WorldWideScience

Sample records for learned 2d engineer

  1. Engineering light outcoupling in 2D materials

    KAUST Repository

    Lien, Derhsien

    2015-02-11

    When light is incident on 2D transition metal dichalcogenides (TMDCs), it engages in multiple reflections within underlying substrates, producing interferences that lead to enhancement or attenuation of the incoming and outgoing strength of light. Here, we report a simple method to engineer the light outcoupling in semiconducting TMDCs by modulating their dielectric surroundings. We show that by modulating the thicknesses of underlying substrates and capping layers, the interference caused by substrate can significantly enhance the light absorption and emission of WSe2, resulting in a ∼11 times increase in Raman signal and a ∼30 times increase in the photoluminescence (PL) intensity of WSe2. On the basis of the interference model, we also propose a strategy to control the photonic and optoelectronic properties of thin-layer WSe2. This work demonstrates the utilization of outcoupling engineering in 2D materials and offers a new route toward the realization of novel optoelectronic devices, such as 2D LEDs and solar cells.

  2. Engineering light outcoupling in 2D materials

    KAUST Repository

    Lien, Derhsien; Kang, Jeongseuk; Amani, Matin; Chen, Kevin; Tosun, Mahmut; Wang, Hsinping; Roy, Tania; Eggleston, Michael S.; Wu, Ming C.; Dubey, Madan; Lee, Sichen; He, Jr-Hau; Javey, Ali

    2015-01-01

    When light is incident on 2D transition metal dichalcogenides (TMDCs), it engages in multiple reflections within underlying substrates, producing interferences that lead to enhancement or attenuation of the incoming and outgoing strength of light. Here, we report a simple method to engineer the light outcoupling in semiconducting TMDCs by modulating their dielectric surroundings. We show that by modulating the thicknesses of underlying substrates and capping layers, the interference caused by substrate can significantly enhance the light absorption and emission of WSe2, resulting in a ∼11 times increase in Raman signal and a ∼30 times increase in the photoluminescence (PL) intensity of WSe2. On the basis of the interference model, we also propose a strategy to control the photonic and optoelectronic properties of thin-layer WSe2. This work demonstrates the utilization of outcoupling engineering in 2D materials and offers a new route toward the realization of novel optoelectronic devices, such as 2D LEDs and solar cells.

  3. 2dF mechanical engineering

    Science.gov (United States)

    Smith, Greg; Lankshear, Allan

    1998-07-01

    2dF is a multi-object instrument mounted at prime focus at the AAT capable of spectroscopic analysis of 400 objects in a single 2 degree field. It also prepares a second 2 degree 400 object field while the first field is being observed. At its heart is a high precision robotic positioner that places individual fiber end magnetic buttons on one of two field plates. The button gripper is carried on orthogonal gantries powered by linear synchronous motors and contains a TV camera which precisely locates backlit buttons to allow placement in user defined locations to 10 (mu) accuracy. Fiducial points on both plates can also be observed by the camera to allow repeated checks on positioning accuracy. Field plates rotate to follow apparent sky rotation. The spectrographs both analyze light from the 200 observing fibers each and back- illuminate the 400 fibers being re-positioned during the observing run. The 2dF fiber position and spectrograph system is a large and complex instrument located at the prime focus of the Anglo Australian Telescope. The mechanical design has departed somewhat from the earlier concepts of Gray et al, but still reflects the audacity of those first ideas. The positioner is capable of positioning 400 fibers on a field plate while another 400 fibers on another plate are observing at the focus of the telescope and feeding the twin spectrographs. When first proposed it must have seemed like ingenuity unfettered by caution. Yet now it works, and works wonderfully well. 2dF is a system which functions as the result of the combined and coordinated efforts of the astronomers, the mechanical designers and tradespeople, the electronic designers, the programmers, the support staff at the telescope, and the manufacturing subcontractors. The mechanical design of the 2dF positioner and spectrographs was carried out by the mechanical engineering staff of the AAO and the majority of the manufacture was carried out in the AAO workshops.

  4. Learn Unity for 2D game development

    CERN Document Server

    Thorn, Alan

    2013-01-01

    The only Unity book specifically covering 2D game development Written by Alan Thorn, experience game developer and author of seven books on game programming Hands-on examples of all major aspects of 2D game development using Unity

  5. 2D modelling and its applications in engineering

    International Nuclear Information System (INIS)

    Altinbalik, M. Tahir; İRSEL, Gürkan

    2013-01-01

    A model, in computer aided engineering applications, may be created by either using a two- dimensional or a three-dimensional design depending on the purpose of design. What matters most in this regard is the selection of a right method to meet system solution requirements in the most economical way. Manufacturability of a design that is developed by utilising computer aided engineering is important, but usability of the data obtained in the course of design works in the production is also equally important. In the applications consisting of such production operations as CNC or plasma cutting, two-dimensional designs can be directly used in production. These machines are equipped with interfaces which converts two-dimensional drawings into codes. In this way, a design can be directly transferred to production, and any arrangements during production process can be synchronously evaluated. As a result of this, investment expenses will be lowered, and thus the costs can be reduced to some extent. In the presented study, we have studied two-dimensional design applications and requirements. We created a two-dimensional design for a part for which a three-dimensional model have previously been generated, and then, we transferred this design to plasma cutting machine, and thus, the operation has been realized experimentally. Key words: Plasma Cutting, 2D modelling, flexibility

  6. 2D modelling and its applications in engineering

    Energy Technology Data Exchange (ETDEWEB)

    Altinbalik, M. Tahir; İRSEL, Gürkan [Trakya University, Faculty of Engineering and Architecture Mechanical Engineering Department, Edİrne (Turkey)

    2013-07-01

    A model, in computer aided engineering applications, may be created by either using a two- dimensional or a three-dimensional design depending on the purpose of design. What matters most in this regard is the selection of a right method to meet system solution requirements in the most economical way. Manufacturability of a design that is developed by utilising computer aided engineering is important, but usability of the data obtained in the course of design works in the production is also equally important. In the applications consisting of such production operations as CNC or plasma cutting, two-dimensional designs can be directly used in production. These machines are equipped with interfaces which converts two-dimensional drawings into codes. In this way, a design can be directly transferred to production, and any arrangements during production process can be synchronously evaluated. As a result of this, investment expenses will be lowered, and thus the costs can be reduced to some extent. In the presented study, we have studied two-dimensional design applications and requirements. We created a two-dimensional design for a part for which a three-dimensional model have previously been generated, and then, we transferred this design to plasma cutting machine, and thus, the operation has been realized experimentally. Key words: Plasma Cutting, 2D modelling, flexibility.

  7. A new 2-d approach to iterative , learning control system

    International Nuclear Information System (INIS)

    Ashraf, S.; Muhammad, E.; Tasleem, M.

    2004-01-01

    The well known two-dimensional system theory is used to analyze and develop a class of learning control system. In this paper we first explore and test a method given by ZHENG and JAMSHIDI. In that paper all the input samples are treated at once. In comparison our paper presents a scheme in which one sample at a time is treated. The 2- D state-space model of proposed learning control scheme is given. An important consequence of the proposed scheme is that given the right choice of gain matrix and sampling time the system's output can be made to converge to any degree of accuracy. (author)

  8. 76 FR 30819 - Special Conditions: Turbomeca Arriel 2D Turboshaft Engine

    Science.gov (United States)

    2011-05-27

    ... Conditions No. 33-009-SC] Special Conditions: Turbomeca Arriel 2D Turboshaft Engine AGENCY: Federal Aviation... Turbomeca SA model Arriel 2D engines. The engine model will have a novel or unusual design feature which is... contact Marc Bouthillier, ANE-111, Engine and Propeller Directorate, Aircraft Certification Service, 12...

  9. Photonic band gap engineering in 2D photonic crystals

    Indian Academy of Sciences (India)

    Department of Applied Physics, Delhi College of Engineering, Faculty of Technology. (University of ... Photonic crystal; photonic band gap; plane-wave expansion method. PACS Nos 71.20 .... Numerical analysis and results. To obtain the ...

  10. Quantum engineering of transistors based on 2D materials heterostructures

    Science.gov (United States)

    Iannaccone, Giuseppe; Bonaccorso, Francesco; Colombo, Luigi; Fiori, Gianluca

    2018-03-01

    Quantum engineering entails atom-by-atom design and fabrication of electronic devices. This innovative technology that unifies materials science and device engineering has been fostered by the recent progress in the fabrication of vertical and lateral heterostructures of two-dimensional materials and by the assessment of the technology potential via computational nanotechnology. But how close are we to the possibility of the practical realization of next-generation atomically thin transistors? In this Perspective, we analyse the outlook and the challenges of quantum-engineered transistors using heterostructures of two-dimensional materials against the benchmark of silicon technology and its foreseeable evolution in terms of potential performance and manufacturability. Transistors based on lateral heterostructures emerge as the most promising option from a performance point of view, even if heterostructure formation and control are in the initial technology development stage.

  11. Quantum engineering of transistors based on 2D materials heterostructures.

    Science.gov (United States)

    Iannaccone, Giuseppe; Bonaccorso, Francesco; Colombo, Luigi; Fiori, Gianluca

    2018-03-01

    Quantum engineering entails atom-by-atom design and fabrication of electronic devices. This innovative technology that unifies materials science and device engineering has been fostered by the recent progress in the fabrication of vertical and lateral heterostructures of two-dimensional materials and by the assessment of the technology potential via computational nanotechnology. But how close are we to the possibility of the practical realization of next-generation atomically thin transistors? In this Perspective, we analyse the outlook and the challenges of quantum-engineered transistors using heterostructures of two-dimensional materials against the benchmark of silicon technology and its foreseeable evolution in terms of potential performance and manufacturability. Transistors based on lateral heterostructures emerge as the most promising option from a performance point of view, even if heterostructure formation and control are in the initial technology development stage.

  12. The Implementation of C-ID, R2D2 Model on Learning Reading Comprehension

    Science.gov (United States)

    Rayanto, Yudi Hari; Rusmawan, Putu Ngurah

    2016-01-01

    The purposes of this research are to find out, (1) whether C-ID, R2D2 model is effective to be implemented on learning Reading comprehension, (2) college students' activity during the implementation of C-ID, R2D2 model on learning Reading comprehension, and 3) college students' learning achievement during the implementation of C-ID, R2D2 model on…

  13. Learning and generalization errors for the 2D binary perceptron

    NARCIS (Netherlands)

    Klymovskiy, A.

    2005-01-01

    The statistical mechanics model of the binary perceptron learning is considered. It is proved that under the regularity conditions learning and generalization errors for the binary perceptron with two inputs tend to 0 at the average; the first term of the asymptotics is provided; its behavior with

  14. Learning from graphically integrated 2D and 3D representations improves retention of neuroanatomy

    Science.gov (United States)

    Naaz, Farah

    Visualizations in the form of computer-based learning environments are highly encouraged in science education, especially for teaching spatial material. Some spatial material, such as sectional neuroanatomy, is very challenging to learn. It involves learning the two dimensional (2D) representations that are sampled from the three dimensional (3D) object. In this study, a computer-based learning environment was used to explore the hypothesis that learning sectional neuroanatomy from a graphically integrated 2D and 3D representation will lead to better learning outcomes than learning from a sequential presentation. The integrated representation explicitly demonstrates the 2D-3D transformation and should lead to effective learning. This study was conducted using a computer graphical model of the human brain. There were two learning groups: Whole then Sections, and Integrated 2D3D. Both groups learned whole anatomy (3D neuroanatomy) before learning sectional anatomy (2D neuroanatomy). The Whole then Sections group then learned sectional anatomy using 2D representations only. The Integrated 2D3D group learned sectional anatomy from a graphically integrated 3D and 2D model. A set of tests for generalization of knowledge to interpreting biomedical images was conducted immediately after learning was completed. The order of presentation of the tests of generalization of knowledge was counterbalanced across participants to explore a secondary hypothesis of the study: preparation for future learning. If the computer-based instruction programs used in this study are effective tools for teaching anatomy, the participants should continue learning neuroanatomy with exposure to new representations. A test of long-term retention of sectional anatomy was conducted 4-8 weeks after learning was completed. The Integrated 2D3D group was better than the Whole then Sections group in retaining knowledge of difficult instances of sectional anatomy after the retention interval. The benefit

  15. Quantum-Carnot engine for particle confined to 2D symmetric potential well

    International Nuclear Information System (INIS)

    Belfaqih, Idrus Husin; Sutantyo, Trengginas Eka Putra; Prayitno, T. B.; Sulaksono, Anto

    2015-01-01

    Carnot model of heat engine is the most efficient cycle consisting of isothermal and adiabatic processes which are reversible. Although ideal gas usually used as a working fluid in the Carnot engine, Bender used quantum particle confined in 1D potential well as a working fluid. In this paper, by following Bender we generalize the situation to 2D symmetric potential well. The efficiency is express as the ratio of the initial length of the system to the final length of the compressed system. The result then is shown that for the same ratio, 2D potential well is more efficient than 1D potential well

  16. Quantum-Carnot engine for particle confined to 2D symmetric potential well

    Energy Technology Data Exchange (ETDEWEB)

    Belfaqih, Idrus Husin, E-mail: idrushusin21@gmail.com; Sutantyo, Trengginas Eka Putra, E-mail: trengginas.eka@gmail.com; Prayitno, T. B., E-mail: teguh-budi@unj.ac.id [Department of Physics, Universitas Negeri Jakarta, Jl. Pemuda Rawamangun, Jakarta Timur, 13220 (Indonesia); Sulaksono, Anto, E-mail: anto.sulaksono@sci.ui.ac.id [Department of Physics, Universitas Indonesia, Depok, Jawa Barat, 164242 (Indonesia)

    2015-09-30

    Carnot model of heat engine is the most efficient cycle consisting of isothermal and adiabatic processes which are reversible. Although ideal gas usually used as a working fluid in the Carnot engine, Bender used quantum particle confined in 1D potential well as a working fluid. In this paper, by following Bender we generalize the situation to 2D symmetric potential well. The efficiency is express as the ratio of the initial length of the system to the final length of the compressed system. The result then is shown that for the same ratio, 2D potential well is more efficient than 1D potential well.

  17. Strategy2D: Turn-based Strategy Video Game Engine for Mobile Devices

    OpenAIRE

    Calvo Villazón, Javier

    2014-01-01

    Multi-platform video game engine for the development of turn-based strategy games for mobile devices. Developed in C++ within the Cocos2d-x framework, It provides a scalable and configurable tool for the creation of this type of games.

  18. 2D temperature field measurement in a direct-injection engine using LIF technology

    Science.gov (United States)

    Liu, Yongfeng; Tian, Hongsen; Yang, Jianwei; Sun, Jianmin; Zhu, Aihua

    2011-12-01

    A new multi-spectral detection strategy for temperature laser- induced- fluorescence (LIF) 2-D imaging measurements is reported for high pressure flames in high-speed diesel engine. Schematic of the experimental set-up is outlined and the experimental data on the diesel engine is summarized. Experiment injection system is a third generation Bosch high-pressure common rail featuring a maximum pressure of 160MPa. The injector is equipped with a six-hole nozzle, where each hole has a diameter of 0.124 mm. and slightly offset to the center of the cylinder axis to allow a better cooling of the narrow bridge between the exhaust valves. The measurement system includes a blower, which supplied the intake flow rate, and a prototype single-valve direct injection diesel engine head modified to lay down the swirled-type injector. 14-bit digital CCD cameras are employed to achieve a greater level of accuracy in comparison to the results of previous measurements. The temperature field spatial distributions in the cylinder for different crank angle degrees are carried out in a single direct-injection diesel engine.

  19. Transfer of learning between 2D and 3D sources during infancy: Informing theory and practice.

    Science.gov (United States)

    Barr, Rachel

    2010-06-01

    The ability to transfer learning across contexts is an adaptive skill that develops rapidly during early childhood. Learning from television is a specific instance of transfer of learning between a 2-Dimensional (2D) representation and a 3-Dimensional (3D) object. Understanding the conditions under which young children might accomplish this particular kind of transfer is important because by 2 years of age 90% of US children are viewing television on a daily basis. Recent research shows that children can imitate actions presented on television using the corresponding real-world objects, but this same research also shows that children learn less from television than they do from live demonstrations until they are at least 3 years old; termed the video deficit effect. At present, there is no coherent theory to account for the video deficit effect; how learning is disrupted by this change in context is poorly understood. The aims of the present review are (1) to review the conditions under which children transfer learning between 2D images and 3D objects during early childhood, and (2) to integrate developmental theories of memory processing into the transfer of learning from media literature using Hayne's (2004) developmental representational flexibility account. The review will conclude that studies on the transfer of learning between 2D and 3D sources have important theoretical implications for general developmental theories of cognitive development, and in particular the development of a flexible representational system, as well as policy implications for early education regarding the potential use and limitations of media as effective teaching tools during early childhood.

  20. One-Year stable perovskite solar cells by 2D/3D interface engineering

    Science.gov (United States)

    Grancini, G.; Roldán-Carmona, C.; Zimmermann, I.; Mosconi, E.; Lee, X.; Martineau, D.; Narbey, S.; Oswald, F.; de Angelis, F.; Graetzel, M.; Nazeeruddin, Mohammad Khaja

    2017-06-01

    Despite the impressive photovoltaic performances with power conversion efficiency beyond 22%, perovskite solar cells are poorly stable under operation, failing by far the market requirements. Various technological approaches have been proposed to overcome the instability problem, which, while delivering appreciable incremental improvements, are still far from a market-proof solution. Here we show one-year stable perovskite devices by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. The 2D/3D forms an exceptional gradually-organized multi-dimensional interface that yields up to 12.9% efficiency in a carbon-based architecture, and 14.6% in standard mesoporous solar cells. To demonstrate the up-scale potential of our technology, we fabricate 10 × 10 cm2 solar modules by a fully printable industrial-scale process, delivering 11.2% efficiency stable for >10,000 h with zero loss in performances measured under controlled standard conditions. This innovative stable and low-cost architecture will enable the timely commercialization of perovskite solar cells.

  1. Comparing 2D and 3D Game-Based Learning Environments in Terms of Learning Gains and Student Perceptions

    Science.gov (United States)

    Ak, Oguz; Kutlu, Birgul

    2017-01-01

    The aim of this study was to investigate the effectiveness of traditional, 2D and 3D game-based environments assessed by student achievement scores and to reveal student perceptions of the value of these learning environments. A total of 60 university students from the Faculty of Education who were registered in three sections of a required…

  2. 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids.

    Science.gov (United States)

    Xu, Jixian; Voznyy, Oleksandr; Liu, Mengxia; Kirmani, Ahmad R; Walters, Grant; Munir, Rahim; Abdelsamie, Maged; Proppe, Andrew H; Sarkar, Amrita; García de Arquer, F Pelayo; Wei, Mingyang; Sun, Bin; Liu, Min; Ouellette, Olivier; Quintero-Bermudez, Rafael; Li, Jie; Fan, James; Quan, Lina; Todorovic, Petar; Tan, Hairen; Hoogland, Sjoerd; Kelley, Shana O; Stefik, Morgan; Amassian, Aram; Sargent, Edward H

    2018-04-23

    Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size 1,2 . Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon 3 . Advances in surface passivation 2,4-7 , combined with advances in device structures 8 , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 9 . Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to ~300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (J SC ) and open-circuit voltage (V OC ), as seen in previous reports 3,9-11 . Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses (~600 nm) and record values of J SC (32 mA cm -2 ) are fabricated. The V OC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.

  3. 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids

    KAUST Repository

    Xu, Jixian; Voznyy, Oleksandr; Liu, Mengxia; Kirmani, Ahmad R.; Walters, Grant; Munir, Rahim; Abdelsamie, Maged; Proppe, Andrew H.; Sarkar, Amrita; Garcí a de Arquer, F. Pelayo; Wei, Mingyang; Sun, Bin; Liu, Min; Ouellette, Olivier; Quintero-Bermudez, Rafael; Li, Jie; Fan, James; Quan, Li Na; Todorovic, Petar; Tan, Hairen; Hoogland, Sjoerd; Kelley, Shana O.; Stefik, Morgan; Amassian, Aram; Sargent, Edward H.

    2018-01-01

    Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size1,2. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon 3 . Advances in surface passivation2,4-7, combined with advances in device structures 8 , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 9 . Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to ~300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (JSC) and open-circuit voltage (VOC), as seen in previous reports3,9-11. Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses (~600 nm) and record values of JSC (32 mA cm-2) are fabricated. The VOC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.

  4. 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids

    KAUST Repository

    Xu, Jixian

    2018-04-20

    Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size1,2. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon 3 . Advances in surface passivation2,4-7, combined with advances in device structures 8 , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 9 . Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to ~300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (JSC) and open-circuit voltage (VOC), as seen in previous reports3,9-11. Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses (~600 nm) and record values of JSC (32 mA cm-2) are fabricated. The VOC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.

  5. 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids

    Science.gov (United States)

    Xu, Jixian; Voznyy, Oleksandr; Liu, Mengxia; Kirmani, Ahmad R.; Walters, Grant; Munir, Rahim; Abdelsamie, Maged; Proppe, Andrew H.; Sarkar, Amrita; García de Arquer, F. Pelayo; Wei, Mingyang; Sun, Bin; Liu, Min; Ouellette, Olivier; Quintero-Bermudez, Rafael; Li, Jie; Fan, James; Quan, Lina; Todorovic, Petar; Tan, Hairen; Hoogland, Sjoerd; Kelley, Shana O.; Stefik, Morgan; Amassian, Aram; Sargent, Edward H.

    2018-06-01

    Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size1,2. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon3. Advances in surface passivation2,4-7, combined with advances in device structures8, have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 20169. Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to 300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (JSC) and open-circuit voltage (VOC), as seen in previous reports3,9-11. Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses ( 600 nm) and record values of JSC (32 mA cm-2) are fabricated. The VOC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.

  6. The Effect of Stereoscopic ("3D") vs. 2D Presentation on Learning through Video and Film

    Science.gov (United States)

    Price, Aaron; Kasal, E.

    2014-01-01

    Two Eyes, 3D is a NSF-funded research project into the effects of stereoscopy on learning of highly spatial concepts. We report final results on one study of the project which tested the effect of stereoscopic presentation on learning outcomes of two short films about Type 1a supernovae and the morphology of the Milky Way. 986 adults watched either film, randomly distributed between stereoscopic and 2D presentation. They took a pre-test and post-test that included multiple choice and drawing tasks related to the spatial nature of the topics in the film. Orientation of the answering device was also tracked and a spatial cognition pre-test was given to control for prior spatial ability. Data collection took place at the Adler Planetarium's Space Visualization Lab and the project is run through the AAVSO.

  7. Automatic Depth Extraction from 2D Images Using a Cluster-Based Learning Framework.

    Science.gov (United States)

    Herrera, Jose L; Del-Blanco, Carlos R; Garcia, Narciso

    2018-07-01

    There has been a significant increase in the availability of 3D players and displays in the last years. Nonetheless, the amount of 3D content has not experimented an increment of such magnitude. To alleviate this problem, many algorithms for converting images and videos from 2D to 3D have been proposed. Here, we present an automatic learning-based 2D-3D image conversion approach, based on the key hypothesis that color images with similar structure likely present a similar depth structure. The presented algorithm estimates the depth of a color query image using the prior knowledge provided by a repository of color + depth images. The algorithm clusters this database attending to their structural similarity, and then creates a representative of each color-depth image cluster that will be used as prior depth map. The selection of the appropriate prior depth map corresponding to one given color query image is accomplished by comparing the structural similarity in the color domain between the query image and the database. The comparison is based on a K-Nearest Neighbor framework that uses a learning procedure to build an adaptive combination of image feature descriptors. The best correspondences determine the cluster, and in turn the associated prior depth map. Finally, this prior estimation is enhanced through a segmentation-guided filtering that obtains the final depth map estimation. This approach has been tested using two publicly available databases, and compared with several state-of-the-art algorithms in order to prove its efficiency.

  8. Modulation of Metal and Insulator States in 2D Ferromagnetic VS2 by van der Waals Interaction Engineering.

    Science.gov (United States)

    Guo, Yuqiao; Deng, Haitao; Sun, Xu; Li, Xiuling; Zhao, Jiyin; Wu, Junchi; Chu, Wangsheng; Zhang, Sijia; Pan, Haibin; Zheng, Xusheng; Wu, Xiaojun; Jin, Changqing; Wu, Changzheng; Xie, Yi

    2017-08-01

    2D transition-metal dichalcogenides (TMDCs) are currently the key to the development of nanoelectronics. However, TMDCs are predominantly nonmagnetic, greatly hindering the advancement of their spintronic applications. Here, an experimental realization of intrinsic magnetic ordering in a pristine TMDC lattice is reported, bringing a new class of ferromagnetic semiconductors among TMDCs. Through van der Waals (vdW) interaction engineering of 2D vanadium disulfide (VS 2 ), dual regulation of spin properties and bandgap brings about intrinsic ferromagnetism along with a small bandgap, unravelling the decisive role of vdW gaps in determining the electronic states in 2D VS 2 . An overall control of the electronic states of VS 2 is also demonstrated: bond-enlarging triggering a metal-to-semiconductor electronic transition and bond-compression inducing metallization in 2D VS 2 . The pristine VS 2 lattice thus provides a new platform for precise manipulation of both charge and spin degrees of freedom in 2D TMDCs availing spintronic applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Principal component reconstruction (PCR) for cine CBCT with motion learning from 2D fluoroscopy.

    Science.gov (United States)

    Gao, Hao; Zhang, Yawei; Ren, Lei; Yin, Fang-Fang

    2018-01-01

    This work aims to generate cine CT images (i.e., 4D images with high-temporal resolution) based on a novel principal component reconstruction (PCR) technique with motion learning from 2D fluoroscopic training images. In the proposed PCR method, the matrix factorization is utilized as an explicit low-rank regularization of 4D images that are represented as a product of spatial principal components and temporal motion coefficients. The key hypothesis of PCR is that temporal coefficients from 4D images can be reasonably approximated by temporal coefficients learned from 2D fluoroscopic training projections. For this purpose, we can acquire fluoroscopic training projections for a few breathing periods at fixed gantry angles that are free from geometric distortion due to gantry rotation, that is, fluoroscopy-based motion learning. Such training projections can provide an effective characterization of the breathing motion. The temporal coefficients can be extracted from these training projections and used as priors for PCR, even though principal components from training projections are certainly not the same for these 4D images to be reconstructed. For this purpose, training data are synchronized with reconstruction data using identical real-time breathing position intervals for projection binning. In terms of image reconstruction, with a priori temporal coefficients, the data fidelity for PCR changes from nonlinear to linear, and consequently, the PCR method is robust and can be solved efficiently. PCR is formulated as a convex optimization problem with the sum of linear data fidelity with respect to spatial principal components and spatiotemporal total variation regularization imposed on 4D image phases. The solution algorithm of PCR is developed based on alternating direction method of multipliers. The implementation is fully parallelized on GPU with NVIDIA CUDA toolbox and each reconstruction takes about a few minutes. The proposed PCR method is validated and

  10. 2D soil and engineering-seismic bedrock modeling of eastern part of Izmir inner bay/Turkey

    Science.gov (United States)

    Pamuk, Eren; Akgün, Mustafa; Özdağ, Özkan Cevdet; Gönenç, Tolga

    2017-02-01

    Soil-bedrock models are used as a base when the earthquake-soil common behaviour is defined. Moreover, the medium which is defined as bedrock is classified as engineering and seismic bedrock in itself. In these descriptions, S-wave velocity is (Vs) used as a base. The mediums are called soil where the Vs is bedrock as well. Additionally, the parts are called engineering bedrock where the Vs is between 3000 m/s and 760 m/s, the parts where are bigger than 3000 m/s called seismic bedrock. The interfacial's horizontal topography where is between engineering and seismic bedrock is effective on earthquake's effect changing on the soil surface. That's why, 2D soil-bedrock models must be used to estimate the earthquake effect that could occur on the soil surface. In this research, surface wave methods and microgravity method were used for occuring the 2D soil-bedrock models in the east of İzmir bay. In the first stage, velocity values were obtained by the studies using surface wave methods. Then, density values were calculated from these velocity values by the help of the empiric relations. 2D soil-bedrock models were occurred based upon both Vs and changing of density by using these density values in microgravity model. When evaluating the models, it was determined that the soil is 300-400 m thickness and composed of more than one layers in parts where are especially closer to the bay. Moreover, it was observed that the soil thickness changes in the direction of N-S. In the study area, geologically, it should be thought the engineering bedrock is composed of Bornova melange and seismic bedrock unit is composed of Menderes massif. Also, according to the geophysical results, Neogene limestone and andesite units at between 200 and 400 m depth show that engineering bedrock characteristic.

  11. Digital Cadavers: Online 2D Learning Resources Enhance Student Learning in Practical Head and Neck Anatomy within Dental Programs

    Directory of Open Access Journals (Sweden)

    Mahmoud M. Bakr

    2016-01-01

    Full Text Available Head and neck anatomy provides core concepts within preclinical dental curricula. Increased student numbers, reduced curricula time, and restricted access to laboratory-based human resources have increased technology enhanced learning approaches to support student learning. Potential advantages include cost-effectiveness, off-campus access, and self-directed review or mastery opportunities for students. This study investigated successful student learning within a first-year head and neck anatomy course at the School of Dentistry and Oral Health, Griffith University, Australia, taught by the same teaching team, between 2010 and 2015. Student learning success was compared, for cohorts before and after implementation of a supplementary, purpose-designed online digital library and quiz bank. Success of these online resources was confirmed using overall students’ performance within the course assessment tasks and Student Evaluation of Course surveys and online access data. Engagement with these supplementary 2D online resources, targeted at improving laboratory study, was positively evaluated by students (mean 85% and significantly increased their laboratory grades (mean difference 6%, P<0.027, despite being assessed using cadaveric resources. Written assessments in final exams were not significantly improved. Expanded use of supplementary online resources is planned to support student learning and success in head and neck anatomy, given the success of this intervention.

  12. 2-D Resistivity Assessment of Subsurface Characterization and its Engineering and Environmental Implications at SiLC

    Science.gov (United States)

    Nordiana, M. M.; Azwin, I. N.; Saad, Rosli; Jia, Teoh Ying; Anderson, A. B.; Tonnizam, Edy; Taqiuddin Zakaria, Muhamad

    2017-04-01

    The role of geophysics in Environmental Earth Sciences and Engineering is considered. In the developing era, geophysics has mainly contributed in investigation of new constructions such as tunnels, road, dams and high-rise buildings. This study was carried out to assess the foundation depths around a construction site in the Southern Industrial & Logistics Clusters (SiLC), Nusajaya, Johor using 2-D resistivity method. The 2-D resistivity method was carried out with a view to characterize different subsurface geological and to provide the engineering and environmental geophysical characterization of the study area. Measurements of eight 2-D resistivity profile using Pole-dipole array with 2 m minimum electrode spacing was taken with the use of ABEM Terrameter SAS4000 and ES10-64C selector. The results are presented as inversion model resistivity with the outline of the survey line. The inversion model resistivity from L1-L8 obtained is characterized by resistivity range of 1-8000 ohm-m. This range indicates the occurrence of silt, clay, sandy clay and sand whose ranges are; 10-100 ohm-m, 1-100 ohm-m, 100-800 ohm-m and 100-3000 ohm-m respectively. However, there was a boulder with range of >5000 ohm-m and saturated zone (1-20 ohm-m) which may indicate the weak zones of the study area. The 2-D resistivity method is not intended to replace borings, except in specific cases where information gathered would be sufficient to address the intended engineering and environmental purpose.

  13. 3D/2D model-to-image registration by imitation learning for cardiac procedures.

    Science.gov (United States)

    Toth, Daniel; Miao, Shun; Kurzendorfer, Tanja; Rinaldi, Christopher A; Liao, Rui; Mansi, Tommaso; Rhode, Kawal; Mountney, Peter

    2018-05-12

    In cardiac interventions, such as cardiac resynchronization therapy (CRT), image guidance can be enhanced by involving preoperative models. Multimodality 3D/2D registration for image guidance, however, remains a significant research challenge for fundamentally different image data, i.e., MR to X-ray. Registration methods must account for differences in intensity, contrast levels, resolution, dimensionality, field of view. Furthermore, same anatomical structures may not be visible in both modalities. Current approaches have focused on developing modality-specific solutions for individual clinical use cases, by introducing constraints, or identifying cross-modality information manually. Machine learning approaches have the potential to create more general registration platforms. However, training image to image methods would require large multimodal datasets and ground truth for each target application. This paper proposes a model-to-image registration approach instead, because it is common in image-guided interventions to create anatomical models for diagnosis, planning or guidance prior to procedures. An imitation learning-based method, trained on 702 datasets, is used to register preoperative models to intraoperative X-ray images. Accuracy is demonstrated on cardiac models and artificial X-rays generated from CTs. The registration error was [Formula: see text] on 1000 test cases, superior to that of manual ([Formula: see text]) and gradient-based ([Formula: see text]) registration. High robustness is shown in 19 clinical CRT cases. Besides the proposed methods feasibility in a clinical environment, evaluation has shown good accuracy and high robustness indicating that it could be applied in image-guided interventions.

  14. 2D co-ordinate transformation based on a spike timing-dependent plasticity learning mechanism.

    Science.gov (United States)

    Wu, QingXiang; McGinnity, Thomas Martin; Maguire, Liam; Belatreche, Ammar; Glackin, Brendan

    2008-11-01

    In order to plan accurate motor actions, the brain needs to build an integrated spatial representation associated with visual stimuli and haptic stimuli. Since visual stimuli are represented in retina-centered co-ordinates and haptic stimuli are represented in body-centered co-ordinates, co-ordinate transformations must occur between the retina-centered co-ordinates and body-centered co-ordinates. A spiking neural network (SNN) model, which is trained with spike-timing-dependent-plasticity (STDP), is proposed to perform a 2D co-ordinate transformation of the polar representation of an arm position to a Cartesian representation, to create a virtual image map of a haptic input. Through the visual pathway, a position signal corresponding to the haptic input is used to train the SNN with STDP synapses such that after learning the SNN can perform the co-ordinate transformation to generate a representation of the haptic input with the same co-ordinates as a visual image. The model can be applied to explain co-ordinate transformation in spiking neuron based systems. The principle can be used in artificial intelligent systems to process complex co-ordinate transformations represented by biological stimuli.

  15. Ultrasensitive tunability of the direct bandgap of 2D InSe flakes via strain engineering

    Science.gov (United States)

    Li, Yang; Wang, Tianmeng; Wu, Meng; Cao, Ting; Chen, Yanwen; Sankar, Raman; Ulaganathan, Rajesh K.; Chou, Fangcheng; Wetzel, Christian; Xu, Cheng-Yan; Louie, Steven G.; Shi, Su-Fei

    2018-04-01

    InSe, a member of the layered materials family, is a superior electronic and optical material which retains a direct bandgap feature from the bulk to atomically thin few-layers and high electronic mobility down to a single layer limit. We, for the first time, exploit strain to drastically modify the bandgap of two-dimensional (2D) InSe nanoflakes. We demonstrated that we could decrease the bandgap of a few-layer InSe flake by 160 meV through applying an in-plane uniaxial tensile strain to 1.06% and increase the bandgap by 79 meV through applying an in-plane uniaxial compressive strain to 0.62%, as evidenced by photoluminescence (PL) spectroscopy. The large reversible bandgap change of ~239 meV arises from a large bandgap change rate (bandgap strain coefficient) of few-layer InSe in response to strain, ~154 meV/% for uniaxial tensile strain and ~140 meV/% for uniaxial compressive strain, representing the most pronounced uniaxial strain-induced bandgap strain coefficient experimentally reported in 2D materials. We developed a theoretical understanding of the strain-induced bandgap change through first-principles DFT and GW calculations. We also confirmed the bandgap change by photoconductivity measurements using excitation light with different photon energies. The highly tunable bandgap of InSe in the infrared regime should enable a wide range of applications, including electro-mechanical, piezoelectric and optoelectronic devices.

  16. Interpretation of 2D Resistivity with Engineering Characterisation of Subsurface Exploration in Nusajaya Johor, Malaysia

    Science.gov (United States)

    Akip Tan, S. N. Mohd; Dan, M. F. Md; Edy Tonnizam, M.; Saad, R.; Madun, A.; Hazreek, Z. A. M.

    2018-04-01

    2-D resistivity technique and pole-dipole array with spacing of 2 m electrode and total spacing of 80 m were adopted to map and characterize the shallow subsurface in a sedimentary area at Nusajaya, Johor. Geological field mapping and laboratory testing were conducted to determine weathering grades. Res2Dinv software was used to generate the inversion model resistivity. The result shows sandstone contains iron mineral (30-1000ohm-m) and weathered sandstone (500-1000 ohm-m). The lowest layer represents sandstone and siltstone with the highest range from 1500 through 5000 ohm-m. The weathering grade IV and V of sandstone in the actual profile indicates the range from 30 to 1000 ohm-m, whereas grade II and III in ground mass matched the higest range. Overall, the increase of weathering grade influenced both the physical properties and strength of rocks.

  17. 2D/3D video content adaptation decision engine based on content classification and user assessment

    Science.gov (United States)

    Fernandes, Rui; Andrade, M. T.

    2017-07-01

    Multimedia adaptation depends on several factors, such as the content itself, the consumption device and its characteristics, the transport and access networks and the user. An adaptation decision engine, in order to provide the best possible Quality of Experience to a user, needs to have information about all variables that may influence its decision. For the aforementioned factors, we implement content classification, define device classes, consider limited bandwidth scenarios and categorize user preferences based on a subjective quality evaluation test. The results of these actions generate vital information to pass to the adaptation decision engine so that its operation may provide the indication of the most suitable adaptation to perform that delivers the best possible outcome for the user under the existing constraints.

  18. Catalyst Interface Engineering for Improved 2D Film Lift-Off and Transfer

    Science.gov (United States)

    2016-01-01

    The mechanisms by which chemical vapor deposited (CVD) graphene and hexagonal boron nitride (h-BN) films can be released from a growth catalyst, such as widely used copper (Cu) foil, are systematically explored as a basis for an improved lift-off transfer. We show how intercalation processes allow the local Cu oxidation at the interface followed by selective oxide dissolution, which gently releases the 2D material (2DM) film. Interfacial composition change and selective dissolution can thereby be achieved in a single step or split into two individual process steps. We demonstrate that this method is not only highly versatile but also yields graphene and h-BN films of high quality regarding surface contamination, layer coherence, defects, and electronic properties, without requiring additional post-transfer annealing. We highlight how such transfers rely on targeted corrosion at the catalyst interface and discuss this in context of the wider CVD growth and 2DM transfer literature, thereby fostering an improved general understanding of widely used transfer processes, which is essential to numerous other applications. PMID:27934130

  19. Effectiveness of Applying 2D Static Depictions and 3D Animations to Orthographic Views Learning in Graphical Course

    Science.gov (United States)

    Wu, Chih-Fu; Chiang, Ming-Chin

    2013-01-01

    This study provides experiment results as an educational reference for instructors to help student obtain a better way to learn orthographic views in graphical course. A visual experiment was held to explore the comprehensive differences between 2D static and 3D animation object features; the goal was to reduce the possible misunderstanding…

  20. Effects of Training Method and Gender on Learning 2D/3D Geometry

    Science.gov (United States)

    Khairulanuar, Samsudin; Nazre, Abd Rashid; Jamilah, H.; Sairabanu, Omar Khan; Norasikin, Fabil

    2010-01-01

    This article reports the findings of an experimental study involving 36 primary school students (16 girls, 20 boys, Mean age = 9.5 years, age range: 8-10 years) in geometrical understanding of 2D and 3D objects. Students were assigned into two experimental groups and one control group based on a stratified random sampling procedure. The first…

  1. Performance evaluation of 2D and 3D deep learning approaches for automatic segmentation of multiple organs on CT images

    Science.gov (United States)

    Zhou, Xiangrong; Yamada, Kazuma; Kojima, Takuya; Takayama, Ryosuke; Wang, Song; Zhou, Xinxin; Hara, Takeshi; Fujita, Hiroshi

    2018-02-01

    The purpose of this study is to evaluate and compare the performance of modern deep learning techniques for automatically recognizing and segmenting multiple organ regions on 3D CT images. CT image segmentation is one of the important task in medical image analysis and is still very challenging. Deep learning approaches have demonstrated the capability of scene recognition and semantic segmentation on nature images and have been used to address segmentation problems of medical images. Although several works showed promising results of CT image segmentation by using deep learning approaches, there is no comprehensive evaluation of segmentation performance of the deep learning on segmenting multiple organs on different portions of CT scans. In this paper, we evaluated and compared the segmentation performance of two different deep learning approaches that used 2D- and 3D deep convolutional neural networks (CNN) without- and with a pre-processing step. A conventional approach that presents the state-of-the-art performance of CT image segmentation without deep learning was also used for comparison. A dataset that includes 240 CT images scanned on different portions of human bodies was used for performance evaluation. The maximum number of 17 types of organ regions in each CT scan were segmented automatically and compared to the human annotations by using ratio of intersection over union (IU) as the criterion. The experimental results demonstrated the IUs of the segmentation results had a mean value of 79% and 67% by averaging 17 types of organs that segmented by a 3D- and 2D deep CNN, respectively. All the results of the deep learning approaches showed a better accuracy and robustness than the conventional segmentation method that used probabilistic atlas and graph-cut methods. The effectiveness and the usefulness of deep learning approaches were demonstrated for solving multiple organs segmentation problem on 3D CT images.

  2. Problem Based Learning for engineering.

    Science.gov (United States)

    Kumar, Dinesh; Radcliffe, Pj

    2017-07-01

    the role of Problem Based Learning (PBL) is relative clear in domains such as medicine but its efficacy in engineering is as yet less certain. To clarify the role of PBL in engineering, a 3 day workshop was conducted for senior Brazilian engineering academics where they were given the theory and then an immersive PBL experience. One major purpose for running this workshop was for them to identify suitable courses where PBL could be considered. During this workshop, they were split in teams and given a diverse range of problems. At the conclusion of the workshop, a quantifiable survey was conducted and the results show that PBL can deliver superior educational outcomes providing the student group is drawn from the top 5% of the year 12 students, and that significantly higher resources are made available. Thus, any proposed PBL program in engineering must be able to demonstrate that it can meet these requirements before it can move forward to implementation.

  3. Machine-Learning Algorithms to Automate Morphological and Functional Assessments in 2D Echocardiography.

    Science.gov (United States)

    Narula, Sukrit; Shameer, Khader; Salem Omar, Alaa Mabrouk; Dudley, Joel T; Sengupta, Partho P

    2016-11-29

    Machine-learning models may aid cardiac phenotypic recognition by using features of cardiac tissue deformation. This study investigated the diagnostic value of a machine-learning framework that incorporates speckle-tracking echocardiographic data for automated discrimination of hypertrophic cardiomyopathy (HCM) from physiological hypertrophy seen in athletes (ATH). Expert-annotated speckle-tracking echocardiographic datasets obtained from 77 ATH and 62 HCM patients were used for developing an automated system. An ensemble machine-learning model with 3 different machine-learning algorithms (support vector machines, random forests, and artificial neural networks) was developed and a majority voting method was used for conclusive predictions with further K-fold cross-validation. Feature selection using an information gain (IG) algorithm revealed that volume was the best predictor for differentiating between HCM ands. ATH (IG = 0.24) followed by mid-left ventricular segmental (IG = 0.134) and average longitudinal strain (IG = 0.131). The ensemble machine-learning model showed increased sensitivity and specificity compared with early-to-late diastolic transmitral velocity ratio (p 13 mm. In this subgroup analysis, the automated model continued to show equal sensitivity, but increased specificity relative to early-to-late diastolic transmitral velocity ratio, e', and strain. Our results suggested that machine-learning algorithms can assist in the discrimination of physiological versus pathological patterns of hypertrophic remodeling. This effort represents a step toward the development of a real-time, machine-learning-based system for automated interpretation of echocardiographic images, which may help novice readers with limited experience. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  4. Statics learning from engineering examples

    CERN Document Server

    Emri, Igor

    2016-01-01

    This textbook introduces and explains the basic concepts on which statics is based utilizing real engineering examples. The authors emphasize the learning process by showing a real problem, analyzing it, simplifying it, and developing a way to solve it. This feature teaches students intuitive thinking in solving real engineering problems using the fundamentals of Newton’s laws. This book also: · Stresses representation of physical reality in ways that allow students to solve problems and obtain meaningful results · Emphasizes identification of important features of the structure that should be included in a model and which features may be omitted · Facilitates students' understanding and mastery of the "flow of thinking" practiced by professional engineers.

  5. Rancang Bangun Permainan Edukasi Matematika dan Fisika dengan Memanfaatkan Accelerometer dan Physics Engine Box2d pada Android

    Directory of Open Access Journals (Sweden)

    Putri Nikensasi

    2012-09-01

    Full Text Available Perkembangan industri permainan mobil yang semakin meningkat memotivasi para pengembang permainan mobil untuk membuat inovasi-inovasi terbaru dalam permainannya. Salah satu inovasi tersebut yaitu permainan edukasi, namun saat ini permainan edukasi kurang diminati karena aturan permainannya yang cenderung membosankan. Pengembangan permainan ini ditujukan untuk membuat sebuah permainan mobil edukasi dengan memanfaatkan teknologi mobil terbaru dalam aturan permainannya sehingga permainan tersebut tidak membosankan. Aplikasi yang dikembangkan merupakan aplikasi permainan mobil edukasi yang mengajarkan ilmu matematika dan fisika kepada pemainnya. Teknologi baru yang digunakan dalam permainan ini yaitu accelerometer pada sistem operasi Android yang diintegrasikan dengan Physics Engine Library Box2D. Selain itu, permainan ini dibangun dengan menggunakan Adobe Flash CS5.5 dan bahasa pemrograman Actionscript 3 (AS3 serta Adobe Air sebagai runtime aplikasinya. Uji coba dilakukan dengan menggunakan perangkat Android versi 2.3. Dari uji coba dapat disimpulkan bahwa Adobe Flash CS5.5 dapat digunakan untuk membuat permainan mobil edukasi pada perangkat Android dan mengakses sensor accelerometer-nya.

  6. Random forest learning of ultrasonic statistical physics and object spaces for lesion detection in 2D sonomammography

    Science.gov (United States)

    Sheet, Debdoot; Karamalis, Athanasios; Kraft, Silvan; Noël, Peter B.; Vag, Tibor; Sadhu, Anup; Katouzian, Amin; Navab, Nassir; Chatterjee, Jyotirmoy; Ray, Ajoy K.

    2013-03-01

    Breast cancer is the most common form of cancer in women. Early diagnosis can significantly improve lifeexpectancy and allow different treatment options. Clinicians favor 2D ultrasonography for breast tissue abnormality screening due to high sensitivity and specificity compared to competing technologies. However, inter- and intra-observer variability in visual assessment and reporting of lesions often handicaps its performance. Existing Computer Assisted Diagnosis (CAD) systems though being able to detect solid lesions are often restricted in performance. These restrictions are inability to (1) detect lesion of multiple sizes and shapes, and (2) differentiate between hypo-echoic lesions from their posterior acoustic shadowing. In this work we present a completely automatic system for detection and segmentation of breast lesions in 2D ultrasound images. We employ random forests for learning of tissue specific primal to discriminate breast lesions from surrounding normal tissues. This enables it to detect lesions of multiple shapes and sizes, as well as discriminate between hypo-echoic lesion from associated posterior acoustic shadowing. The primal comprises of (i) multiscale estimated ultrasonic statistical physics and (ii) scale-space characteristics. The random forest learns lesion vs. background primal from a database of 2D ultrasound images with labeled lesions. For segmentation, the posterior probabilities of lesion pixels estimated by the learnt random forest are hard thresholded to provide a random walks segmentation stage with starting seeds. Our method achieves detection with 99.19% accuracy and segmentation with mean contour-to-contour error < 3 pixels on a set of 40 images with 49 lesions.

  7. Action learning in undergraduate engineering thesis supervision

    OpenAIRE

    Stappenbelt, Brad

    2017-01-01

    In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative investigated the influence of the action learning environment on student approaches to learning and any accompanying academic, learning and personal benefits realised. The influence of preferred learning styles on set function and s...

  8. teaching and learning methodologies in engineering education

    African Journals Online (AJOL)

    Global Journal

    and learning of engineering in Nigerian Universities and suggests ways of improving engineering education in ... and inadequate collaboration between industries and schools. .... can book at their convenient time without conflicting with their ...

  9. Interactive learning software for electrical engineering subjects ...

    African Journals Online (AJOL)

    Interactive learning software for electrical engineering subjects using MATLAB and ... Keywords: electrical engineering; MATLAB; graphic user interface (GUI); educational software. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  10. ENGINEERING OF UNIVERSITY INTELLIGENT LEARNING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Vasiliy M. Trembach

    2016-01-01

    Full Text Available In the article issues of engineering intelligent tutoring systems of University with adaptation are considered. The article also dwells on some modern approaches to engineering of information systems. It shows the role of engineering e-learning devices (systems in system engineering. The article describes the basic principles of system engineering and these principles are expanded regarding to intelligent information systems. The structure of intelligent learning systems with adaptation of the individual learning environments based on services is represented in the article.

  11. Action Learning in Undergraduate Engineering Thesis Supervision

    Science.gov (United States)

    Stappenbelt, Brad

    2017-01-01

    In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative investigated the influence of the action learning environment on student approaches…

  12. THE BLENDED LEARNING OF ELECTRICITY USING LEARNING OBJECTS IN ENGINEERING

    Directory of Open Access Journals (Sweden)

    Lilia Maria Siqueira

    2010-09-01

    Full Text Available This work presents a proposal for the blended learning of Electricity education in Engineering, using resources called learning objects. The experience occurred with students enrolled on the Electrical Engineering and Computer Engineering courses at PUCPR University. It made possible the contact with interdisciplinary themes related to the study of electricity and the professional curriculum contents. The learning objects, offered during the semester, were anchored on PUCPR’s proprietary virtual educational environment, called Eureka. The students’ evaluation results showed that the study through learning objects in a virtual environment is significant for learning.

  13. Process Systems Engineering Education: Learning by Research

    Science.gov (United States)

    Abbas, A.; Alhammadi, H. Y.; Romagnoli, J. A.

    2009-01-01

    In this paper, we discuss our approach in teaching the final-year course Process Systems Engineering. Students are given ownership of the course by transferring to them the responsibility of learning. A project-based group environment stimulates learning while solving a real engineering problem. We discuss postgraduate student involvement and how…

  14. Paired peer learning through engineering education outreach

    Science.gov (United States)

    Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

    2017-01-01

    Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

  15. The depth estimation of 3D face from single 2D picture based on manifold learning constraints

    Science.gov (United States)

    Li, Xia; Yang, Yang; Xiong, Hailiang; Liu, Yunxia

    2018-04-01

    The estimation of depth is virtual important in 3D face reconstruction. In this paper, we propose a t-SNE based on manifold learning constraints and introduce K-means method to divide the original database into several subset, and the selected optimal subset to reconstruct the 3D face depth information can greatly reduce the computational complexity. Firstly, we carry out the t-SNE operation to reduce the key feature points in each 3D face model from 1×249 to 1×2. Secondly, the K-means method is applied to divide the training 3D database into several subset. Thirdly, the Euclidean distance between the 83 feature points of the image to be estimated and the feature point information before the dimension reduction of each cluster center is calculated. The category of the image to be estimated is judged according to the minimum Euclidean distance. Finally, the method Kong D will be applied only in the optimal subset to estimate the depth value information of 83 feature points of 2D face images. Achieving the final depth estimation results, thus the computational complexity is greatly reduced. Compared with the traditional traversal search estimation method, although the proposed method error rate is reduced by 0.49, the number of searches decreases with the change of the category. In order to validate our approach, we use a public database to mimic the task of estimating the depth of face images from 2D images. The average number of searches decreased by 83.19%.

  16. 2D and 3D Modeling Efforts in Fuel Film Cooling of Liquid Rocket Engines (Conference Paper with Briefing Charts)

    Science.gov (United States)

    2017-01-12

    to determine what parameters drive unsteadiness in fuel films, and how these parameters affect wall temperature profiles. Parametric studies performed...temperature profiles. Parametric studies performed in 2D suggest that a Helmholtz resonator exists for simple slot geometries. Frequencies in 3D were...effect on film cooling effectiveness. In general, the heat flux exhibits complex trends and did not scale well with chamber pressure. ∗Aerospace

  17. Action learning in undergraduate engineering thesis supervision

    Directory of Open Access Journals (Sweden)

    Brad Stappenbelt

    2017-03-01

    Full Text Available In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative, investigated the influence of the action learning environment on student approaches to learning and any accompanying academic, learning and personal benefits realised. The influence of preferred learning styles on set function and student adoption of the action learning process were also examined. The action learning environment implemented had a measurable significant positive effect on student academic performance, their ability to cope with the stresses associated with conducting a research thesis, the depth of learning, the development of autonomous learners and student perception of the research thesis experience. The present study acts as an addendum to a smaller scale implementation of this action learning approach, applied to supervision of third and fourth year research projects and theses, published in 2010.

  18. Numerical Analysis of the Combustion and Emission Characteristics of Diesel Engines with Multiple Injection Strategies Using a Modified 2-D Flamelet Model

    Directory of Open Access Journals (Sweden)

    Gyujin Kim

    2017-08-01

    Full Text Available The multiple injection strategy has been widely used in diesel engines to reduce engine noise, NOx and soot formation. Fuel injection developments such as the common-rail and piezo-actuator system provide more precise control of the injection quantity and time under higher injection pressures. As various injection strategies become accessible, it is important to understand the interaction of each fuel stream and following combustion process under the multiple injection strategy. To investigate these complex processes quantitatively, numerical analysis using CFD is a good alternative to overcome the limitation of experiments. A modified 2-D flamelet model is further developed from previous work to model multi-fuel streams with higher accuracy. The model was validated under various engine operating conditions and captures the combustion and emissions characteristics as well as several parametric variations. The model is expected to be used to suggest advanced injection strategies in engine development processes.

  19. Off-lattice self-learning kinetic Monte Carlo: application to 2D cluster diffusion on the fcc(111) surface

    International Nuclear Information System (INIS)

    Kara, Abdelkader; Yildirim, Handan; Rahman, Talat S; Trushin, Oleg

    2009-01-01

    We report developments of the kinetic Monte Carlo (KMC) method with improved accuracy and increased versatility for the description of atomic diffusivity on metal surfaces. The on-lattice constraint built into our recently proposed self-learning KMC (SLKMC) (Trushin et al 2005 Phys. Rev. B 72 115401) is released, leaving atoms free to occupy 'off-lattice' positions to accommodate several processes responsible for small-cluster diffusion, periphery atom motion and heteroepitaxial growth. This technique combines the ideas embedded in the SLKMC method with a new pattern-recognition scheme fitted to an off-lattice model in which relative atomic positions are used to characterize and store configurations. Application of a combination of the 'drag' and the repulsive bias potential (RBP) methods for saddle point searches allows the treatment of concerted cluster, and multiple- and single-atom, motions on an equal footing. This tandem approach has helped reveal several new atomic mechanisms which contribute to cluster migration. We present applications of this off-lattice SLKMC to the diffusion of 2D islands of Cu (containing 2-30 atoms) on Cu and Ag(111), using the interatomic potential from the embedded-atom method. For the hetero-system Cu/Ag(111), this technique has uncovered mechanisms involving concerted motions such as shear, breathing and commensurate-incommensurate occupancies. Although the technique introduces complexities in storage and retrieval, it does not introduce noticeable extra computational cost.

  20. Knowledge and Learning in Engineering Practice

    DEFF Research Database (Denmark)

    Buch, Anders

    2007-01-01

    , this chapter discusses the cencept of learning and purports to theorize learning in a Social Theory of Learning (STL). The attempt to reconstruct learning in an STL addresses three main issues: an STL must try to specify the subject-world relationship, describe the 'mechanism' of learning, and identify......During the 20th century, traditional epistemological theories of knowledge have been under siege. In recent years, efforts have been made to reconstruct the concept of 'knowledge' to emphasize its contextual, situated and social character. Drawing on the results and methods of these efforts...... the 'telos' of learning. This attempt will in fact give answers to three fundamental questions: 1) What is learning? 2) How do we learn? and 3) Why do we learn? These questions are discussed in relation to engineering practices of getting to know and learning....

  1. Kinect Engineering with Learning (KEWL)

    Science.gov (United States)

    Goza, Sharon; Shores, David; Menzies, Alexander; Kong, Dara; Clausen, Matt; Leu, William; Kraesig, Raymond; Richeson, Eric; Wallace, Clinton; Hernandez, Moses; hide

    2013-01-01

    According to a Nielsen survey at the time of this reporting, 41% of all households have a game console. This is one market in which NASA has been absent from education and outreach efforts. Kinect Engineering with Learning (KEWL) is made to enter into that market and bring NASA education and outreach to a very familiar venue. KEWL creates an education and outreach experience that is more participatory, both in a school and museum environment. KEWL is a set of applications that runs on an Xbox 360 using the Kinect controller used for education and outreach. These applications currently include: Train R2, a visual simulation of Robonaut 2 that allows students to control a virtual R2 in a game environment; Drive R2, an interface using the Xbox 360 and Kinect controller that allows students to control the real R2 using the methods they learned playing Train R2; ISS experience, a visual tour of the interior of the International Space Station where students use their body to fly through the virtual ISS; Gravity Ball, a simulation of throwing balls in the gravity of different planets; Solar Array repair, a simulation of the simplified STS-121 solar array repair mission; and PlaySpace, a Mars/Moon application that allows students to experience different aspects of Mars/Moon. Users can "fly through" the ISS using their body, allowing an experience similar to what an astronaut would have on orbit. In PlaySpace, users can fly over the surface of Mars and view surface data obtained by Mars rovers. Users of Train R2 and Drive R2 can experience what it is like to control a robot over a distance with a time delay, simulating the time delay that would occur between ground control and an on-orbit robot. The initial ISS experiences were built using parts of code from the NASA Enigma software. The models used in these experiences were also from the Integrated Graphics Operations and Analysis Lab model database. The PlaySpace experience incorporates surface data obtained from NASA

  2. Paired Peer Learning through Engineering Education Outreach

    Science.gov (United States)

    Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

    2017-01-01

    Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and…

  3. The Framework of Intervention Engine Based on Learning Analytics

    Science.gov (United States)

    Sahin, Muhittin; Yurdugül, Halil

    2017-01-01

    Learning analytics primarily deals with the optimization of learning environments and the ultimate goal of learning analytics is to improve learning and teaching efficiency. Studies on learning analytics seem to have been made in the form of adaptation engine and intervention engine. Adaptation engine studies are quite widespread, but intervention…

  4. Active Learning in Engineering Education: A (Re)Introduction

    Science.gov (United States)

    Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

    2017-01-01

    The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

  5. Principles of e-learning systems engineering

    CERN Document Server

    Gilbert, Lester

    2008-01-01

    The book integrates the principles of software engineering with the principles of educational theory, and applies them to the problems of e-learning development, thus establishing the discipline of E-learning systems engineering. For the first time, these principles are collected and organised into the coherent framework that this book provides. Both newcomers to and established practitioners in the field are provided with integrated and grounded advice on theory and practice. The book presents strong practical and theoretical frameworks for the design and development of technology-based mater

  6. Self-learning search engines

    NARCIS (Netherlands)

    Schuth, A.

    2015-01-01

    How does a search engine such as Google know which search results to display? There are many competing algorithms that generate search results, but which one works best? We developed a new probabilistic method for quickly comparing large numbers of search algorithms by examining the results users

  7. Learning to Model in Engineering

    Science.gov (United States)

    Gainsburg, Julie

    2013-01-01

    Policymakers and education scholars recommend incorporating mathematical modeling into mathematics education. Limited implementation of modeling instruction in schools, however, has constrained research on how students learn to model, leaving unresolved debates about whether modeling should be reified and explicitly taught as a competence, whether…

  8. Teaching Engineering with Autonomous Learning Activities

    Science.gov (United States)

    Otero, Beatriz; Rodríguez, Eva; Royo, Pablo

    2015-01-01

    This paper proposes several activities that encourage self-learning in engineering courses. For each activity, the context and the pedagogical issues addressed are described emphasizing strengths and weaknesses. Specifically, this work describes and implements five activities, which are: questionnaires, conceptual maps, videos, jigsaw and…

  9. Problem Based Learning in Engineering Education

    DEFF Research Database (Denmark)

    Dahms, Mona-Lisa; Sauerbier, Gabriele; Stubbe, Korinna

    2006-01-01

    This paper describes a recent EU-project from five European Institutions. The aim was the development and implementation of a new international Master’s programme for staff development, directed towards the introduction of Problem Based Learning methods in the field of engineering education...

  10. Towards supramolecular engineering of functional nanomaterials: pre-programming multi-component 2D self-assembly at solid-liquid interfaces.

    Science.gov (United States)

    Ciesielski, Artur; Palma, Carlos-Andres; Bonini, Massimo; Samorì, Paolo

    2010-08-24

    Materials with a pre-programmed order at the supramolecular level can be engineered with a sub-nanometer precision making use of reversible non- covalent interactions. The intrinsic ability of supramolecular materials to recognize and exchange their constituents makes them constitutionally dynamic materials. The tailoring of the materials properties relies on the full control over the self-assembly behavior of molecular modules exposing recognition sites and incorporating functional units. In this review we focus on three classes of weak-interactions to form complex 2D architectures starting from properly designed molecular modules: van der Waals, metallo-ligand and hydrogen bonding. Scanning tunneling microscopy studies will provide evidence with a sub-nanometer resolution, on the formation of responsive multicomponent architectures with controlled geometries and properties. Such endeavor enriches the scientist capability of generating more and more complex smart materials featuring controlled functions and unprecedented properties.

  11. The Influences of the 2D Image-Based Augmented Reality and Virtual Reality on Student Learning

    Science.gov (United States)

    Liou, Hsin-Hun; Yang, Stephen J. H.; Chen, Sherry Y.; Tarng, Wernhuar

    2017-01-01

    Virtual reality (VR) learning environments can provide students with concepts of the simulated phenomena, but users are not allowed to interact with real elements. Conversely, augmented reality (AR) learning environments blend real-world environments so AR could enhance the effects of computer simulation and promote students' realistic experience.…

  12. Dynamic Resource Allocation with Integrated Reinforcement Learning for a D2D-Enabled LTE-A Network with Access to Unlicensed Band

    Directory of Open Access Journals (Sweden)

    Alia Asheralieva

    2016-01-01

    Full Text Available We propose a dynamic resource allocation algorithm for device-to-device (D2D communication underlying a Long Term Evolution Advanced (LTE-A network with reinforcement learning (RL applied for unlicensed channel allocation. In a considered system, the inband and outband resources are assigned by the LTE evolved NodeB (eNB to different device pairs to maximize the network utility subject to the target signal-to-interference-and-noise ratio (SINR constraints. Because of the absence of an established control link between the unlicensed and cellular radio interfaces, the eNB cannot acquire any information about the quality and availability of unlicensed channels. As a result, a considered problem becomes a stochastic optimization problem that can be dealt with by deploying a learning theory (to estimate the random unlicensed channel environment. Consequently, we formulate the outband D2D access as a dynamic single-player game in which the player (eNB estimates its possible strategy and expected utility for all of its actions based only on its own local observations using a joint utility and strategy estimation based reinforcement learning (JUSTE-RL with regret algorithm. A proposed approach for resource allocation demonstrates near-optimal performance after a small number of RL iterations and surpasses the other comparable methods in terms of energy efficiency and throughput maximization.

  13. Active Learning in Engineering Education: a (re)introduction

    DEFF Research Database (Denmark)

    Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

    2017-01-01

    The informal network ‘Active Learning in Engineering Education’ (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE...... were reviewed by the European Journal of Engineering Education community and this theme issue ended up with eight contributions, which are different both in their research and Active Learning approaches. These different Active Learning approaches are aligned with the different approaches that can...

  14. Project based learning for reactor engineering education

    International Nuclear Information System (INIS)

    Narabayashi, Tadashi; Tsuji, Masashi; Shimazu, Yoichiro

    2009-01-01

    Trial in education of nuclear engineering in Hokkaido University has proved to be quite attractive for students. It is an education system called Project Based Learning (PBL), which is not based on education by lecture only but based mostly on practice of students in the classroom. The system was adopted four years ago. In the actual class, we separated the student into several groups of the size about 6 students. In the beginning of each class room time, a brief explanations of the related theory or technical bases. Then the students discuss in their own group how to precede their design calculations and do the required calculation and evaluation. The target reactor type of each group was selected by the group members for themselves at the beginning of the semester as the first step of the project. The reactor types range from a small in house type to that for a nuclear ship. At the end of the semester, each group presents the final design. The presentation experience gives students a kind of fresh sensation. Nowadays the evaluation results of the subject by the students rank in the highest in the faculty of engineering. Based on the considerations above, we designed the framework of our PBL for reactor engineering. In this paper, we will present some lessons learned in this PBL education system from the educational points of view. The PBL education program is supported by IAE/METI in Japan for Nuclear Engineering Education. (author)

  15. Robust iterative learning control for multi-phase batch processes: an average dwell-time method with 2D convergence indexes

    Science.gov (United States)

    Wang, Limin; Shen, Yiteng; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong

    2018-01-01

    In order to cope with system disturbances in multi-phase batch processes with different dimensions, a hybrid robust control scheme of iterative learning control combined with feedback control is proposed in this paper. First, with a hybrid iterative learning control law designed by introducing the state error, the tracking error and the extended information, the multi-phase batch process is converted into a two-dimensional Fornasini-Marchesini (2D-FM) switched system with different dimensions. Second, a switching signal is designed using the average dwell-time method integrated with the related switching conditions to give sufficient conditions ensuring stable running for the system. Finally, the minimum running time of the subsystems and the control law gains are calculated by solving the linear matrix inequalities. Meanwhile, a compound 2D controller with robust performance is obtained, which includes a robust extended feedback control for ensuring the steady-state tracking error to converge rapidly. The application on an injection molding process displays the effectiveness and superiority of the proposed strategy.

  16. DIDACTIC ENGINEERING: DESIGNING NEW GENERATION LEARNING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Nail K. Nuriyev

    2016-09-01

    Full Text Available Introduction: the article deals with the organisation of training activities in the man-made environment. Didactic engineering is seen as a methodology within which problems of didactics are solved with application of pedagogical, psychological, engineering methods. It is obvious that in order to implement the training of future engineers in a competence-based format (according to educational standard a new type of teaching system is needed, with new capacities (properties. These systems should set each student towards the development of professionally significant (key abilities, taking into account his/her psychological characteristics; ensure training on the verge of permissible difficulties (developing training, and thereby achieve rapid development of key skills, through his/her zone of “immediate development”; to diagnose the quality of possession of a competence in the academic sense. For the objectivity and reliability of assessment of the level and depth of learned knowledge it is necessary to generate this evaluation in a metric format. As a result, we created a didactic system, which combines all the listed properties and the properties of classical systems. This allowed us to construct a new generation of didactic systems. Materials and Methods: the research is based on a systematic analysis of the activity of an engineer; on models of “zones of immediate development” by L. S. Vygotsky; on “developmental education” by L. N. Zankova; on the use of pedagogical and psychological patterns as well as taxonomic methods, didactic engineering, theory of probability and mathematical statistics. Results: constructed is a model for training engineers in the metric format of competence, which envisages a rapid development of students project and constructive abilit ies based on their knowledge learned. Discussion and Conclusions: the parameters defining the probability of engineer’s success have been described; the taxonomic scale

  17. Writers, Athletes and Engineers Learn by Doing

    Science.gov (United States)

    Narayanan, M.

    2009-12-01

    The author strongly believes that when one provides students more opportunity to write and publish, one actually is helping those students learn better. Writing in reality reinforces the knowledge acquired and clarifies fuzzy, indistinct and indefinable points. In a Learning Paradigm or a Discovery Paradigm, it is observed that evaluation is holistic, and student success outcomes are those that are actually measured. Many scholars have recommended and supported a value-added concept of education by doing assessments before, during, and after a course (Barr & Tagg, 1995). Other scholars have argued that achievement of educational objectives is becoming less and less measurable whereas the need for accountability is rising to the surface more frequently. The literature supports our intuitive belief that education in a new learning paradigm will prepare students for the work ahead of them (Cox, Grasha, & Richlin 1997, March). Technical writing has been a part of engineering education for a long time. Regardless, it appears that engineering students are more interested in spending productive time learning the mathematical aspects of subject matter. The students are reluctant to devote time and effort that involves descriptive writing. The trend is to develop an interactive problem-solving pedagogy that encourages the development of learner’s creativity, understanding, written and oral communication skills (Saxe, 1988; Senge, 1990; Sims, 1995; Young & Young, 1999). It is essential for the students to recognize the fact that writing indeed enhances their grasp over technical content. The author has outlined seven areas for assessing a writing assignment. 1. The student writing has an identified a specific focus on a given purpose. 2. The author has indicated an audience for the writing assignment. 3. The writer has specified conventions for format, flow and structure. 4. The learner has documented conventions for formality, voice and tone. 5. The individual has

  18. B-Learning Tools in Engineering Education

    Directory of Open Access Journals (Sweden)

    Angeles Cancela

    2013-04-01

    Full Text Available 0 false 21 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The New Higher Education System implies the adoption of different education systems than the traditional ones. Therefore, many college teachers today want to use some new mechanisms to teach the matter and to find better ways of engaging students in the learning process. The objective of this work is to evaluate different learning methods from the student’s point of view and share the authors’ experience towards a different mode of teaching. Three different learning techniques have been used on University of Vigo’s fifth-year engineering students and the students have answered a questionnaire in order to check the effectiveness of the different methods from the students’ point of view. The results of the experience show that the use of learning methods (cooperative learning and multimedia resources fosters student motivation and improves their retention, assimilation, understanding, and proper application of course content.

  19. Project KEWL: Kinect Engineering With Learning

    Science.gov (United States)

    Norris, Jeff; Goza, Sharon; Shores, David

    2011-01-01

    Project KEWL is a joint project between NASA/JPL and NASA/JSC to stimulate interest of children in Science, Technology, Engineering and Math (STEM) and bring the NASA space exploration experience to the classroom, museum and ultimately the living room. Using the Kinect game controller KEWL allows children to engage in NASA s missions in a fundamentally new way. KEWL allows children to experiment with gravity on Mars and the Moon; navigate through the International Space Station; fix a torn solar array on the ISS; drive a robot on Mars; visit an Asteroid; learn about the differences in gravity on different planets and control Robonaut 2 using their body as the input device. Project KEWL complements NASA s outreach investments in television, mobile platforms and the web by engaging the public through the rapidly expanding medium of console gaming. In 2008, 97% of teenagers played video games and 86% played on a home gaming console. (source: http://pewresearch.org/pubs/953/) As of March 2011, there have been more than 10 million Kinects sold. (source: http://www.itproportal.com/2011/03/10/kinect-record-breaking-sales-figures-top-10-million/) Project KEWL interacts with children on a platform on which they spend much of their time and teaches them information about NASA while they are having fun. Project KEWL progressed from completely custom C++ code written in house to using a commercial game engine. The art work and 3D geometry models come from existing engineering work or are created by the KEWL development team. Six different KEWL applications have been demonstrated at nine different venues including schools, museums, conferences, and NASA outreach events. These demonstrations have allowed the developers the chance to interact with players and observe the gameplay mechanics in action. The lessons learned were then incorporated into the subsequent versions of the applications.

  20. MODERN OR TRADITIONAL TEACHING STRATEGY IN LEARNING ENGINEERING MATHEMATICS COURSE

    Directory of Open Access Journals (Sweden)

    N. RAZALI

    2016-11-01

    Full Text Available First-year engineering students of the Faculty of Engineering and Built Environment, UKM are in the process of transition in the way they learn mathematics from pre-university level to the undergraduate level. It is essential for good engineers to have the ability to unfold mathematical problems in an efficient way. Thus, this research is done to investigate students preference in learning KKKQ1123 Engineering Mathematics I (Vector Calculus (VC course; either individually or in a team; using modern (e-learning or traditional (cooperative-learning teaching strategy. Questionnaires are given to the first year Chemical and Process Engineering students from academic year 2015/2016 and the results were analysed. Based on the finding, the students believed that the physical educators or teachers play an important role and that they have slightest preference in the traditional teaching strategy to learn engineering mathematics course.

  1. Exploring Complex Engineering Learning Over Time with Epistemic Network Analysis

    OpenAIRE

    Svarovsky, Gina Navoa

    2011-01-01

    Recently, K-12 engineering education has received increased attention as a pathway to building stronger foundations in math andscience and introducing young people to the profession. However, the National Academy of Engineering found that many K-12engineering programs focus heavily on engineering design and science and math learning while minimizing the development ofengineering habits of mind. This narrowly-focused engineering activity can leave young people – and in particular, girls – with...

  2. Enhancing Engineering Students’ Learning in an Environmental Microbiology Course

    Directory of Open Access Journals (Sweden)

    Zhi Zhou

    2012-08-01

    Full Text Available While environmental engineering students have gained some knowledge of biogeochemical cycles and sewage treatment, most of them haven’t learned microbiology previously and usually have difficulty in learning environmental microbiology because microbiology deals with invisible living microorganisms instead of visible built environment. Many teaching techniques can be used to enhance students’ learning in microbiology courses, such as lectures, animations, videos, small-group discussions, and active learning techniques. All of these techniques have been applied in the engineering class, but the results indicate that these techniques are often inadequate for students. Learning difficulties have to be identified to enhance students’ learning.

  3. Software Engineering Team Project - lessons learned

    Directory of Open Access Journals (Sweden)

    Bogumiła Hnatkowska

    2013-06-01

    Full Text Available In the 2010/11 academic year the Institute of Informatics at Wroclaw University of Technology issued ’Software Engineering Team Project’ as a course being a part of the final exam to earn bachelor’s degree. The main assumption about the course was that it should simulate the real environment (a virtual IT company for its participants. The course was aimed to introduce issues regarding programming in the medium scale, project planning and management. It was a real challenge as the course was offered for more than 140 students. The number of staff members involved in its preparation and performance was more than 15. The paper presents the lessons learned from the first course edition as well as more detailed qualitative and quantitative course assessment.

  4. Learning Styles of Mexican Food Science and Engineering Students

    Science.gov (United States)

    Palou, Enrique

    2006-01-01

    People have different learning styles that are reflected in different academic strengths, weaknesses, skills, and interests. Given the almost unlimited variety of job descriptions within food science and engineering, it is safe to say that students with every possible learning style have the potential to succeed as food scientists and engineers.…

  5. 3D Game-Based Learning System for Improving Learning Achievement in Software Engineering Curriculum

    Science.gov (United States)

    Su,Chung-Ho; Cheng, Ching-Hsue

    2013-01-01

    The advancement of game-based learning has encouraged many related studies, such that students could better learn curriculum by 3-dimension virtual reality. To enhance software engineering learning, this paper develops a 3D game-based learning system to assist teaching and assess the students' motivation, satisfaction and learning achievement. A…

  6. Teaching Agile Software Engineering Using Problem-Based Learning

    Science.gov (United States)

    El-Khalili, Nuha H.

    2013-01-01

    Many studies have reported the utilization of Problem-Based Learning (PBL) in teaching Software Engineering courses. However, these studies have different views of the effectiveness of PBL. This paper presents the design of an Advanced Software Engineering course for undergraduate Software Engineering students that uses PBL to teach them Agile…

  7. Implementation of Process Oriented Guided Inquiry Learning (POGIL) in Engineering

    Science.gov (United States)

    Douglas, Elliot P.; Chiu, Chu-Chuan

    2013-01-01

    This paper describes implementation and testing of an active learning, team-based pedagogical approach to instruction in engineering. This pedagogy has been termed Process Oriented Guided Inquiry Learning (POGIL), and is based upon the learning cycle model. Rather than sitting in traditional lectures, students work in teams to complete worksheets…

  8. Teaching learning based optimization algorithm and its engineering applications

    CERN Document Server

    Rao, R Venkata

    2016-01-01

    Describing a new optimization algorithm, the “Teaching-Learning-Based Optimization (TLBO),” in a clear and lucid style, this book maximizes reader insights into how the TLBO algorithm can be used to solve continuous and discrete optimization problems involving single or multiple objectives. As the algorithm operates on the principle of teaching and learning, where teachers influence the quality of learners’ results, the elitist version of TLBO algorithm (ETLBO) is described along with applications of the TLBO algorithm in the fields of electrical engineering, mechanical design, thermal engineering, manufacturing engineering, civil engineering, structural engineering, computer engineering, electronics engineering, physics and biotechnology. The book offers a valuable resource for scientists, engineers and practitioners involved in the development and usage of advanced optimization algorithms.

  9. Applying machine learning methods for characterization of hexagonal prisms from their 2D scattering patterns - an investigation using modelled scattering data

    Science.gov (United States)

    Salawu, Emmanuel Oluwatobi; Hesse, Evelyn; Stopford, Chris; Davey, Neil; Sun, Yi

    2017-11-01

    Better understanding and characterization of cloud particles, whose properties and distributions affect climate and weather, are essential for the understanding of present climate and climate change. Since imaging cloud probes have limitations of optical resolution, especially for small particles (with diameter < 25 μm), instruments like the Small Ice Detector (SID) probes, which capture high-resolution spatial light scattering patterns from individual particles down to 1 μm in size, have been developed. In this work, we have proposed a method using Machine Learning techniques to estimate simulated particles' orientation-averaged projected sizes (PAD) and aspect ratio from their 2D scattering patterns. The two-dimensional light scattering patterns (2DLSP) of hexagonal prisms are computed using the Ray Tracing with Diffraction on Facets (RTDF) model. The 2DLSP cover the same angular range as the SID probes. We generated 2DLSP for 162 hexagonal prisms at 133 orientations for each. In a first step, the 2DLSP were transformed into rotation-invariant Zernike moments (ZMs), which are particularly suitable for analyses of pattern symmetry. Then we used ZMs, summed intensities, and root mean square contrast as inputs to the advanced Machine Learning methods. We created one random forests classifier for predicting prism orientation, 133 orientation-specific (OS) support vector classification models for predicting the prism aspect-ratios, 133 OS support vector regression models for estimating prism sizes, and another 133 OS Support Vector Regression (SVR) models for estimating the size PADs. We have achieved a high accuracy of 0.99 in predicting prism aspect ratios, and a low value of normalized mean square error of 0.004 for estimating the particle's size and size PADs.

  10. Building Management and ICT Learning in Civil Engineering Education

    DEFF Research Database (Denmark)

    Christiansson, Per Lennart

    2005-01-01

    The paper presents structures of the learning domains of building informatics exemplified with experiences from building management civil engineering and open education in Industrial IT at Aalborg University. The courses cover areas such as; object oriented programming and relational database...... design, human computer interface, user environment design and usability engineering, computer supported collaborative working, knowledge management, virtual buildings, intelligent buildings, and building systems simulation. Experiences from many years involvement in ICT supported learning and development...... taking into account improvement of learning styles, course content and learning material is also reported....

  11. CopperCore, an Open Source IMS Learning Design Engine

    NARCIS (Netherlands)

    Vogten, Hubert

    2004-01-01

    The presentation gives an overview of the approach of the development programme of the OTEC department towards the development of Open Source. The CopperCore IMS Learning Design engine is described as an example of this approach.

  12. Search engines that learn from their users

    NARCIS (Netherlands)

    Schuth, A.G.

    2016-01-01

    More than half the world’s population uses web search engines, resulting in over half a billion search queries every single day. For many people web search engines are among the first resources they go to when a question arises. Moreover, search engines have for many become the most trusted route to

  13. Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources

    OpenAIRE

    Penlington, Roger; Steiner, Simon

    2014-01-01

    This repository of teaching and learning resources is a companion to the 2nd edition of “An Introduction to Sustainable Development in the Engineering Curriculum”, by Roger Penlington and Simon Steiner, originally created by The Higher Education Academy Engineering Subject Centre, Loughborough University. \\ud The purpose of this collection of teaching and learning re-sources is to provide access, with a brief resumé, to materials in curricula reform, recognition awards, and university movemen...

  14. Learning Objectives for Master's theses at DTU Management Engineering

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Rasmussen, Birgitte; Hinz, Hector Nøhr

    2010-01-01

    , different. The DTU Study Handbook states that:”Learning objectives are an integrated part of the supervision”, which provides you with the opportunity – naturally in cooperation with your supervisor – to formulate learning objectives for your Master's thesis. There are at least three good reasons for being...... that you formulate precise and useful learning objectives for your Master's thesis. These notes of inspiration have been written to help you do exactly this. The notes discuss the requirements for the learning objectives, examples of learning objectives and the assessment criteria defined by DTU Management...... Engineering as well as, but not least, some useful things to remember concerning your submission and the assessment of the Master's thesis. DTU Management Engineering Claus Thorp Hansen Birgitte Rasmussen Hector Nøhr Hinz © DTU Management Engineering 2010 ISBN nr. 978-87-90855-94-7 This document...

  15. e-Learning in medical physics and engineering

    International Nuclear Information System (INIS)

    Stoeva, M.; Tabakov, S.; Lewis, C.; Tabakova, V.; Sprawls, P.; Milano, F.; Cvetkov, A.

    2012-01-01

    Full text: Introduction: e-Learning is among the contemporary methods for high quality knowledge exchange in various areas of medicine. Medical Physics/Engineering is one of the leading areas for creating e-content and practical application of e-Learning methods and curricula. Objectives: The objective of this abstract is to present the various e-Learning resources in the field of Medical Physics/Engineering and introduce some of the leading programs worldwide. Material and methods: e-Learning is applied at various levels in Medical Physics/Engineering. These versatile e-Learning methods use different approaches to deliver both general and high quality professional knowledge at virtually any point, thus increasing both the availability of the knowledge and quality of the results. Results and discussion: Medical Physics/ Engineering was among the first professions to develop and apply e-Learning - the Online Medical Physics resources, e-Encyclopaedia (www.emitel2. eu), EMERALD and EMIT materials and the Medical Physics Dictionary. An indicator for this is the first international prize in the field - EU Leonardo da Vinci Award and the increased popularity at all levels - local and international; students and professionals; medical physicists/engineers and other related specialties. Conclusion: The results so far present a solid background and show a perspective for development. Medical Physics/Engineering needs special forum to discuss regularly these questions and exchange expertise.

  16. The Role of Mathematics Learning Centres in Engineering Education.

    Science.gov (United States)

    Fuller, Milton

    2002-01-01

    Points out the diminishing demand for mathematics undergraduate programs and the strong trend in engineering education to make greater use of computer coursework such as Mathcad, Matlab, and other software systems for the mathematical and statistical components of engineering programs. Describes the changing role of mathematics learning centers…

  17. Problem-Based Learning in Engineering Ethics Courses

    Science.gov (United States)

    Kirkman, Robert

    2016-01-01

    I describe the first stages of a process of design research in which I employ problem-based learning in a course in engineering ethics, which fulfills a requirement for students in engineering degree programs. The aim of the course is to foster development of particular cognitive skills contributing to moral imagination, a capacity to notice,…

  18. Research and Practice of Active Learning in Engineering Education

    NARCIS (Netherlands)

    Graaf, de Erik; Saunders-Smits, Gillian; Nieweg, Michael

    2005-01-01

    Since 2001, the international network Active Learning in Engineering education (ALE) organized a series of international workshops on innovation of engineering education. The papers in this book are selected to reflect the state of the art, based on contributions to the 2005 ALE workshop in Holland.

  19. Creating Learning Environment Connecting Engineering Design and 3D Printing

    Science.gov (United States)

    Pikkarainen, Ari; Salminen, Antti; Piili, Heidi

    Engineering education in modern days require continuous development in didactics, pedagogics and used practical methods. 3D printing provides excellent opportunity to connect different engineering areas into practice and produce learning by doing applications. The 3D-printing technology used in this study is FDM (Fused deposition modeling). FDM is the most used 3D-printing technology by commercial numbers at the moment and the qualities of the technology makes it popular especially in academic environments. For achieving the best result possible, students will incorporate the principles of DFAM (Design for additive manufacturing) into their engineering design studies together with 3D printing. This paper presents a plan for creating learning environment for mechanical engineering students combining the aspects of engineering design, 3D-CAD learning and AM (additive manufacturing). As a result, process charts for carrying out the 3D printing process from technological point of view and design process for AM from engineering design point of view were created. These charts are used in engineering design education. The learning environment is developed to work also as a platform for Bachelor theses, work-training environment for students, prototyping service centre for cooperation partners and source of information for mechanical engineering education in Lapland University of Applied Sciences.

  20. Multiple Learning Strategies Project. Small Engine Repair. Visually Impaired.

    Science.gov (United States)

    Foster, Don; And Others

    This instructional package designed for visually impaired students, focuses on the vocational area of small engine repair. Contained in this document are forty learning modules organized into fourteen units: engine block; starters; fuel tank, lines, filters and pumps; carburetors; electrical; test equipment; motorcycle; machining; tune-ups; short…

  1. PERICLES 2D experiment

    International Nuclear Information System (INIS)

    Morel, Christophe

    2001-01-01

    Scope of the lecture was the modelling of severe reactor accidents. The PERICLES 2D experiment was compared to CATHARE 3D simulation results considering progression of a quench front inside the reactor core, steam flow rates, heat conduction, cladding temperature. (uke)

  2. Active Learning and Reflection in Product Development Engineering Education

    Science.gov (United States)

    Shekar, Aruna

    2007-01-01

    Traditional engineering courses at tertiary level have been traditionally theory-based, supported by laboratory work, but there is now a world-wide trend towards project-based learning. In product development education, project-based learning is essential in order to integrate the disciplines of design, marketing and manufacturing towards the…

  3. Scenario Based E-Learning in Electrical Engineering Education

    Science.gov (United States)

    Tambunan, Hamonangan; Dalimunte, Amirhud; Silitonga, Marsangkap

    2017-01-01

    The scenario based e-learning in Electrical Engineering Education Learning (EEEL) was developed by covering the scope and characteristics of all subjects and the competence unit of graduates in the field of pedagogy, professional, social and personality, with url addresed http://jpte-ft-unimed.edu20.org. The scenario incorporates the concept of…

  4. Innovative Assessment Paradigm to Enhance Student Learning in Engineering Education

    Science.gov (United States)

    El-Maaddawy, Tamer

    2017-01-01

    Incorporation of student self-assessment (SSA) in engineering education offers opportunities to support and encourage learner-led-learning. This paper presents an innovative assessment paradigm that integrates formative, summative, and SSA to enhance student learning. The assessment innovation was implemented in a senior-level civil engineering…

  5. Learning English: Experiences and Needs of Saudi Engineering Students

    Science.gov (United States)

    Unruh, Susan; Obeidat, Fayiz

    2015-01-01

    In this qualitative study, Saudi engineering students talk openly of their experiences learning English in the Kingdom of Saudi Arabia (KSA) and as university students in the United States (US). These students reported that they learned only the basics of vocabulary and grammar in KSA. Consequently, they came to the US with few English skills. In…

  6. An active learning organisation: teaching projects in electrical engineering education

    NARCIS (Netherlands)

    Christensen, H.-P.; Vos, Henk; de Graaff, E.; Lemoult, B.

    2004-01-01

    The introduction of active learning in engineering education is often started by enthusiastic teachers or change agents. They usually encounter resistance from stakeholders such as colleagues, department boards or students. For a successful introduction these stakeholders all have to learn what

  7. Head First 2D Geometry

    CERN Document Server

    Fallow), Stray

    2009-01-01

    Having trouble with geometry? Do Pi, The Pythagorean Theorem, and angle calculations just make your head spin? Relax. With Head First 2D Geometry, you'll master everything from triangles, quads and polygons to the time-saving secrets of similar and congruent angles -- and it'll be quick, painless, and fun. Through entertaining stories and practical examples from the world around you, this book takes you beyond boring problems. You'll actually use what you learn to make real-life decisions, like using angles and parallel lines to crack a mysterious CSI case. Put geometry to work for you, and

  8. ZnO Nanorods on a LaAlO 3 -SrTiO 3 Interface: Hybrid 1D-2D Diodes with Engineered Electronic Properties

    KAUST Repository

    Bera, Ashok

    2015-12-28

    Integrating nanomaterials with different dimensionalities and properties is a versatile approach toward realizing new functionalities in advanced devices. Here, a novel diode-type heterostructure is reported consisting of 1D semiconducting ZnO nanorods and 2D metallic LaAlO3-SrTiO3 interface. Tunable insulator-to-metal transitions, absent in the individual components, are observed as a result of the competing temperature-dependent conduction mechanisms. Detailed transport analysis reveals direct tunneling at low bias, Fowler-Nordheim tunneling at high forward bias, and Zener breakdown at high reverse bias. Our results highlight the rich electronic properties of such artificial diodes with hybrid dimensionalities, and the design principle may be generalized to other nanomaterials. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. ZnO Nanorods on a LaAlO 3 -SrTiO 3 Interface: Hybrid 1D-2D Diodes with Engineered Electronic Properties

    KAUST Repository

    Bera, Ashok; Lin, Weinan; Yao, Yingbang; Ding, Junfeng; Lourembam, James; Wu, Tao

    2015-01-01

    Integrating nanomaterials with different dimensionalities and properties is a versatile approach toward realizing new functionalities in advanced devices. Here, a novel diode-type heterostructure is reported consisting of 1D semiconducting ZnO nanorods and 2D metallic LaAlO3-SrTiO3 interface. Tunable insulator-to-metal transitions, absent in the individual components, are observed as a result of the competing temperature-dependent conduction mechanisms. Detailed transport analysis reveals direct tunneling at low bias, Fowler-Nordheim tunneling at high forward bias, and Zener breakdown at high reverse bias. Our results highlight the rich electronic properties of such artificial diodes with hybrid dimensionalities, and the design principle may be generalized to other nanomaterials. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Creating meaningful learning experiences: Understanding students' perspectives of engineering design

    Science.gov (United States)

    Aleong, Richard James Chung Mun

    There is a societal need for design education to prepare holistic engineers with the knowledge, skills, and attitudes to innovate and compete globally. Design skills are paramount to the espoused values of higher education, as institutions of higher learning strive to develop in students the cognitive abilities of critical thinking, problem solving, and creativity. To meet these interests from industry and academia, it is important to advance the teaching and learning of engineering design. This research aims to understand how engineering students learn and think about design, as a way for engineering educators to optimize instructional practice and curriculum development. Qualitative research methodology was used to investigate the meaning that engineering students' ascribe to engineering design. The recruitment of participants and corresponding collection of data occurred in two phases using two different data collection techniques. The first phase involved the distribution of a one-time online questionnaire to all first year, third year, and fourth year undergraduate engineering students at three Canadian Universities. After the questionnaire, students were asked if they would be willing to participate in the second phase of data collection consisting of a personal interview. A total of ten students participated in interviews. Qualitative data analysis procedures were conducted on students' responses from the questionnaire and interviews. The data analysis process consisted of two phases: a descriptive phase to code and categorize the data, followed by an interpretative phase to generate further meaning and relationships. The research findings present a conceptual understanding of students' descriptions about engineering design, structured within two educational orientations: a learning studies orientation and a curriculum studies orientation. The learning studies orientation captured three themes of students' understanding of engineering design: awareness

  11. Problem-based learning biotechnology courses in chemical engineering.

    Science.gov (United States)

    Glatz, Charles E; Gonzalez, Ramon; Huba, Mary E; Mallapragada, Surya K; Narasimhan, Balaji; Reilly, Peter J; Saunders, Kevin P; Shanks, Jacqueline V

    2006-01-01

    We have developed a series of upper undergraduate/graduate lecture and laboratory courses on biotechnological topics to supplement existing biochemical engineering, bioseparations, and biomedical engineering lecture courses. The laboratory courses are based on problem-based learning techniques, featuring two- and three-person teams, journaling, and performance rubrics for guidance and assessment. Participants initially have found them to be difficult, since they had little experience with problem-based learning. To increase enrollment, we are combining the laboratory courses into 2-credit groupings and allowing students to substitute one of them for the second of our 2-credit chemical engineering unit operations laboratory courses.

  12. Collaborative Learning at Engineering Universities: Benefits and Challenges

    OpenAIRE

    Olga V. Sumtsova; Tatiana Yu. Aikina; Liudmila M. Bolsunovskaya; Chris Phillips; Olga M. Zubkova; Peter J. Mitchell

    2018-01-01

    This paper concerns the cutting edge educational approaches incorporated into syllabuses of the most progressive Russian higher technical schools. The authors discuss one of the active methods in teaching foreign languages – collaborative learning implemented in e-courses. Theoretical and historical aspects of this approach are addressed, as are its suitability for engineering education and possible ways of introducing collaborative learning into e-courses. Collaborative learning technology o...

  13. Towards a Continuous Knowledge Learning Engine for Chatbots

    OpenAIRE

    Mazumder, Sahisnu; Ma, Nianzu; Liu, Bing

    2018-01-01

    Although chatbots have been very popular in recent years, they still have some serious weaknesses which limit the scope of their applications. One major weakness is that they cannot learn new knowledge during the conversation process, i.e., their knowledge is fixed beforehand and cannot be expanded or updated during conversation. In this paper, we propose to build a general knowledge learning engine for chatbots to enable them to continuously and interactively learn new knowledge during conve...

  14. Excellence in Mathematics, Science, and Engineering Education Act of 1990. Report To Accompany S. 2114. 101st Congress, 2d Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

    This document contains the transcript of a Senate hearing on the crisis in science and math education. The document includes mathematics, science, and engineering education; enhance the scientific and technical literacy of the U.S. public; stimulate the professional from the state of Oregon; Carl Sagan, Cornell women and minorities in careers in…

  15. Washington Schools Learn from Value Engineering.

    Science.gov (United States)

    Doleae, Michael L.; Childs, Harvey C.

    1983-01-01

    Results of two value engineering studies have shown that a review early in the design process can help save costs in school construction, maintenance, operation, and replacement. The value engineering concepts and technical manual are being presented throughout the state of Washington. (MLF)

  16. Engineering education and a lifetime of learning

    Science.gov (United States)

    Eisley, J. (Editor)

    1974-01-01

    The result of an eleven-week study by the National Aeronautics and Space Administration (NASA) and the American Society of Engineering Education is presented. The study was the ninth of a series of programs. The purposes of the programs were: (1) to introduce engineering school faculty members to system design and to a particular approach to teaching system design, (2) to introduce engineering faculty to NASA and to a specific NASA center, and (3) to produce a study of use to NASA and to the participants. The story was concerned with engineering education in the U.S., and concentrated upon undergraduate education and teaching, although this bias was not meant to imply that research and graduate study are less important to engineering education.

  17. Implementing Collaborative Learning across the Engineering Curriculum

    Science.gov (United States)

    Ralston, Patricia A. S.; Tretter, Thomas R.; Kendall-Brown, Marie

    2017-01-01

    Active and collaborative teaching methods increase student learning, and it is broadly accepted that almost any active or collaborative approach will improve learning outcomes as compared to lecture. Yet, large numbers of faculty have not embraced these methods. Thus, the challenge to encourage evidence-based change in teaching is not only how to…

  18. Crystal engineered acid–base complexes with 2D and 3D hydrogen bonding systems using p-hydroxybenzoic acid as the building block

    Directory of Open Access Journals (Sweden)

    PU SU ZHAO

    2010-04-01

    Full Text Available p-Hydroxybenzoic acid (p-HOBA was selected as the building block for self-assembly with five bases, i.e., diethylamine, tert-butylamine, cyclohexylamine, imidazole and piperazine, and generation of the corresponding acid–base complexes 1–5. Crystal structure analyses suggest that proton-transfer from the carboxyl hydrogen to the nitrogen atom of the bases can be observed in 1–4, while only in 5 does a solvent water molecule co-exist with p--HOBA and piperazine. With the presence of O–H···O hydrogen bonds in 1–4, the deprotonated p-hydroxybenzoate anions (p-HOBAA– are simply connected each other in a head-to-tail motif to form one-dimensional (1D arrays, which are further extended to distinct two-dimensional (2D (for 1 and 4 and three-dimensional (3D (for 2 and 3 networks via N–H···O interactions. While in 5, neutral acid and base are combined pair-wise by O–H···N and N–H···O bonds to form a 1D tape and then the 1D tapes are sequentially combined by water molecules to create a 3D network. Some interlayer or intralayer C–H···O, C–H···p and p×××p interactions help to stabilize the supramolecular buildings. Melting point determination analyses indicate that the five acid–base complexes are not the ordinary superposition of the reactants and they are more stable than the original reactants.

  19. Visual teaching and learning in the fields of engineering

    Directory of Open Access Journals (Sweden)

    Kyvete S. Shatri

    2015-11-01

    Full Text Available Engineering education today is faced with numerous demands that are closely connected with a globalized economy. One of these requirements is to draw the engineers of the future, who are characterized with: strong analytical skills, creativity, ingenuity, professionalism, intercultural communication and leadership. To achieve this effective teaching methods should be used to facilitate and enhance the learning of students and their performance in general, making them able to cope with market demands of a globalized economy. One of these methods is the visualization as a very important method that increases the learning of students. A visual approach in science and in engineering also increases communication, critical thinking and provides analytical approach to various problems. Therefore, this research is aimed to investigate the effect of the use of visualization in the process of teaching and learning in engineering fields and encourage teachers and students to use visual methods for teaching and learning. The results of this research highlight the positive effect that the use of visualization has in the learning process of students and their overall performance. In addition, innovative teaching methods have a good effect in the improvement of the situation. Visualization motivates students to learn, making them more cooperative and developing their communication skills.

  20. Enhancing learning in geosciences and water engineering via lab activities

    Science.gov (United States)

    Valyrakis, Manousos; Cheng, Ming

    2016-04-01

    This study focuses on the utilisation of lab based activities to enhance the learning experience of engineering students studying Water Engineering and Geosciences. In particular, the use of modern highly visual and tangible presentation techniques within an appropriate laboratory based space are used to introduce undergraduate students to advanced engineering concepts. A specific lab activity, namely "Flood-City", is presented as a case study to enhance the active engagement rate, improve the learning experience of the students and better achieve the intended learning objectives of the course within a broad context of the engineering and geosciences curriculum. Such activities, have been used over the last few years from the Water Engineering group @ Glasgow, with success for outreach purposes (e.g. Glasgow Science Festival and demos at the Glasgow Science Centre and Kelvingrove museum). The activity involves a specific setup of the demonstration flume in a sand-box configuration, with elements and activities designed so as to gamely the overall learning activity. Social media platforms can also be used effectively to the same goals, particularly in cases were the students already engage in these online media. To assess the effectiveness of this activity a purpose designed questionnaire is offered to the students. Specifically, the questionnaire covers several aspects that may affect student learning, performance and satisfaction, such as students' motivation, factors to effective learning (also assessed by follow-up quizzes), and methods of communication and assessment. The results, analysed to assess the effectiveness of the learning activity as the students perceive it, offer a promising potential for the use of such activities in outreach and learning.

  1. Teaching and Learning in Chemical Product Engineering - an Evolving par of the Chemical Engineering Curriculum

    DEFF Research Database (Denmark)

    Vigild, Martin Etchells; Kiil, Søren; Wesselingh, Johannes

    2007-01-01

    Over the last decade Chemical Product Engineering has evolved as part of the Chemical Engineering Curriculum at several universities in Europe and America. At the DTU Chemical Product Engineering was introduced in 2000. This presentation will report on the experiences gained from teaching classes...... and preparing a text book on the subject. [1] Chemical Product Engineering is solidly based on chemical technical and engineering knowledge. Furthermore, the subject naturally calls for a holistic approach to teaching and learning and introduces elements which target transferable and professional engineering...... skills. Such skills are important in Chemical Product Engineering when dealing with open-ended problems, creative problem solutions, operating in a team working environment and exercising project management. In our course we emphasise team activites, formative feed back to the students as well as helping...

  2. Learning in engineered multi-agent systems

    Science.gov (United States)

    Menon, Anup

    Consider the problem of maximizing the total power produced by a wind farm. Due to aerodynamic interactions between wind turbines, each turbine maximizing its individual power---as is the case in present-day wind farms---does not lead to optimal farm-level power capture. Further, there are no good models to capture the said aerodynamic interactions, rendering model based optimization techniques ineffective. Thus, model-free distributed algorithms are needed that help turbines adapt their power production on-line so as to maximize farm-level power capture. Motivated by such problems, the main focus of this dissertation is a distributed model-free optimization problem in the context of multi-agent systems. The set-up comprises of a fixed number of agents, each of which can pick an action and observe the value of its individual utility function. An individual's utility function may depend on the collective action taken by all agents. The exact functional form (or model) of the agent utility functions, however, are unknown; an agent can only measure the numeric value of its utility. The objective of the multi-agent system is to optimize the welfare function (i.e. sum of the individual utility functions). Such a collaborative task requires communications between agents and we allow for the possibility of such inter-agent communications. We also pay attention to the role played by the pattern of such information exchange on certain aspects of performance. We develop two algorithms to solve this problem. The first one, engineered Interactive Trial and Error Learning (eITEL) algorithm, is based on a line of work in the Learning in Games literature and applies when agent actions are drawn from finite sets. While in a model-free setting, we introduce a novel qualitative graph-theoretic framework to encode known directed interactions of the form "which agents' action affect which others' payoff" (interaction graph). We encode explicit inter-agent communications in a directed

  3. The application of learning skills in an engineering programme

    OpenAIRE

    Shoemaker, Leslie

    2006-01-01

    At the Dublin Institute of Technology, an engineering programme in the School of Control Systems and Electrical Engineering has successfully incorporated a study skills module into the core curriculum. The module, titled Academic Development and Key Skills, is part of the first year of the programme and has a two-fold purpose. Primarily the goal is to assist the students with the transition from second level education to third level by teaching them a more competent learning style. This, in t...

  4. Visual teaching and learning in the fields of engineering

    OpenAIRE

    Kyvete S. Shatri

    2015-01-01

    Engineering education today is faced with numerous demands that are closely connected with a globalized economy. One of these requirements is to draw the engineers of the future, who are characterized with: strong analytical skills, creativity, ingenuity, professionalism, intercultural communication and leadership. To achieve this effective teaching methods should be used to facilitate and enhance the learning of students and their performance in general, making them able to cope with market ...

  5. Creating a Learning Environment for Engineering Education

    DEFF Research Database (Denmark)

    Christensen, Hans Peter

    2004-01-01

    Until recently discussions about improvement of educational quality have focussed on the teacher – it was as-sumed that by training the teacher you could increase the students’ learning outcome. Realising that other changes than better teaching were necessary to give the students more useful......? And the introduction of IT has highlighted the importance of the learning environment, but the focus has narrowly been on the physical environment. However, the mental frame-work is also very important. To assure educational quality it is necessary to take all these elements into account and consider the total...

  6. Student Learning Projects in Electric Vehicle Engineering

    DEFF Research Database (Denmark)

    Ritchie, Ewen; Leban, Krisztina Monika

    2012-01-01

    This paper presents the didactic problem based learning method in general use at Aalborg University as applied to Electric Mobility. Advantage is taken of this method to link student learning to current research projects. This offers advantages to the students and the researchers. The paper...... introduces the subject, presents the research of the Department of Energy Technology and describes the relevant syllabus. It continues to present a range of titles of previous research linked student project projects, and to fill in some of the detail, an example of such a student project. The paper...

  7. Learning Technology and Engineering Principles through Golf

    Science.gov (United States)

    Yoshikawa, Emily; Bartholomew, Scott R.

    2018-01-01

    While the physical exercise of playing golf and the sheer enjoyment of the sport are both positive benefits, there are subtler opportunities for golf to be used in conjunction with other ideas for learning in K-12 education; the mechanics and details behind the sport, as well as the variety of clubs, courses, and swings are all potential…

  8. Unparticle Example in 2D

    International Nuclear Information System (INIS)

    Georgi, Howard; Kats, Yevgeny

    2008-01-01

    We discuss what can be learned about unparticle physics by studying simple quantum field theories in one space and one time dimension. We argue that the exactly soluble 2D theory of a massless fermion coupled to a massive vector boson, the Sommerfield model, is an interesting analog of a Banks-Zaks model, approaching a free theory at high energies and a scale-invariant theory with nontrivial anomalous dimensions at low energies. We construct a toy standard model coupling to the fermions in the Sommerfield model and study how the transition from unparticle behavior at low energies to free particle behavior at high energies manifests itself in interactions with the toy standard model particles

  9. Engineering Computer Games: A Parallel Learning Opportunity for Undergraduate Engineering and Primary (K-5 Students

    Directory of Open Access Journals (Sweden)

    Mark Michael Budnik

    2011-04-01

    Full Text Available In this paper, we present how our College of Engineering is developing a growing portfolio of engineering computer games as a parallel learning opportunity for undergraduate engineering and primary (grade K-5 students. Around the world, many schools provide secondary students (grade 6-12 with opportunities to pursue pre-engineering classes. However, by the time students reach this age, many of them have already determined their educational goals and preferred careers. Our College of Engineering is developing resources to provide primary students, still in their educational formative years, with opportunities to learn more about engineering. One of these resources is a library of engineering games targeted to the primary student population. The games are designed by sophomore students in our College of Engineering. During their Introduction to Computational Techniques course, the students use the LabVIEW environment to develop the games. This software provides a wealth of design resources for the novice programmer; using it to develop the games strengthens the undergraduates

  10. What Are the Perceptions of Lecturers towards Using Cooperative Learning in Civil Engineering?

    Science.gov (United States)

    Ahern, Aoife

    2007-01-01

    The objective of the current paper is to examine how group learning and cooperative learning are used in civil engineering courses. The paper defines group learning and cooperative learning in the first section. It is hypothesized that group learning is used in civil engineering courses to build teamwork skills and communication skills among civil…

  11. Design Learning of Teaching Factory in Mechanical Engineering

    Science.gov (United States)

    Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

    2018-02-01

    The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

  12. Improving Collaborative Learning in Online Software Engineering Education

    Science.gov (United States)

    Neill, Colin J.; DeFranco, Joanna F.; Sangwan, Raghvinder S.

    2017-01-01

    Team projects are commonplace in software engineering education. They address a key educational objective, provide students critical experience relevant to their future careers, allow instructors to set problems of greater scale and complexity than could be tackled individually, and are a vehicle for socially constructed learning. While all…

  13. The Difference Engine: Computing, Knowledge, and the Transformation of Learning

    Science.gov (United States)

    Provenzo, Eugene F.

    2011-01-01

    Since the 1960s, the rapid evolution of technology has created a new cultural geography--a virtual geography. "The Difference Engine: Computing, Knowledge and the Transformation of Learning" offers a conscious critique of this change and its effects on contemporary culture and education. This engaging text assumes that we are at a critical…

  14. Incorporating Learning Outcomes into an Introductory Geotechnical Engineering Course

    Science.gov (United States)

    Fiegel, Gregg L.

    2013-01-01

    The article describes the process of incorporating a set of learning outcomes into a geotechnical engineering course. The outcomes were developed using Bloom's taxonomy and define the knowledge, skills, and abilities the students are expected to achieve upon completion of the course. Each outcome begins with an action-oriented verb corresponding…

  15. Information Technologies in Higher Education: Lessons Learned in Industrial Engineering

    Science.gov (United States)

    Delgado-Almonte, Milagros; Andreu, Hernando Bustos; Pedraja-Rejas, Liliana

    2010-01-01

    This article describes a teaching experience in which information and communication technologies were applied in five industrial engineering courses at the Universidad de Tarapaca in Chile. The paper compares the performance and course pass rates of the e-learning platform and portable pocket PC platform with those of the same courses teaching in…

  16. teaching and learning methodologies in engineering education in ...

    African Journals Online (AJOL)

    Global Journal

    ENGINEERING EDUCATION IN NIGERIAN UNIVERSITIES. OGRI J. USHIE AND JULIE C. OGBULEZIE. (Received 20 February 2017; Revision Accepted 17 May 2016). ABSTRACT. The students' outcome in terms of quality of graduates as regard teaching and learning determines whether the existing methods should be ...

  17. Introduction to Problem Based Learning for Engineering Education

    DEFF Research Database (Denmark)

    Moesby, Egon; Rosenørn, Torben

    2003-01-01

    Documentation material and working papers for the workshop "Introduction to Problem Based Learning for Engineering Education" held at Chiang Mai University, Chiang Mai, Thailand, 6 - 10 October 2003. The material support the workshop where the participants go through a complete pre-planning cycle...

  18. Multiple Learning Strategies Project. Building Maintenance & Engineering. Visually Impaired.

    Science.gov (United States)

    Smith, Dwight; And Others

    This instructional package is designed for visually impaired students in the vocational area of building maintenance and engineering. The twenty-eight learning modules are organized into six units: floor care, general maintenance tasks; restrooms; carpet care; power and hand tools; and cabinet construction. Each module, printed in large block…

  19. An example of active learning in Aerospace Engineering

    NARCIS (Netherlands)

    Brugemann, V.P.; Brummelen, van E.H.; Melkert, J.A.; Kamp, A.; Saunders-Smits, G.N.; Reith, B.A.; Zandbergen, B.T.C.; Graaf, de E.; Saunders-Smits, G.N.; Nieweg, M.R.

    2005-01-01

    This paper is a showcase for an on-going active learning capstone design project in the BSe. programme at the Faculty of Aerospace Engineering at Delft University of Technology. In multi-disciplinary teams supervised by tutors from different backgrounds students work towards an Aerospace (related)

  20. IMPLEMENTATION OF TECHNOLOGY ENHANCED LEARNING PEDAGOGY AND IMPACT ON EMPLOYABILITY AND LEARNING WITHIN ENGINEERING EDUCATION FRAMEWORKS

    OpenAIRE

    Vickerstaff, Rebecca

    2015-01-01

    Engineering Education experiences turbulent changes, both from government pressures and from industry demands on readdressing the requirements of graduate capability. Despite vast amounts of engineering literature discussing ‘change’ within the field, engineering curricula still maintains its predominant pedagogic model of dissemination to students as it did in previous decades. Technology Enhanced Learning in education has created new and flexible options in the delivery and assessmen...

  1. Lessons Learned from Crowdsourcing Complex Engineering Tasks.

    Science.gov (United States)

    Staffelbach, Matthew; Sempolinski, Peter; Kijewski-Correa, Tracy; Thain, Douglas; Wei, Daniel; Kareem, Ahsan; Madey, Gregory

    2015-01-01

    Crowdsourcing is the practice of obtaining needed ideas, services, or content by requesting contributions from a large group of people. Amazon Mechanical Turk is a web marketplace for crowdsourcing microtasks, such as answering surveys and image tagging. We explored the limits of crowdsourcing by using Mechanical Turk for a more complicated task: analysis and creation of wind simulations. Our investigation examined the feasibility of using crowdsourcing for complex, highly technical tasks. This was done to determine if the benefits of crowdsourcing could be harnessed to accurately and effectively contribute to solving complex real world engineering problems. Of course, untrained crowds cannot be used as a mere substitute for trained expertise. Rather, we sought to understand how crowd workers can be used as a large pool of labor for a preliminary analysis of complex data. We compared the skill of the anonymous crowd workers from Amazon Mechanical Turk with that of civil engineering graduate students, making a first pass at analyzing wind simulation data. For the first phase, we posted analysis questions to Amazon crowd workers and to two groups of civil engineering graduate students. A second phase of our experiment instructed crowd workers and students to create simulations on our Virtual Wind Tunnel website to solve a more complex task. With a sufficiently comprehensive tutorial and compensation similar to typical crowd-sourcing wages, we were able to enlist crowd workers to effectively complete longer, more complex tasks with competence comparable to that of graduate students with more comprehensive, expert-level knowledge. Furthermore, more complex tasks require increased communication with the workers. As tasks become more complex, the employment relationship begins to become more akin to outsourcing than crowdsourcing. Through this investigation, we were able to stretch and explore the limits of crowdsourcing as a tool for solving complex problems.

  2. Content Production for E-Learning in Engineering

    Directory of Open Access Journals (Sweden)

    Andreas Auinger

    2007-06-01

    Full Text Available The didactic quality of lear0ning materialscan be improved by enriching learning material with didacticinformation. Such content elements assist selfdirectedlearning processes in virtual learningenvironments effectively. In order to develop didacticallymotivated for flexible use, e.g., at different terminaldevices such as PC or PDA, a structured procedure isrequired. We propose the selection and identification ofdidactically relevant information prior to enrichment ofhighly structured content with didactical information. Itcan be achieved by using the CoDEx method (ContentDidactically Explicit, and a mapping scheme to thelearning-technology standard conform XML contentstructures. Furthermore, aspects for multi-channel contentdelivery in the application field of engineering have to betaken into account. In this paper we refer to the objectivesand results of the EU-funded ELIE project (E-Learning InEngineering to demonstrate the proposed procedure’seffectiveness for content engineering.

  3. eLearning Hands-On: Blending Interactive eLearning with Practical Engineering Laboratory

    Science.gov (United States)

    Kiravu, Cheddi; Yanev, Kamen M.; Tunde, Moses O.; Jeffrey, Anna M.; Schoenian, Dirk; Renner, Ansel

    2016-01-01

    Purpose: Integrating laboratory work into interactive engineering eLearning contents augments theory with practice while simultaneously ameliorating the apparent theory-practice gap in traditional eLearning. The purpose of this paper is to assess and recommend media that currently fulfil this desirable dual pedagogical goal.…

  4. Implementation of Transformative Sustainability Learning into Engineering Curricular

    Directory of Open Access Journals (Sweden)

    Yuliana Lavrysh

    2018-04-01

    Full Text Available Nowadays an engineering profession is the most promising in terms of sustainability. Yet, there is a question if higher educational establishments are ready and possess necessary resources to prepare graduates in a sufficient way to create a life-sustainable future. Therefore, universities recognize the education for sustainable development as an essential and timely process of engineering training. The paper presents the characteristics of transformative sustainability learning as a key factor of advanced life-learning engineering education. The analysis of theoretical background signifies that the transformative sustainability learning concept is based on the theory of person’s transformations depending on such personality traits as the life experience, cognitive development, and critical reflection skills which foster personality changes towards sustainability. Thus, we can state that transformative sustainability learning (TSL integrates such fields as transformative learning and Education for Sustainable Development and the combination impacts personal and societal transformations. This fact provides us with the opportunity to suggest the (TSL concepts implementation into engineering educational process as an approach that enhances students’ motivation to studying, understanding of sustainability issues and high order thinking skills. If students experience personality transformations, we can find out the pedagogical strategy attributed to these transformations. Having conducted interviews and observations the teaching process at the university, we outlined the most used TSL pedagogical strategies at technical university (placed-based, problem-based, enquiry and service learning assessed their efficacy, found out the barriers to successful implementation and suggested recommendations to overcome the barriers. Our paper demonstrates potential of TSL implementation as it not only benefits for students but also enhances sustainability

  5. E-learning and blended learning in textile engineering education: a closed feedback loop approach

    Science.gov (United States)

    Charitopoulos, A.; Vassiliadis, S.; Rangoussi, M.; Koulouriotis, D.

    2017-10-01

    E-learning has gained a significant role in typical education and in professional training, thanks to the flexibility it offers to the time and location parameters of the education event framework. Purely e-learning scenarios are mostly limited either to Open University-type higher education institutions or to graduate level or professional degrees; blended learning scenarios are progressively becoming popular thanks to their balanced approach. The aim of the present work is to propose approaches that exploit the e-learning and the blended-learning scenarios for Textile Engineering education programmes, especially for multi-institutional ones. The “E-Team” European MSc degree programme organized by AUTEX is used as a case study. The proposed solution is based on (i) a free and open-source e-learning platform (moodle) and (ii) blended learning educational scenarios. Educational challenges addressed include student engagement, student error / failure handling, as well as collaborative learning promotion and support.

  6. Learning mathematics in students of Mechanical Engineering

    Directory of Open Access Journals (Sweden)

    Raquel Ramírez-Pedroso

    2016-07-01

    Full Text Available Mathematical discipline contributes to the development of logical and algorithmic thinking and provides the basics of a specialist in Technical Sciences, as every engineer considers technical and scientific representations in mathematical terms, with which reflects the quantitative and qualitative features of the phenomena studied . His goal is to make the engineer master the mathematical apparatus to do so able to model and analyze the technical, economic, productive and scientific processes using both, analytical methods and numerical. Interdisciplinarity is a current educational trend that puts in the center the comprehensive treatment of the complex processes of reality from the contribution of different disciplines and meet common objectives. It is necessary to address the issue of interdisciplinarity, from different points of view. Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  7. Engaging Community College Students Using an Engineering Learning Community

    Science.gov (United States)

    Maccariella, James, Jr.

    The study investigated whether community college engineering student success was tied to a learning community. Three separate data collection sources were utilized: surveys, interviews, and existing student records. Mann-Whitney tests were used to assess survey data, independent t-tests were used to examine pre-test data, and independent t-tests, analyses of covariance (ANCOVA), chi-square tests, and logistic regression were used to examine post-test data. The study found students that participated in the Engineering TLC program experienced a significant improvement in grade point values for one of the three post-test courses studied. In addition, the analysis revealed the odds of fall-to-spring retention were 5.02 times higher for students that participated in the Engineering TLC program, and the odds of graduating or transferring were 4.9 times higher for students that participated in the Engineering TLC program. However, when confounding variables were considered in the study (engineering major, age, Pell Grant participation, gender, ethnicity, and full-time/part-time status), the analyses revealed no significant relationship between participation in the Engineering TLC program and course success, fall-to-spring retention, and graduation/transfer. Thus, the confounding variables provided alternative explanations for results. The Engineering TLC program was also found to be effective in providing mentoring opportunities, engagement and motivation opportunities, improved self confidence, and a sense of community. It is believed the Engineering TLC program can serve as a model for other community college engineering programs, by striving to build a supportive environment, and provide guidance and encouragement throughout an engineering student's program of study.

  8. 2d index and surface operators

    International Nuclear Information System (INIS)

    Gadde, Abhijit; Gukov, Sergei

    2014-01-01

    In this paper we compute the superconformal index of 2d (2,2) supersymmetric gauge theories. The 2d superconformal index, a.k.a. flavored elliptic genus, is computed by a unitary matrix integral much like the matrix integral that computes the 4d superconformal index. We compute the 2d index explicitly for a number of examples. In the case of abelian gauge theories we see that the index is invariant under flop transition and under CY-LG correspondence. The index also provides a powerful check of the Seiberg-type duality for non-abelian gauge theories discovered by Hori and Tong. In the later half of the paper, we study half-BPS surface operators in N=2 superconformal gauge theories. They are engineered by coupling the 2d (2,2) supersymmetric gauge theory living on the support of the surface operator to the 4d N=2 theory, so that different realizations of the same surface operator with a given Levi type are related by a 2d analogue of the Seiberg duality. The index of this coupled system is computed by using the tools developed in the first half of the paper. The superconformal index in the presence of surface defect is expected to be invariant under generalized S-duality. We demonstrate that it is indeed the case. In doing so the Seiberg-type duality of the 2d theory plays an important role

  9. Becoming an engineer: Doctoral women's perspectives on identity and learning in the culture of engineering

    Science.gov (United States)

    Wood, Shaunda L.

    Women face many obstacles in their academic careers but there is a gap in the research with regards to their perceptions of science and engineering education and how non/participation in the culture of engineering affects their identities. Moreover, little research has been conducted with female Ph.D. students especially with regard to the reasons they have continued their studies, and their level of satisfaction with their career and lives. This study was guided by the sociocultural approach and theories of learning and identity. Methodologically, the design adopted is a naturalistic qualitative inquiry using two open-ended interviews with participant verification after the first interview. The life history narratives (Mishler, 1999) obtained from the seven doctoral electrical and mechanical women engineers, at various stages in their programs, were the primary source of data. By examining the path of becoming a doctoral woman engineer, this study makes the educational experiences of women intelligible to the general public as well as policy makers. It gives voice to the women engineers whose perspectives are rarely heard in academic settings or mainstream society. The findings of the study lend insight to the importance and necessity of more inclusive engineering education, incorporating not only women's studies courses into the curriculum but anti-racism education as well as including the perspective of 'Other' people of difference. Moreover, multi-perspective approaches to increasing enrolment and retention of women in engineering were more effective and in keeping with addressing notions of 'difference' in engineering populations.

  10. Activated sludge model No. 2d, ASM2d

    DEFF Research Database (Denmark)

    Henze, M.

    1999-01-01

    The Activated Sludge Model No. 2d (ASM2d) presents a model for biological phosphorus removal with simultaneous nitrification-denitrification in activated sludge systems. ASM2d is based on ASM2 and is expanded to include the denitrifying activity of the phosphorus accumulating organisms (PAOs......). This extension of ASM2 allows for improved modeling of the processes, especially with respect to the dynamics of nitrate and phosphate. (C) 1999 IAWQ Published by Elsevier Science Ltd. All rights reserved....

  11. A Differentiable Physics Engine for Deep Learning in Robotics

    OpenAIRE

    Degrave, Jonas; Hermans, Michiel; Dambre, Joni; wyffels, Francis

    2016-01-01

    One of the most important fields in robotics is the optimization of controllers. Currently, robots are treated as a black box in this optimization process, which is the reason why derivative-free optimization methods such as evolutionary algorithms or reinforcement learning are omnipresent. We propose an implementation of a modern physics engine, which has the ability to differentiate control parameters. This has been implemented on both CPU and GPU. We show how this speeds up the optimizatio...

  12. Heteronuclear 2D NMR studies on an engineered insulin monomer: Assignments and characterization of the receptor-binding surface by selective 2H and 13C labeling with application to protein design

    International Nuclear Information System (INIS)

    Weiss, M.A.; Hua, Qingxin; Lynch, C.S.; Shoelson, S.E.; Frank, B.H.

    1991-01-01

    Insulin provides an important model for the application of genetic engineering to rational protein design and has been well characterized in the crystal state. However, self-association of insulin in solution has precluded complementary 2D NMR study under physiological conditions. The authors demonstrate here that such limitations may be circumvented by the use of a monomeric analogue that contains three amino acid substitutions on the protein surface (HisB10 → Asp, ProB28 → Lys, and LysB29 → Pro); this analogue (designated DKP-insulin) retains native receptor-binding potency. Comparative 1 H NMR studies of native human insulin and a series of three related analogues-(i) the singly substituted analogue [HisB10→Asp], (ii) the doubly substituted analogue [ProB28→Lys; LysB29→Pro], and (iii) DKP-insulin-demonstrate progressive reduction in concentration-dependent line-broadening in accord with the results of analytical ultracentrifugation. Extensive nonlocal interactions are observed in the NOESY spectrum of DKP-insulin, indicating that this analogue adopts a compact and stably folded structure as a monomer in overall accord with crystal models. Site-specific 2 H and 13 C isotopic labels are introduced by semisynthesis as probes for the structure and dynamics of the receptor-binding surface. These studies confirm and extend under physiological conditions the results of a previous 2D NMR analysis of native insulin in 20% acetic acid. Implications for the role of protein flexibility in receptor recognition are discussed with application to the design of novel insulin analogues

  13. LEARNING MANAGEMENT SYSTEMS: ENGINEERING THE EDUCATION INDUSTRY TO EDUCATE THE INDUSTRIAL ENGINEER

    Directory of Open Access Journals (Sweden)

    L. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: A learning management system (LMS is any infrastructure on which e-learning can be built and delivered. In this article two sides of the LMS coin are investigated: On the one side, it is argued that industrial and systems engineering skills are equally relevant for learning systems as for as for any other system. To support this argument, an analogy is drawn between the management of learning systems and the management of manufacturing systems. On the other side of the coin, the educational issues and concerns related to implementing an LMS at the University of Pretoria are investigated by means of a case study in the Industrial Engineering department. It is concluded that the industrial engineering educator is in the unique position of understanding and contributing towards the engineering of the education industry whilst educating the industrial engineer.

    AFRIKAANSE OPSOMMING: ‘n Leerbestuurstelsel (LMS is enige infrastruktuur waarop e-leer gebou en afgelewer kan word. In hierdie artikel word beide kante van die LMS muntstuk ondersoek: Aan die een kant word getoon dat bedryfsingenieursvaardighede en -beginsels ewe toepaslik is op leerstelsels as op vervaardigingstelsels. Om hierdie argument te steun word 'n analogie getrek tussen the bestuur van leerstelsels en die bestuur van vervaardigingstelsels. Aan die ander kant van die muntstuk word die opvoedkundige aspekte verbonde aan die implementering van ‘n leerbestuurstelsel (LMS aan die Universiteit van Pretoria ondersoek aan die hand van ‘n gevallestudie in die Bedryfsingenieursdepartment. Die gevolgtrekking word gemaak dat die bedryfsingenieurs-opleier in 'n unieke posisie is om die opleidingsindustrie te begryp en by dra tot the ontwikkeling daarvan terwyl die bedryfsingenieur opgelei word.

  14. The Application of Problem-Based Learning in Mechanical Engineering

    Science.gov (United States)

    Putra, Z. A.; Dewi, M.

    2018-02-01

    The course of Technology and Material Testing prepare students with the ability to do a variety of material testing in the study of mechanical engineering. Students find it difficult to understand the materials to make them unable to carry out the material testing in accordance with the purpose of study. This happens because they knowledge is not adequately supported by the competence to find and construct learning experience. In this study, quasy experiment research method with pre-post-test with control group design was used. The subjects of the study were students divided in two groups; control and experiment with twenty-two students in each group. Study result: their grades showed no difference in between the pre-test or post-test in control group, but the difference in grade existed between the pre-test and post-test in experiment group. Yet, there is no significant difference in the study result on both groups. The researcher recommend that it is necessary to develop Problem-Based Learning that suits need analysis on D3 Program for Mechanical Engineering Department at the State University of Padang, to ensure the compatibility between Model of Study and problems and need. This study aims to analyze how Problem-Based Learning effects on the course of Technology and Material Testing for the students of D3 Program of Mechanical Engineering of the State University of Padang.

  15. Nonlinear machine learning in soft materials engineering and design

    Science.gov (United States)

    Ferguson, Andrew

    The inherently many-body nature of molecular folding and colloidal self-assembly makes it challenging to identify the underlying collective mechanisms and pathways governing system behavior, and has hindered rational design of soft materials with desired structure and function. Fundamentally, there exists a predictive gulf between the architecture and chemistry of individual molecules or colloids and the collective many-body thermodynamics and kinetics. Integrating machine learning techniques with statistical thermodynamics provides a means to bridge this divide and identify emergent folding pathways and self-assembly mechanisms from computer simulations or experimental particle tracking data. We will survey a few of our applications of this framework that illustrate the value of nonlinear machine learning in understanding and engineering soft materials: the non-equilibrium self-assembly of Janus colloids into pinwheels, clusters, and archipelagos; engineering reconfigurable ''digital colloids'' as a novel high-density information storage substrate; probing hierarchically self-assembling onjugated asphaltenes in crude oil; and determining macromolecular folding funnels from measurements of single experimental observables. We close with an outlook on the future of machine learning in soft materials engineering, and share some personal perspectives on working at this disciplinary intersection. We acknowledge support for this work from a National Science Foundation CAREER Award (Grant No. DMR-1350008) and the Donors of the American Chemical Society Petroleum Research Fund (ACS PRF #54240-DNI6).

  16. Business oriented educational experiments enhance active learning by engineering students

    DEFF Research Database (Denmark)

    Christiansen, Nynne Mia; Schjær-Jacobsen, Hans; Simon, Jens

    2012-01-01

    It is generally agreed that one of the keys to recreating industrial growth after the financial crisis is to mobilize universities and engineering schools to be more actively involved in innovation and entrepreneurship activities in cooperation with industrial companies. This active learning...... exploration symposium on bridging the gap between engineering education and business is proposed on the basis of the Copenhagen University College of Engineering (IHK) being involved in a DKK 50m ongoing project “Business Oriented Educational Experiments” financed by the Capital Region of Denmark...... and the European Social Fund. The project is carried out with other major educational institutions in the Copenhagen area and organized in five themes: 1) world class competences, 2) new interactions between education and business, 3) the experimenting organization, 4) education on demand, and 5) new career paths...

  17. Dopamine D1/D5, but not D2/D3, receptor dependency of synaptic plasticity at hippocampal mossy fiber synapses that is enabled by patterned afferent stimulation, or spatial learning

    Directory of Open Access Journals (Sweden)

    Hardy Hagena

    2016-09-01

    Full Text Available Although the mossy fiber (MF synapses of the hippocampal CA3 region display quite distinct properties in terms of the molecular mechanisms that underlie synaptic plasticity, they nonetheless exhibit persistent (>24h synaptic plasticity that is akin to that observed at the Schaffer collateral (SCH-CA1 and perforant path (PP-dentate gyrus (DG synapses of freely behaving rats. In addition, they also respond to novel spatial learning with very enduring forms of long-term potentiation (LTP and long-term depression (LTD. These latter forms of synaptic plasticity are directly related to the learning behavior: novel exploration of generalized changes in space facilitates the expression of LTP at MF-CA3 synapses, whereas exploration of novel configurations of large environmental features facilitates the expression of LTD. In the absence of spatial novelty, synaptic plasticity is not expressed. Motivation is a potent determinant of whether learning about spatial experience effectively occurs and the neuromodulator dopamine plays a key role in motivation-based learning. Prior research on the regulation by dopamine receptors of long-term synaptic plasticity in CA1 and dentate gyrus synapses in vivo suggests that whereas D2/D3 receptors may modulate a general predisposition toward expressing plasticity, D1/D5 receptors may directly regulate the direction of change in synaptic strength that occurs during learning. Although the CA3 region is believed to play a pivotal role in many forms of learning, the role of these receptors in persistent (>24h forms of synaptic plasticity at MF-CA3 synapses is unknown. Here, we report that whereas pharmacological antagonism of D2/D3 receptors had no impact on LTP or LTD, antagonism of D1/D5 receptors significantly impaired LTP and LTD that were induced by solely by means of patterned afferent stimulation, or LTP/LTD that are typically enhanced by the conjunction of afferent stimulation and novel spatial learning. These data

  18. Can we (control) Engineer the degree learning process?

    Science.gov (United States)

    White, A. S.; Censlive, M.; Neilsen, D.

    2014-07-01

    This paper investigates how control theory could be applied to learning processes in engineering education. The initial point for the analysis is White's Double Loop learning model of human automation control modified for the education process where a set of governing principals is chosen, probably by the course designer. After initial training the student decides unknowingly on a mental map or model. After observing how the real world is behaving, a strategy to achieve the governing variables is chosen and a set of actions chosen. This may not be a conscious operation, it maybe completely instinctive. These actions will cause some consequences but not until a certain time delay. The current model is compared with the work of Hollenbeck on goal setting, Nelson's model of self-regulation and that of Abdulwahed, Nagy and Blanchard at Loughborough who investigated control methods applied to the learning process.

  19. Can we (control) Engineer the degree learning process?

    International Nuclear Information System (INIS)

    White, A S; Censlive, M; Neilsen, D

    2014-01-01

    This paper investigates how control theory could be applied to learning processes in engineering education. The initial point for the analysis is White's Double Loop learning model of human automation control modified for the education process where a set of governing principals is chosen, probably by the course designer. After initial training the student decides unknowingly on a mental map or model. After observing how the real world is behaving, a strategy to achieve the governing variables is chosen and a set of actions chosen. This may not be a conscious operation, it maybe completely instinctive. These actions will cause some consequences but not until a certain time delay. The current model is compared with the work of Hollenbeck on goal setting, Nelson's model of self-regulation and that of Abdulwahed, Nagy and Blanchard at Loughborough who investigated control methods applied to the learning process

  20. Active learning increases student performance in science, engineering, and mathematics.

    Science.gov (United States)

    Freeman, Scott; Eddy, Sarah L; McDonough, Miles; Smith, Michelle K; Okoroafor, Nnadozie; Jordt, Hannah; Wenderoth, Mary Pat

    2014-06-10

    To test the hypothesis that lecturing maximizes learning and course performance, we metaanalyzed 225 studies that reported data on examination scores or failure rates when comparing student performance in undergraduate science, technology, engineering, and mathematics (STEM) courses under traditional lecturing versus active learning. The effect sizes indicate that on average, student performance on examinations and concept inventories increased by 0.47 SDs under active learning (n = 158 studies), and that the odds ratio for failing was 1.95 under traditional lecturing (n = 67 studies). These results indicate that average examination scores improved by about 6% in active learning sections, and that students in classes with traditional lecturing were 1.5 times more likely to fail than were students in classes with active learning. Heterogeneity analyses indicated that both results hold across the STEM disciplines, that active learning increases scores on concept inventories more than on course examinations, and that active learning appears effective across all class sizes--although the greatest effects are in small (n ≤ 50) classes. Trim and fill analyses and fail-safe n calculations suggest that the results are not due to publication bias. The results also appear robust to variation in the methodological rigor of the included studies, based on the quality of controls over student quality and instructor identity. This is the largest and most comprehensive metaanalysis of undergraduate STEM education published to date. The results raise questions about the continued use of traditional lecturing as a control in research studies, and support active learning as the preferred, empirically validated teaching practice in regular classrooms.

  1. Development of a problem - based learning (PBL) and cooperative learning (CL) transportation engineering course For undergraduate students.

    Science.gov (United States)

    2008-08-01

    This study reports the findings of a project that was done during the implementation of a : problem-based learning (PBL) and cooperative learning (CL) elements into an : undergraduate transportation engineering course. The study procedure used the st...

  2. Engineering education 4.0 excellent teaching and learning in engineering sciences

    CERN Document Server

    Meisen, Tobias; Richert, Anja; Petermann, Marcus; Jeschke, Sabina; Wilkesmann, Uwe; Tekkaya, A

    2016-01-01

    This book presents a collection of results from the interdisciplinary research project “ELLI” published by researchers at RWTH Aachen University, the TU Dortmund and Ruhr-Universität Bochum between 2011 and 2016. All contributions showcase essential research results, concepts and innovative teaching methods to improve engineering education. Further, they focus on a variety of areas, including virtual and remote teaching and learning environments, student mobility, support throughout the student lifecycle, and the cultivation of interdisciplinary skills. .

  3. Encouraging the learning of hydraulic engineering subjects in agricultural engineering schools

    Science.gov (United States)

    Rodríguez Sinobas, Leonor; Sánchez Calvo, Raúl

    2014-09-01

    Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of 'online' and web tools in two undergraduate courses. Results from their application to encourage learning and communication skills in Hydraulic Engineering subjects are analysed and compared to the initial situation. Student's academic performance has improved since their application, but surveys made among students showed that not all the methodological proposals were perceived as beneficial. Their participation in the 'online', classroom and reading activities was low although they were well assessed.

  4. Machine learning and data science in soft materials engineering.

    Science.gov (United States)

    Ferguson, Andrew L

    2018-01-31

    In many branches of materials science it is now routine to generate data sets of such large size and dimensionality that conventional methods of analysis fail. Paradigms and tools from data science and machine learning can provide scalable approaches to identify and extract trends and patterns within voluminous data sets, perform guided traversals of high-dimensional phase spaces, and furnish data-driven strategies for inverse materials design. This topical review provides an accessible introduction to machine learning tools in the context of soft and biological materials by 'de-jargonizing' data science terminology, presenting a taxonomy of machine learning techniques, and surveying the mathematical underpinnings and software implementations of popular tools, including principal component analysis, independent component analysis, diffusion maps, support vector machines, and relative entropy. We present illustrative examples of machine learning applications in soft matter, including inverse design of self-assembling materials, nonlinear learning of protein folding landscapes, high-throughput antimicrobial peptide design, and data-driven materials design engines. We close with an outlook on the challenges and opportunities for the field.

  5. Machine learning and data science in soft materials engineering

    Science.gov (United States)

    Ferguson, Andrew L.

    2018-01-01

    In many branches of materials science it is now routine to generate data sets of such large size and dimensionality that conventional methods of analysis fail. Paradigms and tools from data science and machine learning can provide scalable approaches to identify and extract trends and patterns within voluminous data sets, perform guided traversals of high-dimensional phase spaces, and furnish data-driven strategies for inverse materials design. This topical review provides an accessible introduction to machine learning tools in the context of soft and biological materials by ‘de-jargonizing’ data science terminology, presenting a taxonomy of machine learning techniques, and surveying the mathematical underpinnings and software implementations of popular tools, including principal component analysis, independent component analysis, diffusion maps, support vector machines, and relative entropy. We present illustrative examples of machine learning applications in soft matter, including inverse design of self-assembling materials, nonlinear learning of protein folding landscapes, high-throughput antimicrobial peptide design, and data-driven materials design engines. We close with an outlook on the challenges and opportunities for the field.

  6. Collaborative Learning at Engineering Universities: Benefits and Challenges

    Directory of Open Access Journals (Sweden)

    Olga V. Sumtsova

    2018-01-01

    Full Text Available This paper concerns the cutting edge educational approaches incorporated into syllabuses of the most progressive Russian higher technical schools. The authors discuss one of the active methods in teaching foreign languages – collaborative learning implemented in e-courses. Theoretical and historical aspects of this approach are addressed, as are its suitability for engineering education and possible ways of introducing collaborative learning into e-courses. Collaborative learning technology offers wide prospects for teachers of foreign languages as it enables the use of various patterns of interaction, promotes discussion, opinion exchange, peer assessment and building an e-learning community, fosters the development of e-culture and netiquette, and prepares future specialists for work in their professional sphere under the new conditions imposed by society’s technological and cultural development. This paper describes real pedagogical experience of teaching English to students using the platform Moodle, focusing on the capacity of different Moodle instruments for designing group work tasks. Recommendations are given for their usage and the results of implementing a collaborative learning approach into certain e-courses offered at Tomsk Polytechnic University (TPU are presented.

  7. Gendered practices of constructing an engineering identity in a problem-based learning environment

    DEFF Research Database (Denmark)

    Du, Xiangyun

    2006-01-01

    of an engineering identity with masculinity and the culturally defined engineering competencies leads to different learning experiences for male and female students. The nature of hard-core engineering subjects, based on male interests, privileges men and acts as a barrier to women. The masculine culture......This article examines the learning experiences of engineering students of both genders in a problem-based and project-organized learning environment (PBL) at a Danish university. This study relates an amalgam of theories on learning and gender to the context of engineering education. Based on data...

  8. Lectures on 2D gravity and 2D string theory

    International Nuclear Information System (INIS)

    Ginsparg, P.; Moore, G.

    1992-01-01

    This report the following topics: loops and states in conformal field theory; brief review of the Liouville theory; 2D Euclidean quantum gravity I: path integral approach; 2D Euclidean quantum gravity II: canonical approach; states in 2D string theory; matrix model technology I: method of orthogonal polynomials; matrix model technology II: loops on the lattice; matrix model technology III: free fermions from the lattice; loops and states in matrix model quantum gravity; loops and states in the C=1 matrix model; 6V model fermi sea dynamics and collective field theory; and string scattering in two spacetime dimensions

  9. Teaching-Learning-Based Optimization with Learning Enthusiasm Mechanism and Its Application in Chemical Engineering

    Directory of Open Access Journals (Sweden)

    Xu Chen

    2018-01-01

    Full Text Available Teaching-learning-based optimization (TLBO is a population-based metaheuristic search algorithm inspired by the teaching and learning process in a classroom. It has been successfully applied to many scientific and engineering applications in the past few years. In the basic TLBO and most of its variants, all the learners have the same probability of getting knowledge from others. However, in the real world, learners are different, and each learner’s learning enthusiasm is not the same, resulting in different probabilities of acquiring knowledge. Motivated by this phenomenon, this study introduces a learning enthusiasm mechanism into the basic TLBO and proposes a learning enthusiasm based TLBO (LebTLBO. In the LebTLBO, learners with good grades have high learning enthusiasm, and they have large probabilities of acquiring knowledge from others; by contrast, learners with bad grades have low learning enthusiasm, and they have relative small probabilities of acquiring knowledge from others. In addition, a poor student tutoring phase is introduced to improve the quality of the poor learners. The proposed method is evaluated on the CEC2014 benchmark functions, and the computational results demonstrate that it offers promising results compared with other efficient TLBO and non-TLBO algorithms. Finally, LebTLBO is applied to solve three optimal control problems in chemical engineering, and the competitive results show its potential for real-world problems.

  10. Circumvention of Learning Increases Intoxication Efficacy of Nematicidal Engineered Bacteria.

    Science.gov (United States)

    Bracho, Olena R; Manchery, Cyril; Haskell, Evan C; Blanar, Christopher A; Smith, Robert P

    2016-03-18

    Synthetic biology holds promise to engineer systems to treat diseases. One critical, yet underexplored, facet of designing such systems is the interplay between the system and the pathogen. Understanding this interplay may be critical to increasing efficacy and overcoming resistance against the system. Using the principles of synthetic biology, we engineer a strain of Escherichia coli to attract and intoxicate the nematode Caenorhabditis elegans. Our bacteria are engineered with a toxin module, which intoxicates the nematode upon ingestion, and an attraction module, which serves to attract and increase the feeding rate of the nematodes. When independently implemented, these modules successfully intoxicate and attract the worms, respectively. However, in combination, the efficacy of our bacteria is significantly reduced due to aversive associative learning in C. elegans. Guided by mathematical modeling, we dynamically regulate module induction to increase intoxication by circumventing learning. Our results detail the creation of a novel nematicidal bacterium that may have application against nematodes, unravel unique constraints on circuit dynamics that are governed by C. elegans physiology, and add to the growing list of design and implementation considerations associated with synthetic biology.

  11. Virtual Chemical Engineering: Guidelines for E-Learning in Engineering Education

    Directory of Open Access Journals (Sweden)

    Damian Schofield

    2010-11-01

    Full Text Available Advanced three-dimensional virtual environment technology, similar to that used by the film and computer games industry can allow educational developers to rapidly create realistic three-dimensional, virtual environments. This technology has been used to generate a range of interactive learning environments across a broad spectrum of industries.The paper will discuss the implementation of these systems and extrapolate the lessons learnt into general guidelines to be considered for the development of a range of educational learning resources. These guidelines will then be discussed in the context of the development of ViRILE (Virtual Reality Interactive Learning Environment, software which simulates the configuration and operation of a polymerisation plant. This software package has been developed for use by undergraduate chemical engineers at the University of Nottingham.

  12. The Philosophical and Pedagogical Underpinnings of Active Learning in Engineering Education

    Science.gov (United States)

    Christie, Michael; de Graaff, Erik

    2017-01-01

    In this paper the authors draw on three sequential keynote addresses that they gave at Active Learning in Engineering Education (ALE) workshops in Copenhagen (2012), Caxias do Sol (2014) and San Sebastian (2015). Active Learning in Engineering Education is an informal international network of engineering educators dedicated to improving…

  13. Distance Learning and Skill Acquisition in Engineering Sciences: Present State and Prospects

    Science.gov (United States)

    Potkonjak, Veljko; Jovanovic, Kosta; Holland, Owen; Uhomoibhi, James

    2013-01-01

    Purpose: The purpose of this paper is to present an improved concept of software-based laboratory exercises, namely a Virtual Laboratory for Engineering Sciences (VLES). Design/methodology/approach: The implementation of distance learning and e-learning in engineering sciences (such as Mechanical and Electrical Engineering) is still far behind…

  14. The Effect of Case Teaching on Meaningful and Retentive Learning When Studying Genetic Engineering

    Science.gov (United States)

    Güccük, Ahmet; Köksal, Mustafa Serdar

    2017-01-01

    The purpose of this study is to investigate the effects of case teaching on how students learn about genetic engineering, in terms of meaningful learning and retention of learning. The study was designed as quasi-experimental research including 63 8th graders (28 boys and 35 girls). To collect data, genetic engineering achievement tests were…

  15. Evaluation of an intelligent open learning system for engineering education

    Directory of Open Access Journals (Sweden)

    Maria Samarakou

    2016-09-01

    Full Text Available In computer-assisted education, the continuous monitoring and assessment of the learner is crucial for the delivery of personalized education to be effective. In this paper, we present a pilot application of the Student Diagnosis, Assistance, Evaluation System based on Artificial Intelligence (StuDiAsE, an open learning system for unattended student diagnosis, assistance and evaluation based on artificial intelligence. The system demonstrated in this paper has been designed with engineering students in mind and is capable of monitoring their comprehension, assessing their prior knowledge, building individual learner profiles, providing personalized assistance and, finally, evaluating a learner's performance both quantitatively and qualitatively by means of artificial intelligence techniques. The architecture and user interface of the system are being exhibited, the results and feedback received from a pilot application of the system within a theoretical engineering course are being demonstrated and the outcomes are being discussed.

  16. Active learning about research methodology in engineering education

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    Research methodology and theory of science have become important teaching subjects en engineering education as well as in higher education in general. This is rooted in the transition to a knowledge society. Today, it is argued by many that we are well on the way to an era beyond modernity...... of science if often not favored subjects by engineering students, who tend to find the subjects abstract. Thus, the students are often very engaged in the subjects, nor are textbooks or teaching very engaging. This poster asks how we can promote active learning in research methodology and theory of science...... and the sort of industrial economy that came with it. Whatever else the new era brings – the globalization of risks, environmental problems, new technologies, etc. – knowledge and the ability to seek, produce, apply and transform knowledge is of huge importance. However, research methodology and theory...

  17. 2D-hahmoanimaation toteuttamistekniikat

    OpenAIRE

    Smolander, Aku

    2009-01-01

    Opinnäytetyössä tutkitaan erilaisia 2D-hahmoanimaation toteuttamistekniikoita. Aluksi luodaan yleiskatsaus animoinnin historiaan ja tekniikoihin piirtämisestä mallintamiseen. Alkukatsauksen jälkeen tutkitaan 2D-hahmon suunnittelua ja liikkeitä koskevia sääntöjä. Hahmoanimaation liikkeissä huomionarvoisia asioita ovat muun muassa ajastus, liioittelu, ennakointi ja painovoima. Seuraavaksi perehdytään itse 2D-hahmoanimaation toteuttamistekniikoihin. Tavoitteena on selvittää, tutkia ja vertailla ...

  18. Effectiveness of E-Learning for Students Vocational High School Building Engineering Program

    Science.gov (United States)

    Soeparno; Muslim, Supari

    2018-04-01

    Implementation of vocational learning in accordance with the 2013 curriculum must meet the criteria, one of which is learning to be consistent with advances in technology and information. Technology-based learning in vocational commonly referred to as E-Learning, online (in the network) and WBL (Web-Based Learning). Facts on the ground indicate that based learning technology and information on Vocational High School of Building Engineering is still not going well. The purpose of this research is to know: advantages and disadvantages of learning with E-Learning, conformity of learning with E-Learning with characteristics of students on Vocational High School of Building Engineering and effective learning method based on E-Learning for students on Vocational High School of Building Engineering. Research done by literature method, get the following conclusion as follow: the advantages of E-Learning is learning can be done anywhere and anytime, efficient in accessing materials and tasks, ease of communication and discussion; while the shortage is the need for additional costs for good internet access and lack of social interaction between teachers and students. E-learning is appropriate to basic knowledge competencies, and not appropriate at the level of advanced competencies and skills. Effective E-Learning Based Learning Method on Vocational High School of Building Engineering is a Blended method that is a mix between conventional method and e-learning.

  19. The Theory of Planned Behaviour Applied to Search Engines as a Learning Tool

    Science.gov (United States)

    Liaw, Shu-Sheng

    2004-01-01

    Search engines have been developed for helping learners to seek online information. Based on theory of planned behaviour approach, this research intends to investigate the behaviour of using search engines as a learning tool. After factor analysis, the results suggest that perceived satisfaction of search engine, search engines as an information…

  20. Elements of learning technologies designing of engineering networks heat

    Directory of Open Access Journals (Sweden)

    Sidorkina Irina G.

    2016-01-01

    Full Text Available Modern educational systems function as a medium fast analysis of shared information that defines them as analytical. The purpose of analytical information processing systems: working with distributed data on a global computer networks, mining and processing of semi structured information, knowledge. Existing mathematical and heuristic methods for the automated synthesis of electronic courses and their corresponding algorithms do not allow the full compliance of development realized in the form of adequate criteria for the totality of the properties distributed educational systems within acceptable time limits and characteristic. Therefore, the development of electronic educational applications must be accompanied by a variety of software support intelligent and adaptive functions. In addition, there is no theoretical justification for integrative aspects and their practical applications for intelligent and adaptive systems of designing distance learning courses. Currently, this type of problem may be considered as a potentially promising. The article presents the functionality of the e-learning course on the design engineering of thermal networks, process modeling in engineering networks with the solution of energy efficiency, detection of problem areas; identify the irrational layout of heaters and others.

  1. HypGrid2D. A 2-d mesh generator

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, N N

    1998-03-01

    The implementation of a hyperbolic mesh generation procedure, based on an equation for orthogonality and an equation for the cell face area is described. The method is fast, robust and gives meshes with good smoothness and orthogonality. The procedure is implemented in a program called HypGrid2D. The HypGrid2D program is capable of generating C-, O- and `H`-meshes for use in connection with the EllipSys2D Navier-Stokes solver. To illustrate the capabilities of the program, some test examples are shown. First a series of C-meshes are generated around a NACA-0012 airfoil. Secondly a series of O-meshes are generated around a NACA-65-418 airfoil. Finally `H`-meshes are generated over a Gaussian hill and a linear escarpment. (au)

  2. Outcomes-Based Assessment and Learning: Trialling Change in a Postgraduate Civil Engineering Course

    Science.gov (United States)

    El-Maaddawy, Tamer; Deneen, Christopher

    2017-01-01

    This paper aims to demonstrate how assessment tasks can function within an outcomes-based learning framework to evaluate student attainment of learning outcomes. An outcomes-based learning framework designed to integrate teaching, learning, and assessment activities was developed and implemented in a civil engineering master-level course. The…

  3. Integrating E-Learning and Classroom Learning for Engineering Quality Control unit - Curtin University Experience

    Directory of Open Access Journals (Sweden)

    Ali M. Darabi Golshani

    2011-08-01

    Full Text Available Engineering employers expect engineering graduates to possess a wide range of skills that goes beyond their technical knowledge. It is vital that graduates have skills which demonstrate that they are responsible for their own development and careers. Some of these skills include; communication abilities, organizational skills, self-promotion, the ability to work as part of a team, be an effective problem solver, be a critical thinker, have good negotiation skills, have the ability to be a leader and being able to network effectively. Department of Civil Engineering at Curtin University of Technology in Perth, Australia offers a Master of Engineering Management degree for Engineers from various disciplines. One of the units taught in this Master degree program is Engineering Quality Control. It was decided to incorporate these non-technical skills in this unit by using an e-learning platform (Blackboard together with an adaptation of the Seven Principles of Good Practice and Dr Meredith Belbin’s team role theory to divide participants into groups. At the end of the unit, most of the participants were showing improvements in their non-technical skills.

  4. Learning intervention and the approach to study of engineering undergraduates

    Science.gov (United States)

    Solomonides, Ian Paul

    The aim of the research was to: investigate the effect of a learning intervention on the Approach to Study of first year engineering degree students. The learning intervention was a local programme of learning to learn' workshops designed and facilitated by the author. The primary aim of these was to develop students' Approaches to Study. Fifty-three first year engineering undergraduates at The Nottingham Trent University participated in the workshops. Approaches to Study were quantified using data obtained from the Revised Approach to Study Inventory (RASI) which was also subjected to a validity and reliability study using local data. Quantitative outcomes were supplemented using a qualitative analysis of essays written by students during the workshops. These were analysed for detail regarding student Approach to Study. It was intended that any findings would inform the local system of Engineering Education, although more general findings also emerged, in particular in relation to the utility of the research instrument. It was concluded that the intervention did not promote the preferential Deep Approach and did not affect Approaches to Study generally as measured by the RASI. This concurred with previous attempts to change student Approaches to Study at the group level. It was also established that subsequent years of the Integrated Engineering degree course are associated with progressively deteriorating Approaches to Study. Students who were exposed to the intervention followed a similar pattern of deteriorating Approaches suggesting that the local course context and its demands had a greater influence over the Approach of students than the intervention did. It was found that academic outcomes were unrelated to the extent to which students took a Deep Approach to the local assessment demands. There appeared therefore to be a mis-match between the Approach students adopted to pass examinations and those that are required for high quality learning outcomes. It is

  5. Realistic and efficient 2D crack simulation

    Science.gov (United States)

    Yadegar, Jacob; Liu, Xiaoqing; Singh, Abhishek

    2010-04-01

    Although numerical algorithms for 2D crack simulation have been studied in Modeling and Simulation (M&S) and computer graphics for decades, realism and computational efficiency are still major challenges. In this paper, we introduce a high-fidelity, scalable, adaptive and efficient/runtime 2D crack/fracture simulation system by applying the mathematically elegant Peano-Cesaro triangular meshing/remeshing technique to model the generation of shards/fragments. The recursive fractal sweep associated with the Peano-Cesaro triangulation provides efficient local multi-resolution refinement to any level-of-detail. The generated binary decomposition tree also provides efficient neighbor retrieval mechanism used for mesh element splitting and merging with minimal memory requirements essential for realistic 2D fragment formation. Upon load impact/contact/penetration, a number of factors including impact angle, impact energy, and material properties are all taken into account to produce the criteria of crack initialization, propagation, and termination leading to realistic fractal-like rubble/fragments formation. The aforementioned parameters are used as variables of probabilistic models of cracks/shards formation, making the proposed solution highly adaptive by allowing machine learning mechanisms learn the optimal values for the variables/parameters based on prior benchmark data generated by off-line physics based simulation solutions that produce accurate fractures/shards though at highly non-real time paste. Crack/fracture simulation has been conducted on various load impacts with different initial locations at various impulse scales. The simulation results demonstrate that the proposed system has the capability to realistically and efficiently simulate 2D crack phenomena (such as window shattering and shards generation) with diverse potentials in military and civil M&S applications such as training and mission planning.

  6. Horns Rev II, 2-D Model Tests

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Frigaard, Peter

    This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), on behalf of Energy E2 A/S part of DONG Energy A/S, Denmark. The objective of the tests was: to investigate the combined influence of the pile...... diameter to water depth ratio and the wave hight to water depth ratio on wave run-up of piles. The measurements should be used to design access platforms on piles....

  7. Virtual Reality in Engineering Education: The Future of Creative Learning

    Directory of Open Access Journals (Sweden)

    Abdul-Hadi Ghazi Abulrub

    2011-12-01

    Full Text Available Virtual reality has achieved an adequate level of development for it to be considered in innovative applications such as education, training, and research in higher education. Virtual reality offers both opportunities and challenges for the educational sector. One of the challenges of virtual reality technology is the costs associated which have been unaffordable for educational institutes. However, in recent years, computer hardware and software development has made it more feasible to incorporate virtual reality technology into future teaching strategies. Despite the cost challenges, educational benefits of implementing virtual reality remain compelling. This paper explains virtual reality principle and describes the interactive educational environment developed at WMG, the University of Warwick. It also discusses the benefits of using state-of-the-art 3D photorealistic interactive and immersive virtual environment for engineering undergraduates and postgraduate teaching, learning and training.

  8. Encouraging Deep Approach to Learning in Civil and Geodetic Engineering

    Directory of Open Access Journals (Sweden)

    Gašper Mrak

    2016-10-01

    Full Text Available This paper presents activities and changes applied to the teaching process within selected courses offered by Faculty of civil and geodetic engineering, University of Ljubljana, Slovenia. Theoretical background, evaluated from the point of the technical education needs, is presented. It can be seen that special focus has to be made to the students' motivation for deep learning which guarantees optimal balance between acquisition of concepts and skills, information processing and integration of fragmented pieces of knowledge into complex structures. Three case studies used to test theoretical points of departure are presented. Results of the introduced novelties and changes have been evaluated through the assessment of knowledge, students' satisfaction and teaching staff evaluations. For conclusive results, monitoring over a longer period of time should be conducted.

  9. Machine learning, medical diagnosis, and biomedical engineering research - commentary.

    Science.gov (United States)

    Foster, Kenneth R; Koprowski, Robert; Skufca, Joseph D

    2014-07-05

    A large number of papers are appearing in the biomedical engineering literature that describe the use of machine learning techniques to develop classifiers for detection or diagnosis of disease. However, the usefulness of this approach in developing clinically validated diagnostic techniques so far has been limited and the methods are prone to overfitting and other problems which may not be immediately apparent to the investigators. This commentary is intended to help sensitize investigators as well as readers and reviewers of papers to some potential pitfalls in the development of classifiers, and suggests steps that researchers can take to help avoid these problems. Building classifiers should be viewed not simply as an add-on statistical analysis, but as part and parcel of the experimental process. Validation of classifiers for diagnostic applications should be considered as part of a much larger process of establishing the clinical validity of the diagnostic technique.

  10. SES2D user's manual

    International Nuclear Information System (INIS)

    Johnson, J.D.; Lyon, S.P.

    1982-04-01

    SES2D is an interactive graphics code designed to generate plots of equation of state data from the Los Alamos National Laboratory Group T-4 computer libraries. This manual discusses the capabilities of the code. It describes the prompts and commands and illustrates their use with a sample run

  11. An Innovative Improvement of Engineering Learning System Using Computational Fluid Dynamics Concept

    Science.gov (United States)

    Hung, T. C.; Wang, S. K.; Tai, S. W.; Hung, C. T.

    2007-01-01

    An innovative concept of an electronic learning system has been established in an attempt to achieve a technology that provides engineering students with an instructive and affordable framework for learning engineering-related courses. This system utilizes an existing Computational Fluid Dynamics (CFD) package, Active Server Pages programming,…

  12. Linked-Class Problem-Based Learning in Engineering: Method and Evaluation

    Science.gov (United States)

    Hunt, Emily M.; Lockwood-Cooke, Pamela; Kelley, Judy

    2010-01-01

    Problem-Based Learning (PBL) is a problem-centered teaching method with exciting potential in engineering education for motivating and enhancing student learning. Implementation of PBL in engineering education has the potential to bridge the gap between theory and practice. Two common problems are encountered when attempting to integrate PBL into…

  13. An Investigation of First-Year Engineering Student and Instructor Perspectives of Learning Analytics Approaches

    Science.gov (United States)

    Knight, David B.; Brozina, Cory; Novoselich, Brian

    2016-01-01

    This paper investigates how first-year engineering undergraduates and their instructors describe the potential for learning analytics approaches to contribute to student success. Results of qualitative data collection in a first-year engineering course indicated that both students and instructors\temphasized a preference for learning analytics…

  14. A Learning Style Comparison between Synchronous Online and Face-to-Face Engineering Graphics Instruction

    Science.gov (United States)

    Goodridge, Wade H.; Lawanto, Oenardi; Santoso, Harry B.

    2017-01-01

    The implementation of a successful engineering program to a synchronous online curriculum is subject to many impacting factors. One such factor, that has not seen much investigation, concerns learning styles. Student learning styles may have a dramatic influence on the success of a synchronous online deliverable engineering graphics curriculum.…

  15. A Reactive Blended Learning Proposal for an Introductory Control Engineering Course

    Science.gov (United States)

    Mendez, Juan A.; Gonzalez, Evelio J.

    2010-01-01

    As it happens in other fields of engineering, blended learning is widely used to teach process control topics. In this paper, the inclusion of a reactive element--a Fuzzy Logic based controller--is proposed for a blended learning approach in an introductory control engineering course. This controller has been designed in order to regulate the…

  16. High-Quality Learning Environments for Engineering Design: Using Tablet PCs and Guidelines from Research on How People Learn

    OpenAIRE

    Enrique Palou; Lourdes Gazca; Juan Antonio Díaz García; José Andrés Rojas Lobato; Luis Geraldo Guerrero Ojeda; José Francisco Tamborero Arnal; María Teresa Jiménez Munguía; Aurelio López-Malo; Juan Manuel Garibay

    2012-01-01

    A team of several faculty members and graduate students at Universidad de las Amricas Puebla is improving engineering design teaching and learning by creating richer learning environments that promote an interactive classroom while integrating formative assessment into classroom practices by means of Tablet PCs and associated technologies. Learning environments that are knowledge-, learner-, community-, and assessment-centered as highlighted by the How People Learn framework, have been devel...

  17. Improving collaborative learning in online software engineering education

    Science.gov (United States)

    Neill, Colin J.; DeFranco, Joanna F.; Sangwan, Raghvinder S.

    2017-11-01

    Team projects are commonplace in software engineering education. They address a key educational objective, provide students critical experience relevant to their future careers, allow instructors to set problems of greater scale and complexity than could be tackled individually, and are a vehicle for socially constructed learning. While all student teams experience challenges, those in fully online programmes must also deal with remote working, asynchronous coordination, and computer-mediated communications all of which contribute to greater social distance between team members. We have developed a facilitation framework to aid team collaboration and have demonstrated its efficacy, in prior research, with respect to team performance and outcomes. Those studies indicated, however, that despite experiencing improved project outcomes, students working in effective software engineering teams did not experience significantly improved individual achievement. To address this deficiency we implemented theoretically grounded refinements to the collaboration model based upon peer-tutoring research. Our results indicate a modest, but statistically significant (p = .08), improvement in individual achievement using this refined model.

  18. Software Engineering and eLearning: The MuSofT Project - www.musoft.org

    Directory of Open Access Journals (Sweden)

    Ernst-Erich Doberkat

    2005-12-01

    Full Text Available eLearning supports the education in certain disciplines. Here, we report about novel eLearning concepts, techniques, and tools to support education in Software Engineering, a subdiscipline of computer science. We call this "Software Engineering eLearning". On the other side, software support is a substantial prerequisite for eLearning in any discipline. Thus, Software Engineering techniques have to be applied to develop and maintain those software systems. We call this "eLearning Software Engineering". Both aspects have been investigated in a large joint, BMBF-funded research project, termed MuSofT (Multimedia in Software Engineering. The main results are summarized in this paper.

  19. Experiential learning in control systems laboratories and engineering project management

    Science.gov (United States)

    Reck, Rebecca Marie

    2015, a panel of 40 control systems faculty members, from a variety of institutions, completed a multi-round Delphi survey in order to bring them toward consensus on the common aspects of their laboratories. The following winter, 45 additional faculty members and practitioners from the control systems community completed a follow-up survey to gather feedback on the results of the Delphi survey. During the Delphi study, the panelists identified 15 laboratory objectives, 26 concepts, and 15 components that were common in their laboratories. Then in both the Delphi survey and follow-up survey each participant rated the importance of each of these items. While the average ratings differed slightly between the two groups, the order of each set of items was compared with two different tests and the order was found to be similar. Some of the common and important learning objectives include connecting theory to what is implemented and observed in the laboratory, designing controllers, and modeling and simulating systems. The most common component in both groups was Math-Works software. Some of the common concepts include block diagrams, stability, and PID control. Defining common aspects of undergraduate control systems laboratories enables common development, detailed comparisons, and simplified adaptation of equipment and experiments between campuses and programs. Throughout an undergraduate program in engineering, there are multiple opportunities for hands-on laboratory experiences that are related to course content. However, a similarly immersive experience for project management graduate students is harder to incorporate for all students in a course at once. This study explores an experiential learning opportunity for graduate students in engineering management or project management programs. The project management students enroll in a project management course. Undergraduate students interested in working on a project with a real customer enroll in a different projects

  20. Engineering Education Tool for Distance Telephone Traffic Learning Through Web

    Directory of Open Access Journals (Sweden)

    Leonimer Flávio de Melo

    2012-11-01

    Full Text Available This work subject focuses in distance learning (DL modality by the Internet. The use of calculators and simulators software introduces a high level of interactivity in DL systems, such as Matlab software proposed by using in this work. The use of efficient mathematical packages and hypermedia technologies opens the door to a new paradigm of teaching and learning in the dawn of this new millennium. The use of hypertext, graphics, animation, audio, video, efficient calculators and simulators incorporating artificial intelligence techniques and the advance in the broadband networks will pave the way to this new horizon. The contribution of this work, besides the Matlab Web integration, is the developing of an introductory course in traffic engineering in hypertext format. Also, calculators to the most employed expressions of traffic analysis were developed to the Matlab server environment. By the use of the telephone traffic calculator, the user inputs data on his or her Internet browser and the systems returns numerical data, graphics and tables in HTML pages. The system is also very useful for Professional traffic calculations, replacing with advantages the use of the traditional methods by means of static tables and graphics in paper format.

  1. 3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

    Science.gov (United States)

    Rodenbough, Philip P.; Vanti, William B.; Chan, Siu-Wai

    2015-01-01

    Introductory materials science and engineering courses universally include the study of crystal structure and unit cells, which are by their nature highly visual 3D concepts. Traditionally, such topics are explored with 2D drawings or perhaps a limited set of difficult-to-construct 3D models. The rise of 3D printing, coupled with the wealth of…

  2. The Engineering Design Process: Conceptions along the Learning-To-Teach Continuum

    Science.gov (United States)

    Iveland, Ashley

    2017-01-01

    In this study, I sought to identify differences in the views and understandings of engineering design among individuals along the learning-to-teach continuum. To do so, I conducted a comprehensive review of literature to determine the various aspects of engineering design described in the fields of professional engineering and engineering…

  3. A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

    Science.gov (United States)

    Ahern, A. A.

    2010-01-01

    This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

  4. Six Aerospace design projects to learn how to engineer

    NARCIS (Netherlands)

    Kamp, A.

    2013-01-01

    Tomorrow’s engineers are required to have a good balance of deep working knowledge of engineering sciences and engineering skills. In the Bachelor in Aerospace Engineering at TU Delft, students are educated to master these competences so that they are ready to engineer when they graduate. The

  5. Development Of Entrepreneur Learning Model Based On Problem Based Learning To Increase Competency Independence And Creativity Students Of Industrial Engineering

    Directory of Open Access Journals (Sweden)

    Leola Dewiyani

    2017-10-01

    Full Text Available Currently it is undeniable that the competition to get a job is very tight and of course universities have an important role in printing human resources that can compete globally not least with the Department of Industrial Engineering Faculty of Engineering Muhammadiyah University of Jakarta FT UMJ. Problems that occur is based on the analysis obtained from the track record of graduates researchers found that 60 percent of students of Industrial Engineering FT UMJ work not in accordance with the level of education owned so financially their income is still below the standard. This study aims to improve the competence of students of Industrial Engineering Department FT UMJ in entrepreneurship courses especially through the development of Problem Based Learning based learning model. Specific targets of this research were conducted with the aim to identify and analyze the need to implement learning model based on Problem Based Learning Entrepreneurship and to design and develop the model of entrepreneurship based on Problem Based Learning to improve the competence independence and creativity of Industrial Engineering students of FT UMJ in Entrepreneurship course. To achieve the above objectives this research uses research and development R amp D method. The product produced in this research is the detail of learning model of entrepreneurial model based on Problem Based Learning entrepreneurship model based on Problem Based Learning and international journals

  6. The philosophical and pedagogical underpinnings of Active Learning in Engineering Education

    Science.gov (United States)

    Christie, Michael; de Graaff, Erik

    2017-01-01

    In this paper the authors draw on three sequential keynote addresses that they gave at Active Learning in Engineering Education (ALE) workshops in Copenhagen (2012), Caxias do Sol (2014) and San Sebastian (2015). Active Learning in Engineering Education is an informal international network of engineering educators dedicated to improving engineering education through active learning (http://www.ale-net.org/). The paper reiterates themes from those keynotes, namely, the philosophical and pedagogical underpinnings of Active Learning in Engineering Education, the scholarly questions that inspire engineering educators to go on improving their practice and exemplary models designed to activate the learning of engineering students. This paper aims to uncover the bedrock of established educational philosophies and theories that define and support active learning. The paper does not claim to present any new or innovative educational theory. There is already a surfeit of them. Rather, the aim is to assist Engineering Educators who wish to research how they can best activate the learning of their students by providing a readable, reasonable and solid underpinning for best practice in this field.

  7. Computational 2D Materials Database

    DEFF Research Database (Denmark)

    Rasmussen, Filip Anselm; Thygesen, Kristian Sommer

    2015-01-01

    We present a comprehensive first-principles study of the electronic structure of 51 semiconducting monolayer transition-metal dichalcogenides and -oxides in the 2H and 1T hexagonal phases. The quasiparticle (QP) band structures with spin-orbit coupling are calculated in the G(0)W(0) approximation...... and used as input to a 2D hydrogenic model to estimate exciton binding energies. Throughout the paper we focus on trends and correlations in the electronic structure rather than detailed analysis of specific materials. All the computed data is available in an open database......., and comparison is made with different density functional theory descriptions. Pitfalls related to the convergence of GW calculations for two-dimensional (2D) materials are discussed together with possible solutions. The monolayer band edge positions relative to vacuum are used to estimate the band alignment...

  8. The Use of Engineering Design Concept for Computer Programming Course: A Model of Blended Learning Environment

    Science.gov (United States)

    Tritrakan, Kasame; Kidrakarn, Pachoen; Asanok, Manit

    2016-01-01

    The aim of this research is to develop a learning model which blends factors from learning environment and engineering design concept for learning in computer programming course. The usage of the model was also analyzed. This study presents the design, implementation, and evaluation of the model. The research methodology is divided into three…

  9. Characterizing Engineering Learners' Preferences for Active and Passive Learning Methods

    Science.gov (United States)

    Magana, Alejandra J.; Vieira, Camilo; Boutin, Mireille

    2018-01-01

    This paper studies electrical engineering learners' preferences for learning methods with various degrees of activity. Less active learning methods such as homework and peer reviews are investigated, as well as a newly introduced very active (constructive) learning method called "slectures," and some others. The results suggest that…

  10. Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

    Science.gov (United States)

    Luo, Yi

    2015-01-01

    This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

  11. Towards characterising design-based learning in engineering education : a review of the literature

    NARCIS (Netherlands)

    Gomez Puente, S.M.; Eijck, van M.W.; Jochems, W.M.G.

    2011-01-01

    Design-based learning is a teaching approach akin to problem-based learning but one to which the design of artefacts, systems and solutions in project-based settings is central. Although design-based learning has been employed in the practice of higher engineering education, it has hardly been

  12. Spatial Visualization Learning in Engineering: Traditional Methods vs. a Web-Based Tool

    Science.gov (United States)

    Pedrosa, Carlos Melgosa; Barbero, Basilio Ramos; Miguel, Arturo Román

    2014-01-01

    This study compares an interactive learning manager for graphic engineering to develop spatial vision (ILMAGE_SV) to traditional methods. ILMAGE_SV is an asynchronous web-based learning tool that allows the manipulation of objects with a 3D viewer, self-evaluation, and continuous assessment. In addition, student learning may be monitored, which…

  13. Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

    Science.gov (United States)

    Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

    2016-01-01

    Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

  14. A Study of Trial and Error Learning in Technology, Engineering, and Design Education

    Science.gov (United States)

    Franzen, Marissa Marie Sloan

    2016-01-01

    The purpose of this research study was to determine if trial and error learning was an effective, practical, and efficient learning method for Technology, Engineering, and Design Education students at the post-secondary level. A mixed methods explanatory research design was used to measure the viability of the learning source. The study sample was…

  15. Learning analytics for smart campus: Data on academic performances of engineering undergraduates in Nigerian private university

    Directory of Open Access Journals (Sweden)

    Segun I. Popoola

    2018-04-01

    Full Text Available Empirical measurement, monitoring, analysis, and reporting of learning outcomes in higher institutions of developing countries may lead to sustainable education in the region. In this data article, data about the academic performances of undergraduates that studied engineering programs at Covenant University, Nigeria are presented and analyzed. A total population sample of 1841 undergraduates that studied Chemical Engineering (CHE, Civil Engineering (CVE, Computer Engineering (CEN, Electrical and Electronics Engineering (EEE, Information and Communication Engineering (ICE, Mechanical Engineering (MEE, and Petroleum Engineering (PET within the year range of 2002–2014 are randomly selected. For the five-year study period of engineering program, Grade Point Average (GPA and its cumulative value of each of the sample were obtained from the Department of Student Records and Academic Affairs. In order to encourage evidence-based research in learning analytics, detailed datasets are made publicly available in a Microsoft Excel spreadsheet file attached to this article. Descriptive statistics and frequency distributions of the academic performance data are presented in tables and graphs for easy data interpretations. In addition, one-way Analysis of Variance (ANOVA and multiple comparison post-hoc tests are performed to determine whether the variations in the academic performances are significant across the seven engineering programs. The data provided in this article will assist the global educational research community and regional policy makers to understand and optimize the learning environment towards the realization of smart campuses and sustainable education. Keywords: Smart campus, Learning analytics, Sustainable education, Nigerian university, Education data mining, Engineering

  16. VERTICAL ACTIVITY ESTIMATION USING 2D RADAR

    African Journals Online (AJOL)

    hennie

    estimates on aircraft vertical behaviour from a single 2D radar track. ... Fortunately, the problem of detecting relative vertical motion using a single 2D ..... awareness tools in scenarios where aerial activity sensing is typically limited to 2D.

  17. How to Learn Multidisciplinary Design: Biomedical Engineering in Cross Cultural Seminar

    OpenAIRE

    Shigehiro Hashimoto

    2016-01-01

    The way to learn multidisciplinary design has been discussed. "Biomedical engineering" is exemplified for multidisciplinary field. "Biomedical Engineering" makes the multidisciplinary research area, which includes biology, medicine, engineering, and others. The cross-cultural student seminars on biomedical engineering have been exemplified as the case studies. In the group work, students are divided into the small cross cultural groups. Each group finds a problem, methods to solve the problem...

  18. Using iPad-Based Mobile Learning to Teach Creative Engineering within a Problem-Based Learning Pedagogy

    Science.gov (United States)

    Li, Yulong; Wang, Lixun

    2018-01-01

    This case study, noting the increasing interest in iPad-based mobile learning research and aware of the current dearth of engineering talent in the UK, aims to contribute to a still sparse area of research that links iPad use to engineering education. To achieve this, the study investigates the integration of iPad-based mobile learning…

  19. Self-Regulated Learning Strategies of Engineering College Students While Learning Electric Circuit Concepts with Enhanced Guided Notes

    Science.gov (United States)

    Lawanto, Oenardi; Santoso, Harry

    2013-01-01

    The current study evaluated engineering college students' self-regulated learning (SRL) strategies while learning electric circuit concepts using enhanced guided notes (EGN). Our goal was to describe how students exercise SRL strategies and how their grade performance changes after using EGN. Two research questions guided the study: (1) To what…

  20. Effects of Cooperative Learning Plus Inquiry Method on Student Learning and Attitudes: A Comparative Study for Engineering Economic Classrooms

    Science.gov (United States)

    Salehizadeh, M. Reza; Behin-Aein, Noureddin

    2014-01-01

    In the Iranian higher education system, including engineering education, effective implementation of cooperative learning is difficult because classrooms are usually crowded and the students never had a formal group working background in their previous education. In order to achieve the benefits of cooperative learning in this condition, this…

  1. Memetic Engineering as a Basis for Learning in Robotic Communities

    Science.gov (United States)

    Truszkowski, Walter F.; Rouff, Christopher; Akhavannik, Mohammad H.

    2014-01-01

    This paper represents a new contribution to the growing literature on memes. While most memetic thought has been focused on its implications on humans, this paper speculates on the role that memetics can have on robotic communities. Though speculative, the concepts are based on proven advanced multi agent technology work done at NASA - Goddard Space Flight Center and Lockheed Martin. The paper is composed of the following sections : 1) An introductory section which gently leads the reader into the realm of memes. 2) A section on memetic engineering which addresses some of the central issues with robotic learning via memes. 3) A section on related work which very concisely identifies three other areas of memetic applications, i.e., news, psychology, and the study of human behaviors. 4) A section which discusses the proposed approach for realizing memetic behaviors in robots and robotic communities. 5) A section which presents an exploration scenario for a community of robots working on Mars. 6) A final section which discusses future research which will be required to realize a comprehensive science of robotic memetics.

  2. An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

    Directory of Open Access Journals (Sweden)

    Kumar Yelamarthi

    2016-12-01

    Full Text Available Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically enhance traditional flipped methodologies in a first-year engineering course, by using low-cost technology aids and proven pedagogical techniques to enhance student learning. Implemented in a first-year engineering course, this modified flipped model demonstrated an improved student awareness of essential engineering concepts and improved academic performance through collaborative and active learning activities, including flipped learning methodologies, without the need for expensive, formal active learning spaces. These findings have been validated through two studies and have shown similar results confirming that student learning is improved by the implementation of multi-pedagogical strategies in-formed by the use of an instructional design in a traditional classroom setting.

  3. Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

    OpenAIRE

    Sackey, S. M.; Bester, A.; Adams, D.

    2017-01-01

    To manage the impact of Industry 4.0 on industrial engineering (IE) education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE...

  4. Design of digital learning material for bioprocess-engineering-education

    NARCIS (Netherlands)

    Schaaf, van der H.

    2007-01-01

    With the advance of computers and the internet, new types of learning material can be developed: web-based digital learning material. Because many complex learning objectives in the food- and bioprocess technology domain are difficult to achieve in a traditional learning environment, a project was

  5. Analysing learning outcomes in an Electrical Engineering curriculum using illustrative verbs derived from Bloom's Taxonomy

    Science.gov (United States)

    Meda, Lawrence; Swart, Arthur James

    2018-05-01

    Learning outcomes are essential to any curriculum in education, where they need to be clear, observable and measurable. However, some academics structure learning outcomes in a way that does not promote student learning. The purpose of this article is to present the analyses of learning outcomes of an Electrical Engineering curriculum offered at a University of Technology in South Africa, in order to determine if academics are structuring them in a way that enables student learning. A qualitative case study is used where the learning outcomes from 33 study guides are reviewed using illustrative verbs derived from Bloom's Taxonomy. Results indicate that 9% of all the learning outcomes are unclear, 10% are unobservable and 23% are unmeasurable. A key recommendation is to provide regular workshops to assist academics in reviewing their learning outcomes using the illustrative verbs derived from Bloom's Taxonomy, thereby ensuring that their learning outcomes promote student learning.

  6. Selected engagement factors and academic learning outcomes of undergraduate engineering students

    Science.gov (United States)

    Justice, Patricia J.

    The concept of student engagement and its relationship to successful student performance and learning outcomes has a long history in higher education (Kuh, 2007). Attention to faculty and student engagement has only recently become of interest to the engineering education community. This interest can be attributed to long-standing research by George Kuh's, National Survey of Student Engagement (NSSE) at the Indiana University Center for Postsecondary Research. In addition, research projects sponsored by the National Science Foundation, the Academic Pathway Study (APS) at the Center for the Advancement of Engineering Education (CAEE) and the Center for the Advancement of Scholarship on Engineering Education (CASEE), Measuring Student and Faculty Engagement in Engineering Education, at the National Academy of Engineering. These research studies utilized the framework and data from the Engineering Change study by the Center for the Study of Higher Education, Pennsylvania State, that evaluated the impact of the new Accreditation Board of Engineering and Technology (ABET) EC2000 "3a through k" criteria identify 11 learning outcomes expected of engineering graduates. The purpose of this study was to explore the extent selected engagement factors of 1. institution, 2. social, 3. cognitive, 4. finance, and 5. technology influence undergraduate engineering students and quality student learning outcomes. Through the descriptive statistical analysis indicates that there maybe problems in the engineering program. This researcher would have expected at least 50% of the students to fall in the Strongly Agree and Agree categories. The data indicated that the there maybe problems in the engineering program problems in the data. The problems found ranked in this order: 1). Dissatisfaction with faculty instruction methods and quality of instruction and not a clear understanding of engineering majors , 2). inadequate Engineering faculty and advisors availability especially applicable

  7. Statistics of 2D solitons

    International Nuclear Information System (INIS)

    Brekke, L.; Imbo, T.D.

    1992-01-01

    The authors study the inequivalent quantizations of (1 + 1)-dimensional nonlinear sigma models with space manifold S 1 and target manifold X. If x is multiply connected, these models possess topological solitons. After providing a definition of spin and statistics for these solitons and demonstrating a spin-statistics correlation, we give various examples where the solitons can have exotic statistics. In some of these models, the solitons may obey a generalized version of fractional statistics called ambistatistics. In this paper the relevance of these 2d models to the statistics of vortices in (2 + 1)-dimensional spontaneously broken gauge theories is discussed. The authors close with a discussion concerning the extension of our results to higher dimensions

  8. Personalized 2D color maps

    KAUST Repository

    Waldin, Nicholas

    2016-06-24

    2D color maps are often used to visually encode complex data characteristics such as heat or height. The comprehension of color maps in visualization is affected by the display (e.g., a monitor) and the perceptual abilities of the viewer. In this paper we present a novel method to measure a user\\'s ability to distinguish colors of a two-dimensional color map on a given monitor. We show how to adapt the color map to the user and display to optimally compensate for the measured deficiencies. Furthermore, we improve user acceptance of the calibration procedure by transforming the calibration into a game. The user has to sort colors along a line in a 3D color space in a competitive fashion. The errors the user makes in sorting these lines are used to adapt the color map to his perceptual capabilities.

  9. An overview of game-based learning in building services engineering education

    Science.gov (United States)

    Alanne, Kari

    2016-03-01

    To ensure proper competence development and short graduation times for engineering students, it is essential that the study motivation is encouraged by new learning methods. In game-based learning, the learner's engagement is increased and learning is made meaningful by applying game-like features such as competition and rewarding through virtual promotions or achievement badges. In this paper, the state of the art of game-based learning in building services engineering education at university level is reviewed and discussed. A systematic literature review indicates that educational games have been reported in the field of related disciplines, such as mechanical and civil engineering. The development of system-level educational games that realistically simulate work life in building services engineering is still in its infancy. Novel rewarding practices and more comprehensive approaches entailing the state-of-the-art information tools such as building information modelling, geographic information systems, building management systems and augmented reality are needed in the future.

  10. Learning analytics for smart campus: Data on academic performances of engineering undergraduates in Nigerian private university.

    Science.gov (United States)

    Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; John, Temitope M; Odukoya, Jonathan A; Omole, David O

    2018-04-01

    Empirical measurement, monitoring, analysis, and reporting of learning outcomes in higher institutions of developing countries may lead to sustainable education in the region. In this data article, data about the academic performances of undergraduates that studied engineering programs at Covenant University, Nigeria are presented and analyzed. A total population sample of 1841 undergraduates that studied Chemical Engineering (CHE), Civil Engineering (CVE), Computer Engineering (CEN), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mechanical Engineering (MEE), and Petroleum Engineering (PET) within the year range of 2002-2014 are randomly selected. For the five-year study period of engineering program, Grade Point Average (GPA) and its cumulative value of each of the sample were obtained from the Department of Student Records and Academic Affairs. In order to encourage evidence-based research in learning analytics, detailed datasets are made publicly available in a Microsoft Excel spreadsheet file attached to this article. Descriptive statistics and frequency distributions of the academic performance data are presented in tables and graphs for easy data interpretations. In addition, one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests are performed to determine whether the variations in the academic performances are significant across the seven engineering programs. The data provided in this article will assist the global educational research community and regional policy makers to understand and optimize the learning environment towards the realization of smart campuses and sustainable education.

  11. Integrating Industry in Project Organized Problem Based Learning for Engineering Educations

    DEFF Research Database (Denmark)

    Nielsen, Kirsten M.

    2006-01-01

    This abstract deals with the challenge of establishing engineering student projects in collaboration with industry. Based on empirical results a set of advices for industrial collaboration in project oriented problem based learning are formulated......This abstract deals with the challenge of establishing engineering student projects in collaboration with industry. Based on empirical results a set of advices for industrial collaboration in project oriented problem based learning are formulated...

  12. Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers Without Borders USA

    OpenAIRE

    Buchanan, Elizabeth; Berg, Devin; Lee, Tina; Buchanan, Elizabeth; Lacksonen, Tom

    2017-01-01

    Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers without Borders-USA is a four-year project exploring a variety of challenges and opportunities in university-based service learning programs. Specifically, this project looks holistically at the inception and evolution of a new Engineers Without Borders USA chapter, while analyzing characteristics, values, and demographics of individuals involved in EWB community-based humanitarian projects in multiple chapt...

  13. Engineering students' conceptions of entrepreneurial learning as part of their education

    Science.gov (United States)

    Täks, Marge; Tynjälä, Päivi; Kukemelk, Hasso

    2016-01-01

    The purpose of this study was to examine what kinds of conceptions of entrepreneurial learning engineering students expressed in an entrepreneurship course integrated in their study programme. The data were collected during an entrepreneurship course in Estonia that was organised for fourth-year engineering students, using video-recorded group interviews (N = 48) and individual in-depth interviews (N = 16). As a result of the phenomenographic analysis, four qualitatively distinctive conceptions of entrepreneurial learning were discerned. Entrepreneurial learning was seen to involve (1) applying entrepreneurial ideas to engineering, (2) understanding entrepreneurial issues in a new way, (3) action-oriented personal development, and (4) self-realising through collective effort. These qualitatively distinct categories differed from each other in four dimensions of variation: nature of learning, response to pedagogy, relation to teamwork, and learning outcomes.

  14. Aligning professional skills and active learning methods: an application for information and communications technology engineering

    Science.gov (United States)

    Llorens, Ariadna; Berbegal-Mirabent, Jasmina; Llinàs-Audet, Xavier

    2017-07-01

    Engineering education is facing new challenges to effectively provide the appropriate skills to future engineering professionals according to market demands. This study proposes a model based on active learning methods, which is expected to facilitate the acquisition of the professional skills most highly valued in the information and communications technology (ICT) market. The theoretical foundations of the study are based on the specific literature on active learning methodologies. The Delphi method is used to establish the fit between learning methods and generic skills required by the ICT sector. An innovative proposition is therefore presented that groups the required skills in relation to the teaching method that best develops them. The qualitative research suggests that a combination of project-based learning and the learning contract is sufficient to ensure a satisfactory skills level for this profile of engineers.

  15. EDUCATING ENGINEERS FOR/IN SUSTAINABLE DEVELOPMENT? WHAT WE KNEW, WHAT WE LEARNED, AND WHAT WE SHOULD LEARN

    Directory of Open Access Journals (Sweden)

    Karel F Mulder

    2010-01-01

    Full Text Available In the past decade, several engineering universities, mainly in Europe, but also in Australia, North America, and Japan, have been addressing the issue of sustainable development. Engineering education in sustainable development has been discussed at many occasions. What questions have been addressed, what answers have been provided, and what are the main remaining topics for research into engineering education in sustainable development? What should engineers learn regarding sustainable development? How to trigger institutional change within engineering schools: top-down or bottom-up? How to trigger cultural change, how to win the hearts and souls of the faculty? Curriculum change: starting new programs or changing existing ones? The contribution of active learning and project based learning? The role of external stakeholders, external cooperation? How to measure sustainable development learning effects? Practice what you preach: how to green the campus, diminish resource consumption and sustainabilise procurement? How to teach normative content in an academic context? The paper, based mainly on the European literature on EESD of the last decade, discusses the answers that were provided and present an agenda for further research in EESD (This paper has mainly a European perspective. An overview of sustainable development engineering education in the USA can be found in [80].

  16. The assessment of learning in engineering education practice and policy

    CERN Document Server

    Heywood, John

    2016-01-01

    Explores how we judge engineering education in order to effectively redesign courses and programs that will prepare new engineers for various professional and academic careers This book considers the functions of assessment and its measurement in engineering education. Chapters two through three discuss efforts toward alternative curriculum in engineering and advanced level exams for university entry in engineering science. Chapter four reviews investigations of what engineers do at work and their implications assessment. Chapter five records the development of competency based assessment and considers its implications for the engineering curriculum. Chapter six discusses the impact of the accrediting authorities on assessment, outcomes based assessment, taxonomies and assessment in mastery and personalized systems of instruction. Chapters seven through eight consider student variability (e.g. intellectual development, emotional intelligence) and reflective practice. Questio s are raised about the assessment...

  17. Incorporating comparative genomics into the design-test-learn cycle of microbial strain engineering.

    Science.gov (United States)

    Sardi, Maria; Gasch, Audrey P

    2017-08-01

    Engineering microbes with new properties is an important goal in industrial engineering, to establish biological factories for production of biofuels, commodity chemicals and pharmaceutics. But engineering microbes to produce new compounds with high yield remains a major challenge toward economically viable production. Incorporating several modern approaches, including synthetic and systems biology, metabolic modeling and regulatory rewiring, has proven to significantly advance industrial strain engineering. This review highlights how comparative genomics can also facilitate strain engineering, by identifying novel genes and pathways, regulatory mechanisms and genetic background effects for engineering. We discuss how incorporating comparative genomics into the design-test-learn cycle of strain engineering can provide novel information that complements other engineering strategies. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. Engineering Students' Conceptions of Entrepreneurial Learning as Part of Their Education

    Science.gov (United States)

    Täks, Marge; Tynjälä, Päivi; Kukemelk, Hasso

    2016-01-01

    The purpose of this study was to examine what kinds of conceptions of entrepreneurial learning engineering students expressed in an entrepreneurship course integrated in their study programme. The data were collected during an entrepreneurship course in Estonia that was organised for fourth-year engineering students, using video-recorded group…

  19. An eLearning Standard Approach for Supporting PBL in Computer Engineering

    Science.gov (United States)

    Garcia-Robles, R.; Diaz-del-Rio, F.; Vicente-Diaz, S.; Linares-Barranco, A.

    2009-01-01

    Problem-based learning (PBL) has proved to be a highly successful pedagogical model in many fields, although it is not that common in computer engineering. PBL goes beyond the typical teaching methodology by promoting student interaction. This paper presents a PBL trial applied to a course in a computer engineering degree at the University of…

  20. Implementing Problem-Based Learning in Introductory Engineering Courses: A Qualitative Investigation of Facilitation Strategies

    Science.gov (United States)

    Nicole Hunter, Deirdre-Annaliese

    2015-01-01

    Increasing pressure to transform teaching and learning of engineering is supported by mounting research evidence for the value of learner-centered pedagogies. Despite this evidence, engineering faculty are often unsuccessful in applying such teaching approaches often because they lack the necessary knowledge to customize these pedagogies for their…

  1. Using the van Hiele K-12 Geometry Learning Theory to Modify Engineering Mechanics Instruction

    Science.gov (United States)

    Sharp, Janet M.; Zachary, Loren W.

    2004-01-01

    Engineering students use spatial thinking when examining diagrams or models to study structure design. It is expected that most engineering students have solidified spatial thinking skills during K-12 schooling. However, according to what we know about geometry learning and teaching, spatial thinking probably needs to be explicitly taught within…

  2. Multiple Learning Strategies Project. Small Engine Repair Service. Regular Vocational. [Vol. 1.

    Science.gov (United States)

    Pitts, Jim; And Others

    This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-four learning modules organized into ten units: engine block; air cleaner; starters; fuel tanks; lines, filters, and pumps; carburetors; electrical; magneto systems;…

  3. Integrator Element as a Promoter of Active Learning in Engineering Teaching

    Science.gov (United States)

    Oliveira, Paulo C.; Oliveira, Cristina G.

    2014-01-01

    In this paper, we present a teaching proposal used in an Introductory Physics course to civil engineering students from Porto's Engineering Institute/Instituto Superior de Engenharia do Porto (ISEP). The proposal was born from the need to change students' perception and motivation for learning physics. It consists in the use of an integrator…

  4. Engineers' Perceptions of Diversity and the Learning Environment at Work: A Mixed Methods Study

    Science.gov (United States)

    Firestone, Brenda L.

    2012-01-01

    The purpose of this dissertation research study was to investigate engineers' perceptions of diversity and the workplace learning environment surrounding diversity education efforts in engineering occupations. The study made use of a mixed methods methodology and was theoretically framed using a critical feminist adult education lens and…

  5. Learning to "Fit In": The Emotional Work of Chinese Immigrants in Canadian Engineering Workplaces

    Science.gov (United States)

    Shan, Hongxia

    2012-01-01

    Purpose: The paper aims to explore the emotion learning experiences of some Chinese immigrants in Canadian engineering workplaces. Design/methodology/approach: The paper is based on life history style interviews with 14 Chinese immigrant engineers and 14 key informant interviews. Findings: Research respondents constructed a competitive, masculine,…

  6. Changing the Teaching/Learning Procedures in Physics for Agricultural Engineering. A Case Study

    Science.gov (United States)

    Mulero, Angel; Parra, M. Isabel; Cachadina, Isidro

    2012-01-01

    The subject "Physical Fundamentals of Engineering" for agricultural engineers in the University of Extremadura has long had high rates of students not attending classes, not presenting for examinations and, finally, failing the subject. During the 2007 and 2008 courses, the teaching/learning procedures were strongly modified. Analysis of the…

  7. FísicActiva: Applying Active Learning Strategies to a Large Engineering Lecture

    Science.gov (United States)

    Auyuanet, Adriana; Modzelewski, Helena; Loureiro, Silvia; Alessandrini, Daniel; Míguez, Marina

    2018-01-01

    This paper presents and analyses the results obtained by applying Active Learning techniques in overcrowded Physics lectures at the University of the Republic, Uruguay. The course referred to is Physics 1, the first Physics course that all students of the Faculty of Engineering take in their first semester for all the Engineering-related careers.…

  8. Fifth Graders' Learning about Simple Machines through Engineering Design-Based Instruction Using LEGO™ Materials

    Science.gov (United States)

    Marulcu, Ismail; Barnett, Mike

    2013-01-01

    This study is part of a 5-year National Science Foundation-funded project, Transforming Elementary Science Learning Through LEGO™ Engineering Design. In this study, we report on the successes and challenges of implementing an engineering design-based and LEGO™-oriented unit in an urban classroom setting and we focus on the impact of the unit on…

  9. Evolution of Project-Based Learning in Small Groups in Environmental Engineering Courses

    Science.gov (United States)

    Requies, Jesús M.; Agirre, Ion; Barrio, V. Laura; Graells, Moisès

    2018-01-01

    This work presents the assessment of the development and evolution of an active methodology (Project-Based Learning--PBL) implemented on the course "Unit Operations in Environmental Engineering", within the bachelor's degree in Environmental Engineering, with the purpose of decreasing the dropout rate in this course. After the initial…

  10. Effects of Web-Based Interactive Modules on Engineering Students' Learning Motivations

    Science.gov (United States)

    Bai, Haiyan; Aman, Amjad; Xu, Yunjun; Orlovskaya, Nina; Zhou, Mingming

    2016-01-01

    The purpose of this study is to assess the impact of a newly developed modules, Interactive Web-Based Visualization Tools for Gluing Undergraduate Fuel Cell Systems Courses system (IGLU), on learning motivations of engineering students using two samples (n[subscript 1] = 144 and n[subscript 2] = 135) from senior engineering classes. The…

  11. Hydrostatic Pressure Project: Linked-Class Problem-Based Learning in Engineering

    Science.gov (United States)

    Davis, Freddie J.; Lockwood-Cooke, Pamela; Hunt, Emily M.

    2011-01-01

    Over the last few years, WTAMU Mathematics, Engineering and Science faculty has used interdisciplinary projects as the basis for implementation of a linked-class approach to Problem-Based Learning (PBL). A project that has significant relevance to engineering statics, fluid mechanics, and calculus is the Hydrostatic Pressure Project. This project…

  12. Aligning Professional Skills and Active Learning Methods: An Application for Information and Communications Technology Engineering

    Science.gov (United States)

    Llorens, Ariadna; Berbegal-Mirabent, Jasmina; Llinàs-Audet, Xavier

    2017-01-01

    Engineering education is facing new challenges to effectively provide the appropriate skills to future engineering professionals according to market demands. This study proposes a model based on active learning methods, which is expected to facilitate the acquisition of the professional skills most highly valued in the information and…

  13. A Blended Learning Approach to Teach Fluid Mechanics in Engineering

    Science.gov (United States)

    Rahman, Ataur

    2017-01-01

    This paper presents a case study on the teaching and learning of fluid mechanics at the University of Western Sydney (UWS), Australia, by applying a blended learning approach (BLA). In the adopted BLA, various flexible learning materials have been made available to the students such as online recorded lectures, online recorded tutorials, hand…

  14. Four Novel Zn (II Coordination Polymers Based on 4′-Ferrocenyl-3,2′:6′,3′′-Terpyridine: Engineering a Switch from 1D Helical Polymer Chain to 2D Network by Coordination Anion Modulation

    Directory of Open Access Journals (Sweden)

    Lufei Xiao

    2017-11-01

    Full Text Available Four novel ZnII coordination polymers, [(ZnCl22(L2]n (1, [(ZnBr22(L2]n (2, and [(ZnI22(L2]n (3 and {[Zn(SCN2]1.5(L3}n (4, have been synthesized based on 4′-ferrocenyl-3,2′:6′,3′′-terpyridine with ZnII ions and different coordination anions under similar ambient conditions. Their structures have been confirmed using single crystal X-ray diffraction analysis, showing that complexes 1–3 are one-dimensional (1D double-stranded metal ion helical polymer chains and complex 4 is of a two-dimensional (2D network. The structural transformations of them from a 1D polymer chain to a 2D network under the influence of the coordination anions has been systematic investigated. Furthermore, the optical band gaps have been measured by optical diffuse reflectance spectroscopy, revealing that the ligand and the complexes should have semiconductor properties.

  15. An Example of Competence-Based Learning: Use of Maxima in Linear Algebra for Engineers

    Science.gov (United States)

    Diaz, Ana; Garcia, Alfonsa; de la Villa, Agustin

    2011-01-01

    This paper analyses the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is…

  16. Can Interactive Web-Based CAD Tools Improve the Learning of Engineering Drawing? A Case Study

    Science.gov (United States)

    Pando Cerra, Pablo; Suárez González, Jesús M.; Busto Parra, Bernardo; Rodríguez Ortiz, Diana; Álvarez Peñín, Pedro I.

    2014-01-01

    Many current Web-based learning environments facilitate the theoretical teaching of a subject but this may not be sufficient for those disciplines that require a significant use of graphic mechanisms to resolve problems. This research study looks at the use of an environment that can help students learn engineering drawing with Web-based CAD…

  17. Three Dimensions of Learning: Experiential Activity for Engineering Innovation Education and Research

    Science.gov (United States)

    Killen, Catherine P.

    2015-01-01

    This paper outlines a novel approach to engineering education research that provides three dimensions of learning through an experiential class activity. A simulated decision activity brought current research into the classroom, explored the effect of experiential activity on learning outcomes and contributed to the research on innovation decision…

  18. Active and Collaborative Learning in an Introductory Electrical and Computer Engineering Course

    Science.gov (United States)

    Kotru, Sushma; Burkett, Susan L.; Jackson, David Jeff

    2010-01-01

    Active and collaborative learning instruments were introduced into an introductory electrical and computer engineering course. These instruments were designed to assess specific learning objectives and program outcomes. Results show that students developed an understanding comparable to that of more advanced students assessed later in the…

  19. Design and Implementation of a Mechatronics Learning Module in a Large First-Semester Engineering Course

    Science.gov (United States)

    Castles, R. T.; Zephirin, T.; Lohani, V. K.; Kachroo, P.

    2010-01-01

    Since 2005, the first-year engineering program at Virginia Tech, Blacksburg, has been significantly restructured to include more hands-on learning. A major grant (2004-2009) under the department level reform (DLR) program of the National Science Foundation (NSF) facilitated this restructuring. A number of hands-on learning modules were developed…

  20. Effects of Cloud-Based m-Learning on Student Creative Performance in Engineering Design

    Science.gov (United States)

    Chang, Yu-Shan; Chen, Si-Yi; Yu, Kuang-Chao; Chu, Yih-Hsien; Chien, Yu-Hung

    2017-01-01

    This study explored the effects of cloud-based m-learning on students' creative processes and products in engineering design. A nonequivalent pretest-posttest design was adopted, and 62 university students from Taipei City, Taiwan, were recruited as research participants in the study. The results showed that cloud-based m-learning had a positive…

  1. Developing an Understanding of Higher Education Science and Engineering Learning Communities

    Science.gov (United States)

    Coll, Richard K.; Eames, Chris

    2008-01-01

    This article sets the scene for this special issue of "Research in Science & Technological Education", dedicated to understanding higher education science and engineering learning communities. We examine what the literature has to say about the nature of, and factors influencing, higher education learning communities. A discussion of…

  2. The active learning educational organisation: a case study of innovation in electrical engineering education

    NARCIS (Netherlands)

    Vos, Henk

    2004-01-01

    The introduction of active learning in engineering education is often started by enthusiastic teachers or change agents. They usually encounter resistance from stakeholders such as colleagues, department boards or students. For a successful introduction these stakeholders all have to learn what

  3. Fundamental Research in Engineering Education. Student Learning in Industrially Situated Virtual Laboratories

    Science.gov (United States)

    Koretsky, Milo D.; Kelly, Christine; Gummer, Edith

    2011-01-01

    The instructional design and the corresponding research on student learning of two virtual laboratories that provide an engineering task situated in an industrial context are described. In this problem-based learning environment, data are generated dynamically based on each student team's distinct choices of reactor parameters and measurements.…

  4. INFUSING INDUSTRY PRACTICES INTO AN ENGINEERING CAPTSONE PROJECT: A LEARNING OUTCOME ATTAINMENT CASE STUDY

    Directory of Open Access Journals (Sweden)

    SATESH NAMASIVAYAM

    2016-04-01

    Full Text Available A capstone project in current engineering education is often introduced to enable the holistic attainment of engineering knowledge by an engineering undergraduate. Essentially project-based in nature, there exists a need to ensure that part of the attainment process involves key industry practices – such practices being necessary in attaining the status of a professional engineer. Herein lies the synergy that can be made use of between industry and academia. By exposing engineering undergraduates to a project which addresses an engineering challenge and providing them with the opportunity to learn from professional engineers who are experts in the fields of safety, sustainability, quality management, ethics and project management, this culminates in the implementation of a prototype design which incorporates the amalgamation of knowledge from industry and academia. This paper presents the unique curriculum developed in a capstone project module, incorporating learning sessions from professional engineers in the five (5 key areas of industry practice highlighted above and how these have contributed to significantly enhancing the learning outcome and hence programme outcome attainment of the engineering undergraduates who have experienced the module.

  5. Learning Styles of Science and Engineering Students in Problem and Project Based Education

    DEFF Research Database (Denmark)

    Kolmos, Anette; Holgaard, Jette Egelund

    2008-01-01

    At the Faculty of Engineering and Science at Aalborg University, Denmark, process skills are an integrated part of the curriculum objectives. During the first year programme, a special course in Collaboration, Learning and Project Management (CLP) is given to develop those skills. In order...... to develop students’ learning and the CLP-course, the Felder-Soloman Index of Learning Styles (ILS®) has been used in that course and data has been collected to investigate whether some learning style preferences are more conspicuous that others in a problem based learning environment. The results show, more...... pronounced than similar studies, that the first year engineering students at Aalborg University are considerable more active than reflective. This results leads to a discussion of whether reflection and conceptualization should be facilitated further in the curriculum to balance the students learning style...

  6. Changing the Learning Environment in the College of Engineering and Applied Science Using Challenge Based Learning

    Directory of Open Access Journals (Sweden)

    Whitney Brooke Gaskins

    2015-02-01

    Full Text Available Over the past 20 years there have been many changes to the primary and secondary educational system that have impacted students, teachers, and post-secondary institutions across the United States of America. One of the most important is the large number of standardized tests students are required to take to show adequate performance in school. Students think differently because they are taught differently due to this focus on standardized testing, thus changing the skill sets students acquire in secondary school. This presents a critical problem for colleges and universities, as they now are using practices for and have expectations of these students that are unrealistic for the changing times. High dropout rates in the colleges of engineering have been attributed to the cultural atmosphere of the institution. Students have reported a low sense of belonging and low relatability to course material. To reduce negative experiences and increase motivation, Challenge Based Learning (CBL was introduced in an undergraduate Basic Electric Circuits (BEC course. CBL is a structured model for course content with a foundation in problem-based learning. CBL offers general concepts from which students derive the challenges they will address. Results show an improved classroom experience for students who were taught with CBL.

  7. 2D Vertical Heterostructures for Novel Tunneling Device Applications

    Science.gov (United States)

    2017-03-01

    2D Vertical Heterostructures for Novel Tunneling Device Applications Philip M. Campbell, Christopher J. Perini, W. Jud Ready, and Eric M. Vogel...School of Materials Science and Engineering Georgia Institute of Technology Atlanta, GA, USA 30332 Abstract: Vertical heterostructures...digital logic, signal processing, analog-to-digital conversion, and high-frequency communications, vertical heterostructure tunneling devices have

  8. ENVIRONMENTAL EFFECTS OF DREDGING AND DISPOSAL (E2-D2)

    Science.gov (United States)

    US Army Corps of Engineers public web site for the "Environmental Effects of Dredging and Disposal" ("E2-D2") searchable database of published reports and studies about environmental impacts associated with dredging and disposal operations. Many of the reports and studies are ava...

  9. A study on the engineering education methods with a learning management system

    OpenAIRE

    海老澤, 賢史; Ebisawa, Satoshi

    2017-01-01

    The educational methods with Learning Management System (LMS) are described, which are applied to two specialized courses for engineering education and a research guidance for graduation work at Niigata Institute of Technology.According to the analysis of LMS usage situation for graduation work, the LMS has provided an effect that learning time outside class hour is held and the convenience of students in learning is enhanced.In the specializedcourses, the rate of utilization of LMS has depen...

  10. Preference Learning Style in Engineering Mathematics: Students' Perception of E-Learning

    Science.gov (United States)

    Tawil, Norngainy Mohd; Ismail, Nur Arzilah; Asshaari, Izamarlina; Othman, Haliza; Zaharim, Azami; Bahaludin, Hafizah

    2013-01-01

    Nowadays, traditional learning styles are assisted with e-learning components to ensure the effectiveness of the teaching and learning process, especially for the students. This approach is known as blended learning. Objective of this paper is to investigate and clarify the students' preferences in learning style, either traditional or e-learning.…

  11. High-Quality Learning Environments for Engineering Design: Using Tablet PCs and Guidelines from Research on How People Learn

    Directory of Open Access Journals (Sweden)

    Enrique Palou

    2012-04-01

    Full Text Available A team of several faculty members and graduate students at Universidad de las Amricas Puebla is improving engineering design teaching and learning by creating richer learning environments that promote an interactive classroom while integrating formative assessment into classroom practices by means of Tablet PCs and associated technologies. Learning environments that are knowledge-, learner-, community-, and assessment-centered as highlighted by the How People Learn framework, have been developed. To date, the redesign of the undergraduate course entitled Introduction to Engineering Design has signicantly (p<0.05 increased student participation; formative assessment and feedback are more common and rapid; and instructors are utilizing the information gained through real-time formative assessments to tailor instruction to meet student needs. Particularly important have been opportunities to make student thinking visible and to give them chances to revise, as well as opportunities for "what if" thinking.

  12. Benefiting Female Students in Science, Math, and Engineering: The Nuts and Bolts of Establishing a WISE (Women in Science and Engineering) Learning Community

    Science.gov (United States)

    Pace, Diana; Witucki, Laurie; Blumreich, Kathleen

    2008-01-01

    This paper describes the rationale and the step by step process for setting up a WISE (Women in Science and Engineering) learning community at one institution. Background information on challenges for women in science and engineering and the benefits of a learning community for female students in these major areas are described. Authors discuss…

  13. Brewing as a Comprehensive Learning Platform in Chemical Engineering

    Science.gov (United States)

    Nielsen, Rudi P.; Sørensen, Jens L.; Simonsen, Morten E.; Madsen, Henrik T.; Muff, Jens; Strandgaard, Morten; Søgaard, Erik G.

    2016-01-01

    Chemical engineering is mostly taught using traditional classroom teaching and laboratory experiments when possible. Being a wide discipline encompassing topics such as analytical chemistry, process design, and microbiology, it may be argued that brewing of beer has many relations to chemical engineering topic-wise. This work illustrates how…

  14. Incorporating Critical Thinking into an Engineering Undergraduate Learning Environment

    Science.gov (United States)

    Adair, Desmond; Jaeger, Martin

    2016-01-01

    Critical thinking extends to all aspects of professional engineering, especially in technical development, and, since the introduction of the ABET 2000 criteria, there has been an increased emphasis in engineering education on the development of critical thinking skills. What is hoped for is that the students obtain critical thinking skills to…

  15. Preparing students for workplace learning in higher engineering education

    NARCIS (Netherlands)

    Dehing, A.J.M.

    2012-01-01

    Student preparation for professional practice is an important course aim in the education of engineers by the universities of applied sciences (Geurts & Meijers, 2004; Sheppard, et al., 2008; Sullivan & Rosin, 2008). Since the start of the professional engineering schools at the beginning of the

  16. Mathematics Learning by Programming in a Game Engine

    DEFF Research Database (Denmark)

    Triantafyllou, Evangelia; Timcenko, Olga; Misfeldt, Morten

    2017-01-01

    This paper emerges from our research focusing on mathematics education in trans-disciplinary engineering programs and presents a case study in such an engineering discipline, namely the Media Technology program at Aalborg University Copenhagen, Denmark. In this case study, we substituted traditio...

  17. Active Learning Strategies: An illustrative approach to bring out better learning outcomes from Science, Technology, Engineering and Mathematics (STEM students

    Directory of Open Access Journals (Sweden)

    Adusumilli Srinath

    2014-10-01

    Full Text Available Teaching in a Teacher centric manner has been the mainframe teaching style in engineering education, however students feel it as a single sided approach and feel they are only passive listeners thus this style has now paved way to a Learner centric style of teaching-learning which is ACTIVE LEARNING, wherein every student is actively involved in one or the other form of learning and thus gets a chance to develop the key aspects of the course either on their own or by being a member of an active-learning group. They thus not only learn and practice the course contents but also learn managerial and team skills which are of much importance in present scenario in regard to Industries and companies where these students will be ultimately hired as employees. Professional education is making one’s students ready for the profession which includes team work, management and technical skills, thus Active learning has emerged as a mainframe tool for cherishing this aim of professional education, especially Science, Technology, Engineering and Management (STEM education. This paper aims to focus on a few facets of this active learning process and give an overview to the teaching faculty as well as students on what their individual roles must be like in this process for getting the most out of this process.

  18. Systems engineering, systems thinking, and learning a case study in space industry

    CERN Document Server

    Moser, Hubert Anton

    2014-01-01

    This book focuses on systems engineering, systems thinking, and how that thinking can be learned in practice. It describes a novel analytical framework based on activity theory for understanding how systems thinking evolves and how it can be improved to support multidisciplinary teamwork in the context of system development and systems engineering. This method, developed using data collected over four years from three different small space systems engineering organizations, can be applied in a wide variety of work activities in the context of engineering design and beyond in order to monitor and analyze multidisciplinary interactions in working teams over time. In addition, the book presents a practical strategy called WAVES (Work Activity for a Evolution of Systems engineering and thinking), which fosters the practical learning of systems thinking with the aim of improving process development in different industries. The book offers an excellent resource for researchers and practitioners interested in system...

  19. NASA Applications and Lessons Learned in Reliability Engineering

    Science.gov (United States)

    Safie, Fayssal M.; Fuller, Raymond P.

    2011-01-01

    Since the Shuttle Challenger accident in 1986, communities across NASA have been developing and extensively using quantitative reliability and risk assessment methods in their decision making process. This paper discusses several reliability engineering applications that NASA has used over the year to support the design, development, and operation of critical space flight hardware. Specifically, the paper discusses several reliability engineering applications used by NASA in areas such as risk management, inspection policies, components upgrades, reliability growth, integrated failure analysis, and physics based probabilistic engineering analysis. In each of these areas, the paper provides a brief discussion of a case study to demonstrate the value added and the criticality of reliability engineering in supporting NASA project and program decisions to fly safely. Examples of these case studies discussed are reliability based life limit extension of Shuttle Space Main Engine (SSME) hardware, Reliability based inspection policies for Auxiliary Power Unit (APU) turbine disc, probabilistic structural engineering analysis for reliability prediction of the SSME alternate turbo-pump development, impact of ET foam reliability on the Space Shuttle System risk, and reliability based Space Shuttle upgrade for safety. Special attention is given in this paper to the physics based probabilistic engineering analysis applications and their critical role in evaluating the reliability of NASA development hardware including their potential use in a research and technology development environment.

  20. A 3D Geometry Model Search Engine to Support Learning

    Science.gov (United States)

    Tam, Gary K. L.; Lau, Rynson W. H.; Zhao, Jianmin

    2009-01-01

    Due to the popularity of 3D graphics in animation and games, usage of 3D geometry deformable models increases dramatically. Despite their growing importance, these models are difficult and time consuming to build. A distance learning system for the construction of these models could greatly facilitate students to learn and practice at different…

  1. Cognitive Learning Styles: Can You Engineer a "Perfect" Match?

    Science.gov (United States)

    Khuzzan, Sharifah Mazlina Syed; Goulding, Jack Steven

    2016-01-01

    Education and training is widely acknowledged as being one of the key factors for leveraging organisational success. However, it is equally acknowledged that skills development and the acquisition of learning through managed cognitive approaches has yet to provide a "perfect" match. Whilst it is argued that an ideal learning scenario…

  2. Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

    Directory of Open Access Journals (Sweden)

    Yi Luo

    2015-09-01

    Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

  3. Design fixation and cooperative learning in elementary engineering design project: A case study

    Directory of Open Access Journals (Sweden)

    Yi Luo

    2015-09-01

    Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

  4. Evaluating the Effect of Arabic Engineering Students’ Learning Styles in Blended Programming Courses

    Directory of Open Access Journals (Sweden)

    Ahmed Al-Azawei

    2016-04-01

    Full Text Available This study investigated the complex relationship among learning styles, gender, perceived satisfaction, and academic performance across four programming courses supported by an e-learning platform. A total of 219 undergraduate students from a public Iraqi university who recently experienced e-learning voluntarily took place in the study. The integrated courses adopted a blended learning mode and all learners were provided the same learning content and pathway irrespective of their individual styles. Data were gathered using the Index of Learning Styles (ILS, three closed-ended questions, and the academic record. Traditional statistics and partial least squares structural equation modelling (PLS-SEM were performed to examine the proposed hypotheses. The findings of this research suggested that, overall, learning style dimensions are uncorrelated with either academic performance or perceived satisfaction, except for the processing dimension (active/reflective that has a significant effect on the latter. Furthermore, gender is unassociated with any of the proposed model’s constructs. Finally, there is no significant correlation between academic performance and perceived satisfaction. These results led to the conclusion that even though Arabic engineering students prefer active, sensing, visual, and sequential learning as do other engineering students from different backgrounds, they can adapt to a learning context even if their preferences are not met. The research contributes empirically to the existing debate regarding the potential implications of learning styles and for the Arabic context in particular, since respective research remains rare.

  5. On the Design of Virtual Reality Learning Environments in Engineering

    Directory of Open Access Journals (Sweden)

    Diego Vergara

    2017-06-01

    Full Text Available Currently, the use of virtual reality (VR is being widely applied in different fields, especially in computer science, engineering, and medicine. Concretely, the engineering applications based on VR cover approximately one half of the total number of VR resources (considering the research works published up to last year, 2016. In this paper, the capabilities of different computational software for designing VR applications in engineering education are discussed. As a result, a general flowchart is proposed as a guide for designing VR resources in any application. It is worth highlighting that, rather than this study being based on the applications used in the engineering field, the obtained results can be easily extrapolated to other knowledge areas without any loss of generality. This way, this paper can serve as a guide for creating a VR application.

  6. Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

    Directory of Open Access Journals (Sweden)

    Sackey, S. M.

    2017-05-01

    Full Text Available To manage the impact of Industry 4.0 on industrial engineering (IE education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE education in South Africa, making use of existing models of cyber-physical systems and learning factory morphology. In other results, the technical universities are discovered to be more positively disposed, in general terms, to developing an Industry 4.0 learning factory than are the traditional programmes which, with one exception, prefer computational facilities. Of ten universities that offer IE, only one — a traditional programme — has made significant progress towards creating an Industry 4.0 learning factory.

  7. A multidimensional approach to examine student interdisciplinary learning in science and engineering in higher education

    Science.gov (United States)

    Spelt, Elisabeth Jacoba Hendrika; Luning, Pieternelleke Arianne; van Boekel, Martinus A. J. S.; Mulder, Martin

    2017-11-01

    Preparing science and engineering students to work in interdisciplinary teams necessitates research on teaching and learning of interdisciplinary thinking. A multidimensional approach was taken to examine student interdisciplinary learning in a master course on food quality management. The collected 615 student experiences were analysed for the cognitive, emotional, and social learning dimensions using the learning theory of Illeris. Of these 615 experiences, the analysis showed that students reported 214, 194, and 207 times on, respectively, the emotional, the cognitive, and the social dimension. Per learning dimension, key learning experiences featuring interdisciplinary learning were identified such as 'frustrations in selecting and matching disciplinary knowledge to complex problems' (emotional), 'understanding how to apply theoretical models or concepts to real-world situations' (cognitive), and 'socially engaging with peers to recognise similarities in perceptions and experiences' (social). Furthermore, the results showed that students appreciated the cognitive dimension relatively more than the emotional and social dimensions.

  8. The impact of project-based learning on improving student learning outcomes of sustainability concepts in transportation engineering courses

    Science.gov (United States)

    Fini, Elham H.; Awadallah, Faisal; Parast, Mahour M.; Abu-Lebdeh, Taher

    2018-05-01

    This paper describes an intervention to enhance students' learning by involving students in brainstorming activities about sustainability concepts and their implications in transportation engineering. The paper discusses the process of incorporating the intervention into a transportation course, as well as the impact of this intervention on students' learning outcomes. To evaluate and compare students' learning as a result of the intervention, the Laboratory for Innovative Technology and Engineering Education survey instrument was used. The survey instrument includes five constructs: higher-order cognitive skills, self-efficacy, ease of learning subject matter, teamwork, and communication skills. Pre- and post-intervention surveys of student learning outcomes were conducted to determine the effectiveness of the intervention on enhancing students' learning outcomes. The results show that the implementation of the intervention significantly improved higher-order cognitive skills, self-efficacy, teamwork, and communication skills. Involving students in brainstorming activities related to sustainability concepts and their implications in transportation proved to be an effective teaching and learning strategy.

  9. The Impact of Project-Based Learning on Improving Student Learning Outcomes of Sustainability Concepts in Transportation Engineering Courses

    Science.gov (United States)

    Fini, Elham H.; Awadallah, Faisal; Parast, Mahour M.; Abu-Lebdeh, Taher

    2018-01-01

    This paper describes an intervention to enhance students' learning by involving students in brainstorming activities about sustainability concepts and their implications in transportation engineering. The paper discusses the process of incorporating the intervention into a transportation course, as well as the impact of this intervention on…

  10. Distance Learning Engineering Students Languish under Project-Based Learning, but Thrive in Case Studies and Practical Workshops

    Science.gov (United States)

    Swart, Arthur James

    2016-01-01

    The International Engineering Alliance lists 12 important graduate attributes that students must demonstrate during their higher educational career. One of these important graduate attributes is the ability to solve problems, which can be demonstrated by the use of project-based learning, case studies, and practical workshops. The purpose of this…

  11. Constructing engineers through practice: Gendered features of learning and identity development

    Science.gov (United States)

    Tonso, Karen L.

    How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of

  12. Using the Engineering Design Cycle to Develop Integrated Project Based Learning in Aerospace Engineering

    NARCIS (Netherlands)

    Saunders-Smits, G.N.; Roling, P.; Brügemann, V.; Timmer, N.; Melkert, J.

    2012-01-01

    Over the past four years the Faculty of Aerospace Engineering at Delft University of Technology in the Netherlands has redeveloped its BSc curriculum to mimic an engineering design cycle. Each semester represents a step in the design cycle: exploration; system design; sub-system design; test,

  13. Encouraging the Learning of Hydraulic Engineering Subjects in Agricultural Engineering Schools

    Science.gov (United States)

    Sinobas, Leonor Rodríguez; Sánchez Calvo, Raúl

    2014-01-01

    Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of…

  14. Identification of the dynamic operating envelope of HCCI engines using class imbalance learning.

    Science.gov (United States)

    Janakiraman, Vijay Manikandan; Nguyen, XuanLong; Sterniak, Jeff; Assanis, Dennis

    2015-01-01

    Homogeneous charge compression ignition (HCCI) is a futuristic automotive engine technology that can significantly improve fuel economy and reduce emissions. HCCI engine operation is constrained by combustion instabilities, such as knock, ringing, misfires, high-variability combustion, and so on, and it becomes important to identify the operating envelope defined by these constraints for use in engine diagnostics and controller design. HCCI combustion is dominated by complex nonlinear dynamics, and a first-principle-based dynamic modeling of the operating envelope becomes intractable. In this paper, a machine learning approach is presented to identify the stable operating envelope of HCCI combustion, by learning directly from the experimental data. Stability is defined using thresholds on combustion features obtained from engine in-cylinder pressure measurements. This paper considers instabilities arising from engine misfire and high-variability combustion. A gasoline HCCI engine is used for generating stable and unstable data observations. Owing to an imbalance in class proportions in the data set, the models are developed both based on resampling the data set (by undersampling and oversampling) and based on a cost-sensitive learning method (by overweighting the minority class relative to the majority class observations). Support vector machines (SVMs) and recently developed extreme learning machines (ELM) are utilized for developing dynamic classifiers. The results compared against linear classification methods show that cost-sensitive nonlinear ELM and SVM classification algorithms are well suited for the problem. However, the SVM envelope model requires about 80% more parameters for an accuracy improvement of 3% compared with the ELM envelope model indicating that ELM models may be computationally suitable for the engine application. The proposed modeling approach shows that HCCI engine misfires and high-variability combustion can be predicted ahead of time

  15. Benchmarking of FA2D/PARCS Code Package

    International Nuclear Information System (INIS)

    Grgic, D.; Jecmenica, R.; Pevec, D.

    2006-01-01

    FA2D/PARCS code package is used at Faculty of Electrical Engineering and Computing (FER), University of Zagreb, for static and dynamic reactor core analyses. It consists of two codes: FA2D and PARCS. FA2D is a multigroup two dimensional transport theory code for burn-up calculations based on collision probability method, developed at FER. It generates homogenised cross sections both of single pins and entire fuel assemblies. PARCS is an advanced nodal code developed at Purdue University for US NRC and it is based on neutron diffusion theory for three dimensional whole core static and dynamic calculations. It is modified at FER to enable internal 3D depletion calculation and usage of neutron cross section data in a format produced by FA2D and interface codes. The FA2D/PARCS code system has been validated on NPP Krsko operational data (Cycles 1 and 21). As we intend to use this code package for development of IRIS reactor loading patterns the first logical step was to validate the FA2D/PARCS code package on a set of IRIS benchmarks, starting from simple unit fuel cell, via fuel assembly, to full core benchmark. The IRIS 17x17 fuel with erbium burnable absorber was used in last full core benchmark. The results of modelling the IRIS full core benchmark using FA2D/PARCS code package have been compared with reference data showing the adequacy of FA2D/PARCS code package model for IRIS reactor core design.(author)

  16. A blended learning approach to teach fluid mechanics in engineering

    Science.gov (United States)

    Rahman, Ataur

    2017-05-01

    This paper presents a case study on the teaching and learning of fluid mechanics at the University of Western Sydney (UWS), Australia, by applying a blended learning approach (BLA). In the adopted BLA, various flexible learning materials have been made available to the students such as online recorded lectures, online recorded tutorials, hand written tutorial solutions, discussion board and online practice quizzes. The lecture and tutorial class times have been primarily utilised to discuss confusing topics and engage students with practical issues in applying the theories learnt in fluid mechanics. Based on the data of over 734 students over a 4-year period, it has been shown that a BLA has improved the learning experience of the fluid mechanics students in UWS. The overall percentage of student satisfaction in this subject has increased by 18% in the BLA case compared with the traditional one.

  17. Imitation and Innovation: The Dual Engines of Cultural Learning.

    Science.gov (United States)

    Legare, Cristine H; Nielsen, Mark

    2015-11-01

    Imitation and innovation work in tandem to support cultural learning in children and facilitate our capacity for cumulative culture. Here we propose an integrated theoretical account of how the unique demands of acquiring instrumental skills and cultural conventions provide insight into when children imitate, when they innovate, and to what degree. For instrumental learning, with an increase in experience, high fidelity imitation decreases and innovation increases. By contrast, for conventional learning, imitative fidelity stays high, regardless of experience, and innovation stays low. We synthesize cutting edge research on the development of imitative flexibility and innovation to provide insight into the social learning mechanisms underpinning the uniquely human mind. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. New trends in networking, computing, e-learning, systems sciences, and engineering

    CERN Document Server

    Sobh, Tarek

    2015-01-01

    This book includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Computer Science, Informatics, and Systems Sciences, and Engineering. It includes selected papers form the conference proceedings of the Ninth International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering (CISSE 2013). Coverage includes topics in: Industrial Electronics, Technology & Automation, Telecommunications and Networking, Systems, Computing Sciences and Software Engineering, Engineering Education, Instructional Technology, Assessment, and E-learning.  • Provides the latest in a series of books growing out of the International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering; • Includes chapters in the most advanced areas of Computing, Informatics, Systems Sciences, and Engineering; • Accessible to a wide range of readership, including professors, researchers, practitioners and...

  19. Mobile Learning According to Students of Computer Engineering and Computer Education: A Comparison of Attitudes

    Directory of Open Access Journals (Sweden)

    Deniz Mertkan GEZGIN

    2018-01-01

    Full Text Available Mobile learning has started to perform an increasingly significant role in improving learning outcomes in education. Successful and efficient implementation of m-learning in higher education, as with all educational levels, depends on users’ acceptance of this technology. This study focuses on investigating the attitudes of undergraduate students of Computer Engineering (CENG and Computer Education and Instructional Technology (CEIT departments in a Turkish public university towards m-learning from three perspectives; gender, area of study, and mobile device ownership. Using a correlational survey method, a Mobile Learning Attitude Scale (MLAS was administered to 531 students, analysis of which revealed a positive attitude to m-learning in general. A further investigation of the aforementioned three variables showed a more positive attitude for female students in terms of usability, for CEIT students in terms of advantages, usability and independence, and for those owning a mobile device in terms of usability. An important implication from the findings, among others, is supplementing Computer Engineering curriculum with elective courses on the fundamentals of mobile learning, and/or the design and development of m-learning software, so as to create, in the long run, more specialized and complementary teams comprised of trained CENG and CEIT graduates in m-learning sector.

  20. Conformity Assessment as a Tool for Organizational Learning in Large Engineering and Construction Projects

    Directory of Open Access Journals (Sweden)

    Luciano Assalim

    2013-05-01

    Full Text Available For the successful realization of large engineering and construction projects (LECPs, a systemic organizational learning framework for institutional cooperation is critical. Due to the long project life-cycle of LECPs, this is particularly important for this kind of project. The objective of this paper is to analyze to what extent the conformity assessment of LECPs, carried out under Engineering, Procurement and Construction management (EPCm services, can be used as a tool for organizational learning and cooperation between typical stakeholders (project owners, engineering contractors, EPC contractors; subcontractors and certification bodies. The research, from which this paper emanates, was based on a case study concerning LECPs in an oil and gas company in Brazil. Based on its results, we suggest that the proposed organizational learning framework, supported by the conformity assessment rationale, constitutes an important management tool that can be disseminated in other organizational contexts where conformity assessments of LECPs take place.

  1. How Newcomers Learn the Social Norms of an Organization: A Case Study of the Socialization of Newly Hired Engineers

    Science.gov (United States)

    Korte, Russell F.

    2009-01-01

    Current scholarship views organizational socialization as a learning process that is primarily the responsibility of the newcomer. Yet recent learning research recognizes the importance of the social interactions in the learning process. This study investigated how newly hired engineers at a large manufacturing company learned job-related tasks…

  2. Analysing Learning Outcomes in an Electrical Engineering Curriculum Using Illustrative Verbs Derived from Bloom's Taxonomy

    Science.gov (United States)

    Meda, Lawrence; Swart, Arthur James

    2018-01-01

    Learning outcomes are essential to any curriculum in education, where they need to be clear, observable and measurable. However, some academics structure learning outcomes in a way that does not promote student learning. The purpose of this article is to present the analyses of learning outcomes of an Electrical Engineering curriculum offered at a…

  3. Effects of South Korean High School Students' Motivation to Learn Science and Technology on Their Concern Related to Engineering

    Science.gov (United States)

    Lee, Eunsang

    2017-01-01

    This study investigated the gender difference among South Korean high school students in science learning motivation, technology learning motivation, and concern related engineering, as well as the correlation between these factors. It also verified effects of the sub-factors of science learning motivation and technology learning motivation on…

  4. COMPETENCE CRITERIA OF TEACHERS AT BLENDED LEARNING OF ENGINEERING STUDENTS

    Directory of Open Access Journals (Sweden)

    Kateryna A. Ivanova

    2017-09-01

    Full Text Available The work is devoted to the definition of competence criteria of teachers in the mixed (hybrid education of engineering students. The study was conducted based on generalization of known competence criteria of teachers of traditional education and analysis of publications of domestic and foreign authors devoted to the problems of mixed education. The competence criteria of the teachers in mixed training of engineering students were proposed, an expert evaluation of the importance of each criterion was conducted using the non-parametric Friedman criterion. 27 criteria which are most significant for assessing the competence of teachers in the mixed education of engineering students were identified. Taking into account the specificity of the teacher's work in mixed education, the singled out competence criteria were divided into three subgroups.

  5. An Iterative and Incremental Approach for E-Learning Ontology Engineering

    Directory of Open Access Journals (Sweden)

    Sudath Rohitha Heiyanthuduwage

    2009-03-01

    Full Text Available Abstract - There is a boost in the interest on ontology with the developments in Semantic Web technologies. Ontologies play a vital role in semantic web. Even though there is lot of work done on ontology, still a standard framework for ontology engineering has not been defined. Even though current ontology engineering methodologies are available they need improvements. The effort of our work is to integrate various methods, techniques, tools and etc to different stages of proposed ontology engineering life cycle to create a comprehensive framework for ontology engineering. Current methodologies discuss ontology engineering stages and collaborative environments with user collaboration. However, discussion on increasing effectiveness and correct inference has been given less attention. More over, these methodologies provide little discussion on usability of domain ontologies. We consider these aspects as more important in our work. Also, ontology engineering has been done for various domains and for various purposes. Our effort is to propose an iterative and incremental approach for ontology engineering especially for e-learning domain with the intention of achieving a higher usability and effectiveness of e-learning systems. This paper introduces different aspects of the proposed ontology engineering framework and evaluation of it.

  6. LEAN-GREEN MANUFACTURING: COLLABORATIVE CONTENT AND LANGUAGE INTEGRATED LEARNING IN HIGHER EDUCATION AND ENGINEERING COURSES

    Directory of Open Access Journals (Sweden)

    MARCELO RUDOLFO CALVETE GASPAR

    2017-09-01

    Full Text Available Lean and Green manufacturing processes aim at achieving lower material and labour costs, while reducing impacts on the environment, and promoting sustainability as a whole. This paper reports on a pilot experiment with higher education and engineering students, exploring the full potential of a collaborative approach on courses integrating the Portuguese Polytechnic of Castelo Branco engineering studies curricula, while simultaneously improving their proficiency in English. Content and Language Integrated Learning (CLIL has become a key area of curricular innovation since it is known for improving both language and content teacher and student motivation. In this context, instructional design for CLIL entailed tandem work of content (engineering and language (English teacher to design learning sequences and strategies. This allowed students to improve not only their language skills in English but also their knowledge in the specific engineering domain content on green and lean manufacturing processes.

  7. ORGANIZATION OF FUTURE ENGINEERS' PROJECT-BASED LEARNING WHEN STUDYING THE PROJECT MANAGEMENT METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Halyna V. Lutsenko

    2015-02-01

    Full Text Available The peculiarities of modern world experience of implementation of project-based learning in engineering education have been considered. The potential role and place of projects in learning activity have been analyzed. The methodology of organization of project-based activity of engineering students when studying the project management methodology and computer systems of project management has been proposed. The requirements to documentation and actual results of students' projects have been described in detail. The requirements to computer-aided systems of project management developed by using Microsoft Project in the scope of diary scheduling and resources planning have been formulated.

  8. A Remote and Virtual Lab with Experiments for Secondary Education, Engineering and Lifelong Learning Courses

    Directory of Open Access Journals (Sweden)

    Alberto Cardoso

    2012-03-01

    Full Text Available The Information and Communication Technology tools are nowadays invaluable to support e-learning and b-learning programs. The Remote and Virtual Laboratory in development at the Department of Informatics Engineering of the University of Coimbra (Portugal, RVL@DEI-UC, is a web-based platform that allows users to perform a large set of experiments in different areas and contexts, such as in education or training. This paper aims to describe the inherent potential of this platform in secondary education, engineering and lifelong learning courses. The conceptualization, architecture and implementation of the web platform for real and virtual experiments, which is remotely accessed using the Internet, are presented and the relevance of the lab’s integration in an intelligent tutoring system is also highlighted, mainly in what regards the requirements of adaptation and customization to different users’ profile in different learning contexts.

  9. Faculty perspectives on the inclusion of work-related learning in engineering curricula

    DEFF Research Database (Denmark)

    Magnell, Marie; Geschwind, Lars Allan; Kolmos, Anette

    2017-01-01

    The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced...... into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated...... activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include...

  10. Self-Regulated Learning Strategies Applied to Undergraduate, Graduate and Specialization Students from Civil Engineering

    Directory of Open Access Journals (Sweden)

    Jose Carlos Redaelli

    2013-03-01

    Full Text Available The current demand for civil engineering work requires new skills and knowledge and calls for new and effective learning methods. This paper shows self-regulated learning strategies applied to undergraduate, graduate and specialization students from Civil Engineering in a Brazilian University. A Scale of Evaluation of Learning Strategies was administered with a view to identifying students´ cognitive, metacognitive and dysfunctional learning strategies.

  11. Implementing Problem Based Learning through Engineers without Borders Student Projects

    Science.gov (United States)

    Wittig, Ann

    2013-01-01

    Engineers Without Borders USA (EWB) is a nonprofit organization that partners student chapters with communities in fundamental need of potable water, clean air, sanitation, irrigation, energy, basic structures for schools and clinics, roads and bridges, etc. While EWB projects may vary in complexity, they are all realistic, ill-structured and…

  12. Mobile APP for Motivation to Learning: An Engineering Case

    Science.gov (United States)

    Jou, Min; Lin, Yen-Ting; Tsai, Hsieh-Chih

    2016-01-01

    Synthesis of Materials is regarded as an important core subject in engineering education. However, many concepts and knowledge in the material synthesis can be rather abstract and difficult to understand by the student learners. Experiments are limited in scope due to lack of equipment, control of toxic materials, and risks of chemical reactions,…

  13. Development of a virtual tool for learning basic organisation and planning in rural engineering projects

    Science.gov (United States)

    Redel-Macías, María Dolores; Castillo, Carlos; Aguilar Porro, Cristina; Polo, María; Taguas, Encarnación V.

    2014-09-01

    This paper presents a virtual lab for the contents of an Engineering project, for designing an agro-industrial building, which is also useful for a range of different transversal courses in Engineering sciences. The aims of this tool are to analyse the most important contents of a project-document (calculation, regulations, drawings and budgets), as well as their relationship with the activities which make up the work and the schedule. The design criteria we considered were: its online applications and their compatibility with Moodle; the inclusion of different learning approaches, such as exploratory learning and inquiry-based learning; its interactivity, and the use of multimedia elements for visualisation and direct analysis on material common to Engineering subjects. The students' perceptions of the improvements brought by the virtual lab were analysed statistically through a series of questions over two academic years. The results of the questionnaires suggested that most of those who had used the e-learning tool valued positively its overall suitability for reaching the objectives in their subject as well as the way it improved the working methodology. The practical knowledge acquired by the students was also highly valued. In addition, the lack of constraints commonly related to field trips (expenses, time and complexity) illustrates the utility of self-access learning tools in key transversal disciplines such as Engineering projects.

  14. Adaptive critic learning techniques for engine torque and air-fuel ratio control.

    Science.gov (United States)

    Liu, Derong; Javaherian, Hossein; Kovalenko, Olesia; Huang, Ting

    2008-08-01

    A new approach for engine calibration and control is proposed. In this paper, we present our research results on the implementation of adaptive critic designs for self-learning control of automotive engines. A class of adaptive critic designs that can be classified as (model-free) action-dependent heuristic dynamic programming is used in this research project. The goals of the present learning control design for automotive engines include improved performance, reduced emissions, and maintained optimum performance under various operating conditions. Using the data from a test vehicle with a V8 engine, we developed a neural network model of the engine and neural network controllers based on the idea of approximate dynamic programming to achieve optimal control. We have developed and simulated self-learning neural network controllers for both engine torque (TRQ) and exhaust air-fuel ratio (AFR) control. The goal of TRQ control and AFR control is to track the commanded values. For both control problems, excellent neural network controller transient performance has been achieved.

  15. Project-organized collaborative learning in distance engineering education

    DEFF Research Database (Denmark)

    Knudsen, Morten; Bajard, C.; Helbo, Jan

    2003-01-01

    Transferring a successful on-campus project-organized learning method to distance continued education is complicated by the fact, that the target group as well as the learning environment and forms of communication are fundamentally different. The Master of Industrial Information Technology...... distance education has been selected for experiments with utilization of new information and commu-nication technology and didactic adjustments to make this transfer from on-campus to off-campus a successful endeavor. The adjustments, as well as the assessment of their effect, are based on a system......-atic monitoring and evaluation of the first year, and subsequent reflections by students and teachers....

  16. Implementing CDIO project-based learning in training of Heat and Power engineers

    Science.gov (United States)

    Boiko, E. A.; Shishmarev, P. V.; Karabarin, D. I.; Yanov, S. R.; Pikalova, A. A.

    2017-11-01

    This paper presents the experience and current results of CDIO standards implementation in training of bachelors in Heat and Power Engineering at Thermal Power Stations academic department in Siberian Federal University. It provides information on methodology of modernization of educational programs, curricula and programs of disciplines in transition to CDIO project-based learning technology. Preliminary assessment and analysis of lessons learned and scaling perspectives are given.

  17. Engineering students approaching the mathematics textbook as a potential learning tool – opportunities and constraints

    OpenAIRE

    Randahl, Mira

    2016-01-01

    Doktorgradsavhandling It is usually assumed that the students at tertiary level work intensively and individually with the new mathematical concepts (Wood, 2001). In this context the mathematics textbook might be an important learning tool. This thesis addresses the issue of what factors might influence the role of the mathematics textbook as a learning tool. The study is situated in the context of the basic mathematics course taken by first-year engineering students. A b...

  18. Case study of a problem-based learning course of physics in a telecommunications engineering degree

    Science.gov (United States)

    Macho-Stadler, Erica; Jesús Elejalde-García, Maria

    2013-08-01

    Active learning methods can be appropriate in engineering, as their methodology promotes meta-cognition, independent learning and problem-solving skills. Problem-based learning is the educational process by which problem-solving activities and instructor's guidance facilitate learning. Its key characteristic involves posing a 'concrete problem' to initiate the learning process, generally implemented by small groups of students. Many universities have developed and used active methodologies successfully in the teaching-learning process. During the past few years, the University of the Basque Country has promoted the use of active methodologies through several teacher training programmes. In this paper, we describe and analyse the results of the educational experience using the problem-based learning (PBL) method in a physics course for undergraduates enrolled in the technical telecommunications engineering degree programme. From an instructors' perspective, PBL strengths include better student attitude in class and increased instructor-student and student-student interactions. The students emphasised developing teamwork and communication skills in a good learning atmosphere as positive aspects.

  19. Women In Engineering Learning Community: What We Learned The First Year

    OpenAIRE

    LaBoone, Kimberly; Lazar, Maureen; Watford, Bevlee

    2007-01-01

    The College of Engineering at Virginia Tech reflects national trends with respect to women in engineering. With first year enrollments hovering around 17%, the retention through graduation of these women is critical to increasing the number of women in the engineering profession. When examining year to year retention rates, it is observed that the largest percentage of women drop out of engineering during or immediately following their first year. It is therefore believed that efforts to incr...

  20. FEM-2D - Input description and performance

    International Nuclear Information System (INIS)

    Schmidt, F.A.R.

    1975-03-01

    FEM-2D solves the 2d diffusion equation by the Finite Element Method. This version of the code was written for x-y geometry, triangular elements with first and second order flux approximations, and has a solution routine which is based on a modified Cholesky procedure. FEM-2D is fully integrated into the modular system RSYST. However, we have developed a simulation program RSIMK which simulates some of the functions of RSYST and allows to run FEM-2D independently. (orig.) [de

  1. Future Competencies and Learning Methods in Engineering Education

    DEFF Research Database (Denmark)

    Kolmos, Anette

    2002-01-01

    What are the competencies for tommorow´s enginnering education and the implications of these regarding the choice of teaching content and learning methods? The paper analyses two trends: the traditional and the techo-science approach. These two trends are based on technological innovation...... and change processes and impact on educational content and methods....

  2. Teaching and learning methodologies in engineering education in ...

    African Journals Online (AJOL)

    The students' outcome in terms of quality of graduates as regard teaching and learning determines whether the existing methods should be reviewed or not. In the recent world ranking of Universities, only University of Ibadan came among the first hundred despite the number of Universities in Nigeria. This calls for general ...

  3. Effectiveness of design-based learning in engineering education

    NARCIS (Netherlands)

    Gomez Puente, S.M.; Eijck, van M.W.; Jochems, W.M.G.

    2011-01-01

    Design-based learning (DBL) has been introduced as an educational concept at Eindhoven University of Technology (TU/e) in 1997, in which students work co-operatively and actively on multidisciplinary design tasks (Wijnen, 2000). Theoretically DBL is not well underpinned. It has been researched

  4. Software Engineering Techniques for Computer-Aided Learning.

    Science.gov (United States)

    Ibrahim, Bertrand

    1989-01-01

    Describes the process for developing tutorials for computer-aided learning (CAL) using a programing language rather than an authoring system. The workstation used is described, the use of graphics is discussed, the role of a local area network (LAN) is explained, and future plans are discussed. (five references) (LRW)

  5. Outsourced design services lessons learned from LHC civil engineering

    CERN Document Server

    Watson, T

    2003-01-01

    In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

  6. Gaming, texting, learning? Teaching engineering ethics through students' lived experiences with technology.

    Science.gov (United States)

    Voss, Georgina

    2013-09-01

    This paper examines how young peoples' lived experiences with personal technologies can be used to teach engineering ethics in a way which facilitates greater engagement with the subject. Engineering ethics can be challenging to teach: as a form of practical ethics, it is framed around future workplace experience in a professional setting which students are assumed to have no prior experience of. Yet the current generations of engineering students, who have been described as 'digital natives', do however have immersive personal experience with digital technologies; and experiential learning theory describes how students learn ethics more successfully when they can draw on personal experience which give context and meaning to abstract theories. This paper reviews current teaching practices in engineering ethics; and examines young people's engagement with technologies including cell phones, social networking sites, digital music and computer games to identify social and ethical elements of these practices which have relevance for the engineering ethics curricula. From this analysis three case studies are developed to illustrate how facets of the use of these technologies can be drawn on to teach topics including group work and communication; risk and safety; and engineering as social experimentation. Means for bridging personal experience and professional ethics when teaching these cases are discussed. The paper contributes to research and curriculum development in engineering ethics education, and to wider education research about methods of teaching 'the net generation'.

  7. Examining E-Learning Barriers as Perceived by Faculty Members of Engineering Colleges in the Jordanian Universities

    Science.gov (United States)

    Al-Alawneh, Muhammad K.

    2014-01-01

    Employing computer's technology that includes e-learning system in the field of Engineering is a vital issue which needs to be discussed. Therefore, this study purposed to examine e-learning barriers as perceived by faculty members of engineering in three major universities in Jordan (Yarmouk University, Jordan University of Science and…

  8. The Implementation and Evaluation of a Project-Oriented Problem-Based Learning Module in a First Year Engineering Programme

    Science.gov (United States)

    McLoone, Seamus C.; Lawlor, Bob J.; Meehan, Andrew R.

    2016-01-01

    This paper describes how a circuits-based project-oriented problem-based learning educational model was integrated into the first year of a Bachelor of Engineering in Electronic Engineering programme at Maynooth University, Ireland. While many variations of problem based learning exist, the presented model is closely aligned with the model used in…

  9. Design and implementation of a flipped classroom learning environment in the biomedical engineering context.

    Science.gov (United States)

    Corrias, Alberto; Cho Hong, James Goh

    2015-01-01

    The design and implementation of a learning environment that leverages on the use of various technologies is presented. The context is an undergraduate core engineering course within the biomedical engineering curriculum. The topic of the course is data analysis in biomedical engineering problems. One of the key ideas of this study is to confine the most mathematical and statistical aspects of data analysis in prerecorded video lectures. Students are asked to watch the video lectures before coming to class. Since the classroom session does not need to cover the mathematical theory, the time is spent on a selected real world scenario in the field of biomedical engineering that exposes students to an actual application of the theory. The weekly cycle is concluded with a hands-on tutorial session in the computer rooms. A potential problem would arise in such learning environment if the students do not follow the recommendation of watching the video lecture before coming to class. In an attempt to limit these occurrences, two key instruments were put in place: a set of online self-assessment questions that students are asked to take before the classroom session and a simple rewards system during the classroom session. Thanks to modern learning analytics tools, we were able to show that, on average, 57.9% of students followed the recommendation of watching the video lecture before class. The efficacy of the learning environment was assessed through various means. A survey was conducted among the students and the gathered data support the view that the learning environment was well received by the students. Attempts were made to quantify the impacts on learning of the proposed measures by taking into account the results of selected questions of the final examination of the course. Although the presence of confounding factors demands caution in the interpretation, these data seem to indicate a possible positive effect of the use of video lectures in this technologically

  10. Annotated Bibliography of EDGE2D Use

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Strachan and G. Corrigan

    2005-06-24

    This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables.

  11. 2D NMR studies of biomolecules

    International Nuclear Information System (INIS)

    Lamerichs, R.M.J.N.

    1989-01-01

    The work described in this thesis comprises two related subjects. The first part describes methods to derive high-resolution structures of proteins in solution using two-dimensional (2-D) NMR. The second part describes 2-D NMR studies on the interaction between proteins and DNA. (author). 261 refs.; 52 figs.; 23 tabs

  12. Tamoxifen and CYP2D6

    DEFF Research Database (Denmark)

    Cronin-Fenton, Deirdre P.; Damkier, Per

    2018-01-01

    Tamoxifen reduces the rate of breast cancer recurrence by about one-half. It is converted to more active metabolites by enzymes encoded by polymorphic genes, including cytochrome P450 2D6 (CYP2D6) and transported by ATP-binding cassette transporters. Genetic polymorphisms that confer reduced CYP2...

  13. Annotated Bibliography of EDGE2D Use

    International Nuclear Information System (INIS)

    Strachan, J.D.; Corrigan, G.

    2005-01-01

    This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables

  14. On the Learning Behaviours of English Additional-Language Speakers Entering Engineering Education in South Africa

    Science.gov (United States)

    Woollacott, L.; Simelane, Z.; Inglis, J.

    2011-01-01

    This article reports the findings of an inductive study on the learning behaviours and language difficulties of a small group of English additional-language students entering a school of chemical and metallurgical engineering in South Africa. Students were interviewed in their home language. While they appeared to have had a reasonable grounding…

  15. Improving Science Scores of Middle School Students with Learning Disabilities through Engineering Problem Solving Activities

    Science.gov (United States)

    Starling, A. Leyf Peirce; Lo, Ya-Yu; Rivera, Christopher J.

    2015-01-01

    This study evaluated the differential effects of three different science teaching methods, namely engineering teaching kit (ETK), explicit instruction (EI), and a combination of the two methods (ETK+EI), in two sixth-grade science classrooms. Twelve students with learning disabilities (LD) and/or attention deficit hyperactivity disorder (ADHD)…

  16. Informal Learning in Science, Math, and Engineering Majors for African American Female Undergraduates

    Science.gov (United States)

    McPherson, Ezella

    2014-01-01

    This research investigates how eight undergraduate African American women in science, math, and engineering (SME) majors accessed cultural capital and informal science learning opportunities from preschool to college. It uses the multiple case study methodological approach and cultural capital as frameworks to better understand the participants'…

  17. Comparisons between physics-based, engineering, and statistical learning models for outdoor sound propagation.

    Science.gov (United States)

    Hart, Carl R; Reznicek, Nathan J; Wilson, D Keith; Pettit, Chris L; Nykaza, Edward T

    2016-05-01

    Many outdoor sound propagation models exist, ranging from highly complex physics-based simulations to simplified engineering calculations, and more recently, highly flexible statistical learning methods. Several engineering and statistical learning models are evaluated by using a particular physics-based model, namely, a Crank-Nicholson parabolic equation (CNPE), as a benchmark. Narrowband transmission loss values predicted with the CNPE, based upon a simulated data set of meteorological, boundary, and source conditions, act as simulated observations. In the simulated data set sound propagation conditions span from downward refracting to upward refracting, for acoustically hard and soft boundaries, and low frequencies. Engineering models used in the comparisons include the ISO 9613-2 method, Harmonoise, and Nord2000 propagation models. Statistical learning methods used in the comparisons include bagged decision tree regression, random forest regression, boosting regression, and artificial neural network models. Computed skill scores are relative to sound propagation in a homogeneous atmosphere over a rigid ground. Overall skill scores for the engineering noise models are 0.6%, -7.1%, and 83.8% for the ISO 9613-2, Harmonoise, and Nord2000 models, respectively. Overall skill scores for the statistical learning models are 99.5%, 99.5%, 99.6%, and 99.6% for bagged decision tree, random forest, boosting, and artificial neural network regression models, respectively.

  18. Effect of Continuous Assessment on Learning Outcomes on Two Chemical Engineering Courses: Case Study

    Science.gov (United States)

    Tuunila, R.; Pulkkinen, M.

    2015-01-01

    In this paper, the effect of continuous assessment on the learning outcomes of two chemical engineering courses is studied over a several-year period. Average grades and passing percentages of courses after the final examination are reported and also student feedback on the courses is collected. The results indicate significantly better learning…

  19. Digital Games, Gender and Learning in Engineering: Do Females Benefit as Much as Males?

    Science.gov (United States)

    Joiner, Richard; Iacovides, Jo; Owen, Martin; Gavin, Carl; Clibbery, Stephen; Darling, Jos; Drew, Ben

    2011-01-01

    The aim of this paper was to explore whether there is a gender difference in the beneficial effects of Racing Academy, which is a video game used to support undergraduate students learning of Mechanical Engineering. One hundred and thirty-eight undergraduate students (15 females and 123 males) participated in the study. The students completed a…

  20. Enhancing Student Learning in Food Engineering Using Computational Fluid Dynamics Simulations

    Science.gov (United States)

    Wong, Shin Y.; Connelly, Robin K.; Hartel, Richard W.

    2010-01-01

    The current generation of students coming into food science and engineering programs is very visually oriented from their early experiences. To increase their interest in learning, new and visually appealing teaching materials need to be developed. Two diverse groups of students may be identified based on their math skills. Food science students…

  1. Effect of Middle School Students' Motivation to Learn Technology on Their Attitudes toward Engineering

    Science.gov (United States)

    Kwon, Hyuksoo

    2016-01-01

    The purpose of this study was to investigate the effect of motivation to learn technology, as perceived by South Korean middle school students, on their attitudes toward engineering. Using the instruments of Glynn et al. (2011) and Lee (2008), the study focused on eighth and ninth grade students in four middle schools located in South Korea's…

  2. Puzzle-Based Learning in Engineering Mathematics: Students' Attitudes

    Science.gov (United States)

    Klymchuk, Sergiy

    2017-01-01

    The article reports on the results of two case studies on the impact of the regular use of puzzles as a pedagogical strategy in the teaching and learning of engineering mathematics. The intention of using puzzles is to engage students' emotions, creativity and curiosity and also to enhance their generic thinking skills and lateral thinking…

  3. Incorporating Sustainability into Engineering and Chemical Education Using E-Learning

    Directory of Open Access Journals (Sweden)

    Edmond Sanganyado

    2018-03-01

    Full Text Available The purpose of this study was to develop e-learning activities that could facilitate the integration of sustainability concepts and practices in engineering and chemical education. Using an online learning management system (LMS, undergraduate students in an applied chemistry program at a public university in Zimbabwe participated in an online discussion on the role of chemical reaction engineering in achieving environmental sustainability goals. In the second activity, the students were instructed to prepare a design report for a cost-effective and innovative wastewater treatment plant for a rural hospital. The design report was evaluated through peer review online. Quantitative and qualitative analyses were performed on the two online activities to evaluate student engagement, quality of responses and the incorporation of sustainability into their learning. In the online discussion, 97 comments were made averaging 120 words per comment. Furthermore, the students averaged 3.88 comments, with the majority of comments exhibiting simple and complex argumentation, a deep reflection and widespread use of terms associated with sustainability such as recycling, pollution, waste and the environment. Furthermore, the evaluation of peer reviews revealed that participants demonstrated they could identify the strengths and shortcomings in the design reports. Therefore, this study demonstrated that e-learning, particularly peer review and online discussion, could help chemistry and engineering students appreciate the need for chemical and engineering activities that encourage sustainable development.

  4. Skill Sets Required for Environmental Engineering and Where They Are Learned

    Science.gov (United States)

    Reed, Kathaleen

    2010-01-01

    The purpose of this study was to investigate the knowledge, skills, abilities and traits environmental engineers need. Two questions were asked: what skills are considered important, and where are they learned? Dreyfus and Dreyfus' novice-to-expert model, which describes a progressive, five-step process of skill development that occurs over time…

  5. Software Engineering Design Principles Applied to Instructional Design: What Can We Learn from Our Sister Discipline?

    Science.gov (United States)

    Adnan, Nor Hafizah; Ritzhaupt, Albert D.

    2018-01-01

    The failure of many instructional design initiatives is often attributed to poor instructional design. Current instructional design models do not provide much insight into design processes for creating e-learning instructional solutions. Given the similarities between the fields of instructional design and software engineering, instructional…

  6. A Systematic Review of Research on the Flipped Learning Method in Engineering Education

    Science.gov (United States)

    Karabulut-Ilgu, Aliye; Jaramillo Cherrez, Nadia; Jahren, Charles T.

    2018-01-01

    The purpose of this article is to describe the current state of knowledge and practice in the flipped learning approach in engineering education and to provide guidance for practitioners by critically appraising and summarizing existing research. This article is a qualitative synthesis of quantitative and qualitative research investigating the…

  7. Science Learning with Information Technologies as a Tool for "Scientific Thinking" in Engineering Education

    Science.gov (United States)

    Smirnov, Eugeny; Bogun, Vitali

    2011-01-01

    New methodologies in science (or mathematics) learning process and scientific thinking in the classroom activity of engineer students with ICT (information and communication technology), including graphic calculator are presented: visual modelling with ICT, action research with graphic calculator, insight in classroom and communications and…

  8. Teaching and learning of interdisciplinary thinking in higher education in engineering

    NARCIS (Netherlands)

    Spelt, E.J.H.

    2015-01-01

    The present thesis research aim was to gain insight in the pedagogical content knowledge for interdisciplinary thinking to enhance student learning across higher education in engineering. In accordance to Boix Mansilla (2010) and Shulman (1987), pedagogical content knowledge was considered in the

  9. Automatic Evaluation of Practices in Moodle for Self Learning in Engineering

    Science.gov (United States)

    Sánchez, Carles; Ramos, Oriol; Márquez, Patricia; Marti, Enric; Rocarias, Jaume; Gil, Debora

    2015-01-01

    The first years in engineering degree courses are usually made of large groups with a low teacher-student ratio. Overcrowding in classrooms hinders continuous assessment much needed to promote independent learning. Therefore, there is a need to apply some kind of automatic evaluation to facilitate the correction of exercises outside the classroom.…

  10. Assessing Cognitive Load Theory to Improve Student Learning for Mechanical Engineers

    Science.gov (United States)

    Impelluso, Thomas J.

    2009-01-01

    A computer programming class for students of mechanical engineering was redesigned and assessed: Cognitive Load Theory was used to redesign the content; online technologies were used to redesign the delivery. Student learning improved and the dropout rate was reduced. This article reports on both attitudinal and objective assessment: comparing…

  11. Case Study of a Project-Based Learning Course in Civil Engineering Design

    Science.gov (United States)

    Gavin, K.

    2011-01-01

    This paper describes the use of project-based learning to teach design skills to civil engineering students at University College Dublin (UCD). The paper first considers the development of problem-based leaning (PBL) as a tool in higher education. The general issues to be considered in the design of the curriculum for a PBL module are reviewed.…

  12. Problem Solving Method Based on E-Learning System for Engineering Education

    Science.gov (United States)

    Khazaal, Hasan F.

    2015-01-01

    Encouraging engineering students to handle advanced technology with multimedia, as well as motivate them to have the skills of solving the problem, are the missions of the teacher in preparing students for a modern professional career. This research proposes a scenario of problem solving in basic electrical circuits based on an e-learning system…

  13. Implementation of a Project-Based Engineering School: Increasing Student Motivation and Relevant Learning

    Science.gov (United States)

    Terrón-López, María-José; García-García, María-José; Velasco-Quintana, Paloma-Julia; Ocampo, Jared; Vigil Montaño, María-Reyes; Gaya-López, María-Cruz

    2017-01-01

    The School of Engineering at Universidad Europea de Madrid (UEM) implemented, starting in the 2012-2013 period, a unified academic model based on project-based learning as the methodology used throughout the entire School. This model expects that every year, in each grade, all the students should participate in a capstone project integrating the…

  14. Teaching Global Engineering in Canada, Learning Informality of the Global South

    Science.gov (United States)

    Gopakumar, Govind

    2014-01-01

    Globalisation has inspired a wide assortment of curricular initiatives within engineering education in the USA and Europe. This interest could be categorised in multiple directions--international exposure, service learning, or critical understanding and praxis. In Canada, however, there has been far less consideration for integrating globalisation…

  15. Enhancement of Teaching and Learning of the Fundamentals of Nuclear Engineering Using Multimedia Courseware.

    Science.gov (United States)

    Keyvan, Shahla A.; Pickard, Rodney; Song, Xiaolong

    1997-01-01

    Computer-aided instruction incorporating interactive multimedia and network technologies can boost teaching effectiveness and student learning. This article describes the development and implementation of network server-based interactive multimedia courseware for a fundamental course in nuclear engineering. A student survey determined that 80% of…

  16. Multiple Learning Strategies Project. Building Maintenance & Engineering. Low Reader. [Vol. 1.

    Science.gov (United States)

    Smith, Dwight; And Others

    This instructional package is one of two designed for low reader students (those reading at a 3-6 grade level) in the vocational area of building maintenance and engineering. The forty-six learning modules are organized into three units: floor care; general maintenance tasks; and restrooms. Each module includes these elements: a performance…

  17. Multiple Learning Strategies Project. Building Maintenance & Engineering. Educable Mentally Impaired. [Vol. 2.

    Science.gov (United States)

    Constantini, Debra; And Others

    This instructional package is one of three designed for educable mentally impaired students in the vocational area of building maintenance and engineering. The thirty-four learning modules are organized into six units: general maintenance tasks; restrooms; chalkboards; carpet care; office cleaning; and grounds. Each module includes these elements:…

  18. Multiple Learning Strategies Project. Building Maintenance & Engineering. Low Reader. [Vol. 2.

    Science.gov (United States)

    Steinberg, A.; And Others

    This instructional package is one of two designed for low reader students (those reading at grade level 3-6) in the vocational area of building maintenance and engineering. The forty-four learning modules are organized into eleven units: chalkboards; carpet care; office cleaning; grounds; sanitation; boiler maintenance and operation; power and…

  19. Multiple Learning Strategies Project. Building Maintenance & Engineering. Regular Vocational. [Vol. 2.

    Science.gov (United States)

    Smith, Dwight; And Others

    This instructional package is one of two designed for regular vocational students in the vocational area of building maintenance and engineering. The fifty-three learning modules are organized into ten units: office cleaning; grounds; sanitation; boiler maintenance and operation; power and hand tools; cabinet construction; repair of damaged…

  20. Multiple Learning Strategies Project. Building Maintenance & Engineering. Educable Mentally Impaired. [Vol. 1.

    Science.gov (United States)

    Smith, Dwight; And Others

    This instructional package is one of three designed for educable mentally impaired students in the vocational area of building maintenance and engineering. The thirty learning modules are organized into two units: floor care and general maintenance tasks. Each module includes these elements: a performance objective page which tells the student…

  1. Long Term Benefits for Women in a Science, Technology, Engineering, and Mathematics Living-Learning Community

    Science.gov (United States)

    Maltby, Jennifer L.; Brooks, Christopher; Horton, Marjorie; Morgan, Helen

    2016-01-01

    Science, technology, engineering and math (STEM) degrees provide opportunities for economic mobility. Yet women, underrepresented minority (URM), and first-generation college students remain disproportionately underrepresented in STEM fields. This study examined the effectiveness of a living-learning community (LLC) for URM and first-generation…

  2. Aspects on Teaching/Learning with Object Oriented Programming for Entry Level Courses of Engineering.

    Science.gov (United States)

    de Oliveira, Clara Amelia; Conte, Marcos Fernando; Riso, Bernardo Goncalves

    This work presents a proposal for Teaching/Learning, on Object Oriented Programming for Entry Level Courses of Engineering and Computer Science, on University. The philosophy of Object Oriented Programming comes as a new pattern of solution for problems, where flexibility and reusability appears over the simple data structure and sequential…

  3. Implementing Motivational Features in Reactive Blended Learning: Application to an Introductory Control Engineering Course

    Science.gov (United States)

    Mendez, J. A.; Gonzalez, E. J.

    2011-01-01

    This paper presents a significant advance in a reactive blended learning methodology applied to an introductory control engineering course. This proposal was based on the inclusion of a reactive element (a fuzzy-logic-based controller) designed to regulate the workload for each student according to his/her activity and performance. The…

  4. A Joint Learning Activity in Process Control and Distance Collaboration between Future Engineers and Technicians

    Science.gov (United States)

    Deschênes, Jean-Sebastien; Barka, Noureddine; Michaud, Mario; Paradis, Denis; Brousseau, Jean

    2013-01-01

    A joint learning activity in process control is presented, in the context of a distance collaboration between engineering and technical-level students, in a similar fashion as current practices in the industry involving distance coordination and troubleshooting. The necessary infrastructure and the setup used are first detailed, followed by a…

  5. Constructing Learning-by-Doing Pedagogical Model for Delivering 21st Century Engineering Education

    Directory of Open Access Journals (Sweden)

    Ghassan Frache

    2018-01-01

    Full Text Available The United Arab Emirates (UAE is dedicated to establishing the best teaching and learning environment for students and staff across all higher education institutions. To heed this call, the engineering division adopted the Learning-by-Doing (LBD pedagogical philosophy for 21st Century education at the heart of its strategic directions. This study intends to explore how LBD is understood and practiced in UAE colleges and how 21st Century skills can be explicitly incorporated into its engineering curriculum by using constructive alignment as a pattern for instructional design. This work intends to investigate the general question: “What constructively aligned Learning-by-Doing pedagogical model, with the incorporation of 21st Century skills, needs to be developed to effectively teach and prepare engineering students at the Higher College of Technology, UAE for successful long-term employment in the global working economy?”. Using mixed method research design and input from its major stakeholders, student survey questionnaires, engineering instructors and dean structured interviews, overt class observation and syllabi examination have all been utilized for data triangulation. In conclusion, the study developed a collaborative LBD model tailor-fitted to the institution’s engineering program and to UAE’s culture.

  6. The Engineering Design Process: Conceptions Along the Learning-to-Teach Continuum

    Science.gov (United States)

    Iveland, Ashley

    In this study, I sought to identify differences in the views and understandings of engineering design among individuals along the learning-to-teach continuum. To do so, I conducted a comprehensive review of literature to determine the various aspects of engineering design described in the fields of professional engineering and engineering education. Additionally, I reviewed literature on the methods used in teaching engineering design at the secondary (grade 7-12) level - to describe the various models used in classrooms, even before the implementation of the Next Generation Science Standards (NGSS Lead States, 2013). Last, I defined four groups along the learning-to-teach continuum: prospective, preservice, and practicing teachers, as well as teacher educators. The context of this study centered around a California public university, including an internship program where undergraduates engaged with practicing mentor teachers in science and engineering teaching at local high schools, and a teacher education program where secondary science preservice teachers and the teacher educators who taught them participated. Interviews were conducted with all participants to gain insights into their views and understandings of engineering design. Prospective and preservice teachers were interviewed multiple times throughout the year and completed concept maps of the engineering design process multiple times as well; practicing teachers and teacher educators were interviewed once. Three levels of analyses were conducted. I identified 30 aspects of engineering discussed by participants. Through phenomenographic methods, I also constructed six conceptual categories for engineering design to organize those aspects most commonly discussed. These categories were combined to demonstrate a participant's view of engineering design (e.g., business focused, human centered, creative, etc.) as well as their complexity of understanding of engineering design overall (the more categories

  7. The Impact of Structured Writing and Developing Awareness of Learning Preferences on the Performance and Attitudes of Engineering Teams

    Science.gov (United States)

    Dahm, Kevin; Newell, James; Newell, Heidi; Harvey, Roberta

    2009-01-01

    This paper discusses efforts to develop metacognition in teams of engineering students by: first, exploring personal learning patterns, and second, ongoing biweekly journaling exercises. Thirty-three junior and senior engineering students (30 chemical engineer, one each from mechanical, civil and electrical) working on semester-long projects in…

  8. Engineering and malaria control: learning from the past 100 years

    DEFF Research Database (Denmark)

    Konradsen, Flemming; van der Hoek, Wim; Amerasinghe, Felix P

    2004-01-01

    Traditionally, engineering and environment-based interventions have contributed to the prevention of malaria in Asia. However, with the introduction of DDT and other potent insecticides, chemical control became the dominating strategy. The renewed interest in environmental-management-based approa......Traditionally, engineering and environment-based interventions have contributed to the prevention of malaria in Asia. However, with the introduction of DDT and other potent insecticides, chemical control became the dominating strategy. The renewed interest in environmental......-management-based approaches for the control of malaria vectors follows the rapid development of resistance by mosquitoes to the widely used insecticides, the increasing cost of developing new chemicals, logistical constraints involved in the implementation of residual-spraying programs and the environmental concerns linked...... cases are discussed in the wider context of environment-based approaches for the control of malaria vectors, including current relevance. Clearly, some of the interventions piloted and implemented early in the last century still have relevance today but generally in a very site-specific manner...

  9. Mind map learning for advanced engineering study: case study in system dynamics

    Science.gov (United States)

    Woradechjumroen, Denchai

    2018-01-01

    System Dynamics (SD) is one of the subjects that were use in learning Automatic Control Systems in dynamic and control field. Mathematical modelling and solving skills of students for engineering systems are expecting outcomes of the course which can be further used to efficiently study control systems and mechanical vibration; however, the fundamental of the SD includes strong backgrounds in Dynamics and Differential Equations, which are appropriate to the students in governmental universities that have strong skills in Mathematics and Scientifics. For private universities, students are weak in the above subjects since they obtained high vocational certificate from Technical College or Polytechnic School, which emphasize the learning contents in practice. To enhance their learning for improving their backgrounds, this paper applies mind maps based problem based learning to relate the essential relations of mathematical and physical equations. With the advantages of mind maps, each student is assigned to design individual mind maps for self-leaning development after they attend the class and learn overall picture of each chapter from the class instructor. Four problems based mind maps learning are assigned to each student. Each assignment is evaluated via mid-term and final examinations, which are issued in terms of learning concepts and applications. In the method testing, thirty students are tested and evaluated via student learning backgrounds in the past. The result shows that well-design mind maps can improve learning performance based on outcome evaluation. Especially, mind maps can reduce time-consuming and reviewing for Mathematics and Physics in SD significantly.

  10. Professional development for design-based learning in engineering education: a case study

    Science.gov (United States)

    Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

    2015-01-01

    Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects. We conducted an intervention for the professional development of the DBL teachers in the Mechanical Engineering and the Electrical Engineering departments. We used the Experiential Learning Cycle as an educational model for the professionalisation programme. The findings show that the programme encouraged teachers to apply the DBL theoretical framework. However, there are some limitations with regard to specific project characteristics. Further research into supporting teachers to develop open-ended and multidisciplinary activities in the projects that support learning is recommended.

  11. The Rise of Student-to-Student Learning: Youth-led Programs Impacting Engineering Education Globally

    Directory of Open Access Journals (Sweden)

    Julian O'Shea

    2011-07-01

    Full Text Available Around the globe, students and young engineers are playing an increasing role in the coordination and delivery of engineering education programs. Many youth-led initiatives are now conducted with students involved in all aspects of their creation, organisation and delivery. This trend presents an exciting opportunity for the education of engineering students, both those involved in delivery of the courses and for participants. This paper profiles four leading youth-led engineering education programs and analyses their structure and growth in recent years. Profiled are initiatives coordinated by Engineers Without Borders – Australia (EWB-A; the Board of European Students of Technology (BEST; the Electrical Engineering Students’ European Association (EESTEC; and the Student Platform for Engineering Education Development (SPEED. Each case study includes a brief history of the organisation, program overview, growth analysis and future projections. The common features amongst these programs were analysed, as were the aspects which made them distinct from traditional university offerings. Key findings about the initiatives include: an international focus; the mixture of formal learning and social aspects; an integral role of volunteers within the organisation; the use of residential programs; and the role of internal professional development of committee members and volunteers. Additionally, this paper outlines the benefits for universities and provides a guide for how engineering faculties can support and nurture these initiatives and effectively create partnerships.

  12. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    Science.gov (United States)

    Hamid, Nasri A.; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri

    2015-04-01

    the progress of teaching and learning in nuclear engineering and technology at UNITEN that include curriculum development, students' enrolment and performance, and teaching staff's human resource development.

  13. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    International Nuclear Information System (INIS)

    Hamid, Nasri A.; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri

    2015-01-01

    the progress of teaching and learning in nuclear engineering and technology at UNITEN that include curriculum development, students’ enrolment and performance, and teaching staff’s human resource development

  14. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    Energy Technology Data Exchange (ETDEWEB)

    Hamid, Nasri A., E-mail: Nasri@uniten.edu.my; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri [Nuclear Energy Center, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia)

    2015-04-29

    describes the progress of teaching and learning in nuclear engineering and technology at UNITEN that include curriculum development, students’ enrolment and performance, and teaching staff’s human resource development.

  15. Light field morphing using 2D features.

    Science.gov (United States)

    Wang, Lifeng; Lin, Stephen; Lee, Seungyong; Guo, Baining; Shum, Heung-Yeung

    2005-01-01

    We present a 2D feature-based technique for morphing 3D objects represented by light fields. Existing light field morphing methods require the user to specify corresponding 3D feature elements to guide morph computation. Since slight errors in 3D specification can lead to significant morphing artifacts, we propose a scheme based on 2D feature elements that is less sensitive to imprecise marking of features. First, 2D features are specified by the user in a number of key views in the source and target light fields. Then the two light fields are warped view by view as guided by the corresponding 2D features. Finally, the two warped light fields are blended together to yield the desired light field morph. Two key issues in light field morphing are feature specification and warping of light field rays. For feature specification, we introduce a user interface for delineating 2D features in key views of a light field, which are automatically interpolated to other views. For ray warping, we describe a 2D technique that accounts for visibility changes and present a comparison to the ideal morphing of light fields. Light field morphing based on 2D features makes it simple to incorporate previous image morphing techniques such as nonuniform blending, as well as to morph between an image and a light field.

  16. Project LASER: Learning about science, engineering, and research

    Science.gov (United States)

    1990-01-01

    The number of American students entering science and engineering careers and their ranking in comparison with other countries is on the decline. This decline has alarmed Congress which, in 1987, established a Task Force on Women, Minorities, and the Handicapped in Science and Technology to define the problem and find solutions. If left unchanged, the task force has warned that the prospects for maintaining an advanced industrial society will diminish. NASA is supportive of the six goals outlined by the task force, which are paraphrase herein, and is carefully assessing its education programs to identify those offering the greatest potential for achieving the task force objectives with a reasonable range of resources. A major initiative is under way on behalf of NASA at its Marshall Space Flight Center, where highly effective features of several NASA education programs along with innovations are being integrated into a comprehensive pilot program. This program, dubbed Project LASER, is discussed.

  17. Lessons learned from metabolic engineering of cyanogenic glucosides

    DEFF Research Database (Denmark)

    Morant, Anne Vinther; Jørgensen, Kirsten; Jørgensen, Bodil

    2007-01-01

    Plants produce a plethora of secondary metabolites which constitute a wealth of potential pharmaceuticals, pro-vitamins, flavours, fragrances, colorants and toxins as well as a source of natural pesticides. Many of these valuable compounds are only synthesized in exotic plant species or in concen......Plants produce a plethora of secondary metabolites which constitute a wealth of potential pharmaceuticals, pro-vitamins, flavours, fragrances, colorants and toxins as well as a source of natural pesticides. Many of these valuable compounds are only synthesized in exotic plant species...... or in concentrations too low to facilitate commercialization. In some cases their presence constitutes a health hazard and renders the crops unsuitable for consumption. Metabolic engineering is a powerful tool to alter and ameliorate the secondary metabolite composition of crop plants and gain new desired traits...

  18. Implementation of Simulation Based-Concept Attainment Method to Increase Interest Learning of Engineering Mechanics Topic

    Science.gov (United States)

    Sultan, A. Z.; Hamzah, N.; Rusdi, M.

    2018-01-01

    The implementation of concept attainment method based on simulation was used to increase student’s interest in the subjects Engineering of Mechanics in second semester of academic year 2016/2017 in Manufacturing Engineering Program, Department of Mechanical PNUP. The result of the implementation of this learning method shows that there is an increase in the students’ learning interest towards the lecture material which is summarized in the form of interactive simulation CDs and teaching materials in the form of printed books and electronic books. From the implementation of achievement method of this simulation based concept, it is noted that the increase of student participation in the presentation and discussion as well as the deposit of individual assignment of significant student. With the implementation of this method of learning the average student participation reached 89%, which before the application of this learning method only reaches an average of 76%. And also with previous learning method, for exam achievement of A-grade under 5% and D-grade above 8%. After the implementation of the new learning method (simulation based-concept attainment method) the achievement of Agrade has reached more than 30% and D-grade below 1%.

  19. Leveraging knowledge engineering and machine learning for microbial bio-manufacturing.

    Science.gov (United States)

    Oyetunde, Tolutola; Bao, Forrest Sheng; Chen, Jiung-Wen; Martin, Hector Garcia; Tang, Yinjie J

    2018-05-03

    Genome scale modeling (GSM) predicts the performance of microbial workhorses and helps identify beneficial gene targets. GSM integrated with intracellular flux dynamics, omics, and thermodynamics have shown remarkable progress in both elucidating complex cellular phenomena and computational strain design (CSD). Nonetheless, these models still show high uncertainty due to a poor understanding of innate pathway regulations, metabolic burdens, and other factors (such as stress tolerance and metabolite channeling). Besides, the engineered hosts may have genetic mutations or non-genetic variations in bioreactor conditions and thus CSD rarely foresees fermentation rate and titer. Metabolic models play important role in design-build-test-learn cycles for strain improvement, and machine learning (ML) may provide a viable complementary approach for driving strain design and deciphering cellular processes. In order to develop quality ML models, knowledge engineering leverages and standardizes the wealth of information in literature (e.g., genomic/phenomic data, synthetic biology strategies, and bioprocess variables). Data driven frameworks can offer new constraints for mechanistic models to describe cellular regulations, to design pathways, to search gene targets, and to estimate fermentation titer/rate/yield under specified growth conditions (e.g., mixing, nutrients, and O 2 ). This review highlights the scope of information collections, database constructions, and machine learning techniques (such as deep learning and transfer learning), which may facilitate "Learn and Design" for strain development. Copyright © 2018. Published by Elsevier Inc.

  20. Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers

    Science.gov (United States)

    Cadoni, Ezio; Botturi, Luca; Forni, Daniele

    2008-01-01

    A goal of engineering and architecture bachelor and master's programs is to provide students with practical and technical preparation in the mechanical characterization of materials and structures: future architects and civil engineers should be able to recognize and describe different construction materials and their behavior when used for…

  1. The Impact of Problem-Based Learning on Engineering Students' Beliefs about Physics and Conceptual Understanding of Energy and Momentum

    Science.gov (United States)

    Sahin, Mehmet

    2010-01-01

    The purpose of this paper is to investigate the impact of problem-based learning (PBL) on freshmen engineering students' beliefs about physics and physics learning (referred to as epistemological beliefs) and conceptual understanding of physics. The multiple-choice test of energy and momentum concepts and the Colorado learning attitudes about…

  2. The Positive Influence of Active Learning in a Lecture Hall: An Analysis of Normalised Gain Scores in Introductory Environmental Engineering

    Science.gov (United States)

    Kinoshita, Timothy J.; Knight, David B.; Gibbes, Badin

    2017-01-01

    Burgeoning college enrolments and insufficient funding to higher education have expanded the use of large lecture courses. As this trend continues, it is important to ensure that students can still learn in those challenging learning environments. Within education broadly and undergraduate engineering specifically, active learning pedagogies have…

  3. 2D Barcode for DNA Encoding

    OpenAIRE

    Elena Purcaru; Cristian Toma

    2011-01-01

    The paper presents a solution for endcoding/decoding DNA information in 2D barcodes. First part focuses on the existing techniques and symbologies in 2D barcodes field. The 2D barcode PDF417 is presented as starting point. The adaptations and optimizations on PDF417 and on DataMatrix lead to the solution - DNA2DBC - DeoxyriboNucleic Acid Two Dimensional Barcode. The second part shows the DNA2DBC encoding/decoding process step by step. In conclusions are enumerated the most important features ...

  4. Knowledge management through the e-learning approach - a case study of online engineering courses

    Science.gov (United States)

    Aichouni, Mohamed; Benchicou, Soraya; Nehari, Dris

    2013-06-01

    Though it is universally accepted that the face-to-face approach is the best way for education and training, however, with the advent of the information and communication technologies (mainly the World Wide Web) it became possible to enhance further the methods we are using to teach our students and to share the teaching material within a broaden engineering, technical and business communities. This paper is dedicated to making a review of the basic concepts of knowledge management and e-learning and to show how these two modern concepts can be integrated into engineering education to produce knowledge, disseminate it and share it within virtual interest groups and networks of engineering students, academic teachers and industrial engineers and technicians and business managers. A practical case study will be presented and discussed.

  5. Active learning in practice: Implementation of the principles of active learning in an engineering course

    DEFF Research Database (Denmark)

    Rützou, C.

    2017-01-01

    The most common form of teaching is still the form where a teacher presents the subject of the lecture to a listening audience. During teaching history this has proved to be an effective way of teaching, however the probability of students being inactive is high and the learning outcome may...... through the same curriculum as usual during a term? • Will Active Learning reduce failure rate? • Will Active Learning give a higher learning outcome than traditional teaching? This paper deals with the results of this experiment, answers the mentioned questions and presents a way to implement Active...

  6. Hybridized Plasmons in 2D Nanoslits: From Graphene to Anisotropic 2D Materials

    DEFF Research Database (Denmark)

    Gonçalves, P. A. D.; Xiao, Sanshui; Peres, N. M. R.

    2017-01-01

    of arbitrary width, and remains valid irrespective of the 2D conductive material (e.g., doped graphene, 2D transition metal dichalcogenides, or phosphorene). We derive the dispersion relation of the hybrid modes of a 2D nanoslit along with the corresponding induced potential and electric field distributions...

  7. Improving the Teaching of ICT Engineering using Flipped Learning: a personalized model and a case study

    Directory of Open Access Journals (Sweden)

    Abdelhak Aqqal

    Full Text Available Abstract In recent years, Flipped Classroom started to be used as an effective way of teaching Engineering among various strategies in higher education. However, enabling and using the flipped learning is a complicated task, not a straightforward goal that can be simply achieved through a combination of face-to-face and online activities. It requires a more sophisticated understanding of effective teaching methods to manage the shift from the traditional to the flipped learning and the optimum adaptation of technology as part of this change. Given this challenge, this research work provides a personalized model of the flipped classroom and investigates through a case study in an Engineering School how our approach can be used to improve teaching of Information and Communication Technology (ICT Engineering. It assesses by using empirically data related to the interaction of the various actors at different levels of abstraction, particularly from a gender perspective, the relevance and the impact of the flipped classroom on student learning and achievement in ICT Engineering Education.

  8. Matrix models of 2d gravity

    International Nuclear Information System (INIS)

    Ginsparg, P.

    1991-01-01

    These are introductory lectures for a general audience that give an overview of the subject of matrix models and their application to random surfaces, 2d gravity, and string theory. They are intentionally 1.5 years out of date

  9. Automata learning algorithms and processes for providing more complete systems requirements specification by scenario generation, CSP-based syntax-oriented model construction, and R2D2C system requirements transformation

    Science.gov (United States)

    Hinchey, Michael G. (Inventor); Margaria, Tiziana (Inventor); Rash, James L. (Inventor); Rouff, Christopher A. (Inventor); Steffen, Bernard (Inventor)

    2010-01-01

    Systems, methods and apparatus are provided through which in some embodiments, automata learning algorithms and techniques are implemented to generate a more complete set of scenarios for requirements based programming. More specifically, a CSP-based, syntax-oriented model construction, which requires the support of a theorem prover, is complemented by model extrapolation, via automata learning. This may support the systematic completion of the requirements, the nature of the requirement being partial, which provides focus on the most prominent scenarios. This may generalize requirement skeletons by extrapolation and may indicate by way of automatically generated traces where the requirement specification is too loose and additional information is required.

  10. A companion matrix for 2-D polynomials

    International Nuclear Information System (INIS)

    Boudellioua, M.S.

    1995-08-01

    In this paper, a matrix form analogous to the companion matrix which is often encountered in the theory of one dimensional (1-D) linear systems is suggested for a class of polynomials in two indeterminates and real coefficients, here referred to as two dimensional (2-D) polynomials. These polynomials arise in the context of 2-D linear systems theory. Necessary and sufficient conditions are also presented under which a matrix is equivalent to this companion form. (author). 6 refs

  11. Applications of 2D helical vortex dynamics

    DEFF Research Database (Denmark)

    Okulov, Valery; Sørensen, Jens Nørkær

    2010-01-01

    In the paper, we show how the assumption of helical symmetry in the context of 2D helical vortices can be exploited to analyse and to model various cases of rotating flows. From theory, examples of three basic applications of 2D dynamics of helical vortices embedded in flows with helical symmetry...... of the vorticity field are addressed. These included some of the problems related to vortex breakdown, instability of far wakes behind rotors and vortex theory of ideal rotors....

  12. Innovation in engineering education through computer assisted learning and virtual university model

    Science.gov (United States)

    Raicu, A.; Raicu, G.

    2015-11-01

    The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern

  13. Project-based learning with international collaboration for training biomedical engineers.

    Science.gov (United States)

    Krishnan, Shankar

    2011-01-01

    Training biomedical engineers while effectively keeping up with the fast paced scientific breakthroughs and the growth in technical innovations poses arduous challenges for educators. Traditional pedagogical methods are employed for coping with the increasing demands in biomedical engineering (BME) training and continuous improvements have been attempted with some success. Project-based learning (PBL) is an academic effort that challenges students by making them carry out interdisciplinary projects aimed at accomplishing a wide range of student learning outcomes. PBL has been shown to be effective in the medical field and has been adopted by other fields including engineering. The impact of globalization in healthcare appears to be steadily increasing which necessitates the inclusion of awareness of relevant international activities in the curriculum. Numerous difficulties are encountered when the formation of a collaborative team is tried, and additional difficulties occur as the collaboration team is extended to international partners. Understanding and agreement of responsibilities becomes somewhat complex and hence the collaborative project has to be planned and executed with clear understanding by all partners and participants. A model for training BME students by adopting PBL with international collaboration is proposed. The results of previous BME project work with international collaboration fit partially into the model. There were many logistic issues and constraints; however, the collaborative projects themselves greatly enhanced the student learning outcomes. This PBL type of learning experience tends to promote long term retention of multidisciplinary material and foster high-order cognitive activities such as analysis, synthesis and evaluation. In addition to introducing the students to experiences encountered in the real-life workforce, the proposed approach enhances developing professional contracts and global networking. In conclusion, despite

  14. Integrating Creativity Training into Problem and Project-Based Learning (PBL) Curriculum in Engineering Education

    DEFF Research Database (Denmark)

    Zhou, Chunfang

    2012-01-01

    In order to foster creative engineers, a creativity training programme was carried out in medialogy education in a Problem and Project-Based Learning (PBL) environment at Aalborg University, Denmark. This paper focuses on the question of how engineering students perceive the strategy of integrating...... creativity training into a PBL curriculum. A total of 20 medialogy students in the training programme were interviewed. The data shows that the training programme was thought useful and students get benefits such as gaining project work skills, creative concepts and confidence of being creative. However...

  15. Identifying potential misfit items in cognitive process of learning engineering mathematics based on Rasch model

    International Nuclear Information System (INIS)

    Ataei, Sh; Mahmud, Z; Khalid, M N

    2014-01-01

    The students learning outcomes clarify what students should know and be able to demonstrate after completing their course. So, one of the issues on the process of teaching and learning is how to assess students' learning. This paper describes an application of the dichotomous Rasch measurement model in measuring the cognitive process of engineering students' learning of mathematics. This study provides insights into the perspective of 54 engineering students' cognitive ability in learning Calculus III based on Bloom's Taxonomy on 31 items. The results denote that some of the examination questions are either too difficult or too easy for the majority of the students. This analysis yields FIT statistics which are able to identify if there is data departure from the Rasch theoretical model. The study has identified some potential misfit items based on the measurement of ZSTD where the removal misfit item was accomplished based on the MNSQ outfit of above 1.3 or less than 0.7 logit. Therefore, it is recommended that these items be reviewed or revised to better match the range of students' ability in the respective course.

  16. Optimal calibration of variable biofuel blend dual-injection engines using sparse Bayesian extreme learning machine and metaheuristic optimization

    International Nuclear Information System (INIS)

    Wong, Ka In; Wong, Pak Kin

    2017-01-01

    Highlights: • A new calibration method is proposed for dual-injection engines under biofuel blends. • Sparse Bayesian extreme learning machine and flower pollination algorithm are employed in the proposed method. • An SI engine is retrofitted for operating under dual-injection strategy. • The proposed method is verified experimentally under the two idle speed conditions. • Comparison with other machine learning methods and optimization algorithms is conducted. - Abstract: Although many combinations of biofuel blends are available in the market, it is more beneficial to vary the ratio of biofuel blends at different engine operating conditions for optimal engine performance. Dual-injection engines have the potential to implement such function. However, while optimal engine calibration is critical for achieving high performance, the use of two injection systems, together with other modern engine technologies, leads the calibration of the dual-injection engines to a very complicated task. Traditional trial-and-error-based calibration approach can no longer be adopted as it would be time-, fuel- and labor-consuming. Therefore, a new and fast calibration method based on sparse Bayesian extreme learning machine (SBELM) and metaheuristic optimization is proposed to optimize the dual-injection engines operating with biofuels. A dual-injection spark-ignition engine fueled with ethanol and gasoline is employed for demonstration purpose. The engine response for various parameters is firstly acquired, and an engine model is then constructed using SBELM. With the engine model, the optimal engine settings are determined based on recently proposed metaheuristic optimization methods. Experimental results validate the optimal settings obtained with the proposed methodology, indicating that the use of machine learning and metaheuristic optimization for dual-injection engine calibration is effective and promising.

  17. Automatic evaluation of practices in Moodle for Self Learning in Engineering

    Directory of Open Access Journals (Sweden)

    Carles Sanchez

    2015-06-01

    Full Text Available The first years in engineering degree courses are usually made of large groups with a low teacher-student ratio. Overcrowding in classrooms hinders continuous assessment much needed to promote independent learning. Therefore, there is a need to apply some kind of automatic evaluation to facilitate the correction of exercises outside the classroom. We introduce here a first experience using surveys in Moodle 2.0 in order to get an automatic evaluation of practices in our Database course. We report survey valuation of the autonomous learning tool and preliminary statistics assessing correlation to an improvement in the practice exam marks.

  18. Fault Diagnosis for Engine Based on Single-Stage Extreme Learning Machine

    Directory of Open Access Journals (Sweden)

    Fei Gao

    2016-01-01

    Full Text Available Single-Stage Extreme Learning Machine (SS-ELM is presented to dispose of the mechanical fault diagnosis in this paper. Based on it, the traditional mapping type of extreme learning machine (ELM has been changed and the eigenvectors extracted from signal processing methods are directly regarded as outputs of the network’s hidden layer. Then the uncertainty that training data transformed from the input space to the ELM feature space with the ELM mapping and problem of the selection of the hidden nodes are avoided effectively. The experiment results of diesel engine fault diagnosis show good performance of the SS-ELM algorithm.

  19. Post secondary project-based learning in science, technology, engineering and mathematics

    OpenAIRE

    Ralph, Rachel A.

    2016-01-01

    Project-based learning (PjBL - to distinguish from problem-based learning - PBL) has become a recurrent practice in K-12 classroom environments. As PjBL has become prominent in K-12 classrooms, it has also surfaced in post-secondary institutions.  The purpose of this paper is to examine the research that has studied a variety of science, technology, engineering and mathematic subjects using PjBL in post-secondary classrooms. Eleven articles (including qualitative, quantitative and mixed metho...

  20. Photonic band gap engineering in 2D photonic crystals

    Indian Academy of Sciences (India)

    -dimensional photonic crystals with square lattices composed of air holes in dielectric and vice versa i.e., dielectric rods in air, using the plane-wave expansion method are investigated. We then study, how the photonic band gap size is ...

  1. 2d electrical resistivity engineering and hydrogeologic ectrical ...

    African Journals Online (AJOL)

    userpc

    station. In the Wenner-Schlumberger method, the first step is to make all the possible measurements while ... generating 18, 16, 14, 12, 10 and 8 resistivity values respectively in .... strong tidal waves and storm, serves a habitat for crustaceous ...

  2. A study of the relationship between learning styles and cognitive abilities in engineering students

    Science.gov (United States)

    Hames, E.; Baker, M.

    2015-03-01

    Learning preferences have been indirectly linked to student success in engineering programmes, without a significant body of research to connect learning preferences with cognitive abilities. A better understanding of the relationship between learning styles and cognitive abilities will allow educators to optimise the classroom experience for students. The goal of this study was to determine whether relationships exist between student learning styles, as determined by the Felder-Soloman Inventory of Learning Styles (FSILS), and their cognitive performance. Three tests were used to assess student's cognitive abilities: a matrix reasoning task, a Tower of London task, and a mental rotation task. Statistical t-tests and correlation coefficients were used to quantify the results. Results indicated that the global-sequential, active-referential, and visual-verbal FSILS learning styles scales are related to performance on cognitive tasks. Most of these relationships were found in response times, not accuracy. Differences in task performance between gender groups (male and female) were more notable than differences between learning styles groups.

  3. Nuclear engineering 24/7 via distance learning: Course development and management experiences

    International Nuclear Information System (INIS)

    Maldonado, G. I.; Christenson, J.; Spitz, H.; Rutz, E.; Todd, A.

    2006-01-01

    This article summarizes a few lessons learned in our early experiences in developing, delivering and implementing a series of distance learning classes for full-time undergraduate students enrolled in the combined-degree BS Mechanical + MS Nuclear Engineering 5-year and co-op based 'MNE- ACCEND' program at the Univ. of Cincinnati. This program is in its third year since inception and currently hosts approximately 35 undergraduate students enrolled in the graduating classes of 2008, 2009, and 2010, which is when these students are expected to complete their BS Mechanical and MS Nuclear Engineering degrees. In addition, 20+ newly confirmed students are expected to enter this program in the fall quarter of 2006 to become our Class of 2011. Therefore, the successful 'follow through' of the DL component of this program continues to be increasingly crucial as this student pipeline reaches a targeted steady-state of about 10 to 15 graduates per class. (authors)

  4. Science, technology, engineering, mathematics (STEM) as mathematics learning approach in 21st century

    Science.gov (United States)

    Milaturrahmah, Naila; Mardiyana, Pramudya, Ikrar

    2017-08-01

    This 21st century demands competent human resources in science, technology, engineering design and mathematics so that education is expected to integrate the four disciplines. This paper aims to describe the importance of STEM as mathematics learning approach in Indonesia in the 21st century. This paper uses a descriptive analysis research method, and the method reveals that STEM education growing in developed countries today can be a framework for innovation mathematics in Indonesia in the 21st century. STEM education integrate understanding of science, math skills, and the available technology with the ability to perform engineering design process. Implementation of mathematics learning with STEM approach makes graduates trained in using of mathematics knowledge that they have to create innovative products that are able to solve the problems that exist in society.

  5. Evaluation of FCS self and peer-assessment approach based on Cooperative and Engineering Design learning.

    Science.gov (United States)

    Cvetkovic, Dean

    2013-01-01

    The Cooperative Learning in Engineering Design curriculum can be enhanced with structured and timely self and peer assessment teaching methodologies which can easily be applied to any Biomedical Engineering curriculum. A study was designed and implemented to evaluate the effectiveness of this structured and timely self and peer assessment on student team-based projects. In comparing the 'peer-blind' and 'face-to-face' Fair Contribution Scoring (FCS) methods, both had advantages and disadvantages. The 'peer-blind' self and peer assessment method would cause high discrepancy between self and team ratings. But the 'face-to-face' method on the other hand did not have the discrepancy issue and had actually proved to be a more accurate and effective, indicating team cohesiveness and good cooperative learning.

  6. Mixed reality learning spaces for collaborative experimentation: A challenge for engineering education and training

    Directory of Open Access Journals (Sweden)

    Dieter Müller

    2007-10-01

    Full Text Available Although the vast majority of research in human-computer interaction involves only our senses of sight and hearing, with sporadic forays into touch, future laboratories used in engineering education will mostly benefit from developments beyond video and sound. Tangible and embedded interaction, augmented and mixed reality characterizes ultimate technologies for further applications in collaborative remote engineering and lab work. This paper presents our latest research to facilitate collaborative experimentation with such innovative technologies. Our vision is a collaborative learning space, which involves an amalgam of real, virtual and remote lab tools to support a wide spectrum of simple and complex, concrete and abstract, safe and dangerous experimentation settings. We will review related concepts and discuss lessons learned from our research and prototype development. Recent work involves the use of mixed reality (as opposed to ‘pure’ virtual reality techniques to support seamless collaborative work between remote sites. We describe this and identify areas for future research.

  7. RELATED VOCATIONAL INTEREST TO LEARNING AND ENTREPRENEURIAL LEARNING ACHIEVEMENT WITH ENTREPRENEURSHIP INTEREST ON THE STUDENS AUTOMOTIVE ENGINEERING ISLAMIC VOCATIONAL SCHOOL YOGYAKARTA ACADEMIC YEAR 2013/2014

    OpenAIRE

    Choiruddin Nurcholis Suwondo; Subagyo Subagyo

    2014-01-01

    The purpose of the study (1) to determine whether there is a positive relationship between vocational interest to learning with entrepreneurship interest on the studens Automotive Engineering Islamic Vocational School Yogyakarta Academic Year 2013/2014; (2) to determine whether there is a positive relationship between entrepreneurial learning achivement with entrepreneurship interest on the studens Automotive Engineering Islamic Vocational School Yogyakarta Academic Year 2013/2014; (3) to det...

  8. Elementary Students' Learning of Materials Science Practices Through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-12-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine students who participated in engineering design-based science instruction with the goal of constructing a stable, quiet, thermally comfortable model house. The learning outcome of materials science practices was assessed by clinical interviews conducted before and after the instruction, and the learning process was assessed by students' workbooks completed during the instruction. The interviews included two materials selection tasks for designing a sturdy stepstool and an insulated pet habitat. Results indicate that: (1) students significantly improved on both materials selection tasks, (2) their gains were significantly positively associated with the degree of completion of their workbooks, and (3) students who were highly engaged with the workbook's reflective record-keeping tasks showed the greatest improvement on the interviews. These findings suggest the important role workbooks can play in facilitating elementary students' learning of science through authentic activity such as engineering design.

  9. EXPLORING THE PROBLEMS FACED BY TECHNICAL SCHOOL STUDENTS IN LEARNING ENGINEERING COURSES

    Directory of Open Access Journals (Sweden)

    RAMLEE MUSTAPHA

    2014-12-01

    Full Text Available The teaching of engineering courses is relatively challenging due to the nature of the courses that are perceived as “difficult courses” by a number of students. Thus, the purpose of this action research was to explore the problems faced by electrical and electronic engineering (PKEE students studying a difficult topic–transistor. This research was also aimed at identifying the students’ attitude towards Problem-based Learning (PBL. Literature has shown that PBL could enhance students’ understanding and make the learning more meaningful. The theoretical framework of this study was based on Kemmis and Mc Taggart model. Cooperative learning method was also utilised in this study consisted of Jigsaw technique in the first and second rounds of the study. In the final round, the discussion method was used. In an action research design, a classroom is a usual research site. Thus, an engineering class of 30 Form 5 students in a Technical School was selected. The PBL method was applied in the class for a nine-week duration. Empirical data were gathered from peer assessment, observation, and pre- and post-tests. The data were described descriptively using frequency, mean and standard deviation. The main results show that the students were more interactive and their post-test result shows significant increases. In terms of the attitude towards PBL, the participants rated PBL highly. The participants also assert that the main benefits of PBL include enhancing their collaborative and problem-solving skills.

  10. Learning through projects in the training of biomedical engineers: an application experience

    Science.gov (United States)

    Gambi, José Antonio Li; Peme, Carmen

    2011-09-01

    Learning through Projects in the curriculum consists of both the identification and analysis of a problem, and the design of solution, execution and evaluation strategies, with teams of students. The project is conceived as the creation of a set of strategies articulated and developed during a certain amount of time to solve a problem contextualized in situations continually changing, where the constant evaluation provides feedback to make adjustments. In 2009, Learning through Projects was applied on the subject Hospital Facilities and three intervention projects were developed in health centers. This first stage is restricted to the analysis of the aspects that are considered to be basic to the professional training: a) Context knowledge: The future biomedical engineers must be familiarized with the complex health system where they will develop their profession; b) Team work: This is one of the essential skills in the training of students, since Biomedical Engineering connects the knowledge of sciences of life with the knowledge of exact sciences and technology; c) Regulations: The activities related to the profession require the implementation of regulations; therefore, to be aware of and to apply these regulations is a fundamental aspect to be analyzed in this stage; d) Project evaluation: It refers to the elaboration and studying of co-evaluation reports, which helps to find out if Learning through Projects contributes to the training. This new line of investigation has the purpose of discovering if the application of this learning strategy makes changes in the training of students in relation to their future professional career. The findings of this ongoing investigation will allow for the analysis of the possibility of extending its application. Key words: engineering, biomedical, learning, projects, strategies.

  11. FísicActiva: applying active learning strategies to a large engineering lecture

    Science.gov (United States)

    Auyuanet, Adriana; Modzelewski, Helena; Loureiro, Silvia; Alessandrini, Daniel; Míguez, Marina

    2018-01-01

    This paper presents and analyses the results obtained by applying Active Learning techniques in overcrowded Physics lectures at the University of the Republic, Uruguay. The course referred to is Physics 1, the first Physics course that all students of the Faculty of Engineering take in their first semester for all the Engineering-related careers. Qualitative and quantitative data corresponding to three semesters are shown and discussed, indicating that the students that attended these lectures outperformed the students that followed the course in the traditional way: the pass rates increased, whereas the failure rates decreased. The students highly valued this methodology, in particular, the interactive and relaxed dynamics, highlighting the concern of professors to answer questions by means of new questions so as to promote reasoning. The results obtained point to a work path that deserves to be deepened and extended to other Engineering courses.

  12. Persistence of physics and engineering students via peer mentoring, active learning, and intentional advising

    Science.gov (United States)

    McCavit, K.; Zellner, N. E. B.

    2016-11-01

    Albion College, a private, undergraduate-only, liberal arts college in Michigan, USA, has developed and implemented a low-cost peer-mentoring programme that blends personal and academic support to help students achieve academic success in the introductory courses required for the Physics Major or the Dual-Degree Program in Engineering. This enhanced mentoring programme provides much-needed assistance for undergraduate students to master introductory physics and mathematics coursework, to normalise the struggle of learning hard material, and to accept their identity as physics or engineering students (among other goals). Importantly, this programme has increased retention among entering science, technology, engineering and mathematics students at Albion College as they move through the introductory classes, as shown by a 20% increase in retention from first-semester to third-semester physics courses compared to years when this programme was not in place.

  13. A Project-based Learning curricular approach in a Production Engineering Program

    Directory of Open Access Journals (Sweden)

    Simone Borges Simão Monteiro

    2017-09-01

    Full Text Available Abstract The Industrial Engineering undergraduate program offered at the University of Brasília was structured on Project Based Learning (PBL methodology. This innovative educational proposal allows the students to deploy their technical competencies through real problem solving situations. The methodology also stimulates the development of the students’ soft skills, by exposing them to a challenging environment. At the end of each project, the results are presented to an external agent, and are subsequently implemented. The objective of this paper is to present the evolution of the PSP courses, which adopt as guidelines both the PMBOK project management framework, as well as content from specific technical courses related to the project’s subject. One other relevant aspect of the PSP courses is their involvement of both undergraduate and graduate students from different Engineering areas, such as Industrial, Mechanical and Civil Engineering, which serves to foster a more holistic and integrated problem-solving skillset.

  14. Student-inspired activities for the teaching and learning of engineering ethics.

    Science.gov (United States)

    Alpay, E

    2013-12-01

    Ethics teaching in engineering can be problematic because of student perceptions of its subjective, ambiguous and philosophical content. The use of discipline-specific case studies has helped to address such perceptions, as has practical decision making and problem solving approaches based on some ethical frameworks. However, a need exists for a wider range of creative methods in ethics education to help complement the variety of activities and learning experiences within the engineering curriculum. In this work, a novel approach is presented in which first-year undergraduate students are responsible for proposing ethics education activities of relevance to their peers and discipline area. The students are prepared for the task through a short introduction on engineering ethics, whereby generic frameworks for moral and professional conduct are discussed, and discipline and student-relevance contexts provided. The approach has been used in four departments of engineering at Imperial College London, and has led to the generation of many creative ideas for wider student engagement in ethics awareness, reflection and understanding. The paper presents information on the premise of the introductory sessions for supporting the design task, and an evaluation of the student experience of the course and task work. Examples of proposals are given to demonstrate the value of such an approach to teachers, and ultimately to the learning experiences of the students themselves.

  15. Digital Games, Gender and Learning in Engineering: Do Females Benefit as Much as Males?

    Science.gov (United States)

    Joiner, Richard; Iacovides, Jo; Owen, Martin; Gavin, Carl; Clibbery, Stephen; Darling, Jos; Drew, Ben

    2011-04-01

    The aim of this paper was to explore whether there is a gender difference in the beneficial effects of Racing Academy, which is a video game used to support undergraduate students learning of Mechanical Engineering. One hundred and thirty-eight undergraduate students (15 females and 123 males) participated in the study. The students completed a pre-test a week before they started using Racing Academy. The pre-test consisted of a test of students' knowledge of engineering, and a measure of students' motivation towards studying engineering. A week after using Racing Academy the students completed a post-test which was identical to the pre-test, except it also included a measure of how frequently they used Racing Academy and how motivating the students found playing Racing Academy. We found that after playing Racing Academy the students learnt more about engineering and there was no gender difference in the beneficial effect of Racing Academy, however there is some evidence that, female students found Racing Academy more motivating than male students. The implications for the use and design of video games for supporting learning for both males and females are discussed.

  16. Orthotropic Piezoelectricity in 2D Nanocellulose.

    Science.gov (United States)

    García, Y; Ruiz-Blanco, Yasser B; Marrero-Ponce, Yovani; Sotomayor-Torres, C M

    2016-10-06

    The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V -1 , ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.

  17. Automatic Contour Extraction from 2D Image

    Directory of Open Access Journals (Sweden)

    Panagiotis GIOANNIS

    2011-03-01

    Full Text Available Aim: To develop a method for automatic contour extraction from a 2D image. Material and Method: The method is divided in two basic parts where the user initially chooses the starting point and the threshold. Finally the method is applied to computed tomography of bone images. Results: An interesting method is developed which can lead to a successful boundary extraction of 2D images. Specifically data extracted from a computed tomography images can be used for 2D bone reconstruction. Conclusions: We believe that such an algorithm or part of it can be applied on several other applications for shape feature extraction in medical image analysis and generally at computer graphics.

  18. Orthotropic Piezoelectricity in 2D Nanocellulose

    Science.gov (United States)

    García, Y.; Ruiz-Blanco, Yasser B.; Marrero-Ponce, Yovani; Sotomayor-Torres, C. M.

    2016-10-01

    The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V-1, ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.

  19. Band shift of 2D transition-metal dichalcogenide alloys: size and composition effects

    Science.gov (United States)

    Zhao, Yipeng; Zhang, Zhe; Ouyang, Gang

    2018-04-01

    Band engineering of 2D transition-metal dichalcogenides (2D-TMDs) is a vital task for their applications in electronic and optoelectronic nanodevices. In this study, we investigate the joint effect from size and composition contributions on the band shift of 2D-TMD alloys in terms of atomic bond relaxation consideration. A theoretical model is proposed to pursue the underlying mechanism, which can connect the band offset with the atomic bonding identities in the 2D-TMD alloys. We reveal that the bandgap of 2D-TMD alloys presents a bowing shape owing to the size-dependent interaction among atoms and shows blue shift or red shift due to different intermixing of components. It is demonstrated that both size and composition can be performed as the useful methods to modulate the band shift, which suggests an effective way to realize the desirable properties of 2D-TMD alloys.

  20. Active learning in the space engineering education at Technical University of Madrid

    Science.gov (United States)

    Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

    This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

  1. THE USE OF INDUSTRIAL VISITS TO ENHANCE LEARNING AT ENGINEERING COURSES

    Directory of Open Access Journals (Sweden)

    TIRUNELVELI N. P. PADMESH

    2013-04-01

    Full Text Available Industrial visits represent an important activity in any engineering undergraduate programme that contributes to the achievement of various essential learning outcomes and programme objectives. This paper reports on an attempt to make the industrial visit an integral part of the Engineering Design and Communication course. This is achieved through identifying learning outcomes and a suitable industrial site to achieve them. For this purpose a thermal power plant was indentified as a site to be visited by students. The visit was planned to help students to achieve the learning outcomes. A number of questions in form of surveys, related to the learning outcomes, were prepared and given to the students to answer. The pre-visit, after-visit, and post-visit surveys were aimed at priming the minds of the students, gauging the level of satisfaction, and assessing the level of retention of knowledge, respectively. Students found this method very useful and they were able to remember a fair bit of information after about semester from the trip date. Our assessment of this exercise is the objectives have been achieved.

  2. Pedagogies to Achieve Sustainability Learning Outcomes in Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Angela R. Bielefeldt

    2013-10-01

    Full Text Available The civil and environmental engineering disciplines have identified the levels of knowledge about sustainability that are desirable for students to achieve as they graduate with a bachelor’s degree, as well as sustainability-related competencies to be obtained during a master’s degree, and on-the-job, prior to professional licensure. Different pedagogies are better suited to help students attain these levels of cognitive ability, while also developing affective outcomes. This paper provides examples of different methods that have been used at one institution to educate engineering students about sustainability, supported with data that indicates whether the method successfully achieved the targeted learning outcomes. Lectures, in-class active learning, readings, and appropriately targeted homework assignments can achieve basic sustainability knowledge and comprehension by requiring students to define, identify, and explain aspects of sustainability. Case studies and the application of software tools are good methods to achieve application and analysis competencies. Project-based learning (PBL and project-based service-learning (PBSL design projects can reach the synthesis level and may also develop affective outcomes related to sustainability. The results provide examples that may apply to a wider range of disciplines and suggest sustainability outcomes that are particularly difficult to teach and/or assess.

  3. Explorative analysis of 2D color maps

    OpenAIRE

    Steiger, Martin; Bernard, Jürgen; Thum, Simon; Mittelstädt, Sebastian; Hutter, Marco; Keim, Daniel A.; Kohlhammer, Jörn

    2015-01-01

    Color is one of the most important visual variables in information visualization. In many cases, two-dimensional information can be color-coded based on a 2D color map. A variety of color maps as well as a number of quality criteria for the use of color have been presented. The choice of the best color map depends on the analytical task users intend to perform and the design space in choosing an appropriate 2D color map is large. In this paper, we present the ColorMap-Explorer, a visual-inter...

  4. The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

    Science.gov (United States)

    Ryan, R. S.

    1992-03-01

    The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

  5. The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

    Science.gov (United States)

    Ryan, R. S.

    1992-01-01

    The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

  6. Examining E-Learning Barriers As Perceived By Faculty 
Members Of Engineering Colleges In The Jordanian Universities

    OpenAIRE

    Muhammad K. AL-ALAWNEH,

    2014-01-01

    Employing computer's technology that includes e-learning system in the field of Engineering is a vital issue which needs to be discussed. Therefore, this study purposed to examine e-learning barriers as perceived by faculty members of engineering in three major universities in Jordan (Yarmouk University, Jordan University of Science and Technology, and Al-Balqaa Applied University) in the second semester of 2012. The study's instrument was distributed to collect the data from a sam...

  7. Special Aspects of Learning Objectives Design for Disciplines in Engineering Education

    Directory of Open Access Journals (Sweden)

    Yu. B. Tsvetkov

    2015-01-01

    Full Text Available The article is devoted to a problem of learning objectives design for disciplines in engineering education. It is shown that the system of well defined objectives can form a basis of discipline content analysis, acquisition control and improvement.The detailed defining of clear objectives and designing forms and content of objectives which allow to estimate their achievement are considered.For this purpose the objectives should consider the level of learners, to designate result which they will be able to show after training, conditions and how well they will be able to make it.Some examples of objective formulations are provided which allow to show in an explicit form the results reached by a learner.It is shown that cognitive process dimension can be divided into groups of initial level of thinking (to remember, understand, apply and thinking of high level (to analyze, estimate, create.Thus knowledge dimension include the factual, conceptual, procedural and metacognitive knowledges.On the basis of cognitive process dimension and knowledge dimension in engineering education it is offered to form system of learning objectives on the basis of their twodimensional classification - taxonomy.Objectives examples for engineering discipline are given. They consider conditions of their achievement and criteria of execution for various combinations of cognitive process dimension and levels of knowledge dimension.For some engineering disciplines examples of learning objectives are formulated including their achievement and criterion of execution of the corresponding actions.The given results can form a basis for design of learning objectives at realization of a competence approach in modern engineering education.Further work in this direction preplan the analysis and approbation of two-dimensional matrix applicability for objectives design on examples of various engineering disciplines.It is of profound importance to use matrixes of well defined

  8. Aircraft height estimation using 2-D radar

    CSIR Research Space (South Africa)

    Hakl, H

    2010-01-01

    Full Text Available A method to infer height information from an aircraft tracked with a single 2-D search radar is presented. The method assumes level flight in the target aircraft and a good estimate of the speed of the aircraft. The method yields good results...

  9. 2D PIM Simulation Based on COMSOL

    DEFF Research Database (Denmark)

    Wang, Xinbo; Cui, Wanzhao; Wang, Jingyu

    2011-01-01

    Passive intermodulation (PIM) is a problematic type of nonlinear distortion en- countered in many communication systems. To analyze the PIM distortion resulting from ma- terial nonlinearity, a 2D PIM simulation method based on COMSOL is proposed in this paper. As an example, a rectangular wavegui...

  10. 2-D model for electrokinetic remediation

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Maroto, J.M.; Garcia Delgado, R.A.; Gomez Lahoz, C.; Garcia Herruzo, F. [Dept. de Ingenieria Quimica, Univ. de Malaga (Spain); Vereda Alonso, C. [Dept. de Ingenieria Quimica, Univ. de Malaga (Spain)]|[Inst. for Geologi and Geoteknik, Danmarks Tekniske Univ., Lyngby (Denmark)

    2001-07-01

    A simple two-dimensional numerical model is presented in this work. In this case, the model is used to examine the enhanced method of the electrokinetic remediation technique in a 2-D arrangement. Nevertheless the model with minor changes can also be used to study the effect of the electrode configuration in the performance of this technique. (orig.)

  11. Small polarons in 2D perovskites

    KAUST Repository

    Cortecchia, Daniele

    2017-11-02

    We demonstrate that white light luminescence in two-dimensional (2D) perovskites stems from photoinduced formation of small polarons confined at specific sites of the inorganic framework in the form of self-trapped electrons and holes. We discuss their application in white light emitting devices and X-ray scintillators.

  12. Small polarons in 2D perovskites

    KAUST Repository

    Cortecchia, Daniele; Yin, Jun; Birowosuto, Muhammad D.; Lo, Shu-Zee A.; Gurzadyan, Gagik G.; Bruno, Annalisa; Bredas, Jean-Luc; Soci, Cesare

    2017-01-01

    We demonstrate that white light luminescence in two-dimensional (2D) perovskites stems from photoinduced formation of small polarons confined at specific sites of the inorganic framework in the form of self-trapped electrons and holes. We discuss their application in white light emitting devices and X-ray scintillators.

  13. Advancing Integrated STEM Learning through Engineering Design: Sixth-Grade Students' Design and Construction of Earthquake Resistant Buildings

    Science.gov (United States)

    English, Lyn D.; King, Donna; Smeed, Joanna

    2017-01-01

    As part of a 3-year longitudinal study, 136 sixth-grade students completed an engineering-based problem on earthquakes involving integrated STEM learning. Students employed engineering design processes and STEM disciplinary knowledge to plan, sketch, then construct a building designed to withstand earthquake damage, taking into account a number of…

  14. Organizational Learning, Knowledge Management Practices and Firm's Performance: An Empirical Study of a Heavy Engineering Firm in India

    Science.gov (United States)

    Jain, Ajay K.; Moreno, Ana

    2015-01-01

    Purpose: The study aims at investigating the impact of organizational learning (OL) on the firm's performance and knowledge management (KM) practices in a heavy engineering organization in India. Design/Methodology/Approach: The data were collected from 205 middle and senior executives working in the project engineering management division of a…

  15. TEACHERS' PERSPECTIVE ABOUT FACTORS THAT PREVENT SUCCESS IN TEACHING AND LEARNING PROCESS IN HIGHER EDUCATION OF ENGINEERING IN BRAZIL

    Directory of Open Access Journals (Sweden)

    Gláucia Nolasco de Almeida Mello

    2016-12-01

    Full Text Available The last fifteen years, in Brazil, the number of engineering freshmen had a huge increased and, although the number of graduated also had increased over the same period, the percentage of engineering freshmen are by far higher than engineers graduated. In this context, there is a clear evidence of the high dropout rate in higher education courses of engineering in Brazil. Once most of developed researches about engineering courses dropout in Brazil are focused in the students and institutions point of view about factors that affect dropout rate, in this research it was investigated the professors perspective to answer the three questions: (1 What are the main factors which prevent success in teaching and learning process identified by professors of engineering during the classes? (2 How can professors to improve the teaching and learning process in higher education courses of engineering in Brazil? (3 How can Higher Education Institutions (HEI support the professors? The research data were collected through team activities developed with 134 professors of higher education courses of engineering. This research reveals that the most important factors that affect negatively the teaching and learning process are related to inadequate high school preparation and behaviour of students. Main suggestions of professors for improving the teaching and learning process and also students' motivation are related to pedagogical aspects such as: use of Information and Communication Technologies (ICTs as support of classes and implementation of professor and student support programs with significant participation of HEI.

  16. HYPER-­TVT: Development and Implementation of an Interactive Learning Environment for Students of Chemical and Process Engineering

    Science.gov (United States)

    Santoro, Marina; Mazzotti, Marco

    2006-01-01

    Hyper-TVT is a computer-aided education system that has been developed at the Institute of Process Engineering at the ETH Zurich. The aim was to create an interactive learning environment for chemical and process engineering students. The topics covered are the most important multistage separation processes, i.e. fundamentals of separation…

  17. Attitudes towards mathematics as a subject and mathematics learning and instruction in a trans-disciplinary engineering study

    DEFF Research Database (Denmark)

    Triantafyllou, Evangelia; Misfeldt, Morten; Timcenko, Olga

    2016-01-01

    This article explores student attitudes and preferences in learning and teaching of mathematics in engineering studies that transcend the division between technical, scientific and artistic disciplines. For observing such attitudes, we have developed a model that relates the attitude towards...... by a teacher. We propose that these findings inspire reforming mathematical education for such engineering students....

  18. Deep Cuboid Detection: Beyond 2D Bounding Boxes

    OpenAIRE

    Dwibedi, Debidatta; Malisiewicz, Tomasz; Badrinarayanan, Vijay; Rabinovich, Andrew

    2016-01-01

    We present a Deep Cuboid Detector which takes a consumer-quality RGB image of a cluttered scene and localizes all 3D cuboids (box-like objects). Contrary to classical approaches which fit a 3D model from low-level cues like corners, edges, and vanishing points, we propose an end-to-end deep learning system to detect cuboids across many semantic categories (e.g., ovens, shipping boxes, and furniture). We localize cuboids with a 2D bounding box, and simultaneously localize the cuboid's corners,...

  19. Bridging the Design-Science Gap with Tools: Science Learning and Design Behaviors in a Simulated Environment for Engineering Design

    Science.gov (United States)

    Chao, Jie; Xie, Charles; Nourian, Saeid; Chen, Guanhua; Bailey, Siobhan; Goldstein, Molly H.; Purzer, Senay; Adams, Robin S.; Tutwiler, M. Shane

    2017-01-01

    Many pedagogical innovations aim to integrate engineering design and science learning. However, students frequently show little attempt or have difficulties in connecting their design projects with the underlying science. Drawing upon the Cultural-Historical Activity Theory, we argue that the design tools available in a learning environment…

  20. Fullness of life as minimal unit: Science, technology, engineering, and mathematics (STEM) learning across the life span.

    NARCIS (Netherlands)

    Roth, W.-M.; Eijck, van M.W.

    2011-01-01

    Challenged by a National Science Foundation–funded conference, 2020 Vision: The Next Generation of STEM Learning Research, in which participants were asked to recognize science, technology, engineering, and mathematics (STEM) learning as lifelong, life-wide, and life-deep, we draw upon 20 years of

  1. First-Year Mathematics and Its Application to Science: Evidence of Transfer of Learning to Physics and Engineering

    Science.gov (United States)

    Nakakoji, Yoshitaka; Wilson, Rachel

    2018-01-01

    Transfer of mathematical learning to science is seen as critical to the development of education and industrial societies, yet it is rarely interrogated in applied research. We present here research looking for evidence of transfer from university mathematics learning in semester one to second semester sciences/engineering courses (n = 1125). A…

  2. Machine Learning Technologies and Their Applications for Science and Engineering Domains Workshop -- Summary Report

    Science.gov (United States)

    Ambur, Manjula; Schwartz, Katherine G.; Mavris, Dimitri N.

    2016-01-01

    The fields of machine learning and big data analytics have made significant advances in recent years, which has created an environment where cross-fertilization of methods and collaborations can achieve previously unattainable outcomes. The Comprehensive Digital Transformation (CDT) Machine Learning and Big Data Analytics team planned a workshop at NASA Langley in August 2016 to unite leading experts the field of machine learning and NASA scientists and engineers. The primary goal for this workshop was to assess the state-of-the-art in this field, introduce these leading experts to the aerospace and science subject matter experts, and develop opportunities for collaboration. The workshop was held over a three day-period with lectures from 15 leading experts followed by significant interactive discussions. This report provides an overview of the 15 invited lectures and a summary of the key discussion topics that arose during both formal and informal discussion sections. Four key workshop themes were identified after the closure of the workshop and are also highlighted in the report. Furthermore, several workshop attendees provided their feedback on how they are already utilizing machine learning algorithms to advance their research, new methods they learned about during the workshop, and collaboration opportunities they identified during the workshop.

  3. TRANSITION FROM 2D TO 3D WITH GEOGEBRA

    Directory of Open Access Journals (Sweden)

    MARIA MIHAILOVA

    2014-12-01

    Full Text Available This article presents the definition of projection plane, its importance for the geometry constructions used in civil engineering and comparative analysis of three opportunities for creating a three dimensional basis, used in drawing such a plane. First method consists of transforming affine and orthonormal coordinates and its application in GeoGebra is presented. Second method, using combination of spherical and polar coordinates in space, is introduced. The third suggested method is an application of descriptive geometry for transforming 2D to 3D and a new method of forming a plane of projection, which will be used later in the reviewed example below. The example shows how GeoGebra software can be used in technical drawing used in civil engineering.

  4. Aero Engine Component Fault Diagnosis Using Multi-Hidden-Layer Extreme Learning Machine with Optimized Structure

    Directory of Open Access Journals (Sweden)

    Shan Pang

    2016-01-01

    Full Text Available A new aero gas turbine engine gas path component fault diagnosis method based on multi-hidden-layer extreme learning machine with optimized structure (OM-ELM was proposed. OM-ELM employs quantum-behaved particle swarm optimization to automatically obtain the optimal network structure according to both the root mean square error on training data set and the norm of output weights. The proposed method is applied to handwritten recognition data set and a gas turbine engine diagnostic application and is compared with basic ELM, multi-hidden-layer ELM, and two state-of-the-art deep learning algorithms: deep belief network and the stacked denoising autoencoder. Results show that, with optimized network structure, OM-ELM obtains better test accuracy in both applications and is more robust to sensor noise. Meanwhile it controls the model complexity and needs far less hidden nodes than multi-hidden-layer ELM, thus saving computer memory and making it more efficient to implement. All these advantages make our method an effective and reliable tool for engine component fault diagnosis tool.

  5. Application of 2D Non-Graphene Materials and 2D Oxide Nanostructures for Biosensing Technology

    Directory of Open Access Journals (Sweden)

    Kateryna Shavanova

    2016-02-01

    Full Text Available The discovery of graphene and its unique properties has inspired researchers to try to invent other two-dimensional (2D materials. After considerable research effort, a distinct “beyond graphene” domain has been established, comprising the library of non-graphene 2D materials. It is significant that some 2D non-graphene materials possess solid advantages over their predecessor, such as having a direct band gap, and therefore are highly promising for a number of applications. These applications are not limited to nano- and opto-electronics, but have a strong potential in biosensing technologies, as one example. However, since most of the 2D non-graphene materials have been newly discovered, most of the research efforts are concentrated on material synthesis and the investigation of the properties of the material. Applications of 2D non-graphene materials are still at the embryonic stage, and the integration of 2D non-graphene materials into devices is scarcely reported. However, in recent years, numerous reports have blossomed about 2D material-based biosensors, evidencing the growing potential of 2D non-graphene materials for biosensing applications. This review highlights the recent progress in research on the potential of using 2D non-graphene materials and similar oxide nanostructures for different types of biosensors (optical and electrochemical. A wide range of biological targets, such as glucose, dopamine, cortisol, DNA, IgG, bisphenol, ascorbic acid, cytochrome and estradiol, has been reported to be successfully detected by biosensors with transducers made of 2D non-graphene materials.

  6. How do Millennial Engineering and Technology Students Experience Learning Through Traditional Teaching Methods Employed in the University Setting?

    OpenAIRE

    Howard, Elizabeth A

    2011-01-01

    The purpose of the study was to document and analyze how Millennial engineering and technology students experience learning in large lecture classrooms. To help achieve this purpose, perceptions Millennials have toward traditional teaching methods employed in large lecture classes were analyzed and discussed. Additionally, this study documented how Millennials experienced technology within large lecture classrooms. A learning model depicting how Millennials experience learning within the larg...

  7. A Case Study of Designing an E-learning Electrical Engineering Course

    Directory of Open Access Journals (Sweden)

    Sameer Hanna Khader

    2012-08-01

    Full Text Available Abstract: This paper presents a case study of designing an e-learning course in the field of electrical engineering- Industrial automation program at Palestine Polytechnic University. The applied methodology consisting of few stages starting with formulating the major course objectives, extracting topics outcomes, design the appropriate teaching tools and storyboard, and as final stage the evaluation system is designed. On other hand, an information communication technology (ICT questionnaire has been designed and targeting attended in the course students with purpose evaluating student ICT knowledge, knowledge leveling, and treatment their weaknesses. The designed topics are modified according to feedback evaluation obtained from students throughout designed for this purpose questionnaire. The observed weaknesses in course topics have been eliminated and finally the modified course was uploaded to the university e-learning platform. Electrical engineering core course with 300 level was carried out for department students, where the obtained results shows significant enhancement in teaching and learning performances of both course instructors and students.

  8. Implementation of learning outcome attainment measurement system in aviation engineering higher education

    Science.gov (United States)

    Salleh, I. Mohd; Mat Rani, M.

    2017-12-01

    This paper aims to discuss the effectiveness of the Learning Outcome Attainment Measurement System in assisting Outcome Based Education (OBE) for Aviation Engineering Higher Education in Malaysia. Direct assessments are discussed to show the implementation processes that become a key role in the successful outcome measurement system. A case study presented in this paper involves investigation on the implementation of the system in Aircraft Structure course for Bachelor in Aircraft Engineering Technology program in UniKL-MIAT. The data has been collected for five semesters, starting from July 2014 until July 2016. The study instruments used include the report generated in Learning Outcomes Measurements System (LOAMS) that contains information on the course learning outcomes (CLO) individual and course average performance reports. The report derived from LOAMS is analyzed and the data analysis has revealed that there is a positive significant correlation between the individual performance and the average performance reports. The results for analysis of variance has further revealed that there is a significant difference in OBE grade score among the report. Independent samples F-test results, on the other hand, indicate that the variances of the two populations are unequal.

  9. Evolution of project-based learning in small groups in environmental engineering courses

    Directory of Open Access Journals (Sweden)

    Jesús M. Requies

    2018-03-01

    Full Text Available This work presents the assessment of the development and evolution of an active methodology (Project-Based Learning –PBL- implemented on the course “Unit Operations in Environmental Engineering”, within the bachelor’s degree in Environmental Engineering, with the purpose of decreasing the dropout rate in this course. After the initial design and implementation of this methodology during the first academic year (12/13, different modifications were adopted in the following ones (13-14, 14-15 & 15-16 in order to optimize the student’s and professor’s work load as well as correct some malfunctions observed in the initial design of the PBL. This active methodology seeks to make students the main architects of their own learning processes. Accordingly, they have to identify their learning needs, which is a highly motivating approach both for their curricular development and for attaining the required learning outcomes in this field of knowledge. The results obtained show that working in small teams (cooperative work enhances each group member’s self–learning capabilities. Moreover, academic marks improve when compared to traditional learning methodologies. Nevertheless, the implementation of more active methodologies, such as project-based learning, in small groups has certain specific characteristics. In this case it has been implemented simultaneously in two different groups of 10 students each one. Such small groups are more heterogeneoussince the presence of two highly motivated students or not can vary or affect the whole group’s attitude and academic results.

  10. Horns Rev II, 2D-Model Tests

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Brorsen, Michael

    This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), Denmark. The starting point for the present report is the previously carried out run-up tests described in Lykke Andersen & Frigaard, 2006. The......-shaped access platforms on piles. The Model tests include mainly regular waves and a few irregular wave tests. These tests have been conducted at Aalborg University from 9. November, 2006 to 17. November, 2006.......This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), Denmark. The starting point for the present report is the previously carried out run-up tests described in Lykke Andersen & Frigaard, 2006....... The objective of the tests was to investigate the impact pressures generated on a horizontal platform and a cone platform for selected sea states calibrated by Lykke Andersen & Frigaard, 2006. The measurements should be used for assessment of slamming coefficients for the design of horizontal and cone...

  11. A democratic and student-centred approach to facilitating teamwork learning among first-year engineering students: a learning and teaching case study

    Science.gov (United States)

    Missingham, Dorothy; Matthews, Robert

    2014-07-01

    This work examines an innovative and evolving approach to facilitating teamwork learning in a generic first-year mechanical engineering course. Principles of inclusive, student-active and democratic pedagogy were utilised to engage students on both the social and personal planes. Learner opportunities to facilitate, direct and lead the learning direction were emphasised. This emphasis encouraged a rich learning process and motivated students dismissive of the need to examine their communication skills and those who initially perceived the topic as a personal intrusion. Through a sharing of curriculum decisions, a climate of trust, ownership and shared value arose. Students chose from a range of tools across personality-type indicators, learning style indicators and hierarchies of human needs, to assist their capacity to express and discuss engineering designs and concepts. Peer teaching and collaborative exercises were incorporated to provide an authentic learning context and to further the student's sense of ownership.

  12. 2D-deformaatio-animaatio peligrafiikassa

    OpenAIRE

    Falck, Tia

    2017-01-01

    Opinnäytetyössä tavoitteena oli esitellä deformaatio-animaation hyötyjä peligrafiikassa. Esimerkillisenä pelinä käytettiin pääasiassa Vanillawaren Dragon’s Crownian, koska siinä yhdistyvät perinteinen sprite sheet -animaatiota käyttävä peligrafiikka ja animaatiotyyli, jonka pystyisi tekemään helpommin kokonaan 2D-mesh-deformaatiota ja luurankoanimaatiota käyttäen. Projektityön osuudessa käytiin läpi animoidun 2D-hahmon työvaiheet kahdessa eri ohjelmassa, joissa molemmissa pystyi teke...

  13. Flexible 2D layered material junctions

    Science.gov (United States)

    Balabai, R.; Solomenko, A.

    2018-03-01

    Within the framework of the methods of the electron density functional and the ab initio pseudopotential, we have obtained the valence electron density spatial distribution, the densities of electron states, the widths of band gaps, the charges on combined regions, and the Coulomb potentials for graphene-based flexible 2D layered junctions, using author program complex. It is determined that the bending of the 2D layered junctions on the angle α leads to changes in the electronic properties of these junctions. In the graphene/graphane junction, there is clear charge redistribution with different signs in the regions of junctions. The presence in the heterojunctions of charge regions with different signs leads to the formation of potential barriers. The greatest potential jump is in the graphene/fluorographene junction. The greatest value of the band gap width is in the graphene/graphane junction.

  14. Communicate to Learn, Learn to Communicate: A Study of Engineering Students' Communication Strategies in a Mobile-Assisted Learning Environment

    Science.gov (United States)

    Cheng, Li; Lu, Zhihong

    2016-01-01

    This paper reports a 3-month study investigating engineering students' Communication Strategies (CSs) in a mobile-assisted course. 67 Chinese learners of English in this course volunteered to participate in the study. The instruments included oral communication sessions, stimulated recall interviews, WeChat exchanges, etc. Results showed that the…

  15. Design of 2-D rational digital filters

    International Nuclear Information System (INIS)

    Harris, D.B

    1981-01-01

    A novel 2-D rational filter design technique is presented which makes use of a reflection coefficient function (RCF) representation for the filter transfer function. The design problem is formulated in the frequency domain. A least-square error criterion is used though the usual error measure is augmented with barrier functions. These act to restrict the domain of approximation to the set of stable filters. Construction of suitable barrier functions is facilitated by the RCF characterization

  16. Quasiparticle interference in unconventional 2D systems.

    Science.gov (United States)

    Chen, Lan; Cheng, Peng; Wu, Kehui

    2017-03-15

    At present, research of 2D systems mainly focuses on two kinds of materials: graphene-like materials and transition-metal dichalcogenides (TMDs). Both of them host unconventional 2D electronic properties: pseudospin and the associated chirality of electrons in graphene-like materials, and spin-valley-coupled electronic structures in the TMDs. These exotic electronic properties have attracted tremendous interest for possible applications in nanodevices in the future. Investigation on the quasiparticle interference (QPI) in 2D systems is an effective way to uncover these properties. In this review, we will begin with a brief introduction to 2D systems, including their atomic structures and electronic bands. Then, we will discuss the formation of Friedel oscillation due to QPI in constant energy contours of electron bands, and show the basic concept of Fourier-transform scanning tunneling microscopy/spectroscopy (FT-STM/STS), which can resolve Friedel oscillation patterns in real space and consequently obtain the QPI patterns in reciprocal space. In the next two parts, we will summarize some pivotal results in the investigation of QPI in graphene and silicene, in which systems the low-energy quasiparticles are described by the massless Dirac equation. The FT-STM experiments show there are two different interference channels (intervalley and intravalley scattering) and backscattering suppression, which associate with the Dirac cones and the chirality of quasiparticles. The monolayer and bilayer graphene on different substrates (SiC and metal surfaces), and the monolayer and multilayer silicene on a Ag(1 1 1) surface will be addressed. The fifth part will introduce the FT-STM research on QPI in TMDs (monolayer and bilayer of WSe 2 ), which allow us to infer the spin texture of both conduction and valence bands, and present spin-valley coupling by tracking allowed and forbidden scattering channels.

  17. Thermodynamics of 2D string theory

    International Nuclear Information System (INIS)

    Alexandrov, Sergei Yu.; V.A. Fock Department of Theoretical Physics, St. Petersburg University

    2003-01-01

    We calculate the free energy, energy and entropy in the matrix quantum mechanical formulation of 2D string theory in a background strongly perturbed by tachyons with the imaginary minkowskian momentum ±i/R ('Sine-Liouville' theory). The system shows a thermodynamical behaviour corresponding to the temperature T={1/(2π R)}. We show that the microscopically calculated energy of the system satisfies the usual thermodynamical relations and leads to a non-zero entropy. (author)

  18. 2D materials: Graphene and others

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, Suneev Anil, E-mail: suneev@gmail.com; Singh, Amrinder Pal [Deptt. of Mech Engg, UIET, Panjab University, Chandigarh (India); Kumar, Suresh [Deptt. of Applied Sciences, UIET, Panjab University, Chandigarh (India)

    2016-05-06

    Present report reviews the recent advancements in new atomically thick 2D materials. Materials covered in this review are Graphene, Silicene, Germanene, Boron Nitride (BN) and Transition metal chalcogenides (TMC). These materials show extraordinary mechanical, electronic and optical properties which make them suitable candidates for future applications. Apart from unique properties, tune-ability of highly desirable properties of these materials is also an important area to be emphasized on.

  19. Simulation of 2D Granular Hopper Flow

    Science.gov (United States)

    Li, Zhusong; Shattuck, Mark

    2012-02-01

    Jamming and intermittent granular flow are big problems in industry, and the vertical hopper is a canonical example of these difficulties. We simulate gravity driven flow and jamming of 2D disks in a vertical hopper and compare with identical companion experiments presented in this session. We measure and compare the flow rate and probability for jamming as a function of particle properties and geometry. We evaluate the ability of standard Hertz-Mindlin contact mode to quantitatively predict the experimental flow.

  20. Interactive Lab to Learn Radio Astronomy, Microwave & Antenna Engineering at the Technical University of Cartagena (Spain

    Directory of Open Access Journals (Sweden)

    Fernando Daniel Quesada-Pereira

    2011-02-01

    Full Text Available An initiative carried out at the Technical University of Cartagena (UPCT, Spain to encourage students and promote the interest for Scientific and Engineering Culture between society is presented in this contribution. For this purpose, a long-term project based on the set-up of an interactive laboratory surrounding a small Radio Telescope (SRT system has been carried out. The main novelty is that this project is entirely being developed by students of last courses of our Telecommunication Engineering Faculty, under the supervision of four lecturers. This lab offers the possibility to remotely control the SRT, and it provides a set of multimedia web-based applications to produce a novel, practical, multidisciplinary virtual laboratory to improve the learning and teaching processes in related sciences and technologies.

  1. Implementation of a project-based engineering school: increasing student motivation and relevant learning

    Science.gov (United States)

    Terrón-López, María-José; García-García, María-José; Velasco-Quintana, Paloma-Julia; Ocampo, Jared; Vigil Montaño, María-Reyes; Gaya-López, María-Cruz

    2017-11-01

    The School of Engineering at Universidad Europea de Madrid (UEM) implemented, starting in the 2012-2013 period, a unified academic model based on project-based learning as the methodology used throughout the entire School. This model expects that every year, in each grade, all the students should participate in a capstone project integrating the contents and competencies of several courses. This paper presents the academic context under which this experience has been implemented, and a summary of the work done to design and implement the Project-Based Engineering School at the UEM. The steps followed, the structure used, some sample projects, as well as the difficulties and benefits of implementing the programme are discussed in this paper. The results are encouraging as students are more motivated and the initial set objectives were accomplished.

  2. Project-organized learning and the development of competences in Engineering Education for Sustainable Development

    DEFF Research Database (Denmark)

    Guerra, Aida; Holgaard, Jette Egelund; Kolmos, Anette

    2013-01-01

    by the complex and economically driven society and develop innovative technologies to solve and prevent sustainable problems. In this perspective, ESD experts have stressed sustainability aspects as well as cross-disciplinary competences, such as inter-disciplinarity, adaptability, problem solving, critical...... thinking, systems thinking, etc. It is argued that Problem-Based Learning (PBL) provides a suitable framework for developing the competences mentioned, but there is a lack of studies that investigate the room which PBL practice leaves for ESD. In this study, we aim to investigate the staff’s perception......The integration of Education for Sustainable Development (ESD) principles has been claimed for all levels and areas of formal education. The integration of new kinds of competences, skills and knowledge into the engineering curricula aims to prepare future engineers to face the challenges posed...

  3. Education of the Mechanical Engineering Literacy by the Collaboration Learning of the Different Grade

    Science.gov (United States)

    Nakashima, Kenji; Nakaura, Shigeki; Morita, Hidetoshi; Matsuyama, Fuminori; Nishiguchi, Hiroshi; Fukuda, Takayuki

    We trained business ability of the students through the senior instructing younger student system by fourth year students in the class of the practical skill. The theme of the practical skill is the resolution and the assembling of the gasoline engine, the automatic control of the radio control car with the PLC, the learning of dynamics using Mini-Yonku and the operation of the laser cutter. For the fourth students, we can expect an effect of their ability in the future work. For the first students, we can expect an effect for them to be interested in mechanical engineering. Concerning the effects of this project, all the fourth students and teachers discussed, and the effect of the project was evaluated by a poster session. As a result, we have found that more effects than we had expected has been gained.

  4. Learning about Environmental Issues in Engineering Programmes: A Case Study of First-Year Civil Engineering Students' Contextualisation of an Ecology Course

    Science.gov (United States)

    Lundholm, Cecilia

    2004-01-01

    Describes how first-year civil engineering students interpreted the content and structure of an ecology course. Students' learning processes were analysed from an intentional perspective, i.e. a perspective that takes into account the students' educational aims and conceptions of the study situation. Interviews were carried out with six civil…

  5. Learning styles differences among engineering students of daytime and evening classes programs

    Directory of Open Access Journals (Sweden)

    Marco Antonio DÍAZ DÍAZ

    2017-12-01

    Full Text Available The purpose of this exploratory research was to identify if there were any differences in the student’s learning styles of three engineering academic programs from daytime and evening classes. The motivation aroused from the observation that the academic performance of these two populations, in response to equally demanding academic programs, was equivalent, despite having far less demanding requirements for the acceptance in the evening class program. The results of this research showed no relevant differences in the learning styles of the students of the two programs, giving rise to more questions than answers, mainly regarding the motivations of the evening class students and the academic requirements for the acceptance in a tertiary institution. 

  6. Activating learning in engineering education using ICT and the concept of `Flipping the classroom'

    Science.gov (United States)

    Lucke, Terry; Dunn, Peter K.; Christie, Michael

    2017-01-01

    This case study trialled the introduction of a student-response system (Top Hat) in a third-year engineering Fluid Mechanics course (n = 44) to improve student engagement, motivation and cognition. It was recognised that for the potential benefits of student-response systems (SRSs) to be fully realised, more time must be allocated for student engagement and the active learning components of the course. In order to allow sufficient time to fully engage with the SRSs and other classroom activities, traditional lectures were revised and the classroom format was flipped. This paper presents the initial case study results focusing on the use of SRSs. Overall, the new flipped lecture and SRS teaching format demonstrated a substantial increase in the level of student engagement, motivation, active learning and attendance compared to previous cohorts. However, the increased levels of engagement did not appear to reflect on any large increase in students' individual grades.

  7. Project-based learning in a high school engineering program: A case study

    Science.gov (United States)

    France, Todd

    Generating greater student interest in science, technology, engineering, and mathematics (STEM) has been a major topic of discussion among educators, policymakers, and researchers in recent years, as increasing the number of graduates in these fields is widely considered a necessary step for sustaining the progress of today's society. Fostering this interest must occur before students reach college, and substantial efforts have been made to engage students at K-12 levels in STEM-focused learning. Attempts to involve students in engineering, a vital and growing profession, yet one in which students often have little experience, have frequently emphasized the design and construction of physical products, a practice supported by project-based learning. This thesis examines the environment of an engineering high school course that employed the project-based model. The course is part of a dedicated curricular program which aims to provide students with positive experiences in engineering-related activities while also preparing them for the rigors of college. A case study was conducted to provide insight into the benefits and drawbacks of the learning model. The study's outcomes are intended to provide guidance to educators participating in the design and/or facilitation of project-based activities, particularly those involved with engineering education. The research was performed using a qualitative approach. Long-term engagement with course participants was deemed critical to gaining a comprehensive understanding of the interactions and events that transpired on a daily basis. Nine educators involved with the program were interviewed, as were nineteen of the course's thirty-nine students. A wealth of other relevant data -- including surveys, field notes, and evaluations of student work -- was compiled for analysis as well. The study findings suggest that experiences in problem solving and teamwork were the central benefits of the course. Limitations existed due to a

  8. Project Based Learning experiences in the space engineering education at Technical University of Madrid

    Science.gov (United States)

    Rodríguez, Jacobo; Laverón-Simavilla, Ana; del Cura, Juan M.; Ezquerro, José M.; Lapuerta, Victoria; Cordero-Gracia, Marta

    2015-10-01

    This work describes the innovation activities performed in the field of space education since the academic year 2009/10 at the Technical University of Madrid (UPM), in collaboration with the Spanish User Support and Operations Center (E-USOC), the center assigned by the European Space Agency (ESA) in Spain to support the operations of scientific experiments on board the International Space Station. These activities have been integrated within the last year of the UPM Aerospace Engineering degree. A laboratory has been created, where students have to validate and integrate the subsystems of a microsatellite using demonstrator satellites. In parallel, the students participate in a Project Based Learning (PBL) training process in which they work in groups to develop the conceptual design of a space mission. One student in each group takes the role of project manager, another one is responsible for the mission design and the rest are each responsible for the design of one of the satellite subsystems. A ground station has also been set up with the help of students developing their final thesis, which will allow future students to perform training sessions and learn how to communicate with satellites, how to receive telemetry and how to process the data. Several surveys have been conducted along two academic years to evaluate the impact of these techniques in engineering learning. The surveys evaluate the acquisition of specific and generic competences, as well as the students' degree of satisfaction with respect to the use of these learning methodologies. The results of the surveys and the perception of the lecturers show that PBL encourages students' motivation and improves their results. They not only acquire better technical training, but also improve their transversal skills. It is also pointed out that this methodology requires more dedication from lecturers than traditional methods.

  9. Cross-Platform Learning Media Development of Software Installation on Computer Engineering and Networking Expertise Package

    Directory of Open Access Journals (Sweden)

    Afis Pratama

    2018-03-01

    Full Text Available Software Installation is one of the important lessons that must be mastered by student of computer and network engineering expertise package. But there is a problem about the lack of attention and concentration of students in following the teaching and learning process in the subject of installation of the software. The matter must immediately find a solution. This research refers to the technology development that is always increasing. The technology can be used as a tool to support learning activities. Currently, all grade 10 students in public vocational high school (SMK 8 Semarang Indonesia already have a gadget, either a smartphone or a laptop and the intensity of usage is high enough. Based on this phenomenon, this research aims to create a learning media software installation that is cross-platform. It is practical and can be carried easily in a smartphone and a laptop that has different operating system. So that, this media is expected to improve learning outcomes, understanding and enthusiasm of the students in the software installation lesson.

  10. [The use of game engine learning as an education strategy in ecohealth].

    Science.gov (United States)

    Magaña Valladares, Laura; Suárez Conejero, Juana Elvira

    2014-01-01

    This paper analyzes an educational intervention using Game Engine Learning (GELearning) in the project Leadership in Ecohealth for Vector Born Diseases in Latin America and the Caribbean, financed by the IDRC-Canada, and whose training component is coordinated by the National Institute of Public Health of Mexico. GELearning is an educational tool that uses virtual educational games, where participants face real-life situations with clear pedagogical purposes. To learn through GELearning is to simulate situations, very similar to the ones faced in real life. The purpose for using GELearning was to evaluate it as an educational tool, to know the learning impact in participants, as well as to measure how GELearning favored the acquisition of competencies. The results indicate that this tool, besides the benefits already known from the information and communications technologies, contributes to significant learning in an environment that is attractive and stimulating for participants and favors the acquisition of competencies, especially those linked to superior taxonomic levels, which are associated to knowing "how to do" and "how to be".

  11. From 2D to 3D turbulence through 2D3C configurations

    Science.gov (United States)

    Buzzicotti, Michele; Biferale, Luca; Linkmann, Moritz

    2017-11-01

    We study analytically and numerically the geometry of the nonlinear interactions and the resulting energy transfer directions of 2D3C flows. Through a set of suitably designed Direct Numerical Simulations we also study the coupling between several 2D3C flows, where we explore the transition between 2D and fully 3D turbulence. In particular, we find that the coupling of three 2D3C flows on mutually orthogonal planes subject to small-scale forcing leads to a stationary 3D out-of-equilibrium dynamics at the energy containing scales where the inverse cascade is directly balanced by a forward cascade carried by a different subsets of interactions. ERC AdG Grant No 339032 NewTURB.

  12. 2D non-separable linear canonical transform (2D-NS-LCT) based cryptography

    Science.gov (United States)

    Zhao, Liang; Muniraj, Inbarasan; Healy, John J.; Malallah, Ra'ed; Cui, Xiao-Guang; Ryle, James P.; Sheridan, John T.

    2017-05-01

    The 2D non-separable linear canonical transform (2D-NS-LCT) can describe a variety of paraxial optical systems. Digital algorithms to numerically evaluate the 2D-NS-LCTs are not only important in modeling the light field propagations but also of interest in various signal processing based applications, for instance optical encryption. Therefore, in this paper, for the first time, a 2D-NS-LCT based optical Double-random- Phase-Encryption (DRPE) system is proposed which offers encrypting information in multiple degrees of freedom. Compared with the traditional systems, i.e. (i) Fourier transform (FT); (ii) Fresnel transform (FST); (iii) Fractional Fourier transform (FRT); and (iv) Linear Canonical transform (LCT), based DRPE systems, the proposed system is more secure and robust as it encrypts the data with more degrees of freedom with an augmented key-space.

  13. Instant HTMl5 2D platformer

    CERN Document Server

    Temple, Aidan

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. The step-by-step approach taken by this book will show you how to develop a 2D HTML5 platformer-based game that you will be able to publish to multiple devices.This book is great for anyone who has an interest in HTML5 games development, and who already has a basic to intermediate grasp on both the HTML markup and JavaScript programming languages. Therefore, due to this requirement, the book will not discuss the inner workings of either of these languages but will instead attempt to

  14. Gluon amplitudes as 2 d conformal correlators

    Science.gov (United States)

    Pasterski, Sabrina; Shao, Shu-Heng; Strominger, Andrew

    2017-10-01

    Recently, spin-one wave functions in four dimensions that are conformal primaries of the Lorentz group S L (2 ,C ) were constructed. We compute low-point, tree-level gluon scattering amplitudes in the space of these conformal primary wave functions. The answers have the same conformal covariance as correlators of spin-one primaries in a 2 d CFT. The Britto-Cachazo-Feng-Witten (BCFW) recursion relation between three- and four-point gluon amplitudes is recast into this conformal basis.

  15. 2D gravity and random matrices

    International Nuclear Information System (INIS)

    Zinn-Justin, J.

    1990-01-01

    Recent progress in 2D gravity coupled to d ≤ 1 matter, based on a representation of discrete gravity in terms of random matrices, is reported. The matrix problem can be solved in many cases by the introduction of suitable orthogonal polynomials. Alternatively in the continuum limit the orthogonal polynomial method can be shown to be equivalent to the construction of representation of the canonical commutation relations in terms of differential operators. In the case of pure gravity or discrete Ising-like matter the sum over topologies is reduced to the solution of non-linear differential equations. The d = 1 problem can be solved by semiclassical methods

  16. 2-d spectroscopic imaging of brain tumours

    International Nuclear Information System (INIS)

    Ferris, N.J.; Brotchie, P.R.

    2002-01-01

    Full text: This poster illustrates the use of two-dimensional spectroscopic imaging (2-D SI) in the characterisation of brain tumours, and the monitoring of subsequent treatment. After conventional contrast-enhanced MR imaging of patients with known or suspected brain tumours, 2-D SI is performed at a single axial level. The level is chosen to include the maximum volume of abnormal enhancement, or, in non-enhancing lesions. The most extensive T2 signal abnormality. Two different MR systems have been used (Marconi Edge and GE Signa LX); at each site, a PRESS localisation sequence is employed with TE 128-144 ms. Automated software is used to generate spectral arrays, metabolite maps, and metabolite ratio maps from the spectroscopic data. Colour overlays of the maps onto anatomical images are produced using manufacturer software or the Medex imaging data analysis package. High grade gliomas showed choline levels higher than those in apparently normal brain, with decreases in NAA and creatine. Some lesions showed spectral abnormality extending into otherwise normal appearing brain. This was also seen in a case of CNS lymphoma. Lowgrade lesions showed choline levels similar to normal brain, but with decreased NAA. Only a small number of metastases have been studied, but to date no metastasis has shown spectral abnormality beyond the margins suggested by conventional imaging. Follow-up studies generally show spectral heterogeneity. Regions with choline levels higher than those in normal-appearing brain are considered to represent recurrent high-grade tumour. Some regions show choline to be the dominant metabolite, but its level is not greater than that seen in normal brain. These regions are considered suspicious for residual / recurrent tumour when the choline / creatine ratio exceeds 2 (lower ratios may represent treatment effect). 2-D SI improves the initial assessment of brain tumours, and has potential for influencing the radiotherapy treatment strategy. 2-D SI also

  17. Integrator element as a promoter of active learning in engineering teaching

    Science.gov (United States)

    Oliveira, Paulo C.; Oliveira, Cristina G.

    2014-03-01

    In this paper, we present a teaching proposal used in an Introductory Physics course to civil engineering students from Porto's Engineering Institute/Instituto Superior de Engenharia do Porto (ISEP). The proposal was born from the need to change students' perception and motivation for learning physics. It consists in the use of an integrator element, called the physics elevator project. This integrator element allows us to use, in a single project, all the content taught in the course and uses several active learning strategies. In this paper, we analyse this project as: (i) a clarifying element of the contents covered in the course; (ii) a promoter element of motivation and active participation in class and finally and (iii) a link between the contents covered in the course and the 'real world'. The data were collected by a questionnaire and interviews to students. From the data collected, it seems that the integrator element improves students' motivation towards physics and develops several skills that they consider to be important to their professional future. It also acts as a clarifying element and makes the connection between the physics that is taught and the 'real world'.

  18. Application of heuristic and machine-learning approach to engine model calibration

    Science.gov (United States)

    Cheng, Jie; Ryu, Kwang R.; Newman, C. E.; Davis, George C.

    1993-03-01

    Automation of engine model calibration procedures is a very challenging task because (1) the calibration process searches for a goal state in a huge, continuous state space, (2) calibration is often a lengthy and frustrating task because of complicated mutual interference among the target parameters, and (3) the calibration problem is heuristic by nature, and often heuristic knowledge for constraining a search cannot be easily acquired from domain experts. A combined heuristic and machine learning approach has, therefore, been adopted to improve the efficiency of model calibration. We developed an intelligent calibration program called ICALIB. It has been used on a daily basis for engine model applications, and has reduced the time required for model calibrations from many hours to a few minutes on average. In this paper, we describe the heuristic control strategies employed in ICALIB such as a hill-climbing search based on a state distance estimation function, incremental problem solution refinement by using a dynamic tolerance window, and calibration target parameter ordering for guiding the search. In addition, we present the application of a machine learning program called GID3* for automatic acquisition of heuristic rules for ordering target parameters.

  19. Is 'bosonic matter' unstable in 2D?

    CERN Document Server

    Manoukian, E B

    2003-01-01

    An upper bound is derived for the exact ground-state energy in 2D, E sub N <= -(me sup 4 /2 h-bar sup 2)(N sup 3 sup / sup 2 /50 pi sup 2), of 'bosonic matter' consisting of N positive and N negative charges with Coulombic interactions. This is to be compared with the classic N sup 7 sup / sup 5 3D-law of Dyson and gives rise to a more 'violent' collapse of such matter in 2D for large N. The derivation is based on a rigorous analysis which, in the process, controls the negative part of the Hamiltonian over its positive kinetic energy part and detailed estimates needed for counting trial wavefunctions of arbitrary states. A formal dimensional analysis in the style of Dyson alone shows, in arbitrary dimensions of space d = 1, 2, ..., that E sub N approx = -(me sup 4 /2 h-bar sup 2)C sub d N suprho, rho = (d + 4)/(d + 2), where C sub d is a positive constant depending on d, consistent with our rigorous bound, and we are led to conjecture that 'bosonic matter' is unstable in all dimensions.

  20. Gas sensing in 2D materials

    Science.gov (United States)

    Yang, Shengxue; Jiang, Chengbao; Wei, Su-huai

    2017-06-01

    Two-dimensional (2D) layered inorganic nanomaterials have attracted huge attention due to their unique electronic structures, as well as extraordinary physical and chemical properties for use in electronics, optoelectronics, spintronics, catalysts, energy generation and storage, and chemical sensors. Graphene and related layered inorganic analogues have shown great potential for gas-sensing applications because of their large specific surface areas and strong surface activities. This review aims to discuss the latest advancements in the 2D layered inorganic materials for gas sensors. We first elaborate the gas-sensing mechanisms and introduce various types of gas-sensing devices. Then, we describe the basic parameters and influence factors of the gas sensors to further enhance their performance. Moreover, we systematically present the current gas-sensing applications based on graphene, graphene oxide (GO), reduced graphene oxide (rGO), functionalized GO or rGO, transition metal dichalcogenides, layered III-VI semiconductors, layered metal oxides, phosphorene, hexagonal boron nitride, etc. Finally, we conclude the future prospects of these layered inorganic materials in gas-sensing applications.

  1. Multifunctional Cellular Materials Based on 2D Nanomaterials: Prospects and Challenges.

    Science.gov (United States)

    Qiu, Ling; He, Zijun; Li, Dan

    2018-01-01

    Recent advances in emerging 2D nanomaterial-based cellular materials (2D-CMs) open up new opportunities for the development of next generation cellular solids with exceptional properties. Herein, an overview of the current research status of 2D-CMs is provided and their future opportunities are highlighted. First, the unique features of 2D nanomaterials are introduced to illustrate why these nanoscale building blocks are promising for the development of novel cellular materials and what the new features of 2D nanoscale building blocks can offer when compared to their 0D and 1D counterparts. An in-depth discussion on the structure-property relationships of 2D-CMs is then provided, and the remarkable functions that can be achieved by engineering their cellular architecture are highlighted. Additionally, the use of 2D-CMs to tackle key challenges in different practical applications is demonstrated. In conclusion, a personal perspective on the challenges and future research directions of 2D-CMs is given. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Effectiveness of teaching and learning mathematics for Thai university engineering students through a combination of activity and lecture based classroom

    Directory of Open Access Journals (Sweden)

    Parinya S. Ngiamsunthorn

    2014-04-01

    Full Text Available There are concerns of developing effective pedagogical practices for teaching mathematics for engineering students as many engineering students experience difficulties in learning compulsory mathematics subjects in their first and second years of the degree. This paper aims to investigate the effectiveness of using a variety of teaching and learning approaches including lecture based learning, activity based learning, e-learning via learning management system (LMS and practice or tutorial session in mathematics subjects for engineering students. This study was carried out on 160 students who need to enroll three basic mathematics subjects (MTH101, MTH102 and MTH201 for an engineering degree during academic year 2011 – 2012. The students were divided into three groups according to their majors of study. The first two groups of students were given a combination of various teaching approaches for only one semester (either MTH102 or MTH201, while the last group was given a combination of various teaching approaches for two semesters (both MTH102 and MTH201. To evaluate the effectiveness of teaching and learning, examination results, questionnaires on attitude towards teaching and learning, and a formal university teaching evaluation by students were collected and analyzed. It is found that different students perceive mathematics contents from different teaching methods according to their preferred learning styles. Moreover, most students in all groups performed at least the same or better in their final subject (MTH201. However, there is an interesting finding that low proficiency students in earlier mathematics subjects who received a combination of various teaching approaches for two semesters can improve their examination results better than other groups, on average. This is also reflected from an increasing average score on teaching evaluation from this group of students about teaching techniques.

  3. Understanding ill-structured engineering ethics problems through a collaborative learning and argument visualization approach.

    Science.gov (United States)

    Hoffmann, Michael; Borenstein, Jason

    2014-03-01

    As a committee of the National Academy of Engineering recognized, ethics education should foster the ability of students to analyze complex decision situations and ill-structured problems. Building on the NAE's insights, we report about an innovative teaching approach that has two main features: first, it places the emphasis on deliberation and on self-directed, problem-based learning in small groups of students; and second, it focuses on understanding ill-structured problems. The first innovation is motivated by an abundance of scholarly research that supports the value of deliberative learning practices. The second results from a critique of the traditional case-study approach in engineering ethics. A key problem with standard cases is that they are usually described in such a fashion that renders the ethical problem as being too obvious and simplistic. The practitioner, by contrast, may face problems that are ill-structured. In the collaborative learning environment described here, groups of students use interactive and web-based argument visualization software called "AGORA-net: Participate - Deliberate!". The function of the software is to structure communication and problem solving in small groups. Students are confronted with the task of identifying possible stakeholder positions and reconstructing their legitimacy by constructing justifications for these positions in the form of graphically represented argument maps. The argument maps are then presented in class so that these stakeholder positions and their respective justifications become visible and can be brought into a reasoned dialogue. Argument mapping provides an opportunity for students to collaborate in teams and to develop critical thinking and argumentation skills.

  4. A Comparative Study of Vocabulary Learning Strategies Used by Marine Engineering Students and Iranian EFL Learners

    Directory of Open Access Journals (Sweden)

    Davood Mashhadi Heidar

    2017-11-01

    Full Text Available The present study explored the vocabulary learning strategies used by Iranian EFL learners and Marine Engineering (ME students by using the categorization of vocabulary learning strategies proposed by Schmitt (1997. A vocabulary learning strategies questionnaire was administered to 30 EFL learners and 43 ME students. Then, the strategies used by each group were determined and the two groups were compared with each other. It was found that both groups used determination strategies more frequently than social strategies for discovering a new word’s meaning. The most frequently used discovery strategy by both groups was found to be “bilingual dictionary”. The second and third most frequently used strategy for discovery by EFL learners and ME students was found to be “monolingual dictionary” and “guess from textual context”, respectively. It was also revealed that EFL learners used memory strategies more frequently than other strategies for consolidating the meaning of new words and ME students used cognitive strategies the most frequently. Both groups were found to use “verbal repetition” more frequently than all other consolidation strategies. The second most frequently used strategy by EFL learners was “use Englishlanguage media” whilst for ME students they were “written repetition” and “word lists”. The comparison of the strategy use by the participants in the two groups showed no significant difference.

  5. Mechatronic Control Engineering: A Problem Oriented And Project Based Learning Curriculum In Mechatronic

    DEFF Research Database (Denmark)

    Pedersen, Henrik Clemmensen; Andersen, Torben Ole; Hansen, Michael Rygaard

    2008-01-01

    Mechatronics is a field of multidisciplinary engineering that not only requires knowledge about different technical areas, but also insight into how to combine technologies optimally, to design efficient products and systems.This paper addresses the group project based and problem-oriented learning...... the well established methods from control engineering form very powerful techniques in both analysis and synthesis of mechatronic systems. The necessary skills for mechatronic engineers are outlined followed up by a discussion on how problem oriented project based learning is implemented. A complete...... curriculum named Mechatronic Control Engineering is presented, which is started at Aalborg University, Denmark, and the content of the semesters and projects are described. The projects are all characterized by the use of simulation and control for the purpose of analyzing and designing complex commercial...

  6. 2D3 Pilotstudy: Accelerated learning in anaesthetic training

    DEFF Research Database (Denmark)

    Bisgaard, Claus Hedebo; Holdgaard, Hans Ole; Rubak, Sune Leisgaard Mørck

    2011-01-01

    of the one year curriculum. The skills training were assessed with OSATS and global rating scales for each procedure. Summary of results: As assessed with an OSCE the residents accelerated their competencies in airway management and general anaesthesia from week 10-12 to 4, spinal anaesthesia from week 10...

  7. Predicting non-square 2D dice probabilities

    Science.gov (United States)

    Pender, G. A. T.; Uhrin, M.

    2014-07-01

    The prediction of the final state probabilities of a general cuboid randomly thrown onto a surface is a problem that naturally arises in the minds of men and women familiar with regular cubic dice and the basic concepts of probability. Indeed, it was considered by Newton in 1664 (Newton 1967 The Mathematical Papers of Issac Newton vol I (Cambridge: Cambridge University Press) pp 60-1). In this paper we make progress on the 2D problem (which can be realized in 3D by considering a long cuboid, or alternatively a rectangular cross-sectioned dreidel). For the two-dimensional case we suggest that the ratio of the probabilities of landing on each of the two sides is given by \\frac{\\sqrt{{{k}^{2}}+{{l}^{2}}}-k}{\\sqrt{{{k}^{2}}+{{l}^{2}}}-l}\\frac{arctan \\frac{l}{k}}{arctan \\frac{k}{l}} where k and l are the lengths of the two sides. We test this theory both experimentally and computationally, and find good agreement between our theory, experimental and computational results. Our theory is known, from its derivation, to be an approximation for particularly bouncy or ‘grippy’ surfaces where the die rolls through many revolutions before settling. On real surfaces we would expect (and we observe) that the true probability ratio for a 2D die is a somewhat closer to unity than predicted by our theory. This problem may also have wider relevance in the testing of physics engines.

  8. DNN-state identification of 2D distributed parameter systems

    Science.gov (United States)

    Chairez, I.; Fuentes, R.; Poznyak, A.; Poznyak, T.; Escudero, M.; Viana, L.

    2012-02-01

    There are many examples in science and engineering which are reduced to a set of partial differential equations (PDEs) through a process of mathematical modelling. Nevertheless there exist many sources of uncertainties around the aforementioned mathematical representation. Moreover, to find exact solutions of those PDEs is not a trivial task especially if the PDE is described in two or more dimensions. It is well known that neural networks can approximate a large set of continuous functions defined on a compact set to an arbitrary accuracy. In this article, a strategy based on the differential neural network (DNN) for the non-parametric identification of a mathematical model described by a class of two-dimensional (2D) PDEs is proposed. The adaptive laws for weights ensure the 'practical stability' of the DNN-trajectories to the parabolic 2D-PDE states. To verify the qualitative behaviour of the suggested methodology, here a non-parametric modelling problem for a distributed parameter plant is analysed.

  9. Developing Tele-Operated Laboratories for Manufacturing Engineering Education. Platform for E-Learning and Telemetric Experimentation (PeTEX

    Directory of Open Access Journals (Sweden)

    A. Erman Tekkaya

    2010-09-01

    Full Text Available The aim of the PeTEX-project is to establish an e-Learning platform for the development, implementation, and delivery of educational training programs in the field of manufacturing engineering. The PeTEX team designs both: a technical platform for eLearning based on “Moodle” including distributed tele-operated experimentation facilities, and didactic and socio-technical requirements for a successful online learning community. User interfaces are deployed for remote access to instruments, data analysis and multiplexed data access via network protocols. Hence, the platform provides complex tools in order to perform various activities to support the educational process, from telemetric experimentation to virtual project groups for an entire community to the purpose of domain specific learning. This paper describes important steps of interdisciplinary participatory design and development of a remote lab-prototype in the field of manufacturing engineering.

  10. Horns Rev II, 2D-Model Tests

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Frigaard, Peter

    This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU). The objective of the tests was: To investigate the combined influence of the pile diameter to water depth ratio and the wave height to water...... depth ratio on wave run-up of piles. The measurements should be used to design access platforms on piles. The Model tests include: Calibration of regular and irregular sea states at the location of the pile (without structure in place). Measurement of wave run-up for the calibrated sea states...... on the front side of the pile (0 to 90 degrees). These tests have been conducted at Aalborg University from 9. October, 2006 to 8. November, 2006. Unless otherwise mentioned, all values given in this report are in model scale....

  11. Development and Study the Usage of Blended Learning Environment Model Using Engineering Design Concept Learning Activities to Computer Programming Courses for Undergraduate Students of Rajabhat Universities

    Directory of Open Access Journals (Sweden)

    Kasame Tritrakan

    2017-06-01

    Full Text Available The objectives of this research were to study and Synthesise the components, to develop, and to study the usage of blended learning environment model using engineering design concept learning activities to computer programming courses for undergraduate students of Rajabhat universities. The research methodology was divided into 3 phases. Phase I: surveying presents, needs and problems in teaching computer programming of 52 lecturers by using in-depth interview from 5 experienced lecturers. The model’s elements were evaluated by 5 experts. The tools were questionnaire, interview form, and model’s elements assessment form. Phase II: developing the model of blended learning environment and learning activities based on engineering design processes and confirming model by 8 experts. The tools were the draft of learning environment, courseware, and assessment forms. Phase III evaluating the effects of using the implemented environment. The samples were students which formed into 2 groups, 25 people in the experiment group and 27 people in the control group by cluster random sampling. The tools were learning environment, courseware, and assessment tools. The statistics used in this research were means, standard deviation, t-test dependent, and one-way MANOVA. The results found that: 1 Lecturers quite agreed with the physical, mental, social, and information learning environment, learning processes, and assessments. There were all needs in high level. However there were physical environment problems in high level yet quite low in other aspects. 2 The developed learning environment had 4 components which were a 4 types of environments b the inputs included blended learning environment, learning motivation factors, and computer programming content c the processes were analysis of state objectives, design learning environment and activities, developing learning environment and testing materials, implement, ation evaluation and evaluate, 4 the outputs

  12. Vibration Monitoring of Gas Turbine Engines: Machine-Learning Approaches and Their Challenges

    Directory of Open Access Journals (Sweden)

    Ioannis Matthaiou

    2017-09-01

    Full Text Available In this study, condition monitoring strategies are examined for gas turbine engines using vibration data. The focus is on data-driven approaches, for this reason a novelty detection framework is considered for the development of reliable data-driven models that can describe the underlying relationships of the processes taking place during an engine’s operation. From a data analysis perspective, the high dimensionality of features extracted and the data complexity are two problems that need to be dealt with throughout analyses of this type. The latter refers to the fact that the healthy engine state data can be non-stationary. To address this, the implementation of the wavelet transform is examined to get a set of features from vibration signals that describe the non-stationary parts. The problem of high dimensionality of the features is addressed by “compressing” them using the kernel principal component analysis so that more meaningful, lower-dimensional features can be used to train the pattern recognition algorithms. For feature discrimination, a novelty detection scheme that is based on the one-class support vector machine (OCSVM algorithm is chosen for investigation. The main advantage, when compared to other pattern recognition algorithms, is that the learning problem is being cast as a quadratic program. The developed condition monitoring strategy can be applied for detecting excessive vibration levels that can lead to engine component failure. Here, we demonstrate its performance on vibration data from an experimental gas turbine engine operating on different conditions. Engine vibration data that are designated as belonging to the engine’s “normal” condition correspond to fuels and air-to-fuel ratio combinations, in which the engine experienced low levels of vibration. Results demonstrate that such novelty detection schemes can achieve a satisfactory validation accuracy through appropriate selection of two parameters of the

  13. 2-d Simulations of Test Methods

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2004-01-01

    One of the main obstacles for the further development of self-compacting concrete is to relate the fresh concrete properties to the form filling ability. Therefore, simulation of the form filling ability will provide a powerful tool in obtaining this goal. In this paper, a continuum mechanical...... approach is presented by showing initial results from 2-d simulations of the empirical test methods slump flow and L-box. This method assumes a homogeneous material, which is expected to correspond to particle suspensions e.g. concrete, when it remains stable. The simulations have been carried out when...... using both a Newton and Bingham model for characterisation of the rheological properties of the concrete. From the results, it is expected that both the slump flow and L-box can be simulated quite accurately when the model is extended to 3-d and the concrete is characterised according to the Bingham...

  14. 2D vector-cyclic deformable templates

    DEFF Research Database (Denmark)

    Schultz, Nette; Conradsen, Knut

    1998-01-01

    In this paper the theory of deformable templates is a vector cycle in 2D is described. The deformable template model originated in (Grenander, 1983) and was further investigated in (Grenander et al., 1991). A template vector distribution is induced by parameter distribution from transformation...... matrices applied to the vector cycle. An approximation in the parameter distribution is introduced. The main advantage by using the deformable template model is the ability to simulate a wide range of objects trained by e.g. their biological variations, and thereby improve restoration, segmentation...... and probabillity measurement. The case study concerns estimation of meat percent in pork carcasses. Given two cross-sectional images - one at the front and one near the ham of the carcass - the areas of lean and fat and a muscle in the lean area are measured automatically by the deformable templates....

  15. 2D quantum gravity from quantum entanglement.

    Science.gov (United States)

    Gliozzi, F

    2011-01-21

    In quantum systems with many degrees of freedom the replica method is a useful tool to study the entanglement of arbitrary spatial regions. We apply it in a way that allows them to backreact. As a consequence, they become dynamical subsystems whose position, form, and extension are determined by their interaction with the whole system. We analyze, in particular, quantum spin chains described at criticality by a conformal field theory. Its coupling to the Gibbs' ensemble of all possible subsystems is relevant and drives the system into a new fixed point which is argued to be that of the 2D quantum gravity coupled to this system. Numerical experiments on the critical Ising model show that the new critical exponents agree with those predicted by the formula of Knizhnik, Polyakov, and Zamolodchikov.

  16. Locality constraints and 2D quasicrystals

    International Nuclear Information System (INIS)

    Socolar, J.E.S.

    1990-01-01

    The plausible assumption that long-range interactions between atoms are negligible in a quasicrystal leaks to the study of tilings that obey constraints on the local configurations of tiles. The theory of such constraints (called matching rules) for 2D quasicrystal tilings is reviewed here. Different types of matching rules are defined and examples of tilings obeying them are given where known. The role of tile decoration is discussed and is shown to be significant in at least two cases (octagonal and dodecagonal duals of periodic 4-grids and 6-grids). A new result is introduced: a constructive procedure is described for generating weak matching rules for tilings with N-fold symmetry, for any N that is either a prime number or twice a prime number. The physics associated with weak matching rules, results on local growth rules, and the case of icosahedral symmetry are all briefly discussed. (author). 29 refs, 4 figs

  17. Nonlinear Optics with 2D Layered Materials.

    Science.gov (United States)

    Autere, Anton; Jussila, Henri; Dai, Yunyun; Wang, Yadong; Lipsanen, Harri; Sun, Zhipei

    2018-03-25

    2D layered materials (2DLMs) are a subject of intense research for a wide variety of applications (e.g., electronics, photonics, and optoelectronics) due to their unique physical properties. Most recently, increasing research efforts on 2DLMs are projected toward the nonlinear optical properties of 2DLMs, which are not only fascinating from the fundamental science point of view but also intriguing for various potential applications. Here, the current state of the art in the field of nonlinear optics based on 2DLMs and their hybrid structures (e.g., mixed-dimensional heterostructures, plasmonic structures, and silicon/fiber integrated structures) is reviewed. Several potential perspectives and possible future research directions of these promising nanomaterials for nonlinear optics are also presented. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. 2D Electrostatic Actuation of Microshutter Arrays

    Science.gov (United States)

    Burns, Devin E.; Oh, Lance H.; Li, Mary J.; Jones, Justin S.; Kelly, Daniel P.; Zheng, Yun; Kutyrev, Alexander S.; Moseley, Samuel H.

    2015-01-01

    An electrostatically actuated microshutter array consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutter arrays demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.

  19. 2-D Model Test of Dolosse Breakwater

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Liu, Zhou

    1994-01-01

    ). To extend the design diagram to cover Dolos breakwaters with superstructure, 2-D model tests of Dolos breakwater with wave wall is included in the project Rubble Mound Breakwater Failure Modes sponsored by the Directorate General XII of the Commission of the European Communities under Contract MAS-CT92......The rational design diagram for Dolos armour should incorporate both the hydraulic stability and the structural integrity. The previous tests performed by Aalborg University (AU) made available such design diagram for the trunk of Dolos breakwater without superstructures (Burcharth et al. 1992...... was on the Dolos breakwater with a high superstructure, where there was almost no overtopping. This case is believed to be the most dangerous one. The test of the Dolos breakwater with a low superstructure was also performed. The objective of the last part of the experiment is to investigate the influence...

  20. Full revivals in 2D quantum walks

    International Nuclear Information System (INIS)

    Stefanak, M; Jex, I; Kollar, B; Kiss, T

    2010-01-01

    Recurrence of a random walk is described by the Polya number. For quantum walks, recurrence is understood as the return of the walker to the origin, rather than the full revival of its quantum state. Localization for two-dimensional quantum walks is known to exist in the sense of non-vanishing probability distribution in the asymptotic limit. We show, on the example of the 2D Grover walk, that one can exploit the effect of localization to construct stationary solutions. Moreover, we find full revivals of a quantum state with a period of two steps. We prove that there cannot be longer cycles for a four-state quantum walk. Stationary states and revivals result from interference, which has no counterpart in classical random walks.