing and plotting package to support testing of hazardous and radioactive material packages

International Nuclear Information System (INIS)

Ludwigsen, J.S.; Uncapher, W.L.; Arviso, M.; Lattier, C.N.; Hankinson, M.; Cannone, D.J.

1995-01-01

Federal regulations allow package designers to use analysis, testing, or a combination of analysis and testing to support certification of packages used to transport hazardous or radioactive materials. In recent years, many certified packages were subjected to a combination of analysis and testing. A major part of evaluating structural or thermal package response is the collection, reduction and presentation of instrumentation measurement data. Sandia National Laboratories, under the sponsorship of the US Department of Energy, has developed a comprehensive analysis and plotting package (known as KAPP) that performs digital signal processing of both transient structural and thermal data integrated with a comprehensive plotting package designed to support radioactive material package testing

The development of a packaging handbook

International Nuclear Information System (INIS)

Shappert, L.B.

1994-01-01

The Packaging Handbook, dealing with the development of packagings designed to carry radioactive material, is being written for DOE's Transportation and Packaging Safety Division. The primary goal of the Handbook is to provide sufficient technical information and guidance to improve the quality of Safety Analysis Reports on Type B Packagings (SARPs) that are submitted to DOE for certification. This paper provides an update on the status of the Handbook

Smart packaging systems for food applications: a review.

Science.gov (United States)

Biji, K B; Ravishankar, C N; Mohan, C O; Srinivasa Gopal, T K

2015-10-01

Changes in consumer preference for safe food have led to innovations in packaging technologies. This article reviews about different smart packaging systems and their applications in food packaging, packaging research with latest innovations. Active and intelligent packing are such packaging technologies which offer to deliver safer and quality products. Active packaging refers to the incorporation of additives into the package with the aim of maintaining or extending the product quality and shelf life. The intelligent systems are those that monitor the condition of packaged food to give information regarding the quality of the packaged food during transportation and storage. These technologies are designed to the increasing demand for safer foods with better shelf life. The market for active and intelligent packaging systems is expected to have a promising future by their integration into packaging materials or systems.

Development directions of packaging made from polymer materials

Directory of Open Access Journals (Sweden)

Jovanović Slobodan

2011-01-01

Full Text Available World packaging market achieves turnover of about $620 billion per year with one third of this amount being associated to packaging made from polymer materials. It is expected that this kind of packaging consumption will hold at least 3% of world packaging market share in the next five years and that it will surpass the consumption of all other materials used in the packaging production. This can be contributed to product quality, low production costs as well as significant investments made in the development of polymer materials, packaging technology and packaging. This paper presents some development directions for packaging made from polymer materials, such as: packaging in the protective atmosphere, the use of active and intelligent packaging, and the use of biopolymers and recycled polymers for packaging production that come into direct contact with the packed product.

49 CFR 178.915 - General Large Packaging standards.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false General Large Packaging standards. 178.915 Section... PACKAGINGS Large Packagings Standards § 178.915 General Large Packaging standards. (a) Each Large Packaging.... Large Packagings intended for solid hazardous materials must be sift-proof and water-resistant. (b) All...

Directory of certificates of compliance for radioactive materials packages: Summary report of NRC approved packages

International Nuclear Information System (INIS)

1987-11-01

This directory contains a Summary Report of the US Nuclear Regulatory Commission's Approved Packages (Volume 1). This directory makes available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volume 1

Interim storage of radioactive waste packages

International Nuclear Information System (INIS)

1998-01-01

This report covers all the principal aspects of production and interim storage of radioactive waste packages. The latest design solutions of waste storage facilities and the operational experiences of developed countries are described and evaluated in order to assist developing Member States in decision making and design and construction of their own storage facilities. This report is applicable to any category of radioactive waste package prepared for interim storage, including conditioned spent fuel, high level waste and sealed radiation sources. This report addresses the following issues: safety principles and requirements for storage of waste packages; treatment and conditioning methods for the main categories of radioactive waste; examples of existing interim storage facilities for LILW, spent fuel and high level waste; operational experience of Member States in waste storage operations including control of storage conditions, surveillance of waste packages and observation of the behaviour of waste packages during storage; retrieval of waste packages from storage facilities; technical and administrative measures that will ensure optimal performance of waste packages subject to various periods of interim storage

Design aspects of plutonium air-transportable packages

International Nuclear Information System (INIS)

Allen, G.C.; Moya, J.L.; Pierce, J.D.; Attaway, S.W.

1989-01-01

Recent worldwide interest in transporting plutonium powders by air has created a need for expanding the packaging technology base as well as improving their understanding of how plutonium air transport (PAT) packagings perform during severe accident tests. Historically it has not been possible to establish design rules for individual package components because of the complex way parts interacted in forming a successful whole unit. Also, computer analyses were only considered valid for very limited portions of the design effort because of large deformations, localized tearing occurring in the package during accident testing, and extensive use of orthotropic materials. Consequently, iterative design and experimentation has historically been used to develop plutonium air-transportable packages. Full-scale prototypes have been tested since scaling of packages utilizing wood as an energy absorber and thermal insulator has not proven to be very successful. This is because the wood grain and dynamic performance of the wood during crush do not always scale. The high cost of full-scale testing of large packages has certainly hindered obtaining additional data and development new designs. The testing criteria for PAT packages, as described in the US Nuclear Regulatory Commission's Qualification Criteria to Certify a Package for Air Transport of Plutonium, NUREG-0360, 1978, are summarized. Computer modeling techniques have greatly improved over the last ten years, and there are some areas of opportunity for future applications to plutonium air-transportable package design problems. Having developed a better understanding of the performance of current packages, they have the opportunity to make major improvements in new packaging concepts. Each of these areas is explored in further depth to establish their impact on design practices for air-transportable packages

Best Practice in Policy Package Design

DEFF Research Database (Denmark)

Kessler, Florian; Vesela, Jirina; Vencl, Vaclav

2010-01-01

This deliverable focuses on the identification and analysis of best practice examples of policy package design. For this purpose a methodology is developed that allows the systematic analysis of both national and EU policy packages. Eight packages were selected and analysed, highlighting...... the factors which supported the design and implementation process in each case. The results of the analysis show which factors led to these cases to be considered best practice. In addition, factors are identified which are not yet part of the generic policy packaging framework presented in earlier OPTIC...... Deliverables. The consideration of these factors will help to further improve the framework in the subsequent work packages....

Intelligent food packaging - research and development

OpenAIRE

Renata Dobrucka; Ryszard Cierpiszewski; Andrzej Korzeniowski

2015-01-01

Packaging also fosters effective marketing of the food through distribution and sale channels. It is of the utmost importance to optimize the protection of the food, a great quality and appearance - better than typical packaged foods. In recent years, intelligent packaging became very popular. Intelligent packaging is becoming more and more widely used for food products. Application of this type of solution contributes to improvement of the quality consumer life undoubtedly. Intelligent packa...

Low level waste shipment accident lessons learned

International Nuclear Information System (INIS)

Rast, D.M.; Rowe, J.G.; Reichel, C.W.

1995-01-01

On October 1, 1994 a shipment of low-level waste from the Fernald Environmental Management Project, Fernald, Ohio, was involved in an accident near Rolla, Missouri. The accident did not result in the release of any radioactive material. The accident did generate important lessons learned primarily in the areas of driver and emergency response communications. The shipment was comprised of an International Standards Organization (ISO) container on a standard flatbed trailer. The accident caused the low-level waste package to separate from the trailer and come to rest on its top in the median. The impact of the container with the pavement and median inflicted relatively minor damage to the container. The damage was not substantial enough to cause failure of container integrity. The success of the package is attributable to the container design and the packaging procedures used at the Fernald Environmental Management Project for low-level waste shipments. Although the container survived the initial wreck, is was nearly breached when the first responders attempted to open the ISO container. Even though the container was clearly marked and the shipment documentation was technically correct, this information did not identify that the ISO container was the primary containment for the waste. The lessons learned from this accident have DOE complex wide applicability. This paper is intended to describe the accident, subsequent emergency response operations, and the lessons learned from this incident

Unit-of-Use Versus Traditional Bulk Packaging

Directory of Open Access Journals (Sweden)

Tiffany So

2012-01-01

Full Text Available Background: The choice between unit-of-use versus traditional bulk packaging in the US has long been a continuous debate for drug manufacturers and pharmacies in order to have the most efficient and safest practices. Understanding the benefits of using unit-of-use packaging over bulk packaging by US drug manufacturers in terms of workflow efficiency, economical costs and medication safety in the pharmacy is sometimes challenging.Methods: A time-saving study comparing the time saved using unit-of-use packaging versus bulk packaging, was examined. Prices between unit-of-use versus bulk packages were compared by using the Red Book: Pharmacy’s Fundamental Reference. Other articles were reviewed on the topics of counterfeiting, safe labeling, and implementation of unit-of-use packaging. Lastly, a cost-saving study was reviewed showing how medication adherence, due to improved packaging, could be cost-effective for patients.Results: When examining time, costs, medication adherence, and counterfeiting arguments, unit-of-use packaging proved to be beneficial for patients in all these terms.

Unit-of-Use Versus Traditional Bulk Packaging

Directory of Open Access Journals (Sweden)

Tiffany So

2012-01-01

Full Text Available Background: The choice between unit-of-use versus traditional bulk packaging in the US has long been a continuous debate for drug manufacturers and pharmacies in order to have the most efficient and safest practices. Understanding the benefits of using unit-of-use packaging over bulk packaging by US drug manufacturers in terms of workflow efficiency, economical costs and medication safety in the pharmacy is sometimes challenging. Methods: A time-saving study comparing the time saved using unit-of-use packaging versus bulk packaging, was examined. Prices between unit-of-use versus bulk packages were compared by using the Red Book: Pharmacy's Fundamental Reference. Other articles were reviewed on the topics of counterfeiting, safe labeling, and implementation of unit-of-use packaging. Lastly, a cost-saving study was reviewed showing how medication adherence, due to improved packaging, could be cost-effective for patients. Results: When examining time, costs, medication adherence, and counterfeiting arguments, unit-of-use packaging proved to be beneficial for patients in all these terms.   Type: Student Project

Fresh meat packaging: consumer acceptance of modified atmosphere packaging including carbon monoxide.

Science.gov (United States)

Grebitus, Carola; Jensen, Helen H; Roosen, Jutta; Sebranek, Joseph G

2013-01-01

Consumers' perceptions and evaluations of meat quality attributes such as color and shelf life influence purchasing decisions, and these product attributes can be affected by the type of fresh meat packaging system. Modified atmosphere packaging (MAP) extends the shelf life of fresh meat and, with the inclusion of carbon monoxide (CO-MAP), achieves significant color stabilization. The objective of this study was to assess whether consumers would accept specific packaging technologies and what value consumers place on ground beef packaged under various atmospheres when their choices involved the attributes of color and shelf life. The study used nonhypothetical consumer choice experiments to determine the premiums that consumers are willing to pay for extended shelf life resulting from MAP and for the "cherry red" color in meat resulting from CO-MAP. The experimental design allowed determination of whether consumers would discount foods with MAP or CO-MAP when (i) they are given more detailed information about the technologies and (ii) they have different levels of individual knowledge and media exposure. The empirical analysis was conducted using multinomial logit models. Results indicate that consumers prefer an extension of shelf life as long as the applied technology is known and understood. Consumers had clear preferences for brighter (aerobic and CO) red color and were willing to pay $0.16/lb ($0.35/kg) for each level of change to the preferred color. More information on MAP for extending the shelf life and on CO-MAP for stabilizing color decreased consumers' willingness to pay. An increase in personal knowledge and media exposure influenced acceptance of CO-MAP negatively. The results provide quantitative measures of how packaging affects consumers' acceptance and willingness to pay for products. Such information can benefit food producers and retailers who make decisions about investing in new packaging methods.

16 CFR 503.6 - Packagers' duty to withhold availability of packages imprinted with retail sale price...

Science.gov (United States)

2010-01-01

... THE FAIR PACKAGING AND LABELING ACT STATEMENTS OF GENERAL POLICY OR INTERPRETATION § 503.6 Packagers... reason to know that it will be used as an instrumentality for deception or for frustration of value... fully passes on to the purchasers the represented savings or sale price advantage. (b) A packager or...

Analysis of Type A packaging systems based on greater than 400 individual packaging tests

International Nuclear Information System (INIS)

Edling, D.A.

1976-01-01

Type A packagings commonly used within the U.S. were studied to determine their performance with respect to, ''Tests for demonstrating ability to withstand normal conditions of transport,'' (e.g., water spray, free drop (4 ft), penetration, corner drop, and compression). There are several differences in U.S. and IAEA Type A packaging requirements and these are outlined. For purposes of this study, U. S. requirements were used. More than 100 separate packagings (greater than 400 individual tests) were studied and evaluated. Most of these packagings can be divided into four basic groups: steel drums, wooden boxes, fiberboard containers, and steel boxes. The steel drums met all the requirements with a minimum of qualification and restrictions on use. The wooden boxes performed well, with three-way corner construction providing the best results. The Type A performance requirements had a much greater effect on fiberboard packagings (boxes and drums). In most cases penetration of the fiberboard container did occur, but this was dependent on the inner packagings and materials used. Steel boxes offer a wide flexibility in types of construction, materials usable, volumes, and authorized gross weights. Material usage and construction for wooden and fiberboard containers, such as use of plywood in box construction, banding of boxes, and use of ''firm'' cushioning materials within fiberboard containers, are also discussed

Type B Drum packages

International Nuclear Information System (INIS)

Edwards, W.S.

1995-11-01

The Type B Drum package is a container in which a single drum containing Type B quantities of radioactive material will be packaged for shipment. The Type B Drum containers are being developed to fill a void in the packaging and transportation capabilities of the US Department of Energy (DOE), as no double containment packaging for single drums of Type B radioactive material is currently available. Several multiple-drum containers and shielded casks presently exist. However, the size and weight of these containers present multiple operational challenges for single-drum shipments. The Type B Drum containers will offer one unshielded version and, if needed, two shielded versions, and will provide for the option of either single or double containment. The primary users of the Type B Drum container will be any organization with a need to ship single drums of Type B radioactive material. Those users include laboratories, waste retrieval facilities, emergency response teams, and small facilities

49 CFR 173.23 - Previously authorized packaging.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Previously authorized packaging. 173.23 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.23 Previously authorized packaging. (a) When the regulations specify a packaging with a specification marking...

Watermarking spot colors in packaging

Science.gov (United States)

Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

2015-03-01

In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

Hanford Site radioactive hazardous materials packaging directory

International Nuclear Information System (INIS)

McCarthy, T.L.

1995-12-01

The Hanford Site Radioactive Hazardous Materials Packaging Directory (RHMPD) provides information concerning packagings owned or routinely leased by Westinghouse Hanford Company (WHC) for offsite shipments or onsite transfers of hazardous materials. Specific information is provided for selected packagings including the following: general description; approval documents/specifications (Certificates of Compliance and Safety Analysis Reports for Packaging); technical information (drawing numbers and dimensions); approved contents; areas of operation; and general information. Packaging Operations ampersand Development (PO ampersand D) maintains the RHMPD and may be contacted for additional information or assistance in obtaining referenced documentation or assistance concerning packaging selection, availability, and usage

Hanford Site radioactive hazardous materials packaging directory

Energy Technology Data Exchange (ETDEWEB)

McCarthy, T.L.

1995-12-01

The Hanford Site Radioactive Hazardous Materials Packaging Directory (RHMPD) provides information concerning packagings owned or routinely leased by Westinghouse Hanford Company (WHC) for offsite shipments or onsite transfers of hazardous materials. Specific information is provided for selected packagings including the following: general description; approval documents/specifications (Certificates of Compliance and Safety Analysis Reports for Packaging); technical information (drawing numbers and dimensions); approved contents; areas of operation; and general information. Packaging Operations & Development (PO&D) maintains the RHMPD and may be contacted for additional information or assistance in obtaining referenced documentation or assistance concerning packaging selection, availability, and usage.

Political Analysis through the Prince System. Learning Packages in the Policy Sciences, PS-23.

Science.gov (United States)

Coplin, William D.; O'Leary, Michael K.

This package introduces college students to the elements of the Prince System, a widely used system for making political forecasts and developing political strategies. Designed to be completed in two to three weeks, the two exercises enable students to (1) identify political issues that the Prince System can help them understand, (2) determine the…

High-Temperature, Wirebondless, Ultracompact Wide Bandgap Power Semiconductor Modules

Science.gov (United States)

Elmes, John

2015-01-01

Silicon carbide (SiC) and other wide bandgap semiconductors offer great promise of high power rating, high operating temperature, simple thermal management, and ultrahigh power density for both space and commercial power electronic systems. However, this great potential is seriously limited by the lack of reliable high-temperature device packaging technology. This Phase II project developed an ultracompact hybrid power module packaging technology based on the use of double lead frames and direct lead frame-to-chip transient liquid phase (TLP) bonding that allows device operation up to 450 degC. The new power module will have a very small form factor with 3-5X reduction in size and weight from the prior art, and it will be capable of operating from 450 degC to -125 degC. This technology will have a profound impact on power electronics and energy conversion technologies and help to conserve energy and the environment as well as reduce the nation's dependence on fossil fuels.

Packaging and Embedded Electronics for the Next Generation

Science.gov (United States)

Sampson, Michael J.

2010-01-01

This viewgraph presentation describes examples of electronic packaging that protects an electronic element from handling, contamination, shock, vibration and light penetration. The use of Hermetic and non-hermetic packaging is also discussed. The topics include: 1) What is Electronic Packaging? 2) Why Package Electronic Parts? 3) Evolution of Packaging; 4) General Packaging Discussion; 5) Advanced non-hermetic packages; 6) Discussion of Hermeticity; 7) The Class Y Concept and Possible Extensions; 8) Embedded Technologies; and 9) NEPP Activities.

Grandfathering of competent authority approved packages

International Nuclear Information System (INIS)

Osgood, N.L.

2004-01-01

International Atomic Energy Agency transportation regulations are reviewed and revised on a periodic basis as new technical and scientific information becomes available. The 1996 Edition of the Regulations for the Safe Transport of Radioactive Materials in TS-R-1 includes provisions for the use of package designs approved to previous editions of the regulations. This assures that there is no disruption of transport when the regulations are updated and revised. The revision of package design standards may make certain designs obsolete, though not necessarily unsafe. The U.S. Nuclear Regulatory Commission is the agency in the United States that certifies transportation packages for Type B and fissile materials. NRC regulations include grandfathering provisions that are comparable to and compatible with the IAEA standards. NRC staff is promoting a new system that would eliminate the need to grandfather package designs. Under the new method, any new or revised provision of the regulations that affects package standards would include its own transitional arrangements. In this way, each change would be evaluated for its safety importance. Changes in the package standards that are important to safety would be implemented immediately upon the regulations coming into force. Other changes, that do not significantly affect safety, would have longer implementation periods. In this way, all packages in use would be compatible with the regulations in force, and no specific grandfathering provisions for older designs would be needed. NRC staff has concluded that the package design standards are mature and have been shown to be protective over the past 40 years of shipping experience. We predict that future changes in package design standards will not be substantive in terms of resulting in significant changes in physical performance of a package in transport, including actual transportation accidents. The benefits of the new system would be a more predictable regulatory structure

Package testing capabilities at the Pacific Northwest Laboratory

International Nuclear Information System (INIS)

Taylor, J.M.

1993-01-01

The purpose of this paper is to describe the package testing capabilities at the Pacific Northwest Laboratory (PNL). In the past all of the package testing that was performed at PNL was done on prototype or mocked up radioactive material packaging. Presently, we are developing the capability to perform testing on non-radioactive material packaging. The testing on the non-radioactive material packaging will be done to satisfy the new performance oriented packaging requirements (DOT Docket HM-181, 1991). This paper describes the equipment used to perform the performance oriented packaging tests and also describes some testing capability for testing radioactive material packaging

RECENT TRENDS IN PACKAGING SYSTEMS FOR PHARMACEUTICAL PRODUCTS

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2014-12-01

Full Text Available Background:  In recent years, pharmaceutical packaging market was one of the fastest growing areas of the packaging industry. At the same time the packaging manufacturers put high demands on quality and safety. Methods: Review of innovations in packaging systems for pharmaceutical products was made including newest information of researches and achievements of recent years. Results and conclusion: Observed in recent years the development of pharmaceutical packaging market expanded due to with the huge technological advances that allow introduction of new packaging. Also, in this study presented intelligent packaging in pharmacy and innovation in child-resistance packaging.

K Basin sludge packaging design criteria (PDC) and safety analysis report for packaging (SARP) approval plan

International Nuclear Information System (INIS)

Brisbin, S.A.

1996-01-01

This document delineates the plan for preparation, review, and approval of the Packaging Design Crieteria for the K Basin Sludge Transportation System and the Associated on-site Safety Analysis Report for Packaging. The transportation system addressed in the subject documents will be used to transport sludge from the K Basins using bulk packaging

The impact of packaging on product competition

Directory of Open Access Journals (Sweden)

Maryam Masoumi

2012-09-01

Full Text Available The primary objective of this paper is to detect important factors, which are influencing competitive advantage. The proposed model of this paper uses sampling technique to measure characteristics of society. There are eight independent variables for the proposed study of this paper including packaging endurance, easy distribution, customer promotion through packaging, packaging structure, packaging as silent advertiser, diversity of packaging, clean and healthy packaging and innovation in packaging. The proposed study uses structural equation modeling to either accept or reject all hypotheses associated with the proposed study of this paper. The population of this study includes all managers and experts who are involved in packaging products. We used simple sampling technique and chooses 300 from a population of 450 people who are considered as the population of this survey. Cronbach alpha was determined as 0.732, which is above the minimum acceptable level. The results confirm that all mentioned factors influence competitiveness, effectively.

Migration and sorption phenomena in packaged foods.

Science.gov (United States)

Gnanasekharan, V; Floros, J D

1997-10-01

Rapidly developing analytical capabilities and continuously evolving stringent regulations have made food/package interactions a subject of intense research. This article focuses on: (1) the migration of package components such as oligomers and monomers, processing aids, additives, and residual reactants in to packaged foods, and (2) sorption of food components such as flavors, lipids, and moisture into packages. Principles of diffusion and thermodynamics are utilized to describe the mathematics of migration and sorption. Mathematical models are developed from first principles, and their applicability is illustrated using numerical simulations and published data. Simulations indicate that available models are system (polymer-penetrant) specific. Furthermore, some models best describe the early stages of migration/sorption, whereas others should be used for the late stages of these phenomena. Migration- and/or sorption-related problems with respect to glass, metal, paper-based and polymeric packaging materials are discussed, and their importance is illustrated using published examples. The effects of migrating and absorbed components on food safety, quality, and the environment are presented for various foods and packaging materials. The impact of currently popular packaging techniques such as microwavable, ovenable, and retortable packaging on migration and sorption are discussed with examples. Analytical techniques for investigating migration and sorption phenomena in food packaging are critically reviewed, with special emphasis on the use and characteristics of food-simulating liquids (FSLs). Finally, domestic and international regulations concerning migration in packaged foods, and their impact on food packaging is briefly presented.

Young people's perceptions of cigarette packaging and plain packaging: an online survey.

Science.gov (United States)

Moodie, Crawford; Ford, Allison; Mackintosh, Anne Marie; Hastings, Gerard

2012-01-01

In the United Kingdom, with most marketing channels prohibited, packaging is one of the few remaining ways that tobacco companies can promote their products. An online survey with young people aged 10-17 years (N = 658) was used to explore why youth choose cigarettes, perceptions of pack color, and perceptions of plain (nonbranded) cigarette packaging. Young people were also shown an image of 3 plain packs, which differed by shape and method of opening, and asked which they liked most and thought others their age would smoke. Price and what significant others smoke were key factors for choosing cigarettes, with packaging also an important influence. More than a third of the sample associated lighter pack color with weak tasting and less harmful cigarettes. Plain packs were rated negatively as were perceptions of plain pack users. One in 3 showed a preference for either a narrow "perfume type" plain pack or a plain "slide" pack that opened from the side, and 1 in 3 also thought that young people would smoke these packs. Packaging appears to both attract young people and mislead them about product strength and relative harm. Innovative pack construction (novel pack shape and method of opening) and the use of color are instrumental in these effects. The findings therefore suggest that any move to plain packaging should not only consider the benefits of removing branding (including color) but also of standardizing pack construction in terms of shape and method of opening.

Wittgenstein y la teoría contemplativa del significado Observaciones a la tesis de Juan Abugattás

Directory of Open Access Journals (Sweden)

Álvaro Revolledo Novoa

2011-05-01

Full Text Available Este ensayo consiste en una lectura crítica de la interpretación que realiza el filósofo peruano Juan Abugattás en torno a la “teoría contemplativa” del Tractatus Logico Philosophicus (TLP de Ludwig Wittgenstein. En particular, se encarga de revisar la tesis de Bachiller de Juan Abugattás en la que afirma que la teoría del significado del TLP es reemplazada por la teoría del uso en la obra posterior de Wittgenstein. El objetivo central de este ensayo es demostrar que la teoría del significado del TLP no es, como pretende Abugattás, una mera teoría contemplativa, y que la teoría del significado de las Philosophische Bemerkungen (Ph. B., a diferencia de lo que sostiene Abugattás, aun mantiene intacta la perspectiva del TLP respecto de cómo el lenguaje puede permitirnos conocer el mundo. En ambos casos, sostengo que la teoría del significado del TLP obedece a una respuesta a la crítica lingüística de Mauthner y sus consecuencias en el plano del conocimiento.Palabras claves: Wittgenstein, teoría del significado, Tractatus Logico Philosophicus, lenguaje, conocimiento.

Undergraduate teaching in geriatric medicine using computer-aided learning improves student performance in examinations.

Science.gov (United States)

Daunt, Laura A; Umeonusulu, Patience I; Gladman, John R F; Blundell, Adrian G; Conroy, Simon P; Gordon, Adam L

2013-07-01

computer-aided learning (CAL) is increasingly used to deliver teaching, but few studies have evaluated its impact on learning within geriatric medicine. We developed and implemented CAL packages on falls and continence, and evaluated their effect on student performance in two medical schools. traditional ward based and didactic teaching was replaced by blended learning (CAL package combined with traditional teaching methods). Examination scores were compared for cohorts of medical students receiving traditional learning and those receiving blended learning. Control questions were included to provide data on cohort differences. in both medical schools, there was a trend towards improved scores following blended learning, with a smaller number of students achieving low scores (P learning was associated with improvement in student examination performance, regardless of the setting or the methods adopted, and without increasing teaching time. Our findings support the use of CAL in teaching geriatric medicine, and this method has been adopted for teaching other topics in the undergraduate curriculum.

Safety Analysis Report for Packaging (SARP): ATMX-500 Railcar nuclear packaging

International Nuclear Information System (INIS)

Griffin, J.F.; Peterson, J.B.; Edling, D.A.; Blauvelt, R.K.

1977-01-01

A Safety Analysis Report for Packaging (SARP) is described that makes available to all potential users the technical specifications and limits pertinent to the modification and use of the ATMX Railcars for which the Department of Transportation has issued Special Permit No. 5948. The SARP includes discussions of structural integrity, thermal resistance, radiation shielding and radiological safety, nuclear criticality safety, and quality control. Much of the information was previously published in a similar report. A complte physical and technical description of the package is presented. The packaging cnsists of a specially modified ATMX Series 500 Railcar loaded with DOT Specification steel drums or fiberglass coated plywood boxes. The results of the nuclear criticality safety analysis provide the maximum quantities of each fissile isotope which may be shipped as Fissile Class I in 30- and 55-gal drums. A limit of 5 g/ft 3 was established for wooden boxes. Design and development considerations regarding the packaging concept and modification of the ATMX-500 Railcar are presented. Tables, dimensional sketches, sequential photographs of the structural modifications, technical references, loading and shipping guidelines, and results of Mound Laboratory's experience in using this container are included. An internal review of this SARP was performed in compliance with the requirements of ERDA Manual Chapter 5201-Part V

7 CFR 58.151 - Packaging and repackaging.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging and repackaging. 58.151 Section 58.151... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Packaging and General Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all...

Dual Use Packaging, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA seeks down-weighted packaging compatible with microwave preparation and perhaps high hydrostatic pressure processing. New packaging must satisfy NASA's 3-year...

Safety analysis report: packages. DOT specification 7A - Type A container Mark 15 sludge shipping package

International Nuclear Information System (INIS)

Zeh, C.W.

1985-03-01

Sludge or filter cake containing 1.1 wt % 235 U enriched uranium from Mark 15 fabrication will be packaged in 55-gallon containers and shipped from SRP to NLO, Fernald, Ohio for recovery of product. About 7 Metric Tons (MT) of filter cake will be produced from fabricating Mark 15 slugs each reactor charge. Packaged shipments of this material, consigned as exclusive use, will be shipped to NLO in Department of Transportation (DOT) Specification 7A - Type A packages under a DOE Certificate of Compliance for Fissile Class III shipments. ''Type A packaging'' is designed to retain containment and shielding integrity under normal conditions of transport. This report documents compliance of the package design, construction methods, material and test performance with DOT Specification 7A. This DOT 7A Type A package contains a carbon steel outer container which is a 0.060-in.-thick 55-gal, galvanized drum equipped with a gasketed closure. The outer container encloses a 0.090-in.-thick, open head, polyethylene liner with lid

K east encapsulation packager modifications

International Nuclear Information System (INIS)

Jensen, M.A.

1994-01-01

This Supporting Document analyzes a proposal for reducing the under-packager volume to decrease the amount of fissile material that could accumulate there. The analysis shows that restricting the under packager volume to no more than 4080 in 3 will assure that if accumulated fissile material beneath the packager is added to the worst-case mass of fissile material in the discharge chute, a k eff of 0.98 will not be exceeded

System issues for multichip packaging

Science.gov (United States)

Sage, Maurice G.; Hartley, Neil

1991-04-01

It is now generally recognised that the performance of an electronic system is governed by the choice of packaging technology. Never before have the technical and financial implications of a packaging technology choice been more critical and never before has technology interdependence or industry globalisation made the choice more difficult. This paper is aimed at examining the choices available and the system issues resulting from the move from single chip to multichip packaging.

APPLICATION OF NANOTECHNOLOGY IN FOOD PACKAGING

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2014-04-01

Full Text Available Nanotechnology involves the design, production and use of structures through control of the size and shape of the materials at the nanometre scale. Also, nanomaterials have been already applied in many fields of human life. Nanocomposites have already led to several innovations with potential applications in the food packaging sector. The use of nanocomposite formulations is expected to considerably enhance the shelf-life of many types of food. This improvement can lead to lower weight packages because less material is needed to obtain the same or even better barrier properties. This, in turn, can lead to reduced package cost with less packaging waste. Antimicrobial packaging is another area with high potential for applying nanocomposite technology. Nanostructured antimicrobials have a higher surface area-to-volume ratio when compared with their higher scale counterparts. Therefore, antimicrobial nanocomposite packaging systems are supposed to be particularly efficient in their activities against microbial cells. In this review, definition of nanomaterials is presented. Besides, the paper shows examples of nanocomposities and antimicrobial nanopackaging mainly with the use of nanosilver. Moreover, nanoparticles such ZnO, TiO2, MgO and nanosensors in packaging were presented.

Function Package for Computing Quantum Resource Measures

Science.gov (United States)

Huang, Zhiming

2018-05-01

In this paper, we present a function package for to calculate quantum resource measures and dynamics of open systems. Our package includes common operators and operator lists, frequently-used functions for computing quantum entanglement, quantum correlation, quantum coherence, quantum Fisher information and dynamics in noisy environments. We briefly explain the functions of the package and illustrate how to use the package with several typical examples. We expect that this package is a useful tool for future research and education.

Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

International Nuclear Information System (INIS)

1998-03-01

The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes

Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes.

7 CFR 33.6 - Package.

Science.gov (United States)

2010-01-01

... the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... ISSUED UNDER AUTHORITY OF THE EXPORT APPLE ACT Definitions § 33.6 Package. Package means any container of apples. ...

Effective e-learning for health professionals and students--barriers and their solutions. A systematic review of the literature--findings from the HeXL project.

Science.gov (United States)

Childs, Sue; Blenkinsopp, Elizabeth; Hall, Amanda; Walton, Graham

2005-12-01

In 2003/4 the Information Management Research Institute, Northumbria University, conducted a research project to identify the barriers to e-learning for health professionals and students. The project also established possible ways to overcome these barriers. The North of England Workforce Development Confederation funded the project. The project comprised a systematic review of the literature on barriers to and solutions/critical success factors for e-learning in the health field. Fifty-seven references were suitable for analysis. This review was supplemented by a questionnaire survey of learners and an interview study of learning providers to ensure that data identified from the literature were grounded in reality. The main barriers are: requirement for change; costs; poorly designed packages; inadequate technology; lack of skills; need for a component of face-to-face teaching; time intensive nature of e-learning; computer anxiety. A range of solutions can solve these barriers. The main solutions are: standardization; strategies; funding; integration of e-learning into the curriculum; blended teaching; user friendly packages; access to technology; skills training; support; employers paying e-learning costs; dedicated work time for e-learning. The authors argue that librarians can play an important role in e-learning: providing support and support materials; teaching information skills; managing and providing access to online information resources; producing their own e-learning packages; assisting in the development of other packages.

7 CFR 58.444 - Packaging and repackaging.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Packaging and repackaging. 58.444 Section 58.444... Procedures § 58.444 Packaging and repackaging. (a) Packaging rindless cheese or cutting and repackaging all styles of bulk cheese shall be conducted under rigid sanitary conditions. The atmosphere of the packaging...

7 CFR 58.340 - Printing and packaging.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Printing and packaging. 58.340 Section 58.340... Procedures § 58.340 Printing and packaging. Printing and packaging of consumer size containers of butter... packaging equipment should be provided. The outside cartons should be removed from bulk butter in a room...

Waste Package Component Design Methodology Report

International Nuclear Information System (INIS)

D.C. Mecham

2004-01-01

This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety and operational

Waste Package Component Design Methodology Report

Energy Technology Data Exchange (ETDEWEB)

D.C. Mecham

2004-07-12

This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety

The Integration of an API619 Screw Compressor Package into the Industrial Internet of Things

Science.gov (United States)

Milligan, W. J.; Poli, G.; Harrison, D. K.

2017-08-01

The Industrial Internet of Things (IIoT) is the industrial subset of the Internet of Things (IoT). IIoT incorporates big data technology, harnessing the instrumentation data, machine to machine communication and automation technologies that have existed in industrial settings for years. As industry in general trends towards the IIoT and as the screw compressor packages developed by Howden Compressors are designed with a minimum design life of 25 years, it is imperative this technology is embedded immediately. This paper provides the reader with a description on the Industrial Internet of Things before moving onto describing the scope of the problem for an organisation like Howden Compressors who deploy multiple compressor technologies across multiple locations and focuses on the critical measurements particular to high specification screw compressor packages. A brief analysis of how this differs from high volume package manufacturers deploying similar systems is offered. Then follows a description on how the measured information gets from the tip of the instrument in the process pipework or drive train through the different layers, with a description of each layer, into the final presentation layer. The functions available within the presentation layer are taken in turn and the benefits analysed with specific focus on efficiency and availability. The paper concludes with how packagers adopting the IIoT can not only optimise their package but by utilising the machine learning technology and pattern detection applications can adopt completely new business models.

Directory of certificates of compliance for radioactive materials packages. Volume 1. Summary report of NRC approved packages

International Nuclear Information System (INIS)

1977-12-01

Purpose of this directory is to make available a convenient source of information on packagings which have been approved by the U.S. Nuclear Regulatory Commission. This volume contains a summary report of NRC-approved packages for radioactive material packages effective Nov. 30, 1977

Advanced organics for electronic substrates and packages

CERN Document Server

Fletcher, Andrew E

1992-01-01

Advanced Organics for Electronic Substrates and Packages provides information on packaging, which is one of the most technologically intensive activities in the electronics industry. The electronics packaging community has realized that while semiconductor devices continue to be improved upon for performance, cost, and reliability, it is the interconnection or packaging of these devices that will limit the performance of the systems. Technology must develop packaging for transistor chips, with high levels of performance and integration providing cooling, power, and interconnection, and yet pre

9 CFR 381.144 - Packaging materials.

Science.gov (United States)

2010-01-01

... to health. All packaging materials must be safe for the intended use within the meaning of section..., from the packaging supplier under whose brand name and firm name the material is marketed to the... distinguishing brand name or code designation appearing on the packaging material shipping container; must...

Aerodynamic coefficient identification package dynamic data accuracy determinations: Lessons learned

Science.gov (United States)

Heck, M. L.; Findlay, J. T.; Compton, H. R.

1983-01-01

The errors in the dynamic data output from the Aerodynamic Coefficient Identification Packages (ACIP) flown on Shuttle flights 1, 3, 4, and 5 were determined using the output from the Inertial Measurement Units (IMU). A weighted least-squares batch algorithm was empolyed. Using an averaging technique, signal detection was enhanced; this allowed improved calibration solutions. Global errors as large as 0.04 deg/sec for the ACIP gyros, 30 mg for linear accelerometers, and 0.5 deg/sec squared in the angular accelerometer channels were detected and removed with a combination is bias, scale factor, misalignment, and g-sensitive calibration constants. No attempt was made to minimize local ACIP dynamic data deviations representing sensed high-frequency vibration or instrument noise. Resulting 1sigma calibrated ACIP global accuracies were within 0.003 eg/sec, 1.0 mg, and 0.05 deg/sec squared for the gyros, linear accelerometers, and angular accelerometers, respectively.

Investigating the effect of aesthetic aspect of packaging and its dimensions on purchase intention through packaging preference

OpenAIRE

Abolghasem Ebrahimi; Sayed Moslem Alavi; Mehdi Najafi Seyahroodi

2015-01-01

Companies in the era of quality convergence of products are bound to differentiation. As a differentiating tool, Packaging can be a troubleshooter in this field. One of the ways of differentiation is to consider aesthetic aspect of packaging. According to this fact, current survey has studied the impact of aesthetic aspect of packaging on purchase intention of goods through packaging preference. A sample consisted of 384 customers of the big food stores in Shiraz is selected. To test the vali...

Waste package performance allocation system study report

International Nuclear Information System (INIS)

Memory, R.D.

1994-01-01

The Waste Package Performance Allocation system study was performed in order to provide a technical basis for the selection of the waste package period of substantially complete containment and its resultant contribution to the overall total system performance. This study began with a reference case based on the current Mined Geologic Disposal System (MGDS) baseline design and added a number of alternative designs. The waste package designs were selected from the designs being considered in detail during Advanced Conceptual Design (ACD). The waste packages considered were multi-barrier packages with a 0.95 cm Alloy 825 inner barrier and a 10, 20, or 45 cm thick carbon steel outer barrier. The waste package capacities varied from 6 to 12 to 21 Pressurized Water Reactor (PWR) fuel assemblies. The vertical borehole and in-drift emplacement modes were also considered, as were thermal loadings of 25, 57, and 114 kW/acre. The repository cost analysis indicated that the 21 PWR in-drift emplacement mode option with the 10 cm and 20 cm outer barrier thicknesses are the least expensive and that the 12 PWR in-drift case has approximately the same cost as the 6 PWR vertical borehole. It was also found that the cost increase from the 10 cm outer barrier waste package to the 20 cm waste package was less per centimeter than the increase from the 20 cm outer barrier waste package to the 45 cm outer barrier waste package. However, the repository cost was nearly linear with the outer barrier thickness for the 21 PWR in-drift case. Finally, corrosion rate estimates are provided and the relationship of repository cost versus waste package lifetime is discussed as is cumulative radionuclide release from the waste package and to the accessible environment for time periods of 10,000 years and 100,000 years

Reference waste package environment report

International Nuclear Information System (INIS)

Glassley, W.E.

1986-01-01

One of three candidate repository sites for high-level radioactive waste packages is located at Yucca Mountain, Nevada, in rhyolitic tuff 700 to 1400 ft above the static water table. Calculations indicate that the package environment will experience a maximum temperature of ∼230 0 C at 9 years after emplacement. For the next 300 years the rock within 1 m of the waste packages will remain dehydrated. Preliminary results suggest that the waste package radiation field will have very little effect on the mechanical properties of the rock. Radiolysis products will have a negligible effect on the rock even after rehydration. Unfractured specimens of repository rock show no change in hydrologic characteristics during repeated dehydration-rehydration cycles. Fractured samples with initially high permeabilities show a striking permeability decrease during dehydration-rehydration cycling, which may be due to fracture healing via deposition of silica. Rock-water interaction studies demonstrate low and benign levels of anions and most cations. The development of sorptive secondary phases such as zeolites and clays suggests that anticipated rock-water interaction may produce beneficial changes in the package environment

19 CFR 134.53 - Examination packages.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Examination packages. 134.53 Section 134.53... TREASURY COUNTRY OF ORIGIN MARKING Articles Found Not Legally Marked § 134.53 Examination packages. (a) Site of marking—(1) Customs custody. Articles (or containers) in examination packages may be marked by...

Type A radioactive liquid sample packaging family

International Nuclear Information System (INIS)

Edwards, W.S.

1995-11-01

Westinghouse Hanford Company (WHC) has developed two packagings that can be used to ship Type A quantities of radioactive liquids. WHC designed these packagings to take advantage of commercially available items where feasible to reduce the overall packaging cost. The Hedgehog packaging can ship up to one liter of Type A radioactive liquid with no shielding and 15 cm of distance between the liquid and the package exterior, or 30 ml of liquid with 3.8 cm of stainless steel shielding and 19 cm of distance between the liquid and the package exterior. The One Liter Shipper can ship up to one liter of Type A radioactive liquid that does not require shielding

HTML5 eLearning kit for dummies

CERN Document Server

Boumphrey, Frank

2012-01-01

Helping self-directed learners of all levels learn HTML5 If you want to develop and structure pages for the web, HTML5 is one of the tools you need. This invaluable eLearning kit steps you through learning HTML5, CSS3, and JavaScript. With this dynamic combination of a full-color printed book and a Dummies interactive eLearning course on CD, you'll find a wealth of information on HTML5. Featuring both written and animated step-by-step how-tos, practice labs, helpful videos, numerous examples, and a host of Dummies hints and tips, this package makes your learning process easier. Follow the mate

The BINSYN Program Package

Directory of Open Access Journals (Sweden)

Albert P. Linnell

2012-06-01

Full Text Available The BINSYN program package, recently expanded to calculate synthetic spectra of cataclysmic variables, is being further extended to include synthetic photometry of ordinary binary stars in addition to binary stars with optically thick accretion disks. The package includes a capability for differentials correction optimization of eclipsing binary systems using synthetic photometry.

Safety Evaluation for Packaging 101-SY Hydrogen Mitigation Mixer Pump package

International Nuclear Information System (INIS)

Carlstrom, R.F.

1994-01-01

This Safety Evaluation for Packaging (SEP) provides analysis and considered necessary to approve a one-time transfer of the 101-SY Hydrogen Mitigation Mixer Pump (HMMP). This SEP will demonstrate that the transfer of the HMMP in a new shipping container will provide an equivalent degree of safety as would be provided by packages meeting US Department of Transportation (DOT)/US Nuclear Regulatory Commission (NRC) requirements. This fulfills onsite, transportation requirements implemented by WHC-CM-2-14

Safety Evaluation for Packaging 101-SY Hydrogen Mitigation Mixer Pump package

Energy Technology Data Exchange (ETDEWEB)

Carlstrom, R.F.

1994-10-05

This Safety Evaluation for Packaging (SEP) provides analysis and considered necessary to approve a one-time transfer of the 101-SY Hydrogen Mitigation Mixer Pump (HMMP). This SEP will demonstrate that the transfer of the HMMP in a new shipping container will provide an equivalent degree of safety as would be provided by packages meeting US Department of Transportation (DOT)/US Nuclear Regulatory Commission (NRC) requirements. This fulfills onsite, transportation requirements implemented by WHC-CM-2-14.

Safety analysis of spent fuel packaging

International Nuclear Information System (INIS)

Akamatsu, Hiroshi; Taniuchi, Hiroaki; Tai, Hideto

1987-01-01

Many types of spent fuel packagings have been manufactured and been used for transport of spent fuels discharged from nuclear power plant. These spent fuel packagings need to be assesed thoroughly about safety transportation because spent fuels loaded into the packaging have high radioactivity and generation of heat. This paper explains the outline of safety analysis of a packaging, Safety analysis is performed for structural, thermal, containment, shielding and criticality factors, and MARC-CDC, TRUMP, ORIGEN, QAD, ANISN, KENO, etc computer codes are used for such analysis. (author)

Signalling product healthiness through symbolic package cues: Effects of package shape and goal congruence on consumer behaviour.

NARCIS (Netherlands)

van Ooijen, Iris; Fransen, Marieke L; Verlegh, Peeter W J; Smit, Edith G

2016-01-01

Three studies show that product packaging shape serves as a cue that communicates healthiness of food products. Inspired by embodiment accounts, we show that packaging that simulates a slim body shape acts as a symbolic cue for product healthiness (e.g., low in calories), as opposed to packaging

Packaging LLW and ILW

International Nuclear Information System (INIS)

Flowers, R.H.; Owen, R.G.

1991-01-01

Low level waste (LLW) accounts for 70-80% by volume of all radioactive wastes produced by the nuclear industry. It has low specific activity, negligible actinide content and requires little, if any, shielding to protect workers. Volume reduction for LLW of high volume but low density may be achieved by incineration and compaction as appropriate, before packaging for disposal by near surface burial. Intermediate level waste (ILW) is treated and packed to convert it into a stable form to minimize any release of activity and make handling easier. The matrix chosen for immobilization, usually cement, polymers or bitumen, depends on the nature of the waste and the acceptance criteria of the disposal facility. The special case of LLW and ILW which will arise from reactor decommissioning is discussed. Packaging methods adopted by individual countries are reviewed. The range of costs involved for packaging ILW is indicated. There is no international consensus on the performance required from packaged waste to ensure its suitability both for interim storage and final disposal. (UK)

7 CFR 905.140 - Gift packages.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Gift packages. 905.140 Section 905.140 Agriculture... TANGELOS GROWN IN FLORIDA Rules and Regulations Non-Regulated Fruit § 905.140 Gift packages. Any handler..., ship any varieties for the following purpose and types of shipment: (a) To any person gift packages...

Waste package reliability analysis

International Nuclear Information System (INIS)

Pescatore, C.; Sastre, C.

1983-01-01

Proof of future performance of a complex system such as a high-level nuclear waste package over a period of hundreds to thousands of years cannot be had in the ordinary sense of the word. The general method of probabilistic reliability analysis could provide an acceptable framework to identify, organize, and convey the information necessary to satisfy the criterion of reasonable assurance of waste package performance according to the regulatory requirements set forth in 10 CFR 60. General principles which may be used to evaluate the qualitative and quantitative reliability of a waste package design are indicated and illustrated with a sample calculation of a repository concept in basalt. 8 references, 1 table

Emotional response towards food packaging

DEFF Research Database (Denmark)

Liao, Lewis Xinwei; Corsi, Armando M.; Chrysochou, Polymeros

2015-01-01

In this paper we investigate consumers’ emotional responses to food packaging. More specifically, we use self-report and physiological measures to jointly assess emotional responses to three typical food packaging elements: colours (lowwavelength vs. high-wavelength), images (positive vs. negative...... response that can only be measured by self-report measures. We propose that a joint application of selfreport and physiological measures can lead to richer information and wider interpretation of consumer emotional responses to food packaging elements than using either measure alone....

Learning outcomes afforded by self-assessed, segmented video–print combinations

OpenAIRE

Jack Koumi

2015-01-01

Learning affordances of video and print are examined in order to assess the learning outcomes afforded by hybrid video–print learning packages. The affordances discussed for print are: navigability, surveyability and legibility. Those discussed for video are: design for constructive reflection, provision of realistic experiences, presentational attributes, motivational influences and teacher personalisation. The video affordances are examined through a framework of pedagogic design principles...

Nanotechnology: An Untapped Resource for Food Packaging.

Science.gov (United States)

Sharma, Chetan; Dhiman, Romika; Rokana, Namita; Panwar, Harsh

2017-01-01

Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.

The environmental effects of taxes on packages

International Nuclear Information System (INIS)

Schroten, A.; Nelissen, D.; Bergsma, G.C.; Blom, M.J.

2010-08-01

The results of an evaluation of the environmental impacts of taxes for packages are presented, differentiated for greenhouse gas emissions. The evaluation used a qualitative analysis of information from eighteen depth-interviews with experts in the packaging market, foreign experiences, relevant price elasticities and 'expert guesses'. It appears that tax package so far had a limited effect on the packaging market. For the longer term (ten years) larger, but probably also limited, effects are expected. The environmental impact of packaging tax can be increased if the taxes are substantially increased. [nl

Waste package characterisation

Energy Technology Data Exchange (ETDEWEB)

Sannen, L.; Bruggeman, M.; Wannijn, J.P

1998-09-01

Radioactive wastes originating from the hot labs of the Belgian Nuclear Research Centre SCK-CEN contain a wide variety of radiotoxic substances. The accurate characterisation of the short- and long-term radiotoxic components is extremely difficult but required in view of geological disposal. This paper describes the methodology which was developed and adopted to characterise the high- and medium-level waste packages at the SCK-CEN hot laboratories. The proposed method is based on the estimation of the fuel inventory evacuated in a particular waste package; a calculation of the relative fission product contribution on the fuel fabrication and irradiation footing; a comparison of the calculated, as expected, dose rate and the real measured dose rate of the waste package. To cope with the daily practice an appropriate fuel inventory estimation route, a user friendly computer programme for fission product and corresponding dose rate calculation, and a simple dose rate measurement method have been developed and implemented.

Waste package characterisation

International Nuclear Information System (INIS)

Sannen, L.; Bruggeman, M.; Wannijn, J.P.

1998-09-01

Radioactive wastes originating from the hot labs of the Belgian Nuclear Research Centre SCK-CEN contain a wide variety of radiotoxic substances. The accurate characterisation of the short- and long-term radiotoxic components is extremely difficult but required in view of geological disposal. This paper describes the methodology which was developed and adopted to characterise the high- and medium-level waste packages at the SCK-CEN hot laboratories. The proposed method is based on the estimation of the fuel inventory evacuated in a particular waste package; a calculation of the relative fission product contribution on the fuel fabrication and irradiation footing; a comparison of the calculated, as expected, dose rate and the real measured dose rate of the waste package. To cope with the daily practice an appropriate fuel inventory estimation route, a user friendly computer programme for fission product and corresponding dose rate calculation, and a simple dose rate measurement method have been developed and implemented

Packages for radiactive waste disposal

International Nuclear Information System (INIS)

Oliveira, R. de.

1983-01-01

The development of multi-stage type package for sea disposal of compactable nuclear wastes, is presented. The basic requirements for the project followed the NEA and IAEA recommendations and observations of the solutions adopted by others countries. The packages of preliminary design was analysed, by computer, under several conditions arising out of its nature, as well as their conditions descent, dumping and durability in the deep of sea. The designed pressure equalization mechanic and the effect compacting on the package, by prototypes and specific tests, were studied. These prototypes were also submitted to the transport tests of the 'Regulament for the Safe Transport of Radioactive Materials'. Based on results of the testes and the re-evaluation of the preliminary design, final indications and specifications for excuting the package design, are presented. (M.C.K.) [pt

The impact of packaging transparency on product attractiveness

Directory of Open Access Journals (Sweden)

Barbara Sabo

2017-12-01

Full Text Available The aim of the study was to investigate the impact of different levels of packaging transparency on the evaluation of attractiveness of a product within the packaging, in relation to whether it is a healthy or unhealthy product. Consumer preferences during buying decision process were also investigated. The study was conducted by two methods. The first one was related to consumer preferences and was based on a choice task, while the other one was related to packaging attractiveness and was based on subjective evaluation expressed through the Likert scale. Eight samples of packaging were used. They differed according to product type (healthy and unhealthy, and the level of transparency (fully transparent packaging, packaging with two windows, packaging with one window and non-transparent packaging. According to the results, consumers tend to ignore non-transparent packaging, regardless the product healthiness. The findings indicate the importance of thoughtful selection of packaging structure and its material in design process and launching the food products on the retail market.

21 CFR 610.61 - Package label.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Package label. 610.61 Section 610.61 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.61 Package label. The following items shall appear on the label affixed to each package containing a product: (a) The proper name of the product; (b...

Flexible Generation of E-Learning Exams in R: Moodle Quizzes, OLAT Assessments, and Beyond

Directory of Open Access Journals (Sweden)

Achim Zeileis

2014-06-01

Full Text Available The capabilities of the package exams for automatic generation of (statistical exams in R are extended by adding support for learning management systems: As in earlier versions of the package exam generation is still based on separate Sweave ?les for each exercise but rather than just producing di?erent types of PDF output ?les, the package can now render the same exercises into a wide variety of output formats. These include HTML (with various options for displaying mathematical content and XML speci?cations for online exams in learning management systems such as Moodle or OLAT. This ?exibility is accomplished by a new modular and extensible design of the package that allows for reading all weaved exercises into R and managing associated supplementary ?les (such as graphics or data ?les. The manuscript discusses the readily available user interfaces, the design of the underlying infrastructure, and how new functionality can be built on top of the existing tools.

Test for radioactive material transport package safety

International Nuclear Information System (INIS)

Li Guoqiang; Zhao Bing; Zhang Jiangang; Wang Xuexin; Ma Anping

2012-01-01

Regulations on radioactive material transport in China were introduced. Test facilities and data acquiring instruments for radioactive material package in China Institute for Radiation Protection were also introduced in this paper, which were used in drop test and thermal test. Test facilities were constructed according to the requirements of IAEA's 'Regulations for the Safe Transport of Radioactive Material' (TS-R-l) and Chinese 'Regulations for the Safe Transport of Radioactive Material' (GB 11806-2004). Drop test facilities were used in free drop test, penetration test, mechanical test (free drop test Ⅰ, free drop test Ⅱ and free drop test Ⅲ) of type A and type B packages weighing less than thirteen tons. Thermal test of type B packages can be carried out in the thermal test facilities. Certification tests of type FCo70-YQ package, type 30A-HB-01 package, type SY-I package and type XAYT-I package according to regulations were done using these facilities. (authors)

Consumer response to packaging design: The role of packaging materials and graphics in sustainability perceptions and product evaluations

NARCIS (Netherlands)

Steenis, N.D.; Herpen, E. van; Lans, I.A. van der; Ligthart, T.N.; Trijp, H.C.M. van

2017-01-01

Building on theories of cue utilization, this paper investigates whether and how packaging sustainability influences consumer perceptions, inferences and attitudes towards packaged products. A framework is tested in an empirical study among 249 students using soup products varying in packaging

Package Design Affects Accuracy Recognition for Medications.

Science.gov (United States)

Endestad, Tor; Wortinger, Laura A; Madsen, Steinar; Hortemo, Sigurd

2016-12-01

Our aim was to test if highlighting and placement of substance name on medication package have the potential to reduce patient errors. An unintentional overdose of medication is a large health issue that might be linked to medication package design. In two experiments, placement, background color, and the active ingredient of generic medication packages were manipulated according to best human factors guidelines to reduce causes of labeling-related patient errors. In two experiments, we compared the original packaging with packages where we varied placement of the name, dose, and background of the active ingredient. Age-relevant differences and the effect of color on medication recognition error were tested. In Experiment 1, 59 volunteers (30 elderly and 29 young students), participated. In Experiment 2, 25 volunteers participated. The most common error was the inability to identify that two different packages contained the same active ingredient (young, 41%, and elderly, 68%). This kind of error decreased with the redesigned packages (young, 8%, and elderly, 16%). Confusion errors related to color design were reduced by two thirds in the redesigned packages compared with original generic medications. Prominent placement of substance name and dose with a band of high-contrast color support recognition of the active substance in medications. A simple modification including highlighting and placing the name of the active ingredient in the upper right-hand corner of the package helps users realize that two different packages can contain the same active substance, thus reducing the risk of inadvertent medication overdose. © 2016, Human Factors and Ergonomics Society.

Active and intelligent packaging systems for a modern society.

Science.gov (United States)

Realini, Carolina E; Marcos, Begonya

2014-11-01

Active and intelligent packaging systems are continuously evolving in response to growing challenges from a modern society. This article reviews: (1) the different categories of active and intelligent packaging concepts and currently available commercial applications, (2) latest packaging research trends and innovations, and (3) the growth perspectives of the active and intelligent packaging market. Active packaging aiming at extending shelf life or improving safety while maintaining quality is progressing towards the incorporation of natural active agents into more sustainable packaging materials. Intelligent packaging systems which monitor the condition of the packed food or its environment are progressing towards more cost-effective, convenient and integrated systems to provide innovative packaging solutions. Market growth is expected for active packaging with leading shares for moisture absorbers, oxygen scavengers, microwave susceptors and antimicrobial packaging. The market for intelligent packaging is also promising with strong gains for time-temperature indicator labels and advancements in the integration of intelligent concepts into packaging materials. Copyright © 2014 Elsevier Ltd. All rights reserved.

Transportation package design using numerical optimization

International Nuclear Information System (INIS)

Harding, D.C.; Witkowski, W.R.

1991-01-01

The purpose of this overview is twofold: first, to outline the theory and basic elements of numerical optimization; and second, to show how numerical optimization can be applied to the transportation packaging industry and used to increase efficiency and safety of radioactive and hazardous material transportation packages. A more extensive review of numerical optimization and its applications to radioactive material transportation package design was performed previously by the authors (Witkowski and Harding 1992). A proof-of-concept Type B package design is also presented as a simplified example of potential improvements achievable using numerical optimization in the design process

Safkeg - a modern family of packages

International Nuclear Information System (INIS)

Vaughan, R.A.

1998-01-01

The SAFKEG family of package were developed specifically to replace existing fissile material packages designs which are based on 30 year old design concepts. The SAFKEG replaces 2 design concepts: the wood cadmium rectilinear packages used in the UK and 6M drum packages commonly used in the USA. The design principles used in the SAFKEG are relatively novel, but were adopted specifically to provide a large design margin at a reasonable cost. The design features were chosen to facilitate the licensing process and to provide operational convenience. The current designs, including those just about to be brought into service, are summarized. (authors)

Documentation package for the RFID temperature monitoring system (Model 9977 packages at NTS)

International Nuclear Information System (INIS)

Chen, K.; Tsai, H.

2009-01-01

The technical basis for extending the Model 9977 shipping package periodic maintenance beyond the one-year interval to a maximum of five years is based on the performance of the O-ring seals and the environmental conditions. The DOE Packaging Certification Program (PCP) has tasked Argonne National Laboratory to develop a Radio-Frequency Identification (RFID) temperature monitoring system for use by the facility personnel at DAF/NTS. The RFID temperature monitoring system, depicted in the figure below, consists of the Mk-1 RFId tags, a reader, and a control computer mounted on a mobile platform that can operate as a stand-alone system, or it can be connected to the local IT network. As part of the Conditions of Approval of the CoC, the user must complete the prescribed training to become qualified and be certified for operation of the RFID temperature monitoring system. The training course will be administered by Argonne National Laboratory on behalf of the Headquarters Certifying Official. This is a complete documentation package for the RFID temperature monitoring system of the Model 9977 packagings at NTS. The documentation package will be used for training and certification. The table of contents are: Acceptance Testing Procedure of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Acceptance Testing Result of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Performance Test of the Single Bolt Seal Sensor for the Model 9977 Packaging; Calibration of Built-in Thermistors in RFID Tags for Nevada Test Site; Results of Calibration of Built-in Thermistors in RFID Tags; Results of Thermal Calibration of Second Batch of MK-I RFID Tags; Procedure for Installing and Removing MK-1 RFID Tag on Model 9977 Drum; User Guide for RFID Reader and Software for Temperature Monitoring of Model 9977 Drums at NTS; Software Quality Assurance Plan (SQAP) for the ARG-US System; Quality Category for the RFID Temperature Monitoring System; The

Analysis on the Industrial Design of Food Package and the Component of Hazardous Substance in the Packaging Material

OpenAIRE

Wei-Wen Huang

2015-01-01

Transferring the hazardous chemicals contained in food packaging materials into food would threaten the health of consumers, therefore, the related laws and regulations and the detection method of hazardous substance have been established at home and abroad to ensure the safety to use the food packaging material. According to the analysis on the hazardous component in the food packaging, a set of detection methods for hazardous substance in the food packaging was established in the paper and ...

Packagings in the silicon era

International Nuclear Information System (INIS)

Beone, G.; Mione, A.; Orsini, A.; Forasassi, G.

1993-01-01

ENEA is studying, with the collaboration of the DCMN of the Pisa University, a new packaging to collect wastes in various facilities while proceeding to find a final disposal. Following a survey on the wastes that could be transported in the future, it was agreed to design a packaging able to contain an industrial drum, with a maximum capacity of 220 litres and a total weight less than 4000 N, previously filled with solid wastes in bulk or in a solid binding material. The packaging, to be approved as a Type B in agreement with the IAEA Regulations, will be useful to transport not only radioactive wastes but any kind of dangerous goods and also those not in agreement with the UNO Regulations. The 1/2 scale model of the packaging is formed by two concentric vessels of mild steel obtained by welding commercial shells to cylindrical walls and joined through a flange. The new packaging under development presents features that seem to be proper for its envisaged waste collection main use such as construction simplicity, relatively low cost, time and use endurance, low maintenance requirements. The design analysis and testing program ongoing at present allowed for the preliminary definition of the packaging geometry and confirmed the necessity of further investigations in some key areas as the determination of actual behaviour of the silicon foam, used as energy absorbing/thermal insulating material, in the specific conditions of interest. (J.P.N.)

Extreme temperature packaging: challenges and opportunities

Science.gov (United States)

Johnson, R. Wayne

2016-05-01

Consumer electronics account for the majority of electronics manufactured today. Given the temperature limits of humans, consumer electronics are typically rated for operation from -40°C to +85°C. Military applications extend the range to -65°C to +125°C while underhood automotive electronics may see +150°C. With the proliferation of the Internet of Things (IoT), the goal of instrumenting (sensing, computation, transmission) to improve safety and performance in high temperature environments such as geothermal wells, nuclear reactors, combustion chambers, industrial processes, etc. requires sensors, electronics and packaging compatible with these environments. Advances in wide bandgap semiconductors (SiC and GaN) allow the fabrication of high temperature compatible sensors and electronics. Integration and packaging of these devices is required for implementation into actual applications. The basic elements of packaging are die attach, electrical interconnection and the package or housing. Consumer electronics typically use conductive adhesives or low melting point solders for die attach, wire bonds or low melting solder for electrical interconnection and epoxy for the package. These materials melt or decompose in high temperature environments. This paper examines materials and processes for high temperature packaging including liquid transient phase and sintered nanoparticle die attach, high melting point wires for wire bonding and metal and ceramic packages. The limitations of currently available solutions will also be discussed.

Learning styles: individualizing computer-based learning environments

Directory of Open Access Journals (Sweden)

Tim Musson

1995-12-01

Full Text Available While the need to adapt teaching to the needs of a student is generally acknowledged (see Corno and Snow, 1986, for a wide review of the literature, little is known about the impact of individual learner-differences on the quality of learning attained within computer-based learning environments (CBLEs. What evidence there is appears to support the notion that individual differences have implications for the degree of success or failure experienced by students (Ford and Ford, 1992 and by trainee end-users of software packages (Bostrom et al, 1990. The problem is to identify the way in which specific individual characteristics of a student interact with particular features of a CBLE, and how the interaction affects the quality of the resultant learning. Teaching in a CBLE is likely to require a subset of teaching strategies different from that subset appropriate to more traditional environments, and the use of a machine may elicit different behaviours from those normally arising in a classroom context.

Medical students’ perceptions of using e-learning to enhance the acquisition of consulting skills

Directory of Open Access Journals (Sweden)

Warnecke E

2011-06-01

Full Text Available BackgroundThis study aims to evaluate medical students’ perception ofthe usefulness and effectiveness of an e-learning packagedeveloped to enhance the acquisition of consulting skills.MethodA survey with mixed method data analysis was conducted.Participants were 67 medical students completing theirthird year primary care rotation as part of a five-year degreeat the University of Tasmania. Participants completed a 10question anonymous online survey after using the elearningpackageResultsOf the participants, 92% found it enjoyable and 95% foundthe e-learning package useful; 75% perceived it to beeffective in increasing their performance and 91% believedit increased their knowledge in consulting skills. Benefits forparticipants’ confidence, style and structure of consultingskills were found.ConclusionParticipants found the e-learning package to be enjoyableand effective. E-learning should be further utilised in ablended learning environment to support face-to-faceteaching in consulting skills.

A Kinetic Model for Predicting the Relative Humidity in Modified Atmosphere Packaging and Its Application in Lentinula edodes Packages

Directory of Open Access Journals (Sweden)

Li-xin Lu

2013-01-01

Full Text Available Adjusting and controlling the relative humidity (RH inside package is crucial for ensuring the quality of modified atmosphere packaging (MAP of fresh produce. In this paper, an improved kinetic model for predicting the RH in MAP was developed. The model was based on heat exchange and gases mass transport phenomena across the package, gases heat convection inside the package, and mass and heat balances accounting for the respiration and transpiration behavior of fresh produce. Then the model was applied to predict the RH in MAP of fresh Lentinula edodes (one kind of Chinese mushroom. The model equations were solved numerically using Adams-Moulton method to predict the RH in model packages. In general, the model predictions agreed well with the experimental data, except that the model predictions were slightly high in the initial period. The effect of the initial gas composition on the RH in packages was notable. In MAP of lower oxygen and higher carbon dioxide concentrations, the ascending rate of the RH was reduced, and the RH inside packages was saturated slowly during storage. The influence of the initial gas composition on the temperature inside package was not much notable.

Developing an e-learning resource for nurse airway assistants in the emergency department.

Science.gov (United States)

Hersey, Peter; McAleer, Sean

2017-02-23

The aims of this project were to determine the required competencies for a nurse in the emergency department assisting with a rapid sequence induction of anaesthesia (RSI), and to produce a relevant e-learning resource. A three-round multidisciplinary Delphi process produced the following competencies: ability to describe the steps and sequence of events of an RSI, familiarity with the equipment used during an RSI, ability to recognise and help manage problems occurring during an RSI, ability to prepare for an RSI, ability to apply cricoid pressure, and understanding the modification of an RSI in special circumstances. An interactive e-learning package was produced and made available online. Twelve emergency department nurses took part in an evaluation of the e-learning package. All either agreed or strongly agreed that they had increased their knowledge and found the learning useful, and 11 out of 12 nurses reported being somewhat or very confident in the role of airway assistant following completion of the learning.

Development of test algorithm for semiconductor package with defects by using probabilistic neural network

International Nuclear Information System (INIS)

Kim, Jae Yeol; Sim, Jae Gi; Ko, Myoung Soo; Kim, Chang Hyun; Kim, Hun Cho

2001-01-01

In this study, researchers developing the estimative algorithm for artificial defects in semiconductor packages and performing it by pattern recognition technology. For this purpose, the estimative algorithm was included that researchers made software with MATLAB. The software consists of some procedures including ultrasonic image acquisition, equalization filtering, Self-Organizing Map and Probabilistic Neural Network. Self-Organizing Map and Probabilistic Neural Network are belong to methods of Neural Networks. And the pattern recognition technology has applied to classify three kinds of detective patterns in semiconductor packages. This study presumes probability density function from a sample of learning and present which is automatically determine method. PNN can distinguish flaws very difficult distinction as well as. This can do parallel process to stand in a row we confirm that is very efficiently classifier if we applied many data real the process.

Packaging Technologies for High Temperature Electronics and Sensors

Science.gov (United States)

Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

2013-01-01

This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

Integration of Experience API Into CDET’s E-Learning

Science.gov (United States)

2016-06-01

50 x THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF TABLES Table 1. SaaS Pricing Strategies. Adapted from...Learning Record Store MCU Marine Corps University PIF Package Interchange File PME Professional Military Education SaaS Software as a Service...method consists of an e- learning course with xAPI and utilizes existing software as a service ( SaaS ) learning technologies to create a new way to use

Wrapping up your message : Sustainable storytelling through packaging

NARCIS (Netherlands)

Wever, R.; Schermer, R.; Smit, L.; Vos, L.

2015-01-01

Besides contributing to the actual sustainability performance of a product-packaging combination, packaging can also play a role in communicating about sustainability. Such green marketing aspects of packaging may either focus on the sustainability credentials of the packaging itself, or on the

16 CFR 1700.15 - Poison prevention packaging standards.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

An Object-Oriented Serial DSMC Simulation Package

Science.gov (United States)

Liu, Hongli; Cai, Chunpei

2011-05-01

A newly developed three-dimensional direct simulation Monte Carlo (DSMC) simulation package, named GRASP ("Generalized Rarefied gAs Simulation Package"), is reported in this paper. This package utilizes the concept of simulation engine, many C++ features and software design patterns. The package has an open architecture which can benefit further development and maintenance of the code. In order to reduce the engineering time for three-dimensional models, a hybrid grid scheme, combined with a flexible data structure compiled by C++ language, are implemented in this package. This scheme utilizes a local data structure based on the computational cell to achieve high performance on workstation processors. This data structure allows the DSMC algorithm to be very efficiently parallelized with domain decomposition and it provides much flexibility in terms of grid types. This package can utilize traditional structured, unstructured or hybrid grids within the framework of a single code to model arbitrarily complex geometries and to simulate rarefied gas flows. Benchmark test cases indicate that this package has satisfactory accuracy for complex rarefied gas flows.

TopView - ATLAS top physics analysis package

CERN Document Server

Shibata, A

2007-01-01

TopView is a common analysis package which is widely used in the ATLAS top physics working group. The package is fully based on the official ATLAS software Athena and EventView and playing a central role in the collaborative analysis model. It is a functional package which accounts for a broad range issues in implementing physics analysis. As well as being a modular framework suitable as a common workplace for collaborators, TopView implements numerous analysis tools including a complete top-antitop reconstruction and single top reconstruction. The package is currently used to produce common ntuple from Monte Carlo production and future use cases are under rapid development. In this paper, the design and ideas behind TopView and the performance of the analyses implemented in the package are presented with detailed documentation of the contents and instruction for using the package.

Cooperation of an RNA Packaging Signal and a Viral Envelope Protein in Coronavirus RNA Packaging

OpenAIRE

Narayanan, Krishna; Makino, Shinji

2001-01-01

Murine coronavirus mouse hepatitis virus (MHV) produces a genome-length mRNA, mRNA 1, and six or seven species of subgenomic mRNAs in infected cells. Among these mRNAs, only mRNA 1 is efficiently packaged into MHV particles. MHV N protein binds to all MHV mRNAs, whereas envelope M protein interacts only with mRNA 1. This M protein-mRNA 1 interaction most probably determines the selective packaging of mRNA 1 into MHV particles. A short cis-acting MHV RNA packaging signal is necessary and suffi...

The LCDROOT Analysis Package

International Nuclear Information System (INIS)

Abe, Toshinori

2001-01-01

The North American Linear Collider Detector group has developed simulation and analysis program packages. LCDROOT is one of the packages, and is based on ROOT and the C++ programing language to maximally benefit from object oriented programming techniques. LCDROOT is constantly improved and now has a new topological vertex finder, ZVTOP3. In this proceeding, the features of the LCDROOT simulation are briefly described

Directory of Certificates of Compliance for Radioactive Materials Packages: Report of NRC Approved Packages

International Nuclear Information System (INIS)

1993-10-01

This directory contains a Report of NRC Approved Packages (Volume 1). The purpose of this directory is to make available a convenient source of information on Quality Assurance Programs and Packagings which have been approved by the US Nuclear Regulatory Commission. Shipments of radioactive material utilizing these packagings must be in accordance with the provisions of 49 CFR section 173.471 and 10 CFR Part 71, as applicable. In satisfying the requirements of Section 71.12, it is the responsibility of the licensees to insure themselves that they have a copy of the current approval and conduct their transportation activities in accordance with an NRC approved quality assurance program

Safety analysis report for packaging: the ORNL DOT specification 6M - special form package

Energy Technology Data Exchange (ETDEWEB)

Schaich, R.W.

1982-07-01

The ORNL DOT Specification 6M - Special Form Package was fabricated at the Oak Ridge Nation al Laboratory (ORNL) for the transport of Type B solid non-fissile radioactive materials in special form. The package was evaluated on the basis of tests performed by the Dow Chemical Company, Rocky Flats Division, on the DOT-6M container and special form tests performed on a variety of stainless steel capsules at ORNL by Operations Division personnel. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of Type B quantities in special form of non-fissile radioactive materials.

Safety analysis report for packaging: the ORNL DOT specification 6M - special form package

International Nuclear Information System (INIS)

Schaich, R.W.

1982-07-01

The ORNL DOT Specification 6M - Special Form Package was fabricated at the Oak Ridge Nation al Laboratory (ORNL) for the transport of Type B solid non-fissile radioactive materials in special form. The package was evaluated on the basis of tests performed by the Dow Chemical Company, Rocky Flats Division, on the DOT-6M container and special form tests performed on a variety of stainless steel capsules at ORNL by Operations Division personnel. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of Type B quantities in special form of non-fissile radioactive materials

Safety analysis report for packaging: the ORNL DOT specification 6M - tritium trap package

International Nuclear Information System (INIS)

DeVore, J.R.

1984-04-01

The ORNL DOT Specification 6M--Tritium Trap Package was fabricated at the Oak Ridge National Laboratory (ORNL) for the transport of Type B quantities of tritium as solid uranium tritide. The package was evaluated on the basis of tests performed by the Dow Chemical Company, Rocky Flats Division, on the DOT-6M container, a drop test performed by the ORNL Operations Division, and International Atomic Energy Agency (IAEA) approvals on a similar tritium transport container. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of Type B quantities of tritium. 4 references, 8 figures

The LEONARDO-DA-VINCI pilot project "e-learning-assistant" - Situation-based learning in nursing education.

Science.gov (United States)

Pfefferle, Petra Ina; Van den Stock, Etienne; Nauerth, Annette

2010-07-01

E-learning will play an important role in the training portfolio of students in higher and vocational education. Within the LEONARDO-DA-VINCI action programme transnational pilot projects were funded by the European Union, which aimed to improve the usage and quality of e-learning tools in education and professional training. The overall aim of the LEONARDO-DA-VINCI pilot project "e-learning-assistant" was to create new didactical and technical e-learning tools for Europe-wide use in nursing education. Based on a new situation-oriented learning approach, nursing teachers enrolled in the project were instructed to adapt, develop and implement e- and blended learning units. According to the training contents nursing modules were developed by teachers from partner institutions, implemented in the project centers and evaluated by students. The user-package "e-learning-assistant" as a product of the project includes two teacher training units, the authoring tool "synapse" to create situation-based e-learning units, a student's learning platform containing blended learning modules in nursing and an open sourced web-based communication centre. Copyright 2009 Elsevier Ltd. All rights reserved.

49 CFR 173.465 - Type A packaging tests.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Type A packaging tests. 173.465 Section 173.465 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.465 Type A packaging tests. (a) The packaging...

Single-molecule packaging initiation in real time by a viral DNA packaging machine from bacteriophage T4.

Science.gov (United States)

Vafabakhsh, Reza; Kondabagil, Kiran; Earnest, Tyler; Lee, Kyung Suk; Zhang, Zhihong; Dai, Li; Dahmen, Karin A; Rao, Venigalla B; Ha, Taekjip

2014-10-21

Viral DNA packaging motors are among the most powerful molecular motors known. A variety of structural, biochemical, and single-molecule biophysical approaches have been used to understand their mechanochemistry. However, packaging initiation has been difficult to analyze because of its transient and highly dynamic nature. Here, we developed a single-molecule fluorescence assay that allowed visualization of packaging initiation and reinitiation in real time and quantification of motor assembly and initiation kinetics. We observed that a single bacteriophage T4 packaging machine can package multiple DNA molecules in bursts of activity separated by long pauses, suggesting that it switches between active and quiescent states. Multiple initiation pathways were discovered including, unexpectedly, direct DNA binding to the capsid portal followed by recruitment of motor subunits. Rapid succession of ATP hydrolysis was essential for efficient initiation. These observations have implications for the evolution of icosahedral viruses and regulation of virus assembly.

Developments in the active packaging of foods

NARCIS (Netherlands)

Vermeiren, L.; Devlieghere, F.; Beest, M. van; Kruijf, N. de; Debevere, J.

1999-01-01

Active packaging is one of the innovative food packaging concepts that has been introduced as a response to the continuous changes in current consumer demands and market trends. Major active packaging techniques are concerned with substances that absorb oxygen, ethylene, moisture, carbon dioxide,

An R package for the integrated analysis of metabolomics and spectral data.

Science.gov (United States)

Costa, Christopher; Maraschin, Marcelo; Rocha, Miguel

2016-06-01

Recently, there has been a growing interest in the field of metabolomics, materialized by a remarkable growth in experimental techniques, available data and related biological applications. Indeed, techniques as nuclear magnetic resonance, gas or liquid chromatography, mass spectrometry, infrared and UV-visible spectroscopies have provided extensive datasets that can help in tasks as biological and biomedical discovery, biotechnology and drug development. However, as it happens with other omics data, the analysis of metabolomics datasets provides multiple challenges, both in terms of methodologies and in the development of appropriate computational tools. Indeed, from the available software tools, none addresses the multiplicity of existing techniques and data analysis tasks. In this work, we make available a novel R package, named specmine, which provides a set of methods for metabolomics data analysis, including data loading in different formats, pre-processing, metabolite identification, univariate and multivariate data analysis, machine learning, and feature selection. Importantly, the implemented methods provide adequate support for the analysis of data from diverse experimental techniques, integrating a large set of functions from several R packages in a powerful, yet simple to use environment. The package, already available in CRAN, is accompanied by a web site where users can deposit datasets, scripts and analysis reports to be shared with the community, promoting the efficient sharing of metabolomics data analysis pipelines. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Technical Review Report for the Model 9975-96 Package Safety Analysis Report for Packaging (S-SARP-G-00003, Revision 0, January 2008)

International Nuclear Information System (INIS)

West, M.

2009-01-01

This Technical Review Report (TRR) documents the review, performed by the Lawrence Livermore National Laboratory (LLNL) Staff, at the request of the U.S. Department of Energy (DOE), on the Safety Analysis Report for Packaging, Model 9975, Revision 0, dated January 2008 (S-SARP-G-00003, the SARP). The review includes an evaluation of the SARP, with respect to the requirements specified in 10 CFR 71, and in International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1. The Model 9975-96 Package is a 35-gallon drum package design that has evolved from a family of packages designed by DOE contractors at the Savannah River Site. Earlier package designs, i.e., the Model 9965, the Model 9966, the Model 9967, and the Model 9968 Packagings, were originally designed and certified in the early 1980s. In the 1990s, updated package designs that incorporated design features consistent with the then newer safety requirements were proposed. The updated package designs at the time were the Model 9972, the Model 9973, the Model 9974, and the Model 9975 Packagings, respectively. The Model 9975 Package was certified by the Packaging Certification Program, under the Office of Safety Management and Operations. The safety analysis of the Model 9975-85 Packaging is documented in the Safety Analysis Report for Packaging, Model 9975, B(M)F-85, Revision 0, dated December 2003. The Model 9975-85 Package is certified by DOE Certificate of Compliance (CoC) package identification number, USA/9975/B(M)F-85, for the transportation of Type B quantities of uranium metal/oxide, 238 Pu heat sources, plutonium/uranium metals, plutonium/uranium oxides, plutonium composites, plutonium/tantalum composites, 238 Pu oxide/beryllium metal.

Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

International Nuclear Information System (INIS)

Mccoy, J.C.

1997-01-01

The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

Packaging review guide for reviewing safety analysis reports for packagings: Revision 0

International Nuclear Information System (INIS)

Fischer, L.E.; Chou, C.K.; Lloyd, W.R.; Mount, M.E.; Nelson, T.A.; Schwartz, M.W.; Witte, M.C.

1987-09-01

The Department of Energy (DOE) has established procedures for obtaining certification of packagings used by DOE and its contractors for the transport of radioactive materials. These certification review policies and procedures are established to ensure that DOE packaging designs and operations meet safety criteria at least equivalent to the standards prescribed by the Nuclear Regulatory Commission (NRC) certification process for packaging. The Packaging Review Guide (PRG) is not a DOE order, but has been prepared as guidance for the Packaging Certification Staff (PCS) under the Certifying Official, Office of Security Evaluations, or designated representatives. The principal purpose of the PRG is to assure the quality and uniformity of PCS reviews, and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. The PRG also sets forth solutions and approaches determined to be acceptable in the past by the PCS in dealing with a specific safety issue or safety-related design area. These solutions and approaches are presented in this form so that reviewers can take consistent and well-understood positions as the same safety issues arise in future cases. An applicant submitting a SARP does not have to follow the solutions or approaches presented in the PRG. However, applicants should recognize that the PCS has spent substantial time and effort in reviewing and developing their positions for the issues. A corresponding amount of time and effort will probably be required to review and accept new or different solutions and approaches. Finally, it is also a purpose of the PRG to make information about DOE certification policy and procedures widely available to DOE field offices, DOE contractors, federal agencies, and interested members of the public. 7 refs., 15 figs., 14 tabs

Nanocellulose in green food packaging.

Science.gov (United States)

Vilarinho, Fernanda; Sanches Silva, Ana; Vaz, M Fátima; Farinha, José Paulo

2017-01-26

The development of packaging materials with new functionalities and lower environmental impact is now an urgent need of our society. On one hand, the shelf-life extension of packaged products can be an answer to the exponential increase of worldwide demand for food. On the other hand, uncertainty of crude oil prices and reserves has imposed the necessity to find raw materials to replace oil-derived polymers. Additionally, consumers' awareness toward environmental issues increasingly pushes industries to look with renewed interest to "green" solutions. In response to these issues, numerous polymers have been exploited to develop biodegradable food packaging materials. Although the use of biopolymers has been limited due to their poor mechanical and barrier properties, these can be enhanced by adding reinforcing nanosized components to form nanocomposites. Cellulose is probably the most used and well-known renewable and sustainable raw material. The mechanical properties, reinforcing capabilities, abundance, low density, and biodegradability of nanosized cellulose make it an ideal candidate for polymer nanocomposites processing. Here we review the potential applications of cellulose based nanocomposites in food packaging materials, highlighting the several types of biopolymers with nanocellulose fillers that have been used to form bio-nanocomposite materials. The trends in nanocellulose packaging applications are also addressed.

Hazardous materials package performance regulations

International Nuclear Information System (INIS)

Russell, N.A.; Glass, R.E.; McClure, J.D.; Finley, N.C.

1993-01-01

Two regulatory philosophies, one based on 'specification' packaging standards and the other based on 'performance' packaging standards, currently define the hazmat packaging certification process. A main concern when setting performance standards is determining the appropriate standards necessary to assure adequate public protection. This paper discusses a Hazmat Packaging Performance Evaluation (HPPE) project being conducted at Sandia National Laboratories for the U.S. Department of Transportation Research and Special Programs Administration. In this project, the current bulk packagings (larger than 2000 gallons) for transporting Materials Extremely Toxic By Inhalation (METBI) are being evaluated and performance standards will be recommended. A computer software system, HazCon, has been developed which can calculate the dispersion of dense, neutral, and buoyant gases. HazCon also has a database of thermodynamic and toxicity data for the METBI materials, a user-friendly menu-driven format for creating input data sets for calculating dispersion of the METBI in the event of an accidental release, and a link between the METBI database and the dense gas dispersion code (which requires thermodynamic properties). The primary output of HazCon is a listing of mass concentrations of the released material at distances downwind from the release point. (J.P.N.)

Antimicrobial nanomaterials for food packaging applications

Directory of Open Access Journals (Sweden)

Radusin Tanja I.

2016-01-01

Full Text Available Food packaging industry presents one of the fastest growing industries nowadays. New trends in this industry, which include reducing food as well as packaging waste, improved preservation of food and prolonged shelf-life together with substitution of petrochemical sources with renewable ones are leading to development of this industrial area in diverse directions. This multidisciplinary challenge is set up both in front of food and material scientists. Nanotechnology is recently answering to these challenges, with different solutions-from improvements in materials properties to active packaging solutions, or both at the same time. Incorporation of nanoparticles into polymer matrix and preparation of hybrid materials is one of the methods of modification of polymer properties. Nano scaled materials with antimicrobial properties can act as active components when added into polymer, thereby leading to prolonged protective function of pristine food packaging material. This paper presents a review in the field of antimicrobial nanomaterials for food packaging in turn of technology, application and regulatory issues.

49 CFR 173.206 - Packaging requirements for chlorosilanes.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Packaging requirements for chlorosilanes. 173.206...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Non-bulk Packaging for Hazardous Materials Other Than Class 1 and Class 7 § 173.206 Packaging requirements for chlorosilanes. (a) When § 172.101 of this...

Commercial Spent Nuclear Fuel Waste Package Misload Analysis

International Nuclear Information System (INIS)

J.K. Knudson

2003-01-01

The purpose of this calculation is to estimate the probability of misloading a commercial spent nuclear fuel waste package with a fuel assembly(s) that has a reactivity (i.e., enrichment and/or burnup) outside the waste package design. The waste package designs are based on the expected commercial spent nuclear fuel assemblies and previous analyses (Macheret, P. 2001, Section 4.1 and Table 1). For this calculation, a misloaded waste package is defined as a waste package that has a fuel assembly(s) loaded into it with an enrichment and/or burnup outside the waste package design. An example of this type of misload is a fuel assembly designated for the 21-PWR Control Rod waste package being incorrectly loaded into a 21-PWR Absorber Plate waste package. This constitutes a misloaded 21-PWR Absorber Plate waste package, because the reactivity (i.e., enrichment and/or burnup) of a 21-PWR Control Rod waste package fuel assembly is outside the design of a 21-PWR Absorber Plate waste package. These types of misloads (i.e., fuel assembly with enrichment and/or burnup outside waste package design) are the only types that are evaluated in this calculation. This calculation utilizes information from ''Frequency of SNF Misload for Uncanistered Fuel Waste Package'' (CRWMS M and O 1998) as the starting point. The scope of this calculation is limited to the information available. The information is based on the whole population of fuel assemblies and the whole population of waste packages, because there is no information about the arrival of the waste stream at this time. The scope of this calculation deviates from that specified in ''Technical Work Plan for: Risk and Criticality Department'' (BSC 2002a, Section 2.1.30) in that only waste package misload is evaluated. The remaining issues identified (i.e., flooding and geometry reconfiguration) will be addressed elsewhere. The intended use of the calculation is to provide information and inputs to the Preclosure Safety Analysis

Light Barrier for Non-Foil Packaging

Science.gov (United States)

2010-12-16

foil and all-plastic materials were retorted and a second set of all-plastic packaged entrees were Microwave Sterilized on the Washington State...Copolymers for Retort Applications; SPE Polyolefins and Flexible Packaging Conference: Society of Plastics Engineers. Newtown. CT, 43pp. Thellen C...Final Scientific Report Light Barrier for Non-Foil Packaging Contract No. W911QY-08-C-0132 Final Scientific Report Contract No. W911QY-08-C-0132

ANTIMICROBIALS USED IN ACTIVE PACKAGING FILMS

OpenAIRE

Dıblan, Sevgin; Kaya, Sevim

2017-01-01

Active packaging technology is one of the innovativemethods for preserving of food products, and antimicrobial packaging films is amajor branch and promising application of this technology. In order to controlmicrobial spoilage and also contamination of pathogen onto processed or fresh food,antimicrobial agent(s) is/are incorporated into food packaging structure.Polymer type as a carrier of antimicrobial can be petroleum-based plastic orbiopolymer: because of environmental concerns researcher...

Extend Instruction outside the Classroom: Take Advantage of Your Learning Management System

Science.gov (United States)

Jensen, Lauren A.

2010-01-01

Numerous institutions of higher education have implemented a learning management system (LMS) or are considering doing so. This web-based software package provides self-service and quick (often personalized) access to content in a dynamic environment. Learning management systems support administrative, reporting, and documentation activities. LMSs…

49 CFR 173.60 - General packaging requirements for explosives.

Science.gov (United States)

2010-10-01

... explosives contained in the package, so that neither interaction between the explosives and the packaging... 49 Transportation 2 2010-10-01 2010-10-01 false General packaging requirements for explosives. 173...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Definitions, Classification and Packaging for Class 1...

The future of active and intelligent packaging industry

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2013-06-01

Full Text Available Background: Innovation in food and beverage packaging is mostly driven by consumer needs and demands influenced by changing global trends, such as increased life expectancy, fewer organizations investing in food production and distribution. Food industry has seen great advances in the packaging sector since its inception in the 18th century with most active and intelligent innovations occurring during the past century. These advances have led to improved food quality and safety. Active and intelligent packaging is new and exciting area of technology  which efficient contemporary consumer response. Materials and methods: On the basis of broad review of the current state of the art in world literature, the market active and intelligent packaging is discussed. Results: This paper shows present innovation in the market active and intelligent packaging. Conclusion: Research and development in the field of active and intelligent packaging materials is very dynamic and develops in relation with the search for environment friendly packaging solutions. Besides, active and intelligent packaging is becoming more and more widely used for food products. The future of this type of packaging system seems to be very interesting.

Best practices and recommendations on policy packaging

DEFF Research Database (Denmark)

Fearnley, Nils; Longva, Frode; Ramjerdi, Farideh

2011-01-01

. This report gives practical and general advice for each of these stages: 1. Define objectives and targets 2. Create an inventory of measures, identify potential primary measures and detect causal relationships 3. Assess policy package 4. Modify package 5. Package implementation 6. Evaluate effects, introduce...

Effects of packaging and irradiation on cut vegetables

International Nuclear Information System (INIS)

Langerak, D.I.

1980-01-01

A disadvantage of packaging cut vegetables is that it accelerates microbial spoilage in the product, resulting in an unfavourable gas composition (too low O 2 content) in the packaging, which promotes fermentation. For this reason perforations in the packaging material are necessary in practise to increase the O 2 content in the packaging by which the favourable effect on the quality is partly lost. Application of ionizing rays offers, however, the possibility of using a packaging without perforations, because radiation inactivates microorganisms, so that spoilage and other undesirable conversions (e.g. Nitrate → Nitrite) are reduced. Optimal maintenance of the quality is achieved by the combination of packaging and irradiation. (orig.)

Emergency response packaging: A conceptual outline

International Nuclear Information System (INIS)

Luna, R.E.; McClure, J.D.; Bennett, P.C.; Wheeler, T.A.

1991-01-01

The main thrust of this paper has been to put forth the idea of developing a package for the recovery and retrieval of released radioactive material contents from Radioactive Materials (RAM) packaging involved in transport accidents. Prior to the development of such a package, some additional studies might be performed which would confirm the general type of candidate materials which might have to be recovered. This would require a detailed inventory of US packages that have released their contents due to transport accidents. The main issue is one of preparedness which would allow the US Department of Energy to respond to accidents for DOE shipments and to respond nationally for shipments outside the normal jurisdiction of US DOE shipments

7 CFR 58.53 - Supervisor of packaging required.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Supervisor of packaging required. 58.53 Section 58.53... Packaging Products with Official Identification § 58.53 Supervisor of packaging required. The official....54 through 58.57, shall be done only under the supervision of a supervisor of packaging. The...

7 CFR 58.229 - Filler and packaging equipment.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Filler and packaging equipment. 58.229 Section 58.229....229 Filler and packaging equipment. All filling and packaging equipment shall be of sanitary... equipment should comply with the 3-A Sanitary Standards for equipment for Packaging Dry Milk and Dry Milk...

Ensuring socially responsible packaging design

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...

IFT Scientific Status Summary 2008: Innovative Food Packaging Solutions

Science.gov (United States)

Food and beverage packaging comprises 55-65% of the $110 billion value of packaging in the United States. This review provides a summary of innovative technology developments in food packaging. The expanded role of food and beverage packaging is reviewed. Active and intelligent food packaging, ba...

Review of DOE waste package program. Subtask 1.1. National waste package program, April-September 1982

International Nuclear Information System (INIS)

Soo, P.

1983-03-01

The current effort is part of an ongoing task to evaluate the national high-level waste package effort. It includes evaluations of reference waste form, container, and packing material components with respect to determining how they may contribute to the containment and controlled release of radionuclides after waste packages have been emplaced in salt and basalt repositories. Chemical and mechanical failure/degradation modes for the waste package have been reviewed and the licensing data requirements to demonstrate compliance with NRC performance objectives specified

Traffic Light Protocol for Induced Seismicity: What is the Best Strategy?

Science.gov (United States)

Kao, H.; Mahani, A. B.; Atkinson, G. M.; Eaton, D. W. S.; Maxwell, S.

2015-12-01

In response to the occurrence of relatively large (and felt) earthquakes that are potentially induced by man-made activities, there is an increasing trend for the industry and government regulators to include a "traffic light" system in their decision-making process. Despite its tremendous implications to the cost of operations and the protection of public safety, the protocol that defines the different scenarios for different lights ("green", "yellow", or "red") has not been thoroughly validated to truly reflect the associated seismic risk. Most government regulators adopt a traffic light protocol (TLP) that depends on the magnitude of the earthquake of interest and sometimes felt reports from local communities. It is well known that the estimate of an earthquake's magnitude can have some uncertainty. While an uncertainty of +/-0.2 in magnitude is understandable and generally accepted by the seismological community, it can create a serious problem when the value of magnitude is the predominant factor in the TLP for induced seismicity. Recent examples of magnitude 4 and larger earthquakes in northeast BC and western AB that are possibly induced by shale gas hydraulic fracturing have demonstrated vividly the possible deficiency of existing TLP for induced seismicity. From the viewpoint of mitigating seismic risk, we argue that a ground-motion based TLP should be more effective than a magnitude-based approach. A workshop with representatives from government agencies, the industry, and the academia will be held to review the deficiency of the current TLP for induced seismicity and to explore innovative ways of improvement. The ultimate goal of the TLP for induced seismicity is to reach a balance between the protection of public safety and the economic benefit of developing natural resources In this presentation, main conclusions of this workshop will be presented.

Relationship between adiponectin, leptin, IGF-1 and total lipid peroxides plasma concentrations in patients with systemic sclerosis: possible role in disease development.

Science.gov (United States)

Winsz-Szczotka, Katarzyna; Kuźnik-Trocha, Kornelia; Komosińska-Vassev, Katarzyna; Kucharz, Eugeniusz; Kotulska, Anna; Olczyk, Krystyna

2016-07-01

The relationship between adiponectin, leptin, insulin-like growth factor-1 (IGF-1) and total lipid peroxide (TLP) concentrations, and its possible role in the development of diffuse cutaneous systemic sclerosis (dcSSc), were evaluated in this study. Plasma adipokines and IGF-1 levels were determined using the enzyme-linked immunosorbent assay method, whereas TLP levels were determined using a photometric test, in 36 dcSSc patients and 40 healthy controls matched by age, sex and body mass index (BMI). Plasma levels of adipokines were significantly lowered, while TLP and IGF-1 were increased in dcSSc patients compared to controls. Adiponectin correlated significantly with leptin (r = 0.44), TLP (r = -0.54), CRP (r = -0.47), erythrocyte sedimentation rate (ESR) (r = -0.40) and duration of disease (r = -0.44). A significant relationship was found between leptinemia and IGF-1 (r = -0.40), TLP (r = 0.44), duration of disease (r = -0.38) and BMI (r = 0.65). TLP correlated with IGF-1 (r = -0.43), C-reactive protein (r = 0.47), ESR (r = 0.49) and duration of disease (r = 0.46), while IGF-1 correlated with ESR (r = -0.40). Adipose tissue may play a complex role in the development of dcSSc, affecting both the metabolic state of the organism, as well as free radical-induced connective tissue degradation. Although, leptin seems to exert a pro-oxidative effect and both adiponectin and IGF-1 appear to prevent free radical damage, confirmation of the above effects requires further research. © 2014 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Annual Symposium in Electronics Packaging

CERN Document Server

1991-01-01

Each May, the Continuing Education Division of the T.J.Watson School of Engineering, Applied Science and Technology at the State University of New York at Binghamton sponsors an Annual Symposium in Electronics Packaging in cooperation with local professional societies (IEEE, ASME, SME, IEPS) and UnlPEG (the University-Industry Partnership for Economic Growth.) Each volume of this Electronics Packaging Forum series is based on the the preceding Symposium, with Volume Two based on the 1990 presentations. The Preface to Volume One included a brief definition of the broad scope of the electronics packaging field with some comments on why it has recently assumed such a more prominent priority for research and development. Those remarks will not be repeated here; at this point it is assumed that the reader is a professional in the packaging field, or possibly a student of one of the many academic disciplines which contribute to it. It is worthwhile repeating the series objectives, however, so the reader will be cle...

Developing, implementing and evaluating a simulation learning ...

African Journals Online (AJOL)

Hafaza Bibi Amod

Research significance: To develop a simulation learning package that uses high fidelity simulation to ... common cause of maternal mortality in South Africa and ... Framework cited by Jeffries (2007). ... nario development toolkits and various best practice guide- ..... analysis in nursing research: Concepts, procedures, and.

Safety analysis report for packaging: the ORNL DOT Specification 20WC-5 - special form packaging

International Nuclear Information System (INIS)

Schaich, R.W.

1982-10-01

The ORNL DOT Specification 20WC-5 - Special Form Package was fabricated for the transport of large quantities of solid nonfissile radioactive materials in special form. The package was evaluated on the basis of tests performed at Sandia National Laboratories, Albuquerque, New Mexico on an identical fire and impact shield and special form tests performed on a variety of stainless steel capsules at ORNL by Operations Division personnel. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of large quantities of nonfissile radioactive materials in special form

Development of fresh fuel packaging for ATR demonstration reactor

International Nuclear Information System (INIS)

Kurakami, J.; Kurita, I.

1993-01-01

Related to development of the demonstration advanced thermal reactor, it is necessary and important to develop transport packaging which is used for transporting fresh fuel assemblies. Therefore, the packaging is now being developed in Power Reactor and Nuclear Fuel Development Corporation (PNC). Currently, PNC is fabricating two prototype packagings based on the final design, and land cruising and vibration tests, handling performance tests and prototype packaging tests will be executed with prototype packagings in order to experimentally confirm the soundness of packaging and its contents and the propriety of design technique. This paper describes the summary of general specifications and structures of this packaging and the summary of preliminary safety analysis of package. (J.P.N.)

9 CFR 112.6 - Packaging biological products.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Packaging biological products. 112.6... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS PACKAGING AND LABELING § 112.6 Packaging biological products. (a) Each multiple-dose final container of a biological product...

49 CFR 178.503 - Marking of packagings.

Science.gov (United States)

2010-10-01

...) A letter identifying the performance standard under which the packaging design type has been... tests; (4) A designation of the specific gravity or mass for which the packaging design type has been... of the hydrostatic pressure test that the packaging design type has successfully passed; (ii) For...

Application of active packaging systems in probiotic foods

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2013-09-01

Full Text Available Background: The packaging of the product has an important role in the protection of the stability of the final product. The use of active packaging system is due to play an increasingly important role by offering numerous and innovative solutions for extending the shelf-life or improve food quality and safety. Methods: On the basis of broad review of the current state of the art in world literature, application of packaging systems in probiotics foods was discussed. Results: In this study presented research and development in packaging systems for probiotics foods, using suitable materials with combine passive with active packaging solutions. Conclusion: Active packages with incorporated oxygen barrier materials or films with selective permeability properties also have potential applications in the packaging of probiotic food products. This is a broad field of research for scientists and industry.

Time temperature indicators as devices intelligent packaging

Directory of Open Access Journals (Sweden)

Adriana Pavelková

2013-01-01

Full Text Available Food packaging is an important part of food production. Temperature is a one of crucial factor which affecting the quality and safety of food products during distribution, transport and storage. The one way of control of food quality and safety is the application of new packaging systems, which also include the intelligent or smart packaging. Intelligent packaging is a packaging system using different indicators for monitoring the conditions of production, but in particular the conditions during transport and storage. Among these indicators include the time-temperature indicators to monitor changes in temperature, which is exposed the product and to inform consumers about the potential risks associated with consumption of these products. Time temperature indicators are devices that show an irreversible change in a physical characteristic, usually color or shape, in response to temperature history. Some are designed to monitor the evolution of temperature with time along the distribution chain and others are designed to be used in the consumer packages.

NFR TRIGA package design review report

International Nuclear Information System (INIS)

Clements, M.D.

1994-01-01

The purpose of this document is to compile, present and document the formal design review of the NRF TRIGA packaging. The contents of this document include: the briefing meeting presentations, package description, design calculations, package review drawings, meeting minutes, action item lists, review comment records, final resolutions, and released drawings. This design review required more than two meeting to resolve comments. Therefore, there are three meeting minutes and two action item lists

Large transport packages for decommissioning waste

International Nuclear Information System (INIS)

Price, M.S.T.

1988-03-01

The main tasks performed during the period related to the influence of manufacture, transport and disposal on the design of such packages. It is deduced that decommissioning wastes will be transported under the IAEA Transport Regulations under either the Type B or Low Specific Activity (LSA) categories. If the LSA packages are self-shielded, reinforced concrete is the preferred material of construction. But the high cost of disposal implies that there is a strong reason to investigate the use of returnable shields for LSA packages and in such cases they are likely to be made of ferrous metal. Economic considerations favour the use of spheroidal graphite cast iron for this purpose. Transport operating hazards have been investigated using a mixture of desk studies, routes surveys and operations data from the railway organisations. Reference routes were chosen in the Federal Republic of Germany, France and the United Kingdom. This work has led to a description of ten accident scenarios and an evaluation of the associated accident probabilities. The effect of disposal on design of packages has been assessed in terms of the radiological impact of decommissioning wastes, an in addition corrosion and gas evolution have been examined. The inventory of radionuclides in a decommissioning waste package has low environmental impact. If metal clad reinforced concrete packages are to be used, the amount of gas evolution is such that a vent would need to be included in the design. Similar unclad packages would be sufficiently permeable to gases to prevent a pressure build-up. (author)

Flexible packaging for PV modules

Science.gov (United States)

Dhere, Neelkanth G.

2008-08-01

Economic, flexible packages that provide needed level of protection to organic and some other PV cells over >25-years have not yet been developed. However, flexible packaging is essential in niche large-scale applications. Typical configuration used in flexible photovoltaic (PV) module packaging is transparent frontsheet/encapsulant/PV cells/flexible substrate. Besides flexibility of various components, the solder bonds should also be flexible and resistant to fatigue due to cyclic loading. Flexible front sheets should provide optical transparency, mechanical protection, scratch resistance, dielectric isolation, water resistance, UV stability and adhesion to encapsulant. Examples are Tefzel, Tedlar and Silicone. Dirt can get embedded in soft layers such as silicone and obscure light. Water vapor transmittance rate (WVTR) of polymer films used in the food packaging industry as moisture barriers are ~0.05 g/(m2.day) under ambient conditions. In comparison, light emitting diodes employ packaging components that have WVTR of ~10-6 g/(m2.day). WVTR of polymer sheets can be improved by coating them with dense inorganic/organic multilayers. Ethylene vinyl acetate, an amorphous copolymer used predominantly by the PV industry has very high O2 and H2O diffusivity. Quaternary carbon chains (such as acetate) in a polymer lead to cleavage and loss of adhesional strength at relatively low exposures. Reactivity of PV module components increases in presence of O2 and H2O. Adhesional strength degrades due to the breakdown of structure of polymer by reactive, free radicals formed by high-energy radiation. Free radical formation in polymers is reduced when the aromatic rings are attached at regular intervals. This paper will review flexible packaging for PV modules.

Hermeticity testing of MEMS and microelectronic packages

CERN Document Server

Costello, Suzanne

2013-01-01

Packaging of microelectronics has been developing since the invention of the transistor in 1947. With the increasing complexity and decreasing size of the die, packaging requirements have continued to change. A step change in package requirements came with the introduction of the Micro-Electro-Mechanical System (MEMS) whereby interactions with the external environment are, in some cases, required.This resource is a rapid, definitive reference on hermetic packaging for the MEMS and microelectronics industry, giving practical guidance on traditional and newly developed test methods. This book in

Future Perspective : Design Process of Perfume Packaging

OpenAIRE

Anderson, Duncan

2016-01-01

In a world where technology develops at a rapid speed a packaging designer should have the ability to adapt to the challenges in a world where the packaging landscape might look far more different from today. This thesis will look at possible future scenarios relating to resources, infrastructure and consumer behaviour in the year 2050. It will then go on to discuss the emergence of new packaging materials pitted to replace plastic, as well as take a look at printed electronics in packaging a...

actuar: An R Package for Actuarial Science

Directory of Open Access Journals (Sweden)

Christophe Dutang

2008-02-01

Full Text Available actuar is a package providing additional Actuarial Science functionality to the R statistical system. The project was launched in 2005 and the package is available on the Comprehensive R Archive Network since February 2006. The current version of the package contains functions for use in the fields of loss distributions modeling, risk theory (including ruin theory, simulation of compound hierarchical models and credibility theory. This paper presents in detail but with few technical terms the most recent version of the package.

Welding robot package; Arc yosetsu robot package

Energy Technology Data Exchange (ETDEWEB)

Nishikawa, S. [Yaskawa Electric Corp., Kitakyushu (Japan)

1998-09-01

For the conventional high-speed welding robot, the welding current was controlled mainly for reducing the spatters during short circuits and for stabilizing the beads by the periodic short circuits. However, an increase of deposition amount in response to the speed is required for the high-speed welding. Large-current low-spatter welding current region control was added. Units were integrated into a package by which the arc length is kept in short without dispersion of arc length for welding without defects such as undercut and unequal beads. In automobile industry, use of aluminum parts is extended for the light weight. The welding is very difficult, and automation is not so progressing in spite of the poor environment. Buckling of welding wire is easy to occur, and supply of wire is obstructed by the deposition of chipped powders on the torch cable, which stay within the contact chip resulting in the deposition. Dislocation of locus is easy to occur at the corner of rectangular pipe during the welding. By improving these troubles, an aluminum MIG welding robot package has been developed. 13 figs.

Online Learning for Mobile Technology Applications in Health Surveys

International Development Research Centre (IDRC) Digital Library (Canada)

Online Learning for Mobile Technology Applications in Health Surveys. In light of ... to develop a globally accessible asynchronous Internet-based training packaged backed by a real-time coaching service. Project ID. 105932. Project status.

Radiation treatment for sterilization of packaging materials

International Nuclear Information System (INIS)

Haji-Saeid, Mohammad; Sampa, Maria Helena O.; Chmielewski, Andrzej G.

2007-01-01

Treatment with gamma and electron radiation is becoming a common process for the sterilization of packages, mostly made of natural or synthetic plastics, used in the aseptic processing of foods and pharmaceuticals. The effect of irradiation on these materials is crucial for packaging engineering to understand the effects of these new treatments. Packaging material may be irradiated either prior to or after filling. The irradiation prior to filling is usually chosen for dairy products, processed food, beverages, pharmaceutical, and medical device industries in the United States, Europe, and Canada. Radiation effects on packaging material properties still need further investigation. This paper summarizes the work done by different groups and discusses recent developments in regulations and testing procedures in the field of packaging technology

An Innovative Improvement of Engineering Learning System Using Computational Fluid Dynamics Concept

Science.gov (United States)

Hung, T. C.; Wang, S. K.; Tai, S. W.; Hung, C. T.

2007-01-01

An innovative concept of an electronic learning system has been established in an attempt to achieve a technology that provides engineering students with an instructive and affordable framework for learning engineering-related courses. This system utilizes an existing Computational Fluid Dynamics (CFD) package, Active Server Pages programming,…

Destructive testing of transport packaging. Quality assurance applied to transport packaging in the USA

International Nuclear Information System (INIS)

Barker, R.F.

1976-01-01

This paper discusses several aspects of quality assurance as applied to packaging, including such requirements for an adequate quality assurance program as assignment of responsibilities, inspections, and audits. In certain cases, we have determined the margin of safety inherent in specific package designs. Testing of packaging to destruction, by subjecting it to conditions far beyond the present accident criteria, was carried out to establish the levels of impact, puncture, crush, and fire at which present designs would fail. A second area in which the Nuclear Regulatory Commission has applied quality assurance is qualification testing. The standards for testing prototypes require essentially no loss of contents under the specified accident test conditions. Qualifying a design with an acceptable degree of reliability by testing it at the specified stress levels with no measurable effect requires large numbers of samples to be tested. Testing the prototype under conditions well above the criteria is shown to offer one of the most effective means of demonstrating the adequacy of a design. Scenario tests, i.e., staged accidents or full-scale tests in which vehicles with samples of packages on board are crashed under specified conditions, in most cases present singular points on a curve. One-point tests in most cases will disprove a package design if it fails but may not confirm that a design will not fail. At the same time, much information and some public assurances can be obtained from such tests. (author)

Using reusable learning objects (rlos) in injection skills teaching: Evaluations from multiple user types.

Science.gov (United States)

Williams, Julia; O'Connor, Mórna; Windle, Richard; Wharrad, Heather J

2015-12-01

Clinical skills are a critical component of pre-registration nurse education in the United Kingdom, yet there is widespread concern about the clinical skills displayed by newly-qualified nurses. Novel means of supporting clinical skills education are required to address this. A package of Reusable Learning Objects (RLOs) was developed to supplement pre-registration teaching on the clinical skill of administering injection medication. RLOs are electronic resources addressing a single learning objective whose interactivity facilitates learning. This article evaluates a package of five injection RLOs across three studies: (1) questionnaires administered to pre-registration nursing students at University of Nottingham (UoN) (n=46) evaluating the RLO package as a whole; (2) individual RLOs evaluated in online questionnaires by educators and students from UoN; from other national and international institutions; and healthcare professionals (n=265); (3) qualitative evaluation of the RLO package by UoN injection skills tutors (n=6). Data from all studies were assessed for (1) access to, (2) usefulness, (3) impact and (4) integration of the RLOs. Study one found that pre-registration nursing students rate the RLO package highly across all categories, particularly underscoring the value of their self-test elements. Study two found high ratings in online assessments of individual RLOs by multiple users. The global reach is particularly encouraging here. Tutors reported insufficient levels of student-RLO access, which might be explained by the timing of their student exposure. Tutors integrate RLOs into teaching and agree on their use as teaching supplements, not substitutes for face-to-face education. This evaluation encompasses the first years postpackage release. Encouraging data on evaluative categories in this early review suggest that future evaluations are warranted to track progress as the package is adopted and evaluated more widely. Copyright © 2015 Elsevier Ltd

Chemical changes in food packaging resulting from ionizing irradiation

International Nuclear Information System (INIS)