WorldWideScience

Sample records for learn join mayo

  1. Study on Mobile Augmented Reality Adoption for Mayo Language Learning

    OpenAIRE

    Miranda Bojórquez, Erasmo; Vergara Villegas, Osslan Osiris; Cruz Sánchez, Vianey Guadalupe; García-Alcaraz, Jorge Luis; Favela Vara, Jesús

    2016-01-01

    This paper presents the results of a study applied to undergraduates in order to know how the cultural dimensions affect their perceptions of the acceptance and use of new technologies in a student-centered learning environment. A total of 85 undergraduate students from the Autonomous Indigenous University of Mexico (UAIM) participated in the study. Each student was asked to use a mobile augmented reality (MAR) application designed to learn Mayo language (language spoken in Northwestern Mexic...

  2. Potentials of Industrie 4.0 and Machine Learning for Mechanical Joining

    OpenAIRE

    Jäckel, Mathias

    2017-01-01

    -Sensitivity analysis of the influence of component properties and joining parameters on the joining result for self-pierce riveting -Possibilities to link mechanical joining technologies with the automotive process chain for quality and flexibility improvements -Potential of using machine learning to reduce automotive product development cycles in relation to mechanical joining -Datamining for machine learning at mechanical joining

  3. Study on Mobile Augmented Reality Adoption for Mayo Language Learning

    Directory of Open Access Journals (Sweden)

    Erasmo Miranda Bojórquez

    2016-01-01

    Full Text Available This paper presents the results of a study applied to undergraduates in order to know how the cultural dimensions affect their perceptions of the acceptance and use of new technologies in a student-centered learning environment. A total of 85 undergraduate students from the Autonomous Indigenous University of Mexico (UAIM participated in the study. Each student was asked to use a mobile augmented reality (MAR application designed to learn Mayo language (language spoken in Northwestern Mexico. Afterwards, the students responded to a survey with items concerning the use and technology acceptance and about cultural dimensions of individualism and uncertainty avoidance. Structural equation modeling (SEM was used to analyze the data collected from students. Results provide evidence that the individualism contributes positively to perceived ease of use of the MAR app, and uncertainty avoidance has no impact. The findings showed that the MAR system could be easily used if it includes a natural way to promote collaborative work. In addition, to gain the trust of students, the uncertainty avoidance needs to be reduced by enriching the help information offered for app use.

  4. Enhancing project-oriented learning by joining communities of practice and opening spaces for relatedness

    Science.gov (United States)

    Pascual, R.

    2010-03-01

    This article describes an extension to project-oriented learning to increase social construction of knowledge and learning. The focus is on: (a) maximising opportunities for students to share their knowledge with practitioners by joining communities of practice, and (b) increasing their intrinsic motivation by creating conditions for student's relatedness. The case study considers a last year capstone course in Mechanical Engineering. The work addresses innovative practices of active learning and beyond project-oriented learning through: (a) the development of a web-based decision support system, (b) meetings between the communities of students, maintenance engineers and academics, and (c) new off-campus group instances. The author hypothesises that this multi-modal approach increases deep learning and social impact of the educational process. Surveys to the actors support a successful achievement of the educational goals. The methodology can easily be extended to further improve the learning process.

  5. International market research at the Mayo Clinic.

    Science.gov (United States)

    Hathaway, M; Seltman, K

    2001-01-01

    Mayo Clinic has a long international history and has been providing care to international patients since its inception. Despite its history and reputation, however, the marketing staff continues to monitor the international market to gauge the level of awareness, reputation, and attractiveness of Mayo Clinic around the world. Here's a look at how one institution has used word-of-mouth marketing to maintain its global reputation.

  6. Mayo Clinic Care Network: A Collaborative Health Care Model.

    Science.gov (United States)

    Wald, John T; Lowery-Schrandt, Sherri; Hayes, David L; Kotsenas, Amy L

    2018-01-01

    By leveraging its experience and expertise as a consultative clinical partner, the Mayo Clinic developed an innovative, scalable care model to accomplish several strategic goals: (1) create and sustain high-value relationships that benefit patients and providers, (2) foster relationships with like-minded partners to act as a strategy against the development of narrow health care networks, and (3) increase national and international brand awareness of Mayo Clinic. The result was the Mayo Clinic Care Network. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  7. Performance characteristics of the Mayo/IBM PACS

    Science.gov (United States)

    Persons, Kenneth R.; Gehring, Dale G.; Pavicic, Mark J.; Ding, Yingjai

    1991-07-01

    The Mayo Clinic and IBM (at Rochester, Minnesota) have jointly developed a picture archiving system for use with Mayo's MRI and Neuro CT imaging modalities. The communications backbone of the PACS is a portion of the Mayo institutional network: a series of 4-Mbps token rings interconnected by bridges and fiber optic extensions. The performance characteristics of this system are important to understand because they affect the response time a PACS user can expect, and the response time for non-PACS users competing for resources on the institutional network. The performance characteristics of each component and the average load levels of the network were measured for various load distributions. These data were used to quantify the response characteristics of the existing system and to tune a model developed by North Dakota State University Department of Computer Science for predicting response times of more complex topologies.

  8. Elton Mayo and Carl Rogers: A Tale of Two Techniques.

    Science.gov (United States)

    Mahoney, Kevin T.; Baker, David B.

    2002-01-01

    Compares the simultaneous emergence of Mayo's nonauthoritarian interviewing approach and Rogers' nondirective counseling approach. Examines the influence of Piaget on Mayo and reviews the Hawthorne studies. Concludes that differences in the approaches outweigh similarities. (Contains 21 references.) (SK)

  9. Empowering Mayo Clinic Individualized Medicine with Genomic Data Warehousing

    Directory of Open Access Journals (Sweden)

    Iain Horton

    2017-08-01

    Full Text Available Individualized medicine enables better diagnoses and treatment decisions for patients and promotes research in understanding the molecular underpinnings of disease. Linking individual patient’s genomic and molecular information with their clinical phenotypes is crucial to these efforts. To address this need, the Center for Individualized Medicine at Mayo Clinic has implemented a genomic data warehouse and a workflow management system to bring data from institutional electronic health records and genomic sequencing data from both clinical and research bioinformatics sources into the warehouse. The system is the foundation for Mayo Clinic to build a suite of tools and interfaces to support various clinical and research use cases. The genomic data warehouse is positioned to play a key role in enhancing the research capabilities and advancing individualized patient care at Mayo Clinic.

  10. Empowering Mayo Clinic Individualized Medicine with Genomic Data Warehousing.

    Science.gov (United States)

    Horton, Iain; Lin, Yaxiong; Reed, Gay; Wiepert, Mathieu; Hart, Steven

    2017-08-22

    Individualized medicine enables better diagnoses and treatment decisions for patients and promotes research in understanding the molecular underpinnings of disease. Linking individual patient's genomic and molecular information with their clinical phenotypes is crucial to these efforts. To address this need, the Center for Individualized Medicine at Mayo Clinic has implemented a genomic data warehouse and a workflow management system to bring data from institutional electronic health records and genomic sequencing data from both clinical and research bioinformatics sources into the warehouse. The system is the foundation for Mayo Clinic to build a suite of tools and interfaces to support various clinical and research use cases. The genomic data warehouse is positioned to play a key role in enhancing the research capabilities and advancing individualized patient care at Mayo Clinic.

  11. Against the Corporate Culture Ideology: An Interview with Peter Mayo

    Science.gov (United States)

    Suoranta, Juha

    2010-01-01

    This article presents an interview with Peter Mayo, author and expert in the field of sociology of adult education, on his major influences in this area, his books, and his views on the role of radical adult education and radical scholarship in the future. In the interview, Peter Mayo states that his initial view of adult education was quite a…

  12. Precision Joining Center

    Science.gov (United States)

    Powell, J. W.; Westphal, D. A.

    1991-08-01

    A workshop to obtain input from industry on the establishment of the Precision Joining Center (PJC) was held on July 10-12, 1991. The PJC is a center for training Joining Technologists in advanced joining techniques and concepts in order to promote the competitiveness of U.S. industry. The center will be established as part of the DOE Defense Programs Technology Commercialization Initiative, and operated by EG&G Rocky Flats in cooperation with the American Welding Society and the Colorado School of Mines Center for Welding and Joining Research. The overall objectives of the workshop were to validate the need for a Joining Technologists to fill the gap between the welding operator and the welding engineer, and to assure that the PJC will train individuals to satisfy that need. The consensus of the workshop participants was that the Joining Technologist is a necessary position in industry, and is currently used, with some variation, by many companies. It was agreed that the PJC core curriculum, as presented, would produce a Joining Technologist of value to industries that use precision joining techniques. The advantage of the PJC would be to train the Joining Technologist much more quickly and more completely. The proposed emphasis of the PJC curriculum on equipment intensive and hands-on training was judged to be essential.

  13. Learning by joining the rhythm

    DEFF Research Database (Denmark)

    Lund, Ole; Ravn, Susanne; Christensen, Mette Krogh

    2012-01-01

    This article aims to explore how a joint rhythm is learned. The exploration is based on a combination of a case study of training in elite rowing and theoretical considerations concerning mutual incorporation of skills in learning. In 2009 Juliane and Anne start to row the double sculler together....... The two rowers’ aim is to be among the exclusive group of teams that qualify for the Olympic Games three years later. However Anne is not a rower, and has to be apprenticed by Juliane, who is an experienced elite rower. One important learning goal in the apprenticeship is to find a good joint rhythm......, to be able to put optimal effort into the rowing. Thus the apprenticeship is about developing a sense for a good rhythm in Anne which corresponds to Juliane’s fine-grained sense of what a good rhythm should feel like. Our study suggests that apprenticeship learning has to be understood as an embodied...

  14. Harmonizing and consolidating the measurement of patient-reported information at health care institutions: a position statement of the Mayo Clinic

    Directory of Open Access Journals (Sweden)

    Eton DT

    2014-02-01

    Full Text Available David T Eton,1,2 Timothy J Beebe,1,2 Philip T Hagen,3 Michele Y Halyard,4 Victor M Montori,1,5 James M Naessens,1,2 Jeff A Sloan,6 Carrie A Thompson,7 Douglas L Wood1,81Division of Heath Care Policy and Research, Department of Health Sciences Research, 2Mayo Clinic Robert D. and Patricia E. Kern Center for the Science of Health Care Delivery, 3Department of Preventive, Occupational, and Aerospace Medicine, Mayo Clinic, Rochester, MN, 4Department of Radiation Oncology, Mayo Clinic, Scottsdale, AZ, 5Knowledge and Evaluation Research Unit, 6Division of Biomedical Statistics and Informatics, Department of Health Sciences Research, 7Division of Hematology, Department of Medicine, 8Center for Innovation, Mayo Clinic, Rochester, MN, USAAbstract: Patient-reported outcomes (PROs capture how patients perceive their health and their health care; their use in clinical research is longstanding. Today, however, PROs increasingly are being used to inform the care of individual patients, and document the performance of health care entities. We recently wrote and internally distributed an institutional position statement titled "Harmonizing and Consolidating the Measurement of Patient-Reported Outcomes at Mayo Clinic: A Position Statement for the Center for the Science of Health Care Delivery". The statement is meant to educate clinicians, clinical teams, and institutional administrators about the merits of using PROs in a systematic manner for clinical care and quality measurement throughout the institution. The present article summarizes the most important messages from the statement, describing PROs and their use, identifying practical considerations for implementing them in routine practice, elucidating potential barriers to their use, and formulating strategies to overcome these barriers. The lessons learned from our experience – including pitfalls, challenges, and successes – may inform other health care institutions that are interested in

  15. Bringing human resources to the table: utilization of an HR balanced scorecard at Mayo Clinic.

    Science.gov (United States)

    Fottler, Myron D; Erickson, Eric; Rivers, Patrick A

    2006-01-01

    Rather than viewing HR as a critical driver of organizational strategy and outcomes, most health care organizations see HR as a drain on the organization's bottom line. Only by aligning HR with the organizational strategy will HR leaders truly get a seat at the leadership table. HR professionals can overcome impediments and gain a seat at the table by learning the language of business and the ways in which organizational leaders use data to drive their decisions. This article shows how Mayo Clinic uses the popular Balanced Scorecard approach to align its measures of HR performance to the organization's strategic plan.

  16. Fast and scalable inequality joins

    KAUST Repository

    Khayyat, Zuhair

    2016-09-07

    Inequality joins, which is to join relations with inequality conditions, are used in various applications. Optimizing joins has been the subject of intensive research ranging from efficient join algorithms such as sort-merge join, to the use of efficient indices such as (Formula presented.)-tree, (Formula presented.)-tree and Bitmap. However, inequality joins have received little attention and queries containing such joins are notably very slow. In this paper, we introduce fast inequality join algorithms based on sorted arrays and space-efficient bit-arrays. We further introduce a simple method to estimate the selectivity of inequality joins which is then used to optimize multiple predicate queries and multi-way joins. Moreover, we study an incremental inequality join algorithm to handle scenarios where data keeps changing. We have implemented a centralized version of these algorithms on top of PostgreSQL, a distributed version on top of Spark SQL, and an existing data cleaning system, Nadeef. By comparing our algorithms against well-known optimization techniques for inequality joins, we show our solution is more scalable and several orders of magnitude faster. © 2016 Springer-Verlag Berlin Heidelberg

  17. The Mayo Clinic Value Creation System.

    Science.gov (United States)

    Swensen, Stephen J; Dilling, James A; Harper, C Michel; Noseworthy, John H

    2012-01-01

    The authors present Mayo Clinic's Value Creation System, a coherent systems engineering approach to delivering a single high-value practice. There are 4 tightly linked, interdependent phases of the system: alignment, discovery, managed diffusion, and measurement. The methodology is described and examples of the results to date are presented. The Value Creation System has been demonstrated to improve the quality of patient care while reducing costs and increasing productivity.

  18. Mida mõtleb professor Andrew Mayo? / Anne-Mari Ernesaks

    Index Scriptorium Estoniae

    Ernesaks, Anne-Mari

    2005-01-01

    PARE koordinaator tutvustab tuntud inimkapitali ideoloogi Andrew Mayo raamatut "Ettevõtte inimväärtus". Raamatu autori hinnangul on tänapäeva organisatsioonides juhtimise olulisim ülesanne inimese juhtimine varana. Lisa: Konverents

  19. Joining of advanced materials

    CERN Document Server

    Messler, Robert W

    1993-01-01

    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, a

  20. Joining by plastic deformation

    DEFF Research Database (Denmark)

    Mori, Ken-ichiro; Bay, Niels; Fratini, Livan

    2013-01-01

    As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating opportuni......As the scale and complexity of products such as aircraft and cars increase, demand for new functional processes to join mechanical parts grows. The use of plastic deformation for joining parts potentially offers improved accuracy, reliability and environmental safety as well as creating...

  1. Ceramic joining

    Energy Technology Data Exchange (ETDEWEB)

    Loehman, R.E. [Sandia National Lab., Albuquerque, NM (United States)

    1996-04-01

    This paper describes the relation between reactions at ceramic-metal interfaces and the development of strong interfacial bonds in ceramic joining. Studies on a number of systems are described, including silicon nitrides, aluminium nitrides, mullite, and aluminium oxides. Joints can be weakened by stresses such as thermal expansion mismatch. Ceramic joining is used in a variety of applications such as solid oxide fuel cells.

  2. Learning Disorders: Know the Signs, How to Help

    Science.gov (United States)

    Healthy Lifestyle Children's health Learning disorders can make it hard for a child to read, write or do simple math. Understand the signs and what ... By Mayo Clinic Staff Many children who have learning disorders, also known as learning disabilities, struggle for ...

  3. Chrysler Upset Protrusion Joining Techniques for Joining Dissimilar Metals

    Energy Technology Data Exchange (ETDEWEB)

    Logan, Stephen [FCA US LLC, Auburn Hills, MI (United States)

    2017-09-28

    The project goal was to develop and demonstrate a robust, cost effective, and versatile joining technique, known as Upset Protrusion Joining (UPJ), for joining challenging dissimilar metal com-binations, especially those where one of the metals is a die cast magnesium (Mg) component. Since two of the key obstacles preventing more widespread use of light metals (especially in high volume automotive applications) are 1) a lack of robust joining techniques and 2) susceptibility to galvanic corrosion, and since the majority of the joint combinations evaluated in this project include die cast Mg (the lightest structural metal) as one of the two materials being joined, and since die casting is the most common and cost effective process for producing Mg components, then successful project completion provides a key enabler to high volume application of lightweight materials, thus potentially leading to reduced costs, and encouraging implementation of lightweight multi-material vehicles for significant reductions in energy consumption and reduced greenhouse gas emissions. Eco-nomic benefits to end-use consumers are achieved primarily via the reduction in fuel consumption. Unlike currently available commercial processes, the UPJ process relies on a very robust mechanical joint rather than intermetallic bonding, so the more cathodic material can be coated prior to joining, thus creating a robust isolation against galvanic attack on the more anodic material. Additionally, since the UPJ protrusion is going through a hole that can be pre-drilled or pre-punched prior to coating, the UPJ process is less likely to damage the coating when the joint is being made. Further-more, since there is no additional cathodic material (such as a steel fastener) used to create the joint, there is no joining induced galvanic activity beyond that of the two parent materials. In accordance with its originally proposed plan, this project has successfully developed process variants of UPJ to enable

  4. Join Operations in Temporal Databases

    DEFF Research Database (Denmark)

    Gao, D.; Jensen, Christian Søndergaard; Snodgrass, R.T.

    2005-01-01

    Joins are arguably the most important relational operators. Poor implementations are tantamount to computing the Cartesian product of the input relations. In a temporal database, the problem is more acute for two reasons. First, conventional techniques are designed for the evaluation of joins...... with equality predicates rather than the inequality predicates prevalent in valid-time queries. Second, the presence of temporally varying data dramatically increases the size of a database. These factors indicate that specialized techniques are needed to efficiently evaluate temporal joins. We address...... this need for efficient join evaluation in temporal databases. Our purpose is twofold. We first survey all previously proposed temporal join operators. While many temporal join operators have been defined in previous work, this work has been done largely in isolation from competing proposals, with little...

  5. Joined up Clinical Governance: Learning from Our Mistakes

    Directory of Open Access Journals (Sweden)

    Pam Mosedale

    2017-02-01

    Full Text Available This session will be a practical demonstration, with group discussion of how a significant event can lead to the practice examining what happened, looking at the evidence base, revising protocols & auditing implementation of the new protocols.A significant event is an event thought by anyone in the team to be significant in the care of patients or the conduct of the practice.Significant Event Audit is a qualitative rather than quantitative form of Audit but still needs a structured framework to be successful.SEA involves gathering information in the form of a timeline of the event, clinical records & accounts of individuals involved.Scenarios around significant events will be discussed and analysed by the group as if they were conducting a non-threatening, open, fair & honest SEA meeting.During the meeting the incident will be analysed to see what happened, why it happened, any underlying reasons, what has been learned & what needs to change. This meeting is not to apportion blame.When looking at what needs to change the group should consider whether it is necessary to go away & look at the evidence base & then make changes to practice protocols. Any need for training or CPD for individuals or the whole team should be identified.A timescale for changes should be agreed.An audit can then be carried out to monitor the improvements and assess the impact of these changes. The group will consider what audits are appropriate, whether process or outcome audits are useful in the circumstances. They will also discuss how these audits can be carried out.SEA is a very useful tool in veterinary practice & a very good way to get all team members engaged with clinical governance & evidence based veterinary medicine in a joined up way which demonstrates the potential improvements to practice systems of work and patient care and safety.This session would be designed to appeal to all team members whether vets, nurses, receptionists or practice managers.

  6. The Enterprise Data Trust at Mayo Clinic: a semantically integrated warehouse of biomedical data.

    Science.gov (United States)

    Chute, Christopher G; Beck, Scott A; Fisk, Thomas B; Mohr, David N

    2010-01-01

    Mayo Clinic's Enterprise Data Trust is a collection of data from patient care, education, research, and administrative transactional systems, organized to support information retrieval, business intelligence, and high-level decision making. Structurally it is a top-down, subject-oriented, integrated, time-variant, and non-volatile collection of data in support of Mayo Clinic's analytic and decision-making processes. It is an interconnected piece of Mayo Clinic's Enterprise Information Management initiative, which also includes Data Governance, Enterprise Data Modeling, the Enterprise Vocabulary System, and Metadata Management. These resources enable unprecedented organization of enterprise information about patient, genomic, and research data. While facile access for cohort definition or aggregate retrieval is supported, a high level of security, retrieval audit, and user authentication ensures privacy, confidentiality, and respect for the trust imparted by our patients for the respectful use of information about their conditions.

  7. The Pine Ridge-Mayo National Aeronautics and Space Administration Telemedicine Project: Program Activities and Participant Reactions

    Science.gov (United States)

    Kottke, T. E.; Little Finger, L.; Trapp, M. A.; Panser, L. A.; Novotny, P. J.

    1996-01-01

    OBJECTIVE: To determine the response of participants to the Pine Ridge-Mayo National Aeronautics and Space Administration telemedicine project. DESIGN: We describe a 3-month demonstration project of medical education and clinical consultations conducted by means of satellite transmission. Postparticipation questionnaires and a postproject survey were used to assess the success of the activity. MATERIAL AND METHODS: Patients and employees at the Pine Ridge Indian Health Service Hospital in southwestern South Dakota and employees at Mayo Clinic Rochester participated in a telemedicine project, after which they completed exit surveys and a postproject questionnaire to ascertain the acceptability of this mode of health care. RESULTS: Almost all Pine Ridge and Mayo Clinic participants viewed the project as beneficial. The educational sessions received favorable evaluations, and almost two-thirds of the patients who completed evaluations thought the consultation had contributed to their medical care. More than 90% of the respondents from Pine Ridge and more than 85% of the respondents from Mayo Clinic Rochester said that they would recommend participation in this project to others. More than 90% of respondents from Pine Ridge and 80% of Mayo respondents agreed with the statement that the project should continue. CONCLUSION: These data suggest that a program of clinical consultation services, professional education, and patient education available by telemedicine might be viewed as beneficial.

  8. 78 FR 14528 - Mayo Hydropower, LLC, Avalon Hydropower, LLC; Notice of Application for Transfer of License, and...

    Science.gov (United States)

    2013-03-06

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 11169-029] Mayo Hydropower, LLC, Avalon Hydropower, LLC; Notice of Application for Transfer of License, and Soliciting Comments and Motions To Intervene On November 20, 2012, Mayo Hydropower, LLC (transferor) and Avalon Hydropower...

  9. Comparison of the EZ-Cap recapper with the Mayo recapper for the prevention of needlesticks.

    Science.gov (United States)

    Dewhirst, Chad A; Hung, Joseph C

    2008-09-01

    The purpose of this project was the development of a device that improves the design of our current capping block, the Mayo recapper. The major challenges for design and improvement included creating a device that is simple to use and can be applied throughout our department. We wanted a recapper device that increased safety and minimized the potential for needlesticks. Simplicity was another important factor, along with versatility and low cost. A new recapper, called EZ-Cap, was developed, and a comparison study was conducted to evaluate the pros and cons of the EZ-Cap recapper and the Mayo recapper. Nuclear medicine technologists (n = 10) in our department used each device when administering patient injections. At the conclusion of their patient injection rotation, they recorded on a survey sheet the pros and cons of each device. The results of this survey were used to evaluate the effectiveness, comfort level during use, and safety of each recapping device. We used a 2-level scoring system to help determine which device was more favorable. The first level focused on comfort and convenience and was given a score of +1 or -1. The second level focused on safety and was given a score of +2 or -2. Because we believed that safety was a high priority for our capping blocks, this level received a higher score than the first level. The Mayo recapper was the device preferred by 9 of 10 technologists surveyed. The EZ-Cap recapper had several technical issues that made it difficult to use and that could potentially lead to safety concerns. According to our scoring system, the Mayo recapper received a score of +9 for its pros and -4 for its cons. By comparison, the EZ-Cap recapper received a score of +7 for its pros and -16 for its cons. Our results show that the Mayo recapper was the device of choice because its pros outweighed its cons. However, we will continually improve the effectiveness of the Mayo recapper to prevent needlesticks.

  10. Blind-date Conversation Joining

    Directory of Open Access Journals (Sweden)

    Luca Cesari

    2013-07-01

    Full Text Available We focus on a form of joining conversations among multiple parties in service-oriented applications where a client may asynchronously join an existing conversation without need to know in advance any information about it. More specifically, we show how the correlation mechanism provided by orchestration languages enables a form of conversation joining that is completely transparent to clients and that we call 'blind-date joining'. We provide an implementation of this strategy by using the standard orchestration language WS-BPEL. We then present its formal semantics by resorting to COWS, a process calculus specifically designed for modelling service-oriented applications. We illustrate our approach by means of a simple, but realistic, case study from the online games domain.

  11. Hospital de La Misericordia, 6 de mayo de 1906 - 6 de mayo de 1981

    Directory of Open Access Journals (Sweden)

    Liborio Sánchez Avella

    1981-07-01

    Full Text Available El 6 de mayo de 1981 cumplió el Hospital de La Misericordia 75 años de haber iniciado sus labores. La idea de crear el Hospital se venía gestando desde comienzos de 1890. Obtuvo la Personería Jurídica el 23 de julio de 1897y el 25 de julio del mismo año colocó la primera piedra el Presidente de la República Miguel Antonio Caro. José Ignacio Barberi, su fundador, dejó un escrito en el cual relataba la historia de este Hospital. El mejor homenaje que se le puede hacer al Hospital y a José Ignacio Barberi, es transcribir las palabras que él dejó inéditas en 1940.

  12. Prácticas de crianza y educación inicial en la etnia Mayo

    Directory of Open Access Journals (Sweden)

    Ángel Vera Noriega

    2010-01-01

    Full Text Available En el artículo se describen las características de las prácticas de crianza en una comunidad mayo y se realiza un análisis documental del Modelo de Educación Inicial no Escolarizada del CONAFE. Ello con la finalidad de contrastar los resultados de la práctica de crianza con las competencias esperadas de los padres y niños que asisten al programa y con base en ello, identificar la eficacia de la implementación del programa para la reproducción social en la etnia mayo. Participaron cincuenta madres y niños de la comunidad indígena mayo "El Júpare" ubicada en el municipio de Huatabampo, al sur de Sonora. Los instrumentos utilizados fueron Índice de Estrés Parental (Abidin, 1990, Interacción Padre-Hijo-Madre (Peña, 2004, Estimulación del Niño en el Hogar (Caldwell y Bradley, 1967 y Escala del Desarrollo Integral del niño (Atkin, 1987. En la evaluación del desarrollo, 54% de los niños presentan un desarrollo normal, 26% rrollo en riesgo y en 20% se detectan problemas. El programa de Educación Inicial no Escolarizado requiere de modificaciones sustantivas para responder a las prácticas de crianza que se desarrollan en la etnia mayo.

  13. Lightning Fast and Space Efficient Inequality Joins

    KAUST Repository

    Khayyat, Zuhair

    2015-09-01

    Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree,R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space effcient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

  14. Lightning fast and space efficient inequality joins

    KAUST Repository

    Khayyat, Zuhair

    2015-09-01

    Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree, R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space efficient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

  15. Lightning fast and space efficient inequality joins

    KAUST Repository

    Khayyat, Zuhair; Lucia, William; Singh, Meghna; Ouzzani, Mourad; Papotti, Paolo; Quiané -Ruiz, Jorge-Arnulfo; Tang, Nan; Kalnis, Panos

    2015-01-01

    Inequality joins, which join relational tables on inequality conditions, are used in various applications. While there have been a wide range of optimization methods for joins in database systems, from algorithms such as sort-merge join and band join, to various indices such as B+-tree, R*-tree and Bitmap, inequality joins have received little attention and queries containing such joins are usually very slow. In this paper, we introduce fast inequality join algorithms. We put columns to be joined in sorted arrays and we use permutation arrays to encode positions of tuples in one sorted array w.r.t. the other sorted array. In contrast to sort-merge join, we use space efficient bit-arrays that enable optimizations, such as Bloom filter indices, for fast computation of the join results. We have implemented a centralized version of these algorithms on top of PostgreSQL, and a distributed version on top of Spark SQL. We have compared against well known optimization techniques for inequality joins and show that our solution is more scalable and several orders of magnitude faster.

  16. Support groups for HIV-positive people in South Africa: Who joins ...

    African Journals Online (AJOL)

    Non-members had tested due to illness, reported considerably more pain and were more likely to have no income. PLWHA experienced high mental, physical and social distress which must be addressed. Attention to gender differences is called for. While all members joined the support group to gain information and learn ...

  17. Joining uranium to steel

    International Nuclear Information System (INIS)

    Perkins, M.A.

    1976-05-01

    A method has been devised which will allow the joining of uranium to steel by fusion welding through the use of an intermediate material. Uranium-0.5 titanium was joined to AISI 304L stainless steel by using a vanadium insert. Also, a method is now available for selecting possible filler metals when two entirely dissimilar metals need to be joined. This method allows a quantitative ranking to be made of the possible filler metals and thus the most likely candidate can be selected

  18. Authenticated join processing in outsourced databases

    KAUST Repository

    Yang, Yin

    2009-01-01

    Database outsourcing requires that a query server constructs a proof of result correctness, which can be verified by the client using the data owner\\'s signature. Previous authentication techniques deal with range queries on a single relation using an authenticated data structure (ADS). On the other hand, authenticated join processing is inherently more complex than ranges since only the base relations (but not their combination) are signed by the owner. In this paper, we present three novel join algorithms depending on the ADS availability: (i) Authenticated Indexed Sort Merge Join (AISM), which utilizes a single ADS on the join attribute, (ii) Authenticated Index Merge Join (AIM) that requires an ADS (on the join attribute) for both relations, and (iii) Authenticated Sort Merge Join (ASM), which does not rely on any ADS. We experimentally demonstrate that the proposed methods outperform two benchmark algorithms, often by several orders of magnitude, on all performance metrics, and effectively shift the workload to the outsourcing service. Finally, we extend our techniques to complex queries that combine multi-way joins with selections and projections. ©2009 ACM.

  19. Authenticated join processing in outsourced databases

    KAUST Repository

    Yang, Yin; Papadias, Dimitris; Papadopoulos, Stavros; Kalnis, Panos

    2009-01-01

    Database outsourcing requires that a query server constructs a proof of result correctness, which can be verified by the client using the data owner's signature. Previous authentication techniques deal with range queries on a single relation using an authenticated data structure (ADS). On the other hand, authenticated join processing is inherently more complex than ranges since only the base relations (but not their combination) are signed by the owner. In this paper, we present three novel join algorithms depending on the ADS availability: (i) Authenticated Indexed Sort Merge Join (AISM), which utilizes a single ADS on the join attribute, (ii) Authenticated Index Merge Join (AIM) that requires an ADS (on the join attribute) for both relations, and (iii) Authenticated Sort Merge Join (ASM), which does not rely on any ADS. We experimentally demonstrate that the proposed methods outperform two benchmark algorithms, often by several orders of magnitude, on all performance metrics, and effectively shift the workload to the outsourcing service. Finally, we extend our techniques to complex queries that combine multi-way joins with selections and projections. ©2009 ACM.

  20. The Effectiveness of Cooperative Learning Model of Pair Checks Type on Motivation and Mathematics Learning Outcomes of 8th Grade Junior High School Students

    Directory of Open Access Journals (Sweden)

    Wahyu Budi Wicaksono

    2017-08-01

    Full Text Available The purpose of this research was to know the effectiveness of Pair Checks cooperative model towards students’ learning result and learning motivation of eight grade. Population of this research were students of eight grade Junior High School 2 Pati in the academic year 2016/1017. The research used cluster random sampling technique.Where the selected samples were students of class VIII H as experimental class and class VIII G as control class. The data collected by the method of documentation, test methods, and scale methods. The analyzed of data used completeness test and average different test. The results showed that: (1 students’ learning result who join Pair Checks cooperative model have classical study completeness; (2 students’ mathematics learning result who join Pair Checks cooperative model is better than students mathematics learning result who join ekspository learning; (3 students’ learning motivation who join Pair Checks cooperative model is better than students’ learning motivation who join ekspository learning.

  1. Parallel trajectory similarity joins in spatial networks

    KAUST Repository

    Shang, Shuo

    2018-04-04

    The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider two cases of trajectory similarity joins (TS-Joins), including a threshold-based join (Tb-TS-Join) and a top-k TS-Join (k-TS-Join), where the objects are trajectories of vehicles moving in road networks. Given two sets of trajectories and a threshold θ, the Tb-TS-Join returns all pairs of trajectories from the two sets with similarity above θ. In contrast, the k-TS-Join does not take a threshold as a parameter, and it returns the top-k most similar trajectory pairs from the two sets. The TS-Joins target diverse applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide purposeful definitions of similarity. To enable efficient processing of the TS-Joins on large sets of trajectories, we develop search space pruning techniques and enable use of the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer search framework that lays the foundation for the algorithms for the Tb-TS-Join and the k-TS-Join that rely on different pruning techniques to achieve efficiency. For each trajectory, the algorithms first find similar trajectories. Then they merge the results to obtain the final result. The algorithms for the two joins exploit different upper and lower bounds on the spatiotemporal trajectory similarity and different heuristic scheduling strategies for search space pruning. Their per-trajectory searches are independent of each other and can be performed in parallel, and the mergings have constant cost. An empirical study with real data offers insight in the performance of the algorithms and demonstrates that they are capable of outperforming well-designed baseline algorithms by an order of magnitude.

  2. Parallel trajectory similarity joins in spatial networks

    KAUST Repository

    Shang, Shuo; Chen, Lisi; Wei, Zhewei; Jensen, Christian S.; Zheng, Kai; Kalnis, Panos

    2018-01-01

    The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider two cases of trajectory similarity joins (TS-Joins), including a threshold-based join (Tb-TS-Join) and a top-k TS-Join (k-TS-Join), where the objects are trajectories of vehicles moving in road networks. Given two sets of trajectories and a threshold θ, the Tb-TS-Join returns all pairs of trajectories from the two sets with similarity above θ. In contrast, the k-TS-Join does not take a threshold as a parameter, and it returns the top-k most similar trajectory pairs from the two sets. The TS-Joins target diverse applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide purposeful definitions of similarity. To enable efficient processing of the TS-Joins on large sets of trajectories, we develop search space pruning techniques and enable use of the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer search framework that lays the foundation for the algorithms for the Tb-TS-Join and the k-TS-Join that rely on different pruning techniques to achieve efficiency. For each trajectory, the algorithms first find similar trajectories. Then they merge the results to obtain the final result. The algorithms for the two joins exploit different upper and lower bounds on the spatiotemporal trajectory similarity and different heuristic scheduling strategies for search space pruning. Their per-trajectory searches are independent of each other and can be performed in parallel, and the mergings have constant cost. An empirical study with real data offers insight in the performance of the algorithms and demonstrates that they are capable of outperforming well-designed baseline algorithms by an order of magnitude.

  3. On the Expressiveness of Joining

    Directory of Open Access Journals (Sweden)

    Thomas Given-Wilson

    2015-08-01

    Full Text Available The expressiveness of communication primitives has been explored in a common framework based on the pi-calculus by considering four features: synchronism (asynchronous vs synchronous, arity (monadic vs polyadic data, communication medium (shared dataspaces vs channel-based, and pattern-matching (binding to a name vs testing name equality vs intensionality. Here another dimension coordination is considered that accounts for the number of processes required for an interaction to occur. Coordination generalises binary languages such as pi-calculus to joining languages that combine inputs such as the Join Calculus and general rendezvous calculus. By means of possibility/impossibility of encodings, this paper shows coordination is unrelated to the other features. That is, joining languages are more expressive than binary languages, and no combination of the other features can encode a joining language into a binary language. Further, joining is not able to encode any of the other features unless they could be encoded otherwise.

  4. Common Influence Join

    DEFF Research Database (Denmark)

    Yiu, Man Lung; Mamoulis, Nikos; Karras, Panagiotis

    2008-01-01

    We identify and formalize a novel join operator for two spatial pointsets P and Q. The common influence join (CIJ) returns the pairs of points (p,q),p isin P,q isin Q, such that there exists a location in space, being closer to p than to any other point in P and at the same time closer to q than ......-demand, is very efficient in practice, incurring only slightly higher I/O cost than the theoretical lower bound cost for the problem....

  5. Joining Movement Sequences: Modified Dynamic Movement Primitives for Robotics Applications Exemplified on Handwriting

    DEFF Research Database (Denmark)

    Kulvicius, Tomas; Ning, K.; Tamosiunaite, M.

    2012-01-01

    to simulated handwriting generation, which are also shown on a robot, where an adaptive algorithm is used to learn trajectories from human demonstration. These results demonstrate that the new method is a feasible alternative for joining of movement sequences, which has a high potential for all robotics...

  6. Speeding Up Neighbour-Joining Tree Construction

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Fagerberg, Rolf; Mailund, Thomas

    A widely used method for constructing phylogenetic trees is the neighbour-joining method of Saitou and Nei. We develope heuristics for speeding up the neighbour-joining method which generate the same phylogenetic trees as the original method. All heuristics are based on using a quad-tree to guide...... the search for the next pair of nodes to join, but di#er in the information stored in quad-tree nodes, the way the search is performed, and in the way the quad-tree is updated after a join. We empirically evaluate the performance of the heuristics on distance matrices obtained from the Pfam collection...... of alignments, and compare the running time with that of the QuickTree tool, a well-known and widely used implementation of the standard neighbour-joining method. The results show that the presented heuristics can give a significant speed-up over the standard neighbour-joining method, already for medium sized...

  7. Efficient Joins with Compressed Bitmap Indexes

    Energy Technology Data Exchange (ETDEWEB)

    Computational Research Division; Madduri, Kamesh; Wu, Kesheng

    2009-08-19

    We present a new class of adaptive algorithms that use compressed bitmap indexes to speed up evaluation of the range join query in relational databases. We determine the best strategy to process a join query based on a fast sub-linear time computation of the join selectivity (the ratio of the number of tuples in the result to the total number of possible tuples). In addition, we use compressed bitmaps to represent the join output compactly: the space requirement for storing the tuples representing the join of two relations is asymptotically bounded by min(h; n . cb), where h is the number of tuple pairs in the result relation, n is the number of tuples in the smaller of the two relations, and cb is the cardinality of the larger column being joined. We present a theoretical analysis of our algorithms, as well as experimental results on large-scale synthetic and real data sets. Our implementations are efficient, and consistently outperform well-known approaches for a range of join selectivity factors. For instance, our count-only algorithm is up to three orders of magnitude faster than the sort-merge approach, and our best bitmap index-based algorithm is 1.2x-80x faster than the sort-merge algorithm, for various query instances. We achieve these speedups by exploiting several inherent performance advantages of compressed bitmap indexes for join processing: an implicit partitioning of the attributes, space-efficiency, and tolerance of high-cardinality relations.

  8. Welding and Joining of Titanium Aluminides

    Science.gov (United States)

    Cao, Jian; Qi, Junlei; Song, Xiaoguo; Feng, Jicai

    2014-01-01

    Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion welding, friction welding and reactive joining. Of the numerous methods, solid-state diffusion bonding and vacuum brazing have been most heavily investigated for producing reliable joints. The current state of understanding and development of every welding and joining method for titanium aluminides is addressed respectively. The focus is on the fundamental understanding of microstructure characteristics and processing–microstructure–property relationships in the welding and joining of titanium aluminides to themselves and to other materials. PMID:28788113

  9. A comprehensive information technology system to support physician learning at the point of care.

    Science.gov (United States)

    Cook, David A; Sorensen, Kristi J; Nishimura, Rick A; Ommen, Steve R; Lloyd, Farrell J

    2015-01-01

    MayoExpert is a multifaceted information system integrated with the electronic medical record (EMR) across Mayo Clinic's multisite health system. It was developed as a technology-based solution to manage information, standardize clinical practice, and promote and document learning in clinical contexts. Features include urgent test result notifications; models illustrating expert-approved care processes; concise, expert-approved answers to frequently asked questions (FAQs); a directory of topic-specific experts; and a portfolio for provider licensure and credentialing. The authors evaluate MayoExpert's reach, effectiveness, adoption, implementation, and maintenance. Evaluation data sources included usage statistics, user surveys, and pilot studies.As of October 2013, MayoExpert was available at 94 clinical sites in 12 states and contained 1,368 clinical topics, answers to 7,640 FAQs, and 92 care process models. In 2012, MayoExpert was accessed at least once by 2,578/3,643 (71%) staff physicians, 900/1,374 (66%) midlevel providers, and 1,728/2,291 (75%) residents and fellows. In a 2013 survey of MayoExpert users with 536 respondents, all features were highly rated (≥67% favorable). More providers reported using MayoExpert to answer questions before/after than during patient visits (68% versus 36%). During November 2012 to April 2013, MayoExpert sent 1,660 notifications of new-onset atrial fibrillation and 1,590 notifications of prolonged QT. MayoExpert has become part of routine clinical and educational operations, and its care process models now define Mayo Clinic best practices. MayoExpert's infrastructure and content will continue to expand with improved templates and content organization, new care process models, additional notifications, better EMR integration, and improved support for credentialing activities.

  10. Welding and Joining of Titanium Aluminides

    Directory of Open Access Journals (Sweden)

    Jian Cao

    2014-06-01

    Full Text Available Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion welding, friction welding and reactive joining. Of the numerous methods, solid-state diffusion bonding and vacuum brazing have been most heavily investigated for producing reliable joints. The current state of understanding and development of every welding and joining method for titanium aluminides is addressed respectively. The focus is on the fundamental understanding of microstructure characteristics and processing–microstructure–property relationships in the welding and joining of titanium aluminides to themselves and to other materials.

  11. Los acontecimientos de mayo del 68 y la lucha antipsiquiátrica

    Directory of Open Access Journals (Sweden)

    Valentín Galván García

    2009-12-01

    Full Text Available Los movimientos de detracción a la psiquiatría clásica no nacieron hasta la década de los años 60. Las reflexiones comunes de sociólogos, filósofos, políticos, psiquiatras y enfermos mentales coincidieron en un severo replanteamiento del saber psiquiátrico y de las prácticas propugnadas. El término propuesto en 1967 por David Cooper fue el estandarte de estos nuevos planteamientos. Con anterioridad al movimiento psiquiátrico, en 1961, se publicaron dos textos fundamentales: Internados de Erving Goffman y la Historia de la locura de Michel Foucault. Ambas obras, hasta entonces, conocidas exclusivamente en el ámbito académico, por lo que sus enfoques y problemáticas tuvieron escasa repercusión hasta los acontecimientos de Mayo del 68, los cuales propiciaron unas condiciones más favorables para su discurso.________________________ABSTRACT:The movements back to the classical psychiatry weren’t born until the 60 ths decade. The common thoughts of sociologists, philosophers, politicians, psychiatrists and mentally sick people joined together a strict reconsideration of the phychiatric knowledge and the proposed training. The word “antipsychiatry” proposed in 1967 by David Cooper was the flagship of these new thoughts. Before the psychiatric movement, in 1961, two main books were published: Asylums by Erving Goffman and History of mandess by Michel Foucault. Both books, until then, were known exclusively in the academic field, for its focus and problems had little repercussion until the May 68 events, which encouraged more favourable conditions for its speech.  

  12. Le nonne di Plaza de Mayo

    Directory of Open Access Journals (Sweden)

    Benedetta Calandra

    2006-11-01

    Full Text Available The article is focused on a specific case study of ‘motherist movement’ in Argentina during the last military rule (1976-1983: the Grandmothers of Plaza de Mayo. Blurring the boundaries between public and private realm, these old women, without a previous, soundly-based political conscience, were able to set up a transnational human rights movement, well known all over the world, while looking for their abducted grandchildren. A crucial issue, still, is: how far did this group go in terms of advocating womens’ rights? Could we really find a correspondence, as Jelin puts it, between ‘women for human rights’ and ‘women for women’s rights’? The answer, as the Argentinean case shows, seems to be not so straightforward.

  13. Ring-constrained Join

    DEFF Research Database (Denmark)

    Yiu, Man Lung; Karras, Panagiotis; Mamoulis, Nikos

    2008-01-01

    . This new operation has important applications in decision support, e.g., placing recycling stations at fair locations between restaurants and residential complexes. Clearly, RCJ is defined based on a geometric constraint but not on distances between points. Thus, our operation is fundamentally different......We introduce a novel spatial join operator, the ring-constrained join (RCJ). Given two sets P and Q of spatial points, the result of RCJ consists of pairs (p, q) (where p ε P, q ε Q) satisfying an intuitive geometric constraint: the smallest circle enclosing p and q contains no other points in P, Q...

  14. Antimycobacterial activity of medicinal plants used by the Mayo people of Sonora, Mexico.

    Science.gov (United States)

    Coronado-Aceves, Enrique Wenceslao; Sánchez-Escalante, José Jesús; López-Cervantes, Jaime; Robles-Zepeda, Ramón Enrique; Velázquez, Carlos; Sánchez-Machado, Dalia Isabel; Garibay-Escobar, Adriana

    2016-08-22

    Tuberculosis (TB) is an infectious disease mainly caused by Mycobacterium tuberculosis (Mtb), which generates 9 million new cases worldwide each year. The Mayo ethnicity of southern Sonora, Mexico is more than 2000 years old, and the Mayos possess extensive knowledge of traditional medicine. To evaluate the antimycobacterial activity levels of extracts of medicinal plants used by the Mayos against Mtb and Mycobacterium smegmatis (Msm) in the treatment of TB, respiratory diseases and related symptoms. A total of 34 plant species were collected, and 191 extracts were created with n-hexane, dichloromethane, ethyl acetate (EtOAc), methanol and water. Their minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) were determined against Mtb H37Rv using the microplate alamar blue assay (MABA) and against Msm using the resazurin microplate assay (REMA) at 6 and 2 days of exposure, respectively, and at concentrations of 250-1.9µg/mL (n-hexane extracts) and 1000-7.81µg/mL (extracts obtained with dichloromethane, EtOAc, methanol and water). Rhynchosia precatoria (Willd.) DC. (n-hexane root extract), Euphorbia albomarginata Torr. and A. Gray. (EtOAc shoot extract) and Helianthus annuus L. (n-hexane stem extract) were the most active plants against Mtb H37Rv, with MICs of 15.6, 250, 250µg/mL and MBCs of 31.25, 250, 250µg/mL, respectively. R. precatoria (root) was the only active plant against Msm, with MIC and MBC values of ≥250µg/mL. None of the aqueous extracts were active. This study validates the medicinal use of certain plants used by the Mayo people in the treatment of TB and related symptoms. R. precatoria, E. albomarginata and H. annuus are promising plant sources of active compounds that act against Mtb H37Rv. To our knowledge, this is the first time that their antimycobacterial activity has been reported. Crude extracts obtained with n-hexane, EtOAc and dichloromethane were the most active against Mtb H37Rv. Copyright © 2016

  15. Optimizing the patient transport function at Mayo Clinic.

    Science.gov (United States)

    Kuchera, Dustin; Rohleder, Thomas R

    2011-01-01

    In this article, we report on the implementation of a computerized scheduling tool to optimize staffing for patient transport at the Mayo Clinic. The tool was developed and implemented in Microsoft Excel and Visual Basic for Applications and includes an easy-to-use interface. The tool allows transport management to consider the trade-offs between patient waiting time and staffing levels. While improved staffing efficiency was a desire of the project, it was important that patient service quality was also maintained. The results show that staffing could be reduced while maintaining historical patient service levels.

  16. Patient quality of life in the Mayo Clinic Care Transitions program: a survey study

    Directory of Open Access Journals (Sweden)

    Faucher J

    2016-08-01

    Full Text Available Joshua Faucher,1 Jordan Rosedahl,2 Dawn Finnie,3 Amy Glasgow,3 Paul Takahashi4 1Mayo Medical School, Mayo Clinic College of Medicine, 2Division of Biomedical Statistics and Informatics, Department of Health Science Research, Mayo Clinic, 3Center for the Science of Health Care Delivery, 4Division of Primary Care Internal Medicine, Department of Medicine, Mayo Clinic, Rochester, MN, USA Background: Transitional care programs are common interventions aimed at reducing medical complications and associated readmissions for patients recently discharged from the hospital. While organizations strive to reduce readmissions, another important related metric is patient quality of life (QoL. Aims: To compare the relationship between QoL in patients enrolled in the Mayo Clinic Care Transitions (MCCT program versus usual care, and to determine if QoL changed in MCCT participants between baseline and 1-year follow-up. Methods: A baseline survey was mailed to MCCT enrollees in March 2013. Those who completed a baseline survey were sent a follow-up survey 1 year later. A cross-sectional survey of usual care participants was mailed in November 2013. We included in our analysis 199 participants (83 in the MCCT and 116 in usual care aged over 60 years with multiple comorbidities and receiving primary care. Primary outcomes were self-rated QoL; secondary outcomes included self-reported general, physical, and mental health. Intra- and intergroup comparisons of patients were evaluated using Pearson’s chi-squared analysis. Results: MCCT participants had more comorbidities and higher elder risk assessment scores than those receiving usual care. At baseline, 74% of MCCT participants reported responses of good-to-excellent QoL compared to 64% after 1 year (P=0.16. Between MCCT and usual care, there was no significant difference in self-reported QoL (P=0.21. Between baseline and follow-up in MCCT patients, and compared to usual care, there were no significant

  17. WE-B-Exhibit Hall-01: Ask the RO-ILS Experts

    Energy Technology Data Exchange (ETDEWEB)

    Ezzell, G [Mayo Clinic Arizona, Phoenix, AZ (United States); Sanscrainte, E [Clarity PSO, Chicago, IL (United States); Tomlinson, C [ASTRO, Fairfax, VA (United States)

    2015-06-15

    Have a question about RO-ILS: Radiation Oncology Incident Learning System™, or interested in learning more? Sponsored by the American Society for Radiation Oncology (ASTRO) and AAPM, RO-ILS is the only medical specialty society-sponsored incident learning system for radiation oncology. It facilitates safer and higher quality care in radiation oncology by providing a mechanism for shared learning in a secure and non-punitive environment. Please join our RO-ILS experts for a question and answer session on Wednesday, July 15th at 8:30 in the Partners in Solutions Room in Exhibit Hall C. Our experts include: Gary Ezzell, PhD, Mayo Clinic Arizona, [Brett Miller, Phillip Beron, and Derek Brown], Emily Sanscrainte from Clarity PSO and Cindy Tomlinson, MPP, ASTRO.

  18. Think big, start small, move fast a blueprint for transformation from the Mayo Clinic Center for Innovation

    CERN Document Server

    LaRusso, Nicholas; Farrugia, Gianrico

    2015-01-01

    The Only Innovation Guide You Will Ever Need--from the Award-Winning Minds at Mayo Clinic. A lot of businesspeople talk about innovation, but few companies have achieved the level of truly transformative innovation as brilliantly--or as famously--as the legendary Mayo Clinic. Introducing Think Big, Start Small, Move Fast, the first innovation guide based on the proven, decade-long program that’s made Mayo Clinic one of the most respected and successful organizations in the world. This essential must-have guide shows you how to: Inspire and ignite trailblazing innovation in your workplace Design a new business model that’s creative, collaborative, and sustainable Apply the traditional scientific method to the latest innovations in "design thinking" Build a customized toolkit of the best practices, project portfolios, and strategies Increase your innovation capacity--and watch how quickly you succeed These field-tested techniques grew out of the health care industry but are designed ...

  19. Trajectory similarity join in spatial networks

    KAUST Repository

    Shang, Shuo

    2017-09-07

    The matching of similar pairs of objects, called similarity join, is fundamental functionality in data management. We consider the case of trajectory similarity join (TS-Join), where the objects are trajectories of vehicles moving in road networks. Thus, given two sets of trajectories and a threshold θ, the TS-Join returns all pairs of trajectories from the two sets with similarity above θ. This join targets applications such as trajectory near-duplicate detection, data cleaning, ridesharing recommendation, and traffic congestion prediction. With these applications in mind, we provide a purposeful definition of similarity. To enable efficient TS-Join processing on large sets of trajectories, we develop search space pruning techniques and take into account the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer algorithm. For each trajectory, the algorithm first finds similar trajectories. Then it merges the results to achieve a final result. The algorithm exploits an upper bound on the spatiotemporal similarity and a heuristic scheduling strategy for search space pruning. The algorithm\\'s per-trajectory searches are independent of each other and can be performed in parallel, and the merging has constant cost. An empirical study with real data offers insight in the performance of the algorithm and demonstrates that is capable of outperforming a well-designed baseline algorithm by an order of magnitude.

  20. Recrafting the neighbor-joining method

    Directory of Open Access Journals (Sweden)

    Pedersen Christian NS

    2006-01-01

    Full Text Available Abstract Background The neighbor-joining method by Saitou and Nei is a widely used method for constructing phylogenetic trees. The formulation of the method gives rise to a canonical Θ(n3 algorithm upon which all existing implementations are based. Results In this paper we present techniques for speeding up the canonical neighbor-joining method. Our algorithms construct the same phylogenetic trees as the canonical neighbor-joining method. The best-case running time of our algorithms are O(n2 but the worst-case remains O(n3. We empirically evaluate the performance of our algoritms on distance matrices obtained from the Pfam collection of alignments. The experiments indicate that the running time of our algorithms evolve as Θ(n2 on the examined instance collection. We also compare the running time with that of the QuickTree tool, a widely used efficient implementation of the canonical neighbor-joining method. Conclusion The experiments show that our algorithms also yield a significant speed-up, already for medium sized instances.

  1. Willmore energy for joining of carbon nanostructures

    Science.gov (United States)

    Sripaturad, P.; Alshammari, N. A.; Thamwattana, N.; McCoy, J. A.; Baowan, D.

    2018-06-01

    Numerous types of carbon nanostructure have been found experimentally, including nanotubes, fullerenes and nanocones. These structures have applications in various nanoscale devices and the joining of these structures may lead to further new configurations with more remarkable properties and applications. The join profile between different carbon nanostructures in a symmetric configuration may be modelled using the calculus of variations. In previous studies, carbon nanostructures were assumed to deform according to perfect elasticity, thus the elastic energy, depending only on the axial curvature, was used to determine the join profile consisting of a finite number of discrete bonds. However, one could argue that the relevant energy should also involve the rotational curvature, especially when its size is comparable to the axial curvature. In this paper, we use the Willmore energy, a natural generalisation of the elastic energy that depends on both the axial and rotational curvatures. Catenoids are absolute minimisers of this energy and pieces of these may be used to join various nanostructures. We focus on the cases of joining a fullerene to a nanotube and joining two fullerenes along a common axis. By comparing our results with the earlier work, we find that both energies give similar joining profiles. Further work on other configurations may reveal which energy provides a better model.

  2. Using Negotiated Joining to Construct and Fill Open-ended Roles in Elite Culinary Groups.

    Science.gov (United States)

    Tan, Vaughn

    2015-03-01

    This qualitative study examines membership processes in groups operating in an uncertain environment that prevents them from fully predefining new members' roles. I describe how nine elite high-end, cutting-edge culinary groups in the U.S. and Europe, ranging from innovative restaurants to culinary R&D groups, use negotiated joining-a previously undocumented process-to systematically construct and fill these emergent, open-ended roles. I show that negotiated joining is a consistently patterned, iterative process that begins with a role that both aspirant and target group explicitly understand to be provisional. This provisional role is then jointly modified and constructed by the aspirant and target group through repeated iterations of proposition, validation through trial and evaluation, and selective integration of validated role components. The initially provisional role stabilizes and the aspirant achieves membership if enough role components are validated; otherwise the negotiated joining process is abandoned. Negotiated joining allows the aspirant and target group to learn if a mutually desirable role is likely and, if so, to construct such a role. In addition, the provisional roles in negotiated joining can support absorptive capacity by allowing novel role components to enter target groups through aspirants' efforts to construct stable roles for themselves, while the internal adjustment involved in integrating newly validated role components can have the unintended side effect of supporting adaptation by providing opportunities for the groups to use these novel role components to modify their role structure and goals to suit a changing and uncertain environment. Negotiated joining thus reveals role ambiguity's hitherto unexamined beneficial consequences and provides a foundation for a contingency theory of new-member acquisition.

  3. MICROWAVE JOINING OF ALUMINA CERAMIC AND HYDROXYLAPATITE BIOCERAMIC

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Microwave joining is a rapid developmental new techniqu e in recent years.This paper introduces a new microwave joining equipment which was made by our lab,succeeds in alumina ceramic-hydroxylapatite bioceramic j o in in the equipment, and analyzes the join situation of join boundary by using s canni ng electron microscope(SEM),this paper analyzes the mechanism of microwave joini ng also.

  4. Prospects of joining multi-material structures

    Science.gov (United States)

    Sankaranarayanan, R.; Hynes, N. Rajesh Jesudoss

    2018-05-01

    Spring up trends and necessities make the pipelines for the brand new Technologies. The same way, Multimaterial structures emerging as fruitful alternatives for the conventional structures in the manufacturing sector. Especially manufacturing of transport vehicles is placing a perfect platform for these new structures. Bonding or joining technology plays a crucial role in the field of manufacturing for sustainability. These latest structures are purely depending on such joining technologies so that multi-material structuring can be possible practically. The real challenge lies on joining dissimilar materials of different properties and nature. Escalation of thermoplastic usage in large structural components also faces similar ambiguity for joining multi-material structures. Adhesive bonding, mechanical fastening and are the answering technologies for multi-material structures. This current paper analysis the prospects of these bonding technologies to meet the challenges of tomorrow.

  5. Remembering Joseph Mayo and His Contributions to Animal Science | Poster

    Science.gov (United States)

    By Carolynne Keenan, Guest Writer In the 1990s, when Joseph Mayo, D.V.M, ran out of gas leading coworkers home from a meeting in Bethesda, he pulled over to the side of the road on I-270 and waited for help. He didn’t have to wait long; within a few minutes a passing motorist took pity on the group of scientists and offered them a lift back to Fort Detrick.

  6. Conjoint Forming - Technologies for Simultaneous Forming and Joining

    International Nuclear Information System (INIS)

    Groche, P; Wohletz, S; Mann, A; Krech, M; Monnerjahn, V

    2016-01-01

    The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena. (paper)

  7. Thin layer joining by gas adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Taga, Yasunori, E-mail: y-taga@isc.chubu.ac.jp; Fukumura, Toshio

    2014-10-01

    Highlights: • We report thin layer molecular joining between glass and COP by gas adsorption. Thickness of joining layer is 1–2 nm and joining process was carried out at low temperature at about 100 °C. • Adhesion strength measured by 180 degree peel test revealed to be 1–10 N/25 mm and the joined stack showed high durability for practical use. - Abstract: Attempt has been made to join borosilicate glass and cycloolefin (COP) polymer film by using gas adsorption method. After corona plasma treat, COP was exposed to (3-glycidoxypropyl) trimethoxysilane (GPS) and glass to (3-aminopropyl) triethoxysilane (APS) both in air atmosphere, resulting in co-adsorption of water vapor in the atmosphere and organosilane gases. Surface characterization of plasma treated and gas adsorbed surfaces was carried out by X-ray photoelectron spectroscopy (XPS) using Mg Kα X-ray source. Joining was carried out by a roll laminator after contact of both surfaces at room temperature, followed by annealing at 130 °C for 10 min. Adhesion strength was evaluated by 180 degree peel test based on ASTM D-903 and durability was examined under the conditions of 60 °C and 95% RH. It was found that after plasma treatment, complex functional groups such as C-H, C-O, C=O, O-C=O and CO{sub 3} were found on COP and O-H on glass. Thickness of GPS gas adsorption layer on COP was evaluated by the XPS to be at least 1.1 nm by taking inelastic mean free path of Si{sub 2p} photoelectron into consideration. Joining force was found to be more than 5 N/25 mm corresponding to almost equal to COP bulk tensile strength. In addition, durability of this adhesion strength remained unchanged over 2000 h even after exposure to the durability test conditions of 60 °C and 95% RH. The results can be explained in terms of formation of H-H hydrogen bonding and Si-O covalent bonding via silanols will be made at the interface as a result of lamination and annealing processes. In conclusion, ultrathin joining method

  8. Spatio-temporal joins on symbolic indoor tracking data

    DEFF Research Database (Denmark)

    Lu, Hua; Yang, Bin; Jensen, Christian S.

    2011-01-01

    and studies probabilistic, spatio-temporal joins on historical indoor tracking data. Two meaningful types of join are defined. They return object pairs that satisfy spatial join predicates either at a time point or during a time interval. The predicates considered include “same X,” where X is a semantic...

  9. Boolean Operations, Joins, and the Extended Low Hierarchy

    OpenAIRE

    Hemaspaandra, Lane A.; Jiang, Zhigen; Rothe, Joerg; Watanabe, Osamu

    1999-01-01

    We prove that the join of two sets may actually fall into a lower level of the extended low hierarchy than either of the sets. In particular, there exist sets that are not in the second level of the extended low hierarchy, EL_2, yet their join is in EL_2. That is, in terms of extended lowness, the join operator can lower complexity. Since in a strong intuitive sense the join does not lower complexity, our result suggests that the extended low hierarchy is unnatural as a complexity measure. We...

  10. Dr Albert L. Rhoton Jr's Time at the Mayo Clinic: The Beginnings of a Remarkable Career.

    Science.gov (United States)

    Rayan, Tarek; Carlson, Matthew L; Piepgras, David G; Link, Michael J; Van Gompel, Jamie J

    2017-08-09

    Dr Albert L. Rhoton Jr became the focal point of neurosurgery's evolution in understanding the intricate and complex microanatomy of the human brain over the last 4 decades. His pioneering work on cadaveric specimens proved to be a pivotal endeavor in the pursuit to better understand the complex microsurgical anatomy of cranial surgery. This paper details his early career at the Mayo Clinic in Rochester, Minnesota. A comprehensive review and synthesis of data acquired from the institutional historical archives including the Annual Reports to the Executive Committee, the Reports to the Board of Directors, the MAYOVOX Newsletter, the illustration archives of the Mayo Clinic Division of Creative Media, staff biographies, curriculum vitae, personal interviews, as well as full-text journal articles, and book publications was performed. Dr Rhoton was engaged in a busy clinical practice as a young staff at the Mayo Clinic. Records show he focused on tackling complex intracranial pathologies along with numerous basic research and neuroanatomy projects that became a major part of his life's work and passion. He was a great teacher and friend to countless individuals and his work will continue to impact and improve the care provided to neurosurgery patients for generations to come. Copyright © 2017 by the Congress of Neurological Surgeons.

  11. Joining elements of silicon carbide

    International Nuclear Information System (INIS)

    Olson, B.A.

    1979-01-01

    A method of joining together at least two silicon carbide elements (e.g.in forming a heat exchanger) is described, comprising subjecting to sufficiently non-oxidizing atmosphere and sufficiently high temperature, material placed in space between the elements. The material consists of silicon carbide particles, carbon and/or a precursor of carbon, and silicon, such that it forms a joint joining together at least two silicon carbide elements. At least one of the elements may contain silicon. (author)

  12. Recrafting the Neighbor-Joining Method

    DEFF Research Database (Denmark)

    Mailund; Brodal, Gerth Stølting; Fagerberg, Rolf

    2006-01-01

    Background: The neighbor-joining method by Saitou and Nei is a widely used method for constructing phylogenetic trees. The formulation of the method gives rise to a canonical Θ(n3) algorithm upon which all existing implementations are based. Methods: In this paper we present techniques for speeding...... up the canonical neighbor-joining method. Our algorithms construct the same phylogenetic trees as the canonical neighbor-joining method. The best-case running time of our algorithms are O(n2) but the worst-case remains O(n3). We empirically evaluate the performance of our algoritms on distance...... matrices obtained from the Pfam collection of alignments. Results: The experiments indicate that the running time of our algorithms evolve as Θ(n2) on the examined instance collection. We also compare the running time with that of the QuickTree tool, a widely used efficient implementation of the canonical...

  13. Join or be excluded from biomedicine? JOINS and Post-colonial Korea.

    Science.gov (United States)

    Ma, Eunjeong

    2015-04-01

    This paper discusses re-emergence of Korean medicine(s) in the global context with a focus on a natural drug JOINS, a highly contentious drug regarding its legal status. By following through its life world, the paper contends that the drug is the embodiment of the postcolonial anxiety that crosses the intersections between the aspiring nation and globalizing strategies of the bio-pharmaceutical industry. JOINS is a natural drug prescribed to alleviate the symptoms of degenerative arthritis. SK Chemicals, Ltd., a giant domestic pharmaceutical company developed the drug by utilizing the knowledge of traditional pharmacopeia and put it on the market in 2001. In the domestic market, the drug is treated as a prescription drug, implying that Western medicine-trained doctors (as opposed to Korean medicine doctors) are entitled to prescribe drugs. It also indicates that the drug has undergone a series of lab tests such as toxicity, efficacy, and clinical trials in compliance with regulatory guidelines. However, the domestic standards are not rigorous enough to satisfy international standards, so that it is exported as a nutritional supplement abroad. The government, the pharmaceutical industry, and the Western medicine profession are happy with how the drug stands domestically and internationally. Rather, it is Korean doctors who try to disrupt the status quo and reclaim their rights to traditional knowledge, who have been alienated from the pharmaceuticalization of traditional knowledge. Thus, the JOINS tablet embodies the complex web of modern Korean society, professional interests, the pharmaceutical industry, and globalization.

  14. Building a protocol expressway: the case of Mayo Clinic Cancer Center.

    Science.gov (United States)

    McJoynt, Terre A; Hirzallah, Muhanad A; Satele, Daniel V; Pitzen, Jason H; Alberts, Steven R; Rajkumar, S Vincent

    2009-08-10

    Inconsistencies and errors resulting from nonstandard processes, together with redundancies, rework, and excess workload, lead to extended time frames for clinical trial protocol development. This results in dissatisfaction among sponsors, investigators, and staff and restricts the availability of novel treatment options for patients. A team of experts from Mayo Clinic formed, including Protocol Development Unit staff and management from the three Mayo Clinic campuses (Florida, Minnesota, and Arizona), a systems and procedures analyst, a quality office analyst, and two physician members to address the identified deficiencies. The current-state process was intensively reviewed, and improvement steps were taken to accelerate the development and approval of cancer-related clinical trials. The primary goal was to decrease the time from receipt of a new protocol through submission to an approving authority, such as the National Cancer Institute or institutional review board. Using the Define, Measure, Analyze, Improve, Control (DMAIC) framework infused with Lean waste-reduction methodologies, areas were identified for improvement, including enhancing first-time quality and processing new studies on a first-in/first-out basis. The project was successful in improving the mean turnaround time for internally authored protocols (P Lean methodologies is an effective tool to structure the definition, planning, analysis, and implementation of significant process changes.

  15. The Arabic Version of the Mayo-Portland Adaptability Inventory 4: A Validation Study

    Science.gov (United States)

    Hamed, Razan; Tariah, Hashem Abu; Malkawi, Somaya; Holm, Margo B.

    2012-01-01

    The Mayo-Portland Adaptability Inventory 4 (MPAI-4) is a valid and reliable assessment tool to detect clinical impairments in patients with acquired brain injury. The tool is widely used by rehabilitation therapists worldwide, given its good psychometric properties and its availability in several languages. The purpose of this study was to…

  16. JOINING DISSIMILAR MATERIALS USING FRICTION STIR SCRIBE TECHNIQUE

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep; Fifield, Leonard S.

    2016-09-01

    Development of robust and cost effective method of joining dissimilar materials can provide a critical pathway to enable widespread use of multi-material design and components in mainstream industrial applications. The use of multi-material components such as Steel-Aluminum, Aluminum-Polymer allows design engineers to optimize material utilization based on service requirements and often lead weight and cost reductions. However producing an effective joint between materials with vastly different thermal, microstructural and deformation response is highly problematic using conventional joining and /or fastening methods. This is especially challenging in cost sensitive high volume markets that largely rely on low–cost joining solutions. Friction Stir Scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like Magnesium and Aluminum to high temperature materials like Steels and Titanium. Additionally viable joints between polymer composites and metal can also be made using this method. This paper will present state of the art, progress made and challenges associated with this innovative derivative of Friction Stir welding in reference to joining dissimilar metals and polymer/metal combinations.

  17. Joining Dissimilar Materials Using Friction Stir Scribe Technique

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Piyush [Pacific Northwest National Laboratory, Richland 99352, WA e-mail: piyush.upadhyay@pnnl.gov; Hovanski, Yuri [Pacific Northwest National Laboratory, Richland 99352, WA; Jana, Saumyadeep [Pacific Northwest National Laboratory, Richland 99352, WA; Fifield, Leonard S. [Pacific Northwest National Laboratory, Richland 99352, WA

    2016-10-03

    Development of a robust and cost-effective method of joining dissimilar materials could provide a critical pathway to enable widespread use of multi-material designs and components in mainstream industrial applications. The use of multi-material components such as steel-aluminum and aluminum-polymer would allow design engineers to optimize material utilization based on service requirements and could often lead to weight and cost reductions. However, producing an effective joint between materials with vastly different thermal, microstructural, and deformation responses is highly problematic using conventional joining and/or fastening methods. This is especially challenging in cost sensitive, high volume markets that largely rely on low cost joining solutions. Friction stir scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like magnesium and aluminum to high temperature materials like steel and titanium. Viable joints between polymer composites and metal can also be made using this method. This paper will present the state of the art, progress made, and challenges associated with this innovative derivative of friction stir welding in reference to joining dissimilar metals and polymer/metal combinations.

  18. Joining of porous silicon carbide bodies

    Science.gov (United States)

    Bates, Carl H.; Couhig, John T.; Pelletier, Paul J.

    1990-05-01

    A method of joining two porous bodies of silicon carbide is disclosed. It entails utilizing an aqueous slip of a similar silicon carbide as was used to form the porous bodies, including the sintering aids, and a binder to initially join the porous bodies together. Then the composite structure is subjected to cold isostatic pressing to form a joint having good handling strength. Then the composite structure is subjected to pressureless sintering to form the final strong bond. Optionally, after the sintering the structure is subjected to hot isostatic pressing to further improve the joint and densify the structure. The result is a composite structure in which the joint is almost indistinguishable from the silicon carbide pieces which it joins.

  19. Efficient string similarity join in multi-core and distributed systems.

    Directory of Open Access Journals (Sweden)

    Cairong Yan

    Full Text Available In big data area a significant challenge about string similarity join is to find all similar pairs more efficiently. In this paper, we propose a parallel processing framework for efficient string similarity join. First, the input is split into some disjoint small subsets according to the joint frequency distribution and the interval distribution of strings. Then the filter-verification strategy is adopted in the computation of string similarity for each subset so that the number of candidate pairs is reduced before an effective pruning strategy is used to improve the performance. Finally, the operation of string join is executed in parallel. Para-Join algorithm based on the multi-threading technique is proposed to implement the framework in a multi-core system while Pada-Join algorithm based on Spark platform is proposed to implement the framework in a cluster system. We prove that Para-Join and Pada-Join cannot only avoid reduplicate computation but also ensure the completeness of the result. Experimental results show that Para-Join can achieve high efficiency and significantly outperform than state-of-the-art approaches, meanwhile, Pada-Join can work on large datasets.

  20. Exploring the uncertainties of early detection results: Model-based interpretation of mayo lung project

    NARCIS (Netherlands)

    L. Shi (Lu); H. Tian (Haijun); W.J. McCarthy (William); B. Berman (Barbara); S. Wu (Shinyi); R. Boer (Rob)

    2011-01-01

    textabstractBackground: The Mayo Lung Project (MLP), a randomized controlled clinical trial of lung cancer screening conducted between 1971 and 1986 among male smokers aged 45 or above, demonstrated an increase in lung cancer survival since the time of diagnosis, but no reduction in lung cancer

  1. Strategic performance management: development of a performance measurement system at the Mayo Clinic.

    Science.gov (United States)

    Curtright, J W; Stolp-Smith, S C; Edell, E S

    2000-01-01

    Managing and measuring performance become exceedingly complex as healthcare institutions evolve into integrated health systems comprised of hospitals, outpatient clinics and surgery centers, nursing homes, and home health services. Leaders of integrated health systems need to develop a methodology and system that align organizational strategies with performance measurement and management. To meet this end, multiple healthcare organizations embrace the performance-indicators reporting system known as a "balanced scorecard" or a "dashboard report." This discrete set of macrolevel indicators gives senior management a fast but comprehensive glimpse of the organization's performance in meeting its quality, operational, and financial goals. The leadership of outpatient operations for Mayo Clinic in Rochester, Minnesota built on this concept by creating a performance management and measurement system that monitors and reports how well the organization achieves its performance goals. Internal stakeholders identified metrics to measure performance in each key category. Through these metrics, the organization links Mayo Clinic's vision, primary value, core principles, and day-to-day operations by monitoring key performance indicators on a weekly, monthly, or quarterly basis.

  2. Smoking trends amongst young doctors of a tertiary care hospital - Mayo Hospital, Lahore - Pakistan

    International Nuclear Information System (INIS)

    Chudhary, M.K.; Younis, M.; Bukhari, M.H.

    2011-01-01

    The World Health Organization cites tobacco use as one of the biggest public health threats the world has ever faced. Tobacco is the number one preventable cause of disability and death. Tobacco has many negative health effects which many of the smokers know them well. In Pakistan tobacco use is common in general public and the health professionals don't lack behind this habit. To study the smoking trends amongst young doctors of Mayo Hospital. Questionnaire based descriptive study. This study was conducted at the Institute of Chest Medicine, Mayo Hospital - A tertiary care hospital affiliated with King Edward Medical University, Lahore. Out of 250 doctors, 180 (72%) were males and 70 (28%) were female. Amongst 180 male doctors 97 (53.88%) were smokers and 83 (46.21%) were non smokers. Amongst 70 female doctors 8 (11.43%) were smokers and 62 (88.57%) were non smokers. Smoking is common among male young doctors but it is less common in female doctors. (author)

  3. A Modeling Approach for Plastic-Metal Laser Direct Joining

    Science.gov (United States)

    Lutey, Adrian H. A.; Fortunato, Alessandro; Ascari, Alessandro; Romoli, Luca

    2017-09-01

    Laser processing has been identified as a feasible approach to direct joining of metal and plastic components without the need for adhesives or mechanical fasteners. The present work sees development of a modeling approach for conduction and transmission laser direct joining of these materials based on multi-layer optical propagation theory and numerical heat flow simulation. The scope of this methodology is to predict process outcomes based on the calculated joint interface and upper surface temperatures. Three representative cases are considered for model verification, including conduction joining of PBT and aluminum alloy, transmission joining of optically transparent PET and stainless steel, and transmission joining of semi-transparent PA 66 and stainless steel. Conduction direct laser joining experiments are performed on black PBT and 6082 anticorodal aluminum alloy, achieving shear loads of over 2000 N with specimens of 2 mm thickness and 25 mm width. Comparison with simulation results shows that consistently high strength is achieved where the peak interface temperature is above the plastic degradation temperature. Comparison of transmission joining simulations and published experimental results confirms these findings and highlights the influence of plastic layer optical absorption on process feasibility.

  4. QuickJoin—Fast Neighbour-Joining Tree Reconstruction

    DEFF Research Database (Denmark)

    Mailund; Pedersen, Christian N. Storm

    2004-01-01

    We have built a tool for fast construction of very large phylogenetic trees. The tool uses heuristics for speeding up the neighbour-joining algorithm—while still constructing the same tree as the original neighbour-joining algorithm—making it possible to construct trees for ~8000 species in less...

  5. Fermilab Friends for Science Education | Join Us

    Science.gov (United States)

    Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Join Us improving science (science, technology, engineering and mathematics) education. Your donation allows us to membership dues allow us to create new, innovative science education programs, making the best use of unique

  6. Validation of the Mayo Clinic Staging System in Determining Prognoses of Patients With Perihilar Cholangiocarcinoma

    NARCIS (Netherlands)

    Coelen, Robert J. S.; Gaspersz, Marcia P.; Labeur, Tim A.; van Vugt, Jeroen L. A.; van Dieren, Susan; Willemssen, François E. J. A.; Nio, Chung Y.; Ijzermans, Jan N. M.; Klümpen, Heinz-Josef; Groot Koerkamp, Bas; van Gulik, Thomas M.

    2017-01-01

    BACKGROUND & AIMS: Most systems for staging perihilar cholangiocarcinoma (PHC) have been developed for the minority of patients with resectable disease. The recently developed Mayo Clinic system for staging PHC requires only clinical and radiologic variables, but has not yet been validated. We

  7. New Joining Technology for Optimized Metal/Composite Assemblies

    Directory of Open Access Journals (Sweden)

    Holger Seidlitz

    2014-01-01

    Full Text Available The development of a new joining technology, which is used to manufacture high strength hybrid constructions with thermoplastic composites (FRP and metals, is introduced. Similar to natural regulation effects at trees, fibers around the FRP joint become aligned along the lines of force and will not be destroyed by the joining process. This is achieved by the local utilization of the specific plastic flow properties of the FRT and metal component. Compared with usual joining methods—such as flow drill screws, blind and self-piercing rivets—noticeably higher tensile properties can be realized through the novel process management. The load-bearing capability increasing effect could be proved on hybrid joints with hot-dip galvanized steel HX420LAD and orthotropic glass—as well as carbon—fiber reinforced plastics. The results, which were determined in tensile-shear and cross-shear tests according to DIN EN ISO 14273 and DIN EN ISO 14272, are compared with holding loads of established joining techniques with similar joining point diameter and material combinations.

  8. Microwave joining of SiC ceramics and composites

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, I.; Silberglitt, R.; Tian, Y.L. [FM Technologies, Inc., Fairfax, VA (United States); Katz, J.D. [Los Alamos National Lab., NM (United States)

    1997-04-01

    Potential applications of SiC include components for advanced turbine engines, tube assemblies for radiant burners and petrochemical processing and heat exchangers for high efficiency electric power generation systems. Reliable methods for joining SiC are required in order to cost-effectively fabricate components for these applications from commercially available shapes and sizes. This manuscript reports the results of microwave joining experiments performed using two different types of SiC materials. The first were on reaction bonded SiC, and produced joints with fracture toughness equal to or greater than that of the base material over an extended range of joining temperatures. The second were on continuous fiber-reinforced SiC/SiC composite materials, which were successfully joined with a commercial active brazing alloy, as well as by using a polymer precursor.

  9. Enabling Dissimilar Material Joining Using Friction Stir Scribe Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Upadyay, Piyush; Kleinbaum, Sarah; Carlson, Blair; Boettcher, Eric; Ruokolainen, Robert

    2017-04-05

    One challenge in adapting welding processes to dissimilar material joining is the diversity of melting temperatures of the different materials. Although the use of mechanical fasteners and adhesives have mostly paved the way for near-term implementation of dissimilar material systems, these processes only accentuate the need for low-cost welding processes capable of joining dissimilar material components regardless of alloy, properties, or melting temperature. Friction stir scribe technology was developed to overcome the challenges of joining dissimilar material components where melting temperatures vary greatly, and properties and/or chemistry are not compatible with more traditional welding processes. Although the friction stir scribe process is capable of joining dissimilar metals and metal/polymer systems, a more detailed evaluation of several aluminum/steel joints is presented herein to demonstrate the ability to both chemically and mechanically join dissimilar materials.

  10. 8 de Mayo ... día internacional de la mujer

    OpenAIRE

    Gutiérrez González, Acela Elena

    1987-01-01

    Al movimiento feminista lo podemos dividir en dos etapas. La primera corresponde a su lucha por la igualdad de derechos civiles que concluye en los países europeos y Norteamérica con la finalización de la segunda guerra mundial. La segunda etapa es política. En Latinoamérica surge con el nacimiento de la revolución cubana. En los países europeos, como consecuencia de la Primavera de Praga, el Mayo Francés y la oposición de los jóvenes norteamericanos a intervenir militarmente en la autodeterm...

  11. On the Complexity of Inner Product Similarity Join

    DEFF Research Database (Denmark)

    Ahle, Thomas Dybdahl; Pagh, Rasmus; Razenshteyn, Ilya

    2016-01-01

    A number of tasks in classification, information retrieval, recommendation systems, and record linkage reduce to the core problem of inner product similarity join (IPS join): identifying pairs of vectors in a collection that have a sufficiently large inner product. IPS join is well understood when...... bounds for (A)LSH-based algorithms. In particular, we show that asymmetry can be avoided by relaxing the LSH definition to only consider the collision probability of distinct elements. A new indexing method for IPS based on linear sketches, implying that our hardness results are not far from being tight...

  12. Effects of processing parameters on Be/CuCrZr joining

    International Nuclear Information System (INIS)

    Park, Jeong-Yong; Lee, Jung-Suk; Choi, Byung-Kwon; Park, Sang-Yun; Hong, Bong Guen; Jeong, Yong Hwan; Jung, Ki-Jung

    2007-01-01

    A joining of Be/CuCrZr has been considered as the key technology for the fabrication of the ITER first wall. Among the joining methods, Hot isostatic pressing (HIP), which is one of the diffusion bonding methods, is the most feasible method to join the Be and CuCrZr alloy. In the HIP joining of Be and CuCrZr, the interlayer was used to prevent the formation of brittle intermetallic compounds in the interface. Therefore, it is crucial to select a suitable interlayer for a joining of Be and CuCrZr. On the other hand, the diffusion between Be and CuCrZr would be enhanced with an increase of the HIP joining temperature, thereby increasing the joint strength. However, the HIP joining temperature is limited by the mechanical properties of CuCrZr. During the fabrication process of the ITER first wall, CuCrZr is subjected to several thermal cycles including a solution annealing, a cooling and an aging. The HIP joining of Be and CuCrZr corresponds to the aging of CuCrZr. The HIP joining at a higher temperature would cause a degradation of the mechanical properties of CuCrZr by an overaging effect although it is preferable for an improvement of the joint strength. In this study, the effect of the cooling rate on the mechanical properties of aged CuCrZr was investigated to find the maximum HIP temperature without a degradation of the mechanical properties of CuCrZr

  13. Nurse practitioners and physician assistants: preparing new providers for hospital medicine at the mayo clinic.

    Science.gov (United States)

    Spychalla, Megan T; Heathman, Joanne H; Pearson, Katherine A; Herber, Andrew J; Newman, James S

    2014-01-01

    Hospital medicine is a growing field with an increasing demand for additional healthcare providers, especially in the face of an aging population. Reductions in resident duty hours, coupled with a continued deficit of medical school graduates to appropriately meet the demand, require an additional workforce to counter the shortage. A major dilemma of incorporating nonphysician providers such as nurse practitioners and physician assistants (NPPAs) into a hospital medicine practice is their varying academic backgrounds and inpatient care experiences. Medical institutions seeking to add NPPAs to their hospital medicine practice need a structured orientation program and ongoing NPPA educational support. This article outlines an NPPA orientation and training program within the Division of Hospital Internal Medicine (HIM) at the Mayo Clinic in Rochester, MN. In addition to a practical orientation program that other institutions can model and implement, the division of HIM also developed supplemental learning modalities to maintain ongoing NPPA competencies and fill learning gaps, including a formal NPPA hospital medicine continuing medical education (CME) course, an NPPA simulation-based boot camp, and the first hospital-based NPPA grand rounds offering CME credit. Since the NPPA orientation and training program was implemented, NPPAs within the division of HIM have gained a reputation for possessing a strong clinical skill set coupled with a depth of knowledge in hospital medicine. The NPPA-physician model serves as an alternative care practice, and we believe that with the institution of modalities, including a structured orientation program, didactic support, hands-on learning, and professional growth opportunities, NPPAs are capable of fulfilling the gap created by provider shortages and resident duty hour restrictions. Additionally, the use of NPPAs in hospital medicine allows for patient care continuity that is otherwise missing with resident practice models.

  14. Joining of Gamma Titanium Aluminides

    National Research Council Canada - National Science Library

    Baeslack, William

    2002-01-01

    .... Although organized and presented by joining process, many of the observations made and relationships developed, particularly those regarding the weldability and welding metallurgy of gamma titanium...

  15. [Early prenatal diagnosis of diprosopic syncephalic joined twins].

    Science.gov (United States)

    Picaud, A; Nlome-Nze, A R; Engongha-Beka, T; Ogowet-Igumu, N

    1990-06-01

    The authors summarize the case of diprosopic syncephalic joined twins diagnosed at 22 weeks of pregnancy by ultrasonography performed because of hydramnios. The rate of separation anomalies of monozygotic twins is assessed by a review of the literature: from 1 to twenty to fifty thousands for joined twins to 1 per cent fifty thousand to fifteen millions for diprosopus. The etiology is the result of a late division of the egg between D12 and D16. Often an encephalic diprosopic joined twins cause elevated levels of maternal serum alpha protein. Early ultrasonography permits to consider a vaginal therapeutic abortion.

  16. Deluges of Grandeur: Water, Territory, and Power on Northwest Mexico’s Río Mayo, 1880-1910

    Directory of Open Access Journals (Sweden)

    Jeffrey M. Banister

    2011-02-01

    Full Text Available Northwest Mexico’s irrigation landscape, known today as El Distrito de Riego 038, or El Valle del Mayo, issues from historical struggles to build an official order out of a diverse world of signs, symbols, processes, places, and peoples. It is the ancestral home of the Yoreme (Mayo, an indigenous group for whom colonisation and agricultural development have meant the loss of autonomy and of the seasonal mobility required to subsist in an arid land. It is also the birthplace of President Álvaro Obregón, a one-time chickpea farmer who transformed late-19th century irrigation praxis into the laws and institutions of 20th century water management. Reshaping territory for the ends of centralising ('federalising' water resources has always proved exceedingly difficult in the Mayo. But this was particularly so in the beginning of the federalisation process, a time of aggressive modernisation under the direction of President Porfirio Díaz (1876-1910. Research on Mexican hydraulic politics and policy, with some important exceptions, has tended to focus on the scale and scope of centralisation. Scholars have paid less attention to the moments and places where water escapes officials’ otherwise ironclad grasp. This paper explores water governance (and state formation more broadly in the late 19th century, on the eve of Mexico’s 1910 Revolution, as an ongoing, ever-inchoate series of territorial claims and projects. Understanding the weaknesses and incompleteness of such projects offers critical insight into post-revolutionary and/or contemporary hydraulic politics.

  17. Joining NbTi superconductors by ultrasonic welding

    International Nuclear Information System (INIS)

    Hafstrom, J.W.; Killpatrick, D.H.; Niemann, R.C.; Purcell, J.R.; Thresh, H.R.

    1976-01-01

    An important consideration in the design and construction of large, high-field, superconducting magnets is the capability to fabricate reliable, high-strength, low-resistance joints. A process for joining NbTi, copper stabilized, superconducting composites by ultrasonic welding is described. This process yields a joint strength comparable to that of the superconducting composite and a resistivity significantly lower than achieved by conventional soft soldering. The superconducting properties of the composite are not affected by the joining process. Scarfing the joint to maintain a constant conductor cross section does not degrade its electrical or mechanical properties. The application of the ultrasonic joining process, including process control, scarfing, and NDT procedures, in the construction of the superconducting magnet (U.S. SCMS) for the joint U. S. -- Soviet MHD program is described

  18. Quality improvement education incorporated as an integral part of critical care fellows training at the Mayo Clinic.

    Science.gov (United States)

    Kashani, Kianoush B; Ramar, Kannan; Farmer, J Christopher; Lim, Kaiser G; Moreno-Franco, Pablo; Morgenthaler, Timothy I; Dankbar, Gene C; Hale, Curt W

    2014-10-01

    The Accreditation Council for Graduate Medical Education emphasizes quality improvement (QI) education in residency/fellowship training programs. The Mayo Clinic Combined Critical Care Fellowship (CCF) program conducted a pilot QI education program to incorporate QI training as a required curriculum for the 2010-2011 academic year. CCF collaborated with the Mayo Quality Academy to customize and teach the existing Mayo Quality Fellows curriculum to the CCF fellows with the help of two quality coaches over five months starting July 2010. All fellows were to achieve Bronze and Silver certification prior to graduation. Silver required passing four written exams and submitting a health care QI project. Five projects were selected on the basis of the Impact-Effort Prioritization matrix, and DMAIC (Define, Measure, Analyze, Improve, and Control) methodology was used to complete the projects. The primary outcome was to assess learners' satisfaction, knowledge, and skill transfer. All 20 fellows were Bronze certified, and 14 (70%) were Silver certified by the time of graduation. All five QI projects were completed and showed positive impacts on patient safety and care. Surveys showed improved learner satisfaction. Graduates felt the QI training improved their QI skills and employment and career advancement. The QI curriculum had appropriate content and teaching pace and did not significantly displace other important clinical core curriculum topics. The pilot was successfully implemented in the CCF program and now is in the fourth academic year as an established and integral part of the fellowship core curriculum.

  19. Actitud del gobierno ante el 1º de mayo, desde 1890 hasta la Segunda República

    Directory of Open Access Journals (Sweden)

    Lucía Rivas Lara

    1988-01-01

    Full Text Available El 1° de Mayo, cuyo origen estuvo en la aspiración obrera a la jornada de ocho horas, se celebró por primera vez en Estados Unidos en 1886, después de muchos años de lucha de los trabajadores en los diversos países por el acortamiento de las jornadas, dado que hasta entonces habían sido de 12 a 16 horas según los lugares. Pero este 1° de mayo de 1886 tuvo un nacimiento espontáneo entre los trabajadores anarquistas norteamericanos, merced a la decisión de un congreso de la Federación Americana del Trabajo (AFL, sin perspectiva de continuidad ni trascendencia más allá de sus fronteras. No obstante, en el marco de su país tuvo un notable éxito consiguiendo con él muchos trabajadores la jornada de ocho horas, y sirviendo de precedente.

  20. Transition piece for joining together tubular pieces

    International Nuclear Information System (INIS)

    Holko, K.H.

    1981-01-01

    A transition piece for joining together tubular pieces formed respectively from a low alloy or carbon steel and a high temperature alloy containing at least 16% chromium includes a plurality of tubular parts welded together and formed from materials of selected composition with a maximum chromium content difference of 5% between adjacent parts when the chromium content of each part is below 10% and a maximum chromium difference of 7% between adjacent parts when the chromium content of either part is above 10%. The transition parts are also graded as to such characteristics as thermal expansion coefficient. The transition parts at opposite ends of the transition joint have chromium percentages similar to the tubular pieces to which they are to be joined. The parts may be joined by fusion and/or friction welding and parts may be formed by fusion weld deposition. (author)

  1. Summary of Dissimilar Metal Joining Trials Conducted by Edison Welding Institute

    Energy Technology Data Exchange (ETDEWEB)

    MJ Lambert

    2005-11-18

    Under the direction of the NASA-Glenn Research Center, the Edison Welding Institute (EWI) in Columbus, OH performed a series of non-fusion joining experiments to determine the feasibility of joining refractory metals or refractory metal alloys to Ni-based superalloys. Results, as reported by EWI, can be found in the project report for EWI Project 48819GTH (Attachment A, at the end of this document), dated October 10, 2005. The three joining methods used in this investigation were inertia welding, magnetic pulse welding, and electro-spark deposition joining. Five materials were used in these experiments: Mo-47Re, T-111, Hastelloy X, Mar M-247 (coarse-grained, 0.5 mm to several millimeter average grain size), and Mar M-247 (fine-grained, approximately 50 {micro}m average grain size). Several iterative trials of each material combination with each joining method were performed to determine the best practice joining method. Mo-47Re was found to be joined easily to Hastelloy X via inertia welding, but inertia welding of the Mo-alloy to both Mar M-247 alloys resulted in inconsistent joint strength and large reaction layers between the two metals. T-111 was found to join well to Hastelloy X and coarse-grained Mar M-247 via inertia welding, but joining to fine-grained Mar M-247 resulted in low joint strength. Magnetic pulse welding (MPW) was only successful in joining T-111 tubing to Hastelloy X bar stock. The joint integrity and reaction layer between the metals were found to be acceptable. This single joining trial, however, caused damage to the electromagnetic concentrators used in this process. Subsequent design efforts to eliminate the problem resulted in a loss of power imparted to the accelerating work piece, and results could not be reproduced. Welding trials of Mar M-247 to T-111 resulted in catastrophic failure of the bar stock, even at lower power. Electro-spark deposition joining of Mo-47Re, in which the deposited material was Hastelloy X, did not have a

  2. Summary of Dissimilar Metal Joining Trials Conducted by Edison Welding Institute

    International Nuclear Information System (INIS)

    MJ Lambert

    2005-01-01

    Under the direction of the NASA-Glenn Research Center, the Edison Welding Institute (EWI) in Columbus, OH performed a series of non-fusion joining experiments to determine the feasibility of joining refractory metals or refractory metal alloys to Ni-based superalloys. Results, as reported by EWI, can be found in the project report for EWI Project 48819GTH (Attachment A, at the end of this document), dated October 10, 2005. The three joining methods used in this investigation were inertia welding, magnetic pulse welding, and electro-spark deposition joining. Five materials were used in these experiments: Mo-47Re, T-111, Hastelloy X, Mar M-247 (coarse-grained, 0.5 mm to several millimeter average grain size), and Mar M-247 (fine-grained, approximately 50 (micro)m average grain size). Several iterative trials of each material combination with each joining method were performed to determine the best practice joining method. Mo-47Re was found to be joined easily to Hastelloy X via inertia welding, but inertia welding of the Mo-alloy to both Mar M-247 alloys resulted in inconsistent joint strength and large reaction layers between the two metals. T-111 was found to join well to Hastelloy X and coarse-grained Mar M-247 via inertia welding, but joining to fine-grained Mar M-247 resulted in low joint strength. Magnetic pulse welding (MPW) was only successful in joining T-111 tubing to Hastelloy X bar stock. The joint integrity and reaction layer between the metals were found to be acceptable. This single joining trial, however, caused damage to the electromagnetic concentrators used in this process. Subsequent design efforts to eliminate the problem resulted in a loss of power imparted to the accelerating work piece, and results could not be reproduced. Welding trials of Mar M-247 to T-111 resulted in catastrophic failure of the bar stock, even at lower power. Electro-spark deposition joining of Mo-47Re, in which the deposited material was Hastelloy X, did not have a

  3. Development of Joining Technologies for the ITER Blanket First Wall

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Byoung Kwon; Jung, Yang Il; Park, Dong Jun; Kim, Hyun Gil; Park, Sang Yoon; Park, Jeong Yong; Jeong, Yong Hwan; Lee, Dong Won; Kim, Suk Kwon [KAERI, Daejeon (Korea, Republic of)

    2011-01-15

    The design of the ITER blanket first wall includes the Beryllium amour tiles joined to CuCrZr heat sink with stainless steel cooling tubes. For the ITER application, the Be/CuCrZr/SS joint was proposed as a first wall material. The joining of Be/CuCrZr as well as CuCrZr/SS was generally carried out by using a hot isostatic pressing (CuC) in many countries. The joining strength for Be/CuCrZr is relatively lower than that for CuCrZr/SS, since we usually forms surface oxides (BeO) and brittle a metallics with Cu. Therefore, the joining technology for the Be/CuCrZr joint has been investigated. Be is apt to adsorb oxygen in an air atmosphere, so we should be etched to eliminate the surface pre-oxide using a chemical solution and Ar ions in a vacuum chamber. Then we is coated with a first was to prevent further oxidation. The kinds of a first we are chosen to be able to enhance the joining strength as inhibiting excessive be diffusion. The performance of the Be/CuCrZr/SS joint used for the ITER first wall is primarily dependent on the joining strength of the Be/CuCrZr interface. The Cr/Cu and Ti/Cr/Cu interlayers enabled the successful joining of be tile to CuCrZr plate. Moreover, ion-beam assisted deposition (IBAD) increased joining strength of the Be/CuCrZr joint mock-ups. IBAD induced the increased packing of depositing atoms, which resulted in denser and more adhesive interlayers. The interlayers formed by IBAD process revealed about 40% improved resistance to the scratch test. It is suggested that the improved adhesion of coating interlayers enabled tight joining of Be and CuCrZr blocks. As compared to without IBAD coating, the shear strength as well as the 4-point bend strength were increased more than 20% depending on interlayer types and coating conditions

  4. Development of Joining Technologies for the ITER Blanket First Wall

    International Nuclear Information System (INIS)

    Choi, Byoung Kwon; Jung, Yang Il; Park, Dong Jun; Kim, Hyun Gil; Park, Sang Yoon; Park, Jeong Yong; Jeong, Yong Hwan; Lee, Dong Won; Kim, Suk Kwon

    2011-01-01

    The design of the ITER blanket first wall includes the Beryllium amour tiles joined to CuCrZr heat sink with stainless steel cooling tubes. For the ITER application, the Be/CuCrZr/SS joint was proposed as a first wall material. The joining of Be/CuCrZr as well as CuCrZr/SS was generally carried out by using a hot isostatic pressing (CuC) in many countries. The joining strength for Be/CuCrZr is relatively lower than that for CuCrZr/SS, since we usually forms surface oxides (BeO) and brittle a metallics with Cu. Therefore, the joining technology for the Be/CuCrZr joint has been investigated. Be is apt to adsorb oxygen in an air atmosphere, so we should be etched to eliminate the surface pre-oxide using a chemical solution and Ar ions in a vacuum chamber. Then we is coated with a first was to prevent further oxidation. The kinds of a first we are chosen to be able to enhance the joining strength as inhibiting excessive be diffusion. The performance of the Be/CuCrZr/SS joint used for the ITER first wall is primarily dependent on the joining strength of the Be/CuCrZr interface. The Cr/Cu and Ti/Cr/Cu interlayers enabled the successful joining of be tile to CuCrZr plate. Moreover, ion-beam assisted deposition (IBAD) increased joining strength of the Be/CuCrZr joint mock-ups. IBAD induced the increased packing of depositing atoms, which resulted in denser and more adhesive interlayers. The interlayers formed by IBAD process revealed about 40% improved resistance to the scratch test. It is suggested that the improved adhesion of coating interlayers enabled tight joining of Be and CuCrZr blocks. As compared to without IBAD coating, the shear strength as well as the 4-point bend strength were increased more than 20% depending on interlayer types and coating conditions

  5. Inference of Large Phylogenies Using Neighbour-Joining

    DEFF Research Database (Denmark)

    Simonsen, Martin; Mailund, Thomas; Pedersen, Christian Nørgaard Storm

    2011-01-01

    The neighbour-joining method is a widely used method for phylogenetic reconstruction which scales to thousands of taxa. However, advances in sequencing technology have made data sets with more than 10,000 related taxa widely available. Inference of such large phylogenies takes hours or days using...... the Neighbour-Joining method on a normal desktop computer because of the O(n^3) running time. RapidNJ is a search heuristic which reduce the running time of the Neighbour-Joining method significantly but at the cost of an increased memory consumption making inference of large phylogenies infeasible. We present...... two extensions for RapidNJ which reduce the memory requirements and \\makebox{allows} phylogenies with more than 50,000 taxa to be inferred efficiently on a desktop computer. Furthermore, an improved version of the search heuristic is presented which reduces the running time of RapidNJ on many data...

  6. Mayo Alliance Prognostic Model for Myelodysplastic Syndromes: Integration of Genetic and Clinical Information.

    Science.gov (United States)

    Tefferi, Ayalew; Gangat, Naseema; Mudireddy, Mythri; Lasho, Terra L; Finke, Christy; Begna, Kebede H; Elliott, Michelle A; Al-Kali, Aref; Litzow, Mark R; Hook, C Christopher; Wolanskyj, Alexandra P; Hogan, William J; Patnaik, Mrinal M; Pardanani, Animesh; Zblewski, Darci L; He, Rong; Viswanatha, David; Hanson, Curtis A; Ketterling, Rhett P; Tang, Jih-Luh; Chou, Wen-Chien; Lin, Chien-Chin; Tsai, Cheng-Hong; Tien, Hwei-Fang; Hou, Hsin-An

    2018-06-01

    To develop a new risk model for primary myelodysplastic syndromes (MDS) that integrates information on mutations, karyotype, and clinical variables. Patients with World Health Organization-defined primary MDS seen at Mayo Clinic (MC) from December 28, 1994, through December 19, 2017, constituted the core study group. The National Taiwan University Hospital (NTUH) provided the validation cohort. Model performance, compared with the revised International Prognostic Scoring System, was assessed by Akaike information criterion and area under the curve estimates. The study group consisted of 685 molecularly annotated patients from MC (357) and NTUH (328). Multivariate analysis of the MC cohort identified monosomal karyotype (hazard ratio [HR], 5.2; 95% CI, 3.1-8.6), "non-MK abnormalities other than single/double del(5q)" (HR, 1.8; 95% CI, 1.3-2.6), RUNX1 (HR, 2.0; 95% CI, 1.2-3.1) and ASXL1 (HR, 1.7; 95% CI, 1.2-2.3) mutations, absence of SF3B1 mutations (HR, 1.6; 95% CI, 1.1-2.4), age greater than 70 years (HR, 2.2; 95% CI, 1.6-3.1), hemoglobin level less than 8 g/dL in women or less than 9 g/dL in men (HR, 2.3; 95% CI, 1.7-3.1), platelet count less than 75 × 10 9 /L (HR, 1.5; 95% CI, 1.1-2.1), and 10% or more bone marrow blasts (HR, 1.7; 95% CI, 1.1-2.8) as predictors of inferior overall survival. Based on HR-weighted risk scores, a 4-tiered Mayo alliance prognostic model for MDS was devised: low (89 patients), intermediate-1 (104), intermediate-2 (95), and high (69); respective median survivals (5-year overall survival rates) were 85 (73%), 42 (34%), 22 (7%), and 9 months (0%). The Mayo alliance model was subsequently validated by using the external NTUH cohort and, compared with the revised International Prognostic Scoring System, displayed favorable Akaike information criterion (1865 vs 1943) and area under the curve (0.87 vs 0.76) values. We propose a simple and contemporary risk model for MDS that is based on a limited set of genetic and clinical variables

  7. Action Learning Drives the Emerald Academy

    Science.gov (United States)

    Nalborczyk, Sarah; Sandelands, Luke

    2012-01-01

    This account examines the action learning process adopted by Emerald Group Publishing Ltd., embedded in the organization through the in-company Emerald Academy. In case study format, the paper emphasizes that in order to align learning with organizational objectives joined up thinking and practice is needed beyond the learning and development…

  8. Telemental Health Training, Team Building, and Workforce Development in Cultural Context: The Hawaii Experience.

    Science.gov (United States)

    Alicata, Daniel; Schroepfer, Amanda; Unten, Tim; Agoha, Ruby; Helm, Susana; Fukuda, Michael; Ulrich, Daniel; Michels, Stanton

    2016-04-01

    The goal of the University of Hawaii (UH) child and adolescent psychiatry telemental health (TMH) program is to train child and adolescent psychiatry fellows to provide behavioral health services for the children of Hawaii and the Pacific Islands in the cultural context of their rural communities using interactive videoteleconferencing (IVTC). The training experience balances learning objectives with community service. Learning objectives include: Understanding mental health disparities in rural communities, leveraging community resources in ongoing treatment, providing culturally effective care, and improving health care access and delivery through TMH service research and evaluation. We describe the UH experience. Several UH faculty are experienced with IVTC technology. They are triple-board trained, are recognized for their research in program evaluation and mental health disparities, and are committed to serving Hawaii's rural communities. We demonstrate the role of TMH in linking children and their families living in rural communities with multiple mental health treatment providers. The service-learning curriculum and a unique collaboration with Mayo Clinic provide the opportunity to examine the role of TMH in global service, and training, education, and research. TMH provides direct services to patients and consultation on Hawaii Island and Maui County. The collaboration with the Mayo Clinic brings further consultation in complex diagnostics, pharmacogenomics, and cross-cultural psychiatry. A curriculum provides trainees experience with IVTC with the goal of potential recruitment to underserved rural communities. The TMH program at UH is unique in its team building and workforce development by joining multiple entities through IVTC and translating expertise from the Mayo Clinic to rural communities, and strengthening collaboration with local child and adolescent psychiatrists, and primary care and other mental health providers. The UH psychiatry program is a

  9. Joining of thin thickness SiCf/SiC composites: research of a joining composition and of an associated elaboration process

    International Nuclear Information System (INIS)

    Jacques, E.

    2012-01-01

    The present work is part of the Fourth Generation Fast Reactors program. One of the key issues is the joining of the SiC f /SiC ceramic matrix composites (CMC) to seal the combustible cladding. At the present time, no chemical composition as a joint is refractive enough to face the expected operating temperatures. The aims of this study are the following: (1) the identification of a joining composition and its associated elaboration process answering the specifications, (2) the validation of a local and fast heating process and (3) the definition of mechanical tests to characterise these joinings. We describe the methodology and the results for joining SiC and SiC f /SiC substrates at solid and liquid state using metallic silicides. Joint integrity and joint strength can be improved by adding small SiC particles to the silicides powders. Chemical reactivity, wettability tests and thermomechanical properties analysis have been carried out on the joints. Cross sections of the assembly were prepared to study the joint/substrate chemical bonding, the cracking and the crack deflection in the vicinity of the interface. Also, one of the challenge consists in using a local heating at a high temperature (around 1800 C) for a short time to avoid the degradation of the composite structure. The assemblies have been then performed in an inductive furnace but in order to prepare the joining technology, trials of local heating have also been investigated with a CO 2 laser beam and a microwave generator. Finally, descriptions of the 4-points bending mechanical test used and the associated results are presented. (author) [fr

  10. Microstructure and properties of ceramics and composites joined by plastic deformation.

    Energy Technology Data Exchange (ETDEWEB)

    Goretta, K. C.; Singh, D.; Chen, N.; Gutierrez-Mora, F.; Lorenzo-Martin, M. de la, Cinta; Dominguez-Rodriguez, A.; Routbort, J. L.; Energy Systems; Univ. of Seville

    2008-12-01

    A review is presented of the design of suitable materials systems for joining by high-temperature plastic deformation, details of the joining techniques, microstructures and properties of the resulting composite bodies, and prospects and limitation for this type of joining technology. Joining parameters and resulting forms are discussed for Al{sub 2}O{sub 3}/mullite particulate composites, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} particulate/Al{sub 2}O{sub 3} particulate and whisker-reinforced composites, hydroxyapatite bioceramics, La{sub 0.85}Sr{sub 0.15}MnO{sub 3} electronic ceramics, MgF{sub 2} optical ceramics, and Ni{sub 3}Al intermetallics. Results are contrasted with those obtained by other methods of joining brittle, high-temperature materials, with special focus on durability and mechanical properties.

  11. Microstructure and properties of ceramics and composites joined by plastic deformation

    Energy Technology Data Exchange (ETDEWEB)

    Goretta, K.C. [Argonne National Laboratory, Argonne, IL 60439-4838 (United States)], E-mail: ken.goretta@aoard.af.mil; Singh, D.; Chen Nan [Argonne National Laboratory, Argonne, IL 60439-4838 (United States); Gutierrez-Mora, F.; Cinta Lorenzo-Martin, M. de la [Argonne National Laboratory, Argonne, IL 60439-4838 (United States); University of Seville, Seville 41080 (Spain); Dominguez-Rodriguez, A. [University of Seville, Seville 41080 (Spain); Routbort, J.L. [Argonne National Laboratory, Argonne, IL 60439-4838 (United States)

    2008-12-20

    A review is presented of the design of suitable materials systems for joining by high-temperature plastic deformation, details of the joining techniques, microstructures and properties of the resulting composite bodies, and prospects and limitation for this type of joining technology. Joining parameters and resulting forms are discussed for Al{sub 2}O{sub 3}/mullite particulate composites, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} particulate/Al{sub 2}O{sub 3} particulate and whisker-reinforced composites, hydroxyapatite bioceramics, La{sub 0.85}Sr{sub 0.15}MnO{sub 3} electronic ceramics, MgF{sub 2} optical ceramics, and Ni{sub 3}Al intermetallics. Results are contrasted with those obtained by other methods of joining brittle, high-temperature materials, with special focus on durability and mechanical properties.

  12. Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching

    International Nuclear Information System (INIS)

    Abe, Y.; Mori, K.; Kato, T.

    2011-01-01

    A mechanical clinching has the advantage of low running costs. However, the joint strength is not high. To improve the maximum load of the joined sheets by a mechanical clinching, square and rectangular mechanical clinching were introduced. In the mechanical clinching, the two sheets are mechanically joined by forming an interlock between the lower and upper sheets by the punch and die. The joined length with the interlock was increased by the rectangular punch and die. The deforming behaviours of the sheets in the mechanical clinching were investigated, and then the interlock in the sheets had distribution in the circumference of the projection. Although the interlocks were formed in both projection side and diagonal, the interlock in the diagonal was smaller because of the long contact length between the lower sheet and the die cavity surface. The maximum load of the joined sheets by the rectangular mechanical clinching was two times larger than the load by the round mechanical clinching.

  13. Fast and scalable inequality joins

    KAUST Repository

    Khayyat, Zuhair; Lucia, William; Singh, Meghna; Ouzzani, Mourad; Papotti, Paolo; Quiané -Ruiz, Jorge Arnulfo; Tang, Nan; Kalnis, Panos

    2016-01-01

    an incremental inequality join algorithm to handle scenarios where data keeps changing. We have implemented a centralized version of these algorithms on top of PostgreSQL, a distributed version on top of Spark SQL, and an existing data cleaning system, Nadeef

  14. Transformative Learning and Professional Identity Formation During International Health Electives: A Qualitative Study Using Grounded Theory.

    Science.gov (United States)

    Sawatsky, Adam P; Nordhues, Hannah C; Merry, Stephen P; Bashir, M Usmaan; Hafferty, Frederic W

    2018-03-27

    International health electives (IHEs) are widely available during residency and provide unique experiences for trainees. Theoretical models of professional identity formation and transformative learning may provide insight into residents' experiences during IHEs. The purpose of this study was to explore transformative learning and professional identity formation during resident IHEs and characterize the relationship between transformative learning and professional identity formation. The authors used a constructivist grounded theory approach, with the sensitizing concepts of transformative learning and professional identity formation to analyze narrative reflective reports of residents' IHEs. The Mayo International Health Program supports residents from all specialties across three Mayo Clinic sites. In 2015, the authors collected narrative reflective reports from 377 IHE participants dating from 2001-2014. Reflections were coded and themes were organized into a model for transformative learning during IHEs, focusing on professional identity. Five components of transformative learning were identified during IHEs: a disorienting experience; an emotional response; critical reflection; perspective change; and a commitment to future action. Within the component of critical reflection three domains relating to professional identity were identified: making a difference; the doctor-patient relationship; and medicine in its "purest form." Transformation was demonstrated through perspective change and a commitment to future action, including continued service, education, and development. IHEs provide rich experiences for transformative learning and professional identity formation. Understanding the components of transformative learning may provide insight into the interaction between learner, experiences, and the influence of mentors in the process of professional identity formation.

  15. 49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe: Qualifying joining procedures. 192... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

  16. The Social Media DNA of Mayo Clinic-and Health Care.

    Science.gov (United States)

    Kotsenas, Amy L; Aase, Lee; Arce, Makala; Timimi, Farris K; Dacy, Matthew; Young, Colleen; Wald, John T

    2018-01-01

    Hippocrates' admonition and the medical community's aversion to risk have caused many physicians and institutions to resist participation in modern social media sites such as Facebook (Facebook, Inc, Menlo Park, California, USA), Twitter (Twitter Inc, San Francisco, California, USA), and YouTube (San Mateo, California, USA). However, because Mayo Clinic's founders were champions of analog social networking, it was among the earliest hospitals worldwide to create official accounts on these digital platforms. A proper understanding of the traditional mechanisms of knowledge diffusion in medicine and of the nature of social media sites should help professionals see and embrace the opportunities for positive engagement in social media. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  17. Superplasticity and joining of zirconia-based ceramics

    International Nuclear Information System (INIS)

    Dominguez-Rodriguez, A.; Gutierrez-Mora, F.; Jimenez-Melendo, M.; Chaim, R.; Routbort, J. L.

    1999-01-01

    Steady-state creep and joining of alumina/zirconia composites containing alumina volume fractions of 20, 60, and 85% have been investigated between 1,250 and 1,350 C. Superplasticity of these compounds is controlled by grain-boundary sliding and the creep rate is a function of alumina volume fraction, not grain size. Using the principles of superplasticity, pieces of the composite have been joined by applying the stress required to achieve 5 to 10% strain to form a strong interface at temperatures as low as 1,200 C

  18. Superplasticity and joining of zirconia-based ceramics

    International Nuclear Information System (INIS)

    Gutierrez-Mora, F.; Dominguez-Rodriguez, A.; Jimenez-Melendo, M.; Chaim, R.; Ravi, G.B.; Routbort, J.L.

    2000-01-01

    Steady-state creep and joining of alumina/zirconia composites containing alumina volume fractions of 20, 60 and 85% have been investigated between 1,250 and 1,350 C. Superplasticity of these compounds is controlled by grain-boundary sliding and the creep rate is a function of alumina volume fraction, not grain size. Using the principles of superplasticity, pieces of the composite have been joined by applying the stress required to achieve 5 to 10% strain to form a strong interface at temperatures as low as 1,200 C

  19. Development of a procedure for forming assisted thermal joining of tubes

    Science.gov (United States)

    Chen, Hui; Löbbe, Christian; Staupendahl, Daniel; Tekkaya, A. Erman

    2018-05-01

    With the demand of lightweight design in the automotive industry, not only the wall-thicknesses of tubular components of the chassis or spaceframe are continuously decreased. Also the thicknesses of exhaust system parts are reduced to save material and mass. However, thinner tubular parts bring about additional challenges in joining. Welding or brazing methods, which are utilized in joining tubes with specific requirements concerning leak tightness, are sensitive to the gap between the joining partners. Furthermore, a large joining area is required to ensure the durability of the joint. The introduction of a forming step in the assembled state prior to thermal joining can define and control the gap for subsequent brazing or welding. The mechanical pre-joint resulting from the previously described calibration step also results in easier handling of the tubes prior to thermal joining. In the presented investigation, a spinning process is utilized to produce force-fit joints of varying lengths and diameter reduction and form-fit joints with varying geometrical attributes. The spinning process facilitates a high formability and geometrical flexibility, while at the achievable precision is high and the process forces are low. The strength of the joints is used to evaluate the joint quality. Finally, a comparison between joints produced by forming with subsequent brazing and original tube is conducted, which presents the high performance of the developed procedure for forming assisted thermal joining.

  20. Model Checking Processes Specified In Join-Calculus Algebra

    Directory of Open Access Journals (Sweden)

    Sławomir Piotr Maludziński

    2014-01-01

    Full Text Available This article presents a model checking tool used to verify concurrent systems specified in join-calculus algebra. The temporal properties of systems under verification are expressed in CTL logic. Join-calculus algebra with its operational semantics defined by the chemical abstract machine serves as the basic method for the specification of concurrent systems and their synchronization mechanisms, and allows the examination of more complex systems.

  1. El paro estudiantil de mayo de 1938

    Directory of Open Access Journals (Sweden)

    Orlando Moreno Martínez

    2009-07-01

    Full Text Available El presente artículo tiene como propósito analizar los sucesos ocurridos en la ciudad de Bogotá durante el paro estudiantil de mayo de 1938, programado para oponerse a algunas medidas de modernización y secularización educativa impuestas por el gobierno liberal del presidente Alfonso López Pumarejo. Específicamente, los estudiantes se levantaron contra el examen de revisión que se aplicaba al terminar la secundaria y el curso preparatorio que era un requisito para poder ingresar a la universidad. El escrito aborda la problemática suscitada por la reforma educativa, el desencadenamiento de la protesta estudiantil, las acciones desarrolladas por los estudiantes en la capital de la República, el impacto del movimiento en otras partes del país y las tendencias ideológicas que apoyaron el paro de estudiantes. A propósito de este último punto, si bien fue evidente el respaldo de la oposición conservadora, muchos estudiantes universitarios y de secundaria lucharon con convicción por lo que consideraron en su momento una arbitrariedad por parte del gobierno liberal.

  2. Glass-Metal Joining in Nuclear Environment: the State of the Art

    International Nuclear Information System (INIS)

    Jacobs, M.

    2007-01-01

    Full text of publication follows: In the ITER fusion machine and in material testing fission reactors, it is not possible to avoid the use of non-metallic materials like glass for example. There is therefore a need to apply metal to glass joints. This problem arose already at the beginning of the 19. century when the electric light bulb was invented. Nowadays this type of glass-metal joint is very successful and widely used in the electronic industry. In the case of ITER and material testing reactors, glass-metal joints are necessary for the fixation of the optical windows and optical fibres to a metal structure to perform diagnostics. These types of joints are still difficult to make and their behaviour is not fully understood. A joint between glass and metal for a nuclear or fusion application has indeed to resist high temperatures and high neutron fluences, while keeping a good mechanical strength and remaining leak tight. These characteristics are difficult to obtain under these severe conditions. This paper presents an overview of the different joining technologies that can be used to join glass to metal in a severe nuclear environment. The working mechanism of the technologies are explained, together with their respective advantages and drawbacks. Three different types of joining are discussed: fastening, liquid phase joining and solid phase joining. Fastening is a mechanical attachment technique, not achieving easily hermetic seals. Liquid and solid phase joining on the other hand form a real bond, what makes the joint much stronger. The most important technologies using liquid phase joining are adhesive bonding, fusion welding and brazing. In the case of the solid phase joining the choices are ultrasonic torsion welding, diffusion bonding and electrostatic bonding. If it is usually not possible to join the glass directly to the metal, an interlayer must be used. One speaks then of indirect joining. The paper will conclude with a discussion on the best

  3. Taiwan university joins search for antimatter

    CERN Multimedia

    Chiu, Y

    2002-01-01

    National Cheng Kung University announced yesterday that it will be joining the Alpha Magnetic Spectrometer, an international scientific research project aimed at looking for antimatter in space (1 page).

  4. High-energy electron beams for ceramic joining

    Science.gov (United States)

    Turman, Bob N.; Glass, S. J.; Halbleib, J. A.; Helmich, D. R.; Loehman, Ron E.; Clifford, Jerome R.

    1995-03-01

    Joining of structural ceramics is possible using high melting point metals such as Mo and Pt that are heated with a high energy electron beam, with the potential for high temperature joining. A 10 MeV electron beam can penetrate through 1 cm of ceramic, offering the possibility of buried interface joining. Because of transient heating and the lower heat capacity of the metal relative to the ceramic, a pulsed high power beam has the potential for melting the metal without decomposing or melting the ceramic. We have demonstrated the feasibility of the process with a series of 10 MeV, 1 kW electron beam experiments. Shear strengths up to 28 MPa have been measured. This strength is comparable to that reported in the literature for bonding silicon nitride (Si3N4) to molybdenum with copper-silver-titanium braze, but weaker than that reported for Si3N4 - Si3N4 with gold-nickel braze. The bonding mechanism appears to be formation of a thin silicide layer. Beam damage to the Si3N4 was also assessed.

  5. Delusional infestation is typically comorbid with other psychiatric diagnoses: review of 54 patients receiving psychiatric evaluation at Mayo Clinic.

    Science.gov (United States)

    Hylwa, Sara A; Foster, Ashley A; Bury, Jessica E; Davis, Mark D P; Pittelkow, Mark R; Bostwick, J Michael

    2012-01-01

    Delusional infestation, which encompasses both delusions of parasitosis and delusions of infestation with inanimate objects (sometimes called Morgellons disease), has been said to represent a distinct and encapsulated delusion, that is, a stand-alone diagnosis. Anecdotally, we have observed that patients with delusional infestation often have one or more psychiatric comorbid conditions and that delusional infestation should not be regarded as a stand-alone diagnosis. The purpose of this study was to identify whether patients with delusional infestation have psychiatric comorbid conditions. We therefore identified patients who had been formally evaluated in the Department of Psychiatry during their visit to Mayo Clinic. We retrospectively searched for and reviewed the cases of all patients with delusional infestation seen from 2001 through 2007 at Mayo Clinic, Rochester, Minnesota, and who underwent psychiatric evaluation. The diagnoses resulting from psychiatric evaluation were analyzed. During the 7-year study period, 109 patients seen for delusional infestation at Mayo Clinic were referred to the Department of Psychiatry, 54 (50%) of whom actually followed through with psychiatric consultation. Of these 54 patients, 40 (74%) received additional active psychiatric diagnoses; 14 patients (26%) had delusional infestation alone. Abnormal personality traits were rarely documented. Most patients with delusional infestation have multiple coexisting or underlying psychiatric disorders. Therefore, evaluation by a psychiatrist, when possible, is advised for all patients with delusional infestation. Copyright © 2012 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

  6. The US Supreme Court in Mayo v. Prometheus - Taking the fire from or to biotechnology and personalized medicine?

    DEFF Research Database (Denmark)

    Minssen, Timo; Nilsson, David

    2012-01-01

    On 20 March 2012, the US Supreme Court handed down its much awaited patent eligibility- ruling in the dispute between Prometheus Laboratories Inc (“Prometheus”), acting as plaintiffs, and Mayo Medical Laboratories (“Mayo”), as alleged infringers of Prometheus’ licensed patents. This case review w...

  7. Top scientists join Stephen Hawking at Perimeter Institute

    Science.gov (United States)

    Banks, Michael

    2009-03-01

    Nine leading researchers are to join Stephen Hawking as visiting fellows at the Perimeter Institute for Theoretical Physics in Ontario, Canada. The researchers, who include string theorists Leonard Susskind from Stanford University and Asoka Sen from the Harisch-Chandra Research Institute in India, will each spend a few months of the year at the institute as "distinguished research chairs". They will be joined by another 30 scientists to be announced at a later date.

  8. ROMANIA'S MACROECONOMIC ACHIEVEMENTS FOR JOINING THE UNIQUE EUROPEAN CURENCY

    Directory of Open Access Journals (Sweden)

    SILVIA POPESCU

    2011-04-01

    Full Text Available The Romanian government has announced plans to join the eurozone by 2015. Currently, the leu is not yet part of ERM II but plans to join in 2010-2012. The economic advantages of the monetary union grow with expansion of the Euro zone. There is also a high level of skepticism; the main fear about the Euro is the inflation –that is considerable promoted by the Euro currency’s exchange rate in comparison with 2002; another restraint is due to member states inability to establish their own interest rates. The IMF arose the option of joining the Euro zone criteria relaxing. A one-sided Euro’s joining was suggested by International Monetary Fund on March-April 2009, in a confidential report mentioned by The Financial Times as the emergent states in Central and Eastern Europe to be able to pass to the unique currency, but not being represented in the Central European Bank Board. By its side, CEB considers that emergent states of the European Union must not pass to the unique currency unilaterally, because such a fact could under-mine the trust in Euro currency worldwide. This option would hardly deepen the macroeconomic controversies inside the Euro zone and would contradict the previous conditions already imposed. An acceptable solution could be the fastening of emergent countries joining the Exchange Rate Mechanism 2, after they are aware of risks arisen by such a step. The European Commission endorses in the Convergence Report on 2010 that Romania doesn’t meet any criteria needed by passing to the unique European currency, respectively: prices stability; budget position of the government; stability of exchange rate; interest convergence on long run and there are also law impediments. Our paper discusses arguments for a faster passing to the Euro currency versus arguments for a late joining the Euro currency in Romania.

  9. The Mayo Clinic Arizona Spasmodic Dysphonia Experience: A Demographic Analysis of 718 Patients.

    Science.gov (United States)

    Patel, Alpen B; Bansberg, Stephen F; Adler, Charles H; Lott, David G; Crujido, Lisa

    2015-11-01

    Analyze demographic data collected over a 25-year experience of 718 patients with spasmodic dysphonia (SD) who have been treated with botulinum toxin-A (BoNT-A) and compare our data with previously published studies. Seven hundred eighteen patients with SD were treated with 6621 BoNT-A injections at Mayo Clinic Arizona between 1989 and 2014. All patients were treated by the same physician team. Background demographic data for each patient were recorded. Of 718 patients, 557 patients were female (77.6%). Six hundred sixty of 718 (91.8%) patients had adductor SD (AdSD), and 58 of 718 (8.1%) patients had abductor SD (AbSD). Average age of onset was 51 years. Of 718 patients, 378 (52.6%) had vocal tremor (VT); VT was present in 54.4% of AdSD patients and 32.1% of AbSD patients. Thirty-seven of 718 (5.2%) patients had other dystonias, including cervical dystonia (2.3%), blepharospasm (1.4%), limb dystonia (1.1%), and oromandibular dystonia (0.3%). A positive family history of SD was present in only 6 of 718 patients (0.8%) and of other dystonias in 11 of 718 patients (1.5%). Spasmodic dysphonia is a chronic and potentially disabling focal laryngeal dystonia. The Mayo Clinic Arizona SD experience compares to prior reports and reveals a female preponderance, onset in middle age, infrequent hereditary pattern, high co-occurrence of VT, and low co-occurrence of other dystonias. © The Author(s) 2015.

  10. Microwave joining of SiC

    Energy Technology Data Exchange (ETDEWEB)

    Silberglitt, R.; Ahmad, I. [FM Technologies, Inc., Fairfax, VA (United States); Black, W.M. [George Mason Univ., Fairfax, VA (United States)] [and others

    1995-05-01

    The purpose of this work is to optimize the properties of SiC-SiC joints made using microwave energy. The current focus is on optimization of time-temperature profiles, production of SiC from chemical precursors, and design of new applicators for joining of long tubes.

  11. Joining of SiCf/SiC composites for thermonuclear fusion reactors

    International Nuclear Information System (INIS)

    Ferraris, M.; Badini, C.; Montorsi, M.; Appendino, P.; Scholz, H.W.

    1994-01-01

    Due to their favourable radiological behaviour, SiC f /SiC composites are promising structural materials for future use in fusion reactors. A problem to cope with is the joining of the ceramic composite material (CMC) to itself for more complex structures. Maintenance concepts for a reactor made of SiC f /SiC will demand a method of joining. The joining agents should comply with the low-activation approach of the base material. With the acceptable elements Si and Mg, sandwich structures of composite/metal/composite were prepared in Ar atmosphere at temperatures just above the melting points of the metals. Another promising route is the use of joining agents of boro-silicate glasses: their composition can be tailored to obtain softening temperatures of interest for fusion applications. The glassy joint can be easily ceramised to improve thermomechanical properties. The joining interfaces were investigated by SEM-EDS, XRD and mechanical tests. ((orig.))

  12. Why join the Staff Association

    CERN Multimedia

    Association du personnel

    2011-01-01

    Becoming a member of the Staff Association (SA) is above all a personal choice, showing that the joining person’s commitment and adherence to values such as solidarity, social cohesion, etc.In September, the SA launches a membership campaign to convince a maximum number to join, to inform, arouse interest and support. Posters, emails and individual contacts are part of the campaign programme, just like this editorial. As far as individual contacts are concerned, we ask you to give time and lend an ear to the delegates of your department in the Staff Council, who will approach you, in order to make an open and constructive discussion possible. Do not hesitate to ask questions and let them know your thoughts about the SA, as (constructive) criticism enables us to progress. The Staff Association and its role of collective representation The Staff Association, via its delegates, represents collectively all staff of the Organization before the Director-General and Member States. To do this, staff rep...

  13. Flexible Friction Stir Joining Technology

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lim, Yong Chae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mahoney, Murray [MegaStir Technologies LLC, Orem, UT (United States); Sanderson, Samuel [MegaStir Technologies LLC, Orem, UT (United States); Larsen, Steve [MegaStir Technologies LLC, Orem, UT (United States); Steel, Russel [MegaStir Technologies LLC, Orem, UT (United States); Fleck, Dale [MegaStir Technologies LLC, Orem, UT (United States); Fairchild, Doug P [ExxonMobil, Upstream Research Company (URC), Houston, TX (United States); Wasson, Andrew J [ExxonMobil, Upstream Research Company (URC), Houston, TX (United States); Babb, Jon [MegaStir Technologies LLC, Orem, UT (United States); Higgins, Paul [MegaStir Technologies LLC, Orem, UT (United States)

    2015-07-23

    Reported herein is the final report on a U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) project with industry cost-share that was jointly carried out by Oak Ridge National Laboratory (ORNL), ExxonMobil Upstream Research Company (ExxonMobil), and MegaStir Technologies (MegaStir). The project was aimed to advance the state of the art of friction stir welding (FSW) technology, a highly energy-efficient solid-state joining process, for field deployable, on-site fabrications of large, complex and thick-sectioned structures of high-performance and high-temperature materials. The technology innovations developed herein attempted to address two fundamental shortcomings of FSW: 1) the inability for on-site welding and 2) the inability to weld thick section steels, both of which have impeded widespread use of FSW in manufacturing. Through this work, major advance has been made toward transforming FSW technology from a “specialty” process to a mainstream materials joining technology to realize its pervasive energy, environmental, and economic benefits across industry.

  14. Mary as Mother in the Flores de Mayo in Poblacion, Oslob

    Directory of Open Access Journals (Sweden)

    Patricia Marion Y. Lopez

    2016-06-01

    Full Text Available The paper reflects on the meanings of the Flores de Mayo ritual as performed in a town on the southeastern coast of Cebu through the examination of Mary as a “semantically open” symbol. The essay illustrates how ideas about Mary are constructed through the discourse of the Church and are in turn, reinforced through a Church-instituted and regulated ritual. An analysis of selected elements of the ritual however, reveals that the symbol of Mary has the potential to hold “other” kinds of meanings that slip in between “official” and “unofficial” discourses, highlighting how Mary continues to be a negotiated field between church authorities and the popular faithful.

  15. Development of reconstitution method for surveillance specimens using surface activated joining

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Terumi; Kaihara, Shoichiro; Yoshida, Kazuo; Sato, Akira [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Onizawa, Kunio; Nishiyama, Yutaka; Fukaya, Kiyoshi; Suzuki, Masahide

    1996-03-01

    Evaluation of embrittlement of reactor vessel steel due to irradiation requires surveillance tests. However, many surveillance specimens are necessary for nuclear plants life extension. Therefore, a specimen reconstitution technique has become important to provide the many specimens for continued surveillance. A surface activated joining (SAJ) method has been developed to join various materials together at low temperatures with little deformation, and is useful to bond irradiated specimens. To assess the validity of this method, Charpy impact tests were carried out, and the characteristics caused by heating during joining were measured. The test results showed the Charpy impact values were almost the same as base materials, and surface activated joining reduced heat affected zone to less than 2 mm. (author).

  16. Comparative analysis of the practice of China and Russia joining the WTO

    Directory of Open Access Journals (Sweden)

    Anastasia Sergeyevna Loginova

    2015-09-01

    Full Text Available Objective to examine the positive and negative experience of China39s joining the World Trade Organization WTO that joined it on terms similar to the Russian ones for the best understanding of the advantages and disadvantages of joining and building the appropriate policy. Methods the objective of the work has been achieved through the application of both general and specific scientific methods. In particular the analysis and synthesis allowed to study the social and economic context of the state in the framework of joining the WTO the consequences of such membership and to identify the key areas for improvement of this step for Russia. Statistical techniques were used in the process of gathering information about the key economic indicators. The fundamental method was comparativelegal which made it possible to draw parallels in joining the WTO by various states. Results basing on the measures taken by China both before and after joining the WTO as well as evaluation of their implication the conclusion was made about its successful experience. The actions before joining were very effective. In particular they are applicable to the fields of agriculture automotive industry investment policy etc. The measures of nonaddress subsidizing maintaining the socioeconomic stability in the country the export orientation of the economy along with functioning of special economic zones with joint ventures are in the authors39 opinion constructive actions for Russiarsquos adaptation to the WTO. Scientific novelty for the first time the thesis is put forward about the similarity of the Russia and China conditions when joining the WTO. The analysis is made of the complex measures preceding and following the joining. The necessity is grounded of reflecting the China39s positive and negative experiences in the Russian policy. Practical significance the main provisions and conclusions can be used in the research activity in addressing the issues of Russiarsquos

  17. Clinical aspects of the Mayo/IBM PACS project

    Science.gov (United States)

    Forbes, Glenn S.; Morin, Richard L.; Pavlicek, William

    1991-07-01

    A joint project between Mayo Clinic and IBM to develop a picture archival and communications system has been under development for three years. This project began as a potential solution to a pressing archival problem in magnetic resonance imaging. The project has grown to encompass a much larger sphere of activity including workstations, image retrieval, and report archival. This report focuses on the clinical aspects involved in the design, development, and implementation of such a system. In particular, emphasis is placed on the clinical impact of the system both inside and outside of the radiology department. The primary concerns have centered on fidelity of archival data, ease of use, and diagnostic efficacy. The project to date has been limited to neuroradiology practice. This group consists of nine staff radiologists and fellows. Administrative policy decisions regarding the accessibility and available of digital data in the clinical environment have been much more difficult and complex than originally conceived. Based on the observations thus far, the authors believe the system will become a useful and valuable adjunct to clinical practice of radiology.

  18. Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins

    Science.gov (United States)

    Conte, Romina; Buhl, Johannes; Ambrogio, Giuseppina; Bambach, Markus

    2018-05-01

    The present contribution proposes a new approach for joining sheet metal and fiber reinforced composites. The joining process draws upon a Friction Stir Forming (FSF) process, which is performed on the metal sheet to produce slender pins. These pins are used to pierce through the composite. Joining is complete by forming a locking head out of the part if the pin sticks out of the composite. Pins of different diameters and lengths were produced from EN AW-1050 material, which were joined to glass fiber reinforced polyamide-6. The strength of the joint has been experimentally tested in order to understand the effect of the process temperature on the pins strength and therefore on the joining. The results demonstrate the feasibility of this new technique, which uses no excess material.

  19. Los movimientos sociales en la transición democrática. El caso de las Madres de Plaza de Mayo: sentimiento y discurso

    Directory of Open Access Journals (Sweden)

    Martín D'ALESSANDRO

    2009-11-01

    Full Text Available RESUMEN: El presente artículo hace un repaso por el surgimiento y consolidación de Madres de Plaza de Mayo como movimiento social que inició sus actividades cuestionando la lucha antisubversiva emprendida por la dictadura militar argentina. Plantea además como este movimiento ha sufrido una radicalización de su discurso en la época de la transición a la democracia, cuando se desarrolla el enjuiciamiento de las Juntas Militares, y a partir de ese momento deciden enfrentarse al "sistema burgués". El discurso de Madres de Plaza de Mayo es inicialmente ético y moral para posteriormente adquirir matices de izquierda.ABSTRACT: This article analyzes the emergence and consolidation of the "Madres de Plaza de Mayo" as a social movement which initiated its action questioning the repressive policies led by the Argentine military dictatorship. It shows how the "Madres" undertook a radicalization of its discourse during the democratic transition, as the military "Juntas" were tried by Argentine courts. At this moment, the "Madres" dcided to struggle against the "bourgeois system." The discourse of the Madres was initially ethical and moral, and it became later left wing oriented.

  20. Joining of parts via magnetic heating of metal aluminum powders

    Science.gov (United States)

    Baker, Ian

    2013-05-21

    A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

  1. Salida de campo a Etang de Fournelet (Francia) el 1 de mayo de 1954

    OpenAIRE

    Valverde Gómez, José Antonio, 1926-2003

    2008-01-01

    Salida de campo a Etang de Fournelet, seguramente cerca a la reserva natural de La Camarga, en el delta del río Ródano (Provenza), el 1 de mayo de 1954, de la que se anotaron observaciones sobre las siguientes aves: Actitis hypoleucos (Andarríos chico, llamado Actynioides hypoleucus por el autor), Circus aeruginosus (Aguilucho lagunero occidental), Himantopus himantopus (Cigüeñuela común), Motacilla flava (Lavandera boyera), Saxicola rubetra (Tarabilla norteña), Sylvia conspicillata (Curruca ...

  2. Recent progress in micro and nano-joining

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Y; Hu, A; Khan, M I; Wu, W; Tam, B; Yavuz, M [Centre for Advanced Materials Joining Department of Mechanical and Mechatronics Engineering, University of Waterloo 200 University Avenue West, Waterloo, N2L 3G1 (Canada)], E-mail: nzhou@uwaterloo.ca

    2009-05-01

    Micro and nano-joining has been identified as a key enabling technology in the construction of micromechanical and microelectronic devices. The current article reviews recent progress in micro and nano-joining. In particular, laser micro-welding (LMW) of crossed 316 LVM stainless steel (SS) wire was compared to conventional resistance micro-welding (RMW) and was successfully employed in welding a Pt-Ir /SS dissimilar combination. Welding of Au nanoparticles was realized using femtosecond laser irradiation and its application in the surface enhanced Raman spectroscopy was investigated. Brazing between carbon nanotube (CNT) bundles and Ni electrodes was attained in vacuum, resulting in the development of a novel CNT filament of incandescent lamps.

  3. Performance of electro-plated and joined components for divertor application

    International Nuclear Information System (INIS)

    Krauss, Wolfgang; Lorenz, Julia; Konys, Jürgen

    2013-01-01

    Highlights: • Active interlayers of Ni and Pd were electroplated on W to assist joining. • Demonstrator types of W-steel and W–W joints were successfully fabricated. • Diffusion processes increase operation temperature above brazing temperature. • Ni electro-plating is less sensitive to variation of deposition parameters than Pd. • Shear tests showed values in resistance comparable to those of commercial fillers. -- Abstract: A general challenge in divertor development, independently of design type and cooling medium water or helium, is the reliable and adapted joining of components. Depending on the design variants, the characteristics of the joints will be focused on functional or structural behavior to guarantee e.g. good thermal conductivity and sufficient mechanical strength. All variants will have in common that tungsten is the plasma facing material. Thus, material combinations to be joined will range from Cu base over steel to tungsten. Especially tungsten shows lacks in adapted joining due to its metallurgical behavior ranging from immiscibility over bad wetting up to brittle intermetallic phase formation. Joining assisted by electro-chemical deposition of functional and filler layers showed that encouraging progress was achieved in wetting applying nickel interlayers. Nickel proved to be a good reference material but alternative elements (e.g. Pd, Fe) may be more attractive in fusion to manufacture suitable joints. Replacing of Ni as activator element by Pd for W/W or W/steel joints was achieved and joining with Cu-filler was successfully performed. Manufactured joints were characterized applying metallurgical testing and SEM/EDX analyses demonstrating the applicability of Pd activator. First shear tests showed that the joints exhibit mechanical stability sufficient for technical application

  4. Radon in dwellings the national radon survey Galway and Mayo

    International Nuclear Information System (INIS)

    McGarry, A.T.; Fennell, S.G.; Mackin, G.M.; Madden, J.S.; O'Colmain, M.

    1999-07-01

    This report presents the results of the final phase of the National Radon Survey carried out by the Radiological Protection Institute of Ireland. The counties included in this phase are Galway and Mayo. The average radon concentrations for the houses measured in these counties were 112 Bq/m 3 and 100 Bq/m 3 , respectively. The measurement data were grouped on the basis of the 10 km grid squares of the Irish National Grid System and used to predict the percentage of dwellings in each grid square which exceeds the Reference Level of 200 Bq/m 3 . Grid squares where this percentage is predicted to be 10% or higher are designated High Radon Areas. The health effects of exposure to high radon levels are discussed and recommendations are made regarding both new and existing dwellings. (author)

  5. Cohesive delamination and frictional contact on joining surface via XFEM

    Directory of Open Access Journals (Sweden)

    Francesco Parrinello

    2018-02-01

    Full Text Available In the present paper, the complex mechanical behaviour of the surfaces joining two differentbodies is analysed by a cohesive-frictional interface constitutive model. The kinematical behaviouris characterized by the presence of discontinuous displacement fields, that take place at the internalconnecting surfaces, both in the fully cohesive phase and in the delamination one. Generally, in order tocatch discontinuous displacement fields, internal connecting surfaces (adhesive layers are modelled bymeans of interface elements, which connect, node by node, the meshes of the joined bodies, requiringthe mesh to be conforming to the geometry of the single bodies and to the relevant connecting surface.In the present paper, the Extended Finite Element Method (XFEM is employed to model, both fromthe geometrical and from the kinematical point of view, the whole domain, including the connectedbodies and the joining surface. The joining surface is not discretized by specific finite elements, butit is defined as an internal discontinuity surface, whose spatial position inside the mesh is analyticallydefined. The proposed approach is developed for two-dimensional composite domains, formed by twoor more material portions joined together by means of a zero thickness adhesive layer. The numericalresults obtained with the proposed approach are compared with the results of the classical interfacefinite element approach. Some examples of delamination and frictional contact are proposed withlinear, circular and curvilinear adhesive layer.

  6. Fastening, coupling and joining technique between diaspora and irredenta

    Science.gov (United States)

    Bauer, C.-O.

    1980-06-01

    The problem of eliminating the present divergence and shattering (diaspora) in the treatment of problems of the fastening, coupling, and joining technique on different technical branches is examined. It is shown that by an appropriate independence the fastening, coupling and joining techniques can recognize and consequently utilize the numerous performance reserves which are concealed by the present organization and action due to the lack of systematically tended works.

  7. Environmentally friendly joining of tubes by their ends

    DEFF Research Database (Denmark)

    Silva, Carlos M.A.; Nielsen, Chris Valentin; Alves, Luis M.

    2015-01-01

    This paper proposes an environmentally friendly joining process for connecting tubes by their ends that has the potential to replace current solutions based on fastened, crimped, welded, brazed or adhesive bonded joints. The process is based on a new type of tubular lap joint produced by local...... of deformation and the process feasibility window, and destructive testing to establish the working limits of tubular lap joints under different type of loading conditions. Results demonstrate that the proposed joining process is a flexible and cost-effective technology for connecting tubes by their ends...

  8. Globalising Service-Learning in the Social Sciences

    Science.gov (United States)

    Limoncelli, Stephanie A.

    2017-01-01

    The increasing internationalisation of social science curricula in undergraduate education along with the growth of service-learning has provided new opportunities to join the two. This article offers a refection and discussion of service-learning with placements in international nongovernmental organisations (INGOs), drawing from its application…

  9. The Prince Edward Island-Mayo Clinic connection: Malcolm B. Dockerty and Lewis B. Woolner.

    Science.gov (United States)

    Wright, James R

    2014-03-01

    Malcolm B. Dockerty and Lewis B. Woolner, 2 preeminent mid-20th-century surgical pathologists, spent their entire careers at the Mayo Clinic. Both were raised in poverty on potato farms only 49 miles apart in Canada's smallest province (Prince Edward Island); both were educated in 1-room schools and graduated as gold medalists from Prince Edward Island's only college and then from Maritime Canada's only medical school; both then trained at the Mayo Clinic. To explore the lives and accomplishments of these 2 important surgical pathologists. Standard historiographic methods were used to explore primary and secondary historical sources. Both became world-renowned general surgical pathologists, one developing subspecialty expertise in gynecologic pathology and the other in cytopathology, pulmonary pathology, and thyroid/parathyroid pathology. Both were prolific authors with h-indices higher than 40, and between them, they published more than 750 peer-reviewed papers and book chapters. As educators, they trained hundreds of pathology and surgery residents/fellows who disseminated their knowledge around the world. Both were fascinated by poetry from childhood and could quote the classics from memory. One wrote poetry throughout his entire life and even used it to teach pathology and serve as his memoir; the other strongly preferred the classics and in jest called his colleague "a (minor) poet." Both received postretirement honorary doctorates from their alma maters. Dockerty died in 1987; Woolner celebrates his 100th birthday on November 17, 2013. Every pathologist should know of these 2 pioneering surgical pathologists.

  10. The mechanism of non-homologous end-joining: a synopsis of synapsis.

    Science.gov (United States)

    Weterings, Eric; van Gent, Dik C

    2004-11-02

    Repair of DNA double-strand breaks (DSBs) by non-homologous end-joining (NHEJ) is required for resistance to genotoxic agents, such as ionizing radiation, but also for proper development of the vertebrate immune system. Much progress has been made in identifying the factors that are involved in this repair pathway. We are now entering the phase in which we begin to understand basic concepts of the reaction mechanism and regulation of non-homologous end-joining. This review concentrates on novel insights into damage recognition and subsequent tethering, processing and joining of DNA ends.

  11. An Adaptive Genetic Algorithm with Dynamic Population Size for Optimizing Join Queries

    OpenAIRE

    Vellev, Stoyan

    2008-01-01

    The problem of finding the optimal join ordering executing a query to a relational database management system is a combinatorial optimization problem, which makes deterministic exhaustive solution search unacceptable for queries with a great number of joined relations. In this work an adaptive genetic algorithm with dynamic population size is proposed for optimizing large join queries. The performance of the algorithm is compared with that of several classical non-determinis...

  12. Five Performance Enhancements for Hybrid Hash Join

    National Research Council Canada - National Science Library

    Graefe, Goetz

    1992-01-01

    .... We discuss five performance enhancements for hybrid hash join algorithms, namely data compression, large cluster sizes and multi-level recursion, role reversal of build and probe inputs, histogram...

  13. Rhenium Mechanical Properties and Joining Technology

    Science.gov (United States)

    Reed, Brian D.; Biaglow, James A.

    1996-01-01

    Iridium-coated rhenium (Ir/Re) provides thermal margin for high performance and long life radiation cooled rockets. Two issues that have arisen in the development of flight Ir/Re engines are the sparsity of rhenium (Re) mechanical property data (particularly at high temperatures) required for engineering design, and the inability to directly electron beam weld Re chambers to C103 nozzle skirts. To address these issues, a Re mechanical property database is being established and techniques for creating Re/C103 transition joints are being investigated. This paper discusses the tensile testing results of powder metallurgy Re samples at temperatures from 1370 to 2090 C. Also discussed is the evaluation of Re/C103 transition pieces joined by both, explosive and diffusion bonding. Finally, the evaluation of full size Re transition pieces, joined by inertia welding, as well as explosive and diffusion bonding, is detailed.

  14. Rethinking learning networks collaborative possibilities for a Deleuzian century

    CERN Document Server

    Kamp, Annelies

    2013-01-01

    In the face of today's complex policy challenges, various forms of 'joining-up' - networking, collaborating, partnering - have become key responses. However, institutions often fail to take advantage of the full benefits that joining-up offers. In this book, the author draws on ethnographic research into learning networks in post compulsory education and training in the state of Victoria, Australia, to explore why this might be the case and presents an argument for rethinking how joining-up works in practice. Throughout the book, Deleuzian concepts are engaged to forge a 'little complicating m

  15. Infrared transient-liquid-phase joining of SCS-6/{beta}21S titanium matrix composite

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States). Materials Processing Group; Blue, R.A.; Lin, R.Y. [Univ. of Cincinnati, OH (United States). Dept. of Materials Science and Engineering

    1996-02-01

    Fiber-reinforced titanium matrix composites (TMCs) are among the advanced materials being considered for use in the aerospace industry due to their light weight, high strength, and high modulus. A rapid infrared joining process has been developed for the joining of composites and advanced materials. Rapid infrared joining has been shown not to have many of the problems associated with conventional joining methods. Two models were utilized to predict the joint evolution and fiber reaction zone growth. TMC, 16-ply SCS-6/{beta}21S, has been successfully joined with total processing times of under 2 min utilizing the rapid infrared joining technique. The process utilizes a 50 C/sec ramping rate, 17-{micro}m Ti-15Cu-15Ni wt % filler material between the faying surfaces; a joining temperature of 1,100 C; and 120 sec of time to join the composite material. Joint shear strength testing of the rapid infrared joints at temperatures as high as 800 C has revealed no joint failures. Also, due to the rapid cooling of the process, no poststabilization of the matrix material is necessary to prevent the formation of a brittle omega phase during subsequent use of the TMC at intermediate temperatures, 270 to 430 C, for up to 20 h.

  16. Why do people join trade unions?

    DEFF Research Database (Denmark)

    Toubøl, Jonas; Jensen, Carsten Strøby

    level on union recruitment, which is not done before. Workplace union density is taken to measure the strength of the workplace’s custom of being union member creating an instrumental incentive to join the union. Self-placement on a political left-right scale measures political attitude taken...

  17. Bootcamp EMMA MOOC Assessment for learning in practice

    NARCIS (Netherlands)

    Firssova, Olga; Brouns, Francis

    2016-01-01

    At the EDEN Conference an introduction to the EMMA platform will be combined with learning activities relevant to the topic of Formative Assessment. EDEN conference participants will have an opportunity to join the MOOC prior to the conference or at the conference. A range of learning activities

  18. Tungsten foil laminate for structural divertor applications - Joining of tungsten foils

    Science.gov (United States)

    Reiser, Jens; Rieth, Michael; Möslang, Anton; Dafferner, Bernhard; Hoffmann, Jan; Mrotzek, Tobias; Hoffmann, Andreas; Armstrong, D. E. J.; Yi, Xiaoou

    2013-05-01

    This paper is the fourth in our series on tungsten laminates. The aim of this paper is to discuss laminate synthesis, meaning the joining of tungsten foils. It is obvious that the properties of the tungsten laminate strongly depend on the combination of (i) interlayer and (ii) joining technology, as this combination defines (i) the condition of the tungsten foil after joining (as-received or recrystallised) as well as (ii) the characteristics of the interface between the tungsten foil and the interlayer (wettability or diffusion leading to a solid solution or the formation of intermetallics). From the example of tungsten laminates joined by brazing with (i) an eutectic silver copper brazing filler, (ii) copper, (iii) titanium, and (iv) zirconium, the microstructure will be discussed, with special focus on the interface. Based on our assumptions of the mechanism of the extraordinary ductility of tungsten foil we present three syntheses strategies and make recommendations for the synthesis of high temperature tungsten laminates.

  19. Aluminum and stainless steel tubes joined by simple ring and welding process

    Science.gov (United States)

    Townhill, A.

    1967-01-01

    Duranel ring is used to join aluminum and stainless steel tubing. Duranel is a bimetal made up of roll-bonded aluminum and stainless steel. This method of joining the tubing requires only two welding operations.

  20. Review of Adjuvant Radiochemotherapy for Resected Pancreatic Cancer and Results From Mayo Clinic for the 5th JUCTS Symposium

    International Nuclear Information System (INIS)

    Miller, Robert C.; Iott, Matthew J.; Corsini, Michele M.

    2009-01-01

    Purpose: To present an overview of Phase III trials in adjuvant therapy for pancreatic cancer and review outcomes at the Mayo Clinic after adjuvant radiochemotherapy (RT/CT) for resected pancreatic cancer. Methods and Materials: A literature review and a retrospective review of 472 patients who underwent an R0 resection for T1-3N0-1M0 invasive carcinoma of the pancreas from 1975 to 2005 at the Mayo Clinic, Rochester, MN. Patients with metastatic or unresectable disease at the time of surgery, positive surgical margins, or indolent tumors and those treated with intraoperative radiotherapy were excluded from the analysis. Median radiotherapy dose was 50.4Gy in 28 fractions, with 98% of patients receiving concurrent 5-fluorouracil- based chemotherapy. Results: Median follow-up was 2.7 years. Median overall survival (OS) was 1.8 years. Median OS after adjuvant RT/CT was 2.1 vs. 1.6 years for surgery alone (p = 0.001). The 2-y OS was 50% vs. 39%, and 5-y was 28% vs. 17% for patients receiving RT/CT vs. surgery alone. Univariate and multivariate analysis revealed that adverse prognostic factors were positive lymph nodes (risk ratio [RR] 1.3, p < 0.001) and high histologic grade (RR 1.2, p < 0.001). T3 tumor status was found significant on univariate analysis only (RR 1.1, p = 0.07). Conclusions: Results from recent clinical trials support the use of adjuvant chemotherapy in resected pancreatic cancer. The role of radiochemotherapy in adjuvant treatment of pancreatic cancer remains a topic of debate. Results from the Mayo Clinic suggest improved outcomes after the administration of adjuvant radiochemotherapy after a complete resection of invasive pancreatic malignancies.

  1. Utility of the Mayo-Portland adaptability inventory-4 for self-reported outcomes in a military sample with traumatic brain injury.

    Science.gov (United States)

    Kean, Jacob; Malec, James F; Cooper, Douglas B; Bowles, Amy O

    2013-12-01

    To investigate the psychometric properties of the Mayo-Portland Adaptability Inventory-4 (MPAI-4) obtained by self-report in a large sample of active duty military personnel with traumatic brain injury (TBI). Consecutive cohort who completed the MPAI-4 as a part of a larger battery of clinical outcome measures at the time of intake to an outpatient brain injury clinic. Medical center. Consecutively referred sample of active duty military personnel (N=404) who suffered predominantly mild (n=355), but also moderate (n=37) and severe (n=12), TBI. Not applicable. MPAI-4 RESULTS: Initial factor analysis suggested 2 salient dimensions. In subsequent analysis, the ratio of the first and second eigenvalues (6.84:1) and parallel analysis indicated sufficient unidimensionality in 26 retained items. Iterative Rasch analysis resulted in the rescaling of the measure and the removal of 5 additional items for poor fit. The items of the final 21-item Mayo-Portland Adaptability Inventory-military were locally independent, demonstrated monotonically increasing responses, adequately fit the item response model, and permitted the identification of nearly 5 statistically distinct levels of disability in the study population. Slight mistargeting of the population resulted in the global outcome, as measured by the Mayo-Portland Adaptability Inventory-military, tending to be less reflective of very mild levels of disability. These data collected in a relatively large sample of active duty service members with TBI provide insight into the ability of patients to self-report functional impairment and the distinct effects of military deployment on outcome, providing important guidance for the meaningful measurement of outcome in this population. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  2. Teens join the MoEDAL collaboration

    CERN Multimedia

    Stephanie Hills

    2013-01-01

    The principal investigator for any institute joining an experimental collaboration is generally a self-assured researcher with evident leadership skills and an in-depth knowledge of their subject gained over many years. Katherine Evans fits the brief in every respect, except that she is 17 years old and her research institute is the Langton Star Centre, based at the Simon Langton Grammar School for Boys. The school has just joined the MoEDAL experiment.   Teacher Becky Parker (left) with two students from the Simon Langton Grammar School for Boys in the MoEDAL experimental area. MoEDAL, the latest LHC experiment has detectors located close to the interaction point of the LHCb experiment. This new experiment is designed to search for the highly ionizing avatars of new physics at the LHC, specifically the magnetic monopole or dyon and other highly ionizing stable massive particles from a number of beyond-the-Standard-Model scenarios. MoEDAL was approved in 2010 and is due to start taking data i...

  3. Joining of thermoplastic substrates by microwaves

    Science.gov (United States)

    Paulauskas, Felix L.; Meek, Thomas T.

    1997-01-01

    A method for joining two or more items having surfaces of thermoplastic material includes the steps of depositing an electrically-conductive material upon the thermoplastic surface of at least one of the items, and then placing the other of the two items adjacent the one item so that the deposited material is in intimate contact with the surfaces of both the one and the other items. The deposited material and the thermoplastic surfaces contacted thereby are then exposed to microwave radiation so that the thermoplastic surfaces in contact with the deposited material melt, and then pressure is applied to the two items so that the melted thermoplastic surfaces fuse to one another. Upon discontinuance of the exposure to the microwave energy, and after permitting the thermoplastic surfaces to cool from the melted condition, the two items are joined together by the fused thermoplastic surfaces. The deposited material has a thickness which is preferably no greater than a skin depth, .delta..sub.s, which is related to the frequency of the microwave radiation and characteristics of the deposited material in accordance with an equation.

  4. Alternative end-joining pathway(s): bricolage at DNA breaks.

    Science.gov (United States)

    Frit, Philippe; Barboule, Nadia; Yuan, Ying; Gomez, Dennis; Calsou, Patrick

    2014-05-01

    To cope with DNA double strand break (DSB) genotoxicity, cells have evolved two main repair pathways: homologous recombination which uses homologous DNA sequences as repair templates, and non-homologous Ku-dependent end-joining involving direct sealing of DSB ends by DNA ligase IV (Lig4). During the last two decades a third player most commonly named alternative end-joining (A-EJ) has emerged, which is defined as any Ku- or Lig4-independent end-joining process. A-EJ increasingly appears as a highly error-prone bricolage on DSBs and despite expanding exploration, it still escapes full characterization. In the present review, we discuss the mechanism and regulation of A-EJ as well as its biological relevance under physiological and pathological situations, with a particular emphasis on chromosomal instability and cancer. Whether or not it is a genuine DSB repair pathway, A-EJ is emerging as an important cellular process and understanding A-EJ will certainly be a major challenge for the coming years. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

  5. The conversion to electronic hospital notes at Mayo Clinic. Overcoming barriers and challenges.

    Science.gov (United States)

    Andreen, Debra L; Dobie, Linda J; Jasperson, Jan C; Lucas, Thomas A; Wubbenhorst, Cathryn L

    2010-01-01

    This article describes the conversion to electronic hospital notes at a large, multi-specialty group practice: Mayo Clinic in Rochester, Minnesota. Because of the size of the institution and the barriers to the adoption of electronic notes, the process was a gradual one that took several years. Making a convincing case for change to institutional leaders and maintaining their support was crucial to success. Equally vital was the careful investigation of user requirements and the development of software features that allowed providers to complete their notes quickly in the fast-paced hospital environment. Care providers discovered the value of having immediate access to legible hospital notes throughout the campus and from remote locations.

  6. Reviving a Community, Modernizing an Industry: Ireland's Furniture College.

    Science.gov (United States)

    Regional Technology Strategies, Inc., Carrboro, NC.

    Connemara, a rural region in Ireland, is characterized by high unemployment, high emigration, poor infrastructure, inadequate public services, and a low rate of transfer to third-level education. To address the situation, the Galway-Mayo Institute of Technology (GMIT), joined forces with Connemara West (a community-owned development organization…

  7. Joining of metals to structural ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Sistiaga, J M; Salvador, J M

    1988-01-01

    A wide review is made on metal-ceramics joining by brazing, mainly by active metal containing brazing filler alloys and solid state welding that is diffusion welding and hot isostatic pressure (HIP). Both the basic aspects of the processes and the mechanisms involved are considsered. At last, different joint testing ands evaluation procedures are presented. (Author)

  8. Joining of metals to structural ceramics

    International Nuclear Information System (INIS)

    Sistiaga, J.M.; Salvador, J.M.

    1988-01-01

    A wide review is made on metal-ceramics joining by brazing, mainly by active metal containing brazing filler alloys and solid state welding that is diffusion welding and hot isostatic pressure (HIP). Both the basic aspects of the processes and the mechanisms involved are considered. At last, different joint testing and evaluation procedures are presented. (Author)

  9. History-based joins : semantics, soundness and implementation

    NARCIS (Netherlands)

    Hee, van K.M.; Oanea, O.I.; Serebrenik, A.; Sidorova, N.; Voorhoeve, M.; Dustdar, S.; Fiadeiro, J.L.; Sheth, A.

    2006-01-01

    In this paper we study the use of case history for control structures in workflow processes. In particular we introduce a historydependent join. History dependent control offers much more modeling power than classical control structures and it solves several semantical problems of industrial

  10. Tungsten foil laminate for structural divertor applications – Joining of tungsten foils

    Energy Technology Data Exchange (ETDEWEB)

    Reiser, Jens, E-mail: jens.reiser@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-AWP) (Germany); Rieth, Michael; Möslang, Anton; Dafferner, Bernhard; Hoffmann, Jan [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-AWP) (Germany); Mrotzek, Tobias; Hoffmann, Andreas [PLANSEE SE, Reutte (Austria); Armstrong, D.E.J.; Yi, Xiaoou [University of Oxford, Department of Materials (United Kingdom)

    2013-05-15

    This paper is the fourth in our series on tungsten laminates. The aim of this paper is to discuss laminate synthesis, meaning the joining of tungsten foils. It is obvious that the properties of the tungsten laminate strongly depend on the combination of (i) interlayer and (ii) joining technology, as this combination defines (i) the condition of the tungsten foil after joining (as-received or recrystallised) as well as (ii) the characteristics of the interface between the tungsten foil and the interlayer (wettability or diffusion leading to a solid solution or the formation of intermetallics). From the example of tungsten laminates joined by brazing with (i) an eutectic silver copper brazing filler, (ii) copper, (iii) titanium, and (iv) zirconium, the microstructure will be discussed, with special focus on the interface. Based on our assumptions of the mechanism of the extraordinary ductility of tungsten foil we present three syntheses strategies and make recommendations for the synthesis of high temperature tungsten laminates.

  11. Machining, joining and modifications of advanced materials

    CERN Document Server

    Altenbach, Holm

    2016-01-01

    This book presents the latest advances in mechanical and materials engineering applied to the machining, joining and modification of modern engineering materials. The contributions cover the classical fields of casting, forming and injection moulding as representative manufacturing methods, whereas additive manufacturing methods (rapid prototyping and laser sintering) are treated as more innovative and recent technologies that are paving the way for the manufacturing of shapes and features that traditional methods are unable to deliver. The book also explores water jet cutting as an innovative cutting technology that avoids the heat build-up typical of classical mechanical cutting. It introduces readers to laser cutting as an alternative technology for the separation of materials, and to classical bonding and friction stir welding approaches in the context of joining technologies. In many cases, forming and machining technologies require additional post-treatment to achieve the required level of surface quali...

  12. Effect of Ti and Si interlayer materials on the joining of SiC ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yang Il; Park, Jung Hwan; Kim, Hyun Gil; Park, Dong Jun; Park, Jeong Yong; Kim, Weon Ju [LWR Fuel Technology Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-08-15

    SiC-based ceramic composites are currently being considered for use in fuel cladding tubes in light-water reactors. The joining of SiC ceramics in a hermetic seal is required for the development of ceramic-based fuel cladding tubes. In this study, SiC monoliths were diffusion bonded using a Ti foil interlayer and additional Si powder. In the joining process, a very low uniaxial pressure of ∼0.1 MPa was applied, so the process is applicable for joining thin-walled long tubes. The joining strength depended strongly on the type of SiC material. Reaction-bonded SiC (RB-SiC) showed a higher joining strength than sintered SiC because the diffusion reaction of Si was promoted in the former. The joining strength of sintered SiC was increased by the addition of Si at the Ti interlayer to play the role of the free Si in RB-SiC. The maximum joint strength obtained under torsional stress was ∼100 MPa. The joint interface consisted of TiSi{sub 2}, Ti{sub 3}SiC{sub 2}, and SiC phases formed by a diffusion reaction of Ti and Si.

  13. NASA/DARPA advanced communications technology satellite project for evaluation of telemedicine outreach using next-generation communications satellite technology: Mayo Foundation participation.

    Science.gov (United States)

    Gilbert, B K; Mitchell, M P; Bengali, A R; Khandheria, B K

    1999-08-01

    To describe the development of telemedicine capabilities-application of remote consultation and diagnostic techniques-and to evaluate the feasibility and practicality of such clinical outreach to rural and underserved communities with limited telecommunications infrastructures. In 1992, Mayo Foundation (Rochester, Minn, Jacksonville, Fla, and Scottsdale, Ariz), the National Aeronautics and Space Administration, and the Defense Advanced Research Projects Agency collaborated to create a complex network of fiberoptic landlines, video recording systems, satellite terminals, and specially developed data translators linking Mayo sites with other locations in the continental United States on an on-demand basis. The purpose was to transmit data via the asynchronous transfer mode (ATM) digital communications protocol over the Advanced Communications Technology Satellite. The links were intended to provide a conduit for transmission of data for patient-specific consultations between physicians, evaluation of medical imagery, and medical education for clinical staffs at remote sites. Low-data-rate (LDR) experiments went live late in 1993. Mayo Clinic Rochester successfully provided medical consultation and services to 2 small regional medical facilities. High-data-rate (HDR) experiments included studies of remote digital echocardiography, store-and-forward telemedicine, cardiac catheterization, and teleconsultation for congenital heart disease. These studies combined landline data transmission with use of the satellite. The complexity of the routing paths and network components, immaturity of available software, and inexperience with existing telecommunications caused significant study delays. These experiments demonstrated that next-generation satellite technology can provide batch and real-time imagery for telemedicine. The first-generation of the ATM and satellite network technology used in these experiments created several technical problems and inconveniences that should

  14. Activities Joining Learning Objectives to Assessments in Introductory Astronomy

    Science.gov (United States)

    Palen, Stacy E.; Larson, Ana M.

    2015-01-01

    In recent years, accreditation boards and other governing bodies have been pushing hard for explicit learning goals and quantitative measures of assessment for general education courses such as Astronomy 101. This added assessment burden can be problematic, especially for harried adjuncts teaching multiple courses at multiple institutions. It would be helpful to have a field-tested set of combined hands-on activities and assessment tools that help instructors meet these assessment requirements. The authors have produced just such a set. We have been using hands-on activities in our classrooms for more than 15 years. These activities require no special equipment or preparation and can be completed within an hour by most students working in groups of two or three. The sections of each activity are arranged in steps, guiding the students from initial knowledge-level questions or practice to a final evaluation or synthesis of what they have just accomplished. Students thus get practice thinking at higher cognitive levels. A recent addition to these activities is the inclusion of formalized learning objectives and accompanying pre- and post-activity questions. The pre-activity questions address common misconceptions, relate familiar analogous terrestrial examples to the activity, and act as a brief refresher meta-concepts like scale factors, measurements, and basic mathematics review. The post-activity questions review the most important concepts introduced in the activity. We present a number of examples as well as a summary as to how we have initiated their use in a large lecture setting of 300 students, in smaller classrooms of 15 students, and in a community college online course.

  15. Joining of HHF materials applying electroplating technology

    Energy Technology Data Exchange (ETDEWEB)

    Krauss, Wolfgang, E-mail: wolfgang.krauss@kit.edu; Lorenz, Julia; Konys, Jürgen

    2014-10-15

    Highlights: • Electroplating of fillers is industrially relevant for brazing in fusion. • Interlayers (Ni or Pd) improve adherence and reduce failure risks. • Tungsten and Eurofer joints successfully fabricated by electroplating. • Mechanical and non-destructive testing integrated into qualification. • Shear strength of W joints comparable with conventionally brazed steel. - Abstract: Tungsten will be used as armor material for blanket shielding and is designated as high heat flux material for divertors, beyond application of improved W composite alloys as structural material. Independent from design (water- or helium-cooled), a successful development is inherently correlated with joining of tungsten with functional components. Depending on the design variants, the fabricated joints have to guarantee specific functional or structural properties, e.g., good thermal conductivity or mechanical load transmission. Tungsten shows lacks in adapted joining due to its metallurgical behavior ranging from immiscibility over bad wetting to brittle intermetallic phase formation. Electroplating has shown to overcome such drawbacks and that homogeneous functional (e.g., Ni or Pd) and filler (e.g., Cu) layers can be deposited. In this paper the progress achieved in development of electroplating processes for joining W to W or steel to steel will be shown. The main focus will be the characterization of the processed joints applying metallurgical investigations including SEM/EDX analyses and non-destructive testing. The mechanical stability of the produced joints is demonstrated by presenting recent shear test data. The W–W joints failed due to cracking in W, whereas the steel–steel joints cracked in the brazing zone at about 200 N/mm{sup 2} load.

  16. News Release: USDA Joins Fair Food Network, State and Local Partners to

    Science.gov (United States)

    vitamin C, calcium, and iron. The Food Bank of Eastern Michigan in Flint is distributing those USDA Foods Joins Fair Food Network, State and Local Partners to Promote Nutrition Resources for Lead-Affected Flint Residents News Release: USDA Joins Fair Food Network, State and Local Partners to Promote Nutrition

  17. Mastery learning: it is time for medical education to join the 21st century.

    Science.gov (United States)

    McGaghie, William C

    2015-11-01

    Clinical medical education in the 21st century is grounded in a 19th-century model that relies on longitudinal exposure to patients as the curriculum focus. The assumption is that medical students and postgraduate residents will learn from experience, that vicarious or direct involvement in patient care is the best teacher. The weight of evidence shows, however, that results from such traditional clinical education are uneven at best. Educational inertia endorsed until recently by medical school accreditation policies has maintained the clinical medical education status quo for decades.Mastery learning is a new paradigm for medical education. Basic principles of mastery learning are that educational excellence is expected and can be achieved by all learners and that little or no variation in measured outcomes will result. This Commentary describes the origins of mastery learning and presents its essential features. The Commentary then introduces the eight reports that comprise the mastery learning cluster for this issue of Academic Medicine. The reports are intended to help medical educators recognize advantages of the mastery model and begin to implement mastery learning at their own institutions. The Commentary concludes with brief statements about future directions for mastery learning program development and research in medical education.

  18. Five reasons to join local Chamber of Commerce and Industry

    OpenAIRE

    Verbovskii, Vladislav; Kosov, Vladimir; Chaika (Chayka), Yuliya Aleksandrovna

    2016-01-01

    The article describes five useful things that Chamber of Commerce and Industry membership may give to business owners after joining it. These things are the reasons to become a part of business community formed by Chambers of Commerce that may be considered by those business owner who are deciding whether to join Chamber of Commerce or not. Mentioned reasons are given with examples related to Tomsk Chamber of Commerce and Industry and are relevant to any Chamber of Commerce located in Russian...

  19. The study on joining carbon/carbon composites using Ti–Ni–Si compound

    International Nuclear Information System (INIS)

    Wang Jie; Li Kezhi; Song Xinrui; Guo Lingjun; Li Wei; Li Zhaoqian

    2012-01-01

    Highlights: ► First study to join C/C composites using Ti–Ni–Si compound. ► The average joint shear strength can reach up to 23.58 MPa. ► Strong joints are apt to fracture through interlayer, interfaces and C/C matrix. ► Phase compositions in joints are varied with increasing joining temperature. - Abstract: 2D carbon/carbon (C/C) composites have been successfully joined by partial transient liquid phase (PTLP) bonding using Ti–Ni–Si compound as interlayer. The shear strengths of C/C joints were found to be affected observably by joining temperature, joining pressure and holding time. The optimum process parameters were determined at 1150 °C, 30 MPa, 45 min, and the maximum joint shear strength was obtained under this optimum process condition with an average value of 23.58 MPa. Microstructures and compositions of joints were analyzed by scanning electronic microscopy (SEM), energy disperse spectroscopy (EDS) and X-ray diffraction (XRD). Results showed that element interdiffusions and chemical reactions took place in the joining zone and various compounds including Ni 4 Si 7 Ti 4 , TiSi 2 , SiC and TiC were produced, by which compact interlayer and strong interface were formed in C/C joints. The shear morphology indicated there were three fracture modes in C/C joints and the fracture was apt to occur through interlayer, interface and C/C matrix in strong joints. Thermal shock resistance experimental results revealed that joint shear strength has a rapid drop after 5 thermal cycles and then reduces gradually with the increase of thermal cycles between room temperature and 1000 °C.

  20. Evaluation of the feasibility of joining titanium alloy to heavymet tungsten alloy

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-07

    Information is presented on a program to select and evaluate methods of brazing and/or explosively welding Ti-6Al-4V titanium alloy to Heavymet, a tungsten-base metal containing up to about 20% alloying elements (nickel, copper, etc.) to improve its ductility and other mechanical properties. Designs permitting the reliable production of joints between these base metals were of interest too. While this investigation was primarily concerned with an engineering study of the problems associated with joining these base metals in the required configuration, limited experimental studies were conducted also. The joining methods are reviewed individually. Recommendations for developing a viable titanium-tungsten joining procedure are discussed.

  1. Evaluation of the feasibility of joining titanium alloy to heavymet tungsten alloy

    International Nuclear Information System (INIS)

    1978-01-01

    Information is presented on a program to select and evaluate methods of brazing and/or explosively welding Ti-6Al-4V titanium alloy to Heavymet, a tungsten-base metal containing up to about 20% alloying elements (nickel, copper, etc.) to improve its ductility and other mechanical properties. Designs permitting the reliable production of joints between these base metals were of interest too. While this investigation was primarily concerned with an engineering study of the problems associated with joining these base metals in the required configuration, limited experimental studies were conducted also. The joining methods are reviewed individually. Recommendations for developing a viable titanium-tungsten joining procedure are discussed

  2. Numerical modelling in friction lap joining of aluminium alloy and carbon-fiber-reinforced-plastic sheets

    Science.gov (United States)

    Das, A.; Bang, H. S.; Bang, H. S.

    2018-05-01

    Multi-material combinations of aluminium alloy and carbon-fiber-reinforced-plastics (CFRP) have gained attention in automotive and aerospace industries to enhance fuel efficiency and strength-to-weight ratio of components. Various limitations of laser beam welding, adhesive bonding and mechanical fasteners make these processes inefficient to join metal and CFRP sheets. Friction lap joining is an alternative choice for the same. Comprehensive studies in friction lap joining of aluminium to CFRP sheets are essential and scare in the literature. The present work reports a combined theoretical and experimental study in joining of AA5052 and CFRP sheets using friction lap joining process. A three-dimensional finite element based heat transfer model is developed to compute the temperature fields and thermal cycles. The computed results are validated extensively with the corresponding experimentally measured results.

  3. Thermally joining and/or coating or thermally separating the workpieces having heat-sensitive coating, comprises restoring coating by thermally coating the coating material after thermally joining and/or coating or thermally separating

    OpenAIRE

    Riedel, Frank; Winkelmann, Ralf; Puschmann, Markus

    2011-01-01

    The method for thermally joining and/or coating or thermally separating the workpieces (1), which have a heat-sensitive coating (2), comprises restoring the coating by thermally coating a coating material (3) after thermally joining and/or coating or thermally separating the workpieces. A part of the thermal energy introduced in the workpiece for joining and/or coating or separating or in the workpieces is used for thermally coating the coating material. Two workpieces are welded or soldered ...

  4. Welding and joining of single crystals of BCC refractory metals

    International Nuclear Information System (INIS)

    Hiraoka, Yutaka; Fujii, Tadayuki

    1989-01-01

    Welding and joining is one of key technologies for the wider utilizations of a material. In the present work, the applicability of welding and joining for a single crystal of BCC refractory metal was investigated. Electron-beam welding and tungsten-inert-gas welding by a melt-run technique, and high-temperature brazing by using brazing metals such as Mo-40%Ru alloy, vanadium or platinum were conducted for molybdenum single crystal which had been prepared by means of secondary recrystallization. 12 refs.,12 figs., 2 tabs. (Author)

  5. Glass-ceramic joint and method of joining

    Science.gov (United States)

    Meinhardt, Kerry D [Richland, WA; Vienna, John D [West Richland, WA; Armstrong, Timothy R [Clinton, TN; Pederson, Larry R [Kennewick, WA

    2003-03-18

    The present invention is a glass-ceramic material and method of making useful for joining a solid ceramic component and at least one other solid component. The material is a blend of M1-M2-M3, wherein M1 is BaO, SrO, CaO, MgO, or combinations thereof, M2 is Al.sub.2 O.sub.3, present in the blend in an amount from 2 to 15 mol %, M3 is SiO.sub.2 with up to 50 mol % B.sub.2 O.sub.3 that substantially matches a coefficient of thermal expansion of the solid electrolyte. According to the present invention, a series of glass ceramics in the M1-Al.sub.2 O.sub.3 -M3 system can be used to join or seal both tubular and planar solid oxide fuel cells, oxygen electrolyzers, and membrane reactors for the production of syngas, commodity chemicals and other products.

  6. Joining Dental Ceramic Layers With Glass

    Science.gov (United States)

    Saied, MA; Lloyd, IK; Haller, WK; Lawn, BR

    2011-01-01

    Objective Test the hypothesis that glass-bonding of free-form veneer and core ceramic layers can produce robust interfaces, chemically durable and aesthetic in appearance and, above all, resistant to delamination. Methods Layers of independently produced porcelains (NobelRondo™ Press porcelain, Nobel BioCare AB and Sagkura Interaction porcelain, Elephant Dental) and matching alumina or zirconia core ceramics (Procera alumina, Nobel BioCare AB, BioZyram yttria stabilized tetragonal zirconia polycrystal, Cyrtina Dental) were joined with designed glasses, tailored to match thermal expansion coefficients of the components and free of toxic elements. Scanning electron microprobe analysis was used to characterize the chemistry of the joined interfaces, specifically to confirm interdiffusion of ions. Vickers indentations were used to drive controlled corner cracks into the glass interlayers to evaluate the toughness of the interfaces. Results The glass-bonded interfaces were found to have robust integrity relative to interfaces fused without glass, or those fused with a resin-based adhesive. Significance The structural integrity of the interfaces between porcelain veneers and alumina or zirconia cores is a critical factor in the longevity of all-ceramic dental crowns and fixed dental prostheses. PMID:21802131

  7. Study of international published experiences in joining copper and copper-alloys

    International Nuclear Information System (INIS)

    Dahlgren, Aa.

    1997-04-01

    This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified, i.e. it shall be demonstrated whether the procedure is capable of fulfilling specified requirements. 32 refs

  8. What happens during a Join? - Dissecting CPU and Memory Optimization Effects

    OpenAIRE

    Manegold, Stefan; Boncz, Peter; Kersten, Martin

    2000-01-01

    textabstractPerformance of modern hardware increasingly depends on proper utilization of both the memory cache hierarchy and parallel execution possibilities in todays super-scalar CPUs. Recent database research has demonstrated that database system performance severely suffers from poor utilization of these resources. In previous work, we presented join algorithms that strongly accelerate large equi-join by tuning the memory access pattern to match the characteristics of the memory cache sub...

  9. Performance, Cognitive Load, and Behaviour of Technology-Assisted English Listening Learning: From CALL to MALL

    Science.gov (United States)

    Chang, Chi-Cheng; Warden, Clyde A.; Liang, Chaoyun; Chou, Pao-Nan

    2018-01-01

    This study examines differences in English listening comprehension, cognitive load, and learning behaviour between outdoor ubiquitous learning and indoor computer-assisted learning. An experimental design, employing a pretest-posttest control group is employed. Randomly assigned foreign language university majors joined either the experimental…

  10. Joining of silicon carbide using interlayer with matching coefficient of thermal expansion

    International Nuclear Information System (INIS)

    Perham, T.

    1996-11-01

    The primary objective of this study is to develop a technique for joining a commercially available Silicon Carbide that gives good room temperature strength and the potential for good high temperature strength. One secondary objective is that the joining technique be adaptable to SiC f /SiC composites and/or Nickel based superalloys, and another secondary objective is that the materials provide good neutron irradiation resistance and low activation for potential application inside nuclear fusion reactors. The joining techniques studied here are: (1) reaction bonding with Al-Si/Si/SiC/C; (2) reaction/infiltration with calcium aluminum silicate; (3) ion exchange mechanism to form calcium hexaluminate (a refractory cement); and (4) oxide frit brazing with cordierite

  11. Calculation of force and time of contact formation at diffusion metal joining

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanov, V E [Tsentral' nyj Nauchno-Issledovatel' skij Inst. Chernoj Metallurgii, Moscow (USSR); Grushevskij, A V [Moskovskij Stankoinstrumental' nyj Inst., Moscow (USSR); Surovtsev, A P

    1989-03-01

    An analytical model of contact for mation at diffusion joining is suggested. It is based on the introduction of a rough surface with roughnesses in the form of absolutely rigid spherical segnunts into a smooth laminar body. Mathematical expressions, permitting to calculate maximum welding force (pressure) providing close contact of the surfaces welded and time for contact formation between rough surfaces joined, are obtained. Divergence of calculational and experimental data does not exceed 20%. It is confirmed that the most intensive formation of joining occurs in the initial period of welding -the stage of formation of a physical contact, when deformation processes proceed in tensively. Finite formation of a strength joint occurs at the stage of diffusion interaction.

  12. Combustion Joining for Composite Fabrication

    Science.gov (United States)

    2009-10-25

    Inert preheating Process beginning T e m p e r a t u r e , o C Time, s I = 600 Amps D = 10 mm Joule preheating only up to Tig UNCLASSIFIED • C...Honeywell Corp (South Bend, IN) • Currently build aircraft brake disks from carbon fibers • use a long (~ 100 day) CVD process to densify • Brake wear...oxidation with every landing A380 -rejected take off test C-C brakes UNCLASSIFIED Joining C-Based Materials • Difficult task – Carbon cannot be welded

  13. High-temperature stability of laser-joined silicon carbide components

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, Marion, E-mail: marion.herrmann@tu-dresden.de; Lippmann, Wolfgang; Hurtado, Antonio

    2013-11-15

    Silicon carbide is recommended for applications in energy technology due to its good high-temperature corrosion resistance, mechanical durability, and abrasion resistance. The prerequisite for use is often the availability of suitable technologies for joining or sealing the components. A laser-induced process using fillers and local heating of the components represents a possible low-cost option. Investigations in which yttrium aluminosilicate glass was used for laser-induced brazing of SiC components of varying geometry are presented. A four-point bending strength of 112 MPa was found for these joints. In burst tests, laser-joined components were found to withstand internal pressures of up to 54 MPa. Helium leak tests yielded leak rates of less than 10{sup –8} mbar l s{sup −1}, even after 300 h at 900 °C. In contrast, the assemblies showed an increased leak rate after annealing at 1050 °C. The short process time of the laser technique – in the range of a few seconds to a few minutes – results in high temperature gradients and transients. SEM analysis showed that the filler in the seam predominantly solidifies in a glassy state. Crystallization occurred during later thermal loading of the joined components, with chemical equilibrium being established. Differences in seam structures yielded from different cooling rates in the laser process could not be equalized by annealing. The results demonstrated the long-term stability of laser-brazed SiC assemblies to temperatures in the range of glass transformation (900 °C) of the yttrium aluminosilicate filler. In technological investigations, the suitability of the laser joining technique for sealing of SiC components with a geometry approximating that of a fuel element sleeve pin (pin) in a gas-cooled fast reactor was proven.

  14. Biosynthesis of amidated joining peptide from pro-adrenocorticotropin-endorphin

    Energy Technology Data Exchange (ETDEWEB)

    Cullen, E.I.; Mains, R.E. (Johns Hopkins Univ. School of Medicine, Baltimore, MD (USA))

    1987-09-01

    Joining peptide is the major alpha-amidated product of pro-ACTH/endorphin (PAE) in AtT-20 corticotropic tumor cells. To study intracellular joining peptide synthesis, affinity purified antibodies directed against gamma-MSH, joining peptide, and ACTH were used to immunoprecipitate extracts from biosynthetically labeled AtT-20 cells. Immunoprecipitates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by tryptic peptide mapping on HPLC. In steady labeling experiments, radioactivity in amidated joining peptide (JP) increased roughly linearly with time, in the manner of a final product, whereas radioactivity associated with PAE (1-94)NH2 reached a constant value after 2-4 h, indicating that PAE(1-94)NH2 is an intermediate in the biosynthesis of JP. Radioactivity appeared in ACTH(1-39) well before JP, consistent with a cleavage order in which ACTH is cleaved from PAE(1-95) before JP sequences are cleaved from PAE(1-74). This conclusion was supported by tryptic peptide analyses of immunoprecipitates, which indicated that less than 5% of JP-related material is cleaved from PAE(1-74) before being cleaved from ACTH-related sequences. After a pulse label, radioactivity in PAE(1-94)NH2 reached a peak value after 1 h of chase and declined with a half-life of less than 1 h. Amidated JP increased to a constant level after 2 h of chase. Enough radiolabeled PAE(1-94)NH2 was detected to account for about half of the radioactivity found in amidated JP, indicating that about half of JP-related material is first cleaved from PAE(1-95) before being amidated. This result was corroborated using HPLC purification to determine both amidated and glycine-extended forms of JP.

  15. Biosynthesis of amidated joining peptide from pro-adrenocorticotropin-endorphin

    International Nuclear Information System (INIS)

    Cullen, E.I.; Mains, R.E.

    1987-01-01

    Joining peptide is the major alpha-amidated product of pro-ACTH/endorphin (PAE) in AtT-20 corticotropic tumor cells. To study intracellular joining peptide synthesis, affinity purified antibodies directed against gamma-MSH, joining peptide, and ACTH were used to immunoprecipitate extracts from biosynthetically labeled AtT-20 cells. Immunoprecipitates were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by tryptic peptide mapping on HPLC. In steady labeling experiments, radioactivity in amidated joining peptide (JP) increased roughly linearly with time, in the manner of a final product, whereas radioactivity associated with PAE (1-94)NH2 reached a constant value after 2-4 h, indicating that PAE(1-94)NH2 is an intermediate in the biosynthesis of JP. Radioactivity appeared in ACTH(1-39) well before JP, consistent with a cleavage order in which ACTH is cleaved from PAE(1-95) before JP sequences are cleaved from PAE(1-74). This conclusion was supported by tryptic peptide analyses of immunoprecipitates, which indicated that less than 5% of JP-related material is cleaved from PAE(1-74) before being cleaved from ACTH-related sequences. After a pulse label, radioactivity in PAE(1-94)NH2 reached a peak value after 1 h of chase and declined with a half-life of less than 1 h. Amidated JP increased to a constant level after 2 h of chase. Enough radiolabeled PAE(1-94)NH2 was detected to account for about half of the radioactivity found in amidated JP, indicating that about half of JP-related material is first cleaved from PAE(1-95) before being amidated. This result was corroborated using HPLC purification to determine both amidated and glycine-extended forms of JP

  16. In-Network Processing of an Iceberg Join Query in Wireless Sensor Networks Based on 2-Way Fragment Semijoins

    Directory of Open Access Journals (Sweden)

    Hyunchul Kang

    2015-03-01

    Full Text Available We investigate the in-network processing of an iceberg join query in wireless sensor networks (WSNs. An iceberg join is a special type of join where only those joined tuples whose cardinality exceeds a certain threshold (called iceberg threshold are qualified for the result. Processing such a join involves the value matching for the join predicate as well as the checking of the cardinality constraint for the iceberg threshold. In the previous scheme, the value matching is carried out as the main task for filtering non-joinable tuples while the iceberg threshold is treated as an additional constraint. We take an alternative approach, meeting the cardinality constraint first and matching values next. In this approach, with a logical fragmentation of the join operand relations on the aggregate counts of the joining attribute values, the optimal sequence of 2-way fragment semijoins is generated, where each fragment semijoin employs a Bloom filter as a synopsis of the joining attribute values. This sequence filters non-joinable tuples in an energy-efficient way in WSNs. Through implementation and a set of detailed experiments, we show that our alternative approach considerably outperforms the previous one.

  17. In-Network Processing of an Iceberg Join Query in Wireless Sensor Networks Based on 2-Way Fragment Semijoins

    Science.gov (United States)

    Kang, Hyunchul

    2015-01-01

    We investigate the in-network processing of an iceberg join query in wireless sensor networks (WSNs). An iceberg join is a special type of join where only those joined tuples whose cardinality exceeds a certain threshold (called iceberg threshold) are qualified for the result. Processing such a join involves the value matching for the join predicate as well as the checking of the cardinality constraint for the iceberg threshold. In the previous scheme, the value matching is carried out as the main task for filtering non-joinable tuples while the iceberg threshold is treated as an additional constraint. We take an alternative approach, meeting the cardinality constraint first and matching values next. In this approach, with a logical fragmentation of the join operand relations on the aggregate counts of the joining attribute values, the optimal sequence of 2-way fragment semijoins is generated, where each fragment semijoin employs a Bloom filter as a synopsis of the joining attribute values. This sequence filters non-joinable tuples in an energy-efficient way in WSNs. Through implementation and a set of detailed experiments, we show that our alternative approach considerably outperforms the previous one. PMID:25774710

  18. A Decomposition Algorithm for Learning Bayesian Network Structures from Data

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Cordero Hernandez, Jorge

    2008-01-01

    It is a challenging task of learning a large Bayesian network from a small data set. Most conventional structural learning approaches run into the computational as well as the statistical problems. We propose a decomposition algorithm for the structure construction without having to learn...... the complete network. The new learning algorithm firstly finds local components from the data, and then recover the complete network by joining the learned components. We show the empirical performance of the decomposition algorithm in several benchmark networks....

  19. Trend and Development of Semisolid Metal Joining Processing

    Directory of Open Access Journals (Sweden)

    M. N. Mohammed

    2015-01-01

    Full Text Available The semisolid metal joining (SSMJ process or thixojoining process has recently been developed based on the principles of SSM processing, which is a technology that involves the formation of metal alloys between solidus and liquidus temperatures. Thixojoining has many potential benefits, which has encouraged researchers to carry out feasibility studies on various materials that could be utilized in this process and which could transform the production of metal components. This paper reviews the findings in the literature to date in this evolving field, specifically, the experimental details, technology considerations for industrialization, and advantages and disadvantages of the various types of SSMJ methods that have been proposed. It also presents details of the range of materials that have been joined by using the SSMJ process. Furthermore, it highlights the huge potential of this process and future directions for further research.

  20. Joining dissimilar materials using Friction Stir scribe technique

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep; Fifield, Leonard S.

    2016-10-03

    The ability to effectively join materials with vastly different melting points like Aluminum-Steel, Polymer composites - metals has been one of the road blocks in realizing multi-material components for light weighting efforts. Friction stir scribe (FSS) technique is a promising method that produces continuous overlap joint between materials with vastly different melting regimes and high temperature flow characteristics. FSS uses an offset cutting tool at the tip of the FSW pin to create an insitu mechanical interlock between material interfaces. With investments from Vehicle Technology office, US DOE and several automotive manufacturers and suppliers PNNL is developing the FSS process and has demonstrated viability of joining several material combinations. Details of welding trails, unique challenges and mitigation strategies in different material combinations will be discussed. Joint characterization including mechanical tests and joint performances will also be presented.

  1. Bad Luck When Joining the Shortest Queue

    NARCIS (Netherlands)

    Blanc, J.P.C.

    2008-01-01

    A frequent observation in service systems with queues in parallel is that customers in other queues tend to be served faster than those in one’s own queue. This paper quantifies the probability that one’s service would have started earlier if one had joined another queue than the queue that was

  2. On a possible empirical meaning of meets and joins for quantum propositions

    Science.gov (United States)

    Herbut, Fedor

    1984-09-01

    Following up an idea of Jauch, an empirical basis is worked out for the meets (and joins) of quantum propositions through approximate measurement to an arbitrary degree of accuracy of special yes-no effects constructed from chains of yes-no measurements. This is done with a view to interpreting the meets (and joins) as Dedekind's cuts in analogy with irrationals.

  3. On a possible empirical meaning of meets and joins for quantum propositions

    International Nuclear Information System (INIS)

    Herbut, F.

    1984-01-01

    Following up an idea of Jauch, an empirical basis is worked out for the meets (and joins) of quantum propositions through approximate measurement to an arbitrary degree of accuracy of special yes-no effects constructed from chains of yes-no measurements. This is done with a view to interpreting the meets (and joins) as Dedekind's cuts in analogy with irrationals. (orig.)

  4. A New Approach to Joining Dissimilar Ceramic Oxides for Chemical Sensors

    International Nuclear Information System (INIS)

    Zhuiykov, Serge

    2009-01-01

    Conventional joining of dissimilar oxides for sensing electrodes (SE) of chemical sensors has been pivotal to the development of various sensors and is vital to their further development. However, it is shown that the uncertainty (of a fundamental nature) in the properties of dissimilar oxides in SE causes the determination of their sensing characteristics to be ambiguous. Characteristics are different for such controlled parameters as pyrolysis temperature, crystal structure, particle's morphology and size, chemical and phase composition, the coefficient of thermal expansion (CTE), surface architecture, the bulk and surface stoichiometry and type and conductivity of additives. Here, we provide an alternative approach for joining dissimilar metal-oxides for chemical sensors SE. The approach relies on the development of at least one transient liquid oxide phase on the ceramic-SE interface. These results constitute key points relevant to selection oxides for joining, sintering temperatures and heating/cooling temperature rates.

  5. References and arrow notation instead of join operation in query languages

    Directory of Open Access Journals (Sweden)

    Alexandr Savinov

    2012-10-01

    Full Text Available We study properties of the join operation in query languages and describe some of its major drawbacks. We provide strong arguments against using joins as a main construct for retrieving related data elements in general purpose query languages and argue for using references instead. Since conventional references are quite restrictive when applied to data modeling and query languages, we propose to use generalized references as they are defined in the concept-oriented model (COM. These references are used by two new operations, called projection and de-projection, which are denoted by right and left arrows and therefore this access method is referred to as arrow notation. We demonstrate advantages of the arrow notation in comparison to joins and argue that it makes queries simpler, more natural, easier to understand, and the whole query writing process more productive and less error-prone.

  6. Efficient algorithms for factorization and join of blades

    NARCIS (Netherlands)

    Fontijne, D.; Dorst, L.; Bayro-Corrochano, E.; Scheuermann, G.

    2010-01-01

    Subspaces are powerful tools for modeling geometry. In geometric algebra, they are represented using blades and constructed using the outer product. Producing the actual geometrical intersection (meet) and union (join) of subspaces, rather than the simplified linearizations often used in

  7. Efficient algorithms for factorization and join of blades

    NARCIS (Netherlands)

    Fontijne, D.

    2008-01-01

    Subspaces are powerful tools for modeling geometry. In geometric algebra, they are represented using blades and constructed using the outer product. To produce the actual geometrical intersection (Meet) and union (Join) of subspaces, rather than the simplified linearizations often used in

  8. Women's Heart Disease: Join the Heart Truth Community

    Science.gov (United States)

    ... this page please turn JavaScript on. Feature: Women's Heart Disease Join The Heart Truth Community Past Issues / Winter 2014 Table of Contents National Symbol The centerpiece of The Heart Truth ® is The Red Dress ® which was introduced ...

  9. Joining of Tungsten Armor Using Functional Gradients

    International Nuclear Information System (INIS)

    John Scott O'Dell

    2006-01-01

    The joining of low thermal expansion armor materials such as tungsten to high thermal expansion heat sink materials has been a major problem in plasma facing component (PFC) development. Conventional planar bonding techniques have been unable to withstand the high thermal induced stresses resulting from fabrication and high heat flux testing. During this investigation, innovative functional gradient joints produced using vacuum plasma spray forming techniques have been developed for joining tungsten armor to copper alloy heat sinks. A model was developed to select the optimum gradient architecture. Based on the modeling effort, a 2mm copper rich gradient was selected. Vacuum plasma pray parameters and procedures were then developed to produce the functional gradient joint. Using these techniques, dual cooling channel, medium scale mockups (32mm wide x 400mm length) were produced with vacuum plasma spray formed tungsten armor. The thickness of the tungsten armor was up to 5mm thick. No evidence of debonding at the interface between the heat sink and the vacuum plasma sprayed material was observed.

  10. [Joining WHO of Republic of Korea and the projects in the 1950s].

    Science.gov (United States)

    Lee, Sun Ho

    2014-04-01

    The Republic of Korea(ROK) and the World Health Organization(WHO) have done many projects successfully from 1949, in which the government of First Republic joined the WHO. However the relation between the ROK and the WHO have not been studied very much so far. The main purpose of this research, which could be done by the support of WHO, is connected with three questions. First research point would be "how could the ROK joined WHO in 1949 and what's the meaning of it? And the what's the difference in the process for the WHO between the ROK of 1949 and the DPRK(Democratic People's Republic of Korea) of 1973?" The first president of the ROK, Rhee Syngman, who had received his Ph. D.(about international politics) from Princeton University in 1910, was strongly interested in joining international institutes like UN, WHO. The ROK that could join WHO on 17 August 1949, with the approval of Assembly on 25 May 1949, was one of the founder members of the Western Pacific Region. By joining WHO, the ROK could get chance to increase the level of public health and its administration in 1950's. But the DPRK manage to became a member of WHO on 19 May 1973 and joined the South-East Asia Region. The joining of DPRK was influenced by the easing of the cold war after the Nixon Doctrine and the joining of the China(People's Republic of China). Second research point would be "What kind of roll did the WHO take in the First Republic?" Yet the public health administration of the First Republic that had been made in the period of US army military government was been strongly influenced by USA, the roll of WHO was also important in the 1950's. Last research point would be "What kind of the projects did the ROK and the WHO take part in during the period of he First Republic? How could evaluate the results?" The ROK and the WHO handled the projects including health services, communicable disease prevention and control, control of noncommunicable diseases, and protection of health. Specially

  11. Joining Silicon Carbide Components for Space Propulsion, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I program will identify the joining materials and demonstrate the processes that are suited for construction of advanced ceramic matrix composite...

  12. Contribution to the joining technique of SiC-ceramic using metallic interlayers

    International Nuclear Information System (INIS)

    Gottselig, B.; Gyarmati, E.; Naoumidis, A.; Nickel, H.

    1989-07-01

    For ceramics to be feasible for technical uses suitable joining techniques must be developed that allow reliable ceramic-ceramic and ceramic-metal connections. As yet such procedures exist, based only on empirical studies omitting the reaction behaviour of the joining materials and the specific properties of the reaction products. For this reason the reaction behaviour of silicon carbide with selected metals and subsequently the compatibility of these reaction layers with the ceramic substrate were investigated. The results gained were then applied to silicon carbide joints using intermediate metallic layers. With the reaction phase Ti 3 SiC 2 , found to be the most suitable in basic experiments, joining strengths could be obtained relative tc the mean strength and Weibull modulus comparable to those of the ceramic starting material. (orig.) [de

  13. Reconstrucción de la memoria Colectiva: Madres y Abuelas de Plaza de Mayo : Relatos del Futuro

    OpenAIRE

    Coria, Carla

    2013-01-01

    El Proyecto de Extensión Universitaria "Madres y Abuelas de Plaza de Mayo" fue realizado por el Taller de Producción Audiovisual I de la Facultad de Periodismo y Comunicación Social de la Universidad Nacional de La Plata. Su objetivo fue relevar y compilar relatos audiovisuales de las madres y abuelas víctimas del terrorismo de Estado en la Argentina para socializar sus experiencias de vida, fomentar la participación política y el compromiso de la comunidad universitaria. El present...

  14. Joining technology development summary, 189a OH024

    International Nuclear Information System (INIS)

    Edmonds, D.P.

    1978-01-01

    Joining technology is discussed for Breeder Reactor technology including welding development and mechanical properties of weldments for austenitic stainless steels, high-temperature structural design data for austenitic stainless steel weldments and advanced transition joints is discussed. Technology developed in this program is briefly reviewed

  15. Using Social Media as a Tool for Learning: A Multi-Disciplinary Study

    Science.gov (United States)

    Delello, Julie A.; McWhorter, Rochell R.; Camp, Kerri M.

    2015-01-01

    In order to explore the rich dynamics of using social media as a tool for learning within higher education classrooms, researchers across three disciplines: education, human resource development (HRD), and marketing, joined forces seeking ways to focus on learning through a retrospective analysis. Three concepts--engagement, community building,…

  16. COMPETITIVENESS ОF CHINESE ECONOMY AFTER JOINING WORLD TRADE ORGANIZATION

    Directory of Open Access Journals (Sweden)

    V. S. Shlik

    2008-01-01

    Full Text Available The paper contains analysis of the China’s membership in the World Trade Organization (WTO. The advantages and disadvantages of WTO joining and also prospects and unforeseen difficulties are given in the paper. The People’s Republic of China has already been a full-member of WTO for 6 years. The Chinese Government has mainly fulfilled all the conditions which were imposed for WTO joining. They concerned customs legislation that presupposed a considerable reduction of custom duties, an access to the service market for foreign investors, an increase of responsibility for violation of intellectual property rights. Many of these conditions have been fulfilled in advance.

  17. Joining method for pressure tube and martensitic stainless steel tube

    International Nuclear Information System (INIS)

    Kimoto, Hiroshi; Koike, Hiromitsu.

    1993-01-01

    In a joining portion of zirconium alloy and a stainless steel, the surface of martensitic stainless steel being in contact with Zr and Zr alloy is applied with a laser quenching solidification treatment before expanding joining of them to improve the surface. This can provide the surface with refined coagulated cell tissues and make deposits and impurities homogeneous and solubilized. As a result, the surface of the martensitic stainless steel has highly corrosion resistance, to suppress contact corrosion with Zr and Zr alloy. Accordingly, even if it is exposed to high temperature water of 200 to 350degC, failures of Zr and Zr alloy can be suppressed. (T.M.)

  18. Research and Development Opportunities for Joining Technologies in HVAC&R

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Burlington, MA (United States); Guernsey, Matt [Navigant Consulting, Burlington, MA (United States); Young, Jim [Navigant Consulting, Burlington, MA (United States)

    2015-10-01

    The Building Technologies Office (BTO) works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. This opportunity assessment aims to advance BTO’s energy savings, GHG reduction, and other program goals by identifying research and development (R&D) initiatives for joining technologies in heating, ventilation, air-conditioning, and refrigeration (HVAC&R) systems. Improving joining technologies for HVAC&R equipment has the potential to increase lifetime equipment operating efficiency, decrease equipment and project cost, and most importantly reduce hydroflourocarbon (HFC) refrigerant leakage to support HFC phasedown and GHG reduction goals.

  19. The roles of lesson study in the development of mathematics learning instrument based on learning trajectory

    Science.gov (United States)

    Misnasanti; Dien, C. A.; Azizah, F.

    2018-03-01

    This study is aimed to describe Lesson Study (LS) activity and its roles in the development of mathematics learning instruments based on Learning Trajectory (LT). This study is a narrative study of teacher’s experiences in joining LS activity. Data collecting in this study will use three methods such as observation, documentations, and deep interview. The collected data will be analyzed with Milles and Huberman’s model that consists of reduction, display, and verification. The study result shows that through LS activity, teachers know more about how students think. Teachers also can revise their mathematics learning instrument in the form of lesson plan. It means that LS activity is important to make a better learning instruments and focus on how student learn not on how teacher teach.

  20. Status of Joining Thin Sheet and Thin Wall Tubes of 14YWT

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, David T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Unocic, Kinga A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tang, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-18

    Beginning this fiscal year, the FCRD research project initiated an investigation on joining thin sections of the advanced ODS 14YWT ferritic alloy. Friction stir welding (FSW) was investigated as a method to join thin plate and tubing of 14YWT since it is a solid state joining method that has been shown in past studies to be a promising method for joining plates of ODS alloys, such as 14YWT. However, this study will attempt to be the first to demonstrate if FSW can successfully join thin plates and thin wall tubing of 14YWT. In the first FSW attempt, a 1.06 cm thick plate of 14YWT (SM13 heat) was successfully rolled at 1000ºC to the target thickness of 0.1 cm with no edge cracking. This achievement is a highlight since previous attempts to roll 14YWT plates have resulted in extensive cracking. For the FSW run, a pin tool being developed by the ORNL FSW Process Development effort was used. The first FSW run successfully produced a bead-on-plate weld in the 0.1 cm thick plate. The quality of the weld zone appears very good with no evidence of large defects such as cavities. The microstructural characterization study of the bead-on-plate weld zone has been initiated to compare the results of the microstructure analysis with those obtained in the reference microstructural analysis of the 14YWT (SM13 heat) that showed ultra-fine grain size of 0.43 μm and a high number density of ~2-5 nm sizes oxygen-enriched nanoclusters.

  1. Alternative electro-chemically based processing routes for joining of plasma facing components

    Energy Technology Data Exchange (ETDEWEB)

    Krauss, Wolfgang, E-mail: wolfgang.krauss@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Materials Research III, Hermann-von-Helmholtz-Platz 1 76344 Eggenstein-Leopoldshafen (Germany); Lorenz, Julia; Holstein, Nils; Konys, Juergen [Karlsruhe Institute of Technology (KIT), Institute for Materials Research III, Hermann-von-Helmholtz-Platz 1 76344 Eggenstein-Leopoldshafen (Germany)

    2011-10-15

    Tungsten is considered in fusion technology as functional and structural material in the area of blanket and divertor for future application in DEMO. The KIT design of a He-cooled divertor includes joints between W and W-alloys as well as of W with Eurofer-steel. The main challenges range from expansion mismatch problem for tungsten/steel joints over metallurgical reactions with brittle phase formation to crack stopping ability and excellent surface wetting. These requirements were only met partly and insufficiently in the past e.g. by direct Cu-casting of tungsten onto steel. Both, the joining needs and the observed failure scenarios of conventionally joined components initiated the development of improved joining technologies based on electro-chemical processing routes. As electrolytes aqueous and aprotic, water free, system are integrated into this development line. In the first step principle requirements are presented to guarantee a reproducible and adherent deposition of scales based on Ni and Cu acting as inter layers and filler, respectively, to generate a real metallurgical bonding as demonstrate by 1100 deg. C joining tests. The development field aprotic systems based on ionic liquids is discussed with respect to enable development of refractory metal based fillers with focus high temperature W-W brazing.

  2. A review of the US joining technologies for plasma facing components in the ITER fusion reactor

    International Nuclear Information System (INIS)

    Odegard, B.C. Jr.; Cadden, C.H.; Watson, R.D.; Slattery, K.T.

    1998-02-01

    This paper is a review of the current joining technologies for plasma facing components in the US for the International Thermonuclear Experimental Reactor (ITER) project. Many facilities are involved in this project. Many unique and innovative joining techniques are being considered in the quest to join two candidate armor plate materials (beryllium and tungsten) to a copper base alloy heat sink (CuNiBe, OD copper, CuCrZr). These techniques include brazing and diffusion bonding, compliant layers at the bond interface, and the use of diffusion barrier coatings and diffusion enhancing coatings at the bond interfaces. The development and status of these joining techniques will be detailed in this report

  3. Load Balancing Issues with Constructing Phylogenetic Trees using Neighbour-Joining Algorithm

    International Nuclear Information System (INIS)

    Al Mamun, S M

    2012-01-01

    Phylogenetic tree construction is one of the most important and interesting problems in bioinformatics. Constructing an efficient phylogenetic tree has always been a research issue. It needs to consider both the correctness and the speed of the tree construction. In this paper, we implemented the neighbour-joining algorithm, using Message Passing Interface (MPI) for constructing the phylogenetic tree. Performance is efficacious, comparing to the best sequential algorithm. From this paper, it would be clear to the researchers that how load balance can make a great effect for constructing phylogenetic trees using neighbour-joining algorithm.

  4. People's Republic of China joins ITER

    International Nuclear Information System (INIS)

    Huo Yuping

    2003-01-01

    The People's Republic of China is the largest developing country with a projected population of 1.6 - 2 billion people and an energy consumption growing from the current 1.3 Billion Tons Coal Equivalent (TCE) to more than 4 Billion TCE by 2050. This large demand needs to be accommodated in a sustainable way, requiring energy generation in an environmentally friendly way. Fusion is one of the most promising candidates to solve this important issue. This explains why in the second half of 2002, the ITER Participants' delegations to the ITER Negotiations received expression of interest from the People's Republic of China in the possibility of Chinese participation in ITER, including joining the ongoing Negotiations. The speed with which the Chinese authorities had made their decision to participate in the ITER Negotiations was impressive. The Prime Minister and the State Council had already confirmed their decision to apply to join ITER as soon as possible, and Mr. Xu Guanhua, Chinese Minister of Science and Technology, wrote on behalf of his government, on 10 January 2003, to the four heads of delegation in the ITER Negotiations, requesting that China participate in the present ITER Negotiations, pointing out that China intends to provide a substantial contribution to the Project, comparable to what is currently envisaged by some of the participants in the present Negotiations

  5. M3-learning - Exploring mobile multimedia microblogging learning

    Directory of Open Access Journals (Sweden)

    Carmen Holotescu

    2011-12-01

    Full Text Available In the context in which the new frontier of Web 2.0 is marked out by the use of mobile devices anywhere, anytime, by anyone and anything, our paper aims at valorizing the mobility parameters of the Cirip.eu platform in order to integrate the microblogging technology in higher education, for the purpose of increasing knowledge and learning in authentic mobile learning environments. As an innovation for the mobile learning through microblogging, we mention the following elements:•On a technological level: localize / join mobile groups, access content and OERs, share opinions, work collaboratively on multimedia objects, participate in polls / quizzes, receive / send updates via SMS, create / manage mobile PLEs, recover password via SMS;On a pedagogical level: develop multimedia educational resources / learning objects by using mobile technologies specific for different subject areas to be teached with microblogging.Thus, the aim of our experiment is not only to provide a general overview / a framework for using microblogging through mobile technologies, but also a way to enhance teaching and learning in formal university courses and to present mobile microblogging learning benefits, opportunities, limits and risks.

  6. Current Perspectives on Desmoid Tumors: The Mayo Clinic Approach

    International Nuclear Information System (INIS)

    Joglekar, Siddharth B.; Rose, Peter S.; Sim, Franklin; Okuno, Scott; Petersen, Ivy

    2011-01-01

    Desmoid tumors are a rare group of locally aggressive, non malignant tumors of fibroblastic origin that can lead to significant morbidity due to local invasion. Despite advances in the understanding of these tumors, their natural history is incompletely understood and the optimal treatment is still a matter of debate. Local control is the main goal of treatment and there has been a change in philosophy regarding the management of these tumors from aggressive surgical resection to function preservation. A multidisciplinary approach is essential to plan local control with acceptable morbidity. The current Mayo Clinic algorithm for the treatment of these tumors is based on institutional experience and the available evidence in the literature: asymptomatic/non progressive lesions away from vital structures are managed with observation and regular imaging; primary or recurrent desmoid tumors which are symptomatic or progressive or near vital structures are managed with wide surgical resection when wide surgical margins are possible with minimal functional and cosmetic loss. When positive or close surgical margins are likely, surgical resection with adjuvant radiotherapy or definitive radiotherapy is preferred. If likely functional or cosmetic deficit is unacceptable, radiotherapy is the treatment of choice. Unresectable lesions are considered for radiotherapy, chemotherapy or newer modalities however an unresectable lesion associated with a painful, functionless, infected extremity is managed with an amputation

  7. Current Perspectives on Desmoid Tumors: The Mayo Clinic Approach

    Directory of Open Access Journals (Sweden)

    Scott Okuno

    2011-08-01

    Full Text Available Desmoid tumors are a rare group of locally aggressive, non malignant tumors of fibroblastic origin that can lead to significant morbidity due to local invasion. Despite advances in the understanding of these tumors, their natural history is incompletely understood and the optimal treatment is still a matter of debate. Local control is the main goal of treatment and there has been a change in philosophy regarding the management of these tumors from aggressive surgical resection to function preservation. A multidisciplinary approach is essential to plan local control with acceptable morbidity. The current Mayo Clinic algorithm for the treatment of these tumors is based on institutional experience and the available evidence in the literature: asymptomatic/non progressive lesions away from vital structures are managed with observation and regular imaging; primary or recurrent desmoid tumors which are symptomatic or progressive or near vital structures are managed with wide surgical resection when wide surgical margins are possible with minimal functional and cosmetic loss. When positive or close surgical margins are likely, surgical resection with adjuvant radiotherapy or definitive radiotherapy is preferred. If likely functional or cosmetic deficit is unacceptable, radiotherapy is the treatment of choice. Unresectable lesions are considered for radiotherapy, chemotherapy or newer modalities however an unresectable lesion associated with a painful, functionless, infected extremity is managed with an amputation.

  8. Method of and apparatus for use in joining tubular components and tube assemblies made thereby

    International Nuclear Information System (INIS)

    Percival, S.R.

    1979-01-01

    A method of joining difficult to weld materials involves the forming of a rolled joint. A particular application is the joining of zirconium alloy calandria tubes to stainless steel tube-plates in a SGHWR. (UK)

  9. Advanced fusion welding processes, solid state joining and a successful marriage. [production of aerospace structures

    Science.gov (United States)

    Miller, F. R.

    1972-01-01

    Joining processes for aerospace systems combine fusion welding and solid state joining during production of metal structures. Detailed characteristics of electron beam welding, plasma arc welding, diffusion welding, inertia welding and weldbond processes are discussed.

  10. Borated stainless steel joining technology. Final report

    International Nuclear Information System (INIS)

    Smith, R.J.

    1994-12-01

    EPRI had continued investigating the application of borated stainless steel products within the US commercial nuclear power industry through participation in a wide range of activities. This effort provides the documentation of the data obtained in the development of the ASTM-A887 Specification preparation effort conducted by Applied Science and Technology and the most recent efforts for the development of joining technologies conducted under a joint effort by EPRI, Carpenter Technologies and Sandia National Laboratory under a US DOE CRADA program. The data presented in this report provides the basis for the ASTM specification which has been previously unpublished by EPRI and the data generated in support of the Joining Technology research effort conducted at Sandia. The results of the Sandia research, although terminated prior to the completion, confirms earlier data that the degradation of material properties in fusion welded borated stainless steels occurs in the heat affected zone of the weld area and not in the base material. The data obtained also supports the conclusion that the degradation of material properties can be overcome by post weld heat treatment which can result in material properties near the original unwelded metal

  11. Governing Bodies That Consider Joining or Creating Federations

    Science.gov (United States)

    Howarth, Eleanor

    2015-01-01

    This article reports the findings of a research study exploring what motivates governing bodies to consider joining or creating a federation, their experiences of the process and the barriers faced. The research methodology involved semi-structured telephone interviews, face-to-face interviews and analysis of relevant documentation. The varied…

  12. Joining Forces: The Case of Alliant International University

    Science.gov (United States)

    Leslie, Heather

    2013-01-01

    Mergers and acquisitions are a prevalent force in higher education as more colleges and universities are joining forces to expand resources, enhance missions, or prevent closures. This study examines the merger of Alliant University (formerly California School of Professional Psychology) with United States International University to create what…

  13. 46 CFR 56.75-30 - Pipe joining details.

    Science.gov (United States)

    2010-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND... cut or machined square and the edges shall be held closely together to insure a satisfactory joint. (b... satisfactory for the brazing alloy to be employed, method of heating, and material to be joined. The annular...

  14. The development of joining doped graphite to copper for first wall application in HT-7 tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Zhangjian, E-mail: zhouzhj@mater.ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhong Zhihong [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Chen Junling [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Ge Changchun [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China)

    2010-12-15

    Two joining methods have been developed for joining carbon based plasma facing material to copper based heat sink material for the potential application in HT-7 and EAST tokamak. The first joining method is based on brazing technique by using a rapidly solidified foil-type Ti-Zr based amorphous filler with a melting temperature of 850 deg. C. The other joining method is direct active metal casting-casting the premixed powders of copper and active transition metals on the mechanical machined carbon surface directly. SEM observations demonstrate high quality of joining surface for both joints. The brazing technique is more promising for fabrication joint with larger size compared with the direct active alloy casting method. High heat flux test using an e-beam device was performed on the actively cooled C/Cu joint fabricated by brazing method. There has no damage occurred on the joint after heat loading at 6 MW/m{sup 2}.

  15. International Symposium on Interfacial Joining and Surface Technology (IJST2013)

    International Nuclear Information System (INIS)

    Takahashi, Yasuo

    2014-01-01

    Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27–29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

  16. International Symposium on Interfacial Joining and Surface Technology (IJST2013)

    Science.gov (United States)

    Takahashi, Yasuo

    2014-08-01

    Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27-29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

  17. Informe Ana Libertad Baratti de la Cuadra : Informe de Radio Universidad Nacional de La Plata sobre la recuperación de la nieta número 115, por Abuelas de Plaza de Mayo

    OpenAIRE

    Pigeau, Nora; Barnes de Carlotto, Estela; Lovazzano, Eduardo; Velazco, Luis; Cuadra, Estela de la; Cardoso, Miriam

    2014-01-01

    Informe de Radio Universidad Nacional de La Plata sobre el hallazgo de la nieta número 115, recuperada por Abuelas de Plaza de Mayo: Ana Libertad Baratti de la Cuadra. El 22 de agosto de 2014 la ciudad de La Plata y el país entero celebró el encuentro de la nieta de la co-fundadora y primera presidenta de la Asociación Abuelas de Plaza de Mayo, Alicia “Licha” Zubasnabar de De la Cuadra: apareció Ana Libertad Baratti de la Cuadra. Héctor Carlos Baratti y de Elena de la Cuadra fueron se...

  18. Diluvios de grandeza: agua, territorio y poder en el río Mayo en el noroeste de México, 1880-1910

    Directory of Open Access Journals (Sweden)

    Jeffrey M. Banister

    2012-01-01

    Full Text Available El actual distrito de riego 038 o valle del Mayo, que forma parte del espacio de riego del noroeste de México, surge de luchas históricas por construir un orden oficial en un mundo diverso de signos, símbolos, procesos, lugares y personas. Es el hogar ancestral de los yoremes (mayos, un grupo indígena para el que la colonización y el desarrollo agrícola han significado la pérdida de autonomía y de la movilidad estacional que requieren para subsistir en un terreno árido. Es el lugar donde nació el presidente Álvaro Obregón, otrora productor de garbanzo, que transformó las prácticas de riego de fines del siglo xix en las leyes e instituciones para la administración del agua del siglo xx. Reconfigurar el territorio con el fin de centralizar ("federalizar" los recursos hídricos ha probado ser excesivamente difícil en la zona del Mayo, pero esto fue así en particular al inicio del proceso de federalización, una época de modernización dinámica bajo la dirección del presidente Porfirio Díaz (1876-1910. La investigación sobre la política hidráulica de México, con algunas importantes excepciones, ha tendido a enfocarse en la centraliza- ción. Los estudiosos le han prestado menor atención a los momentos y lugares en los que el agua escapa al control de las autoridades. Este trabajo explora la importancia de la administración del agua (y más ampliamente la formación del Estado a finales del siglo xix, en vísperas de la Revolución Mexicana de 1910, como una serie continua, siempre incipiente de derechos y proyectos relativos a las tierras. Entender las debilidades e incompetencias de dichos proyectos ofrece un discernimiento crucial acerca de la política hidráulica posrevolucionaria o contemporánea.

  19. Lower and Middle Ordovician conodonts of Laurentian affinity from blocks of limestone in the Rosroe Formation, South Mayo Trough, western Ireland and their palaeogeographic implication

    DEFF Research Database (Denmark)

    Stouge, Svend; Harper, David A. T.; Sevastopulo, George D.

    2016-01-01

    The Middle Ordovician Rosroe Formation consists of some 1350m of coarse, mainly siliciclastic to volcaniclastic sedimentary rocks, deposited in a submarine fan environment, and is restricted to the southern limb of the South Mayo Trough, western Ireland. Discrete allochthonous blocks, reaching 5m...

  20. The Mechanism of Solid State Joining THA with AlMg3Mn Alloy

    Directory of Open Access Journals (Sweden)

    Kaczorowski M.

    2014-06-01

    Full Text Available The results of experimental study of solid state joining of tungsten heavy alloy (THA with AlMg3Mn alloy are presented. The aim of these investigations was to study the mechanism of joining two extremely different materials used for military applications. The continuous rotary friction welding method was used in the experiment. The parameters of friction welding process i.e. friction load and friction time in whole studies were changed in the range 10 to 30kN and 0,5 to 10s respectively while forging load and time were constant and equals 50kN and 5s. The results presented here concerns only a small part whole studies which were described elsewhere. These are focused on the mechanism of joining which can be adhesive or diffusion controlled. The experiment included macro- and microstructure observations which were supplemented with SEM investigations. The goal of the last one was to reveal the character of fracture surface after tensile test and to looking for anticipated diffusion of aluminum into THA matrix. The results showed that joining of THA with AlMg2Mn alloy has mainly adhesive character, although the diffusion cannot be excluded.

  1. Approaching Assessment from a Learning Perspective: Elevating Assessment beyond Technique

    Science.gov (United States)

    Simms, Michele; George, Beena

    2014-01-01

    Assessment is a key process in assuring quality education but how is it linked to the scholarship of teaching and learning (SoTL)? How can we join teaching and learning to the assessment process rather than view it as a stand-alone component in course and/or program development? This paper explores the relationship between assessment and the SoTL…

  2. Accelerating foreign-key joins using asymmetric memory channels

    NARCIS (Netherlands)

    Pirk, H.; Manegold, S.; Kersten, M.

    2011-01-01

    Indexed Foreign-Key Joins expose a very asymmetric access pattern: the Foreign-Key Index is sequentially scanned whilst the Primary-Key table is target of many quasi-random lookups which is the dominant cost factor. To reduce the costs of the random lookups the fact-table can be (re-) partitioned at

  3. Development of a double beam process for joining aluminum and steel

    Science.gov (United States)

    Frank, Sascha

    2014-02-01

    Multi-material structures pose an attractive option for overcoming some of the central challenges in lightweight design. An exceptionally high potential for creating cost-effective lightweight solutions is attributed to the combination of steel and aluminum. However, these materials are also particularly difficult to join due to their tendency to form intermetallic compounds (IMCs). The growth of these compounds is facilitated by high temperatures and long process times. Due to their high brittleness, IMCs can severely weaken a joint. Thus, it is only possible to create durable steel-aluminum joints when the formation of IMCs can be limited to a non-critical level. To meet this goal, a new joining method has been designed. The method is based on the combination of a continuous wave (pw) and a pulsed laser (pw) source. Laser beams from both sources are superimposed in a common process zone. This makes it possible to apply the advantages of laser brazing to mixed-metal joints without requiring the use of chemical fluxes. The double beam technology was first tested in bead-on-plate experiments using different filler wire materials. Based on the results of these tests, a process for joining steel and aluminum in a double-flanged configuration is now being developed. The double flanged seams are joined using zinc- or aluminum-based filler wires. Microsections of selected seams show that it is possible to achieve good base material wetting while limiting the growth of IMCs to acceptable measures. In addition, the results of tensile tests show that high joint strengths can be achieved.

  4. Understanding the spark plasma sintering from the view of materials joining

    International Nuclear Information System (INIS)

    Dong, Peng; Wang, Zhe; Wang, Wenxian; Chen, Shaoping; Zhou, Jun

    2016-01-01

    Spark plasma sintering (SPS) is an attractive consolidation process. However, the mechanism behind this process is still an open topic for debate. This paper presents the first attempt to understand the SPS mechanism from perspective of materials joining. For this, TiNi_f/Al composites were fabricated by SPS, and the interfacial microstructures were investigated using field emission scanning electron microscopy and transmission electron microscopy. According to the experimental results, several joining processes were reflected well during SPS, involving micro-arc welding, electric resistance welding and diffusion welding. The proposed understanding of SPS will be helpful to the control of sintering quality.

  5. Loosening and damage mechanism of thread-joined structures in nuclear power equipment

    International Nuclear Information System (INIS)

    Tang Hui

    1999-01-01

    The author proposes a loosening mechanism of thread-joined structures under vibrate environments in the nuclear power equipment and structures, which is on the base of the macro and imperceptible-mechanics analysis. It has answered the problems on the seizing, the adhesive wearing, the generation of cracks, the thread-tooth fracture. So it has a conclusion that the loosening of thread-joined structures is essential trend, in other words, the locking property of thread-pair is failure under vibrate environments

  6. A cross-sectional study of learning styles among continuing medical education participants.

    Science.gov (United States)

    Collins, C Scott; Nanda, Sanjeev; Palmer, Brian A; Mohabbat, Arya B; Schleck, Cathy D; Mandrekar, Jayawant N; Mahapatra, Saswati; Beckman, Thomas J; Wittich, Christopher M

    2018-04-27

    Experiential learning has been suggested as a framework for planning continuing medical education (CME). We aimed to (1) determine participants' learning styles at traditional CME courses and (2) explore associations between learning styles and participant characteristics. Cross-sectional study of all participants (n = 393) at two Mayo Clinic CME courses who completed the Kolb Learning Style Inventory and provided demographic data. A total of 393 participants returned 241 surveys (response rate, 61.3%). Among the 143 participants (36.4%) who supplied complete demographic and Kolb data, Kolb learning styles included diverging (45; 31.5%), assimilating (56; 39.2%), converging (8; 5.6%), and accommodating (34; 23.8%). Associations existed between learning style and gender (p = 0.02). For most men, learning styles were diverging (23 of 63; 36.5%) and assimilating (30 of 63; 47.6%); for most women, diverging (22 of 80; 27.5%), assimilating (26 of 80; 32.5%), and accommodating (26 of 80; 32.5%). Internal medicine and psychiatry CME participants had diverse learning styles. Female participants had more variation in their learning styles than men. Teaching techniques must vary to appeal to all learners. The experiential learning theory sequentially moves a learner from Why? to What? to How? to If? to accommodate learning styles.

  7. Characterization of joining sites of a viral histone H4 on host insect chromosomes.

    Directory of Open Access Journals (Sweden)

    Sunil Kumar

    Full Text Available A viral histone H4 (CpBV-H4 is encoded in a polydnavirus, Cotesia plutellae bracovirus (CpBV. It plays a crucial role in parasitism of an endoparasitoid wasp, C. plutellae, against diamondback moth, Plutella xylostella, by altering host gene expression in an epigenetic mode by its N-terminal tail after joining host nucleosomes. Comparative transcriptomic analysis between parasitized and nonparasitized P. xylostella by RNA-Seq indicated that 1,858 genes were altered at more than two folds in expression levels at late parasitic stage, including 877 up-regulated genes and 981 down-regulated genes. Among parasitic factors altering host gene expression, CpBV-H4 alone explained 16.3% of these expressional changes. To characterize the joining sites of CpBV-H4 on host chromosomes, ChIP-Seq (chromatin immunoprecipitation followed by deep sequencing was applied to chromatins extracted from parasitized larvae. It identified specific 538 ChIP targets. Joining sites were rich (60.2% in AT sequence. Almost 40% of ChIP targets included short nucleotide repeat sequences presumably recognizable by transcriptional factors and chromatin remodeling factors. To further validate these CpBV-H4 targets, CpBV-H4 was transiently expressed in nonparasitized host at late larval stage and subjected to ChIP-Seq. Two kinds of ChIP-Seqs shared 51 core joining sites. Common targets were close (within 1 kb to genes regulated at expression levels by CpBV-H4. However, other host genes not close to CpBV-H4 joining sites were also regulated by CpBV-H4. These results indicate that CpBV-H4 joins specific chromatin regions of P. xylostella and controls about one sixth of the total host genes that were regulated by C. plutellae parasitism in an epigenetic mode.

  8. Clinical use of the Mayo-Portland Adaptability Inventory in rehabilitation after paediatric acquired brain injury.

    Science.gov (United States)

    Oddson, Bruce; Rumney, Peter; Johnson, Patricia; Thomas-Stonell, Nancy

    2006-11-01

    The Mayo-Portland Adaptability Inventory (MPAI; designed to be administered by clinicians) is a popular measure of disability following head injury in adults. Its acceptability, validity, and reliability were assessed for use with children. There were 335 children and adolescents (215 males, 120 females) aged between 1 and 19 years at injury (median age 9y 8mo [SD 5y]) in our sample. The test was acceptable to respondents, rapidly and easily administered, and required only small modifications. It demonstrated validity against client and parent reports of major symptoms. It demonstrated test-retest reliability within the limitations of our data and excellent interrater accord. Consequently, the MPAI is recommended for paediatric use for evaluating rehabilitation needs and therapy outcome.

  9. Influence of Hub Parameters on Joining Forces and Torque Transmission Output of Plastically-Joined Shaft-Hub-Connections with a Knurled Contact Surface

    Directory of Open Access Journals (Sweden)

    Lukáš Suchý

    2018-04-01

    Full Text Available A knurled interference fit is a machine part connection made by a plastic joining, which includes the advantages of commonly-used shaft-hub-connections. The combination of the friction and form fit, which are responsible for torque transmission, results in a higher power density than conventional connections. In this paper, parameter gaps are bridged with the aim of enhance the design calculation of the knurled interference fit. Experimental investigations on the shaft chamfer angle (100Cr6 and hub-diameter-ratio (AlSi1MgMn were performed. The analytical approaches are developed for calculating the joining force and maximal torque capacity by accounting for experimentally investigated loss of load transmission at high hub-diameter-ratios and high shaft chamfer angles. The presented calculation approach is an accurate tool for the assessment of early machine designs of the knurled interference fit and helps to save from having to perform time-extensive tests.

  10. Joining-Splitting Interaction of Noncritical String

    Science.gov (United States)

    Hadasz, Leszek; Jaskólski, Zbigniew

    The joining-splitting interaction of noncritical bosonic string is analyzed in the light-cone formulation. The Mandelstam method of constructing tree string amplitudes is extended to the bosonic massive string models of the discrete series. The general properties of the Liouville longitudinal excitations which are necessary and sufficient for the Lorentz covariance of the light-cone amplitudes are derived. The results suggest that the covariant and the light-cone approach are equivalent also in the noncritical dimensions. Some aspects of unitarity of interacting noncritical massive string theory are discussed.

  11. Cores, Joins and the Fano-Flow Conjectures

    Directory of Open Access Journals (Sweden)

    Jin Ligang

    2018-02-01

    Full Text Available The Fan-Raspaud Conjecture states that every bridgeless cubic graph has three 1-factors with empty intersection. A weaker one than this conjecture is that every bridgeless cubic graph has two 1-factors and one join with empty intersection. Both of these two conjectures can be related to conjectures on Fano-flows. In this paper, we show that these two conjectures are equivalent to some statements on cores and weak cores of a bridgeless cubic graph. In particular, we prove that the Fan-Raspaud Conjecture is equivalent to a conjecture proposed in [E. Steffen, 1-factor and cycle covers of cubic graphs, J. Graph Theory 78 (2015 195–206]. Furthermore, we disprove a conjecture proposed in [G. Mazzuoccolo, New conjectures on perfect matchings in cubic graphs, Electron. Notes Discrete Math. 40 (2013 235–238] and we propose a new version of it under a stronger connectivity assumption. The weak oddness of a cubic graph G is the minimum number of odd components (i.e., with an odd number of vertices in the complement of a join of G. We obtain an upper bound of weak oddness in terms of weak cores, and thus an upper bound of oddness in terms of cores as a by-product.

  12. Laser beam joining of non-oxidic ceramics for ultra high temperature resistant joints

    International Nuclear Information System (INIS)

    Lippmann, W.; Knorr, J.; Wolf, R.; Reinecke, A.M.; Rasper, R.

    2004-01-01

    The excellent technical properties of silicon carbide (SiC) and silicon nitride (Si 3 N 4 ) ceramics, such as resistance to extreme temperatures, oxidation, mechanical wear, aggressive chemical substances and radioactive radiation and also its high thermal conductivity and good temperature-shock resistance, make these ceramics ideally suited for use in the field of nuclear technology. However, their practical use has been limited so far because of the unavailability of effective joining techniques for these ceramics, especially for high temperature applications. A new joining technology (CERALINK registered ) has been developed in a network project which allowed high temperature resistant and vacuum-tight joining of SiC or Si 3 N 4 ceramics. A power laser is used as heat source, which makes it possible to join ceramic components in free atmosphere in combination with a pure oxidic braze filler. As no furnace is necessary, there are no limitations on the component dimensions by the furnace-geometry. During the joining process, the heated area can be limited to the seam area so that this technology can also be used to encapsulate materials with a low melting point. The seam has a high mechanical strength, it is resistant to a wide range of chemicals and radiation and it is also vacuum-tight. The temperature resistance can be varied by variation of the braze filler composition - usually between 1,400 C and >1,600 C. Beside the optimum filler it is also important to select the suitable laser wavelength. The paper will demonstrate the influence of different wave lengths, i. e. various laser types, on the seam quality. Examples are chosen to illustrate the strengths and limitations of the new technology

  13. A Value-Engaged Approach for Evaluating the Bunche-Da Vinci Learning Academy

    Science.gov (United States)

    Greene, Jennifer C.

    2005-01-01

    In 2001, the Bunche Academy was chosen by its district to join in partnership with the Da Vinci Learning Corporation to embark on an ambitious whole-school reform initiative, especially designed by the corporation for low-performing schools. In this chapter, the author describes how, as illustrated in the Bunche-Da Vinci Learning Academy context,…

  14. Frequency of joined disabilities of children with cerebral palsy in Tuzla canton

    Directory of Open Access Journals (Sweden)

    Mirela Babajić

    2013-12-01

    Full Text Available Introduction: Cerebral palsy (CP connotes a group of non-progressive, but often variable symptoms of motor impairment of movement and posture, as well as other impairments which are a consequenceof anomalies or brain impairment in different phases of its development. CP is a pathological condition characterised in the fi rst place by motor function impairment to which other disorders such as: visual andhearing impairment, intellectual defi cit, emotional problems, behaviour disorder, speech disorder, epileptic seizure and similar can join. The aim of this study is to determine frequency of joined disabilities ofchildren with cerebral palsy in Tuzla Canton.Methods: The research covers a total sample of 48 examinees, chronological age from 2-19 years, in Tuzla Canton. Research instrument was a Structural Questionnaire for the parents of children and adolescentswith cerebral palsy. Research data were processed by nonparametric statistics method. Basic statistical parameters of frequency and percentages were calculated, and tabular presentation was made.Results: After classification of examinees as per frequency of joined disabilities was done, work results have shown that speech impairment occurred with 35.4 % of children, visual impairment 33.3 %, epilepsy29.3 %, whereas hearing impairment occurred with 2 % of children.Conclusion: In research of frequency of joined disabilities of children with cerebral palsy in Tuzla Canton, most expressed are speech and visual disorders with children, then epilepsy, whereas a small percentageof children are with hearing disorder.

  15. Joining SiC/SiC composites for fusion applications

    International Nuclear Information System (INIS)

    Henager, C.J.

    2007-01-01

    Full text of publication follows: The use of SiC-reinforced composites for fusion reactors or other nuclear applications will likely require some form of joining in order to form large structural or functional sections. Joints must be able to allow load transfer to the composite material so that the fiber reinforcements are able to carry their designed loads and the joint should not fail in a brittle manner. In addition, joints must be tolerant of radiation damage similar to the composite material to maintain the structural integrity of the joined section. Other requirements of interest are low activation joints and ease of joining application and processing, which are a difficult set of criteria to meet. Research at PNNL has been directed at high-strength joints using solid-state displacement reactions and pre-ceramic polymer joints that are easy to apply and that could be used in field repair situations. This research will report on the further development and testing of such joints using a double notch shear (DNS) specimen that is suitable for in-reactor testing. The results reveal that the solid-state joints are stronger than the polymer-based joints but require high-temperature, high-pressure processing. The polymer-based joints can be applied with reduced pressure and temperature processing compared to the solid-state joints. The polymer-based joints may have adequate strength for some applications where ease of application and in situ processing are required. Although irradiation testing is not reported in this study the use of the DNS specimen is discussed with regard to future neutron irradiations. (authors)

  16. Factor analysis of the Mayo-Portland Adaptability Inventory: structure and validity.

    Science.gov (United States)

    Bohac, D L; Malec, J F; Moessner, A M

    1997-07-01

    Principal-components (PC) factor analysis of the Mayo-Portland Adaptability Inventory (MPAI) was conducted using a sample of outpatients (n = 189) with acquired brain injury (ABI) to evaluate whether outcome after ABI is multifactorial or unifactorial in nature. An eight-factor model was derived which explained 64-4% of the total variance. The eight factors were interpreted as representing Activities of Daily Living, Social Initiation, Cognition, Impaired-Self-awareness/Distress, Social Skills/ Support, Independence, Visuoperceptual, and Psychiatric, respectively. Validation of the Cognition factor was supported when factor scores were correlated with various neuropsychological measures. In addition, 117 patient self-rating total scores were used to evaluate the Impaired Self-awareness/Distress factor. An inverse relationship was observed, supporting this factor's ability to capture the two-dimensional phenomena of diminished self-awareness or enhanced emotional distress. A new subscale structure is suggested, that may allow greater clinical utility in understanding how ABI manifests in patients, and may provide clinicians with a better structure for implementing treatment strategies to address specific areas of impairment and disability for specific patients. Additionally, more precise measurement of treatment outcomes may be afforded by this reorganization.

  17. Study on the Joining Strength of Spot Welding using POMISPOT Device

    International Nuclear Information System (INIS)

    Mohd Azhar Ahmad; Siti Aiasah Hashim; Mohd Rizal Chulan

    2015-01-01

    Welding is a process to join metals. Spot welding is commonly used for specific purposes such joining in small areas or making temporary joints. POMISPOT is a spot welder that was designed and built by the ADC group, using capacitive resistance method. This study was made to obtain the welding strength that can be made by this spot welder. The study used stainless steel pieces of different thickness and by varying the applied voltage. The strength of welded pieces is tested by applying loads. The relationship between the thickness, voltage and welding strength will be used as the basis of specifications of this tool. (author)

  18. Activities of HIP joining of plasma-facing armors in the blanket first-wall in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yang-Il, E-mail: yijung@kaeri.re.kr [Korea Atomic Energy Research Institute, Daedeok-daero, Daejeon 34057 (Korea, Republic of); Park, Jeong-Yong; Choi, Byoung-Kwon; Lee, Jung-Suk; Kim, Hyun-Gil; Park, Dong-Jun; Park, Jung-Hwan; Kim, Suk-Kwon; Lee, Dong-Won [Korea Atomic Energy Research Institute, Daedeok-daero, Daejeon 34057 (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Gwahak-ro, Yuseong, Daejeon 34133 (Korea, Republic of)

    2016-11-01

    Highlights: • HIP joints of Be/CuCrZr, Be/FMS, W/FMS were demonstrated. • The process conditions for HIP joining were developed. • For the joining of Be, coating interlayers as well as thick diffusion barrier was developed. • For the joining of W, double-staged HIP was applied for the joint integrity. • No significant defects nor a brittle failure were observed along the joint interface. - Abstract: Joining technology for dissimilar materials was developed for the fabrication of an ITER blanket first-wall, which consisted of Be, CuCrZr, and stainless steel (SS). The Be/CuCrZr/SS joint was fabricated using a hot isostatic pressing (HIP) method. Beryllium armor was joined to the CuCrZr/SS block at 580 °C under 100 MPa. The optimal interlayer coatings of Cr/Cu and Ti/Cr/Cu were developed using an ion-beam assisted physical vapor deposition. Beryllium is also a candidate armor material for the TBM first-wall. Successful joining of Be to ferritic-martensitic steel (FMS) was accomplished using an HIP method by introducing the thick diffusion barrier. A thick diffusion barrier of a Cu foil(10 μm) limited the excessive diffusion and prevented the formation of brittle phases at the Be/FMS interface. Be and FMS were bonded at 650–850 °C; however, a temperature of lower than 750 °C was recommended to avoid material degradation of FMS. In addition, the joining of W to FMS has been developed. Tungsten is another armor material applicable to more severe plasma conditions. The large difference in the thermal expansion between W and FMS was resolved by introducing the Ti interlayer and Mo separator. Moreover, the double-staged HIP (the first stage at 900 °C and 100 MPa and the second stage at 750 °C and 70 MPa) was applied to suppress the edge delamination of W/FMS joints during thermal history.

  19. Learning Problems among Male and Female First Year ...

    African Journals Online (AJOL)

    There has been the observation that fresh students in their first year in the university encounter some learning problems. Specific problems investigated in this work include those of concentration ability, memory ability, study time management ability, attention problems, ability to join other students in study group work and ...

  20. Performance Comparison of the Optimized Inverted Joined Wing Airplane Concept and Classical Configuration Airplanes

    Directory of Open Access Journals (Sweden)

    Sieradzki Adam

    2016-09-01

    Full Text Available The joined wing concept is an unconventional airplane configuration, known since the mid-twenties of the last century. It has several possible advantages, like reduction of the induced drag and weight due to the closed wing concept. The inverted joined wing variant is its rarely considered version, with the front wing being situated above the aft wing. The following paper presents a performance prediction of the recently optimized configuration of this airplane. Flight characteristics obtained numerically were compared with the performance of two classical configuration airplanes of similar category. Their computational fluid dynamics (CFD models were created basing on available documentation, photographs and some inverse engineering methods. The analysis included simulations performed for a scale of 3-meter wingspan inverted joined wing demonstrator and also for real-scale manned airplanes. Therefore, the results of CFD calculations allowed us to assess the competitiveness of the presented concept, as compared to the most technologically advanced airplanes designed and manufactured to date. At the end of the paper, the areas where the inverted joined wing is better than conventional airplane were predicted and new research possibilities were described.

  1. Joining technology—A challenge for the use of SiC components in HTRs

    Energy Technology Data Exchange (ETDEWEB)

    Herrmann, M., E-mail: marion.herrmann@tu-dresden.de; Meisel, P.; Lippmann, W.; Hurtado, A.

    2016-09-15

    The availability of suitable joining technologies is paramount to the further advancement of ceramic components and their use in HTRs. Among other joining technologies, a modified brazing technology using a laser beam for heating the components to be joined has been developed at TU Dresden. The laser-induced heating behavior of the ceramic material is determined by the interactions between the material and the laser beam. This was shown in two different silicon carbide materials (SSiC and SiC{sub f}-reinforced ceramic material) using a diode laser with wavelengths 808 nm and 940 nm. The laser-based technique was illustrated by three different examples: sealing of monolithic SiC with a pin configuration for fuel claddings, sealing of SiC heat pipes with a length of 1 m, and demonstration of the transferability of the laser technique to fiber-reinforced components by means of a SiC{sub f}/SiCN material. Because the covalent bonding of SiC does not allow conventional welding, much research has been devoted to developing alternative filler systems. Glass or glass–ceramic fillers enable the tailoring of properties such as CTE and viscosity. Glasses are thermally stable up to their glass transition temperatures. It was shown that the crystallization of the yttrium aluminosilicate glass composition of the present work allows it to be used at 1050 °C without any significant changes occurring in braze tightness. For the SiC heat pipes with sodium as the working fluid, a sodium-resistant metal braze consisting of Ni–Ti–Si was formed. The long-term resistance of this filler to sodium at 800 °C was proven. The results demonstrate the possibility of using the laser-based joining technique for the joining of different SiC materials as well as for different brazing materials.

  2. Las madres de Plaza de Mayo: à memória do sangue, o legado ao revés

    OpenAIRE

    Maria Fernanda Garbero de Aragão Ponzio

    2009-01-01

    O contexto da Argentina da década de setenta é o cenário de personagens e narrativas que emergem do medo e permanecem, até os dias atuais, em posições de resistência e enfrentamento. Nessa paisagem marcada pela opressão do Estado militar, nascem as Madres de Plaza de Mayo, originadas pela tragédia do desaparecimento forçado de seus filhos. Investidas pela maternidade, elas rompem com a esfera privada para desestabilizar a esfera pública e questionar a memória de um país maculad...

  3. Streptococo del grupo B en mujeres embarazadas atendidas en el Centro de Salud Primero de Mayo. Abril-Agosto 2007

    OpenAIRE

    Dubón Méndez, Nancy; Altamirano González, Marjorie del Socorro; Alemán Rivera, Teresa de Jesús

    2008-01-01

    Streptococos del grupo B (SGB) es una de las principales causas de muertes neonatales en todo el mundo y esta directamente relacionada con la colonización materna al momento del parto. Se realizó un estudio descriptivo de corte transversal que incluyó un total de 120 mujeres embarazadas atendidas en el Centro de Salud 1ro. de mayo-León, con el objetivo de identificar la frecuencia de streptococo del grupo B, debido a que la identificación de esta bacteria influye positivamente en la prevenció...

  4. Laser direct joining of metal and plastic

    International Nuclear Information System (INIS)

    Katayama, Seiji; Kawahito, Yousuke

    2008-01-01

    We have developed an innovative rapid laser direct joining process of metal and plastic lap plates without adhesives or glues. The joints made between a Type 304 stainless steel plate and a polyethylene terephthalate (PET) plastic sheet of 30 mm width possessed tensile shear loads of about 3000 N. Transmission electron microscope photographs of the joint demonstrated that Type 304 and the PET were bonded on the atomic, molecular or nanostructural level through a Cr oxide film

  5. Summary of Prior Work on Joining of Oxide Dispersion-Strengthened Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Ian G [ORNL; Tatlock, Gordon J [ORNL; Badairy, H. [University of Liverpool; Chen, C-L. [University of Liverpool

    2009-08-01

    There is a range of joining techniques available for use with ODS alloys, but care should be exercised in matching the technique to the final duty requirements of the joint. The goal for joining ODS alloys is a joint with no local disruption of the distribution of the oxide dispersion, and no significant change in the size and orientation of the alloy microstructure. Not surprisingly, the fusion welding processes typically employed with wrought alloys produce the least satisfactory results with ODS alloys, but some versions, such as fusion spot welding, and the laser and electron-beam welding technologies, have demonstrated potential for producing sound joints. Welds made using solid-state spot welding reportedly have exhibited parent metal properties. Thus, it is possible to employ processes that result in significant disruption of the alloy microstructure, as long as the processing parameters are adjustment to minimize the extent of or influence of the changes in the alloy microstructure. Selection among these joining approaches largely depends on the particular application and component configuration, and an understanding of the relationships among processing, alloy microstructure, and final properties is key. Recent developments have resulted in friction welding evolving to be a prime method for joining ODS sheet products, and variants of brazing/diffusion bonding have shown excellent promise for use with tubes and pipes. The techniques that come closest to the goal defined above involve solid-state diffusion bonding and, in particular, it has been found that secondary recrystallization of joints made by pulsed plasma-assisted diffusion can produce the desired, continuous, large alloy grain structure through the joint. Such joints have exhibited creep rupture failure at >82% of the load needed to fail the monolithic parent alloy at 1000 C.

  6. Use of Friction Stir Welding and Friction Stir Processing for Advanced Nuclear Fuels and Materials Joining Applications

    International Nuclear Information System (INIS)

    J. I. Cole; J. F. Jue

    2006-01-01

    Application of the latest developments in materials technology may greatly aid in the successful pursuit of next generation reactor and transmutation technologies. One such area where significant progress is needed is joining of advanced fuels and materials. Rotary friction welding, also referred to as friction stir welding (FSW), has shown great promise as a method for joining traditionally difficult to join materials such as aluminum alloys. This relatively new technology, first developed in 1991, has more recently been applied to higher melting temperature alloys such as steels, nickel-based and titanium alloys. An overview of the FSW technology is provided and two specific nuclear fuels and materials applications where the technique may be used to overcome limitations of conventional joining technologies are highlighted

  7. Retrieval of Spatial Join Pattern Instances from Sensor Networks

    DEFF Research Database (Denmark)

    Yiu, Man Lung; Mamoulis, Nikos; Bakiras, Spiridon

    2009-01-01

    We study the continuous evaluation of spatial join queries and extensions thereof, defined by interesting combinations of sensor readings (events) that co-occur in a spatial neighborhood. An example of such a pattern is "a high temperature reading in the vicinity of at least four high-pressure re...

  8. Joining of SiC ceramics and SiC/SiC composites

    Energy Technology Data Exchange (ETDEWEB)

    Rabin, B.H. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1996-08-01

    This project has successfully developed a practical and reliable method for fabricating SiC ceramic-ceramic joints. This joining method will permit the use of SiC-based ceramics in a variety of elevated temperature fossil energy applications. The technique is based on a reaction bonding approach that provides joint interlayers compatible with SiC, and excellent joint mechanical properties at temperatures exceeding 1000{degrees}C. Recent emphasis has been given to technology transfer activities, and several collaborative research efforts are in progress. Investigations are focusing on applying the joining method to sintered {alpha}-SiC and fiber-reinforced SiC/SiC composites for use in applications such as heat exchangers, radiant burners and gas turbine components.

  9. Georneys joins AGU's blog network

    Science.gov (United States)

    Viñas, Maria-José

    2011-07-01

    A blog on geological musings, wanderings, and adventures, called Georneys, has joined AGU's network of Earth and space science blogs. With the addition of Georneys, on 11 July, the AGU Blogosphere (http://blogs.agu.org), as the network is known, has grown to showcase eight independent blogs since its launch last fall. “One reason I write this blog is to maintain my sanity as I finish up my Ph.D. In the midst of much stress, long days in lab, and long nights writing thesis chapters, I write to remind myself of why I love geology,” says Georneys blogger Evelyn Mervine. “I also write to document some of my geological adventures and to share my love of geology with others.”

  10. Using and joining a franchised private sector provider network in Myanmar.

    Science.gov (United States)

    O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

    2011-01-01

    Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor.

  11. Joining and Performance of Alkali Metal Thermal-to-electric Converter (AMTEC)

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Min-Soo; Lee, Wook-Hyun; Woo, Sang-Kuk [Korea Institute of Energy Research, Daejeon (Korea, Republic of)

    2017-07-15

    The alkali-Metal Thermal-to-electric Converter (AMTEC) is one of the promising static energy conversion technologies for the direct conversion of thermal energy to electrical energy. The advantages over a conventional energy converter are its high theoretical conversion efficiency of 40% and power density of 500 W/kg. The working principle of an AMTEC battery is the electrochemical reaction of the sodium through an ion conducting electrolyte. Sodium ion pass through the hot side of the beta”-alumina solid electrolyte (BASE) primarily as a result of the pressure difference. This pressure difference across the BASE has a significant effect on the overall performance of the AMTEC system. In order to build the high pressure difference across the BASE, hermeticity is required for each joined components for high temperature range of 900°C. The AMTEC battery was manufactured by utilizing robust joining technology of BASE/insulator/metal flange interfaces of the system for both structural and electrical stability. The electrical potential difference between the anode and cathode sides, where the electrons emitted from sodium ionization and recombined into sodium, was characterized as the open-circuit voltage. The efforts of technological improvement were concentrated on a high-power output and conversion efficiency. This paper discusses about the joining and performance of the AMTEC systems.

  12. Using and joining a franchised private sector provider network in Myanmar.

    Directory of Open Access Journals (Sweden)

    Kathryn O'Connell

    Full Text Available BACKGROUND: Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. METHODS AND FINDINGS: Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor.

  13. Using and Joining a Franchised Private Sector Provider Network in Myanmar

    Science.gov (United States)

    O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

    2011-01-01

    Background Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Methods and Findings Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor. PMID:22180781

  14. Postradiation sarcoma of bone: review of 78 Mayo Clinic cases

    International Nuclear Information System (INIS)

    Weatherby, R.P.; Dahlin, D.C.; Ivins, J.C.

    1981-01-01

    Postradiation sarcoma of bone is an uncommon but serious sequela of radiation therapy. Seventy-eight Mayo Clinic patients have been treated for sarcomas arising in irradiated bones. They received their initial radiotherapy for a wide variety of nonneoplastic and neoplastic conditions, both benign and malignant. Thirty-five sarcomas arose in bone that was normal at the time of radiotherapy, and 43 arose in irradiated preexisting osseous lesions. The latent period between radiotherapy and diagnosis of sarcoma averaged 14.3 years. Ninety percent of the postradiation sarcomas were either osteosarcomas or fibrosarcomas; chondrosarcoma, malignant (fibrous) histiocytoma, malignant lymphoma, Ewing's tumor, and metastasizing chondroblastoma also occurred. Prompt radical surgery, when feasible, is usually the treatment of choice for the sarcoma. About 30% of patients with sarcomas of the extremities or craniofacial bones survived 5 years without recurrence; there were no disease-free survivors among patients with tumors of the vertebral column, pelvis, or shoulder girdle. The low risk of sarcoma following radiotherapy for the treatment of cancer should not be a contraindication to its use in these patients; however, radiation therapy for benign bone tumors should be reserved for lesions that are not amenable to surgical treatment. An unusual case is also reported herein in which a fibrosarcoma was discovered in the humerus of a patient who had received radiotherapy 55 years previously for a verified osteosarcoma in the same site

  15. Postradiation sarcoma of bone: review of 78 Mayo Clinic cases

    Energy Technology Data Exchange (ETDEWEB)

    Weatherby, R.P.; Dahlin, D.C.; Ivins, J.C.

    1981-05-01

    Postradiation sarcoma of bone is an uncommon but serious sequela of radiation therapy. Seventy-eight Mayo Clinic patients have been treated for sarcomas arising in irradiated bones. They received their initial radiotherapy for a wide variety of nonneoplastic and neoplastic conditions, both benign and malignant. Thirty-five sarcomas arose in bone that was normal at the time of radiotherapy, and 43 arose in irradiated preexisting osseous lesions. The latent period between radiotherapy and diagnosis of sarcoma averaged 14.3 years. Ninety percent of the postradiation sarcomas were either osteosarcomas or fibrosarcomas; chondrosarcoma, malignant (fibrous) histiocytoma, malignant lymphoma, Ewing's tumor, and metastasizing chondroblastoma also occurred. Prompt radical surgery, when feasible, is usually the treatment of choice for the sarcoma. About 30% of patients with sarcomas of the extremities or craniofacial bones survived 5 years without recurrence; there were no disease-free survivors among patients with tumors of the vertebral column, pelvis, or shoulder girdle. The low risk of sarcoma following radiotherapy for the treatment of cancer should not be a contraindication to its use in these patients; however, radiation therapy for benign bone tumors should be reserved for lesions that are not amenable to surgical treatment. An unusual case is also reported herein in which a fibrosarcoma was discovered in the humerus of a patient who had received radiotherapy 55 years previously for a verified osteosarcoma in the same site.

  16. Smells familiar: group-joining decisions of predatory mites are mediated by olfactory cues of social familiarity.

    Science.gov (United States)

    Muleta, Muluken G; Schausberger, Peter

    2013-09-01

    Group-living animals frequently have to trade off the costs and benefits of leaving an established group and joining another group. Owing to their high fitness relevance, group-joining decisions are commonly nonrandom and may be based on traits of both individual members and the group such as life stage, body size, social status and group density or size, respectively. Many group-living animals are able to recognize and to associate preferentially with familiar individuals, i.e. those encountered before. Hence, after dispersing from established groups, animals commonly have to decide whether to join a new familiar or unfamiliar group. Using binary choice situations we assessed the effects of social familiarity on group-joining behaviour of the plant-inhabiting predatory mite Phytoseiulus persimilis . Group living in P. persimilis is brought about by the patchy distribution of its spider mite prey and mutual conspecific attraction. In the first experiment, gravid predator females given a choice between spider mite patches occupied by unfamiliar and familiar groups of females strongly preferred to join familiar groups and to deposit their eggs in these patches. Preference for socially familiar groups was robust across biases of spider mite prey densities between choice options. The second experiment revealed that the predatory mite females can smell social familiarity from a distance. Females subjected to odour choice situations in artificial cages were more strongly attracted to the odour of familiar than unfamiliar groups. We argue that P. persimilis females preferentially join socially familiar groups because a familiar social environment relaxes competition and optimizes foraging and reproduction.

  17. Smells familiar: group-joining decisions of predatory mites are mediated by olfactory cues of social familiarity☆

    Science.gov (United States)

    Muleta, Muluken G.; Schausberger, Peter

    2013-01-01

    Group-living animals frequently have to trade off the costs and benefits of leaving an established group and joining another group. Owing to their high fitness relevance, group-joining decisions are commonly nonrandom and may be based on traits of both individual members and the group such as life stage, body size, social status and group density or size, respectively. Many group-living animals are able to recognize and to associate preferentially with familiar individuals, i.e. those encountered before. Hence, after dispersing from established groups, animals commonly have to decide whether to join a new familiar or unfamiliar group. Using binary choice situations we assessed the effects of social familiarity on group-joining behaviour of the plant-inhabiting predatory mite Phytoseiulus persimilis. Group living in P. persimilis is brought about by the patchy distribution of its spider mite prey and mutual conspecific attraction. In the first experiment, gravid predator females given a choice between spider mite patches occupied by unfamiliar and familiar groups of females strongly preferred to join familiar groups and to deposit their eggs in these patches. Preference for socially familiar groups was robust across biases of spider mite prey densities between choice options. The second experiment revealed that the predatory mite females can smell social familiarity from a distance. Females subjected to odour choice situations in artificial cages were more strongly attracted to the odour of familiar than unfamiliar groups. We argue that P. persimilis females preferentially join socially familiar groups because a familiar social environment relaxes competition and optimizes foraging and reproduction. PMID:24027341

  18. Influence of friction stir welding parameters on titanium-aluminum heterogeneous lap joining configuration

    Science.gov (United States)

    Picot, Florent; Gueydan, Antoine; Hug, Éric

    2017-10-01

    Lap joining configuration for Friction Stir Welding process is a methodology mostly dedicated to heterogeneous bonding. This welding technology was applied to join pure titanium with pure aluminum by varying the rotation speed and the movement speed of the tool. Regardless of the process parameters, it was found that the maximum strength of the junction remains almost constant. Microstructural observations by means of Scanning Electron Microscopy and Energy Dispersive Spectrometry analysis enable to describe the interfacial join and reveal asymmetric Cold Lap Defects on the sides of the junction. Chemical analysis shows the presence of one exclusive intermetallic compound through the interface identified as TiAl3. This compound is responsible of the crack spreading of the junction during the mechanical loading. The original version of this article supplied to AIP Publishing contained an accidental inversion of the authors, names. An updated version of this article, with the authors names formatted correctly was published on 20 October 2017.

  19. Optimizing main-memory join on modern hardware

    OpenAIRE

    Boncz, Peter; Manegold, Stefan; Kersten, Martin

    2002-01-01

    textabstractIn the past decade, the exponential growth in commodity CPUs speed has far outpaced advances in memory latency. A second trend is that CPU performance advances are not only brought by increased clock rate, but also by increasing parallelism inside the CPU. Current database systems have not yet adapted to these trends, and show poor utilization of both CPU and memory resources on current hardware. In this article, we show how these resources can be optimized for large joins and tra...

  20. Comparative analysis of different joining techniques to improve the passive fit of cobalt-chromium superstructures.

    Science.gov (United States)

    Barbi, Francisco C L; Camarini, Edevaldo T; Silva, Rafael S; Endo, Eliana H; Pereira, Jefferson R

    2012-12-01

    The influence of different joining techniques on passive fit at the interface structure/abutment of cobalt-chromium (Co-Cr) superstructures has not yet been clearly established. The purpose of this study was to compare 3 different techniques of joining Co-Cr superstructures by measuring the resulting marginal misfit in a simulated prosthetic assembly. A specially designed metal model was used for casting, sectioning, joining, and measuring marginal misfit. Forty-five cast bar-type superstructures were fabricated in a Co-Cr alloy and randomly assigned by drawing lots to 3 groups (n=15) according to the joining method used: conventional gas-torch brazing (G-TB), laser welding (LW), and tungsten inert gas welding (TIG). Joined specimens were assembled onto abutment analogs in the metal model with the 1-screw method. The resulting marginal misfit was measured with scanning electron microscopy (SEM) at 3 different points: distal (D), central (C), and mesial (M) along the buccal aspect of both abutments: A (tightened) and B (without screw). The Levene test was used to evaluate variance homogeneity and then the Welsch ANOVA for heteroscedastic data (α=.05). Significant differences were found on abutment A between groups G-TB and LW (P=.013) measured mesially and between groups G-TB and TIG (P=.037) measured centrally. On abutment B, significant differences were found between groups G-TB and LW (Plaser method. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  1. Factors Influencing Provision of Play and Learning Materials among Children with Physical Challenges. A Case Study of Joytown Special School, Kiambu County

    Science.gov (United States)

    Muthoni, Kamau Joyce

    2016-01-01

    In Kenya there is still a high population of children either born with or who develop physical challenges. These children are often neglected and most do not join school at the expected age. In joining school they encounter several difficulties in their play and learning activities. These children with physical challenges have developmental needs…

  2. Medieval Day at Reynolds: An Interdisciplinary Learning Event

    Science.gov (United States)

    Morrison, Nancy S.

    2012-01-01

    Medieval Day at Reynolds turned a typical Friday class day into an interdisciplinary learning event, which joined faculty and students into a community of learners. From classrooms issued tales of Viking and Mongol conquests, religious crusaders, deadly plague, and majestic cathedrals and art, all told by costumed faculty members with expertise in…

  3. Blogging for educators writing for professional learning

    CERN Document Server

    Sackstein, Starr

    2015-01-01

    Join the education blogosphere with this easy, go-to guide! This engaging, all-in-one resource from expert blogger Starr Sackstein takes educators by the hand and guides them through the easy, step-by-step process of blogging. You'll quickly turn snippets of writing time into a tool for reflective and collaborative professional growth. With instructive sample blog posts from sites like Blogger and Wordpress and generous examples and resource listings, this guide helps busy educators learn: The value of blogging for professional learning Best practices for safe digital citizenship How to deal w

  4. Turbo Charge CPU Utilization in Fork/Join Using the ManagedBlocker

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Fork/Join is a framework for parallelizing calculations using recursive decomposition, also called divide and conquer. These algorithms occasionally end up duplicating work, especially at the beginning of the run. We can reduce wasted CPU cycles by implementing a reserved caching scheme. Before a task starts its calculation, it tries to reserve an entry in the shared map. If it is successful, it immediately begins. If not, it blocks until the other thread has finished its calculation. Unfortunately this might result in a significant number of blocked threads, decreasing CPU utilization. In this talk we will demonstrate this issue and offer a solution in the form of the ManagedBlocker. Combined with the Fork/Join, it can keep parallelism at the desired level.

  5. Performance Comparison of the Optimized Inverted Joined Wing Airplane Concept and Classical Configuration Airplanes

    OpenAIRE

    Sieradzki Adam; Dziubiński Adam; Galiński Cezary

    2016-01-01

    The joined wing concept is an unconventional airplane configuration, known since the mid-twenties of the last century. It has several possible advantages, like reduction of the induced drag and weight due to the closed wing concept. The inverted joined wing variant is its rarely considered version, with the front wing being situated above the aft wing. The following paper presents a performance prediction of the recently optimized configuration of this airplane. Flight characteristics obtaine...

  6. The Minimal Clinically Important Difference for the Mayo-Portland Adaptability Inventory.

    Science.gov (United States)

    Malec, James F; Kean, Jacob; Monahan, Patrick O

    To determine the Minimal Clinically Important Difference (MCID) and Robust Clinically Important Difference (RCID) of the Mayo-Portland Adaptability Inventory-4 (MPAI-4) as measures of response to intervention. Retrospective analysis of existing data. Both distribution- and anchor-based methods were used to triangulate on the MCID and to identify a moderate, that is, more robust, level of change (RCID) for the MPAI-4. These were further evaluated with respect to clinical provider ratings. Data for individuals with acquired brain injury in rehabilitation programs throughout the United States in the OutcomeInfo Database (n = 3087) with 2 MPAI-4 ratings. MPAI-4, Supervision Rating Scale, Clinician Rating of Global Clinical Improvement. Initial analyses suggested 5 T-score points (5T) as the MCID and 9T as the RCID. Eighty-one percent to 87% of clinical raters considered a 5T change and 99% considered a 9T change to indicate meaningful improvement. 5T represents the MCID for the MPAI-4 and 9T, the RCID. Both values are notably less than the Reliable Change Index (RCI). While the RCI indicates change with a high level of statistical confidence, it may be insensitive to change that is considered meaningful by providers and participants as indicated by the MCID.

  7. Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

    International Nuclear Information System (INIS)

    Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y.

    2014-01-01

    A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets

  8. Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

    Energy Technology Data Exchange (ETDEWEB)

    Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y. [Chungbuk National University, Cheongju (Korea, Republic of)

    2014-07-15

    A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets.

  9. POSSIBILITY OF PHARMACOMODULATION OF THE HYPERSENSITIVE RHINITIS JOINED WITH THE NASAL POLYPOSIS

    Directory of Open Access Journals (Sweden)

    Dejan Ursulović

    2001-11-01

    Full Text Available The research goai is to examine the effects of the local corticosteroidapplication to the number of eosinophils in the nasal secretion of the patients withhypersensitive rhinitis joined with the nasal polyposis. The study comprises 13patients with hypersensitive rhinitis joined with the nasal polyposis; 9 of them madeup the experimental group. The local corticosteroid (bechomethasone dipropionatein water spray was given at 12 hours in individual doses of 200 micrograms to theexperimental group patients in six weeks. During the treatment it was confirmed thatthere was a highly important reduction of the number of eosinophils of the nasalsecretion in the experimental group patients.

  10. Feasibility of ceramic joining with high energy electron beams

    International Nuclear Information System (INIS)

    Turman, B.N.; Glass, S.J.; Halbleib, J.A.; Helmich, D.R.; Loehman, R.E.; Clifford, J.R.

    1995-01-01

    Joining structural ceramics is possible using high melting point metals such as Mo and Pt that are heated with a high energy electron beam, with the potential for producing joints with high temperature capability. A 10 MeV electron beam can penetrate through 1 cm of ceramic, offering the possibility of buried interface joining. Because of transient heating and the lower heat capacity of the metal relative to the ceramic, a pulsed high power beam has the potential for melting the metal without decomposing or melting the adjacent ceramic. The authors have demonstrated the feasibility of the process with a series of 10 MeV, 1 kW electron beam experiments. Shear strengths up to 28 NTa have been measured for Si 3 N 4 -Mo-Si 3 N 4 . These modest strengths are due to beam non-uniformity and the limited area of bonding. The bonding mechanism appears to be a thin silicide reaction layer. Si 3 N 4 -Si 3 N 4 joints with no metal layer were also produced, apparently bonded an yttrium apatite grain boundary phase

  11. Surface plasmon resonance assisted rapid laser joining of glass

    Energy Technology Data Exchange (ETDEWEB)

    Zolotovskaya, Svetlana A.; Tang, Guang; Abdolvand, Amin, E-mail: a.abdolvand@dundee.ac.uk [School of Engineering, Physics and Mathematics, University of Dundee, Dundee DD1 4HN (United Kingdom); Wang, Zengbo [School of Electronic Engineering, Bangor University, Bangor LL57 1UT (United Kingdom)

    2014-08-25

    Rapid and strong joining of clear glass to glass containing randomly distributed embedded spherical silver nanoparticles upon nanosecond pulsed laser irradiation (∼40 ns and repetition rate of 100 kHz) at 532 nm is demonstrated. The embedded silver nanoparticles were ∼30–40 nm in diameter, contained in a thin surface layer of ∼10 μm. A joint strength of 12.5 MPa was achieved for a laser fluence of only ∼0.13 J/cm{sup 2} and scanning speed of 10 mm/s. The bonding mechanism is discussed in terms of absorption of the laser energy by nanoparticles and the transfer of the accumulated localised heat to the surrounding glass leading to the local melting and formation of a strong bond. The presented technique is scalable and overcomes a number of serious challenges for a widespread adoption of laser-assisted rapid joining of glass substrates, enabling applications in the manufacture of microelectronic devices, sensors, micro-fluidic, and medical devices.

  12. Joining a discourse community: How graduate students learn to speak like astronomers

    Science.gov (United States)

    Baleisis, Audra

    Almost half of all graduate students leave their doctoral programs without finishing. Who leaves, taking which skills and strengths with them, is still poorly understood, however, because it is hard to measure exactly what graduate students learn in their doctoral programs. Since the expertise required of a PhD holder is highly dependent on discipline, the development of a better understanding of graduate education and attrition requires studying the process at the departmental level. This is a qualitative study of the cultural values and norms of academic astronomy, as transmitted through the socialization of graduate students in to giving talks, asking questions, and participating in departmental speaking events. This study also looks at the conflicts that arise when implicit cultural norms, which are practiced but remain unacknowledged, are inconsistent with the official, explicit values and norms for speaking in astronomy. Doctoral students and faculty members in a single astronomy department, at a large western university, filled out a short survey about the stakes involved in astronomy speaking events. A subset of these individuals was interviewed in- depth about the goals of, and their experiences with, five departmental speaking events: Coffee Hour, Journal Club, research talks, Thesis defense talks, and Colloquia. These interviewees were: (1) graduate students who had given a verbal presentation at one of these events, and (2) graduate students and faculty members who were in the audience at a graduate student's presentation. The desired outcomes which were expressed for these speaking events included: (1) lively, informal discussion among all participants, (2) increasing graduate student verbal participation in these events as they "learn to speak like astronomers," and (3) the utility of these events in helping graduate students learn and practice their speaking and reasoning skills related to astronomy research. In practice these goals were not achieved

  13. Advanced manufacturing technologies modern machining, advanced joining, sustainable manufacturing

    CERN Document Server

    2017-01-01

    This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

  14. Lipofection and nucleofection of substrate plasmid can generate widely different readings of DNA end-joining efficiency in different cell lines.

    Science.gov (United States)

    Magin, Simon; Saha, Janapriya; Wang, Minli; Mladenova, Veronika; Coym, Nadine; Iliakis, George

    2013-02-01

    In vivo plasmid end-joining assays are valuable tools for dissecting important qualitative and quantitative aspects of non-homologous end-joining (NHEJ)--a key mechanism for the repair of DNA double-strand breaks (DSBs) in higher eukaryotes. They enable the use of defined DNA ends as substrates for end-joining and the analysis by sequencing of the resulting junctions to identify the repair pathways engaged. Yet, plasmid assays have generated divergent results of end-joining capacity in the same DSB repair mutants when used under different conditions, which implies contributions from undefined and therefore uncontrolled parameters. To help standardize these assays, we searched for parameters underpinning these variations and identified transfection method as an important determinant. Here, we compare a lipid-based transfection method, lipofection, with an electroporation method, nucleofection, and find large, unanticipated and cell line-dependent differences in percent end-joining without recognizable trends. For example, in rodent cells, transfection using lipofection gives nearly WT end-joining in DNA-PKcs mutants and only mildly inhibited end-joining in Lig4 and Ku mutants. In contrast, transfection using nucleofection shows marked end-joining inhibition in all NHEJ mutants tested as compared to the WT. In human HCT116 cells, end-joining after nucleofection is strongly suppressed even in the WT and the differences to the mutants are small. After lipofection, in contrast, end-joining is high in WT cells and markedly suppressed in the mutants. We conclude that better understanding and control of the physicochemical/biological and analytical parameters underpinning these differences will be required to generate with plasmid assays results with quantitative power comparable to that of well-established methods of DSB analysis such as pulsed-field gel electrophoresis or γ-H2AX foci scoring. Until then, caution is needed in the interpretation of the results obtained

  15. HIP joining of Be/CuCrZr for fabrication of ITER first wall

    International Nuclear Information System (INIS)

    Park, Jeong-Yong; Choi, Byung-Kwon; Park, Sang-Yoon; Kim, Hyun-Gil; Kim, Jun-Hwan; Hong, Bong Guen; Jeong, Yong Hwan

    2007-01-01

    The effects of different interlayer types and the temperature have been investigated in order to optimize the HIP joining conditions of Be to CuCrZr. Ti/Cu and Cr/Cu interlayers were coated onto a Be surface before a HIP joining. HIP temperature was changed from 580 to 620 deg. C. No intermetallic compounds or defects were formed at the interface of the joint specimens. The joining strength measured by the four-point bend test and the shear test was higher in the joint specimen with Ti/Cu interlayers when compared to that with Cr/Cu interalyers and it was increased with an increase of the HIP temperature from 580 to 620 deg. C. The yield strength of the aged CuCrZr was higher than 150 MPa at 250 deg. C up to an aging temperature of 620 deg. C after a water quenching. It is therefore suggested that the HIP temperature of the Be/CuCrZr joint could be increased to 620 deg. C based on the results obtained from this study

  16. Mechanical and microstructural integrity of nickel-titanium and stainless steel laser joined wires

    International Nuclear Information System (INIS)

    Vannod, J.; Bornert, M.; Bidaux, J.-E.; Bataillard, L.; Karimi, A.; Drezet, J.-M.; Rappaz, M.; Hessler-Wyser, A.

    2011-01-01

    The biomedical industry shows increasing interest in the joining of dissimilar metals, especially with the aim of developing devices that combine different mechanical and corrosive properties. As an example, nickel-titanium shape memory alloys joined to stainless steel are very promising for new invasive surgery devices, such as guidewires. A fracture mechanics study of such joined wires was carried out using in situ tensile testing and scanning electron microscopy imaging combined with chemical analysis, and revealed an unusual fracture behaviour at superelastic stress. Nanoindentation was performed to determine the mechanical properties of the welded area, which were used as an input for mechanical computation in order to understand this unexpected behaviour. Automated image correlation allowed verification of the mechanical modelling and a reduced stress-strain model is proposed to explain the special fracture mechanism. This study reveals the fact that tremendous property changes at the interface between the NiTi base wire and the weld area have more impact on the ultimate tensile strength than the chemical composition variation across the welded area.

  17. Groundwork: Preparing an Effective Basis for Communication and Shared Learning in Design and Technology Education

    Science.gov (United States)

    Looijenga, Annemarie; Klapwijk, Remke; de Vries, Marc J.

    2016-01-01

    In Dutch Design and Technology Education the beginning of a process of learning is usually determined by the teacher. In this paper it is argued that a beginning, determined in interaction with the students, is more profitable as the interaction will lead to joined-up exploring, creating and thinking and an increased motivation to learn.…

  18. JOINING OF ECONOMIC ENTITIES AS A POSSIBILITY OF SURVIVAL ON THE MODERN MARKET

    Directory of Open Access Journals (Sweden)

    Nikolina Pavičić Rešetar

    2016-12-01

    Full Text Available In today's global market, a major challenge for every economic entity is to be competitive and achieve its objectives. The method of survival shows that those companies with the lowest costs will survive and remain on the market. G. J. Stigler explained this technique on the market share of different sized companies in the steel industry in the United States. In his method he groups enterprises by size (small, medium and large. Historically, it is known that economic entities have been joining together since the Middle Ages. At that time, traders who formed associations were not engaged only in trade, but also in transportation and monetary activity. Economic entities are still joining together today, mostly in the form of a cooperative, cluster, cooperation, public private partnership or holding. The reason for that lies in the reduction of costs, risks and competition and the possibility of increasing the capacity of economic entities. Also, it should be noted that there is a synergy effect when economic entities join together. We are witnesses of many failed businesses, which did not respond to the economic crisis and the needs of the market. The aim of this paper is to try to connect the technique of survival and joining of economic entities and show how a merger is one of the survival models that in conditions of economic crisis provides options to business entities. Only companies with the lowest costs and high-quality technology can survive and compete in today's market.

  19. Increasing FSW join strength by optimizing feed rate, rotating speed and pin angle

    Science.gov (United States)

    Darmadi, Djarot B.; Purnowidodo, Anindito; Siswanto, Eko

    2017-10-01

    Principally the join in Friction Stir Welding (FSW) is formed due to mechanical bonding. At least there are two factors determines the quality of this join, first is the temperature in the area around the interface and secondly the intense of mixing forces in nugget zone to create the mechanical bonding. The adequate temperature creates good flowability of the nugget zone and an intensive mixing force produces homogeneous strong bonding. Based on those two factors in this research the effects of feed rate, rotating speed and pin angle of the FSW process to the tensile strength of resulted join are studied. The true experimental method was used. Feed rate was varied at 24, 42, 55 and 74 mm/minutes and from the experimental results, it can be concluded that the higher feed rate decreases the tensile strength of weld join and it is believed due to the lower heat embedded in the material. Inversely, the higher rotating speed increases the join’s tensile strength as a result of higher heat embedded in base metal and higher mixing force in the nugget zone. The rotating speed were 1842, 2257 and 2904 RPMs. The pin angle determines the direction of mixing force. With variation of pin angle: 0°, 4°, 8° and 12° the higher pin angle generally increases the tensile strength because of more intensive mixing force. For 12° pin angle the lower tensile strength is found since the force tends to push out the nugget area from the joint gap.

  20. Development of joining techniques for fabrication of fuel rod simulators

    International Nuclear Information System (INIS)

    Moorhead, A.J.; McCulloch, R.W.; Reed, R.W.; Woodhouse, J.J.

    1980-10-01

    Much of the safety-related thermal-hydraulic tests on nuclear reactors are conducted not in the reactor itself, but in mockup segments of a core that uses resistance-heated fuel rod simulators (FRS) in place of the radioactive fuel rods. Laser welding and furnace brazing techniques are described for joining subassemblies for FRS that have survived up to 1000 h steady-state operation at 700 to 1100 0 C cladding temperatures and over 5000 thermal transients, ranging from 10 to 100 0 C/s. A pulsed-laser welding procedure that includes use of small-diameter filler wire is used to join one end of a resistance heating element of Pt-8 W, Fe-22 Cr-5.5 Al-0.5 Co, or 80 Ni-20 Cr (wt %) to a tubular conductor of an appropriate intermediate material. The other end of the heating element is laser welded to an end plug, which in turn is welded to a central conductor rod

  1. CuPb rheocast alloy as joining material for CFC composites

    Science.gov (United States)

    Salvo, M.; Lemoine, P.; Ferraris, M.; Appendino Montorsi, M.; Matera, R.

    1995-10-01

    High heat flux components for future use in thermonuclear fusion reactors are designed as layered structures. The assembling of the different parts (armour, heat sink and external structure) requires a joint which could withstand large heat loads and thermal stresses. In this paper we examined a 50 wt% PbCu rheocast alloy (RCA) as joining material for the armour/heat sink joint. The alloy was prepared in vacuum in a rotational furnace and was characterized by SEM-EDS analysis and heating microscopy. The obtained microstructure was globular as foreseen and it remained after prolonged heating at 650°C. The alloy showed very good ductility: sheets of about 200 μm were rolled starting from about 1 × 1 × 1 cm 3 cubes. The alloy was successful in joining both the armour and the heat sink materials, respectively, carbon fibre reinforced composites and copper. Initial mechanical testing shows that the technique is viable for the foreseen applications in the field of thermonuclear fusion reactors.

  2. Cu-Pb rheocast alloy as joining material for CFC composites

    International Nuclear Information System (INIS)

    Salvo, M.

    1995-01-01

    High heat flux components for future use in thermonuclear fusion reactors are designed as layered structures. The assembling of the different parts (armour, heat sink and external structure) requires a joint which could withstand large heat loads and thermal stresses. In this paper we examined a 50 wt% Pb-Cu rheocast alloy (RCA) as joining material for the armour/heat sink joint. The alloy was prepared in vacuum in a rotational furnace and was characterized by SEM-EDS analysis and heating microscopy. The obtained microstructure was globular as foreseen and it remained after prolonged heating at 650 C. The alloy showed very good ductility: sheets of about 200 μm were rolled starting from about 1x1x1 cm 3 cubes. The alloy was successful in joining both the armour and the heat sink materials, respectively, carbon fibre reinforced composites and copper. Initial mechanical testing shows that the technique is viable for the foreseen applications in the field of thermonuclear fusion reactors. (orig.)

  3. Self-healing of cracks in Ag joining layer for die-attachment in power devices

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chuantong, E-mail: chenchuantong@sanken.osaka-u.ac.jp; Nagao, Shijo; Suganuma, Katsuaki; Jiu, Jinting; Zhang, Hao; Sugahara, Tohru [Institute of Scientific and Industrial Research, Osaka University, Mihogaoka 8-1, Ibaraki, Osaka 567-0047 (Japan); Iwashige, Tomohito; Sugiura, Kazuhiko; Tsuruta, Kazuhiro [Research Division 3, Denso Corporation, Komenoki-cho, Minamiyama 500-1, Nissin, Aichi 470-0111 (Japan)

    2016-08-29

    Sintered silver (Ag) joining has attracted significant interest in power devices modules for its ability to form stable joints with a porous interconnection layer. A function for the self-healing of cracks in sintered porous Ag interlayers at high temperatures is discovered and reported here. A crack which was prepared on a Ag joining layer was closed after heating at 200 °C in air. The tensile strength of pre-cracked Ag joining layer specimens recovers to the value of non-cracked specimens after heating treatment. Transmission electron microscopy (TEM) was used to probe the self-healing mechanism. TEM images and electron diffraction patterns show that a large quantity of Ag nanoparticles formed at the gap with the size less than 10 nm, which bridges the crack in the self-healing process. This discovery provides additional motivation for the application of Ag as an interconnection material for power devices at high temperature.

  4. Morbidity and mortality pattern of hospitalized children with measles at mayo hospital, lahore (epidemic 2013)

    International Nuclear Information System (INIS)

    Javed, T.; Bibi, A.

    2014-01-01

    Major outbreak of measles took place in Punjab recently (2013), leading on to increase in hospitalized cases of measles in children wards, with unacceptably high morbidity and mortality. The aim of this study was to find out morbidity and mortality pattern of hospitalized cases of measles and associated factors. Design: Prospective case series conducted at Pediatric Department Mayo Hospital, Lahore for 7 months, i.e. from 1st Jan to 31st Jul 2013 Methods:A total of 628 cases of measles were admitted in the children ward, Unit II, Mayo Hospital, Lahore from Jan-Jul 2013. The diagnosis was assigned using WHO criteria. Cases were admitted through emergency on 24 hour basis and managed in HDU and Measles isolation section. Chest X-Ray and blood complete examination was done in all cases. Complications were noted and managed along with eye consultations where necessary. Data was recorded in a predesigned proforma and entered in computer. Results: 628 admitted cases were enrolled, with comparable sex distribution, having mean age 30.8+-26.25 months and mean weight 9.69+-4.14 Kg. Eighty three percent cases were below 6 years of age (33% <1 year), 71% cases were under weight and 68% were wasted (WHO classification). Sixty six percent cases had not received measles vaccination, 144 (23%) cases had received a single dose and 71 cases (12.2%) had received two doses before admission. Majority of cases belonged to Lahore city and its peri-urban areas (83%). Pneumonia (80%), diarrhea (37%), and encephalitis (7.7%) were common complications. Eye complications (corneal ulcers, keratitis, perforation and blindness) were seen in 7.3% cases. Being under weight, H/O improper measles immunization, presence of anemia, pneumonia and encephalitis were statistically significant risk factors for mortality. The case fatality rate was 8.76%. Conclusion:Recent Measles outbreak further highlights the importance of strengthening the need for routine and mass vaccination for all children. In a

  5. Joining and Integration of Silicon Nitride Ceramics for Aerospace and Energy Systems

    Science.gov (United States)

    Singh, M.; Asthana, R.

    2009-01-01

    Light-weight, creep-resistant silicon nitride ceramics possess excellent high-temperature strength and are projected to significantly raise engine efficiency and performance when used as turbine components in the next-generation turbo-shaft engines without the extensive cooling that is needed for metallic parts. One key aspect of Si3N4 utilization in such applications is its joining response to diverse materials. In an ongoing research program, the joining and integration of Si3N4 ceramics with metallic, ceramic, and composite materials using braze interlayers with the liquidus temperature in the range 750-1240C is being explored. In this paper, the self-joining behavior of Kyocera Si3N4 and St. Gobain Si3N4 using a ductile Cu-based active braze (Cu-ABA) containing Ti will be presented. Joint microstructure, composition, hardness, and strength as revealed by optical microscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Knoop microhardness test, and offset compression shear test will be presented. Additionally, microstructure, composition, and joint strength of Si3N4/Inconel 625 joints made using Cu-ABA, will be presented. The results will be discussed with reference to the role of chemical reactions, wetting behavior, and residual stresses in joints.

  6. Effect of epoxy resin on bending momentum in L type corner joins

    Directory of Open Access Journals (Sweden)

    Mehmet Nuri Yıldırım

    2017-11-01

    Full Text Available In the furniture industry, the joining points of frame and box construction furniture according to the loads to be affected by the use place is important for the security of the user and service life of the furniture element. In this direction, it is aimed to determine the diagonal compression and diagonal tensile moment values of "L" type corner joints of box framed construction furniture prepared from solid wood materials. The Pinus Nigra, Fagus Orientalis L and Populus Nigra were used as solid wood materials. Wood-based biscuit joining elements were used in corner joints of the test construction and epoxy resin was used as glue for materials. The static loads were applied to construction according to ASTM-D1037. The results show that, the highest tensile and compression values were obtained from Fagus Orientalis L and the lowest values were obtained from Populus Nigra specimens. In the statistical study, the difference between the tensile and compressive bending moment values of the biscuit connection element was found to be statistically significant. This study indicates that, it is suggested to use of L type joints prepared from Fagus Orientalis L by using epoxy resin and wood based biscuit joining element in frame constructions.

  7. Joining of beryllium by braze welding technique: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Banaim, P.; Abramov, E. [Ben-Gurion Univ. of the Negev, Beersheba (Israel); Zalkind, S.; Eden, S.

    1998-01-01

    Within the framework of some applications, there is a need to join beryllium parts to each other. Gas Tungsten Arc Braze Welds were made in beryllium using 0.3 mm commercially Aluminum (1100) shim preplaced at the joint. The welds exhibited a tendency to form microcracks in the Fusion Zone and Heat Affected Zone. All the microcracks were backfilled with Aluminum. (author)

  8. AUGMENTING 3D CITY MODEL COMPONENTS BY GEODATA JOINS TO FACILITATE AD-HOC GEOMETRIC-TOPOLOGICALLY SOUND INTEGRATION

    Directory of Open Access Journals (Sweden)

    R. Kaden

    2012-07-01

    Full Text Available Virtual 3D city models are integrated complex compositions of spatial data of different themes, origin, quality, scale, and dimensions. Within this paper, we address the problem of spatial compatibility of geodata aiming to provide support for ad-hoc integration of virtual 3D city models including geodata of different sources and themes like buildings, terrain, and city furniture. In contrast to related work which is dealing with the integration of redundant geodata structured according to different data models and ontologies, we focus on the integration of complex 3D models of the same representation (here: CityGML but regarding to the geometric-topological consistent matching of non-homologous objects, e.g. a building is connected to a road, and their geometric homogenisation. Therefore, we present an approach including a data model for a Geodata Join and the general concept of an integration procedure using the join information. The Geodata Join aims to bridge the lack of information between fragmented geodata by describing the relationship between adjacent objects from different datasets. The join information includes the geometrical representation of those parts of an object, which have a specific/known topological or geometrical relationship to another object. This part is referred to as a Connector and is either described by points, lines, or surfaces of the existing object geometry or by additional join geometry. In addition, the join information includes the specification of the connected object in the other dataset and the description of the topological and geometrical relationship between both objects, which is used to aid the matching process. Furthermore, the Geodata Join contains object-related information like accuracy values and restrictions of movement and deformation which are used to optimize the integration process. Based on these parameters, a functional model including a matching algorithm, transformation methods, and

  9. El valor de los servicios ambientales en la cuenca baja del río Mayo

    Directory of Open Access Journals (Sweden)

    Alma Angelina Haro Martínez

    2015-01-01

    Full Text Available en este trabajo se presentan los resultados de la valora-ción económica de los servicios ambientales, para la cuencabaja del río Mayo, en Sonora, en el noroeste de México,donde las actividades económicas han impactado severa-mente y sustituido los ecosistemas naturales en la mayorparte del territorio. La metodología utilizada consistió en ladelimitación de los servicios en función de su distribuciónespacial y, en algunos casos, se usaron componentes de losecosistemas como proxy. Se compararon nueve servicios,que abarcan los cuatro grupos de funciones ecosistémicas(regulación, soporte, provisión y cultural. Los cálculos sebasaron en valores estimados de mercado por servicio y porunidad de área. Esto generó nueve mapas individuales y unodonde se integra el valor total por unidad de área.

  10. An experimental study on joining of severe plastic deformed aluminium materials with friction welding method

    Energy Technology Data Exchange (ETDEWEB)

    Sahin, Mumin [Mechanical Engineering Department, Trakya University, 22030 Edirne (Turkey)], E-mail: mumins@trakya.edu.tr; Erol Akata, H.; Ozel, Kaan [Mechanical Engineering Department, Trakya University, 22030 Edirne (Turkey)

    2008-07-01

    In this study, 5083 aluminium alloys, which were exposed to severe plastic deformation, were joined with friction welding method and the variation in mechanical properties of the joints was experimentally investigated. Severe plastic deformation methods can be classified as equal channel angular pressing (ECAP) (in other words, equal cross section lateral extrusion - ECSLE) and cyclic extrusion-compression. Aluminium alloy as test material 5083 and square cross-sectional equal channel angular pressing die for severe plastic deformation were used in the study. Firstly 5083 alloys, as purchased, were joined with friction welding method. The optimum parameters for friction time, upset time, friction pressure and upset pressure, which are necessary for welding, were obtained. Afterwards, 5083 aluminium materials as purchased were prepared as square cross-section and then 1-pass severe plastic deformation was applied to specimen by equal channel angular pressing die. The obtained parts as square form were prepared as cylindrical form by machining and then the parts were joined by continuous drive friction welding equipment that was designed and produced in laboratory conditions before. Later, the tensile strengths of the parts, obtained at optimum conditions, were compared with those of the joined parts as purchased form. Then, hardness variations and microstructures of joints were examined. Finally, the obtained results were commented on.

  11. Nonhomologous DNA End Joining in Cell-Free Extracts

    Directory of Open Access Journals (Sweden)

    Sheetal Sharma

    2010-01-01

    Full Text Available Among various DNA damages, double-strand breaks (DSBs are considered as most deleterious, as they may lead to chromosomal rearrangements and cancer when unrepaired. Nonhomologous DNA end joining (NHEJ is one of the major DSB repair pathways in higher organisms. A large number of studies on NHEJ are based on in vitro systems using cell-free extracts. In this paper, we summarize the studies on NHEJ performed by various groups in different cell-free repair systems.

  12. Distinct DNA repair pathways involving RecA and nonhomologous end joining in Mycobacterium smegmatis.

    OpenAIRE

    Korycka-Machala, M; Brzostek, A; Rozalska, S; Rumijowska-Galewicz, A; Dziedzic, R; Bowater, R; Dziadek, J

    2006-01-01

    Mycobacterium smegmatis was used to study the relationship between DNA repair processes involving RecA and nonhomologous end joining (NHEJ). The effect of gene deletions in recA and/or in two genes involved in NHEJ (ku and ligD) was tested on the ability of bacteria to join breaks in plasmids transformed into them and in their response to chemicals that damage DNA. The results provide in vivo evidence that only NHEJ is required for the repair of noncompatible DNA ends. By contrast, the respon...

  13. Joining the Pieces: Using Concept Maps for Integrated Learning and Assessment in an Introductory Management Course

    Science.gov (United States)

    Connolly, Heather; Spiller, Dorothy

    2016-01-01

    This paper reports on and evaluates the use of concept mapping as a learning tool in a large first year Management course. The goal was to help students make personal sense of course learning and to build their understanding of links and relationships between key course ideas. Concept mapping was used for three summative assessment pieces,…

  14. Analytical and experimental evaluation of joining silicon carbide to silicon carbide and silicon nitride to silicon nitride for advanced heat engine applications Phase 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, G.J.; Vartabedian, A.M.; Wade, J.A.; White, C.S. [Norton Co., Northboro, MA (United States). Advanced Ceramics Div.

    1994-10-01

    The purpose of joining, Phase 2 was to develop joining technologies for HIP`ed Si{sub 3}N{sub 4} with 4wt% Y{sub 2}O{sub 3} (NCX-5101) and for a siliconized SiC (NT230) for various geometries including: butt joins, curved joins and shaft to disk joins. In addition, more extensive mechanical characterization of silicon nitride joins to enhance the predictive capabilities of the analytical/numerical models for structural components in advanced heat engines was provided. Mechanical evaluation were performed by: flexure strength at 22 C and 1,370 C, stress rupture at 1,370 C, high temperature creep, 22 C tensile testing and spin tests. While the silicon nitride joins were produced with sufficient integrity for many applications, the lower join strength would limit its use in the more severe structural applications. Thus, the silicon carbide join quality was deemed unsatisfactory to advance to more complex, curved geometries. The silicon carbide joining methods covered within this contract, although not entirely successful, have emphasized the need to focus future efforts upon ways to obtain a homogeneous, well sintered parent/join interface prior to siliconization. In conclusion, the improved definition of the silicon carbide joining problem obtained by efforts during this contract have provided avenues for future work that could successfully obtain heat engine quality joins.

  15. Effect of material flow on joint strength in activation spot joining of Al alloy and steel sheets

    International Nuclear Information System (INIS)

    Watanabe, Goro; Yogo, Yasuhiro; Takao, Hisaaki

    2014-01-01

    A new joining method for dissimilar metal sheets was developed where a rotated consumable rod of Al alloy is pressed onto an Al alloy sheet at the part overlapped with a mild steel sheet. The metal flow in the joining region is increased by the through-hole in the Al sheet and consumable Al rod. The rod creates the joint interface and pads out of the thinly joined parts through pressing. This produces a higher joint strength than that of conventional friction stir spot welding. Measurements of the joint interface showed the presence of a 5-10 nm thick amorphous layer consisting of Al and Mg oxides

  16. Thin shells joining local cosmic string geometries

    Energy Technology Data Exchange (ETDEWEB)

    Eiroa, Ernesto F. [Universidad de Buenos Aires, Ciudad Universitaria Pabellon I, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina); Instituto de Astronomia y Fisica del Espacio (IAFE, CONICET-UBA), Buenos Aires (Argentina); Rubin de Celis, Emilio; Simeone, Claudio [Universidad de Buenos Aires, Ciudad Universitaria Pabellon I, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina); Ciudad Universitaria Pabellon I, IFIBA-CONICET, Buenos Aires (Argentina)

    2016-10-15

    In this article we present a theoretical construction of spacetimes with a thin shell that joins two different local cosmic string geometries. We study two types of global manifolds, one representing spacetimes with a thin shell surrounding a cosmic string or an empty region with Minkowski metric, and the other corresponding to wormholes which are not symmetric across the throat located at the shell. We analyze the stability of the static configurations under perturbations preserving the cylindrical symmetry. For both types of geometries we find that the static configurations can be stable for suitable values of the parameters. (orig.)

  17. Thin shells joining local cosmic string geometries

    International Nuclear Information System (INIS)

    Eiroa, Ernesto F.; Rubin de Celis, Emilio; Simeone, Claudio

    2016-01-01

    In this article we present a theoretical construction of spacetimes with a thin shell that joins two different local cosmic string geometries. We study two types of global manifolds, one representing spacetimes with a thin shell surrounding a cosmic string or an empty region with Minkowski metric, and the other corresponding to wormholes which are not symmetric across the throat located at the shell. We analyze the stability of the static configurations under perturbations preserving the cylindrical symmetry. For both types of geometries we find that the static configurations can be stable for suitable values of the parameters. (orig.)

  18. Joining by plating: optimization of occluded angle

    International Nuclear Information System (INIS)

    Dini, J.W.; Johnson, H.R.; Kan, Y.R.

    1978-11-01

    An empirical method has been developed for predicting the minimum angle required for maximum joint strength for materials joined by plating. This is done through a proposed power law failure function, whose coefficients are taken from ring shear and conical head tensile data for plating/substrate combinations and whose exponent is determined from one set of plated-joint data. Experimental results are presented for Al-Ni-Al (7075-T6) and AM363-Ni-AM363 joints, and the failure function is used to predict joint strengths for Al-Ni-Al (2024-T6), UTi-Ni-UTi, and Be-Ti-Be

  19. The usages of JOIN2 authority records

    CERN Multimedia

    CERN. Geneva; Thiele, Robert

    2017-01-01

    An important base of the common JOIN2 repository infrastructure of DESY, DKFZ, FZJ, GSI, MLZ and RWTH Aachen are about 134 000 authority records for grants, projects, large-scale infrastructures, cooperations, journals, and different kinds of keys. All instances are using the authorities together. We will present how these authority data are used for different purposes e.g. the recent and upcoming obligations to report to regard to our funding and the data export to openAire. Furthermore, we discuss this in dependence to the German “Kerndatensatz Forschung”, which will be the new standard for future.

  20. Characterisation of the joining zone of serially arranged hybrid semi-finished components

    Science.gov (United States)

    Behrens, B.-A.; Chugreev, A.; Matthias, T.

    2018-05-01

    Forming of already joined semi-finished products is an innovative approach to manufacture components which are well-adapted to external loads. This approach results in an economically and ecologically improved production by the targeted use of high-quality materials in component areas, which undergo high stresses. One possible production method for hybrid semi-finished products is friction welding. This welding method allows for the production of hybrid semi-finished products made of aluminium and steel as well as steel and steel. In this paper, the thermomechanical tensile and shear stresses causing a failure of the joined zone are experimentally determined through tension tests. These tests are performed with specimens whose joint zones are aligned with different angles to the load direction.

  1. Coincident In Vitro Analysis of DNA-PK-Dependent and -Independent Nonhomologous End Joining

    Directory of Open Access Journals (Sweden)

    Cynthia L. Hendrickson

    2010-01-01

    Full Text Available In mammalian cells, DNA double-strand breaks (DSBs are primarily repaired by nonhomologous end joining (NHEJ. The current model suggests that the Ku 70/80 heterodimer binds to DSB ends and recruits DNA-PKcs to form the active DNA-dependent protein kinase, DNA-PK. Subsequently, XRCC4, DNA ligase IV, XLF and most likely, other unidentified components participate in the final DSB ligation step. Therefore, DNA-PK plays a key role in NHEJ due to its structural and regulatory functions that mediate DSB end joining. However, recent studies show that additional DNA-PK-independent NHEJ pathways also exist. Unfortunately, the presence of DNA-PKcs appears to inhibit DNA-PK-independent NHEJ, and in vitro analysis of DNA-PK-independent NHEJ in the presence of the DNA-PKcs protein remains problematic. We have developed an in vitro assay that is preferentially active for DNA-PK-independent DSB repair based solely on its reaction conditions, facilitating coincident differential biochemical analysis of the two pathways. The results indicate the biochemically distinct nature of the end-joining mechanisms represented by the DNA-PK-dependent and -independent NHEJ assays as well as functional differences between the two pathways.

  2. Development of low temperature solid state joining technology of dissimilar for nuclear heat exchanger tube components

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-08-15

    By conventional fusion welding process (TIG), a realization of reliable and sound joints for the nuclear heat exchanger components is very difficult, especially for the parts comprising of the dissimilar metal couples (Ti-STS, Ti-Cu alloy etc.). This is mainly attributed to the formation of brittle intermetallics (Ti{sub x}Cu{sub y}, Ti{sub x}Fe{sub y}, Ti{sub x}Ni{sub y} etc.) and wide difference in physical properties. Moreover, it usually employs very high thermal input, so making it difficult to obtain sound joints due to generations of high residual stresses and degradation of the adjacent base metals, even for similar metal combinations. In this project, the low temperature solid-state joining technology was established by developing new alloy fillers, e.g. the multi-component eutectic based alloys or amorphous alloys, and thereby lowering the joining temperature down to {approx}800 .deg. C without affecting the structural properties of base metals. Based on a low temperature joining, the interlayer engineering technology was then developed to be able to eliminate the brittleness of the joints for strong Ti-STS dissimilar joints, and the diffusion brazing technology of Ti-Ti with a superior joining strength and corrosion-resistance comparable to those of base metal were developed. By using those developed technologies, the joining procedures feasible for the heat exchanger components were finally established for the dissimilar metal joints including Ti tube sheet to super STS tube, Ti tube sheet to super STS tube sheet, and the joints of the Ti tube to Ti tube sheet

  3. Microstructure and mechanical properties of low-activation glass-ceramic joining and coating for SiC/SiC composites

    International Nuclear Information System (INIS)

    Katoh, Yutai; Kotani, M.; Kohyama, A.; Montorsi, M.; Salvo, M.; Ferraris, M.

    2000-01-01

    Calcia-alumina (CA) glass-ceramic was studied as a candidate low-activation joining and sealing material for SiC/SiC components for fusion blanket and diverter structures, in terms of microstructural stability and mechanical properties. The CA glass-ceramic joining and seal coating were applied to the Hi-Nicalon TM SiC fiber-reinforced SiC matrix composites in which the matrix had been formed through chemical vapor infiltration and polymer impregnation and pyrolysis methods. Microstructural characterization was carried out for the joined and coated materials by optical and scanning electron microscopy (SEM). The mechanical property of the joint was evaluated through a shear test on sandwich joints. The average shear strength of the joined structures was 28 MPa at room temperature. Fractography revealed that the fracture occurred in the glass phase and the shear strength may be improved by reduction of the glass fraction

  4. Connecting Two Worlds: Collaboration between Higher Education and Corporate Learning

    Science.gov (United States)

    Masie, Elliott

    2012-01-01

    Colleges and universities enroll approximately 15 million full-time students in the United States. Most of these learners will soon be joining the more than 139 million employees in the U.S. workforce, where their education will continue through corporate education, training, and development. There are many similarities between the learning and…

  5. Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases ? and ? for nonhomologous end joining in human whole-cell extracts

    OpenAIRE

    Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P.; Lee, Kyung-Jong; Chen, David J.; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F.

    2009-01-01

    XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5? or 3? overhangs, and no joining at all of partially complementary 3? overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped us...

  6. Fabrication and characterization of joined silicon carbide cylindrical components for nuclear applications

    Science.gov (United States)

    Khalifa, H. E.; Deck, C. P.; Gutierrez, O.; Jacobsen, G. M.; Back, C. A.

    2015-02-01

    The use of silicon carbide (SiC) composites as structural materials in nuclear applications necessitates the development of a viable joining method. One critical application for nuclear-grade joining is the sealing of fuel within a cylindrical cladding. This paper demonstrates cylindrical joint feasibility using a low activation nuclear-grade joint material comprised entirely of β-SiC. While many papers have considered joining material, this paper takes into consideration the joint geometry and component form factor, as well as the material performance. Work focused specifically on characterizing the strength and permeability performance of joints between cylindrical SiC-SiC composites and monolithic SiC endplugs. The effects of environment and neutron irradiation were not evaluated in this study. Joint test specimens of different geometries were evaluated in their as-fabricated state, as well as after being subjected to thermal cycling and partial mechanical loading. A butted scarf geometry supplied the best combination of high strength and low permeability. A leak rate performance of 2 × 10-9 mbar l s-1 was maintained after thermal cycling and partial mechanical loading and sustained applied force of 3.4 kN, or an apparent strength of 77 MPa. This work shows that a cylindrical SiC-SiC composite tube sealed with a butted scarf endplug provides out-of-pile strength and permeability performance that meets light water reactor design requirements.

  7. UK Announces Intention to Join ESO

    Science.gov (United States)

    2000-11-01

    Summary The Particle Physics and Astronomy Research Council (PPARC) , the UK's strategic science investment agency, today announced that the government of the United Kingdom is making funds available that provide a baseline for this country to join the European Southern Observatory (ESO) . The ESO Director General, Dr. Catherine Cesarsky , and the ESO Community warmly welcome this move towards fuller integration in European astronomy. "With the UK as a potential member country of ESO, our joint opportunities for front-line research and technology will grow significantly", she said. "This announcement is a clear sign of confidence in ESO's abilities, most recently demonstrated with the construction and operation of the unique Very Large Telescope (VLT) on Paranal. Together we will look forward with confidence towards new, exciting projects in ground-based astronomy." It was decided earlier this year to place the 4-m UK Visible and Infrared Survey Telescope (VISTA) at Paranal, cf. ESO Press Release 03/00. Following negotiations between ESO and PPARC, a detailed proposal for the associated UK/ESO Agreement with the various entry modalities will now be presented to the ESO Council for approval. Before this Agreement can enter into force, the ESO Convention and associated protocols must also be ratified by the UK Parliament. Research and key technologies According to the PPARC press release, increased funding for science, announced by the UK government today, will enable UK astronomers to prepare for the next generation of telescopes and expand their current telescope portfolio through membership of the European Southern Observatory (ESO). The uplift to its baseline budget will enable PPARC to enter into final negotiations for UK membership of the ESO. This will ensure that UK astronomers, together with their colleagues in the ESO member states, are actively involved in global scale preparations for the next generation of astronomy facilities. among these are ALMA

  8. Joining and fabrication techniques for high temperature structures including the first wall in fusion reactor

    International Nuclear Information System (INIS)

    Lee, Ho Jin; Lee, B. S.; Kim, K. B.

    2003-09-01

    The materials for PFC's (Plasma Facing Components) in a fusion reactor are severely irradiated with fusion products in facing the high temperature plasma during the operation. The refractory materials can be maintained their excellent properties in severe operating condition by lowering surface temperature by bonding them to the high thermal conducting materials of heat sink. Hence, the joining and bonding techniques between dissimilar materials is considered to be important in case of the fusion reactor or nuclear reactor which is operated at high temperature. The first wall in the fusion reactor is heated to approximately 1000 .deg. C and irradiated severely by the plasma. In ITER, beryllium is expected as the primary armour candidate for the PFC's; other candidates including W, Mo, SiC, B4C, C/C and Si 3 N 4 . Since the heat affected zones in the PFC's processed by conventional welding are reported to have embrittlement and degradation in the sever operation condition, both brazing and diffusion bonding are being considered as prime candidates for the joining technique. In this report, both the materials including ceramics and the fabrication techniques including joining technique between dissimilar materials for PFC's are described. The described joining technique between the refractory materials and the dissimilar materials may be applicable for the fusion reactor and Generation-4 future nuclear reactor which are operated at high temperature and high irradiation

  9. The Impact of Service-Learning in Supporting Family Empowerment and Welfare Program

    Science.gov (United States)

    Natadjaja, Listia; Cahyono, Yohanes Budi

    2009-01-01

    Background: Facilitated by Community Outreach Centre, the Packaging Design class of Visual Communication Design major at Petra Christian University implements Service-Learning Program to assist micro-industries that have joined in the Family Empowerment and Welfare Program in Kabupaten Kediri. Students, in cooperation with lecturer assist…

  10. Gastrointestinal helminths of Gentoo penguins (Pygoscelis papua) from Stranger Point, 25 de Mayo/King George Island, Antarctica.

    Science.gov (United States)

    Diaz, Julia Inés; Fusaro, Bruno; Longarzo, Lucrecia; Coria, Néstor Rubén; Vidal, Virginia; Jerez, Silvia; Ortiz, Juana; Barbosa, Andrés

    2013-05-01

    The aim of this work is to contribute to the knowledge of gastrointestinal parasites of the Gentoo penguin (Pygoscelis papua) from 25 de Mayo/King George Island (South Shetlands, Antarctica). Gastrointestinal tracts of 37 fresh dead individuals (21 chicks, 10 juveniles, and 6 adults) were collected from December 2006 to February 2012 and examined for macroparasites. Four adult parasite species were found: one Cestoda species (Parorchites zederi), two Nematoda species (Stegophorus macronectes and Tetrameres wetzeli), and one Acanthocephalan (Corynosoma shackletoni). Two species of immature acanthocephalans, Corynosoma hamanni and Corynosoma bullosum, were found in a single host. This is the first record of Tetrameres wetzeli in Gentoo penguins. The low parasite richness observed could be related to the stenophagic and pelagic diet of this host species which feeds almost exclusively on krill.

  11. Salinity monitoring using remote sensing in the 038 Rio Mayo Irrigation District. Sonora, Mexico, by remote sensing

    International Nuclear Information System (INIS)

    Pulido Madrigal, L.; Gonzalez Meraz, J.

    2009-01-01

    a soil salinity survey was carried out in the Rio Mayo irrigation district (ID) in 1996, using satellite imagery along with and EM-38 electromagnetic (EM) device. Data from Landsat TM imagery were calibrated with field data, according to the Plant Indicator methodology. This methodology yielded a partial salinity map of the ID, but including only those areas where indicator crops were cultivated. The remaining non-mapped areas were surveyed with an EM-38 electromagnetic device, generating a second partial salinity map. Both partial maps were integrated to get a complete soil salinity map of the ID. In 2001, another soil salinity survey was carried out using solely the EM device. The results of both methodologies were analyzed, resulting in less affected areas in 2001 compared too those obtained in 1996. (Author) 4 refs.

  12. Developments in welding and joining methods of metallic materials

    International Nuclear Information System (INIS)

    Pilarczyk, J.

    2007-01-01

    The impact of the welding technology on the economy development. The welding and joining methods review. The particular role of the laser welding and its interesting applications: with filler metal, twin spot laser welding, hybrid welding process, remote welding. The fiber lasers. The high intensity electron beams applications for surface modification. The TIG welding with the use of the active flux. Friction welding, friction stir welding and friction linear welding. (author)

  13. Joining technologies for the plasma facing components of ITER

    International Nuclear Information System (INIS)

    Barabash, V.; Kalinin, G.; Matera, R.

    1998-01-01

    An extensive R and D program on the development of the joining technologies between armour (beryllium, tungsten and carbon fibre composites)/copper alloys heat sink and copper alloys/ stainless steel has been carried out by ITER Home Teams. A brief review of this R and D program is presented in this paper. Based on the results, reference technologies for use in ITER have been selected and recommended for further development. (author)

  14. Processing of pro-opiomelanocortin-derived amidated joining peptide and glycine-extended precursor in monkey pituitary

    DEFF Research Database (Denmark)

    Fenger, M

    1991-01-01

    The molecular forms of proopiomelanocortin (POMC) derived amidated and C-terminal glycine-extended joining peptide from monkey (Macaca mulatta) pituitary were determined. The predominant forms of joining peptide found were the low molecular peptides POMC(76-105) and POMC(76-106), respectively...... sequence of monkey and human POMC extremely conserved, but also the processing patterns are similar. The monkey therefore serves as a suitable model for studying regulation of the processing of POMC and the hypothalamus-pituitary-adrenal axis in man....

  15. Pioneering a Nursing Home Quality Improvement Learning Collaborative: A Case Study of Method and Lessons Learned.

    Science.gov (United States)

    Gillespie, Suzanne M; Olsan, Tobie; Liebel, Dianne; Cai, Xueya; Stewart, Reginald; Katz, Paul R; Karuza, Jurgis

    2016-02-01

    To describe the development of a nursing home (NH) quality improvement learning collaborative (QILC) that provides Lean Six Sigma (LSS) training and infrastructure support for quality assurance performance improvement change efforts. Case report. Twenty-seven NHs located in the Greater Rochester, NY area. The learning collaborative approach in which interprofessional teams from different NHs work together to improve common clinical and organizational processes by sharing experiences and evidence-based practices to achieve measurable changes in resident outcomes and system efficiencies. NH participation, curriculum design, LSS projects. Over 6 years, 27 NHs from urban and rural settings joined the QILC as organizational members and sponsored 47 interprofessional teams to learn LSS techniques and tools, and to implement quality improvement projects. NHs, in both urban and rural settings, can benefit from participation in QILCs and are able to learn and apply LSS tools in their team-based quality improvement efforts. Published by Elsevier Inc.

  16. Can a teaching assistant experience in a surgical anatomy course influence the learning curve for nontechnical skill development for surgical residents?

    Science.gov (United States)

    Heidenreich, Mark J; Musonza, Tashinga; Pawlina, Wojciech; Lachman, Nirusha

    2016-01-01

    The foundation upon which surgical residents are trained to work comprises more than just critical cognitive, clinical, and technical skill. In an environment where the synchronous application of expertise is vital to patient outcomes, the expectation for optimal functioning within a multidisciplinary team is extremely high. Studies have shown that for most residents, one of the most difficult milestones in the path to achieving professional expertise in a surgical career is overcoming the learning curve. This view point commentary provides a reflection from the two senior medical students who have participated in the Student-as-Teacher program developed by the Department of Anatomy at Mayo Clinic, designed to prepare students for their teaching assistant (TA) role in anatomy courses. Both students participated as TAs in a six week surgical anatomy course for surgical first assistant students offered by the School of Health Sciences at Mayo Clinic. Development of teaching skills, nontechnical leadership, communication, and assessment skills, are discussed in relation to their benefits in preparing senior medical students for surgical residency. © 2015 American Association of Anatomists.

  17. Joining the un global compact in spain : an institutional Aproach

    Directory of Open Access Journals (Sweden)

    Ainhoa garayar erro

    2012-07-01

    On the other hand, it can be asserted that the respondent organisations do not perceive major threats from the institutional environment that might undermine the legitimacy gained by joining the GC. Nonetheless, the Spanish organisations participating in the GC highlight the fact that the main institutional factor that might undermine the organization's legitimacy is weak governance and corruption.

  18. Mobile Real-time Tracking of Acute Stroke Patients and Instant, Secure Inter-team Communication - the Join App.

    Science.gov (United States)

    Munich, Stephan A; Tan, Lee A; Nogueira, Danilo M; Keigher, Kiffon M; Chen, Michael; Crowley, R Webster; Conners, James J; Lopes, Demetrius K

    2017-09-01

    The primary correlate to survival and preservation of neurologic function in patients suffering from an acute ischemic stroke is time from symptom onset to initiation of therapy and reperfusion. Communication and coordination among members of the stroke team are essential to maximizing efficiency and subsequently early reperfusion. In this work, we aim to describe our preliminary experience using the Join mobile application as a means to improve interdisciplinary team communication and efficiency. We describe our pilot experience with the initiation of the Join mobile application between July 2015 and July 2016. With this application, a mobile beacon is transported with the patient on the ambulance. Transportation milestone timestamps and geographic coordinates are transmitted to the treating facility and instantly communicated to all treatment team members. The transport team / patient can be tracked en route to the treating facility. During our pilot study, 62 patients were triaged and managed using the Join application. Automated time-stamping of critical events, geographic tracking of patient transport and summary documents were obtained for all patients. Treatment team members had an overall favorable impression of the Join application and recommended its continued use. The Join application is one of several components of a multi-institutional, interdisciplinary effort to improve the treatment of patients with acute ischemic stroke. The ability of the treatment team to track patient transport and communicate with the transporting team may improve reperfusion time and, therefore, improve neurologic outcomes.

  19. DNA double-strand break response factors influence end-joining features of IgH class switch and general translocation junctions.

    Science.gov (United States)

    Panchakshari, Rohit A; Zhang, Xuefei; Kumar, Vipul; Du, Zhou; Wei, Pei-Chi; Kao, Jennifer; Dong, Junchao; Alt, Frederick W

    2018-01-23

    Ig heavy chain (IgH) class switch recombination (CSR) in B lymphocytes switches IgH constant regions to change antibody functions. CSR is initiated by DNA double-strand breaks (DSBs) within a donor IgH switch (S) region and a downstream acceptor S region. CSR is completed by fusing donor and acceptor S region DSB ends by classical nonhomologous end-joining (C-NHEJ) and, in its absence, by alternative end-joining that is more biased to use longer junctional microhomologies (MHs). Deficiency for DSB response (DSBR) factors, including ataxia telangiectasia-mutated (ATM) and 53BP1, variably impair CSR end-joining, with 53BP1 deficiency having the greatest impact. However, studies of potential impact of DSBR factor deficiencies on MH-mediated CSR end-joining have been technically limited. We now use a robust DSB joining assay to elucidate impacts of deficiencies for DSBR factors on CSR and chromosomal translocation junctions in primary mouse B cells and CH12F3 B-lymphoma cells. Compared with wild-type, CSR and c-myc to S region translocation junctions in the absence of 53BP1, and, to a lesser extent, other DSBR factors, have increased MH utilization; indeed, 53BP1-deficient MH profiles resemble those associated with C-NHEJ deficiency. However, translocation junctions between c-myc DSB and general DSBs genome-wide are not MH-biased in ATM-deficient versus wild-type CH12F3 cells and are less biased in 53BP1- and C-NHEJ-deficient cells than CSR junctions or c-myc to S region translocation junctions. We discuss potential roles of DSBR factors in suppressing increased MH-mediated DSB end-joining and features of S regions that may render their DSBs prone to MH-biased end-joining in the absence of DSBR factors.

  20. ITER oriented issues-1 (joining)

    International Nuclear Information System (INIS)

    Gervash, A.; Mazul, I.; Litunovsky, N.; Pokrovsky, A.

    2004-01-01

    Proposing beryllium as plasma facing armor and fast brazing as Be/Cu-alloy joining technique, this paper presents the recent experimental results. It was shown that fast brazing of Be onto both PH-copper like CuCrZr and DS (Dispersion Strengthen)-copper like GlidCop provides reliable joint that does not failure under heat flux up to melting of Be surface. Investigating the influence of neutron irradiation on Be/Cu-alloy joint behavior, in-pile integrated test in a core of nuclear reactor CN-2, Dimitrovgrad, Russia was carried out. In this test actively cooled Be/CuCrZr and Be/GildCop joints were simultaneously subjected to high heat flux (1000 cycles, ∼7.5 MW/m 2 ) and neutron irradiation (total 2.8 x 10 20 n/cm 2 , ∼0.13 dpa). Both type of tested joints successfully survived applied heat and neutron loads. Optic and TEM metallography before and after irradiation as well as micro harness measurements are presented and discussed. (author)

  1. Distinct DNA repair pathways involving RecA and nonhomologous end joining in Mycobacterium smegmatis.

    Science.gov (United States)

    Korycka-Machala, Malgorzata; Brzostek, Anna; Rozalska, Sylwia; Rumijowska-Galewicz, Anna; Dziedzic, Renata; Bowater, Richard; Dziadek, Jaroslaw

    2006-05-01

    Mycobacterium smegmatis was used to study the relationship between DNA repair processes involving RecA and nonhomologous end joining (NHEJ). The effect of gene deletions in recA and/or in two genes involved in NHEJ (ku and ligD) was tested on the ability of bacteria to join breaks in plasmids transformed into them and in their response to chemicals that damage DNA. The results provide in vivo evidence that only NHEJ is required for the repair of noncompatible DNA ends. By contrast, the response of mycobacteria to mitomycin C preferentially involved a RecA-dependent pathway.

  2. Joined up Thinking? Evaluating the Use of Concept-Mapping to Develop Complex System Learning

    Science.gov (United States)

    Stewart, Martyn

    2012-01-01

    In the physical and natural sciences, the complexity of natural systems and their interactions is becoming better understood. With increased emphasis on learning about complex systems, students will be encountering concepts that are dynamic, ill-structured and interconnected. Concept-mapping is a method considered particularly valuable for…

  3. Advances in appendage joining techniques for PHWR fuel cladding

    International Nuclear Information System (INIS)

    Desai, P.B.; Ray, T.K.; Date, V.G.; Purushotham, D.S.C.

    1995-01-01

    This paper describes work carried out at the BARC on the development of a technique to join tiny appendages (spacers and bearing pads) to thin cladding (before loading of UO 2 pellets) by resistance welding for PHWR fuel assemblies. The work includes qualifying the process for production environment, designing prototype equipment for regular production and quality monitoring. In the first phase of development, welding of appendages on UO 2 loaded elements was successfully developed, and is being used in production. Welding of appendages on to empty clad tubes is a superior technique for several reasons. Many problems associated with development of welding on empty tubes were resolved. work was initiated, in the second phase of the development task, to select a suitable technique to join appendages on empty clad tubes without any collapse of thin clad. Several alternatives were reviewed and assessed such as laser, full face welding, shim welding and shrink fitting ring spacers. Selection of a method using a mandrel and a modified electrode geometry was fully developed. Results were optimized and process development successfully completed. Appropriate weld monitoring techniques were also reviewed for their adaptation. This technique is useful for 19, 22 as well as 37 element assemblies. (author)

  4. Evaluation of adjuvant chemoradiation therapy for ampullary adenocarcinoma: the Johns Hopkins Hospital - Mayo Clinic collaborative study

    International Nuclear Information System (INIS)

    Narang, Amol K; Haddock, Michael G; Donohue, John H; Schulick, Richard D; Wolfgang, Christopher L; Cameron, John L; Herman, Joseph M; Miller, Robert C; Hsu, Charles C; Bhatia, Sumita; Pawlik, Timothy M; Laheru, Dan; Hruban, Ralph H; Zhou, Jessica; Winter, Jordan M

    2011-01-01

    The role of adjuvant chemoradiation therapy for ampullary carcinoma is unknown. Previous literature suggests that certain populations with high risk factors for recurrence may benefit from adjuvant chemoradiation. We combined the experience of two institutions to better delineate which patients may benefit from adjuvant chemoradiation. Patients who underwent curative surgery for ampullary carcinoma at the Johns Hopkins Hospital (n = 290; 1992-2007) and at the Mayo Clinic (n = 130; 1977-2005) were reviewed. Patients with <60 days of follow-up, metastatic disease at surgery, or insufficient pathologic data were excluded. The final combined study consisted of 186 patients (n = 104 Johns Hopkins, n = 82 Mayo). Most patients received 5-FU based chemoradiation with conformal radiation. Cox proportional hazards models were used for survival analysis. Median overall-survival was 39.9 months with 2- and 5-year survival rates of 62.4% and 39.1%. On univariate analysis, adverse prognostic factors for overall survival included T3/T4 stage disease (RR = 1.86, p = 0.002), node positive status (RR = 3.18, p < 0.001), and poor histological grade (RR = 1.69, p = 0.011). Patients who received adjuvant chemoradiation (n = 66) vs. surgery alone (n = 120) showed a higher rate of T3/T4 stage disease (57.6% vs. 30.8%, P < 0.001), lymph node involvement (72.7% vs. 30.0%, P < 0.001), and close or positive margins (4.6% vs. 0.0%, P = 0.019). Five year survival rates among node negative and node positive patients were 58.7% and 18.4% respectively. When compared with surgery alone, use of adjuvant chemoradiation improved survival among node positive patients (mOS 32.1 vs. 15.7 mos, 5 yr OS: 27.5% vs. 5.9%; RR = 0.47, P = 0.004). After adjusting for adverse prognostic factors on multivariate analysis, patients treated with adjuvant chemoradiation demonstrated a significant survival benefit (RR = 0.40, P < 0.001). Disease relapse occurred in 37.1% of all patients, most commonly metastatic

  5. Joining Forces: A Response to Kathy Rentz from the European Perspective

    Science.gov (United States)

    Louhiala-Salminen, Leena

    2010-01-01

    In this article, the author responds to Kathy Rentz. She happily joins forces for pedagogically defensible teaching conditions and gives a brief "activist" account from the European perspective. However, rather than "European," she emphasizes that for the most part, this response looks at business communication teachers'…

  6. Joining of aluminum and stainless steel using AlSi10 brazing filler: Microstructure and mechanical properties

    Science.gov (United States)

    Fedorov, Vasilii; Uhlig, Thomas; Wagner, Guntram

    2017-07-01

    Joining of dissimilar materials like stainless steel and aluminum is of special interest for automotive applications. Due to the different properties of these materials, suitable joining techniques are required. Brazing offers the possibilities to manufacture high performance joints in one step and at low joining temperatures. However, these joints often need to withstand a high number of high cyclic loads during application. Therefore, in addition to the monotonic properties, the fatigue behavior of the produced joints must be considered and evaluated. In the present work, specimens are manufactured by induction brazing using an AlSi10 filler and a non-corrosive flux. The mechanical properties are determined by tensile shear tests as well as in fatigue tests at ambient and elevated temperatures. The microstructure of the brazed joints and the fracture surfaces of the tested samples are investigated by SEM.

  7. Studying the Issues in Laser Joining of Lightweight Materials in a Coach-Peel Joint Configuration

    Science.gov (United States)

    Yang, Guang

    In the automotive industry, aluminum alloys have been widely used and partially replaced the conventional steel structures in order to decrease the weight of a car and improve its fuel efficiency. This Thesis focuses on the development of laser joining of light-weight materials, such as aluminum alloys and high-strength galvanized steels. Among different joint types, the coach-peel configuration is of a specific design that requires a heat source capable of heating up a large surface area of the joint. Coach-peel joints applied on the visible exterior of a car require a smooth transition from the weld surface to the panel surface and low surface roughness without any need for post-processing. Although these joints are used as non-load-bearing components, a desirable strength of the weld is also needed. A fusion-brazing process using a dual-beam laser allows the automotive components such as the roof and side member panels to be joined in a coach-peel configuration with a high surface quality as well as an acceptable strength of the weld. To improve the weld surface quality, processing parameters such as laser beam configuration, laser-wire position, and shielding gas parameters were optimized for joining of aluminum alloy to aluminum alloy. Laser power was optimized for dual-beam laser joining of aluminum alloy to galvanized steel at high speed. The feasibility of joining as-received panels with lubricant was also explored. The identification of strain hardening models of aluminum alloys was conducted for the mechanical finite element analysis of the joint. Control of the molten pool solidification through the selection of laser beam configuration is one approach to improve joint quality. Laser joining of aluminum alloy AA 6111-T4 coach peel panels with the addition of AA 4047 filler wire was investigated using three configurations of laser beam: a single beam, dual beams in-line with the weld bead, and dual beams aligned perpendicular to the weld bead (herein

  8. Joining of Aluminium Alloy and Steel by Laser Assisted Reactive Wetting

    Science.gov (United States)

    Liedl, Gerhard; Vázquez, Rodrigo Gómez; Murzin, Serguei P.

    2018-03-01

    Compounds of dissimilar materials, like aluminium and steel offer an interesting opportunity for the automotive industry to reduce the weight of a car body. Thermal joining of aluminium and steel leads to the formation of brittle intermetallic compounds, which negatively affects the properties of the welded joint. Amongst others, growth of such intermetallic compounds depends on maximum temperature and on the time at certain temperatures. Laser welding with its narrow well seam and its fast heating and cooling cycles provides an excellent opportunity to obtain an ultrathin diffusion zone. Joining of sheet metal DC01 with aluminium alloy AW6016 has been chosen for research. The performed experimental studies showed that by a variation of the beam power and scanning speed it is possible to obtain an ultrathin diffusion zone with narrow intermetallic interlayers. With the aim of supporting further investigation of laser welding of the respective and other dissimilar pairings a multi-physical simulation model has been developed.

  9. Unsolved mystery: the role of BRCA1 in DNA end-joining

    International Nuclear Information System (INIS)

    Saha, Janapriya; Davis, Anthony J.

    2016-01-01

    Heritable mutations in the tumor suppressor gene BRCA1 increase a woman's lifetime risk of developing breast and ovarian cancer. BRCA1's tumor suppressor function is directly linked to its myriad of functions in the cellular response to DNA double-strand breaks (DSBs). BRCA1 interacts with an extensive array of DNA damage responsive proteins and plays important roles in DSB repair, mediated by the homologous recombination pathway, and in the activation of cell cycle checkpoints. However, the role of BRCA1 in the other two DSB repair pathways, classical non-homologous end-joining (C-NHEJ) and alternative NHEJ (A-NHEJ), remains unclear. In this review, we will discuss the current literature on BRCA1's potential role(s) in modulating both C-NHEJ and A-NHEJ. We also present a model showing that BRCA1 contributes to genomic maintenance by promoting precise DNA repair across all cell cycle phases via the direct modulation of DNA end-joining

  10. Medical Robotic and Telesurgical Simulation and Education Research

    Science.gov (United States)

    2012-09-01

    an expert - Gladwell “There is no excuse for the surgeon to learn on the patient.” – William Mayo, 1927 32 Outliers l"n r: · oRY or l l E s MALCOLM ...10,000 hours to become an expert - Gladwell “There is no excuse for the surgeon to learn on the patient.” – William Mayo, 1927 100 Outliers l"n r...oRY or l l E s MALCOLM GLADW Medical Education – Explosion of Information • Medical procedures are becoming more numerous and more complex – medical

  11. Joining and fabrication techniques for high temperature structures including the first wall in fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Jin; Lee, B. S.; Kim, K. B

    2003-09-01

    The materials for PFC's (Plasma Facing Components) in a fusion reactor are severely irradiated with fusion products in facing the high temperature plasma during the operation. The refractory materials can be maintained their excellent properties in severe operating condition by lowering surface temperature by bonding them to the high thermal conducting materials of heat sink. Hence, the joining and bonding techniques between dissimilar materials is considered to be important in case of the fusion reactor or nuclear reactor which is operated at high temperature. The first wall in the fusion reactor is heated to approximately 1000 .deg. C and irradiated severely by the plasma. In ITER, beryllium is expected as the primary armour candidate for the PFC's; other candidates including W, Mo, SiC, B4C, C/C and Si{sub 3}N{sub 4}. Since the heat affected zones in the PFC's processed by conventional welding are reported to have embrittlement and degradation in the sever operation condition, both brazing and diffusion bonding are being considered as prime candidates for the joining technique. In this report, both the materials including ceramics and the fabrication techniques including joining technique between dissimilar materials for PFC's are described. The described joining technique between the refractory materials and the dissimilar materials may be applicable for the fusion reactor and Generation-4 future nuclear reactor which are operated at high temperature and high irradiation.

  12. A Partial Join Approach for Mining Co-Location Patterns: A Summary of Results

    National Research Council Canada - National Science Library

    Yoo, Jin S; Shekhar, Shashi

    2005-01-01

    .... They propose a novel partial-join approach for mining co-location patterns efficiently. It transactionizes continuous spatial data while keeping track of the spatial information not modeled by transactions...

  13. Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases lambda and mu for nonhomologous end joining in human whole-cell extracts.

    Science.gov (United States)

    Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P; Lee, Kyung-Jong; Chen, David J; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F

    2009-07-01

    XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5' or 3' overhangs, and no joining at all of partially complementary 3' overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped using dideoxynucleotides revealed that there was no gap filling on aligned DSB ends in the Cernunnos-deficient extracts. Recombinant Cernunnos protein restored gap filling and end joining of partially complementary overhangs, and stimulated joining of cohesive ends more than twentyfold. XLF-dependent gap filling was nearly eliminated by immunodepletion of DNA polymerase lambda, but was restored by addition of either polymerase lambda or polymerase mu. Thus, Cernunnos is essential for gap filling by either polymerase during nonhomologous end joining, suggesting that it plays a major role in aligning the two DNA ends in the repair complex.

  14. Joining of Ni-TiC FGM and Ni-Al Intermetallics by Centrifugal Combustion Synthesis

    International Nuclear Information System (INIS)

    Ohmi, Tatsuya; Matsuura, Kiyotaka; Iguchi, Manabu; Mizuma, Kiminori

    2008-01-01

    A centrifugal combustion synthesis (CCS) process has been investigated to join a Ni-Al intermetallic compound and a Ni-TiC cermet. The cermet, a tubular graphite mold, and a green compact of reactants consisting of Al, Ni and NiO were set in a centrifugal caster. When the combustion synthesis reaction was induced in the centrifugal force field, a synthesized molten Ni-Al alloy flowed into the graphite mold and joined to the cermet. The soundness of the joint interface depended on the volume percentage of TiC phase in the cermet. A lot of defects were formed near the interface between the Ni-TiC cermet and the cast Ni-Al alloy when the volume percentage of TiC was 50% or higher. For this kind of cermet system, using a functionally graded cermet such as Ni-10 vol.%TiC/Ni-25 vol.%TiC/Ni-50 vol.%TiC overcame this difficulty. The four-point bending strength of the joined specimen consisting of the three-layered FGM cermet and cast Ni-29 mol%Al alloy was 1010 MPa which is close to the result for a Ni-29 mol%Al alloy specimen

  15. DSCu/SS joining techniques development and testing

    International Nuclear Information System (INIS)

    Sato, Satoshi; Hatano, Toshihisa; Furuya, Kazuyuki; Kuroda, Toshimasa; Enoeda, Mikio; Takatsu, Hideyuki

    1998-01-01

    Joining techniques of alumina dispersion strengthened copper alloy (DSCu) and type 316L stainless steel (SS) has been investigated aiming at applying to the fabrication of the ITER first wall/blanket. As the joining method, Hot Isostatic Pressing (HIP) of solid plates and/or blocks has been pursued. By a screening test including HIP temperatures of 980-1050degC, it was concluded that the HIP temperature of 1050degC would be optimum for the simultaneous HIPping of DSCu/DSCu, DSCu/SS and SS/SS. With DSCu/SS joint specimens HIPped at 1050degC, tensile, impact, fatigue, crack propagation, and fracture toughness tests were performed as well as mechanical test of structural model with one SS circular tube embedded. Typically, the properties of the joints were almost the same as those of DSCu or SS base metal with the same heat treatment of the HIP process, thus good joints were obtained, though parts of properties were decreased at elevated test temperature. Typical results of the mechanical test of structural mode indicated that a crack initiated at the inner surface of the SS tube under cyclic operation, and the lifetime of the first wall structure could be evaluated by existing SS fatigue data. Two HIPped first wall panel mock-ups were successfully fabricated with built-in coolant tubes: one was 300 mm long and the other 800 mm long. The former was thermo-mechanically tested with high heat fluxes corresponding to the ITER operation conditions. The mock-up showed good heat removal performance during the high heat flux tests. In addition, there were no cracks and delaminations found at HIPped interfaces by microscopic observation after all tests. Ultrasonic testing have been tried as a non-destructive examination method, and detectable defect size at SS/SS, DSCu/DSCu and DSCu/SS joint interfaces were estimated. (author)

  16. Social networking as a learning tool: nursing students' perception of efficacy.

    Science.gov (United States)

    Tower, Marion; Latimer, Sharon; Hewitt, Jayne

    2014-06-01

    The pedagogical use of social networking technology in education is of growing interest to academics as a potential teaching and learning tool. However, the educational use of social networking sites such as Facebook is still under explored. Nursing students often perceive bioscience subjects as difficult and lack self-efficacy in their ability to be successful. In this case, as the final assessment for a bioscience related subject approached, students became increasingly anxious about their ability to perform in the assessment item. To better support students, a Facebook group was formed. The aim of the study was to examine students' perceptions of the efficacy of using Facebook as a tool to support study. A convenience sample of BN students (n=533 across 3 campuses), enrolled in the subject Medications and Safe Administration, were invited to join. 373 BN students joined the group (70% of the student cohort). A solution-focussed orientation underpinned the management of the group. A descriptive, online survey was administered following release of students' results for the final assessment item to assess students' perceptions of how effective the group had been in helping them learn. The survey contained both quantitative and qualitative questions. Responses were received from 89 students (24%). Survey data were analysed descriptively and qualitative data were analysed thematically by the academic team. Students perceived the group to be an innovative method of study support that guided learning by enhancing self-efficacy in their learning. Students also described how it was useful in promoting peer learning and engaging with academics. Social media platforms such as Facebook have the potential to enhance students' self-efficacy in learning and can support students to develop their learning to a deeper level. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Trajectory similarity join in spatial networks

    KAUST Repository

    Shang, Shuo; Chen, Lisi; Wei, Zhewei; Jensen, Christian S.; Zheng, Kai; Kalnis, Panos

    2017-01-01

    With these applications in mind, we provide a purposeful definition of similarity. To enable efficient TS-Join processing on large sets of trajectories, we develop search space pruning techniques and take into account the parallel processing capabilities of modern processors. Specifically, we present a two-phase divide-and-conquer algorithm. For each trajectory, the algorithm first finds similar trajectories. Then it merges the results to achieve a final result. The algorithm exploits an upper bound on the spatiotemporal similarity and a heuristic scheduling strategy for search space pruning. The algorithm's per-trajectory searches are independent of each other and can be performed in parallel, and the merging has constant cost. An empirical study with real data offers insight in the performance of the algorithm and demonstrates that is capable of outperforming a well-designed baseline algorithm by an order of magnitude.

  18. Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts

    Directory of Open Access Journals (Sweden)

    Robert Scherzer

    2018-02-01

    Full Text Available This work shows a sequence of numerical models for the simulation of the Presta joining process: a well-established industrial process for manufacturing assembled camshafts. The operation is divided into two sub-steps: the rolling of the shaft to widen the cam seat and the joining of the cam onto the shaft. When manufactured, the connection is tested randomly by loading it with a static torque. Subsequently, there are three numerical models using the finite element method. Additionally, a material model of finite strain viscoplasticity with nonlinear kinematic hardening is used throughout the whole simulation process, which allows a realistic representation of the material behavior even for large deformations. In addition, it enables a transfer of the deformation history and of the internal stresses between different submodels. This work also shows the required parameter identification and the associated material tests. After comparing the numerical results with experimental studies of the manufacturing process for steel-steel connections, the models are used to extend the joining process to the utilization of aluminum shafts.

  19. Analytical and Experimental Evaluation of Joining Silicon Carbide to Silicon Carbide and Silicon Nitride to Silicon Nitride for Advanced Heat Engine Applications Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, G.J.

    1994-01-01

    Techniques were developed to produce reliable silicon nitride to silicon nitride (NCX-5101) curved joins which were used to manufacture spin test specimens as a proof of concept to simulate parts such as a simple rotor. Specimens were machined from the curved joins to measure the following properties of the join interlayer: tensile strength, shear strength, 22 C flexure strength and 1370 C flexure strength. In parallel, extensive silicon nitride tensile creep evaluation of planar butt joins provided a sufficient data base to develop models with accurate predictive capability for different geometries. Analytical models applied satisfactorily to the silicon nitride joins were Norton's Law for creep strain, a modified Norton's Law internal variable model and the Monkman-Grant relationship for failure modeling. The Theta Projection method was less successful. Attempts were also made to develop planar butt joins of siliconized silicon carbide (NT230).

  20. Joining the Conversation: Twitter as a Tool for Student Political Engagement

    Science.gov (United States)

    Journell, Wayne; Ayers, Cheryl A.; Beeson, Melissa Walker

    2013-01-01

    This article describes possibilities afforded by using social media, specifically Twitter, as a way to encourage students to join political conversations across the United States and around the world. In this study, we describe a project in which students used Twitter to share commentary about the state of the 2012 presidential election. The…

  1. Environmental iodine intake and pattern of thyroid diseases: experience at nuclear medicine centre, Mayo Hospital (abstract)

    International Nuclear Information System (INIS)

    Elahi, S.; Khan, M.; Rasool, S.; Khalid, A.; Tasneem, A.

    2011-01-01

    To know level of iodine intake in women residing in Lahore and correlate it with pattern of thyroid diseases found in women referred to Centre for Nuclear Medicine (CENUM), Mayo Hospital. Iodine intake status was determined by urinary iodine (UI) excretion by Sandell-Kolthoff reaction. Thyroid related hormones (FT4, FT3 and TSH) were measured by radioimmunoassay. In 110 non-pregnant euthyroid women (age 20-36 year) average iodine intake was 66.3 +- 14.4 mu g/L (range: 30-98 mu g/dL). All women were iodine deficient (UI 22.0 pmol/L and TSH greater or equal to 0.1mIU/L) was detected in 580(10.8%) women and hypothyroidism (FT4 0.4mIU/L) was found in 271(5.1%) women. Thus incidence of hyperthyroidism was almost double than that of hypothyroidism. Low iodine intake is manifested as increased incidence of hyperthyroidism. (author)

  2. Klebsiella pneumoniae nueva Delhi metalo-betalactamasa en el Hospital Nacional Dos de Mayo: Lima, Perú

    Directory of Open Access Journals (Sweden)

    Cristhian Resurrección-Delgado

    Full Text Available La emergencia de enterobacterias productoras de carbapenemasas de tipo Nueva Delhi Metalo beta-lactamasas (NDM, representan, hoy en día, un verdadero problema de salud pública mundial. La presencia de este mecanismo de resistencia limita o anula las opciones terapéuticas para combatir a estas bacterias. En Latinoamérica, las cifras son cada vez más elevadas, pues se reportan en Guatemala, Colombia, Chile, Argentina, entre otros. Perú no ha descrito, hasta la fecha, la presencia de este patrón de resistencia; sin embargo, desde hace varios años se presume de su existencia. Se describen nueve casos de Klebsiella pneumoniae NDM, como agentes infecciosos o colonizantes, en pacientes críticamente enfermos, en su mayoría con patología neuroquirúrgica, del Hospital Nacional Dos de Mayo, en Lima - Perú. Los pacientes de la serie descrita a continuación, representan los primeros reportes de Klebsiella pneumoniae NDM en el Perú.

  3. Contribution of canonical nonhomologous end joining to chromosomal rearrangements is enhanced by ATM kinase deficiency.

    Science.gov (United States)

    Bhargava, Ragini; Carson, Caree R; Lee, Gabriella; Stark, Jeremy M

    2017-01-24

    A likely mechanism of chromosomal rearrangement formation involves joining the ends from two different chromosomal double-strand breaks (DSBs). These events could potentially be mediated by either of two end-joining (EJ) repair pathways [canonical nonhomologous end joining (C-NHEJ) or alternative end joining (ALT-EJ)], which cause distinct rearrangement junction patterns. The relative role of these EJ pathways during rearrangement formation has remained controversial. Along these lines, we have tested whether the DNA damage response mediated by the Ataxia Telangiectasia Mutated (ATM) kinase may affect the relative influence of C-NHEJ vs. ALT-EJ on rearrangement formation. We developed a reporter in mouse cells for a 0.4-Mbp deletion rearrangement that is formed by EJ between two DSBs induced by the Cas9 endonuclease. We found that disruption of the ATM kinase causes an increase in the frequency of the rearrangement as well as a shift toward rearrangement junctions that show hallmarks of C-NHEJ. Furthermore, ATM suppresses rearrangement formation in an experimental condition, in which C-NHEJ is the predominant EJ repair event (i.e., expression of the 3' exonuclease Trex2). Finally, several C-NHEJ factors are required for the increase in rearrangement frequency caused by inhibition of the ATM kinase. We also examined ATM effectors and found that H2AX shows a similar influence as ATM, whereas the influence of ATM on this rearrangement seems independent of 53BP1. We suggest that the contribution of the C-NHEJ pathway to the formation of a 0.4-Mbp deletion rearrangement is enhanced in ATM-deficient cells.

  4. Identifying and changing the normative beliefs about aggression which lead young Muslim adults to join extremist anti-Semitic groups in Pakistan.

    Science.gov (United States)

    Amjad, Naumana; Wood, Alex M

    2009-01-01

    Two studies investigated the role of beliefs about the acceptability of aggression ("normative beliefs") against Jews in determining who would join an extremist group. In Study 1, students in a university in Pakistan (N=144) completed self-report attitude measures, and were subsequently approached by a confederate who asked whether they wanted to join an extremist anti-Semitic organization. Normative beliefs about aggression against Jews were very strong predictors of whether participants agreed to join. In Study 2, participants (N=92) were experimentally assigned to either a brief educational intervention, designed to improve inter-group relations, or to a control group. They also filled in self-report attitude measures pre and post intervention. Participants in the intervention group were much less likely to agree to join the extremist group, and this effect of the intervention on joining was mediated by changes in normative beliefs about aggression against Jews. The results have implications for theories of inter-group aggression and interventions to prevent people from being recruited into extremist groups.

  5. The motivation of lifelong mathematics learning

    Science.gov (United States)

    Hashim Ali, Siti Aishah

    2013-04-01

    As adults, we have always learned throughout our life, but this learning is informal. Now, more career-switchers and career-upgraders who are joining universities for further training are becoming the major group of adult learners. This current situation requires formal education in courses with controlled output. Hence, lifelong learning is seen as a necessity and an opportunity for these adult learners. One characteristic of adult education is that the learners tend to bring with them life experience from their past, especially when learning mathematics. Most of them associate mathematics with the school subjects and unable to recognize the mathematics in their daily practice as mathematics. They normally place a high value on learning mathematics because of its prominent role in their prospective careers, but their learning often requires overcoming personal experience and motivating themselves to learn mathematics again. This paper reports on the study conducted on a group of adult learners currently pursuing their study. The aim of this study is to explore (i) the motivation of the adult learners continuing their study; and (ii) the perception and motivation of these learners in learning mathematics. This paper will take this into account when we discuss learners' perception and motivation to learning mathematics, as interrelated phenomena. Finding from this study will provide helpful insights in understanding the learning process and adaption of adult learners to formal education.

  6. Implementation of a model of quality control program in the radiodiagnostic service at the general hospital Dos de Mayo

    International Nuclear Information System (INIS)

    Acosta Reginfo, N.; Ramirez Quijada, R.

    1998-01-01

    In order to implement a model of quality control program, the General Hospital Dos de Mayo was selected, since it manages a specialized radiology service - defined according to the OMS criteria - This radiology service attends nearly 60 % of total patients of the Hospital. This program intends to be a model for application to another hospitals havings similar characteritics, since any formal quality control program has been implemented in neither private nor public hospitals in the country. The model, while allowing to make measurements of main parameters, also allows to verify that radiation doses to patients, radiation workers and public trend to a level as low as reasonably achievable, and also to yield images with enough diagnostic quality, and to induce work environment with shared responsibility and commitment

  7. Creating a Role for Embedded Librarians Within an Active Learning Environment.

    Science.gov (United States)

    Hackman, Dawn E; Francis, Marcia J; Johnson, Erika; Nickum, Annie; Thormodson, Kelly

    2017-01-01

    In 2013, the librarians at a small academic health sciences library reevaluated their mission, vision, and strategic plan to expand their roles. The school was transitioning to a new pedagogical culture and a new building designed to emphasize interprofessional education and active learning methodologies. Subsequent efforts to implement the new strategic plan resulted in the librarians joining curriculum committees and other institutional initiatives, such as an Active Learning Task Force, and participating in faculty development workshops. This participation has increased visibility and led to new roles and opportunities for librarians.

  8. The Challenge of the GATS for Transition Economies Seeking to Join the WTO

    Directory of Open Access Journals (Sweden)

    J. Anthony VanDuzer

    2004-02-01

    Full Text Available Transition economies seeking to join the World Trade Organization (WTO face a variety of distinctive challenges relating to their prospective obligations under the General Agreement on Trade in Services (GATS. Transition economies are characterized by changing market and industry structures on the one hand, and ongoing reforms to their regulatory structures on the other. Both make it extremely difficult for transition economies to develop a position on what WTO services commitments they should undertake in their national schedules of specific commitments. Accession negotiations are further complicated by the evolving nature of GATS rules themselves and the tough negotiating stance taken by existing Members. Based on evidence from recent accessions, the effective minimum requirements relating to services for transition economies seeking to join the WTO are increasing

  9. Childhood exposure to violence and lifelong health: clinical intervention science and stress-biology research join forces.

    Science.gov (United States)

    Moffitt, Terrie E

    2013-11-01

    Many young people who are mistreated by an adult, victimized by bullies, criminally assaulted, or who witness domestic violence react to this violence exposure by developing behavioral, emotional, or learning problems. What is less well known is that adverse experiences like violence exposure can lead to hidden physical alterations inside a child's body, alterations that may have adverse effects on life-long health. We discuss why this is important for the field of developmental psychopathology and for society, and we recommend that stress-biology research and intervention science join forces to tackle the problem. We examine the evidence base in relation to stress-sensitive measures for the body (inflammatory reactions, telomere erosion, epigenetic methylation, and gene expression) and brain (mental disorders, neuroimaging, and neuropsychological testing). We also review promising interventions for families, couples, and children that have been designed to reduce the effects of childhood violence exposure. We invite intervention scientists and stress-biology researchers to collaborate in adding stress-biology measures to randomized clinical trials of interventions intended to reduce effects of violence exposure and other traumas on young people.

  10. Meet and Join Matrices in the Poset of Exponential Divisors

    Indian Academy of Sciences (India)

    ... exponential divisor ( G C E D ) and the least common exponential multiple ( L C E M ) do not always exist. In this paper we embed this poset in a lattice. As an application we study the G C E D and L C E M matrices, analogues of G C D and L C M matrices, which are both special cases of meet and join matrices on lattices.

  11. Development of solid-state joining technology of dissimilar metals using amorphous metastable alloy powders

    International Nuclear Information System (INIS)

    Lee, Min Ku; Rhee, Chang Kyu; Uhm, Young Rang; Park, Jin Ju; Lee, Jeong Gu; Kim, Gwang Ho; Hong, Sung Mo; Lee, Jong Geuk; Kim, Kyoung Ho

    2007-04-01

    Many nuclear components such as nozzles, steam generator, pipes, condensers, and heat exchangers require a realization of the reliable and high-performance joining or welding between the dissimilar metals or alloys, despite the fact that their melting points, thermal expansion coefficients and physical properties are quite different from each other. The conventional arc welding processes (SMAW, TIG), however, which is currently used as a welding process for NPP components, have not met the requirements of obtaining a reliable and high-quality dissimilar joints, as demonstrated from a number of the previously reported accidents or material failures in the welded joints. This originates from the various weaknesses of the arc welding processes (more than 1700 .deg. C) such as high residual stresses which is sensitive to SCC, porous or deformed joint structures, a formation of grain-coarsened HAZ and an induced degradation of the base metals in the vicinity of the joint. Moreover, they are not applicable to a joining of the dissimilar metals when their melting point or mechanical/physical properties are quite different. In this research, the low-temperature joining (700 .deg. C - 800 .deg. C) and simultaneously strong diffusion bonding technologies between the dissimilar Ti and Cu metals have been developed for the applications to the dissimilar joints of various nuclear tube components

  12. The Ku80 carboxy terminus stimulates joining and artemis-mediated processing of DNA ends.

    Science.gov (United States)

    Weterings, Eric; Verkaik, Nicole S; Keijzers, Guido; Florea, Bogdan I; Wang, Shih-Ya; Ortega, Laura G; Uematsu, Naoya; Chen, David J; van Gent, Dik C

    2009-03-01

    Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA-PK(CS)) and the XRCC4/ligase IV complex. Activation of the DNA-PK(CS) serine/threonine kinase requires an interaction with Ku70/80 and is essential for NHEJ-mediated DSB repair. In contrast to previous models, we found that the carboxy terminus of Ku80 is not absolutely required for the recruitment and activation of DNA-PK(CS) at DSBs, although cells that harbored a carboxy-terminal deletion in the Ku80 gene were sensitive to ionizing radiation and showed reduced end-joining capacity. More detailed analysis of this repair defect showed that DNA-PK(CS) autophosphorylation at Thr2647 was diminished, while Ser2056 was phosphorylated to normal levels. This resulted in severely reduced levels of Artemis nuclease activity in vivo and in vitro. We therefore conclude that the Ku80 carboxy terminus is important to support DNA-PK(CS) autophosphorylation at specific sites, which facilitates DNA end processing by the Artemis endonuclease and the subsequent joining reaction.

  13. The Ku80 Carboxy Terminus Stimulates Joining and Artemis-Mediated Processing of DNA Ends▿

    Science.gov (United States)

    Weterings, Eric; Verkaik, Nicole S.; Keijzers, Guido; Florea, Bogdan I.; Wang, Shih-Ya; Ortega, Laura G.; Uematsu, Naoya; Chen, David J.; van Gent, Dik C.

    2009-01-01

    Repair of DNA double-strand breaks (DSBs) is predominantly mediated by nonhomologous end joining (NHEJ) in mammalian cells. NHEJ requires binding of the Ku70-Ku80 heterodimer (Ku70/80) to the DNA ends and subsequent recruitment of the DNA-dependent protein kinase catalytic subunit (DNA-PKCS) and the XRCC4/ligase IV complex. Activation of the DNA-PKCS serine/threonine kinase requires an interaction with Ku70/80 and is essential for NHEJ-mediated DSB repair. In contrast to previous models, we found that the carboxy terminus of Ku80 is not absolutely required for the recruitment and activation of DNA-PKCS at DSBs, although cells that harbored a carboxy-terminal deletion in the Ku80 gene were sensitive to ionizing radiation and showed reduced end-joining capacity. More detailed analysis of this repair defect showed that DNA-PKCS autophosphorylation at Thr2647 was diminished, while Ser2056 was phosphorylated to normal levels. This resulted in severely reduced levels of Artemis nuclease activity in vivo and in vitro. We therefore conclude that the Ku80 carboxy terminus is important to support DNA-PKCS autophosphorylation at specific sites, which facilitates DNA end processing by the Artemis endonuclease and the subsequent joining reaction. PMID:19103741

  14. Influence of reduced glutathione on end-joining of DNA double-strand breaks: Cytogenetical and molecular approach

    Energy Technology Data Exchange (ETDEWEB)

    Ghoshal, Nitin [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India); Sharma, Sheetal [Department of Biochemistry, Indian Institute of Science, Bangalore, 560 012 (India); Banerjee, Atanu; Kurkalang, Sillarine [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India); Raghavan, Sathees C. [Department of Biochemistry, Indian Institute of Science, Bangalore, 560 012 (India); Chatterjee, Anupam, E-mail: chatterjeeanupam@hotmail.com [Molecular Genetics Laboratory, Department of Biotechnology & Bioinformatics, North-Eastern Hill University, Shillong, Meghalaya-793022 (India)

    2017-01-15

    Highlights: • DNA lesions induced by Blem and radiation interact well and form higher frequency of exchange aberrations. • Cellular level of glutathione does influence such interaction of DNA lesions. • Oligomer-based cell-free assay system demonstrated better end-joining efficiency at higher level of endogenous GSH. - Abstract: Radiation induced DNA double-strand breaks (DSB) are the major initial lesions whose misrejoining may lead to exchange aberrations. However, the role of glutathione (GSH), a major cellular thiol, in regulating cell’s sensitivity to DNA damaging agents is not well understood. Influence of endogenous GSH on the efficiency of X-rays and bleomycin (Blem) induced DNA DSBs end-joining has been tested here cytogenetically, in human lymphocytes and Hct116 cells. In another approach, oligomeric DNA (75 bp) containing 5′-compatible and non-compatible overhangs mimicking the endogenous DSB were for rejoining in presence of cell-free extracts from cells having different endogenous GSH levels. Frequency of aberrations, particularly exchange aberrations, was significantly increased when Blem was combined with radiation. The exchange aberration frequency was further enhanced when combined treatment was given at 4 °C since DNA lesions are poorly repaired at 4 °C so that a higher number of DNA breaks persist and interact when shifted from 4 °C to 37 °C. The exchange aberrations increased further when the combined treatment was given to Glutathione-ester (GE) pre-treated cells, indicating more frequent rejoining of DNA lesions in presence of higher cellular GSH. This is further supported by the drastic reduction in frequency of exchange aberrations but significant increase in incidences of deletions when combined treatment was given to GSH-depleted cells. End-joining efficiency of DNA DSBs with compatible ends was better than for non-compatible ends. End-joining efficiency of testicular and MCF7 cell extracts was better than that of lungs and

  15. Joining of polymer-metal lightweight structures using self-piercing riveting (SPR) technique: Numerical approach and simulation results

    Science.gov (United States)

    Amro, Elias; Kouadri-Henni, Afia

    2018-05-01

    Restrictions in pollutant emissions dictated at the European Commission level in the past few years have urged mass production car manufacturers to engage rapidly several strategies in order to reduce significantly the energy consumption of their vehicles. One of the most relevant taken action is light-weighting of body in white (BIW) structures, concretely visible with the increased introduction of polymer-based composite materials reinforced by carbon/glass fibers. However, the design and manufacturing of such "hybrid" structures is limiting the use of conventional assembly techniques like resistance spot welding (RSW) which are not transferable as they are for polymer-metal joining. This research aims at developing a joining technique that would eventually enable the assembly of a sheet molding compound (SMC) polyester thermoset-made component on a structure composed of several high strength steel grades. The state of the art of polymer-metal joining techniques highlighted the few ones potentially able to respond to the industrial challenge, which are: structural bonding, self-piercing riveting (SPR), direct laser joining and friction spot welding (FSpW). In this study, the promising SPR technique is investigated. Modelling of SPR process in the case of polymer-metal joining was performed through the building of a 2D axisymmetric FE model using the commercial code Abaqus CAE 6.10-1. Details of the numerical approach are presented with a particular attention to the composite sheet for which Mori-Tanaka's homogenization method is used in order to estimate overall mechanical properties. Large deformations induced by the riveting process are enabled with the use of a mixed finite element formulation ALE (arbitrary Lagrangian-Eulerian). FE model predictions are compared with experimental data followed by a discussion.

  16. Combustion Joining of Regolith Tiles for In-Situ Fabrication of Launch/Landing Pads on the Moon and Mars

    Science.gov (United States)

    Ferguson, Robert E.; Shafirovich, Evgeny; Mantovani, James G.

    2017-01-01

    To mitigate dust problems during launch/landing operations in lunar and Mars missions, it is desired to build solid pads on the surface. Recently, strong tiles have been fabricated from lunar regolith simulants using high-temperature sintering. The present work investigates combustion joining of these tiles through the use of exothermic intermetallic reactions. Specifically, nickel/aluminum (1:1 mole ratio) mixture was placed in a gap between the tiles sintered from JSC-1A lunar regolith simulant. Upon ignition by a laser, a self-sustained propagation of the combustion front over the mixture occurred. Joining was improved with increasing the tile thickness from 6.3 mm to 12.7 mm. The temperatures sufficient for melting the glass phase of JSC-1A were recorded for 12.7-mm tiles, which explains the observed better joining.

  17. Development and characterization of HIP joining techniques for Si3N4 materials

    International Nuclear Information System (INIS)

    Sun Woo, J.

    1991-09-01

    The report deals with the development and optimization of reproducible techniques for joining Si 3 N 4 with Si 3 N 4 without interlayers consisting of other materials, applying hot isostatic pressing and vacuum plasma spraying. Furthermore, experiments are reported that have been performed in addition to the above-mentioned, for preparing Si 3 N 4 sintered specimens without sintering additives, applying the HIP technique. The resulting specimens have been tested for their joining characteristics, which are reported. All reported experiments have been performed varying essential parameters such as HIP temperature, pressure, holding time, surface roughness, and heat treatment. Every parameter has been examined individually for its effect on the bonding strength of the prepared Si 3 N 4 -Si 3 N 4 joint, applying 4P bending tests at room temperature and at 1200deg C. (orig./MM) [de

  18. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)

    Science.gov (United States)

    Mathieu, Alexandre; Shabadi, Rajashekar; Deschamps, Alexis; Suery, Michel; Matteï, Simone; Grevey, Dominique; Cicala, Eugen

    2007-04-01

    Joining steel with aluminum involving the fusion of one or both materials is possible by laser beam welding technique. This paper describes a method, called laser braze welding, which is a suitable process to realize this structure. The main problem with thermal joining of steel/aluminum assembly with processes such as TIG or MIG is the formation of fragile intermetallic phases, which are detrimental to the mechanical performances of such joints. Braze welding permits a localized fusion of the materials resulting in a limitation on the growth of fragile phases. This article presents the results of a statistical approach for an overlap assembly configuration using a filler wire composed of 85% Zn and 15% Al. Tensile tests carried on these assemblies demonstrate a good performance of the joints. The fracture mechanisms of the joints are analyzed by a detailed characterization of the seams.

  19. The Use of Explosive Forming for Fastening and Joining Structural and Pressure Components

    Science.gov (United States)

    Schroeder, J. W.

    1985-01-01

    Explosive expansion of tubes into tubesheets has been used for over 20 years in the fabrication and repair of shell and tube heat exchangers. The use of explosives to perform these expansions has offered several distinct advantages over other methods. First, the process is fast and economical and can be performed with minimal training of personnel. Secondly, explosive forming does not cause the deleterious metallurgical effects which often result from other forming operations. In addition, the process can be performed remotely without the need for sophisticated handling equipment. The expansion of tubes into tubesheets is only one of many possible fastening and joining applications for which explosive forming can be used to achieve highly successful results. The explosive forming process and where it has been used are described. In addition, some possible adaptations to other joining applications are identified and discussed.

  20. Assessment of anosognosia in persons with frontal lobe damage: clinical utility of the Mayo-Portland Adaptability Inventory (MPAI).

    Science.gov (United States)

    Murrey, G J; Hale, F M; Williams, J D

    2005-08-10

    To determine if the Mayo-Portland Adaptability Inventory (MPAI) demonstrates clinical utility in differentiating between persons with severe TBI and frontal lobe damage/anosognosia and persons with mild TBI and no frontal lobe damage. Forty-three persons with TBI and documented frontal lobe damage (mean age = 34; mean time since injury = 5.2 years) and 69 persons with mild TBI and no frontal lobe damage (mean age = 34.3; mean time since injury = 4.8 4.8 years). MPAI. Total inventory and select sub-category difference scores were significantly greater in the frontal lobe group than in the non-frontal lobe group. However, as expected, there was no significant difference between the two groups on the mobility sub-category difference scores. The MPAI appears to be potentially clinically useful in assessing for frontal lobe damage and associated anosognosia in patients with TBI.

  1. Incidencia de anemia ferropénica y factores asociados en las gestantes del distrito de Rapayan, Ancash, Perú: Periodo mayo 2010 - marzo 2011

    OpenAIRE

    Vite Gutiérrez, Flor Yessenia

    2011-01-01

    Objetivo: Conocer la incidencia de anemia ferropénica y factores asociados en la gestación en el distrito de Rapayan, Ancash, Perú. Material y método: estudio prospectivo, analítico y longitudinal en 39 gestantes del distrito de Rapayán, provincia de Huari, departamento de Ancash, Perú durante el periodo comprendido entre mayo 2010 y marzo del 2011. Se procedió a tomar muestras de sangre del total de la muestra n= 39 gestantes, durante los tres trimestres con el fin de controlar los niveles d...

  2. Laryngeal Schwannoma: A Case Presentation and Review of the Mayo Clinic Experience.

    Science.gov (United States)

    Romak, Jonathan J; Neel, H Bryan; Ekbom, Dale C

    2017-01-01

    The aim of this study was to clarify the nature of laryngeal schwannomas through review of the experience of a single institution during a 104-year period. This is a retrospective case series. The Mayo Clinic, Rochester, Minnesota clinical and surgical pathology database was reviewed for the years 1985-2011. Four cases of laryngeal schwannoma were identified. These cases were pooled with a previously published series of laryngeal schwannomas treated at our institution between 1907 and 1986. The characteristics of all 11 cases were studied, and relevant literature was reviewed. A total of 11 cases of schwannoma of the larynx were identified. The mean age at presentation was 48 years (range 12-73 years). The most common presenting symptoms were dysphonia and dysphagia. The most frequently involved primary site was the false vocal fold (six patients), followed by the aryepiglottic fold (three), epiglottis (two), subglottis (two), ventricle (one), true vocal fold (one) and postcricoid region (one). The mean maximal tumor diameter was 2.5 cm. In all but one case, surgical excision was curative with no recurrence during recorded follow up ranging from 1 to 17 years. Laryngeal schwannomas, although rare, should be considered in the differential diagnosis of laryngeal tumors. They occur most frequently in the false vocal fold and present most commonly with dysphonia and/or dysphagia. Surgical excision is the treatment of choice. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  3. Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

    KAUST Repository

    Amer, Abdelhalim

    2013-01-01

    Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution models on this type of architecture at the level of task parallelism. For this purpose, we use a highly optimized fork-join based implementation of the FMM and extend it to a data-driven implementation using a distributed task scheduling approach. This study exposes some limitations of the conventional fork-join implementation in terms of synchronization overheads. We find that these are not negligible and their elimination by the data-driven method, with a careful data locality strategy, was beneficial. Experimental evaluation of both methods on state-of-the-art multi-socket multi-core architectures showed up to 22% speed-ups of the data-driven approach compared to the original method. We demonstrate that a data-driven execution of FMM not only improves performance by avoiding global synchronization overheads but also reduces the memory-bandwidth pressure caused by memory-intensive computations. © 2013 Springer-Verlag.

  4. FRESNO State joins exploration of new frontiers in physics

    CERN Multimedia

    2008-01-01

    California State University, Fresno has joined a prestigious collaboration of top physicists, giving the Department of Physics' students, faculty and staff access to the most up-to-date information possible on new frontiers in the science for the next 15 years or longer. The program is the ATLAS (an acronym for A Toroidal LHC ApparatuS) Experiment, which makes use of the Large Hadron Collider (LHC) under construction at the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. (CERN also gave birth to the World Wide Web.)

  5. Ultrapulse welding: A new joining technique. [for automotive industry

    Science.gov (United States)

    Anderson, D. G.

    1972-01-01

    The ultrapulse process is a resistance welding process that utilizes unidirectional current of high magnitude for a very short time with a precisely controlled dynamic force pulse. Peak currents of up to 220,000 amperes for two to ten milliseconds are used with synchronized force pulses of up to nine thousand pounds. The welding current passing through the relatively high resistance of the interface between the parts that are being joined results in highly localized heating. Described is the UPW process as it applies to the automotive industry.

  6. Effective Assessments of Integrated Animations--Exploring Dynamic Physics Instruction for College Students' Learning and Attitudes

    Science.gov (United States)

    Su, King-Dow; Yeh, Shih-Chuan

    2014-01-01

    The purpose of this study was to give effective assessments of three major physics animations to upgrade college students' learning achievements and attitudes. All college participants were taken from mechanical and civil engineering departments who joined this physics course during the 2011 academic year. Three prime objectives of physics…

  7. Pulsed Joining Of Body-In-White Components

    Energy Technology Data Exchange (ETDEWEB)

    Bonnen, John [Ford Motor Company, Dearborn, MI (United States)

    2014-09-30

    The objective of this project was to develop cost efficient high quality pulsed welding (PW) technology for joining 6xxx Aluminum and High Strength Steel (with tensile strength above 580MPa) components enabling broad usage of hydroformed parts and leading to substantial weight reduction of cars and trucks to reduce US demand on petroleum, lower carbon emissions and energy expenditures. In general, pulsed welding is a form of impact welding where two dissimilar metal pieces are joined by accelerating one to velocities exceeding 300m/s at which point the first piece strikes the second and forms a weld. In this work, two methods were used to accelerate the flyer material: Electro-Magnetic (EM) pulse and Electro-Hydraulic (EH) pulse launching. The advantage of pulsed welding techniques is that welds can be formed between two materials that cannot otherwise be welded: high strength aluminum and high strength steel. The technical objectives of the project included: 1) developing cost affordable production feasible tooling design for PW of 6xxx aluminum to High Strength steel with strengths above 580MPa; 2) demonstrating that fabricated joints can exceed the required service load strength initially at the coupon level and then at the component level; 3) developing fundamental understanding of the mechanisms of joint formation and conditions leading to formation of high quality PW joint; and 4) creating a numerical model predicting the tooling and electric discharge parameters necessary for the joint formation and that satisfy the targeted strength parameters. The project successfully developed: 1) EM and EH pulsed welds between high strength aluminum with tensile strengths exceeding 240MPa and steels exceeding 580MPa; 2) pulsed welds of extrusions with strengths exceeding project requirements; 3) EM and EH flyer launch models and 4) weld interface formation models. However, the grant holder, Ford Motor Company, could see no path to commercialization and the work was

  8. COMPUTER-ASSISTED VOCABULARY LEARNING: THE POWER OF GAMING ON STUDENTS’ ENGLISH VOCABULARY ACHIEVEMENT

    Directory of Open Access Journals (Sweden)

    Yune Andryani Pinem

    2017-04-01

    Full Text Available The main objective of this study was to find out whether the power of gaming contributed to vocabulary learning and gave significant upgrading in students‘ vocabulary scores through its comparison to the dull and routine vocabulary learning. The subjects, two groups of Indonesian students, were tested in a pre-test before joining two different methods of vocabulary learning, and finally were tested in a post-test. Data were collected from the students‘ pre-test and post-test scores. From the comparison of these two groups‘ data, the output proved that the vocabulary class using ―Little Shop of Treasure‖ online games was better in boosting students‘ scores.

  9. Refining a measure of brain injury sequelae to predict postacute rehabilitation outcome: rating scale analysis of the Mayo-Portland Adaptability Inventory.

    Science.gov (United States)

    Malec, J F; Moessner, A M; Kragness, M; Lezak, M D

    2000-02-01

    Evaluate the psychometric properties of the Mayo-Portland Adaptability Inventory (MPAI). Rating scale (Rasch) analysis of MPAI and principal component analysis of residuals; the predictive validity of the MPAI measures and raw scores was assessed in a sample from a day rehabilitation program. Outpatient brain injury rehabilitation. 305 persons with brain injury. A 22-item scale reflecting severity of sequelae of brain injury that contained a mix of indicators of impairment, activity, and participation was identified. Scores and measures for MPAI scales were strongly correlated and their predictive validities were comparable. Impairment, activity, and participation define a single dimension of brain injury sequelae. The MPAI shows promise as a measure of this construct.

  10. Researchers and Teachers Learning Together and from Each Other Using Video-Based Multimodal Analysis

    Science.gov (United States)

    Davidsen, Jacob; Vanderlinde, Ruben

    2014-01-01

    This paper discusses a year-long technology integration project during which teachers and researchers joined forces to explore children's collaborative activities through the use of touch screens. In the research project discussed in this paper, 16 touch screens were integrated into teaching and learning activities in two separate classrooms;…

  11. 12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

    Science.gov (United States)

    2010-01-01

    ..._Code Relationship CodeThe code indicating how the customer is related to the account. Possible values... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Deposit-Customer Join File Structure G Appendix... GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

  12. Cosmonaut Aleksey Leonov joins belly dancer on stage at Folklife Festival

    Science.gov (United States)

    1974-01-01

    Cosmonaut Aleksey A. Leonov, in one of the lighter moments of activity involving Soviet Cosmonauts and American Astronauts, joins a belly dancer on stage as several visitors to weekend activity at the site of San Antonio's HemisFair look on. Leonov is commander of the Soviet Apollo Soyuz Test Project (ASTP) crew. The Lebanese dancing was just one feature among many during the Texas Folklife Festival.

  13. Perancangan Training dengan E-Learning pada Perusahaan Manufacture

    Directory of Open Access Journals (Sweden)

    Agus Putranto

    2011-06-01

    Full Text Available The use of information technology has been very widely in many fields including industry. Along with that, the need for a concept and mechanism of IT-based learning becomes inevitable. The purpose of this paper is to analyze the training process and identify any related problems occurred at PT.Suzuki Indomobil Motor. The problems are about the limited training time, lack of material distribution media and consultations out of training time. E-Learning is a concept of electronic application use to support learning using the internet and computer network. This concept influences the process of conventional education transformation to digital form, both in content and system. The learning system will be replaced with a web-based training media. The method used is the Object Oriented Analysis Design, which begins with a depiction of rich pictures to the Deployment diagram. This system is expected to meet the needs of employees while joining the training process, so that they will obtain excellent learning and achieve the company objectives. 

  14. Thermal characterisation of ceramic/metal joining techniques for fusion applications using X-ray tomography

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Ll.M., E-mail: llion.evans@ccfe.ac.uk [School of Materials, University of Manchester, Grosvenor Street, Manchester M1 7HS (United Kingdom); Margetts, L. [School of Earth, Atmospheric and Environmental Sciences, University of Manchester, Williamson Building, Manchester M13 9PL (United Kingdom); Casalegno, V. [Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy); Leonard, F.; Lowe, T.; Lee, P.D. [School of Materials, University of Manchester, Grosvenor Street, Manchester M1 7HS (United Kingdom); Schmidt, M.; Mummery, P.M. [School of Mechanical, Aerospace and Civil Engineering (MACE), University of Manchester, Manchester M13 9PL (United Kingdom)

    2014-06-15

    This work investigates the thermal performance of four novel CFC–Cu joining techniques. Two involve direct casting and brazing of Cu onto a chromium modified CFC surface, the other two pre-coat a brazing alloy with chromium using galvanisation and sputtering processes. The chromium carbide layer at the interface has been shown to improve adhesion. Thermal conductivity across the join interface was measured by laser flash analysis. X-ray tomography was performed to investigate micro-structures that might influence the thermal behaviour. It was found that thermal conductivity varied by up to 72%. Quantification of the X-ray tomography data showed that the dominant feature in reducing thermal conductivity was the lateral spread of voids at the interface. Correlations were made to estimate the extent of this effect.

  15. Construction and Evaluation of Scenarios as a Learning Strategy through Modelling-Simulation

    Directory of Open Access Journals (Sweden)

    Juan Luis Peñaloza Figueroa

    2014-12-01

    Full Text Available From a systemic perspective and in the context of an increasing generalization in the use of new technologies and the change in the educational paradigm -which emphasizes guided and autonomous learning-, the learning strategy should be routed to join logical reasoning and instrumental skills (software. The inclusion of new computing and communication resources to the learning process turns them into teaching tools, which makes it possible to organize the teaching and learning process in a different way. The design of these new scenarios of study has important implications to the way information is processed, to the different levels of learning (descriptive, explanatory or analytical ones and to the way knowledge is acquired and evaluated. In addition, that design takes into account the greater student-content, student-student and student-teacher interactivities, always emphasizing guided independent learning. Thus, the construction, analysis and evaluation of scenarios through models and simulation are the strategy that best suits the current learning style followed by students.

  16. Outcome prediction in home- and community-based brain injury rehabilitation using the Mayo-Portland Adaptability Inventory.

    Science.gov (United States)

    Malec, James F; Parrot, Devan; Altman, Irwin M; Swick, Shannon

    2015-01-01

    The objective of the study was to develop statistical formulas to predict levels of community participation on discharge from post-hospital brain injury rehabilitation using retrospective data analysis. Data were collected from seven geographically distinct programmes in a home- and community-based brain injury rehabilitation provider network. Participants were 642 individuals with post-traumatic brain injury. Interventions consisted of home- and community-based brain injury rehabilitation. The main outcome measure was the Mayo-Portland Adaptability Inventory (MPAI-4) Participation Index. Linear discriminant models using admission MPAI-4 Participation Index score and log chronicity correctly predicted excellent (no to minimal participation limitations), very good (very mild participation limitations), good (mild participation limitations), and limited (significant participation limitations) outcome levels at discharge. Predicting broad outcome categories for post-hospital rehabilitation programmes based on admission assessment data appears feasible and valid. Equations to provide patients and families with probability statements on admission about expected levels of outcome are provided. It is unknown to what degree these prediction equations can be reliably applied and valid in other settings.

  17. Austria Declares Intent To Join ESO

    Science.gov (United States)

    2008-04-01

    At a press conference today at the University of Vienna's Observatory, the Austrian Science Minister Johannes Hahn announced the decision by the Austrian Government to seek membership of ESO from 1 July this year. ESO PR Photo 11/08 ESO PR Photo 11/08 Announcing Austria's Intent to Join ESO Said Minister Hahn: "With membership of ESO, Austria's scientists will receive direct access to the world's leading infrastructure in astronomy. This strengthens Austria as a place for research and provides an opportunity for young researchers to continue their work from here. With this move, Austria takes an important step in the reinforcement of Europe's science and research infrastructure." The decision constitutes a major breakthrough for Austrian scientists who have argued for membership of ESO for many years. Seeking membership in ESO also marks a step towards the further development of the European Research and Innovation Area, an important element of Europe's so-called Lisbon Strategy. "ESO welcomes the Austrian bid to join our organisation. I salute the Austrian Government for taking this important step and look forward to working closely with our Austrian friends and colleagues in the years to come," commented the ESO Director General, Tim de Zeeuw. For Austrian astronomers, ESO membership means not only unrestricted access to ESO's world-leading observational facilities including the world's most advanced optical telescope, the Very Large Telescope, and full participation in the quasi-global ALMA project, but also the possibility to participate on a par with their European colleagues in the future projects of ESO, including the realisation of ESO's Extremely Large Telescope project (E-ELT), which is currently in the design phase. All these projects require some of the most advanced technologies in key areas such as optics, detectors, lightweight structures, etc. Austrian participation in ESO opens the door for Austrian industry and major research institutes of the

  18. Parallel multi-join query optimization algorithm for distributed sensor network in the internet of things

    Science.gov (United States)

    Zheng, Yan

    2015-03-01

    Internet of things (IoT), focusing on providing users with information exchange and intelligent control, attracts a lot of attention of researchers from all over the world since the beginning of this century. IoT is consisted of large scale of sensor nodes and data processing units, and the most important features of IoT can be illustrated as energy confinement, efficient communication and high redundancy. With the sensor nodes increment, the communication efficiency and the available communication band width become bottle necks. Many research work is based on the instance which the number of joins is less. However, it is not proper to the increasing multi-join query in whole internet of things. To improve the communication efficiency between parallel units in the distributed sensor network, this paper proposed parallel query optimization algorithm based on distribution attributes cost graph. The storage information relations and the network communication cost are considered in this algorithm, and an optimized information changing rule is established. The experimental result shows that the algorithm has good performance, and it would effectively use the resource of each node in the distributed sensor network. Therefore, executive efficiency of multi-join query between different nodes could be improved.

  19. An empirical study on SAJQ (Sorting Algorithm for Join Queries

    Directory of Open Access Journals (Sweden)

    Hassan I. Mathkour

    2010-06-01

    Full Text Available Most queries that applied on database management systems (DBMS depend heavily on the performance of the used sorting algorithm. In addition to have an efficient sorting algorithm, as a primary feature, stability of such algorithms is a major feature that is needed in performing DBMS queries. In this paper, we study a new Sorting Algorithm for Join Queries (SAJQ that has both advantages of being efficient and stable. The proposed algorithm takes the advantage of using the m-way-merge algorithm in enhancing its time complexity. SAJQ performs the sorting operation in a time complexity of O(nlogm, where n is the length of the input array and m is number of sub-arrays used in sorting. An unsorted input array of length n is arranged into m sorted sub-arrays. The m-way-merge algorithm merges the sorted m sub-arrays into the final output sorted array. The proposed algorithm keeps the stability of the keys intact. An analytical proof has been conducted to prove that, in the worst case, the proposed algorithm has a complexity of O(nlogm. Also, a set of experiments has been performed to investigate the performance of the proposed algorithm. The experimental results have shown that the proposed algorithm outperforms other Stable–Sorting algorithms that are designed for join-based queries.

  20. Selective joining technique for high power electronics; Selektive Verbindungstechnik fuer die Leistungselektronik

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbach, Manfred [EUTECT GmbH, Dusslingen (Germany)

    2012-11-01

    Stringent demands are placed on the quality, reliability and workmanship of electronic components in modern automotive electronics, high-performance LEDs (HLEDs) and regenerative electrical power generation. Automated selective integrated circuit packaging processes are increasingly becoming irreplaceable. Integrated circuit packing can be performed by means of mini-wave, laser, iron or hot-bar soldering, as well as the micro welding process. In addition to the modification of existing technologies, this also requires new joining technologies and test strategies for quality assurance. Interdisciplinary expertise with regard to process technology and system function is therefore essential for sound process assurance, maximum effectiveness and added value in the joining process. This article addresses the processing of THT electronics assemblies in the areas of printed-circuit boards, LEDs, flex foils, leadframes, hybrids and special types. Using high-power LED processes as examples, integrated circuit packaging is described for IMS, Osram Philips, Samsung and further LED designs, as well as printed-circuit board, flex-foil and jumper connections to the associated LED heat sinks. (orig.)

  1. Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model

    OpenAIRE

    Ipsha Singh; K Chandrasekharan Nair; Jayakar Shetty

    2017-01-01

    Aim: The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. Materials and Methods: A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. Un...

  2. Detection and Repair of Ionizing Radiation-Induced DNA Double Strand Breaks: New Developments in Nonhomologous End Joining

    International Nuclear Information System (INIS)

    Wang, Chen; Lees-Miller, Susan P.

    2013-01-01

    DNA damage can occur as a result of endogenous metabolic reactions and replication stress or from exogenous sources such as radiation therapy and chemotherapy. DNA double strand breaks are the most cytotoxic form of DNA damage, and defects in their repair can result in genome instability, a hallmark of cancer. The major pathway for the repair of ionizing radiation-induced DSBs in human cells is nonhomologous end joining. Here we review recent advances on the mechanism of nonhomologous end joining, as well as new findings on its component proteins and regulation

  3. Detection and Repair of Ionizing Radiation-Induced DNA Double Strand Breaks: New Developments in Nonhomologous End Joining

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Chen [Departments of Biochemistry and Molecular Biology and Oncology, and Southern Alberta Cancer Research Institute, University of Calgary, Calgary (Canada); Lees-Miller, Susan P., E-mail: leesmill@ucalgary.ca [Departments of Biochemistry and Molecular Biology and Oncology, and Southern Alberta Cancer Research Institute, University of Calgary, Calgary (Canada)

    2013-07-01

    DNA damage can occur as a result of endogenous metabolic reactions and replication stress or from exogenous sources such as radiation therapy and chemotherapy. DNA double strand breaks are the most cytotoxic form of DNA damage, and defects in their repair can result in genome instability, a hallmark of cancer. The major pathway for the repair of ionizing radiation-induced DSBs in human cells is nonhomologous end joining. Here we review recent advances on the mechanism of nonhomologous end joining, as well as new findings on its component proteins and regulation.

  4. Learn Java for Android Development

    CERN Document Server

    Friesen, J

    2010-01-01

    Android development is hot, and many programmers are interested in joining the fun. However, because this technology is based on Java, you should first obtain a solid grasp of the Java language and its foundational APIs to improve your chances of succeeding as an Android app developer. After all, you will be busy learning the architecture of an Android app, the various Android-specific APIs, and Android-specific tools. If you do not already know Java fundamentals, you will probably end up with a massive headache from also having to quickly cram those fundamentals into your knowledge base. Lear

  5. The Enforcement Of The E-Learning Activities Under The Framework Of ANENT (Asian Network For Education In Nuclear Technology): Blended Leaning And E-Learning

    Energy Technology Data Exchange (ETDEWEB)

    Rho, Sipyo; Nam, Youngmi; Hwang, Hyeseon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The IAEA (International Atomic Energy Agency) had declared the nuclear Knowledge should be managed and reserved to well to prevent cutting form old generation just retiring to young generation who had little interest about nuclear technology. In this background, ANENT (Asian Network for Education in Nuclear Technology)1), supported by the IAEA, had been organized as a partnership among Asian countries in 2004. Presently, including China, Japan, and Korea 19 Member states are joined and it does various activities to share the nuclear science and technology through the yearly coordination meeting, train the trainer workshop for to enforce e-Learning activities among member states. The IAEA (International Atomic Energy Agency) had declared the nuclear Knowledge should be managed and reserved to well to prevent cutting form old generation just retiring to young generation who had little interest about nuclear technology. In this background, ANENT (Asian Network for Education in Nuclear Technology)1), supported by the IAEA, had been organized as a partnership among Asian countries in 2004. Presently, including China, Japan, and Korea 19 Member states are joined and it does various activities to share the nuclear science and technology through the yearly coordination meeting, train the trainer workshop for to enforce e-Learning activities among member states.

  6. The Enforcement Of The E-Learning Activities Under The Framework Of ANENT (Asian Network For Education In Nuclear Technology): Blended Leaning And E-Learning

    International Nuclear Information System (INIS)

    Rho, Sipyo; Nam, Youngmi; Hwang, Hyeseon

    2016-01-01

    The IAEA (International Atomic Energy Agency) had declared the nuclear Knowledge should be managed and reserved to well to prevent cutting form old generation just retiring to young generation who had little interest about nuclear technology. In this background, ANENT (Asian Network for Education in Nuclear Technology)1), supported by the IAEA, had been organized as a partnership among Asian countries in 2004. Presently, including China, Japan, and Korea 19 Member states are joined and it does various activities to share the nuclear science and technology through the yearly coordination meeting, train the trainer workshop for to enforce e-Learning activities among member states. The IAEA (International Atomic Energy Agency) had declared the nuclear Knowledge should be managed and reserved to well to prevent cutting form old generation just retiring to young generation who had little interest about nuclear technology. In this background, ANENT (Asian Network for Education in Nuclear Technology)1), supported by the IAEA, had been organized as a partnership among Asian countries in 2004. Presently, including China, Japan, and Korea 19 Member states are joined and it does various activities to share the nuclear science and technology through the yearly coordination meeting, train the trainer workshop for to enforce e-Learning activities among member states

  7. Symmetric bends how to join two lengths of cord

    CERN Document Server

    Miles, Roger E

    1995-01-01

    A bend is a knot securely joining together two lengths of cord (or string or rope), thereby yielding a single longer length. There are many possible different bends, and a natural question that has probably occurred to many is: "Is there a 'best' bend and, if so, what is it?"Most of the well-known bends happen to be symmetric - that is, the two constituent cords within the bend have the same geometric shape and size, and interrelationship with the other. Such 'symmetric bends' have great beauty, especially when the two cords bear different colours. Moreover, they have the practical advantage o

  8. Guided elastic waves produced by a periodically joined interface in a rock mass

    CSIR Research Space (South Africa)

    Yenwong Fai

    2012-09-01

    Full Text Available on Computational and Applied Mechanics SACAM2012 Johannesburg, South Africa, 3−5 September 2012 c©SACAM Guided Elastic Waves Produced by a Periodically Joined Interface in a Rock Mass A.S. Yenwong Fai School of Physics University of the Witwatersrand Johannesburg...

  9. Gaussian Random Fields Methods for Fork-Join Network with Synchronization Constraints

    Science.gov (United States)

    2014-12-22

    substantial efforts were dedicated to the study of the max-plus recursions [21, 3, 12]. More recently, Atar et al. [2] have studied a fork-join...feedback and NES, Atar et al. [2] show that a dynamic priority discipline achieves throughput optimal- ity asymptotically in the conventional heavy...2011) Patient flow in hospitals: a data-based queueing-science perspective. Submitted to Stochastic Systems, 20. [2] R. Atar , A. Mandelbaum and A

  10. Joining of Cu-Mg-Mn Aluminum Alloy with Linear Friction Welding

    OpenAIRE

    A. Medvedev; V. Bychkov; A. Selivanov; Yu. J. Ershova; B. Bolshakov; I.V. Alexаndrov; F. F. Musin

    2014-01-01

    Al-Cu-Mg-Mn alloy samples were joined together with linear friction welding in two conditions, as is, without pretreatment, and after etching the welding interface. The effect of the welding interface condition was evaluated based on microstructure analysis, microhardness and tensile testing at room temperature. Also, the temperature distribution during welding was estimated with an analytical one-dimensional heat conduction model of the welding process and welding process data

  11. Childhood exposure to violence and lifelong health: Clinical intervention science and stress biology research join forces

    Science.gov (United States)

    Moffitt, Terrie E.

    2013-01-01

    Many young people who are mistreated by an adult, victimized by bullies, criminally assaulted, or who witness domestic violence react to this violence exposure by developing behavioral, emotional, or learning problems. What is less well known is that adverse experiences like violence exposure can lead to hidden physical alterations inside a child’s body, alterations which may have adverse effects on life-long health. We discuss why this is important for the field of developmental psychopathology and for society, and we recommend that stress-biology research and intervention science join forces to tackle the problem. We examine the evidence base in relation to stress-sensitive measures for the body (inflammatory reactions, telomere erosion, epigenetic methylation, and gene expression) and brain (mental disorders, neuroimaging, and neuropsychological testing). We also review promising interventions for families, couples, and children that have been designed to reduce the effects of childhood violence exposure. We invite intervention scientists and stress-biology researchers to collaborate in adding stress-biology measures to randomized clinical trials of interventions intended to reduce effects of violence exposure and other traumas on young people. PMID:24342859

  12. Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

    Science.gov (United States)

    Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

    Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

  13. Joining thick section aluminum to steel with suppressed FeAl intermetallic formation via friction stir dovetailing

    Energy Technology Data Exchange (ETDEWEB)

    Reza-E-Rabby, Md.; Ross, Kenneth; Overman, Nicole R.; Olszta, Matthew J.; McDonnell, Martin; Whalen, Scott A.

    2018-04-01

    A new solid-phase technique called friction stir dovetailing (FSD) has been developed for joining thick section aluminum to steel. In FSD, mechanical interlocks are formed at the aluminum-steel interface and are reinforced by metallurgical bonds where intermetallic growth has been uniquely suppressed. Lap shear testing shows superior strength and extension at failure compared to popular friction stir approaches where metallurgical bonding is the only joining mechanism. High resolution microscopy revealed the presence of a 40-70 nm interlayer having a composition of 76.4 at% Al, 18.4 at% Fe, and 5.2 at% Si, suggestive of limited FeAl3 intermetallic formation.

  14. Software Socrative and smartphones as tools for implementation of basic processes of active physics learning in classroom: An initial feasibility study with prospective teachers

    OpenAIRE

    Méndez, David; Slisko, Josip

    2013-01-01

    Many physics professors have difficulties to know andassess in real time the learning of the students in their courses.Nevertheless, today, with Internet and the new technology devices that thestudents use every day, like smartphones, such tasks can be carried outrelatively easy. The professor pose a few questions in Socrative, the students answer them by means of the Smartphone. Inthis way, the professor knows what students learned and can promote thecooperative learning joining students who...

  15. Joining of molybdenum disilicide to stainless steel using amorphous metal brazes - residual stress analysis

    Energy Technology Data Exchange (ETDEWEB)

    Vaidya, R.U.; Gallegos, D.E.; Kautz, D.D. [Los Alamos National Lab. (United States)

    2007-07-01

    Molybdenum disilicide (MoSi{sub 2})/stainless steel 316 L joints were produced by high temperature brazing using a cobalt-based metallic-glass (METGLAS trademark 2714A). Successful joining was completed in two different ways; either by feeding excess braze into the braze gap upon heating or by constraining the MoSi{sub 2}/stainless steel assembly with an alumina (Al{sub 2}O{sub 3}) fixture during the heating cycle. These steps were necessary to ensure the production of a high quality void free joint. Residual stress measurements were completed on these joints. Indentation results show higher tensile residual stresses in the stainless steel for the joint with the external constraint, in comparison to the unconstrained state. In contrast, the compressive residual stresses in the MoSi{sub 2} (as measured by X-ray diffraction) were lower in the constrained state relative to the unconstrained state. These results and a lack of residual stress balance indicate that the stress state in the braze is significantly different under the two joining conditions and the volume of the braze plays an important role in the development of the residual stresses. Push-out tests carried out on these joints gave higher joint strengths in the unconstrained as compared to the constrained condition. The results of this study have important implications on the selection of the appropriate joining process (use of constraint versus extra braze). (orig.)

  16. Learning Cultures in Travel and Tourism: A Critique of Manuela du Bois-Reymond's Trendsetter Learner Thesis

    Science.gov (United States)

    Morrison, Andrew

    2011-01-01

    This article aims to contribute to the discussion surrounding Manuela du Bois-Reymond's important "trendsetter learner" thesis and, in so doing, to join the wider debate about post-compulsory learning cultures. The article outlines the trendsetter learner thesis and then considers recent criticisms that it has attracted. While the author…

  17. Electrically conductive ceramics and new joining technology for applications in HTR engineering

    International Nuclear Information System (INIS)

    Hille, Carmen; Lippmann, Wolfgang; Hurtado, Antonio

    2012-01-01

    Ceramic constructional components are quite extensively required for operation of high-temperature nuclear reactors. Functional ceramics, in addition to constructional ceramics, are increasingly coming into the focus of research. Ceramic materials are predestined for use at high temperatures and in corrosive atmospheres. Modification of silicon carbide (SiC) by targeted doping, for instance, produces a suitable material for the production of heating conductors and thermoelectric generators. As a construction material, silicon carbide (SiC) is especially interesting due to its very good thermal, mechanical and radiological properties. SiC, furthermore, performs well when activated by neutron irradiation, with the induced activation subsiding after only a few hours (). This property vector makes it an ideal starting material for use in a wide range of functional elements in high-temperature power engineering, particularly in high-temperature nuclear reactor engineering (e.g. V/HTR) including thermochemical plants for hydrogen generation or Synfuel production. In principle, it is possible to produce all-ceramic assemblies consisting of a thermoelectric generator and a sensor that can provide reliable measurement signals under extreme conditions in the high-temperature range without external power supply. This paper explains the feasibility of laser-joining such modified non-oxide ceramics, how to make electrically conductive joints, and thus, how to design complex assemblies. The parameters required for an optimal laser process to join ceramic materials were determined in extensive preliminary experiments. These investigations focused on the specific electrical resistances and optical properties. Specifically developed brazing fillers were fine-tuned so that the joints of the ceramics improved in terms of their physical interactions, chemical reactions and ability to bond or key chemically and mechanically with the ceramic surfaces. Thereby, the electrical

  18. Electrically conductive ceramics and new joining technology for applications in HTR engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hille, Carmen, E-mail: carmen.hille@ilkdresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany); Lippmann, Wolfgang, E-mail: wolfgang.lippmann@tu-dresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany); Hurtado, Antonio, E-mail: antonio.hurtado@tu-dresden.de [Dresden University of Technology (TU Dresden), Institute of Power Engineering, Chair of Hydrogen Technology and Nuclear Power Engineering, George-Baehr-Str. 3b, D-01062 Dresden (Germany)

    2012-10-15

    Ceramic constructional components are quite extensively required for operation of high-temperature nuclear reactors. Functional ceramics, in addition to constructional ceramics, are increasingly coming into the focus of research. Ceramic materials are predestined for use at high temperatures and in corrosive atmospheres. Modification of silicon carbide (SiC) by targeted doping, for instance, produces a suitable material for the production of heating conductors and thermoelectric generators. As a construction material, silicon carbide (SiC) is especially interesting due to its very good thermal, mechanical and radiological properties. SiC, furthermore, performs well when activated by neutron irradiation, with the induced activation subsiding after only a few hours (). This property vector makes it an ideal starting material for use in a wide range of functional elements in high-temperature power engineering, particularly in high-temperature nuclear reactor engineering (e.g. V/HTR) including thermochemical plants for hydrogen generation or Synfuel production. In principle, it is possible to produce all-ceramic assemblies consisting of a thermoelectric generator and a sensor that can provide reliable measurement signals under extreme conditions in the high-temperature range without external power supply. This paper explains the feasibility of laser-joining such modified non-oxide ceramics, how to make electrically conductive joints, and thus, how to design complex assemblies. The parameters required for an optimal laser process to join ceramic materials were determined in extensive preliminary experiments. These investigations focused on the specific electrical resistances and optical properties. Specifically developed brazing fillers were fine-tuned so that the joints of the ceramics improved in terms of their physical interactions, chemical reactions and ability to bond or key chemically and mechanically with the ceramic surfaces. Thereby, the electrical

  19. Students' Perspectives on the Design and Implementation of a Blended Synchronous Learning Environment

    Science.gov (United States)

    Wang, Qiyun; Huang, Changquin; Quek, Choon Lang

    2018-01-01

    This study investigated a blended synchronous learning environment (BSLE), which was designed for a group of master's students taking a course at a teacher education institute. The BSLE was created for the majority of the students to attend the course face-to-face and at the same time allowed the rest to join the identical sessions using…

  20. Cigarette smoking and health care professionals at Mayo Hospital, Lahore, Pakistan

    International Nuclear Information System (INIS)

    Malik, A.K.; Chaudhry, A.; Karamat, A.; Arif, N.; Cheema, M.A.; Rauf, A.

    2010-01-01

    Objectives: To observe the frequency of cigarette smoking in doctors and paramedics and study various variables associated with it. Methods: An anonymous questionnaire was given to randomly selected 250 Doctors and 250 Paramedics at Mayo Hospital in 2009. Information about demographic characteristics, smoking status in family, number of cigarettes smoked per day, influence for starting smoking, reason for continuation of smoking and use of nicotine replacement therapy was obtained. Results: A total of 234 questionnaires from doctors and 207 from paramedics were received back (88.2% response rate). There were 280 males (163 Doctors; 117 Paramedics) and 161 females (71 Doctors; 90 Paramedics). Eighty seven (37.18%) Doctors and 74 (35.74%) Paramedics were smokers with 82 (50.31%) male doctors and 5 (7.04%) females. Similar results were obtained in Paramedics 72 (61.53%) males and 2 (2.22%) females. Of the smokers, majority started smoking between 11-20 years age with 39 (44.83%) Doctors and 48 (64.86%) Paramedics. Twenty three (26.44%) Doctors and 31 (41.89%) Paramedics smoked 11-20 cigarettes per day. Smoking was initiated due to the influence of friends by 48 (55.17%) Doctors and 56 (75.68%) Paramedics. Most smokers, 29 (33.33%) Doctors and 33 (44.59%) Paramedics found use of cigarette smoking as 'Relaxing'. Addiction was the main reason for difficulty in quitting cigarette smoking as reported by 33 (37.93%) Doctors and 31 (41.89%) Paramedics. Of the smokers, 61(70.11%) doctors and 50 (32.43%) paramedics had no intention to quit smoking in the next 6 months. Conclusion: A significant number of doctors and paramedics, especially males, in Pakistan smoke cigarettes, which requires proper attention. (author)

  1. Alternative end-joining catalyzes robust IgH locus deletions and translocations in the combined absence of ligase 4 and Ku70.

    Science.gov (United States)

    Boboila, Cristian; Jankovic, Mila; Yan, Catherine T; Wang, Jing H; Wesemann, Duane R; Zhang, Tingting; Fazeli, Alex; Feldman, Lauren; Nussenzweig, Andre; Nussenzweig, Michel; Alt, Frederick W

    2010-02-16

    Class switch recombination (CSR) in B lymphocytes is initiated by introduction of multiple DNA double-strand breaks (DSBs) into switch (S) regions that flank immunoglobulin heavy chain (IgH) constant region exons. CSR is completed by joining a DSB in the donor S mu to a DSB in a downstream acceptor S region (e.g., S gamma1) by end-joining. In normal cells, many CSR junctions are mediated by classical nonhomologous end-joining (C-NHEJ), which employs the Ku70/80 complex for DSB recognition and XRCC4/DNA ligase 4 for ligation. Alternative end-joining (A-EJ) mediates CSR, at reduced levels, in the absence of C-NHEJ, even in combined absence of Ku70 and ligase 4, demonstrating an A-EJ pathway totally distinct from C-NHEJ. Multiple DSBs are introduced into S mu during CSR, with some being rejoined or joined to each other to generate internal switch deletions (ISDs). In addition, S-region DSBs can be joined to other chromosomes to generate translocations, the level of which is increased by absence of a single C-NHEJ component (e.g., XRCC4). We asked whether ISD and S-region translocations occur in the complete absence of C-NHEJ (e.g., in Ku70/ligase 4 double-deficient B cells). We found, unexpectedly, that B-cell activation for CSR generates substantial ISD in both S mu and S gamma1 and that ISD in both is greatly increased by the absence of C-NHEJ. IgH chromosomal translocations to the c-myc oncogene also are augmented in the combined absence of Ku70 and ligase 4. We discuss the implications of these findings for A-EJ in normal and abnormal DSB repair.

  2. Sorting by Cuts, Joins, and Whole Chromosome Duplications.

    Science.gov (United States)

    Zeira, Ron; Shamir, Ron

    2017-02-01

    Genome rearrangement problems have been extensively studied due to their importance in biology. Most studied models assumed a single copy per gene. However, in reality, duplicated genes are common, most notably in cancer. In this study, we make a step toward handling duplicated genes by considering a model that allows the atomic operations of cut, join, and whole chromosome duplication. Given two linear genomes, [Formula: see text] with one copy per gene and [Formula: see text] with two copies per gene, we give a linear time algorithm for computing a shortest sequence of operations transforming [Formula: see text] into [Formula: see text] such that all intermediate genomes are linear. We also show that computing an optimal sequence with fewest duplications is NP-hard.

  3. Complete Status Report Documenting Development of Friction Stir Welding for Joining Thin Wall Tubing of ODS Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, David T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bunn, Jeffrey R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gussev, Maxim N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-08-01

    The development of friction stir welding (FSW) for joining thin sections of the advanced oxide dispersion strengthened (ODS) 14YWT ferritic alloy was initiated in Fuel Cycle Research and Development (FCRD), now the Nuclear Technology Research and Development (NTRD), in 2015. The first FSW experiment was conducted in late FY15 and successfully produced a bead-on-plate stir zone (SZ) on a 1 mm thick plate of 14YWT (SM13 heat). The goal of this research task is to ultimately demonstrate that FSW is a feasible method for joining thin wall (0.5 mm thick) tubing of 14YWT.

  4. Human DNA ligase III bridges two DNA ends to promote specific intermolecular DNA end joining

    Science.gov (United States)

    Kukshal, Vandna; Kim, In-Kwon; Hura, Gregory L.; Tomkinson, Alan E.; Tainer, John A.; Ellenberger, Tom

    2015-01-01

    Mammalian DNA ligase III (LigIII) functions in both nuclear and mitochondrial DNA metabolism. In the nucleus, LigIII has functional redundancy with DNA ligase I whereas LigIII is the only mitochondrial DNA ligase and is essential for the survival of cells dependent upon oxidative respiration. The unique LigIII zinc finger (ZnF) domain is not required for catalytic activity but senses DNA strand breaks and stimulates intermolecular ligation of two DNAs by an unknown mechanism. Consistent with this activity, LigIII acts in an alternative pathway of DNA double strand break repair that buttresses canonical non-homologous end joining (NHEJ) and is manifest in NHEJ-defective cancer cells, but how LigIII acts in joining intermolecular DNA ends versus nick ligation is unclear. To investigate how LigIII efficiently joins two DNAs, we developed a real-time, fluorescence-based assay of DNA bridging suitable for high-throughput screening. On a nicked duplex DNA substrate, the results reveal binding competition between the ZnF and the oligonucleotide/oligosaccharide-binding domain, one of three domains constituting the LigIII catalytic core. In contrast, these domains collaborate and are essential for formation of a DNA-bridging intermediate by adenylated LigIII that positions a pair of blunt-ended duplex DNAs for efficient and specific intermolecular ligation. PMID:26130724

  5. El primero de mayo en la ciudad de México en los tiempos de la revolución.

    Directory of Open Access Journals (Sweden)

    Anna Ribera Carb\\u00F3

    2006-01-01

    Full Text Available De entre las tradiciones inventadas por los trabajadores del mundo, la más exitosa es, sin duda, la del Primero de Mayo que sirvió para cohesionar a grupos obreros de distinta denominación ideológica y a crear entre ellos conciencia de clase como ninguna otra. En México la conmemoración empezó a realizarse de manera tardía. Fue en 1913 cuando se organizó en la ciudad de México la primera manifestación masiva a partir de la iniciativa de la Casa del Obrero Mundial fundada un año antes y vinculada al pensamiento anarcosindicalista. Fue justamente con esta manifestación que la clase obrera empezó a construir su propio espacio en la capital del país y convirtió a la Casa del Obrero Mundial en un elemento fundamental del entramado político de la Revolución Mexicana.

  6. Joining of Dissimilar alloy Sheets (Al 6063&AISI 304 during Resistance Spot Welding Process: A Feasibility Study for Automotive industry

    Directory of Open Access Journals (Sweden)

    Reddy Sreenivasulu

    2014-12-01

    Full Text Available Present design trends in automotive manufacture have shifted emphasis to alternative lightweight materials in order to achieve higher fuel efficiency and to bring down vehicle emission. Although some other joining techniques are more and more being used, spot welding still remains the primary joining method in automobile manufacturing so far. Spot welds for automotive applications should have a sufficiently large diameter, so that nugget pullout mode is the dominant failure mode. Interfacial mode is unacceptable due to its low load carrying and energy absorption capability. Strength tests with different static loading were performed in, to reveal the failure mechanisms for the lap-shear geometry and the cross-tension geometry. Based on the literature survey performed, venture into this work was amply motivated by the fact that a little research work has been conducted to joining of dissimilar materials like non ferrous to ferrous. Most of the research works concentrated on joining of different materials like steel to steel or aluminium alloy to aluminium alloy by resistance spot welding. In this work, an experimental study on the resistance spot weldability of aluminium alloy (Al 6063 and austenitic stainless steel (AISI304 sheets, which are lap joined by using a pedestal type resistance spot welding machine. Welding was conducted using a 45-deg truncated cone copper electrode with 10-mm face diameter. The weld nugget diameter, force estimation under lap shear test and T – peel test were investigated using digital type tensometer attached with capacitive displacement transducer (Mikrotech, Bangalore, Model: METM2000ER1. The results shows that joining of Al 6063 and AISI 304 thin sheets by RSW method are feasible for automotive structural joints where the loads are below 1000N act on them, it is observed that by increasing the spots per unit length, then the joint with standing strength to oppose failure is also increased linearly incase of

  7. Enumeration for spanning trees and forests of join graphs based on the combinatorial decomposition

    Directory of Open Access Journals (Sweden)

    Sung Sik U

    2016-10-01

    Full Text Available This paper discusses the enumeration for rooted spanning trees and forests of the labelled join graphs $K_m+H_n$ and $K_m+K_{n,p}$, where $H_n$ is a graph with $n$ isolated vertices. 

  8. Cut-and-join operators and N=4 super Yang-Mills

    International Nuclear Information System (INIS)

    Brown, T.W.

    2010-02-01

    We show which multi-trace structures are compatible with the symmetrisation of local operators in N=4 super Yang-Mills when they are organised into representations of the global symmetry group. Cut-and-join operators give the non-planar expansion of correlation functions of these operators in the free theory. Using these techniques we find the 1/N corrections to the quarter-BPS operators which remain protected at weak coupling. We also present a new way of counting these chiral ring operators using the Weyl group S N . (orig.)

  9. Cut-and-join operators and N=4 super Yang-Mills

    Energy Technology Data Exchange (ETDEWEB)

    Brown, T W [DESY, Hamburg (Germany). Theory Group

    2010-02-15

    We show which multi-trace structures are compatible with the symmetrisation of local operators in N=4 super Yang-Mills when they are organised into representations of the global symmetry group. Cut-and-join operators give the non-planar expansion of correlation functions of these operators in the free theory. Using these techniques we find the 1/N corrections to the quarter-BPS operators which remain protected at weak coupling. We also present a new way of counting these chiral ring operators using the Weyl group S{sub N}. (orig.)

  10. Double Strand Break Repair, one mechanism can hide another: Alternative non-homologous end joining

    International Nuclear Information System (INIS)

    Rass, E.; Grabarz, A.; Bertrand, P.; Lopez, B.S.

    2012-01-01

    DNA double strand breaks are major cytotoxic lesions encountered by the cells. They can be induced by ionizing radiation or endogenous stress and can lead to genetic instability. Two mechanisms compete for the repair of DNA double strand breaks: homologous recombination and non-homologous end joining (NHEJ). Homologous recombination requires DNA sequences homology and is initiated by single strand resection. Recently, advances have been made concerning the major steps and proteins involved in resection. NHEJ, in contrast, does not require sequence homology. The existence of a DNA double strand break repair mechanism, independent of KU and ligase IV, the key proteins of the canonical non homologous end joining pathway, has been revealed lately and named alternative non homologous end joining. The hallmarks of this highly mutagenic pathway are deletions at repair junctions and frequent use of distal micro-homologies. This mechanism is also initiated by a single strand resection of the break. The aim of this review is firstly to present recent data on single strand resection, and secondly the alternative NHEJ pathway, including a discussion on the fidelity of NHEJ. Based on current knowledge, canonical NHEJ does not appear as an intrinsically mutagenic mechanism, but in contrast, as a conservative one. The structure of broken DNA ends actually dictates the quality repair of the alternative NHEJ and seems the actual responsible for the mutagenesis attributed beforehand to the canonical NHEJ. The existence of this novel DNA double strand breaks repair mechanism needs to be taken into account in the development of radiosensitizing strategies in order to optimise the efficiency of radiotherapy. (authors)

  11. Exploring the uncertainties of early detection results: model-based interpretation of mayo lung project

    Directory of Open Access Journals (Sweden)

    Berman Barbara

    2011-03-01

    Full Text Available Abstract Background The Mayo Lung Project (MLP, a randomized controlled clinical trial of lung cancer screening conducted between 1971 and 1986 among male smokers aged 45 or above, demonstrated an increase in lung cancer survival since the time of diagnosis, but no reduction in lung cancer mortality. Whether this result necessarily indicates a lack of mortality benefit for screening remains controversial. A number of hypotheses have been proposed to explain the observed outcome, including over-diagnosis, screening sensitivity, and population heterogeneity (initial difference in lung cancer risks between the two trial arms. This study is intended to provide model-based testing for some of these important arguments. Method Using a micro-simulation model, the MISCAN-lung model, we explore the possible influence of screening sensitivity, systematic error, over-diagnosis and population heterogeneity. Results Calibrating screening sensitivity, systematic error, or over-diagnosis does not noticeably improve the fit of the model, whereas calibrating population heterogeneity helps the model predict lung cancer incidence better. Conclusions Our conclusion is that the hypothesized imperfection in screening sensitivity, systematic error, and over-diagnosis do not in themselves explain the observed trial results. Model fit improvement achieved by accounting for population heterogeneity suggests a higher risk of cancer incidence in the intervention group as compared with the control group.

  12. Lichen planus affecting the female genitalia: A retrospective review of patients at Mayo Clinic.

    Science.gov (United States)

    Fahy, Caoimhe M R; Torgerson, Rochelle R; Davis, Mark D P

    2017-12-01

    Genital or vulval lichen planus (VLP) may have a disabling effect on a patient's quality of life. Evidence-based management guidelines are lacking for VLP. We sought to review clinical presentation and treatment of patients who received a diagnosis of VLP. The 100 consecutive patients who received a diagnosis of VLP at Mayo Clinic between January 1, 1997, and December 31, 2015, were reviewed retrospectively. Descriptive statistics were used for data analysis. Fisher's exact test and the Wilcoxon rank sum test were used for analysis of categorical and continuous variables, respectively. All statistical tests were 2 sided, with the α level set at .05 for statistical significance. The time to diagnosis for 49% of patients was more than 1 year. Three patients (3%) had vulval dysplasia, including invasive squamous cell carcinoma. Sixty-eight patients (68%) had multisite lichen planus disease. Eleven patients (11%) had disease remission. Dermatology was the lead specialty for 9 of these cases of remission. This was a retrospective, small-cohort study. A low frequency of disease remission was seen in patients with VLP. Patients with lichen planus benefit considerably from dermatology consultation. Further research is warranted to establish high-quality, evidence-based guidelines for multidisciplinary management of this challenging disease. Copyright © 2017 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  13. Joining of yttria-tetragonal zirconia polycrystal with an aluminum-zirconium alloy

    International Nuclear Information System (INIS)

    Rathner, R.C.; Green, D.J.

    1990-01-01

    Specimens of yttria-tetragonal zirconia polycrystal (Y-TZP) have been joined with an Al-5.8 wt% Zr alloy at temperatures of 900 degrees C and above. The braze alloy contained large needlelike precipitates of the intermetallic phase Al 3 Sr. It is shown that these large precipitates can aid in strengthening of the joint, especially if they are close to the interface. With decreasing layer thickness, the strengths increased with values as high as 420 MPa

  14. Learning Opportunities (Editorial

    Directory of Open Access Journals (Sweden)

    Denise Koufogiannakis

    2009-12-01

    Full Text Available We’ve reached the end of another year of publication at EBLIP, my first at the helm as Editor‐in‐Chief, and four full years of publication since we began. This year was a busy one with several changes to the editorial team, the addition of more Editorial Advisors, and new evidence summary writers joining our team. Most importantly, the journal continues to grow and thrive, with more people than ever participating in its success. This year we added a new section called Using Evidence in Practice, and in this issue there are two articles in that section which provide practical examples of applying evidence in the workplace. Putting evidence into practice is what EBLIP is all about, so it is my hope that this new section makes the application of evidence based practice more concrete for readers. As we began working on issue 4.4, the Editorial Team decided that it would be a good idea to seek out an Editorial Intern to help with some of the tasks we never seem to get to, given that we are all volunteers. We see the internship as an opportunity to give a library and information studies student a chance to get involved with an open access journal and learn about publishing in library and information studies, which will hopefully benefit them as they begin their new career. The Editorial Intern will assist with marketing and promotion of the journal, soliciting potential manuscripts, and proofreading. They will also participate in all editorial meetings and general discussions. We anticipate that they will bring a wealth of enthusiasm and fresh ideas to our conversations so that EBLIP Editors can also continue to learn and grow by having a fresh set of eyes involved with our processes. It will certainly be a win‐win situation and a learning opportunity for all involved. We are pleased to announce that Andrea Baer has accepted the position of Editorial Intern and joined our team in mid‐November. Andrea is currently attending the University of

  15. Mohs micrographic surgery for the treatment of hidradenocarcinoma: the Mayo Clinic experience from 1993 to 2013.

    Science.gov (United States)

    Tolkachjov, Stanislav N; Hocker, Thomas L; Hochwalt, Phillip C; Camilleri, Michael J; Arpey, Christopher J; Brewer, Jerry D; Otley, Clark C; Roenigk, Randall K; Baum, Christian L

    2015-02-01

    Hidradenocarcinoma (HAC) is a rare malignant adnexal neoplasm with reported metastatic potential and undefined optimal treatment. To review clinical characteristics and outcomes of patients with HAC treated with Mohs micrographic surgery (MMS). The authors performed a retrospective chart review of patients with HAC treated by MMS at Mayo Clinic from 1993 to 2013, recording patient demographics, tumor characteristics, MMS stages to clearance, follow-up, recurrence, metastasis, and mortality. Ten patients underwent MMS for HAC more than 20 years. The average age was 62.8 years, with 6 females and 4 males. Occipital scalp was the most common location (40%), followed by extremities (30%) and face (20%). In 5 of 7 cases (71%), "cyst" was the working clinical diagnosis. The average preoperative lesion area was 3.18 cm, with an average of 1.5 MMS stages required for clearance. Mean postoperative follow-up was 7 years (range, 5-205 months). No tumors treated with MMS recurred, metastasized, or led to disease-related mortality. Mohs micrographic surgery seems to be a useful treatment modality for HAC. This is the largest reported series of HAC treated with MMS with long-term follow-up.

  16. Further psychometric evaluation and revision of the Mayo-Portland Adaptability Inventory in a national sample.

    Science.gov (United States)

    Malec, James F; Kragness, Miriam; Evans, Randall W; Finlay, Karen L; Kent, Ann; Lezak, Muriel D

    2003-01-01

    To evaluate the internal consistency of the Mayo-Portland Adaptability Inventory (MPAI), further refine the instrument, and provide reference data based on a large, geographically diverse sample of persons with acquired brain injury (ABI). 386 persons, most with moderate to severe ABI. Outpatient, community-based, and residential rehabilitation facilities for persons with ABI located in the United States: West, Midwest, and Southeast. Rasch, item cluster, principal components, and traditional psychometric analyses for internal consistency of MPAI data and subscales. With rescoring of rating scales for 4 items, a 29-item version of the MPAI showed satisfactory internal consistency by Rasch (Person Reliability=.88; Item Reliability=.99) and traditional psychometric indicators (Cronbach's alpha=.89). Three rationally derived subscales for Ability, Activity, and Participation demonstrated psychometric properties that were equivalent to subscales derived empirically through item cluster and factor analyses. For the 3 subscales, Person Reliability ranged from.78 to.79; Item Reliability, from.98 to.99; and Cronbach's alpha, from.76 to.83. Subscales correlated moderately (Pearson r =.49-.65) with each other and strongly with the overall scale (Pearson r=.82-.86). Outcome after ABI is represented by the unitary dimension described by the MPAI. MPAI subscales further define regions of this dimension that may be useful for evaluation of clinical cases and program evaluation.

  17. Mapping the Mayo-Portland adaptability inventory to the international classification of functioning, disability and health.

    Science.gov (United States)

    Lexell, Jan; Malec, James F; Jacobsson, Lars J

    2012-01-01

    To examine the contents of the Mayo-Portland Adaptability Inventory (MPAI-4) by mapping it to the International Classification of Functioning, Disability and Health (ICF). Each of the 30 scoreable items in the MPAI-4 was mapped to the most precise ICF categories. All 30 items could be mapped to components and categories in the ICF. A total of 88 meaningful concepts were identified. There were, on average, 2.9 meaningful concepts per item, and 65% of all concepts could be mapped. Items in the Ability and Adjustment subscales mapped to categories in both the Body Functions and Activity/Participation components of the ICF, whereas all except 1 in the Participation subscale were to categories in the Activity/Participation component. The items could also be mapped to 34 (13%) of the 258 Environmental Factors in the ICF. This mapping provides better definition through more concrete examples (as listed in the ICF) of the types of body functions, activities, and participation indicators that are represented by the 30 scoreable MPAI-4 items. This may assist users throughout the world in understanding the intent of each item, and support further development and the possibility to report results in the form of an ICF categorical profile, making it universally interpretable.

  18. The Mayo-Portland Participation Index: A brief and psychometrically sound measure of brain injury outcome.

    Science.gov (United States)

    Malec, James F

    2004-12-01

    To evaluate the internal consistency, interrater agreement, concurrent validity, and floor and ceiling effects of the 8-item Participation Index (M2PI) of the Mayo-Portland Adaptability Inventory (MPAI). M2PI data derived from MPAIs completed independently by the people with acquired brain injury undergoing evaluation, their significant others, and rehabilitation staff were submitted to Rasch Facets analysis to determine the internal consistency of each independent rater group and of composite measures that combined rater groups. Correlations with the full-scale MPAI were examined to assess concurrent validity, as was interrater agreement. Outpatient rehabilitation in academic physical medicine and rehabilitation department. People with acquired brain injury (N=134) consecutively seen for evaluation, significant others, and evaluating staff. Not applicable. The MPAI and M2PI. The M2PI showed satisfactory internal consistency, concurrent validity, interrater agreement, and minimal floor and ceiling effects, although evidence of rater bias was also apparent. Composite indices showed more desirable psychometric properties than ratings by individual rater groups. The M2PI, particularly in composite indices and with attention to rater biases, provides an outcome measure with satisfactory psychometric qualities and the potential to represent the varying perspectives of people with acquired brain injury, significant others, and rehabilitation staff.

  19. FMEA and FTA Analyses of the Adhesive Joining Process using Electrically Conductive Adhesives

    Directory of Open Access Journals (Sweden)

    E. Povolotskaya

    2012-01-01

    Full Text Available This paper introduces a formulation of appropriate risk estimation methods that can be used for improving of processes in the electronics area. Two risk assessment methods have been chosen with regard to the specifics of adhesive joining based on electrically conductive adhesives. The paper provides a combination of a failure mode and effect analysis (FMEA and fault tree analysis (FTA for optimizing of the joining process. Typical features and failures of the process are identified. Critical operations are found and actions for avoiding failures in these actions are proposed. A fault treehas been applied to the process in order to get more precise information about the steps and operations in the process, and the relations between these operations. The fault tree identifies potential failures of the process. Then the effects of the failures have been estimated by the failure mode and effect analysis method. All major differences between failure mode and effect analysis and fault tree analysis are defined and there is a discussion about how to use the two techniquescomplement each other and achieve more efficient results.

  20. Joining of AZ31 and AZ91 Mg alloys by friction stir welding

    Directory of Open Access Journals (Sweden)

    B. Ratna Sunil

    2015-12-01

    Full Text Available Two dissimilar magnesium (Mg alloy sheets, one with low aluminium (AZ31 and another with high aluminium (AZ91 content, were successfully joined by friction stir welding (FSW. The effect of process parameters on the formation of hot cracks was investigated. A sound metallurgical joint was obtained at optimized process parameters (1400 rpm with 25 mm/min feed which contained fine grains and distributed β (Mg17Al12 phase within the nugget zone. An increasing trend in the hardness measurements has also confirmed more amount of dissolution of aluminium within the nugget zone. A sharp interface between nugget zone and thermo mechanical affected zone (TMAZ was clearly noticed at the AZ31 Mg alloy side (advancing but not on the AZ91 Mg alloy side (retreating. From the results it can be concluded that FSW can be effectively used to join dissimilar metals, particularly difficult to process metals such as Mg alloys, and hot cracking can be completely eliminated by choosing appropriate process parameters to achieve sound joint.

  1. Joining aluminum to titanium alloy by friction stir lap welding with cutting pin

    International Nuclear Information System (INIS)

    Wei, Yanni; Li, Jinglong; Xiong, Jiangtao; Huang, Fu; Zhang, Fusheng; Raza, Syed Hamid

    2012-01-01

    Aluminum 1060 and titanium alloy Ti–6Al–4V plates were lap joined by friction stir welding. A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of the joining interface were observed by scanning electron microscopy. Joint strength was evaluated by a tensile shear test. During the welding process, the surface layer of the titanium plate was cut off by the pin, and intensively mixed with aluminum situated on the titanium plate. The microstructures analysis showed that a visible swirl-like mixed region existed at the interface. In this region, the Al metal, Ti metal and the mixed layer of them were all presented. The ultimate tensile shear strength of joint reached 100% of 1060Al that underwent thermal cycle provided by the shoulder. - Highlights: ► FSW with cutting pin was successfully employed to form Al/Ti lap joint. ► Swirl-like structures formed due to mechanical mixing were found at the interface. ► High-strength joints fractured at Al suffered thermal cycle were produced.

  2. Citizen science on a smartphone: Participants' motivations and learning.

    Science.gov (United States)

    Land-Zandstra, Anne M; Devilee, Jeroen L A; Snik, Frans; Buurmeijer, Franka; van den Broek, Jos M

    2016-01-01

    Citizen science provides researchers means to gather or analyse large datasets. At the same time, citizen science projects offer an opportunity for non-scientists to be part of and learn from the scientific process. In the Dutch iSPEX project, a large number of citizens turned their smartphones into actual measurement devices to measure aerosols. This study examined participants' motivation and perceived learning impacts of this unique project. Most respondents joined iSPEX because they wanted to contribute to the scientific goals of the project or because they were interested in the project topics (health and environmental impact of aerosols). In terms of learning impact, respondents reported a gain in knowledge about citizen science and the topics of the project. However, many respondents had an incomplete understanding of the science behind the project, possibly caused by the complexity of the measurements. © The Author(s) 2015.

  3. Revolutionary composite joining method; from an aerospace thesis research to founding a new company

    NARCIS (Netherlands)

    Bergman, A.

    2014-01-01

    In 2011, Peter Madlener started his graduation thesis at the Aerospace Engineering faculty on a new joining technology for composite sandwich panels. The promising results gained in this thesis led to the foundation of MOCS: a young company with the ambitious goal of introducing a revolutionary

  4. FeCrAl and Zr alloys joined using hot isostatic pressing for fusion energy applications

    International Nuclear Information System (INIS)

    Park, Dong Jun; Kim, Hyun Gil; Park, Jeong Yong; Jung, Yang Il; Park, Jung Hwan; Koo, Yang Hyun

    2016-01-01

    Highlights: • FeCrAl and Zr alloys were successfully joined by hot isostatic pressing (HIP). • The thickness of diffusion layer increased with an increase in HIP temperature. • Significant inter-diffusion was observed for HIP at 1150 °C. • Maximum joint strength was achieved at HIP temperature of 700 °C. - Abstract: FeCrAl and Zr alloys were joined by a hot isostatic pressing (HIP) method for fusion energy applications. The optimum conditions for the joining process were studied. The HIP temperatures were varied from 700 to 1050 °C. The mechanical properties of the HIPed samples were evaluated by four-point bending and tensile tests. The FeCrAl and Zr alloys HIPed at 700 °C showed higher joint strength than the other samples. The joint strength decreased with an increase in the HIP temperature from 700 to 950 °C and significantly dropped at 1050 °C. Transmission electron microscopy, scanning electron microscopy, and optical microscopy were used to characterize the joints and interface region of the HIPed samples. The joints appeared to be tightly bonded and no intermetallic compounds or gaps were observed at the interface for HIP temperatures up to 950 °C. A diffusion layer formed at the interface and its thickness increased with the HIP temperature. HIP at 1050 °C, on the other hand, resulted in significant inter-diffusion and formation of brittle inter-metallic compounds at the interface.

  5. THE RIGHT TO FORM AND TO JOIN TRADE UNIONS AS DEFINED IN INTERNATIONAL LEGAL INSTRUMENTS

    Directory of Open Access Journals (Sweden)

    Andon Majhoshev

    2017-07-01

    Full Text Available The right of workers to form and to join trade unions is one of the most important international labour standards. This means that employees, no matter where they are employed (public or private sector, have the right to form their own organizations (unions. Apart from the employees, employers also have the right to form and join in employers’ associations. The right of employees and employers to organize is based on the following principles: voluntariness, autonomy and democracy. The general objective of the formation of unions and employers’ associations is to protect the rights and interests of members of the union and the employers’ association, as well as their promotion in an organized manner. The provision and guarantee of union and workers' rights are guaranteed by a number of international and regional legal instruments (conventions, recommendations, regulations, such as ILO, UN, Council of Europe and the European Union, which will be analysed further in this paper. The main objective arising from these documents is to improve the position of workers and their protection. Within the paper, we will also analyse the most important legal acts of the Republic of Macedonia concerning the right to join unions. By analysing the content of the national labour legislation, we will determine the extent to which the international labour law is being implemented. Moreover, the paper will analyse the basic principles underlying union organization and association.

  6. Joining psychiatric care and faith healing in a prayer camp in Ghana: randomised trial.

    Science.gov (United States)

    Ofori-Atta, A; Attafuah, J; Jack, H; Baning, F; Rosenheck, R

    2018-01-01

    Care of people with serious mental illness in prayer camps in low-income countries generates human rights concerns and ethical challenges for outcome researchers. Aims To ethically evaluate joining traditional faith healing with psychiatric care including medications (Clinical trials.gov identifier NCT02593734). Residents of a Ghana prayer camp were randomly assigned to receive either indicated medication for schizophrenia or mood disorders along with usual prayer camp activities (prayers, chain restraints and fasting) (n = 71); or the prayer camp activities alone (n = 68). Masked psychologists assessed Brief Psychiatric Rating Scale (BPRS) outcomes at 2, 4 and 6 weeks. Researchers discouraged use of chaining, but chaining decisions remained under the control of prayer camp staff. Total BPRS symptoms were significantly lower in the experimental group (P = 0.003, effect size -0.48). There was no significant difference in days in chains. Joining psychiatric and prayer camp care brought symptom benefits but, in the short-run, did not significantly reduce days spent in chains. Declaration of interest None.

  7. Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model.

    Science.gov (United States)

    Singh, Ipsha; Nair, K Chandrasekharan; Shetty, Jayakar

    2017-01-01

    The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. University of California, Los Angeles, abutment was attached to the implant fixture. Eight strain gauges were attached to the acrylic resin model. Six similar models were made. Implant-supported screw-retained fixed prosthesis was fabricated in nickel-chromium alloy. A load of 400 N was applied on the prosthesis using universal testing machine. Resultant strain was measured in each strain gauge. All the prostheses were sectioned at the area between 36 and 33, 33 and 43, and 43 and 46 using 35 micrometer carborundum disc, and strain was measured in each strain gauge after applying a load of 400 N on the prosthesis. Specimens were joined by arc welding, soldering, and laser welding. After joining, a load of 400 N was applied on each prosthesis and the resultant strain was measured in each strain gauge. Highest mean strain values were recorded before sectioning of the prostheses (889.9 microstrains). Lowest mean strain values were recorded after sectioning the prosthesis and before reuniting it (225.0 microstrains). Sectioning and reuniting the long-span implant prosthesis was found to be a significant factor in influencing the peri-implant strain.

  8. The impact of research-based learning on student’s academic performance and motivation

    Science.gov (United States)

    Sumbawati, M. S.; Anistyasari, Y.

    2018-01-01

    Undergraduate students often have difficulty in finding the updated research topic for their undergraduate thesis. This is due to students have less knowledge about research in a particular field because they are less familiar with scientific articles. This work, therefore, proposed an implementation of research-based learning and measured students’ academic performance and motivation. The study is conducted in four stages which are the plan, do, check, and act. Research-based learning is conducted based on its syntax. Paper and pencil test is then performed to measure students’ academic achievement and a survey is devoted to determining students’ academic motivation. The results show that most students obtain satisfied score and they feel comfortable to join a class with research-based learning.

  9. Spotlight on RESA 6: Regional Implementation of the Learning School Initiative. Catalyst Schools Research Study Report

    Science.gov (United States)

    Hammer, Patricia Cahape

    2016-01-01

    West Virginia's Regional Education Service Agency 6 (RESA 6) serves five districts in the northern panhandle of the state--Brooke, Hancock, Marshall, Ohio, and Wetzel--which together are home to 51 schools. RESA 6 joined the pilot implementation of the Learning School approach in the summer of 2015, as part of the second cohort. RESA 6's group…

  10. Experimental study on joining of AA6063 and AISI 1040 steel

    Science.gov (United States)

    Hynes, N. Rajesh Jesudoss; Raja, S.

    2018-05-01

    Feasibility of joining of dissimilar metals with different physical, chemical and thermal properties such as AA6063 alloy and AISI 1040 steel is worthwhile study, since it has tremendous applications in all most of all engineering domains. The mechanism of bonding is studied using scanning electron microscopy. Impact strength of AA2024/AISI joints, axial shortening distance, micro hardness distribution and joint strength are determined. Micro hardness profile shows increased hardness value at the joint interface, due to grain refinement.

  11. Generic multiset programming with discrimination-based joins and symbolic Cartesian products

    DEFF Research Database (Denmark)

    Henglein, Fritz; Larsen, Ken Friis

    2010-01-01

    This paper presents GMP, a library for generic, SQL-style programming with multisets. It generalizes the querying core of SQL in a number of ways: Multisets may contain elements of arbitrary first-order data types, including references (pointers), recur- sive data types and nested multisets......: symbolic (term) repre- sentations of multisets, specifically for Cartesian products, for facilitating dynamic symbolic computation, which intersperses algebraic simplification steps with conventional data pro- cessing; and discrimination-based joins, a generic technique for computing equijoins based...

  12. CCI and CI Join Hands:A Better Supply Chain with More Innovations on Cotton Fabrics

    Institute of Scientific and Technical Information of China (English)

    Tom; Xue

    2010-01-01

    Cotton Council International("CCI")and Cotton Incorporated("CI") joined forces again,from October 19-22,2010 at Intertextile Shanghai,to promote natural fiber-U.S.cotton.As global textile strategic partners,both organizations were bringing together alliances through the cotton

  13. Deep imitation learning for 3D navigation tasks.

    Science.gov (United States)

    Hussein, Ahmed; Elyan, Eyad; Gaber, Mohamed Medhat; Jayne, Chrisina

    2018-01-01

    Deep learning techniques have shown success in learning from raw high-dimensional data in various applications. While deep reinforcement learning is recently gaining popularity as a method to train intelligent agents, utilizing deep learning in imitation learning has been scarcely explored. Imitation learning can be an efficient method to teach intelligent agents by providing a set of demonstrations to learn from. However, generalizing to situations that are not represented in the demonstrations can be challenging, especially in 3D environments. In this paper, we propose a deep imitation learning method to learn navigation tasks from demonstrations in a 3D environment. The supervised policy is refined using active learning in order to generalize to unseen situations. This approach is compared to two popular deep reinforcement learning techniques: deep-Q-networks and Asynchronous actor-critic (A3C). The proposed method as well as the reinforcement learning methods employ deep convolutional neural networks and learn directly from raw visual input. Methods for combining learning from demonstrations and experience are also investigated. This combination aims to join the generalization ability of learning by experience with the efficiency of learning by imitation. The proposed methods are evaluated on 4 navigation tasks in a 3D simulated environment. Navigation tasks are a typical problem that is relevant to many real applications. They pose the challenge of requiring demonstrations of long trajectories to reach the target and only providing delayed rewards (usually terminal) to the agent. The experiments show that the proposed method can successfully learn navigation tasks from raw visual input while learning from experience methods fail to learn an effective policy. Moreover, it is shown that active learning can significantly improve the performance of the initially learned policy using a small number of active samples.

  14. Use of a cobalt-based metallic glass for joining MoSi{sub 2} to stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Vaidya, R.U.; Rangaswamy, P.; Misra, A.; Gallegos, D.E.; Castro, R.G.; Petrovic, J.J. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.; Butt, D.P. [Florida Univ., Gainesville, FL (United States). Dept. of Materials Science and Engineering

    2002-07-01

    The successful use of a cobalt-based metallic glass in joining molybdenum disilicide (MoSi{sub 2}) to stainless steel 316L was demonstrated. Such joints are being investigated for sensor tube applications in glass melting operations. The cobalt-based metallic-glass (METGLAS{sup TM} 2714A) was found to wet the MoSi{sub 2} and stainless steel surfaces and provide high quality joints. Joining was completed at 1050 C for 60 minutes in two different ways; either by feeding excess braze into the braze gap upon heating or by constraining the MoSi{sub 2}/stainless steel assembly with an alumina (Al{sub 2}O{sub 3}) fixture during the heating cycle. These steps were necessary to ensure the production of a high quality void free joint. Post-brazing metallographic evaluations coupled with quantitative elemental analysis indicated the presence of a Co-Cr-Si ternary phase with CoSi and CoSi{sub 2} precipitates within the braze. The residual stresses in these molybdenum disilicide (MoSi{sub 2})/stainless steel 316 L joints were evaluated using X-ray diffraction and instrumented indentation techniques. These measurements revealed that significant differences are induced in the residual stresses in MoSi{sub 2} and stainless steel depending on the joining technique employed. Push-out tests were carried out on these joints to evaluate the joint strength. (orig.)

  15. The Effect of Temperature and Rotational Speed on Structure and Mechanical Properties of Cast Cu Base Alloy (Cu-Al-Si-Fe) Welded by Semisolid Stir Joining Method

    Science.gov (United States)

    Ferasat, Keyvan; Aashuri, Hossein; Kokabi, Amir Hossein; Shafizadeh, Mahdi; Nikzad, Siamak

    2015-12-01

    Semisolid stir joining has been under deliberation as a possible method for joining of copper alloys. In this study, the effect of temperature and rotational speed of stirrer on macrostructure evaluation and mechanical properties of samples were investigated. Optical microscopy and X-ray diffraction were performed for macro and microstructural analysis. A uniform micro-hardness profile was attained by semisolid stir joining method. The ultimate shear strength and bending strength of welded samples were improved in comparison with the cast sample. There is also lower area porosity in welded samples than the cast metal. The mechanical properties were improved by increasing temperature and rotational speed of the joining process.

  16. Mayo-Portland adaptability inventory: comparing psychometrics in cerebrovascular accident to traumatic brain injury.

    Science.gov (United States)

    Malec, James F; Kean, Jacob; Altman, Irwin M; Swick, Shannon

    2012-12-01

    (1) To evaluate the measurement reliability and construct validity of the Mayo-Portland Adaptability Inventory, 4th revision (MPAI-4) in a sample consisting exclusively of patients with cerebrovascular accident (CVA) using single parameter (Rasch) item-response methods; (2) to examine the differential item functioning (DIF) by sex within the CVA population; and (3) to examine DIF and differential test functioning (DTF) across traumatic brain injury (TBI) and CVA samples. Retrospective psychometric analysis of rating scale data. Home- and community-based brain injury rehabilitation program. Individuals post-CVA (n=861) and individuals with TBI (n=603). Not applicable. MPAI-4. Item data on admission to community-based rehabilitation were submitted to Rasch, DIF, and DTF analyses. The final calibration in the CVA sample revealed satisfactory reliability/separation for persons (.91/3.16) and items (1.00/23.64). DIF showed that items for pain, anger, audition, and memory were associated with higher levels of disability for CVA than TBI patients; whereas, self-care, mobility, and use of hands indicated greater overall disability for TBI patients. DTF analyses showed a high degree of association between the 2 sets of items (R=.92; R(2)=.85) and, at most, a 3.7 point difference in raw scores. The MPAI-4 demonstrates satisfactory psychometric properties for use with individuals with CVA applying for interdisciplinary posthospital rehabilitation. DIF reveals clinically meaningful differences between CVA and TBI groups that should be considered in results at the item and subscale level. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  17. Mycobacterium tuberculosis and Mycobacterium marinum non-homologous end-joining proteins can function together to join DNA ends in Escherichia coli.

    Science.gov (United States)

    Wright, Douglas G; Castore, Reneau; Shi, Runhua; Mallick, Amrita; Ennis, Don G; Harrison, Lynn

    2017-03-01

    Mycobacterium tuberculosis and Mycobacterium smegmatis express a Ku protein and a DNA ligase D and are able to repair DNA double strand breaks (DSBs) by non-homologous end-joining (NHEJ). This pathway protects against DNA damage when bacteria are in stationary phase. Mycobacterium marinum is a member of this mycobacterium family and like M. tuberculosis is pathogenic. M. marinum lives in water, forms biofilms and infects fish and frogs. M. marinum is a biosafety level 2 (BSL2) organism as it can infect humans, although infections are limited to the skin. M. marinum is accepted as a model to study mycobacterial pathogenesis, as M. marinum and M. tuberculosis are genetically closely related and have similar mechanisms of survival and persistence inside macrophage. The aim of this study was to determine whether M. marinum could be used as a model to understand M. tuberculosis NHEJ repair. We identified and cloned the M. marinum genes encoding NHEJ proteins and generated E. coli strains that express the M. marinum Ku (Mm-Ku) and ligase D (Mm-Lig) individually or together (LHmKumLig strain) from expression vectors integrated at phage attachment sites in the genome. We demonstrated that Mm-Ku and Mm-Lig are both required to re-circularize Cla I-linearized plasmid DNA in E. coli. We compared repair of strain LHmKumLig with that of an E. coli strain (BWKuLig#2) expressing the M. tuberculosis Ku (Mt-Ku) and ligase D (Mt-Lig), and found that LHmKumLig performed 3.5 times more repair and repair was more accurate than BWKuLig#2. By expressing the Mm-Ku with the Mt-Lig, or the Mt-Ku with the Mm-Lig in E. coli, we have shown that the NHEJ proteins from M. marinum and M. tuberculosis can function together to join DNA DSBs. NHEJ repair is therefore conserved between the two species. Consequently, M. marinum is a good model to study NHEJ repair during mycobacterial pathogenesis. © The Author 2016. Published by Oxford University Press on behalf of the UK Environmental Mutagen

  18. LDA merging and splitting with applications to multiagent cooperative learning and system alteration.

    Science.gov (United States)

    Pang, Shaoning; Ban, Tao; Kadobayashi, Youki; Kasabov, Nikola K

    2012-04-01

    To adapt linear discriminant analysis (LDA) to real-world applications, there is a pressing need to equip it with an incremental learning ability to integrate knowledge presented by one-pass data streams, a functionality to join multiple LDA models to make the knowledge sharing between independent learning agents more efficient, and a forgetting functionality to avoid reconstruction of the overall discriminant eigenspace caused by some irregular changes. To this end, we introduce two adaptive LDA learning methods: LDA merging and LDA splitting. These provide the benefits of ability of online learning with one-pass data streams, retained class separability identical to the batch learning method, high efficiency for knowledge sharing due to condensed knowledge representation by the eigenspace model, and more preferable time and storage costs than traditional approaches under common application conditions. These properties are validated by experiments on a benchmark face image data set. By a case study on the application of the proposed method to multiagent cooperative learning and system alternation of a face recognition system, we further clarified the adaptability of the proposed methods to complex dynamic learning tasks.

  19. Optimization of Laser Transmission Joining Process Parameters on Joint Strength of PET and 316 L Stainless Steel Joint Using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Shashi Prakash Dwivedi

    2014-01-01

    Full Text Available The objective of the present work is to study the effects of laser power, joining speed, and stand-off distance on the joint strength of PET and 316 L stainless steel joint. The process parameters were optimized using response methodology for achieving good joint strength. The central composite design (CCD has been utilized to plan the experiments and response surface methodology (RSM is employed to develop mathematical model between laser transmission joining parameters and desired response (joint strength. From the ANOVA (analysis of variance, it was concluded that laser power is contributing more and it is followed by joining speed and stand-off distance. In the range of process parameters, the result shows that laser power increases and joint strength increases. Whereas joining speed increases, joint strength increases. The joint strength increases with the increase of the stand-off distance until it reaches the center value; the joint strength then starts to decrease with the increase of stand-off distance beyond the center limit. Optimum values of laser power, joining speed, and stand-off distance were found to be 18 watt, 100 mm/min, and 2 mm to get the maximum joint strength (predicted: 88.48 MPa. There was approximately 3.37% error in the experimental and modeled results of joint strength.

  20. The Master's in Teaching and Learning: Expanding Utilitarianism in the Continuing Professional Development of Teachers in England

    Science.gov (United States)

    Frankham, Jo; Hiett, Sandra

    2011-01-01

    The article focuses on the policy rhetoric of the Masters in Teaching and Learning (MTL). This is a new degree being launched in the summer of 2010 aimed, initially, at teachers who have just joined the profession. The degree presages the aspiration for a Master's level teaching profession in England. Professional development as conceived in the…

  1. Using Facebook as an informal learning environment.

    Science.gov (United States)

    Cain, Jeff; Policastri, Anne

    2011-12-15

    To create, implement, and assess the effectiveness of an optional Facebook activity intended to expose students to contemporary business issues not covered in the core content of a pharmacy management and leadership course and to perspectives of experts and thought leaders external to their university. An informal learning strategy was used to create a Facebook group page and guest experts were identified and invited to submit posts pertaining to business-related topics. Students were given instructions for joining the Facebook group but informed that participation was optional. A mixed-methods approach using a student questionnaire, results on examination questions, and a student focus group was used to assess this activity. The informal design with no posting guidelines and no participation requirement was well received by students, who appreciated the unique learning environment and exposure to external experts. Facebook provides an informal learning environment for presenting contemporary topics and the thoughts of guest experts not affiliated with a college or school, thereby exposing students to relevant "real world" issues.

  2. Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model

    Directory of Open Access Journals (Sweden)

    Ipsha Singh

    2017-01-01

    Full Text Available Aim: The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. Materials and Methods: A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. University of California, Los Angeles, abutment was attached to the implant fixture. Eight strain gauges were attached to the acrylic resin model. Six similar models were made. Implant-supported screw-retained fixed prosthesis was fabricated in nickel-chromium alloy. A load of 400 N was applied on the prosthesis using universal testing machine. Resultant strain was measured in each strain gauge. All the prostheses were sectioned at the area between 36 and 33, 33 and 43, and 43 and 46 using 35 micrometer carborundum disc, and strain was measured in each strain gauge after applying a load of 400 N on the prosthesis. Specimens were joined by arc welding, soldering, and laser welding. After joining, a load of 400 N was applied on each prosthesis and the resultant strain was measured in each strain gauge. Results: Highest mean strain values were recorded before sectioning of the prostheses (889.9 microstrains. Lowest mean strain values were recorded after sectioning the prosthesis and before reuniting it (225.0 microstrains. Conclusions: Sectioning and reuniting the long-span implant prosthesis was found to be a significant factor in influencing the peri-implant strain.

  3. Brief Report: Cancer Immunotherapy in Patients With Preexisting Rheumatic Disease: The Mayo Clinic Experience.

    Science.gov (United States)

    Richter, Michael D; Pinkston, Olga; Kottschade, Lisa A; Finnes, Heidi D; Markovic, Svetomir N; Thanarajasingam, Uma

    2018-03-01

    To determine the risk of rheumatic disease flare and adverse effects in patients with preexisting rheumatic disease who were receiving immune checkpoint inhibitor (ICI) therapy. A retrospective medical record review was performed to identify all patients who received ICI therapy at Mayo Clinic in Rochester, Minnesota between 2011 and 2016 (~700 patients). Those with a preexisting rheumatic disease were identified using specific diagnostic codes. Sixteen patients were identified (81% female, median age 68.5 years). The most common rheumatic diseases were rheumatoid arthritis (n = 5), polymyalgia rheumatica (n = 5), Sjögren's syndrome (n = 2), and systemic lupus erythematosus (n = 2). Seven patients were receiving immunosuppressive therapy or glucocorticoids for their rheumatic disease at the time of initiation of the ICI. The primary malignancies were melanoma (n = 10), pulmonary (n = 4), or hematologic (n = 2). In most cases, ICIs were offered only after failure of several other therapies. Immune-related adverse effects (IRAEs) occurred in 6 patients, and all were treated successfully with glucocorticoids and discontinuation of the ICI therapy. There were no significant differences in time from cancer diagnosis to immunotherapy, duration of immunotherapy, age, or sex between the patients with and those without IRAEs. To our knowledge, this represents the largest single-center cohort of patients with rheumatic diseases who were exposed to modern cancer immunotherapy. Only a minority of these patients experienced a flare of their preexisting rheumatic disease or any other IRAE. © 2017, American College of Rheumatology.

  4. Fresno State joins CERN-related program to explore cutting edge physics

    CERN Multimedia

    2008-01-01

    California State University, Fresno has joined a collaboration of top physicists to work with what scientists believe will be the driving force behind high-energy physics for the foreseeable future. The program is the ATLAS (an acronym for A Toroidal LHC ApparatuS) experiment, which makes use of the Large Hadron Collider under construction at the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. Fresno State says it is the only one of the 23 California State University system schools participating in the LHC program and CERN.

  5. Joining the conversation: newspaper journalists' views on working with researchers.

    Science.gov (United States)

    Waddell, Charlotte; Lomas, Jonathan; Lavis, John N; Abelson, Julia; Shepherd, Cody A; Bird-Gayson, Twylla

    2005-09-01

    For health researchers who seek more research use in policy making to improve health and healthcare, working with the news media may represent an opportunity, given the media's pivotal role in public policy agenda-setting. Much literature on science and health journalism assumes a normative stance, focusing on improving the accuracy of news coverage. In this study, we investigated journalists' perspectives and experiences. We were particularly interested in learning how health researchers could work constructively with journalists as a means to increase research use in policy making. Qualitative methods were used to conduct and analyze interviews with experienced newspaper journalists across Canada, with children's mental health as a content example. In response, study participants emphasized journalistic processes more than the content of news coverage, whether children's mental health or other topics. Instead, they focused on what they thought researchers needed to know about journalists' roles, practices and views on working with researchers. Newspaper journalists balance business and social responsibilities according to their respective roles as editors, columnists and reporters. In practice, journalists must ensure newsworthiness, relevance to readers and access to sources in a context of daily deadlines. As generalists, journalists rely on researchers to be expert interpreters, although they find many researchers unavailable or unable to communicate with public audiences. While journalists are skeptical about such common organizational communications tools as news releases, they welcome the uncommon contributions of those researchers who cultivate relationships and invest time to synthesize and communicate research evidence on an ongoing basis. Some appealed for more researchers to join them in participating in public conversations. We conclude that there are opportunities for policy-oriented health researchers to work constructively with newspaper

  6. Enabling lightweight designs by a new laser based approach for joining aluminum to steel

    Science.gov (United States)

    Brockmann, Rüdiger; Kaufmann, Sebastian; Kirchhoff, Marc; Candel-Ruiz, Antonio; Müllerschön, Oliver; Havrilla, David

    2015-03-01

    As sustainability is an essential requirement, lightweight design becomes more and more important, especially for mobility. Reduced weight ensures more efficient vehicles and enables better environmental impact. Besides the design, new materials and material combinations are one major trend to achieve the required weight savings. The use of Carbon Fiber Reinforced Plastics (abbr. CFRP) is widely discussed, but so far high volume applications are rarely to be found. This is mainly due to the fact that parts made of CFRP are much more expensive than conventional parts. Furthermore, the proper technologies for high volume production are not yet ready. Another material with a large potential for lightweight design is aluminum. In comparison to CFRP, aluminum alloys are generally more affordable. As aluminum is a metallic material, production technologies for high volume standard cutting or joining applications are already developed. In addition, bending and deep-drawing can be applied. In automotive engineering, hybrid structures such as combining high-strength steels with lightweight aluminum alloys retain significant weight reduction but also have an advantage over monolithic aluminum - enhanced behavior in case of crash. Therefore, since the use of steel for applications requiring high mechanical properties is unavoidable, methods for joining aluminum with steel parts have to be further developed. Former studies showed that the use of a laser beam can be a possibility to join aluminum to steel parts. In this sense, the laser welding process represents a major challenge, since both materials have different thermal expansion coefficients and properties related to the behavior in corrosive media. Additionally, brittle intermetallic phases are formed during welding. A promising approach to welding aluminum to steel is based on the use of Laser Metal Deposition (abbr. LMD) with deposit materials in the form of powders. Within the present work, the advantages of this

  7. Manufacturing and joining technologies for helium cooled divertors

    International Nuclear Information System (INIS)

    Aktaa, J.; Basuki, W.W.; Weber, T.; Norajitra, P.; Krauss, W.; Konys, J.

    2014-01-01

    Highlights: • The manufacturing and joining technologies developed at KIT for helium cooled divertors are reviewed and critically discussed. • Various technologies have been pursued and further developed aiming divertor components with very high quality and sufficient reliability. • Very promising routes have been found for which however still R and D works are necessary. • Technologies developed are also useful for other divertor and even blanket concepts, particularly those with tungsten armor. - Abstract: In the helium cooled (HC) divertor, developed at KIT for a fusion power plant, tungsten has been selected as armor as well as structural material due to its crucial properties: high melting point, very low sputtering yield, good thermal conductivity, high temperature strength, low thermal expansion and low activation. Thereby the armor tungsten is attached to the structural tungsten by thermally conductive joint. Due to the brittleness of tungsten at low temperatures its use as structural material is limited to the high temperature part of the component and a structural joint to the reduced activation ferritic martensitic steel EUROFER97 is foreseen. Hence, to realize the selected hybrid material concept reliable tungsten–steel and tungsten–tungsten joints have been developed and will be reported in this paper. In addition, the modular design of the HC divertor requires tungsten armor tiles and tungsten structural thimbles to be manufactured in high numbers with very high quality. Due to the high strength and low temperature brittleness of tungsten special manufacturing techniques need to be developed for the production of parts with no cavities inside and/or surface flaws. The main achievement in developing the respective manufacturing technologies will be presented and discussed. To achieve the objectives mentioned above various manufacturing and joining technologies are pursued. Their later applicability depends on the level of development

  8. Refractory metal joining for first wall applications

    International Nuclear Information System (INIS)

    Cadden, C.H.; Odegard, B.C.

    2000-01-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking

  9. Refractory metal joining for first wall applications

    Energy Technology Data Exchange (ETDEWEB)

    Cadden, C.H. E-mail: chcadde@sandia.gov; Odegard, B.C

    2000-12-01

    The potential use of high temperature coolant (e.g. 900 deg. C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000 deg. C to 1275 deg. C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  10. Refractory metal joining for first wall applications

    Science.gov (United States)

    Cadden, C. H.; Odegard, B. C.

    2000-12-01

    The potential use of high temperature coolant (e.g. 900°C He) in first wall structures would preclude the applicability of copper alloy heat sink materials and refractory metals would be potential replacements. Brazing trials were conducted in order to examine techniques to join tungsten armor to high tungsten (90-95 wt%) or molybdenum TZM heat sink materials. Palladium-, nickel- and zirconium-based filler metals were investigated using brazing temperatures ranging from 1000°C to 1275°C. Palladium-nickel and palladium-cobalt braze alloys were successful in producing generally sound metallurgical joints in tungsten alloy/tungsten couples, although there was an observed tendency for the pure tungsten armor material to exhibit grain boundary cracking after bonding. The zirconium- and nickel-based filler metals produced defect-containing joints, specifically cracking and porosity, respectively. The palladium-nickel braze alloy produced sound joints in the Mo TZM/tungsten couple. Substitution of a lanthanum oxide-containing, fine-grained tungsten material (for the pure tungsten) eliminated the observed tungsten grain boundary cracking.

  11. CERN clubs join the fiftieth anniversary party!

    CERN Document Server

    2004-01-01

    CERN's clubs are planning to celebrate the Organization's 50th anniversary by organising a variety of special events. It's raining projects! CERN's clubs have chosen to celebrate the Organization's Golden Jubilee, each in its own style, by organising a whole host of anniversary events. While the Cine-Club continues to screen films made in the Member States on Thursday evenings, other clubs are organising special races and tournaments to honour CERN's 50th year. The CERN Rugby Club led the way in early April when it hosted a children's tournament which brought the Laboratory firmly into the view of its many young participants. On 24 April, the Cycling Club moves to centre stage as it takes its members on a unique 50-km discovery trip around the countryside above the tunnel of the future LHC. The Croquet Club, the Running Club, the Horse Riding Club and the Golf Club will all be joining the party in May and June. After that, football, softball, cycling, pétanque and sailing are just some of the items on a sp...

  12. Massively Parallel Sort-Merge Joins in Main Memory Multi-Core Database Systems

    OpenAIRE

    Martina-Cezara Albutiu, Alfons Kemper, Thomas Neumann

    2012-01-01

    Two emerging hardware trends will dominate the database system technology in the near future: increasing main memory capacities of several TB per server and massively parallel multi-core processing. Many algorithmic and control techniques in current database technology were devised for disk-based systems where I/O dominated the performance. In this work we take a new look at the well-known sort-merge join which, so far, has not been in the focus of research ...

  13. Elemental composition of Usnea sp lichen from Potter Peninsula, 25 de Mayo (King George) Island, Antarctica

    International Nuclear Information System (INIS)

    Bubach, Débora; Catán, Soledad Perez; Di Fonzo, Carla; Dopchiz, Laura

    2016-01-01

    Several pollutants, which include metals, are present in the Antarctic atmosphere, snow, marine and terrestrial organisms. This work reports the elements incorporated by Usnea sp thalli in Potter Peninsula, 25 de Mayo (King George) Island, South Shetlands, Antarctica. Geological origin was analyzed as possible sources of elements. For this purpose, correlations were done using a geochemical tracer, principal component analysis and enrichment factors were computed. Lithophile elements from particulate matter were present in most of the sampling sites. Bromine, Se and Hg showed the highest enrichment factors suggesting other sources than the particulate matter. Mercury values found in Usnea sp were in the same range as those reported for Deception Island (South Shetlands) and remote areas from the Patagonia Andes. - Highlights: • Hg enrichment factor was higher in ASPA than in human settlements area. • The elemental composition in Usnea sp from Antarctica reflected the human influence. • Bromine, Ca, Sr, Se, Fe, Hg and K contents indicated origins natural and anthropic. • The data will be considered as baselines for Potter Peninsula, King George Island. - This study provides recent element contents in Usnea sp from Potter Peninsula, South Shetland Islands, Antarctica. Some of them are the first concentration reported by Argentina.

  14. Modelling the Asymmetric Volatility in Hog Prices in Taiwan : The Impact of Joining the WTO

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); B-W. Huang (Bing-Wen); M-G. Chen (Meng-Gu)

    2010-01-01

    textabstractPrices in the hog industry in Taiwan are determined according to an auction system. There are significant differences in hog prices before, during and after joining the World Trade Organization (WTO). The paper models growth rates and volatility in daily hog prices in Taiwan from 23

  15. Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

    KAUST Repository

    Amer, Abdelhalim; Maruyama, Naoya; Pericà s, Miquel; Taura, Kenjiro; Yokota, Rio; Matsuoka, Satoshi

    2013-01-01

    Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution

  16. The endless tale of non-homologous end-joining.

    Science.gov (United States)

    Weterings, Eric; Chen, David J

    2008-01-01

    DNA double-strand breaks (DSBs) are introduced in cells by ionizing radiation and reactive oxygen species. In addition, they are commonly generated during V(D)J recombination, an essential aspect of the developing immune system. Failure to effectively repair these DSBs can result in chromosome breakage, cell death, onset of cancer, and defects in the immune system of higher vertebrates. Fortunately, all mammalian cells possess two enzymatic pathways that mediate the repair of DSBs: homologous recombination and non-homologous end-joining (NHEJ). The NHEJ process utilizes enzymes that capture both ends of the broken DNA molecule, bring them together in a synaptic DNA-protein complex, and finally repair the DNA break. In this review, all the known enzymes that play a role in the NHEJ process are discussed and a working model for the co-operation of these enzymes during DSB repair is presented.

  17. Memorias sociales y familiares de la dictadura cívico-militar: narrativas biográficas de integrantes de la asociación Abuelas de Plaza de Mayo

    Directory of Open Access Journals (Sweden)

    Miriam Elizabeth Kriger

    2017-06-01

    Puede volverse una memoria fuerte o débil según la coyuntura y el papel que le otorguen el Estado y la sociedad. Se presentan aquí narrativas biográficas de tres miembros de la asociación Abuelas de Plaza de Mayo, surgidas de entrevistas presenciales semiestructuradas y en profundidad realizadas ad hoc, en las cuales se ponen en juego estas memorias en diferentes registros. Se muestran fragmentos selectos para establecer las modalidades de reconocimiento de sus hijos desaparecidos y las tensiones entre su identidad juvenil y su condición militante.

  18. A professional learning community model: a case study of primary teachers community in west Bandung

    Science.gov (United States)

    Sari, A.; Suryadi, D.; Syaodih, E.

    2018-05-01

    The purpose of this study is to provide an alternative model of professional learning community for primary school teachers in improving the knowledge and professional skills. This study is a qualitative research with case study method with data collection is an interview, observation and document and triangulation technique for validation data that focuses on thirteen people 5th grade elementary school teacher. The results showed that by joining a professional learning community, teachers can share both experience and knowledge to other colleagues so that they can be able to continue to improve and enhance the quality of their learning. This happens because of the reflection done together before, during and after the learning activities. It was also revealed that by learning in a professional learning community, teachers can learn in their own way, according to need, and can collaborate with their colleagues in improving the effectiveness of learning. Based on the implementation of professional learning community primary school teachers can be concluded that teachers can develop the curriculum, the students understand the development, overcome learning difficulties faced by students and can make learning design more effective and efficient.

  19. Joining of hybrid AA6063-6SiCp-3Grp composite and AISI 1030 steel by friction welding

    Directory of Open Access Journals (Sweden)

    N. Rajesh Jesudoss Hynes

    2017-10-01

    Full Text Available Joining of metals and aluminium hybrid metal matrix composites has significant applications in aviation, ship building and automotive industries. In the present work, investigation is carried out on Friction Welding of AISI 1030 steel and hybrid AA6063-6SiCp-3Grpcomposite, that are difficult to weld by fusion welding technique. Silicon carbide and graphite particle reinforced AA6063 matrix hybrid composite was developed successfully using stir casting method and the joining feasibility of AISI1030 steel with AA6063-6SiCp-3Grp hybrid composite was tried out by friction stud welding technique. During friction stage of welding process, the particulates (SiC & Graphite used for reinforcement, tend to increase the viscosity and lead to improper mixing of matrix and reinforcement. This eventually results in lower strength in dissimilar joints. To overcome this difficulty AA1100 interlayer is used while joining hybrid composite to AISI 1030 steel. Experimentation was carried out using Taguchi based design of experiments (DOE technique. Multiple regression methods were applied to understand the relationship between process parameters of the friction stud welding process. Micro structural examination reveals three separate zones namely fully plasticized zone, partially deformed zone and unaffected base material zone. Ultra fine dynamically recrystallized grains of about 341 nm were observed at the fully plasticized zone. EDX analysis confirms the presence of intermetallic compound Fe2Al5 at the joint interface. According to the experimental analysis using DOE, rotational speed and interlayer sheet thickness contribute about 39% and 36% respectively in determining the impact strength of the welded joints. It is found that joining with 0.5 mm interlayer sheet provides efficient joints. Developed regression model could be used to predict the axial shortening distance and impact strength of the welded joint with reasonable accuracy.

  20. Joining the UN global compact in Spain: an institutional approach

    Directory of Open Access Journals (Sweden)

    Ainhoa Garayar Erro

    2012-12-01

    Full Text Available The aim of this study is to analyse the incentives for Spanish organisations that have adopted a voluntary code of conduct such as the United Nations Global Compact – GC. In the light of the sociological approach of neoinstitutional theory, we sought to determine the main isomorphic processes that result from joining the GC and factors of the institutional field that might undermine the legitimacy of organisations participating in this voluntary initiative.On the one hand, the main results, while not conclusive, showed that Spanish participants in the GC have more than one reason for joining the initiative. The study’s findings suggest that both institutional processes of mimetic isomorphism and normative isomorphism explain participation in the GC, which emphasizes the improvement in employee satisfaction, an improvement in customer satisfaction and also the fact of being part of sustainable development efforts.On the other hand, it can be asserted that the respondent organisations do not perceive major threats from the institutional environment that might undermine the legitimacy gained by joining the GC. Nonetheless, the Spanish organisations participating in the GC highlight the fact that the main institutional factor that might undermine the organization’s legitimacy is weak governance and corruption.RESUMENEl presente trabajo examina la incidencia que la adopción del Pacto Mundial de Naciones Unidas –PM– ha tenido en organizaciones españolas. En concreto, el objetivo es aportar evidencia sobre las motivaciones que impulsan a un grupo de entidades a participar en esta iniciativa voluntaria. Basándonos en el enfoque sociológico de la teoría neoinstitucional, analizamos los principales procesos de isomorfismo resultantes del proceso de adhesión, así como aquellos factores del entorno institucional que pueden llegar a mermar su legitimidad.Los resultados, aunque no concluyentes, muestran que las organizaciones espa

  1. An online app platform enhances collaborative medical student group learning and classroom management.

    Science.gov (United States)

    Peacock, Justin G; Grande, Joseph P

    2016-01-01

    The authors presented their results in effectively using a free and widely-accessible online app platform to manage and teach a first-year pathology course at Mayo Medical School. The authors utilized the Google "Blogger", "Forms", "Flubaroo", "Sheets", "Docs", and "Slides" apps to effectively build a collaborative classroom teaching and management system. Students were surveyed on the use of the app platform in the classroom, and 44 (94%) students responded. Thirty-two (73%) of the students reported that "Blogger" was an effective place for online discussion of pathology topics and questions. 43 (98%) of the students reported that the "Forms/Flubaroo" grade-reporting system was helpful. 40 (91%) of the students used the remote, collaborative features of "Slides" to create team-based learning presentations, and 39 (89%) of the students found those collaborative features helpful. "Docs" helped teaching assistants to collaboratively create study guides or grading rubrics. Overall, 41 (93%) of the students found that the app platform was helpful in establishing a collaborative, online classroom environment. The online app platform allowed faculty to build an efficient and effective classroom teaching and management system. The ease of accessibility and opportunity for collaboration allowed for collaborative learning, grading, and teaching.

  2. Massively Parallel Sort-Merge Joins in Main Memory Multi-Core Database Systems

    OpenAIRE

    Albutiu, Martina-Cezara; Kemper, Alfons; Neumann, Thomas

    2012-01-01

    Two emerging hardware trends will dominate the database system technology in the near future: increasing main memory capacities of several TB per server and massively parallel multi-core processing. Many algorithmic and control techniques in current database technology were devised for disk-based systems where I/O dominated the performance. In this work we take a new look at the well-known sort-merge join which, so far, has not been in the focus of research in scalable massively parallel mult...

  3. Perceptions of house officers working in hospitals of Lahore about joining the field of anaesthesiology as a career.

    Science.gov (United States)

    Anjum, Sohail; Mahboob, Usman

    2016-10-01

    To determine the perceptions of house officers working in hospitals about joining anaesthesiology as a career. This quantitative, descriptive questionnaire-based study was carried out from September 2014 to February 2015 in 26 teaching hospitals of Lahore, Pakistan, and comprised house officers. Those with at least three months of working experience in anaesthesiology were included. They were approached in their respective departments and a validated self-reporting questionnaire was delivered to them and received back by hand. SPSS 16 was used for data analysis. Of the 73 house officers approached, 53(72.6%) responded; 35(66%) men and 18(33%) women. Overall, 25(47.16%) respondents refused to join anaesthesiology as a career and 27(50.94%) included it in their first three career choices. Moreover, 25(47.16%) cited minimal interaction with patient as a reason for not taking anaesthesia as a career choice; 29(56.6%) of the respondents believed an anaesthetist had no or little role in surgery. Change in attitude about anaesthesiology as a specialty after having an anaesthesia rotation was mentioned by 26(49.05%) respondents. House officers had reservations about joining anaesthesiology as a career. The findings are suggestive of a positive effect of anaesthesiology house job on house officers attitude about the specialty.

  4. MS SQL Server 7.0 as a Platform for a Star Join Schema Data Warehouse

    DEFF Research Database (Denmark)

    Sørensen, Jens Otto; Alnor, Karl

    1998-01-01

    In this paper we construct a Star Join Schema and show how this schema can be created using the basic tools delivered with SQL Server 7.0. Major objectives are to keep the operational database unchanged so that data loading can be done without disturbing the business logic of the operational...

  5. Researchers and teachers learning together and from each other using video-based multimodal analysis

    DEFF Research Database (Denmark)

    Davidsen, Jacob; Vanderlinde, Ruben

    2014-01-01

    integrated touch-screens into their teaching and learning. This paper examines the methodological usefulness of video-based multimodal analysis. Through reflection on the research project, we discuss how, by using video-based multimodal analysis, researchers and teachers can study children’s touch......This paper discusses a year-long technology integration project, during which teachers and researchers joined forces to explore children’s collaborative activities through the use of touch-screens. In the research project, discussed in this paper, 16 touch-screens were integrated into teaching...... and learning activities in two separate classrooms; the learning and collaborative processes were captured by using video, collecting over 150 hours of footage. By using digital research technologies and a longitudinal design, the authors of the research project studied how teachers and children gradually...

  6. GP and pharmacist inter-professional learning - a grounded theory study.

    Science.gov (United States)

    Cunningham, David E; Ferguson, Julie; Wakeling, Judy; Zlotos, Leon; Power, Ailsa

    2016-05-01

    Practice Based Small Group Learning (PBSGL) is an established learning resource for primary care clinicians in Scotland and is used by one-third of general practitioners (GPs). Scottish Government and UK professional bodies have called for GPs and pharmacists to work more closely together to improve care. To gain GPs' and pharmacists' perceptions and experiences of learning together in an inter-professional PBSGL pilot. Qualitative research methods involving established GP PBSGL groups in NHS Scotland recruiting one or two pharmacists to join them. A grounded theory method was used. GPs were interviewed in focus groups by a fellow GP, and pharmacists were interviewed individually by two researchers, neither being a GP or a pharmacist. Interviews were audio-recorded, transcribed and analysed using grounded theory methods. Data saturation was achieved and confirmed. Three themes were identified: GPs' and pharmacists' perceptions and experiences of inter-professional learning; Inter-professional relationships and team-working; Group identity and purpose of existing GP groups. Pharmacists were welcomed into GP groups and both professions valued inter-professional PBSGL learning. Participants learned from each other and both professions gained a wider perspective of the NHS and of each others' roles in the organisation. Inter-professional relationships, communication and team-working were strengthened and professionals regarded each other as peers and friends.

  7. Joining Forces: The Chemical Biology-Medicinal Chemistry Continuum.

    Science.gov (United States)

    Plowright, Alleyn T; Ottmann, Christian; Arkin, Michelle; Auberson, Yves P; Timmerman, Henk; Waldmann, Herbert

    2017-09-21

    The scientific advances being made across all disciplines are creating ever-increasing opportunities to enhance our knowledge of biological systems and how they relate to human disease. One of the central driving forces in discovering new medicines is medicinal chemistry, where the design and synthesis of novel compounds has led to multiple drugs. Chemical biology, sitting at the interface of many disciplines, has now emerged as a major contributor to the understanding of biological systems and is becoming an integral part of drug discovery. Bringing chemistry and biology much closer and blurring the boundaries between disciplines is creating new opportunities to probe and understand biology; both disciplines play key roles and need to join forces and work together effectively to synergize their impact. The power of chemical biology will then reach its full potential and drive innovation, leading to the discovery of transformative medicines to treat patients. Advances in cancer biology and drug discovery highlight this potential. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Key technology for (V)HTR: laser beam joining of SiC

    International Nuclear Information System (INIS)

    Knorr, J.; Lippmann, W.; Reinecke, A.M.; Wolf, R.; Rasper, R.; Kerber, A.; Wolter, A.

    2005-01-01

    Laser beam joining has numerous advantages over other methods presently known. After having been developed successful for brazing silicon carbide for high temperature applications, this technology is now also available for silicon nitride. Thus the field of application of SiC and Si 3 N 4 which are very interesting materials for the nuclear sector is considerably extended thanks to this new technology. Ceramic encapsulation of fuel and absorber increases the margins for operation at very high temperatures. Additionally, without ceramic encapsulation of the main core components, it will be difficult to continue claiming non-catastrophic behaviour for the (V)HTR. (orig.)

  9. Complex Fibroadenoma and Breast Cancer Risk: A Mayo Clinic Benign Breast Disease Cohort Studya

    Science.gov (United States)

    Nassar, Aziza; Visscher, Daniel W.; Degnim, Amy C.; Frank, Ryan D.; Vierkant, Robert A.; Frost, Marlene; Radisky, Derek C.; Vachon, Celine M.; Kraft, Ruth A.; Hartmann, Lynn C.; Ghosh, Karthik

    2015-01-01

    Purpose To examine the breast cancer risk overall among women with simple fibroadenoma or complex fibroadenoma and to examine the association of complex fibroadenoma with breast cancer through stratification of other breast cancer risks. Methods The study included women aged 18 to 85 years from the Mayo Clinic Benign Breast Disease Cohort who underwent excisional breast biopsy from 1967 through 1991. Within this cohort, women who had fibroadenoma were compared to women who did not have fibroadenoma. Breast cancer risk (observed vs expected) across fibroadenoma levels was assessed through standardized incidence ratios (SIRs) by using age- and calendar-stratified incidence rates from the Iowa Surveillance, Epidemiology, and End Results registry. Analyses were performed overall, within subgroups of involution status, with other demographic characteristics (age, year of biopsy, indication for biopsy, and family history), and with histologic characteristics, including overall impression (nonproliferative disease, proliferative disease without atypia [PDWA], or atypical hyperplasia). Results Fibroadenoma was identified in 2,136 women (noncomplex, 1,835 [85.9%]; complex, 301 [14.1%]). SIR for noncomplex fibroadenoma was 1.49 (95% CI, 1.26–1.74); for complex fibroadenoma, it was 2.27 (95% CI, 1.63–3.10) (test for heterogeneity in SIR, P=.02). However, women with complex fibroadenoma were more likely to have other, concomitant high-risk histologic characteristics (eg, incomplete involution and PDWA). In analyses stratified by involution status and PDWA, complex fibroadenoma was not an independent risk marker for breast cancer. Conclusions Complex fibroadenoma does not confer increased breast cancer risk beyond other established histologic characteristics. PMID:26264469

  10. Complex fibroadenoma and breast cancer risk: a Mayo Clinic Benign Breast Disease Cohort Study.

    Science.gov (United States)

    Nassar, Aziza; Visscher, Daniel W; Degnim, Amy C; Frank, Ryan D; Vierkant, Robert A; Frost, Marlene; Radisky, Derek C; Vachon, Celine M; Kraft, Ruth A; Hartmann, Lynn C; Ghosh, Karthik

    2015-09-01

    The purpose of this study is to examine the breast cancer risk overall among women with simple fibroadenoma or complex fibroadenoma and to examine the association of complex fibroadenoma with breast cancer through stratification of other breast cancer risks. The study included women aged 18-85 years from the Mayo Clinic Benign Breast Disease Cohort who underwent excisional breast biopsy from 1967 through 1991. Within this cohort, women who had fibroadenoma were compared to women who did not have fibroadenoma. Breast cancer risk (observed versus expected) across fibroadenoma levels was assessed through standardized incidence ratios (SIRs) by using age- and calendar-stratified incidence rates from the Iowa Surveillance, Epidemiology, and End Results registry. Analyses were performed overall, within subgroups of involution status, with other demographic characteristics (age, year of biopsy, indication for biopsy, and family history), and with histologic characteristics, including overall impression [nonproliferative disease, proliferative disease without atypia (PDWA), or atypical hyperplasia]. Fibroadenoma was identified in 2136 women [noncomplex, 1835 (85.9%); complex, 301 (14.1%)]. SIR for noncomplex fibroadenoma was 1.49 (95% CI 1.26-1.74); for complex fibroadenoma, it was 2.27 (95% CI 1.63-3.10) (test for heterogeneity in SIR, P = .02). However, women with complex fibroadenoma were more likely to have other, concomitant high-risk histologic characteristics (e.g., incomplete involution and PDWA). In analyses stratified by involution status and PDWA, complex fibroadenoma was not an independent risk marker for breast cancer. Complex fibroadenoma does not confer increased breast cancer risk beyond other established histologic characteristics.

  11. Development of an Educational Game to Set Up Surgical Instruments on the Mayo Stand or Back Table: Applied Research in Production Technology.

    Science.gov (United States)

    Paim, Crislaine Pires Padilha; Goldmeier, Silvia

    2017-01-10

    Existing research suggests that digital games can be used effectively for educational purposes at any level of training. Perioperative nursing educators can use games to complement curricula, in guidance and staff development programs, to foster team collaboration, and to give support to critical thinking in nursing practice because it is a complex environment. To describe the process of developing an educational game to set up surgical instruments on the Mayo stand or back table as a resource to assist the instructor in surgical instrumentation training for students and nursing health professionals in continued education. The study was characterized by applied research in production technology. It included the phases of analysis and design, development, and evaluation. The objectives of the educational game were developed through Bloom's taxonomy. Parallel to the physical development of the educational game, a proposed model for the use of digital elements in educational game activities was applied to develop the game content. The development of the game called "Playing with Tweezers" was carried out in 3 phases and was evaluated by 15 participants, comprising students and professional experts in various areas of knowledge such as nursing, information technology, and education. An environment was created with an initial screen, menu buttons containing the rules of the game, and virtual tour modes for learning and assessment. The "digital" nursing student needs engagement, stimulation, reality, and entertainment, not just readings. "Playing with Tweezers" is an example of educational gaming as an innovative teaching strategy in nursing that encourages the strategy of involving the use of educational games to support theoretical or practical classroom teaching. Thus, the teacher does not work with only 1 type of teaching methodology, but with a combination of different methodologies. In addition, we cannot forget that skill training in an educational game does not

  12. XRCC1 suppresses somatic hypermutation and promotes alternative nonhomologous end joining in Igh genes.

    Science.gov (United States)

    Saribasak, Huseyin; Maul, Robert W; Cao, Zheng; McClure, Rhonda L; Yang, William; McNeill, Daniel R; Wilson, David M; Gearhart, Patricia J

    2011-10-24

    Activation-induced deaminase (AID) deaminates cytosine to uracil in immunoglobulin genes. Uracils in DNA can be recognized by uracil DNA glycosylase and abasic endonuclease to produce single-strand breaks. The breaks are repaired either faithfully by DNA base excision repair (BER) or mutagenically to produce somatic hypermutation (SHM) and class switch recombination (CSR). To unravel the interplay between repair and mutagenesis, we decreased the level of x-ray cross-complementing 1 (XRCC1), a scaffold protein involved in BER. Mice heterozygous for XRCC1 showed a significant increase in the frequencies of SHM in Igh variable regions in Peyer's patch cells, and of double-strand breaks in the switch regions during CSR. Although the frequency of CSR was normal in Xrcc1(+/-) splenic B cells, the length of microhomology at the switch junctions decreased, suggesting that XRCC1 also participates in alternative nonhomologous end joining. Furthermore, Xrcc1(+/-) B cells had reduced Igh/c-myc translocations during CSR, supporting a role for XRCC1 in microhomology-mediated joining. Our results imply that AID-induced single-strand breaks in Igh variable and switch regions become substrates simultaneously for BER and mutagenesis pathways.

  13. Social Pharmacy and Clinical Pharmacy-Joining Forces.

    Science.gov (United States)

    Almarsdottir, Anna Birna; Granas, Anne Gerd

    2015-12-22

    This commentary seeks to define the areas of social pharmacy and clinical pharmacy to uncover what they have in common and what still sets them apart. Common threats and challenges of the two areas are reviewed in order to understand the forces in play. Forces that still keep clinical and social pharmacy apart are university structures, research traditions, and the management of pharmacy services. There are key (but shrinking) differences between clinical and social pharmacy which entail the levels of study within pharmaceutical sciences, the location in which the research is carried out, the choice of research designs and methods, and the theoretical foundations. Common strengths and opportunities are important to know in order to join forces. Finding common ground can be developed in two areas: participating together in multi-disciplinary research, and uniting in a dialogue with internal and external key players in putting forth what is needed for the profession of pharmacy. At the end the question is posed, "What's in a name?" and we argue that it is important to emphasize what unifies the families of clinical pharmacy and social pharmacy for the benefit of both fields, pharmacy in general, and society at large.

  14. Polyphenolic substrates and dyes degradation by yeasts from 25 de Mayo/King George Island (Antarctica).

    Science.gov (United States)

    Rovati, José I; Pajot, Hipólito F; Ruberto, Lucas; Mac Cormack, Walter; Figueroa, Lucía I C

    2013-11-01

    Antarctica offers a range of extreme climatic conditions, such as low temperatures, high solar radiation and low nutrient availability, and constitutes one of the harshest environments on Earth. Despite that, it has been successfully colonized by ’cold-loving’ fungi, which play a key role in decomposition cycles in cold ecosystems. However, knowledge about the ecological role of yeasts in nutrient or organic matter recycling/mineralization remains highly fragmentary. The aim of this work was to study the yeast microbiota in samples collected on 25 de Mayo/King George Island regarding the scope of their ability to degrade polyphenolic substrates such as lignin and azo dyes. Sixty-one yeast isolates were obtained from 37 samples, including soil, rocks, wood and bones. Molecular analyses based on rDNA sequences revealed that 35 yeasts could be identified at the species level and could be classified in the genera Leucosporidiella, Rhodotorula, Cryptococcus, Bullera and Candida. Cryptococcus victoriae was by far the most ubiquitous species. In total, 33% of the yeast isolates examined showed significant activity for dye decolorization, 25% for laccase activity and 38% for ligninolytic activity. Eleven yeasts did not show positive activity in any of the assays performed and no isolates showed positive activity across all tested substrates. A high diversity of yeasts were isolated in this work, possibly including undescribed species and conspicuous Antarctic yeasts, most of them belonging to oligotrophic, slow-growing and metabolically diverse basidiomycetous genera.

  15. Reconciliación de Malí; mayo en Kidal, inflexión en la segunda fase del proceso

    Directory of Open Access Journals (Sweden)

    Juan Carlos Castilla

    2015-01-01

    Full Text Available La reconciliación es uno de los retos de la consolidación de la paz. El ejercicio de la soberanía por parte de las instituciones locales, puede originar diferencias con las organizaciones internacionales durante la transformación del conflicto. El desafío es coordinar estrategias y medidas en el tiempo. El proceso de reconciliación comenzó en Malí con un gobierno de transición. Durante el año 2014, el gobierno ha tratado de impulsar el proceso, en un contexto en el que se han reproducido los enfrentamientos tribales, se han dado nuevos choques entre el MNLA y las Fuerzas Armadas malíes, y dónde sigue influyendo la actividad terrorista yihadista. IBK se refirió a aspectos fundamentales para el futuro inmediato del proceso tras los acontecimientos de mayo en Kidal. Tras estos acontecimientos, las negociaciones de paz se desarrollan con la mediación argelina. La complementariedad entre la justicia nacional y la internacional será una de las claves, lo que a su vez puede interrelacionar con la potencial re-integración futura de excombatientes.

  16. Factores que interviene en la aplicación de medidas de bioseguridad del profesional de enfermería del Servicio de Centro Quirúrgico del Hospital Nacional Dos de Mayo

    OpenAIRE

    Camacuari Cárdenas, Feliman Salome

    2017-01-01

    Determina los factores que intervienen en la aplicación de medidas de bioseguridad del profesional de enfermería del Servicio de Centro Quirúrgico (SCQ) del Hospital Nacional Dos de Mayo (HNDM). Estudio de tipo cuantitativo, método descriptivo de corte transversal. La población en estudio está constituida por 30 profesionales de enfermería que laboran en el SCQ. La técnica utilizada es la encuesta y el instrumento un cuestionario estructurado. Se llega a la conclusión que los factores desfavo...

  17. Altered kinetics of nonhomologous end joining and class switch recombination in ligase IV-deficient B cells.

    Science.gov (United States)

    Han, Li; Yu, Kefei

    2008-11-24

    Immunoglobulin heavy chain class switch recombination (CSR) is believed to occur through the generation and repair of DNA double-strand breaks (DSBs) in the long and repetitive switch regions. Although implied, the role of the major vertebrate DSB repair pathway, nonhomologous end joining (NHEJ), in CSR has been controversial. By somatic gene targeting of DNA ligase IV (Lig4; a key component of NHEJ) in a B cell line (CH12F3) capable of highly efficient CSR in vitro, we found that NHEJ is required for efficient CSR. Disruption of the Lig4 gene in CH12F3 cells severely inhibits the initial rate of CSR and causes a late cell proliferation defect under cytokine stimulation. However, unlike V(D)J recombination, which absolutely requires NHEJ, CSR accumulates to a substantial level in Lig4-null cells. The data revealed a fast-acting NHEJ and a slow-acting alterative end joining of switch region breaks during CSR.

  18. Non-homologous end-joining genes are not inactivated in human radiation-induced sarcomas with genomic instability

    International Nuclear Information System (INIS)

    Lefevre, S.H.; Coquelle, A.; Gonin-Laurent, N.

    2005-01-01

    DNA double-strand break (DSB) repair pathways are implicated in the maintenance of genomic stability. However the alterations of these pathways, as may occur in human tumor cells with strong genomic instability, remain poorly characterized. We analyzed the loss of heterozygosity (LOH) and the presence of mutations for a series of genes implicated in DSB repair by non-homologous end-joining in five radiation-induced sarcomas devoid of both active Tp53 and Rb1. LOH was recurrently observed for 8 of the 9 studied genes (KU70, KU80, XRCC4, LIG4, Artemis, MRE11, RAD50, NBS1) but not for DNA-PKcs. No mutation was found in the remaining allele of the genes with LOH and the mRNA expression did not correlate with the allelic status. Our findings suggest that non-homologous end-joining repair pathway alteration is unlikely to be involved in the high genomic instability observed in these tumors. (author)

  19. Rasch measurement analysis of the Mayo-Portland Adaptability Inventory (MPAI-4) in a community-based rehabilitation sample.

    Science.gov (United States)

    Kean, Jacob; Malec, James F; Altman, Irwin M; Swick, Shannon

    2011-05-01

    The precise measurement of patient outcomes depends upon clearly articulated constructs and refined clinical assessment instruments that work equally well for all subgroups within a population. This is a challenging task in those with acquired brain injury (ABI) because of the marked heterogeneity of the disorder and subsequent outcomes. Although essential, the iterative process of instrument refinement is often neglected. This present study was undertaken to examine validity, reliability, dimensionality and item estimate invariance of the Mayo-Portland Adaptability Inventory - 4 (MPAI-4), an outcome measure for persons with ABI. The sampled population included 603 persons with traumatic ABI participating in a home- and community-based rehabilitation program. Results indicated that the MPAI-4 is a valid, reliable measure of outcome following traumatic ABI, which measures a broad but unitary core construct of outcome after ABI. Further, the MPAI-4 is composed of items that are unbiased toward selected subgroups except where differences could be expected [e.g., more chronic traumatic brain injury (TBI) patients are better able to negotiate demands of transportation than more acute TBI patients]. We address the trade-offs between strict unidimensionality and clinical applicability in measuring outcome, and illustrate the advantages and disadvantages of applying single-parameter measurement models to broad constructs.

  20. Environmental pollution in Mayo area and its impact on people health

    International Nuclear Information System (INIS)

    Omer, N. H.

    2003-04-01

    The study undertook the pollution problem in Mayo area, south of the Green Belt. This is considered to have come about as a result of legal and illegal planning and the re-planning of the squatter settlements, plus the area that lies in the vicinity of the sanitary drainage pool. The study identified the factors and causes of the pollutants.The study also studied the effects of these pollutants on health. The objectives of the study were to identify the factors of environmental pollution in the area, the role of the people in the environmental pollution, the negative consequences of this pollution on people in the area, the attempts of the local authorities in fighting the area's pollution and improving the habitat. The study depended on some scientific approaches such as the historic method and the descriptive statistics method. Information was collected from primary and secondary sources. The researcher depended on field work such as direct observation, personal interviews and filling questionnaire which were prepared for data allocation. The study concluded that the environmental pollution is an out come of many factors that inter link with each other. One of the most important factors is the low economic level of the people, and its effects on the poor and deteriorating living environment and the planning of the area placing it near the sources of environmental pollution at the green belt. In addition to the negative role played by the areas inhabitants in relation to getting rid of environmental pollutants of the area, which has in turn led to the outbreak of environmental diseases that reside in the area, specially malaria and diarrhea. The researcher views that one of the most important recommendations that this study has come out of with is the general planning that takes into consideration the health, economic natural and environmental aspects. These are necessities that will participate in the decline and end of the spreading of these pollutants and what